WorldWideScience

Sample records for preliminary baked-contact test

  1. Paleointensities From a Baked Contact: a Multi-Method Experiment

    Science.gov (United States)

    Bohnel, H.; Herrero-Bervera, E.; Hill, M. J.; Yamamoto, Y.

    2011-12-01

    The baked contact test is traditionally used to prove the origin of a NRM in old rocks. It consists in the comparison of the NRM from an igneous rock with that of the rock which has been reheated by that igneous rock. In the vicinity of the City of Queretaro (Mexico) such a situation is given by an upper Tertiary lava flow which has reheated profoundly underlying lake/alluvial sediments. This situation was deemed to be ideal for testing different PI methods, as the lava flow and baked sediments are thought to have different rock magnetic properties, but should have recorded the same paleointensity. As the success of paleointensity experiments is often dependent on the rock magnetic properties, such a situation may provide information about the conditions that may be responsible for the success or failure in a particular PI method. The PI methods applied to the lava and sediment rocks are: Thellier-Coe, microwave, multi-specimen pTRM, LTD-DHT Shaw.

  2. Rock magnetic and paleointensity results from Mesozoic baked contacts of Armenia

    Science.gov (United States)

    Shcherbakova, V. V.; Perrin, M.; Shcherbakov, V. P.; Pavlov, V. E.; Ayvaz'yan, A.; Zhidkov, G. V.

    2009-01-01

    Samples were obtained from three baked contacts and one lava flow along the upper Turonian-lower Coniacian Tovuz section, two baked contacts along the upper Coniacian-lower Santonian Paravakar section in the northern part of Armenia, and three baked contacts along the Titonian-Valanginian Kafan section in southern Armenia. A total of 130 samples were studied. Updated mean paleomagnetic poles were calculated for the Upper Cretaceous Tovuz-Paravakar sections (65.6°N, 162.2°E, A95 = 4.3, paleolatitude = 27.0 ± 3.4°) and the Upper Jurassic-Lower Cretaceous Kafan section (61.7°N, 158.9°E, A95 = 4.8°, paleolatitude = 24.7 ± 3.8°). Paleointensity determinations could be estimated from two of the upper Cretaceous and three of the Upper Jurassic-Lower Cretaceous baked contacts, corresponding to a 30% success rate. The mean virtual dipole moments obtained were low (1.7-5.5 × 1022 A m2), which is in agreement with data published by Bol'shakov and Solodovnikov (1981a, 1983) for the same sections (3.0-4.4 × 1022 A m2). Our results support the hypothesis of the Mesozoic Dipole Low, even though the overall data are widely dispersed.

  3. Preliminary Results of Field Emission Cathode Tests

    Science.gov (United States)

    Sovey, James S.; Kovaleski, Scott D.

    2001-01-01

    Preliminary screening tests of field emission cathodes such as chemical vapor deposited (CVD) diamond, textured pyrolytic graphite, and textured copper were conducted at background pressures typical of electric thruster test facilities to assess cathode performance and stability. Very low power electric thrusters which provide tens to hundreds micronewtons of thrust may need field emission neutralizers that have a capability of tens to hundreds of microamperes. From current voltage characteristics, it was found that the CVD diamond and textured metals cathodes clearly satisfied the Fowler-Nordheim emission relation. The CVD diamond and a textured copper cathode had average current densities of 270 and 380 mA/sq cm, respectively, at the beginning-of-life. After a few hours of operation the cathode emission currents degraded by 40 to 75% at background pressures in the 10(exp -5) Pa to 10(exp -4) Pa range. The textured pyrolytic graphite had a modest current density at beginning-of-life of 84 mA/sq cm, but this cathode was the most stable of all. Extended testing of the most promising cathodes is warranted to determine if current degradation is a burn-in effect or whether it is a long-term degradation process. Preliminary experiments with ferroelectric emission cathodes, which are ceramics with spontaneous electric polarization, were conducted. Peak current densities of 30 to 120 mA/sq cm were obtained for pulse durations of about 500 ns in the 10(exp -4) Pa pressure range.

  4. Preliminary test results for the SVX4

    Energy Technology Data Exchange (ETDEWEB)

    Christofek, L.; Hanagaki, K.; Rapidis, P.; Utes, M.; /Fermilab

    2005-06-01

    We present and summarize the preliminary test results for SVX4 chip testing. There are presently two versions of the SVX4. Version 2 has on-chip bypassing and Version 1 does not. The on-chip bypassing is a layer of transistors under the front-end analog pipeline that acts as a bypassing capacitor for the voltage supply. Its size is about a microfarad. We aggressively choose to test Version 2 because of this feature. The feature is advantageous for hybrid design because it eliminates the need for an additional passive component on the hybrid itself by placing it on the actual SVX4 die. Also, the SVX4 was designed to operate in two modes: D. and CDF. One can set which mode the chip will operate by placing a jumper in the proper position on the SVX4 chip carrier. In either mode, the chip can either use the operating parameters from the shift register or the shadow register. Similarly, this is selected by placing a jumper on the SVX4 chip carrier. This chip has this feature because it was unknown whether the new design of the shadow register would be operable. The shadow register is also call the SEU register or Single Event Upset register. An introduction into the functionality of the chip and an explanation on the difference between D. and CDF mode can be found in the SVX4 User's Manual [1].

  5. Preliminary results of steel containment vessel model test

    Energy Technology Data Exchange (ETDEWEB)

    Luk, V.K.; Hessheimer, M.F. [Sandia National Labs., Albuquerque, NM (United States); Matsumoto, T.; Komine, K.; Arai, S. [Nuclear Power Engineering Corp., Tokyo (Japan); Costello, J.F. [Nuclear Regulatory Commission, Washington, DC (United States)

    1998-04-01

    A high pressure test of a mixed-scaled model (1:10 in geometry and 1:4 in shell thickness) of a steel containment vessel (SCV), representing an improved boiling water reactor (BWR) Mark II containment, was conducted on December 11--12, 1996 at Sandia National Laboratories. This paper describes the preliminary results of the high pressure test. In addition, the preliminary post-test measurement data and the preliminary comparison of test data with pretest analysis predictions are also presented.

  6. Testing the Preliminary X-33 Navigation System

    Science.gov (United States)

    Lomas, James J.; Mitchell, Daniel W.; Freestone, Todd M.; Lee, Charles; Lessman, Craig; Foster, Lee D. (Technical Monitor)

    2001-01-01

    The X-33 Reusable Launch Vehicle (RLV) must meet the demanding requirements of landing autonomously on a narrow landing strip following a flight that reaches an altitude of up to 200,000 feet and a speed in excess of Mach 9 with significant in-flight energy bleed-off maneuvers. To execute this flight regimen a highly reliable avionics system has been designed that includes three LN-100G Inertial Navigation System/Global Positioning System (INS/GPS) units as the primary navigation system for the X-33. NASA's Marshall Space Flight Center (MSFC) tested an INS/GPS system in real-time simulations to determine the ability of this navigation suite to meet the in flight and autonomous landing requirements of the X-33 RLV. A total of sixty-one open loop tests were performed to characterize the navigation accuracy of the LN-100G. Twenty-seven closed-loop tests were also performed to evaluate the performance of the X-33 Guidance, Navigation and Control (GN&C) algorithms with the real navigation hardware. These closed-loop tests were also designed to expose any integration or operational issues with the real-time X-33 vehicle simulation. Dynamic road tests of the INS/GPS were conducted by Litton to assess the performance of differential and nondifferential INS/GPS hybrid navigation solutions. The results of the simulations and road testing demonstrate that this novel solution is capable of meeting the demanding requirements of take-off, in-flight navigation, and autonomous landing of the X-33 RLV. This paper describes the test environment developed to stimulate the LN-100G and discusses the results of this test effort. This paper also presents recommendations for a navigation system suitable to an operational RLV system.

  7. Preliminary Test for Nonlinear Input Output Relations in SISO Systems

    DEFF Research Database (Denmark)

    Knudsen, Torben

    2000-01-01

    This paper discusses and develops preliminary statistical tests for detecting nonlinearities in the deterministic part of SISO systems with noise. The most referenced method is unreliable for common noise processes as e.g.\\ colored. Therefore two new methods based on superposition and sinus input...

  8. The picture test of separation and individuation - preliminary research

    OpenAIRE

    Gregor Žvelc; Maša Žvelc

    2000-01-01

    Authors introduce a new instrument, which they developed for measuring separation and individuation process and attachment in adolescence and adulthood. The Picture Test of Separation and Individuation (PTSI) is a semi–projective test. It consists of various pictures, which represent relationships with significant others. PTSI is divided into three subtests: Relationship with Mother, Relationship with Father and Attachment. In a preliminary research on a sample of college and university...

  9. Definition study for an extended manned test of a regenerative life support system, preliminary test plan

    Science.gov (United States)

    1971-01-01

    A preliminary plan and procedure are presented for conducting an extended manned test program for a regenerative life support system. Emphasis will be placed on elements associated with long-term system operation and long-term uninterrupted crew confinement.

  10. The picture test of separation and individuation - preliminary research

    Directory of Open Access Journals (Sweden)

    Gregor Žvelc

    2000-06-01

    Full Text Available Authors introduce a new instrument, which they developed for measuring separation and individuation process and attachment in adolescence and adulthood. The Picture Test of Separation and Individuation (PTSI is a semi–projective test. It consists of various pictures, which represent relationships with significant others. PTSI is divided into three subtests: Relationship with Mother, Relationship with Father and Attachment. In a preliminary research on a sample of college and university students authors studied basic properties of the test. The results of the research indicate that PTSI is consistent with theoretical background, has good sensitivity and is economical. The Picture Test of Separation and Individuation enables quick but complex insight into individual's relationships with significant others as well as into his/her stage of separation and individuation process. Considering satisfying results of pilot study, authors suggest further research for validation of the test.

  11. Modeling and Testing of EVs - Preliminary Study and Laboratory Development

    DEFF Research Database (Denmark)

    Yang, Guang-Ya; Marra, Francesco; Nielsen, Arne Hejde

    2010-01-01

    impact at different geographical areas, as well as driving and charging patterns. Electric circuit model is deployed in this work to represent the electrical properties of a lithium-ion battery. This paper reports the preliminary modeling and validation work based on manufacturer data sheet and realistic......Electric vehicles (EVs) are expected to play a key role in the future energy management system to stabilize both supply and consumption with the presence of high penetration of renewable generation. A reasonably accurate model of battery is a key element for the study of EVs behavior and the grid...... tests, followed by the suggestions towards a feasible battery model for further studies....

  12. Design and preliminary testing of the RIC hybrid knee prosthesis.

    Science.gov (United States)

    Lenzi, T; Sensinger, J; Lipsey, J; Hargrove, L; Kuiken, T

    2015-08-01

    We present a novel hybrid knee prosthesis that uses a motor, transmission and control system only for active dynamics tasks, while relying on a spring/damper system for passive dynamics activities. Active dynamics tasks require higher torque, lower speed, and occur less frequently than passive dynamic activities. By designing the actuation system around active tasks alone, we achieved a lightweight design (1.7 Kg w/o battery) without sacrificing peak torque (85Nm repetitive). Preliminary tests performed by an able-bodied person using a bypass orthosis show that the hybrid knee can support reciprocal stairs ambulation with low electrical energy consumption.

  13. Preliminary Design of a LSA Aircraft Using Wind Tunnel Tests

    Directory of Open Access Journals (Sweden)

    Norbert ANGI

    2015-12-01

    Full Text Available This paper presents preliminary results concerning the design and aerodynamic calculations of a light sport aircraft (LSA. These were performed for a new lightweight, low cost, low fuel consumption and long-range aircraft. The design process was based on specific software tools as Advanced Aircraft Analysis (AAA, XFlr 5 aerodynamic and dynamic stability analysis, and Catia design, according to CS-LSA requirements. The calculations were accomplished by a series of tests performed in the wind tunnel in order to assess experimentally the aerodynamic characteristics of the airplane.

  14. Preliminary wind tunnel tests on the pedal wind turbine

    Science.gov (United States)

    Vinayagalingam, T.

    1980-06-01

    High solidity-low speed wind turbines are relatively simple to construct and can be used advantageously in many developing countries for such direct applications as water pumping. Established designs in this class, such as the Savonius and the American multiblade rotors, have the disadvantage that their moving surfaces require a rigid construction, thereby rendering large units uneconomical. In this respect, the pedal wind turbine recently reported by the author and which incorporates sail type rotors offers a number of advantages. This note reports preliminary results from a series of wind tunnel tests which were carried out to assess the aerodynamic torque and power characteristics of the turbine.

  15. Preliminary Feasibility Testing of the BRIC Brine Water Recovery Concept

    Science.gov (United States)

    Callahan, Michael R.; Pensinger, Stuart; Pickering, Karen D.

    2011-01-01

    The Brine Residual In-Containment (BRIC) concept was developed as a new technology to recover water from spacecraft wastewater brines. Such capability is considered critical to closing the water loop and achieving a sustained human presence in space. The intention of the BRIC concept is to increase the robustness and efficiency of the dewatering process by performing drying inside the container used for the final disposal of the residual brine solid. Recent efforts in the development of BRIC have focused on preliminary feasibility testing using a laboratory- assembled pre-prototype unit. Observations of the drying behavior of actual brine solutions processed under BRIC-like conditions has been of particular interest. To date, experiments conducted with three types of analogue spacecraft wastewater brines have confirmed the basic premise behind the proposed application of in-place drying for these solutions. Specifically, the dried residual mass from these solutions have tended to exhibit characteristics of adhesion and flow that are expected to continue to challenge process stream management in spacecraft brine dewatering system designs. Yet, these same characteristics may favor the development of capillary- and surface-tension-based approaches envisioned as part of an ultimate microgravity-compatible BRIC design. In addition, preliminary feasibility testing of the BRIC pre-prototype confirmed that high rates of water recovery, up to 98% of the available brine water, may be possible while still removing the majority of the brine contaminants from the influent brine stream. These and other observations from testing are reported.

  16. Solar Stirling power generation - Systems analysis and preliminary tests

    Science.gov (United States)

    Selcuk, M. K.; Wu, Y.-C.; Moynihan, P. I.; Day, F. D., III

    1977-01-01

    The feasibility of an electric power generation system utilizing a sun-tracking parabolic concentrator and a Stirling engine/linear alternator is being evaluated. Performance predictions and cost analysis of a proposed large distributed system are discussed. Design details and preliminary test results are presented for a 9.5 ft diameter parabolic dish at the Jet Propulsion Laboratory (Caltech) Table Mountain Test Facility. Low temperature calorimetric measurements were conducted to evaluate the concentrator performance, and a helium flow system is being used to test the solar receiver at anticipated working fluid temperatures (up to 650 or 1200 C) to evaluate the receiver thermal performance. The receiver body is designed to adapt to a free-piston Stirling engine which powers a linear alternator assembly for direct electric power generation. During the next phase of the program, experiments with an engine and receiver integrated into the concentrator assembly are planned.

  17. Design and preliminary test results of Daya Bay RPC modules*

    Energy Technology Data Exchange (ETDEWEB)

    Hackenburg, R.

    2011-09-01

    Resistive Plate Chamber (RPC) modules will be used as one part of the cosmic muon veto system in the Daya Bay reactor neutrino experiment. A total of 189 RPC modules will cover the three water pools in the experiment. To achieve track reconstruction and high efficiency, each module consists of 4 layers, each of which contains two sizes of bare chambers. The placement of bare chambers is reversed in different layers to reduce the overlapping dead areas. The module efficiency and patch efficiency were studied both in simulation and test of the data analysis. 143 modules have been constructed and tested. The preliminary study shows that the module and patch 3 out of 4 layers efficiency reaches about 98%.

  18. Design and preliminary test results of Daya Bay RPC modules

    Institute of Scientific and Technical Information of China (English)

    XU Ji-Lei; Logan Lebanowski; Cullen Newsom; Lin Shih-Kai; Jonathan Link; MA Lie-Hua; Viktor Pě(c); Vit Vorobel; CHEN Jin; LIU Jin-Chang; ZHOU Yong-Zhao; GUAN Meng-Yun; LIANG Hao; YANG Chang-Gen; WANG Yi-Fang; ZHANG Jia-Wen; LU Chang-Guo; Kirk McDonald; Robert Hackenburg; Kwong Lau

    2011-01-01

    Resistive Plate Chamber(RPC)modules will be used as one part of the cosmic muon veto system in the Days Bay reactor neutrino experiment.A total of 189 RPC modules will cover the three water pools in the experiment.To achieve track reconstruction and high efficiency,each module consists of 4 layers,each of which contains two sizes of bare chambers.The placement of bare chambers is reversed in different layers to reduce the overlapping dead areas.The module efficiency and patch efficiency were studied both in simulation and test of the data analysis.143 modules have been constructed and tested.The preliminary study shows that the module and patch 3 out of 4 layers efficiency reaches about 98%.

  19. Preliminary dimensioning of the IFMIF Tritium Release Test Module

    Energy Technology Data Exchange (ETDEWEB)

    Arbeiter, Frederik, E-mail: frederik.arbeiter@kit.edu; Abou-Sena, Ali; Chen, Yuming; Freund, Jana; Klix, Axel; Kondo, Keitaro; Vladimirov, Pavel

    2013-10-15

    Highlights: • The design of the IFMIF Tritium Release Test Module is explained. • Nuclear responses in the module and specimens are calculated. • Temperature fields during irradiation are calculated by 1D methods. • The tritium budget is calculated by 1D methods. -- Abstract: As part of the ongoing Engineering Validation and Engineering Design Activities for the International Fusion Materials Irradiation Facility (IFMIF), an experimental device suitable for the irradiation and online tritium release measurements of solid breeder ceramics and beryllium is investigated. This experimental device is called the Tritium Release Test Module (TRTM). In the preliminary design phase, the possible thermal conditions, the tritium diffusion budgets, and the mechanical loads have been studied by analytical calculations and numerical codes. The most important results concern the tritium production and nuclear heating induced in the structures, the temperature distribution in the specimen region and the structure, and the diffusion of tritium through the safety barriers.

  20. Results of Preliminary Tests of PAR Bunch Cleaning

    CERN Document Server

    Yao, Chihyuan; Grelick, Arthur; Lumpkin, Alex H; Sereno, Nicholas S

    2005-01-01

    A particle accumulator ring (PAR) is used at the Advanced Photon Source (APS) to collect multiple linac bunches and compress them into a 0.3-ns (rms) single bunch for booster injection. A 9.77-MHz fundamental rf system and a 117.3-MHz harmonic rf system are employed for initial beam capture and bunch length compression. Satellite bunches with very low charge form due to rf phase drifts or beam loading change. These satellites, when injected into the booster and then into the storage ring (SR), cause bunch impurity at three buckets from the target bucket. Storage ring and booster bunch cleaning was tried but proved to be difficult due to the top-up mode of operation in the storage ring and tune drift in the booster synchrotron. Recently we implemented a PAR bunch-cleaning system with tune-modulated harmonic rf knockout. Preliminary tests gave a measured SR bunch purity of better than 10

  1. Installation of ECR2 at LNS and Preliminary tests

    CERN Document Server

    Gammino, S; Ciavola, G; Castro, M; Chines, F; Marletta, S; Bieth, C; Sortais, P; Kantas, S

    1999-01-01

    The source ECR2 has been built in 1998 by Pantechnik, according to the design suggested by LNS Ion Source Group. This design entails some improvements with respect to a standard CAPRICE-type source: a) the magnetic field (up to 1.6 T axial, 1.1 T radial) allows to operate the source at 14 GHz in High B mode and at 18 GHz; b) two frequency heating can be used; c) an aluminum made plasma chamber is used in place of the stainless steel one. The main features of ECR2 along with a review of the preliminary tests will be outlined. Typical currents for fully stripped nitrogen are about 25 emA; for the heaviest ions, 1 emA of Kr28+ and 10 emA of Ta27+ have been measured. The installation at LNS has been completed recently and the details will be given.

  2. Thick Concrete Specimen Construction, Testing, and Preliminary Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Clayton, Dwight A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hoegh, Kyle [Univ. of Minnesota, Minneapolis, MN (United States); Khazanovich, Lev [Univ. of Minnesota, Minneapolis, MN (United States)

    2015-03-01

    The purpose of the U.S. Department of Energy Office of Nuclear Energy’s Light Water Reactor Sustainability (LWRS) Program is to develop technologies and other solutions that can improve the reliability, sustain the safety, and extend the operating lifetimes of nuclear power plants (NPPs) beyond 60 years. Since many important safety structures in an NPP are constructed of concrete, inspection techniques must be developed and tested to evaluate the internal condition. In-service containment structures generally do not allow for the destructive measures necessary to validate the accuracy of these inspection techniques. This creates a need for comparative testing of the various nondestructive evaluation (NDE) measurement techniques on concrete specimens with known material properties, voids, internal microstructure flaws, and reinforcement locations. A preliminary report detailed some of the challenges associated with thick reinforced concrete sections and prioritized conceptual designs of specimens that could be fabricated to represent NPP concrete structures for using in NDE evaluation comparisons. This led to the construction of the concrete specimen presented in this report, which has sufficient reinforcement density and cross-sectional size to represent an NPP containment wall. Details on how a suitably thick concrete specimen was constructed are presented, including the construction materials, final nominal design schematic, as well as formwork and rigging required to safely meet the desired dimensions of the concrete structure. The report also details the type and methods of forming the concrete specimen as well as information on how the rebar and simulated defects were embedded. Details on how the resulting specimen was transported, safely anchored, and marked to allow access for systematic comparative NDE testing of defects in a representative NPP containment wall concrete specimen are also given. Data collection using the MIRA Ultrasonic NDE equipment and

  3. [Peritoneal equilibration test: Conventional versus adapted. Preliminary study].

    Science.gov (United States)

    Zaloszyc, Ariane; Schmitt, Claus Peter; Schaefer, Betti; Doutey, Armelle; Terzic, Joëlle; Menouer, Soraya; Higel, Laetitia; Fischbach, Michel

    2017-02-01

    Conventional automated peritoneal dialysis (APD) is prescribed as a repetition of cycles with the same dwell time and the same fill volume. Water and sodium balance remains a common problem among patients on peritoneal dialysis. More recently, adapted automated peritoneal dialysis was described, as a combination of short dwells with a low volume, in order to enhance ultrafiltration, followed by long dwells with a large fill volume to favor solute removal. We performed a preliminary crossover study on 4 patients. The total amount of dialysate was the same, i.e. 2L/m(2) as well as the total duration of the test, i.e. 150 minutes. The conventional test was made with two identical cycles, each cycle had a fill volume of 1L/m(2) and a duration of 75 minutes, while the adapted test was performed with one short cycle, i.e. 30 minutes with a low fill volume, i.e. 0.6L/m(2), followed by a long cycle, i.e. 120 minutes, with a large fill volume, i.e. 1.4L/m(2). Sodium extraction was improved by 29.3mmol/m(2) (169%) in the adapted test in comparison to the conventional test. Ultrafiltration was enhanced by 159mL/m(2) (128%) in the adapted test compared to the conventional one. Glucose absorption was decreased by 35% in the adapted test in comparison to the conventional test and osmotic conductance was also improved. In conclusion, adapted dialysis may allow for a better volume and sodium balance, since we observed an improvement in sodium extraction and ultrafiltration. This pre-study authorizes an improvement of the European Pediatric Study's protocol on Adapted APD, already started and which will continue in the next months. Copyright © 2016 Association Société de néphrologie. Published by Elsevier SAS. All rights reserved.

  4. Platform for dynamic tests: preliminary studies, design and construction

    Directory of Open Access Journals (Sweden)

    J. E. Campuzano

    Full Text Available This paper is about the design and construction of a platform for dynamic tests especially with people jumping, walking, etc. Initially it was tried to find out projects already implemented in platforms and dynamic tests and to study the loads produced by movement of people on slabs and the structural response to these loads. The limits established by different standards have been also studied for these dynamic responses, taking into account the ultimate limit state, as well as the structure in service, since the human body is very sensitive to structural vibrations. Parametric studies were performed considering various configurations of slabs (different spans, thicknesses and conditions of support have been done, looking for a configuration that could have natural frequency close to the frequencies of the human loads. The slab should have dimensions compatible with the available physical space, fundamental frequency below 5 Hz and maximum immediate deflection compatible with the indications of the Brazilian standard NBR6118: 2007. Based on these criteria was chosen a rectangular structure consists of a solid reinforced concrete rectangular slab studded in two opposite edges of steel beams with shear connectors type U. The other two edges are free. The steel beams supporting the slab, in turn, are supported on eight metal profiles (two in each corner of the slab that are supported on two to two short columns of steel profile H. Profiles U in steel are welded to four columns, forming a horizontal frame. Numerical analysis of the dynamic test platform have been performed for free and forced vibration, for obtaining the natural frequencies and corresponding vibration modes, considering the self-weight of the structure and the load that simulates people's weight. After obtaining a structural configuration that fulfilled the stipulated requirements, the design of the slab taking into account the recommendations of the Brazilian standard NBR6118: 2007

  5. Environmental Survey preliminary report, Nevada Test Site, Mercury, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    1988-04-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Nevada Test Site (NTS), conducted June 22 through July 10, 1987. The Survey is being conducted by a multidisciplinary team of environmental specialists led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team members are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the NTS. The Survey covers all environment media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations and activities performed at the NTS, and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain environmental problems identified during its on-site activities. The Sampling and Analysis Plan is being executed by the Battelle Columbus Division under contract with DOE. When completed, the results will be incorporated into the NTS Environmental Survey Interim Report. The Interim Report will reflect the final determinations of the NTS Survey. 165 refs., 42 figs., 52 tabs.

  6. Preliminary Tests Of The Decris-sc Ion Source

    CERN Document Server

    Efremov, A; Bechterev, V; Bogomolov, S L; Bondarenko, P G; Datskov, V I; Dmitriev, S; Drobin, V; Lebedev, A; Leporis, M; Malinowski, H; Nikiforov, A; Paschenko, S V; Seleznev, V; Shishov, Yu A; Smirnov, Yu; Tsvineva, G; Yakovlev, B; Yazvitsky, N Yu

    2004-01-01

    A new "liquid He-free" superconducting Electron Cyclotron Resonance Ion Source DECRIS-SC, to be used as injector for the IC-100 small cyclotron, has been designed by FLNR and LHE JINR. The main feature is that a compact refrigerator of Gifford-McMahon type is used to cool the solenoid coils. For the reason of very small cooling power at 4.2 K (about 1 W) our efforts were to optimize the magnetic structure and minimize an external heating of the coils. The maximum magnetic field strength is 3 T and 2 T in injection and extraction region respectively. For the radial plasma confinement a hexapole made of NdFeB permanent magnet is used. The source will be capable of ECR plasma heating using different frequencies (14 GHz or 18 GHz). To be able to deliver usable intensities of solids, the design is also allow axial access for evaporation oven and metal samples using the plasma sputtering technique. Very preliminary results of the source test are presented.

  7. Accelerated stress testing of thin film solar cells: Development of test methods and preliminary results

    Science.gov (United States)

    Lathrop, J. W.

    1985-01-01

    If thin film cells are to be considered a viable option for terrestrial power generation their reliability attributes will need to be explored and confidence in their stability obtained through accelerated testing. Development of a thin film accelerated test program will be more difficult than was the case for crystalline cells because of the monolithic construction nature of the cells. Specially constructed test samples will need to be fabricated, requiring committment to the concept of accelerated testing by the manufacturers. A new test schedule appropriate to thin film cells will need to be developed which will be different from that used in connection with crystalline cells. Preliminary work has been started to seek thin film schedule variations to two of the simplest tests: unbiased temperature and unbiased temperature humidity. Still to be examined are tests which involve the passage of current during temperature and/or humidity stress, either by biasing in the forward (or reverse) directions or by the application of light during stress. Investigation of these current (voltage) accelerated tests will involve development of methods of reliably contacting the thin conductive films during stress.

  8. Preliminary test results from the CELSS Test Facility Engineering Development Unit

    Science.gov (United States)

    Kliss, Mark H.; Macelroy, R. D.; Blackwell, C. C.; Borchers, B. A.; Drews, M. E.; Longabaugh, J. R.; Yendler, B. S.; Zografos, A. I.

    1994-01-01

    As part of the NASA Controlled Ecological Life Support System (CELSS) Program, a CELSS Test Facility (CTF) is being planned for installation on the Space Station. The CTF will be used to provide data on the productivity and efficiency of a variety of CELSS higher plant crops grown in the microgravity environment of the Space Station. Tight environmental control will be maintained while data on gas exchange rates and biomass accumulation rates are collected. In order to obtain an early realistic determination of the subsystem and system requirements necessary to provide the environmental conditions specified for CTF crop productivity experiments, an Engineering Development Unit (EDU) has been designed, constructed and is in the process of subsystem and system testing at NASA Ames Research Center. The EDU is a ground test-bed which will be used to characterize the integrated performance of major subsystem technologies, to evaluate hardware candidates and control strategies required for the CTF, and to further define the ability to meet CTF requirements within present Space Station constraints. This paper reviews the functional requirements for the EDU, and focuses on the performance evaluation and test results of the various subsystems. Preliminary integrated performance results and control system operation are addressed, and plans for future science and technology testing are discussed.

  9. Description and Preliminary Testing of the CDSN Seismic Sensor Systems

    Science.gov (United States)

    Peterson, Jon; Tilgner, Edwin E.

    1985-01-01

    INTRODUCTION The China Digital Seismograph Network (CDSN) is being designed and installed to provide the People's Republic of China with the facilities needed to create a national digital database for earthquake research. The CDSN, which is being developed jointly by the PRC State Seismological Bureau and the U.S. Geological Survey, will consist initially of nine digitally-recording seismograph stations, a data management system to be used for compiling network-day tapes, and a depot maintenance center. Data produced by the network will be shared with research scientists throughout the world. A national seismograph network must be designed to support a variety of research objectives. From this standpoint, the choices and tradeoffs involved in specifying signal bandwidth, resolution, and dynamic range are the most important decisions in system design. As in the case of the CDSN, these decisions are made during the selection and design of the seismic sensor system and encoder components. The purpose of this report is to describe the CDSN sensor systems, their important signal characteristics, and the results of preliminary tests that have been performed on the instruments. Four overlapping data bands will be recorded at each station: short period (SP), broadband (BB), long period (LP), and very long period (VLP). Amplitude response curves are illustrated in Figure I. Vertical and horizontal components will be recorded for each data band. The SP and LP channels will be recorded with sufficient sensitivities to resolve earth background noise at seismically quiet sites. The BB channels will have a lower sensitivity and are intended for broadband recording of moderate-to-large body-wave signals and for increasing the effective amplitude range in the short- and long-period bands. The VLP channel does not provide additional spectral coverage at long periods; its purpose is to make use of on-site filtration and decimation to reduce post processing requirements for VLP

  10. Preliminary Test Estimators and Phi-divergence Measures in Pooling Binomial Data

    Directory of Open Access Journals (Sweden)

    N. Martin

    2012-07-01

    Full Text Available Two independent random samples are drawn from two Binomial populations with parameters theta1 and  theta2 respectively. Ahmed (1991 considered a preliminary test estimator based on maximum likelihood estimator for estimating theta1 when it is suspected that theta1=theta2.  In this paper we combine minimum phi-divergence estimators as well as phi-divergence test statistics in order to define a preliminary phi-divergence test estimators. These new estimators are compared with the classical estimator as well as the pooled estimator.

  11. Preliminary Options Assessment of Versatile Irradiation Test Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Sen, Ramazan Sonat [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2017-01-01

    The objective of this report is to summarize the work undertaken at INL from April 2016 to January 2017 and aimed at analyzing some options for designing and building a versatile test reactor; the scope of work was agreed upon with DOE-NE. Section 2 presents some results related to KNK II and PRISM Mod A. Section 3 presents some alternatives to the VCTR presented in [ ] as well as a neutronic parametric study to assess the minimum power requirement needed for a 235U metal fueled fast test reactor capable to generate a fast (>100 keV) flux of 4.0 x 1015 n /cm2-s at the test location. Section 4 presents some results regarding a fundamental characteristic of test reactors, namely displacement per atom (dpa) in test samples. Section 5 presents the INL assessment of the ANL fast test reactor design FASTER. Section 6 presents a summary.

  12. ADDITIVE TESTING FOR IMPROVED SULFUR RETENTION: PRELIMINARY REPORT

    Energy Technology Data Exchange (ETDEWEB)

    Amoroso, J.; Fox, K.

    2011-09-07

    The Savannah River National Laboratory is collaborating with Alfred University to evaluate the potential for additives in borosilicate glass to improve sulfur retention. This preliminary report provides further background on the incorporation of sulfur in glass and outlines the experiments that are being performed by the collaborators. A simulated waste glass composition has been selected for the experimental studies. The first phase of experimental work will evaluate the impacts of BaO, PbO, and V{sub 2}O{sub 5} at concentrations of 1.0, 2.0, and 5.0 wt % on sulfate retention in simulated high level waste borosilicate glass. The second phase of experimental work will evaluate the effects of time at the melt temperature on sulfur retention. The resulting samples will be characterized to determine the amount of sulfur remaining as well as to identify the formation of any crystalline phases. The results will be used to guide the future selection of frits and glass forming chemicals in vitrifying Department of Energy wastes containing high sulfur concentrations.

  13. Radiation Testing on State-of-the-Art CMOS: Challenges, Plans, and Preliminary Results

    Science.gov (United States)

    LaBel, Kenneth A.; Cohn, Lewis M.

    2009-01-01

    At GOMAC 2007 and 2008, we discussed a variety of challenges for radiation testing of modern semiconductor devices and technologies [1, 2]. In this presentation, we provide more specific details in this on-going investigation focusing on out-of-the-box lessons observed for providing radiation effects assurances as well as preliminary test results.

  14. Interteaching and the Testing Effect: A Preliminary Analysis

    Science.gov (United States)

    Lambert, Tonya; Saville, Bryan K.

    2012-01-01

    In a number of studies, interteaching has produced better student-learning outcomes than traditional teaching methods. Little research, however, has examined ways to make interteaching more effective. Research on the testing effect suggests that frequent testing may improve performance. Thus, including postdiscussion quizzes as a part of…

  15. Preliminary test of effects of cognitive ability, experience, and teaching methods on Verbal Analogy Test scores.

    Science.gov (United States)

    Rosenberg, D; Willson-Quayle, A; Pasnak, R

    2000-06-01

    The methods from which one can choose when preparing for the GRE Verbal Analogies include books, software, audiotapes, and formal classroom instruction. What teaching method will work best for a given individual? To begin the search for an answer, Gray's test of reasoning ability was given to 28 undergraduates who also answered a questionnaire detailing their experience with analogies. They were randomly assigned to teaching conditions ranging from self-directed workbook study to intensive interactive assistance. No teaching method was superior overall, but interactions showed that (1) students who scored worst on the pretest improved the most, (2) those higher in cognitive functioning and experience performed better after intensive interactive assistance, and (3) those lower in both cognitive functioning and experience did significantly better with self-paced workbooks. This preliminary work suggests that it may be profitable to assess the prior experience and reasoning of potential students and adopt the methods for teaching formal operational thought found empirically to be most suitable.

  16. Preliminary low temperature tests of a digital signal processor

    Science.gov (United States)

    Zebulum, Ricardo S.; Ramesham, Rajeshuni; Stoica, Adrian; Keymeulen, Didier; Daud, Taher; Sekanina, Lukas

    2005-01-01

    This paper describes an initial experiment performed to assess the electrical behavior of the Innovative Integration board containing a Digital Signal Processor (DSP) with its JTAG (Blackhawk) connector at low temperatures. The objective of the experiment is to determine the lowest temperature at which the DSP can operate. The DSP was tested at various low-temperatures and a Genetic Algorithm was used as the DSP test program.

  17. CHALLENGE TESTS WITH LISTERIA MONOCYTOGENES IN SALAMI: PRELIMINARY RESULTS

    Directory of Open Access Journals (Sweden)

    R. Mioni

    2013-02-01

    Full Text Available Challenge tests are the preferable methodology to study the behaviour of Listeria monocytogenes on ready to eat foods, according to Regulation (EC 2073/2005. Challenge testing using L. monocytogenes in seasoned salami from different food business operators showed, after seasoning of the product, a count reduction of the inoculated organisms without any further growth of the pathogen; however differences of L. monocytogenes behaviour could be observed according to different production protocols.

  18. Putting Google Scholar to the Test: A Preliminary Study

    Science.gov (United States)

    Robinson, Mary L.; Wusteman, Judith

    2007-01-01

    Purpose: To describe a small-scale quantitative evaluation of the scholarly information search engine, Google Scholar. Design/methodology/approach: Google Scholar's ability to retrieve scholarly information was compared to that of three popular search engines: Ask.com, Google and Yahoo! Test queries were presented to all four search engines and…

  19. On Designing Construct Driven Situational Judgment Tests: Some Preliminary Recommendations

    Science.gov (United States)

    Guenole, Nigel; Chernyshenko, Oleksandr S.; Weekly, Jeff

    2017-01-01

    Situational judgment tests (SJTs) are widely agreed to be a measurement technique. It is also widely agreed that SJTs are a questionable methodological choice for measurement of psychological constructs, such as behavioral competencies, due to a lack of evidence supporting appropriate factor structures and high internal consistencies.…

  20. Modeling and Testing of EVs - Preliminary Study and Laboratory Development

    DEFF Research Database (Denmark)

    Yang, Guang-Ya; Marra, Francesco; Nielsen, Arne Hejde;

    2010-01-01

    Electric vehicles (EVs) are expected to play a key role in the future energy management system to stabilize both supply and consumption with the presence of high penetration of renewable generation. A reasonably accurate model of battery is a key element for the study of EVs behavior and the grid...... tests, followed by the suggestions towards a feasible battery model for further studies....

  1. Preliminary tests of a damaged ship for CFD validation

    Directory of Open Access Journals (Sweden)

    Sungkyun Lee

    2012-06-01

    Full Text Available One of the most critical issues in naval architecture these days is the operational safety. Among many factors to be considered for higher safety level requirements, the hull stability in intact and damaged conditions is the first to ensure for both commercial and military vessels. Unlike the intact stability cases, the assessment of the damaged ship stability is very complicated physical phenomena. Therefore it is widely acknowledged that computational fluid dynamics (CFD methods are one of most feasible approaches. In order to develop better CFD methods for damaged ship stability assessment, it is essential to perform well-designed model tests and to build a database for CFD validation. In the present study, free roll decay tests in calm water with both intact and damaged ships were performed and six degree-of-freedom (6DOF motion responses of intact ship in regular waves were measured. Through the free roll decay tests, the effects of the flooding water on the roll decay motion of a ship were investigated. Through the model tests in regular waves, the database that provides 6DOF motion responses of intact ship was established.

  2. Study and Preliminary Analysis of Test of Aerosol Migration Mechanism

    Institute of Scientific and Technical Information of China (English)

    CHEN; Lin-lin; SUN; Xue-ting; WEI; Yan-song

    2015-01-01

    TAMM(test of aerosol migration mechanism)is one of the important aspects of Studies on Migration Mechanism of the Source Term under Severe Accident,which is a significant research of the National Large Advanced PWR Research Program.The main task researches the

  3. Preliminary Results of Breakwater Round-Head Tests

    DEFF Research Database (Denmark)

    Burcharth, H. F.; Liu, Z.

    1995-01-01

    The rational design diagram for Dolos armour should incorporate both the hydraulic stability and the structural integrity. The previous tests performed by Aalborg University (AU) made available such design diagram for the trunk of Dolos breakwater without superstructures (Burcharth et al. 1992...

  4. In vitro tests to evaluate immunotoxicity: A preliminary study.

    NARCIS (Netherlands)

    Carfi', M; Gennari, A; Malerba, I; Corsini, E; Pallardy, M; Pieters, R; Loveren, Henk van; Vohr, H W; Hartung, T; Gribaldo, L

    2007-01-01

    The implementation of Registration, Evaluation and Authorisation of new and existing Chemicals (REACH) will increase the number of laboratory animals used, if alternative methods will not be available. In the meantime, REACH promotes the use of in vitro tests and, therefore, a set of appropriated al

  5. Semantic Verbal Fluency test in dementia: Preliminary retrospective analysis

    Directory of Open Access Journals (Sweden)

    Marcos Lopes

    Full Text Available Abstract The Semantic Verbal Fluency (SVF test entails the generation of words from a given category within a pre-set time of 60 seconds. Objectives: To verify whether socio-demographic and clinical data of individuals with dementia correlate with the performance on the SVF test and to ascertain whether differences among the criteria of number of answers, clusters and data spread over the intervals, predict clinical results. Methods: This was a retrospective study of 49 charts of demented patients classified according to the Clinical Dementia Rating (CDR scale. We correlated education, age and gender, as well as CDR and Mini-Mental State Exam (MMSE scores with the number of answers, clustering and switching distributed over four 15-second intervals on the SVF test. Results: The correlation between number of answers and quartiles was weak (r=0.407, p=0.004; r=0.484, p<0.001 but correlation between the number of clusters and responses was strong (r=0.883, p<0.001. The number of items on the SVF was statistically significant with MMSE score (p=0.01 and there was a tendency for significance on the CDR (p=0.06. The results indicated little activity regarding what we propose to call cluster recalling in the two groups. Discussion: The SVF test, using number of items generated, was found to be more effective than classic screening tests in terms of speed and ease of application in patients with CDR 2 and 3.

  6. Preliminary Results of Testing of Flow Effects on Evaporator Scaling

    Energy Technology Data Exchange (ETDEWEB)

    Hu, M.Z.

    2002-02-15

    This investigation has focused on the effects of fluid flow on solids deposition from solutions that simulate the feed to the 2H evaporator at the Savannah River Site. Literature studies indicate that the fluid flow (or shear) affects particle-particle and particle-surface interactions and thus the phenomena of particle aggregation in solution and particle deposition (i.e., scale formation) onto solid surfaces. Experimental tests were conducted with two configurations: (1) using a rheometer to provide controlled shear conditions and (2) using controlled flow of reactive solution through samples of stainless steel tubing. All tests were conducted at 80 C and at high silicon and aluminum concentrations, 0.133 M each, in solutions containing 4 M sodium hydroxide and 1 A4 each of sodium nitrate and sodium nitrite. Two findings from these experiments are important for consideration in developing approaches for reducing or eliminating evaporator scaling problems: (1) The rheometer tests suggested that for the conditions studied, maximum solids deposition occurs at a moderate shear rate, approximately 12 s{sup -1}. That value is expected to be on the order of shear rates that will occur in various parts of the evaporator system; for instance, a 6 gal/min single-phase liquid flow through the 2-in. lift or gravity drain lines would result in a shear rate of approximately 16 s{sup -1}. These results imply that engineering approaches aimed at reducing deposits through increased mixing would need to generate shear near all surfaces significantly greater than 12 s{sup -1}. However, further testing is needed to set a target value for shear that is applicable to evaporator operation. This is because the measured trend is not statistically significant at the 95% confidence interval due to variability in the results. In addition, testing at higher temperatures and lower concentrations of aluminum and silicon would more accurately represent conditions in the evaporator. Without

  7. Flight Test 4 Preliminary Results: NASA Ames SSI

    Science.gov (United States)

    Isaacson, Doug; Gong, Chester; Reardon, Scott; Santiago, Confesor

    2016-01-01

    Realization of the expected proliferation of Unmanned Aircraft System (UAS) operations in the National Airspace System (NAS) depends on the development and validation of performance standards for UAS Detect and Avoid (DAA) Systems. The RTCA Special Committee 228 is charged with leading the development of draft Minimum Operational Performance Standards (MOPS) for UAS DAA Systems. NASA, as a participating member of RTCA SC-228 is committed to supporting the development and validation of draft requirements as well as the safety substantiation and end-to-end assessment of DAA system performance. The Unmanned Aircraft System (UAS) Integration into the National Airspace System (NAS) Project conducted flight test program, referred to as Flight Test 4, at Armstrong Flight Research Center from April -June 2016. Part of the test flights were dedicated to the NASA Ames-developed Detect and Avoid (DAA) System referred to as JADEM (Java Architecture for DAA Extensibility and Modeling). The encounter scenarios, which involved NASA's Ikhana UAS and a manned intruder aircraft, were designed to collect data on DAA system performance in real-world conditions and uncertainties with four different surveillance sensor systems. Flight test 4 has four objectives: (1) validate DAA requirements in stressing cases that drive MOPS requirements, including: high-speed cooperative intruder, low-speed non-cooperative intruder, high vertical closure rate encounter, and Mode CS-only intruder (i.e. without ADS-B), (2) validate TCASDAA alerting and guidance interoperability concept in the presence of realistic sensor, tracking and navigational errors and in multiple-intruder encounters against both cooperative and non-cooperative intruders, (3) validate Well Clear Recovery guidance in the presence of realistic sensor, tracking and navigational errors, and (4) validate DAA alerting and guidance requirements in the presence of realistic sensor, tracking and navigational errors. The results will be

  8. Preliminary operational results of the industrial process heat field tests

    Energy Technology Data Exchange (ETDEWEB)

    Kutscher, C.; Davenport, R.

    1980-04-01

    There are currently six DOE-funded solar industrial process heat (IPH) field tests which have been operational for one year or longer. These are all low temperature first generation projects which supply heat at temperatures below 100/sup 0/C - three hot water and three hot air. During the 1979 calendar year, personnel from the Solar Energy Research Institute (SERI) visited all of these sites; the performance and cost results obtained for each project and the operational problems encountered at each site are discussed.

  9. Preliminary results of the round-robin testing of F82H

    Energy Technology Data Exchange (ETDEWEB)

    Shiba, K.; Yamanouchi, N.; Tohyama, A.

    1996-10-01

    Preliminary results of metallurgical, physical and mechanical properties of low activation ferritic steel F82H (IEA heat) were obtained in the round-robin test in Japan. The properties of IEA heat F82H were almost the same as the original F82H.

  10. Preliminary results of a proficiency testing of industrial CT scanners using small polymer items

    DEFF Research Database (Denmark)

    Angel, Jais Andreas Breusch; Cantatore, Angela; De Chiffre, Leonardo

    2012-01-01

    This work presents preliminary results concerning a proficiency testing for intercomparison of industrial CT scanners. Two audit items, similar to common industrial parts, were selected for circulation. The two items were a single polymer complex geometry part and a simple geometry item made of two...

  11. Preliminary Investigation of the 1991 Medical College Admission Test Factor Structure.

    Science.gov (United States)

    Li, Weichang; Mitchell, Karen J.

    A substantially revised Medical College Admission Test (MCAT) was introduced in spring 1991. The new examination is designed to assess critical thinking skills, basic concepts and problem solving facility in science, and writing skills. This paper reports preliminary findings on the factor structure of the revised MCAT, which consists of four…

  12. Sizing and preliminary hardware testing of solar powered UAV

    Directory of Open Access Journals (Sweden)

    S. Jashnani

    2013-12-01

    Full Text Available Integrating solar energy into modern aircraft technology has been a topic of interest and has received a lot of attention from researchers over the last two decades. A few among the many potential applications of this technology are the possibility of continuous self sustained flight for purposes such as information relay, surveillance and monitoring. This paper discusses the altitude and payload mass, as independent parameters, and their influence on the size and design of the aircraft. To estimate available solar power, two different models have been presented; one for low altitudes and the other for high altitudes. An engineering ground model was built to simulate the power and propulsion system over 24 h of continuous operation. The paper presents data from tests performed till date and lessons learnt while dealing with the construction of the engineering ground model as well as changes that can be made to improve the design.

  13. Preliminary Scaling Estimate for Select Small Scale Mixing Demonstration Tests

    Energy Technology Data Exchange (ETDEWEB)

    Wells, Beric E.; Fort, James A.; Gauglitz, Phillip A.; Rector, David R.; Schonewill, Philip P.

    2013-09-12

    The Hanford Site double-shell tank (DST) system provides the staging location for waste that will be transferred to the Hanford Tank Waste Treatment and Immobilization Plant (WTP). Specific WTP acceptance criteria for waste feed delivery describe the physical and chemical characteristics of the waste that must be met before the waste is transferred from the DSTs to the WTP. One of the more challenging requirements relates to the sampling and characterization of the undissolved solids (UDS) in a waste feed DST because the waste contains solid particles that settle and their concentration and relative proportion can change during the transfer of the waste in individual batches. A key uncertainty in the waste feed delivery system is the potential variation in UDS transferred in individual batches in comparison to an initial sample used for evaluating the acceptance criteria. To address this uncertainty, a number of small-scale mixing tests have been conducted as part of Washington River Protection Solutions’ Small Scale Mixing Demonstration (SSMD) project to determine the performance of the DST mixing and sampling systems.

  14. Preliminary Failure Modes and Effects Analysis of the US DCLL Test Blanket Module

    Energy Technology Data Exchange (ETDEWEB)

    Lee C. Cadwallader

    2007-08-01

    This report presents the results of a preliminary failure modes and effects analysis (FMEA) of a small tritium-breeding test blanket module design for the International Thermonuclear Experimental Reactor. The FMEA was quantified with “generic” component failure rate data, and the failure events are binned into postulated initiating event families and frequency categories for safety assessment. An appendix to this report contains repair time data to support an occupational radiation exposure assessment for test blanket module maintenance.

  15. Preliminary Failure Modes and Effects Analysis of the US DCLL Test Blanket Module

    Energy Technology Data Exchange (ETDEWEB)

    Lee C. Cadwallader

    2010-06-01

    This report presents the results of a preliminary failure modes and effects analysis (FMEA) of a small tritium-breeding test blanket module design for the International Thermonuclear Experimental Reactor. The FMEA was quantified with “generic” component failure rate data, and the failure events are binned into postulated initiating event families and frequency categories for safety assessment. An appendix to this report contains repair time data to support an occupational radiation exposure assessment for test blanket module maintenance.

  16. [Information Concerning Mean Test Scores for the Graduate Management Admission Test (GMAT), Graduate Record Examinations (GRE), Law School Admission Test (LSAT), Preliminary Scholastic Aptitude Test (PSAT), and Scholastic Aptitude Test (SAT) for the National Commission on Excellence in Education.

    Science.gov (United States)

    Solomon, Robert J.

    Data are provided to the National Commission on Excellence in Education on the Graduate Management Admission Test (GMAT), Graduate Record Examinations (GRE), Law School Admission Test (LSAT), Preliminary Scholastic Aptitude Test (PSAT), and Scholastic Aptitude Test (SAT). Statistics are provided on the following: yearly GMAT mean scores 1965-1966…

  17. Preliminary report: in-plant safety/relief valve discharge load test, Monticello Plant

    Energy Technology Data Exchange (ETDEWEB)

    Chang, H.C. (comp.)

    1976-12-01

    This preliminary report covers the results of the test program of safety/relief valve (SRV) discharge load phenomena and the effects upon the Mark I primary containment torus structure of the Monticello Nuclear Power Plant. The objectives of the test were to provide a data base for verifying/improving analytical models and to measure the structural response of the torus to SRV discharges. Objectives, instrumentation, and test plan are described. Results of continuing data evaluation will be included in the final report scheduled for publication later in 1977.

  18. Preliminary environmental analysis of a geopressured-geothermal test well in Brazoria County, Texas

    Energy Technology Data Exchange (ETDEWEB)

    White, W.A.; McGraw, M.; Gustavson, T.C.; Meriwether, J.

    1977-11-16

    Preliminary environmental data, including current land use, substrate lithology, soils, natural hazards, water resources, biological assemblages, meteorological data, and regulatory considerations have been collected and analyzed for approximately 150 km/sup 2/ of land near Chocolate Bayou, Brazoria County, Texas, in which a geopressured-geothermal test well is to be drilled in the fall of 1977. The study was designed to establish an environmental data base and to determine, within spatial constraints set by subsurface reservoir conditions, environmentally suitable sites for the proposed well. Preliminary analyses of data revealed the eed for focusing on the following areas: potential for subsidence and fault activation, susceptibility of test well and support facilities to fresh- and salt-water flooding, possible effects of produced saline waters on biological assemblages and groundwaer resources, distribution of expansive soils, and effect of drilling and associated support activities on known archeological-cultural resources.

  19. Test for Nonlinear Input Output Relations in SISO Systems by Preliminary Data Analysis

    DEFF Research Database (Denmark)

    Knudsen, Torben

    2000-01-01

    This paper discusses and develops preliminary statistical tests for detecting nonlinearities in the deterministic part of SISO systems with noise. The most referenced method is unreliable for common noise processes as e.g.\\ colored. Therefore two new methods based on superposition and sinus input...... are developed. They are much more robust, especially the sinus method which is reliable also for colored, heavy tailed or skew distributed noise....

  20. Children’s Foreign Language Anxiety Scale: Preliminary Tests of Reliability and Validity

    OpenAIRE

    Aydın, Selami; Harputlu, Leyla; Güzel, Serhat; Uştuk, Özgehan; Savran Çelik, Şeyda; Genç, Deniz

    2016-01-01

    Foreign language anxiety (FLA), which constitutes a serious problem in the foreign language learning process, has been mainly seen as a research issue regarding adult language learners, while it has been overlooked in children. This is because there is a lack of appropriate tools to measure FLA among children, whereas there are many studies on the scales that aim to measure anxiety levels among adult learners. Thus, the current study aims to conduct the preliminary tests of reliability and va...

  1. Beam Dynamics for the Preliminary Phase of the New CLIC Test Facility (CTF3)

    CERN Document Server

    Corsini, R; Rinolfi, Louis; Risselada, Thys; Royer, P; Tecker, F A

    2001-01-01

    In the framework of the CLIC (Compact Linear Collider) RF power source studies, the scheme of electron pulse compression and bunch frequency mulitiplication, using injection by RF deflectors into an isochronous ring, will be tested, at low charge, during the preliminary phase of the new CLIC Test Facility (CTF3) at CERN. In this paper, we describe the beam dynamics studies made in order to assess the feasibility of the bunch combination experiment, as well as the related beam measurements performed on the LEP Pre-Injector complex (LPI) before its transformation into CTF3

  2. Blade system design studies volume II : preliminary blade designs and recommended test matrix.

    Energy Technology Data Exchange (ETDEWEB)

    Griffin, Dayton A. (Global Energy Concepts, LLC, Kirkland, WA)

    2004-06-01

    As part of the U.S. Department of Energy's Wind Partnerships for Advanced Component Technologies (WindPACT) program, Global Energy Concepts, LLC is performing a Blade System Design Study (BSDS) concerning innovations in materials, processes and structural configurations for application to wind turbine blades in the multi-megawatt range. The BSDS Volume I project report addresses issues and constraints identified to scaling conventional blade designs to the megawatt size range, and evaluated candidate materials, manufacturing and design innovations for overcoming and improving large blade economics. The current report (Volume II), presents additional discussion of materials and manufacturing issues for large blades, including a summary of current trends in commercial blade manufacturing. Specifications are then developed to guide the preliminary design of MW-scale blades. Using preliminary design calculations for a 3.0 MW blade, parametric analyses are performed to quantify the potential benefits in stiffness and decreased gravity loading by replacement of a baseline fiberglass spar with carbon-fiberglass hybrid material. Complete preliminary designs are then presented for 3.0 MW and 5.0 MW blades that incorporate fiberglass-to-carbon transitions at mid-span. Based on analysis of these designs, technical issues are identified and discussed. Finally, recommendations are made for composites testing under Part I1 of the BSDS, and the initial planned test matrix for that program is presented.

  3. Characteristics, finite element analysis, test description, and preliminary test results of the STM4-120 kinematic Stirling engine

    Science.gov (United States)

    Linker, K. L.; Rawlinson, K. S.; Smith, G.

    1991-10-01

    The Department of Energy's Solar Thermal Program has, as one of its program elements, the development and evaluation of conversion device technologies applicable to dish-electric systems. The primary research and development combines a conversion device (heat engine), solar receiver, and generator mounted at the focus of a parabolic dish concentrator. The Stirling-cycle heat engine was identified as the conversion device for dish-electric with the most potential for meeting the program's goals for efficiency, reliability, and installed cost. To advance the technology toward commercialization, Sandia National Laboratories has acquired a Stirling Thermal Motors, Inc. kinematic Stirling engine, STM4-120, for evaluation. The engine is being bench-tested at Sandia's Engine Test Facility and will be combined later with a solar receiver for on-sun evaluation. This report presents the engine characteristics, finite element analyses of critical engine components, test system layout, instrumentation, and preliminary performance results from the bench test.

  4. Preliminary Test of Friction disk type turbine for S-CO{sub 2} cycle application

    Energy Technology Data Exchange (ETDEWEB)

    Baik, Seungjoon; Kim, Hyeon Tae; Lee, Jeong Ik [KAIST, Daejeon (Korea, Republic of)

    2016-05-15

    Due to the relatively mild sodium-CO{sub 2} interaction, the S-CO{sub 2} Brayton cycle can reduce the accident consequence compared to the steam Rankine cycle. Also the S-CO{sub 2} power conversion cycle can achieve high efficiency for SFR core thermal condition. Moreover, the S-CO{sub 2} power cycle can reduce the total cycle footprint due to high density of the working fluid. However, the high pressure operating condition and low viscosity of the fluid cause difficulties in designing appropriate seals and multi-stage turbo machineries. To solve the problem for designing turbo machineries in a creative way, KAIST research team tested a friction disk type turbine concept for the S-CO{sub 2} cycle application. In this paper, the investigation of the Tesla turbine and preliminary test results with compressed air are covered. The KAIST research team investigated a friction disk type turbine, named as Tesla turbine, for the S-CO{sub 2} power cycle applications. Due to the robust design of the fiction disk type, the Tesla turbine technology can be utilized not only for S-CO{sub 2} turbo machinery but also for the multi-phase or sludge flow turbo machinery. The preliminary test of lab-scale Tesla turbine with compressed air was conducted. The high pressure vessel was manufactured for the S-CO{sub 2} operating condition. The test will be concentrated on the turbine efficiency measurement under various conditions and development of the design methodology.

  5. Preliminary Design of Large Scale Sodium Thermal-Hydraulic Test Facility

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Tae Ho; Kim, Tae Joon; Eoh, Jae Hyuk; Lee, Hyeong Yeon; Lee, Jae Han; Jeong, Ji Young; Park, Su Ki; Han, Ji Woong; Yoo, Yong Hwan; Lee, Yong Bum [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2009-10-15

    A large scale sodium thermal-hydraulic test facility is being designed for verification of the advanced design concept of the passive decay heat removal circuit (PDRC) in a medium- or large-sized pool-type SFR. In the test, its cooling capability during the long- and short-term periods after the reactor trip will be evaluated, and also the produced experimental data will be utilized for the assessment and verification of the safety and performance analysis codes. Starting with the preliminary design of the test facility this year using KALIMER-600 as a reference reactor, the basic and the detailed designs will be made through 2011-2012 based on the demonstration reactor which is intended to be constructed by 2028 according to a long-term national SFR development plan. The installation is scheduled to be completed by the end of 2013, and the main experiments will commence from 2015 after the startup test in 2014. This paper briefly introduces the preliminary design features which were produced as a first step to assess the appropriateness of the facility design methodology.

  6. A Preliminary Analysis of Reactor Performance Test (LOEP) for a Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyeonil; Park, Su-Ki [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    The final phase of commissioning is reactor performance test, which is to prove the integrated performance and safety of the research reactor at full power with fuel loaded such as neutron power calibration, Control Absorber Rod/Second Shutdown Rod drop time, InC function test, Criticality, Rod worth, Core heat removal with natural mechanism, and so forth. The last test will be safety-related one to assure the result of the safety analysis of the research reactor is marginal enough to be sure about the nuclear safety by showing the reactor satisfies the acceptance criteria of the safety functions such as for reactivity control, maintenance of auxiliaries, reactor pool water inventory control, core heat removal, and confinement isolation. After all, the fuel integrity will be ensured by verifying there is no meaningful change in the radiation levels. To confirm the performance of safety equipment, loss of normal electric power (LOEP), possibly categorized as Anticipated Operational Occurrence (AOO), is selected as a key experiment to figure out how safe the research reactor is before turning over the research reactor to the owner. This paper presents a preliminary analysis of the reactor performance test (LOEP) for a research reactor. The results showed how different the transient between conservative estimate and best estimate will look. Preliminary analyses have shown all probable thermal-hydraulic transient behavior of importance as to opening of flap valve, minimum critical heat flux ratio, the change of flow direction, and important values of thermal-hydraulic parameters.

  7. Preliminary test of the prototype modular cryostat for a 10 MW offshore superconducting wind turbine

    Science.gov (United States)

    Sun, Jiuce; Ramalingam, R.; Sanz, Santiago; Neumann, Holger

    2017-02-01

    The SUPerconducting Reliable lightweight And more POWERful offshore wind turbine (SUPRAPOWER), an EU FP7 funded research project, are under development for an innovative superconducting 10 MW class offshore wind turbine. Due to the requirements of handling, maintenance, reliability of long term and offshore operation, the cryostats are divided in two major parts: the modular cryostat able to accommodate a single coil and a thermal collector that links all the modules. The prototype modular cryostat was designed, manufactured and assembled in Karlsruhe Institute of Technology (KIT). The paper reports preliminary test results of proto-type modular cryostat with a two-stage Gifford-McMahon (GM) cryocooler.

  8. Nonlinear Analysis and Preliminary Testing Results of a Hybrid Wing Body Center Section Test Article

    Science.gov (United States)

    Przekop, Adam; Jegley, Dawn C.; Rouse, Marshall; Lovejoy, Andrew E.; Wu, Hsi-Yung T.

    2015-01-01

    A large test article was recently designed, analyzed, fabricated, and successfully tested up to the representative design ultimate loads to demonstrate that stiffened composite panels with through-the-thickness reinforcement are a viable option for the next generation large transport category aircraft, including non-conventional configurations such as the hybrid wing body. This paper focuses on finite element analysis and test data correlation of the hybrid wing body center section test article under mechanical, pressure and combined load conditions. Good agreement between predictive nonlinear finite element analysis and test data is found. Results indicate that a geometrically nonlinear analysis is needed to accurately capture the behavior of the non-circular pressurized and highly-stressed structure when the design approach permits local buckling.

  9. Potential of preliminary test methods to predict biodegradation performance of petroleum hydrocarbons in soil.

    Science.gov (United States)

    Aichberger, H; Hasinger, Marion; Braun, Rudolf; Loibner, Andreas P

    2005-03-01

    Preliminary tests at different scales such as degradation experiments (laboratory) in shaking flasks, soil columns and lysimeters as well as in situ respiration tests (field) were performed with soil from two hydrocarbon contaminated sites. Tests have been evaluated in terms of their potential to provide information on feasibility, degradation rates and residual concentration of bioremediation in the vadose zone. Sample size, costs and duration increased with experimental scale in the order shaking flasks - soil columns - lysimeter - in situ respiration tests, only time demand of respiration tests was relatively low. First-order rate constants observed in degradation experiments exhibited significant differences between both, different experimental sizes and different soils. Rates were in line with type and history of contamination at the sites, but somewhat overestimated field rates particularly in small scale experiments. All laboratory experiments allowed an estimation of residual concentrations after remediation. In situ respiration tests were found to be an appropriate pre-testing and monitoring tool for bioventing although residual concentrations cannot be predicted from in situ respiration tests. Moreover, this method does not account for potential limitations that might hamper biodegradation in the longer term but only reflects the actual degradation potential when the test is performed.

  10. Turkish children's Bender-Gestalt Test performance: a pilot study and preliminary norms.

    Science.gov (United States)

    Ozer, Serap

    2007-12-01

    The present study was undertaken to provide preliminary data for norms on the Bender-Gestalt Test for 253 children ages 5 yr., 5 mo. to 11 yr., 10 mo. in Turkey. The Koppitz Developmental Scoring System gave mean error scores of 4.2 (SD = 3.3) for girls and 3.6 (SD = 3.0) for boys. The mean error scores obtained by all age groups are presented and compared with other cross-cultural data. These scores decreased across age groups, supporting Bender's maturational hypothesis of the test. The present sample performed at a higher developmental level than the Koppitz normative sample for the 5- and 6-year age groups, while means for other age groups were similar to the original U.S. norms. That this pattern is supported in other cross-cultural studies is discussed as well as the importance of developing local norms for visual spatial tests.

  11. Preliminary optical design of an Active Optics test bench for space applications.

    Science.gov (United States)

    Calcines, A.; Bitenc, U.; Rolt, S.; Reeves, S.; Doelman, N.; Human, J.; Morris, T.; Myers, R.; Talbot, G.

    2017-03-01

    This communication presents a preliminary optical design for a test bench conceived within the European Space Agency's TRP project (Active Optics Correction Chain (AOCC) for large monolithic mirrors) with the goal of designing and developing an Active Optics system able to correct in space on telescopes apertures larger than 3 meters. The test bench design uses two deformable mirrors of 37.5 mm and 116 mm, the smallest mirror to generate aberrations and the largest one to correct them. The system is configured as a multi-functional test bench capable of verifying the performance of a Shack-Hartmann wavefront sensor as well as of a Phase Diversity based wavefront sensor. A third optical path leads to a high-order Shack-Hartmann wavefront sensor to monitor the entire system performance.

  12. The NASA Juncture Flow Experiment: Goals, Progress, and Preliminary Testing (Invited)

    Science.gov (United States)

    Rumsey, Christopher L.; Neuhart, Danny H.; Kegerise, Michael A.

    2016-01-01

    NASA has been working toward designing and conducting a juncture flow experiment on a wing-body aircraft configuration. The experiment is planned to provide validation-quality data for CFD that focuses on the onset and progression of a separation bubble near the wing-body juncture trailing edge region. This paper describes the goals and purpose of the experiment. Although currently considered unreliable, preliminary CFD analyses of several different configurations are shown. These configurations have been subsequently tested in a series of "risk-reduction" wind tunnel tests, in order to help down-select to a final configuration that will attain the desired flow behavior. The risk-reduction testing at the higher Reynolds number has not yet been completed (at the time of this writing), but some results from one of the low-Reynolds-number experiments are shown.

  13. Preliminary Design Report of Fluid System of PDRC Performance Test Facility

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Tae-Ho; Eoh, Jae-Hyuk; Seong, Seung-Hwan; Han, Ji-Woong; Choi, Byoung-Hae; Kim, Seong-O

    2008-10-15

    PDRC (Passive Decay Heat Removal Circuit) is a safety grade passive residual heat removal system of KALIMER-600. In order to assess the long- and short-term cooling capabilities of PDRC and produce the experimental data for the verification of the performance and safety analysis codes, PDRC performance test was planned for. In this study, the overall design requirements and the preliminary design data for the fluid system of test facility are presented. The fluid system of the facility is composed of the primary heat transport system, the PDRC, the IHX air cooling system and the sodium supply/purification system. The preliminarily designed facility is scaled-down to 1/4 for length, 1/400 for volume from the primary heat transport system and the PDRC of KALIMER-600 based on a reliable scaling method. It can simulate the cooling of primary heat transport system for the full temperature condition in case of the reactor and pump trips. The produced preliminary design data will be used in the future as the basic information for a detailed design, an establishment of experimental requirement and an assessment of the appropriateness of facility design.

  14. The Cleveland Sorting Test: a preliminary study of an alternate form of the Wisconsin Card-Sorting Test.

    Science.gov (United States)

    Poreh, Amir; Pastel, Dan; Miller, Ashley; Levin, Jennifer

    2012-01-01

    During the past two decades, studies have repeatedly shown that the Wisconsin Card-Sorting Test (WCST) is not as sensitive to prefrontal-lobe functioning as was originally suspected. Specifically, both clinical and brain-imaging studies have shown that several distinct neural circuits contribute to one's ability to successfully complete different aspects of the test. Another limitation of the WCST is its length, which makes it difficult and frustrating for certain clinical populations. To address the above limitations, researchers have proposed the development of new indexes and the integration of an adaptive testing approach that will allow for the premature termination of the test. Unfortunately, given the proprietary nature of the WCST, none of the above recommendations have been adopted. The present preliminary study examined an alternate form of the 64-Item WCST (WCST-64), the Cleveland Sorting Test (CST-64). The normative data of the two measures as well as the total number of errors, perseverative responses, perseverative errors, and categories completed were compared using a repeated-measures design. Overall, the study supports psychometric approximation of the CST-64 and the WCST-64. Suggestions for future studies and modifications of the CST-64, including the use of recently proposed indexes and adaptive administration approaches, are provided.

  15. In vitro preliminary cytotoxicity testing of vegetal extracts, using colorimetric methods

    Directory of Open Access Journals (Sweden)

    Claudia Patricia Cordero Camacho

    2011-12-01

    Full Text Available To advance in the study of the Colombian vegetal biodiversity, considered as a potential source of pharmacologically active products, the establishment of biological activity evaluation systems is necessary, which allow the detection of active products against pathologies with high social and economical impact, such as cancer. This work describes the implementation of a preliminary in vitro methodology for the determination of potential anticancer activity in vegetal extracts, by cytotoxicity testing upon human tumor cell lines, measuring the cellular mass indirectly with the colorimetric assays of MTT (methyl tetrazolium tiazole reduction and SRB (sulforhodamine Bstaining. HT-29, MCF-7, SiHa and HEp-2 cell lines cultures were adapted, MTT concentration, cellular density and treatment period parameters for the cytotoxicity assay were selected. Cell lines sensitivity to the chemotherapeutic agent Doxorubicin HCl was determined. Colombian vegetal species extracts cytotoxicity was tested and usefulness of the assay as a tool to bioguide the search of active products was evidenced.

  16. Extended testing of a general contextual classifier using the massively parallel processor - Preliminary results and test plans. [for thematic mapping

    Science.gov (United States)

    Tilton, J. C.

    1985-01-01

    Earlier encouraging test results of a contextual classifier that combines spatial and spectral information employing a general statistical approach are expanded. The earlier results were of limited meaning because they were produced from small (50-by-50 pixel) data sets. An implementation of the contextual classifier on NASA Goddard's Massively Parallel Processor (MPP) is presented; for the first time the MPP makes feasible the testing of the classifier on large data sets (a 12-hour test on a VAX-11/780 minicomputer now takes 5 minutes on the MPP). The MPP is a Single-Instruction, Multiple Data Stream computer, consisting of 16,384 bit serial microprocessors connected in a 128-by-128 mesh array with each element having data transfer connections with its four nearest neighbors so that the MPP is capable of billions of operations per second. Preliminary results are given (with more expected for the conference) and plans are mentioned for extended testing of the contextual classifier on Thematic Mapper data sets.

  17. Preliminary study of an immunochromatography test for serological diagnosis of canine brucellosis.

    Science.gov (United States)

    Wanke, M M; Cairó, F; Rossano, M; Laiño, M; Baldi, P C; Monachesi, N E; Comercio, E A; Vivot, M M

    2012-12-01

    The most widely used screening test for the diagnosis of brucellosis in the dog is the rapid slide agglutination test in the presence of 2-mercaptoethanol (2ME-RSAT). The diagnosis is partially confirmed by the agar gel immunodiffusion test (AGID) and definitively confirmed by bacteriological isolation. Some chronic cases not detected by these tests may be detected by ELISA tests. The use of 2ME-RSAT in routine clinical practice requires a microscope and an experienced operator. An immunochromatographic diagnostic test for canine brucellosis (FASTest(®) Brucella c., Megacor, Hörbranz, Austria) has been recently released. In this study, we compared the diagnostic performance of the FASTest with those of 2ME-RSAT, AGID and ELISAs. Sera from 17 healthy dogs used as negative controls yielded negative results by FASTest, indicating a 100% specificity in this sample. Among 27 sera of dogs with acute or subacute brucellosis confirmed by B. canis isolation, all of which were positive by RSAT and ELISAs, the FASTest was positive in 24 cases and AGID in 23. In acute and subacute cases, the sensitivity of FASTest was 89%. Sera from six dogs with bacteriologically confirmed chronic brucellosis, which were positive by ELISAs but negative by 2ME-RSAT, were also tested; 1 was positive by FASTest and 4 were positive by AGID. These preliminary results indicate a good specificity of the FASTest (100% in this sample) but an unacceptable sensitivity as a screening test. In cases with chronic brucellosis, the sensitivity of the FASTest was lower than that of ELISAs but this assay could make a good intermediate test to be run after a positive RSAT and before running an AGID.

  18. Validating a dance-specific screening test for balance: preliminary results from multisite testing.

    Science.gov (United States)

    Batson, Glenna

    2010-09-01

    Few dance-specific screening tools adequately capture balance. The aim of this study was to administer and modify the Star Excursion Balance Test (oSEBT) to examine its utility as a balance screen for dancers. The oSEBT involves standing on one leg while lightly targeting with the opposite foot to the farthest distance along eight spokes of a star-shaped grid. This task simulates dance in the spatial pattern and movement quality of the gesturing limb. The oSEBT was validated for distance on athletes with history of ankle sprain. Thirty-three dancers (age 20.1 +/- 1.4 yrs) participated from two contemporary dance conservatories (UK and US), with or without a history of lower extremity injury. Dancers were verbally instructed (without physical demonstration) to execute the oSEBT and four modifications (mSEBT): timed (speed), timed with cognitive interference (answering questions aloud), and sensory disadvantaging (foam mat). Stepping strategies were tracked and performance strategies video-recorded. Unlike the oSEBT results, distances reached were not significant statistically (p = 0.05) or descriptively (i.e., shorter) for either group. Performance styles varied widely, despite sample homogeneity and instructions to control for strategy. Descriptive analysis of mSEBT showed an increased number of near-falls and decreased timing on the injured limb. Dancers appeared to employ variable strategies to keep balance during this test. Quantitative analysis is warranted to define balance strategies for further validation of SEBT modifications to determine its utility as a balance screening tool.

  19. Preliminary study fo the interference of proteic compounds of radiopharmaceuticals in the test of lisadode amebocitos de limulus (LAL)

    CERN Document Server

    Aldana, C

    1997-01-01

    In this thesis the objective was evaluate the interference of proteic compounds of the radiopharmaceuticals in the test LAL (lisado of amebocitos de limulus) for this, macroagregates of albumina (MAA) was used with metilendifosfonato (MDP) as control that is the radiopharmaceutical more used in the nuclear medicine centers of the country. Initially preliminary test were carried out to assess if some of two radiopharmaceuticals would cause interference with LAL test, after the test was validated and finally routine tests were made. With the preliminary assays was concluded that proteic compounds did not cause interference (albumina with a concentration of 2 md/dl) with the MAA. However with the MDP cause interference with LAL test. The interference was eliminated with a dilution of 1:8 of the sample. Was concluded that the success of LAL test depends on conditions such as temperature, pH, constant incubation (no minimum variations) and that is a good test for quality control of the radiopharmaceuticals.

  20. Preliminary piping layout and integration of European test blanket modules subsystems in ITER CVCS area

    Energy Technology Data Exchange (ETDEWEB)

    Tarallo, Andrea, E-mail: andrea.tarallo@unina.it [CREATE, University of Naples Federico II, DII, P.le Tecchio, 80, 80125 Naples (Italy); Mozzillo, Rocco; Di Gironimo, Giuseppe [CREATE, University of Naples Federico II, DII, P.le Tecchio, 80, 80125 Naples (Italy); Aiello, Antonio; Utili, Marco [ENEA UTIS, C.R. Brasimone, Bacino del Brasimone, I-40032 Camugnano, BO (Italy); Ricapito, Italo [TBM& MD Project, Fusion for Energy, EU Commission, Carrer J. Pla, 2, Building B3, 08019 Barcelona (Spain)

    2015-04-15

    Highlights: • The use of human modeling tools for piping design in view of maintenance is discussed. • A possible preliminary layout for TBM subsystems in CVCS area has been designed with CATIA. • A DHM-based method to quickly check for maintainability of piping systems is suggested. - Abstract: This paper explores a possible integration of some ancillary systems of helium-cooled lithium lead (HCLL) and helium-cooled pebble-bed (HCPB) test blanket modules in ITER CVCS area. Computer-aided design and ergonomics simulation tools have been fundamental not only to define suitable routes for pipes, but also to quickly check for maintainability of equipment and in-line components. In particular, accessibility of equipment and systems has been investigated from the very first stages of the design using digital human models. In some cases, the digital simulations have resulted in changes in the initial space reservations.

  1. Preliminary safety evaluation (PSE) for Sodium Storage Facility at the Fast Flux Test Facility

    Energy Technology Data Exchange (ETDEWEB)

    Bowman, B.R.

    1994-09-30

    This evaluation was performed for the Sodium Storage Facility (SSF) which will be constructed at the Fast Flux Test Facility (FFTF) in the area adjacent to the South and West Dump Heat Exchanger (DHX) pits. The purpose of the facility is to allow unloading the sodium from the FFTF plant tanks and piping. The significant conclusion of this Preliminary Safety Evaluation (PSE) is that the only Safety Class 2 components are the four sodium storage tanks and their foundations. The building, because of its imminent risk to the tanks under an earthquake or high winds, will be Safety Class 3/2, which means the building has a Safety Class 3 function with the Safety Class 2 loads of seismic and wind factored into the design.

  2. The preliminary tests of the superconducting electron cyclotron resonance ion source DECRIS-SC2.

    Science.gov (United States)

    Efremov, A; Bekhterev, V; Bogomolov, S; Drobin, V; Loginov, V; Lebedev, A; Yazvitsky, N; Yakovlev, B

    2012-02-01

    A new compact version of the "liquid He-free" superconducting ECR ion source, to be used as an injector of highly charged heavy ions for the MC-400 cyclotron, is designed and built at the Flerov Laboratory of Nuclear Reactions in collaboration with the Laboratory of High Energy Physics of JINR. The axial magnetic field of the source is created by the superconducting magnet and the NdFeB hexapole is used for the radial plasma confinement. The microwave frequency of 14 GHz is used for ECR plasma heating. During the first tests, the source shows a good enough performance for the production of medium charge state ions. In this paper, we will present the design parameters and the preliminary results with gaseous ions.

  3. Test plan for preliminary study of inorganic contaminant removal from RMA groundwater

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, D.; Terkonda, P.; Weeks, N.

    1978-02-01

    This document consists of a major report on inorganic contaminant removal from ground water. In this plan, WES has been requested by the OPM-CDIR to conduct a literature review and preliminary laboratory treatability studies on various source waters at RMA. Recommendation is that the determination of suitable treatment processes be based on both engineering and economic analysis and that the processes be compatible with the organic contaminant treatment processes under study (activated carbon adsorption and ultraviolet/ozone oxidation). The amendment to the test plan presents the inorganic treatment processes found from the literature to be applicable to the inorganic contaminants in RMA ground water and outlines the bench scale study to be conducted at WES using the potential processes. The rest of the document is correspondence and reports on various water treatability.

  4. Developing the Psychological Strain Scales (PSS): Reliability, Validity, and Preliminary Hypothesis Tests.

    Science.gov (United States)

    Zhang, Jie; Lu, Juncheng; Zhao, Sibo; Lamis, Dorian A; Li, Ning; Kong, Yuanyuan; Jia, Cunxian; Zhou, Li; Ma, Zhenyu

    2014-01-01

    Since its inception, the Strain Theory of Suicide has been tested and supported in a number of empirical studies. This social psychological theory can be employed as a complementary conceptualization to account for suicidal behaviors as well as mental disorders. However, the lack of consistent measurements of the strains limits the application of the theory in scientific research. Our research team has developed such scales for future testing of the Strain Theory of Suicide in a more systematic approach. For the initial items to measure the four strains (value, aspiration, deprivation, and coping), we solicited approximately 40 items for each strain with high face validity by about 30 fellow researchers. A preliminary examination of about 160 items for consistency and validity, with a sample of about 300 college students, yielded 20 consistent items for each of the four strain scales. Then, a second study was conducted at a different university with approximately 500 students to further streamline each of the four strain scales and test the validity of each with corresponding established scales and variables. As a result, 15 items were selected for each of the four Psychological Strain Scales (PSS). In correlation and multiple regression analyses, we found support for the hypotheses regarding the positive associations between psychological strains measured by the PSS and psychopathology including suicidal ideation. Follow up research with the new scales needs to be carried out in order to test the effects of psychological strains on suicide and mental disorders for various populations.

  5. Clinical evaluation of children testing positive in screening tests for attention-deficit/hyperactivity disorder: A preliminary report

    Directory of Open Access Journals (Sweden)

    Maria Skounti

    2009-06-01

    Full Text Available Background and Objectives: Screening tests are of great diagnostic value in attention-deficit/hyperactivity disorder (ADHD, however final diagnosis relies on a clinical examination by an expert. The objective of the present study was to clinically evaluate children who had been screened positive for ADHD through both a parent and a teacher questionnaire. Methods: Parent interview and child behavior checklist and clinical assessment were used to confirm the preliminary diagnosis in 42 children aged 8 years, who have been screened positive for ADHD out of 1,708 children, in a large, two-setting screening study conducted in Crete, Greece. Results: The diagnosis of ADHD was confirmed for 31 children (74%. In the remaining 11 children, ADHD manifestations were attributed to other primary disorders. None of the 42 children was classified as lacking symptoms suggesting ADHD. Among the 31 children with confirmed ADHD, only 2 had been diagnosed prior to the screening test. Conclusions: Although clinical evaluation is the golden standard for diagnosis of ADHD, two-setting screening questionnaires by parent and teacher are useful tools in identifying children who need further investigation and intervention.

  6. Cross-cultural effects on IQ test performance: a review and preliminary normative indications on WAIS-III test performance.

    Science.gov (United States)

    Shuttleworth-Edwards, Ann B; Kemp, Ryan D; Rust, Annegret L; Muirhead, Joanne G L; Hartman, Nigel P; Radloff, Sarah E

    2004-10-01

    This article presents a review of cross-cultural influences on Wechsler IQ tests, together with a preliminary investigation into WAIS-III test performance (English administration) for a southern African sample (age range 19-30) stratified for white English first language and black African first language, level and quality of education. ('African language' is the term used to denote the indigenous languages of black populations in southern Africa). A two-way ANOVA revealed highly significant effects for both level and quality of education within the black African first language group. Scores for the white English and black African first language groups with advantaged education were comparable with the US standardization, whereas scores for black African first language participants with disadvantaged education were significantly lower than this. Thus indications from this research are that normative studies should take account of the influential variable of quality of education, in addition to level of education. Alternatively faulty conclusions may be drawn about the effects of ethnicity, with the potential for neuropsychological misdiagnosis.

  7. Preliminary Tests Concerning Zero-Valent Iron Efficiency in Inorganic Pollutants Remediation

    Directory of Open Access Journals (Sweden)

    Silvia Fiore

    2009-01-01

    Full Text Available Problem statement: This study was aimed to a preliminary evaluation of the applicability of granular Zero-Valent Iron (ZVI to the on site remediation of groundwater polluted by inorganic contaminants by means of a Permeable Reactive Barrier (PRB. A particular interest was devoted to groundwater impacted by Acid Mine Drainage (AMD that was caused by the oxidation of metal sulphide minerals contained in mine wastes, especially iron disulphide pyrite. Although AMD consequences were particularly evident in surface waters, the percolation through mine wastes may heavily alter the groundwater quality, therefore is particularly important the development of a restrained cost remediation technique for groundwater polluted by AMDs. Approach: In this study the degradation efficiency of Brown size 8/50 ZVI (Peerless Powders and Abrasive Inc., Detroit, US was evaluated performing a leaching column test and analyzing the Oxidation Reduction Potential (ORP, metals, nitrates, chlorides and sulphates profiles along the column. Results: This test allowed simulating the solid-liquid contact characteristic of a real PRB behavior that proved to be a possible solution for the remediation of inorganic pollutants in groundwater. Conclusion: The considered material showed efficiency above 99% in metals removal, although further tests, involving biotic processes and more reducing conditions, are necessary to improve the degradation of sulphates and nitrates.

  8. AGR-1 Irradiated Test Train Preliminary Inspection and Disassembly First Look

    Energy Technology Data Exchange (ETDEWEB)

    Paul Demkowicz; Lance Cole; Scott Ploger; Philip Winston; Binh Pham; Michael Abbott

    2011-01-01

    The AGR-1 irradiation experiment ended on November 6, 2009, after 620 effective full power days in the Advanced Test Reactor, achieving a peak burnup of 19.6% FIMA. The test train was shipped to the Materials and Fuels Complex in March 2010 for post-irradiation examination. The first PIE activities included non-destructive examination of the test train, followed by disassembly of the test train and individual capsules and detailed inspection of the capsule contents, including the fuel compacts and the graphite fuel holders. Dimensional measurements of the compacts, graphite holders, and steel capsules shells were performed using a custom vision measurement system (for outer diameters and lengths) and conventional bore gauges (for inner diameters). Gamma spectrometry of the intact test train gave a preliminary look at the condition of the interior components. No evidence of damage to compacts or graphite components was evident from the isotopic and gross gamma scans. Neutron radiography of the intact Capsule 2 showed a high degree of detail of interior components and confirmed the observation that there was no major damage to the capsule. Disassembly of the capsules was initiated using procedures qualified during out-of-cell mockup testing. Difficulties were encountered during capsule disassembly due to irradiation-induced changes in some of the capsule components’ properties, including embrittled niobium and molybdenum parts that were susceptible to fracture and swelling of the graphite fuel holders that affected their removal from the capsule shells. This required various improvised modifications to the disassembly procedure to avoid damage to the fuel compacts. Ultimately the capsule disassembly was successful and only one compact from Capsule 4 (out of 72 total in the test train) sustained damage during the disassembly process, along with the associated graphite holder. The compacts were generally in very good condition upon removal. Only relatively minor

  9. Preliminary test of an imaging probe for nuclear medicine using hybrid pixel detectors

    CERN Document Server

    Bertolucci, Ennio; Mettivier, G; Montesi, M C; Russo, P

    2002-01-01

    We are investigating the feasibility of an intraoperative imaging probe for lymphoscintigraphy with Tc-99m tracer, for sentinel node radioguided surgery, using the Medipix series of hybrid detectors coupled to a collimator. These detectors are pixelated semiconductor detectors bump-bonded to the Medipix1 photon counting read-out chip (64x64 pixel, 170 mu m pitch) or to the Medipix2 chip (256x256 pixel, 55 mu m pitch), developed by the European Medipix collaboration. The pixel detector we plan to use in the final version of the probe is a semi-insulating GaAs detector or a 1-2 mm thick CdZnTe detector. For the preliminary tests presented here, we used 300-mu m thick silicon detectors, hybridized via bump-bonding to the Medipix1 chip. We used a tungsten parallel-hole collimator (7 mm thick, matrix array of 64x64 100 mu m circular holes with 170 mu m pitch), and a 22, 60 and 122 keV point-like (1 mm diameter) radioactive sources, placed at various distances from the detector. These tests were conducted in order ...

  10. Design and preliminary test of precision segment positioning actuator for the California Extremely Large Telescope

    Science.gov (United States)

    Lorell, Kenneth R.; Aubrun, Jean-Noel; Clappier, Robert R.; Shelef, Ben; Shelef, Gad

    2003-01-01

    In order for the California Extremely Large Telescope (CELT) to achieve the required optical performance, each of its 1000 primary mirror segments must be positioned relative to adjacent segments with nanometer-level accuracy. This can be accomplished using three actuators for each segment to actively control the segment in tip, tilt, and piston. The Keck telescopes utilize a segmented primary mirror similar to CELT employing a highly successful actuator design. However, because of its size and the shear number of actuators (3000 vs. 108 for Keck), CELT will require a different design. Sensitivity to wind loads and structural vibrations, the large dynamic range, low operating power, and extremely reliable operation, all achieved at an affordable unit cost, are the most demanding design requirements. This paper examines four actuator concepts and presents a trade-off between them. The concept that best met the CELT requirements is described along with an analysis of its performance. The concept is based on techniques that achieve the required accuracy while providing a substantial amount of vibration attenuation and damping. A prototype actuator has been built to validate this concept. Preliminary tests confirm predicted behavior and future tests will establish a sound baseline for final design and production.

  11. Preliminary failure modes and effects analysis on Korean HCCR TBS to be tested in ITER

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Mu-Young, E-mail: myahn74@nfri.re.kr [National Fusion Research Institute, Daejeon (Korea, Republic of); Cho, Seungyon [National Fusion Research Institute, Daejeon (Korea, Republic of); Jin, Hyung Gon; Lee, Dong Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Park, Yi-Hyun; Lee, Youngmin [National Fusion Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    Highlights: • Postulated initiating events are identified through failure modes and effects analysis on the current HCCR TBS design. • A set of postulated initiating events are selected for consideration of deterministic analysis. • Accident evolutions on the selected postualted initiating events are qualitatively described for deterministic analysis. - Abstract: Korean Helium cooled ceramic reflector (HCCR) Test blanket system (TBS), which comprises Test blanket module (TBM) and ancillary systems in various locations of ITER building, is operated at high temperature and pressure with decay heat. Therefore, safety is utmost concern in design process and it is required to demonstrate that the HCCR TBS is designed to comply with the safety requirements and guidelines of ITER. Due to complexity of the system with many interfaces with ITER, a systematic approach is necessary for safety analysis. This paper presents preliminary failure modes and effects analysis (FMEA) study performed for the HCCR TBS. FMEA is a systematic methodology in which failure modes for components in the system and their consequences are studied from the bottom-up. Over eighty failure modes have been investigated on the HCCR TBS. The failure modes that have similar consequences are grouped as postulated initiating events (PIEs) and total seven reference accident scenarios are derived from FMEA study for deterministic accident analysis. Failure modes not covered here due to evolving design of the HCCR TBS and uncertainty in maintenance procedures will be studied further in near future.

  12. New rapid test for prenatal detection of trisomy 21 (Down's syndrome): preliminary report.

    Science.gov (United States)

    Bryndorf, T.; Christensen, B.; Philip, J.; Hansen, W.; Yokobata, K.; Bui, N.; Gaiser, C.

    1992-01-01

    OBJECTIVE--To devise and evaluate a rapid screening method for detecting trisomy 21 (Down's syndrome) in samples of uncultured amniotic fluid cells. DESIGN--Non-radioactive in situ hybridisation with HY128, a 500,000 base pair yeast artificial chromosome probe specific for chromosome 21. Blinded study of 12 karyotypically normal amniotic fluid samples and eight samples trisomic for chromosome 21. SETTING--Cytogenetic and obstetric services at a tertiary referral centre, Copenhagen. MAIN OUTCOME MEASURES--Time necessary to complete the test. Proportion of cell nuclei containing two and three hybridisation signals in karyotypically normal and abnormal amniotic fluid samples. RESULTS--The test could be completed within three to four days after amniocentesis. In the normal samples a mean of 73% (range 61-82%) of the amniotic cell nuclei showed two hybridisation signals and 6% (0-18%) showed three signals. By contrast, among the trisomic samples 29% (19-38%) of the nuclei exhibited two signals and 48% (31-60%) showed three signals. CONCLUSION--The technique clearly distinguished between normal and trisomic samples. Prenatal diagnosis with in situ hybridisation with chromosome specific probes was fast and may make it possible to screen for selected, aneuploidies. However, the technique is still at a preliminary stage and needs further evaluation and refinement. Images p1537-a PMID:1385745

  13. Individual differences in left parietal white matter predict math scores on the Preliminary Scholastic Aptitude Test.

    Science.gov (United States)

    Matejko, Anna A; Price, Gavin R; Mazzocco, Michèle M M; Ansari, Daniel

    2013-02-01

    Mathematical skills are of critical importance, both academically and in everyday life. Neuroimaging research has primarily focused on the relationship between mathematical skills and functional brain activity. Comparatively few studies have examined which white matter regions support mathematical abilities. The current study uses diffusion tensor imaging (DTI) to test whether individual differences in white matter predict performance on the math subtest of the Preliminary Scholastic Aptitude Test (PSAT). Grades 10 and 11 PSAT scores were obtained from 30 young adults (ages 17-18) with wide-ranging math achievement levels. Tract based spatial statistics was used to examine the correlation between PSAT math scores, fractional anisotropy (FA), radial diffusivity (RD) and axial diffusivity (AD). FA in left parietal white matter was positively correlated with math PSAT scores (specifically in the left superior longitudinal fasciculus, left superior corona radiata, and left corticospinal tract) after controlling for chronological age and same grade PSAT critical reading scores. Furthermore, RD, but not AD, was correlated with PSAT math scores in these white matter microstructures. The negative correlation with RD further suggests that participants with higher PSAT math scores have greater white matter integrity in this region. Individual differences in FA and RD may reflect variability in experience dependent plasticity over the course of learning and development. These results are the first to demonstrate that individual differences in white matter are associated with mathematical abilities on a nationally administered scholastic aptitude measure.

  14. Using a situational judgement test for selection into dental core training: a preliminary analysis.

    Science.gov (United States)

    Rowett, E; Patterson, F; Cousans, F; Elley, K

    2017-05-12

    Objective and setting This paper describes the evaluation of a pilot situational judgement test (SJT) for selection into UK Dental Core Training (DCT). The SJT's psychometric properties, group differences based on gender and ethnicity, and candidate reactions were assessed.Methods The SJT targets four non-academic attributes important for success in DCT. Data were collected alongside live selection processes from five Health Education England local teams in the UK (N = 386). Candidates completed the pilot SJT and an evaluation questionnaire to examine their reactions to the test.Results SJT scores were relatively normally distributed and showed acceptable levels of internal reliability (α = 0.68). Difficulty level and partial correlations between scenarios and SJT total score were in the expected ranges (64.61% to 90.03% and r = 0.06 to 0.41, respectively). No group differences were found for gender, and group differences between White and BME candidates were minimal. Most candidates perceived the SJT as relevant to the target role, appropriate and fair.Conclusions This study demonstrated the potential suitability of an SJT for use in DCT selection. Future research should replicate these preliminary findings in other cohorts, and assess the predictive validity of the SJT for predicting key training and practice-based outcomes.

  15. A Job-Seeking Self-Efficacy Scale for People with Physical Disabilities: Preliminary Development and Psychometric Testing.

    Science.gov (United States)

    Barlow, Julie; Wright, Chris; Cullen, Lesley

    2002-01-01

    Study sought to develop and conduct preliminary testing of the psychometric properties of a job-seeking self-efficacy (JSS) scale that reflected the experiences of people with physical disabilities. Greater job seeking self-efficacy and perceived ability to manage disability at interview were associated with more positive psychological well-being.…

  16. Speech and Pause Characteristics in Multiple Sclerosis: A Preliminary Study of Speakers with High and Low Neuropsychological Test Performance

    Science.gov (United States)

    Feenaughty, Lynda; Tjaden, Kris; Benedict, Ralph H. B.; Weinstock-Guttman, Bianca

    2013-01-01

    This preliminary study investigated how cognitive-linguistic status in multiple sclerosis (MS) is reflected in two speech tasks (i.e. oral reading, narrative) that differ in cognitive-linguistic demand. Twenty individuals with MS were selected to comprise High and Low performance groups based on clinical tests of executive function and information…

  17. Design and preliminary test of a free-air ionization chamber for low-energy X-ray

    Institute of Scientific and Technical Information of China (English)

    吴金杰; 杨元第; 王培玮; 陈靖; 柳加成

    2011-01-01

    A free-air ionization chamber in low-energy X-ray has been designed and manufactured at the National Institute of Metrology (NIM, China) according to the defination of air-kerma. The results of a preliminary test show that the leakage current of ionizatio

  18. AGR-2 Irradiated Test Train Preliminary Inspection and Disassembly First Look

    Energy Technology Data Exchange (ETDEWEB)

    Ploger, Scott [Idaho National Lab. (INL), Idaho Falls, ID (United States); Demkowciz, Paul [Idaho National Lab. (INL), Idaho Falls, ID (United States); Harp, Jason [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-05-01

    The AGR 2 irradiation experiment began in June 2010 and was completed in October 2013. The test train was shipped to the Materials and Fuels Complex in July 2014 for post-irradiation examination (PIE). The first PIE activities included nondestructive examination of the test train, followed by disassembly of the test train and individual capsules and detailed inspection of the capsule contents, including the fuel compacts and their graphite fuel holders. Dimensional metrology was then performed on the compacts, graphite holders, and steel capsule shells. AGR 2 disassembly and metrology were performed with the same equipment used successfully on AGR 1 test train components. Gamma spectrometry of the intact test train gave a preliminary look at the condition of the interior components. No evidence of damage to compacts or graphite components was evident from the isotopic and gross gamma scans. Disassembly of the AGR 2 test train and its capsules was conducted rapidly and efficiently by employing techniques refined during the AGR 1 disassembly campaign. Only one major difficulty was encountered while separating the test train into capsules when thermocouples (of larger diameter than used in AGR 1) and gas lines jammed inside the through tubes of the upper capsules, which required new tooling for extraction. Disassembly of individual capsules was straightforward with only a few minor complications. On the whole, AGR 2 capsule structural components appeared less embrittled than their AGR 1 counterparts. Compacts from AGR 2 Capsules 2, 3, 5, and 6 were in very good condition upon removal. Only relatively minor damage or markings were visible using high resolution photographic inspection. Compact dimensional measurements indicated radial shrinkage between 0.8 to 1.7%, with the greatest shrinkage observed on Capsule 2 compacts that were irradiated at higher temperature. Length shrinkage ranged from 0.1 to 0.9%, with by far the lowest axial shrinkage on Capsule 3 compacts

  19. Preliminary Analysis of the Transient Reactor Test Facility (TREAT) with PROTEUS

    Energy Technology Data Exchange (ETDEWEB)

    Connaway, H. M. [Argonne National Lab. (ANL), Argonne, IL (United States); Lee, C. H. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-11-30

    The neutron transport code PROTEUS has been used to perform preliminary simulations of the Transient Reactor Test Facility (TREAT). TREAT is an experimental reactor designed for the testing of nuclear fuels and other materials under transient conditions. It operated from 1959 to 1994, when it was placed on non-operational standby. The restart of TREAT to support the U.S. Department of Energy’s resumption of transient testing is currently underway. Both single assembly and assembly-homogenized full core models have been evaluated. Simulations were performed using a historic set of WIMS-ANL-generated cross-sections as well as a new set of Serpent-generated cross-sections. To support this work, further analyses were also performed using additional codes in order to investigate particular aspects of TREAT modeling. DIF3D and the Monte-Carlo codes MCNP and Serpent were utilized in these studies. MCNP and Serpent were used to evaluate the effect of geometry homogenization on the simulation results and to support code-to-code comparisons. New meshes for the PROTEUS simulations were created using the CUBIT toolkit, with additional meshes generated via conversion of selected DIF3D models to support code-to-code verifications. All current analyses have focused on code-to-code verifications, with additional verification and validation studies planned. The analysis of TREAT with PROTEUS-SN is an ongoing project. This report documents the studies that have been performed thus far, and highlights key challenges to address in future work.

  20. Bridging the gap: Research and validation of the DST (Dynamic System Testing) performance test method for CE and ISO standards. Progress and preliminary results

    NARCIS (Netherlands)

    Naron, D.J.; Ree, B.G.C. van der; Rolloos, M.

    1998-01-01

    The Dynamic System Testing (DST) method is one of the methods chosen in the preliminary CEN/TC 312 European quality standards [1 ] to measure the energetic performance of Solar Domestic Hot Water (SDHW) systems. These European standards make a reference to the DST procedure as defined in the Draft I

  1. Hyperacuity test to evaluate vision through dense cataracts: research preliminary to a clinical study in India

    Science.gov (United States)

    Enoch, Jay M.; Giraldez, Maria J.; Huang, Doahua; Hirose, Hiroshi; Knowles, Richard A.; Namperumalsamy, P.; LaBree, Lauri; Azen, Stanley P.

    1995-03-01

    Using high luminance point-of-light stimuli, Vernier judgments can be made in the presence of markedly degraded retinal imagery. Without coaching, observers perform center-of-gravity assessments of relative locations of degraded point images. We seek to defined, presurgery, individuals who will derive the most benefit from advanced cataract removal (a form of triage), and to determine which of two cataractous eyes has the better postsurgical visual prognosis. There are incredible and growing backlogs of patients with severe cataracts (and other dense media opacities) in the developing world, and generally, limited resources are available for provision of health care. Postcataract surgical failure rates for good visual function are often high, and only one eye is operated on in over 95% of indigent patients treated. Prior to initiating advanced studies in the developing world, at Berkeley we conducted preliminary research on Vernier acuity test techniques on normal adult subjects. We sought to determine the number of repeat trials necessary; to compare a two-point and a three-point Vernier display; to determine the shape of the measured response function at large gap separations between test points (required when testing advanced cataract patients); to assess the effect(s) of a broad range of uncorrected refractive errors on outcomes; and to consider means to minimize refraction-based errors. From these and prior data and analyses, we defined a protocol for use in the developing world. Using a newly designed and rugged precision instrument, these tests were repeated on an advanced cataract population at Aravind Eye Hospital in Madurai, India. Although we had much prior experience in India, the initial protocol required major revision on site. Necessary changes in test methods and analytical approaches were made, and next stages in this program were planned. And a new and simple gap `visual acuity' (gap `VA') test was added to the protocol, which greatly facilitated

  2. Preliminary Flight Results of the Microelectronics and Photonics Test Bed: NASA DR1773 Fiber Optic Data Bus Experiment

    Science.gov (United States)

    Jackson, George L.; LaBel, Kenneth A.; Marshall, Cheryl; Barth, Janet; Seidleck, Christina; Marshall, Paul

    1998-01-01

    NASA Goddard Spare Flight Center's (GSFC) Dual Rate 1773 (DR1773) Experiment on the Microelectronic and Photonic Test Bed (MPTB) has provided valuable information on the performance of the AS 1773 fiber optic data bus in the space radiation environment. Correlation of preliminary experiment data to ground based radiation test results show the AS 1773 bus is employable in future spacecraft applications requiring radiation tolerant communication links.

  3. A smartphone-based platform to test the performance of wireless mobile networks and preliminary findings

    Science.gov (United States)

    Geng, Xinli; Xu, Hao; Qin, Xiaowei

    2016-10-01

    During the last several years, the amount of wireless network traffic data increased fast and relative technologies evolved rapidly. In order to improve the performance and Quality of Experience (QoE) of wireless network services, the analysis of field network data and existing delivery mechanisms comes to be a promising research topic. In order to achieve this goal, a smartphone based platform named Monitor and Diagnosis of Mobile Applications (MDMA) was developed to collect field data. Based on this tool, the web browsing service of High Speed Downlink Packet Access (HSDPA) network was tested. The top 200 popular websites in China were selected and loaded on smartphone for thousands times automatically. Communication packets between the smartphone and the cell station were captured for various scenarios (e.g. residential area, urban roads, bus station etc.) in the selected city. A cross-layer database was constructed to support the off-line analysis. Based on the results of client-side experiments and analysis, the usability of proposed portable tool was verified. The preliminary findings and results for existing web browsing service were also presented.

  4. Augmented Reality Cubes for Cognitive Gaming: Preliminary Usability and Game Experience Testing

    Directory of Open Access Journals (Sweden)

    Costas Boletsis

    2016-03-01

    Full Text Available Early detection is important in dementia care; however, cognitive impairment is still under-recognised and under-diagnosed. Cognitive screening and training are two important preventative treatments, which can lead to early detection of cognitive decline. In this work, the “Cognitive Augmented Reality Cubes” (CogARC system is presented, i.e. a serious game for cognitive training and screening, utilising an interaction technique based on Augmented Reality and the manipulation of tangible, physical objects (cubes. The game is a collection of cognitive mini-games of preventative nature and is, primarily, targeting elderly players (≥60 years old. A preliminary testing was conducted focusing on the game experience that CogARC offers (utilising the In-Game Experience Questionnaire, the usability of the system (using the System Usability Scale, and the specific user observations and remarks, as documented by open, semi-structured interviews.  Overall, CogARC demonstrated satisfying positive responses, however, the negative reactions indicated that there are specific problems with aspects of the interaction technique and a number of mini-games. The open interview shed more light on the specific issues of each mini-game and further interpretation of user interactions. The current study managed to provide interesting insights into the game design elements, integration of Augmented Reality, tangible interaction of the system, and on how elderly players perceive and use those interaction components. 

  5. A soft wearable robot for the shoulder: Design, characterization, and preliminary testing.

    Science.gov (United States)

    O'Neill, Ciaran T; Phipps, Nathan S; Cappello, Leonardo; Paganoni, Sabrina; Walsh, Conor J

    2017-07-01

    In this paper, we present a soft wearable robot for the shoulder which has the potential to assist individuals suffering from a range of neuromuscular conditions affecting the shoulder to perform activities of daily living. This wearable robot combines two types of soft textile pneumatic actuators which were custom developed for this particular application to support the upper arm through shoulder abduction and horizontal flexion/extension. The advantage of a textile-based approach is that the robot can be lightweight, low-profile, comfortable and non-restrictive to the wearer, and easy to don like an item of clothing. The actuator's ability to fold flat when not in use allows the robot to be almost invisible under clothing, potentially allowing the user to avoid any stigma associated with using assistive devices in public. To abduct the arm, a textilebased pneumatic actuator was developed to fit within the axilla to push the arm upwards, while a pair of smaller actuators pivot the abduction actuator to allow for horizontal extension and flexion. The individual textile actuators were experimentally evaluated before being integrated into a wearable garment. Human subject testing was performed to evaluate the ability of the robot to assist the arm by monitoring changes in biological muscle activity when comparing the robot powered on and off. Preliminary results show large reductions in muscular effort in targeted muscles, demonstrating the feasibility and promise of such a soft wearable robot for the shoulder.

  6. Soda-Anthraquinone Durian (Durio Zibethinus Murr.) Rind Linerboard and Corrugated Medium Paper: A Preliminary Test

    Science.gov (United States)

    Rizal Masrol, Shaiful; Irwan Ibrahim, Mohd Halim; Adnan, Sharmiza; Mubarak Sa'adon, Amir; Ika Sukarno, Khairil; Fadrol Hisham Yusoff, Mohd

    2017-08-01

    A preliminary test was conducted to investigate the characteristics of linerboard and corrugated medium paper made from durian rind waste. Naturally dried durian rinds were pulped according to Soda-Anthraquinone (Soda-AQ) pulping process with a condition of 20% active alkali, 0.1% AQ, 7:1 liquor to material ratio, 120 minutes cooking time and 170°C cooking temperature. The linerboard and corrugated medium paper with a basis weight of 120 gsm were prepared and evaluated according to Malaysian International Organization for Standardization (MS ISO) and Technical Association of the Pulp and Paper Industry (TAPPI). The results indicate that the characteristics of durian rind linerboard are comparable with other wood or non-wood based paper and current commercial paper. However, low CMT value for corrugated medium and water absorptiveness quality for linerboard could be improved in future. Based on the bulk density (0.672 g/cm3), burst index (3.12 kPa.m2/g) and RCT (2.00 N.m2/g), the durian rind has shown a good potential and suitable as an alternative raw material source for linerboard industry.

  7. Preliminary Tests of Cellular SiC/Iron Alloy Composite Produced by a Pressureless Infiltration Technique

    Directory of Open Access Journals (Sweden)

    Lipowska B.

    2017-03-01

    Full Text Available Preliminary tests aimed at obtaining a cellular SiC/iron alloy composite with a spatial structure of mutually intersecting skeletons, using a porous ceramic preform have been conducted. The possibility of obtaining such a composite joint using a SiC material with an oxynitride bonding and grey cast iron with flake graphite has been confirmed. Porous ceramic preforms were made by pouring the gelling ceramic suspension over a foamed polymer base which was next fired. The obtained samples of materials were subjected to macroscopic and microscopic observations as well as investigations into the chemical composition in microareas. It was found that the minimum width of a channel in the preform, which in the case of pressureless infiltration enables molten cast iron penetration, ranges from 0.10 to 0.17 mm. It was also found that the ceramic material applied was characterized by good metal wettability. The ceramics/metal contact area always has a transition zone (when the channel width is big enough, where mixing of the components of both composite elements takes place.

  8. Patient empowerment in long-term conditions: development and preliminary testing of a new measure.

    Science.gov (United States)

    Small, Nicola; Bower, Peter; Chew-Graham, Carolyn A; Whalley, Diane; Protheroe, Joanne

    2013-07-08

    Patient empowerment is viewed by policy makers and health care practitioners as a mechanism to help patients with long-term conditions better manage their health and achieve better outcomes. However, assessing the role of empowerment is dependent on effective measures of empowerment. Although many measures of empowerment exist, no measure has been developed specifically for patients with long-term conditions in the primary care setting. This study presents preliminary data on the development and validation of such a measure. We conducted two empirical studies. Study one was an interview study to understand empowerment from the perspective of patients living with long-term conditions. Qualitative analysis identified dimensions of empowerment, and the qualitative data were used to generate items relating to these dimensions. Study two was a cross-sectional postal study involving patients with different types of long-term conditions recruited from general practices. The survey was conducted to test and validate our new measure of empowerment. Factor analysis and regression were performed to test scale structure, internal consistency and construct validity. Sixteen predominately elderly patients with different types of long-term conditions described empowerment in terms of 5 dimensions (identity, knowledge and understanding, personal control, personal decision-making, and enabling other patients). One hundred and ninety seven survey responses were received from mainly older white females, with relatively low levels of formal education, with the majority retired from paid work. Almost half of the sample reported cardiovascular, joint or diabetes long-term conditions. Factor analysis identified a three factor solution (positive attitude and sense of control, knowledge and confidence in decision making and enabling others), although the structure lacked clarity. A total empowerment score across all items showed acceptable levels of internal consistency and relationships

  9. Scintigraphic test of gastric emptying and motility: preliminary results in patients with chronic gastritis

    Energy Technology Data Exchange (ETDEWEB)

    Hausmann, T. [Abt. Nuklearmedizin und Spezielle Biophysik, Medizinische Hochschule Hannover (Germany); Mueller-Schauenburg, W. [Abt. Nuklearmedizin, Univ. Tuebingen (Germany); Goeke, M. [Abt. Gastroenterologie und Hepatologie, Medizinische Hochschule Hannover (Germany); Luebeck, M. [Abt. Nuklearmedizin, Univ.-Krankenhaus Eppendorf, Hamburg (Germany); Gratz, K.F. [Abt. Nuklearmedizin und Spezielle Biophysik, Medizinische Hochschule Hannover (Germany); Meier, P. [Abt. Gastroenterologie und Hepatologie, Medizinische Hochschule Hannover (Germany); Manns, M. [Abt. Gastroenterologie und Hepatologie, Medizinische Hochschule Hannover (Germany); Hundeshagen, H. [Abt. Nuklearmedizin und Spezielle Biophysik, Medizinische Hochschule Hannover (Germany)

    1995-11-01

    To record gastric peristalsis using a conventional scintigraphic gastric emptying test the frame rate was increased to 1 frame per 3 s at 10, 30, and 50 min postprandially. The gastric contraction frequency was obtained from the first harmonic of a Fourier transform of a gastric region of interest (ROI) curve. The propagation of gastric contractions was better revealed from computed functional images of the phase and amplitude distribution as compared with the multiple scintigraphic images. The maximal count-rate changes per pixel were calculated as an estimate of the most prominent regional contractile activity of the gastric wall. Among 12 patients with chronic gastritis the group with more severe dyspeptic complaints (n = 6) had significantly higher count-rate changes per pixel when compared with the group with minor complaints (20.0, 21.1 and 14.2 vs 12.9, 12.0, and 10.4 counts/pixel X s at 10, 30, and 50 min. respectively; p < 0.05). The mean half-times of gastric emptying (61, SD 11 vs 54, SD 13 min) and the mean gastric contraction frequencies (2.99, SD 0.19; 3.09, SD 0.33; 3.07, SD 0.10 vs 3.15, SD 0.15; 3.17, SD 0.13; 3.23, SD 0.20 cycles/min at 10, 30, and 50 min, respectively) did not show significant differences between both groups. Our preliminary results agree with the hypothesis of the occurrence of more powerful, nonexpulsive gastric-wall contractions in patients with more severe dyspeptic complaints. Hence, additional quantification of gastric motility allowed a more detailed evaluation of gastric-motor-activity disorders that were for so long not accessible to conventional gastric-emptying tests. (orig.)

  10. Performance characteristics of DRI, CEDIA, and REMEDi systems for preliminary tests of amphetamines and opiates in human urine.

    Science.gov (United States)

    Huang, Min-Kun; Dai, Yu-Shan; Lee, Choung-Huei; Liu, Chiareiy; Tsay, Wen-Ing; Li, Jih-Heng

    2006-01-01

    Arrestee urine specimens (930) were tested with DRI, CEDIA, and REMEDi; those that tested positive for amphetamines and opiates (616 and 414, respectively) were then confirmed by gas chromatography-mass spectrometry. The performance characteristics of these three preliminary systems were evaluated using the following commonly used parameters: true positive, true negative, false positive, and false negative. The sensitivity, specificity, and efficiency of these methods were also calculated. Data derived from this study indicated DRI and CEDIA adapted by this study generated acceptable preliminary test results for amphetamine/methamphetamine and morphine/codeine, but not for MDA/MDMA and REMEDi has lower sensitivity than DRI and CEDIA, but with better specificity and efficiency, supporting its use under emergency room settings where drug concentrations in overdose cases are expectedly at high levels.

  11. Preliminary Results from Second Phase Sea Testing of the Wave Dragon Prototype Wave Energy Converter

    DEFF Research Database (Denmark)

    Soerensen, Hans Chr.; Tedd, James; Friis-Madsen, Erik;

    2006-01-01

    In March 2006 the prototype Wave Dragon has been redeployed to a more energetic site in Nissum Bredning an inland sea in Western Denmark. This has followed a period of renovation of many aspects of the device which have resulted in 20% higher energy output. This paper describes the preliminary re...

  12. Preliminary Results from Second Phase Sea Testing of the Wave Dragon Prototype Wave Energy Converter

    DEFF Research Database (Denmark)

    Soerensen, Hans Chr.; Tedd, James; Friis-Madsen, Erik

    2006-01-01

    In March 2006 the prototype Wave Dragon has been redeployed to a more energetic site in Nissum Bredning an inland sea in Western Denmark. This has followed a period of renovation of many aspects of the device which have resulted in 20% higher energy output. This paper describes the preliminary...

  13. Preliminary studies of tunnel interface response modeling using test data from underground storage facilities.

    Energy Technology Data Exchange (ETDEWEB)

    Sobolik, Steven Ronald; Bartel, Lewis Clark

    2010-11-01

    correctly image the tunnel. This report represents a preliminary step in the development of a methodology to convert numerical predictions of rock properties to an estimation of the extent of rock damage around an underground facility and its corresponding seismic velocity, and the corresponding application to design a testing methodology for tunnel detection.

  14. PRELIMINARY FRIT DEVELOPMENT AND MELT RATE TESTING FOR SLUDGE BATCH 6 (SB6)

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K.; Miller, D.; Edwards, T.

    2009-07-21

    The Liquid Waste Organization (LWO) provided the Savannah River National Laboratory (SRNL) with a Sludge Batch 6 (SB6) composition projection in March 2009. Based on this projection, frit development efforts were undertaken to gain insight into compositional effects on the predicted and measured properties of the glass waste form and to gain insight into frit components that may lead to improved melt rate for SB6-like compositions. A series of Sludge Batch 6 (SB6) based glasses was selected, fabricated and characterized in this study to better understand the ability of frit compositions to accommodate uncertainty in the projected SB6 composition. Acceptable glasses (compositions where the Product Composition Control System (PCCS) Measurement Acceptability Region (MAR) predicted acceptable properties, good chemical durability was measured, and no detrimental nepheline crystallization was observed) can be made using Frit 418 with SB6 over a range of Na{sub 2}O and Al{sub 2}O{sub 3} concentrations. However, the ability to accommodate variation in the sludge composition limits the ability to utilize alternative frits for potential improvements in melt rate. Frit 535, which may offer improvements in melt rate due to its increased B2O3 concentration, produced acceptable glasses with the baseline SB6 composition at waste loadings of 34 and 42%. However, the PCCS MAR results showed that it is not as robust as Frit 418 in accommodating variation in the sludge composition. Preliminary melt rate testing was completed in the Melt Rate Furnace (MRF) with four candidate frits for SB6. These four frits were selected to evaluate the impacts of B{sub 2}O{sub 3} and Na{sub 2}O concentrations in the frit relative to those of Frit 418, although they are not necessarily candidates for SB6 vitrification. Higher concentrations of B{sub 2}O{sub 3} in the frit relative to that of Frit 418 appeared to improve melt rate. However, when a higher concentration of B{sub 2}O{sub 3} was coupled

  15. New lab-made coagulant based on Schinopsis balansae tannin extract: synthesis optimization and preliminary tests on refractory water pollutants

    Science.gov (United States)

    Sánchez-Martín, J.; Beltrán-Heredia, J.; Coco-Rivero, B.

    2014-09-01

    Quebracho colorado tannin extract was used as a coagulant raw material for water and wastewater treatment. The chemical synthesis follows a Mannich reaction mechanism and provides a fully working coagulant that can remove several pollutants from water. This paper addresses the optimization of such synthesis and confirms the feasibility of the coagulant by testing it in a preliminary screening for the elimination of dyes and detergents. The optimum combination of reagents was 6.81 g of diethanolamine (DEA) and 2.78 g of formaldehyde (F) per g of tannin extract. So obtained coagulant was succesfully tested on the removal of 9 dyes and 8 detergents.

  16. The CAST (Childhood Asperger Syndrome Test): preliminary development of a UK screen for mainstream primary-school-age children.

    Science.gov (United States)

    Scott, Fiona J; Baron-Cohen, Simon; Bolton, Patrick; Brayne, Carol

    2002-03-01

    The article describes a pilot and follow-up study of the preliminary development of a new tool to screen for Asperger syndrome (AS) and related social and communication conditions (the Childhood Asperger Syndrome Test, CAST) in children aged 4-11 years, in a non-clinical setting. In the pilot study, parents of 13 children with AS and of 37 typically developing children completed the CAST. There were significant differences between the AS and typical sample means. The pilot was used to establish preliminary cut-off scores for the CAST. In the main study, parents of 1150 primary-school-age children were sent the CAST, and 174 took part in the full data analysis. Results suggest that compared with other tools currently available, the CAST may be useful for identifying children at risk for AS and related conditions, in a mainstream non-clinical sample. Further research is ongoing.

  17. Preliminary Feasibility, Design, and Hazard Analysis of a Boiling Water Test Loop Within the Idaho National Laboratory Advanced Test Reactor National Scientific User Facility

    Energy Technology Data Exchange (ETDEWEB)

    Douglas M. Gerstner

    2009-05-01

    The Advanced Test Reactor (ATR) is a pressurized light-water reactor with a design thermal power of 250 MW. The principal function of the ATR is to provide a high neutron flux for testing reactor fuels and other materials. The ATR and its support facilities are located at the Idaho National Laboratory (INL). A Boiling Water Test Loop (BWTL) is being designed for one of the irradiation test positions within the. The objective of the new loop will be to simulate boiling water reactor (BWR) conditions to support clad corrosion and related reactor material testing. Further it will accommodate power ramping tests of candidate high burn-up fuels and fuel pins/rods for the commercial BWR utilities. The BWTL will be much like the pressurized water loops already in service in 5 of the 9 “flux traps” (region of enhanced neutron flux) in the ATR. The loop coolant will be isolated from the primary coolant system so that the loop’s temperature, pressure, flow rate, and water chemistry can be independently controlled. This paper presents the proposed general design of the in-core and auxiliary BWTL systems; the preliminary results of the neutronics and thermal hydraulics analyses; and the preliminary hazard analysis for safe normal and transient BWTL and ATR operation.

  18. Nuclear maintenance strategy and first steps for preliminary maintenance plan of the EU HCLL & HCPB Test Blanket Systems

    Energy Technology Data Exchange (ETDEWEB)

    Galabert, Jose, E-mail: jose.galabert@f4e.europa.eu [F4E Fusion for Energy, EU Domestic Agency, c/Josep Pla, 2. B3, 08019, Barcelona (Spain); Hopper, Dave [AMEC Foster Wheeler, Faraday Street, Birchwood Park, WA3 6GN (United Kingdom); Neviere, Jean-Cristophe [ITER Organization, Route de Vinon-sur-Verdon, CS 90046, 13067, St. Paul Lez Durance Cedex (France); Nodwell, David [CCFE, Culham Science Centre, Abingdon, OX14 3DB, Oxfordshire (United Kingdom); Pascal, Romain [ITER Organization, Route de Vinon-sur-Verdon, CS 90046, 13067, St. Paul Lez Durance Cedex (France); Poitevin, Yves; Ricapito, Italo [F4E Fusion for Energy, EU Domestic Agency, c/Josep Pla, 2. B3, 08019, Barcelona (Spain); White, Gareth [AMEC Foster Wheeler, Faraday Street, Birchwood Park, WA3 6GN (United Kingdom)

    2017-03-15

    Highlights: • Nuclear maintenance strategy for the two European (EU) Test Blanket Systems (TBS): i/. Helium Cooled Lead Lithium (HCLL) and ii/. Helium Cooled Pebble Bed (HCPB). • Preliminary identification of maintenance tasks for most relevant components of the EU HCLL & HCPB TBS. • Preliminary feasibility analysis for hands-on maintenance tasks of some relevant components of the European Test Blanket Systems. • Design recommendations for enhancement of the European Test Blanket Systems maintainability. - Abstract: This paper gives an overview of nuclear maintenance strategy to be followed for the European HCLL & HCPB Test Blanket Systems (TBS) to be installed in ITER. One of the several core documents to prepare in view of their licensing is their respective ‘Maintenance Plan’. This document is fundamental for ensuring sound performance and safety of the TBS during ITER’s operational phase and shall include, amongst others, relevant information on: maintenance organization, preventive and corrective maintenance task procedures, condition monitoring for key components, maintenance work planning, and a spare parts plan, just to mention some of the key topics. In compliance with the ITER Plant Maintenance policy, first steps have been taken aimed at defining nuclear maintenance strategy for some of the most relevant HCLL & HCPB TBS components, conducted by F4E in collaboration with industry. After a brief recall of maintenance strategy of the TBM Program (PBS-56), this paper analyses main features of EU HCLL & HCPB TBS maintainability and identifies, at their conceptual design phase, a preliminary list of maintenance tasks to be developed for their most representative components. In addition, the paper also presents the first nuclear maintenance studies conducted for replacement of the Q{sub 2} Getter Beds, identifying some design recommendations for their sound maintainability.

  19. Fish-Friendly Hydropower Turbine Development & Deployment: Alden Turbine Preliminary Engineering and Model Testing

    Energy Technology Data Exchange (ETDEWEB)

    Foust, J. [Voith Hydro, Inc., York, PA (USA); Hecker, G. [Alden Research Laboratory, Inc., Holden, MA (USA); Li, S. [Alden Research Laboratory, Inc., Holden, MA (USA); Allen, G. [Alden Research Laboratory, Inc., Holden, MA (USA)

    2011-10-01

    The Alden turbine was developed through the U.S. Department of Energy's (DOE's) former Advanced Hydro Turbine Systems Program (1994-2006) and, more recently, through the Electric Power Research Institute (EPRI) and the DOE's Wind & Water Power Program. The primary goal of the engineering study described here was to provide a commercially competitive turbine design that would yield fish passage survival rates comparable to or better than the survival rates of bypassing or spilling flow. Although the turbine design was performed for site conditions corresponding to 92 ft (28 m) net head and a discharge of 1500 cfs (42.5 cms), the design can be modified for additional sites with differing operating conditions. During the turbine development, design modifications were identified for the spiral case, distributor (stay vanes and wicket gates), runner, and draft tube to improve turbine performance while maintaining features for high fish passage survival. Computational results for pressure change rates and shear within the runner passage were similar in the original and final turbine geometries, while predicted minimum pressures were higher for the final turbine. The final turbine geometry and resulting flow environments are expected to further enhance the fish passage characteristics of the turbine. Computational results for the final design were shown to improve turbine efficiencies by over 6% at the selected operating condition when compared to the original concept. Prior to the release of the hydraulic components for model fabrication, finite element analysis calculations were conducted for the stay vanes, wicket gates, and runner to verify that structural design criteria for stress and deflections were met. A physical model of the turbine was manufactured and tested with data collected for power and efficiency, cavitation limits, runaway speed, axial and radial thrust, pressure pulsations, and wicket gate torque. All parameters were observed to fall

  20. Design and preliminary test of a free-air ionization chamber for low-energy X-ray

    Institute of Scientific and Technical Information of China (English)

    WU Jin-Jie; YANG Yuan-Di; WANG Pei-Wei; CHEN Jing; LIU Jia-Cheng

    2011-01-01

    A free-air ionization chamber in low-energy X-ray has been designed and manufactured at theNational Institute of Metrology (NIM, China) according to the defination of alr-kerma. The results of a preliminary test show that the leakage current of ionization chamber is around 2×10A, and the correction factor of ion recombination for the ionization chamber is also obtained. The free-air ionization chamber is suitable for the primary standard in low-energy X-rays.

  1. Observing the Testing Effect using Coursera Video-Recorded Lectures: A Preliminary Study.

    Science.gov (United States)

    Yong, Paul Zhihao; Lim, Stephen Wee Hun

    2015-01-01

    We investigated the testing effect in Coursera video-based learning. One hundred and twenty-three participants either (a) studied an instructional video-recorded lecture four times, (b) studied the lecture three times and took one recall test, or (c) studied the lecture once and took three tests. They then took a final recall test, either immediately or a week later, through which their learning was assessed. Whereas repeated studying produced better recall performance than did repeated testing when the final test was administered immediately, testing produced better performance when the final test was delayed until a week after. The testing effect was observed using Coursera lectures. Future directions are documented.

  2. Geomechanical properties of Topopah Spring Tuff at the 0.5-m scale: preliminary results of compression tests at elevated temperature

    Energy Technology Data Exchange (ETDEWEB)

    Blair, S. C., LLNL

    1997-08-25

    This report presents preliminary results of laboratory testing of a small block sample of Topopah Spring Tuff. This is the first in a series of tests on small block samples. The purpose of these tests is to investigate the thermal-mechanical, thermal-hydrological, and thermal-chemical response of the rock to conditions similar to the near-field environment (NFE) of a potential nuclear waste repository. This report presents preliminary results of deformation and elastic- wave velocity measurements on a 0.5-m scale block of Topopah Spring tuff tested in uniaxial compression and at temperatures to 85{degrees}C.

  3. Preliminary test results from a free-piston Stirling engine technology demonstration program to support advanced radioisotope space power applications

    Science.gov (United States)

    White, Maurice A.; Qiu, Songgang; Augenblick, Jack E.

    2000-01-01

    Free-piston Stirling engines offer a relatively mature, proven, long-life technology that is well-suited for advanced, high-efficiency radioisotope space power systems. Contracts from DOE and NASA are being conducted by Stirling Technology Company (STC) for the purpose of demonstrating the Stirling technology in a configuration and power level that is representative of an eventual space power system. The long-term objective is to develop a power system with an efficiency exceeding 20% that can function with a high degree of reliability for up to 15 years on deep space missions. The current technology demonstration convertors (TDC's) are completing shakedown testing and have recently demonstrated performance levels that are virtually identical to projections made during the preliminary design phase. This paper describes preliminary test results for power output, efficiency, and vibration levels. These early results demonstrate the ability of the free-piston Stirling technology to exceed objectives by approximately quadrupling the efficiency of conventional radioisotope thermoelectric generators (RTG's). .

  4. Velocity Measurements in Nasal Cavities by Means of Stereoscopic Piv - Preliminary Tests

    Science.gov (United States)

    Cozzi, Fabio; Felisati, Giovanni; Quadrio, Maurizio

    2017-08-01

    The prediction of detailed flow patterns in human nasal cavities using computational fluid dynamics (CFD) can provide essential information on the potential relationship between patient-specific geometrical characteristics of the nasal anatomy and health problems, and ultimately led to improved surgery. The complex flow structure and the intricate geometry of the nasal cavities make achieving such goals a challenge for CFD specialists. The need for experimental data to validate and improve the numerical simulations is particularly crucial. To this aim an experimental set-up based on Stereo PIV and a silicon phantom of nasal cavities have been designed and realized at Politecnico di Milano. This work describes the main features and challenges of the set-up along with some preliminary results.

  5. Preliminary benefit-cost analysis of the Fast Flux Test Facility (FFTF) power addition

    Energy Technology Data Exchange (ETDEWEB)

    Callaway, J.M.; Lezberg, A.J.; Scott, M.J.; Tawil, J.J.

    1984-07-01

    The primary objective of this report is to conduct a preliminary benefit-cost study for the proposed power addition to FFTF to determine whether the project is cost-effective. If the project is authorized, construction will begin in 1986 and end in 1991. Full power operation is scheduled to begin in 1991 and a project life of 20 years is assumed. The undiscounted cost during the construction period of the FFTF power addition is estimated to be approximately $117 million over the construction period (1984 dollars). An additional $3 million is estimated as the opportunity cost - or value of these resources in their most favorable alternative use - of surplus FFTF equipment and unused CRBR equipment, including materials for steam generator fabrication. The annual operating and maintenance cost of the project is estimated to be about $2.1 million in 1984 dollars. 20 references.

  6. Observing the Testing Effect using Coursera Video-recorded Lectures: A Preliminary Study

    Directory of Open Access Journals (Sweden)

    Paul Zhihao eYONG

    2016-01-01

    Full Text Available We investigated the testing effect in Coursera video-based learning. One hundred and twenty-three participants either (a studied an instructional video-recorded lecture four times, (b studied the lecture three times and took one recall test, or (c studied the lecture once and took three tests. They then took a final recall test, either immediately or a week later, through which their learning was assessed. Whereas repeated studying produced better recall performance than did repeated testing when the final test was administered immediately, testing produced better performance when the final test was delayed until a week after. The testing effect was observed using Coursera lectures. Future directions are documented.

  7. Preliminary Computational Study for Future Tests in the NASA Ames 9 foot' x 7 foot Wind Tunnel

    Science.gov (United States)

    Pearl, Jason M.; Carter, Melissa B.; Elmiligui, Alaa A.; WInski, Courtney S.; Nayani, Sudheer N.

    2016-01-01

    The NASA Advanced Air Vehicles Program, Commercial Supersonics Technology Project seeks to advance tools and techniques to make over-land supersonic flight feasible. In this study, preliminary computational results are presented for future tests in the NASA Ames 9 foot x 7 foot supersonic wind tunnel to be conducted in early 2016. Shock-plume interactions and their effect on pressure signature are examined for six model geometries. Near- field pressure signatures are assessed using the CFD code USM3D to model the proposed test geometries in free-air. Additionally, results obtained using the commercial grid generation software Pointwise Reigistered Trademark are compared to results using VGRID, the NASA Langley Research Center in-house mesh generation program.

  8. Preliminary evaluation of a micro-based repeated measures testing system

    Science.gov (United States)

    Kennedy, Robert S.; Wilkes, Robert L.; Lane, Norman E.

    1985-01-01

    A need exists for an automated performance test system to study the effects of various treatments which are of interest to the aerospace medical community, i.e., the effects of drugs and environmental stress. The ethics and pragmatics of such assessment demand that repeated measures in small groups of subjects be the customary research paradigm. Test stability, reliability-efficiency and factor structure take on extreme significance; in a program of study by the U.S. Navy, 80 percent of 150 tests failed to meet minimum metric requirements. The best is being programmed on a portable microprocessor and administered along with tests in their original formats in order to examine their metric properties in the computerized mode. Twenty subjects have been tested over four replications on a 6.0 minute computerized battery (six tests) and which compared with five paper and pencil marker tests. All tests achieved stability within the four test sessions, reliability-efficiencies were high (r greater than .707 for three minutes testing), and the computerized tests were largely comparable to the paper and pencil version from which they were derived. This computerized performance test system is portable, inexpensive and rugged.

  9. Preliminary Research Employing the Watson-Barker Listening Test: A Validation of the Instrument.

    Science.gov (United States)

    Roberts, Charles V.

    A study was conducted to further validate the "Watson-Barker Listening Test." The subjects, 120 students enrolled in basic speech courses, completed the Receiver Apprehension Test (RAT) and the Watson-Barker Listening Test: Form A. Statistical analysis of the results revealed a significant correlation between the RAT scores and both the long term…

  10. Preliminary Multirod Burst Test Program results and implications of interest to reactor safety evaluations

    Energy Technology Data Exchange (ETDEWEB)

    Chapman, R.H. (comp.)

    1978-01-01

    The Multirod Burst Test (MRBT) Program, in progress at Oak Ridge National Laboratory, is investigating LWR cladding deformation in single- and multirod test arrays under conditions representative of reflood and refill phases of a LOCA. In these tests internally pressurized, unirradiated Zircaloy-4 tubes containing electrically heated fuel simulators are tested to failure in a low-pressure, superheated-steam environment. The tubes are ''uniformly'' heated over a 915-mm length; the simulator pressure, due to the small enclosed gas volume, also varies with temperature (and deformation) during the test. Two 4 x 4 multirod tests (B-1 and B-2), one with and one without the shroud being heated, have been conducted with a bundle heating rate of approx. 29/sup 0/C/sec; initial pressure conditions for these tests were selected to cause failure at about 860/sup 0/C. An additional 4 x 4 array (B-3) was tested using a bundle heating rate of approx. 10/sup 0/C/sec; the shroud was also heated in this test. Initial conditions were adjusted to cause failure at approx. 760/sup 0/C. Posttest examination (including flow tests) of the B-1 and B-2 test arrays, is essentially complete, and pertinent data are included in this summary.

  11. Development and Preliminary Testing of a High Precision Long Stroke Slit Change Mechanism for the SPICE Instrument

    Science.gov (United States)

    Paciotti, Gabriel; Humphries, Martin; Rottmeier, Fabrice; Blecha, Luc

    2014-01-01

    In the frame of ESA's Solar Orbiter scientific mission, Almatech has been selected to design, develop and test the Slit Change Mechanism of the SPICE (SPectral Imaging of the Coronal Environment) instrument. In order to guaranty optical cleanliness level while fulfilling stringent positioning accuracies and repeatability requirements for slit positioning in the optical path of the instrument, a linear guiding system based on a double flexible blade arrangement has been selected. The four different slits to be used for the SPICE instrument resulted in a total stroke of 16.5 mm in this linear slit changer arrangement. The combination of long stroke and high precision positioning requirements has been identified as the main design challenge to be validated through breadboard models testing. This paper presents the development of SPICE's Slit Change Mechanism (SCM) and the two-step validation tests successfully performed on breadboard models of its flexible blade support system. The validation test results have demonstrated the full adequacy of the flexible blade guiding system implemented in SPICE's Slit Change Mechanism in a stand-alone configuration. Further breadboard test results, studying the influence of the compliant connection to the SCM linear actuator on an enhanced flexible guiding system design have shown significant enhancements in the positioning accuracy and repeatability of the selected flexible guiding system. Preliminary evaluation of the linear actuator design, including a detailed tolerance analyses, has shown the suitability of this satellite roller screw based mechanism for the actuation of the tested flexible guiding system and compliant connection. The presented development and preliminary testing of the high-precision long-stroke Slit Change Mechanism for the SPICE Instrument are considered fully successful such that future tests considering the full Slit Change Mechanism can be performed, with the gained confidence, directly on a

  12. Preliminary study of novel, timed walking tests for children with spina bifida or cerebral palsy

    Science.gov (United States)

    Kane, Kyra J; Lanovaz, Joel; Bisaro, Derek; Oates, Alison; Musselman, Kristin E

    2016-01-01

    Objective: Walking assessment is an important aspect of rehabilitation practice; yet, clinicians have few psychometrically sound options for evaluating walking in highly ambulatory children. The purpose of this study was to evaluate the validity and reliability of two new measures of walking function—the Obstacles and Curb tests—relative to the 10-Meter Walk test and Timed Up and Go test in children with spina bifida or cerebral palsy. Methods: A total of 16 ambulatory children with spina bifida (n=9) or cerebral palsy (n=7) (9 boys; mean age 7years, 7months; standard deviation 3years, 4months) and 16 age- and gender-matched typically developing children participated. Children completed the walking tests, at both self-selected and fast speeds, twice. To evaluate discriminative validity, scores were compared between typically developing and spina bifida/cerebral palsy groups. Within the spina bifida/cerebral palsy group, inter-test correlations evaluated convergent validity and intraclass correlation coefficients evaluated within-session test–retest reliability. Results: At fast speeds, all tests showed discriminative validity (p<0.006 for typically developing and spina bifida/cerebral palsy comparisons) and convergent validity (rho=0.81–0.90, p⩽0.001, for inter-test correlations). At self-selected speeds, only the Obstacles test discriminated between groups (p=0.001). Moderately strong correlations (rho=0.73–0.78, p⩽0.001) were seen between the 10-Meter Walk test, Curb test, and Timed Up and Go test. Intraclass correlation coefficients ranged from 0.81 to 0.97, with higher test–retest reliability for tests performed at fast speeds rather than self-selected speeds. Conclusion: The Obstacles and Curb tests are promising measures for assessing walking in this population. Performing tests at fast walking speeds may improve their validity and test–retest reliability for children with spina bifida/cerebral palsy. PMID:27493754

  13. Air STAR Beyond Visual Range UAS Description and Preliminary Test Results

    Science.gov (United States)

    Cunningham, Kevin; Cox, David E.; Foster, John V.; Riddick, Stephen E.; Laughter, Sean A.

    2016-01-01

    The NASA Airborne Subscale Transport Aircraft Research Unmanned Aerial System project's capabilities were expanded by updating the system design and concept of operations. The new remotely piloted airplane system design was flight tested to assess integrity and operational readiness of the design to perform flight research. The purpose of the system design is to improve aviation safety by providing a capability to validate, in high-risk conditions, technologies to prevent airplane loss of control. Two principal design requirements were to provide a high degree of reliability and that the new design provide a significant increase in test volume (relative to operations using the previous design). The motivation for increased test volume is to improve test efficiency and allow new test capabilities that were not possible with the previous design and concept of operations. Three successful test flights were conducted from runway 4-22 at NASA Goddard Space Flight Center's Wallops Flight Facility.

  14. Preliminary test results in support of integrated EPP and SMT design methods development

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yanli [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jetter, Robert I. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Sham, T. -L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-02-09

    The proposed integrated Elastic Perfectly-Plastic (EPP) and Simplified Model Test (SMT) methodology consists of incorporating a SMT data-based approach for creep-fatigue damage evaluation into the EPP methodology to avoid using the creep-fatigue interaction diagram (the D diagram) and to minimize over-conservatism while properly accounting for localized defects and stress risers. To support the implementation of the proposed code rules and to verify their applicability, a series of thermomechanical tests have been initiated. One test concept, the Simplified Model Test (SMT), takes into account the stress and strain redistribution in real structures by including representative follow-up characteristics in the test specimen. The second test concept is the two-bar thermal ratcheting tests with cyclic loading at high temperatures using specimens representing key features of potential component designs. This report summaries the previous SMT results on Alloy 617, SS316H and SS304H and presents the recent development on SMT approach on Alloy 617. These SMT specimen data are also representative of component loading conditions and have been used as part of the verification of the proposed integrated EPP and SMT design methods development. The previous two-bar thermal ratcheting test results on Alloy 617 and SS316H are also summarized and the new results from two bar thermal ratcheting tests on SS316H at a lower temperature range are reported.

  15. Evaluation of photopatch test allergens for Indian patients of photodermatitis: Preliminary results

    Directory of Open Access Journals (Sweden)

    Nidhi Jindal

    2011-01-01

    Full Text Available Background: There is a strong need to develop a photopatch test tray suitable for Indian patients of photodermatitis as European/Scandinavian photopatch test trays may not be wholly relevant for them. Aim: We carried out this study using photoallergens relevant in the Indian context to determine their relevance in patients of photodermatitis. Methods: Thirty patients (M:F, 23:7 between 19 and 76 years of age of photodermatitis and 10 controls were patch- and photopatch tested with 20 common photoallergens. In addition, the patients were also (photo patch tested with articles of daily use as and when these were suspected to be the cause. Results: Forty-three positive reactions to one or more antigens were seen in 22 (74% patients. Fourteen positive photopatch tests to seven allergens were observed in 10 (33% patients, and nine (30% of them had a definite relevance. The most common contact allergen was fragrance mix (FM (30%, followed by p-phenylenediamine (20% and Parthenium hysterophorous (17%. The definite relevance of the patch- and photopatch tests could be correlated in 47% of these patients. Conclusions: FM is the most common contact and photocontact allergen among the various photopatch test antigens. Although differences in technique and evaluation make direct comparison between different centers difficult, still photopatch testing remains an integral part and gold standard for the work-up of the photosensitive patients.

  16. A Preliminary Analysis of the Linguistic Complexity of Numeracy Skills Test Items for Pre Service Teachers

    Science.gov (United States)

    O'Keeffe, Lisa

    2016-01-01

    Language is frequently discussed as barrier to mathematics word problems. Hence this paper presents the initial findings of a linguistic analysis of numeracy skills test sample items. The theoretical perspective of multi-modal text analysis underpinned this study, in which data was extracted from the ten sample numeracy test items released by the…

  17. Construction of PREMUX and preliminary experimental results, as preparation for the HCPB breeder unit mock-up testing

    Energy Technology Data Exchange (ETDEWEB)

    Hernández, F., E-mail: francisco.hernandez@kit.edu [Karlsruhe Institute of Technology (KIT), Institute for Neutron Physics and Reactor Technology (INR) (Germany); Kolb, M. [Karlsruhe Institute of Technology (KIT), Institute for Applied Materials (IAM-WPT) (Germany); Annabattula, R. [Indian Institute of Technology Madras (IITM), Department of Mechanical Engineering (India); Weth, A. von der [Karlsruhe Institute of Technology (KIT), Institute for Neutron Physics and Reactor Technology (INR) (Germany)

    2014-10-15

    Highlights: • PREMUX has been constructed as preparation for a future out-of-pile thermo-mechanical qualification of a HCPB breeder unit mock-up. • The rationale and constructive details of PREMUX are reported in this paper. • PREMUX serves as a test rig for the new heater system developed for the HCPB-BU mock-up. • PREMUX will be used as benchmark for the thermal and thermo-mechanical models developed in ANSYS for the pebble beds of the HCPB-BU. • Preliminary results show the functionality of PREMUX and the good agreement of the measured temperatures with the thermal model developed in ANSYS. - Abstract: One of the European blanket designs for ITER is the Helium Cooled Pebble Bed (HCPB) blanket. The core of the HCPB-TBM consists of so-called breeder units (BUs), which encloses beryllium as neutron multiplier and lithium orthosilicate (Li{sub 4}SiO{sub 4}) as tritium breeder in form of pebble beds. After the design phase of the HCPB-BU, a non-nuclear thermal and thermo-mechanical qualification program for this device is running at the Karlsruhe Institute of Technology. Before the complex full scale BU testing, a pre-test mock-up experiment (PREMUX) has been constructed, which consists of a slice of the BU containing the Li{sub 4}SiO{sub 4} pebble bed. PREMUX is going to be operated under highly ITER-relevant conditions and has the following goals: (1) as a testing rig of new heater concept based on a matrix of wire heaters, (2) as benchmark for the existing finite element method (FEM) codes used for the thermo-mechanical assessment of the Li{sub 4}SiO{sub 4} pebble bed, and (3) in situ measurement of thermal conductivity of the Li{sub 4}SiO{sub 4} pebble bed during the tests. This paper describes the construction of PREMUX, its rationale and the experimental campaign planned with the device. Preliminary results testing the algorithm used for the temperature reconstruction of the pebble bed are reported and compared qualitatively with first analyses

  18. Field Test Report: Preliminary Aquifer Test Characterization Results for Well 299-W15-225: Supporting Phase I of the 200-ZP-1 Groundwater Operable Unit Remedial Design

    Energy Technology Data Exchange (ETDEWEB)

    Spane, Frank A.; Newcomer, Darrell R.

    2009-09-23

    This report examines the hydrologic test results for both local vertical profile characterization and large-scale hydrologic tests associated with a new extraction well (well 299-W15-225) that was constructed during FY2009 for inclusion within the future 200-West Area Groundwater Treatment System that is scheduled to go on-line at the end of FY2011. To facilitate the analysis of the large-scale hydrologic test performed at newly constructed extraction well 299-W15-225 (C7017; also referred to as EW-1 in some planning documents), the existing 200-ZP-1 interim pump-and-treat system was completely shut-down ~1 month before the performance of the large-scale hydrologic test. Specifically, this report 1) applies recently developed methods for removing barometric pressure fluctuations from well water-level measurements to enhance the detection of hydrologic test and pump-and-treat system effects at selected monitor wells, 2) analyzes the barometric-corrected well water-level responses for a preliminary determination of large-scale hydraulic properties, and 3) provides an assessment of the vertical distribution of hydraulic conductivity in the vicinity of newly constructed extraction well 299-W15-225. The hydrologic characterization approach presented in this report is expected to have universal application for meeting the characterization needs at other remedial action sites located within unconfined and confined aquifer systems.

  19. Gaseous electron multiplier-based soft x-ray plasma diagnostics development: Preliminary tests at ASDEX Upgrade

    Science.gov (United States)

    Chernyshova, M.; Malinowski, K.; Czarski, T.; Wojeński, A.; Vezinet, D.; Poźniak, K. T.; Kasprowicz, G.; Mazon, D.; Jardin, A.; Herrmann, A.; Kowalska-Strzeciwilk, E.; Krawczyk, R.; Kolasiński, P.; Zabołotny, W.; Zienkiewicz, P.

    2016-11-01

    A Gaseous Electron Multiplier (GEM)-based detector is being developed for soft X-ray diagnostics on tokamaks. Its main goal is to facilitate transport studies of impurities like tungsten. Such studies are very relevant to ITER, where the excessive accumulation of impurities in the plasma core should be avoided. This contribution provides details of the preliminary tests at ASDEX Upgrade (AUG) with a focus on the most important aspects for detector operation in harsh radiation environment. It was shown that both spatially and spectrally resolved data could be collected, in a reasonable agreement with other AUG diagnostics. Contributions to the GEM signal include also hard X-rays, gammas, and neutrons. First simulations of the effect of high-energy photons have helped understanding these contributions.

  20. PHOEBUS/UHTREX: a preliminary study of a low-cost facility for transient tests of LMFBR fuel

    Energy Technology Data Exchange (ETDEWEB)

    Kirk, W.L. (comp.)

    1976-08-01

    The results of a brief preliminary design study of a facility for transient nuclear tests of fast breeder reactor fuel are described. The study is based on the use of a reactor building originally built for the UHTREX reactor, and the use of some reactor hardware and reactor design and fabrication technology remaining from the Phoebus-2 reactor of the Rover nulcear rocket propulsion program. The facility is therefore currently identified as the PHOEBUS/UHTREX facility. This facility is believed capable of providing early information regarding fast reactor core accident energetics issues which will be very valuable to the overall LMFBR safety program. Facility performance in conjunction with a reference 127-fuel pin experiment is described. Low cost and early availability of the facility were emphasized in the selection of design features and parameters.

  1. Design and preliminary test results of the 40 MW power supply at the National High Magnetic Field Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Boenig, H.J. [Los Alamos National Lab., NM (United States); Bogdan, F.; Morris, G.C. [ABB Drives Inc., New Berlin, WI (United States); Ferner, J.A.; Schneider-Muntau, H.J. [National High Magnetic Field Lab., Tallahassee, FL (United States); Rumrill, R.H.; Rumrill, R.S. [Alpha Scientific Electronics Inc., Hayward, CA (United States)

    1993-11-01

    Four highly stabilized, steady-state, 10 MW power supplies have been installed at the National High Magnetic Field Laboratory in Tallahassee, FL. Each supply consists of a 12.5 kV vacuum circuit breaker, two three-winding, step-down transformers, a 24-pulse rectifier with interphase reactors and freewheeling diodes, and a passive and an active filter. Two different transformer tap settings allow dc supply output voltages of 400 and 500 V. The rated current of a supply is 17 kA and each supply has a one hour overload capability of 20 kA. The power supply output bus system, including a reversing switch at the input and 2 {times} 16 disconnect switches at the output, connects each supply to 16 different magnet cells. The design of the power supply is described and preliminary test results with a supply feeding a 10 MW resistive load are presented.

  2. Gaseous electron multiplier-based soft x-ray plasma diagnostics development: Preliminary tests at ASDEX Upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Chernyshova, M., E-mail: maryna.chernyshova@ipplm.pl; Malinowski, K.; Czarski, T.; Kowalska-Strzęciwilk, E. [Institute of Plasma Physics and Laser Microfusion, Hery 23, 01-497 Warsaw (Poland); Wojeński, A.; Poźniak, K. T.; Kasprowicz, G.; Krawczyk, R.; Kolasiński, P.; Zabołotny, W.; Zienkiewicz, P. [Institute of Electronic Systems, Warsaw University of Technology, Nowowiejska 15/19, 00-665 Warsaw (Poland); Vezinet, D.; Herrmann, A. [Max Planck Institute for Plasma Physics, Boltzmannstr. 2, 85748 Garching (Germany); Mazon, D.; Jardin, A. [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France)

    2016-11-15

    A Gaseous Electron Multiplier (GEM)-based detector is being developed for soft X-ray diagnostics on tokamaks. Its main goal is to facilitate transport studies of impurities like tungsten. Such studies are very relevant to ITER, where the excessive accumulation of impurities in the plasma core should be avoided. This contribution provides details of the preliminary tests at ASDEX Upgrade (AUG) with a focus on the most important aspects for detector operation in harsh radiation environment. It was shown that both spatially and spectrally resolved data could be collected, in a reasonable agreement with other AUG diagnostics. Contributions to the GEM signal include also hard X-rays, gammas, and neutrons. First simulations of the effect of high-energy photons have helped understanding these contributions.

  3. Successful micronucleus testing with the EPI/001 3D reconstructed epidermis model: preliminary findings.

    Science.gov (United States)

    Andres, E; Molinari, J; Remoué, N; Sá-Rocha, V M; Barrichello, C; Hurtado, S P

    2012-03-18

    Currently, the cosmetics industry relies on the results of in vitro genotoxicity tests to assess the safety of chemicals. Although the cytokinesis-block micronucleus (CBMN) test for the detection of cells that have divided once is routinely used and currently accepted by regulatory agencies, it has some limitations. Reconstituted human epidermis (RHE) is widely used in safety assessments because its physiological properties resemble those of the skin, and because it allows testing of substances such as hydrophobic compounds. Thus, the micronucleus test is being adapted for application in RHE-reconstructed tissues. Here we investigated whether two different reconstructed epidermis models (EPI/001 from Straticell, and RHE/S/17 from Skinethic) are suitable for application of the micronucleus test. We found that acetone does not modify micronucleus frequency, cell viability, and model structure, compared with non-treated RHE. Treatment of the EPI/001 model with mitomycin C and vinblastine resulted in a dose-dependent increase of micronucleus frequency as well as a decrease of tissue viability and of binucleated cell rate, while no changes of the epidermal structure were observed. The number of binucleated cells obtained with the RHE/S/17 model was too small to permit micronucleus testing. These results indicate that the proliferative rate of the tissue used is a critical parameter in performing the micronucleus test on a 3D model.

  4. Efficient preliminary floating offshore wind turbine design and testing methodologies and application to a concrete spar design.

    Science.gov (United States)

    Matha, Denis; Sandner, Frank; Molins, Climent; Campos, Alexis; Cheng, Po Wen

    2015-02-28

    The current key challenge in the floating offshore wind turbine industry and research is on designing economic floating systems that can compete with fixed-bottom offshore turbines in terms of levelized cost of energy. The preliminary platform design, as well as early experimental design assessments, are critical elements in the overall design process. In this contribution, a brief review of current floating offshore wind turbine platform pre-design and scaled testing methodologies is provided, with a focus on their ability to accommodate the coupled dynamic behaviour of floating offshore wind systems. The exemplary design and testing methodology for a monolithic concrete spar platform as performed within the European KIC AFOSP project is presented. Results from the experimental tests compared to numerical simulations are presented and analysed and show very good agreement for relevant basic dynamic platform properties. Extreme and fatigue loads and cost analysis of the AFOSP system confirm the viability of the presented design process. In summary, the exemplary application of the reduced design and testing methodology for AFOSP confirms that it represents a viable procedure during pre-design of floating offshore wind turbine platforms.

  5. First Total Reflection X-Ray Fluorescence round-robin test of water samples: Preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Borgese, Laura; Bilo, Fabjola [Chemistry for Technologies Laboratory, University of Brescia, Brescia (Italy); Tsuji, Kouichi [Graduate School of Engineering, Osaka City University, Osaka (Japan); Fernández-Ruiz, Ramón [Servicio Interdepartamental de Investigación (SIdI), Laboratorio de TXRF, Universidad Autónoma de Madrid, Madrid (Spain); Margui, Eva [Department of Chemistry, University of Girona, Girona (Spain); Streli, Christina [TU Wien, Atominstitut,Radiation Physics, Vienna (Austria); Pepponi, Giancarlo [Fondazione Bruno Kessler, Povo, Trento (Italy); Stosnach, Hagen [Bruker Nano GmbH, Berlin (Germany); Yamada, Takashi [Rigaku Corporation, Takatsuki, Osaka (Japan); Vandenabeele, Peter [Department of Archaeology, Ghent University, Ghent (Belgium); Maina, David M.; Gatari, Michael [Institute of Nuclear Science and Technology, University of Nairobi, Nairobi (Kenya); Shepherd, Keith D.; Towett, Erick K. [World Agroforestry Centre (ICRAF), Nairobi (Kenya); Bennun, Leonardo [Laboratorio de Física Aplicada, Departamento de Física, Universidad de Concepción (Chile); Custo, Graciela; Vasquez, Cristina [Gerencia Química, Laboratorio B025, Centro Atómico Constituyentes, San Martín (Argentina); Depero, Laura E., E-mail: laura.depero@unibs.it [Chemistry for Technologies Laboratory, University of Brescia, Brescia (Italy)

    2014-11-01

    Total Reflection X-Ray Fluorescence (TXRF) is a mature technique to evaluate quantitatively the elemental composition of liquid samples deposited on clean and well polished reflectors. In this paper the results of the first worldwide TXRF round-robin test of water samples, involving 18 laboratories in 10 countries are presented and discussed. The test was performed within the framework of the VAMAS project, interlaboratory comparison of TXRF spectroscopy for environmental analysis, whose aim is to develop guidelines and a standard methodology for biological and environmental analysis by means of the TXRF analytical technique. - Highlights: • The discussion of the first worldwide TXRF round-robin test of water samples (18 laboratories of 10 countries) is reported. • Drinking, waste, and desalinated water samples were tested. • Data dispersion sources were identified: sample concentration, preparation, fitting procedure, and quantification. • The protocol for TXRF analysis of drinking water is proposed.

  6. Uniaxial strength testing of Calico Hills tuff, Yucca Mountain: Preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Li, Qizhi; Schultz, R.A. [Univ. of Nevada, Reno, NV (United States)

    1994-12-31

    A detailed investigation of the strength properties of Calico Hills tuff was undertaken to further characterize the behavior of this unit. Uniaxial compression test on 47 samples of massive and reworked tuff show a dependence of peak strength and Young`s modulus on the total porosity, and thus on the geologic history of the Calico Hills tuff. Controlled deformation of test specimens documents axial splitting and faulting as failure mechanisms in the post-peak region of these brittle tuffs.

  7. Factors associated with medical student test anxiety in objective structured clinical examinations: a preliminary study

    Science.gov (United States)

    2016-01-01

    Objectives To investigate attributes of medical students associated with their test anxiety on Objective Structured Clinical Examinations (OSCEs). Methods A cross-sectional study using a self-administered questionnaire was conducted of all Year 3 and 4 students at a private medical school in South Korea in 2014. This 53-item questionnaire consisted of factors pertaining to test anxiety on the OSCE identified from a review of relevant literature, which included students’ motivational beliefs and achievement emotions, perceived values of the OSCE, and attitude and orientation towards patients. Participants’ test anxiety levels were measured using the Korean Achievement Emotions Questionnaire. Participants rated their responses using a five-point Likert-type scale. Univariate analysis was performed to examine relationships between the variables. Results A total of 94 students completed the questionnaire (a 93% response rate). No differences in the participants’ test anxiety scores were observed across genders, entry-levels, or years in medical school. Participants’ test anxiety on the OSCE showed moderate association with their class-related achievement emotions (i.e., anxiety and boredom), where r = 0.46 and 0.32, p OSCE (r = -0.21, p OSCE. These findings have implications for developing effective educational interventions for helping students cope with such a stress by enhancing our understanding of the various factors that influence their test anxiety in OSCEs. PMID:28035056

  8. Factors associated with medical student test anxiety in objective structured clinical examinations: a preliminary study.

    Science.gov (United States)

    Kim, Kyong-Jee

    2016-12-29

    To investigate attributes of medical students associated with their test anxiety on Objective Structured Clinical Examinations (OSCEs). A cross-sectional study using a self-administered questionnaire was conducted of all Year 3 and 4 students at a private medical school in South Korea in 2014. This 53-item questionnaire consisted of factors pertaining to test anxiety on the OSCE identified from a review of relevant literature, which included students' motivational beliefs and achievement emotions, perceived values of the OSCE, and attitude and orientation towards patients. Participants' test anxiety levels were measured using the Korean Achievement Emotions Questionnaire. Participants rated their responses using a five-point Likert-type scale. Univariate analysis was performed to examine relationships between the variables. A total of 94 students completed the questionnaire (a 93% response rate). No differences in the participants' test anxiety scores were observed across genders, entry-levels, or years in medical school. Participants' test anxiety on the OSCE showed moderate association with their class-related achievement emotions (i.e., anxiety and boredom), where r = 0.46 and 0.32, p anxiety on the OSCE. These findings have implications for developing effective educational interventions for helping students cope with such a stress by enhancing our understanding of the various factors that influence their test anxiety in OSCEs.

  9. Engineering, Manufacture and Preliminary Testing of the ITER Toroidal Field (TF) Magnet Helium Cold Circulator

    Science.gov (United States)

    Rista, P. E. C.; Shull, J.; Sargent, S.

    2015-12-01

    The ITER cryodistribution system provides the supercritical Helium (SHe) forced flow cooling to the magnet system using cold circulators. The cold circulators are located in each of five separate auxiliary cold boxes planned for use in the facility. Barber-Nichols Inc. has been awarded a contract from ITER-India for engineering, manufacture and testing of the Toroidal Field (TF) Magnet Helium Cold Circulator. The cold circulator will be extensively tested at Barber-Nichols’ facility prior to delivery for qualification testing at the Japan Atomic Energy Agency's (JAEA) test facility at Naka, Japan. The TF Cold Circulator integrates features and technical requirements which Barber-Nichols has utilized when supplying helium cold circulators worldwide over a period of 35 years. Features include a vacuum-jacketed hermetically sealed design with a very low helium leak rate, a heat shield for use with both nitrogen & helium cold sources, a broad operating range with a guaranteed isentropic efficiency over 70%, and impeller design features for high efficiency. The cold circulator will be designed to meet MTBM of 17,500 hours and MTBF of 36,000 hours. Vibration and speed monitoring are integrated into a compact package on the rotating assembly with operation and health monitoring in a multi-drop PROFIBUS communication environment using an electrical cabinet with critical features and full local and network PLC interface and control. For the testing in Japan and eventual installation in Europe, the cold circulator must be certified to the Japanese High Pressure Gas Safety Act (JHPGSA) and CE marked in compliance with the European Pressure Equipment Directive (PED) including Essential Safety Requirements (ESR). The test methodology utilized at Barber-Nichols’ facility and the resulting test data, validating the high efficiency of the TF Cold Circulator across a broad operating range, are important features of this paper.

  10. Preliminary Feed Test Algorithm for the Hanford Waste Vitrification Plant product composition control system

    Energy Technology Data Exchange (ETDEWEB)

    Bryan, M.F.; Piepel, G.F.

    1996-03-01

    The Feed Test Algorithm (FTA) will test the acceptability (conformance with requirements) of process batches in the Hanford Waste Vitrification Plant (HWVP). Although requirements and constraints will be imposed on properties of the material in the melter and the resulting glass, the FTA must test acceptability while the batch is still in the Slurry Mix Evaporator (SME), i.e., before material is transferred to the Melter Feed Tank. Hence, some properties upon which requirements will be imposed must be estimated from data available on the feed slurry. The major type of data to be used in this estimation is feed composition, usually expressed in terms of nine oxide mass fractions and a catchall tenth category, Others. Uncertainties are inherent in the HWVP process. The two major or types of uncertainty are composition uncertainty (that related to measurement and estimation of feed composition and other quantities) and model uncertainty (uncertainty inherent in the models developed to relate melt/glass properties to feed composition). Types of uncertainties, representation of uncertainty, and a method for combining uncertainties are discussed. The FTA must account for these uncertainties in testing acceptability; hence it must be statistical in nature. Three types of statistical intervals (confidence, prediction, and tolerance) are defined, and their roles in acceptance testing are discussed.

  11. Autologous serum skin test reactivity and basophil histamine release test in patients with nasal polyposis: preliminary results.

    Science.gov (United States)

    Zambetti, G; Ciofalo, A; Soldo, P; Fusconi, M; Romeo, R; Greco, A; Altissimi, G; Macri, G F; Marinelli, C; Pagliuca, G; De Vincentiis, M

    2010-01-01

    An eosinophilic inflammatory process is generally observed in patients suffering from nasal polyposis (NP), however its onset has not yet been defined. It has been suggested that immune activation of inflammatory cells may be the cause. The aim of this study is to verify whether autoantibodies and/or histamine-releasing factors are present in the serum of patients suffering from NP. In fact, we assume that autoantibodies and/or histamine-releasing factors, as already demonstrated in chronic idiopathic urticaria and asthma, may be involved in the pathogenesis of NP. In this case-control analytical study 40 patients with NP and 27 control subjects underwent the in vivo autologous serum skin test (ASST). The sera from 6 patients suffering from NP and 9 control group subjects, who had all been previously studied and randomly selected, underwent basophil histamine release assay from normal donor as a pilot study. The ASST showed positive results in 55% of patients suffering from NP versus 8% of the control group (p= .00006), the basophil histamine release test (BHRT) turned out positive in all patients tested and in 11% of the control group. We found a weak positive correlation between the percentage of histamine release and the wheal diameter. ASST reactivity is very frequent in patients suffering from NP, thus suggesting the presence of histamine-releasing factors in the blood stream. The BHRT was positive in the serum of all patients, thus suggesting the presence of anti-FcepsilonRI, anti-IgE autoantibodies and/or other histamine-releasing factors, the presence of which can play a role in triggering and maintaining the eosinophilic inflammatory process in NP.

  12. Preliminary Tests For Development Of A Non-Pertechnetate Analysis Method

    Energy Technology Data Exchange (ETDEWEB)

    Diprete, D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); McCabe, D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-09-28

    The objective of this task was to develop a non-pertechnetate analysis method that 222-S lab could easily implement. The initial scope involved working with 222-S laboratory personnel to adapt the existing Tc analytical method to fractionate the non-pertechnetate and pertechnetate. SRNL then developed and tested a method using commercial sorbents containing Aliquat® 336 to extract the pertechnetate (thereby separating it from non-pertechnetate), followed by oxidation, extraction, and stripping steps, and finally analysis by beta counting and Mass Spectroscopy. Several additional items were partially investigated, including impacts of a 137Cs removal step. The method was initially tested on SRS tank waste samples to determine its viability. Although SRS tank waste does not contain non-pertechnetate, testing with it was useful to investigate the compatibility, separation efficiency, interference removal efficacy, and method sensitivity.

  13. Preliminary Tests For Development Of A Non-Pertechnetate Analysis Method

    Energy Technology Data Exchange (ETDEWEB)

    Diprete, D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); McCabe, D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-09-28

    The objective of this task was to develop a non-pertechnetate analysis method that 222-S lab could easily implement. The initial scope involved working with 222-S laboratory personnel to adapt the existing Tc analytical method to fractionate the non-pertechnetate and pertechnetate. SRNL then developed and tested amethod using commercial sorbents containing Aliquat® 336 to extract the pertechnetate (thereby separating it from non-pertechnetate), followed by oxidation, extraction, and stripping steps, and finally analysis by beta counting and Mass Spectroscopy. Several additional items were partially investigated, including impacts of a 137Cs removal step. The method was initially tested on SRS tank waste samples to determine its viability. Although SRS tank waste does not contain non-pertechnetate, testing with it was useful to investigate the compatibility, separation efficiency, interference removal efficacy, and method sensitivity.

  14. PRELIMINARY TEST RESULTS OF A PROTOTYPE FAST KICKER FOR APS MBA UPGRADE

    Energy Technology Data Exchange (ETDEWEB)

    Yao, C.-Y.; Morrison, L.; Sun, X.; Wang, J.; Cours, A.; Westferro, F.; Xiao, A.; Clute, T.; Conway, Z.; Decker, G.; Lenkszus, F.; Carwardine, J.; Barcikowski, A.; Keane, R.; Brill, A.

    2017-06-25

    The APS multi-bend achromatic (MBA) upgrade storage ring plans to support two bunch fill patterns: a 48-bunch and a 324-bunch. A “swap out” injection scheme is required. In order to provide the required kick to injected beam, to minimize the beam loss and residual oscillation of injected beam, and to minimize the perturbation to stored beam during injection, the rise, fall, and flat-top parts of the kicker pulse must be within a 16.9-ns interval. Stripline-type kickers are chosen for both injection and extraction. We developed a prototype kicker that supports a ±15kV differential pulse voltage. We performed high voltage discharge, TDR measurement, high voltage pulse test and beam test of the kicker. We report the final design of the fast kicker and the test results.

  15. Preliminary laboratory testing on the sound absorption of coupled cavity sonic crystal

    Science.gov (United States)

    Kristiani, R.; Yahya, I.; Harjana; Suparmi

    2016-11-01

    This paper focuses on the sound absorption performance of coupled cavity sonic crystal. It constructed by a pair of a cylindrical tube with different values in diameters. A laboratory test procedure after ASTM E1050 has been conducted to measure the sound absorption of the sonic crystal elements. The test procedures were implemented to a single coupled scatterer and also to a pair of similar structure. The results showed that using the paired structure bring a better possibility for increase the sound absorption to a wider absorption range. It also bring a practical advantage for setting the local Helmholtz resonant frequency to certain intended frequency.

  16. First Total Reflection X-Ray Fluorescence round-robin test of water samples: Preliminary results

    Science.gov (United States)

    Borgese, Laura; Bilo, Fabjola; Tsuji, Kouichi; Fernández-Ruiz, Ramón; Margui, Eva; Streli, Christina; Pepponi, Giancarlo; Stosnach, Hagen; Yamada, Takashi; Vandenabeele, Peter; Maina, David M.; Gatari, Michael; Shepherd, Keith D.; Towett, Erick K.; Bennun, Leonardo; Custo, Graciela; Vasquez, Cristina; Depero, Laura E.

    2014-11-01

    Total Reflection X-Ray Fluorescence (TXRF) is a mature technique to evaluate quantitatively the elemental composition of liquid samples deposited on clean and well polished reflectors. In this paper the results of the first worldwide TXRF round-robin test of water samples, involving 18 laboratories in 10 countries are presented and discussed. The test was performed within the framework of the VAMAS project, interlaboratory comparison of TXRF spectroscopy for environmental analysis, whose aim is to develop guidelines and a standard methodology for biological and environmental analysis by means of the TXRF analytical technique.

  17. High Temperature Test Facility Preliminary RELAP5-3D Input Model Description

    Energy Technology Data Exchange (ETDEWEB)

    Bayless, Paul David [Idaho National Laboratory

    2015-12-01

    A RELAP5-3D input model is being developed for the High Temperature Test Facility at Oregon State University. The current model is described in detail. Further refinements will be made to the model as final as-built drawings are released and when system characterization data are available for benchmarking the input model.

  18. Preliminary experimental results from the ICARUS test facility at INFN-LNL

    Energy Technology Data Exchange (ETDEWEB)

    Varanini, F. [Dept. of Physics and INFN, University of Padova, via Marzolo 8, 35100 Padova (Italy)

    2009-12-15

    A liquid Argon TPC with a sensitive volume of 27 l has been operated with cosmic rays in the INFN-LNL laboratories. This detector is used to test possible DAQ and trigger solutions for ICARUS and future liquid Argon TPCs.

  19. High Temperature Steam Electrolysis Materials Degradation: Preliminary Results of Corrosion Tests on Ceramatec Electrolysis Cell Components

    Energy Technology Data Exchange (ETDEWEB)

    Paul Demkowicz; Prateek Sachdev; Kevin DeWall; Pavel Medvedev

    2007-06-01

    Corrosion tests were performed on stainless steel and nickel alloy coupons in H2O/H2 mixtures and dry air to simulate conditions experienced in high temperature steam electrolysis systems. The stainless steel coupons were tested bare and with one of three different proprietary coatings applied. Specimens were corroded at 850°C for 500 h with weight gain data recorded at periodic intervals. Post-test characterization of the samples included surface and cross-section scanning electron microscopy, grazing incidence x-ray diffraction, and area-specific resistance measurements. The uncoated nickel alloy outperformed the ferritic stainless steel under all test conditions based on weight gain data. Parabolic rate constants for corrosion of these two uncoated alloys were consistent with values presented in the literature under similar conditions. The steel coatings reduced corrosion rates in H2O/H2 mixtures by as much as 50% compared to the untreated steel, but in most cases showed negligible corrosion improvement in air. The use of a rare-earth-based coating on stainless steel did not result in a significantly different area specific resistance values after corrosion compared to the untreated alloy. Characterization of the samples is still in progress and the findings will be revised when the complete data set is available.

  20. Preliminary report on engineering geology of thirteen tunnel sites, Nevada Test Site

    Science.gov (United States)

    Wilmarth, Verl Richard; McKeown, Francis Alexander; Dobrovolny, Ernest

    1958-01-01

    Reconnaissance of 13 areas in and adjacent to Nevada Test Site was completed. Of the 13 areas, Forty Mile Canyon, South-central Shoshone Mountain, and Southeast Shoshone Mountain named in order of preference, offer many advantages for carrying on future underground nuclear explosions.

  1. A preliminary neutronic evaluation of high temperature engineering test reactor using the SCALE6 code

    Science.gov (United States)

    Tanure, L. P. A. R.; Sousa, R. V.; Costa, D. F.; Cardoso, F.; Veloso, M. A. F.; Pereira, C.

    2014-02-01

    Neutronic parameters of some fourth generation nuclear reactors have been investigated at the Departamento de Engenharia Nuclear/UFMG. Previous studies show the possibility to increase the transmutation capabilities of these fourth generation systems to achieve significant reduction concerning transuranic elements in spent fuel. To validate the studies, a benchmark on core physics analysis, related to initial testing of the High Temperature Engineering Test Reactor and provided by International Atomic Energy Agency (IAEA) was simulated using the Standardized Computer Analysis for Licensing Evaluation (SCALE). The CSAS6/KENO-VI control sequence and the 44-group ENDF/B-V 0 cross-section neutron library were used to evaluate the keff (effective multiplication factor) and the result presents good agreement with experimental value.

  2. Preliminary results on performance testing of a turbocharged rotary combustion engine

    Science.gov (United States)

    Meng, P. R.; Rice, W. J.; Schock, H. J.; Pringle, D. P.

    1982-01-01

    The performance of a turbocharged rotary engine at power levels above 75 kW (100 hp) was studied. A twin rotor turbocharged Mazda engine was tested at speeds of 3000 to 6000 rpm and boost pressures to 7 psi. The NASA developed combustion diagnostic instrumentation was used to quantify indicated and pumping mean effect pressures, peak pressure, and face to face variability on a cycle by cycle basis. Results of this testing showed that a 5900 rpm a 36 percent increase in power was obtained by operating the engine in the turbocharged configuration. When operating with lean carburetor jets at 105 hp (78.3 kW) and 4000 rpm, a brake specific fuel consumption of 0.45 lbm/lb-hr was measured.

  3. F-111 Adhesively Bonded Repair Assessment Program (FABRAP) - Phase 1 Testing, Preliminary Results

    Science.gov (United States)

    2011-08-01

    UNCLASSIFIED 4 UNCLASSIFED DSTO-TN-1024  aircraft that have been reserved for other use such as museum displays. Negotiations are underway to test...additional hazards when used outside of a fume cupboard/booth. Citrasafe is a non-toxic low volatile plant extract solvent which has been shown to be...work during hayfever seasons may expose workers to pollen allergens. Staff with known allergies will be advised to prepare by using

  4. Mastitis diagnosis in dairy goats through somatic cell counts and California mastitis test. Preliminary results

    OpenAIRE

    Mendonça, Álvaro; Valentim, Ramiro; Nunes, Manuel; Correia, Teresa Montenegro; Trigo, Margarida; Maurício, Raimundo; Costa, Cristina; Coelho, Alípio

    2004-01-01

    The aim of this work was to evaluate somatic cell count (SCC) and Californian mastitis test (CMT) reliability as methods to survey mastitis in Serrana goats. Microbiological diagnosis, SCC and CTM were performed on 2028 samples, collected from individual glands during a lactation period. According to results CMT (predictive negative value = 69.5%) may be used as a cheap and practical method for sub clinical mastitis survey in Serrana goats. Decision on SCC use will depend on additional resear...

  5. [Preliminary Study on Error Control of Medical Devices Test Reports Based on the Analytic Hierarchy Process].

    Science.gov (United States)

    Huang, Yanhong; Xu, Honglei; Tu, Rong; Zhang, Xu; Huang, Min

    2016-01-01

    In this paper, the common errors in medical devices test reports are classified and analyzed. And then the main 11 influence factors for these inspection report errors are summarized. The hierarchy model was also developed and verified by presentation data using MATLAB. The feasibility of comprehensive weights quantitative comparison has been analyzed by using the analytic hierarchy process. In the end, this paper porspects the further research direction.

  6. New method for rapid Susceptibility Testing on blood culture with HB&L system: preliminary data

    Directory of Open Access Journals (Sweden)

    Vincenzo Rondinelli

    2010-12-01

    Full Text Available Blood culture, although represents the gold standard in detecting the ethiological agent of sepsis, is rather rarely required in relation to the real diagnostic importance. The result of this test depends in fact on many factors (sample volume, time of collection, accuracy, antibiotic therapy, contamination, number of drawings, drawing site, interpretation difficulties, etc. that are often considered by many clinicians so limited as to doubt about their actual value. The disadvantages are therefore represented by the lack of standardization but also by the low sensitivity and above all by the technical times too long for the clinical needs. Blood culture begins with the drawing of samples from the “septic” patient followed incubation of the bottles in automatic thermostated systems. In case of positive result (36 hours, the culture is Gram stained and streaked on solid media in order to obtain isolated colonies for the identification and the susceptibility testing (48 hours from positive result. The long time required for pathogen identification and susceptibility testing involves empirical broad spectrum antibiotic therapy that can promote the increase of bacterial resistance but also patient management costs. A clinically useful report should be available on short notice in order to guide the clinician to choose the most appropriate antibiotic. The microbiologist has therefore the hard work of reviewing the organization and the management of the procedures.We have therefore started to consider the possibility of treating the blood as an biological liquid in order to quickly determine the susceptibility of bacteria to antibiotics.

  7. Preliminary Benchmark Evaluation of Japan’s High Temperature Engineering Test Reactor

    Energy Technology Data Exchange (ETDEWEB)

    John Darrell Bess

    2009-05-01

    A benchmark model of the initial fully-loaded start-up core critical of Japan’s High Temperature Engineering Test Reactor (HTTR) was developed to provide data in support of ongoing validation efforts of the Very High Temperature Reactor Program using publicly available resources. The HTTR is a 30 MWt test reactor utilizing graphite moderation, helium coolant, and prismatic TRISO fuel. The benchmark was modeled using MCNP5 with various neutron cross-section libraries. An uncertainty evaluation was performed by perturbing the benchmark model and comparing the resultant eigenvalues. The calculated eigenvalues are approximately 2-3% greater than expected with an uncertainty of ±0.70%. The primary sources of uncertainty are the impurities in the core and reflector graphite. The release of additional HTTR data could effectively reduce the benchmark model uncertainties and bias. Sensitivity of the results to the graphite impurity content might imply that further evaluation of the graphite content could significantly improve calculated results. Proper characterization of graphite for future Next Generation Nuclear Power reactor designs will improve computational modeling capabilities. Current benchmarking activities include evaluation of the annular HTTR cores and assessment of the remaining start-up core physics experiments, including reactivity effects, reactivity coefficient, and reaction-rate distribution measurements. Long term benchmarking goals might include analyses of the hot zero-power critical, rise-to-power tests, and other irradiation, safety, and technical evaluations performed with the HTTR.

  8. Preliminary study of Internet addiction and cognitive function in adolescents based on IQ tests.

    Science.gov (United States)

    Park, Min-Hyeon; Park, E-Jin; Choi, Jeewook; Chai, Sukhi; Lee, Ji-Han; Lee, Chul; Kim, Dai-Jin

    2011-12-30

    The potential relationship between Internet addiction and certain cognitive function problems has been suggested by several studies. However, few or no studies have examined the differences in cognitive functioning between persons addicted to the Internet and persons not addicted using a standard neuropsychological test. This study screened 253 middle school students and 389 high school students for Internet addiction and compared 59 Internet-addicted students with 43 non-addicted students using an IQ test. The Internet-addicted group had comprehension sub-item scores that were significantly lower than those of the non-addicted group. As the comprehension item reflects ethical judgement and reality testing, there may be a relationship between Internet addiction and weak social intelligence. Earlier onset of Internet addiction and longer addiction duration were associated with lower participant performance in areas related to attention. As this study is a cross-sectional study, it is not clear whether the persons who display weak cognitive functioning are susceptible to Internet addiction or if Internet addiction causes cognitive problems. However, as brain development remains active during adolescence, the possibility that Internet addiction adversely affects the cognitive functioning of adolescents cannot be ruled out.

  9. Establishment and Preliminary Application of a Rapid Fluorescent Focus Inhibition Test (RFFIT) for Rabies Virus

    Institute of Scientific and Technical Information of China (English)

    Pengcheng Yu; Xinjun Lv; Xinxin Shen; Qing Tang; Guodong Liang

    2013-01-01

    The World Health Organization (WHO) standard assay for determining levels of the rabies virus neutralization antibody (RVNA) is the rapid fluorescent focus inhibition test (RFFIT),which is used to evaluate the immunity effect after vaccination against rabies.For RFFIT,CVS-11 was used as the challenge virus,BSR cells as the adapted cells,and WHO rabies immunoglobulin (WHO STD) as the reference serum in this study.With reference to WHO and Pasteur RFFIT procedures,a micro-RFFIT procedure adapted to our laboratory was produced,and its specificity and reproducibility were tested.We tested levels of RVNA in human serum samples after immunization with different human rabies vaccines (domestic purified Vero cell rabies vaccine (PVRV) and imported purified chick embryo cell vaccine (PCECV)) using different regimens (Zagreb regimen and Essen regimen).We analyzed the levels of RVNA,and compared the immune efficacy of domestic PVRV and imported PCECV using different immunization regimens.The results showed that the immune efficacy of domestic PVRV using the Zagreb regimen was as good as that of the imported PCECV,but virus antibodies were generated more rapidly with the Zagreb regimen than with the Essen regimen.The RFFIT procedure established in our laboratory will enhance the comprehensive detection ability of institutions involved in rabies surveillance in China.

  10. New sonographically-guided test for anterior knee instability – preliminary report

    Directory of Open Access Journals (Sweden)

    Piotr Grzelak

    2014-09-01

    Full Text Available Aim of the study: Ultrasound examination is widely used in orthopedic diagnostics, however sonographic evaluation of traumatic anterior cruciate ligament insufficiency is still inadequate. Aim of this study is to evaluate diagnostic capability of a new sonographicallyguided test for diagnosing complete anterior cruciate ligament insufficiency. Material and methods: In 47 patients, with suspicion of unilateral anterior cruciate ligament injury (based on magnetic resonance imaging, the sonographically-guided test for anterior instability was performed. The translation of the intercondylar eminence against the patellar tendon was measured in both knees. Afterwards all patients underwent arthroscopy. Results: In 37 patients, with arthroscopically confirmed complete anterior cruciate ligament insufficiency, the mean anterior knee translation was 8.3 mm (SD = 2.8 in affected knee vs. 3 mm (SD = 1.1 in uninjured knee (p < 0.001. In 10 patients with no anterior cruciate ligament insufficiency the difference between body sides was not significant (2.6 mm, SD = 1.4 in injured knee vs. 2.5 mm, SD = 1.1 in uninjured joint; p < 0.7753. Conclusions: The proposed test supports the clinician with fast and noninvasive examination that can facilitate evaluation of anterior knee instability.

  11. An irradiation test of heat-resistant ceramic composite materials. Interim report on post-irradiation examinations of the first preliminary irradiation test: 97M-13A

    Energy Technology Data Exchange (ETDEWEB)

    Baba, Shin-ichi; Takahashi, Tsuneo; Ishihara, Masahiro; Hayashi, Kimio; Sozawa, Shizuo; Saito, Takashi [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment; Suzuki, Yoshio [Nuclear Engineering, Co. Ltd., Osaka (Japan); Saito, Tamotsu; Sekino, Hajime [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2001-03-01

    The Japan Atomic Energy Research Institute (JAERI) has been carrying out the research on radiation damage mechanism of heat-resistant ceramic composite materials, as one of the subjects of the innovative basic research on high temperature engineering using the High Temperature Engineering Test Reactor (HTTR). A series of preliminary irradiation tests is being made using the Japan Materials Testing Reactor (JMTR). The present report describes results of post-irradiation examinations (PIE) so far on specimens irradiated in the first capsule, designated 97M-13A, to fast neutron fluences of 1.2-1.8x10{sup 24} m{sup -2} (E>1 MeV) at temperatures of 573, 673 and 843 K. In the PIE, measurements were made on (1) dimensional changes, (2) thermal expansions, (3) X-ray parameters and (4) {gamma}-ray spectra. The results for the carbon/carbon and SiC/SiC composites were similar to those in existing literatures. The temperature monitor effect was observed both for SiC fiber- and particle-reinforced SiC composites as in the case of monolithic SiC. Namely, the curve of the coefficient of thermal expansion (CTE) of these specimens showed a rapid drop above a temperature around the irradiation temperature +100 K in the first ramp (ramp rate: 10 K/min), while in the second ramp the CTE curves were almost the same as those of un-irradiated SiC specimens. (author)

  12. Jaw-opening force test to screen for Dysphagia: preliminary results.

    Science.gov (United States)

    Hara, Koji; Tohara, Haruka; Wada, Satoko; Iida, Takatoshi; Ueda, Koichiro; Ansai, Toshihiro

    2014-05-01

    To assess the jaw-opening force test (JOFT) for dysphagia screening. Criterion standard. University dental hospital. Patients complaining of dysphagia (N=95) and with symptoms of dysphagia with chronic underlying causes (mean age ± SD, 79.3±9.61y; range, 50-94y; men: n=49; mean age ± SD, 77.03±9.81y; range, 50-94y; women: n=46; mean age ± SD, 75.42±9.73y; range, 51-93y) admitted for treatment between May 2011 and December 2012 were included. None. All patients were administered the JOFT and underwent fiberoptic endoscopic evaluation of swallowing (FEES). The mean jaw-opening strength was compared with aspiration (ASP) and pharyngeal residue observations of the FEES, which was used as the criterion standard. A receiver operating characteristic (ROC) curve analysis was performed. Forces of ≤3.2kg for men and ≤4kg for women were appropriate cutoff values for predicting ASP with a sensitivity and specificity of .57 and .79 for men and .93 and .52 for women, respectively. Based on the ROC analyses for predicting pharyngeal residue, forces of ≤5.3kg in men and ≤3.9kg in women were appropriate cutoff values, with a sensitivity and specificity of .80 and .88 for men and .83 and .81 for women, respectively. The JOFT could be a useful screening tool for predicting pharyngeal residue and could provide useful information to aid in the referral of patients for further diagnostic imaging testing. However, given its low sensitivity to ASP the JOFT should be paired with other screening tests that predict ASP. Copyright © 2014 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  13. Preliminary Tests of Nose- and Side- Entrance Blower Cooling Systems for Radial Engines, Special Report

    Science.gov (United States)

    Biermann, David; Valentine, E. Floyd

    1939-01-01

    Two cowling systems intended to reduce the drag and improve the low-speed cooling characteristics of conventional radial engine cowlings were tested in model form to determine the practicability of the methods. One cowling included a blower mounted on the rear face of a large propeller spinner which drew cooling air in through side entrance ducts located behind the equivalent engine orifice plate. The air was passed through the equivalent engine orifice plate from rear to front and out through a slot between the spinner and the engine plate. The blower produced substantially all the power necessary to circulate the cooling air in some cases, so the quantity of air flowing was independent of the air speed, Two types of blowers were used, a centrifugal type and one using airfoil blades which forced the air outward from the center of rotation. The other cowling was similar to the conventional N.A.C.A. cowling except for the addition of a large propeller spinner nose. The spinner was provided with a hole in the nose to admit cooling air and blower blades to increase the pressure for cooling at low speeds. The tests show that with both cowling types the basic drag of the nacelle was reduced substantially below that for the N.A.C.A. cowling by virtue of the better nose shape made possible by the spinner . The drag due to the side-entrance ducts was nearly zero when the openings were closed or when the blower was drawing in a certain quantity of air in proportion to the air speed. The drag increased, however, when air mas allowed to spill from the openings. The nose-entrance blower showed considerable promise as a cooling means although the blower tested was relatively inefficient, owing to the fact that the blower compartments evidently were expanded too rapidly under the conditions imposed. by the design.

  14. A preliminary guidebook for identifying stratigraphic contacts at the Nevada Test Site

    Energy Technology Data Exchange (ETDEWEB)

    Pawloski, G.A.; McKague, H.L.; Wagoner, J.L. [Lawrence Livermore National Lab., CA (United States); McKinnis, W.B. [Lawrence Livermore National Lab., Mercury, NV (United States)

    1992-01-01

    Lithologic variation, regional depositional trends, and the lack of written guidelines have resulted in inconsistencies in the recognition of stratigraphic contacts in drill holes at the Nevada Test Site (NTS). Stratigraphic identification, based on mineralogy of discrete samples, can be augmented by geophysical logs and downhole movies to more accurately and consistently locate contacts between units. Criteria are established for locating the base of the Pahute Mesa ash-flow tuff, the top of the Ammonia Tanks ash-flow tuff, the top of the Ammonia Tanks bedded tuff, and the top and the base of the Rainier Mesa Tuff.

  15. Blood splash in lambs-a preliminary study using the one-stage prothrombin time test.

    Science.gov (United States)

    Restall, D J

    1981-02-01

    Lambs from a flock in which a high incidence of blood splash had been detected were examined using the one-stage prothrombin test. For comparison lambs from a commercial slaughter line were also examined. All the affected lambs and 35·4% from the slaughter line had extended prothrombin times, and a relationship between extended prothrombin times and the occurrence of blood splash was established. Investigation of the pastures grazed by the affected flock showed the presence of coumarin producing plants and grasses. Some coumarin drugs prolong one-stage prothrombin times, and more importantly, induce capillary fragility, thus predisposing animals to blood splash.

  16. The Gaia-FUN-SSO observation campaign of 99942 Apophis: A preliminary test for the network

    CERN Document Server

    Bancelin, D; Ivantsov, A; Desmars, J; Assafin, M; Eggl, S; Hestroffer, D; Rocher, P; Carry, B; David, P

    2016-01-01

    In order to test the coordination and evaluate the overall performance of the Gaia-FUN-SSO, an observation campaign on the Potentially Hazardous Asteroid (99 942) Apophis was conducted from 12/21/2012 to 5/2/2013 providing 2732 high quality astrometric observations. We show that a consistent reduction of astrometric campaigns with reliable stellar catalogs substantially improves the quality of astrometric results. We present evidence that the new data will help to reduce the orbit uncertainty of Apophis during its close approach in 2029.

  17. Development and Preliminary Tests of an Open-Path Airborne Diode Laser Absorption Instrument for Carbon Dioxide

    Science.gov (United States)

    Diskin, Glenn S.; DiGangi, Joshua P.; Yang, Melissa; Slate, Thomas A.; Rana, Mario

    2015-01-01

    Carbon dioxide (CO2) is well known for its importance as an atmospheric greenhouse gas, with many sources and sinks around the globe. Understanding the fluxes of carbon into and out of the atmosphere is a complex and daunting challenge. One tool applied by scientists to measure the vertical flux of CO2 near the surface uses the eddy covariance technique, most often from towers but also from aircraft flying specific patterns over the study area. In this technique, variations of constituents of interest are correlated with fluctuations in the local vertical wind velocity. Measurement requirements are stringent, particularly with regard to precision, sensitivity to small changes, and temporal sampling rate. In addition, many aircraft have limited payload capability, so instrument size, weight, and power consumption are also important considerations. We report on the development and preliminary application of an airborne sensor for the measurement of atmospheric CO2. The instrument, modeled on the successful DLH (Diode Laser Hygrometer) series of instruments, has been tested in the laboratory and on the NASA DC-8 aircraft. Performance parameters such as accuracy, precision, sensitivity, specificity, and temporal response are discussed in the context of typical atmospheric variability and suitability for flux measurement applications. On-aircraft, in-flight data have been obtained and are discussed as well. Performance of the instrument has been promising, and continued flight testing is planned during 2016.

  18. Skin Prick Test Analysis in Allergic Rhinitis Patients: A Preliminary Study in Abuja, Nigeria

    Directory of Open Access Journals (Sweden)

    P. U. Ibekwe

    2016-01-01

    Full Text Available Allergic rhinitis (AR is prevalent in Nigeria, though little information exists on the allergen. We assessed the clinical features of AR patients in our environment based on the allergic rhinitis impact on asthma (ARIA classification. Only patients with positive skin prick test (SPT were recruited. Seventy-four patients participated in the study. AR and asthma comorbidity were observed in 13.5%. The proportion of “sneezers-runners” was higher than “blockers” with significantly more “sneezers-runners” having persistent AR (P=0.007. No relationship was established between these predominant symptoms and the aeroallergens used in this study. Intermittent mild and moderate/severe AR were evident in 13.5% and 31.1%, while persistent mild and moderate/severe were seen in 20.3% and 35.1%, respectively. House dust mites allergen yielded the highest number of positive responses (22.6% followed by tree pollen (16.8%. No relationship was observed between the allergens tested and AR severity. Majority of patients were oligosensitive (33.8% and polysensitive (35.1% and were not significantly associated with AR severity (P=0.07. Most AR patients presenting for treatment in Abuja, Nigeria, had moderate-severe persistent AR and showed similar SPT sensitization pattern with countries having similar climatic conditions. Sensitization patterns were not related to ARIA classification or predominant AR symptoms.

  19. Word memory test performance in Canadian adolescents with learning disabilities: a preliminary study.

    Science.gov (United States)

    Larochette, Anne-Claire; Harrison, Allyson G

    2012-01-01

    The purpose of this study was to evaluate Word Memory Test (WMT) performances in students with identified learning disabilities (LDs) providing good effort to examine the influence of severe reading or learning problems on WMT performance. Participants were 63 students with LDs aged 11 to 14 years old (M = 12.19 years), who completed psychoeducational assessments as part of a transition program to secondary school. Participants were administered a battery of psychodiagnostic tests including the WMT. Results indicated that 9.5% of students with LD met Criterion A on the WMT (i.e., perform below cut-offs on any of the first three subtests of the WMT), but less than 1% met both criteria necessary for identification of low effort. Failure on the first three subtests of the WMT was associated with word reading at or below the 1st percentile and severely impaired phonetic decoding and phonological awareness skills. These results indicate that the majority of students with a history of LD are capable of passing the WMT, and use of profile analysis reduces the false-positive rate to below 1%.

  20. Preliminary CFD Assessment of an Experimental Test Facility Operating with Heavy Liquid Metals

    Directory of Open Access Journals (Sweden)

    Matteo Lizzoli

    2017-01-01

    Full Text Available The CFD analysis of a Venturi nozzle operating in LBE (key component of the CIRCE facility, owned by ENEA is presented in this paper. CIRCE is a facility developed to investigate in detail the fluid-dynamic behavior of ADS and/or LFR reactor plants. The initial CFD simulations have been developed hand in hand with the comparison with experimental data: the test results were used to confirm the reliability of the CFD model, which, in turn, was used to improve the interpretation of the experimental data. The Venturi nozzle is modeled with a 3D CFD code (STAR-CCM+. Later on, the CFD model has been used to assess the performance of the component in conditions different from the ones tested in CIRCE: the performance of the Venturi is presented, in terms of pressure drops, for various operating conditions. Finally, the CFD analysis has been focused on the evaluation of the effects of the injection of an inert gas in the flow of the liquid coolant on the performance of the Venturi nozzle.

  1. A Structured Clinical Interview for Kleptomania (SCI-K): preliminary validity and reliability testing.

    Science.gov (United States)

    Grant, Jon E; Kim, Suck Won; McCabe, James S

    2006-06-01

    Kleptomania presents difficulties in diagnosis for clinicians. This study aimed to develop and test a DSM-IV-based diagnostic instrument for kleptomania. To assess for current kleptomania the Structured Clinical Interview for Kleptomania (SCI-K) was administered to 112 consecutive subjects requesting psychiatric outpatient treatment for a variety of disorders. Reliability and validity were determined. Classification accuracy was examined using the longitudinal course of illness. The SCI-K demonstrated excellent test-retest (Phi coefficient = 0.956 (95% CI = 0.937, 0.970)) and inter-rater reliability (phi coefficient = 0.718 (95% CI = 0.506, 0.848)) in the diagnosis of kleptomania. Concurrent validity was observed with a self-report measure using DSM-IV kleptomania criteria (phi coefficient = 0.769 (95% CI = 0.653, 0.850)). Discriminant validity was observed with a measure of depression (point biserial coefficient = -0.020 (95% CI = -0.205, 0.166)). The SCI-K demonstrated both high sensitivity and specificity based on longitudinal assessment. The SCI-K demonstrated excellent reliability and validity in diagnosing kleptomania in subjects presenting with various psychiatric problems. These findings require replication in larger groups, including non-psychiatric populations, to examine their generalizability. Copyright (c) 2006 John Wiley & Sons, Ltd.

  2. Clinical utility of the Multiple Errands Test in schizophrenia: A preliminary assessment.

    Science.gov (United States)

    Bulzacka, Ewa; Delourme, Gwenaëlle; Hutin, Valérie; Burban, Nathalie; Méary, Alexandre; Lajnef, Mohamed; Leboyer, Marion; Schürhoff, Franck

    2016-06-30

    Schizophrenia (SZ) is a chronic, severe disease, which results in misperception of reality, major social withdrawal, and cognitive disturbances. One type of cognitive disturbance, known as executive dysfunction, is widely considered as a primary determinant of functional outcome. However, classic neuropsychological measures of executive functioning (EF) poorly represent patients' functional outcome, and thus seem inappropriate for evaluating the real-world functional impact of diseases such as SZ. We hypothesized that the Multiple Errands Test (MET), an ecological assessment of executive function would show greater ability to measure everyday adaptive functioning SZ, compared to conventional EF assessment methods. 100 clinically stable SZ patients were administered the MET, Wisconsin Card Sorting Test - 64 and a paper version of MET. Correlation analyses were performed between each EF measure and functional outcome, as measured by the Social Autonomy Scale (SAS). After adjusting for age, education, IQ and illness duration, SAS was significantly predicted by MET global score. No other EF measure correlated with SAS. Results from this study suggest that MET offers a valuable prediction of daily life functional outcome in this large sample of SZ patients. Therefore, it could be used as a complementary measure to improve the identification of executive dysfunctions prior to psychosocial interventions.

  3. High-resolution cross-borehole thermal tracer testing in granite: preliminary field results

    Science.gov (United States)

    Brixel, Bernard; Klepikova, Maria; Jalali, Mohammadreza; Amann, Florian; Loew, Simon

    2017-04-01

    Understanding how heat is transported, stored and exchanged across fractured media is becoming increasingly relevant in our society, as manifested from the growing popularity of modern technologies relying on the subsurface to either source or store heat. One good example is the utilization of heat from deep hydrothermal or petrothermal systems to generate electricity for base load power generation, a technology also known as deep geothermal energy (DGE). While very attractive in principle, the number of geothermal fields producing economical levels of electricity to this day is still very limited - largely due to the difficulty of either locating deep reservoirs that are both sufficiently hot and permeable or, in the absence of the latter, creating them. In this context, the Swiss Competence Center for Energy Research - Supply of Electricity (SCCER - SoE) is carrying out an in situ stimulation and circulation (ISC) experiment at the Grimsel Test Site (GTS), an underground rock lab located in the Aar massif, in the Swiss Alps. The circulation experiment planned for the post-stimulation phase represents one of the key components of this experimental research program, and the outcome of this test is expected to ultimately provide key insights in the factors controlling the performance of enhanced geothermal reservoirs. Therefore, to support the design of this experiment, short-term thermal tracer tests (TTT) were conducted with the objective to (i) assess the feasibility of conducting TTTs in a relatively intact granite (where fluid flow is controlled by a limited number of discrete fractures); (ii) determine optimal experimental setups; and to ultimately (iii) monitor thermal breakthroughs at high spatial and temporal resolution, providing insights on heat transport and complementing the characterization of hydrogeological conditions carried out through conventional means (e.g. hydraulic and/or solute tracer tests). Presented herein are the results of a 10-day

  4. Preliminary tests of silicon carbide based concretes for hybrid rocket nozzles in a solar furnace

    Science.gov (United States)

    D'Elia, Raffaele; Bernhart, Gérard; Cutard, Thierry; Peraudeau, Gilles; Balat-Pichelin, Marianne

    2014-06-01

    This research is part of the PERSEUS project, a space program concerning hybrid propulsion and supported by CNES. The main goal of this study is to characterise silicon carbide based micro-concrete with a maximum aggregates size of 800 μm, in a hybrid propulsion environment. The nozzle throat has to resist to a highly oxidising polyethylene (PE)/N2O hybrid environment, under temperatures ranging up to 2980 K. The study is divided into two main parts: the first one deals with the thermo-mechanical characterisation of the material up to 1500 K and the second one with an investigation on the oxidation behaviour in a standard atmosphere, under a solar flux up to 13.5 MW/m2. Young's modulus was determined by resonant frequency method: results show an increase with the stabilisation temperature. Four point bending tests have shown a rupture tensile strength increasing with stabilisation temperature, up to 1473 K. Sintering and densification processes are primary causes of this phenomenon. Visco-plastic behaviour appears at 1373 K, due to the formation of liquid phases in cement ternary system. High-temperature oxidation in ambient air was carried out at PROMES-CNRS laboratory, on a 2 kW solar furnace, with a concentration factor of 15,000. A maximum 13.5 MW/m2 incident solar flux and a 7-90 s exposure times have been chosen. Optical microscopy, SEM, EDS analyses were used to determine the microstructure evolution and the mass loss kinetics. During these tests, silicon carbide undergoes active oxidation with production of SiO and CO smokes and ablation. A linear relation between mass loss and time is found. Oxidation tests performed at 13.5 MW/m2 solar flux have shown a mass loss of 10 mg/cm2 after 15 s. After 90 s, the mass loss reaches 60 mg/cm2. Surface temperature measurement is a main point in this study, because of necessity of a thermo-mechanical-ablative model for the material. Smokes appear at around 5.9 MW/m2, leading to the impossibility of useful temperature

  5. Preliminary Study on Mg content of hard part(Test) of a benthic foraminifer from the inner shelf, off West Coast of India

    Digital Repository Service at National Institute of Oceanography (India)

    Khare, N.; Nigam, R.; Iyer, S.D.

    A preliminary study has been made for trace element (Mg) in the test of benthic species Bulimina exilis from a shallow sediment core (at 22 m water depth) off west coast of India using Electron Probe Microanalyser (EPMA) The Mg content is selected...

  6. Preliminary Beam Tests at REX for an Automatic Cavity Phasing Routine at HIE-ISOLDE

    CERN Document Server

    Fraser, M A; Broere, J; Lanaia, D; Valuch, D

    2013-01-01

    The HIE upgrade at ISOLDE will use 32 independently phased superconducting quarterwave cavities, which will impose new demands on the operation and set-up of the linac. The large range of different radioactive species and the broad experimental programme means that the same beam species and energy are rarely studied twice, and the accelerator must be re-tuned for each experimental run. In order to expedite machine set-up it is foreseen to calculate and set automatically the cavity phases when the operator inputs the desired beam energy and A/q of the beam species. In this note we explore our understanding of the REX rf system and test our beam dynamics calculations with two independently phased 7-gap split-ring cavities.

  7. Preliminary testing of the role of exercise and predator recognition for bonytail and razorback sucker

    Science.gov (United States)

    Mueller, Gordon A.; Carpenter, Jeanette; Krapfel, Robert; Figiel, Chester

    2007-01-01

    Hatchery-reared juvenile, suckers appeared curious and showed no sign of predator avoidance when initially placed with large (>45-cm TL) flathead catfish. Predator-naïve juveniles (20- to 25-cm TL) exhibited no discernable preference when provided areas with and without (52 percent and 48 percent, n = 16 observations; 46 percent and 54 percent, n = 20 observations) large flathead catfish. However, once predation occurred, use of predator-free areas nearly doubled in two trials (36 percent and 64 percent, n = 50 observations; 33 percent and 67 percent, n = 12 observations). A more stringent test examining available area indicated predator-savvy razorback suckers used predator-free areas (88 percent, n = 21) illustrating predator avoidance was a learned behavior.

  8. Preliminary design of mesoscale turbocompressor and rotordynamics tests of rotor bearing system

    Science.gov (United States)

    Hossain, Md Saddam

    2011-12-01

    A mesoscale turbocompressor spinning above 500,000 RPM is evolutionary technology for micro turbochargers, turbo blowers, turbo compressors, micro-gas turbines, auxiliary power units, etc for automotive, aerospace, and fuel cell industries. Objectives of this work are: (1) to evaluate different air foil bearings designed for the intended applications, and (2) to design & perform CFD analysis of a micro-compressor. CFD analysis of shrouded 3-D micro compressor was conducted using Ansys Bladegen as blade generation tool, ICEM CFD as mesh generation tool, and CFX as main solver for different design and off design cases and also for different number of blades. Comprehensive experimental facilities for testing the turbocompressor system have been also designed and proposed for future work.

  9. Some Preliminary Notes on an Empirical Test of Freud’s Theory on Depression

    Directory of Open Access Journals (Sweden)

    Mattias eDesmet

    2013-05-01

    Full Text Available A review of the literature indicates that empirical researchers have difficulty translating Freud’s theory on depression into appropriate research questions and hypotheses. In their attempt to do so, the level of complexity in Freud’s work is often lost. As a result, what is empirically tested is no more than a caricature of the original theory. To help researchers avoid such problems, this study presents a conceptual analysis of Freud’s theory of depression as it is presented in Mourning and Melancholia (Freud, 1917. In analyzing Freud’s theory on the etiology of depression, it is essential to differentiate between (1 an identification with the satisfying and frustrating aspects of the love object, (2 the inter- and an intrapersonal loss of the love object, and (3 conscious and unconscious dynamics. A schematic representation of the mechanism of depression is put forward and a research design by which this schema can be empirically investigated is outlined.

  10. Preliminary indications for antibiotic susceptibility tests in less than six hour in positive blood cultures

    Directory of Open Access Journals (Sweden)

    Vesselina Kroumova

    2010-03-01

    Full Text Available A rapid determination of the antibiotic susceptibility patterns of pathogens responsible for sepsis represents a significant milestone for a timely correct antibiotic therapy.The system HB&L® (ALIFAX allows reduced time in the detection of bacterial growth and consequently is able to detect the growth or absence of certain microorganisms in the presence of a given antibiotic. In this study three system for rapid antibiotic susceptibility tests among bacteria isolated from blood were compared: HB&L® (ALIFAX,VITEK®2 (bioMérieux and essays Etest® (bioMérieux. Present findings indicate that HB&L® (ALIFAX is rapid reliable instrument that may support the clinician for a rapid and appropriate treatment, particularly in the critical patient.

  11. [Preliminary application of video head impulse test in the diagnosis of vertigo].

    Science.gov (United States)

    Zhang, Yanmei; Chen, Siqi; Zhong, Zhen; Chen, Li; Wu, Yuanding; Zhao, Guiping; Liu, Yuhe

    2015-06-01

    To investigate clinical application of head impulse test with video recording eye movements in the diagnosis of vertigo. The video head impulse test(vHIT) was used to measure the eye saccades and velocity gain in 95 patients with vertigo which were divided into two groups, peripheral vertigo (47 cases) and central vertigo(48 cases); the characteristics of eye saccades and velocity gain of six semicircular canals in different patients with vertigo were analyzed, and were compared between the two groups. The vHIT result in patients with peripheral vertigo: in 22 patients (23 affected ears) with Meniere's disease, 21 ears were abnormal (91. 3%); the vHIT results in 4 patients with vestibular schwannoma, 2 patients with vestibular neuritis, 5 patients with delayed endolymphatic hydrops, 6 patients with sudden hearing loss accompanied vertigo, and 8 patients with vestibular dysfunction, were abnormal with correct saccades and/or lower velocity gain of vHIT. The abnormal vHIT results were also found in 35 of 48 patients (72. 9%) with central vertigo, which including posterior cerebral circulation ischemia(7 patients), cerebral infarction/stroke(6 patients), and dizziness with vertigo(17 patients) and others(18 patients). Abnormal rate of vHIT in patients with peripheral vertigo was 95. 7% (45/47), which was significantly higher than that (72. 9%) in patients with central vertigo. It is easy to perform the vHIT which without adverse reactions. We can record high-frequency characteristics of vestibular-ocular reflex among six semicircular canals through vHIT. The vHIT results which show the function of vestibular ocular reflex in different diseases with vertigo, can help discriminate peripheral vertigo from central vertigo, and it is a practical assessment method for vertigo.

  12. [Development of external quality control protocol for CyberKnife beams dosimetry: preliminary tests multicentre].

    Science.gov (United States)

    Guinement, L; Marchesi, V; Veres, A; Lacornerie, T; Buchheit, I; Peiffert, D

    2013-01-01

    To develop an external quality control procedure for CyberKnife(®) beams. This work conducted in Nancy, has included a test protocol initially drawn by the medical physicist of Nancy and Lille in collaboration with Equal-Estro Laboratory. A head and neck anthropomorphic phantom and a water-equivalent homogeneous cubic plastic test-object, so-called "MiniCube", have been used. Powder and solid thermoluminescent dosimeters as well as radiochromic films have been used to perform absolute and relative dose studies, respectively. The comparison between doses calculated by Multiplan treatment planning system and measured doses have been studied in absolute dose. The dose distributions measured with films and treatment planning system calculations have been compared via the gamma function, configured with different tolerance criteria. This work allowed, via solid thermoluminescent dosimeter measurements, verifying the beam reliability with a reproducibility of 1.7 %. The absolute dose measured in the phantom irradiated by the seven participating centres has shown an error inferior to the standard tolerance limits (± 5 %), for most of participating centres. The relative dose measurements performed at Nancy and by the Equal-Estro laboratory allowed defining the most adequate parameters for gamma index (5 %/2mm--with at least 95 % of pixels satisfying acceptability criteria: γsoftware. This work allowed defining a dosimetric external quality control for CyberKnife(®) systems, based on a reproducible irradiation plan through measurements performed with thermoluminescent dosimeters and radiochromic films. This protocol should be validated by a new series of measurement and taking into account the lessons of this work. Copyright © 2013 Société française de radiothérapie oncologique (SFRO). Published by Elsevier SAS. All rights reserved.

  13. Progeny test of tetraploid Betula platyphylla and preliminary selection of hybrid parents

    Institute of Scientific and Technical Information of China (English)

    Huanwen Xu; Yu Liu; Jing Jiang; Guifeng Liu; Xiyang Zhao

    2016-01-01

    Estimating genetic parameters of parental lines through progeny testing and choosing good hybrid parents are important for genetically improving seed orchard trees. In this study, 24 tetraploid progeny seedlings were used as experimental materials, which came from test cross design:six tetraploid Betula platyphylla lines (Q33, Q13, Q103, Q19, Q83 and Q14) as female parents and four individual B. platyphylla diploid lines (F3, F4, F9 and F11) as male parents were crossed. Variance analysis of height, diame-ter, height-to-diameter ratio, and internodal distance showed that the differences between hybrid combinations reached highly significant levels. Using multi-objective decisionmaking, we performed a comprehensive assess-ment of the various hybrid combinations. Using a selection rate of 20% of the standard, five hybrids were selected;their genetic gains in average height, diameter, height-to-diameter ratio, and internodal distance were 20.95, 6.07, 13.07 and 8.96%, respectively. We also analyzed the combining ability and genetic parameter effect values of parents and hybrid combinations. The combined analysis revealed that Q13, Q103, Q33 and Q83 were superior females; F3, F4, and F9 were superior males; and F3 9 Q13, F4 9 Q83 and F9 9 Q33 were superior hybrid combinations. The heights and diameters of these proge-nies were 22.49 and 11.48% greater than average, respectively.

  14. Preliminary Correlation Map of Geomorphic Surfaces in North-Central Frenchman Flat, Nevada Test Site

    Energy Technology Data Exchange (ETDEWEB)

    Bechtel Nevada

    2005-08-01

    This correlation map (scale = 1:12,000) presents the results of a mapping initiative that was part of the comprehensive site characterization required to operate the Area 5 Radioactive Waste Management Site, a low-level radioactive waste disposal facility located in northern Frenchman Flat at the Nevada Test Site. Eight primary map units are recognized for Quaternary surfaces: remnants of six alluvial fan or terrace surfaces, one unit that includes colluvial aprons associated with hill slopes, and one unit for anthropogenically disturbed surfaces. This surficial geology map provides fundamental data on natural processes for reconstruction of the Quaternary history of northern Frenchman Flat, which in turn will aid in the understanding of the natural processes that act to develop the landscape, and the time-frames involved in landscape development. The mapping was conducted using color and color-infrared aerial photographs and field verification of map unit composition and boundaries. Criteria for defining the map unit composition of geomorphic surface units are based on relative geomorphic position, landform morphology, and degree of preservation of surface morphology. The bedrock units identified on this map were derived from previous published mapping efforts and are included for completeness.

  15. Preliminary operational results of the low-temperature solar industrial process heat field tests

    Energy Technology Data Exchange (ETDEWEB)

    Kutscher, C.F.; Davenport, R.L.

    1980-06-01

    Six solar industrial process heat field tests have been in operation for a year or more - three are hot water systems and three are hot air systems. All are low-temperature projects (process heat at temperatures below 212/sup 0/F). Performance results gathered by each contractor's data acquisition system are presented and project costs and problems encountered are summarized. Flat-plate, evacuated-tube, and line-focus collectors are all represented in the program, with collector array areas ranging from 2500 to 21,000 ft/sup 2/. Collector array efficiencies ranged from 12% to 36% with net system efficiencies from 8% to 33%. Low efficiencies are attributable in some cases to high thermal losses and, for the two projects using air collectors, are due in part to high parasitic power consumption. Problems have included industrial effluents on collectors, glazing and absorber surface failures, excessive thermal losses, freezing and overheating, control problems, and data acquisition system failure. With design and data acquisition costs excluded costs of the projects ranged from $25/ft/sup 2/ to $87/ft/sup 2/ and $499/(MBtu/yr) to $1537/(MBtu/yr).

  16. Preliminary photovoltaic arc-fault prognostic tests using sacrificial fiber optic cabling.

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Jay Dean; Blemel, Kenneth D.; Peter, Francis

    2013-02-01

    Through the New Mexico Small Business Assistance Program, Sandia National Laboratories worked with Sentient Business Systems, Inc. to develop and test a novel photovoltaic (PV) arc-fault detection system. The system operates by pairing translucent polymeric fiber optic sensors with electrical circuitry so that any external abrasion to the system or internal heating causes the fiber optic connection to fail or detectably degrade. A periodic pulse of light is sent through the optical path using a transmitter-receiver pair. If the receiver does not detect the pulse, an alarm is sounded and the PV system can be de-energized. This technology has the unique ability to prognostically determine impending failures to the electrical system in two ways: (a) the optical connection is severed prior to physical abrasion or cutting of PV DC electrical conductors, and (b) the polymeric fiber optic cable melts via Joule heating before an arc-fault is established through corrosion. Three arc-faults were created in different configurations found in PV systems with the integrated fiber optic system to determine the feasibility of the technology. In each case, the fiber optic cable was broken and the system annunciated the fault.

  17. The physical education predisposition scale: Preliminary tests of reliability and validity in Australian students.

    Science.gov (United States)

    Hilland, Toni A; Brown, Trent D; Fairclough, Stuart J

    2017-03-30

    The main aim of this study was to psychometrically test the Physical Education Predisposition Scale (PEPS) with a cohort of Australian students, to assess secondary school students' perceived PE ability and PE worth. Secondary aims were to explore how the two variables were related and to investigate age and gender differences. Altogether, 266 Year 7, 8, 9 and 10 students (aged 12-16 years), from four schools within the South Eastern region of Melbourne, completed the PEPS at both time points. Principal components analysis revealed the presence of a simple two-factor structure explaining 66.9% of the variance. Factor 1 (labelled perceived PE worth) reflected enjoyment and attitude (α = .91), and factor 2 (labelled perceived PE ability) represented perceptions of competence and self-efficacy (α = .92). Significant positive correlations were observed between the two factors (r = .50-.82, P < .001). Boys scored significantly higher than girls on perceived PE ability (P = .01), and year 7 students scored significantly higher compared to Year 9 students (P = .002). Our results support the potential of the PEPS as a concise measurement tool for use in the PE setting, for both teachers and researchers.

  18. ANALYSIS OF THE FORCE DURING OVERCOMING THE ROADBLOCK – THE PRELIMINARY EXPERIMENTAL TESTS

    Directory of Open Access Journals (Sweden)

    Jakub POLASIK

    2016-03-01

    Full Text Available The paper applies to the issue of preservation of passenger vehicles during overcoming the roadblocks on a dry asphalt surface with the constant speed. The study aimed to estimate the forces which are affecting the suspension of the vehicle during the contact between a tyre and roadblock. Using the video recording it is possible to calculate the values of the tyre deflection and forces acting in the system. The obtained deflections of the tyres were compared to earlier laboratory test results and load-deflection characteristics of the tyres with the same size. The roadblock with the defined geometry causes a dynamic deflection of the tyre. During the study a significant change in the geometry of the suspension has not occurred. The paper presents the characteristics of the vehicles research with a particular regard to model and type of tyres. The determination of the exact dimensions of the roadblocks and application of the ADIS 16385 system for acquisition and archiving the features of the kinematic motion of the vehicle allowed to determine the speed at the moment of collision with the roadblock.

  19. Medical chilling device designed for hypothermic hydration graft storage system: Design, thermohydrodynamic modeling, and preliminary testing

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Jung Hwan [Hongik University, Seoul (Korea, Republic of)

    2015-02-15

    Hypothermic hydration graft storage is essential to reduce the metabolic demand of cells in vitro. The alleviated metabolic demands reduce the emergence rate of anaerobic metabolism generating adenosine triphosphate (ATP) energy that creates free radicals. The cessive free radicals can damage cells and tissues due to their highly oxidative power with molecules. Current cooling systems such as a conventional air cooling system and an ice pack system are inappropriate for chilling cell tissues in vitro because of inconvenience in use and inconsistent temperature sustainability caused by large size and progressive melting, respectively. Here, we develop a medical chilling device (MCD) for hypothermic hydration graft storage based on thermo-hydrodynamic modeling and thermal electric cooling technology. Our analysis of obtained hydrodynamic thermal behavior of the MCD revealed that the hypothermic condition of 4 .deg. C was continuously maintained, which increased the survival rates of cells in vitro test by reduced free radicals. The validated performance of the MCD promises future development of an optimal hypothermic hydration graft storage system designed for clinical use.

  20. The Dichotic Word Listening Test: preliminary observations in American and Canadian samples.

    Science.gov (United States)

    Roberts, M A; Persinger, M A; Grote, C; Evertowski, L M; Springer, J A; Tuten, T; Moulden, D; Franzen, K M; Roberts, R J; Baglio, C S

    1994-11-01

    The present article describes observations of 670 American and Canadian child and adult control subjects on the recently developed Dichotic Word Listening Test (DWLT). The task was also administered to a sample of American children with traumatic brain injuries (n=21) of varying severity and a sample of American adults with mild traumatic injuries (n=36). The conceptual focus in this line of research was on using normative observations to identify clinically defective channels of auditory processing among patients. The principal findings were as follow: 1) the DWLT was sensitive to the effects of cerebral dysfunction following traumatic brain injury; 2) differences among normal samples with different demographic backgrounds were frequently observed, arguing for the development of local norms; 3) a shorter form of the DWLT task (DWLT30) can be used for screening purposes with relatively little reduction in sensitivity to cerebral dysfunction; 4) there appeared to be considerable improvement of DWLT performance between the ages of five and seven, due largely to higher scores from the left auditory channel; and 5) there were indications that use of French (rather than English) as one's native language before age six can negatively influence performance in adulthood on an English version of the DWLT. In general, the present findings suggest that the DWLT is likely to have relatively broad applicability for neuropsychological assessment across the life-span.

  1. User attitudes in analyzing digital slides in a quality control test bed: a preliminary study.

    Science.gov (United States)

    Della Mea, Vincenzo; Demichelis, Francesca; Viel, Federico; Dalla Palma, Paolo; Beltrami, Carlo Alberto

    2006-05-01

    The pathologist examines suitably stained glass slides through a bright field microscope in order to render histopathological or cytological diagnosis by looking at tissues and cells. Glass slides serve as a permanent record of the patient disease. Over the course of a patient's treatment slides may need to be reviewed at other institutions before treatment can commence. Due to their fragile nature a transportable permanent digital facsimile of the glass slide would be ideal. A digital slide is a set of digital images representing the whole slide normally used by the pathologist, or a significant part of it; it is usually made by a large amount of images, up to thousands, which makes its management difficult. The present paper provides a description of the requirements needed to reproduce glass slides and of the available technological equipment, then the features of the two systems we implemented on different hardware are described, together with those of the digital slide viewer. The viewer was evaluated in two experimental test phases, during which user behaviour and diagnostic reports were measured. Digital slides used in the two experiments were acquired with either system. Possible applications of digital slides are then discussed, including undergraduate and professional education, quality control, and image analysis on full samples as well as on tissue microarrays.

  2. Preliminary testing of a compact bone-attached robot for otologic surgery

    Science.gov (United States)

    Dillon, Neal P.; Balachandran, Ramya; Motte dit Falisse, Antoine; Wanna, George B.; Labadie, Robert F.; Withrow, Thomas J.; Fitzpatrick, J. Michael; Webster, Robert J.

    2014-03-01

    Otologic surgery often involves a mastoidectomy procedure, in which part of the temporal bone is milled away in order to visualize critical structures embedded in the bone and safely access the middle and inner ear. We propose to automate this portion of the surgery using a compact, bone-attached milling robot. A high level of accuracy is required t o avoid damage to vital anatomy along the surgical path, most notably the facial nerve, making this procedure well-suited for robotic intervention. In this study, several of the design considerations are discussed and a robot design and prototype are presented. The prototype is a 4 degrees-of-freedom robot similar to a four-axis milling machine that mounts to the patient's skull. A positioning frame, containing fiducial markers and attachment points for the robot, is rigidly attached to the skull of the patient, and a CT scan is acquired. The target bone volume is manually segmented in the CT by the surgeon and automatically converted to a milling path and robot trajectory. The robot is then attached to the positioning frame and is used to drill the desired volume. The accuracy of the entire system (image processing, planning, robot) was evaluated at several critical locations within or near the target bone volume with a mean free space accuracy result of 0.50 mm or less at all points. A milling test in a phantom material was then performed to evaluate the surgical workflow. The resulting milled volume did not violate any critical structures.

  3. Partial Nucleate Pool Boiling at Low Heat Flux: Preliminary Ground Test for SOBER-SJ10

    Science.gov (United States)

    Wu, Ke; Li, Zhen-Dong; Zhao, Jian-Fu; Li, Hui-Xiong; Li, Kai

    2016-05-01

    Focusing on partial nucleate pool boiling at low heat flux, SOBER-SJ10, one of 27 experiments of the program SJ-10, has been proposed to study local convection and heat transfer around an isolated growing vapor bubble during nucleate pool boiling on a well characterized flat surface in microgravity. An integrated micro heater has been developed. By using a local pulse overheating method in the experimental mode of single bubble boiling, a bubble nucleus can be excited with accurate spatial and temporal positioning on the top-side of a quartz glass substrate with a thickness of 2 mm and an effective heating area of 4.5 mm in diameter, and then grows under an approximate constant heat input provided by the main heater on the back-side of the substrate. Ten thin film micro-RTDs are used for local temperature measurements on the heating surface underneath the growing bubble. Normal pool boiling experiments can also be carried out with step-by-step increase of heating voltage. A series of ground test of the flight module of SOBER-SJ10 have been conducted. Good agreement of the measured data of single phase natural convection with the common-used empirical correlation warrants reasonable confidence in the data. It is found that the values of the incipience superheat of pool boiling at different subcooling are consistent with each others, verifying that the influence of subcooling on boiling incipience can be neglected. Pool boiling curves are also obtained, which shows great influence of subcooling on heat transfer of partial nucleate pool boiling, particularly in lower heat flux.

  4. Brazilian Portuguese adaptation of Dyslexia Early Screening Test - Second edition: preliminary findings.

    Science.gov (United States)

    Matta, Tatiana Ribeiro Gomes da; Befi-Lopes, Debora Maria

    2015-01-01

    The assessment of language skills in early childhood can provide important information about the future of literacy and academic performances. Children with reading difficulties should be identified early in their education, before they suffer from shortcomings and experience failures and feel discouraged at school. Considering the importance of early identification of language disorders and the shortage of standardized instruments for the Brazilian scenario, the overall objective of this study was to translate and adapt the Dyslexia Early Screening Test - Second Edition (DEST-2) to, subsequently, verify its applicability and efficacy in preschoolers who had Brazilian Portuguese as their native language. The study was composed of 20 children of both genders, regularly enrolled in a public school in the metropolitan region of São Paulo, none had any complaints related to learning and no indicators of sensory, neurological, cognitive, or behavioral disorders. It was observed that there was no need for significant changes to the original structure of the DEST-2 or in their administration instructions format. The performance of the children in the translated and in the national exams that were used as a benchmark was compatible, suggesting that the adjustments made met the equivalences needed to utilize this instrument with Brazilian children. A randomized study that will complement the preliminarily data obtained is in progress. Taking into consideration the linguistic and cultural diversity of Brazil, it is imperative that the translated version of the DEST-2 can be applied on a large scale and in several states of the country, in order to allow the use of this instrument as a language assessment tool in Brazil.

  5. Balance impairment in people with multiple sclerosis: preliminary evidence for the Balance Evaluation Systems Test.

    Science.gov (United States)

    Jacobs, Jesse V; Kasser, Susan L

    2012-07-01

    This study examined the validity of the Balance Evaluation Systems Test (BESTest) to identify balance impairments in people with multiple sclerosis (MS) by evaluating differences in BESTest performance between people with and without MS. We also assessed the BESTest's validity by correlation with objective measures of postural performance as well as with disease severity and fall status. Thirteen subjects with MS (Expanded Disability Status Scale; EDSS: 0-4.5) and 13 matched subjects without MS were evaluated on the BESTest, asked about fall history, and assessed by force plates and motion capture as they performed laboratory tasks of step initiation, forward leaning to the limits of stability, and postural responses to rotations of the support surface. Compared to subjects without MS, subjects with MS exhibited lower total BESTest scores (mean (95%) score for subjects with MS=91 (83-99); subjects without MS=105 (104-107)) as well as section scores pertaining to mechanical constraints, limits of stability, anticipatory postural adjustments, and gait. BESTest scores significantly correlated with objective laboratory measures of step velocity during step initiation (Pearson r(2)=0.48, P<0.01) as well as center-of-pressure displacements during both the leaning (Pearson r(2)=0.55, P<0.005) and postural-response tasks (Pearson r(2)=0.76, P<0.0001). BESTest total scores were 92% accurate to identify fallers and non-fallers, and BESTest scores significantly correlated with EDSS scores (Spearman's rho=0.85, P<0.0005). Thus, the BESTest provides a valid clinical assessment of balance impairments in people with MS.

  6. Preliminary tests for Salix sp. tolerance to heavy metals (Cd, Ni, Pb)

    Science.gov (United States)

    Corneanu, Mihaela; Hernea, Cornelia; Butnariu, Monica; Corneanu, Gabriel; Sărac, Ioan; Hollerbach, Wilhelm; Neţoiu, Constantin; Petcov, Andreea Adriana

    2014-05-01

    The species of Salix genus constitute potential sources of germplasm in the prevention of the environment degradation, and offer remedy for about two third from the all degradation types. The majority of the willow species, present a good adaptation to hypoxic conditions, feature which suggest that they manifest a preference for mineral nutrition in comparison with organic one. Thus, many of willow species can be developed on soils with a big amount of minerals and/or radionuclides, being both phytoremediatory species, as well as pioneer ones, contributing to the restoration of soil. Thus, the willow species, posses the capacity for development in degraded areas, natural or anthropic, as swamps, abandoning crops areas, sandy dune, riparian sandy areas, gravels, a.o. In this paper are present some laboratory comparative tests of heavy metals tolerance on four Salix sp. genotypes: clone 202 (Salix alba), hybrid 892 (Salix alba), Inger (Salix viminalis) and Gudrun (Salix viminalis). The genotypes of Salix alba are native from Romania, produced in the Forest Research and Management Institute Bucharest, while the genotypes of Salix viminalis are native from Sweden, but the plant material was produced under license in Romania by REBINA Agrar SRL. As plant material were used one-year-old cuttings (5-10 cm long), with 2-6 buds each. Per genotype, per heavy metal and each of three concentration five replication were used. There were ten experimental variants for each genotype: three concentrations for each of the heavy metals; concentrations selected, in the accordance SR ISO 11269-2/March 1999 and Control (tap water). The cuttings were maintained in metalic solutions for 15 days. In the days 7th and 15th, were performed biometrical observations on: the roots number and length, the shoots number and length, the leaves number/shoot, viability of the shoots. At the end of the experiment the content in heavy metals was determined in roots and shoots (by atomic absorption

  7. Speech and pause characteristics in multiple sclerosis: A preliminary study of speakers with high and low neuropsychological test performance

    Science.gov (United States)

    FEENAUGHTY, LYNDA; TJADEN, KRIS; BENEDICT, RALPH H.B.; WEINSTOCK-GUTTMAN, BIANCA

    2017-01-01

    This preliminary study investigated how cognitive-linguistic status in multiple sclerosis (MS) is reflected in two speech tasks (i.e. oral reading, narrative) that differ in cognitive-linguistic demand. Twenty individuals with MS were selected to comprise High and Low performance groups based on clinical tests of executive function and information processing speed and efficiency. Ten healthy controls were included for comparison. Speech samples were audio-recorded and measures of global speech timing were obtained. Results indicated predicted differences in global speech timing (i.e. speech rate and pause characteristics) for speech tasks differing in cognitive-linguistic demand, but the magnitude of these task-related differences was similar for all speaker groups. Findings suggest that assumptions concerning the cognitive-linguistic demands of reading aloud as compared to spontaneous speech may need to be re-considered for individuals with cognitive impairment. Qualitative trends suggest that additional studies investigating the association between cognitive-linguistic and speech motor variables in MS are warranted. PMID:23294227

  8. A new airborne Polar Nephelometer for the measurement of optical and microphysical cloud properties. Part II: Preliminary tests

    Directory of Open Access Journals (Sweden)

    O. Crépel

    Full Text Available A new optical sensor, the airborne Polar Nephelometer, has been tested in an open wind tunnel. The wind tunnel was operated in cloudy conditions including either cloud water droplets or ice crystals, or a mixture of these particles. The sensor is designed to measure the optical and microphysical parameters of cloud particles sized from a few micrometers to about 500 µm diameter. Basically, the probe measures the scattering phase function of an ensemble of cloud particles which intersect a collimated laser beam near the focal point of a paraboloidal mirror. From the measured scattering phase function the retrieval of the droplet-size spectra and subsequent derived quantities such as liquid water content and size parameters can be calculated using an inversion method. The particle phase discrimination (water droplets/ice particles can be derived from the shape of the scattering phase function and the sensitivity of the probe allows the detection of small ice crystals (typically of 5 µm diameter. The paper describes the preliminary results obtained by the prototype version of the Polar Nephelometer in various cloudy conditions. These results are compared with direct microphysical measurements obtained by usual PMS probes also mounted in the wind tunnel. Complementary results obtained in a cold chamber are presented in order to illustrate the reliability of the Polar Nephelometer in the presence of small ice crystals.

  9. Performance characteristics of selected immunoassays for preliminary test of 3,4-methylenedioxymethamphetamine, methamphetamine, and related drugs in urine specimens.

    Science.gov (United States)

    Hsu, Jui; Liu, Chiareiy; Liu, C P; Tsay, Wen-Ing; Li, Jih-Heng; Lin, Dong-Liang; Liu, Ray H

    2003-10-01

    Eight commercially available immunoassays for amphetamines (DRI Amphetamines, CEDIA DAU Amphetamines-Semiquantitative, EMIT d.a.u. Monoclonal Amphetamine/Methamphetamine, Synchron CX Systems AMPH, TDx/TDxFLx Amphetamine/Methamphetamine II, CEDIA Amphetamines/Ecstasy, COBAS INTEGRA Amphetamines, and Abuscreen((R)) OnLine HS Amphetamine/MDMA) are evaluated for their effectiveness in serving as the preliminary test methodology for the analysis of 3,4-methylenedioxymethamphetamine/3,4-methylenedioxyamphetamine (MDMA/MDA) and methamphetamine/amphetamine (MA/AM). Standard solutions (in urine matrix) of MDMA, MDA, MA, and AM are used to determine these immunoassays' reactivities (or cross-reactivities) toward these compounds of interest. Case specimens containing MDMA/MDA and MA/AM are also used to study the correlations of the apparent immunoassay MDMA (or MA) concentrations and the gas chromatographic-mass spectrometric concentrations of these compounds. Data resulting from this study suggest that CEDIA Amphetamines/Ecstasy can best predict the concentrations of MDMA and MA in case specimens and can also detect the presence of MDMA at low levels, whereas Abuscreen OnLine HS Amphetamine/MDMA can detect both MDMA and MA at low concentrations.

  10. Preliminary Testing of a Patient-Reported Outcome Measure for Recurrent or Metastatic Head and Neck Cancer.

    Science.gov (United States)

    Jackson, Leanne K; Deng, Jie; Ridner, Sheila H; Gilbert, Jill; Dietrich, Mary S; Murphy, Barbara A

    2016-05-01

    We describe development and preliminary testing of Vanderbilt Head and Neck Symptom Survey-Recurrent/Metastatic (VHNSS-RM) to assess residual symptoms, tumor-related symptoms, and side effects from therapy. Items were identified through patient and provider interviews. Card sort selected high-yield and high-impact items. The VHNSS-RM was administered to 50 patients with recurrent/metastatic head and neck cancer (RMHNC). The VHNSS-RM includes 12 unique symptoms (diet change, tongue movement affecting speech/swallowing, face/neck swelling, neck/jaw cramping, bad breath, drooling, wound drainage/pain/odor, nasal congestion/drainage, eyes watering, face/tongue/ear/scalp numbness, headaches, and confusion) and 7 unique psychosocial issues (burden to family/friends, lost independence, fear, embarrassment, mood swings, stress, and boredom). The VHNSS-RM contains 35 physical and 12 psychosocial issues. The VHNSS-RM is feasible and not overly burdensome. Nineteen unique items may improve palliation to patients with RMHNC. © The Author(s) 2015.

  11. A Preliminary Test of the Interpersonal-Psychological Theory of Suicide in Women Seeking Shelter From Intimate Partner Violence.

    Science.gov (United States)

    Wolford-Clevenger, Caitlin; Smith, Phillip N; Kuhlman, Shane; D'Amato, Darcey

    2016-07-25

    Women seeking shelter from intimate partner violence (IPV) are at greater risk of suicide ideation and attempts compared with women in the general population. A theoretically grounded understanding of suicide risk in shelter-seeking women is critical to improve assessment and management of suicide risk in this population. The interpersonal-psychological theory of suicide (IPTS) proposes that suicide ideation results from hopelessness about thwarted belongingness and perceived burdensomeness. However, suicide ideation does not progress to death by suicide unless one has acquired the capability for suicide (i.e., pain tolerance and fearlessness about death) via repeated exposure to painful and fearsome events. The present study provides a preliminary test of the IPTS in a sample of 134 women seeking shelter from IPV. First, we examined factors theoretically related to suicide ideation, demonstrating that only at high levels of hopelessness was perceived burdensomeness associated with suicide ideation. The study also examined factors theoretically related to the acquired capability for suicide (ACS), indicating that physical partner violence perpetration was associated with ACS. These findings suggest that perceived burdensomeness, particularly in the context of increased hopelessness, is important in the assessment and treatment of suicide ideation. Furthermore, violence perpetration may indicate greater risk of the capability to die by suicide among women seeking shelter from IPV. © The Author(s) 2016.

  12. Preliminary PINC(Program for the Inspection of Nickel Alloy Components) RRT(Round Robin Test) - Pressurizer Dissimilar Metal Weld

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kyung Cho; Kang, Sung Sik; Shin, Ho Sang; Chung, Ku Kab; Song, Myung Ho; Chung, Hae Dong [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2009-06-15

    After several damages by PWSCC were found in the world, USNRC and PNNL(Pacific Northwest National Laboratory) started the research on PWSCC under the project name of PINC. The aim of the project was 1) to fabricate representative NDE mock-ups with flaws to simulate PWSCCs, 2) to identify and quantitatively assess NDE methods for accurately detecting, sizing and characterizing PWSCCs, 3) to document the range of locations and morphologies of PWSCCs and 4) to incorporate results with other results of ongoing PWSCC research programs, as appropriate. Korea nuclear industries have also been participating in the project. Thermally and mechanically cracked-four mockups were prepared and phased array and manual ultrasonic testing(UT) techniques were applied. The results and lessons learned from the preliminary RRT are summarized as follows: 1) Korea RRT teams performed the RRT successfully. 2) Crack detection probability of the participating organizations was an average 87%, 80% and 80% respectively. 3) RMS error of the crack sizing showed comparatively good results. 4) The lessons learned may be helpful to perform the PINC RRT and PSI /ISI in Korea in the future.

  13. Buckling Test Results and Preliminary Test and Analysis Correlation from the 8-Foot-Diameter Orthogrid-Stiffened Cylinder Test Article TA02

    Science.gov (United States)

    Hilburger, Mark W.; Waters, W. Allen, Jr.; Haynie, Waddy T.; Thornburgh, Robert P

    2017-01-01

    Results from the testing of cylinder test article SBKF-P2-CYL-TA02 (referred to herein as TA02) are presented. TA02 is an 8-foot-diameter (96-inches), 78.0-inch-long, aluminum-lithium (Al-Li), orthogrid-stiffened cylindrical shell similar to those used in current state-of-the-art launch-vehicle structures and was designed to exhibit global buckling when subjected to combined compression and bending loads. The testing was conducted at the Marshall Space Flight Center (MSFC), February 3-6, 2009, in support of the Shell Buckling Knockdown Factor Project (SBKF). The test was used to verify the performance of a newly constructed buckling test facility at MSFC and to verify the test article design and analysis approach used by the SBKF researchers.

  14. Preliminary tests in skull pediatric phantom for dosimetry in computerized tomography; Testes preliminares em um simulador pediatrico de cranio para dosimetria em tomografia computadorizada

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Elaine Wirney; Potiens, Maria da Penha de A., E-mail: elainewirney@uso.br, E-mail: mppalbu@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2014-07-01

    Computed tomography (CT) is one of the techniques in the field of radiology with striking technological advance in recent years. One reason for this was the increased number of channels associated with the increased power of the X-ray tube. These conditions allowed the equipment high speed in the acquisition of the cuts, reducing the patient exposure time essential characteristic for the increase of its use in pediatric patients. In this context, were developed a new pediatric skull simulator to analyze the results of measurements performed in laboratory and clinic beams with the objective of creation and use of diagnostic reference levels observing risks stochastic effects and assessing the reduction of absorbed doses in patients undergoing growing. Preliminary tests performed in clinical beams showed C{sub w} values: 2.525 ± 0.212 mGy for the developed simulator quoted and 3.362 ± 0.282 mGy for a simulator developed by IPEN called standard, both being between uncertainty values of 8.4% and 14.4% suggested by TRS number 457.

  15. Theoretical analyses and numerical simulations of the torsional mode for two acoustic viscometers with preliminary experimental tests.

    Science.gov (United States)

    Ai, Yuhui; Lange, Rebecca A

    2008-03-01

    A rigorous analysis of the torsional modes in both a cylindrical wave guide and the associated static viscous fluid field has been conducted from the solid and the fluid wave equations and the coupled boundary conditions. As a result, two acoustic viscometer models, along with four independent equations connecting the density and the viscosity of the fluid with the attenuation and the phase velocity of the torsional wave in the wave guide, have been developed. The analysis shows that the product of the viscosity and the density of the fluid can be measured from the end reflection coefficient of the torsional wave in the wave guide and that both the viscosity and the density can be determined simultaneously from either the phase velocity or the attenuation of the torsional wave in a single cylindrical wave guide. For the simultaneous measurements of the viscosity and the density, the independent equations have to be solved numerically, for example, using Matlab (The MathWorks, Natick, MA), given either the attenuation or the phase velocity in the wave guide that is surrounded by the fluid. To demonstrate the technical feasibility, numerical simulations have been conducted to discern viscosity, phase velocity, and density, all versus attenuation, at different frequencies, and with variable dimension of a molybdenum rod, so that both the advantages and the disadvantages of the simultaneous measurements can be explored. In the end, to test the two models, preliminary experiments on two viscous standards were conducted at 23 degrees C, and good agreements have been achieved between the viscosities measured from both models and for both standards.

  16. Preliminary data for northern Great Plains test well 1, quarter NE quarter Sec. 11, T.55N., R.77W., Sheridan County, Wyoming

    Science.gov (United States)

    Lobmeyer, D.H.; Anna, L.O.; Busby, J.F.

    1982-01-01

    This report documents the preliminary data obtained from Northern Great Plains test well 1 and describes the preliminary results and future testing plans. The intended audience includes hydrologists, local water users, drilling contractors, and water managers. The test well was drilled as part of the study to determine the water resource potential of the regional aquifer system in the Northern Great Plains, an area of about 250,000 sq mi. The well is 4,485 ft deep; nine cores were drilled totaling 182 ft; 157.42 ft of core were recovered. Sidewall cores were obtained from 24 horizons. Gamma and density scans of the cores were made, and selected parts were tested for density, porosity, and vertical and horizontal permeability. Eight zones were perforated and tested using conventional drill-stem tests and swabbing. Water samples were obtained from seven zones. No major potential sources of groundwater were penetrated by the test well. Estimated yields from selected zones range from about 240 gal/min with 400 ft of drawdown to about 5 gal/min flow at the surface. Dissolved-solids concentrations ranged from about 1,800 to 3,000 mg/l. (USGS)

  17. Preliminary Derivation of Test Item Clusters for Predicting Injuries, Poor Physical Performance, and Overall Attrition in Basic Combat Training

    Science.gov (United States)

    2006-12-01

    examination and patient self-report measures for cervical radiculopathy. Spine. Jan 1 2003;28(1):52-62. 36 11. Wainner RS, Fritz JM, Irrgang JJ...foot orthosis use and modified activity: a preliminary investigation. Phys Ther. Jan 2004;84(1):49-61. 18. Solomon DH, Avorn J, Warsi A, et al

  18. Preliminary experimental results using the thermal-hydraulic integral test facility (VISTA) for the pilot plant of the system integrated modular advanced reactor, SMART-P

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Ki Yong; Pak, Hyun Sik; Cho, Seok; Pak, Choon Kyung; Lee, Sung Jae; Song, Chul Hwa; Chung, Moon Ki [KAERI, Taejon (Korea, Republic of)

    2003-07-01

    Preliminary experimental tests were carried out using the thermal-hydraulic integral test facility, VISTA (Experimental Verification by Integral Simulation of Transients and Accidents), which has been constructed to simulate the SMART-P. The VISTA facility is an integral test facility including the primary and secondary systems as well as safety-related Passive Residual heat removal (PRHR) systems. Its scaled ratio with respect to the SMART-P is 1/1 in height and 1/96 in volume and heater power. So far, several steady states and transient tests have been carried out to verify the overall thermal hydraulic primary and secondary characteristics in a range of 10% to 100% power operation. As results of preliminary results, the steady state conditions were found to coincide with the expected design values of the SMART-P. But the major thermal hydraulic parameters are greatly affected by the initial water level and the nitrogen pressure in the reactor upper annular cavity. In the PRHR transient tests, the steam inlet temperature of the PRHR system is found to drop suddenly from a superheated condition to a saturated condition at the end period of PRHR operation.

  19. Can the Ordered Multi-Stepping Over Hoop test be useful for predicting fallers among older people? A preliminary 1 year cohort study.

    Science.gov (United States)

    Tsutsumimoto, Kota; Doi, Takehiko; Misu, Shogo; Ono, Rei; Hirata, Soichiro

    2013-08-01

    To prevent falls among older people, we developed a new fall-risk assessment, the "Ordered Multi-Stepping Over Hoop (OMO)" test. The aims of this study were preliminary: to investigate the association of the OMO with cognitive and physical function and to investigate whether the OMO could predict incidents of falling. Fifty-nine community-dwelling older people (mean age = 88.0 ± 0.87, female = 49) were recruited. We assessed cognitive and physical function including the OMO test at baseline and monitored the falls of participants during a 12-month follow-up period from the baseline. We investigated whether the OMO was associated with cognitive function, physical function, and incidents of falling. To investigate whether the OMO could predict incidents of falling, a receiver operating characteristic analysis was conducted. The OMO time in fallers was significantly slower than for non-fallers. There were significant correlations between slower OMO times and lower physical functions and executive function. The area under the ROC curve in the OMO was 0.71 (p OMO identified those more likely to fall. The OMO time was correlated with cognitive function, physical function, and incidents of falling. Our preliminary study indicates that the OMO may help to make a distinction between fallers and non-fallers among older people as effectively as other tests.

  20. Development of a Bunch Frequency Monitor for the Preliminary Phase of the CLIC Test Facility CTF3

    CERN Document Server

    Caspers, Friedhelm; Ferrari, A; Rinolfi, Louis; Royer, P; Rydberg, A; Tecker, F A

    2003-01-01

    In the framework of the CLIC RF power source studies, the feasibility of the electron bunch train combination by injection with RF deflectors into an isochronous ring has been successfully demonstrated in the preliminary phase of CTF3. A new method, based on beam frequency spectrum analysis, was experimented to monitor this scheme. A coaxial pick-up and its read-out electronics were designed and mounted in the CTF3 ring to allow comparison of the amplitudes of five harmonics of the fundamental beam frequency (3 GHz) while combining the bunch trains. The commissioning of the monitor was a successful proof of principle for this new method, despite the short length of the bunch trains and the presence of parasitic signals associated to high-order waveguide modes propagating with the beam inside the pipe.

  1. A preliminary analysis of the data from an in vitro inflation-extension test can validate the assumption of arterial tissue elasticity.

    Science.gov (United States)

    Rachev, Alexander; Shazly, Tarek

    2013-08-01

    The objective of this study is to propose a method for preliminary processing of the experimental data from an inflation-extension test on tubular arterial specimens. The method is based on the condition for existence of a strain energy function (SEF) and can be used to verify whether the data from a certain experiment validate the assumption that the tissue can be considered as an elastic solid. As an illustrative example of the proposed method, experimental data for a porcine renal artery are used and the sources of the error in satisfying the condition of elasticity are analyzed. The results lead to the conclusion that the experimental data for a renal artery validate that the artery exhibits an elastic mechanical response and a constitutive formulation based on the existence of the SEF is justified. A modification of the proposed method for the case of an in-plane biaxial stretching test of mechanically isotropic and orthotropic tissues is considered.

  2. Durability and Reliability of Electric Vehicle Batteries under Electric Utility Grid Operations. Part 1: Cell-to-Cell Variations and Preliminary Testing

    Directory of Open Access Journals (Sweden)

    Arnaud Devie

    2016-09-01

    Full Text Available Vehicle-to-grid (V2G and grid-to-vehicle (G2V strategies are considered to help stabilize the electric grid but their true impact on battery degradation is still unknown. The intention of this study is to test the impact of such strategies on the degradation of commercial Li-ion batteries. This first part looks into the preliminary testing performed prior to the start of degradation studies to ensure that the selected cells are compatible. Both the thermodynamic and kinetic cell-to-cell variation within the selected batch and the diagnostic-ability of the cells were investigated. The cells were found to have low cell-to-cell variations and are thus consistent. Moreover, the emulation of the full cell from the half-cell data prepared from harvested electrodes was successful and the degradation forecast showed that the main degradation modes can be differentiated.

  3. A preliminary validity study of the cambridge neuropsychological test automated battery for the assessment of executive function in schizophrenia and bipolar disorder.

    Science.gov (United States)

    Kim, Hee Sun; An, Yong Min; Kwon, Jun Soo; Shin, Min-Sup

    2014-10-01

    Although the executive function subtests of the Cambridge Neuropsychological Test Automated Battery (CANTAB) have been used to assess cognitive function in diverse psychiatric illnesses, few studies have verified the validity of this battery for Korean psychiatric patients. Therefore, this preliminary study evaluated the construct and concurrent validity of the executive function subtests of the CANTAB for Korean psychiatric patients by comparing it with subtests of the Computerized Neuropsychological Test (CNT). Three subtests of the CANTAB and three subtests of the CNT were administered to 36 patients diagnosed with either schizophrenia or bipolar disorder. Subtests of the CANTAB included the Intra/Extra-Dimensional Set Shift (IED), Stockings of Cambridge (SOC), and Spatial Working Memory (SWM). Differences between groups on each subtest as well as correlations between the subtests of the CANTAB and the CNT were assessed. The schizophrenia group performed significantly more poorly on the IED and the Wisconsin Card Sorting Test (WCST) compared with the bipolar disorder group. Additionally, correlation analyses revealed a significant correlation between the IED and the WCST; a positive correlation between the SOC and the Trail Making Test, Part B and the Stroop test; and a significant correlation between the SWM and the Stroop test. This study verified the construct and concurrent validity of the executive function subtests of the CANTAB for Korean psychiatric patients and suggests that the subtests of this battery would be useful and appropriate for assessing deficits in executive function in Korean clinical settings.

  4. [N.B.T. - PABA screening test for exocrine pancreatic function in healthy children. Preliminary investigation in 60 normal children].

    Science.gov (United States)

    Della Morte, M A; Losi, S; Morelli, P; Ripa, C; Sala, M R; Cereda, M; Mancosu, M; Saputo, V

    1982-01-01

    The theoretical bases of PABA test as a diagnostic screening test of exocrine pancreatic insufficiency, its mode of execution and the findings obtained in 60 healthy subjects ranging in age from 2 to 14 years are reported. Those conditions related to extra-pancreatic disorders or to other factors that may interfere with the test and reduce its reliability are also discussed.

  5. Thermal Conductivity Measurements By Means of a New `Small Hot-Box' Apparatus: Manufacturing, Calibration and Preliminary Experimental Tests on Different Materials

    Science.gov (United States)

    Buratti, C.; Belloni, E.; Lunghi, L.; Barbanera, M.

    2016-05-01

    The evaluation of the thermal performance building components requires a high level of accuracy. Windows, doors and thermal bridges are not homogeneous, and their thermal transmittance can be evaluated by means of Hot-Box, used for full-scale elements. For homogeneous materials and one-dimensional heat flux, the thermal conductivity can be easily measured through other experimental apparatuses, such as the guarded hot plate and the heat flow meters. This study presents a new experimental apparatus named Small Hot-Box, built at the University of Perugia. No European standards are available for this innovative facility, but it takes into account some prescriptions of EN ISO 8990 and EN ISO 12567; it was built for the evaluation of the thermal properties of small specimens. The apparatus was designed, built, and calibrated by means of preliminary measurements. It is composed of a hot and a cold side, and the external walls are made of thick insulation. The thermal conductivity can be calculated by two different methodologies: the Hot-Box and the thermal flux meter method. Preliminary calibrations were carried out and different materials with known thermal transmittance were tested. The aim is the development of a new experimental apparatus; guidance documents could be defined for the measurements methodology requirements.

  6. Antimicrobial susceptibility determined by the E test, Löwenstein-Jensen proportion, and DNA sequencing methods among Mycobacterium tuberculosis isolates discrepancies, preliminary results

    Directory of Open Access Journals (Sweden)

    Maria Inês Moura Freixo

    2004-02-01

    Full Text Available Mycobacterium tuberculosis strains resistant to streptomycin (SM, isoniazid (INH, and/or rifampin (RIF as determined by the conventional Löwenstein-Jensen proportion method (LJPM were compared with the E test, a minimum inhibitory concentration susceptibility method. Discrepant isolates were further evaluated by BACTEC and by DNA sequence analyses for mutations in genes most often associated with resistance to these drugs (rpsL, katG, inhA, and rpoB. Preliminary discordant E test results were seen in 75% of isolates resistant to SM and in 11% to INH. Discordance improved for these two drugs (63% for SM and none for INH when isolates were re-tested but worsened for RIF (30%. Despite good agreement between phenotypic results and sequencing analyses, wild type profiles were detected on resistant strains mainly for SM and INH. It should be aware that susceptible isolates according to molecular methods might contain other mechanisms of resistance. Although reproducibility of the LJPM susceptibility method has been established, variable E test results for some M. tuberculosis isolates poses questions regarding its reproducibility particularly the impact of E test performance which may vary among laboratories despite adherence to recommended protocols. Further studies must be done to enlarge the evaluated samples and looked possible mutations outside of the hot spot sequenced gene among discrepant strains.

  7. Point-of-Care Testing in Bathhouses: A Narrative Inquiry into the Experience of Receiving a Positive Preliminary HIV Test Result.

    Science.gov (United States)

    Genoway, Shyla; Caine, Vera; Singh, Ameeta E; Estefan, Andrew

    2016-01-01

    With a call to increase the accessibility of HIV testing, point-of-care testing for HIV is being readily adopted, but little attention has been paid to the experiences of people being tested at HIV point-of-care sites. Some testing environments, such as bathhouses, promote testing for HIV in higher-risk groups. In this narrative inquiry study we explored the experiences of people testing positive for HIV through point-of-care while at a bathhouse. Three narrative threads for reconsidering the practice were identified: (a) seeing complexities, understanding testing decisions in relation to time, place, and social context; (b) recognizing the impact and significance of secret and silent stories; and (c) tentative and tension-filled connections to care. It is important to understand testing experiences across time, place, and in diverse social contexts. These experiences are embedded within the larger life histories of people and raise questions about adequate support, follow-up, and counseling.

  8. Preliminary chemical analysis and biological testing of materials from the HRI catalytic two-stage liquefaction (CTSL) process. [Aliphatic hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Later, D.W.; Wilson, B.W.

    1985-01-01

    Coal-derived materials from experimental runs of Hydrocarbon Research Incorporated's (HRI) catalytic two-stage liquefaction (CTSL) process were chemically characterized and screened for microbial mutagenicity. This process differs from two-stage coal liquefaction processes in that catalyst is used in both stages. Samples from both the first and second stages were class-fractionated by alumina adsorption chromatography. The fractions were analyzed by capillary column gas chromatography; gas chromatography/mass spectrometry; direct probe, low voltage mass spectrometry; and proton nuclear magnetic resonance spectrometry. Mutagenicity assays were performed with the crude and class fractions in Salmonella typhimurium, TA98. Preliminary results of chemical analyses indicate that >80% CTSL materials from both process stages were aliphatic hydrocarbon and polynuclear aromatic hydrocarbon (PAH) compounds. Furthermore, the gross and specific chemical composition of process materials from the first stage were very similar to those of the second stage. In general, the unfractionated materials were only slightly active in the TA98 mutagenicity assay. Like other coal liquefaction materials investigated in this laboratory, the nitrogen-containing polycyclic aromatic compound (N-PAC) class fractions were responsible for the bulk of the mutagenic activity of the crudes. Finally, it was shown that this activity correlated with the presence of amino-PAH. 20 figures, 9 tables.

  9. Preliminary identification of potentially disruptive scenarios at the Greater Confinement Disposal Facility, Area 5 of the Nevada Test Site

    Energy Technology Data Exchange (ETDEWEB)

    Guzowski, R.V. [Science Applications International Corp., Albuquerque, NM (United States); Newman, G. [GRAM, Inc., Albuquerque, NM (United States)

    1993-12-01

    The Greater Confinement Disposal location is being evaluated to determine whether defense-generated transuranic waste buried at this location complies with the Containment Requirements established by the US Environmental Protection Agency. One step in determining compliance is to identify those combinations of events and processes (scenarios) that define possible future states of the disposal system for which performance assessments must be performed. An established scenario-development procedure was used to identify a comprehensive set of mutually exclusive scenarios. To assure completeness, 761 features, events, processes, and other listings (FEPS) were compiled from 11 references. This number was reduced to 205 primarily through the elimination of duplications. The 205 FEPs were screened based on site-specific, goal-specific, and regulatory criteria. Four events survived screening and were used in preliminary scenario development: (1) exploratory drilling penetrates a GCD borehole, (2) drilling of a withdrawal/injection well penetrates a GCD borehole, (3) subsidence occurs at the RWMS, and (4) irrigation occurs at the RWMS. A logic diagram was used to develop 16 scenarios from the four events. No screening of these scenarios was attempted at this time. Additional screening of the currently retained events and processes will be based on additional data and information from site-characterization activities. When screening of the events and processes is completed, a final set of scenarios will be developed and screened based on consequence and probability of occurrence.

  10. Design and test of an extremely high resolution Timing Counter for the MEG II experiment: preliminary results

    CERN Document Server

    De Gerone, M; Ootani, W; Uchiyama, Y; Nishimura, M; Shirabe, S; Cattaneo, P W; Rossella, M

    2013-01-01

    The design and tests of Timing Counter elements for the upgrade of the MEG experiment, MEG II,is presented. The detector is based on several small plates of scintillator with a Silicon PhotoMultipliers dual-side readout. The optimisation of the single counter elements (SiPMs, scintillators, geometry) is described. Moreover, the results obtained with a first prototype tested at the Beam Test Facility (BTF) of the INFN Laboratori Nazionali di Frascati (LNF) are presented.

  11. Use of LARA-urea Breath Test in diagnosis of Helicobacter pylori Infection in Children and Adolescents: A Preliminary Study

    Directory of Open Access Journals (Sweden)

    Andrew S Day

    2003-01-01

    Full Text Available BACKGROUND: An accurate diagnosis of Helicobacter pylori infection in children currently relies upon histological assessment or culture of gastric biopsies obtained at endoscopy. Noninvasive testing would permit simpler assessment of children with dyspeptic symptoms. The primary aim of the present study was to prospectively evaluate a novel urea breath testing method in children undergoing diagnostic assessment of dyspeptic symptoms and secondarily to consider the roles of other noninvasive tests in these children.

  12. Preliminary Radiation Testing of a State-of-the-Art Commercial 14nm CMOS Processor/System-on-a-Chip

    Science.gov (United States)

    Szabo, Carl M., Jr.; Duncan, Adam; LaBel, Kenneth A.; Kay, Matt; Bruner, Pat; Krzesniak, Mike; Dong, Lei

    2015-01-01

    Hardness assurance test results of Intel state-of-the-art 14nm “Broadwell” U-series processor / System-on-a-Chip (SoC) for total ionizing dose (TID) are presented, along with exploratory results from trials at a medical proton facility. Test method builds upon previous efforts [1] by utilizing commercial laptop motherboards and software stress applications as opposed to more traditional automated test equipment (ATE).

  13. Preliminary Radiation Testing of a State-of-the-Art Commercial 14nm CMOS Processor - System-on-a-Chip

    Science.gov (United States)

    Szabo, Carl M., Jr.; Duncan, Adam; LaBel, Kenneth A.; Kay, Matt; Bruner, Pat; Krzesniak, Mike; Dong, Lei

    2015-01-01

    Hardness assurance test results of Intel state-of-the-art 14nm Broadwell U-series processor System-on-a-Chip (SoC) for total dose are presented, along with first-look exploratory results from trials at a medical proton facility. Test method builds upon previous efforts by utilizing commercial laptop motherboards and software stress applications as opposed to more traditional automated test equipment (ATE).

  14. Periodic sound-based 6-minute walk test forpatients with Duchenne muscular dystrophy:a preliminary study

    Science.gov (United States)

    Nishizawa, Hitomi; Genno, Hirokazu; Shiba, Naoko; Nakamura, Akinori

    2015-01-01

    [Purpose] The purpose of this study was to verify if a periodic sound-based 6-minute walk test with the best periodic sound could be used to evaluate physical endurance more precisely than the conventional 6-minute walk test. [Subjects] The subjects were healthy subjects and 6 ambulant patients with Duchenne muscular dystrophy. [Methods] The subjects initially walked for 1 minute to a long-interval metronome sound, and the walking distance was measured. The sound interval was then gradually shortened, and the subjects walked for 1 minute for each of the intervals. The best periodic sound was considered to be the periodic sound used when the subject walked the longest distance in 1 minute, and the process of determining it was referred to as the period shortening walk test. This study administered the 6-minute walk test with the best periodic sound to twenty healthy subjects and 6 ambulant patients with Duchenne muscular dystrophy and compared the walking distance. [Results] The periodic sound-based 6-minute walk test distances in both the healthy subjects and the patients were significantly longer than the conventional 6-minute walk test distances. [Conclusion] The periodic sound-based 6-minute walk test provided a better indication of ambulatory potential in an evaluation of physical endurance than the conventional 6-minute walk test. PMID:26696721

  15. How Are Spoken Skills Assessed in Proficiency Tests of General English as a Foreign Language? A Preliminary Survey

    Science.gov (United States)

    Roca-Varela, Mª Luisa; Palacios, Ignacio M.

    2013-01-01

    This paper examines some of the best known proficiency tests in English, with particular focus on the oral component. Attention is paid to the following issues, among others: the weighting of oral elements in testing, the criteria used for the assessment of oral skills and the relation of these to the general guidelines in the "Common…

  16. Reliability and Factorial Validity of Non-Specific and Tennis-Specific Pre-Planned Agility Tests; Preliminary Analysis

    Science.gov (United States)

    Sekulic, Damir; Uljevic, Ognjen; Peric, Mia; Spasic, Miodrag; Kondric, Miran

    2017-01-01

    Abstract Agility is an important quality in tennis, yet there is an evident lack of studies focussing on the applicability of tennis-specific agility performances and comparing them to equivalent non-specific agility performances. The aim of this study was to evaluate the reliability and factorial validity of three tests of pre-planned agility, performed in specific (with a tennis racquet) and non-specific (without a tennis racquet) conditions. The sample consisted of 33 tennis players (13 males and 20 females; age: 18.3 ± 1.1 years and 18.6 ± 1.3 years; body height: 185.4 ± 51 cm and 169.3 ± 4.2 cm, 74.0 ± 4.4 kg and 61.2 ± 3.1 kg, respectively). The variables comprised three agility tests: a 20-yard test, a T-test and the Illinois test, all performed in both specific and non-specific conditions. Between-subject and within-subject reliability were found to be high (Cronbach Alpha: 0.93 to 0.98; Coefficient of Variation: 3 to 8%), with better within-subject reliability and stability of the measurement for specific tests. Pearson’s product moment correlations between the non-specific and specific agility performances were high (r ≥0.84), while factor analysis extracted only one significant latent dimension on the basis of the Guttman-Kaiser criterion. The results of the 20-yard test were better when the test was conducted in the specific conditions (t-test = 2.66; p test, superior results were recorded in the non-specific conditions (t-test = 2.96; p test duration (about 20 s) and non-specific locomotion forms such as rotational movements. Considering the findings of the present study, when testing tennis-specific pre-planned agility, we suggest using tests of short duration (less than 10 s) and sport-specific types of locomotion. PMID:28210343

  17. Preliminary test results of a new high-energy-resolution silicon and CdZnTe pixel detectors for application to x-ray astronomy

    Science.gov (United States)

    Sushkov, V. V.; Hamilton, William J.; Hurley, Kevin; Maeding, Dale G.; Ogelman, Hakki; Paulos, Robert J.; Puetter, Richard C.; Tumer, Tumay O.; Zweerink, Jeffrey

    1999-10-01

    New, high spatial resolution CdZnTe (CZT) and silicon (Si) pixel detectors are highly suitable for x-ray astronomy. These detectors are planned for use in wide field of view, imaging x-ray, and low energy gamma-ray all-sky monitor (AXGAM) in a future space mission. The high stopping power of CZT detectors combined with low-noise front-end readout makes possible an order of magnitude improvement in spatial and energy resolution in x-ray detection. The AXGAM instrument will be built in the form of a fine coded aperture placed over two-dimensional, high spatial resolution and low energy threshold CZT pixel detector array. The preliminary result of CZT and silicon pixel detector test with low-noise readout electronics system are presented. These detectors may also be used with or without modification for medical and industrial imaging.

  18. The Verbal Clock Test: preliminary validation of a brief, vision- and motor-free measure of executive function in a clinical sample.

    Science.gov (United States)

    Cercy, Steven P

    2012-01-01

    Assessment of executive functions is frequently time-consuming, and although some brief measures exist they are subject to problems associated with limited education, culture of origin, impairments of motor or visual systems, and tolerability. Preliminary validation of a newly developed measure, the Verbal Clock Test (VCT), was conducted in a clinical sample of 294 patients who underwent neuropsychological evaluation. The evidence supports the interpretation of VCT scores as demonstrating construct validity, criterion-related validity, and sound internal consistency. Performance does not vary substantially with gender or mood, and variability associated with age, education, and ethnicity is modest. Confounding effects of motor and visual impairments are eliminated. Initial data suggest the VCT represents a reasonable method of assessing abstract reasoning and concept formation when clinical circumstances limit the use of currently available measures.

  19. Preliminary reliability test of lateral-current-injection GaInAsP/InP membrane distributed feedback laser on Si substrate fabricated by adhesive wafer bonding

    Science.gov (United States)

    Fukuda, Kai; Inoue, Daisuke; Hiratani, Takuo; Amemiya, Tomohiro; Nishiyama, Nobuhiko; Arai, Shigehisa

    2017-02-01

    A preliminary reliability test was performed for lateral-current-injection GaInAsP/InP membrane Distributed Feedback (DFB) lasers fabricated by multi-regrowth and adhesive wafer bonding. The measurement was conducted for lasers with two different types of p-side electrode: Ti/Au and Au/Zn/Au. The device with the Au/Zn/Au electrode, which had better current-voltage (I-V) characteristics, showed no degradation of differential quantum efficiency and threshold current after continuous aging for 310 h at a bias current density of 5 kA/cm2. This result indicates that the multi-regrowth and bonding process for the GaInAsP/InP membrane DFB laser will not impact the initial reliability.

  20. Immediate conversion to CAS after neurological intolerance at cross-clamping test during CEA: a preliminary experience.

    Science.gov (United States)

    Guy Bianchi, P; Tolva, V; Dalainas, I; Bertoni, G; Cireni, L; Trimarchi, S; Rampoldi, V; Casana, R

    2012-02-01

    The aim of this preliminary study is to evaluate the feasibility and efficacy of CAS as treatment option to endarterectomy when carotid shunt cannot be used safely. The medical records concerning 469 carotid stenosis treated between January 2006 and December 2009 were retrospectively reviewed, focusing on cross-clamp intolerance during CEA. Patients with cross-clamping intolerance were divided in two groups. Group 1: those that concluded the open procedure with the use of a shunt, and Group 2: those who experience immediate brain intolerance and coma and were immediately converted to an endovascular procedure. Mortality and neurological adverse event rate were compared between shunted CEA and cross-clamping intolerant cases converted into CAS. The secondary end-point was long-term survival. Carotid cross-clamp intolerance occurred in 30 cases (8.7%). CEA with Pruitt-Inahara's shunt was performed in 17 cases with a perioperative neurological adverse event rate of 23.5%. In 13 cases limitations to shunting due to quick onset of coma and/or an unfavorable anatomy were encountered. In these 13 cases the open intervention was immediately converted into endovascular procedure. Technical success was achieved in all the converted to CAS cases (100%), with a perioperative neurological adverse event rate of 7.7% (P=0.35 between the two groups). No significant difference emerges comparing patient's survival between the cases Nevertheless, the small dimension of this survey, immediate conversion to CAS resulted feasible with a lower risk of neurological adverse events if compared to CEA with shunt, and could be considered as an alternative to CEA when carotid shunt cannot be used safely.

  1. Preliminary on the isotope hydrology investigations at the Nevada test site: Hydrologic resources management program; FY 1992--1993

    Energy Technology Data Exchange (ETDEWEB)

    Davisson, M.L.; Kenneally, J.M.; Smith, D.K.; Hudson, G.B.; Nimz, G.J.; Rego, J.H.

    1994-01-01

    A comprehensive isotope data base of the NTS groundwaters collected during FY 92-93 is presented with preliminary interpretations. Multiple samples were collected from over 30 sites on pumped wells and open-holes by wireline bailing. Field water level measurements indicate essentially a bimodal distribution separated by water levels at higher elevations (e.g. Pahute Mesa) from water levels of lower elevations (e.g. Yucca and Frenchman Flats). Down hole temperature measurements have confirmed anomalous temperature gradients in the eastern Yucca Flat area and on Pahute Mesa, where horizontal temperature gradients up to 0.33{degrees}F/100ft are found. Consistent with previous reports by others, the major ion geochemistry of the NTS groundwater are dominated by Na-K-HCO{sub 3} and Ca-Mg-HCO{sub 3} water types, where the Na-rich water appears to be related to dissolution in the volcanic tuffs and the Ca-rich water to the Paleozoic carbonates. Increases in dissolved Si also seems to be indicative of groundwater that resides in the volcanic tuffs. Processes controlling the Na/Ca ratios are complex and may include ion exchange reactions with clays, evaporative concentration in the vadose zone, and lithological heterogeneities in addition to simple differential dissolution between the volcanic tuffs and the Paleozoic carbonates. Apparent {sup 14}C ages range between 4000 and 38,000 years for groundwaters at the NTS. The uncertainty is large for exact age determinations at this time. The {sup 14}C abundance decreases with increased dissolved HCO{sub 3}, and {sup 13}C suggests dissolution of the ``dead`` Paleozoic carbonates significantly influence the ages, but more work is needed to investigate the influence of vadose zone carbonate.

  2. Preliminary geochemical and physical testing of materials for plugging of man-made accesses to a repository in basalt

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, C.L.; Anttonen, G.J.; O' Rourke, J.E.; Allirot, D.

    1980-04-01

    The available data on environmental conditions (both natural and man-made) at the Hanford Site are sufficient for preconceptual plug system design. Results of the geochemical testing program indicate that preferred candidate plug materials are chemically nonreactive during laboratory tests that simulated some of the expected environmental conditions. Agitated, crushed-basalt samples and mixtures containing basalt were found to be self-cementing under the hydrothermal conditions. Materials considered most suitable for consideration in future test programs and preconceptual plug design are mixtures of natural materials (basalt, clay, glaciofluvial sand, gravel, and zeolite) and processed natural materials (portland cement Type V and grouts plus additives).

  3. The North Carolina State Testing Results. Preliminary State - Level Data Only. Multiple-Choice. Grade 3 Pretest. End-of-Grade (Grades 3-8); and End-of-Course Tests. Reporting on the State and 117 Public School Systems and 92 Charter Schools. "The Green Book."

    Science.gov (United States)

    North Carolina State Dept. of Public Instruction, Raleigh. Div. of Accountability.

    This book contains data reported to the North Carolina Department of Public Instruction before August 12, 2002 about state testing results. It contains preliminary 2001-2002 state testing results for: (1) grade 3 pretest, in reading and mathematics; (2) end-of-grade tests at grades 3 through 8, multiple choice tests; (3) alternate assessment…

  4. Preliminary Report on Oak Ridge National Laboratory Testing of Drake/ACSS/MA2/E3X

    Energy Technology Data Exchange (ETDEWEB)

    Irminger, Philip [ORNL; Davis, Cody [General Cable Corporation; Temple, Bill [General Cable Corporation; Baker, Gord [General Cable Corporation; Starke, Michael R [ORNL

    2016-01-01

    A key to industry acceptance of a new technology is extensive validation in field trials. The Powerline Conductor Accelerated Test facility (PCAT) at Oak Ridge National Laboratory (ORNL) is specifically designed to evaluate the performance and reliability of a new conductor technology under real world conditions. The facility is set up to capture large amounts of data during testing. General Cable used the ORNL PCAT facility to validate the performance of TransPowr with E3X Technology a standard overhead conductor with an inorganic high emissivity, low absorptivity surface coating. Extensive testing has demonstrated a significant improvement in conductor performance across a wide range of operating temperatures, indicating that E3X Technology can provide a reduction in temperature, a reduction in sag, and an increase in ampacity when applied to the surface of any overhead conductor. This report provides initial results of that testing.

  5. Health Orientation, Knowledge, and Attitudes toward Genetic Testing and Personalized Genomic Services: Preliminary Data from an Italian Sample

    Directory of Open Access Journals (Sweden)

    Serena Oliveri

    2016-01-01

    Full Text Available Objective. The study aims at assessing personality tendencies and orientations that could be closely correlated with knowledge, awareness, and interest toward undergoing genetic testing. Methods. A sample of 145 subjects in Italy completed an online survey, investigating demographic data, health orientation, level of perceived knowledge about genetic risk, genetic screening, and personal attitudes toward direct to consumer genetic testing (DTCGT. Results. Results showed that respondents considered genetic assessment to be helpful for disease prevention, but they were concerned that results could affect their life planning with little clinical utility. Furthermore, a very high percentage of respondents (67% had never heard about genetic testing directly available to the public. Data showed that personality tendencies, such as personal health consciousness, health internal control, health esteem, and confidence, motivation to avoid unhealthiness and motivation for healthiness affected the uptake of genetic information and the interest in undergoing genetic testing. Conclusions. Public knowledge and attitudes toward genetic risk and genetic testing among European countries, along with individual personality and psychological tendencies that could affect these attitudes, remain unexplored. The present study constitutes one of the first attempts to investigate how such personality tendencies could motivation to undergo genetic testing and engagement in lifestyle changes.

  6. Health Orientation, Knowledge, and Attitudes toward Genetic Testing and Personalized Genomic Services: Preliminary Data from an Italian Sample

    Science.gov (United States)

    Arnaboldi, Paola; Cutica, Ilaria; Fioretti, Chiara

    2016-01-01

    Objective. The study aims at assessing personality tendencies and orientations that could be closely correlated with knowledge, awareness, and interest toward undergoing genetic testing. Methods. A sample of 145 subjects in Italy completed an online survey, investigating demographic data, health orientation, level of perceived knowledge about genetic risk, genetic screening, and personal attitudes toward direct to consumer genetic testing (DTCGT). Results. Results showed that respondents considered genetic assessment to be helpful for disease prevention, but they were concerned that results could affect their life planning with little clinical utility. Furthermore, a very high percentage of respondents (67%) had never heard about genetic testing directly available to the public. Data showed that personality tendencies, such as personal health consciousness, health internal control, health esteem, and confidence, motivation to avoid unhealthiness and motivation for healthiness affected the uptake of genetic information and the interest in undergoing genetic testing. Conclusions. Public knowledge and attitudes toward genetic risk and genetic testing among European countries, along with individual personality and psychological tendencies that could affect these attitudes, remain unexplored. The present study constitutes one of the first attempts to investigate how such personality tendencies could motivation to undergo genetic testing and engagement in lifestyle changes. PMID:28105428

  7. Assessing speech perception in Swedish school-aged children: preliminary data on the Listen-Say test.

    Science.gov (United States)

    Nakeva von Mentzer, Cecilia; Sundström, Martina; Enqvist, Karin; Hällgren, Mathias

    2017-10-10

    To meet the need for a linguistic speech perception test in Swedish, the 'Listen-Say test' was developed. Minimal word pairs were used as speech material to assess seven phonetic contrasts in two auditory backgrounds. In the present study, children's speech discrimination skills in quiet and in four-talker (4T) speech background were examined. Associations with lexical-access skills and academic achievement were explored. The study included 27 school children 7-9 years of age. Overall, the children discriminated phonetic contrasts well in both conditions (quiet: Mdn 95%; 4T speech; Mdn 91% correct). A significant effect of 4T speech background was evident in three of the contrasts, connected to place of articulation, voicing and syllable complexity. Reaction times for correctly identified target words were significantly longer in the quiet condition, possibly reflecting a need for further balancing of the test order. Overall speech discrimination accuracy was moderately to highly correlated with lexical-access ability. Children identified as having high concentration ability by their teacher had the highest speech discrimination scores in both conditions followed by children identified as having high reading ability. The first wave of data collection with the Listen-Say test indicates that the test appears to be sensitive to predicted perceptual difficulties of phonetic contrasts particularly in noise. The clinical benefit of using a procedure where speech discrimination, lexical-access ability and academic achievement are taken into account is discussed as well as issues for further test refinement.

  8. Development of a Rapid Immunodiagnostic Test for Pork Components in Raw Beef and Chicken Meats: a Preliminary Study

    Directory of Open Access Journals (Sweden)

    S. N. Depamede

    2011-08-01

    Full Text Available A rapid immunodiagnostic test that provides visual evidence of the presence of pork components in raw beef and chicken meats was developed. Colloidal gold was prepared and conjugated with anti-Swine IgG polyclonal antibody. Immunochromatographic test strips were produced, and then were used to test laboratory adulterated raw meat samples. The samples consisted adulteration meat, immunodiagnostic, pork, rapid test of pork-in-beef, or pork-in-chicken at 1/0; 1/100; 1/1,000; 1/5,000; 1/10,000 (w/w adulteration levels that were extracted in phosphate-buffered saline. Raw beef and chicken meats without pork were included as controls. Analysis was completed in 10 min. Detection limit was 1/5,000 (w/w, although 1/10,000 was also observed. This immunodiagnostic tests can be conveniently applied to detect low levels of pork components in raw beef and chicken meat products. For the commercial purposes, further studies need to be carried out.

  9. Contact sensitization in venous eczema: Preliminary results of patch testing with Indian standard series and topical medicaments

    Directory of Open Access Journals (Sweden)

    Jindal Rashmi

    2009-01-01

    Full Text Available Background and Aims: Elimination of allergens/topical medications causing contact dermatitis in venous eczema, which poses a significant problem in its chronicity and treatment, provides the basis for better therapeutic outcome. Our objective was to determine the pattern of contact sensitization in venous eczema patients in Himachal Pradesh (India. Methods: Thirty-four patients (M:F, 31:3 and 10 controls (M:F, 6:4 were patch tested with Indian standard series and 10 commonly used topical medicaments. Results: Positive patch test results were seen in 50% (M:F, 16:1 of the patients. Common allergens were Fragrance mix (15%, p-phenylendiamine (15%, nickel (9%, wool alcohol (9%, chinoform (9%, balsum of Peru (5%, cobalt chloride (5%, potassium dichromate (3%, epoxy resin (3%, thiuram mix (3% and formaldehyde (3%. Only sisomycin and miconazole among the topical medications elicited a positive patch test reaction in 3 and 5% patients, respectively. Neomycin contact sensitivity was not seen in any of the patients. One patient who had exacerbation of venous eczema following accidental application of topical diclofenac showed a positive patch test reaction to it. Conclusions: Patch test should be used to identify the topical agents that may be responsible for perpetuation or aggravation of eczema, especially in patients who do not improve despite adequate treatment of other underlying cause(s.

  10. PRELIMINARY ASSESSMENT OF NDE METHODS ON INSPECTION OF HDPE BUTT FUSION PIPING JOINTS FOR LACK OF FUSION WITH VALIDATION FROM MECHANICAL TESTING

    Energy Technology Data Exchange (ETDEWEB)

    Crawford, Susan L.; Doctor, Steven R.; Cinson, Anthony D.; Watts, Michael W.; Moran, Traci L.; Anderson, Michael T.

    2010-07-22

    Studies at the Pacific Northwest National Laboratory (PNNL) in Richland, Washington, are being conducted to evaluate nondestructive examinations (NDE) coupled with mechanical testing of butt fusion joints in high density polyethylene (HDPE) pipe for assessing lack of fusion. The work provides information to the United States Nuclear Regulatory Commission (NRC) on the effectiveness of volumetric inspection techniques of HDPE butt fusion joints in Section III, Division 1, Class 3, buried piping systems in nuclear power plants. This paper describes results from preliminary assessments using ultrasonic and microwave nondestructive techniques and mechanical testing with the high speed tensile impact test and the bend test for determining joint integrity. A series of butt joints were fabricated in 3408, 12 inch (30.5 cm) IPS DR-11 HDPE material by varying the fusion parameters to create good joints and joints containing a range of lack of fusion conditions. Six of these butt joints were volumetrically examined with time of flight diffraction (TOFD), phased array (PA) ultrasound, and the Evisive microwave system. The outer diameter (OD) weld beads were removed for microwave evaluation and the pipes ultrasonically re-evaluated. In two of the six pipes both the outer and inner diameter (ID) weld beads were removed and the pipe joints re-evaluated. Several of the pipes were sectioned and the joints destructively evaluated with the following techniques: high speed tensile test, bend test, and focused immersion ultrasound on a joint section removed from the pipe coupled with slicing through the joint and examining the revealed surfaces. The fusion parameters, nondestructive, and destructive evaluation results will be correlated to validate the effectiveness of what each NDE technology detects and what each does not detect. This is an initial limited study which will aid in identifying key future work.

  11. Stibine/arsine monitoring during EV operation: summary report on preliminary tests at ANL and at LILCO

    Energy Technology Data Exchange (ETDEWEB)

    Loutfy, R.O.; Graczyk, D.G.; Varma, R.; Hayes, E.R.; Williams, F.L.; Yao, N.P.

    1981-02-01

    A series of tests was performed to monitor the evolution and dispersal of stibine and arsine from the lead-acid propulsion batteries in three different Electra-Van Model 600 vehicles operated by Argonne National Laboratory (ANL) and by the Long Island Lighting Company (LILCO). Ambient air was sampled at several locations inside the vehicles and in the garages where testing was done during charge, equalization charge, and on-the-road discharge operations. In addition, direct sampling of cell off-gases was performed with the ANL van. Interpretation of the individual test results was carried out in the context of vehicle characteristics, sampling protocol, and operating conditions. The test results demonstrated that under the test conditions only small concentrations of stibine and arsine accumulated in occupiable work areas. Measured concentrations in the vehicles and in the garages never exceeded 25% of the Threshold Limit Value-Time Weighted Average (TLV-TWA) standards. A threshold voltage for hydride production, at about 2.45 V per cell, was reflected in the results of the experiments performed during charging of the batteries. Hydride evolution rates were lower during equalization charge than during the overcharge portion of a charge cycle when the on-board charger was used in a normal operating mode. A delayed release of the metal hydrides from the battery cells was observed during on-the-road operation of the vehicles. The implications of these observations for electric vehicle (EV) operation are discussed. An engineering analysis of the generation and dispersal of the metal hydrides is presented, and equations are derived for estimating minimum ventilation requirements for the EV battery compartment and for garages housing EV operations. Recommendations are made regarding safe handling procedures for battery off-gases, procedures for conducting stibine/arsine monitoring tests and future work.

  12. Development and preliminary testing of a computerized Animated Activity Questionnaire (AAQ) in patients with hip and knee osteoarthritis

    DEFF Research Database (Denmark)

    Peter, Wf; Loos, M; de Vet, Hcw

    2015-01-01

    Objective To develop an Animated Activity Questionnaire (AAQ), based on video animations, for assessing activity limitations in patients with hip/knee osteoarthritis (OA), which combines the advantages of self-reported questionnaires and performance-based tests, without many of their limitations......, 4) existing measurement instruments, and 5) focus groups of patients. Test-retest reliability was assessed in 30/110 patients. In 110 patients correlations were calculated between AAQ and self-reported Hip disability and Knee injury Osteoarthritis Outcome ADL subscale (H/KOOS). In 45/110 patients...

  13. Design And Preliminary Testing of a Hammer Mill with End-Suction Lift Capability Suitable for Commercial Processing of Grains and Solid Minerals in Nigeria

    Directory of Open Access Journals (Sweden)

    Ebunilo P. O.

    2010-06-01

    Full Text Available A hammer mill with an end-suction lift capability has been designed, fabricated and tested. The tests were carried out by comparing the product of a conventional hammer mill with that of the new hammer mill with end suction lift capability. The preliminary test results obtained using grains show that the efficiency of a conventional hammer mill and its ability to produce an output of specific size of 400m-600m for both maize and cowpeas is low when compared with the output of the new hammer mill. The new hammer mill, which is a partially closed system while in operation and utilizes suction power, virtually eliminates environmental pollution usually associated with the operation of conventional hammer mills and can be used to mill commonly occurring Nigerian grains like millet, sorghum, maize, cowpeas, guinea-corn and soya beans into flour and also for pulverizing locally occurring solid minerals like clays into powder. This would diversify storage options for the grains, deepen and widen the available food choices for all Nigerians and enhance food security and rural development.

  14. Preliminary results of tests of proprietary chemical additives, seeding, and other approaches for the reduction of scale in hypersaline geothermal systems

    Energy Technology Data Exchange (ETDEWEB)

    Harrar, J.E.; Locke, F.E.; Otto, C.H. Jr.; Deutscher, S.B.; Lim, R.; Frey, W.P.; Quong, R.; Lorensen, L.E.

    1979-02-01

    The LLL field brine-scaling test system and a variety of measurement techniques have been used to test a group of eight proprietary additives from eight different companies, a hydroxyethylcellulose previously found to retard silica precipitation, and geothermal sludge as a seeding agent to reduce scaling. For each additive, scaling rates at both 210 and 125/sup 0/C and on three different materials--mild steel, Teflon, and Hastelloy C-276--were measured using test coupons. Sections of steel pipe and perforated screens also were exposed to the treated brine, silica precipitation rates in the effluent brine were measured by means of the electrochemical linear polarization resistance technique. Examination of the pipe sections and chemical analyses of the scales are not complete, thus only preliminary conclusions are reported here. It appears that, although none of the additives effected a dramatic reduction in scaling rates, several decreased the rate of scaling of mild steel at 125/sup 0/C by a factor of 2 to 3. Only hydroxyethylcellulose retards the rate of precipitation of silica in the effluent brine. Scaling rates could not be measured accurately in the seeding experiment because of its short duration, but this brine treatment had the desired effect, at 125/sup 0/C, of reducing the level of dissolved silica and hence the scaling tendency of the brine. Further experiments of this type will be conducted.

  15. Preliminary assays for lemongrass essential oil ecotoxicological test in D. similis and C. silvestrii submitted to gamma radiation

    Energy Technology Data Exchange (ETDEWEB)

    Gimiliani, Giovana T.; Rogero, Sizue O.; Rogero, Jose R., E-mail: gtgimiliani@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Cruz, Aurea S. [Instituto Adolfo Lutz, Sao Paulo, SP (Brazil). Culturas Celulares

    2011-07-01

    Pharmaceutical products are of great interest in ecotoxicological studies due to being found some of these products in the superficial waters and sediments, water and sewage treatment effluents. It was verified an increase of insect repellent chemical products in the aquatic environment because of the increase of diseases transmitted by mosquitoes like dengue. As these compounds show toxicity, the use of essential oils natural products with repellent properties is increasing and the literature about the impact in the aquatic environment is scarce. The hydric frame would suffer natural radiation and radiations from energy generation nuclear plants impacts fall out of tests and nuclear accidents. There is no universal definition of environmental protection and there are few studies on radiation effects in the aquatic environment. In this study was determined the lemon grass essential oil toxicity level as well as the lethal dose of ionizing radiation, LD{sub 50}, in aquatic organisms. Cytotoxicity test was performed by in vitro neutral red uptake method in NCTC clone L929 cell line. In the LD{sub 50} test aquatic organisms were submitted to gamma radiation. The essential oil of lemongrass Cymbopogon flexuosus showed cytotoxicity index IC{sub 50} about 50{mu}g.mL{sup -1}. The LD{sub 50} for Daphnia similis was 242 Gy and Ceriodaphnia silvestrii about 525 Gy. Studies will be continued with acute and chronic ecotoxicological tests of lemongrass essential oil in natural organisms and in organisms submitted to gamma radiation, utilizing the results obtained in this work. (author)

  16. Development of Bengali Audio-Visual Test Battery for Assessment of Pragmatic Skills: Preliminary Normative Data Based on Educational Level

    Science.gov (United States)

    Chakrabarty, Madhushree; Biswas, Atanu; Pal, Sandip; Chatterjee, Amita

    2017-01-01

    Pragmatic competence may be disrupted due to psychological and neurological causes. For appropriate remedy and rehabilitation, a precise assessment of pragmatic skills is important. However, there is no test battery in the Bengali language, and consequently, there is no published data on pragmatic ability of Bengali speakers. Due to the vast…

  17. Rapid Deployment Drilling System for on-site inspections under a Comprehensive Test Ban Preliminary Engineering Design

    Energy Technology Data Exchange (ETDEWEB)

    Maurer, W.C.; Deskins, W.G.; McDonald, W.J.; Cohen, J.H. [Maurer Engineering, Inc., Houston, TX (United States); Heuze, F.E.; Butler, M.W. [Lawrence Livermore National Lab., CA (United States)

    1996-09-01

    While not a new drilling technology, coiled-tubing (CT) drilling continues to undergo rapid development and expansion, with new equipment, tools and procedures developed almost daily. This project was undertaken to: analyze available technological options for a Rapid Deployment Drilling System (RDDS) CT drilling system: recommend specific technologies that best match the requirements for the RDDS; and highlight any areas where adequate technological solutions are not currently available. Postshot drilling is a well established technique at the Nevada Test Site (NTS). Drilling provides essential data on the results of underground tests including obtaining samples for the shot zone, information on cavity size, chimney dimensions, effects of the event on surrounding material, and distribution of radioactivity.

  18. Development of Bengali Audio-Visual Test Battery for Assessment of Pragmatic Skills: Preliminary Normative Data Based on Educational Level.

    Science.gov (United States)

    Chakrabarty, Madhushree; Biswas, Atanu; Pal, Sandip; Chatterjee, Amita

    2016-05-31

    Pragmatic competence may be disrupted due to psychological and neurological causes. For appropriate remedy and rehabilitation, a precise assessment of pragmatic skills is important. However, there is no test battery in the Bengali language, and consequently, there is no published data on pragmatic ability of Bengali speakers. Due to the vast diversity of the population, it becomes increasingly difficult to assess pragmatic ability of an individual without a proper knowledge of the normal variations. To address this problem we have developed a test battery in Bengali, and to begin with, we have administered it to one hundred and five (105) normal healthy persons having different levels of education. The four groups having 17 years and above, 15 to normative score of 193, 189, 171 and 150, respectively. These normative scores will allow clinicians to make a proper assessment of patients suffering from pragmatic deficits and help avoid interpreting social differences as neurological deficits.

  19. A Preliminary Report on Static Strength Testing for Use in the Development of Occupational Physical Selection Standards

    Science.gov (United States)

    1982-02-01

    Ergonomics Guide for the Assessment of Human Static Strength. Am. Ind. Hyg. Assn. J. 36: 505-511, 1975. 5. E. ASMUSSEN. Measurement of Muscular...and Shoulder Muscles. Ergonomics . 23(0): 37-47, 1980. 9. E KAMON. Personal communication, 1981. 10. B.J. WINER. Statistical Prinoiples in...adjustable belts, 5.0 centimeters in width. A stool * and a removable elbow rest, which attached to the wood support, were used in some of the tests. 2. The

  20. [Level of histamine in supernatants from the basophil activation test: applications to hymenoptera allergy and drug allergy--preliminary study].

    Science.gov (United States)

    Tamim, S; Lauret, M G; Drouet, M; Sabbah, A

    1999-02-01

    Histamine Release technic consists in calculating histamine liberated by blood cells in touch with an allergen. To this day, this method is only used in Hymenoptera venom allergy diagnosis. The principle of this study is to measure histamine released by activated basophils in surnageons of Basophil Activation Test (BAT) for different allergens: Hymenoptera venoms: Bee, White Faced Hornet, Vespula Wasp. Drugs: Cefaperos, Clamoxyl, Alfatil, Rapifen, Diprivan, Nesdonal, Mivacron. A threshold of positivity (amplification factor in comparison with the control) is determined for these two classes of allergens: 45 for Hymenoptera venoms and 9 for drugs. These results, compared to the other diagnosis technics (Histamine Release, Basophil Activation Test, Prick Tests) discloses very high correlation rates in each case. This method seems to be a reliable method for Hymenoptera venom allergy diagnosis and for drugs allergy diagnosis too. However, this study is based on a few number of patients, so a significant statistic conclusion can't be expressed but it opens an interesting way of research.

  1. Validation of the cross-linguistic naming test: a naming test for different cultures? A preliminary study in the Spanish population.

    Science.gov (United States)

    Gálvez-Lara, Mario; Moriana, Juan Antonio; Vilar-López, Raquel; Fasfous, Ahmed Fayez; Hidalgo-Ruzzante, Natalia; Pérez-García, Miguel

    2015-01-01

    Despite the consensus pointing out the importance of cultural variables in neuropsychological assessments, empirical studies within cross-cultural neuropsychology continue to be limited. The Cross-Linguistic Naming Test (CLNT) is a naming test that is supposed to have no influence from cultural variables. The aim of this paper is to determine the psychometric properties of the CLNT and its discriminatory validity (Experiment 1) and to determine the performance of the CLNT in different cultures (Experiment 2). Three groups followed the CLNT in Experiment 1: dementia patients, individuals with subjective memory complaints, and neurologically healthy volunteers. Three groups followed the CLNT in Experiment 2: Colombians, Moroccans, and Spaniards. The results showed that the psychometric properties of the CLNT are appropriate and that this test obtains a high specificity but a low sensitivity. Furthermore, no differences were found in the CLNT among the three cultural groups. The CLNT may be appropriate for the screening of naming impairment in Colombian, Moroccan, and Spanish cultures.

  2. Development and preliminary testing of a self-rating instrument to measure self-directed learning ability of nursing students.

    Science.gov (United States)

    Cheng, Su-Fen; Kuo, Chien-Lin; Lin, Kuan-Chia; Lee-Hsieh, Jane

    2010-09-01

    With the growing trend of preparing students for lifelong learning, the theory of self-directed learning (SDL) has been increasingly applied in the context of higher education. In order to foster lifelong learning, abilities among nursing students, faculties need to have an appropriate instrument to measure the SDL abilities of nursing students. The objectives of this study were to develop an instrument to measure the SDL abilities of nursing students and to test the validity and reliability of this instrument. This study was conducted in 4 phases. In Phase 1, based on a review of the literature, the researchers developed an instrument to measure SDL. In Phase 2, two rounds of the Delphi study were conducted, to determine the content validity of the instrument. In Phase 3, a convenience sample of 1072 nursing students from two representative schools across three different types of nursing programs were recruited to test the construct validity of the Self-Directed Learning Instrument (SDLI). Finally, in Phase 4, the internal consistency and reliability of the instrument were tested. The resulting SDLI consists of 20 items across the following four domains: learning motivation, planning and implementing, self-monitoring, and interpersonal, communication. The final model in confirmatory factor analysis revealed that this 20-item SDLI indicated a good fit of the model. The value of Cronbach's alpha for the total scale was .916 and for the four domains were .801, .861, .785, and .765, respectively. The SDLI is a valid and reliable instrument for identifying student SDL abilities. It is available to students in nursing and similar medical programs to evaluate their own SDL. This scale may also enable nursing faculty to assess students' SDL status, design better lesson plans and curricula, and, implement appropriate teaching strategies for nursing students in order to foster the growth of lifelong learning abilities. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

  3. Preliminary vibration, acoustic, and shock design and test criteria for components on the HEAO-A spacecraft

    Science.gov (United States)

    1975-01-01

    These vibration, acoustic, and shock specifications provide the qualification test criteria for spacecraft components and subassemblies and for the High Energy Astronomy Observatory (HEAO-A) experiments. The HEAO-A was divided into zones and subzones to obtain simple component groupings. Zones are designated primarily to assist in determining the applicable specification. A Subzone is available for use when the location of the component is known but component design and weight are not well defined. When the location, weight, and mounting configuration of the component are known, the appropriate Subzone weight ranges are available. Experiment and specific component specifications are available.

  4. Preliminary vibration, acoustic, and shock design and test criteria for components on the Lightweight External Tank (LWT)

    Science.gov (United States)

    1981-01-01

    The Space Shuttle LWT is divided into zones and subzones. Zones are designated primarily to assist in determining the applicable specifications. A subzone (general Specification) is available for use when the location of the component is known but component design and weight are not well defined. When the location, weight, and mounting configuration of the component are known, specifications for appropriate subzone weight ranges are available. Along with the specifications are vibration, acoustic, shock, transportation, handling, and acceptance test requirements and procedures. A method of selecting applicable vibration, acoustic, and shock specifications is presented.

  5. Preliminary vibration, acoustic, and shock design and test criteria for components on the HEAO-C spacecraft

    Science.gov (United States)

    1975-01-01

    The vibration, acoustic, and shock specification test criteria for spacecraft components and subassemblies and for the high Energy Astronomy Observatory (HEAO-C) experiments are presented. The HEAO-C was divided into zones and subzones to obtain simple component groupings. Zones are designated primarily to assist in determining the applicable specification. A subzone (general specification) is available for use when the location of the component is known but component design and weight are not well defined. When the location, weight, and mounting configuration of the component are known, the appropriate subzone weight ranges (-A, -B, etc. ) are available. Experiment and specific component specifications are available.

  6. The North Carolina State Testing Results, 2000-01. Preliminary State-Level Data Only. Multiple-Choice Grade 3 Pretest, End-of-Grade, High School Comprehensive and End-of-Course Tests. Reporting on the State and 117 Public School Systems and 87 Charter Schools. "The Green Book."

    Science.gov (United States)

    North Carolina State Dept. of Public Instruction, Raleigh. Div. of Accountability/Testing.

    This document contains preliminary state-level results for the 2000-2001 North Carolina state testing program. No conclusions about achievement are drawn in this report, although percentages achieving at given Achievement Levels are given for the end-of-grade tests. The Grade 3 Pretest is a multiple-choice reading and mathematics test administered…

  7. A Preliminary Test of Measurement of Joint Angles and Stride Length with Wireless Inertial Sensors for Wearable Gait Evaluation System

    Directory of Open Access Journals (Sweden)

    Takashi Watanabe

    2011-01-01

    Full Text Available The purpose of this study is to develop wearable sensor system for gait evaluation using gyroscopes and accelerometers for application to rehabilitation, healthcare and so on. In this paper, simultaneous measurement of joint angles of lower limbs and stride length was tested with a prototype of wearable sensor system. The system measured the joint angles using the Kalman filter. Signals from the sensor attached on the foot were used in the stride length estimation detecting foot movement automatically. Joint angles of the lower limbs were measured with stable and reasonable accuracy compared to those values measured with optical motion measurement system with healthy subjects. It was expected that the stride length measurement with the wearable sensor system would be practical by realizing more stable measurement accuracy. Sensor attachment position was suggested not to affect significantly measurement of slow and normal speed movements in a test with the rigid body model. Joint angle patterns measured in 10 m walking with a healthy subject were similar to common patterns. High correlation between joint angles at some characteristic points and stride velocity were also found adequately. These results suggested that the wireless wearable inertial sensor system could detect characteristics of gait.

  8. Preliminary Investigations of Creep Strain of Neogene Clay from Warsaw in Drained Triaxial Tests Assisted by Computed Microtomography

    Science.gov (United States)

    Kaczmarek, Łukasz Dominik; Dobak, Paweł Józef; Kiełbasiński, Kamil

    2017-06-01

    The study concerns soil creep deformation in multistage triaxial stress tests under drained conditions. High resolution X-ray computed microtomography (XμCT) was involved in structure recognition before and after triaxial tests. Undisturbed Neogene clay samples, which are widespread in central Poland, were used in this study. XμCT was used to identify representative sample series and informed the detection and rejection of unreliable ones. Maximum deviatoric stress for in situ stress confining condition was equal 95.1 kPa. This result helped in the design of further multistage investigations. The study identified the rheological strain course, which can be broken down into three characterizations: decreasing creep strain rate, transitional constant creep velocity, and accelerating creep deformation. The study found that due to multistage creep loading, the samples were strengthened. Furthermore, there is a visibly "brittle" character of failure, which may be the consequence of the microstructure transformation as a function of time as well as collapse of voids. Due to the glacial tectonic history of the analyzed samples, the reactivation of microcracks might also serve as an explanation. The number of the various sizes of shear planes after failure is confirmed by XμCT overexposure.

  9. Development and preliminary testing of a web-based, self-help application for disaster-affected families.

    Science.gov (United States)

    Yuen, Erica K; Gros, Kirstin; Welsh, Kyleen E; McCauley, Jenna; Resnick, Heidi S; Danielson, Carla K; Price, Matthew; Ruggiero, Kenneth J

    2016-09-01

    Technology-based self-help interventions have the potential to increase access to evidence-based mental healthcare, especially for families affected by natural disasters. However, development of these interventions is a complex process and poses unique challenges. Usability testing, which assesses the ability of individuals to use an application successfully, can have a significant impact on the quality of a self-help intervention. This article describes (a) the development of a novel web-based multi-module self-help intervention for disaster-affected adolescents and their parents and (b) a mixed-methods formal usability study to evaluate user response. A total of 24 adolescents were observed, videotaped, and interviewed as they used the depressed mood component of the self-help intervention. Quantitative results indicated an above-average user experience, and qualitative analysis identified 120 unique usability issues. We discuss the challenges of developing self-help applications, including design considerations and the value of usability testing in technology-based interventions, as well as our plan for widespread dissemination.

  10. Aerobic exercise in adolescents with obesity: preliminary evaluation of a modular training program and the modified shuttle test

    Directory of Open Access Journals (Sweden)

    van der Baan-Slootweg Olga H

    2007-04-01

    Full Text Available Abstract Background Increasing activity levels in adolescents with obesity requires the development of exercise programs that are both attractive to adolescents and easily reproducible. The aim of this study was to develop a modular aerobic training program for adolescents with severe obesity, with a focus on variety, individual targets and acquiring physical skills. We report here the effects on aerobic fitness from a pilot study. Furthermore, we examined the feasibility of the modified shuttle test (MST as an outcome parameter for aerobic fitness in adolescents with severe obesity. Methods Fifteen adolescents from an inpatient body weight management program participated in the aerobic training study (age 14.7 ± 2.1 yrs, body mass index 37.4 ± 3.5. The subjects trained three days per week for 12 weeks, with each session lasting 30–60 minutes. The modular training program consisted of indoor, outdoor and swimming activities. Feasibility of the MST was studied by assessing construct validity, test-retest reliability and sensitivity to change. Results Comparing pretraining and end of training period showed large clinically relevant and significant improvements for all aerobic indices: e.g. VO2 peak 17.5%, effect size (ES 2.4; Wmax 8%, ES 0.8. In addition, a significant improvement was found for the efficiency of the cardiovascular system as assessed by the oxygen pulse (15.8%, ES 1.6. Construct validity, test-retest reliability and sensitivity to change of the MST were very good. MST was significantly correlated with VO2 peak (r = 0.79 and Wmax (r = 0.84 but not with anthropometric measures. The MST walking distance improved significantly by 32.5%, ES 2.5. The attendance rate at the exercise sessions was excellent. Conclusion This modular, varied aerobic training program has clinically relevant effects on aerobic performance in adolescents with severe obesity. The added value of our aerobic training program for body weight management programs

  11. Waste inventory and preliminary source term model for the Greater Confinement Disposal site at the Nevada Test Site

    Energy Technology Data Exchange (ETDEWEB)

    Chu, M.S.Y.; Bernard, E.A.

    1991-12-01

    Currently, there are several Greater Confinement Disposal (GCD) boreholes at the Radioactive Waste Management Site (RWMS) for the Nevada Test Site. These are intermediate-depth boreholes used for the disposal of special case wastes, that is, radioactive waste within the Department of Energy complex that do not meet the criteria established for disposal of high-level waste, transuranic waste, or low-level waste. A performance assessment is needed to evaluate the safety of the GCD site, and to examine the feasibility of the GCD disposal concept as a disposal solution for special case wastes in general. This report documents the effort in defining all the waste inventory presently disposed of at the GCD site, and the inventory and release model to be used in a performance assessment for compliance with the Environmental Protection Agency`s 40 CFR 191.

  12. Preliminary vibration, acoustic, and shock design and test criteria for components on the SRB, ET, and SSME

    Science.gov (United States)

    1976-01-01

    Specifications for vibration, acoustic and shock design for components and subassemblies on the External Tank (ET), Solid Rocket Booster (SRB), and Space Shuttle Main Engine (SSME). Included are vibration, acoustic, shock, transportation, handling, and acceptance test requirements and procedures. The space shuttle ET, SRB, and SSME have been divided into zones and subzones. Zones are designated primarily to assist in determining the applicable specifications. A subzone (General Specification) is available for use when the location of the component is known but component design and weight are not well defined. When the location, weight, and mounting configuration of the component are known, specifications for appropriate subzone weight ranges are available. Criteria for some specific components are also presented.

  13. DC Brushless Motor Control Design and Preliminary Testing for Independent 4-Wheel Drive Rev-11 Robotic Platform

    Directory of Open Access Journals (Sweden)

    Roni Permana Saputra

    2012-03-01

    Full Text Available This paper discusses the design of control system for brushless DC motor using microcontroller ATMega 16 that will be applied to an independent 4-wheel drive Mobile Robot LIPI version 2 (REV-11. The control system consists of two parts which are brushless DC motor control module and supervisory control module that coordinates the desired command to the motor control module. To control the REV-11 platform, supervisory control transmit the reference data of speed and direction of motor to control the speed and direction of each actuator on the platform REV-11. From the test results it is concluded that the designed control system work properly to coordinate and control the speed and direction of motion of the actuator motor REV-11 platform. 

  14. Crystal accumulation in the Hanford Waste Treatment Plant high level waste melter. Preliminary settling and resuspension testing

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Fowley, M. D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Miller, D. H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-05-01

    The full-scale, room-temperature Hanford Tank Waste Treatment and Immobilization Plant (WTP) High-Level Waste (HLW) melter riser test system was successfully operated with silicone oil and magnetite particles at a loading of 0.1 vol %. Design and construction of the system and instrumentation, and the selection and preparation of simulant materials, are briefly reviewed. Three experiments were completed. A prototypic pour rate was maintained, based on the volumetric flow rate. Settling and accumulation of magnetite particles were observed at the bottom of the riser and along the bottom of the throat after each experiment. The height of the accumulated layer at the bottom of the riser, after the first pouring experiment, approximated the expected level given the solids loading of 0.1 vol %. More detailed observations of particle resuspension and settling were made during and after the third pouring experiment. The accumulated layer of particles at the bottom of the riser appeared to be unaffected after a pouring cycle of approximately 15 minutes at the prototypic flow rate. The accumulated layer of particles along the bottom of the throat was somewhat reduced after the same pouring cycle. Review of the time-lapse recording showed that some of the settling particles flow from the riser into the throat. This may result in a thicker than expected settled layer in the throat.

  15. Preliminary testing by adults of a haptics-assisted robot platform designed for children with physical impairments to access play.

    Science.gov (United States)

    Sakamaki, Isao; Adams, Kim; Medina, Maria Fernanda Gomez; Cruz, Javier Leonardo Castellanos; Jafari, Nooshin; Tavakoli, Mahdi; Janz, Heidi

    2017-07-11

    Development of children's cognitive and perceptual skills depends heavily on object exploration and experience in their physical world. For children who have severe physical impairments, one of the biggest concerns is the loss of opportunities for meaningful play with objects, including physical contact and manipulation. Assistive robots can enable children to perform object manipulation through the control of simple interfaces. Touch sensations conveyed through haptic interfaces in the form of force reflection or force assistance can help a child to sense the environment and to control a robot. A robotic system with forbidden region virtual fixtures (VFs) was tested in an object sorting task. Three sorting tasks-by color, by shape, and by both color and shape-were performed by 10 adults without disability and one adult with cerebral palsy. Tasks performed with VFs were accomplished faster than tasks performed without VFs, and deviations of the motion area were smaller with VFs than without VFs. For the participant with physical impairments, two out of three tasks were slower with the VFs. This implies that forbidden region VFs are not always able to improve user task performance. Alignment with an individual's unique motion characteristics can improve VF assistance.

  16. Experience that much work produces many reinforcers makes the sunk cost fallacy in pigeons: A preliminary test

    Directory of Open Access Journals (Sweden)

    Shun eFujimaki

    2016-03-01

    Full Text Available The sunk cost fallacy is one of the irrational choice behaviors robustly observed in humans. This fallacy can be defined as a preference for a higher-cost alternative to a lower-cost one after previous investment in a higher-cost alternative. The present study examined this irrational choice by exposing pigeons to several types of trials with differently illuminated colors. We prepared three types of nonchoice trials for experiencing different outcomes after presenting same or different colors as alternatives and three types of choice trials for testing whether pigeons demonstrated irrational choice. In nonchoice trials, animals experienced either of the following: (1 no reinforcement after the presentation of an unrelated colored stimulus to the alternatives used in the choice situation, (2 no reinforcement after investment in the lower-cost alternative, or (3 reinforcement or no reinforcement after investment in the higher-cost alternative. In choice trials, animals were required to choose in the following three situations: (A higher-cost vs. lower-cost alternatives, (B higher-cost vs. lower-cost ones after some investment in the higher-cost alternative, and (C higher-cost vs. lower-cost alternatives after the presentation of an unrelated colored stimulus. From the definition of the sunk cost fallacy, we assumed that animals would exhibit this fallacy if they

  17. Developing and Testing the Effectiveness of a Novel Health Qigong for Frail Elders in Hong Kong: A Preliminary Study

    Directory of Open Access Journals (Sweden)

    Hector W. H. Tsang

    2013-01-01

    Full Text Available Eight-Section Brocades and Yijin Jing consist of some routine movements that are too difficult for frail elders. A novel health qigong protocol was developed and its effectiveness for frail elders was examined using a randomized clinical trial (RCT. An expert panel performed functional anatomy analysis and safety field test prior to the RCT. The experimental group (n=61, 83±6 yr was given a 12-week qigong exercise program, while the comparison group (n=55, 84±6 yr participated in a newspaper reading program with the same duration and frequency. Pre-, mid-, post-, and follow-up assessments were conducted. At 12 weeks, the qigong group had significant improvements in thinking operations (F=4.05, P=.02 and significant reduction of resting heart rate (F=3.14, P=.045 as compared to the newspaper reading group. A trend of improvements in grip strength and a decreasing trend of depression levels were observed among the qigong group. Significant perceived improvements in physical health (F=13.01, P=.001, activities of daily living (F=5.32, P=.03, and overall health status (F=15.26, P=.0001 were found. There are improvements in some aspects of psychosocial, cognitive, physical, and physiological domains. Clinical applications and possibilities for further research are discussed.

  18. Preliminary structural design and thermo-mechanical analysis of helium cooled solid breeder blanket for Chinese Fusion Engineering Test Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Li, Min; Chen, Hongli, E-mail: hlchen1@ustc.edu.cn; Zhou, Guangming; Liu, Qianwen; Wang, Shuai; Lv, Zhongliang; Ye, Minyou

    2015-02-15

    Highlights: • A helium cooled solid breeder blanket module was designed for CFETR. • Multilayer U-shaped pebble beds were adopted in the blanket module. • Thermal and thermo-mechanical analyses were carried out under normal operating conditions. • The analysis results were found to be acceptable. - Abstract: With the aim to bridge the R&D gap between ITER and fusion power plant, the Chinese Fusion Engineering Test Reactor (CFETR) was proposed to be built in China. The mission of CFETR is to address the essential R&D issues for achieving practical fusion energy. Its blanket is required to be tritium self-sufficient. In this paper, a helium cooled solid breeder blanket adopting multilayer U-shaped pebble beds was designed and analyzed. Thermo-mechanical analysis of the first wall and side wall combined with breeder unit was carried out for normal operating steady state conditions. The results showed that the maximum temperatures of the structural material, neutron multiplier and tritium breeder pebble beds are 523 °C, 558 °C and 787 °C, respectively, which are below the corresponding limits of 550 °C, 650 °C and 920 °C. The maximum equivalent stress of the structure is under the allowable value with a margin about 14.5%.

  19. Crystal accumulation in the Hanford Waste Treatment Plant high level waste melter. Preliminary settling and resuspension testing

    Energy Technology Data Exchange (ETDEWEB)

    Fox, K. M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Fowley, M. D. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Miller, D. H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-05-01

    The full scale, room temperature Hanford Tank Waste Treatment and Immobilization Plant (WTP) High-Level Waste (HLW) melter riser test system was successfully operated with silicone oil and magnetite particles at a loading of 0.1 vol %. Design and construction of the system and instrumentation, and the selection and preparation of simulant materials, are briefly reviewed. Three experiments were completed. A prototypic pour rate was maintained, based on the volumetric flow rate. Settling and accumulation of magnetite particles were observed at the bottom of the riser and along the bottom of the throat after each experiment. The height of the accumulated layer at the bottom of the riser, after the first pouring experiment, approximated the expected level given the solids loading of 0.1 vol %. More detailed observations of particle resuspension and settling were made during and after the third pouring experiment. The accumulated layer of particles at the bottom of the riser appeared to be unaffected after a pouring cycle of approximately 15 minutes at the prototypic flow rate. The accumulated layer of particles along the bottom of the throat was somewhat reduced after the same pouring cycle. Review of the time-lapse recording showed that some of the settling particles flow from the riser into the throat. This may result in a thicker than expected settled layer in the throat.

  20. Volcanic edifice alignment detection software in MATLAB: Test data and preliminary results for shield fields on Venus

    Science.gov (United States)

    Thomson, Bradley J.; Lang, Nicholas P.

    2016-08-01

    The scarcity of impact craters on Venus make it difficult to infer the relative ages of geologic units. Stratigraphic methods can be used to help infer the relative ordering of surface features, but the relatively coarse resolution of available radar data means ambiguity about the timing of certain features is common. Here we develop a set of statistical tools in MATLAB to help infer the relative timing between clusters of small shield volcanoes and sets of fractures in the surrounding terrain. Specifically, we employed two variants of the two-point azimuth method to detect anisotropy in the distribution of point-like features. The results of these methods are shown to successfully identify anisotropy at two spatial scales: at the whole-field level and at scales smaller than a set fraction of the mean value. Initial results on the test cases presented here are promising, at least for volcanic fields emplaced under uniform conditions. These methods could also be used for detecting anisotropy in other point-like geologic features, such as hydrothermal vents, springs, and earthquake epicenters.

  1. JPL's electric and hybrid vehicles project: Project activities and preliminary test results. [power conditioning and battery charge efficiency

    Science.gov (United States)

    Barber, T. A.

    1980-01-01

    Efforts to achieve a 100 mile urban range, to reduce petroleum usage 40% to 70%, and to commercialize battery technology are discussed with emphasis on an all plastic body, four passenger car that is flywheel assisted and battery powered, and on an all metal body, four passenger car with front wheel drive and front motor. For the near term case, a parallel hybrid in which the electric motor and the internal combustion engine may directly power the drive wheels, is preferred to a series design. A five passenger car in which the electric motor and the gasoline engine both feed into the same transmission is discussed. Upgraded demonstration vehicles were tested using advanced lead acid, nickel zinc, nickel iron, and zinc chloride batteries to determine maximum acceleration, constant speed, and battery behavior. The near term batteries demonstrated significant improvement relative to current lead acid batteries. The increase in range was due to improved energy density, and ampere hour capacity, with relatively 1 small weight and volume differences.

  2. Adolescents' Observations of Parent Pain Behaviors: Preliminary Measure Validation and Test of Social Learning Theory in Pediatric Chronic Pain.

    Science.gov (United States)

    Stone, Amanda L; Walker, Lynn S

    2017-01-01

    Evaluate psychometric properties of a measure of adolescents’ observations of parental pain behaviors and use this measure to test hypotheses regarding pain-specific social learning. We created a proxy-report of the Patient Reported Outcomes Measurement Information System (PROMIS) Pain Behavior–Short Form (PPB) for adolescents to report on parental pain behaviors, which we labeled the PPB-Proxy. Adolescents (n = 138, mean age = 14.20) with functional abdominal pain completed the PPB-Proxy and a parent completed the PPB. Adolescents and their parents completed measures of pain and disability during the adolescent’s clinic visit for abdominal pain. Adolescents subsequently completed a 7-day pain diary period. The PPB-Proxy moderately correlated with the PPB, evidencing that adolescents observe and can report on parental pain behaviors. Both the PPB-Proxy and PPB significantly correlated with adolescents’ pain-related disability. Parental modeling of pain behaviors could represent an important target for assessment and treatment in pediatric chronic pain patients.

  3. Fish multigeneration test with preliminary short-term reproduction assay for estrone using Japanese medaka (Oryzias latipes).

    Science.gov (United States)

    Nakamura, Ataru; Tamura, Ikumi; Takanobu, Hitomi; Yamamuro, Masumi; Iguchi, Taisen; Tatarazako, Norihisa

    2015-01-01

    The most potent chemicals potentially causing adverse effects on fish species are estrogens in human waste.Sewage is a source of these estrogens and it is difficult to reduce. In particular, although the bioactivity of estrone is estimated to be about half of that of estradiol, multiple studies report that more than 100 ng l(–1) of estrone can be detected in urban rivers, including discharges from sewage treatment works; approximately two times as high as estradiol. Few studies have been conducted to investigate the long-term effects of estrone on wildlife; therefore, we conducted fish multigeneration test using Japanese medaka (Oryzias latipes). Medaka were exposed to estrone for 27 weeks across three generations in environmentally relevant concentrations, being 5.74, 11.4, 24.0, 47.1 and 91.4 ng l(–1). No effects on reproduction were observed in the first generation; however, a decline in egg production and fertility was observed in the second generation exposed to 91.4 ng l(–1) estrone, which is lower than some known environmental concentrations in urban environments. Furthermore, histopathological abnormalities were observed in the third generation exposed to both 47.1 and 91.4 ng l(–1), suggesting that estrone possibly exerts severe effects on the third or later generations. However, appearances of testis–ova were observed in the second and third generation they were not consistent with actual effects on reproduction, notwithstanding the testis-ovais regarded as the key evidence for endocrine disruption. Accordingly, we consider that qualitative measurement of abnormalities using histopathological observations is required for appropriate evaluation of endocrine disruption.

  4. 非烧蚀型防热材料烧蚀性能初步试验研究%Preliminary tests of non-ablative thermal protection materials

    Institute of Scientific and Technical Information of China (English)

    刘初平; 孟松鹤; 杜百合; 王国林

    2009-01-01

    介绍了在CARDC等离子体风洞中开展的非烧蚀型防热材料超高温陶瓷(UHTC)的试验研究结果.对Φ20mm平头圆柱体试验模型,采用亚声速驻点试验技术,在驻点热流478W/cm2,气流焓值27.9MJ/kg,环境压力18kPa条件下,分别对代号C(15、10)型、Y型、S(30、15、10)型3种材料模型进行了试验研究,并对模型试验前后的长度变化、质量变化以及模型表面温度进行了测量,初步分析了模型的表观变化、抗氧化特性和表面辐射特性.结果表明:Y型模型试验前后表观变化不大,表面温度达到1930℃;S型模型表面生成一层薄氧化层,稳定情形下模型表面温度达到1964℃;C型模型表面烧蚀严重,模型表面温度达到2462℃,防热性能最差.%The test results of non-ablative ultra-high temperature ceramic materials (UHTC) in one of the plasma wind tunnels of CARDC are introduced in this paper. Three types of materials, namely model C (15、10) ,Y and S(30、15、10),were tested under a subsonic condition with stagnation point heat flux of 478W/ cm2,enthalpy of 27.9 MJ/kg and stagnation point pressure of 18kPa. The test models were in flat cylinder shape with a diameter of 20mm. The length variation and mass loss and surface temperature of each test model were measured .Test results showed that model Y surface temperature reached 1930℃ with little surface char-acteristics change,model S surface temperature reached 1964℃ with an oxidation layer formed and model C surface temperature reached 2462℃ yet experienced severe ablation. Preliminary analyses of the tested materi-als in terms of surface characteristics change, anti-oxidation characteristics and surface radiation characteristics are also presented.

  5. Preliminary Sensorimotor and Cardiovascular Results from the Joint Russian/U.S. Pilot Field Test in Preparation for the Full Field Test

    Science.gov (United States)

    Reschke, M. F.; Kozlovskaya, I. B.; Tomilovskaya, E. S.; Bloomberg, J. J.; Platts, S. H.; Rukavishnikov, I. V.; Fomina, E. V.; Stenger, M. B.; Lee, S. M. C.; Wood, S. J.; Mulavara, A. P.; Feiveson, A. H.; Cerisano, J. M..; Kofman, I. S.; Fisher, E. A.

    2014-01-01

    Ongoing collaborative research efforts between NASA's Neuroscience and Cardiovascular Laboratories, and the Institute of Biomedical Problems' (IBMP) Sensory-Motor and Countermeasures Laboratories have been measuring functional sensorimotor, cardiovascular and strength responses following bed rest, dry immersion, short-duration (Space Shuttle) and long-duration (Mir and International Space Station [ISS]) space flights. While the unloading paradigms associated with dry immersion and bed rest does serve as acceptable flight analogs, testing of crew responses following the long-duration flights previously has not been possible until a minimum of 24 hours after landing. As a result, it is not possible to estimate the nonlinear trend of the early (physiologic data (orthostatic responses) are required to provide an evidence base for characterizing programmatic risks and the degree of variability among crewmembers for exploration missions where the crew will be unassisted af

  6. Characterize Behaviour of Emerging Pollutants in Artificial Recharge: Column Experiments - Experiment Design and Results of Preliminary Tests

    Science.gov (United States)

    Wang, H.; Carrera, J.; Ayora, C.; Licha, T.

    2012-04-01

    Emerging pollutants (EPs) have been detected in water resources as a result of human activities in recent years. They include pharmaceuticals, personal care products, dioxins, flame retardants, etc. They are a source of concern because many of them are resistant to conventional water treatment, and they are harmful to human health, even in low concentrations. Generally, this study aims to characterize the behaviour of emerging pollutants in reclaimed water in column experiments which simulates artificial recharge. One column set includes three parts: influent, reactive layer column (RLC) and aquifer column (AC). The main influent is decided to be Secondary Effluent (SE) of El Prat Wastewater Treatment Plant, Barcelona. The flow rate of the column experiment is 0.9-1.5 mL/min. the residence time of RLC is designed to be about 1 day and 30-40 days for AC. Both columns are made of stainless steel. Reactive layer column (DI 10cm * L55cm) is named after the filling material which is a mixture of organic substrate, clay and goethite. One purpose of the application of the mixture is to increase dissolve organic carbon (DOC). Leaching test in batchs and columns has been done to select proper organic substrate. As a result, compost was selected due to its long lasting of releasing organic matter (OM). The other purpose of the application of the mixture is to enhance adsorption of EPs. Partition coefficients (Kow) of EPs indicate the ability of adsorption to OM. EPs with logKow>2 could be adsorbed to OM, like Ibuprofen, Bezafibrate and Diclofenac. Moreover, some of EPs are charged in the solution with pH=7, according to its acid dissociation constant (Ka). Positively charged EPs, for example Atenolol, could adsorb to clay. In the opposite, negatively charged EPs, for example Gemfibrozil, could adsorb to goethite. Aquifer column (DI 35cm * L1.5m) is to simulate the processes taking place in aquifer in artificial recharge. The filling of AC has two parts: silica sand and

  7. A Low-Cost Point-of-Care Testing System for Psychomotor Symptoms of Depression Affecting Standing Balance: A Preliminary Study in India

    Directory of Open Access Journals (Sweden)

    Arindam Dutta

    2013-01-01

    Full Text Available The World Health Organization estimated that major depression is the fourth most significant cause of disability worldwide for people aged 65 and older, where depressed older adults reported decreased independence, poor health, poor quality of life, functional decline, disability, and increased chronic medical problems. Therefore, the objectives of this study were (1 to develop a low-cost point-of-care testing system for psychomotor symptoms of depression and (2 to evaluate the system in community dwelling elderly in India. The preliminary results from the cross-sectional study showed a significant negative linear correlation between balance and depression. Here, monitoring quantitative electroencephalography along with the center of pressure for cued response time during functional reach tasks may provide insights into the psychomotor symptoms of depression where average slope of the Theta-Alpha power ratio versus average slope of baseline-normalized response time may be a candidate biomarker, which remains to be evaluated in our future clinical studies. Once validated, the biomarker can be used for monitoring the outcome of a comprehensive therapy program in conjunction with pharmacological interventions. Furthermore, the frequency of falls can be monitored with a mobile phone-based application where the propensity of falls during the periods of psychomotor symptoms of depression can be investigated further.

  8. Preliminary assessment of terrestrial microalgae isolated from lichens as testing species for environmental monitoring: lichen phycobionts present high sensitivity to environmental micropollutants.

    Science.gov (United States)

    Domínguez-Morueco, N; Moreno, H; Barreno, E; Catalá, M

    2014-01-01

    Bioassays constitute a tool for pollution analysis providing a holistic approach and high-quality indication of the toxicity. Microbioassays allow evaluating the toxicity of many samples, implying lower costs and enabling routine monitoring and pollution control. But tests conducted so far are limited to the use of a small number of taxa. Lichens are excellent bioindicators of pollution with great ecological significance. Studies show that the phycobiont is more sensitive to pollutants than the mycobiont. Phycobiont have features such as adaptation to anhydrobiosis and relatively rapid growth in vitro, making them suitable for microbioassays. Our aim is to determine the sensitivity of phycobionts to the pharmaceutical micropollutants carbamazepine and diclofenac as a preliminary step for the development of a toxicity microbioassay based on phycobionts. Optical dispersion and chlorophyll autofluorescence were used as endpoints of toxicity on two algal species showing that suspensions present cyclic and taxon specific patterns of aggregation. Trebouxia TR9 suspensions present a very high grade of aggregation while Asterochloris erici cells do not. Both micropollutants alter optical properties of the suspensions of both species. No significant alteration of chlorophyll autofluorescence by carbamazepine is observed. A. erici chlorophyll autofluorescence is extremely sensitive to diclofenac but the effect is not dependent on the drug concentration or on the time of exposure. Differently, TR9 only shows punctual chlorophyll alterations. Fluctuations in optical dispersion may indicate changes in the population structure of the species, including reproductive strategy. A. erici seems more sensitive to micropollutants, is better characterized and is available from commercial collections.

  9. Preliminary Results of an On-Line, Multi-Spectrometer Fission Product Monitoring System to Support Advanced Gas Reactor Fuel Testing and Qualification in the Advanced Test Reactor at the Idaho National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Dawn M. Scates; John K. Hartwell; John B. Walter; Mark W. Drigert

    2007-10-01

    The Advanced Gas Reactor -1 (AGR-1) experiment is the first experiment in a series of eight separate low enriched uranium (LEU) oxycarbide (UCO) tri-isotropic (TRISO) particle fuel (in compact form) experiments scheduled for placement in the Advanced Test Reactor (ATR) located at the Idaho National Laboratory (INL). The experiment began irradiation in the ATR with a cycle that reached full power on December 26, 2006 and will continue irradiation for about 2.5 years. During this time six separate capsules, will be irradiated in an inert sweep gas atmosphere with individual on-line fission product monitoring on its effluent to track performance of the fuel in each individual capsule during irradiation. The goals of the irradiation experiment is to provide irradiation performance data to support fuel process development, to qualify fuel for normal operating conditions, to support development and validation of fuel, and to provide irradiated fuel and materials for post irradiation examination (PIE) and safety testing. This paper presents the preliminary test details of the fuel performance, as measured by the control and acquisition software.

  10. Habitual pelvic posture and time spent sitting: Measurement test-retest reliability for the LUMOback device and preliminary evidence for slouched posture in individuals with low back pain.

    Science.gov (United States)

    Takasaki, Hiroshi

    2017-01-01

    It has been difficult to monitor the pelvic position during actual daily life. However, recent developments in wearable device technologies, such as the LUMOback device, provide the possibility to evaluate habitual pelvic posture and time spent sitting during daily life. The current study aimed (1) to investigate test-retest reliability for habitual pelvic posture and time spent sitting with the LUMOback in individuals with prolonged low back pain (low back pain group) and without low back pain (control group), and (2) to preliminarily investigate differences in those measures between groups. Fifteen individuals in each group wore the LUMOback daily for 2 weeks. Intraclass correlation coefficients were calculated in each group by comparing the mean from the first week with the mean from the second week: (1) for the posture score, which is a proportion of time with neutral posture, and (2) for time spent sitting. The two measures for the first week were compared between the low back pain and control groups. The intraclass correlation coefficients for the posture score were .82 in the low back pain group and .91 in the control group. The intraclass correlation coefficients for time spent sitting were .75 in the low back pain group and .85 in the control group. The posture score in the low back pain group (mean ± SD: 37.5% ± 10.3%) was less than that in the control group (49.6% ± 6.0%; p  .05). The current study found (1) acceptable test-retest reliability for the posture score and time spent sitting evaluated by the LUMOback device, and (2) preliminary evidence of a difference in the posture score, indicating a more slouched lumbopelvic posture in individuals with prolonged low back pain than those without low back pain.

  11. The Disposition of Silver Released from Soviet Oblako Rockets in Precipitation during the Hall Suppression Experiment Grossversuch IV. Part I: Measurements of Background and a Preliminary Seeding Test.

    Science.gov (United States)

    Lacaux, J.-P.; Warburton, J. A.

    1980-07-01

    In association with Grossversuch IV, a program designed to test the Soviet hail suppression method by seeding clouds with AgI from Oblako rockets, a complementary program was conducted by l'Observatoire du Puy-de-Dôme and the Desert Research Institute to study the diffusion of the seeding material (AgI) in the clouds, based on the analysis of silver in precipitation. This program covered the summers of 1977 and 1978, and this paper describes the results of measurements of natural background silver concentrations in unseeded precipitation. It also describes a new automatic precipitation collector, five of which were first tested in the field in 1977. A more extensive network of 15 collectors was deployed during two months of the 1978 summer.Based on the analysis of 118 unseeded precipitation samples collected in 1977, the natural background concentration of silver was estimated as 0.9 × 1011 g mL1( = 0.6 × 1011 g mL1). Although the standard deviations overlap, the 1978 season results appear to indicate a lower background of 0.5 × 1011 g mL1 ( = 0.3 × 1011 g mL1), based on the analysis of 414 rain samples. The average value for the two seasons was 0.6 × 1011 g mL1 with a standard deviation of 0.5 × 1011 g mL1. These background concentrations were found to be independent of both the length of sampling period and the precipitation intensity, averaged over the sampling periods of the collectors.The background is sufficiently low to permit the detection of the presence of silver iodide emitted from the Soviet rockets in the precipitation. The preliminary results from one case study are presented to support this conclusion.

  12. Preliminary Results from the Joint Russian and US Field Test: Measurement of Sensorimotor and Cardiovascular Responses Immediately Following Landing of the Soyuz Spacecraft

    Science.gov (United States)

    Reschke, M. F.; Kozlovskaya, I. B.; Tomilovskaya, E. S.; Bloomberg, J. J.; Platts, S. H.; Rukavishnikov, I. V.; Fomina, E. V.; Stenger, M. B.; Lee, S. M. C.; Wood, S. J.; Mulavara, A. P.; Fieveson, A. H.; Cerisano, J. M.; Kofman, I. S.; Fisher, E. A.

    2013-01-01

    Ongoing collaborative research efforts between NASA's Neuroscience and Cardiovascular Laboratories, and the Institute of Biomedical Problems' (IBMP) Sensory-Motor and Countermeasures Laboratories have been measuring functional sensorimotor, cardiovascular and strength responses following bed rest, dry immersion, short duration (Space Shuttle) and long duration (Mir and International Space Station) space flights. While the unloading paradigms associated with dry immersion and bed rest have do serve as acceptable flight analogs, testing of crew responses following the long duration flights does not begin until a minimum of 24 hours after landing. As a result it is not possible to estimate the nonlinear trend of the early (assess the full impact of the decrements associated with long duration flight. To overcome these limitations both the Russian and U.S. sides have implemented testing at the time of landing and before the flight crews have left the landing site. By joint agreement this research effort has been identified as the functional Field Test (FT). For practical reasons the FT has been divided into two phases: the full FT and a preliminary pilot version (PFT) of the FT that is reduced in both length and scope. The primary goal of this research is to determine functional abilities in long duration space flight crews beginning as soon after landing as possible (assessment of hand/eye coordination, ability to egress from a seated position, walk normally without falling, measurement of dynamic visual acuity, ability to discriminate different forces generated with both the hands and legs, recovery from a fall, a coordinated walk involving tandem heel-to-toe placement and determination of postural ataxia while standing. The cardiovascular portion of the investigation includes blood pressure and heart rate measurements during a timed stand test in conjunction with postural ataxia testing. In addition to the immediate post-landing collection of data for the full FT

  13. Preliminary Characterization Tests of Detectors of on-Line Monitor Systems of the Italian National Center of Oncological Hadron-Therapy (CNAO

    Directory of Open Access Journals (Sweden)

    Abdolkazem Ansarinejad

    2013-03-01

    Full Text Available Introduction Hadron-therapy is an effective technique used to treat tumors that are located between or nearby vital organs. The Italian National Center of Oncological Hadron-therapy (CNAO has been realized as the first facility in Italy to treat very difficult tumors with protons and Carbon ions. The on-line monitor system for CNAO has been developed by the Department of Physics of the University of Torino and Italian National Institute of Nuclear Physics (INFN. The monitoring system performs the on-line checking of the beam intensity, dimension, and beam position. Materials and Methods The monitor system is based on parallel plate ionization chambers and is composed of five ionization chambers with the anodes fully integrated or segmented in pixels or strips that are placed in two boxes. A series of measurements were performed that involve the background current and the detectors have been characterized by means of a series of preliminary testes in order to verify reproducibility and uniformity of the chambers using an X-ray source. Results The measured background currents for StripX, StripY and Pixel chambers are five orders of magnitude smaller than the nominal treatment current. The reproducibility error of chambers is less than 1%. The analysis of the uniformity showed that the monitor devices have a spread in gain that varies, but only about 2%. Conclusion The reproducibility and the uniformity values are considered as a good result, taking into account that the X-ray energy range is several orders of magnitude smaller than the particle energies used at CNAO.

  14. Training doctors briefly and in situ to involve their patients in making medical decisions-Preliminary testing of a newly developed module.

    Science.gov (United States)

    Kasper, Jürgen; Liethmann, Katrin; Heesen, Christoph; Reissmann, Daniel R; Geiger, Friedemann

    2017-05-18

    To carry out preliminary evaluation of a training module for doctors to enhance their ability to involve their patients in medical decision making. The training refers to the shared decision-making (SDM) communication concept. The training module includes a comprehensive manual, a corresponding video tutorial with communication examples and a 15-minute face-to-face feedback session based on an SDM analysis of a consultation recording provided by the trainee. Ten trainees (four neurologists, three dentists, and three general practitioners) participating in the pretest each recorded four clinical consultations (total sample: N=40) and received three training components. After the training, doctors provided feedback on the module's feasibility in a questionnaire. Communication performance of doctors, patients and doctor-patient dyads was assessed by trained observers and self-assessed by doctors and patients using the MAPPIN'SDM approach. Training effects were determined using Wilcoxon signed-rank tests comparing baseline values with post-intervention performance as assessed in the fourth consultations. The face-to-face training sessions were short and feasible with regard to clinical reality. Participants considered the training supportive for acquiring SDM skills and recommended more emphasis on the face-to-face feedback. Communication improved according to observers rating doctors (P=.05) and doctor-patient dyads (P=.07) and to doctors' own judgements (P=.02). No improvement was observed in patients' SDM behaviour (P=.11); accordingly, patients' judgements did not indicate improvement (P=.14). The training is designed to meet clinicians' needs. Improvement of risk communication after training encourages optimization according to doctors' feedback. Following this study, the efficacy of the training is now being examined in a randomized controlled trial. © 2017 The Authors Health Expectations Published by John Wiley & Sons Ltd.

  15. PRELIMINARY RESULTS OF THE AGC-4 IRRADIATION IN THE ADVANCED TEST REACTOR AND DESIGN OF AGC-5 (HTR16-18469)

    Energy Technology Data Exchange (ETDEWEB)

    Davenport, Michael; Petti, D. A.

    2016-11-01

    The United States Department of Energy’s Advanced Reactor Technologies (ART) Program will irradiate up to six nuclear graphite creep experiments in the Advanced Test Reactor (ATR) located at the Idaho National Laboratory (INL). The graphite experiments are being irradiated over an approximate eight year period to support development of a graphite irradiation performance data base on the new nuclear grade graphites now available for use in high temperature gas reactors. The goals of the irradiation experiments are to obtain irradiation performance data, including irradiation creep, at different temperatures and loading conditions to support design of the Very High Temperature Gas Reactor (VHTR), as well as other future gas reactors. The experiments each consist of a single capsule that contain six stacks of graphite specimens, with half of the graphite specimens in each stack under a compressive load, while the other half of the specimens are not be subjected to a compressive load during irradiation. The six stacks have differing compressive loads applied to the top half of diametrically opposite pairs of specimen stacks. A seventh specimen stack in the center of the capsule does not have a compressive load. The specimens are being irradiated in an inert sweep gas atmosphere with on-line temperature and compressive load monitoring and control. There are also samples taken of the sweep gas effluent to measure any oxidation or off-gassing of the specimens that may occur during initial start-up of the experiment. The first experiment, AGC-1, started its irradiation in September 2009, and the irradiation was completed in January 2011. The second experiment, AGC-2, started its irradiation in April 2011 and completed its irradiation in May 2012. The third experiment, AGC-3, started its irradiation in late November 2012 and completed in the April of 2014. AGC-4 is currently being irradiated in the ATR. This paper will briefly discuss the preliminary irradiation results

  16. Preliminary study of the behavioral and biological effects of high intensity 60 Hz electric fields. Quarterly technical progress report, No. 1. [Development and testing of experimental protocols and apparatus

    Energy Technology Data Exchange (ETDEWEB)

    1978-08-01

    The major objective of this preliminary study is to develop and thoroughly test the experimental protocols and apparatus, which are planned for a major study of the behavioral and biological effects of high intensity 60 Hz electric fields. The behavior of baboons will be observed before, during, and after exposure to 60 Hz electric fields at a maximum intensity of 60 kV/m. Both individual performance (operant conditioning) and social behavior will be examined. The preliminary study will differ from the planned major study as follows: subjects will be used as their own controls; a smaller number of subjects will be run; field intensity will not be varied; the electric field should be non-uniform; the preliminary study exposure facility will be basically an outdoor facility; to avoid deterioration of plastic materials, the high intensity fields will not be turned on during or just after rainfall; and in the preliminary study the biological work will be restricted to the clinical determination of the health of subjects before and after exposure. The present report is the first of three quarterly technical progress reports. It covers approximately the first two and one-half months of activity and, therefore, consists primarily of plans. The report addresses four major areas: the high intensity field exposure facility; the field measurement instrumentation; the operation conditioning equipment; and experimental methods including experimental design and data analysis.

  17. The Development of a Long-Term, Continually Updated Global Solar Resource at 10 km Resolution: Preliminary Results From Test Processing and Continuing Plans

    Science.gov (United States)

    Stackhouse, P.; Perez, R.; Sengupta, M.; Knapp, K.; Cox, Stephen; Mikovitz, J. Colleen; Zhang, T.; Hemker, K.; Schlemmer, J.; Kivalov, S.

    2014-01-01

    Background: Considering the likelihood of global climatic weather pattern changes and the global competition for energy resources, there is an increasing need to provide improved and continuously updated global Earth surface solar resource information. Toward this end, a project was funded under the NASA Applied Science program involving the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC), National Renewable Energy Laboratory (NREL), the State University of New York/Albany (SUNY) and the NOAA National Climatic Data Center (NCDC) to provide NREL with a global long-term advanced global solar mapping production system for improved depiction of historical solar resources and variability and to provide a mechanism for continual updates of solar resource information. This new production system is made possible by the efforts of NOAA and NASA to completely reprocess the International Satellite Cloud Climatology Project (ISCCP) data set that provides satellite visible and infrared radiances together with retrieved cloud and surface properties on a 3-hourly basis beginning from July 1983. The old version of the ISCCP data provided this information for all the world TMs available geosynchronous satellite systems and NOAA TMs AVHRR data sets at a 30 km effective resolution. This new version aims to provide a new and improved satellite calibration at an effective 10 km resolution. Thus, working with SUNY, NASA will develop and test an improved production system that will enable NREL to continually update the Earth TM solar resource. Objective and Methods: In this presentation, we provide a general overview of this project together with samples of the new solar irradiance mapped data products and comparisons to surface measurements at various locations across the world. An assessment of the solar resource values relative to calibration uncertainty and assumptions are presented. Errors resulting assumptions in snow cover and background aerosol

  18. Test

    DEFF Research Database (Denmark)

    Bendixen, Carsten

    2014-01-01

    Bidrag med en kortfattet, introducerende, perspektiverende og begrebsafklarende fremstilling af begrebet test i det pædagogiske univers.......Bidrag med en kortfattet, introducerende, perspektiverende og begrebsafklarende fremstilling af begrebet test i det pædagogiske univers....

  19. Environmental pollen trapped by tobacco leaf as indicators of the provenance of counterfeit cigarette products: a preliminary investigation and test of concept.

    Science.gov (United States)

    Donaldson, Margaret P; Stephens, William E

    2010-05-01

    The global trade in counterfeit tobacco products is increasingly taking market share from legal brands in many parts of the developed world, with attendant adverse economic, health, criminal, and other societal impacts. Knowing the geographical source is central to developing new strategies for curbing this illicit trade, and here, the potential of environmental pollen extracted from manufactured cigarettes is examined. Two samples representing U.S. and Chinese brands were investigated for their pollen content. Results indicate that tobacco leaf very efficiently captures environmental pollen (about 1800 and 12,600 grains per cigarette, respectively) with no detectable self-contamination by the tobacco plant. In both cases, the flora is typical of open space environments, but pollen type counts indicate very different distributions of species. This preliminary investigation indicates that palynology has the potential to constrain geographical source(s) of tobacco, particularly if regionally localized species can be recognized among the pollen.

  20. Preliminary Tests of the DECRIS-4 Ion Source%DECRIS-4离子源的初步测试结果

    Institute of Scientific and Technical Information of China (English)

    V.Bekhterev; S.Bogomolov; A.Efremov; G.Gulbekian; Yu.Kostyukhov; A.Lebedev; M.Leporis; V.Loginov; N.Yazvitsky

    2007-01-01

    The ECR ion source DECRIS一4 has been designed and constructed at the FLNR JINR to be used as a second injector of heavy multiply charged ions for the U-400 cyclotron.The design of the magnetic structure of the source was based on the idea of the so-called"magnetic plateau".The axial magnetic field is formed by three independent solenoids enclosed in separated iron yokes.As a result the superposition of the coils and hexapole magnetic fields creates the enlarged resonance volume.The first experiments showed that the source was able to produce more than 300eμA of Ar8+ when only 100W of microwave power was used.During the last experiment almost 500eμA of Ar8+ was extracted with the same power.In this paper we will present the preliminary results with other gaseous ions,such as oxygen,krypton and xenon.

  1. Clients of sex workers in Switzerland: it makes sense to counsel and propose rapid test for HIV on the street, a preliminary report

    Directory of Open Access Journals (Sweden)

    Ansermet-Pagot Anne

    2010-03-01

    Full Text Available Abstract Background Clients of street sex workers may be at higher risk for HIV infection than the general population. Furthermore, there is a lack of knowledge regarding HIV testing of clients of sex workers in developed countries. Method This pilot study assessed the feasibility and acceptance of rapid HIV testing by the clients of street-based sex workers in Lausanne, Switzerland. For 5 evenings, clients in cars were stopped by trained field staff for face-to-face interviews focusing on sex-related HIV risk behaviors and HIV testing history. The clients were then offered a free anonymous rapid HIV test in a bus parked nearby. Rapid HIV testing and counselling were performed by experienced nurse practitioners. Clients with reactive tests were offered confirmatory testing, medical evaluation, and care in our HIV clinic. Result We intercepted 144 men, 112 (77.8% agreed to be interviewed. Among them, 50 (46.6% had never been tested for HIV. A total of 31 (27.7% rapid HIV tests were performed, 16 (51.6% in clients who had not previously been tested. None were reactive. Initially, 19 (16.9% additional clients agreed to HIV testing but later declined due to the 40-minute queue for testing. Conclusion This pilot study showed that rapid HIV testing in the red light district of Lausanne was feasible, and that the clients of sex workers accepted testing at an unexpectedly high rate. This setting seems particularly appropriate for targeted HIV screening, since more than 40% of the clients had not previously been tested for HIV even though they engaged in sex-related HIV risk behaviour.

  2. Preliminary Monthly Climatological Summaries

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Preliminary Local Climatological Data, recorded since 1970 on Weather Burean Form 1030 and then National Weather Service Form F-6. The preliminary climate data pages...

  3. The Scheme and the Preliminary Test of Object-Oriented Simultaneous 3D Geometric and Physical Change Detection Using GIS-guided Knowledge

    Directory of Open Access Journals (Sweden)

    Chang LI

    2013-07-01

    Full Text Available Current methods of remotely sensed image change detection almost assume that the DEM of the surface objects do not change. However, for the geological disasters areas (such as: landslides, mudslides and avalanches, etc., this assumption does not hold. And the traditional approach is being challenged. Thus, a new theory for change detection needs to be extended from two-dimensional (2D to three-dimensional (3D urgently. This paper aims to present an innovative scheme for change detection method, object-oriented simultaneous three-dimensional geometric and physical change detection (OOS3DGPCD using GIS-guided knowledge. This aim will be reached by realizing the following specific objectives: a to develop a set of automatic multi-feature matching and registration methods; b to propose an approach for simultaneous detecting 3D geometric and physical attributes changes based on the object-oriented strategy; c to develop a quality control method for OOS3DGPCD; d to implement the newly proposed OOS3DGPCD method by designing algorithms and developing a prototype system. For aerial remotely sensed images of YingXiu, Wenchuan, preliminary experimental results of 3D change detection are shown so as to verify our approach.

  4. IN-VIVO DIAGNOSIS OF CHEMICALLY INDUCED MELANOMA IN AN ANIMAL MODEL USING UV-VISIBLE AND NIR ELASTIC SCATTERING SPECTROSCOPY: PRELIMINARY TESTING.

    Energy Technology Data Exchange (ETDEWEB)

    C. A' AMAR; R. LEY; ET AL

    2001-01-01

    Elastic light scattering spectroscopy (ESS) has the potential to provide spectra that contain both morphological and chromophore information from tissue. We report on a preliminary study of this technique, with the hope of developing a method for diagnosis of highly-pigmented skin lesions, commonly associated with skin cancer. Four opossums were treated with dimethylbenz(a)anthracene to induce both malignant melanoma and benign pigmented lesions. Skin lesions were examined in vivo using both UV-visible and near infrared (NIR) ESS, with wavelength ranges of 330-900 nm and 900-1700 nm, respectively. Both portable systems used identical fiber-optic probe geometry throughout all of the measurements. The core diameters for illuminating and collecting fibers were 400 and 200 {micro}m, respectively, with center-to-center separation of 350 {micro}m. The probe was placed in optical contact with the tissue under investigation. Biopsies from lesions were analyzed by two standard histopathological procedures. Taking into account only the biopsied lesions, UV-visible ESS showed distinct spectral correlation for 11/13 lesions. The NIR-ESS correlated well with 12/13 lesions correctly. The results of these experiments showed that UV-visible and NIR-ESS have the potential to classify benign and malignant skin lesions, with encouraging agreement to that provided by standard histopathological examination. These initial results show potential for ESS based diagnosis of pigmented skin lesions, but further trials are required in order to substantiate the technique.

  5. Interpretation of non-invasive breath tests using 13C-labeled substrates - a preliminary report with 13C-methacetin

    Directory of Open Access Journals (Sweden)

    Lock JF

    2009-12-01

    Full Text Available Abstract Non-invasive breath tests can serve as valuable diagnostic tools in medicine as they can determine particular enzymatic and metabolic functions in vivo. However, methodological pitfalls have limited the actual clinical application of those tests till today. A major challenge of non-invasive breath tests has remained the provision of individually reliable test results. To overcome these limitations, a better understanding of breath kinetics during non-invasive breaths tests is essential. This analysis compares the breath recovery of a 13C-methacetin breath test with the actual serum kinetics of the substrate. It is shown, that breath and serum kinetics of the same test are significantly different over a period of 60 minutes. The recovery of the tracer 13CO2 in breath seems to be significantly delayed due to intermediate storage in the bicarbonate pool. This has to be taken into account for the application of non-invasive breath test protocols. Otherwise, breath tests might display bicarbonate kinetics despite the metabolic capacity of the particular target enzyme.

  6. A ground-based magnetic survey of Frenchman Flat, Nevada National Security Site and Nevada Test and Training Range, Nevada: data release and preliminary interpretation

    Science.gov (United States)

    Phillips, Jeffrey D.; Burton, Bethany L.; Curry-Elrod, Erika; Drellack, Sigmund

    2014-01-01

    The Nevada National Security Site (NNSS, formerly the Nevada Test Site) is located in southern Nevada approximately 105 kilometers (km) (65 miles) northwest of Las Vegas. Frenchman Flat is a sedimentary basin located on the eastern edge of NNSS and extending eastward into the adjacent Nevada Test and Training Range (NTTR).

  7. The use of the Color Trails Test in the assessment of driver competence: preliminary report of a culture-fair instrument.

    Science.gov (United States)

    Elkin-Frankston, Seth; Lebowitz, Brian K; Kapust, Lissa R; Hollis, Ann M; O'Connor, Margaret G

    2007-06-01

    Studies have shown that the Trail Making Test (TMT) predicts real-world driving performance in individuals who have cognitive deficits. However, because this test requires knowledge of the Latin alphabet, the TMT may not be appropriate for individuals who are illiterate or for those whom English is not their primary language. Because the Color Trails Test (CTT) is not influenced by knowledge of the alphabet, the CTT may be a culture-fair alternative to the TMT. To date, the utility of the CTT in the evaluation of driver competence has not been established. In the current study, individuals referred for a comprehensive driving assessment underwent testing with the TMT and CTT. The results suggest that the CTT and the TMT provide similar information regarding road-test outcome. Thus, the CTT may be a culture-fair alternative to the TMT in the assessment of driver competence.

  8. Design and preliminary test of a fluidised bed photoreactor for ethylene oxidation on mesoporous mixed SiO2/TiO2 nanocomposites under UV-A illumination

    Directory of Open Access Journals (Sweden)

    Maria Lucia V. de Chiara

    2014-12-01

    Full Text Available Ethylene (C2H4 is a plant hormone that has numerous effects on many horticultural and ornamental crops. It accelerates senescence, stimulates chlorophyll loss, enhances excessive softening, promotes discoloration and browning during storage of fresh produce. Among the techniques used to remove or inhibit ethylene action during postharvest handling of fresh products (potassium-based system, high temperature catalytic oxidation, inhibition of ethylene receptors, the use of titanium oxide (TiO2-based materials with photocatalytic activity under ultraviolet (UV light is one of the most promising. A fluidised-bed photoreactor (FBP was designed to decompose ethylene in the storage room atmosphere, and the relative prototype was manufactured. Since TiO2 powder alone is not suitable for use within a fluidised bed, preliminary tests to select the best support were performed. Alumina microspheres showed a good fluidisation behavior; its functionality was tested with different kind of support material and actual photocatalytic activity was tested using SiO2/TiO2-coated alumina microspheres. A reduction of approximately 72% of ethylene concentration in the tested 40 ppm ethylene gas mixture was observed after 4.5 h of 36W UV light exposure. FBP resulted to be suitable to avoid the detrimental presence of C2H4 in the atmosphere surrounding fresh products within cold storage rooms.

  9. Design and preliminary tests of a blade tip air mass injection system for vortex modification and possible noise reduction on a full-scale helicopter rotor

    Science.gov (United States)

    Pegg, R. J.; Hosier, R. N.; Balcerak, J. C.; Johnson, H. K.

    1975-01-01

    Full-scale tests were conducted on the Langley helicopter rotor test facility as part of a study to evaluate the effectiveness of a turbulent blade tip air mass injection system in alleviating the impulsive noise (blade slap) caused by blade-vortex interaction. Although blade-slap conditions could not be induced during these tests, qualitative results from flow visualization studies using smoke showed that the differential velocity between the jet velocity and the rotor tip speed was a primary parameter controlling the vortex modification.

  10. SERI Desiccant Cooling Test Facility. Status report. Preliminary data on the performance of a rotary parallel-passage silica-gel dehumidifier

    Energy Technology Data Exchange (ETDEWEB)

    Schultz, K.J.

    1986-04-01

    This report describes the SERI Desiccant Cooling Test Facility. The facility can test bench-scale rotary dehumidifiers over a wide range of controlled conditions. We constructed and installed in the test loop a prototype parallel-passage rotary dehumidifier that has spirally wound polyester tape coated with silica gel. The initial tests gave satisfactory results indicating that approximately 90% of the silica gel was active and the overall Lewis number of the wheel was near unity. The facility has several minor difficulties including an inability to control humidity satisfactorily and nonuniform and highly turbulent inlet velocities. To completely validate the facility requires a range of dehumidifier designs. Several choices are available including constructing a second parallel-passage dehumidifier with the passage spacing more uniform.

  11. Preliminary clinical study in patients with hemispatial neglect after stroke by neglect test battery and 99mTc-ECD single-photon emission computed tomography.

    Science.gov (United States)

    Yin, Yafu; Li, Xuena; Li, Yaming; Gu, Hui; Han, Chunqi; Liu, Hao

    2009-05-01

    To explore the presence, clinical characteristics, anatomical foci in image and mechanism of hemispatial neglect (HSN), neglect test battery and single-photon emission computed tomography (SPECT) regional cerebral blood flow (rCBF) imaging were performed on patients with stroke. Thirty dextromanual patients who were diagnosed as having unilateral stroke clinically were recruited. A neglect test battery including line bisection test, star cancellation test and drawing test was performed on the subjects. The severity of neglect was measured on neglect tests. The lowest rCBF, the range with decreased rCBF, number of the foci with decreased rCBF, the flow deficit size and the total number of pixels in the foci were measured on SPECT rCBF imaging. Twenty-five patients were diagnosed as having HSN by the neglect test battery. Contralateral neglect (CN) and ipsilateral neglect (IN) were observed in both right and left hemisphere strokes. On SPECT imaging, the patients with neglect had decreased rCBF in the frontal cortex most often; followed by the parietal, occipital and temporal cortices; and basal ganglia and thalamus in some cases. The patients who had two or more regions damaged showed neglect more often and severity. The correlation coefficients between rCBF in the foci, the decreased percentage of rCBF of the foci and the severity of neglect were -0.119 (P>.05) and 0.221 (P>.05). The correlation coefficients between the range, number of foci, the flow deficit size, the total number of pixels of the foci and the severity of neglect were 0.537 (Prange, number of foci, the flow deficit size and the total numbers of pixels of the foci significantly. And the patients with CN and IN did not show any difference in the presence of HSN, the manifestation on the neglect test battery and SPECT images. HSN showed damage on multiple sites, with combined damages resulting in more severe neglect.

  12. Evaluation of latex agglutination test and oxacillin resistant screening agar base (ORSAB medium for the detection of oxacillin resistant coagulase negative Staphylococci (ORCoNS (Preliminary study

    Directory of Open Access Journals (Sweden)

    Sjoekoer M. Dzen

    2007-12-01

    Full Text Available Coagulase negative Staphylococci (CoNS are recognized as an important cause of nosocomial infection, especially in neonates and patients with indwelling prosthetic devices. The CoNS resistance rate to oxacillin has been increasing. Therefore, rapid and accurate detection of oxacillin resistance is essential in order to determine the most appropriate antimicrobial therapy. This study aimed to prove that latex agglutination test and oxacillin resistant screening agar base (ORSAB medium can be used for rapid detection of oxacilllin resistant CoNS (ORCoNS. Latex agglutination test and ORSAB medium compared with the conventional method was conducted in this study toward 30 clinical isolates of CoNS for the detection of ORCoNS. Mc Nemar test was used to analyze the data. The study result revealed that there was no significant difference (P>0.05 in terms of ORCoNS detection between the latex agglutination test and ORSAB medium on the one hand, and the conventional method on the other. It is concluded that latex agglutination test and ORSAB medium can be used for rapid detection of ORCoNS. (Med J Indones 2007; 16:228-32Keywords: nosocomial infection, rapid detection, mecA gene

  13. Performance testing of the neutron flux monitors from 10keV to 1MeV developed for BNCT: A preliminary study.

    Science.gov (United States)

    Guan, Xingcai; Manabe, Masanobu; Tamaki, Shingo; Sato, Fuminobu; Murata, Isao; Wang, Tieshan

    2017-07-01

    The neutron flux monitors from 10keV to 1MeV designed for boron neutron capture therapy (BNCT) were experimentally tested with prototype monitors in an appropriate neutron field produced at the intense deuterium-tritium neutron source facility OKTAVIAN of Osaka University, Japan. The experimental test results and related analysis indicated that the performance of the monitors was good and the neutron fluxes from 10keV to 1MeV of practical BNCT neutron sources can be measured within 10% by the monitors. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. The Effect of Picture Task Cards on Performance of the Test of Gross Motor Development by Preschool-Aged Children: A Preliminary Study

    Science.gov (United States)

    Breslin, Casey M.; Robinson, Leah E.; Rudisill, Mary E.

    2013-01-01

    Performance on the Test of Gross Motor Development (Second Edition; TGMD-2) by children with autism spectrum disorders improves when picture task cards were implemented into the assessment protocol [Breslin, C.M., & Rudisill, M.E. (2011). "The effect of visual supports on performance of the TGMD-2 for children with autism spectrum…

  15. 摆杆机构风载模拟试验的初步研究%Preliminary Study on the Wind Load Simulation Test of Rocker Mechanism

    Institute of Scientific and Technical Information of China (English)

    赵海; 高亚东; 杜宗禄

    2013-01-01

      对摆杆机构风载模拟试验进行初步研究,提出一种模拟摆杆机构实际风载的试验方法,即通过摆杆竖立上下摆动模拟稳变风载,反向增加加载油缸模拟瞬变风载。通过试验验证了该方法简单、成本较低且合理可行,可作为后续相关产品模拟风载试验的参考。%  The wind load simulation test of rocker mechanism is studied preliminarily in this paper, and a test method of simulating the actual wind load of rocker mechanism is put forward, namely, simulating the constant wind load by swinging the rocker up and down and simulating the transient wind load by increasing the loading cylinder in reverse direction. The test proves that the method is simple, low-cost, reasonable and practicable, and can be taken as the reference for follow-up wind load simulation tests of relevant mechanisms.

  16. The Effect of Picture Task Cards on Performance of the Test of Gross Motor Development by Preschool-Aged Children: A Preliminary Study

    Science.gov (United States)

    Breslin, Casey M.; Robinson, Leah E.; Rudisill, Mary E.

    2013-01-01

    Performance on the Test of Gross Motor Development (Second Edition; TGMD-2) by children with autism spectrum disorders improves when picture task cards were implemented into the assessment protocol [Breslin, C.M., & Rudisill, M.E. (2011). "The effect of visual supports on performance of the TGMD-2 for children with autism spectrum disorder."…

  17. The Self-report Standardized Assessment of Personality-abbreviated Scale: Preliminary results of a brief screening test for personality disorders

    NARCIS (Netherlands)

    Germans, S.; Heck, G.L. van; Moran, P.; Hodiamont, P.P.G.

    2009-01-01

    Objective The internal consistency, test-retest reliability and validity of the Self-report Standardized Assessment of Personality-abbreviated Scale (SAPAS-SR) as a screening instrument for personality disorders were studied in a random sample of 195 Dutch psychiatric outpatients, using the Structu

  18. Design of a tablet computer app for facilitation of a molecular blood culture test in clinical microbiology and preliminary usability evaluation

    DEFF Research Database (Denmark)

    Samson, Lasse L.; Pape-Haugaard, Louise; Meltzer, Michelle C.

    2016-01-01

    BACKGROUND: User mobility is an important aspect of the development of clinical information systems for health care professionals. Mobile phones and tablet computers have obtained widespread use by health care professionals, offering an opportunity for supporting the access to patient information...... through specialized applications (apps) while supporting the mobility of the users. The use of apps for mobile phones and tablet computers may support workflow of complex tasks, for example, molecular-based diagnostic tests in clinical microbiology. Multiplex Blood Culture Test (MuxBCT) is a molecular...... of microorganisms from positive blood culture samples. The study participants were observed, and their interactions with the app were recorded. After the study, the participants were debriefed to clarify observations. RESULTS: Four medical laboratory technicians, for example, representative of end users of the app...

  19. A Low-Cost GPS GSM/GPRS Telemetry System: Performance in Stationary Field Tests and Preliminary Data on Wild Otters (Lutra lutra)

    Science.gov (United States)

    Quaglietta, Lorenzo; Martins, Bruno Herlander; de Jongh, Addy; Mira, António; Boitani, Luigi

    2012-01-01

    Background Despite the increasing worldwide use of global positioning system (GPS) telemetry in wildlife research, it has never been tested on any freshwater diving animal or in the peculiar conditions of the riparian habitat, despite this latter being one of the most important habitat types for many animal taxa. Moreover, in most cases, the GPS devices used have been commercial and expensive, limiting their use in low-budget projects. Methodology/Principal Findings We have developed a low-cost, easily constructed GPS GSM/GPRS (Global System for Mobile Communications/General Packet Radio Service) and examined its performance in stationary tests, by assessing the influence of different habitat types, including the riparian, as well as water submersion and certain climatic and environmental variables on GPS fix-success rate and accuracy. We then tested the GPS on wild diving animals, applying it, for the first time, to an otter species (Lutra lutra). The rate of locations acquired during the stationary tests reached 63.2%, with an average location error of 8.94 m (SD = 8.55). GPS performance in riparian habitats was principally affected by water submersion and secondarily by GPS inclination and position within the riverbed. Temporal and spatial correlations of location estimates accounted for some variation in the data sets. GPS-tagged otters also provided accurate locations and an even higher GPS fix-success rate (68.2%). Conclusions/Significance Our results suggest that GPS telemetry is reliably applicable to riparian and even diving freshwater animals. They also highlight the need, in GPS wildlife studies, for performing site-specific pilot studies on GPS functioning as well as for taking into account eventual spatial and temporal correlation of location estimates. The limited price, small dimensions, and high performance of the device presented here make it a useful and cost-effective tool for studies on otters and other aquatic or terrestrial medium

  20. Fuskite® preliminary experimental tests based on permeation against vacuum for hydrogen recovery as a potential application in Pb15.7Li loop systems.

    Energy Technology Data Exchange (ETDEWEB)

    Sacristán, R., E-mail: mrosa.sacristan@sener.es [SENER Ingeniería y Sistemas, C/ Provença 392, 5a, 08025 Barcelona (Spain); Veredas, G. [EURATOM-CIEMAT Fusion Assoc., Fusion Technology Division, Av. Complutense 40, 28040 Madrid (Spain); Bonjoch, I. [SENER Ingeniería y Sistemas, C/ Provença 392, 5a, 08025 Barcelona (Spain); Peñalva, I. [UPV/EHU, Departamento de Ingeniería Nuclear y Mecánica de Fluidos, Alameda de Urquijo s/n, 48013 Bilbao (Spain); Calderón, E. [SENER Ingeniería y Sistemas, C/ Provença 392, 5a, 08025 Barcelona (Spain); Alberro, G. [UPV/EHU, Departamento de Ingeniería Nuclear y Mecánica de Fluidos, Alameda de Urquijo s/n, 48013 Bilbao (Spain); Balart, D. [SENER Ingeniería y Sistemas, Avda. Zugazarte 56, 48930 Las Arenas, Vizcaya (Spain); Sarrionandia-Ibarra, A. [UPV/EHU, Departamento de Ingeniería Nuclear y Mecánica de Fluidos, Alameda de Urquijo s/n, 48013 Bilbao (Spain); Pérez, V. [SENER Ingeniería y Sistemas, Avda. Zugazarte 56, 48930 Las Arenas, Vizcaya (Spain); Ibarra, A. [EURATOM-CIEMAT Fusion Assoc., Fusion Technology Division, Av. Complutense 40, 28040 Madrid (Spain); Legarda, F. [UPV/EHU, Departamento de Ingeniería Nuclear y Mecánica de Fluidos, Alameda de Urquijo s/n, 48013 Bilbao (Spain)

    2014-10-15

    Highlights: • Full material characterization as far as hydrogen transport properties are concern. • Quantification of permeator leaks and material degasification. • Analysis of H{sub 2} recovered by means of permeation against vacuum in different conditions. • Hydrogen recovery efficiencies determination. - Abstract: Tritium recovery in fusion reactors is one of the main goals in R and D, as a limited inventory is available and its uneconomic production. That is the reason why efficient technologies are indispensable to be developed in order to achieve fast tritium recovery and its subsequent reuse in the system for increasing its self-sufficiency. In this work a flexible tritium recovery demonstrator prototype based on permeation against vacuum concept has been designed and manufactured, as well as all necessary equipment for a Pb15.7Li loop implementation in order to test and demonstrate that an in-pipe integrated solution is possible, and at the same time, to validate the manufacturing process. Thus, efficient rates for more optimized future models could be then extrapolated. The aim of this paper is to show the different testing results that have been carried out in this research project. These results include permeation properties of the material considered for the permeator, as long as it has been manufactured with a novel technique, Selective Laser Melting. They also include vacuum tests on the permeator to quantify possible leakages and to set up and analyze the capability to generate vacuum inside the permeator, and finally, permeation tests with the prototype, in a first stage with a gas mixture of hydrogen and argon inside the loop instead of Pb15.7Li.

  1. A low-cost GPS GSM/GPRS telemetry system: performance in stationary field tests and preliminary data on wild otters (Lutra lutra.

    Directory of Open Access Journals (Sweden)

    Lorenzo Quaglietta

    Full Text Available BACKGROUND: Despite the increasing worldwide use of global positioning system (GPS telemetry in wildlife research, it has never been tested on any freshwater diving animal or in the peculiar conditions of the riparian habitat, despite this latter being one of the most important habitat types for many animal taxa. Moreover, in most cases, the GPS devices used have been commercial and expensive, limiting their use in low-budget projects. METHODOLOGY/PRINCIPAL FINDINGS: We have developed a low-cost, easily constructed GPS GSM/GPRS (Global System for Mobile Communications/General Packet Radio Service and examined its performance in stationary tests, by assessing the influence of different habitat types, including the riparian, as well as water submersion and certain climatic and environmental variables on GPS fix-success rate and accuracy. We then tested the GPS on wild diving animals, applying it, for the first time, to an otter species (Lutra lutra. The rate of locations acquired during the stationary tests reached 63.2%, with an average location error of 8.94 m (SD = 8.55. GPS performance in riparian habitats was principally affected by water submersion and secondarily by GPS inclination and position within the riverbed. Temporal and spatial correlations of location estimates accounted for some variation in the data sets. GPS-tagged otters also provided accurate locations and an even higher GPS fix-success rate (68.2%. CONCLUSIONS/SIGNIFICANCE: Our results suggest that GPS telemetry is reliably applicable to riparian and even diving freshwater animals. They also highlight the need, in GPS wildlife studies, for performing site-specific pilot studies on GPS functioning as well as for taking into account eventual spatial and temporal correlation of location estimates. The limited price, small dimensions, and high performance of the device presented here make it a useful and cost-effective tool for studies on otters and other aquatic or

  2. A preliminary study of the effects of individual response to challenge tests and stress induced by humans on learning performance of weaned piglets (Sus scrofa).

    Science.gov (United States)

    Brajon, Sophie; Laforest, Jean-Paul; Schmitt, Océane; Devillers, Nicolas

    2016-08-01

    This study investigated whether individual behavioural characteristics of piglets and stress induced by experience with humans can influence learning performance. After weaning, piglets received a chronic experience with humans to modulate their emotional state: rough (ROU), gentle (GEN), or minimal (MIN) experience. Simultaneously, they were trained on a discrimination task. Afterward, their behaviour during challenge tests was assessed. The first learning step of the task involved associating a positive sound cue with a response (approach a trough) and success of piglets depended mostly on motivation to seek for reward. Although the experience with humans did not have direct effect, the degree of fear of handler, measured based on their reactivity to a human approach test, was related to motivation to seek rewards and learning speed of this first step in stressed ROU piglets, but not in MIN and GEN piglets. In contrast, the second learning step was more cognitively challenging, since it involved discrimination learning, including negative cues during which piglets had to learn to avoid the trough. Locomotion activity, measured during an open-field test, was associated with performance of the discrimination learning. To conclude, fearfulness towards humans and locomotion activity are linked with learning performance in relation to task complexity, highlighting the necessity to take into account these factors in animal research and management.

  3. A randomized controlled trial of Human Papillomavirus (HPV testing for cervical cancer screening: trial design and preliminary results (HPV FOCAL Trial

    Directory of Open Access Journals (Sweden)

    Smith Laurie W

    2010-03-01

    Full Text Available Abstract Background In the HPV FOCAL trial, we will establish the efficacy of hr-HPV DNA testing as a stand-alone screening test followed by liquid based cytology (LBC triage of hr-HPV-positive women compared to LBC followed by hr-HPV triage with ≥ CIN3 as the outcome. Methods/Design HPV-FOCAL is a randomized, controlled, three-armed study over a four year period conducted in British Columbia. It will recruit 33,000 women aged 25-65 through the province's population based cervical cancer screening program. Control arm: LBC at entry and two years, and combined LBC and hr-HPV at four years among those with initial negative results and hr-HPV triage of ASCUS cases; Two Year Safety Check arm: hr-HPV at entry and LBC at two years in those with initial negative results with LBC triage of hr-HPV positives; Four Year Intervention Arm: hr-HPV at entry and combined hr-HPV and LBC at four years among those with initial negative results with LBC triage of hr-HPV positive cases Discussion To date, 6150 participants have a completed sample and epidemiologic questionnaire. Of the 2019 women enrolled in the control arm, 1908 (94.5% were cytology negative. Women aged 25-29 had the highest rates of HSIL (1.4%. In the safety arm 92.2% of women were hr-HPV negative, with the highest rate of hr-HPV positivity found in 25-29 year old women (23.5%. Similar results were obtained in the intervention arm HPV FOCAL is the first randomized trial in North America to examine hr-HPV testing as the primary screen for cervical cancer within a population-based cervical cancer screening program. Trial Registration International Standard Randomised Controlled Trial Number Register, ISRCTN79347302

  4. A continuous-scale measure of child development for population-based epidemiological surveys: a preliminary study using Item Response Theory for the Denver Test.

    Science.gov (United States)

    Drachler, Maria de Lourdes; Marshall, Tom; de Carvalho Leite, José Carlos

    2007-03-01

    A method for translating research data from the Denver Test into individual scores of developmental status measured in a continuous scale is presented. It was devised using the Denver Developmental Screening Test (DDST) but can be used for Denver II. The DDST was applied in a community-based survey of 3389 under-5-year-olds in Porto Alegre, Brazil. The items of success were standardised by logistic regression on log chronological age. Each child's ability age was then estimated by maximum likelihood as the age in this reference population corresponding to the child's success and failures in the test. The score of developmental status is the natural logarithm of this ability age divided by chronological age and thus measures the delay or advance in the child's ability age compared with chronological age. This method estimates development status using both difficulty and discriminating power of each item in the reference population, an advantage over scores based on total number of items correctly performed or failed, which depend on difficulty only. The score corresponds with maternal opinion of child developmental status and with the 3-category scale of the DDST. It shows good construct validity, indicated by symmetrical and homogeneous variability from 3 months upwards, and reasonable results in describing gender differences in development by age, the mean score increasing with socio-economic conditions and diminishing among low-birthweight children. If a standardised measure of development status (z-scores) is required, this can be obtained by dividing the score by its standard deviation. Concurrent and discriminant validity of the score must be examined in further studies.

  5. Preliminary Tests of Blowers of Three Designs Operating in Conjunction with a Wing-Duct Cooling System for Radial Engines, Special Report

    Science.gov (United States)

    Biermann, David; Valentine, E. Floyd

    1939-01-01

    This paper is one of several dealing with methods intended to reduce the drag of present-day radial engine installations and improve the cooling at zero and low air speeds, The present paper describes model wind-tunnel tests of blowers of three designs tested in conjunction with a wing-nacelle combination. The principle of operation involved consists of drawing cooling air into ducts located in the wing root at the point of maximum slipstream velocity, passing the air through the engine baffles from rear to front, and exhausting the air through an annular slot located between the propeller and the engine with the aid of a blower mounted on the spinner. The test apparatus consisted essentially of a stub wing having a 5-foot chord and a 15-foot span, an engine nacelle of 20 inches diameter enclosing a 25-horsepower electric motor, and three blowers mounted on propeller spinners. Two of the blowers utilize centrifugal force while the other uses the lift from airfoils to force the air out radially through the exit slot. Maximum efficiencies of over 70 percent were obtained for the system as a whole. Pressures were measured over the entire flight range which were in excess of those necessary to cool present-day engines, The results indicated that blowers mounted on propeller spinners could be built sufficiently powerful and efficient to warrant their use as the only, or chief, means of forcing air through the cooling system, so that cooling would be independent of the speed of the airplane.

  6. The Mechanical Design and Preliminary Testing Results of Beam Position Monitors for the LANSCE Isotope Production Facility and Switchyard Kicker Projects

    Science.gov (United States)

    O'Hara, J. F.; Gilpatrick, J. D.; Ledford, J. E.; Shurter, R. B.; Roybal, R. J.; Bentley, B. E.

    2002-12-01

    The Los Alamos Neutron Science Center (LANSCE-1) Beam Diagnostic Team is providing Beam Position Monitors (BPMs) to the LANSCE Facility for use in two on-going projects: The Isotope Production Facility (IPF) and The Switchyard Kicker Upgrade (SYK). The BPM designs for both projects are very similar. The BPMs are classic, four, micro-stripline units having one end terminated in a 50-ohm load. This paper will discuss the position measurement requirements, mechanical design, fabrication, and alignment issues encountered for both sets of BPMs, as well as report the results obtained from the initial taught wire testing of the IPF BPMs.

  7. 金叶榆硬枝扦插试验初探%Preliminary Tests on Hardwood Cuttings of Ulmus pumila cv. jinye

    Institute of Scientific and Technical Information of China (English)

    杨艳丽; 孙福林; 黄晓霞

    2011-01-01

    在大通植物园进行金叶榆扦插试验,结果表明沙壤土扦插和地膜覆盖可提高扦插苗的高、地径生长量,明显提高扦插成活率。%Ulmus pumila cv. jinye cutting test wewe conducted in botanical garden of Datong, the results showed in sandy loam soil cutting and mulching can increase height and diameter growth, improved significant- ly survival rate of cuttings.

  8. To test or not to test

    DEFF Research Database (Denmark)

    Rochon, Justine; Gondan, Matthias; Kieser, Meinhard

    2012-01-01

    (Strategy II) had passed the preliminary Shapiro-Wilk test for normality; otherwise, Mann-Whitney’s U test was conducted. By simulation, we separately estimated the conditional Type I error probabilities for the parametric and nonparametric part of the two-stage procedure. Finally, we assessed the overall......Background: Student's two-sample t test is generally used for comparing the means of two independent samples, for example, two treatment arms. Under the null hypothesis, the t test assumes that the two samples arise from the same normally distributed population with unknown variance. Adequate...... control of the Type I error requires that the normality assumption holds, which is often examined by means of a preliminary Shapiro-Wilk test. The following two-stage procedure is widely accepted: If the preliminary test for normality is not significant, the t test is used; if the preliminary test rejects...

  9. Development and Preliminary Testing of a Framework to Evaluate Patients' Experiences of the Fundamentals of Care: A Secondary Analysis of Three Stroke Survivor Narratives

    Directory of Open Access Journals (Sweden)

    Alison L. Kitson

    2013-01-01

    Full Text Available Aim. To develop and test a framework describing the interrelationship of three key dimensions (physical, psychosocial, and relational in the provision of the fundamentals of care to patients. Background. There are few conceptual frameworks to help healthcare staff, particularly nurses, know how to provide direct care around fundamental needs such as eating, drinking, and going to the toilet. Design. Deductive development of a conceptual framework and qualitative analysis of secondary interview data. Method. Framework development followed by a secondary in-depth analysis of primary narrative interview data from three stroke survivors. Results. Using the physical, psychosocial and relational dimensions to develop a conceptual framework, it was possible to identify a number of “archetypes” or scenarios that could explain stroke survivors’ positive experiences of their care. Factors contributing to suboptimal care were also identified. Conclusions. This way of thinking about how the fundamentals of care are experienced by patients may help to elucidate the complex processes involved around providing high quality fundamentals of care. This analysis illustrates the multiple dimensions at play. However, more systematic investigation is required with further refining and testing with wider healthcare user groups. The framework has potential to be used as a predictive, evaluative, and explanatory tool.

  10. Anxiogenic-like effects of Uncaria tomentosa (Willd.) DC. aqueous extract in an elevated plus maze test in mice: a preliminary study.

    Science.gov (United States)

    Bigliani, María Celeste; Rosso, María Celeste; Zunino, Paula M; Baiardi, Gustavo; Ponce, Andrés Alberto

    2013-01-01

    The purpose of this study was to examine the effect of orally administered Uncaria tomentosa aqueous extracts (UTE) (Willd. ex Roem. & Schult.) DC. (Rubiaceae) during 7, 15, 30 and 90 days of treatment on the expression of anxiety, as expressed in the elevated plus maze test in male Albino Swiss mice. UTE revealed an anxiogenic effect in relation to the control group at 15 and 30 days, but it was reversed after 90 days of administration, without affecting the locomotor activity or any deleterious effects on the overall performance of the animal, either for its ambulation, or clinical status, and body weight and organ weight/body weight from liver, lung and kidney were unaffected. These biphasic effects are usually indicative of heterogeneity in sites of action due to the presence of many alkaloids (speciophylline, uncarine F and uncarine E) and flavanols (catechin and epigallocatechin) identified and isolated from UTE.

  11. Noise from high speed maglev systems: Noise sources, noise criteria, preliminary design guidelines for noise control, and recommendations for acoustical test facility for maglev research

    Science.gov (United States)

    Hanson, C. E.; Abbot, P.; Dyer, I.

    1993-01-01

    Noise levels from magnetically-levitated trains (maglev) at very high speed may be high enough to cause environmental noise impact in residential areas. Aeroacoustic sources dominate the sound at high speeds and guideway vibrations generate noticeable sound at low speed. In addition to high noise levels, the startle effect as a result of sudden onset of sound from a rapidly moving nearby maglev vehicle may lead to increased annoyance to neighbors of a maglev system. The report provides a base for determining the noise consequences and potential mitigation for a high speed maglev system in populated areas of the United States. Four areas are included in the study: (1) definition of noise sources; (2) development of noise criteria; (3) development of design guidelines; and (4) recommendations for a noise testing facility.

  12. 除草剂"百草枯"对家蚕毒性试验初报%Preliminary Toxicity Test of Paraquat on Silkworm

    Institute of Scientific and Technical Information of China (English)

    朱建华

    2015-01-01

    In order to find out the influence of Paraquat on silkworm rearing, the toxicity test of Paraquat on silkworm was carried out in this article. The results showed that Paraquat has strong toxicity on silkworm rearing. It indicated that it need to be cautious when using Paraquat in mulberry field management.%为了弄清除草剂百草枯对家蚕饲养的影响,本文初步调查了百草枯农药对家蚕的毒性.结果表明,百草枯对家蚕饲养具有较强的毒性,在桑园管理上使用时需谨慎.

  13. Utilization of reverse osmosis (RO) for reuse of MBR-treated wastewater in irrigation-preliminary tests and quality analysis of product water.

    Science.gov (United States)

    Bunani, Samuel; Yörükoğlu, Eren; Sert, Gökhan; Kabay, Nalan; Yüksel, Ümran; Yüksel, Mithat; Egemen, Özdemir; Pek, Taylan Özgür

    2015-02-19

    Membrane bioreactor (MBR) effluent collected from a wastewater treatment plant installed at an industrial zone was used for reverse osmosis (RO) membrane tests in the laboratory. For this, two different GE Osmonics RO membranes (AK-BWRO and AD-SWRO) were employed. The results showed that AK-brackish water reverse osmosis (AK-BWRO) and AD-seawater reverse osmosis (AD-SWRO) membranes have almost similar rejection performances regarding analyzed parameters such as conductivity, salinity, color, chemical oxygen demand (COD), and total organic carbon (TOC). On the other hand, these membranes behaved quite differently considering their permeate water flux at the same applied pressure of 10 bar. AD-SWRO membrane was also tested at 20 bar. The results revealed that AD-SWRO membrane had almost the same rejections either at 10 or at 20 bar of applied pressure. Compared with irrigation water standards, AK-BWRO and AD-SWRO gave an effluent with low salinity value and sodium adsorption ratio (SAR) which makes it unsuitable for irrigation due to the infiltration problems risi0ng from unbalanced values of salinity and SAR. Combination of MBR effluent and RO effluent at respective proportions of 0.3:0.7 and 0.4:0.6 for AK-BWRO and AD-SWRO, respectively, are the optimum mixing ratios to overcome the infiltration hazard problem. Choice of less-sensitive crops to chloride and sodium ions is another strategy to overcome all hazards which may arise from above suggested mixing proportions.

  14. Design and preliminary test of spherical hinge based on MR fluid%磁流变球铰设计及初步实验研究

    Institute of Scientific and Technical Information of China (English)

    杨雅嘉; 田煜; 周铭

    2011-01-01

    设计了一种基于磁流变液的扭矩可控的多自由度球铰结构并进行了初步实验研究.研究结合有限元分析对该结构在静态磁场下的磁感应强度分布进行了仿真,变换不同的仿真条件对改变设计参数后结构的性能进行了对比,并搭建了基于拉压力传感器的测试系统,对所设计的结构进行了测试.实验结果表明,使用自制体积比率50%的磁流变液,通过控制外加电流,该球铰扭矩可在0.14到1.85 Nm连续变化.连续工作时可靠性较高,重复性较好,球铰的扭矩相对漂移约4%,在相同条件参数下工作扭矩相对漂移约2%.所设计的结构比与其他扭矩控制结构可更高效提供阻力矩,对该设计的改进方案也进行了讨论.%A multiple DOF spherical hinge structure is designed based on Magnetorheological(MR)-Fluid, whose torque resistant capability can be flexibly controlled.Finite Element Method (FEM)is intro-duced to analyze and simulate the distribution of Magnetic Flux Density( MFD )of such structure under mag-netic fields.Then comparison is made among different simulating conditions far the structure performance after altering the design parameters.And a testing system based on pull pressure sensor is set up for testing the- structure designed,which result indicates that the torque of the spherical hinge can be continuously modulated from 0.14 Nm to 1.8 Nm with appreciable re liability (relative torque drift about 4%)and repeata-bility (relative torque drift about 2%)using MR fluid with 50% self-control volume ratio through controlling impressed current.Thus the structure designed is more efficient in providing resistant torque compared with other torque controllable structure, which improving proposal for the design is discussed as well.

  15. Establishing a Long-term 30 Year Global Solar Resource at 10 km Resolution: Preliminary Results From Test Processing and Continuing Plans

    Science.gov (United States)

    Stackhouse, P. W.; Mikovitz, J. C.; Cox, S. J.; Zhang, T.; Perez, R.; Schlemmer, J.; Sengupta, M.; Knapp, K. R.

    2014-12-01

    As renewable energy system become more prevalent, improved global long-term, up-to-date records are needed to better understand and quantify the solar resource and variability. Toward this end, a project involving NASA, DOE NREL, SUNY-Albany and the NOAA National Climatic Data Center (NCDC) was initiated to provide NREL with a solar resource mapping production system for improved depiction of global long-term solar resources that provides the capacity for continual updates. This new production system is made possible by the efforts of NOAA and NASA to completely reprocess the International Satellite Cloud Climatology Project (ISCCP) data set that provides satellite visible and infrared radiances together with retrieved cloud and surface properties on a 3-hourly basis beginning from July 1983 at an effective 10 km resolution. Thus, working with SUNY and NCDC, NASA will develop and test an improved production system that will yield an operational production system for NREL to continually update the Earth's solar resource. In this presentation, we provide a general overview of this project together with samples of the new solar irradiance mapped data products and comparisons to surface measurements at various locations across the world. Here, a three-year prototype of the anticipated ISCCP data set called GridSat is used to assess the algorithms and demonstrate the production system. GridSat maps together cross-calibrated visible and IR reflectances from all the world's geosynchronous satellites at 10 km and 3-hourly respectively. The results are shown and discussed in comparison to existing solar data products. Additionally, the solar irradiance values are compared to various Baseline Surface Radiation Network surface site measurements and other high quality surface measurements. The statistics of the agreement between the measurements and new satellite estimates are also reviewed. The team is now testing a beta release of the revised ISCCP data set through the NOAA

  16. To test or not to test

    DEFF Research Database (Denmark)

    Rochon, Justine; Gondan, Matthias; Kieser, Meinhard

    2012-01-01

    control of the Type I error requires that the normality assumption holds, which is often examined by means of a preliminary Shapiro-Wilk test. The following two-stage procedure is widely accepted: If the preliminary test for normality is not significant, the t test is used; if the preliminary test rejects...... the null hypothesis of normality, a nonparametric test is applied in the main analysis. Methods: Equally sized samples were drawn from exponential, uniform, and normal distributions. The two-sample t test was conducted if either both samples (Strategy I) or the collapsed set of residuals from both samples......, the most important one being the selection mechanism due to the preliminary test. Interestingly, the overall Type I error rate and power of the entire two-stage procedure remained within acceptable limits. Conclusion: The two-stage procedure might be considered incorrect from a formal perspective...

  17. Preliminary data on the effect of culture on the assessment of Alzheimer's disease-related verbal memory impairment with the International Shopping List Test.

    Science.gov (United States)

    Lim, Yen Ying; Pietrzak, Robert H; Snyder, Peter J; Darby, David; Maruff, Paul

    2012-03-01

    The International Shopping List Test (ISLT) is a measure of verbal learning and memory, developed specifically for use in people from different cultural and linguistic backgrounds. In this report, we describe two studies that examined the ISLT's ability to detect memory impairment and memory decline in patients with mild Alzheimer's disease (AD) from a range of cultural and linguistic backgrounds. In Study 1, the performance of Australian-English-speaking adults with mild AD was compared with that of native Australian-English- and Korean-speaking patients with mild AD. Compared with controls, patients with AD from both language groups showed large but equivalent impairments in total recall, delayed recall, rate of learning, and primacy and retention-weighted recall (RWR) measures on the ISLT. In Study 2, the rate of deterioration in verbal memory over 1 year was examined in groups of native Canadian-English, French, and Korean speakers with mild AD using the total recall, delayed recall, and RWR measures. Rates of change on all three measures were equivalent across the language groups, although the magnitude of deterioration was most pronounced for the total recall and RWR measures. Taken together, these results suggest that the ISLT is valid and reliable for the assessment of verbal learning and memory impairment and decline in patients with mild AD from diverse language groups.

  18. Refraining from intrusive thoughts is strategy dependent: a comment on Sugiura, et al. And a preliminary informal test of detached mindfulness, acceptance, and other strategies.

    Science.gov (United States)

    Wells, Adrian; Roussis, Panagiotis

    2014-10-01

    The control of cognition is fundamental to psychological well being. One dimension recently explored by Sugiura, Sugiura and Tanno (2013) is the perceived ability to refrain from catastrophic thinking-a construct that could be a marker of several factors. The current paper recommends deeper consideration in terms of metacognitive theory and exemplifies this by testing the effect of a strategy that focuses on abstaining from processes (detached mindfulness) vs. transforming content (acceptance, brief exposure). Fifty-six participants (M age = 21.5 yr., range = 18-42) were randomly assigned to detached mindfulness, acceptance, exposure, or a control group before watching a stressful film that induced intrusive images. Afterwards, they engaged in their respective strategies for 5 min. and the frequency of intrusive images was rated. Detached mindfulness was the only manipulation that was associated with a statistically significant lower frequency of intrusions than the control condition. It is argued that assessment of perceived skills to refrain from thinking should be conceptualized within a metacognitive framework that distinguish process- and content-oriented strategies and address the question: When is a strategy a true refrain?

  19. Performance of the Fecal Immunochemical Test for Colorectal Cancer Screening Using Different Stool-Collection Devices: Preliminary Results from a Randomized Controlled Trial.

    Science.gov (United States)

    Shin, Hye Young; Suh, Mina; Baik, Hyung Won; Choi, Kui Son; Park, Boyoung; Jun, Jae Kwan; Hwang, Sang-Hyun; Kim, Byung Chang; Lee, Chan Wha; Oh, Jae Hwan; Lee, You Kyoung; Han, Dong Soo; Lee, Do-Hoon

    2016-11-15

    We are in the process of conducting a randomized trial to determine whether compliance with the fecal immunochemical test (FIT) for colorectal cancer screening differs according to the stool-collection method. This study was an interim analysis of the performance of two stool-collection devices (sampling bottle vs conventional container). In total, 1,701 individuals (age range, 50 to 74 years) were randomized into the sampling bottle group (intervention arm) or the conventional container group (control arm). In both groups, we evaluated the FIT positivity rate, the positive predictive value for advanced neoplasia, and the detection rate for advanced neoplasia. The FIT positivity rates were 4.1% for the sampling bottles and 2.0% for the conventional containers; these values were significantly different. The positive predictive values for advanced neoplasia in the sampling bottles and conventional containers were 11.1% (95% confidence interval [CI], -3.4 to 25.6) and 12.0% (95% CI, -0.7 to 24.7), respectively. The detection rates for advanced neoplasia in the sampling bottles and conventional containers were 4.5 per 1,000 persons (95% CI, 2.0 to 11.0) and 2.4 per 1,000 persons (95% CI, 0.0 to 5.0), respectively. The impact of these findings on FIT screening performance was unclear in this interim analysis. This impact should therefore be evaluated in the final analysis following the final enrollment period.

  20. The North Carolina Field Test: Field Performance of the Preliminary Version of an Advanced Weatherization Audit for the Department of Energy's Weatherization Assistance Program

    Energy Technology Data Exchange (ETDEWEB)

    Sharp, T.R.

    1994-01-01

    The field performance of weatherizations based on a newly-developed advanced technique for selecting residential energy conservation measures was tested alongside current Retro-Tech-based weatherizations in North Carolina. The new technique is computer-based and determines measures based on the needs of an individual house. In addition, it recommends only those measures that it determines will have a benefit-to-cost ratio greater than 1 for the house being evaluated. The new technique also considers the interaction of measures in computing the benefit-to-cost ratio of each measure. The two weatherization approaches were compared based on implementation ease, measures installed, labor and cost requirements, and both heating and cooling energy savings achieved. One-hundred and twenty houses with the following characteristics participated: the occupants were low-income, eligible for North Carolina's current weatherization program, and responsible for their own fuel and electric bills. Houses were detached single-family dwellings, not mobile homes; were heated by kerosene, fuel oil, natural gas, or propane; and had one or two operating window air conditioners. Houses were divided equally into one control group and two weatherization groups. Weekly space heating and cooling energy use, and hourly indoor and outdoor temperatures were monitored between November 1989 and September 1990 (pre-period) and between December 1990 and August 1991 (post-period). House consumption models were used to normalize for annual weather differences and a 68 F indoor temperature. Control group savings were used to adjust the savings determined for the weatherization groups. The two weatherization approaches involved installing attic and floor insulations in near equivalent quantities, and installing storm windows and wall insulation in drastically different quantities. Substantial differences also were found in average air leakage reductions for the two weatherization groups. Average

  1. Preliminary observations on fluids incubated with Wuchereria bancrofti using the immunochromatographic test Observações preliminares de fluidos incubados com Wuchereria bancrofti usando o teste imunocromatográfico

    Directory of Open Access Journals (Sweden)

    Gerusa Dreyer

    2008-04-01

    Full Text Available To assess the performance of the immunochromatographic test for filariasis, adult Wuchereria bancrofti worms were incubated under different conditions. The tests were strongly positive with incubation fluids from both living and mechanically damaged females. Negative results were observed with incubation fluids from all male worms and from intact dead females.Para a valiar o desempenho do teste imunocromatográfico para filariose, vermes adultos de Wuchereria bancrofti foram incubados em diferentes condições. Os testes foram fortemente positivos com fluidos de incubação de fêmeas vivas e danificadas mecanicamente. Resultados negativos foram obtidos com fluidos de todos os machos e de fêmeas mortas intactas.

  2. 杉木耐贫瘠优良无性系苗期初选%Preliminary Evaluation on Fine Clones of Chinese fir Based on Sexual Progeny Tests

    Institute of Scientific and Technical Information of China (English)

    齐明; 何贵平; 曹高铨; 程亚平; 罗修宝; 翁春媚

    2013-01-01

    In order to shorten the breeding cycle of Chinese fir (Cunninghamia lanceolata) clone,and select good clones with stronger tolerance to barrenness,in the light of 31 clones,artificial design nutrient environments,the experiment was carried out according to two factors randomized blocks,8 individuals (in 8 cups) in each plot.After the experiment finished,the height and diameter at base of seedling were measured on entire experiment.The other traits such as the aboveground biomass,the underground biomass,the total biomass,the root-shoot ratio and the entire P content of individual have been measured according to sampling method.The results of statistical analysis showed that:(1)There were obvious differences among the clones in all the traits besides root-shoot ratio; (2)Obvious differences in all the traits existed under different nutrient stress and different sites conditions among different clones ; (3) The interaction of clone × nutrient coercion processing was complex ; (4) The research traits showed a certain variation and repeatability over intermediate level.Based on the variance analysis (fixed model),the PCA selection index under different situations was derived and obtained.Using certain selected intensity,13outstanding clones were evaluated from the entire experiment.Among them 7 clones were anti-phosphorus and the anti-potassium lack (happy nitrogenous fertilizer) clones,7 clones were anti-phosphorus lack (happy nitrogen potassium fertilizer) clones,8 fine clones were selected under normal nutrient management (happy nitrogenous,phosphorus,potassium),there were 5 fine clones with good performance,and simultaneously very stable under all kind of conditions.These clones may be applied to field tests.

  3. Preliminary testing of NiFe2O4-NiO as ceramic matrix of cermet inert anode in aluminum electrolysis

    Institute of Scientific and Technical Information of China (English)

    秦庆伟; 赖延清; 肖劲; 李劼; 刘业翔

    2003-01-01

    Sintered samples of nickel ferrite-nickel oxide ceramic, usually used as the ceramic phase of cermet inert anode in aluminum electrolysis, were prepared and characterized. The solubilities of NiFe2O4-NiO ceramics were measured using an equilibration technique in the Na3AlF6-10%AlF3-5%CaF2-5 %Al2O3 melts at 960 ℃. Electrical resistivity was also measured for NiFe2O4-NiO ceramic samples prepared using the usual ceramic technique as function of temperature and content of NiO with an improved pyroconductivity test device, consisting of a specially constructed closed furnace and a Potentiostat/Galvanostat, based on the conventional direct current four-probe technique. Results show that, under the experimental conditions, the solubility of Fe from NiFe2O4 is 0.06% and Ni from NiFe2O4 is 0.008%. The solubility of Fe and Ni from NiFe2O4-NiO ceramic is inversely related to each other. The solubility of Ni increases but overall solubility of NiFe2O4-NiO ceramics decreases with increasing NiO content. The studied ceramic samples have a semiconductor behavior where electrical resistivity ρ decreases with increasing temperature and the resistivity ρ increases with increasing porosity. The resistivity ρ of NiFe2O4-NiO ceramic shows a minimum with increasing the content of NiO at various temperatures.

  4. Catechol-O-methyltransferase Val158Met genotype in healthy and personality disorder individuals: Preliminary results from an examination of cognitive tests hypothetically differentially sensitive to dopamine functions

    Directory of Open Access Journals (Sweden)

    Winnie W Leung

    2007-01-01

    Full Text Available Winnie W Leung1, Margaret M McClure1, Larry J Siever1,2, Deanna M Barch3, Philip D Harvey1,21Department of Veterans Affairs, VISN 3 Mental Illness Research, Education, and Clinical Center (MIRECC, Bronx, NY, USA; 2Department of Psychiatry, Mt. Sinai School of Medicine, New York, NY, USA; 3Departments of Psychology and Psychiatry, Washington University, St. Louis, MO, USAAbstract: A functional polymorphism of the gene coding for Catechol-O-methyltrasferase (COMT, an enzyme responsible for the degradation of the catecholamine dopamine (DA, epinephrine, and norepinephrine, is associated with cognitive deficits. However, previous studies have not examined the effects of COMT on context processing, as measured by the AX-CPT, a task hypothesized to be maximally relevant to DA function. 32 individuals who were either healthy, with schizotypal personality disorder, or non-cluster A, personality disorder (OPD were genotyped at the COMT Val158Met locus. Met/Met (n = 6, Val/Met (n = 10, Val/Val (n = 16 individuals were administered a neuropsychological battery, including the AX-CPT and the N-back working memory test. For the AX-CPT, Met/Met demonstrated more AY errors (reflecting good maintenance of context than the other genotypes, who showed equivalent error rates. Val/Val demonstrated disproportionately greater deterioration with increased task difficulty from 0-back to 1-back working memory demands as compared to Met/Met, while Val/Met did not differ from either genotypes. No differences were found on processing speed or verbal working memory. Both context processing and working memory appear related to COMT genotype and the AX-CPT and N-back may be most sensitive to the effects of COMT variation.Keywords: COMT, dopamine, context processing, working memory, schizotypal personality disorder

  5. Risk assessment for CPAP nonadherence in adults with newly diagnosed obstructive sleep apnea: preliminary testing of the Index for Nonadherence to PAP (I-NAP).

    Science.gov (United States)

    Sawyer, Amy M; King, Tonya S; Hanlon, Alexandra; Richards, Kathy C; Sweer, Leon; Rizzo, Albert; Weaver, Terri E

    2014-12-01

    Identification of risk for continuous positive airway pressure therapy (CPAP) nonadherence prior to home treatment is an opportunity to deliver targeted adherence interventions. Study objectives included the following: (1) test a risk screening questionnaire to prospectively identify CPAP nonadherence risk among adults with newly diagnosed obstructive sleep apnea (OSA), (2) reduce the questionnaire to a minimum item set that effectively identifies 1-month CPAP nonadherence, and (3) examine the diagnostic utility of the screening index. A prospective, longitudinal study at two clinical sleep centers in the USA included adults with newly diagnosed OSA (n=97; AHI≥5 events/h) by polysomnogram (PSG) consecutively recruited to participate. After baseline participant and OSA characteristics were collected, a risk screening questionnaire was administered immediately following CPAP titration polysomnogram. One-month objective CPAP use was collected. Predominantly, white (87%), males (55%), and females (45%) with obesity (BMI 38.3 kg/m2; SD 9.3) and severe OSA (AHI 36.8; SD 19.7) were included. One-month CPAP use was 4.25 h/night (SD 2.35). Nineteen questionnaire items (I-NAP) reliably identified nonadherers defined at point for the I-NAP screening questionnaire were determined to maximize sensitivity (87%) while maintaining specificity>60% (63%). A risk screening questionnaire employed immediately after titration PSG may reliably identify CPAP nonadherers and permit the delivery of targeted interventions to prevent or reduce nonadherence. This novel approach may enhance cost-effectiveness of care and permit appropriate allocation of resources for CPAP adherence.

  6. Developmental plasticity in fat patterning of Ache children in response to variation in interbirth intervals: a preliminary test of the roles of external environment and maternal reproductive strategies.

    Science.gov (United States)

    Baker, Jack; Hurtado, Ana Magdalena; Pearson, Osbjorn M; Hill, Kim R; Jones, Troy; Frey, M Anderson

    2009-01-01

    A firm link between small size at birth and later more centralized fat patterning has been established in previous research. Relationships between shortened interbirth intervals and small size at birth suggest that maternal energetic prioritization may be an important, but unexplored determinant of offspring fat patterning. Potential adaptive advantages to centralized fat storage (Baker et al., 2008: In: Trevathan W, McKenna J, Smith EO, editors. Evolutionary Medicine and Health: New Perspectives. New York: Oxford) suggest that relationships with interbirth intervals may reflect adaptive responses to variation in patterns of maternal reproductive effort. Kuzawa (2005: Am J Hum Biol 17:5-21; 2008: In: Trevathan W, McKenna J, Smith EO, editors. Evolutionary Medicine and Health: New Perspectives. New York: Oxford) has argued that maternal mediation of the energetic quality of the environment is a necessary component of developmental plasticity models invoking predictive adaptive responses (Gluckman and Hanson 2004: Trends Endocrinol Metab 15:183-187). This study tested the general hypothesis that shortened interbirth intervals would predict more centralized fat patterning in offspring. If long-term maternally mediated signals are important determinants of offspring responses, then we expected to observe a relationship between the average interbirth interval of mothers and offspring adiposity, with no relationship with the preceding interval. Such a finding would suggest that maternal, endogenous resource allocation decisions are related to offspring physiology in a manner consistent with Kuzawa's description. We observed exactly such a relationship among the Ache of Paraguay, suggesting that maternally mediated in utero signals of postnatal environments may be important determinants of later physiology. The implications of these findings are reviewed in light of life history and developmental plasticity theories and ourability to generalize the results to other

  7. A preliminary investigation of the structure of southern Yucca Flat, Massachusetts Mountain, and CP basin, Nevada Test Site, Nevada, based on geophysical modeling.

    Energy Technology Data Exchange (ETDEWEB)

    Geoffrey A. Phelps; Leigh Justet; Barry C. Moring, and Carter W. Roberts

    2006-03-17

    New gravity and magnetic data collected in the vicinity of Massachusetts Mountain and CP basin (Nevada Test Site, NV) provides a more complex view of the structural relationships present in the vicinity of CP basin than previous geologic models, helps define the position and extent of structures in southern Yucca Flat and CP basin, and better constrains the configuration of the basement structure separating CP basin and Frenchman Flat. The density and gravity modeling indicates that CP basin is a shallow, oval-shaped basin which trends north-northeast and contains ~800 m of basin-filling rocks and sediment at its deepest point in the northeast. CP basin is separated from the deeper Frenchman Flat basin by a subsurface ridge that may represent a Tertiary erosion surface at the top of the Paleozoic strata. The magnetic modeling indicates that the Cane Spring fault appears to merge with faults in northwest Massachusetts Mountain, rather than cut through to Yucca Flat basin and that the basin is downed-dropped relative to Massachusetts Mountain. The magnetic modeling indicates volcanic units within Yucca Flat basin are down-dropped on the west and supports the interpretations of Phelps and KcKee (1999). The magnetic data indicate that the only faults that appear to be through-going from Yucca Flat into either Frenchman Flat or CP basin are the faults that bound the CP hogback. In general, the north-trending faults present along the length of Yucca Flat bend, merge, and disappear before reaching CP hogback and Massachusetts Mountain or French Peak.

  8. Measurement of hand dynamics in a microsurgery environment: Preliminary data in the design of a bimanual telemicro-operation test bed

    Science.gov (United States)

    Charles, Steve; Williams, Roy

    1989-01-01

    Data describing the microsurgeon's hand dynamics was recorded and analyzed in order to provide an accurate model for the telemicrosurgery application of the Bimanual Telemicro-operation Test Bed. The model, in turn, will guide the development of algorithms for the control of robotic systems in bimanual telemicro-operation tasks. Measurements were made at the hand-tool interface and include position, acceleration and force between the tool-finger interface. Position information was captured using an orthogonal pulsed magnetic field positioning system resulting in measurements in all six degrees-of-freedom (DOF). Acceleration data at the hands was obtained using accelerometers positioned in a triaxial arrangement on the back of the hand allowing measurements in all three cartesian-coordinate axes. Force data was obtained by using miniature load cells positioned between the tool and the finger and included those forces experienced perpendicular to the tool shaft and those transferred from the tool-tissue site. Position data will provide a minimum/maximum reference frame for the robotic system's work space or envelope. Acceleration data will define the response times needed by the robotic system in order to emulate and subsequently outperform the human operator's tool movements. The force measurements will aid in designing a force-reflective, force-scaling system as well as defining the range of forces the robotic system will encounter. All analog data was acquired by a 16-channel analog-to-digital conversion system residing in a IBM PC/AT-compatible computer at the Center's laboratory. The same system was also used to analyze and present the data.

  9. [Health promotion effectiveness: testing the German statutory health insurance agencies evaluation system in health promotion, and preliminary findings from 212 health training courses].

    Science.gov (United States)

    Kliche, T; Schreiner-Kürten, K; Wanek, V; Koch, U

    2011-04-01

    The purpose of this study was to develop a measurement system for the evaluation of health promotion training courses offered by German statutory health insurance companies. In a field test, N=1 671 participants from 212 youth and adult courses for the promotion of either physical activity, coping with stress or nutritional improvement were included. 80% were female. Participants were questioned in a pre-post-design with a three month follow-up. The questionnaires covered health behaviour and health status. Participants' compliance and psychometric quality of the measurement instruments were good. On average, the health insurance companies assigned participants to different interventions adequately according to the participant's individual health problems. The health promotion courses triggered improvements of high effect sizes for health behaviour patterns, of moderate effect sizes for physical complaints, subjective health ratings, and health-related quality of life. Effects decreased after the end of the intervention but remained significantly above the initial values. BMI values continued their improvement after the end of the training courses. Thus, health promotion training courses generated stable health improvements of practically relevant effect sizes. The interventions provided good support and health improvements for all subgroups of participants, regardless of age, gender and educational background. Thus, the health promotion curricula of the health insurance companies offer a ubiquitous and easily accessible but effective intervention for health promotion in Germany, although men are clearly underrepresented among the participants. The trainings may be recommended and used by other health-care suppliers. The evaluation toolkit provides practical and valid instruments for a routine evaluation of health promotion trainings. It should be applied within random sampling designs. © Georg Thieme Verlag KG Stuttgart · New York.

  10. The North Carolina Field Test: Field performance of the preliminary version of an advanced weatherization audit for the Department of Energy`s Weatherization Assistance Program

    Energy Technology Data Exchange (ETDEWEB)

    Sharp, T.R.

    1994-06-01

    The field performance of weatherizations based on a newly-developed advanced technique for selecting residential energy conservation measures was tested alongside current Retro-Tech-based weatherizations in North Carolina. The new technique is computer-based and determines measures based on the needs of an individual house. In addition, it recommends only those measures that it determines will have a benefit-to-cost ratio greater than 1 for the house being evaluated. The new technique also considers the interaction of measures in computing the benefit-to-cost ratio of each measure. The two weatherization approaches were compared based on implementation ease, measures installed, labor and cost requirements, and both heating and cooling energy savings achieved. One-hundred and twenty houses with the following characteristics participated: the occupants were low-income, eligible for North Carolina`s current weatherization program, and responsible for their own fuel and electric bills. Houses were detached single-family dwellings, not mobile homes; were heated by kerosene, fuel oil, natural gas, or propane; and had one or two operating window air conditioners. Houses were divided equally into one control group and two weatherization groups. Weekly space heating and cooling energy use, and hourly indoor and outdoor temperatures were monitored between November 1989 and September 1990 (pre-period) and between December 1990 and August 1991 (post-period). House consumption models were used to normalize for annual weather differences and a 68{degrees}F indoor temperature. Control group savings were used to adjust the savings determined for the weatherization groups. The two weatherization approaches involved installing attic and floor insulations in near equivalent quantities, and installing storm windows and wall insulation in drastically different quantities. Substantial differences also were found in average air leakage reductions for the two weatherization groups.

  11. 红细胞溶血试验检测化妆品眼刺激性的初步研究%Preliminary study on Red blood cell hemolysis test of draize alternatives

    Institute of Scientific and Technical Information of China (English)

    刘肃; 何华红; 戚莉莉

    2015-01-01

    目的:探讨红细胞溶血试验在化妆品眼刺激性检测中的适用性。方法选用9种化妆品产品进行眼刺激试验,确定家兔红细胞50%发生溶血时的化妆品浓度(HD50值)和血红蛋白变性指数(DI,%),计算刺激指数IP= HD50/DI,以IP=HD50/DI值作为评价标准,进行眼刺激性分级。将红细胞溶血试验刺激性分级结果与家兔眼刺激试验(Draize eye test)结果进行分级一致性比较,初步分析体外试验的适用性。结果红细胞溶血试验与动物实验结果比较中,9种样品中有7种结果一致,一致率为77.8%(相关性为0.4962)。结论虽然实验结果说明两者有一定的相关性,但多方面而言,红细胞溶血试验能否真正取代动物实验还有待商榷。%Objective To study the red blood cell hemolysis test on the applicability of the cosmetic eye irritation test.Methods9 kinds of cosmetic products are chosen as the subjects, and determine the subjects of rabbit red blood cell hemolysis occurs in 50% subjects (HD50) and the initial concentration of hemoglobin denaturation index (DI, %), the calculation of IP=HD50/DI, with IP=HD50/DI value as evaluation standard, make eye irritant grading.Results excitant grading erythrocyte hemolysis test and animal experiment results are compared, and grading consistency preliminary analysis the applicability of the in vitro. Results: Red blood cell hemolysis test and animal experiment result comparison, seven of nine subjects content is consistent, consistent rate was 77.8%(probability=0.4962). ConclusionThough the experiment results show that both have certain relevance, but many ways, red blood cell hemolysis test failed to truly replace animal testing.

  12. Preliminary establishment of the laboratory diagnostic test for malignant hyperthermia%恶性高热实验室诊断方法的初步建立

    Institute of Scientific and Technical Information of China (English)

    王颖林; 郭向阳; 罗爱伦; 黄宇光; 叶铁虎; 任洪智; 谭刚; 崔旭蕾

    2008-01-01

    目的 初步建立恶性高热(MH)的实验室诊断方法-咖啡因-氟烷骨骼肌收缩试验(CHCT).方法 选取10头实验小型猪和1头皮特兰猪,肌肉注射氯胺酮和地西泮麻醉后,静脉注射硫喷妥钠5mg/kg和琥珀胆碱2mg/kg麻醉诱导后气管插管,机械通气,吸入2%~3%氟烷4 h,新鲜气流量为2 L/min,纯氧和空气各1 L/min.记录麻醉过程中及麻醉结束后48 h内MH的发生情况.气管插管后即刻取耳组织,采用常规酚氯仿方法提取基因组DNA,检测蓝尼定受体-1(RYR1)基因的突变情况.根据北美MH研究组的标准建立CHCT的实验装置,气管插管后即刻取股四头肌近肌腱部位的肌纤维,进行CHCT.结果 实验小型猪均未见MH发作,而皮特兰猪在麻醉过程中出现MH的特征性表现.RYR1基因检测显示,实验小型猪均为氟烷抗性基因型(HALNN);皮特兰猪为氟烷易感基因型(HALnn).CHCT结果表明,实验小型猪诊断为非MH易感猪,皮特兰猪诊断为MH易感猪.结论 .实验小型猪和皮特兰猪的CHCT诊断结果与特征性表现及RYR1基因检测结果均一致,初步验证本实验室CHCT设备的稳定性及测定结果的可靠性.%Objective To preliminarily establish laboratory diagnostic test for malignant hyperthermia (MH) -- caffeine and halothane contracture test (CHCT). Methods Ten Chinese experimental miniature pigs (CEMP) and one pietrain swine were selected in this study. The animals were anesthetized with ketamine and diasepam. Anesthesia was induced with thiopental sodium 5 mg/kg and tracheal intubation was facilitated with suecinylcholine 2 mg/kg intravenously. The animals were mechanically ventilated and anesthesia was maintained with inhalation of 2%-3% halothane for4 h. Frash gas flow was set at 2 L/min and oxygen and air flow at 1 L/ min. All the aninals were observed whether the MH episodes were initiated or not during the process of anesthesia and 48 h after anesthesia. Ear tissues were removed immediately after

  13. A preliminary study of test reliabilty in quantitative proprioception measurement%本体感觉定量评定的可靠性初探

    Institute of Scientific and Technical Information of China (English)

    胡建平; 伊文超; 李瑞炎; 蒋祥龙; 易万龙

    2012-01-01

    Objective To study the test-retest reliability in quantitative measurement of proprioception using Tecnobody rehabilitation system. Methods Nine healthy volunteers [4 males,5 females,averaged age (22.8 ±0.68) years] participated in three consecutive measurements on both feet by using Tecnobody rehabilitation system for computerized proprioceptive assessment.Standard error of measurement(SEM),correlation coefficient and intraclass correlation coefficient(ICC) obtained from the three consecutive measurements were used to analyze the "Time"used in each measuring session,and the "average track error" (ATE) of the measurements. Results SEM values of "Time" in left foot and right foot were 3.07 ~ 3.83 and 6.65 ~ 8.44 respectively.ATE values in left foot and right foot were 1.33 ~ 1.97 and 1.39 ~ 1.91 respectively.The "Time" and ATE correlation coefficients of left foot / right foot were 0.919/0.6 and 0.808/0.831,respectively.The "Time" ICC values were 0.893/0.639 for left foot / right foot,respectively ; and the "ATE" ICC values were 0.716/0.734 for left foot / right foot,respectively. Conclusion The Tecnobody rehabilitation system provided a fairly good reliability in both "relative" and " absolute" values in quantitative evaluation of proprioception in the feet.These data in a larger amount may be useful for setting up variables and the standard values of the local population for reference in proprioceptive rehabilitation.%目的 研究Tecnobody康复系统定量评定本体感觉的可靠性.方法 健康人9例,其中男4例,女5例,年龄(22.8±0.68)岁,用Tecnobody按系统要求连续评定双足本体感觉3次.用重复测量标准误、简单相关系数、组内相关系数分析每次的耗时( Time)和平均轨迹差(ATE).结果 Time重复测量标准误左右分别为3.07~ 3.83和6.65~ 8.44,ATE左右分别为1.33 ~1.97和1.39 ~1.91;Time简单相关系数左右分别为0.919和0.62,ATE左右分别为0.808和0.831;Time组内

  14. Preliminary test results of a flight management algorithm for fuel conservative descents in a time based metered traffic environment. [flight tests of an algorithm to minimize fuel consumption of aircraft based on flight time

    Science.gov (United States)

    Knox, C. E.; Cannon, D. G.

    1979-01-01

    A flight management algorithm designed to improve the accuracy of delivering the airplane fuel efficiently to a metering fix at a time designated by air traffic control is discussed. The algorithm provides a 3-D path with time control (4-D) for a test B 737 airplane to make an idle thrust, clean configured descent to arrive at the metering fix at a predetermined time, altitude, and airspeed. The descent path is calculated for a constant Mach/airspeed schedule from linear approximations of airplane performance with considerations given for gross weight, wind, and nonstandard pressure and temperature effects. The flight management descent algorithms and the results of the flight tests are discussed.

  15. A DDC-based capacity controller of a direct expansion (DX) air conditioning (A/C) unit for simultaneous indoor air temperature and humidity control - Pt. 1: Control algorithms and preliminary controllability tests

    Energy Technology Data Exchange (ETDEWEB)

    Li, Zheng [Institute of Air Conditioning, China Academy of Building Research, Beijing 100013 (China); Deng, Shiming [Department of Building Services Engineering, The Hong Kong Polytechnic University, Kowloon, Hong Kong SAR (China)

    2007-01-15

    For residential buildings located in the subtropics, direct expansion (DX) air conditioning (A/C) units are commonly used. Most DX A/C units are currently equipped with single-speed compressors and supply fans, relying on on-off cycling compressors as a low-cost approach to maintain only indoor air dry-bulb temperature, resulting in either space overcooling or an uncontrolled equilibrium indoor relative humidity (RH) level. With the rapid development of A/C industry, the use of variable-speed compressor and supply fan has become more and more prevalent and practical. This paper, the first part of a two-part series, reports on the development of a novel direct digital control (DDC)-based capacity controller for a DX A/C unit having variable-speed compressor and supply fan to simultaneously control indoor air temperature and RH in a conditioned space served by the DX A/C unit. The controller is the first of its kind as a composite parameter, sensible heat ratio (SHR), is used as a controlled parameter. The core element of the capacity controller, a numerical calculation algorithm (NCA) is firstly presented. This is followed by reporting the results of preliminary controllability tests of the DDC-based capacity controller, which suggested that the controller developed could achieve a reasonable control accuracy, but with room for improvement with respect to control sensitivity. Part II of the two-part series reports on the further development of the controller to improve its control sensitivity, and the results of associated controllability tests. (author)

  16. 2016 TRI Preliminary Dataset

    Science.gov (United States)

    The TRI preliminary dataset includes the most current TRI data available and reflects toxic chemical releases and pollution prevention activities that occurred at TRI facilities during the 2016 calendar year.

  17. Preliminary Testing of Mycoleptodiscus terrestris Formulations

    Science.gov (United States)

    2009-03-01

    submersed macrophyte , Hydrilla verticillata (L.f.) Royle (hydrilla). BACKGROUND: As herbicide resistance becomes an increasing problem worldwide...Mycoleptodiscus terrestris, as a biocontrol agent for the management of Myriophyllum spicatum in Lake Guntersville Reservoir . Technical Report A-96-4

  18. Visual perception skills testing: preliminary results

    CSIR Research Space (South Africa)

    Smith, Adrew C

    2009-02-01

    Full Text Available Africa. Both schools practice the Montessori Method [1] of early- childhood schooling. School A is situated in an affluent suburb in the city of Pretoria. School B serves a township and is located approximately 70 km distant from School A. The ages... and Technology. REFERENCES 1. Montessori, M., The Montessori Method, Cosimo, Inc., 2006. 2. Smith, A.C., 2006. Tangible Cubes as Programming Objects; Artificial Reality and Telexistence (Hanzhou China, November 2006) IEEE Computer Society. 3. Smith, A...

  19. Preliminary test results of LAr prototype detector

    CERN Document Server

    Li, Pei-Xian; Yang, Chang-Gen; Zhang, Peng; Liu, Jin-Chang; Zhang, Yong-Pen; Guo, Cong; Wang, Yi

    2016-01-01

    WIMPs are a well-motivated galactic dark matter candidate. Liquid argon (LAr) is an attractive target for the direct detection of WIMPs. The LAr prototype detector is designed to study the technology and property of LAr detector. The prototype detector have an active volume containing 0.65 kg of liquid argon. The liquid nitrogen(LN) cooling system allows the temperature of liquid argon to be maintained at the boiling point (87.8 K) with fluctuations less than 0.1 K. The prototype was calibrated with a Na$^{22}$ source, with the light yield 1.591$\\pm$0.019 p.e./keV for the 511 keV gamma rays using the domestic-made argon purification system.

  20. Preliminary ECLSS waste water model

    Science.gov (United States)

    Carter, Donald L.; Holder, Donald W., Jr.; Alexander, Kevin; Shaw, R. G.; Hayase, John K.

    1991-01-01

    A preliminary waste water model for input to the Space Station Freedom (SSF) Environmental Control and Life Support System (ECLSS) Water Processor (WP) has been generated for design purposes. Data have been compiled from various ECLSS tests and flight sample analyses. A discussion of the characterization of the waste streams comprising the model is presented, along with a discussion of the waste water model and the rationale for the inclusion of contaminants in their respective concentrations. The major objective is to establish a methodology for the development of a waste water model and to present the current state of that model.

  1. Preliminary ECLSS waste water model

    Science.gov (United States)

    Carter, Donald L.; Holder, Donald W., Jr.; Alexander, Kevin; Shaw, R. G.; Hayase, John K.

    1991-01-01

    A preliminary waste water model for input to the Space Station Freedom (SSF) Environmental Control and Life Support System (ECLSS) Water Processor (WP) has been generated for design purposes. Data have been compiled from various ECLSS tests and flight sample analyses. A discussion of the characterization of the waste streams comprising the model is presented, along with a discussion of the waste water model and the rationale for the inclusion of contaminants in their respective concentrations. The major objective is to establish a methodology for the development of a waste water model and to present the current state of that model.

  2. Preliminary rock mechanics laboratory: Investigation plan

    Energy Technology Data Exchange (ETDEWEB)

    Oschman, K.P.; Hummeldorf, R.G.; Hume, H.R.; Karakouzian, M.; Vakili, J.E.

    1987-01-01

    This document presents the rationale for rock mechanics laboratory testing (including the supporting analysis and numerical modeling) planned for the site characterization of a nuclear waste repository in salt. This plan first identifies what information is required for regulatory and design purposes, and then presents the rationale for the testing that satisfies the required information needs. A preliminary estimate of the minimum sampling requirements for rock laboratory testing during site characterization is also presented. Periodic revision of this document is planned.

  3. Preliminary Sensorimotor and Cardiovascular Results from the Joint Russian and U.S. Pilot Field Test with Planning for the Full Field Test Beginning with the Year Long Intenational Space Station

    Science.gov (United States)

    Reschke, M. F.; Kozlovskaya, I. B.; Tomilovskaya, E. S.; Bloomberg, J. J.; Platts, S. H.; Rukavishnikov, I. V.; Fomina, E. V.; Stenger, M. B.; Lee, S. M. C.; Wood, S. J.; Mulavara, A. P.; Feiveson, A. H.; Cerisano, J. M.; Kofman, I. S.; Fisher, E. A.

    2014-01-01

    Ongoing collaborative research efforts between NASA's Neuroscience and Cardiovascular Laboratories, and the Institute of Biomedical Problems' (IBMP) Sensory-Motor and Countermeasures Laboratories have been measuring functional sensorimotor, cardiovascular and strength responses following bed rest, dry immersion, short duration (Space Shuttle) and long duration (Mir and International Space Station) space flights. While the unloading paradigms associated with dry immersion and bed rest does serve as acceptable flight analogs, testing of crew responses following the long duration flights previously has not been possible until a minimum of 24 hours after landing. As a result, it is not possible to estimate the nonlinear trend of the early (space flight crews beginning as soon after landing as possible (space flight.

  4. A Preliminary Study of the Ability of the 4Kscore test, the Prostate Cancer Prevention Trial-Risk Calculator and the European Research Screening Prostate-Risk Calculator for Predicting High-Grade Prostate Cancer.

    Science.gov (United States)

    Borque-Fernando, Á; Esteban-Escaño, L M; Rubio-Briones, J; Lou-Mercadé, A C; García-Ruiz, R; Tejero-Sánchez, A; Muñoz-Rivero, M V; Cabañuz-Plo, T; Alfaro-Torres, J; Marquina-Ibáñez, I M; Hakim-Alonso, S; Mejía-Urbáez, E; Gil-Fabra, J; Gil-Martínez, P; Ávarez-Alegret, R; Sanz, G; Gil-Sanz, M J

    2016-04-01

    To prevent the overdiagnosis and overtreatment of prostate cancer (PC), therapeutic strategies have been established such as active surveillance and focal therapy, as well as methods for clarifying the diagnosis of high-grade prostate cancer (HGPC) (defined as a Gleason score ≥7), such as multiparametric magnetic resonance imaging and new markers such as the 4Kscore test (4KsT). By means of a pilot study, we aim to test the ability of the 4KsT to identify HGPC in prostate biopsies (Bx) and compare the test with other multivariate prognostic models such as the Prostate Cancer Prevention Trial Risk Calculator 2.0 (PCPTRC 2.0) and the European Research Screening Prostate Cancer Risk Calculator 4 (ERSPC-RC 4). Fifty-one patients underwent a prostate Bx according to standard clinical practice, with a minimum of 10 cores. The diagnosis of HGPC was agreed upon by 4 uropathologists. We compared the predictions from the various models by using the Mann-Whitney U test, area under the ROC curve (AUC) (DeLong test), probability density function (PDF), box plots and clinical utility curves. Forty-three percent of the patients had PC, and 23.5% had HGPC. The medians of probability for the 4KsT, PCPTRC 2.0 and ERSPC-RC 4 were significantly different between the patients with HGPC and those without HGPC (p≤.022) and were more differentiated in the case of 4KsT (51.5% for HGPC [25-75 percentile: 25-80.5%] vs. 16% [P 25-75: 8-26.5%] for non-HGPC; p=.002). All models presented AUCs above 0.7, with no significant differences between any of them and 4KsT (p≥.20). The PDF and box plots showed good discriminative ability, especially in the ERSPC-RC 4 and 4KsT models. The utility curves showed how a cutoff of 9% for 4KsT identified all cases of HGPC and provided a 22% savings in biopsies, which is similar to what occurs with the ERSPC-RC 4 models and a cutoff of 3%. The assessed predictive models offer good discriminative ability for HGPCs in Bx. The 4KsT is a good classification

  5. UVISS preliminary visibility analysis

    DEFF Research Database (Denmark)

    Betto, Maurizio

    1998-01-01

    The goal of this work is to obtain a preliminary assessment of the sky visibility for anastronomical telescope located on the express pallet of the International SpaceStation (ISS)} taking into account the major constraints imposed on the instrument by the ISSattitude and structure. Part of the w......The goal of this work is to obtain a preliminary assessment of the sky visibility for anastronomical telescope located on the express pallet of the International SpaceStation (ISS)} taking into account the major constraints imposed on the instrument by the ISSattitude and structure. Part...

  6. UVISS preliminary visibility analysis

    DEFF Research Database (Denmark)

    Betto, Maurizio

    1998-01-01

    The goal of this work is to obtain a preliminary assessment of the sky visibility for anastronomical telescope located on the express pallet of the International SpaceStation (ISS)} taking into account the major constraints imposed on the instrument by the ISSattitude and structure. Part...

  7. Preliminary Investigation of a Paraglider

    Science.gov (United States)

    Rogallo, Francis M.; Lowry, John G.; Croom, Delwin R.; Taylor, Robert T.

    1960-01-01

    A preliminary investigation of the aerodynamic and control characteristics of a flexible glider similar to a parachute in construction has been made at the Langley Research Center to evaluate its capabilities as a reentry glider. Preliminary weight estimates of the proposed vehicle indicate that such a structure can be made with extremely low wing loading. Maximum temperatures during the reentry maneuver might be held as low as about 1,500 F. The results of wind-tunnel and free-glide tests show that the glider when constructed of nonporous material performed extremely well at subsonic speeds and could be flown at angles of attack from about 200 to 900. At supersonic speeds the wing showed none of the unfavorable tendencies exhibited by conventional parachutes at these speeds, such as squidding and breathing. Several methods of packing and deploying the glider have been successfully demonstrated. The results of this study indicate that this flexible-lifting-surface concept may provide a lightweight controllable paraglider for manned space vehicles.

  8. On Preliminary Breakdown

    Science.gov (United States)

    Beasley, W. H.; Petersen, D.

    2013-12-01

    The preliminary breakdown phase of a negative cloud-to-ground lightning flash was observed in detail. Observations were made with a Photron SA1.1 high-speed video camera operating at 9,000 frames per second, fast optical sensors, a flat-plate electric field antenna covering the SLF to MF band, and VHF and UHF radio receivers with bandwidths of 20 MHz. Bright stepwise extensions of a negative leader were observed at an altitude of 8 km during the first few milliseconds of the flash, and were coincident with bipolar electric field pulses called 'characteristic pulses'. The 2-D step lengths of the preliminary processes were in excess of 100 meters, with some 2-D step lengths in excess of 200 meters. Smaller and shorter unipolar electric field pulses were superposed onto the bipolar electric field pulses, and were coincident with VHF and UHF radio pulses. After a few milliseconds, the emerging negative stepped leader system showed a marked decrease in luminosity, step length, and propagation velocity. Details of these events will be discussed, including the possibility that the preliminary breakdown phase consists not of a single developing lightning leader system, but of multiple smaller lightning leader systems that eventually join together into a single system.

  9. Institutional Repositories in India: A preliminary study

    OpenAIRE

    2011-01-01

    This preliminary study investigates various aspects of institutional repositories (IR’s) developed in India. The present study has identified the existence of 16 functional IRs some of which were not registered in any of the directories such as ROAR, Open DOAR. The study explores the timeline involved in planning, pilot testing, to system implementation of IR, exploratory activities conducted before implementing IR, its anticipated benefits.

  10. Preliminary tests to determine the fatigue curve of the Ibis ACSR (Aluminum Cable Steel Reinforced) conductor; Ensaios preliminares para determinacao da curva de fadiga do cabo condutor ACSR Ibis

    Energy Technology Data Exchange (ETDEWEB)

    Rosa, Daniel M. [Universidade de Brasilia (UnB-Gama), DF (Brazil)], E-mail: danielrosa@unb.br; Fadel, Aida A.; Araujo, Jose Alexander; Ferreira, Jorge Luiz A.; Henriques, Antonio Manoel D. [Universidade de Brasilia (EnM/UnB), DF (Brazil). Dept. de Engenharia Mecanica], Emails: aida@unb.br, alex07@unb.br, jorge@unb.br, Henriques@unb.br; Hortencio, Tania M.O.S. [Companhia Energetica de Goias Distribuicao S.A. (CELG D), Goiania, GO (Brazil)], E-mail: tania.hortencio@celg.com.br

    2009-07-01

    The aim of this work was to present a fretting fatigue experimental rig for overhead conductors and to carry out a set of experiments to obtain life estimative for a standard Ibis ACSR, Aluminium Conductor Steel Reinforced. A preliminary S-N (Wohler) Curve was obtained in the medium high cycle fatigue regime. Experiments considered the occurrence of at least two wire breaks to obtain each point of the S-N curve, which was compared to CIGRE's Safe Border Line (CSBL). The experimental results showed five to ten times large lives than the ones provided by CSBL adoption. (author)

  11. Preliminary design package for prototype solar heating system

    Science.gov (United States)

    1978-01-01

    A summary is given of the preliminary analysis and design activity on solar heating systems. The analysis was made without site specific data other than weather; therefore, the results indicate performance expected under these special conditions. Major items include system candidates, design approaches, trade studies and other special data required to evaluate the preliminary analysis and design. The program calls for the development and delivery of eight prototype solar heating and cooling systems for installation and operational test.

  12. Preliminary hazards analysis -- vitrification process

    Energy Technology Data Exchange (ETDEWEB)

    Coordes, D.; Ruggieri, M.; Russell, J.; TenBrook, W.; Yimbo, P. [Science Applications International Corp., Pleasanton, CA (United States)

    1994-06-01

    This paper presents a Preliminary Hazards Analysis (PHA) for mixed waste vitrification by joule heating. The purpose of performing a PHA is to establish an initial hazard categorization for a DOE nuclear facility and to identify those processes and structures which may have an impact on or be important to safety. The PHA is typically performed during and provides input to project conceptual design. The PHA is then followed by a Preliminary Safety Analysis Report (PSAR) performed during Title 1 and 2 design. The PSAR then leads to performance of the Final Safety Analysis Report performed during the facility`s construction and testing. It should be completed before routine operation of the facility commences. This PHA addresses the first four chapters of the safety analysis process, in accordance with the requirements of DOE Safety Guidelines in SG 830.110. The hazards associated with vitrification processes are evaluated using standard safety analysis methods which include: identification of credible potential hazardous energy sources; identification of preventative features of the facility or system; identification of mitigative features; and analyses of credible hazards. Maximal facility inventories of radioactive and hazardous materials are postulated to evaluate worst case accident consequences. These inventories were based on DOE-STD-1027-92 guidance and the surrogate waste streams defined by Mayberry, et al. Radiological assessments indicate that a facility, depending on the radioactive material inventory, may be an exempt, Category 3, or Category 2 facility. The calculated impacts would result in no significant impact to offsite personnel or the environment. Hazardous materials assessment indicates that a Mixed Waste Vitrification facility will be a Low Hazard facility having minimal impacts to offsite personnel and the environment.

  13. Environmental Survey preliminary report

    Energy Technology Data Exchange (ETDEWEB)

    1988-04-01

    This report presents the preliminary findings from the first phase of the Environmental Survey of the United States Department of Energy (DOE) Sandia National Laboratories conducted August 17 through September 4, 1987. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with Sandia National Laboratories-Albuquerque (SNLA). The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at SNLA, and interviews with site personnel. 85 refs., 49 figs., 48 tabs.

  14. Ruiz Volcano: Preliminary report

    Science.gov (United States)

    Ruiz Volcano, Colombia (4.88°N, 75.32°W). All times are local (= GMT -5 hours).An explosive eruption on November 13, 1985, melted ice and snow in the summit area, generating lahars that flowed tens of kilometers down flank river valleys, killing more than 20,000 people. This is history's fourth largest single-eruption death toll, behind only Tambora in 1815 (92,000), Krakatau in 1883 (36,000), and Mount Pelée in May 1902 (28,000). The following briefly summarizes the very preliminary and inevitably conflicting information that had been received by press time.

  15. Cusum charts for preliminary analysis of individual observations

    NARCIS (Netherlands)

    A.J. Koning (Alex); R.J.M.M. Does (Ronald)

    1997-01-01

    textabstractA preliminary Cusum chart based on individual observations is developed from the uniformly most powerful test for the detection of linear trends. This Cusum chart is compared with several of its competitors which are based on the likelihood ratio test and on transformations of standardiz

  16. A preliminary evaluation of post-combustion CO{sub 2} capture performance in a pilot plant test using mono-ethanolamine at a lignite-fuelled power station in Australia

    Energy Technology Data Exchange (ETDEWEB)

    Y. Artanto; M.I. Attalla; A. Cottrell; J. Jansen; J.M. McGregor; E.E.B. Meuleman; S. Morgan; M. Osborn; P. Pearson; L. Wardhaugh; P.H.M. Feron [CSIRO, Clayton, Vic. (Australia). Division of Energy Technology

    2009-07-01

    CSIRO has developed three PCC pilot plants to be connected to the flue gas of coal-fuelled power stations in Australia. Currently, two pilot plants are in operation. This paper presents results achieved with CSIRO's mobile plant which is fed with real flue gas from a lignite-fuelled power station at Loy Yang, Victoria, Australia. The findings of preliminary pilot plant trials are evaluated through comparison with results derived from WinSim Design II process simulation. The pilot plant operates with a 30% mono-ethanolamine (MEA) solution to capture CO{sub 2} under nominal conditions defined as a flue gas rate of 150 m{sup 3}/h and a solvent rate of 0.34 m{sup 3}/h. These conditions are set as the base-line for further experiments with different conditions. Different flue gas and solvent flow rates (three selected cases) were examined in the pilot plant in order to study the effects on CO{sub 2} recovery, heat reboiler duty, lean solvent loading and temperature profiles in the absorber columns. Gas and liquid sample analyses were used to determine the amount of CO{sub 2} recovered. The CO{sub 2} balance was also calculated in this study. The CO{sub 2} recovered (15-20 kg/h), based on liquid analysis, are below values from simulation modeling. The CO{sub 2} recovery is approximately 95% in simulation, while experiments indicate CO{sub 2} recovery of 60-83%. Preliminary results on comparing temperature profiles in the absorber columns show similar trends. 7 refs., 6 figs., 3 tabs.

  17. A Preliminary Jupiter Model

    CERN Document Server

    Hubbard, W B

    2016-01-01

    In anticipation of new observational results for Jupiter's axial moment of inertia and gravitational zonal harmonic coefficients from the forthcoming Juno orbiter, we present a number of preliminary Jupiter interior models. We combine results from ab initio computer simulations of hydrogen-helium mixtures, including immiscibility calculations, with a new nonperturbative calculation of Jupiter's zonal harmonic coefficients, to derive a self-consistent model for the planet's external gravity and moment of inertia. We assume helium rain modified the interior temperature and composition profiles. Our calculation predicts zonal harmonic values to which measurements can be compared. Although some models fit the observed (pre-Juno) second- and fourth-order zonal harmonics to within their error bars, our preferred reference model predicts a fourth-order zonal harmonic whose absolute value lies above the pre-Juno error bars. This model has a dense core of about 12 Earth masses, and a hydrogen-helium-rich envelope with...

  18. A Preliminary Jupiter Model

    Science.gov (United States)

    Hubbard, W. B.; Militzer, B.

    2016-03-01

    In anticipation of new observational results for Jupiter's axial moment of inertia and gravitational zonal harmonic coefficients from the forthcoming Juno orbiter, we present a number of preliminary Jupiter interior models. We combine results from ab initio computer simulations of hydrogen-helium mixtures, including immiscibility calculations, with a new nonperturbative calculation of Jupiter's zonal harmonic coefficients, to derive a self-consistent model for the planet's external gravity and moment of inertia. We assume helium rain modified the interior temperature and composition profiles. Our calculation predicts zonal harmonic values to which measurements can be compared. Although some models fit the observed (pre-Juno) second- and fourth-order zonal harmonics to within their error bars, our preferred reference model predicts a fourth-order zonal harmonic whose absolute value lies above the pre-Juno error bars. This model has a dense core of about 12 Earth masses and a hydrogen-helium-rich envelope with approximately three times solar metallicity.

  19. Thermal energy storage in aquifiers: preliminary information

    Energy Technology Data Exchange (ETDEWEB)

    Allen, R.D.

    1979-12-01

    Topics discussed include: conceptual designs; numerical modelling; field experiments; relevant technical information; feasibility studies; preliminary aquifer selection considerations; and preliminary design and operating considerations. (TFD)

  20. Preliminary design for a maglev development facility

    Energy Technology Data Exchange (ETDEWEB)

    Coffey, H.T.; He, J.L.; Chang, S.L.; Bouillard, J.X.; Chen, S.S.; Cai, Y.; Hoppie, L.O.; Lottes, S.A.; Rote, D.M. [Argonne National Lab., IL (United States); Zhang, Z.Y. [Polytechnic Univ., Brooklyn, NY (United States); Myers, G.; Cvercko, A. [Sterling Engineering, Westchester, IL (United States); Williams, J.R. [Alfred Benesch and Co., Chicago, IL (United States)

    1992-04-01

    A preliminary design was made of a national user facility for evaluating magnetic-levitation (maglev) technologies in sizes intermediate between laboratory experiments and full-scale systems. A technical advisory committee was established and a conference was held to obtain advice on the potential requirements of operational systems and how the facility might best be configured to test these requirements. The effort included studies of multiple concepts for levitating, guiding, and propelling maglev vehicles, as well as the controls, communications, and data-acquisition and -reduction equipment that would be required in operating the facility. Preliminary designs for versatile, dual 2-MVA power supplies capable of powering attractive or repulsive systems were developed. Facility site requirements were identified. Test vehicles would be about 7.4 m (25 ft) long, would weigh form 3 to 7 metric tons, and would operate at speeds up to 67 m/s (150 mph) on a 3.3-km (2.05-mi) elevated guideway. The facility would utilize modular vehicles and guideways, permitting the substitution of levitation, propulsion, and guideway components of different designs and materials for evaluation. The vehicle would provide a test cell in which individual suspension or propulsion components or subsystems could be tested under realistic conditions. The system would allow economical evaluation of integrated systems under varying weather conditions and in realistic geometries.

  1. Preliminary design for a maglev development facility

    Energy Technology Data Exchange (ETDEWEB)

    Coffey, H.T.; He, J.L.; Chang, S.L.; Bouillard, J.X.; Chen, S.S.; Cai, Y.; Hoppie, L.O.; Lottes, S.A.; Rote, D.M. (Argonne National Lab., IL (United States)); Zhang, Z.Y. (Polytechnic Univ., Brooklyn, NY (United States)); Myers, G.; Cvercko, A. (Sterling Engineering, Westchester, IL (United States)); Williams, J.R. (Alfred Benesch and Co., Chicago, IL (United States))

    1992-04-01

    A preliminary design was made of a national user facility for evaluating magnetic-levitation (maglev) technologies in sizes intermediate between laboratory experiments and full-scale systems. A technical advisory committee was established and a conference was held to obtain advice on the potential requirements of operational systems and how the facility might best be configured to test these requirements. The effort included studies of multiple concepts for levitating, guiding, and propelling maglev vehicles, as well as the controls, communications, and data-acquisition and -reduction equipment that would be required in operating the facility. Preliminary designs for versatile, dual 2-MVA power supplies capable of powering attractive or repulsive systems were developed. Facility site requirements were identified. Test vehicles would be about 7.4 m (25 ft) long, would weigh form 3 to 7 metric tons, and would operate at speeds up to 67 m/s (150 mph) on a 3.3-km (2.05-mi) elevated guideway. The facility would utilize modular vehicles and guideways, permitting the substitution of levitation, propulsion, and guideway components of different designs and materials for evaluation. The vehicle would provide a test cell in which individual suspension or propulsion components or subsystems could be tested under realistic conditions. The system would allow economical evaluation of integrated systems under varying weather conditions and in realistic geometries.

  2. Preliminary design for a MAGLEV development facility

    Science.gov (United States)

    Coffey, H. T.; He, J. L.; Chang, S. L.; Bouillard, J. X.; Chen, S. S.; Cai, Y.; Hoppie, L. O.; Lottes, S. A.; Rote, D. M.; Zhang, Z. Y.

    1992-04-01

    A preliminary design was made of a national user facility for evaluating magnetic-levitation (maglev) technologies in sizes intermediate between laboratory experiments and full-scale systems. A technical advisory committee was established and a conference was held to obtain advice on the potential requirements of operational systems and how the facility might best be configured to test these requirements. The effort included studies of multiple concepts for levitating, guiding, and propelling maglev vehicles, as well as the controls, communications, and data-acquisition and -reduction equipment that would be required in operating the facility. Preliminary designs for versatile, dual 2-MVA power supplies capable of powering attractive or repulsive systems were developed. Facility site requirements were identified. Test vehicles would be about 7.4 m (25 ft) long, would weigh from 3 to 7 metric tons, and would operate at speeds up to 67 m/s (150 mph) on a 3.3-km (2.05-mi) elevated guideway. The facility would utilize modular vehicles and guideways, permitting the substitution of levitation, propulsion, and guideway components of different designs and materials for evaluation. The vehicle would provide a test cell in which individual suspension or propulsion components or subsystems could be tested under realistic conditions. The system would allow economical evaluation of integrated systems under varying weather conditions and in realistic geometries.

  3. The Preliminaries of a Reference

    DEFF Research Database (Denmark)

    Butler, Graham; Sadl, Urska

    2017-01-01

    by the reasons why the Court after an oral hearing held in the presence of the parties and eight intervening Member States, and after hearing the Advocate General did not deliver one. The comment examines the legal framework, as well as the detailed procedural rules and guidelines that govern the cooperation...... of national courts in the preliminary reference procedure. It highlights the fact that preliminary references can only work when the preliminaries of a reference – the culture of sincere cooperation and litigation, efficient communication and flexible procedural rules – are in place....

  4. A PRELIMINARY JUPITER MODEL

    Energy Technology Data Exchange (ETDEWEB)

    Hubbard, W. B. [Lunar and Planetary Laboratory, The University of Arizona, Tucson, AZ 85721 (United States); Militzer, B. [Department of Earth and Planetary Science, Department of Astronomy, University of California, Berkeley, CA 94720 (United States)

    2016-03-20

    In anticipation of new observational results for Jupiter's axial moment of inertia and gravitational zonal harmonic coefficients from the forthcoming Juno orbiter, we present a number of preliminary Jupiter interior models. We combine results from ab initio computer simulations of hydrogen–helium mixtures, including immiscibility calculations, with a new nonperturbative calculation of Jupiter's zonal harmonic coefficients, to derive a self-consistent model for the planet's external gravity and moment of inertia. We assume helium rain modified the interior temperature and composition profiles. Our calculation predicts zonal harmonic values to which measurements can be compared. Although some models fit the observed (pre-Juno) second- and fourth-order zonal harmonics to within their error bars, our preferred reference model predicts a fourth-order zonal harmonic whose absolute value lies above the pre-Juno error bars. This model has a dense core of about 12 Earth masses and a hydrogen–helium-rich envelope with approximately three times solar metallicity.

  5. Preliminary reference Earth model

    Science.gov (United States)

    Dziewonski, Adam M.; Anderson, Don L.

    1981-06-01

    A large data set consisting of about 1000 normal mode periods, 500 summary travel time observations, 100 normal mode Q values, mass and moment of inertia have been inverted to obtain the radial distribution of elastic properties, Q values and density in the Earth's interior. The data set was supplemented with a special study of 12 years of ISC phase data which yielded an additional 1.75 × 10 6 travel time observations for P and S waves. In order to obtain satisfactory agreement with the entire data set we were required to take into account anelastic dispersion. The introduction of transverse isotropy into the outer 220 km of the mantle was required in order to satisfy the shorter period fundamental toroidal and spheroidal modes. This anisotropy also improved the fit of the larger data set. The horizontal and vertical velocities in the upper mantle differ by 2-4%, both for P and S waves. The mantle below 220 km is not required to be anisotropic. Mantle Rayleigh waves are surprisingly sensitive to compressional velocity in the upper mantle. High S n velocities, low P n velocities and a pronounced low-velocity zone are features of most global inversion models that are suppressed when anisotropy is allowed for in the inversion. The Preliminary Reference Earth Model, PREM, and auxiliary tables showing fits to the data are presented.

  6. Arapahoe NWR diversion reconstruction : Preliminary

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This is a preliminary plan for a diversion reconstruction for Hubbard #2. Oklahoma #1, Dryer, Hill and Crowder sites on the Arapahoe National Wildlife Refuge.

  7. Preliminary Research on the Testing Model of the Final Examination for Non-English Majors%大学英语期末测试综合模式初探

    Institute of Scientific and Technical Information of China (English)

    袁崛远; 陈新河

    2012-01-01

    The present testing model of the final examination for non-English majors is proposed on the base of an integrative analysis of the existent testing models at home at abroad,absorbing their merits and getting rid of the demerits.Closely connected with features of the final examinations in China,this model includes a structure of the testing contents and a diagram of testing process.It is believed that the present model can help to solve some long existent problems in the final examinations for non-English majors so as to improve their testing validity and reliability.%大学英语期末测试综合模式是在对国内外已有的测试模式进行综合分析评价的基础之上提出来的,它结合了我国大学英语期末测试的特点,包括期末测试的分数结构图和测试流程图,它将有利于解决大学英语期末测试存在的实际问题,从而提高其信度和效度。

  8. Uptake of community-based, self-collected HPV testing vs. visual inspection with acetic acid for cervical cancer screening in Kampala, Uganda: preliminary results of a randomised controlled trial.

    Science.gov (United States)

    Moses, Erin; Pedersen, Heather N; Mitchell, Sheona M; Sekikubo, Musa; Mwesigwa, David; Singer, Joel; Biryabarema, Christine; Byamugisha, Josaphat K; Money, Deborah M; Ogilvie, Gina S

    2015-10-01

    To compare two cervical cancer screening methods: community-based self-collection of high-risk human papillomavirus (HR-HPV) testing and visual inspection with acetic acid (VIA). Pilot randomised controlled trial of 500 women aged 30-65 in the community of Kisenyi, Uganda. Women randomised to self-collection-based HR-HPV testing provided a cervico-vaginal swab for HR-HPV, and results were provided by phone after laboratory testing. Women who tested HPV positive were referred for VIA at the local health unit. Women randomised to VIA underwent screening at the local health unit, where women who tested positive with VIA were provided cryotherapy at time of screening, as per local standard of care. Women were referred for colposcopy when indicated. Outcome measures were uptake of screening, HR-HPV prevalence, VIA result and treatment rates. In the HR-HPV arm, 248 of 250 (p < 0.01) women provided samples, while in the VIA arm, 121 of 250 (48.4%) women attended screening. Among the 73 of 248 HR-HPV-positive women, 45.2% (N = 33) attended VIA screening for follow-up, 21.2% (N = 7) of whom screened positive; five received treatment and two were missing clinical follow-up records. Of the 121 women in the VIA arm who attended screening, 13.2% (N = 16) screened positive; seven received cryotherapy, three refused treatment, five were referred to colposcopy; and one woman had suspected cervical cancer and received treatment after confirmatory testing. This pilot study demonstrated trial feasibility and willingness of the women to participate and be randomised successfully into the two arms. Self-collection-based cervical cancer screening had a higher uptake than VIA. © 2015 John Wiley & Sons Ltd.

  9. DEFINITION OF A NEW LEVEL ONE TEST CASE MEASUREMENTS OF EQUILIBRIUM RADIATION FROM AN INDUCTIVELY COUPLED PLASMA IN THE NEAR-UV TO NEAR-IR SPECTRAL REGION FOR A TITAN-TYPE N2-CH4 MIXTURE. PRELIMINARY RESULTS

    OpenAIRE

    Vacher, Damien; André, Pascal; Lino Da Silva, Mario; Dudeck, Michel; Faure, Géraldine

    2008-01-01

    International audience; A test case, using a similar methodology and experimental set-up than previous test case TC5-Level 1 is presented in this paper. An inductively coupled plasma torch, working at atmospheric pressure, is used to create N2-CH4 Titan-like plasma (98%N2 - 2%CH4). The operating frequency and power are 64 MHz and 3 kW respectively. This kind of apparatus allows obtaining plasma in chemical and quasi-thermal equilibrium The spectral measurements cover the [300-800] nm range an...

  10. Preliminary identification of problem soils for infrastructure projects

    CSIR Research Space (South Africa)

    Paige-Green, P

    2008-11-01

    Full Text Available soils are those within the top 1.0m or 1.5m of the soil profile, a mechanism for evaluating these materials without preliminary filed work and testing would be invaluable. Since 1971, the Department of Agriculture has systematically mapped the soils...

  11. A Preliminary Study on Cathodic Prevention in Reinforced Mortar

    NARCIS (Netherlands)

    Koleva, D.A.; Van Breugel, K.; Mol, J.M.C.; De Wit, J.H.W.

    2010-01-01

    This work presents the preliminary tests on the performance of cathodic prevention (CPre) in reinforced mortar, subjected to aggressive (10% NaCl environment). Cathodic prevention is an electrochemical technique for minimizing, actually "preventing" any eventual corrosion of the steel bars in reinfo

  12. Experimental Use of Signed Presentations of the Verbal Scale of the WISC-R with Profoundly Deaf Children: A Preliminary Report of the Sign Selection Process and Experimental Test Procedures.

    Science.gov (United States)

    Miller, Margery Silberman

    The paper provides a theoretical framework for the inclusion of a verbal intelligence test as part of the psychodiagnostic assessment battery used with deaf children. Descriptions are provided for three selected sign language varieties being used in a study designed to examine performance of 30 deaf children (9-16 years old) on signed…

  13. Experimental Use of Signed Presentations of the Verbal Scale of the WISC-R with Profoundly Deaf Children: A Preliminary Report of the Sign Selection Process and Experimental Test Procedures.

    Science.gov (United States)

    Miller, Margery Silberman

    The paper provides a theoretical framework for the inclusion of a verbal intelligence test as part of the psychodiagnostic assessment battery used with deaf children. Descriptions are provided for three selected sign language varieties being used in a study designed to examine performance of 30 deaf children (9-16 years old) on signed…

  14. A MULTIPLE TESTING OF THE ABC METHOD AND THE DEVELOPMENT OF A SECOND GENERATION MODEL. PART I, PRELIMINARY DISCUSSIONS OF METHODOLOGY. SUPPLEMENT, COMPUTER PROGRAMS OF THE HDL INFORMATION SYSTEMS.

    Science.gov (United States)

    ALTMANN, BERTHOLD; BROWN, WILLIAM G.

    THE FIRST-GENERATION APPROACH BY CONCEPT (ABC) STORAGE AND RETRIEVAL METHOD, A METHOD WHICH UTILIZES AS A SUBJECT APPROACH APPROPRIATE STANDARDIZED ENGLISH-LANGUAGE STATEMENTS PROCESSED AND PRINTED IN A PERMUTED INDEX FORMAT, UNDERWENT A PERFORMANCE TEST, THE PRIMARY OBJECTIVE OF WHICH WAS TO SPOT DEFICIENCIES AND TO DEVELOP A SECOND-GENERATION…

  15. A MULTIPLE TESTING OF THE ABC METHOD AND THE DEVELOPMENT OF A SECOND GENERATION MODEL. PART I, PRELIMINARY DISCUSSIONS OF METHODOLOGY. SUPPLEMENT, COMPUTER PROGRAMS OF THE HDL INFORMATION SYSTEMS.

    Science.gov (United States)

    ALTMANN, BERTHOLD; BROWN, WILLIAM G.

    THE FIRST-GENERATION APPROACH BY CONCEPT (ABC) STORAGE AND RETRIEVAL METHOD, A METHOD WHICH UTILIZES AS A SUBJECT APPROACH APPROPRIATE STANDARDIZED ENGLISH-LANGUAGE STATEMENTS PROCESSED AND PRINTED IN A PERMUTED INDEX FORMAT, UNDERWENT A PERFORMANCE TEST, THE PRIMARY OBJECTIVE OF WHICH WAS TO SPOT DEFICIENCIES AND TO DEVELOP A SECOND-GENERATION…

  16. Method of boundary testing of the electric circuits and its application for calculating electric tolerances. [electric equipment tests

    Science.gov (United States)

    Redkina, N. P.

    1974-01-01

    Boundary testing of electric circuits includes preliminary and limiting tests. Preliminary tests permit determination of the critical parameters causing the greatest deviation of the output parameter of the system. The boundary tests offer the possibility of determining the limits of the fitness of the system with simultaneous variation of its critical parameters.

  17. A preliminary bending fatigue spectrum for steel monostrand cables

    DEFF Research Database (Denmark)

    Winkler, Jan; Fischer, Gregor; Georgakis, Christos T.;

    2011-01-01

    This paper presents the results of the experimental study on the bending fatigue resistance of high-strength steel monostrand cables. From the conducted fatigue tests in the high-stress, low-cycle region, a preliminary bending fatigue spectrum is derived for the estimation of monostrand cable...... service life expectancy. The presented preliminary bending fatigue spectrum of high-strength monostrands is currently unavailable in the published literature. The presented results provide relevant information on the bending mechanism and fatigue characteristics of monostrand steel cables in tension...

  18. Preliminary design package for prototype solar heating and cooling systems

    Science.gov (United States)

    1978-01-01

    A summary is given of the preliminary analysis and design activity on solar heating and cooling systems. The analysis was made without site specific data other than weather; therefore, the results indicate performance expected under these special conditions. Major items include a market analysis, design approaches, trade studies and other special data required to evaluate the preliminary analysis and design. The program calls for the development and delivery of eight prototype solar heating and cooling systems for installation and operational test. Two heating and six heating and cooling units will be delivered for Single Family Residences, Multiple-family Residences and commercial applications.

  19. 食品微生物多轮次能力验证方案初探%A preliminary study on the food microbiological multi -round proficiency testing program

    Institute of Scientific and Technical Information of China (English)

    刘淑艳; 王刚; 于珂; 殷国建; 庞艳华; 卢行安

    2012-01-01

    目的 探讨微生物多轮次能力验证方案及其在考察参试实验室检测能力的持续满意情况和评价实验室整体检测水平中的作用.方法 通过食品微生物两轮次能力验证PTC-T013、9个微生物检测项目、11个检测样品分别进行5项定量检测和6项定性检测来考察参试实验室的检测水平;定量样品采用Z-比分数统计分析,定性样品直接与设定值比较,两轮次结果进行综合比较分析.结果 71.7%实验室取得了满意的结果,虽然两轮不满意的结果数相差不大(5.3%和4.3%),但是第2轮出现不满意结果的实验室数量明显减少(21.7%和8.7%).结论 多轮次能力验证方案为参试实验室提供更多的选择;其结果能更真实地反映出参试单位的持续满意状况及整体检测水平.%Objective To investigate the efficacy of a food microbiological multi-round proficiency testing program and to evaluate its role in the comprehensive inspection capabilities of participated laboratories. Methods Two rounds of food microbiological performance testing schemes (PTC-T013) containing 9 test items, 11 test samples, 5 quantitative analysis and 6 qualitative analysis were conducted to detect the performance of participated laboratories. The results of Z-score statistics and comparing with assigned values were assessed quantitatively and qualitatively. Results Satisfied results were achieved in 71. 7% of participants. The overall performance of the laboratories was improved in the second testing round. The unsatisfied laboratories were decreased from 21. 7% to 8. 1% . Conclusion Food microbiological multi-round proficiency testing could provide more options for participant laboratories. The evaluated results could reflect the continuing performance and the overall detection level of participant laboratories.

  20. The Danish National Tests

    DEFF Research Database (Denmark)

    Beuchert, Louise Voldby; Nandrup, Anne Brink

    In 2010, the Danish National Tests were implemented in the public compulsory schools as a mean of evaluating the performance of the public school system. The extensive test program consists of ten mandatory tests in six subjects in grades 2 through 8. In this paper, we share our insights from...... within each test and argue that this is often a more feasible measure for data analyses compared to the transformed test score presented to pupils and teachers. We provide the reader with preliminary analyses of the relation between pupils' national test results and a wide range of pupil background...

  1. Preliminary Study on Testing Guidelines for Distinctness, Uniformity and Stability of Passiflora L.%西番莲属植物新品种(DUS)测试指南的研制初报

    Institute of Scientific and Technical Information of China (English)

    高玲; 徐丽; 刘迪发; 洪彩香; 张如莲

    2012-01-01

    According to the testing theory and technology of distinctness, uniformity and stability of new varieties of plants, based on the resources in and abroad and UPOV guidelines ofPassiflora edulis Sims, in this paper, the subject, selection and adoption of characteristics, states of expression and selection of standard varieties, assessment of DUS of the Testing Guidelines for Passion Fruit (Passiflora L.) were elucidated in detail. The DUS test guidelines for passion fruit will provide technology structure for this kind of new variety and have great values for tropical area to accelerate the development of plant variety protection.%根据植物新品种特异性、一致性和稳定性(简称DUS)测试的原理和技术规则,参考UPOV西番莲的测试指南,结合国内外资源,研制适用于我国西番莲属植物新品种测试的指南,对其适用对象、性状的选择与确定、性状分级、标准品种的选用和DUS判定标准进行详细研讨,为西番莲属植物新品种的授权提供测试技术的支撑,为热区植物测试技术规程的建设与完善提供参考。

  2. Preliminary characterization of abandoned septic tank systems. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    This report documents the activities and findings of the Phase I Preliminary Characterization of Abandoned Septic Tank Systems. The purpose of the preliminary characterization activity was to investigate the Tiger Team abandoned septic systems (tanks and associated leachfields) for the purpose of identifying waste streams for closure at a later date. The work performed was not to fully characterize or remediate the sites. The abandoned systems potentially received wastes or effluent from buildings which could have discharged non-domestic, petroleum hydrocarbons, hazardous, radioactive and/or mixed wastes. A total of 20 sites were investigated for the preliminary characterization of identified abandoned septic systems. Of the 20 sites, 19 were located and characterized through samples collected from each tank(s) and, where applicable, associated leachfields. The abandoned septic tank systems are located in Areas 5, 12, 15, 25, and 26 on the Nevada Test Site.

  3. Considerations for GPU SEE Testing

    Science.gov (United States)

    Wyrwas, Edward J.

    2017-01-01

    This presentation will discuss the considerations an engineer should take to perform Single Event Effects (SEE) testing on GPU devices. Notable topics will include setup complexity, architecture insight which permits cross platform normalization, acquiring a reasonable detail of information from the test suite, and a few lessons learned from preliminary testing.

  4. Preliminary Design of a Pendulum Experiment for Searching for a Lorentz-Violation Signal

    CERN Document Server

    Shao, Cheng-Gang; Tan, Yu-Jie

    2016-01-01

    This work mainly presents a preliminary design for a pendulum experiment with both the source mass and the test mass in a striped pattern to amplify the Lorentz-violation signal, since the signal is sensitive to edge effects.

  5. Preliminary Test of the Werry-Weiss-Peters Activity Rating Scale%韦里-威斯-彼得斯活动水平评定量表的初步测试

    Institute of Scientific and Technical Information of China (English)

    姜秀举; 苏林雁; 罗学荣

    2001-01-01

    Objective: To evaluate the utility of the Werry-Weiss-Peters Activity Rating Scale (WWPARS) for children with a Chinese background. Methods:In the city of Changsha, 465 normal children aged 8~12 in two primary schools and 27 ADHD children in an outpatient department were tested with WWPARS. Psychometric properties of the scale were analyzed for reliability and validity. Results: While levels of activity increased with age for all children, there was no significant difference between the two groups assessed. The scale attained good reliability and validity. Conclusion: This scale can be applied for evaluation of activity levels for Chinese children.

  6. THE EFFECTS OF PRELIMINARY RULINGS

    Directory of Open Access Journals (Sweden)

    Iuliana-Mădălina LARION

    2015-07-01

    Full Text Available The study analyses the effects of the preliminary rulings rendered by the Court of Justice for the judicial body that made the reference and for other bodies dealing with similar cases, for the member states, for the European Union’ s institutions and for EU legal order. Starting from the binding effect of the preliminary judgment for national judicial bodies, which requires them to follow the ruling or make a new reference, to the lack of precedent doctrine in EU law, continuing with the possibility to indirectly verify the compatibility of national law of the member states with EU law and ending with the administrative or legislative measures that can or must be taken by the member states, the study intends to highlight the limits, nuances and consequences of the binding effect. It mentions the contribution of the national courts and of the Court of Justice of the European Union to the development of EU law, such as clarifying autonomous notions and it emphasizes the preliminary procedure's attributes of being a form of judicial protection of individual rights, as well as a means to review the legality of acts of EU institutions. The paper is meant to be a useful instrument for practitioners. Therefor, it also deals with the possibility and limits of asking new questions, in order to obtain reconsideration or a refinement of the legal issue and with the problem of judicial control over the interpretation and application of the preliminary ruling by the lower court.

  7. 以提高临床实践能力为导向的出科OSCE实施探索%Preliminary exploration of OSCE-test on completion of a course to improve students' clinical competence

    Institute of Scientific and Technical Information of China (English)

    周金懿; 丁美琴; 徐文; 丁晓林; 孙书方; 陈卫昌

    2013-01-01

    目的:探索实习过程中提高医学生临床实践能力的有效途径。方法选取苏州大学2006级与2007级临床医学专业398名学生为研究对象,将分配至附属第一医院40人作为实验组,分配至其他实习医院的358人为对照组。实验组通过在常规实习管理过程中引入出科客观结构化临床考核(objective structured clinical examination,OSCE),引导学生开展自主学习、强化临床实践。对照组采用传统实习和考核方法。应用SPSS 19.0软件包对学生操作考试成绩进行统计分析,采用配对样本t检验和独立样本t检验,计量资料以均分±标准差(x±s)表示,P<0.05为差异有统计学意义。结果实验组40名学生实习前后的临床实践能力均有不同程度的提高,其中心电图判读、心肺听诊、问诊技巧、内科操作和外科操作成绩提高明显(P<0.05);实验组在毕业临床实践能力评估中的综合能力表现明显优于对照组总体水平(P<0.05)。结论合理应用出科OSCE,使实习管理更有效,学生实习目的更明确,可有效促进和提高学生的临床实践能力。%Objective To investigate the effective ways of improving medical students' clinical competence during the process of internship. Methods Totally 398 students of clinical medicine from 2006 and 2007 grade in Soochow University were enrolled as research objects. Forty objects distribut-ed to the First Affiliated Hospital were taken as experiment group while 358 objects distributed to other hospital as control group. In experiment group, objective structured clinical examination (OSCE) was introduced during regular internship, innovation was made on test on completion of a course and autonomous learning and clinical practice was advocated and enhanced. Traditional practice and ex-amination method was used in control group. SPSS 19.0 was used to do statistical analysis on the test scores of students. Paired

  8. Preliminary Hazards Analysis Plasma Hearth Process

    Energy Technology Data Exchange (ETDEWEB)

    Aycock, M.; Coordes, D.; Russell, J.; TenBrook, W.; Yimbo, P. [Science Applications International Corp., Pleasanton, CA (United States)

    1993-11-01

    This Preliminary Hazards Analysis (PHA) for the Plasma Hearth Process (PHP) follows the requirements of United States Department of Energy (DOE) Order 5480.23 (DOE, 1992a), DOE Order 5480.21 (DOE, 1991d), DOE Order 5480.22 (DOE, 1992c), DOE Order 5481.1B (DOE, 1986), and the guidance provided in DOE Standards DOE-STD-1027-92 (DOE, 1992b). Consideration is given to ft proposed regulations published as 10 CFR 830 (DOE, 1993) and DOE Safety Guide SG 830.110 (DOE, 1992b). The purpose of performing a PRA is to establish an initial hazard categorization for a DOE nuclear facility and to identify those processes and structures which may have an impact on or be important to safety. The PHA is typically performed during and provides input to project conceptual design. The PRA then is followed by a Preliminary Safety Analysis Report (PSAR) performed during Title I and II design. This PSAR then leads to performance of the Final Safety Analysis Report performed during construction, testing, and acceptance and completed before routine operation. Radiological assessments indicate that a PHP facility, depending on the radioactive material inventory, may be an exempt, Category 3, or Category 2 facility. The calculated impacts would result in no significant impact to offsite personnel or the environment. Hazardous material assessments indicate that a PHP facility will be a Low Hazard facility having no significant impacts either onsite or offsite to personnel and the environment.

  9. Preliminary results of ground-motion characteristics

    Directory of Open Access Journals (Sweden)

    Francesca Bozzoni

    2012-10-01

    Full Text Available The preliminary results are presented herein for the engineering applications of the characteristics of the ground motion induced by the May 20, 2012, Emilia earthquake. Shake maps are computed to provide estimates of the spatial distribution of the induced ground motion. The signals recorded at the Mirandola (MRN station, the closest to the epicenter, have been processed to obtain acceleration, velocity and displacement response spectra. Ground-motion parameters from the MRN recordings are compared with the corresponding estimates from recent ground-motion prediction equations, and with the spectra prescribed by the current Italian Building Code for different return periods. The records from the MRN station are used to plot the particle orbit (hodogram described by the waveform. The availability of results from geotechnical field tests that were performed at a few sites in the Municipality of Mirandola prior to this earthquake of May 2012 has allowed preliminary assessment of the ground response. The amplification effects at Mirandola are estimated using fully stochastic site-response analyses. The seismic input comprises seven actual records that are compatible with the Italian code-based spectrum that refers to a 475-year return period. The computed acceleration response spectrum and the associated dispersion are compared to the spectra calculated from the recordings of the MRN station. Good agreement is obtained for periods up to 1 s, especially for the peak ground acceleration. For the other periods, the spectral acceleration of the MRN recordings exceeds that of the computed spectra.

  10. 45 CFR 150.217 - Preliminary determination.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 1 2010-10-01 2010-10-01 false Preliminary determination. 150.217 Section 150.217... Are Failing To Substantially Enforce HIPAA Requirements § 150.217 Preliminary determination. If, at... designees). (b) Notifies the State of CMS's preliminary determination that the State has failed to...

  11. BACTEC MGIT960系统在分枝杆菌属菌种初步鉴定及药敏中的应用%Application of BACTEC MGIT 960 system in preliminary identification of mycobacterium and antimicrobial susceptibility test

    Institute of Scientific and Technical Information of China (English)

    孙美兰; 陈晓; 华永川

    2011-01-01

    目的 评价BACTEC MGIT 960系统在分枝杆菌属菌种鉴定及药敏中的应用价值.方法 显微镜观察BACTEC MGIT 960系统分离的162株分枝杆菌在液体培养基中的形态,传统生化和核酸检测法同时鉴定分枝杆菌属菌种,分析细菌形态与菌种之间的关系;应用BACTEC MGIT 960系统对分离的141株结核分枝杆菌进行药敏试验.结果 162株分枝杆菌属在MGIT液体培养基中呈索条状、分枝状、点粒状和分散状4种形态;呈索条状132株分枝杆菌属均为结核分枝杆菌,呈点粒状10株和分散状6株分枝杆菌属均为非结核分枝杆菌;对链霉素、异烟肼、利福平和乙胺丁醇的耐药率分别为9.9%、14.2%、9.2%和6.4%,总耐药率18.4%,同时耐利福平和异烟肼的为8.5%;药敏平均检测时间为9.3 d.结论 BACTEC MGIT960系统可快速将分枝杆菌属初步鉴定为结核分枝杆菌和非结核分枝杆菌,能快速准确获得临床一线抗结核药物的药敏结果.%OBJECTIVE To evaluate the application of BACTEC MGIT 960 system in mycobacterium identification and antimicrobial susceptibility test. METHODS The growth forms of 162 strains in liquid media were observed with microscope. Mycobacterium strains were identified by real-time PCR and traditional biochemistry method.The relation between bacteria form and strain categarly was analyzed. The susceptibility testing of Mycobacterium tuberculosis of 4 major antituberculosis drugs were detected with BACTEC MGIT 960 system. RESULTS Four growth forms of cording, clump and branch, load and scatter, and coccoid form were observed from 162 strains in liquid media. Among these, 132 strains of cording form were all M. tuberculosis, 10 strains of coccoid and 6 strains of load and scatter form were all nontuberculosis mycobacteria. Of the 141 strains mycobacterium tuberculosis complex, the rate of multi-drug resistance (MDR)-TB was 8. 5%, the drug resistance rate of streptomycin, isoniazid, rifampicin and

  12. Deployment of a Pressure Sensitive Paint System for Measuring Global Surface Pressures on Rotorcraft Blades in Simulated Forward Flight: Preliminary PSP Results from Test 581 in the 14- by 22-Foot Subsonic Tunnel

    Science.gov (United States)

    Watkins, Anthony Neal; Leighty, Bradley D.; Lipford, William E.; Wong, Oliver D.; Goodman, Kyle Z.; Crafton, James; Forlines, Alan; Goss, Larry; Gregory, James W.; Juliano, Thomas J.

    2011-01-01

    This report will present details of a Pressure Sensitive Paint (PSP) system for measuring global surface pressures on the tips of rotorcraft blades in simulated forward flight at the 14- x 22-Foot Subsonic Tunnel. The system was designed to use a pulsed laser as an excitation source and PSP data was collected using the lifetime-based approach. With the higher intensity of the laser, this allowed PSP images to be acquired during a single laser pulse, resulting in the collection of crisp images that can be used to determine blade pressure at a specific instant in time. This is extremely important in rotorcraft applications as the blades experience dramatically different flow fields depending on their position in the rotor disk. Testing of the system was performed using the U.S. Army General Rotor Model System equipped with four identical blades. Two of the blades were instrumented with pressure transducers to allow for comparison of the results obtained from the PSP. This report will also detail possible improvements to the system.

  13. 整合视听连续执行测试与智商关系初探%Preliminary discussion of the relationship between integrated visual and auditory continuous performance test and intelligence quotient

    Institute of Scientific and Technical Information of China (English)

    冯冰; 杨良政; 周海鹰; 陈红

    2011-01-01

    目的:探讨整合视听连续执行测试各商数与智商间关系,寻找IVA - CPT测试的辅助诊断价值.方法:将IVA-CPT测试各商数与智商做直线相关分析.结果:智商与综合注意商数、反应控制商数、理解商数、视觉感觉统合商数呈正相关;ADHD注意缺陷型的智商较低.结论:IVA - CPT测试各商数与智商密切相关,ADHD注意缺陷型对智力影响较大.%Objective; To explore the relationship between integrated visual and auditory continuous performance test (IVA-CPT) and intelligence quotient, find out the value of IVA-CPT for assisted diagnosis. Methods; A linear correlation analysis was conduc-ted on the quotients of IVA - CPT and intelligence quotient. Results; There was a positive correlation between intelligence quotient and com-prehensive attention quotient, response control quotient, understanding quotient, visual sensory integration quotient; the intelligence quo-tients of children with attention deficit hyperactivity disorder (ADHD) of attention deficit type were relatively. Conclusion; The quotients of IVA - CPT are related to intelligence quotient closely, the impact of ADHD of attention deficit type on intelligence quotient is large.

  14. 颞叶癫痫发作后患者语言评估的初步研究%Postictal language testing in patients with temporal lobe epilepsy: a preliminary study

    Institute of Scientific and Technical Information of China (English)

    俞群; 王钟瑾; 王爽; 朱君明; 丁美萍

    2014-01-01

    目的 评估癫痫发作后的患者语言功能障碍能提供有价值的诊断信息,但目前还无基于汉语的研究.我们观察了颞叶癫痫发作后患者语言功能恢复的潜伏期与致痫灶定侧的关系.方法 选择视频脑电数据库中记录到的起源于颞叶的复杂部分性癫痫发作,所有患者在发作后立即接受意识评估,当患者能配合测试者后,给予患者印有“昨晚他们听到老李在电台里讲话”的卡片进行阅读,将患者连续朗读出语句的时刻标记为语言恢复时刻.结果 纳入左侧和右侧颞叶癫痫各11例,复杂部分性发作共65次,其中54次(83.1%)发作中患者能够配合语言功能评价.癫痫发作后患者的意识和语言恢复潜伏期与癫痫持续时间无关联,但受到致痫灶侧别的影响,左侧颞叶癫痫组的意识恢复潜伏期(161 s)和语言恢复期(281 s)均显著长于右侧颞叶癫痫组(中值分别为30 s,54 s).以150 s的恢复时间为界,右侧颞叶癫痫组发作后恢复比例为87% (27/31),而左侧颞叶癫痫组恢复比例为13% (3/23).结论 发作后的患者汉语功能评估能帮助颞叶癫痫发作的定侧.%Objective Postictal language testing can provide useful diagnostic information for seizure lateralization.However no such a study based on non-English language was done previously.We investigated the latency of language recovery in Chinese patients with temporal lobe epilepsy (TLE).Methods Complex partial seizures in patients with TLE were extracted from our video-electroencephalogram (EEG) database.For all patients,consciousness testing started as soon as seizures were detected.When they were alert and cooperative,they were asked to read out a sentence “昨晚他们听到老在电台里讲话”which was printed on a card.When the patients were able to read the sentence correctly,the language function was considered recovered.Results Totally 65 complex partial seizures from 22 cases of TLE (11 left and

  15. Short-term monitoring of benzene air concentration in an urban area: a preliminary study of application of Kruskal-Wallis non-parametric test to assess pollutant impact on global environment and indoor.

    Science.gov (United States)

    Mura, Maria Chiara; De Felice, Marco; Morlino, Roberta; Fuselli, Sergio

    2010-01-01

    In step with the need to develop statistical procedures to manage small-size environmental samples, in this work we have used concentration values of benzene (C6H6), concurrently detected by seven outdoor and indoor monitoring stations over 12 000 minutes, in order to assess the representativeness of collected data and the impact of the pollutant on indoor environment. Clearly, the former issue is strictly connected to sampling-site geometry, which proves critical to correctly retrieving information from analysis of pollutants of sanitary interest. Therefore, according to current criteria for network-planning, single stations have been interpreted as nodes of a set of adjoining triangles; then, a) node pairs have been taken into account in order to estimate pollutant stationarity on triangle sides, as well as b) node triplets, to statistically associate data from air-monitoring with the corresponding territory area, and c) node sextuplets, to assess the impact probability of the outdoor pollutant on indoor environment for each area. Distributions from the various node combinations are all non-Gaussian, in the consequently, Kruskal-Wallis (KW) non-parametric statistics has been exploited to test variability on continuous density function from each pair, triplet and sextuplet. Results from the above-mentioned statistical analysis have shown randomness of site selection, which has not allowed a reliable generalization of monitoring data to the entire selected territory, except for a single "forced" case (70%); most important, they suggest a possible procedure to optimize network design.

  16. Short-term monitoring of benzene air concentration in an urban area: a preliminary study of application of Kruskal-Wallis non-parametric test to assess pollutant impact on global environment and indoor

    Directory of Open Access Journals (Sweden)

    Maria Chiara Mura

    2010-12-01

    Full Text Available In step with the need to develop statistical procedures to manage small-size environmental samples, in this work we have used concentration values of benzene (C6H6, concurrently detected by seven outdoor and indoor monitoring stations over 12 000 minutes, in order to assess the representativeness of collected data and the impact of the pollutant on indoor environment. Clearly, the former issue is strictly connected to sampling-site geometry, which proves critical to correctly retrieving information from analysis of pollutants of sanitary interest. Therefore, according to current criteria for network-planning, single stations have been interpreted as nodes of a set of adjoining triangles; then, a node pairs have been taken into account in order to estimate pollutant stationarity on triangle sides, as well as b node triplets, to statistically associate data from air-monitoring with the corresponding territory area, and c node sextuplets, to assess the impact probability of the outdoor pollutant on indoor environment for each area. Distributions from the various node combinations are all non-Gaussian, in the consequently, Kruskal-Wallis (KW non-parametric statistics has been exploited to test variability on continuous density function from each pair, triplet and sextuplet. Results from the above-mentioned statistical analysis have shown randomness of site selection, which has not allowed a reliable generalization of monitoring data to the entire selected territory, except for a single "forced" case (70%; most important, they suggest a possible procedure to optimize network design.

  17. Proposal of the Implementation of an International Pharmacy Graduate Preliminary Examination

    Directory of Open Access Journals (Sweden)

    Kyenghee Kwon

    2008-12-01

    Full Text Available At present, graduates of international pharmacy schools can apply to take the Korean Pharmacist Licensing Examination after passing a review by the Accreditation Board of the Pharmacy Schools and Licenses. However, since the educational content of different schools and the roles of pharmacists differ from country to country, a preliminary examination might be necessary before the Pharmacist Licensing Examination. To prepare to implement a preliminary examination for foreign pharmacy graduates in Korea, we summarized the preliminary examinations used in four other countries and presented a proposal for a preliminary examination. Data were collected via the internet and through telephone interviews with appropriate persons. The proposal was revised after a public forum. There are preliminary examinations in the USA, Canada, Australia, and the United Kingdom, and these involve written, oral, practice, and English proficiency tests. We proposed that the Korean preliminary examination consist of a written test on basic pharmacy, a test in the Korean language, and an interview. The preliminary examination should include suitable items that effectively evaluate international graduates. Graduates of international pharmacy schools who have an ability equivalent to graduates of Korean pharmacy schools should be eligible to write the Korean Licensing Examination.

  18. 99mTc-IgG-Lung Scintigraphy in the Assessment of Pulmonary Involvement in Interstitial Lung Disease and Its Comparison With Pulmonary Function Tests and High-Resolution Computed Tomography: A Preliminary Study

    Directory of Open Access Journals (Sweden)

    Bahtouee

    2015-08-01

    Full Text Available Background The discrimination of inactive inflammatory processes from the active form of the disease is of great importance in the management of interstitial lung disease (ILD. Objectives The aim of this study was to determine the efficacy of 99mTc-IgG scan for the detection of severity of disease compared to high-resolution computed tomography (HRCT and pulmonary function test (PFT. Patients and Methods Eight known cases of ILD including four cases of Mustard gas (MG intoxication and four patients with ILD of unknown cause were included in this study. A population of six patients without lung disease was considered as the control group. The patients underwent PFT and high-resolution computed tomography, followed by 99mTc-IgG scan. They were followed up for one year. 99mTc-IgG scan assessment of IgG uptake was accomplished both qualitatively (subjectively and semiquantitatively. Results All eight ILD patients demonstrated a strong increase in 99mTc-IgG uptake in the lungs, compared to the control patients. The 99mTc-IgG scan scores were higher in the patient group (0.64[95% confidence interval(CI=0.61-0.69] than the control group (0.35 (0.35[95% CI=0.28-0.40], (P 0.05. There were no significant correlations between 99mTc-IgG score and HRCT patterns including ground glass opacity, reticular fibrosis and honeycombing (P value > 0.05. Conclusion The present results confirmed that 99mTc-IgG scan could be applied to detect the severity of pulmonary involvement, which was well correlated with HRCT findings. This data also showed that the 99mTc-IgG scan might be used as a complement to HRCT in the functional evaluation of the clinical status in ILD; however, further studies are recommended.

  19. Ensaios preliminares em laboratório para verificar a ação moluscicida de algumas espécies da flora brasileira Preliminary laboratory tests of the molluscicide activity of some species of Brazilian flora

    Directory of Open Access Journals (Sweden)

    Nelymar Martineli Mendes

    1984-10-01

    Full Text Available Estudou-se em laboratório a atividade moluscicida de 68 extratos de 23 plantas brasileiras. As soluções em água desclorada dos extratos hexânicos e etanólico, nas concentrações de 1, 10 e 100 ppm, foram testadas sobre caramujos adultos e desovas de Biomphalaria glabrata, criados em laboratório. As plantas que demonstraram ação moluscicida na concentração de 100 ppm foram: Arthemisia verlotorum Lamotte, Caesalpinia peltophoroides Benth, Cassia rugosa G.Don., Eclipta alba Hassk, Euphorbia pulcherrima Willd, Euphorbia splendens Bojer, Joannesia princeps Vell, Leonorus sibiricus L.,Macrosiphonia guaranitica Muell,Nerium oleander L., Palicourea nicotianaefolia Cham, e Schlech., Panicum maximum M., Rumex crispus L., Ruta graveolens L., e Stryphnodendron barbatiman M.The molluscicide activity of sixty-eight extracts from twenty-three Brazilian plants was studied in the laboratory. The solutions, in dechlorinated water, of hexanic and ethylic extracts at 1, 10 and 100 ppm concentrations, were tested on adult snails and egg masses of Biomphalaria glabrata, reared in the laboratory. The plants with molluscicide activity on adult snails and/or egg masses at 100 ppm concentration were: Arthemisia verlotorum Lamotte, Caesalpinia peltophoroides Benth, Cassia rugosa G. Don, Eclipta alba Hassk, Euphorbia pulcherrima Willd, Euphorbia splendens Bojer, Joannesia princeps Vell, Leonorus sibiricus L., Macrosiphonia guaranitica Muell, Nerium oleander L., Palicourea nicotianaefolia Cham. and Schlech., Panicum maximum M., Rumex crispus L., Ruta graveolens L. and Stryphnodendron barbatiman M.

  20. 99mTc-MIBI Lung Scintigraphy in the Assessment of Pulmonary Involvement in Interstitial Lung Disease and Its Comparison With Pulmonary Function Tests and High-Resolution Computed Tomography: A Preliminary Study.

    Science.gov (United States)

    Bahtouee, Mehrzad; Saberifard, Jamshid; Javadi, Hamid; Nabipour, Iraj; Raeisi, Alireza; Assadi, Majid; Eftekhari, Mohammad

    2015-11-01

    The differentiation of active inflammatory processes from an inactive form of the disease is of great value in the management of interstitial lung disease (ILD). The aim of this investigation was to assess the efficacy of 99mTc-methoxy-isobutyl-isonitrile (99mTc-MIBI) scans in distinguishing the severity of the disease compared to radiological and clinical parameters.In total, 19 known cases of ILD were included in this study and were followed up for 1 year. Five patients without lung disease were considered as the control group. The patients underwent pulmonary function tests (PFTs) and high-resolution computed tomography scans, followed by 99mTc-MIBI scanning. The 99mTc-MIBI scans were analyzed either qualitatively (subjectively) or semiquantitatively.All 19 ILD patients demonstrated a strong increase in 99mTc-MIBI uptake in the lungs compared to the control group. The 99mTc-MIBI scan scores were higher in the patient group in both the early phase (0.24[0.19-0.31] vs 0.11[0.10-0.15], P 0.14). The 99mTc-MIBI scan scores were not significantly correlated with the PFT findings (P > 0.05). In total, 5 patients died and 14 patients were still alive over the 1-year follow-up period. There was also a significant difference between the uptake intensity of 99mTc-MIBI and the outcome in the early phase (dead: 0.32[0.29-0.43] vs alive: 0.21[0.18-0.24], P pulmonary involvement in early views, which were well correlated with HRCT findings. These results also revealed that 99mTc-MIBI lung scans might be used as a complement to other diagnostic and clinical examinations in terms of functional information in ILD; however, further investigations are strongly required.

  1. Potential long-term chemical effects of diesel fuel emissions on a mining environment: A preliminary assessment based on data from a deep subsurface tunnel at Rainer Mesa, Nevada test site

    Energy Technology Data Exchange (ETDEWEB)

    Meike, A.; Bourcier, W.L.; Alai, M. [and others

    1995-09-01

    The general purpose of the Yucca Mountain Site Characterization Project (YMSCP) Introduced Materials Task is to understand and predict potential long-term modifications of natural water chemistry related to the construction and operation of a radioactive waste repository that may significantly affect performance of the waste packages. The present study focuses on diesel exhaust. Although chemical information on diesel exhaust exists in the literature, it is either not explicit or incomplete, and none of it establishes mechanisms that might be used to predict long-term behavior. In addition, the data regarding microbially mediated chemical reactions are not well correlated with the abiotic chemical data. To obtain some of the required long-term information, we chose a historical analog: the U12n tunnel at Rainier Mesa, Nevada Test Site. This choice was based on the tunnel`s extended (30-year) history of diesel usage, its geological similarity to Yucca Mountain, and its availability. The sample site within the tunnel was chosen based on visual inspection and on information gathered from miners who were present during tunnel operations. The thick layer of dark deposit at that site was assumed to consist primarily of rock powder and diesel exhaust. Surface samples and core samples were collected with an intent to analyze the deposit and to measure potential migration of chemical components into the rock. X-ray diffraction (XRD), x-ray fluorescence (XRF), scanning electron microscopy (SEM) with energy dispersive spectra (EDS) analysis, secondary-ion mass spectrometry (SIMS), and Fourier transform infrared (FTIR) analysis were used to measure both spatial distribution and concentration for the wide variety of chemical components that were expected based on our literature survey.

  2. Stratigraphic and structural data for the Conasauga Group and the Rome Formation on the Copper Creek fault block near Oak Ridge, Tennessee: preliminary results from test borehole ORNL-JOY No. 2

    Energy Technology Data Exchange (ETDEWEB)

    Haase, C.S.; Walls, E.C.; Farmer, C.D.

    1985-06-01

    To resolve long-standing problems with the stratigraphy of the Conasauga Group and the Rome Formation on the Copper Creek fault block near Oak Ridge National Laboratory (ORNL), an 828.5-m-deep test borehole was drilled. Continuous rock core was recovered from the 17.7- to 828.5-m-deep interval; temperature, caliper, neutron, gamma-ray, and acoustic (velocity and televiewer) logs were obtained. The Conasauga Group at the study site is 572.4 m thick and comprises six formations that are - in descending stratigraphic order - Maynardville Limestone (98.8 m), Nolichucky Shale (167.9 m), Maryville Limestone (141.1 m), Rogersville Shale (39.6 m), Rutledge Limestone (30.8 m), and Pumpkin Valley Shale (94.2 m). The formations are lithologically complex, ranging from clastics that consist of shales, mudstones, and siltstones to carbonates that consist of micrites, wackestones, packstones, and conglomerates. The Rome Formation is 188.1 m thick and consists of variably bedded mudstones, siltstones, and sandstones. The Rome Formation thickness represents 88.1 m of relatively undeformed section and 100.0 m of highly deformed, jumbled, and partially repeated section. The bottom of the Rome Formation is marked by a tectonic disconformity that occurs within a 46-m-thick, intensely deformed interval caused by motion along the Copper Creek fault. Results from this study establish the stratigraphy and the lithology of the Conasauga Group and the Rome Formation near ORNL and, for the first time, allow for the unambiguous correlation of cores and geophysical logs from boreholes elsewhere in the ORNL vicinity. 45 refs., 26 figs., 2 tabs.

  3. Preliminary Report on Introduction Test of Different Aromatic Plants in Shenyang Area%30种芳香植物在沈阳地区引种试验初报

    Institute of Scientific and Technical Information of China (English)

    李晓明; 冯辉

    2014-01-01

    In order to select the aromatic plants suitable for cultivation in Shenyang area,30 aromatic plants species or varieties collected at home and abroad were introduced as test materials.All of them were planted both in the field in summer and the green house in winter.Evaluations were made on their seed germination time,transplanting survival rate of seedlings,growth potential,flowering,aroma characteristics and stress tol-erance.The results showed that 17 species,including arugula,sweet basil,purple basil,pink calyx sage, spearmint,catnip,bee balm,mint (Monarda citriodora),mint (Mentha arvensis),dracocephalum,wrinkled gianthyssop,common perilla,borage,golden camomile,chamomile,dill and evening primrose,were suitable for open field cultivation in Shenyang area.Most species were evaluated for spice,ornamental and vegetable according to their growth potential,respectively.%以从国内外引进的30种芳香植物为试验材料,从种子出苗时间、移栽成活率、生长势、开花情况、香气特点和抗逆性等因素着手,对各种类进行综合评价,旨在通过引种试验初步筛选出适于沈阳地区栽培的芳香植物。结果表明,芝麻菜、罗勒、紫罗勒、粉萼鼠尾草、留兰香、猫薄荷、美国薄荷、马薄荷、薄荷、香青兰、藿香、紫苏、琉璃苣、春黄菊、洋甘菊、莳萝和月见草17个种类生长势强,适宜在沈阳地区露地栽培;根据夏季露地和冬季温室中的生长情况,从香料生产、观赏、菜用等不同角度对其进行了评价。

  4. Preliminary Study of Calcified Roasting Vanadium Slag Leaching Toxicity Test%钙化焙烧提钒废渣浸出毒性试验初步研究

    Institute of Scientific and Technical Information of China (English)

    杨爱江; 王其; 卢莎莎

    2013-01-01

    对贵州省某矿业有限公司刚出炉的钙化焙烧提钒废渣进行浸出实验,并利用斑马鱼胚胎染毒实验探讨了钙化焙烧提钒废渣浸出液中重金属的联合毒性效应.实验结果表明:根据《固体废物浸出毒性浸出方法-水平振荡法》(HJ557-2010)试验规范进行浸出,钙化焙烧提钒废渣浸出液中V浓度符合《钒工业污染物排放标准》(GB26452-2011),其它7种重金属浓度均符合《污水综合排放标准》(GB8978-1996)中的排放限值;染毒后的斑马鱼胚胎没有表现出强烈的感应,孵化出的幼鱼表现正常.由此说明钙化焙烧提钒废渣浸出液毒性较小,不会表现出对环境的强烈污染效应.%Leaching experiment on oven-fresh vanadium slag extracted by calcified roasting from Guizhou Province was conducted,and the joint toxic effects of heavy metals was discussed by using Zebra fish embryos infected experiment in lixivium from vanadium slag extracted by calcified roasting.The results show that vanadium concentrations are consistent with discharge standard of pollutants for vanadium industry (GB26452-2011),leaching under solid waste-extraction procedure for leaching toxicity-horizontal vibration method (HJ557-2010)test specification,the other seven kinds of heavy metals concentration in line with the emission limits of integrated wastewater discharge standard (GB8978-1996) ; the infected Zebra fish embryos did not show a strong induction,and the hatched juvenile fish appeared normal.It shows the small toxicity of lixivium from vanadium slag extracted by calcified roasting,not exhibiting strong pollution effects on the environment.

  5. A NEW RESISTANCE RESOURCE OF WHEAT YELLOW RUST AND ITS SPECTRUM PRELIMINARY TEST FOR RESISTANCE%小麦条锈病新抗源的抗谱鉴定初析

    Institute of Scientific and Technical Information of China (English)

    陈佩度; 刘正德; 黄光明; 蒋滨; 刘大钧; 齐莉莉; 周波; 张守忠; 盛宝钦; 段霞瑜; 王保通; 金欣藻

    2001-01-01

    A set of common wheat (Triticum aestivum) alien addition and substitution lines involving different Haynaldia villosa chromosomes and five 6VS/6AL translocation lines deve loped by Institute of Cytogenetics, Nanjing Agricultural University, were identified for wheat yellow rust resistance. The resistance test was made by inoculating new races of Puccinia stri iformis for three successive years, 1997, 1998 and 1999 in Shaanxi, Beijing and Sichuan. The results indicated that Triticum aestivum-Haynaldia villosa alien addition line 6V, substitution lines 6V (6A) and translocation lines 6VS/6AL were high resistant to new races: CY29,CY31, Hybrid Ⅲ, Shuiyuan 11-2, Shuiyuan 11-5 and Shuiyuan 11-13 with strong virulence.The resistance of Triticum durum-Haynaldia villosa amphiploid involving all 7 chromosomes of V genome excluded the race Shuiyuan 11-13. This might mean that the yellow rust resistance in the T. aestivum-Haynaldia villosa addition line 6V, substitution lines 6V (6A) and transloca tion lines 6VS/6AL probably related with gene actions of different sources including wheat parents involved.%利用南京农业大学细胞遗传研究所育成的一套涉及不同簇毛麦染色体的异附加系和代换系以及5个6VS/6AL易位系,经1997、1998、1999连续3年在陕西、北京、四川进行小麦条锈病抗性接种鉴定,结果表明普通小麦-簇毛麦6V异附加系,6V(6A)异代换系和6VS/6AL易位系高抗条锈病菌条中29、条中3l、水源11-2、水源11-5、水源11-13和杂46Ⅱ等强毒小种。考虑到含整组V染色体的硬粒小麦-簇毛麦双倍体不抗水源11-13小种,上述普通小麦-簇毛麦6V异附加系、异代换系和6VS/6AL易位系的条锈病抗性可能还与其所涉及的小麦亲本基因的作用有关。

  6. CTF3 Design Report Preliminary Phase

    CERN Document Server

    Allard, D; Bernard, M; Bertuzzi, J P; Bienvenu, G; Bonzano, R; Bossart, Rudolf; Braun, H; Bravin, Enrico; Borburgh, J; Buttkus, J; Chazarenc, E; Chaput, R; Chohan, V; Cloye, J J; Corsini, R; Coudert, G; Damiani, M; Deghaye, S; Delahaye, J P; Di Maio, F; Dobers, T; Dubief, P; Dupuy, B; Durieu, L; Ferrari, A; Garvey, Terence; Geschonke, Günther; Hansen, J; Hellgren, H; Hourican, M; Lamidon, M; Le Duff, J; Lefèvre, T; Lewis, J H; Lindroos, J; Mahner, E; McMonagle, G; Monteiro, J; Mourier, J; Mouton, B; Odier, P; Otto, T; Pearce, P; Pittin, R; Poehler, M; Potier, J P; Raich, U; Rettig, M; Rinolfi, Louis; Risselada, Thys; Riva, R; Rossat, G; Royer, P; Sermeus, L; Setas, K; Simonet, G; Sladen, Jonathan P H; Søby, L; Tanner, L; Tecker, F A; Thomi, J C; Wilson, Ian H; Yvon, G

    2001-01-01

    The design of CLIC is based on a two-beam scheme, where the short pulses of high power 30 GHz RF are extracted from a drive beam running parallel to the main beam. The 3rd generation CLIC Test Facility (CTF3) will demonstrate the generation of the drive beam with the appropriate time structure, the extraction of 30 GHz RF power from this beam, as well as acceleration of a probe beam with 30 GHz RF cavities. The project makes maximum use of existing equipment and infrastructure of the LPI complex, which became available after the closure of LEP. In the first stage of the project, the "Preliminary Phase", the existing LIL linac and the EPA ring, both modified to suit the new requirements, are used to investigate the technique of frequency multiplication by means of interleaving bunches from subsequent trains. This report describes the design of this phase.

  7. 9个西瓜新品种在兰州的引种试验初报%A preliminary Report on Introduction Test of 9 New Watermelon Varieties in Lanzhou

    Institute of Scientific and Technical Information of China (English)

    张化生; 杨永岗; 苏永全; 李晓芳

    2014-01-01

    In order to select suitable Lanzhou area cultivated watermelon varieties,the introduction of the three large fruit varieties and six small watermelon fruit watermelon varieties Variety. The results showed that large watermelon fruit good performance Longkang 11 and Black Beauty . The Longkang 11 average fruit weight 5.32 kg,sugar content of 11.5%,good flavor,good storage, the average yield of 79 857.14 kg/hm2 . Black Beauty the average fruit weight 4.87 kg,the sugar content of 11.8%,good flavor, good crack resistance,very good storage,the average yield of 73 071.43 kg/hm2. Small Watermelon good performance Jinglei and Longfengzaoxin . The Jinglei average fruit weight 4.32 kg, sugar content of 12.3%, good flavor, representing storage and transportation,equivalent yield 64 857.14 kg/hm2. The Longfengzaoxin average fruit weight 3.65 kg,the sugar content of 10.5%, crisp and refreshing,crack,very good storage,equivalent yield of 60 785.71 kg/hm2 . The performance of the tested varieties and integrated regional market demand Lanzhou believe that the large fruit watermelon varieties Longkang 11,Black Beauty Jinglei and Longfengzaoxin suitable Lanzhou areas cultivated .%为了筛选适合兰州地区栽培的西瓜新品种,对引进的3个中大果型西瓜品种和6个小果型西瓜品种进行品种比较试验,结果表明,中大果型西瓜表现好的有陇抗11号、大果黑美人,其中陇抗11号属中晚熟品种,平均单瓜重5.32 kg,中糖含量为11.5%,风味好,贮运性好,平均产量达79857.14 kg/hm2,较对照品种陇抗9号、丰抗8号分别增产2.76%、8.97%。大果黑美人熟性较早,平均单瓜重4.87 kg,中糖含量为11.8%,风味好,抗裂性好,极耐贮运,平均产量达73071.43 kg/hm2,较对照品种陇抗9号、丰抗8号分别减产5.97%、0.29%。小果型西瓜表现好的有金雷、陇丰早欣,其中金雷平均单瓜重4.32 kg,中糖含量为12.3%,风味佳

  8. Developing test materials for dyscalculia

    DEFF Research Database (Denmark)

    Lindenskov, Lena; Bent, Lindhardt,

    Aims, requirements and context for the development of test materials for dyscalculia are analyzed. The test materials are to be used for Grade 4 pupils in Danish primary schools. Preliminary results are presented from focus group interview with adolescents and adults, who see themselves as being...

  9. Escherichia coli O26 IN RAW BUFFALO MILK: PRELIMINARY RESULTS

    Directory of Open Access Journals (Sweden)

    A. Rella

    2013-02-01

    Full Text Available Escherichia coli O26 is considered to be one of the most important food-borne pathogen. In this study, 120 buffalo milk samples collected in Lazio and in Apulia regions were tested for the presence of E. coli O26. One buffalo milk sample (0,8% tested positive for E. coli O26; the isolate was positive at the verocytotoxicity test and it showed resistance properties to different antimicrobial classes. These preliminary results highlight the need to monitor the foods of animal origin used for production and eaten by a wide range of persons, respect VTEC organism.

  10. Advanced stellar compass - Onboard autonomous orbit determination, preliminary performance

    DEFF Research Database (Denmark)

    Betto, Maurizio; Jørgensen, John Leif; Jørgensen, Peter Siegbjørn

    2004-01-01

    of this instrument, the authors have devised a method to determine the orbit of a spacecraft autonomously, onboard, and without a priori knowledge of any kind. The solution is robust and fast. This paper presents the preliminary performance obtained during the ground testing in August 2002 at the Mauna Kea...... be implemented into an ASC without degrading the attitude measurements; and (4) to identify the areas of development and consolidation. The results obtained are very encouraging....

  11. Aphallia (Penile agenesis: A preliminary report of three cases

    Directory of Open Access Journals (Sweden)

    Prashant Sadashiv Patil

    2017-01-01

    Full Text Available Aphallia (penile agenesis is an extremely rare abnormality with the reported incidence of 1 in 30 million births. The cause of this anomaly is associated with no genital tubercle formation or its development impairment. The majority of patients have 46XY Karyotype. The scrotum, testes and testicular function are usually normal. We report the preliminary experience with 3 cases of aphallia in different age groups along with a review of the literature.

  12. Preliminary Clinical Evaluation: The What, Where, How Approach to Scoring

    OpenAIRE

    Wright, C.; Akimoto, T.

    2016-01-01

    The SCoR is driving for preliminary clinical evaluation (PCE) however; currently there is no method of quantification to assess quality. FRCR has an approach to quantify comments in the rapid reporting examination (CR2B).The aim of this project was to develop a robust scoring system that enables comprehensive image evaluation regardless of profession. An image test bank was administered using RadBench with equal prevalence of normal /abnormal. A random sample of attempts was selected to pilot...

  13. Preliminary results of the echo-seeding experiment at SLAC

    Energy Technology Data Exchange (ETDEWEB)

    Xiang, D.; Colby, E.; Ding, Y.; Dunning, M.; Frederico, J.; Gilevich, S.; Hast, C.; Jobe, K.; McCormick, D.; Nelson, J.; Raubenheimer, T.O.; Soong, K.; Stupakov, G.; Szalata, Z.; Walz, D.; Weathersby, S.; Woodley, M.; Corlett, J.; Qiang, J.; Penn, G.; Prestemon, S.; Schlueter, R.; Venturini, M.; Wan, W.; Pernet, P-L.

    2010-05-23

    ECHO-7 is a proof-of-principle echo-enabled harmonic generation FEL experiment in the Next Linear Collider Test Accelerator (NLCTA) at SLAC. The experiment aims to generate coherent radiation at 318 nm and 227 nm, which are the 5th and 7th harmonic of the infrared seed laser. In this paper we present the preliminary results from the commissioning run of the completed experimental setup which started in April 2010.

  14. Hellenic Amateur Astronomy Association's activities: Preliminary results on Perseids 2010

    Science.gov (United States)

    Maravelias, G.

    2011-01-01

    Preliminary results on the Perseids 2010 are presented. Visual and video observations were obtained by the author and a first reduction of the visual data shows that a maximum of ZHR ~120 was reached during the night 12-13 of August 2010. Moreover, a video setup was tested (DMK camera and UFO Capture v2) and the results show that, under some limitations, valuable data can be obtained.

  15. Influence of fluorides upon vegetation. Preliminary tests in gardon uses

    Energy Technology Data Exchange (ETDEWEB)

    Gautier, A.; Clausmann,, P.

    1919-01-01

    Pulverized birchwood charcoal extracted with hot acids and washed in boiling water gave a soil medium containing 1.87 mg F per kg. The soil was composed of purified charcoal, 1000 g; Al/sub 2/O/sub 3/ as a jelly, 120 g; CaCO/sub 3/, 730 g (F = 0.002), humus, 27.3 g; very fertile garden soil, 66.0 (F = 0.007); CaHPO/sub 4/, 24 g; KNO/sub 3/, 34 g; (NH/sub 4/)/sub 2/ SO/sub 4/, 30 g; NaCl, 3.0 g; MgCO/sub 3/, 68 g; MnCl/sub 2/, 0.80 g, ZnCO/sub 3/, 0.07; SiO/sub 2/ as jelly, 17.0; FeSO/sub 4/, 180.0; NaAsO/sub 4/, 1.4 g. This entire mixture contained 11 mg F per kg. Plants were grown in three four-liter pots, A, B, C. The pots contained the above mixture, one with charcoal, another with KF. Pot C contained good garden soil for control. The effects of F were estimated by measuring the height of the plant and when the seed was produced, the weight of the seed. Fluorine exerted a favorable influence upon Gressin alenois, cabbage; Spergula arvensis, Escholtzia California, spinach, yellow day-lilly, viperine, Oignon communis and hemp. An unfavorable influence was observed with dwarf peas and sweet peas.

  16. HIFiRE-5 Flight Test Preliminary Results (Postprint)

    Science.gov (United States)

    2013-11-01

    plane) coordinate, m (Figure 2) z = spanwise (yaw-plane) coordinate, m (Figure 2)  = vehicle angle of attack relative to wind, degrees (Figure 9...3 The HIFiRE-5 nosetip construction was similar to that of HIFiRE-1. 30 The nosetip consisted of an iridium - coated TZM tip, followed by a...of attack and yaw. Figure 7 illustrates the vehicle altitude and velocity as measured by the on-board DMARS inertial measurement unit and GPS

  17. Station Commander Job Analysis and Preliminary Test Validation Results

    Science.gov (United States)

    2005-10-01

    enjoy being in leadership positions. Persons high on this scale are confident of their abilities and gravitate towards leadership roles in groups . They...hurt feelings. Emergent Leadership The scale measures the degree to which a person takes on leadership roles in groups and in his or her interactions

  18. Study of fast reactor safety test facilities. Preliminary report

    Energy Technology Data Exchange (ETDEWEB)

    Bell, G.I.; Boudreau, J.E.; McLaughlin, T.; Palmer, R.G.; Starkovich, V.; Stein, W.E.; Stevenson, M.G.; Yarnell, Y.L.

    1975-05-01

    Included are sections dealing with the following topics: (1) perspective and philosophy of fast reactor safety analysis; (2) status of accident analysis and experimental needs; (3) experiment and facility definitions; (4) existing in-pile facilities; (5) new facility options; and (6) data acquisition methods. (DG)

  19. PRELIMINARY TESTING OF NANOPARTICLE EFFECTIVENESS IN BINDER JETTING APPLICATIONS

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, Alta C [ORNL; Elliott, Amy M [ORNL; Basti, Mufeed M [ORNL

    2016-01-01

    Binder jetting works by selectively depositing a binder with an inkjet print head into layers of powdered material. Compared with other metal Additive Manufacturing (AM) processes, binder jetting has significant potential for near-term adoption in manufacturing environments due to its reliability and throughput. The Achilles heel of binder jetting, however, is the inability to produce fully dense, single-alloy materials. The lack of density in printed binder jet parts is strictly dictated by the packing factor of the powder feedstock. Adding nanoparticles during printing will not only increase the part s packing factor but may also serve as a sintering aid. This study focuses on the effect of both the binder and nanoparticles on the final part density. As an unintended consequence of high nanoparticle loading, printed parts underwent a significant increase in porosity during the curing process. This unintended consequence is the apparent result of the nanoparticles blocking the exit of the solvent vapor during the curing step. Additionally, nanoparticle use for densification is validated with SEM imagery.

  20. Preliminary Testing For Anionic, Cationic and Non-ionic

    Directory of Open Access Journals (Sweden)

    Bokic, Lj.

    2007-11-01

    Full Text Available Detergents present a major environmental problem due to large quantities of surfactants released from laundries. For this reason, it is important to apply an appropriate analytical method for their determination. In this work, we propose two simple, fast and inexpensive analytical methods for anionic, cationic and non-ionic surfactant determination: thin layer chromatography (TLC separation for qualitative screening and quantitative potentiometric determination with ion-selective electrodes. These methods have been chosen because of their many advantages: rapidity, ease of operation, low cost of analysis and a wide variety of TLC application possibilities. The advantage of potentiometric titration is its very high degree of automation and very low detection limits obtained with different ion-selective electrodes applied for different surfactants.

  1. Expanded microchannel heat exchanger: design, fabrication and preliminary experimental test

    CERN Document Server

    Denkenberger, David C; Pearce, Joshua M; Zhai, John; 10.1177/0957650912442781

    2012-01-01

    This paper first reviews non-traditional heat exchanger geometry, laser welding, practical issues with microchannel heat exchangers, and high effectiveness heat exchangers. Existing microchannel heat exchangers have low material costs, but high manufacturing costs. This paper presents a new expanded microchannel heat exchanger design and accompanying continuous manufacturing technique for potential low-cost production. Polymer heat exchangers have the potential for high effectiveness. The paper discusses one possible joining method - a new type of laser welding named "forward conduction welding," used to fabricate the prototype. The expanded heat exchanger has the potential to have counter-flow, cross-flow, or parallel-flow configurations, be used for all types of fluids, and be made of polymers, metals, or polymer-ceramic precursors. The cost and ineffectiveness reduction may be an order of magnitude or more, saving a large fraction of primary energy. The measured effectiveness of the prototype with 28 micro...

  2. North Korean refugee doctors' preliminary examination scores

    Directory of Open Access Journals (Sweden)

    Sung Uk Chae

    2016-12-01

    Full Text Available Purpose Although there have been studies emphasizing the re-education of North Korean (NK doctors for post-unification of the Korean Peninsula, study on the content and scope of such re-education has yet to be conducted. Researchers intended to set the content and scope of re-education by a comparative analysis for the scores of the preliminary examination, which is comparable to the Korean Medical Licensing Examination (KMLE. Methods The scores of the first and second preliminary exams were analyzed by subject using the Wilcoxon signed rank test. The passing status of the group of NK doctors for KMLE in recent 3 years were investigated. The multiple-choice-question (MCQ items of which difficulty indexes of NK doctors were lower than those of South Korean (SK medical students by two times of the standard deviation of the scores of SK medical students were selected to investigate the relevant reasons. Results The average scores of nearly all subjects were improved in the second exam compared with the first exam. The passing rate of the group of NK doctors was 75%. The number of MCQ items of which difficulty indexes of NK doctors were lower than those of SK medical students was 51 (6.38%. NK doctors’ lack of understandings for Diagnostic Techniques and Procedures, Therapeutics, Prenatal Care, and Managed Care Programs was suggested as the possible reason. Conclusion The education of integrated courses focusing on Diagnostic Techniques and Procedures and Therapeutics, and apprenticeship-style training for clinical practice of core subjects are needed. Special lectures on the Preventive Medicine are likely to be required also.

  3. Preliminaries

    Directory of Open Access Journals (Sweden)

    Desde el jardín de Freud

    2014-10-01

    Full Text Available Desde el Jardín de Freud se encuentra indexada en el IBN-Publindex (Colciencias, en categoría C, y en Latindex. También se encuentra en las siguientes bases de datos y catálogos: ebsco, Dialnet, Rebiun, Doaj y e-Revistas.

  4. Preliminary considerations concerning actinide solubilities

    Energy Technology Data Exchange (ETDEWEB)

    Newton, T.W.; Bayhurst, B.P.; Daniels, W.R.; Erdal, B.R.; Ogard, A.E.

    1980-01-01

    Work at the Los Alamos Scientific Laboratory on the fundamental solution chemistry of the actinides has thus far been confined to preliminary considerations of the problems involved in developing an understanding of the precipitation and dissolution behavior of actinide compounds under environmental conditions. Attempts have been made to calculate solubility as a function of Eh and pH using the appropriate thermodynamic data; results have been presented in terms of contour maps showing lines of constant solubility as a function of Eh and pH. Possible methods of control of the redox potential of rock-groundwater systems by the use of Eh buffers (redox couples) is presented.

  5. BUGJEFF311.BOLIB (JEFF-3.1.1 and BUGENDF70.BOLIB (ENDF/B-VII.0 – Generation Methodology and Preliminary Testing of two ENEA-Bologna Group Cross Section Libraries for LWR Shielding and Pressure Vessel Dosimetry

    Directory of Open Access Journals (Sweden)

    Pescarini Massimo

    2016-01-01

    Full Text Available Two broad-group coupled neutron/photon working cross section libraries in FIDO-ANISN format, dedicated to LWR shielding and pressure vessel dosimetry applications, were generated following the methodology recommended by the US ANSI/ANS-6.1.2-1999 (R2009 standard. These libraries, named BUGJEFF311.BOLIB and BUGENDF70.BOLIB, are respectively based on JEFF-3.1.1 and ENDF/B-VII.0 nuclear data and adopt the same broad-group energy structure (47 n + 20 γ of the ORNL BUGLE-96 similar library. They were respectively obtained from the ENEA-Bologna VITJEFF311.BOLIB and VITENDF70.BOLIB libraries in AMPX format for nuclear fission applications through problem-dependent cross section collapsing with the ENEA-Bologna 2007 revision of the ORNL SCAMPI nuclear data processing system. Both previous libraries are based on the Bondarenko self-shielding factor method and have the same AMPX format and fine-group energy structure (199 n + 42 γ as the ORNL VITAMIN-B6 similar library from which BUGLE-96 was obtained at ORNL. A synthesis of a preliminary validation of the cited BUGLE-type libraries, performed through 3D fixed source transport calculations with the ORNL TORT-3.2 SN code, is included. The calculations were dedicated to the PCA-Replica 12/13 and VENUS-3 engineering neutron shielding benchmark experiments, specifically conceived to test the accuracy of nuclear data and transport codes in LWR shielding and radiation damage analyses.

  6. Topaz II preliminary safety assessment

    Science.gov (United States)

    Marshall, Albert C.; Standley, Vaughn; Voss, Susan S.; Haskin, Eric

    1993-01-01

    The Strategic Defense Initiative Organization (SDIO) decided to investigate the possibility of launching a Russian Topaz II space nuclear power system. A preliminary safety assessment was conducted to determine whether or not a space mission could be conducted safely and within budget constraints. As part of this assessment, a safety policy and safety functional requirements were developed to guide both the safety assessment and future Topaz II activities. A review of the Russian flight safety program was conducted and documented. Our preliminary safety assessment included a top level event tree, neutronic analysis of normal and accident configurations, an evaluation of temperature coefficients of reactivity, a reentry and disposal analysis, and analysis of postulated launch abort impact accidents, and an analysis of postulated propellant fire and explosion accidents. Based on the assessment, it appears that it will be possible to safely launch the Topaz II system in the U.S. with some possible system modifications. The principal system modifications will probably include design changes to preclude water flooded criticality and to assure intact reentry.

  7. Preliminary Report on Coining of Targets

    Energy Technology Data Exchange (ETDEWEB)

    Davis, P; Wall, M; Hodge, N; Schwartz, A

    2004-07-27

    We were tasked with developing a coining technique that would evaluate the feasibility of using a pressing, or coining process to imprint a one-dimensional sinusoidal pattern onto a thin disk specimen. We performed finite element method simulations of the coining process, designed, built, and tested a coining apparatus and tested surrogate materials, and coined a sample of special nuclear material. The preliminary results were encouraging. The pressing of a 3-mm diameter by {approx}100 {micro}m thick disc to 500 pounds of pressure produced a flat part with a 1-{micro}m deep by 50-{micro}m period sine wave pattern covering all of the surface and thus demonstrated the method for replicating ultraprecision, mesoscale features onto a near-net-shape metallic blank. This coining technique is being developed to provide specialty processing for the manufacturing of difficult to machine, millimeter-size components made from materials that present hazardous conditions. The technology is versatile and can be used to imprint a wide range of features, or profiles into two opposing surfaces. The coining process requires a simple, conceivably hand held tool, which efficiently produces ultra-precision work pieces without the production of byproducts such as machining chips, or grinding swarf. It shows promise for use on ductile materials that cannot be precision machined with conventional single crystal diamond tooling. As a production process, it can be used to reduce manufacturing costs where large numbers of ultra-precision, repetitive designs are required.

  8. Instrument Thermal Test Bed - A unique two phase test facility

    Science.gov (United States)

    Swanson, Theodore; Didion, Jeffrey

    1991-01-01

    The Instrument Thermal Test Bed (ITTB) is a modular, large-scale test facility which provides a medium for ground testing and flight qualification of spacecraft thermal control components and system configurations. The initial 'shade-down' operations are discussed herein. Operational parameters and performance characteristics were determined and quantified on a preliminary basis. The ITTB was successfully operated at evaporator power loads ranging from 600 W to 9600 W as well as in both capillary pumped and series hybrid pumped modes.

  9. Cusum charts for preliminary analysis of individual observations

    OpenAIRE

    1997-01-01

    textabstractA preliminary Cusum chart based on individual observations is developed from the uniformly most powerful test for the detection of linear trends. This Cusum chart is compared with several of its competitors which are based on the likelihood ratio test and on transformations of standardized recursive residuals on which for instance the Q-chart methodology is based. It turns out that the new proposed Cusum chart is not only superior in the detection of linear trend out-of-control co...

  10. Beam Dynamics for the CTF3 Preliminary Phase

    CERN Document Server

    Corsini, R; Rinolfi, Louis; Risselada, Thys; Royer, P; Tecker, F A

    2001-01-01

    In the framework of the CLIC RF power source studies, the new scheme of electron pulse compression and bunch frequency multiplication, using injection by RF deflectors into an isochronous ring, will be tested at CERN during the CTF3 preliminary phase. The present LPI complex will be modified in order to allow a test of this scheme at low charge. The design of the new front-end, of the modified linac, of the matched transfer line, and of the isochronous ring lattice is presented here.The results of the related beam dynamics studies are also discussed.

  11. AGC-1 Experiment and Final Preliminary Design Report

    Energy Technology Data Exchange (ETDEWEB)

    Robert L. Bratton; Tim Burchell

    2006-08-01

    This report details the experimental plan and design as of the preliminary design review for the Advanced Test Reactor Graphite Creep-1 graphite compressive creep capsule. The capsule will contain five graphite grades that will be irradiated in the Advanced Test Reactor at the Idaho National Laboratory to determine the irradiation induced creep constants. Seven other grades of graphite will be irradiated to determine irradiated physical properties. The capsule will have an irradiation temperature of 900 C and a peak irradiation dose of 5.8 x 10{sup 21} n/cm{sup 2} [E > 0.1 MeV], or 4.2 displacements per atom.

  12. Psychoeducation training on stress management strategies as an addition to the therapy of temporomandibular joint dysfunction – preliminary studies

    Directory of Open Access Journals (Sweden)

    Joanna Marta Biegańska

    2016-05-01

    Preliminary results suggest that the developed psychoeducation programme improves emotional status of patients receiving prosthetic treatment for temporomandibular disorders. Development of an algorithm for these patients needs further research and testing.

  13. Preliminary functional assessment of a multigrasp myoelectric prosthesis.

    Science.gov (United States)

    Dalley, Skyler A; Bennett, Daniel A; Goldfarb, Michael

    2012-01-01

    The authors have previously described a multigrasp hand prosthesis prototype, and a two-site surface EMG based multigrasp control interface for its control. In this paper, the authors present a preliminary assessment of the efficacy of the prosthesis and multigrasp controller in performing tasks requiring interaction and manipulation. The authors use as a performance measure the Southampton Hand Assessment Procedure (SHAP), which entails manipulation of various objects designed to emulate activities of daily living, and provides a set of scores that indicate level of functionality in various types of hand function. In this preliminary assessment, a single non-amputee subject performed the SHAP while wearing the multigrasp prosthesis via an able-bodied adaptor. The results from this testing are presented, and compared to recently published SHAP results obtained with commercially available single-grasp and multigrasp prosthetic hands.

  14. 23 CFR 645.109 - Preliminary engineering.

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Preliminary engineering. 645.109 Section 645.109 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS UTILITIES Utility Relocations, Adjustments, and Reimbursement § 645.109 Preliminary engineering. (a) As...

  15. 33 CFR 116.10 - Preliminary review.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Preliminary review. 116.10... ALTERATION OF UNREASONABLY OBSTRUCTIVE BRIDGES § 116.10 Preliminary review. (a) Upon receipt of a written complaint, the District Commander will review the complaint to determine if, in the District...

  16. Plutonium Immobilization Can Loading Preliminary Specifications

    Energy Technology Data Exchange (ETDEWEB)

    Kriikku, E.

    1998-11-25

    This report discusses the Plutonium Immobilization can loading preliminary equipment specifications and includes a process block diagram, process description, equipment list, preliminary equipment specifications, plan and elevation sketches, and some commercial catalogs. This report identifies loading pucks into cans and backfilling cans with helium as the top priority can loading development areas.

  17. 18 CFR 1b.6 - Preliminary investigations.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Preliminary investigations. 1b.6 Section 1b.6 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY GENERAL RULES RULES RELATING TO INVESTIGATIONS § 1b.6 Preliminary investigations....

  18. Progress of General Test Stand for Intensive Beam Cyclotron

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>The general test stand for intensive beam cyclotron is one of the preliminary tasks of BRIF project at CIAE. The test stand, which actually is a small compact cyclotron with designed energy of 10 MeV,

  19. KALIMER preliminary conceptual design report

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, Do Hee; Kim, Y. J.; Kim, Y. G. and others

    2000-08-01

    This report, which summarizes the result of preliminary conceptual design activities during Phase 1, follows the format of safety analysis report. The purpose of publishing this report is to gather all of the design information developed so far in a systematic way so that KALIMER designers have a common source of the consistent design information necessary for their future design activities. This report will be revised and updated as design changes occur and more detailed design specification is developed during Phase 2. Chapter 1 describes the KALIMER Project. Chapter 2 includes the top level design requirements of KALIMER and general plant description. Chapter 3 summarizes the design of structures, components, equipment and systems. Specific systems and safety analysis results are described in the remaining chapters. Appendix on the HCDA evaluation is attached at the end of this report.

  20. Toward Better Oversight of NGS Tests.

    Science.gov (United States)

    2016-09-01

    The FDA has published two draft guidance documents aimed at streamlining its oversight of tests based on next-generation sequencing (NGS). One contains preliminary recommendations addressing the analytic validity of NGS-based tests for hereditary diseases; the other explains how test developers can obtain official recognition of their genetic variant databases, potentially speeding marketing clearance or approval.

  1. STACEE-32: Design, performance, and preliminary results

    Science.gov (United States)

    Ong, Rene A.

    2000-06-01

    The Solar Tower Atmospheric Cherenkov Effect Experiment (STACEE) is designed to detect astrophysical sources of γ-rays at energies between 25 and 500 GeV. STACEE uses large solar mirrors (heliostats) to collect the atmospheric Cherenkov radiation produced in γ-ray air showers. The use of a large mirror collection area will allow STACEE to probe γ-ray sources at energies above the reach of the Compton Gamma Ray Observatory (CGRO), but below the reach of conventional Cherenkov telescopes. During the 1998-99 observing season, a portion of STACEE using 32 heliostats was installed at the National Solar Thermal Test Facility (NSTTF) of Sandia National Laboratories (Albuquerque, NM). This initial configuration (STACEE-32) observed a number of astronomical sources, including the Crab and several active galactic nuclei (AGN). Here we report on these observations. We highlight the experimental configuration and the preliminary results from the Crab data. The full STACEE experiment using 64 heliostats will be commissioned in 2000. .

  2. In-situ testing of the liquefaction potential of soft ground using an s-wave vibrator and seismic cones. Part 1. System, concept and preliminary test result; S ha vibrator oyobi seismic cone wo mochiita gen`ichi jiban ekijoka potential no hyoka. 1. System kosei oyobi genchi yosatsu keisoku kekka

    Energy Technology Data Exchange (ETDEWEB)

    Inazaki, T. [Public Works Research Institute, Tsukuba (Japan)

    1996-05-01

    For the purpose of evaluating liquefaction in situ, it was proposed that an S-wave vibrator designed to serve as a source in a reflection exploration method be utilized as a strong vibration generating source, and measurement was conducted in this connection. Equipment used in this test included an S-wave vibrator, static cone penetration machine, and various measuring cones. A multiplicity of measuring cones had been inserted beforehand into the target layers and comparison layers, and changes upon vibrator activation were measured. On a dry bed of the Tonegawa river, a 40m{sup 2} field was set up, and 41 cone penetration tests were conducted, with the cones positioned zigzag at 5m intervals. In this way, the ground structure was disclosed from the surface to the 10m-deep level. For the measurement, 3-component cones and seismic cones were placed at prescribed depths, and fluctuations and waveforms presented by pore water pressure at each level were determined with the vibration source changing its place. It was found that the changes in the pore water pressure exposed to vibration assume characteristic patterns corresponding to the conditions of vibration application. 5 figs., 1 tab.

  3. Preliminary evaluation of two new cable surface innovations

    DEFF Research Database (Denmark)

    Burlina, Celeste; Georgakis, Christos T.; Larsen, S.V.;

    2015-01-01

    In this paper, the aerodynamic performance of two innovative bridge cable surfaces with concave fillets are examined and compared with traditional helical fillets. To this end, an extensive wind-tunnel test campaign was undertaken to measure the aerodynamic static force coefficients up to a Reyno......In this paper, the aerodynamic performance of two innovative bridge cable surfaces with concave fillets are examined and compared with traditional helical fillets. To this end, an extensive wind-tunnel test campaign was undertaken to measure the aerodynamic static force coefficients up...... to a Reynolds number of 3.2 x 105. The tests confirmed the results obtained from the preliminary tests performed by Kleissl and Georgakis (2013) on the prototype cable surfaces with the concave fillets. Despite a more than 100% increase of the fillet height compared to a traditional helical fillet profile...

  4. Astor Pass Seismic Surveys Preliminary Report

    Energy Technology Data Exchange (ETDEWEB)

    Louie, John [UNR; Pullammanappallil, Satish [Optim; Faulds, James; Eisses, Amy; Kell, Annie; Frary, Roxanna; Kent, Graham

    2011-08-05

    In collaboration with the Pyramid Lake Paiute Tribe (PLPT), the University of Nevada, Reno (UNR) and Optim re-processed, or collected and processed, over 24 miles of 2d seismic-reflection data near the northwest corner of Pyramid Lake, Nevada. The network of 2d land surveys achieved a near-3d density at the Astor Pass geothermal prospect that the PLPT drilled during Nov. 2010 to Feb. 2011. The Bureau of Indian Affairs funded additional seismic work around the Lake, and an extensive, detailed single-channel marine survey producing more than 300 miles of section, imaging more than 120 ft below the Lake bottom. Optim’s land data collection utilized multiple heavy vibrators and recorded over 200 channels live, providing a state-of-the-art reflection-refraction data set. After advanced seismic analysis including first-arrival velocity optimization and prestack depth migration, the 2d sections show clear fault-plane reflections, in some areas as deep as 4000 ft, tying to distinct terminations of the mostly volcanic stratigraphy. Some lines achieved velocity control to 3000 ft depth; all lines show reflections and terminations to 5000 ft depth. Three separate sets of normal faults appear in an initial interpretation of fault reflections and stratigraphic terminations, after loading the data into the OpendTect 3d seismic visualization system. Each preliminary fault set includes a continuous trace more than 3000 ft long, and a swarm of short fault strands. The three preliminary normal-fault sets strike northerly with westward dip, northwesterly with northeast dip, and easterly with north dip. An intersection of all three fault systems documented in the seismic sections at the end of Phase I helped to locate the APS-2 and APS-3 slimholes. The seismic sections do not show the faults connected to the Astor Pass tufa spire, suggesting that we have imaged mostly Tertiary-aged faults. We hypothesize that the Recent, active faults that produced the tufa through hotspring

  5. Preliminary evidence for a cognitive phenotype in Barth syndrome.

    Science.gov (United States)

    Mazzocco, M M; Kelley, R I

    2001-09-01

    Barth syndrome (BTHS) is a rare, X-linked, recessive disorder that affects almost exclusively males. It is characterized by short stature, cardioskeletal myopathy, cyclic neutropenia, increased excretion of 3-methylglutaconic acid in the urine, and moderate hypocholesterolemia. The objective of the present study was to assess whether BTHS presents with a cognitive phenotype. Preliminary data were collected from five kindergarten or first-grade boys with BTHS. An abbreviated psychoeducational test battery was administered to each boy, and parents of each boy completed standardized behavior rating scales. Data from 120 boys of similar age or grade level were used for one comparison group; a subset of this sample comprised a comparison group that was individually matched on age and grade level to one of the five boys with BTHS. Preliminary data reflect a higher incidence of cognitive difficulties in boys with BTHS relative to both comparison groups. Boys with BTHS had significantly lower visual spatial skills, but comparable reading-related skills, when compared with either group. Although based on a small sample size, the preliminary data presented in this work are the first indication of a cognitive phenotype associated with BTHS.

  6. Births: preliminary data for 2012.

    Science.gov (United States)

    Hamilton, Brady E; Martin, Joyce A; Ventura, Stephanie J

    2013-09-01

    Objectives-This report presents preliminary data for 2012 on births in the United States. U.S. data on births are shown by age, live-birth order, race, and Hispanic origin of mother. Data on marital status, cesarean delivery, preterm births, and low birthweight are also presented. Methods-Data in this report are based on 99.96% of 2012 births.Records for the few states with less than 100% of records received are weighted to independent control counts of all births received in state vital statistics offices in 2012. Comparisons are made with final 2011 data. Results-The preliminary number of births for the United States in 2012 was 3,952,937, essentially unchanged (not statistically significant) from 2011; the general fertility rate was 63.0 births per 1,000 women aged 15-44, down only slightly from 2011, after declining nearly 3% a year from 2007 through 2010. The number of births and fertility rate either declined or were unchanged for most race and Hispanic origin groups from 2011 to 2012; however, both the number of births and the fertility rate for Asian or Pacific Islander women rose in 2012 (7% and 4%, respectively). The birth rate for teenagers aged 15-19 was down 6% in 2012 (29.4 births per 1,000 teenagers aged 15-19), yet another historic low for the United States, with rates declining for younger and older teenagers and for nearly all race and Hispanic origin groups. The birth rate for women in their early 20s also declined in 2012, to a new record low of 83.1 births per 1,000 women. Birth rates for women in their 30s rose in 2012, as did the birth rate for women in their early 40s. The birth rate for women in their late 40s was unchanged. The nonmarital birth rate declined in 2012 (to 45.3 birth per 1,000 unmarried women aged 15-44), whereas the number of births to unmarried women rose 1% and the percentage of births to unmarried women was unchanged (at 40.7%). The cesarean delivery rate for the United States was unchanged in 2012 at 32.8%. The preterm

  7. Preliminary Iron Distribution on Vesta

    Science.gov (United States)

    Mittlefehldt, David W.; Mittlefehldt, David W.

    2013-01-01

    The distribution of iron on the surface of the asteroid Vesta was investigated using Dawn's Gamma Ray and Neutron Detector (GRaND) [1,2]. Iron varies predictably with rock type for the howardite, eucrite, and diogenite (HED) meteorites, thought to be representative of Vesta. The abundance of Fe in howardites ranges from about 12 to 15 wt.%. Basaltic eucrites have the highest abundance, whereas, lower crustal and upper mantle materials (cumulate eucrites and diogenites) have the lowest, and howardites are intermediate [3]. We have completed a mapping study of 7.6 MeV gamma rays produced by neutron capture by Fe as measured by the bismuth germanate (BGO) detector of GRaND [1]. The procedures to determine Fe counting rates are presented in detail here, along with a preliminary distribution map, constituting the necessary initial step to quantification of Fe abundances. We find that the global distribution of Fe counting rates is generally consistent with independent mineralogical and compositional inferences obtained by other instruments on Dawn such as measurements of pyroxene absorption bands by the Visual and Infrared Spectrometer (VIR) [4] and Framing Camera (FC) [5] and neutron absorption measurements by GRaND [6].

  8. EUPORIAS: plans and preliminary results

    Science.gov (United States)

    Buontempo, C.

    2013-12-01

    Recent advances in our understanding and ability to forecast climate variability have meant that skilful predictions are beginning to be routinely made on seasonal to decadal (s2d) timescales. Such forecasts have the potential to be of great value to a wide range of decision-making, where outcomes are strongly influenced by variations in the climate. In 2012 the European Commission funded EUPORIAS, a four year long project to develop prototype end-to-end climate impact prediction services operating on a seasonal to decadal timescale, and assess their value in informing decision-making. EUPORIAS commenced on 1 November 2012, coordinated by the UK Met Office leading a consortium of 24 organisations representing world-class European climate research and climate service centres, expertise in impacts assessments and seasonal predictions, two United Nations agencies, specialists in new media, and commercial companies in climate-vulnerable sectors such as energy, water and tourism. The poster describes the setup of the project, its main outcome and some of the very preliminary results.

  9. Preliminary results of ANAIS-25

    CERN Document Server

    Amaré, J; Cuesta, C; García, E; Ginestra, C; Martínez, M; Oliván, M A; Ortigoza, Y; de Solórzano, A Ortiz; Pobes, C; Puimedón, J; Sarsa, M L; Villar, P; Villar, J A

    2013-01-01

    The ANAIS (Annual Modulation with NaI(Tl) Scintillators) experiment aims at the confirmation of the DAMA/LIBRA signal using the same target and technique at the Canfranc Underground Laboratory. 250 kg of ultrapure NaI(Tl) crystals will be used as a target, divided into 20 modules, each coupled to two photomultipliers. Two NaI(Tl) crystals of 12.5 kg each, grown by Alpha Spectra from a powder having a potassium level under the limit of our analytical techniques, form the ANAIS-25 set-up. The background contributions are being carefully studied and preliminary results are presented: their natural potassium content in the bulk has been quantified, as well as the uranium and thorium radioactive chains presence in the bulk through the discrimination of the corresponding alpha events by PSA, and due to the fast commissioning, the contribution from cosmogenic activated isotopes is clearly identified and their decay observed along the first months of data taking. Following the procedures established with ANAIS-0 and ...

  10. Stardust Interstellar Preliminary Examination (ISPE)

    Science.gov (United States)

    Westphal, A. J.; Allen, C.; Bajt, S.; Basset, R.; Bastien, R.; Bechtel, H.; Bleuet, P.; Borg, J.; Brenker F.; Bridges, J.

    2009-01-01

    In January 2006 the Stardust sample return capsule returned to Earth bearing the first solid samples from a primitive solar system body, C omet 81P/Wild2, and a collector dedicated to the capture and return o f contemporary interstellar dust. Both collectors were approximately 0.1m(exp 2) in area and were composed of aerogel tiles (85% of the co llecting area) and aluminum foils. The Stardust Interstellar Dust Col lector (SIDC) was exposed to the interstellar dust stream for a total exposure factor of 20 m(exp 2-) day during two periods before the co metary encounter. The Stardust Interstellar Preliminary Examination ( ISPE) is a three-year effort to characterize the collection using no ndestructive techniques. The ISPE consists of six interdependent proj ects: (1) Candidate identification through automated digital microsco py and a massively distributed, calibrated search (2) Candidate extr action and photodocumentation (3) Characterization of candidates thro ugh synchrotronbased FourierTranform Infrared Spectroscopy (FTIR), S canning XRay Fluoresence Microscopy (SXRF), and Scanning Transmission Xray Microscopy (STXM) (4) Search for and analysis of craters in f oils through FESEM scanning, Auger Spectroscopy and synchrotronbased Photoemission Electron Microscopy (PEEM) (5) Modeling of interstell ar dust transport in the solar system (6) Laboratory simulations of h ypervelocity dust impacts into the collecting media

  11. Preliminary investigation into the possible endocrine disrupting ...

    African Journals Online (AJOL)

    JTEkanem

    In this study, we quantified the effect of Bonny- light crude oil contaminated diet ... This preliminary result suggest that Bonny-Light crude oil may have the potential .... different components. Its exploration ... organisms found in crude oil polluted.

  12. 42 CFR 457.925 - Preliminary investigation.

    Science.gov (United States)

    2010-10-01

    ... (CONTINUED) STATE CHILDREN'S HEALTH INSURANCE PROGRAMS (SCHIPs) ALLOTMENTS AND GRANTS TO STATES Program Integrity § 457.925 Preliminary investigation. If the State agency receives a complaint of fraud or abuse...

  13. Preliminary design data package. Appendix C

    Energy Technology Data Exchange (ETDEWEB)

    1979-07-25

    The design requirements, design philosophy, method and assumptions, and preliminary computer-aided design of the Near-Term Hybrid Vehicle including its electric and heat power units, control equipment, transmission system, body, and overall vehicle characteristics are presented. (LCL)

  14. Preliminary project proposal : Missouri chutes, NE & IA

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This proposal is for the Missouri Chutes National Wildlife Refuge that would be in Nebraska and Iowa on the Missouri River. This preliminary project proposal focuses...

  15. Preliminary Survey of Ectoparasites Infesting Chickens (Gallus ...

    African Journals Online (AJOL)

    Preliminary Survey of Ectoparasites Infesting Chickens (Gallus domesticus) in. Four Areas of ... were identified with the following prevalences: the shaft louse, Menopon gallinae (8.1%), the chicken ..... Canis lupus familiaris in Mueang district ...

  16. Renewable Energy Park - Preliminary Feasibility & Engineering Report

    Energy Technology Data Exchange (ETDEWEB)

    Ariwite, Roderick [Fallon Paiute Shoshone Tribe, NV (United States)

    2015-07-31

    This "Renewable Energy Park - Preliminary Feasibility & Engineering Report" seeks to provide an overall assessment and review of renewable energy development opportunities on the Fallon Indian Reservation and Colony Lands.

  17. Preliminary Determination of Epicenters (PDE) Bulletin

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The NEIC global earthquake bulletin is called the Preliminary Determination of Epicenters or PDE, and is one of many discrete products in the ANSS Comprehensive...

  18. Alaska gold rush trails study: Preliminary draft

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Preliminary study draft, with maps, of seven gold rush trails in Alaska, to determine suitability for inclusion in the National Scenic Trails system and their...

  19. Preliminary organizational culture scale focused on artifacts.

    Science.gov (United States)

    Bonavia, Tomas

    2006-12-01

    In this preliminary study, an Organizational Culture Scale was developed to assess cultural artifacts according to Schein's typology (1985). It includes a set of cultural artifacts to measure the extent to which an organization is more or less traditional. A total of 249 managers from a range of different companies responded to the items. Preliminary analysis yielded a one-dimensional scale with 14 items with high internal consistency and homogeneity.

  20. Preliminary organizational culture scale focused on artifacts

    OpenAIRE

    Bonavia, Tomas

    2006-01-01

    In this preliminary study, an organizational culture scale was developed to assess cultural artifacts according to Schein´s typology (1985). It includes a set of cultural artifacts to measure the extent to which an organization is more or less traditional. A total of 249 managers from a range of different companies responded to the items. Preliminary analysis yielded a one-dimensional scale with 14 items with high internal consistency and homogeneity.

  1. Preliminary AD-Horn Thermomechanical and Electrodynamic Simulations

    CERN Document Server

    AUTHOR|(CDS)2095747; Horvath, David; Calviani, Marco

    2016-01-01

    As part of the Antiproton Decelerator (AD) target area consolidation activities planned for LS2, it has been necessary to perform a comprehensive study of the thermo-structural behaviour of the AD magnetic horn during operation, in order to detail specific requirements for the upgrade projects and testing procedures. The present work illustrates the preliminary results of the finite element analysis carried out to evaluate the thermal and structural behaviour of the device, as well as the methodology used to model and solve the thermomechanical and electrodynamic simulations performed in the AD magnetic horn.

  2. Bates solar industrial process-steam application: preliminary design review

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-07

    The design is analyzed for a parabolic trough solar process heat system for a cardboard corrugation fabrication facility in Texas. The program is briefly reviewed, including an analysis of the plant and process. The performance modeling for the system is discussed, and the solar system structural design, collector subsystem, heat transport and distribution subsystem are analyzed. The selection of the heat transfer fluid, and ullage and fluid maintenance are discussed, and the master control system and data acquisition system are described. Testing of environmental degradation of materials is briefly discussed. A brief preliminary cost analysis is included. (LEW)

  3. The MUSE Data Reduction Pipeline: Status after Preliminary Acceptance Europe

    CERN Document Server

    Weilbacher, Peter M; Urrutia, Tanya; Pécontal-Rousset, Arlette; Jarno, Aurélien; Bacon, Roland

    2015-01-01

    MUSE, a giant integral field spectrograph, is about to become the newest facility instrument at the VLT. It will see first light in February 2014. Here, we summarize the properties of the instrument as built and outline functionality of the data reduction system, that transforms the raw data that gets recorded separately in 24 IFUs by 4k CCDs, into a fully calibrated, scientifically usable data cube. We then describe recent work regarding geometrical calibration of the instrument and testing of the processing pipeline, before concluding with results of the Preliminary Acceptance in Europe and an outlook to the on-sky commissioning.

  4. Preliminary study on rockfall for Al Gayah site in Yemen

    Institute of Scientific and Technical Information of China (English)

    Aref M. O. Al-Jabali; WANG Xi-kui

    2004-01-01

    Studying the landslide and rockfall in Yemen still in its preliminary stage. Al Gayah rockfall site is a chronic problem as many other areas in the Republic of Yemen. The present authors have tried to highlight, and find best solution for this problem for the first time. Field work, collecting data and laboratory test for many rock samples such physical properties, chemical for major elements and thin section have been carried out. The physical properties performed according to ASTM, and then the result have been gotten and discussed.

  5. A preliminary experimental investigation into lateral pedestrian-structure interaction

    DEFF Research Database (Denmark)

    Ingólfsson, Einar Thór; Georgakis, Christos; Knudsen, Anders

    2008-01-01

    This paper presents results from a preliminary experimental study on lateral human-structure dynamic interaction on footbridges using an instrumented platform. The platform has a natural frequency within the range of an average pedestrian and consists of a suspended concrete girder. With a length...... of 17 m and weight of 19.6 ton, the platform provides a realistic comparison to an actual footbridge. Based on experiments with single pedestrians walking across the platform at resonance, the fundamental dynamic load factor is determined using only the recorded acceleration signal. Furthermore, tests...

  6. Recent Development and Preliminary Results of Chinese Meridian Project

    Institute of Scientific and Technical Information of China (English)

    WANG Chi; REN Liwen

    2013-01-01

    The Meridian Project is a ground-based network program to monitor solar-terrestrial space environment,which consists of a chain of 15 ground-based observatories located roughly along 120°E longitude and 30°N latitude.The Meridian project started in 2008,and its construction was completed by 2011.The integration and test phase of the Meridian Project conducted in 2011 demonstrated its observation capabilities as expected.The project will be in full operation in 2012.This report gives an overview of the recent development and preliminary results of the Meridian Project since 2010.

  7. Student-Created Vocabulary Tests

    OpenAIRE

    Patterson, Donald

    2016-01-01

    In this paper is described a preliminary study at a Japanese university on student affect toward self-created vocabulary tests. In order to foster greater learner autonomy in their vocabulary study, students were tasked with selecting words they wished to learn and creating their own tests using a template provided by the teacher. At the end of the course, a survey examining student attitudes toward the activity was conducted with 140 participants. The results were encouraging as they indicat...

  8. Preliminary design of the ITER ECH Upper Launcher

    Energy Technology Data Exchange (ETDEWEB)

    Strauss, D., E-mail: dirk.strauss@kit.edu [Karlsruhe Institute of Technology, Assoc. KIT-EURATOM, D-76021 Karlsruhe (Germany); Aiello, G. [Karlsruhe Institute of Technology, Assoc. KIT-EURATOM, D-76021 Karlsruhe (Germany); Chavan, R. [Centre de Recherches en Physique des Plasmas, CRPP–EPFL, CH-1015 Lausanne (Switzerland); Cirant, S. [Istituto di Fisica del Plasma CNR, Euratom Association, 20125 Milano (Italy); Baar, M. de [FOM, Van Vollenhovenlaan 659, 3527 JP, Utrecht (Netherlands); Farina, D. [Istituto di Fisica del Plasma CNR, Euratom Association, 20125 Milano (Italy); Gantenbein, G. [Karlsruhe Institute of Technology, Assoc. KIT-EURATOM, D-76021 Karlsruhe (Germany); Goodman, T.P. [Centre de Recherches en Physique des Plasmas, CRPP–EPFL, CH-1015 Lausanne (Switzerland); Henderson, M.A. [ITER Organization, 13108 Saint-Paul-lez-Durance (France); Kasparek, W. [Institut für Plasmaforschung, IPF, D-70569 Stuttgart (Germany); Kleefeldt, K. [Karlsruhe Institute of Technology, Assoc. KIT-EURATOM, D-76021 Karlsruhe (Germany); Landis, J.-D. [Centre de Recherches en Physique des Plasmas, CRPP–EPFL, CH-1015 Lausanne (Switzerland); Meier, A. [Karlsruhe Institute of Technology, Assoc. KIT-EURATOM, D-76021 Karlsruhe (Germany); Moro, A.; Platania, P. [Istituto di Fisica del Plasma CNR, Euratom Association, 20125 Milano (Italy); Plaum, B. [Institut für Plasmaforschung, IPF, D-70569 Stuttgart (Germany); Poli, E. [Max-Planck-IPP, Euratom Association, D-85748 Garching (Germany); Ramponi, G. [Istituto di Fisica del Plasma CNR, Euratom Association, 20125 Milano (Italy); Ronden, D. [FOM, Van Vollenhovenlaan 659, 3527 JP, Utrecht (Netherlands); Saibene, G. [Fusion for Energy, Barcelona (Spain); and others

    2013-11-15

    Highlights: • Front steering mirror design. • Plasma facing blanket shield module/first wall panel design. • Fixed frequency torus CVD diamond window serving as first tritium barrier. • Prototypes and tests of the above key components in the Launcher Handling and Testing Facility. -- Abstract: The design of the ITER electron cyclotron launchers recently reached the preliminary design level - the last major milestone before design finalization. The ITER ECH system contains 24 installed gyrotrons providing a maximum ECH injected power of 20 MW through transmission lines towards the tokamak. There are two EC launcher types both using a front steering mirror; one equatorial launcher (EL) for plasma heating and four upper launchers (UL) for plasma mode stabilization (neoclassical tearing modes and the sawtooth instability). A wide steering angle range of the ULs allows focusing of the beam on magnetic islands which are expected on the rational magnetic flux surfaces q = 1 (sawtooth instability), q = 3/2 and q = 2 (NTMs). In this paper the preliminary design of the ITER ECH UL is presented, including the optical system and the structural components. Highlights of the design include the torus CVD-diamond windows, the frictionless, front steering mechanism and the plasma facing blanket shield module (BSM). Numerical simulations as well as prototype tests are used to verify the design.

  9. Preliminary Investigation of Sulfur Loading in Hanford LAW Glass

    Energy Technology Data Exchange (ETDEWEB)

    Vienna, John D.; Hrma, Pavel R.; Buchmiller, William C.; Ricklefs, Joel S.

    2004-04-01

    A preliminary estimate was developed for loading limits for high-sulfur low-activity waste (LAW) feeds that will be vitrified into borosilicate glass at the Hanford Site in the waste-cleanup effort. Previous studies reported in the literature were consulted to provide a basis for the estimate. The examination of previous studies led to questions about sulfur loading in Hanford LAW glass, and scoping tests were performed to help answer these questions. These results of these tests indicated that a formulation approach developed by Vienna and colleagues shows promise for maximizing LAW loading in glass. However, there is a clear need for follow-on work. The potential for significantly lowering the amount of LAW glass produced at Hanford (after the initial phase of processing) because of higher sulfur tolerances may outweigh the cost and effort required to perform the necessary testing.

  10. Zika Virus Disease in Colombia - Preliminary Report.

    Science.gov (United States)

    Pacheco, Oscar; Beltrán, Mauricio; Nelson, Christina A; Valencia, Diana; Tolosa, Natalia; Farr, Sherry L; Padilla, Ana V; Tong, Van T; Cuevas, Esther L; Espinosa-Bode, Andrés; Pardo, Lissethe; Rico, Angélica; Reefhuis, Jennita; González, Maritza; Mercado, Marcela; Chaparro, Pablo; Martínez Duran, Mancel; Rao, Carol Y; Muñoz, María M; Powers, Ann M; Cuéllar, Claudia; Helfand, Rita; Huguett, Claudia; Jamieson, Denise J; Honein, Margaret A; Ospina Martínez, Martha L

    2016-06-15

    Background Colombia began official surveillance for Zika virus disease (ZVD) in August 2015. In October 2015, an outbreak of ZVD was declared after laboratory-confirmed disease was identified in nine patients. Methods Using the national population-based surveillance system, we assessed patients with clinical symptoms of ZVD from August 9, 2015, to April 2, 2016. Laboratory test results and pregnancy outcomes were evaluated for a subgroup of pregnant women. Concurrently, we investigated reports of microcephaly for evidence of congenital ZVD. Results By April 2, 2016, there were 65,726 cases of ZVD reported in Colombia, of which 2485 (4%) were confirmed by means of reverse-transcriptase-polymerase-chain-reaction (RT-PCR) assay. The overall reported incidence of ZVD among female patients was twice that in male patients. A total of 11,944 pregnant women with ZVD were reported in Colombia, with 1484 (12%) of these cases confirmed on RT-PCR assay. In a subgroup of 1850 pregnant women, more than 90% of women who were reportedly infected during the third trimester had given birth, and no infants with apparent abnormalities, including microcephaly, have been identified. A majority of the women who contracted ZVD in the first or second trimester were still pregnant at the time of this report. Among the cases of microcephaly investigated from January 2016 through April 2016, four patients had laboratory evidence of congenital ZVD; all were born to asymptomatic mothers who were not included in the ZVD surveillance system. Conclusions Preliminary surveillance data in Colombia suggest that maternal infection with the Zika virus during the third trimester of pregnancy is not linked to structural abnormalities in the fetus. However, the monitoring of the effect of ZVD on pregnant women in Colombia is ongoing. (Funded by Colombian Instituto Nacional de Salud and the Centers for Disease Control and Prevention.).

  11. Methodology for Preliminary Design of Electrical Microgrids

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, Richard P. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Stamp, Jason E. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Eddy, John P. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Henry, Jordan M [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Munoz-Ramos, Karina [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Abdallah, Tarek [U.S. Army Corps of Engineers, Washington, DC (United States)

    2015-09-30

    Many critical loads rely on simple backup generation to provide electricity in the event of a power outage. An Energy Surety Microgrid TM can protect against outages caused by single generator failures to improve reliability. An ESM will also provide a host of other benefits, including integration of renewable energy, fuel optimization, and maximizing the value of energy storage. The ESM concept includes a categorization for microgrid value proposi- tions, and quantifies how the investment can be justified during either grid-connected or utility outage conditions. In contrast with many approaches, the ESM approach explic- itly sets requirements based on unlikely extreme conditions, including the need to protect against determined cyber adversaries. During the United States (US) Department of Defense (DOD)/Department of Energy (DOE) Smart Power Infrastructure Demonstration for Energy Reliability and Security (SPIDERS) effort, the ESM methodology was successfully used to develop the preliminary designs, which direct supported the contracting, construction, and testing for three military bases. Acknowledgements Sandia National Laboratories and the SPIDERS technical team would like to acknowledge the following for help in the project: * Mike Hightower, who has been the key driving force for Energy Surety Microgrids * Juan Torres and Abbas Akhil, who developed the concept of microgrids for military installations * Merrill Smith, U.S. Department of Energy SPIDERS Program Manager * Ross Roley and Rich Trundy from U.S. Pacific Command * Bill Waugaman and Bill Beary from U.S. Northern Command * Melanie Johnson and Harold Sanborn of the U.S. Army Corps of Engineers Construc- tion Engineering Research Laboratory * Experts from the National Renewable Energy Laboratory, Idaho National Laboratory, Oak Ridge National Laboratory, and Pacific Northwest National Laboratory

  12. BASE Flexible Array Preliminary Lithospheric Structure Analysis

    Science.gov (United States)

    Yeck, W. L.; Sheehan, A. F.; Anderson, M. L.; Siddoway, C. S.; Erslev, E.; Harder, S. H.; Miller, K. C.

    2009-12-01

    The Bighorns Arch Seismic Experiment (BASE) is a Flexible Array experiment integrated with EarthScope. The goal of BASE is to develop a better understanding of how basement-involved foreland arches form and what their link is to plate tectonic processes. To achieve this goal, the crustal structure under the Bighorn Mountain range, Bighorn Basin, and Powder River Basin of northern Wyoming and southern Montana are investigated through the deployment of 35 broadband seismometers, 200 short period seismometers, 1600 “Texan” instruments using active sources and 800 “Texan” instruments monitoring passive sources, together with field structural analysis of brittle structures. The novel combination of these approaches and anticipated simultaneous data inversion will give a detailed structural crustal image of the Bighorn region at all levels of the crust. Four models have been proposed for the formation of the Bighorn foreland arch: subhorizontal detachment within the crust, lithospheric buckling, pure shear lithospheric thickening, and fault blocks defined by lithosphere-penetrating thrust faults. During the summer of 2009, we deployed 35 broadband instruments, which have already recorded several magnitude 7+ teleseismic events. Through P wave receiver function analysis of these 35 stations folded in with many EarthScope Transportable Array stations in the region, we present a preliminary map of the Mohorovicic discontinuity. This crustal map is our first test of how the unique Moho geometries predicted by the four hypothesized models of basement involved arches fit seismic observations for the Bighorn Mountains. In addition, shear-wave splitting analysis for our first few recorded teleseisms helps us determine if strong lithospheric deformation is preserved under the range. These analyses help lead us to our final goal, a complete 4D (3D spatial plus temporal) lithospheric-scale model of arch formation which will advance our understanding of the mechanisms

  13. Preliminary classification criteria for the cryoglobulinaemic vasculitis

    Science.gov (United States)

    De Vita, S; Soldano, F; Isola, M; Monti, G; Gabrielli, A; Tzioufas, A; Ferri, C; Ferraccioli, G F; Quartuccio, L; Corazza, L; De Marchi, G; Casals, M Ramos; Voulgarelis, M; Lenzi, M; Saccardo, F; Fraticelli, P; Mascia, M T; Sansonno, D; Cacoub, P; Tomsic, M; Tavoni, A; Pietrogrande, M; Zignego, A L; Scarpato, S; Mazzaro, C; Pioltelli, P; Steinfeld, S; Lamprecht, P; Bombardieri, S; Galli, M

    2011-01-01

    Background To develop preliminary classification criteria for the cryoglobulinaemic syndrome or cryoglobulinaemic vasculitis (CV). Methods Study part I developed a questionnaire for CV to be included in the formal, second part (study part II). Positivity of serum cryoglobulins was defined by experts as an essential condition for CV classification. In study part II, a core set of classification items (questionnaire, clinical and laboratory items, as agreed) was tested in three groups of patients and controls—that is, group A (new patients with the CV), group B (controls with serum cryoglobulins but lacking CV) and group C (controls without serum cryoglobulins but with features which can be observed in CV). Results In study part I (188 cases, 284 controls), a positive response to at least two of three selected questions showed a sensitivity of 81.9% and a specificity of 83.5% for CV. This questionnaire was employed and validated in study part II, which included 272 patients in group A and 228 controls in group B. The final classification criteria for CV, by pooling data from group A and group B, required the positivity of questionnaire plus clinical, questionnaire plus laboratory, or clinical plus laboratory items, or all the three, providing a sensitivity of 88.5% and a specificity of 93.6% for CV. By comparing data in group A versus group C (425 controls), the same classification criteria showed a sensitivity 88.5% and a specificity 97.0% for CV. Conclusion Classification criteria for CV were developed, and now need validation. PMID:21571735

  14. Preliminary Evaluation of a New Cosmology Curriculum

    Science.gov (United States)

    Coble, Kimberly A.; Martin, Dominique; Hayes, Patrycia; Targett, Tom; Bailey, Janelle M.; Cominsky, Lynn R.

    2015-01-01

    Informed by our research on student understanding of cosmology, The Big Ideas in Cosmology is an immersive set of web-based learning modules that integrates text, figures, and visualizations with short and long interactive tasks and real cosmological data. This enables the transformation of general education astronomy and cosmology classes from primarily lecture and book-based courses to a more engaging format that builds important STEM skills.During the spring 2014 semester, we field-tested a subset of chapters with the general education astronomy and cosmology classes at Sonoma State University in a flipped-classroom format. We administered pre and post content and attitude assessments in the two flipped classes as well as two lecture classes. The majority of cosmology students had taken astronomy before whereas the astronomy students had not.When switching to an active mode of learning (e.g., flipped classroom instead of lecture), many instructors report pushback from students. We saw this effect from students in course evaluations, who reported dissatisfaction with "having to do more work." However, the students in the flipped section in astronomy made greater gains on the multiple choice content assessment than the students in either of the two lecture sections. On the attitude assessment (the CLASS), the cosmology students made a small shift toward more expert-like opinions. Preliminary results from open-ended content surveys indicate that, prior to instruction, students had difficulty answering 'why' or 'how do we know' questions; that post-instruction, students are less likely to respond "I don't know" or to leave an answer blank; and that students using the modules made gains in their content knowledge.Module development was supported by NASA ROSES E/PO Grant #NNXl0AC89G, the Illinois Space Grant Consortium, the Fermi E/PO program, Sonoma State University's Space Science Education and Public Outreach Group, and Great River Technology

  15. Preliminary Strength Measurements of High Temperature Ash Filter Deposits

    Energy Technology Data Exchange (ETDEWEB)

    Kang, B.S.; Johnson, E.K.; Mallela, R.; Barberio, J.F. [West Virginia Univ., Morgantown, WV (United States). Dept. of Mechanical and Aerospace Engineering

    1996-12-31

    The objective of this study is to develop and evaluate preliminary strength measurement techniques for high temperature candle filter ash deposits. The efficient performance of a high temperature gas filtering system is essential for many of the new thermal cycles being proposed for power plants of the future. These new cycles hold the promise of higher thermal efficiency and lower emissions of pollutants. Many of these cycles involve the combustion or gasification of coal to produce high temperature gases to eventually be used in gas turbines. These high temperature gases must be relatively free of particulates. Today, the candle filter appears to be the leading candidate for high temperature particulate removal. The performance of a candle filter depends on the ash deposits shattering into relatively large particles during the pulse cleaning (back flushing) of the filters. These relatively large particles fall into the ash hopper and are removed from the system. Therefore, these 1247 particles must be sufficiently large so that they will not be re-entrained by the gas flow. The shattering process is dictated by the strength characteristics of the ash deposits. Consequently, the objective of this research is to develop measurements for the desired strength characteristics of the ash deposits. Experimental procedures were developed to measure Young`s modulus of the ash deposit at room temperature and the failure tensile strain of ash deposits from room temperature to elevated temperatures. Preliminary data has been obtained for both soft and hard ash deposits. The qualifier ``preliminary`` is used to indicate that these measurements are a first for this material, and consequently, the measurement techniques are not perfected. In addition, the ash deposits tested are not necessarily uniform and further tests are needed in order to obtain meaningful average data.

  16. Hydrogen Gas Retention and Release from WTP Vessels: Summary of Preliminary Studies

    Energy Technology Data Exchange (ETDEWEB)

    Gauglitz, Phillip A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bontha, Jagannadha R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Daniel, Richard C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Mahoney, Lenna A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Rassat, Scot D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wells, Beric E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bao, Jie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Boeringa, Gregory K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Buchmiller, William C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Burns, Carolyn A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Chun, Jaehun [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Karri, Naveen K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Li, Huidong [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tran, Diana N. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-07-01

    The Hanford Waste Treatment and Immobilization Plant (WTP) is currently being designed and constructed to pretreat and vitrify a large portion of the waste in the 177 underground waste storage tanks at the Hanford Site. A number of technical issues related to the design of the pretreatment facility (PTF) of the WTP have been identified. These issues must be resolved prior to the U.S. Department of Energy (DOE) Office of River Protection (ORP) reaching a decision to proceed with engineering, procurement, and construction activities for the PTF. One of the issues is Technical Issue T1 - Hydrogen Gas Release from Vessels (hereafter referred to as T1). The focus of T1 is identifying controls for hydrogen release and completing any testing required to close the technical issue. In advance of selecting specific controls for hydrogen gas safety, a number of preliminary technical studies were initiated to support anticipated future testing and to improve the understanding of hydrogen gas generation, retention, and release within PTF vessels. These activities supported the development of a plan defining an overall strategy and approach for addressing T1 and achieving technical endpoints identified for T1. Preliminary studies also supported the development of a test plan for conducting testing and analysis to support closing T1. Both of these plans were developed in advance of selecting specific controls, and in the course of working on T1 it was decided that the testing and analysis identified in the test plan were not immediately needed. However, planning activities and preliminary studies led to significant technical progress in a number of areas. This report summarizes the progress to date from the preliminary technical studies. The technical results in this report should not be used for WTP design or safety and hazards analyses and technical results are marked with the following statement: “Preliminary Technical Results for Planning – Not to be used for WTP Design

  17. Clinical utility of color-form naming in Alzheimer's disease: preliminary evidence

    DEFF Research Database (Denmark)

    Nielsen, Niels Peter; Wiig, Elisabeth H; Warkentin, Siegbert

    2004-01-01

    Performances on Alzheimer's Quick Test color-form naming and Mini-Mental State Examination were compared for 38 adults with Alzheimer's disease and 38 age- and sex-matched normal controls. Group means differed significantly and indicated longer naming times by adults with Alzheimer's disease...... associated with Alzheimer's disease, are preliminary given the relatively small sample....

  18. 75 FR 18794 - Certain Orange Juice From Brazil: Preliminary Results of Antidumping Duty Administrative Review...

    Science.gov (United States)

    2010-04-13

    .... Comercio, Industria, and Agricultura (Fischer) and Sucocitrico Cutrale, S.A. (Cutrale). In Cutrale's.... Comercio, Industria, e Agricultura for the Preliminary Results in the 08-09 Antidumping Duty Administrative... Results--Fischer S.A. Comercio, Industria and Agricultura.'' 2. Test of Comparison Market Sales Prices...

  19. [Preliminary screening for antiviral AIDS drugs. VI. Report for fiscal year 1993].

    Science.gov (United States)

    Ushijima, H; Takahashi, K; Kunisada, T; Moritugu, Y; Kobayashi, N; Noguchi, Y; Matsuyama, M; Akiyoshi, K; Noro, S; Sawada, H; Sakurada, N; Yamada, A; Ishizaki, T; Kamimura, N; Yoshida, Y; Ono, T; Ohtomo, N; Morishita, T; Kobayashi, S; Miyake, T; Ishiwara, Y; Suzuki, R; Saito, T; Etoh, S; Mise, K

    1996-01-01

    Preliminary screening of antiviral AIDS drugs has been carried out using three different in vitro assay systems. Among 138 samples tested, two were found to inhibit the growth of HIV in vitro. Neither of the positive samples has hopeful signs, as the ranges of effective doses of the samples are very narrow.

  20. [Preliminary screening for antiviral AIDS drugs. VII. Report for fiscal year 1994].

    Science.gov (United States)

    Ohmuki, N; Kazama, K; Sadamasu, T; Sekine, H; Ohta, K; Kudoh, Y; Kobayashi, N; Noguchi, Y; Matsuyama, M; Akiyoshi, K; Noro, S; Sawada, H; Kimura, H; Yamada, A; Ishizaki, T; Kamimura, N; Yoshida, Y; Ono, T; Tachibana, N; Morishita, T; Kobayashi, S; Miyake, T; Ishiwara, Y; Ishikawa, N; Moritugu, Y

    1996-01-01

    Preliminary screening of antiviral AIDS drugs has been carried out using three different in vitro assay systems. Among 246 samples of different origin tested, six were shown to inhibit the growth of HIV in vitro. Two of the positive samples have hopeful signs, as the ranges of effective doses are wider than those of most of positive samples which had been found by us.