WorldWideScience

Sample records for prefab wooden dwellings

  1. PREFAB QUALITY

    DEFF Research Database (Denmark)

    Wraber, Ida Kristina

    This PhD project is a co-financed project between the Danish Forest and Nature Agency, the single family house producer Hjem, and the Department of Architecture & Design at Aalborg University. The aim of the thesis is to investigate the architectural pros and cons as well as the potential...... dwellings as well as testing and challenging the model for analysis of architectural quality as such. The second analysis should show the pros, cons and potential of building prefab wooden dwellings in Denmark in a wider sense, emphasising different methods of manufacturing and approaches to the degree......, technology and site (common abilities, needs, dreams, memories and associations), and it is proposed that the more layers and perspectives that are added to the discussion, the fuller the view of the architectural quality will get. In relation to building prefab wooden dwellings in a Danish context, two...

  2. Prefab-Interiority

    DEFF Research Database (Denmark)

    Frier, Marie; Fisker, Anna Marie; Kirkegaard, Poul Henning

    2010-01-01

    qualities is significantly dependent on our constructive ability to economically and production-technically join building elements. Consequently this paper explores the potential for developing interiority as a theory and design principle for transforming constructive challenges within prefab practice....../S. As a research result the paper suggests a positioning of interiority as a theory and design principle for developing a sensuous prefab practice......., and practical realm of prefabrication, leaving the produced houses as monotonous box-like constructions rather than inhabitable homes. But what are the sensuous qualities actually spatially defining a home, and how to formulate design principles for developing and revealing these qualities within prefab...

  3. Comparative study of Danish prefab houses made of wood

    DEFF Research Database (Denmark)

    Wraber, Ida Kristina

    2011-01-01

    The use of wood in Danish prefab building projects is increasing, but there is not a strong architectural tradition in Denmark for constructing timber housing. This paper therefore contains a comparative study of various manners of incorporating architectural features in prefab houses made of wood....... In the study four Danish prefab housing concepts based on wood con¬struc¬tion is compared and discussed, in order to investigate and exemplify how it is possible to work with architectural quality in prefab timber housing and maximise the use of the material, the prefab production and the architectural values....... It was concluded that especially two aspects are of great importance for the concrete handling of the architectural quality of prefab houses made of wood; 1) flexibility in relation to user and site, and 2) the interaction between form, logics and material. It is suggested that keeping these two aspects in mind...

  4. A Review of Prefab Home and Relevant Issues

    Directory of Open Access Journals (Sweden)

    Mohammad PANJEHPOUR

    2013-07-01

    Full Text Available Having an easily built house has been always one of human wishes. Prefabricated home makes this wish come true because of its affordability and fast completion. This paper gives an overview of different types of prefab home and its terminology. This review sheds light on the characterisation of prefab home, which takes the aspects of off-site technology, mass customisation, and sustainability into consideration. This paper is confined to general review of prefab home without going through different systems utilised in off-site technology. In spite of the fact that prefab home has many advantages, which are discussed in this review, it suffers from a few drawbacks which should be considered by designers. Various exploitations in this field may merit further research in future, including finding the optimum prefabricated systems among the existing systems such as roof, wall, and floor systems for different applications of prefab homes. Nevertheless, there is still a universal design and practice code for prefab homes that emphasize on green technology and sustainability yet to be discovered.

  5. Communication of architectural design and Prefab-houses.

    Directory of Open Access Journals (Sweden)

    Massimo Ballabeni

    2009-06-01

    Full Text Available The article investigates the relationship between architecture design and its communication, within the study of the prefab-houses, which now are widespread in Europe, as this housing type is characterized by the design research of optimized and innovative residential solutions. The operational experience conducted on case studies of “Prefab-Houses”, offered original ideas because these buildings, while exceptionally compact, share many features with larger buildings. These can be studied for their aggregability, combinatorial possibilities, furniture, the materials used and development of construction details. The communication of the project and its digital representation is particularly important as retailers generally promote these houses through catalogues. Specialized visualisation systems are therfore needed to represent effectively the inner-outer spaces, materials and customizations, with different techniques such as drawings, abstract-photorealistic rendering and animation. The match between case studies and research was considered successful in terms of teaching goals and besides research directions concerning the relationship between design representation means, modeling and 3D digital design communication systems.

  6. Impact sound insulation improvement of wooden floors on concrete slabs

    DEFF Research Database (Denmark)

    Rasmussen, Birgit; Hoffmeyer, Dan; Hansen, Rói

    2014-01-01

    renovating housing. In Denmark, there are about 1 million dwellings in multi-storey housing. About half of the dwellings are built with timber floors, and the other half with wooden floors on concrete slabs, either in-situ cast or prefabricated hollow-core elements. In a project including mapping of sound......Improvement of impact sound insulation is one of the major challenges, when renovating housing. In Denmark, building regulations for impact sound in new-build were strengthened 5 dB in 2008, implying a main requirement L’n,w ≤ 53 dB between dwellings. The same value should also be a goal, when...... insulation in the Danish housing stock and investigation of improvement possibilities, a pilot laboratory study of wooden floors on concrete was carried out. The laboratory study included impact sound improvement measurements of full-scale samples (10 m2) fulfilling the conditions in EN ISO 10140...

  7. Improved Radiography Of Wooden Parts

    Science.gov (United States)

    Berry, Maggie L.; Berry, Robert F., Jr.

    1990-01-01

    Technique developed to increase radiographic contrasts of inherent latent defects in wood. Involves introduction of radiopaque substance into defect site and subjecting site to penetrating radiation. Radiopaque penetrant used is commercially available fluorocarbon cleaning solvent, trichlorotrifluoroethane. Applicable in inspection of wooden aircraft components, fan and wind-turbine blades, marine parts, insulators, and other wooden components, assemblies, and structures.

  8. Current perception of wooden building in Slovenia

    OpenAIRE

    Kitek Kuzman , Manja; Hrovatin, Jasna

    2007-01-01

    In residential buildings, prefabricated wooden houses constitute minor part ofall buildings in Slovenia. The reasons pertaining to the relatively low occurrence of prefabricated wooden buildings today are assessed in the presentstudy. The Slovenian public opinion survey on wooden building 2006 examined, among other issues, public attitude towards wooden buildings and itsadvantages. Data collection was performed by CATI method. Results of publicresearch clearly indicate the users' lack of know...

  9. Intraorbital wooden and bamboo foreign bodies: CT

    International Nuclear Information System (INIS)

    Uchino, A.; Kato, A.; Takase, Y.; Kudo, S.

    1997-01-01

    We describe the CT findings of intraorbital wooden and bamboo foreign bodies in the acute, subacute, and chronic stages. We examined four patients using CT a total of seven times. The CT findings were reviewed. There were three dry wooden foreign bodies. CT within a day of the accident demonstrated wooden foreign bodies as low density relative to surrounding orbital fat, while CT 8-29 days after the accident showed them as denser than the extraocular muscles. In the acute stage, dry wooden foreign bodies mimic air bubbles. Wooden foreign bodies in the subacute and chronic stages should be included in the differential diagnosis of intraorbital lesions of soft tissue density or above on CT of traumatised orbits. There was one dry bamboo foreign body. Within a day of the accident it was recognised as linear lesion isodense with fat. Therefore, such foreign bodies may be missed on CT when located in the orbital fat. (orig.)

  10. Wooden houses in detail. Holzhaeuser im Detail

    Energy Technology Data Exchange (ETDEWEB)

    Ruske, W. (ed.)

    1986-01-01

    Under the serial title 'Planning and construction of wooden houses', WEKA will publish a number of books of which this is the first. Details of design and construction are presented, e.g.: Details of modern one-family houses; Fundamentals of design and hints for planning of wooden houses and compact wooden structures; Constructional ecology, wood protection, thermal insulation, sound insulation; Modular systems for domestic buildings; The 'bookshelf-type' house at the Berlin International Construction Exhibition (IBA); Experience with do-it-yourself systems. With 439 figs.

  11. Dutch Dwellings

    NARCIS (Netherlands)

    Vries, de B.; Zee, van der A.; Carp, J.C.; Soddu, C.

    2004-01-01

    Applying Generative Design (GD) for dwelling is not very common but it opens up the possibility to study whether GD systems can reproduce existing design typologies. Dutch dwellings as an exemplification of a design typology are analysed using the SAR methodology. Building regulations are used as

  12. APPRAISAL OF USED WOODEN RAILWAY SLEEPER

    Directory of Open Access Journals (Sweden)

    SITI HAWA HAMZAH

    2008-12-01

    Full Text Available Replacement of wooden sleepers to prestressed concrete sleepers has marked as advancement in the railway sleepers industry in Malaysia. Despite superiority of these man-made composite sleepers, wooden sleepers still lead in terms of track performance qualities in particular on its natural elasticity. An initiative to investigate the degree of degradation of used wooden sleepers and the possibility of reusing them on low capacity railway track in Malaysia as a means of reducing the overall track rehabilitation cost was undertaken. Used wooden sleepers were tested according to Australian Standard, Railway Track Material, Prestressed Concrete Sleepers (AS 1085:14:2003 on Rail Seat Vertical Load Test and Centre Positive Bending Moment Test. Six wooden sleeper samples were tested under the static load until failure. Benchmarking was carried on high strength prestressed concrete sleeper, tested according to AS 1085:14:2003: Rail Seat - Positive Moment Test. The results obtained showed the maximum load that the used wooden sleepers can carry surpassed the design load of KTMB specifications and it is about 58% of high strength prestressed concrete sleeper.The maximum deflection produced by all used wooden sleepers is 20 mm showing that the sleepers maintained their elastic behaviour. Modulus of Elasticity ranging from 21 to 27 kN/mm2 of which within the standard value, indicating weathering process does not so much affect their stiffness. Most sleepers showed crack patterns propagated in the longitudinal direction. Toughness value is almost one half of the high strength prestressed concrete sleeper. This study indicates that there is a potential of reusing the wooden sleepers for light loading of the railway track. Hence, an extensive study is recommended to be carried out under fatigue loading condition.

  13. Internationalisation of the Malaysian Wooden Furniture Industry

    OpenAIRE

    Zhao, LiXu

    2016-01-01

    Malaysia has a strong market share in wooden furniture and the witnessed fast growth made it a leading furniture exporter. Currently, Malaysia is the 8th largest furniture export country. As an export dominated industry, the wooden furniture industry occupies a significant position in the Malaysian economic development. Since the industry is a challenged and deteriorating in global competition, the research objective is to evaluate the present situation and find out strategies on how to impro...

  14. Wooden Calendar Sticks in Eastern Europe

    Science.gov (United States)

    Koleva, Vesselina; Koleva, Svetlana

    Wooden calendar sticks have preserved an archaic time-keeping tradition, which, during the Middle Ages, was one of the tools for establishing and disseminating Christian chronology and the liturgical calendars of the Western and Eastern Churches. The calendars vary in size and shape, type of signs, and structure of the record. Christian symbols interwoven with signs and pictograms mark days of importance in the ritual and economic year cycle. The wooden calendars are considered one of the proofs of the syncretism between the pagan tradition and Christian rites in folk cultures.

  15. Dwelling Designers

    Science.gov (United States)

    Szekely, George

    2012-01-01

    Children's inventions go far beyond track housing or Ethan Allen furniture; they foreshadow the most innovative ideas in building forms and interior designs. Children improvise with containers and find places in a home that suggest enticing dwellings. A drawer left open becomes a balcony, soap trays become cots, and the space between twin beds…

  16. A wooden calendar from southeastern Bulgaria

    Science.gov (United States)

    Koleva, Vesselina; Georgiev, Iliya

    Wooden calendars are a specific tool for preserving the church calendar in medieval Europe. The Christian symbols are skillfully interwoven with traditional signs, which mark the days of importance for the economic and ritual life in a year. The archaic method of time reckoning has turned into a tool for disseminating and establishing the Christian festival system, and is one of the proofs of the syncretism between the pagan tradition and the new religious ritualism. Bulgarian Christians used such objects until the beginning of the 20th century. The earliest date fixed on a wooden calendar is 1783. These calendars are also called rabosh in Bulgaria. The calendar presented here is based on the Julian (solar) calendar containing the major fixed feasts of the Orthodox Church. It has not been published so far and is kept in a private collection.

  17. Wooden houses: energy savings in construction

    International Nuclear Information System (INIS)

    Gonthier, P.; Guillard, J.

    1983-01-01

    There is a renewed interest in wooden houses in France, and stress is rightly being put on their thermal insulation properties and the low recurrent costs of heating. On the other hand, it is less often realized that there are energy savings that result from the low energy-cost of producing and working with wood and wood-based products. On the basis of analyses and calculations made by one of us in the course of his studies at the E.N.G.R.E.F. (Forestry option), a comparison is made of the quantities of wood products used in various kinds of wooden houses. For each 100 m 2 of living space there are used 11-17 m 3 of sawn timber (some hardwoods but mainly softwoods), 1,4-3,6 m 3 of plywood and 2-6,5 m 3 of particleboard. This corresponds to a consumption of round-wood of 24-34,5 m 3 of saw logs and 3,5-9,8 m 3 of chip-wood and pulp-wood, i.e. 0,3-0,45 m 3 round-wood equivalent per square metre. With the help of American eco-energy data (the only available source), numerical values have been obtained for the energy consumed from harvesting the trees to building the houses. For 100 m 2 of living space in wooden houses, the expenditure of energy is 1,40-2,40 t oil equivalent, according to the type of house. This is 2,5-4 times less than for houses of steel and cement, of comparable cost and comfort. If it is still needed, this tentative eco-energy analysis supplies one more argument in favour of wooden housing. (authors)

  18. Delayed Collapse of Wooden Folding Stairs

    Science.gov (United States)

    Krentowski, Janusz; Chyzy, Tadeusz

    2017-10-01

    During operation of folding stairs, a fastener joining the ladder hanger with the frame was torn off. A person using the stairs sustained serious injury. In several dozen other locations similar accidents were observed. As a result of inspections, some threaded parts of the screws were found in the gaps between the wooden elements of the stairs’ flaps. In the construction a hatch made of wooden strips is attached to an external frame by means of metal hangers. Laboratory strength tests were conducted on three samples made of wooden elements identical to the ones used in the damaged stairs. Due to complex load distribution mechanism acting on the base of the structure, a three-dimensional FEM model was created. An original software was used for calculations. Five computational model variants were considered. As a result of the numerical analyses, it was unquestionably shown that faulty connections were the cause of the destruction of the stairs. The weakest link in the load transmission chain were found to have been the screws connecting the hatch board with the hangers.

  19. WOODEN FLOORING – BETWEEN PRESENT AND FUTURE

    Directory of Open Access Journals (Sweden)

    Ivan CISMARU

    2015-06-01

    Full Text Available The paper aims at presenting a systematization of the wood floors, both in terms of the areas of application, and in terms of the fastening solutions and structures in constructions. In this respect, an extensive bibliographic research was achieved, on the researchers’ preoccupations. Starting from the current situation and forecasting the future, from the point of view of the chances held by wooden flooring, in competition with other types of materials, we dare say the wooden flooring or the wood in combination with other materials are not likely to be eliminated from the “civil-engineering market”. The wood floors are likely to develop as an application, especially in the area of the “special floors”, specific to the indoor sports or social halls; and even for some industrial sectors, with strict operating conditions (elasticity, thermal insulation, soundproofing that cannot be provided by other types of materials or structures. Starting from this last observation, the paper also aims at submitting current opinions with respect to this type of floors, both in the light of the current databases and in the light of the future researches, to this end

  20. 75 FR 80528 - Wooden Bedroom Furniture From China

    Science.gov (United States)

    2010-12-22

    ... furniture from China would be likely to lead to continuation or recurrence of material injury to an industry... INTERNATIONAL TRADE COMMISSION [Investigation No. 731-TA-1058 (Review)] Wooden Bedroom Furniture... Publication 4203 (December 2010), entitled Wooden Bedroom Furniture from China: Investigation No. 731-TA-1058...

  1. THE WOODEN GLUE STRUCTURES OF FOREIGN MODERN PEDESTRIAN BRIDGES

    Directory of Open Access Journals (Sweden)

    E. N. Trach

    2015-02-01

    Full Text Available A brief review on the application of wooden bridges is presented as well as wooden structures of modern pedestrian and road bridges built in recent years in the Western Europe are described. Based upon the review, the conclusions concerning the construction of similar structures in Ukraine are made.

  2. Wooden beverage cases cause little damage to bottle caps

    Science.gov (United States)

    R. Bruce Anderson; William C. Miller

    1973-01-01

    Wooden beverage cases cause little damage to aluminum resealable caps during distribution. A study at bottling plants and distribution warehouses showed that an average of 1 bottle out of 4,000 has cap damage. Most of the damage was attributed to handling at the warehouse and in transit. Some recommendations are given for improvement of wooden beverage cases to prevent...

  3. 77 FR 12437 - Importation of Wooden Handicrafts From China

    Science.gov (United States)

    2012-03-01

    ... phytopathogenic fungi. Phytopathogenic fungi were determined to be likely to follow the pathway on wooden... minimally affected by this rule. Wooden handicrafts comprised a very small fraction of wood products... Collection Coordinator, at (301) 851-2908. List of Subjects in 7 CFR Part 319 Coffee, Cotton, Fruits, Imports...

  4. Hygrothermal performance of ventilated wooden cladding

    Energy Technology Data Exchange (ETDEWEB)

    Nore, Kristine

    2009-10-15

    This project contributes to more accurate design guidelines for high-performance building envelopes by analysis of hygrothermal performance of ventilated wooden cladding. Hygrothermal performance is defined by cladding temperature and moisture conditions, and subsequently by risk of degradation. Wood cladding is the most common facade material used in rural and residential areas in Norway. Historically, wooden cladding design varied in different regions in Norway. This was due to both climatic variations and the logistical distance to materials and craftspeople. The rebuilding of Norwegian houses in the 1950s followed central guidelines where local climate adaptation was often not evaluated. Nowadays we find some technical solutions that do not withstand all climate exposures. The demand for thermal comfort and also energy savings has changed hygrothermal condition of the building envelopes. In well-insulated wall assemblies, the cladding temperature is lower compared to traditional walls. Thus the drying out potential is smaller, and the risk of decay may be higher. The climate change scenario indicates a warmer and wetter future in Norway. Future buildings should be designed to endure harsher climate exposure than at present. Is there a need for refined climate differentiated design guidelines for building enclosures? As part of the Norwegian research programme 'Climate 2000', varieties of wooden claddings have been investigated on a test house in Trondheim. The aim of this investigation was to increase our understanding of the relation between microclimatic conditions and the responding hygrothermal performance of wooden cladding, according to orientation, design of ventilation gap, wood material quality and surface treatment. The two test facades, facing east and west have different climate exposure. Hourly measurements of in total 250 sensors provide meteorological data; temperature, radiation, wind properties, relative humidity, and test house data

  5. The aesthetic interpretation on Wooden Drum Dancing of Wa people

    Directory of Open Access Journals (Sweden)

    Youfeng Wang

    2017-02-01

    Full Text Available The Wa nationality, a typical ethnic group in Yunnan province, is an ancient one lives across Yunnan. The main residences of it are border area beside northern Yunnan and the Wa States in Burma. Among all the Wa dances, Wooden Drum Dancing leads a vital position, and it is also a symbolic dancing in the culture of Wa people. The feature of Wooden Drum Dancing is that every action expending by the beats of wooden drum, namely, first the wooden drum, then the Wooden Drum Dancing. Dancing is an important content in the life of Wa people, and the aesthetics of life comes from dancing, so they present their value on worship by the form of dancing. This article is going to interpret the aesthetic standard on Wa people’s Wooden Drum Dancing by the view of aesthetics, and come into a conclude that the inspiration of such dancing came from practice and their worship to nature and ancestor. The Wooden Drum Dancing displays totally the tough air and solidarity of Wa people, which also presents the fair society of them. The Wooden Drum Dancing is an enriched art that Wa People took from particle life, so dancing of Wa is often classified into the aesthetic area of plain. The information of people’s living situation displayed by Wa dancing also conveys their rich emotions. The sense of beauty within Wooden Drum Dancing will give others a solemn feeling. The formal beauty is displayed by the rhythm of upper part of body, and the power beauty is displayed by the rhythm of the lower part of body.

  6. Wooden floors: part of historical antiseismic building systems

    Directory of Open Access Journals (Sweden)

    F. Laner

    1995-06-01

    Full Text Available The article describes how wooden floors have been used over the centuries as a means of ensuring greater building solidity to ensure against earthquakes or other events that threaten wall stability.

  7. Evaluation of consumers' choice of wooden dining furniture in ...

    African Journals Online (AJOL)

    USER

    2010-05-24

    May 24, 2010 ... the Nigeria furniture industry though operating at abysmal performance has been ... placed the number of major wooden furniture industry in. *Corresponding author. ..... Demand complementarities, retail assortments and the ...

  8. THE BEHAVIOURAL REACTION OF WEANERS TO HANGING TOYS: WOODEN BALL AND AROMATIZED WOODEN BALL – WAY TO REDUCE AGGRESSION AFTER MIXING

    Directory of Open Access Journals (Sweden)

    Jacek NOWICKI

    2008-05-01

    Full Text Available The behaviour of weaners after mixing housed in pens equipped with hanging wooden ball, aromatized with vanilla fluid hanging wooden ball and without enrichment was evaluated. It was found that both enrichments reduced aggression, however the most interesting for weaners was the aromatized wooden ball.

  9. Situations of dwelling

    DEFF Research Database (Denmark)

    Welling, Helen; Duelund Mortensen, Peder; Wiell Nordberg, Lene

    2006-01-01

    This article explores changeable dwellings that offer the possibility of satisfying spontaneous activities and needs arising from today's changing family patterns. It deals with dwellings that provide people with room for development and flexibility - an open framework, which can be adapted to new...

  10. 77 FR 21536 - Wooden Bedroom Furniture From the People's Republic of China: Final Rescission of Antidumping...

    Science.gov (United States)

    2012-04-10

    ..., computer cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as..., wooden side rails for beds, and wooden canopies for beds) and that do not possess the essential character...

  11. 76 FR 7534 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

    Science.gov (United States)

    2011-02-10

    ..., computer cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as... rails for beds, and wooden canopies for beds) and that do not possess the essential character of wooden...

  12. Energy management in wooden industry; Gestao energetica em industrias madeireiras

    Energy Technology Data Exchange (ETDEWEB)

    Cagnon, Jose Angelo; Valarelli, Ivaldo de Domenico; Rodrigues, Ricardo Martini [Universidade Estadual Paulista (UNESP), Bauru, SP (Brazil). Fac. de Engenharia. Dept. de Engenharia Eletrica], Emails: jacagnon@feb.unesp.br, ivaldo@feb.unesp.br, martini@feb.unesp.br

    2006-07-01

    The objective of this work is the use of a methodology developed for the evaluation of the energy performance in wooden plants, aiming the application of a energy management program, for products and processes improvement, observing a reliable technical and economic implementation. (author)

  13. Motion and time study analysis of wooden locally manufactured ...

    African Journals Online (AJOL)

    Studies were carried out on time-and-motion-economy of wooden locally manufactured duplicating machines. Two versions of the machine were used for the study, viz: standard version and semi-mechanized version. Working with both auxiliary and routine operations, the standard duplicator produced printed paper at an ...

  14. Finite element analysis of boron diffusion in wooden Poles

    DEFF Research Database (Denmark)

    Krabbenhøft, Kristian; Hoffmeyer, Preben; Bechgaard, Carl

    2004-01-01

    The problem of describing the migration of dissolved boron in wood is treated with special reference to the commonly used remedial treatment of wooden poles. The governing equations are derived and discussed together with some of the material parameters required. The equations are solved...

  15. The research of glued frame-mounted wooden constructions

    Directory of Open Access Journals (Sweden)

    Muselemov Kh.M.

    2016-11-01

    Full Text Available the authors of this article note that the fast pace and modern construction make qualitatively new demands on building materials and structures. While great attention is paid to the production of glued wooden structures. Such designs on a number of technical and economic indicators are superior to metal and concrete have low component weight, relatively high strength and stiffness with sufficient reliability and durability. At the same time, negative characteristics of the wood (the dependence of the properties from its structure, defects, need for and considerable expense of quality timber, excessive massiveness of the cross-sections, creep under sustained loading, etc. restrict the scope and impair the indicators of glued wooden structures. One of the ways to address these shortcomings and increase techno-economic efficiency – reinforcement of sections of glued wooden structures and elements of steel or fiberglass reinforcement. This can significantly reduce the consumption of wood, reduce Assembly mass, to improve the quality and reliability of wooden structures, working mainly in bending and compression with bending.

  16. A controlled method to flatten warped wooden panels

    NARCIS (Netherlands)

    Van Gerven, G.; Ankersmit, B.; van Duin, P.H.J.C.; Jorissen, A.J.M.; Schellen, H.L.

    2016-01-01

    This article describes the research and subsequent treatment to flatten the warped wooden doors of a seventeenth-century cabinet. The aim was to flatten the veneered panels, in very strict climatic conditions and without lifting any veneer or damaging the surface finish of the exterior. In this

  17. Evaluation of consumers' choice of wooden dining furniture in ...

    African Journals Online (AJOL)

    Evaluation of consumers' choice of wooden dining furniture in Southwestern Nigeria: A market strategy for furniture manufacturers and marketers. ... The study recommended increase use of durable Lesser Used Species (LUS) of trees for producing dining furniture and location of showrooms to target high income earners.

  18. Acoustic classification of dwellings

    DEFF Research Database (Denmark)

    Berardi, Umberto; Rasmussen, Birgit

    2014-01-01

    insulation performance, national schemes for sound classification of dwellings have been developed in several European countries. These schemes define acoustic classes according to different levels of sound insulation. Due to the lack of coordination among countries, a significant diversity in terms...... exchanging experiences about constructions fulfilling different classes, reducing trade barriers, and finally increasing the sound insulation of dwellings.......Schemes for the classification of dwellings according to different building performances have been proposed in the last years worldwide. The general idea behind these schemes relates to the positive impact a higher label, and thus a better performance, should have. In particular, focusing on sound...

  19. From the Paper to the Tablet: On the Design of an AR-Based Tool for the Inspection of Pre-Fab Buildings. Preliminary Results of the SIRAE Project.

    Science.gov (United States)

    Portalés, Cristina; Casas, Sergio; Gimeno, Jesús; Fernández, Marcos; Poza, Montse

    2018-04-19

    Energy-efficient Buildings (EeB) are demanded in today’s constructions, fulfilling the requirements for green cities. Pre-fab buildings, which are modularly fully-built in factories, are a good example of this. Although this kind of building is quite new, the in situ inspection is documented using traditional tools, mainly based on paper annotations. Thus, the inspection process is not taking advantage of new technologies. In this paper, we present the preliminary results of the SIRAE project that aims to provide an Augmented Reality (AR) tool that can seamlessly aid in the regular processes of pre-fab building inspections to detect and eliminate the possible existing quality and energy efficiency deviations. In this regards, we show a description of the current inspection process and how an interactive tool can be designed and adapted to it. Our first results show the design and implementation of our tool, which is highly interactive and involves AR visualizations and 3D data-gathering, allowing the inspectors to quickly manage it without altering the way the inspection process is done. First trials on a real environment show that the tool is promising for massive inspection processes.

  20. From the Paper to the Tablet: On the Design of an AR-Based Tool for the Inspection of Pre-Fab Buildings. Preliminary Results of the SIRAE Project

    Science.gov (United States)

    Fernández, Marcos; Poza, Montse

    2018-01-01

    Energy-efficient Buildings (EeB) are demanded in today’s constructions, fulfilling the requirements for green cities. Pre-fab buildings, which are modularly fully-built in factories, are a good example of this. Although this kind of building is quite new, the in situ inspection is documented using traditional tools, mainly based on paper annotations. Thus, the inspection process is not taking advantage of new technologies. In this paper, we present the preliminary results of the SIRAE project that aims to provide an Augmented Reality (AR) tool that can seamlessly aid in the regular processes of pre-fab building inspections to detect and eliminate the possible existing quality and energy efficiency deviations. In this regards, we show a description of the current inspection process and how an interactive tool can be designed and adapted to it. Our first results show the design and implementation of our tool, which is highly interactive and involves AR visualizations and 3D data-gathering, allowing the inspectors to quickly manage it without altering the way the inspection process is done. First trials on a real environment show that the tool is promising for massive inspection processes. PMID:29671799

  1. Development And Evaluation Of A Prototype Household Wooden Silo

    African Journals Online (AJOL)

    A prototype household wooden silo with 8 kg capacity for storing shelled maize was designed, constructed and evaluated for performance. The structure was rectangular in shape, of total height of 0.6 m and width of 0.3 m, with a conical top inclined at an angle of 30 º with 0.1 m height and 0.3 m width. The silo had a top ...

  2. Gamma radiation in dwellings

    International Nuclear Information System (INIS)

    Mjoenes, L.

    1981-08-01

    A nationwide investigation has been made into the gamma radiation in Swedish dwellings. The measurements were made with small detectors containing thermoluminescent dosimeters. The detectors were sent to the selected participants by mail. 1300 dwellings were included in the investigation. In each dwelling three measurements were made: one detector was placed in the kitchen, one in the living-room and one in the bedroom. The mean annual absorbed tissue dose in dwellings in Sweden was found to be 0.65 mGy (corresponding to an exposition rate of 12 μR/h) when the contribution from cosmic radiation had been subtracted. That represents an annual collective dose of about 4000 mansieverts to the population of Sweden. From a previous investigation we have calculate the mean value for the gamma radiation in Swedish dwellings for 1950 to be 0.4 mGy/a (8μR/h). The reason for the relatively large increase in the mean value is an increased use of building materials on stone, particularly of lightweight concrete based on alum shale, from 1940 to middle 1960s. The production of this type of lightweight concrete was discontinued in 1975 and the use of other stone-based building materials has decreased. The mean value of gamma radiation in Swedish dwellings is therefore expected to decrease slowly in the future if this tendency holds. Sweden has some 3.5 million dwellings. About 10 % of them have mean values of 1 mGy/a (19 μR/h) or more, 0.2 % have 3 mGy/a (57 μR/h) or more and a couple of hundred 5 mGy/a (95 μR/h or more. The mean value for detached houses was found to be 0.43 mGy/a (8 μR/h) and for dwellings in multi-family houses 0.80 mGy/a (15 μR/h). The investigation dwellings have also been classified according to the building materials, the year of construction and the degree of urbanization of the area. (author)

  3. Radon in Norwegian dwellings

    International Nuclear Information System (INIS)

    Strand, T.; Green, B.M.R.; Lomas, P.R.

    1992-01-01

    The results of a large-scale survey of radon concentrations in Norwegian dwellings are reported. Measurements of radon have been made in a total of 7500 dwellings. The dwellings were randomly selected and the number in each municipality is proportional to its population. The measurements were performed using etched track detectors from the National Radiological Protection Board in the UK. One detector was placed in the main bedroom in each dwelling for 6 months. The annual average of radon concentration in Norwegian bedrooms is calculated to be 51 Bq.m -3 . The frequency distribution is approximately log-normal with a geometric mean of 26 Bq.m -3 and about 4% of the bedrooms have concentrations above 200 Bq.m -3 . The radon concentrations are found to be about 40% higher for bedrooms in single-family houses than in blocks of flats and other multifamily houses. In a large proportion of single-family houses the living room and the kitchen are located on the ground floor and the bedrooms on the first floor. An additional factor is that the winters of 1987-1988 and 1988-1989 were much warmer than normal. Taking these factors into account, the average radon concentration in Norwegian dwellings is estimated to be between 55 and 65 Bq.m -3 . (author)

  4. Wooden's pyramid: building a hierarchy of skills for successful communication.

    Science.gov (United States)

    Epner, Daniel E; Baile, Walter F

    2011-01-01

    John Wooden, the legendary college basketball coach, created the "Pyramid of Success", which he constructed from 14 timeless character traits and interpersonal skills that are critical to competitive greatness. Wooden's pyramid is a powerful symbol that he and others have used for several decades as an educational tool to promote leadership and teamwork. This article proposes the "Pyramid of Relational Excellence (PRE)", patterned after Wooden's pyramid, as a mnemonic-based educational symbol for communication skills training. Literature review, personal reflection. The PRE is constructed of four tiers with a total of 12 building blocks, with each successive tier built upon the one beneath it. The building blocks represent fundamental elements that are known to be critical to successful communication. The PRE is process oriented rather than task oriented and focuses exclusively on the face-to-face encounter. It therefore complements established communications curricula, such as the UK communication wheel and others, which are more comprehensive and task oriented. The PRE is constructed of timeless, fundamental principles. It is therefore particularly well suited for training medical students and residents.

  5. Sound Insulation between Dwellings

    DEFF Research Database (Denmark)

    Rasmussen, Birgit

    2011-01-01

    Regulatory sound insulation requirements for dwellings exist in more than 30 countries in Europe. In some countries, requirements have existed since the 1950s. Findings from comparative studies show that sound insulation descriptors and requirements represent a high degree of diversity...... and initiate – where needed – improvement of sound insulation of new and existing dwellings in Europe to the benefit of the inhabitants and the society. A European COST Action TU0901 "Integrating and Harmonizing Sound Insulation Aspects in Sustainable Urban Housing Constructions", has been established and runs...... 2009-2013. The main objectives of TU0901 are to prepare proposals for harmonized sound insulation descriptors and for a European sound classification scheme with a number of quality classes for dwellings. Findings from the studies provide input for the discussions in COST TU0901. Data collected from 24...

  6. Tube-dwelling invertebrates

    NARCIS (Netherlands)

    Hölker, Franz; Vanni, Michael J.; Kuiper, Jan J.; Meile, Christof; Grossart, Hans Peter; Stief, Peter; Adrian, Rita; Lorke, Andreas; Dellwig, Olaf; Brand, Andreas; Hupfer, Michael; Mooij, Wolf M.; Nützmann, Gunnar; Lewandowski, Jörg

    2015-01-01

    There is ample evidence that tube-dwelling invertebrates such as chironomids significantly alter multiple important ecosystem functions, particularly in shallow lakes. Chironomids pump large water volumes, and associated suspended and dissolved substances, through the sediment and thereby compete

  7. Radon in dwellings

    International Nuclear Information System (INIS)

    1987-01-01

    This report gives a review of the present situation in Sweden concerning the knowledge and research on radon in dwellings.The responsibilities and need for actions in this field are examined. Costs and possibilities for financial help to install radonreducing equipment are also treated. (L.E.)

  8. Radon in Norwegian dwellings

    International Nuclear Information System (INIS)

    Strand, T.; Green, B.M.R; Lomas, P.R.; Mangnus, K.; Stranden, E.

    1991-01-01

    Measurements of radon in indoor air have been made in a total of about 7500 randomly selected dwellings in Norway from all parts of the country. The number of selected dwellings in each municipality is about proportional to its population, except for the two largest municipalities, Oslo and Bergen, where somewhat smaller samples were taken due to the higher population density. The measurements were performed by nuclear track detectors from the National Radiological Protection Boards in United Kingdom, and the integration time for the measurements was 6 months. The detectors were spread evenly over all seasons of the year to eliminate influence from seasonal variation in the radon level. One single measurement was performed in each dwelling: in the main bedroom. The results shows that the distribution of radon concentrations in Norwegian bedrooms is log-normal. The aritmetic mean of the measurements, including all categories of dwellings, is calculated to be 51 Bq/m 3 and the corresponding geometric mean to be 26 Bq/m 3 . In a large proportion of single-family houses the living room and the kitchen are located on the ground floor while the bedrooms are located one floor higher. The results of the study shows that the radon level is somewhat higher at the ground floor than on the first floor, and higher in the basement than on the first floor. Taking this into account, and assuming that measurements in bedrooms on the first floor is a representative average for living room and kitchen, the average radon concentration for Norwegian dwellings is estimated to be between 55-65 Bq/m 3 . In this estimate, possible influences of the fact that the winters 87/88 and 88/89 were much warmer than normal and may therefor have lowered the results, has been taken into account. 15 refs., 9 figs., 15 tabs

  9. [Three cases of an intracranial wooden foreign body].

    Science.gov (United States)

    Fujimoto, S; Onuma, T; Amagasa, M; Okudaira, Y

    1987-07-01

    Three cases of intracranial wooden foreign body are reported discussing the diagnostic and therapeutic problems. First case is a 50-year-old man. After drinking, he drove a bike and fell to the ground. On admission the wooden foreign body could not been detected in appearance. CT scan showed low density area similar to air in bilateral anterior horn of lateral ventricle. The patient was treated for traumatic pneumocephalus at first. Later, it proved that he was stabbed with a foreign body penetrating into the contralateral frontal lobe through the left nasal cavity. It was extracted by endonasal approach by otolaryngologist, fortunately without trouble. The foreign body was a branch of tree. The second case is an 18-year-old man. He was driving a car, and suffered injury. He was stabbed with a wooden stake penetrating into his left eye. Immediately, bifrontal craniotomy was performed and the stake was withdrawn carefully. Moreover bone fragments were removed. The third case is a 61-year-old man. When he cut the timber by chain saw, a piece of wood hit and stabbed his right eye directly. Immediately right front temporal craniotomy was performed. The piece of wood was withdrawn from the right eye, and pieces of glass, wood and bone fragments were evacuated. It is difficult to confirm intracranial foreign body accurately by means of only plain skull film and usual CT scans. It is necessary to utilize various function of CT scanner. For example, it is useful to know CT values or select measure mode with window width and level or make reconstruction image to sagittal or coronal section, and so on.(ABSTRACT TRUNCATED AT 250 WORDS)

  10. The politics of spectatorship in the Tree of Wooden Clogs

    Directory of Open Access Journals (Sweden)

    Ian Dwayne Pettigrew

    2017-09-01

    Full Text Available This article reassesses the politics of Ermanno Olmi’s 1978 Palme d’Or winner, The Tree of Wooden Clogs. It specifically addresses charges made against the film by the novelist and critic, Alberto Moravia. The Marxist writer asserted that the film promotes the life and ideology of the farmers featured in the work. By looking closely at the film, I demonstrate how the formal strategies utilized by Olmi negate Moravia’s assessment and controvertibly position spectators to re-evaluate their political relationships to those in their range of influence.

  11. Sound classification of dwellings

    DEFF Research Database (Denmark)

    Rasmussen, Birgit

    2012-01-01

    National schemes for sound classification of dwellings exist in more than ten countries in Europe, typically published as national standards. The schemes define quality classes reflecting different levels of acoustical comfort. Main criteria concern airborne and impact sound insulation between...... dwellings, facade sound insulation and installation noise. The schemes have been developed, implemented and revised gradually since the early 1990s. However, due to lack of coordination between countries, there are significant discrepancies, and new standards and revisions continue to increase the diversity...... is needed, and a European COST Action TU0901 "Integrating and Harmonizing Sound Insulation Aspects in Sustainable Urban Housing Constructions", has been established and runs 2009-2013, one of the main objectives being to prepare a proposal for a European sound classification scheme with a number of quality...

  12. Dwelling with design

    OpenAIRE

    Paavilainen, Heidi

    2013-01-01

    Dwelling with Design offers a throughout look at the domestic meanings of design. The research is based on studying households in and around Helsinki, in order to find out what role, if any, design plays in the domestication of a product. The picture emerging from the research is quite different from design’s public and professional image represented for example in the interior decoration magazines, where designed qualities such as usability, reliability, interesting branding and aesthetic co...

  13. Bio-inspired wooden actuators for large scale applications.

    Directory of Open Access Journals (Sweden)

    Markus Rüggeberg

    Full Text Available Implementing programmable actuation into materials and structures is a major topic in the field of smart materials. In particular the bilayer principle has been employed to develop actuators that respond to various kinds of stimuli. A multitude of small scale applications down to micrometer size have been developed, but up-scaling remains challenging due to either limitations in mechanical stiffness of the material or in the manufacturing processes. Here, we demonstrate the actuation of wooden bilayers in response to changes in relative humidity, making use of the high material stiffness and a good machinability to reach large scale actuation and application. Amplitude and response time of the actuation were measured and can be predicted and controlled by adapting the geometry and the constitution of the bilayers. Field tests in full weathering conditions revealed long-term stability of the actuation. The potential of the concept is shown by a first demonstrator. With the sensor and actuator intrinsically incorporated in the wooden bilayers, the daily change in relative humidity is exploited for an autonomous and solar powered movement of a tracker for solar modules.

  14. Bio-inspired wooden actuators for large scale applications.

    Science.gov (United States)

    Rüggeberg, Markus; Burgert, Ingo

    2015-01-01

    Implementing programmable actuation into materials and structures is a major topic in the field of smart materials. In particular the bilayer principle has been employed to develop actuators that respond to various kinds of stimuli. A multitude of small scale applications down to micrometer size have been developed, but up-scaling remains challenging due to either limitations in mechanical stiffness of the material or in the manufacturing processes. Here, we demonstrate the actuation of wooden bilayers in response to changes in relative humidity, making use of the high material stiffness and a good machinability to reach large scale actuation and application. Amplitude and response time of the actuation were measured and can be predicted and controlled by adapting the geometry and the constitution of the bilayers. Field tests in full weathering conditions revealed long-term stability of the actuation. The potential of the concept is shown by a first demonstrator. With the sensor and actuator intrinsically incorporated in the wooden bilayers, the daily change in relative humidity is exploited for an autonomous and solar powered movement of a tracker for solar modules.

  15. Shipping Service requests all users of wooden pallets

    CERN Multimedia

    2006-01-01

    The Shipping Service requests all users of wooden pallets marked 'EUR' (80x120 cm) or freight containers and lids marked 'CFF SBB FFS', which are subject to a refundable deposit and thus have a logistics exchange value, to make any they are holding available as soon as possible to CERN's Transport Service, which is responsible for collecting and returning them to the Goods Reception Service in Buildings 904 and 194. A large number of EUR pallets and CFF freight containers and lids are used as supports and packing cases for storing various items of equipment in buildings and underground areas. If you are using them for this purpose, please contact the Goods Reception Service who will be able to offer you alternative wooden pallets and containers that are available to cover special needs. The Goods Reception Service regularly needs to stock up on EUR pallets and CFF containers and lids in order to have sufficient available each day to be able to exchange them for those used by various carriers to deliver goo...

  16. Shipping Service calls on all users of wooden pallets

    CERN Multimedia

    2006-01-01

    The Shipping Service requests all users of wooden pallets marked 'EUR' (80x120 cm) or freight containers and lids marked 'CFF SBB FFS', which are subject to a refundable deposit and thus have a logistics exchange value, to make any they are holding available as soon as possible to CERN's Transport Service, which is responsible for collecting and returning them to the Goods Reception Service in Buildings 904 and 194. A large number of EUR pallets and CFF freight containers and lids are used as supports and packing cases for storing various items of equipment in buildings and underground areas. If you are using them for this purpose, please contact the Goods Reception Service, which will be able to offer you alternative wooden pallets and containers that are available to cover special needs. The Goods Reception Service regularly needs to stock up on EUR pallets and CFF containers and lids in order to have sufficient available each day to be able to exchange them for those used by various carriers to deliver g...

  17. Wooden facade decor in the aspect of energy saving

    Directory of Open Access Journals (Sweden)

    Samol'kina Elena Grigor'evna

    2014-09-01

    most common facing materials of natural origin include wooden facades. Demand for such kind of structures in contemporary architecture is explained by wide possibilities of architectural and artistic facades. Facade decor made of wood is various, it tends to be unusual, with exclusive forms, eliminating unnecessary luxury. Valuable wood panels, board with logs imitation, block house, facade boards (planken, the wood tile (shingle, etc. can be used in decoration. A large number of wooden facing materials allow to create wooden facades of different styles, and the texture and wood shades form a harmonious environment. Among the various methods of using wooden decor the most common technique is outplaying of wood texture. Wood is treated with special impregnation to give effect of the natural aging, wood is also tinted, creating a color contrast of house planes, and then is coloured, imitating the texture of precious wood. Wooden facade decor fully solves not only the problem of architectural expressiveness of structures, but also the problem of energy saving, which is especially important in the context of the global crisis. The unique capabilities of the tree, its ability to be in harmony with other materials form a comfortable environment, providing a favorable psychological impact.

  18. 76 FR 9747 - Wooden Bedroom Furniture From the People's Republic of China: Final Results of Antidumping Duty...

    Science.gov (United States)

    2011-02-22

    ..., stand-up desks, computer cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen... wooden canopies for beds) and that do not possess the essential character of wooden bedroom furniture in...

  19. 75 FR 19364 - Wooden Bedroom Furniture From the People's Republic of China: Final Results of Expedited Sunset...

    Science.gov (United States)

    2010-04-14

    ... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... wooden canopies for beds) and that do not possess the essential character of wooden bedroom furniture in...

  20. Failure of wooden sandwich beam reinforced with glass/epoxy faces

    Energy Technology Data Exchange (ETDEWEB)

    Papakaliatakis, G. E.; Zacharopoulos, D. A. [Department of Civil Engineering, Democritus University of Thrace, Xanthi, 67100, Greece gpapakal@civil.duth.gr, dzachar@civil.duth.gr (Greece)

    2015-12-31

    The mechanical properties and the failure of wooden beam strengthened with two faces from glass/epoxy composite and a wooden beam without strengthening was studied. Stresses and deflections on both beams, which are imposed in three point bending loading. On the idealized geometry of the specimens with detailed nonlinear orthotropic analysis was performed with a finite elements program. The failure study of the wooden beams was performed, applying the criterion of Tsai-Hill. The shear strength of the adhesive was taken into account. All the specimens were tested with three point bending loading and the experimental results were compared to those of the theoretical approach with the finite elements analysis. Comparing the results, the advantage of strengthened wooden beam against the simple wooden beam becomes obvious. Theoretical predictions were in good agreement with experimental results.

  1. Estimation of historical earthquake intensities and intensity-PGA relationship for wooden house damages

    International Nuclear Information System (INIS)

    Choi, In-Kil; Seo, Jeong-Moon

    2002-01-01

    A series of tests and dynamic analyses on Korean traditional wooden houses was performed for the intensity estimation of the typical large historical earthquake records. Static and cyclic lateral load tests on the wooden frames were performed to assess the lateral load capacity of wooden frames. The shaking table tests on two 1:4 scaled models of a Korean ancient commoner's house made of fresh pine lumber were performed. Typical earthquake time histories recorded on soil and rock sites were used as input for the tests. The prototypical wooden house was analyzed for multiple time histories which match Ohsaki's ground response spectra. Seismic analyses comprise the aging of lumber and different soil condition. The relationship between the earthquake intensity and the peak ground acceleration (PGA) is proposed for the wooden house damages based on the results of this study. The intensity of major Korean historical earthquake records related with house collapses was quantitatively estimated to be MM VIII

  2. Obtaining alcohol from wooden waste of industry using an electron beam accelerator

    International Nuclear Information System (INIS)

    Naranjo, Rodrigo; Vallejo, Luz

    2004-01-01

    The present study refers to the application of a pre-treatment with electron beams to wooden powder to increase the cellulose conversion percentage in sugars during the acid hydrolysis processing and then getting alcohol by fermentation. The physical and chemical characterization of wooden powder was carried out, getting 66.39% cellulose, 3.1% wax and grease, 23.45% lignin, 6.18% pentosanes, 10.18% humidity, 0.89% ashes and the diameter of average particle equal to 11.56 mm. To irradiate wooden waste, an electron beam accelerator ELU 6U was used as a ionizing radiation source. It is installed in the Escuela Politecnica Nacional in Quito, Ecuador. Fermentation tests of hydrolyzed of irradiated wooden powder were done to determine the production of ethylic alcohol. The efficiency was 160 liters of ethanol to 100% from one ton of wooden waste, 66,4% cellulose. (The author)

  3. 25 CFR 700.53 - Dwelling, replacement.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Dwelling, replacement. 700.53 Section 700.53 Indians THE... Policies and Instructions Definitions § 700.53 Dwelling, replacement. The term replacement dwelling means a dwelling selected by the head of a household as a replacement dwelling that meets the criteria of this...

  4. Pipelines programming paradigms: Prefab plumbing

    International Nuclear Information System (INIS)

    Boeheim, C.

    1991-08-01

    Mastery of CMS Pipelines is a process of learning increasingly sophisticated tools and techniques that can be applied to your problem. This paper presents a compilation of techniques that can be used as a reference for solving similar problems

  5. INTERIORITY - a prefab case study

    DEFF Research Database (Denmark)

    Hvejsel, Marie Frier

    Dealing with the general theme of domestic architectural quality, the PhD thesis ‘INTERIORITY’ takes its point of departure in the continuous and increasing need to improve our capability as architects to theoretically articulate the intangible concept of quality, and to reveal it through an active...... been motivated by the particular hypothesis that an introduction of the notion of interiority, as an ability of the spatial envelope itself to address the sensuous scale of furniture, unfolds a particular dual critical potential signifying our experience of domestic architectural quality: On the one......, tectonically. Hence, it has been a particular idea of the study to explore the relation between furniture, the spatial envelope itself, and its construct by using furniture as an architectural concept. Consequently, the thesis has specifically investigated whether this notion of interiority, describing...

  6. HOMO (PRE FABER / Homo (prefaber

    Directory of Open Access Journals (Sweden)

    Miguel Ángel de la Cova Morillo-Velarde

    2012-05-01

    Full Text Available RESUMEN En el presente número de la Revista PpA, dedicado a la vivienda prefabricada, se entrelazan dos de los campos de investigación de la arquitectura más efervescentes del último siglo: técnica y habitar. Industrialización, estandarización, modulación y seriación se confunden con el concepto de prefabricación como finas capas de un hojaldre difíciles de separar, horneadas bajo un mismo fuego que no es otro que el de responder a través de la producción reglada al alojamiento. En todos estos términos, el valor de la técnica, donde la figura del artesano aún permite pensar en una respuesta específica para cada producto, virará hacia el de la tecnología, dificultando incluir el hecho particular dentro del proceso creativo. Esta confrontación entre objetividad y contingencia adquiere mayor relevancia en el caso de la vivienda prefabricada, por la distancia especulativa que implica la ultimación del diseño previo a su construcción. La actual proliferación de soluciones predefinidas a la hora de enfrentarse al proyecto arquitectónico –principalmente en aspectos constructivos– y el aumento de la producción prefabricada de viviendas a nivel mundial requieren una reflexión disciplinar en la materia, que hilvane relaciones intencionadas entre hombre y producto. SUMMARY This issue of PPA is dedicated to the prefabricated home, and intertwines two of the most lively research areas in architecture over the last century: craftsmanship and living. Industrialization, standardization, modularization and serial production become blended with the concept of prefabrication as thin layers of puff pastry, difficult to separate, baked under the same fire which is nothing more than responding to accommodation needs through regulated production. In all these terms, the value of craftsmanship, where the artisan is still allowed to think of a specific response for each product, will veer towards that of technology, making the inclusion of that response in the creative process more difficult. This confrontation between objectivity and contingency becomes more important in the case of the prefabricated home, due to the speculative distance involved in the finalization of the design, prior to its construction. The current proliferation of predefined solutions that are available for tackling the architectural project, mainly in construction aspects, and the increased prefabricated production of homes worldwide require a disciplinary reflection on the subject, which tacks together the intended relationships between man and product.

  7. System for manufacturing wooden rotor blades for small wind mills

    Energy Technology Data Exchange (ETDEWEB)

    Moeller, B

    1991-05-01

    Acknowledging the need (also in developing countries) for small windmill wings with various patterns and aerodynamic characteristics a simple, low-cost hand-controlled copying milling machine was built (with standard parts) to reduce production time for one wing to 1-2 hours. A sensor-roll transfers the airfoil pattern to a set of two saw blades, driven by an electric motor, which carves the airfoil out of a wooden beam. It is thus possible to cut out each cross section of the wing and manufacture a constantly reproducible rotor blade. The hard-foam airfoil models - their shapes, material and production, the laminated beam - the preparation of the wood and the lamination, and the copying milling machine itself - its design and how to build, operate and maintain it, are described in detail. (AB)

  8. Toxicity research of boron-nitrogen modifiers of wooden surface

    Directory of Open Access Journals (Sweden)

    Klyachenkova Ol'ga Aleksandrovna

    2014-07-01

    Full Text Available Boron-nitrogen compounds (BNC have been successfully used to create bio- and fire-protective compositions for wood. Within the framework of this study, our aim was to assess the toxicity of the boron-nitrogen compounds by bioluminescent method with the use of environmental control device "Biotox-10M" and highly sensitive biosensor "Ecolum". We also defined toxicological parameters EC20 and EC50 and concluded, that all the wood preservation compounds are highly toxic, whereby, it is advisable to use them for external protection of wooden structures. As a result of BNC toxicity assessment, it is necessary to consider that any effective bio- and fireprotectives, will be highly toxic. Our researches stated, that BNC protective compositions are highly toxic and, therefore, it is possible to conclude their applicability for external wood processing.

  9. Fire performance of multi-storey wooden facades

    Directory of Open Access Journals (Sweden)

    Östman Birgit A.-L.

    2013-11-01

    Full Text Available Two series of full scale fire tests of wooden facades according to the Swedish test SP Fire 105 are presented, one series for different shares of untreated wood (partial wood and structural fire protection with a fire shield above the window and another series for fire retardant treated, FRT, wood. The results are compared with data from the Single Burning Item test and the cone calorimeter. For FRT wood, the need for verification of the weather durability of the treatment is stressed and a new European technical specification CEN/TS 15912 presented. The need to use fire stops behind multi-storey façade claddings to avoid fire spread in the cavities is underlined and the possibilities of fire safety design with sprinklers is briefly presented.

  10. Solar low energy dwellings

    International Nuclear Information System (INIS)

    Hestnes, Anne Grete

    2000-01-01

    By now, a lot has been learnt about how to reduce energy use in dwellings using solar and low energy technologies, and many good examples can be found throughout Europe. Still, they are not quite the common feature we would expect them to be, i.e. they have not really penetrated the market. The reason for this is in part a result of the fact that the designers and developers of these buildings have not looked at what the market wants and needs, but rather at how to use a set of given technologies. The buildings are the result of a technology push rather than a market pull and have therefore, often, been detached or semidetached dwellings with different solar technologies added on in less than optimal ways. In order to increase market penetration, it is time to look at the market trends and relate to these. Fortunately, quite a few European architects have realized this and have started designing somewhat different residential buildings. The paper focuses on examples of the new trends in solar residential architecture and by that, hopefully, it shows that we are on the right track. (au)

  11. Modelling of Attentional Dwell Time

    DEFF Research Database (Denmark)

    Petersen, Anders; Kyllingsbæk, Søren; Bundesen, Claus

    2009-01-01

    . This confinement of attentional resources leads to the impairment in identifying the second target. With the model, we are able to produce close fits to data from the traditional two target dwell time paradigm. A dwell-time experiment with three targets has also been carried out for individual subjects...... and the model has been extended to fit these data....

  12. Radon and thoron concentrations in offices and dwellings of the Gunma prefecture, Japan

    International Nuclear Information System (INIS)

    Sugino, M.; Tokonami, S.; Zhuo, W.

    2005-01-01

    A one year survey of indoor radon and thoron concentrations was carried out in offices and dwellings of the Gunma prefecture, Japan. A passive integrating radon and thoron discriminative monitor was used in the survey. The annual mean radon concentration was 22±14 Bq x m -3 , and ranged from 12 to 93 Bq x m -3 among the 56 surveyed rooms. Radon concentration in offices was generally higher than that in the dwellings, with the arithmetic averages of 29 and 17 Bq x m -3 , respectively. Radon concentrations were generally lower in the traditional Japanese wooden houses than those houses built with other building materials. Seasonal variation of indoor radon was also observed in this survey. Compared to summer and autumn, radon concentrations were generally higher in spring and winter. The mean value of thoron to radon ratio was estimated to be 1.3, higher values were observed in the dwellings than in the offices. The annual effective dose from the exposure to indoor radon was estimated to be 0.47 mSv after taking the occupancy factors of offices and dwellings into account. (author)

  13. Radon daughter concentrations in and around dwellings in the northern part of the Netherlands

    International Nuclear Information System (INIS)

    Wolfs, F.; Hofstede, H.; Meijer, R.J. de; Put, L.W.

    1984-01-01

    The concentration of radon daughters in and around 80 dwellings located in the northern part of the Netherlands has been determined using a one-filter method. Median values of 2.0 and 0.4 mWL were measured for the indoor and outdoor concentrations, respectively. The average outdoor concentration was about an order of magnitude higher for wind directions between SE-SW than for SW-NW. On average, dwellings with double pane windows and/or concrete floors were found to have significantly higher radon concentrations than those with single pane windows and/or wooden floors. For the living room of a particular dwelling, 18 measurements were carried out. The data for this dwelling indicate a linear relation between the concentration indoors and outdoors with a slope of 3.8 +- 2.0. This unexpected behaviour is thought to be related to ventilation via the crawl space. Measurements of ventilation patterns and measurements of radon concentrations in the living room and the crawl space are consistent with this picture. (author)

  14. Radon studies in Indian dwellings

    International Nuclear Information System (INIS)

    Khan, A.J.

    2000-01-01

    The indoor radon ( 222 Rn) concentration has been measured by Solid State Nuclear Track Detectors (SSNTDs) in large number of Indian dwellings. Radon concentrations were measured in different parts of the country. In the first study, radon concentrations were measured in 143 dwellings of Udaipur, Bikaner and Banswara towns of Rajasthan province. The distributions of the time-averaged indoor radon concentration in these three towns of the Rajasthan fit an approximately log normal distribution. The geometric mean (GM) values of radon concentrations in these three places were found to be 74 Bq m -3 , 46 Bq m -3 and 66 Bq m -3 with a geometric standard deviation (GSD) of 2.2, 2.2 and 2.5 respectively. In another study, radon concentrations were measured in about 150 dwellings of hilly regions of the country. The measurements were carried out in Kohima (Nagaland), Baijnath and Palampur (Himachal Pradesh). The distribution of radon concentration in Kohima dwellings was found to be approximately log normal, however, the radon distribution in Baijnath and Palampur dwellings seems to be bimodal. The GM values of the radon concentrations for 65 dwellings in Kohima and 43 dwellings in Baijnath and Palampur were 88 Bq m -3 and 134 Bq m -3 with GSD of 1.7 and 2.5 respectively. The results are discussed in detail. (author)

  15. Changes in CT density-measurement of intraorbital wooden foreign bodies

    International Nuclear Information System (INIS)

    Otani, Etsuko; Hiyama, Fusako; Machi, Setsuko; Hagihara, Masahiro.

    1991-01-01

    We examined in vitro changes in CT density-measurement of intraorbital wooden foreign bodies. Dry wooden sticks were immersed in distilled water, saline, and serum. Computerized tomography scans were taken several times during 22 weeks. Scans were taken in room air and in fatty tissue. The CT density-measurement of the central part of the wooden bodies was calculated. That of the dry wood was about 500 HU; all of the wooden foreign bodies became denser during the 22 weeks, with those immersed in distilled water and saline at about 130 HU, and those immersed in serum at about 150 HU. It was confirmed that wood becomes denser after soaking in aqueous environments. The CT density of wood soaked in water depends on the density of wood fiber, and the CT density of the wood fiber itself. (author)

  16. 77 FR 1456 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Rescission of...

    Science.gov (United States)

    2012-01-10

    ... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs...) and that do not possess the essential character of wooden bedroom furniture in an unassembled...

  17. 75 FR 72794 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

    Science.gov (United States)

    2010-11-26

    ... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs... essential character of wooden bedroom furniture in an unassembled, incomplete, or unfinished form. Such...

  18. 75 FR 5952 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

    Science.gov (United States)

    2010-02-05

    ... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs... essential character of wooden bedroom furniture in an unassembled, incomplete, or unfinished form. Such...

  19. 76 FR 65684 - Wooden Bedroom Furniture From the People's Republic of China: Preliminary Results of Antidumping...

    Science.gov (United States)

    2011-10-24

    ... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

  20. Transorbital impalement by a wooden stick in a 3-year-old child

    DEFF Research Database (Denmark)

    Damm, Anders; Lauritsen, Anne Øberg; Klemp, Kristian

    2015-01-01

    We present a case of a 3-year-old girl with a transorbital impalement injury due to a wooden stick penetrating the lower inferior palpebra and progressing through the orbita, after the child jumped from a table and hit a wooden basket containing pieces of exposed stick. CT revealed the stick prog...... and discharged 2 days later. Follow-up examination 2 months after the trauma demonstrated normal visual acuity and ocular motility, with no diplopia, tearing or pain....

  1. 12 CFR 541.10 - Dwelling unit.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Dwelling unit. 541.10 Section 541.10 Banks and... FEDERAL SAVINGS ASSOCIATIONS § 541.10 Dwelling unit. The term dwelling unit means the unified combination of rooms designed for residential use by one family, other than a single-family dwelling. ...

  2. 7 CFR 3550.106 - Dwelling requirements.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Dwelling requirements. 3550.106 Section 3550.106... Waste Disposal Grants § 3550.106 Dwelling requirements. (a) Modest dwelling. The property must be one... § 3550.63. (b) Post-repair condition. Dwellings repaired with section 504 funds need not be brought to...

  3. Development and commercialisation of rechargeable wooden LED lamps

    Directory of Open Access Journals (Sweden)

    Bradley Schultz

    2013-02-01

    Full Text Available The focus of this project was to work with local staff at Kathmandu Alternative Power and Energy Group to commercialise a product which would generate recurring income for the organisation, to enable staff to learn the process of commercialisation and to provide employment and skills in the local community. Rechargeable Light Emitting Diode (LED lamps were deemed suitable for these aims, as they are a simple product, yet one that is urgently required in Nepal due to the prevalence of ‘load-shedding’ – scheduled electrical blackouts. After reviewing the market, it was found that it would be impossible to compete with the price of cheap imported Chinese rechargeable LED lamps, so an alternative approach was taken. This involved sourcing wooden off-cuts from a local furniture factory and transforming them into attractive desk lamps, with the target market being affluent Nepalis, ex-pats living in Nepal and tourists. Successful initial sales were achieved through a Kathmandu-based ex-pat email group, hotel-markets and souvenir stores. KAPEG staff have continued the project, producing variations on the initial design including Himalayan rock salt lamps, employing local people to manufacture lamps and selling them at markets in Kathmandu. Staffing and marketing challenges remain to ensure the lamp manufacture and sales continue.

  4. Spectroscopic study of an icon painted on wooden panel

    Directory of Open Access Journals (Sweden)

    Stojanović Sofija R.

    2015-01-01

    Full Text Available Russian icon painted on wooden panel analyzed in this work is interesting for art historians because there is no precise information in which workshops it was made or who the author was. Similar icons are often found in churches and monasteries in our region. In order to obtain information about materials used for creation of investigated icon two micro-analytical techniques were used: Energy-Dispersive X-Ray Fluorescence spectroscopy (EDXRF and micro-Raman spectroscopy. Obtained results confirmed presence of following materials: lead-white, vermilion, minium, ultramarine, brown and green earth pigments and silver in combination with yellow organic varnish, which served to an iconographer for gilding. Ground layer was made of calcite. Blue pigment ultramarine was probably used for blue colour as well as for obtaining particulars hues in several parts of the paint layer. This can be important information for further research concerning particular workshop in which the icon was made. Identified materials are typical for Russian iconography of the 19th century. [Projekat Ministarstva nauke Republike Srbije, br. OI 177021 i OI 177012

  5. Practicing the Attentional Dwell Away?

    DEFF Research Database (Denmark)

    Petersen, Anders; Kyllingsbæk, Søren; Bundesen, Claus

    2007-01-01

    Studies of the time course of visual attention have identified a temporary functional blindness to the second of two spatially separated targets: attending to one visual stimulus may lead to impairments in identifying a second stimulus presented about 200-500 ms later than the first. The phenomenon...... is known as the attentional dwell time (e.g. Duncan, Ward, Shapiro, 1994). Previous studies of attentional dwell time have all used naive subjects running few (.... The results suggest that the majority of subjects may learn to optimize their performance reducing the attentional dwell time effect substantially. Further, the reduction in the attentional dwell time effect seems to be closely linked to the ability of the subject to inhibit eye movements while performing...

  6. Radon in dwellings in Sweden

    International Nuclear Information System (INIS)

    Swedjemark, G.A.

    1980-01-01

    Studies on specific activities in building materials, gamma-radiation levels in dwellings, the concentrations of radon and daughters in the air indoors and the concentration of radon in tap water are in progress in Sweden. On the basis of these investigations and of the investigation of Hultqvist from the beginning of the 1950's, an attempt has been made to show how the radiation doses in dwellings have changed or may be changed by human activities and what these changes imply in terms of collective dose. The annual collective absorbed dose in the basal cells of the critical bronchial region have increased from 11 x 10 3 man-Gy for the occupants of dwellings existing in 1950 to 25 x 10 3 man-Gy for dwellings existing in 1975

  7. Radon in dwellings in Sweden

    International Nuclear Information System (INIS)

    Swedjemark, G.A.

    1978-04-01

    Studies on the specific activities in building materials, the γ-radiation levels in dwellings, the concentrations of radon and daughters in the air indoors and the concentration of radon in tap water are in progress in Sweden. On basis of these investigations and of the investigation of Hultqvist from the beginning of the 1950s, an attempt has been made to show how the radiation doses in dwellings have changed or may be changed by human activities and what these changes imply in terms of collective dose. The annual collective absorbed dose in the basal cells of the critical bronchial region have increased from 11 . 10 3 manGy for the occupants of dwellings existing in 1950 to 25 . 10 3 manGy for dwellings existing in 1975. If the building of houses continues as at present it can be estimated that the annual collective dose will be between 25 and 31 . 10 3 manGy for the dwellings of 1985. (author)

  8. Deformations of temporary wooden supports used to reduce building deflections in mining areas

    Science.gov (United States)

    Gromysz, Krzysztof

    2018-04-01

    Temporary supports, consisting of a stack of wooden elements and a hydraulic jack, are used in the process of removing deflections in buildings with one to three aboveground floors in mining areas. During uneven raising, the supports are loaded monotonically, unloaded and loaded cyclically. Laboratory tests were designed for the supports. For the investigated range of loads of 0 to 400 kN, under a growing load, a linear relationship exists between a load and the change in the stack length, which signifies that the deformations of wooden elements and displacements related to their mutual interactions increase proportionally. A seemingly higher stack stiffness is seen at the beginning of the unloading process and for cyclical loads, meaning that in this phase of loading, the material deformation of the wooden elements and the jack is responsible for changing the jack length in this load phase, with a negligible presence of mutual displacements of wooden elements. The support, after being unloaded, returns to the initial position and its permanent deformations are not observed. The stiffness of a temporary support decreases as the height of the stack of wooden elements increases.

  9. Assessing Ecotourism Potential of Traditional Wooden Architecture in Rural Areas: The Case of Papart Valley

    Directory of Open Access Journals (Sweden)

    Taner Okan

    2016-09-01

    Full Text Available The aim of this study is to reveal the resource values that the rural areas host, and with a very disciplined approach, to discuss opportunities to benefit from those values in terms of ecotourism practices specific to Papart Valley. As a first step in this study, we took an inventory of natural and cultural assets of Papart Valley in Eastern Black Sea Region, Artvin province. Then, a Strengths, Weaknesses, Opportunities and Threats (SWOT analysis was conducted with the participation of all stakeholders and the current situation was analyzed in terms of ecotourism practices. In light of SWOT results, along with observed natural resource assets in the region, the traditional wooden houses were seen to have potential in terms of ecotourism and it was detected that there were a large number of wooden homes and home plans suitable for both the settlement of the local people and accommodation of guests. On the other hand, it was determined that there was a lack of information for sufficient protection and care of wooden houses, and despite their potential, there was a lack of regulations and positive attitudes towards accomodation businesses in traditional wooden houses. In order to eliminate these deficiencies, proposals for the protection of traditional building stock were developed, by first determining the causes of material degradation in the wooden houses. Also, to emphasize the worth and importance of these structures, dendrochronology studies were conducted in order to determine the antiquity of the structures and potentially to make them more attractive for eco-tourism.

  10. NEW WAYS TO DEVELOP AND PPROMOT TOURISM THROUGH RESTORATION OF WOODEN CHURCHES FROM BUZAU REGION

    Directory of Open Access Journals (Sweden)

    Elena-Teodora, NECULA

    2014-11-01

    Full Text Available With highlighting of the wooden churches from the sub-Carpathian region is possible to make projects of development and promovation of tourism in Buzau. Publishing a book of the wooden churches witch presents the overview on architecture helps with the prom ovation of tourism by bringing new light on the full set, geographical specking it brings new territory to view. Advantage by placing wooden churches in the vicinity of hermitage caves from Buzau will attract even more interest of the large public for seed region. Realizing a few projects of conservation-restoration of wooden churches which are declared historical monuments, will bring a local developing from a cultural-tourist view. A particular case is the wooden church "Saints Emperors" from the vicinity city Nehoiu which has ruttier access, helps with the cost for restoration and number of viewers. Through realizing interventions of conservation-restoration and placing it in a favorable aesthetic view, the monument can be used in a cultural-tourist circuit of international important and this way it can help with the growth of value of monuments and developing cultural-tourist with the final scope heightening the economy.

  11. Deformations of temporary wooden supports used to reduce building deflections in mining areas

    Directory of Open Access Journals (Sweden)

    Gromysz Krzysztof

    2018-01-01

    Full Text Available Temporary supports, consisting of a stack of wooden elements and a hydraulic jack, are used in the process of removing deflections in buildings with one to three aboveground floors in mining areas. During uneven raising, the supports are loaded monotonically, unloaded and loaded cyclically. Laboratory tests were designed for the supports. For the investigated range of loads of 0 to 400 kN, under a growing load, a linear relationship exists between a load and the change in the stack length, which signifies that the deformations of wooden elements and displacements related to their mutual interactions increase proportionally. A seemingly higher stack stiffness is seen at the beginning of the unloading process and for cyclical loads, meaning that in this phase of loading, the material deformation of the wooden elements and the jack is responsible for changing the jack length in this load phase, with a negligible presence of mutual displacements of wooden elements. The support, after being unloaded, returns to the initial position and its permanent deformations are not observed. The stiffness of a temporary support decreases as the height of the stack of wooden elements increases.

  12. PUPILS’ AND STUDENTS’ PERCEPTIONS AND REPRESENTATIONS OF THE WOODEN CHURCHES IN MARAMUREŞ, ROMANIA

    Directory of Open Access Journals (Sweden)

    SORIN-ALIN KOSINSZKI

    2013-01-01

    Full Text Available The main objective of the research was to study the perceptions and representations of some pupils and students, living in Maramureş, of the wooden churches from Maramureş and their employment as tourist attractions. The specific objectives of this research were the following: conceiving, analysing and applying a research instrument for the perceptions and representations on the wooden churches from Maramureş and their employment as tourist attractions, the analysis and interpretation of the obtained results. The following research hypothesis was tested: pupils and students do not have very precise representations of the wooden churches in Maramureş and their employment as tourist attractions. After the questionnaire was applied and the results were analyzed, the working hypothesis was confirmed.

  13. Design, Production, and Installation of Wooden Walls for the Japan Pavilion at Expo 2015

    Directory of Open Access Journals (Sweden)

    Matteo Cipollini

    2016-10-01

    Full Text Available This article illustrates the production process, the structural calculations and the assembly phases of the wooden walls of the Japan Pavilion at Expo 2015 in Milan, designed by Atsushi Kitagawara Architects (AKA. The pavilion, one of the most popular construction of this international event, was built almost exclusively with precast interlocking. The production process and the assembly phases were optimized to construct the wooden walls (with a height of 4–12 m in a short time frame and with a high level of quality. Out-of-plane rocking and other aspects of structural safety were considered, to ensure sufficient stability of the walls.

  14. A new approach of the design process for replacing wooden parts of furniture

    Directory of Open Access Journals (Sweden)

    Ciupan Cornel

    2017-01-01

    Full Text Available Based on different design processes for innovative products, the paper presents a new approach of the process. The new method studies the problem of replacing the wooden components of the resistance structure of furniture with other materials. This is a reverse engineering process, that starts with the entire component, following a series of steps to the part drawings, ready for manufacturing. The method was validated by redesigning some parts of the upholstered products manufactured by TAPARO Company, by replacing the wooden parts of the resistance structure of sofas with composite material.

  15. 7 CFR 3550.57 - Dwelling requirements.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Dwelling requirements. 3550.57 Section 3550.57... AGRICULTURE DIRECT SINGLE FAMILY HOUSING LOANS AND GRANTS Section 502 Origination § 3550.57 Dwelling requirements. (a) Modest dwelling. The property must be one that is considered modest for the area, must not be...

  16. Raising the energy performance of historical dwellings

    NARCIS (Netherlands)

    van Krugten, L.T.F.; Hermans, L.M.C.; Havinga, L.C.; Pereira Roders, A.R.; Schellen, H.L.

    2016-01-01

    Purpose: Earlier studies assume that historical dwellings and post-war dwellings in particular, are less sustainable than modern dwellings, justifying its demolition. Over time, historical buildings have been transformed and their energy performance improved. However, there is little known on the

  17. Dwelling towers of Czech castles

    Czech Academy of Sciences Publication Activity Database

    Durdík, Tomáš

    2009-01-01

    Roč. 63, - (2009), s. 139-150 ISSN 1875-2896. [Meeting of Europa Nostra Scientific Council /44./. Kilkenny, 27.09.2008-02.10.2008] Institutional research plan: CEZ:AV0Z80020508 Keywords : castle * castellology * dwelling tower * donjon * keep * medieval archaeology * architecture * Bohemia * Middle Ages Subject RIV: AC - Archeology, Anthropology, Ethnology

  18. Particle transport in urban dwellings

    International Nuclear Information System (INIS)

    Cannell, R.J.; Goddard, A.J.H.; ApSimon, H.M.

    1988-01-01

    A quantitative investigation of the potential for contamination of a dwelling by material carried in on the occupants' footwear has been completed. Data are now available on the transport capacity of different footwear for a small range of particle sizes and contamination source strengths. Additional information is also given on the rate of redistribution

  19. Conservation of mining and metallurgic arachaeologic wooden objects by impregnation and radiation curing

    International Nuclear Information System (INIS)

    Schaudy, R.; Slais, E.; Eibner, C.

    1983-05-01

    The conservation of mining and metallurgic archaeologic wooden objects of different grade of destruction by impregnation with radiation-curable impregnating agents followed by in-situ-curing with gamma rays is described. Dry objects have been consolidated after cautious cleaning, whereas wet findings had to be freezedried first. The results are discussed. (Author) [de

  20. Nonlinear dynamics and modelling of various wooden toys with impact and friction

    NARCIS (Netherlands)

    Leine, R.I.; Campen, van D.H.; Glocker, C.

    2003-01-01

    In this paper, we study bifurcations in systems with impact and friction, modeled with a rigid multibody approach. Knowledge from the field of nonlinear dynamics is therefore combined with theory from the field of non-smooth mechanics. We study the nonlinear dynamics of three commercial wooden toys.

  1. Learning Based on the Project Entitled "Design and Construction of a Wooden Bridge"

    Science.gov (United States)

    Barris, Cristina; Torres, Lluís; Simon, Enric

    2016-01-01

    This article presents the results of a case involving the application of project-based learning carried out with students in the Mechanical Engineering degree program at the University of Girona. The project, entitled "Design and construction of a wooden bridge", was conducted at the Polytechnic School in the third-year Structures…

  2. Machine driving of wooden and steel highway guardrail posts under adverse conditions

    Science.gov (United States)

    Charles J. Gatchell; Edwin L. Lucas; Edwin L. Lucas

    1971-01-01

    In an exploratory study, we drove 32 wooden posts and 26 steel posts into a rock-filled base that was topped with limestone gravel and shale. We found that, though both post materials perform well, wood is superior to steel in resisting damage below the groundline.

  3. 78 FR 60844 - Wooden Bedroom Furniture From the People's Republic of China: Partial Rescission of Antidumping...

    Science.gov (United States)

    2013-10-02

    ... Furniture Co., Ltd. Dorbest Ltd., Rui Feng Woodwork Co., Ltd. Aka Rui Feng Woodwork (Dongguan) Co., Ltd., Rui Feng Lumber Development Co., Ltd. Aka Rui Feng Lumber Development (Shenzhen) Co., Ltd., Fine... Fung Wooden Factory, Sun Fung Co., Shin Feng Furniture Co., Ltd., Stupendous International Co., Ltd...

  4. The Potential of Computer Controlled Optimizing Equipment in the Wooden Furniture Industry

    Science.gov (United States)

    R. Edward Thomas; Urs Buehlmann; Urs Buehlmann

    2003-01-01

    The goal of the wooden furniture industry is to convert lumber into parts by using the most efficient and cost effective processing methods. The key steps in processing lumber arc removing the regions that contain unacceptable defects or character marks and cutting the remaining areas to the widths and lengths of needed parts. Such equipment has been used in furniture...

  5. Oxidative Stress and Metabolic Perturbations in Wooden Breast Disorder in Chickens.

    Directory of Open Access Journals (Sweden)

    Behnam Abasht

    Full Text Available This study was conducted to characterize metabolic features of the breast muscle (pectoralis major in chickens affected with the Wooden Breast myopathy. Live birds from two purebred chicken lines and one crossbred commercial broiler population were clinically examined by manual palpation of the breast muscle (pectoralis major at 47-48 days of age. Metabolite abundance was determined by gas chromatography/mass spectrometry (GC/MS and liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS using breast muscle tissue samples from 16 affected and 16 unaffected chickens. Muscle glycogen content was also quantified in breast muscle tissue samples from affected and unaffected chickens. In total, levels of 140 biochemicals were significantly different (FDR1.3 or <0.77 between affected and unaffected chickens. Glycogen content measurements were considerably lower (1.7-fold in samples taken from Wooden Breast affected birds when compared with samples from unaffected birds. Affected tissues exhibited biomarkers related to increased oxidative stress, elevated protein levels, muscle degradation, and altered glucose utilization. Affected muscle also showed elevated levels of hypoxanthine, xanthine, and urate molecules, the generation of which can contribute to altered redox homeostasis. In conclusion, our findings show that Wooden Breast affected tissues possess a unique metabolic signature. This unique profile may identify candidate biomarkers for diagnostic utilization and provide mechanistic insight into altered biochemical processes contributing to tissue hardening associated with the Wooden Breast myopathy in commercial chickens.

  6. Comparison of a Wooden House and a Porous Concrete Masonry House

    Directory of Open Access Journals (Sweden)

    Ďurica Pavol

    2014-07-01

    Full Text Available This paper deals with an evaluation of an existing wooden panel house and its comparison with alternative material composition (porous concrete masonry house. The criteria for evaluation are the energy performance, size of the usable area, environmental impact and final costs.

  7. The effect of open air conditions on the properties of wooden material

    African Journals Online (AJOL)

    In this study, the impregnation materials of Tanalith-C (CCA) and Protim 230 WR were used as preservative and water repellant. Wooden materials were taken from beech and black pine. The samples were made subject to weathering conditions for one year. At the end of this period, changes occurred in the samples' ...

  8. Super-energy wrap-up model for renovation of standard wooden houses in Greenland?

    DEFF Research Database (Denmark)

    Bjarløv, Søren Peter; Vladyková, Petra

    2012-01-01

    This paper is based on the developed theoretical practice of super-insulation solution for renovation of exiting standard wooden houses in Greenland built from 1950s until 2006, more than half the building stock in Arctic Greenland. From various perspectives, the wrap-up system is evaluated as a ...

  9. Radiation hardenable impregnating agents for the consolidating conservation of wooden objects

    International Nuclear Information System (INIS)

    Schaudy, R.

    1985-01-01

    Radiation hardenable impregnating agents offer some advantages over the conventional agents. At the author's institution objects up to 110 cm length can be impregnated for conservation. More than 200 monomers and resins have been investigated. The procedure of impregnation is outlined and some kinds of wooden objects conserved in this way listed. (G.W.)

  10. Construction of the 18-meter wooden blade at Nibe-Molle B

    Science.gov (United States)

    Nielsen, P. C.

    1982-11-01

    The construction of an 18 m cantilevered wooden rotor blade for wind turbine-B at Nibe, Denmark is reported. The project is described and conclusions are made based on calculations and tests on the rotor blade. Details are given on choice of material, construction, attachments and fittings, stress problems and loads.

  11. Measurement of radioactive contamination and decontamination on wooden exteriors and garden trees in Northern Fukushima Prefecture

    International Nuclear Information System (INIS)

    Sugiura, Hiroyuki; Kawano, Keisuke; Kayama, Yukihiko

    2012-01-01

    Measurement and decontamination of surface of trees and surrounding wooden structures contaminated by radioactive substance were studied in the gardens and public parks of Northern Fukushima Prefecture which experienced radioactive contamination due to the accident at the TEPCO's Fukushima Daiichi Nuclear Power Plant. The counts per minute (CPM) above the centre surface of wooden garden tables in open air were 1.5 times higher than those of garden benches and 9 times higher than that of a garden bench in the square gazebo. Decontamination of wooden garden benches by high-pressure washing was more effective than planing. The counts per minute (CPM) above the soil around garden trees increased by 1.2 times after high-pressure washing. Radioactivity counting rate did not decrease when the leaves fallen from zelocova trees were removed; however, they decreased by about half when soil cover was installed at the base of the trees. Clearly, the upper surfaces of garden trees and wooden surrounding structures were strongly contaminated by radioactive substances, and they should be decontaminated by high-pressure washing before removing the surface soil. (author)

  12. Experimental Research of Vibration Transmission in Wooden Junctions with a View Towards Statistics

    DEFF Research Database (Denmark)

    Dickow, Kristoffer Ahrens; Kirkegaard, Poul Henning; Andersen, Lars Vabbersgaard

    2012-01-01

    for these variations can lead to lowered production costs. Ongoing research is concerned with the transmission of vibration through wooden junctions found in lightweight building structures. In the literature numerous results of different experiments performed on simple junctions can be found. However, these results...

  13. 3D DIGITAL MODEL DATABASE APPLIED TO CONSERVATION AND RESEARCH OF WOODEN CONSTRUCTION IN CHINA

    Directory of Open Access Journals (Sweden)

    Y. Zheng

    2013-07-01

    Full Text Available Protected by the Tai-Hang Mountains, Shanxi Province, located in north central China, is a highly prosperous, densely populated valley and considered to be one of the cradles of Chinese civilization. Its continuous habitation and rich culture have given rise to a large number of temple complexes and pavilions. Among these structures, 153 can be dated as early as from the Tang dynasty (618- 907C.E. to the end of the Yuan dynasty (1279–1368C.E. in Southern Shanxi area. The buildings are the best-preserved examples of wooden Chinese architecture in existence, exemplifying historic building technology and displaying highly intricate architectural decoration and detailing. They have survived war, earthquakes, and, in the last hundred years, neglect. In 2005, a decade-long conservation project was initiated by the State Administration of Cultural Heritage of China (SACH to conserve and document these important buildings. The conservation process requires stabilization, conservation of important features, and, where necessary, partial dismantlement in order to replace unsound structural elements. Project team of CHCC have developed a practical recording system that created a record of all building components prior to and during the conservation process. After that we are trying to establish a comprehensive database which include all of the 153 earlier buildings, through which we can easily entering, browse, indexing information of the wooden construction, even deep into component details. The Database can help us to carry out comparative studies of these wooden structures, and, provide important support for the continued conservation of these heritage buildings. For some of the most important wooden structure, we have established three-dimensional models. Connected the Database with 3D Digital Model based on ArcGIS, we have developed 3D Digital Model Database for these cherish buildings. The 3D Digital Model Database helps us set up an integrate

  14. D Digital Model Database Applied to Conservation and Research of Wooden Construction in China

    Science.gov (United States)

    Zheng, Y.

    2013-07-01

    Protected by the Tai-Hang Mountains, Shanxi Province, located in north central China, is a highly prosperous, densely populated valley and considered to be one of the cradles of Chinese civilization. Its continuous habitation and rich culture have given rise to a large number of temple complexes and pavilions. Among these structures, 153 can be dated as early as from the Tang dynasty (618- 907C.E.) to the end of the Yuan dynasty (1279-1368C.E.) in Southern Shanxi area. The buildings are the best-preserved examples of wooden Chinese architecture in existence, exemplifying historic building technology and displaying highly intricate architectural decoration and detailing. They have survived war, earthquakes, and, in the last hundred years, neglect. In 2005, a decade-long conservation project was initiated by the State Administration of Cultural Heritage of China (SACH) to conserve and document these important buildings. The conservation process requires stabilization, conservation of important features, and, where necessary, partial dismantlement in order to replace unsound structural elements. Project team of CHCC have developed a practical recording system that created a record of all building components prior to and during the conservation process. After that we are trying to establish a comprehensive database which include all of the 153 earlier buildings, through which we can easily entering, browse, indexing information of the wooden construction, even deep into component details. The Database can help us to carry out comparative studies of these wooden structures, and, provide important support for the continued conservation of these heritage buildings. For some of the most important wooden structure, we have established three-dimensional models. Connected the Database with 3D Digital Model based on ArcGIS, we have developed 3D Digital Model Database for these cherish buildings. The 3D Digital Model Database helps us set up an integrate information inventory

  15. Radon measurements in hispaniola dwellings

    International Nuclear Information System (INIS)

    Gutierrez, J.; Colgan, P.A.; Cancio, D.

    1996-01-01

    The results of a national radon survey and a number of regional surveys of radon in spanish dwelling are reviewed. The best estimate of the geometric mean of indoor radon concentrations is 41.1. Bq/m -3 and single-family dwellings have been shown to be more at risk than apartments. Results need to be interpreted with some caution due to differences in survey methodologies and measurement procedures. The risks from radon exposure are put in perspective by comparison with other voluntary risks. Finally, although a number of 'high risk' areas have already been identified, it is concluded that implementation of a national programme to reduce radon exposure may await a better definition of the problem extent. (authors). 20 refs., 1 tab

  16. 75 FR 82373 - Wooden Bedroom Furniture From the People's Republic of China: Continuation of Antidumping Duty Order

    Science.gov (United States)

    2010-12-30

    ..., filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

  17. 76 FR 49729 - Wooden Bedroom Furniture From the People's Republic of China: Final Results and Final Rescission...

    Science.gov (United States)

    2011-08-11

    ..., computer cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

  18. 77 FR 51754 - Wooden Bedroom Furniture From the People's Republic of China: Final Results and Final Rescission...

    Science.gov (United States)

    2012-08-27

    ... cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining tables, chairs...) and that do not possess the essential character of wooden bedroom furniture in an unassembled...

  19. 75 FR 44764 - Wooden Bedroom Furniture from the People's Republic of China: Final Results of Antidumping Duty...

    Science.gov (United States)

    2010-07-29

    ... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... essential character of wooden bedroom furniture in an unassembled, incomplete, or unfinished form. Such...

  20. 76 FR 68138 - Wooden Bedroom Furniture From the People's Republic of China: Final Results of the 2010...

    Science.gov (United States)

    2011-11-03

    ... cabinets, filing cabinets, credenzas, and bookcases; (4) dining room or kitchen furniture such as dining... for beds) and that do not possess the essential character of wooden bedroom furniture in an...

  1. Experimental and Numerical Analyses of New Massive Wooden Shear-Wall Systems

    Directory of Open Access Journals (Sweden)

    Luca Pozza

    2014-07-01

    Full Text Available Three innovative massive wooden shear-wall systems (Cross-Laminated-Glued Wall, Cross-Laminated-Stapled Wall, Layered Wall with dovetail inserts were tested and their structural behaviour under seismic action was assessed with numerical simulations. The wall specimens differ mainly in the method used to assemble the layers of timber boards composing them. Quasi-static cyclic loading tests were carried out and then reproduced with a non-linear numerical model calibrated on the test results to estimate the most appropriate behaviour factor for each system. Non-linear dynamic simulations of 15 artificially generated seismic shocks showed that these systems have good dissipative capacity when correctly designed and that they can be assigned to the medium ductility class of Eurocode 8. This work also shows the influence of deformations in wooden panels and base connectors on the behaviour factor and dissipative capacity of the system.

  2. The Evolution and the Characteristics of Wooden Flooring for Gym and Sport Courts

    Directory of Open Access Journals (Sweden)

    Olimpia-Minerva TURCAS (cas. DIACONU

    2017-09-01

    Full Text Available This paper presents the evolution of the sport flooring and the general aspects of the wooden surfaces. There are references to FIBA (International Basketball Federation guidelines and requirements for building basketball facilities. Also, the current wooden structures on the market which are approved by the highest authorities in the field - FIBA, FFBB, IHF, WSF and WVBF - are presented. Finally, based on the principle of elasticity which is required for any sport flooring, several structures made from beech wood are being discussed. These proposed structures are characterized by their simpleness, ease of manufacturing and by the competitive price when compared to similar products on the market. The proposed panels are tested according to the RGOCB 2016-2017 (General Organization Regulation of Basket Competitions requirements.

  3. Internal insulation applied in heritage multi-storey buildings with wooden beams embedded in solid masonry brick facades

    DEFF Research Database (Denmark)

    Harrestrup, Maria; Svendsen, Svend

    2016-01-01

    The use of internal insulation is investigated in a heritage building block with wooden beam construction and masonry brick walls as part of an energy renovation. Measurements were carried out and compared to results from a hygrothermal simulation model. The risk of mould growth in the wooden beams...... insulation on north-orientated walls, since the drying potential is reduced. Additionally, caution should be exercised also with west-orientated walls....

  4. Conservation of diverse old wooden objects by impregnation and radiation curing

    International Nuclear Information System (INIS)

    Schaudy, R.; Slais, E.; Eibner, C.

    1983-12-01

    The conservation by impregnation with radiation-curable impregnating agents and subsequent curing with gamma radiation of an medieval wooden window-frame, several gold-coated frame fragments, a primitive flail and a poppy mallet as well as fragments of a painted mail-box and of a border is described and the results are discussed. The process is especially suited for the consolidation of heavily decayed porous objects, e.g. archaeologic findings. (Author) [de

  5. [The application of two occupation health risk assessment models in a wooden furniture manufacturing industry].

    Science.gov (United States)

    Wang, A H; Leng, P B; Bian, G L; Li, X H; Mao, G C; Zhang, M B

    2016-10-20

    Objective: To explore the applicability of 2 different models of occupational health risk assessment in wooden furniture manufacturing industry. Methods: American EPA inhalation risk model and ICMM model of occupational health risk assessment were conducted to assess occupational health risk in a small wooden furniture enterprises, respectively. Results: There was poor protective measure and equipment of occupational disease in the plant. The concentration of wood dust in the air of two workshops was over occupational exposure limit (OEL) , and the C TWA was 8.9 mg/m 3 and 3.6 mg/m 3 , respectively. According to EPA model, the workers who exposed to benzene in this plant had high risk (9.7×10 -6 ~34.3×10 -6 ) of leukemia, and who exposed to formaldehyde had high risk (11.4 × 10 -6 ) of squamous cell carcinoma. There were inconsistent evaluation results using the ICMM tools of standard-based matrix and calculated risk rating. There were very high risks to be attacked by rhinocarcinoma of the workers who exposed to wood dust for the tool of calculated risk rating, while high risk for the tool of standard-based matrix. For the workers who exposed to noise, risk of noise-induced deafness was unacceptable and medium risk using two tools, respectively. Conclusion: Both EPA model and ICMM model can appropriately predict and assessthe occupational health risk in wooden furniture manufactory, ICMM due to the relatively simple operation, easy evaluation parameters, assessment of occupational - disease - inductive factors comprehensively, and more suitable for wooden furniture production enterprise.

  6. Lapped scarf joint with inclined faces and wooden dowels: Experimental and numerical analysis

    Czech Academy of Sciences Publication Activity Database

    Arciszewska-Kędzior, Anna; Kunecký, Jiří; Hasníková, Hana; Sebera, V.

    2015-01-01

    Roč. 94, July (2015), s. 1-8 ISSN 0141-0296 R&D Projects: GA MK(CZ) DF12P01OVV004 Keywords : timber joint * wooden-dowels * full-scale experiments * FEM * failure criterion Subject RIV: AL - Art, Architecture, Cultural Heritage Impact factor: 1.893, year: 2015 http://www.sciencedirect.com/science/article/pii/S0141029615001807

  7. Analysis of energy economic renovation for historic wooden apartment buildings in cold climates

    International Nuclear Information System (INIS)

    Arumägi, Endrik; Kalamees, Targo

    2014-01-01

    Highlights: • Energy saving potential in historic wooden apartment buildings is up to 63%. • In historic wooden apartment buildings an economically viable energy saving level is 50%. • The largest energy saving potential lies in heat source and building service systems. • Of the building structures, insulation of the external wall has the highest potential. • New heating and ventilation systems must be installed to fulfill regulations limits. - Abstract: Buildings represent the largest sector of primary energy consumption and play a major role in saving energy and reducing greenhouse gas emissions. Our analysis of energy consumption and potential energy savings is based on field measurements, computer simulations and economic calculations. The average primary energy consumption (PE) of wooden apartment buildings was 331 kW h/(m 2 a) 83% higher than the limit 180 kW h/(m 2 a) set in national regulations for apartment buildings subject to major renovation. The studied buildings represent a high potential for energy savings. The renovation packages were compiled using different insulation measures, HVAC solutions and energy sources to achieve a 20–65% reduction of primary energy. For historic buildings, the renovation solutions that concentrate on the building envelope can be problematic due to the need to preserve cultural and architectural values. Our calculation results indicate that the cost optimal PE level is around 250 kW h/(m 2 a) and the point at which renovation packages recover expenses is around a PE level of 170 kW h/(m 2 a). In terms of the architectural appearance the point at which renovation packages recover expenses is around a PE level of 210 kW h/(m 2 a). We propose to set a different PE limit for historic wooden apartment buildings with an architectural appearance worth preserving

  8. Science Applied for the Investigation of Imperial Gate from Eighteenth Century Wooden Church of Nicula Monastery

    Directory of Open Access Journals (Sweden)

    I. Bratu

    2017-01-01

    Full Text Available Part of an indestructible component of any orthodox church, the Imperial Gates represent an important symbol in our cultural heritage. But in many cases the Imperial Gates from the wooden churches were damaged. In order to preserve and restore them, the scientific investigations of the Imperial Gate belonging to Nicula Monastery wooden church were performed by employing nondestructive and destructive methods. The wood essence was established, with its “health” status being investigated by FTIR (Fourier Transform Infrared spectroscopy and DSC (Differential Scanning Calorimetry thermal analysis. The painting materials employed by popular artists were determined by FTIR and XRF (X-ray fluorescence spectroscopy as gypsum, calcite (rear background, lead white (Archangel Clothes, lead-minium (Archangel Clothes, leaf, iron oxide (Imperial Gate frame, malachite (green, Prussian blue (blue, orpiment (yellow, aliphatic, ester, and protein (probably egg yolk degradation products. Using similar colors as in the original artwork (resulting from the scientific investigation of the pigments a 3D reconstruction has been performed. The restored Imperial Gates are placed in the old Nicula wooden church, being included into a tourist and religious circuit.

  9. [Study on the excavated wooden carved acupuncture statue of the Western Han Dynasty in Laoguanshan].

    Science.gov (United States)

    Huang, L X

    2017-05-28

    The painted red lines on the wooden carved acupuncture statue of Western Han Dynasty in Laoguanshan, illustrate the running courses of the"eleven meridians"on the body surface in the early meridian doctrine. The carved white lines show the body surface running courses of the"twelve meridians"in the meridian doctrine and the Sanjiao images in Sanjiao doctrine. The dots on the wooden carved acupuncture statue are of two categories, one of them is of regulatory, round and concave spots, which are carved before the process of lacquer undercoat. The other category is of different sizes and in irregular forms, which are carved simultaneously with those white lines. Altogether there are over one hundred dots in these two categories, representing the mai shu (transport point of vessels). The wooden carved acupuncture statue reflects the distinct characteristics on the running courses of meridians, Sanjiao doctrine, the nomenclature and localization of" mai shu "in Bianque medicine, which provides the most powerful evidence for the confirmation of the correlation between Laoguanshan excavated documents and Bianque medicine.

  10. PROCEDURES FOR SEISMIC CHARACTERIZATION OF TRADITIONAL AND MODERN WOODEN BUILDING TYPES

    Directory of Open Access Journals (Sweden)

    Ario Ceccotti

    2016-03-01

    Full Text Available The paper analyzes different wooden buildings types used in past and nowadays to realized low-rise and mid-rise timber structures from the seismic point of view. A preliminary overview about the procedures prescribed by codes for the seismic characterization of the timber building systems is given. Then the definition of the behaviour q-factor in the literature and its relevance in design of structures in seismic areas is treated. Available research methods for estimating the q-factor based on the verification of the nonlinear seismic response of entire buildings by means of experimental tests and numerical simulations are presented and analyzed. The relevance of a proper definition of the yielding limit and of failure condition in the seismic characterization of wooden building systems is treated. Moreover, a comparison between the q-factor estimations obtained using different calculation methods is presented. Lastly, the appropriate q-factor values are given for a reliable and safe seismic design of buildings realized using the examined wooden constructive systems.

  11. Dealing with radon in dwellings

    International Nuclear Information System (INIS)

    Castren, O.

    1987-01-01

    A review is made of the measurements, regulatory initiatives and remedial action taken in Finland since the discovery in 1981 of the first indoor radon concentrations higher than 10,000 Bq/m 3 . The emphasis is on the results of measurements, explanations of them and their use for the rational solution of the radon problems. Localizing the high-concentration areas and dwellings has been one of the main objectives. The latest radon map is based on measurements in 8,150 dwellings in 235 localities. The geographical distribution cannot be explained only by the uranium concentration of the bedrock. The main reason for deviations is the ground permeability. The local fine structure is most notably influenced by the glacifluvial sand and grvel formations (eskers and ice-marginal formations). The highest concentrations are often caused by synergism between an elevated uranium concentration, situation on an esker and a great temperature difference between indoor and outdoor air. They are usually connected with a large seasonal variation, the concentration being at maximum during the coldest time in winter. Indoor radon distribution is compared with newly published maps on the incidence of lung cancer in Finland

  12. 517 DWELLING DENSITY VARIABILITY ACROSS GOVERNMENT ...

    African Journals Online (AJOL)

    Osondu

    confidence level, apartment type had no significant effect on dwelling density in ... words: dwelling density, home spaces, housing units, multifamily apartments ... spaces for work, Obateru (2005) defined .... of Statistics Year Book, 2008; Seeling et al., ... stress. The bedroom and habitable room indicators show similar trend.

  13. Cooking exhaust systems for low energy dwellings

    NARCIS (Netherlands)

    Jacobs, P.; Borsboom, W.A.

    2017-01-01

    Especially in airtight low energy dwellings exhaust systems are of utmost importance as cooking can be a major source of PM2.5 exposure. Dwellings should be designed including facilities enabling extraction of at least 83 dm3/s (300 m3/h) directly to outside. Residents should be able to select an

  14. Dwelling on Everyday Car Journeys

    DEFF Research Database (Denmark)

    Tølbøll, Lene; Jensen, Hanne Louise

    different traffic conditions as well as the emotional states related to the drivers’ thoughts about work and family issues, the materiality of the car and the recreational activities inside the car. Analyses are based on a web-based questionnaire, sent to 373 participating drivers in the Big Data research...... project Intelligent Transportation System Platform North Denmark (Lahrmann 2012). In that project data on e.g. position and speed was collected via an On Board Unit from more than 400 cars in 2012-2014 (Tøfting et. al. 2014). The full dataset includes a driven distance of approximately 14 million km...... experiences related to commuting. The findings will be discussed using theoretical inspiration from Sheller (2004), Bull (2003) and Thrift (2004) and we will suggest that the various emotional experiences of the commuters are of great importance for their ability to use of the car as a dwelling place....

  15. Solar-assisted low energy dwellings

    Energy Technology Data Exchange (ETDEWEB)

    Esbensen, T V

    1980-02-01

    The Zero Energy House Group was formed as a subproject of the CCMS Solar Energy Pilot Study in 1974 by seven participating countries experimenting with solar-assisted low-energy dwellings for temperate and northern European climatic conditions. A Zero Energy House is one in which solar energy is used to meet the reduced energy needs of buildings incorporating various thermal energy conservation features. This final report of the Zero Energy House Group includes brief descriptions of 13 major low-energy dwellings in the participating CCMS countries. An overall assessment of the state-of-the-art in solar-assisted low-energy dwellings is also included.

  16. Timber - Material of the Future - Examples of Small Wooden Architectural Structures

    Science.gov (United States)

    Żmijewki, Tomasz; Wojtowicz-Jankowska, Dorota

    2017-10-01

    The aim of this article is to present various types of wood-based products, classified as engineered timber, while specifying the implications of their structural properties for their forms. Timber is used as a construction material due to its fire resistance, good structural characteristics and insulating properties. The advent of new technologies of wood processing and wood-based materials production has converted timber into a high-tech material, thus encouraging the architects to consider it ever more often in their projects. As wooden technologies overcome constraints, timber begins to compete with steel and concrete. The design characteristics of new wood-based products allow wooden structures to be higher, have larger spans, and more diverse forms than ever. Wood-based materials include materials made of solid wood, veneers, strand, and wood which, due to its inferior quality, would otherwise be unfit for constructions. Elements and layers of these products are glued using different kinds of strong and water-resistant adhesives. The article presents the history of development of new wood technologies, discussing increasingly popular wood-based materials such as glued laminated timber, cross-laminated timber, or structural composite lumber. The paper analyses their technical and fire-resistance properties, and points to ecological aspect, as factors contributing to the growing popularity of these materials. Finally, the timber’s characteristics are contrasted with those of steel and concrete. The article lists examples of wooden objects representing the so-called small architecture structures from across Europe. They illustrate the potential, the uniqueness and the versatility that wood-based materials offer for constructors and architects. All these features form sufficient grounds for stating that timber truly is a construction material of the 21st century.

  17. 25 CFR 700.55 - Decent, safe, and sanitary dwelling.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Decent, safe, and sanitary dwelling. 700.55 Section 700... PROCEDURES General Policies and Instructions Definitions § 700.55 Decent, safe, and sanitary dwelling. (a) General. The term decent, safe, and sanitary dwelling means a dwelling which— (1) Meets applicable federal...

  18. Combined radiation and chemical method of protection against organic pests of wooden objects

    International Nuclear Information System (INIS)

    Santar, I.; Urban, J.

    Radiation disinsection and fungus removal are considered to be two suitable methods of protecting wooden historical objects. A dose of 500 Gy (from a 60 Co source) has no harmful effect on oil or tempera polychromy, on inlays or other surface finishes of such objects. Radiation disinsection does not protect the treated article from future insect attack and is therefore supplemented with a preservation procedure in which a solution of pentachlorophenol and tributyl tin oxide in an aromatic solvent is used. A unit for preservation by radiation at Roztoky near Prague is described. (H.S.)

  19. Examinations of wooden sculptures from the altar of Veit Stoss in Cracow

    International Nuclear Information System (INIS)

    Braziewicz, J.; Dudzik, R.; JaskoIa, M.; Kubala-Kukus, A.; Kretschmer, W.; Rutkowski, J.; Semaniak, J.; Scharf, A.; Stankiewicz, M.; Uhl, T.

    2005-01-01

    The AMS facility at Erlangen University was used for dating samples from a wooden coping of the Veit Stoss's altar, one taken from its component originating from the 15th century and another one taken from its newer renovated part. The XRF method has been used to investigate trace element distribution inwards the sculptures. Concentrations of some elements, including Cl and Pb, show systematic increase while approaching the front or back side of the sculptures. The measured distributions are discussed in the context of history of the altar, in particular renovation and restoration procedures it underwent over the years

  20. Investigation of interior post-insulated masonry walls with wooden beam ends

    DEFF Research Database (Denmark)

    Morelli, Martin; Svendsen, Svend

    2013-01-01

    The preponderant number of multistorey buildings constructed in Denmark in the period between 1850 and 1930 were built with masonry walls incorporating wooden floor beams. Given the nature of this construction, it is supposed that significant energy savings could be achieved by simply insulating...... the facades of such buildings. To maintain the exterior appearance of the facade, the only possible means of installing the required insulation is placing it on the interior of the wall. However, the installation of insulation on the interior of the wall assembly reduces the overall drying potential...

  1. The influence of ventilation on moisture conditions in facades with wooden cladding

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan de Place; Brandt, Erik

    2009-01-01

    A ventilated cavity behind the cladding of timber frame walls is often considered good building practice that facilitates the removal of moisture from the construction. However, moisture will only be removed from the construction by ventilating it with dry air, whereas ventilating with humid air...... might add moisture to the construction. Full-size wall elements with wooden cladding placed in a test building were exposed to natural climate on the outside and to a humid indoor climate on the inside. Temperature and moisture conditions inside the wall elements and climate parameters were monitored...

  2. Parameter survey of a rib stiffened wooden floor using sinus modes model

    DEFF Research Database (Denmark)

    Sjökvist, Lars-Göran; Brunskog, Jonas; Jacobsen, Finn

    2008-01-01

    of the sound insulation for lightweight buildings have the possibility to speed up the development of new techniques and in the end give tenants better quality of life. This study uses Fourier sinus series to calculate the vibrations on a rib stiffened plate. The beams are modelled as line forces and moments......In buildings built with new techniques there exists a need for better understanding of their acoustical performance. The development of large wooden houses slows down by the uncertainty and costly testing that have to be performed many times before gaining good results. A greater understanding...

  3. Renovation and Strengthening of Wooden Beams With CFRP Bands Including the Rheological Effects

    Directory of Open Access Journals (Sweden)

    Kula Krzysztof

    2016-09-01

    Full Text Available The paper presents a work analysis of wooden beams reinforced with glued composite bands from the top and resin inclusions, taking into account the rheology of materials. The paper presents numerical model of the multimaterial beam work including rheological phenomena described by linear equations of viscoelasticity. For the construction of this model one used MES SIMULIA ABAQUS environment in which were prepared its own procedures containing rheological models. The calculation results were compared with the literature data. One has done an analysis of the advisability of the use of CFRP reinforcements bands in terms of rheological phenomena.

  4. Case study: Examples of Wooden Vernacular Architecture - Turkish Houses in Western Anatolia

    Directory of Open Access Journals (Sweden)

    Yilmaz Karaman Özgül

    2015-12-01

    Full Text Available Wooden material is described as the oldest construction material along with stone. In the historical process, especially for the buildings of shelter, timber construction components are seen to be used as primary and indispensable structural system components in different geographies of the world as well as Anatolia. This paper focuses on timber-frame structures of four different settlements from Western Anatolia. It is aimed to analyze the traditional techniques, in order to transmit our cultural heritage to the next generations, as well as obtaining some data on construction techniqes to be used for creating alternative solutions to the house production of today.

  5. Traditional Wooden Architecture and Landscape in Karelia. Methodological considerations for the analysis and census

    Directory of Open Access Journals (Sweden)

    Sandro Parinello

    2012-11-01

    Full Text Available The survey work on the Karelian landscape and traditional architecture, embedded within the European research project entitled "Wooden Architecture. Karelian Timber Traditional Architecture and Landscape", is intended to enable understanding of how Karelian culture and history have led, over time, unique urban landscapes. The context of transformation, in which they were involved in both the behavioral habits of local populations both traditional architectural ones, which are mixed with models and with the administrative Soviet structures, were analyzed in this scientific field in order to not compromise the conservation and enhancement of the historic, architectural and landscape of this country.

  6. Removal of alum from Iron-Age wooden objects by an applied electric field

    DEFF Research Database (Denmark)

    Christensen, Iben Vernegren; Ottosen, Lisbeth M.; Jensen, Poul

    2010-01-01

    In this paper removal of potassium, sulfate and aluminum ions from waterlogged alum treated wood with the use of an applied electric field is described. An electric DC field was applied across the wood for 4-20 days. At the end of the experiments sulfate had moved as expected towards the anode...... was not obtained in the experiments reported here, but the high conductivity and the transport of the measured ions due to the electric field indicates that an applied electric field as a method for removal of alum and other unwanted ions from treated wooden objects warrants further investigation....

  7. Internal Insulation of Masonry Walls with Wooden Floor Beams in Northern Humid Climate

    DEFF Research Database (Denmark)

    Morelli, Martin; Scheffler, Gregor Albrecht; Nielsen, Toke Rammer

    2010-01-01

    Multi-story buildings in Denmark from 1850–1950 are built with masonry walls and wooden floor beams. Large energy savings can be achieved by insulating the facades. Often interior insulation is the only possibility in order to keep the appearance of the external facade. The internal insulation...... reduces the drying potential of the wall, which might lead to moisture problems in the beam ends embedded in the masonry due to absorption of driving rain. This paper describes a solution to avoid the moisture problems and still achieve large energy savings. The thermal analyses are made in thermal...

  8. Hold it! memory affects attentional dwell time

    OpenAIRE

    Parks, Emily L.; Hopfinger, Joseph B.

    2008-01-01

    The allocation of attention, including the initial orienting and the subsequent dwell time, is affected by several bottom-up and top-down factors. How item memory affects these processes, however, remains unclear. Here, we investigated whether item memory affects attentional dwell time by using a modified version of the attentional blink (AB) paradigm. Across four experiments, our results revealed that the AB was significantly affected by memory status (novel vs. old), but critically, this ef...

  9. Technological quality, mineral profile, and sensory attributes of broiler chicken breasts affected by White Striping and Wooden Breast myopathies.

    Science.gov (United States)

    Tasoniero, G; Cullere, M; Cecchinato, M; Puolanne, E; Dalle Zotte, A

    2016-11-01

    The aim of the research was to study the impact of white striping and wooden breast myopathies on the technological quality, mineral, and sensory profile of poultry meat. With this purpose, a total of 138 breasts were selected for a control group with normal breasts (N), a group of breasts characterised by white striping (WS) myopathy, and a group of breasts having both white striping and wooden breast myopathies (WSWB). Data revealed that the simultaneous presence of the two myopathies, with respect to the WS lesion individually considered, had a further detrimental effect on pH (6.04 vs. 5.96; P white striping and wooden breast myopathies. © 2016 Poultry Science Association Inc.

  10. How can a life cycle inventory parametric model streamline life cycle assessment in the wooden pallet sector?

    DEFF Research Database (Denmark)

    Niero, Monia; Di Felice, Francesco; Ren, Jingzheng

    2014-01-01

    , as the information required for fulfilling the LCI are standard information about the features of the wooden pallet and its manufacturing process. The contribution analysis on the reference product revealed that the most contributing life cycle stages are wood and nails extraction and manufacturing (positive value......This study discusses the use of parameterization within the life cycle inventory (LCI) in the wooden pallet sector, in order to test the effectiveness of LCI parametric models to calculate the environmental impacts of similar products. Starting from a single case study, the objectives of this paper......; these correlations can be used to improve the design of new wooden pallets.The conceptual scheme for defining the model is based on ISO14040-44 standards. First of all, the product system was defined identifying the life cycle of a generic wood pallet, as well as its life cycle stages. A list of independent...

  11. Dwelling thermal renovation: which stakes, which solutions?

    International Nuclear Information System (INIS)

    Delduc, Paul; Demeulenaere, Laurence; Verdure, Mathieu; Ayong Le Kama, Alain; Fuk Chun Wing, Dimitri; Kiefer, Noemie; Mauroux, Amelie; Charlier, Dorothee; Hini, Sihame; Pinto Silva, Kleber; Giraudet, Louis Gaetan; Nauleau, Marie-Laure; Daussin-Benichou, Jeanne-Marie; Teissier, Olivier; Finidori, Esther; Grandjean, Alain; Allibe, Benoit; Gadrat, Pierre; Couriol, Aude; Menard, Francois; Rouquette, Celine; Houriez, Guillaume; Francois, Dominique; Aubert, Celine; Canardon, Daniel

    2015-01-01

    This publication proposes three sets of contributions. The first one addresses context and stakes. The contributions propose: a literature review on household behaviour and investments in energy efficiency, a focus on the key role of dwellings in energy transition through a comparative study of the four pathways of the National Debate for Energy Transition, and a discussion about consensus and uncertainties regarding the determining factors of heating temperature in dwellings. The second set addresses public policies and their assessment: improvement of the technical-economical assessment of the benefit of dwelling energetic renovations, discussion of the organisation and results of a survey on dwelling, equipment, and energy needs and uses, an analysis of several measures aimed at reaching objectives of energy efficiency of dwellings, a discussion of renovation works quality, a discussion of the impact of the sustainable development tax credit on thermal renovation, the optimisation of energy renovation in co-properties by third party financing, some foreign examples of policies in favour of dwelling thermal renovation. The third set of contributions addresses the needed technical, organisational and market evolutions: how the building sector can face the challenges of energy transition, the possibilities to propose innovative solutions adapted to existing housing buildings, and a comparative analysis of material and building equipment costs and market structures in Europe. Other texts are proposed in appendix: the origin of the Phebus survey, a description of incentive arrangements, and a map of climate zones in France

  12. Neurobiological Mediators of Squalor-dwelling Behavior.

    Science.gov (United States)

    Kahn, David A

    2017-09-01

    Squalor-dwelling behavior has been characterized as living in conditions so unsanitary that feelings of revulsion are elicited among visitors. This behavior is commonly associated with an insensitivity to distress/disgust and a failure to understand the direness of one's living situation, which leads to social isolation and impairment in quality of life. Etiologically, several associations have been described in the literature, including age-related decline, lower socioeconomic status, and rural dwelling status. Primary neuropsychiatric disorders, such as psychosis, alcoholism, dementia, personality disorders, developmental delays, and learning or physical disabilities are frequently seen in squalor-dwelling individuals. However, none of these disorders seems to be necessary or sufficient to explain the behavior. Neurobiologically, squalor-dwelling behavior has been associated with frontal lobe dysfunction as evidenced by executive dysfunction; however, cognitive impairments also fail to completely explain this behavior. The purpose of this report is to describe a typical case of squalor-dwelling behavior and use it as an example to illustrate the complexity of uncovering the neurobiological basis for this maladaptive personal and public health threat. Neuroimaging findings from our case and a review of the literature point toward decreased activity in the insular cortex and the amygdala as a unifying biological explanation for squalor-dwelling behaviors.

  13. Radon-thoron levels and inhalation dose distribution patterns in India dwellings

    International Nuclear Information System (INIS)

    Ramachandran, T.V.; Eappen, K.P.; Nair, R.N.; Mayya, Y.S.; Sadasivan, S.

    2003-09-01

    indoor inhalation dose rates. High indoor inhalation dose rates are observed at the northeastern region of India. The contribution due to thoron and its progeny in these regions is found to be nearly 30 % of the total inhalation dose. The dependence of indoor radon levels on the dwelling types, examined statistically, has indicated significant differences between mosaic and wooden floors having plastered and whitewashed walls. A radon/ thoron atlas of the country has been prepared using the data generated not only from from this project but also from earlier surveys carried out by this Centre. (author)

  14. Implications of white striping and wooden breast abnormalities on quality traits of raw and marinated chicken meat.

    Science.gov (United States)

    Mudalal, S; Lorenzi, M; Soglia, F; Cavani, C; Petracci, M

    2015-04-01

    One of the consequences of intense genetic selection for growth of poultry is the recent appearance of abnormalities in chicken breast muscles, such as white striping (characterised by superficial white striations) and wooden breast (characterised by pale and bulged areas with substantial hardness). The aim of this study was to evaluate the quality traits of chicken fillets affected by white striping and wooden breast abnormalities. In two replications, 192 fillets were divided into the following four classes: normal (n=48; absence of any visual defects), white striping (n=48, presence of white striations), wooden breast (n=48; diffusely presence of hardened areas) and white striping/wooden breast (n=48; fillets affected by both abnormalities). Morphology, raw meat texture and technological properties were assessed in both unprocessed (pH, colour, drip loss, cooking loss and cooked meat shear force) and marinated meat (marinade uptake, purge loss, cooking loss and cooked meat shear force). Fillets affected by white striping, wooden breast or both abnormalities exhibited higher breast weights compared with normal fillets (305.5, 298.7, 318.3 and 244.7 g, respectively; Pcooking losses than white-striped fillets for both unprocessed and marinated meats. On the other hand, white-striped fillets showed a moderate decline in marinade and cooking yield. Fillets affected by both abnormalities had the highest (Pcooked meat, drip loss, purge loss and cooked meat shear force were negligible or relatively low and of little practical importance. Thus, the presence of white striping and wooden breast abnormalities impair not only breast meat appearance but also the quality of both raw and marinated meats mainly by reducing water holding/binding abilities.

  15. Biomass as renewable energy resource in Bosnia and Herzegovina. The state with the wooden waste

    International Nuclear Information System (INIS)

    Petrovic, Semin; Smajevic, Izet

    2004-01-01

    Bosnia and Herzegovina today fulfills its needs for primary energy mainly from fossil fuels. In spite of significant resources of all renewable sources of energy and despite evidently open possibility for their utilization, these resources (except for, partly, hydropower) hove practically not been used to date. Due to its climatic situation, Bosnia and Herzegovina is very rich in woodland. Thus the production, harvesting and processing of timber is one of the country's oldest economic activities, and also has nowadays major strategic importance for the country's economic development. The purpose of this paper is to point out the energy potential of wooden waste, as a component of still un sufficiently utilized biomass in Bosnia and Herzegovina. In this paper, attention is primarily focused on results of research in the area of estimation of obviously significant energy potential of wooden waste produced in rather widespread wood and timber industry of Bosnia and Herzegovina. Preliminary research of this resource carried out to date showed that technical potential of biomass from timber waste is approx. 8,5 PJ. (Author)

  16. Testing of wooden construction elements with ultrasonic echo technique and x-ray

    International Nuclear Information System (INIS)

    Hasenstab, A.; Krause, M.; Osterloh, K.

    2008-01-01

    Damages inside of wooden construction components (e.g. interior rot) or at inaccessible surfaces represent a special problem, since they are difficult to recognize from the outside, they can even cause a sudden failure of the component. As a result the research, it could be proved that ultrasonic echo technique can be used on wood both with longitudinal and transverse waves. Further more the different influences of the wood fibres on the sound velocity of the longitudinal and transverse waves is pointed out on the basis results of measurements. The efficiency of the ultrasonic echo technique is shown on wooden specimens. The combination of ultrasonic echo technique and radiography resulted in a very substantial reduction of possible misinterpretations of damage. There it is possible to detect the damage from the undamaged side of the specimen by ultrasound echo. The spread of the damage can be obtained with mobile x-ray measurements. Finally the results show, that ultrasonic methods are more sensitive starting decay and cracks parallel to the surface.

  17. Triatomines in dwellings and outbuildings in an endemic area of Chagas disease in northeastern Brazil

    Directory of Open Access Journals (Sweden)

    Antonio Fernando Rodrigues Lima

    2012-12-01

    Full Text Available INTRODUCTION: The present study identified the triatomines collected in intra and peri-domestic environments, observed the occurrence of Trypanosoma cruzi infection in triatomines and correlated this information with housing conditions and the fauna associated with the rural areas of the City of Itabaianinha, located in the State of Sergipe, Brazil. METHODS: Quarterly visits were conducted between March 2009 and March 2010, and the homes to be visited for the active search of insects were determined by random selection. In each housing unit, the insects were collected by a manual search with a metal clip and flashlight to inspect openings and cavities, with a collection time of one hour/home/individual. The Pirisa® dislodge chemical was used to force the insects to leave their ecotopes. Analysis of the intestinal contents of triatomines was performed in the laboratory to establish the presence of Trypanosomatidae. RESULTS: Of the 103 dwellings surveyed, 17.5% were infested with Panstrongylus megistus. The village of Mutuca exhibited the highest infestation rate (38.1%. All the villages with relevant infestation rates were situated in the northern area of the city. The highest percentage of vector infection was found in the village of Água Boa (56.5%. The rural dwellings were found to be primarily brick or wooden house with or without roughcast or plastered walls, and the outbuilding most frequently associated with triatomines was the chicken run. CONCLUSIONS: These results emphasise the need for broader vector control and surveillance and for educational campaigns in the context of the Chagas Disease Control Program.

  18. Triatomines in dwellings and outbuildings in an endemic area of Chagas disease in northeastern Brazil.

    Science.gov (United States)

    Lima, Antonio Fernando Rodrigues; Jeraldo, Veronica de Lourdes Sierpe; Silveira, Maxwell Souza; Madi, Rubens Riscala; Santana, Thiago Bicudo Krempel; Melo, Cláudia Moura de

    2012-12-01

    The present study identified the triatomines collected in intra and peri-domestic environments, observed the occurrence of Trypanosoma cruzi infection in triatomines and correlated this information with housing conditions and the fauna associated with the rural areas of the City of Itabaianinha, located in the State of Sergipe, Brazil. Quarterly visits were conducted between March 2009 and March 2010, and the homes to be visited for the active search of insects were determined by random selection. In each housing unit, the insects were collected by a manual search with a metal clip and flashlight to inspect openings and cavities, with a collection time of one hour/home/individual. The Pirisa® dislodge chemical was used to force the insects to leave their ecotopes. Analysis of the intestinal contents of triatomines was performed in the laboratory to establish the presence of Trypanosomatidae. Of the 103 dwellings surveyed, 17.5% were infested with Panstrongylus megistus. The village of Mutuca exhibited the highest infestation rate (38.1%). All the villages with relevant infestation rates were situated in the northern area of the city. The highest percentage of vector infection was found in the village of Água Boa (56.5%). The rural dwellings were found to be primarily brick or wooden house with or without roughcast or plastered walls, and the outbuilding most frequently associated with triatomines was the chicken run. These results emphasise the need for broader vector control and surveillance and for educational campaigns in the context of the Chagas Disease Control Program.

  19. Radon in Dwellings in the Republic of Kalmykia

    Energy Technology Data Exchange (ETDEWEB)

    Aakerblom, Gustav (Aakerblom och Aakerblom HP, Skaerholmen (Sweden)); German, Olga; Soederman, Ann-Louise (Swedish Radiation Safety Authority, Stockholm (Sweden)); Stamat, Ivan; Venkov, Vladimir (Research Inst. of Radiation Hygiene, St. Petersburg (Russian Federation))

    2009-02-15

    The National Radon Survey in the Republic of Kalmykia, Russian Federation during 2006-2007 was carried out in a cooperation project between the Swedish Radiation Protection Authority (SSI) and the Russian Institute of Radiation Hygiene (RIRH). In August 2006 SSI, RIRH, federal and local authorities carried out a field study in Kalmykia when radon daughter measurements (equilibrium equivalent radon concentrations in the air) and gamma radiation measurements were made in 103 buildings. Gamma spectrometry measurements were made at several sites. During the visit the cooperating parties devoted some time to the education of local authorities on radon related issues. During three months in the winter season 2006-2007, long term radon trace measurements were made in 525 randomly chosen dwellings in the Republic of Kalmykia. The radon gas activity varied between 3 and 973 Bq/m3, with a mean value of 122 Bq/m3. In 19 of a total of 835 measurement points, the radon activity exceeded the maximum permitted value in Russia of 200 Bq/m3 of EERC. The year-round radon trace measurement were made in 20 houses in Elista, the capital of the Republic of Kalmykia, for comparison with the three-month measurements. The year-round measurements showed some higher values for the radon activity, and a correction factor of 0.85 was applied. Using data on the number of people living in detached houses and apartments, and applying the radon activities measured, the number of new lung cancer cases caused by radon was calculated to be 20 to 40 of the 100 new cases reported annually. The methods of construction of the dwellings in Kalmykia is greatly influenced by the history and culture. Most of them were built after World War II and there are only a few that are newly built because of the poor economic situation and the low population growth rate in the Republic. Most people live in detached houses, one-storied with 3-5 rooms, built directly on the ground or on coquina blocks or on a cast

  20. 78 FR 35249 - Wooden Bedroom Furniture From the People's Republic of China: Final Results of Antidumping Duty...

    Science.gov (United States)

    2013-06-12

    ....; Dongying Huanghekou Furniture Industry Co., Ltd.; Sheng Jing Wood Products (Beijing) Co., Ltd.; and Telstar... Furniture Industry Co., Ltd.; Sheng Jing Wood Products (Beijing) Co., Ltd.; and Telstar Enterprises Ltd... DEPARTMENT OF COMMERCE International Trade Administration [A-570-890] Wooden Bedroom Furniture...

  1. Persistence of wild Streptococcus thermophilus strains on wooden vat and during the manufacture of a traditional Caciocavallo type cheese.

    Science.gov (United States)

    Settanni, L; Di Grigoli, A; Tornambé, G; Bellina, V; Francesca, N; Moschetti, G; Bonanno, A

    2012-04-02

    The present work was undertaken to evaluate the influence of the wooden dairy plant equipment on the microbiological characteristics of curd to be transformed into Caciocavallo Palermitano cheese. Traditional raw milk productions were performed concomitantly with standard cheese making trials carried out in stainless steel vat inoculated with a commercial starter. Milk from two different farms (A and B) was separately processed. The wooden vat was found to be a reservoir of lactic acid bacteria (LAB), while unwanted (spoilage and/or pathogenic) microorganisms were not hosted or were present at very low levels. All microbial groups were numerically different in bulk milks, showing higher levels for the farm B. LAB, especially thermophilic cocci, dominated the whole cheese making process of all productions. Undesired microorganisms decreased in number or disappeared during transformation, particularly after curd stretching. LAB were isolated from the wooden vat surface and from all dairy samples, subjected to phenotypic and genetic characterization and identification. Streptococcus thermophilus was the species found at the highest concentration in all samples analyzed and it also dominated the microbial community of the wooden vat. Fourteen other LAB species belonging to six genera (Enterococcus, Lactobacillus, Lactococcus, Leuconostoc, Streptococcus and Weissella) were also detected. All S. thermophilus isolates were genetically differentiated and a consortium of four strains persisted during the whole traditional production process. As confirmed by pH and the total acidity after the acidification step, indigenous S. thermophilus strains acted as a mixed starter culture. Copyright © 2012 Elsevier B.V. All rights reserved.

  2. Assessment of the environmental effects associated with wooden bridges preserved with creosote, pentachlorophenol, or chromated copper arsenate

    Science.gov (United States)

    Kenneth M. Brooks

    Timber bridges provide an economical alternative to concrete and steel structures, particularly in rural areas with light to moderate vehicle traffic. Wooden components of these bridges are treated with chromated copper arsenate type C (CCA), pentachlorophenol, or creosote to prolong the life of the structure from a few years to many decades. This results in reduced...

  3. An experimental and statistical study of the behavior of the vibration field in two coupled lightweight wooden joist floors

    DEFF Research Database (Denmark)

    Sjökvist, Lars-Göran; Brunskog, Jonas

    2013-01-01

    The aim of this study was to evaluate the vibration level attenuation of a common wooden floor structure and to present the results together with the statistical precision of the evaluation. Linear regression was used to determine the attenuation rate in the two main directions of the floor...

  4. Radon in dwellings and shelters in Zagreb

    International Nuclear Information System (INIS)

    Lokobauer, N.; Franic, Z.; Sencar, J.; Bauman, A.

    1994-01-01

    Since 1990, radon activity was measured in dwellings of Zagreb. In only small number of dwellings radon activity exceeded 100 Bq.m -3 . Since the inhabitants of Croatia have to stay in the facilities below the ground due to the war against Croatia, the paper gives also data on radon activity measured in the shelters and cellars in 1991. Measurements were performed using Kodak LR-115 detectors, type II. At several locations radon activity was measured with a silicon detector (Radhome). Radon values obtained for the shelters, cellars and dwellings at all locations were compared. With respect to children as most susceptable population group the paper gives data on radon activity for kindergartens and elementary schools (and its shelters) where children usually spend almost one-third to the day. (orig.)

  5. Recommended action levels for radon in dwellings

    International Nuclear Information System (INIS)

    1988-01-01

    The recommendation made by a group appointed by the Directorate of Public Health, arrives at the conclusion that radon in Norwegian dwellings implies a substantial health problem for the country. For this reason it is recommended that actions should be taken to reduce the radiation exposure from radon in Norway. Upper levels for such actions are set to 200 Bq/m 3 (radon in air of dwellings) for new contructions. For existing dwellings having concentrations of 200 - 800 Bq/m 3 , simple and unexpensive remedial actions to reduce levels are sufficient. When levels exceed 800 Bq/m 3 , more elaborate and costly actions are necessary. An evaluation of the extent of the radon problem in Norway is included, together with a survey of the cost and benefit involved in choosing various levels for remedial actions

  6. An Evaluation of Test and Physical Uncertainty of Measuring Vibration in Wooden Junctions

    DEFF Research Database (Denmark)

    Dickow, Kristoffer Ahrens; Kirkegaard, Poul Henning; Andersen, Lars Vabbersgaard

    2012-01-01

    In the present paper a study of test and material uncertainty in modal analysis of certain wooden junctions is presented. The main structure considered here is a T-junction made from a particleboard plate connected to a spruce beam of rectangular cross section. The size of the plate is 1.2 m by 0.......6 m. The T-junctions represent cut-outs of actual full size floor assemblies. The aim of the experiments is to investigate the underlying uncertainties of both the test method as well as variation in material and craftmanship. For this purpose, ten nominally identical junctions are tested and compared...... to each other in terms of modal parameters such as natural frequencies, modeshapes and damping. Considerations regarding the measurement procedure and test setup are discussed. The results indicate a large variation of the response at modes where the coupling of torsion in the beam to bending of the plate...

  7. Intensity estimation of historical earthquakes through seismic analysis of wooden house

    International Nuclear Information System (INIS)

    Choi, I. K.; Soe, J. M.

    1999-01-01

    The intensity of historical earthquake records related with house collapses are estimated by the seismic analyses of traditional three-bay-straw-roof house. Eighteen artificial time histories for magnitudes 6-8, epicentral distances 5 km - 350 km and hard and soft soil condition were generated for the analyses. Nonlinear dynamic analyses were performed for a traditional three-bay-roof house. Damage level of the wooden house according to the input earthquake motions and the MM intensity were estimated by maximum displacement response at the top of columns. Considering the structural characteristics of the three-bay-straw-roof house, the largest historical earthquake record related to the house collapse is about MMI VIII

  8. Dating a composite ancient wooden artefact and its modifications. A case study

    International Nuclear Information System (INIS)

    Poldi, G.; Quartana, L.; Galli, A.

    2008-01-01

    The recent restoration of the large wooden doors of the medieval St. Ambrogio Basilica in Milan gave the opportunity for a, broad project of scientific examination, including dating with radiocarbon and dendrochronology. The two doors represented a puzzle for art historians, because of the non-documented modifications occurred during their history. In fact; they are composed of various wooden elements, some of them surely modified with the 1750 jubilee restoration, assembled into three layers. The large number of these elements suggested not to restrict the samples only to the main carved scenes, but to extend them to frames and back-boards, in order to obtain a consistent set. of data, and a more reliable chronology. Analytical campaign oriented to dating, coordinated by Quartana Restauri and LAM (University of Bergamo), took into account the different characteristics of woods, needing 24 samples carefully extracted from hidden areas to be radiocarbon dated by ANIS (Accelerator Mass Spectrometry) at CEDAD (Centre for Dating and Diagnostics, University of Salento, Lecce, Italy) laboratories, and two of them dated at LABEC (Laboratory of nuclear techniques for cultural heritage, University of Florence and INFN, Italy) for comparison. The results obtained for the vertical woods of the back, belonging to Renaissance period, suggested further studies employing dendrochronological analyses based on high-resolution photographs, carried out by CUDaM (University of Milano-Bicocca). ED-XRF (Energy Dispersive X-ray Fluorescence) analyses were also carried on, by LAM, with portable instruments. in order to study the composition of the residues of polychromy, where present.

  9. Assessing the global warming potential of wooden products from the furniture sector to improve their ecodesign

    International Nuclear Information System (INIS)

    González-García, Sara; Gasol, Carles M.; Lozano, Raúl García; Moreira, Ma Teresa; Gabarrell, Xavier; Rieradevall i Pons, Joan; Feijoo, Gumersindo

    2011-01-01

    The main objective of this study was to determine the global warming potential of several wood products as an environmental criterion for their ecodesign. Two methodologies were combined: the quantification of greenhouse gas emissions (equivalent CO 2 ) of several representative wood based products from the furniture sector and the integration of environmental aspects into product design. The products under assessment were classified in two groups: indoor products and outdoor products, depending on their location. “Indoor products” included a convertible cot/bed, a kitchen cabinet, an office table, a living room furniture, a headboard, youth room accessories and a wine crate, while the “Outdoor products” analysed were a ventilated wooden wall and a wooden playground. Spanish wood processing companies located in Galicia (NW Spain) and Catalonia (NE Spain) were analysed in detail. The life cycle of each product was carried out from a cradle-to-gate perspective according to Life Cycle Assessment (LCA) methodology, using global warming potential as the selected impact category. According to the results, metals, boards and energy use appeared to be the most contributing elements to the environmental impact of the different products under assessment, with total contributions ranging from 40% to 90%. Furthermore, eco-design strategies were proposed by means of the methodology known as Design for the Environment (DfE). Improvement strategies viable for implementation in the short term were considered and analysed in detail, accounting for remarkable reductions in the equivalent CO 2 emissions (up to 60%). These strategies would be focused on the use of renewable energies such as photovoltaic cells, the promotion of national fibres or changes in the materials used. Other alternatives to be implemented in the long term can be of potential interest for future developments.

  10. Assessing the global warming potential of wooden products from the furniture sector to improve their ecodesign

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez-Garcia, Sara, E-mail: sara.gonzalez@usc.es [Division of Biology, Department of Life Sciences, Sir Alexander Fleming Building, Imperial College of London, South Kensington Campus, London SW7 2AZ (United Kingdom); Department of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782- Santiago de Compostela (Spain); Gasol, Carles M.; Lozano, Raul Garcia [Inedit Innovacio, Carretera de Cabrils, km 2 -IRTA-, 08348 Cabrils, Barcelona (Spain); SosteniPrA - UAB-IRTA, Institute of Environmental Science and Technology (ICTA), Universitat Autonoma de Barcelona (UAB), 08193 Bellaterra, Barcelona (Spain); Moreira, Ma Teresa [Department of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782- Santiago de Compostela (Spain); Gabarrell, Xavier; Rieradevall i Pons, Joan [SosteniPrA (UAB-IRTA), Institute of Environmental Science and Technology (ICTA), Universitat Autonoma de Barcelona UAB, 08193 Bellaterra, Barcelona (Spain); Department of Chemical Engineering, Universitat Autonoma de Barcelona (UAB), 08193 Bellaterra, Barcelona (Spain); Feijoo, Gumersindo [Department of Chemical Engineering, School of Engineering, University of Santiago de Compostela, 15782- Santiago de Compostela (Spain)

    2011-12-01

    The main objective of this study was to determine the global warming potential of several wood products as an environmental criterion for their ecodesign. Two methodologies were combined: the quantification of greenhouse gas emissions (equivalent CO{sub 2}) of several representative wood based products from the furniture sector and the integration of environmental aspects into product design. The products under assessment were classified in two groups: indoor products and outdoor products, depending on their location. 'Indoor products' included a convertible cot/bed, a kitchen cabinet, an office table, a living room furniture, a headboard, youth room accessories and a wine crate, while the 'Outdoor products' analysed were a ventilated wooden wall and a wooden playground. Spanish wood processing companies located in Galicia (NW Spain) and Catalonia (NE Spain) were analysed in detail. The life cycle of each product was carried out from a cradle-to-gate perspective according to Life Cycle Assessment (LCA) methodology, using global warming potential as the selected impact category. According to the results, metals, boards and energy use appeared to be the most contributing elements to the environmental impact of the different products under assessment, with total contributions ranging from 40% to 90%. Furthermore, eco-design strategies were proposed by means of the methodology known as Design for the Environment (DfE). Improvement strategies viable for implementation in the short term were considered and analysed in detail, accounting for remarkable reductions in the equivalent CO{sub 2} emissions (up to 60%). These strategies would be focused on the use of renewable energies such as photovoltaic cells, the promotion of national fibres or changes in the materials used. Other alternatives to be implemented in the long term can be of potential interest for future developments.

  11. Cage-enrichment: rabbit does prefer straw or a compressed wooden block

    Directory of Open Access Journals (Sweden)

    Jorine M. Rommers

    2014-12-01

    Full Text Available The effect of different food related materials on the behaviour of commercial meat rabbit does was investigated to provide them enrichment. Five different treatments were tested. Control (pens without additional enrichment, C was compared with pens containing a pinewood stick (Pine, straw in a plastic bin (Straw, a compressed wooden block (Ply or a combination of straw and a pinewood stick (Straw+Pine. The experiment was conducted on a commercial rabbit farm using 80 cages with multiparous lactating hybrid (Hycole rabbit does. Behavioural observations were conducted in the first 4 wk of 2 successive lactations of 6 wk each, twice a week from 15:00 to 18:30 h. Once every week the consumption of gnawing materials and soiling of the cages was scored. More does were significantly occupied with Straw and Ply than with Pine (24±20, 11±9 and 4±3% of does, respectively for a longer duration (4±4, 2±2, 0.1±0.2% of observed time, respectively. In does of Straw+Pine group, the pinewood was barely touched and straw was preferred. It can be concluded that straw (loose material and wooden block are used by the animals as enrichment material to gnaw or chew on. The materials remain attractive for the 2 lactations which were measured. The pinewood stick as provided in this study was rarely used and it may be questioned whether it is sufficient as enrichment material or if it should be provided in another way than hanging on the roof of the cage. This study provides a first step towards a positive list of enrichment materials that can be used in commercial rabbit farming in The Netherlands.

  12. Architectural and Artistic Design of Wooden Iconostases in New and Restored Temples

    Science.gov (United States)

    Yudin, V.

    2017-11-01

    During various periods of the modern Russian history, religious architecture was viewed from different angles - at first, as a valuable fragment of a culture that had gone into oblivion, later - as a living tradition sprouting from ancient roots to the present and requiring reunification with it. Therefore, despite the obvious elaboration of the topic, the appeal to it does not lose its relevance turning in different facets of its aspects. The iconostasis is the most important architectural element of the church interior, a small likeness of the temple of heaven and earth. The planned destruction of iconostases in the Soviet era, violation of traditions, connections, continuity, lack of basic information on design, construction and technology of their production makes the study of wooden iconostases and the principles of their restoration and re-creation relevant and important for both theorists and practitioners of architecture, as well as restoration workshops. When reconstructing the monuments of the temple architecture, the architectural style is not always observed, therefore, an architectural and artistic appearance of a monument is violated. Besides, during the monument reconstruction the traditional features of the region in which the temple was located are not taken into account. This factor is the most important one because each region has its own traditional school of iconostases manufacturing and temples building. This article presents the results of the study on the design of the wooden iconostasis of the Church of the Intercession of the Virgin on the lower floor of the Savior’s Transfiguration Temple (1894), in the NizhneSinyachikha Museum Reserve taking into account regional peculiarities.

  13. Estimation the remaining service-lifetime of wooden structure of geothermal cooling tower

    Directory of Open Access Journals (Sweden)

    Effendi Tri Bahtiar

    2017-06-01

    Full Text Available Similar with other construction materials, wood strength is decreasing when applied by long term loading. Wooden cooling tower structure at Star Energy Geothermal (Wayang Windu Ltd was built in 1998 and it should be evaluated to avoid sudden structural failure. Evaluation conducted through several steps: wood species identification, the physical and mechanical properties testing, and estimation for remaining service-lifetime by generating mathematical models derived from creep test and reduction of cross sectional area of the wood. Identification result that the wood are redwood (Sequoia sempervirens and Douglas fir (Pseudotsuga menziesii. The wood density value has degraded from the surface until 0.25 cm depth. Strength characteristics of the wood have considerably decreased, but the allowable stress for bending, tension parallel to grain, and shear were still higher than NDS2005 requirements. The allowable stress for compression parallel to grain was slightly lower than NDS, while compression perpendicular to grain was much lower. Average modulus of elasticity reduces become lower than the value stated by the code, but the minimum value of modulus of elasticity (Emin of redwood was still higher than the code value, while Emin of Douglas fir is slightly lower. Then, in accordance with those findings, the construction would not failure yet but the deformation and vibration will occur in higher rate than design planning. This research develops mathematical models for estimating the remaining service-lifetime of the wooden cooling tower structure in geothermal power plant based on the wood performance in resisting long term loading and its deterioration rate. The deterioration rate of wood member of cooling tower structure at Star Energy Geothermal (Wayang Windu Ltd is 0.0147 cm depth per year, so equation for the residual service life estimation is σlaterσtoday=bh2(b−0.0147T(h−0.0147T2, and σlater must be lower than allowable stress.

  14. Assessing the global warming potential of wooden products from the furniture sector to improve their ecodesign.

    Science.gov (United States)

    González-García, Sara; Gasol, Carles M; Lozano, Raúl García; Moreira, María Teresa; Gabarrell, Xavier; Rieradevall i Pons, Joan; Feijoo, Gumersindo

    2011-12-01

    The main objective of this study was to determine the global warming potential of several wood products as an environmental criterion for their ecodesign. Two methodologies were combined: the quantification of greenhouse gas emissions (equivalent CO(2)) of several representative wood based products from the furniture sector and the integration of environmental aspects into product design. The products under assessment were classified in two groups: indoor products and outdoor products, depending on their location. "Indoor products" included a convertible cot/bed, a kitchen cabinet, an office table, a living room furniture, a headboard, youth room accessories and a wine crate, while the "Outdoor products" analysed were a ventilated wooden wall and a wooden playground. Spanish wood processing companies located in Galicia (NW Spain) and Catalonia (NE Spain) were analysed in detail. The life cycle of each product was carried out from a cradle-to-gate perspective according to Life Cycle Assessment (LCA) methodology, using global warming potential as the selected impact category. According to the results, metals, boards and energy use appeared to be the most contributing elements to the environmental impact of the different products under assessment, with total contributions ranging from 40% to 90%. Furthermore, eco-design strategies were proposed by means of the methodology known as Design for the Environment (DfE). Improvement strategies viable for implementation in the short term were considered and analysed in detail, accounting for remarkable reductions in the equivalent CO(2) emissions (up to 60%). These strategies would be focused on the use of renewable energies such as photovoltaic cells, the promotion of national fibres or changes in the materials used. Other alternatives to be implemented in the long term can be of potential interest for future developments. Copyright © 2011 Elsevier B.V. All rights reserved.

  15. Measurements of radon concentrations in dwelling houses

    International Nuclear Information System (INIS)

    Birkholz, W.; Klink, T.

    1993-01-01

    Radon and its daughter products gain in importance in health protection and radiation safety. Especially in the southern region of Saxony radon concentrations in dwellings may be high by former silver and uranium mines. We found radon contents of about 20.000 Bq/m 3 in dwellings. To redevelop such houses it is necessary to know intrude path of radon. In present work we studied different measuring systems, active and passive detectors, short and long term integrating devices. By means of investigation of radon sources several redeveloping methods are rates as well from radiological as from civil engineering point of view. (author)

  16. Survey of Ground Dwelling Arthropods Associated with Two Habitat ...

    African Journals Online (AJOL)

    Survey of Ground Dwelling Arthropods Associated with Two Habitat Types in the Jos ... in the mean abundance of ground dwelling arthropods in relation to taxa. ... Food availability and vegetation cover were found to be critical to arthropods ...

  17. Low frequency sounds in dwellings : A case control study

    NARCIS (Netherlands)

    van den Berg, Frits (G P)

    2000-01-01

    The purpose of this study is to systematically assess the level and spectral distribution of low frequency (LF) sounds in dwellings. Measurements of broad and narrow hand sound levels have been made in 36 Dutch dwellings in 1998. In 19 dwellings there were complaints about LF noise, in 17 others no

  18. Curriculum Making as the Enactment of Dwelling in Places

    Science.gov (United States)

    Ross, Hamish; Mannion, Greg

    2012-01-01

    This article uses an account of dwelling to interrogate the concept of curriculum making. Tim Ingold's use of dwelling to understand culture is productive here because of his implicit and explicit interest in intergenerational learning. His account of dwelling rests on a foundational ontological claim--that mental construction and representation…

  19. 24 CFR 203.38 - Location of dwelling.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Location of dwelling. 203.38... § 203.38 Location of dwelling. At the time a mortgage is insured there must be located on the mortgaged property one or more dwellings designed principally for residential use for not more than four families...

  20. 24 CFR 9.153 - Distribution of accessible dwelling units.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Distribution of accessible dwelling units. 9.153 Section 9.153 Housing and Urban Development Office of the Secretary, Department of Housing... dwelling units. Accessible dwelling units required by § 9.152 shall, to the maximum extent feasible, be...

  1. 24 CFR 8.26 - Distribution of accessible dwelling units.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Distribution of accessible dwelling units. 8.26 Section 8.26 Housing and Urban Development Office of the Secretary, Department of Housing... accessible dwelling units. Accessible dwelling units required by § 8.22, 8.23, 8.24 or 8.25 shall, to the...

  2. Radon measurements in mines and dwellings

    International Nuclear Information System (INIS)

    Urban, M.

    1985-01-01

    Radon measurements using a time integrating passive radon dosemeter (MAKROFOL track etch detector) have been performed in Brazilian and German mines and dwellings. The present state of the measurement technique is summarized. The results are presented together with exposure calculations and dose estimations for occupational exposure in open pit and underground mines and for the general public in houses. (orig./HP) [de

  3. Environmental impact of NORM in Israeli dwellings

    International Nuclear Information System (INIS)

    Neeman, E.; Steiner, V.

    2002-01-01

    In the last decade the construction of public dwellings in Israel has been intensified. New construction sites are being created and new construction materials, local or imported, are being used. Since the origin of the building materials is essentially the soil, they inherit the radioactive properties of the environment. The level of Natural Occurring Radioactive Materials (NORM),from the decay chains of the ubiquitous radio nuclides U 238 ,Th 232 ,U 235 and K 40 ,as well as artificial radioisotopes like Cs 137 ,in building materials needs to be controlled, in order to limit the gamma and Radon radiation dose of the general public in dwellings. The Ministry of the Environment collaborates with other institutions to evaluate, document and control the NORM content in our environment, based on international standards. The operation of quarries is controlled to ensure a low NORM content in raw building materials. The use of bottom and fly ash, abundantly produced in electrical power stations, in constructions is also being controlled. A new Israeli standard controls the NORM content in building materials such as to limit the radiation dose in dwellings from this practice to 0.45 mSv /year. Special construction solutions are developed and used in areas with high Radon concentration in the soil. The aim is to maintain the Radon concentration in dwellings below the Action Limit of 200 Bq/m 3

  4. Radon in your dwellings - problems and mitigation

    International Nuclear Information System (INIS)

    Srivastava, D.S.

    2011-01-01

    The problem of radon in dwellings gained importance in 1984 after the Stanely Watra's house incidence in Pennsylvania USA. Since then several radon measuring techniques have been identified and instrumentations developed. National survey programs were started for monitoring radon levels in dwellings by Government authorities in all developed and developing countries including India. Successively, the measurement of thoron levels was also found desirable especially in high radiation background areas. A lot of work has been done since then by scientists and university researches and thousands of publications have been made in this field. Several developed countries have given guide lines for initiating action to reduce radon levels in dwellings if it is beyond 200-400 Bq/m 2 . The recommended 'action level' is found to depend upon the authorities making the recommendations. This talk is aimed to produce public awareness about the health hazard posed by concentration of naturally occurring radon gas in our dwellings, the sources of its production and mitigation of radon problem. The matter will be discussed in a general way using ppt presentation. (author)

  5. The dwelling space of postnatal care.

    Science.gov (United States)

    Smythe, Elizabeth A; Payne, Deborah; Wilson, Sally; Wynyard, Sue

    2013-06-01

    This paper considers the dwelling space of postnatal care, how being-there feels for the woman going through the experience of matrescence. The research takes a hermeneutic approach and draws on philosophical notions from Heidegger. 'What is the nature of the dwelling space of valued postnatal care?'. Appropriate ethics approval was gained. Participants were midwives, nurses, women, and other relevant stakeholders. There were 4 focus groups involving 11 participants and 19 individual interviews. Data collection was conducted over a one week period by a team of three researchers. An interview schedule had been organised by the administrator at the Centre. Participants chose whether to come to the centre to be interviewed, or be interviewed in their own homes. Most interviews were an hour. All interviews were tape recorded and transcribed, with the participant's permission. Data was analysed through a hermeneutic process set in the context of related literature. When women are invited into a dwelling space that strengthens them they feel 'mothered': being listened to, have their needs anticipated, and are cared for in a loving manner. In such a way they grow confidence. A child health nurse reported the difference such care made to on-going mothering at home. All women deserve a dwelling space in their early days of matrescence. Small birthing centres perhaps achieve such care and ambience more easily than large institutional units. Nevertheless, wherever the place, practices need to be enabled that foster the spirit of dwelling. Copyright © 2012 Australian College of Midwives. Published by Elsevier Ltd. All rights reserved.

  6. 222Rn Measurements in Dwellings of Argentina

    International Nuclear Information System (INIS)

    Gnoni, G.; Canoba, A.; Czerniczyniec, M.

    2011-01-01

    Radon gas ( 222 Rn) is responsible of about fifty per cent of the world population dose due to natural sources, being the most important pathway the inhalation of radon progeny, specially indoors. Radon concentration has been measured in dwellings at different locations in Argentina. The places selected to be evaluated are representative of the different geologic zones of the country. Near 3000 dwellings have been analyzed since 1983 up today. The measuring methods used in this case were track etched detectors, electrets and detectors based on activated charcoal adsorption. Two different methods with track etched detectors were used: a simple one, which determines only the average radon concentration, and a second one that measures both radon concentration and the equilibrium factor (F) between radon and its daughters. The last one is a method that uses two Makrofol passive track detectors in the same device. The average radon concentration value obtained from all the dwellings evaluated was 44.2 Bq.m-3. The annual effective dose calculated from this average concentration, using a dosimetric factor of 25 μSv.a- 1. (Bq.m -3 ) -1 , which assumes an equilibrium factor of 0.4, was 1.11 mSv. The average value obtained from the 222 dwellings evaluated by the second method was 49.3 Bq.m -3 and 0,37 the equilibrium factor, resulting the annual effective dose estimated 1,44 mSv. The measured equilibrium factor of 0,37 allows us to verify the assumed equilibrium factor of 0,4. Finally, radon levels in dwellings of Argentina are within the acceptable values for population, not being necessary to implement remedial actions, except in isolate cases that are still under study. (authors)

  7. Effects of the combined action of axial and transversal loads on the failure time of a wooden beam under fire

    International Nuclear Information System (INIS)

    Nubissie, A.; Kingne Talla, E.; Woafo, P.

    2012-01-01

    Highlights: ► A wooden beam submitted to fire and axial and transversal loads is considered. ► The failure time is found to increase with the intensity of the loads. ► Implication for safety consideration is indicated. -- Abstract: This paper presents the variations of the failure time of a wooden beam (Baillonella toxisperma also called Moabi) in fire subjected to the combined effect of axial and transversal loads. Using the recommendation of the structural Eurocodes that the failure can occur when the deflection attains 1/300 of the length of the beam or when the bending moment attains the resistant moment, the partial differential equation describing the beam dynamics is solved numerically and the failure time calculated. It is found that the failure time decreases when either the axial or transversal loads increases.

  8. Design of strong wooden box coated with fiberglass reinforced resin for shipping and burial of contaminated glove boxes. Final report

    International Nuclear Information System (INIS)

    1982-01-01

    The project scope of work included the complete decontamination and decommissioning (D and D) of the Westinghouse ARD Fuel Laboratories at the Cheswick Site in the shortest possible time. This has been accomplished in the following four phases: (1) preparation of documents and necessary paperwork; packaging and shipping of all special nuclear materials in an acceptable form to a reprocessing agency; (2) decontamination of all facilities, glove boxes and equipment; loading of generated waste into bins, barrels and strong wooden boxes; (3) shipping of al bins, barrels and boxes containing waste to the designated burial site; removal of all utility services from the laboratories; and (4) final survey of remaining facilities and certification for nonrestricted use; preparation of final report. This attachment contains design of strong wooden box coated with fiberglass reinforced resin for shipping and burial of contaminated glove boxes

  9. Determination of the longitudinal modulus of elasticity in structural sawn wooden beams by the least squares method

    Directory of Open Access Journals (Sweden)

    André Luis Christoforo

    2012-12-01

    Full Text Available This paper proposes an alternative method of calculation based on the Least Squares Method to determine the longitudinal modulus of elasticity in structural-sized wooden beams. The developed equations require knowledge of three points of displacements, allowing greater reliability on the dependent variable when using the static four-point bending test. Using the Jatobá (Hymenaea sp wood in the study, the methodology proposed here was used in combination with a simplified one, requiring knowledge of displacement only at the midpoint of the beam in order to compare the results among them. Results show statistical equivalence between the models, indicating a good approximation of the simplified model for calculating the modulus of elasticity in wooden structural bending here evaluated.

  10. Yet one more dwell time algorithm

    Science.gov (United States)

    Haberl, Alexander; Rascher, Rolf

    2017-06-01

    The current demand of even more powerful and efficient microprocessors, for e.g. deep learning, has led to an ongoing trend of reducing the feature size of the integrated circuits. These processors are patterned with EUV-lithography which enables 7 nm chips [1]. To produce mirrors which satisfy the needed requirements is a challenging task. Not only increasing requirements on the imaging properties, but also new lens shapes, such as aspheres or lenses with free-form surfaces, require innovative production processes. However, these lenses need new deterministic sub-aperture polishing methods that have been established in the past few years. These polishing methods are characterized, by an empirically determined TIF and local stock removal. Such a deterministic polishing method is ion-beam-figuring (IBF). The beam profile of an ion beam is adjusted to a nearly ideal Gaussian shape by various parameters. With the known removal function, a dwell time profile can be generated for each measured error profile. Such a profile is always generated pixel-accurately to the predetermined error profile, with the aim always of minimizing the existing surface structures up to the cut-off frequency of the tool used [2]. The processing success of a correction-polishing run depends decisively on the accuracy of the previously computed dwell-time profile. So the used algorithm to calculate the dwell time has to accurately reflect the reality. But furthermore the machine operator should have no influence on the dwell-time calculation. Conclusively there mustn't be any parameters which have an influence on the calculation result. And lastly it should take a minimum of machining time to get a minimum of remaining error structures. Unfortunately current dwell time algorithm calculations are divergent, user-dependent, tending to create high processing times and need several parameters to bet set. This paper describes an, realistic, convergent and user independent dwell time algorithm. The

  11. Air supersaturation, release of wooden fibres and upstream migration of Atlantic salmon at Rygene power plant in the River Nidelva, Aust Agder county

    International Nuclear Information System (INIS)

    Thorstad, Eva B.; Kroglund, Frode; Oekland, Finn; Heggberget, Tor G.

    1997-01-01

    Incidents of dead fish have been reported in connection with a power plant at Rygene on the River Nidelva in the Aust-Agder county, Norway. Air supersaturation has been used in a bypass construction of the power plant tunnel system. In addition, wooden fibres from a fabric have been released into the water of the tunnel. Results from relevant studies concerning air saturation, wooden fibres and upstream migration are summarised in this report. 148 refs., 4 figs., 2 tabs

  12. The numerical assessment of a full-scale historical truss structure reconstructed with use of traditional all-wooden joints

    Czech Academy of Sciences Publication Activity Database

    Milch, J.; Tippner, J.; Sebera, V.; Kunecký, Jiří; Kloiber, Michal; Navrátil, M.

    2016-01-01

    Roč. 21, September-October (2016), s. 759-766 ISSN 1296-2074 R&D Projects: GA MK(CZ) DG16P02M026 Keywords : elastic behavior * finite element method * historical truss * substructuring * wooden joints Subject RIV: AL - Art, Architecture, Cultural Heritage Impact factor: 1.838, year: 2016 http://www.sciencedirect.com/science/article/pii/S1296207416300450

  13. The Effect of the Wooden Breast Myopathy on Sarcomere Structure and Organization.

    Science.gov (United States)

    Velleman, Sandra G; Clark, Daniel L; Tonniges, Jeffrey R

    2018-03-01

    The wooden breast (WB) has been classically identified by the phenotypic presence of a wood-like pectoralis major (p. major) muscle. The WB-affected p. major muscle is characterized by necrotic muscle fibers and the replacement of muscle with connective tissue, water, and fat. The objective of the current study was to determine the effect of the WB myopathy on sarcomere organization by transmission electron microscopy. Sarcomere structure and organization were examined in two broiler lines with a high incidence of WB (Lines A and B) and another broiler line without WB (Line C). Affected muscle had an increase in smaller myofibers with diameters of 20 μm or less. Sarcomere organization decreased with fiber diameter in both Lines A and B. The structure and organization of sarcomeres in Line C were similar to WB-unaffected muscle in Lines A and B. Taken together, these data demonstrate that the WB myopathy detrimentally affects sarcomere organization in a broiler line-specific manner. Disorganization of sarcomere structure will affect the function of the p. major muscle as well as meat quality.

  14. Materials used to build the wooden vault over the Plenary Hall in the Spanish Senate Buiding

    Directory of Open Access Journals (Sweden)

    Bustamante, R.

    2012-06-01

    Full Text Available The constituent materials used to build the wooden vault over the Plenary Hall in the Spain’s Senate Building (ca 1814-1820 are analyzed in this paper. Characteristics of gypsum mortar applied on pine beams, boards and blockboard, have been determined. The esparto (=needlegrass fibre provides a framework for the gypsum mortar to ensure adhesion and forming the surface of the dome. Physical-mechanical properties of the burnt clay-lightened gypsum mortars were determined with laboratory tests, while the composition of these materials was found with XRD,SEM and IR.

    En este artículo se analizan los materiales de la bóveda encamonada que cubre el Salón de Plenos del Senado de España (hacia 1814-1820. Se han determinado en particular las características físico-mecánicas del mortero de yeso aplicado sobre vigas, tablas y enlistonados de madera de pino, entomizados con fibra de esparto para asegurar la adherencia y conformar la superficie de la bóveda. Con los análisis de DRX, SEM e IR, se ha completado la caracterización del mortero que presenta adiciones de cerámica cocida.

  15. Wooden Breast Myodegeneration of Pectoralis Major Muscle Over the Growth Period in Broilers.

    Science.gov (United States)

    Sihvo, H-K; Lindén, J; Airas, N; Immonen, K; Valaja, J; Puolanne, E

    2017-01-01

    Wooden breast (WB) myopathy of broiler chickens is a myodegenerative disease of an unknown etiology and is macroscopically characterized by a hardened consistency of the pectoralis major muscle. Our aim was to describe the development and morphology of WB over the growth period in broilers. Additionally, the effect of restricted dietary selenium on the occurrence of WB was examined by allocating the birds in 2 dietary groups: restricted and conventional level of selenium. The experiment included 240 male broilers that were euthanized at ages of 10, 18, 24, 35, 38, or 42 days and evaluated for WB based on abnormal hardness of the pectoralis major muscle. The severity and the distribution of the lesion and presence of white striping were recorded. The first WB cases were seen at 18 days; 13/47 birds (28%) were affected and the majority exhibited a mild focal lesion. In subsequent age groups the WB prevalence varied between 48% and 73% and the lesion was usually diffuse and markedly firm. White striping often coexisted with WB. Histological evaluation performed on 111 cases revealed a significant association of myodegeneration and lymphocytic vasculitis with WB. Vasculitis and perivascular cell infiltration were restricted to the veins. Restricted dietary selenium did not affect the occurrence of WB ( P = .44). Our results indicate that WB starts focally and spreads to form a diffuse and more severe lesion.

  16. Synthesis and Characterization of Wooden Magnetic Activated Carbon Fibers with Hierarchical Pore Structures

    Directory of Open Access Journals (Sweden)

    Dongna Li

    2018-04-01

    Full Text Available Wooden magnetic activated carbon fibers (WMACFs with hierarchical pore structures were obtained by adding magnetic iron oxide (Fe3O4 nanoparticles into the liquefied wood. The structures and properties of WMACFs were analyzed by scanning electronmicroscopy (SEM, X-ray diffraction (XRD, Fourier transform infrared spectroscopy (FTIR, N2 adsorption, and vibrating sample magnetometer (VSM. The results showed that WMACFs had high Brunauer-Emmett-Teller (BET surface area (1578 m2/g and total pore volume (0.929 cm3/g, of which 45% was the contribution of small mesopores of 2–3 nm. It is believed that Fe3O4 nanoparticles play an important role in the formation of hierarchical pores. With the Fe3O4 content increasing, the yield rate of WMACFs decreased, and the Fe3O4 crystal plane diffraction peaks and characteristic adsorption peaks were obviously observed. At the same time, it was also found that WMACFs had favorable magnetic properties when the Fe3O4 content was above 1.5%. As a result, WMACFs could be a promising candidate for high efficiency, low cost, and convenient separation for the magnetic field.

  17. Toward structural mechanics through wooden bridges in France (1716-1841)

    CERN Document Server

    Tardini, Chiara

    2014-01-01

    Early applications of Navier’s beam theory to the rational design of structures are documented in the Annales of the French Ecole des Ponts et Chaussées and refer to the design of three wooden bridges built in France in the 1840's. Revisiting these examples, the book provides documentation on the progressive establishment of the new design approach, based on the theory of structural mechanics rather than empirical knowledge. The bridges concerned were built according to the structural scheme patented by Ithiel Town in the USA, witnessing the diffusion in Europe of the American advancements in bridge design, circulated by the travel reports of French engineers from the Ecole. Through the exam of French treatises discussing the progress of theoretical formulations in parallel with experimental findings in the 18th and 19th centuries, the book retraces as well the long path which led to the formulation of Navier’s theory. The relevant scientific debate dealt mainly with the specific case of wood bridges; th...

  18. Moisture problems of functional joints of wooden windows – causes analysis

    Directory of Open Access Journals (Sweden)

    Palková Adela

    2018-01-01

    Full Text Available The article addresses the issue of the humidity regimen of a functional wooden window joint. Current energy-saving trends in the buildings bring secondary effects associated with indoor climate change. Increase of the thermal-technical quantification, non-breathability, and diffusion resistance of the building envelope without the solution of controlled ventilation brings an extreme rise of the interior moisture. The passage of moisture through a functional joint is ensured mainly by exfiltration. The energy standard applicable after the year 2020 assumes buildings with almost zero energy need that cannot be reached without a recuperation system. The concept of the recuperation systems usually works as a pressure system, which increases the likelihood of exfiltration. Measurements done in a large climate chamber show that the diffusion of water vapor can overcome the infiltration flow of the outside air. The passage of moisture results in icing or condensation in the functional joint, which subsequently damages the surface treatment of the wood. Another serious defect is the subsequent mold growth.

  19. Quality of wooden chips produced by Claas Jaguar fitted with experimental CRA-ING rotor

    Energy Technology Data Exchange (ETDEWEB)

    Pari, L.; Civitarese, V.; Del Giudice, A. [Council for Research in Agriculture, Agricultural Engineering Research Unit, Rome (Italy)

    2010-07-01

    This paper described a newly developed chipper device for mounting on Claas Jaguar chipper harvesters for short rotation forestry harvesting. It was designed by the Agriculture Engineering Research Unit of the Agricultural Research Council in Rome, Italy. The new rotor has a lower number of blades compared to standard rotors and has a different cutting angle and drum insertion. This study evaluated the particle-size distribution of wood chips produced by standard rotors compared to those with the experimental rotor. The objective was to distinguish the particle size distribution of chips produced using the two types of chippers in order to evaluate the influence of wooden species in the chip formation process. Tests were conducted using 860 and 890 Claas Jaguar chipper harvesters, both equipped with standard and CRA-ING rotors. The experiment was conducted on poplar cultivations on biennial shift and on arboreal cultivations. Compared to traditional rotors, CRA-ING rotors provide a considerable product increase within particle sizes ranging from 12.5 to 25 mm, and an equivalent product reduction within the finest particle size classes. The study showed that the new rotor tends to concentrate dimensional increments along the longitudinal section of the chip, regardless of the species used. In order to obtain a better quality chip in terms of particle size, a second rotor was devised to engrave a cleaner cut on the biomass introduced by the feeding rollers.

  20. CREEP IN THE FUNDAMENTAL FREQUENCY AND STABILITY OF A SLENDER WOODEN COLUMN OF COMPOSITE SECTION

    Directory of Open Access Journals (Sweden)

    Alexandre de Macêdo Wahrhaftig

    Full Text Available ABSTRACT Creep is a phenomenon that can occur in wooden structures since wood is a viscoelastic material. Creep may change the purely elastic parameters determined in wood characterization initial tests, as its behavior depends on the rheology of the material, even under a constant stress level. Mathematically, creep can be characterized by models in which the immediate elastic deformation is increased by a viscous deformation, resulting in a temporal function. For this reason, the calculation of the natural frequency of vibration and the stability verification of a slender column should include the reducing effects of stiffness both of axial force and creep. The first one can be considered through the geometrical portion and the second one by the introduction, in the conventional portion, of a variable elasticity modulus over time, obtained in relation to the adopted rheological model. A numerical simulation was performed to evaluate the aspects above, considering a bar compressed by a force at the free end equivalent to 10% of the Euler critical force, plus its own weight, adopting a rheological model with three parameters for the variation of the elasticity modulus. The results show differences of 60% and 50% for the frequency and elasticity modulus, besides defining the exact instant of column collapse in the case of its non-observance.

  1. Stiffness Coefficients of Mortise and Tenon Joints used on Wooden Window Profiles

    Directory of Open Access Journals (Sweden)

    Milan Podlena

    2016-04-01

    Full Text Available Samples of corner joints of wooden rectangular windows, with widths of 78 and 92 mm, were used to determine the stiffness of tenon and mortise joints. Two series of samples were loaded statically in the angular plane of compression and tension, so that the bending moment could be derived. The objective of the experiment was to determine the existing correlations between the stiffness in maximum strength and the stiffness in the elastic area for both types of tests. After strength tests were carried out, the annual ring width of the samples was measured to determine whether this factor affects the stiffness of the joints. The results showed that there was a relatively strong correlation between the stiffness in the elastic area and the maximum load. A two-factor analysis of variance confirmed that the type of load did not affect the stiffness of the joint, but the type of joint (width does significantly affect the stiffness. Therefore, the width of annual rings was positively correlated with the stiffness of the joints.

  2. Rice straw-wood particle composite for sound absorbing wooden construction materials.

    Science.gov (United States)

    Yang, Han-Seung; Kim, Dae-Jun; Kim, Hyun-Joong

    2003-01-01

    In this study, rice straw-wood particle composite boards were manufactured as insulation boards using the method used in the wood-based panel industry. The raw material, rice straw, was chosen because of its availability. The manufacturing parameters were: a specific gravity of 0.4, 0.6, and 0.8, and a rice straw content (10/90, 20/80, and 30/70 weight of rice straw/wood particle) of 10, 20, and 30 wt.%. A commercial urea-formaldehyde adhesive was used as the composite binder, to achieve 140-290 psi of bending modulus of rupture (MOR) with 0.4 specific gravity, 700-900 psi of bending MOR with 0.6 specific gravity, and 1400-2900 psi of bending MOR with a 0.8 specific gravity. All of the composite boards were superior to insulation board in strength. Width and length of the rice straw particle did not affect the bending MOR. The composite boards made from a random cutting of rice straw and wood particles were the best and recommended for manufacturing processes. Sound absorption coefficients of the 0.4 and 0.6 specific gravity boards were higher than the other wood-based materials. The recommended properties of the rice straw-wood particle composite boards are described, to absorb noises, preserve the temperature of indoor living spaces, and to be able to partially or completely substitute for wood particleboard and insulation board in wooden constructions.

  3. Ultrasound guided percutaneous removal of wooden foreign bodies in the extremities with hydro-dissection technique

    Energy Technology Data Exchange (ETDEWEB)

    Park, HeeJin; Lee, So Yeon; Chung, Eun Chul; Rho, Myung Ho [Dept. of Radiology, Sungkyunkwan University School of Medicine, Kangbuk Samsung Hospital, Seoul (Korea, Republic of); Lee, Sung Moon; Son, Eun Seok [Dongsan Medical Center, Keimyung University School of Medicine, Daegu (Korea, Republic of); Lee, Sun Joo [Dept. of Radiology, Inje University College of Medicine, Busan Paik Hospital, Busan (Korea, Republic of)

    2015-12-15

    We described the technique of ultrasound (US)-guided percutaneous removal of the foreign bodies (FB) with hydro-dissection in the radiologic department and presented video files of several cases.Four patients referred to the radiology department for US evaluation and US-guided percutaneous removal of the FBs in the upper and lower extremities between November, 2006 and November, 2013 were included in this study. The procedures started with US evaluation for the exact location and shape of the FB. A 5 mm-sized skin incision was made at the site of the nearest point from the FB where no passing arteries or tendons were present. We adopted a hydro dissection technique to separate the FB from adjacent tissue using a 2% lidocaine solution. Injected anesthetics detached the FBs from surrounding tissue and thereby facilitated removal. After the tip of the mosquito forceps reached the FB, the wooden FBs were removed. The mean time required for the entire procedure was approximately 20 minutes. There were no significant complications during the US-guided removal or long-term complications after the procedure. All 4 FBs were successfully removed from the soft tissue under US guidance. Ultrasound-guided percutaneous removal of the FBs with hydro-dissection in the radiology department is a less invasive and safe method over surgical removal in the operating room. Additionally, the use of a guide wire and serial dilator may help minimize soft tissue injury and facilitate the introduction of forceps.

  4. Phenolic and Aroma Composition of White Wines Produced by Prolonged Maceration and Maturation in Wooden Barrels

    Directory of Open Access Journals (Sweden)

    Nikolina Jedrejčić

    2015-01-01

    Full Text Available To investigate the phenolic and aroma composition of Malvazija istarska (Vitis vinifera L. white wines produced by an unconventional technology comprising prolonged maceration followed by maturation in wooden barrels, representative samples were subjected to analysis by UV/Vis spectrometry, high-performance liquid chromatography, and gas chromatography-mass spectrometry. When compared to standard wines, the investigated samples contained higher levels of dry extract, volatile acidity, lactic acid, phenols, colour intensity, antioxidant activity, majority of monoterpenes, C13-norisoprenoids, methanol, higher alcohols, ethyl acetate, branched-chain esters and esters of hydroxy and dicarboxylic acids, ethylphenols, furans, and acetals, as well as lower levels of malic acid, β-damascenone, straight-chain fatty acids, ethyl and acetate esters. It was estimated that maceration had a stronger influence on phenols, and maturation on volatile aromas. Despite different vintages and technological details, the investigated wines showed a relative homogeneity in the composition, representing a clear and distinctive type.

  5. Evaluation of impact factors on VOC emissions and concentrations from wooden flooring based on chamber tests

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Chi-Chi [Department of Civil and Environmental Engineering, National University of Kaohsiung, No. 700, Kaohsiung University Rd., Kaohsiung (China); Yu, Kuo-Pin [Institute of Environmental and Occupational Health Sciences, National Yang-Ming University, No.155, Sec.2, Linong Street, Taipei (China); Zhao, Ping [Filtration Group Inc., 912 E. Washington Street, Joliet, IL 60433 (United States); Whei-May Lee, Grace [Graduate Institute of Environmental Engineering, National Taiwan University, 71, Chou-Shan Rd., Taipei (China)

    2009-03-15

    In this study, the impact factors of temperature, relative humidity (RH), air exchange rate, and volatile organic compound (VOC) properties on the VOC (toluene, n-butyl acetate, ethylbenzene, and m,p-xylene) specific emission rates (SERs) and concentrations from wooden flooring were investigated by chamber test for 8 days. The tested wood in this study is not common solid wood, but composite wood made of combined wood fibers. The experiments were conducted in a stainless-steel environmental test chamber coated with Teflon. The experimental results within 8 days of testing showed that, when the temperature increased from 15 to 30 C, the VOC SERs and concentrations increased 1.5-129 times. When the RH increased from 50% to 80%, the VOC concentrations and SERs increased 1-32 times. When the air change rate increased from 1 to 2 h{sup -1}, the VOC concentrations decreased 9-40%, while the VOC SERs increased 6-98%. The relations between the boiling points of the VOCs and each of the normalized VOC SERs and concentrations were linear with negative slopes. The relations between the vapor pressures of the VOCs and each of the normalized VOC SERs and concentrations were linear with positive slopes. At 15 C, RH50%, the relations between the diffusivities of VOCs and each of the normalized VOC equilibrium SERs and concentrations were linear with a positive slope. (author)

  6. Informal Education of Adults in the Land of WoodenWare

    Directory of Open Access Journals (Sweden)

    Bojan Žnidaršič

    1997-12-01

    Full Text Available The fundamental aim of the project entitled the Land of Wooden Ware is developing a healthy environment and improving the conditions of life and work in rural areas. The project covers topographically varied, scarcely populated and demographically endangered areas in 11 municipalities (around 140,000 hectares. With respect to various standards, the entire expanse is a homogeneous region. Through a holistic approach, including education for permanent progress, direct expert help and other forms of help, the project aims to change the nega tive demographic curve and preserve the environment. The practical method used to achieve the goals set is direct work with people. The introductory phase includes exhibitions, articles in local and national media, etc., and will be followed by an extensive opinion poll among households. The results will serve as the basis for the preparation of lectures and workshops. The educational phase will dose with a study circle which will provide deeper insight into the subject. The entire effort (which includes the inhabitants, the municipality and VITRA is based on the desire to present rural regions as business opportunities for eco­farming, ecotourism, efficient use of renewable sources of energy, etc.

  7. Temporal Architecture: Poetic Dwelling in Japanese buildings

    Directory of Open Access Journals (Sweden)

    Michael Lazarin

    2014-07-01

    Full Text Available Heidegger’s thinking about poetic dwelling and Derrida’s impressions of Freudian estrangement are employed to provide a constitutional analysis of the experience of Japanese architecture, in particular, the Japanese vestibule (genkan. This analysis is supplemented by writings by Japanese architects and poets. The principal elements of Japanese architecture are: (1 ma, and (2 en. Ma is usually translated as ‘interval’ because, like the English word, it applies to both space and time.  However, in Japanese thinking, it is not so much an either/or, but rather a both/and. In other words, Japanese architecture emphasises the temporal aspect of dwelling in a way that Western architectural thinking usually does not. En means ‘joint, edge, the in-between’ as an ambiguous, often asymmetrical spanning of interior and exterior, rather than a demarcation of these regions. Both elements are aimed at producing an experience of temporality and transiency.

  8. Monitoring of radon concentration in dwellings

    International Nuclear Information System (INIS)

    Kurosawa, Ryuhei

    1991-01-01

    Radon problems in dwellings have recently received much attention. Radon concentration in dwellings, as well as in the general environment, varies with various factors such as meteorological conditions and soil components. Therefore, a long term monitoring of radon concentration is required to obtain an average concentration. This paper reviews a passive type radon monitor that is handy and allows a long term radon monitoring. It provides the structure and principle of the radon monitor, covering the type, filter function, sensitivity of diffusion collecting type (cup type), electrostatic collecting type, adsorption collecting type, and detector of radon monitor. Actual examples of the radon monitor are also given. Radon daughter nuclides will have become major foci of exposure countermeasures. In the future, the development of a passive type monitor for determining potential alpha energy concentration is required. (N.K.)

  9. Indoor radon measurements in dwellings of Mizoram

    International Nuclear Information System (INIS)

    Lalramengzami, R.; Laldawngliana, C.; Sinha, D.; Ghosh, S.; Dwivedi, K.K.

    1995-01-01

    The concentration of indoor radon has been measured in some dwellings of Mizoram state by employing time integrated method using solid state nuclear track detector. This state is located in the north eastern region of India which has been identified as a high background area. The indoor radon levels determined in this work are compared with data obtained from other regions of India and the Environmental Protection Agency (EPA) prescribed safe limit. (author). 7 refs., 2 figs

  10. Uncertainty analysis of energy consumption in dwellings

    Energy Technology Data Exchange (ETDEWEB)

    Pettersen, Trine Dyrstad

    1997-12-31

    This thesis presents a comprehensive study of an energy estimation model that can be used to examine the uncertainty of predicted energy consumption in a dwelling. The variation and uncertainty of input parameters due to the outdoor climate, the building construction and the inhabitants are studied as a basis for further energy evaluations. The occurring variations of energy consumption in nominal similar dwellings are also investigated due to verification of the simulated energy consumption. The main topics are (1) a study of expected variations and uncertainties in both input parameters used in energy consumption calculations and the energy consumption in the dwelling, (2) the development and evaluation of a simplified energy calculation model that considers uncertainties due to the input parameters, (3) an evaluation of the influence of the uncertain parameters on the total variation so that the most important parameters can be identified, and (4) the recommendation of a simplified procedure for treating uncertainties or possible deviations from average conditions. 90 refs., 182 figs., 73 tabs.

  11. Surveying dwellings with high indoor radon levels: a BRE guide to remedial measures in existing dwellings

    International Nuclear Information System (INIS)

    Scivyer, C.R.

    1993-01-01

    This report is one of a series giving practical advice on methods of reducing radon levels in existing dwellings. It is aimed specifically at builders, surveyors and building specialists surveying for and prescribing remedial measures for dwellings. It supplements guidance available in The householders' guide to radon obtainable from local environmental health officers or from the Department of the Environment. The report has been prepared on the basis of experience gained in remedial work on more than 100 dwellings following advice given by BRE, and of discussions with others in the field, notably the National Radiological Protection Board (NRPB) and Cornwall County Council. Work is continuing, particularly dealing with suspended timber floors, basements and ventilation systems. Results will be incorporated into revisions of this report as they become available. (Author)

  12. Radon in Finnish dwellings. Sample survey 2006

    International Nuclear Information System (INIS)

    Maekelaeinen, I.; Kinnunen, T.; Reisbacka, H.; Valmari, T.; Arvela, H.

    2009-12-01

    Indoor radon concentration was measured in 2882 dwellings randomly selected by the Population Register Centre of Finland. Radon measurements were made in two half-year periods, the first one lasting from April to November 2006 and the second one from November 2006 to April 2007. Measurements were made using STUK's alpha track detectors. According to the decree 944 / 92 by the Ministry of Social Affairs and Health, the indoor radon concentration should not exceed the 400 Bq /m 3 , whereas new buildings should be built so that 200 Bq /m 3 is not exceeded. In addition, the part D2 of the National Building Code of Finland (Indoor climate and ventilation of buildings) sets 200 Bq /m 3 as a reference value for planning of new buildings. Since 2004, according to the regulation B3 (Foundations), radon should be taken into account in new building in the whole country. A radon technical plan should be included into the building licence application. This plan can be exceptionally ignored only when building in areas where exceeding of 200 Bq / m 3 seldom occurs. In this study the nationwide means weighted by number of inhabitants in provinces in houses and flats were 121 Bq /m 3 and 49 Bq /m 3 , and 96 Bq /m 3 for all dwellings. The percentages of dwellings exceeding 200 Bq /m 3 for houses and flats were 15.1% and 1.5%, and 10.4% for all dwellings. The respective values for the reference value 400 Bq/m 3 were 3.8%, 0.7%, and 2.7%. The numbers of dwellings exceeding 200 Bq /m 3 were 204 000 for houses and 16 000 for flats, respectively. The respective numbers of dwellings exceeding 400 Bq /m 3 were 51 000 and 8.000. The highest radon concentrations were measured in the areas of Tavastia and South-Eastern Finland, in the provinces Eastern Uusimaa, Kymenlaakso, Paeijaenne Tavastia, Tavastia Proper, Pirkanmaa and South Karelia. In these provinces 29 - 51 per cent of small houses exceed 200 Bq /m 3 . The lowest radon concentrations were achieved with a crawl space foundation. Radon

  13. The principles of radon remediation and protection in UK dwellings

    International Nuclear Information System (INIS)

    Woolliscroft, M.

    1992-01-01

    This paper describes the principles of radon remediation and protection in UK dwellings. It states briefly why and how radon gets into dwellings and the main methods of remediation and protection; sealing, pressurisation, sub-floor ventilation, sub-floor depressurisation and, more problematically, ventilation of the dwelling. It goes on to discuss the effectiveness of the methods and why some methods are more or less effective than others. Data is presented on the effectiveness of protection in new dwellings. Solutions for existing dwellings are discussed and the remaining issues which are the subject of ongoing research are described. It is concluded that in general radon protection and remediation in new and the great majority of existing dwellings can be achieved simply and cheaply. (Author)

  14. Design of Information Collecting System Towards The Song Dynasty Wooden Hall of Baoguo Temple, Ningbo

    Directory of Open Access Journals (Sweden)

    S. He

    2015-09-01

    Full Text Available Baoguo Temple is located half way up Lingshan Mountain in Northern Ningbo, Zhejiang Province, China. The main hall of Baoguo Temple is Song dynasty wooden structure. As the oldest wooden architecture in Jiangnan, China, it is a national major protective historical relic. In 2005, Baoguo Temple Ancient Architecture Museum was set up and opens to the outside world. From 2007, to be able to protect it more effectively and foreseeably, Baoguo Temple Ancient Architecture Museum began to build information collecting systems towards historical architectures using modern information technology. After comparing correlated studies both at home and abroad, we found that: heritage protection abroad started earlier than us, and it has already established thorough protection system, relevant protection mechanism, and also issued relevant protection laws and regulations. The technology which was utilized in protection abroad was not only limited in RS, GIS, GPS, VR, but also included many emerging technology such as using a computational fluid dynamics model to simulate the condition of temperature and humidity. The main body of this paper are going to talk about four parts: the first one is existing information system. In this part, we’ll introduce the information collecting system, which was preliminarily built in 2007 in Baoguo Temple Ancient Architecture Museum. Using the modern digital computer information technology, researchers can gradually check and acquire the information of the material of relics, the condition of the structure stress and the natural environmental information, which may probably affect the cultural architecture. And this part may be divided into information collection, information management and exhibition. The second part is update scheme design of original information collecting equipment and technology. Original information collecting system of microenvironment is relatively independent and data haven’t been included in the

  15. Design of Information Collecting System Towards The Song Dynasty Wooden Hall of Baoguo Temple, Ningbo

    Science.gov (United States)

    He, S.; Tang, Z.; Yang, S.

    2015-09-01

    Baoguo Temple is located half way up Lingshan Mountain in Northern Ningbo, Zhejiang Province, China. The main hall of Baoguo Temple is Song dynasty wooden structure. As the oldest wooden architecture in Jiangnan, China, it is a national major protective historical relic. In 2005, Baoguo Temple Ancient Architecture Museum was set up and opens to the outside world. From 2007, to be able to protect it more effectively and foreseeably, Baoguo Temple Ancient Architecture Museum began to build information collecting systems towards historical architectures using modern information technology. After comparing correlated studies both at home and abroad, we found that: heritage protection abroad started earlier than us, and it has already established thorough protection system, relevant protection mechanism, and also issued relevant protection laws and regulations. The technology which was utilized in protection abroad was not only limited in RS, GIS, GPS, VR, but also included many emerging technology such as using a computational fluid dynamics model to simulate the condition of temperature and humidity. The main body of this paper are going to talk about four parts: the first one is existing information system. In this part, we'll introduce the information collecting system, which was preliminarily built in 2007 in Baoguo Temple Ancient Architecture Museum. Using the modern digital computer information technology, researchers can gradually check and acquire the information of the material of relics, the condition of the structure stress and the natural environmental information, which may probably affect the cultural architecture. And this part may be divided into information collection, information management and exhibition. The second part is update scheme design of original information collecting equipment and technology. Original information collecting system of microenvironment is relatively independent and data haven't been included in the management of the system

  16. Descriptive sensory analysis of marinated and non-marinated wooden breast fillet portions.

    Science.gov (United States)

    Maxwell, A D; Bowker, B C; Zhuang, H; Chatterjee, D; Adhikari, K

    2018-05-14

    The wooden breast (WB) myopathy influences muscle composition and texture characteristics in broiler breast meat. It is unknown if marination reduces the negative influence of WB on meat sensory quality or if WB effects are uniform throughout the Pectoralis major. The objective of this study was to determine the effects of marination on the sensory attributes and instrumental shear force measurements of the ventral (skin-side) and dorsal (bone-side) portions of normal and severe WB meat. Sixty butterfly fillets (30 normal and 30 severe WB) were selected from the deboning line of a commercial processing plant. Individual fillets were portioned into ventral and dorsal halves. Portions from one side of each butterfly were used as non-marinated controls, and portions from the other side were vacuum-tumble marinated (16 rpm, -0.6 atm, 4°C, 20 min) with 20% (wt/wt) marinade to meat ratio. Marinade was formulated to target a concentration of 0.75% (w/v) salt and 0.45% (w/v) sodium tripolyphosphate in the final product. Descriptive sensory analysis (9 trained panelists) was conducted to evaluate visual, texture, and flavor attributes (0-15 point scale) of breast portions along with Warner-Bratzler shear force. Significant interaction effects between WB and marination were not observed for the sensory attributes. Greater springiness, cohesiveness, hardness, fibrousness, and chewiness scores were observed in WB samples (P sensory texture attributes were more apparent in the ventral portions of the breast fillets. Flavor attributes (salty and brothy) increased (P sensory quality is not uniform throughout the Pectoralis major and that WB-related differences in cooked meat sensory texture attributes are lessened but not eliminated by vacuum-tumbling marination.

  17. Wooden Bay Window (Rowshan Conservation in Saudi-Hejazi Heritage Buildings

    Directory of Open Access Journals (Sweden)

    A. A. Adas

    2013-07-01

    Full Text Available A prominent feature of the architectural style of heritage buildings in western Saudi Arabia (Hijaz cities such as Jeddah is the extensive use in their facades of projected intricately carved wooden bay window (Rowshan sl, Rawasheen pl. Throughout Balad or the old town in Jeddah, the element of Rowshan can be found made from many different types of woods such as teak, Javan, mahogany, other types of african and middle eastern woods and with different sizes, proportions, and varied intricate ornamentations and motifs. Besides its aesthetic value, the rawasheen and their many components and parts provide other functions such as ventilation, lighting, and spatial and visual privacy for building interiors from the outside. The profound degradation of Rawasheen is impacting the authenticity and heritage value of old buildings in historical Jeddah because of many factors that include: extensive moisture damage, using improper repair methods and joinery techniques to maintain rawasheen, using unsuitable cleaning products and wood paints, and replacing damaged parts with unkown types of wood. In order to prevent any further deterioration of Rawasheen, documentation of rawasheen and its components using recent digital methodologies and the utilization of proper repair techniques must be followed when working with these elements to ensure longevity of conservation, and preservation of value and authenticity.Through the disucssion of Rowshan repair methodology that was developed that include the digital documentation of all intricate details of rowshan panels and wood engraving which allowed replicating damaged elements beyond repair and applied to a listed building in old Jeddah, the paper provides Rowshan repair guidelines which relate to documentation, diagnostic methods, investigations and tests, repair methodology and reinforcement.

  18. Radon in dwellings in Northern Ireland. 1993 review

    International Nuclear Information System (INIS)

    Green, B.; Lomas, P.; O'Riordan, M.

    1993-01-01

    Measurements of radon made in some 1500 dwellings throughout Northern Ireland by the autumn of 1993 show that the average concentration is 19 Bq m -3 with some values up to fifty times higher. Around 30 of these dwellings are above the Action Level of 200 Bq m -3 adopted by the Government. Data are presented in considerable detail and various forms. Several hundred dwellings in Northern Ireland are estimated to exceed the Action Level, most of which are in a separately designated Affected Area in the southeast. Recommendations are made to promote the discovery and remedy of dwellings above the Action Level throughout Northern Ireland. (author)

  19. Dismantling the dwelling : A systematic approach to investigating the meaning of the dwelling: draft

    NARCIS (Netherlands)

    Meesters, J.; Coolen, H.C.C.H.

    2009-01-01

    The meaning of the dwelling consists of multiple layers, which makes it a complex concept. Therefore it should be dismantled (ref. Rapoport, 2001). This paper presents a conceptual framework in which settings, activities and values are systematically related. The data is derived from a telephone

  20. Modelling window opening behaviour in Danish dwellings

    DEFF Research Database (Denmark)

    Andersen, Rune Vinther; Olesen, Bjarne W.; Toftum, Jørn

    2011-01-01

    In this paper we present and analyse data from two studies of window opening behaviour in residential buildings in Denmark. Based on measurements of indoor environment, weather and window opening behaviour in 15 dwellings, we propose a model that will predict window opening behaviour. The data...... showed that other factors than thermal effects impact the behaviour of the occupants. Some of these factors were included in the model. We present data from repeated questionnaire surveys that show that occupants tend to adjust heating setpoints, adjust clothing and operate windows when feeling thermally...

  1. Extracellular fluid management and hypertension in urban dwelling versus rural dwelling hemodialysis patients.

    Science.gov (United States)

    Tonelli, Marcello; Lloyd, Anita; Pannu, Neesh; Klarenbach, Scott; Ravani, Pietro; Jindal, Kailash; MacRae, Jennifer; Unsworth, Larry; Manns, Braden; Hemmelgarn, Brenda

    2018-02-01

    Rural-dwelling hemodialysis patients have less frequent contact with nephrologists than urban-dwelling patients, and are known to have higher mortality. We hypothesized that rural-dwelling hemodialysis patients would have more evidence of poorly controlled extracellular fluid volume (ECVF) than otherwise similar urban-dwellers. We studied prevalent hemodialysis patients within a single renal program in Alberta, Canada and assessed ECFV using bioimpedance spectroscopy (BIS). Our primary outcome was impedance vector length (ohm/m) as assessed by BIS using the Xitron Hydra 4200 device, where shorter vector length indicated poorer ECFV control. Because poor ECFV control can lead to hypertension, we also assessed pre- and post-dialysis blood pressure. We measured outcomes at baseline. We studied 228 hemodialysis patients, of whom 115 (50.4 %) and 113 (49.6 %) were urban- and rural-dwelling, respectively. There were no differences in volume control in urban versus rural participants; odds ratio (OR) for vector length in the lowest sex-specific quartile of vector length was 0.93 (95 % CI 0.54, 1.59) after adjusting for age, sex, diabetic status, years since dialysis initiation and phase angle. The odds of very poor blood pressure control (pre-dialysis blood pressure ≥180/100) did not differ between urban and rural participants [fully adjusted OR 0.96 (0.36, 2.60)]. Differences in ECFV control do not appear to explain higher mortality among remote- and rural- dwelling hemodialysis patients, compared to urban-dwellers.

  2. The potential and need for energy saving in standard family detached and semi-detached wooden houses in arctic Greenland

    DEFF Research Database (Denmark)

    Bjarløv, Søren Peter; Vladyková, Petra

    2011-01-01

    The paper gives an account of the potential and need for energy saving in standard family detached and semi-detached wooden houses in Greenland. It is based on studies of house construction compared with Building Regulation requirements and the spread of buildings over time. In the climatic...... conditions of Greenland, there is considerable potential for energy saving in houses due to their construction, shape and condition. To estimate the total potential for energy saving and thus reducing CO2 emissions, we carried out a detailed investigation of three typical standard semi-detached family houses...

  3. Locating and limiting radon in dwellings

    International Nuclear Information System (INIS)

    Hildingson, O.; Gustafsson, J.; Nilsson, I.

    1984-01-01

    More than 3,300 Swedish dwellings have an indoor radon daughter concentration above 400 Bq.m -3 (or 0.108 WL). It is considered to be unsafe to live in any of these dwellings and the radon daughter concentration has to be reduced. Before deciding what measures to take, it is important to determine the radon sources. Possible sources are exhalation from building materials and/or radon transport from the ground into the building through cracks and joints in the slab. Different methods of locating the sources have been developed. To locate cracks and joints in slabs the ventilation rate and the air pressure difference relative to the ground are changed while monitoring radon/radon daughter concentration. The effect of five different measures to reduce the indoor radon daughter concentration have also been evaluated: increased ventilation rate by mechanical ventilation, ventilation of the small spaces between the floor and the slab, sealing the surface of radon exhaling walls, sealing joints and cracks in the slab, and ventilation of the drainage under the slab. (author)

  4. Positions of human dwellings affect few tropical diseases near ...

    African Journals Online (AJOL)

    user

    Some factors that possibly affect tropical disease distribution was investigated in about 500 randomize human dwellings. The studied factors include wild animals, domestic animals, wild plants, cultivated plants, nature of soil, nature of water, positions of human dwellings, nature of building material and position of animal ...

  5. Pinyon pine mortality alters communities of ground-dwelling arthropods

    Science.gov (United States)

    Robert J. Delph; Michael J. Clifford; Neil S. Cobb; Paulette L. Ford; Sandra L. Brantley

    2014-01-01

    We documented the effect of drought-induced mortality of pinyon pine (Pinus edulis Engelm.) on communities of ground-dwelling arthropods. Tree mortality alters microhabitats utilized by ground-dwelling arthropods by increasing solar radiation, dead woody debris, and understory vegetation. Our major objectives were to determine (1) whether there were changes in...

  6. Positions of human dwellings affect few tropical diseases near ...

    African Journals Online (AJOL)

    user

    for the sandflies which is the vector of visceral leishmaniasis. It seems that the effect of microclimate was not on the considerations of villagers to build their dwellings as the very dense of date palms trees, vegetable farms and irrigation canals which are a determinant factors in the prevalence of diseases. Some dwellings ...

  7. 7 CFR 1924.259 - Handling dwelling construction complaints.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 12 2010-01-01 2010-01-01 false Handling dwelling construction complaints. 1924.259 Section 1924.259 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING... Construction Defects § 1924.259 Handling dwelling construction complaints. This section describes the procedure...

  8. 7 CFR 1944.424 - Dwelling construction and standards.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 13 2010-01-01 2009-01-01 true Dwelling construction and standards. 1944.424 Section 1944.424 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE....424 Dwelling construction and standards. All construction will be performed in accordance with subpart...

  9. 24 CFR 9.154 - Occupancy of accessible dwelling units.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Occupancy of accessible dwelling units. 9.154 Section 9.154 Housing and Urban Development Office of the Secretary, Department of Housing... dwelling units. (a) The agency shall adopt suitable means to assure that information regarding the...

  10. 24 CFR 990.145 - Dwelling units with approved vacancies.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Dwelling units with approved vacancies. 990.145 Section 990.145 Housing and Urban Development Regulations Relating to Housing and Urban...; Computation of Eligible Unit Months § 990.145 Dwelling units with approved vacancies. (a) A PHA is eligible to...

  11. 24 CFR 8.27 - Occupancy of accessible dwelling units.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Occupancy of accessible dwelling units. 8.27 Section 8.27 Housing and Urban Development Office of the Secretary, Department of Housing... accessible dwelling units. (a) Owners and managers of multifamily housing projects having accessible units...

  12. The meaning of dwelling features : Conceptual and methodological issues

    NARCIS (Netherlands)

    Coolen, H.C.C.H.

    2008-01-01

    This study is about the meaning of dwelling features. It relates the research areas of housing preferences and the meaning of a dwelling with each other and with aspects of the means-end approach as applied in marketing research. It results in a conceptual and methodological framework for studying

  13. 24 CFR 990.140 - Occupied dwelling units.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Occupied dwelling units. 990.140 Section 990.140 Housing and Urban Development Regulations Relating to Housing and Urban Development... Eligible Unit Months § 990.140 Occupied dwelling units. A PHA is eligible to receive operating subsidy for...

  14. Train Dwell Time Models for Rail Passenger Service

    Directory of Open Access Journals (Sweden)

    San Hor Peay

    2016-01-01

    Full Text Available In recent years, more studies had been conducted about train dwell time as it is a key parameter of rail system performance and reliability. This paper draws an overview of train dwell time models for rail passenger service from various continents, namely Asia, North America, Europe and Australia. The factors affecting train dwell time are identified and analysed across some rail network operators. The dwell time models developed by various researches are also discussed and reviewed. Finally, the contributions from the outcomes of these models are briefly addressed. In conclusion, this paper suggests that there is a need to further study the factors with strong influence upon dwell time to improve the quality of the train services.

  15. Sound classification of dwellings in the Nordic countries

    DEFF Research Database (Denmark)

    Rindel, Jens Holger; Turunen-Rise, Iiris

    1997-01-01

    be met. The classification system is based on limit values for airborne sound insulation, impact sound pressure level, reverberation time and indoor and outdoor noise levels. The purpose of the standard is to offer a tool for specification of a standardised acoustic climate and to promote constructors......A draft standard INSTA 122:1997 on sound classification of dwellings is for voting as a common national standard in the Nordic countries (Denmark, Norway, Sweden, Finland, Iceland) and in Estonia. The draft standard specifies a sound classification system with four classes A, B, C and D, where...... class C is proposed as the future minimum requirements for new dwellings. The classes B and A define criteria for dwellings with improved or very good acoustic conditions, whereas class D may be used for older, renovated dwellings in which the acoustic quality level of a new dwelling cannot reasonably...

  16. Durability study on material of wooden panel elements used for the old living hut built in 1969 at Syowa Station, Antarctica

    Directory of Open Access Journals (Sweden)

    Toshimasa Konishi

    2002-09-01

    Full Text Available The purpose of this study is to determine the durability of the old living hut built in 1969 at Syowa Station, Japan's permanent Antarctic observation facility, especially of its wooden panels. The hut, of high floor type wooden panel construction, was built in January 1969. To determine the durability, part of the hut, which was brought back to Japan after 30 years, was rebuilt, then taken apart again under controlled test conditions. Tests included visual observation, testing of the wooden material, and testing of the performance of the thermal insulation material. The results showed that the material in the roof panels deteriorated considerably more than that in the walls and floors. In the severe polar conditions, the strength of the overall structure depends heavily on the joints between panels. It is clear that material on the indoor sides, and in the interiors of the panels, hardly deteriorated at all after 30 years.

  17. Simulating occupant behaviour and energy performance of dwellings : A sensitivity analysis of presence patterns in different dwelling types

    NARCIS (Netherlands)

    Bedir, M.; Harputlugil, G.U.

    2011-01-01

    Influence of occupant behaviour on the energy performance of dwellings is an emerging research topic: Not only the amount of studies is insufficient, but also they provide contradictory results. The aim of this study is to reveal the sensitivity of dwelling energy performance to the presence of

  18. Surveying dwellings with high indoor radon levels: a BRE guide to radon remedial measures in existing dwellings

    International Nuclear Information System (INIS)

    Scivyer, C.R.

    1993-01-01

    This report is one of a series giving practical advice on methods of reducing radom levels in existing dwellings. It is aimed specifically at builders, surveyors and building specialists surveying for and prescribing remedial measures for dwellings. It supplements guidance available in 'The householders' guide to radon, obtainable from local environmental health officers or from the Department of the Environment. (Author)

  19. The benefits of life cycle inventory parametric models in streamlining data collection. A case study in the wooden pallet sector

    DEFF Research Database (Denmark)

    Niero, Monia; Di Felice, F.; Ren, J.

    2014-01-01

    LCA methodology is time and resource consuming particularly when it comes to data collection and handling, therefore companies, particularly Small and Medium Enterprises (SMEs), are inclined to use streamlined approaches to shorten the resource-consuming life cycle inventory (LCI) phase. An effec......LCA methodology is time and resource consuming particularly when it comes to data collection and handling, therefore companies, particularly Small and Medium Enterprises (SMEs), are inclined to use streamlined approaches to shorten the resource-consuming life cycle inventory (LCI) phase...... study of a SME in the wooden pallet sector, investigating to what extent the use of parametric LCI models can be beneficial both in evaluating the environmental impacts of similar products and in providing a preliminary assessment of the potential environmental impacts of new products. We developed...... an LCI parametric model describing the LCI of a range of wooden pallets and tested its effectiveness with a reference product, namely a non-reversible pallet with four-way blocks. The identified parameters refer to the technical characteristics of the product system, e.g. the number and dimension...

  20. Exposure to Radon in Dwellings in the Area of Zagreb

    International Nuclear Information System (INIS)

    Lokobauer, N.; Franic, Z.; Petroci, Lj.; Sokolovic, E.; Lokner, V.

    1998-01-01

    Until the 1970s radon and its progeny were regarded as radiation health hazards encountered only in the mining and processing of uranium ore. This notion has dramatically changed as a result of increasing efforts made by many countries to measure radon in dwellings. Since it has been assessed that radon constitutes on average about 53% of the human exposure to natural radiation (UNSCEAR 1993), attention to the problem of exposure to radon and associated health risk has been growing in both developed and developing countries. This paper deals with the investigations of indoor radon activity concentrations at selected dwellings in the area of Zagreb. The fact that concentration of indoor radon depends strongly on radium sources in the soil pointed to the possibility that increased radon levels could be measured in the ground floor dwellings. The measurements of indoor radon performed by Honeywell professional radon monitor in the 30 ground floor dwellings, and at same location in 10 dwellings on higher floors. In order to obtain average daily values, radon activity concentrations were measured throughout 24 hours at each dwelling, over the seasons spring-summer and autumn-winter. In the season spring-summer radon activity concentrations in the ground floor dwellings ranged from 22±5 to 133±12 Bqm -3 (mean value 56±31 Bqm -3 ) and in the season autumn-winter ranged from 22±5 to 311±18 Bqm -3 (mean value 94±64 Bqm -3 ). In the dwellings on higher floors radon activity concentrations in the season spring-summer ranged from 11±3 to 78±9 Bqm -3 (mean value 32±21 Bqm -3 ), and in the season autumn-winter ranged from 30±5 to 137±12 Bqm -3 (mean value 60±32 Bqm -3 ). Average annual radon activity concentration for the 30 investigated ground floor dwellings were 75±45 Bqm -3 , and 46±26 Bqm -3 for the 10 dwellings on higher floors. Investigations performed in the dwellings in the area of Zagreb revealed significant differences in radon levels between the ground

  1. Variation of radon exposure in Damascus dwellings

    International Nuclear Information System (INIS)

    Shweikani, R.

    2012-01-01

    In the present work, activity concentrations of 222 Rn in air and 222 Rn and 226 Ra in drinking water were measured in Damascus city covering its old and modern parts. It was found that the average air radon activity concentration in the old part was higher than in the modern part, and in drinking water, radon was found to be 60±3 Bq/l, and less than 0.13 Bq/l for radium, which were lower than the recommended levels set by WHO. - Highlights: ► This work presents screening of natural radioactivity in dwellings in Damascus city. ► Radon, 226 Rn and total alpha/beta in air and drinking water were measured. ► Most of the obtained results were within the recommended levels set by WHO. ► In general radon in the old part was higher than the modern part of the city.

  2. Acoustic quality and sound insulation between dwellings

    DEFF Research Database (Denmark)

    Rindel, Jens Holger

    1998-01-01

    to another, however, several of the results show a slope around 4 % per dB. The results may be used to evaluate the acoustic quality level of a certain set of sound insulation requirements, or they may be used as a basis for specifying the desired acoustic quality of future buildings......During the years there have been several large field investigations in different countries with the aim to find a relationship between sound insulation between dwellings and the subjective degree of annoyance. This paper presents an overview of the results, and the difficulties in comparing...... the different findings are discussed. It is tried to establish dose-response relationships between airborne sound insulation or impact sound pressure level according to ISO 717 and the percentage of people being annoyed by noise from neighbours. The slopes of the dose-response curves vary from one investigation...

  3. Acoustic quality and sound insulation between dwellings

    DEFF Research Database (Denmark)

    Rindel, Jens Holger

    1999-01-01

    to another, however, several of the results show a slope around 4 % per dB. The results may be used to evaluate the acoustic quality level of a certain set of sound insulation requirements, or they may be used as a basis for specifying the desired acoustic quality of future buildings.......During the years there have been several large field investigations in different countries with the aim to find a relationship between sound insulation between dwellings and the subjective degree of annoyance. This paper presents an overview of the results, and the dif-ficulties in comparing...... the different findings are discussed. It is tried to establish dose-response relationships between airborne sound insulation or impact sound pressure level according to ISO 717 and the percentage of people being annoyed by noise from neighbours. The slopes of the dose-response curves vary from one investigation...

  4. Cave dwellings in the Mediterranean basin

    Directory of Open Access Journals (Sweden)

    Viedma Urdiales Eugenia María

    2011-01-01

    Full Text Available The construction and use of subterranean caves for different functions has been relatively commonplace throughout history in different regions around the world, especially in the Mediterranean basin. Some of them are still standing at the beginning of the 21st century, and are a good example of adaptation to the geographic environment, and a part of the historical heritage. Following a short overview of the different Mediterranean countries, this work pays special attention to the present use of caves as dwelling spaces in Italy, and particularly in Spain where the caves are currently in an interesting process of renovation to meet the needs of the present population. This process is helping to boost the local economy, and it is funded by both private and public sources in several towns in Andalusia (Spain.

  5. Balancing out dwelling and moving: optimal sensorimotor synchronization

    Science.gov (United States)

    Girard, Benoît; Guigon, Emmanuel

    2015-01-01

    Sensorimotor synchronization is a fundamental skill involved in the performance of many artistic activities (e.g., music, dance). After a century of research, the manner in which the nervous system produces synchronized movements remains poorly understood. Typical rhythmic movements involve a motion and a motionless phase (dwell). The dwell phase represents a sizable fraction of the rhythm period, and scales with it. The rationale for this organization remains unexplained and is the object of this study. Twelve participants, four drummers (D) and eight nondrummers (ND), performed tapping movements paced at 0.5–2.5 Hz by a metronome. The participants organized their tapping behavior into dwell and movement phases according to two strategies: 1) Eight participants (1 D, 7 ND) maintained an almost constant ratio of movement time (MT) and dwell time (DT) irrespective of the metronome period. 2) Four participants increased the proportion of DT as the period increased. The temporal variabilities of both the dwell and movement phases were consistent with Weber's law, i.e., their variability increased with their durations, and the longest phase always exhibited the smallest variability. We developed an optimal statistical model that formalized the distribution of time into dwell and movement intervals as a function of their temporal variability. The model accurately predicted the participants' dwell and movement durations irrespective of their strategy and musical skill, strongly suggesting that the distribution of DT and MT results from an optimization process, dependent on each participant's skill to predict time during rest and movement. PMID:25878154

  6. Radon concentration in dwellings in Aomori Prefecture, Japan

    International Nuclear Information System (INIS)

    Iyogi, T.; Ueda, S.; Hisamatsu, S.; Kondo, K.; Nakamura, Y.; Tsuji, N.; Mitsubishi Heavy Industries Ltd., Kobe

    2002-01-01

    To obtain an average dose from 222 Rn to the people in Aomori Prefecture where the first Japan's nuclear fuel cycling facilities are now under construction, we surveyed 222 Rn concentrations in 109 dwellings in the Prefecture from 1992 to 1996. The outdoor 222 Rn concentrations were also measured in gardens of 15 dwellings. The 222 Rn concentrations were measured with passive 222 Rn detectors which used a polycarbonate film for counting α-ray and could separate concentrations of 222 Rn from 220 Rn. Counting efficiencies of the detectors were calibrated with a standard 222 Rn chamber in the Environmental Measurement Laboratory in USA and in the National Radiological Protection Board in UK. Geometric means of 222 Rn concentration were 13 and 4.4 Bq x m -3 in the dwellings and outdoor, respectively. These values were consistent to nationwide survey results in Japan. The 222 Rn concentrations in the dwellings depended on their age. The concentrations were higher in recent dwellings than in older ones. The radiation dose from 222 Rn was estimated, taking into account the occupancy factor for inside and outside of dwellings. The annual dose was 0.32 mSv x y -1 , and 99% of the dose came from the exposure to 222 Rn inside the dwelling. (author)

  7. TLS and photogrammetry for the modeling of a historic wooden framework

    Science.gov (United States)

    Koehl, M.; Viale, M.

    2012-04-01

    contents which will be integrated into an informative device. That way, the public can easily visualize the framework, manipulate the 3D model, discover the construction and the various parts of the historical wooden structure. The raw point cloud cannot be used for this kind of applications. It is thus necessary, from the data which it supplies, to create an exploitable model. Several parameters are to be taken into account: the level of detail of the 3D model, the necessary time to model all the beams, the weight of the final files and finally the type of applied texture. The idea was to implement a workflow to reconcile these various criteria, several methods were tested. This project allowed to create a range of solutions (3D models of the complete framework, virtual tour, interactive 3D models, video animations) to allow an uninitiated public to take advantage of 3D material and software often reserved for the professionals. The work was completed by the comparison between a theoretical model of the framework and a more detailed model of the current state, which allowed to make diagnoses and to study the movements of the structure in the time and to supply important data for rehabilitation and renovation operations.

  8. Wind turbine sound pressure level calculations at dwellings.

    Science.gov (United States)

    Keith, Stephen E; Feder, Katya; Voicescu, Sonia A; Soukhovtsev, Victor; Denning, Allison; Tsang, Jason; Broner, Norm; Leroux, Tony; Richarz, Werner; van den Berg, Frits

    2016-03-01

    This paper provides calculations of outdoor sound pressure levels (SPLs) at dwellings for 10 wind turbine models, to support Health Canada's Community Noise and Health Study. Manufacturer supplied and measured wind turbine sound power levels were used to calculate outdoor SPL at 1238 dwellings using ISO [(1996). ISO 9613-2-Acoustics] and a Swedish noise propagation method. Both methods yielded statistically equivalent results. The A- and C-weighted results were highly correlated over the 1238 dwellings (Pearson's linear correlation coefficient r > 0.8). Calculated wind turbine SPLs were compared to ambient SPLs from other sources, estimated using guidance documents from the United States and Alberta, Canada.

  9. Radon in dwellings and lung cancer - a discussion

    International Nuclear Information System (INIS)

    Stranden, E.

    1980-01-01

    A discussion of the lung cancer risk associated with radon exposure inside dwellings is presented. The risk factors found for miners are discussed and modified according to the lower mean breathing rates inside dwellings and the differences in atmosphere. Statistical information on the lung cancer incidence in the Norwegian population indicates that a 'doubling exposure rate' of radon daughters inside dwellings may be about 2-3 WLM/yr. This corresponds to a radon concentration of about 10-15 pCi/l. These values are used in a discussion of the consequences of a future reduction of the mean ventilation rates in modern houses. (author)

  10. 24 CFR 42.375 - One-for-one replacement of lower-income dwelling units.

    Science.gov (United States)

    2010-04-01

    ... related to the conversion. (5) The units must be designed to remain lower-income dwelling units for at... result in the demolition of lower-income dwelling units or the conversion of lower-income dwelling units...-income dwelling units. 42.375 Section 42.375 Housing and Urban Development Office of the Secretary...

  11. Grave pit modifications and wooden structures in the Great Moravian graves and their information potential for cognition of the social structure of the Great Moravian society

    Czech Academy of Sciences Publication Activity Database

    Mazuch, Marian; Hladík, Marek

    2013-01-01

    Roč. 54, č. 2 (2013), s. 45-55 ISSN 1211-7250 R&D Projects: GA ČR GP13-20936P Keywords : Early Middle Ages * Great Moravia * Mikulčice * burial sites * graves * grave pits * burial pits * wooden structures * funeral rite * social structure * GIS * statistics Subject RIV: AC - Archeology, Anthropology, Ethnology

  12. The effect of masking in the attentional dwell time paradigm

    DEFF Research Database (Denmark)

    Petersen, Anders

    2009-01-01

    , 1994). In most studies of attentional dwell time, two masked targets have been used. Moore et al. (1996) have criticised the masking of the first target when measuring the attentional dwell time, finding a shorter attentional dwell time when the first mask was omitted. In the presented work, the effect...... of the first mask is further investigated by including a condition where the first mask is presented without a target. The results from individual subjects show that the findings of Moore et al. can be replicated. The results also suggest that presenting the first mask without a target is enough to produce...... an impairment of the second target. Hence, the attentional dwell time may be a combined effect arising from attending to both the first target and its mask....

  13. Measurements of radon gas in dwellings of Argentina

    International Nuclear Information System (INIS)

    Canoba, A.C.; Arnaud, M.I.; Lopez, F.O.; Oliveira, A.A.

    1998-01-01

    The concentration of radon gas in dwellings of several cities of Argentina was measured. For this purpose, different kind of detectors were used such as passive solid state nuclear track detectors, electrets and detectors which use activated charcoal. Since 1983, a total of 1630 dwellings were analysed. The cases monitored were dwellings where the main construction materials are reinforced concrete and brick. The average values found in each city are below 50 Bq/m 3 . The values above 200-Bqm 3 are very few, and none of them is above 300 Bq/m 3 . The average value of radon gas in air dwellings in our country is 33 Bq/m 3 , with a geometric mean of 23 Bq/m 3 , corresponding to an annual effective dose of 0.83 mSv. (author) [es

  14. Human Body Exergy Balance: Numerical Analysis of an Indoor Thermal Environment of a Passive Wooden Room in Summer

    Directory of Open Access Journals (Sweden)

    Koichi Isawa

    2015-09-01

    Full Text Available To obtain a basic understanding of the resultant changes in the human body exergy balance (input, consumption, storage, and output accompanying outdoor air temperature fluctuations, a “human body system and a built environmental system” coupled with numerical analysis was conducted. The built environmental system assumed a wooden room equipped with passive cooling strategies, such as thermal insulation and solar shading devices. It was found that in the daytime, the cool radiation exergy emitted by surrounding surfaces, such as walls increased the rate of human body exergy consumption, whereas the warm radiant exergy emitted by the surrounding surfaces at night decreased the rate of human body exergy consumption. The results suggested that the rates and proportions of the different components in the exergy balance equation (exergy input, consumption, storage, and output vary according to the outdoor temperature and humidity conditions.

  15. FEAR OF FALLING AMONG COMMUNITY DWELLING OLDER ADULTS

    OpenAIRE

    Michaela Dingová; Eva Králová

    2017-01-01

    Aim: The aim of the study was to describe experience with falls, fear of falling, perceptions of the consequences of falls and how the fear of falling affects daily life in community-dwelling older adults. Design: The study used a qualitative design to describe the lived experiences of community-dwelling older adults with the fear of falling. Methods: Semi-structured interviews were conducted individually with six participants who reported the fear of falling. Results: Five main areas emerged...

  16. Radon and thoron in cave dwellings (Yan'an, China)

    International Nuclear Information System (INIS)

    Wiegand, J.; Feige, S.; Xie Quingling; Schreiber, U.; Wieditz, K.; Wittmann, C.; Luo Xiarong

    2000-01-01

    222 Rn and 220 Rn concentrations were measured in cave dwellings and brick houses in the region of Yan'an (China) during summer 1997. The underground dwellings are built into Quaternary loess, and all investigated houses are founded on it. The median values of indoor 222 Rn and 220 Rn concentrations are 42 (n = 18) and 77Bq m -3 (n = 15) for brick houses and 92 (n = 23) and 215 (n = 17) Bq m -3 for cave dwellings. To classify the dwellings in respect to their cave-character, the fraction of walls having a direct contact to the loess is calculated for each dwelling. While the 222 Rn concentrations are increasing with higher fractions, the 220 Rn concentrations are not correlated with this fraction. On the other hand, due to the short half-life of 220 Rn the distance from the measuring point to the walls is negatively correlated with the 220 Rn concentration, while there is no correlation with the 222 Rn concentration. Therefore, concentric isolines of 220 Rn concentrations showing a strong gradient were detected in cave dwellings. An influence of the ventilation rate is distinct for 222 Rn but weak for 220 Rn. The effective dose rates for 222 Rn and 220 Rn and their progenies are calculated for brick houses (2.7 mSv y -1 ), cave dwellings (7.1 mSv y -1 ), and for traditional cave dwellings with a bed foundation built with loess (16.7 mSv y -1 ). These calculations are based on summer measurements only. It is expected that the true effective dose rates will be significantly higher

  17. Assessing the Long-Term Efficacy of Geotextiles in Preserving Archaeological Wooden Shipwrecks in the Marine Environment

    Science.gov (United States)

    Pournou, Anastasia

    2017-09-01

    Archaeological wood cannot be found preserved in the marine ecosystem unless it is buried in anoxic or dysoxic sediments. These habitats do not allow the growth and activity of wood degraders, and thus wooden shipwrecks can survive within these environments for centuries. However, due to natural factors or anthropogenic interventions wood can be re-exposed to the oxygenated water column, where it disintegrates rapidly. In such cases, in situ preservation becomes a main priority, as lifting and conservation are not usually feasible. One of the most common in situ preservation methods is the covering of wood with geotextiles. To date however, even though this method has been used worldwide the past decades, its long-term performance and effectiveness hasn't been evaluated. This work presents, for the first time, results on the efficacy of geotextiles used for 12 years on a shipwreck found in the Mediterranean. Fabric performance was evaluated based on wreck timbers condition, its physical, mechanical and hydraulic properties and the ecological and hydrographical profile of the underwater site created, following its application. Obtained results demonstrated that wreck timbers covered with geotextiles did not show signs of attack during the 12 years of in situ preservation. Geotextiles properties were found to be adequately retained when compared with properties of new unused geotextiles. The fabric had entrapped sediment and was colonised by the local flora and fauna, re-establishing anoxic conditions. This work showed that geotextiles can successfully preserve in situ wooden shipwrecks in high biodeterioration risk environments for at least a 10 year period.

  18. Assessing the Long-Term Efficacy of Geotextiles in Preserving Archaeological Wooden Shipwrecks in the Marine Environment

    Science.gov (United States)

    Pournou, Anastasia

    2018-04-01

    Archaeological wood cannot be found preserved in the marine ecosystem unless it is buried in anoxic or dysoxic sediments. These habitats do not allow the growth and activity of wood degraders, and thus wooden shipwrecks can survive within these environments for centuries. However, due to natural factors or anthropogenic interventions wood can be re-exposed to the oxygenated water column, where it disintegrates rapidly. In such cases, in situ preservation becomes a main priority, as lifting and conservation are not usually feasible. One of the most common in situ preservation methods is the covering of wood with geotextiles. To date however, even though this method has been used worldwide the past decades, its long-term performance and effectiveness hasn't been evaluated. This work presents, for the first time, results on the efficacy of geotextiles used for 12 years on a shipwreck found in the Mediterranean. Fabric performance was evaluated based on wreck timbers condition, its physical, mechanical and hydraulic properties and the ecological and hydrographical profile of the underwater site created, following its application. Obtained results demonstrated that wreck timbers covered with geotextiles did not show signs of attack during the 12 years of in situ preservation. Geotextiles properties were found to be adequately retained when compared with properties of new unused geotextiles. The fabric had entrapped sediment and was colonised by the local flora and fauna, re-establishing anoxic conditions. This work showed that geotextiles can successfully preserve in situ wooden shipwrecks in high biodeterioration risk environments for at least a 10 year period.

  19. Dwellings with cellars and basements. A BRE guide to radon remedial measures in existing dwellings

    International Nuclear Information System (INIS)

    Scivyer, C.R.; Jaggs, M.P.R.

    1998-01-01

    This guide is one of a series giving practical advice on methods of reducing radon levels in existing dwellings. It is intended to help surveyors, builders and householders who are trying to reduce indoor radon levels in houses with cellars or basements. The guide is based on a large body of remedial work carried out to advice given by BRE, and on discussions with others working in the field. The measures it describes are applicable, in principle, to all dwellings and other buildings of a similar scale and construction which have cellars or basements. Contact details of other organisations referred to are listed at the back of this guide. Basements and cellars are relatively uncommon in the United Kingdom, but where they do occur they are likely to be major contributors to the radon problem within a building. Experience shows that most houses with high indoor radon levels can be remedied through the use of straightforward building works. These can be carried out by a builder or householder competent in DIY. The cost should not be excessive. Before reading this guide, for background information on radon, consult Radon: a householder's guide and Radon: a guide to reducing levels M your home, obtainable from local Environmental Health Officers or from the Department of the Environment, Transport and the Regions. The Government recommends that, if the average radon concentration in a dwelling exceeds 200 Bq/m 3 (the 'action' level), measures should be taken to reduce it. This guide assumes that radon measurements have been made in the building and that the annual average indoor radon level was shown to exceed the action level

  20. UK standards for exposure to radon daughters in dwellings

    International Nuclear Information System (INIS)

    Webb, G.A.M.; O'Riordan, M.C.

    1988-01-01

    The National Radiological Protection Board has issued formal advice on the standards to be adopted in the UK for control of exposures to radon daughters in existing dwellings and for changes in building procedures for future dwellings. The standards are based on those recommended by the International Commission on Radiological Protection but adapted to circumstances in the United Kingdom. The matters taken into account by the Board when formulating its advice include the conversion from measured concentrations of radon to effective dose equivalent and the implied levels of risk, the comparison of these levels with risks from other causes, the numbers of dwellings in which various annual doses are likely to be exceeded, the geographical distribution of these dwellings, the likely costs and effectiveness of various remedial measures and the degree of domestic disruption. The action level for existing dwellings selected by the Board was the same, 20 mSv per annum, as that recommended by the ICRP, but the upper bound for new dwellings of 5 mSv per annum was lower than that suggested by the ICRP

  1. UK standards for exposure to radon daughters in dwellings

    International Nuclear Information System (INIS)

    Webb, G.A.M.; O'Riordan, M.C.

    1988-01-01

    The National Radiological Protection Board has issued formal advice on the standards to be adopted in the UK for control of exposures to radon daughters in existing dwellings and for changes in building procedures for future dwellings. The standards are based on those recommended by the international commission on radiological protection but adapted to circumstances in the United Kingdom. The matters taken into account by the Board when formulating its advice, and which are discussed in the paper, include the conversion from measured concentrations of radon to effective dose equivalent and the implied levels of risk, the comparison of these levels with risks from other causes, the numbers of dwellings in which various annual doses are likely to be exceeded, the geographical distribution of these dwellings, the likely costs and effectiveness of various remedial measures and the degree of domestic disruption. The action level for existing dwellings selected by the Board was the same, 20 mSv per annum, as that recommended by the ICRP, but the upper bound for new dwellings of 5 mSv per annum was lower than that suggested by the ICRP [fr

  2. Modeling ventilation and radon in new dutch dwellings

    International Nuclear Information System (INIS)

    Janssen, M.P.M.

    2003-01-01

    Indoor radon concentrations were estimated for various ventilation conditions, the differences being mainly related to the airtightness of the dwelling and the ventilation behavior of its occupants. The estimations were aimed at describing the variation in air change rates and radon concentrations to be expected in the representative newly built Dutch dwellings and identifying the most important parameters determining air change rate and indoor radon concentration. The model estimations were compared with measurements. Most of the air was predicted to enter the model dwelling through leaks in the building shell, independent of the ventilation conditions of the dwelling. Opening the air inlets was shown to be an efficient way to increase infiltration and thus to decrease radon concentration. The effect of increasing the mechanical ventilation rate was considerably less than opening the air inlets. The mechanical ventilation sets the lower limit to the air change rate of the dwelling, and is effective in reducing the radon concentration when natural infiltration is low. Opening inside doors proved to be effective in preventing peak concentrations in poorly ventilated rooms. As the airtightness of newly built dwellings is still being improved, higher radon concentrations are to be expected in the near future and the effect of occupant behavior on indoor radon concentrations is likely to increase. According to the model estimations soil-borne radon played a moderate role, which is in line with measurements. (au)

  3. Cost effectiveness of reducing radon exposure in Spanish dwellings

    International Nuclear Information System (INIS)

    Colgan, P.A.; Gutierrez, J.

    1996-01-01

    Published information on the distribution of radon levels in Spanish single family dwellings is used to evaluate the cost-effectiveness of three different intervention scenarios: remediation of existing dwellings, radon proofing of all future dwellings and the targetting of areas with higher than average indoor radon concentrations. Analysis is carried out on the basis of a Reference Level of 400 Bq m -3 for the existing housing stock and 200 Bq m -3 for new dwellings. Certain assumptions are made about the effectiveness and durability of the measures applied and annualised costs are used to calculate the costs per lung cancer death averted. The results reveal that targetting future housing is a more cost-effective option than remediation of existing dwellings with radon concentrations above the Reference Level -the costs per lung cancer death averted are typically $145000. In high-risk areas, these costs can be considerably less, depending on the percentage of dwellings expected to exceed the Reference Level and the average savings in exposure as a result of the intervention. The costs of intervention to reduce lung cancer deaths following exposure to radon compare favourably with those of other health programmes in other countries. (Author)

  4. Contamination of dwellings by particulate matter: ingress and distribution within the dwelling

    International Nuclear Information System (INIS)

    Cannell, R.J.; Goddard, A.J.H.; ApSimon, H.M.

    1987-01-01

    A newly developed system for rapid, non-invasive measurements of deposited fluorescent tracer materials over extended surface areas has been used to gather information on the rate at which these materials would be introduced into a dwelling from the exterior by the occupants' footwear. Some additional information on the rate at which redistribution would occur and the potential for decontamination by normal household equipment has also been obtained. The limitations of using tracers to acquire such data are recognised but few experimental alternatives exist. Further work is planned to extend the range of particle sizes used in the continuing laboratory studies before a more realistic simulation is undertaken in test houses. (author)

  5. Radiation in dwellings and cancer in children

    International Nuclear Information System (INIS)

    Stjernfeldt, M.; Samuelsson, L.; Ludvigsson, J.

    1987-01-01

    Indoor radiation, especially radon exposure, has been in focus in the public domain during the past several years. The growing concern among parents of children with cancer possibly having high radiation levels in their homes led us to study the levels of gamma- and alpha-radiation levels in the homes of a group of children in the county of Ostergoetland. The indoor concentration of alpha-emitting radon daughters was measured by a high-voltage method. The gamma activity was measured with a standard detector scintillation meter. The yearly average for radon-daughter concentration in both cases (57 Bq/m3) and controls (61 Bq/m3) corresponds fairly well with the national average of 53 Bq/m3. The yearly average for gamma radiation (cases 0.37 mGy, controls 0.36 mGy) is much lower than the permissible upper level in dwellings (2.5 mGy/year). The values seem to be of the same order as the subtracted cosmic radiation, which is 0.24-0.26 mGy. No appreciable difference could thus be found between cases and controls either from gamma radiation or radon-daughter exposure. We cannot from our study rule out the possibility of an effect of low-level radiation in susceptible individuals, but it seems clear that children who get cancer do not live in more radioactive homes than other children

  6. Environmental radon monitoring in Khartoum dwellings

    International Nuclear Information System (INIS)

    Mohamed, I. S.

    1992-03-01

    Radon is a naturally occurring radioactive gas that is released into the surrounding environment. Existence of this gas indoors ( house and dwelling ) mainly depends on its source in the building materials, the soil beneath the buildings and the ventilation of the rooms. In this study the technique of ground activated charcoal and gamma spectrometry system are used for Radon measurement. This technique has been calibrated and optimized. The main reason for radon determination in house comes from the fact that Radon and its daughters are directly responsible of lung cancer and some kidney diseases. The measurements, in this study, have been performed for Khartoum indoors. 644 rooms have been measured. These rooms were sorted out into groups according to their building material as well as the ventilation of each room. The measurements covered the whole year ( the three main seasons ) to see the variation of Radon level, since its emanation is affected by the temperature. Also monthly outdoor measurements have been performed in different locations in Khartoum. On the basis of the results obtained, the radiation dose received by the public due to the inhalation of this gas has been calculated. The average annual effective dose was found to be 1.2 m Sv. (author). 33 refs., 17 tabs., 24 figs

  7. Indoor radon levels in Riyadh city dwellings

    International Nuclear Information System (INIS)

    Alghamdi, Abdulrahman S.; Khalid, Aleissa; Ghazi, Alzeer

    2008-01-01

    Full text: Building materials used for construction of houses represent a major source of indoor radon. In this investigation, indoor radon concentrations are found to vary substantially among the different building materials, ventilation, cooling and heating systems used. This paper presents the effects of these factors on the radon concentration in Riyadh city dwellings. The measurements were obtained by using a passive integrating ionization system with an E-Perm Electret ion chamber. The study covered more than 700 houses and apartments, which were selected to cover the most common type of houses. The concentration range was found to be 1.02 to 196 Bq.m -3 , with an average value of 17.5 ± 3 Bq.m -3 . The results show that the radon concentration is higher in houses where the white bricks, no ventilation systems, plastic paint and Freon air conditioners are used, but relatively lower in houses where the red bricks, window ventilation, and water air conditioner is used. (author)

  8. Radon in Estonian dwellings - Results from a National Radon Survey

    Energy Technology Data Exchange (ETDEWEB)

    Pahapill, Lia; Rulkov, Anne; Rajamaee, Raivo [Estonian Radiation Protection Centre (Kiirguskeskus), Tallinn (Spain); Aakerblom, Gustav [Swedish Radiation Protection Authority, Stockholm (Sweden)

    2003-10-01

    A countrywide survey of radon concentrations in Estonian dwellings was carried out during the period 1998-2001. The survey formed a part of the cooperation program on radiation protection between the Estonian Radiation Protection (Kiirguskeskus) Centre and the Swedish Radiation Protection Authority (SSI). The survey included measurements in a number of dwellings representative for Estonia in detached houses and multifamily buildings (only dwellings on the bottom floor were included in the survey). Altogether, radon concentrations were measured in 515 dwellings, a number large enough to be statistically significant. All measurements were made with alphatrack film detectors of the same type that SSI uses in Sweden. The measurements were made during a 2-3 month period during the winter half-year. Two detectors were used in each dwelling. In Estonia there are 0.17 million dwellings in detached houses and 0.45 million in multi apartment buildings. Of the 1.26 million inhabitants in Estonia. 0.36 million live in detached houses and 0.90 million in multi apartment buildings. Most of the latter were built during the Soviet occupation. Of the dwellings in multifamily buildings 30 % are assumed to be situated on the first floor. The mean radon concentration in dwellings in detached hoses, according to the survey results, is 103 Bq/m{sup 3}, in dwellings on the bottom floor in multi apartment buildings it is 78 Bq/m{sup 3}. In 1% of the dwellings the radon concentration exceeded 400 Bq/m{sup 3}. The highest radon concentration found in the study was 1040 Bq/m{sup 3}. Based on the assumption that the average radon concentration in the dwellings in multi-apartment buildings that are not situated on the bottom floor is 30 Bq/m{sup 3}, and that these dwellings constitute 70% of all dwellings in multi apartment buildings, the mean radon concentration in dwellings in multi apartment buildings is calculated to be 44 Bq/m{sup 3}. The mean value for all Estonia dwellings is calculated

  9. Radon in Estonian dwellings - Results from a National Radon Survey

    International Nuclear Information System (INIS)

    Pahapill, Lia; Rulkov, Anne; Rajamaee, Raivo; Aakerblom, Gustav

    2003-10-01

    A countrywide survey of radon concentrations in Estonian dwellings was carried out during the period 1998-2001. The survey formed a part of the cooperation program on radiation protection between the Estonian Radiation Protection (Kiirguskeskus) Centre and the Swedish Radiation Protection Authority (SSI). The survey included measurements in a number of dwellings representative for Estonia in detached houses and multifamily buildings (only dwellings on the bottom floor were included in the survey). Altogether, radon concentrations were measured in 515 dwellings, a number large enough to be statistically significant. All measurements were made with alphatrack film detectors of the same type that SSI uses in Sweden. The measurements were made during a 2-3 month period during the winter half-year. Two detectors were used in each dwelling. In Estonia there are 0.17 million dwellings in detached houses and 0.45 million in multi apartment buildings. Of the 1.26 million inhabitants in Estonia. 0.36 million live in detached houses and 0.90 million in multi apartment buildings. Most of the latter were built during the Soviet occupation. Of the dwellings in multifamily buildings 30 % are assumed to be situated on the first floor. The mean radon concentration in dwellings in detached hoses, according to the survey results, is 103 Bq/m 3 , in dwellings on the bottom floor in multi apartment buildings it is 78 Bq/m 3 . In 1% of the dwellings the radon concentration exceeded 400 Bq/m 3 . The highest radon concentration found in the study was 1040 Bq/m 3 . Based on the assumption that the average radon concentration in the dwellings in multi-apartment buildings that are not situated on the bottom floor is 30 Bq/m 3 , and that these dwellings constitute 70% of all dwellings in multi apartment buildings, the mean radon concentration in dwellings in multi apartment buildings is calculated to be 44 Bq/m 3 . The mean value for all Estonia dwellings is calculated to be 60 Bq/m 3 . Using

  10. 25 CFR 256.21 - Will I have to vacate my dwelling while repair work or replacement of my dwelling is being done?

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Will I have to vacate my dwelling while repair work or replacement of my dwelling is being done? 256.21 Section 256.21 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR HOUSING HOUSING IMPROVEMENT PROGRAM § 256.21 Will I have to vacate my dwelling while...

  11. Environmental monitoring of a Sardinian earthen dwelling during the summer season

    Science.gov (United States)

    Desogus, G.; Di Benedetto, S.; Grassi, W.; Testi, D.

    2014-11-01

    Increasing interest in earth architecture has led to the development of new international norms regarding these structures. Although Italy has no specific legislation for this building type, both national laws for the safeguard of rural architecture and regional norms regarding the conservation of historical centers have considerably slowed down the pace of their destruction. This is particularly true for Sardinia, which maintains a conspicuous heritage of "raw earth" architecture, mostly in the old town centers of the Campidano plain and in its adjacent valley. Due to the current legislation on energy efficiency in buildings, it has become essential - particularly for the Sardinian region - to define guidelines for the improvement of energy efficiency for this existing building heritage and identify the best parameters for their energetic classification. Currently, these constructions are heavily penalized by the gap that persists between the requirements of current energy balance evaluations, calculated upon heating and domestic hot water energy demands, and the actual year-round energy performance, which also includes the summer season. Moreover, this building type has a low lifecycle environmental impact, but this aspect is not properly "rewarded" by Italian regulations. The study proposed herein firstly took into account the simulation of the thermal transient characteristics of the adobe wall (brick made of clay, earth and straw, forged with wooden molds and sun dried). Analytical calculations were performed using a transient model, assuming sinusoidal behavior of all the parameters acting on the system. The results showed a high thermal inertia of the material and a good ability in dampening the external thermal wave. Next, we conducted an internal and external environmental monitoring of an existing earthen residential building in Sardinia ("Casa Mancosu", Serramanna, VS), which provided the experimental data for the evaluation of the whole building thermo

  12. Environmental monitoring of a Sardinian earthen dwelling during the summer season

    International Nuclear Information System (INIS)

    Desogus, G; Di Benedetto, S; Grassi, W; Testi, D

    2014-01-01

    Increasing interest in earth architecture has led to the development of new international norms regarding these structures. Although Italy has no specific legislation for this building type, both national laws for the safeguard of rural architecture and regional norms regarding the conservation of historical centers have considerably slowed down the pace of their destruction. This is particularly true for Sardinia, which maintains a conspicuous heritage of ''raw earth'' architecture, mostly in the old town centers of the Campidano plain and in its adjacent valley. Due to the current legislation on energy efficiency in buildings, it has become essential – particularly for the Sardinian region – to define guidelines for the improvement of energy efficiency for this existing building heritage and identify the best parameters for their energetic classification. Currently, these constructions are heavily penalized by the gap that persists between the requirements of current energy balance evaluations, calculated upon heating and domestic hot water energy demands, and the actual year-round energy performance, which also includes the summer season. Moreover, this building type has a low lifecycle environmental impact, but this aspect is not properly ''rewarded'' by Italian regulations. The study proposed herein firstly took into account the simulation of the thermal transient characteristics of the adobe wall (brick made of clay, earth and straw, forged with wooden molds and sun dried). Analytical calculations were performed using a transient model, assuming sinusoidal behavior of all the parameters acting on the system. The results showed a high thermal inertia of the material and a good ability in dampening the external thermal wave. Next, we conducted an internal and external environmental monitoring of an existing earthen residential building in Sardinia (''Casa Mancosu'', Serramanna, VS), which provided

  13. Survey of off-grid dwellings : January and February 2003

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    This report presents statistics from the results of a survey on off-grid dwellings in the Yukon. Two hundred and fifty-eight surveys were completed, and all questions asked in the survey were represented in this document. Dwellings were defined as any buildings in which people slept or ate, including cabins, cottages, lodges and camps, year-round or otherwise. Information was provided on whether or not the dwellings were main residences or recreational properties and the lengths of time in which the dwellings were used. Comments were presented on the difficulties of getting mortgages or other financing for off-grid dwellings. Detailed and specific questions were asked, requiring information about distances from electric poles and intentions to connect to the grid; whether or not the property was a subsistence and/or commercial residence; energy sources currently used; heating systems; light sources; water pumping; power generators; telephones; wind and solar power generators; and, costs involved in purchase and maintenance of energy systems. A series of questions revolved around the use, cost and maintenance of generators. Maintenance and installation costs of photovoltaic systems and wind power generators were presented. Micro-hydro system generators were discussed. Future involvement in energy programs was suggested with specific reference to off-grid energy programs. The survey concluded with comments and questions about off-grid energy in general. tabs.

  14. Indoor environmental quality in French dwellings and building characteristics

    Science.gov (United States)

    Langer, Sarka; Ramalho, Olivier; Derbez, Mickaël; Ribéron, Jacques; Kirchner, Severine; Mandin, Corinne

    2016-03-01

    A national survey on indoor environmental quality covering 567 residences in mainland France was performed during 2003-2005. The measured parameters were temperature, relative humidity, CO2, and the indoor air pollutants: fourteen individual volatile organic compounds (VOC), four aldehydes and particulate matter PM10 and PM2.5. The measured indoor concentrations were analyzed for correlations with the building characteristics: type of dwelling, period of construction, dwelling location, type of ventilation system, building material, attached garage and retrofitting. The median night time air exchange rate (AER) for all dwellings was 0.44 h-1. The night time AER was higher in apartments (median = 0.49 h-1) than in single-family houses (median = 0.41 h-1). Concentration of formaldehyde was approximately 30% higher in dwellings built after 1990 compared with older ones; it was higher in dwellings with mechanical ventilation and in concrete buildings. The VOC concentrations depended on the building characteristics to various extents. The sampling season influenced the majority of the indoor climate parameters and the concentrations of the air pollutants to a higher degree than the building characteristics. Multivariate linear regression models revealed that the indoor-outdoor difference in specific humidity, a proxy for number of occupants and their indoor activities, remained a significant predictor for most gaseous and particulate air pollutants. The other strong predictors were outdoor concentration, smoking, attached garage and AER (in descending order).

  15. Dwell time adjustment for focused ion beam machining

    International Nuclear Information System (INIS)

    Taniguchi, Jun; Satake, Shin-ichi; Oosumi, Takaki; Fukushige, Akihisa; Kogo, Yasuo

    2013-01-01

    Focused ion beam (FIB) machining is potentially useful for micro/nano fabrication of hard brittle materials, because the removal method involves physical sputtering. Usually, micro/nano scale patterning of hard brittle materials is very difficult to achieve by mechanical polishing or dry etching. Furthermore, in most reported examples, FIB machining has been applied to silicon substrates in a limited range of shapes. Therefore, a versatile method for FIB machining is required. We previously established the dwell time adjustment for mechanical polishing. The dwell time adjustment is calculated by using a convolution model derived from Preston’s hypothesis. More specifically, the target removal shape is a convolution of the unit removal shape, and the dwell time is calculated by means of one of four algorithms. We investigate these algorithms for dwell time adjustment in FIB machining, and we found that a combination a fast Fourier transform calculation technique and a constraint-type calculation is suitable. By applying this algorithm, we succeeded in machining a spherical lens shape with a diameter of 2.93 μm and a depth of 203 nm in a glassy carbon substrate by means of FIB with dwell time adjustment

  16. Diagnostics of and measures against radon concentrations in a dwelling

    International Nuclear Information System (INIS)

    Berger, H.

    1994-02-01

    Results are presented of measurements in a test-dwelling in the period april 1993 - november 1993. The purpose of the measurements was to investigate the possibilities of using a blower door (a fan in a wall of the dwelling) for specifying sources of radon in the dwelling, employing the diagnostic method developed at the KVI (Nuclear Physics Accelerator Institute in Groningen, Netherlands). Special attention is paid to the measurement of two input variables for the diagnostic method: transparency of the walls of the dwelling and the strength of static sources. Also measures aimed at reducing radon concentrations in the dwelling are discussed. The main conclusions are that (a) the pressure-variation method is a valid procedure to measure the transparency of walls and floors; (b) the blower door is a suitable technique for arriving at a correct diagnosis; and (c) over-pressurizing the crawl-space is the most effective measure in reducing the radon concentration of the crawl-space. More research on air flows in the soil is recommended. 21 figs., 28 tabs., 7 refs

  17. A study of radon variation in dwelling during 1988

    International Nuclear Information System (INIS)

    Shaikh, A.N.; Ramachandran, T.V.; Muraleedharan, T.S.; Subbaramu, M.C.

    1989-01-01

    Natural radioactivity due to radon and its progeny levels indoors contributes significantly to the total radiation to man. The main source of radon and its progeny in a dwelling is the emanation of radon gas from soil. The temperature and ventilation vary in a dwelling during the year. These parameters influence the indoor radon levels. The seasonal variation of radon was studied in a dwelling as well as in the outside air. The filter paper method and alpha counting, and the solid state track detector technique and track counting were used to study the radon levels. The geometric mean of radon daughters concentrations were 0.5 mWL and 0.8 mWL measured by filter-paper method and SSNTD method respectively. The geometric mean of radon concentrations were 6.2 Bqm -3 and 10.0 Bqm -3 by filter-paper method and SSNTD method respectively. (author). 3 figs., 3 tabs., 13 refs

  18. Air supersaturation, release of wooden fibres and upstream migration of Atlantic salmon at Rygene power plant in the River Nidelva, Aust Agder county; Vurdering av luftovermetning, trefiberutslipp og oppvandring av laks ved Rygene kraftverk i Nidelva, Aust-Agder

    Energy Technology Data Exchange (ETDEWEB)

    Thorstad, Eva B.; Kroglund, Frode; Oekland, Finn; Heggberget, Tor G.

    1997-12-31

    Incidents of dead fish have been reported in connection with a power plant at Rygene on the River Nidelva in the Aust-Agder county, Norway. Air supersaturation has been used in a bypass construction of the power plant tunnel system. In addition, wooden fibres from a fabric have been released into the water of the tunnel. Results from relevant studies concerning air saturation, wooden fibres and upstream migration are summarised in this report. 148 refs., 4 figs., 2 tabs.

  19. Felicjan Sławoj-Składkowski (1885-1962): The only known doctor-soldier-politician with an outdoor-wooden-toilet named after him.

    Science.gov (United States)

    Ohry, Avi

    2017-05-01

    Felicjan Sławoj-Składkowski was a Polish physician, General and politician who served as Polish Minister of Internal Affairs and was the last Prime Minister of Poland before the Second World War. The lack of basic sanitation in many of Poland's villages caused him to issue a decree that every household in Poland must have a latrine in working order. Wooden sheds were built in the backyards, subsequently named 'sławojkis'.

  20. The survey of dwellings with increased radon levels in Slovakia

    International Nuclear Information System (INIS)

    Vicanova, M.

    1998-01-01

    This national survey of indoor radon measurements in a sample of dwellings in Slovakia was organised by the Institute of Preventive and Clinical Medicine in Bratislava. The aim was to find districts and type of dwellings with the highest indoor radon concentrations and to estimate the radiation load of the Slovak population owing the indoor radon exposure. Passive solid state nuclear track detectors were used to measure indoor radon concentrations. The detectors were polyallyldiglycolcarbonate CR-39 which were placed in about 6,000 selected houses (minimum two detectors for every residence). After six months exposed detectors and questionnaires were returned to for analysis. Electrochemical etching combined with a chemical pre-etching process was used for evaluating detectors. Present results are from 3,657 residents (0.2% of total dwellings in Slovakia). It was found that the arithmetic mean of equilibrium equivalent concentration (EEC) was 86 ± 119 Bq m -3 , the geometric mean was about 41 ± 2.22 Bq m -3 and 11% of dwellings (N = 409) have a greater EEC of radon than the action level (200 Bq m -3 ). The national survey results suggest that Slovakia may be among the countries with high radon risk in Central Europe. The population-weighted arithmetic mean is 48 Bq m -3 , the maximum value found was 1500 Bq m -3 and the average annual effective dose from indoor radon exposure is 2.1 mSv. The district with the highest indoor radon concentrations correlate with known presence of uranium in the soil, therefore the soil is probably the main source of radon in Slovak dwellings. This survey of dwellings with increased radon levels supported this conclusion, because the highest radon levels were found in older family houses without cellars. (author)

  1. Health hazards from radon daughters in dwellings in Sweden

    International Nuclear Information System (INIS)

    Axelson, O.; Edling, C.

    1980-01-01

    To clarify the possible etiological role for lung cancer from exposure to the low levels of radon and its daughters in dwellings, a case-control study was made, comparing cases of lung cancer with controls with respect to residency in different types of houses. This pilot study was restricted to include only people who lived in typically rural areas. The results support the hypothesis that radon and radon daughter exposure in dwellings is pertinent to the question of the etiology of lung cancer

  2. Spin-dependent dwell time through ferromagnetic graphene barrier

    International Nuclear Information System (INIS)

    Sattari, F.

    2014-01-01

    We investigated the dwell time of electrons tunneling through a ferromagnetic (FM) graphene barrier. The results show that the spin polarization can be efficiently controlled by the barrier width, barrier height, and the incident electron energy. Furthermore, it is found that electrons with different spin orientations will spend different times through the barrier. The difference of the dwell time between spin-up and spin-down electrons arises from the exchange splitting, which is induced by the FM strip. Study results indicate that a ferromagnetic graphene barrier can cause a nature spin filter mechanism in the time domain

  3. Simplified hourly method to calculate summer temperatures in dwellings

    DEFF Research Database (Denmark)

    Mortensen, Lone Hedegaard; Aggerholm, Søren

    2012-01-01

    with an ordinary distribution of windows and a “worst” case where the window area facing south and west was increased by more than 60%. The simplified method used Danish weather data and only needs information on transmission losses, thermal mass, surface contact, internal load, ventilation scheme and solar load...... program for thermal simulations of buildings. The results are based on one year simulations of two cases. The cases were based on a low energy dwelling of 196 m². The transmission loss for the building envelope was 3.3 W/m², not including windows and doors. The dwelling was tested in two cases, a case...

  4. Sound classification of dwellings - Comparison of schemes in Europe

    DEFF Research Database (Denmark)

    Rasmussen, Birgit

    2009-01-01

    National sound classification schemes for dwellings exist in nine countries in Europe, and proposals are under preparation in more countries. The schemes specify class criteria concerning several acoustic aspects, the main criteria being about airborne and impact sound insulation between dwellings......, facade sound insulation and installation noise. The quality classes reflect dierent levels of acoustical comfort. The paper presents and compares the sound classification schemes in Europe. The schemes have been implemented and revised gradually since the 1990es. However, due to lack of coordination...

  5. Exposure to radon in Sweden dwellings - attitudes and elimination

    International Nuclear Information System (INIS)

    Jansson, B.; Tholander, M.; Axelson, O.

    1989-01-01

    Owners of 208 dwellings with radon daughter concentrations of 400 Bq/m 3 EER or above were asked about attitudes and measures toward elimination via mailed questionnaires. The response rate was 88% and some steps toward elimination had been taken in 83 dwellings. For the remaining houses, no improvements had been made either because of financial problems, lack of technical advice, or doubts about radon daughter exposure as a health hazard. The results of this study suggest the need to more definitely assess the risk through epidemiologic studies, as well as to provide more information about technical solutions and financial support to house owners

  6. Measurements of radon in dwellings with CR-39 track detectors

    DEFF Research Database (Denmark)

    Majborn, Benny

    1986-01-01

    A passive integrating dosemeter has been designed for measuring natural radiation in dwellings. The dosemeter contains one or two CR-39 track detectors to measure radon and three thermoluminescence dosemeters to measure external radiation. The dosemeter was investigated in a pilot study in 1983....../84, and it is now used in a nationwide survey of natural radiation in Danish dwellings. The characteristics of the dosemeter with respect to radon measurements are presented, and the radon monitoring results obtained in the pilot study are summarized...

  7. Comparison of Different Assembling Techniques Regarding Cost, Durability, and Ecology - A Survey of Multi-layer Wooden Panel Assembly Load-Bearing Construction Elements

    Directory of Open Access Journals (Sweden)

    Dietrich Buck

    2015-10-01

    Full Text Available Wood is a pure, sustainable, renewable material. The increasing use of wood for construction can improve its sustainability. There are various techniques to assemble multi-layer wooden panels into prefabricated, load-bearing construction elements. However, comparative market and economy studies are still scarce. In this study, the following assembling techniques were compared: laminating, nailing, stapling, screwing, stress laminating, doweling, dovetailing, and wood welding. The production costs, durability, and ecological considerations were presented. This study was based on reviews of published works and information gathered from 27 leading wood product manufacturing companies in six European countries. The study shows that the various techniques of assembling multi-layer wooden construction panel elements are very different. Cross laminated timber (CLT exhibited the best results in terms of cost and durability. With regard to ecological concerns, dovetailing is the best. Taking into account both durability and ecological considerations, wooden screw-doweling is the best. These alternatives give manufacturers some freedom of choice regarding the visibility of surfaces and the efficient use of lower-quality timber. CLT is the most cost-effective, is not patented, and is a well-established option on the market today.

  8. Characteristics and Influence to Fruit Distillates Quality of Rapid Induction of Ageing Character in the Presence of Mulberry Tree (Morus alba L. Wooden Chips

    Directory of Open Access Journals (Sweden)

    Elena MUDURA

    2016-11-01

    Full Text Available Research on rapid induction of ageing character to double distilled traditional fruit brandies, from Transylvania region was conducted. Mulberry tree chips were used as an alternative to traditional ageing in wooden barrels. The aim of this study was to highlight the factors influencing the chemical composition of fruit brandies, both depending on the type of the wood used and the transformations occurred during the heat treatment. Fruit distillates were produced after the traditional method – double distillation in copper alambic. The evaluation of the brandies consisted in analyzing the chemical parameters and the phenolic compounds after two months of ageing with wood chips. Results were compared with a control sample (unaged distillate, and found that during the ageing process volatile and non-volatile compounds were extracted significantly. The heat treatment influenced the chemical composition of the wooden chips. The chemical composition of finished products varied due to the composition of the wooden chips used and to the heat treatment applied. Evaluation of volatile and non-volatile compounds formed was carried out by comparison with the samples of the unaged distillate. It was demonstrated the improvement of chemical characteristics and polyphenolic compounds content, by rapidly inducing of the ageing character.

  9. Analysis of early mortality rates of survivors exposed within Japanese wooden houses in Hiroshima by exposed distance

    International Nuclear Information System (INIS)

    Hayakawa, Norihiko; Munaka, Masaki; Kurihara, Minoru; Ohkita, Takeshi.

    1986-01-01

    Mortality for 3,215 A-bomb survivors who were exposed in Japanese wooden houses at ≤ 1,300 m from the hypocenter on August 6, 1945 was examined. An overall mortality was 51 % (1,640/3,215 survivors) within 61 days after the exposure. According to the distance from the hypocenter, it was 100 % in A-bomb survivors exposed at ≤ 600 m, and 20 % in those exposed between 1,201 m and 1,300 m. The mortality decreased with increasing the distance from the hypocenter. In conjunction with the duration after the exposure and the distance from the hypocenter, the mortality was 100 % 12 days after the exposure in survivors exposed at ≤ 600 m. In survivors exposed at > 800 m, the mortality tended to be higher two weeks after the exposure than immediately after that. The distance from the hypocenter causing 50 per cent mortality was estimated to be 1,026 m from August 6 to October 5; 1,002 m from August 6 to September 10; 887 m from August 7 to September 10; and 867 m from August 20 to September 16. However, these figures were probably lower than the real mortality rates, since no information was available when whole family died. (Namekawa, K.)

  10. Evaluation of ash deposits during experimental investigation of co-firing of Bosnian coal with wooden biomass

    Energy Technology Data Exchange (ETDEWEB)

    Smajevic, Izet; Kazagic, Anes [JP Elektroprivreda BiH d.d., Sarajevo (Bosnia and Herzegovina); Sarajevo Univ. (Bosnia and Herzegovina). Faculty of Mechanical Engineering

    2008-07-01

    The paper is addressed to the development and use different criteria for evaluation of ash deposits collected during experimental co-firing of Bosnian coals with wooden biomass. Spruce saw dust was used for the co-firing tests with the Kakanj brown coal and with a lignite blend consisted of the Dubrave lignite and the Sikulje lignite. The coal/biomass mixtures at 93:7 %w and at 80:20 %w were tested. Experimental lab-scale facility PF entrained flow reactor is used for the co-firing tests. The reactor allows examination of fouling/slagging behaviors and emissions at various and infinitely variable process temperature which can be set at will in the range from ambient to 1560 C. Ash deposits are collected on two non-cooled ceramic probes and one water-cooled metal surface. Six different criteria are developed and used to evaluate behavior of the ash deposits on the probes: ash deposit shape, state and structure, which are analyzed visually - photographically and optically by a microscope, rate of adhesion and ash deposit strength, analyzed by physic acting to the ash deposits, and finally deposition rate, determined as a mass of the deposit divided by the collecting area and the time of collecting. Furthermore, chemical composition analysis and AFT of the ash deposits were also done to provide additional information on the deposits. (orig.)

  11. Discovery of chemoautotrophic symbiosis in the giant shipworm Kuphus polythalamia (Bivalvia: Teredinidae) extends wooden-steps theory.

    Science.gov (United States)

    Distel, Daniel L; Altamia, Marvin A; Lin, Zhenjian; Shipway, J Reuben; Han, Andrew; Forteza, Imelda; Antemano, Rowena; Limbaco, Ma Gwen J Peñaflor; Tebo, Alison G; Dechavez, Rande; Albano, Julie; Rosenberg, Gary; Concepcion, Gisela P; Schmidt, Eric W; Haygood, Margo G

    2017-05-02

    The "wooden-steps" hypothesis [Distel DL, et al. (2000) Nature 403:725-726] proposed that large chemosynthetic mussels found at deep-sea hydrothermal vents descend from much smaller species associated with sunken wood and other organic deposits, and that the endosymbionts of these progenitors made use of hydrogen sulfide from biogenic sources (e.g., decaying wood) rather than from vent fluids. Here, we show that wood has served not only as a stepping stone between habitats but also as a bridge between heterotrophic and chemoautotrophic symbiosis for the giant mud-boring bivalve Kuphus polythalamia This rare and enigmatic species, which achieves the greatest length of any extant bivalve, is the only described member of the wood-boring bivalve family Teredinidae (shipworms) that burrows in marine sediments rather than wood. We show that K. polythalamia harbors sulfur-oxidizing chemoautotrophic (thioautotrophic) bacteria instead of the cellulolytic symbionts that allow other shipworm species to consume wood as food. The characteristics of its symbionts, its phylogenetic position within Teredinidae, the reduction of its digestive system by comparison with other family members, and the loss of morphological features associated with wood digestion indicate that K. polythalamia is a chemoautotrophic bivalve descended from wood-feeding (xylotrophic) ancestors. This is an example in which a chemoautotrophic endosymbiosis arose by displacement of an ancestral heterotrophic symbiosis and a report of pure culture of a thioautotrophic endosymbiont.

  12. THE CALCULATION OF WOODEN CONSTRUCTIONS TAKING INTO ACCOUNT THE CREEP OF WOOD ON THE EXAMPLE OF A STATICALLY INDETERMINATE LENTICULAR BLOCKED TRUSS

    Directory of Open Access Journals (Sweden)

    I. S. Inzhutov

    2017-01-01

    Full Text Available Objectives The aim of the study is to refine the calculation of wooden constructions, in particular, to use variable elastic modulus  for the calculation of the second group of the limiting state in order to predict the deformations more accurately.Methods The study is carried out using the method of creep  consideration based on the use of either variable elastic modulus or  the “modulus of total deformations” for the calculations. These  moduli, besides the elastic, account for residual deformations, while  the fraction of the latter increases with increasing stress levels in the wooden elements.Results The calculation of statically indeterminate spatial timber-metallic lenticular block-truss loaded with a uniformly distributed  load is carried out. At the first stage, the construction was calculated using the elastic modulus of all wooden elements E =  10000 MPa in accordance with the set of rules (SP 64.13330.2011  (updated version of SNiP II-25-80. At the second stage, the elastic  modulus was replaced by variable, i.e., matched to the level of  stresses in the elements by means of interpolation. The obtained  deflection values are analysed and compared to the construction  limiting value. The study was conducted without taking into account the flexibility of node connections and defects of the wood, which  can also have a significant effect on the deflection value.Conclusion The use of a variable elastic modulus for calculations  significantly influences the magnitude of deformations (in our case,  deflections are increased by 30%. The study confirms the need to  take into account the creep of wood and refine the calculations of  wooden structures. Such approximating dependence at different moisture levels of wood will allow the calculation of wooden  structures to be performed at a higher theoretical level.

  13. 24 CFR 200.926 - Minimum property standards for one and two family dwellings.

    Science.gov (United States)

    2010-04-01

    ... acceptable code; and (2) Those portions of the CABO One and Two Family Dwelling Code designated by the HUD... must comply with: (1) The CABO One and Two Family Dwelling Code as identified in § 200.926b(a); and (2... (ii) Those portions of the CABO One and Two Family Dwelling Code designated by the HUD Field Office in...

  14. 24 CFR 206.51 - Eligibility of mortgages involving a dwelling unit in a condominium.

    Science.gov (United States)

    2010-04-01

    ... a dwelling unit in a condominium. 206.51 Section 206.51 Housing and Urban Development Regulations...; Endorsement Eligible Properties § 206.51 Eligibility of mortgages involving a dwelling unit in a condominium. If the mortgage involves a dwelling unit in a condominium, the project in which the unit is located...

  15. 25 CFR 91.7 - Permits to occupy land for dwelling purposes.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Permits to occupy land for dwelling purposes. 91.7... INDIAN VILLAGES, OSAGE RESERVATION, OKLAHOMA § 91.7 Permits to occupy land for dwelling purposes. The issuance of permits for the use of land for dwelling purposes within any village reserve described in § 91...

  16. 25 CFR 256.19 - Who performs the improvements, repairs, or replacement of my dwelling?

    Science.gov (United States)

    2010-04-01

    ... my dwelling? 256.19 Section 256.19 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR... dwelling? Independent or tribal repair or construction trades persons, home building contractors, or construction companies will perform the repairs, renovation, or replacement of your dwelling. [63 FR 10134, Mar...

  17. 49 CFR 24.204 - Availability of comparable replacement dwelling before displacement.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Availability of comparable replacement dwelling... General Relocation Requirements § 24.204 Availability of comparable replacement dwelling before displacement. (a) General. No person to be displaced shall be required to move from his or her dwelling unless...

  18. Lung doses from radon in dwellings and influencing factors

    International Nuclear Information System (INIS)

    Stranden, E.

    1980-01-01

    The radon concentration in Norwegian dwellings and the lung doses received by the Norwegian population are reported. The biological effects of these doses are discussed. The mean value of radon-daughters in Norwegian dwellings was found to be about 7x10 -3 WL (working levels). This corresponds to an annual exposure of about 0.3 WLM (working level months). From studies of the lung cancer statistics of Norway, this exposure may account for about 10% of the annual lung cancer cases in Norway. The variations in the radon concentration inside dwellings are discussed, and the influence of exhalation, ventilation and meteorological parameters upon the respiratory dosage is studied. From the risk estimates performed, the consequences of an increased indoor radon concentration due to reduced ventilation or introduction of building materials with high radium concentrations are discussed. From comparison of the population doses from different sources of radiation, it is evident that a possible future increase in the radon concentration in dwellings is one of the most serious radiation protection problems of our time. (author)

  19. Adaptive heating, ventilation and solar shading for dwellings

    NARCIS (Netherlands)

    Alders, E.E.

    2017-01-01

    Calculation of various strategies for the heating of, and the prevention of overheating in, a Dutch standard dwelling that includes (automated) adaptive ventilation systems and solar shading to maintain indoor temperatures at acceptably comfortable temperatures informs this analysis of the costs,

  20. Methods of radon remediation in Finnish dwellings; Asuntojen radonkorjauksen menetelmaet

    Energy Technology Data Exchange (ETDEWEB)

    Arvela, H.

    1995-12-01

    A study was made of remedial measures taken in dwellings with high indoor radon concentrations and the results obtained. The data regarding the remedial measures taken in 400 dwellings was obtained from a questionnaire study. The mean annual average indoor radon concentration before the remedies was 1.500 Bq/m{sup 3}, the concentration exceeding in nearly every house the action level of 400 Bq/m{sup 3}. After the measures were taken the mean indoor radon concentration was 500 Bq/m{sup 3}. The resulting indoor radon concentration was less than 400 Bq/m{sup 3} in 60 percent of the dwellings. The best results were achieved using sub-slab-suction and radon well. These methods effectively decrease both the flow of radon bearing air from soil into dwellings and the radon concentration of leakage air. Typical reduction rates in radon concentration were 70-95 percent. The action level was achieved in more than 70 percent of the houses. Sealing the entry routes and improvement of the ventilation resulted typically in reduction rates of 10-50 percent. The goal of the report is to give useful information for the house owners, the do-it-yourself-mitigators, the mitigation firms and the local authorities. The report includes practical guidance, price information and examples of remedial measures. (13 refs., 10 figs., 2 tabs.).

  1. Radon: guidance on protective measures for new dwellings

    International Nuclear Information System (INIS)

    1991-01-01

    This report gives guidance for reducing the presence of radon in new dwellings and hence reducing the risk to occupants of exposure to radon. This is a follow-up to the interim guidance of 1988. The report provides comprehensive practical details on the methods of protection including both primary and secondary measures. (UK)

  2. Environmental radon dosimetry in Indian dwellings and workplaces

    Energy Technology Data Exchange (ETDEWEB)

    Kant, K. [K.L.Mehta Dayanand College for Women, Dept. of Physics, Haryana (India); Upadhyay, S.B. [B.S.A. College, Dept. of Physics, Mathura, (India)

    2006-07-01

    Measurements of radon and its progeny in the dwellings and environment of workplaces are important because the radiation dose to human population due to inhalation of radon and its progeny contribute more than 50% of the total dose from natural sources and is the second leading cause of lung cancer after smoking. Recent experimental and epidemiological studies suggest that inhalation of radon progeny, which are the most important source of irradiation of the human respiratory track in workplace and domestic environment could be a cause of lung cancer. The quantification of iidual radon exposure over a long time period is one of the main issues. In the present study, we will report the results of radon monitoring carried out in the environment of workplaces of an oil refinery, LPG bottling plant, thermal power plant and gas power plant, besides the typical and modern Indian dwellings using alpha sensitive L.R.-115 type II solid-state nuclear track detectors in order to quantify the dose to the workers and the inhabitants. For comparison, the radon and its progeny levels were also measured in dwellings far away from the plants. Radon and its progeny levels were found higher in the environment of workplaces and dwellings in the vicinity of the plants. The details of the results obtained will be reported in the full paper. (authors)

  3. Environmental radon dosimetry in Indian dwellings and workplaces

    International Nuclear Information System (INIS)

    Kant, K.; Upadhyay, S.B.

    2006-01-01

    Measurements of radon and its progeny in the dwellings and environment of workplaces are important because the radiation dose to human population due to inhalation of radon and its progeny contribute more than 50% of the total dose from natural sources and is the second leading cause of lung cancer after smoking. Recent experimental and epidemiological studies suggest that inhalation of radon progeny, which are the most important source of irradiation of the human respiratory track in workplace and domestic environment could be a cause of lung cancer. The quantification of individual radon exposure over a long time period is one of the main issues. In the present study, we will report the results of radon monitoring carried out in the environment of workplaces of an oil refinery, LPG bottling plant, thermal power plant and gas power plant, besides the typical and modern Indian dwellings using alpha sensitive L.R.-115 type II solid-state nuclear track detectors in order to quantify the dose to the workers and the inhabitants. For comparison, the radon and its progeny levels were also measured in dwellings far away from the plants. Radon and its progeny levels were found higher in the environment of workplaces and dwellings in the vicinity of the plants. The details of the results obtained will be reported in the full paper. (authors)

  4. The spectrum of worry in the community-dwelling elderly.

    LENUS (Irish Health Repository)

    Golden, Jeannette

    2011-11-01

    In this study, we examine the prevalence and distribution of worry, its content, and its associations with quality of life and depression, based on a large sample of community-dwelling elderly. We will attempt to distinguish between pathological and non-pathological worry based on these associations.

  5. Long term monitoring of window opening behaviour in Danish dwellings

    DEFF Research Database (Denmark)

    Andersen, Rune Vinther; Toftum, Jørn; Olesen, Bjarne W.

    2009-01-01

    ABSTRACT: During the first eight months of 2008, measurements of occupant behaviour and eight environmental variables was carried out in 15 dwellings. Logistical regression was applied to infer the probability of open window as a function of the outdoor temperature. The results were compared...

  6. PM2.5 in Dutch dwellings due to cooking

    NARCIS (Netherlands)

    Jacobs, P.; Borsboom, W.A.; Kemp, R.E.J.

    2016-01-01

    Cooking emissions have long been seen as an odour problem. However recent studies showed that Particulate Matter (PM) is the main health risk of indoor air and cooking can be a major source. A small field study within 9 Dutch dwellings indicates that depending on the conditions cooking can have a

  7. Relationships between the forest dwelling people of South-West ...

    African Journals Online (AJOL)

    A brief study was carried out in South-West Mau region of the Mau Forest Complex in March 1993. The primary aim was to assess the importance of the tree hyrax, Dendrohyrax arboreus (A. Smith, 1827), to the local forest-dwelling people as a source of food and medicine and in their spiritual traditions, while investigating ...

  8. Occupant behaviour and control of indoor environment in Danish dwellings

    DEFF Research Database (Denmark)

    Andersen, Rune Vinther; Toftum, Jørn; Olesen, Bjarne W.

    2007-01-01

    Repeated surveys on occupant behaviour and indoor climate were carried out in Danish dwellings from September to October 2006 and again from February to March 2007. The summer survey comprised 933 respondents and the winter survey 636 respondents. The surveys were carried out by sending 5000...

  9. Establishing the level of exposure to radon gas in dwellings

    International Nuclear Information System (INIS)

    Karupa, Jackson Uakaningirua

    2016-04-01

    The main source of natural internal irradiation of man is radon and its decay products. In this study, the radon concentration levels in selected dwellings in Erongo region, Swakopmund, Namibia will be estimated using passive or active radon detector. The primary objective of the study is to measure and establish radon levels in selected dwellings in Erongo region, Swakopmund of Namibia. Measurements will be carried out for the period of twelve months and after three months period the detectors will be exchanged for laboratory analysis. The results obtained from the study will reveal the concentration of radon in most of the selected dwellings in Erongo region, Swakopmund, Namibia. Once Radon level is measured or identified, the results with data from work done in other environments in Africa and elsewhere will be compared. In case of high radon concentrations in dwelling, the occupants will be advised to ensure good ventilation practices as cost effective means of mitigation of indoor radon gas level in the area. (au)

  10. Meaningful spatial and temporal sequences of activities in dwelling

    NARCIS (Netherlands)

    Hematalikeikha, M.A.; Coolen, H.C.C.H.; Pourdeihimi, S.

    2014-01-01

    Human activities based on human needs are affected by affordances and meanings that occur in the dwelling. Activities over time and space have meaningful sequences. The meaningfulness of activities in the cultural framework is conditioned by its special temporality and spatiality. Also, temporal or

  11. Distribution and status of the desert-dwelling giraffe ( Giraffa ...

    African Journals Online (AJOL)

    The population density and distribution of desert dwelling giraffes was estimated in three study areas in the Hoanib River catchment, northwestern Namibia. Giraffe population densities (0.01 giraffe/km2) were equal to the lowest recorded in Africa with population numbers fluctuating over past decades. Sex ratios, herd sizes ...

  12. Resilience in Rural Community-Dwelling Older Adults

    Science.gov (United States)

    Wells, Margaret

    2009-01-01

    Context: Identifying ways to meet the health care needs of older adults is important because their numbers are increasing and they often have more health care issues. High resilience level may be one factor that helps older adults adjust to the hardships associated with aging. Rural community-dwelling older adults often face unique challenges such…

  13. Estimation of radon concentration in dwellings in and around ...

    Indian Academy of Sciences (India)

    Besides, it is also known that out of the total radiation dose received from natural and man-made sources, 60% of the dose is due to radon and its progeny. Taking this into account, an attempt has been made to estimate radon concentration in dwellings in and around Guwahati using aluminium dosimeter cups with CR-39 ...

  14. Compliance with building energy regulations for new-build dwellings

    International Nuclear Information System (INIS)

    Pan, Wei; Garmston, Helen

    2012-01-01

    Despite increasingly stringent building energy regulations worldwide, non-compliance exists in practice. This paper examines the profile of compliance with building energy regulations for new-build dwellings. In total 404 new-build dwellings completed in the UK from 2006 to 2009 were investigated. Only a third of these dwellings were evidenced as being compliant with Building Regulations Part L (England and Wales). Such low compliance casts a serious concern over the achievability of the UK Government's target for all new-build homes to be ‘zero carbon’ from 2016. Clearly evidenced was a lack of knowledge of Part L and its compliance requirements among the supply and building control sides of new-build dwellings. The results also indicate that the compliance profile was influenced by factors including Standard Assessment Procedure (UK Government's methodology for energy efficiency) calculation submissions, learning and experience of builders and building controls with Part L, use of Part L1A checklist, the introduction of energy performance certificate (EPC), build method, dwelling type, and project size. Better compliance was associated with flats over houses and timber frame over masonry. The use of EPC and Part L1A checklist should be encouraged. Key to addressing the lack of compliance with building energy regulations is training. -- Highlights: ► There exists a lack of compliance, worldwide, with building energy regulations. ► The implementation of England and Wales building energy regulations is problematic. ► Training, learning and experience of builders and building control are critical. ► Energy performance certificate and Part L 2006 checklist helped achieve compliance. ► Flats achieved better compliance over houses; and timber frame over masonry.

  15. Detection of differentially expressed genes in broiler pectoralis major muscle affected by White Striping - Wooden Breast myopathies.

    Science.gov (United States)

    Zambonelli, Paolo; Zappaterra, Martina; Soglia, Francesca; Petracci, Massimiliano; Sirri, Federico; Cavani, Claudio; Davoli, Roberta

    2016-12-01

    White Striping and Wooden Breast (WS/WB) are abnormalities increasingly occurring in the fillets of high breast yield and growth rate chicken hybrids. These defects lead to consistent economic losses for poultry meat industry, as affected broiler fillets present an impaired visual appearance that negatively affects consumers' acceptability. Previous studies have highlighted in affected fillets a severely damaged muscle, showing profound inflammation, fibrosis, and lipidosis. The present study investigated the differentially expressed genes and pathways linked to the compositional changes observed in WS/WB breast muscles, in order to outline a more complete framework of the gene networks related to the occurrence of this complex pathological picture. The biochemical composition was performed on 20 pectoralis major samples obtained from high breast yield and growth rate broilers (10 affected vs. 10 normal) and 12 out of the 20 samples were used for the microarray gene expression profiling (6 affected vs. 6 normal). The obtained results indicate strong changes in muscle mineral composition, coupled to an increased deposition of fat. In addition, 204 differentially expressed genes (DEG) were found: 102 up-regulated and 102 down-regulated in affected breasts. The gene expression pathways found more altered in WS/WB muscles are those related to muscle development, polysaccharide metabolic processes, proteoglycans synthesis, inflammation, and calcium signaling pathway. On the whole, the findings suggest that a multifactorial and complex etiology is associated with the occurrence of WS/WB muscle abnormalities, contributing to further defining the transcription patterns associated with these myopathies. © 2016 Poultry Science Association Inc.

  16. Eco-innovation of a wooden childhood furniture set: an example of environmental solutions in the wood sector.

    Science.gov (United States)

    González-García, Sara; García Lozano, Raúl; Moreira, M Teresa; Gabarrell, Xavier; Rieradevall i Pons, Joan; Feijoo, Gumersindo; Murphy, Richard J

    2012-06-01

    The environmental profile of a set of wood furniture was carried out to define the best design criteria for its eco-design. A baby cot convertible into a bed, a study desk and a bedside table were the objects of study. Two quantitative and qualitative environmental approaches were combined in order to propose improvement alternatives: Life Cycle Assessment (LCA) and Design for Environment (DfE). In the first case Life Cycle Assessment (LCA) was applied to identify the hot spots in the product system. As a next step, LCA information was used in eco-briefing to determine several improvement alternatives. A wood products company located in Catalonia (NE Spain) was assessed in detail, dividing the process into three stages: assembly, finishing and packaging. Ten impact categories were considered in the LCA study: abiotic depletion, acidification, eutrophication, global warming, ozone layer depletion, human toxicity, fresh water aquatic ecotoxicity, marine aquatic ecotoxicity, terrestrial ecotoxicity and photochemical oxidant formation. Two processes can be considered the key environmental factors: the production of the wooden boards and electricity, with contributions of 45-68% and 14-33% respectively depending on the impact categories. Subsequently, several improvement alternatives were proposed in the eco-design process (DfE) to achieve reductions in a short-medium period of time in the environmental impact. These eco-design strategies could reduce the environmental profile of the setup by 14%. The correct methodological adaptation of the concept of eco-briefing, as a tool for communication among environmental technicians and designers, the simplification of the analytical tool used and the LCA, could facilitate the environmental analysis of a product. The results obtained provide information that can help the furniture sector to improve their environmental performance. Copyright © 2012 Elsevier B.V. All rights reserved.

  17. A comparative study of functional properties of normal and wooden breast broiler chicken meat with NaCl addition.

    Science.gov (United States)

    Xing, Tong; Zhao, Xue; Han, Minyi; Cai, Linlin; Deng, Shaolin; Zhou, Guanghong; Xu, Xinglian

    2017-09-01

    The selection of broilers for augmented growth rate and breast has brought about wooden-breast (WB) muscle abnormalities, which caused substantial economic losses. The objective of this study was to compare water holding capacity, water mobility and distribution, salt-soluble protein (SSP) content, and protein profiles of normal and WB chicken meat with different additions of NaCl. Thirty WB and 30 normal chicken breasts were selected from a deboning line of a major Chinese processing plant at 2 to 3 h post mortem. Two different meat batters were formulated to 150 mg/g meat protein and different NaCl contents (0%, 1%, 2%, 3%, and 4%). Results indicated that as NaCl contents increased, the cooking loss of meat batters decreased (P meat showed different protein profiles, with myosin heavy chain exhibiting a higher intensity at ≥3% salt level. Low-field nuclear magnetic resonance (LF-NMR)revealed an increased T22 and higher P22 in raw WB meat compared to normal meat (P meat batters, WB meat batters had reduced T21 and lower immobilized water proportions at low NaCl contents (meat gels. Meat gels prepared from WB had a lower proportion of water within the myofibrillar protein matrix and a greater proportion of exuded bulk water at NaCl contents meat, meat batters and gels, water distribution and mobility of WB exhibited significant differences compared to normal meat. The addition of NaCl affected water mobility and distributions in meat batters, with a level of 3% NaCl eliminating the differences between processed normal and WB meat products. © 2017 Poultry Science Association Inc.

  18. Genetic Learning of Fuzzy Expert Systems for Decision Support in the Automated Process of Wooden Boards Cutting

    Directory of Open Access Journals (Sweden)

    Yaroslav MATSYSHYN

    2014-03-01

    Full Text Available Sawing solid wood (lumber, wooden boards into blanks is an important technological operation, which has significant influence on the efficiency of the woodworking industry as a whole. Selecting a rational variant of lumber cutting is a complex multicriteria problem with many stochastic factors, characterized by incomplete information and fuzzy attributes. About this property by currently used automatic optimizing cross-cut saw is not always rational use of wood raw material. And since the optimization algorithms of these saw functions as a “black box”, their improvement is not possible. Therefore topical the task of developing a new approach to the optimal cross-cutting that takes into account stochastic properties of wood as a material from biological origin. Here we propose a new approach to the problem of lumber optimal cutting in the conditions of uncertainty of lumber quantity and fuzziness lengths of defect-free areas. To account for these conditions, we applied the methods of fuzzy sets theory and used a genetic algorithm to simulate the process of human learning in the implementation the technological operation. Thus, the rules of behavior with yet another defect-free area is defined in fuzzy expert system that can be configured to perform specific production tasks using genetic algorithm. The author's implementation of the genetic algorithm is used to set up the parameters of fuzzy expert system. Working capacity of the developed system verified on simulated and real-world data. Implementation of this approach will make it suitable for the control of automated or fully automatic optimizing cross cutting of solid wood.

  19. 25 CFR 256.11 - What are the occupancy and square footage standards for a dwelling provided with Category C...

    Science.gov (United States)

    2010-04-01

    ... dwelling provided with Category C assistance? 256.11 Section 256.11 Indians BUREAU OF INDIAN AFFAIRS... footage standards for a dwelling provided with Category C assistance? A modest dwelling provided with... bedrooms Total dwelling square footage 1 (maximum) 1-3 2 2 900 4-6 2 3 1050 7 or more 2 4 31350 1 Total...

  20. 25 CFR 256.16 - Who is responsible for identifying what work will be done on my dwelling?

    Science.gov (United States)

    2010-04-01

    ... on my dwelling? 256.16 Section 256.16 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR... my dwelling? The servicing housing office is responsible for identifying what work is to be done on your dwelling or whether your dwelling will be replaced. This includes responsibility to communicate...

  1. Radon in dwellings the national radon survey Galway and Mayo

    International Nuclear Information System (INIS)

    McGarry, A.T.; Fennell, S.G.; Mackin, G.M.; Madden, J.S.; O'Colmain, M.

    1999-07-01

    This report presents the results of the final phase of the National Radon Survey carried out by the Radiological Protection Institute of Ireland. The counties included in this phase are Galway and Mayo. The average radon concentrations for the houses measured in these counties were 112 Bq/m 3 and 100 Bq/m 3 , respectively. The measurement data were grouped on the basis of the 10 km grid squares of the Irish National Grid System and used to predict the percentage of dwellings in each grid square which exceeds the Reference Level of 200 Bq/m 3 . Grid squares where this percentage is predicted to be 10% or higher are designated High Radon Areas. The health effects of exposure to high radon levels are discussed and recommendations are made regarding both new and existing dwellings. (author)

  2. Radon in dwellings the national radon survey Cork and Kerry

    International Nuclear Information System (INIS)

    McGarry, A.T.; Fennell, S.G.; Mackin, G.M.; Madden, J.S.

    1998-07-01

    This report presents the results of the third phase of the National Radon Survey carried out by the Radiological Protection Institute of Ireland. The counties included in this phase are Cork and Kerry. The average radon concentrations for the houses measured in these counties were 76 Bq/m 3 and 70 Bq/m 3 . The measurement data were grouped on the basis of the 10 km grid squares of the Irish National Grid System and used to predict the percentage of dwellings in each grid square which exceeds the Reference Level of 200 Bq/m 3 . Grid squares where this percentage is predicted to be 10% or higher are designated High Radon Areas. The health effects of exposure to high radon levels are discussed and recommendations are made regarding both new and existing dwellings. (author)

  3. Cost-benefit of ventilation and averted radon in dwellings

    International Nuclear Information System (INIS)

    Katona, T.; Kanyar, B.

    2003-01-01

    To assess an economically optimal ventilation rate we have introduced a cost-benefit analysis taking into account the cost of heating and benefit of averted dose due to ventilation. The cost of heating due to the elevated ventilation for mitigation of radon content in dwellings can be compensated by the monetary benefit of the averted dose, in case of higher (annually 3-10 mSv) exposure. During the heating season the economically optimal ventilation takes 0.1-0.5 h -1 , meanwhile the radon concentration in the indoor air decreases to 200-800 Bq/m 3 , depending on the exhalation of radon, number of persons living in the dwellings and other local parameters. Our results from the optimal planning correspond to the radon concentrations recommended by the international organizations as action levels. In general, the periodic ventilation in daytime provides a higher averted dose than the constant one in case of the same heating cost. (authors)

  4. International proposal for an acoustic classification scheme for dwellings

    DEFF Research Database (Denmark)

    Rasmussen, Birgit

    2014-01-01

    Acoustic classification schemes specify different quality levels for acoustic conditions. Regulations and classification schemes for dwellings typically include criteria for airborne and impact sound insulation, façade sound insulation and service equipment noise. However, although important...... classes, implying also trade barriers. Thus, a harmonized classification scheme would be useful, and the European COST Action TU0901 "Integrating and Harmonizing Sound Insulation Aspects in Sustainable Urban Housing Constructions", running 2009-2013 with members from 32 countries, including three overseas...... for quality of life, information about acoustic conditions is rarely available, neither for new or existing housing. Regulatory acoustic requirements will, if enforced, ensure a corresponding quality for new dwellings, but satisfactory conditions for occupants are not guaranteed. Consequently, several...

  5. Window opening behaviour modelled from measurements in Danish dwellings

    DEFF Research Database (Denmark)

    Andersen, Rune Korsholm; Fabi, Valentina; Toftum, Jorn

    2013-01-01

    environment.Measurements of occupant's window opening behaviour were conducted in 15 dwellings in Denmark during eight months. Indoor and outdoor environmental conditions were monitored in an effort to relate the behaviour of the occupants to the environmental conditions. The dwellings were categorized......A method of defining occupants' window opening behaviour patterns in simulation programs, based on measurements is proposed.Occupants' window opening behaviour has a strong effect on indoor environment and the energy consumed to sustain it. Only few models of window opening behaviour exist...... and these are solely based on the thermal indoor/outdoor environment. Consequently, users of simulation software are often left with little or no guidance for the modelling of occupants' window opening behaviour, resulting in potentially large discrepancies between real and simulated energy consumption and indoor...

  6. A search profile for dwellings with elevated radon levels

    DEFF Research Database (Denmark)

    Damkjær, A.; Andersen, C.E.; Majborn, B.

    1996-01-01

    A search profile for dwellings with elevated radon levels has been employed to investigate possibly radon-prone areas in Denmark and to find houses suitable for radon mitigation studies. The profile is defined as dwellings which are single-family houses with slab-on-grade foundation or partly...... basement/slab-on-grade foundation built on either fractured granitic basement rocks, or fractured limestone. Clayey till areas were also included in the profile in order to confirm earlier findings. Three areas representing these surface geologies were selected for indoor radon measurements with CR-39...... track detectors, and a total of 200 houses matching the profile underwent radon measurements during the winter 1994-95. The distribution of the measured radon concentrations were found in most cases to comply with log-normal distributions. Measurements in the living rooms of houses in each of the three...

  7. Suspended particulate matter in dwellings - the impact of tobacco smoking

    Energy Technology Data Exchange (ETDEWEB)

    Revsbech, P.; Korsgaard, J.; Lundqvist, G.R.

    1987-01-01

    The indoor concentration of suspended particulate matter (SPM) was measured in 44 retrofitted and tight dwellings, which had electric cooking and were central heated and where the basic ventilation rate in median amounted 0.23 air changes per hour as measured with a tracer dilution method. The indoor concentration of SPM was in medium 230 ..mu..g/m/sup 3/ with a strong correlation to the tobacco consumption (r/sub s/ = 0.716), but with no correlation to the frequency of airing or the basic ventilation rate. Tobacco smoking seems to be the main indoor source of SPM in contemporary dwellings. The importance of these findings is underlined by epidemiologic studies on passive smoking and health. Air quality standards for the ambient air are based on certain risk groups such as infants, children, persons with chronic obstructive lung disorders, and indoor air standards should be based on the same concepts of health protection.

  8. Dwell time considerations for large area cold plasma decontamination

    Science.gov (United States)

    Konesky, Gregory

    2009-05-01

    Atmospheric discharge cold plasmas have been shown to be effective in the reduction of pathogenic bacteria and spores and in the decontamination of simulated chemical warfare agents, without the generation of toxic or harmful by-products. Cold plasmas may also be useful in assisting cleanup of radiological "dirty bombs." For practical applications in realistic scenarios, the plasma applicator must have both a large area of coverage, and a reasonably short dwell time. However, the literature contains a wide range of reported dwell times, from a few seconds to several minutes, needed to achieve a given level of reduction. This is largely due to different experimental conditions, and especially, different methods of generating the decontaminating plasma. We consider these different approaches and attempt to draw equivalencies among them, and use this to develop requirements for a practical, field-deployable plasma decontamination system. A plasma applicator with 12 square inches area and integral high voltage, high frequency generator is described.

  9. Moisture diagnostic of a failured roof drainage situated behind a parapet wall and a subsequent condensate influence to a wooden construction

    Directory of Open Access Journals (Sweden)

    Remeš Josef

    2017-01-01

    increase in a layout of the building and an installation of a rainwater drainage core is not necessary in such cases. In case more of negative effects accumulate, such as an improper thermal insulation quality or insufficient thickness of the thermal insulation, significant problems may appear hand in hand with using of the building. These problems are generally represented by a moisture appearance in the inflow area. What more, this is not always detected and a major cause can be determined very hardly. This article deals with possible solutions for the wooden construction failure caused by the moisture that may emerge as an improper inflow layout consequence.

  10. Analysis of a photovoltaic dwelling in remote sites

    Energy Technology Data Exchange (ETDEWEB)

    Eliot, P

    1982-01-01

    This work is a design analysis of autonomous or quasi-autonomous photovolaic system suited to dwellings on remote sites in France; this study allowed to establish ''curves'' of sizing related to several performance, from which it is possible to estimate costs (under many conditions of house occupancy, of climates). The interest of a back-up generating sit for the permanent resident is studied. Then, an adaptation and an improvement of existing analysis tools are looked.

  11. Seasonal variation of radon concentration in different rooms of dwellings

    International Nuclear Information System (INIS)

    Jayasheelan, A.; Manjunatha, S.; Chandrashekaraiah, G.; Shankar, P.; Umeshareddy, K.; Ningappa, C.

    2016-01-01

    Indoor air is a dominant exposure for humans, where more than half of the body's intake during a lifetime. The main natural sources of indoor radon are soil, building materials like sand, rocks, cement, marble, bricks, ceramics, natural gas and the underground-derived water supply. In the present research, dwellings with similar building style (similar floorings and dimensions) from Tumkur city were studied for indoor radon, thoron and their progeny measurements for various seasons

  12. Comparison of sine dwell and broadband methods for modal testing

    Science.gov (United States)

    Chen, Jay-Chung

    1989-01-01

    The objectives of modal tests for large complex spacecraft structural systems are outlined. The comparison criteria for the modal test methods, namely, the broadband excitation and the sine dwell methods, are established. Using the Galileo spacecraft modal test and the Centaur G Prime upper stage vehicle modal test as examples, the relative advantage or disadvantage of each method is examined. The usefulness or shortcomings of the methods are given from a practical engineering viewpoint.

  13. On sine dwell or broadband methods for modal testing

    Science.gov (United States)

    Chen, Jay-Chung; Wada, Ben K.

    1987-01-01

    For large, complex spacecraft structural systems, the objectives of the modal test are outlined. Based on these objectives, the comparison criteria for the modal test methods, namely, the broadband excitation and the sine dwell methods are established. Using the Galileo spacecraft modal test and the Centaur G Prime upper stage vehicle modal test as examples, the relative advantages or disadvantages of each method are examined. The usefulness or shortcoming of the methods are given from a practicing engineer's view point.

  14. Measurement Techniques for Radon in Mines, Dwellings and the Environment

    International Nuclear Information System (INIS)

    Snihs, J.O.

    1983-06-01

    Definitions and units appropriate for radon and radon daughters are given. The principle methods of detection are ionization chamber, scintillation technique, nuclear track detector, thermoluminescent discs and alpha spectrometry. The activity concentration is determined by grab sampling and subsequent measurement, frequent or continuous grab sampling and measurement and continuous sampling and long time integrated measurement. Sampling and measurement strategies for mines, dwellings and the environment are discussed. (author)

  15. Basement depressurization using dwelling mechanical exhaust ventilation system

    International Nuclear Information System (INIS)

    Collignan, B.; O'Kelly, P.; Pilch, E.

    2004-01-01

    The mechanical ventilation exhaust system is commonly used in France to generate air renewal into building and especially into dwelling. It consists of a permanent mechanical air extraction from technical rooms (kitchen, bathrooms and toilets) using a unique fan connected to exhaust ducts. Natural air inlets in living room and bed rooms ensure an air flow from living spaces towards technical rooms. To fight against radon into building, the most recognised efficient technique is the Soil Depressurization System (S.D.S.) consisting in depressurizing the house basement. The aim of this study is to test the ability of the dwelling mechanical ventilation system to depressurize the basement in conjunction with air renewal of a house. For that purpose, a S.D.S. has been installed in an experimental house at CSTB during its construction. At first, tests undertaken with a variable velocity fan connected to the S.D.S. have characterised the permeability of the basement. It is shown that basement can be depressurized adequately with a relatively low air flow rate. At a second stage, S.D.S. has been connected to the exhaust ventilation fan used for the mechanical ventilation of the house. Results obtained show the ability of such ventilation system to generate sufficient depressurization in the basement and to ensure simultaneously adequate air change rate in the dwelling. (author)

  16. Measurement of radon concentration in Taiz city dwellings-yemen

    International Nuclear Information System (INIS)

    Ali, Taher M.; Ahmed, Hayel A.; Ismail, Rokhsana M.

    2001-01-01

    Radon gas considered being a high part of natural radiation background. Emitting alpha particles; radon daughters may be deposited into the lungs and cause health hazards. For this reason, estimation of radon levels in dwellings was done in many countries. In our country, Radon group in the Department of physics, University of Aden has been studied radon level in Aden dwelling. The present study is about the radon level in Taiz City - Yemen. Passive diffusion dosimeters containing (SSNTD s ) Cr - 39 detectors were used in the present work. 125 dosimeters were distributed into dwellings of ten regions in Taiz City. Results obtained show that Rn 222 levels vary between 4 Bq/m 3 and 99 Bq/m 3 . The average concentration in Al-Hasseb district is 23 Bq/m 3 and in Algumhuri hospital district is 53 Bq/m 3 . In other regions it varies between the two values. Whereas the general average in the Taiz City is 34 Bq/m 3 . (author)

  17. Mobile work, multilocal dwelling and spaces of wellbeing.

    Science.gov (United States)

    Gorman-Murray, Andrew; Bissell, David

    2018-05-01

    Mobile work is increasingly common. For our purposes, mobile work entails long-distance commuting arrangements with periods living away from the primary domestic residence that may be considered 'home'. Mobile work reconfigures the relational fabric of 'home', introducing multilocal mooring points into worker's lives, and thus reshaping the spatial and temporal patterns and meanings of dwelling. Geography and cognate disciplines have begun to investigate the spatialities and temporalities of mobile work and multilocal dwelling, including the complexities of space-time management, but as yet little attention has been given to implications and impacts on the wellbeing of workers and their families - this is despite growing concern for worker and family wellbeing in some mobile work sectors, such as FIFO mining. Wellbeing is also a complex and multivalent concept, taking in objective and subjective dimensions, including health indicators and quality of life. In this context, this paper reviews recent literature on mobile work and multilocal dwelling and geographies of wellbeing to identify productive intersections for conceptual and empirical development. We suggest that provocations about space-times of wellbeing (Fleuret and Prugneau, 2015) and wellbeing as a relational, situated assemblage (Atkinson, 2013) are productive for analysing wellbeing in a context of mobility and multilocality. Copyright © 2018 Elsevier Ltd. All rights reserved.

  18. Actual heating energy savings in thermally renovated Dutch dwellings

    International Nuclear Information System (INIS)

    Majcen, Daša; Itard, Laure; Visscher, Henk

    2016-01-01

    The register of the Dutch social housing stock was analysed, containing 300.000 dwellings, renovated between 2010 and 2013. The main objective was twofold: to evaluate the performance gap in these dwellings before and after the renovation and to establish what renovation measures achieve the highest reduction of consumption, particularly in practice (actual savings). The results showed large performance gaps in dwellings with low R and high U values, local heating systems, changes from a non-condensing into a condensing boiler and upgrades to a natural ventilation system. Regarding the actual effectiveness of renovation measures, replacement of old gas boilers with more efficient ones yields the highest energy reduction, followed by deep improvements of windows. Installing mechanical ventilation yields a small reduction compared to other measures, but still much larger than theoretically expected. The paper shows once more that the calculation method currently in use cannot be considered accurate if compared to actual consumption. The study demonstrated that unrealistic theoretical efficiencies of heating systems and insulation values are causing a part of the performance gap. Nowadays, large datasets of buildings thermal performance and actual consumption offer an opportunity to improve these misconceptions. - Highlights: • Performance gap is lower in more efficient buildings. • Replacements of gas boilers – the most energy reduction among renovation measures. • Replacing the ventilation system yields a much larger reduction than expected. • How well are the standard values of the calculation methods defined? • Provide large public building performance databases including actual use data.

  19. Increased gait unsteadiness in community-dwelling elderly fallers

    Science.gov (United States)

    Hausdorff, J. M.; Edelberg, H. K.; Mitchell, S. L.; Goldberger, A. L.; Wei, J. Y.

    1997-01-01

    OBJECTIVE: To test the hypothesis that quantitative measures of gait unsteadiness are increased in community-dwelling elderly fallers. STUDY DESIGN: Retrospective, case-control study. SETTING: General community. PARTICIPANTS: Thirty-five community-dwelling elderly subjects older than 70 years of age who were capable of ambulating independently for 6 minutes were categorized as fallers (age, 82.2 +/- 4.9 yrs [mean +/- SD]; n = 18) and nonfallers (age, 76.5 +/- 4.0 yrs; n = 17) based on history; 22 young (age, 24.6 +/- 1.9 yrs), healthy subjects also participated as a second reference group. MAIN OUTCOME MEASURES: Stride-to-stride variability (standard deviation and coefficient of variation) of stride time, stance time, swing time, and percent stance time measured during a 6-minute walk. RESULTS: All measures of gait variability were significantly greater in the elderly fallers compared with both the elderly nonfallers and the young subjects (p elderly fallers was similar to that of the nonfallers. There were little or no differences in the variability measures of the elderly nonfallers compared with the young subjects. CONCLUSIONS: Stride-to-stride temporal variations of gait are relatively unchanged in community-dwelling elderly nonfallers, but are significantly increased in elderly fallers. Quantitative measurement of gait unsteadiness may be useful in assessing fall risk in the elderly.

  20. A phantom for verification of dwell position and time of a high dose rate brachytherapy source

    International Nuclear Information System (INIS)

    Madebo, M.; Kron, T.; Pillainayagam, J.; Franich, R.

    2012-01-01

    Accuracy of dwell position and reproducibility of dwell time are critical in high dose rate (HDR) brachytherapy. A phantom was designed to verify dwell position and dwell time reproducibility for an Ir-192 HDR stepping source using Computed Radiography (CR). The central part of the phantom, incorporating thin alternating strips of lead and acrylic, was used to measure dwell positions. The outer part of the phantom features recesses containing different absorber materials (lead, aluminium, acrylic and polystyrene foam), and was used for determining reproducibility of dwell times. Dwell position errors of <1 mm were easily detectable using the phantom. The effect of bending a transfer tube was studied with this phantom and no change of clinical significance was observed when varying the curvature of the transfer tube in typical clinical scenarios. Changes of dwell time as low as 0.1 s, the minimum dwell time of the treatment unit, could be detected by choosing dwell times over the four materials that produce identical exposure at the CR detector.

  1. The effect of tubing dwell time on insulin adsorption during intravenous insulin infusions.

    Science.gov (United States)

    Thompson, Cecilia D; Vital-Carona, Jessica; Faustino, E Vincent S

    2012-10-01

    Insulin adsorbs to plastic tubing, which decreases the concentration of an insulin solution delivered from an intravenous infusion set. Dwelling insulin within tubing before starting the infusion decreases adsorption but delays treatment initiation and wastes time in infusion preparation. The lack of data on dwell time effects results in wide variability in practice. We aim to determine the effect of dwell time on insulin concentration from intravenous infusion tubing. In this in vitro study, we used insulin solutions with concentrations of 0.1 unit/mL, 1 unit/mL, and 10 units/mL. Each solution dwelled in intravenous infusion sets for 0, 15, 30, or 60 min. After the dwell, we measured insulin concentrations from the solution bags and tubing. We repeated each insulin concentration-dwell time combination five times. Comparisons were performed using analyses of variance. For each of the three insulin concentrations, the mean insulin concentrations from the tubing were not significantly different between dwell times. Duration of dwell time did not affect insulin adsorption in polypropylene intravenous infusion sets. We recommend that following a 20-mL flush, insulin infusions can be started without any dwell time. Removal of dwell times may improve clinical practice by minimizing preparation time and will allow faster initiation of insulin infusion therapy.

  2. Factors Influencing Dwell Fatigue Cracking in Notches of Powder Metallurgy Superalloys

    Science.gov (United States)

    Gabb, T. P.; Telesman, J.; Ghosn, L.; Garg, A.; Gayda, J.

    2011-01-01

    The influences of heat treatment and cyclic dwells on the notch fatigue resistance of powder metallurgy disk superalloys were investigated for low solvus high refractory (LSHR) and ME3 disk alloys. Disks were processed to produce material conditions with varied microstructures and associated mechanical properties. Notched specimens were first subjected to baseline dwell fatigue cycles having a dwell at maximum load, as well as tensile, stress relaxation, creep rupture, and dwell fatigue crack growth tests at 704 C. Several material heat treatments displayed a bimodal distribution of fatigue life with the lives varying by two orders-of-magnitude, while others had more consistent fatigue lives. This response was compared to other mechanical properties, in search of correlations. The wide scatter in baseline dwell fatigue life was observed only for material conditions resistant to stress relaxation. For selected materials and conditions, additional tests were then performed with the dwells shifted in part or in total to minimum tensile load. The tests performed with dwells at minimum load exhibited lower fatigue lives than max dwell tests, and also exhibited early crack initiation and a substantial increase in the number of initiation sites. These results could be explained in part by modeling evolution of peak stresses in the notch with continued dwell fatigue cycling. Fatigue-environment interactions were determined to limit life for the fatigue cycles with dwells.

  3. Occurrence of white striping and wooden breast in broilers fed grower and finisher diets with increasing lysine levels.

    Science.gov (United States)

    Cruz, R F A; Vieira, S L; Kindlein, L; Kipper, M; Cemin, H S; Rauber, S M

    2017-02-01

    Two experiments were conducted to evaluate the prevalence and severity of white striping (WS) and wooden breast (WB) in breast fillets from broilers fed diets with increasing digestible Lysine (dLys) from 12 to 28 d (Exp. 1) and from 28 to 42 d (Exp. 2). Trials were sequentially conducted using one-d-old male, slow-feathering Cobb 500 × Cobb broilers, both with 6 treatments and 8 replicates. Increasing dLys levels were equally spaced from 0.77 to 1.17% in Exp. 1 and from 0.68 to 1.07% in Exp. 2. The lowest dLys diet was not supplemented with L-Lysine (L-Lys) in either one of the studies and all other essential amino acid (AA) met or exceeded current commercial recommendations such that their dietary concentrations did not limit broiler growth. Four birds per pen were randomly selected from each replication and processed at 35 and 42 d in Exp. 1 and Exp. 2, respectively. Deboned breast fillets (Pectoralis major) were submitted to a 3 subject panel evaluation to detect the presence of WS and WB, as well as to provide scores of WS (0-normal, 1-moderate, 2-severe) and WB (0-normal, 1-moderate light, 2-moderate, 3-severe). Increasing the level of dLys had a positive effect on BW, carcass, and breast weight, as well as breast yield. White striping and WB prevalences were 32.3 and 85.9% in Exp. 1 and 87.1 and 89.2% in Exp. 2. Birds fed diets not supplemented with L-Lys had the lowest average WS and WB scores (0.22 and 0.78 in Exp. 1 and 0.61 and 0.68 in Exp. 2). White striping and WB presented linear responses to performance variables in Exp. 1, whereas quadratic responses were observed for all variables in Exp. 2. In conclusion, increasing the level of dLys improved growth performance and carcass traits as well as induced the occurrence and severity of WS and WB lesions. © 2016 Poultry Science Association Inc.

  4. Radon Activity measurements in Drinking Water and in Indoors of Dwellings of Dwellings, using RAD7

    International Nuclear Information System (INIS)

    Mehra, R.; Badhan, K.; Sonkawade, R.G.

    2011-01-01

    The purpose of this study is to investigate the radon levels of groundwater being used for drinking and indoor radon levels in the environs of villages/towns of Hoshiarpur district of Punjab, India, to determine the health hazards. Radon concentrations in the collected water samples were measured with RAD7 an electronic radon detector connected to a RAD- H 2 O accessory (Durridge Co., USA). In the setup, the RAD7 detector was used for measuring radon in water by connecting it with a bubbling kit which enables to degas radon from a water sample into the air in a closed loop. A sample of water was taken in a radon-tight reagent bottle of 250 ml capacity connected in a close circuit with a zinc sulphide coated detection chamber which acts as scintillator to detect alpha activity and a glass bulb containing calcium chloride to absorb the moisture. Air was then circulated in a closed circuit for a period of 5-10 min until the radon was uniformly mixed with the air and the resulting alpha activity was recorded and it directly gives the radon concentration. The measured radon concentration in drinking water ranges from 2.03 BqL -1 to 6.65 BqL -1 with an average value of 4.27 BqL -1 . The measured values of radon concentration in drinking water are well within the range (4 to 40 BqL -1 ) suggested for radon concentration in water for human consumption by the United Nations Scientific Committee on the Effects of Atomic Radiation. The measured values of indoor radon concentration in dwellings of the same area vary from 10 Bqm -3 to 28.2 Bqm -3 with an average value of 20.28 Bqm -3 . The measured values for drinking water and for indoor air for the study area suggest that the area is safe for residents and there is no significant threat to the population as per as radon concentration is concerned

  5. Projeto de caixa de madeira para manga (Mangifera Indica L. Project of wooden boxes for mangoes (Mangifera Indica L.

    Directory of Open Access Journals (Sweden)

    Bárbara Janet Teruel

    2009-06-01

    is proposed, based on computer simulations, optimization and experimental validation, trying to minimize the amount of wood associated with structural and ergonomic aspects and the effective area of the openings. Three box prototypes were designed and built using straight laths with different configurations and areas of openings (54% and 36%. The cooling efficiency of Tommy Atkins mango (Mangifera Indica L. was evaluated by determining the cooling time for fruit packed in the wood models and packed in the commercially used cardboard boxes, submitted to cooling in a forced-air system, at a temperature of 6ºC and average relative humidity of 85.4±2.1%. The Finite Element Method was applied, for the dimensioning and structural optimization of the model with the best behavior in relation to cooling. All wooden boxes with fruit underwent vibration testing for two hours (20 Hz. There was no significant difference in average cooling time in the wooden boxes (36.08±1.44 min; however, the difference was significant in comparison to the cardboard boxes (82.63±29.64 min. In the model chosen for structural optimization (36% effective area of openings and two side laths, the reduction in total volume of material was 60% and 83% in the cross section of the columns. There was no indication of mechanical damage in the fruit after undergoing the vibration test. Computer simulations and structural study may be used as a support tool for developing projects for boxes, with geometric, ergonomic and thermal criteria.

  6. Portable XRF as a valuable device for preliminary in situ pigment investigation of wooden inventory in the Trski Vrh Church in Croatia

    International Nuclear Information System (INIS)

    Desnica, V.; Skaric, K.; Mudronja, D.; Pavlicic, M.; Peranic, I.; Jembrih-Simbuerger, D.; Schreiner, M.; Fazinic, S.; Jaksic, M.

    2008-01-01

    The aim of this work was the investigation of pigments from the painted wooden inventory of the pilgrimage church of Saint Mary of Jerusalem in Trski Vrh - one of the most beautiful late-baroque sacral ensembles in Croatia. Being an object of high relevance for the national cultural heritage, an extensive research on the wooden polychromy was undertaken in order to work out a proposal for a conservation treatment. It consists mainly of two painted and gilded layers (the original one from the 18th century and a later one from 1903), partly overpainted during periodic conservation treatments in the past. The approach was to carry out extensive preliminary in situ pigment investigations using a portable XRF (X-ray fluorescence) device, and only the problems not resolved by this method on site were further analyzed using sophisticated laboratory equipment. Therefore, the XRF results acted as a valuable guideline for subsequent targeted sampling actions, thus minimizing the sampling damage. Important questions not answered by XRF (identification of organic pigments, ultramarine, etc.) were subsequently resolved using additional ex situ laboratory methods, primarily μ-PIXE (particle-induced X-ray emission) at the nuclear microprobe of the Rudjer Boskovic accelerator facility as well as μ-Raman spectroscopy at the Institute of the Academy of Fine Arts in Vienna. It is shown that by the combination of these often complementary methods a thorough characterization of each pigment can be obtained, allowing for a proper strategy of the conservation treatment. (orig.)

  7. Equilibrium moisture content of wood at different temperature/moisture conditions in the cladding of wooden constructions and in the relation to their reliability and service life

    Directory of Open Access Journals (Sweden)

    Zdeňka Havířová

    2010-01-01

    Full Text Available One of the natural properties of wood and wood-based materials is their soaking capacity (hy­gro­sco­pi­ci­ty. The moisture content of wood and building constructions of wood and wood based materials significantly influences the service life and reliability of these constructions and buildings. The equilibrium weight moisture content of built-in wood corresponding to temperature/moisture conditions inside the cladding has therefore a decisive influence on the basic requirements placed on building constructions. The wood in wooden frame cladding changes its moisture content depending on temperature and moisture conditions of the environment it is built into. The water vapor condensation doesn’t necessarily have to occur right in the wooden framework of the cladding for the equilibrium moisture content to rise over the level permissible for the reliable function of a given construction. In spite of the fact that the common heat-technical assessment cannot be considered fully capable of detecting the effects of these factors on the functional reliability of wood-based constructions and buildings, an extension has been proposed of the present method of design an assessment of building constructions according to the ČSN 73 0540 standard regarding the interpretation of equilibrium moisture content in relation to the temperature/moisture conditions and their time behavior inside a construction.

  8. Radon in Dwellings in the Republic of Kalmykia. Results from the National Radon Survey 2006-2007

    International Nuclear Information System (INIS)

    Aakerblom, Gustav; German, Olga; Soederman, Ann-Louise; Stamat, Ivan; Venkov, Vladimir

    2009-02-01

    The National Radon Survey in the Republic of Kalmykia, Russian Federation during 2006-2007 was carried out in a cooperation project between the Swedish Radiation Protection Authority (SSI) and the Russian Institute of Radiation Hygiene (RIRH). In August 2006 SSI, RIRH, federal and local authorities carried out a field study in Kalmykia when radon daughter measurements (equilibrium equivalent radon concentrations in the air) and gamma radiation measurements were made in 103 buildings. Gamma spectrometry measurements were made at several sites. During the visit the cooperating parties devoted some time to the education of local authorities on radon related issues. During three months in the winter season 2006-2007, long term radon trace measurements were made in 525 randomly chosen dwellings in the Republic of Kalmykia. The radon gas activity varied between 3 and 973 Bq/m 3 , with a mean value of 122 Bq/m 3 . In 19 of a total of 835 measurement points, the radon activity exceeded the maximum permitted value in Russia of 200 Bq/m 3 of EERC. The year-round radon trace measurement were made in 20 houses in Elista, the capital of the Republic of Kalmykia, for comparison with the three-month measurements. The year-round measurements showed some higher values for the radon activity, and a correction factor of 0.85 was applied. Using data on the number of people living in detached houses and apartments, and applying the radon activities measured, the number of new lung cancer cases caused by radon was calculated to be 20 to 40 of the 100 new cases reported annually. The methods of construction of the dwellings in Kalmykia is greatly influenced by the history and culture. Most of them were built after World War II and there are only a few that are newly built because of the poor economic situation and the low population growth rate in the Republic. Most people live in detached houses, one-storied with 3-5 rooms, built directly on the ground or on coquina blocks or on a cast

  9. Dwelling in the Apocalypse: Capitalist Modernity, Antimodernism, Zombies

    Directory of Open Access Journals (Sweden)

    Hrvoje Tutek

    2017-09-01

          On the one hand, if the adverbial “in a global age” is taken to denote a radical historical caesura between “our age” and the age in which the concept was first deployed, one has to prove that the caesura is indeed not only historically operative but legitimate on an ontological level. This would, however, be a futile attempt: there hardly exists an essential, qualitative difference between the ontological regime of “our global age” and the one sketched in Heidegger's 1954 essay “Building Dwelling Thinking.” We have not been blessed by any epochal turns, despite important switches – to move for a second to a different register—in regimes of accumulation. Thus, it may be concluded, the ontological question about the state of “dwelling in a precarious age” has already been posed and answered by Heidegger himself—from an ontological perspective, he is our contemporary. And of course, to such question there can in fact be only one answer: it is the same “metaphysics” that has precluded the possibility of “dwelling” (initiated a “denial of dwelling” as it is put here throughout modernity that gave rise to our age as global. But then to avoid the mistake sketched out above and the repetition of an already accomplished analysis, the question as it is posed for us here (“what does it mean to dwell in a global age” should be taken as a politicization of the original concept, foreign to a puritanically ontological Heideggerian diagnostics, although building on its foundations: what is to be done historically at this moment to enter “dwelling”?

  10. Effect of weatherization on radon levels in Maine dwellings

    International Nuclear Information System (INIS)

    Hess, C.T.; Hill, R.C.

    1984-01-01

    A study of radon concentration in the air of 30 Maine dwellings was performed before and after weatherization during November 1982-May 1983. The average radon (.75 pCi/1) was lower than a group of houses in a previous study in October 1980-May 1981 (3.1 pCi/1). The after-weatherization levels show an increase over the before-weatherization levels. Trailers were found to have lower radon concentrations than houses. The maximum value measured was 3.2 pCi/1 before and 6.2 pCi/1 after correction for season of exposure. 13 references, 5 figures, 3 tables

  11. Assessing the risks from exposure to radon in dwellings

    International Nuclear Information System (INIS)

    Walsh, P.J.; Lowder, W.M.

    1983-07-01

    The factors used to assess the radiation dose and health risks from human exposure to radon in dwellings are critically reviewed in this summary. Sources of indoor radon and determinants of air concentrations and exposure levels are given as well as the uncertainties that exist in their formulation. Methods of assessing health effects from inhalation of radon and its progeny are discussed with emphasis on dosimetry of radon daughters and formulation of risk per dose values. Finally, methods of assessing risks for general population exposures to indoor radon concentrations are treated

  12. Trends and reduction scenarios for Rn 222 concentrations in dwellings

    International Nuclear Information System (INIS)

    Blaauboer, R.O.; Heling, R.

    1993-07-01

    In the title study the effects of possible measures on the average radon concentration in Dutch dwellings is evaluated. Attention is paid to the trends in building methods, the use of building materials and using the trends as a reference development (scenario 0). A total of seven scenarios has been evaluated. The model that was used was kept rather simple, because most of the parameter values are average values. The measures studied were selected on the basis of cost-effectiveness. All measures are based on reducing the infiltration of radon from the crawl space under the house to the living quarters and reducing the exhalation rates of building materials. The evaluation shows a rather good match with earlier measurements and projections as far as the average radon concentration is concerned. The trend, i.e. the development without taking measures directed at reducing the radon concentration, predicts a slow increase of about 15% until approximately the year 2025. The scenario that is directed at using concrete with low Ra-226 concentrations in new houses projects an end to this trend. Other scenarios reveal that taking measures solely in the existing housing stock would give a substantial decrease in radon concentrations in the near future. The spread sheet model that was developed to evaluate the consequences of the different scenarios projects a possible reduction of the average radon concentration in dwellings with 25% by the year 2025, compared to 1991, if measures, directed at Rn-reduction are applied. If in addition to that concrete with low Ra-226 concentrations is used in new buildings, a reduction of the average radon concentration is projected of about 30%. This would result in an average radon concentration in dwellings of about 23 Bq.m -3 in the future. These reduction percentages have to be handled with some care however, because the effect of the obviously occurring uncertainties in several parameters used, are not yet quite clear. Trends in and the

  13. Control strategies for demand controlled ventilation in dwellings

    DEFF Research Database (Denmark)

    Nielsen, Toke Rammer; Drivsholm, Christian

    2011-01-01

    and efficient fans is becoming the standard solution. The building regulation requirement for air change in dwellings is often a constant value that has been chosen to avoid moisture related problems in the indoor environment. This required air change is sometimes sufficient, sometimes too low and sometimes too....... In the studied house two control strategies were tested. A simple strategy where all sensors and controls were located in the air handling unit and only the speed of the fans can be controlled, and a complex strategy where sensors were placed in each room and where individual control of air flow in each room...

  14. Composite Monopack for 120mm Mortar, With Plastic Pallet Adapters on a 42" x 53" Wooden Pallet, MIL-STD-1660 Tests, "Design Criteria for Ammunition Unit Loads", and Extreme Temperature Tests

    National Research Council Canada - National Science Library

    Dugan, Jeffery L

    2005-01-01

    ... (AMSRD-AAR-AIL-P) to conduct MIL-STD-1660 Tests to determine if the composite monopack for the 120MM mortar, with plastic pallet adapters on a 42" x 53" wooden pallet, designed by US Army ARDEC and manufactured...

  15. Environmental constraints and call evolution in torrent-dwelling frogs.

    Science.gov (United States)

    Goutte, Sandra; Dubois, Alain; Howard, Samuel D; Marquez, Rafael; Rowley, Jodi J L; Dehling, J Maximilian; Grandcolas, Philippe; Rongchuan, Xiong; Legendre, Frédéric

    2016-04-01

    Although acoustic signals are important for communication in many taxa, signal propagation is affected by environmental properties. Strong environmental constraints should drive call evolution, favoring signals with greater transmission distance and content integrity in a given calling habitat. Yet, few empirical studies have verified this prediction, possibly due to a shortcoming in habitat characterization, which is often too broad. Here we assess the potential impact of environmental constraints on the evolution of advertisement call in four groups of torrent-dwelling frogs in the family Ranidae. We reconstruct the evolution of calling site preferences, both broadly categorized and at a finer scale, onto a phylogenetic tree for 148 species with five markers (∼3600 bp). We test models of evolution for six call traits for 79 species with regard to the reconstructed history of calling site preferences and estimate their ancestral states. We find that in spite of existing morphological constraints, vocalizations of torrent-dwelling species are most probably constrained by the acoustic specificities of torrent habitats and particularly their high level of ambient noise. We also show that a fine-scale characterization of calling sites allows a better perception of the impact of environmental constraints on call evolution. © 2016 The Author(s). Evolution © 2016 The Society for the Study of Evolution.

  16. Typology of double-tract units in multi family dwellings

    Directory of Open Access Journals (Sweden)

    Alfirević Đorđe

    2015-01-01

    Full Text Available The double-tract unit is a rather rare typological shape in residential architecture in the world, and this is why it has not been explored extensively in the field of habitology, although it is known that the first examples of double-tract units in multi- family dwellings were implemented back in XIX century. Every attempt at typology depends on the angle of analysis of a given subject, as well as the selection and hierarchy of the criteria and categorization of individual elements. This makes it hard to tell whether it is feasible to establish universal typology for all architectural patterns. Typology of residential types in architecture is mostly set according to current patterns (most often, only those that were executed. However, since the shape of double-tract unit is quite rare in the world, in most cases it was not even recorded, and even when it was, it was most often included as part of some other category or terminological definition. The aim of this paper is to outline the typology for the double-tract units in multi-family dwellings with an overview of current, established patterns (designed and executed, but also those which could yet be taken into consideration.

  17. Cave-dwelling pholcid spiders (Araneae, Pholcidae: a review

    Directory of Open Access Journals (Sweden)

    Bernhard A. Huber

    2018-06-01

    Full Text Available Pholcidae are ubiquitous spiders in tropical and subtropical caves around the globe, yet very little is known about cave-dwelling pholcids beyond what is provided in taxonomic descriptions and faunistic papers. This paper provides a review based on a literature survey and unpublished information, while pointing out potential biases and promising future projects. A total of 473 native (i.e. non-introduced species of Pholcidae have been collected in about 1000 caves. The large majority of cave-dwelling pholcids are not troglomorphic; a list of 86 troglomorphic species is provided, including 21 eyeless species and 21 species with strongly reduced eyes. Most troglomorphic pholcids are representatives of only two genera: Anopsicus Chamberlin & Ivie, 1938 and Metagonia Simon, 1893. Mexico is by far the richest country in terms of troglomorphic pholcids, followed by several islands and mainland SE Asia. The apparent dominance of Mexico may partly be due to collectors’ and taxonomists’ biases. Most caves harbor only one pholcid species, but 91 caves harbor two and more species (up to five species. Most troglomorphic pholcids belong to two subfamilies (Modisiminae, Pholcinae, very few belong to Smeringopinae and Arteminae, none to Ninetinae. This is in agreement with the recent finding that within Pholcidae, microhabitat changes in general are concentrated in Modisiminae and Pholcinae.

  18. FEAR OF FALLING AMONG COMMUNITY DWELLING OLDER ADULTS

    Directory of Open Access Journals (Sweden)

    Michaela Dingová

    2017-03-01

    Full Text Available Aim: The aim of the study was to describe experience with falls, fear of falling, perceptions of the consequences of falls and how the fear of falling affects daily life in community-dwelling older adults. Design: The study used a qualitative design to describe the lived experiences of community-dwelling older adults with the fear of falling. Methods: Semi-structured interviews were conducted individually with six participants who reported the fear of falling. Results: Five main areas emerged from data analysis: development of the fear of falling, feared consequences of falling, activities curtailment, fall prevention behavior and meaning of social support in daily life. The fear of falling was described as a negative experience, directly linked to fall consequences such as physical injury, incapacitation, loss of autonomy, fear of dependence and experience of humiliating conditions. To maintain a certain level of independence in daily life, the participants chose to avoid falls by activity curtailment, organizing their lives more carefully and getting support from others. Conclusion: All participants identified that they had discovered their fear of falling after experiencing falls. The fear of falling was associated with feared consequences of a potential fall and had an impact on their daily life. The participant also mentioned other contributors to their fear of falling, including ill health and aging. Keywords: Fear of falling, older adults, perceived consequences of falls, daily life.

  19. On the influence of the ventilation rate to the radiation burden in dwellings

    International Nuclear Information System (INIS)

    Tschurlovits, M.

    1980-01-01

    Calculations on the influence of the ventilation rate to the concentration of radon in dwellings from radioactive material of natural origin in building material are completed with a few examples of measurements. In addition, the optimization of the ventilation rate and the consequences of poorly ventilated dwellings are reported briefly. (author)

  20. Estimation of train dwell time at short stops based on track occupation event data

    NARCIS (Netherlands)

    Li, D.; Daamen, W.; Goverde, R.M.P.

    2015-01-01

    Train dwell time is one of the most unpredictable components of railway operations mainly due to the varying volumes of alighting and boarding passengers. For reliable estimations of train running times and route conflicts on main lines it is however necessary to obtain accurate estimations of dwell

  1. Dwell Notch Low Cycle Fatigue Behavior of a Powder Metallurgy Nickel Disk Alloy

    Science.gov (United States)

    Telesman, J.; Gabb, T. P.; Yamada, Y.; Ghosn, L. J.; Jayaraman, N.

    2012-01-01

    A study was conducted to determine the processes which govern dwell notch low cycle fatigue (NLCF) behavior of a powder metallurgy (P/M) ME3 disk superalloy. The emphasis was placed on the environmentally driven mechanisms which may embrittle the highly stressed notch surface regions and reduce NLCF life. In conjunction with the environmentally driven notch surface degradation processes, the visco-plastic driven mechanisms which can significantly change the notch root stresses were also considered. Dwell notch low cycle fatigue testing was performed in air and vacuum on a ME3 P/M disk alloy specimens heat treated using either a fast or a slow cooling rate from the solutioning treatment. It was shown that dwells at the minimum stress typically produced a greater life debit than the dwells applied at the maximum stress, especially for the slow cooled heat treatment. Two different environmentally driven failure mechanisms were identified as the root cause of early crack initiation in the min dwell tests. Both of these failure mechanisms produced mostly a transgranular crack initiation failure mode and yet still resulted in low NLCF fatigue lives. The lack of stress relaxation during the min dwell tests produced higher notch root stresses which caused early crack initiation and premature failure when combined with the environmentally driven surface degradation mechanisms. The importance of environmental degradation mechanisms was further highlighted by vacuum dwell NLCF tests which resulted in considerably longer NLCF lives, especially for the min dwell tests.

  2. The effect of coverplates on the dwell characteristics of silican carbide subject to KE impact

    NARCIS (Netherlands)

    Pickup, I.M.; Barker, A.K.; Elgy, I.D.; Peskes, G.J.J.M.; Voorde, M.J. van der

    2004-01-01

    The high ballistic efficiency of non-oxide ceramics such as silicon carbide against kinetic energy (KE) threats is largely due to penetrator dwell (the erosion of the tip of the rod prior to ceramic target penetration). This paper considers the effect of target surface conditions on the dwell

  3. 25 CFR 700.155 - Expenses in searching for replacement dwelling-residential move.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Expenses in searching for replacement dwelling... Expenses in searching for replacement dwelling—residential move. (a) A certified eligible head of household is entitled to actual reasonable expenses incurred in the search for a replacement dwelling. (b...

  4. Ecobuild measurement report of the infiltration measurements of the Ecobuild dwellings and the ICT dwelling; Ecobuild meetverslag infiltratiemetingen van de Ecobuild woningen en de ICT woning

    Energy Technology Data Exchange (ETDEWEB)

    Schuitema, R.; Bakker, E.J. [ECN Zonne-energie, Petten (Netherlands)

    2002-04-01

    By means of blower door measurements the airtightness of so-called Ecobuild dwellings (A, B and C) and the ICT-dwelling (D) has been determined. The airtightness is of importance with regard to calculations on heat losses and the heat balance. Data on air infiltration are important for other similar projects. [Dutch] Met blowerdeur metingen is door J.E. StorkAir de lekdichtheid van de Ecobuild woningen (woning A, B en C) en de ICT woning (woning D) bepaald.

  5. Chemical imaging techniques for the analysis of complex mixtures: New application to the characterization of ritual matters on African wooden statuettes

    International Nuclear Information System (INIS)

    Mazel, Vincent; Richardin, Pascale; Touboul, David; Brunelle, Alain; Walter, Philippe; Laprevote, Olivier

    2006-01-01

    Chemical imaging techniques, based on the combination of microscopy and spectroscopy, are well suited to study both the composition and the spatial organization of heterogeneous complex mixtures of organic and mineral matter. Time-of-flight secondary ion mass spectrometry (ToF-SIMS), followed by scanning electron microscopy with energy dispersive X-ray analysis (SEM-EDX) and Fourier transform infrared microscopy (FTIR microscopy) have been applied to non-destructive analysis of micro-samplings of ritual matters deposited on the surface of African wooden statuettes. With a very careful preparation, using ultramicrotomy on embedded samples, it was possible to perform successively all the measurements on a single fragment. Comparison and superposition of the different chemical images, obtained on a sample from a significant actual artefact, have allowed us to identify minerals (clays, quartz and calcium carbonate), proteins, starch, urate salts and lipids and to map their spatial distribution

  6. Accelerated Aging of the Traditional Greek Distillate Tsipouro Using Wooden Chips. Part I: Effect of Static Maceration vs. Ultrasonication on the Polyphenol Extraction and Antioxidant Activity

    Directory of Open Access Journals (Sweden)

    Theodora Taloumi

    2017-01-01

    Full Text Available The Greek traditional grape marc distillate Tsipouro was subjected to accelerated aging, using wooden chips from acacia, cherry, chestnut and oak wood. The processes included treatments under static maceration and ultrasonication and the evolution of the total polyphenol concentration was monitored over a period of 30 days. During this period, leaching of polyphenols from the chips into the distillate was found to obey first-order kinetics, but no statistical differences were shown between the two treatments regarding the enrichment of the liquid in polyphenolic substances. The determination of the antioxidant activity demonstrated that aging with chestnut chips may provide Tsipouro with particularly strong radical scavenging and reducing effects, highlighting its importance as a material that could be used to turn distillates into foods with functional properties.

  7. A comprehensive dwelling unit choice model accommodating psychological constructs within a search strategy for consideration set formation.

    Science.gov (United States)

    2015-12-01

    This study adopts a dwelling unit level of analysis and considers a probabilistic choice set generation approach for residential choice modeling. In doing so, we accommodate the fact that housing choices involve both characteristics of the dwelling u...

  8. Holographic Interferometry (HI), Infrared Vision and X-Ray Fluorescence (XRF) spectroscopy for the assessment of painted wooden statues: a new integrated approach

    International Nuclear Information System (INIS)

    Sfarra, Stefano; Ambrosini, Dario; Paoletti, Domenica; Ibarra-Castanedo, Clemente; Maldague, Xavier; Ridolfi, Stefano; Cerichelli, Giorgio

    2014-01-01

    Wood has been routinely employed in decorative arts, as well as in sculptures and paintings (support) during the Middle Ages, because of its unique aesthetic virtues. It may safely be assumed that wood, as a material for monumental sculpture, was much more commonly employed in the mediaeval period than existing examples would seem to indicate (Bulletin of the metropolitan Museum of Art, 2013). Wood is easily obtainable; it could be carved and put in place with less difficulty than stone, it is chemically stable when dry, and its surface offers a compatible substrate for paint application. However, the use of wood is not without pitfalls, and requires an understanding of its anisotropic and hygroscopic nature. It is also dimensionally unstable and subject to deterioration by fungi and insects. Moisture-related dimensional changes are certainly among the most challenging problems in painting conservation. With the purpose of preventing important damages, the use of non-or microdestructive testing (NDT) techniques is undoubtedly of paramount interest for painted wooden statues of great value. This work has a threefold purpose: (1) to validate the effectiveness of an integrated approach using near-infrared (NIR) reflectography, square pulse thermography (SPT), and holographic interferometry (HI) techniques for discovering old repairs and/or inclusions of foreign materials in a wooden structure, (2) to confirm and approximately date the restoration carried out by x-ray fluorescence (XRF) spectroscopy and energy-dispersive x-ray spectroscopy (EDS) (that is assembled with a scanning electron microscopy - SEM) techniques, and (3) to combine into a multidisciplinary approach two quantitative NDT results coming from optical and thermographic methods. The subject of the present study was a statue named ''Virgin with her Child'' (XIV century), whose origins are mysterious and not properly documented. (orig.)

  9. Protocol for the trismus trial-therabite versus wooden spatula in the amelioration of trismus in patients with head and neck cancer: randomised pilot study.

    Science.gov (United States)

    Lee, Rana; Molassiotis, Alex; Rogers, Simon N; Edwards, Rhiannon Tudor; Ryder, David; Slevin, Nick

    2018-03-30

    Patients can develop trismus from their head and neck cancer or as a result of treatment. Trismus affects the jaw muscles and makes mouth opening difficult. To potentially combat trismus, patients could undertake proactive jaw stretching exercises prior to, during and after radiotherapy, although currently these are not the standard of care. This is a randomised, open-label, controlled, two-centre feasibility study, to assess the objective and subjective effectiveness and cost-effectiveness of therabite use compared with wooden spatula in ameliorating trismus in patients treated for stage 3 and 4 oral and oropharyngeal cancer, managed either by primary surgery followed by (chemo)radiotherapy or primary (chemo)radiotherapy. The principal objective assessment is measurement of maximum jaw opening. Assessments in all cases will be performed preradiotherapy and again at 3 and 6 months postintervention.Secondary aims of the study will be (1) to assess whether therabite or the wooden spatula intervention improves patients' quality of life, (2) reduce the level of post-treatment clinical management/healthcare use and (3) a nested qualitative study will explore the experience of the patient taking part in the intervention; data will be transcribed verbatim and analysis will be based on content analysis methods using the interview questions as the framework for examination. North West Greater Manchester granted ethical approval (REC Reference 11/NW/0744). Good Clinical Practice and the Declaration of Helsinki have been adhered to. The results will be presented internationally and submitted to a peer-reviewed journal. Head and neck cancer charities and information websites will also be approached. NCT01733797. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  10. Holographic Interferometry (HI), Infrared Vision and X-Ray Fluorescence (XRF) spectroscopy for the assessment of painted wooden statues: a new integrated approach

    Energy Technology Data Exchange (ETDEWEB)

    Sfarra, Stefano; Ambrosini, Dario; Paoletti, Domenica [University of L' Aquila, Department of Industrial and Information Engineering and Economics, Las.E.R. Laboratory, Loc. Monteluco di Roio, AQ (Italy); Ibarra-Castanedo, Clemente; Maldague, Xavier [Laval University, Computer Vision and Systems Laboratory, Department of Electrical and Computer Engineering, Quebec City (Canada); Ridolfi, Stefano [Ars Mensurae, Rome (Italy); Cerichelli, Giorgio [University of L' Aquila, Department of Physical and Chemical Sciences, Loc. Coppito, AQ (Italy)

    2014-06-15

    Wood has been routinely employed in decorative arts, as well as in sculptures and paintings (support) during the Middle Ages, because of its unique aesthetic virtues. It may safely be assumed that wood, as a material for monumental sculpture, was much more commonly employed in the mediaeval period than existing examples would seem to indicate (Bulletin of the metropolitan Museum of Art, 2013). Wood is easily obtainable; it could be carved and put in place with less difficulty than stone, it is chemically stable when dry, and its surface offers a compatible substrate for paint application. However, the use of wood is not without pitfalls, and requires an understanding of its anisotropic and hygroscopic nature. It is also dimensionally unstable and subject to deterioration by fungi and insects. Moisture-related dimensional changes are certainly among the most challenging problems in painting conservation. With the purpose of preventing important damages, the use of non-or microdestructive testing (NDT) techniques is undoubtedly of paramount interest for painted wooden statues of great value. This work has a threefold purpose: (1) to validate the effectiveness of an integrated approach using near-infrared (NIR) reflectography, square pulse thermography (SPT), and holographic interferometry (HI) techniques for discovering old repairs and/or inclusions of foreign materials in a wooden structure, (2) to confirm and approximately date the restoration carried out by x-ray fluorescence (XRF) spectroscopy and energy-dispersive x-ray spectroscopy (EDS) (that is assembled with a scanning electron microscopy - SEM) techniques, and (3) to combine into a multidisciplinary approach two quantitative NDT results coming from optical and thermographic methods. The subject of the present study was a statue named ''Virgin with her Child'' (XIV century), whose origins are mysterious and not properly documented. (orig.)

  11. A Comparison between the Effects of Aerobic Dance Training on Mini-Trampoline and Hard Wooden Surface on Bone Resorption, Health-Related Physical Fitness, Balance, and Foot Plantar Pressure in Thai Working Women.

    Science.gov (United States)

    Sukkeaw, Wittawat; Kritpet, Thanomwong; Bunyaratavej, Narong

    2015-09-01

    To compare the effects of aerobic dance training on mini-trampoline and hard wooden surface on bone resorption, health-related physical fitness, balance, and foot plantar pressure in Thai working women. Sixty-three volunteered females aged 35-45 years old participated in the study and were divided into 3 groups: A) aerobic dance on mini-trampoline (21 females), B) aerobic dance on hard wooden surface (21 females), and C) control group (21 females). All subjects in the aerobic dance groups wore heart rate monitors during exercise. Aerobic dance worked out 3 times a week, 40 minutes a day for 12 weeks. The intensity was set at 60-80% of the maximum heart rate. The control group engaged in routine physical activity. The collected data were bone formation (N-terminal propeptine of procollagen type I: P1NP) bone resorption (Telopeptide cross linked: β-CrossLaps) health-related physical fitness, balance, and foot plantar pressure. The obtained data from pre- and post trainings were compared and analyzed by paired samples t-test and one way analysis of covariance. The significant difference was at 0.05 level. After the 12-week training, the biochemical bone markers of both mini-trampoline and hard wooden surface aerobic dance training subjects decreased in bone resorption (β-CrossLaps) but increased in boneformation (P1NP). Health-related physical fitness, balance, and foot plantar pressure were not only better when comparing to the pre-test result but also significantly different when comparing to the control group (p trampoline showed that leg muscular strength, balance and foot plantar pressure were significantly better than the aerobic dance on hard wooden surface (p trampoline and hard wooden surface had positive effects on biochemical bone markers. However, the aerobic dance on mini-trampoline had more leg muscular strength and balance including less foot plantar pressure. It is considered to be an appropriate exercise programs in working women.

  12. Dwell time-based stabilisation of switched delay systems using free-weighting matrices

    Science.gov (United States)

    Koru, Ahmet Taha; Delibaşı, Akın; Özbay, Hitay

    2018-01-01

    In this paper, we present a quasi-convex optimisation method to minimise an upper bound of the dwell time for stability of switched delay systems. Piecewise Lyapunov-Krasovskii functionals are introduced and the upper bound for the derivative of Lyapunov functionals is estimated by free-weighting matrices method to investigate non-switching stability of each candidate subsystems. Then, a sufficient condition for the dwell time is derived to guarantee the asymptotic stability of the switched delay system. Once these conditions are represented by a set of linear matrix inequalities , dwell time optimisation problem can be formulated as a standard quasi-convex optimisation problem. Numerical examples are given to illustrate the improvements over previously obtained dwell time bounds. Using the results obtained in the stability case, we present a nonlinear minimisation algorithm to synthesise the dwell time minimiser controllers. The algorithm solves the problem with successive linearisation of nonlinear conditions.

  13. Dwelling on Courtyards. Exploring the energy efficiency and comfort potential of courtyards for dwellings in the Netherlands

    Directory of Open Access Journals (Sweden)

    Mohammad Taleghani

    2014-11-01

    Full Text Available The urban heat island (UHI phenomenon and the dependency of buildings on
fossil fuels were the two main issues that formed this dissertation. UHI results in higher air temperatures in dense urban areas compared with their suburbs and rural surroundings. This phenomenon affects human health through thermal discomfort. Furthermore, in the Netherlands, it is estimated that by 2050 the air temperature could be up to 2.3°C warmer as compared to the period of 1981-2010. Besides, the energy consumption of buildings is responsible for 30 to 45% of CO2 emissions. 31% of this consumption belongs to residential buildings. Residential buildings can play a major role in reducing the CO2 emissions caused by fossil fuel consumption. One of the passive architectural design solutions is the courtyard building form. Courtyards have been used for thousands of years in different climates in the world. In hot climates they provide shading, in humid climates they cause a stack effect helping ventilation, in cold climates they break cold winds and protect their microclimate. In temperate climates (such as of the Netherlands, the thermal behaviour of courtyards has been studied less. In this dissertation, low-rise residential courtyard buildings were therefore studied among (and along different urban block types in the Netherlands. As the first step, computer simulations were done as a parametric study for indoor and outdoor thermal comfort. Field measurements were done in actual urban courtyards and in dwellings alongside urban courtyards in the Netherlands (and in a similar temperate climate in the US. A scale model experiment later followed the simulations. Some of these field measurements were used to validate the simulation models. These efforts answered the two main research questions: 1 To what extent is a dwelling alongside an urban courtyard more efficient and thermally comfortable than other dwellings? 2 To what extent do people have a more comfortable

  14. Theoretical vs. actual energy consumption of labelled dwellings in the Netherlands: Discrepancies and policy implications

    International Nuclear Information System (INIS)

    Majcen, D.; Itard, L.C.M.; Visscher, H.

    2013-01-01

    In Europe, the Energy Performance of Buildings Directive (EPBD) provides for compulsory energy performance certification (labelling) for all existing dwellings. In the Netherlands, a labelling scheme was introduced in 2008. Certificates contain the energy label of the dwelling and corresponding theoretical gas and electricity consumption, calculated based on the dwellings physical characteristics, its heating, ventilation and cooling systems and standard use characteristics. This paper reports on a large-scale study of around 200,000 dwellings comparing labels and theoretical energy use with data on actual energy use. The study shows that dwellings with a low energy label actually consume much less energy than predicted by the label, but on the other hand, energy-efficient dwellings consume more than predicted. In practice, policy targets are set according to the theoretical rather than the actual consumptions of the building stock. In line with identified discrepancies, the study shows that whereas most energy reduction targets can be met according to the theoretical energy consumption of the dwelling stock, the future actual energy reduction potential is much lower and fails to meet most of the current energy reduction targets. - Highlights: ► Actual gas consumption in Dutch dwellings is lower than the theoretical. ► In the dwellings with label A–B, theoretical gas consumption is lower than actual gas consumption. ► In less efficient dwellings, theoretical gas consumption is much higher than the actual. ► Most current energy reduction targets are unachievable if modelled with actual instead of theoretical energy consumption

  15. 25 CFR 256.15 - How long will I have to wait for repair, renovation, or replacement of my dwelling?

    Science.gov (United States)

    2010-04-01

    ... replacement of my dwelling? 256.15 Section 256.15 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR... replacement of my dwelling? The length of time that it takes to accomplish the work to be done on your dwelling is dependent on: (a) Whether funds are available; (b) The type of work to be done; (c) The climate...

  16. 24 CFR 1000.160 - Are non-dwelling structures developed, acquired or assisted under the IHBG program subject to...

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Are non-dwelling structures...-dwelling structures developed, acquired or assisted under the IHBG program subject to limitations on cost or design standards? Yes. Non-dwelling structures must be of a design, size and with features or...

  17. 24 CFR 906.5 - Dwelling units and types of assistance that a PHA may make available under a homeownership...

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Dwelling units and types of... HOUSING HOMEOWNERSHIP PROGRAMS Basic Program Requirements § 906.5 Dwelling units and types of assistance... for financing to eligible families (see § 905.15 of this title) purchasing dwelling units eligible...

  18. Wood-burning stoves in low-carbon dwellings

    DEFF Research Database (Denmark)

    Luis Teles de Carvalho, Ricardo; Jensen, Ole Michael; Afshari, Alireza

    2013-01-01

    The European climate change strategy intends to encourage the erection of low-carbon buildings and the upgrading of existing buildings to low-carbon level. At the same time, it is an EU vision to maximise the use of renewable energy resources. In this strategy, small-scale wood......-burning is an overlooked source for heating. A wood-burning stove is considered low-carbon technology since its fuel is based on local residual biomass. A field study investigating how modern wood-burning stoves operated in modern single-family houses showed that intermittent heat supply occasionally conflicted...... combustion technology and automatics, controlling the interplay between stove and house, can make wood-burning stoves suitable for low-carbon dwellings and meet the remaining heat demand during the coldest period. It was further concluded that new guidelines need to be elaborated about how to install...

  19. The joint choice of tenure, dwelling type and size

    DEFF Research Database (Denmark)

    Frenkel, Amnon; Bendit, Eduard; Kaplan, Sigal

    Real-estate market trends regarding housing preferences for tenure, dwelling type and size carry long term implications for cities’ spatial development and compactness. Much attention have been given to the impact of household demographics and socio-economic characteristics on joint housing choices...... not ignore the ordered nature of apartment size. To the best of our knowledge, first application of the MNL-OR model in the context of housing preferences. The model is applied to a data sample of 833 knowledge-workers in the Tel-Aviv metropolitan region in Israel. The effect of lifestyle on housing...... preferences is particularly interesting in the case of knowledge-workers due to their high income and car ownership which allow high residential mobility, and due to the importance they attribute to lifestyle. The data were collected by means of a revealed-preference web-based survey that elicited information...

  20. Concepts for evaluation of sound insulation of dwellings

    DEFF Research Database (Denmark)

    Rasmussen, Birgit; Rindel, Jens Holger

    2005-01-01

    Legal sound insulation requirements have existed more than 50 years in some countries, and single-number quantities for evaluation of sound insulation have existed nearly as long time. However, the concepts have changed considerably over time from simple arithmetic averaging of frequency bands......¬ments and classification schemes revealed significant differences of concepts. The paper summarizes the history of concepts, the disadvantages of the present chaos and the benefits of consensus concerning concepts for airborne and impact sound insulation between dwellings and airborne sound insulation of facades...... with a trend towards light-weight constructions are contradictory and challenging. This calls for exchange of data and experience, implying a need for harmonized concepts, including use of spectrum adaptation terms. The paper will provide input for future discussions in EAA TC-RBA WG4: "Sound insulation...

  1. The relationship between sound insulation and acoustic quality in dwellings

    DEFF Research Database (Denmark)

    Rindel, Jens Holger

    1998-01-01

    to another, however, several of the results show a slope around 4 % per dB. The results may be used to evaluate the acoustic quality level of a certain set of sound insulation requirements, or they may be used as a basis for specifying the desired acoustic quality of future buildings.......During the years there have been several large field investigations in different countries with the aim to find a relationship between sound insulation between dwellings and the subjective degree of annoyance. This paper presents an overview of the results, and the difficulties in comparing...... the different findings are discussed. It is tried to establish dose-response relationships between airborne sound insulation or impact sound pressure level according to ISO 717 and the percentage of people being annoyed by noise from neighbours. The slopes of the dose-response curves vary from one investigation...

  2. Factors associated with cane use among community dwelling older adults.

    Science.gov (United States)

    Aminzadeh, F; Edwards, N

    2000-01-01

    Guided by the Theory of Planned Behavior (TPB), this study examined factors associated with cane use among community dwelling older adults. Data were collected in a cross-sectional survey of a convenience sample of 106 community residing older adults in Ottawa, Canada. Using a stepwise discriminant analysis, subjective norms, attitudes, and age surfaced as the key variables associated with cane use in this sample. The discriminant function accounted for 67% of the variance in cane use and correctly classified 91% of cases (Wilks's lambda = 0.33, lambda2 = 110.12, df = 3, p cane use behaviors of older persons and have important implications for the design of theory-based fall prevention interventions to enhance the acceptance and effective use of mobility aids.

  3. Gachin dwellings on a hot area, but with normal background

    International Nuclear Information System (INIS)

    Bahreyni Toosi, M.; Hagh Parast, M.

    2006-01-01

    Full text of publication follows: General population, everywhere in the world is exposed to a small dose of ionizing radiation from natural sources. Stochastic effects such as cancer and genetic disorders are caused when living creatures are exposed to low doses. In many countries, intensive studies have been carried out to establish natural back ground radiation in general, and also its significant components such as indoor and out door gamma radiation as well as radon contribution. Until 1996 sporadic studies had been carried out in Iran to assess background radiation in some area susceptible to high levels of radiation. Since 1996 M. T. Bahreyni Toossi and co-workers have measured environmental gamma radiation out- door and in-door for a vast area covering several provinces to establish the environmental gamma radiation level map of Iran. So far, Khorasan, Mazandaran, Kurdestan, Kerman and Bushehr counties have been investigated. In our latest project of these kind two counties, Sistan Baluchestan and Hormozgan in the south and south east Iran were studied. Gachin, a village located in south west Bandar Abbass had already been recognized as a high level natural back ground radiation with possible deposit of uranium. Therefore particular attention was paid to this village with some 3000 populations. Out door environmental radiation were measured for all 16 towns. In each town 5 stations were selected similar to those in previous studies i.e. one station at the town center and four station at the marginal area of the town along the four main geographical directions, i.e: north, south, east and west. Dose rates were measured over one minute interval for one hour. Mean of 60 individual measurements were taken as average dose rate for the selected station. In order to assess additional risk to Gachin inhabitants, in -door measurements were carried out inside 115 dwelling selected randomly. To measure environmental gamma radiation an environmental radiation meter type

  4. Indoor radon survey in dwellings of some regions in Yemen

    Energy Technology Data Exchange (ETDEWEB)

    Khayrat, A.H. E-mail: akhayrat@yahoo.com; Al-Jarallah, M.I.; Fazal-ur-Rehman, X.; Abu-Jarad, F

    2003-06-01

    Indoor radon survey in a total of 241 dwellings, distributed in some regions of Yemen was performed, using CR-39 based radon monitors. The objective of this radon survey is to get representative indoor radon data of three regions, namely Dhamar, Taiz and Hodeidah, situated at different altitudes above sea level. The radon concentrations varied from 3 to 270 Bq m{sup -3} with an average of 42 Bq m{sup -3}. It was found that the average radon concentration in the surveyed areas increases with altitudes. The highest average radon concentration of 59 Bq m{sup -3} was found in Dhamar city while the lowest average concentration of 8 Bq m{sup -3} was found in Hodeidah city.

  5. Indoor radon measurements in dwellings of four Saudi Arabian cities

    Energy Technology Data Exchange (ETDEWEB)

    Al-Jarallah, M.I. E-mail: mibrahim@kfupm.edu.sa; Fazal-ur-Rehman; Abu-Jarad, F.; Al-Shukri, A

    2003-06-01

    An indoor radon survey of a total of 269 dwellings, with one dosimeter per house, distributed in four Saudi Arabian cities was carried out. The objective of this survey was to carry out indoor radon measurements of two cities in the Eastern Province, Khafji and Hafr Al-Batin and to compare this with two cities in the Western Province, Al-Madina and Taif. The survey provides additional information about indoor radon concentrations in Saudi Arabia. The results of the survey in these cities showed that the overall minimum, maximum and average radon concentration were 7,137 and 30 Bq m{sup -3}, respectively. The lowest average radon concentration (20 Bq m{sup -3}) was found in Hafr Al-Batin, while the highest average concentration was found in Khafji (40 Bq m{sup -3})

  6. Indoor radon measurements in dwellings of Garhwal Himalaya, Northern India

    International Nuclear Information System (INIS)

    Ramola, R.C.

    1996-01-01

    Measurement of indoor radon and daughters concentration were performed in several houses in Garhwal Himalaya during 1993-95 with solid state nuclear track detector films (LR-115 Type II). The detector films were exposed for a period of three month to one year. The films basically measured total airborne alpha activity but may be calibrated in unite of EEC RN (equilibrium equivalent concentration of radon with equilibrium factor F=0.45) in an environment with known radon and daughters concentrations. A numbers of dwelling in the area exhibited radon daughters concentrations (EEC RN ) exceeding the recommended level. The abnormal values are due to typical house construction (mud house) in the area. The houses are constructed with soil and local stone with a thin paste of mud. Behaviour and abnormality of radon in mud houses are discussed in details the corresponding annual effective dose has been calculated. (author)

  7. Gachin dwellings on a hot area, but with normal background

    Energy Technology Data Exchange (ETDEWEB)

    Bahreyni Toosi, M.; Hagh Parast, M. [Mashhad Univ. of Medical Sciences, Medical Physics Dep., Faculty of Medicine (Iran, Islamic Republic of)

    2006-07-01

    Full text of publication follows: General population, everywhere in the world is exposed to a small dose of ionizing radiation from natural sources. Stochastic effects such as cancer and genetic disorders are caused when living creatures are exposed to low doses. In many countries, intensive studies have been carried out to establish natural back ground radiation in general, and also its significant components such as indoor and out door gamma radiation as well as radon contribution. Until 1996 sporadic studies had been carried out in Iran to assess background radiation in some area susceptible to high levels of radiation. Since 1996 M. T. Bahreyni Toossi and co-workers have measured environmental gamma radiation out- door and in-door for a vast area covering several provinces to establish the environmental gamma radiation level map of Iran. So far, Khorasan, Mazandaran, Kurdestan, Kerman and Bushehr counties have been investigated. In our latest project of these kind two counties, Sistan Baluchestan and Hormozgan in the south and south east Iran were studied. Gachin, a village located in south west Bandar Abbass had already been recognized as a high level natural back ground radiation with possible deposit of uranium. Therefore particular attention was paid to this village with some 3000 populations. Out door environmental radiation were measured for all 16 towns. In each town 5 stations were selected similar to those in previous studies i.e. one station at the town center and four station at the marginal area of the town along the four main geographical directions, i.e: north, south, east and west. Dose rates were measured over one minute interval for one hour. Mean of 60 individual measurements were taken as average dose rate for the selected station. In order to assess additional risk to Gachin inhabitants, in -door measurements were carried out inside 115 dwelling selected randomly. To measure environmental gamma radiation an environmental radiation meter type

  8. Dwelling habitus and urban out-migration in Denmark

    DEFF Research Database (Denmark)

    Aner, Louise G.

    2016-01-01

    This paper examines young Danish families’ motives for leaving the city. By drawing on theories of Bourdieu and Giddens and combining them with a notion of place drawn from human geography, an analytical framework for studying people’s motives for moving is developed. In this framework the concept...... is based on changes in housing needs during family formation and on the limited opportunities in the Copenhagen housing market. The anti-urban motive is based on a wish to bring up children in a non-urban milieu. The paper argues that an understanding of motives that focuses on the interrelationship...... “dwelling habitus” is central. By applying the analytical framework to the study of Danish middle-income families with children, their motives for out-migrating from Copenhagen are explored. Two broad categories of motives for moving are identified: the housing and the anti-urban. The housing motive...

  9. Radon concentration in dwellings of Lanzarote (Canary Islands)

    Energy Technology Data Exchange (ETDEWEB)

    Pinza, C.; Armas, J.H. [La Laguna Univ., Tenerife (Spain). Faculty of Medicine; Poffijn, A. [Ghent Rijksuniversiteit (Belgium). Lab. voor Kernfysica

    1997-07-01

    A total of 126 radon passive dosemeters were distributed in 63 dwellings on the island of Lanzarote (Canary Islands) to measure the indoor radon concentration in the period April-June 1994. The mean overall indoor concentration was 50 Bq.m{sup -3} with a standard deviation of 17 Bq.m{sup -3}. Applying the conversion factor for the effective dose, recommended by ICRP 65, this results in a mean effective dose of 0.75 mSv.y{sup -1}. The mean radon concentration in single-family houses proves to be higher at the ground floor than in upper levels. The mean radon concentration obtained in bedrooms is higher than in living-rooms, independently of the floor they are located at. Statistically significant differences in the mean radon concentration have been found depending on the soil permeability (P = 0.001) and building materials used (P 0.0006). (author).

  10. Radon concentration in dwellings of Lanzarote (Canary Islands)

    International Nuclear Information System (INIS)

    Pinza, C.; Armas, J.H.; Poffijn, A.

    1997-01-01

    A total of 126 radon passive dosemeters were distributed in 63 dwellings on the island of Lanzarote (Canary Islands) to measure the indoor radon concentration in the period April-June 1994. The mean overall indoor concentration was 50 Bq.m -3 with a standard deviation of 17 Bq.m -3 . Applying the conversion factor for the effective dose, recommended by ICRP 65, this results in a mean effective dose of 0.75 mSv.y -1 . The mean radon concentration in single-family houses proves to be higher at the ground floor than in upper levels. The mean radon concentration obtained in bedrooms is higher than in living-rooms, independently of the floor they are located at. Statistically significant differences in the mean radon concentration have been found depending on the soil permeability (P = 0.001) and building materials used (P 0.0006). (author)

  11. Heating energy flexibility of dwellings. Asuinrakennusten laemmityksen energiajoustavuus

    Energy Technology Data Exchange (ETDEWEB)

    Haapalahti, P [Valtion Teknillinen Tutkimuskeskus, Espoo (Finland). Yhdyskunta- ja rakennussuojelun Lab

    1989-02-01

    The problem area under study concens the heating of dwellings fluctuations in energy supply. The research has been restricted to dwellings only and those activities linked to energy production and transportation have been excluded. During energy shortage, home-owners are faced with two alternatives: to cut down their energy consumption or to use other forms of energy as substitutes for primary energy. In the case of a serious crisis regarding domestic fuel, wood in particular can be considered as a viable alternative. However, when considering present-day installations, any increase in use of wood as a fuel must be seen as limited. Thus the saving of energy in times of shortage is rendered still more important. Energy-savings is, of course, possible in terms of reduced comfort and quality factors in comparison to those preveiling under normal circumstances. For example, indoor temperatures can be lowered, ventilation diminished or the consumption of warm water deccreased. With respect to saving activities, the adjustability of heating and ventilation should be as efficient as possible. With regard to altering situations regarding energy prices, energy flexibility means, primarily, changing energy sources. Replacing an energy source is, however, a quite an expensive operation and economic dependence on the chosen system is considerable.Energy flexibility, particularly in the choice of main heating system, is easiest to achieve during new building phases and can be improved by recourse to various main solutions such as, for instance, the construction of fireplace. Mechanical incoming and exhaust air system can be chosen for direct electrical heating for a ventilation system. The control of the indoor temperature and ventilation of each separate room can be developed in all heating systems.

  12. Psychological effects of exercise on community-dwelling older adults

    Directory of Open Access Journals (Sweden)

    Tada A

    2018-02-01

    Full Text Available Akio Tada Faculty of Health Science, Hyogo University, Kakogawa, Hyogo, Japan Background: In recent years, there have been an increasing number of older adults who suffer from mental disorders globally.Objective: The objective of this study was to examine the effect of an intervention that consisted of an exercise program to improve the mental health of community-dwelling older adults.Participants and methods: The recruited participants of this study were community-dwelling older adults aged ≥60 years who participated in a comprehensive health promotion program in Kakogawa, Japan. Participants in the intervention group received an exercise program that was developed for older adults using Thera-Band. To measure participants’ mental health status, a Japanese version of the short form of the Profile of Mood States (POMS-SF was used. Stress markers were measured, such as salivary cortisol, alpha-amylase, and sIgA levels. All participants provided salivary samples and completed psychological questionnaires at baseline and 6-month follow-up.Results: No significant differences were observed between the intervention and control groups with respect to POMS-SF score and salivary biomarker profile at baseline. After the intervention, the intervention group showed a significant decrease in the POMS-SF “fatigue” score and cortisol level. No significant changes were observed in the control group.Conclusion: Simultaneous changes in feelings of fatigue and cortisol levels were observed among subjects who had received the intervention of regular exercise. Further research is needed to investigate the effectiveness of exercise intervention in improving mental health among older adults. Keywords: intervention, exercise, psychological status, stress, cortisol

  13. Role of environmental hazards in fall of community dwelling elderly

    International Nuclear Information System (INIS)

    Shabbir, M.; Shah, S.I.H.

    2013-01-01

    Evidence linking home hazards to falls has not been well established. Falls and fall injury are a major public health concern for the elderly. Fall of elderly is very much affected by environmental hazards. Falls are a major cause of morbidity and mortality in persons older than 60. There is a greater-than-linear increase in the rate of falls with environmental hazards. This cross section survey will not only lay the foundation for further study on this topic but also provide the basis for the development of preventive program of falls for the elders of Pakistan. Objective: To explore the role of environmental hazards of fall in the community dwelling elders is the area which is lacking in research. Methods: This cross sectional study was conducted from October to December 2010 in Lahore and its peripheries and also the patients in hospital settings come after fractures or fall injuries. The total number of people included was 100. Community dwelling Elders above 60 years having recent history of at least one fall were included regardless of gender. The data were entered and analyzed using SPSS 11.5. Results: There were 71 people out of 100 who fell inside the home, 10 fell outside the home and 18 were not applicable to this question. There were 19% people, who fell repeatedly at one place, 31 people replied about hazard environment where fallen that contribute to fall. According to 24 people they had Safety checks of their home yard and/ or neighborhood which will assist to avoid future fall. Conclusion: Most elderly persons live in a risky home setting. It is vital that environmental hazard be recognized and removed for wellbeing of elderly. (author)

  14. Impacts of Rotation Schemes on Ground-Dwelling Beneficial Arthropods.

    Science.gov (United States)

    Dunbar, Mike W; Gassmann, Aaron J; O'Neal, Matthew E

    2016-10-01

    Crop rotation alters agroecosystem diversity temporally, and increasing the number of crops in rotation schemes can increase crop yields and reduce reliance on pesticides. We hypothesized that increasing the number of crops in annual rotation schemes would positively affect ground-dwelling beneficial arthropod communities. During 2012 and 2013, pitfall traps were used to measure activity-density and diversity of ground-dwelling communities within three previously established, long-term crop rotation studies located in Wisconsin and Illinois. Rotation schemes sampled included continuous corn, a 2-yr annual rotation of corn and soybean, and a 3-yr annual rotation of corn, soybean, and wheat. Insects captured were identified to family, and non-insect arthropods were identified to class, order, or family, depending upon the taxa. Beneficial arthropods captured included natural enemies, granivores, and detritivores. The beneficial community from continuous corn plots was significantly more diverse compared with the community in the 2-yr rotation, whereas the community in the 3-yr rotation did not differ from either rotation scheme. The activity-density of the total community and any individual taxa did not differ among rotation schemes in either corn or soybean. Crop species within all three rotation schemes were annual crops, and are associated with agricultural practices that make infield habitat subject to anthropogenic disturbances and temporally unstable. Habitat instability and disturbance can limit the effectiveness and retention of beneficial arthropods, including natural enemies, granivores, and detritivores. Increasing non-crop and perennial species within landscapes in conjunction with more diverse rotation schemes may increase the effect of biological control of pests by natural enemies. © The Authors 2016. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  15. Social and Spatial Networks: Kinship Distance and Dwelling Unit Proximity in Rural Thailand

    Science.gov (United States)

    Verdery, Ashton M.; Entwisle, Barbara; Faust, Katherine; Rindfuss, Ronald R.

    2013-01-01

    We address a long hypothesized relationship between the proximity of individuals' dwelling units and their kinship association. Better understanding this relationship is important because of its implications for contact and association among members of a society. In this paper, we use a unique dataset from Nang Rong, Thailand which contains dwelling unit locations (GPS) and saturated kinship networks of all individuals living in 51 agricultural villages. After presenting arguments for a relationship between individuals’ dwelling unit locations and their kinship relations as well as the particulars of our case study, we introduce the data and describe our analytic approach. We analyze how kinship - considered as both a system linking collections of individuals in an extended kinship network and as dyadic links between pairs of individuals -patterns the proximity of dwelling units in rural villages. The results show that in general, extended kin live closer to one another than do unrelated individuals. Further, the degree of relatedness between kin correlates with the distance between their dwelling units. Close kin are more likely to co-reside, a fact which drives much of the relationship between kinship relatedness and dwelling unit proximity within villages. There is nevertheless suggestive evidence of a relationship between kinship association and dwelling unit proximity among kin who do not live together. PMID:23956489

  16. Dwell time modulation restrictions do not necessarily improve treatment plan quality for prostate HDR brachytherapy

    International Nuclear Information System (INIS)

    Balvert, Marleen; Gorissen, Bram L; Den Hertog, Dick; Hoffmann, Aswin L

    2015-01-01

    Inverse planning algorithms for dwell time optimisation in interstitial high-dose-rate (HDR) brachytherapy may produce solutions with large dwell time variations within catheters, which may result in undesirable selective high-dose subvolumes. Extending the dwell time optimisation model with a dwell time modulation restriction (DTMR) that limits dwell time differences between neighboring dwell positions has been suggested to eliminate this problem. DTMRs may additionally reduce the sensitivity for uncertainties in dwell positions that inevitably result from catheter reconstruction errors and afterloader source positioning inaccuracies. This study quantifies the reduction of high-dose subvolumes and the robustness against these uncertainties by applying a DTMR to template-based prostate HDR brachytherapy implants. Three different DTMRs were consecutively applied to a linear dose-based penalty model (LD) and a dose-volume based model (LDV), both obtained from literature. The models were solved with DTMR levels ranging from no restriction to uniform dwell times within catheters in discrete steps. Uncertainties were simulated on clinical cases using in-house developed software, and dose-volume metrics were calculated in each simulation. For the assessment of high-dose subvolumes, the dose homogeneity index (DHI) and the contiguous dose volume histogram were analysed. Robustness was measured by the improvement of the lowest D 90% of the planning target volume (PTV) observed in the simulations. For (LD), a DTMR yields an increase in DHI of approximately 30% and reduces the size of the largest high-dose volume by 2–5 cc. However, this comes at a cost of a reduction in D 90% of the PTV of 10%, which often implies that it drops below the desired minimum of 100%. For (LDV), none of the DTMRs were able to improve high-dose volume measures. DTMRs were not capable of improving robustness of PTV D 90% against uncertainty in dwell positions for both models. (paper)

  17. The revival of the traditional Bosnian wood dwellings

    Energy Technology Data Exchange (ETDEWEB)

    Korjenic, A. [Institute for Building Construction and Technology, Research Centre of Building Physics and Sound Protection, Vienna University of Technology, Karlsplatz 13/206-2, 1040 Vienna (Austria); Klaric, S. [Faculty of Architecture Sarajevo, University of Sarajevo, Grbavicka 84, 71000 Sarajevo (Bosnia and Herzegovina)

    2011-11-15

    This paper presents the results of research regarding the possibilities of the revival of the traditional Bosnian single-family house. The architectural design, spatial organization, and connection with the natural environment make it a valuable example of residential architecture. The use of local natural materials such as wood, stone, and adobe brick, brings this typology back into the limelight. This study illustrates that due to the increasing need to save energy, the importance to use natural materials, and integration of sustainable design into architectural design processes, our contemporaries turn to past examples in order to reference benchmarks combined with cutting edge technology for buildings of the future. Because Bosnia has large wooded areas, and a policy goal is to use local resources, the research aim was to establish if modern prefabricated wooden houses can reproduce traditional Bosnian architecture while meeting the highest energy efficiency requirements. Many Bosnians fear that traditional Bosnian architecture will be lost due to new construction, therefore there is opposition against the harmonization of standards. The solutions for redesigning traditional Bosnian single-family homes to meet energy efficiency requirements were obtained using the BuildOpt{sub V}IE dynamic thermal simulation software. It was used to find optimal solutions in building physics, along with several variations to be applied during construction of new buildings and reconstruction of existing buildings. This research sets a foundation for further developments in contemporary individual residences, optimized according to recent building physics standards. The purpose of this paper is inter alia to show that nothing stands in the way to harmonize technical guidelines and regulations in the field of energy-efficient buildings in Bosnia and Herzegovina (B and H), and the adaption of existing norms. Despite the EU requirements as mandated in the Energy Performance of

  18. A study of urbanization and regional characteristics of dwellings with a view to protection calculations

    International Nuclear Information System (INIS)

    Davin, F.; Mauvigner, V.; Porte, E.; Vergnes, B.; Garnier, A.

    1985-08-01

    The purpose of the study was to collect the data necessary to the development of calculation methods in order to assess the protection against irradiation presented by dwellings in case of accident. The main points investigated were: the stock of dwellings in France together with a general review of European dwellings, and its utilization; individual houses both industrial and conventional; modern and old apartment houses; the elements of the various construction types (walls, floor, roof, apertures..): ventilation standards; masonry materials. Various parameters were collected in order to assess the doses likely to be delivered to the inhabitants [fr

  19. Energy statistics for one- and two-dwelling buildings in 2008; Energistatistik foer smaahus 2008

    Energy Technology Data Exchange (ETDEWEB)

    2009-09-15

    The survey of energy statistics in 2008 on one- and two-dwelling buildings, including agricultural one- and two-dwelling buildings, is based on a sample of 6 852 buildings. The survey was carried out as a mail survey in June 2008. The non-response rate was 39 percent. The presentation provides data on energy use, number of one- and two-dwelling buildings, and heated floor areas for the total population and for various subdivisions. During the last two years the number one- and two-dwelling buildings heated solely by district heating has greatly increased. The total use of district heating has increased by 32 percent. The use of oil for hot water and heating of one- and two dwelling buildings has decreased by 21 percent compared to 2007, and by 75 percent during the last five-year period. Nearly 40 percent of one- and two-dwelling buildings are heated completely or partially with a heat pump. However, the sharp increase in the number of heat pumps during the last five-year period has nearly come to a standstill in the last two years. About 42 percent of all one- and two-dwelling buildings in Sweden are heated by electricity as the only source of heat, including houses that are heated by heat pumps. Combined heating with electricity and biomass fuel is the second most common heating method, followed by heating with solely biomass fuel. 17 100 kWh electricity per household in one- and two-dwelling buildings heated by direct electricity exclusively and 18 800 kWh in one- and two dwelling buildings heated by water-borne electricity exclusively or 130 kWh per square metre of heated surface area (incl. electricity for household purposes). 2.5 cubic metres of oil per household in one- and two-dwelling buildings heated by oil exclusively or 18.7 litres of oil per square metre of heated surface area. 12.7 TWh electricity for households in one- and two-dwelling buildings, including the electricity used in combinations with other types of heating, but excluding electricity for

  20. Using Variable Dwell Time to Accelerate Gaze-based Web Browsing with Two-step Selection

    OpenAIRE

    Chen, Zhaokang; Shi, Bertram E.

    2017-01-01

    In order to avoid the "Midas Touch" problem, gaze-based interfaces for selection often introduce a dwell time: a fixed amount of time the user must fixate upon an object before it is selected. Past interfaces have used a uniform dwell time across all objects. Here, we propose an algorithm for adjusting the dwell times of different objects based on the inferred probability that the user intends to select them. In particular, we introduce a probabilistic model of natural gaze behavior while sur...

  1. Exposure to radon in dwellings below the ground level in the area of Zagreb

    International Nuclear Information System (INIS)

    Lokobauer, N.; Franic, Z.; Sokolovic, E.; Petroci, L.; Sencar, J.; Lokner, V.

    1998-01-01

    Radon measurements were carried out in 44 dwellings at 22 locations in the area of Zagreb with the aim of establishing possible differences in radon levels between dwellings located below ground level, and those on higher floors. The measurements were performed using a Honeywell professional radon monitor both during the spring/summer and the autumn/winter seasons. Significant differences were found: for dwellings below ground level, the average annual radon activity concentration was 57±20 Bqm -3 ; for those on higher floors the value was 35±15 Bqm -3 . (A.K.)

  2. Energy statistics for one- and two-dwelling buildings in 2007; Energistatistik foer smaahus 2007

    Energy Technology Data Exchange (ETDEWEB)

    2009-01-15

    The survey of energy statistics in 2007 on one- and two-dwelling buildings, including agricultural one- and two-dwelling buildings, is based on a sample of 6,849 buildings. The survey was carried out as a mail survey in June 2007. The non-response rate was 37 percent. The presentation provides data on energy use, number of one- and two-dwelling buildings, and heated floor areas for the total population and for various subdivisions. The use of oil for hot water and heating of one- and two-dwelling buildings has decreased by 23 percent compared to 2006, and by 71 percent the last 5 years. The number of air heat pumps increased by 41 per cent compared to 2006 and the total number of heat pumps increased from over 500 000 to over 650 000. More than 45 percent of the one- and two-dwelling buildings are heated by electricity exclusively, including buildings heated by air heat pump. About 20 percent are heated by a combination of bio fuel and electricity and about 3 percent are heated by oil exclusively. 17,200 kWh electricity per household in one- and two-dwelling buildings heated by direct electricity exclusively and 20,300 kWh in one- and two-dwelling buildings heated by water-borne electricity exclusively or 132 kWh per square metre of heated surface area (incl. electricity for household purposes). 2.8 cubic metres of oil per household in one- and two-dwelling buildings heated by oil exclusively or 19.9 litres of oil per square metre of heated surface area. 13.5 TWh electricity for households in one- and two-dwelling buildings, including the electricity used in combinations with other types of heating, but excluding electricity for household purposes which is estimated to 10,4 TWh. 258,000 cubic metres of oil (about 2.6 TWh) for households in one- and two-dwelling buildings. This includes mixed heating. 6.6 millions cubic metres of firewood in one- and two-dwelling buildings, 975,000 cubic metres of wood chips and 461,000 tons of pellets. This amount corresponds to 11

  3. Stoichiometry of excreta and excretion rates of a stream-dwelling plethodontid salamander

    Data.gov (United States)

    U.S. Environmental Protection Agency — Stoichiometry of excreta and excretion rates of a stream-dwelling plethodontid salamander in Cincinnati, OH, USA. This dataset is associated with the following...

  4. Ventilation- and infiltration measurements in a dwelling in view of the problems with radon

    International Nuclear Information System (INIS)

    Gids, W.F. de; Phaff, J.C.

    1986-06-01

    This report describes the results of continuous ventilation measurements, with N 2 O as tracer gas, of infiltration streams in seven spaces in a dwelling. The results are compared with ventilation model calculations; good agreement was obtained. (Auth.)

  5. Tube-dwelling invertebrates: tiny ecosystem engineers have large effects in lake ecosystems

    NARCIS (Netherlands)

    Hölker, Franz; Vanni, Michael J.; Kuiper, Jan J.; Meile, Christof; Grossart, Hans-Peter; Stief, Peter; Adrian, Rita; Lorke, Andreas; Dellwig, Olaf; Brand, Andreas; Hupfer, Michael; Mooij, Wolf M.; Nützmann, Gunnar; Lewandowski, Jörg

    2015-01-01

    There is ample evidence that tube-dwelling invertebrates such as chironomids significantly alter multiple important ecosystem functions, particularly in shallow lakes. Chironomids pump large water volumes, and associated suspended and dissolved substances, through the sediment and thereby compete

  6. Soft sediment dwelling macro-invertebrates of Rajapur Bay, central west coast of India

    Digital Repository Service at National Institute of Oceanography (India)

    Harkantra, S.N.; Parulekar, A.H.

    Thirtyfour species of soft sediment dwelling macro-invertebrates were recorded in Rajapur Bay at the proposed effluent discharge location of nuclear power plant. The fauna mainly composed of polychaetes (42.52%), molluscs (39.03%), crustaceans (7...

  7. The Application of Downdraught Cooling in Vernacular Skywell Dwellings in China

    Science.gov (United States)

    Xuan, H.; Lv, A. M.

    2017-05-01

    Traditional skywell dwellings in the hot climate regions of China represent an important cultural heritage. Achieving indoor comfort meeting occupants’ expectations, can contribute to the preservation of this unique traditional architecture. Improvement of ventilation and indoor temperatures through natural, sustainable and low impact solutions is an opportunity in achieving building thermal comfort in these traditional dwellings. The existence of skywells provides a good opportunity for the incorporation of downdraught cooling with minor interventions, and thus by avoiding extensive ductwork, saving energy and improving indoor temperatures, it can contribute to the preservation of traditional dwellings. Applicability of downdraught cooling, the history of traditional ventilation solutions, layout and space features of skywell dwelling are discussed and the way of incorporating downdraught cooling as an alternative to air-conditioning into these buildings is investigated.

  8. A Fuzzy Logic-Based Approach for Estimation of Dwelling Times of Panama Metro Stations

    Directory of Open Access Journals (Sweden)

    Aranzazu Berbey Alvarez

    2015-04-01

    Full Text Available Passenger flow modeling and station dwelling time estimation are significant elements for railway mass transit planning, but system operators usually have limited information to model the passenger flow. In this paper, an artificial-intelligence technique known as fuzzy logic is applied for the estimation of the elements of the origin-destination matrix and the dwelling time of stations in a railway transport system. The fuzzy inference engine used in the algorithm is based in the principle of maximum entropy. The approach considers passengers’ preferences to assign a level of congestion in each car of the train in function of the properties of the station platforms. This approach is implemented to estimate the passenger flow and dwelling times of the recently opened Line 1 of the Panama Metro. The dwelling times obtained from the simulation are compared to real measurements to validate the approach.

  9. Interdependence of environmental parameters and sand dwelling benthic species abundance: a multivariate approach

    Digital Repository Service at National Institute of Oceanography (India)

    Harkantra, S.N.; Parulekar, A.H.

    Multivariate analysis showed dependence of distribution and abundance of sand dwelling fauna on more than one ecologically significant environmental parameters rather than one ecological master factor. Salinity, grain size, beach gradient, dissolved...

  10. Survey of occupant behaviour and control of indoor environment in Danish dwellings

    DEFF Research Database (Denmark)

    Andersen, Rune Vinther; Toftum, Jørn; Andersen, Klaus Kaae

    2009-01-01

    separately by means of multiple logistic regression in order to quantify factors influencing occupants’ behaviour. The window opening behaviour was strongly related to the outdoor temperature. The perception of the environment and factors concerning the dwelling also impacted the window opening behaviour......Repeated surveys of occupant control of the indoor environment were carried out in Danish dwellings from September to October 2006 and again from February to March 2007. The summer survey comprised 933 respondents and the winter survey 636 respondents. The surveys were carried out by sending out....... The proportion of dwellings with the heating turned on was strongly related to the outdoor temperature and the presence of a wood burning stove. The solar radiation, dwelling ownership conditions and the perception of the indoor environment also affected the use of heating. The results of the statistical...

  11. GPM GROUND VALIDATION NOAA S-BAND PROFILER ORIGINAL DWELL DATA MC3E V1

    Data.gov (United States)

    National Aeronautics and Space Administration — The S-band Profiler Original Dwell dataset in the netCDF format was gathered during the Midlatitude Continental Convective Clouds Experiment (MC3E) in Oklahoma...

  12. ASSOCIATIONS BETWEEN GENETIC DIVERSITY AND ANTHROPOGENIC DISTURBANCE IN MIDWESTERN STREAM-DWELLING MINNOWS

    Science.gov (United States)

    Anthropogenic disturbances may leave imprints on patterns of intraspecific genetic diversity through their effects on population size, adaptation, migration, and mutation. We examined patterns of genetic diversity for a stream-dwelling minnow (the central stoneroller, Campostoma...

  13. Dwell time dependent morphological transition and sputtering yield of ion sputtered Sn

    International Nuclear Information System (INIS)

    Qian, H X; Zeng, X R; Zhou, W

    2010-01-01

    Self-organized nano-scale patterns may appear on a wide variety of materials irradiated with an ion beam. Good manipulation of these structures is important for application in nanostructure fabrication. In this paper, dwell time has been demonstrated to be able to control the ripple formation and sputtering yield on Sn surface. Ripples with a wavelength of 1.7 μm were observed for a dwell time in the range 3-20 μs, whereas much finer ripples with a wavelength of 540 nm and a different orientation were observed for a shorter dwell time in the range 0.1-2 μs. The sputtering yield increases with dwell time significantly. The results provide a new basis for further steps in the theoretical description of morphology evolution during ion beam sputtering.

  14. Adaptive thermal comfort opportunities for dwellings: Providing thermal comfort only when and where needed in dwellings in the Netherlands

    Directory of Open Access Journals (Sweden)

    Noortje Alders

    2016-08-01

    Full Text Available The aim of the research presented in this thesis is to design the characteristics of an Adaptive Thermal Comfort System for Dwellings to achieve a significantly better energy performance whilst not compromising the thermal comfort perception of the occupants. An Adaptive Thermal Comfort System is defined as the whole of passive and active comfort components of the dwelling that dynamically adapts its settings to varying user comfort demands and weather conditions (seasonal, diurnal and hourly depending on the aspects adapted, thus providing comfort only where, when and at the level needed by the user, to improve possibilities of harvesting the environmental energy (e.g. solar gain and outdoor air when available and storing it when abundant. In order to be able to create an Adaptive Thermal Comfort System to save energy knowledge is needed as to where, when, what kind and how much energy is needed to provide the thermal comfort. Therefore, this research aimed to gain insight in the dynamic behaviour of the weather and the occupant and the opportunities to design the characteristics of an Adaptive Thermal Comfort System for Dwellings to achieve a significantly better energy performance whilst not compromising the thermal comfort perception of the occupants answering the main research question;  What are the most efficient strategies for delivering thermal comfort in the residential sector with respect to better energy performances and an increasing demand for flexibility in use and comfort conditions? To answer the main research question three steps were taken, which also represent the three parts of the research: 1. The dynamic information of the factors influencing the thermal heat balance of the dwelling was gathered in order to determine their opportunities for adaptivity. A multidisciplinary approach to Thermal Comfort Systems is followed taking into account the dynamic of occupancy profiles, weather, building physics, HVAC and controls. A

  15. The effect of proximity to major roads on indoor air quality in typical Australian dwellings

    Science.gov (United States)

    Lawson, Sarah J.; Galbally, Ian E.; Powell, Jennifer C.; Keywood, Melita D.; Molloy, Suzie B.; Cheng, Min; Selleck, Paul W.

    2011-04-01

    An Indoor Air Quality Study of residential dwellings was carried out in Melbourne, Australia, and a subset of the data was analysed to investigate the effect of proximity to major roads on indoor air quality (IAQ). Seven-day measurements of PM 10, NO 2, benzene, toluene, ethylbenzene and xylenes, along with continuous CO and PM 2.5 measurements were utilised. The measurements were made indoors and outdoors in 27 dwellings; 15 Near Road (300 m from a major road). Dwellings were sampled for one week each in Winter/Spring 2008 and Summer/Autumn 2009, over an eight month period. Analysis of 7-day measurements showed that NO 2 and toluene were elevated at the 5% significance level both indoors and outdoors at Near Road Dwellings compared to Far Road Dwellings. Indoor/Outdoor (I/O) ratios of NO 2 and toluene were not significantly different between Near and Far Road dwellings giving no evidence of any anomalous dominant indoor source for NO 2 and toluene in Near Road dwellings. Indoor NO 2 was significantly correlated to gas stovetop and oven use in both Near and Far Road dwellings. In the absence of gas cooking, indoor NO 2 was elevated in Near Road dwellings relative to Far Road dwellings by approximately 4 ppb and this can be attributed to infiltration of outdoor air. I/O ratios for NO 2 were 2 indicating that indoor sources dominate with minor contribution from outdoors. Hence the relative contribution of roadways to indoor NO 2 is potentially greater than the relative contribution of roadways to indoor toluene. Findings elsewhere suggest that a similar outdoor enhancement of traffic related NO 2 (˜5 ppb) increases risk of lung cancer and childhood asthma ( Brauer et al., 2000; Nyberg et al., 2000). A simple conceptual model indicated spatial and temporal variance in the concentrations was the biggest limitation in detecting roadway influence outside Near Road dwellings for PM 10, PM 2.5 and NO 2 while measurement uncertainty was also important for CO.

  16. Dwell fatigue in two Ti alloys: An integrated crystal plasticity and discrete dislocation study

    Science.gov (United States)

    Zheng, Zebang; Balint, Daniel S.; Dunne, Fionn P. E.

    2016-11-01

    It is a well known and important problem in the aircraft engine industry that alloy Ti-6242 shows a significant reduction in fatigue life, termed dwell debit, if a stress dwell is included in the fatigue cycle, whereas Ti-6246 does not; the mechanistic explanation for the differing dwell debit of these alloys has remained elusive for decades. In this work, crystal plasticity modelling has been utilised to extract the thermal activation energies for pinned dislocation escape for both Ti alloys based on independent experimental data. This then allows the markedly different cold creep responses of the two alloys to be captured accurately and demonstrates why the observed near-identical rate sensitivity under non-dwell loading is entirely consistent with the dwell behaviour. The activation energies determined are then utilised within a recently developed thermally-activated discrete dislocation plasticity model to predict the strain rate sensitivities of the two alloys associated with nano-indentation into basal and prism planes. It is shown that Ti-6242 experiences a strong crystallographic orientation-dependent rate sensitivity while Ti-6246 does not which is shown to agree with recently published independent measurements; the dependence of rate sensitivity on indentation slip plane is also well captured. The thermally-activated discrete dislocation plasticity model shows that the incorporation of a stress dwell in fatigue loading leads to remarkable stress redistribution from soft to hard grains in the classical cold dwell fatigue rogue grain combination in alloy Ti-6242, but that no such load shedding occurs in alloy Ti-6246. The key property controlling the behaviour is the time constant of the thermal activation process relative to that of the loading. This work provides the first mechanistic basis to explain why alloy Ti-6242 shows a dwell debit but Ti-6246 does not.

  17. Influences of dwell time and cursor control on the performance in gaze driven typing

    OpenAIRE

    Helmert, Jens R.; Pannasch, Sebastian; Velichkovsky, Boris M.

    2008-01-01

    In gaze controlled computer interfaces the dwell time is often used as selection criterion. But this solution comes along with several problems, especially in the temporal domain: Eye movement studies on scene perception could demonstrate that fixations of different durations serve different purposes and should therefore be differentiated. The use of dwell time for selection implies the need to distinguish intentional selections from merely per-ceptual processes, described as the Midas touch ...

  18. Analysis of dysphagia risk using the modified dysphagia risk assessment for the community-dwelling elderly

    OpenAIRE

    Byeon, Haewon

    2016-01-01

    [Purpose] The elderly are susceptible to dysphagia, and complications can be minimized if high-risk groups are screened in early stages and properly rehabilitated. This study provides basic material for the early detection and prevention of dysphagia by investigating the risks of dysphagia and related factors in community-dwelling elders. [Subjects and Methods] Participants included 325 community-dwelling elderly people aged 65 or older. The modified dysphagia risk assessment for the communit...

  19. Impact of Interlayer Dwell Time on Microstructure and Mechanical Properties of Nickel and Titanium Alloys

    Science.gov (United States)

    Foster, B. K.; Beese, A. M.; Keist, J. S.; McHale, E. T.; Palmer, T. A.

    2017-09-01

    Path planning in additive manufacturing (AM) processes has an impact on the thermal histories experienced at discrete locations in simple and complex AM structures. One component of path planning in directed energy deposition is the time required for the laser or heat source to return to a given location to add another layer of material. As structures become larger and more complex, the length of this interlayer dwell time can significantly impact the resulting thermal histories. The impact of varying dwell times between 0 and 40 seconds on the microstructural and mechanical properties of Inconel® 625 and Ti-6Al-4V builds has been characterized. Even though these materials display different microstructures and solid-state phase transformations, the addition of an interlayer dwell generally led to a finer microstructure in both materials that impacted the resulting mechanical properties. With the addition of interlayer dwell times up to 40 seconds in the Inconel® 625 builds, finer secondary dendrite arm spacing values, produced by changes in the thermal history, correspond to increased yield and tensile strengths. These mechanical properties did not appear to change significantly, however, for dwell times greater than 20 seconds in the Inconel® 625 builds, indicating that longer dwell times have a minimal impact. The addition of interlayer dwell times in Ti-6Al-4V builds resulted in a slight decrease in the measured alpha lath widths and a much more noticeable decrease in the width of prior beta grains. In addition, the yield and tensile values continued to increase, nearly reaching the values observed in the rolled plate substrate material with dwell times up to 40 seconds.

  20. A comparative study of indoor radon concentrations between dwellings and schools

    International Nuclear Information System (INIS)

    Kapdan, E.; Altinsoy, N.

    2012-01-01

    The aim of this study is to determine the relationship of radon concentrations between dwellings and the schools located in the same regions and to obtain related indoor average radon concentration dwelling–school correction factor for similar locations. The research has been carried out by determining indoor radon concentrations at schools and dwellings located at the same districts in the selected two separate research fields called The Former Adapazari region and The New Adapazari region in the city of Adapazari using a total of 81 Cr-39 passive radon detectors for 75 days. The average radon concentrations have been determined for the dwellings and the schools in 15 districts of the Former Adapazari region as 59.9 Bq m −3 and 57.1 Bq m −3 , respectively. The results in 4 districts of the New Adapazari region were 63.5 Bq m −3 for the dwellings and 61.0 Bq m −3 for the schools. Moreover, the annual effective doses were calculated as 1.33 mSv/y and 1.41 mSv/y for the dwellings of Former Adapazari and New Adapazari, respectively. It was seen that the doses received in the dwellings are about four times the doses received in the schools. The indoor radon concentration dwelling–school correction factor was found to be 1.04±0.01 for the research area.

  1. Transformation of dwelling culture based on riverine community in Musi River Palembang

    Science.gov (United States)

    Wicaksono, Bambang; Siswanto, Ari; Kusdiwanggo, Susilo; Anwar, Widya Fransiska Febriati

    2017-11-01

    Palembang City development since the Palembang Darussalam Sultanate era to the reformation era has impact on the living culture community, less of the raft houses, houses on stilts transformed into a terraced house, and the house became the dominant land. Dwelling Culture oriented on transformation of river become land-oriented. The development has leaving identity, character, and potential of the riverine architecture and dwelling life of river. The goals of study are to describe a case and revealing the meaning of dwelling cultural transformation in Musi River society from the process of cultural acculturation and investigate the architectural aspect from the form of house and modes of dwelling through the structuralism approach. The data collection is conducted qualitatively by using data collection techniques such as observation, interview, literature study, whereas the method of analysis, is a method that is done through Levi-Strauss structuralism approach that identifies all the elements of community thought in a systematic procedure. The results showed the structure behind the orientation, position, shape, and layout of dwelling revealed through the meanings in it. It means, the change and development from cultural acculturation process which oriented in the land dwelling, based on structure thinking of Palembang society.

  2. Radon levels in dwelling shielded spaces (DSS) in Israel

    International Nuclear Information System (INIS)

    Haquin, G.; Margaliot, M.; Riemer, T.; Shamash, S.; Even, O.; Shamai, Y.

    2002-01-01

    Exposure to radon gas is known as the major contributor to the general public exposure to ionizing radiation. The typical radon concentration in Israeli houses with a direct ground contact is about 50 Bq/m 3 , attributed mainly to soil gas penetration into the house. All newly constructed buildings (since 1991) must include Dwelling Shielded Spaces (DSS) which are rooms made of massive solid concrete, equipped with air-tight steel door and window. The DSS serve as shelters against both explosive and chemical warfare. In normal practice, the DSS serves as a conventional room in the household. Standard size DSS contain a mass of around 35 tons of concrete with typical 2 26R a activity concentration of 30 Bq/kg. This mass of concrete is expected to increase the radon concentration in the DSS room due to exhalation from the building material. Published exhalation rate values from concrete in the US and Europe vary from 0.1 to 8 mBq/m 2 sec. (0.5 - 30 Bq/m 2 h). This work presents short and long-term radon measurements performed in high-rise building DSS's. Measurements of the free exhalation rate and wall exhalation rate as well as ventilation rate in DSS are also presented and the relation between these quantities is analyzed

  3. Electron microscopic examination of uncultured soil-dwelling bacteria.

    Science.gov (United States)

    Amako, Kazunobu; Takade, Akemi; Taniai, Hiroaki; Yoshida, Shin-ichi

    2008-05-01

    Bacteria living in soil collected from a rice paddy in Fukuoka, Japan, were examined by electron microscopy using a freeze-substitution fixation method. Most of the observed bacteria could be categorized, based on the structure of the cell envelope and overall morphology, into one of five groups: (i) bacterial spore; (ii) Gram-positive type; (iii) Gram-negative type; (iv) Mycobacterium like; and (v) Archaea like. However, a few of the bacteria could not be readily categorized into one of these groups because they had unique cell wall structures, basically resembling those of Gram-negative bacteria, but with the layer corresponding to the peptidoglycan layer in Gram-negative bacteria being extremely thick, like that of the cortex of a bacterial spore. The characteristic morphological features found in many of these uncultured, soil-dwelling cells were the nucleoid being in a condensed state and the cytoplasm being shrunken. We were able to produce similar morphologies in vitro using a Salmonella sp. by culturing under low-temperature, low-nutrient conditions, similar to those found in some natural environments. These unusual morphologies are therefore hypothesized to be characteristic of bacteria in resting or dormant stages.

  4. Planning for Serious Illness amongst Community-Dwelling Older Adults

    Directory of Open Access Journals (Sweden)

    Donna Goodridge

    2013-01-01

    Full Text Available Older adults have long been encouraged to maintain their autonomy by expressing their wishes for health care before they become too ill to meaningfully participate in decision making. This study explored the manner in which community-dwelling adults aged 55 and older plan for serious illness. An online survey was conducted within the province of Saskatchewan, Canada, with 283 adults ranging in age from 55 to 88 years. Planning for future medical care was important for the majority (78.4% of respondents, although only 25.4% possessed a written advance care plan and 41.5% had designated a substitute decision maker. Sixty percent of respondents reported conversations about their treatment wishes; nearly half had discussed unacceptable states of health. Associations between key predictor variables and planning behaviors (discussions about treatment wishes or unacceptable states of health; designation of a substitute decision maker; preparation of a written advance care plan were assessed using binary logistic regression. After controlling for all predictor variables, self-reported knowledge about advance care planning was the key variable significantly associated with all four planning behaviors. The efforts of nurses to educate older adults regarding the process of advance care planning can play an important role in enhancing autonomy.

  5. Factors related to falls among community dwelling elderly.

    Science.gov (United States)

    Kuhirunyaratn, Piyathida; Prasomrak, Prasert; Jindawong, Bangonsri

    2013-09-01

    Falls among the elderly can lead to disability, hospitalization and premature death. This study aimed to determine the factors related to falls among community dwelling elderly. This case-control study was conducted at the Samlium Primary Care Unit (SPCU), Khon Kaen, Thailand. Cases were elderly individuals who had fallen within the previous six months and controls were elderly who had not fallen during that same time period. Subjects were taken from elderly persons registered at the SPCU. The sample size was calculated to be 111 cases and 222 controls. Face to face interviews were conducted with subjects between May and June, 2011. The response rate was 100%. On bivariate analysis, the statistically significant factors related to falls were: regular medication use, co-morbidities, mobility, depression, cluttered rooms, slippery floors, unsupported toilets (without a hand rail), sufficient exercise, rapid posture change and wearing slippers. When controlling for others significant factors, multiple logistic regression revealed significant factors were: regular medication use (AOR: 2.22; 95%CI: 1.19 - 4.12), depression (AOR: 1.76, 95% CI: 1.03 - 2.99), sufficient exercise (AOR: 0.34; 95% CI: 0.19 - 0.58) and wearing slippery shoes (AOR: 2.31; 95% CI: 1.24 - 4.29). Interventions need to be considered to modify these significant factors associated with falls and education should be provided to these at risk.

  6. Modeling gamma radiation dose in dwellings due to building materials.

    Science.gov (United States)

    de Jong, Peter; van Dijk, Willem

    2008-01-01

    A model is presented that calculates the absorbed dose rate in air of gamma radiation emitted by building materials in a rectangular body construction. The basis for these calculations is formed by a fixed set of specific absorbed dose rates (the dose rate per Bq kg(-1) 238U, 232Th, and 40K), as determined for a standard geometry with the dimensions 4 x 5 x 2.8 m3. Using the computer codes Marmer and MicroShield, correction factors are assessed that quantify the influence of several room and material related parameters on the specific absorbed dose rates. The investigated parameters are the position in the construction; the thickness, density, and dimensions of the construction parts; the contribution from the outer leave; the presence of doors and windows; the attenuation by internal partition walls; the contribution from building materials present in adjacent rooms; and the effect of non-equilibrium due to 222Rn exhalation. To verify the precision, the proposed method is applied to three Dutch reference dwellings, i.e., a row house, a coupled house, and a gallery apartment. The averaged difference with MCNP calculations is found to be 4%.

  7. Adaptation Strategies and Resilience to Climate Change of Historic Dwellings

    Directory of Open Access Journals (Sweden)

    Carlos Rubio-Bellido

    2015-03-01

    Full Text Available Historic city centres have a large amount of dwellings in Europe, which were built to provide a comfortable shelter with the absence of mechanical means. The knowledge of climate responsive design strategies can play a significant role in reducing the energy demand of extant buildings, paving the way for its sustainable development in the face of the rising threat to its occupants of climate change. The residential architecture, developed, in most cases, in dense urban centres, was built using both available materials and traditional and academic construction technologies. This paper thoroughly investigates the extant urban conglomerate in Cádiz and analyses, in a qualitative and quantitative manner, which bioclimatic design strategies were applied and the city’s adaptation for future climate scenarios. The results indicate that historic housing in Cádiz is creatively adapted to the local natural conditions by means of a combination of climate responsive strategies, and there is significant scope for improvement in the ongoing response to global warming.

  8. Acceptance of low-flow mechanical ventilation in dwellings

    International Nuclear Information System (INIS)

    Mueller, V.; Peters, M.; Gubler, M.; Maillard, S.; Keller, L.

    2001-01-01

    This report presents the findings of a survey carried out on the acceptance of 'low-flow mechanical ventilation' (a fan-assisted balanced ventilation with heat recovery) for houses and apartments in Switzerland. The results were obtained on the one hand by reviewing and analysing articles appearing on the subject in the professional and daily press and by telephone interviews with 100 randomly chosen architects and 100 investors in the German and French-speaking parts of Switzerland on the other. These survey participants were asked to express their views on low-flow mechanical ventilation and experience already gained in this area. Further Interviews with tenants, 150 of whom lived in buildings fitted with low-flow mechanical ventilation and 300 in dwellings without this form of ventilation, provided information on the attitude of those directly affected, their satisfaction with the systems or their wishes. The report analyses the results of the surveys and proposes a plan of action to improve information and training for architects, owners and tenants

  9. [Prevalence of elder abuse in Spanish dwelling in community].

    Science.gov (United States)

    Pérez-Rojo, Gema; Izal, María; Montorio, Ignacio; Regato, Pilar; Espinosa, Juan Manuel

    2013-12-21

    Although elder abuse is not a new phenomenon, it remains hidden. There have been carried out various preliminary studies about the prevalence of elder abuse in different countries. The aim of this study is to estimate the prevalence of suspicion of elder abuse in old persons without cognitive impairment, dwelling in community, who were attended in Primary Health Care or Social Services Centres. We carried out a transverse study in which 340 elders participated. We found a 12.1% prevalence of suspicion of elder abuse. Psychological abuse suspicion was the most frequent type and it was very common the simultaneous presence of different types of abuse (psychological and physical and sexual). The suspicion of elder abuse was more frequent in women and spouses were responsible in a high great frequency. The information obtained allows advancing in the knowledge of elder abuse in Spain, where the research about this issue is poor. However, the prevalence found neither has to be considered as a social alarm nor as a social slackness. Copyright © 2012 Elsevier España, S.L. All rights reserved.

  10. Determinants of falls in community-dwelling elderly: hierarchical analysis.

    Science.gov (United States)

    Brito, Thais Alves; Coqueiro, Raildo da Silva; Fernandes, Marcos Henrique; de Jesus, Cleber Souza

    2014-01-01

    To analyze the fall-related factors in community-dwelling elderly. Epidemiologic cross-sectional population-based household study with hierarchical interrelationships among the potential risk factors. The sample was made up of noninstitutionalized individuals over age 60, who were resident of a city in Brazil's Northeast Region. The dependent variable was fall occurrence in the last 12 months; independent variables were sociodemographic, behavioral, health, and functional status factors. Multivariate hierarchical Poisson regression analysis was used based on a proposed theoretic model. Three hundred and sixteen (89.0%) elderly participated of the survey, average age 74.2 years; the majority was female, with limited literacy and had low-medium family income. The fall prevalence was of 25.8%; occurrence was related to depression symptoms (PR = 1.55) and balance limitation (PR = 1.56). The high fall prevalence among elderly necessitates the identification of fall-related factors for action planning prevention programs with this group. © 2014 Wiley Periodicals, Inc.

  11. Racial differences in anticholinergic use among community-dwelling elders.

    Science.gov (United States)

    Felton, Maria; Hanlon, Joseph T; Perera, Subashan; Thorpe, Joshua M; Marcum, Zachary A

    2015-04-01

    Few studies have examined racial differences in potentially inappropriate medication use. The objective of this study was to examine racial disparities in using prescription and/or nonprescription anticholinergics, a type of potentially inappropriate medication, over time. Longitudinal. Data from the Health, Aging, and Body Composition Study (years 1, 5, and 10). Three thousand fifty-five community-dwelling older adults, both blacks and whites, at year 1. Highly anticholinergic medication use per the 2012 American Geriatrics Society Updated Beers Criteria for Potentially Inappropriate Medication Use in Older Adults. Blacks represented 41.4% of the participants at year 1. At year 1, 13.4% of blacks used an anticholinergic medication compared with 17.8% of whites, and this difference persisted over the ensuing 10-year period. Diphenhydramine was the most common anticholinergic medication reported at baseline and year 5, and meclizine at year 10, for both races. Controlling for demographics, health status, and access to care factors, blacks were 24% to 45% less likely to use any anticholinergics compared with whites over the years considered (all P blacks than whites over a 10-year period, and the difference was unexplained by demographics, health status, and access to care.

  12. Radon as a risk factor in mines and dwellings

    Energy Technology Data Exchange (ETDEWEB)

    Axelson, O [Yrkesmedicinska kliniken, Regionsjukhuset, Linkoeping (Sweden)

    1985-03-01

    In mines, exposure to radon and radon daughters is the most important factor for the initiation of lung cancer. Tobacco smoke probably acts as a lung cancer promotor, but the relationship between minework, smoking and lung cancer is complicated. It is suggested that smokers may have a relative protection from a mucous sheet covering their basal cells. There is a connection between radon exposure in dwellings and lung cancer. Radon in buildings comes from the building material or the ground. The risk for developing lung cancer seems to be enhanced considerably by smoking. Tobacco contains some radioactivity itself (Lead 210 and Polonium 210), but tobacco smoke also adsorb electrically charged radon daughters and keeps them floating in the breathing air. Measurements show a doubling of radon daughter concentration in a room of normal size if 3-4 cigarettes are burnt out in it. A raised risk for lung cancer has been observed in connection with passive smoking. The relative risk for lung cancer is 2-3 for passive smokers and 5-6 for active smoking women. Children of smoking mothers who start smoking themselves develop lung cancer more easily than other groups. There seems to be a connection between early exposure to radon daughters, passive smoking and lung cancer.

  13. External exposure assessment in dwelling built with phosphogypsum

    International Nuclear Information System (INIS)

    Villaverde, Freddy Lazo

    2008-01-01

    In this study it was evaluated the viability of the use of phosphogypsum plates as a building material in the dwelling construction. Thus, the effective dose due to external gamma exposure was assessed through the 226 Ra, 232 Th, 210 Pb e 40 K activity concentration in phosphogypsum plates. Samples of this material were analyzed by high resolution gamma spectrometry for their natural radionuclide activity concentration. The radium equivalent activity and extern ai and inter nai hazard indices were also calculated. The plates were made with phosphogypsum from fertilizer industries located in Cajati, Cubatao and Uberaba. The samples were identified according to phosphogypsum origin, Cajati (CA), Cubatao (CT) and Uberaba (UB). The activity concentrations results varied from 15.9 to 392 Bq kg -1 for 226 Ra, 26.1 to 253 Bq kg -1 for 232 Th, and 27.4 to 852 Bq kg -1 for 210 Pb. The results of 40 K were lower than 81 Bq kg -1 . The annual effective dose was obtained through the dosimetric model with reference standard room concept, the results were 0.02 mSv y -1 for a house built with phosphogypsum from origin CA, 0.2 mSvy -1 for CT phosphogypsum and 0.14 mSvy -1 for UB phosphogypsum, everything the effective doses were below 1 mSvy -1 , an annual effective dose limit for public exposure by International Commission on Radiological Protection. (author)

  14. Indoor tetrachloroethylene levels and determinants in Paris dwellings.

    Science.gov (United States)

    Roda, Célina; Kousignian, Isabelle; Ramond, Anna; Momas, Isabelle

    2013-01-01

    There is growing public health concern about indoor air quality. Tetrachloroethylene (PERC), a chlorinated volatile organic compound widely used as a solvent in dry cleaning facilities, can be a residential indoor air pollutant. As part of an environmental investigation included in the PARIS (Pollution and asthma Risk: an Infant Study) birth cohort, this study firstly aimed to document domestic PERC levels, and then to identify the factors influencing these levels using standardized questionnaires about housing characteristics and living conditions. Air samples were collected in the child's bedroom over one week using passive devices when infants were 1, 6, 9, and 12 months. PERC was identified and quantified by gas chromatography/mass spectrometry. PERC annual domestic level was calculated by averaging seasonal levels. PERC was omnipresent indoors, annual levels ranged from 0.6 to 124.2 μg/m3. Multivariate linear and logistic regression models showed that proximity to dry cleaning facilities, do-it-yourself activities (e.g.: photographic development, silverware), presence of air vents, and building construction date (<1945) were responsible for higher domestic levels of PERC. This study, conducted in an urban context, provides helpful information on PERC contamination in dwellings, and identifies parameters influencing this contamination. Copyright © 2012 Elsevier Inc. All rights reserved.

  15. Evidence and role of phlebitis and lipid infiltration in the onset and pathogenesis of Wooden Breast Disease in modern broiler chickens.

    Science.gov (United States)

    Papah, Michael B; Brannick, Erin M; Schmidt, Carl J; Abasht, Behnam

    2017-12-01

    Wooden Breast Disease (WBD), a myopathy that frequently affects modern broiler chickens, is a disorder that has been associated with significant economic losses in the poultry industry. To examine tissue changes associated with the onset and early pathogenesis of this disorder, a time-series experiment was conducted using chickens from a high-breast-muscle-yield, purebred commercial broiler line. Birds were raised for up to seven weeks, with a subset of birds sampled weekly. Breast muscle tissues were extracted at necropsy and processed for analysis by light microscopy and transmission electron microscopy. Histologic presentation indicated localized phlebitis with lipogranulomas in Week 1, focal single-myofibril degeneration in Week 2 preceding an inflammatory response that started in Week 3. Lesions in Week 4 were characterized by multifocal to diffuse muscle fibre degeneration, necrosis, interstitial oedema accompanied by increased lipid and inflammatory cell infiltration. Lesions in Weeks 5-7 revealed diffuse muscle degeneration, necrosis, fibrosis and fatty infiltration with lipogranulomas. Ultrastructural examination showed myofibrillar splitting and degeneration, irregular, displaced and degenerated Z-lines, mitochondrial degeneration and interstitial fibrosis with dense regular collagen fibres. This study, therefore, demonstrates that WBD exhibits an earlier onset in modern broilers than when detectable by clinical examination. Further, this study shows that the disease assumes a progressive course with acute vasculitis, lipid deposition and myodegeneration occurring in the earlier stages, followed by a chronic fibrotic phase.

  16. Occupational asthma caused by samba (Triplochiton scleroxylon) wood dust in a professional maker of wooden models of airplanes: a case study.

    Science.gov (United States)

    Krawczyk-Szulc, Patrycja; Wiszniewska, Marta; Pałczyński, Cezary; Nowakowska-Świrta, Ewa; Kozak, Anna; Walusiak-Skorupa, Jolanta

    2014-06-01

    Wood dust is a known occupational allergen that may induce, in exposed workers, respiratory diseases including asthma and allergic rhinitis. Samba (obeche, Triplochiton scleroxylon) is a tropical tree, which grows in West Africa, therefore, Polish workers are rarely exposed to it. This paper describes a case of occupational asthma caused by samba wood dust. The patient with suspicion of occupational asthma due to wood dust was examined at the Department of Occupational Diseases and Clinical Toxicology in the Nofer Institute of Occupational Medicine. Clinical evaluation included: analysis of occupational history, skin prick tests (SPT) to common and occupational allergens, determination of serum specific IgE to occupational allergens, serial spirometry measurements, metacholine challenge test and specific inhalation challenge test with samba dust SPT and specific serum IgE assessment revealed sensitization to common and occupational allergens including samba. Spirometry measurements showed mild obstruction. Metacholine challenge test revealed a high level of bronchial hyperactivity. Specific inhalation challenge test was positive and cellular changes in nasal lavage and induced sputum confirmed allergic reaction to samba. IgE mediated allergy to samba wood dust was confirmed. This case report presents the first documented occupational asthma and rhinitis due to samba wood dust in wooden airplanes model maker in Poland.

  17. Occupational asthma caused by samba (Triplochiton scleroxylon wood dust in a professional maker of wooden models of airplanes: A case study

    Directory of Open Access Journals (Sweden)

    Patrycja Krawczyk-Szulc

    2014-08-01

    Full Text Available Objectives: Wood dust is a known occupational allergen that may induce, in exposed workers, respiratory diseases including asthma and allergic rhinitis. Samba (obeche, Triplochiton scleroxylon is a tropical tree, which grows in West Africa, therefore, Polish workers are rarely exposed to it. This paper describes a case of occupational asthma caused by samba wood dust. Material and Methods: The patient with suspicion of occupational asthma due to wood dust was examined at the Department of Occupational Diseases and Clinical Toxicology in the Nofer Institute of Occupational Medicine. Clinical evaluation included: analysis of occupational history, skin prick tests (SPT to common and occupational allergens, determination of serum specific IgE to occupational allergens, serial spirometry measurements, metacholine challenge test and specific inhalation challenge test with samba dust. Results: SPT and specific serum IgE assessment revealed sensitization to common and occupational allergens including samba. Spirometry measurements showed mild obstruction. Metacholine challenge test revealed a high level of bronchial hyperactivity. Specific inhalation challenge test was positive and cellular changes in nasal lavage and induced sputum confirmed allergic reaction to samba. Conclusions: IgE mediated allergy to samba wood dust was confirmed. This case report presents the first documented occupational asthma and rhinitis due to samba wood dust in wooden airplanes model maker in Poland.

  18. A study of the Chinese organic-inorganic hybrid sealing material used in 'Huaguang No.1' ancient wooden ship

    Energy Technology Data Exchange (ETDEWEB)

    Fang, Shiqiang [Department of Chemistry, Zhejiang University, Hangzhou 310027 (China); College of Chemical Engineering and Materials Science, Zhejiang University of Technology, Hangzhou 310014 (China); Zhang, Hui [Department of Cultural Heritage and Museology, Zhejiang University, Hangzhou 310028 (China); Zhang, Bingjian, E-mail: zhangbiji@zju.edu.cn [Department of Chemistry, Zhejiang University, Hangzhou 310027 (China); Department of Cultural Heritage and Museology, Zhejiang University, Hangzhou 310028 (China); Wei, Guofeng [Department of Chemistry, Zhejiang University, Hangzhou 310027 (China); Li, Guoqing [Museum of Overseas Communication History Quanzhou, Fujian 362000 (China); Zhou, Yang [China National Silk Museum, Hangzhou 310002 (China)

    2013-01-10

    Highlights: Black-Right-Pointing-Pointer The composition of ancient sealing material was analyzed. Black-Right-Pointing-Pointer The excellent performance of this sealing material comes from the compact structure. Black-Right-Pointing-Pointer This structure is established through coordination and oxidative polymerization. Black-Right-Pointing-Pointer Conservation of ancient relies to a knowledge on their materials and crafts. - Abstracts: Chu-nam putty is a special organic-inorganic hybrid material invented by ancient Chinese people. It was prepared by mixing tung-oil, lime and oakum (plant fibers like jute, ramie and so on) with excellent sealing performance. The invention and application of Chu-nam putty in wooden ship lead to improvement in sailing technology and ship safety issue. In this paper, the analytical results of a piece of chu-nam putty which was discovered in 'Huaguang No.1' ancient ship are presented. The results show that the components of chu-nam putty are calcite, carboxylate and unsaturated esters by means of FT-IR, XRD and TGA/DSC. And the FT-IR and cross-section microscopic analysis confirm that the oakum was from jute. Comparing with the modeling putty samples it is found that the outstanding sealing performance of chu-nam putty comes from the coordination reaction of Ca{sup 2+} from the Ca(OH){sub 2} and the oxidation aggregation reaction of C=C double bonds in unsaturated fatty acid.

  19. A study of the Chinese organic–inorganic hybrid sealing material used in “Huaguang No.1” ancient wooden ship

    International Nuclear Information System (INIS)

    Fang, Shiqiang; Zhang, Hui; Zhang, Bingjian; Wei, Guofeng; Li, Guoqing; Zhou, Yang

    2013-01-01

    Highlights: ► The composition of ancient sealing material was analyzed. ► The excellent performance of this sealing material comes from the compact structure. ► This structure is established through coordination and oxidative polymerization. ► Conservation of ancient relies to a knowledge on their materials and crafts. - Abstracts: Chu-nam putty is a special organic–inorganic hybrid material invented by ancient Chinese people. It was prepared by mixing tung-oil, lime and oakum (plant fibers like jute, ramie and so on) with excellent sealing performance. The invention and application of Chu-nam putty in wooden ship lead to improvement in sailing technology and ship safety issue. In this paper, the analytical results of a piece of chu-nam putty which was discovered in “Huaguang No.1” ancient ship are presented. The results show that the components of chu-nam putty are calcite, carboxylate and unsaturated esters by means of FT-IR, XRD and TGA/DSC. And the FT-IR and cross-section microscopic analysis confirm that the oakum was from jute. Comparing with the modeling putty samples it is found that the outstanding sealing performance of chu-nam putty comes from the coordination reaction of Ca 2+ from the Ca(OH) 2 and the oxidation aggregation reaction of C=C double bonds in unsaturated fatty acid.

  20. Energy reserch in the mechanical forest industry 1980-1982. Energy consumption in the manufacture of joinery products, wooden houses and in the further processing of sawn timber

    Energy Technology Data Exchange (ETDEWEB)

    Tarvainen, V.; Froeblom, J.

    1983-03-01

    Energy consumption in the mechanical forest industry in 1979 was studied by sending questionnairies to all the significant factories Information was requested on power and heat consumption and installed power in separate process phases. For background information, some aspects of the production process were also requested. The factories which answered the inquiry produced about one half of the doors and windows manufactured in 1979, one sixth of the finger jointed timber and about one third of other products in the branch. The total energy consumption in the branch was 1 556 TJ, 77% was heat. The share of the joinery industry (doors, windows and fixtures) in the total was 2/3, of which 86% was heat energy. The energy needed in the wooden house industry was 219 TJ, in planing works 137 TJ, in the gluelam industry 86 TJ, in finger jointing 76 TJ and in the production of roof trusses about 6 TJ. The investigated brances accounted for 7% of the energy consumption of the whole mechanical forest industry. The energy consumption in producing products of the same type in different factories varied very much. The differences were partially structural. However, there is considerable room for energy savings in many of the factories.

  1. Indoor radon levels and inhalation doses in dwellings near the some sites of Himachal Pradesh, India

    International Nuclear Information System (INIS)

    Bajwa, B.S.; Singh, S.; Virk, H.S.

    2005-01-01

    In view of the fact that radon and its daughters are a major source of natural radiation exposure, the measurement of radon concentration levels in dwellings has assumed ever-increasing importance. Keeping this in view, the indoor radon level measurements were carried out in the dwellings of different villages known to be located in the vicinity of uranium-mineralized pockets of Hamirpur district, Himachal Pradesh. Track-etch technique, a passive method using the Solid State Nuclear Track Detectors (SSNTDs), LR-115 type II, was utilized for these measurements. An attempt has been made to assess the levels of the indoor radon in the dwellings and inhalation dose rates of the population living in these villages. The radon concentrations were found to be varying with seasonal changes, building materials and mode of construction of houses. The radon concentrations were found to be higher in houses made from local sandstone and with mud floor in comparison to the houses having cemented brick floors. The annual indoor radon concentration and thus annual effective dose in most of the dwellings of these villages is certainly quite higher and even in some of the dwellings it even exceeds the upper limit of the proposed action level of ICRP, 1993. The inhalation dose rates in dwellings of these villages located in the vicinity of uranium mineralized pockets of Hamirpur district, Himachal Pradesh have been found to be quite higher than dose rate in the dwellings in the Amritsar city, Punjab, which is located in a completely uranium free zone. The radon survey in the dwellings of these villages has also been carried out using the Alpha-Guard technique, which is based on the pulse ionization chamber. The indoor radon concentration levels measured using the active technique of Alpha Guard have been found to be quite different from those measured in these dwellings by the passive technique of SSNTDs; indicating the importance of the SSNTDs in the long-term integrated measurement

  2. Determination of dose factors for external gamma radiation in dwellings

    International Nuclear Information System (INIS)

    Maduar, M.F.; Hiromoto, G.

    2000-01-01

    A significant contribution to the global population exposure to ionizing radiation arises from natural sources, especially from radionuclides present in terrestrial crust. Human activities can eventually increase that exposure to significant levels, from the point of view of radiological protection. The presence of natural radionuclides in building materials may lead to an increment of both external and internal radiation exposure of the population. External exposure in dwellings arises from gamma-emitter radionuclides existing in the walls, floor and ceiling of their rooms. Mathematical models can be used to predict external dose rates inside the room, known the radionuclide concentration activities in dwelling constituents. This paper presents a methodology for theoretical evaluation of external gamma doses due to radionuclides present in the walls of an hypothetical standard room. The room is modeled as three pairs of rectangular sheets with finite thickness. Assessment of doses was performed through the application of photon transport model, taking in account self-absorption and radiation buildup. As the external dose due to a particular radionuclide is proportional to its activity concentration, results are presented as dose factors, defined as a ratio of absorbed dose (nGy.h -1 ) to the activity concentration (Bq.kg -1 ), for each radionuclide. The radionuclides were assumed to be uniformly distributed in the building materials. Calculations were performed for concrete walls and results are presented for 40 K, 226 Ra, and 232 Th, taking in account, for dose calculations, all gamma emitters from 226 Ra and 232 Th decay chains. Sensitivity of the model was estimated by varying four of its input parameters within a reasonable range of applicability, while leaving all other parameters at fixed selected values. The parameters studied and respective ranges of variation were: for thickness, 5 to 60 cm; for density, 0.5 to 4 g.cm -3 ; for the room length, 1.5 to 10 m

  3. Existing condition assessment of radiation environment quality in dwellings

    International Nuclear Information System (INIS)

    Xu Jiaang; Li Fusheng; Chen Yingmin; Zhu Jianguo; Lu Feng; Song Gang

    2008-01-01

    Objective: To assess the radiactivity levels of Jinan dwellings and the indoor environment quality. Methods: Using the self made Measurement Cups of Indoor Environmental Radioactivity Evaluation (MCIERE) (ZL 200620082698.7) to measure the gamma ray dose rate, 222 Rn activity concentration, 220 Rn activity concentration and EECTn. Results: The geometric mean of 222 Rn activity concentrations that showed a clear lognoxmal distribution tendency in 411 rooms of Jinan was 45 Bq ·m -3 , the range which was from 18 to 203 Bq·m -3 . The geometric mean of 220 Rn activity concentration that was also nearly lognormal distribution in 203 rooms of Jinan was 16 Bq·m -3 and the range of the activity coneentratons was from 1 to 167 Bq· m -3 . The geometric mean of EECT, that was nearly lognormal distribution in 204 rooms of Jinan was 1.082 Bq ·m -3 , the range was from 0.015 to 10.230 Bq·m -3 . The arithmetic mean of the gamma ray dose rate that was nearly Gaussian distribution in 412 rooms of Jinan was 0.106 μSv·h -1 , the concentration range from 0.041 to 0.167 μSv·h -1 . Conclusion: The internal irradiation annual effective dose caused by 222 Rn and its progeny, 220 Rn and its progeny and of Jinan inhabitant was 1.189 mSv, the external irradiation annual effective close caused by the gamma ray from the ground and buildings was 0.743 mSv. The mean total annual effective dose was 2.187 mSv and the highest annual effective dose level was above 5 mSv. (authors)

  4. Characteristics of napping in community-dwelling insomnia patients.

    Science.gov (United States)

    Jang, Kwang Ho; Lee, Jung Hie; Kim, Seong Jae; Kwon, Hyo Jeong

    2018-05-01

    We aimed to determine napping characteristics of community-dwelling patients with insomnia disorder (ID) compared to characteristics of normal controls (NC), and to examine the effect of napping on nocturnal sleep. Adult volunteers who were more than 18 years old were recruited from three rural public health centers in Korea. Data from actigraphy recording and a sleep diary filled out for seven days were obtained. Finally, 115 ID patients and 80 NC subjects were included in this study. Parameters and timing of nocturnal sleep and nap were compared between the ID and NC groups. Two-way analysis of covariance (ANCOVA) was performed to determine the effect of ID diagnosis and napping on sleep parameters. Sleep efficiency (SE) in the ID group was significantly lower (p = 0.010), and wake time after sleep onset (WASO) was significantly greater (p = 0.023), compared to the NC group. There was no significant difference in nocturnal sleep or nap timing between the two groups. Nap frequency in the ID group was significantly higher than that in the NC group (p = 0.025). Although ID diagnosis and napping had no independent effect on fragmentation index, their interaction had a significant effect on fragmentation index (p = 0.021). Nap frequency was positively correlated with PSQI score (r = 0.166, p = 0.033). Insomnia patients showed no significant difference in nap timing or nap duration compared to NC subjects. However, insomnia patients showed higher nap frequency. Frequent napping was associated with poorer subjective sleep quality. Therefore, although napping might not have a negative impact on nocturnal sleep maintenance in NC subjects, it did have an effect on nocturnal sleep in insomnia patients. Copyright © 2018 Elsevier B.V. All rights reserved.

  5. Measurements of external radiation in United States dwellings

    International Nuclear Information System (INIS)

    Miller, K.M.

    1992-01-01

    The results of a survey of terrestrial gamma radiation levels are reported for the United States. This database represents a total of 1074 measurements in and around 247 different dwellings in several different areas of the country. The absorbed dose rate in air outdoors was found to range between 14 and 118 nGy.h -1 and averaged 46.6. nGy.h -1 , while for indoors it ranged between 12 and 160 nGy.h -1 and averaged 37.6 nGy.h -1 . Apart from regional differences in the terrestrial gamma levels, variations of up to a factor of 2 can be seen in the same geographical area. Variations within a house are typically large, with basement living areas averaging 50% higher than second-floor areas. Houses of full brick construction had average indoor levels 50% higher than those for wood frame houses. The material used for interior wall construction was not found to strongly influence the indoor dose rates except for rooms containing brick, cinder block or stone. For wood frame houses, including those of brick veneer exteriors, a linear regression analysis indicates that the average indoor dose rate can be reasonably well predicted based on a constant, which relates to the building contribution, and a shielding factor for the outdoor dose rate. Using the data collected in this survey and the population weighted mean outdoor absorbed dose rate in air reported for the US, the corresponding mean indoor value is estimated to be 37 nGy.h -1 . This value is in the low end of the range reported for other countries and is about half the estimated worldwide average of 70 nGy.h -1 . (author)

  6. Hypoactive sexual desire dysfunction in community-dwelling older women.

    Science.gov (United States)

    Zeleke, Berihun M; Bell, Robin J; Billah, Baki; Davis, Susan R

    2017-04-01

    To determine the prevalence of hypoactive sexual desire dysfunction (HSDD) and its associated factors in women aged 65 to 79 years. A questionnaire-based, cross-sectional study was conducted amongst community-dwelling older women. Participants were recruited between April and August 2014 from a national database based on electoral rolls. Sexual function and sexual distress were assessed by the Female Sexual Function Index and the Female Sexual Distress Scale-Revised, respectively. HSDD was defined as the presence of both low sexual desire and sexually related personal distress. The mean ± SD age of the 1,548 women was 71 ± 3.4 years and 52.6% were partnered. Among the participants, 88.0% (95% confidence interval [CI], 86.3%-89.6%) had low sexual desire, 15.5% (95% CI, 13.8%-17.4%) had sexually related personal distress, and 13.6% (95% CI, 11.9%-15.4%) had HSDD. The HSDD was more common among partnered than among unpartnered women (23.7% vs 5.9%; P dysfunction (AOR = 1.92; 95% CI, 1.29-2.92), and having moderate-to-severe depressive symptoms (AOR = 4.15; 95% CI, 2.16-7.96) were independently associated with having HSDD. In a subanalysis, HSDD was more common among sexually active than sexually inactive women (31.5% vs 17.3%; P sexually active women had HSDD, as did 22% (95% CI, 11.5%-37.8%) of unpartnered sexually active women. HSDD is common and associated with potentially modifiable risk factors in older women. It should not be assumed that unpartnered older women are sexually inactive or are not distressed by low sexual desire.

  7. Risk factors of falls in community dwelling active elderly.

    Science.gov (United States)

    Tuunainen, Eeva; Rasku, Jyrki; Jäntti, Pirkko; Pyykkö, Ilmari

    2014-02-01

    To search for measures to describe and relate to accidental falls in community dwelling elderly. A EuroQol EQ-5D questionnaire based on a patient's otoneurological case history provided a general health related quality of life measure, a fall history for the last 3 months and force platform measures for 96 active elderly from a pensioner organization. On average, the elderly experienced 0.3 falls over the preceding three months. A fall was seen to cause a significant deterioration in the quality of life and vertigo and caused fear of falling. The postural instability correlated with falls. Vertigo was present among 42% and was most commonly characterized as episodic and rotatory in factorial analysis items relating to vertigo correlated to falls and balance complaints. Four factors were identified and three of these correlated with falls. Vestibular failure correlated to a fall occurring when a person was rising up; Movement intolerance correlated with falls due to slips and trips, and Near-syncope factor correlated to falls for other reasons. In posturography, the variable measuring critical time describing the memory based "closed loop" control of postural stability carried a risk for accidental fall with an odds ratio of 6. The variable measuring zero crossing velocity showed a high rate of velocity change around the neutral position of stance. Vertigo and poor postural stability were the major reasons for falls in the active elderly. In ageing, postural control is shifted towards open loop control (visual, proprioception, exteroception and vestibular) instead of closed loop control and is a factor that contributes to a fall. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  8. Insomnia among community dwelling elderly in Alexandria, Egypt.

    Science.gov (United States)

    Ayoub, Abla I; Attia, Medhat; El Kady, Heba M; Ashour, Ayat

    2014-12-01

    Insomnia is a common problem in the elderly population. Poor sleep quality is associated with decreased memory and concentration, increased risk of falls, cognitive decline, and higher rate of mortality. Inadequate sleep hygiene such as irregular sleep schedules, use of stimulants, and daytime naps may predispose to insomnia. The aim of this study was to determine the prevalence of insomnia among community dwelling elderly in Alexandria and to assess some of the risk factors and comorbid conditions related to insomnia. This is a cross-sectional study conducted among 380 elderly people taken from different clubs in Alexandria using a predesigned structured interview questionnaire. Data on sociodemographic characteristics, medical history, and personal and sleeping habits were collected. The Insomnia Severity Index was used to assess insomnia and the Depression Anxiety Stress Scale was used to measure depression, anxiety, and stress. One-third (33.4%) of the elderly suffered from insomnia. On logistic regression, the most independent factors that were significantly associated with insomnia were number of chronic diseases [odds ratio (OR)=7.25 for having ≥5 diseases], being female (OR=2.37), anxiety (OR=1.91), watching television in bed before sleeping (OR=1.90), depression (OR=1.74), nocturia (OR=1.13), and daily sunlight exposure (OR=0.57). Insomnia is a common problem among the elderly in Alexandria. Female sex, chronic diseases, mental health problems, and bad sleep hygiene practice increase the risk for insomnia. Improving knowledge among the elderly about the prevalence and risk factors of insomnia could help the development of effective public health prevention and intervention programs for better sleep quality.

  9. Radon concentrations in different types of dwellings in Israel

    International Nuclear Information System (INIS)

    Epstein, L.; Koch, J.; Riemer, T.; Haquin, G.; Orion, I.

    2014-01-01

    The average radon concentration in Israeli dwellings was assessed by combining the results of a 2006 radon survey in single family houses with the results of a 2011 radon survey in apartments of multi-storey buildings. Both surveys were based on long-term measurements using CR-39 detectors. The survey in multi-storey buildings was intended to assess the influence of recent practices in the local building industry on the radon concentrations. These practices include the use of building materials with higher concentrations of the natural radionuclides in the last 20 y than before, as well as the improvement in sealing techniques over that period. Another practice in place since the early 1990's is the building of a shielded area in every apartment that is known as an RSS (residential secure space). The RSS is a room built from massive concrete walls, floor and ceiling that can be hermetically sealed and is intended to protect its residents from a missile attack. The influence of the above-mentioned features on radon concentrations was estimated by dividing the participating apartments into two groups: apartments in buildings >20 y, built using building materials with low concentrations of the natural radionuclides, regular sealing and without an RSS and apartments in buildings newer than 10 y, built using building materials with higher concentrations of the natural radionuclides, improved sealing and including an RSS. It was found that the average radon concentration in apartments in new buildings was significantly higher than in old buildings and the average radon concentration in single-family houses was significantly higher than in apartments in multi-storey buildings. Doses due to indoor radon were estimated on the basis of the updated information included in the 2009 International Commission on Radiological Protection statement on radon. (authors)

  10. Classical tandem-source dwelling covering the entire uterus. Essential in modern intracavitary radiotherapy for cervical cancer?

    International Nuclear Information System (INIS)

    Ohara, Kiyoshi; Nemoto, Keiko; Ohnishi, Kayoko; Hashimoto, Takayuki; Fukumitsu, Nobuyoshi; Hata, Masaharu; Sugahara, Shinji; Tokuuye, Koichi; Akine, Yasuyuki

    2007-01-01

    We investigated whether conventional tandem-source dwelling to cover the entire uterus, classically regarded as the target volume, is necessary in modem intracavitary radiotherapy (ICRT) for cervical cancer. The study included 95 cervical squamous cell carcinoma patients treated by high-dose-rate ICRT (point A dose was 6.0 Gy, with three to five insertions per patient) after external beam radiotherapy (EBRT), with central pelvic doses of 12-50 Gy. The tandem-source dwell length was adjusted to the target volume specified by magnetic resonance (MR) imaging. A tandem applicator was inserted as far as the uterine fundus in accordance with the post-EBRT MR-assessed cavity length. The pre-EBRT MR-specified target volume was used for the dwell-length adjustment. The safety of the dwell-length adjustment was assessed in terms of treatment failure. The dwell-length adjustment was made in 248 of 366 total insertions with a dwell-length reduction of 5-55 mm (median 15 mm) at the corpus. Pelvic failure was identified in 22 patients with a 2-year pelvic disease-free survival rate of 75.6% but without evidence of failure at dwelling-skipped corpuses. Given after pelvic EBRT and ICRT of full-length dwelling in part, which may have eradicated possible subclinical extension, adjustment of the tandem-source dwell length to the MR-specified target volume appeared to be safe. (author)

  11. The Study of Stages and Operations Involved in the Preservation and Restoration of two XIX-th Century Icons, on Wooden Support

    Directory of Open Access Journals (Sweden)

    Marius Munteanu

    2014-10-01

    Full Text Available The paper presents the stages and the operations involved in the preservation and restoration of two icons on wooden support, from the XIX-th century, which are part of the heritage of the ”Sfinții Arhangheli Mihail and Gavriil” church, from Galați. The two icon have inventory numbers as part of the collection as followed: 112 for the first icon and 113 for the second one. Both icons have the same theme, ”The Grieving Mother from Rohia” and are made by anonymous painters in egg tempera, on lime wooden support, without ground. Being part of the same collection, they were deposited in the same place and as a direct consequence, they suffer from similar deteriorations and degradations that affect both the support and the painting layer. Both panels are attacked by xylophagous insects and the painting layer has detachments, gaps, cracks, clogged dirt and a cracked and degraded varnish layer. Ten samples taken from the already detached areas were analyzed by optical microscope, SEM-EDX and micro-FTIR. Based on the chemical elements identified in the EDX spectrums, the pigments used to create the painting layer are: ultramarine natural blue Na8-10Al6Si6O24S2-4, carbon black, earth green, K[(Al,FeIII,(FeII,Mg](AlSi3,Si4O10(OH2, ocher (FeO, burned or natural umber Fe2O3· H2O + MnO2·n H2O+ Al2O3, lead white (2PbCO3·Pb(OH2 and yellow iron oxide (Fe2O3·4H2O. It was also determined that the gold leaf usually used in byzantine icons was replaced in the case of both icons: the icon number 112 has silver leaf covered with varnish, while the halo of the icon number 113 was created with yellow metallic pigments (realgar or orpigment.The pigments were also identified by determining specific peaks in micro-FTIR spectrums. For natural ultramarine blue the peaks between 628 - 724 cm-1 were assigned; the peaks in the interval 795 - 887 cm-1 confirm the presence of carbonates (calcium and lead based. The earth green pigment (aluminum - silicates had the

  12. [Symptoms of sick house syndrome and contributory factors; study of general dwellings in Hokkaido].

    Science.gov (United States)

    Saijo, Yasuaki; Reiko, Kishi; Sata, Fumihiro; Katakura, Yoko; Urashima, Yukio; Hatakeyama, Akiko; Mukaihara, Norihiko; Kobayashi, Satoshi; Jin, Kazuo; Iikura, Yoji

    2002-11-01

    The aim of this study was to clarify the "Sick House Syndrome" which has recently received increasing attention, and to investigate relationships between symptoms and the state of general dwellings in Hokkaido. Questionnaires were sent to residents in 1775 dwellings, mainly solitary houses built or remodeled within the past few years by 24 construction companies in Sapporo and its environs, and answers was received from 564. The questionnaires included queries about building structure and characteristics, the residents' habits in the home, and subjective symptoms. We requested one resident who had the most severe symptoms in the dwelling to answer a questionnaire about symptoms. We classified the symptoms into 11 categories, and selected those that developed or were aggravated after the building or remodeling. We defined dwellings in which inhabitants complained of one or more categories of symptoms as the group with sick-house-related disease (developed or aggravated group: DA group), and those in which the inhabitants complained of two or more symptoms as the group with sick house syndrome (more than one organic symptom group: MO group)". Associations between symptoms and dwellings were then studied. There were 201 dwellings for which residents complained of symptoms (37.2%). Of these, 94 were in the DA group (16.7%), and 57 (10.1%) in the MO group. The symptoms that developed or were aggravated after building or remodeling of the dwellings were throat, 7.1%, dermal, 6.9%, psychoneural, 5.3%, eye, 5.1%, and nasal problems, 4.1%. Unpleasant odors form furniture were significant in both groups (DA: crude odds ratio (OR) 2.66, MO: OR 3.24). Use of aromatics was significant in group DA (OR 1.78). Condensation on windows and mold growth in the dwellings were significant in both groups (condensation on windows; DA: OR 2.98, MO: OR 3.32, mold growth; DA: OR 3.11, MO: OR 3.24). In addition, the percentage of dwellings for which residents complained of symptoms increased

  13. A Double Dwell High Sensitivity GPS Acquisition Scheme Using Binarized Convolution Neural Network

    Directory of Open Access Journals (Sweden)

    Zhen Wang

    2018-05-01

    Full Text Available Conventional GPS acquisition methods, such as Max selection and threshold crossing (MAX/TC, estimate GPS code/Doppler by its correlation peak. Different from MAX/TC, a multi-layer binarized convolution neural network (BCNN is proposed to recognize the GPS acquisition correlation envelope in this article. The proposed method is a double dwell acquisition in which a short integration is adopted in the first dwell and a long integration is applied in the second one. To reduce the search space for parameters, BCNN detects the possible envelope which contains the auto-correlation peak in the first dwell to compress the initial search space to 1/1023. Although there is a long integration in the second dwell, the acquisition computation overhead is still low due to the compressed search space. Comprehensively, the total computation overhead of the proposed method is only 1/5 of conventional ones. Experiments show that the proposed double dwell/correlation envelope identification (DD/CEI neural network achieves 2 dB improvement when compared with the MAX/TC under the same specification.

  14. Ownership of dwelling affects the sex ratio at birth in Uganda.

    Directory of Open Access Journals (Sweden)

    Bernard Wallner

    Full Text Available BACKGROUND: Socio-economic conditions can affect the secondary sex ratio in humans. Mothers under good environmental conditions are predicted to increase the birth rates of sons according to the Trivers-Willard hypothesis (TWH. This study analyzed the effects of ownership and non-ownership of dwellings on the sex ratio at birth (SRB on a Ugandan sample. METHODOLOGY/PRINCIPAL FINDINGS: Our investigation included 438,640 mothers aged between 12 and 54 years. The overall average SRB was 0.5008. Mothers who live in owned dwellings gave increased births to sons (0.5019 compared to those who live in non-owned dwellings (0.458. Multivariate statistics revealed the strongest effects of dwelling ownership when controlling for demographic and social variables such as marital status, type of marriage, mothers' age, mothers' education, parity and others. CONCLUSIONS/SIGNIFICANCE: The results are discussed in the framework of recent plausible models dealing with the adjustment of the sex ratio. We conclude that the aspect of dwelling status could represent an important socio-economic parameter in relation to SRB variations in humans if further studies are able to analyze it between different countries in a comparative way.

  15. Ownership of dwelling affects the sex ratio at birth in Uganda.

    Science.gov (United States)

    Wallner, Bernard; Fieder, Martin; Seidler, Horst

    2012-01-01

    Socio-economic conditions can affect the secondary sex ratio in humans. Mothers under good environmental conditions are predicted to increase the birth rates of sons according to the Trivers-Willard hypothesis (TWH). This study analyzed the effects of ownership and non-ownership of dwellings on the sex ratio at birth (SRB) on a Ugandan sample. Our investigation included 438,640 mothers aged between 12 and 54 years. The overall average SRB was 0.5008. Mothers who live in owned dwellings gave increased births to sons (0.5019) compared to those who live in non-owned dwellings (0.458). Multivariate statistics revealed the strongest effects of dwelling ownership when controlling for demographic and social variables such as marital status, type of marriage, mothers' age, mothers' education, parity and others. The results are discussed in the framework of recent plausible models dealing with the adjustment of the sex ratio. We conclude that the aspect of dwelling status could represent an important socio-economic parameter in relation to SRB variations in humans if further studies are able to analyze it between different countries in a comparative way.

  16. Radon quantification in dwellings of different construction located in Pichincha Province

    International Nuclear Information System (INIS)

    Ayala, Maria Mercedes

    1992-01-01

    The desintegration of uranium-238 yields radon-222 present in most dwellings and buildings. Radon-222 gets into them, accumulatively, through floors and walls, domestic fuel-gas and drinking water pipes. Upon inhalation radon is cancer's causes, death-rate being about 5000 deaths per year in USA. This fact evidences the necessity to quantifying radon in dwellings in Ecuador. This research involves data from dwellings built up with different types of raw materials found spread in Pichincha province. The SSNTD method using a cellulose nitrate sensible film LR-115 was used for the research. The incidence of temperature, altitude, ventilation on the concentration gas Rn 222 were also subject of a qualitative study. Eventually, the results shows that the adobe dwellings and/or poorly ventilated dwellings produce maximum concentration of Rn 222 . Some cases show that ground floors have higher rate of Rn 222 than the first or second floors, meaning that the gas is also coming up from the ground. in any case the level of Rn 222 concentration is less than accepted limit 200 Bq/m 3 by UNCEAR only places, such as Mindo and Calderon, surpass the limit

  17. Radiation Protection for Radon in Dwellings - Consequences of the ICRP Publication 115

    International Nuclear Information System (INIS)

    Azzam, Jai T.; Breckow, J.; Grimm, V.; Grund, A.

    2013-01-01

    In the last decade several epidemiological studies on risk estimations due to exposure to radon in dwellings revealed higher risks to radon exposure than estimated previously. Thus, in ICRP Publication 115 (ICRP, 2011) a revised nominal probability coefficient for radon and its progeny-induced lung cancer was propounded. Based on the results of the exposure from residential studies and underground miners, the risk of lung cancer was estimated as 5x10 -4 per WLM (lifetime excess absolute risk, LEAR) and 8x10 -1 0 per Bqxh/m 3 , respectively. In the former Publication 65 (ICRP, 1993), the coefficient has been 2.83x10 -4 per WLM and 4x10 -1 0 per Bqxh/m 3 , respectively. Typical radon activity concentration in dwellings is about 60 Bq/m? in many parts of Europe. According to the ICRP Publication 65-dose coefficients, this concentration leads to a mean annual effective dose of 1.2 mSv. If the new nominal risk coefficient from ICRP Publication 115 is applied, the effective dose due to radon in dwellings increases to approximately 2.3 mSv per year. Referring the reference level of 10 mSv/a for radon exposure in dwellings in ICRP Publication 103 (ICRP, 2007) and based on the new recommendations in ICRP Publication 115, actions have to be taken to reduce the upper reference level for radon gas in dwellings from 600 Bq/m 3 to 300 Bq/m 3 .(author)

  18. Investigation of slip transfer across HCP grain boundaries with application to cold dwell facet fatigue

    International Nuclear Information System (INIS)

    Zheng, Zebang; Balint, Daniel S.; Dunne, Fionn P.E.

    2017-01-01

    This paper addresses the role of grain boundary slip transfer and thermally-activated discrete dislocation plasticity in the redistribution of grain boundary stresses during cold dwell fatigue in titanium alloys. Atomistic simulations have been utilised to calculate the grain boundary energies for titanium with respect to the misorientation angles. The grain boundary energies are utilised within a thermally-activated discrete dislocation plasticity model incorporating slip transfer controlled by energetic and grain boundary geometrical criteria. The model predicts the grain size effect on the flow strength in Ti alloys. Cold dwell fatigue behaviour in Ti-6242 alloy is investigated and it is shown that significant stress redistribution from soft to hard grains occurs during the stress dwell, which is observed both for grain boundaries for which slip transfer is permitted and inhibited. However, the grain boundary slip penetration is shown to lead to significantly higher hard-grain basal stresses near the grain boundary after dwell, thus exacerbating the load shedding stress compared to an impenetrable grain boundary. The key property controlling the dwell fatigue response is argued to remain the time constant associated with the thermal activation process for dislocation escape, but the slip penetrability is also important and exacerbates the load shedding. The inclusion of a macrozone does not significantly change the conclusions but does potentially lead to the possibility of a larger initial facet.

  19. Association between butyrylcholinesterase K variant and mild cognitive impairment in the Thai community-dwelling patients.

    Science.gov (United States)

    Pongthanaracht, Natsalil; Yanarojana, Somchai; Pinthong, Darawan; Unchern, Supeenun; Thithapandha, Amnuay; Assantachai, Prasert; Supavilai, Porntip

    2017-01-01

    To study the association of the butyrylcholinesterase K variant (BChE-K) and the plasma BChE activity with mild cognitive impairment (MCI) in Thai community-dwelling patients. One hundred patients diagnosed with MCI and 100 control subjects were recruited from the community-dwelling setting in Bangkok, Thailand. The genotype and allele distributions of the BChE-K were determined by polymerase chain reaction and subsequent DNA sequencing. The BChE activity was measured in plasma according to the Ellman's method. The BChE-K allele frequencies in the Thai community-dwelling patients were in accordance with other ethnics. The BChE-K allele frequency in the control subjects (12%) was higher than that of MCI patients (5.5%), suggesting a protective role of BChE-K for MCI in the Thai community-dwelling patients. The BChE-K homozygotes were significantly associated with lower BChE activity. Our results suggested that the BChE-K may be implicated as a protective factor for MCI in the Thai community-dwelling patients, although a further study with a large sample size is warranted to confirm this.

  20. Ownership of Dwelling Affects the Sex Ratio at Birth in Uganda

    Science.gov (United States)

    Wallner, Bernard; Fieder, Martin; Seidler, Horst

    2012-01-01

    Background Socio-economic conditions can affect the secondary sex ratio in humans. Mothers under good environmental conditions are predicted to increase the birth rates of sons according to the Trivers-Willard hypothesis (TWH). This study analyzed the effects of ownership and non-ownership of dwellings on the sex ratio at birth (SRB) on a Ugandan sample. Methodology/Principal Findings Our investigation included 438,640 mothers aged between 12 and 54 years. The overall average SRB was 0.5008. Mothers who live in owned dwellings gave increased births to sons (0.5019) compared to those who live in non-owned dwellings (0.458). Multivariate statistics revealed the strongest effects of dwelling ownership when controlling for demographic and social variables such as marital status, type of marriage, mothers’ age, mothers’ education, parity and others. Conclusions/Significance The results are discussed in the framework of recent plausible models dealing with the adjustment of the sex ratio. We conclude that the aspect of dwelling status could represent an important socio-economic parameter in relation to SRB variations in humans if further studies are able to analyze it between different countries in a comparative way. PMID:23284697

  1. The study of thoron and radon progeny concentrations in dwellings in Japan

    International Nuclear Information System (INIS)

    Guo, Q.; Shimo, M.; Ikebe, Y.

    1992-01-01

    Ths paper aims to make a comparison of different concentrations of thoron ( 220 Rn) progeny and radon ( 222 Rn) progeny in different kinds of dwellings. The potential alpha energy concentrations and the effective dose equivalent caused by thoron and radon progeny, respectively, have also been estimated. The measurements were carried out in 23 dwellings. The results indicate that thoron progeny concentrations indoors might be strongly affected by the type of building material used. Traditional Japanese buildings made with mud may have high thoron progeny concentrations of about 3.52 Bq.m -3 and a concentration ratio of thoron progeny to radon progeny of about 0.5, whereas in concrete dwellings thoron progeny concentrations are about 0.72 Bq.m -3 and the concentration ratio of thoron progeny to radon progeny is about 0.1. The annual effective dose equivalent of thoron progeny is 1.23 mSv in mud dwellings and 0.25 mSv in concrete dwellings. (author)

  2. Measurement of alpha radioactive air pollutants in fly ash brick dwellings

    International Nuclear Information System (INIS)

    Chauhan, R.P.; Kant, K.; Sharma, S.K.; Chakarvarti, S.K.

    2003-01-01

    The exposure of population to high concentrations of radon and its daughters for a long period lead to pathological effects like the respiratory functional changes and the occurrence of lung cancer. In the present study indoor radon monitoring has been carried out in fly ash brick dwellings in some villages/towns of district Faridabad, Haryana (India) using alpha sensitive LR-115 type II solid-state nuclear track detectors. The radon concentration levels in fly ash brick dwellings varied from 197 to 448 Bq m -3 with an average of 277±13 Bq m -3 while annual effective dose received by the occupants varied from 3.4 to 7.7 mSv with an average of 4.8±0.2 mSv. These results have been compared with the radon levels found in cemented and mud dwellings taken from our studies for these dwellings. These studies were also made simultaneously along with fly ash dwellings using same technique and in the same regions

  3. Indoor radon measurements in the dwellings of Punjab and Himachal Pradesh, India

    International Nuclear Information System (INIS)

    Rani, A.; Singh, S.; Duggal, V.

    2013-01-01

    The measurement of indoor radon concentrations were performed in the dwellings of the Punjab and Himachal Pradesh, India by using LR-115 type II Solid-State Nuclear Track Detectors in the bare mode. The annual average indoor radon concentrations in the dwellings are found to vary from 114 to 400 Bq m -3 with an average of 194 Bq m -3 . In ∼22 % of the dwellings the indoor radon activity concentration values lies in the range of action level (200-300 Bq m -3 ) and in ∼11 % of the dwellings above the upper limit of action level recommended by the International Commission on Radiological Protection (ICRP). The annual effective dose (AED) varies from 2.88 to 10.08 mSv with an average of 4.88 mSv. In most of the villages, the AED lies in the range of action level (3-10 mSv) recommended by the ICRP. The seasonal variation in indoor radon reveals the maximum values in winter and minimum in summer. The winter/summer ratio of indoor radon ranges from 1.15 to 1.62 with an average of 1.31. Analysis of ventilation conditions reveal that the indoor radon concentration values are more in poorly ventilated dwellings compared with the well-ventilated ones. (authors)

  4. Radon in dwellings in selected areas of Ireland

    International Nuclear Information System (INIS)

    Madden, J.S.; Duffy, J.T.; Mackin, G.A.; Colgan, P.A.; McGarry, A.T.

    1994-10-01

    This report presents and interprets the results of surveys of domestic radon concentrations carried out by the Radiological Protection Institute of Ireland between 1989 and 1992. Data from low-density monitoring surveys in counties Mayo, Galway (including the Aran Island of Inis Mor) and Clare and in north Kerry, in addition to more detailed surveys in Moycullen and Salthill in Co. Galway and south Cork city are presented. The highest seasonally-corrected radon level found in any of the 1755 dwellings surveyed was 2399 Bq/m 3 . This is twelve times the national Reference Level of 200 Bq/m 3 , and corresponds to an annual radiation dose to occupants of the house of 60 mSv, three times the maximum dose which radiation workers are allowed to receive under internationally-accepted standards. Statistical evaluation of the data has allowed classification of 10 km grid square areas on the basis of the predicted proportion of houses in each grid square with radon levels in excess of the national Reference Level, 200 Bq/m 3 . The most affected areas occur in counties Mayo and Galway, and to a lesser extent in south-east Cork city. In county Galway six grid squares are predicted to have more than 20% of houses with radon concentrations in excess of 200 Bq/m 3 . In the most affected grid square 30% of houses are predicted to have radon concentrations in excess of this level. It is important that householders in these areas be strongly encouraged to have the radon levels in their houses measured in order to identify the individual houses in which remedial measures are required. The risk associated with longterm exposure to radon has been calculated using the latest risk factor recommended by the International Commission on Radiological Protection. For average residents exposed to indoor radon concentrations of 200 Bq/m 3 the estimated lifetime risk of premature death from lung cancer, due to radon, is about 2%. This risk is a significant addition to the prevailing lifetime

  5. Acclimation responses to temperature vary with vertical stratification: implications for vulnerability of soil-dwelling species to extreme temperature events.

    Science.gov (United States)

    van Dooremalen, Coby; Berg, Matty P; Ellers, Jacintha

    2013-03-01

    The occurrence of summer heat waves is predicted to increase in amplitude and frequency in the near future, but the consequences of such extreme events are largely unknown, especially for belowground organisms. Soil organisms usually exhibit strong vertical stratification, resulting in more frequent exposure to extreme temperatures for surface-dwelling species than for soil-dwelling species. Therefore soil-dwelling species are expected to have poor acclimation responses to cope with temperature changes. We used five species of surface-dwelling and four species of soil-dwelling Collembola that habituate different depths in the soil. We tested for differences in tolerance to extreme temperatures after acclimation to warm and cold conditions. We also tested for differences in acclimation of the underlying physiology by looking at changes in membrane lipid composition. Chill coma recovery time, heat knockdown time and fatty acid profiles were determined after 1 week of acclimation to either 5 or 20 °C. Our results showed that surface-dwelling Collembola better maintained increased heat tolerance across acclimation temperatures, but no such response was found for cold tolerance. Concordantly, four of the five surface-dwelling Collembola showed up to fourfold changes in relative abundance of fatty acids after 1 week of acclimation, whereas none of the soil-dwelling species showed a significant adjustment in fatty acid composition. Strong physiological responses to temperature fluctuations may have become redundant in soil-dwelling species due to the relative thermal stability of their subterranean habitat. Based on the results of the four species studied, we expect that unless soil-dwelling species can temporarily retreat to avoid extreme temperatures, the predicted increase in heat waves under climatic change renders these soil-dwelling species more vulnerable to extinction than species with better physiological capabilities. Being able to act under a larger thermal

  6. The need to reconcile the habitability regulations with the acoustic rehabilitation of the minimum dwelling

    Directory of Open Access Journals (Sweden)

    F. Daumal

    2018-04-01

    Full Text Available There is no scientific literature on the interaction between the correction processes of acoustic pathologies and the habitability conditions in housing buildings. In this paper, the authors deduce the main interferences caused by the acoustic refurbishment of minimum dwellings in their habitability conditions from more than one hundred cases of legal claims in Catalonia. An analysis of the degree of interference is performed using as a case study the social housing of Aragon from the period 1939-1975 before and after a theoretical acoustic refurbishment. It is verified that the acoustic refurbishment solutions can have inopportune consequences in the habitability parameters of the dwellings. In addition, some of these dwellings before a hypothetical intervention are already deficient in this sense, raising the need for a revision of the habitability regulations for the minimum housing stock.

  7. System Design for Demand Controlled Ventilation in Multi-Family Dwellings

    DEFF Research Database (Denmark)

    Mortensen, Dorthe Kragsig; Nielsen, Toke Rammer

    2011-01-01

    This paper presents an investigation into solutions for the system design of a centralized DCV system in multi-family dwellings. The design focused on simple and inexpensive solutions. A cost benefit estimate showed that the initial cost of implementing DCV in a system with an efficient heat...... exchanger should not exceed 3400 DKK per dwelling in regions with weather conditions similar to the Danish climate. A design expected to fulfil this requirement was investigated in detail with regard to its electricity consumption by evaluation of different control strategies. Systems with variable airflows...... load reduces throttling and energy can be saved. A static pressure reset strategy was applied to a dwelling-specific DCV system where the airflow varied between three fixed rates. The system performance was evaluated for two diffusers. The annual electricity consumption was reduced by 20% to 30% when...

  8. Vitamin D and calcium supplementation prevents severe falls in elderly community-dwelling women

    DEFF Research Database (Denmark)

    Larsen, Erik Roj; Mosekilde, Leif; Foldspang, Anders

    2005-01-01

    Background and aims: We evaluated the effect of two programs for the prevention of falls leading to acute hospital admission in a population of elderly community-dwelling Danish residents. Methods: This was a factorial, pragmatic, intervention study. We included 9605 community-dwelling city......, or no intervention. Results: The Calcium and Vitamin D program was followed by 50.3% and the Environmental and Health Program by 46.4%. According to a multivariate analysis including age, marital status and intervention program, female residents who followed the Calcium and Vitamin D Program had a 12% risk reduction...... in severe falls (RR 0.88; 95% CI 0.79-0.98; pfalls leading to acute hospitalization in community-dwelling elderly females in a northern European region known to be deficient in vitamin D....

  9. Sound insulation between dwellings - Descriptors applied in building regulations in Europe

    DEFF Research Database (Denmark)

    Rasmussen, Birgit; Rindel, Jens Holger

    2010-01-01

    Regulatory sound insulation requirements for dwellings have existed since the 1950s in some countries and descriptors for evaluation of sound insulation have existed for nearly as long. However, the descriptors have changed considerably over time, from simple arithmetic averaging of frequency bands...... was carried out of legal sound insulation requirements in 24 countries in Europe. The comparison of requirements for sound insulation between dwellings revealed significant differences in descriptors as well as levels. This paper focuses on descriptors and summarizes the history of descriptors, the problems...... of the present situation and the benefits of consensus concerning descriptors for airborne and impact sound insulation between dwellings. The descriptors suitable for evaluation should be well-defined under practical situations in buildings and be measurable. Measurement results should be reproducible...

  10. Sound classification of dwellings – A diversity of national schemes in Europe

    DEFF Research Database (Denmark)

    Rasmussen, Birgit

    2011-01-01

    Sound classification schemes for dwellings exist in ten countries in Europe, typically prepared and published as national standards. The schemes define quality classes intended to reflect different levels of acoustical comfort. The main criteria concern airborne and impact sound insulation between...... dwellings, facade sound insulation and installation noise. This paper presents the sound classification schemes in Europe and compares the class criteria for sound insulation between dwellings. The schemes have been implemented and revised gradually since the early 1990s. However, due to lack...... constructions fulfilling different classes. The current variety of descriptors and classes also causes trade barriers. Thus, there is a need to harmonize characteristics of the schemes, and a European COST Action TU0901 "Integrating and Harmonizing Sound Insulation Aspects in Sustainable Urban Housing...

  11. Effects of Short-Term Training of Community-Dwelling Elderly with Modular Interactive Tiles

    DEFF Research Database (Denmark)

    Lund, Henrik Hautop; Jessen, Jari Due

    2014-01-01

    Objective: The objective of this study is to test for the increased mobility, agility, balancing, and general fitness of community-dwelling elderly individuals as a result of short-term training involving playing with modular interactive tiles (Entertainment Robotics, Odense, Denmark) at two...... individuals (63–95 years of age; mean, 83.2 years of age) were assessed in one intervention group without the use of a control group. The intervention group performed nine group sessions (1–1.5 hours each) of playful training with the modular interactive tiles over a 12-week period in two community activity...... community activity centers for the elderly. Three different tests from the Senior Fitness Test were used in order to test a variety of health parameters of the community-dwelling elderly, including those parameters related to fall prevention. Materials and Methods: Eighteen community-dwelling elderly...

  12. Energy statistics on one- and two-dwelling buildings in 1999

    International Nuclear Information System (INIS)

    2000-01-01

    The survey of energy statistics on one- and two-dwelling buildings in 1999 is based on a sample of 8264 buildings. The survey was carried out as a mail survey in January 2000. The non-response was 20 percent. The presentation provides data on energy consumption, number of one- and two-dwelling buildings, and heated floor spaces for the total population and for various subdivisions. More than one third of the one- and two-dwelling buildings are heated by electricity. About 17 percent are heated by a combination of firewood and electricity, and about 14 percent are heated by oil only. All of these heating types are decreasing, while heating by firewood/wood chips/pellets, heat pumps and distant heating are increasing

  13. Energy statistics for on one- and two-dwelling buildings in 2000

    International Nuclear Information System (INIS)

    2001-01-01

    The survey of energy statistics on one- and two-dwelling buildings in 2000 is based on a sample of 6531 buildings. The survey was carried out as a mail survey in January 2001. The non-response was 21 percent. The presentation provides data on energy consumption, number of one- and two-dwelling buildings, and heated floor spaces for the total population and for various subdivisions. More than one third of the one- and two-dwelling buildings are heated by electricity. About 18 percent are heated by a combination of firewood and electricity, and about 13 percent are heated by oil only. All of these heating types are decreasing, while heating by firewood/wood chips/pellets, heat pumps and distant heating are increasing

  14. An ELM-Based Approach for Estimating Train Dwell Time in Urban Rail Traffic

    Directory of Open Access Journals (Sweden)

    Wen-jun Chu

    2015-01-01

    Full Text Available Dwell time estimation plays an important role in the operation of urban rail system. On this specific problem, a range of models based on either polynomial regression or microsimulation have been proposed. However, the generalization performance of polynomial regression models is limited and the accuracy of existing microsimulation models is unstable. In this paper, a new dwell time estimation model based on extreme learning machine (ELM is proposed. The underlying factors that may affect urban rail dwell time are analyzed first. Then, the relationships among different factors are extracted and modeled by ELM neural networks, on basis of which an overall estimation model is proposed. At last, a set of observed data from Beijing subway is used to illustrate the proposed method and verify its overall performance.

  15. General relation between the group delay and dwell time in multicomponent electron systems

    Science.gov (United States)

    Zhai, Feng; Lu, Junqiang

    2016-10-01

    For multicomponent electron scattering states, we derive a general relation between the Wigner group delay and the Bohmian dwell time. It is found that the definition of group delay should account for the phase of the spinor wave functions of propagating modes. The difference between the group delay and dwell time comes from both the interference delay and the decaying modes. For barrier tunneling of helical electrons on a surface of topological insulators, our calculations including the trigonal-warping term show that the decaying modes can contribute greatly to the group delay. The derived relation between the group delay and the dwell time is helpful to unify the two definitions of tunneling time in a quite general situation.

  16. Analysis of dysphagia risk using the modified dysphagia risk assessment for the community-dwelling elderly.

    Science.gov (United States)

    Byeon, Haewon

    2016-09-01

    [Purpose] The elderly are susceptible to dysphagia, and complications can be minimized if high-risk groups are screened in early stages and properly rehabilitated. This study provides basic material for the early detection and prevention of dysphagia by investigating the risks of dysphagia and related factors in community-dwelling elders. [Subjects and Methods] Participants included 325 community-dwelling elderly people aged 65 or older. The modified dysphagia risk assessment for the community-dwelling elderly was used to assess dysphagia risk. [Results] Approximately 52.6% (n=171) of participants belonged to the high-risk group for dysphagia. After adjusting for confounding variables, people aged 75+, who used dentures, and who needed partial help in daily living had a significantly higher risk of dysphagia. [Conclusion] It is necessary to develop guidelines for dysphagia for early detection and rehabilitation.

  17. Separating the Influence of Environment from Stress Relaxation Effects on Dwell Fatigue Crack Growth

    Science.gov (United States)

    Telesman, Jack; Gabb, Tim; Ghosn, Louis J.

    2016-01-01

    Seven different microstructural variations of LSHR were produced by controlling the cooling rate and the subsequent aging and thermal exposure heat treatments. Through cyclic fatigue crack growth testing performed both in air and vacuum, it was established that four out of the seven LSHR heat treatments evaluated, possessed similar intrinsic environmental resistance to cyclic crack growth. For these four heat treatments, it was further shown that the large differences in dwell crack growth behavior which still persisted, were related to their measured stress relaxation behavior. The apparent differences in their dwell crack growth resistance were attributed to the inability of the standard linear elastic fracture mechanics (LEFM) stress intensity parameter to account for visco-plastic behavior. Crack tip stress relaxation controls the magnitude of the remaining local tensile stresses which are directly related to the measured dwell crack growth rates. It was hypothesized that the environmentally weakened grain boundary crack tip regions fail during the dwells when their strength is exceeded by the remaining local crack tip tensile stresses. It was shown that the classical creep crack growth mechanisms such as grain boundary sliding did not contribute to crack growth, but the local visco-plastic behavior still plays a very significant role by determining the crack tip tensile stress field which controls the dwell crack growth behavior. To account for the influence of the visco-plastic behavior on the crack tip stress field, an empirical modification to the LEFM stress intensity parameter, Kmax, was developed by incorporating into the formulation the remaining stress level concept as measured by simple stress relaxation tests. The newly proposed parameter, Ksrf, did an excellent job in correlating the dwell crack growth rates for the four heat treatments which were shown to have similar intrinsic environmental cyclic fatigue crack growth resistance.

  18. Primary energy consumption of the dwelling with solar hot water system and biomass boiler

    International Nuclear Information System (INIS)

    Berković-Šubić, Mihaela; Rauch, Martina; Dović, Damir; Andrassy, Mladen

    2014-01-01

    Highlights: • Methodology for determing delivered and primary energy is developed. • Conventional and solar hot water system are analyzed. • Influence of system components, heat losses and energy consumption is explored. • Savings when using solar system in delivered energy is 30% and in primary 75%. • Dwelling with higher Q H,nd has 60% shorter payback period. - Abstract: This paper presents a new methodology, based on the energy performance of buildings Directive related European norms. It is developed to overcome ambiguities and incompleteness of these standards in determining the delivered and primary energy. The available procedures from the present “Algorithm for determining the energy demands and efficiency of technical systems in buildings”, normally used for energy performance certification of buildings, also allow detailed analyzes of the influence of particular system components on the overall system energy efficiency. The calculation example is given for a Croatian reference dwelling, equipped with a solar hot water system, backed up with a biomass boiler for space heating and domestic hot water purposes as a part of the dwelling energy performance certification. Calculations were performed for two cases corresponding to different levels of the dwelling thermal insulation with an appropriate heating system capacity, in order to investigate the influence of the building heat losses on the system design and energy consumption. The results are compared against those obtained for the conventional system with a gas boiler in terms of the primary energy consumption as well as of investment and operating costs. These results indicate great reduction in both delivered and primary energy consumption when a solar system with biomass boiler is used instead of the conventional one. Higher savings are obtained in the case of the dwelling with higher energy need for space heating. Such dwellings also have a shorter payback period than the ones with

  19. Association between butyrylcholinesterase K variant and mild cognitive impairment in the Thai community-dwelling patients

    Directory of Open Access Journals (Sweden)

    Pongthanaracht N

    2017-05-01

    Full Text Available Natsalil Pongthanaracht,1 Somchai Yanarojana,1 Darawan Pinthong,1 Supeenun Unchern,1 Amnuay Thithapandha,1 Prasert Assantachai,2 Porntip Supavilai11Department of Pharmacology, Faculty of Science, 2Department of Preventive and Social Medicine, Faculty of Medicine Siriraj Hospital, Mahidol University, Bangkok, ThailandObjective: To study the association of the butyrylcholinesterase K variant (BChE-K and the plasma BChE activity with mild cognitive impairment (MCI in Thai community-dwelling patients.Methods: One hundred patients diagnosed with MCI and 100 control subjects were recruited from the community-dwelling setting in Bangkok, Thailand. The genotype and allele distributions of the BChE-K were determined by polymerase chain reaction and subsequent DNA sequencing. The BChE activity was measured in plasma according to the Ellman’s method.Results: The BChE-K allele frequencies in the Thai community-dwelling patients were in accordance with other ethnics. The BChE-K allele frequency in the control subjects (12% was higher than that of MCI patients (5.5%, suggesting a protective role of BChE-K for MCI in the Thai community-dwelling patients. The BChE-K homozygotes were significantly associated with lower BChE activity.Conclusion: Our results suggested that the BChE-K may be implicated as a protective factor for MCI in the Thai community-dwelling patients, although a further study with a large sample size is warranted to confirm this.Keywords: butyrylcholinesterase K variant, butyrylcholinesterase activity, mild cognitive impairment, Thai community-dwelling patients

  20. Community structure of grassland ground-dwelling arthropods along increasing soil salinities.

    Science.gov (United States)

    Pan, Chengchen; Feng, Qi; Liu, Jiliang; Li, Yulin; Li, Yuqiang; Yu, Xiaoya

    2018-03-01

    Ground-dwelling arthropod communities are influenced by numerous biotic and abiotic factors. Little is known, however, about the relative importance of vegetation structure and abiotic environmental factors on the patterns of ground-dwelling arthropod community across a wide range of soil salinities. Here, a field survey was conducted to assess the driving forces controlling ground-dwelling arthropod community in the salinized grasslands in the Hexi Corridor, Gansu Province, China. The data were analyzed by variance partitioning with canonical correspondence analysis (CCA). We found that vegetation structure and edaphic factors were at least of similar importance to the pattern of the whole ground-dwelling arthropod community. However, when all collected ground-dwelling arthropods were categorized into three trophic guilds (predators, herbivores, and decomposers), as these groups use different food sources, their populations were controlled by different driving forces. Predators and decomposers were mainly determined by biotic factors such as vegetation cover and aboveground plant biomass and herbivores by plant density and vegetation cover. Abiotic factors were also major determinants for the variation occurring in these guilds, with predators strongly affected by soil electrical conductivity (EC) and the content of fine particles (silt + clay, CS), herbivores by soil N:P, EC, and CS, and decomposers by soil EC and organic matter content (SOM). Since plant cover, density, and aboveground biomass can indicate resource availability, which are mainly constrained by soil N:P, EC, CS, and SOM, we consider that the ground-dwelling arthropod community in the salinized grasslands was mainly influenced by resource availability.

  1. Radon remediation of dwellings with suspended timber floors -case studies from the Building Research Establishment (UK)

    International Nuclear Information System (INIS)

    Welsh, P.; Stephen, R.

    1994-01-01

    Dwellings with suspended floors and high radon levels are proving difficult to remediate. This paper reports on the experience of the Building Research Establishment in dealing with such dwellings. Brief details of the remediation of 14 houses are given, and comparisons are made between the effectiveness of the different techniques adopted. Natural ventilation, mechanical supply ventilation and mechanical extract ventilation are three techniques that have been used successfully as radon remedial measures. Preliminary results suggest that supply ventilation is more effective than extract ventilation. (author)

  2. Larmor precession and dwell time of a relativistic particle scattered by a rectangular quantum well

    CERN Document Server

    Li, Z J; Liang, J J; Liang, J Q

    2003-01-01

    The Larmor precession of a relativistic neutral spin particle in a uniform constant magnetic field confined to the region of a one-dimensional rectangular potential well is investigated. The spin precession serves as a clock to measure the time spent by a quantum particle dwelling at a potential well. With the help of a general spin coherent state it is explicitly shown that the spin precession time is equal to the dwell time in the first-order approximation of the infinitesimal field limit. The comparison of the time in a potential well with that in free space shows apparent superluminality.

  3. Characterizing movement of ground-dwelling arthropods with a novel mark-capture method using fluorescent powder

    Science.gov (United States)

    Kayla I. Perry; Kimberly F. Wallin; John W. Wenzel; Daniel A. Herms

    2017-01-01

    A major knowledge gap exists in understanding dispersal potential of ground-dwelling arthropods, especially in forest ecosystems. Movement of the ground-dwelling arthropod community was quantified using a novel markcapture technique in which three different colored fluorescent powders in two separate mixtures were applied to the floor of a deciduous forest in...

  4. 24 CFR 203.16 - Certificate and contract regarding use of dwelling for transient or hotel purposes.

    Science.gov (United States)

    2010-04-01

    ... use of dwelling for transient or hotel purposes. 203.16 Section 203.16 Housing and Urban Development... use of dwelling for transient or hotel purposes. Every application filed with respect to insurance of... housing or any part thereof covered by the mortgage for transient or hotel purposes, together with the...

  5. 24 CFR 200.926e - Supplemental information for use with the CABO One and Two Family Dwelling Code.

    Science.gov (United States)

    2010-04-01

    ... with the CABO One and Two Family Dwelling Code. 200.926e Section 200.926e Housing and Urban Development... PROGRAMS Minimum Property Standards § 200.926e Supplemental information for use with the CABO One and Two... Criteria of the CABO One and Two Family Dwelling Code. (a) Roof live loads. Roof slope 3 in 12 or less: 20...

  6. The meaning of activities in the dwelling and residential environment : A structural approach in people-environment relations.

    NARCIS (Netherlands)

    Meesters, J.

    2009-01-01

    The dwelling is a central setting in people’s everyday life. People use their dwelling and residential environment for a large variety of activities and purposes. This study systematically relates activities, settings and meanings to improve the insight into people-environment relations. This is

  7. [Effects of cutting and reseeding on the ground-dwelling arthropod community in Caragana intermedia forest in desert steppe].

    Science.gov (United States)

    Liu, Ren-Tao; Chai, Yong-Qing; Yang, Xin-Guo; Song, Nai-Ping; Wang, Xin-Yun; Wang, Lei

    2013-01-01

    Taking a 25-year-old Caragana intermedia forest in desert steppe as test object, an investigation was conducted on the ground-dwelling arthropod community in cutting and no-cutting stands with and without reseeding, aimed to understand the effects of cutting, reseeding and their interaction on the individual number and group richness of ground-dwelling arthropod in C. intermedia forest. There were significantly lower number and richness of ground-dwelling arthropod in the open spaces than under the shrubs in the no-cutting and no-reseeding stands. Cutting, reseeding and both of them could significantly increase the number and richness of ground-dwelling arthropod in the open spaces, but not under the shrubs, compared with no cutting or reseeding. Consequently, there were no significant differences in the distribution of ground-dwelling arthropod in the open spaces and under the shrubs in the cutting, reseeding, or cutting and reseeding stands. Further, there was a similar buffer effect between cutting and reseeding on the ground-dwelling arthropod. No significant differences were observed in the ground-dwelling arthropod distribution, between cutting stand and reseeding stand, between cutting stand and cutting and reseeding stand, and between reseeding stand and cutting and reseeding stand. It was suggested that cutting, reseeding, or both of them could significantly improve the ground-dwelling arthropod diversity especially in the open spaces, being beneficial for the restoration of degraded grassland ecosystem and the rational management on artificial C. intermedia forest in desert steppe.

  8. 12 CFR 226.36 - Prohibited acts or practices in connection with credit secured by a consumer's principal dwelling.

    Science.gov (United States)

    2010-01-01

    ... credit secured by a consumer's principal dwelling. 226.36 Section 226.36 Banks and Banking FEDERAL... with credit secured by a consumer's principal dwelling. (a) Mortgage broker defined. For purposes of...) Misrepresentation of value of consumer's dwelling—(1) Coercion of appraiser. In connection with a consumer credit...

  9. 25 CFR 256.25 - Is my Federal government-assisted dwelling eligible for services under the Housing Improvement...

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Is my Federal government-assisted dwelling eligible for services under the Housing Improvement Program? 256.25 Section 256.25 Indians BUREAU OF INDIAN AFFAIRS... dwelling eligible for services under the Housing Improvement Program? Yes. You may receive services under...

  10. Systematic Literature Review of Randomized Control Trials Assessing the Effectiveness of Nutrition Interventions in Community-Dwelling Older Adults

    Science.gov (United States)

    Bandayrel, Kristofer; Wong, Sharon

    2011-01-01

    Objective: Nutrition interventions may play an important role in maintaining the health and quality of life in community-dwelling older adults. To the authors' knowledge, no systematic literature review has been conducted on the effectiveness of nutrition interventions in the community-dwelling older adult population. Design: Systematic literature…

  11. Comparison between different methods for inspection of wooden poles in service in electricity distribution networks; Comparacao entre diferentes metodos de inspecao de postes de madeira em servico em redes de distribuicao de energia

    Energy Technology Data Exchange (ETDEWEB)

    Cruz, M.A.O.; Pires, M.; Dedavid, B.A.; Vidor, F.L.R.; Oliveira, W.S.; Abruzzi, R.C. [Pontificia Univ. Catolica do Rio Grande do Sul (PUC-RS), Porto Alegre, RS (Brazil). Programa de Pos-Graduacao em Engenharia e Tecnologia de Materiais (PGETEMA)], Email: mpires@pucrs.br

    2010-07-01

    The pole is the main support structure of the electric network and should be inspected regularly to ensure system security. The aim of this study is to compare traditional and instrumental inspection methods of the wooden poles in service in AES Sul power distribution network (Montenegro, RS). The inspections were conducted in about 180 poles in two measurement campaigns (2001 and 2010). The procedure was based on the traditional inspection (visual inspection, percussion and effort lateral) and instrumental method based on Polux equipment that measures the penetration resistance and moisture content of wood. The results were compared in search of assertiveness of the methods used to subsidize the standardization of inspection procedures. (author)

  12. Sound classification of dwellings in the Nordic countries – Differences and similarities between the five national schemes

    DEFF Research Database (Denmark)

    Rasmussen, Birgit

    2012-01-01

    having several similarities. In 2012, status is that number and denotations of classes for dwellings are identical in the Nordic countries, but the structures of the standards and several details are quite different. Also the issues dealt with are different. Examples of differences are sound insulation...... for classification of such buildings. This paper presents and compares the main class criteria for sound insulation of dwellings and summarizes differences and similarities in criteria and in structures of standards. Classification schemes for dwellings also exist in several other countries in Europe......In all five Nordic countries, sound classification schemes for dwellings have been published in national standards being implemented and revised gradually since the late 1990s. The national classification criteria for dwellings originate from a common Nordic INSTA-B proposal from the 1990s, thus...

  13. Radiation survey of dwellings in Cane Valley, Arizona and Utah, for use of uranium mill tailings. Final technical note

    International Nuclear Information System (INIS)

    Hans, J.M. Jr; Douglas, R.L.

    1975-08-01

    A radiation survey was conducted in the Cane Valley area of Monument Valley, on the Navajo Reservation, to identify dwellings in which uranium mill tailings had been used and to assess the resulting radiation exposures. Sixteen of the 37 dwellings surveyed were found to have tailings and/or uranium ore used in their construction. Tailings were used in concrete floors, exterior stucco, mortar for stone footings, cement floor patchings, and inside as cement 'plaster'. Uranium ore was found in footings, walls, and in one fireplace. Other structures, not used as dwellings, were also identified as having tailings and ore use. Gamma ray exposure rates were measured inside dwellings and structures identified as having tailings and/or ore used in their construction. Indoor radon progeny samples were collected in occupied dwellings where practical

  14. Relationships between air-tightness and its influencing factors of post-2006 new-build dwellings in the UK

    Energy Technology Data Exchange (ETDEWEB)

    Pan, Wei [School of Architecture, Design and Environment, University of Plymouth, Drake Circus, Plymouth, PL4 8AA (United Kingdom)

    2010-11-15

    Addressing air leakage of dwellings is important to improving energy efficiency and thermal comfort. This paper reports on the air permeability test results of 287 post-2006 new-build dwellings in the UK. The paper explores the relationships between air-tightness and its influencing factors including build method, dwelling type, management context, design target, season, number of significant penetrations, and envelope and floor area. One-way ANOVA analysis was utilised to compare means of air permeability in relation to the individual factors, and two- and three-way ANOVA analyses were applied for examining the interactions between them. The air-tightness of the dwellings averaged 5.97 m{sup 3}/(h m{sup 2}) at 50 Pa, which has improved from UK historic data. Dwellings built using precast concrete panels were significantly air-tighter than those built using timber frame, whilst those masonry and reinforced concrete frame dwellings were most leaky. Greater extent of innovative practice and 'self-build' procurement led to achieving superior air-tightness. Interaction was observed between 'build method' and 'dwelling type' and between 'dwelling type' and 'management context'. A modest positive correlation was noticed between air permeability and design target, which became weak in relation to the number of significant penetrations and envelope area. Applying the linear regression technique a predictive model is developed for estimating air permeability of dwellings. This model integrates the influencing factors and their significant interactions. The findings should contribute to future research in predicting impacts of controlling the influencing factors on achieving air-tightness of dwellings more consistently. (author)

  15. 24 CFR 1000.162 - How will a recipient know that non-dwelling structures assisted under the IHBG program meet the...

    Science.gov (United States)

    2010-04-01

    ...-dwelling structures assisted under the IHBG program meet the requirements of 1000.160? 1000.162 Section... that non-dwelling structures assisted under the IHBG program meet the requirements of 1000.160? (a) The... non-dwelling structure meets the limitation requirements of § 1000.160. If the recipient develops...

  16. 25 CFR 256.17 - What will the servicing housing office do to identify what work is to be done on my dwelling?

    Science.gov (United States)

    2010-04-01

    ... what work is to be done on my dwelling? 256.17 Section 256.17 Indians BUREAU OF INDIAN AFFAIRS... office do to identify what work is to be done on my dwelling? (a) First, a trained and qualified representative of your servicing housing office must visit your dwelling to identify what repairs or renovation...

  17. 25 CFR 256.23 - How will I be advised that the repair, renovation or replacement of my dwelling has been completed?

    Science.gov (United States)

    2010-04-01

    ... replacement of my dwelling has been completed? 256.23 Section 256.23 Indians BUREAU OF INDIAN AFFAIRS..., renovation or replacement of my dwelling has been completed? The servicing housing office will advise you, in... final walk-through of the dwelling with your servicing housing office representative. You will be...

  18. Africa’s wooden elephant

    DEFF Research Database (Denmark)

    Gebauer, Jens; Adam, Yahia O.; Cuni Sanchez, Aida

    2016-01-01

    Wild edible fruits hold great potential for improving human diets, especially in agricultural societies of the developing world. In Africa, a well-known supplier of such fruits is the baobab (Adansonia digitata L., Malvaceae), one of the most remarkable trees of the world. Several studies in diff...

  19. Wave content of wooden floors

    NARCIS (Netherlands)

    Pagan Munoz, R.; Recuero Lopez, M.; Kroop, W.

    2014-01-01

    During the last decades, new building techniques based on lightweight systems have been developed and today they are frequently used in many countries. Nowadays, these systems present some disadvantages when compared with the traditional building technologies, since most of the acoustic regulations

  20. Optimisation of Heating Energy Demand and Thermal Comfort of a Courtyard-Atrium Dwelling

    NARCIS (Netherlands)

    Taleghani, M.; Tenpierik, M.; Dobbelsteen, A.

    2013-01-01

    In the light of energy reduction, transitional spaces are recognised as ways to receive natural light and fresh air. This paper analyses the effects of courtyard and atrium as two types of transitional spaces on heating demand and thermal comfort of a Dutch low-rise dwelling, at current and future