WorldWideScience

Sample records for pre-law coal surface-mined

  1. Ecological relationships of fauna and flora on a pre-law coal surface-mined area in Perry County, Illinois

    Energy Technology Data Exchange (ETDEWEB)

    Smith, J.R.

    1986-01-01

    Pre-law coal surface-mined lands in Pyramid State Park, Perry County, Illinois, were examined 1976-1980 to determine changes in fauna and flora from that on the area in 1954-1960. Vegetative development on naturally revegetated spoils reflected diverse habitat conditions with interspersion of cover types; some of oldest spoils displayed inhibited succession while others exhibited early flood plain forest development. Ground and overstory species richness and overstory density increased since mid 1950's and ground cover domination by therophytes in 1954-1956 shifted to phanerophytes and hemicryptophytes in 1976-1978. Thirty vegetative compositional and structural parameters indicated that ground cover was limited by subcanopy rather than large scattered trees. Aquatic vegetation communities developed but hydrosphere was not well represented; emergent vegetation was limited by morphology of basins. Although isolated sites exhibited deleterious conditions, vegetation was not generally inhibited by physico-chemical factors. The 29 mammals reflected an increase in species richness. Abundance of early successional forms decreased while occupants of shrub/forest increased. Past habitat enhancement influenced wildlife distribution; and plantations attracted woodland fauna. Leveled spoil crests, valleys and clearings with fescue retarded succession and provided open areas and edges for others.

  2. Rational Use of Land Resource During the Implementation of Transportless System of Coal Strata Surface Mining

    Science.gov (United States)

    Gvozdkova, T.; Tyulenev, M.; Zhironkin, S.; Trifonov, V. A.; Osipov, Yu M.

    2017-01-01

    Surface mining and open pits engineering affect the environment in a very negative way. Among other pollutions that open pits make during mineral deposits exploiting, particular problem is the landscape changing. Along with converting the land into pits, surface mining is connected with pilling dumps that occupy large ground. The article describes an analysis of transportless methods of several coal seams strata surface mining, applied for open pits of South Kuzbass coal enterprises (Western Siberia, Russia). To improve land-use management of open pit mining enterprises, the characteristics of transportless technological schemes for several coal seams strata surface mining are highlighted and observed. These characteristics help to systematize transportless open mining technologies using common criteria that characterize structure of the bottom part of a strata and internal dumping schemes. The schemes of transportless systems of coal strata surface mining implemented in South Kuzbass are given.

  3. Extent of Abandoned Underground Coal Mines and Surface Mines in the Boulder-Weld Coal Field (friminedu)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This file is a digital polygon representation of the areal extent of abandoned underground coal mines and surface mines in the Boulder-Weld coal field, Denver Basin,...

  4. Atlas of wetlands in the principal coal surface mining region of western Kentucky. Reference report

    Energy Technology Data Exchange (ETDEWEB)

    Mitsch, W.J.; Taylor, J.R.; Benson, K.B.; Hill, P.L. Jr.

    1983-07-01

    This reference document provides information on the location of wetlands in the Western Kentucky Region where coal surface mining is an important industry, principally Muhlenberg, Hopkins, and Ohio Counties. The wetlands and fish and wildlife data are presented on U. S. Geologic Survey 1:24,000 scale Quad maps and tables. The discussion focuses on historical information on the wetlands, occurrence of selected species in various kinds of wetlands, and environmentally important factors affecting the biota through surface mining activities.

  5. Fifth symposium on surface mining and reclamation. NCA/BCR coal conference and Expo IV

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-01-01

    The Fifth Symposium on Surface Mining and Reclamation, sponsored by the National Coal Association and Bituminous Coal Research, Inc., was held at the Kentucky Fair and Exposition Center, Louisville, Kentucky, October 18-20, 1977. Twenty-six papers from the proceedings have been entered individually into EDB and ERA. Topics covered include spoil bank revegetation, use of aerial photography, reclamation for row crop production, hydrology, computer programs related to this work, subirrigated alluvial valley floors, reclamation on steep slopes, mountain top removal, surface mine road design, successional processes involved in reclamation, land use planning, etc. (LTN)

  6. Summary of fish and wildlife information needs to surface mine coal in the United States. Part 3. A handbook for meeting fish and wildlife information needs to surface mine coal: OSM Region V. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Hinkle, C.R.; Ambrose, R.E.; Wenzel, C.R.

    1981-02-01

    This report contains information to assist in protecting, enhancing, and reducing impacts to fish and wildlife resources during surface mining of coal. It gives information on the premining, mining, reclamation and compliance phases of surface mining. This volume is specifically for the states of Washington, Idaho, Montana, North Dakota, South Dakota, Wyoming, Oregon, California, Nevada, Utah, Colorado, Arizona and New Mexico.

  7. Identifying woody vegetation on coal surface mines using phenological indicators with multitemporal Landsat imagery

    Science.gov (United States)

    Oliphant, A. J.; Li, J.; Wynne, R. H.; Donovan, P. F.; Zipper, C. E.

    2014-11-01

    Surface mining for coal has disturbed large land areas in the Appalachian Mountains. Better information on mined lands' ecosystem recovery status is necessary for effective environmental management in mining-impacted regions. Because record quality varies between state mining agencies and much mining occurred prior to widespread use of geospatial technologies, accurate maps of mining extents, durations, and land cover effects are often not available. Landsat data are well suited to mapping and characterizing land cover and forest recovery on former coal surface mines. Past mine reclamation techniques have often failed to restore premining forest vegetation but natural processes may enable native forests to re-establish on mined areas with time. However, the invasive species autumn olive (Elaeagnus umbellate) is proliferating widely on former coal surface mines, often inhibiting reestablishment of native forests. Autumn olive outcompetes native vegetation because it fixes atmospheric nitrogen and benefits from a longer growing season than native deciduous trees. This longer growing season, along with Landsat 8's high signal to noise ratio, has enabled species-level classification of autumn olive using multitemporal Landsat 8 data at accuracy levels usually only obtainable using higher spatial or spectral resolution sensors. We have used classification and regression tree (CART®) and support vector machine (SVM) to classify five counties in the coal mining region of Virginia for presence and absence of autumn olive. The best model found was a CART® model with 36 nodes which had an overall accuracy of 84% and kappa of 0.68. Autumn olive had conditional kappa of 0.65 and a producers and users accuracy of 86% and 83% respectively. The best SVM model used a second order polynomial kernel and had an overall accuracy of 77%, an overall kappa of 0.54 and a producers and users accuracy of 60% and 90% respectively.

  8. Wetlands and coal surface mining: a management handbook with particular reference to the Illinois Basin of the Eastern Interior Coal Region. Research report September 1983-September 1984

    Energy Technology Data Exchange (ETDEWEB)

    Cardamone, M.A.; Taylor, J.R.; Mitsch, W.J.

    1984-09-01

    The report outlines management operation for protecting wetlands during the surface mining of coal, particularly for the portion of the Eastern Interior Coal Region that is found in Kentucky, Indiana, and Illinois. The main issues addressed in this manual include: basic information for identifying wetlands; wetland values, and methods used for values assessment; how coal mining can affect wetlands; a method for addressing wetland protection needs and some prevention and mitigation actions; reclamation alternatives, including wetland restoration and the creation of wetlands as alternative ecosystems on mined areas; and general legal and regulatory information concerning wetland protection and surface mining of coal.

  9. Nitrogen fixation (acetylene reduction) by annual winter legumes on a coal surface mine

    Energy Technology Data Exchange (ETDEWEB)

    Gabrielson, F.C.

    1982-01-01

    The winter annuals, crimson clover, rose clover, subterranean clover and hairy vetch, were evaluated for their ability to fix nitrogen on coal surface mine substrates by measuring their ability to reduce acetylene to ethylene. The effects of fertilizer, Abruzzi ryegrass, Kentucky 31 fescue grass and a phytotoxic plant Chenopodium album on nitrogen fixation was also assessed. Crimson clover was recommended as the best legume to use on topsoil and shale in the South. Hairy vetch gave good results on shale and subterranean clover did well on topsoil. The use of these species for revegetation is discussed. Overall, no correlation between substrate pH and ethylene levels was found and effects of substrate depended upon the legume species. Super phosphate fertilizer supported less nitrogen fixation than 13-13-13. Abruzzi ryegrass in some unknown way inhibited plant density and nitrogen fixation by legumes but not by free living substrate micro-organisms. Shale from under dead Chenopodium plants in both field and greenhouse experiments did not inhibit nitrogen fixation. 11 references, 7 tables.

  10. Nitrogen fixation (Acetylene Reduction) by annual winter legumes on a coal surface mine

    Energy Technology Data Exchange (ETDEWEB)

    Gabrielson, F.C.

    1982-01-01

    The winter annuals, crimson clover, rose clover, subterranean clover and hairy vetch, were evaluated for nitrogen fixing capacity on coal surface mine substrates by measuring their ability to reduce acetylene to ethylene. The effects of fertilizer, Abruzzi rye, Kentucky 31 fescue grass and a phytotoxic plant Chenopodium album on nitrogen fixation were also assessed. Crimson clover was recommended as the best legume to use on topsoil and shale in the south. Hairy vetch gave good results on shale and subterranean clover did well on topsoil. The use of these species for revegetation is discussed. Overall, no correlation between substrate pH and ethylene levels was found and effects of substrate depended upon the legume species. Super phosphate fertilizer supported less nitrogen fixation than 13-13-13. Abruzzi rye in some unknown way inhibited plant density and nitrogen fixation by legumes but not by free living substrate micro-organisms. Shale from under dead Chenopodium plants in both field and greehouse experiments did not inhibit nitrogen fixation. 7 tables.

  11. Geochemistry and Modes of Occurrence of Hazardous Trace Elements in the No.11 Coal Seam, Antaibao Surface Mine, Shanxi Province

    Institute of Scientific and Technical Information of China (English)

    SONG Dangyu; QIN Yong; WANG Wenfeng; ZHANG Junying; ZHENG Chuguang

    2007-01-01

    Concentrations of seventeen hazardous trace elements including As, Pb, Hg, Se, Cd, Cr, Co,Mo, Mn, Ni, U, V, Th, Be, Sb, Br and Zn in the No.11 coal seam, Antaibao surface mine, Shanxi Province were determined using Instrumental Neutron Activation Analysis (INAA), Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Cold-Vapor Atomic Absorption Spectrometry (CV-AAS) and Graphite Furnace Atomic Absorption Spectrometry (GF-AAS).Comparisons with average concentrations of trace elements in Chinese coal show that the concentrations of Hg and Cd in the No. 11 coal seam, Antaibao surface mine are much higher. They may be harmful to the environment in the process of utilization. The variations of the trace elements contents and pyritic sulfur in vertical section indicated that: (a) the concentrations of As, Pb, Mn, and pyritic sulfur decrease from roof to floor; (b) the concentrations of Cr, Zn and Mo are higher in roof,floor and lower in coal seam; (c) the concentration of Br, Sb, and Hg are higher in coal seam and lower in roof and floor; (d) the concentrations of Mo, V, Th and Al vary consistently with the ash yield.Cluster analysis of trace elements, pyritic sulfur, ash yield and major elements, such as Al, Fe, P, Ca shows that: (a) pyritic sulfur, Fe, As, Mn, Ni, Be are closely associated and reflect the influence of pyrite; (b) Mo, Se, Pb, Cr, Th, Co, Ca and Al are related to clay mineral, which is the main source of ash; (c) U, Zn, V, Na, P maybe controlled by phosphate or halite; (d) Hg, Br, Sb and Cd may be mainly organic-associated elements which fall outside the three main groups. The concentration distribution characteristics of trace elements in coal seam and the cluster analysis of major and trace elements showed that the contents of trace elements in the No. 11 coal seam, Antaibao surface mine, are mainly controlled by detrital input and migration from roof and floor.

  12. Land and natural resource information and some potential environmental effects of surface mining of coal in the Gillette area, Wyoming

    Science.gov (United States)

    Keefer, William Richard; Hadley, R.F.

    1976-01-01

    Campbell County, along the east margin of the Powder River Basin in northeastern Wyoming, contains more coal than any other county in the United States. The principal deposit is the Wyodak-Anderson coal bed. The bed is 50-100 feet (15-30 meters) thick over large areas, lies less than 200 feet (60 meters) deep in a north-south trending strip nearly 100 miles (161 kilometers) long and 2-3 miles (3-5 kilometers) wide, and contains an estimated 15 billion tons (13.6 billion metric tons) of sub-bituminous, low-sulfur coal that is presently considered to be accessible to surface mining. Extensive mining of this deposit has the potential for causing a variety of environmental impacts and has been a matter of much public concern and debate in recent years. An integrated program of geologic, hydrologic, geochemical, and related studies by the U.S. Geological Survey in central Campbell County provides basic information about the land and its resources, including (1) characteristics of the landscape, (2) properties of rocks and surface materials, (3) depth and thickness of coal, (4) streamflow, (5) depth to ground water, (6) quality of ground water, (7) sediment yield, (8) concentrations of trace elements in soils, rocks, coal, vegetation, and water, and (9) current land use. The data are used to analyze and predict some of the potential environmental effects of surface mining, such as the extent of land disturbance, nature and degree of landscape modification, and disruption of surface-water and ground-water systems. Advance knowledge and understanding of these and other problems are useful in the planning and regulation of future leasing, mining, reclamation, and related activities.

  13. Exploitation of raw materials from the overburden of the Klettwitz brown coal surface mine

    Energy Technology Data Exchange (ETDEWEB)

    Anke, S.; Knuth, M.

    1982-12-01

    The paper discusses mining of clay for the ceramic industry from the overburden of the Klettwitz mine. The clay fulfills the TGL 29317 quality standard for crude ceramic products; the clay layer in the surface mine has an average thickness of 4.7 m. Clay reserves of the mine will last 25 to 30 years for the operation of a new clinker brick factory. Mining losses of 20% of reserves are taken into account. Clay reserves were calculated without the first 0.3 m from the top and bottom of the layer. The clay is mined with a bucket wheel excavator and transported by train to an open air storage yard. The clay stock pile is 13 m high. Liquefaction of the clay occurs after rain causing flows up to 40 m long, thus partially reducing the dump height to between 5 and 7 m. Clay quality from the mine varies; clay blending at the storage yard is therefore required. Various details on legal obligations of clay mining as a measure of complex utilization of resources in surface mines, as well as details on clay delivery contracts made by the mine with the brick factory are outlined. (In German)

  14. Feasibility study of highwall mining in north surface mine of Yima Coal Corporation,China

    Institute of Scientific and Technical Information of China (English)

    Guoming Cheng; Sijing Wang; Meifeng Cai

    2003-01-01

    Yima Coal Corporation is considering to adopt highwall mining method with auger machine to recover coal from north surface pit that has reached final highwall position. The major geomechanical issues associated with auger mining are highwall and pillar stability. Based on the field investigation and laboratory test results of mechanical parameters, numerical modeling is carried out to assess the stability of highwall and pillar. Field measurements of highwall deformation have been used to validate and ensure the confidence for the development of realistic models. The results of numerical modeling show that the mining method is feasible for mining the seam of 10 m thickness in north surface coal mine.

  15. Restoring Forests and Associated Ecosystem Services on Appalachian Coal Surface Mines

    Science.gov (United States)

    Zipper, Carl E.; Burger, James A.; Skousen, Jeffrey G.; Angel, Patrick N.; Barton, Christopher D.; Davis, Victor; Franklin, Jennifer A.

    2011-05-01

    Surface coal mining in Appalachia has caused extensive replacement of forest with non-forested land cover, much of which is unmanaged and unproductive. Although forested ecosystems are valued by society for both marketable products and ecosystem services, forests have not been restored on most Appalachian mined lands because traditional reclamation practices, encouraged by regulatory policies, created conditions poorly suited for reforestation. Reclamation scientists have studied productive forests growing on older mine sites, established forest vegetation experimentally on recent mines, and identified mine reclamation practices that encourage forest vegetation re-establishment. Based on these findings, they developed a Forestry Reclamation Approach (FRA) that can be employed by coal mining firms to restore forest vegetation. Scientists and mine regulators, working collaboratively, have communicated the FRA to the coal industry and to regulatory enforcement personnel. Today, the FRA is used routinely by many coal mining firms, and thousands of mined hectares have been reclaimed to restore productive mine soils and planted with native forest trees. Reclamation of coal mines using the FRA is expected to restore these lands' capabilities to provide forest-based ecosystem services, such as wood production, atmospheric carbon sequestration, wildlife habitat, watershed protection, and water quality protection to a greater extent than conventional reclamation practices.

  16. Landscape transformation of surface-mined areas in North Bohemian coal basin

    Energy Technology Data Exchange (ETDEWEB)

    Lorencova, H.; Kaspar, J. [MUS Coal Mining Company j.s.c., Most (Czech Republic)

    1999-07-01

    Northern Bohemia is the area worst affected by opencast brown coal mining but also the area with good reclamation of damaged land. MUS Coal Mining Company focuses reclaiming activity on restoration of forests, parks or water landscapes to agricultural use. This paper presents two case studies of post-mining activities. First, at the Most opencast mine after early closure, where a lake of 325 ha will be created. Secondly, reclamation of Velebudice overburden waste dump where the main reclamation objective was to establish a hippodrome (82 ha). 2 figs., 1 tab.

  17. Geochemical processes in ground water resulting from surface mining of coal at the Big Sky and West Decker Mine areas, southeastern Montana

    Science.gov (United States)

    Clark, D.W.

    1995-01-01

    A potential hydrologic effect of surface mining of coal in southeastern Montana is a change in the quality of ground water. Dissolved-solids concen- trations in water in spoils aquifers generally are larger than concentrations in water in the coal aquifers they replaced; however, laboratory experiments have indicated that concentrations can decrease if ground water flows from coal-mine spoils to coal. This study was conducted to determine if decreases in concentrations occur onsite and, if so, which geochemical processes caused the decreases. Solid-phase core samples of spoils, unmined over- burden, and coal, and ground-water samples were collected from 16 observation wells at two mine areas. In the Big Sky Mine area, changes in ground- water chemistry along a flow path from an upgradient coal aquifer to a spoils aquifer probably were a result of dedolomitization. Dissolved-solids concentrations were unchanged as water flowed from a spoils aquifer to a downgradient coal aquifer. In the West Decker Mine area, dissolved-solids concentrations apparently decreased from about 4,100 to 2,100 milligrams per liter as water moved along an inferred flow path from a spoils aquifer to a downgradient coal aquifer. Geochemical models were used to analyze changes in water chemistry on the basis of results of solid-phase and aqueous geochemical characteristics. Geochemical processes postulated to result in the apparent decrease in dissolved-solids concentrations along this inferred flow path include bacterial reduction of sulfate, reverse cation exchange within the coal, and precipitation of carbonate and iron-sulfide minerals.

  18. Development and Application of Blast Casting Technique in Large-Scale Surface Mines: A Case Study of Heidaigou Surface Coal Mine in China

    Directory of Open Access Journals (Sweden)

    Li Ma

    2016-01-01

    Full Text Available Blast casting is a high-efficiency technique applied in surface mines for overburden removal and results in stripping cost savings. According to ballistic theory and center-of-mass frame basic movement principles, key factors influencing blast casting effect were analyzed, which include bench height and mining panel width, inclined angle of blast holes, explosive unit consumption (EUC, delay-time interval, presplitting, and blast hole pattern parameters. An intelligent design software was developed for obtaining better breaking and casting effect, and the error rates predicted with actual result can be controlled with 10%. Blast casting technique was successfully applied in Heidaigou Surface Coal Mine (HSCM with more than 34% of material casted into the inner dump. A ramp ditch was set within the middle inner dump for coal transportation. The procedure of stripping and excavating was implemented separately and alternately in the two sections around the middle ramp ditch. An unconstrained-nonlinear model was deduced for optimizing the shift distance of the middle ramp. The calculation results show that optimum shift distance of HSCM is 480 m, and the middle ditch should be shifted after 6 blast casting mining panels being stripped.

  19. SURFACE MINE PLANNING OPTIMIZATION BY GOAL PROGRAMMING

    Institute of Scientific and Technical Information of China (English)

    陈意平; 张幼蒂

    1991-01-01

    This paper introduced an approach to surface mine planning optimization-Goal Programming.The multiobjective[0-1] model has been built and the software has been developed.The method has been applied to a huge surface coal mine,the result of which shows that it is effective and feasible.

  20. Reforesting unused surface mined lands by replanting with native trees

    Science.gov (United States)

    Patrick N. Angel; James A. Burger; Carl E. Zipper; Scott Eggerud

    2012-01-01

    More than 600,000 ha (1.5 million ac) of mostly forested land in the Appalachian region were surface mined for coal under the Surface Mining Control and Reclamation Act. Today, these lands are largely unmanaged and covered with persistent herbaceous species, such as fescue (Festuca spp.) and sericea lespedeza (Lespedeza cuneata [Dum. Cours.] G. Don,) and a mix of...

  1. Weathering behaviour of overburden-coal ash blending in relation to overburden management for acid mine drainage prevention in coal surface mine

    Energy Technology Data Exchange (ETDEWEB)

    Gautama, R.S.; Kusuma, G.J.; Lestari, I.; Anggana, R.P. [Bandung Inst. Teknologi (Indonesia). Dept. of Mining Engineering, Faculty of Mining and Petroleum Engineering

    2010-07-01

    Potentially acid forming (PAF) materials are encapsulated with non-acid forming materials (NAF) in order to prevent acid mine drainage (AMD) in surface coal mines. NAF compaction techniques with fly and bottom ashes from coal-fired power plants are used in mines with limited amounts of NAF materials. This study investigated the weathering behaviour of blended overburden and coal combustion ash in laboratory conditions. Free draining column leach tests were conducted on different blending schemes. The weathering process was simulated by spraying the samples with de-ionized water once per day. The leachates were then analyzed using X-ray diffraction and fluorescence analyses in order to identify the mineral composition of the samples over a 14 week period. Results of the study indicated that the weathering process plays a significant role in controlling infiltration rates, and may increase the capability of capping materials to prevent infiltration into PAF materials. Fly- and bottom-ash additions improved the performance of the encapsulation materials. 3 refs., 4 tabs., 2 figs.

  2. Range of drainage effect of surface mines

    Energy Technology Data Exchange (ETDEWEB)

    Sozanski, J.

    1978-03-01

    This paper discusses methods of calculating the range of effects of water drainage from surface coal mines and other surface mines. It is suggested that methods based on test pumping (water drainage) are time consuming, and the results can be distorted by atmospheric factors such as rain fall or dry period. So-called empirical formulae produce results which are often incorrect. The size of a cone shaped depression calculated on the basis of empirical formulae can be ten times smaller than the size of the real depression. It is suggested that using a formula based on the Dupuit formula is superior to other methods of depression calculation. According to the derived formulae the radius of the depresion cone is a function of parameters of the water bearing horizons, size of surface mine working and of water depression. The proposed formula also takes into account the influence of atmospheric factors (water influx caused by precipitation, etc.). (1 ref.) (In Polish)

  3. Chapter 10: Establishing native trees on legacy surface mines

    Science.gov (United States)

    J.A. Burger; C.E. Zipper; P.N. Angel; N. Hall; J.G. Skousen; C.D. Barton; S. Eggerud

    2017-01-01

    More than 1 million acres have been surface mined for coal in the Appalachian region. Today, much of this land is unmanaged, unproductive, and covered with nonnative plants. Establishing productive forests on such lands will aid restoration of ecosystem services provided by forests—services such as watershed protection, water quality enhancement, carbon storage, and...

  4. Safety standards of electrical equipment in surface mines. [USSR

    Energy Technology Data Exchange (ETDEWEB)

    Zhidkov, V.O.; Il' in, Yu.N.; Neyaskin, D.V.

    1985-03-01

    Modified safety regulations developed by the VostNII Institute are discussed. The safety regulations for electrical equipment used in surface coal mines are modifications of general safety regulations in coal surface mining. The modified regulations cover: improved protection from short circuits and grounds in electrical systems with voltage higher than 1000 V, protection systems for heavy-duty electric motors and motors with thyristor control, operation of power shovels on benches with contact systems (hazards of damage to electric cables caused by moving mining equipment), operation of electrical equipment and contact systems on benches at which trucks are used for mine haulage (hazards of damage to electric cables by moving trucks).

  5. The market for large rigid haul trucks in surface mining

    Energy Technology Data Exchange (ETDEWEB)

    Gilewicz, P.

    2002-04-15

    Originally published in 2001 this updated report provides a definition of the market for large rigid haulers in surface mining. The analysis covers changes to the mining market segments buying these machines including the gains made by coal producers, retrenchment in copper mining, the consolidation taking place among gold mining companies, and the expansion of iron ore producers in Australia and Brazil. It includes a detailed accounting of 2001 truck shipments, and an analysis of trends in the Ultra-truck segment. It concludes with a revised forecast for shipments through 2006. 12 charts, 56 tabs., 2 apps.

  6. 12th International Symposium Continuous Surface Mining

    CERN Document Server

    2015-01-01

    This edited volume contains research results presented at the 12th International Symposium Continuous Surface Mining, ISCSM Aachen 2014. The target audience primarily comprises researchers in the lignite mining industry and practitioners in this field but the book may also be beneficial for graduate students.

  7. Survey of nine surface mines in North America. [Nine different mines in USA and Canada

    Energy Technology Data Exchange (ETDEWEB)

    Hayes, L.G.; Brackett, R.D.; Floyd, F.D.

    1981-01-01

    This report presents the information gathered by three mining engineers in a 1980 survey of nine surface mines in the United States and Canada. The mines visited included seven coal mines, one copper mine, and one tar sands mine selected as representative of present state of the art in open pit, strip, and terrace pit mining. The purpose of the survey was to investigate mining methods, equipment requirements, operating costs, reclamation procedures and costs, and other aspects of current surface mining practices in order to acquire basic data for a study comparing conventional and terrace pit mining methods, particularly in deeper overburdens. The survey was conducted as part of a project under DOE Contract No. DE-AC01-79ET10023 titled The Development of Optimal Terrace Pit Coal Mining Systems.

  8. Enhanced Surface Mine Reclamation Using Geomorphic Landform Principles

    Science.gov (United States)

    Sears, A.; Hopkinson, L. C.; Bise, C.; Quaranta, J.

    2013-12-01

    Approximately 40% of operating mines in West Virginia are surface mines, producing approximately 50 million tons of coal annually. Traditional surface mine techniques include end-dumping burden material removed from the surface into nearby valleys, resulting in valley fills with uniform slopes, terraces, and drainage ditches. These techniques provide the opportunity for improvement in the areas of stream loss, surface water infiltration and runoff, and downstream water quality. The objective of this research was to create alternative surface mine reclamation designs for a permitted valley fill. Four designs were created: i) dendritic drainage; ii) retrofit; iii) dendritic drainage with bench ponds; and iv) dendritic drainage with valley ponds. All designs were based on a permitted surface mine site (1.4 km2) in southern West Virginia. Characteristics such as stream length and cut/fill volume were compared among the four created designs, the traditional design, and the original pre-mined surface. Geomorphic landform principles including creating landforms with overall hydrologic balance were applied to the design permit area. The geomorphic landform design (GLD) resulted in approximately 5.3 km of created channel length, 5.7 x 107 m3 of fill material (same volume cut during mining), and was comprised of ridges, valleys, and channels. The same design principles were applied to the top surface of the traditional valley fill to create the retrofit design. The traditional valley fill (6.9 x 107 m3 volume) consisted of a level top surface with drainage ditches around the perimeter. Features of the retrofit GLD included complex slope profiles and a dendritic drainage pattern. The design resulted in 6.7 x 107 m3 of cut volume and 5.7 x 107 m3 of fill volume and approximately 8.4 km of stream length. The GLD design surface was used as the base for the surface water retention designs, which included a design with three bench ponds and one with three valley ponds. The bench

  9. Natural and planted flora of the log mountain surface - mined demonstration area, Bell County, Kentucky

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, R.L. [Berea College, KY (United States); Wade, G.L. [USDA Forest Service, Burlington, VT (United States); Straw, R.A. [Univ. of Tennessee Plateau Experiment Station, Crossville, TN (United States)

    1996-12-31

    A descriptive study of the naturally invading and planted flora was conducted during 1984-1985 on a 14- and 21-year-old contour surface mine the 14.2 ha Log Mountain Demonstration Area (LMDA), in Bell County, Kentucky. Six habitats are designated from areas created from coal mining; the 1963 bench, 1970 bench, bench highwalls, mine outslopes, mine seeps, and coal haul-telephone microwave tower road. Twenty-four of 25 woody and herbaceous species (11 indigenous, 13 non-indigenous) have persisted from plantings by personnel of the Northeastern Forest Experiment Station, USDA Forest Service. We recommend 11 native and exotic woody and herbaceous species for planting on coal surface-mined areas. An annotated list of vascular plants comprises 360 taxa (286 indigenous, 74 non-indigenous) in 224 genera from 82 families. Taxa consist of 1 Lycopodiophyta, 1 Equisetophyta, 8 Polypodiophyta, 7 Pinophyta, and 343 Magnoliophyta. The most species-rich families are the Asteraceae (64), Poaceae (39), Fabaceae (20), Cyperaceae (16), Rosaceae (13), and Lamiaceae (11). A total of 155 Bell County distribution records were documented. Three threatened Kentucky species (Gentiana decora, Liparis loeselii, Silene ovata) were present in refugial habitats created by surface mining. The high species richness has resulted from native and naturalized invading species from the environs, native and exotic planted species, and species from the remnant seed bank. Forest vegetation is a complex mosaic of natural and semi-natural plant communities on the unplanted and planted areas of LMDA.

  10. Coal Mine Permit Boundaries

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — ESRI ArcView shapefile depicting New Mexico coal mines permitted under the Surface Mining Control and Reclamation Act of 1977 (SMCRA), by either the NM Mining these...

  11. Northern bobwhite breeding season ecology on a reclaimed surface mine

    Science.gov (United States)

    Brooke, Jarred M.; Tanner, Evan P.; Peters, David C.; Tanner, Ashley M.; Harper, Craig A.; Keyser, Patrick D.; Clark, Joseph D.; Morgan, John J.

    2017-01-01

    Surface coal mining and subsequent reclamation of surface mines have converted large forest areas into early successional vegetative communities in the eastern United States. This reclamation can provide a novel opportunity to conserve northern bobwhite (Colinus virginianus). We evaluated the influence of habitat management activities on nest survival, nest-site selection, and brood resource selection on managed and unmanaged units of a reclaimed surface mine, Peabody Wildlife Management Area (Peabody), in west-central Kentucky, USA, from 2010 to 2013. We compared resource selection, using discrete-choice analysis, and nest survival, using the nest survival model in Program MARK, between managed and unmanaged units of Peabody at 2 spatial scales: the composition and configuration of vegetation types (i.e., macrohabitat) and vegetation characteristics at nest sites and brood locations (i.e., microhabitat). On managed sites, we also investigated resource selection relative to a number of different treatments (e.g., herbicide, disking, prescribed fire). We found no evidence that nest-site selection was influenced by macrohabitat variables, but bobwhite selected nest sites in areas with greater litter depth than was available at random sites. On managed units, bobwhite were more likely to nest where herbicide was applied to reduce sericea lespedeza (Lespedeza cuneata) compared with areas untreated with herbicide. Daily nest survival was not influenced by habitat characteristics or by habitat management but was influenced by nest age and the interaction of nest initiation date and nest age. Daily nest survival was greater for older nests occurring early in the breeding season (0.99, SE nutritional deficiencies caused by the abundance of sericea lespedeza. On reclaimed mine lands dominated by sericea lespedeza, we suggest continuing practices such as disking and herbicide application that are targeted at reducing sericea lespedeza to improve the vegetation for nesting

  12. Surface Mines, Other - Longwall Mining Panels

    Data.gov (United States)

    NSGIC Education | GIS Inventory — Coal mining has occurred in Pennsylvania for over a century. A method of coal mining known as Longwall Mining has become more prevalent in recent decades. Longwall...

  13. Coal markets in transition

    Energy Technology Data Exchange (ETDEWEB)

    Romer, R.

    1990-01-01

    Describes Colorado's coal industry, and the implementation of a nine point mining plan announced in 1988. This plan includes an environmental regulatory review, coal royalty reform, production and marketing incentives, clean coal and clean air issues, and promotion of the coal industry. Other issues to be addressed are abandoned mine reclamation, abandoned mine safety and land reclamation after surface mining. International markets for Colorado coal are also discussed.

  14. Process analysis and optimization models defining recultivation surface mines

    Directory of Open Access Journals (Sweden)

    Dimitrijević Bojan V.

    2015-01-01

    Full Text Available Surface mines are generally open and very dynamic systems influenced by a large number of technical, economic, environmental and safety factors and limitations in all stages of the life cycle. In this paper the dynamic compliance period surface mining phases and of the reclamation. Also, an analysis of the reclamation of surface mines, and process flow management project recultivation is determined by the principled management model reclamation. The analysis of the planning process is defined by the model optimization recultivation surface mine.

  15. Carbon Sequestration on Surface Mine Lands

    Energy Technology Data Exchange (ETDEWEB)

    Donald Graves; Christopher Barton; Richard Sweigard; Richard Warner; Carmen Agouridis

    2006-03-31

    Since the implementation of the federal Surface Mining Control and Reclamation Act of 1977 (SMCRA) in May of 1978, many opportunities have been lost for the reforestation of surface mines in the eastern United States. Research has shown that excessive compaction of spoil material in the backfilling and grading process is the biggest impediment to the establishment of productive forests as a post-mining land use (Ashby, 1998, Burger et al., 1994, Graves et al., 2000). Stability of mine sites was a prominent concern among regulators and mine operators in the years immediately following the implementation of SMCRA. These concerns resulted in the highly compacted, flatly graded, and consequently unproductive spoils of the early post-SMCRA era. However, there is nothing in the regulations that requires mine sites to be overly compacted as long as stability is achieved. It has been cultural barriers and not regulatory barriers that have contributed to the failure of reforestation efforts under the federal law over the past 27 years. Efforts to change the perception that the federal law and regulations impede effective reforestation techniques and interfere with bond release must be implemented. Demonstration of techniques that lead to the successful reforestation of surface mines is one such method that can be used to change perceptions and protect the forest ecosystems that were indigenous to these areas prior to mining. The University of Kentucky initiated a large-scale reforestation effort to address regulatory and cultural impediments to forest reclamation in 2003. During the three years of this project 383,000 trees were planted on over 556 acres in different physiographic areas of Kentucky (Table 1, Figure 1). Species used for the project were similar to those that existed on the sites before mining was initiated (Table 2). A monitoring program was undertaken to evaluate growth and survival of the planted species as a function of spoil characteristics and

  16. CARBON SEQUESTRATION ON SURFACE MINE LANDS

    Energy Technology Data Exchange (ETDEWEB)

    Donald H. Graves; Christopher Barton; Richard Sweigard; Richard Warner

    2004-08-02

    The April-June 2004 quarter was dedicated to the establishment of monitoring systems for all the new research areas. Hydrology and water quality monitoring continues to be conducted on all areas as does weather data pertinent to the research. Studies assessing specific questions pertaining to carbon flux has been established and the invasion of the vegetation by small mammals is being quantified. The approval of two experimental practices associated with this research by the United States Office of Surface Mining was a major accomplishment during this period of time. These experimental practices will eventually allow for tree planting on long steep slopes with loose grading systems and for the use of loose dumped spoil on mountain top removal areas with no grading in the final layer of rooting material for tree establishment.

  17. Private and Social Costs of Surface Mine Reforestation Performance Criteria

    Science.gov (United States)

    Sullivan, Jay; Amacher, Gregory S.

    2010-02-01

    We study the potentially unnecessary costs imposed by strict performance standards for forest restoration of surface coal mines in the Appalachian region under the Surface Mining Control and Reclamation Act of 1977 (SMCRA) that can vary widely across states. Both the unnecessary private costs to the mine operator and costs to society (social costs) are reported for two performance standards, a ground cover requirement, and a seedling survival target. These standards are examined using numerical analyses under a range of site productivity class and market conditions. We show that a strict (90%) ground cover standard may produce an unnecessary private cost of more than 700/ha and a social cost ranging from 428/ha to 710/ha, as compared with a 70% standard. A strict tree survival standard of 1235 trees/ha, as compared with the more typical 1087 trees/ha standard, may produce an unnecessary private cost of approximately 200/ha, and a social cost in the range of 120 to 208/ha. We conclude that strict performance standards may impose substantial unnecessary private costs and social costs, that strict performance standards may be discouraging the choice of forestry as a post-mining land use, and that opportunities exist for reform of reforestation performance standards. Our study provides a basis for evaluating tradeoffs between regulatory efficiency and optimal reforestation effort.

  18. Surface Mining and Reclamation Effects on Flood Response of Watersheds in the Central Appalachian Plateau Region

    Science.gov (United States)

    Ferrari, J. R.; Lookingbill, T. R.; McCormick, B.; Townsend, P. A.; Eshleman, K. N.

    2009-01-01

    Surface mining of coal and subsequent reclamation represent the dominant land use change in the central Appalachian Plateau (CAP) region of the United States. Hydrologic impacts of surface mining have been studied at the plot scale, but effects at broader scales have not been explored adequately. Broad-scale classification of reclaimed sites is difficult because standing vegetation makes them nearly indistinguishable from alternate land uses. We used a land cover data set that accurately maps surface mines for a 187-km2 watershed within the CAP. These land cover data, as well as plot-level data from within the watershed, are used with HSPF (Hydrologic Simulation Program-Fortran) to estimate changes in flood response as a function of increased mining. Results show that the rate at which flood magnitude increases due to increased mining is linear, with greater rates observed for less frequent return intervals. These findings indicate that mine reclamation leaves the landscape in a condition more similar to urban areas rather than does simple deforestation, and call into question the effectiveness of reclamation in terms of returning mined areas to the hydrological state that existed before mining.

  19. Carbon Sequestration on Surface Mine Lands

    Energy Technology Data Exchange (ETDEWEB)

    Donald H. Graves; Christopher Barton; Richard Sweigard; Richard Warner

    2005-10-02

    During this quarter a general forest monitoring program was conducted to measure treatment effects on above ground and below ground carbon C and Nitrogen (N) pools for the tree planting areas. Detailed studies to address specific questions pertaining to Carbon cycling was initiated with the development of plots to examine the influence of mycorrhizae, spoil chemical and mineralogical properties, and use of amendment on forest establishment and carbon sequestration. Efforts continued during this period to examine decomposition and heterotrophic respiration on C cycling in the reforestation plots. Projected climate change resulting from elevated atmospheric carbon dioxide has given rise to various strategies to sequester carbon in various terrestrial ecosystems. Reclaimed surface mine soils present one such potential carbon sink where traditional reclamation objectives can complement carbon sequestration. New plantings required the modification and design and installation on monitoring equipment. Maintenance and data monitoring on past and present installations are a continuing operation. The Department of Mining Engineering continued the collection of penetration resistance, penetration depth, and bulk density on both old and new treatment areas. Data processing and analysis is in process for these variables. Project scientists and graduate students continue to present results at scientific meetings, tours and field days presentations of the research areas are being conducted on a request basis.

  20. CARBON SEQUESTRATION ON SURFACE MINE LANDS

    Energy Technology Data Exchange (ETDEWEB)

    Donald H. Graves; Christopher Barton; Richard Sweigard; Richard Warner

    2003-10-30

    The 2002-2003 Department of Energy plantings amounted to 164 acres containing 111,520 tree seedlings in eastern and western Kentucky. Data gathered on these trees included an inventory to determine survival of all planted species. A sub-sample of seedlings was selected to assess the height and diameter of individual species of seedlings established. Additional efforts involved collection of soil sample and litter samples, analysis of herbaceous ground cover from vegetation clip plots and leaf area on each tree species, and development of tissue collections. All areas were sampled for penetration resistance, penetration depth (or depth to refusal), and bulk density at various depths. Rain fall events and flow rates were recorded. The water quality of runoff samples involved the determination of total and settleable solids and particle size distribution. A study was initiated that will focus on the colonization of small mammals from forest edges to various areas located on reclaimed surface mines. This effort will provide a better understanding of the role small mammals and birds have in the establishment of plant communities on mine lands that will be useful in developing and improving reclamation techniques.

  1. 30 CFR 816.87 - Coal mine waste: Burning and burned waste utilization.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Coal mine waste: Burning and burned waste utilization. 816.87 Section 816.87 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT...-SURFACE MINING ACTIVITIES § 816.87 Coal mine waste: Burning and burned waste utilization. (a) Coal mine...

  2. Surface mining of the uranium deposit of Roussay (France)

    Energy Technology Data Exchange (ETDEWEB)

    Begeot, M.; Marvy, A.

    1986-12-01

    Surface mining of this COGEMA mine started in October 1983. Mine, personnel, deposit geology, prospecting, mining method and equipment, environmental problems (dusts, noise, water treatment, revegetation) are described. 158000 kg of uranium were produced in 1985.

  3. Mapping extent and change in surface mines within the United States for 2001 to 2006

    Science.gov (United States)

    Soulard, Christopher E.; Acevedo, William; Stehman, Stephen V.; Parker, Owen P.

    2016-01-01

    A complete, spatially explicit dataset illustrating the 21st century mining footprint for the conterminous United States does not exist. To address this need, we developed a semi-automated procedure to map the country's mining footprint (30-m pixel) and establish a baseline to monitor changes in mine extent over time. The process uses mine seed points derived from the U.S. Energy Information Administration (EIA), U.S. Geological Survey (USGS) Mineral Resources Data System (MRDS), and USGS National Land Cover Dataset (NLCD) and recodes patches of barren land that meet a “distance to seed” requirement and a patch area requirement before mapping a pixel as mining. Seed points derived from EIA coal points, an edited MRDS point file, and 1992 NLCD mine points were used in three separate efforts using different distance and patch area parameters for each. The three products were then merged to create a 2001 map of moderate-to-large mines in the United States, which was subsequently manually edited to reduce omission and commission errors. This process was replicated using NLCD 2006 barren pixels as a base layer to create a 2006 mine map and a 2001–2006 mine change map focusing on areas with surface mine expansion. In 2001, 8,324 km2 of surface mines were mapped. The footprint increased to 9,181 km2 in 2006, representing a 10·3% increase over 5 years. These methods exhibit merit as a timely approach to generate wall-to-wall, spatially explicit maps representing the recent extent of a wide range of surface mining activities across the country. 

  4. Effects of industrial microcomputer use in control systems for machines and conveyors in surface mining

    Energy Technology Data Exchange (ETDEWEB)

    Borczyk, Z.; Rosseger, A. (Poltegor-Instytut, Wroclaw (Poland))

    1991-01-01

    Evaluates use of the ComPan Pzaz microcomputers manufactured in Poland for control of bucket wheel excavators without thrust action and for belt conveyors used in brown coal surface mines in Poland. The microcomputer consists of 14 standard microprocessor controller modules and 4 specialized modules. Structure of the control system, types of operations controlled by the system and effects of computerized control on safety and efficiency of operation of bucket wheel excavators are analyzed. Use of the ComPan Pzaz microcomputers for control of steep-angle conveyor systems (with a drive power from 1,000 kW to 4,000 kW) is evaluated. The system controls conveyor start-up and conveyor braking. Selected aspects of ComPan Pzaz reliability and service are also discussed. 2 refs.

  5. 30 CFR 780.27 - Reclamation plan: Surface mining near underground mining.

    Science.gov (United States)

    2010-07-01

    ... underground mining. 780.27 Section 780.27 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND... RECLAMATION AND OPERATION PLAN § 780.27 Reclamation plan: Surface mining near underground mining. For surface mining activities within the proposed permit area to be conducted within 500 feet of an underground mine...

  6. NOVEL EXCAVATION TECHNOLOGIES FOR EFFICIENT AND ECONOMIC SURFACE MINING

    Energy Technology Data Exchange (ETDEWEB)

    Vladislav Kecojevic; Samuel Frimpong

    2005-05-01

    Ground excavation constitutes a significant component of production costs in any surface mining operation. The excavation process entails material digging and removal in which the equipment motion is constrained by the workspace geometry. A major excavation problem is the variability of material properties, resulting in varying mechanical energy input and stress loading of shovel dipper-and-tooth assembly across the working bench. This variability has a huge impact on the shovel dipper and tooth assembly in hard formations. With this in mind, the primary objectives of the project were to (i) provide the theoretical basis to develop the Intelligent Shovel Excavation (ISE) technology to solve the problems associated with excavation in material formations; (ii) advance knowledge and frontiers in shovel excavation through intelligent navigation; and (iii) submit proposal for the design, development and implementation of the ISE technology for shovel excavation at experimental surface mining sites. The mathematical methods were used to (i) develop shovel's kinematics and dynamics, and (ii) establish the relationship between shovel parameters and the resistive forces from the material formation during excavation process. The ADAMS simulation environment was used to develop the hydraulic and cable shovel virtual prototypes. Two numerical examples are included to test the theoretical hypotheses and the obtained results are discussed. The area of sensor technology was studied. Application of specific wrist-mounted sensors to characterize the material, bucket and frame assembly was determined. Data acquisition, display and control system for shovel loading technology was adopted. The concept of data acquisition and control system was designed and a shovel boom stresses were simulated. A multi-partner collaboration between research organizations, shovel manufacturer, hardware and sensor technology companies, and surface mining companies is proposed to test design

  7. An assessment of microbial communities associated with surface mining-disturbed overburden.

    Science.gov (United States)

    Poncelet, Dominique M; Cavender, Nicole; Cutright, Teresa J; Senko, John M

    2014-03-01

    To assess the microbiological changes that occur during the maturation of overburden that has been disturbed by surface mining of coal, a surface mining-disturbed overburden unit in southeastern Ohio, USA was characterized. Overburden from the same unit that had been disturbed for 37 and 16 years were compared to undisturbed soil from the same region. Overburden and soil samples were collected as shallow subsurface cores from each subregion of the mined area (i.e., land 16 years and 37 years post-mining, and unmined land). Chemical and mineralogical characteristics of overburden samples were determined, as were microbial respiration rates. The composition of microbial communities associated with overburden and soil were determined using culture-independent, nucleic acid-based approaches. Chemical and mineralogical evaluation of overburden suggested that weathering of disturbed overburden gave rise to a setting with lower pH and more oxidized chemical constituents. Overburden-associated microbial biomass and respiration rates increased with time after overburden disturbance. Evaluation of 16S rRNA gene libraries that were produced by "next-generation" sequencing technology revealed that recently disturbed overburden contained an abundance of phylotypes attributable to sulfur-oxidizing Limnobacter spp., but with increasing time post-disturbance, overburden-associated microbial communities developed a structure similar to that of undisturbed soil, but retained characteristics of more recently disturbed overburden. Our results indicate that over time, the biogeochemical weathering of disturbed overburden leads to the development of geochemical conditions and microbial communities that approximate those of undisturbed soil, but that this transition is incomplete after 37 years of overburden maturation.

  8. Economic and technical feasibility and optimum production at the Ramici surface mine in the area of Banja Luka (SW Bosnia)

    Energy Technology Data Exchange (ETDEWEB)

    Fazlibegovic, J.; Kostovic, G.

    1978-04-01

    Comments on the results of geological exploration carried out in the Ramici lignite deposit in the period of 1925-1960 are given. Coal reserves of 37.5 million tons were established. Based on a study made by the Institute for Mining and Technological Research in Tuzla an investment program for the construction of a surface mine has been proposed. The capacity of this mine should be 500,000-1,000,000 t/a. As an optimum capacity 700,000 t/a is suggested. For the excavation work over a 12 year period the employment of shovel excavators has been proposed. Further exploration work should increase the coal reserves and extend the planned period of exploitation.

  9. Nest success of grassland sparrows on reclaimed surface mines

    Science.gov (United States)

    Stauffer, G.E.; Diefenbach, D.R.; Marshall, M.R.; Brauning, D.W.

    2011-01-01

    Grasslands resulting from surface mine reclamation support grassland songbird populations in several midwestern and eastern states in the United States, especially where reclaimed mines are large (>1,000ha). However, most reclaimed surface mines in Pennsylvania are small (success is unknown. We evaluated nest success of grasshopper (Ammodramus savannarum), Henslow's (A. henslowii), and Savannah sparrows (Passerculus sandwichensis) on 4 reclaimed surface mines (50-180ha) in western Pennsylvania, USA from 2006 to 2007. Overall nest success based on mean covariate values was 0.435 (95% CI = 0.376-0.504) for grasshopper sparrows, 0.396 (95% CI = 0.295-0.533) for Henslow's sparrows, and 0.158 (95% CI = 0.063-0.392) for Savannah sparrows. These estimates of nest success are comparable to those on larger reclaimed mines and other habitats. Grasshopper and Henslow's sparrow nests that were well concealed were less likely to fail than highly visible nests (??visible = -0.028, CI = -0.051 to -0.005 for grasshopper sparrows; ??visible = -0.063, CI = -0.112 to -0.014 for Henslow's sparrows), and nests in areas with surrounding deep litter were more likely to fail than nests in areas with shallow litter (??litterD = -0.145, CI = -0.335 to 0.045 for grasshopper sparrows; ??litterD = -0.676, CI = -1.187 to -0.116 for Henslow's sparrows). Savannah sparrow nests in areas with high visual obstruction by vegetation were less likely to fail than nests in areas with sparse and short vegetation (??VisOb = 0.048, CI = 0.006-0.091). Daily probability of survival for grasshopper sparrow nests was greatest early and late in the breeding season, and Savannah sparrow nest survival followed a decreasing linear trend. Nest survival of Henslow's sparrows was greater on warm days (??temp = 0.197, CI = 0.014-0.379), whereas for Savannah sparrows nest survival decreased on warm days and on days with rain, but for Savannah sparrows confidence intervals of weather effects included zero (??temp = -0

  10. 30 CFR 772.11 - Notice requirements for exploration removing 250 tons of coal or less.

    Science.gov (United States)

    2010-07-01

    ... 250 tons of coal or less. 772.11 Section 772.11 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... requirements for exploration removing 250 tons of coal or less. (a) Any person who intends to conduct coal exploration operations outside a permit area during which 250 tons or less of coal will be removed,...

  11. Surface mining machines problems of maintenance and modernization

    CERN Document Server

    Rusiński, Eugeniusz; Moczko, Przemysław; Pietrusiak, Damian

    2017-01-01

    This unique volume imparts practical information on the operation, maintenance, and modernization of heavy performance machines such as lignite mine machines, bucket wheel excavators, and spreaders. Problems of large scale machines (mega machines) are highly specific and not well recognized in the common mechanical engineering environment. Prof. Rusiński and his co-authors identify solutions that increase the durability of these machines as well as discuss methods of failure analysis and technical condition assessment procedures. "Surface Mining Machines: Problems in Maintenance and Modernization" stands as a much-needed guidebook for engineers facing the particular challenges of heavy performance machines and offers a distinct and interesting demonstration of scale-up issues for researchers and scientists from across the fields of machine design and mechanical engineering.

  12. Bitumen recovery from surface mined oil sands recycle water ponds

    Energy Technology Data Exchange (ETDEWEB)

    Mikula, R.J.; Munoz, V.A.; Elliott, G. L. [Natural Resources Canada, CanmetENERGY, Devon, Alberta (Canada)

    2011-07-01

    In surface mined oil sands, high bitumen recovery can be achieved but tailings have accumulated over the years. Several technologies have been proposed for recovering bitumen from tailings, but because this bitumen carries high surfactant concentrations there have been processing problems. This paper presents the application of oxidized ore characterization and processing methods to process tailings pond bitumen. Laboratory tests were carried out to characterize bitumen samples coming from four different tailings sources and tests were run with caustic additive. Results showed that high caustic additions can be applied to surfactant rich tailings pond bitumen to avoid downstream froth treatment emulsion problems; the oxidation degree should be carefully monitored. This study demonstrated that the use of caustic additive, already used for oxidized ores, can be applied to treat the bitumen recovered from tailings streams.

  13. Wildlife habitats provided by aquatic plant communities of surface mine lakes

    Energy Technology Data Exchange (ETDEWEB)

    Coss, R.D.; Nawrot, J.R.; Klimstra, W.D.

    1985-12-01

    Over 6000 ha of water impoundments have resulted from surface mining for coal in Illinois. A study was conducted to characterize aquatic plant communities in selected bodies of water, to evaluate these communities as wildlife habitat, and to determine utilization of vegetation by vertebrates. Study areas included between spoilbank impoundments and final cuts/haulroad incline lakes. All lakes had water quality sufficient to support aquatic plants dominated by Chara and Potamogeton. Littoral zone cover was good throughout the growing season; and remained relatively stable. Emergent plant communities were well-developed at only one lake; cattle grazing and steep shorelines restricted growth at other sites. A total of 89 vertebrate species was identified in and near the lakes studied. Utilization was most probably affected by development of emergent and watershed vegetation, accessibility of aquatic plants, and morphological features of the lakes. Management recommendations for enhancing wildlife habitat included grading to develop topographic variation and extensive littoral areas, and partial exclusion of cattle. Such waters can contribute significantly to available wildlife habitat in certain areas in Illinois, and may, in many instances, be a more desirable post-mining land use than row-crop production. 41 references, 4 figure, 3 table.

  14. Suitability of dredged material for reclamation of surface-mined land. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Harrison, W.; Van Luik, A.

    1979-12-01

    Eroding ridges of acidic coal-mine spoil in La Salle County, Illinois, were leveled to form a gently-sloped raised plateau. Four test plots were constructed: a control plot and three treatment plots that received a 0.9-m-thick cover of dredged material obtained from the Metropolitan Sanitary District of Greater Chicago. Two treatment plots received lime applications and all plots were seeded with a mixture of grasses. Pressure-vacuum soil water samplers were installed, in duplicate, at two levels in the control plot and at three levels in each treatment plot. The three levels in the treatment plots coincided with dredged material, the dredged-material mine-spoil interface, and the underlying mine spoil. Surface water, soil water, and groundwater were monitored for 29 water-quality parameters for one year. Rainfall, air temperature, runoff, and water-level elevation data were collected also. Detailed analysis of the data indicates that the dredged material used in this study does not adversely affect water quality; it supports abundant plant growth, lessens groundwater contamination, and controls acid runoff. The dredged material is judged to be a suitable material for use in reclamation of surface-mined land.

  15. USING SYSTEM SIMULATION METHOD AND CADTECHNIQUE TO SOLVE THE MINING ENGINEERING RELIABILITY IN SURFACE MINES

    Institute of Scientific and Technical Information of China (English)

    才庆祥; 彭世济; 张达贤

    1996-01-01

    Subjected to various stochastic factors, surface mining engineering reliability is difficult to solve by using general reliability mathematical method. The concept of reliability measurement is introduced; And the authors have combined system simulation method with CAD technique and developed an interactive color character graphic design system for evaluating and solving the mining engineering reliability in surface mines under the given constraints.

  16. 30 CFR 905.816 - Performance standards-Surface mining activities.

    Science.gov (United States)

    2010-07-01

    ... of Hazardous Substances Law, Cal. Health & Safety Code section 25280 et seq.; the Solid Waste... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Performance standards-Surface mining activities. 905.816 Section 905.816 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT...

  17. 30 CFR 910.816 - Performance standards-surface mining activities.

    Science.gov (United States)

    2010-07-01

    ..., Environmental Protection Division; the Solid Waste Management Rules of the Georgia Department of Natural... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Performance standards-surface mining activities. 910.816 Section 910.816 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT...

  18. Photogrammetrical deformation measurements at structures located in the vicinity of surface mine slopes, and forecasting of expected deformation values

    Energy Technology Data Exchange (ETDEWEB)

    Wedekind, O. (Ingenieurschule fuer Geodaesie und Kartographie, Dresden (German Democratic Republic))

    1990-02-01

    Discusses measurement of equipment stability in brown coal surface mines. A long conveyor belt system installed parallel to the spoil bank slope and a spoil belt conveyor bridge were surveyed for movements of position. Photogrammetrical measuring instrument was the UMK 10/1318 unit of Carl Zeiss Jena; for data analysis the Stecometer G and the TEBIT program systems were used. Measurement results are provided. Forecasting possible future movement of belt conveyor supports was further carried out using a mathematical collocation model and the empirical Moeser auto-covariance function of the bell shaped cosinus type. Results of mathematical forecasting are compared to repeated measurements carried out after 6 months, proving suitability of the mathematical method. 3 refs.

  19. Surface Mine System Simulation and Safety Risk Management

    Institute of Scientific and Technical Information of China (English)

    ZHANG Rui-xin; YU Dong-fang; LI Xin-wang; YAO Xin-gang; LIU Yu

    2006-01-01

    Modern surface mines, either mono-system or multi-systems, need a large fleet of equipment consisting of excavators, loaders, haulers and auxiliary machines. Presently, the complexity of the system, the interference between sub-systems and the lag in management skills has been a bottle neck for improving productivity of the system. Based on the fact that the traditional tools for safety analysis have been insufficient to evaluate systematically and dynamically the safety risks, this paper tries to create a virtual reality tool consisting of human, machine and mines, using Pro/E and the 3D MAX software in order to evaluate visually the operations of typical mining equipment, such as the bucket wheel excavator (BWE), the shovel, the truck and the dragline. Within this virtual world, the behavior of the system, such as interaction, interference and potential risk can be replayed and reviewed visually. The objective of the study is to identify the critical safety issues of the system and to provide a convenient and powerful tool for safety training and safety management.

  20. EVALUATION OF THE GEOLOGICAL RELIABILITY OF SURFACE MINING DEPOSIT

    Institute of Scientific and Technical Information of China (English)

    韩金炎; 孙小彦; 彭世济

    1994-01-01

    The optimal decision theory and exploitation reliability of large scale mining area have heen studied in China since the late 1980′s. Researches have been carried out under the thought of mannature-machine system, and encouraging results have been obtained. The reliability evaluation of mining engineering includes the reliability evaluation of natural resources, mining technology and mine economics etc. And the geological reliability of deposit, as a natural condition, is the basis of all other evaluation works. The paper summarizes the method for evaluating the geological reliability of deposit, discusses the reliability of estimating methods for coal reserves and coal quality, evaluates the natural resources reliability of the Pit 1 of Antaibao, Surface Coal Mine, Pingsuo, Shanxi Province. which was taken as a case study.

  1. 30 CFR 817.87 - Coal mine waste: Burning and burned waste utilization.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Coal mine waste: Burning and burned waste utilization. 817.87 Section 817.87 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT...-UNDERGROUND MINING ACTIVITIES § 817.87 Coal mine waste: Burning and burned waste utilization. (a) Coal mine...

  2. 76 FR 64099 - Notice of Competitive Coal Lease Sale, Wyoming

    Science.gov (United States)

    2011-10-17

    ...-way as required by typical mining practices. The total mineable stripping ratio of the coal in bank... to be offered consists of all reserves recoverable by surface mining methods in the following... reserves in the Wyodak- Anderson coal zone currently being recovered in the adjacent, existing mine. On...

  3. Yield and nutritive quality of forage legumes on reclaimed surface mined land

    Energy Technology Data Exchange (ETDEWEB)

    Ditsch, D.C.; Collins, M. [University of Kentucky, Quicksand, KY (United States). Robinson Experiment Station

    1998-07-01

    Legumes are important in the long-term nitrogen economy of surface mined lands and for establishing and maintaining quality livestock forage. Little information is available to reclamation specialists for use in selection of forage legume species based on productivity potential, persistence and nutritive quality for livestock. A study was initiated at two sites in the Appalachian coal fields of Kentucky to evaluate monocultures of alfalfa (Medicago sativa L.), red clover (Trifolium pratense L.) and birdsfoot trefoil (Lotus corniculatus L.) under management regimes suitable for livestock production. Legumes were harvested at the early bloom stage throughout the growing season for dry matter (DM) yield determination. Forage quality was determined by measuring crude protein (CP), neutral detergent fiber (NDF), acid detergent fiber (ADF), cellulose (CEL) and acid detergent lignin (ADL). High DM yields were produced by all species during the first production season (range 6.2-9.2 Mg ha{sup -1}) but yields of all species declined rapidly by year three. Birdsfoot trefoil demonstrated slightly greater drought tolerance during mid-season (July/August) than alfalfa and red clover. With the exception of site {number_sign}1 in 1992 (4 harvests), no more than 3 harvests were made during a single growing season. Crude protein concentration of these forage legumes was found to be within the range commonly measured on undisturbed lands. However, high NDF and ADF values were observed above those reported by others for the same species. These results indicate that it may be difficult to maintain a high level of productivity throughout the five-year bonding period under hay management. Management practices such as summer stockpiling may be necessary to compensate for the rapid and wide fluctuations in DM yield and quality due to low water-holding capacity of mine spoils. 15 refs., 2 figs., 7 tabs.

  4. THE INVESTMENT RELIABILITY ANALYSIS FOR A SURFACE MINE

    Institute of Scientific and Technical Information of China (English)

    彭世济; 卢明银; 张达贤

    1990-01-01

    It is stipulated in the China national document, named"The Economical Appraisal Methods for Construction Projects" that dynamic analysis should dominate the project economical appraisal methods.This paper has set up a dynamic investment forecast model for Yuanbaoshan Surface Coal Mine. Based on this model, the investment reliability using simulation and analytic methods has been analysed, anti the probability that the designed internal rate of return can reach 8.4%, from economic points of view, have been also studied.

  5. Preliminary analysis of surface mining options for Naval Oil Shale Reserve 1

    Energy Technology Data Exchange (ETDEWEB)

    1981-07-20

    The study was undertaken to determine the economic viability of surface mining to exploit the reserves. It is based on resource information already developed for NOSR 1 and conceptual designs of mining systems compatible with this resource. Environmental considerations as they relate to surface mining have been addressed qualitatively. The conclusions on economic viability were based primarily on mining costs projected from other industries using surface mining. An analysis of surface mining for the NOSR 1 resource was performed based on its particular overburden thickness, oil shale thickness, oil shale grade, and topography. This evaluation considered reclamation of the surface as part of its design and cost estimate. The capital costs for mining 25 GPT and 30 GPT shale and the operating costs for mining 25 GPT, 30 GPT, and 35 GPT shale are presented. The relationship between operating cost and stripping ratio, and the break-even stripping ratio (BESR) for surface mining to be competitive with room-and-pillar mining, are shown. Identification of potential environmental impacts shows that environmental control procedures for surface mining are more difficult to implement than those for underground mining. The following three areas are of prime concern: maintenance of air quality standards by disruption, movement, and placement of large quantities of overburden; disruption or cutting of aquifers during the mining process which affect area water supplies; and potential mineral leaching from spent shales into the aquifers. Although it is an operational benefit to place spent shale in the open pit, leaching of the spent shales and contamination of the water is detrimental. It is therefore concluded that surface mining on NOSR 1 currently is neither economically desirable nor environmentally safe. Stringent mitigation measures would have to be implemented to overcome some of the potential environmental hazards.

  6. Acidic pit lakes. The legacy of coal and metal surface mines

    Energy Technology Data Exchange (ETDEWEB)

    Geller, Walter; Schultze, Martin [Helmholtz Centre for Environmental Research - UFZ, Magdeburg (Germany); Wolkersdorfer, Christian (eds.) [Cape Breton Univ., Sydney, NS (Canada). Industrial Research Chair in Mine Water Remediation and Management; International Mine Water Association, Wendelstein (Germany). General Secretary; Kleinmann, Robert

    2013-07-01

    This monograph provides an international perspective on pit lakes in post-mining landscapes, including the problem of geogenic acidification. Much has been learned during the last decade through research and practical experience on how to mitigate or remediate the environmental problems of acidic pit lakes. In the first part of the book, general scientific issues are presented in 21 contributions from the fields of geo-environmental science, water chemistry, lake physics, lake modeling, and on the peculiar biological features that occur in the extreme habitats of acidic pit lakes. Another chapter provides an overview of methods currently used to remediate acidic pit lakes and treat outflowing acidic water. The second part of the book is a collection of regional surveys of pit lake problems from three European countries and Australia, and case studies of various individual representative lakes. A final case study provides an innovative approach to assessing the economic value of new pit lakes and balancing the costs and benefits, a valuable tool for decision makers.

  7. Long-Term Vegetation Recovery on Reclaimed Coal Surface Mines in the Eastern USA

    National Research Council Canada - National Science Library

    Karen D. Holl

    2002-01-01

    .... The goals of this study were to determine whether vegetation communities on reclaimed mines approximate those of the surrounding forest, and to evaluate how intensive reclamation practices used...

  8. Geological classification of coal deposits

    Energy Technology Data Exchange (ETDEWEB)

    Bretsnaidr, P.

    1985-02-01

    A new classification of coal deposits developed by the author is evaluated. The classification considers only selected factors which characterize a coal deposit. Each factor is described by a number of points ranging from 0 to 10. Geologic structure (deposits with one or more seams or with seam groups) is described using from 1 to 10 points. Secondary deformation of a coal deposit (e.g. tectonics) and hydrogeology (aquifers, filtration properties, etc.) are described using a 10 point scale. Coal seam structure (with or without partings) is characterized using 1 to 5 points. Coal seam thickness and its stability (4 thickness classes from 0.4 to 1.0 m, 1 to 3 m, 3 to 10 m and above 10 m) is described using 0 to 5 points. Coal seam quality (ash content, calorific value and coking properties) is described using 0 to 5 points. Other factors are characterized using a 10 point scale. Use of this deposit classification is explained using four examples: the Merkur surface mine (uncomplicated conditions), the Nosek surface mine (relatively complicated conditions), the Slany deposit (with complicated conditions) and the Jan Sverma deposit (with extremely complicated conditions).

  9. APPLICATION OF HIERARCHY ARTIFICIAL NEURAL NETWORK TO EVALUATE THE EXPLOITATION CONDITITONS OF SURFACE MINING AREA

    Institute of Scientific and Technical Information of China (English)

    李新春; 范力军

    1998-01-01

    It always adopts the direct hierarchy analysis to value the exploitation conditions of surface mining areas. This way has some unavoidable shortcomings because it is mainly under theaid of experts and it is affected by the subjective thinking of the experts. This paper puts forwards a new approach that divides the whole exploitation conditions into sixteen subsidiary systems and each subsidiary system forms a neural network system. The whole decision system of exploitation conditions of surface mining areas is composed of sixteen subsidiary neural network systems. Each neural network is practiced with the data of the worksite, which is reasonable and scientific. This way will be a new decision approach for exploiting the surface mining areas.

  10. Planning of excavation of seams characterized by complicated structure with the aim of coal mixing

    Energy Technology Data Exchange (ETDEWEB)

    Belyakov, Yu.I.; Pushkin, S.P. (Kievskii Inzhenerno-Stroitel' nyi Institut (USSR))

    1990-07-01

    Discusses use of mathematical modeling for optimization of surface mining in mines with a complicated coal deposit structure and changing coal quality. The modeling is aimed at stabilizing coal quality, especially ash content. Surface mines with bucket wheel excavators for overburden removal and mining and locomotives and railroad cars for mine haulage are modeled. The mines supply 2 classes of coal: with 47% ash and with 55%. The modeling is aimed at determining optimum advance rates of the bucket wheel excavators. Effects of mine haulage system, coal yard capacity, coal seam structure, fluctuations of coal quality in a coal deposit, requirements for optimum geometry of the working faces, benches and other elements that influence slope stability are considered. 2 refs.

  11. Restoration of surface-mined lands with rainfall harvesting

    Energy Technology Data Exchange (ETDEWEB)

    Sauer, R.H.; Rickard, W.H.

    1982-12-01

    Strip mining for coal in the arid western US will remove grazing land as energy demands are met. Conventional resotration usually includes leveling the spoil banks and covering them with top soil, fertilizing, seeding and irrigation with well or river water. An overview of research on an alternate method of restoring this land is reported. From 1976 through 1981 studies were conducted on the use of water harvesting, the collection and use of rainfall runoff, to restore the vegetative productivity of strip mined lands in arid regions. These studies tested the technical and economic feasibility of using partially leveled spoil banks at strip mines as catchment areas to collect and direct runoff to the topsoiled valley floor where crops were cultivated. Information was collected on the efficiency of seven treatments to increase runoff from the catchment areas and on the productivity of seven crops. The experiments were conducted in arid areas of Washington, Arizona, and Colorado. It was concluded that water harvesting can replace or augment expensive and inadequate supplies of well and river water in arid regions with a suitable climate. These studies showed that some treatments provided adequate runoff to produce a useful crop in the valleys, thus making this alternative approach to restoration technically feasible. This approach was also potentially economically feasible where the treatment costs of the catchment areas were low, the treatment was effective, the crop was productive and valuable, and earthmoving costs were lower than with conventional restoration involving complete leveling of spoil banks. It was also concluded that water harvesting can be made more effective with further information on catchment area treatments, which crops are most adaptable to water harvesting, the optimum incline of the catchment areas and climatic influences on water harvesting.

  12. Technological and Social Impact Assessment of Resource Extraction: The Case of Coal

    Science.gov (United States)

    Krebs, Girard

    1975-01-01

    This paper is a preliminary report of work in progress on the assessment of the social impact of coal extraction. The research is directed at examining the implications for the human community of the underground and surface mining methods of coal extraction. (BT)

  13. 30 CFR 750.21 - Coal extraction incidental to the extraction of other minerals.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Coal extraction incidental to the extraction of other minerals. 750.21 Section 750.21 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND... RECLAMATION OPERATIONS ON INDIAN LANDS § 750.21 Coal extraction incidental to the extraction of other minerals...

  14. 30 CFR 941.780 - Surface mining permit applications-minimum requirements for reclamation and operation plan.

    Science.gov (United States)

    2010-07-01

    ... pollution control, S. D. Comp. Laws Ann. Chap. 34A-2, and solid waste disposal, S. D. Comp. Laws Ann. Chap... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Surface mining permit applications-minimum... MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING...

  15. 77 FR 22607 - Notice of Competitive Coal Lease Sale, Wyoming

    Science.gov (United States)

    2012-04-16

    ... railroad right of way as required by typical mining practices. The total mineable stripping ratio of the... of all reserves recoverable by surface mining methods in the following-described lands located... owned by a Peabody Energy Corporation subsidiary. The tract contains surface mineable coal reserves...

  16. Variability of production in the Tito brown coal mines

    Energy Technology Data Exchange (ETDEWEB)

    Vukovic, S. (Institut za Rudarska Istrazivanja, Tuzla (Yugoslavia))

    1987-05-01

    Examines daily production fluctuations in the Banovici coal basin from 1978-1985, where 2,800-4,100 workers produced 2-2.3x10{sup 6} t/a from underground and surface mines. The underground mine used mechanized longwall mining, surface mines employed shovel excavators, draglines, dumpers and belt conveyors. Statistical data showed large variations (+/- 2.5%, from 4,630 to 7,792 t/day) in daily coal production; evaluation showed close correlations for surface and underground mines. Highest production was achieved on Saturdays and Sundays, lowest on Mondays, Wednesdays and Fridays. It is suggested that these variations may be due to maintenance work in the coal preparation plant, which was usually carried out on Mondays and Fridays. A stereogram of coal and overburden output for both types of mine and detailed statistical computations are included. 7 refs.

  17. Study on Removal Distance of a Crushing Station in Buzhaoba Surface Mine

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A semi-continuous technology combines the merits of discontinuous and continuous technologies. Compared with the discontinuous technology, the semi-continuous technology can be used to decrease haulage costs in mines because of the use of a belt conveyor instead of trucks. The method may improve efficiency by using shovels instead of BWE. This paper discusses the removal distance of a crushing station based on the Buzhaoba surface mine.

  18. Life cycle Greenhouse gas emissions of current Oil Sands Technologies: surface mining and in situ applications.

    Science.gov (United States)

    Bergerson, Joule A; Kofoworola, Oyeshola; Charpentier, Alex D; Sleep, Sylvia; Maclean, Heather L

    2012-07-17

    Life cycle greenhouse gas (GHG) emissions associated with two major recovery and extraction processes currently utilized in Alberta's oil sands, surface mining and in situ, are quantified. Process modules are developed and integrated into a life cycle model-GHOST (GreenHouse gas emissions of current Oil Sands Technologies) developed in prior work. Recovery and extraction of bitumen through surface mining and in situ processes result in 3-9 and 9-16 g CO(2)eq/MJ bitumen, respectively; upgrading emissions are an additional 6-17 g CO(2)eq/MJ synthetic crude oil (SCO) (all results are on a HHV basis). Although a high degree of variability exists in well-to-wheel emissions due to differences in technologies employed, operating conditions, and product characteristics, the surface mining dilbit and the in situ SCO pathways have the lowest and highest emissions, 88 and 120 g CO(2)eq/MJ reformulated gasoline. Through the use of improved data obtained from operating oil sands projects, we present ranges of emissions that overlap with emissions in literature for conventional crude oil. An increased focus is recommended in policy discussions on understanding interproject variability of emissions of both oil sands and conventional crudes, as this has not been adequately represented in previous studies.

  19. Coal mine spoil-water interaction: Ⅱ. Weathering concentrated metals in surface coal mine spoils

    Institute of Scientific and Technical Information of China (English)

    党志; 万国江; 李德忍

    1996-01-01

    Concentrations of metals are lower in coal shales collected from recently exposed surface mine wastes than in shales collected from spoils exposed to surface weathering for 45 a. In this period, the character of the spoils changes dramatically as a result of the accelerated breakdown of the freshly exposed minestones. Since the metals are held as unstable sulfides, it is suggested that enrichment may be caused by absorption of metals by colloid of iron or formation of organic complex compound with organic carbon existing in the remnant structure of coal mine spoil. This process may contribute to the triggering of soil contamination thresholds on coal-lands already heavily loaded with metals.

  20. Effects of surface mining on the hydrology and biology in the Stony Fork basin, Fayette County, Pennsylvania, 1978-85

    Science.gov (United States)

    Williams, D.R.; Ritter, J.R.; Mastrilli, T.M.

    1995-01-01

    The effects of surface coal mining on the water quality, sediment discharge, and aquatic biology of streams in the Stony Fork Basin in southwestern Pennsylvania were studied from 1978 through 1985. Data were collected at five stream sites and one mine discharge site. Field data included streamflow, temperature, specific conductance, pH, acidity, and alkalinity. Laboratory analyses included sulfate, aluminum, iron, manganese, zinc, and selected trace elements. Annual streamflow at gaged sites was not substantially different, suggesting that mining did not affect the total volume of streamflow significantly. Comparisons of sediment yields of the upstream control site (site 5) to the downstream site (site 1) indicated that the sediment yield at site 5 was greatest in 1978, 1981-83, and 1985. The sediment yields at both sites in 1979-80 were about the same. Differences in the drainage area sizes and effective control of sediment in the mined areas may explain the lack of increased sediment yield at the downstream site. As mining became more extensive throughout the basin in 1979-80 and later, several water-quality effects were observed downstream. Generally, specific conductance, sulfate, manganese, aluminum, and zinc increased; pH and alkalinity decreased. Acidity and iron typically increased immediately downstream of mined areas. No trace-element concentrations exceeded maximum contaminant levels established by the U.S. Environmental Protection Agency. Surface mining in the Stony Fork Basin severely affected the stream invertebrate and fish populations. During 1977-84, the number of taxonomic groups of invertebrates at sites affected by mine drainage decreased by 45 to 71 percent; the number of fish species decreased by 81 to 88 percent.

  1. Report: Congressionally Requested Information on the Status and Length of Review for Appalachian Surface Mining Permit Applications

    Science.gov (United States)

    Report #12-P-0083, November 21, 2011. After reconciling discrepancies and vetting information, we identified 185 surface mining permit applications to review from the list of 237 that we received from the senator.

  2. Characterization of seven United States coal regions. The development of optimal terrace pit coal mining systems

    Energy Technology Data Exchange (ETDEWEB)

    Wimer, R.L.; Adams, M.A.; Jurich, D.M.

    1981-02-01

    This report characterizes seven United State coal regions in the Northern Great Plains, Rocky Mountain, Interior, and Gulf Coast coal provinces. Descriptions include those of the Fort Union, Powder River, Green River, Four Corners, Lower Missouri, Illinois Basin, and Texas Gulf coal resource regions. The resource characterizations describe geologic, geographic, hydrologic, environmental and climatological conditions of each region, coal ranks and qualities, extent of reserves, reclamation requirements, and current mining activities. The report was compiled as a basis for the development of hypothetical coal mining situations for comparison of conventional and terrace pit surface mining methods, under contract to the Department of Energy, Contract No. DE-AC01-79ET10023, entitled The Development of Optimal Terrace Pit Coal Mining Systems.

  3. Switchgrass potential on reclaimed surface mines for biofuel production in West Virginia

    Science.gov (United States)

    Marra, Michael A.

    The high cost and environmental risks associated with non-renewable energy sources has caused an increased interest in, and development of renewable biofuels. Switchgrass (Panicum virgatum L.), a warm season perennial grass, has been investigated as a source of biofuel feedstock due to its high biomass production on marginal soils, its tolerance of harsh growing conditions, and its ability to provide habitat for wildlife and soil conservation cover. West Virginia contains vast expanses of reclaimed surface mine lands and could potentially benefit from the production of switchgrass as a biofuel feedstock. Furthermore, switchgrass production could satisfy Surface Mining Reclamation and Control Act of 1977 (SMCRA) requirements for reclamation bond release to mine operators. Three separate studies will be discussed in this thesis to determine if switchgrass grown on reclaimed surface mines can produce yields similar to yields from stands grown under normal agronomic conditions and what common surface mining reclamation practices may be most appropriate for growing switchgrass. The first study examined yield production of three commercially-available, upland switchgrass varieties grown on two reclaimed surface mines in production years two, three and four. The Hampshire Hill mine site, which was reclaimed in the late 1990s using top soil and treated municipal sludge, averaged 5,800 kg (ha-yr)-1 of switchgrass compared to 803 kg (ha-yr)-1 at the Hobet 21 site which was reclaimed with crushed, unweathered rock over compacted overburden. Site and variety interacted with Cave-in-Rock as the top performer at the more fertile Hampshire Hill site and Shawnee produced the highest yields at Hobet 21 (7,853 kg ha-1 and 1,086 kg ha-1 averaged across years, respectively). Switchgrass yields increased from 2009 to 2010, but declined from 2010 to 2011. Switchgrass yields from farmlands in this region averaged about 15000 kg (ha-yr)-1 in the research literature, so switchgrass grown

  4. THE DEVELOPMENT AND EXPERIMENT OF ACOMPUTER-CONTROLLED TRUCK DISPATCHING SYSTEM IN SURFACE MINE

    Institute of Scientific and Technical Information of China (English)

    苏靖; 刘胜富; 赵铁林

    1996-01-01

    The development and experiment of a computer-controlled truck dispatching system insurface mine is presented in this paper. It includes the system overall design, the system workingmode design, the selection of the best truck travel path, the development of truck fleet program-ming, the development of database management system, and the development of truck real timedispatching, etc. The successful experiment is carried out in Huolinhe surface mine, and the sat-isfied results are obtained. Application of this system can improve the system production and themine management. This system is the first one in our country at present.

  5. The Problem of Multiple Criteria Selection of the Surface Mining Haul Trucks

    Science.gov (United States)

    Bodziony, Przemysław; Kasztelewicz, Zbigniew; Sawicki, Piotr

    2016-06-01

    Vehicle transport is a dominant type of technological processes in rock mines, and its profit ability is strictly dependent on overall cost of its exploitation, especially on diesel oil consumption. Thus, a rational design of transportation system based on haul trucks should result from thorough analysis of technical and economic issues, including both cost of purchase and its further exploitation, having a crucial impact on the cost of minerals extraction. Moreover, off-highway trucks should be selected with respect to all specific exploitation conditions and even the user's preferences and experience. In this paper a development of universal family of evaluation criteria as well as application of evaluation method for haul truck selection process for a specific exploitation conditions in surface mining have been carried out. The methodology presented in the paper is based on the principles of multiple criteria decision aiding (MCDA) using one of the ranking method, i.e. ELECTRE III. The applied methodology has been allowed for ranking of alternative solution (variants), on the considered set of haul trucks. The result of the research is a universal methodology, and it consequently may be applied in other surface mines with similar exploitation parametres.

  6. Selection of overburden surface mining method in West Virginia by analytical hierarchy process

    Institute of Scientific and Technical Information of China (English)

    Timothy A.Nolan; Vladislav Kecojevic

    2014-01-01

    The broad objective of this research was to improve current surface mining practices and reduce negative environmental impact of overburden removal in West Virginia (WV). The specific objectives were to (i) compare con-ventional surface mining method (drilling, blasting, digging, and loading) to a surface miner (SM) method, and (ii) apply the analytical hierarchy process (AHP) to help select the optimal mining method based on production, cost and envi-ronmental criteria. The design and the procedures used in this research involve five interrelated modules:(i) rock properties of overburden in WV, (ii) drilling and blasting, (iii) digging and loading, (iv) SM method, and (v) comparative analysis and selection of the optimal mining method by AHP. Results of this research indicate that application of SM method would yield higher cost of overburden removal than conventional mining methods in rocks with a high unconfined compressive strength and abrasivity. A significant advantage of SM method, where applicable, is the elimination of the negative environmental impacts associated with blasting.

  7. Solution of the capacity increase of the waste dump at the Merkur surface mine in Czechoslovakia

    Energy Technology Data Exchange (ETDEWEB)

    Musil, P.

    1987-06-01

    The methods used in the past for backfilling the large dump at the Merkur surface mine have, due to an ignorance of the factors influencing dump stability, resulted in significant capacity reductions of the dump. This ignorance was the result of insufficient knowledge, research, and poor practice at the operation. Recent re-evaluation of the actual stability conditions has led to a solution which permits an increase in the dump capacity, such that it is compatible with future mining plans. By considering the structure of the soils being used as backfill, specific technological processes are being defined which enable the preservation of the highest possible shear strength of the clayey soils, and thereby maximize the utilization of the internal capacity with at least short term stability. Questions regarding the behaviour and properties of the loose clayey material are also being answered, and new methods of stability calculation for the high dump are being developed. The key to these solutions has been the knowledge gained regarding the shear strength of the loose clayey material under various effective stress conditions, while realizing that three different zones can exist simultaneously within the body of the dump: the slope areas (having the greatest failure-inducing stress), the temporary areas (having a somewhat lower applied stress), and the dump core (where the tendency to fail is nearly zero). Through a sound application of this knowledge, the capacity of the waste dump at the large Merkur surface mine has been adequately expanded for the future.

  8. Ecological rebuilding and land reclamation in surface mines inShanxi Province, China

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    It is well known that the mining industry produces a large amount of derelict land, and muses pollution of water loss and soil erosion as well as other environmental damage in China. As land is under pressure in China, it is now policy to restore or reclaim land despoiled by mining, the aim being to develop sustainable and healthy arable land ecosystems. This paper outlines the principles and approaches of ecological restoration, which have been adopted in Shanxi Province with reference to three typical surface mines. In the research, the principles of ecological engineering and ecological succession are considered as the critical theories of ecological restoration in mine degraded land. Meanwhile, the paper made a comparative research on main links of ecological rebuilding in three surface mines in Shanxi Province, which include new land construction, treatment of toxic substances, control of soil erosion, fertility management, irrigation, ecological planning and the establishment of legislation systems. As the research demonstrated, for successful restoration, new land construction is the fundamental framework, but it must be integrated with ecological engineering including ecological planning, the control of soil erosion and vegetation establishment and ecosystem creation in order to optimiee land productivity and soil fertility. In addition, the establishment of the legislation systems and organization of administration are also indispensable aspects of ecological rebuilding in mined land.

  9. Seventh symposium on coal mine drainage research. NCA/BCR coal conference and Expo IV

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-01-01

    The Seventh Symposium on Coal Mine Drainage Research, sponsored by the National Coal Association and Bituminous Coal Research, Inc., was held at the Kentucky Fair and Exposition Center, Louisville, Kentucky, October 18-20, 1977. Seventeen papers from the proceedings have been entered individually into EDB and ERA. Topics covered include chemical reactions of pyrite oxidation and acid formation in spoil banks, abandoned mines, etc., formation of small acid lakes from the drainage and their neutralization by natural and other neutralization measures, trace elements in acid mine drainage, ground water contamination, limnology, effects of surface mined ground reclamation and neutralization, water purification and treatment, mining and coal preparation plant waste disposal, ash and fly ash disposal (to minimize leaching from the wastes), runoff from large coal storage stockpiles during storms (prevention of environmental effects by collection and neutralization by passing through an ash pond). (LTN)

  10. Final Comparison of TM and MSS Data for Surface Mine Assessment in Logan County, West Virginia

    Science.gov (United States)

    Witt, R. G.; Blodget, H. W.; Marcell, R. M.

    1984-01-01

    A variety of classifications during both raw and transformed MSS and TM data sets from 4 September 1982 were performed for the Logan County, West Virginia study area. The object was to compare the utility of TM and MSS data for delineating small, irregular ground features, particularly surface mines, and also to test data reduction/transformation techniques (band selection, canonical analysis, and principal components) in relation to a traditional means of unsupervised classification. Statistical results demonstrate that, on the average, the TM classifications yielded an overall .53 factor of improvement relative to the MSS classifications. When the accuracies for only three minor (in terms of areal extent) land use categories are examined, the factor of improvement for TM over MSS increases to 1.48; i.e., the TM is nearly one and one-half times better than the MSS for delineating small and irregular ground features such as contour strip mines.

  11. 3D deformation effect and optimal excavated design of surface mine

    Institute of Scientific and Technical Information of China (English)

    WANG Shu-ren; FENG Ji-li

    2009-01-01

    The three-dimensional (3D) deformation effect of the slope engineering under the step-by-step excavation for the Antaibao surface mine was analyzed using the FLAC3D technique. An optimal excavated scheme with a relatively steeper slope angle of 47° instead of 30° was successfully implemented at the west wall in the geological section 73200 of the mine area, where the 3D effect of the nonlinear large deformation of the slope was taken into account. Based on the above research conclusion, put forward the countermeasures of shortening mining length, excavating by different regions, timely foot backfilling to protect the excavated slope, and monitoring and feedback adjustment by studying the nonlinear effect. The results show that these countermeasures are effective in controlling maximum deformation and increasing the stability of the slope.

  12. Direct-seeding of commercial trees on surface-mine spoil

    Energy Technology Data Exchange (ETDEWEB)

    Tackett, E.M.; Graves, D.H.

    1979-12-01

    Three large-seeded tree species, northern red oak (Quercus rubra), pin oak (Quercus palustris), and bur oak (Quercus macrocarpa) and one small-seeded species Paulownia (Paulownia tomentosa), were spot-seeded and European alder (Alnus glutinosa) was broadcast-seeded on eastern Kentucky surface mine spoil. Treatments included four mulches-hydromulch, shredded bark, shredded bark and poultry manure, and Real Earth (composted municipal waste and sewage sludge), two fertilizer treatments and two rates of grass/legume ground cover seed sown in competition with the tree species. Germination, growth and survival were evaluated after the first growing season. All three oak species germinated and grew well while both small-seeded species failed to become established from seed. Germination was affected by aspect, mulching, fertilizing and competition. Spoil moisture appeared to be indirectly responsible for most of the responses. The variables tested had little effect on the first years growth of the species tested.

  13. Insects in relation to black locust culture on surface-mine spoil in Kentucky, with emphasis on the locust twig borer, Ecdytolopha insiticiana Zell. (Lepidoptera: Tortricidae)

    Energy Technology Data Exchange (ETDEWEB)

    Thoeny, W.T.

    1986-01-01

    This research evaluated the impacts of herbivorous insects, emphasizing the locust twig borer, Ecdytolopha insiticiana Zeller, on black locust, Robinia pseudoacacia L., coppice production on a coal surface-mine spoil site in southeastern Kentucky. The natural history of E. insiticiana was also studied. The locust twig borer was a persistent and damaging pest in first-year coppice, which provided suitable larval habitat throughout the growing season. The locust leafminer, Odontota dorsalis (Thunberg), fed minimally on first-year coppice foliage except during 1983, when trees were severely drought-stressed. Soil-applied granular carbofuran significantly reduced infestations. Lindane stem treatments were not effective, but entire-tree applications did reduce herbivory. Stump sprouts with reduced levels of herbivory grew significantly taller than controls at both spacings in 1983, but only at the more dense spacing in 1984. Blacklight trap collections revealed two generations/year, and adults were present from early May until late August. Four species of hymenopterous and two species of dipterous parasitoids were recovered from E. insiticiana larvae.

  14. 30 CFR 942.779 - Surface mining permit applications-Minimum requirements for information on environmental resources.

    Science.gov (United States)

    2010-07-01

    ... requirements for information on environmental resources. 942.779 Section 942.779 Mineral Resources OFFICE OF... requirements for information on environmental resources. Part 779 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Information on Environmental Resources, shall apply to any person...

  15. 30 CFR 941.779 - Surface mining permit applications-minimum requirements for information on environmental resources.

    Science.gov (United States)

    2010-07-01

    ... requirements for information on environmental resources. 941.779 Section 941.779 Mineral Resources OFFICE OF... requirements for information on environmental resources. Part 779 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Information on Environmental Resources, shall apply to any person...

  16. 30 CFR 910.779 - Surface mining permit applications-minimum requirements for information on environmental resources.

    Science.gov (United States)

    2010-07-01

    ... requirements for information on environmental resources. 910.779 Section 910.779 Mineral Resources OFFICE OF... requirements for information on environmental resources. Part 779 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Information on Environmental Resources, shall apply to any person...

  17. 30 CFR 905.779 - Surface mining permit applications-Minimum requirements for information on environmental resources.

    Science.gov (United States)

    2010-07-01

    ... requirements for information on environmental resources. 905.779 Section 905.779 Mineral Resources OFFICE OF... requirements for information on environmental resources. (a) Part 779 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Information on Environmental Resources, shall apply to any person...

  18. 30 CFR 937.779 - Surface mining permit applications-minimum requirements for information on environmental resources.

    Science.gov (United States)

    2010-07-01

    ... requirements for information on environmental resources. 937.779 Section 937.779 Mineral Resources OFFICE OF... requirements for information on environmental resources. Part 779 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Information on Environmental Resources, shall apply to any person...

  19. 30 CFR 922.779 - Surface mining permit applications-minimum requirements for information on environmental resources.

    Science.gov (United States)

    2010-07-01

    ... requirements for information on environmental resources. 922.779 Section 922.779 Mineral Resources OFFICE OF... requirements for information on environmental resources. Part 779 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Information on Environmental Resources, shall apply to any person...

  20. 30 CFR 912.779 - Surface mining permit applications-minimum requirements for information on environmental resources.

    Science.gov (United States)

    2010-07-01

    ... requirements for information on environmental resources. 912.779 Section 912.779 Mineral Resources OFFICE OF... requirements for information on environmental resources. Part 779 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Information on Environmental Resources, shall apply to any person...

  1. 30 CFR 933.779 - Surface mining permit applications-minimum requirements for information on environmental resources.

    Science.gov (United States)

    2010-07-01

    ... requirements for information on environmental resources. 933.779 Section 933.779 Mineral Resources OFFICE OF... requirements for information on environmental resources. Part 779 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Information on Environmental Resources, shall apply to any person...

  2. 30 CFR 903.779 - Surface mining permit applications-Minimum requirements for information on environmental resources.

    Science.gov (United States)

    2010-07-01

    ... requirements for information on environmental resources. 903.779 Section 903.779 Mineral Resources OFFICE OF... requirements for information on environmental resources. (a) Part 779 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Information on Environmental Resources, applies to any person who...

  3. 30 CFR 921.779 - Surface mining permit applications-minimum requirements for information on environmental resources.

    Science.gov (United States)

    2010-07-01

    ... requirements for information on environmental resources. 921.779 Section 921.779 Mineral Resources OFFICE OF... requirements for information on environmental resources. Part 779 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Information on Environmental Resources, shall apply to any person...

  4. 30 CFR 939.779 - Surface mining permit applications-minimum requirements for information on environmental resources.

    Science.gov (United States)

    2010-07-01

    ... requirements for information on environmental resources. 939.779 Section 939.779 Mineral Resources OFFICE OF... requirements for information on environmental resources. Part 779 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Information on Environmental Resources, shall apply to any person...

  5. 30 CFR 947.779 - Surface mining permit applications-minimum requirements for information on environmental resources.

    Science.gov (United States)

    2010-07-01

    ... requirements for information on environmental resources. 947.779 Section 947.779 Mineral Resources OFFICE OF... requirements for information on environmental resources. Part 779 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Information on Environmental Resources, shall apply to any person...

  6. National coal resource assessment non-proprietary data: Location, stratigraphy, and coal quality for selected tertiary coal in the Northern Rocky Mountains and Great Plains region

    Science.gov (United States)

    Flores, Romeo M.; Ochs, A.M.; Stricker, G.D.; Ellis, M.S.; Roberts, S.B.; Keighin, C.W.; Murphy, E.C.; Cavaroc, V.V.; Johnson, R.C.; Wilde, E.M.

    1999-01-01

    One of the objectives of the National Coal Resource Assessment in the Northern Rocky Mountains and Great Plains region was to compile stratigraphic and coal quality-trace-element data on selected and potentially minable coal beds and zones of the Fort Union Formation (Paleocene) and equivalent formations. In order to implement this objective, drill-hole information was compiled from hard-copy and digital files of the: (1) U.S. Bureau of Land Management (BLM) offices in Casper, Rawlins, and Rock Springs, Wyoming, and in Billings, Montana, (2) State geological surveys of Montana, North Dakota, and Wyoming, (3) Wyoming Department of Environmental Quality in Cheyenne, (4) U.S. Office of Surface Mining in Denver, Colorado, (5) U.S. Geological Survey, National Coal Resource Data System (NCRDS) in Reston, Virginia, (6) U.S. Geological Survey coal publications, (7) university theses, and (8) mining companies.

  7. Coal fires in Indonesia

    Energy Technology Data Exchange (ETDEWEB)

    Whitehouse, Alfred E.; Mulyana, Asep A.S. [Office of Surface Mining/Ministry of Energy and Mineral Resources Coal Fire Project, Ministry of Energy and Mineral Resources, Agency for Training and Education, Jl. Gatot Subroto, Kav. 49, Jakarta 12950 (Indonesia)

    2004-07-12

    Indonesia's fire and haze problem is increasingly being ascribed to large-scale forest conversion and land clearing activities making way for pulpwood, rubber and oil palm plantations. Fire is the cheapest tool available to small holders and plantation owners to reduce vegetation cover and prepare and fertilize extremely poor soils. Fires that escaped from agricultural burns have ravaged East Kalimantan forests on the island of Borneo during extreme drought periods in 1982-1983, 1987, 1991, 1994 and 1997-1998. Estimates based on satellite data and ground observations are that more than five million hectares were burned in East Kalimantan during the 1997/1998 dry season. Not only were the economic losses and ecological damage from these surface fires enormous, they ignited coal seams exposed at the ground surface along their outcrops.Coal fires now threaten Indonesia's shrinking ecological resources in Kutai National Park and Sungai Wain Nature Reserve. Sungai Wain has one of the last areas of unburned primary rainforest in the Balikpapan-Samarinda area with an extremely rich biodiversity. Although fires in 1997/1998 damaged nearly 50% of this Reserve and ignited 76 coal fires, it remains the most valuable water catchment area in the region and it has been used as a reintroduction site for the endangered orangutan. The Office of Surface Mining provided Indonesia with the capability to take quick action on coal fires that presented threats to public health and safety, infrastructure or the environment. The US Department of State's Southeast Asia Environmental Protection Initiative through the US Agency for International Development funded the project. Technical assistance and training transferred skills in coal fire management through the Ministry of Energy and Mineral Resource's Training Agency to the regional offices; giving the regions the long-term capability to manage coal fires. Funding was also included to extinguish coal fires as

  8. 30 CFR 872.23 - Are there any restrictions on how you may use historic coal funds?

    Science.gov (United States)

    2010-07-01

    ... historic coal funds? 872.23 Section 872.23 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR ABANDONED MINE LAND RECLAMATION MONEYS AVAILABLE TO ELIGIBLE STATES... supply restoration under § 874.14 of this chapter; (c) Noncoal reclamation under § 875.12 of this chapter...

  9. Nutrient capital sequestration in pioneer plant communities on surface-mine spoil

    Energy Technology Data Exchange (ETDEWEB)

    Wade, G.L.

    1985-01-01

    Four pioneer plant communities on a surface-mine spoil were compared in terms of biomass production and nutrient capital sequestration. A chenopodium album-dominated community (Treatment 4) produced the greatest amount of biomass. Next were a community derived from a forest topsoil seed bank spread over mine spoil (Treatment 2), a seed bank community with common reclamation species seeded into it (Treatment 3), and a mix of grasses and Lespedeza commonly used in reclamation (Treatment 1). Amounts of nutrients sequestered in vegetation were not strictly proportional to biomass. Community nutrient contents were largely influenced by community biomass and the nutrient uptake characteristics of the species with most biomass. Significant changes in soil chemistry were found after one growing season. Addition of the reclamation mix of grasses and Lespedeza to the seed bank resulted in significantly fewer established native species. Native species lost their normal dominance and exhibited stunted growth and phenological delay in Treatment 3. Nutrient content niche, nutrient content niche share, and niche breadth (Levins; B) were calculated for important species in each community. Native species generally had reduced niche breadths and niche shares when reclamation species were added to the community. Community content niche, the sums of species content niches, varied between different types of pioneer communities.

  10. Conditions for use of APV automatic reclosing units in surface mine distribution networks

    Energy Technology Data Exchange (ETDEWEB)

    Zhidkov, V.O.; Polozkov, A.V.; Kotov, V.P.

    1986-08-01

    Assesses the potential for use of APV automatic reclosing units in 6-10 kV electrical networks for surface mining equipment, with particular reference to Kuzbass conditions (Kemerovougol'association). These units automatically restore power after single phase grounds caused by damage to cables, etc. There are two major problems with APV units: the need to check insulation before restoration of power so as to prevent more serious injury to electrocuted persons, and the danger of asynchronous start-up of synchronous electric motors in which rundown lasts several tens of seconds. The first of these problems can be overcome with the aid of KBU insulation monitoring units. Tests have been performed at VostNII to determine the optimum parameters, with measurements of actual cable insulation resistance at mines. The minimum insulation resistance may be set at about 100 kohm. The second problem requires a no current condition before the APV for as long as 60 s to ensure full rundown of motors. An equation for determining the duration of this condition is given. Field suppression devices should be fitted to synchronous motors.

  11. Guide for surface coal mine reclamation plans

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-11-15

    The purpose of the guide is to provide a framework for Nova Scotia's coal mining community to consult during reclamation planning and environmental assessment. The guide describe the best management practices for application to surface mine reclamation. Principles of reclamation, standard submission requirements for a reclamation plan, planning for reclamation, landscape design, and revegetation, and methods for site preparation, monitoring, and maintenance are discussed. Backfilling, flooded excavation management, and other options are outlined. The reclamation plan must consider decommissioning of equipment and infrastructure, water retention and treatment ponds, acid rock drainage control and monitoring, site monitoring, watercourse management, and public safety. A glossary is included.

  12. Meeting processing challenges in clean coal utilization

    Energy Technology Data Exchange (ETDEWEB)

    Chugh, Y.P.; Patwardhan, A.; Barnwal, J.P. [Southern Illinois University, Carbondale, IL (United States). Dept. of Mining and Mineral Resources Engineering

    2003-02-01

    The paper identifies some of the major challenges facing processing for clean coal utilization today. Some of the ongoing research at Southern Illinois University in the areas of plant optimization, fine coal cleaning and dewatering, fine coal-water slurry combustion, development of multiple products and mine-mouth utilization for lower grade products, and co-management of coal processing wastes and coal combustion byproducts underground, or as a cover material suitable for vegetation in surface mine reclamation is approaching commercialization. Additional research has been initiated recently in low cost desulfurization for SOx reduction, and/or reducing scrubbing costs. An integrated approach to evaluating processing unit operation for enhancing overall profitability of a mining complex is paying dividends. The approach is a good tool to assess role of processing for clean coal utilization in any setting. The authors have attempted to demonstrate its use for Indian coals. They plan to develop a computer program for making this integrated assessment approach more user friendly. 33 refs., 4 figs., 10 tabs.

  13. In-situ coal gasification as a progressive coal utilization method

    Energy Technology Data Exchange (ETDEWEB)

    Petrenko, E.V.; Saltykov, I.F.

    1988-02-01

    Describes the Podzemgaz coal gasification station at Angren that was put into operation in 1961. It exploits a 15 m thick and 120-250 m deep seam of brown coal. Technology of in-situ coal gasification is described and its results are compared in regard to cost and efficiency with the results of conventional surface mining. Air blowing is used for most in-situ coal gasification in USSR. Trials using air enriched in oxygen for this purpose were conducted in 1953 and 1957 but did not find wider application. A station using oxygen enrichment technology is planned for Angren at the Apartak section, as cheaper oxygen production methods have emerged. A new concept for in-situ coal gasification using membrane technology (molecular sieves) is set out. This technology assures total chemical and power utilization of coal, yielding not only coal gas but also liquid nitrogen, hydrogen, a mixture of both these gases for ammonia production, and carbonic acid. Prospective site selection for in-situ coal gasification stations is discussed and conditions required for the respective coalfields are outlined.

  14. Control of start-up and dynamic braking of conveyors used for downhill transport in surface mines

    Energy Technology Data Exchange (ETDEWEB)

    Rosseger, A.; Borczyk, Z.; Kwater, M. (POLTEGOR Instytut, Wroclaw (Poland))

    1992-04-01

    Presents the structure of a microprocessor-aided control system for conveyors used in surface mines for downhill transport. Control of motor start-up and braking is performed in 8 speed stages. Permissible starting time duration is taken into consideration. The procedure of direct current braking is described. The microprocessor activates emergency braking by disc brakes if direct current braking is not sufficient. The system was implemented on four conveyors and has been used successfully since 1990.

  15. The potential for using wildflower species to increase natural habitat in contour surface mine reclamation

    Energy Technology Data Exchange (ETDEWEB)

    Heckman, J.R.; Sabre, M.; Cairns, J. Jr. [Virginia Tech, Blacksburg, VA (United States); Holl, K.D. [Univ. of California, Santa Cruz, CA (United States)

    1996-12-31

    While non-native herbaceous species are commonly used for mine reclamation, these species have low wildlife and aesthetic value and may inhibit long-term succession. The goal of this study was to determine the suitability of wildflowers for surface mine reclamation in the Appalachian mountains. A seed mixture composed of native and naturalized wildflower species was compared to the standard revegetation mixture by testing greenhouse germination rates of all species in both mine spoils and potting soil and establishing field plots at reclamation sites in southwestern Virginia. In May 1993, two 9-m{sup 2} (97-ft{sup 2}) plots were seeded with each revegetation mixture on four slopes with different aspects. Vegetation cover and composition were recorded in all plots during the 1993 and 1994 field seasons. Wildflower species had germination rates ranging from 0-52%. In field studies, all but 2 of the 14 species of wildflowers seeded became established in study plots, while only 4 of the 8 species in the standard mixture were recorded. Cover was highly variable among plots on different aspects seeded with the same mixture. In most cases, total vegetative cover did not differ significantly between plots seeded with different mixtures. Some native and naturalized wildflower species appear to have potential for use in mine reclamation and could be included with standard revegetation mixtures in order to provide more native diversity. However, further research is necessary due to a number of factors confounding these results, including the low seeding rates used, drought conditions during the 1993 field season, and problems with regrowth of previous vegetation.

  16. Mineral exploitation by surface mining and environmental restoration. Explotacion minera a cielo abierto y restauracion ambiental

    Energy Technology Data Exchange (ETDEWEB)

    1992-09-01

    The subject of environmental restoration of zones affected by the opencast exploitation of coal, is one of the most interesting for mineral zones since at the end of the industrial process the reclaimed land is appropriate for subsequent use. In all, HUNOSA has restored more than 1000 Ha of pasture. 1 fig.

  17. Coal-Mac, Inc. Phoenix No. 1 mine provides wildlife haven. 2007 Wildlife West Virginia Award

    Energy Technology Data Exchange (ETDEWEB)

    Skinner, A.

    2007-07-15

    Coal Mac, Inc.'s Harless Wood Industrial Park off Holden 22 Mines Road in Logan Country, West Virginia is an award-winning reclamation site in the mountains frequented by geese, wild turkey, deer and black bears. Orchard grass and rye is a temporary cover for the timothy, clover and other seedlings. The area was mined several years ago. Some 40,000-50,000 tons of coal per month are surfaced mined with the current permit that takes in 1,500-2,000 acres. After removing the coal, valleys are backfilled as part of the mining and reclamation plan. 10 photos.

  18. Habitat manipulation influences northern bobwhite resource selection on a reclaimed surface mine

    Science.gov (United States)

    Brooke, Jarred M.; Peters, David C.; Unger, Ashley M.; Tanner, Evan P.; Harper, Craig A.; Keyser, Patrick D.; Clark, Joseph D.; Morgan, John J.

    2015-01-01

    More than 600,000 ha of mine land have been reclaimed in the eastern United States, providing large contiguous tracts of early successional vegetation that can be managed for northern bobwhite (Colinus virginianus). However, habitat quality on reclaimed mine land can be limited by extensive coverage of non-native invasive species, which are commonly planted during reclamation. We used discrete-choice analysis to investigate bobwhite resource selection throughout the year on Peabody Wildlife Management Area, a 3,330-ha reclaimed surface mine in western Kentucky. We used a treatment-control design to study resource selection at 2 spatial scales to identify important aspects of mine land vegetation and whether resource selection differed between areas with habitat management (i.e., burning, disking, herbicide; treatment) and unmanaged units (control). Our objectives were to estimate bobwhite resource selection on reclaimed mine land and to estimate the influence of habitat management practices on resource selection. We used locations from 283 individuals during the breeding season (1 Apr–30 Sep) and 136 coveys during the non-breeding season (1 Oct–Mar 31) from August 2009 to March 2014. Individuals were located closer to shrub cover than would be expected at random throughout the year. During the breeding season, individuals on treatment units used areas with smaller contagion index values (i.e., greater interspersion) compared with individuals on control units. During the non-breeding season, birds selected areas with greater shrub-open edge density compared with random. At the microhabitat scale, individuals selected areas with increased visual obstruction >1 m aboveground. During the breeding season, birds were closer to disked areas (linear and non-linear) than would be expected at random. Individuals selected non-linear disked areas during winter but did not select linear disked areas (firebreaks) because they were planted to winter wheat each fall and

  19. Stability tables for opencast mining of coal and sedimentary deposits in inclined seams. Abacos de estabilidad para mineria de carbon y sedimentaria a cielo abierto con capas inclinadas

    Energy Technology Data Exchange (ETDEWEB)

    Ayala, F.J.; Granda, J.R.; Sarti, A.

    1985-01-01

    The six chapters of the book cover the following aspects of strata control in surface mining: design of opencast coal sites; parameters for the geomechanical design of opencast sites; methods for calculating slope stability; calculating the stability of spoil tips with a fractured cement base; calculation of stripping ratios; and stability tables.

  20. Spatio-Temporal Modelling of Dust Transport over Surface Mining Areas and Neighbouring Residential Zones

    Directory of Open Access Journals (Sweden)

    Eva Gulikova

    2008-06-01

    Full Text Available Projects focusing on spatio-temporal modelling of the living environment need to manage a wide range of terrain measurements, existing spatial data, time series, results of spatial analysis and inputs/outputs from numerical simulations. Thus, GISs are often used to manage data from remote sensors, to provide advanced spatial analysis and to integrate numerical models. In order to demonstrate the integration of spatial data, time series and methods in the framework of the GIS, we present a case study focused on the modelling of dust transport over a surface coal mining area, exploring spatial data from 3D laser scanners, GPS measurements, aerial images, time series of meteorological observations, inputs/outputs form numerical models and existing geographic resources. To achieve this, digital terrain models, layers including GPS thematic mapping, and scenes with simulation of wind flows are created to visualize and interpret coal dust transport over the mine area and a neighbouring residential zone. A temporary coal storage and sorting site, located near the residential zone, is one of the dominant sources of emissions. Using numerical simulations, the possible effects of wind flows are observed over the surface, modified by natural objects and man-made obstacles. The coal dust drifts with the wind in the direction of the residential zone and is partially deposited in this area. The simultaneous display of the digital map layers together with the location of the dominant emission source, wind flows and protected areas enables a risk assessment of the dust deposition in the area of interest to be performed. In order to obtain a more accurate simulation of wind flows over the temporary storage and sorting site, 3D laser scanning and GPS thematic mapping are used to create a more detailed digital terrain model. Thus, visualization of wind flows over the area of interest combined with 3D map layers enables the exploration of the processes of coal dust

  1. The environmental price tag on a ton of mountaintop removal coal.

    Directory of Open Access Journals (Sweden)

    Brian D Lutz

    Full Text Available While several thousand square kilometers of land area have been subject to surface mining in the Central Appalachians, no reliable estimate exists for how much coal is produced per unit landscape disturbance. We provide this estimate using regional satellite-derived mine delineations and historical county-level coal production data for the period 1985-2005, and further relate the aerial extent of mining disturbance to stream impairment and loss of ecosystem carbon sequestration potential. To meet current US coal demands, an area the size of Washington DC would need to be mined every 81 days. A one-year supply of coal would result in ∼2,300 km of stream impairment and a loss of ecosystem carbon sequestration capacity comparable to the global warming potential of >33,000 US homes. For the first time, the environmental impacts of surface coal mining can be directly scaled with coal production rates.

  2. The abandoned surface mining sites in the Czech Republic: mapping and creating a database with a GIS web application

    Science.gov (United States)

    Pokorný, Richard; Tereza Peterková, Marie

    2016-05-01

    Based on the vectorization of the 55-volume book series the Quarry Inventories of the Czechoslovak Republic/Czechoslovak Socialist Republic, published in the years 1932-1961, a new comprehensive database was built comprising 9958 surface mining sites of raw materials, which were active in the first half of the 20th century. The mapped area covers 40.9 % of the territory of the Czech Republic. For the purposes of visualization, a map application, the Quarry Inventories Online, was created that enables the data visualization.

  3. Evaluating the Use of Tree Shelters for Direct Seeding of Castanea on a Surface Mine in Appalachia

    Directory of Open Access Journals (Sweden)

    Christopher Barton

    2015-10-01

    Full Text Available American chestnut (Castanea dentata, once a primary constituent of the eastern hardwood forest ecosystem, was nearly extirpated from the forest canopy by the accidental introduction of chestnut blight (Cryphonectria parasitica. An intensive breeding program has sought to breed blight resistance from Chinese chestnut into American chestnuts, while maintaining as much of the desirable American chestnut phenotypes as possible. Previous studies suggest that these blight resistant American chestnuts, termed “restoration chestnuts”, are capable of thriving on reclaimed surface mines. We direct seeded pure Chinese, pure American, and three backcross lines into brown sandstone minesoil on a mine site in Pike County, KY. To investigate the effects of tree sheltering on survival and growth, we installed tree shelters on half the plots, and left the rest of the plots unsheltered. Results indicated that shelters were highly effective at reducing initial mortality. In addition, while pure Chinese chestnut survival was highest, the three backcross lines have also survived well on this site. Our study demonstrates that American, Chinese, and backcrossed chestnuts can survive through five growing seasons on reclaimed surface mines with the use of tree shelters.

  4. CO2 Sequestration Potential of Texas Low-Rank Coals

    Energy Technology Data Exchange (ETDEWEB)

    Duane A. McVay; Walter B. Ayers Jr; Jerry L. Jensen

    2003-07-01

    The objective of this project is to evaluate the feasibility of carbon dioxide (CO{sub 2}) sequestration in Texas low-rank coals and to determine the potential for enhanced coalbed methane (CBM) recovery as an added benefit of sequestration. The main objectives for this reporting period were to further characterize the three areas selected as potential test sites, to begin assessing regional attributes of natural coal fractures (cleats), which control coalbed permeability, and to interview laboratories for coal sample testing. An additional objective was to initiate discussions with an operating company that has interests in Texas coalbed gas production and CO{sub 2} sequestration potential, to determine their interest in participation and cost sharing in this project. Well-log data are critical for defining depth, thickness, number, and grouping of coal seams at the proposed sequestration sites. Therefore, we purchased 15 well logs from a commercial source to make coal-occurrence maps and cross sections. Log suites included gamma ray (GR), self potential (SP), resistivity, sonic, and density curves. Other properties of the coals in the selected areas were collected from published literature. To assess cleat properties and describe coal characteristics, we made field trips to a Jackson coal outcrop and visited Wilcox coal exposures at the Sandow surface mine. Coal samples at the Sandow mine were collected for CO{sub 2} and methane sorption analyses. We contacted several laboratories that specialize in analyzing coals and selected a laboratory, submitting the Sandow Wilcox coals for analysis. To address the issue of cost sharing, we had fruitful initial discussions with a petroleum corporation in Houston. We reviewed the objectives and status of this project, discussed data that they have already collected, and explored the potential for cooperative data acquisition and exchange in the future. We are pursuing a cooperative agreement with them.

  5. Fast and safe gas detection from underground coal fire by drone fly over.

    Science.gov (United States)

    Dunnington, Lucila; Nakagawa, Masami

    2017-10-01

    Underground coal fires start naturally or as a result of human activities. Besides burning away the important non-renewable energy resource and causing financial losses, burning coal seams emit carbon dioxide, carbon monoxide, sulfur oxide and methane, and is a leading cause of smog, acid rain, global warming, and air toxins. In the U.S. alone, the combined cost of coal-fire remediation projects that have been completed, budgeted, or projected by the U.S. Department of the Interior's Office of Surface Mining Remediation and Enforcement (OSM), exceeds $1 billion. It is estimated that these fires generate as much as 3% of the world's annual carbon dioxide emissions and consume as much as 5% of its minable coal. Considering the magnitude of environmental impact and economic loss caused by burning underground coal seams, we have developed a new, safe, reliable surface measurement of coal fire gases to assess the nature of underground coal fires. We use a drone mounted with gas sensors. Drone collected gas concentration data provides a safe alternative for evaluating the rank of a burning coal seam. In this study, a new method of determining coal rank by gas ratios is developed. Coal rank is valuable for defining parameters of a coal seam such as burn temperature, burn rate, and volume of burning seam. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. The role of the existing utilities (continuing dominance of coal in Indian power industry)

    Energy Technology Data Exchange (ETDEWEB)

    Shahi, R.V. [BSES Ltd. (India)

    1997-12-31

    The consumption of coal for power generation in India has increased from 10 million tonnes in 1960-61 to 200 million tonnes in 1996-97. The increased demand has been met largely through an increase in surface mining. However, the Gross Calorific Value of the coal has declined from 5900 kcal/kg in 1960-61 to an estimated 3500 kcal/kg in 1995-96. Indian power stations have to use coal with ash contents of 30% to 40% and even up to 45%. There is a need for additional coal washeries. Coal India Ltd and the Ministry of Coal have been identifying agencies to beneficiate coal. BSES with assistance from USAID under the PACER programme, is building a coal washery at its 500 MW power plant at Dahanu which will both wash coal for the power plant and act as a test facility to investigate different levels of beneficiation. The plant should be operational in September 1998. The problems Indian Railways have with the volume of coal transported and possible solutions (eg increased maritime transportation or coal slurry pipelines) are also discussed. Beneficiation prior to transport may overcome some of these problems. The management of ash disposal is also discussed.

  7. RECULTIVATION AND SUSTAINABLE DEVELOPMENT OF COAL MINING IN KOLUBARA BASIN

    Directory of Open Access Journals (Sweden)

    Ivica M Ristović

    2010-01-01

    Full Text Available Coal plays a fundamental role in global development, but the coal mining industry exerts impact on the environment, society and economy. Kolubara Coal Company produces about 30 million tonnes of coal, and digs about 70 million m3 of overburden per year. The main result of surface coal is certainly taking agricultural land, so that surface mines, which affect large areas in Kolubara, about 100 hectars a year, causing a number of problems related to the recultivation of degraded area after coal extraction. The lignite extraction through the method of opencast mining in Kolubara is about 60 years old. The previous exploitation usage is characterised by the fact that the disposal of overburden is made non-selectively, whereas the surface solum is not being preserved. The recultivation is carried out in parallel with overburden excavation. It is necessary to preserve the fertile solum through selective excavation in order to bring the soil back to its previous purpose - agricultural production. The objective of this paper is mainly to point out the need for the further expansion of the utilisation of fossil fuels, which in turn reduces the emission of CO2, and thus reduces or prevents global climate changes on Earth. In addition to that, bringing back deteriorated terrains to their previous purpose - agricultural production, or the afforestation - contributes to the maintenance of ecological balance in nature, which then makes coal mining sustainable.

  8. Thirty five years of North Bohemian brown coal region after liberation of Czechoslovakia by the Soviet army

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, M.

    1980-09-01

    Problems of the North Bohemian brown coal basin are evaluated. In 35 years coal output of the region increased from 40 Mt to nearly 70 Mt in spite of deteriorating mining and geological conditions and shortages of manpower. Output increase was possible as a result of a comprehensive program of modernization and construction of new mines. The following mines are the most productive in the region: Maxim Gorkij, Most, CSA, Jan Sverma, Chabarovice, Merkur, Brezno, Vrsany. Investments in modernizing older mines and constructing new surface mines are evaluated: the investments increased from close to 800 million crowns in 1971 to over 2 billion crowns in 1979. Machines and equipment used in the North Bohemian surface mines are characterized: K 1000, K-800-B, K-300 bucket wheel excavators, D 800, DO 800 and DO 400 bucket chain excavators as well as the high capacity KU 800 bucket wheel excavator.

  9. Method for stabilizing quality of coal extracted from seams with a complicated structure

    Energy Technology Data Exchange (ETDEWEB)

    Belyakov, Yu.I.; Pushkin, S.P. (Kievskii Inzhenerno-Stroitel' nyi Institut (Ukraine))

    1992-02-01

    Discusses methods for stabilizing coal quality (ash content) under conditions of complicated coal deposit structure (coal seams separated by thin rock layers). Computerized simulation of operation of a set of equipment for coal surface mining and mine haulage (bucket wheel excavators, locomotives and mine cars) is discussed. Output of individual excavators, ash content in coal from the face mined by each excavator and effects of coal mixing during haulage and handling on fluctuations of ash content in run-of-mine coal are analyzed. Computerized simulation shows that under conditions of the Ehkibastuz an optimum system for coal mixing and haulage should consist of bucket wheel excavators with output reserves ranging from 10 to 20% and haulage systems with 4 to 5 reserve train routes to coal yards. Such a system guarantees a reduction of ash content (mean square deviation) by 30-35%, reduction of idle time of mine cars by 35-40% and reduction of coal mining cost by 4-6%. 3 refs.

  10. Report on the 1997 Coal Engineer Training Program General Course Training; 1997 nendo sekitan gijutsusha yosei jigyo ippan course kenshu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    The paper reported training in the fiscal 1997 coal engineer training course. The training was made in a period from June 9 to November 12 in terms of actual training, English training, joint seminar, visits to the related facilities in Japan, overseas training, etc. for 10 engineers from mining companies, oil companies and electric power companies. In the actual training, the following lectures were given at International Resource University in Akita prefecture: coal exploration technology, coal situation of Australia, physical/chemical characteristics of coal and the application, coal preparation technology, coal situation in India, coal situation in the U.S., trend of general coal demand, coal situation in China, coal mining technology, actual surface mining technology, coal situation in Canada, commercial English, trend of raw coal demand, coal geology, environmental protection technology related to coal utilization, etc. Overseas training, which was divided into an Australia group and a Canada/America group, was conducted for about a month. Training in Indonesia was canceled because of a large scale forest fire which broke out immediately before the start. 88 figs., 52 tabs.

  11. Temporal and spatial changes of land use and landscape in a coal mining area in Xilingol grassland

    Science.gov (United States)

    Guan, Chunzhu; Zhang, Baolin; Li, Jiannan; Zhao, Junling

    2017-01-01

    Coal mining, particularly surface mining, inevitably disturbs land. According to Landsat images acquired over Xilingol grassland in 2005, 2009 and 2015, land uses were divided into seven classes, i. e., open stope, stripping area, waste-dump area, mine industrial area, farmland, urban area and the original landscape (grassland), using supervised classification and human-computer interactive interpretation. The overall classification accuracies were 97.72 %, 98.43 % and 96.73 %, respectively; the Kappa coefficients were 0.95, 0.97 and 0.95, respectively. Analysis on LUCC (Land Use and Cover Change) showed that surface coal mining disturbed grassland ecosystem: grassland decreased by 8661.15 hm2 in 2005-2015. The area and proportion of mining operation areas (open stope, stripping area, waste-dump area, mine industrial field) increased, but those of grassland decreased continuously. Transfer matrix of land use changes showed that waste-dump had the largest impacts in mining disturbance, and that effective reclamation of waste-dump areas would mitigate eco-environment destruction, as would be of great significance to protect fragile grassland eco-system. Six landscape index showed that landscape fragmentation increased, and the influences of human activity on landscape was mainly reflected in the expansion of mining area and urban area. Remote sensing monitoring of coal surface mining in grassland would accurately demonstrate the dynamics and trend of LUCC, providing scientific supports for ecological reconstruction in surface mining area.

  12. COAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>20141574 Chen Hao(Exploration and Development Research Institute,Daqing Oilfield Company,Daqing 163712,China)High-Resolution Sequences and Coal Accumulating Laws in Nantun Formation of Huhe Lake Sag(Petroleum Geology&Oilfield Development in Daqing,ISSN1000-3754,CN23-1286/TQ,32(4),2013,p.15-19,5 illus.,15 refs.)Key words:coal accumulation regularity,coal

  13. COAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>20091159 Gao Yan(No.3 Prospecting Team of Anhui Bureau of Coal Geology,Suzhou 234000,China) Effect of Depositional Environment of Coal-Bearing Stratum on Major Coal Seams in Suntan Coalmine,Anhui Province(Geology of Anhui,ISSN 1005- 6157,CN34-1111/P,18(2),2008,p.114 -117,5 illus.,1 ref.,with English abstract)

  14. Monitoring light hydrocarbons in Brazilian coal mines and in confined coal samples

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Rosangela [Pos-Graduation Program in Materials Engineering and Technology, Pontifical Catholic University of Rio Grande do Sul, Porto Alegre (Brazil); Pires, Marcal [Pos-Graduation Program in Materials Engineering and Technology, Pontifical Catholic University of Rio Grande do Sul, Porto Alegre (Brazil); Faculty of Chemistry, Pontifical Catholic University of Rio Grande do Sul, Porto Alegre (Brazil); Azevedo, Carla M.N. [Faculty of Chemistry, Pontifical Catholic University of Rio Grande do Sul, Porto Alegre (Brazil); Fagundes, Leandro [P and D Consultoria (Brazil); Garavaglia, Luciane; Gomes, Cleber J.B. [SATC, Associacao Beneficente da Industria Carbonifera de Santa Catarina, CTCL, Technological Center of Clean Coal (Brazil)

    2010-12-01

    Monitoring light hydrocarbons (LHCs) in coal mines, particularly methane, is important not only because of their implications for global climate change but also for economic and safety reasons. Furthermore, the identification and quantification of LHCs in coal mine air samples and desorbed from confined coal may contribute to a better understanding of coal seam characteristics. The paucity of information about the levels of methane in Brazilian underground coal mines can be attributed to their difficult access and a lack of adequate procedures for correct gas sampling. The aim of this study is to optimize and apply standard gas chromatography procedures to determine LHC levels in the air of coal mines and in confined coal from five mines under operation, three underground (A, B, C) and two surface (D, E) mines, in southern Brazil. The results indicate methane (C{sub 1}) levels varying from 3 ppm to 27% in the atmosphere of the underground mines. Mine A presented high levels of all LHCs analyzed (C{sub 1} to C{sub 5}), while only C{sub 1} and C{sub 2} were detected in mine B, and hydrocarbons ranging from C{sub 1} to C{sub 4} were found in mine C. On the other hand, surface mines presented narrow concentration range for C{sub 1} (3 ppm to 470 ppm) and C{sub 2}-C{sub 3}, with higher levels observed for puncture explosive points. Among LHCs, methane is desorbed in higher concentrations from confined coals and the presence of C{sub 2} was detected in all samples while C{sub 3}-C{sub 5} were only observed in coals from underground mines. These data are consistent with those obtained from the air gas samples collected in the mines under study. Geological events such as faulting and intrusions can accelerate the release of gas or the trapping of large amounts of previously released methane. The LHC emissions from coal mines were found to be highly variable, indicating the need for a comprehensive survey of Brazilian coal mine emissions. (author)

  15. COAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    <正>20131668 Chang Huizhen(Key Laboratory of Coalbed Methane Resources and Reservoir Formation Process,CUMT,Ministry of Edu-cation,School of Resource and Earth Science,China University of Mining and Technology,Xuzhou 221008,China);Qin Yong Differences in of Pore Structure of Coals and Their Impact on the Permeability of Coals from the

  16. Changes in the Extent of Surface Mining and Reclamation in the Central Appalachians Detected Using a 1976-2006 Landsat Time Series

    Science.gov (United States)

    Townsend, Philip A.; Helmers, David P.; Kingdon, Clayton C.; McNeil, Brenden E.; de Beurs, Kirsten M.; Eshleman, Keith N.

    2009-01-01

    Surface mining and reclamation is the dominant driver of land cover land use change (LCLUC) in the Central Appalachian Mountain region of the Eastern U.S. Accurate quantification of the extent of mining activities is important for assessing how this LCLUC affects ecosystem services such as aesthetics, biodiversity, and mitigation of flooding.We used Landsat imagery from 1976, 1987, 1999 and 2006 to map the extent of surface mines and mine reclamation for eight large watersheds in the Central Appalachian region of West Virginia, Maryland and Pennsylvania. We employed standard image processing techniques in conjunction with a temporal decision tree and GIS maps of mine permits and wetlands to map active and reclaimed mines and track changes through time. For the entire study area, active surface mine extent was highest in 1976, prior to implementation of the Surface Mine Control and Reclamation Act in 1977, with 1.76% of the study area in active mines, declining to 0.44% in 2006. The most extensively mined watershed, Georges Creek in Maryland, was 5.45% active mines in 1976, declining to 1.83% in 2006. For the entire study area, the area of reclaimed mines increased from 1.35% to 4.99% from 1976 to 2006, and from 4.71% to 15.42% in Georges Creek. Land cover conversion to mines and then reclaimed mines after 1976 was almost exclusively from forest. Accuracy levels for mined and reclaimed cover was above 85% for all time periods, and was generally above 80% for mapping active and reclaimed mines separately, especially for the later time periods in which good accuracy assessment data were available. Among other implications, the mapped patterns of LCLUC are likely to significantly affect watershed hydrology, as mined and reclaimed areas have lower infiltration capacity and thus more rapid runoff than unmined forest watersheds, leading to greater potential for extreme flooding during heavy rainfall events.

  17. Changes in the Extent of Surface Mining and Reclamation in the Central Appalachians Detected Using a 1976-2006 Landsat Time Series

    Science.gov (United States)

    Townsend, Philip A.; Helmers, David P.; Kingdon, Clayton C.; McNeil, Brenden E.; de Beurs, Kirsten M.; Eshleman, Keith N.

    2009-01-01

    Surface mining and reclamation is the dominant driver of land cover land use change (LCLUC) in the Central Appalachian Mountain region of the Eastern U.S. Accurate quantification of the extent of mining activities is important for assessing how this LCLUC affects ecosystem services such as aesthetics, biodiversity, and mitigation of flooding.We used Landsat imagery from 1976, 1987, 1999 and 2006 to map the extent of surface mines and mine reclamation for eight large watersheds in the Central Appalachian region of West Virginia, Maryland and Pennsylvania. We employed standard image processing techniques in conjunction with a temporal decision tree and GIS maps of mine permits and wetlands to map active and reclaimed mines and track changes through time. For the entire study area, active surface mine extent was highest in 1976, prior to implementation of the Surface Mine Control and Reclamation Act in 1977, with 1.76% of the study area in active mines, declining to 0.44% in 2006. The most extensively mined watershed, Georges Creek in Maryland, was 5.45% active mines in 1976, declining to 1.83% in 2006. For the entire study area, the area of reclaimed mines increased from 1.35% to 4.99% from 1976 to 2006, and from 4.71% to 15.42% in Georges Creek. Land cover conversion to mines and then reclaimed mines after 1976 was almost exclusively from forest. Accuracy levels for mined and reclaimed cover was above 85% for all time periods, and was generally above 80% for mapping active and reclaimed mines separately, especially for the later time periods in which good accuracy assessment data were available. Among other implications, the mapped patterns of LCLUC are likely to significantly affect watershed hydrology, as mined and reclaimed areas have lower infiltration capacity and thus more rapid runoff than unmined forest watersheds, leading to greater potential for extreme flooding during heavy rainfall events.

  18. Establishing Pine Monocultures and Mixed Pine-Hardwood Stands on Reclaimed Surface Mined Land in Eastern Kentucky: Implications for Forest Resilience in a Changing Climate

    Directory of Open Access Journals (Sweden)

    Geoffrey Bell

    2017-10-01

    Full Text Available Surface mining and mine reclamation practices have caused significant forest loss and forest fragmentation in Appalachia. Shortleaf pine (Pinus echinata is threatened by a variety of stresses, including diseases, pests, poor management, altered fire regimes, and climate change, and the species is the subject of a widescale restoration effort. Surface mines may present opportunity for shortleaf pine restoration; however, the survival and growth of shortleaf pine on these harsh sites has not been critically evaluated. This paper presents first-year survival and growth of native shortleaf pine planted on a reclaimed surface mine, compared to non-native loblolly pine (Pinus taeda, which has been highly successful in previous mined land reclamation plantings. Pine monoculture plots are also compared to pine-hardwood polyculture plots to evaluate effects of planting mix on tree growth and survival, as well as soil health. Initial survival of shortleaf pine is low (42%, but height growth is similar to that of loblolly pine. No differences in survival or growth were observed between monoculture and polyculture treatments. Additional surveys in coming years will address longer-term growth and survival patterns of these species, as well as changes to relevant soil health endpoints, such as soil carbon.

  19. Preliminary evaluation of the coal resources for part of the Wilcox Group (Paleocene through Eocene), central Texas

    Science.gov (United States)

    Warwick, Peter D.; Aubourg, Claire E.; Suitt, Stephen E.; Podwysocki, Steven M.; Schultz, Adam C.

    2002-01-01

    The Wilcox Group of central Texas contains shallow (Wilcox Group in central Texas (figs. 1 and 2). Approximately 1,800 subsurface stratigraphic records from rotary and core drill holes were used to assess the resources of the central Texas assessment area. Of the 1,800 drill holes, only 168 are public data points and are primarily located in the areas that have been permitted for surface mining (fig. 2; Appendix 1). The remaining 1632 drill holes, which are distributed throughout the assessment area, were provided to the U.S. Geological Survey (USGS) on a confidential basis by various coal companies for use in regional studies. Nine coal zones were identified and assessed in the central Texas assessment area. Several other coal zones (as many as 9 unassessed zones) were identified but were not assessed due to the thinness of the coal beds or the lack of deep stratigraphic data (fig. 3). A total of 7.7 billion short tons of coal was identified in this assessment that excluded the resources within current coal mine lease areas (fig. 2). Corresponding maps were constructed to show the overburden, structure contour of the top of the coal zone, and cumulative coal-zone thickness for each of the nine coal zones. Warwick and Crowley (1995) offer a discussion of the general geologic setting and stratigraphy of the central Texas study area, and Tewalt (1986) presents a discussion of the coal quality aspects of the central Texas study area.

  20. COAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    <正>20111053 Chen Jian(School of Earth and Environment,Anhui University of Science and Technology,Huainan 232001,China);Liu Wenzhong Organic Affinity of Trace Elements in Coal from No.10 Coal-Bed at Western Huagou,Guoyang(Coal Geology & Exploration,ISSN1001-1986,CN61-1155/P,38(4),2010,p.16-20,24,3 illus.,3 tables,19 refs.)Key words:coal,minor elements,Anhui Province In order to study the organic affinity of trace elements in coal from No.10 coal-bed at western Huagou,Guoyang,10 borehole samples were collected at exploration area of Huaibei mining area.The contents of 12 kinds of trace elements were determined by the inductively coupled plasma mass spectrometry(ICP-MS),the total organic carbon(TOC)of coal was determined by LECO carbon and sulfur analyzer,and the organic affinity of trace elements were deduced from the correlations between contents and TOCs.The results showed that the contents of V,Cr,Co,Ni,Mo,Cd,Sb,Pb and Zn were lower than

  1. Priority pollutants and associated constituents in untreated and treated discharges from coal mining or processing facilities in Pennsylvania, USA

    Science.gov (United States)

    Cravotta, III, Charles A.; Keith B.C. Brady,

    2015-01-01

    Clean sampling and analysis procedures were used to quantify more than 70 inorganic constituents, including 35 potentially toxic or hazardous constituents, organic carbon, and other characteristics of untreated (influent) and treated (effluent) coal-mine discharges (CMD) at 38 permitted coal-mining or coal-processing facilities in the bituminous coalfield and 4 facilities in the anthracite coalfield of Pennsylvania. Of the 42 facilities sampled during 2011, 26 were surface mines, 11 were underground mines, and 5 were coal refuse disposal operations. Treatment of CMD with caustic soda (NaOH), lime (CaO or Ca(OH)2), flocculent, or limestone was ongoing at 21%, 40%, 6%, and 4% of the facilities, respectively; no chemicals were added at the remaining facilities. All facilities with CMD treatment incorporated structures for active or passive aeration and settling of metal-rich precipitate.

  2. Overview of the effects of the coal fuel cycle on hydrology, water quality and use, and aquatic ecology

    Energy Technology Data Exchange (ETDEWEB)

    Cushman, R.M.; Gough, S.B.; Moran, M.S.

    1980-05-01

    Literature is summarized for the effects of the coal fuel cycle (mining, mine-site processing, transportation, storage, onsite processing, combustion, and waste collection and disposal) on water resources. Aspects considered include surface- and ground-water hydrology, water quality and use, and aquatic ecology. Water use is discussed with regard to both availability and water quality constraints on use. Requirements of the recently enacted Surface Mining Control and Reclamation Act are introduced where appropriate. For the combustion step in the fuel cycle, only those effects which are specific to coal as a fuel are addressed. Effects not specific to coal use (such as thermal effects, impingement, and entrainment resulting from cooling water withdrawal and use) are not considered. Reference is made to more exhaustive studies of the topics reviewed. A summary of the major environmental effects of the coal fuel cycle is given below.

  3. British coal

    Energy Technology Data Exchange (ETDEWEB)

    Forrest, M.

    2009-03-15

    The paper describes a visit to UK's Daw Mill in north Warwickshire to find out about a planned expansion of the coal mine. Daw Mill, 10 km west of Coventry is the UK's largest underground coal mine. The coal is extracted by an Eckhoff Sl500 coal shearer that traverses the coalface. Overarching the shearer is a series of electro-hydraulically operated powered roof supports (PRS) over the roof and coalface that are advanced forward after each pass of the shearer. The void behind the PRS is then allowed to collapse. The coalface is currently 295 m long, but there are plans to extend the replacement coalface to 357 m. Under the shearer is an armored face conveyor (AFC) that receives and transports the coal along the coalface and deposits it onto the beam stage loader, which sits at 90{sup o} to the AFC. The coal is turned by a deflector plough on the AFC headframe and is transferred to the belt conveyor to begin its journey out of the mine. Last year two significant records were broken at Daw Mill - the fastest million tonnes achieved and the European record for a single face of 3.2 Mt. The 300s area of the mine has already been mapped out and development teams are constructing roadways to facilitate more mining. To maintain annual production in excess of three million tonnes will require at least 5,000 m of roadways to access the coal, and install equipment. These investments are supported by proven reserves. Seismic surveys and borehole drilling has shown approximately 20 Mt of extractable coal in the 300s area which extends over 15 km{sup 2}. These panels will be the next to be mined in a sequence that extends to 2014. 2 photos.

  4. Coal mining: coal in Spain

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Arguelles Martinez, A.; Lugue Cabal, V.

    1984-01-01

    The Survey of Spanish Coal Resources published by the Centre for Energy Studies in 1979 is without doubt the most serious and full study on this subject. The coal boom of the last few years and the important role it will play in the future, as well as the wealth of new information which has come to light in the research carried out in Spanish coalfields by both the public and private sector, prompted the General Mine Management of the Ministry of Industry and Energy to commission IGME to review and update the previous Survey of Spanish Coal Resources of November 1981.

  5. Coal Fires in the United States: A Case Study in Government Inattention

    Science.gov (United States)

    McCurdy, K. M.

    2006-12-01

    Coal fires occur in all coal producing nations. Like most other environmental problems fires are not confined by political boundaries. Important economic coal seams in the United States are found across the Inter-montaine west, the Midwest, and Appalachia. The age of these deposits differs, as does the grade and sulfur content of the coal, the mining techniques utilized for exploitation of this resource, and the markets in which the coal is traded. Coal fires are ordinary occurrences under extraordinary conditions. Every coal bed exposed in an underground or surface mine has the potential to ignite. These fires are spread thinly over the political geography and over time, so that constituencies rarely coalesce to petition government to address the coal fire problem. Coal fires produce serious problems with long term consequences for society. They threaten mine safety, consume a non-renewable resource, and produce toxic gases with serious health effects for local populations. Additionally, as coal production in the developing world intensifies, these problems worsen. The lack of government attention to coal fires is due to the confluence of at least four independent political factors: 1) The separated powers, federated system in which decisions in the United States are made; 2) Low levels of political energy available in Congress to be expended on coal fires, measured by the magnitude of legislative majorities and seniority; 3) The mid-twentieth century model of scientific and technical information moving indirectly to legislators through the bureaucratic agencies; 4) The chronic and diffuse nature of fires across space and time.

  6. Blended coals for improved coal water slurries

    Institute of Scientific and Technical Information of China (English)

    GU Tian-ye; WU Guo-guang; LI Qi-hui; SUN Zhi-qiang; ZENG Fang; WANG Guang-you; MENG Xian-liang

    2008-01-01

    Three coal samples of different ranks were used to study the effect of coal blending on the preparation of Coal Water Slurry (CWS). The results show that by taking advantage of two kinds of coal, the coal concentration in slurry made from hard-to-pulp coal can be effectively improved and increased by 3%-5% generally. DLT coal (DaLiuTa coal mine) is very poor in slurryability and the stability and rheology of the resulting slurry are not very good. When the amount of easily slurried coal is more than 30%, all properties of the CWS improve and the CWS meets the requirements for use as fuel. Coalification, porosity, surface oxygenic functional groups, zeta potential and grindability have a great effect on the performance of blended coal CWS. This leads to some differences in performance between the slurry made from a single coal and slurry made from blended coal.

  7. A Comparison of Machine Learning Algorithms for Mapping of Complex Surface-Mined and Agricultural Landscapes Using ZiYuan-3 Stereo Satellite Imagery

    Directory of Open Access Journals (Sweden)

    Xianju Li

    2016-06-01

    Full Text Available Land cover mapping (LCM in complex surface-mined and agricultural landscapes could contribute greatly to regulating mine exploitation and protecting mine geo-environments. However, there are some special and spectrally similar land covers in these landscapes which increase the difficulty in LCM when employing high spatial resolution images. There is currently no research on these mixed complex landscapes. The present study focused on LCM in such a mixed complex landscape located in Wuhan City, China. A procedure combining ZiYuan-3 (ZY-3 stereo satellite imagery, the feature selection (FS method, and machine learning algorithms (MLAs (random forest, RF; support vector machine, SVM; artificial neural network, ANN was proposed and first examined for both LCM of surface-mined and agricultural landscapes (MSMAL and classification of surface-mined land (CSML, respectively. The mean and standard deviation filters of spectral bands and topographic features derived from ZY-3 stereo images were newly introduced. Comparisons of three MLAs, including their sensitivities to FS and whether FS resulted in significant influences, were conducted for the first time in the present study. The following conclusions are drawn. Textures were of little use, and the novel features contributed to improve classification accuracy. Regarding the influence of FS: FS substantially reduced feature set (by 68% for MSMAL and 87% for CSML, and often improved classification accuracies (with an average value of 4.48% for MSMAL using three MLAs, and 11.39% for CSML using RF and SVM; FS showed statistically significant improvements except for ANN-based MSMAL; SVM was most sensitive to FS, followed by ANN and RF. Regarding comparisons of MLAs: for MSMAL based on feature subset, RF achieved the greatest overall accuracy of 77.57%, followed by SVM and ANN; for CSML, SVM had the highest accuracies (87.34%, followed by RF and ANN; based on the feature subsets, significant differences were

  8. COAL GEOLOGY

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>20091749 Cai Hou’an(College of Energy Geology,China University of Geosciences,Beijing 100083,China);Xu Debin SHRIMP U-Pb Isotope Age of Volcanic Rocks Distributed in the Badaohao Area,Liaoning Province and Its Significance(Coal Geology & Exploration,ISSN1001-1986,CN61-1155/P,36(4),2008,p.17-20,2 illus.,1 table,16 refs.)Key words:coal measures,volcanic rocks,U-Pb dating,LiaoningA set of andesite volcanic rocks distributes in the Badaohao area in Heishan County,Liaoning Province.It’s geological age and stratigraphy sequence relationship between the Lower Cretaceous Badaohao Formation and the volcanic rocks can not make sure till now and is influencing the further prospect for coals.Zircon

  9. NuCoal CTL wood mountain project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-09-15

    The province of Saskatchewan experienced significant growth between 2005 and 2008. The growing economy included an abundance of different commodities and made Saskatchewan the newest hub for the latest technologies and investment. This report outlined the various opportunities in Saskatchewan for a coal to liquids plant and its technologies. The coal from southern Saskatchewan is generally lignite, which is found in the Ravenscrag Formation near the Big Muddy Badlands. The report discussed the Ravenscrag Formation as well as mining activity that was largely concentrated near Estevan and Bienfait in southeastern Saskatchewan, where Sherritt International operated two surface mines. The Coronach Poplar River Power Station, located 10 kilometres north of the Canada-United States border in southern Saskatchewan was also discussed. Population density, labour, land use, First Nations, and proximity to major centres were factors that were discussed. The programs that were identified included the Saskatchewan immigrant nominee program, an alternative program to the Canadian federal immigration program for those who want to come to Saskatchewan as a permanent resident of Canada; the Weyburn-Midale carbon dioxide project, the world's first carbon dioxide measuring, monitoring and verification initiative; and the Federated Co-op in Regina, a 100,000 barrel/day refinery located close to the Coronach area in Saskatchewan. Political climate, access to the electrical grid, access to water, access to major pipelines, access to rail lines, and access to highways were other topics that were presented. It was concluded that southern Saskatchewan had a broad range of opportunities for a coal to liquids plant. The area has numerous advantages including access to rail and pipelines. refs., tabs., figs., appendices.

  10. Coal industry annual 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-01

    Coal Industry Annual 1997 provides comprehensive information about US coal production, number of mines, prices, productivity, employment, productive capacity, and recoverable reserves. US Coal production for 1997 and previous years is based on the annual survey EIA-7A, Coal Production Report. This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report includes a national total coal consumption for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. 14 figs., 145 tabs.

  11. Coal Industry Annual 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    This report presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 21 million short tons for 1995.

  12. Coal industry annual 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    This report presents data on coal consumption, coal distribution, coal stocks, coal prices, and coal quality, and emissions for Congress, Federal and State agencies, the coal industry, and the general public. Appendix A contains a compilation of coal statistics for the major coal-producing States.This report does not include coal consumption data for nonutility power producers that are not in the manufacturing, agriculture, mining, construction, or commercial sectors. Consumption for nonutility power producers not included in this report is estimated to be 24 million short tons for 1996. 14 figs., 145 tabs.

  13. Coal industry annual 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-06

    Coal Industry Annual 1993 replaces the publication Coal Production (DOE/FIA-0125). This report presents additional tables and expanded versions of tables previously presented in Coal Production, including production, number of mines, Productivity, employment, productive capacity, and recoverable reserves. This report also presents data on coal consumption, coal distribution, coal stocks, coal prices, coal quality, and emissions for a wide audience including the Congress, Federal and State agencies, the coal industry, and the general public. In addition, Appendix A contains a compilation of coal statistics for the major coal-producing States. This report does not include coal consumption data for nonutility Power Producers who are not in the manufacturing, agriculture, mining, construction, or commercial sectors. This consumption is estimated to be 5 million short tons in 1993.

  14. Coal - proximate analysis

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-06-14

    This Standard establishes a practice for the proximate analysis of coal, that is, the coal is analysed for the content of moisture, ash and volatile matter; fixed carbon is calculated. The standard provides a basis for the comparison of coals.

  15. Development of new bond release criteria for surface coal mines in the eastern and interior coal provinces of the United States. Open file report (final) 18 jul 77-18 jul 78

    Energy Technology Data Exchange (ETDEWEB)

    Knuth, W.M.; Fritz, E.L.; Schad, J.A.; Nagle, W.F.

    1978-09-18

    This study involved a review of bonding and bond release practices in the States of the eastern and midwestern coal provinces. Data was collected from regulatory authorities and site visits to document the bonding and release procedures in the States related to achieving successful reclamation. The regulations related to PL95-87 were reviewed. The analysis included suggested modified or new bond release criteria based on a review of applicable bond release inspection techniques, a conceptual graduated bonding system, and incentive procedures for reclamation of surface mine sites to alternative or higher land uses.

  16. Evolutionary or fragmented environmental policy making? coal, power, and agriculture in the Hunter Valley, Australia

    Science.gov (United States)

    Day, Diana G.

    1988-05-01

    Intensified surface mining, power generation, and smelting operations in the Hunter River lowlands, NSW, Australia have posed numerous new environmental management problems. Legislative controls over water, soils, and land use management have been clearly insufficient and remain so. The complex range of environmental changes is challenging government agencies as well as coal developers. While water demands are increasing in the region the proportionally greatest competitors are power generation and irrigation. Comprehensive regional water quality assessment is inadequate and divided between a number of agencies with fragmentary interests. Coal development inquiries signal further controversy over appropriate management solutions and are an ongoing phenomenon in the region. The early 1980s resource boom has been followed by lower rates of economic growth, which have resulted in disparate agency responses to major ongoing environmental questions. While issue attention cycles are often remarkably short in environmental management, matters of water, land, and air quality require intensive and ongoing monitoring and policy development.

  17. Comparative analysis of plant and macroinvertebrate communities and toxic metal concentrations at an abandoned surface mine in Grant County, West Virginia. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    The document reports on the sampling of vegetation, utilizing list-count quadrats along predetermined transects within 3 major areas of Allison Engineering surface mine. Quadrats, 1/4 x m, were utilized to sample the herbaceous and ground strata. Vegetation was assessed according to percent cover, using 5 classes of cover to maintain objectivity. Sampling of vegetation within the Southern Section corresponded with sample sites. Sampling of vegetation within Middle Section was conducted to add to the data regarding vegetation influencing the Southern Section and the Northern Section Sampling of vegetation of Northern Section deviated from that of other sections (sampling not as random). Vegetative data from sections were analyzed by standard methods for cover (dominance) and frequency. A floristic list of the vascular plants surveyed/collected within sections categorized (pteridophytes, angiosperms-monocots, and angiosperms-dicots).

  18. Queensland coal inventory

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-04-01

    Australia's black coal resources rank in the top five globally, around 50% of which are located in the sedimentary basins of Queensland. The Bowen Basin is the most prolific coal repository, hosting over 60% of the currently established resource inventory. Large volumes of thermal coal are present in the Surat and Galilee basins as well as small extensional and pull apart basins such as Blair Athol and Tarong. The article examines Queensland's coal industry from a government perspective. It first discusses the current coal market, then introduces the concept of inventory coal and explains the Australia Joint Ore Reserves Committee (JORC) code - a resource evaluation system. The stratigraphy of each of Queensland's coal basins is then discussed in sections headed Permian coals, Triassic coals, Jurassic and Cretaceous coals, and Tertiary coals. 3 figs.

  19. Impact of using paper mill sludge for surface-mine reclamation on runoff water quality and plant growth

    Energy Technology Data Exchange (ETDEWEB)

    Shipitalo, M.J.; Bonta, J.V. [USDA ARS, Coshocton, OH (United States)

    2008-11-15

    Paper mills generate large amounts of solid waste consisting of fibrous cellulose, clay, and lime. Paper mill Sludge (PMS) can improve reclamation of surface-coal mines where low pH and organic-carbon levels in the spoil cover material can inhibit revegetation. When applied at high rates, however, PMS may adversely impact the quality of surface runoff. Therefore, we applied PMS at 0, 224, and 672 dry Mg ha{sup -1} to 22.1 x 4.6-m plots at a recently mined site and monitored runoff for a total of 13 mo. The zero-rate plots served as controls and received standard reclamation consisting of mulching with hay and fertilization at planting. Compared to the control plots, PMS reduced runoff fourfold to sixfold and decreased erosion from 47 Mg ha{sup -1} to < 1 Mg ha{sup -1}. Most of the reduction occurred in the 2.5 mo before the plots were planted. Flow-weighted average dissolved oxygen concentrations in runoff from plots at the 224 and 672 Mg ha{sup -1} rates, however, were much lower ({<=} 0.4 vs. 8.2 mg L{sup -1}) and chemical oxygen demand (COD) was much higher for the 672 Mg ha{sup -1} rate plots than the control plots during the pre-plant period (7229 vs. 880 mg L{sup -1}). There were few noteworthy differences in water quality among treatments post-planting, but plant dry-matter yields were greater for the PMS plots than for the controls. The 672 Mg ha{sup -1} rate did not increase COD or nutrient loads compared to the 224 Mg ha{sup -1} rate and may have more persistent beneficial effects by increasing soil organic carbon levels and pH to a greater extent.

  20. Advanced geophysical underground coal gasification monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Mellors, Robert; Yang, X.; White, J. A.; Ramirez, A.; Wagoner, J.; Camp, D. W.

    2014-07-01

    Underground Coal Gasification (UCG) produces less surface impact, atmospheric pollutants and greenhouse gas than traditional surface mining and combustion. Therefore, it may be useful in mitigating global change caused by anthropogenic activities. Careful monitoring of the UCG process is essential in minimizing environmental impact. Here we first summarize monitoring methods that have been used in previous UCG field trials. We then discuss in more detail a number of promising advanced geophysical techniques. These methods – seismic, electromagnetic, and remote sensing techniques – may provide improved and cost-effective ways to image both the subsurface cavity growth and surface subsidence effects. Active and passive seismic data have the promise to monitor the burn front, cavity growth, and observe cavity collapse events. Electrical resistance tomography (ERT) produces near real time tomographic images autonomously, monitors the burn front and images the cavity using low-cost sensors, typically running within boreholes. Interferometric synthetic aperture radar (InSAR) is a remote sensing technique that has the capability to monitor surface subsidence over the wide area of a commercial-scale UCG operation at a low cost. It may be possible to infer cavity geometry from InSAR (or other surface topography) data using geomechanical modeling. The expected signals from these monitoring methods are described along with interpretive modeling for typical UCG cavities. They are illustrated using field results from UCG trials and other relevant subsurface operations.

  1. Applied coal petrology: the role of petrology in coal utilization

    Energy Technology Data Exchange (ETDEWEB)

    Isabel Suarez-Ruiz; John Crelling [Instituto Nacional del Carbon (INCAR-CSIC), Oviedo (Spain)

    2008-08-15

    This book is an integrated approach towards the applications of coal (organic) petrology and discusses the role of this science in the field of coal and coal-related topics. Contents are: Introduction 2. Basic factors controlling coal quality and technological behaviour of coal 3. Mining and benefication 4. Coal combustion 5. Coal gasification 6. Coal liquefaction 7. Coal carbonisation 8. Coal-derived carbons 9. Coal as a Petroleum source rock and reservoir rock 10. Environmental and health aspects 11. Other applications of coal petrology.

  2. Assessing coal burnout

    Energy Technology Data Exchange (ETDEWEB)

    Lowe, A. [Pacific Power, Sydney, NSW (Australia)

    1999-11-01

    Recent research has allowed a quantitative description of the basic process of burnout for pulverized coals to be made. The Cooperative Research Centre for Black Coal Utilization has built on this work to develop a coal combustion model which will allow plant engineers and coal company representatives to assess their coals for combustion performance. The paper describes the model and its validation and outlines how it is run. 2 figs.

  3. Colombian coal focus

    Energy Technology Data Exchange (ETDEWEB)

    Warden-Fernandez, J.; Rodriguez, L.E. [University of Dundee, Dundee (United Kingdom)

    2003-03-01

    The paper reviews the development of Colombia's coal industry over recent years. Colombia has recently modernised its mining code, Law 685 of 2001 concerning mineral rights and including the concept of sustainable development. The article discusses the legislation, analyses trends in Columbia's income from the coal and mineral industries (nickel, gold, emerald), and briefly discusses coal reserves, mining projects, coal exports and markets for Colombian coal. 7 refs., 7 figs., 4 tabs.

  4. Coal combustion products

    Science.gov (United States)

    Kalyoncu, R.S.; Olson, D.W.

    2001-01-01

    Coal-burning powerplants, which supply more than half of U.S. electricity, also generate coal combustion products, which can be both a resource and a disposal problem. The U.S. Geological Survey collaborates with the American Coal Ash Association in preparing its annual report on coal combustion products. This Fact Sheet answers questions about present and potential uses of coal combustion products.

  5. Study of the properties of mine waste in the midwestern coal fields. Phase I report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-07-04

    In an effort to assist the coal industry in complying with the applicable regulations, to design safe and environmentally acceptable disposal systems, and to encourage secondary use of coal mine waste, the US Department of Energy has initiated research programs to develop coal mine waste disposal and use technology. This study of the properties of mine wastes in the Midwestern coal fields has been limited to the waste materials obtained from underground coal mines and preparation plants attached to both underground and surface mines. The program has been divided into two phases. In Phase I, the 20 most important properties relevant to safe disposal, reclamation, underground disposal, and secondary uses have been identified. An inventory of the significant waste disposal sites in the Midwestern coal fields has been prepared. The site locations have been plotted on USGS maps. Estimates of coal production and coal mine waste production during the next 2 decades have been prepared and are presented in this report. Also, all available information obtained from a search of existing literature on physical and chemical properties, including analysis results of the general runoff from the refuse disposal areas, has been collected and is presented. In order to fill the gaps in information, 20 sites have been identified for drilling and sampling to determine the various physical and chemical properties. They have been selected on the basis of the distribution and quantity of waste at the existing locations (both abandoned and active), the future trends in production and likely locations of waste disposal areas, their geographical and geological distribution, and ease of accessibility for drilling and sampling.

  6. Geological controls on the sulphur content of coal seams in the Northumberland Coalfield, Northeast England

    Energy Technology Data Exchange (ETDEWEB)

    Turner, Brian R. [Department of Earth Sciences, Science Laboratories, University of Durham, South Road, Durham DH1 3LE (United Kingdom); Richardson, David [H.J. Banks and Co. Ltd, Bishop Auckland DL13 4HG (United Kingdom)

    2004-12-03

    prediction of reserve identification for surface mining operations.

  7. Coal data: A reference

    Energy Technology Data Exchange (ETDEWEB)

    1995-02-01

    This report, Coal Data: A Reference, summarizes basic information on the mining and use of coal, an important source of energy in the US. This report is written for a general audience. The goal is to cover basic material and strike a reasonable compromise between overly generalized statements and detailed analyses. The section ``Supplemental Figures and Tables`` contains statistics, graphs, maps, and other illustrations that show trends, patterns, geographic locations, and similar coal-related information. The section ``Coal Terminology and Related Information`` provides additional information about terms mentioned in the text and introduces some new terms. The last edition of Coal Data: A Reference was published in 1991. The present edition contains updated data as well as expanded reviews and additional information. Added to the text are discussions of coal quality, coal prices, unions, and strikes. The appendix has been expanded to provide statistics on a variety of additional topics, such as: trends in coal production and royalties from Federal and Indian coal leases, hours worked and earnings for coal mine employment, railroad coal shipments and revenues, waterborne coal traffic, coal export loading terminals, utility coal combustion byproducts, and trace elements in coal. The information in this report has been gleaned mainly from the sources in the bibliography. The reader interested in going beyond the scope of this report should consult these sources. The statistics are largely from reports published by the Energy Information Administration.

  8. Coal char fragmentation during pulverized coal combustion

    Energy Technology Data Exchange (ETDEWEB)

    Baxter, L.L.

    1995-07-01

    A series of investigations of coal and char fragmentation during pulverized coal combustion is reported for a suite of coals ranging in rank from lignite to low-volatile (lv) bituminous coal under combustion conditions similar to those found in commercial-scale boilers. Experimental measurements are described that utilize identical particle sizing characteristics to determine initial and final size distributions. Mechanistic interpretation of the data suggest that coal fragmentation is an insignificant event and that char fragmentation is controlled by char structure. Chars forming cenospheres fragment more extensively than solid chars. Among the chars that fragment, large particles produce more fine material than small particles. In all cases, coal and char fragmentation are seen to be sufficiently minor as to be relatively insignificant factors influencing fly ash size distribution, particle loading, and char burnout.

  9. Upgraded Coal Interest Group

    Energy Technology Data Exchange (ETDEWEB)

    Evan Hughes

    2009-01-08

    The Upgraded Coal Interest Group (UCIG) is an EPRI 'users group' that focuses on clean, low-cost options for coal-based power generation. The UCIG covers topics that involve (1) pre-combustion processes, (2) co-firing systems and fuels, and (3) reburn using coal-derived or biomass-derived fuels. The UCIG mission is to preserve and expand the economic use of coal for energy. By reducing the fuel costs and environmental impacts of coal-fired power generation, existing units become more cost effective and thus new units utilizing advanced combustion technologies are more likely to be coal-fired.

  10. International perspectives on coal preparation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The report consists of the vugraphs from the presentations which covered the following topics: Summaries of the US Department of Energy`s coal preparation research programs; Preparation trends in Russia; South African coal preparation developments; Trends in hard coal preparation in Germany; Application of coal preparation technology to oil sands extraction; Developments in coal preparation in China; and Coal preparation in Australia.

  11. Parameterization, sensitivity analysis, and inversion: an investigation using groundwater modeling of the surface-mined Tivoli-Guidonia basin (Metropolitan City of Rome, Italy)

    Science.gov (United States)

    La Vigna, Francesco; Hill, Mary C.; Rossetto, Rudy; Mazza, Roberto

    2016-09-01

    With respect to model parameterization and sensitivity analysis, this work uses a practical example to suggest that methods that start with simple models and use computationally frugal model analysis methods remain valuable in any toolbox of model development methods. In this work, groundwater model calibration starts with a simple parameterization that evolves into a moderately complex model. The model is developed for a water management study of the Tivoli-Guidonia basin (Rome, Italy) where surface mining has been conducted in conjunction with substantial dewatering. The approach to model development used in this work employs repeated analysis using sensitivity and inverse methods, including use of a new observation-stacked parameter importance graph. The methods are highly parallelizable and require few model runs, which make the repeated analyses and attendant insights possible. The success of a model development design can be measured by insights attained and demonstrated model accuracy relevant to predictions. Example insights were obtained: (1) A long-held belief that, except for a few distinct fractures, the travertine is homogeneous was found to be inadequate, and (2) The dewatering pumping rate is more critical to model accuracy than expected. The latter insight motivated additional data collection and improved pumpage estimates. Validation tests using three other recharge and pumpage conditions suggest good accuracy for the predictions considered. The model was used to evaluate management scenarios and showed that similar dewatering results could be achieved using 20 % less pumped water, but would require installing newly positioned wells and cooperation between mine owners.

  12. Coal Combustion Science

    Energy Technology Data Exchange (ETDEWEB)

    Hardesty, D.R. (ed.); Fletcher, T.H.; Hurt, R.H.; Baxter, L.L. (Sandia National Labs., Livermore, CA (United States))

    1991-08-01

    The objective of this activity is to support the Office of Fossil Energy in executing research on coal combustion science. This activity consists of basic research on coal combustion that supports both the Pittsburgh Energy Technology Center Direct Utilization Advanced Research and Technology Development Program, and the International Energy Agency Coal Combustion Science Project. Specific tasks for this activity include: (1) coal devolatilization - the objective of this risk is to characterize the physical and chemical processes that constitute the early devolatilization phase of coal combustion as a function of coal type, heating rate, particle size and temperature, and gas phase temperature and oxidizer concentration; (2) coal char combustion -the objective of this task is to characterize the physical and chemical processes involved during coal char combustion as a function of coal type, particle size and temperature, and gas phase temperature and oxygen concentration; (3) fate of mineral matter during coal combustion - the objective of this task is to establish a quantitative understanding of the mechanisms and rates of transformation, fragmentation, and deposition of mineral matter in coal combustion environments as a function of coal type, particle size and temperature, the initial forms and distribution of mineral species in the unreacted coal, and the local gas temperature and composition.

  13. Element geochemistry and cleaning potential of the No. 11 coal seam from Antaibao mining district

    Institute of Scientific and Technical Information of China (English)

    WANG; Wenfeng; QIN; Yong; SONG; Dangyu; SANG; Shuxun; JIAN

    2005-01-01

    Based on the analyses of sulfur and 41 other elements in 8 channel samples of the No. 11 coal seam from Antaibao surface mine, Shanxi, China and 4 samples from the coal preparation plant of this mine, the distribution of the elements in the seam profile, their geochemical partitioning behavior during the coal cleaning and the genetic relationships between the both are studied. The conclusions are drawn as follows. The coal-forming environment was probably invaded by sea water during the post-stage of peatification, which results in the fact that the contents of As, Fe, S, etc. associated closely with sea water tend to increase toward the top of the seam, and that the kaolinite changes into illite and montmorillonite in the coal-sublayer near the roof. These elements studied are dominantly associated with kaolinite, pyrite, illite, montmorillonite, etc., of which the As, Pb, Mn, Cs, Co, Ni, etc. are mainly associated with sulfides, the Mo, V, Nb, Hf, REEs, Ta etc. mainly with kaolintie, the Mg, Al etc. mainly with epigenetic montmorillonite, and the Rb, Cr, Ba, Cu, K, Hg, etc. mainly with epigenetic illite. The physical coal cleaning is not only effective in the removal of ash and sulfur, but also in reducing the concentration of most major and trace elements. The elements Be, U, Sb, W, Br, Se, P, etc. are largely or partly organically bound showing a relatively low removability, while the removability of the other elements studied is more than 20%, of which the Mg, Mn, Hg, Fe, As, K, Al, Cs, and Cr associated mostly with the coarser or epigenetic minerals show a higher removability than that of ash. The distribution of the elements in the seam profile controls their partitioning behavior to a great degree during the coal cleaning processes.

  14. Coal fires in China

    Institute of Scientific and Technical Information of China (English)

    CHE Yao(车遥); HUANG Wen-hui(黄文辉); ZHANG Ai-yun(张爱云)

    2004-01-01

    Coal fires have a very long history in China; the oldest coal fires have being burning for many million years. Up to now more than 56 coal fires spots were distinguished. They mainly locate in West-North of China, North of China and East-North of China. About millions of tons of coal have been burned in fires every year. Xinjiang Autonomy is the most serious region in coal fires as it has 38 coal fires spots and about 6.85 million tons of coal was burned every year. Coal fires in China ignited by wildfires, spontaneous combustion and human being during mining activities. These fires have released about 0.9 million tons of gasses (including CO, CO2, SO2, NO2 CH4, CO2, H2S etc.) into the atmosphere every year, most of which are brought to the east by wind and resulting more heavier air pollution in northern China.

  15. Continuous coal processing method

    Science.gov (United States)

    Ryason, P. R.

    1980-06-01

    A coal pump is provided in which solid coal is heated in the barrel of an extruder under pressure to a temperature at which the coal assumes plastic properties. The coal is continuously extruded, without static zones, using, for example, screw extrusion preferably without venting through a reduced diameter die to form a dispersed spray. As a result, the dispersed coal may be continuously injected into vessels or combustors at any pressure up to the maximum pressure developed in the extrusion device. The coal may be premixed with other materials such as desulfurization aids or reducible metal ores so that reactions occur, during or after conversion to its plastic state. Alternatively, the coal may be processed and caused to react after extrusion, through the die, with, for example, liquid oxidizers, whereby a coal reactor is provided.

  16. Nitrogen in Chinese coals

    Science.gov (United States)

    Wu, D.; Lei, J.; Zheng, B.; Tang, X.; Wang, M.; Hu, Jiawen; Li, S.; Wang, B.; Finkelman, R.B.

    2011-01-01

    Three hundred and six coal samples were taken from main coal mines of twenty-six provinces, autonomous regions, and municipalities in China, according to the resource distribution and coal-forming periods as well as the coal ranks and coal yields. Nitrogen was determined by using the Kjeldahl method at U. S. Geological Survey (USGS), which exhibit a normal frequency distribution. The nitrogen contents of over 90% Chinese coal vary from 0.52% to 1.41% and the average nitrogen content is recommended to be 0.98%. Nitrogen in coal exists primarily in organic form. There is a slight positive relationship between nitrogen content and coal ranking. ?? 2011 Science Press, Institute of Geochemistry, CAS and Springer Berlin Heidelberg.

  17. Coal worker's pneumoconiosis

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/000130.htm Coal worker's pneumoconiosis To use the sharing features on this page, please enable JavaScript. Coal worker's pneumoconiosis is a lung disease that results ...

  18. Fluidized coal combustion

    Science.gov (United States)

    Moynihan, P. I.; Young, D. L.

    1979-01-01

    Fluidized-bed coal combustion process, in which pulverized coal and limestone are burned in presence of forced air, may lead to efficient, reliable boilers with low sulfur dioxide and nitrogen dioxide emissions.

  19. TENORM: Coal Combustion Residuals

    Science.gov (United States)

    Burning coal in boilers to create steam for power generation and industrial applications produces a number of combustion residuals. Naturally radioactive materials that were in the coal mostly end up in fly ash, bottom ash and boiler slag.

  20. Chemicals from coal

    Energy Technology Data Exchange (ETDEWEB)

    Harold A. Wittcoff; Bryan G. Reuben; Jeffrey S. Plotkin

    2004-12-01

    This chapter contains sections titled: Chemicals from Coke Oven Distillate; The Fischer-Tropsch Reaction; Coal Hydrogenation; Substitute Natural Gas (SNG); Synthesis Gas Technology; Calcium Carbide; Coal and the Environment; and Notes and References

  1. Coal Extraction - Environmental Prediction

    Science.gov (United States)

    Cecil, C. Blaine; Tewalt, Susan J.

    2002-01-01

    Coal from the Appalachian region has supplied energy to the Nation for more than 200 years. Appalachian coal fueled America through a civil war and helped win two world wars. Appalachian coal has also provided fuel for keeping America warm in the winter and cool in the summer and has served as the basis for the steel, automobile, organic chemicals, chlorine, and aluminum industries. These benefits have not come without environmental costs, however. Coal extraction and utilization have had significant environmental impacts.

  2. Considerations on coal gasification

    Science.gov (United States)

    Franzen, J. E.

    1978-01-01

    Commercial processes for the gasification of coal with oxygen are discussed. The Koppers-Totzek process for the gasification of coal dust entrained in a stream of gasifying agents is described in particular detail. The outlook for future applications of coal gasification is presented.

  3. Prediction of coal hydrophobicity

    Energy Technology Data Exchange (ETDEWEB)

    Labuschagne, B.C.J. [Council for Scientific and Industrial Research, Pretoria (South Africa). Div. of Energy Technology; Wheelock, T.D.; Guo, R.K.; David, H.T. [Iowa State Univ. of Science and Technology, Ames, IA (United States); Markuszewski, R. [Ames Lab., IA (United States)

    1988-12-31

    Many coals exhibit a certain degree of native hydrophobicity. The more hydrophobic coals (the higher-rank coals) are easily beneficiated by froth flotation or oil agglomeration, while the more hydrophilic coals (the lower-rank coals) are floated or agglomerated with difficulty. Coals of different ranks and often even of the same rank sometimes differ greatly in hydrophobicity as measured by contact angle or natural floatability. Although the degree of hydrophobicity of a coal is related to its rank and has been correlated with other surface properties of the coal , the known information is still not sufficient to allow a good estimation to be made of the hydrophobicity of a given coal and does not explain the variation of coal hydrophobicity as a function of rank. A statistical analysis of previously published data, as well as newly acquired data, shows that coal hydrophobicity correlates better with moisture content than with carbon content, and better with the moisture/carbon molar ratio than with the hydrogen/carbon or oxygen/carbon atomic ratios. These findings indicate that there is a strong association between hydrophobicity and coal moisture content.

  4. Coal production 1989

    Energy Technology Data Exchange (ETDEWEB)

    1990-11-29

    Coal Production 1989 provides comprehensive information about US coal production, the number of mines, prices, productivity, employment, reserves, and stocks to a wide audience including Congress, federal and state agencies, the coal industry, and the general public. 7 figs., 43 tabs.

  5. Integrated mined-area reclamation and land-use planning. Volume 3C. A case study of surface mining and reclamation planning: Georgia Kaolin Company Clay Mines, Washington County, Georgia

    Energy Technology Data Exchange (ETDEWEB)

    Guernsey, J L; Brown, L A; Perry, A O

    1978-02-01

    This case study examines the reclamation practices of the Georgia Kaolin's American Industrial Clay Company Division, a kaolin producer centered in Twiggs, Washington, and Wilkinson Counties, Georgia. The State of Georgia accounts for more than one-fourth of the world's kaolin production and about three-fourths of U.S. kaolin output. The mining of kaolin in Georgia illustrates the effects of mining and reclaiming lands disturbed by area surface mining. The disturbed areas are reclaimed under the rules and regulations of the Georgia Surface Mining Act of 1968. The natural conditions influencing the reclamation methodologies and techniques are markedly unique from those of other mining operations. The environmental disturbances and procedures used in reclaiming the kaolin mined lands are reviewed and implications for planners are noted.

  6. Regional scale selenium loading associated with surface coal mining, Elk Valley, British Columbia, Canada.

    Science.gov (United States)

    Wellen, Christopher C; Shatilla, Nadine J; Carey, Sean K

    2015-11-01

    Selenium (Se) concentrations in surface water downstream of surface mining operations have been reported at levels in excess of water quality guidelines for the protection of wildlife. Previous research in surface mining environments has focused on downstream water quality impacts, yet little is known about the fundamental controls on Se loading. This study investigated the relationship between mining practices, stream flows and Se concentrations using a SPAtially Referenced Regression On Watershed attributes (SPARROW) model. This work is part of a R&D program examining the influence of surface coal mining on hydrological and water quality responses in the Elk Valley, British Columbia, Canada, aimed at informing effective management responses. Results indicate that waste rock volume, a product of mining activity, accounted for roughly 80% of the Se load from the Elk Valley, while background sources accounted for roughly 13%. Wet years were characterized by more than twice the Se load of dry years. A number of variables regarding placement of waste rock within the catchments, length of buried streams, and the construction of rock drains did not significantly influence the Se load. The age of the waste rock, the proportion of waste rock surface reclaimed, and the ratio of waste rock pile side area to top area all varied inversely with the Se load from watersheds containing waste rock. These results suggest operational practices that are likely to reduce the release of Se to surface waters.

  7. Optimum crushing level of blasted rock at the Prokop'evsk surface coal mine

    Energy Technology Data Exchange (ETDEWEB)

    Gemba, V.I.; Starkov, V.L.; Ustyuzhanin, V.S.

    1987-06-01

    Explains that improving the quality of rock crushing using blasting energy increases the efficiency of excavators and other mining equipment, reduces the energy required for scooping and loading tasks and hence reduces the cost of excavating and transporting rock. Investigations performed in surface mines in the Southern Urals and the Kuzbass coal sections showed that changing the mean linear dimensions of the lumps of blasted rock from 0.2 to 0.8 m increased the power consumption of a EhKG-4,6 excavator from 0.12 to 0.3 kWh/m/sup 3/ and that of loading from 0.1 to 1.56 kWh/m/sup 3/. Uses actual values for the efficiency and costs of blasting, excavation and transporting operations (presented in tabular form) as the basis for a comparative evaluation with the aim of determining how to achieve maximum cost-efficiency and, taking all factors into account, calculates that for the Prokop'evsk surface mine the optimum lump size is 0.4 m.

  8. The economics of coal

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    Global aspects of the production, consumption and trade in coal are described. World reserves and resources, production (both by region and country), international trade (exporters and importers), coal consumption (by region and sector), and the demand for primary energy (1960-1979). Each of the producing and consuming countries are discussed individually. The electricity sector and its future demand for coal, and the future demand for coking coal are covered. Prices for metallurgical and steam coal are also given. Statistics are presented in tables.

  9. Radionuclides in US coals

    Energy Technology Data Exchange (ETDEWEB)

    Bisselle, C. A.; Brown, R. D.

    1984-03-01

    The current state of knowledge with respect to radionuclide concentrations in US coals is discussed. Emphasis is placed on the levels of uranium in coal (and lignite) which are considered to represent a concern resulting from coal combustion; areas of the US where such levels have been found; and possible origins of high radionuclide levels in coal. The report reviews relevant studies and presents new data derived from a computerized search of radionuclide content in about 4000 coal samples collected throughout the coterminous US. 103 references, 5 figures, 5 tables.

  10. Hydrologic data from wells at or in the vicinity of the San Juan coal mine, San Juan County, New Mexico

    Science.gov (United States)

    Stewart, Anne M.; Thomas, Nicole

    2015-01-01

    In 2010, in cooperation with the Mining and Minerals Division (MMD) of the State of New Mexico Energy, Minerals and Natural Resources Department, the U.S. Geological Survey (USGS) initiated a 4-year assessment of hydrologic conditions at the San Juan coal mine (SJCM), located about 14 miles west-northwest of the city of Farmington, San Juan County, New Mexico. The mine produces coal for power generation at the adjacent San Juan Generating Station (SJGS) and stores coal-combustion byproducts from the SJGS in mined-out surface-mining pits. The purpose of the hydrologic assessment is to identify groundwater flow paths away from SJCM coal-combustion-byproduct storage sites that might allow metals that may be leached from coal-combustion byproducts to eventually reach wells or streams after regional dewatering ceases and groundwater recovers to predevelopment levels. The hydrologic assessment, undertaken between 2010 and 2013, included compilation of existing data. The purpose of this report is to present data that were acquired and compiled by the USGS for the SJCM hydrologic assessment.

  11. Coal; Le charbon

    Energy Technology Data Exchange (ETDEWEB)

    Teissie, J.; Bourgogne, D. de; Bautin, F. [TotalFinaElf, La Defense, 92 - Courbevoie (France)

    2001-12-15

    Coal world production represents 3.5 billions of tons, plus 900 millions of tons of lignite. 50% of coal is used for power generation, 16% by steel making industry, 5% by cement plants, and 29% for space heating and by other industries like carbo-chemistry. Coal reserves are enormous, about 1000 billions of tons (i.e. 250 years of consumption with the present day rate) but their exploitation will be in competition with less costly and less polluting energy sources. This documents treats of all aspects of coal: origin, composition, calorific value, classification, resources, reserves, production, international trade, sectoral consumption, cost, retail price, safety aspects of coal mining, environmental impacts (solid and gaseous effluents), different technologies of coal-fired power plants and their relative efficiency, alternative solutions for the recovery of coal energy (fuel cells, liquefaction). (J.S.)

  12. The CIS coal summit

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    The presentations (overhead/viewgraphs) include: the impacts of EU environmental legislation on Russian coal market (A. Sankovski); how Caterpillar and Cat dealers create value in the global mining industry (D. Mohr); new coal preparation technology and application in the Russian coal market (D. Morris); UK demand outlook and import growth (G. Parker); new technologies in blasting operations and services (J. Petzold and others); a global bank's view of the coal sector (M. Seleznev); ELGA coal deposit, Republic of Sakha (Yakutia), Russia (M. Tsikanov); Russia's economic outlook (P. Forrest); Renaissance Capital (investment bank) (R. Edwards); Russian coal for Korean gencos (S. Kim); and coking coal in Ukraine (V. Khilko).

  13. CARBON SEQUESTRATION SURFACE MINE LANDS

    Energy Technology Data Exchange (ETDEWEB)

    Donald H. Graves

    2003-05-06

    An authorized budget was unavailable during this first 3-month working period of this project. Our ability to use the $100K that DOE had dedicated to the project was frustrated by the internal problem of getting an account number issued to bill our expenses to. This has delayed the initiation of a portion of the tasks to be performed. However, enough has been accomplished to allow the project to meet the first years planting goals. This will also allow the initiation of several start-up activities that could not have been possible without established tree plantations.

  14. CARBON SEQUESTRATION SURFACE MINE LANDS

    Energy Technology Data Exchange (ETDEWEB)

    Donald H. Graves; Christopher Barton; Richard Sweigard; Richard Warner

    2003-07-24

    Over 160 acres of tree seedlings were planted during the last quarter. This quarter marked the beginning of the installation of new instrumentation and the inspection and calibration of previously installed recording devices. Sampling systems were initiated to quantify initial seedling success as well as height measurements. Nursery seedlings have been inoculated to produce mycorrhizal treated stock for 2004 spring plantings to determine the effects on carbon sequestration. All planting areas in western Kentucky have been sampled with the recording cone penetrometer and the nuclear density gauge to measure soil density.

  15. Correlation between coal characteristics and methane adsorption on China's coals

    Institute of Scientific and Technical Information of China (English)

    YU Hong-guan; YUAN Jian; SONG Ji-yong; LENG Shu-wei

    2007-01-01

    It is highly important to investigate relationship between coal characteristics and methane adsorption on coal in the fields of coalbed methane recovery. Based on data examination of coal quality indexes collected from the literatures, regression equations for Langmuir adsorption constants, VL or VL/PL, and coal quality indexes for selected coal samples were developed with multiple linear regression of SPSS software according to the degree of coal metamorphosis. The regression equations built were tested with data collected from some literatures, and the influences of coal quality indexes on CH4 adsorption on coals were studied with investigation of regression equations, and the reasons of low accuracy to Langmuir constants calculated with regression equation for a few coal samples were investigated. The results show that the regression equations can be employed to predict Langmuir constants for methane adsorption isotherms on coals obtained using volumetric gas adsorption experiments, which are conducted at 30 ℃ on a wet or dried coal samples with less than 30% ash content in coal. The influence of same coal quality index with various coal rank or influence of various coal quality indexes for same coal rank on CH4 adsorption is not consistent. The regression equations have different accuracy to different coal rank, in which the VL equations supply better prediction accuracy for anthracite and higher prediction error for lower metamorphosis coal, and the PL prediction error with VL and VL/PL equations is lower to bituminous coal and higher to anthracite.

  16. Coal, culture and community

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-11-01

    16 papers are presented with the following titles: the miners; municipalisation and the millenium - Bolton-upon-Dearne Urban District Council 1899-1914; the traditional working class community revisited; the cultural capital of coal mining communities; activities, strike-breakers and coal communities; the limits of protest - media coverage of the Orgreave picket during the miners` strike; in defence of home and hearth? Families, friendships and feminism in mining communities; young people`s attitudes to the police in mining communities; the determinants of productivity growth in the British coal mining industry, 1976-1989; strategic responses to flexibility - a case study in coal; no coal turned in Yorkshire?; the North-South divide in the Central Coalfields; the psychological effects of redundancy and worklessness - a case study from the coalfields; the Dearne Valley initiative; the future under labour: and coal, culture and the community.

  17. Beneficiated coals' char morphology

    Directory of Open Access Journals (Sweden)

    Diana Vargas

    2012-09-01

    Full Text Available This work evaluated the char morphology of beneficiated and original coal (without beneficiation from four Colombian coalmines: Cerrejón (La Guajira, La Jagua (Cesar, Guachinte (Valle del Cauca and Nechí (Antioquia. Column flotation was used to obtain beneficiated coal, whereas a drop tube reactor at 1,000°C, 104 °C/s heating rate and 100 ms residence time was used to obtain char. The chars were analysed by image analysis which determined their shape, size, porosity and wall thickness. It was found that char morphology depended on coal rank and maceral composition. Morphological characteristics like high porosity, thinner walls and network-like morphology which are beneficial in improving combustion were present in vitrinite- and liptinite-rich lowest-ranking coals. Beneficiated coals showed that their chars had better performance regarding their morphological characteristics than their original coal chars.

  18. Coal tar in dermatology

    Energy Technology Data Exchange (ETDEWEB)

    Roelofzen, J.H.J.; Aben, K.K.H.; Van Der Valk, P.G.M.; Van Houtum, J.L.M.; Van De Kerkhof, P.C.M.; Kiemeney, L.A.L.M. [Radboud University Nijmegen Medical Center, Nijmegen (Netherlands). Dept. of Dermatology

    2007-07-01

    Coal tar is one of the oldest treatments for psoriasis and eczema. It has anti-inflammatory, antibacterial, antipruritic and antimitotic effects. The short-term side effects are folliculitis, irritation and contact allergy. Coal tar contains carcinogens. The carcinogenicity of coal tar has been shown in animal studies and studies in occupational settings. There is no clear evidence of an increased risk of skin tumors or internal tumors. Until now, most studies have been fairly small and they did not investigate the risk of coal tar alone, but the risk of coal tar combined with other therapies. New, well-designed, epidemiological studies are necessary to assess the risk of skin tumors and other malignancies after dermatological use of coal tar.

  19. Coal: ditching the dirt

    Energy Technology Data Exchange (ETDEWEB)

    Russell, E.

    2006-01-01

    At the time when the British government is considering building new nuclear power plants, this article gives an overview of how the coal industry has been developing technologies to reduce greenhouse gas emissions and increase combustion efficiency which make coal a more attractive power source that should not be overlooked. Technologies mentioned include integrated gasification combined cycle, fluidized bed combustion, low NOx burners, and combustion control. Research is under way on capturing greenhouse gas emissions from fossil fuels. Use of fly ash in cement manufacture help reduce CO{sub 2} emissions. Clean coal technologies in the UK are supported by the IEA Clean Coal Centre, the World Coal Institute and the Coal Research Forum. 3 photos. 3 figs.

  20. Arthropod cuticles in coal

    Energy Technology Data Exchange (ETDEWEB)

    Bartram, K.M.; Jeram, A.J.; Selden, P.A.

    1987-05-01

    An abundance of scorpion cuticles from Westphalian (Upper Carboniferous) coals of Yorkshire is described, and other records of arthropod cuticles in coals are reviewed. The absence of cuticles assignable to arthropod groups other than scorpions is thought to be due to preferential preservation of the unique exocuticle of scorpions; it alone is preserved and appears to retain an organic nature. The cuticle is recovered from all the lithotypes of humic bituminous coals although it is most common in coals rich in inertinite macerals. From the present study it is uncertain whether the scorpions were aquatic or terrestrial. The recognition of arthropod cuticle as a coal maceral could aid environmental interpretations. The abundance of arthropod cuticle in the coals studied indicates its potential use in correlation and in determining the thermal maturity of sediments. 37 refs., 1 fig.

  1. Cooperative research program in coal liquefaction

    Energy Technology Data Exchange (ETDEWEB)

    Huffman, G.P. (ed.)

    1991-01-01

    This Quarterly Report on coal liquefaction research includes discussion in the areas of (1) Iron Based Catalysts for Coal Liquefaction; (2) Exploratory Research on Coal Conversion; (3) Novel Coal Liquefaction Concepts; (4) Novel Catalysts for Coal Liquefaction. (VC)

  2. Cooperative research program in coal liquefaction

    Energy Technology Data Exchange (ETDEWEB)

    Huffman, G.P. (ed.)

    1992-01-01

    Research continues on coal liquefaction in the following areas: (1) Iron Based Catalysts for Coal Liquefaction; (2) Exploratory Research on Coal Conversion; (3) Novel Coal Liquefaction Concepts; (4) Novel Catalysts for Coal Liquefaction. (VC)

  3. Cooperative research program in coal liquefaction

    Energy Technology Data Exchange (ETDEWEB)

    Huffman, G.P. (ed.)

    1991-01-01

    This Quarterly Report on coal liquefaction research includes discussion in the areas of (1) Iron Based Catalysts for Coal Liquefaction; (2) Exploratory Research on Coal Conversion; (3) Novel Coal Liquefaction Concepts; (4) Novel Catalysts for Coal Liquefaction. (VC)

  4. CLEANER ENERGY FROM COAL

    Directory of Open Access Journals (Sweden)

    Adina-MilenaTĂTAR

    2016-12-01

    Full Text Available With the ever-increasing demand for coal, particularly in the developing world, the use of low emission coal technologies becomes increasingly important if international targets on climate change are to be achieved. The two principal avenues for reducing carbon emissions from coal-fired power generation are through use of high efficiency, low emission power plantsand carbon capture, use and storage.

  5. Supercritical solvent coal extraction

    Science.gov (United States)

    Compton, L. E. (Inventor)

    1984-01-01

    Yields of soluble organic extract are increased up to about 50% by the supercritical extraction of particulate coal at a temperature below the polymerization temperature for coal extract fragments (450 C.) and a pressure from 500 psig to 5,000 psig by the conjoint use of a solvent mixture containing a low volatility, high critical temperature coal dissolution catalyst such as phenanthrene and a high volatility, low critical temperature solvent such as toluene.

  6. Pyrolysis of Coal

    Directory of Open Access Journals (Sweden)

    Rađenović, A.

    2006-07-01

    Full Text Available The paper presents a review of relevant literature on coal pyrolysis.Pyrolysis, as a process technology, has received considerable attention from many researchers because it is an important intermediate stage in coal conversion.Reactions parameters as the temperature, pressure, coal particle size, heating rate, soak time, type of reactor, etc. determine the total carbon conversion and the transport of volatiles and therebythe product distribution. Part of the possible environmental pollutants could be removed by optimising the pyrolysis conditions. Therefore, this process will be subsequently interesting for coal utilization in the future

  7. Petrographers fingerprint coals

    Energy Technology Data Exchange (ETDEWEB)

    Pearson, D.E. [Pearson and Associates Ltd. (USA)

    2001-05-01

    A new system of coal fingerprinting called Digipet generates reflectance profiles by using an automated digital imaging system in which tens of millions of individual reflectance measurements are obtained. Images are conditioned to generate a detailed smooth histogram which convey information on the coal sample's provenance and history. Expert interpretation can reveal further information. The article gives details of the instrument and shows sample reflectance profiles. It discusses some applications in sampling coal charged to coke ovens of the Indiana Harbor Coke Co, and at a Midwest generating plant where it detected the presence of rogue high volatile coal. 3 figs.

  8. Looking into the coal option. [Highlights from IIASA/USSR Academy of Science conference, late 1977

    Energy Technology Data Exchange (ETDEWEB)

    Grenon, M.

    A report on the 1977 Energy Resources Conference held in Moscow focuses on the technical and economic aspects of coal as they relate to global resource policy problems. Estimates of untouched reserved continue to rise, including those in developing countries, although the Soviet Union, China and the U.S. continue to dominate. Underground mining will be applied, with new approaches in hydraulic bore hole mining, robots, microbiological attack, in-situ liquefaction, underground gasification, and others being explored and developed. Surface mining is expected to account for most of the increased production in the near term with equipment that tends toward gigantism. The major issue with coal, however, is its dependence on inexpensive transportation and the possibility of using pipelines. The conference reviewed the role of coal in meeting increasing energy demand and concluded that power generation and metallurgical applications will absorb the increase in production. Combustion products and their effects on global climatic and atmospheric conditions were discussed with the consensus that more work is needed to quantify carbon dioxide risk.

  9. Clean coal technologies market potential

    Energy Technology Data Exchange (ETDEWEB)

    Drazga, B. (ed.)

    2007-01-30

    Looking at the growing popularity of these technologies and of this industry, the report presents an in-depth analysis of all the various technologies involved in cleaning coal and protecting the environment. It analyzes upcoming and present day technologies such as gasification, combustion, and others. It looks at the various technological aspects, economic aspects, and the various programs involved in promoting these emerging green technologies. Contents: Industry background; What is coal?; Historical background of coal; Composition of coal; Types of coal; Environmental effects of coal; Managing wastes from coal; Introduction to clean coal; What is clean coal?; Byproducts of clean coal; Uses of clean coal; Support and opposition; Price of clean coal; Examining clean coal technologies; Coal washing; Advanced pollution control systems; Advanced power generating systems; Pulverized coal combustion (PCC); Carbon capture and storage; Capture and separation of carbon dioxide; Storage and sequestration of carbon dioxide; Economics and research and development; Industry initiatives; Clean Coal Power Initiative; Clean Coal Technology Program; Coal21; Outlook; Case Studies.

  10. State coal profiles, January 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-02

    The purpose of State Coal Profiles is to provide basic information about the deposits, production, and use of coal in each of the 27 States with coal production in 1992. Although considerable information on coal has been published on a national level, there is a lack of a uniform overview for the individual States. This report is intended to help fill that gap and also to serve as a framework for more detailed studies. While focusing on coal output, State Coal Profiles shows that the coal-producing States are major users of coal, together accounting for about three-fourths of total US coal consumption in 1992. Each coal-producing State is profiled with a description of its coal deposits and a discussion of the development of its coal industry. Estimates of coal reserves in 1992 are categorized by mining method and sulfur content. Trends, patterns, and other information concerning production, number of mines, miners, productivity, mine price of coal, disposition, and consumption of coal are detailed in statistical tables for selected years from 1980 through 1992. In addition, coal`s contribution to the State`s estimated total energy consumption is given for 1991, the latest year for which data are available. A US summary of all data is provided for comparing individual States with the Nation as a whole. Sources of information are given at the end of the tables.

  11. Quality of surface water in the coal-mining region, southwestern Indiana, March and May 1979

    Science.gov (United States)

    Renn, Danny E.; Ragone, Stephen E.; Wilber, William G.

    1980-01-01

    On August 3, 1977, the Surface Mine Control and Reclamation Act, Public Law 95-87 (the Act) was enacted by the 95th Congress. Under Section 507(b)(11) of the Act, an appropriate Federal or State agency must provide applicants for coal-mining permits hydrologic and water-quality information for the general use of proposed mining. To help meet the goals of the Act, the U.S. Geological Survey is designing a data-collection network in the coal-mining region of southwestern Indiana. The purpose of the network is to provide hydrologic and water-quality data on the ' general area ' for coal-mining permits. Because of the large size of the study area and the lack of hydrologic and water-quality data, a preliminary assessment is being done to determine the factors that affect water quality in the coal-mining region. This information will be used in designing a data network that will (1) provide the hydrologic and water-quality data needed by applicants for coal-mining permits and (2) determine the major factors that affect water quality. Reconnaissance data were collected at 293 sites in March, and hydrologic and water-quality data were collected at 84 synoptic sampling sites in May. (Synoptic sampling is the virtually simultaneous collection of data at specific sites.) In the reconnaissance, pH, specific conductance, dissolved-oxygen concentration, temperature, and Eh of streams were measured on site to provide general water-quality data. In the synoptic sampling, the preceding characteristics, as well as concentrations of various dissolved and suspended constituents of stream water and concentrations of heavy metals on streambed materials, were determined. 

  12. COAL USE REPORT

    Science.gov (United States)

    The world's coal reserves have been estimated to be about one exagram accessible with current extraction technology. The energy content has been valued at 290 zettajourles. Using a value of 15 terawatt as the current global energy consumption, the coal supply could global needs f...

  13. Coal Industry Burns Hot

    Institute of Scientific and Technical Information of China (English)

    JadaFu

    2003-01-01

    After a rapid boom last year, China's coal industry has continued to grow in 2003. The country has produced 177.27 million tons of coal in the first two months of the year, a year-on-year rise of 17.7 percent.

  14. Improving coal handling effectiveness

    Energy Technology Data Exchange (ETDEWEB)

    Walker, S.

    2003-10-01

    Appropriate coal handling systems are essential for successful coal utilisation. The paper looks at some of the options available, including crushers and hammer mills, wear-resistant liners for chutes and wagons, and dewatering systems. These are individual components within larger systems such as stockyard stacking and reclaiming installations. 5 photos.

  15. Development of coal resources

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    It is an important issue to expand stable coal supply areas for Japan, especially to assure stable supply of overseas coals. The investigations on geological structures in foreign countries perform surveys on geological structures in overseas coal producing countries and basic feasibility studies. The investigations select areas with greater business risks in coal producing countries and among private business entities. The geological structure investigations were carried out on China, Indonesia and Malaysia and the basic feasibility studies on Indonesia during fiscal 1994. The basic coal resource development investigations refer to the results of previous physical explorations and drilling tests to develop practical exploration technologies for coal resources in foreign countries. The development feasibility studies on overseas coals conduct technological consultation, surface surveys, physical explorations, and trial drilling operations, and provide fund assistance to activities related thereto. Fiscal 1994 has provided fund assistance to two projects in Indonesia and America. Fund loans are provided on investigations for development and import of overseas coals and other related activities. Liability guarantee for development fund is also described.

  16. Apparatus and method for feeding coal into a coal gasifier

    Science.gov (United States)

    Bissett, Larry A.; Friggens, Gary R.; McGee, James P.

    1979-01-01

    This invention is directed to a system for feeding coal into a gasifier operating at high pressures. A coal-water slurry is pumped to the desired pressure and then the coal is "dried" prior to feeding the coal into the gasifier by contacting the slurry with superheated steam in an entrained bed dryer for vaporizing the water in the slurry.

  17. Underground Coal Thermal Treatment

    Energy Technology Data Exchange (ETDEWEB)

    Smith, P. [Univ. of Utah, Salt Lake City, UT (United States); Deo, M. [Univ. of Utah, Salt Lake City, UT (United States); Eddings, E. [Univ. of Utah, Salt Lake City, UT (United States); Sarofim, A. [Univ. of Utah, Salt Lake City, UT (United States); Gueishen, K. [Univ. of Utah, Salt Lake City, UT (United States); Hradisky, M. [Univ. of Utah, Salt Lake City, UT (United States); Kelly, K. [Univ. of Utah, Salt Lake City, UT (United States); Mandalaparty, P. [Univ. of Utah, Salt Lake City, UT (United States); Zhang, H. [Univ. of Utah, Salt Lake City, UT (United States)

    2012-01-11

    The long-term objective of this work is to develop a transformational energy production technology by insitu thermal treatment of a coal seam for the production of substitute natural gas (SNG) while leaving much of the coal's carbon in the ground. This process converts coal to a high-efficiency, low-GHG emitting gas fuel. It holds the potential of providing environmentally acceptable access to previously unusable coal resources. This topical report discusses the development of experimental capabilities, the collection of available data, and the development of simulation tools to obtain process thermo-chemical and geo-thermal parameters in preparation for the eventual demonstration in a coal seam. It also includes experimental and modeling studies of CO2 sequestration.

  18. (Coal utilization in India)

    Energy Technology Data Exchange (ETDEWEB)

    Krishnan, R.P.

    1991-01-15

    Under the Phase II, Alternative Energy Resources Development (AERD) project of the United States Agency for International Development (USAID) and the Government of India (GOI), five collaborative coal projects have been initiated in the areas of: (1) NO{sub x}/SO{sub x} control from coal-fired power plants, (2) slagging combustor development for high-ash Indian coals, (3) characterization of Indian coals for combustion and gasification, (4) diagnostic studies for prediction of power plant life expectancy, and (5) environmental and natural resource analysis of coal cycle. The Pittsburgh Energy Technology Center (PETC) has the implementation responsibility for these projects. The Indian collaborative institutions identified for these projects are the Bharat Heavy Electricals Ltd. (BHEL), Trichy, (Projects 1--4), and the Tata Energy Research Institute (TERI) for Project 5. The Oak Ridge National Laboratory (ORNL) is providing cross-cut technical coordination and support for these five projects.

  19. Enzymatic desulfurization of coal

    Energy Technology Data Exchange (ETDEWEB)

    Boyer, Y.N.; Crooker, S.C.; Kitchell, J.P.; Nochur, S.V.

    1991-05-16

    The overall objective of this program was to investigate the feasibility of an enzymatic desulfurization process specifically intended for organic sulfur removal from coal. Toward that end, a series of specific objectives were defined: (1) establish the feasibility of (bio)oxidative pretreatment followed by biochemical sulfate cleavage for representative sulfur-containing model compounds and coals using commercially-available enzymes; (2) investigate the potential for the isolation and selective use of enzyme preparations from coal-utilizing microbial systems for desulfurization of sulfur-containing model compounds and coals; and (3) develop a conceptual design and economic analysis of a process for enzymatic removal of organic sulfur from coal. Within the scope of this program, it was proposed to carry out a portion of each of these efforts concurrently. (VC)

  20. Pyrolysis of Indonesian coal

    Energy Technology Data Exchange (ETDEWEB)

    Rachimoellah; Endah [Institut Teknologi Sepuluh Nopemba, Surabaya (Indonesia). Department of Chemical Engineering; Karaman, N.; Kusuma, S.A. [UPN Surabaya, (Indonesia). Department of Chemical Engineering

    1997-04-01

    It has been estimated that there is 36 billion tons of coal resource potential in Indonesia. Over 21.4 billion tons is classified as low rank (lignitic) coal. The coal deposits are located mainly in Sumatra and Kalimantan. As an energy source, low rank coals are not widely used, because of their high moisture content, low calorific value and variable ash content. One of the key questions for utilizing low rank coal is whether lignite can be upgraded into another form which is more economically viable. In this study tests were carried out in a pilot plant fixed bed pyrolysis reactor unit provided with hopper, electric heater, coolers and product receivers. The yield of char, tar and gases was found to depend on temperature which also affected the composition of gas produced. Results also indicated the temperature and particle size giving maximum tar yield, gas concentration, and the atmosphere of inert nitrogen. 1 tab., 2 figs., 10 refs.

  1. Industrial coal utilization

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-01-01

    The effects of the National Energy Act on the use of coal in US industrial and utility power plants are considered. Innovative methods of using coal in an environmentally acceptable way are discussed: furnace types, fluidized-bed combustion, coal-oil-mixtures, coal firing in kilns and combustion of synthetic gas and liquid fuels. Fuel use in various industries is discussed with trends brought about by uncertain availability and price of natural gas and fuel oils: steel, chemical, cement, pulp and paper, glass and bricks. The symposium on Industrial Coal Utilization was sponsored by the US DOE, Pittsburgh Energy Technology Center, April 3 to 4, 1979. Twenty-one papers have been entered individually into the EDB. (LTN)

  2. Industrial coal utilization

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-01-01

    The effects of the National Energy Act on the use of coal in US industrial and utility power plants are considered. Innovative methods of using coal in an environmentally acceptable way are discussed: furnace types, fluidized-bed combustion, coal-oil-mixtures, coal firing in kilns and combustion of synthetic gas and liquid fuels. Fuel use in various industries is discussed with trends brought about by uncertain availability and price of natural gas and fuel oils: steel, chemical, cement, pulp and paper, glass and bricks. The symposium on Industrial Coal Utilization was sponsored by the US DOE, Pittsburgh Energy Technology Center, April 3 to 4, 1979. Twenty-one papers have been entered individually into the EDB. (LTN)

  3. Capital investment at North Bohemian Brown Coal Mines

    Energy Technology Data Exchange (ETDEWEB)

    Vavrecka, S.

    1987-03-01

    Various categories of investment are discussed to be undertaken by North Bohemian Brown Coal Mines: State Plan projects, such as new extraction capacity at Most and Vrsany mines; other construction work, such as schools and recreation facilities, housing construction; underground mine workings; equipment and machinery not included in other categories; restoration work, such as the Ervenicky road/rail/water corridor; work to remove obstacles hindering future mining operations. Investments are briefly summarizes since the beginning of the 5th Five Year Plan as being concerned mainly with the shift in emphasis from underground mining to surface mining at 8 large-scale mines (Merkur, Brezno, Vrsany, Sverma, VCSA, Most, VMG, Chabrovice). An analysis of investment procedures conducted in 1980 is briefly discussed, the results of which had 4 main themes: investment control systems should be strengthened, communications between general directorate and individual departments should be improved, links between specialist institutes should be improved and these recommendations should be built into the organizational structure.

  4. Evaluation of rope shovel operators in surface coal mining using a Multi-Attribute Decision-Making model

    Institute of Scientific and Technical Information of China (English)

    Vukotic Ivana; Kecojevic Vladislav

    2014-01-01

    Rope shovels are used to dig and load materials in surface mines. One of the main factors that influence the production rate and energy consumption of rope shovels is the performance of the operator. This paper presents a method for evaluating rope shovel operators using the Multi-Attribute Decision-Making (MADM) model. Data used in this research were collected from an operating surface coal mine in the southern United States. The MADM model consists of attributes, their weights of importance, and alter-natives. Shovel operators are considered the alternatives. The energy consumption model was developed with multiple regression analysis, and its variables were included in the MADM model as attributes. Preferences with respect to min/max of the defined attributes were obtained with multi-objective opti-mization. Multi-objective optimization was conducted with the overall goal of minimizing energy con-sumption and maximizing production rate. Weights of importance of the attributes were determined by the Analytical Hierarchy Process (AHP). The overall evaluation of operators was performed by one of the MADM models, i.e., PROMETHEE II. The research results presented here may be used by mining professionals to help evaluate the performance of rope shovel operators in surface mining.

  5. Application of ERTS-A imagery to fracture related mine safety hazards in the coal mining industry

    Science.gov (United States)

    Wier, C. E.; Wobber, F. J. (Principal Investigator)

    1973-01-01

    The author has identified the following significant results. The most important result to date is the demonstration of the special value of repetitive ERTS-1 multiband coverage for detecting previously unknown fracture lineaments despite the presence of a deep glacial overburden. The Illinois Basin is largely covered with glacial drift and few rock outcrops are present. A contribution to the geological understanding of Illinois and Indiana has been made. Analysis of ERTS-1 imagery has provided useful information to the State of Indiana concerning the surface mined lands. The contrast between healthy vegetation and bare ground as imaged by Band 7 is sharp and substantial detail can be obtained concerning the extent of disturbed lands, associated water bodies, large haul roads, and extent of mined lands revegetation. Preliminary results of analysis suggest a reasonable correlation between image-detected fractures and mine roof fall accidents for a few areas investigated. ERTS-1 applications to surface mining operations appear probable, but further investigations are required. The likelihood of applying ERTS-1 derived fracture data to improve coal mine safety in the entire Illinois Basin is suggested from studies conducted in Indiana.

  6. Landuse change detection in a surface coal mine area using multi-temporal high resolution satellite images

    Energy Technology Data Exchange (ETDEWEB)

    Demirel, N.; Duzgun, S.; Kemal Emil, M. [Middle East Technical Univ., Ankara (Turkey). Dept. of Mining Engineering

    2010-07-01

    Changes in the landcover and landuse of a mine area can be caused by surface mining activities, exploitation of ore and stripping and dumping overburden. In order to identify the long-term impacts of mining on the environment and land cover, these changes must be continuously monitored. A facility to regularly observe the progress of surface mining and reclamation is important for effective enforcement of mining and environmental regulations. Remote sensing provides a powerful tool to obtain rigorous data and reduce the need for time-consuming and expensive field measurements. The purpose of this study was to conduct post classification change detection for identifying, quantifying, and analyzing the spatial response of landscape due to surface lignite coal mining activities in Goynuk, Bolu, Turkey, from 2004 to 2008. The paper presented the research algorithm which involved acquiring multi temporal high resolution satellite data; preprocessing the data; performing image classification using maximum likelihood classification algorithm and performing accuracy assessment on the classification results; performing post classification change detection algorithm; and analyzing the results. Specifically, the paper discussed the study area, data and methodology, and image preprocessing using radiometric correction. Image classification and change detection were also discussed. It was concluded that the mine and dump area decreased by 192.5 ha from 2004 to 2008 and was caused by the diminishing reserves in the area and decline in the required production. 5 refs., 2 tabs., 4 figs.

  7. Economic Limit of Coal Mining Closedown in Restructuring Coal Industry

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    One of the key points in restructuring the coal industry is to close some deficient coal mines which haveneither economic result nor social benefit. Based on the relationship among production, cost, and profit, differenteconomic limits for closing coal mines in different cases were put forward. The relationship between the profit andclosedown cost of deficient coal mines was analyzed and an overall economic limit for closing a deficient coal minewas also proposed.

  8. Coal Activities for Secondary Students.

    Science.gov (United States)

    American Coal Foundation, Washington, DC.

    This collection of lesson plans designed for teachers of 4th- through 12th-grade students utilizes an assortment of teaching strategies for topics related to coal and the coal industry. Activities cover the following topics: coal formation; coal identification; "the geologist's dilemma" (a supply and demand activity); geologic time and the…

  9. Transportation of coal by pipeline

    Energy Technology Data Exchange (ETDEWEB)

    Round, G.F.

    1982-01-01

    Discusses Canada's coal resources, technology of long distance coal slurry pipelines, existing and planned coal slurry pipelines, their economics, liquid carbon dioxide, methanol and crude oil instead of water as carrier fluid, and coal slurry research in Canada.

  10. Hydrology of area 15, Eastern Coal province, Kentucky and Tennessee

    Science.gov (United States)

    Leist, David W.; Quinones, Ferdinand; Mull, D.S.; Young, Mary

    1982-01-01

    Area 15, in Eastern Kentucky and Tennessee consists of 3,095 square miles in the Cumberland, Rockcastle and Laurel River basins. The area is underlain by Permian, Pennsylvanian, Mississippian rocks. The Breathitt Formation of Pennsylvanian age crops out in about 75% of the area and contains most of the coal. About 22 million tons of coal were produced in the area in 1978, 52% from surface mines. The terrain is steep with acidic soils. Forestry and pastures are the principal land uses. Precipitation ranges from 47 to 54 inches per year, and the 24-hour 10-year frequency storm averages 4.5 inches. Flood prone areas along the rivers have been defined or can be determined from relations with drainage area and physiography. Low flows are poorly sustained, with most streams draining less than 100 square miles approaching a 7-day 10-year minimum flow of zero. Ground water is generally of good quality, although high iron concentrations are common. Sandstones are the principal aquifers. Water levels fluctuate seasonally, and yields of wells are usually less than 50 gallons per minute but range from about 1 to 250. Mine drainage affects the quality of streamflow at most sites in mined basins. Sulfate concentrations are as high as 1,000 milligrams per liter. Other constituents such as iron and manganese also occur in higher concentrations in waters of mined basins. Acid mine drainage generally is neutralized near its source. Most of the water in streams has pH values in the 7-8 range. (USGS)

  11. The Treatment of Underground Water Gushing and Mine Drainage for the Shengli 1# Surface Mine%胜利1#露天煤矿地下水和疏干废水的治理

    Institute of Scientific and Technical Information of China (English)

    王党朝

    2013-01-01

    Surface mine often suffers from the underground water gushing in its production process. To do the work of underground water gushing well is of great importance in improving production environment, and ensuring the safety of slope. This paper aims to dealing with underground water gushing and drainage in analyzing the measures of Shengli 1# surface mine.%  露天煤矿在生产过程中经常受到地下涌水的影响,做好防治水工作,对改善露天煤矿采场作业条件、保证边坡安全具有十分重要的意义。本文结合胜利1#露天煤矿在防治水工作中采取的措施,浅谈如何做好露天煤矿地下涌水和疏干废水的治理工作。

  12. Impact of surface coal mining and reclamation on the hydrogeology at Iowa Coal Project Demonstration Mine No. 1, Mahaska County, Iowa. [MS thesis

    Energy Technology Data Exchange (ETDEWEB)

    Stangl, D.W.

    1979-07-01

    The groundwater effects of surface mining at ICP No. 1 can be classified primarily as water quality and water quantity effects. The water quantity effects are: the loss of groundwater saturation in spoil materials that were initially removed from over the coal and later replaced; the dewatering of high permeability geologic strata up gradient of mining area; the increase in porosity and possibly permeability in refilled spoil materials; and the change in groundwater gradients in mined areas and near the sediment pond. The water quality effects are: the generation of slightly mineralized enclaves near the sediment pond and spoil accumulations; the generation of thin zones of highly mineralized water near the base of reclaimed spoil probably due mostly to remnant acid mine water; and reduction of water quality in coal seams as a result of dewatering at the time of mining and subsequent oxidation of their pyrite content. Most effects of water quantity loss in and around the mine are not permanent. Water quality disturbances of the fringe areas of reclaimed mine areas will be very slow in attenuating because of the slow groundwater flow through these materials. Adulterated groundwaters in high permeability areas such as the flood plain alluvium will be more quickly attenuated than those in the mine spoil areas, but these enclaves also have the potential to effect much larger areas due to more rapid groundwater movement. Reduced pH and alkalinity were observed in very restricted areas near the east side of the sediment pond.

  13. Coal Mines Security System

    Directory of Open Access Journals (Sweden)

    Ankita Guhe

    2012-05-01

    Full Text Available Geological circumstances of mine seem to be extremely complicated and there are many hidden troubles. Coal is wrongly lifted by the musclemen from coal stocks, coal washeries, coal transfer and loading points and also in the transport routes by malfunctioning the weighing of trucks. CIL —Coal India Ltd is under the control of mafia and a large number of irregularities can be contributed to coal mafia. An Intelligent Coal Mine Security System using data acquisition method utilizes sensor, automatic detection, communication and microcontroller technologies, to realize the operational parameters of the mining area. The data acquisition terminal take the PIC 16F877A chip integrated circuit as a core for sensing the data, which carries on the communication through the RS232 interface with the main control machine, which has realized the intelligent monitoring. Data management system uses EEPROM chip as a Black box to store data permanently and also use CCTV camera for recording internal situation. The system implements the real-time monitoring and displaying for data undermine, query, deletion and maintenance of history data, graphic statistic, report printing, expert diagnosis and decision-making support. The Research, development and Promote Application will provide the safeguard regarding the mine pit control in accuracy, real-time capacity and has high reliability.

  14. Industrial role of coal chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Dierk, E.A.; Stadelhofer, J.W.

    1983-02-07

    The paper is concerned with the production of coal-based chemicals either from the by-products of coal carbonization, or from synthesis gas manufactured from coal. The potential of coal tar as a raw material for chemicals synthesis forms the basis of the paper. Koppers-Totzek and Lurgi gasification processes and Fischer-Tropsch synthesis are considered, and, finally, coal liquefaction processes are briefly mentioned.

  15. Potential minability and economic viability of the Antaramut-Kurtan-Dzoragukh coal field, north-central Armenia; a prefeasibility study

    Science.gov (United States)

    Huber, Douglas W.; Pierce, Brenda S.

    2000-01-01

    The U. S. Geological Survey (USGS) conducted a coal resource assessment of several areas in Armenia from 1997 to 1999. This report, which presents a prefeasibility study of the economic and mining potential of one coal deposit found and studied by the USGS team, was prepared using all data available at the time of the study and the results of the USGS exploratory work, including core drilling, trenching, coal quality analyses, and other ongoing field work. On the basis of information currently available, it is the authors? opinion that a small surface coal mine having about a 20-year life span could be developed in the Antaramut-Kurtan-Dzoragukh coal field, specifically at the Dzoragukh site. The mining organization selected or created to establish the mine will need to conduct necessary development drilling and other work to establish the final feasibility study for the mine. The company will need to be entrepreneurial, profit oriented, and sensitive to the coal consumer; have an analytical management staff; and focus on employee training, safety, and protection of the environment. It is anticipated that any interested parties will be required to submit detailed mining plans to the appropriate Armenian Government agencies. Further development work will be required to reach a final decision regarding the economic feasibility of the mine. However, available information indicates that a small, economic surface mine can be developed at this locality. The small mine suggested is a typical surface-outcropstripping, contour mining operation. In addition, auger mining is strongly suggested, because the recovery of these low-cost mining reserves will help to ensure that the operation will be a viable, economic enterprise. (Auger mining is a system in which large-diameter boreholes are placed horizontally into the coal seam at the final highwall set as the economic limit for the surface mining operation). A special horizontal boring machine, which can be imported from

  16. Clean coal technology: The new coal era

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-01

    The Clean Coal Technology Program is a government and industry cofunded effort to demonstrate a new generation of innovative coal processes in a series of full-scale showcase`` facilities built across the country. Begun in 1986 and expanded in 1987, the program is expected to finance more than $6.8 billion of projects. Nearly two-thirds of the funding will come from the private sector, well above the 50 percent industry co-funding expected when the program began. The original recommendation for a multi-billion dollar clean coal demonstration program came from the US and Canadian Special Envoys on Acid Rain. In January 1986, Special Envoys Lewis and Davis presented their recommendations. Included was the call for a 5-year, $5-billion program in the US to demonstrate, at commercial scale, innovative clean coal technologies that were beginning to emerge from research programs both in the US and elsewhere in the world. As the Envoys said: if the menu of control options was expanded, and if the new options were significantly cheaper, yet highly efficient, it would be easier to formulate an acid rain control plan that would have broader public appeal.

  17. A Systematic Analysis of Coal Accumulation Process

    Institute of Scientific and Technical Information of China (English)

    CHENG Aiguo

    2008-01-01

    Formation of coal seam and coal-rich zone is an integrated result of a series of factors in coal accumulation process. The coal accumulation system is an architectural aggregation of coal accumulation factors. It can be classified into 4 levels: the global coal accumulation super-system, the coal accumulation domain mega.system, the coal accumulation basin system, and the coal seam or coal seam set sub-system. The coal accumulation process is an open, dynamic, and grey system, and is meanwhile a system with such natures as aggregation, relevance, entirety, purpose-orientated, hierarchy, and environment adaptability. In this paper, we take coal accumulation process as a system to study origin of coal seam and coal-rich zone; and we will discuss a methodology of the systematic analysis of coal accumulation process. As an example, the Ordos coal basin was investigated to elucidate the application of the method of the coal accumulation system analysis.

  18. Clean coal initiatives in Indiana

    Science.gov (United States)

    Bowen, B.H.; Irwin, M.W.; Sparrow, F.T.; Mastalerz, Maria; Yu, Z.; Kramer, R.A.

    2007-01-01

    Purpose - Indiana is listed among the top ten coal states in the USA and annually mines about 35 million short tons (million tons) of coal from the vast reserves of the US Midwest Illinois Coal Basin. The implementation and commercialization of clean coal technologies is important to the economy of the state and has a significant role in the state's energy plan for increasing the use of the state's natural resources. Coal is a substantial Indiana energy resource and also has stable and relatively low costs, compared with the increasing costs of other major fuels. This indigenous energy source enables the promotion of energy independence. The purpose of this paper is to outline the significance of clean coal projects for achieving this objective. Design/methodology/approach - The paper outlines the clean coal initiatives being taken in Indiana and the research carried out at the Indiana Center for Coal Technology Research. Findings - Clean coal power generation and coal for transportation fuels (coal-to-liquids - CTL) are two major topics being investigated in Indiana. Coking coal, data compilation of the bituminous coal qualities within the Indiana coal beds, reducing dependence on coal imports, and provision of an emissions free environment are important topics to state legislators. Originality/value - Lessons learnt from these projects will be of value to other states and countries.

  19. Coal potential of Antartica

    Energy Technology Data Exchange (ETDEWEB)

    Rose, G.; McElroy, C.T.

    1987-01-01

    This report attempts to bring together available information on the coal deposits of Antarctica and discuss factors that would be involved if these deposits were to be explored and mined. Most of the reported principal coal deposits in Antarctica lie generally within the Transantarctic Mountains: the majority are of Permian age and are present in the Victoria Group of the Beacon Supergroup. Several other deposits have been recorded in East Antarctica and in the Antarctic Peninsula, including minor occurrences of Mesozoic and Tertiary coal and carbonaceous shale.

  20. Coal-fired generation

    CERN Document Server

    Breeze, Paul

    2015-01-01

    Coal-Fired Generation is a concise, up-to-date and readable guide providing an introduction to this traditional power generation technology. It includes detailed descriptions of coal fired generation systems, demystifies the coal fired technology functions in practice as well as exploring the economic and environmental risk factors. Engineers, managers, policymakers and those involved in planning and delivering energy resources will find this reference a valuable guide, to help establish a reliable power supply address social and economic objectives. Focuses on the evolution of the traditio

  1. The right angle trapezoidal synthesis puts the working surface mining coal craft practice%直角梯形综放工作面采煤工艺实践

    Institute of Scientific and Technical Information of China (English)

    满文; 杜明; 孙计全; 王龙蛟

    2009-01-01

    为提高老矿区煤炭采出率,针对老矿区边角煤,特殊形状工作面(本文以直角梯形工作面为例)开采方法进行介绍,探讨直角梯形综放工作面的开采工艺及边采边撤综放设备应采取的措施和解决方案,提高采出效率,减轻工人劳动强度,实现高产高效.

  2. Coal slurry - a problem of the brown coal industry

    Energy Technology Data Exchange (ETDEWEB)

    Guenther, H.; Hielscher, R.; Mohry, J.

    1983-01-01

    Technological and economic aspects are examined for processing coal-containing waste water from brown coal preparation plants in the German Democratic Republic. In 1979, 106.8 Mm/sup 3/ of coal slurry were produced by the GDR brown coal industry, with a coal fine content ranging between 7.8 g/l and 20.4 g/l. This amounts to 2.6 Mt/y of coal which is 1% of the annual brown coal production. Technological variants of processing and utilizing coal slurry are discussed. At a number of major coal preparation plants, coal slurry is flushed into sedimentation lakes. After a 2 to 3 year drying period, a 6 to 10 m thick layer of coal is recovered. Technologies of coal slurry processing with the aim of recovering coal fines are enumerated. Equipment for these processes include, filters, centrifuges, dryers, etc. Recovered coal can be used as fuel or processed into fertilizer in combination with fly ash and other waste products. 12 references.

  3. Tianjin smokeless coal project

    Energy Technology Data Exchange (ETDEWEB)

    Reuvid, J.M. [Information Services Trans Europe B.V. (Netherlands)

    1997-08-01

    A feasibility study was started to evaluate the technical barriers and the commercial possibilities of forming a joint venture between the Tianjin Coal and Building Materials Company (TCBM) and Coalite hereby coal from the Shanxi coalfields would be converted by the Coalite process to a smokeless fuel, which would reduce Taijin`s heavy level of air pollution. The project was, however, aborted in October 1996 because Tianjin had been allocated a connection to domestic natural gas fields. The project did identify the suitability of coals from the Shanxi coalfields for the Coalite process and the likely market acceptability of the product. It demonstrated the necessity of establishing good contacts in the relevant industries and Ministries in China - and highlighted the benefits of an effective collaboration between three types of organisation - an investment and consultancy company with expertise in China, a UK clean coal technology company, and a local consultant. 4 apps.

  4. Proximate analysis of coal

    Energy Technology Data Exchange (ETDEWEB)

    Donahue, C.J.; Rais, E.A. [University of Michigan, Dearborn, MI (USA)

    2009-02-15

    This lab experiment illustrates the use of thermogravimetric analysis (TGA) to perform proximate analysis on a series of coal samples of different rank. Peat and coke are also examined. A total of four exercises are described. These are dry exercises as students interpret previously recorded scans. The weight percent moisture, volatile matter, fixed carbon, and ash content are determined for each sample and comparisons are made. Proximate analysis is performed on a coal sample from a local electric utility. From the weight percent sulfur found in the coal (determined by a separate procedure the Eschka method) and the ash content, students calculate the quantity of sulfur dioxide emissions and ash produced annually by a large coal-fired electric power plant.

  5. Coal terminal directory

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-06-15

    The directory gives a comprehensive listing of the world's coal terminals, in a total of 50 countries including information on throughput, facilities, storage capacity, and vessel size limitation.

  6. Coal log pipeline for twenty-first century coal transportation

    Energy Technology Data Exchange (ETDEWEB)

    Marrero, T.R.; Liu, H.; Wilkinson, J.E. [Univ. of Missouri, Columbia, MO (United States)

    1998-12-31

    During the first years of the 21st century coal log pipeline (CLP) technology will be available for long-distance coal transportation. The purpose of this report is to present the state-of-the-art of coal log pipeline technology. Some recent developments are as follows: optimization of coal log compaction procedures, construction of a unique coal log prototype manufacturing machine, and its testing. Coal log abrasion while transported in water-filled pipelines is also discussed. A CLP pilot plant is currently under construction at the University of Missouri. For certain routes in the US a CLP system appears to be cost-competitive.

  7. Prospects for coal and clean coal technology in the Philippines

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-03-15

    This report examines the current energy outlook for the Philippines in regard not only to coal but also other energy resources. The history of the power sector, current state of play and future plans to meet the increasing energy demand from a growing population are discussed. There is also analysis of the trends for coal demand and production, imports and exports of coal and the types of coal-fired power stations that have been built. This includes examination of the legislation involving coal and the promotion of clean coal technologies.

  8. Coal facies studies in Canada

    Energy Technology Data Exchange (ETDEWEB)

    Kalkreuth, Wolfgang D. [Laboratorio de Carvao e de Petrologia Organica, Instituto de Geociencias, Universidade Federal do Rio Grande do Sul (UFRGS), Av. Bento Goncalves, 9500, 91501-970 Porto Alegre, RS (Brazil)

    2004-04-23

    The present study is a compilation of published data on coal facies studies in Canada based on coal petrological and other methods. The geological age of the coals range from the Devonian coal deposits in Arctic Canada to coals of Tertiary age in the Western Canada Sedimentary Basin, intermontane British Columbia and Arctic Canada. In terms of rank, the coal deposits studied range from lignite to low volatile bituminous. Coal petrological methods include maceral and microlithotype analyses, frequently integrated with data from palynological and geochemical analyses. Most recently, a number of studies have applied sequence stratigraphic concepts to the coal-bearing strata including the interpretation of coal petrological data in the context of this concept.

  9. COAL QUALITY CONTROL

    Institute of Scientific and Technical Information of China (English)

    孟祥瑞

    1998-01-01

    Coal storing and loading have much more influence on coal quality. In the paper, a goalprogramming model has been constructed to determine the ideal quantity extracting from stockpileand silos and a quality control model is inferred under the guidance of maximum theory ofdispersed number and practice methods are given to meet production demand, with which a coalmine has achieved a better tech-economic result.

  10. American coal imports 2015

    Energy Technology Data Exchange (ETDEWEB)

    Frank Kolojeski [TransGlobal Ventures Corp. (United States)

    2007-09-15

    As 2007 ends, the US coal industry passes two major milestones - the ending of the Synfuel tax break, affecting over 100M st annually, and the imposition of tighter and much more expensive safety measures, particularly in deep mines. Both of these issues, arriving at a time of wretched steam coal price levels, promise to result in a major shake up in the Central Appalachian mining sector. The report utilizes a microeconomic regional approach to determine whether either of these two schools of thought have any validity. Transport, infrastructure, competing fuels and regional issues are examined in detail and this forecasts estimates coal demand and imports on a region by region basis for the years 2010 and 2015. Some of the major highlights of the forecast are: Import growth will be driven by steam coal demand in the eastern and southern US; Transport will continue to be the key driver - we believe that inland rail rates will deter imports from being railed far inland and that the great majority of imports will be delivered directly by vessel, barge or truck to end users; Colombian coal will be the overwhelmingly dominant supply source and possesses a costs structure to enable it to compete with US-produced coal in any market conditions; Most of the growth will come from existing power plants - increasing capacity utilization at existing import facilities and other plants making investments to add imports to the supply portfolio - the growth is not dependent upon a lot of new coal fired capacity being built. Contents of the report are: Key US market dynamics; International supply dynamics; Structure of the US coal import market; and Geographic analysis.

  11. Indicators of coal metamorphism

    Energy Technology Data Exchange (ETDEWEB)

    Proskuryakov, A.E.

    1982-06-01

    Important in determining metamorphism of coal is the reliability of indicators of coalification. Both the reflection of vitrinite and emission of volatile matter have been used for this purpose. To determine which indicator more accurately characterizes metamorphism of coal, their conformity to the following demands was established: 1. uniformity in direction of change of parameters with degree of metamorphism; 2. independence of the indicator of the genetic characteristics of coal (petrographic composition, reduction and oxidation of coal); 3. sensitivity of indicator. Both indicators conform to the first requirement. Emission of volatile substance decreases and reflective capacity of vitrinite increases uniformly with degree of metamorphism. However, the reflectivity of vitrinite is not influenced by petrographic composition of coals and is less dependent on the oxidation and reduction of coal than emission of volatile matter. It is also a more sensitive indicator distinguishing more degrees of metamorphism than emission of volatile matter. Reflectivity of vitrinite is a more reliable indicator of metamorphism than emission of volatile matter. However, in many laboratories this indicator is not measured with sufficient accuracy. To correct this, measuring equipment must be standardized.

  12. Coal in Bulgaria

    Energy Technology Data Exchange (ETDEWEB)

    McConville, L.; Broadbent, J.; Rousaki, K.

    1999-01-01

    Bulgaria`s national energy strategy includes plans to restructure the energy sector by introducing competition and privatisation, to promote energy efficiency and environmental protection and to prepare the country for integration into the EU energy market. Energy prices are still under government control and coal mining is heavily subsidised. Bulgaria is a major producer of coal, all of which is consumed locally. Most of the domestic production is low quality lignite used for electricity generation. Demand for hard coal is met by imports, mainly from the former USSR and the USA. Bulgaria generates almost half of its electricity needs from coal. Total reserves of lignite are estimated at 2.5 Gt. Coal production declined between 1987 and 1991 reflecting the economic disturbance following the break up of the USSR. In 1996, production was 32 Mt. The mining industry is being restructured as Bulgaria is slowly moving from a centrally-controlled economy to a market-based economy. Environmental damage as a result of coal production has been serious in Bulgaria, due to the use of low grade high sulphur content lignite. 84 refs., 10 figs., 9 tabs.

  13. Journal of Coal Science & Engineering(China)

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ Guide for Authors Journal of Coal Science & Engineering(English Edition), a comprehensive academic periodical of the China Coal Society, covers the fields of coal science and technology including coal geology, exploration,mine survey, mine project assessment, mine construction, coal mining, coal mine electrical machinery,mine safety, coal processing and utilization, coal mine environmental protection, etc. It reflects the latest research results and findings.

  14. Trace elements in coal ash

    Science.gov (United States)

    Deonarine, Amrika; Kolker, Allan; Doughten, Michael W.

    2015-01-01

    Coal ash is a residual waste product primarily produced by coal combustion for electric power generation. Coal ash includes fly ash, bottom ash, and flue-gas desulfurization products (at powerplants equipped with flue-gas desulfurization systems). Fly ash, the most common form of coal ash, is used in a range of products, especially construction materials. A new Environmental Protection Agency ruling upholds designation of coal ash as a non-hazardous waste under Subtitle D of the Resource Conservation and Recovery Act, allowing for the continued beneficial use of coal ash and also designating procedures and requirements for its storage.

  15. Coal facies studies in Spain

    Energy Technology Data Exchange (ETDEWEB)

    Suarez-Ruiz, Isabel [INCAR (CSIC), Ap. Co., 73, 33080, Oviedo (Spain); Jimenez, Amalia [Geology, University of Oviedo, 33005, Oviedo (Spain)

    2004-04-23

    This work is a synthesis of the distribution of the main coal basins and sub-basins in Spain as well as the research carried out on their coal facies. The coal fields are distributed through the Paleozoic (mainly Pennsylvanian), Mesozoic (Cretaceous) and Cenozoic times. Peats also exist in the southeast Spain (Granada area), although these types of deposits are not included in this review. Spanish coal basins are both of a paralic and intramontane type and the coal rank is highly variable, from lignite in the case of the younger coal seams to anthracite for those of Carboniferous age.

  16. Coal 99; Kol 99

    Energy Technology Data Exchange (ETDEWEB)

    Sparre, C.

    2000-07-01

    The following report deals with the use of coal and coke during 1998. Some information about techniques, environmental questions and markets are also given. Data have been collected by questionnaires to major users and by telephone to minor users. Preliminary statistical data from Statistics Sweden have also been used. The use of steam coal for heating purposes during 1998 was 680 000 tons and somewhat lower than in 1997. The extremely high figures of 1996 were due to twice the production of electricity because of lack of waterpower. The co-generation plants were the main users of coal. The minor plants have increased their use of forest fuels. Probably the use of steam coal will go down in the immediate years both in the heat generating and the co-generating plants. During the top year 1987 coal was used in 18 hot water plants and 11 co-generation plants. During 1998 these figures are 1 and 8. Taxes and environmental reasons explain this trend. The use of steam coal in the industry has been constant at the level 700 000 tons. This level is supposed to be constant or to vary with business cycles. Steel-works, however, increase their use of steam coal in order to replace the more expensive coke. The import of metallurgical coal in 1998 was 1.6 mill tons like the year before. 1.1 mill tons of coke were produced. The coke consumption in the industry was 1.4 mill tons from which 0.3 mill tons were imported. Several other plants have plans to replace the coal with forest fuels, waste fuels and NG. Even the biggest plant, Vaesteraas, has ordered a block for bio fuels. Helsingborg has started to use wood pellets. The pellets replace most of the coal for the heat production in the co-generation plant. Norrkoeping Kraft AB has put a fluid bed boiler for various fuels into operation, leading to more than half the coal consumption compared with previous years. They have also rebuilt one of their travelling grates for bio fuels. Stockholm Energi, Haesselbyverket, has invested

  17. Method of extracting coal from a coal refuse pile

    Science.gov (United States)

    Yavorsky, Paul M.

    1991-01-01

    A method of extracting coal from a coal refuse pile comprises soaking the coal refuse pile with an aqueous alkali solution and distributing an oxygen-containing gas throughout the coal refuse pile for a time period sufficient to effect oxidation of coal contained in the coal refuse pile. The method further comprises leaching the coal refuse pile with an aqueous alkali solution to solubilize and extract the oxidized coal as alkali salts of humic acids and collecting the resulting solution containing the alkali salts of humic acids. Calcium hydroxide may be added to the solution of alkali salts of humic acid to form precipitated humates useable as a low-ash, low-sulfur solid fuel.

  18. Underground coal gasification - the acceptable face of coal mining?

    Energy Technology Data Exchange (ETDEWEB)

    Dryburgh, P.

    2009-11-15

    There is growing interest in underground coal gasification, whereby energy is accessed from coal in a cleaner way than traditional combustion methods. The paper looks at the benefits of UCG. 1 fig., 1 photo.

  19. Raton Coal Basin boundary, 1999 Coal Resource Assessment

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This ArcView shape file contains a polygon representing the extent of the Raton Coal Basin boundary. This theme was created specifically for the National Coal...

  20. Denver Coal Basin boundary from 1999 National Coal Resource Assessment

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This ArcView shapefile contains a polygon representing the extent of the Denver coal basin boundary. This theme was created specifically for the National Coal...

  1. Coal recovery from a coal waste dump

    Directory of Open Access Journals (Sweden)

    Rozanski Zenon

    2016-01-01

    Full Text Available The possibilities and efficiency of coal recovery from the waste material located at the Central Coal Waste Dump in Poland were presented in this paper. The waste material includes significant amount of fly ash. Research conducted into determination of energetic properties of such wastes showed that the average ash content was 75.75% and the average gross calorific value was 7.81 MJ/kg. Coal was gravitationally separated from the waste material in a pulsatory jig and in a spiral washer including size fractions: 30-5 and 8-0 mm (this was crushed to a size <3.2 mm, respectively. The application of the pulsatory jig (pulse classifier allowed to obtain a high-quality energetic concentrate with the ash content lower than 12% and the gross calorific value higher than 26 MJ/kg (with average yield 7.8%. The spiral separator gave much worse results. The average gross calorific value for the concentrate was 11.6 MJ/kg, with the high ash content 56.5% and yield approximately 26%.

  2. Coal 99; Kol 99

    Energy Technology Data Exchange (ETDEWEB)

    Sparre, C.

    2000-07-01

    The following report deals with the use of coal and coke during 1998. Some information about techniques, environmental questions and markets are also given. Data have been collected by questionnaires to major users and by telephone to minor users. Preliminary statistical data from Statistics Sweden have also been used. The use of steam coal for heating purposes during 1998 was 680 000 tons and somewhat lower than in 1997. The extremely high figures of 1996 were due to twice the production of electricity because of lack of waterpower. The co-generation plants were the main users of coal. The minor plants have increased their use of forest fuels. Probably the use of steam coal will go down in the immediate years both in the heat generating and the co-generating plants. During the top year 1987 coal was used in 18 hot water plants and 11 co-generation plants. During 1998 these figures are 1 and 8. Taxes and environmental reasons explain this trend. The use of steam coal in the industry has been constant at the level 700 000 tons. This level is supposed to be constant or to vary with business cycles. Steel-works, however, increase their use of steam coal in order to replace the more expensive coke. The import of metallurgical coal in 1998 was 1.6 mill tons like the year before. 1.1 mill tons of coke were produced. The coke consumption in the industry was 1.4 mill tons from which 0.3 mill tons were imported. Several other plants have plans to replace the coal with forest fuels, waste fuels and NG. Even the biggest plant, Vaesteraas, has ordered a block for bio fuels. Helsingborg has started to use wood pellets. The pellets replace most of the coal for the heat production in the co-generation plant. Norrkoeping Kraft AB has put a fluid bed boiler for various fuels into operation, leading to more than half the coal consumption compared with previous years. They have also rebuilt one of their travelling grates for bio fuels. Stockholm Energi, Haesselbyverket, has invested

  3. Post-mining policies and practices in the Eastern USA coal region

    Institute of Scientific and Technical Information of China (English)

    Jeff Skousen; Carl E. Zipper

    2014-01-01

    Surface coal mines prior to 1950 in the USA were generally left without any reclamation. As government regulations advanced since then, mine operators were required to backfill the area and plant grasses or trees. After the federal Surface Mining Control and Reclamation Act (SMCRA) was passed in 1977 in the USA, mine operators were required to conduct pre-mining analyses of the site and to designate a land use that could be achieved after mining. Successful reclamation, as needed to satisfy today’s societal demands, requires engineering, design, and purposeful reconstruction of the full mining disturbance, not just its surface, and control of waters leaving the mine site. Effective reclamation on modern American coal mines is fully integrated with the mining operation. A suitable and effective post-mining land use that is sustainable for future generations is crucial to the long-term success and profitability of the mining business and to the future economic benefits of the landowner. Accepted post-mining land uses in the USA are:(1) prime farmland, (2) hay land and pasture, (3) biofuel crops, (4) forestry, (5) wildlife habitat, and (6) building site development. Policies and regulations for each post-mining land use were developed and practices to achieve successful and sustainable land uses were established. Post-mining conditions should provide ecosystem services and produce lands capable of supporting societal needs in the future.

  4. From in situ coal to the final coal product: A case study of the Danville Coal Member (Indiana)

    Science.gov (United States)

    Mastalerz, Maria; Padgett, P.L.

    1999-01-01

    A surface coal mine operation and preparation plant in southwestern Indiana was sampled to examine variations in coal quality and coal petrography parameters for the Danville Coal Member of the Dugger Formation (Pennsylvanian-Desmoinesian, Westphalian D). Representative samples from in situ coal, preparation plant feeds, and a final coal product were collected in order to compare coal quality, coal petrography, trace element concentrations, and ash chemistry of the coal to those of the product. Coal quality parameters of the in situ samples and various feeds, coarse refuse, and final product were variable. The quality of the final coal product was best predicted by the coal quality of the clean coal feed (from the middle portions of the seam). Some trace element contents, especially lead and arsenic, varied between the coal feeds and the product. Lead contents increased in the feeds and product compared to the channel sample of the raw coal, possibly due to contamination in the handling process.A surface coal mine operation and preparation plant in southwestern Indiana was sampled to examine variations in coal quality and coal petrography parameters for the Danville Coal Member of the Dugger Formation (Pennsylvanian-Desmoinesian, Westphalian D). Representative samples from in situ coal, preparation plant feeds, and a final coal product were collected in order to compare coal quality, coal petrography, trace element concentrations, and ash chemistry of the coal to those of the product. Coal quality parameters of the in situ samples and various feeds, coarse refuse, and final product were variable. The quality of the final coal product was best predicted by the coal quality of the clean coal feed (from the middle portions of the seam). Some trace element contents, especially lead and arsenic, varied between the coal feeds and the product. Lead contents increased in the feeds and product compared to the channel sample of the raw coal, possibly due to contamination in

  5. Coal 95; Kol - 95

    Energy Technology Data Exchange (ETDEWEB)

    Sparre, C.

    1995-12-31

    The report deals with the use of coal and coke in Sweden during 1994. Some information about technology, environmental questions and markets are also given. Data have been collected by questionnaires to major users and by telephone to minor users. Preliminary statistical data from Statistics Sweden have also been used.The use of steam coal for heating purposes has been unchanged during 1994 at a level of 1 Mtons. The production in the cogeneration plants has been constant, but has increased for electricity production. The minor plants have increased their use of forest fuels. The use of steam coal will probably go down in the next years both for heat and cogeneration plants. During the top year 1987 coal was used in 18 hot water and 11 cogeneration plants. 1994 these figures are 3 and 12. Taxes and environmental reasons explain this trend. The use of steam coal in industry has been constant at the level 0.7 Mtons. The import of metallurgical coal in 1993 was 1.6 Mtons, like 1992. Import of 0.3 Mtons of coke gives the total consumption of coke in industry as 1.5 Mtons. the average price of steam coal imported to Sweden was 317 SEK/ton, 3% higher than 1993. All Swedish plants meet their emission limit of dust, SO{sub 2} and NO{sub x} as given by county administrations or concession boards. The cogeneration plants all have some SO{sub 2} removal system. The biggest cogeneration plant (Vaesteraas) has recently invested in a SCR NO{sub x} cleaning system. Most other plants use low NO{sub x} burners or SNR injection systems based on ammonia or urea. 2 figs, 13 tabs.

  6. Estimation of Moisture Content in Coal in Coal Mills

    DEFF Research Database (Denmark)

    Odgaard, Peter Fogh; Mataji, Babak

    2006-01-01

    the moisture content of the coal is proposed based on a simple dynamic energy model of a coal mill, which pulverizes and dries the coal before it is burned in the boiler. An optimal unknown input observer is designed to estimate the moisture content based on an energy balance model. The designed moisture...

  7. Estimation of Moisture Content in Coal in Coal Mills

    DEFF Research Database (Denmark)

    Odgaard, Peter Fogh; Mataji, B.

    the moisture content of the coal is proposed based on a simple dynamic energy model of a coal mill, which pulverizes and dries the coal before it is burned in the boiler. An optimal unknown input observer is designed to estimate the moisture content based on an energy balance model. The designed moisture...

  8. Low-rank coal research

    Energy Technology Data Exchange (ETDEWEB)

    Weber, G. F.; Laudal, D. L.

    1989-01-01

    This work is a compilation of reports on ongoing research at the University of North Dakota. Topics include: Control Technology and Coal Preparation Research (SO{sub x}/NO{sub x} control, waste management), Advanced Research and Technology Development (turbine combustion phenomena, combustion inorganic transformation, coal/char reactivity, liquefaction reactivity of low-rank coals, gasification ash and slag characterization, fine particulate emissions), Combustion Research (fluidized bed combustion, beneficiation of low-rank coals, combustion characterization of low-rank coal fuels, diesel utilization of low-rank coals), Liquefaction Research (low-rank coal direct liquefaction), and Gasification Research (hydrogen production from low-rank coals, advanced wastewater treatment, mild gasification, color and residual COD removal from Synfuel wastewaters, Great Plains Gasification Plant, gasifier optimization).

  9. Clean coal - a national urgency

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, S.M.; Sahai, R. [Indian Bureau of Mines, Nagpur (India). Technical Consultancy Division

    2000-07-01

    India is the third largest producer and consumer of coal in the world. Coal generally has a high ash content, thereby requiring that it be cleaned for proper use. Technological advances now make it possible to reduce pollution considerably, even as energy use increases. However, to reduce environmental impacts, technologies for cleaning coal before combustion need to be developed. The paper focuses on the need for clean coal production and the benefits associated with it. Although the country is rich in coal reserves, the generally inferior quality of coal will lead to its depletion if it is not used cleanly. Increasing the proportion of prepared coal from the current level of less than 5% (i.e. 10-11 million tonnes per annum) of all coal consumed will lead to a massive saving. This can be achieved if new washeries are set up, preferably near the coalfields. 2 figs.

  10. China's post-coal growth

    Science.gov (United States)

    Qi, Ye; Stern, Nicholas; Wu, Tong; Lu, Jiaqi; Green, Fergus

    2016-08-01

    Slowing GDP growth, a structural shift away from heavy industry, and more proactive policies on air pollution and clean energy have caused China's coal use to peak. It seems that economic growth has decoupled from growth in coal consumption.

  11. Coal liquefaction processes

    Energy Technology Data Exchange (ETDEWEB)

    Baker, N.R.; Blazek, C.F.; Tison, R.R.

    1979-07-01

    Coal liquefaction is an emerging technology receiving great attention as a possible liquid fuel source. Currently, four general methods of converting coal to liquid fuel are under active development: direct hydrogenation; pyrolysis/hydrocarbonization; solvent extraction; and indirect liquefaction. This work is being conducted at the pilot plant stage, usually with a coal feed rate of several tons per day. Several conceptual design studies have been published recently for large (measured in tens of thousands of tons per day coal feed rate) commercial liquefaction plants, and these reports form the data base for this evaluation. Products from a liquefaction facility depend on the particular method and plant design selected, and these products range from synthetic crude oils up through the lighter hydrocarbon gases, and, in some cases, electricity. Various processes are evaluated with respect to product compositions, thermal efficiency, environmental effects, operating and maintenance requirements, and cost. Because of the large plant capacities of current conceptual designs, it is not clear as to how, and on what scale, coal liquefaction may be considered appropriate as an energy source for Integrated Community Energy Systems (CES). Development work, both currently under way and planned for the future, should help to clarify and quantify the question of applicability.

  12. Sustainable development with clean coal

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-08-01

    This paper discusses the opportunities available with clean coal technologies. Applications include new power plants, retrofitting and repowering of existing power plants, steelmaking, cement making, paper manufacturing, cogeneration facilities, and district heating plants. An appendix describes the clean coal technologies. These include coal preparation (physical cleaning, low-rank upgrading, bituminous coal preparation); combustion technologies (fluidized-bed combustion and NOx control); post-combustion cleaning (particulate control, sulfur dioxide control, nitrogen oxide control); and conversion with the integrated gasification combined cycle.

  13. Integrated coal gasification combined cycle

    Science.gov (United States)

    Richards, P. C.; Wijffels, J.-B.; Zuideveld, P. L.

    Features of the integrated coal gasification combined cycle power plants are described against the backdrop of the development and first commercial application of the shell coal gasification process. Focus is on the efficiency and excellent environmental performance of the integrated coal gasification combined power plants. Current IGCC projects are given together with an outline of some of the options for integrating coal gasification with combined cycles and also other applications of synthesis gas.

  14. Coal type and burnout performance

    Energy Technology Data Exchange (ETDEWEB)

    Lester, E.; Cloke, M. [University of Nottingham, Nottingham (United Kingdom). School of Chemical, Environmental and Mining Engineering

    1999-07-01

    A variety of coals underwent refire tests in a drop tube furnace. Characteristics of the coal fractions, the pyrolysed char fractions and the refired char fractions were compared to determine links between coal composition, intermediate char products and burnout. 9 refs., 1 fig., 2 tabs.

  15. Wanted: Clean Coal Burning Technology

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    China is intent on developing clean coal burning technology, an objective it can achieve through installing desulfurization facilities at coal-burning power plants that will control SO2 emissions and environmental pollution. According to kuo Yi, deputy director general of the Department of Science and Technology of the State Environmental Protection Agency, China is a major coal-buming country:

  16. Measuring Apparatus for Coal Powder

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The measuring apparatus for coal powder, equipped with radioactive source, is a set of device andcan be used to measure the density in the pipes and cumulative consumed amount of coal powder in apower plant, and to examine and display the status of the coal powder input system. It is sketched asFig. 1.

  17. Service Modules for Coal Extraction

    Science.gov (United States)

    Gangal, M. D.; Lewis, E. V.

    1985-01-01

    Service train follows group of mining machines, paying out utility lines as machines progress into coal face. Service train for four mining machines removes gases and coal and provides water and electricity. Flexible, coiling armored carriers protect cables and hoses. High coal production attained by arraying row of machines across face, working side by side.

  18. Coal mining in socioeconomic aspect

    OpenAIRE

    ZALOZNOVA YU. S.

    2014-01-01

    The article investigate the correlation of economic and social factors in the development of coal mining on example of vertically integrated companies with both domestic and foreign assets. The effect of socioeconomic aspects which have led to the American paradox of coal is studied to understand the essence of the coal mining industry at the present stage of the global economic management.

  19. Pyrolysis of coal

    Science.gov (United States)

    Babu, Suresh P.; Bair, Wilford G.

    1992-01-01

    A method for mild gasification of crushed coal in a single vertical elongated reaction vessel providing a fluidized bed reaction zone, a freeboard reaction zone, and an entrained reaction zone within the single vessel. Feed coal and gas may be fed separately to each of these reaction zones to provide different reaction temperatures and conditions in each reaction zone. The reactor and process of this invention provides for the complete utilization of a coal supply for gasification including utilization of caking and non-caking or agglomerating feeds in the same reactor. The products may be adjusted to provide significantly greater product economic value, especially with respect to desired production of char having high surface area.

  20. Crossing point temperature of coal

    Institute of Scientific and Technical Information of China (English)

    Qi Xuyao; Deming Wang; James A. Milke; Xiaoxing Zhong

    2011-01-01

    A further understanding of the self-heating of coal was obtained by investigating the crossing point temperature (CPT) of different ranks of coal. The tests were carried out using a self-designed experimental system for coal self-heating. 50 g (±0.01 g) of coal particles ranging from 0.18 mm to 0.38 mm in size were put into a pure copper reaction vessel attached to the center of a temperature programmed enclosure. The temperature program increased the temperature at a rate of 0.8 ℃/min. Dry air was permitted to flow into the coal reaction vessel at different rates. The surrounding temperature and the coal temperature were monitored by a temperature logger. The results indicate that CPT is affected by coal rank, moisture, sulfur,and the experimental conditions. Higher ranked coals show higher CPT values. A high moisture content causes a delay phenomenon during the self-heating of the coal. Drying at 40 ℃ decreases the effects of moisture. The reactivity of sulfur components in the coal is low under dry and low-temperature conditions.These components form a film that covers the coal surface and slightly inhibits the self-heating of the coal.The flow rate of dry air, and the heating rate of the surroundings, also affect the self-heating of the coal. The most appropriate experimental conditions for coal samples of a given weight and particle size were determined through contrastive analysis. Based on this analysis we propose that CPTs be determined under the same, or nearly the same conditions, for evaluation of the spontaneous combustion of coal.

  1. The 1997 Americas coal conference. Conference proceedings

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    Papers are presented which cover the following topics: Colombian exports of coal; Colombian coal organizations; mining prospects; markets; Venezuela`s mining policy and private coal industry; security situation in Colombia and its effect on the energy industry; transportation; steam coal markets, including USA, Europe and the Eastern Mediterranean, and for high sulfur coal; and innovations in the coal market. 18 papers have been abstracted separately on the IEA Coal Research CD-ROM.

  2. Latent methane in fossil coals

    Energy Technology Data Exchange (ETDEWEB)

    A.D. Alexeev; E.V. Ulyanova; G.P. Starikov; N.N. Kovriga [Academy of Sciences of Ukraine, Donetsk (Ukraine). Institute for Physics of Mining Processes

    2004-07-01

    It is established experimentally using 1H NMR wide line spectroscopy that methane can exist in coals not only in open or closed porosity and fracture systems but also in solid solutions in coal substance, in particular, under methane pressure 2 MPa or higher. Methane dissolved in coal minerals reversibly modifies their lattice parameters as determined from X-ray diffraction analysis. Co-existence of these methane forms in fossil coals causes multi-step desorption kinetics. It is shown experimentally that the long-term latent methane desorption is effected mainly by closed porosity, which in turn is determined by coal rank. 21 refs., 3 figs., 2 tabs.

  3. Coal facies studies in Australia

    Energy Technology Data Exchange (ETDEWEB)

    Crosdale, Peter J. [Coalseam Gas Research Institute, School of Earth Sciences, James Cook University, Townsville, Qld 4814 (Australia)

    2004-04-23

    Despite the economic importance of coal to the Australian economy, detailed studies of controls on variation in coal type are remarkably few. However, important contributions have been made in the understanding of coal facies development. Tertiary lignite deposits of the Gippsland Basin provide key insights into the development of lithotype cyclicity and its relationship to relative sea-level changes, with individual paling-up cycles being correlated to parasequences. Studies of Permian hard coals have identified relationships between coal type and surrounding sediments. Unfortunately, these relationships have been widely over-interpreted in a manner that has diminished their real value.

  4. National Coal Quality Inventory (NACQI)

    Energy Technology Data Exchange (ETDEWEB)

    Robert Finkelman

    2005-09-30

    The U.S. Geological Survey (USGS) conducted the National Coal Quality Inventory (NaCQI) between 1999 and 2005 to address a need for quality information on coals that will be mined during the next 20-30 years. Collaboration between the USGS, State geological surveys, universities, coal burning utilities, and the coal mining industry plus funding support from the Electric Power Research Institute (EPRI) and the U.S. Department of Energy (DOE) permitted collection and submittal of coal samples for analysis. The chemical data (proximate and ultimate analyses; major, minor and trace element concentrations) for 729 samples of raw or prepared coal, coal associated shale, and coal combustion products (fly ash, hopper ash, bottom ash and gypsum) from nine coal producing States are included. In addition, the project identified a new coal reference analytical standard, to be designated CWE-1 (West Elk Mine, Gunnison County, Colorado) that is a high-volatile-B or high-volatile-A bituminous coal with low contents of ash yield and sulfur, and very low, but detectable contents of chlorine, mercury and other trace elements.

  5. The shell coal gasification process

    Energy Technology Data Exchange (ETDEWEB)

    Koenders, L.O.M.; Zuideveld, P.O. [Shell Internationale Petroleum Maatschappij B.V., The Hague (Netherlands)

    1995-12-01

    Future Integrated Coal Gasification Combined Cycle (ICGCC) power plants will have superior environmental performance and efficiency. The Shell Coal Gasification Process (SCGP) is a clean coal technology, which can convert a wide range of coals into clean syngas for high efficiency electricity generation in an ICGCC plant. SCGP flexibility has been demonstrated for high-rank bituminous coals to low rank lignites and petroleum coke, and the process is well suited for combined cycle power generation, resulting in efficiencies of 42 to 46% (LHV), depending on choice of coal and gas turbine efficiency. In the Netherlands, a 250 MWe coal gasification combined cycle plant based on Shell technology has been built by Demkolec, a development partnership of the Dutch Electricity Generating Board (N.V. Sep). The construction of the unit was completed end 1993 and is now followed by start-up and a 3 year demonstration period, after that the plant will be part of the Dutch electricity generating system.

  6. Coal combustion research

    Energy Technology Data Exchange (ETDEWEB)

    Daw, C.S.

    1996-06-01

    This section describes research and development related to coal combustion being performed for the Fossil Energy Program under the direction of the Morgantown Energy Technology Center. The key activity involves the application of chaos theory for the diagnosis and control of fossil energy processes.

  7. Automation in coal mining

    Energy Technology Data Exchange (ETDEWEB)

    Thring, M.W.

    1983-08-01

    A study of the 21st century energy situation shows that coal must be the principal fuel, gradually followed by the renewable fuels which require fossil fuel to make and build the equipment. As oil runs out a substitute liquid fuel will have to be made from coal and from biomass because oil is uniquely suitable for road, sea and air transport and for agriculture. Coal can be mined without men going underground by directed drilling and by Telechirics - hands at a distance. In Telechiric mining, the coal would be won by conventional mining machinery but the human miners would erect, operate, maintain and repair this machinery by sitting in a control room on the surface and controlling telechirs which could move about the mine and would have mechanical hands which would respond exactly to every movement of the human master's hands. He would have touch and force feedback and three dimensional vision so good that he could use his trained craft skill of hands and eyes as though he were down the mine.

  8. Proximate Analysis of Coal

    Science.gov (United States)

    Donahue, Craig J.; Rais, Elizabeth A.

    2009-01-01

    This lab experiment illustrates the use of thermogravimetric analysis (TGA) to perform proximate analysis on a series of coal samples of different rank. Peat and coke are also examined. A total of four exercises are described. These are dry exercises as students interpret previously recorded scans. The weight percent moisture, volatile matter,…

  9. Hard coal; Steinkohle

    Energy Technology Data Exchange (ETDEWEB)

    Loo, Kai van de; Sitte, Andreas-Peter [Gesamtverband Steinkohle e.V. (GVSt), Herne (Germany)

    2015-07-01

    International the coal market in 2014 was the first time in a long time in a period of stagnation. In Germany, the coal consumption decreased even significantly, mainly due to the decrease in power generation. Here the national energy transition has now been noticable affected negative for coal use. The political guidances can expect a further significant downward movement for the future. In the present phase-out process of the German hard coal industry with still three active mines there was in 2014 no decommissioning. But the next is at the end of 2015, and the plans for the time after mining have been continued. [German] International war der Markt fuer Steinkohle 2014 erstmals seit langem wieder von einer Stagnation gekennzeichnet. In Deutschland ging der Steinkohlenverbrauch sogar deutlich zurueck, vor allem wegen des Rueckgangs in der Stromerzeugung. Hier hat sich die nationale Energiewende nun spuerbar und fuer die Steinkohlennutzung negativ ausgewirkt. Die politischen Weichenstellungen lassen fuer die Zukunft eine weitere erhebliche Abwaertsbewegung erwarten. Bei dem im Auslaufprozess befindlichen deutschen Steinkohlenbergbau mit noch drei aktiven Bergwerken gab es 2014 keine Stilllegung. Doch die naechste steht zum Jahresende 2015 an, und die Planungen fuer die Zeit nach dem Bergbau sind fortgefuehrt worden.

  10. Keeping Warm Without Coal

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Heat-pump technology offers a clean heating alternative to coal With no air conditioning or indoor heating, families in southeast Beijing’s Fangzhuang neighbor-hood still enjoy refreshing warm air all year round. The secret is in the pump technology. Heat pumps cool the homes in summer and warm them in winter just like a central air-conditioning system.

  11. Kinetics of coal pyrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Seery, D.J.; Freihaut, J.D.; Proscia, W.M. (United Technologies Research Center, East Hartford, CT (USA)); Howard, J.B.; Peters, W.; Hsu, J.; Hajaligol, M.; Sarofim, A. (Massachusetts Inst. of Tech., Cambridge, MA (USA)); Jenkins, R.; Mallin, J.; Espindola-Merin, B. (Pennsylvania State Univ., University Park, PA (USA)); Essenhigh, R.; Misra, M.K. (Ohio State Univ., Columbus, OH (USA))

    1989-07-01

    This report contains results of a coordinated, multi-laboratory investigation of coal devolatilization. Data is reported pertaining to the devolatilization for bituminous coals over three orders of magnitude in apparent heating rate (100 to 100,000 + {degree}C/sec), over two orders of magnitude in particle size (20 to 700 microns), final particle temperatures from 400 to 1600{degree}C, heat transfer modes ranging from convection to radiative, ambient pressure ranging from near vacuum to one atmosphere pressure. The heat transfer characteristics of the reactors are reported in detail. It is assumed the experimental results are to form the basis of a devolatilization data base. Empirical rate expressions are developed for each phase of devolatilization which, when coupled to an awareness of the heat transfer rate potential of a particular devolatilization reactor, indicate the kinetics emphasized by a particular system reactor plus coal sample. The analysis indicates the particular phase of devolatilization that will be emphasized by a particular reactor type and, thereby, the kinetic expressions appropriate to that devolatilization system. Engineering rate expressions are developed from the empirical rate expressions in the context of a fundamental understanding of coal devolatilization developed in the course of the investigation. 164 refs., 223 figs., 44 tabs.

  12. Coal surface control for advanced physical fine coal cleaning technologies

    Energy Technology Data Exchange (ETDEWEB)

    Morsi, B.I.; Chiang, S.H.; Sharkey, A.; Blachere, J.; Klinzing, G.; Araujo, G.; Cheng, Y.S.; Gray, R.; Streeter, R.; Bi, H.; Campbell, P.; Chiarlli, P.; Ciocco, M.; Hittle, L.; Kim, S.; Kim, Y.; Perez, L.; Venkatadri, R.

    1992-01-01

    This final report presents the research work carried out on the Coal Surface Control for Advanced Physical Fine Coal Cleaning Technologies project, sponsored by the US Department of Energy, Pittsburgh Energy Technology Center (DOE/PETC). The project was to support the engineering development of the selective agglomeration technology in order to reduce the sulfur content of US coals for controlling SO[sub 2] emissions (i.e., acid rain precursors). The overall effort was a part of the DOE/PETCs Acid Rain Control Initiative (ARCI). The overall objective of the project is to develop techniques for coal surface control prior to the advanced physical fine coal cleaning process of selective agglomeration in order to achieve 85% pyrite sulfur rejection at an energy recovery greater than 85% based on run-of-mine coal. The surface control is meant to encompass surface modification during grinding and laboratory beneficiation testing. The project includes the following tasks: Project planning; methods for analysis of samples; development of standard beneficiation test; grinding studies; modification of particle surface; and exploratory R D and support. The coal samples used in this project include three base coals, Upper Freeport - Indiana County, PA, Pittsburgh NO. 8 - Belmont County, OH, and Illinois No. 6 - Randolph County, IL, and three additional coals, Upper Freeport - Grant County- WV, Kentucky No. 9 Hopkins County, KY, and Wyodak - Campbell County, WY. A total of 149 drums of coal were received.

  13. Coal - carriage by sea; 2nd ed.

    Energy Technology Data Exchange (ETDEWEB)

    Rogers, P.; Strange, J.; Studd, B. [SSY Consultancy and Research Ltd., London (United Kingdom)

    1997-04-01

    The book provides a guide to all aspects of the carriage of coal by sea. Part I gives an overview of coal consumption, production and trade, discussing major coal producers, major consumers, and importers and exporters. Part II has chapters on the ships employed to carry coal; problems concerned with the carriage of coal; the loading carrying and discharging of coal; and chartering. Part III covers the origins, properties and utilisation of coal; the petrographic classification of coal; the industrial utilisation of coal; and the principles and techniques of manual and mechanical sampling and analysis of coal. Part IV discusses problems and dangers coal transportation and storage (spontaneous combustion, prevention of freezing), and the role of the cargo superintendent in coal transportation. The text is well supported by tables of statistical data relating to coal production, trade and use. 11 figs., 94 tabs., 4 apps.

  14. Hydrothermal pretreatment of coal

    Energy Technology Data Exchange (ETDEWEB)

    Ross, D.S.

    1989-12-21

    We have examined changes in Argonne Premium samples of Wyodak coal following 30 min treatment in liquid water at autogenous pressures at 150{degrees}, 250{degrees}, and 350{degrees}C. In most runs the coal was initially dried at 60{degrees}C/1 torr/20 hr. The changes were monitored by pyrolysis field ionization mass spectrometry (py-FIMS) operating at 2.5{degrees}C/min from ambient to 500{degrees}C. We recorded the volatility patterns of the coal tars evolved over that temperature range, and in all cases the tar yields were 25%--30% of the starting coal on mass basis. There was essentially no change after the 150{degrees}C treatment. Small increases in volatility were seen following the 250{degrees}C treatment, but major effects were seen in the 350{degrees} work. The tar quantity remained unchanged; however, the volatility increased so the temperature of half volatility for the as-received coal of 400{degrees}C was reduced to 340{degrees}C. Control runs with no water showed some thermal effect, but the net effect from the presence of liquid water was clearly evident. The composition was unchanged after the 150{degrees} and 250{degrees}C treatments, but the 350{degrees} treatment brought about a 30% loss of oxygen. The change corresponded to loss of the elements of water, although loss of OH'' seemed to fit the analysis data somewhat better. The water loss takes place both in the presence and in the absence of added water, but it is noteworthy that the loss in the hydrothermal runs occurs at p(H{sub 2}O) = 160 atm. We conclude that the process must involve the dehydration solely of chemically bound elements of water, the dehydration of catechol is a specific, likely candidate.

  15. National coal utilization assessment: modeling long-term coal production with the Argonne coal market model

    Energy Technology Data Exchange (ETDEWEB)

    Dux, C.D.; Kroh, G.C.; VanKuiken, J.C.

    1977-08-01

    The Argonne Coal Market Model was developed as part of the National Coal Utilization Assessment, a comprehensive study of coal-related environmental, health, and safety impacts. The model was used to generate long-term coal market scenarios that became the basis for comparing the impacts of coal-development options. The model has a relatively high degree of regional detail concerning both supply and demand. Coal demands are forecast by a combination of trend and econometric analysis and then input exogenously into the model. Coal supply in each region is characterized by a linearly increasing function relating increments of new mine capacity to the marginal cost of extraction. Rail-transportation costs are econometrically estimated for each supply-demand link. A quadratic programming algorithm is used to calculate flow patterns that minimize consumer costs for the system.

  16. Proceedings of the 1978 coal chemistry workshop

    Energy Technology Data Exchange (ETDEWEB)

    Radding, S. B.; Peters, H. M. [eds.

    1978-11-01

    Ten papers from the proceedings have been entered individually into EDB and ERA. They deal with the structural chemical analysis of coal and the chemistry of coal gasification and coal liquefaction. DOE's Fossil Energy Program is discussed in detail and recommendations for further research in coal gasification and coal liquefaction are made. (LTN)

  17. Geomorphology of coal seam fires

    Science.gov (United States)

    Kuenzer, Claudia; Stracher, Glenn B.

    2012-02-01

    Coal fires occur in underground natural coal seams, in exposed surface seams, and in coal storage or waste piles. The fires ignite through spontaneous combustion or natural or anthropogenic causes. They are reported from China, India, USA, South Africa, Australia, and Russia, as well as many other countries. Coal fires lead to loss of a valuable resource (coal), the emission of greenhouse-relevant and toxic gases, and vegetation deterioration. A dangerous aspect of the fires is the threat to local mines, industries, and settlements through the volume loss underground. Surface collapse in coal fire areas is common. Thus, coal fires are significantly affecting the evolution of the landscape. Based on more than a decade of experience with in situ mapping of coal fire areas worldwide, a general classification system for coal fires is presented. Furthermore, coal seam fire geomorphology is explained in detail. The major landforms associated with, and induced by, these fires are presented. The landforms include manifestations resulting from bedrock surface fracturing, such as fissures, cracks, funnels, vents, and sponges. Further manifestations resulting from surface bedrock subsidence include sinkholes, trenches, depressions, partial surface subsidence, large surface subsidence, and slides. Additional geomorphologic coal fire manifestations include exposed ash layers, pyrometamorphic rocks, and fumarolic minerals. The origin, evolution, and possible future development of these features are explained, and examples from in situ surveys, as well as from high-resolution satellite data analyses, are presented. The geomorphology of coal fires has not been presented in a systematic manner. Knowledge of coal fire geomorphology enables the detection of underground coal fires based on distinct surface manifestations. Furthermore, it allows judgments about the safety of coal fire-affected terrain. Additionally, geomorphologic features are indicators of the burning stage of fires

  18. Role of coal water mixture in utility coal conversion

    Energy Technology Data Exchange (ETDEWEB)

    Bhagat, N.; Butcher, T.

    1984-05-01

    To indicate the role of coal water mixtures (CWM) in utility coal conversions, the pertinent technical, economic, environmental, and regulatory factors involved in CWM conversion are reviewed. CWM technology provides an attractive option for utility companies to convert to coal. There appear to be no major technical problems in CWM production and use that cannot be overcome. Environmental considerations, however, play an important role in utilities' decisions to convert to coal. In general, coal conversions would be seriously impeded if the installation of flue gas desulfurization units cannot be avoided, as it now can because of the DOE program, and they are also inhibited by present uncertainties regarding impending acid rain regulations. Preliminary estimates of the economics of conversion seem attractive; however, site-specific evaluation is needed to justify conversion in a given situation. Although conversion to pulverized coal appears competitive with that to CWM, some non-economic factors tend to favor CWM over PC.

  19. Computerized estimation of coal reserves of underground coal mines

    Energy Technology Data Exchange (ETDEWEB)

    Solymosi, F.; Kiss, J.

    1988-01-01

    No standardized methodology for long term planning exists in Hungary in the coal industry. A computerized method of coal reserve estimation based on normatives is described. The method has been applied in the Maza-South-Varalja-South region (Transdanubia, South Hungary). The applicability of the method is outlined and the error limit that was missing in coal reserve estimations is suggested to be introduced.

  20. Health impacts of coal and coal use: Possible solutions

    Science.gov (United States)

    Finkelman, R.B.; Orem, W.; Castranova, V.; Tatu, C.A.; Belkin, H.E.; Zheng, B.; Lerch, H.E.; Maharaj, S.V.; Bates, A.L.

    2002-01-01

    Coal will be a dominant energy source in both developed and developing countries for at least the first half of the 21st century. Environmental problems associated with coal, before mining, during mining, in storage, during combustion, and postcombustion waste products are well known and are being addressed by ongoing research. The connection between potential environmental problems with human health is a fairly new field and requires the cooperation of both the geoscience and medical disciplines. Three research programs that illustrate this collaboration are described and used to present a range of human health problems that are potentially caused by coal. Domestic combustion of coal in China has, in some cases, severely affected human health. Both on a local and regional scale, human health has been adversely affected by coals containing arsenic, fluorine, selenium, and possibly, mercury. Balkan endemic nephropathy (BEN), an irreversible kidney disease of unknown origin, has been related to the proximity of Pliocene lignite deposits. The working hypothesis is that groundwater is leaching toxic organic compounds as it passes through the lignites and that these organics are then ingested by the local population contributing to this health problem. Human disease associated with coal mining mainly results from inhalation of particulate matter during the mining process. The disease is Coal Worker's Pneumoconiosis characterized by coal dust-induced lesions in the gas exchange regions of the lung; the coal worker's "black lung disease". ?? 2002 Elsevier Science B.V. All rights reserved.

  1. Flotation and flocculation chemistry of coal and oxidized coals

    Energy Technology Data Exchange (ETDEWEB)

    Somasundaran, P.

    1990-01-01

    The objective of this research project is to understand the fundamentals involved in the flotation and flocculation of coal and oxidized coals and elucidate mechanisms by which surface interactions between coal and various reagents enhance coal beneficiation. An understanding of the nature of the heterogeneity of coal surfaces arising from the intrinsic distribution of chemical moieties is fundamental to the elucidation of mechanism of coal surface modification and its role in interfacial processes such as flotation, flocculation and agglomeration. A new approach for determining the distribution in surface properties of coal particles was developed in this study and various techniques capable of providing such information were identified. Distributions in surface energy, contact angle and wettability were obtained using novel techniques such as centrifugal immersion and film flotation. Changes in these distributions upon oxidation and surface modifications were monitored and discussed. An approach to the modelling of coal surface site distributions based on thermodynamic information obtained from gas adsorption and immersion calorimetry is proposed. Polyacrylamide and dodecane was used to alter the coal surface. Methanol adsorption was also studied. 62 figs.

  2. The Influence of Surface Coal Mining on Runoff Processes and Stream Chemistry in the Elk Valley, British Colubmbia, Canada

    Science.gov (United States)

    Carey, S. K.; Wellen, C. C.; Shatilla, N. J.

    2015-12-01

    Surface mining is a common method of accessing coal. In high-elevation environments, vegetation and soils are typically removed prior to the blasting of overburden rock, thereby allowing access to mineable ore. Following this, the removed overburden rock is deposited in adjacent valleys as waste rock spoils. Previous research has identified that areas downstream of surface coal mining have impaired water quality, yet there is limited information about the interaction of hydrology and geochemistry across a range of mining conditions, particularly at the headwater scale. Here, we provide an analysis of an extensive long-term data set of geochemistry and flows across a gradient of coal mining in the Elk Valley, British Columbia, Canada. This work is part of a broader R&D program examining the influence of surface coal mining on hydrological and water quality responses in the Elk Valley aimed at informing effective management responses. Results indicate that water from waste rock piles has an ionic profile distinct from unimpacted catchments. While the concentration of geochemicals increased with the degree of mine impact, the control of hydrological transport capacity over geochemical export did not vary with degree of mine impact. Geochemical export in mine-influenced catchments was limited more strongly by transport capacity than supply, implying that more water moving through the waste rock mobilized more geochemicals. Placement of waste rock within the catchment (headwaters or outlet) did not affect chemical concentrations but did alter the timing with which chemically distinct water mixed. This work advances on results reported earlier using empirical models of selenium loading and further highlights the importance of limiting water inputs into waste rock piles.

  3. Coal Mining-Related Respiratory Diseases

    Science.gov (United States)

    ... Topics Publications and Products Programs Contact NIOSH NIOSH COAL WORKERS' HEALTH SURVEILLANCE PROGRAM Recommend on Facebook Tweet Share Compartir Coal Mining-Related Respiratory Diseases Coal mining-related respiratory ...

  4. Hydrotreating of coal-derived liquids

    Energy Technology Data Exchange (ETDEWEB)

    Lott, S.E.; Stohl, F.V.; Diegert, K.V. [Sandia National Lab., Albuquerque, NM (United States)] [and others

    1995-12-31

    To develop a database relating hydrotreating parameters to feed and product quality by experimentally evaluating options for hydrotreating whole coal liquids, distillate cuts of coal liquids, petroleum, and blends of coal liquids with petroleum.

  5. Enzymatic desulfurization of coal

    Energy Technology Data Exchange (ETDEWEB)

    Marquis, J.K. (Boston Univ., MA (United States). School of Medicine); Kitchell, J.P. (Holometrix, Inc., Cambridge, MA (United States))

    1988-12-15

    Our current efforts to develop clean coal technology emphasize the advantages of enzymatic desulfurization techniques and have specifically addressed the potential of using partially-purified extracellular microbial enzymes or commercially available enzymes. Our work is focused on the treatment of model'' organic sulfur compounds such as dibenzothiophene (DBT) and ethylphenylsulfide (EPS). Furthermore, we are designing experiments to facilitate the enzymatic process by means of a hydrated organic solvent matrix.

  6. Coal Bed Methane Primer

    Energy Technology Data Exchange (ETDEWEB)

    Dan Arthur; Bruce Langhus; Jon Seekins

    2005-05-25

    During the second half of the 1990's Coal Bed Methane (CBM) production increased dramatically nationwide to represent a significant new source of income and natural gas for many independent and established producers. Matching these soaring production rates during this period was a heightened public awareness of environmental concerns. These concerns left unexplained and under-addressed have created a significant growth in public involvement generating literally thousands of unfocused project comments for various regional NEPA efforts resulting in the delayed development of public and fee lands. The accelerating interest in CBM development coupled to the growth in public involvement has prompted the conceptualization of this project for the development of a CBM Primer. The Primer is designed to serve as a summary document, which introduces and encapsulates information pertinent to the development of Coal Bed Methane (CBM), including focused discussions of coal deposits, methane as a natural formed gas, split mineral estates, development techniques, operational issues, producing methods, applicable regulatory frameworks, land and resource management, mitigation measures, preparation of project plans, data availability, Indian Trust issues and relevant environmental technologies. An important aspect of gaining access to federal, state, tribal, or fee lands involves education of a broad array of stakeholders, including land and mineral owners, regulators, conservationists, tribal governments, special interest groups, and numerous others that could be impacted by the development of coal bed methane. Perhaps the most crucial aspect of successfully developing CBM resources is stakeholder education. Currently, an inconsistent picture of CBM exists. There is a significant lack of understanding on the parts of nearly all stakeholders, including industry, government, special interest groups, and land owners. It is envisioned the Primer would being used by a variety of

  7. Microbial desulfurization of coal

    Energy Technology Data Exchange (ETDEWEB)

    Danzet, C.; Buonfiglio, V.; Polidoro, M.; Valenti, P. (Rome Univ. La Sapienza (Italy). Ist. di Microbiologia)

    This paper reviews the biochemical and economics aspects of coal desulfurization processes involving the use of thermophile microorganisms such as sulfolobus, currently believed to be the the only type of microorganism capable of degrading both inorganic (pyrite-containing) and organic sulfur compounds. Comments are also made on the feasibility of the development of an in-lab, microbial based method for the transformation of the lignin component, obtained in the processing, by anaerobic fermentation, of lignocellulosic biomass, into humic acid.

  8. Spectrum of underground coal gasification in Tianjin

    Energy Technology Data Exchange (ETDEWEB)

    Xu Yongsheng; Bai Xiaohong [Tianjin Urban Construction Inst. (China)

    1997-12-31

    A feasibility study on underground coal gasification in Tianjin is conducted and a program for exploitation of these coal reserves with UCG techniques is suggested. Some issues, such as the coal resources in Tianjin, the geological features of the selected for UCG trial, the characteristics of local coal deposits and the coal quality are discussed. A proposal for a combination of the production of coalbed methane and underground coal gas was summarized.

  9. Mode I fracture toughness of coal

    Energy Technology Data Exchange (ETDEWEB)

    Bhagat, R.B.

    1985-10-01

    This investigation was undertaken to determine the fracture toughness and tensile strength of coal and to correlate these with the grindability of the coals in order to understand the fracture mechanics behaviour of coal. Results showed statistical relationships for the dependence of fracture toughness on the tensile strength of coal and between the fracture toughness and the Hardgrove Grindability Index. Softer coals have a lower fracture toughness value as coal is a brittle material. 16 references.

  10. (Bioprocessing of lignite coals using reductive microorganisms)

    Energy Technology Data Exchange (ETDEWEB)

    Crawford, D.L.

    1990-01-01

    The objectives of this report are to: (1) characterize selected aerobic bacterial strains for their abilities to depolymerize lignite coal polymers, and isolate and identify the extracellular enzymes responsible for depolymerization of the coal; (2) characterize selected strictly anaerobic bacteria, that were previously shown to reductively transform coal substructure model compounds, for the ability to similarly transform polymeric coal; and (3) isolate more strains of anaerobic bacteria by enrichment using additional coal substructure model compounds and coal as substrates.

  11. The Coal Reserves Database Program

    Energy Technology Data Exchange (ETDEWEB)

    Bonskowski, R. (Energy Information Administration, Washington, DC (United States))

    1993-01-01

    The Energy Information Administration (EIA) initiated the Coal Reserves Data Base (CRDB) Program in October, 1990 in order to update and improve the inherent applicability of EIA's national coal reserves database. Currently, EIA's database is derived from the demonstrated reserve base (DRB) of coal, a compilation of data from published sources, unified by adherence to standardized physical criteria of minability, but never intended for the detailed coal supply and policy analyses demanded today. The CRDB Program is designed to engage the expertise available at State geological surveys in compiling best current State-level estimates of both quantities and quality of available coal reserves through cooperative agreements with EIA. The CRDB emphasizes integration of more data on coal quality, use of data from unpublished sources, cooperation with industry and other government sources, and flexibility of criteria to take into account local accessibility and mining conditions and utilize computerized geographic information systems or coal resource software. The results of pilot projects in Ohio and Wyoming are summarized. Areas nominated for support in the program include 15 additional priority coal regions in 14 States, which comprise 95 percent of the current reserve estimates and most of the coal-bearing areas of low sulfur potential. 8 refs., 3 figs., 3 tabs.

  12. The Global Value of Coal

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    Coal plays an essential role in our global energy mix, particularly for power generation; and through that to the alleviation of energy poverty. The use of coal continues to grow rapidly and will continue, together with other fuels, to support world economic and social development particularly in rapidly developing world economies such as China and India. The purpose of this paper is to highlight for policy makers the value of coal to world economic and social development and so encourage development of a policy environment that will allow the coal and electricity industries to make the necessary investments in production capacity and CO2 emissions reduction technologies.

  13. Chemical analyses of coal, coal-associated rocks and coal combustion products collected for the National Coal Quality Inventory

    Science.gov (United States)

    Hatch, Joseph R.; Bullock, John H.; Finkelman, Robert B.

    2006-01-01

    In 1999, the USGS initiated the National Coal Quality Inventory (NaCQI) project to address a need for quality information on coals that will be mined during the next 20-30 years. At the time this project was initiated, the publicly available USGS coal quality data was based on samples primarily collected and analyzed between 1973 and 1985. The primary objective of NaCQI was to create a database containing comprehensive, accurate and accessible chemical information on the quality of mined and prepared United States coals and their combustion byproducts. This objective was to be accomplished through maintaining the existing publicly available coal quality database, expanding the database through the acquisition of new samples from priority areas, and analysis of the samples using updated coal analytical chemistry procedures. Priorities for sampling include those areas where future sources of compliance coal are federally owned. This project was a cooperative effort between the U.S. Geological Survey (USGS), State geological surveys, universities, coal burning utilities, and the coal mining industry. Funding support came from the Electric Power Research Institute (EPRI) and the U.S. Department of Energy (DOE).

  14. Coal Discovery Trail officially opens

    Energy Technology Data Exchange (ETDEWEB)

    Gallinger, C. [Elk Valley Coal Corporation, Sparwood, BC (Canada)

    2004-09-01

    The opening of the 30-kilometre Coal Discovery Trail in August is described. The trail, through a pine, spruce, and larch forest, extends from Sparwood to Fernie and passes through Hosmer, a historic mining site. The trail, part of the Elk Valley Coal Discovery Centre, will be used for hiking, bicycling, horseback riding, and cross-country skiing. The Coal Discovery Centre will provide an interpretive centre that concentrates on history of coal mining and miners, preservation of mining artifacts and sites, and existing technology. 3 figs.

  15. Coal resources of Indiana

    Science.gov (United States)

    Spencer, Frank Darwyn

    1953-01-01

    The Indiana coal field forms the eastern edge of the eastern interior coal basin, which is near some of the most densely populated and highly productive manufacturing areas of the United States. (See fig. 1. ) For this reason Indiana coal reserves are an important State and National asset. In dollar value the coal mining industry is the largest of Indiana's natural-resource-producing industries. The total value of coil production for the year 1950 was more than 100 million dollars, or more than that of all other natural-resource industries in the State combined. As estimated herein, the original coal reserves of Indiana total 37,293 million tons, of which 27,320 million tons is contained in beds more than 42 inches thick; 7,632 million tons in beds 28 to 49. inches thick; and 2,341 million tons in beds 14 to 28 inches thick. The remaining reserves as of January 1951, total 35,806 million tons, of which 18,779 million tons is believed to be recoverable. The distribution of the reserves in these several categories is summarized by counties in table 1. Of the total original reserves of 37,293 million tons, 6,355 million tons can be classified as measured; 8,657 million tons as indicated; and 22,281 million tons as inferred. Strippable reserves constitute 3,524 million tons, or 9.5 percent of the total original reserves. The distribution of the strippable and nonstrippable original reserves is summarized in tables 2 and 3 by counties and by several categories, according to the thickness of the beds and the relative abundance and reliability of the information available for preparing the estimates. The distribution of the estimated 18,779 million tons of recoverable strippable and nonstrippable reserves in Indiana is further summarized by counties in table 4, and the information is presented graphically in figures 2 and 3. The tables i to 4 and figures 2 and 3 include beds in the 14- to 28-inch category, because thin beds have been mined in many places. However, many

  16. Recovery of clean coal from polymer flocculated raw coal slurry

    Energy Technology Data Exchange (ETDEWEB)

    Parekh, B.K.; Chen, Z. [Center for Applied Energy Research, Lexington, KY (US)

    2004-11-01

    The recovery of fine clean coal from waste streams using column flotation is recognized as an efficient and economical technique. However, due to the low percent solids (around 3% by weight) found in these fine waste slurries, the flotation columns have low capacities and are, thus, underutilized. In this study, a 3% (by weight) solids suspension of Upper Freeport coal was flocculated with polymers and concentrated to 10% (by weight) solids. The flocculated slurry was then floated using 250 g/t No. 2 fuel oil and 250 g/t MIBC, which provided a clean coal with 12% ash at an 80% yield. The results showed that flocculated coal could be floated effectively. Zeta potential and contact-angle data showed that the presence of polymer on the surface of the coal did not affect its hydrophobicity, and in some cases it improved the hydrophobicity as indicated by larger contact angles.

  17. Prospects for coal and clean coal technologies in Malaysia

    Energy Technology Data Exchange (ETDEWEB)

    Paul Baruya [IEA Clean Coal Centre, London (United Kingdom)

    2010-07-15

    Malaysia is a regular participant in world coal trade. Coal production is a modest 1 Mt/y but, as an importer, the country trades some 30 Mt/y. As one of ASEAN's most prosperous economies, the expected growth in electricity demand is inevitable. For many years the country has been dependent on gas-fired power, much of which is in the form of expensive single cycle gas turbines. However, coal-fired power has emerged as an important provider of power in a country desperate to improve its energy security. This report looks at how coal-fired power has developed, and examines the current technologies deployed in the country. It is the fourth in a series of reports by the lEA Clean Coal Centre on ASEAN countries, following Indonesia, Thailand and Vietnam. 35 refs., 14 figs., 4 tabs.

  18. CoalVal-A coal resource valuation program

    Science.gov (United States)

    Rohrbacher, Timothy J.; McIntosh, Gary E.

    2010-01-01

    CoalVal is a menu-driven Windows program that produces cost-of-mining analyses of mine-modeled coal resources. Geological modeling of the coal beds and some degree of mine planning, from basic prefeasibility to advanced, must already have been performed before this program can be used. United States Geological Survey mine planning is done from a very basic, prefeasibility standpoint, but the accuracy of CoalVal's output is a reflection of the accuracy of the data entered, both for mine costs and mine planning. The mining cost analysis is done by using mine cost models designed for the commonly employed, surface and underground mining methods utilized in the United States. CoalVal requires a Microsoft Windows? 98 or Windows? XP operating system and a minimum of 1 gigabyte of random access memory to perform operations. It will not operate on Microsoft Vista?, Windows? 7, or Macintosh? operating systems. The program will summarize the evaluation of an unlimited number of coal seams, haulage zones, tax entities, or other area delineations for a given coal property, coalfield, or basin. When the reader opens the CoalVal publication from the USGS website, options are provided to download the CoalVal publication manual and the CoalVal Program. The CoalVal report is divided into five specific areas relevant to the development and use of the CoalVal program: 1. Introduction to CoalVal Assumptions and Concepts. 2. Mine Model Assumption Details (appendix A). 3. CoalVal Project Tutorial (appendix B). 4. Program Description (appendix C). 5. Mine Model and Discounted Cash Flow Formulas (appendix D). The tutorial explains how to enter coal resource and quality data by mining method; program default values for production, operating, and cost variables; and ones own operating and cost variables into the program. Generated summary reports list the volume of resource in short tons available for mining, recoverable short tons by mining method; the seam or property being mined

  19. Evaluating the risk of coal bursts in underground coal mines

    Institute of Scientific and Technical Information of China (English)

    Mark Christopher⇑; Gauna Michael

    2016-01-01

    Coal bursts involve the sudden, violent ejection of coal or rock into the mine workings. They are almost always accompanied by a loud noise, like an explosion, and ground vibration. Bursts are a particular haz-ard for miners because they typically occur without warning. Despite decades of research, the sources and mechanics of these events are not well understood, and therefore they are difficult to predict and control. Experience has shown, however, that certain geologic and mining factors are associated with an increased likelihood of a coal burst. A coal burst risk assessment consists of evaluating the degree to which these risk factors are present, and then identifying appropriate control measures to mitigate the hazard. This paper summarizes the U.S. and international experience with coal bursts, and describes the known risk factors in detail. It includes a framework that can be used to guide the risk assessment process.

  20. Physicochemical properties of Mecsek coal. 2. Coal-gas interactions

    Energy Technology Data Exchange (ETDEWEB)

    Toth, J.; Lakatos, J. [MTA Banyaszati Kemiai Kutatolab, Miskolc (Hungary)

    1995-02-01

    There are two models for interpretation of the internal structure of coals. One of them supposes that the coal structure is similar to the active carbons having macro- and micropores. The second model supposes that the molecules sorbed in the coal are present in a molecular lattice structure. The authors have measured the sorption isotherms and isobars of different gases (nitrogen, methane, carbon dioxide) in coals. They have calculated the equivalent specific surface areas and their temperature dependences. The results have been compared to similar data calculated from methanol-water and methanol-benzene excess isotherms. It was found that the surface areas calculated from gas sorption isotherms and methanol water excess isotherms are comparable. From the methanol-benzene excess isotherms approximately one order of magnitude higher surface areas were obtained. This finding was attributed to the lamellar structure of Mecsek coal and to the intercalated clay minerals.

  1. Progress in developments of dry coal beneficiation

    Institute of Scientific and Technical Information of China (English)

    Yuemin Zhao; Xuliang Yang; Zhenfu Luo; Chenlong Duan; Shulei Song

    2014-01-01

    China’s energy supply heavily relies on coal and China’s coal resource and water resource has a reverse distribution. The problem of water shortages restricts the applications of wet coal beneficiation technologies in drought regions. The present situation highlights the significance and urgency of developing dry beneficiation technologies of coal. Besides, other countries that produce large amounts of coal also encounter serious problem of lack of water for coal beneficiation, such as American, Australia, Canada, South Africa, Turkey and India. Thus, dry coal beneficiation becomes the research hot-points in the field of coal cleaning worldwide in recent years. This paper systematically reviewed the promising research efforts on dry coal beneficiation reported in literature in last 5 years and discussed the progress in developments of dry coal beneficiation worldwide. Finally, we also elaborated the prospects and the challenges of the development of dry coal beneficiation.

  2. Thermography in the coal industry

    Energy Technology Data Exchange (ETDEWEB)

    Van De Ven, H., E-mail: hvandeven@thesnellgroup.com [The Snell Group, Barre, VT (United States)

    2013-03-15

    In the past, maintenance in the coal industry was using the 'run-to-failure' philosophy. This mindset is not only costly; it can also be dangerous. Today, some of the more progressive coal companies are trying to find ways to be more cost effective in their maintenance practices including adding infrared thermography for to their maintenance process. (author)

  3. Coal preparation. Energy program report

    Energy Technology Data Exchange (ETDEWEB)

    Anastas, M.Y.

    1975-06-01

    This is one of several special reports prepared in conjunction with a broad state-of-the-art study on underground coal mining. This report is essentially a review of the current technology of coal preparation and future research needs in this field. (GRA)

  4. Coal: Energy for the future

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-01

    This report was prepared in response to a request by the US Department of energy (DOE). The principal objectives of the study were to assess the current DOE coal program vis-a-vis the provisions of the Energy Policy Act of 1992 (EPACT), and to recommend the emphasis and priorities that DOE should consider in updating its strategic plan for coal. A strategic plan for research, development, demonstration, and commercialization (RDD and C) activities for coal should be based on assumptions regarding the future supply and price of competing energy sources, the demand for products manufactured from these sources, technological opportunities, and the need to control the environmental impact of waste streams. These factors change with time. Accordingly, the committee generated strategic planning scenarios for three time periods: near-term, 1995--2005; mid-term, 2006--2020; and, long-term, 2021--2040. The report is divided into the following chapters: executive summary; introduction and scope of the study; overview of US DOE programs and planning; trends and issues for future coal use; the strategic planning framework; coal preparation, coal liquid mixtures, and coal bed methane recovery; clean fuels and specialty products from coal; electric power generation; technology demonstration and commercialization; advanced research programs; conclusions and recommendations; appendices; and glossary. 174 refs.

  5. Power Generation from Coal 2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    This report focuses mainly on developments to improve the performance of coal-based power generation technologies, which should be a priority -- particularly if carbon capture and storage takes longer to become established than currently projected. A close look is taken of the major ongoing developments in process technology, plant equipment, instrumentation and control. Coal is an important source of energy for the world, particularly for power generation. To meet the growth in demand for energy over the past decade, the contribution from coal has exceeded that of any other energy source. Additionally, coal has contributed almost half of total growth in electricity over the past decade. As a result, CO2 emissions from coal-fired power generation have increased markedly and continue to rise. More than 70% of CO2 emissions that arise from power generation are attributed to coal. To play its role in a sustainable energy future, its environmental footprint must be reduced; using coal more efficiently is an important first step. Beyond efficiency improvement, carbon capture and storage (CCS) must be deployed to make deep cuts in CO2 emissions. The need for energy and the economics of producing and supplying it to the end-user are central considerations in power plant construction and operation. Economic and regulatory conditions must be made consistent with the ambition to achieve higher efficiencies and lower emissions. In essence, clean coal technologies must be more widely deployed.

  6. Supercritical multicomponent solvent coal extraction

    Science.gov (United States)

    Corcoran, W. H.; Fong, W. S.; Pichaichanarong, P.; Chan, P. C. F.; Lawson, D. D. (Inventor)

    1983-01-01

    The yield of organic extract from the supercritical extraction of coal with larger diameter organic solvents such as toluene is increased by use of a minor amount of from 0.1 to 10% by weight of a second solvent such as methanol having a molecular diameter significantly smaller than the average pore diameter of the coal.

  7. Major Changes in Coal Industry

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ In recent years, facing the unprecedented difficulties and challenges such as fuel price increase, supply tension of power coal and increasing pressure of environmental protection, the survival of power enterprises is subjected to certain squeeze. The impact of coal industry on the power industry is increasing.

  8. Coal Mine Methane in Russia

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-07-01

    This paper discusses coal mine methane emissions (CMM) in the Russian Federation and the potential for their productive utilisation. It highlights specific opportunities for cost-effective reductions of CMM from oil and natural gas facilities, coal mines and landfills, with the aim of improving knowledge about effective policy approaches.

  9. Long-term effects of surface coal mining on ground-water levels and quality in two small watersheds in eastern Ohio

    Science.gov (United States)

    Cunningham, W.L.; Jones, R.L.

    1990-01-01

    Two small watersheds in eastern Ohio that were surface mined for coal and reclaimed were studied during 1986-89. Water-level and water-quality data were compared with similar data collected during previous investigations conducted during 1976-83 to determine long-term effects of surface mining on the hydrologic system. Before mining, the watersheds were characterized by sequences of flat-lying sedimentary rocks containing two major coal seams and underclays. An aquifer was present above each of the underclays. Surface mining removed the upper aquifer, stripped the coal seam, and replaced the sediment. This created a new upper aquifer with different hydraulic and chemical characteristics. Mining did not disturb the middle aquifer. A third, deeper aquifer in each watershed was not studied. Water levels were continuously recorded in one well in each aquifer. Other wells were measured every 2 months. Water levels in the upper aquifers reached hydraulic equilibrium from 2 to 5 years after mining ceased. Water levels in the middle aquifers increased more than 5 feet during mining and reached equilibrium almost immediately thereafter. Water samples were collected from three upper-aquifer well, a seep from the upper aquifer, and the stream in each watershed. Two samples were collected in 1986 and 1987, and one each in 1988 and 1989. In both watersheds, sulfate replaced bicarbonate as the dominant upper-aquifer and surface-water anion after mining. For the upper aquifer of a watershed located in Muskingum County, water-quality data were grouped into premining and late postmining time periods (1986-89). The premining median pH and concentration of dissolved solids and sulfate were 7.6, 378 mg/L (milligrams per liter), and 41 mg/L, respectively. The premining median concentrations of iron and manganese were 10? /L (micrograms per liter) and 25?, respectively. The postmining median values of pH, dissolved solids, and sulfate were 6.7, 1,150 mg/L, and 560 mg/L, respectively

  10. Impacts of Coal Seam Gas (Coal Bed Methane) and Coal Mining on Water Resources in Australia

    Science.gov (United States)

    Post, D. A.

    2013-12-01

    Mining of coal bed methane deposits (termed ';coal seam gas' in Australia) is a rapidly growing source of natural gas in Australia. Indeed, expansion of the industry is occurring so quickly that in some cases, legislation is struggling to keep up with this expansion. Perhaps because of this, community concern about the impacts of coal seam gas development is very strong. Responding to these concerns, the Australian Government has recently established an Independent Expert Scientific Committee (IESC) to provide advice to the Commonwealth and state regulators on potential water-related impacts of coal seam gas and large coal mining developments. In order to provide the underlying science to the IESC, a program of ';bioregional assessments' has been implemented. One aim of these bioregional assessments is to improve our understanding of the connectivity between the impacts of coal seam gas extraction and groundwater aquifers, as well as their connection to surface water. A bioregional assessment can be defined as a scientific analysis of the ecology, hydrology, geology and hydrogeology of a bioregion, with explicit assessment of the potential direct, indirect and cumulative impacts of coal seam gas and large coal mining development on water resources. These bioregional assessments are now being carried out across large portions of eastern Australia which are underlain by coal reserves. This presentation will provide an overview of the issues related to the impacts of coal seam gas and coal mining on water resources in Australia. The methodology of undertaking bioregional assessments will be described, and the application of this methodology to six priority bioregions in eastern Australia will be detailed. Preliminary results of the program of research to date will be assessed in light of the requirements of the IESC to provide independent advice to the Commonwealth and State governments. Finally, parallels between the expansion of the industry in Australia with that

  11. The new face of coal

    Energy Technology Data Exchange (ETDEWEB)

    White, G. [Coal Association of Canada, Calgary, AB (Canada)

    2007-09-15

    Coal is particularly abundant in western Canada. The expected increase in coal consumption is at variance with the worldwide demand to reduce greenhouse gas (GHG) emissions. At the current global consumption of 5 billion tonnes per year, 10 billion tonnes of carbon dioxide (CO{sub 2}) are emitted per year from coal alone. Almost none of this coal is captured and ultimately ends up in the earth's atmosphere. Much of the world's coal is used directly for electricity production. This article presented solutions to reduce the CO{sub 2} footprint of coal while expanding consumption at a rate of 74 per cent over 25 years. Nearly every coal-fired power plant in the world is becoming more efficient. Less fuel is being burned to make the same amount of energy, resulting in fewer CO{sub 2} emissions. The newest plants can be as much as 90 per cent more efficient than the oldest. In Canada, many coal-fired plants have heat rate efficiencies of 10,200 KJ/kWh, each producing 0.90 tonnes of CO{sub 2} per kWh. A potential 20 per cent reduction in CO{sub 2} emissions will result if Canada's oldest plants are replaced with best available new coal combustion technology. It is expected that within the next 30 years, almost all of Canada's aging coal-fired plants will require replacement. Interest in the coal gasification process is growing worldwide. Rather than converting coal-fired electricity production to gas, the coal can be converted to form synthesis gas that can readily be used in natural gas-fired power plants to make electricity. The coal gasification process also produces a pure stream of CO{sub 2}, which can be captured as a by-product and sequestered in the earth. CO{sub 2} sequestration is a proven technology and is currently being done with large quantities of CO{sub 2} from an operating gasification plant in North Dakota. The CO{sub 2} is being piped from North Dakota to the Weyburn oil field in Saskatchewan where it is being stored and used to

  12. Surfactant-Assisted Coal Liquefaction

    Science.gov (United States)

    Hickey, Gregory S.; Sharma, Pramod K.

    1993-01-01

    Obtaining liquid fuels from coal which are economically competitive with those obtained from petroleum based sources is a significant challenge for the researcher as well as the chemical industry. Presently, the economics of coal liquefaction are not favorable because of relatively intense processing conditions (temperatures of 430 degrees C and pressures of 2200 psig), use of a costly catalyst, and a low quality product slate of relatively high boiling fractions. The economics could be made more favorable by achieving adequate coal conversions at less intense processing conditions and improving the product slate. A study has been carried out to examine the effect of a surfactant in reducing particle agglomeration and improving hydrodynamics in the coal liquefaction reactor to increase coal conversions...

  13. Development coal tippler facility. [Japan

    Energy Technology Data Exchange (ETDEWEB)

    Hanzawa, F.

    1985-01-01

    Development coal at Mitsui Coal Mining's Ashibetsu mine was previously hauled in tubs through horizontal and inclined roadways to a tippler installed at the -410 m level, where it was transferred to a trunk belt conveyor which took it to the surface. However, when working faces began operating at depths in excess of -600 m, the main inclined shaft winding machine was found to be of insufficient capacity. Accordingly, a tippler for development coal has recently been installed in an unused coal storage pocket at the -600 m level, in conjunction with an extension to the trunk conveyor. The effect of this addition has been to reduce by 75% the amount of development coal handled by tubs in the main inclined shaft, and to reduce the number of operators required, by six.

  14. Research on coal structure indices to coal and gas outbursts in Pingdingshan Mine Area, China

    Institute of Scientific and Technical Information of China (English)

    郭德勇; 宋广太; 库明欣

    2002-01-01

    According to the feature that coal and gas outbursts is controlled by coal structure in Pingdingshan mine area, based on the study of the distribution law of disturbed coal in Mine Area and the macroscopic characteristics of coal structure, the characteristics and genesis to micro-pore of disturbed coal, the relationship between the type of coal structure and gas parameter, and the structural feature of coal at outbursts sites are mainly explored in this paper. Further, the steps and methods are put forward that coal structure indices applied to forecast coal and gas outbursts.

  15. The effect of restructuring on US coal mining labor productivity, 1980-1995

    Energy Technology Data Exchange (ETDEWEB)

    Kuby, M.; Xie, Z. [Arizona State University, Tempe, AZ (USA). Dept. of Geology

    2001-11-01

    From 1980 to 1995, labor productivity in US coal mining almost tripled due to heightened competition, improved labor relations, scale economies, technological change, chronic oversupply, and industry restructuring that halved the number of mines. This paper uses EIA-7A data to analyze the hypothesis that productivity growth may have been caused by closure of small inefficient mines rather than improvement of existing mines, which if true could signal slower future growth. The hypothesis is evaluated using descriptive statistics and histograms of productivity over time, and by analyzing productivity for subsets of mines based on their longevity - including a subset of continuously operating mines unchanged by mine closures. Both methods strongly indicate that productivity growth has not just been the result of attrition of low-productivity mines or an artifact of the shift of production to high-productivity western surface mines. Rather, the evidence shows that in most regions and for most mining methods, both continually existing and new mines have improved steadily. Other factors are discussed, but continued productivity improvement is expected.

  16. Modelling the coal chain

    Energy Technology Data Exchange (ETDEWEB)

    Gertenbach, J.-D.; Varendorff, R. von [Knowledge Based Engineering, Sandton (South Africa)

    1999-03-01

    Managing the supply chain in an integrated coal operation involves many operation and control options often too complex for the human mind to comprehend and react to. By integrating all the knowledge of a supply chain into an expert system, both off-line and on-line real time decisions are possible. Knowledge Based Engineering based in South Africa, has gained valuable experience in modelling such mining operations. The article discusses the methodologies that the company has implemented. KBE uses Gensym`s G2 Real Time Expert System as the foundation of the system and the knowledge base is developed modularly.

  17. Coal, oil and cancer

    Energy Technology Data Exchange (ETDEWEB)

    Steingraber, Sandra

    2011-09-15

    The author believes contaminants in our external environment play a significant role in causing cancer in humans and the cumulative impact of exposure to chemical carcinogens over a lifetime has also to be considered. An efficient method to prevent cancer is to restrict the presence of chemical carcinogens not only indoor, but also in outdoor, environments. Due to collective efforts to reduce tobacco use, lung cancer rates are falling in the USA. Most chemical carcinogens are derived from coal and petroleum, so finding substitutes for these two substances is the right way to proceed in cancer prevention efforts, the author states.

  18. COAL OF THE FUTURE (Supply Prospects for Thermal Coal by 2030-2050)

    OpenAIRE

    2007-01-01

    The report, produced by Messrs. Energy Edge Ltd. (the U.K.) for the JRC Institute for Energy, aims at making a techno-economic analysis of novel extraction technologies for coal and their potential contribution to the global coal supply. These novel extraction technologies include: advanced coal mapping techniques, improved underground coal mining, underground coal gasification and utilisation of coalmine methane gas.

  19. Coal resources, production, and quality in the Eastern kentucky coal field: Perspectives on the future of steam coal production

    Science.gov (United States)

    Hower, J.C.; Hiett, J.K.; Wild, G.D.; Eble, C.F.

    1994-01-01

    The Eastern Kentucky coal field, along with adjacent portions of Virginia and southern West Virginia, is part of the greatest production concentration of high-heating-value, low-sulfur coal in the United States, accounting for over 27% of the 1993 U.S. production of coal of all ranks. Eastern Kentucky's production is spread among many coal beds but is particularly concentrated in a limited number of highquality coals, notably the Pond Creek coal bed and its correlatives, and the Fire Clay coal bed and its correlatives. Both coals are relatively low ash and low sulfur through the areas of the heaviest concentration of mining activity. We discuss production trends, resources, and the quality of in-place and clean coal for those and other major coals in the region. ?? 1994 Oxford University Press.

  20. Coal surface control for advanced fine coal flotation

    Energy Technology Data Exchange (ETDEWEB)

    Fuerstenau, D.W.; Sastry, K.V.S.; Hanson, J.S.; Harris, G.; Sotillo, F.; Diao, J. (California Univ., Berkeley, CA (USA)); Somasundaran, P.; Harris, C.C.; Vasudevan, T.; Liu, D.; Li, C. (Columbia Univ., New York, NY (USA)); Hu, Weibai; Zou, Y.; Chen, W. (Utah Univ., Salt Lake City, UT (USA)); Choudhry, V.; Sehgal, R.; Ghosh, A. (Praxis Engineers, Inc., Milpitas, CA (USA))

    1990-08-15

    The primary objective of this research project is to develop advanced flotation methods for coal cleaning in order to achieve near total pyritic-sulfur removal at 90% Btu recovery, using coal samples procured from six major US coal seams. Concomitantly, the ash content of these coals is to be reduced to 6% or less. Work this quarter concentrated on the following: washability studies, which included particle size distribution of the washability samples, and chemical analysis of washability test samples; characterization studies of induction time measurements, correlation between yield, combustible-material recovery (CMR), and heating-value recovery (HVR), and QA/QC for standard flotation tests and coal analyses; surface modification and control including testing of surface-modifying reagents, restoration of hydrophobicity to lab-oxidized coals, pH effects on coal flotation, and depression of pyritic sulfur in which pyrite depression with calcium cyanide and pyrite depression with xanthated reagents was investigated; flotation optimization and circuitry included staged reagent addition, cleaning and scavenging, and scavenging and middling recycling. Weathering studies are also discussed. 19 figs., 28 tabs.

  1. Characterization of coal water slurry prepared for PRB coal

    Institute of Scientific and Technical Information of China (English)

    Fei Yi; Akshay Gopan; Richard L. Axelbaum

    2014-01-01

    Powder River Basin (PRB) coal, which accounts for over 40% of the coal consumed for power generation in the United States, was investigated for preparation of coal water slurry ( CWS). The static stability and rheology of the CWS were characterized as a function of loading. The coal loading was varied from 30% to 50% and both ionic ( sodium polystyrene sulphonate (PSS)) and nonionic (Triton X-100) surfactants were employed as additives. The addition of PSS to PRB slurries was found to yield poor static stability. On the other hand, Triton X-100 was found to be an effective surfactant, reducing the sedimentation by more than 50% compared to the one without surfactant in 45% CWS. Adding Triton X-100 reduces the viscosity of the CWS for coal loadings of 30% and 40% . Although the viscosities for coal loading of 42. 5% and 45% are higher when Triton X-100 is added, the static stability is significantly better than for samples without surfactant. The highest coal loading for PRB slurry with acceptable viscosity for pumping is 42. 5% .

  2. Formation and retention of methane in coal

    Energy Technology Data Exchange (ETDEWEB)

    Hucka, V.J.; Bodily, D.M.; Huang, H.

    1992-05-15

    The formation and retention of methane in coalbeds was studied for ten Utah coal samples, one Colorado coal sample and eight coal samples from the Argonne Premium Coal Sample Bank.Methane gas content of the Utah and Colorado coals varied from zero to 9 cm{sup 3}/g. The Utah coals were all high volatile bituminous coals. The Colorado coal was a gassy medium volatile bituminous coal. The Argonne coals cover a range or rank from lignite to low volatile bituminous coal and were used to determine the effect of rank in laboratory studies. The methane content of six selected Utah coal seams and the Colorado coal seam was measured in situ using a special sample collection device and a bubble desorbometer. Coal samples were collected at each measurement site for laboratory analysis. The cleat and joint system was evaluated for the coal and surrounding rocks and geological conditions were noted. Permeability measurements were performed on selected samples and all samples were analyzed for proximate and ultimate analysis, petrographic analysis, {sup 13}C NMR dipolar-dephasing spectroscopy, and density analysis. The observed methane adsorption behavior was correlated with the chemical structure and physical properties of the coals.

  3. STUDY ON CLASSIFICATION SYSTEM FOR CHINESE COAL

    Institute of Scientific and Technical Information of China (English)

    陈鹏

    1998-01-01

    An integrated coal classification system-technical/commercial and scientific/geneticclassification in China is discussed in this paper. This system shall enable producers, sellers andpurchasers to communicate unambiguously with regard to the quality of coal complying with therequirements of the respective application. The determination of perfect coal classification systemis an important measure for rational utilization of coal resources.

  4. Geochemistry of vanadium (V) in Chinese coals.

    Science.gov (United States)

    Liu, Yuan; Liu, Guijian; Qu, Qinyuan; Qi, Cuicui; Sun, Ruoyu; Liu, Houqi

    2016-10-11

    Vanadium in coals may have potential environmental and economic impacts. However, comprehensive knowledge of the geochemistry of V in coals is lacking. In this study, abundances, distribution and modes of occurrence of V are reviewed by compiling >2900 reported Chinese coal samples. With coal reserves in individual provinces as the weighting factors, V in Chinese coals is estimated to have an average abundance of 35.81 μg/g. Large variation of V concentration is observed in Chinese coals of different regions, coal-forming periods, and maturation ranks. According to the concentration coefficient of V in coals from individual provinces, three regions are divided across Chinese coal deposits. Vanadium in Chinese coals is probably influenced by sediment source and sedimentary environment, supplemented by late-stage hydrothermal fluids. Specifically, hydrothermal fluids have relatively more significant effect on the enrichment of V in local coal seams. Vanadium in coals is commonly associated with aluminosilicate minerals and organic matter, and the modes of V occurrence in coal depend on coal-forming environment and coal rank. The Chinese V emission inventory during coal combustion is estimated to be 4906 mt in 2014, accounting for 50.55 % of global emission. Vanadium emissions by electric power plants are the largest contributor.

  5. Oxy Coal Combustion at the US EPA

    Science.gov (United States)

    Oxygen enriched coal (oxy-coal) combustion is a developing, and potentially a strategically key technology intended to accommodate direct CO2 recovery and sequestration. Oxy-coal combustion is also intended for retrofit application to existing power plants. During oxy-coal comb...

  6. Characterization of Coal Porosity for Naturally Tectonically Stressed Coals in Huaibei Coal Field, China

    Directory of Open Access Journals (Sweden)

    Xiaoshi Li

    2014-01-01

    Full Text Available The enrichment of coalbed methane (CBM and the outburst of gas in a coal mine are closely related to the nanopore structure of coal. The evolutionary characteristics of 12 coal nanopore structures under different natural deformational mechanisms (brittle and ductile deformation are studied using a scanning electron microscope (SEM and low-temperature nitrogen adsorption. The results indicate that there are mainly submicropores (2~5 nm and supermicropores (4 m2/g, with pore sizes <5 nm in ductile deformed coal. The nanopore structure (<100 nm and its distribution could be affected by macromolecular structure in two ways. Interconversion will occur among the different size nanopores especially in ductile deformed coal.

  7. Bioprocessing of lignite coals using reductive microorganisms

    Energy Technology Data Exchange (ETDEWEB)

    Crawford, D.L.

    1992-03-29

    In order to convert lignite coals into liquid fuels, gases or chemical feedstock, the macromolecular structure of the coal must be broken down into low molecular weight fractions prior to further modification. Our research focused on this aspect of coal bioprocessing. We isolated, characterized and studied the lignite coal-depolymerizing organisms Streptomyces viridosporus T7A, Pseudomonas sp. DLC-62, unidentified bacterial strain DLC-BB2 and Gram-positive Bacillus megaterium strain DLC-21. In this research we showed that these bacteria are able to solubilize and depolymerize lignite coals using a combination of biological mechanisms including the excretion of coal solublizing basic chemical metabolites and extracellular coal depolymerizing enzymes.

  8. Study on combustion characteristics of blended coals

    Energy Technology Data Exchange (ETDEWEB)

    Li Yonghua; Wang Chunbo; Chen Hongwei [North China Electric Power University, Baoding (China)

    2007-02-15

    Power plants in China have to burn blended coal instead of one specific coal for a variety of reasons. So it is of great necessity to investigate the combustion of blended coals. Using a test rig with a capacity of 640 MJ/h with an absolute milling system and flue gas online analysis system, characteristics such as burnout, slag, and pollution of some blended coals were investigated. The ratio of coke and slag as a method of distinguishing coal slagging characteristic was introduced. The results show that the blending of coal has some effect on NOx but there is no obvious rule. SOx emission can be reduced by blending low sulfur coal.

  9. Coal surface control for advanced fine coal flotation

    Energy Technology Data Exchange (ETDEWEB)

    Fuerstenau, D.W.; Hanson, J.S.; Diao, J.; Harris, G.H.; De, A.; Sotillo, F. (California Univ., Berkeley, CA (United States)); Somasundaran, P.; Harris, C.C.; Vasudevan, T.; Liu, D.; Li, C. (Columbia Univ., New York, NY (United States)); Hu, W.; Zou, Y.; Chen, W. (Utah Univ., Salt Lake City, UT (United States)); Choudhry, V.; Shea, S.; Ghosh, A.; Sehgal, R. (Praxis Engineers, Inc., Milpitas, CA (United States))

    1992-03-01

    The initial goal of the research project was to develop methods of coal surface control in advanced froth flotation to achieve 90% pyritic sulfur rejection, while operating at Btu recoveries above 90% based on run-of-mine quality coal. Moreover, the technology is to concomitantly reduce the ash content significantly (to six percent or less) to provide a high-quality fuel to the boiler (ash removal also increases Btu content, which in turn decreases a coal's emission potential in terms of lbs SO{sub 2}/million Btu). (VC)

  10. Forest restoration potentials of coal-mined lands in the eastern United States.

    Science.gov (United States)

    Zipper, C E; Burger, J A; McGrath, J M; Rodrigue, J A; Holtzman, G I

    2011-01-01

    The Appalachian region in the eastern United Sates is home to the Earth's most extensive temperate deciduous forests, but coal mining has caused forest loss and fragmentation. More than 6000 km in Appalachia have been mined for coal since 1980 under the Surface Mining Control and Reclamation Act (SMCRA). We assessed Appalachian areas mined under SMCRA for forest restoration potentials. Our objectives were to characterize soils and vegetation, to compare soil properties with those of pre-SMCRA mined lands that were reforested successfully, and to determine the effects of site age on measured properties. Soils were sampled and dominant vegetation characterized at up to 10 points on each of 25 post-SMCRA mines. Herbaceous species were dominant on 56%, native trees on 24%, and invasive exotics on 16% of assessed areas. Mean values for soil pH (5.8), electrical conductivity (0.07 dS m(-1)), base saturation (89%), and coarse fragment content (50% by mass) were not significantly different from measured levels on the pre-SMCRA forested sites, but silt+clay soil fraction (61%) was higher, bicarbonate-extractable P (4 mg kg(-1)) was lower, and bulk density (1.20 g cm(-1)) was more variable and often unfavorable. Pedogenic N and bicarbonate-extractable P in surface soils increased with site age and with the presence of weathered rocks among coarse fragments. Our results indicate a potential for many of these soils to support productive forest vegetation if replanted and if cultural practices, including temporary control of existing vegetation, soil density mitigation, and fertilization, are applied to mitigate limitations and aid forest tree reestablishment and growth. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

  11. Clean Coal Initiatives in India

    Directory of Open Access Journals (Sweden)

    Sribas Goswami

    2014-08-01

    Full Text Available Availability of, and access to, coal is a crucial element of modern economies and it helps pave the way for human development. Accordingly, the thermal power sector and steel industries have been given a high priority in the national planning processes in India and a concerted focus on enhancing these sectors have resulted in significant gain in generation and availability of electricity and steel in the years since independence. To meet the need of huge demand of power coal is excavated. The process of excavation to the use of coal is potential enough to degrade the environment. Coal Mining is a development activity, which is bound to damage the natural ecosystem by all its activities directly and ancillary, starting from land acquisition to coal beneficiation and use of the products. Huge areas in the Raniganj and Jharia coal field in India have become derelict due to abandoned and active opencast and underground mines. The study is pursued to illustrate the facts which show the urgent need to clean coal mining in India.

  12. Appalachian clean coal technology consortium

    Energy Technology Data Exchange (ETDEWEB)

    Kutz, K.; Yoon, Roe-Hoan [Virginia Polytechnic Institute and State Univ., Blacksburg, VA (United States)

    1995-11-01

    The Appalachian Clean Coal Technology Consortium (ACCTC) has been established to help U.S. coal producers, particularly those in the Appalachian region, increase the production of lower-sulfur coal. The cooperative research conducted as part of the consortium activities will help utilities meet the emissions standards established by the 1990 Clean Air Act Amendments, enhance the competitiveness of U.S. coals in the world market, create jobs in economically-depressed coal producing regions, and reduce U.S. dependence on foreign energy supplies. The research activities will be conducted in cooperation with coal companies, equipment manufacturers, and A&E firms working in the Appalachian coal fields. This approach is consistent with President Clinton`s initiative in establishing Regional Technology Alliances to meet regional needs through technology development in cooperation with industry. The consortium activities are complementary to the High-Efficiency Preparation program of the Pittsburgh Energy Technology Center, but are broader in scope as they are inclusive of technology developments for both near-term and long-term applications, technology transfer, and training a highly-skilled work force.

  13. Gaseous phase coal surface modification

    Energy Technology Data Exchange (ETDEWEB)

    Okoh, J.M.; Pinion, J.; Thiensatit, S.

    1992-05-07

    In this report, we present an improved, feasible and potentially cost effective method of cleaning and beneficiating ultrafine coal. Increased mechanization of mining methods and the need towards depyritization, and demineralization have led to an increase in the quantity of coal fines generated in recent times. For example, the amount of {minus}100 mesh coal occurring in coal preparation plant feeds now typically varies from 5 to 25% of the total feed. Environmental constraints coupled with the greatly increased cost of coal have made it increasingly important to recover more of these fines. Our method chemically modifies the surface of such coals by a series of gaseous phase treatments employing Friedel-Crafts reactions. By using olefins (ethene, propene and butene) and hydrogen chloride catalyst at elevated temperature, the surface hydrophobicity of coal is enhanced. This increased hydrophobicity is manifest in surface phenomena which reflect conditions at the solid/liquid interphase (zeta potential) and those which reflect conditions at the solid/liquid/gas interphases (contact angle, wettability and floatability).

  14. Microscopic characteristics of burst coal seams

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, H.; Wang, C. [Shandong University of Science and Technology (China)

    2000-08-01

    Based on the analytical results of coal samples with microscope and scanning electron microscope, the paper explains the petrographic characteristics and microscopic depredation of burst coal. Quantitative analysis on the components and microstructures of the burst coal is conducted. The influence of the microscopic characteristics on coal burst is discussed. For coal seams with burst tendency, it has provided the necessary forecasting parameters. 2 refs., 1 fig., 2 tabs.

  15. Coal competition: prospects for the 1980s

    Energy Technology Data Exchange (ETDEWEB)

    1981-03-01

    This report consists of 10 chapters which present an historical overview of coal and the part it has played as an energy source in the economic growth of the United States from prior to World War II through 1978. Chapter titles are: definition of coals, coal mining; types of coal mines; mining methods; mining work force; development of coal; mine ownership; production; consumption; prices; exports; and imports. (DMC)

  16. Coal distribution, January--June 1990

    Energy Technology Data Exchange (ETDEWEB)

    1990-10-17

    The Coal Distribution report provides information on coal production, distribution, and stocks in the United States to a wide audience including Congress, federal and state agencies, the coal industry, and the general public. This issue presents information for January through June 1990. Coal distribution data are shown (in tables 1--34) by coal-producing state of origin, consumer use, method of transportation, and state of destination. 6 figs., 34 tabs.

  17. Coal shortage blamed on inadequate transportation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-03-15

    Substantial investment must be made in China's infrastructure if the logistical challenges of moving coal within the country are to be overcome. The railways' monopoly on transporting coal and its poor capability to do so are the two main reasons for the high cost of coal. Foreign investment is nos seen as having prompted improvements in China's ports and its coal mining sector; China is promoting development of a large coal-to-liquids industry.

  18. Basic theory research of coal spontaneous combustion

    Institute of Scientific and Technical Information of China (English)

    WANG Ji-ren; SUN Yan-qiu; ZHAO Qing-fu; DENG Cun-bao; DENG Han-zhong

    2008-01-01

    Discussed latest research results of basic theory research of coal spontaneous combustion in detail, with quantum chemical theory and method and experiment systematically studied chemical structure of coal molecule, adsorption mechanism of coal surface to oxygen molecule and chemical reaction mechanism and process of spontaneous combustion of organic macromolecule and low molecular weight compound in coal from microcosmic view, and established complete theoretical system of the mechanism of coal spontaneous combustion.

  19. Recent Advances in Precombustion Coal Cleaning Processes

    Institute of Scientific and Technical Information of China (English)

    Shiao-HungChiang; DaxinHe

    1994-01-01

    The mineral matter in coal constitutes a major impediment to the direct use of coal in power plants.A concerted effort has been mounted to reduce the ash/sulfur contents in product coal to meet the ever more stringent environmental regulations.In recent years,significant advances have taken place in fine coal cleaning technologies.A review of recent developments in aveanced physical,chemical and biological processes for deep-cleaning of fine coal is presented.

  20. 77 FR 21835 - Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production...

    Science.gov (United States)

    2012-04-11

    ... Internal Revenue Service Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production, and Publication of Inflation Adjustment Factors and Reference Prices for Calendar Year... in determining the availability of the credit for renewable electricity production, refined coal...

  1. 76 FR 21947 - Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production...

    Science.gov (United States)

    2011-04-19

    ... Internal Revenue Service Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production, and Publication of Inflation Adjustment Factors and Reference Prices for Calendar Year... in determining the availability of the credit for renewable electricity production, refined coal...

  2. 75 FR 16576 - Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production...

    Science.gov (United States)

    2010-04-01

    ... Internal Revenue Service Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production, and Publication of Inflation Adjustment Factors and Reference Prices for Calendar Year... in determining the availability of the credit for renewable electricity production, refined coal...

  3. 78 FR 20176 - Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production...

    Science.gov (United States)

    2013-04-03

    ... Internal Revenue Service Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production, and Publication of Inflation Adjustment Factors and Reference Prices for Calendar Year... in determining the availability of the credit for renewable electricity production, refined coal...

  4. Unioned layer of coal resource calculation in the Danforth Hills coal field, Colorado (dan*fing)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Final unioned polygon coverages and shapefiles used to calculate coal resources of the A through G coal zones, Danforth Hills coal field, northwestern Colorado....

  5. Net coal thickness in the Johnson-107 coal zone, South Carbon coalfield, Wyoming (sccat)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This ArcView shapefile contains a representation of the Johnson-107 coal zone net coal thickness. The Johnson-107 coal zone is in the South Carbon coalfield in the...

  6. Experimental study on the variation law of coal temperature during excavation in coal mines

    Institute of Scientific and Technical Information of China (English)

    Yi-Shan PAN; Lian-Man XU; Zhong-Hua LI; Guo-Zhen LI

    2013-01-01

    By testing the temperature of the coal and the stress of the working surface,we got the variation law of coal temperature and coal stress during the excavation.The result shows that the activities of mining affect the coal temperature,the fluctuation of coal temperature and the coal stress is synchronous.During the smooth change of crustal stress,the coal temperature basically keeps unchanged,when the dynamic phenomenon appears,the coal temperature changes,as well the coal stress.Therefore,we can use the online coal temperature monitoring system to test the coal temperature of the working surface continuously,and it can provide basic information for forecasting coal mine power disaster before it happens.

  7. DEVELOPMENT OF COAL DRY BENEFICIATION WITH AIR-DENSE MEDIUM FLUIDIZED BED IN CHINA

    Institute of Scientific and Technical Information of China (English)

    Qingru Chen; Lubin Wei

    2005-01-01

    . The plastic viscosity and yield stress can be obtained by measurement of the terminal settling velocity of spheres and linear regression of the experimental data. Both plastic viscosity and yield stress increase with increasing size of the fluidized particles. The drag coefficient can be calculated with favorable agreement with experimental data.The first dry coal beneficiation plant with air-dense medium fluidized bed was established by CUMT with an output of 320000 t.a-1 and a probable error Ep value up to 0.05 was achieved. The plant was accepted by the Chinese government in June, 1994. Since then, new applications have been found including a 700000 t.a-1 dry coal beneficiation plant put up for commercial testing. To realize coal dry beneficiation of full size range of 300~0 mm, further research on dry coal beneficiation of different size fractions has been under way at the Mineral Processing Research Center of CUMT, leading to the following results:● Dry beneficiation technology with a vibrated air-dense medium fluidized bed for fine coal of size fraction 6~0.5 mm Ash content was reduced from 16.57% to 8.35%, with yield up to 80.20% and Ep value up to 0.065.● Coal dry beneficiation technology with a deep air-dense medium fluidized bed for >50 mm coal An Ep value up to 0.02 was achieved. This technology is of great value for waste removal from 300~50 mm large feedstock, especially for big surface mines in China.● Coal triboelectric cleaning technology for <1 mm pulverized Coal Coal is comminuted down to 320 mesh (0.043 mm) to fully liberate the embedded minerals, yielding an ultra-low ash coal (less than 2%). Currently a pilot system with triboelectric cleaning has successfully passed technical appraisal.● Three-product beneficiation technology with dual-density fluidized bedThis technology yields three products: clean coal, middling and tailing, with the following typical results: Ep value of 0.06~0.09 for the upper layer with a density of 1.5

  8. DEVELOPMENT OF COAL DRY BENEFICIATION WITH AIR-DENSE MEDIUM FLUIDIZED BED IN CHINA

    Institute of Scientific and Technical Information of China (English)

    Qingru; Chen; Lubin; Wei

    2005-01-01

    . The plastic viscosity and yield stress can be obtained by measurement of the terminal settling velocity of spheres and linear regression of the experimental data. Both plastic viscosity and yield stress increase with increasing size of the fluidized particles. The drag coefficient can be calculated with favorable agreement with experimental data.The first dry coal beneficiation plant with air-dense medium fluidized bed was established by CUMT with an output of 320000 t.a-1 and a probable error Ep value up to 0.05 was achieved. The plant was accepted by the Chinese government in June, 1994. Since then, new applications have been found including a 700000 t.a-1 dry coal beneficiation plant put up for commercial testing. To realize coal dry beneficiation of full size range of 300~0 mm, further research on dry coal beneficiation of different size fractions has been under way at the Mineral Processing Research Center of CUMT, leading to the following results:● Dry beneficiation technology with a vibrated air-dense medium fluidized bed for fine coal of size fraction 6~0.5 mm Ash content was reduced from 16.57% to 8.35%, with yield up to 80.20% and Ep value up to 0.065.● Coal dry beneficiation technology with a deep air-dense medium fluidized bed for >50 mm coal An Ep value up to 0.02 was achieved. This technology is of great value for waste removal from 300~50 mm large feedstock, especially for big surface mines in China.● Coal triboelectric cleaning technology for <1 mm pulverized Coal Coal is comminuted down to 320 mesh (0.043 mm) to fully liberate the embedded minerals, yielding an ultra-low ash coal (less than 2%). Currently a pilot system with triboelectric cleaning has successfully passed technical appraisal.● Three-product beneficiation technology with dual-density fluidized bedThis technology yields three products: clean coal, middling and tailing, with the following typical results: Ep value of 0.06~0.09 for the upper layer with a density of 1.5

  9. Joule II - Programme. Clean coal technology R & D. 2nd phase. Volume III. Atmospheric combustion of pulverized coal and coal based blends for power generation

    Energy Technology Data Exchange (ETDEWEB)

    Hein, K.R.G.; Minchener, A.J.; Pruschek, R.; Roberts, P.A. [eds.

    1998-12-31

    Topics covered in this Joule II clean coal technology publication include: coal preparation and blending; cocombustion of coal with biomass and wastes; flame modelling; NO{sub x} abatement by combustion control and staging; coal quality and NO{sub x} emissions; coal combustion properties; and fluidized bed combustion of coal. All papers have been abstracted separately.

  10. Relation between ground-water quality and mineralogy in the coal- producing Norton Formation of Buchanan County, Virginia

    Science.gov (United States)

    Powell, John D.; Larson, Jerry D.

    1985-01-01

    The geochemical processes controlling ground-water chemistry in the coal-producing strata of southwestern Virginia include hydrolysis of silicates, dissolution of carbonates, oxidation of pyrite, cation exchange, and precipitation of secondary minerals, kaolinite and goethite. Core material from the Norton Formation of the Pennsylvania Period is composed of slightly more than one-half sandstone; siltstone and minor amounts of shale, clay, and coal account for the majority of the remainder. Petrographic analyses and x-ray diffraction studies indicate that the sandstone is about 75 percent quartz, 15 percent plagioclase feldspar, 2 percent potassium feldspar, 2 percent muscovite, 4 percent chlorite, and 1 percent siderite. Calcite is present in small amounts and in a few strata as clasts or cement. No limestone strata were identified. The siltstone is about 50 percent quartz, 10 percent plagioclase feldspar, 10 percent mica, 20 percent chlorite, and from 0 to 25 percent siderite. Pyrite is associated with some siltstone and, where present, generally accounts for less than 1 percent. Total sulfur generally constitutes less than 0.1 percent of core samples but about 4 percent in the more pyrite-rich layers. Three reaction models are used to account for the observed water chemistry. The models derive sulfate from pyrite, iron from pyrite and siderite, calcium from plagioclase and calcite, sodium from plagioclase and cation exchange, magnesium from chlorite, and carbon from carbon dioxide, calcite, and siderite. Kaolinite, chalcedony, and goethite are formed authigenically. Carbon-13 data define the relative contributions of carbon sources to models. Comparison of adjacent unmined and mined basins indicates that surface mining significantly increases the weathering reaction of pyrite in contrast to weathering reactions of other minerals. However, in the area studied, reactive pyrite does not appear to be present in sufficient quantities in strata associated with mined

  11. Seismic techniques in coal mining

    Energy Technology Data Exchange (ETDEWEB)

    Bhattacharyya, A.K.; Savidis, G.M.; Belleza, G.V.

    1982-01-01

    This research project is funded by the NERDDC (predominantly) and the Faculty of Applied Science, University of N.S.W. It concerns the study of the extent and degree of peripheral fracturing in pillars in underground coal mines. The peripheral fracturing directly influences the strength of a pillar, which is designed to support the overlying rock mass. The results of this study are expected to facilitate the design of stable pillars which would not be unnecessary large. Thus, the study could lead to the reduction of the unmined coal left in pillars without sacrificing safety in underground coal mines.

  12. PLASMA PYROLYSIS OF BROWN COAL

    OpenAIRE

    Plotczyk, W.; Resztak, A.; A.; Szymanski

    1990-01-01

    The specific energy of the substrate is defined as the ratio of the plasma jet energy to the mass of the coal. The influence of the specific energy of the brown coal (10 - 35 MJ/kg) on the yield and selectivity of the gaseous products formation was determined. The pyrolysis was performed in d.c. arc hydrogen plasma jet with the 25 kW power delivered to it. The higher specific energies of coal correlated to the higher conversion degrees of the substrates to C2H2 and CO as well as to the higher...

  13. Coal transportation by MGR system

    Energy Technology Data Exchange (ETDEWEB)

    Daga, P.R.

    1980-08-01

    34000 tonnes of coal per day will need to be transported nearly 34 km by rail to India's coal-fired Korba Super Thermal Power Project. The Merry-go-Round rail system was adopted because it has a much higher rate of loading and unloading of wagons than the Tippler Arrangement. The route for the railway is described, together with regulations that the route has satisfied. Details are given of the track, wagons, locomotives, loading station, unloading station, signalling, telecommunications, maintenance workshop and total capital costs. The MGR system of coal transportation will provide greater reliability and reduced time factor.

  14. Major new Colombian coal mine

    Energy Technology Data Exchange (ETDEWEB)

    Chadwick, J.

    1998-09-01

    Amcoal with partners Rio Tinto and Glencore, is developing a new large coal export operation in Colombia, following an agreement last year to combine the Cerrejon Centrale and Oreganal coal properties. Three major groups have been awarded a contract to develop the Cerrejon Sur block. Five new mining concessions in the Guajira region south of El Cerrejon will be developed. Colombia has proven and inferred coal reserves amounting to more than 20,000 Mt and hopes to be producing 50 Mt/y by 2005. 1 tab., 1 map.

  15. Carbon Sequestration on Surface Mine Lands

    Energy Technology Data Exchange (ETDEWEB)

    Donald H. Graves; Christopher Barton; Richard Sweigard; Richard Warner

    2005-12-07

    A major effort this quarter was to inventory all the planted areas to evaluate the diameter and height growth as well as determine survival rates. Soil bulk density and compaction continue to be evaluated on all the areas to determine the effects on tree growth and survival. The hydrologic quantity and quality are continuously monitored and quantified. Much effort was also expended in preparing technical presentations for professional meeting and field trips for a variety of audiences.

  16. CARBON SEQUESTRATION ON SURFACE MINE LANDS

    Energy Technology Data Exchange (ETDEWEB)

    Donald H. Graves; Christopher Barton; Richard Sweigard; Richard Warner

    2005-06-22

    An area planted in 2004 on Bent Mountain in Pike County was shifted to the Department of Energy project to centralize an area to become a demonstration site. An additional 98.3 acres were planted on Peabody lands in western Kentucky and Bent Mountain to bring the total area under study by this project to 556.5 acres as indicated in Table 2. Major efforts this quarter include the implementation of new plots that will examine the influence of differing geologic material on tree growth and survival, water quality and quantity and carbon sequestration. Normal monitoring and maintenance was conducted and additional instrumentation was installed to monitor the new areas planted.

  17. CARBON SEQUESTRATION ON SURFACE MINE LANDS

    Energy Technology Data Exchange (ETDEWEB)

    Donald H. Graves; Christopher Barton; Richard Sweigard; Richard Warner

    2005-02-25

    The October-December Quarter was dedicated to analyzing the first two years tree planting activities and evaluation of the results. This included the analyses of the species success at each of the sites and quantifying the data for future year determination of research levels. Additional detailed studies have been planned to further quantify total carbon storage accumulation on the research areas. At least 124 acres of new plantings will be established in 2005 to bring the total to 500 acres or more in the study area across the state of Kentucky. During the first 2 years of activities, 172,000 tree seedlings were planted on 257 acres in eastern Kentucky and 77,520 seedlings were planted on 119 acres in western Kentucky. The quantities of each species was discussed in the first Annual Report. A monitoring program was implemented to measure treatment effects on above and below ground C and nitrogen (N) pools and fluxes. A sampling strategy was devised that will allow for statistical comparisons of the various species within planting conditions and sites. Seedling heights and diameters are measured for initial status and re-measured on an annual basis. Leaves were harvested and leaf area measurements were performed. They were then dried and weighed and analyzed for C and N. Whole trees were removed to determine biomass levels and to evaluate C and N levels in all components of the trees. Clip plots were taken to determine herbaceous production and litter was collected in baskets and gathered each month to quantify C & N levels. Soil samples were collected to determine the chemical and mineralogical characterization of each area. The physical attributes of the soils are also being determined to provide information on the relative level of compaction. Hydrology and water quality monitoring is being conducted on all areas. Weather data is also being recorded that measures precipitation values, temperature, relative humidity wind speed and direction and solar radiation. Detailed studies to address specific questions pertaining to carbon flux are continuing.

  18. CARBON SEQUESTRATION ON SURFACE MINE LANDS

    Energy Technology Data Exchange (ETDEWEB)

    Donald H. Graves; Christopher Barton; Richard Sweigard; Richard Warner

    2004-11-30

    A monitoring program to measure treatment effects on above ground, and below ground carbon and nitrogen pools for the planting areas is being conducted. The collection of soil and tissue samples from both the 2003 and 2004 plantings is complete and are currently being processed in the laboratory. Detailed studies have been initiated to address specific questions pertaining to carbon cycling. Examinations of decomposition and heterotropic respiration on carbon cycling in the reforestation plots were continued during this reporting period. A whole-tree harvesting method was employed to evaluate carbon accumulation as a function of time on the mined site. The trees were extracted from the sites and separated into the following components: foliage, stems, branches, and roots.

  19. CARBON SEQUESTRATION OF SURFACE MINE LANDS

    Energy Technology Data Exchange (ETDEWEB)

    Donald H. Graves; Christopher Barton; Richard Sweigard; Richard Warner

    2004-05-19

    The January-March 2004 Quarter was dedicated to tree planting activities in two locations in Kentucky. During year one of this project there was no available mine land to plant in the Hazard area so 107 acres were planted in the Martin county mine location. This year 120 acres was planted in the Hazard area to compensate for the prior year and an additional 57 acres was planted on Peabody properties in western Kentucky. An additional set of special plots were established on each of these areas that contained 4800 seedlings each for special carbon sequestration determinations. Plantings were also conducted to continue compaction and water quality studies on two newly established areas as well as confirmed measurements on the first years plantings. Total plantings on this project now amount to 357 acres containing 245,960 tree seedlings.

  20. Carbon Sequestration on Surface Mine Lands

    Energy Technology Data Exchange (ETDEWEB)

    Donald H. Graves; Christopher Barton; Bon Jun Koo; Richard Sweigard; Richard Warner

    2004-11-30

    The first quarter of 2004 was dedicated to tree planting activities in two locations in Kentucky. During the first year of this project there was not available mine land to plant in the Hazard area, so 107 acres were planted in the Martin County mine location. This year 120 acres were planted in the Hazard area to compensate for the prior year and an additional 57 acres were planted on Peabody properties in western Kentucky. Additional sets of special plots were established on each of these areas that contained 4800 seedlings each for carbon sequestration demonstrations. Plantings were also conducted to continue compaction and water quality studies on the newly established areas as well as continual measurements of the first year's plantings. Total plantings on this project now amount to 357 acres containing 245,960 seedlings. During the second quarter of this year monitoring systems were established for all the new research areas. Weather data pertinent to the research as well as hydrology and water quality monitoring continues to be conducted on all areas. Studies established to assess specific questions pertaining to carbon flux and the invasion of the vegetation by small mammals are being quantified. Experimental practices initiated with this research project will eventually allow for the planting on long steep slopes with loose grading systems and allow mountain top removal areas to be constructed with loose spoil with no grading of the final layers of rooting material when establishing trees for the final land use designation. Monitoring systems have been installed to measure treatment effects on both above and below ground carbon and nitrogen pools in the planting areas. Soil and tissue samples were collected from both years planting and analyses were conducted in the laboratory. Examination of decomposition and heterotropic respiration on carbon cycling in the reforestation plots continued during the reporting period. Entire planted trees were extracted from the study area to evaluate carbon accumulation as a function of time on the mine sites. These trees were extracted and separated into the following components: foliage, stems, branches, and roots. Each component was evaluated to determine the contribution of each to the total sequestration value. The fourth quarter of the year was devoted to analyzing the first two years tree planting activities and the evaluation of the results. These analyses included the species success at each of the sites and quantifying the data for future year determination of research levels. Additional detailed studies have been planned to further quantify total carbon storage accumulation on the study areas. At least 124 acres of new plantings will be established in 2005 to bring the total to 500 acres or more in the study area across the state of Kentucky.

  1. Prospects For Coal And Clean Coal Technologies In Kazakhstan

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-12-15

    The coal sector in Kazakhstan is said to have enough reserves to last over 100 years, but the forecasted reserves are expected to last several hundreds of years. This makes investing in the fuel and energy sector of the country an attractive option for many international and private organisations. The proven on-shore reserves will ensure extraction for over 30 years for oil and 75 years for gas. The future development of the domestic oil sector depends mainly on developing the Kazakh sector of the Caspian Sea. The coal sector, while not a top priority for the Kazakh government, puts the country among the world's top ten coal-rich countries. Kazakhstan contains Central Asia's largest recoverable coal reserves. In future, the development of the raw materials base will be achieved through enriching and improving the quality of the coal and the deep processing of coal to obtain fluid fuel and synthetic substances. Developing shale is also topical. The high concentration of methane in coal layers makes it possible to extract it and utilise it on a large scale. However, today the country's energy sector, which was largely established in the Soviet times, has reached its potential. Kazakhstan has about 18 GW of installed electricity capacity, of which about 80% is coal fired, most of it built before 1990. Being alert to the impending problems, the government is planning to undertake large-scale modernisation of the existing facilities and construct new ones during 2015-30. The project to modernise the national electricity grid aims to upgrade the power substations to ensure energy efficiency and security of operation. The project will result in installation of modern high-voltage equipment, automation and relay protection facilities, a dispatch control system, monitoring and data processing and energy management systems, automated electricity metering system, as well as a digital corporate telecommunication network.

  2. Prospects for coal and clean coal technologies in Vietnam

    Energy Technology Data Exchange (ETDEWEB)

    Baruya, P. [IEA Clean Coal Centre, London (United Kingdom)

    2010-02-15

    Vietnam's energy economy is largely served by traditional biofuels and oil products. Within the power generating sector, hydropower and gas-fired power dominate. However, Vietnam still maintains a 40 Mt/y coal industry, parts of which have recently undergone a long overdue programme of renovation and expansion. Vietnam has been a successful exporter of anthracite, with more than half of the country's production being shipped or barged to steel mills in Japan or power stations in southern China, as well as most other Far Eastern coal importers. The industry is due to take a different form. Opencast mining has recently accounted for around 60% of production but this mining method could be phased out as reserves become more difficult and costly to extract. A shift to underground mining is expected, with a greater emphasis on more modern and mechanised production techniques. Coal is located mainly in the coalfields in Quang Ninh in the north easternmost province of Vietnam. The lower rank reserves located within the Red River coalfields, close to the existing anthracite operations, may yield many more millions of tonnes of coal for exploitation. Underground coal gasification could possibly be exploited in the deeper reserves of the Red River Basin. While coal production could rapidly change in future years, the power generation sector is also transforming with the country's 12,000 MWe development programme for new coal-fired power capacity. The economy suffers from a threat of power shortages due to a lack of generating and transmission capacity, while inefficiencies blight both energy production and end-users. Delivering power to the regions of growth remains difficult as the economy and the demand for power outpaces power generation. While hydroelectric power is being pursued, coal is therefore becoming a growing factor in the future prosperity of the Vietnamese economy. 111 refs., 33 figs., 11 tabs.

  3. STUDY ON THE RELATIONSHIP BETWEEN THE DIVERSITY COAL MASS STRUCTURE AND LITHOTYPE OF COAL IN MULTI-COAL SEAM MINE

    Institute of Scientific and Technical Information of China (English)

    吴基文; 赵志根; 陈资平

    1999-01-01

    Through site observation and indoor measurements in XieJiaji No.2 Coal Mine in Huainen and Luling Coal Mine in Huaibei, it is discovered that the fragmentation degree are different in different coal seams in same mining district and even in sublevels of the same coal seam, the coal mass structures exist much difference. By analyzing the relationship between the constitution of coal matters and the epigenesis breakage of coal. This paper points out that the internal factor which causes the diversity of the coal mass structure comes from the diversity in the contents of telocollinite and desmocollinite in the vitrinite. The contenet of desmocollinite is higher than that of telocollinite in intact coal seam (sublevel) but the former is less than the later in breaking sublevel, the diversity of constituent content more affects the epigenetic fragmentation degree of coal seam. The content of desrnocollinite proves lower than that of telocollinite in the broken coal seam. The new understanding has directing, and reference for the study of coal petrology, coal mine gas geology and coal methane.

  4. Effectiveness factors for hydroprocessing of coal and coal liquids

    Energy Technology Data Exchange (ETDEWEB)

    Massoth, F.E.; Seader, J.D.

    1990-01-01

    The aim of this research project is to develop a methodology to predict, from a knowledge of feed and catalyst properties, effectiveness factors for catalytic hydroprocessing of coal and coal liquids. To achieve this aim, it is necessary to account for restrictive diffusion, which has not hitherto been done from a fundamental approach under reaction conditions. The research proposed here entails a study of hydrodenitrogenation of model compounds and coal-derived liquids using three NiMo/alumina catalysts of different pore size to develop, for restrictive diffusion, a relationship that can be used for estimating reliable effectiveness factors. The program is divided into four parts: measurements of pertinent properties of the catalysts and of a coal liquid and its derived boiling-point cuts; determination of effective diffusivities and tortuosities of the catalysts; development of restrictive diffusion correlations from data on model N-compounds at reaction conditions; and testing of correlations with coal-liquid cuts and whole coal-liquid feed, modifying correlations as necessary.

  5. Effectiveness factors for hydroprocessing of coal and coal liquids

    Energy Technology Data Exchange (ETDEWEB)

    Massoth, F.E.; Seader, J.D.

    1990-03-29

    The aim of this project is to develop a methodology to predict, from a knowledge of feed and catalyst properties, effectiveness factors for catalytic hydroprocessing of coal and coal liquids. To achieve this aim, it is necessary to account for restrictive diffusion, which has not hitherto been done from a fundamental approach under reaction conditions. The research entails a study of hydrodenitrogenation of model compounds and coal-derived liquids using three NiMo/alumina catalysts of different pore size to develop, for restrictive diffusion, a relationship that can be used for estimating reliable effectiveness factors. The research program includes: Task A - measurement of pertinent properties of the catalysts and of several coal liquids; Task B - determination of effective diffusivities and turtuosities of the catalysts; Task C - development of restrictive diffusion correlations from data on model N-compound reactions; Task D - testing of correlations with coal-liquid cuts and whole coal-liquid feed. Results are presented and discussed from Tasks B and D. 9 refs., 6 figs., 4 tabs.

  6. Coal mine site reclamation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-02-15

    Coal mine sites can have significant effects on local environments. In addition to the physical disruption of land forms and ecosystems, mining can also leave behind a legacy of secondary detrimental effects due to leaching of acid and trace elements from discarded materials. This report looks at the remediation of both deep mine and opencast mine sites, covering reclamation methods, back-filling issues, drainage and restoration. Examples of national variations in the applicable legislation and in the definition of rehabilitation are compared. Ultimately, mine site rehabilitation should return sites to conditions where land forms, soils, hydrology, and flora and fauna are self-sustaining and compatible with surrounding land uses. Case studies are given to show what can be achieved and how some landscapes can actually be improved as a result of mining activity.

  7. Underground gasification of coal

    Energy Technology Data Exchange (ETDEWEB)

    Koranda, J.

    1986-11-01

    A brief history is given of research in Czechoslovakia, which took 3 main factors into account: environmental protection, geological situation and need to produce gas for use both within the plant and elsewhere. In order to assess economic viability, model studies were performed on following mines: Podlesice (North Bohemia), Vatovce (South Slovakia), Syrenov (East Moravia), Zukovsky Hrbet (Ostrava-Karvina), Stonovska (Ostrava-Karvina) and Merkur (North Bohemia). Figures given in tabular form show that underground gasification at these sites would be cheaper than importing natural gas. Problems are discussed associated with underground gasification and it is concluded that research must be conducted into drilling techniques, drill design, methods of cutting through coal seam between shafts, underground generator design, methods of gasifying several seams with one shaft and methods of dealing with residual pillars.

  8. Coal gasification vessel

    Science.gov (United States)

    Loo, Billy W.

    1982-01-01

    A vessel system (10) comprises an outer shell (14) of carbon fibers held in a binder, a coolant circulation mechanism (16) and control mechanism (42) and an inner shell (46) comprised of a refractory material and is of light weight and capable of withstanding the extreme temperature and pressure environment of, for example, a coal gasification process. The control mechanism (42) can be computer controlled and can be used to monitor and modulate the coolant which is provided through the circulation mechanism (16) for cooling and protecting the carbon fiber and outer shell (14). The control mechanism (42) is also used to locate any isolated hot spots which may occur through the local disintegration of the inner refractory shell (46).

  9. Coal Beneficiation by Gas Agglomeration

    Energy Technology Data Exchange (ETDEWEB)

    Thomas D. Wheelock; Meiyu Shen

    2000-03-15

    Coal beneficiation is achieved by suspending coal fines in a colloidal suspension of microscopic gas bubbles in water under atmospheric conditions to form small agglomerates of the fines adhered by the gas bubbles. The agglomerates are separated, recovered and resuspended in water. Thereafter, the pressure on the suspension is increased above atmospheric to deagglomerate, since the gas bubbles are then re-dissolved in the water. During the deagglomeration step, the mineral matter is dispersed, and when the pressure is released, the coal portion of the deagglomerated gas-saturated water mixture reagglomerates, with the small bubbles now coming out of the solution. The reagglomerate can then be separated to provide purified coal fines without the mineral matter.

  10. Oxy-coal Combustion Studies

    Energy Technology Data Exchange (ETDEWEB)

    Wendt, J. [Univ. of Utah, Salt Lake City, UT (United States); Eddings, E. [Univ. of Utah, Salt Lake City, UT (United States); Lighty, J. [Univ. of Utah, Salt Lake City, UT (United States); Ring, T. [Univ. of Utah, Salt Lake City, UT (United States); Smith, P. [Univ. of Utah, Salt Lake City, UT (United States); Thornock, J. [Univ. of Utah, Salt Lake City, UT (United States); Y Jia, W. Morris [Univ. of Utah, Salt Lake City, UT (United States); Pedel, J. [Univ. of Utah, Salt Lake City, UT (United States); Rezeai, D. [Univ. of Utah, Salt Lake City, UT (United States); Wang, L. [Univ. of Utah, Salt Lake City, UT (United States); Zhang, J. [Univ. of Utah, Salt Lake City, UT (United States); Kelly, K. [Univ. of Utah, Salt Lake City, UT (United States)

    2012-01-06

    The objective of this project is to move toward the development of a predictive capability with quantified uncertainty bounds for pilot-scale, single-burner, oxy-coal operation. This validation research brings together multi-scale experimental measurements and computer simulations. The combination of simulation development and validation experiments is designed to lead to predictive tools for the performance of existing air fired pulverized coal boilers that have been retrofitted to various oxy-firing configurations. In addition, this report also describes novel research results related to oxy-combustion in circulating fluidized beds. For pulverized coal combustion configurations, particular attention is focused on the effect of oxy-firing on ignition and coal-flame stability, and on the subsequent partitioning mechanisms of the ash aerosol.

  11. Coal dust: the real cost

    Energy Technology Data Exchange (ETDEWEB)

    Walker, S. [Independent Editorial and Technical Services, Oxford (United Kingdom)

    1998-04-01

    A recent British court case awarded retired coal miners compensation for asthma, chronic bronchitis and emphysema. Although the sums involved were small, large numbers of retired coal miners are likely to be eligible for such awards, as British safety in mines was not substantially worse than most other producers at the time, and was better than many. In some parts of the world safety standards are still poor. Dust suppression should be used on coal cutting machines, and dust controlled in transit. This may prove less expensive than it initially appears since the coal dust can be used instead of lost. This particularly important for transport in open trucks. Employers must also ensure that the safety equipment supplied is both comfortable and used. 3 refs., 5 photos.

  12. Clean Coal Diesel Demonstration Project

    Energy Technology Data Exchange (ETDEWEB)

    Robert Wilson

    2006-10-31

    A Clean Coal Diesel project was undertaken to demonstrate a new Clean Coal Technology that offers technical, economic and environmental advantages over conventional power generating methods. This innovative technology (developed to the prototype stage in an earlier DOE project completed in 1992) enables utilization of pre-processed clean coal fuel in large-bore, medium-speed, diesel engines. The diesel engines are conventional modern engines in many respects, except they are specially fitted with hardened parts to be compatible with the traces of abrasive ash in the coal-slurry fuel. Industrial and Municipal power generating applications in the 10 to 100 megawatt size range are the target applications. There are hundreds of such reciprocating engine power-plants operating throughout the world today on natural gas and/or heavy fuel oil.

  13. Coal conversion. 1977 technical report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-06-01

    The status and progress in US DOE's projects in coal gasification, liquefaction, and fluidized-bed combustion are reviewed with financing, flowsheets, history, progress and status of each (57 projects). (LTN)

  14. Problems of processing alkaline coals

    Energy Technology Data Exchange (ETDEWEB)

    Kheloufi, A.; Biletskyy, V.S. [Donetsk State Technical University, Donetsk (Ukraine). Department of Coal Processing

    1999-07-01

    The desalting and use of salty coals are discussed. Various technologies are compared - desalting by water washing, desalting-hydrotransport, and desalting-agglomeration, and the dewatering process considered. 4 refs., 4 figs.

  15. Progress in Coal Liquefaction Technologies

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Worldwide primary energy consumption is entering an era of pluralism and high quality under the influence of rapid economic development, increasing energy shortage and strict environmental policies. Although renewable energy technology is developing rapidly, fossil fuels (coal, oil and gas) are still the dominant energy sources in the world. As a country rich in coal but short ofoil and gas, China's oil imports have soared in the past few years. Government, research organizations and enterprises in China are paying more and more attention to the processes of converting coal into clean liquid fuels. Direct and indirect coal liquefaction technologies are compared in this paper based on China's current energy status and technological progress not only in China itself but also in the world.

  16. Biological upgrading of coal liquids

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    Culture screening and performance studies were performed with a variety of cultures in removing nitrogen compounds from coal liquid. Two cultures were shown to be effective in removing 17 and 26 percent of the nitrogen in coal liquid as determined by elemental analysis. Experiments will continue in an effort to find additional cultures and isolates able to degrade nitrogen, as well as oxygen and sulfur as heteroatom compounds, from coal liquids. A biological process for upgrading of coal liquids would offer significant advantages, such as operation at ordinary temperature and pressure with better energy efficiency. Of greater importance is the fact that microorganisms do not require an external supply of hydrogen for heteroatom removal, obtaining required hydrogen from water. Furthermore, the biocatalysts are continuously regenerated by growth on the heteroatom compounds. Ring structures are degraded as the heteroatoms are removed. The heteroatoms are in an inocuous form, such as NH[sub 3], SO[sub 4][sup 2[minus

  17. The machinations in coal mining

    Energy Technology Data Exchange (ETDEWEB)

    Round, C.

    1996-12-31

    The book presents a view of coal mining as seen by the author over a career of more than 40 years working in several coalfields in the UK and also undertaking consultancies and visits to coal mines in several other counties. It takes the format of episodes reported by the author of events and discussions with the people involved. There are three strands running through the book. Firstly, there is the biography of a family within the mining industry in the United Kingdom. The second strand of the book reflects the progress in mechanisation within the nationalised coal industry. Thirdly, the book traces the changes in the structural organisation of the British coal industry. The book captures the social side of the mining communities.

  18. Apparatus for solar coal gasification

    Science.gov (United States)

    Gregg, D.W.

    Apparatus for using focused solar radiation to gasify coal and other carbonaceous materials is described. Incident solar radiation is focused from an array of heliostats onto a tower-mounted secondary mirror which redirects the focused solar radiation down through a window onto the surface of a vertically-moving bed of coal, or a fluidized bed of coal, contained within a gasification reactor. The reactor is designed to minimize contact between the window and solids in the reactor. Steam introduced into the gasification reactor reacts with the heated coal to produce gas consisting mainly of carbon monoxide and hydrogen, commonly called synthesis gas, which can be converted to methane, methanol, gasoline, and other useful products. One of the novel features of the invention is the generation of process steam at the rear surface of the secondary mirror.

  19. Ukraine's coal industry

    Energy Technology Data Exchange (ETDEWEB)

    Alexander Ulyanich [Ukrenergy Coal (Russian Federation)

    2005-07-01

    The paper discusses Ukraine's coal mining industry. Ukraine has the 8th place in the world's coal reserves and 10th by volume of production. The industry has declined in recent years - production fell from 135.6 million tons in 1991 to 80.151 million tons in 2004. The Donetsk coal basin is the main producer of Ukraine's power station coal, coking coal and anthracite, mostly of high sulphur content. Coal exports in 2004 amounted to 420 thousand tons. Coal is imported mainly from Russia and Kazakhistan. Ukraine has 13 by-product coke plants, utilizing damp coke quenching technology. The article gives figures for coal transshipment of coal and coke through its ports in 2004. The text of the presentation is accompanied by a file of 34 slides/overviews. 13 figs., 2 tabs.

  20. Preparation of coal slurry with organic solvents.

    Science.gov (United States)

    Shin, Yu-Jen; Shen, Yun-Hwei

    2007-06-01

    In this study, various organic solvents were used to prepare coal slurries and the rheological and thermal properties of coal-organic solvent slurries were examined. Solvents with molecules containing unpaired electrons (high basicity) show high extraction power and cause swelling of coal. Therefore, coal-organic solvent slurries usually showed higher viscosities compared to coal-water slurry. In addition, coal slurries prepared by alcohols and cyclohexanone demonstrated lower settling rates but a high specific sedimentation volume presumably because these solvents swelled coal particles well and led to the formation of weak gel structures in the bulk. In addition, ethanol and cyclohexanone are capable of breaking a considerable amount of hydrogen bonds in coal and subsequently opening up the structures. Thus, more surface area is available for combustion and the combustion rate of coal slurries was increased.

  1. Non-covalent associative structure of coal

    Institute of Scientific and Technical Information of China (English)

    SHUI Heng-fu(水恒福)

    2004-01-01

    The recent progress of non-covalent associative structure of coal, and the mechanisms of the CS2/NMP (1:1 by volume) mixed solvent and the additive addition enhancing the extraction yield of coals were reviewed, and the aggregation behavior of coal in solid and solution states were presented, and the aggregation behavior of coal in solid and solution states were introduced in this paper. Coal extraction and swelling in organic solvents at room temperature were the most useful methods to understand the associative structure of coal. CS2/NMP (1:1 by volume) is a unique solvent to give high extraction yields for some bituminous coals. Some additives can dissociate the stronger interactions among coal molecules and enhance the extraction yields of coal in the mixed solvent.

  2. Facies studies of bituminous coals in Poland

    Energy Technology Data Exchange (ETDEWEB)

    Nowak, Grzegorz J. [Polish Geological Institute, Lower Silesian Branch, al. Jaworowa 19, 53-122, Wroclaw (Poland)

    2004-04-23

    Polish bituminous coal basins are associated exclusively with Carboniferous deposits, differing in origin and geological structure. This paper presents only short review of papers of Polish authors on coal facies studies of Carboniferous coals occurring in the Lower Silesian Coal Basin (LSCB), Upper Silesian Coal Basin (USCB) and Lublin Coal Basin (LCB) of Poland. Facies investigations of Carboniferous coals of Poland have been in progress over 20 years. The results of these studies have provided new information on such subjects as: (1) recognition of main depositional conditions in paleomires, (2) determine prevailing paleoplant communities, (3) appraisal of peat-forming environment reconstruction-types and characteristics of paleomires. These facies analyses are connected to results of such studies as: pure coal petrology, using maceral and microlithotype composition as parameters of the environment of coal deposition, combined results of petrological, palynological and sedimentological studies.

  3. UK coal mining engineering capability

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-03-01

    The document outlines the current position of underground coal mining in the UK and identifies the key suppliers of equipment and services, in the following sections: longwall face machinery; roadway drivage; seismic exploration; ventilation; methane drainage; underground transport; electrical and control systems; underground safety; research and development; consultancy services; coal associations. A directory of 43 companies organizations and academic institutions is included. 13 figs., 1 tab.

  4. Land reclamation beautifies coal mines

    Energy Technology Data Exchange (ETDEWEB)

    Coblentz, B. [MSU Ag Communications (United States)

    2009-07-15

    The article explains how the Mississippi Agricultural and Forestry Experiments station, MAFES, has helped prepare land exploited by strip mining at North American Coal Corporation's Red Hills Mine. The 5,800 acre lignite mine is over 200 ft deep and uncovers six layers of coal. About 100 acres of land a year is mined and reclaimed, mostly as pine plantations. 5 photos.

  5. Coal facies studies in Denmark and Greenland

    Energy Technology Data Exchange (ETDEWEB)

    Petersen, Henrik I. [Geological Survey of Denmark and Greenland (GEUS), Department of Reservoir Geology, Oester Voldgade 10, DK-1350 Copenhagen K (Denmark)

    2004-04-23

    Coal of Jurassic age occurs onshore Denmark and in the Danish North Sea, whereas coal of Carboniferous and Miocene age only occurs in the Danish North Sea and onshore Denmark, respectively. The Lower-Middle Jurassic coals are the most widespread and best documented. Onshore Denmark the coals are of low rank while the Jurassic coals in the North Sea are thermally mature and hydrocarbon generating in the Soegne Basin. The Jurassic coals have a maximum thickness of similar2 m and were formed in coastal plain mires and in inland fresh water mires. The Miocene brown coals, up to similar2 m thick, were formed in an overall deltaic setting. Lower Carboniferous and Palaeogene coals occur in northern Greenland, Middle Jurassic coals in northeast Greenland, and Cretaceous coals in western Greenland. The Middle Jurassic low rank coals have been investigated in detail. The up to similar3.5-m-thick coal seams accumulated in coastal mires and they may have an extraordinary resinite-enriched composition. Only a single Cretaceous coal seam has been investigated with regard to the depositional environment; the seam records drowning of a peat mire. The Lower Carboniferous and Palaeogene coals have not been investigated.

  6. Power Generation from Coal 2010

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-07-01

    Coal is the biggest single source of energy for electricity production and its share is growing. The efficiency of converting coal into electricity matters: more efficient power plants use less fuel and emit less climate-damaging carbon dioxide. This book explores how efficiency is measured and reported at coal-fired power plants. With many different methods used to express efficiency performance, it is often difficult to compare plants, even before accounting for any fixed constraints such as coal quality and cooling-water temperature. Practical guidelines are presented that allow the efficiency and emissions of any plant to be reported on a common basis and compared against best practice. A global database of plant performance is proposed that would allow under-performing plants to be identified for improvement. Armed with this information, policy makers would be in a better position to monitor and, if necessary, regulate how coal is used for power generation. The tools and techniques described will be of value to anyone with an interest in the more sustainable use of coal.

  7. Appalachian clean coal technology consortium

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, R.-H.; Basim, B.; Luttrell, G.H.; Phillips, D.I. [Virginia Polytechnic Inst., Blacksburg, VA (United States); Jiang, D.; Tao, D.; Parekh, B.K. [Kentucky Univ., Lexington, KY (United States); Meloy, T. [West Virginia Univ., Morgantown, WV (United States)

    1997-01-28

    Novel chemicals that can be used for increasing the efficiency of fine coal dewatering was developed at Virginia Tech. During the past quarter, Reagent A was tested on three different coal samples in laboratory vacuum filtration tests. these included flotation products from Middle Fork plant, Elkview Mining Company, and CONSOL, Inc. the tests conducted with the Middle Fork coal sample (100 mesh x 0) showed that cake moisture can be reduced by more than 10% beyond what can be achieved without using dewatering aid. This improvement was achieved at 1 lb/ton of Reagent A and 0.1 inch cake thickness. At 0. 5 inches of cake thickness, this improvement was limited to 8% at the same reagent dosage. the results obtained with the Elkview coal (28 mesh x 0) showed similar advantages in using the novel dewatering aid. Depending on the reagent dosage, cake thickness, drying cycle time and temperature, it was possible to reduce the cake moisture to 12 to 14% rage. In addition to achieving lower cake moisture, the use of Reagent A substantially decreased the cake formation time, indicating that the reagent improves the kinetics of dewatering, The test results obtained with CONSOL coal were not as good as with the other coals tested in the present work, which may be attributed to possible oxidation and/or contamination.

  8. Estimation of Coal Bed Methane Potential of Coal Seams of Margherita Coal Field, Assam, India

    Directory of Open Access Journals (Sweden)

    Prasenjit Talukdar

    2015-06-01

    Full Text Available The rapid industrialization and growing energy needs have put a great stress on the conventional energy resources. This is even more concerning for a country like India which is a net importer of oil. To meet the ever increasing need for energy, it is essential that the search for unconventional energy is intensified. This paper deals with the estimation of coal bed methane potential of the Margherita Coal Field of Assam, India. For this purpose, eight coal samples were collected from Tirap O.C.P., Ledo UG Incline and Tikak O.C.P collieries of the Margherita coal field. Proximate analysis, megascopic study and finally qualitative analysis of these eight samples was undertaken. After analysis, the inferred reserves of CBM at Margherita Coalfield, was found to be in the range of 42.5-49.04 Billion Cubic Meter.

  9. Enhancement of surface properties for coal beneficiation

    Energy Technology Data Exchange (ETDEWEB)

    Chander, S.; Aplan, F.F.

    1992-01-30

    This report will focus on means of pyrite removal from coal using surface-based coal cleaning technologies. The major subjects being addressed in this study are the natural and modulated surface properties of coal and pyrite and how they may best be utilized to facilitate their separation using advanced surface-based coal cleaning technology. Emphasis is based on modified flotation and oil agglomerative processes and the basic principles involved. The four areas being addressed are: (1) Collectorless flotation of pyrite; (2) Modulation of pyrite and coal hydrophobicity; (3) Emulsion processes and principles; (4) Evaluation of coal hydrophobicity.

  10. Commercially viable strategies for enhancing coal quality

    Energy Technology Data Exchange (ETDEWEB)

    A. Patwardhan; Y.P. Chugh [Southern Illinois University, Carbondale, IL (United States). Department of Mining and Mineral Resources Engineering

    2005-12-01

    The focus of this research is on coal quality enhancement, which includes reduction in the sulfur content and increase in heating value through simple, innovative, and commercially viable coal cleaning strategies. These strategies involve fine coal cleaning, plant optimization, partial coarse coal liberation, and multiple product generation. Evaluations on five mines in Illinois have indicated a potential to reduce the sulfur dioxide emission potential of these coals by up to 20%, while increasing the product heating value by up to 250 kcal/kg (450 BTU/lb). In addition, increases in coal yield by 2-6% are predicted depending on the specific conditions at the evaluated mine.

  11. Relationship Between Coal Powder and Its Combustibility

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Coal's volatile component,ash and fixed carbon content have different functions in different stages of a combustion process, but the traditional coal classification can precisely show its combustion property.In this experiment coal's evaluation indexes (ignition index Di),(burn off index Df) were used to qualitatively show the ignition property and combustion ending property of coal samples.Meanwhile,considering actual heating circumstances in calciner (in cement plants),this thesis established the relationship among the ignition index,burn off index and coal's industrial analysis value, which makes it possible for the user to predict the quality of coal before using it and is very valuable in practice.

  12. ENVIRONMENT TREATMENT AND RECOVERY FOR SURFACE MINING OF ZAOZHUANG CITY, SHANDONG PROVINCE%浅谈山东省枣庄市某露天开采石灰岩矿山地质环境治理与恢复

    Institute of Scientific and Technical Information of China (English)

    尹秀贞; 陈刚; 潘爱宏; 亓协全

    2013-01-01

      针对枣庄市某水泥用灰岩矿开采导致了土地挖损和压占、地形地貌景观破坏和崩塌地质灾害隐患等地质环境问题,提出了:生产过程中发现的危岩,及时予以清理,或对其进行加固;采矿结束后,开采平台外缘用浆砌毛石砌筑挡土坝,平台上部30cm覆土,下部20cm用强风化页岩做铺垫,种植侧柏,平台的内侧,按照2m 的间距种植爬山虎、葛藤等攀缘类植被,绿化边坡面;露天采坑治理成人工湖等治理办法。经过恢复治理,不仅能适时地保护和恢复自然生态环境,也能有效消除矿业活动带来的地质灾害隐患;另可恢复林地及人工湖面积33.48hm2(502.2亩),具有显著的社会效益。%  Surface Mining of limestone leading to land loss and occupation,landforms destruction and collapse and other geological hazards.Limestone mine in Zaozhuang City as an Example,to explore the mine geological environment treatment and recovery:First,Clear or reinforcement the dangerous rock found in the production process,in a timely;Second,After mining,platform with mortar rubble masonry Bulkhead Dam platform upper 30cm casing, the lower 20cm strongly weathered shale pave the way for planting oriental arborvitae at the outer edge of the mining,in accordance with the the 2m spacing planting ivykudzu climbing classes such as vegetation to green slope surface at the inside of the platform; Third,convert open pit to artificial lake.After recovery and management,not only to protect and restore the natural ecological environment in a timely,but also can effectively eliminate the geological disaster brought by mining activities, Other can recover woodland and lake area 33.48hm2 (502.2 acres),with significant social benefits.

  13. Coal fields and outlines of coal-bearing strata in the Colorado Plateau coal assessment study area (cpcf*g)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — These are shapefiles and ARC/INFO coverages of coal fields and coal-bearing formations in the Colorado Plateau. These GIS layers were created by combining numerous...

  14. Drivers for the renaissance of coal.

    Science.gov (United States)

    Steckel, Jan Christoph; Edenhofer, Ottmar; Jakob, Michael

    2015-07-21

    Coal was central to the industrial revolution, but in the 20th century it increasingly was superseded by oil and gas. However, in recent years coal again has become the predominant source of global carbon emissions. We show that this trend of rapidly increasing coal-based emissions is not restricted to a few individual countries such as China. Rather, we are witnessing a global renaissance of coal majorly driven by poor, fast-growing countries that increasingly rely on coal to satisfy their growing energy demand. The low price of coal relative to gas and oil has played an important role in accelerating coal consumption since the end of the 1990s. In this article, we show that in the increasingly integrated global coal market the availability of a domestic coal resource does not have a statistically significant impact on the use of coal and related emissions. These findings have important implications for climate change mitigation: If future economic growth of poor countries is fueled mainly by coal, ambitious mitigation targets very likely will become infeasible. Building new coal power plant capacities will lead to lock-in effects for the next few decades. If that lock-in is to be avoided, international climate policy must find ways to offer viable alternatives to coal for developing countries.

  15. Short description of the Peruvian coal basins

    Energy Technology Data Exchange (ETDEWEB)

    Carrascal-Miranda, Eitel R. [UNI, Lima (Peru); Suarez-Ruiz, Isabel [Instituto Nacional del Carbon (CSIC), Ap. Co., 73, 33080 Oviedo (Spain)

    2004-04-23

    This work synthesizes the main general characteristics of the Peruvian Coal Basins in relation to age, coal facies and coal rank. Peruvian coals are located in a series of coal basins from the Paleozoic to the Cenozoic age. Paleozoic coal seams are mainly of Mississippian age (Carboniferous). They are of continental origin and their reduced thickness and ash content are their main characteristics. Mesozoic coal seams (Upper Jurassic-Lower Cretaceous) are located in the so-called Peruvian Western Basin and in the depressions close to the 'Maranon Geoanticline'. They were originated in deltaic facies under the influence of brackish and fresh waters. Some of these coal basins (those distributed in the central and northern parts of Peru) are relatively well known because they are of economic importance. Finally, Cenozoic coal seams (Tertiary) are found in both paralic and limnic basins and their reserves are limited. All the Peruvian coals are of humic character and are vitrinite-rich. Their rank is highly variable and normally related with the different orogenic events which strongly affected this region. Thus, Paleozoic and Mesozoic coals are of bituminous to anthracite/meta-anthracite coal rank while peats, lignite and subbituminous coals are found in Cenozoic basins.

  16. Gold, coal and oil.

    Science.gov (United States)

    Dani, Sergio U

    2010-03-01

    Jared Diamond has hypothesized that guns, germs and steel account for the fate of human societies. Here I propose an extension of Diamond's hypothesis and put it in other terms and dimensions: gold, coal and oil account not only for the fate of human societies but also for the fate of mankind through the bodily accumulation of anthropogenic arsenic, an invisible weapon of mass extinction and evolutionary change. The background is clear; arsenic species fulfill seven criteria for a weapon of mass extinction and evolutionary change: (i) bioavailability to all living organisms; (ii) imperceptibility; (iii) acute toxicity; (iv) bioaccumulation and chronic toxicity; (v) adverse impact on reproductive fitness and reproductive outcomes and early-age development and growth in a wide range of microbial, plant and animal species including man; (vi) widespread geographical distribution, mobility and ecological persistence on a centennial to millennial basis and (vii) availability in necessary and sufficient amounts to exert evolutionarily meaningful effects. The proof is becoming increasingly feasible as human exploitation of gold, coal and oil deposits cause sustainable rises of arsenic concentrations in the biosphere. Paradoxically, humans are among the least arsenic-resistant organisms because humans are long-lived, encephalized and complex social metazoans. An arsenic accumulation model is presented here to describe how arsenic accumulates in the human body with increasing age and at different provisionally safe exposure levels. Arsenic accumulates in the human body even at daily exposure levels which are within the lowest possible WHO provisional tolerance limits, yielding bodily arsenic concentrations which are above WHO provisional limits. Ongoing consequences of global scale arsenic poisoning of mankind include age-specific rises in morbidity and mortality followed by adaptive changes. The potential rise of successful forms of inborn resistance to arsenic in humans

  17. Recent trend in coal utilization technology. Coal utilization workshop

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Chon Ho; Son, Ja Ek; Lee, In Chul; Jin, Kyung Tae; Kim, Seong Soo [Korea Inst. of Energy Research, Taejon (Korea, Republic of)

    1995-12-01

    The 11th Korea-U.S.A. joint workshop on coal utilization technology was held in somerset, Pennsylvania, U.S.A. from october 2 to 3, 1995. In the opening ceremony, Dr.C. Low-el Miller, associate deputy assistant secretary of office of clean coal technology, U.S.DOE, gave congratulatory remarks and Dr. Young Mok Son, president of KIER, made a keynote address. In this workshop, 30 papers were presented in the fields of emission control technology, advanced power generation systems, and advanced coal cleaning and liquid fuels. Especially, from the Korean side, not only KIER but also other private research institutes and major engineering companies including KEPCO, Daewoo Institute of Construction Technology, Jindo Engineering and Construction Co. Daewoo Institute for Advanced Engineering and universities participated in this workshop, reflecting their great interests. Attendants actively discussed about various coal utilization technologies and exchanged scientific and technical information on the state-of-art clean coal technologies under development. (author)

  18. Electrokinetic dewatering of ultrafine coal and coal tailings

    Energy Technology Data Exchange (ETDEWEB)

    Andy Fourie [University of Western Australia, WA (Australia). CSIRO

    2008-03-15

    There are a number of established technologies for reducing the water content of coal slurries before impounding the slurry. This report deals with the process of electrokinetic dewatering, whereby water is extracted from a slurry through the application of direct current voltage using two or more electrodes. Water flows towards the negatively charged electrode, the cathode, where it can be collected. This project sought to verify that the findings of work carried out about two decades ago on coal tailings was valid when conductive polymer electrodes (commonly known as EKGs - ElectroKinetic Geosynthetics) are used. Verify the applicability of electrokinetic dewatering to a range of ultrafine coal products and coal tailings; and characterise the dewatering efficiency and effectiveness and consequent potential economic benefits for different electrokinetic treatment regimes for both in-situ and in-process dewatering methods using EKGs. The current project has again proved the technical viability of dewatering ultrafine coal tailings electrokinetically. Before the technology can be adopted at full scale, however, it would be important to conduct field trials.

  19. Nitrogen release during coal combustion

    Energy Technology Data Exchange (ETDEWEB)

    Baxter, L.L.; Mitchell, R.E.; Fletcher, T.H.; Hurt, R.H.

    1995-02-01

    Experiments in entrained flow reactors at combustion temperatures are performed to resolve the rank dependence of nitrogen release on an elemental basis for a suite of 15 U.S. coals ranging from lignite to low-volatile bituminous. Data were obtained as a function of particle conversion, with overall mass loss up to 99% on a dry, ash-free basis. Nitrogen release rates are presented relative to both carbon loss and overall mass loss. During devolatilization, fractional nitrogen release from low-rank coals is much slower than fractional mass release and noticeably slower than fractional carbon release. As coal rank increases, fractional nitrogen release rate relative to that of carbon and mass increases, with fractional nitrogen release rates exceeding fractional mass and fractional carbon release rates during devolatilization for high-rank (low-volatile bituminous) coals. At the onset of combustion, nitrogen release rates increase significantly. For all coals investigated, cumulative fractional nitrogen loss rates relative to those of mass and carbon passes through a maximum during the earliest stages of oxidation. The mechanism for generating this maximum is postulated to involve nascent thermal rupture of nitrogen-containing compounds and possible preferential oxidation of nitrogen sites. During later stages of oxidation, the cumulative fractional loss of nitrogen approaches that of carbon for all coals. Changes in the relative release rates of nitrogen compared to those of both overall mass and carbon during all stages of combustion are attributed to a combination of the chemical structure of coals, temperature histories during combustion, and char chemistry.

  20. 75 FR 18015 - Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production...

    Science.gov (United States)

    2010-04-08

    ... Internal Revenue Service Credit for Renewable Electricity Production, Refined Coal Production, and Indian Coal Production, and Publication of Inflation Adjustment Factors and Reference Prices for Calendar Year... availability of the credit for renewable electricity production, refined coal production, and Indian coal...

  1. Plasma coal reprocessing

    Science.gov (United States)

    Messerle, V. E.; Ustimenko, A. B.

    2013-12-01

    Results of many years of investigations of plasma-chemical technologies for pyrolysis, hydrogenation, thermochemical preparation for combustion, gasification, and complex reprocessing of solid fuels and hydrocarbon gas cracking are represented. Application of these technologies for obtaining the desired products (hydrogen, industrial carbon, synthesis gas, valuable components of the mineral mass of coal) corresponds to modern ecological and economical requirements to the power engineering, metallurgy, and chemical industry. Plasma fuel utilization technologies are characterized by the short-term residence of reagents within a reactor and the high degree of the conversion of source substances into the desired products without catalyst application. The thermochemical preparation of the fuel to combustion is realized in a plasma-fuel system presenting a reaction chamber with a plasmatron; and the remaining plasma fuel utilization technologies, in a combined plasma-chemical reactor with a nominal power of 100 kW, whose zone of the heat release from an electric arc is joined with the chemical reaction zone.

  2. A coal dust burner

    Energy Technology Data Exchange (ETDEWEB)

    Vakhrshev, B.M.; Khasnullin, I.G.; Krauze, Ye.G.; Ushakov, Yu.A.; Zinovyev, V.G.

    1982-01-01

    The burner for combustion of coal dust fuel, primarily, in rotating furnaces, contains coaxially disposed pipes, a branch pipe for feeding in the air mixture and a rotating mechanism. The first two pipes are switched in to an air source. The third pipe on the input end has an oblique section and the pipe may be rotated around an axis by a mechanism. The first pipe has ports and it may be moved in an axial direction. By installing the third pipe in the first and second positions, it is possible to direct the dust coming from the branch pipe along the central (the larger part of the dust) or the central pipe, respectively, which makes it possible to regulate the configuration of the torch and its temperature. Hot air is sucked from the furnace through the ports in the perforated first pipe to the mouth of the burner, which makes it possible to intensify combustion. By moving the fifitpipe to the right it is possible to overlap the ports with the projections and to rule out suction of the air. The possibility of regulating combustion in wide ranges makes it possible to reduce the expenditure of fuel by 2 to 3 percent.

  3. Coal Mines, Abandoned - Digitized Mined Areas

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — Coal mining has occurred in Pennsylvania for over a century. The maps to these coal mines are stored at many various public and private locations (if they still...

  4. Coal Fields - COAL_NCRDS_IN: Coal Resource Data in Indiana, Derived from the National Coal Resource Data System (Indiana Geological Survey, Point Shapefile)

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This ESRI ArcInfo point shapefile depicts the location of 9,117 public point-source coal resource data points in Indiana. This shapefile includes location and coal...

  5. GOVERNMENT TO REGULATE COAL-PETROCHEMICALS INDUSTRY

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ The Chinese Government will soon issue an industry policy to regulate the coal-chemicals sector, after a circular in August ordered local authorities to tighten their grip on the approval of new coal-to-petrochemicals projects in China.

  6. Keynote address: Coal competitiveness and energy alternatives

    Energy Technology Data Exchange (ETDEWEB)

    Broadbent, G. [IEA Coal Research, Clean Coal Centre, London (United Kingdom)

    2001-02-01

    The competitiveness of coal versus gas, nuclear and renewables for power generation is discussed. It is concluded that coal is competitive on existing plant but it needs to accelerate technology development faster than the competition to sustain its future.

  7. Coal Mines, Active - Longwall Mining Panels

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — Coal mining has occurred in Pennsylvania for over a century. A method of coal mining known as Longwall Mining has become more prevalent in recent decades. Longwall...

  8. Third symposium on coal preparation. NCA/BCR coal conference and Expo IV

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-01-01

    The third Symposium on Coal preparation, sponsored by the National Coal Association and Bituminous Coal Research, Inc., was held at the Kentucky Fair and Exposition Center, Louisville, Kentucky, October 18-20, 1977. Fourteen papers from the proceedings have been entered individually into EDB and ERA; five additional papers had been entered previously from other sources. Topics covered involved chemical comminution and chemical desulfurization of coal (aimed at reducing sulfur sufficiently with some coals to meet air quality standards without flue gas desulfurization), coal cleaning concepts, removing coal fines and recycling wash water, comparative evaluation of coal preparation methods, coal refuse disposal without polluting the environment, spoil bank reprocessing, noise control in coal preparation plants, etc. (LTN)

  9. Numerical approach to the top coal caving process under different coal seam thicknesses

    Directory of Open Access Journals (Sweden)

    Yu Bin

    2015-01-01

    Full Text Available Numerical study of mining-induced stress evolution of coal during the top coal caving process under different coal seam thicknesses is carried out, and the numerical prediction agrees well with the field test data. Main characters on stress distribution and dangerous area are elucidated. For the same coal quality, coal layers under 7 m thick fail earlier than thicker coal layers; correspondingly, the internal fracture networks of thin layers are more easily developed. During the mining of a coal layer less than 7 m thick, stress monitoring of the “dangerous area” in the middle of the top coal should be emphasized, whereas during the mining of coal layers less than 11 m thick, stress monitoring of the “dangerous area” at the bottom of the top coal should be highlighted. The research is to optimize caving technique and extraction process.

  10. Characteristics of Telemagmatic Metamorphism of the Ceshui Formation Coal in Lianyuan Coal Basin

    Institute of Scientific and Technical Information of China (English)

    毕华; 彭格林

    1998-01-01

    The Ceshui Formation coal is mostly anthracite and its metamorphism has been less documented.By analyzing systematically the reflectance of vitrinite and the results of X-ray diffraction of the Ceshui Formation cola in the Lianyuan coal basin,the spatial variation characteristics of coal ranks,coal metamorphic regions,the extension of coal metamorphic belts.coal metamorphic gradients,coal chemical structure and the effect on the degree of metamorphism of heat-production and -storge conditions,buried depth of the Indosinian-Yenshanian granites at the margins of the Lianyuan coal basin are discussed.The research results in conjunction of the features of regional hydrothermal alterations,endogenetic deposits with the Ceshui Formation coal measures,and the development of secondary vesicles indicate that the telemagmatic metamorphism is the main factor leading to the metamorphism of the Ceshui Formation coal in the region studied.

  11. Carbon dioxide from coal combustion: Variation with rank of US coal

    Science.gov (United States)

    Quick, J.C.; Glick, D.C.

    2000-01-01

    Carbon dioxide from combustion of US coal systematically varies with ASTM rank indices, allowing the amount of CO2 produced per net unit of energy to be predicted for individual coals. No single predictive equation is applicable to all coals. Accordingly, we provide one equation for coals above high volatile bituminous rank and another for lower rank coals. When applied to public data for commercial coals from western US mines these equations show a 15% variation of kg CO2 (net GJ)-1. This range of variation suggests reduction of US CO2 emissions is possible by prudent selection of coal for combustion. Maceral and mineral content are shown to slightly affect CO2 emissions from US coal. We also suggest that CO2 emissions increased between 6 and 8% in instances where Midwestern US power plants stopped burning local, high-sulfur bituminous coal and started burning low-sulfur, subbituminous C rank coal from the western US.

  12. Clean Coal Program Research Activities

    Energy Technology Data Exchange (ETDEWEB)

    Larry Baxter; Eric Eddings; Thomas Fletcher; Kerry Kelly; JoAnn Lighty; Ronald Pugmire; Adel Sarofim; Geoffrey Silcox; Phillip Smith; Jeremy Thornock; Jost Wendt; Kevin Whitty

    2009-03-31

    Although remarkable progress has been made in developing technologies for the clean and efficient utilization of coal, the biggest challenge in the utilization of coal is still the protection of the environment. Specifically, electric utilities face increasingly stringent restriction on the emissions of NO{sub x} and SO{sub x}, new mercury emission standards, and mounting pressure for the mitigation of CO{sub 2} emissions, an environmental challenge that is greater than any they have previously faced. The Utah Clean Coal Program addressed issues related to innovations for existing power plants including retrofit technologies for carbon capture and sequestration (CCS) or green field plants with CCS. The Program focused on the following areas: simulation, mercury control, oxycoal combustion, gasification, sequestration, chemical looping combustion, materials investigations and student research experiences. The goal of this program was to begin to integrate the experimental and simulation activities and to partner with NETL researchers to integrate the Program's results with those at NETL, using simulation as the vehicle for integration and innovation. The investigators also committed to training students in coal utilization technology tuned to the environmental constraints that we face in the future; to this end the Program supported approximately 12 graduate students toward the completion of their graduate degree in addition to numerous undergraduate students. With the increased importance of coal for energy independence, training of graduate and undergraduate students in the development of new technologies is critical.

  13. Cokemaking from coals of Kuzbas and Donbas

    Energy Technology Data Exchange (ETDEWEB)

    Umansky, R.Z. [Resourcecomplect, Donetsk (Ukraine); Kovalev, E.T.; Drozdnik, I.D. [UKHIN, Kharkov (Ukraine)

    1997-12-31

    The paper discusses features of Donetsk and Kuznetsk coals, the export capability of Ukraine coking industry, the selection of coal blends involving coals from different basins, and practical recommendations and techno-economic considerations. It is concluded that by raising the share of low-sulfur Kuznetsk coal in the blend to 50%, coke produced will meet all the requirements of European and American consumers.

  14. On microbial desulfurization of Indian coals

    Energy Technology Data Exchange (ETDEWEB)

    Saroj, K.K.; Gupta, A.; Thakur, D.N. [Central Mining Research Institute, Dhanbad (India)

    1996-12-31

    A process was developed to desulfurise the pyritic coal of Assam coal mines utilising a mixed flora of Thiobacillus ferroxidans and Thiobacillus thiooxidans. Different media were studied and the effect of addition of sodium chloride was observed. A model sulfur compound for coal - dibenzothiophene (DBT) has been subjected to sulfur removal. Sulfolobus acidocaldarius has been utilized for the removal of organic sulfur from coal. 3 refs., 3 tabs.

  15. Germanium content in Polish hard coals

    Directory of Open Access Journals (Sweden)

    Makowska Dorota

    2016-01-01

    Full Text Available Due to the policy of the European Union, it is necessary to search for new sources of scarce raw materials. One of these materials is germanium, listed as a critical element. This semi-metal is widely used in the electronics industry, for example in the production of semiconductors, fibre optics and solar cells. Coal and fly ash from its combustion and gasification for a long time have been considered as a potential source of many critical elements, particularly germanium. The paper presents the results of germanium content determination in the Polish hard coal. 23 coal samples of various coal ranks were analysed. The samples were collected from 15 mines of the Upper Silesian Coal Basin and from one mine of the Lublin Coal Basin. The determination of germanium content was performed with the use of Atomic Absorption Spectrometry with Electrothermal Atomization (GFAAS. The investigation showed that germanium content in the analysed samples was at least twice lower than the average content of this element in the hard coals analysed so far and was in the range of 0.08 ÷ 1.28 mg/kg. Moreover, the content of Ge in the ashes from the studied coals does not exceed 15 mg/kg, which is lower than the average value of Ge content in the coal ashes. The highest content of this element characterizes coals of the Lublin Coal Basin and young coals type 31 from the Vistula region. The results indicate a low utility of the analysed coal ashes as a source of the recovery of germanium. On the basis of the analyses, the lack of the relationship between the content of the element and the ash content in the tested coals was noted. For coals of the Upper Silesian Coal Basin, the relationship between the content of germanium in the ashes and the depth of the seam was observed.

  16. Study of mechanically activated coal combustion

    Energy Technology Data Exchange (ETDEWEB)

    Anatolij P. Burdukov; Vitalij A. Popov; Valentin A. Faleev [Institute of Thermophysics, Novosibirsk (Russian Federation)

    2009-07-01

    Combustion and air gasification of mechanically activated micro-ground coals in the flux have been studied. Influence of mechanically activated methods of coal grinding on their chemical activity at combustion and gasification has been determined. Intense mechanical activation of coals increases their chemical activity that enables development of new highly boosted processing methods for coals with various levels of metamorphism. 10 refs., 14 figs., 1 tab.

  17. Ningxia Becomes China's Largest Coal Chemical Base

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ Northwest China's Ningxia Hui Autonomous Region plans to invest more than 100 billion yuan (US$12.9 billion) to build Asia's largest liquefied-coal base,according to the regional development and reform commission. The first group of projects, designed to produce methanol and other chemicals from coal, are under construction in the Ningdong Chemical Resource Base, which is located near coal deposits containing 80 percent of Ningxia's known coal reserves, said Hao Linhai, director of the regional commission.

  18. Coal-based carbon foams. Influence of the precursor coal

    Energy Technology Data Exchange (ETDEWEB)

    Montserrat Calvo; Roberto Garcia; Sabino R. Moinelo [Instituto Nacional del Carbon (CSIC), Oviedo (Spain)

    2007-07-01

    Carbon foams were obtained from several bituminous coals with different plasticity and volatile matter content by a two-stage thermal process. The first stage, a controlled carbonisation treatment under pressure at 450-500{sup o}C, is responsible for the final textural properties of the foam. In the second stage the carbonisation product was baked at 1100{sup o}C. The foams produced display a macroporous texture with plasticity, volatile matter content and maceral composition of the precursor coals having an influence on the apparent density and the pore size of the resultant porous products. 7 refs., 4 figs., 3 tabs.

  19. Coking coals of Mongolia: Distribution and resources

    Science.gov (United States)

    Erdenetsogt, Bat-Orshikh; Jargal, Luvsanchultem

    2016-04-01

    The coal deposits of Mongolia tend to become younger from west to east and can be subdivided into two provinces, twelve basins, and three areas. Main controlling factor of coal rank is the age of coal bearing sequences. Western Mongolian coal-bearing province contains mostly high rank bituminous coal in strata from Late Carboniferous. The basins in southern Mongolia and the western part of central Mongolia have low rank bituminous coal in strata from the Permian. The northern and central Mongolian basins contain mainly Jurassic subbituminous coal, whereas the Eastern Mongolian province has Lower Cretaceous lignite. Mongolian known coking coal reserves are located in western, southern and northern Mongolia and related to Carboniferous, Permian and Jurassic sequences, respectively. Pennsylvanian Nuurstkhotgor coal deposit is located in northwestern Mongolia (in Western Mongolian coal-bearing province). The coals have 1-7.5 crucible swelling number (CSN) and 0-86 G-index. Vitrinite reflectance value (Rmax in oil) varies from 0.7% to 1.2% and sulfur content is low, ranging from 0.3% to 0.6% with an average of 0.4%. Coal reserve is estimated to be 1.0 billion ton, of which half is coking coal. Upper Permian Khurengol deposit is situated in western Mongolia (in Western Mongolian coal-bearing province). CSN and G-index of coal are 8-9 and 54-99, respectively. The coals have Rmax of 1.1 to 1.7% (average 1.4%) and sulfur content of 0.2 to 0.6% (average 0.4%). Coking coal reserve of the deposit is estimated to be 340 million ton. Upper Permian Tavantolgoi, the largest coking coal deposit, lies in southern Mongolia (in South Gobi coal-bearing basin). The coals have CSN of 1 to 7.5 and Rmax of 0.7% to 1.2%. Sulfur content is low, ranging from 0.5% to 0.9%. Coal reserve is estimated to be 6.0 billion ton, of which 2.0 billion ton is accounted as coking coal. Lower-Middle Jurassic Ovoot coal is located in northern Mongolia (in Orkhon-Selenge coal-bearing area). This is one of

  20. Development of coal store and transportation technology using horizontal coal bunker

    Institute of Scientific and Technical Information of China (English)

    TIAN Jian-sheng; CHEN Qing-shu

    2005-01-01

    Discussed the necessity of setting up the coal bunker in mining, introduced the development of coal bunker technology, combining the mining characteristic of the high yield and high-efficient working face in China at present, and point out that the type of horizontal coal bunker, is a kind of security, high-efficient coal store and transportation technology of suiting the modern production need of the colliery, is the developing direction of technology of store and transportation of coal bunker.

  1. Shungite carbon catalytic effect on coal treatment

    Energy Technology Data Exchange (ETDEWEB)

    Grigorieva, E.N.; Rozhkova, N.N. [Russian Academy of Sciences, Moscow (Russian Federation). Institute for High Temperature

    1999-07-01

    The catalytic ability of shungite carbon in reactions of coal organic matter models appeared to be due to its fullerene structure only. Transition metal sulphides present in shungite carbon are not active in the conditions of coal treatment. Shungite carbon was shown to exhibit an acceleration of thermolysis of coal and organic matter models, mainly dehydrogenation. 5 refs., 1 tabs.

  2. 78 FR 7424 - National Coal Council

    Science.gov (United States)

    2013-02-01

    ... Clean Coal Electricity 5. Jim Butz, Vice President of Product Management, Novinda Corp.: ``Mercury... National Coal Council AGENCY: Department of Energy. ACTION: Notice of open meeting. SUMMARY: This notice announces a meeting of the National Coal Council (NCC). The Federal Advisory Committee Act (Pub. L....

  3. Coal can be a Clean Fuel

    Science.gov (United States)

    Environmental Science and Technology, 1975

    1975-01-01

    Redevelopment and expansion of United States coal resources are economic necessities. Environmentalists' objections to the less expensive, available United States coal, that introduces large amounts of SOx and particulates into the air, may be overcome with the options of coal cleaning, tall stacks, material recovery and stack cleaning. (BT)

  4. Cleaning up the future of coal

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ CAS is making efforts to seek green solutions to address the pollution problem of the traditional forms of coal utilization. For instance, as SONG Jianlan reports, a research team from the Taiyuan-based CAS Institute of Coal Chemistry has developed clean, efficient ways to convert coal into liquefied fuels.

  5. Selective solvent absorption in coal conversion

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, J.W.; Lapucha, A.; Lazarov, L.; Amui, J.

    1992-04-01

    The objectives of this project are: (1) to determine the importance of the presence of added hydrogen donor compounds within the coal in the first stage of direct liquefaction processes; and (2) to determine the composition of the solvent absorbed by and present within the coal in the first stage of direct coal liquefaction.

  6. Ukrainian experience of oil agglomeration of coals

    Energy Technology Data Exchange (ETDEWEB)

    Biletskyi, V.S. [Donetsk State Technical University, Donetsk (Ukraine). Dept. of Coal Preparation

    1997-12-31

    During the years 1980-1996 a series of investigations related to the applied and theoretical aspects of the coal oil agglomeration processing were carried out in the Ukraine at the Donetsk State Technical University and Coal Chemistry National Academy of Sciences (NAN) of Ukraine, institutes UralVTI, VNIIPIHidrotruboprovod, LenNIlkhimmash, Kharkiv polytechnical Institute, Institute of Biocolloide Chemistry NAN of Ukraine and also at coal preparation plants and thermoelectric power stations in the Donbas. Theoretical bases of the process of selective oil agglomeration are developed on the basis of modern physical chemistry, physical-chemical hydrodynamics, adhesion theory, and solid fuel chemistry. The necessary sufficient conditions for aggregate forming coal and oil components in water have been formulated. The central problem of `coal-reagent` interaction during coal aggregation has been solved, and a mathematical description of processes for forming coal-oil aggregates including kinetics has been made. Analysis of factors which influence the process and its mathematical models have been realized. Rational conditions of pelletising of energetic and coking coal, coal raw material and products of coal preparation plants, electric power stations, and hydrotransport systems have been determined. Results of the complex study of technological properties of coal aggregates as objects of dewatering, hydrotransportation, consumption, coking, pyrolysis and carriers at gold adhesive preparation are presented. The theoretical principles and experimental data served as a basis for creating about 40 new methods and devices for the process of coal selective oil agglomeration. 14 refs., 7 figs., 1 tab.

  7. Future trends in steam coal utilization

    Energy Technology Data Exchange (ETDEWEB)

    Broadbent, G.A. [IEA Coal Research, London (United Kingdom)

    2000-07-01

    After reviewing the history of coal production in important regions of the world and the evolution of the international steam coal trade, the paper examines the main drivers behind the future use of steam coal and looks at, from past evidence and current perception, how these may shape the future. The four main drivers are social issues, strategic issues, competitiveness issues, and environmental issues.

  8. Corporate changes in the coal sector

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-20

    The article highlights major trends in the corporate structure and performance in the international coal business as recorded in the latest volume of `Coal companies worldwide` published by Sheffield Energy and Resources Information Services (SERIS). The document draws on information from 116 parent companies with coal or lignite mining operations, incorporating 400 subsidiaries, associates and joint ventures.

  9. Response of Argonne Premium coals to heat

    Energy Technology Data Exchange (ETDEWEB)

    Isaacs, L.L.; Abhari, R.; Ledesma, R.; Tsafantakis, E. (City College, New York, NY (USA). Dept. of Chemical Engineering)

    The thermal responses of the Argonne Premium Coals and of the inorganic materials separated from the coals were obtained by differential scanning calorimetry. Thermogravimetry was used to quantify the mass loss induced due to heating. The energetics of several prepyrolytic processes in the coals were calculated. 24 refs., 13 figs., 3 tabs.

  10. Review of a Proposed Quarterly Coal Publication

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    This Review of a Proposed Quartery Coal Publication contains findings and recommendations regarding the content of a new summary Energy Information Administration (EIA) coal and coke publication entitled The Quarterly Coal Review (QCR). It is divided into five sections: results of interviews with selected EIA data users; identification of major functions of the coal and coke industries; analysis of coal and coke data collection activities; evaluation of issues conerning data presentation including recommendations for the content of the proposed QCR; and comparison of the proposed QCR with other EIA publications. Major findings and recommendations are as follows: (1) User interviews indicate a definite need for a compehensive publication that would support analyses and examine economic, supply and demand trends in the coal industry; (2) the organization of the publication should reflect the natural order of activities of the coal and coke industries. Based on an analysis of the industries, these functions are: production, stocks, imports, exports, distribution, and consumption; (3) current EIA coal and coke surveys collect sufficient data to provide a summary of the coal and coke industries on a quarterly basis; (4) coal and coke data should be presented separately. Coke data could be presented as an appendix; (5) three geographic aggregations are recommended in the QCR. These are: US total, coal producing districts, and state; (6) coal consumption data should be consolidated into four major consumer categories: electric utilities, coke plants, other industrial, and residential commercial; (7) several EIA publications could be eliminated by the proposed QCR.

  11. Connect the Spheres with the Coal Cycle

    Science.gov (United States)

    Clary, Renee; Wandersee, James

    2010-01-01

    Coal fueled the Industrial Revolution and, as a result, changed the course of human history. However, the geologic history of coal is much, much longer than that which is recorded by humans. In your classroom, the coal cycle can be used to trace the formation of this important economic resource from its plant origins, through its lithification, or…

  12. 48 CFR 908.7110 - Coal.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Coal. 908.7110 Section 908... REQUIRED SOURCES OF SUPPLIES AND SERVICES Acquisition of Special Items 908.7110 Coal. DOE offices and authorized contractors may participate in the Defense Fuel Supply Center (DFSC) coal contracting program...

  13. Development of coal energy utilization technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    Coal liquefaction produces new and clean energy by performing hydrogenation, decomposition and liquefaction on coal under high temperatures and pressures. NEDO has been developing bituminous coal liquefaction technologies by using a 150-t/d pilot plant. It has also developed quality improving and utilization technologies for liquefied coal, whose practical use is expected. For developing coal gasification technologies, construction is in progress for a 200-t/d pilot plant for spouted bed gasification power generation. NEDO intends to develop coal gasification composite cycle power generation with high efficiency and of environment harmonious type. This paper summarizes the results obtained during fiscal 1994. It also dwells on technologies to manufacture hydrogen from coal. It further describes development of technologies to manufacture methane and substituting natural gas (SNG) by hydrogenating and gasifying coal. The ARCH process can select three operation modes depending on which of SNG yield, thermal efficiency or BTX yield is targeted. With respect to promotion of coal utilization technologies, description is given on surveys on development of next generation technologies for coal utilization, and clean coal technology promotion projects. International coal utilization and application projects are also described. 9 figs., 3 tabs.

  14. Pelletization of fine coals. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Sastry, K.V.S.

    1995-12-31

    Coal is one of the most abundant energy resources in the US with nearly 800 million tons of it being mined annually. Process and environmental demands for low-ash, low-sulfur coals and economic constraints for high productivity are leading the coal industry to use such modern mining methods as longwall mining and such newer coal processing techniques as froth flotation, oil agglomeration, chemical cleaning and synthetic fuel production. All these processes are faced with one common problem area--fine coals. Dealing effectively with these fine coals during handling, storage, transportation, and/or processing continues to be a challenge facing the industry. Agglomeration by the unit operation of pelletization consists of tumbling moist fines in drums or discs. Past experimental work and limited commercial practice have shown that pelletization can alleviate the problems associated with fine coals. However, it was recognized that there exists a serious need for delineating the fundamental principles of fine coal pelletization. Accordingly, a research program has been carried involving four specific topics: (i) experimental investigation of coal pelletization kinetics, (ii) understanding the surface principles of coal pelletization, (iii) modeling of coal pelletization processes, and (iv) simulation of fine coal pelletization circuits. This report summarizes the major findings and provides relevant details of the research effort.

  15. TOXIC SUBSTANCES FROM COAL COMBUSTION

    Energy Technology Data Exchange (ETDEWEB)

    A KOLKER; AF SAROFIM; CL SENIOR; FE HUGGINS; GP HUFFMAN; I OLMEZ; J LIGHTY; JOL WENDT; JOSEPH J HELBLE; MR AMES; N YAP; R FINKELMAN; T PANAGIOTOU; W SEAMES

    1998-12-08

    The Clean Air Act Amendments of 1990 identify a number of hazardous air pollutants (HAPs) as candidates for regulation. Should regulations be imposed on HAP emissions from coal-fired power plants, a sound understanding of the fundamental principles controlling the formation and partitioning of toxic species during coal combustion will be needed. With support from the Federal Energy Technology Center (FETC), the Electric Power Research Institute, the Lignite Research Council, and VTT (Finland), Physical Sciences Inc. (PSI) has teamed with researchers from USGS, MIT, the University of Arizona (UA), the University of Kentucky (UK), the University of Connecticut (UC), the University of Utah (UU) and the University of North Dakota Energy and Environmental Research Center (EERC) to develop a broadly applicable emissions model useful to regulators and utility planners. The new Toxics Partitioning Engineering Model (ToPEM) will be applicable to all combustion conditions including new fuels and coal blends, low-NO combustion systems, and new power generation x plants. Development of ToPEM will be based on PSI's existing Engineering Model for Ash Formation (EMAF). This report covers the reporting period from 1 July 1998 through 30 September 1998. During this period distribution of all three Phase II coals was completed. Standard analyses for the whole coal samples were also completed. Mössbauer analysis of all project coals and fractions received to date has been completed in order to obtain details of the iron mineralogy. The analyses of arsenic XAFS data for two of the project coals and for some high arsenic coals have been completed. Duplicate splits of the Ohio 5,6,7 and North Dakota lignite samples were taken through all four steps of the selective leaching procedure. Leaching analysis of the Wyodak coal has recently commenced. Preparation of polished coal/epoxy pellets for probe/SEM studies is underway. Some exploratory mercury LIII XAFS work was

  16. Fibre Optics In Coal Mining

    Science.gov (United States)

    Cooper, Paul

    1984-08-01

    Coal mines have a number of unique problems which affect the use of fibre optic technology. These include a potentially explosive atmosphere due to the evolution of methane from coal, and a dirty environment with no cleaning facilities readily available. Equipment being developed by MRDE to allow the exploitation of optical fibres underground includes: A hybrid electrical/fibre optic connector for the flexible power trailing cable of the coal-face shearer; An Intrinsically Safe (IS) pulsed laser transmitter using Frequency Shift Key (FSK) data modulation; An IS Avalanche Photo Diode Receiver suitable for pulsed & continuous wave optical signals; A mine shaft and roadway cable/ connector system incorporating low loss butt-splices and preterminated demountable connectors.

  17. Microwave plasma combustion of coal

    Energy Technology Data Exchange (ETDEWEB)

    P.M. Kanilo; V.I. Kazantsev; N.I. Rasyuk; K. Schuenemann; D.M. Vavriv [Institute of Machine Building Problems of the National Academy of Sciences of Ukraine, Kharkov (Ukraine)

    2003-01-01

    Microwave plasma is studied as an alternative to oil or gas fuel for ignition and stabilisation of burning of lean coal. The study is performed on an experimental set-up, which includes a burner with a microwave plasma generator, coal and air supply systems, and measurement equipment. Power and thermochemical characteristics of the coal-plasma interaction have been measured and analysed. The obtained results indicate an essential intensification of ignition and combustion processes in the microwave burner compared to those in conventional burners. In particular, it has been demonstrated that the microwave energy consumption is only about 10% of the required expenditure of oil or gas, measured in heat equivalent. A design of an industrial microwave-plasma burner is proposed. Prospects of such burner for applications at industrial boilers of power plants are discussed. 6 refs., 4 figs., 2 tabs.

  18. Study of application of ERTS-A imagery to fracture-related mine safety hazards in the coal mining industry

    Science.gov (United States)

    Wier, C. E.; Wobber, F. J.; Russell, O. R.; Martin, K. R. (Principal Investigator)

    1973-01-01

    The author has identified the following significant results. Mined land reclamation analysis procedures developed within the Indiana portion of the Illinois Coal Basin were independently tested in Ohio utilizing 1:80,000 scale enlargements of ERTS-1 image 1029-15361-7 (dated August 21, 1972). An area in Belmont County was selected for analysis due to the extensive surface mining and the different degrees of reclamation occurring in this area. Contour mining in this area provided the opportunity to extend techniques developed for analysis of relatively flat mining areas in Indiana to areas of rolling topography in Ohio. The analysts had no previous experience in the area. Field investigations largely confirmed office analysis results although in a few areas estimates of vegetation percentages were found to be too high. In one area this error approximated 25%. These results suggest that systematic ERTS-1 analysis in combination with selective field sampling can provide reliable vegetation percentage estimates in excess of 25% accuracy with minimum equipment investment and training. The utility of ERTS-1 for practical and reasonably reliable update of mined lands information for groups with budget limitations is suggested. Many states can benefit from low cost updates using ERTS-1 imagery from public sources.

  19. Nesting success of grassland and savanna birds on reclaimed surface coal mines of the midwestern United States

    Energy Technology Data Exchange (ETDEWEB)

    Galligan, E.W.; DeVault, T.L.; Lima, S.L. [Indiana State University, Terre Haute, IN (United States)

    2006-12-15

    Reclaimed surface coal mines in southwestern Indiana support many grassland and shrub/savanna bird species of conservation concern. We examined the nesting success of birds on these reclaimed mines to assess whether such 'unnatural' places represent productive breeding habitats for such species. We established eight study sites on two large, grassland-dominated mines in southwestern Indiana and classified them into three categories (open grassland, shrub/savanna, and a mixture of grassland and shrub/savanna) based on broad vegetation and landscape characteristics. During the 1999 and 2000 breeding seasons, we found and monitored 911 nests of 31 species. Daily nest survival for the most commonly monitored grassland species ranged from 0.903 (Dickcissel, Spiza americana) to 0.961 (Grasshopper Sparrow, Ammodramus savannarum). Daily survival estimates for the dominant shrub/savanna nesting species ranged from 0.932 (Brown Thrasher, Toxostoma rufum) to 0.982 (Willow Flycatcher, Empidonax traillii). Vegetation and landscape effects on nesting success were minimal, and only Eastern Meadowlarks (Sturnella magna) showed a clear time-of-season effect, with greater nesting success in the first half of the breeding season. Rates of Brown-headed Cowbird (Molothrus ater) parasitism were only 2.1% for grassland species and 12.0% for shrub/savanna species. The nesting success of birds on reclaimed mine sites was comparable to that in other habitats, indicating that reclaimed habitats on surface mines do not necessarily represent reproductive traps for birds.

  20. Coal liquefaction with preasphaltene recycle

    Science.gov (United States)

    Weimer, Robert F.; Miller, Robert N.

    1986-01-01

    A coal liquefaction system is disclosed with a novel preasphaltene recycle from a supercritical extraction unit to the slurry mix tank wherein the recycle stream contains at least 90% preasphaltenes (benzene insoluble, pyridine soluble organics) with other residual materials such as unconverted coal and ash. This subject process results in the production of asphaltene materials which can be subjected to hydrotreating to acquire a substitute for No. 6 fuel oil. The preasphaltene-predominant recycle reduces the hydrogen consumption for a process where asphaltene material is being sought.

  1. Flow in Coal Seams: An Unconventional Challenge

    Science.gov (United States)

    Armstrong, R. T.; Mostaghimi, P.; Jing, Y.; Gerami, A.

    2016-12-01

    A significant unconventional resource for energy is the methane gas stored in shallow coal beds, known as coal seam gas. An integrated imaging and modelling framework is developed for analysing petrophysical behaviour of coals. X-ray micro-computed tomography (micro-CT) is applied using a novel contrast agent method for visualising micrometer-sized fractures in coal. The technique allows for the visualisation of coal features not visible with conventional imaging methods. A Late Permian medium volatile bituminous coal from Moura Coal Mine (Queensland, Australia) is imaged and the resulting three-dimensional coal fracture system is extracted for fluid flow simulations. The results demonstrate a direct relationship between coal lithotype and permeability. Scanning electron microscope and energy dispersive spectrometry (SEM-EDS) together with X-ray diffraction (XRD) methods are used for identifying mineral matters at high resolution. SEM high-resolution images are also used to calibrate the micro-CT images and measure the exact aperture size of fractures. This leads to a more accurate estimation of permeability using micro-CT images. To study the significance of geometry and topology of the fracture system, a fracture reconstruction method based on statistical properties of coal is also developed. The network properties including the frequency, aperture size distribution, length, and spacing of the imaged coal fracture system. This allows for a sensitivity analysis on the effects that coal fracture topology and geometry has on coal petrophysical properties. Furthermore, we generate microfluidic chips based on coal fracture observations. The chip is used for flow experiments to visualise multi-fluid processes and measure recovery of gas. A combined numerical and experimental approach is applied to obtain relative permeability curves for different regions of interest. A number of challenges associated with coal samples are discussed and insights are provided for better

  2. Characterization of the mechanisms for coal solubilization by filamentous fungi

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez, M.; Luna, N.; Monistrol, I.F.; Laborda, F. [Madrid Univ. (Spain). Dept. de Microbiologia y Parasitologia

    1997-12-31

    The mechanisms implicated on coal solubilization have been studied in this work. Two fungal strains (Trichoderma and Penicillium) has been isolated which were able to solubilize different kinds of Spanish coals (hard coal, subbituminous coal and lignite) when growing in liquid media in the presence of coal. Extracellular peroxidase, esterase and some times phenol oxidase enzymes were present in the culture supernatant when a high degree of coal solubilization was attained. Those enzymes could be involved in the coal attack. (orig.)

  3. Stabilization of pulverized coal combustion by plasma assist

    Energy Technology Data Exchange (ETDEWEB)

    Sugimoto, M.; Maruta, K.; Takeda, K.; Solonenko, O.P.; Sakashita, M.; Nakamura, M. [Akita Prefectural University, Akita (Japan). Faculty of System Science & Technology

    2002-03-01

    Ignition and stabilization of pulverized coal combustion by plasma assist is investigated with a 10 kW plasma torch for three different kinds of coal, such as high, medium and low volatile matter coals. Not only high volatile matter coal but also low quality coal can be successfully burned with plasma assist. Research for volatile component of coal shows that a higher temperature field is necessary to extract the volatile matter from inferior coal, while their compositions are almost the same.

  4. Underground coal gasification technology impact on coal reserves in Colombia

    Directory of Open Access Journals (Sweden)

    John William Rosso Murillo

    2013-12-01

    Full Text Available In situ coal gasification technology (Underground Coal Gasification–UCG– is an alternative to the traditional exploitation, due to it allows to reach the today’s inaccessible coal reserves’ recovery, to conventional mining technologies. In this article I answer the question on how the today’s reserves available volume, can be increased, given the possibility to exploit further and better the same resources. Mining is an important wealth resource in Colombia as a contributor to the national GDP. According with the Energy Ministry (Ministerio de Minas y Energía [1] mining has been around 5% of total GDP in the last years. This is a significant fact due to the existence of a considerable volume of reserves not accounted for (proved reserves at year 2010 were 6.700 million of tons. Source: INGEOMINAS and UPME, and the coal future role’s prospect, in the world energy production.

  5. Clean coal technology: gasification of South African coals - IFSA 2008

    CSIR Research Space (South Africa)

    Engelbrecht, AD

    2008-11-01

    Full Text Available Electricity demand in South Africa is increasing at a rate of 1000 MW per year. Whilst there is increasing pressure to adopt non-fossil fuel electricity generating technologies, the abundant reserves and low cost of coal make it the preferred energy...

  6. Effectiveness factors for hydroprocessing of coal and coal liquids

    Energy Technology Data Exchange (ETDEWEB)

    Massoth, F.E.; Seader, J.D.

    1990-06-28

    The aim of this project is to develop a methodology to predict, from a knowledge of feed and catalyst properties, effectiveness factors for catalytic hydroprocessing of coal and coal liquids. The research entails a study of hydrodenitrogenation of model compounds and coal-derived liquids using three NiMo/alumina catalysts of different pore size to develop, for restrictive diffusion. During this quarter equilibrium adsorption studies of single and binary solutes in cyclohexane solvent on three NiMo catalysts were completed. Three single solutes, 9-phenylanthracene, 9-phenylcarbazole, and 9-phenylacridine; and two binary-solute mixtures (9-PhAn/9-PhC and 9-PhC/9-PhAn) were used for the studies. Mathematical models for sorptive diffusion on single- and binary-solute systems were developed. The previously hydrotreated coal-derived-liquid was subjected to a secondary hydrotreatment to achieve a satisfactory product quality. The oil was thoroughly analyzed. Hydrogenation of two nickel-porphines were carried out in this oil and the kinetics was studied with two catalysts under the process conditions. Reaction rates and restrictive diffusion effects were compared to those obtained in the pure solvents from the previous studies. 6 refs., 6 figs., 4 tabs.

  7. Quarterly coal report, October--December 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    The Quarterly Coal Report (QCR) provides comprehensive information about US coal production, distribution, exports, imports, receipts, prices, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. Coke production, consumption, distribution, imports, and exports data are also provided. This report presents detailed quarterly data for October through December 1996 and aggregated quarterly historical data for 1990 through the third quarter of 1996. Appendix A displays, from 1988 on, detailed quarterly historical coal imports data. To provide a complete picture of coal supply and demand in the US, historical information has been integrated in this report. 8 figs., 72 tabs.

  8. Process for selective grinding of coal

    Science.gov (United States)

    Venkatachari, Mukund K.; Benz, August D.; Huettenhain, Horst

    1991-01-01

    A process for preparing coal for use as a fuel. Forming a coal-water slurry having solid coal particles with a particle size not exceeding about 80 microns, transferring the coal-water slurry to a solid bowl centrifuge, and operating same to classify the ground coal-water slurry to provide a centrate containing solid particles with a particle size distribution of from about 5 microns to about 20 microns and a centrifuge cake of solids having a particle size distribution of from about 10 microns to about 80 microns. The classifer cake is reground and mixed with fresh feed to the solid bowl centrifuge for additional classification.

  9. Reinventing an industry at Western Canadian Coal

    Energy Technology Data Exchange (ETDEWEB)

    Chen, C.

    2006-09-15

    Western Canadian Coal is applying lessons learned from past disruptions to coal production operations in British Columbia in order to build a low cost, long term production operation. Northeast British Columbia has huge coal deposits and an established infrastructure that includes the town of Tumbler Ridge, rail facilities, and access to Port Rupert. The company is developing 50,000 hectares of coal-bearing property. Production commenced in 2004, and it is planned to produce four million tonnes of coal per year by the end of 2007, increasing to 10 million tonnes by 2012. Equipment, staffing, and activities at the Dillon, Wolverine, and Brule mines are described. 2 photos.

  10. Portable crushers resolve frozen coal problem

    Energy Technology Data Exchange (ETDEWEB)

    Massa, P.; Fuller, L.; Buckley, T. [Public Services of Indiana (PSI), IN (United States)

    2001-11-01

    In 2002, PSI contracted XMS Equipment to design a pair of modularized and portable crushers to overcome the problem of frozen coal during winter months. The rollers of the crusher can be removed during non-winter months, reducing wear. The article describes the design, construction and installation of the system which takes care of the frozen coal in the hoppers and the coal feed systems in the 1000 W Cayuga plant and overcomes the problem of coal freezing in the reclaim hoppers and the open coal storage areas. 4 figs.

  11. Assessment of Research Needs for Coal Utilization

    Energy Technology Data Exchange (ETDEWEB)

    Penner, S.S.

    1983-08-01

    The Coal Combustion and Applications Working Group (CCAWG), at the request of J.W. Mares (Assistant Secretary for Fossil Energy) and A.W. Trivelpiece (Director, Office of Energy Research), has reviewed and evaluated the U.S. programs on coal combustion and utilization. The important topical areas of coal gasification and coal liquefaction have been deliberately excluded because R and D needs for these technologies were reviewed previously by the DOE Fossil Energy Research Working Group. The CCAWG studies were performed in order to provide an independent assessment of research areas that affect prospects for augmented coal utilization. In this report, we summarize the findings and research recommendations of CCAWG.

  12. Quarterly coal report, January--March 1998

    Energy Technology Data Exchange (ETDEWEB)

    Young, P.

    1998-08-01

    The Quarterly Coal Report (QCR) provides comprehensive information about US coal production, distribution, exports, imports, receipts, prices, consumption, and stocks to a wide audience, including Congress, Federal and State agencies, the coal industry, and the general public. Coke production, consumption, distribution, imports, and exports data are also provided. This report presents detailed quarterly data for January through March 1998 and aggregated quarterly historical data for 1992 through the fourth quarter of 1997. Appendix A displays, from 1992 on, detailed quarterly historical coal imports data. To provide a complete picture of coal supply and demand in the United States, historical information has been integrated in this report. 58 tabs.

  13. Biogasification of low-rank coal

    Energy Technology Data Exchange (ETDEWEB)

    Harding, R.; Czarnecki, S.; Isbister, J.; Barik, S. (ARCTECH, Inc., Chantilly, VA (United States))

    1993-02-01

    ARCTECH is developing a coal biogasification technology, The MicGAS Process'' for producing clean fuel forms such as methane. The overall objective of this research project was to characterize and construct an efficient coal gasifying capable of converting Texas lignite to methane. The technical feasibility for bioconversion of Texas lignite to methane, volatile fatty acids, alcohols, and other soluble organic products has been demonstrated. Several biogasification were evaluated for their ability to degrade low-rank coals to methane, and Mic-1 a mixed culture derived from a wood-eating- Zootermopsis termite species, was identified as the most active and efficient for biogasification of Texas lignite. Parameters such as pH, temperature, redox potential, coal particle size, coal solids loadings, culture age, nutrient amendments, and biomass concentration were studied to determine the optimum conditions required for efficient biogasification of coal. Analytical methods for monitoring the production of methane, degradation intermediates, and biomass were developed. Most significant achievements were: (1) development of analytical methodology to monitor coal biogasification; (2) confirmation of biogasification efficiency of Mic-1 culture; (3) ability of Mic-1 consortium to retain coal-degrading activity when grown in the absence of coal; and (4) significantly higher (ca. 26%) methane production from micronized coal (ca. 10 gm) than from larger coal particle sizes.

  14. Investigation on characterization of Ereen coal deposit

    Directory of Open Access Journals (Sweden)

    S. Jargalmaa

    2016-03-01

    Full Text Available The Ereen coal deposit is located 360 km west from Ulaanbaatar and 95 km from Bulgan town. The coal reserve of this deposit is approximately 345.2 million tons. The Ereen coal is used directly for the Erdenet power plant for producing of electricity and heat. The utilization of this coal for gas and liquid product using gasification and pyrolysis is now being considered. The proximate and ultimate analysis show that the Ereen coal is low rank D mark hard coal, which corresponds to subbituminous coal. The SEM images of initial coal sample have compact solid pieces. The SEM image of carbonized and activated carbon samples are hard material with high developed macro porosity structure. The SEM images of hard residue after thermal dissolution in autoclave characterizes hard pieces with micro porous structure in comparison with activated carbon sample. The results of the thermal dissolution of Ereen coal in tetralin with constant weight ratio between coal and tetralin (1:1.8 at the 450ºC show that 38% of liquid product can be obtained by thermal decomposition of the COM (coal organic matter.Mongolian Journal of Chemistry 16 (42, 2015, 18-21

  15. Characterization and supply of coal based fuels

    Energy Technology Data Exchange (ETDEWEB)

    1992-06-01

    Studies and data applicable for fuel markets and coal resource assessments were reviewed and evaluated to provide both guidelines and specifications for premium quality coal-based fuels. The fuels supplied under this contract were provided for testing of advanced combustors being developed under Pittsburgh Energy Technology Center (PETC) sponsorship for use in the residential, commercial and light industrial (RCLI) market sectors. The requirements of the combustor development contractors were surveyed and periodically updated to satisfy the evolving needs based on design and test experience. Available coals were screened and candidate coals were selected for further detailed characterization and preparation for delivery. A team of participants was assembled to provide fuels in both coal-water fuel (CWF) and dry ultrafine coal (DUC) forms. Information about major US coal fields was correlated with market needs analysis. Coal fields with major reserves of low sulfur coal that could be potentially amenable to premium coal-based fuels specifications were identified. The fuels requirements were focused in terms of market, equipment and resource constraints. With this basis, the coals selected for developmental testing satisfy the most stringent fuel requirements and utilize available current deep-cleaning capabilities.

  16. The control of coal mine gas and coordinated exploitation of coal bed methane in China

    Institute of Scientific and Technical Information of China (English)

    LIU Jian-zhong

    2009-01-01

    Based on the characteristics of the coalfield geology and the distribution of coal bed methane (CBM) in China, the geological conditions for exploiting the CBM and drain-ing the coal mine gas were analyzed, as well as the characteristics of CBM production. By comparing the current situation of CBM exploitation in China with that in the United States, the current technology and characteristics of the CBM exploitation in China were summa-rized and the major technical problems of coal mine gas control and CBM exploitation analyzed. It was emphasized that the CBM exploitation in China should adopt the coal mine gas drainage method coordinated with coal mine exploitation as the main model. It was proposed that coal mine gas control should be coordinated with coal mine gas ex-ploitation. The technical countermeasure should be integrating the exploitation of coal and CBM and draining gas before coal mining.

  17. 12th international conference on coal science. Coal - contributing to sustainable world development

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    The theme of the conference was: coal - contributing to sustainable world. Papers dealt with combustion, coal cleaning, surface analysis, coal sustainability and research, metallurgical coke, structural studies, ash utilization, SEM analysis, liquefaction, pulverized coal injection, power plant emissions, analytical techniques, gasification, thermal analysis, weathering, self-heating and dust explosion, low rank coal gasification, geochemistry and trace elements, petrographic studies, CO{sub 2} mitigation, low rank coal pyrolysis, gas sorption, pyrolysis, synthesis gas, low rank coal drying, biomass pyrolysis, gas cleaning, underground gasification, activated carbon, pyrolysis and char reactivity, gasification model studies, agglomerated and slurry fuels, co-pyrolysis, and tar products and effluents. The poster papers are also included. The papers have been abstracted separately on the IEA Clean Coal Centre Coal Abstracts database.

  18. Distribution of Heavy Hydrocarbon in Coal Seams and Its Use in Predicting Outburst of Coal

    Institute of Scientific and Technical Information of China (English)

    蒋承林; 李增华; 韩颖

    2003-01-01

    In order to verify whether any special gas component exists in outburst samples or not, coal samples from both outburst coal seams and non-outburst coal seams were collected. Some gases were extracted from the samples and analyzed qualitatively and quantitatively on chromatogram-mass spectrograph. The qualitative analysis show that there is no special gases in coal seams. And the quantitative analysis indicates that the heavy hydrocarbon content in coal samples from outburst coal seams is apparently higher than that from non-outburst district ones, which reflects the damage of geological tectonic movement to coal body in history. Therefore, the heavy hydrocarbon content of coal sample can be used as an index to predict coal outburst.

  19. Coal Mines, Abandoned - COAL_MINE_UNDERGROUND_IN: Underground Coal Mines in Indiana (Indiana Geological Survey, 1:24,000, Polygon Shapefile)

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — COAL_UND, the predecessor of COAL_MINE_UNDERGROUND_IN, is a polygon-based ESRI ArcView shapefile that shows the location and extent of underground coal mines in the...

  20. Coal Mines, Abandoned - COAL_MINE_ENTRIES_IN: Underground Coal Mine Entrances in Indiana (Indiana Geological Survey, 1:24,000, Point Shapefile)

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — SW_COAL_ENTRY, the predecessor of COAL_MINE_ENTRIES_IN, is a point- based ESRI ArcView shapefile that shows the locations of underground coal mine entrances in the...

  1. Study on combustion characteristics of blended coals

    Institute of Scientific and Technical Information of China (English)

    LI Yonghua; WANG Chunbo; CHEN Hongwei

    2007-01-01

    Power plants in China have to burn blended coal instead of one specific coal for a variety of reasons.So it is of great necessity to investigate the combustion of blended coals.Using a test rig with a capacity of 640 MJ/h with an absolute milling system and flue gas online analysis system,characteristics such as burnout,slag,and pollution of some blended coals were investigated.The ratio of coke and slag as a method of distinguishing coal slagging characteristic was introduced.The results show that the blending of coal has some effect on NOx but there is no obvious rule.SOx emission can be reduced by blending low sulfur coal.

  2. Transformation of coals at the heat treatment

    Energy Technology Data Exchange (ETDEWEB)

    S.A. Aipshtein; V.I. Minaev; O.V. Barabanova; V.A. Novikova [Moscow State University of Mining (MSMU), Moscow (Russian Federation)

    2007-07-01

    The coals (from Kuznetsk and Donetsk basins) were selected with the following criteria: a) different rank; b) different genetic types. The substantial and chemical compositions of the coals were determined. Experimental works on coal heat treatment were carried out at temperatures 423K, 473K, 523K, 573K and different times of processing in the conditions excluding oxidation of coals. It was shown, that the prevailing contribution of destruction or cross-linking in the general process of coal transformation at the heat treatment depends on temperature and time of thermal treatment. It was shown that the depth and direction of coals transformations at the heat treatment essentially depended on the genetic type of coals. 7 refs., 3 figs., 1 tab.

  3. Cytotoxicity and genotoxicity induced by coal and coal fly ash particles samples in V79 cells.

    Science.gov (United States)

    León-Mejía, Grethel; Silva, Luis F O; Civeira, Matheus S; Oliveira, Marcos L S; Machado, Miriana; Villela, Izabel Vianna; Hartmann, Andreas; Premoli, Suziane; Corrêa, Dione Silva; Da Silva, Juliana; Henriques, João Antônio Pêgas

    2016-12-01

    Exposure to coal and coal ashes can cause harmful effects in in vitro and in vivo systems, mainly by the induction of oxidative damage. The aim of this work was to assess cytotoxic and genotoxic effects using the V79 cell line treated with coal and coal fly ash particles derived from a coal power plant located in Santa Catarina, Brazil. Two coal samples (COAL11 and COAL16) and two coal fly ash samples (CFA11 and CFA16) were included in this study. COAL16 was co-firing with a mixture of fuel oil and diesel oil. The comet assay data showed that exposure of V79 cells to coal and coal fly ash particles induced primary DNA lesions. Application of lesion-specific endonucleases (FPG and ENDO III) demonstrated increased DNA effects indicating the presence of high amounts of oxidative DNA lesions. The cytokinesis-block micronucleus cytome assay analysis showed that exposure of V79 cells to high concentrations of coal and coal fly ash particles induced cytotoxic effects (apoptosis and necrosis) and chromosomal instability (nucleoplasmic bridges, nuclear buds, and micronucleus (MN) formation). These results may be associated with compounds contained in the surface of the particles as hazardous elements, ultrafine/nanoparticles, and polycyclic aromatic hydrocarbons (PAHs) which were detected in the samples. Graphical abstract ᅟ.

  4. Coal quality and coal utilization in the twenty-first century

    Energy Technology Data Exchange (ETDEWEB)

    Finkelman, R.B. [US Geological Survey, Reston, VA (USA)

    2000-07-01

    Knowledge of coal quality, the physical, chemical, and mineralogical characteristics and properties of coal will become increasingly important as we enter the 21st century. To maximize the efficiency of coal use and to minimize its environmental and human health impacts we will need to generate information on a broad array of coal quality parameters and to improve our ability to generate comprehensive, precise, and accurate coal quality data. To this end there is an international effort to quantify the modes of occurrence of the important elements in coal such as arsenic, mercury, selenium, sodium, nickel, and chromium. Quantitative information on the modes of occurrence of elements in coal is essential for the development of models to predict element behaviour during in-ground leaching, weathering, coal cleaning, and combustion. Anticipating the behaviour of the elements is necessary for evaluating the environmental and human health impacts, technological impacts, and economic by-product potential of coal use. Although millions of coal analyses have been performed worldwide, existing national coal quality databases are generally of limited use because much of the data are not readily accessible; geographic coverages are not comprehensive; analytical data may not be accurate; and samples may not be representative, or current. To address this problem a new international coal quality database is being developed to provide accurate, comprehensive, and reliable coal quality data to the host country and to the world coal community. Reliable coal quality data made available to the world coal community can be used to assess the opportunities for the transfer of appropriate technology and may be of value with various domestic and international policy decisions such as evaluating coal export/import opportunities and in assessing environmental impacts of coal use. 4 refs.

  5. Petrographic compositions of Paleozoic coals of Mongolia

    Science.gov (United States)

    Jargal, Luvsanchultem; Erdenetsogt, Bat-Orshikh

    2016-04-01

    In Mongolia, the deposition of coal bearing strata commenced in Pennsylvanian, and continued in Upper Permian, in Lower-Middle Jurassic and finally in Lower Cretaceous time. Pennsylvanian coal seams were deposited in Western Mongolia, where peat formation was initially developed in the southernmost part and later gradually shifted to northward. By the Late Permian, the locus of coal formation had changed and main peat accumulation took place in southern Mongolia. Lower-Middle Jurassic coal was accumulated in western, northern and eastern Mongolia. During this time, peat forming condition was comparatively stable in entire Mongolia. In the Early Cretaceous, thick and extensive coal was formed in the Eastern Mongolia. Due to this general trend of peat accumulation, coal rank decreases from west (bituminous) to east (lignite). The significant portion of Pennsylvanian and Upper Permian coal reserves, existed in western and southern Mongolia, are coking coal. Thus, petrographical studies of the coals are notably important. However, previous studies of Paleozoic coals have been sparse, and only few deposits have been conducted. The maceral compositions of Western Mongolian Pennsylvanian coals such as Khushuut, Maanit, Khurengol, Zeegt, Tsagaangol, Nuurstkhotgor, Khartarvagatai and Olonbulag were studied. The results show that the coals are dominated by vitrinite (45 vol.% to 71 vol.%) and inertinite (28 vol.% to 53vol.%) macerals. Liptinite contents are low, less than 4 vol.%. In addition, vitrinite reflectance values (Rmax in oil) of Khushuut (1.85%), Maanit (0.92%), Khurengol (1.4%), Zeegt (0.86%), Tsagaangol (3.6%), Nuurstkhotgor (0.9%), Khartarvagatai (1.1%) and Olonbulag (1.7%) were determined. Upper Permian coals in southern Mongolia (Tavantolgoi, Nariinsukhait, Jargalant, Tsagaantolgoi, Buduuniikhyar) are dominated by vitrinite (55 vol.% to 78 vol.%) and inertinite macerals (19 vol.% to 44 vol.%). Liptinite contents range from 1 vol.% to 7 vol.%. The vitrinite

  6. Factors Influencing the Performance of Coal Briquettes

    Directory of Open Access Journals (Sweden)

    Unsia HABIB

    2014-01-01

    Full Text Available The continuous supply of energy resources is essential for the development of any nation. The economic and social life of any nation depends enormously on the energy resources. Over the past few years the energy crisis is becoming a major issue in developing countries as Pakistan. Oil, Natural gas and hydro are the three major energy resources of the Pakistan. These conventional energy resources were being exploited in the past leading to an issue of energy crisis in the country. Replacing expensive imported energy resources with coal briquettes made from indigenous coal reserves can provide fuel for the local residential and commercial markets. Coal briquettes formation is a process to convert coal powder into a specific shape with the help of a binder. An external force is applied to the coal binder mixture to make a firm body of desired shape. The briquettes formed this way will not disintegrate under normal conditions of transportation and use. Coal briquettes are preferred over raw coal because they are a smokeless, strong and low emissive fuel that can be used in numerous domestic and commercial applications. The performance of coal briquettes formed is dependent largely upon its thermal properties and the mechanical strength. Nowadays an environmentally safe briquettes formation process is also included in the performance criteria of coal briquettes. The mechanical strength of coal briquettes affects its storage and transportation to the intended market. The studies on coal briquettes show that coal briquettes quality depends on many factors like the type of binder, quantity of binder, grade of coal, moisture level, coal particle size and its distribution etc. These factors along with some of the factors as time of compaction, compaction temperature, and compaction pressure and moisture level are discussed in this paper to evaluate the performance of briquetting technology in future.

  7. Configurational diffusion of coal macromolecules

    Energy Technology Data Exchange (ETDEWEB)

    Guin, J.A.; Curtis, C.W.; Tarrer, A.R.; Kim, S.; Hwang, D.; Chen, C.C.; Chiou, Z.

    1991-01-01

    The objective of our research was to obtain fundamental information regarding the functional dependence of the diffusion coefficient of coal molecules on the ratio of molecule to pore diameter. That is, the objective of our study was to examine the effect of molecule size and configuration on hindered diffusion of coal macromolecules through as porous medium. To best accomplish this task, we circumvented the complexities of an actual porous catalyst by using a well defined porous matrix with uniform capillaric pores, i.e., a track-etched membrane. In this way, useful information was obtained regarding the relationship of molecular size and configuration on the diffusion rate of coal derived macromolecules through a pore structure with known geometry. Similar studies were performed using a pellet formed of porous alumina, to provide a link between the idealized membranes and the actual complex pore structure of real catalyst extrudates. The fundamental information from our study will be useful toward the tailoring of catalysts to minimize diffusional influences and thereby increase coal conversion and selectivity for desirable products. (VC)

  8. A remote coal deposit revisited

    DEFF Research Database (Denmark)

    Bojesen-Kofoed, Jørgen A.; Kalkreuth, Wolfgang; Petersen, Henrik I.

    2012-01-01

    In 1908, members of the “Danmark Expedition” discovered a coal deposit in a very remote area in western Germania Land, close to the margin of the inland ice in northeast Greenland. The deposit was, however, neither sampled nor described, and was revisited in 2009 for the first time since its disc...

  9. Coal conversion. 1979 technical report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-09-01

    Individual reports are made on research programs which are being conducted by various organizations and institutions for the commercial development of processes for converting coal into products that substitute for these derived from oil and natural gas. Gasification, liquefaction, and demonstration processes and plants are covered. (DLC)

  10. Coal facies studies in Greece

    Energy Technology Data Exchange (ETDEWEB)

    Christanis, Kimon [Department of Geology, University of Patras, GR-265.00 Rio-Patras (Greece)

    2004-04-23

    In Greece, coal-forming conditions prevailed mainly during Neogene and Quaternary times in several intermontane and paralic basins and resulted in the formation of significant peat and lignite deposits. The economically recoverable lignite reserves are 3.9 Gt and the annual production, mainly for power generation, exceeds 65 Mt.

  11. Coal-fired diesel generator

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    The objective of the proposed project is to test the technical, environmental, and economic viability of a coal-fired diesel generator for producing electric power in small power generating markets. Coal for the diesel generator would be provided from existing supplies transported for use in the University`s power plant. A cleanup system would be installed for limiting gaseous and particulate emissions. Electricity and steam produced by the diesel generator would be used to supply the needs of the University. The proposed diesel generator and supporting facilities would occupy approximately 2 acres of land adjacent to existing coal- and oil-fired power plant and research laboratory buildings at the University of Alaska, Fairbanks. The environmental analysis identified that the most notable changes to result from the proposed project would occur in the following areas: power plant configuration at the University of Alaska, Fairbanks; air emissions, water use and discharge, and the quantity of solid waste for disposal; noise levels at the power plant site; and transportation of coal to the power plant. No substantive adverse impacts or environmental concerns were identified in analyzing the effects of these changes.

  12. Cooperative research in coal liquefaction

    Energy Technology Data Exchange (ETDEWEB)

    Huffman, G.P.; Sendlein, L.V.A. (eds.)

    1991-05-28

    Significant progress was made in the May 1990--May 1991 contract period in three primary coal liquefaction research areas: catalysis, structure-reactivity studies, and novel liquefaction processes. A brief summary of the accomplishments in the past year in each of these areas is given.

  13. Health impacts of domestic coal combustion

    Energy Technology Data Exchange (ETDEWEB)

    Finkelman, R.B.

    1999-07-01

    The US Environmental Protection Agency (EPA) has concluded that, with the possible exception of mercury, there is no compelling evidence to indicate that emissions from coal-burning electric utility generators cause human health problems. The absence of detectable health problems is in part due to the fact that the coals burned in the US generally contain low to modest concentrations of potentially toxic trace elements and that many coal-burning utilities employ sophisticated pollution control systems that efficiently reduce the emissions of hazardous elements. This is not so in many developing countries, especially in homes where coal is used for heating and cooking. Domestic use of coal can present serious human health problems because the coals are generally mined locally with little regard to their composition and the coals are commonly burned in poorly vented or unvented stoves directly exposing residents to the emissions. In China alone several hundred million people commonly burn raw coal in unvented stoves that permeate their homes with high levels of toxic metals and organic compounds. At least 3,000 people in Guizhou Province in southwest China are suffering from severe arsenic poisoning. The primary source of the arsenic appears to be consumption of chili peppers dried over fires fueled with high-arsenic coal. Coal's in the region contain up to 35,000 ppm arsenic. Chili peppers dried over these high-arsenic coal fires absorb 500 ppm arsenic on average. More than 10 million people in Guizhou Province and surrounding areas suffer from dental and skeletal fluorosis. The excess fluorine is due to eating corn dried over burning briquettes made from high-fluorine coals and high-fluoring clay binders. Polycyclic aromatic hydrocarbons formed during coal combustion are believed to cause or contribute to the high incidence of esophageal and lung cancers in parts of China. Domestic coal combustion has also caused selenium poisoning and possibly mercury

  14. Steam pretreatment for coal liquefaction

    Science.gov (United States)

    Ivanenko, Olga

    The objectives of this work are to test the application of steam pretreatment to direct coal liquefaction, to investigate the reaction of model compounds with water, and to explore the use of zeolites in these processes. Previous work demonstrated the effectiveness of steam pretreatment in a subsequent flash pyrolysis. Apparently, subcritical steam ruptures nearly all of the ether cross links, leaving a partially depolymerized structure. It was postulated that very rapid heating of the pretreated coal to liquefaction conditions would be required to preserve the effects of such treatment. Accordingly, a method was adopted in which coal slurry is injected into a hot autoclave containing solvent. Since oxygen is capable of destroying the pretreatment effect, precautions were taken for its rigorous exclusion. Tests were conducted with Illinois No. 6 coal steam treated at 340sp°C, 750 psia for 15 minutes. Both raw and pretreated samples were liquified in deoxygenated tetralin at high severity (400sp°C, 30 min.) and low severity (a: 350sp°C, 30 min., and b: 385sp°C, 15 min.) conditions under 1500 psia hydrogen. Substantial improvement in liquid product quality was obtained and the need for rapid heating and oxygen exclusion demonstrated. Under low severity conditions, the oil yield was more than doubled, going from 12.5 to 29 wt%. Also chemistry of the pretreatment process was studied using aromatic ethers as model compounds. alpha-Benzylnaphthyl ether (alpha-BNE), alpha-naphthylmethyl phenyl (alpha-NMPE), and 9-phenoxyphenanthrene were exposed to steam and inert gas at pretreatment conditions and in some cases to liquid water at 315sp°C. alpha-BNE and alpha-NMPE showed little difference in conversion in inert gas and in steam. Hence, these compounds are poor models for coal in steam pretreatment. Thermally stable 9-phenoxyphenanthrene, however, was completely converted in one hour by liquid water at 315sp°C. At pretreatment conditions mostly rearranged starting

  15. Properties and structure of gas coal and semicoking coal and their lithotypes

    Energy Technology Data Exchange (ETDEWEB)

    Jasienko, S.; Machnikowska, H.; Swietlik, U. [Institute of Chemistry and Technology of Petroleum and Coal, Technical Univ. Wroclaw (Poland)

    1997-12-31

    The properties and structure of coals indicating transitional structure in coalification, gas coal (R{sub 0}-0.86%; C{sup daf} 84.3%) and semicoking coal (R{sub 0} 1.46%; C{sup daf} 90.6%) and their lithotypes - vitrains and fusains were investigated. Structural parameters and properties of coals and lithotypes characterizing their colloidal structure have been presented. Gas coal shows the structure which is transitional between an organosol and an organogel. Semicoking coal shows the transitional structure between an organogel and xerogel. The transitional structure features are most evident in vitrains. Fusains can be classified as untypical xerogels. (orig.)

  16. Reactivity of brazilian coal, charcoal, imported coal and blends aiming to their injection into blast furnaces

    Directory of Open Access Journals (Sweden)

    Janaína Gonçalves Maria da Silva Machado

    2010-09-01

    Full Text Available For about 10 years the steel industry in Brazil has used pulverized coal injection (PCI technology in the blast furnaces based on imported coals. In order to decrease the dependence on imported coals, Brazilian coal, which has limited use due to high ash content, was suggested to be mixed with imported coal and charcoal. The aim was to examine the reactivity of the samples. The charcoal use in the steel industry contributes to the CO2 emission reduction, since it represents a renewable source of energy. The reactivity of the coals, charcoal and mixtures was evaluated through simultaneous thermal analyses. Results of this study are presented and discussed.

  17. Proximate and ultimate analysis of coal and products from coal liquefaction and pyrolysis processes

    Energy Technology Data Exchange (ETDEWEB)

    Murray, C.; Iacchelli, A.; Selucky, M.L.

    1982-01-01

    Procedures are given for analysis of coal, coal liquefaction products, and coal pyrolysis products. Proximate analysis (determination of moisture, ash, volatile matter and fixed carbon) using the Fisher Coal Analyzer Model 490, and ultimate analysis (determination of C, H, N, S, O, and occasionally Cl) using the Perkin-Elmer Elemental Analyzer are described. Determination of calorific value of coal using the oxygen bomb calorimeter is also detailed, as well as procedures for trace element analysis and for removal of halogenated solvents from gravity separation fractions of coal. 4 refs., 1 tab.

  18. Operation experience of Suralaya coal-fired power plant

    Energy Technology Data Exchange (ETDEWEB)

    Saragi, M. [PT Indonesia Power (Indonesia). Suralaya Generation Business Unit

    2004-07-01

    Coal utilization for generating electricity at Suralaya coal-fired power plant has been increased from time to time. It has been driven by the growth of electricity demand from industry as well as consumption from the household sector. Generally, boilers for power plant were designed to burn the locally available coals with a limited specification range. Suralaya coal-fired power plant was built based on coal specifications from Bukit Asam (Sumatera Island), which categorized as sub-bituminous coal rank. Nowadays, supply of coal for Suralaya coal-fired power plant not only comes from Bukit Asam coal mine but also from Kalimantan coal mines. The utilization of coal from the other mines has brought other consequences on operating and equipment of the plant. It needs some effort to deal with the effect from different specifications of coal from the originated design of coal. 4 tabs.

  19. Impact of petroleum industry horizontal divestiture on the coal market

    Energy Technology Data Exchange (ETDEWEB)

    Zimmerman, D.L.; Dymond, L.H.; Marris, R.L.

    1979-06-22

    Volume 2 contains appendices as follows: coal supply curves, coal supply model modifications, coal mine financing data, legislative proposals for horizontal divestiture, overview of oil companies in coal industry (including their coal reserves) and the major sources of data and bibliography. (LTN)

  20. THE RHEOLOGICAL PROPERTIES AND OUTBURST MECHANISM OF GASEOUS COAL

    Institute of Scientific and Technical Information of China (English)

    何学秋; 周世宁; 林柏泉

    1991-01-01

    Coal and methane outburst is one of the harmful disasters in coal mines. We have studied the rheological properties of gaseous coal in laboratory and obtained its rheological fracture principle. This principle can better explain and describe the outburst mechanism of gaseous coal. Thereby a rheological hypothesis of coal and methane outburst is put forward in this paper.