Tritium fractionation in biological systems and in analytical procedures

International Nuclear Information System (INIS)

Kim, M.A.; Baumgaertner, F.

1991-01-01

The organically bound tritium (OBT) is evaluated in biological systems by measuring the tritium distribution ratio (R-value), i.e. tritium concentrations in organic substance to tissue water. The determination of the R-value is found to involve always isotope fractionation in applied analytical procedures and hence the evaluation of the true OBT-value in a given biological system appears more complicated than hitherto known in the literature. The present work concentrates on the tritium isotope fraction in the tissue water separation and on the resulting effects on the R-value. The analytical procedures examined are vacuum freeze drying under equilibrium and non-equilibrium conditions and azeotropic distillation. The vaporization isotope effects are determined separately in the phase transition of solid or liquid to gas in pure water systems as well as in real biological systems, e.g. maize plant. The results are systematically analysed and the influence of isotope effects on the R-value is rigorously quantified. (orig.)

Business Analytics in Practice and in Education: A Competency-Based Perspective

Science.gov (United States)

Mamonov, Stanislav; Misra, Ram; Jain, Rashmi

2015-01-01

Business analytics is a fast-growing area in practice. The rapid growth of business analytics in practice in the recent years is mirrored by a corresponding fast evolution of new educational programs. While more than 130 graduate and undergraduate degree programs in business analytics have been launched in the past 5 years, no commonly accepted…

Application of analytical procedure on system reliability, GO-FLOW

International Nuclear Information System (INIS)

Matsuoka, Takeshi; Fukuto, Junji; Mitomo, Nobuo; Miyazaki, Keiko; Matsukura, Hiroshi; Kobayashi, Michiyuki

2000-01-01

In the Ship Research Institute, research and development of GO-FLOW procedure with various advanced functions as a system reliability analysis method occupying main part of the probabilistic safety assessment (PSA) were promoted. In this study, as an important evaluation technique on executing PSA with lower than level 3, by intending fundamental upgrading of the GO-FLOW procedure, a safety assessment system using the GO-FLOW as well as an analytical function coupling of dynamic behavior analytical function and physical behavior of the system with stochastic phenomenon change were developed. In 1998 fiscal year, preparation and verification of various functions such as dependence addition between the headings, rearrangement in order of time, positioning of same heading to plural positions, calculation of forming frequency with elapsing time were carried out. And, on a simulation analysis function of accident sequence, confirmation on analysis covering all of main accident sequence in the reactor for improved marine reactor, MRX was carried out. In addition, a function near automatically producible on input data for analysis was also prepared. As a result, the conventional analysis not always easy understanding on analytical results except an expert of PSA was solved, and understanding of the accident phenomenon, verification of validity on analysis, feedback to analysis, and feedback to design could be easily carried out. (G.K.)

Reactor Section standard analytical methods. Part 1

Energy Technology Data Exchange (ETDEWEB)

Sowden, D.

1954-07-01

the Standard Analytical Methods manual was prepared for the purpose of consolidating and standardizing all current analytical methods and procedures used in the Reactor Section for routine chemical analyses. All procedures are established in accordance with accepted practice and the general analytical methods specified by the Engineering Department. These procedures are specifically adapted to the requirements of the water treatment process and related operations. The methods included in this manual are organized alphabetically within the following five sections which correspond to the various phases of the analytical control program in which these analyses are to be used: water analyses, essential material analyses, cotton plug analyses boiler water analyses, and miscellaneous control analyses.

75 FR 16345 - Administrative Practices and Procedures; Good Guidance Practices; Technical Amendment

Science.gov (United States)

2010-04-01

.... FDA-1999-N-3539] (formerly Docket No. 1999N-4783) Administrative Practices and Procedures; Good Guidance Practices; Technical Amendment AGENCY: Food and Drug Administration, HHS. ACTION: Final rule... Subjects in 21 CFR Part 10 Administrative practice and procedure, News media. 0 Therefore, under the...

Validation of an advanced analytical procedure applied to the measurement of environmental radioactivity.

Science.gov (United States)

Thanh, Tran Thien; Vuong, Le Quang; Ho, Phan Long; Chuong, Huynh Dinh; Nguyen, Vo Hoang; Tao, Chau Van

2018-04-01

In this work, an advanced analytical procedure was applied to calculate radioactivity in spiked water samples in a close geometry gamma spectroscopy. It included MCNP-CP code in order to calculate the coincidence summing correction factor (CSF). The CSF results were validated by a deterministic method using ETNA code for both p-type HPGe detectors. It showed that a good agreement for both codes. Finally, the validity of the developed procedure was confirmed by a proficiency test to calculate the activities of various radionuclides. The results of the radioactivity measurement with both detectors using the advanced analytical procedure were received the ''Accepted'' statuses following the proficiency test. Copyright © 2018 Elsevier Ltd. All rights reserved.

Chromatographic monitoring procedures in laboratory practice

Energy Technology Data Exchange (ETDEWEB)

Kaplina, E G; Belova, O I; Lasunina, N A

1976-01-01

The Moscow Coke and Chemical Works consist of three plants in combination, viz., the coking plant, the synthetic ammonia plant using coke-oven-gas hydrogen and the oxygen plant. The plant requirements include daily analyses not only of the coke-oven gas but also of a rich gas and an ethylene fraction. The analyses are carried out in VTI-2 apparatus. The analytical data are used to calculate the calorific values and densities of the gases. The time requirements are very considerable and the laboratory has long been engaged in developing and introducing chromatographic procedures for the major constituents of coke-oven gas, rich gas and ethylene fraction. The procedure developed for the coke-oven and rich gases uses two parallel columns, one packed with molecular sieves and the other with grade KSM silica gel. Hydrogen was determined with argon as the carrier gas, and all other constituents with helium. The procedure was time-consuming and complicated. An attempt was made to separate the gases in an LKhM-7a chromatograph with a programme-controlled 50 to 250/sup 0/C heating cycle, but the procedure still had a number of serious defects and could not be recommended for regular quality control. The final variant involved two parallel columns and a procedure based on that in GOST 14920 (''Dry gas. Proximate analysis''). The chromatograph was a type KhL-69 with a 6-way cock in the gas line so that each of the columns could be brought on stream in succession. The analytical column packings were zeolite (in a 2 m column) and diatomaceous brick with 25% n-hexadecane (in a 6 m column).

Analytical Implications of Using Practice Theory in Workplace Information Literacy Research

Science.gov (United States)

Moring, Camilla; Lloyd, Annemaree

2013-01-01

Introduction: This paper considers practice theory and the analytical implications of using this theoretical approach in information literacy research. More precisely the aim of the paper is to discuss the translation of practice theoretical assumptions into strategies that frame the analytical focus and interest when researching workplace…

Tritium isotope fractionation in biological systems and in analytical procedures

International Nuclear Information System (INIS)

Kim, M.A.; Baumgaertner, Franz

1989-01-01

The organically bound tritium (OBT) is evaluated in biological systems by determining the tritium distribution ratio (R-value), i.e. tritium concentrations in organic substance to cell water. The determination of the R-value always involves isotope fractionation is applied analytical procedures and hence the evaluation of the true OBT -value in a given biological system appears more complicated than hitherto known in the literature. The present work concentrates on the tritium isotope fractionation in the cell water separation and on the resulting effects on the R-value. The analytical procedures examined are vacuum freeze drying under equilibrium and non-equilibrium conditions and azeotropic distillation. The vaporization isotope effects are determined separately in the phase transition of solid or liquid to gas in pure tritium water systems as well as in real biological systems, e.g. corn plant. The results are systematically analyzed and the influence of isotope effects on the R-value is rigorously quantified

ASSESSING GOING CONCERN ASSUMPTION BY USING RATING VALUATION MODELS BASED UPON ANALYTICAL PROCEDURES IN CASE OF FINANCIAL INVESTMENT COMPANIES

OpenAIRE

Tatiana Danescu; Ovidiu Spatacean; Paula Nistor; Andrea Cristina Danescu

2010-01-01

Designing and performing analytical procedures aimed to assess the rating of theFinancial Investment Companies are essential activities both in the phase of planning a financialaudit mission and in the phase of issuing conclusions regarding the suitability of using by themanagement and other persons responsible for governance of going concern, as the basis forpreparation and disclosure of financial statements. The paper aims to examine the usefulness ofrecognized models used in the practice o...

Consistency of FMEA used in the validation of analytical procedures

DEFF Research Database (Denmark)

Oldenhof, M.T.; van Leeuwen, J.F.; Nauta, Maarten

2011-01-01

is always carried out under the supervision of an experienced FMEA-facilitator and that the FMEA team has at least two members with competence in the analytical method to be validated. However, the FMEAs of both teams contained valuable information that was not identified by the other team, indicating......In order to explore the consistency of the outcome of a Failure Mode and Effects Analysis (FMEA) in the validation of analytical procedures, an FMEA was carried out by two different teams. The two teams applied two separate FMEAs to a High Performance Liquid Chromatography-Diode Array Detection...

Analytical procedures for determining Pb and Sr isotopic compositions in water samples by ID-TIMS

Directory of Open Access Journals (Sweden)

Veridiana Martins

2008-01-01

Full Text Available Few articles deal with lead and strontium isotopic analysis of water samples. The aim of this study was to define the chemical procedures for Pb and Sr isotopic analyses of groundwater samples from an urban sedimentary aquifer. Thirty lead and fourteen strontium isotopic analyses were performed to test different analytical procedures. Pb and Sr isotopic ratios as well as Sr concentration did not vary using different chemical procedures. However, the Pb concentrations were very dependent on the different procedures. Therefore, the choice of the best analytical procedure was based on the Pb results, which indicated a higher reproducibility from samples that had been filtered and acidified before the evaporation, had their residues totally dissolved, and were purified by ion chromatography using the Biorad® column. Our results showed no changes in Pb ratios with the storage time.

Analytical implications of using practice theory in workplace information literacy research

DEFF Research Database (Denmark)

Moring, Camilla Elisabeth; Lloyd, Annemaree

2013-01-01

Introduction: This paper considers practice theory and the analytical implications of using this theoretical approach in information literacy research. More precisely the aim of the paper is to discuss the translation of practice theoretical assumptions into strategies that frame the analytical...... focus and interest when researching workplace information literacy. Two practice theoretical perspectives are selected, one by Theodore Schatzki and one by Etienne Wenger, and their general commonalities and differences are analysed and discussed. Analysis: The two practice theories and their main ideas...... of what constitute practices, how practices frame social life and the central concepts used to explain this, are presented. Then the application of the theories within workplace information literacy research is briefly explored. Results and Conclusion: The two theoretical perspectives share some...

Aesthetic procedures in office practice.

Science.gov (United States)

Small, Rebecca

2009-12-01

Since the approval of botulinum toxin, dermal fillers, and lasers for cosmetic use, minimally invasive aesthetic procedures have rapidly become the treatments of choice for age-related facial changes. In the past 10 years, aesthetic procedures have increased nearly five-fold. Of the 10.2 million aesthetic treatments performed in 2008, 83 percent were minimally invasive procedures. Botulinum toxin and dermal filler injections, laser hair reduction, chemical peels, laser skin resurfacing, microdermabrasion, and intense pulsed light photorejuvenation were the most commonly performed procedures in 2008. These procedures are effective and associated with minimal discomfort, and they have a low incidence of adverse effects and short recovery times. High patient and physician satisfaction have contributed to their growing popularity and availability in the primary care setting. As patient demand for aesthetic treatments increases, family physicians should be familiar with common minimally invasive aesthetic procedures when advising patients or incorporating aesthetic care into office practice.

Consistency of FMEA used in the validation of analytical procedures.

Science.gov (United States)

Oldenhof, M T; van Leeuwen, J F; Nauta, M J; de Kaste, D; Odekerken-Rombouts, Y M C F; Vredenbregt, M J; Weda, M; Barends, D M

2011-02-20

In order to explore the consistency of the outcome of a Failure Mode and Effects Analysis (FMEA) in the validation of analytical procedures, an FMEA was carried out by two different teams. The two teams applied two separate FMEAs to a High Performance Liquid Chromatography-Diode Array Detection-Mass Spectrometry (HPLC-DAD-MS) analytical procedure used in the quality control of medicines. Each team was free to define their own ranking scales for the probability of severity (S), occurrence (O), and detection (D) of failure modes. We calculated Risk Priority Numbers (RPNs) and we identified the failure modes above the 90th percentile of RPN values as failure modes needing urgent corrective action; failure modes falling between the 75th and 90th percentile of RPN values were identified as failure modes needing necessary corrective action, respectively. Team 1 and Team 2 identified five and six failure modes needing urgent corrective action respectively, with two being commonly identified. Of the failure modes needing necessary corrective actions, about a third were commonly identified by both teams. These results show inconsistency in the outcome of the FMEA. To improve consistency, we recommend that FMEA is always carried out under the supervision of an experienced FMEA-facilitator and that the FMEA team has at least two members with competence in the analytical method to be validated. However, the FMEAs of both teams contained valuable information that was not identified by the other team, indicating that this inconsistency is not always a drawback. Copyright © 2010 Elsevier B.V. All rights reserved.

The Usefulness of Analytical Procedures - An Empirical Approach in the Auditing Sector in Portugal

Directory of Open Access Journals (Sweden)

Carlos Pinho

2014-08-01

Full Text Available The conceptual conflict between the efficiency and efficacy on financial auditing arises from the fact that resources are scarce, both in terms of the time available to carry out the audit and the quality and timeliness of the information available to the external auditor. Audits tend to be more efficient, the lower the combination of inherent risk and control risk is assessed to be, allowing the auditor to carry out less extensive and less timely auditing tests, meaning that in some cases analytical audit procedures are a good tool to support the opinions formed by the auditor. This research, by means of an empirical study of financial auditing in Portugal, aims to evaluate the extent to which analytical procedures are used during a financial audit engagement in Portugal, throughout the different phases involved in auditing. The conclusions point to the fact that, in general terms and regardless of the size of the audit company and the way in which professionals work, Portuguese auditors use analytical procedures more frequently during the planning phase rather than during the phase of evidence gathering and the phase of opinion formation.

Analytical quality assurance procedures developed for the IAEA's Reference Asian Man Project (Phase 2)

International Nuclear Information System (INIS)

Kawamura, H.; Parr, R.M.; Dang, H.S.; Tian, W.; Barnes, R.M.; Iyengar, G.V.

2000-01-01

Analytical quality assurance procedures adopted for use in the IAEA Co-ordinated Research Project on Ingestion and Organ Content of Trace Elements of Importance in Radiological Protection are designed to ensure comparability of the analytical results for Cs, I, Sr, Th, U and other elements in human tissues and diets collected and analysed in nine participating countries. The main analytical techniques are NAA and ICP-MS. For sample preparation, all participants are using identical food blenders which have been centrally supplied after testing for contamination. For quality control of the analyses, six NIST SRMs covering a range of matrices with certified and reference values for the elements of interest have been distributed. A new Japanese reference diet material has also been developed. These quality assurance procedures are summarized here and new data are presented for Cs, I, Sr, Th and U in the NIST SRMs. (author)

Practical web analytics for user experience how analytics can help you understand your users

CERN Document Server

Beasley, Michael

2013-01-01

Practical Web Analytics for User Experience teaches you how to use web analytics to help answer the complicated questions facing UX professionals. Within this book, you'll find a quantitative approach for measuring a website's effectiveness and the methods for posing and answering specific questions about how users navigate a website. The book is organized according to the concerns UX practitioners face. Chapters are devoted to traffic, clickpath, and content use analysis, measuring the effectiveness of design changes, including A/B testing, building user profiles based on search hab

Good analytical practice in the analysis of IAEA materials for certification. Report of a consultants' meeting

International Nuclear Information System (INIS)

1999-01-01

The purpose of this Consultant's Meeting report was to provide basic guidelines to the analysts involved in IAEA certification analysis for IAEA-392 and IAEA-393 Algae Reference Materials and to harmonise the analytical approach. The experience of this exercise will be combined with the requirements of ISO Guide 34 and 35 and should be the basis for a planned guide book on this topic. The Meeting was focused on on the practical implementation of the quality requirements for Reference Material analysis and certification procedures from ISO Guide 34 and ISO Guide 35

Applying Behavior Analytic Procedures to Effectively Teach Literacy Skills in the Classroom

Science.gov (United States)

Joseph, Laurice M.; Alber-Morgan, Sheila; Neef, Nancy

2016-01-01

The purpose of this article is to discuss the application of behavior analytic procedures for advancing and evaluating methods for teaching literacy skills in the classroom. Particularly, applied behavior analysis has contributed substantially to examining the relationship between teacher behavior and student literacy performance. Teacher…

Development of an Analytical Procedure for the Determination of Multiclass Compounds for Forensic Veterinary Toxicology.

Science.gov (United States)

Sell, Bartosz; Sniegocki, Tomasz; Zmudzki, Jan; Posyniak, Andrzej

2018-04-01

Reported here is a new analytical multiclass method based on QuEChERS technique, which has proven to be effective in diagnosing fatal poisoning cases in animals. This method has been developed for the determination of analytes in liver samples comprising rodenticides, carbamate and organophosphorus pesticides, coccidiostats and mycotoxins. The procedure entails addition of acetonitrile and sodium acetate to 2 g of homogenized liver sample. The mixture was shaken intensively and centrifuged for phase separation, which was followed by an organic phase transfer into a tube containing sorbents (PSA and C18) and magnesium sulfate, then it was centrifuged, the supernatant was filtered and analyzed by liquid chromatography tandem mass spectrometry. A validation of the procedure was performed. Repeatability variation coefficients forensic toxicology cases.

Surgical specialty procedures in rural surgery practices: implications for rural surgery training.

Science.gov (United States)

Sticca, Robert P; Mullin, Brady C; Harris, Joel D; Hosford, Clint C

2012-12-01

Specialty procedures constitute one eighth of rural surgery practice. Currently, general surgeons intending to practice in rural hospitals may not get adequate training for specialty procedures, which they will be expected to perform. Better definition of these procedures will help guide rural surgery training. Current Procedural Terminology codes for all surgical procedures for 81% of North Dakota and South Dakota rural surgeons were entered into the Dakota Database for Rural Surgery. Specialty procedures were analyzed and compared with the Surgical Council on Resident Education curriculum to determine whether general surgery training is adequate preparation for rural surgery practice. The Dakota Database for Rural Surgery included 46,052 procedures, of which 5,666 (12.3%) were specialty procedures. Highest volume specialty categories included vascular, obstetrics and gynecology, orthopedics, cardiothoracic, urology, and otolaryngology. Common procedures in cardiothoracic and vascular surgery are taught in general surgical residency, while common procedures in obstetrics and gynecology, orthopedics, urology, and otolaryngology are usually not taught in general surgery training. Optimal training for rural surgery practice should include experience in specialty procedures in obstetrics and gynecology, orthopedics, urology, and otolaryngology. Copyright © 2012 Elsevier Inc. All rights reserved.

Incorporating Minimally Invasive Procedures into an Aesthetic Surgery Practice.

Science.gov (United States)

Matarasso, Alan; Nikfarjam, Jeremy; Abramowitz, Lauren

2016-07-01

Minimally invasive procedures in an aesthetic practice have grown over the past decade. Plastic surgery practices are embracing the incorporation of injectables and lasers as adjuncts to their surgical procedures. The use of botulinum toxin, hyaluronic acid fillers, and lasers has made a significant impact on the authors' practice. The authors describe the important considerations, consultation goals, and procedural steps with injectables and fillers. The novel use of deoxycholic acid injections is also described. The authors strongly think that as options continue to expand, plastic surgeons will benefit from taking an active role in adopting these new innovations. Copyright © 2016 Elsevier Inc. All rights reserved.

Bioethics consultation practices and procedures: a survey of a large Canadian community of practice.

Science.gov (United States)

Greenberg, R A; Anstey, K W; Macri, R; Heesters, A; Bean, S; Zlotnik Shaul, R

2014-06-01

The literature fails to reflect general agreement over the nature of the services and procedures provided by bioethicists, and the training and core competencies this work requires. If bioethicists are to define their activities in a consistent way, it makes sense to look for common ground in shared communities of practice. We report results of a survey of the services and procedures among bioethicists affiliated with the University of Toronto Joint Centre for Bioethics (JCB). This is the largest group of bioethicists working in healthcare organizations in Canada. The results suggest there are many common services and procedures of JCB bioethicists. This survey can serve as a baseline for further exploration of the work of JCB bioethicists. Common practices exist with respect to the domains of practice, individual reporting relationships, service availability within business hours and the education and training of the bioethicist.

The Analytical Pragmatic Structure of Procedural Due Process: A Framework for Inquiry in Administrative Decision Making.

Science.gov (United States)

Fisher, James E.; Sealey, Ronald W.

The study describes the analytical pragmatic structure of concepts and applies this structure to the legal concept of procedural due process. This structure consists of form, purpose, content, and function. The study conclusions indicate that the structure of the concept of procedural due process, or any legal concept, is not the same as the…

Practical aspects and trends in analytical organic mass spectrometry

International Nuclear Information System (INIS)

Schlunegger, U.P.

1981-01-01

Proceeding from the fundamentals of mass spectrometry (MS), some more recent developments of analytical organic MS are shown in comparison with conventional MS. Sections are headed: the vacuum, production of ions in the mass spectrometer, ions in the analyzer of a mass spectrometer, general considerations, practice of modern MS: selected examples

Analysis of plant gums and saccharide materials in paint samples: comparison of GC-MS analytical procedures and databases.

Science.gov (United States)

Lluveras-Tenorio, Anna; Mazurek, Joy; Restivo, Annalaura; Colombini, Maria Perla; Bonaduce, Ilaria

2012-10-10

Saccharide materials have been used for centuries as binding media, to paint, write and illuminate manuscripts and to apply metallic leaf decorations. Although the technical literature often reports on the use of plant gums as binders, actually several other saccharide materials can be encountered in paint samples, not only as major binders, but also as additives. In the literature, there are a variety of analytical procedures that utilize GC-MS to characterize saccharide materials in paint samples, however the chromatographic profiles are often extremely different and it is impossible to compare them and reliably identify the paint binder. This paper presents a comparison between two different analytical procedures based on GC-MS for the analysis of saccharide materials in works-of-art. The research presented here evaluates the influence of the analytical procedure used, and how it impacts the sugar profiles obtained from the analysis of paint samples that contain saccharide materials. The procedures have been developed, optimised and systematically used to characterise plant gums at the Getty Conservation Institute in Los Angeles, USA (GCI) and the Department of Chemistry and Industrial Chemistry of the University of Pisa, Italy (DCCI). The main steps of the analytical procedures and their optimisation are discussed. The results presented highlight that the two methods give comparable sugar profiles, whether the samples analysed are simple raw materials, pigmented and unpigmented paint replicas, or paint samples collected from hundreds of centuries old polychrome art objects. A common database of sugar profiles of reference materials commonly found in paint samples was thus compiled. The database presents data also from those materials that only contain a minor saccharide fraction. This database highlights how many sources of saccharides can be found in a paint sample, representing an important step forward in the problem of identifying polysaccharide binders in

Analytical Chemistry Laboratory (ACL) procedure compendium

International Nuclear Information System (INIS)

1992-06-01

Covered are: analytical laboratory operations (ALO) sample receipt and control, ALO data report/package preparation review and control, single shell tank (PST) project sample tracking system, sample receiving, analytical balances, duties and responsibilities of sample custodian, sample refrigerator temperature monitoring, security, assignment of staff responsibilities, sample storage, data reporting, and general requirements for glassware

An analytical procedure for computing smooth transitions between two specified cross sections with applications to blended wing body configuration

Science.gov (United States)

Barger, R. L.

1982-01-01

An analytical procedure is described for designing smooth transition surfaces for blended wing-body configurations. Starting from two specified cross section shapes, the procedure generates a gradual transition from one cross section shape to the other as an analytic blend of the two shapes. The method utilizes a conformal mapping, with subsequent translation and scaling, to transform the specified and shapes to curves that can be combined more smoothly. A sample calculation is applied to a blended wing-body missile type configuration with a top mounted inlet.

Integrating analytical procedures into the continuous audit environment

Directory of Open Access Journals (Sweden)

Eija Koskivaara

2006-12-01

Full Text Available The objective of this article is to show how to embed analytical procedures (AP into the continuous audit environment. The audit environment is discussed in terms of audit phases, where the role of APs is to obtain evidence for auditors. The article addresses different characteristics of AP techniques. Furthermore, the article compares four different AP techniques to form expectations for the monthly sales values. Two of these techniques are simple quantitative ones, such as the previous year’s value and the mean of the previous years’ values. The advanced quantitative techniques are regression analysis and an artificial neural network (ANN-based model. In a comparison of the prediction results, the regression analysis and ANN model turn out to be equally good. The development of these kinds of tools is crucial to the continuous audit environment, especially when most data transmission between companies and their stakeholders are moved into the electronic form.

Gaming practices in everyday life. An analytical operationalization of field theory by means of practice theory

Directory of Open Access Journals (Sweden)

Claus Toft-Nielsen

2015-05-01

Full Text Available This article investigates digital game play (gaming as a specific media field (Bourdieu, 1984, p. 72, in which especially gaming capital (Consalvo, 2007 functions as a theoretical lens. We aim to analyse the specific practices that constitute and are constituted in and around gaming. This multitude of practices is theoretically qualified by the second generation of practice theorists, including (Bruchler & Postill, 2010; Reckwitz, 2002; Schatzki, 2008; Warde, 2005. The empirical data are drawn from qualitative studies of gamers and gaming practices (focus groups as well as participant observations, and function as exemplary cases that illustrate our theoretical arguments. Our purpose is to analytically operationalize field theory, by means of practice theory, to enhance our understanding of digital games as new media and the specific contexts and media practices herein.

Gaming practices in everyday life. An analytical operationalization of field theory by means of practice theory

DEFF Research Database (Denmark)

Toft-Nielsen, Claus; Krogager, Stinne Gunder Strøm

2015-01-01

This article investigates digital game play (gaming) as a specific media field (Bourdieu, 1984, p. 72), in which especially gaming capital (Consalvo, 2007) functions as a theoretical lens. We aim to analyse the specific practices that constitute and are constituted in and around gaming....... This multitude of practices is theoretically qualified by the second generation of practice theorists, including (Bruchler & Postill, 2010; Reckwitz, 2002; Schatzki, 2008; Warde, 2005). The empirical data are drawn from qualitative studies of gamers and gaming practices (focus groups as well as participant...... observations), and function as exemplary cases that illustrate our theoretical arguments. Our purpose is to analytically operationalize field theory, by means of practice theory, to enhance our understanding of digital games as new media and the specific contexts and media practices herein....

Safe injection procedures, injection practices, and needlestick ...

African Journals Online (AJOL)

Results: Safe injection procedures regarding final waste disposal were sufficiently adopted, while measures regarding disposable injection equipment, waste containers, hand hygiene, as well as injection practices were inadequately carried out. Lack of job aid posters that promote safe injection and safe disposal of ...

Safe injection procedures, injection practices, and needlestick ...

African Journals Online (AJOL)

Nermine Mohamed Tawfik Foda

2017-01-10

Jan 10, 2017 ... Background: Of the estimated 384,000 needle-stick injuries occurring in hospitals each year, 23% occur in surgical settings. This study was conducted to assess safe injection procedures, injection practices, and circumstances contributing to needlestick and sharps injures (NSSIs) in operating rooms.

A Modified GC-MS Analytical Procedure for Separation and Detection of Multiple Classes of Carbohydrates

Directory of Open Access Journals (Sweden)

Yong-Gang Xia

2018-05-01

Full Text Available A modified GC-MS analytical procedure based on trimethylsilyl-dithioacetal (TMSD derivatization has been established for a simultaneous determination of thirteen carbohydrates. Different from previous approaches, the current GC-MS method was featured by a powerful practicability for simultaneous detection of aldoses, uronic acids, ketoses, and amino sugars; simplifying GC-MS chromatograms and producing a single peak for each derivatized sugar, as well as high resolution, sensitivity, and repeatability. An additional liquid-liquid extraction from derivatization mixtures was performed not only to increase the detection sensitivity of amino sugars but also to decrease the by-products of derivatization. Contrarily, three amino sugars were detected at a very low intensity or not detected at all. The effect of time on monosaccharide- mercaptalated reaction was systematically investigated. The effect of trimethylsilylation on the formation of TMSD was also optimized. The established GC-MS based on TMSD derivatization was suitable for complex carbohydrate analysis and has been successfully applied for the detection of free carbohydrates in water extracts of Anemarrhena asphodeloides roots and determination of monosaccharides in Glossy ganoderma polysaccharides.

Quantifying the measurement uncertainty of results from environmental analytical methods.

Science.gov (United States)

Moser, J; Wegscheider, W; Sperka-Gottlieb, C

2001-07-01

The Eurachem-CITAC Guide Quantifying Uncertainty in Analytical Measurement was put into practice in a public laboratory devoted to environmental analytical measurements. In doing so due regard was given to the provisions of ISO 17025 and an attempt was made to base the entire estimation of measurement uncertainty on available data from the literature or from previously performed validation studies. Most environmental analytical procedures laid down in national or international standards are the result of cooperative efforts and put into effect as part of a compromise between all parties involved, public and private, that also encompasses environmental standards and statutory limits. Central to many procedures is the focus on the measurement of environmental effects rather than on individual chemical species. In this situation it is particularly important to understand the measurement process well enough to produce a realistic uncertainty statement. Environmental analytical methods will be examined as far as necessary, but reference will also be made to analytical methods in general and to physical measurement methods where appropriate. This paper describes ways and means of quantifying uncertainty for frequently practised methods of environmental analysis. It will be shown that operationally defined measurands are no obstacle to the estimation process as described in the Eurachem/CITAC Guide if it is accepted that the dominating component of uncertainty comes from the actual practice of the method as a reproducibility standard deviation.

Development of quantitative analytical procedures on two-phase flow in tight-lattice fuel bundles for reduced-moderation light-water reactors

International Nuclear Information System (INIS)

Ohnuki, A.; Kureta, M.; Takae, K.; Tamai, H.; Akimoto, H.; Yoshida, H.

2004-01-01

The research project to investigate thermal-hydraulic performance in tight-lattice rod bundles for Reduced-Moderation Water Reactor (RMWR) started at Japan Atomic Energy Research Institute (JAERI) in 2002. The RMWR is a light water reactor for which a higher conversion ratio more than one can be expected. In order to attain this higher conversion ratio, triangular tight-lattice fuel bundles whose gap spacing between each fuel rod is around 1 mm are required. As for the thermal design of the RMWR core, conventional analytical methods are no good because the conventional composition equations can not predict the RMWR core with high accuracy. Then, development of new quantitative analytical procedures was carried out. Those analytical procedures are constructed by model experiments and advanced two-phase flow analysis codes. This paper describes the results of the model experiments and analytical results with the developed analysis codes. (authors)

Analytical procedures for water-soluble vitamins in foods and dietary supplements: a review.

Science.gov (United States)

Blake, Christopher J

2007-09-01

Water-soluble vitamins include the B-group vitamins and vitamin C. In order to correctly monitor water-soluble vitamin content in fortified foods for compliance monitoring as well as to establish accurate data banks, an accurate and precise analytical method is a prerequisite. For many years microbiological assays have been used for analysis of B vitamins. However they are no longer considered to be the gold standard in vitamins analysis as many studies have shown up their deficiencies. This review describes the current status of analytical methods, including microbiological assays and spectrophotometric, biosensor and chromatographic techniques. In particular it describes the current status of the official methods and highlights some new developments in chromatographic procedures and detection methods. An overview is made of multivitamin extractions and analyses for foods and supplements.

Differences in metabolite profiles caused by pre-analytical blood processing procedures.

Science.gov (United States)

Nishiumi, Shin; Suzuki, Makoto; Kobayashi, Takashi; Yoshida, Masaru

2018-05-01

Recently, the use of metabolomic analysis of human serum and plasma for biomarker discovery and disease diagnosis in clinical studies has been increasing. The feasibility of using a metabolite biomarker for disease diagnosis is strongly dependent on the metabolite's stability during pre-analytical blood processing procedures, such as serum or plasma sampling and sample storage prior to centrifugation. However, the influence of blood processing procedures on the stability of metabolites has not been fully characterized. In the present study, we compared the levels of metabolites in matched human serum and plasma samples using gas chromatography coupled with mass spectrometry and liquid chromatography coupled with mass spectrometry. In addition, we evaluated the changes in plasma metabolite levels induced by storage at room temperature or at a cold temperature prior to centrifugation. As a result, it was found that 76 metabolites exhibited significant differences between their serum and plasma levels. Furthermore, the pre-centrifugation storage conditions significantly affected the plasma levels of 45 metabolites. These results highlight the importance of blood processing procedures during metabolome analysis, which should be considered during biomarker discovery and the subsequent use of biomarkers for disease diagnosis. Copyright © 2017 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

CARVEDILOL POPULATION PHARMACOKINETIC ANALYSIS – APPLIED VALIDATION PROCEDURE

Directory of Open Access Journals (Sweden)

Aleksandra Catić-Đorđević

2013-09-01

Full Text Available Carvedilol is a nonselective beta blocker/alpha-1 blocker, which is used for treatment of essential hypertension, chronic stable angina, unstable angina and ischemic left ventricular dysfunction. The aim of this study was to describe carvedilol population pharmacokinetic (PK analysis as well as the validation of analytical procedure, which is an important step regarding this approach. In contemporary clinical practice, population PK analysis is often more important than standard PK approach in setting a mathematical model that describes the PK parameters. Also, it includes the variables that have particular importance in the drugs pharmacokinetics such as sex, body mass, dosage, pharmaceutical form, pathophysiological state, disease associated with the organism or the presence of a specific polymorphism in the isoenzyme important for biotransformation of the drug. One of the most frequently used approach in population PK analysis is the Nonlinear Modeling of Mixed Effects - NONMEM modeling. Analytical methods used in the data collection period is of great importance for the implementation of a population PK analysis of carvedilol in order to obtain reliable data that can be useful in clinical practice. High performance liquid chromatography (HPLC analysis of carvedilol is used to confirm the identity of a drug and provide quantitative results and also to monitor the efficacy of the therapy. Analytical procedures used in other studies could not be fully implemented in our research as it was necessary to perform certain modification and validation of the method with the aim of using the obtained results for the purpose of a population pharmacokinetic analysis. Validation process is a logical terminal phase of analytical procedure development that provides applicability of the procedure itself. The goal of validation is to ensure consistency of the method and accuracy of results or to confirm the selection of analytical method for a given sample

Military Justice: Courts of Military Review--Rules of Practice and Procedure

National Research Council Canada - National Science Library

1986-01-01

...) This revision, in conformity with the Military Justice Act of 1983 and Manual for Courts-Martial 1984, changes past practice and procedures in several significant areas, and alters other procedures...

Analytical procedure for experimental quantification of carrier concentration in semiconductor devices by using electric scanning probe microscopy

International Nuclear Information System (INIS)

Fujita, Takaya; Matsumura, Koji; Itoh, Hiroshi; Fujita, Daisuke

2014-01-01

Scanning capacitance microscopy (SCM) is based on a contact-mode variant of atomic force microscopy, which is used for imaging two-dimensional carrier (electrons and holes) distributions in semiconductor devices. We introduced a method of quantification of the carrier concentration by experimentally deduced calibration curves, which were prepared for semiconductor materials such as silicon and silicon carbide. The analytical procedure was circulated to research organizations in a round-robin test. The effectiveness of the method was confirmed for practical analysis and for what is expected for industrial pre-standardization from the viewpoint of comparability among users. It was also applied to other electric scanning probe microscopy techniques such as scanning spreading resistance microscopy and scanning nonlinear dielectric microscopy. Their depth profiles of carrier concentration were found to be in good agreement with those characterized by SCM. These results suggest that our proposed method will be compatible with future next-generation microscopy. (paper)

Definition, development, and demonstration of analytical procedures for the structured assessment approach. Final report

International Nuclear Information System (INIS)

1979-01-01

Analytical procedures were refined for the Structural Assessment Approach for assessing the Material Control and Accounting systems at facilities that contain special nuclear material. Requirements were established for an efficient, feasible algorithm to be used in evaluating system performance measures that involve the probability of detection. Algorithm requirements to calculate the probability of detection for a given type of adversary and the target set are described

An analytical inductor design procedure for three-phase PWM converters in power factor correction applications

DEFF Research Database (Denmark)

Kouchaki, Alireza; Niroumand, Farideh Javidi; Haase, Frerk

2015-01-01

This paper presents an analytical method for designing the inductor of three-phase power factor correction converters (PFCs). The complex behavior of the inductor current complicates the inductor design procedure as well as the core loss and copper loss calculations. Therefore, this paper analyze...... to calculate the core loss in the PFC application. To investigate the impact of the dc link voltage level, two inductors for different dc voltage levels are designed and the results are compared.......This paper presents an analytical method for designing the inductor of three-phase power factor correction converters (PFCs). The complex behavior of the inductor current complicates the inductor design procedure as well as the core loss and copper loss calculations. Therefore, this paper analyzes...... circuit is used to provide the inductor current harmonic spectrum. Therefore, using the harmonic spectrum, the low and high frequency copper losses are calculated. The high frequency minor B-H loops in one switching cycle are also analyzed. Then, the loss map provided by the measurement setup is used...

An off-line two-dimensional analytical procedure for determination of polcyclic aromatic hydrocarbons in smoke aerosol

NARCIS (Netherlands)

Claessens, H.A.; Lammerts van Bueren, L.G.D.

1987-01-01

Smoke aerosol from stoves consists of a wide variety of chemical substances of which a number have toxic properties. To study the impact of aerosol emissions on health and environment reliable analytical procedures must be available for these samples. An off-line two-dimensional HPLC method is

Median of patient results as a tool for assessment of analytical stability.

Science.gov (United States)

Jørgensen, Lars Mønster; Hansen, Steen Ingemann; Petersen, Per Hyltoft; Sölétormos, György

2015-06-15

In spite of the well-established external quality assessment and proficiency testing surveys of analytical quality performance in laboratory medicine, a simple tool to monitor the long-term analytical stability as a supplement to the internal control procedures is often needed. Patient data from daily internal control schemes was used for monthly appraisal of the analytical stability. This was accomplished by using the monthly medians of patient results to disclose deviations from analytical stability, and by comparing divergences with the quality specifications for allowable analytical bias based on biological variation. Seventy five percent of the twenty analytes achieved on two COBASs INTEGRA 800 instruments performed in accordance with the optimum and with the desirable specifications for bias. Patient results applied in analytical quality performance control procedures are the most reliable sources of material as they represent the genuine substance of the measurements and therefore circumvent the problems associated with non-commutable materials in external assessment. Patient medians in the monthly monitoring of analytical stability in laboratory medicine are an inexpensive, simple and reliable tool to monitor the steadiness of the analytical practice. Copyright © 2015 Elsevier B.V. All rights reserved.

Net Metering and Interconnection Procedures-- Incorporating Best Practices

Energy Technology Data Exchange (ETDEWEB)

Jason Keyes, Kevin Fox, Joseph Wiedman, Staff at North Carolina Solar Center

2009-04-01

State utility commissions and utilities themselves are actively developing and revising their procedures for the interconnection and net metering of distributed generation. However, the procedures most often used by regulators and utilities as models have not been updated in the past three years, in which time most of the distributed solar facilities in the United States have been installed. In that period, the Interstate Renewable Energy Council (IREC) has been a participant in more than thirty state utility commission rulemakings regarding interconnection and net metering of distributed generation. With the knowledge gained from this experience, IREC has updated its model procedures to incorporate current best practices. This paper presents the most significant changes made to IREC’s model interconnection and net metering procedures.

Methodological procedures and analytical instruments to evaluate an indicators integrated archive for urban management

International Nuclear Information System (INIS)

Del Ciello, R.; Napoleoni, S.

1998-01-01

This guide provides the results of a research developed at ENEA (National Agency for new Technology, Energy and the Environment) Casaccia center (Rome, Italy) aimed to define methodological procedures and analytical instruments needed to carry out an indicators integrated archive for urban management. The guide also defines the scheme of a negotiation process aimed to reach and exchange data and information among governmental and local administrations, non-governmental organizations and scientific bodies [it

A comparative examination of sample treatment procedures for ICAP-AES analysis of biological tissue

Science.gov (United States)

De Boer, J. L. M.; Maessen, F. J. M. J.

The objective of this study was to contribute to the evaluation of existing sample preparation procedures for ICAP-AES analysis of biological material. Performance characteristics were established of current digestion procedures comprising extraction, solubilization, pressure digestion, and wet and dry ashing methods. Apart from accuracy and precision, a number of criteria of special interest for the analytical practice was applied. As a test sample served SRM bovine liver. In this material six elements were simultaneously determined. Results showed that every procedure has its defects and advantages. Hence, unambiguous recommendation of standard digestion procedures can be made only when taking into account the specific analytical problem.

9 CFR 147.26 - Procedures for establishing isolation and maintaining sanitation and good management practices...

Science.gov (United States)

2010-01-01

... and maintaining sanitation and good management practices for the control of Salmonella and Mycoplasma... Sanitation Procedures § 147.26 Procedures for establishing isolation and maintaining sanitation and good management practices for the control of Salmonella and Mycoplasma infections. (a) The following procedures...

Procedure competencies and job functions of the urologic advanced practice nurse.

Science.gov (United States)

Kleier, Jo Ann

2009-01-01

A 2-round modified Delphi study recruited a panel urologic advanced practice nurse experts to identify the procedure competencies and job functions unique to the role of the advanced practice nurse specializing in the care of urology patients.

United States Nuclear Regulatory Commission Staff Practice and Procedure Digest

International Nuclear Information System (INIS)

1992-02-01

This revision of the sixth edition of the NRC Practice and Procedure Digest contains a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period of July 1, 1972 to March 31, 1991, interpreting the NRC's Rules of Practice in 10 CFR Part 2

United States Nuclear Regulatory Commission Staff practice and procedure digest

International Nuclear Information System (INIS)

1990-08-01

This Revision Number 7 of the fifth edition of the NRC Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period July 1, 1972 to March 31, 1990, interpreting the NRC's Rules of Practice in 10 CFR Part 2

United States Nuclear Regulatory Commission Staff Practice and Procedure Digest

International Nuclear Information System (INIS)

1992-05-01

This 2nd revision of the sixth edition of the NRC Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period of July 1, 1972 to June 30, 1991, interpreting the NRC's Rules of Practice in 10 CFR Part 2

United States Nuclear Regulatory Commission Staff Practice and Procedure Digest

International Nuclear Information System (INIS)

1993-08-01

This 7th revision of the sixth edition of the NRC Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period of July 1, 1972 to September 30, 1992, interpreting the NRC's Rules of Practice in 10 CFR Part 2

United States Nuclear Regulatory Commission Staff practice and procedure digest

International Nuclear Information System (INIS)

1993-05-01

This 6th revision of the sixth edition of the NRC Practice and Procedure Digest contains a digest of a number of commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period of July 1, 1972 to June 30, 1992, interpreting the NRC's Rules of Practice in 10 CFR Part 2

Role of the IAEA's ALMERA network in harmonization of analytical procedures applicable worldwide for radiological emergencies

International Nuclear Information System (INIS)

Pitois, A.; Osvath, I.; Tarjan, S.; Groening, M.; Osborn, D.; )

2016-01-01

The International Atomic Energy Agency (IAEA) coordinates and provides analytical support to the worldwide network of Analytical Laboratories for the Measurement of Environmental Radioactivity (ALMERA), consisting at the end of 2015 of 154 laboratories in 85 countries. This network, established by the IAEA in 1995, has for aim to provide timely and reliable measurement results of environmental radioactivity in routine monitoring and emergency situations. The IAEA supports the ALMERA laboratories in their routine and emergency response environmental monitoring activities by organizing proficiency tests and inter-laboratory comparison exercises, developing validated analytical procedures for environmental radioactivity measurement, and organizing training courses and workshops. The network also acts as a forum for sharing knowledge and expertise. The aim of this paper is to describe the current status of ALMERA analytical method development activities for radiological emergencies and the plans for further development in the field

Procedure prediction from symbolic Electronic Health Records via time intervals analytics.

Science.gov (United States)

Moskovitch, Robert; Polubriaginof, Fernanda; Weiss, Aviram; Ryan, Patrick; Tatonetti, Nicholas

2017-11-01

Prediction of medical events, such as clinical procedures, is essential for preventing disease, understanding disease mechanism, and increasing patient quality of care. Although longitudinal clinical data from Electronic Health Records provides opportunities to develop predictive models, the use of these data faces significant challenges. Primarily, while the data are longitudinal and represent thousands of conceptual events having duration, they are also sparse, complicating the application of traditional analysis approaches. Furthermore, the framework presented here takes advantage of the events duration and gaps. International standards for electronic healthcare data represent data elements, such as procedures, conditions, and drug exposures, using eras, or time intervals. Such eras contain both an event and a duration and enable the application of time intervals mining - a relatively new subfield of data mining. In this study, we present Maitreya, a framework for time intervals analytics in longitudinal clinical data. Maitreya discovers frequent time intervals related patterns (TIRPs), which we use as prognostic markers for modelling clinical events. We introduce three novel TIRP metrics that are normalized versions of the horizontal-support, that represents the number of TIRP instances per patient. We evaluate Maitreya on 28 frequent and clinically important procedures, using the three novel TIRP representation metrics in comparison to no temporal representation and previous TIRPs metrics. We also evaluate the epsilon value that makes Allen's relations more flexible with several settings of 30, 60, 90 and 180days in comparison to the default zero. For twenty-two of these procedures, the use of temporal patterns as predictors was superior to non-temporal features, and the use of the vertically normalized horizontal support metric to represent TIRPs as features was most effective. The use of the epsilon value with thirty days was slightly better than the zero

Optimization of instrumental neutron activation analysis method by means of 2k experimental design technique aiming the validation of analytical procedures

International Nuclear Information System (INIS)

Petroni, Robson; Moreira, Edson G.

2013-01-01

In this study optimization of procedures and standardization of Instrumental Neutron Activation Analysis (INAA) methods were carried out for the determination of the elements arsenic, chromium, cobalt, iron, rubidium, scandium, selenium and zinc in biological materials. The aim is to validate the analytical methods for future accreditation at the National Institute of Metrology, Quality and Technology (INMETRO). The 2 k experimental design was applied for evaluation of the individual contribution of selected variables of the analytical procedure in the final mass fraction result. Samples of Mussel Tissue Certified Reference Material and multi-element standards were analyzed considering the following variables: sample decay time, counting time and sample distance to detector. The standard multi-element concentration (comparator standard), mass of the sample and irradiation time were maintained constant in this procedure. By means of the statistical analysis and theoretical and experimental considerations it was determined the optimized experimental conditions for the analytical methods that will be adopted for the validation procedure of INAA methods in the Neutron Activation Analysis Laboratory (LAN) of the Research Reactor Center (CRPq) at the Nuclear and Energy Research Institute (IPEN - CNEN/SP). Optimized conditions were estimated based on the results of z-score tests, main effect and interaction effects. The results obtained with the different experimental configurations were evaluated for accuracy (precision and trueness) for each measurement. (author)

Measuring myokines with cardiovascular functions: pre-analytical variables affecting the analytical output.

Science.gov (United States)

Lombardi, Giovanni; Sansoni, Veronica; Banfi, Giuseppe

2017-08-01

In the last few years, a growing number of molecules have been associated to an endocrine function of the skeletal muscle. Circulating myokine levels, in turn, have been associated with several pathophysiological conditions including the cardiovascular ones. However, data from different studies are often not completely comparable or even discordant. This would be due, at least in part, to the whole set of situations related to the preparation of the patient prior to blood sampling, blood sampling procedure, processing and/or store. This entire process constitutes the pre-analytical phase. The importance of the pre-analytical phase is often not considered. However, in routine diagnostics, the 70% of the errors are in this phase. Moreover, errors during the pre-analytical phase are carried over in the analytical phase and affects the final output. In research, for example, when samples are collected over a long time and by different laboratories, a standardized procedure for sample collecting and the correct procedure for sample storage are acknowledged. In this review, we discuss the pre-analytical variables potentially affecting the measurement of myokines with cardiovascular functions.

United States Nuclear Regulatory Commission Staff practice and procedure digest

International Nuclear Information System (INIS)

1991-12-01

This sixth edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period from July 1, 1972 to December 31, 1990 interpreting the NRC's Rules of Practice in 10 CFR Part 2. This sixth edition replaces in part earlier editions and revisions and includes appropriate changes reflecting the amendments to the Rules of Practice effective through December 31, 1990

29 CFR 1913.10 - Rules of agency practice and procedure concerning OSHA access to employee medical records.

Science.gov (United States)

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Rules of agency practice and procedure concerning OSHA... PRACTICE AND PROCEDURE CONCERNING OSHA ACCESS TO EMPLOYEE MEDICAL RECORDS § 1913.10 Rules of agency practice and procedure concerning OSHA access to employee medical records. (a) General policy. OSHA access...

Analytical treatment of space-energy neutron distribution in reactor cell

International Nuclear Information System (INIS)

Stefanovic, D.

1971-01-01

Application of the analytical procedure described in this paper for study of fission spectrum evolution in the reactor cell gave results which enable complete understanding of neutron slowing down and transport p recesses and can be used for testing practical approximative methods. Heterogeneous system made of natural uranium and heavy water was used as an example

Decision Making in Reference to Model of Marketing Predictive Analytics – Theory and Practice

Directory of Open Access Journals (Sweden)

Piotr Tarka

2014-03-01

Full Text Available Purpose: The objective of this paper is to describe concepts and assumptions of predictive marketing analytics in reference to decision making. In particular, we highlight issues pertaining to the importance of data and the modern approach to data analysis and processing with the purpose of solving real marketing problems that companies encounter in business. Methodology: In this paper authors provide two study cases showing how, and to what extent predictive marketing analytics work can be useful in practice e.g., investigation of the marketing environment. The two cases are based on organizations operating mainly on Web site domain. The fi rst part of this article, begins a discussion with the explanation of a general idea of predictive marketing analytics. The second part runs through opportunities it creates for companies in the process of building strong competitive advantage in the market. The paper article ends with a brief comparison of predictive analytics versus traditional marketing-mix analysis. Findings: Analytics play an extremely important role in the current process of business management based on planning, organizing, implementing and controlling marketing activities. Predictive analytics provides the actual and current picture of the external environment. They also explain what problems are faced with the company in business activities. Analytics tailor marketing solutions to the right time and place at minimum costs. In fact they control the effi ciency and simultaneously increases the effectiveness of the firm. Practical implications: Based on the study cases comparing two enterprises carrying business activities in different areas, one can say that predictive analytics has far more been embraces extensively than classical marketing-mix analyses. The predictive approach yields greater speed of data collection and analysis, stronger predictive accuracy, better obtained competitor data, and more transparent models where one can

Less Physician Practice Competition Is Associated With Higher Prices Paid For Common Procedures.

Science.gov (United States)

Austin, Daniel R; Baker, Laurence C

2015-10-01

Concentration among physician groups has been steadily increasing, which may affect prices for physician services. We assessed the relationship in 2010 between physician competition and prices paid by private preferred provider organizations for fifteen common, high-cost procedures to understand whether higher concentration of physician practices and accompanying increased market power were associated with higher prices for services. Using county-level measures of the concentration of physician practices and county average prices, and statistically controlling for a range of other regional characteristics, we found that physician practice concentration and prices were significantly associated for twelve of the fifteen procedures we studied. For these procedures, counties with the highest average physician concentrations had prices 8-26 percent higher than prices in the lowest counties. We concluded that physician competition is frequently associated with prices. Policies that would influence physician practice organization should take this into consideration. Project HOPE—The People-to-People Health Foundation, Inc.

Standard operating procedures for pre-analytical handling of blood and urine for metabolomic studies and biobanks

Energy Technology Data Exchange (ETDEWEB)

Bernini, Patrizia; Bertini, Ivano, E-mail: bertini@cerm.unifi.it; Luchinat, Claudio [University of Florence, Magnetic Resonance Center (CERM) (Italy); Nincheri, Paola; Staderini, Samuele [FiorGen Foundation (Italy); Turano, Paola [University of Florence, Magnetic Resonance Center (CERM) (Italy)

2011-04-15

{sup 1}H NMR metabolic profiling of urine, serum and plasma has been used to monitor the impact of the pre-analytical steps on the sample quality and stability in order to propose standard operating procedures (SOPs) for deposition in biobanks. We analyzed the quality of serum and plasma samples as a function of the elapsed time (t = 0-4 h) between blood collection and processing and of the time from processing to freezing (up to 24 h). The stability of the urine metabolic profile over time (up to 24 h) at various storage temperatures was monitored as a function of the different pre-analytical treatments like pre-storage centrifugation, filtration, and addition of the bacteriostatic preservative sodium azide. Appreciable changes in the profiles, reflecting changes in the concentration of a number of metabolites, were detected and discussed in terms of chemical and enzymatic reactions for both blood and urine samples. Appropriate procedures for blood derivatives collection and urine preservation/storage that allow maintaining as much as possible the original metabolic profile of the fresh samples emerge, and are proposed as SOPs for biobanking.

Standard operating procedures for pre-analytical handling of blood and urine for metabolomic studies and biobanks.

Science.gov (United States)

Bernini, Patrizia; Bertini, Ivano; Luchinat, Claudio; Nincheri, Paola; Staderini, Samuele; Turano, Paola

2011-04-01

(1)H NMR metabolic profiling of urine, serum and plasma has been used to monitor the impact of the pre-analytical steps on the sample quality and stability in order to propose standard operating procedures (SOPs) for deposition in biobanks. We analyzed the quality of serum and plasma samples as a function of the elapsed time (t = 0-4 h) between blood collection and processing and of the time from processing to freezing (up to 24 h). The stability of the urine metabolic profile over time (up to 24 h) at various storage temperatures was monitored as a function of the different pre-analytical treatments like pre-storage centrifugation, filtration, and addition of the bacteriostatic preservative sodium azide. Appreciable changes in the profiles, reflecting changes in the concentration of a number of metabolites, were detected and discussed in terms of chemical and enzymatic reactions for both blood and urine samples. Appropriate procedures for blood derivatives collection and urine preservation/storage that allow maintaining as much as possible the original metabolic profile of the fresh samples emerge, and are proposed as SOPs for biobanking.

Standard operating procedures for pre-analytical handling of blood and urine for metabolomic studies and biobanks

International Nuclear Information System (INIS)

Bernini, Patrizia; Bertini, Ivano; Luchinat, Claudio; Nincheri, Paola; Staderini, Samuele; Turano, Paola

2011-01-01

1 H NMR metabolic profiling of urine, serum and plasma has been used to monitor the impact of the pre-analytical steps on the sample quality and stability in order to propose standard operating procedures (SOPs) for deposition in biobanks. We analyzed the quality of serum and plasma samples as a function of the elapsed time (t = 0−4 h) between blood collection and processing and of the time from processing to freezing (up to 24 h). The stability of the urine metabolic profile over time (up to 24 h) at various storage temperatures was monitored as a function of the different pre-analytical treatments like pre-storage centrifugation, filtration, and addition of the bacteriostatic preservative sodium azide. Appreciable changes in the profiles, reflecting changes in the concentration of a number of metabolites, were detected and discussed in terms of chemical and enzymatic reactions for both blood and urine samples. Appropriate procedures for blood derivatives collection and urine preservation/storage that allow maintaining as much as possible the original metabolic profile of the fresh samples emerge, and are proposed as SOPs for biobanking.

United States Nuclear Regulatory Commission Staff Practice and Procedure Digest

International Nuclear Information System (INIS)

1990-11-01

This Revision 8 of the fifth edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board and Atomic Safety and Licensing Board decisions issued during the period from July 1, 1972 to June 30, 1990 interpreting the NRC's Rules of Practice in 10 CFR Part 2. This Revision 8 replaces in part earlier editions and revisions and includes appropriate changes reflecting the amendments to the Rules of Practice effective through June 30, 1990

Analytical Procedures for Testability.

Science.gov (United States)

1983-01-01

Beat Internal Classifications", AD: A018516. "A System of Computer Aided Diagnosis with Blood Serum Chemistry Tests and Bayesian Statistics", AD: 786284...6 LIST OF TALS .. 1. Truth Table ......................................... 49 2. Covering Problem .............................. 93 3. Primary and...quential classification procedure in a coronary care ward is evaluated. In the toxicology field "A System of Computer Aided Diagnosis with Blood Serum

Radioimmunoassay. A revolution in the analytic procedure

Energy Technology Data Exchange (ETDEWEB)

Strecker, H; Eckert, H G [Farbwerke Hoechst A.G., Frankfurt am Main (Germany, F.R.). Radiochemisches Lab.

1978-04-01

Radioimmunoassay is an analytic method which combines the sensitivity of radioactive measurement and the specificity of the antigen-antibody reaction Substances down to a concentration of some picograms per ml serum (or biological material) can be measured in the presence of a millionfold excess of otherwise interfering substances. The method is easy to carry out (test tube chemistry). The main field of application at the moment is in endocrinology; further possibilities of application are in pharmaceutical research, environmental protection, forensic medicine, and for general analytic purposes. Radioactive sources are used only in vitro in the nanocurie range, i.e. radiation exposure is negligible.

Simultaneous grouping and ranking with combination of SOM and TOPSIS for selection of preferable analytical procedure for furan determination in food.

Science.gov (United States)

Jędrkiewicz, Renata; Tsakovski, Stefan; Lavenu, Aurore; Namieśnik, Jacek; Tobiszewski, Marek

2018-02-01

Novel methodology for grouping and ranking with application of self-organizing maps and multicriteria decision analysis is presented. The dataset consists of 22 objects that are analytical procedures applied to furan determination in food samples. They are described by 10 variables, referred to their analytical performance, environmental and economic aspects. Multivariate statistics analysis allows to limit the amount of input data for ranking analysis. Assessment results show that the most beneficial procedures are based on microextraction techniques with GC-MS final determination. It is presented how the information obtained from both tools complement each other. The applicability of combination of grouping and ranking is also discussed. Copyright © 2017 Elsevier B.V. All rights reserved.

Reflections on Klein's radical notion of phantasy and its implications for analytic practice.

Science.gov (United States)

Blass, Rachel B

2017-06-01

Analysts may incorporate many of Melanie Klein's important contributions (e.g., on preoedipal dynamics, envy, and projective identification) without transforming their basic analytic approach. In this paper I argue that adopting the Kleinian notion of unconscious phantasy is transformative. While it is grounded in Freud's thinking and draws out something essential to his work, this notion of phantasy introduces a radical change that defines Kleinian thinking and practice and significantly impacts the analyst's basic clinical approach. This impact and its technical implications in the analytic situation are illustrated and discussed. Copyright © 2017 Institute of Psychoanalysis.

Optimization of instrumental neutron activation analysis method by means of 2{sup k} experimental design technique aiming the validation of analytical procedures

Energy Technology Data Exchange (ETDEWEB)

Petroni, Robson; Moreira, Edson G., E-mail: rpetroni@ipen.br, E-mail: emoreira@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2013-07-01

In this study optimization of procedures and standardization of Instrumental Neutron Activation Analysis (INAA) methods were carried out for the determination of the elements arsenic, chromium, cobalt, iron, rubidium, scandium, selenium and zinc in biological materials. The aim is to validate the analytical methods for future accreditation at the National Institute of Metrology, Quality and Technology (INMETRO). The 2{sup k} experimental design was applied for evaluation of the individual contribution of selected variables of the analytical procedure in the final mass fraction result. Samples of Mussel Tissue Certified Reference Material and multi-element standards were analyzed considering the following variables: sample decay time, counting time and sample distance to detector. The standard multi-element concentration (comparator standard), mass of the sample and irradiation time were maintained constant in this procedure. By means of the statistical analysis and theoretical and experimental considerations it was determined the optimized experimental conditions for the analytical methods that will be adopted for the validation procedure of INAA methods in the Neutron Activation Analysis Laboratory (LAN) of the Research Reactor Center (CRPq) at the Nuclear and Energy Research Institute (IPEN - CNEN/SP). Optimized conditions were estimated based on the results of z-score tests, main effect and interaction effects. The results obtained with the different experimental configurations were evaluated for accuracy (precision and trueness) for each measurement. (author)

MRI-guided stereotactic neurosurgical procedures in a diagnostic MRI suite: Background and safe practice recommendations.

Science.gov (United States)

Larson, Paul S; Willie, Jon T; Vadivelu, Sudhakar; Azmi-Ghadimi, Hooman; Nichols, Amy; Fauerbach, Loretta Litz; Johnson, Helen Boehm; Graham, Denise

2017-07-01

The development of navigation technology facilitating MRI-guided stereotactic neurosurgery has enabled neurosurgeons to perform a variety of procedures ranging from deep brain stimulation to laser ablation entirely within an intraoperative or diagnostic MRI suite while having real-time visualization of brain anatomy. Prior to this technology, some of these procedures required multisite workflow patterns that presented significant risk to the patient during transport. For those facilities with access to this technology, safe practice guidelines exist only for procedures performed within an intraoperative MRI. There are currently no safe practice guidelines or parameters available for facilities looking to integrate this technology into practice in conventional MRI suites. Performing neurosurgical procedures in a diagnostic MRI suite does require precautionary measures. The relative novelty of technology and workflows for direct MRI-guided procedures requires consideration of safe practice recommendations, including those pertaining to infection control and magnet safety issues. This article proposes a framework of safe practice recommendations designed for assessing readiness and optimization of MRI-guided neurosurgical interventions in the diagnostic MRI suite in an effort to mitigate patient risk. The framework is based on existing clinical evidence, recommendations, and guidelines related to infection control and prevention, health care-associated infections, and magnet safety, as well as the clinical and practical experience of neurosurgeons utilizing this technology. © 2017 American Society for Healthcare Risk Management of the American Hospital Association.

Analytics for smart energy management tools and applications for sustainable manufacturing

CERN Document Server

Oh, Seog-Chan

2016-01-01

This book introduces the issues and problems that arise when implementing smart energy management for sustainable manufacturing in the automotive manufacturing industry and the analytical tools and applications to deal with them. It uses a number of illustrative examples to explain energy management in automotive manufacturing, which involves most types of manufacturing technology and various levels of energy consumption. It demonstrates how analytical tools can help improve energy management processes, including forecasting, consumption, and performance analysis, emerging new technology identification as well as investment decisions for establishing smart energy consumption practices. It also details practical energy management systems, making it a valuable resource for professionals involved in real energy management processes, and allowing readers to implement the procedures and applications presented.

Good practices with respect to the development and use of nuclear power plant procedures

International Nuclear Information System (INIS)

1998-12-01

This technical publication is intended to provide information to nuclear power plant managers concerning good practices in respect to the development and use of NPP procedures. It is a part of an ongoing project on nuclear power plant instrumentation and control and is based on lessons learned from NPPs and utilities. The overall objective of this project is to provide systematic guidance on current and emerging instrumentation and control technologies including: protection and automation systems, control rooms, operator support systems, training simulators and human factors. It is intended to be applicable to NPPs in Member States that are in operation, under construction or being commissioned. The good practices described are consistent with the IAEA Safety Series recommendations with respect to the development and use of NPP procedures including the four categories: administrative procedures, operating procedures (normal, alarm response, abnormal and emergency procedures), maintenance and technical support procedures, and testing and surveillance procedures

Mega-Analysis of School Psychology Blueprint for Training and Practice Domains

Science.gov (United States)

Burns, Matthew K.; Kanive, Rebecca; Zaslofsky, Anne F.; Parker, David C.

2013-01-01

Meta-analytic research is an effective method for synthesizing existing research and for informing practice and policy. Hattie (2009) suggested that meta-analytic procedures could be employed to existing meta-analyses to create a mega-analysis. The current mega-analysis examined a sample of 47 meta-analyses according to the "School…

In situ impulse test: an experimental and analytical evaluation of data interpretation procedures

International Nuclear Information System (INIS)

1975-08-01

Special experimental field testing and analytical studies were undertaken at Fort Lawton in Seattle, Washington, to study ''close-in'' wave propagation and evaluate data interpretation procedures for a new in situ impulse test. This test was developed to determine the shear wave velocity and dynamic modulus of soils underlying potential nuclear power plant sites. The test is different from conventional geophysical testing in that the velocity variation with strain is determined for each test. In general, strains between 10 -1 and 10 -3 percent are achieved. The experimental field work consisted of performing special tests in a large test sand fill to obtain detailed ''close-in'' data. Six recording transducers were placed at various points on the energy source, while approximately 37 different transducers were installed within the soil fill, all within 7 feet of the energy source. Velocity measurements were then taken simultaneously under controlled test conditions to study shear wave propagation phenomenology and help evaluate data interpretation procedures. Typical test data are presented along with detailed descriptions of the results

Democratic Deliberation Procedures : Theoretical and Practical Issues

Directory of Open Access Journals (Sweden)

Tutui Viorel

2011-01-01

Full Text Available Abstract : In contemporary political philosophy, the focus of the most important controversies is on the deliberative model of democracy. These controversies concern not only the theoretical problem of providing the best justification for a deliberative model of democratic legitimacy, but also the practical problem of designing the best deliberative procedure that will secure the implementation of deliberative democracy. In this paper I will present and analyze some of the most important deliberative designs: deliberative polls, citizens’ juries, consensus conferences and planning cells. I argue that these deliberative events can have a significant impact on the political behavior of a democratic community. However, I explain that all of them have only a limited influence on the policy-making activities in local and central governing structures. This is the reason why I believe we could only supplement and never fully replace the traditional aggregative procedures of democracy (voting and bargaining with a deliberative design.

Using a standards committee to design practical procedure system improvements

International Nuclear Information System (INIS)

Grider, D.A.; Plung, D.

1993-01-01

In the post-Three Mile Island (TMI) environment, numerous reports have been issued on how to improve the quality of procedures used at government and commercial nuclear facilities. The studies tend to be long on what is wrong with existing procedures and short on practical directions on how to fix those faults. Few of these studies have been conducted by practitioners with full-time procedure-managing or procedure writing experience. None of these studies go into detail on how to improve the procedure system itself. Over the last 10 yr, various nuclear facilities within the US Department of Energy (DOE) have carried out individual programs to develop procedures that meet post-TMI standards. However, ∼2 yr ago, DOE formed a Procedures Standards Committee to advise DOE in developing a set of post-TMI guidelines that could be consistently applied throughout all DOE nuclear facilities. The committee has achieved not only its original mission by producing a series of integrated guidance documents but has also evolved a systems approach to procedures management that sets new standards for procedure quality and efficiency. As members of this committee, the authors want to describe what has made the group's approach so successful. The lessons learned may be translatable to a wide range of government and commercial industry procedure programs

A review of simple multiple criteria decision making analytic procedures which are implementable on spreadsheet packages

Directory of Open Access Journals (Sweden)

T.J. Stewart

2003-12-01

Full Text Available A number of modern multi-criteria decision making aids for the discrete choice problem, are reviewed, with particular emphasis on those which can be implemented on standard commercial spreadsheet packages. Three broad classes of procedures are discussed, namely the analytic hierarchy process, reference point methods, and outranking methods. The broad principles are summarised in a consistent framework, and on a spreadsheet. LOTUS spreadsheets implementing these are available from the author.

Training the next generation analyst using red cell analytics

Science.gov (United States)

Graham, Meghan N.; Graham, Jacob L.

2016-05-01

We have seen significant change in the study and practice of human reasoning in recent years from both a theoretical and methodological perspective. Ubiquitous communication coupled with advances in computing and a plethora of analytic support tools have created a push for instantaneous reporting and analysis. This notion is particularly prevalent in law enforcement, emergency services and the intelligence community (IC), where commanders (and their civilian leadership) expect not only a birds' eye view of operations as they occur, but a play-by-play analysis of operational effectiveness. This paper explores the use of Red Cell Analytics (RCA) as pedagogy to train the next-gen analyst. A group of Penn State students in the College of Information Sciences and Technology at the University Park campus of The Pennsylvania State University have been practicing Red Team Analysis since 2008. RCA draws heavily from the military application of the same concept, except student RCA problems are typically on non-military in nature. RCA students utilize a suite of analytic tools and methods to explore and develop red-cell tactics, techniques and procedures (TTPs), and apply their tradecraft across a broad threat spectrum, from student-life issues to threats to national security. The strength of RCA is not always realized by the solution but by the exploration of the analytic pathway. This paper describes the concept and use of red cell analytics to teach and promote the use of structured analytic techniques, analytic writing and critical thinking in the area of security and risk and intelligence training.

Learn, see, practice, prove, do, maintain: an evidence-based pedagogical framework for procedural skill training in medicine.

Science.gov (United States)

Sawyer, Taylor; White, Marjorie; Zaveri, Pavan; Chang, Todd; Ades, Anne; French, Heather; Anderson, JoDee; Auerbach, Marc; Johnston, Lindsay; Kessler, David

2015-08-01

Acquisition of competency in procedural skills is a fundamental goal of medical training. In this Perspective, the authors propose an evidence-based pedagogical framework for procedural skill training. The framework was developed based on a review of the literature using a critical synthesis approach and builds on earlier models of procedural skill training in medicine. The authors begin by describing the fundamentals of procedural skill development. Then, a six-step pedagogical framework for procedural skills training is presented: Learn, See, Practice, Prove, Do, and Maintain. In this framework, procedural skill training begins with the learner acquiring requisite cognitive knowledge through didactic education (Learn) and observation of the procedure (See). The learner then progresses to the stage of psychomotor skill acquisition and is allowed to deliberately practice the procedure on a simulator (Practice). Simulation-based mastery learning is employed to allow the trainee to prove competency prior to performing the procedure on a patient (Prove). Once competency is demonstrated on a simulator, the trainee is allowed to perform the procedure on patients with direct supervision, until he or she can be entrusted to perform the procedure independently (Do). Maintenance of the skill is ensured through continued clinical practice, supplemented by simulation-based training as needed (Maintain). Evidence in support of each component of the framework is presented. Implementation of the proposed framework presents a paradigm shift in procedural skill training. However, the authors believe that adoption of the framework will improve procedural skill training and patient safety.

UN Security Council Practice and Regional Arrangements: Procedure, Legitimacy and International Justice

DEFF Research Database (Denmark)

Cullen, Miriam

2015-01-01

When the United Nations Security Council first met in January 1946, it was unable to reach agreement on rules of procedure to govern its operation. Instead, “provisional” rules were adopted in anticipation of further negotiation at a later date. The same provisional rules govern the Council’s work...... today, but provide only the skeletal framework of its contemporary practice. From the early 1990s, the Council increasingly implemented informal working methods to expedite its decision-making. This paper will critically examine the tension between the procedural practice of the Security Council...... to act ‘in conformity with the principles of justice and international law’ as stipulated in the very first provision of the United Nations Charter. Scholarship to date has largely ignored the procedural context of Security Council decisions, notwithstanding it provides the very structure within which...

An analytical procedure to evaluate electronic integrals for molecular quantum mechanical calculations

International Nuclear Information System (INIS)

Mundim, Kleber C.

2004-01-01

Full text: We propose an alternative methodology for the calculation of electronic integrals, through an analytical function based on the generalized Gaussian function (q Gaussian), where a single q Gaussian replaces the usual linear combination of Gaussian functions for different basis set. Moreover, the integrals become analytical functions of the interatomic distances. Therefore, when estimating certain quantities such as molecular energy, g Gaussian avoid new calculations of the integrals: they are simply another value of the corresponding function. The procedure proposed here is particularly advantageous, when compared with the usual one, because it reduces drastically the number of two-electronic integrals used in the construction of the Fock matrix, enabling the use of the quantum mechanics in the description of macro-molecular systems. This advantage increases when the size of the molecular systems become larger and more complex. While in the usual approach CPU time increases with n4, in the one proposed here the CPU time scales linearly with n. This catastrophic dependence of the rank the Hamiltonian or Fock matrix with n4 two-electron integrals is a severe bottleneck for petaFLOPS computing time. Its is important to emphasize that this methodology is equally applicable to systems of any sizes, including biomolecules, solid materials and solutions, within the HF, post-HF and DFT theories. (author)

Analytical quality, performance indices and laboratory service

DEFF Research Database (Denmark)

Hilden, Jørgen; Magid, Erik

1999-01-01

analytical error, bias, cost effectiveness, decision-making, laboratory techniques and procedures, mass screening, models, statistical, quality control......analytical error, bias, cost effectiveness, decision-making, laboratory techniques and procedures, mass screening, models, statistical, quality control...

10 CFR 95.19 - Changes to security practices and procedures.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Changes to security practices and procedures. 95.19 Section 95.19 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) FACILITY SECURITY CLEARANCE AND..., also to the Director, Division of Security Operations, Office of Nuclear Security and Incident Response...

The Analytical Hierarchy Process

DEFF Research Database (Denmark)

Barfod, Michael Bruhn

2007-01-01

The technical note gathers the theory behind the Analytical Hierarchy Process (AHP) and present its advantages and disadvantages in practical use.......The technical note gathers the theory behind the Analytical Hierarchy Process (AHP) and present its advantages and disadvantages in practical use....

Standard practices for sampling uranium-Ore concentrate

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 These practices are intended to provide the nuclear industry with procedures for obtaining representative bulk samples from uranium-ore concentrates (UOC) (see Specification C967). 1.2 These practices also provide for obtaining a series of representative secondary samples from the original bulk sample for the determination of moisture and other test purposes, and for the preparation of pulverized analytical samples (see Test Methods C1022). 1.3 These practices consist of a number of alternative procedures for sampling and sample preparation which have been shown to be satisfactory through long experience in the nuclear industry. These procedures are described in the following order. Stage Procedure Section Primary Sampling One-stage falling stream 4 Two-stage falling stream 5 Auger 6 Secondary Sampling Straight-path (reciprocating) 7 Rotating (Vezin) 8, 9 Sample Preparation 10 Concurrent-drying 11-13 Natural moisture 14-16 Calcination 17, 18 Sample Packaging 19 Wax s...

General Procedure for the Easy Calculation of pH in an Introductory Course of General or Analytical Chemistry

Science.gov (United States)

Cepriá, Gemma; Salvatella, Luis

2014-01-01

All pH calculations for simple acid-base systems used in introductory courses on general or analytical chemistry can be carried out by using a general procedure requiring the use of predominance diagrams. In particular, the pH is calculated as the sum of an independent term equaling the average pK[subscript a] values of the acids involved in the…

Procedures and Practices - Challenges for Decommissioning Management and Teamwork

Energy Technology Data Exchange (ETDEWEB)

Rindahl, G., E-mail: grete.rindahl@hrp.no [Institute for Energy Technology, Halden (Norway)

2013-08-15

The mental and practical approach to a decommissioning project is often not the same at all levels of an organization. Studies indicate that the early establishment of a decommissioning mindset throughout an organization is an important and frequently overlooked process. It is not enough to establish procedures, if practices and mental approaches are overlooked; and for decommissioning projects that are more often than not dominated by one of a kind problem solving, procedure design is challenging, and new requirements are put on communication. Our research considers stakeholder involvement in these processes in the wider sense of the term; however the main stakeholders in focus are regulators and the work force that will perform or lead the tasks related to decommissioning. Issues here treated include: Decommissioning mindset and the manifestation of mindset issues in decommissioning projects, including challenges and prospective solutions; trust building and trust breaking factors in communication and collaboration relevant to transition and decommissioning; new technologies for collaboration and communication and how these may impair or empower participants - experiences from several domains. This paper is based on work done in collaboration with the OECD NEA Halden Reactor Project. (author)

Analytical Chemistry Laboratory (ACL) procedure compendium. Volume 1, Administrative

Energy Technology Data Exchange (ETDEWEB)

1992-06-01

Covered are: analytical laboratory operations (ALO) sample receipt and control, ALO data report/package preparation review and control, single shell tank (PST) project sample tracking system, sample receiving, analytical balances, duties and responsibilities of sample custodian, sample refrigerator temperature monitoring, security, assignment of staff responsibilities, sample storage, data reporting, and general requirements for glassware.

The medical practice of euthanasia in Belgium and The Netherlands: legal notification, control and evaluation procedures.

Science.gov (United States)

Smets, Tinne; Bilsen, Johan; Cohen, Joachim; Rurup, Mette L; De Keyser, Els; Deliens, Luc

2009-05-01

To describe and compare current legal procedures for notifying, controlling and evaluating (NCE-procedures) euthanasia in Belgium and the Netherlands, and to discuss the implications for a safe and controllable euthanasia practice. We systematically studied and compared official documents relating to the Belgian and the Dutch NCE-procedures for euthanasia. In both countries, physicians are required to notify their cases to a review Committee, stimulating them to safeguard the quality of their euthanasia practice and to make societal control over the practice of euthanasia possible. However, the procedures in both countries differ. The main differences are that the Dutch notification and control procedures are more elaborate and transparent than the Belgian, and that the Belgian procedures are primarily anonymous, whereas the Dutch are not. Societal evaluation is made in both countries through the Committees' summary reports to Parliament. Transparent procedures like the Dutch may better facilitate societal control. Informing physicians about the law and the due care requirements for euthanasia, and systematic feedback about their medical actions are both pivotal to achieving efficient societal control and engendering the level of care needed when performing such far-reaching medical acts.

Th-U-PbT dating by Electron Probe Microanalysis, Part I. Monazite: analytical procedures and data treatment

International Nuclear Information System (INIS)

Vlach, Silvio Roberto Farias

2010-01-01

Dating methodology by the electron probe microanalyser (EPMA) of (Th, U)-bearing minerals, highlighting monazite, acquired greater than ever importance in literature, particularly due to its superior spatial resolution, as well as versatility, which allow correlating petrological processes at times registered only in micro-scales in minerals and rocks with absolute ages. Although the accuracy is inferior to the one achieved with conventional isotopic methods in up to an order of magnitude, EPMA is the instrument that allows the best spatial resolution, reaching a few μm 3 in some conditions. Quantification of minor and trace elements with suitable precision and accuracy involves the own instrumental and analytical set-ups and data treatment strategies, significantly more rigorous when compared with those applied in conventional analyses. Th-U-Pb T dating is an example of these cases. Each EPMA is a unique machine as for its instrumental characteristics and respective automation system. In such a way, analytical procedures ought to be adjusted for laboratory specificities. The analytical strategies and data treatment adopted in the Electronic Microprobe Laboratory from Instituto de Geociencias of Universidade de Sao Paulo, Brazil, with a JEOL JXA8600S EPMA, and a ThermoNoran-Voyager 4.3 automation system, are presented and compared with the ones used in other laboratories. The influence of instrumental factors and spectral overlaps on Th, U, and Pb quantification is discussed. Applied procedures to interference correction, error propagation, data treatment, and fi nal chemical age presentation as well as to sampling and analyses are emphasized. Some typical applications are discussed, drawing attention to the most relevant aspects of electron microprobe dating. (author)

Practical borehole logging procedures for mineral exploration, with emphasis on uranium

International Nuclear Information System (INIS)

1986-01-01

Borehole logging is a basic tool in the exploration for and delineation of uranium deposits. This manual describes recommended procedures for carrying out borehole logging, concentrating on practical aspects of the operation of interest to those actually involved in day-to-day field work. The book begins with a discussion of boreholes and then deals with gamma ray logging as the main method of interest. Information is also provided on other techniques including resistance, spontaneous potential, density and neutron logging. Field procedures are described, and examples of logs and interpretations are given. The appendices provide information on calibration procedures and correction factors, a glossary of useful terms and some relevant basic data regarding drill holes and drilling

Study of operating procedures in nuclear power plants: Practices and problems

International Nuclear Information System (INIS)

Morgenstern, M.H.; Barnes, V.E.; McGuire, M.V.; Radford, L.R.; Wheeler, W.A.

1987-02-01

This report describes the project activities, findings, and recommendations of a project entitled ''Program Plan for Assessing and Upgrading Operating Procedures for Nuclear Power Plants.'' The project was performed by the Pacific Northwest Laboratory and Battelle Human Affairs Research Centers for the Division of Human Factors Technology, Office of Nuclear Reactor Regulation, US Nuclear Regulatory Commission (NRC). The project team analyzed and evaluated samples of normal and abnormal operating procedures from 31 commercial nuclear power plant sites operating in the United States. The project team also visited nine nuclear power plants in the United States to obtain information on the development, use, and control of operating procedures. A peer review group was convened to advise the project team on the conduct of the project and to review and comment on the project report. The report contains findings on the usability of operating procedures and on practices concerning the development, use, an control of operating procedures in nuclear power plants. The report includes recommendations to the NRC on the need to upgrade the quality of operating procedures. The report also discusses an approach to a program plan to assess and upgrade operating procedures

HASL procedures manual

International Nuclear Information System (INIS)

Harley, J.H.

1977-08-01

Additions and corrections to the following sections of the HASL Procedures Manual are provided: General, Sampling, Field Measurements; General Analytical Chemistry, Chemical Procedures, Data Section, and Specifications

Procedural confidence in hospital based practitioners: implications for the training and practice of doctors at all grades

Directory of Open Access Journals (Sweden)

Tsagkaraki Petroula A

2009-01-01

Full Text Available Abstract Background Medical doctors routinely undertake a number of practical procedures and these should be performed competently. The UK Postgraduate Medical Education and Training Board (PMETB curriculum lists the procedures trainees should be competent in. We aimed to describe medical practitioner's confidence in their procedural skills, and to define which practical procedures are important in current medical practice. Methods A cross sectional observational study was performed measuring procedural confidence in 181 hospital practitioners at all grades from 2 centres in East Anglia, England. Results Both trainees and consultants provide significant service provision. SpR level doctors perform the widest range and the highest median number of procedures per year. Most consultants perform few if any procedures, however some perform a narrow range at high volume. Cumulative confidence for the procedures tested peaks in the SpR grade. Five key procedures (central line insertion, lumbar puncture, pleural aspiration, ascitic aspiration, and intercostal drain insertion are the most commonly performed, are seen as important generic skills, and correspond to the total number of procedures for which confidence can be maintained. Key determinants of confidence are gender, number of procedures performed in the previous year and total number of procedures performed. Conclusion The highest volume of service requirement is for six procedures. The procedural confidence is dependent upon gender, number of procedures performed in the previous year and total number of procedures performed. This has implications for those designing the training curriculum and with regards the move to shorten the duration of training.

Review of Pre-Analytical Errors in Oral Glucose Tolerance Testing in a Tertiary Care Hospital.

Science.gov (United States)

Nanda, Rachita; Patel, Suprava; Sahoo, Sibashish; Mohapatra, Eli

2018-03-13

The pre-pre-analytical and pre-analytical phases form a major chunk of the errors in a laboratory. The process has taken into consideration a very common procedure which is the oral glucose tolerance test to identify the pre-pre-analytical errors. Quality indicators provide evidence of quality, support accountability and help in the decision making of laboratory personnel. The aim of this research is to evaluate pre-analytical performance of the oral glucose tolerance test procedure. An observational study that was conducted overa period of three months, in the phlebotomy and accessioning unit of our laboratory using questionnaire that examined the pre-pre-analytical errors through a scoring system. The pre-analytical phase was analyzed for each sample collected as per seven quality indicators. About 25% of the population gave wrong answer with regard to the question that tested the knowledge of patient preparation. The appropriateness of test result QI-1 had the most error. Although QI-5 for sample collection had a low error rate, it is a very important indicator as any wrongly collected sample can alter the test result. Evaluating the pre-analytical and pre-pre-analytical phase is essential and must be conducted routinely on a yearly basis to identify errors and take corrective action and to facilitate their gradual introduction into routine practice.

United States Nuclear Regulatory Commission Staff Practice and Procedure Digest

International Nuclear Information System (INIS)

1992-08-01

This 2nd revision of the sixth edition of the NRC Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period of July 1, 1972 to September 30, 1991, interpreting the NRC's Rules of Pratice in 10 CFR Part 2

The Case for Adopting Server-side Analytics

Science.gov (United States)

Tino, C.; Holmes, C. P.; Feigelson, E.; Hurlburt, N. E.

2017-12-01

The standard method for accessing Earth and space science data relies on a scheme developed decades ago: data residing in one or many data stores must be parsed out and shipped via internet lines or physical transport to the researcher who in turn locally stores the data for analysis. The analyses tasks are varied and include visualization, parameterization, and comparison with or assimilation into physics models. In many cases this process is inefficient and unwieldy as the data sets become larger and demands on the analysis tasks become more sophisticated and complex. For about a decade, several groups have explored a new paradigm to this model. The names applied to the paradigm include "data analytics", "climate analytics", and "server-side analytics". The general concept is that in close network proximity to the data store there will be a tailored processing capability appropriate to the type and use of the data served. The user of the server-side analytics will operate on the data with numerical procedures. The procedures can be accessed via canned code, a scripting processor, or an analysis package such as Matlab, IDL or R. Results of the analytics processes will then be relayed via the internet to the user. In practice, these results will be at a much lower volume, easier to transport to and store locally by the user and easier for the user to interoperate with data sets from other remote data stores. The user can also iterate on the processing call to tailor the results as needed. A major component of server-side analytics could be to provide sets of tailored results to end users in order to eliminate the repetitive preconditioning that is both often required with these data sets and which drives much of the throughput challenges. NASA's Big Data Task Force studied this issue. This paper will present the results of this study including examples of SSAs that are being developed and demonstrated and suggestions for architectures that might be developed for

Green analytical chemistry introduction to chloropropanols determination at no economic and analytical performance costs?

Science.gov (United States)

Jędrkiewicz, Renata; Orłowski, Aleksander; Namieśnik, Jacek; Tobiszewski, Marek

2016-01-15

In this study we perform ranking of analytical procedures for 3-monochloropropane-1,2-diol determination in soy sauces by PROMETHEE method. Multicriteria decision analysis was performed for three different scenarios - metrological, economic and environmental, by application of different weights to decision making criteria. All three scenarios indicate capillary electrophoresis-based procedure as the most preferable. Apart from that the details of ranking results differ for these three scenarios. The second run of rankings was done for scenarios that include metrological, economic and environmental criteria only, neglecting others. These results show that green analytical chemistry-based selection correlates with economic, while there is no correlation with metrological ones. This is an implication that green analytical chemistry can be brought into laboratories without analytical performance costs and it is even supported by economic reasons. Copyright © 2015 Elsevier B.V. All rights reserved.

Procedural skills practice and training needs of doctors, nurses, midwives and paramedics in rural Victoria

Science.gov (United States)

Campbell, David; Shepherd, Irwyn; McGrail, Matthew; Kassell, Lisa; Connolly, Marnie; Williams, Brett; Nestel, Debra

2015-01-01

Introduction Procedural skills are a significant component of clinical practice. Doctors, nurses, midwives and paramedics are trained to use a variety of procedural skills. Rural clinicians in particular are often required to maintain competence in some procedural skills that are used infrequently, and which may require regular and repeated rehearsal. This paper reports on a research project conducted in Gippsland, Victoria, to ascertain the frequency of use, and relevance to clinical practice, of a range of skills in the fields of medicine, nursing, midwifery, and paramedic practice. The project also gathered data on the attitudes of clinicians regarding how frequently and by what means they thought they needed to practice these skills with a particular focus on the use of simulation as an educational method. Methods The research was conducted following identification of a specific set of procedural skills for each professional group. Skills were identified by an expert steering committee. We developed online questionnaires that consisted of two parts: 1) demographic and professional characteristics, and 2) experience of procedural skills and perceived training needs. We sought to invite all practicing clinicians (doctors, nurses, midwives, paramedics) working in Gippsland. Online surveys were distributed between November 2011 and April 2012 with three follow-up attempts. The Monash University Human Research Ethics Committee approved the study. Results Valid responses were received from 58 doctors, 94 nurses, 46 midwives, and 30 paramedics, whom we estimate to represent not more than 20% of current clinicians within these professions. This response rate reflected some of the difficulties experienced in the conduct of the research. Results were tabulated for each professional group across the range of skills. There was significant correlation between the frequency of certain skills and confidence with maintenance of these skills. This did not necessarily correlate

Procedural skills practice and training needs of doctors, nurses, midwives and paramedics in rural Victoria.

Science.gov (United States)

Campbell, David; Shepherd, Irwyn; McGrail, Matthew; Kassell, Lisa; Connolly, Marnie; Williams, Brett; Nestel, Debra

2015-01-01

Procedural skills are a significant component of clinical practice. Doctors, nurses, midwives and paramedics are trained to use a variety of procedural skills. Rural clinicians in particular are often required to maintain competence in some procedural skills that are used infrequently, and which may require regular and repeated rehearsal. This paper reports on a research project conducted in Gippsland, Victoria, to ascertain the frequency of use, and relevance to clinical practice, of a range of skills in the fields of medicine, nursing, midwifery, and paramedic practice. The project also gathered data on the attitudes of clinicians regarding how frequently and by what means they thought they needed to practice these skills with a particular focus on the use of simulation as an educational method. The research was conducted following identification of a specific set of procedural skills for each professional group. Skills were identified by an expert steering committee. We developed online questionnaires that consisted of two parts: 1) demographic and professional characteristics, and 2) experience of procedural skills and perceived training needs. We sought to invite all practicing clinicians (doctors, nurses, midwives, paramedics) working in Gippsland. Online surveys were distributed between November 2011 and April 2012 with three follow-up attempts. The Monash University Human Research Ethics Committee approved the study. Valid responses were received from 58 doctors, 94 nurses, 46 midwives, and 30 paramedics, whom we estimate to represent not more than 20% of current clinicians within these professions. This response rate reflected some of the difficulties experienced in the conduct of the research. Results were tabulated for each professional group across the range of skills. There was significant correlation between the frequency of certain skills and confidence with maintenance of these skills. This did not necessarily correlate with perceptions of

The contribution of analytical detection methods to the enforcement of good irradiation practice

International Nuclear Information System (INIS)

Ehlermann, D.A.E.

1996-01-01

Good Manufacturing Practice (GMP) is a generally accepted principle combining several features in order to achieve the optimal quality. In other words, GMP is observed if every possible measure is taken to contribute to the best possible quality of the end product. In this sense, Good Irradiation Practice (GIP) may be understood as one of the many elements of GMP dealing especially with aspects of processing food using ionising radiation. On the contrary the operator of an irradiation facility may consider GIP as the central idea including that GMP - in this case excluding the radiation aspects - is observed in addition to GIP standards. Regardless of this theoretical dispute, it is obvious that food irradiation requires classical GMP to be applied without exception and that good practice is also applied in radiation processing. The main interest in analytical methods for the identification of radiation processed food arose from the need to enforce the ban on this process, to verify correct labelling, or to ensure that it is used only for the very limited number of application which are permitted. In this field, identification methods already introduced into the official food inspection systems have contributed considerably towards making evident several cases of the fraudulent application of radiation processing. At present, as radiation processing of food is becoming more and more accepted, the number of national clearances is increasing and the European Community is preparing for a Directive to harmonise the food laws of the member states with regard to food irradiation. Therefore, it should be considered how the analytical detection methods which have been developed could contribute to enforcing good manufacturing practices, once the main goal ceases to be the suppression of this process. (author)

EML procedures manual

International Nuclear Information System (INIS)

Volchok, H.L.; de Planque, G.

1982-01-01

This manual contains the procedures that are used currently by the Environmental Measurements Laboratory of the US Department of Energy. In addition a number of analytical methods from other laboratories have been included. These were tested for reliability at the Battelle, Pacific Northwest Laboratory under contract with the Division of Biomedical and Environmental Research of the AEC. These methods are clearly distinguished. The manual is prepared in loose leaf form to facilitate revision of the procedures and inclusion of additional procedures or data sheets. Anyone receiving the manual through EML should receive this additional material automatically. The contents are as follows: (1) general; (2) sampling; (3) field measurements; (4) general analytical chemistry; (5) chemical procedures; (6) data section; (7) specifications

A column exchange chromatographic procedure for the automated purification of analytical samples in nuclear spent fuel reprocessing and plutonium fuel fabrication

International Nuclear Information System (INIS)

Zahradnik, P.; Swietly, H.; Doubek, N.; Bagliano, G.

1992-11-01

A Column Exchange Chromatographic procedure using Tri-n-Octyl-Phosphine-Oxide (TOPO) as stationary phase, is in routine use at SAL since 1984 on nuclear spent fuel reprocessing and on Pu product samples, prior to alpha and mass spectrometric analysis. This standard procedure was further on modified in view of its automation in a glove box; the resulting new procedure is described in this paper. Laboratory Robot Compatible (LRC) disposable columns were selected because their dimensions are particularly favorable and reproducible. A less corrosive HNO 3 -HI mixture substituted the former HC1-HI plutonium eluant. The inorganic support of the stationary phase used to test the above mentioned changes was unexpectedly withdrawn from the market so that another support had to be selected and the procedure reoptimized accordingly. The resulting procedure was tested with the robot and validated against the manual procedure taken as reference: the comparison showed that the modified procedure meets the analytical requirements and has the same performance than the original procedure. (author). Refs, figs and tabs

Role of modern analytical techniques in the production of uranium metal

International Nuclear Information System (INIS)

Hareendran, K.N.; Roy, S.B.

2009-01-01

Production of nuclear grade uranium metal conforming to its stringent specification with respect to metallic and non metallic impurities necessitates implementation of a comprehensive quality control regime. Founding members of Uranium Metal Plant realised the importance of this aspect of metal production and a quality control laboratory was set up as part of the production plant. In the initial stages of its existence, the laboratory mainly catered to the process control analysis of the plant process samples and Spectroscopy Division and Analytical Division of BARC provided analysis of trace metallic impurities in the intermediates as well as in the product uranium metal. This laboratory also provided invaluable R and D support for the optimization of the process involving both calciothermy and magnesiothermy. Prior to 1985, analytical procedures used were limited to classical methods of analysis with minimal instrumental procedures. The first major analytical instrument, a Flame AAS was installed in 1985 and a beginning to the trace analysis was made. However during the last 15 years the Quality Control Section has modernized the analytical set up by acquiring appropriate instruments. Presently the facility has implemented a complete quality control and quality assurance program required to cover all aspects of uranium metal production viz analysis of raw materials, process samples, waste disposal samples and also determination of all the specification elements in uranium metal. The current analytical practices followed in QCS are presented here

Th-U-Pb{sub T} dating by electron probe microanalysis, Part I. Monazite: analytical procedures and data treatment

Energy Technology Data Exchange (ETDEWEB)

Vlach, Silvio Roberto Farias [Universidade de Sao Paulo (USP), Sao Carlos, SP (Brazil). Inst. de Geociencias. Dept. de Mineralogia e Geotectonica], e-mail: srfvlach@usp.br

2010-03-15

Dating methodology by the electron probe microanalyser (EPMA) of (Th, U)-bearing minerals, highlighting monazite, acquired greater than ever importance in literature, particularly due to its superior spatial resolution, as well as versatility, which allow correlating petrological processes at times registered only in micro-scales in minerals and rocks with absolute ages. Although the accuracy is inferior to the one achieved with conventional isotopic methods in up to an order of magnitude, EPMA is the instrument that allows the best spatial resolution, reaching a few {mu}m{sup 3} in some conditions. Quantification of minor and trace elements with suitable precision and accuracy involves the own instrumental and analytical set-ups and data treatment strategies, significantly more rigorous when compared with those applied in conventional analyses. Th-U-Pb{sub T} dating is an example of these cases. Each EPMA is a unique machine as for its instrumental characteristics and respective automation system. In such a way, analytical procedures ought to be adjusted for laboratory specific cities. The analytical strategies and data treatment adopted in the Electronic Microprobe Laboratory from Instituto de Geociencias of Universidade de Sao Paulo, Brazil, with a JEOL JXA8600S EPMA, and a ThermoNoran-Voyager 4.3 automation system, are presented and compared with the ones used in other laboratories. The influence of instrumental factors and spectral overlaps on Th, U, and Pb quantification is discussed. Applied procedures to interference correction, error propagation, data treatment, and final chemical age presentation as well as to sampling and analyses are emphasized. Some typical applications are discussed, drawing attention to the most relevant aspects of electron microprobe dating. (author)

Analytical Chemistry Laboratory (ACL) procedure compendium

International Nuclear Information System (INIS)

1993-01-01

This volume contains the interim change notice for the safety operation procedure for hot cell. It covers the master-slave manipulators, dry waste removal, cell transfers, hoists, cask handling, liquid waste system, and physical characterization of fluids

Insight, working through, and practice: the role of procedural knowledge.

Science.gov (United States)

Rosenblatt, Allan

2004-01-01

A conception of insight is proposed, based on a systems and information-processing framework and using current neuroscience concepts, as an integration of information that results in a new symbolization of experience with a significant change in self-image and a transformation of non-declarative procedural knowledge into declarative knowledge. Since procedural memory and knowledge, seen to include emotional and relationship issues, is slow to change, durable emotional and behavioral change often requires repeated practice, a need not explicitly addressed in standard psychoanalytic technique. Working through is thus seen as also encompassing nondynamic factors. The application of these ideas to therapeutic technique suggests possible therapeutic interventions beyond interpretation. An illustrative clinical vignette is presented.

Analytical procedure for characterization of medieval wall-paintings by X-ray fluorescence spectrometry, laser ablation inductively coupled plasma mass spectrometry and Raman spectroscopy

International Nuclear Information System (INIS)

Syta, Olga; Rozum, Karol; Choińska, Marta; Zielińska, Dobrochna; Żukowska, Grażyna Zofia; Kijowska, Agnieszka; Wagner, Barbara

2014-01-01

Analytical procedure for the comprehensive chemical characterization of samples from medieval Nubian wall-paintings by means of portable X-ray fluorescence (pXRF), laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) and Raman spectroscopy (RS) was proposed in this work. The procedure was used for elemental and molecular investigations of samples from archeological excavations in Nubia (modern southern Egypt and northern Sudan). Numerous remains of churches with painted decorations dated back to the 7th–14th century were excavated in the region of medieval kingdoms of Nubia but many aspects of this art and its technology are still unknown. Samples from the selected archeological sites (Faras, Old Dongola and Banganarti) were analyzed in the form of transfers (n = 26), small fragments collected during the excavations (n = 35) and cross sections (n = 15). XRF was used to collect data about elemental composition, LA-ICPMS allowed mapping of selected elements, while RS was used to get the molecular information about the samples. The preliminary results indicated the usefulness of the proposed analytical procedure for distinguishing the substances, from both the surface and sub-surface domains of the wall-paintings. The possibility to identify raw materials from the wall-paintings will be used in the further systematic, archeometric studies devoted to the detailed comparison of various historic Nubian centers. - Highlights: • The analytical procedure for examination of unique wall paintings was proposed. • Identification of pigments and supporting layers of wall-paintings was obtained. • Heterogeneous samples were mapped with the use of LA-ICPMS. • Anatase in the sub-surface regions of samples was detected by Raman spectroscopy

Analytical procedure for characterization of medieval wall-paintings by X-ray fluorescence spectrometry, laser ablation inductively coupled plasma mass spectrometry and Raman spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Syta, Olga; Rozum, Karol; Choińska, Marta [Faculty of Chemistry, University of Warsaw, Pasteura 1, 02-093 Warsaw (Poland); Zielińska, Dobrochna [Institute of Archaeology, University of Warsaw, Krakowskie Przedmieście 26/28, 00-927 Warsaw (Poland); Żukowska, Grażyna Zofia [Chemical Faculty, Warsaw University of Technology, Noakowskiego 3, 00-664 Warsaw (Poland); Kijowska, Agnieszka [National Museum in Warsaw, Aleje Jerozolimskie 3, 00-495 Warsaw (Poland); Wagner, Barbara, E-mail: barbog@chem.uw.edu.pl [Faculty of Chemistry, University of Warsaw, Pasteura 1, 02-093 Warsaw (Poland)

2014-11-01

Analytical procedure for the comprehensive chemical characterization of samples from medieval Nubian wall-paintings by means of portable X-ray fluorescence (pXRF), laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) and Raman spectroscopy (RS) was proposed in this work. The procedure was used for elemental and molecular investigations of samples from archeological excavations in Nubia (modern southern Egypt and northern Sudan). Numerous remains of churches with painted decorations dated back to the 7th–14th century were excavated in the region of medieval kingdoms of Nubia but many aspects of this art and its technology are still unknown. Samples from the selected archeological sites (Faras, Old Dongola and Banganarti) were analyzed in the form of transfers (n = 26), small fragments collected during the excavations (n = 35) and cross sections (n = 15). XRF was used to collect data about elemental composition, LA-ICPMS allowed mapping of selected elements, while RS was used to get the molecular information about the samples. The preliminary results indicated the usefulness of the proposed analytical procedure for distinguishing the substances, from both the surface and sub-surface domains of the wall-paintings. The possibility to identify raw materials from the wall-paintings will be used in the further systematic, archeometric studies devoted to the detailed comparison of various historic Nubian centers. - Highlights: • The analytical procedure for examination of unique wall paintings was proposed. • Identification of pigments and supporting layers of wall-paintings was obtained. • Heterogeneous samples were mapped with the use of LA-ICPMS. • Anatase in the sub-surface regions of samples was detected by Raman spectroscopy.

The Expanding Role of Advanced Practice Providers in Urologic Procedural Care.

Science.gov (United States)

Langston, Joshua P; Duszak, Richard; Orcutt, Venetia L; Schultz, Heather; Hornberger, Brad; Jenkins, Lawrence C; Hemingway, Jennifer; Hughes, Danny R; Pruthi, Raj S; Nielsen, Matthew E

2017-08-01

To understand the role of Advanced Practice Providers (APPs) in urologic procedural care and its change over time. As the population ages and the urologic workforce struggles to meet patient access demands, the role of APPs in the provision of all aspects of urologic care is increasing. However, little is currently known about their role in procedural care. Commonly performed urologic procedures were linked to Current Procedural Terminology (CPT) codes from 1994 to 2012. National Medicare Part B beneficiary claims frequency was identified using Physician Supplier Procedure Summary Master Files. Trends were studied for APPs, urologists, and all other providers nationally across numerous procedures spanning complexity, acuity, and technical skill set requirements. Between 1994 and 2012, annual Medicare claims for urologic procedures by APPs increased dramatically. Cystoscopy increased from 24 to 1820 (+7483%), transrectal prostate biopsy from 17 to 834 (+4806%), complex Foley catheter placement from 471 to 2929 (+522%), urodynamics testing from 41 to 9358 (+22,727%), and renal ultrasound from 18 to 4500 (+24,900%) CONCLUSION: We found dramatic growth in the provision of urologic procedural care by APPs over the past 2 decades. These data reinforce the known expansion of the APP role in urology and support the timeliness of ongoing collaborative multidisciplinary educational efforts to address unmet needs in education, training, and guideline formation to maximize access to urologic procedural services. Copyright © 2017 Elsevier Inc. All rights reserved.

Background Contamination by Coplanar Polychlorinated Biphenyls (PCBS) in Trace Level High Resolution Gas Chromatography/High Resolution Mass Spectrometry (HRGC/HRMS) Analytical Procedures

Science.gov (United States)

The addition of the "dioxin-like" polychlorinated biphenyl (PCB) congeners to the assessment of risk associated with the 2,3,7,8-chlorine substituted dioxins and furans has dramatically increased the number of laboratories worldwide that are developing analytical procedures for t...

Analytical electromagnetic calculations for practical superconductors

International Nuclear Information System (INIS)

Tominaka, T

2008-01-01

The current distributions of twisted long filamentary composites are studied during the current sweep and under the transverse and longitudinal external field, using the inductance matrix among superconducting helical filaments and the inductive voltage between filaments and the external coil in the circuit equation. The self- and mutual inductances of helical conductors with a uniform helical current density are approximately calculated from the analytical expressions of long helical thin conductors. In addition, the magnetic field and the vector potential distributions of a twisted superconducting composite are also obtained by the numerical integral calculation over the cross section of the analytical expressions for the magnetic field and vector potential due to an infinitely long helical conductor

29 CFR 1614.308 - Practices and procedures of the Special Panel.

Science.gov (United States)

2010-07-01

... Systems Protection Board, 1120 Vermont Avenue, NW., Washington, DC 20419. One copy of each submission... 29 Labor 4 2010-07-01 2010-07-01 false Practices and procedures of the Special Panel. 1614.308... Special Panel. (a) Scope. The rules in this subpart apply to proceedings before the Special Panel. (b...

Revisiting the Procedures for the Vector Data Quality Assurance in Practice

Science.gov (United States)

Erdoğan, M.; Torun, A.; Boyacı, D.

2012-07-01

of spatial data quality concepts into developments and application requires existence of conceptual, logical and most importantly physical existence of data model, rules and knowledge of realization in a form of geo-spatial data. The applicable metrics and thresholds are determined on this concrete base. This study discusses application of geo-spatial data quality issues and QA (quality assurance) and QC procedures in the topographic data production. Firstly we introduce MGCP (Multinational Geospatial Co-production Program) data profile of NATO (North Atlantic Treaty Organization) DFDD (DGIWG Feature Data Dictionary), the requirements of data owner, the view of data producers for both data capturing and QC and finally QA to fulfil user needs. Then, our practical and new approach which divides the quality into three phases is introduced. Finally, implementation of our approach to accomplish metrics, measures and thresholds of quality definitions is discussed. In this paper, especially geometry and semantics quality and quality control procedures that can be performed by the producers are discussed. Some applicable best-practices that we experienced on techniques of quality control, defining regulations that define the objectives and data production procedures are given in the final remarks. These quality control procedures should include the visual checks over the source data, captured vector data and printouts, some automatic checks that can be performed by software and some semi-automatic checks by the interaction with quality control personnel. Finally, these quality control procedures should ensure the geometric, semantic, attribution and metadata quality of vector data.

Patient and family attitudes regarding the practice of procedures on the newly deceased.

Science.gov (United States)

Manifold, C A; Storrow, A; Rodgers, K

1999-02-01

Performance of emergency lifesaving procedures is an integral part of emergency medicine resident training. To assess attitudes of ED patients regarding the practice of procedures on the newly deceased. A descriptive survey was administered to a convenience sample of ED patients and their families at two urban military Level-1 trauma centers. Subjects were asked about their overall opinions regarding the practice of nontherapeutic procedural skills on themselves or relatives immediately after death in the ED. Subgroup analysis included the issue of advanced permission and opinions regarding procedures defined by the investigators as noninvasive (e.g., laryngeal mask airway) or invasive (e.g., cricothyrotomy). Data were analyzed descriptively and with chi-square as appropriate. For comparison of proportions, a sample size of at least 140 was chosen for an alpha of 0.05 and a beta of 0.10 to detect an effect size of 0.3. Alpha was corrected for multiple comparisons prior to the study. Three hundred seventeen surveys were collected and 88% (n = 280) were complete. Seventy-five percent (n = 290) and 70% (n = 273) of the respondents agreed to after-death procedures on themselves or their relatives, respectively. However, only 40% (n = 106) and 50% (n = 131) would allow such procedures without prior permission. Seventy-one percent (n = 189) were willing to give permission in a living will, while 85% (n = 238) indicated support of a wallet card format. There was no significant difference in permission rates when contrasting individual noninvasive and invasive procedures. Most patients are willing to have procedures performed on themselves or relatives shortly after death, yet the majority request that permission be obtained in advance. A living will or carried card would be acceptable for such permission.

Developing automated analytical methods for scientific environments using LabVIEW.

Science.gov (United States)

Wagner, Christoph; Armenta, Sergio; Lendl, Bernhard

2010-01-15

The development of new analytical techniques often requires the building of specially designed devices, each requiring its own dedicated control software. Especially in the research and development phase, LabVIEW has proven to be one highly useful tool for developing this software. Yet, it is still common practice to develop individual solutions for different instruments. In contrast to this, we present here a single LabVIEW-based program that can be directly applied to various analytical tasks without having to change the program code. Driven by a set of simple script commands, it can control a whole range of instruments, from valves and pumps to full-scale spectrometers. Fluid sample (pre-)treatment and separation procedures can thus be flexibly coupled to a wide range of analytical detection methods. Here, the capabilities of the program have been demonstrated by using it for the control of both a sequential injection analysis - capillary electrophoresis (SIA-CE) system with UV detection, and an analytical setup for studying the inhibition of enzymatic reactions using a SIA system with FTIR detection.

Self-perceived versus objectively measured competence in performing clinical practical procedures by final year medical students

OpenAIRE

Katowa-Mukwato, Patricia; Banda, Sekelani

2016-01-01

Objectives To determine and compare the self-perceived and objectively measured competence in performing 14 core-clinical practical procedures by Final Year Medical Students of the University of Zambia. Methods The study included 56 out of 60 graduating University of Zambia Medical Students of the 2012/2013 academic year. Self-perceived competence: students rated their competence on 14 core- clinical practical procedures using a self-administered questionnaire on a 5-point Likert scale. Objec...

Analytical toxicology of emerging drugs of abuse--an update.

Science.gov (United States)

Meyer, Markus R; Peters, Frank T

2012-12-01

The steady increase of new drugs of abuse on the illicit drug market is a great challenge for analytical toxicologists. Because most of these new drugs or drug classes are not included in established analytical methods targeting classic drugs of abuse, analytical procedures must be adapted or new procedures must be developed to cover such new compounds. This review summarizes procedures for analysis of these drugs of abuse published from January 2009 to January 2012 covering the following classes of emerging drugs of abuse as follows: β-keto-amphetamines, pyrrolidinophenones, tryptamines, and synthetic cannabinoids.

United States Nuclear Regulatory Commission Staff Practice and Procedure Digest. Digest No. 2

International Nuclear Information System (INIS)

1978-08-01

This second edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board and Atomic Safety and Licensing Board decisions issued during the period from July 1, 1972 to March 31, 1978 interpreting the NRC's Rules of Practice in 10 CFR Part 2. This second edition replaces the first edition and its supplements and includes appropriate changes reflecting the recent amendments to the Rules of Practice which became effective on May 26, 1978

A comparison of various procedures in photon activation analysis with the same irradiation setup

Energy Technology Data Exchange (ETDEWEB)

Sun, Z.J. [Chemical Sciences and Engineering Division, Argonne National Laboratory, 9700 S. Cass Ave., Argonne, IL 60439 (United States); Wells, D. [Physics Department, South Dakota School of Mines and Technology, 501 E. Saint Joseph St., Rapid City, SD 57701 (United States); Segebade, C. [Idaho Accelerator Center, Idaho State University, 921 S. 8th Ave., Pocatello, ID 83209 (United States); Quigley, K.; Chemerisov, S. [Chemical Sciences and Engineering Division, Argonne National Laboratory, 9700 S. Cass Ave., Argonne, IL 60439 (United States)

2014-11-15

A sample of known elemental concentrations was activated in the bremsstrahlung photon beam which was created by a pulsed electron LINAC. Several procedures of photon activation analysis, including those applied with/without reference material and with/without photon flux monitor, were conducted to make a comparison of their precision and accuracy in practice. Experimental results have indicated that: (1) relative procedures usually produce better outcome despite that the absolute measurement is straightforward and eliminate the assistance of reference materials; (2) among relative procedures, the method with internal flux monitor yields higher quality of the analytical results. In the article, the pros and cons of each procedure are discussed as well.

NASA reliability preferred practices for design and test

Science.gov (United States)

1991-01-01

Given here is a manual that was produced to communicate within the aerospace community design practices that have contributed to NASA mission success. The information represents the best technical advice that NASA has to offer on reliability design and test practices. Topics covered include reliability practices, including design criteria, test procedures, and analytical techniques that have been applied to previous space flight programs; and reliability guidelines, including techniques currently applied to space flight projects, where sufficient information exists to certify that the technique will contribute to mission success.

Validation of multivariate classification methods using analytical fingerprints – concept and case study on organic feed for laying hens

NARCIS (Netherlands)

Alewijn, Martin; Voet, van der Hilko; Ruth, van Saskia

2016-01-01

Multivariate classification methods based on analytical fingerprints have found many applications in the food and feed area, but practical applications are still scarce due to a lack of a generally accepted validation procedure. This paper proposes a new approach for validation of this type of

A practical procedure to study the performance of a magnetic bearing

International Nuclear Information System (INIS)

Ahmed, Z.; Aijazi, M.K.

2003-01-01

A practical procedure that can help in recording, under simulated conditions, the performance of a magnetic bearing is presented. Theoretical background and practical method to record the vibrations in terms of frequency vs displacement. relationship are discussed. The magnetic bearing is subjected to mechanical vibrations using an electromagnetic vibrator powered with sinusoidal current. Frequency of the current is swept at constant rate through a selected band of interest. Bearing response picked up using an NCDT (Non Contact Displacement Transducer) is recorded on an X- Y recorder to assess its suitability for use in the machine. (author)

Developing a Code of Practice for Learning Analytics

Science.gov (United States)

Sclater, Niall

2016-01-01

Ethical and legal objections to learning analytics are barriers to development of the field, thus potentially denying students the benefits of predictive analytics and adaptive learning. Jisc, a charitable organization that champions the use of digital technologies in UK education and research, has attempted to address this with the development of…

Parallel between the “small reform” law procedure and the arbitration procedure. Practical influences on business environment

Directory of Open Access Journals (Sweden)

Cezar HÎNCU

2011-06-01

Full Text Available The financial blockings determined by the economical crisis in the last years bounded the business environment, through pressures on the legislature and regulations of own associative institutions (commerce chambers, to claim practical measures leading to more rapid and less expensive completion of commercial litigations. Within the period 2010-2011, these were carried out by adopting the Law 202/2010 and by the New Rules of Arbitral Procedure of International Commercial Arbitration Court of CCIR. The changes of the arbitration norms aim at the simplification of the procedure, but the essential ones – the possibility to attack with action in annulment the conclusions for arbitration adjourn or the agreement of some temporary measures leading to hastening the causes resolutions, are inapplicable, because they are not linked to rigid stipulations of the new CPC. The changes of Law 202/2010 aim at reducing the litigations resolutions (summoning procedure, term changing, causes postponing. Also, the possibility of cassation with sending to rejudgement is limited. The changes in the interest of the business environment consist of introduction the mediation, as previous procedure. The normative act specifies adjourning the prescription term during mediation, the right of the judge to fine the parties not present at mediation, after accepting it.

Sampling, storage and sample preparation procedures for X ray fluorescence analysis of environmental materials

International Nuclear Information System (INIS)

1997-06-01

X ray fluorescence (XRF) method is one of the most commonly used nuclear analytical technique because of its multielement and non-destructive character, speed, economy and ease of operation. From the point of view of quality assurance practices, sampling and sample preparation procedures are the most crucial steps in all analytical techniques, (including X ray fluorescence) applied for the analysis of heterogeneous materials. This technical document covers recent modes of the X ray fluorescence method and recent developments in sample preparation techniques for the analysis of environmental materials. Refs, figs, tabs

The medical practice of euthanasia in Belgium and The Netherlands: legal notification, control and evaluation procedures

NARCIS (Netherlands)

Smets, T.; Bilsen, J.J.; Cohen, J.; Rurup, M.L.; Keyser, E.; Deliens, L.H.J.

2009-01-01

OBJECTIVES: To describe and compare current legal procedures for notifying, controlling and evaluating (NCE-procedures) euthanasia in Belgium and the Netherlands, and to discuss the implications for a safe and controllable euthanasia practice. METHODS: We systematically studied and compared official

Observance of Sterilization Protocol Guideline Procedures of Critical Instruments for Preventing Iatrogenic Transmission of Creutzfeldt-Jakob Disease in Dental Practice in France, 2017

Directory of Open Access Journals (Sweden)

Denis Bourgeois

2018-04-01

Full Text Available Effective sterilization of reusable instruments contaminated by Creutzfeldt–Jakob disease in dental care is a crucial issue for public health. The present cross-sectional study investigated how the recommended procedures for sterilization were implemented by French dental practices in real-world settings. A sample of dental practices was selected in the French Rhône-Alpes region. Data were collected by a self-questionnaire in 2016. Sterilization procedures (n = 33 were classified into 4 groups: (1 Pre-sterilization cleaning of reusable instruments; (2 Biological verification of sterilization cycles—Monitoring steam sterilization procedures; (3 Autoclave performance and practitioner knowledge of autoclave use; (4 Monitoring and documentation of sterilization procedures—Tracking and tracing the instrumentation. Answers were provided per procedure, along with the global implementation of procedures within a group (over 80% correctly performed. Then it was verified how adherence to procedure groups varied with the size of the dental practice and the proportion of dental assistants within the team. Among the 179 questionnaires available for the analyses, adherence to the recommended procedures of sterilization noticeably varied between practices, from 20.7% to 82.6%. The median percentages of procedures correctly implemented per practice were 58.1%, 50.9%, 69.2% and 58.2%, in Groups 1, 2, 3 and 4, respectively (corresponding percentages for performing over 80% of the procedures in the group: 23.4%, 6.6%, 46.6% and 38.6%. Dental practices ≥ 3 dental units performed significantly better (>80% procedures of Groups 2 and 4 (p = 0.01 and p = 0.002, respectively, while no other significant associations emerged. As a rule, practices complied poorly with the recommended procedures, despite partially improved results in bigger practices. Specific training regarding sterilization procedures and a better understanding of the reasons leading to their

Group Analytic Psychotherapy in Brazil.

Science.gov (United States)

Penna, Carla; Castanho, Pablo

2015-10-01

Group analytic practice in Brazil began quite early. Highly influenced by the Argentinean Pichon-Rivière, it enjoyed a major development from the 1950s to the early 1980s. Beginning in the 1970s, different factors undermined its development and eventually led to its steep decline. From the mid 1980s on, the number of people looking for either group analytic psychotherapy or group analytic training decreased considerably. Group analytic psychotherapy societies struggled to survive and most of them had to close their doors in the 1990s and the following decade. Psychiatric reform and the new public health system have stimulated a new demand for groups in Brazil. Developments in the public and not-for-profit sectors, combined with theoretical and practical research in universities, present promising new perspectives for group analytic psychotherapy in Brazil nowadays.

Issuing and Responding to Unusual Questions: A Conversation Analytic Account of Tom Andersen's Therapeutic Practice.

Science.gov (United States)

Smoliak, Olga; Le Couteur, Amanda; Quinn-Nilas, Christopher

2018-03-08

Tom Andersen is considered one of the key contributors to the development of postmodern practice. Little is known, however, about the ways in which his ideas and practices are routinely carried out in situ. We used Conversation Analysis (CA) to investigate a session of couple therapy facilitated by Andersen. We show how Andersen and client participants oriented to and addressed problems of understanding that occurred between them. The source of this trouble was Andersen's use of unusual question formulations. We offer preliminary evidence that such unusual formulations served particular interactional and institutional (i.e., therapeutic) functions in their local contexts of use. We conclude by considering some implications of this analysis-and of conversation analytic inquiry more generally-for the practice of family therapy. © 2018 American Association for Marriage and Family Therapy.

Limitless Analytic Elements

Science.gov (United States)

Strack, O. D. L.

2018-02-01

We present equations for new limitless analytic line elements. These elements possess a virtually unlimited number of degrees of freedom. We apply these new limitless analytic elements to head-specified boundaries and to problems with inhomogeneities in hydraulic conductivity. Applications of these new analytic elements to practical problems involving head-specified boundaries require the solution of a very large number of equations. To make the new elements useful in practice, an efficient iterative scheme is required. We present an improved version of the scheme presented by Bandilla et al. (2007), based on the application of Cauchy integrals. The limitless analytic elements are useful when modeling strings of elements, rivers for example, where local conditions are difficult to model, e.g., when a well is close to a river. The solution of such problems is facilitated by increasing the order of the elements to obtain a good solution. This makes it unnecessary to resort to dividing the element in question into many smaller elements to obtain a satisfactory solution.

Standard guide for establishing a quality assurance program for analytical chemistry laboratories within the nuclear industry

CERN Document Server

American Society for Testing and Materials. Philadelphia

2006-01-01

1.1 This guide covers the establishment of a quality assurance (QA) program for analytical chemistry laboratories within the nuclear industry. Reference to key elements of ANSI/ISO/ASQC Q9001, Quality Systems, provides guidance to the functional aspects of analytical laboratory operation. When implemented as recommended, the practices presented in this guide will provide a comprehensive QA program for the laboratory. The practices are grouped by functions, which constitute the basic elements of a laboratory QA program. 1.2 The essential, basic elements of a laboratory QA program appear in the following order: Section Organization 5 Quality Assurance Program 6 Training and Qualification 7 Procedures 8 Laboratory Records 9 Control of Records 10 Control of Procurement 11 Control of Measuring Equipment and Materials 12 Control of Measurements 13 Deficiencies and Corrective Actions 14

Practices and Procedures in the Administration of ITV Distance Learning Programs at Selected Institutions in Higher Education.

Science.gov (United States)

Koontz, F. R.

The purpose of this study was to obtain current data on practices and procedures in the administration of distance learning programs in the areas of: (1) needs assessment; (2) student demographics; (3) telecourse acquisition procedures and sources; (4) criteria used to evaluate credit telecourses; (5) institutional approval procedures; (6)…

Irregular analytical errors in diagnostic testing - a novel concept.

Science.gov (United States)

Vogeser, Michael; Seger, Christoph

2018-02-23

In laboratory medicine, routine periodic analyses for internal and external quality control measurements interpreted by statistical methods are mandatory for batch clearance. Data analysis of these process-oriented measurements allows for insight into random analytical variation and systematic calibration bias over time. However, in such a setting, any individual sample is not under individual quality control. The quality control measurements act only at the batch level. Quantitative or qualitative data derived for many effects and interferences associated with an individual diagnostic sample can compromise any analyte. It is obvious that a process for a quality-control-sample-based approach of quality assurance is not sensitive to such errors. To address the potential causes and nature of such analytical interference in individual samples more systematically, we suggest the introduction of a new term called the irregular (individual) analytical error. Practically, this term can be applied in any analytical assay that is traceable to a reference measurement system. For an individual sample an irregular analytical error is defined as an inaccuracy (which is the deviation from a reference measurement procedure result) of a test result that is so high it cannot be explained by measurement uncertainty of the utilized routine assay operating within the accepted limitations of the associated process quality control measurements. The deviation can be defined as the linear combination of the process measurement uncertainty and the method bias for the reference measurement system. Such errors should be coined irregular analytical errors of the individual sample. The measurement result is compromised either by an irregular effect associated with the individual composition (matrix) of the sample or an individual single sample associated processing error in the analytical process. Currently, the availability of reference measurement procedures is still highly limited, but LC

77 FR 70466 - Meeting of the Judicial Conference Committee on Rules of Practice and Procedure

Science.gov (United States)

2012-11-26

... Procedure. ACTION: Notice of open meeting. SUMMARY: The Committee on Rules of Practice and Procedure will hold a two-day meeting. The meeting will be open to public observation but not participation. DATE: January 3-4, 2013. TIME: 8:30 a.m. to 5:00 p.m. ADDRESSES: The Charles Hotel, Harvard Square, One Bennett...

Measuring Parenting Practices among Parents of Elementary School-Age Youth

Science.gov (United States)

Randolph, Karen A.; Radey, Melissa

2011-01-01

Objectives: The objective of this study is to establish the factor structure of the Alabama Parenting Questionnaire (APQ), an instrument designed to measure parenting practices among parents of elementary school children. Methods: Exploratory (EFA) and confirmatory factor analytic (CFA) procedures are used to validate the APQ with 790 parents of…

United States Nuclear Regulatory Commission Staff Practice and Procedure Digest

International Nuclear Information System (INIS)

1980-02-01

This first supplement to the second edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board and Atomic Safety and Licensing Board decisions issued during the period from April 1, 1978 to September 30, 1978 interpreting the NRC's Rules of Practice in 10 CFR Part 2. The supplement also includes additional material from adjudicatory decisions rendered prior to April 1, 1978 and, to a very limited degree, material from adjudicatory decisions and regulation changes after September 30, 1978. The supplement, which is intended to be used as a pocket-part supplement to the Digest itself, includes a number of new subsections and topics not covered in the Digest. The new subsections are noted in the index for the supplement

Different Analytical Procedures for the Study of Organic Residues in Archeological Ceramic Samples with the Use of Gas Chromatography-mass Spectrometry.

Science.gov (United States)

Kałużna-Czaplińska, Joanna; Rosiak, Angelina; Kwapińska, Marzena; Kwapiński, Witold

2016-01-01

The analysis of the composition of organic residues present in pottery is an important source of information for historians and archeologists. Chemical characterization of the materials provides information on diets, habits, technologies, and original use of the vessels. This review presents the problem of analytical studies of archeological materials with a special emphasis on organic residues. Current methods used in the determination of different organic compounds in archeological ceramics are presented. Particular attention is paid to the procedures of analysis of archeological ceramic samples used before gas chromatography-mass spectrometry. Advantages and disadvantages of different extraction methods and application of proper quality assurance/quality control procedures are discussed.

Mutilating Procedures, Management Practices, and Housing Conditions That May Affect the Welfare of Farm Animals: Implications for Welfare Research.

Science.gov (United States)

Nordquist, Rebecca E; van der Staay, Franz Josef; van Eerdenburg, Frank J C M; Velkers, Francisca C; Fijn, Lisa; Arndt, Saskia S

2017-02-21

A number of mutilating procedures, such as dehorning in cattle and goats and beak trimming in laying hens, are common in farm animal husbandry systems in an attempt to prevent or solve problems, such as injuries from horns or feather pecking. These procedures and other practices, such as early maternal separation, overcrowding, and barren housing conditions, raise concerns about animal welfare. Efforts to ensure or improve animal welfare involve adapting the animal to its environment, i.e., by selective breeding (e.g., by selecting "robust" animals) adapting the environment to the animal (e.g., by developing social housing systems in which aggressive encounters are reduced to a minimum), or both. We propose adapting the environment to the animals by improving management practices and housing conditions, and by abandoning mutilating procedures. This approach requires the active involvement of all stakeholders: veterinarians and animal scientists, the industrial farming sector, the food processing and supply chain, and consumers of animal-derived products. Although scientific evidence about the welfare effects of current practices in farming such as mutilating procedures, management practices, and housing conditions is steadily growing, the gain in knowledge needs a boost through more scientific research. Considering the huge number of animals whose welfare is affected, all possible effort must be made to improve their welfare as quickly as possible in order to ban welfare-compromising procedures and practices as soon as possible.

Analytical aids in land management planning

Science.gov (United States)

David R. Betters

1978-01-01

Quantitative techniques may be applied to aid in completing various phases of land management planning. Analytical procedures which have been used include a procedure for public involvement, PUBLIC; a matrix information generator, MAGE5; an allocation procedure, linear programming (LP); and an input-output economic analysis (EA). These techniques have proven useful in...

Foundations of predictive analytics

CERN Document Server

Wu, James

2012-01-01

Drawing on the authors' two decades of experience in applied modeling and data mining, Foundations of Predictive Analytics presents the fundamental background required for analyzing data and building models for many practical applications, such as consumer behavior modeling, risk and marketing analytics, and other areas. It also discusses a variety of practical topics that are frequently missing from similar texts. The book begins with the statistical and linear algebra/matrix foundation of modeling methods, from distributions to cumulant and copula functions to Cornish--Fisher expansion and o

License to evaluate: Preparing learning analytics dashboards for educational practice

NARCIS (Netherlands)

Jivet, Ioana; Scheffel, Maren; Specht, Marcus; Drachsler, Hendrik

2018-01-01

Learning analytics can bridge the gap between learning sciences and data analytics, leveraging the expertise of both fields in exploring the vast amount of data generated in online learning environments. A typical learning analytics intervention is the learning dashboard, a visualisation tool built

Framework for pedagogical learning analytics

OpenAIRE

Heilala, Ville

2018-01-01

Learning analytics is an emergent technological practice and a multidisciplinary scientific discipline, which goal is to facilitate effective learning and knowledge of learning. In this design science research, I combine knowledge discovery process, a concept of pedagogical knowledge, ethics of learning analytics and microservice architecture. The result is a framework for pedagogical learning analytics. The framework is applied and evaluated in the context of agency analytics. The framework ...

Establishing the analytical procedure for acetate in water by ion chromatography method

International Nuclear Information System (INIS)

Nguyen Thi Hong Thinh; Ha Lan Anh; Vo Thi Anh

2015-01-01

In recent studies of contamination sources of arsenic, ammonium, iron, organic carbon in groundwater, acetate is measured a lot because it is the main decomposition product of organic compounds from sediment into groundwater. In order to better support for the study of the origin and mobilization mechanism of the pollutants, acetate was studied analysis method in Isotopes Hydrology Laboratory using ion chromatography technique. Project Researchers used Ion Chromatography system - DX-600 including IonPac ICE-AS1 column for separating acetate and conductivity detector CD 25 to quantify acetate in water samples. The study results showed that project team has successfully developed analytical procedures of acetate in water with acetate’s retention time is 12 minutes, limit of detection (LOD) of the method was 0.01 ppm. The accuracy of the method was established by calculating the precision and bias of 10 analysis times of a standard sample at content levels 1 ppm and 8 ppm. The results of the 10 measurements are satisfiable about precision and bias with repeated standard deviation coefficient CVR were 1.3% and 0.2% and the recoveries R were 99.92% and 101.72%. (author)

Fatigue crack extension in nozzle junctions; comparison of analytical approximations with experimental data

International Nuclear Information System (INIS)

Broekhoven, M.J.G.; Ruijtenbeek, M.G. van de

1975-01-01

The fracture mechanics based stress intensity factor (K-factor) concept has obtained wide-spread acceptance as a tool for quantitative analysis of both fatigue crack growth and instable fracture. The present study discusses the applicability of various simple analytical approximations by comparing results with experimental data. A semi-analytical procedure has been developed whose main characteristics are: the true stress distribution perpendicular to the crack plane for the uncracked structure is used as input data; an extended version of the Shah and Kobayashi solution for elliptical cracks, loaded on their surfaces by tractions described by fourth order double symmetrical polynomials fit through the data of previous step is used to calculate full K-factor variations along the crack fronts; several corrections, a.o. to correct for free surfaces and for a corner radius are incorporated. The experiments concern careful monitoring crack growth rates (da/dN) under uniaxial fatigue loading of precracked nozzle-on-plate models, a.o. using a closed T.V. circuit. Resulting da/dN versus crack length (a) curves are converted into K versus a curves using da/dN versus ΔK curves for the same material (ASTM A 508 C12) obtained by standard procedures. Comparison of theoretical and experimental data yields the conclusion that: simple analytical approximations as sometimes recommended in literature may largely overestimate or underestimate K-factors for nozzle corner cracks; a computer program based on the semi-analytical procedure yields results within seconds of CPU-time once the input data have been generated. These results compare well with experimental and available finite element data for the range of crack depths of practical concern

AN ANALYTICAL STUDY OF EFFICACY OF CORNEAL COLLAGEN CROSSLINKING C3R PROCEDURE IN PROGRESSIVE KERATOCONUS PATIENTS

Directory of Open Access Journals (Sweden)

Rajasekar K

2017-10-01

Full Text Available BACKGROUND Keratoconus affects a significant number of the general population with conical weakened protruded area from the cornea due to weakening of the corneal stroma by a genetically premeditated preponderance. We see keratoconus as a standalone disease or accompanying other syndrome manifestations in patients. Mainly, the inferotemporal cornea is affected and the conical protrusion causes profound high irregular myopic astigmatism as a refractive error, which is very difficult to correct in progressed advanced stages. Especially in economically productive age group patients, the poor vision becomes very difficult to live with. Corneal collagen crosslinking procedure is a novel tool in the armamentarium of treatment procedures against this malady. MATERIALS AND METHODS This analytical study was conducted at cornea services, Regional Institute of Ophthalmology and Government Ophthalmic Hospital, Chennai, for a period of 14 months. Forty five eyes of forty patients with early progressive keratoconus who presented to cornea services were subjected to riboflavin UVA collagen crosslinking procedures using a standard protocol after getting an informed consent. Further response to treatment were assessed in the follow up period. RESULTS Out of 40 patients in our series, 23 were males and 17 were females. The maximum patients in our series were in the age group between 10 to 25 yrs. Epi-off procedure was done in 31 eyes and epi-on procedure was done in 14 eyes. The patients with pachymetry 400-450 microns underwent epi-on procedure and more than 450 microns underwent epi-off C3R procedure. The K values in our series were between 49D to maximum 63D. The topographic flattening was seen in 52% in epi-on and epi-off procedures. Vision improvement in our series was 57% following epi-on and 65% following epi-off procedures. CONCLUSION C3R is a very promising therapeutic modality that may halt the progression of ectatic process. It is a less invasive mode

Quality Indicators for Learning Analytics

Science.gov (United States)

Scheffel, Maren; Drachsler, Hendrik; Stoyanov, Slavi; Specht, Marcus

2014-01-01

This article proposes a framework of quality indicators for learning analytics that aims to standardise the evaluation of learning analytics tools and to provide a mean to capture evidence for the impact of learning analytics on educational practices in a standardised manner. The criteria of the framework and its quality indicators are based on…

Practical procedures

International Nuclear Information System (INIS)

Ferreira, Paulo Roberto Rocha

2016-01-01

In this last chapter practical aspects to provide occupational safety in industries which produces NORM are presented. Also equipment to detect, identify and quantify the internal and external exposure is mentioned. The adequate use of these devices has the objective of reducing the radioactivity risk. The magnitude and radiation dose units for ionizing radiations are also presented. The B annex includes a suggestion of menu with basic concepts for training in occupational radiation protection

Can We Practically Bring Physics-based Modeling Into Operational Analytics Tools?

Energy Technology Data Exchange (ETDEWEB)

Granderson, Jessica [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Bonvini, Marco [Whisker Labs, Oakland, CA (United States); Piette, Mary Ann [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Page, Janie [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Lin, Guanjing [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hu, R. Lilly [Univ. of California, Berkeley, CA (United States)

2017-08-11

We present that analytics software is increasingly used to improve and maintain operational efficiency in commercial buildings. Energy managers, owners, and operators are using a diversity of commercial offerings often referred to as Energy Information Systems, Fault Detection and Diagnostic (FDD) systems, or more broadly Energy Management and Information Systems, to cost-effectively enable savings on the order of ten to twenty percent. Most of these systems use data from meters and sensors, with rule-based and/or data-driven models to characterize system and building behavior. In contrast, physics-based modeling uses first-principles and engineering models (e.g., efficiency curves) to characterize system and building behavior. Historically, these physics-based approaches have been used in the design phase of the building life cycle or in retrofit analyses. Researchers have begun exploring the benefits of integrating physics-based models with operational data analytics tools, bridging the gap between design and operations. In this paper, we detail the development and operator use of a software tool that uses hybrid data-driven and physics-based approaches to cooling plant FDD and optimization. Specifically, we describe the system architecture, models, and FDD and optimization algorithms; advantages and disadvantages with respect to purely data-driven approaches; and practical implications for scaling and replicating these techniques. Finally, we conclude with an evaluation of the future potential for such tools and future research opportunities.

Procedures For Microbial-Ecology Laboratory

Science.gov (United States)

Huff, Timothy L.

1993-01-01

Microbial Ecology Laboratory Procedures Manual provides concise and well-defined instructions on routine technical procedures to be followed in microbiological laboratory to ensure safety, analytical control, and validity of results.

Analytical Thinking, Analytical Action: Using Prelab Video Demonstrations and e-Quizzes to Improve Undergraduate Preparedness for Analytical Chemistry Practical Classes

Science.gov (United States)

Jolley, Dianne F.; Wilson, Stephen R.; Kelso, Celine; O'Brien, Glennys; Mason, Claire E.

2016-01-01

This project utilizes visual and critical thinking approaches to develop a higher-education synergistic prelab training program for a large second-year undergraduate analytical chemistry class, directing more of the cognitive learning to the prelab phase. This enabled students to engage in more analytical thinking prior to engaging in the…

Risk management in clinical practice. Part 5. Ethical considerations for dental enhancement procedures.

Science.gov (United States)

Ahmad, I

2010-09-11

After the demise of the Industrial Age, we currently live in an 'Information Age' fuelled mainly by the Internet, with an ever-increasing medically and dentally literate population. The media has played its role by reporting scientific advances, as well as securitising medical and dental practices. Reality television such as 'Extreme makeovers' has also raised public awareness of body enhancements, with a greater number of people seeking such procedures. To satiate this growing demand, the dental industry has flourished by introducing novel cosmetic products such as bleaching kits, tooth coloured filling materials and a variety of dental ceramics. In addition, one only has to browse through a dental journal to notice innumerable courses and lectures on techniques for providing cosmetic dentistry. The incessant public interest, combined with unrelenting marketing by companies is gradually shifting the balance of dental care from a healing to an enhancement profession. The purpose of this article is to endeavour to answer questions such as, What is aesthetic or cosmetic dentistry? Why do patients seek cosmetic dentistry? Are enhancement procedures a part of dental practice? What, if any, ethical guidelines and constraints apply to elective enhancement procedures? What is the role of the dentist in providing or encouraging this type of 'therapy'? What treatment modalities are available for aesthetic dental treatment?

Analytical Methods for Quantification of Vitamin D and Implications for Research and Clinical Practice.

Science.gov (United States)

Stokes, Caroline S; Lammert, Frank; Volmer, Dietrich A

2018-02-01

A plethora of contradictory research surrounds vitamin D and its influence on health and disease. This may, in part, result from analytical difficulties with regard to measuring vitamin D metabolites in serum. Indeed, variation exists between analytical techniques and assays used for the determination of serum 25-hydroxyvitamin D. Research studies into the effects of vitamin D on clinical endpoints rely heavily on the accurate assessment of vitamin D status. This has important implications, as findings from vitamin D-related studies to date may potentially have been hampered by the quantification techniques used. Likewise, healthcare professionals are increasingly incorporating vitamin D testing and supplementation regimens into their practice, and measurement errors may be also confounding the clinical decisions. Importantly, the Vitamin D Standardisation Programme is an initiative that aims to standardise the measurement of vitamin D metabolites. Such a programme is anticipated to eliminate the inaccuracies surrounding vitamin D quantification. Copyright© 2018, International Institute of Anticancer Research (Dr. George J. Delinasios), All rights reserved.

Multimedia Football Viewing: Embedded Rules, Practice, and Video Context in IVD Procedural Learning.

Science.gov (United States)

Kim, Eunsoon; Young, Michael F.

This study investigated the effects of interactive video (IVD) instruction with embedded rules (production system rules) and practice with feedback on learners' academic achievement and perceived self efficacy in the domain of procedural knowledge for watching professional football. Subjects were 71 female volunteers from undergraduate education…

Reference materials for micro-analytical nuclear techniques

International Nuclear Information System (INIS)

Valkovic, V.; Zeisler, R.; Bernasconi, G.; Danesi, P.R.

1994-01-01

Direct application of many existing reference materials in micro-analytical procedures such as energy dispersive x-ray fluorescence (EDXRF), particle induced x-ray emission spectroscopy (PIXE) and ion probe techniques for the determination of trace elements is often impossible or difficult because: 1) other constituents present in large amounts interfere with the determination; 2) trace components are not sufficiently homogeneously distributed in the sample. Therefore specific natural-matrix reference materials containing very low levels of trace elements and having high degree of homogeneity are required for many micro-analytical procedures. In this report, selection of the types of environmental and biological materials which are suitable for micro-analytical techniques will be discussed. (author)

Bio-Oil Analysis Laboratory Procedures | Bioenergy | NREL

Science.gov (United States)

Bio-Oil Analysis Laboratory Procedures Bio-Oil Analysis Laboratory Procedures NREL develops laboratory analytical procedures (LAPs) for the analysis of raw and upgraded pyrolysis bio-oils. These standard procedures have been validated and allow for reliable bio-oil analysis. Procedures Determination

Evaluation of the effect of coal cleaning of fugitive elements. Part II. Analytical methods. Final report, Phase II

Energy Technology Data Exchange (ETDEWEB)

Bosshart, R.E.; Price, A.A.; Ford, C.T.

1980-03-01

This report contains the analytical and test methods which were used routinely at Bituminous Coal Research, Inc. during the project. The procedures contained herein should aid coal industry laboratories and others, including commercial laboratories, who might be required to determine trace elements in coal. Some of the procedures have been presented in previous BCR reports; however, this report includes additional procedures which are described in greater detail. Also presented are many as the more basic coal methods which have been in use at BCR for many years, or which have been adapted or refined from other standard reference sources for coal and water. The basis for choosing specific analytical procedures for trace elements in coal is somewhat complex. At BCR, atomic absorption was selected as the basic method in the development of these procedures. The choice was based on sensitivity, selectivity, accuracy, precision, practicability, and economy. Whenever possible, the methods developed had to be both adequate and amenable for use by coal industry laboratories by virtue of relative simplicity and cost. This is not to imply that the methods described are simple or inexpensive; however, atomic abosrption techniques do meet these criteria in relation to more complex and costly methods such as neutron activation, mass spectrometry, and x-ray fluorescence, some of which require highly specialized personnel as well as access to sophisticated nuclear and computational facilities. Many of the analytical procedures for trace elements in coal have been developed or adapted specifically for the BCR studies. Their presentation is the principal purpose of this report.

Biomass Compositional Analysis Laboratory Procedures | Bioenergy | NREL

Science.gov (United States)

Biomass Compositional Analysis Laboratory Procedures Biomass Compositional Analysis Laboratory Procedures NREL develops laboratory analytical procedures (LAPs) for standard biomass analysis. These procedures help scientists and analysts understand more about the chemical composition of raw biomass

Alternative practices of achieving anaesthesia for dental procedures: a review.

Science.gov (United States)

Angelo, Zavattini; Polyvios, Charalambous

2018-04-01

Managing pain and anxiety in patients has always been an essential part of dentistry. To prevent pain, dentists administer local anaesthesia (LA) via a needle injection. Unfortunately, anxiety and fear that arise prior to and/or during injection remains a barrier for many children and adults from receiving dental treatment. There is a constant search for techniques to alleviate the invasive and painful nature of the needle injection. In recent years, researchers have developed alternative methods which enable dental anaesthesia to be less invasive and more patient-friendly. The aim of this review is to highlight the procedures and devices available which may replace the conventional needle-administered local anaesthesia. The most known alternative methods in providing anaesthesia in dentistry are: topical anaesthesia, electronic dental anaesthesia, jet-injectors, iontophoresis, and computerized control local anaesthesia delivery systems. Even though these procedures are well accepted by patients to date, it is the authors' opinion that the effectiveness practicality of such techniques in general dentistry is not without limitations.

An analytical procedure for determination of sulphur species and isotopes in boreal acid sulphate soils and sediments

Directory of Open Access Journals (Sweden)

K. BACKLUND

2008-12-01

Full Text Available An analytical scheme suitable for boreal acid sulphate (AS soils and sediments was developed on the basis of existing methods. The presented procedure can be used to quantify and discriminate among acid volatile sulphide, cold chromium reducible sulphur, hot chromium reducible sulphur, elemental sulphur, sulphate sulphur, organic sulphur, total reducible sulphur and total sulphur. The sulphur fractions are recovered as either Ag2S or BaSO4 precipitates and can further be used for isotope analysis. Overlaps between sulphur species are common during speciation, and must be minimized. Some of these overlaps are caused by poor sampling and storage, inappropriate conditions during the distillation, or natural variations in the sample (e.g. Fe3+ interference and grain size. The procedural impact was determined by conducting tests on both artificial and natural samples containing one or several sulphur species. The method is applied on reduced sediment from an AS soil locality (Överpurmo and a brackish lake (Larsmo Lake in western Finland and the results, including S-isotopes, are discussed.;

State-of-the-practice : evaluation of sediment basin design, construction, maintenance, and inspection procedures.

Science.gov (United States)

2012-08-01

The following document is the summary of results from a survey that was conducted to evaluate : the state-of-the-practice for sediment basin design, construction, maintenance, and inspection : procedures by State Highway Agencies (SHAs) across the na...

Development of an analytical procedure for plutonium in the concentration range of femtogram/gram and its application to environmental samples

International Nuclear Information System (INIS)

Schuettelkopf, H.

1981-09-01

To study the behaviour of plutonium in the environment and to measure plutonium in the vicinity of nuclear facilities, a quick, sensitive analytical method is required which can be applied to all sample materials found in the environment. For a sediment contaminated with plutonium a boiling out method using first HNO 3 /HF and subsequently HNO 3 /Al(NO 3 ) 3 was found to be successful. The leaching solution was then extracted by TOPO and the plutonium backextracted by ascorbic acid/HCl. Some different purification steps and finally electroplating using ammonium oxalate led to an optimum sample for α- spectroscopic determination of plutonium. An analytical method was worked out for plutonium which can be applied to all materials found in the environment. The sample size is 100 g but it might also be much greater. The average chemical yield is 70 and 80%. The detection limit for soil samples is 0.1 fCi/g and for plant samples 0.5 fCi/g. One technician can perform eight analyses per working day. The analytical procedure was applied to a large number of environmental samples and the results of these analyses are indicated. (orig./RB) [de

Current Administrative court practice in the procedure of Public Procurement

Directory of Open Access Journals (Sweden)

Silvio Čović

2017-01-01

Full Text Available Under the current conditions of complex and difficult economic and social circumstances and given the comparative possibilities and economic effects, the system of public procurement which is firstly at a legal level regulated by the Public Procurement Act 8 (Zakon o javnoj nabavi of 2011 (further referred to as: PPA (ZN, is of particular importance for the entire legal, political and economic system of the Republic of Croatia. Public procurement in essence represents contracting the procurement of goods, works or services. The specifities of that system are comprised, above all, of regulation of entering contractual relations between the public and private sector. Therefore, this system in principle must be formal in order to protect equality of competitors in the public procurement procedure and also in the general interest. Appreciating the legal tradition and indigenous particularities, the author’s fundamental aims consisted of providing and analysing administrative court practice in the context of international legal acquis communautaire showing some legal regulation in practice of disputable aspects of the system of public procurement in Croatia and the doubts emerging from current administrative court practice.

Development of analytical procedures for the determination of hexavalent chromium in corrosion prevention coatings used in the automotive industry.

Science.gov (United States)

Séby, F; Castetbon, A; Ortega, R; Guimon, C; Niveau, F; Barrois-Oudin, N; Garraud, H; Donard, O F X

2008-05-01

The European directive 2000/53/EC limits the use of Cr(VI) in vehicle manufacturing. Although a maximum of 2 g of Cr(VI) was authorised per vehicle for corrosion prevention coatings of key components, since July 2007 its use has been prohibited except for some particular applications. Therefore, the objective of this work was to develop direct analytical procedures for Cr(VI) determination in the different steel coatings used for screws. Instead of working directly with screws, the optimisation of the procedures was carried out with metallic plates homogeneously coated to improve the data comparability. Extraction of Cr(VI) from the metallic parts was performed by sonication. Two extraction solutions were tested: a direct water extraction solution used in standard protocols and an ammonium/ammonia buffer solution at pH 8.9. The extracts were further analysed for Cr speciation by high-performance liquid chromatography (HPLC) inductively coupled plasma (ICP) atomic emission spectrometry or HPLC ICP mass spectrometry depending on the concentration level. When possible, the coatings were also directly analysed by solid speciation techniques (X-ray photoelectron spectroscopy, XPS, and X-ray absorption near-edge structure, XANES) for validation of the results. Very good results between the different analytical approaches were obtained for the sample of coating made up of a heated paint containing Zn, Al and Cr when using the extracting buffer solution at pH 8.9. After a repeated four-step extraction procedure on the same portion test, taking into account the depth of the surface layer reached, good agreement with XPS and XANES results was obtained. In contrast, for the coatings composed of an alkaline Zn layer where Cr(VI) and Cr(III) are deposited, only the extraction procedure using water allowed the detection of Cr(VI). To elucidate the Cr(VI) reduction during extraction at pH 8.9, the reactivity of Cr(VI) towards different species of Zn generally present in the

On the Temporal Stability of Analyte Recognition with an E-Nose Based on a Metal Oxide Sensor Array in Practical Applications.

Science.gov (United States)

Kiselev, Ilia; Sysoev, Victor; Kaikov, Igor; Koronczi, Ilona; Adil Akai Tegin, Ruslan; Smanalieva, Jamila; Sommer, Martin; Ilicali, Coskan; Hauptmannl, Michael

2018-02-11

The paper deals with a functional instability of electronic nose (e-nose) units which significantly limits their real-life applications. Here we demonstrate how to approach this issue with example of an e-nose based on a metal oxide sensor array developed at the Karlsruhe Institute of Technology (Germany). We consider the instability of e-nose operation at different time scales ranging from minutes to many years. To test the e-nose we employ open-air and headspace sampling of analyte odors. The multivariate recognition algorithm to process the multisensor array signals is based on the linear discriminant analysis method. Accounting for the received results, we argue that the stability of device operation is mostly affected by accidental changes in the ambient air composition. To overcome instabilities, we introduce the add-training procedure which is found to successfully manage both the temporal changes of ambient and the drift of multisensor array properties, even long-term. The method can be easily implemented in practical applications of e-noses and improve prospects for device marketing.

LC-MS/MS analytical procedure to quantify tris(nonylphenyl)phosphite, as a source of the endocrine disruptors 4-nonylphenols, in food packaging materials.

Science.gov (United States)

Mottier, Pascal; Frank, Nancy; Dubois, Mathieu; Tarres, Adrienne; Bessaire, Thomas; Romero, Roman; Delatour, Thierry

2014-01-01

Tris(nonylphenyl)phosphite, an antioxidant used in polyethylene resins for food applications, is problematic since it is a source of the endocrine-disrupting chemicals 4-nonylphenols (4NP) upon migration into packaged foods. As a response to concerns surrounding the presence of 4NP-based compounds in packaging materials, some resin producers and additive suppliers have decided to eliminate TNPP from formulations. This paper describes an analytical procedure to verify the "TNPP-free" statement in multilayer laminates used for bag-in-box packaging. The method involves extraction of TNPP from laminates with organic solvents followed by detection/quantification by LC-MS/MS using the atmospheric pressure chemical ionisation (APCI) mode. A further acidic treatment of the latter extract allows the release of 4NP from potentially extracted TNPP. 4NP is then analysed by LC-MS/MS using electrospray ionisation (ESI) mode. This two-step analytical procedure ensures not only TNPP quantification in laminates, but also allows the flagging of other possible sources of 4NP in such packaging materials, typically as non-intentionally added substances (NIAS). The limits of quantification were 0.50 and 0.48 µg dm⁻² for TNPP and 4NP in laminates, respectively, with recoveries ranging between 87% and 114%. Usage of such analytical methodologies in quality control operations has pointed to a lack of traceability at the packaging supplier level and cross-contamination of extrusion equipment at the converter level, when TNPP-containing laminates are processed on the same machine beforehand.

Comparative evaluation of analytical procedures for the recovery of Enterobacteriaceae in coastal marine waters; Valutazione comparativa di procedure analitiche per il rilevamento di Enterobacteriaceae in acque marine costiere

Energy Technology Data Exchange (ETDEWEB)

Bonadonna, Lucia; Chiaretti, Gianluca; Coccia, Anna Maria; Semproni, Maurizio [Istituto Superiore di Sanita`, Rome (Italy). Lab. di Igiene Ambientale

1997-03-01

The use of quick and reliable procedures is fundamental for water quality evaluation control. In order to improve the analytical methods for microbiological examination of bathing waters, a comparison of different substrates for the recovery of Enterobacteriaceae from coastal marine waters was carried out. The medium indicated in the Italian technical normative has shown a good selectivity when the red colonies with a green metallic surface sheen were counted, as stated in the Standard Methods. On the other hand, the chronogenic substrate used in this study resulted easy to read, selective and specific for both Escherichia coli and total coliforms.

Analytic of elements for the determination of soil->plant transfer factors

International Nuclear Information System (INIS)

Liese, T.

1985-02-01

This article describes a part of the conventional analytical work, which was done to determine soil to plant transfer factors. The analytical methods, the experiments to find out the best way of sample digestion and the resulting analytical procedures are described. Analytical methods are graphite furnace atomic absorption spectrometry (GFAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES). In case of ICP-AES the necessity of right background correction and correction of the spectral interferences is shown. The reliability of the analytical procedure is demonstrated by measuring different kinds of standard reference materials and by comparison of AAS and AES. (orig./HP) [de

Main hearing according to the new Serbian Criminal Procedure Code: Survey in practice

Directory of Open Access Journals (Sweden)

Soković Snežana

2017-01-01

Full Text Available The main hearing is the central part of the criminal procedure. In Serbia, the reform of the national criminal procedure legislation has brought about numerous changes related to this stage of criminal proceedings. Numerous objections have been addressed to the almost entirely new legal text. In an attempt to examine the advantages and disadvantages of the new legislation and observe how the prescribed rules are applied in practice, the authors have conducted an empirical research by attending 205 main hearings which were conducted under the rules of the new Criminal Procedure Code. The research covers a huge number of related issues but, given the page limit, this paper will focus on individual issues observed in trial proceedings. The focal point of reference is the examination of witness, but the authors also consider a number of other issues: the examination of expert witness, the delay of the trial, and the use of a video-link as a novelty introduced owing to the technological achievements of the modern era. The article is organized into several parts. The authors first provide a theoretical background of the issue under consideration and, then, present and discuss the research results provided in tables. In the third part of the article, the authors draw specific conclusions about the current practice in trials proceedings.

Recent trends in analytical procedures in forensic toxicology.

Science.gov (United States)

Van Bocxlaer, Jan F

2005-12-01

Forensic toxicology is a very demanding discipline,heavily dependent on good analytical techniques. That is why new trends appear continuously. In the past years. LC-MS has revolutionized target compound analysis and has become the trend, also in toxicology. In LC-MS screening analysis, things are less straightforward and several approaches exist. One promising approach based on accurate LC-MSTOF mass measurements and elemental formula based library searches is discussed. This way of screening has already proven its applicability but at the same time it became obvious that a single accurate mass measurement lacks some specificity when using large compound libraries. CE too is a reemerging approach. The increasingly polar and ionic molecules encountered make it a worthwhile addition to e.g. LC, as illustrated for the analysis of GHB. A third recent trend is the use of MALDI mass spectrometry for small molecules. It is promising for its ease-of-use and high throughput. Unfortunately, re-ports of disappointment but also accomplishment, e.g. the quantitative analysis of LSD as discussed here, alternate, and it remains to be seen whether MALDI really will establish itself. Indeed, not all new trends will prove themselves but the mere fact that many appear in the world of analytical toxicology nowadays is, in itself, encouraging for the future of (forensic) toxicology.

8. All Polish Conference on Analytical Chemistry: Analytical Chemistry for the Community of the 21. Century

International Nuclear Information System (INIS)

Koscielniak, P.; Wieczorek, M.; Kozak, J.

2010-01-01

Book of Abstracts contains short descriptions of lectures, communications and posters presented during 8 th All Polish Conference on Analytical Chemistry (Cracow, 4-9.07.2010). Scientific programme consisted of: basic analytical problems, preparation of the samples, chemometry and metrology, miniaturization of the analytical procedures, environmental analysis, medicinal analyses, industrial analyses, food analyses, biochemical analyses, analysis of relicts of the past. Several posters were devoted to the radiochemical separations, radiochemical analysis, environmental behaviour of the elements important for the nuclear science and the professional tests.

Proceedings of the DAE-BRNS theme meeting on recent trends in analytical chemistry: book of abstracts

International Nuclear Information System (INIS)

2012-01-01

Analytical chemistry is the branch of science that deals with the determination of the identity and concentration of various elements and compounds in different matrices including living systems. The practice of analytical chemistry as a distinct discipline possibly began in the late eighteenth century with the work of the French chemist Antoine-Laurent Lavoisier and his contemporaries. Further progress was made in the nineteenth century by scientists like Carl Fresenius and Karl Friedrich Mohr. Fresenius developed the qualitative analysis method and it formed the topic of the first textbook of analytical chemistry. He also developed the gravimetric technique. Mohr developed many laboratory analytical procedures and devices. Most of the major advances in analytical chemistry, as in many other branches of science, took place in the twentieth century after the Second World War. The demand for new and increasingly sophisticated analytical techniques for bio-medical, regulatory and strategic requirements, along with the progress in electro-mechanical instrumentation, automation and computerization, has opened up new challenges and opportunities for analytical chemists and allied scientists in the years to come. Papers relevant to INIS are indexed separately

Manual of selected physico-chemical analytical methods. IV

International Nuclear Information System (INIS)

Beran, M.; Klosova, E.; Krtil, J.; Sus, F.; Kuvik, V.; Vrbova, L.; Hamplova, M.; Lengyel, J.; Kelnar, L.; Zakouril, K.

1990-11-01

The Central Testing Laboratory of the Nuclear Research Institute at Rez has for a decade been participating in the development of analytical procedures and has been providing analyses of samples of different types and origin. The analytical procedures developed have been published in special journals and a number of them in the Manuals of analytical methods, in three parts. The 4th part of the Manual contains selected physico-chemical methods developed or modified by the Laboratory in the years 1986-1990 within the project ''Development of physico-chemical analytical methods''. In most cases, techniques are involved for non-nuclear applications. Some can find wider applications, especially in analyses of environmental samples. Others have been developed for specific cases of sample analyses or require special instrumentation (mass spectrometer), which partly restricts their applicability by other institutions. (author)

Simplified Analytical Method for Optimized Initial Shape Analysis of Self-Anchored Suspension Bridges and Its Verification

Directory of Open Access Journals (Sweden)

Myung-Rag Jung

2015-01-01

Full Text Available A simplified analytical method providing accurate unstrained lengths of all structural elements is proposed to find the optimized initial state of self-anchored suspension bridges under dead loads. For this, equilibrium equations of the main girder and the main cable system are derived and solved by evaluating the self-weights of cable members using unstrained cable lengths and iteratively updating both the horizontal tension component and the vertical profile of the main cable. Furthermore, to demonstrate the validity of the simplified analytical method, the unstrained element length method (ULM is applied to suspension bridge models based on the unstressed lengths of both cable and frame members calculated from the analytical method. Through numerical examples, it is demonstrated that the proposed analytical method can indeed provide an optimized initial solution by showing that both the simplified method and the nonlinear FE procedure lead to practically identical initial configurations with only localized small bending moment distributions.

Analytically solvable models of reaction-diffusion systems

Energy Technology Data Exchange (ETDEWEB)

Zemskov, E P; Kassner, K [Institut fuer Theoretische Physik, Otto-von-Guericke-Universitaet, Universitaetsplatz 2, 39106 Magdeburg (Germany)

2004-05-01

We consider a class of analytically solvable models of reaction-diffusion systems. An analytical treatment is possible because the nonlinear reaction term is approximated by a piecewise linear function. As particular examples we choose front and pulse solutions to illustrate the matching procedure in the one-dimensional case.

Application of modified analytical function for approximation and computer simulation of diffraction profile

International Nuclear Information System (INIS)

Marrero, S. I.; Turibus, S. N.; Assis, J. T. De; Monin, V. I.

2011-01-01

Data processing of the most of diffraction experiments is based on determination of diffraction line position and measurement of broadening of diffraction profile. High precision and digitalisation of these procedures can be resolved by approximation of experimental diffraction profiles by analytical functions. There are various functions for these purposes both simples, like Gauss function, but no suitable for wild range of experimental profiles and good approximating functions but complicated for practice using, like Vougt or PersonVII functions. Proposed analytical function is modified Cauchy function which uses two variable parameters allowing describing any experimental diffraction profile. In the presented paper modified function was applied for approximation of diffraction lines of steels after various physical and mechanical treatments and simulation of diffraction profiles applied for study of stress gradients and distortions of crystal structure. (Author)

Procedural sedation and analgesia practices by emergency physicians in the Netherlands: a nationwide survey

NARCIS (Netherlands)

Kuypers, Maybritt I.; Smits, Gaël J. P.; Valkenet, Suzanne C.; Thijssen, Wendy A. M. H.; Plötz, Frans B.

2017-01-01

Several efforts have been made to assure and to improve the quality of procedural sedation and analgesia (PSA) performed by emergency physicians (EPs) in The Netherlands. This study investigated the current PSA practice and competences of EPs in both adult and paediatric patients. In particular, if

78 FR 22490 - Administrative Practice and Procedure; Postal Service; Review of Price Cap Rules

Science.gov (United States)

2013-04-16

...] Administrative Practice and Procedure; Postal Service; Review of Price Cap Rules AGENCY: Postal Regulatory Commission. ACTION: Proposed rule. SUMMARY: The Commission is initiating a review of its Price Cap Rules. The... implemented without a price cap calculation. Docket No. R2011-5, Order Approving Market Dominant Price...

Hasse diagram as a green analytical metrics tool: ranking of methods for benzo[a]pyrene determination in sediments.

Science.gov (United States)

Bigus, Paulina; Tsakovski, Stefan; Simeonov, Vasil; Namieśnik, Jacek; Tobiszewski, Marek

2016-05-01

This study presents an application of the Hasse diagram technique (HDT) as the assessment tool to select the most appropriate analytical procedures according to their greenness or the best analytical performance. The dataset consists of analytical procedures for benzo[a]pyrene determination in sediment samples, which were described by 11 variables concerning their greenness and analytical performance. Two analyses with the HDT were performed-the first one with metrological variables and the second one with "green" variables as input data. Both HDT analyses ranked different analytical procedures as the most valuable, suggesting that green analytical chemistry is not in accordance with metrology when benzo[a]pyrene in sediment samples is determined. The HDT can be used as a good decision support tool to choose the proper analytical procedure concerning green analytical chemistry principles and analytical performance merits.

Pre-procedural fasting for coronary interventions: is it time to change practice?

Science.gov (United States)

Hamid, Tahir; Aleem, Qaiser; Lau, Yeecheng; Singh, Ravi; McDonald, John; Macdonald, John E; Sastry, Sanjay; Arya, Sanjay; Bainbridge, Anthony; Mudawi, Telal; Balachandran, Kanarath

2014-04-01

Traditionally, patients are kept nil-per-os/nil-by-mouth (NPO/NBM) prior to invasive cardiac procedures, yet there exists neither evidence nor clear guidance about the benefits of this practice. To demonstrate that percutaneous cardiac catheterisation does not require prior fasting. The data source is a retrospective analysis of data registry of consecutive patients who underwent percutaneous coronary intervention (PCI) for acute coronary syndrome (ACS) and stable angina at two district general hospitals in the UK with no on-site cardiac surgery services. A total of 1916 PCI procedures were performed over a 3-year period. None of the patients were kept NPO/NBM prior to their coronary procedures. The mean age was 67±16 years. 1349 (70%) were men; 38.5% (738/1916) had chronic stable angina, while the rest had ACS. 21% (398/1916) were diabetics while 53% (1017/1916) were hypertensive. PCI was technically successful in 95% (1821/1916) patients. 88.5% (1697/1916) had transradial approach. 77% (570/738) of elective PCI patients were discharged within 6 h postprocedure. No patients required emergency endotracheal intubation and there were no occurrences of intraprocedural or postprocedural aspiration pneumonia. Our observational study demonstrates that patients undergoing PCI do not need to be fasted prior to their procedures.

Figures of merit of inductively coupled plasma mass spectrometry for compliant analysis of waters and wastes using USEPA standard operating procedures

International Nuclear Information System (INIS)

Brenner, I.B.; Spence, B.; Walder, A.

2004-01-01

The scope of this study is to critically review the performance of the ICP-MS instrumentation and aspects of the analytical methodology for compliant determination of Al, Sb, As, Ba, Be, Cd, Cr, Co, Cu, Fe, Pb, Mn, Ni, Se, Ag, Tl, V, and Zn in surface and subsurface water, soil, sludge, sediments and various solid wastes. The evaluation was performed using conventional and practical figures of analytical merit detailed in using USEPA SW (Solid Waste) 846 procedures and ISO/EC 17025

Validation of a new analytical procedure for determination of residual solvents in [18F]FDG by gas chromatography

International Nuclear Information System (INIS)

Costa, Flávia M.; Costa, Cassiano L.S.; Silva, Juliana B.; Ferreira, Soraya M.Z.M.D.

2017-01-01

Fludeoxyglucose F 18 ([ 18 F]FDG) is the most used radiopharmaceutical for positron emission tomography, especially on oncology. Organic solvents such as ether, ethanol and acetonitrile might be used in the synthesis of [ 18 F]FDG; however, they might not be completely removed during purification steps. The determination of residual solvents in [ 18 F]FDG is required in the European Pharmacopoeia (EP) and the United States Pharmacopeia (USP) monographs. While the procedure described in the EP is quite general, the one described in the USP requires a long runtime (about 13 minutes). In this work a simple and fast (4-minute) analytical procedure was developed and validated for determination of residual solvents in [ 18 F]FDG. Analyses were carried out in a Perkin Elmer gas chromatograph equipped with a flame ionization detector. The separation was obtained on a 0.53-mm x 30 m fused-silica column. Validation included the evaluation of various parameters, such as: specificity, linearity and range, limits of detection and quantitation, precision (repeatability and intermediate precision), accuracy, and robustness. Results were found to be within acceptable limits, indicating the developed procedure is suitable for its intended application. Considering the short half-life of fluorine-18 (109.7 minutes), this new method could be a valuable alternative for routine quality control of [ 18 F]FDG. (author)

The Impact of Business Analytics on Management Accounting

DEFF Research Database (Denmark)

Nielsen, Steen

The concept of 'analytics' has gained great interest in the academic literature but mostly for practical management since its formal show in the beginning of 2000. Analytics provide an integrated environment for predictive and descriptive modeling, data mining, text analytics, forecasting...

Life cycle management of analytical methods.

Science.gov (United States)

Parr, Maria Kristina; Schmidt, Alexander H

2018-01-05

In modern process management, the life cycle concept gains more and more importance. It focusses on the total costs of the process from invest to operation and finally retirement. Also for analytical procedures an increasing interest for this concept exists in the recent years. The life cycle of an analytical method consists of design, development, validation (including instrumental qualification, continuous method performance verification and method transfer) and finally retirement of the method. It appears, that also regulatory bodies have increased their awareness on life cycle management for analytical methods. Thus, the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH), as well as the United States Pharmacopeial Forum discuss the enrollment of new guidelines that include life cycle management of analytical methods. The US Pharmacopeia (USP) Validation and Verification expert panel already proposed a new General Chapter 〈1220〉 "The Analytical Procedure Lifecycle" for integration into USP. Furthermore, also in the non-regulated environment a growing interest on life cycle management is seen. Quality-by-design based method development results in increased method robustness. Thereby a decreased effort is needed for method performance verification, and post-approval changes as well as minimized risk of method related out-of-specification results. This strongly contributes to reduced costs of the method during its life cycle. Copyright © 2017 Elsevier B.V. All rights reserved.

Web GIS in practice IX: a demonstration of geospatial visual analytics using Microsoft Live Labs Pivot technology and WHO mortality data.

Science.gov (United States)

Kamel Boulos, Maged N; Viangteeravat, Teeradache; Anyanwu, Matthew N; Ra Nagisetty, Venkateswara; Kuscu, Emin

2011-03-16

The goal of visual analytics is to facilitate the discourse between the user and the data by providing dynamic displays and versatile visual interaction opportunities with the data that can support analytical reasoning and the exploration of data from multiple user-customisable aspects. This paper introduces geospatial visual analytics, a specialised subtype of visual analytics, and provides pointers to a number of learning resources about the subject, as well as some examples of human health, surveillance, emergency management and epidemiology-related geospatial visual analytics applications and examples of free software tools that readers can experiment with, such as Google Public Data Explorer. The authors also present a practical demonstration of geospatial visual analytics using partial data for 35 countries from a publicly available World Health Organization (WHO) mortality dataset and Microsoft Live Labs Pivot technology, a free, general purpose visual analytics tool that offers a fresh way to visually browse and arrange massive amounts of data and images online and also supports geographic and temporal classifications of datasets featuring geospatial and temporal components. Interested readers can download a Zip archive (included with the manuscript as an additional file) containing all files, modules and library functions used to deploy the WHO mortality data Pivot collection described in this paper.

Test of a potential link between analytic and nonanalytic category learning and automatic, effortful processing.

Science.gov (United States)

Tracy, J I; Pinsk, M; Helverson, J; Urban, G; Dietz, T; Smith, D J

2001-08-01

The link between automatic and effortful processing and nonanalytic and analytic category learning was evaluated in a sample of 29 college undergraduates using declarative memory, semantic category search, and pseudoword categorization tasks. Automatic and effortful processing measures were hypothesized to be associated with nonanalytic and analytic categorization, respectively. Results suggested that contrary to prediction strong criterion-attribute (analytic) responding on the pseudoword categorization task was associated with strong automatic, implicit memory encoding of frequency-of-occurrence information. Data are discussed in terms of the possibility that criterion-attribute category knowledge, once established, may be expressed with few attentional resources. The data indicate that attention resource requirements, even for the same stimuli and task, vary depending on the category rule system utilized. Also, the automaticity emerging from familiarity with analytic category exemplars is very different from the automaticity arising from extensive practice on a semantic category search task. The data do not support any simple mapping of analytic and nonanalytic forms of category learning onto the automatic and effortful processing dichotomy and challenge simple models of brain asymmetries for such procedures. Copyright 2001 Academic Press.

Translational ethics: an analytical framework of translational movements between theory and practice and a sketch of a comprehensive approach.

Science.gov (United States)

Bærøe, Kristine

2014-09-30

Translational research in medicine requires researchers to identify the steps to transfer basic scientific discoveries from laboratory benches to bedside decision-making, and eventually into clinical practice. On a parallel track, philosophical work in ethics has not been obliged to identify the steps to translate theoretical conclusions into adequate practice. The medical ethicist A. Cribb suggested some years ago that it is now time to debate 'the business of translational' in medical ethics. Despite the very interesting and useful perspective on the field of medical ethics launched by Cribb, the debate is still missing. In this paper, I take up Cribb's invitation and discuss further analytic distinctions needed to base an ethics aiming to translate between theory and practice. The analytic distinctions needed to base an ethics aiming to translate between theory and practice are identified as 'movements of translation'. I explore briefly what would constitute success and limitations to these intended translational movements by addressing the challenges of the epistemological gap between philosophical and practical ethics. The categories of translational movements I suggest can serve as a starting point for a systematic, collective self-inspection and discussion of the merits and limitations of the various academic and practical activities that bioethicists are engaged in. I further propose that translational ethics could be considered as a new discipline of ethical work constructively structured around compositions of translational movements. Breaking the idea of translational ethics into distinct translational movements provide us with a nuanced set of conditions to explore and discuss the justification and limitations of various efforts carried out in the field of bioethics. In this sense, the proposed framework could be a useful vehicle for augmented collective, self-reflexivity among both philosophers and practitioners who are 'doing bioethics'. Also

Analytical performance, agreement and user-friendliness of six point-of-care testing urine analysers for urinary tract infection in general practice

NARCIS (Netherlands)

Schot, Marjolein J C; van Delft, Sanne; Kooijman-Buiting, Antoinette M J; de Wit, Niek J; Hopstaken, Rogier M

2015-01-01

OBJECTIVE: Various point-of-care testing (POCT) urine analysers are commercially available for routine urine analysis in general practice. The present study compares analytical performance, agreement and user-friendliness of six different POCT urine analysers for diagnosing urinary tract infection

Predictive Analytics in Information Systems Research

OpenAIRE

Shmueli, Galit; Koppius, Otto

2011-01-01

textabstractThis research essay highlights the need to integrate predictive analytics into information systems research and shows several concrete ways in which this goal can be accomplished. Predictive analytics include empirical methods (statistical and other) that generate data predictions as well as methods for assessing predictive power. Predictive analytics not only assist in creating practically useful models, they also play an important role alongside explanatory modeling in theory bu...

A Big Data Analytics Methodology Program in the Health Sector

Science.gov (United States)

Lawler, James; Joseph, Anthony; Howell-Barber, H.

2016-01-01

The benefits of Big Data Analytics are cited frequently in the literature. However, the difficulties of implementing Big Data Analytics can limit the number of organizational projects. In this study, the authors evaluate business, procedural and technical factors in the implementation of Big Data Analytics, applying a methodology program. Focusing…

Analytic tests and their relation to jet fuel thermal stability

Energy Technology Data Exchange (ETDEWEB)

Heneghan, S.P.; Kauffman, R.E. [Univ. of Dayton Research Institute, OH (United States)

1995-05-01

The evaluation of jet fuel thermal stability (TS) by simple analytic procedures has long been a goal of fuels chemists. The reason is obvious: if the analytic chemist can determine which types of material cause his test to respond, the refiners will know which materials to remove to improve stability. Complicating this quest is the lack of an acceptable quantitative TS test with which to compare any analytic procedures. To circumvent this problem, we recently compiled the results of TS tests for 12 fuels using six separate test procedures. The results covering a range of flow and temperature conditions show that TS is not as dependent on test conditions as previously thought. Also, comparing the results from these tests with several analytic procedures shows that either a measure of the number of phenols or the total sulfur present in jet fuels is strongly indicative of the TS. The phenols have been measured using a cyclic voltammetry technique and the polar material by gas chromatography (atomic emission detection) following a solid phase extraction on silica gel. The polar material has been identified as mainly phenols (by mass spectrometry identification). Measures of the total acid number or peroxide concentration have little correlation with TS.

Advanced business analytics

CERN Document Server

Lev, Benjamin

2015-01-01

The book describes advanced business analytics and shows how to apply them to many different professional areas of engineering and management. Each chapter of the book is contributed by a different author and covers a different area of business analytics. The book connects the analytic principles with business practice and provides an interface between the main disciplines of engineering/technology and the organizational, administrative and planning abilities of management. It also refers to other disciplines such as economy, finance, marketing, behavioral economics and risk analysis. This book is of special interest to engineers, economists and researchers who are developing new advances in engineering management but also to practitioners working on this subject.

Analytical procedures for the determination of disperse azo dyes

Energy Technology Data Exchange (ETDEWEB)

Betowski, L.D.; Jones, T.L. (Environmental Protection Agency, Las Vegas, NV (USA)); Munslow, W.; Nunn, N.J. (Lockheed Engineering and Management Services Co., Las Vegas, NV (USA))

1988-09-01

Disperse Blue 79 is the most widely-used azo dye in the US. Its economic importance for the dye industry and textile industry is very great. Because of its use and potential for degradation to aromatic amines, this compound has been chosen for testing by the Interagency Testing Committee. The authors laboratory has been developing methods for the analytical determination of Disperse Blue 79 and any possible degradation products in wastewater. This work has been taking place in conjunction with the study of the fate of azo dyes in the wastewater treatment processes by the Water Engineering Research Laboratory of the US EPA in Cincinnati. There were various phases for this analytical development. The first step involved purifying the commercial material or presscake to obtain a standard for quantitative determination. A combination of HPLC, TLC and mass spectrometric methods was used to determine purity after extraction and column cleanup. Phase two involved the extraction of the dye from the matrices involved. The third phase was the actual testing of Disperse Blue 79 in the waste activated sludge system and anaerobic digester. Recovery of the dye and any degradation products at each sampling point (e.g., secondary effluent, waste activated sludge) was the goal of this phase.

Analytical Methodology for the Determination of Radium Isotopes in Environmental Samples

International Nuclear Information System (INIS)

2010-01-01

Reliable, comparable and 'fit for purpose' results are an essential requirement for any decision based on analytical measurements. For the analyst, the availability of tested and validated analytical procedures is an extremely important tool for production of such analytical measurements. For maximum utility, such procedures should be comprehensive, clearly formulated, and readily available to both the analyst and the customer for reference. Since 2004, the environment programme of the IAEA has included activities aimed at the development of a set of procedures for the determination of radionuclides in terrestrial environmental samples. Measurements of radium isotopes are important for radiological and environmental protection, geochemical and geochronological investigations, hydrology, etc. The suite of isotopes creates and stimulates continuing interest in the development of new methods for determination of radium in various media. In this publication, the four most routinely used analytical methods for radium determination in biological and environmental samples, i.e. alpha spectrometry, gamma spectrometry, liquid scintillation spectrometry and mass spectrometry, are reviewed

Analytical Tools to Improve Optimization Procedures for Lateral Flow Assays

Directory of Open Access Journals (Sweden)

Helen V. Hsieh

2017-05-01

Full Text Available Immunochromatographic or lateral flow assays (LFAs are inexpensive, easy to use, point-of-care medical diagnostic tests that are found in arenas ranging from a doctor’s office in Manhattan to a rural medical clinic in low resource settings. The simplicity in the LFA itself belies the complex task of optimization required to make the test sensitive, rapid and easy to use. Currently, the manufacturers develop LFAs by empirical optimization of material components (e.g., analytical membranes, conjugate pads and sample pads, biological reagents (e.g., antibodies, blocking reagents and buffers and the design of delivery geometry. In this paper, we will review conventional optimization and then focus on the latter and outline analytical tools, such as dynamic light scattering and optical biosensors, as well as methods, such as microfluidic flow design and mechanistic models. We are applying these tools to find non-obvious optima of lateral flow assays for improved sensitivity, specificity and manufacturing robustness.

Effect of virtual analytical chemistry laboratory on enhancing student research skills and practices

Directory of Open Access Journals (Sweden)

Boris Bortnik

2017-12-01

Full Text Available This article aims to determine the effect of a virtual chemistry laboratory on university student achievement. The article describes a model of a laboratory course that includes a virtual component. This virtual component is viewed as a tool of student pre-lab autonomous learning. It presents electronic resources designed for a virtual laboratory and outlines the methodology of e-resource application. To find out how virtual chemistry laboratory affects student scientific literacy, research skills and practices, a pedagogical experiment has been conducted. Student achievement was compared in two learning environments: traditional – in-class hands-on – learning (control group and blended learning – online learning combined with in-person learning (experimental group. The effectiveness of integrating an e-lab in the laboratory study was measured by comparing student lab reports of the two groups. For that purpose, a set of 10 criteria was developed. The experimental and control student groups were also compared in terms of test results and student portfolios. The study showed that the adopted approach blending both virtual and hands-on learning environments has the potential to enhance student research skills and practices in analytical chemistry studies.

Assessment of the safety of injection practices and injection-related procedures in family health units and centers in Alexandria.

Science.gov (United States)

Elhoseeny, Taghareed A; Mourad, Juidan K

2014-08-01

The Safe Injection Global Network (SIGN) developed an intervention strategy for reducing overuse of injections and promoting the administration of safe injections. Tool C--Revised is designed to assess the safety of the most common procedures that puncture the skin within health services. The aim of the study was to assess injection safety within the primary healthcare facilities in Alexandria using Tool C--Revised. A total of 45 family health units and centers in Alexandria were selected by proportional allocation from the eight regions of Alexandria. The Tool C--Revised of the WHO was used for observation of the entire facility, injection practices and injection-related procedures, and sterilization practices. Interview of different health providers and immediate supervisor of injections was carried out. Indicators that reflect risk included: deficiency of alcohol-based hand rub for cleansing hands (13.3%), compliance with hand wash before preparing a procedure (56.9% before injection practices, 61.3% before phlebotomy, and 67.6% before lancet puncture), and wearing a new pair of gloves before new procedures (48.6% before injection practices, 9.7% for phlebotomy, 11.8% for lancet puncture, and 80% for both intravenous injections and infusions). Enough disposable equipment in all facilities for at least 2 weeks dependent on the statement of the average numbers of procedures per week was shown. Only 38% of the providers had received training regarding injection safety in the last 2 years and 62.5% had completed their three doses of hepatitis B vaccine. Only 42.2% of staffs who handled healthcare waste had access to heavy gloves. Indicators related to injection and injection-related practices that reflect risk to patients include deficiency of alcohol-based hand rub tools, nonadherence to hand hygiene before preparing an injection, and inadequate adherence to using a clean barrier when opening a glass ampule and use of gloves. Indicators that may reflect risk to

Applications of instrumental neutron activation analysis in the Analytical Division of the Research Center Juelich (KFA)

International Nuclear Information System (INIS)

Erdtmann, G.

1991-12-01

The Radioanalytical Chemistry Section, as a part of the Central Division of Chemical Analysis of the Research Center KFA Juelich, has the task to provide and to apply nuclear methods in the analytical service for the institutes and projects of the KFA and to customers outside. A great part of this service is trace element determinations by neutron activation analysis using the research reactor FRJ-2. The procedure for the instrumental technique is described and mainly practical aspects are reported in detail. It is based on the k 0 -method developed by Simonits and DeCorte. The results are calculated from the peak areas of the γ-lines and the corresponding k 0 -factors. A new variant of this procedure is required, if the program used for the deconvolution of the γ-spectra provides absolute decay rates of the radionuclides instead of the γ-emission rates. This variant is also described. Some examples of analyses carried out in the analytical service are presented and discussed mainly with respect to accuracy of the results and detection limits. (orig.) [de

An analytical approach to managing complex process problems

Energy Technology Data Exchange (ETDEWEB)

Ramstad, Kari; Andersen, Espen; Rohde, Hans Christian; Tydal, Trine

2006-03-15

The oil companies are continuously investing time and money to ensure optimum regularity on their production facilities. High regularity increases profitability, reduces workload on the offshore organisation and most important; - reduces discharge to air and sea. There are a number of mechanisms and tools available in order to achieve high regularity. Most of these are related to maintenance, system integrity, well operations and process conditions. However, for all of these tools, they will only be effective if quick and proper analysis of fluids and deposits are carried out. In fact, analytical backup is a powerful tool used to maintain optimised oil production, and should as such be given high priority. The present Operator (Hydro Oil and Energy) and the Chemical Supplier (MI Production Chemicals) have developed a cooperation to ensure that analytical backup is provided efficiently to the offshore installations. The Operator's Research and Development (R and D) departments and the Chemical Supplier have complementary specialties in both personnel and equipment, and this is utilized to give the best possible service when required from production technologists or operations. In order for the Operator's Research departments, Health, Safety and Environment (HSE) departments and Operations to approve analytical work performed by the Chemical Supplier, a number of analytical tests are carried out following procedures agreed by both companies. In the present paper, three field case examples of analytical cooperation for managing process problems will be presented. 1) Deposition in a Complex Platform Processing System. 2) Contaminated Production Chemicals. 3) Improved Monitoring of Scale Inhibitor, Suspended Solids and Ions. In each case the Research Centre, Operations and the Chemical Supplier have worked closely together to achieve fast solutions and Best Practice. (author) (tk)

Validation of a new analytical procedure for determination of residual solvents in [{sup 18}F]FDG by gas chromatography

Energy Technology Data Exchange (ETDEWEB)

Costa, Flávia M.; Costa, Cassiano L.S.; Silva, Juliana B.; Ferreira, Soraya M.Z.M.D., E-mail: flaviabiomedica@yahoo.com.br [Centro de Desenvolvimento da Tecnologia Nuclear (UPPR/CDTN/CNEN-MG), Belo Horizonte, MG (Brazil). Unidade de Pesquisa e Produção de Radiofármacos

2017-07-01

Fludeoxyglucose F 18 ([{sup 18}F]FDG) is the most used radiopharmaceutical for positron emission tomography, especially on oncology. Organic solvents such as ether, ethanol and acetonitrile might be used in the synthesis of [{sup 18}F]FDG; however, they might not be completely removed during purification steps. The determination of residual solvents in [{sup 18}F]FDG is required in the European Pharmacopoeia (EP) and the United States Pharmacopeia (USP) monographs. While the procedure described in the EP is quite general, the one described in the USP requires a long runtime (about 13 minutes). In this work a simple and fast (4-minute) analytical procedure was developed and validated for determination of residual solvents in [{sup 18}F]FDG. Analyses were carried out in a Perkin Elmer gas chromatograph equipped with a flame ionization detector. The separation was obtained on a 0.53-mm x 30 m fused-silica column. Validation included the evaluation of various parameters, such as: specificity, linearity and range, limits of detection and quantitation, precision (repeatability and intermediate precision), accuracy, and robustness. Results were found to be within acceptable limits, indicating the developed procedure is suitable for its intended application. Considering the short half-life of fluorine-18 (109.7 minutes), this new method could be a valuable alternative for routine quality control of [{sup 18}F]FDG. (author)

The application of analytical procedures in the audit process: A ...

African Journals Online (AJOL)

kirstam

collected through interviews with senior audit managers at large audit ... providing a perspective of why and how South African auditors apply analytical ... and includes the objectives of each study, the data collection method used, and a ...... 2It is recommended that scholars use the findings of this study to perform further.

A Review of Cash Management Policies, Procedures and Practices of Mississippi's Institutions of Higher Learning.

Science.gov (United States)

Mississippi State Legislature, Jackson. Performance Evaluation and Expenditure Review Committee.

This report to the Mississippi Legislature presents the findings of a review of the cash management policies, procedures, and practices of the State Board of Trustees of Institutions of Higher Learning (IHL). The methodology involved review of: applicable Mississippi statutes; standards promulgated by the National Association of College and…

A Framework for Understanding Physics Students' Computational Modeling Practices

Science.gov (United States)

Lunk, Brandon Robert

their existing physics content knowledge, particularly their knowledge of analytic procedures. While this existing knowledge was often applied in inappropriate circumstances, the students were still able to display a considerable amount of understanding of the physics content and of analytic solution procedures. These observations could not be adequately accommodated by the existing literature of programming comprehension. In extending the resource framework to the task of computational modeling, I model students' practices in terms of three important elements. First, a knowledge base includes re- sources for understanding physics, math, and programming structures. Second, a mechanism for monitoring and control describes students' expectations as being directed towards numerical, analytic, qualitative or rote solution approaches and which can be influenced by the problem representation. Third, a set of solution approaches---many of which were identified in this study---describe what aspects of the knowledge base students use and how they use that knowledge to enact their expectations. This framework allows us as researchers to track student discussions and pinpoint the source of difficulties. This work opens up many avenues of potential research. First, this framework gives researchers a vocabulary for extending Resource Theory to other domains of instruction, such as modeling how physics students use graphs. Second, this framework can be used as the basis for modeling expert physicists' programming practices. Important instructional implications also follow from this research. Namely, as we broaden the use of computational modeling in the physics classroom, our instructional practices should focus on helping students understand the step-by-step nature of programming in contrast to the already salient analytic procedures.

Environmental Measurements Laboratory (EML) procedures manual

International Nuclear Information System (INIS)

Chieco, N.A.; Bogen, D.C.; Knutson, E.O.

1990-11-01

Volume 1 of this manual documents the procedures and existing technology that are currently used by the Environmental Measurements Laboratory. A section devoted to quality assurance has been included. These procedures have been updated and revised and new procedures have been added. They include: sampling; radiation measurements; analytical chemistry; radionuclide data; special facilities; and specifications. 228 refs., 62 figs., 37 tabs. (FL)

Survey of prenatal counselling practices regarding aneuploidy risk modification, invasive diagnostic procedure risks, and procedure eligibility criteria in Canadian centres.

Science.gov (United States)

Hull, Danna; Davies, Gregory; Armour, Christine M

2012-07-01

To explore prenatal practices related to aneuploidy screening, risk modification, and invasive diagnostic procedures across Canadian centres. We conducted a survey of members of the Canadian Association of Genetic Counsellors, the Canadian College of Medical Genetics, and the Canadian Society of Maternal Fetal Medicine, who provide direct counselling or management of prenatal patients in Canada. Eighty-two of 157 respondents indicated that their centre's definition of advanced maternal age was ≥ 35 years, with 33/157 respondents reporting an advanced maternal age definition of ≥ 40 years. The majority of respondents reported that prenatal serum screening for aneuploidy is provincially funded in their province or territory (121/147). The majority of respondents who reported that prenatal screening is not provincially funded (17/147) were from Quebec (14/17). Thirty-nine of 123 respondents reported that their centre defines increased nuchal translucency as ≥ 3.0 mm, whereas 49/123 reported a definition of ≥ 3.5 mm. Sixty-four of 150 respondents reported that the aneuploidy risk provided by serum screening is modified by a soft marker likelihood ratio, whereas 46/150 respondents reported that both age-related and serum screening risks are modified. Fifty-nine of 124 respondents reported that their centre will modify aneuploidy risk after a normal ultrasound; the most commonly cited negative likelihood ratio was 0.5. The most commonly reported procedure-related risk for chorionic villus sampling was 1/100 (123/147) and for amniocentesis was 1/200 (73/142). This study demonstrates inconsistencies in prenatal practices and access to screening programs across Canada. The information gained from this study will inform policy advisors developing prenatal practice guidelines at both the provincial and national levels.

Measuring energy metabolism in the mouse – theoretical, practical and analytical considerations

Directory of Open Access Journals (Sweden)

John Roger Speakman

2013-03-01

Full Text Available The mouse is one of the most important model organisms for understanding human genetic function and disease. This includes characterisation of the factors that influence energy expenditure and dysregulation of energy balance leading to obesity and its sequalae. Measuring energy metabolism in the mouse presents a challenge because the animals are small, and in this respect it presents similar challenges to measuring energy demands in many other species of small mammal. This paper considers some theoretical, practical and analytical considerations to be considered when measuring energy expenditure in mice. Theoretically total daily energy expenditure is comprised of several different components: basal or resting expenditure, physical activity, thermoregulation and the thermic effect of food. Energy expenditure in mice is normally measured using open flow indirect calorimetry apparatus. Two types of system are available – one of which involves a single small Spartan chamber linked to a single analyser, which is ideal for measuring the individual components of energy demand. The other type of system involves a large chamber which mimics the home cage environment and is generally configured with several chambers per analyser. These latter systems are ideal for measuring total daily energy expenditure but at present do not allow accurate decomposition of the total expenditure into its components. The greatest analytical challenge for mouse expenditure data is how to account for body size differences between individuals. This has been a matter of some discussion for at least 120 years. The statistically most appropriate approach is to use ANCOVA with individual aspects of body composition as independent predictors.

Improving the user experience through practical data analytics gain meaningful insight and increase your bottom line

CERN Document Server

Fritz, Mike

2015-01-01

Improving the User Experience through Practical Data Analytics is your must-have resource for making UX design decisions based on data, rather than hunches. Authors Fritz and Berger help the UX professional recognize and understand the enormous potential of the ever-increasing user data that is often accumulated as a by-product of routine UX tasks, such as conducting usability tests, launching surveys, or reviewing clickstream information. Then, step-by-step, they explain how to utilize both descriptive and predictive statistical techniques to gain meaningful insight with that data. You'll be

Sample handling in surface sensitive chemical and biological sensing: a practical review of basic fluidics and analyte transport.

Science.gov (United States)

Orgovan, Norbert; Patko, Daniel; Hos, Csaba; Kurunczi, Sándor; Szabó, Bálint; Ramsden, Jeremy J; Horvath, Robert

2014-09-01

This paper gives an overview of the advantages and associated caveats of the most common sample handling methods in surface-sensitive chemical and biological sensing. We summarize the basic theoretical and practical considerations one faces when designing and assembling the fluidic part of the sensor devices. The influence of analyte size, the use of closed and flow-through cuvettes, the importance of flow rate, tubing length and diameter, bubble traps, pressure-driven pumping, cuvette dead volumes, and sample injection systems are all discussed. Typical application areas of particular arrangements are also highlighted, such as the monitoring of cellular adhesion, biomolecule adsorption-desorption and ligand-receptor affinity binding. Our work is a practical review in the sense that for every sample handling arrangement considered we present our own experimental data and critically review our experience with the given arrangement. In the experimental part we focus on sample handling in optical waveguide lightmode spectroscopy (OWLS) measurements, but the present study is equally applicable for other biosensing technologies in which an analyte in solution is captured at a surface and its presence is monitored. Explicit attention is given to features that are expected to play an increasingly decisive role in determining the reliability of (bio)chemical sensing measurements, such as analyte transport to the sensor surface; the distorting influence of dead volumes in the fluidic system; and the appropriate sample handling of cell suspensions (e.g. their quasi-simultaneous deposition). At the appropriate places, biological aspects closely related to fluidics (e.g. cellular mechanotransduction, competitive adsorption, blood flow in veins) are also discussed, particularly with regard to their models used in biosensing. Copyright © 2014 Elsevier B.V. All rights reserved.

SOLUTION OF SIGNAL UNCERTAINTY PROBLEM AT ANALYTICAL DESIGN OF CONSECUTIVE COMPENSATOR IN PIEZO ACTUATOR CONTROL

Directory of Open Access Journals (Sweden)

S.V. Bystrov

2016-05-01

Full Text Available Subject of Research.We present research results for the signal uncertainty problem that naturally arises for the developers of servomechanisms, including analytical design of serial compensators, delivering the required quality indexes for servomechanisms. Method. The problem was solved with the use of Besekerskiy engineering approach, formulated in 1958. This gave the possibility to reduce requirements for input signal composition of servomechanisms by using only two of their quantitative characteristics, such as maximum speed and acceleration. Information about input signal maximum speed and acceleration allows entering into consideration the equivalent harmonic input signal with calculated amplitude and frequency. In combination with requirements for maximum tracking error, the amplitude and frequency of the equivalent harmonic effects make it possible to estimate analytically the value of the amplitude characteristics of the system by error and then convert it to amplitude characteristic of open-loop system transfer function. While previously Besekerskiy approach was mainly used in relation to the apparatus of logarithmic characteristics, we use this approach for analytical synthesis of consecutive compensators. Main Results. Proposed technique is used to create analytical representation of "input–output" and "error–output" polynomial dynamic models of the designed system. In turn, the desired model of the designed system in the "error–output" form of analytical representation of transfer functions is the basis for the design of consecutive compensator, that delivers the desired placement of state matrix eigenvalues and, consequently, the necessary set of dynamic indexes for the designed system. The given procedure of consecutive compensator analytical design on the basis of Besekerskiy engineering approach under conditions of signal uncertainty is illustrated by an example. Practical Relevance. The obtained theoretical results are

Procedures and practices for abnormal occurrences and emergencies

International Nuclear Information System (INIS)

Blaesig, H.

1986-01-01

This lecture contains the concept of the Emergency Operating Procedures (EOPs) of German power plants. As the procedures depend on the technique of the plant the level of automation and the types of information are described first. After this, the method to diagnose a transient or accident, following entry into an emergency procedure is explained. An overview about the design basis accidents and the aim of the actions in the procedures is given basing on the existing rules and regulations. Finally the theoretical principles are explained taking the corresponding procedures and examples of two German PWRs. (orig.)

Analytical design of proportional-integral controllers for the optimal control of first-order processes with operational constraints

Energy Technology Data Exchange (ETDEWEB)

Thu, Hien Cao Thi; Lee, Moonyong [Yeungnam University, Gyeongsan (Korea, Republic of)

2013-12-15

A novel analytical design method of industrial proportional-integral (PI) controllers was developed for the optimal control of first-order processes with operational constraints. The control objective was to minimize a weighted sum of the controlled variable error and the rate of change in the manipulated variable under the maximum allowable limits in the controlled variable, manipulated variable and the rate of change in the manipulated variable. The constrained optimal servo control problem was converted to an unconstrained optimization to obtain an analytical tuning formula. A practical shortcut procedure for obtaining optimal PI parameters was provided based on graphical analysis of global optimality. The proposed PI controller was found to guarantee global optimum and deal explicitly with the three important operational constraints.

Analytical Chemistry Laboratory (ACL) procedure compendium

International Nuclear Information System (INIS)

1993-01-01

This volume contains the interim change notice for sample preparation methods. Covered are: acid digestion for metals analysis, fusion of Hanford tank waste solids, water leach of sludges/soils/other solids, extraction procedure toxicity (simulate leach in landfill), sample preparation for gamma spectroscopy, acid digestion for radiochemical analysis, leach preparation of solids for free cyanide analysis, aqueous leach of solids for anion analysis, microwave digestion of glasses and slurries for ICP/MS, toxicity characteristic leaching extraction for inorganics, leach/dissolution of activated metal for radiochemical analysis, extraction of single-shell tank (SST) samples for semi-VOC analysis, preparation and cleanup of hydrocarbon- containing samples for VOC and semi-VOC analysis, receiving of waste tank samples in onsite transfer cask, receipt and inspection of SST samples, receipt and extrusion of core samples at 325A shielded facility, cleaning and shipping of waste tank samplers, homogenization of solutions/slurries/sludges, and test sample preparation for bioassay quality control program

Analytical method comparisons for the accurate determination of PCBs in sediments

Energy Technology Data Exchange (ETDEWEB)

Numata, M.; Yarita, T.; Aoyagi, Y.; Yamazaki, M.; Takatsu, A. [National Metrology Institute of Japan, Tsukuba (Japan)

2004-09-15

National Metrology Institute of Japan in National Institute of Advanced Industrial Science and Technology (NMIJ/AIST) has been developing several matrix reference materials, for example, sediments, water and biological tissues, for the determinations of heavy metals and organometallic compounds. The matrix compositions of those certified reference materials (CRMs) are similar to compositions of actual samples, and those are useful for validating analytical procedures. ''Primary methods of measurements'' are essential to obtain accurate and SI-traceable certified values in the reference materials, because the methods have the highest quality of measurement. However, inappropriate analytical operations, such as incomplete extraction of analytes or crosscontamination during analytical procedures, will cause error of analytical results, even if one of the primary methods, isotope-dilution, is utilized. To avoid possible procedural bias for the certification of reference materials, we employ more than two analytical methods which have been optimized beforehand. Because the accurate determination of trace POPs in the environment is important to evaluate their risk, reliable CRMs are required by environmental chemists. Therefore, we have also been preparing matrix CRMs for the determination of POPs. To establish accurate analytical procedures for the certification of POPs, extraction is one of the critical steps as described above. In general, conventional extraction techniques for the determination of POPs, such as Soxhlet extraction (SOX) and saponification (SAP), have been characterized well, and introduced as official methods for environmental analysis. On the other hand, emerging techniques, such as microwave-assisted extraction (MAE), pressurized fluid extraction (PFE) and supercritical fluid extraction (SFE), give higher recovery yields of analytes with relatively short extraction time and small amount of solvent, by reasons of the high

Workplace air monitoring and sampling practices at DOE facilities

International Nuclear Information System (INIS)

Swinth, K.L.; Kenoyer, J.L.; Selby, J.M.

1987-01-01

The Pacific Northwest Laboratory (PNL) surveyed the current air monitoring and sampling practices at U.S. Department of Energy (DOE) facilities as a part of an air monitoring upgrade task. A comprehensive questionnaire was developed and distributed to DOE contractors through the DOE field offices. Twenty-six facilities returned a completed questionnaire. Questionnaire replies indicate a large diversity in air sampling and monitoring practices among DOE facilities. The differences among the facilities exist in monitoring and sampling instrumentation, procedures, calibration, analytical methods, detection levels, and action levels. Many of these differences could be attributed to different operational needs. 5 references, 2 figures, 2 tables

Surface enhanced raman spectroscopy analytical, biophysical and life science applications

CERN Document Server

Schlücker, Sebastian

2013-01-01

Covering everything from the basic theoretical and practical knowledge to new exciting developments in the field with a focus on analytical and life science applications, this monograph shows how to apply surface-enhanced Raman scattering (SERS) for solving real world problems. From the contents: * Theory and practice of SERS * Analytical applications * SERS combined with other analytical techniques * Biophysical applications * Life science applications including various microscopies Aimed at analytical, surface and medicinal chemists, spectroscopists, biophysicists and materials scientists. Includes a Foreword by the renowned Raman spectroscopist Professor Wolfgang Kiefer, the former Editor-in-Chief of the Journal of Raman Spectroscopy.

Play vs. Procedures

DEFF Research Database (Denmark)

Hammar, Emil

Through the theories of play by Gadamer (2004) and Henricks (2006), I will show how the relationship between play and game can be understood as dialectic and disruptive, thus challenging understandings of how the procedures of games determine player activity and vice versa. As such, I posit some...... analytical consequences for understandings of digital games as procedurally fixed (Boghost, 2006; Flannagan, 2009; Bathwaite & Sharp, 2010). That is, if digital games are argued to be procedurally fixed and if play is an appropriative and dialectic activity, then it could be argued that the latter affects...... and alters the former, and vice versa. Consequently, if the appointed procedures of a game are no longer fixed and rigid in their conveyance of meaning, qua the appropriative and dissolving nature of play, then understandings of games as conveying a fixed meaning through their procedures are inadequate...

A Model of Risk Analysis in Analytical Methodology for Biopharmaceutical Quality Control.

Science.gov (United States)

Andrade, Cleyton Lage; Herrera, Miguel Angel De La O; Lemes, Elezer Monte Blanco

2018-01-01

One key quality control parameter for biopharmaceutical products is the analysis of residual cellular DNA. To determine small amounts of DNA (around 100 pg) that may be in a biologically derived drug substance, an analytical method should be sensitive, robust, reliable, and accurate. In principle, three techniques have the ability to measure residual cellular DNA: radioactive dot-blot, a type of hybridization; threshold analysis; and quantitative polymerase chain reaction. Quality risk management is a systematic process for evaluating, controlling, and reporting of risks that may affects method capabilities and supports a scientific and practical approach to decision making. This paper evaluates, by quality risk management, an alternative approach to assessing the performance risks associated with quality control methods used with biopharmaceuticals, using the tool hazard analysis and critical control points. This tool provides the possibility to find the steps in an analytical procedure with higher impact on method performance. By applying these principles to DNA analysis methods, we conclude that the radioactive dot-blot assay has the largest number of critical control points, followed by quantitative polymerase chain reaction, and threshold analysis. From the analysis of hazards (i.e., points of method failure) and the associated method procedure critical control points, we conclude that the analytical methodology with the lowest risk for performance failure for residual cellular DNA testing is quantitative polymerase chain reaction. LAY ABSTRACT: In order to mitigate the risk of adverse events by residual cellular DNA that is not completely cleared from downstream production processes, regulatory agencies have required the industry to guarantee a very low level of DNA in biologically derived pharmaceutical products. The technique historically used was radioactive blot hybridization. However, the technique is a challenging method to implement in a quality

Practical experimental certification of computational quantum gates using a twirling procedure.

Science.gov (United States)

Moussa, Osama; da Silva, Marcus P; Ryan, Colm A; Laflamme, Raymond

2012-08-17

Because of the technical difficulty of building large quantum computers, it is important to be able to estimate how faithful a given implementation is to an ideal quantum computer. The common approach of completely characterizing the computation process via quantum process tomography requires an exponential amount of resources, and thus is not practical even for relatively small devices. We solve this problem by demonstrating that twirling experiments previously used to characterize the average fidelity of quantum memories efficiently can be easily adapted to estimate the average fidelity of the experimental implementation of important quantum computation processes, such as unitaries in the Clifford group, in a practical and efficient manner with applicability in current quantum devices. Using this procedure, we demonstrate state-of-the-art coherent control of an ensemble of magnetic moments of nuclear spins in a single crystal solid by implementing the encoding operation for a 3-qubit code with only a 1% degradation in average fidelity discounting preparation and measurement errors. We also highlight one of the advances that was instrumental in achieving such high fidelity control.

Analytical validation of an ultraviolet-visible procedure for determining lutein concentration and application to lutein-loaded nanoparticles.

Science.gov (United States)

Silva, Jéssica Thaís do Prado; Silva, Anderson Clayton da; Geiss, Julia Maria Tonin; de Araújo, Pedro Henrique Hermes; Becker, Daniela; Bracht, Lívia; Leimann, Fernanda Vitória; Bona, Evandro; Guerra, Gustavo Petri; Gonçalves, Odinei Hess

2017-09-01

Lutein is a carotenoid presenting known anti-inflammatory and antioxidant properties. Lutein-rich diets have been associated with neurological improvement as well as reduction of the risk of vision loss due to Age-Related Macular Degeneration (AMD). Micro and nanoencapsulation have demonstrated to be effective techniques in protecting lutein against degradation and also in improving its bioavailability. However, actual lutein concentration inside the capsules and encapsulation efficiency are key parameters that must be precisely known when designing in vitro and in vivo tests. In this work an analytical procedure was validated for the determination of the actual lutein content in zein nanoparticles using ultraviolet-visible spectroscopy. Method validation followed the International Conference on Harmonisation (ICH) guidelines which evaluate linearity, detection limit, quantification limit, accuracy and precision. The validated methodology was applied to characterize lutein-loaded nanoparticles. Copyright © 2017 Elsevier Ltd. All rights reserved.

RADCHEM - Radiochemical procedures for the determination of Sr, U, Pu, Am and Cm

Energy Technology Data Exchange (ETDEWEB)

Sidhu, R. [Inst. for Energy Technology (Norway)

2006-04-15

An accurate determination of radionuclides from various sources in the environment is essential for assessment of the potential hazards and suitable countermeasures both in case of accidents, authorised release and routine surveillance. Reliable radiochemical separation and detection techniques are needed for accurate determination of alpha and beta emitters. Rapid analytical methods are needed in case of an accident for early decision-making. The objective of this project has been to compare and evaluate radiochemical procedures used at Nordic laboratories for the determination of strontium, uranium, plutonium, americium and curium. To gather detailed information on the procedures in use, a questionnaire regarding various aspects of radionuclide determination was developed and distributed to all (sixteen) relevant laboratories in the Nordic countries. The response and the procedures used by each laboratory were then discussed between those who answered the questionnaire. This report summaries the findings and gives recommendation on suitable practice. (au)

RADCHEM - Radiochemical procedures for the determination of Sr, U, Pu, Am and Cm

International Nuclear Information System (INIS)

Sidhu, R.

2006-04-01

An accurate determination of radionuclides from various sources in the environment is essential for assessment of the potential hazards and suitable countermeasures both in case of accidents, authorised release and routine surveillance. Reliable radiochemical separation and detection techniques are needed for accurate determination of alpha and beta emitters. Rapid analytical methods are needed in case of an accident for early decision-making. The objective of this project has been to compare and evaluate radiochemical procedures used at Nordic laboratories for the determination of strontium, uranium, plutonium, americium and curium. To gather detailed information on the procedures in use, a questionnaire regarding various aspects of radionuclide determination was developed and distributed to all (sixteen) relevant laboratories in the Nordic countries. The response and the procedures used by each laboratory were then discussed between those who answered the questionnaire. This report summaries the findings and gives recommendation on suitable practice. (au)

Atmospheric Deposition: Sampling Procedures, Analytical Methods, and Main Recent Findings from the Scientific Literature

Directory of Open Access Journals (Sweden)

M. Amodio

2014-01-01

Full Text Available The atmosphere is a carrier on which some natural and anthropogenic organic and inorganic chemicals are transported, and the wet and dry deposition events are the most important processes that remove those chemicals, depositing it on soil and water. A wide variety of different collectors were tested to evaluate site-specificity, seasonality and daily variability of settleable particle concentrations. Deposition fluxes of POPs showed spatial and seasonal variations, diagnostic ratios of PAHs on deposited particles, allowed the discrimination between pyrolytic or petrogenic sources. Congener pattern analysis and bulk deposition fluxes in rural sites confirmed long-range atmospheric transport of PCDDs/Fs. More and more sophisticated and newly designed deposition samplers have being used for characterization of deposited mercury, demonstrating the importance of rain scavenging and the relatively higher magnitude of Hg deposition from Chinese anthropogenic sources. Recently biological monitors demonstrated that PAH concentrations in lichens were comparable with concentrations measured in a conventional active sampler in an outdoor environment. In this review the authors explore the methodological approaches used for the assessment of atmospheric deposition, from the analysis of the sampling methods, the analytical procedures for chemical characterization of pollutants and the main results from the scientific literature.

Coding for urologic office procedures.

Science.gov (United States)

Dowling, Robert A; Painter, Mark

2013-11-01

This article summarizes current best practices for documenting, coding, and billing common office-based urologic procedures. Topics covered include general principles, basic and advanced urologic coding, creation of medical records that support compliant coding practices, bundled codes and unbundling, global periods, modifiers for procedure codes, when to bill for evaluation and management services during the same visit, coding for supplies, and laboratory and radiology procedures pertinent to urology practice. Detailed information is included for the most common urology office procedures, and suggested resources and references are provided. This information is of value to physicians, office managers, and their coding staff. Copyright © 2013 Elsevier Inc. All rights reserved.

Procedures for determination of 239,240Pu, 241Am, 237Np, 234,238U, 228,230,232Th, 99Tc and 210Pb-210Po in environmental material

International Nuclear Information System (INIS)

Kolstad, A. K.; Lind, B.; QingJiang Chen; Aarkrog, A.; Nielsen, S.P.; Dahlgaard, H.; Yixuan Yu

2001-12-01

Since 1987, the Department of Nuclear Safety Research, Risoe National Laboratory has developed procedures for analysis of low-level amounts of radioactivity in large samples of 200 liters seawater, 10 gram sediment, soil and other environmental materials. These analytical procedures provide high chemical yields, good resolution and excellent decontamination factors for large environmental samples analysed by alpha spectrometry and mass spectrometry (ICPMS). The procedures have been checked through practical analysis work and are used in Norway, the Netherlands, Germany, Spain, France and Denmark. (au)

Optimization of organic contaminant and toxicity testing analytical procedures for estimating the characteristics and environmental significance of natural gas processing plant waste sludges

International Nuclear Information System (INIS)

Novak, N.

1990-10-01

The Gas Plant Sludge Characterization Phase IIB program is a continuation of the Canadian Petroleum Association's (CPA) initiatives to characterize sludge generated at gas processing plants. The objectives of the Phase IIB project were to develop an effective procedure for screening waste sludges or centrifuge/leachate generated from sludge samples for volatile, solvent-soluble and water-soluble organics; verify the reproducibility of the three aquatic toxicity tests recommended as the battery of tests for determining the environmental significance of sludge centrifugates or leachates; assess the performance of two terrestrial toxicity tests in determining the environmental significance of whole sludge samples applied to soil; and to assess and discuss the reproducibility and cost-effectiveness of the sampling and analytical techniques proposed for the overall sludge characterization procedure. Conclusions and recommendations are provided for sludge collection, preparation and distribution, organic analyses, toxicity testing, project management, and procedure standardization. The three aquatic and two terrestrial toxicity tests proved effective in indicating the toxicity of complex mixtures. 27 refs., 3 figs., 59 tabs

Development Procedure in Mutation Induction and Tracer Technique for Good Agriculture Practices for Under used Crops

International Nuclear Information System (INIS)

Faiz Ahmad; Rusli Ibrahim; Khairuddin Abdul Rahim

2015-01-01

Under used crops are those crop species which have high potential value in the supply of important raw material for secondary economy sector in food processing. The yield production of new Under used crops varieties can be used as an important input in food production process for export products. The optimum production cost can be minimized since the price of raw material supplied from agriculture sector is cheaper compared with the international markets. Agriculture output can be increased through the development of Under used crops using radiation mutagenesis and tracer technique for good agricultural practices. This paper work will discuss the development procedure of mutation induction method which includes irradiation of samples such as seeds of groundnut and in vitro shoots of banana using gamma rays and application of N-15 for nutrient use efficiency and screening of potential mutant lines with high yield and resistance to drought. These management practices using established procedures of water and nutrient use efficiency will be recommended to the growers. (author)

Practicality of diversion path analysis

International Nuclear Information System (INIS)

Murphey, W.M.; Schleter, J.C.

1974-07-01

One can define the safeguards system for nuclear material as the set of all protective actions taken to prevent or to deter attempts to divert nuclear material to unauthorized use. Maintenance of effective safeguards requires a program for routine assessment of plant safeguards systems in terms of their capabilities to satisfy safeguards aims. Plant internal control systems provide capabilities for detection of unprevented diversion and can provide assurance that diversion has not occurred. A procedure called Diversion Path Analysis (DPA) enables routine assessment of the capabilities of internal control systems in this regard and identification of safeguards problem areas in a plant. A framework for safeguards system design is also provided which will allow flexibility to accommodate individual plant circumstances while maintaining acceptable diversion detection capability. The steps of the procedure are described and the practicality of the analytical method is shown by referring to a demonstration test for a high throughput process where plant personnel were major participants. The boundary conditions for the demonstration case are given, along with some conclusions about the general procedure. (U.S.)

A procedure for the analysis of errors of commission in a Probabilistic Safety Assessment of a nuclear power plant at full power

International Nuclear Information System (INIS)

Julius, J.; Jorgenson, E.; Parry, G.W.; Mosleh, A.M.

1995-01-01

This paper describes an analytical procedure that has been developed to facilitate the identification of errors of commission for inclusion in a Probabilistic Safety Assessment (PSA) of a nuclear power plant operating at full power. The procedure first identifies the opportunities for error by determining when operators are required to intervene to bring the plant to a safe condition following a transient, and then identifying under what conditions this is likely to occur using a model of the causes of error. In order to make the analysis practicable, a successive screening approach is used to identify those errors with the highest potential of occurrence. The procedure has been applied as part of a PSA study, and the results of that application are summarized. For the particular plant to which the procedure was applied, the conclusion was that, because of the nature of the procedures, the high degree of redundancy in the instrumentation, the operating practices, and the control board layouts, the potential for significant errors of commission is low

Theoretical, analytical, and statistical interpretation of environmental data

International Nuclear Information System (INIS)

Lombard, S.M.

1974-01-01

The reliability of data from radiochemical analyses of environmental samples cannot be determined from nuclear counting statistics alone. The rigorous application of the principles of propagation of errors, an understanding of the physics and chemistry of the species of interest in the environment, and the application of information from research on the analytical procedure are all necessary for a valid estimation of the errors associated with analytical results. The specific case of the determination of plutonium in soil is considered in terms of analytical problems and data reliability. (U.S.)

Guided-inquiry laboratory experiments to improve students' analytical thinking skills

Science.gov (United States)

Wahyuni, Tutik S.; Analita, Rizki N.

2017-12-01

This study aims to improve the experiment implementation quality and analytical thinking skills of undergraduate students through guided-inquiry laboratory experiments. This study was a classroom action research conducted in three cycles. The study has been carried out with 38 undergraduate students of the second semester of Biology Education Department of State Islamic Institute (SII) of Tulungagung, as a part of Chemistry for Biology course. The research instruments were lesson plans, learning observation sheets and undergraduate students' experimental procedure. Research data were analyzed using quantitative-descriptive method. The increasing of analytical thinking skills could be measured using gain score normalized and statistical paired t-test. The results showed that guided-inquiry laboratory experiments model was able to improve both the experiment implementation quality and the analytical thinking skills. N-gain score of the analytical thinking skills was increased, in spite of just 0.03 with low increase category, indicated by experimental reports. Some of undergraduate students have had the difficulties in detecting the relation of one part to another and to an overall structure. The findings suggested that giving feedback the procedural knowledge and experimental reports were important. Revising the experimental procedure that completed by some scaffolding questions were also needed.

Developing Healthcare Data Analytics APPs with Open Data Science Tools.

Science.gov (United States)

Hao, Bibo; Sun, Wen; Yu, Yiqin; Xie, Guotong

2017-01-01

Recent advances in big data analytics provide more flexible, efficient, and open tools for researchers to gain insight from healthcare data. Whilst many tools require researchers to develop programs with programming languages like Python, R and so on, which is not a skill set grasped by many researchers in the healthcare data analytics area. To make data science more approachable, we explored existing tools and developed a practice that can help data scientists convert existing analytics pipelines to user-friendly analytics APPs with rich interactions and features of real-time analysis. With this practice, data scientists can develop customized analytics pipelines as APPs in Jupyter Notebook and disseminate them to other researchers easily, and researchers can benefit from the shared notebook to perform analysis tasks or reproduce research results much more easily.

The guideline and practical procedures for earthquake-resistant design of nuclear power plants in Japan

International Nuclear Information System (INIS)

Watabe, M.

1985-01-01

The Guideline for the aseismic design of nuclear reactor facilities, revised in 1981, is introduced. The basic philosophy entails structural integrity against a major earthquake, rigid structure for less deformation and foundation on rock. The classification of facilities is then explained. Some practical examples are tabulated. In the light of the above classifications, evaluation procedures for aseismic design are defined. Design basis earthquake ground motions, S1 and S2, are defined. S1 is the maximum possible earthquake ground motion, while S2 is the maximum credible one. The relation between active faults and S1, S2 motions is explained, seismic forces induced by S1 and S2 are expressed in terms of response spectra. Static seismic coefficient procedures are also applied to evaluate seismic forces, as a minimum guide-line based on dynamic analysis. Combinations of seismic forces and allowable limits are then explained. In the second part of the paper, seismic analysis for reactor buildings as a part of design practice is outlined. There are three major key points in practical aseismic design. The first one is input design earthquake motions, in which soil/foundation interaction problems are also included. In practice, ground motions at the free field rock surface have to be convoluted or deconvoluted to obtain base rock motions, which are applied to estimate input design earthquake motions by way of finite element analysis or a lumped mass lattice model. Also introduced is dynamic modelling of the reactor building with its non-linear behaviour represented by plastic deformation of reinforced concrete members as well as by uplift characteristics of foundations. Then an evaluation of aseismic safety is introduced. (author)

A sensitive analytical procedure for monitoring acrylamide in environmental water samples by offline SPE-UPLC/MS/MS.

Science.gov (United States)

Togola, Anne; Coureau, Charlotte; Guezennec, Anne-Gwenaëlle; Touzé, Solène

2015-05-01

The presence of acrylamide in natural systems is of concern from both environmental and health points of view. We developed an accurate and robust analytical procedure (offline solid phase extraction combined with UPLC/MS/MS) with a limit of quantification (20 ng L(-1)) compatible with toxicity threshold values. The optimized (considering the nature of extraction phases, sampling volumes, and solvent of elution) solid phase extraction (SPE) was validated according to ISO Standard ISO/IEC 17025 on groundwater, surface water, and industrial process water samples. Acrylamide is highly polar, which induces a high variability during the SPE step, therefore requiring the use of C(13)-labeled acrylamide as an internal standard to guarantee the accuracy and robustness of the method (uncertainty about 25 % (k = 2) at limit of quantification level). The specificity of the method and the stability of acrylamide were studied for these environmental media, and it was shown that the method is suitable for measuring acrylamide in environmental studies.

IBM Watson Analytics: Automating Visualization, Descriptive, and Predictive Statistics.

Science.gov (United States)

Hoyt, Robert Eugene; Snider, Dallas; Thompson, Carla; Mantravadi, Sarita

2016-10-11

We live in an era of explosive data generation that will continue to grow and involve all industries. One of the results of this explosion is the need for newer and more efficient data analytics procedures. Traditionally, data analytics required a substantial background in statistics and computer science. In 2015, International Business Machines Corporation (IBM) released the IBM Watson Analytics (IBMWA) software that delivered advanced statistical procedures based on the Statistical Package for the Social Sciences (SPSS). The latest entry of Watson Analytics into the field of analytical software products provides users with enhanced functions that are not available in many existing programs. For example, Watson Analytics automatically analyzes datasets, examines data quality, and determines the optimal statistical approach. Users can request exploratory, predictive, and visual analytics. Using natural language processing (NLP), users are able to submit additional questions for analyses in a quick response format. This analytical package is available free to academic institutions (faculty and students) that plan to use the tools for noncommercial purposes. To report the features of IBMWA and discuss how this software subjectively and objectively compares to other data mining programs. The salient features of the IBMWA program were examined and compared with other common analytical platforms, using validated health datasets. Using a validated dataset, IBMWA delivered similar predictions compared with several commercial and open source data mining software applications. The visual analytics generated by IBMWA were similar to results from programs such as Microsoft Excel and Tableau Software. In addition, assistance with data preprocessing and data exploration was an inherent component of the IBMWA application. Sensitivity and specificity were not included in the IBMWA predictive analytics results, nor were odds ratios, confidence intervals, or a confusion matrix

Practical applications of the R6 leak-before-break procedure

International Nuclear Information System (INIS)

Bouchard, P.J.

1997-01-01

A forthcoming revision to the R6 Leak-before-Break Assessment Procedure is briefly described. Practical application of the LbB concepts to safety-critical nuclear plant is illustrated by examples covering both low temperature and high temperature (>450 degrees C) operating regimes. The examples highlight a number of issues which can make the development of a satisfactory LbB case problematic: for example, coping with highly loaded components, methodology assumptions and the definition of margins, the effect of crack closure owing to weld residual stresses, complex thermal stress fields or primary bending fields, the treatment of locally high stresses at crack intersections with free surfaces, the choice of local limit load solution when predicting ligament breakthrough, and the scope of calculations required to support even a simplified LbB case for high temperature steam pipe-work systems

Practical applications of the R6 leak-before-break procedure

Energy Technology Data Exchange (ETDEWEB)

Bouchard, P.J.

1997-04-01

A forthcoming revision to the R6 Leak-before-Break Assessment Procedure is briefly described. Practical application of the LbB concepts to safety-critical nuclear plant is illustrated by examples covering both low temperature and high temperature (>450{degrees}C) operating regimes. The examples highlight a number of issues which can make the development of a satisfactory LbB case problematic: for example, coping with highly loaded components, methodology assumptions and the definition of margins, the effect of crack closure owing to weld residual stresses, complex thermal stress fields or primary bending fields, the treatment of locally high stresses at crack intersections with free surfaces, the choice of local limit load solution when predicting ligament breakthrough, and the scope of calculations required to support even a simplified LbB case for high temperature steam pipe-work systems.

Analytic Potentials for Realistic Electrodes

International Nuclear Information System (INIS)

Barlow, Stephan E.; Taylor, Aimee E.; Swanson, Kenneth R.

2002-01-01

Finite difference algorithms are widely used to numerically solve Laplace's equation for electrode structures that are not amendable to analytic treatment. This includes essentially all real situations. However, in many cases, it is desirable to have the solution in an analytic form. A common practice is to 'fit' the numerical solution either by least squares or cubic spline approach. Neither of these approaches is really accurate, nor do they produce unique results. These limitations are avoided by our approach.

Standardizing the practice of human reliability analysis

International Nuclear Information System (INIS)

Hallbert, B.P.

1993-01-01

The practice of human reliability analysis (HRA) within the nuclear industry varies greatly in terms of posited mechanisms that shape human performance, methods of characterizing and analytically modeling human behavior, and the techniques that are employed to estimate the frequency with which human error occurs. This variation has been a source of contention among HRA practitioners regarding the validity of results obtained from different HRA methods. It has also resulted in attempts to develop standard methods and procedures for conducting HRAs. For many of the same reasons, the practice of HRA has not been standardized or has been standardized only to the extent that individual analysts have developed heuristics and consistent approaches in their practice of HRA. From the standpoint of consumers and regulators, this has resulted in a lack of clear acceptance criteria for the assumptions, modeling, and quantification of human errors in probabilistic risk assessments

A semi-analytical modelling of multistage bunch compression with collective effects

International Nuclear Information System (INIS)

Zagorodnov, Igor; Dohlus, Martin

2010-07-01

In this paper we introduce an analytical solution (up to the third order) for a multistage bunch compression and acceleration system without collective effects. The solution for the system with collective effects is found by an iterative procedure based on this analytical result. The developed formalism is applied to the FLASH facility at DESY. Analytical estimations of RF tolerances are given. (orig.)

A semi-analytical modelling of multistage bunch compression with collective effects

Energy Technology Data Exchange (ETDEWEB)

Zagorodnov, Igor; Dohlus, Martin

2010-07-15

In this paper we introduce an analytical solution (up to the third order) for a multistage bunch compression and acceleration system without collective effects. The solution for the system with collective effects is found by an iterative procedure based on this analytical result. The developed formalism is applied to the FLASH facility at DESY. Analytical estimations of RF tolerances are given. (orig.)

Application of data processing in technological procedures for Dolni Rozinka uranium mines

International Nuclear Information System (INIS)

Sterzel, J.; Havelka, J.; Chrast, M.

1987-01-01

A program was written for technological procedures for mining operations, driving of horizontal workings, driving of raises, boring of long survey boreholes, driving of wide workings, and for working support withdrawal. Each of the said types of technological procedures is specific as concerns data and different information contents but the basic configuration is the same. The procedure is divided into three parts. Part one shows basic data on the working and technological operations from which wages are calculated and material is inventoried. Part two offers necessary information on retreat paths, special duties during blasting operations, during material handling, and all other information required by safety specifications. Part three consists of a signature list containing the names of the team of the given section and of the area foremen, and approval columns. The programs are written in COBOL-DOS/4 allowing the operation of up to 30 remote terminals of the EC 7920 type. The advantage of the computer-assisted production of technological procedures is the possibility of using the technological procedures already defined for the production of new technological procedures, this by a mere change in parameters. The data base is also a source for analytical activities of practically all production units. (J.B.)

Control Chart on Semi Analytical Weighting

Science.gov (United States)

Miranda, G. S.; Oliveira, C. C.; Silva, T. B. S. C.; Stellato, T. B.; Monteiro, L. R.; Marques, J. R.; Faustino, M. G.; Soares, S. M. V.; Ulrich, J. C.; Pires, M. A. F.; Cotrim, M. E. B.

2018-03-01

Semi-analytical balance verification intends to assess the balance performance using graphs that illustrate measurement dispersion, trough time, and to demonstrate measurements were performed in a reliable manner. This study presents internal quality control of a semi-analytical balance (GEHAKA BG400) using control charts. From 2013 to 2016, 2 weight standards were monitored before any balance operation. This work intended to evaluate if any significant difference or bias were presented on weighting procedure over time, to check the generated data reliability. This work also exemplifies how control intervals are established.

New trends in analytical chemistry. Volume 2

International Nuclear Information System (INIS)

Zyka, J.

1984-01-01

The book consists of 8 chapters and describes modern methods of analytical chemistry. The chapters Moessbauer spectroscopy, Neutron activation analysis, and Analytical uses of particle-induced characteristic X radiation (PIXE) describe the principles of these methods, the used experimental equip=-ment, methods of evaluation, modification of methods and examples of practical uses. (M.D.)

Design Procedure for High-Speed PM Motors Aided by Optimization Algorithms

Directory of Open Access Journals (Sweden)

Francesco Cupertino

2018-02-01

Full Text Available This paper considers the electromagnetic and structural co-design of superficial permanent magnet synchronous machines for high-speed applications, with the aid of a Pareto optimization procedure. The aim of this work is to present a design procedure for the afore-mentioned machines that relies on the combined used of optimization algorithms and finite element analysis. The proposed approach allows easy analysis of the results and a lowering of the computational burden. The proposed design method is presented through a practical example starting from the specifications of an aeronautical actuator. The design procedure is based on static finite element simulations for electromagnetic analysis and on analytical formulas for structural design. The final results are validated through detailed transient finite element analysis to verify both electromagnetic and structural performance. The step-by-step presentation of the proposed design methodology allows the reader to easily adapt it to different specifications. Finally, a comparison between a distributed-winding (24 slots and a concentrated-winding (6 slots machine is presented demonstrating the advantages of the former winding arrangement for high-speed applications.

Analytical approximations for wide and narrow resonances

International Nuclear Information System (INIS)

Suster, Luis Carlos; Martinez, Aquilino Senra; Silva, Fernando Carvalho da

2005-01-01

This paper aims at developing analytical expressions for the adjoint neutron spectrum in the resonance energy region, taking into account both narrow and wide resonance approximations, in order to reduce the numerical computations involved. These analytical expressions, besides reducing computing time, are very simple from a mathematical point of view. The results obtained with this analytical formulation were compared to a reference solution obtained with a numerical method previously developed to solve the neutron balance adjoint equations. Narrow and wide resonances of U 238 were treated and the analytical procedure gave satisfactory results as compared with the reference solution, for the resonance energy range. The adjoint neutron spectrum is useful to determine the neutron resonance absorption, so that multigroup adjoint cross sections used by the adjoint diffusion equation can be obtained. (author)

Analytical approximations for wide and narrow resonances

Energy Technology Data Exchange (ETDEWEB)

Suster, Luis Carlos; Martinez, Aquilino Senra; Silva, Fernando Carvalho da [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Programa de Engenharia Nuclear]. E-mail: aquilino@lmp.ufrj.br

2005-07-01

This paper aims at developing analytical expressions for the adjoint neutron spectrum in the resonance energy region, taking into account both narrow and wide resonance approximations, in order to reduce the numerical computations involved. These analytical expressions, besides reducing computing time, are very simple from a mathematical point of view. The results obtained with this analytical formulation were compared to a reference solution obtained with a numerical method previously developed to solve the neutron balance adjoint equations. Narrow and wide resonances of U{sup 238} were treated and the analytical procedure gave satisfactory results as compared with the reference solution, for the resonance energy range. The adjoint neutron spectrum is useful to determine the neutron resonance absorption, so that multigroup adjoint cross sections used by the adjoint diffusion equation can be obtained. (author)

From Theory Use to Theory Building in Learning Analytics: A Commentary on "Learning Analytics to Support Teachers during Synchronous CSCL"

Science.gov (United States)

Chen, Bodong

2015-01-01

In this commentary on Van Leeuwen (2015, this issue), I explore the relation between theory and practice in learning analytics. Specifically, I caution against adhering to one specific theoretical doctrine while ignoring others, suggest deeper applications of cognitive load theory to understanding teaching with analytics tools, and comment on…

Analytic chemistry of molybdenum

International Nuclear Information System (INIS)

Parker, G.A.

1983-01-01

Electrochemical, colorimetric, gravimetric, spectroscopic, and radiochemical methods for the determination of molybdenum are summarized in this book. Some laboratory procedures are described in detail while literature citations are given for others. The reader is also referred to older comprehensive reviews of the analytical chemistry of molybdenum. Contents, abridged: Gravimetric methods. Titrimetric methods. Colorimetric methods. X-ray fluorescence. Voltammetry. Catalytic methods. Molybdenum in non-ferrous alloys. Molydbenum compounds

Towards a new analytical approach to the challenges of communication difficulties and aquired brain damage in everyday practices

DEFF Research Database (Denmark)

Klemmensen, Charlotte Marie Bisgaard

part of where the participants mainly are persons with acquired brain damage and occupational therapists. I will discuss how a new approach to sense-making practice may be designed in order to study more closely a participants’ perspective in unique situations as they arise. I am interested......The approach of language psychology is grounded in the persons communicating; where as the approach of discursive psychology is grounded in social interaction. There is a lack of scientific knowledge on the social/communicative/interactional challenges of communication difficulties and brain injury...... in everyday life. A sense-making-in-practice approach may help form a new discourse. How may a new analytical approach be designed? May ‘communication’ be described as ‘participation abilities’, using the framework from language psychology combined with discursive psychology and the conventions...

Nuclear Regulatory Commission Staff practice and procedure digest. Commission, Appeal Board and Licensing Board Decision, July 1972 - June 1995

International Nuclear Information System (INIS)

1996-04-01

This is the seventh edition of the Nuclear Regulatory Commission (NRC) Staff Practice and Procedure Digest. It contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period from July 1, 1972 to June 1995 interpreting the NRC rules of practice in 10 CFR part 2

Procedures for treating common cause failures in safety and reliability studies: Analytical background and techniques

International Nuclear Information System (INIS)

Mosleh, A.; Fleming, K.N.; Parry, G.W.; Paula, H.M.; Worledge, D.H.; Rasmuson, D.M.

1989-01-01

Volume I of this report presents a framework for the inclusion of the impact of common cause failures in risk and reliability evaluations. Common cause failures are defined as that subset of dependent failures for which causes are not explicitly included in the logic model as basic events. The emphasis here is on providing procedures for a practical, systematic approach that can be used to perform and clearly document the analysis. The framework and the methods discussed for performing the different stages of the analysis integrate insights obtained from engineering assessments of the system and the historical evidence from multiple failure events into a systematic, reproducible, and defensible analysis. This document, Volume 2, contains a series of appendices that provide additional background and methodological detail on several important topics discussed in Volume I

United States Nuclear Regulatory Commission staff practice and procedure digest

International Nuclear Information System (INIS)

1991-02-01

This Revision 9 of the fifth edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period from July 1, 1972 to September 30, 1990 interpreting the NRC's Rules of Practice in 10 CFR Part 2. This Revision 9 replaces in part earlier editions and revisions and includes appropriate changes reflecting the amendments to the Rules of Practice effective through September 30, 1990. This edition of the Digest was prepared by attorneys from Aspen Systems Corporation pursuant to Contract number 18-89-346. Persons using this Digest are placed on notice that it may not be used as an authoritative citation in support of any position before the Commission or any of its adjudicatory tribunals. Persons using this Digest are also placed on notice that it is intended for use only as an initial research tool, that it may, and likely does, contain errors, including errors in analysis and interpretation of decisions, and that the user should not rely on the Digest analyses and interpretations but must read, analyze and rely on the user's own analysis of the actual Commission, Appeal Board and Licensing Board decisions cited. Further, neither the United States, the Nuclear Regulatory Commission, Aspen Systems Corporation, nor any of their employees makes any expressed or implied warranty or assumes liability or responsibility for the accuracy, completeness or usefulness of any material presented in the Digest. The Digest is roughly structured in accordance with the chronological sequence of the nuclear facility licensing process as set forth in Appendix A to 10 CFR Part 2. Those decisions which did not fit into that structure are dealt with in a section on general matters. Where appropriate, particular decisions are indexed under more than one heading. (JF)

The practice of internal medicine in Europe: organisation, clinical conditions and procedures.

Science.gov (United States)

Cranston, Mark; Semple, Colin; Duckitt, Roger; Vardi, Moshe; Lindgren, Stefan; Davidson, Christopher; Palsson, Runolfur

2013-10-01

Current information on the role of internists in the European countries is scarce. This report describes the results of a survey of the practice of internists in Europe. Two online questionnaire-based surveys were carried out by the European Board of Internal Medicine, one on the practice of internists and the other on postgraduate training in internal medicine. The national internal medicine societies of all 30 member countries of the European Federation of Internal Medicine were invited to participate. The responses were reviewed by internal medicine trainees from the respective countries and summaries of the data were sent to the national societies for approval. Descriptive analysis of the data on the practice of internists was carried out. Twenty-seven countries (90%) completed the questionnaire and approved their datasets. In 8 European countries, most internists practised internal medicine alone and in 7 countries at least half of physicians practised internal medicine together with a subspecialty. Internal medicine was considered a hospital-based specialty in most countries. The majority of selected presenting problems and diagnoses were rated as commonly encountered in all countries. More variability between countries was observed in the performance of diagnostic and therapeutic procedures. Many similarities exist in the practice of internal medicine between the European countries, while some differences are present that likely reflect the variable impact of subspecialisation. The results of the survey should prove valuable for the definition of specific competencies and development of a common curriculum for internal medicine at the European level. © 2013.

Analytical procedures for identifying anthocyanins in natural extracts

International Nuclear Information System (INIS)

Marco, Paulo Henrique; Poppi, Ronei Jesus; Scarminio, Ieda Spacino

2008-01-01

Anthocyanins are among the most important plant pigments. Due to their potential benefits for human health, there is considerable interest in these natural pigments. Nonetheless, there is great difficulty in finding a technique that could provide the identification of structurally similar compounds and estimate the number and concentration of the species present. A lot of techniques have been tried to find the best methodology to extract information from these systems. In this paper, a review of the most important procedures is given, from the extraction to the identification of anthocyanins in natural extracts. (author)

Manual of Standard Operating Procedures for Veterinary Drug Residue Analysis

International Nuclear Information System (INIS)

2016-01-01

Laboratories are crucial to national veterinary drug residue monitoring programmes. However, one of the main challenges laboratories encounter is obtaining access to relevant methods of analysis. Thus, in addition to training, providing technical advice and transferring technology, the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture has resolved to develop clear and practical manuals to support Member State laboratories. The Coordinated Research Project (CRP) on Development of Radiometric and Allied Analytical Methods to Strengthen Residue Control Programs for Antibiotic and Anthelmintic Veterinary Drug Residues has developed a number of analytical methods as standard operating procedures (SOPs), which are now compiled here. This publication contains SOPs on chromatographic and spectrometric techniques, as well as radioimmunoassay and associated screening techniques, for various anthelmintic and antimicrobial veterinary drug residue analysis. Some analytical method validation protocols are also included. The publication is primarily aimed at food and environmental safety laboratories involved in testing veterinary drug residues, including under organized national residue monitoring programmes. It is expected to enhance laboratory capacity building and competence through the use of radiometric and complementary tools and techniques. The publication is also relevant for applied research on residues of veterinary drugs in food and environmental samples

Management of patients taking antiplatelet or anticoagulant medication requiring invasive breast procedures: United Kingdom survey of radiologists' and surgeons' current practice

International Nuclear Information System (INIS)

Pritchard, M.G.; Townend, J.N.; Lester, W.A.; England, D.W.; Kearins, O.; Bradley, S.A.

2008-01-01

Aim: To determine the current practice in the UK National Health Service Breast Screening Programme for invasive diagnostic procedures and surgery in patients taking anticoagulant and antiplatelet medication. Materials and methods: Lead radiologists and surgeons at each breast screening service were surveyed to determine current practice. One hundred and five respondents provided information regarding their services, protocols, and willingness to proceed with combinations of procedures and anti-haemostatic medications. Results: Between units there was wide variation in practice. Within 21 services providing more than one response, 10 (48%) disagreed on whether protocols existed. Decisions to perform biopsies were unrelated to professional group. The taking of a drug history was variable. Surgeons reported more adverse effects than radiologists [21 (48%) versus 12 (26%)], but no difference in self-assessment of knowledge. Conclusion: Both radiologists and surgeons have expressed uncertainty about their understanding of anticoagulant and antiplatelet treatment. This is reflected in a wide range of practice. Guidance regarding the management of these patients is suggested

Practice for use of a dichromate dosimetry system

International Nuclear Information System (INIS)

2003-01-01

This practice covers the preparation, testing, and procedure for using the acidic aqueous silver dichromate dosimetry system to measure absorbed dose in water when exposed to ionizing radiation. The system consists of a dosimeter and appropriate analytical instrumentation. For simplicity, the system will be referred to as the dichromate system. It is classified as a reference standard dosimetry system (see ISO/ASTM Guide 51261). This practice describes the spectrophotometric analysis procedures for the dichromate system. This practice applies only to γ-rays, x-rays/ bremsstrahlung, and high energy electrons. This practice applies provided the following conditions are satisfied: the absorbed dose range is from 2x10 3 to 5x10 4 Gy; the absorbed dose rate does not exceed 600 Gy/pulse (12.5 pulses per second), or does not exceed an equivalent dose rate of 7.5 kGy/s from continuous sources; for radionuclide gamma-ray sources, the initial photon energy shall be greater than 0.6 MeV. For bremsstrahlung photons, the initial energy of the electrons used to produce the bremsstrahlung photons shall be equal to or greater than 2 MeV. For electron beams, the initial electron energy shall be greater than 8 MeV; the irradiation temperature of the dosimeter shall be above 0 deg C and should be below 80 deg C

Diosgenin: Recent Highlights on Pharmacology and Analytical Methodology.

Science.gov (United States)

Jesus, Mafalda; Martins, Ana P J; Gallardo, Eugenia; Silvestre, Samuel

2016-01-01

Diosgenin, a steroidal sapogenin, occurs abundantly in plants such as Dioscorea alata , Smilax China, and Trigonella foenum graecum . This bioactive phytochemical not only is used as an important starting material for the preparation of several steroidal drugs in the pharmaceutical industry, but has revealed also high potential and interest in the treatment of various types of disorders such as cancer, hypercholesterolemia, inflammation, and several types of infections. Due to its pharmacological and industrial importance, several extraction and analytical procedures have been developed and applied over the years to isolate, detect, and quantify diosgenin, not only in its natural sources and pharmaceutical compositions, but also in animal matrices for pharmacodynamic, pharmacokinetic, and toxicological studies. Within these, HPLC technique coupled to different detectors is the most commonly analytical procedure described for this compound. However, other alternative methods were also published. Thus, the present review aims to provide collective information on the most recent pharmacological data on diosgenin and on the most relevant analytical techniques used to isolate, detect, and quantify this compound as well.

Diosgenin: Recent Highlights on Pharmacology and Analytical Methodology

Directory of Open Access Journals (Sweden)

Mafalda Jesus

2016-01-01

Full Text Available Diosgenin, a steroidal sapogenin, occurs abundantly in plants such as Dioscorea alata, Smilax China, and Trigonella foenum graecum. This bioactive phytochemical not only is used as an important starting material for the preparation of several steroidal drugs in the pharmaceutical industry, but has revealed also high potential and interest in the treatment of various types of disorders such as cancer, hypercholesterolemia, inflammation, and several types of infections. Due to its pharmacological and industrial importance, several extraction and analytical procedures have been developed and applied over the years to isolate, detect, and quantify diosgenin, not only in its natural sources and pharmaceutical compositions, but also in animal matrices for pharmacodynamic, pharmacokinetic, and toxicological studies. Within these, HPLC technique coupled to different detectors is the most commonly analytical procedure described for this compound. However, other alternative methods were also published. Thus, the present review aims to provide collective information on the most recent pharmacological data on diosgenin and on the most relevant analytical techniques used to isolate, detect, and quantify this compound as well.

Scenes for Social Information Processing in Adolescence: Item and factor analytic procedures for psychometric appraisal.

Science.gov (United States)

Vagos, Paula; Rijo, Daniel; Santos, Isabel M

2016-04-01

Relatively little is known about measures used to investigate the validity and applications of social information processing theory. The Scenes for Social Information Processing in Adolescence includes items built using a participatory approach to evaluate the attribution of intent, emotion intensity, response evaluation, and response decision steps of social information processing. We evaluated a sample of 802 Portuguese adolescents (61.5% female; mean age = 16.44 years old) using this instrument. Item analysis and exploratory and confirmatory factor analytic procedures were used for psychometric examination. Two measures for attribution of intent were produced, including hostile and neutral; along with 3 emotion measures, focused on negative emotional states; 8 response evaluation measures; and 4 response decision measures, including prosocial and impaired social behavior. All of these measures achieved good internal consistency values and fit indicators. Boys seemed to favor and choose overt and relational aggression behaviors more often; girls conveyed higher levels of neutral attribution, sadness, and assertiveness and passiveness. The Scenes for Social Information Processing in Adolescence achieved adequate psychometric results and seems a valuable alternative for evaluating social information processing, even if it is essential to continue investigation into its internal and external validity. (c) 2016 APA, all rights reserved.

Analytical standards for accountability of uranium hexafluoride - 1972

International Nuclear Information System (INIS)

Anon.

1976-01-01

An analytical standard for the accountability of uranium hexafluoride is presented that includes procedures for subsampling, determination of uranium, determination of metallic impurities and isotopic analysis by gas and thermal ionization mass spectrometry

NC CATCH: Advancing Public Health Analytics.

Science.gov (United States)

Studnicki, James; Fisher, John W; Eichelberger, Christopher; Bridger, Colleen; Angelon-Gaetz, Kim; Nelson, Debi

2010-01-01

The North Carolina Comprehensive Assessment for Tracking Community Health (NC CATCH) is a Web-based analytical system deployed to local public health units and their community partners. The system has the following characteristics: flexible, powerful online analytic processing (OLAP) interface; multiple sources of multidimensional, event-level data fully conformed to common definitions in a data warehouse structure; enabled utilization of available decision support software tools; analytic capabilities distributed and optimized locally with centralized technical infrastructure; two levels of access differentiated by the user (anonymous versus registered) and by the analytical flexibility (Community Profile versus Design Phase); and, an emphasis on user training and feedback. The ability of local public health units to engage in outcomes-based performance measurement will be influenced by continuing access to event-level data, developments in evidence-based practice for improving population health, and the application of information technology-based analytic tools and methods.

Analytical capabilities of laser-probe mass spectrometry

International Nuclear Information System (INIS)

Kovalev, I.D.; Madsimov, G.A.; Suchkov, A.I.; Larin, N.V.

1978-01-01

The physical bases and quantitative analytical procedures of laser-probe mass spectrometry are considered in this review. A comparison is made of the capabilities of static and dynamic mass spectrometers. Techniques are studied for improving the analytical characteristics of laser-probe mass spectrometers. The advantages, for quantitative analysis, of the Q-switched mode over the normal pulse mode for lasers are: (a) the possibility of analysing metals, semiconductors and insulators without the use of standards; and (b) the possibility of layer-by-layer and local analysis. (Auth.)

A New Project-Based Lab for Undergraduate Environmental and Analytical Chemistry

Science.gov (United States)

Adami, Gianpiero

2006-01-01

A new project-based lab was developed for third year undergraduate chemistry students based on real world applications. The experience suggests that the total analytical procedure (TAP) project offers a stimulating alternative for delivering science skills and developing a greater interest for analytical chemistry and environmental sciences and…

Practice for use of a ceric-cerous sulfate dosimetry system

International Nuclear Information System (INIS)

2002-01-01

This practice covers the preparation, testing, and procedure for using the ceric-cerous sulfate dosimetry system to measure absorbed dose in water when exposed to ionizing radiation. The system consists of a dosimeter and appropriate analytical instrumentation. For simplicity, the system will be referred to as the ceric-cerous system. It is classified as a reference standard dosimetry system (see ISO/ASTM Guide 51261). Ceric-cerous dosimeters are also used as transfer-standard dosimeters or routine dosimeters. This practice describes both the spectrophotometric and the potentiometric readout procedures for the ceric-cerous systems. This practice applies only to g rays, X rays, and high energy electrons. This practice applies provided the following are satisfied: The absorbed-dose range shall be between 5x10 2 and 5x10 4 Gy. The absorbed-dose rate shall be less than 10 6 Gy/s. For radionuclide gamma-ray sources, the initial photon energy shall be greater than 0.6 MeV. For bremsstrahlung photons, the initial energy of the electrons used to produce the bremsstrahlung photons shall be equal to or greater than 2 MeV. For electron beams, the initial electron energy shall be greater than 8 MeV. The irradiation temperature of the dosimeter shall be between 0 and 62 deg C

Pollution prevention in the analytical laboratory--Microscale and other techniques do add up

International Nuclear Information System (INIS)

Erickson, M.D.; Alvarado, J.S.; Lu, C.-S.; Peterson, D.P.; Silzer, J.

1996-01-01

The principles of pollution prevention in the analytical laboratory have not been addressed sufficiently. Although the amount of reagent used per sample is often only a few milliliters, the aggregate of many routine test each day in thousands of laboratories becomes significant. Current recycling practices are not practical with small streams. Therefore, we have adopted the principles of microscale chemistry, along with other modern analytical approaches, to develop routine analytical methods that significantly curtail waste but still maintain acceptable analytical figures of merit and achieve cost savings through reduced reagent consumption and reduced labor cost

Numerical and semi-analytical modelling of the process induced distortions in pultrusion

DEFF Research Database (Denmark)

Baran, Ismet; Carlone, P.; Hattel, Jesper Henri

2013-01-01

, the transient distortions are inferred adopting a semi-analytical procedure, i.e. post processing numerical results by means of analytical methods. The predictions of the process induced distortion development using the aforementioned methods are found to be qualitatively close to each other...

Analytic observables in nuclear physics

International Nuclear Information System (INIS)

Borbely, I.

1980-05-01

The analytical dependence of quantum mechanical observables on their variables is discussed by using the assumption that the corresponding probability amplitudes are analytic functions. The properties of the cross section in the energy plane for spinless particles as well as the properties of the most general polarization observables in the cosdelta plane are considered in detail. In particular, the strength of the transfer pole for polarization observables is given. The practical possibilities to extract the different orbital momentum components of nuclei by extrapolation techniques are briefly outlined. (author)

Using Procedure Based on Item Response Theory to Evaluate Classification Consistency Indices in the Practice of Large-Scale Assessment

Directory of Open Access Journals (Sweden)

Shanshan Zhang

2017-09-01

Full Text Available In spite of the growing interest in the methods of evaluating the classification consistency (CC indices, only few researches are available in the field of applying these methods in the practice of large-scale educational assessment. In addition, only few studies considered the influence of practical factors, for example, the examinee ability distribution, the cut score location and the score scale, on the performance of CC indices. Using the newly developed Lee's procedure based on the item response theory (IRT, the main purpose of this study is to investigate the performance of CC indices when practical factors are taken into consideration. A simulation study and an empirical study were conducted under comprehensive conditions. Results suggested that with negatively skewed distribution, the CC indices were larger than with other distributions. Interactions occurred among ability distribution, cut score location, and score scale. Consequently, Lee's IRT procedure is reliable to be used in the field of large-scale educational assessment, and when reporting the indices, it should be treated with caution as testing conditions may vary a lot.

Work history and radioprotection practices in relation to cancer incidence and mortality in US radiologic technologists performing nuclear medicine procedures.

Science.gov (United States)

Bernier, Marie Odile; Doody, Michele M; Van Dyke, Miriam E; Villoing, Daphné; Alexander, Bruce H; Linet, Martha S; Kitahara, Cari M

2018-05-02

Technologists working in nuclear medicine (NM) are exposed to higher radiation doses than most other occupationally exposed populations. The aim of this study was to estimate the risk of cancer in NM technologists in relation to work history, procedures performed and radioprotection practices. From the US Radiologic Technologists cohort study, 72 755 radiologic technologists who completed a 2003-2005 questionnaire were followed for cancer mortality through 31 December 2012 and for cancer incidence through completion of a questionnaire in 2012-2013. Multivariable-adjusted models were used to estimate HRs for total cancer incidence and mortality by history of ever performing NM procedures and frequency of performing specific diagnostic or therapeutic NM procedures and associated radiation protection measures by decade. During follow-up (mean=7.5 years), 960 incident cancers and 425 cancer deaths were reported among the 22 360 technologists who worked with NM procedures. We observed no increased risk of cancer incidence (HR 0.96, 95% CI 0.89 to 1.04) or death (HR 1.05, 95% CI 0.93 to 1.19) among workers who ever performed NM procedures. HRs for cancer incidence but not mortality were higher for technologists who began performing therapeutic procedures in 1960 and later compared with the 1950s. Frequency of performing diagnostic or therapeutic NM procedures and use of radioprotection measures were not consistently associated with cancer risk. No clear associations were observed for specific cancers, but results were based on small numbers. Cancer incidence and mortality were not associated with NM work history practices, including greater frequency of procedures performed. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Procedures development and methodology of control for application of good manufacture practices (GMP) on human blood irradiation

International Nuclear Information System (INIS)

Boghi, Claudio

2008-01-01

The irradiation of human blood is used to avoid the TA-GVHD (transfusion-associated graft-versus-host-disease), a rare but devastating adverse effect of leukocytes present in blood components for a immunocompetent transfusion recipients. Usually this irradiation practice is performed to a physical elimination of leukocytes. The implementation of the procedures will assure that the properly dose in a range of 25 Gy to 50 Gy will be delivered to the blood in the bag collected in a blood tissue bank. The studies of the procedures in order to establish a GMP (Good Manufacturing Practices) were developed under the guidelines of the standard ISO 11137 - Sterilization of health care products - Requirements for validation and routine control - Radiation sterilization. In this work, two dosimetric systems were used for dose mapping during the studies of irradiator qualification, loading pattern, irradiation process validation and auditing. The CaS0 4 :Dy dosimeter presented difficulties concerning to uncertainty on dose measurement, stability, traceability and calibration. The PMMA and Gafchromic dosimetric systems have shown a better performance and were adopted on studies of irradiators qualification that are necessary to implementation of GMP. The irradiation tests have been done in a Gammacell 220 irradiator. The developed procedures can be adapted for different kinds of gamma irradiators, allowing implanting a quality assurance program and a GMP for blood irradiation. (author)

Practices and rules applied for the design of large dry PWR-containments within EC countries

International Nuclear Information System (INIS)

Karwat, H.

1989-01-01

The containment system is an essential component of nuclear power plants and its behaviour plays an important role in the evaluation of accident consequences of pressurized water reactors. The present report illuminates the analytical methods for the simulation of the thermohydraulic loads and the experimental background to support these methods. The national rules and practices applied within the EC member countries to determine the local and global design loads were compared. For thermohydraulic load prediction only small differences have been found, particularly in the required safety addition factors covering the uncertainties of the predictive analytical simulation procedures. Comparison of design loads shows in general that analytical methods are comparable throughout the EC member countries and, with regard to their determination, warrant to a large extent an equal degree of conservatism

Maze Procedures for Atrial Fibrillation, From History to Practice.

Science.gov (United States)

Kik, Charles; Bogers, Ad J J C

2011-10-01

Atrial fibrillation may result in significant symptoms, (systemic) thrombo-embolism, as well as tachycardia-induced cardiomyopathy with cardiac failure, and consequently be associated with significant morbidity and mortality. Nowadays symptomatic atrial fibrillation can be treated with catheter-based ablation, surgical ablation or hybrid approaches. In this setting a fairly large number of surgical approaches and procedures are described and being practised. It should be clear that the Cox-maze procedure resulted from building up evidence and experience in different steps, while some of the present surgical approaches and techniques are being based only on technical feasibility with limited experience, rather than on a process of consequent methodology. Some of the issues still under debate are whether or not the maze procedure can be limited to the left atrium or even to isolation of the pulmonary veins or that bi-atrial procedures are indicated, whether or not cardiopulmonary bypass is to be applied and which route of exposure facilitates an optimal result. In addition, maze procedures are not procedures guide by electrophysiological mapping. At least in theory not in all patients all lesions of the maze procedures are necessary. A history and aspects of current practise in surgical treatment of atrial fibrillation is presented.

Transducer hygiene: comparison of procedures for decontamination of ultrasound transducers and their use in clinical practice.

Science.gov (United States)

Häggström, Mikael; Spira, Jack; Edelstam, Greta

2015-02-01

To determine whether current hygiene practices are appropriate during sonographic examinations. Five major hospitals in Sweden were investigated with a survey. At each hospital, the departments corresponding to the main types of sonographic examination were chosen. Personnel who were responsible for or acquainted with the local hygiene procedures completed a standardardized questionnaire. The surveys were completed by 25 departments, where the total number of sonographic examinations was approximately 20,000 per month. For transvaginal and transrectal sonographic examinations, the most common method for decontamination of the transducer was barrier protection during the procedure followed by cleansing with alcohol. Latex was the predominant cover material, but one department used polyethylene gloves, and another department used nitrile gloves. Both of these involved transvaginal ultrasonography. In transcutaneous examinations, all hospitals were using alcohol and paper or cloth for decontamination at a minimum. Transesophageal examinations were carried out without barrier protection, and decontamination was performed with an alkylating substance. The hygiene practices appear to be appropriate at most hospitals, but there is a prevalence of transducer cover materials of unacceptable permeability, as well as use of gloves on transducers despite insufficient evidence of safety. © 2015 Wiley Periodicals, Inc.

Capacity Enablers and Barriers for Learning Analytics: Implications for Policy and Practice

Science.gov (United States)

Wolf, Mary Ann; Jones, Rachel; Hall, Sara; Wise, Bob

2014-01-01

The field of learning analytics is being discussed in many circles as an emerging concept in education. In many districts and states, the core philosophy behind learning analytics is not entirely new; for more than a decade, discussions of data-driven decision making and the use of data to drive instruction have been common. Still, the U.S.…

Intercalibration of analytical methods on marine environmental samples

International Nuclear Information System (INIS)

1988-06-01

The pollution of the seas by various chemical substances constitutes nowadays one of the principal concerns of mankind. The International Atomic Energy Agency has organized in past years several intercomparison exercises in the framework of its Analytical Quality Control Service. The present intercomparison had a double aim: first, to give laboratories participating in this intercomparison an opportunity for checking their analytical performance. Secondly, to produce on the basis of the results of this intercomparison a reference material made of fish tissue which would be accurately certified with respect to many trace elements. Such a material could be used by analytical chemists to check the validity of new analytical procedures. In total, 53 laboratories from 29 countries reported results (585 laboratory means for 48 elements). 5 refs, 52 tabs

Considerable variability of procedural sedation and analgesia practices for gastrointestinal endoscopic procedures in Europe

NARCIS (Netherlands)

Vaessen, Hermanus H B; Knape, Johannes T A

2016-01-01

Background/Aims: The use of moderate to deep sedation for gastrointestinal endoscopic procedures has increased in Europe considerably. Because this level of sedation is a risky medical procedure, a number of international guidelines have been developed. This survey aims to review if, and if so

16 CFR 1.95 - Procedures upon election.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Procedures upon election. 1.95 Section 1.95 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE GENERAL... the appropriate district court of the United States for an order enforcing the assessment of the civil...

How to conduct External Quality Assessment Schemes for the pre-analytical phase?

Science.gov (United States)

Kristensen, Gunn B B; Aakre, Kristin Moberg; Kristoffersen, Ann Helen; Sandberg, Sverre

2014-01-01

In laboratory medicine, several studies have described the most frequent errors in the different phases of the total testing process, and a large proportion of these errors occur in the pre-analytical phase. Schemes for registration of errors and subsequent feedback to the participants have been conducted for decades concerning the analytical phase by External Quality Assessment (EQA) organizations operating in most countries. The aim of the paper is to present an overview of different types of EQA schemes for the pre-analytical phase, and give examples of some existing schemes. So far, very few EQA organizations have focused on the pre-analytical phase, and most EQA organizations do not offer pre-analytical EQA schemes (EQAS). It is more difficult to perform and standardize pre-analytical EQAS and also, accreditation bodies do not ask the laboratories for results from such schemes. However, some ongoing EQA programs for the pre-analytical phase do exist, and some examples are given in this paper. The methods used can be divided into three different types; collecting information about pre-analytical laboratory procedures, circulating real samples to collect information about interferences that might affect the measurement procedure, or register actual laboratory errors and relate these to quality indicators. These three types have different focus and different challenges regarding implementation, and a combination of the three is probably necessary to be able to detect and monitor the wide range of errors occurring in the pre-analytical phase.

78 FR 21517 - Practices and Procedures

Science.gov (United States)

2013-04-11

... electronic format, including word processing applications, HTML or PDF. Commenters are asked to use a text format and not an image format for attachments. The email should contain a subject line indicating that... Administrative Procedure Act (APA). However, an exemption from notice and comment rulemaking requirements exists...

Procedures in diagnostic radiology

International Nuclear Information System (INIS)

Doyle, T.; Hare, W.S.C.; Thomson, K.; Tess, B.

1989-01-01

This book outlines the various procedures necessary for the successful practice of diagnostic radiology. Topics covered are: general principles, imaging of the urinary and gastrointestinal tracts, vascular radiology, arthrography, and miscellaneous diagnostic radiologic procedures

Google Analytics – Index of Resources

Science.gov (United States)

Find how-to and best practice resources and training for accessing and understanding EPA's Google Analytics (GA) tools, including how to create reports that will help you improve and maintain the web areas you manage.

United States Nuclear Regulatory Commission Staff practice and procedure digest: Commission, Appeal Board and Licensing Board Decisions, July 1972--December 1988

International Nuclear Information System (INIS)

1989-10-01

This Revision 2 of the fifth edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period from July 1, 1972 to December 31, 1988, interpreting the NRC's Rules of Practice in 10 CFR Part 2. This Revision 2 replaces in part earlier editions and revisions and includes appropriate changes reflecting the amendments to the Rules of Practice Effective through December 31, 1988. The Practice and Procedure Digest was originally prepared by attorneys in the NRC's Office of the Executive Legal Director (now, Office of the General Counsel) as an internal research tool. Because of its proven usefulness to those attorneys, it was decided that it might also prove useful to members of the public. Accordingly, the decision was made to publish the Digest and subsequent editions thereof. This edition of the Digest was prepared by attorneys from Aspen Systems Corporation pursuant to Contract number 18-89-346

Self-perceived versus objectively measured competence in performing clinical practical procedures by final year medical students.

Science.gov (United States)

Katowa-Mukwato, Patricia; Banda, Sekelani

2016-04-30

To determine and compare the self-perceived and objectively measured competence in performing 14 core-clinical practical procedures by Final Year Medical Students of the University of Zambia. The study included 56 out of 60 graduating University of Zambia Medical Students of the 2012/2013 academic year. Self-perceived competence: students rated their competence on 14 core- clinical practical procedures using a self-administered questionnaire on a 5-point Likert scale. Objective competence: it was measured by Objective Structured Clinical Examination (OSCE) by faculty using predetermined rating scales. Rank order correlation test was performed for self-perceived and objectively measured competence. Two thirds 36 (66.7%) of the participants perceived themselves as moderately competent, 15 (27.8%) rated themselves as highly competent while 3 (5.6%) had low self-perception. With objective competence, the majority 52 (92.8%) were barely competent while 4 (7.2%) were absolutely competent. When overall self-perception was compared to objectively measured competence, there was a discordance which was demonstrated by a negative correlation (Spearman rho -.123). Significant numbers of students reported low self-competence in performing procedures such as endotracheal intubation, gastric lavage and cardiopulmonary resuscitation which most never performed during the clinical years of medical education. In addition, the negative correlation between self-perceived and objectively measured competence demonstrated the inability of students to assess and rate themselves objectively due to fear that others may know their weaknesses and realize that they are not as competent as expected at a specific level of training.

Proposal of a new analytical procedure for the measurement of water absorption by stone. Preliminary study for an alternative to the Italian technical normative NORMAL 07-81

Directory of Open Access Journals (Sweden)

Plattner Susanne

2012-06-01

Full Text Available Abstract Background Italian technical normative in the field of cultural heritage is often considered insufficient or not suitable in practise, therefore efforts are necessary to design new and/or improve already existing ones. Results In this paper an alternative analytical procedure for the determination of water absorption (by full immersion by stone material, described in the NORMAL 07-81 document, is proposed. Improvements concern methods accuracy and reduction of sample size; further also density data is obtained. Conclusions The new procedure was applied on three different marble samples and outcomes are encouraging, but further testing is running to better understand to what extent sample size can be reduced without worsening accuracy of results, taking into account that stone is a very heterogeneous material.

Using Analytic Hierarchy Process in Textbook Evaluation

Science.gov (United States)

Kato, Shigeo

2014-01-01

This study demonstrates the application of the analytic hierarchy process (AHP) in English language teaching materials evaluation, focusing in particular on its potential for systematically integrating different components of evaluation criteria in a variety of teaching contexts. AHP is a measurement procedure wherein pairwise comparisons are made…

United States Nuclear Regulatory Commission Staff Practice and Procedure Digest: Commission, Appeal Board and Licensing Board decisions, July 1972--March 1992

International Nuclear Information System (INIS)

1993-02-01

This 5th revision of the sixth edition of the NRC Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period of July 1, 1972 to March 31, 1992, interpreting the NRC's Rules of Practice in 10 CFR Part 2

United States Nuclear Regulatory Commission staff practice and procedure digest: Commission, Appeal Board and Licensing Board decisions, July 1972--December 1991

International Nuclear Information System (INIS)

1992-11-01

This 4th revision of the sixth edition of the NRC Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period of July 1, 1972 to December 31, 1991, interpreting the NRC's Rules of Practice in 10 CFR Part 2

Recent developments in computer vision-based analytical chemistry: A tutorial review.

Science.gov (United States)

Capitán-Vallvey, Luis Fermín; López-Ruiz, Nuria; Martínez-Olmos, Antonio; Erenas, Miguel M; Palma, Alberto J

2015-10-29

Chemical analysis based on colour changes recorded with imaging devices is gaining increasing interest. This is due to its several significant advantages, such as simplicity of use, and the fact that it is easily combinable with portable and widely distributed imaging devices, resulting in friendly analytical procedures in many areas that demand out-of-lab applications for in situ and real-time monitoring. This tutorial review covers computer vision-based analytical (CVAC) procedures and systems from 2005 to 2015, a period of time when 87.5% of the papers on this topic were published. The background regarding colour spaces and recent analytical system architectures of interest in analytical chemistry is presented in the form of a tutorial. Moreover, issues regarding images, such as the influence of illuminants, and the most relevant techniques for processing and analysing digital images are addressed. Some of the most relevant applications are then detailed, highlighting their main characteristics. Finally, our opinion about future perspectives is discussed. Copyright © 2015 Elsevier B.V. All rights reserved.

Microbial ecology laboratory procedures manual NASA/MSFC

Science.gov (United States)

Huff, Timothy L.

1990-01-01

An essential part of the efficient operation of any microbiology laboratory involved in sample analysis is a standard procedures manual. The purpose of this manual is to provide concise and well defined instructions on routine technical procedures involving sample analysis and methods for monitoring and maintaining quality control within the laboratory. Of equal importance is the safe operation of the laboratory. This manual outlines detailed procedures to be followed in the microbial ecology laboratory to assure safety, analytical control, and validity of results.

Risk analysis of analytical validations by probabilistic modification of FMEA.

Science.gov (United States)

Barends, D M; Oldenhof, M T; Vredenbregt, M J; Nauta, M J

2012-05-01

Risk analysis is a valuable addition to validation of an analytical chemistry process, enabling not only detecting technical risks, but also risks related to human failures. Failure Mode and Effect Analysis (FMEA) can be applied, using a categorical risk scoring of the occurrence, detection and severity of failure modes, and calculating the Risk Priority Number (RPN) to select failure modes for correction. We propose a probabilistic modification of FMEA, replacing the categorical scoring of occurrence and detection by their estimated relative frequency and maintaining the categorical scoring of severity. In an example, the results of traditional FMEA of a Near Infrared (NIR) analytical procedure used for the screening of suspected counterfeited tablets are re-interpretated by this probabilistic modification of FMEA. Using this probabilistic modification of FMEA, the frequency of occurrence of undetected failure mode(s) can be estimated quantitatively, for each individual failure mode, for a set of failure modes, and the full analytical procedure. Copyright © 2012 Elsevier B.V. All rights reserved.

Calculation of uncertainties associated to environmental radioactivity measurements and their functions. Practical Procedure

International Nuclear Information System (INIS)

Gasco Leonarte, C.; Anton Mateos, M.P.

1995-12-01

This report summarizes the procedure used to calculate the uncertainties associated to environmental radioactivity measurements. focusing on those obtained by radiochemical separation in which tracers have been added. Uncertainties linked to activity concentration calculations, isotopic ratio, inventories, sequential leaching data, chronology dating by using C.R.S model and duplicate analysis are described in detail. The objective of this article is to serve as a guide to people not familiarized with this kind of calculations, showing clear practical examples. The input of the formulas and all the data needed to achieve these calculations into the Lotus 1,2,3, WIN is outlined as well. (Author)

Calculation of uncertainties associated to environmental radioactivity measurements and their functions. Practical Procedure

International Nuclear Information System (INIS)

Gasco Leonarte, C; Anton Mateos, M. P.

1995-01-01

This report summarizes the procedure used to calculate the uncertainties associated to environmental radioactivity measurements, focusing on those obtained by radiochemical separation in which tracers have been added. Uncertainties linked to activity concentration calculations, isotopic rat iso, inventories, sequential leaching data, chronology dating by using C.R.S. model and duplicate analysis are described in detail. The objective of this article is to serve as a guide to people not familiarized with this kind of calculations, showing clear practical examples. The input of the formulas and all the data needed to achieve these calculations into the Lotus 1, 2, 3 WTN is outlined as well. (Author) 13 refs

The regulatory practice of the French financial regulator, 2006-2011. From substantive to procedural financial regulation?

Directory of Open Access Journals (Sweden)

Thierry Kirat

2015-11-01

Full Text Available Fraud and misconduct in financial markets have recently become a key regulatory issue against the backdrop of the financial crisis. This paper investigates the sanctions policy and practices of the French financial regulator, Autorité des Marchés Financiers (AMF. It argues that, over time, the AMF has shifted from substantive to procedural regulation of finance. This shift consists in departing from sanctions based on observed outcomes in the market and, instead, assessing how the internal organizational schemes of financial firms actually perform. The AMF’s new policy and practice involves a process of legalization of organizations; it also evidences a tendency to delegate regulation to financial firms themselves

User-Centered Evaluation of Visual Analytics

Energy Technology Data Exchange (ETDEWEB)

Scholtz, Jean C.

2017-10-01

Visual analytics systems are becoming very popular. More domains now use interactive visualizations to analyze the ever-increasing amount and heterogeneity of data. More novel visualizations are being developed for more tasks and users. We need to ensure that these systems can be evaluated to determine that they are both useful and usable. A user-centered evaluation for visual analytics needs to be developed for these systems. While many of the typical human-computer interaction (HCI) evaluation methodologies can be applied as is, others will need modification. Additionally, new functionality in visual analytics systems needs new evaluation methodologies. There is a difference between usability evaluations and user-centered evaluations. Usability looks at the efficiency, effectiveness, and user satisfaction of users carrying out tasks with software applications. User-centered evaluation looks more specifically at the utility provided to the users by the software. This is reflected in the evaluations done and in the metrics used. In the visual analytics domain this is very challenging as users are most likely experts in a particular domain, the tasks they do are often not well defined, the software they use needs to support large amounts of different kinds of data, and often the tasks last for months. These difficulties are discussed more in the section on User-centered Evaluation. Our goal is to provide a discussion of user-centered evaluation practices for visual analytics, including existing practices that can be carried out and new methodologies and metrics that need to be developed and agreed upon by the visual analytics community. The material provided here should be of use for both researchers and practitioners in the field of visual analytics. Researchers and practitioners in HCI and interested in visual analytics will find this information useful as well as a discussion on changes that need to be made to current HCI practices to make them more suitable to

Quantification procedures in micro X-ray fluorescence analysis

International Nuclear Information System (INIS)

Kanngiesser, Birgit

2003-01-01

For the quantification in micro X-ray fluorescence analysis standardfree quantification procedures have become especially important. An introduction to the basic concepts of these quantification procedures is given, followed by a short survey of the procedures which are available now and what kind of experimental situations and analytical problems are addressed. The last point is extended by the description of an own development for the fundamental parameter method, which renders the inclusion of nonparallel beam geometries possible. Finally, open problems for the quantification procedures are discussed

Automation of analytical processes. A tool for higher efficiency and safety

International Nuclear Information System (INIS)

Groll, P.

1976-01-01

The analytical laboratory of a radiochemical facility is usually faced with the fact that numerous analyses of a similar type must be routinely carried out. Automation of such routine analytical procedures helps in increasing the efficiency and safety of the work. A review of the requirements for automation and its advantages is given and demonstrated on three examples. (author)

40Ar/39Ar geochronology at the Instituto de Geociências, USP: instrumentation, analytical procedures, and calibration

Directory of Open Access Journals (Sweden)

PAULO M. VASCONCELOS

2002-06-01

Full Text Available Laser heating 40Ar/39Ar geochronology provides high analytical precision and accuracy, mum-scale spatial resolution, and statistically significant data sets for the study of geological and planetary processes. A newly commissioned 40Ar/39Ar laboratory at CPGeo/USP, São Paulo, Brazil, equips the Brazilian scientific community with a new powerful tool applicable to the study of geological and cosmochemical processes. Detailed information about laboratory layout, environmental conditions, and instrumentation provides the necessary parameters for the evaluation of the CPGeo/USP 40Ar/39Ar suitability to a diverse range of applications. Details about analytical procedures, including mineral separation, irradiation at the IPEN/CNEN reactor at USP, and mass spectrometric analysis enable potential researchers to design the necessary sampling and sample preparation program suitable to the objectives of their study. Finally, the results of calibration tests using Ca and K salts and glasses, international mineral standards, and in-house mineral standards show that the accuracy and precision obtained at the 40Ar/39Ar laboratory at CPGeo/USP are comparable to results obtained in the most respected laboratories internationally. The extensive calibration and standardization procedures undertaken ensure that the results of analytical studies carried out in our laboratories will gain immediate international credibility, enabling Brazilian students and scientists to conduct forefront research in earth and planetary sciences.A geocronologia de 40Ar/39Ar por aquecimento a laser permite alta precisão e acurácia analítica, tem resolução espacial em escala micrométrica, e fornece um número de dados estatisticamente significantes para o estudo de processos geológicos e planetários. Um recém construído laboratório de 40Ar/39Ar no CPGeo/USP, São Paulo, Brazil, mune a sociedade científica brasileira com uma técnica eficaz aplicável aos estudos geol

Appendix 1: Analytical Techniques (Online supplementary material ...

Indian Academy of Sciences (India)

HP

Further details of analytical techniques are given in http://www.actlabs.com. Zircon U–Pb dating and trace element analysis. The zircons were separated using standard procedures including crushing (in iron mortar and pestle), sieving (375 to 75 micron), tabling, heavy liquid separation (bromoform and methylene iodide) ...

75 FR 29996 - Review of MMS NEPA Policies, Practices, and Procedures for OCS Oil and Gas Exploration and...

Science.gov (United States)

2010-05-28

... Environmental Policy Act (NEPA) policies, practices, and procedures for the Minerals Management Service (MMS... applies NEPA in its management of Outer Continental Shelf oil and gas exploration and development and make recommendations for revisions. The scope of the review is intended to be holistic, i.e. from leasing decisions to...

United State Nuclear Regulatory Commission staff practice and procedure digest: Commission, Appeal Board, and Licensing Board decisions, July 1972--June 1988

International Nuclear Information System (INIS)

1989-04-01

This fifth edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period from July 1, 1972 to June 30, 1988 interpreting the NRC's Rules of Practice in 10 CFR Part 2. This edition replaces in their entirety earlier editions and supplements and includes appropriate changes reflecting the amendments to the Rules of Practice effective through June 30, 1988

Applied predictive analytics principles and techniques for the professional data analyst

CERN Document Server

Abbott, Dean

2014-01-01

Learn the art and science of predictive analytics - techniques that get results Predictive analytics is what translates big data into meaningful, usable business information. Written by a leading expert in the field, this guide examines the science of the underlying algorithms as well as the principles and best practices that govern the art of predictive analytics. It clearly explains the theory behind predictive analytics, teaches the methods, principles, and techniques for conducting predictive analytics projects, and offers tips and tricks that are essential for successful predictive mode

Learning Analytics and the Academic Library: Professional Ethics Commitments at a Crossroads

Science.gov (United States)

Jones, Kyle M. L.; Salo, Dorothea

2018-01-01

In this paper, the authors address learning analytics and the ways academic libraries are beginning to participate in wider institutional learning analytics initiatives. Since there are moral issues associated with learning analytics, the authors consider how data mining practices run counter to ethical principles in the American Library…

Sampling practices and analytical techniques used in the monitoring of steam and water in CEGB nuclear boilers

International Nuclear Information System (INIS)

Goodfellow, G.I.

1978-01-01

The steam and water in CEGB Magnox and AGR nuclear boilers are continuously monitored, using both laboratory techniques and on-line instrumentation, in order to maintain the chemical quality within pre-determined limits. The sampling systems in use and some of the difficulties associated with sampling requirements are discussed. The relative merits of chemical instruments installed either locally in various parts of the plant or in centralized instrument rooms are reviewed. The quality of water in nuclear boilers, as with all high-pressure steam-raising plant, is extremely high; consequently very sensitive analytical procedures are required, particularly for monitoring the feed-water of 'once-through boiler' systems. Considerable progress has been made in this field and examples are given of some of the techniques developed for analyses at the 'μ/kg' level together with some of the current problems.(author)

Learning analytics as a "middle space"

NARCIS (Netherlands)

Suthers, D.D.; Verbert, K.; Suthers, D.; Verbert, K.; Duval, E.; Ochoa, X.

2013-01-01

Learning Analytics, an emerging field concerned with analyzing the vast data "given off" by learners in technology supported settings to inform educational theory and practice, has from its inception taken a multidisciplinary approach that integrates studies of learning with technological

Manual of Standard Operating Procedures for Veterinary Drug Residue Analysis (Spanish Edition)

International Nuclear Information System (INIS)

2017-01-01

Laboratories are crucial to national veterinary drug residue monitoring programmes. However, one of the main challenges laboratories encounter is obtaining access to relevant methods of analysis. Thus, in addition to training, providing technical advice and transferring technology, the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture has resolved to develop clear and practical manuals to support Member State laboratories. The Coordinated Research Project (CRP) on Development of Radiometric and Allied Analytical Methods to Strengthen Residue Control Programs for Antibiotic and Anthelmintic Veterinary Drug Residues has developed a number of analytical methods as standard operating procedures (SOPs), which are now compiled here. This publication contains SOPs on chromatographic and spectrometric techniques, as well as radioimmunoassay and associated screening techniques, for various anthelmintic and antimicrobial veterinary drug residue analysis. Some analytical method validation protocols are also included. The publication is primarily aimed at food and environmental safety laboratories involved in testing veterinary drug residues, including under organized national residue monitoring programmes. It is expected to enhance laboratory capacity building and competence through the use of radiometric and complementary tools and techniques. The publication is also relevant for applied research on residues of veterinary drugs in food and environmental samples

Manual of Standard Operating Procedures for Veterinary Drug Residue Analysis (French Edition)

International Nuclear Information System (INIS)

2017-01-01

Laboratories are crucial to national veterinary drug residue monitoring programmes. However, one of the main challenges laboratories encounter is obtaining access to relevant methods of analysis. Thus, in addition to training, providing technical advice and transferring technology, the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture has resolved to develop clear and practical manuals to support Member State laboratories. The Coordinated Research Project (CRP) on Development of Radiometric and Allied Analytical Methods to Strengthen Residue Control Programs for Antibiotic and Anthelmintic Veterinary Drug Residues has developed a number of analytical methods as standard operating procedures (SOPs), which are now compiled here. This publication contains SOPs on chromatographic and spectrometric techniques, as well as radioimmunoassay and associated screening techniques, for various anthelmintic and antimicrobial veterinary drug residue analysis. Some analytical method validation protocols are also included. The publication is primarily aimed at food and environmental safety laboratories involved in testing veterinary drug residues, including under organized national residue monitoring programmes. It is expected to enhance laboratory capacity building and competence through the use of radiometric and complementary tools and techniques. The publication is also relevant for applied research on residues of veterinary drugs in food and environmental samples

ANALYTICAL APPROACHES TO THE STUDY OF EXPORT TRANSACTIONS

Directory of Open Access Journals (Sweden)

Ekaterina Viktorovna Medvedeva

2015-12-01

Full Text Available Analytical approaches to research of export operations depend on the conditions containing in separate external economic contracts with foreign buyers and also on a form of an exit of the Russian supplier of export goods to a foreign market. By means of analytical procedures it is possible to foresee and predict admissible situations which can have an adverse effect on a financial position of the economic subject. The economic entity, the engaged foreign economic activity, has to carry out surely not only the analysis of the current activity, but also the analysis of export operations. In article analytical approaches of carrying out the analysis of export operations are considered, on an example the analysis of export operations in dynamics is submitted, it is recommended to use the formulas allowing to estimate export in dynamics. For the comparative analysis export volume in the comparable prices is estimated. On the commodity groups including and quantitatively and qualitatively commensurable goods, the index of quantitative structure is calculated, the coefficient of delay of delivery of goods in comparison with other periods pays off. Carrying out the analysis allows to determine a tendency of change of export deliveries by export operations for the analyzed period for adoption of administrative decisions.Purpose Definition of the ways and receptions of the analysis applying when carrying out the analysis of export operations.Methodology in article economic-mathematical methods, and also statistical methods of the analysis were used.Results: the most informative parameters showing some aspects of carrying out the analysis of export operations are received.Practical implications it is expedient to apply the received results the economic subjects which are carrying out foreign economic activity, one of which elements are export operations.

Predictive analytics and child protection: constraints and opportunities.

Science.gov (United States)

Russell, Jesse

2015-08-01

This paper considers how predictive analytics might inform, assist, and improve decision making in child protection. Predictive analytics represents recent increases in data quantity and data diversity, along with advances in computing technology. While the use of data and statistical modeling is not new to child protection decision making, its use in child protection is experiencing growth, and efforts to leverage predictive analytics for better decision-making in child protection are increasing. Past experiences, constraints and opportunities are reviewed. For predictive analytics to make the most impact on child protection practice and outcomes, it must embrace established criteria of validity, equity, reliability, and usefulness. Copyright © 2015 Elsevier Ltd. All rights reserved.

Southeast Asian Adolescents’ Perceptions of Immigrant Parenting Practices

Directory of Open Access Journals (Sweden)

Zha Blong Xiong

2005-01-01

Full Text Available In their countries of origin, immigrant youth are unlikely to question the age-old child-rearing practices of their elders; however, the parenting of adolescents in an adopted country can become a major source of family conflict. The purpose of this study is to investigate how Southeast Asian adolescents growing up in the United States perceive their parents’ practices in six areas of parenting responsibility identified by the National Extension Parent Education Model: caring for self, understanding, guiding, nurturing, motivating, and advocating. Four focus groups were conducted with 37 Southeast Asian (Cambodian, Hmong, Lao, and Vietnamese adolescent boys and girls between the ages of 14 to 19 years to ascertain how they perceived parenting behaviors. An analytic induction procedure was used to analyze transcripts from in-depth focus group discussions. Results indicate wide divergence between the idealized practices of the model, the parents’ actual practices, and adolescents’ perceptions of parenting practices. The study has important implications for the growing number of immigrant families from diverse cultures who are parenting adolescents in unfamiliar cultural contexts and for the educators, human service providers, and others who work with them.

Faculty Workload: An Analytical Approach

Science.gov (United States)

Dennison, George M.

2012-01-01

Recent discussions of practices in higher education have tended toward muck-raking and self-styled exposure of cynical self-indulgence by faculty and administrators at the expense of students and their families, as usually occurs during periods of economic duress, rather than toward analytical studies designed to foster understanding This article…

Transfer of analytical procedures: a panel of strategies selected for risk management, with emphasis on an integrated equivalence-based comparative testing approach.

Science.gov (United States)

Agut, C; Caron, A; Giordano, C; Hoffman, D; Ségalini, A

2011-09-10

In 2001, a multidisciplinary team made of analytical scientists and statisticians at Sanofi-aventis has published a methodology which has governed, from that time, the transfers from R&D sites to Manufacturing sites of the release monographs. This article provides an overview of the recent adaptations brought to this original methodology taking advantage of our experience and the new regulatory framework, and, in particular, the risk management perspective introduced by ICH Q9. Although some alternate strategies have been introduced in our practices, the comparative testing one, based equivalence testing as statistical approach, remains the standard for assays lying on very critical quality attributes. This is conducted with the concern to control the most important consumer's risk involved at two levels in analytical decisions in the frame of transfer studies: risk, for the receiving laboratory, to take poor release decisions with the analytical method and risk, for the sending laboratory, to accredit such a receiving laboratory on account of its insufficient performances with the method. Among the enhancements to the comparative studies, the manuscript presents the process settled within our company for a better integration of the transfer study into the method life-cycle, just as proposals of generic acceptance criteria and designs for assay and related substances methods. While maintaining rigor and selectivity of the original approach, these improvements tend towards an increased efficiency in the transfer operations. Copyright © 2011 Elsevier B.V. All rights reserved.

Human factors evaluation of remote afterloading brachytherapy. Supporting analyses of human-system interfaces, procedures and practices, training and organizational practices and policies. Volume 3

International Nuclear Information System (INIS)

Callan, J.R.; Kelly, R.T.; Quinn, M.L.

1995-07-01

A human factors project on the use of nuclear by-product material to treat cancer using remotely operated afterloaders was undertaken by the Nuclear Regulatory Commission. The purpose of the project was to identify factors that contribute to human error in the system for remote afterloading brachytherapy (RAB). This report documents the findings from the second, third, fourth, and fifth phases of the project, which involved detailed analyses of four major aspects of the RAB system linked to human error: human-system interfaces; procedures and practices; training practices and policies; and organizational practices and policies, respectively. Findings based on these analyses provided factual and conceptual support for the final phase of this project, which identified factors leading to human error in RAB. The impact of those factors on RAB performance was then evaluated and prioritized in terms of safety significance, and alternative approaches for resolving safety significant problems were identified and evaluated

Human factors evaluation of remote afterloading brachytherapy. Supporting analyses of human-system interfaces, procedures and practices, training and organizational practices and policies. Volume 3

Energy Technology Data Exchange (ETDEWEB)

Callan, J.R.; Kelly, R.T.; Quinn, M.L. [Pacific Science & Engineering Group, San Diego, CA (United States)] [and others

1995-07-01

A human factors project on the use of nuclear by-product material to treat cancer using remotely operated afterloaders was undertaken by the Nuclear Regulatory Commission. The purpose of the project was to identify factors that contribute to human error in the system for remote afterloading brachytherapy (RAB). This report documents the findings from the second, third, fourth, and fifth phases of the project, which involved detailed analyses of four major aspects of the RAB system linked to human error: human-system interfaces; procedures and practices; training practices and policies; and organizational practices and policies, respectively. Findings based on these analyses provided factual and conceptual support for the final phase of this project, which identified factors leading to human error in RAB. The impact of those factors on RAB performance was then evaluated and prioritized in terms of safety significance, and alternative approaches for resolving safety significant problems were identified and evaluated.

Optimization of wet digestion procedure of blood and tissue for selenium determination by means of 75Se tracer

International Nuclear Information System (INIS)

Holynska, B.; Lipinska, K.

1977-01-01

Selenium-75 tracer has been used for optimization of analytical procedure of selenium determination in blood and tissue. Wet digestion procedure and reduction of selenium to its elemental form with tellurium as coprecipitant have been tested. Recovery of selenium obtained with the use of optimized analytical procedure amounts up 95% and precision is equal to 4.2%. (author)

From basic survival analytic theory to a non-standard application

CERN Document Server

Zimmermann, Georg

2017-01-01

Georg Zimmermann provides a mathematically rigorous treatment of basic survival analytic methods. His emphasis is also placed on various questions and problems, especially with regard to life expectancy calculations arising from a particular real-life dataset on patients with epilepsy. The author shows both the step-by-step analyses of that dataset and the theory the analyses are based on. He demonstrates that one may face serious and sometimes unexpected problems, even when conducting very basic analyses. Moreover, the reader learns that a practically relevant research question may look rather simple at first sight. Nevertheless, compared to standard textbooks, a more detailed account of the theory underlying life expectancy calculations is needed in order to provide a mathematically rigorous framework. Contents Regression Models for Survival Data Model Checking Procedures Life Expectancy Target Groups Researchers, lecturers, and students in the fields of mathematics and statistics Academics and experts work...

The impact of a medical procedure service on patient safety, procedure quality and resident training opportunities.

Science.gov (United States)

Tukey, Melissa H; Wiener, Renda Soylemez

2014-03-01

At some academic hospitals, medical procedure services are being developed to provide supervision for residents performing bedside procedures in hopes of improving patient safety and resident education. There is limited knowledge of the impact of such services on procedural complication rates and resident procedural training opportunities. To determine the impact of a medical procedure service (MPS) on patient safety and resident procedural training opportunities. Retrospective cohort analysis comparing characteristics and outcomes of procedures performed by the MPS versus the primary medical service. Consecutive adults admitted to internal medicine services at a large academic hospital who underwent a bedside medical procedure (central venous catheterization, thoracentesis, paracentesis, lumbar puncture) between 1 July 2010 and 31 December 2011. The primary outcome was a composite rate of major complications. Secondary outcomes included resident participation in bedside procedures and use of "best practice" safety process measures. We evaluated 1,707 bedside procedures (548 by the MPS, 1,159 by the primary services). There were no differences in the composite rate of major complications (1.6 % vs. 1.9 %, p = 0.71) or resident participation in bedside procedures (57.0 % vs. 54.3 %, p = 0.31) between the MPS and the primary services. Procedures performed by the MPS were more likely to be successfully completed (95.8 % vs. 92.8 %, p = 0.02) and to use best practice safety process measures, including use of ultrasound guidance when appropriate (96.8 % vs. 90.0 %, p = 0.0004), avoidance of femoral venous catheterization (89.5 vs. 82.7 %, p = 0.02) and involvement of attending physicians (99.3 % vs. 57.0 %, p < 0.0001). Although use of a MPS did not significantly affect the rate of major complications or resident opportunities for training in bedside procedures, it was associated with increased use of best practice safety process measures.

United States Nuclear Regulatory Commission Staff Practice and Procedure Digest: Commission, Appeal Board and Licensing Board decisions, July 1972-December 1986

International Nuclear Information System (INIS)

1987-11-01

This Revision 6 of the fourth edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period from July 1, 1972 to December 31, 1986, interpreting the NRC's Rules of Practice in 10 CFR Part 2. This Revision 6 replaces in part earlier editions and supplements and includes appropriate changes reflecting the amendments to the Rules of Practice effective through December 31, 1986

United States Nuclear Regulatory Commission staff practice and procedure digest: Commission, Appeal Board and Licensing Board decisions, July 1972--December 1989

International Nuclear Information System (INIS)

1990-06-01

This Revision 6 of the fifth edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period from July 1, 1972 to December 31, 1989 interpreting the NRC's Rules of Practice in 10 CFR Part 2. This Revision 6 replaces in part earlier editions and revisions and includes appropriate changes reflecting the amendments to the Rules of Practice effective through December 31, 1989

United States Nuclear Regulatory Commission Staff practice and procedure digest: Commission, Appeal Board and Licensing Board Decisions, July 1972-March 1987

International Nuclear Information System (INIS)

1987-12-01

This Revision 7 of the fourth edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period from July 1, 1972 to March 31, 1987 interpreting the NRC's Rules of Practice in 10 CFR Part 2. This Revision 7 replaces in part earlier editions and supplements and includes appropriate changes reflecting the amendments to the Rules of Practice effective through March 31, 1987

United States Nuclear Regulatory Commission staff practice and procedure digest: Commission, Appeal Board and Licensing Board decisions, July 1972--September 1988

International Nuclear Information System (INIS)

1989-04-01

This Revision 1 of the fifth edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period from July 1, 1972 to September 30, 1988 interpreting the NRC's Rules of Practice in 10 CFR Part 2. This Revision 1 replaces in part earlier editions and supplements and includes appropriate changes reflecting the amendments to the Rules of Practice effective through September 30, 1988

Ophthalmic practice

Directory of Open Access Journals (Sweden)

Sue Stevens

2005-03-01

Full Text Available Eye health workers carry out many basic routine procedures. Sometimes bad practice develops and this, in turn, may lead to new members of staff learning unsafe methods. Community Eye Health Journal plans to run a series on practical procedures, when applicable, relating to the theme.

Median of patient results as a tool for assessment of analytical stability

DEFF Research Database (Denmark)

Jørgensen, Lars Mønster; Hansen, Steen Ingemann; Petersen, Per Hyltoft

2015-01-01

BACKGROUND: In spite of the well-established external quality assessment and proficiency testing surveys of analytical quality performance in laboratory medicine, a simple tool to monitor the long-term analytical stability as a supplement to the internal control procedures is often needed. METHOD......: Patient data from daily internal control schemes was used for monthly appraisal of the analytical stability. This was accomplished by using the monthly medians of patient results to disclose deviations from analytical stability, and by comparing divergences with the quality specifications for allowable...... analytical bias based on biological variation. RESULTS: Seventy five percent of the twenty analytes achieved on two COBASs INTEGRA 800 instruments performed in accordance with the optimum and with the desirable specifications for bias. DISCUSSION: Patient results applied in analytical quality performance...

A practical optimization procedure for radial BWR fuel lattice design using tabu search with a multiobjective function

International Nuclear Information System (INIS)

Francois, J.L.; Martin-del-Campo, C.; Francois, R.; Morales, L.B.

2003-01-01

An optimization procedure based on the tabu search (TS) method was developed for the design of radial enrichment and gadolinia distributions for boiling water reactor (BWR) fuel lattices. The procedure was coded in a computing system in which the optimization code uses the tabu search method to select potential solutions and the HELIOS code to evaluate them. The goal of the procedure is to search for an optimal fuel utilization, looking for a lattice with minimum average enrichment, with minimum deviation of reactivity targets and with a local power peaking factor (PPF) lower than a limit value. Time-dependent-depletion (TDD) effects were considered in the optimization process. The additive utility function method was used to convert the multiobjective optimization problem into a single objective problem. A strategy to reduce the computing time employed by the optimization was developed and is explained in this paper. An example is presented for a 10x10 fuel lattice with 10 different fuel compositions. The main contribution of this study is the development of a practical TDD optimization procedure for BWR fuel lattice design, using TS with a multiobjective function, and a strategy to economize computing time

[Quality evaluation of the orthodontic practice for certification by ISO 9001. A procedure beneficial for medical, medico-dental or hospital service].

Science.gov (United States)

Becker, G

2001-01-01

The accreditation of the ISO 9001 certification (ISO = International Standard Organization) is an external evaluation procedure carried out by independent experts, whose object is the analysis of the operational methods and practices of a medical care facility (e.g. hospital, private clinic, general practitioner's or dentist's practice) which decided to assume the concept, implementation and control of its own quality policy. The whole accreditation procedure represents the basic structure of a continuous dynamic progressiveness within a cabinet eager to offer outstanding quality. Moreover, it guarantees active and voluntary participation of every single member of the medical administration or technical team involved in the realization of this primary objective. In other words, we are talking about a very strong dynamic innovation leading to a change of views and the improvement of communication means, while simultaneously enhancing the security and quality aspects of medical care. The continuous guarantee of high quality medical care calls for precise planning and systematization of actions. First of all, these actions are defined, analyzed and listed in precise work procedures. As they are defined with the agreement of the whole team, they implicate respect and self control. This requires of course transparency of the treatment methods, whose different steps and procedures are described in detail in a logogramm set up in common.

The practice portrait

DEFF Research Database (Denmark)

Thomsen, Rie

2016-01-01

The ability of the individual practitioner to grasp how her own practice is interwoven with different societal structures and interests can be seen as the first step on the way to social justice. This article investigates how the practice portrait can be used as an analytical and practical method...

Pre-analytical and analytical aspects affecting clinical reliability of plasma glucose results.

Science.gov (United States)

Pasqualetti, Sara; Braga, Federica; Panteghini, Mauro

2017-07-01

The measurement of plasma glucose (PG) plays a central role in recognizing disturbances in carbohydrate metabolism, with established decision limits that are globally accepted. This requires that PG results are reliable and unequivocally valid no matter where they are obtained. To control the pre-analytical variability of PG and prevent in vitro glycolysis, the use of citrate as rapidly effective glycolysis inhibitor has been proposed. However, the commercial availability of several tubes with studies showing different performance has created confusion among users. Moreover, and more importantly, studies have shown that tubes promptly inhibiting glycolysis give PG results that are significantly higher than tubes containing sodium fluoride only, used in the majority of studies generating the current PG cut-points, with a different clinical classification of subjects. From the analytical point of view, to be equivalent among different measuring systems, PG results should be traceable to a recognized higher-order reference via the implementation of an unbroken metrological hierarchy. In doing this, it is important that manufacturers of measuring systems consider the uncertainty accumulated through the different steps of the selected traceability chain. In particular, PG results should fulfil analytical performance specifications defined to fit the intended clinical application. Since PG has tight homeostatic control, its biological variability may be used to define these limits. Alternatively, given the central diagnostic role of the analyte, an outcome model showing the impact of analytical performance of test on clinical classifications of subjects can be used. Using these specifications, performance assessment studies employing commutable control materials with values assigned by reference procedure have shown that the quality of PG measurements is often far from desirable and that problems are exacerbated using point-of-care devices. Copyright © 2017 The Canadian

Quality system implementation for nuclear analytical techniques

International Nuclear Information System (INIS)

2004-01-01

The international effort (UNIDO, ILAC, BIPM, etc.) to establish a functional infrastructure for metrology and accreditation in many developing countries needs to be complemented by assistance to implement high quality practices and high quality output by service providers and producers in the respective countries. Knowledge of how to approach QA systems that justify a formal accreditation is available in only a few countries and the dissemination of know how and development of skills is needed bottom up from the working level of laboratories and institutes. Awareness building, convincing of management, introduction of good management practices, technical expertise and good documentation will lead to the creation of a quality culture that assures a sustainability and inherent development of quality practices as a prerequisite of economic success. Quality assurance and quality control can be used as a valuable management tool and is a prerequisite for international trade and information exchange. This publication tries to assist quality managers, Laboratory Managers and staff involved in setting up a QA/QC system in a nuclear analytical laboratory to take appropriate action to start and complete the necessary steps for a successful quality system for ultimate national accreditation. This guidebook contributes to a better understanding of the basic ideas behind ISO/IEC 17025, the international standard for 'General requirements for the competence of testing and calibration laboratories'. It provides basic information and detailed explanation about the establishment of the QC system in analytical and nuclear analytical laboratories. It is a proper training material for training of trainers and makes managers with QC management and implementation familiar. This training material aims to facilitate the implementation of internationally accepted quality principles and to promote attempts by Member States' laboratories to obtain accreditation for nuclear analytical

Decisions through data: analytics in healthcare.

Science.gov (United States)

Wills, Mary J

2014-01-01

The amount of data in healthcare is increasing at an astonishing rate. However, in general, the industry has not deployed the level of data management and analysis necessary to make use of those data. As a result, healthcare executives face the risk of being overwhelmed by a flood of unusable data. In this essay I argue that, in order to extract actionable information, leaders must take advantage of the promise of data analytics. Small data, predictive modeling expansion, and real-time analytics are three forms of data analytics. On the basis of my analysis for this study, I recommend all three for adoption. Recognizing the uniqueness of each organization's situation, I also suggest that practices, hospitals, and healthcare systems examine small data and conduct real-time analytics and that large-scale organizations managing populations of patients adopt predictive modeling. I found that all three solutions assist in the collection, management, and analysis of raw data to improve the quality of care and decrease costs.

Orders- Versus Encounters-Based Image Capture: Implications Pre- and Post-Procedure Workflow, Technical and Build Capabilities, Resulting, Analytics and Revenue Capture: HIMSS-SIIM Collaborative White Paper.

Science.gov (United States)

Cram, Dawn; Roth, Christopher J; Towbin, Alexander J

2016-10-01

The decision to implement an orders-based versus an encounters-based imaging workflow poses various implications to image capture and storage. The impacts include workflows before and after an imaging procedure, electronic health record build, technical infrastructure, analytics, resulting, and revenue. Orders-based workflows tend to favor some imaging specialties while others require an encounters-based approach. The intent of this HIMSS-SIIM white paper is to offer lessons learned from early adopting institutions to physician champions and informatics leadership developing strategic planning and operational rollouts for specialties capturing clinical multimedia.

Development of Radioanalytical and Microanalytical Procedures for the Determination of Actinides in Environmental Samples

International Nuclear Information System (INIS)

Macsik, Zsuzsanna; Vajda, Nora; Bene, Balazs; Varga, Zsolt

2008-01-01

A radio-analytical procedure has been developed for the simultaneous determination of actinides in swipe samples by alpha-spectrometry after the separation of the actinides by extraction chromatography. The procedure is based on the complete decomposition of the sample by destruction with microwave digestion or ashing in furnace. Actinides are separated on an extraction chromatographic column filled with TRU resin (product of Eichrom Industries Inc.). Alpha sources prepared from the separated fractions of americium, plutonium, thorium and uranium are counted by alpha spectrometry. Micro-analytical procedure is being developed for the location and identification of individual particles containing fissile material using solid state nuclear track detectors. The parameters of alpha and fission track detection have been optimized and a procedure has been elaborated to locate the particles on the sample by defining the coordinates of the tracks created by the particles on the track detector. Development of a procedure is planned to separate the located particles using micromanipulator and these particles will be examined individually by different micro- and radio-analytical techniques. (authors)

Development of Radioanalytical and Microanalytical Procedures for the Determination of Actinides in Environmental Samples

Energy Technology Data Exchange (ETDEWEB)

Macsik, Zsuzsanna [Institute of Nuclear Techniques, Moegyetem rakpart 9, H-1111 Budapest (Hungary); Vajda, Nora [RadAnal Ltd., Bimbo ut 119/a, H-1026 Budapest (Hungary); Bene, Balazs [National Institute of Standards and Technology, Gaithersburg, MD 20899 (United States); Varga, Zsolt [Institute of Isotopes, Konkoly-Thege M. ut 29-33, H-1121 Budapest (Hungary)

2008-07-01

A radio-analytical procedure has been developed for the simultaneous determination of actinides in swipe samples by alpha-spectrometry after the separation of the actinides by extraction chromatography. The procedure is based on the complete decomposition of the sample by destruction with microwave digestion or ashing in furnace. Actinides are separated on an extraction chromatographic column filled with TRU resin (product of Eichrom Industries Inc.). Alpha sources prepared from the separated fractions of americium, plutonium, thorium and uranium are counted by alpha spectrometry. Micro-analytical procedure is being developed for the location and identification of individual particles containing fissile material using solid state nuclear track detectors. The parameters of alpha and fission track detection have been optimized and a procedure has been elaborated to locate the particles on the sample by defining the coordinates of the tracks created by the particles on the track detector. Development of a procedure is planned to separate the located particles using micromanipulator and these particles will be examined individually by different micro- and radio-analytical techniques. (authors)

Selecting a Risk-Based SQC Procedure for a HbA1c Total QC Plan.

Science.gov (United States)

Westgard, Sten A; Bayat, Hassan; Westgard, James O

2017-09-01

Recent US practice guidelines and laboratory regulations for quality control (QC) emphasize the development of QC plans and the application of risk management principles. The US Clinical Laboratory Improvement Amendments (CLIA) now includes an option to comply with QC regulations by developing an individualized QC plan (IQCP) based on a risk assessment of the total testing process. The Clinical and Laboratory Standards Institute (CLSI) has provided new practice guidelines for application of risk management to QC plans and statistical QC (SQC). We describe an alternative approach for developing a total QC plan (TQCP) that includes a risk-based SQC procedure. CLIA compliance is maintained by analyzing at least 2 levels of controls per day. A Sigma-Metric SQC Run Size nomogram provides a graphical tool to simplify the selection of risk-based SQC procedures. Current HbA1c method performance, as demonstrated by published method validation studies, is estimated to be 4-Sigma quality at best. Optimal SQC strategies require more QC than the CLIA minimum requirement of 2 levels per day. More complex control algorithms, more control measurements, and a bracketed mode of operation are needed to assure the intended quality of results. A total QC plan with a risk-based SQC procedure provides a simpler alternative to an individualized QC plan. A Sigma-Metric SQC Run Size nomogram provides a practical tool for selecting appropriate control rules, numbers of control measurements, and run size (or frequency of SQC). Applications demonstrate the need for continued improvement of analytical performance of HbA1c laboratory methods.

Towards analytical mix design for large-stone asphalt mixes.

CSIR Research Space (South Africa)

Rust, FC

1992-08-01

Full Text Available This paper addresses the development of an analytically based design procedure for large-aggregate asphalt and its application in thirteen trial sections. The physical and engineering properties of the various materials are discussed and related...

Procedural sedation analgesia

Directory of Open Access Journals (Sweden)

Sheta Saad

2010-01-01

Full Text Available The number of noninvasive and minimally invasive procedures performed outside of the operating room has grown exponentially over the last several decades. Sedation, analgesia, or both may be needed for many of these interventional or diagnostic procedures. Individualized care is important when determining if a patient requires procedural sedation analgesia (PSA. The patient might need an anti-anxiety drug, pain medicine, immobilization, simple reassurance, or a combination of these interventions. The goals of PSA in four different multidisciplinary practices namely; emergency, dentistry, radiology and gastrointestinal endoscopy are discussed in this review article. Some procedures are painful, others painless. Therefore, goals of PSA vary widely. Sedation management can range from minimal sedation, to the extent of minimal anesthesia. Procedural sedation in emergency department (ED usually requires combinations of multiple agents to reach desired effects of analgesia plus anxiolysis. However, in dental practice, moderate sedation analgesia (known to the dentists as conscious sedation is usually what is required. It is usually most effective with the combined use of local anesthesia. The mainstay of success for painless imaging is absolute immobility. Immobility can be achieved by deep sedation or minimal anesthesia. On the other hand, moderate sedation, deep sedation, minimal anesthesia and conventional general anesthesia can be all utilized for management of gastrointestinal endoscopy.

Are joint and soft tissue injections painful? Results of a national French cross-sectional study of procedural pain in rheumatological practice

Directory of Open Access Journals (Sweden)

Poncet Coralie

2010-01-01

Full Text Available Abstract Background Joint, spinal and soft tissue injections are commonly performed by rheumatologists in their daily practice. Contrary to other procedures, e.g. performed in pediatric care, little is known about the frequency, the intensity and the management of procedural pain observed in osteo-articular injections in daily practice. Methods This observational, prospective, national study was carried out among a French national representative database of primary rheumatologists to evaluate the prevalence and intensity of pain caused by intra-and peri-articular injections, synovial fluid aspirations, soft tissue injections, and spinal injections. For each physician, data were collected over 1 month, for up to 40 consecutive patients (>18-years-old for whom a synovial fluid aspiration, an intra or peri-articular injection or a spinal injection were carried out during consultations. Statistical analysis was carried out in order to compare patients who had suffered from pain whilst undergoing the procedure to those who had not. Explanatory analyses were conducted by stepwise logistic regression with the characteristics of the patients to explain the existence of pain. Results Data were analysed for 8446 patients (64% female, mean age 62 ± 14 years recruited by 240 physicians. The predominant sites injected were the knee (45.5% and spine (19.1%. Over 80% of patients experienced procedural pain which was most common in the small joints (42% and spine (32% Pain was severe in 5.3% of patients, moderate in 26.6%, mild in 49.8%, and absent in 18.3%. Pain was significantly more intense in patients with severe pain linked to their underlying pathology and for procedures performed in small joints. Preventative or post-procedure analgesia was rarely given, only to 5.7% and 36.3% of patients, respectively. Preventative analgesia was more frequently prescribed in patients with more severe procedural pain. Conclusion Most patients undergoing intra-or peri

Analytical procedure in aseismic design of eccentric structure using response spectrum

International Nuclear Information System (INIS)

Takemori, T.; Kuwabara, Y.; Suwabe, A.; Mitsunobu, S.

1977-01-01

In this paper, the response are evaluated by the following two methods by the use of the typical torsional analytical models in which masses, rigidities, eccentricities between the centers thereof and several actual earthquake waves are taken as the parameters: (1) the root mean square of responses by using the response spectra derived from the earthquake waves, (2) the time history analysis by using the earthquake wave. The earthquake waves used are chosen to present the different frequency content and magnitude of the response spectra. The typical results derived from the study are as follows: (a) the response accelerations of mass center in the input earthquake direction by the (1) method coincide comparatively well with those by the (2) method, (b) the response accelerations perpendicular to the input earthquake direction by (1) method are 2 to 3 times as much as those by the (2) method, (c) the amplification of the response accelerations at arbitrary points distributed on the spread mass to those of center of the lumped mass by the (1) method are remarkably large compared with those by the (2) method in both directions respectively. These problems on the response spectrum analysis for the above-mentioned eccentric structure are discussed, and an improved analytical method applying the amplification coefficients of responses derived from this parametric time history analysis is proposed to the actual seismic design by the using of the given design ground response spectrum with root mean square technique

SPARTex: A Vertex-Centric Framework for RDF Data Analytics

KAUST Repository

Abdelaziz, Ibrahim

2015-08-31

A growing number of applications require combining SPARQL queries with generic graph search on RDF data. However, the lack of procedural capabilities in SPARQL makes it inappropriate for graph analytics. Moreover, RDF engines focus on SPARQL query evaluation whereas graph management frameworks perform only generic graph computations. In this work, we bridge the gap by introducing SPARTex, an RDF analytics framework based on the vertex-centric computation model. In SPARTex, user-defined vertex centric programs can be invoked from SPARQL as stored procedures. SPARTex allows the execution of a pipeline of graph algorithms without the need for multiple reads/writes of input data and intermediate results. We use a cost-based optimizer for minimizing the communication cost. SPARTex evaluates queries that combine SPARQL and generic graph computations orders of magnitude faster than existing RDF engines. We demonstrate a real system prototype of SPARTex running on a local cluster using real and synthetic datasets. SPARTex has a real-time graphical user interface that allows the participants to write regular SPARQL queries, use our proposed SPARQL extension to declaratively invoke graph algorithms or combine/pipeline both SPARQL querying and generic graph analytics.

Site study plan for geochemical analytical requirements and methodologies: Revision 1

International Nuclear Information System (INIS)

1987-12-01

This site study plan documents the analytical methodologies and procedures that will be used to analyze geochemically the rock and fluid samples collected during Site Characterization. Information relating to the quality aspects of these analyses is also provided, where available. Most of the proposed analytical procedures have been used previously on the program and are sufficiently sensitive to yield high-quality analyses. In a few cases improvements in analytical methodology (e.g., greater sensitivity, fewer interferences) are desired. Suggested improvements to these methodologies are discussed. In most cases these method-development activities have already been initiated. The primary source of rock and fluid samples for geochemical analysis during Site Characterization will be the drilling program, as described in various SRP Site Study Plans. The Salt Repository Project (SRP) Networks specify the schedule under which the program will operate. Drilling will not begin until after site ground water baseline conditions have been established. The Technical Field Services Contractor (TFSC) is responsible for conducting the field program of drilling and testing. Samples and data will be handled and reported in accordance with established SRP procedures. A quality assurance program will be utilized to assure that activities affecting quality are performed correctly and that the appropriate documentation is maintained. 28 refs., 9 figs., 14 tabs

Data mining and business analytics with R

CERN Document Server

Ledolter, Johannes

2013-01-01

Collecting, analyzing, and extracting valuable information from a large amount of data requires easily accessible, robust, computational and analytical tools. Data Mining and Business Analytics with R utilizes the open source software R for the analysis, exploration, and simplification of large high-dimensional data sets. As a result, readers are provided with the needed guidance to model and interpret complicated data and become adept at building powerful models for prediction and classification. Highlighting both underlying concepts and practical computational skills, Data Mining

A Progressive Approach to Teaching Analytics in the Marketing Curriculum

Science.gov (United States)

Liu, Yiyuan; Levin, Michael A.

2018-01-01

With the emerging use of analytics tools and methodologies in marketing, marketing educators have provided students training and experiences beyond the soft skills associated with understanding consumer behavior. Previous studies have only discussed how to apply analytics in course designs, tools, and related practices. However, there is a lack of…

Policies, Procedures, and Practices Regarding Sport-Related Concussion in Community College Athletes.

Science.gov (United States)

Paddack, Michael; DeWolf, Ryan; Covassin, Tracey; Kontos, Anthony

2016-01-01

College sport organizations and associations endorse concussion-management protocols and policies. To date, little information is available on concussion policies and practices at community college institutions. To assess and describe current practices and policies regarding the assessment, management, and return-to-play criteria for sport-related concussion (SRC) among member institutions of the California Community College Athletic Association (CCCAA). Cross-sectional study. Web-based survey. A total of 55 head athletic trainers (ATs) at CCCAA institutions. Data about policies, procedures, and practices regarding SRC were collected over a 3-week period in March 2012 and analyzed using descriptive statistics, the Fisher exact test, and the Spearman test. Almost half (47%) of ATs stated they had a policy for SRC assessment, management, and return to play at their institution. They reported being in compliance with baseline testing guidelines (25%), management guidelines (34.5%), and return-to-play guidelines (30%). Nearly 31% of ATs described having an SRC policy in place for academic accommodations. Conference attendance was positively correlated with institutional use of academic accommodations after SRC (r = 0.44, P = .01). The number of meetings ATs attended and their use of baseline testing were also positively correlated (r = 0.38, P = .01). At the time of this study, nearly half of CCCAA institutions had concussion policies and 31% had academic-accommodation policies. However, only 18% of ATs at CCCAA institutions were in compliance with all of their concussion policies. Our findings demonstrate improvements in the management of SRCs by ATs at California community colleges compared with previous research but a need for better compliance with SRC policies.

MO-F-304-01: Applying PDSA to a Practical Clinical Problem: Variation in Procedural Doses Among Interventional Radiologists

Energy Technology Data Exchange (ETDEWEB)

Jones, A. [UT MD Anderson Cancer Center (United States)

2015-06-15

With the current Maintenance of Certification (MOC) requirement for a practice quality improvement (PQI) project every 3 years, we all (well, most of us) find ourselves searching for projects that are both manageable and likely to have a positive impact on our clinical practice. In this session we will walk through the use of the Plan, Do, Study, Act (PDSA) cycle to address a common finding in practices where fluoroscopically guided interventions (FGI) are performed: variation in procedural doses among physicians. We will also examine strategies to secure physician support using carrots, not sticks. Learning Objectives: Review the PDSA cycle and its application to PQI. Discuss strategies for action in the example presented. Examine strategies for successful group PQI projects. A. Kyle Jones: Owner, FluoroSafety Joseph R. Steele: Consultant, FluoroSafety.

MO-F-304-01: Applying PDSA to a Practical Clinical Problem: Variation in Procedural Doses Among Interventional Radiologists

International Nuclear Information System (INIS)

Jones, A.

2015-01-01

With the current Maintenance of Certification (MOC) requirement for a practice quality improvement (PQI) project every 3 years, we all (well, most of us) find ourselves searching for projects that are both manageable and likely to have a positive impact on our clinical practice. In this session we will walk through the use of the Plan, Do, Study, Act (PDSA) cycle to address a common finding in practices where fluoroscopically guided interventions (FGI) are performed: variation in procedural doses among physicians. We will also examine strategies to secure physician support using carrots, not sticks. Learning Objectives: Review the PDSA cycle and its application to PQI. Discuss strategies for action in the example presented. Examine strategies for successful group PQI projects. A. Kyle Jones: Owner, FluoroSafety Joseph R. Steele: Consultant, FluoroSafety

Determination of Total Carbohydrates in Algal Biomass: Laboratory Analytical Procedure (LAP)

Energy Technology Data Exchange (ETDEWEB)

Van Wychen, Stefanie; Laurens, Lieve M. L.

2016-01-13

This procedure uses two-step sulfuric acid hydrolysis to hydrolyze the polymeric forms of carbohydrates in algal biomass into monomeric subunits. The monomers are then quantified by either HPLC or a suitable spectrophotometric method.

Fast analytical model of MZI micro-opto-mechanical pressure sensor

Science.gov (United States)

Rochus, V.; Jansen, R.; Goyvaerts, J.; Neutens, P.; O’Callaghan, J.; Rottenberg, X.

2018-06-01

This paper presents a fast analytical procedure in order to design a micro-opto-mechanical pressure sensor (MOMPS) taking into account the mechanical nonlinearity and the optical losses. A realistic model of the photonic MZI is proposed, strongly coupled to a nonlinear mechanical model of the membrane. Based on the membrane dimensions, the residual stress, the position of the waveguide, the optical wavelength and the phase variation due to the opto-mechanical coupling, we derive an analytical model which allows us to predict the response of the total system. The effect of the nonlinearity and the losses on the total performance are carefully studied and measurements on fabricated devices are used to validate the model. Finally, a design procedure is proposed in order to realize fast design of this new type of pressure sensor.

Soviet-designed pressurized water reactor symptomatic emergency operating instruction analytical procedure: approach, methodology, development and application

International Nuclear Information System (INIS)

Beelman, R.J.

1999-01-01

A symptom approach to the analytical validation of symptom-based EOPs includes: (1) Identification of critical safety functions to the maintenance of fission product barrier integrity; (2) Identification of the symptoms which manifest an impending challenge to critical safety function maintenance; (3) Development of a symptomatic methodology to delineate bounding plant transient response modes; (4) Specification of bounding scenarios; (5) Development of a systematic calculational approach consistent with the objectives of the methodology; (6) Performance of thermal-hydraulic computer code calculations implementing the analytical methodology; (7) Interpretation of the analytical results on the basis of information available to the operator; (8) Application of the results to the validation of the proposed operator actions; (9) Production of a technical basis document justifying the proposed operator actions. (author)

Application of advanced nuclear and instrumental analytical techniques for characterisation of environmental materials

International Nuclear Information System (INIS)

Sudersanan, M.; Pawaskar, P.B.; Kayasth, S.R.; Kumar, S.C.

2002-01-01

Full text: Increasing realisation about the toxic effects of metal ions in environmental materials has given an impetus to research on analytical techniques for their characterization. The large number of analytes present at very low levels has necessitated the use of sensitive, selective and element specific techniques for their characterization. The concern about precision and accuracy on such analysis, which have socio-economic bearing, has emphasized the use of Certified Reference Materials and the use of multi-technique approach for the unambiguous characterization of analytes. The recent work carried out at Analytical Chemistry Division, BARC on these aspects is presented in this paper. Increasing use of fossil fuels has led to the generation of large quantities of fly ash which pose problems of safe disposal. The utilization of these materials for land filling is an attractive option but the presence of trace amounts of toxic metals like mercury, arsenic, lead etc may cause environmental problems. In view of the inhomogeneous nature of the material, efficient sample processing is an important factor, in addition to the validation of the results by the use of proper standards. Analysis was carried out on flyash samples received as reference materials and also as samples from commercial sources using a combination of both nuclear techniques like INAA and RNAA as well as other techniques like AAS, ICPAES, cold vapour AAS for mercury and hydride generation technique for arsenic. Similar analysis using nuclear techniques was employed for the characterization of air particulates. Biological materials often serve as sensitive indicator materials for pollution measurements. They are also employed for studies on the uptake of toxic metals like U, Th, Cd, Pb, Hg etc. The presence of large amounts of organic materials in them necessitate an appropriate sample dissolution procedure. In view of the possibility of loss of certain analytes like Cd, Hg, As, by high

[The analytical setting of rotary speed of centrifuge rotor and centrifugation time in chemical, biochemical and microbiological practice].

Science.gov (United States)

Zolotarev, K V

2012-08-01

The researchers happen to face with suspensions in their chemical, biochemical and microbiological practice. The suspensions are the disperse systems with solid dispersed phase and liquid dispersion medium and with dispersed phase particle size > 100 nm (10-7 m). Quite often the necessity occurs to separate solid particles from liquid. To use for this purpose the precipitation in gravitation field can make the process to progress too long. In this respect an effective mode is the precipitation in the field of centrifugal forces--the centrifugation. The rotary speed of centrifuge rotor and centrifugation time can be set analytically using regularities of general dynamics and hydrodynamics. To this effect, should be written and transformed the equation of First and Second Newton Laws for suspension particle being in the field of centrifugal forces and forces of resistance of liquid and vessel wall. The force of liquid resistance depends on particle motion condition in liquid. To determine the regimen the Archimedes and Reynolds numerical dimensionless criteria are to be applied. The article demonstrates the results of these transformations as analytical inverse ratio dependence of centrifugation time from rotary speed. The calculation of series of "rate-time" data permits to choose the optimal data pair on the assumption of centrifuge capacity and practical reasonability. The results of calculations are validated by actual experimental data hence the physical mathematical apparatus can be considered as effective one. The setting progress depends both from parameter (Reynolds criterion) and data series calculation. So, the most convenient way to apply this operation is the programming approach. The article proposes to use the program Microsoft Excel and VBA programming language for this purpose. The possibility to download the file from Internet to use it for fast solution is proposed.

Capturing student mathematical engagement through differently enacted classroom practices: applying a modification of Watson's analytical tool

Science.gov (United States)

Patahuddin, Sitti Maesuri; Puteri, Indira; Lowrie, Tom; Logan, Tracy; Rika, Baiq

2018-04-01

This study examined student mathematical engagement through the intended and enacted lessons taught by two teachers in two different middle schools in Indonesia. The intended lesson was developed using the ELPSA learning design to promote mathematical engagement. Based on the premise that students will react to the mathematical tasks in the forms of words and actions, the analysis focused on identifying the types of mathematical engagement promoted through the intended lesson and performed by students during the lesson. Using modified Watson's analytical tool (2007), students' engagement was captured from what the participants' did or said mathematically. We found that teachers' enacted practices had an influence on student mathematical engagement. The teacher who demonstrated content in explicit ways tended to limit the richness of the engagement; whereas the teacher who presented activities in an open-ended manner fostered engagement.

Tailoring intervention procedures to routine primary health care practice; an ethnographic process evaluation

Directory of Open Access Journals (Sweden)

Bruijnzeels Marc

2007-08-01

Full Text Available Abstract Background Tailor-made approaches enable the uptake of interventions as they are seen as a way to overcome the incompatibility of general interventions with local knowledge about the organisation of routine medical practice and the relationship between the patients and the professionals in practice. Our case is the Quattro project which is a prevention programme for cardiovascular diseases in high-risk patients in primary health care centres in deprived neighbourhoods. This programme was implemented as a pragmatic trial and foresaw the importance of local knowledge in primary health care and internal, or locally made, guidelines. The aim of this paper is to show how this prevention programme, which could be tailored to routine care, was implemented in primary care. Methods An ethnographic design was used for this study. We observed and interviewed the researchers and the practice nurses. All the research documents, observations and transcribed interviews were analysed thematically. Results Our ethnographic process evaluation showed that the opportunity of tailoring intervention procedures to routine care in a pragmatic trial setting did not result in a well-organised and well-implemented prevention programme. In fact, the lack of standard protocols hindered the implementation of the intervention. Although it was not the purpose of this trial, a guideline was developed. Despite the fact that the developed guideline functioned as a tool, it did not result in the intervention being organised accordingly. However, the guideline did make tailoring the intervention possible. It provided the professionals with the key or the instructions needed to achieve organisational change and transform the existing interprofessional relations. Conclusion As tailor-made approaches are developed to enable the uptake of interventions in routine practice, they are facilitated by the brokering of tools such as guidelines. In our study, guidelines facilitated

Assessment of analytical techniques for characterization of crystalline clopidogrel forms in patent applications

Directory of Open Access Journals (Sweden)

Luiz Marcelo Lira

2014-04-01

Full Text Available The aim of this study was to evaluate two important aspects of patent applications of crystalline forms of drugs: (i the physicochemical characterization of the crystalline forms; and (ii the procedure for preparing crystals of the blockbuster drug clopidogrel. To this end, searches were conducted using online patent databases. The results showed that: (i the majority of patent applications for clopidogrel crystalline forms failed to comply with proposed Brazilian Patent Office guidelines. This was primarily due to insufficient number of analytical techniques evaluating the crystalline phase. In addition, some patent applications lacked assessment of chemical/crystallography purity; (ii use of more than two analytical techniques is important; and (iii the crystallization procedure for clopidogrel bisulfate form II were irreproducible based on the procedure given in the patent application.

Painful procedures and analgesia in the NICU: what has changed in the medical perception and practice in a ten‐year period?

Directory of Open Access Journals (Sweden)

Ana Claudia Yoshikumi Prestes

2016-01-01

Conclusions: Despite an increase in the medical perception of neonatal pain and in analgesic use during painful procedures, the gap between clinical practice and neonatologist perception of analgesia need did not change during the ten‐year period.

Big Data Analytics in Healthcare.

Science.gov (United States)

Belle, Ashwin; Thiagarajan, Raghuram; Soroushmehr, S M Reza; Navidi, Fatemeh; Beard, Daniel A; Najarian, Kayvan

2015-01-01

The rapidly expanding field of big data analytics has started to play a pivotal role in the evolution of healthcare practices and research. It has provided tools to accumulate, manage, analyze, and assimilate large volumes of disparate, structured, and unstructured data produced by current healthcare systems. Big data analytics has been recently applied towards aiding the process of care delivery and disease exploration. However, the adoption rate and research development in this space is still hindered by some fundamental problems inherent within the big data paradigm. In this paper, we discuss some of these major challenges with a focus on three upcoming and promising areas of medical research: image, signal, and genomics based analytics. Recent research which targets utilization of large volumes of medical data while combining multimodal data from disparate sources is discussed. Potential areas of research within this field which have the ability to provide meaningful impact on healthcare delivery are also examined.

Determination of Total Solids and Ash in Algal Biomass: Laboratory Analytical Procedure (LAP)

Energy Technology Data Exchange (ETDEWEB)

Van Wychen, Stefanie; Laurens, Lieve M. L.

2016-01-13

This procedure describes the methods used to determine the amount of moisture or total solids present in a freeze-dried algal biomass sample, as well as the ash content. A traditional convection oven drying procedure is covered for total solids content, and a dry oxidation method at 575 deg. C is covered for ash content.

Rapid radiochemical procedures for a process support laboratory

International Nuclear Information System (INIS)

Beals, D.M.

1998-01-01

An on-site mobile laboratory has been installed near a groundwater treatment facility, and rapid analytical procedures have been deployed for determining sample activity in the process support laboratory. The required analyses to support the remediation project include gross alpha/, gross nonvolatile beta, 90 Sr, 99 Tc, 137 Cs and total Ra (226 + 228). The present mission of the Savannah River Site (SRS), a US Department of Energy nuclear production facility, is one of nuclear waste stabilization and of environmental restoration and remediation. Because of previous practices of disposing low-level radioactive waste to seepage basins, some of the groundwater under the SRS has become contaminated with radioactive species. A water treatment facility has been installed to remediate the groundwater below the old F and H areas' seepage basins. Groundwater is pumped from the contaminated aquifer through a series of filtration, ion exchange, and reverse osmosis steps and when cleaned is reinjected back into the aquifer. Samples are pulled from various points in the treatment facility to ensure that the process is working as designed. In order to minimize turnaround time for these analyses, a process control station (i.e., a mobile on-site laboratory) has been installed at the F area water treatment unit, and rapid radioanalytical procedures have been deployed

Near-critical carbon dioxide extraction and liquid chromatography determination of UV filters in solid cosmetic samples: a green analytical procedure.

Science.gov (United States)

Salvador, Amparo; Chisvert, Alberto; Jaime, Maria-Angeles

2005-11-01

Near-critical carbon dioxide extraction of four UV filters used as sunscreens in lipsticks and makeup formulations is reported. Extraction parameters were optimized. Efficient recoveries were obtained after 15 min of dynamic extraction with a 80:20 CO2/ethanol mixture at 300 atm and 54 degrees C, using a 1.8 mL/min flow rate. Extracts were collected in ethanol, and appropriately diluted with ethanol and 1% acetic acid to obtain a 70:30 v/v ethanol/1% acetic acid solution. The four UV filters were determined by LC with gradient elution using ethanol/1% acetic acid as mobile phase. The accuracy of the analytical procedure was estimated by comparing the results with those obtained by methods based on classical extraction. The proposed method only requires the use of CO2, ethanol and acetic acid avoiding the use of more toxic organic solvents, thus it could be considered as both operator and environment friendly.

21 CFR 211.150 - Distribution procedures.

Science.gov (United States)

2010-04-01

...: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Holding and Distribution § 211.150 Distribution procedures. Written procedures shall be established, and followed, describing the... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Distribution procedures. 211.150 Section 211.150...

Current practice of transradial approach for coronary procedures: A survey by the Italian Society of Interventional Cardiology (SICI-GISE) and the Italian Radial Club

International Nuclear Information System (INIS)

Rigattieri, Stefano; Valsecchi, Orazio; Sciahbasi, Alessandro; Tomassini, Francesco; Limbruno, Ugo; Marchese, Alfredo; La Manna, Alessio; Mauro, Ciro; Varbella, Ferdinando; Berti, Segio; Tarantino, Fabio F.; Musumeci, Giuseppe

2017-01-01

Background: Transradial approach (TRA) for percutaneous coronary procedures is associated with improved patient outcome and is being increasingly adopted worldwide. We surveyed Italian interventional cardiologists in order to take a snapshot of the current practice of TRA. Methods: A web-based questionnaire was emailed to all members of the Italian Society of Interventional Cardiology. Results: The survey was taken by 508 respondents. Cardiogenic shock and chronic total occlusions represented the principal limitations to TRA. Right TRA was the default approach for 81% of respondents. Both diagnostic and interventional procedures were routinely performed through 6 Fr sheaths (83% and 93%, respectively); dedicated TRA curves were used in 11% of diagnostic and in about 3% of interventional procedures. Almost 70% of the operators did not assess dual hand circulation. In case of crossover, the contralateral radial artery was the preferred site (57%). Radial artery hemostasis was mostly achieved by pneumatic bracelet (64%) and patency of the radial artery during hemostasis was ensured in 60% of cases. Pre-discharge patency of the radial artery was routinely assessed by almost 60% of respondents. For diagnostic procedures, adequate heparin anticoagulation (5000 IU) was only given by 45% of operators. Most respondents believed that TRA is associated with greater radiation exposure for both the patient (82%) and the operator (98%) as compared to transfemoral approach. Conclusions: This survey provides contemporary data about the adoption of TRA in Italy and gives interesting insights about several technical and clinical issues related to the practice of this vascular approach for coronary procedures. - Highlights: • Transradial approach for coronary procedures is becoming increasingly popular. • We conducted a survey on the contemporary practice of transradial approach in Italy. • We appraised several clinical and technical issues related to transradial approach.

Current practice of transradial approach for coronary procedures: A survey by the Italian Society of Interventional Cardiology (SICI-GISE) and the Italian Radial Club

Energy Technology Data Exchange (ETDEWEB)

Rigattieri, Stefano, E-mail: stefanorigattieri@yahoo.it [Interventional Cardiology Unit, Sandro Pertini Hospital, Roma (Italy); Valsecchi, Orazio [Cardiovascular Department, Papa Giovanni XXIII Hospital, Bergamo (Italy); Sciahbasi, Alessandro [Interventional Cardiology Unit, Sandro Pertini Hospital, Roma (Italy); Tomassini, Francesco [Cardiology Department, Ospedale degli Infermi, Rivoli (Italy); Limbruno, Ugo [Cardiology Unit, Azienda USL Toscana Sudest, Grosseto (Italy); Marchese, Alfredo [Interventional Cardiology Unit, Anthea Hospital, GVM Care & Research, Bari (Italy); La Manna, Alessio [Cardiovascular Department, Ferrarotto Hospital, University of Catania (Italy); Mauro, Ciro [Cardiovascular Department, Cardarelli Hospital, Napoli (Italy); Varbella, Ferdinando [Cardiology Department, Ospedale degli Infermi, Rivoli (Italy); Berti, Segio [Department of Cardiology, Fondazione Toscana “Gabriele Monasterio”, Ospedale del Cuore, Massa (Italy); Tarantino, Fabio F. [Cardiology Unit, Ospedale G.B. Morgagni-L. Pierantoni, Forlì (Italy); Musumeci, Giuseppe [Cardiovascular Department, Papa Giovanni XXIII Hospital, Bergamo (Italy)

2017-04-15

Background: Transradial approach (TRA) for percutaneous coronary procedures is associated with improved patient outcome and is being increasingly adopted worldwide. We surveyed Italian interventional cardiologists in order to take a snapshot of the current practice of TRA. Methods: A web-based questionnaire was emailed to all members of the Italian Society of Interventional Cardiology. Results: The survey was taken by 508 respondents. Cardiogenic shock and chronic total occlusions represented the principal limitations to TRA. Right TRA was the default approach for 81% of respondents. Both diagnostic and interventional procedures were routinely performed through 6 Fr sheaths (83% and 93%, respectively); dedicated TRA curves were used in 11% of diagnostic and in about 3% of interventional procedures. Almost 70% of the operators did not assess dual hand circulation. In case of crossover, the contralateral radial artery was the preferred site (57%). Radial artery hemostasis was mostly achieved by pneumatic bracelet (64%) and patency of the radial artery during hemostasis was ensured in 60% of cases. Pre-discharge patency of the radial artery was routinely assessed by almost 60% of respondents. For diagnostic procedures, adequate heparin anticoagulation (5000 IU) was only given by 45% of operators. Most respondents believed that TRA is associated with greater radiation exposure for both the patient (82%) and the operator (98%) as compared to transfemoral approach. Conclusions: This survey provides contemporary data about the adoption of TRA in Italy and gives interesting insights about several technical and clinical issues related to the practice of this vascular approach for coronary procedures. - Highlights: • Transradial approach for coronary procedures is becoming increasingly popular. • We conducted a survey on the contemporary practice of transradial approach in Italy. • We appraised several clinical and technical issues related to transradial approach.

Characterization of Analytical Reference Glass-1 (ARG-1)

International Nuclear Information System (INIS)

Smith, G.L.

1993-12-01

High-level radioactive waste may be immobilized in borosilicate glass at the West Valley Demonstration Project, West Valley, New York, the Defense Waste Processing Facility (DWPF), Aiken, South Carolina, and the Hanford Waste Vitrification Project (HWVP), Richland, Washington. The vitrified waste form will be stored in stainless steel canisters before its eventual transfer to a geologic repository for long-term disposal. Waste Acceptance Product Specifications (WAPS) (DOE 1993), Section 1.1.2 requires that the waste form producers must report the measured chemical composition of the vitrified waste in their production records before disposal. Chemical analysis of glass waste forms is receiving increased attention due to qualification requirements of vitrified waste forms. The Pacific Northwest Laboratory (PNL) has been supporting the glass producers' analytical laboratories by a continuing program of multilaboratory analytical testing using interlaboratory ''round robin'' methods. At the PNL Materials Characterization Center Analytical Round Robin 4 workshop ''Analysis of Nuclear Waste Glass and Related Materials,'' January 16--17, 1990, Pleasanton, California, the meeting attendees decided that simulated nuclear waste analytical reference glasses were needed for use as analytical standards. Use of common standard analytical reference materials would allow the glass producers' analytical laboratories to calibrate procedures and instrumentation, to control laboratory performance and conduct self-appraisals, and to help qualify their various waste forms

Safety and quality of food contact materials. Part 1: evaluation of analytical strategies to introduce migration testing into good manufacturing practice.

Science.gov (United States)

Feigenbaum, A; Scholler, D; Bouquant, J; Brigot, G; Ferrier, D; Franzl, R; Lillemarktt, L; Riquet, A M; Petersen, J H; van Lierop, B; Yagoubi, N

2002-02-01

The results of a research project (EU AIR Research Programme CT94-1025) aimed to introduce control of migration into good manufacturing practice and into enforcement work are reported. Representative polymer classes were defined on the basis of chemical structure, technological function, migration behaviour and market share. These classes were characterized by analytical methods. Analytical techniques were investigated for identification of potential migrants. High-temperature gas chromatography was shown to be a powerful method and 1H-magnetic resonance provided a convenient fingerprint of plastic materials. Volatile compounds were characterized by headspace techniques, where it was shown to be essential to differentiate volatile compounds desorbed from those generated during the thermal desorption itself. For metal trace analysis, microwave mineralization followed by atomic absorption was employed. These different techniques were introduced into a systematic testing scheme that is envisaged as being suitable both for industrial control and for enforcement laboratories. Guidelines will be proposed in the second part of this paper.

Communication practices that encourage and constrain shared decision making in health-care encounters: Systematic review of conversation analytic research.

Science.gov (United States)

Land, Victoria; Parry, Ruth; Seymour, Jane

2017-12-01

Shared decision making (SDM) is generally treated as good practice in health-care interactions. Conversation analytic research has yielded detailed findings about decision making in health-care encounters. To map decision making communication practices relevant to health-care outcomes in face-to-face interactions yielded by prior conversation analyses, and to examine their function in relation to SDM. We searched nine electronic databases (last search November 2016) and our own and other academics' collections. Published conversation analyses (no restriction on publication dates) using recordings of health-care encounters in English where the patient (and/or companion) was present and where the data and analysis focused on health/illness-related decision making. We extracted study characteristics, aims, findings relating to communication practices, how these functioned in relation to SDM, and internal/external validity issues. We synthesised findings aggregatively. Twenty-eight publications met the inclusion criteria. We sorted findings into 13 types of communication practices and organized these in relation to four elements of decision-making sequences: (i) broaching decision making; (ii) putting forward a course of action; (iii) committing or not (to the action put forward); and (iv) HCPs' responses to patients' resistance or withholding of commitment. Patients have limited opportunities to influence decision making. HCPs' practices may constrain or encourage this participation. Patients, companions and HCPs together treat and undertake decision making as shared, though to varying degrees. Even for non-negotiable treatment trajectories, the spirit of SDM can be invoked through practices that encourage participation (eg by bringing the patient towards shared understanding of the decision's rationale). © 2017 The Authors Health Expectations Published by John Wiley & Sons Ltd.

The analyst's anxieties in the first interview: barriers against analytic presence.

Science.gov (United States)

Møller, Mette

2014-06-01

To answer the questions: why don't more people enter analysis and how do we get more people to do so? Attention is drawn to anxieties in the analyst that become obstacles to the initiation of analysis. The main focus of the paper is how to understand why analysts, irrespective of patient characteristics, seem to have resistances against embarking on analysis. Being a meeting between strangers the consultation activates strong emotional reactions in both parties. One way of coping is defensively to diagnose, assess and exclude instead of being present as an analyst. The analytic frame of a consultation is ambiguous, and a secure analytic function is needed in order to meet the openness and unpredictability of this frame. A fragile psychoanalytic identity is seen as central to analysts' failure to create an analytic practice; it takes years to develop and maintain a robust analytic function, and analytic work continues to cause disturbing emotional reactions in the analyst. Analysts' vulnerable identity is also linked to the history of psychoanalysis that has fostered an ideal of analytic practice that is omnipotent and impossible to reach. Therefore it is no wonder that attempts to reach a convinced recommendation of analysis can become diverted in the process of consultation. Confronting these inner impediments in order to strengthen the analytic identity is suggested as a better way to get more analytic patients than to keep looking for so-called analysability in patients. Copyright © 2014 Institute of Psychoanalysis.

Protecting your practice.

Science.gov (United States)

Kerr, Joseph

2015-01-01

Dentists have much invested in their practices. They need to protect their practices from fraud and noncompliance. The author provides practical suggestions for how to significantly reduce the risk of fraud and theft in the practice without disrupting day-to-day operations. By adhering to nonintrusive policy and procedure changes, dental practice owners can reduce inherent risks of fraud and theft, while increasing financial and human resource knowledge regarding their practice. Practice owners with the appropriate policies and procedures benefit from significantly lower risk of loss from fraud and theft. Furthermore, they have a better understanding of their practice's finances and human resources. Copyright © 2015 American Dental Association. Published by Elsevier Inc. All rights reserved.

A comparison of analytic procedures for measurement of fractional dextran clearances

NARCIS (Netherlands)

Hemmelder, MH; de Jong, PE; de Zeeuw, D

Fractional dextran clearances have been extensively used to study glomerular size selectivity. We report on an analysis of different laboratory procedures involved in measuring fractional dextran clearances. The deproteinization of plasma samples by 20% trichloroacetic acid (TCA) revealed a protein

Analytical investigations closer to the patient.

OpenAIRE

Watson, D

1980-01-01

Do-it-yourself bioanalytical equipment that requires no analytical skill to operate is currently available for use in intensive care units, operating suites, side wards, health centres, clinics, general practitioners' surgeries, etc. Agreement is needed between the laboratory consultant and doctors and others using laboratory-type equipment and reagents in near-bedside analyses for diagnosis, clinical management, or health screening of their patients. Choice and safety of method procedure, op...

CMOS voltage references an analytical and practical perspective

CERN Document Server

Kok, Chi-Wah

2013-01-01

A practical overview of CMOS circuit design, this book covers the technology, analysis, and design techniques of voltage reference circuits.  The design requirements covered follow modern CMOS processes, with an emphasis on low power, low voltage, and low temperature coefficient voltage reference design. Dedicating a chapter to each stage of the design process, the authors have organized the content to give readers the tools they need to implement the technologies themselves. Readers will gain an understanding of device characteristics, the practical considerations behind circuit topology,

Methodological procedures and analytical instruments to evaluate an indicators integrated archive for urban management; Guida metodologica per la costruzione di un archivio integrato di indicatori urbani

Energy Technology Data Exchange (ETDEWEB)

Del Ciello, R; Napoleoni, S [ENEA, Centro Ricerche Casaccia, Rome (Italy). Dipt. Ambiente

1998-07-01

This guide provides the results of a research developed at ENEA (National Agency for new Technology, Energy and the Environment) Casaccia center (Rome, Italy) aimed to define methodological procedures and analytical instruments needed to carry out an indicators integrated archive for urban management. The guide also defines the scheme of a negotiation process aimed to reach and exchange data and information among governmental and local administrations, non-governmental organizations and scientific bodies. [Italian] Il lavoro presenta una sintesi dei risultati di una ricerca condotta presso il C.R. Casaccia dell'ENEA, relativia alla definizione di procedure metodologiche e strumenti di analisi ed elaborazione per realizzare un archivio integrato di indicatori per la gestione dei sistemi urbani. La guida, rivolta ai responsabili delle politiche urbane, deifinisce uno schema dei processi di condivisione degli indicatori urbani attraverso l'organizzazione di opportuni tavoli negoziali, costituiti da rappresentanti delle amministrazioni locali, dell'amministrazione centrale, delle categorie produttive e sociali e delle strutture tecniche operanti sul territorio.

Methodological procedures and analytical instruments to evaluate an indicators integrated archive for urban management; Guida metodologica per la costruzione di un archivio integrato di indicatori urbani

Energy Technology Data Exchange (ETDEWEB)

Del Ciello, R.; Napoleoni, S. [ENEA, Centro Ricerche Casaccia, Rome (Italy). Dipt. Ambiente

1998-07-01

This guide provides the results of a research developed at ENEA (National Agency for new Technology, Energy and the Environment) Casaccia center (Rome, Italy) aimed to define methodological procedures and analytical instruments needed to carry out an indicators integrated archive for urban management. The guide also defines the scheme of a negotiation process aimed to reach and exchange data and information among governmental and local administrations, non-governmental organizations and scientific bodies. [Italian] Il lavoro presenta una sintesi dei risultati di una ricerca condotta presso il C.R. Casaccia dell'ENEA, relativia alla definizione di procedure metodologiche e strumenti di analisi ed elaborazione per realizzare un archivio integrato di indicatori per la gestione dei sistemi urbani. La guida, rivolta ai responsabili delle politiche urbane, deifinisce uno schema dei processi di condivisione degli indicatori urbani attraverso l'organizzazione di opportuni tavoli negoziali, costituiti da rappresentanti delle amministrazioni locali, dell'amministrazione centrale, delle categorie produttive e sociali e delle strutture tecniche operanti sul territorio.

Pretreatment procedures applied to samples to be analysed by neutron activation analysis at CDTN/CNEN

International Nuclear Information System (INIS)

Francisco, Dovenir; Menezes, Maria Angela de Barros Correia

2009-01-01

The neutron activation technique - using several methods - has been applied in 80% of the analytical demand of Division for Reactor and Analytical Techniques at CDTN/CNEN, Belo Horizonte, Minas Gerais. This scenario emphasizes the responsibility of the Laboratory to provide and assure the quality of the measurements. The first step to assure the results quality is the preparation of the samples. Therefore, this paper describes the experimental procedures adopted at CDTN/CNEN in order to uniform conditions of analysis and to avoid contaminations by elements present everywhere. Some of the procedures are based on methods described in the literature; others are based on many years of experience preparing samples from many kinds of matrices. The procedures described are related to geological material - soil, sediment, rock, gems, clay, archaeological ceramics and ore - biological materials - hair, fish, plants, food - water, etc. Analytical results in sediment samples are shown as n example pointing out the efficiency of the experimental procedure. (author)

Automated Predictive Big Data Analytics Using Ontology Based Semantics.

Science.gov (United States)

Nural, Mustafa V; Cotterell, Michael E; Peng, Hao; Xie, Rui; Ma, Ping; Miller, John A

2015-10-01

Predictive analytics in the big data era is taking on an ever increasingly important role. Issues related to choice on modeling technique, estimation procedure (or algorithm) and efficient execution can present significant challenges. For example, selection of appropriate and optimal models for big data analytics often requires careful investigation and considerable expertise which might not always be readily available. In this paper, we propose to use semantic technology to assist data analysts and data scientists in selecting appropriate modeling techniques and building specific models as well as the rationale for the techniques and models selected. To formally describe the modeling techniques, models and results, we developed the Analytics Ontology that supports inferencing for semi-automated model selection. The SCALATION framework, which currently supports over thirty modeling techniques for predictive big data analytics is used as a testbed for evaluating the use of semantic technology.

Extending Practical Pre-Aggregation in On-Line Analytical Processing

DEFF Research Database (Denmark)

Pedersen, Torben Bach; Jensen, Christian Søndergaard; Dyreson, Curtis E.

On-Line Analytical Processing (OLAP) based on a dimensional view of data is being used increasingly in traditional business applications as well as in applications such as health care for the purpose of analyzing very large amounts of data. Pre-aggregation, the prior materialization of aggregate...... select combinations of aggregates and then re-use these for efficiently computing other aggregates. However, this re-use of aggregates is contingent on the dimension hierarchies and the relationships between facts and dimensions satisfying stringent constraints. This severely limits the scope...

Integrating Water Quality and River Rehabilitation Management - A Decision-Analytical Perspective

Science.gov (United States)

Reichert, P.; Langhans, S.; Lienert, J.; Schuwirth, N.

2009-04-01

Integrative river management involves difficult decisions about alternative measures to improve their ecological state. For this reason, it seems useful to apply knowledge from the decision sciences to support river management. We discuss how decision-analytical elements can be employed for designing an integrated river management procedure. An important aspect of this procedure is to clearly separate scientific predictions of the consequences of alternatives from objectives to be achieved by river management. The key elements of the suggested procedure are (i) the quantitative elicitation of the objectives from different stakeholder groups, (ii) the compilation of the current scientific knowledge about the consequences of the effects resulting from suggested measures in the form of a probabilistic mathematical model, and (iii) the use of these predictions and valuations to prioritize alternatives, to uncover conflicting objectives, to support the design of better alternatives, and to improve the transparency of communication about the chosen management strategy. The development of this procedure led to insights regarding necessary steps to be taken for rational decision-making in river management, to guidelines about the use of decision-analytical techniques for performing these steps, but also to new insights about the application of decision-analytical techniques in general. In particular, the consideration of the spatial distribution of the effects of measures and the potential added value of connected rehabilitated river reaches leads to favoring measures that have a positive effect beyond a single river reach. As these effects only propagate within the river network, this results in a river basin oriented management concept as a consequence of a rational decision support procedure, rather than as an a priori management paradigm. There are also limitations to the support that can be expected from the decision-analytical perspective. It will not provide the

Introduction to Quality Management for EDXRF Practice

International Nuclear Information System (INIS)

2012-01-01

The accelerated development of analytical methodologies during the last decades makes the analytical practice a field where competitiveness is ultimately defined by the confidence of the customers, based on their acceptance of the services provided. The IAEA assists its Member States laboratories to effectively utilize nuclear spectrometries for analytical services in environmental monitoring and other applications including nuclear energy systems-related needs. To support the IAEA Member States efforts the Agency implements various types of activities including production and distribution of reference materials, development of standardized analytical methods, conducting interlaboratory comparisons and proficiency tests as tools for quality control and provision of specialized training in Quality Management and Quality Control topics. This learning module was developed within the IAEA Project 1.4.3.4 (D.3.03) Nuclear Spectrometry for Analytical Applications, under the Nuclear Science Programme. The main objective of the Project is to enhance capability of interested Member States in effective utilization of nuclear spectrometries and analytical services in industry, human health, agriculture, and monitoring and evaluation of environmental pollution. The module aims at providing practical guidelines for the organization of work and quality management practice in x-ray fluorescence laboratories in IAEA Member States. The target users include the managers and technical staff of the analytical laboratories.

Marketing analytics for Free-to-Play Games

OpenAIRE

Kuokka, Ari

2013-01-01

This thesis deals with free to play marketing analytics in the light of mobile iOS games. Other platforms will be also discussed as well as mobile marketing aspects such as user acquisition, big data and metrics. The case company is a Finnish game startup which is about to release their first game The Supernauts. The objective of this thesis was to research what kind of analytics and metrics are needed in the marketing of free-to-play games as well as to examine what are the best practices...

5 keys to business analytics program success

CERN Document Server

Boyer, John; Green, Brian; Harris, Tracy; Van De Vanter, Kay

2012-01-01

With business analytics is becoming increasingly strategic to all types of organizations and with many companies struggling to create a meaningful impact with this emerging technology, this work-based on the combined experience of 10 organizations that display excellence and expertise on the subject-shares the best practices, discusses the management aspects and sociology that drives success, and uncovers the five key aspects behind the success of some of the top business analytics programs in the industry. Readers will learn about numerous topics, including how to create and manage a changing

Strain accumulation in a prototypic lmfbr nozzle: Experimental and analytical correlation

International Nuclear Information System (INIS)

Woodward, W.S.; Dhalia, A.K.; Berton, P.A.

1986-01-01

At an early stage in the design of the primary inlet nozzle for the Intermediate Heat Exchanger (IHX) of the Fast Flux Test Facility (FFTF), it was predicted that the inelastic strain accumulation during elevated temperature operation (1050 0 F/566 0 C) would exceed the ASME Code design allowables. Therefore, a proof test of a prototypic FFTF IHX nozzle was performed in the Westinghouse Creep Ratcheting Test Facility (CRTF) to measure the ratchet strain increments during the most severe postulated FFTF plant thermal transients. In addition, analytical procedures similar to those used in the plant design, were used to predict strain accumulation in the CRTF nozzle. This paper describes how the proof test was successfully completed, and it shows that both the test measurements and analytical predictions confirm that the FFTF IHX nozzle, subjected to postulated thermal and mechanical loadings, complies with the ASME Code strain limits. Also, these results provide a measure of validation for the analytical procedures used in the design of FFTF as well as demonstrate the structural adequacy of the FFTF IHX primary inlet nozzle

Means of Evidence and Evidence Collection in Contested Procedure in Kosovo

Directory of Open Access Journals (Sweden)

Mr.Sc. Makfirete Krasniqi

2015-12-01

Full Text Available The purpose of this paper is to serve as a helpful tool for students, jurists, lawyers, judges and others, in the profesional and scientific aspect. In ruling a contested procedure in a professional manner, the court has to find the truth, so that the contested procedure is most efficient until reaching the final verdict. In my research, I intend to enrich the science with my knowledge in the field of contested procedure. In this study I have used analytical, comparative, synthesis, generalization and other methods. Those reading this paper will understand how evidence is the most important part in a fair trial, since failure to prove claims very often leads towards an incorrect situation; they will understand how difficult and painful would be forfeiting rights for the litigating party, which would lead to serious changes, such as losing property, losing a job, compensation of personal income, compensation for damage caused. The paper in itself contains deposited evidence, which maintain the level of estimation from the court in order to make a judgment in a contested procedure with a court verdict. In this paper I present the subject of: “Means of evidence and evidence collection in contested procedure”, where I have tried to research the theory but also the practice in contested proceedings, addressing the positive aspects, the deficiencies and novelties. In the legal provisions of the Law on Contested Procedure of theRepublicofKosovo, no. 03/L-006, of 30 June 2008, and Law no. 04/L-118, of 13 September 2012, on amendments to the Law on Contested Procedure, evidentiary means and evidence collection are included in chapter XXII.

SRC-I demonstration plant analytical laboratory methods manual. Final technical report

Energy Technology Data Exchange (ETDEWEB)

Klusaritz, M.L.; Tewari, K.C.; Tiedge, W.F.; Skinner, R.W.; Znaimer, S.

1983-03-01

This manual is a compilation of analytical procedures required for operation of a Solvent-Refined Coal (SRC-I) demonstration or commercial plant. Each method reproduced in full includes a detailed procedure, a list of equipment and reagents, safety precautions, and, where possible, a precision statement. Procedures for the laboratory's environmental and industrial hygiene modules are not included. Required American Society for Testing and Materials (ASTM) methods are cited, and ICRC's suggested modifications to these methods for handling coal-derived products are provided.

A procedure for the determination of Po-210 in water samples by alpha spectrometry

International Nuclear Information System (INIS)

2009-01-01

Reliable, comparable and 'fit for purpose' results are an essential requirement for any decision based on analytical measurements. For the analyst, the availability of tested and validated analytical procedures is a extremely important tool for production of such analytical measurements. For maximum utility, such procedures should be comprehensive, clearly formulated, and readily available to both the analyst and the customer for reference. Since 2004 the Environment programme of the IAEA has included activities aimed at the development of a set of procedures for the determination of radionuclides in terrestrial environmental samples. In the case of 210 Po, this started with the collection and review of about 130 papers from the scientific literature. Based on this review, two candidate methods for the chemical separation of 210 Po from water samples were selected for testing, refinement and validation in accordance with ISO guidelines. A comprehensive methodology for calculation of results including quantification of measurement uncertainty was also developed. This report presents the final procedure which was developed based on that work

Pre-analytical issues in the haemostasis laboratory: guidance for the clinical laboratories.

Science.gov (United States)

Magnette, A; Chatelain, M; Chatelain, B; Ten Cate, H; Mullier, F

2016-01-01

Ensuring quality has become a daily requirement in laboratories. In haemostasis, even more than in other disciplines of biology, quality is determined by a pre-analytical step that encompasses all procedures, starting with the formulation of the medical question, and includes patient preparation, sample collection, handling, transportation, processing, and storage until time of analysis. This step, based on a variety of manual activities, is the most vulnerable part of the total testing process and is a major component of the reliability and validity of results in haemostasis and constitutes the most important source of erroneous or un-interpretable results. Pre-analytical errors may occur throughout the testing process and arise from unsuitable, inappropriate or wrongly handled procedures. Problems may arise during the collection of blood specimens such as misidentification of the sample, use of inadequate devices or needles, incorrect order of draw, prolonged tourniquet placing, unsuccessful attempts to locate the vein, incorrect use of additive tubes, collection of unsuitable samples for quality or quantity, inappropriate mixing of a sample, etc. Some factors can alter the result of a sample constituent after collection during transportation, preparation and storage. Laboratory errors can often have serious adverse consequences. Lack of standardized procedures for sample collection accounts for most of the errors encountered within the total testing process. They can also have clinical consequences as well as a significant impact on patient care, especially those related to specialized tests as these are often considered as "diagnostic". Controlling pre-analytical variables is critical since this has a direct influence on the quality of results and on their clinical reliability. The accurate standardization of the pre-analytical phase is of pivotal importance for achieving reliable results of coagulation tests and should reduce the side effects of the influence

The Ethics of Using Learning Analytics to Categorize Students on Risk

Science.gov (United States)

Scholes, Vanessa

2016-01-01

There are good reasons for higher education institutions to use learning analytics to risk-screen students. Institutions can use learning analytics to better predict which students are at greater risk of dropping out or failing, and use the statistics to treat "risky" students differently. This paper analyses this practice using…

40 CFR 86.211-94 - Exhaust gas analytical system.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Exhaust gas analytical system. 86.211-94 Section 86.211-94 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... New Medium-Duty Passenger Vehicles; Cold Temperature Test Procedures § 86.211-94 Exhaust gas...

Nationwide Multicenter Reference Interval Study for 28 Common Biochemical Analytes in China.

Science.gov (United States)

Xia, Liangyu; Chen, Ming; Liu, Min; Tao, Zhihua; Li, Shijun; Wang, Liang; Cheng, Xinqi; Qin, Xuzhen; Han, Jianhua; Li, Pengchang; Hou, Li'an; Yu, Songlin; Ichihara, Kiyoshi; Qiu, Ling

2016-03-01

A nationwide multicenter study was conducted in the China to explore sources of variation of reference values and establish reference intervals for 28 common biochemical analytes, as a part of the International Federation of Clinical Chemistry and Laboratory Medicine, Committee on Reference Intervals and Decision Limits (IFCC/C-RIDL) global study on reference values. A total of 3148 apparently healthy volunteers were recruited in 6 cities covering a wide area in China. Blood samples were tested in 2 central laboratories using Beckman Coulter AU5800 chemistry analyzers. Certified reference materials and value-assigned serum panel were used for standardization of test results. Multiple regression analysis was performed to explore sources of variation. Need for partition of reference intervals was evaluated based on 3-level nested ANOVA. After secondary exclusion using the latent abnormal values exclusion method, reference intervals were derived by a parametric method using the modified Box-Cox formula. Test results of 20 analytes were made traceable to reference measurement procedures. By the ANOVA, significant sex-related and age-related differences were observed in 12 and 12 analytes, respectively. A small regional difference was observed in the results for albumin, glucose, and sodium. Multiple regression analysis revealed BMI-related changes in results of 9 analytes for man and 6 for woman. Reference intervals of 28 analytes were computed with 17 analytes partitioned by sex and/or age. In conclusion, reference intervals of 28 common chemistry analytes applicable to Chinese Han population were established by use of the latest methodology. Reference intervals of 20 analytes traceable to reference measurement procedures can be used as common reference intervals, whereas others can be used as the assay system-specific reference intervals in China.

Analytical considerations in the code qualification of piping systems

International Nuclear Information System (INIS)

Antaki, G.A.

1995-01-01

The paper addresses several analytical topics in the design and qualification of piping systems which have a direct bearing on the prediction of stresses in the pipe and hence on the application of the equations of NB, NC and ND-3600 of the ASME Boiler and Pressure Vessel Code. For each of the analytical topics, the paper summarizes the current code requirements, if any, and the industry practice

Waste minimization in analytical methods

International Nuclear Information System (INIS)

Green, D.W.; Smith, L.L.; Crain, J.S.; Boparai, A.S.; Kiely, J.T.; Yaeger, J.S. Schilling, J.B.

1995-01-01

The US Department of Energy (DOE) will require a large number of waste characterizations over a multi-year period to accomplish the Department's goals in environmental restoration and waste management. Estimates vary, but two million analyses annually are expected. The waste generated by the analytical procedures used for characterizations is a significant source of new DOE waste. Success in reducing the volume of secondary waste and the costs of handling this waste would significantly decrease the overall cost of this DOE program. Selection of appropriate analytical methods depends on the intended use of the resultant data. It is not always necessary to use a high-powered analytical method, typically at higher cost, to obtain data needed to make decisions about waste management. Indeed, for samples taken from some heterogeneous systems, the meaning of high accuracy becomes clouded if the data generated are intended to measure a property of this system. Among the factors to be considered in selecting the analytical method are the lower limit of detection, accuracy, turnaround time, cost, reproducibility (precision), interferences, and simplicity. Occasionally, there must be tradeoffs among these factors to achieve the multiple goals of a characterization program. The purpose of the work described here is to add waste minimization to the list of characteristics to be considered. In this paper the authors present results of modifying analytical methods for waste characterization to reduce both the cost of analysis and volume of secondary wastes. Although tradeoffs may be required to minimize waste while still generating data of acceptable quality for the decision-making process, they have data demonstrating that wastes can be reduced in some cases without sacrificing accuracy or precision

[Preparation of sedation-analgesia procedures in spanish paediatric emergency departments: A descriptive study].

Science.gov (United States)

Míguez Navarro, Concepción; Oikonomopoulou, Niki; Lorente Romero, Jorge; Vázquez López, Paula

2017-07-24

The objective of this study was to describe the current practice regarding the preparation of the sedation-analgesia (SA) procedures performed in the paediatric emergency centres in Spain. A multicentre, observational and prospective analytical study was carried out on the SA procedures that were performed on children under 18 years-old in 18 paediatric emergency departments between February 2015 and January 2016. A total of 658 SA procedures were registered in 18 hospitals of Spain, most of them to children older than 24 months. The type of the procedure was: simple analgesia in 57 (8.6%), sedation in 44 (6.7%), SA for a not very painful procedure in 275 (41.8%), and SA for a very painful procedure in 282 (42.9%). Informed consent was requested in 98.6% of the cases. The written form was more frequently preferred in the group of patients that received SA for a very painful procedure (76.6%) in comparison to a painful procedure or to simple analgesia (62.9% and 54.4%, respectively, P<.001). The staff that most frequently performed the SA procedures were the paediatricians of the emergency departments (64.3%), followed by Paediatrics Residents (30.7%). The most frequent reasons for the SA were traumatological (35.9%) and surgical (28.4%). Fasting was observed in 81% of the cases. More than two-thirds (67.3%, n=480) children were monitored, the majority (95.8%) of them using pulse oximetry. The pharmacological strategy used was the administration of one drug in 443 (67.3%) of the cases, mostly nitrous oxide, and a combination of drugs in 215 (32.7%), especially midazolam/ketamine (46.9%). The majority of the SA procedures analysed in this study have been carried out correctly and prepared in accordance with the current guidelines. Copyright © 2017. Publicado por Elsevier España, S.L.U.

Quantitative high throughput analytics to support polysaccharide production process development.

Science.gov (United States)

Noyes, Aaron; Godavarti, Ranga; Titchener-Hooker, Nigel; Coffman, Jonathan; Mukhopadhyay, Tarit

2014-05-19

The rapid development of purification processes for polysaccharide vaccines is constrained by a lack of analytical tools current technologies for the measurement of polysaccharide recovery and process-related impurity clearance are complex, time-consuming, and generally not amenable to high throughput process development (HTPD). HTPD is envisioned to be central to the improvement of existing polysaccharide manufacturing processes through the identification of critical process parameters that potentially impact the quality attributes of the vaccine and to the development of de novo processes for clinical candidates, across the spectrum of downstream processing. The availability of a fast and automated analytics platform will expand the scope, robustness, and evolution of Design of Experiment (DOE) studies. This paper details recent advances in improving the speed, throughput, and success of in-process analytics at the micro-scale. Two methods, based on modifications of existing procedures, are described for the rapid measurement of polysaccharide titre in microplates without the need for heating steps. A simplification of a commercial endotoxin assay is also described that features a single measurement at room temperature. These assays, along with existing assays for protein and nucleic acids are qualified for deployment in the high throughput screening of polysaccharide feedstreams. Assay accuracy, precision, robustness, interference, and ease of use are assessed and described. In combination, these assays are capable of measuring the product concentration and impurity profile of a microplate of 96 samples in less than one day. This body of work relies on the evaluation of a combination of commercially available and clinically relevant polysaccharides to ensure maximum versatility and reactivity of the final assay suite. Together, these advancements reduce overall process time by up to 30-fold and significantly reduce sample volume over current practices. The

Rationalities in Trade Union Practices: A Discourse Analytic Perspective on The Strategies of Three Danish Trade Unions for Professionals

Directory of Open Access Journals (Sweden)

Anders Buch

2015-01-01

Full Text Available The ambition of this paper is to analyze the discursive practices of three Danish trade unions for professional and managerial staff as found in their strategy and position papers. Using discourse analytic methods, the paper analyzes, discusses, and compares the strategy papers of the three unions in order to investigate how they problematize their roles and objectives. This investigation clarifies the discursive premises of the unions and it shows how these premises restrain and afford their agendas. The overall purpose of the paper is to investigate and describe the dominant logics and rationalities that shape the documents and to point to their limits and bounds. Through an archaeological investigation, the paper critically examines the implicit and tacit naturalizations made in the documents and reveals the ideological presuppositions of the discursive practices of the authors. The paper documents how “strategic management” has become an integral part of Danish trade unions practices and the paper sets out to discuss this trend in relation to the general neo-liberal decentering of the “social” and promotion of “community” as the locus of governance. Through examples from the practices of the Danish trade unions for professionals, the paper substantiates how new technologies of governance and the subjectification of union members as “customers” tend to transform the role of the trade unions from the position of “political actors” to “service providers” in the advanced liberal societies.

Green Chemistry Metrics with Special Reference to Green Analytical Chemistry

Directory of Open Access Journals (Sweden)

Marek Tobiszewski

2015-06-01

Full Text Available The concept of green chemistry is widely recognized in chemical laboratories. To properly measure an environmental impact of chemical processes, dedicated assessment tools are required. This paper summarizes the current state of knowledge in the field of development of green chemistry and green analytical chemistry metrics. The diverse methods used for evaluation of the greenness of organic synthesis, such as eco-footprint, E-Factor, EATOS, and Eco-Scale are described. Both the well-established and recently developed green analytical chemistry metrics, including NEMI labeling and analytical Eco-scale, are presented. Additionally, this paper focuses on the possibility of the use of multivariate statistics in evaluation of environmental impact of analytical procedures. All the above metrics are compared and discussed in terms of their advantages and disadvantages. The current needs and future perspectives in green chemistry metrics are also discussed.

Green Chemistry Metrics with Special Reference to Green Analytical Chemistry.

Science.gov (United States)

Tobiszewski, Marek; Marć, Mariusz; Gałuszka, Agnieszka; Namieśnik, Jacek

2015-06-12

The concept of green chemistry is widely recognized in chemical laboratories. To properly measure an environmental impact of chemical processes, dedicated assessment tools are required. This paper summarizes the current state of knowledge in the field of development of green chemistry and green analytical chemistry metrics. The diverse methods used for evaluation of the greenness of organic synthesis, such as eco-footprint, E-Factor, EATOS, and Eco-Scale are described. Both the well-established and recently developed green analytical chemistry metrics, including NEMI labeling and analytical Eco-scale, are presented. Additionally, this paper focuses on the possibility of the use of multivariate statistics in evaluation of environmental impact of analytical procedures. All the above metrics are compared and discussed in terms of their advantages and disadvantages. The current needs and future perspectives in green chemistry metrics are also discussed.

Analytical procedures for bulk frozen-hydrated biological tissues

International Nuclear Information System (INIS)

Echlin, P.; Hayes, T.L.; McKoon, M.

1983-01-01

The main advantage of using solid frozen samples for elemental x-ray microanalysis is the ease with which they may be prepared and maintained in the frozen-hydrated state. Within the limits imposed by the reduced spatial resolution of the method, the morphological identification of the tissue components is comparatively easy. Bearing in mind these limitations, the authors have carried out an analysis for several elements in the developing root tips of Lemna minor L (Duckweed). Fresh root tips of Lemna minor L, briefly encapsulated in a polymeric cryoprotectant, are quench frozen in melting nitrogen at ca. 70 0 K and transferred to the pre-cooled cold stage of an AMray Biochamber. The analysis was carried out by means of a Kevex energy-dispersive detector by use of the peak-to-background ratio method. These procedures allow the authors to obtain flat fracture faces in which they have been able to measure the relative concentrations of various elements at the various stages of differentiation in the root tissue

Public regulation of site selection for nuclear power plants. Present procedures and reform proposals: an annotated bibliography

International Nuclear Information System (INIS)

Klema, E.D.; West, R.L.

1977-01-01

Part I of this bibliography contains literature which describes the process of power-plant siting as conducted by the utilities, siting procedures at the point of initiative, analytical tools employed or proposed for site assessment by enterprises in the industry, and the wide range of considerations which the utilities take into account in making site assessments. Part II contains studies and reports on the structure and process of public regulation of power plant siting: the licensing of nuclear facilities by the NRC under terms of the special Government powers in the field of nuclear energy that have evolved since World War II; the steady expansion of regulatory objectives bearing on site approval for nuclear power plants; local government, State, and other Federal agency regulation of siting; survey siting procedures in other countries; the role of regulatory delay in the long lead-time required for construction and operation of nuclear plants. Part III incudes citations on regulatory structure and practice that are unresponsive to the public interest; regulatory decision making's insufficient accessible to public scrutiny and participation; and regulatory procedures that encourage and protect inefficient practices of the regulated industries. Some legal decisions and case studies are included. Part IV, Reform Proposals, includes citations on regulatory reform and reform of siting regulations. Abstracts are provided with 157 of the citations with many more papers cited by title, author, and accession data

Competing on analytics.

Science.gov (United States)

Davenport, Thomas H

2006-01-01

We all know the power of the killer app. It's not just a support tool; it's a strategic weapon. Companies questing for killer apps generally focus all their firepower on the one area that promises to create the greatest competitive advantage. But a new breed of organization has upped the stakes: Amazon, Harrah's, Capital One, and the Boston Red Sox have all dominated their fields by deploying industrial-strength analytics across a wide variety of activities. At a time when firms in many industries offer similar products and use comparable technologies, business processes are among the few remaining points of differentiation--and analytics competitors wring every last drop of value from those processes. Employees hired for their expertise with numbers or trained to recognize their importance are armed with the best evidence and the best quantitative tools. As a result, they make the best decisions. In companies that compete on analytics, senior executives make it clear--from the top down--that analytics is central to strategy. Such organizations launch multiple initiatives involving complex data and statistical analysis, and quantitative activity is managed atthe enterprise (not departmental) level. In this article, professor Thomas H. Davenport lays out the characteristics and practices of these statistical masters and describes some of the very substantial changes other companies must undergo in order to compete on quantitative turf. As one would expect, the transformation requires a significant investment in technology, the accumulation of massive stores of data, and the formulation of company-wide strategies for managing the data. But, at least as important, it also requires executives' vocal, unswerving commitment and willingness to change the way employees think, work, and are treated.

Enabling Analytics on Sensitive Medical Data with Secure Multi-Party Computation.

Science.gov (United States)

Veeningen, Meilof; Chatterjea, Supriyo; Horváth, Anna Zsófia; Spindler, Gerald; Boersma, Eric; van der Spek, Peter; van der Galiën, Onno; Gutteling, Job; Kraaij, Wessel; Veugen, Thijs

2018-01-01

While there is a clear need to apply data analytics in the healthcare sector, this is often difficult because it requires combining sensitive data from multiple data sources. In this paper, we show how the cryptographic technique of secure multi-party computation can enable such data analytics by performing analytics without the need to share the underlying data. We discuss the issue of compliance to European privacy legislation; report on three pilots bringing these techniques closer to practice; and discuss the main challenges ahead to make fully privacy-preserving data analytics in the medical sector commonplace.

40 CFR 136.6 - Method modifications and analytical requirements.

Science.gov (United States)

2010-07-01

... modifications and analytical requirements. (a) Definitions of terms used in this section. (1) Analyst means the..., oil and grease, total suspended solids, total phenolics, turbidity, chemical oxygen demand, and.... Except as set forth in paragraph (b)(3) of this section, an analyst may modify an approved test procedure...

3D-MICE: integration of cross-sectional and longitudinal imputation for multi-analyte longitudinal clinical data.

Science.gov (United States)

Luo, Yuan; Szolovits, Peter; Dighe, Anand S; Baron, Jason M

2018-06-01

A key challenge in clinical data mining is that most clinical datasets contain missing data. Since many commonly used machine learning algorithms require complete datasets (no missing data), clinical analytic approaches often entail an imputation procedure to "fill in" missing data. However, although most clinical datasets contain a temporal component, most commonly used imputation methods do not adequately accommodate longitudinal time-based data. We sought to develop a new imputation algorithm, 3-dimensional multiple imputation with chained equations (3D-MICE), that can perform accurate imputation of missing clinical time series data. We extracted clinical laboratory test results for 13 commonly measured analytes (clinical laboratory tests). We imputed missing test results for the 13 analytes using 3 imputation methods: multiple imputation with chained equations (MICE), Gaussian process (GP), and 3D-MICE. 3D-MICE utilizes both MICE and GP imputation to integrate cross-sectional and longitudinal information. To evaluate imputation method performance, we randomly masked selected test results and imputed these masked results alongside results missing from our original data. We compared predicted results to measured results for masked data points. 3D-MICE performed significantly better than MICE and GP-based imputation in a composite of all 13 analytes, predicting missing results with a normalized root-mean-square error of 0.342, compared to 0.373 for MICE alone and 0.358 for GP alone. 3D-MICE offers a novel and practical approach to imputing clinical laboratory time series data. 3D-MICE may provide an additional tool for use as a foundation in clinical predictive analytics and intelligent clinical decision support.

Procedures for the selection of stopping power ratios for electron beams: Comparison of IAEA TRS procedures and of DIN procedures with Monte Carlo results

International Nuclear Information System (INIS)

Roos, M.; Christ, G.

2000-01-01

In the International Code of Practice IAEA TRS-381 the stopping power ratios water/air are selected according to the half-value depth and the depth of measurement. In the German Standard DIN 6800-2 a different procedure is recommended, which, in addition, takes the practical electron range into account; the stopping power data for monoenergetic beams from IAEA TRS-381 are used. Both procedures are compared with recent Monte Carlo calculations carried out for various beams of clinical accelerators. It is found that the DIN procedure shows a slightly better agreement. In addition, the stopping power ratios in IAEA TRS-381 are compared with those in DIN 6800-2 for the reference conditions of the beams from the PTB linac; the maximum deviation is not larger than 0.6%. (author)

Comparison of different cleanup procedures for oil crops based on the development of a trace analytical method for the determination of pyraclostrobin and epoxiconazole.

Science.gov (United States)

Pan, Xinglu; Dong, Fengshou; Xu, Jun; Liu, Xingang; Cheng, Youpu; Chen, Zenglong; Liu, Na; Chen, Xixi; Tao, Yan; Zheng, Yongquan

2014-12-01

The effects of different cleanup procedures in removing high-molecular-mass lipids and natural colorants from oil-crop extracts, including dispersive solid-phase extraction, low-temperature precipitation and gel permeation chromatography, were studied. The pigment removal, lipid quantity, and matrix effects of the three cleanup methods were evaluated. Results indicated that the gel permeation chromatography method is the most effective way to compare the dispersive solid-phase extraction and low-temperature precipitation. Pyraclostrobin and epoxiconazole applied extensively in oil-crop production were selected as typical pesticides to study and a trace analytical method was developed by gel permeation chromatography and ultra high performance liquid chromatography with tandem mass spectrometry. Average recoveries of the target pesticides at three levels (10, 50, and 100 μg/kg) were in the range of 74.7-96.8% with relative standard deviation values below 9.2%. The limits of detection did not exceed 0.46 μg/kg, whereas the limits of quantification were below 1.54 μg/kg and much lower than maximum residue limit in all matrices. This study may provide the essential data for optimizing the analytical method of pesticides in oil-crop samples. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Analytical Propagation of Uncertainty in Life Cycle Assessment Using Matrix Formulation

DEFF Research Database (Denmark)

Imbeault-Tétreault, Hugues; Jolliet, Olivier; Deschênes, Louise

2013-01-01

with Monte Carlo results. The sensitivity and contribution of input parameters to output uncertainty were also analytically calculated. This article outlines an uncertainty analysis of the comparison between two case study scenarios. We conclude that the analytical method provides a good approximation...... on uncertainty calculation. This article shows the importance of the analytical method in uncertainty calculation, which could lead to a more complete uncertainty analysis in LCA practice....... uncertainty assessment is not a regular step in LCA. An analytical approach based on Taylor series expansion constitutes an effective means to overcome the drawbacks of the Monte Carlo method. This project aimed to test the approach on a real case study, and the resulting analytical uncertainty was compared...

Learning Analytics for Communities of Inquiry

Science.gov (United States)

Kovanovic, Vitomir; Gaševic, Dragan; Hatala, Marek

2014-01-01

This paper describes doctoral research that focuses on the development of a learning analytics framework for inquiry-based digital learning. Building on the Community of Inquiry model (CoI)--a foundation commonly used in the research and practice of digital learning and teaching--this research builds on the existing body of knowledge in two…

16 CFR 1027.8 - Procedures for salary offset.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Procedures for salary offset. 1027.8 Section 1027.8 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION GENERAL SALARY OFFSET § 1027.8 Procedures for salary offset. (a) Deductions to liquidate an employee's debt will be by the method and in the...

Accelerating SPARQL Queries and Analytics on RDF Data

KAUST Repository

Al-Harbi, Razen

2016-11-09

The complexity of SPARQL queries and RDF applications poses great challenges on distributed RDF management systems. SPARQL workloads are dynamic and con- sist of queries with variable complexities. Hence, systems that use static partitioning su↵er from communication overhead for workloads that generate excessive communi- cation. Concurrently, RDF applications are becoming more sophisticated, mandating analytical operations that extend beyond SPARQL queries. Being primarily designed and optimized to execute SPARQL queries, which lack procedural capabilities, exist- ing systems are not suitable for rich RDF analytics. This dissertation tackles the problem of accelerating SPARQL queries and RDF analytics on distributed shared-nothing RDF systems. First, a distributed RDF en- gine, coined AdPart, is introduced. AdPart uses lightweight hash partitioning for sharding triples using their subject values; rendering its startup overhead very low. The locality-aware query optimizer of AdPart takes full advantage of the partition- ing to (i) support the fully parallel processing of join patterns on subjects and (ii) minimize data communication for general queries by applying hash distribution of intermediate results instead of broadcasting, wherever possible. By exploiting hash- based locality, AdPart achieves better or comparable performance to systems that employ sophisticated partitioning schemes. To cope with workloads dynamism, AdPart is extended to dynamically adapt to workload changes. AdPart monitors the data access patterns and dynamically redis- tributes and replicates the instances of the most frequent patterns among workers.Consequently, the communication cost for future queries is drastically reduced or even eliminated. Experiments with synthetic and real data verify that AdPart starts faster than all existing systems and gracefully adapts to the query load. Finally, to support and accelerate rich RDF analytical tasks, a vertex-centric RDF analytics framework is

Analysis of Pre-Analytic Factors Affecting the Success of Clinical Next-Generation Sequencing of Solid Organ Malignancies

International Nuclear Information System (INIS)

Chen, Hui; Luthra, Rajyalakshmi; Goswami, Rashmi S.; Singh, Rajesh R.; Roy-Chowdhuri, Sinchita

2015-01-01

Application of next-generation sequencing (NGS) technology to routine clinical practice has enabled characterization of personalized cancer genomes to identify patients likely to have a response to targeted therapy. The proper selection of tumor sample for downstream NGS based mutational analysis is critical to generate accurate results and to guide therapeutic intervention. However, multiple pre-analytic factors come into play in determining the success of NGS testing. In this review, we discuss pre-analytic requirements for AmpliSeq PCR-based sequencing using Ion Torrent Personal Genome Machine (PGM) (Life Technologies), a NGS sequencing platform that is often used by clinical laboratories for sequencing solid tumors because of its low input DNA requirement from formalin fixed and paraffin embedded tissue. The success of NGS mutational analysis is affected not only by the input DNA quantity but also by several other factors, including the specimen type, the DNA quality, and the tumor cellularity. Here, we review tissue requirements for solid tumor NGS based mutational analysis, including procedure types, tissue types, tumor volume and fraction, decalcification, and treatment effects

Analysis of Pre-Analytic Factors Affecting the Success of Clinical Next-Generation Sequencing of Solid Organ Malignancies

Energy Technology Data Exchange (ETDEWEB)

Chen, Hui [Department of Pathology, The University of Texas MD Anderson Cancer Center, 1515 Holcombe Blvd, Houston, TX 77030 (United States); Luthra, Rajyalakshmi, E-mail: rluthra@mdanderson.org; Goswami, Rashmi S.; Singh, Rajesh R. [Department of Hematopathology, The University of Texas MD Anderson Cancer Center, 1515 Holcombe Blvd, Houston, TX 77030 (United States); Roy-Chowdhuri, Sinchita [Department of Pathology, The University of Texas MD Anderson Cancer Center, 1515 Holcombe Blvd, Houston, TX 77030 (United States)

2015-08-28

Application of next-generation sequencing (NGS) technology to routine clinical practice has enabled characterization of personalized cancer genomes to identify patients likely to have a response to targeted therapy. The proper selection of tumor sample for downstream NGS based mutational analysis is critical to generate accurate results and to guide therapeutic intervention. However, multiple pre-analytic factors come into play in determining the success of NGS testing. In this review, we discuss pre-analytic requirements for AmpliSeq PCR-based sequencing using Ion Torrent Personal Genome Machine (PGM) (Life Technologies), a NGS sequencing platform that is often used by clinical laboratories for sequencing solid tumors because of its low input DNA requirement from formalin fixed and paraffin embedded tissue. The success of NGS mutational analysis is affected not only by the input DNA quantity but also by several other factors, including the specimen type, the DNA quality, and the tumor cellularity. Here, we review tissue requirements for solid tumor NGS based mutational analysis, including procedure types, tissue types, tumor volume and fraction, decalcification, and treatment effects.

Analysis of Pre-Analytic Factors Affecting the Success of Clinical Next-Generation Sequencing of Solid Organ Malignancies

Directory of Open Access Journals (Sweden)

Hui Chen

2015-08-01

Full Text Available Application of next-generation sequencing (NGS technology to routine clinical practice has enabled characterization of personalized cancer genomes to identify patients likely to have a response to targeted therapy. The proper selection of tumor sample for downstream NGS based mutational analysis is critical to generate accurate results and to guide therapeutic intervention. However, multiple pre-analytic factors come into play in determining the success of NGS testing. In this review, we discuss pre-analytic requirements for AmpliSeq PCR-based sequencing using Ion Torrent Personal Genome Machine (PGM (Life Technologies, a NGS sequencing platform that is often used by clinical laboratories for sequencing solid tumors because of its low input DNA requirement from formalin fixed and paraffin embedded tissue. The success of NGS mutational analysis is affected not only by the input DNA quantity but also by several other factors, including the specimen type, the DNA quality, and the tumor cellularity. Here, we review tissue requirements for solid tumor NGS based mutational analysis, including procedure types, tissue types, tumor volume and fraction, decalcification, and treatment effects.

United States Nuclear Regulatory Commission staff practice and procedure digest. Commission, Appearl Board and Licensing Board decisions, July 1972-June 1985. Digest No. 4

International Nuclear Information System (INIS)

1986-01-01

This edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period July 1, 1972 to June 30, 1985 interpreting the NRC's Rules of Practice in 10 CFR Part 2. This edition replaces earlier editions and supplements and includes appropriate changes reflecting the amendment to the Rules of Practice effective June 30, 1985

Analytical solution for pulsatile viscous flow in a straight elliptic annulus and application to the motion of the cerebrospinal fluid

Science.gov (United States)

Gupta, Sumeet; Poulikakos, Dimos; Kurtcuoglu, Vartan

2008-09-01

We present here the analytical solution of transient, laminar, viscous flow of an incompressible, Newtonian fluid driven by a harmonically oscillating pressure gradient in a straight elliptic annulus. The analytical formulation is based on the exact solution of the governing fluid flow equations known as Navier-Stokes equations. We validate the analytical solution using a finite-volume computational fluid dynamics approach. As the analytical solution includes Mathieu and modified Mathieu functions, we also present a stepwise procedure for their evaluation for large complex arguments typically associated with viscous flows. We further outline the procedure for evaluating the associated Fourier coefficients and their eigenvalues. We finally apply the analytical solution to investigate the cerebrospinal fluid flow in the human spinal cavity, which features a shape similar to an elliptic annulus.

International definition of a point-of-care test in family practice: a modified e-Delphi procedure.

Science.gov (United States)

Schols, Angel M R; Dinant, Geert-Jan; Hopstaken, Rogier; Price, Christopher P; Kusters, Ron; Cals, Jochen W L

2018-01-29

The use of point-of-care tests (POCTs) in family practice is increasing, and the term POCT is often used in medical literature and clinical practice. Yet, no widely supported definition by several professional fields exists. To reach consensus on an international definition of a POCT in family practice. We performed a modified international e-Delphi procedure of four rounds among expert panel members from different professional backgrounds-family practitioners, laboratory specialists, policymakers, researchers and manufacturers. Of 27 panel members from seven different countries, 26 participated in all rounds. Most panel members were active in POCT research or policymaking and 70% worked in family medicine. After choosing important components, structuring of answers and feedback, the following definition was chosen as the best or second best definition by 81% of panel members: a point-of-care test in family practice is a test to support clinical decision making, which is performed by a qualified member of the practice staff nearby the patient and on any part of the patient's body or its derivatives, during or very close to the time of consultation, to help the patient and physician to decide upon the best suited approach, and of which the results should be known at the time of the clinical decision making. The definition emerging from this study can inform family practitioners, laboratory specialists, policymakers and manufacturers on the most widely supported and recognized definition and could act as a clear starting point for the organization and execution of professional point-of-care testing in family practice worldwide. © The Author(s) 2018. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Evaluation and prioritization of rice production practices and constraints under temperate climatic conditions using Fuzzy Analytical Hierarchy Process (FAHP)

International Nuclear Information System (INIS)

Mir, S.A.; Padma, T.

2016-01-01

Due to overwhelming complex and vague nature of interactions between multiple factors describing agriculture, Multi-Criteria Decision Making (MCDM) methods are widely used from farm to fork to facilitate systematic and transparent decision support, figure out multiple decision outcomes and equip decision maker with confident decision choices in order to choose best alternative. This research proposes a Fuzzy Analytical Hierarchy Process (FAHP) based decision support to evaluate and prioritize important factors of rice production practices and constraints under temperate climatic conditions and provides estimate of weightings, which measure relative importance of critical factors of the crop under biotic, abiotic, socio-economic and technological settings. The results envisage that flood, drought, water logging, late sali, temperature and rainfall are important constraints. However, regulating transplantation time; maintaining planting density; providing training to the educated farmers; introducing high productive varieties like Shalimar Rice-1 and Jhelum; better management of nutrients, weeds and diseases are most important opportunities to enhance rice production in the region. Therefore, the proposed system supplements farmers with precise decision information about important rice production practices, opportunities and constraints.

Evaluation and prioritization of rice production practices and constraints under temperate climatic conditions using Fuzzy Analytical Hierarchy Process (FAHP

Directory of Open Access Journals (Sweden)

Shabir A. Mir

2016-12-01

Full Text Available Due to overwhelming complex and vague nature of interactions between multiple factors describing agriculture, Multi-Criteria Decision Making (MCDM methods are widely used from farm to fork to facilitate systematic and transparent decision support, figure out multiple decision outcomes and equip decision maker with confident decision choices in order to choose best alternative. This research proposes a Fuzzy Analytical Hierarchy Process (FAHP based decision support to evaluate and prioritize important factors of rice production practices and constraints under temperate climatic conditions and provides estimate of weightings, which measure relative importance of critical factors of the crop under biotic, abiotic, socio-economic and technological settings. The results envisage that flood, drought, water logging, late sali, temperature and rainfall are important constraints. However, regulating transplantation time; maintaining planting density; providing training to the educated farmers; introducing high productive varieties like Shalimar Rice-1 and Jhelum; better management of nutrients, weeds and diseases are most important opportunities to enhance rice production in the region. Therefore, the proposed system supplements farmers with precise decision information about important rice production practices, opportunities and constraints.

Evaluation and prioritization of rice production practices and constraints under temperate climatic conditions using Fuzzy Analytical Hierarchy Process (FAHP)

Energy Technology Data Exchange (ETDEWEB)

Mir, S.A.; Padma, T.

2016-07-01

Due to overwhelming complex and vague nature of interactions between multiple factors describing agriculture, Multi-Criteria Decision Making (MCDM) methods are widely used from farm to fork to facilitate systematic and transparent decision support, figure out multiple decision outcomes and equip decision maker with confident decision choices in order to choose best alternative. This research proposes a Fuzzy Analytical Hierarchy Process (FAHP) based decision support to evaluate and prioritize important factors of rice production practices and constraints under temperate climatic conditions and provides estimate of weightings, which measure relative importance of critical factors of the crop under biotic, abiotic, socio-economic and technological settings. The results envisage that flood, drought, water logging, late sali, temperature and rainfall are important constraints. However, regulating transplantation time; maintaining planting density; providing training to the educated farmers; introducing high productive varieties like Shalimar Rice-1 and Jhelum; better management of nutrients, weeds and diseases are most important opportunities to enhance rice production in the region. Therefore, the proposed system supplements farmers with precise decision information about important rice production practices, opportunities and constraints.

Determining passive cooling limits in CPV using an analytical thermal model

Science.gov (United States)

Gualdi, Federico; Arenas, Osvaldo; Vossier, Alexis; Dollet, Alain; Aimez, Vincent; Arès, Richard

2013-09-01

We propose an original thermal analytical model aiming to predict the practical limits of passive cooling systems for high concentration photovoltaic modules. The analytical model is described and validated by comparison with a commercial 3D finite element model. The limiting performances of flat plate cooling systems in natural convection are then derived and discussed.

Analytical methods for heat transfer and fluid flow problems

CERN Document Server

Weigand, Bernhard

2015-01-01

This book describes useful analytical methods by applying them to real-world problems rather than solving the usual over-simplified classroom problems. The book demonstrates the applicability of analytical methods even for complex problems and guides the reader to a more intuitive understanding of approaches and solutions. Although the solution of Partial Differential Equations by numerical methods is the standard practice in industries, analytical methods are still important for the critical assessment of results derived from advanced computer simulations and the improvement of the underlying numerical techniques. Literature devoted to analytical methods, however, often focuses on theoretical and mathematical aspects and is therefore useless to most engineers. Analytical Methods for Heat Transfer and Fluid Flow Problems addresses engineers and engineering students. The second edition has been updated, the chapters on non-linear problems and on axial heat conduction problems were extended. And worked out exam...

The economics of plastic surgery practices: trends in income, procedure mix, and volume.

Science.gov (United States)

Krieger, Lloyd M; Lee, Gordon K

2004-07-01

Anecdotally, plastic surgeons have complained of working harder for the same or less income in recent years. They also complain of falling fees for reconstructive surgery and increasing competition for cosmetic surgery. This study examined these notions using the best available data. To gain a better understanding of the current plastic surgery market, plastic surgeon incomes, fees, volume, and relative mix of cosmetic and reconstructive surgery were analyzed between the years 1992 and 2002. To gain a broader perspective, plastic surgeon income trends were then compared with those of other medical specialties and of nonmedical professions. The data show that in real dollars, plastic surgeon incomes have remained essentially steady in recent years, despite plastic surgeons increasing their surgery load by an average of 41 percent over the past 10 years. The overall income trend is similar to that of members of other medical specialties and other nonmedical professionals. The average practice percentage of cosmetic surgery was calculated and found to have increased from 27 percent in 1992 to 58 percent in 2002. This most likely can be explained by the findings that real dollar fees collected for cosmetic surgery have decreased very slightly, whereas those for reconstructive procedures have experienced sharp declines. This study demonstrates that plastic surgeons have adjusted their practice profiles in recent years. They have increased their case loads and shifted their practices toward cosmetic surgery, most likely with the goal of maintaining their incomes. The strategy appears to have been successful in the short term. However, with increasing competition and falling prices for cosmetic surgery, it may represent a temporary bulwark for plastic surgeon incomes unless other steps are taken.

On the validity and practical applicability of derivative analyticity relations

International Nuclear Information System (INIS)

Kolar, P.; Fischer, J.

1983-09-01

We examine derivative analyticity relations (DAR), which were originally proposed by Bronzan as an alternative to dispersion relations and in which the dispersion integral is replaced by a tangent series of derivatives. We characterize the class of functions satisfying DAR, and show that outside this class the dispersion integral represents a Borel-like sum of tangent series. We point out difficulties connected with the application of DAR. (author)

The effects of learning analytics empowered technology on the students' arithmetic skills learning

NARCIS (Netherlands)

Knoop-van Campen, C.A.N.; Molenaar, I.; Hasselman, F.W.

2017-01-01

Learning analytics empowered educational technologies (LA-ET) in primary classrooms lead to blended learning scenarios with teacher lead instruction, class paced and individually paced practice. Learning analytics may function as a bridge between class and individual paced activities to support

Fundamentals of analytical chemistry, 5th edition

International Nuclear Information System (INIS)

Skoog, D.A.; West, D.M.; Holler, F.J.

1988-01-01

Fundamentals of Analytical Chemistry is divided into three roughly equal parts. The first 14 chapters cover classical methods of analysis, including titrimetry and gravimetry as well as solution equilibria and statistical analysis. The next 11 chapters address electroanalytical, optical, and chromatographic methods of analysis. The remainder of the text is devoted to discussions of sample manipulation and pretreatment, good laboratory practices, and detailed directions for performing examples of 17 different types of classical and instrumental analyses. Like its predecessors, this fifth edition provides comprehensive coverage of classical analytical methods and the major instrumental ones in a literary style that is clear, straightforward, and readable. New terms are carefully defined as they are introduced, and each term is italicized for emphasis and for ease of relocation by the student who may forget its meaning. The chapters on analyses of real-world samples, on avoiding interferences, and on techniques for sample preparation should prove especially useful for the practicing chemist

The analytical calibration in (bio)imaging/mapping of the metallic elements in biological samples--definitions, nomenclature and strategies: state of the art.

Science.gov (United States)

Jurowski, Kamil; Buszewski, Bogusław; Piekoszewski, Wojciech

2015-01-01

Nowadays, studies related to the distribution of metallic elements in biological samples are one of the most important issues. There are many articles dedicated to specific analytical atomic spectrometry techniques used for mapping/(bio)imaging the metallic elements in various kinds of biological samples. However, in such literature, there is a lack of articles dedicated to reviewing calibration strategies, and their problems, nomenclature, definitions, ways and methods used to obtain quantitative distribution maps. The aim of this article was to characterize the analytical calibration in the (bio)imaging/mapping of the metallic elements in biological samples including (1) nomenclature; (2) definitions, and (3) selected and sophisticated, examples of calibration strategies with analytical calibration procedures applied in the different analytical methods currently used to study an element's distribution in biological samples/materials such as LA ICP-MS, SIMS, EDS, XRF and others. The main emphasis was placed on the procedures and methodology of the analytical calibration strategy. Additionally, the aim of this work is to systematize the nomenclature for the calibration terms: analytical calibration, analytical calibration method, analytical calibration procedure and analytical calibration strategy. The authors also want to popularize the division of calibration methods that are different than those hitherto used. This article is the first work in literature that refers to and emphasizes many different and complex aspects of analytical calibration problems in studies related to (bio)imaging/mapping metallic elements in different kinds of biological samples. Copyright © 2014 Elsevier B.V. All rights reserved.

14 CFR 302.715 - Post-conference procedure.

Science.gov (United States)

2010-01-01

... desirable in the interest of further clarification and understanding of the issues. The granting of an... PROCEEDINGS) PROCEDURAL REGULATIONS RULES OF PRACTICE IN PROCEEDINGS Rules Applicable to Mail Rate Proceedings and Mail Contracts Informal Mail Rate Conference Procedure § 302.715 Post-conference procedure. No...

United States Nuclear Regulatory Staff practice and procedure digest, July 1972-September 1983. No. 3, Supplements 1-5

International Nuclear Information System (INIS)

1985-07-01

This edition of the NRC Staff Practice and Procedure Digest contains a digest of a number of Commission, Atomic Safety and Licensing Appeal Board, and Atomic Safety and Licensing Board decisions issued during the period from July 1, 1972 to September 30, 1983 interpreting the NRC's Rules of Practice in 10 CFR Part 2. This edition replaces earlier editions and supplements and includes appropriate changes reflecting the amendments to the Rules of Practice effective September 30, 1983. The Digest is roughly structured in accordance with the chronological sequence of the nuclear facility licensing process as set forth in Appendix A to 10 CFR Part 2. Those decisions which did not fit into that structure dealt with in a section on ''general matters''. Where appropriate, particular decisions are indexed under more than one heading. Some topical headings contain no decision citations or discussion. It is anticipated that future updates to the Digest will utilize these headings

Procedural Portfolio Planning in Plastic Surgery, Part 1: Strategic Changes in Clinical Practice to Increase Physician Revenue, Improve Operative Throughput, and Maintain Patient Satisfaction.

Science.gov (United States)

Hultman, Charles Scott

2016-06-01

Portfolio planning in health care represents the strategic prioritization of services that permits an organization to better achieve its goals of margin and mission. Because of recent volatility in the economy, declining reimbursement, and rising costs of providing care, such strategic planning has become increasingly important if physicians want to remain leaders in health care. This project assesses the financial impact of procedural portfolio planning on an academic plastic surgery practice from the physician's perspective. We tracked the top 50 procedures, defined as total charges per CPT code, that were performed in our baseline year, for 6 providers in a stable plastic surgery practice. At the end of the first year, we implemented 3 types of strategic changes: growth of areas with high contribution margin (laser resurfacing of burn scars), curtailment of high-risk procedures with negative contribution margin (panniculectomy in smokers), and improved efficiency of mission-critical services with high resource consumption (free-flap breast reconstruction). During the 2-year study period, we had no turnover in faculty, did not pursue any formal marketing, did not change our surgical fees or billing system, provided care independent of payer mix, and maintained our commitment to indigent care. Outcome measures included procedural charges and revenue, collection rates, work relative value units, operating room times, idle times (room time less case time), receipts/minute in operating room, uncompensated charity care, and patient satisfaction (Press-Gainey scores). Before the study period, annual incremental growth in our practice was 1% to 2%, in terms of charges and receipts. After implementation of the portfolio planning project, the financial position of our division improved significantly, with patient satisfaction rates increasing from 85.5% to 94.1% and charity care remaining constant at US $400,000 per year. Encounters, work relative value units, charges

Machine learning and deep analytics for biocomputing: call for better explainability.

Science.gov (United States)

Petkovic, Dragutin; Kobzik, Lester; Re, Christopher

2018-01-01

The goals of this workshop are to discuss challenges in explainability of current Machine Leaning and Deep Analytics (MLDA) used in biocomputing and to start the discussion on ways to improve it. We define explainability in MLDA as easy to use information explaining why and how the MLDA approach made its decisions. We believe that much greater effort is needed to address the issue of MLDA explainability because of: 1) the ever increasing use and dependence on MLDA in biocomputing including the need for increased adoption by non-MLD experts; 2) the diversity, complexity and scale of biocomputing data and MLDA algorithms; 3) the emerging importance of MLDA-based decisions in patient care, in daily research, as well as in the development of new costly medical procedures and drugs. This workshop aims to: a) analyze and challenge the current level of explainability of MLDA methods and practices in biocomputing; b) explore benefits of improvements in this area; and c) provide useful and practical guidance to the biocomputing community on how to address these challenges and how to develop improvements. The workshop format is designed to encourage a lively discussion with panelists to first motivate and understand the problem and then to define next steps and solutions needed to improve MLDA explainability.

A Quantum Dot with Spin-Orbit Interaction--Analytical Solution

Science.gov (United States)

Basu, B.; Roy, B.

2009-01-01

The practical applicability of a semiconductor quantum dot with spin-orbit interaction gives an impetus to study analytical solutions to one- and two-electron quantum dots with or without a magnetic field.

Achieving Cost Reduction Through Data Analytics.

Science.gov (United States)

Rocchio, Betty Jo

2016-10-01

The reimbursement structure of the US health care system is shifting from a volume-based system to a value-based system. Adopting a comprehensive data analytics platform has become important to health care facilities, in part to navigate this shift. Hospitals generate plenty of data, but actionable analytics are necessary to help personnel interpret and apply data to improve practice. Perioperative services is an important revenue-generating department for hospitals, and each perioperative service line requires a tailored approach to be successful in managing outcomes and controlling costs. Perioperative leaders need to prepare to use data analytics to reduce variation in supplies, labor, and overhead. Mercy, based in Chesterfield, Missouri, adopted a perioperative dashboard that helped perioperative leaders collaborate with surgeons and perioperative staff members to organize and analyze health care data, which ultimately resulted in significant cost savings. Copyright © 2016 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Visual Analytics for MOOC Data.

Science.gov (United States)

Qu, Huamin; Chen, Qing

2015-01-01

With the rise of massive open online courses (MOOCs), tens of millions of learners can now enroll in more than 1,000 courses via MOOC platforms such as Coursera and edX. As a result, a huge amount of data has been collected. Compared with traditional education records, the data from MOOCs has much finer granularity and also contains new pieces of information. It is the first time in history that such comprehensive data related to learning behavior has become available for analysis. What roles can visual analytics play in this MOOC movement? The authors survey the current practice and argue that MOOCs provide an opportunity for visualization researchers and that visual analytics systems for MOOCs can benefit a range of end users such as course instructors, education researchers, students, university administrators, and MOOC providers.

Introduction: evaluation in analytic theory and political practice.

Science.gov (United States)

Brown, Lawrence D; Gusmano, Michael K

2013-12-01

The development of professional policy analysis was driven by a desire to apply "science" to policy decisions, but the vision of apolitical policy analysis is as unattainable today as it was at the inception of the field. While there is powerful evidence that schemes to "get around" politics are futile, they never seem to lose their popularity. The contemporary enthusiasm for health technology assessment and comparative-effectiveness research extends these efforts to find technical, bureaucratic fixes to the problem of health care costs. As the benefits and costs of health care continue to grow, so too will the search for analytic evidence and insights. It is important to recognize that the goal of these efforts should not be to eliminate but rather to enrich political deliberations that govern what societies pay for and get from their health care systems.

Any order approximate analytical solution of the nonlinear Volterra's integral equation for accelerator dynamic systems

International Nuclear Information System (INIS)

Liu Chunliang; Xie Xi; Chen Yinbao

1991-01-01

The universal nonlinear dynamic system equation is equivalent to its nonlinear Volterra's integral equation, and any order approximate analytical solution of the nonlinear Volterra's integral equation is obtained by exact analytical method, thus giving another derivation procedure as well as another computation algorithm for the solution of the universal nonlinear dynamic system equation

The Red Book and clinical practice.

Science.gov (United States)

Bygott, Catherine

2012-09-01

Jung's work is fundamentally an experience, not an idea. From this perspective, I attempt to bridge conference, consulting room and living psyche by considering the influence of the 'Red Book' on clinical practice through the subtle and imaginal. Jung's journey as a man broadens out to have relevance for women. His story is individual but its archetypal foundation finds parallel expression in analytic practice today. © 2012, The Society of Analytical Psychology.

Procedure-specific pain management and outcome strategies

DEFF Research Database (Denmark)

Joshi, Girish P; Schug, Stephan A; Kehlet, Henrik

2014-01-01

Optimal dynamic pain relief is a prerequisite for optimizing post-operative recovery and reducing morbidity and convalescence. Procedure-specific pain management initiative aims to overcome the limitations of conventional guidelines and provide health-care professionals with practical recommendat......, optimizing fluid therapy and optimizing post-operative nursing care with early mobilization and oral feeding are utilized....... recommendations formulated in a way that facilitates clinical decision making across all the stages of the perioperative period. The procedure-specific evidence is supplemented with data from other similar surgical procedures and clinical practices to balance benefits and risks of each analgesic technique...

47 CFR 1.88 - Predesignation pleading procedure.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Predesignation pleading procedure. 1.88 Section... Rules of Practice and Procedure Miscellaneous Proceedings § 1.88 Predesignation pleading procedure. In... staff, in its discretion, may in writing, advise such licensee of the general nature of the...