WorldWideScience

Sample records for power plants public

  1. Public attitudes toward nuclear power plant decommissioning

    Lough, W.T.

    1987-01-01

    A public workshop was conducted with a group of citizens to obtain the concerns and preferences of the group with respect to decommissioning. Seventeen concerns about decommissioning were identified and prioritized. The participants were most concerned about the potential health and safety effects from decommissioning. The potential impacts from the lost tax base and loss of employment were also rated highly. The estimated increase in electric utility rates was not a major concern. The participants were split fairly evenly on preferences about the methods of decommissioning. However, nine of the ten participants preferred power plant life extension over decommissioning by any method. Finally, the participants were given an evaluation questionnaire about the workshop. In general, they concluded that the process was effective, and they felt like they were a part of the Commission's planning process

  2. Gas power plants heat the public mind

    Chauveau, L.

    2009-01-01

    Nuclear energy provides most part of the electricity produced in France but fossil thermal plants remain necessary to face peaking demand. The French government has planned to replace all the fossil plants by combined cycle gas plants that release far less CO 2 than classic coal or oil plants. 31 new gas plants have been authorized and among them 2 are operating, 10 are being built and 8 are at the project stage. In some projects like in the little town of Verberie (Oise department) these projects are facing a strong local opposition. The objection of the opponents is two-fold: -) the plant will have a strong negative impact on the wild life particularly the population of boars and stags and -) this huge program of 31 gas plants contradict the government that committed itself to reduce the consumption of fossil energies and to favor renewable energies through its Grenelle environmental policy. (A.C.)

  3. Preparedness of public authorities for emergencies at nuclear power plants

    1982-01-01

    The safety guide lays down the requirements for the establishment of suitable procedures to be followed in the event of an emergency situation at a nuclear power plant. Many of the procedures would also be applicable at other nuclear facilities such as fuel manufacturing plants, irradiated fuel processing plants and the like. The guide defines reponsibilities for emergency planning, organization and action, protective measures to be taken, information and instruction of the public, training and cooperation across boundaries

  4. Location and public acceptance of nuclear power plants in Japan

    Takahashi, Hiroshi

    1978-01-01

    Analysis of problems concerning the sites of nuclear power plants and policy of the government to develop nuclear power plants are presented. At present, national consensus about atomic energy is not yet sufficient in Japan. Accordingly, it is hard to get proper location for nuclear power plants, and more effort is required. Reasons of the hindrance of atomic energy development are not same, but they are based on lack of understanding, social and local situations, and interests accompanying atomic energy development. Also, there is effects from the activities of opposition groups. The most important factor is lack of communication between those concerned with the development and residents around prospective sites. The government has investigated how to promote the atomic energy development, taking into account the present status of public acceptance. The system to promote the development of sites for nuclear power plants has been established. Political efforts for improving the welfare of residents have been made, and three laws for the purpose were approved. According to these laws, subsidiary money is paid to cities, towns and villages where power plants are located. Speeding up and smoothing of legal procedures concerning the location for power plants are also studied. (Kato, T.)

  5. Thermoelectric power plant legislation in Italy: Public participation

    Dell'Anno, P.

    1991-01-01

    Existing Italian legislation describes public involvement in fossil fuel power plant environmental impacts assessments as merely the opportunity to express interest, since it does not acknowledge, in the usual procedural formulas, any actual role to be played by the public. This paper illustrates this point in its examination of the myriad of procedural requirements prescribed by Italian laws governing power plant feasibility analyses. It demonstrates that the recent addition of the environmental element to the standard economic and technological elements in proposal evaluations requires that efforts be made to reduce the complexity of administrative procedures, and that mechanisms be created to allow the public, who will be most affected by any final ruling, a greater say in the decision making

  6. Public hearing process for nuclear power plants. Seminar report

    1979-02-01

    On June 26 and 27, 1978, the Nuclear Regulatory Commission conducted a seminar on the public hearing process for nuclear power plants. The seminar was intended to examine current practices regarding the conduct of public hearings and how these practices related to the statutory intent, to assess whether existing procedures are being followed, and to explore whether administrative or legal changes are warranted. The seminar format allowed exchanges of views among participants in the hearing process and was attended by members of the public, the General Accounting Office, Congressional staffs, NRC, and the nuclear industry. The report contains panel reports on scheduling of public hearings, procedures for Board notification, selection and training of panel members, hearing procedures, and Board functions

  7. Public relations campaign in siting of nuclear power plants in Nigeria

    Angulu, H.A.

    2008-01-01

    Having understood the issues at stake and the need for public support, there is need to create public relations campaign to raise awareness of citing nuclear power plants and stimulate the much needed public support for the introduction of nuclear power into the energy mix. This calls for ally with the Federal Ministry of Information and Communications charged with development of necessary communication strategies for publicizing, educating and informing the people on policies, actions and programmes of Government

  8. Public perception of risks from nuclear power plants in Japan, before the Great East Japan Earthquake

    Murayama, Rumiko; Nakaune, Naoko; Kishikawa, Hiroki; Uchiyama, Iwao

    2011-01-01

    On this research we aim to clarify public perception of risks from nuclear power plants before the Great East Japan Earthquake. The findings of the questionnaire survey conducted in 2010 showed that 1) about 70% of the people felt that they gained benefit from nuclear power plants and these were needed for their daily life. 2) Fifty percent respondents recognized there was danger to themselves and their family members with regards to nuclear power plants. The risks of nuclear power plants to Japanese society ware estimated higher than that risk to individuals of Japanese public. 3) Perception of risks from nuclear power plants to individual Japanese tended to be slightly lower between 1999 and 2010. (author)

  9. Evaluation of fire hazard analyses for nuclear power plants. A publication within the NUSS programme

    1995-01-01

    The present publication has been developed with the help of experts from regulatory, operating and engineering organizations, all with practical experience in the field of fire safety of nuclear power plants. The publication supplements the broad concepts of Safety Series No. 50-SG-D2 (Rev.1), Fire Protection in Nuclear Power Plants, by providing a detailed list of the issues, and some of the limitations, to be considered when evaluating the adequacy and effectiveness of the fire hazard analysis of a nuclear power plant. The publication is intended for assessors of fire hazard analyses, including regulators, independent assessors or plant assessors, and gives a broad description of the methodology to be used by operators in preparing a fire hazard analysis for their own plant. 1 fig

  10. Risk perception of the public living in vicinity of nuclear power plant

    Li Xiaojuan; Hou Changsong; Wang Chunyan; Liu Ying; Sun Quanfu; Yu Ningle; Li Ningning; Zhou Rihui; Zhuang Jiayi

    2008-01-01

    Objective: To investigate the attitude toward and perception of the risk of nuclear power plant among the public residing in vicinity of nuclear power plant, as well as the related factors. Methods: A face-to-face interview on perceived radiation risks was conducted among 1408 individuals in Liangyungang City, Jiangsu Province, where the Tianwan nuclear power plant was under construction. The four groups was defined according to the distance between the residence of the subjects and the Tianwan nuclear power plant: <4 km, 4- 8 km, 8-30 km and 30-50 km. A was used to collect information on education, working history, religion, perception of major industries hazards especially nuclear power plant, and major factors may influence their perceptions. Ordinal logistic regression model was used to analyze the data. Results: About 91.18% of the interviewee heard about the nuclear power plant, 35.36% of them had knowledge about Chernobyl nuclear power plant accident, 71.05% of them believed that the nuclear power plant had no negative effects on environments, 37.03% of them believed that the nuclear energy was safe, 74.27% of them believed that it was necessary for China to develop nuclear energy, 63.29% of them supported the construction of the nuclear power plant in local area. Ordinal logistic regression analysis revealed that the higher education, higher family annual income, male, economic benefits from the nuclear power plant construction, and trust in local government having competency to handling emergencies were positive factors; otherwise, impression on nuclear power plant of bad influences on environment and health were negative factors. An inverted U-shaped with a right tailing relationship between negative attitudes toward nuclear power plant and distance to the plant was found. Conclusions: Education, gender, family annual income and expectation of economic benefit returns were the major factors influencing the perception of and attitudes toward nuclear power

  11. A study of public acceptance of construction of atomic power plant

    Harada, Kazunori; Matsuhashi, Ryuji; Yoshida, Yoshikuni

    2011-01-01

    In June 2010, Basic Energy Plan was approved in a Cabinet meeting. It says that Japan aims to construct more than 14 atomic power plants by 2030. Today, there are 12 plans of construction of atomic power plant, but it is hard to say that their plans easily come off. That's because public acceptance of atomic power plant is low in Japan, for example local residents wage opposition campaigns. This study conducts a survey in the form of a questionnaire and analyzes it by Analytical Hierarchical Process (AHP). Analytic Hierarchy Process is a structured technique for dealing with complex decisions. A questionnaire using AHP is very easy to answer and analyze. This survey was conducted in 2 areas. First area is Hohoku-cho, Yamaguchi Pref. that had a plan of construction of atomic power plant and the plan was demolished by opposition campaigns. Second area is Kaminoseki-cho, Yamaguchi Pref. that has a plan of construction of atomic power plant now and the plan is working order. Public acceptance can be calculated from survey data of 2 areas, and it helps to understand why first area disapproved a plan of atomic power plant and second area approves it. We consider a model to analyze public acceptance. (author)

  12. Periodic safety review of operational nuclear power plants. A publication within the NUSS programme

    1994-01-01

    This Safety Guide which supplements the IAEA Safety Fundamentals: The Safety of Nuclear Installations and the Code on the Safety of Nuclear Power Plants: Operation, forms part of the Agency's programme, referred to as the NUSS programme, for establishing Codes and Guides relating to nuclear power plants. A list of NUSS publications is given at the end of this book. This Guide was drafted on the basis of a systematic review approach that was endorsed by the IAEA Conference on the Safety of Nuclear Power: Strategy for the Future. The purpose of this Safety Guide is to provide guidance on the conduct of Periodic Safety Reviews (PSRs) for an operational nuclear power plant. The Guide is directed at both owners/operators and regulators. This Safety Guide deals with the PSR of an operational nuclear power plant. A PSR is a comprehensive safety review addressing all important aspects of safety, carried out at regular intervals. 22 refs, 4 figs

  13. Analysis on the public acceptance of nuclear power plant and its policies

    Choi, Young Sung

    1994-02-01

    In the current situation of requiring the public acceptance of nuclear power plant, it may be necessary to understand what the public think about this plant and to find out the public preference values for its policies. For this purpose, multi-attribute utility (MAU) model was applied to analyze the public perception pattern for five power production systems. And the conjoint measurement technique was applied to measure quantitative values of public preferences for imaginary policy alternatives. To study the feasibility of these methods, mail survey was conducted to the qualified sample who had the experience of visiting nuclear power plant. Diagnosis of their perception pattern for five power production systems was made by the simplified MAU model. Estimation of the quantitative preference values for potential policy alternatives was made by the conjoint measurement technique, which made it possible to forecast the effectiveness of each option. The results from the qualified sample and the methods used in this study would be helpful to set up new policy of nuclear power plant

  14. Public perspectives on proposed license renewal regulations for nuclear power plants

    Ligon, D.; Hughes, A.; Seth, S.

    1991-01-01

    On 17 July 1990, the U.S Nuclear Regulatory Commission (NRC) issued for public comment its proposed rule for renewing the operating licenses of nuclear power plants (55 FR 29043). This solicitation marked the fourth time that NRC has Invited public comments on its efforts to develop regulatory requirements for re licensing nuclear power plants. Previously, NRC solicited public comments on establishing a policy statement on plant life extension, and on the issues and options for license renewal discussed in NUREG-1317. On 13-14 November 1989, NRC held a public workshop where the NRC staff discussed a conceptual approach to the rule and solicited written comments on the regulatory philosophy, conceptual rule, and on certain questions. NRC is taking into account all comments received in its development of the final rule which is scheduled for issuance in the summer of 1991

  15. Public debate about the EPR nuclear power plant at Flamanville

    2005-01-01

    The project of building of he EPR reactor at Flamanville (Manche, France) has been submitted to the public debate. This document includes a presentation of the project and of the rules of the public debate, a synthesis of the file made by the prime contractor (EDF), a synthesis of the collective book of national actors concerned by the project (a group of associations for environment protection, Areva company, the ministries of economy and ecology, Global Chance, association of pro-nuclear ecologists (AEPN), 'Sortir du Nucleaire' (out-of nuclear) network, group of scientists for the information about nuclear (GSIEN), association for the promotion of the Flamanville site (Proflam), French nuclear energy society (SFEN) in association with 'Sauvons le Climat' (let's save climate), regional collective association 'EPR non merci, ni ailleurs, ni ici' (EPR, no thanks, neither elsewhere, nor here), NegaWatt), and 5 detailed books of actors: ACRO (association for the control of radioactivity in Western France), CFDT and CGT syndicates, the economic and social council of Basse Normandie region, and Proflam. (J.S.)

  16. Potential impacts of nuclear power plant operation on the public

    Kotulan, J.

    1999-01-01

    Findings from the examination of the health status of population living in the vicinity of nuclear facilities abroad (England, France, Germany ...) are summarized. Where a significant increase in the incidence of leukemia in children and non-Hodgkin's lymphomas were observed, these are not attributed to radioactivity; rather, the virus theory seems to account best for this phenomenon. Author's findings in the area of the Dukovany NPP in the Czech Republic (which have been published) are summarized as follows: (i) Total mortality 1986-1994 in the vicinity of the plant is the same as or lower than in reference regions; (ii) This also applies to premature deaths and to the 'lost years' indicator; (iii) Death rate due to tumors is significantly lower than in reference regions; (iv) This also applies to the majority of the individual types of tumors; (v) Leukemia seems to be an exception, its incidence being higher than in reference regions. The absolute figures, however, are low (11 + 17 in the exposed region) and the differences are not statistically significant. This also applies to lymphatic tissue tumors. (7) Mental well-being was no different from the reference region; in some respects, surprisingly enough, it even appeared to be more favourable. (P.A.)

  17. Longer operating times of nuclear power plants. Options for compensating public utility advantages

    Bode, Sven; Kondziella, Hendrik; Bruckner, Thomas

    2010-01-01

    The current German government of CDU/CSU and FDP intends to prolong the operating time of existing nuclear power plants in Germany. The advantages resulting for public utilities are to be compensated. The authors discuss how compensation may be achieved and outline the available instruments. (orig.)

  18. Incentive regulation of nuclear power plants by state Public Utility Commissions

    Martin, R.L.; Olson, J.; Hendrickson, P.

    1989-12-01

    Economic performance incentives established by state Public Utility Commissions (PUCs) currently are applicable to the construction or operation of approximately 73 nuclear power reactors owned by 27 utilities with investment greater than 10% in 18 states. The NRC staff monitors development of the incentives and periodically provides an updated report on all nuclear plant incentives to its headquarters and regional offices. The staff maintains contact with the PUCs and the utilities responsible for implementing the incentives in order to obtain the updated information and to consider potential safety effects of the incentives. This report on incentive regulation of nuclear power plants by state PUCs presents the NRC staff's concerns on potential safety effects of economic performance incentives. It also includes a plant-by-plant survey that describes the mechanics of each incentive and discusses the financial effects of the incentive on the utility-owner(s) of the plant

  19. Incentive regulation of nuclear power plants by state public utility commissions

    Petersen, J.C.

    1987-12-01

    This report on incentive regulation of nuclear power plants by state public utility commissions (PUCs). Economic performance incentives established by state PUCs are applicable to the construction or operation of about 45 nuclear power reactors owned by 30 utilities in 17 states. The NRC staff monitors development of the incentives and periodically provides an updated report on all nuclear plant incentives to its regional offices. The staff maintains contact with the PUCs and the utilities responsible for implementing the incentives in order to obtain the updated information and to consider potential safety effects of the incentives. This report presents the NRC staff's concerns on potential safety effects of economic performance incentives. It also includes a plant-by-plant survey that describes the mechanics of each incentive and discusses the financial effects of the incentive on the utility-owner(s) of the plant

  20. Innovation exploration and practice on communication between publics and nuclear power plant

    Xu Liuhua

    2014-01-01

    It is a fundamental job for nuclear industry's development to realize smooth communication and deep fusion between nuclear energy and the public. Tracing back to Haiyan people's history in contacting with nuclear energy, it is easily found that the local government did quite a few works on public's awareness on nuclear energy safety concern. The local authority tell people the scientific reason and related knowledge by printing and propagating easily-understood pamphlets and pictures, or to explain the nuclear safety by publicizing testing data and related research results. In a word, the local authority used easily-understood ways and reasonable facts to ease the public's over worry about nuclear safety problem. The local authority has set up a mutual interacted communication system with nuclear power plant while focusing on key issues in this important period of nuclear power development. Meanwhile it has set up a weekly report system and appointed news spoksman for nuclear safety concern to public. The nuclear edition volume on the local government's website and micro-blog for nuclear news releasing have been constructed already, to realizing the public transparency. The public has gradually changed their stand from worry to disburden, from nuclear-avoid to nuclear favored, from economy burden to pillar industry. Later, Haiyan county will focus on implementation of public education and deep fused cooperation between local and nuclear power plant, endeavoring to exploit an innovative way on mutual communication for 2 parts in future. (author)

  1. Analysis of policy alternatives on the public acceptance of nuclear power plant in Korea

    Choi, Young-Sung; Lee, Byong-Whi

    1995-01-01

    Public acceptance has become an important factor in nuclear power program particularly after Chernobyl accident and recent rapid democratization in Korea. A method reflecting public opinions in order to improve public acceptance is to find out the public preference values for its policy alternatives. In this study, the conjoint analysis was applied to find out the quantitative values of public preferences for twelve policy alternatives to support communities surrounding nuclear power plants in Korea. To implement the analysis, questionnaires of trade-off matrix form were mailed to the science teachers of middle or high school through-out the country who had the experience of visiting nuclear power plant. The quantitative preference values for potential policy alternatives were estimated, which made it possible to forecast the effectiveness of each option. It was revealed that the improvement of reactor safety 100 times and the establishment of civilian monitoring system for nuclear safety would be two best options to improve public acceptance of nuclear power in Korea. (author)

  2. Environmental aspects and public exposure doses of airborne radioactive effluents from a PWR-power plant

    Song Miaofa; Zhang Jin; Fu Rongchu; Hu Yinxiu

    1989-04-01

    It is estimated that the environmental aspects and public exposure doses of airborne radioactive effluents from a imaginary 0.3 GW PWR-power plant which sited on the site of a large coalfired power plant estimated before. The major contributor to public exposure is found to be the release of 14 C and the critical pathway is food ingestion. A maximum annual individual body effective dose equivalent of 7.112 x 10 -6 Sv · (GW · a) -1 is found at the point of 0.5 km southeast of the source. The collective dose equivalent in the area around the plant within a radius of 100 km is to be 0.5974 man-Sv · a) -1 . Both maximum individual and collective effective dose equivalents of the PWR-power plant are much lower than those of the coal-fired one. If the ash emission ratio of the latter decreases from 24.6% to 1%, public exposure doses of the two plants would be nearly equal

  3. Public opinion on age-related degradation in nuclear power plants

    Matsuda, Toshihiro

    2005-01-01

    The first objective of this study is to shed light on the public opinion on age-related degradation at nuclear power plants, namely, on how the general public recognizes or views age-related degradation, which is a safety-related issue and one of the factors contributing to accidents and failures which occur at nuclear power plants. The second objective is to look into the impacts of the accident at Mihama Unit 3, which was caused by a failure to check on the piping wall thickness, on the public opinion on age-related degradation. The first survey was conducted in August 2003, followed by the second survey in October 2004, two months after the accident. The surveys found that the age-related degradation is being perceived by people as one of the risk factors that affect the safety of nuclear power plants. The characteristics of the citizens' perceptions toward age-related degradation in the form of piping cracks are that: (a) many respondents feel uneasy but a relatively few people consider that nuclear operators are technologically capable of coping with this problem; (b) many people believe that radioactivity may be released; and (c) numerous respondents consider that signs of cracks must be thoroughly detected through inspections, while on the other hand, a large percentage of the respondents attribute the accident to improper inspections/maintenance. Based on these results, the government and nuclear operators are expected to give most illuminating explanation on the current situation of and remedial measures against age-related degradation at nuclear power plants. As for the effects of the Mihama-3 accident on the public opinion on age-related degradation, it was revealed that the accident has not so significantly affected the general view for the safety of nuclear power plants, but has newly or strongly aroused people's consciousness of two of the risk factors - improper inspections/maintenance and the age-related degradation of piping. (author)

  4. Are Public-Private Partnerships an Appropriate Governance Structure for Power Plants? A Transaction Cost Analysis

    Ho, S. Ping; Hsu, Yaowen

    2015-04-01

    In order to meet the requirements of the rapid economic growth, many countries demand an increasing number of power plants to meet the increasing electricity usage. Since high capital requirements of power plants present a big issue for these countries, PPPs have been considered an alternative to provide power plant infrastructure. In particular, in emerging or developing countries, PPPs may be the fastest way to provide the infrastructure needed. However, while PPPs are a promising alternative to providing various types of infrastructure, many failed power plant PPP projects have made it evident that PPPs, under certain situations, can be very costly or even a wrong choice of governance structure. While the higher efficiency due to better pooling of resources is greatly emphasized in Public-Private Partnerships (PPPs), the embedded transaction inefficiencies are often understated or even ignored. Through the lens of Transaction Cost Economics (TCE), this paper aims to answer why and when PPPs may become a costly governance structure for power plants. Specifically, we develop a TCE-based theory of PPPs as a governance structure. This theory suggests that three major opportunism problems embedded in infrastructure PPPs are possible to cause substantial transaction costs and render PPPs a costly governance structure. The three main opportunism problems are principal-principal problem, firm's hold-up problem, and government-led hold-up problem. Moreover, project and institutional characteristics that may lead to opportunism problems are identified. Based on these characteristics, an opportunism-focused transaction cost analysis (OTCA) for PPPs as a governance structure is proposed to supplement the current practice of PPP feasibility analysis. As a part of theory development, a case study of PPP power plants is performed to evaluate the proposed theory and to illustrate how the proposed OTCA can be applied in practice. Policies and administration strategies for power

  5. Nuclear Power Plants. Revised.

    Lyerly, Ray L.; Mitchell, Walter, III

    This publication is one of a series of information booklets for the general public published by the United States Atomic Energy Commission. Among the topics discussed are: Why Use Nuclear Power?; From Atoms to Electricity; Reactor Types; Typical Plant Design Features; The Cost of Nuclear Power; Plants in the United States; Developments in Foreign…

  6. Study on public awareness of utilizing nuclear power in China. Changes in public awareness after the accident of Fukushima Daiichi Nuclear Power Plants

    Xu, Ting; Wakabayashi, Toshio

    2012-01-01

    The purpose of this study is to clarify public awareness of utilizing nuclear power in China and to determine the effects of the accident of Fukushima Daiichi nuclear power plants. Web online surveys were carried out before and after the accident of Fukushima Daiichi nuclear power plants. The online survey before the accident of Fukushima Daiichi nuclear power plants had 4,255 adult respondents consisting of 1,851 males and 2,404 females. The online survey after the accident had 721 respondents consisting of 406 males and 315 females. The two online surveys about the attitude toward nuclear power plants consisted of 37 items, such as the necessity of nuclear power plants, the reliability of safety, and government confidence. As a result, respondents of the online surveys in China consider that nuclear energy is more important than the anxiety of accident. On the other hand, women have sensation of fear for the accident of Fukushima Daiichi nuclear power plants and radiation. (author)

  7. Analysis of public comments on the proposed rule on nuclear power plant license renewal

    1991-12-01

    This report provides a summary and analysis of public comments on the proposed license renewal rule for the nuclear power plants (10 CFR Part 54) published in the Federal Register on 17 July 1990. It also documents the NRC's resolution of the issues raised by the commenters. Comments from 121 organizations and 76 individuals were reviewed and analyzed to identify the issues, including those pertaining to the adequacy of the licensing basis, the performance of an integrated plant assessment, backfit considerations, and need for public hearings. The analysis included grouping of commenters' views according to the issues raised. The public comments analyzed in this report were taken into consideration in the development of the final rule and revisions to the supporting documents

  8. The public opinion on emergency preparedness close to nuclear power plants

    Hultaaker, Oe.

    1984-07-01

    More than 1500 people have been interviewed on their attitudes towards and their knowledge of emergency actions on nuclear accidents at nuclear power plants. Of the people addressed, 768 lived in the inner zones close to the power plants. 775 were farmers near the four nuclear power sites in Sweden. The farmers lived both in inner zones and zones further away. A majority consider themselves not well-informed on health risks after a nuclear accident. More than a third would want more information on what to do in case of accident. Farmers outside the inner zones are more dissatisfied with the information status than other groups. Farmers from the inner zones consider the information given inadequate regarding risks to their health and also health risks for their live stock. The results of interviews are in some cases compared with the information given to the public. (Aa)

  9. Telephone counseling for the public after the Fukushima Daiichi Nuclear Power Plant accident

    Horiguchi, T.; Kojima, K.; Itoh, T.

    2011-01-01

    After the Fukushima Daiichi Nuclear Power Plant accident, Kinki University Atomic Energy Research Institute provided telephone counseling services in order to respond the public's growing concerns about radiation and nuclear energy. Three telephone lines were newly installed for the counseling and the number of consultation marked 705 between March 24 and April 2. In this report, by summarizing the contents of the counseling, we will show what the public concerned about shortly after the accident and report how we responded to the concerns. (author)

  10. Public acceptance of constructing coastal/inland nuclear power plants in post-Fukushima China

    Wu, Yican

    2017-01-01

    Risk perception and public involvement have become more and more important in post-Fukushima accident era. A survey had been carried out about public acceptance of constructing coastal/inland Nuclear Power Plants (NPPs) in China. We examined impact factors of public acceptance of nuclear energy and also carried out a comparison between China and OECD. The study revealed that the public still took relatively optimistic attitude although there was a slight decrease just after Fukushima and the public's confidence recovered four years later. The ratio of inland NPPs opponents reached to quite a high level and “not-in-my-back-yard” still reflected an obvious syndrome. We also found public acceptance is mainly affected by benefit and, to a lesser extent, by knowledge, education and age. Moreover, the study suggested government is still a creditable information resource due to its authority but most of respondents felt little or no well-informed about nuclear safety, which means a significant communication gap exists between government and the public. As China is the most ambitious country to develop nuclear energy, it is proposed to introduce a transparent and open system of third-party evaluation, which mainly consists of scientists and non-profit research institutions, to ensure the healthy and sustainable development of nuclear energy. - Highlights: • The public are more optimistic about nuclear energy in China than in OECD. • The ratio of inland nuclear power plants opponents reaches to quite a high level. • Government is still a creditable information resource due to its authority. • Third-party evaluation is proposed to intervene in nuclear safety supervision.

  11. Hinkley Point 'C' power station public inquiry: proof of evidence on plant parameters

    George, B.V.

    1988-09-01

    A public inquiry has been set up to examine the planning application made by the Central Electricity Generating Board (CEGB) for the construction of a 1200 MW Pressurized Water Reactor power station at Hinkley Point (Hinkley Point ''C'') in the United Kingdom. The overall economics of a nuclear power station depends on many factors which are determined by the design; the effectiveness with which the station is constructed; and the performance of the plant. In this respect the most significant factors are: construction time; capital cost; availability of the plant to produce electricity, taking account of those outages due to either planned or unplanned shutdowns; net electrical power output; and the working life of the plant. In this evidence to the Inquiry, the basis for the values chosen as ''targets'' for these parameters in the design of the plant and the control of the project is set out. The adjustment of the parameters to make them suitable for economic appraisal is explained. The design and project management arrangements are described. (author)

  12. Environmental risk assessment of airborne emission from chinese coal-fired power plants with public health detriment criteria

    He Huimin; Pan Ziqiang; Zhang Yongxing; Xia Yihua

    1997-01-01

    On the basis of investigation of types of dust removers and their efficiency in Chinese coal-fired power plants, human health detriment of airborne non-radioactive and radioactive emissions from the power plants is assessed with public health detriment assessment method. The results show that the risk is primarily from airborne non-radioactive emission

  13. Comparative study of radiological impact of nuclear power plant and coal-fired power plant: estimation of radiation dose to public from nuclear power plant and coal-fired power plant generation

    Umbara, Heru; Yatim, Sofyan

    1998-01-01

    Radiation impact assessment of Nuclear Power Plant and Coal-Fired Power Plant in Muria Penninsula was carried out. The computation of radionuclide releases to the atmosphere subjects to gaussian plume model, on the other hand, the radionuclide transfer model between environmental compartment (pathway) follow concentration factor methods. Both models are compiled in GENII-The Hanford Environmental Radiation Dosimetry Software System, which is used in the assessment. Most of all input data for GENII package are site specific, such as meteorological data, stack flow, stack height, population, local consumption except the transfer factor data are taken from the GENII package. The results show that during operation of NPP the maximal exposed individual received annual effective dose 150 nSv at 300 -700 m from the site toward east otherwise in operation of CPP the maximal exposed individual received annual effective dose 410 nSv in the same distance and direction. Both results of the maximal exposed individual received annual effective dose about 0,003 % and 0,008 % of whole body annual dose limit for members of public for NPP and CPP. (author)

  14. Public perception toward information and knowledge of nuclear power plant development; A Malaysian case study

    Misnon, Fauzan Amin; Rahman, Irman Abd.; Hu, Yeoh Siong; Yasir, Muhamad Samudi

    2018-04-01

    Knowledge has been known as a key element in developing support and perception by the public towards any new policy by the government, including the development of nuclear energy. The success of the policy is mainly dependent on public support which is related to the perception cultivated by the knowledge that is already held by the people. A public survey was conducted between 14 March 2016 to 10 May 2016 focusing on the Malaysian public acceptance and perception towards the implementation of nuclear energy in Malaysia (n=1438). This research was aimed on the research question which is `Does the level of general knowledge and education regarding nuclear energy in Malaysia influence the acceptance and support of the people to develop nuclear technology?'. These finding suggest that open discourse is a must even at the initial stages of developing a Nuclear Power Plant (NPP) program, which will touch on a few points that will assist to society's knowledge and understanding towards nuclear energy from the aspects of management, safety, radioactive waste, impact on economic competitiveness as well as the benefits and risks regarding the development of NPP. By increasing the knowledge regarding nuclear power and radioactive waste, perception towards the pros of NPP as well as the conviction towards its safety can be increased. It is suggested for the parties involved to use the latest approach of information technology as a way to provide the most effective medium of information dissemination to the public.

  15. Development of a public interaction program for fossil fuel power plants

    Coakley, L.G.; Reeder, F.S.

    1991-01-01

    Public and agency intervention in power plant construction projects can have a significant impact on schedule, budget, design and ultimate approvals. Recognition of this early in the project planning stage provides the opportunity to develop a public interaction program designed to the project's particular social environment, and approval requirements. A proactive public interaction program provides a method for early issue identification, and the opportunity for developing positive working relationships with regulatory agencies, potential public opponents, as well as other potentially involved entities. This paper will make extensive use of a number of flow charts and matrices to demonstrate the major steps in developing a Public Interaction Program (PIP). Critical activities include the concise definition of the utility company's objectives relating to a proposed project and whether a PIP will facilitate achievement of those objectives. A quantification matrix is suggested as a means of identifying the publics affected by a proposed project (e.g., property owners, industrial customers, environmental interest groups), evaluating their interest and issues, and matching them with the public interaction technique(s) most likely to be effective. A method will be described which incorporates numerical weights applied to issues and mechanisms which may have positive or negative impacts on successful completion of the project, and scores which reflect the probable significance of each issue to each public entity. The result of such an analysis will enable a project planner to select from a menu of public interaction entrees those most likely to satisfy the public's appetite for information and involvement. Utility companies which have used public interaction have found such programs with higher nutritive value resulting in greater utility credibility, less litigation and regulatory agency delay

  16. Public perception on the benefits and risks of nuclear power plants. A simplified study

    Ribeiro Junior, Joaquim Apparecido

    2007-01-01

    Public acceptance of the nuclear based electricity generation depends on many variables that can be affected by circumstances and interests, which although seemingly not close to the issue, can strongly influence the final outcome. Explicit or consented positions assumed by opinion makers and some segments of society are subject to episodic waves of interaction through the media and they permeate to the public in a process that is very complex to be fully understood. The modeling of such process is a very complicated undertaking, and gives no assurance of practical results concerning to what, how and who, should be given prominence in the interactions with the media and the general public. In this context, the risk communication has assumed a leading role and, as a consequence, most of the interaction with the public has been done with both defensive language and content. This study has tried a simple and practical approach to the problem, in such a way as to gather some interesting subsidies to treat this issue in a different way. The basic assumption is that in a similar way as individuals base their decision to acquire a new good or service on a 'intuitive' cost-benefit judgment, society (as a collection of individuals) also manifest their acceptance (or not) with respect to industrial installations and undertakings by comparing risks and benefits according to their perception. An exploratory survey was carried out in a few high schools, colleges and MBA courses in the state of Sao Paulo, Brazil. A first part was aimed to catch and understand the public perception of: the intrinsic value of the electric energy, the need to universalize the access to electricity, nuclear plants, the acceptance deficit of nuclear power as compared to other sources of energy, the benefits a nuclear plant can bring and who does and who does not deserves credibility to speak about nuclear plants. The second part was addressed to grasp a picture of more relevant distortions concerned

  17. Costs of decommissioning nuclear power plants as reported to the public to date

    Strasma, J.D.

    1982-01-01

    This paper attempts to determine what information has been available to the public, in the United States, concerning the cost of decommissioning nuclear power plants. The search was conducted in the Television News Index and Abstracts, in the annual indexes to The Reader's Digest, and in two computer-based bibliographic retrieval systems, Lockheed's DIALOG Magazine Index and the New York Times Information Bank. Fewer than ten articles appeared in widely read places, with none at all in the Reader's Digest and none on the evening TV news, from 1974 to date. The cost of decommissioning nuclear power plants was reported in various ways, with a wide range of estimates and relatively little actual experience. Costs were given in dollars of different years, in percentages of construction costs, in cost per KWH as per month to the consumer, etc., making the range of reported costs seem even wider than it really was. It is not surprising that the public fears that decommissioning costs will be alarmingly high. The public debate on energy policy might be more rational with better information on decommissioning costs. 16 references

  18. Hydroelectric Power Plants Dobsina

    Majercak, V.; Srenkelova, Z.; Kristak, J.G.

    1997-01-01

    In this brochure the Hydroelectric Power Plants Dobsina, (VED), subsidiary of the utility Slovenske Elektrarne, a.s. (Slovak Electric, plc. Bratislava) are presented. VED is mainly aimed at generating peak-load electrical energy and maintenance of operational equipment. Reaching its goals, company is first of all focused on reliability of production, economy and effectiveness, keeping principles of work safety and industry safety standards and also ecology. VED operates eight hydroelectric power plants, from which PVE Ruzin I and PVE Dobsina I are pump storage ones and they are controlled directly by the Slovak Energy Dispatch Centre located in Zilina thought the system LS 3200. Those power plants participate in secondary regulation of electrical network of Slovakia. They are used to compensate balance in reference to foreign electrical networks and they are put into operation independently from VED. Activity of the branch is focused mainly on support of fulfilment of such an important aim as electric network regulation. Beginnings of the subsidiary Hydroelectric Power Plants Dobsina are related to the year of 1948. After commissioning of the pump storage Hydroelectric Power Plants Dobsina in 1953, the plant started to carry out its mission. Since that time the subsidiary has been enlarged by other seven power plants, through which it is fulfilling its missions nowadays. The characteristics of these hydroelectric power plants (The pump-storage power plant Dobsina, Small hydroelectric power plant Dobsina II, Small hydroelectric power plant Rakovec, Small hydroelectric power plant Svedlar, Hydroelectric power plant Domasa, The pump-storage power plant Ruzin, and Small hydroelectric power plant Krompachy) are described in detail. Employees welfare and public relations are presented

  19. Value of solar thermal and photovoltaic power plants to Arizona Public Service Company

    Smith, P.A.

    1994-01-01

    Arizona Public Service Company has performed a study using historical solar radiation and system load data to (1) estimate the effects of six types of solar generation on system reliability, (2) estimate the central station value of each to its system, (3) and to assess the potential of each of those technologies to provide bulk power to its system in the 2000 time frame. Technologies included three solar thermal (central receiver, dish Stirling, and parabolic trough) and three flat plate photovoltaic plants (fixed position, one axis, and two axis tracking)

  20. Hydroelectric power plant project on the Coulonge River: Report of inquiry and public hearing

    1992-01-01

    A hydroelectric power plant is proposed for the Coulonge River, a tributary of the Ottawa River in Quebec. Water would be taken from the river through a 609 m tunnel to the plant, which would contain two Francis turbines with a total installed power of 16.2 MW operating under a net head of 43 m and a water flow rate of 21.5 m 3 /s. Other works would be necessary upstream for controlling flow and protecting the intake. Total cost for the two-year construction project is estimated at $28 million and annual revenues are forecast at $6 million. An inquiry and public hearing were held to consider the biophysical, social, economic, and cultural impacts of the proposed hydroelectric project. Results of the hearing are summarized in such areas as legal aspects, environmental quality, water rights, land use, job creation, effects on tourism and recreation, effects on wildlife, water level fluctuations, water quality, and safety. The economic justification for the project is discussed with reference to electricity demand, economic viability, utilization factors, and policies that favor construction of small-scale hydroelectric plants. The project was not found to bring sufficient benefits to the region in which it was to be situated and would not be authorized unless Hydro-Quebec tariff policy with respect to small hydro plants was modified and unless the project sponsor compensates the regional municipality. 13 refs., 11 figs., 4 tabs

  1. Radioecological impact around the nuclear power plant - general public perception and facts

    Karunakara, N.

    2014-01-01

    Nuclear science and technology have contributed immensely to the overall societal developmental. Today, nuclear applications can be found in almost every social and economical sector, and in virtually every corner of the globe. Radiation and radioisotopes find wide applications in the fields of agriculture, food preservation, health care, industry, water management, etc. During the last five decades, India has established a strong technological base for producing safe and economic electricity through nuclear power, and in the use of radiation and radioisotopes for the benefit of society. Although people in general have been appreciating many of the above achievements, some of them are skeptical about the safety of nuclear reactors and impact on the environment. Large sections of society are also not aware of or are indifferent to many positive contributions that nuclear science and technology have made to everyday life. The Radioecology Research Laboratory of the University Science Instrumentation Centre, Mangalore University is engaged in frontline research studies on radioecology and radiation protection around the Kaiga Nuclear Power Plant in the west coast of India for the past 23 years. The general public perception on nuclear power and the results of the detailed scientific study on radioecology in the environment of a nuclear power plant are discussed

  2. The radiological accident of Goiania and the acceptance by the public of new nuclear power plants

    Meldonian, N.L.; Mattos, L.A.T.

    1998-01-01

    Misunderstandings on the peaceful uses and the safety of nuclear energy have been a leading cause of apprehension in Brazilian public opinion. A lack of knowledge of the characteristics and destination of radioactive wastes and negative media coverage of the use of nuclear energy have aggravated this situation. Believing that applications of nuclear energy are harmful to the population's welfare and the environment, Brazilian public opinion is opposed to the utilization of nuclear energy, and in particular to the construction of new nuclear power plants. For this reason, the Brazilian nuclear sector should promote a more intensive programme of public discussion, directed not solely at the technical and scientific communities, but also at the Brazilian public at large. Such a campaign would contribute towards a better understanding by Brazilian society of the different uses of nuclear energy and would present arguments in support of the benefits of this form of energy. Moreover, a campaign of this kind would show that negative associations about the use of electricity derived from nuclear power, which are based on the Goiania radiological accident, are not justified. (author)

  3. Analysis on perception of nuclear power plant and the preference of its policy alternatives for public acceptance

    Choi, Young Sung; Lee, Byong Whi

    1995-01-01

    Public acceptance has become an important factor in nuclear power program particularly after Chernobyl accident and recent rapid democratization in Korea. Methods reflection public opinions in order to improve public acceptance are firstly to understand what the public think about nuclear power plant and secondly to find out the public preference values for its policies. For this purpose, simplified multi-attribute utility(MAU) model was applied to analyze the public perception for five power production system. And the conjoint analysis was applied to find out he quantitative values of public preferences for twelve policy alternatives to improve the safety and support communities surrounding nuclear power plants in Korea. To implement these perception and preference analyses, mail survey was conducted to the qualified sample who had the experience of visiting nuclear power plant. Diagnosis of their perception pattern for five power production systems was made by the simplified MAU model. Estimation of the quantitative preference values for potential policy alternatives was made by the conjoint measurement technique, which made it possible to forecast the effectiveness of each option. The results from the qualified sample and the methods used in this study would be helpful to set up new policy of nuclear power plant. 4 figs., 7 tabs., 18 refs. (Author)

  4. Inspection of fire protection measures and fire fighting capability at nuclear power plants. A publication within the NUSS programme

    1994-01-01

    The present publication has been developed with the help of experts from regulatory, operating and engineering organizations, all with practical experience in the field of fire protection of nuclear power plants. The publication outlines practices for inspecting the fire protection measures at nuclear power plants in accordance with Safety Series No.50-SG-D2(Rev.1), Fire Protection in Nuclear Power Plants, and includes a comprehensive fire safety inspection checklist of the specific elements to be addressed when evaluating the adequacy and effectiveness of the fire protection measures and manual fire fighting capability available at operating nuclear power plants. The publication will be useful not only to regulators and safety assessors but also to operators and designers. The book addresses a specialized topic and it is recommended that it be used in conjunction with Safety Guide No.50-SG-D2(Rev.1)

  5. Effects of the accident at Mihama Nuclear Power Plant Unit 3 on the public's attitude to nuclear power generation

    Kitada, Atsuko

    2005-01-01

    As part of an ongoing public opinion survey regarding nuclear power generation, which started in 1993, a survey was carried out in the Kansai and Kanto regions two months after the accident at Unit 3 of the Mihama Nuclear Power Plant. In addition to analyzing the statistically significant changes that have taken place since the previous survey (taken in 2003), increase and decrease of the ratio of answers to all the questions related to nuclear power before and after the two accidents were compared in the case of the accidents which occurred in the Mihama Unit 3 and the JCO company's nuclear-fuel plant. In the Kansai region, a feeling of uneasiness about the risky character of nuclear power generation increased to some extent, while the public's trust in the safety of nuclear power plants decreased somewhat. After a safety-related explanation on ''Early detection of troubles'' and Accident prevention'' was given from a managerial standpoint, people felt a little less at ease than they had before. Uneasiness, however, did not increase in relation to the overall safety explanation given about the engineering and technical functioning of the plant. There was no significant negative effect on the respondents' evaluation of or attitude toward nuclear power generation. It was found that the people's awareness about the Mihama Unit 3 accident was lower and the effect of the accident on their awareness of nuclear power generation was more limited and smaller when compared with the case of the JCO accident. In the Kanto region, people knew less about the Mihama Unit 3 accident than those living in the Kansai region, and they remembered the JCO accident, the subsequent cover-up by Tokyo Electric Power Company, and the resulting power shortage better than those living in Kansai. This suggested that there was a little difference in terms of psychological distance in relation to the accidents an incidents depending on the place where the events occurred and the company which

  6. Public perceptions of the iodine tablets distribution around French nuclear power plants

    Charron, S.; Morin, D.; Brenot, J.

    2000-01-01

    In April 1996 the French ministry of health took the decision to distribute iodine tablets to the population surrounding all nuclear power plants in France. In case of a severe accident the absorption of stable iodine would prevent irradiation of the thyroid by radioactive iodine released by the plant. This preventive distribution was initiated at the end of 1996 around 4 pilot sites, and then spread to all sited in 1997. During this period, the large public sample surveys conducted by IPSN for its barometer contained questions on counter-measures in case of a nuclear accident and more specifically on the distribution of iodine tablets. The aim of this polls was to find out if the general public had known about this decision and to get some feedback on its reactions. The work presented in this paper is the detailed analysis of the two sets of data obtained by the answers to the polls. Some numerical treatments and tests were performed to compare the data, evaluate their consistency and analyse the relation between the distance to a nuclear site and the perception of the public. The main conclusions are that people living close to nuclear sites knew more about the on-going action of the ministry of health, and appreciated it more than the general population but in the same time, many people (70% of interviewed people) are quite reluctant to have tablets in their home; and 65% of the population directly concerned with the distribution did not know where to get their tablets. It is now intended to follow the potential evolution of this results in year 2000 when public authorities have to organise a new distribution of iodine tablets. (author)

  7. The Influence of Small-Scale Power Plant Supporting Schemes on the Public Trader and Consumers

    Renata Varfolomejeva

    2017-06-01

    Full Text Available The mechanism of support schemes for achieving the required share of renewable energy sources (RES was implemented into the energy sector. The issued amount of support requires state subsidies. The end-users of electricity are paying the mandatory procurement component taxes to cover these subsidies. The article examines the way of minimizing the influence of the existing RES supporting schemes on the consumers. The fixed purchased electricity price in the case of RES does not encourage producers to operate at hours of peak consumption or when the price is high. Modification of the RES support mechanisms at the legislative level, firstly, could minimize the influence of the mandatory procurement component on the end-users’ electricity price, and secondly, could provide a great opportunity for the public trader to forecast the operation of small power plants and their generation abilities. Numerical experiments with models of two types of power plants (biofuel and hydropower prove the existence of a problem and the presence of a solution. This problem constitutes the main subject of the present paper.

  8. The development and implementation of a public information programme at the Kozloduy nuclear power plant, Bulgaria

    Parker, Keith

    1998-01-01

    This paper proposes to examine the aims, approach and evaluation of a Public Information Programme currently being undertaken by the British Nuclear Industry Forum. The Kozloduy Nuclear Power Plant has awarded a contract to the British Nuclear Industry Forum to carry out a Public Information Programme with the objective of informing the people of Bulgaria about the content of the Nuclear Safety Account Grant Agreement, the role of the NSA, the role of EBRD and the donor countries in providing the necessary funding, the safety improvement programme being undertaken and the progress being made. The overall aim of the Programme is to build a consensus among energy consumers of the principal issues to be faced in the development and implementation of a Bulgarian energy strategy. There are a number of key elements of the Programme which include: 1) To carry out a communications audit in order to assess current structures and methods of information dissemination. This is to establish the Programme's requirements and provide a detailed operational plan. 2) To assess public opinion and general levels of awareness of the general public, workforce, press, government and industry regarding Kozloduy in order to establish priority messages and create and produce the necessary information material. 3) To review the plant's existing information centre and to provide training and support to facilitate the handling of public and press enquiries and also presentation training for the centre's personnel. 4) To create bespoke outreach programmes which will inform local and national Government, the workforce and local communities, women and schools of safety improvement processes. 5) To implement a media programme which will enable staff at the plant to deal effectively with inquiries and to enable them to anticipate media interest in a range of issues including the safety upgrade. 6) To organise a workshop on issue management so that participants can create and communicate an issue

  9. Rise and fall of public opposition in specific social movements. [Including nuclear power plants

    Leahy, P J [Akron Univ., OH (USA); Mazur, A [Syracuse Univ., NY (USA)

    1980-08-01

    This article reports a comparative study of four 'specific' social movements which involve aspects of technological controversy: Fluoridation, the ABM, Nuclear Power Plants, and Legalized Abortion. A theoretical model of the rise and fall of public opposition in these movements over time is suggested. Quantitative indicators are developed and applied to this historical model. Rise and fall of controversy follows a regular sequence: Activities of protest leaders increase during periods of great national concern over issues that are complementary to the movement; during these periods, social and economic resources are relatively available to the movement. As the activity of protest leaders increases, mass media coverage of their activities increases. As mass media coverage increases, opposition to the technology among the wider public increases. As the activity of the leaders wanes, mass media coverage declines, and so does opposition among the wider public. The paper concludes with a discussion of the relevance of this perspective for making predictions about the future course of 'specific' social movements.

  10. Global nuclear survey: Public support for new power plants remains tentative

    2005-01-01

    Full text: A new 18-country opinion survey sponsored by the International Atomic Energy Agency (IAEA) found that 'while majorities of citizens generally support the continued use of existing nuclear reactors, most people do not favour the building of new nuclear plants'. Indeed, the findings of the survey, conducted by Globescan Inc. show that 'six in ten citizens (62%) overall believe that existing nuclear reactors should continue to be used, yet six in ten (59%) do not favour new nuclear plants being built'. At a time when the nuclear power option is being vigorously pursued in the fast developing countries of Asia and being reconsidered in some European nations and the USA, the findings raise questions as to whether the nuclear industry and politicians have sufficiently raised public confidence in the safety and efficiency of the nuclear power option. Regionally, support for nuclear power is highest in South Korea, the United States and India, where clear pluralities support the building of new nuclear plants. In Morocco, Jordan, Saudi Arabia and Cameroon, pluralities prefer that all existing plants be shut down. The IAEA-sponsored survey was conducted between May and August this year in 18 countries representing all regions. Approximately 18,000 people were polled by telephone and in-person interviews. The opinion poll fielded six distinct questions, ranging from awareness of the IAEA and the effectiveness of IAEA inspections to support for peaceful nuclear applications and views about the security of nuclear materials and facilities and the threat of nuclear terrorism. Among the many revealing findings from the survey: 1) Pluralities of citizens in all but three of the 18 countries surveyed believe that IAEA inspections are not effective in monitoring countries' nuclear programmes. An average of 46 percent of people across the 18 countries surveyed say that IAEA inspections are not effective, while three in ten people (29%) say that they are; 2) Majorities in

  11. Influencing factors of public support for modern coal-fired power plant projects: An empirical study from China

    Liu, Feng; Lyu, Tao; Pan, Li; Wang, Fei

    2017-01-01

    With the development of clean coal technology, modern coal-fired power plants have achieved the similar emission standards as gas power plants. However, due to the impressions of high pollution and high emission in traditional coal-fired power plants, such projects are often opposed by local residents, which hinder the promotion of this technology. This manuscript aims to investigate public attitudes toward these projects and to analyze the influencing mechanisms of the factors of public support. The conceptual model was built with sense of place, trust and environmental attitude as the independent variables, benefit and cost perceptions as the mediating variables and public support as the dependent variable. The model was tested and modified by structural equation modelling. The results revealed that sense of place had a slight indirect impact (−0.043) on public support through benefit perception, whereas trust had a direct impact (0.332) on public support and indirect impacts (0.298) through benefit and cost perceptions. Environmental attitude had indirect impacts on public support through benefit perception (0.180) and cost perception (−0.115). In addition, policy suggestions on decision-making, project publicity and compensation strategy are proposed to enhance public support for similar projects. - Highlights: • This manuscript aims at eliminating the NIMBY effects on modern coal-fired power plant project. • A SEM model is proposed to explore how potential factors affect public support. • Trust is the dominant influencing factor to improve public support with both direct and indirect impacts. • Environmental attitude can also have positive effect on public support through rational compensation plans.

  12. Public hearing on the Barsebaeck nuclear power plant 27 Jan 1980

    1981-01-01

    Transcript of a hearing on possible consequences in Danish territory of an accident at the Swedish nuclear power plant at Barsebaeck. The hearing was arranged by OOA (Organization for Information about Atomic Power). Representatives from involved Danish authorities participated in the hearing. Subjects for discussions were health consequences, Danish emergency provisions, and radioactive land contamination. (BP)

  13. Lessons Learned in Protection of the Public for the Accident at the Fukushima Daiichi Nuclear Power Plant.

    Callen, Jessica; Homma, Toshimitsu

    2017-06-01

    What insights can the accident at the Fukushima Daiichi nuclear power plant provide in the reality of decision making on actions to protect the public during a severe reactor and spent fuel pool emergency? In order to answer this question, and with the goal of limiting the consequences of any future emergencies at a nuclear power plant due to severe conditions, this paper presents the main actions taken in response to the emergency in the form of a timeline. The focus of this paper is those insights concerning the progression of an accident due to severe conditions at a light water reactor nuclear power plant that must be understood in order to protect the public.

  14. On nuclear power plant uprating

    Ho, S. Allen; Bailey, James V.; Maginnis, Stephen T.

    2004-01-01

    Power uprating for commercial nuclear power plants has become increasingly attractive because of pragmatic reasons. It provides quick return on investment and competitive financial benefits, while involving low risks regarding plant safety and public objection. This paper briefly discussed nuclear plant uprating guidelines, scope for design basis analysis and engineering evaluation, and presented the Salem nuclear power plant uprating study for illustration purposes. A cost and benefit evaluation of the Salem power uprating was also included. (author)

  15. Nuclear power plants

    1985-01-01

    Data concerning the existing nuclear power plants in the world are presented. The data was retrieved from the SIEN (Nuclear and Energetic Information System) data bank. The information are organized in table forms as follows: nuclear plants, its status and type; installed nuclear power plants by country; nuclear power plants under construction by country; planned nuclear power plants by country; cancelled nuclear power plants by country; shut-down nuclear power plants by country. (E.G.) [pt

  16. Economic estimation of the external effect on the security of energy and public acceptance for nuclear power plants in Japan

    Fujimoto, Noboru; Morita, Koji; Fukuda, Kenji

    2000-01-01

    Energy taxes in Japan, i. e., three laws of electric power source, crude oil customs duties and oil taxes, as well as the fuel stock of the power plants have been investigated, and the economical estimation for the nuclear power generation has been carried out from standpoints of the security of energy and public acceptance. For the security, it has been clear that the nuclear power is advanced in internalization of fuel stock by external economy and diversification of electric power source by external diseconomy, but oil and LNG thermal power generation is not sufficiently internalized. None of the power source has paid for the compensation for the risk in public acceptance. The fuel stock for the thermal power is estimated to be for about one week to a month, whereas nuclear power plants have a potential stock that lasts for 3 years. The external effect could go up to 35 billion yen if it is converted to fuel. The predominance, therefore, of the nuclear power for the security of energy is confirmed. Also, it is presumable that the external cost for the fuel stock, so called, is larger than the one for risk and CO 2 reduction. (author)

  17. Public regulation of site selection for nuclear power plants. Present procedures and reform proposals: an annotated bibliography

    Klema, E.D.; West, R.L.

    1977-01-01

    Part I of this bibliography contains literature which describes the process of power-plant siting as conducted by the utilities, siting procedures at the point of initiative, analytical tools employed or proposed for site assessment by enterprises in the industry, and the wide range of considerations which the utilities take into account in making site assessments. Part II contains studies and reports on the structure and process of public regulation of power plant siting: the licensing of nuclear facilities by the NRC under terms of the special Government powers in the field of nuclear energy that have evolved since World War II; the steady expansion of regulatory objectives bearing on site approval for nuclear power plants; local government, State, and other Federal agency regulation of siting; survey siting procedures in other countries; the role of regulatory delay in the long lead-time required for construction and operation of nuclear plants. Part III incudes citations on regulatory structure and practice that are unresponsive to the public interest; regulatory decision making's insufficient accessible to public scrutiny and participation; and regulatory procedures that encourage and protect inefficient practices of the regulated industries. Some legal decisions and case studies are included. Part IV, Reform Proposals, includes citations on regulatory reform and reform of siting regulations. Abstracts are provided with 157 of the citations with many more papers cited by title, author, and accession data

  18. Kansas Power Plants

    Kansas Data Access and Support Center — The Kansas Power Plants database depicts, as point features, the locations of the various types of power plant locations in Kansas. The locations of the power plants...

  19. Incentive regulation of investor-owned nuclear power plants by public utility regulators

    McKinney, M.D.; Elliot, D.B.

    1993-01-01

    The US Nuclear Regulatory Commission (NRC) periodically surveys the Federal Energy Regulatory Commission (FERC) and state regulatory commissions that regulate utility owners of nuclear power plants. The NRC is interested in identifying states that have established economic or performance incentive programs applicable to nuclear power plants, including states with new programs, how the programs are being implemented, and in determining the financial impact of the programs on the utilities. The NRC interest stems from the fact that such programs have the potential to adversely affect the safety of nuclear power plants. The information in this report was obtained from interviews conducted with each state regulatory agency that administers an incentive program and each utility that owns at least 10% of an affected nuclear power plant. The agreements, orders, and settlements that form the basis for each incentive program were reviewed as required. The interviews and supporting documentation form the basis for the individual state reports describing the structure and financial impact of each incentive program

  20. MIGRATORY GAME BIRDS AS A SOURCE OF PUBLIC EXPOSURE FROM THE FUKUSHIMA NUCLEAR POWER PLANT ACCIDENT

    I. P. Stamat

    2011-01-01

    Full Text Available This article examines assessments of the impact of the Fukushima nuclear power plant accident on exposure of the Russian Federation population related to the seasonal migration of game birds. Intake of artificial radionuclides with meat of migratory game birds is shown to be one of the major pathways for the population exposure in the Far Eastern region of the country.

  1. A questionnaire survey about public's image of radiation after the Fukushima Dacha Nuclear Power Plant accident

    Okazaki, Ryuji; Ootsuyama, Akira; Kubo, Tatsuhiko; Abe, Toshiaki

    2012-01-01

    A questionnaire survey about the public's image of radiation was performed after the Fukushima Daiichi nuclear power plant (FDNPP) accident. The survey was taken by general citizens (200 and 1,640 in Fukushima and 52 outside of Fukushima) and doctors (63 in Fukushima and 1,942 outside of Fukushima (53 in Oita, 44 in Sagamihara and 1,845 in Kitakyushu) in and outside of Fukushima and second year medical students in the University of Occupational and Environmental Health, Japan. The questionnaire surveys were performed during lectures about radiation. The response rates were 86% for the general citizens in Fukushima, 91% for the general citizens outside of Fukushima, 86% for doctors in Fukushima, 85% and 86% for doctors in Sagamihara and Oita, respectively. The questionnaire surveys were sent to clinics and hospitals in Fukushima where the general citizens answered with a response rate of 50%. When the questionnaire surveys were sent to clinics and hospitals in Kitakyushu, doctors answered, with a response rate of 17%. The percentages of anxiety about future radiation effects after the FDNPP accident were the highest among the general citizens (71.6% in Fukushima and 40.4% outside of Fukushima), in the middle among the doctors (30.2% in Fukushima and 26.2% outside of Fukushima) and the lowest among the medical students (12.2%). The doctors in Fukushima and the medical students were anxious about food and soil pollution. The general citizens and the detectors outside of Fukushima were anxious about health problems and food and soil pollution. We concluded that a high level of education about radiation decreased the anxiety about the radiation effects. It is important to spread knowledge about radiation. (author)

  2. Location sites for nuclear power plants and the public drinking water supplies

    1987-05-01

    This report presents the results of a study by the Dutch RIWA- Working Group Nuclear Power Plants, of the possible effects of a nuclear-reactor melt-down accident upon the drinking-water supply in the Netherlands which is dependent on surface waters. The aim of this report is to contribute to the 're-consideration with regard to siting of nuclear power plants' of the Dutch government. In the case of a nuclear-reactor melt-down accident in the Netherlands or directly adjacent countries, surface waters destined for drinking-water production may be contaminated severely. The amount of contamination depends, among other things, upon the distance, wind direction, dry as well as wet deposition and the features of the place yielding drinking water. From calculations of contamination of surface waters in the case of open- supply build up it appears that the derived norm of the radionuclide cocktail may be exceeded for a period of weeks up to several months or even years. There are reasons to draw the same conclusion for supply build up in the dunes by means of surface infiltration in the dunes. A melt-down accident can cause very severe contamination. Also here it can be stated that, in the case of a calamity in the Netherlands or directly adjacent countries, a norm transgression may occur for weeks up to years. In view of the risks which nuclear power plants can hold for the drinking-water supply which depends upon surface-waters as basis element. Severe objections should be made with respect to the siting of nuclear power plants in the Netherlands unless the occurrence of melt-down accidents could be excluded. 11 refs.; 4 figs.; 7 tabs

  3. Hand-calculation technique for the evaluation of public risk from a severe accident at a nuclear power plant

    Linn, M.A.; Schmoyer, R.E.

    1993-01-01

    The Nuclear Regulatory Commission (NRC) is in the process of promulgating a proposed rule 10 CFR Part 54, ''Requirements for Renewal of Operating Licensees for Nuclear Power Plants,'' which will allow licenses to renew the operating licenses on their nuclear power plants for an additional 20 years beyond the original 40-year limit. A Generic Environmental Impact Statement (GEIS) prepared by the Oak Ridge National Laboratory (ORNL) in conjunction with and for the Nuclear Regulatory Commission to assess the environmental issues associated with this proposed rule. The evaluation of the environmental impact from postulated severe accidents was included in the GEIS. During this evaluation of postulated severe accidents, a method was developed to estimate the public health consequences of atmospheric releases from severe accidents that is much simpler to use than existing consequence computer codes. From the results of this work, it is concluded that the simplified methodology does provide reasonable and conservative estimates of public risk from atmospheric releases from severe accidents

  4. National character and communication. Attitude toward nuclear power plant and its public relations

    Hayashi, Chikio; Morikawa, Shinichi.

    1994-01-01

    The attitude structure toward nuclear power plant is analyzed with the attitudes toward relevant matters, for example image for nuclear power, knowledge of nuclear power, attitudes toward energy and environment, anxiety about various matters, cognition of risk, social and political attitudes and Japanese national character. Six types are revealed, that is to say, indifference group (13%), strongly favorable group (11%), strongly unfavorable group (9%), fairly favorable group (12%), fairly unfavorable group (5%), and intermediate group (50%). Strongly favorable and unfavorable groups are similar in some points and different in other points, for they are both rational whereas the former is optimistic in the attitude toward science and technology and less interested in environmental problems, and the latter is pessimistic in the attitude toward science and technology and extremely sensitive to environmental problems. The intermediate group has so-called Japanese -like characteristics. It is shown that the emotional persuasion and that based on fact presentation are particularly desirable for this group. (author)

  5. National character and communication. Attitude toward nuclear power plant and its public relations

    Hayashi, Chikio [Institute of Statistical Mathematics, Tokyo (Japan); Morikawa, Shinichi

    1995-10-01

    The attitude structure toward nuclear power plant is analyzed with the attitudes toward relevant matters, for example image for nuclear power, knowledge of nuclear power, attitudes toward energy and environment, anxiety about various matters, cognition of risk, social and political attitudes and Japanese national character. Six types are revealed, that is to say, indifference group (13%), strongly favorable group (11%), strongly unfavorable group (9%), fairly favorable group (12%), fairly unfavorable group (5%), and intermediate group (50%). Strongly favorable and unfavorable groups are similar in some points and different in other points, for they are both rational whereas the former is optimistic in the attitude toward science and technology and less interested in environmental problems, and the latter is pessimistic in the attitude toward science and technology and extremely sensitive to environmental problems. The intermediate group has so-called Japanese-like characteristics. It is shown that the emotional persuasion and that based on fact presentation are particularly desirable for this group. (author)

  6. National character and communication. Attitude toward nuclear power plant and its public relations

    Hayashi, Chikio; Morikawa, Shinichi.

    1995-01-01

    The attitude structure toward nuclear power plant is analyzed with the attitudes toward relevant matters, for example image for nuclear power, knowledge of nuclear power, attitudes toward energy and environment, anxiety about various matters, cognition of risk, social and political attitudes and Japanese national character. Six types are revealed, that is to say, indifference group (13%), strongly favorable group (11%), strongly unfavorable group (9%), fairly favorable group (12%), fairly unfavorable group (5%), and intermediate group (50%). Strongly favorable and unfavorable groups are similar in some points and different in other points, for they are both rational whereas the former is optimistic in the attitude toward science and technology and less interested in environmental problems, and the latter is pessimistic in the attitude toward science and technology and extremely sensitive to environmental problems. The intermediate group has so-called Japanese-like characteristics. It is shown that the emotional persuasion and that based on fact presentation are particularly desirable for this group. (author)

  7. National character and communication. Attitude toward nuclear power plant and its public relations

    Hayashi, Chikio [Institute of Statistical Mathematics, Tokyo (Japan); Morikawa, Shinichi

    1994-05-01

    The attitude structure toward nuclear power plant is analyzed with the attitudes toward relevant matters, for example image for nuclear power, knowledge of nuclear power, attitudes toward energy and environment, anxiety about various matters, cognition of risk, social and political attitudes and Japanese national character. Six types are revealed, that is to say, indifference group (13%), strongly favorable group (11%), strongly unfavorable group (9%), fairly favorable group (12%), fairly unfavorable group (5%), and intermediate group (50%). Strongly favorable and unfavorable groups are similar in some points and different in other points, for they are both rational whereas the former is optimistic in the attitude toward science and technology and less interested in environmental problems, and the latter is pessimistic in the attitude toward science and technology and extremely sensitive to environmental problems. The intermediate group has so-called Japanese -like characteristics. It is shown that the emotional persuasion and that based on fact presentation are particularly desirable for this group. (author)

  8. Finance structure and public enlightenment program of the first Turkish nuclear power plant project (a case study)

    Lutfi Sarici, E.

    2000-01-01

    This paper deals with four closely related subjects. These are: the positioning of nuclear energy in Turkey's energy planning by presenting supply and demand figures of electricity, giving emphasis to resource availability, pointing out the necessity of diversification of resources; the ongoing situation for realization of the Akkuyu Project with its updated milestones, alternative offers requested for the Akkuyu Nuclear Power Plant and member companies of the consortiums who already have submitted the three bids; the financing of big-scale energy investment projects in developing countries by giving special emphasis to the Akkuyu Nuclear Power Plant Project including the financing requirements in the Bid Specifications, OECD rules for financing, the requirements of financial agents, and financing means of domestic participation; public enlightenment during establishment of nuclear power in Turkey. (author)

  9. Information features and activities needed to build public acceptance for the first nuclear power plant in Indonesia

    Santosa, H.B.

    1998-01-01

    The global tendency toward sustainable development and free market policies, combined with the fuzzy thinking of Indonesian people and the Indonesian anti-nuclear groups, provide an opportunity to formulate options to disseminate information and conduct related activities. Obtaining successful public acceptance depends on the spectrum of cooperation and achievement of mutual understanding between Nuclear Power Plant (NPP) vendors, relevant Indonesian institutions and the nuclear communities in ASEAN and Asian countries. The most significant factor in getting good public acceptance of nuclear power usage is the proof that Indonesian engineers and scientists working with NPPs are competent and that there is a clear national benefit. However all information should be packaged in a proper way, suitable to public needs, and distributed in a way that makes optimal use of existing methods of distribution. The governmental and traditional social system methods of interaction cannot be avoided. (authors)

  10. Integrated safety assessment of Indian nuclear power plants for extreme events: reducing impact on public mind

    Kakodkar, Anil; Singh, Ram Kumar

    2013-01-01

    Nuclear energy professionals need to understand and address the catastrophe syndrome that of late seems to be increasingly at work in public mind in the context of nuclear energy. Classically the nuclear power reactor design and system evolution has been based on the logic of minimization of risk to an acceptable level and its quantification based on a deterministic approach and backed up by a further assessment based on the probabilistic methodology. However, in spite of minimization of risk, the reasons for anxiety and trauma in public mind that still prevails in the context of severe accidents needs to be understood and addressed. Margins between maximum credible accidents factored in the design and the ultimate load withstanding capacities of relevant systems need to be enhanced and guaranteed with a view to minimize release of radioactivity and avoid serious impact in public domain. A more realistic basis for management of an accident in public domain also needs to be quantified for this purpose. Assurance to public on limiting the consequences to a level that does not lead to a trauma is something that we need to be able to credibly demonstrate and confirm. The findings from Chernobyl reports point to significant psychological effects and related health disorders due to large scale emergency relocation of people that could have been possibly reduced by an order of magnitude without significant additional safety detriment

  11. Rules of thumb from plant data to estimate the public consequences of a nuclear power plant accident

    Baggenstos, M.; Uboldi, P.; Schulz, R.

    2001-01-01

    In an accident situation with core degradation there is typically a pre-phase in which the radioactivity is inside the primary system and the containment before a release to the environment. The assessment of the possible risk to the public in this situation must be based on the situation inside the plant (violation of safety parameters) and a forecast of the containment behaviour to be expected. To obtain a first quick estimate of the source term and, therefore, the off-site dose rules of thumb were established which should fulfil the following purposes: assessment of the danger, estimated from plant data, estimation of the dose at the critical point outside based on the dose rate inside the containment. The rules of thumb which were introduced in Switzerland, are explained. The assessment is based on roughly 30 plant parameters which are transmitted in case of an accident in real-time. The rules were designed in such a way that they rely on simply determined parameters such core exit temperature or dose rate in the containment. (orig.) [de

  12. Nuclear power plant safety

    Otway, H.J.

    1974-01-01

    Action at the international level will assume greater importance as the number of nuclear power plants increases, especially in the more densely populated parts of the world. Predictions of growth made prior to October 1973 [9] indicated that, by 1980, 14% of the electricity would be supplied by nuclear plants and by the year 2000 this figure would be about 50%. This will make the topic of international co-operation and standards of even greater importance. The IAEA has long been active in providing assistance to Member States in the siting design and operation of nuclear reactors. These activities have been pursued through advisory missions, the publication of codes of practice, guide books, technical reports and in arranging meetings to promote information exchange. During the early development of nuclear power, there was no well-established body of experience which would allow formulation of internationally acceptable safety criteria, except in a few special cases. Hence, nuclear power plant safety and reliability matters often received an ad hoc approach which necessarily entailed a lack of consistency in the criteria used and in the levels of safety required. It is clear that the continuation of an ad hoc approach to safety will prove inadequate in the context of a world-wide nuclear power industry, and the international trade which this implies. As in several other fields, the establishment of internationally acceptable safety standards and appropriate guides for use by regulatory bodies, utilities, designers and constructors, is becoming a necessity. The IAEA is presently planning the development of a comprehensive set of basic requirements for nuclear power plant safety, and the associated reliability requirements, which would be internationally acceptable, and could serve as a standard frame of reference for nuclear plant safety and reliability analyses

  13. Public power costs less

    Moody, D.

    1993-01-01

    The reasons why residential customers of public power utilities paid less for power than private sector customers is discussed. Residential customers of investor-owned utilities (IOU's) paid average rates that were 28% above those paid by customers by possibly owned systems during 1990. The reasons for this disparity are that management costs faced by public power systems are below those of private power companies, indicating a greater efficiency of management among public power systems, and customer accounts expenses averaged $33.00 per customer for publicly owned electric utilities compared to $39.00 per customer for private utilities

  14. Popular participation and public hearing by construction of nuclear power plants

    Hokimoto, Ichiro

    1977-01-01

    One of the urgent problems now confronting the atomic power development is to search a legal measure for obtaining the public acceptance with the premise of understanding and cooperation, and it is discussed. Attention is paid to the present status of Japan, in which the legal system is incomplete, and the administrative process unspecified in laws and ordinances must be considered seriously. The first section deals with the public hearing and its problems concerning the installation of reactors. The list of twelve main problems that were pointed out in the manual of holding the public hearing by the council of Japanese scientists is given. The most important points are as follows: (a) the public hearing must be held at such time that the feed back is possible to reflect the points of discussion to the final determination; (b) enough data and information must be provided and noticed beforehand, and the sufficient opportunity of discussion must be ensured; and (c) the scientists recommended by local inhabitants must be included in order to assist laity, and the points of discussion must be adjusted scientifically. The second section deals with the popular participation in fact. In conclusion, it is said that there are several traps in the ''inhabitant participation'', and it is the danger to change into the ''engineering of consent'' which fulfill buffer functions for expecting and avoiding the repulsion and criticism of inhabitants against the administration. It may be only eyes of scientists to check the dark reversal from the conveyance of will and ideas of inhabitants to the authority. (Iwakiri, K.)

  15. Advice concerning radionuclide release of nuclear power plants and public health

    1984-01-01

    Amongst the severe accidents with nuclear power plants, a number of scenario's is theoretically possible. These scenario's lead to more or less serious consequences for the environment. Characteristics for the category of accidents was the early breakdown of the containment of the reactor. In recent years more and more doubt has risen with regard to the most serious scenario KE. In the Netherlands the Committee for Reactor Safety (CRV) has reported on this subject (annex 1). According to the CRV the release of a number of important radionuclides, in the case of scenario KE, will be very much less than was supposed in the past. Also, the nuclides will be released much later than was supposed before. A committee of the Dutch Health Council, starting from the CRV-report, has made calculations on the radiological consequences of the KE-scenario, corrected in accordance with these new developments (KEH). As could be expected, this category KEH proves to be considerably less dangerous than was supposed before. Irradiation of the surrounding population with a lethal dose would not occur anymore. The number of somatic and genetic effects would be very small. The conclusions drawn from these calculations are given. These results are compared with calculated consequences of an accident of the KM-category. The CRV has defined a maximised accident from this category (KMM). The report includes the report of the Dutch Commission on Reactor Safety (CR-82-71) as an appendix. (Auth.)

  16. Population morbidity in the Zaporizhzhia Nuclear Power Plant observation zone as an integral part of public health.

    Khomenko, I M; Zakladna, N V; Orlova, N M

    2017-12-01

    To evaluate the health status of adult population living in the Ukrainian nuclear power industry obser vation zone on the example of Zaporizhzhia Nuclear Power Plant. System review, analytic, sociological survey and statistical methods. There was established an increase in the incidence of digestive diseases among adult population in Nikopol of Dnipropetrovsk region, which is included in the Zaporizhzhia NPP observation zone. The highest increase was observed in the incidence of peptic ulcer, gastritis and duodenitis, cholecystitis and cholangitis by 340 %, 305 % and 83 %, respectively. In connection with the residence in industrially developed region and NPP life extension in Ukraine, the possible influence of harmful factors on health status of the population of observation zones, an increase in the incidence of digestive diseases among adult population, there is required continuous monitoring and detailed study of public health. I. M. Khomenko, N. V. Zakladna, N. M. Orlova.

  17. Information to the public on risk prevention arising from energy production in nuclear power plants

    Giannangeli, C.A.; Bermudez, L.A.; Sanchez, R.A.

    1998-01-01

    Full text: The lack of knowledge about ionizing radiation and the fear connected with their pacific applications, is a matchless fact, which is relevant in our society, promoting and important controversy. Several origin lines meet in this point: non pacific uses of nuclear energy, Chernobyl accident, final disposal of radioactive wastes, and manipulation of information against nuclear power. They are based on emotional strategies, producing a detriment in the value of impartial information, which lays in a secondary place. The aim of this paper is to analyze the conditions of a communication process, to transmit objective information about radiation, in different levels of reception, and present guide lines to socially relevant institutions, including physicians and health stations as well as public in general, in terms of training and contacts with groups closely related with radiation knowledge. To do this, a survey in a radius of 50 km around the nuclear stations to determine the factors affecting the perception of radiation risks was carried out. The results showed three outstanding factors: 'fear', 'ignorance' and 'exposed population' with different points of view related to the social context and individual characteristics of surveyed people. Within this framework, a health system for radiological events in three level of organization, as well as training programs and evaluation of the systems to face such events, is published. (author) [es

  18. RBMK nuclear power plants: Generic safety issues. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

    1996-05-01

    This report has been prepared on the basis of above mentioned report and it is intended to provide information on RBMK NPPs generic safety issues. As all other insights, recommendations and conclusions resulting from the IAEA Programme, this report is intended to assist national decision makers, who have sole responsibility for the regulation and safe operation of their nuclear power plants. It also serves to focus national and international projects on priority of the RBMK safety improvements. 23 refs, 10 figs, 3 tabs

  19. Studies for the layout and technical conception of a two-circuit HTR power plant of 600 MWsub(el) under public utilizer aspects

    Schuetten, R.

    1981-01-01

    In this study concerning conceptions for a nuclear power plant of 600 MWsub(el) with high-temperature reactor a conception for a HTR-nuclear power plant of 600 MWsub(el) to be built in the Federal Republic of Germany in future is developed on the basis of operating experience with the 15-MW-AVR-experimental nuclear power plant, the construction of the THTR-300 nuclear power plant and the gas-cooled reactors of English, French and American origin. This report gives a survey of the most important findings and the requirements on behalf of the public utilities for a nuclear power plant with high-temperature reactor with the dimensions of 600 MWsub(el). The examination of the utilities basic requirements for a power plant and the experience made during the licensing procedure led to this technical and safety conception for a HTR nuclear power plant with spherical fuel elements. In addition, the questions of the possibility of recurrent tests and of repairing safety components and also the future shut-down of the power plant, which are important for the public utilities, are examined. (orig./GL) [de

  20. Small hydroelectric power plants

    Helgesen, Boerre

    2002-01-01

    Small hydroelectric power plants are power plants of 1 - 10 MW. For a supplier, this is an unnatural limit. A more natural limit involves compact engine design and simplified control system. The article discusses most of the engine and electrotechnical aspects in the development, construction and operation of such a plant

  1. Public exposure from environmental release of radioactive material under normal operation of unit-1 Bushehr nuclear power plant

    Sohrabi, M.; Parsouzi, Z.; Amrollahi, R.; Khamooshy, C.; Ghasemi, M.

    2013-01-01

    Highlights: ► The unit-1 Bushehr nuclear power plant is a VVER type reactor with 1000 MWe power. ► Doses of public critical groups living around the plant were assessed under normal reactor operation conditions. ► PC-CREAM 98 computer code developed by the HPA was applied to assess the public doses. ► Doses are comparable with those in the FSAR, in the ER and doses monitored. ► The doses assessed are lower than the dose constraint of 0.1 mSv/y associated with the plant. - Abstract: The Unit-1 Bushehr Nuclear Power Plant (BNPP-1), constructed at the Hallileh site near Bushehr located at the coast of the Persian Gulf, Iran, is a VVER type reactor with 1000 MWe power. According to standard practices, under normal operation conditions of the plant, radiological assessment of atmospheric and aquatic releases to the environment and assessment of public exposures are considered essential. In order to assess the individual and collective doses of the critical groups of population who receive the highest dose from radioactive discharges into the environment (atmosphere and aquatic) under normal operation conditions, this study was conducted. To assess the doses, the PC-CREAM 98 computer code developed by the Radiation Protection Division of the Health Protection Agency (HPA; formerly called NRPB) was applied. It uses a standard Gaussian plume dispersion model and comprises a suite of models and data for estimation of the radiological impact assessments of routine and continuous discharges from an NPP. The input data include a stack height of 100 m annual radionuclides release of gaseous effluents from the stack and liquid effluents that are released from heat removal system, meteorological data from the Bushehr local meteorological station, and the data for agricultural products. To assess doses from marine discharges, consumption of sea fish, crustacean and mollusca were considered. According to calculation by PC-CREAM 98 computer code, the highest individual

  2. Lessons learned from Fukushima Daiichi nuclear power plant accident: efficient education items of radiation safety for general public.

    Ohno, K; Endo, K

    2015-07-01

    The Fukushima Daiichi nuclear power plant (FNP-1) accident, while as tragic as the tsunami, was a man-made disaster created by the ignorance of the effects of radiation and radioactive materials. Therefore, it is important that all specialists in radiation protection in medicine sympathize with the anxiety of the general public regarding the harmful effects of radiation and advise people accordingly. All questions and answers were collected related to inquiries from the general public that were posted to reliable websites, including those of the government and radiation-related organizations, from March 2011 to November 2012. The questions were summarized and classified by similarity of content. (1) The total number of questions is 372. The content was broadly classified into three categories: inquiries for radiation-related knowledge and about health effects and foods. The questions asked to obtain radiation-related knowledge were the most common, accounting for 38 %. Thirty-six percentage of the questions were related to health effects, and 26 % involved foods, whereas 18 % of the questions were related to children and pregnancy. (2) The change over time was investigated in 290 questions for which the time of inquiry was known. Directly after the earthquake, the questions were primarily from people seeking radiation-related knowledge. Later, questions related to health effects increased. The anxiety experienced by residents following the nuclear accident was caused primarily by insufficient knowledge related to radiation, concerns about health effects and uncertainties about food and water safety. The development of educational materials focusing on such content will be important for risk communication with the general public in countries with nuclear power plants. Physicians and medical physicist should possess the ability to respond to questions such as these and should continue with medical examinations and treatments in a safe and appropriate manner. © The

  3. Lessons learned from Fukushima Daiichi nuclear power plant accident: efficient education items of radiation safety for general public

    Ohno, K.; Endo, K.

    2015-01-01

    The Fukushima Daiichi nuclear power plant (FNP-1) accident, while as tragic as the tsunami, was a man-made disaster created by the ignorance of the effects of radiation and radioactive materials. Therefore, it is important that all specialists in radiation protection in medicine sympathize with the anxiety of the general public regarding the harmful effects of radiation and advise people accordingly. All questions and answers were collected related to inquiries from the general public that were posted to reliable web sites, including those of the government and radiation-related organizations, from March 2011 to November 2012. The questions were summarized and classified by similarity of content. (1) The total number of questions is 372. The content was broadly classified into three categories: inquiries for radiation-related knowledge and about health effects and foods. The questions asked to obtain radiation-related knowledge were the most common, accounting for 38 %. Thirty-six percentage of the questions were related to health effects, and 26 % involved foods, whereas 18 % of the questions were related to children and pregnancy. (2) The change over time was investigated in 290 questions for which the time of inquiry was known. Directly after the earthquake, the questions were primarily from people seeking radiation-related knowledge. Later, questions related to health effects increased. The anxiety experienced by residents following the nuclear accident was caused primarily by insufficient knowledge related to radiation, concerns about health effects and uncertainties about food and water safety. The development of educational materials focusing on such content will be important for risk communication with the general public in countries with nuclear power plants. Physicians and medical physicist should possess the ability to respond to questions such as these and should continue with medical examinations and treatments in a safe and appropriate manner

  4. Challenge in the public acceptance and cooperation in the verge of building the first nuclear power plant in Indonesia - 59119

    Susetyo Hario, Putero; Haryono Budi, Santosa

    2012-01-01

    Document available in abstract form only. Full text of publication follows: Indonesia plans to build the first nuclear power plant (NPP) to solve the country's energy problems. One of the challenges that must be handled before establishing the first NPP is the presence of anti-nuclear groups that have successfully made the government postpone its plan several times since the first nuclear research reactor was established in Bandung (1972). The basis for the groups' dissent is the presence, and handling of radioactive waste. Further, the general public perception - even among educated Indonesians - is that Indonesia's experts lack knowledge about nuclear technology, even though nuclear technology has been studied in Indonesia since 1954. So, the problem is one of disseminating information about nuclear technology. To address this challenge, the National Atomic Energy Board (BATAN) of Indonesia has to redesign its public outreach strategy by collaborating with the educational institutions and communications organizations. Gadjah Mada University is the only university in Indonesia offering a nuclear-engineering curriculum. Therefore, a teaming arrangement with this institution seems appropriate to help improve the public's general knowledge about nuclear technology. There are several strategies that could be designed within the frame work of collaboration. The first strategy is to introduce nuclear technology into Indonesia's elementary and secondary schools. These youngsters are still in their formative years and are absorbing science and technology with great attention. (authors)

  5. The development of public relations at the Dukovany nuclear power plant

    Rerucha, F.; Urbasek, R.

    2000-01-01

    The article describes the development of mutual relations between the Dukovany NPP and the public and institutions within the region and presents evaluation of the current status and topical tasks for the benefit of a further progress in such relations. The importance is stressed of the role of the communication process, preparation and purposefulness of the forms and methods in implementing the communication policy by the NPP's Public Relations department towards individual target groups of the public. (author)

  6. Less power plants

    TASR

    2003-01-01

    In the Slovak Republic the number of company power plants decreased as against 2001 by two sources. In present time only 35 companies have their own power plants. The companies Slovnaft, Kappa Sturovo, Slovensky hodvab Senica, Matador Puchov, Maytex Liptovsky MikuIas, Kovohuty Krompachy, Chemko Strazske and some Slovak sugar factories belong to the largest company power plants in force of distributing companies. Installed output of present 35 company sources is 531 MW. The largest of separate power plants as Paroplynovy cyklus Bratislava (218 MW) and VD Zilina (72 MW) belong to independent sources. Total installed output of Slovak sources was 8306 MW in the end of last year

  7. Summary of replies to the public consultation on the virtual power plants (VPP) system implemented by EDF

    NONE

    2006-07-01

    From 15 December 2005 to 13 January 2006, CRE organized a public consultation on the Virtual Power Plants (VPP) system implemented by EDF. The questions asked to the contributors concerned: their assessment of the effect of VPP on the French market during the period 2001-2005; their suggestions concerning the continuation or stopping of the current system, or concerning the setting up of a new system of energy or generation capacity release by EDF. Twenty three players in the French electricity market answered this consultation. The replies made by the various contributors to each question are very diversified. This document presents the summary of replies received, question by question. (A.L.B.)

  8. Summary of replies to the public consultation on the virtual power plants (VPP) system implemented by EDF

    2006-01-01

    From 15 December 2005 to 13 January 2006, CRE organized a public consultation on the Virtual Power Plants (VPP) system implemented by EDF. The questions asked to the contributors concerned: their assessment of the effect of VPP on the French market during the period 2001-2005; their suggestions concerning the continuation or stopping of the current system, or concerning the setting up of a new system of energy or generation capacity release by EDF. Twenty three players in the French electricity market answered this consultation. The replies made by the various contributors to each question are very diversified. This document presents the summary of replies received, question by question. (A.L.B.)

  9. A science writer' view about the information the public looked for after the Fukushima Daiichi nuclear power plant accident

    Matsunaga, Waki

    2012-01-01

    The public was confused at a lot of information after the Fukushima Daiichi nuclear power plant accident. Especially, they were perplexed about effects of low-dose radiation exposure, because expert opinions varied with regard to safety and danger. Politicians and mass media insisted that irrational behaviors of the public caused unnecessary damages. But they were unable to understand the radiation health risk, so it was natural that the feelings of uncertainty intensified affective reactions and invited chaos. They worried about food and water contamination in spite of the low levels of monitoring data. That's why the government set very low regulation values for radioactivity in foods and drink without consideration of the principle of optimization that the International Commission on Radiological Protection had recommended. Although the concept of optimization is very important for understanding and management of the risks after this disaster, the government and many scientists did not explain about it. I think the provision of various kinds of information on both risks and socio-economic effects of various activities in society could enhance the interest of the public in the radiation risk and its management strategy, and contribute to the understanding the concept of optimization. (author)

  10. Minutes of the public hearing concerning questions of environmental protection: nuclear power plant waste management

    1977-01-01

    Minutes of questions of members of the Bundestag addressed to experts of the pro and con camp, of answers and of written statements on the following central subjects: Concept of waste management; fuel cycle centers; technology of fuel reprocessing plants; safety. (HP) [de

  11. Solar thermal power plants

    Schnatbaum, L.

    2009-01-01

    The solar thermal power plant technology, the opportunities it presents and the developments in the market are outlined. The focus is on the technology of parabolic trough power plants, a proven technology for solar power generation on a large scale. In a parabolic trough power plant, trough-shaped mirrors concentrate the solar irradiation onto a pipe in the focal line of the collector. The thermal energy thus generated is used for electricity generation in a steam turbine. Parabolic trough plants can be combined with thermal storage and fossil or biomass fired heat exchangers to generate electricity even when the sun is not shining. Solar Millennium AG in Erlangen has developed the first power plant of this kind in Europe. After two years of construction the plant started operation in Southern Spain in 2008. This one and its sister projects are important steps leading the way for the whole market. The paper also covers the technological challenges, the key components used and the research and development activities concerning this technology. Solar thermal power plants are ideal for covering peak and medium loads in power grids. In hybrid operation they can also cover base-load. The Solar Chimney power plant, another striking technology for the conversion of solar into electric energy, is described briefly. The paper concludes with a look at the future - the import of solar energy from the deserts of North Africa to central Europe. (author)

  12. Power plant chemical technology

    NONE

    1996-12-01

    17 contributions covering topies of fossil fuel combustion, flue gas cleaning, power plant materials, corrosion, water/steam cycle chemistry, monitoring and control were presented at the annual meeting devoted to Power Plant Chemical Technology 1996 at Kolding (Denmark) 4-6 September 1996. (EG)

  13. NUCLEAR POWER PLANT

    Carter, J.C.; Armstrong, R.H.; Janicke, M.J.

    1963-05-14

    A nuclear power plant for use in an airless environment or other environment in which cooling is difficult is described. The power plant includes a boiling mercury reactor, a mercury--vapor turbine in direct cycle therewith, and a radiator for condensing mercury vapor. (AEC)

  14. The Kuroshio power plant

    Chen, Falin

    2013-01-01

    By outlining a new design or the Kuroshio power plant, new approaches to turbine design, anchorage system planning, deep sea marine engineering and power plant operations and maintenance are explored and suggested. The impact on the local environment, particularly in the face of natural disasters, is also considered to provide a well rounded introduction to plan and build a 30MW pilot power plant. Following a literature review, the six chapters of this book propose a conceptual design by focusing on the plant's core technologies and establish the separate analysis logics for turbine design and

  15. Nuclear power plants

    Margulova, T.Ch.

    1976-01-01

    The textbook focuses on the technology and the operating characteristics of nuclear power plants equiped with pressurized water or boiling water reactors, which are in operation all over the world at present. The following topics are dealt with in relation to the complete plant and to economics: distribution and consumption of electric and thermal energy, types and equipment of nuclear power plants, chemical processes and material balance, economical characteristics concerning heat and energy, regenerative preheating of feed water, degassing and condenser systems, water supply, evaporators, district heating systems, steam generating systems and turbines, coolant loops and pipes, plant siting, ventilation and decontamination systems, reactor operation and management, heat transfer including its calculation, design of reactor buildings, and nuclear power plants with gas or sodium cooled reactors. Numerous technical data of modern Soviet nuclear power plants are included. The book is of interest to graduate and post-graduate students in the field of nuclear engineering as well as to nuclear engineers

  16. Assessment of environmental public exposure from a hypothetical nuclear accident for Unit-1 Bushehr nuclear power plant

    Sohrabi, M.; Ghasemi, M.; Amrollahi, R.; Khamooshi, C.; Parsouzi, Z. [Amirkabir University of Technology, Health Physics and Dosimetry Research Laboratory, Department of Physics, Tehran (Iran, Islamic Republic of)

    2013-05-15

    Unit-1 of the Bushehr nuclear power plant (BNPP-1) is a VVER-type reactor with 1,000-MWe power constructed near Bushehr city at the coast of the Persian Gulf, Iran. The reactor has been recently operational to near its full power. The radiological impact of nuclear power plant (NPP) accidents is of public concern, and the assessment of radiological consequences of any hypothetical nuclear accident on public exposure is vital. The hypothetical accident scenario considered in this paper is a design-basis accident, that is, a primary coolant leakage to the secondary circuit. This scenario was selected in order to compare and verify the results obtained in the present paper with those reported in the Final Safety Analysis Report (FSAR 2007) of the BNPP-1 and to develop a well-proven methodology that can be used to study other and more severe hypothetical accident scenarios for this reactor. In the present study, the version 2.01 of the PC COSYMA code was applied. In the early phase of the accidental releases, effective doses (from external and internal exposures) as well as individual and collective doses (due to the late phase of accidental releases) were evaluated. The surrounding area of the BNPP-1 within a radius of 80 km was subdivided into seven concentric rings and 16 sectors, and distribution of population and agricultural products was calculated for this grid. The results show that during the first year following the modeled hypothetical accident, the effective doses do not exceed the limit of 5 mSv, for the considered distances from the BNPP-1. The results obtained in this study are in good agreement with those in the FSAR-2007 report. The agreement obtained is in light of many inherent uncertainties and variables existing in the two modeling procedures applied and proves that the methodology applied here can also be used to model other severe hypothetical accident scenarios of the BNPP-1 such as a small and large break in the reactor coolant system as well

  17. Plant life extension of nuclear power plants. No thank you? A scientific study on the influence of media and communication on the public opinion concerning nuclear power

    Arlt, Dorothee

    2013-01-01

    The present study examined the influence of the individual use of media on attitudes towards nuclear power with focus in the run-time extension of German nuclear power plants, planned by the German government in the year 2010. The theoretical framework for explaining media effects on attitudes based on opinion research as well as on the second-level agenda setting. This approach assumes that highlighting attributes about attitude objects in the media makes them cognitively more accessible for recipients, so that these attributes are used to evaluate attitude object. In this study, arguments for and against the run-time extension were defined as attributes. For the investigation of individual media effects, this study was carried out in a two-method design to combine survey data and content analysis data on an individual level. From 16.08.2010 to 05.09.2010 the data on attitudes towards the planned run-time extension, nuclear power, energy, policy as well as individual media usage was collected in a representative telephone survey of n=551 people in Thuringia. In a quantitative content analysis the pro and contra arguments about the planned run-time extension in n=480 articles and news items, published during six months before the political decision, were analyzed. The findings of the content analysis showed that the media reported from 08.03.2010 to 05.09.2010 overall positively about the planned run-time extension and that the coverage intensity increased significantly shortly before the political decision. The main focus was on arguments regarding the efficiency and security of supply. By combining the content analysis data with the media usage data, new variables (sum and average value indices) for the specific individual media input of arguments about the run-time extension were formed. With these variables medium- and long-term media effects on attitudes towards nuclear power were tested. The results of the regression analyses showed that the individual media

  18. External Cost Assessment of Nuclear Power Plant Accident considering Public Risk Aversion Behavior: the Korean Case

    Lee, Sang Hun; Kang, Hyun Gook [KAIST, Daejeon (Korea, Republic of)

    2016-05-15

    The conventional approach for monetary valuation of NPP accident consequence consists of calculating the expected value of various accident scenarios. However, the main criticism of the conventional approach is that there is a discrepancy between the social acceptability of the risk and the estimated expected value of NPP accident. Therefore, an integrated framework for the estimation of the external cost associated with an NPP accident considering the public risk aversion behavior was proposed in this study based on the constructed theoretical framework for estimating both the value of statistical life (VSL) and the risk aversion coefficient associated with an NPP accident to take account of the accident cost into the unit electricity generation cost of NPP. To estimate both parameters, an individual-level survey was conducted on a sample of 1,364 participants in Korea. Based on the collected survey responses, both parameters were estimated based on the proposed framework and the external cost of NPP accident was estimated based on the consequence analysis and considering the direct cost factors for NPP accident. Internalization of external costs into the comprehensive energy production cost has been considered as a potentially efficient policy instrument for a more sustainable energy supply and use. However, the internalization of externalities, such as public health damage, have raised a number of generic policy issues in a nuclear energy sector, with specific challenges resulting from the distinct characteristics of external cost estimation. Especially, the major challenge remained to address the public safety concerns regarding a nuclear accident, which can be specified as low-probability high-consequence accident, driven by the aspects of public risk aversion.

  19. External Cost Assessment of Nuclear Power Plant Accident considering Public Risk Aversion Behavior: the Korean Case

    Lee, Sang Hun; Kang, Hyun Gook

    2016-01-01

    The conventional approach for monetary valuation of NPP accident consequence consists of calculating the expected value of various accident scenarios. However, the main criticism of the conventional approach is that there is a discrepancy between the social acceptability of the risk and the estimated expected value of NPP accident. Therefore, an integrated framework for the estimation of the external cost associated with an NPP accident considering the public risk aversion behavior was proposed in this study based on the constructed theoretical framework for estimating both the value of statistical life (VSL) and the risk aversion coefficient associated with an NPP accident to take account of the accident cost into the unit electricity generation cost of NPP. To estimate both parameters, an individual-level survey was conducted on a sample of 1,364 participants in Korea. Based on the collected survey responses, both parameters were estimated based on the proposed framework and the external cost of NPP accident was estimated based on the consequence analysis and considering the direct cost factors for NPP accident. Internalization of external costs into the comprehensive energy production cost has been considered as a potentially efficient policy instrument for a more sustainable energy supply and use. However, the internalization of externalities, such as public health damage, have raised a number of generic policy issues in a nuclear energy sector, with specific challenges resulting from the distinct characteristics of external cost estimation. Especially, the major challenge remained to address the public safety concerns regarding a nuclear accident, which can be specified as low-probability high-consequence accident, driven by the aspects of public risk aversion

  20. Partner of nuclear power plants

    Gribi, M.; Lauer, F.; Pauli, W.; Ruzek, W.

    1992-01-01

    Sulzer, the Swiss technology group, is a supplier of components and systems for nuclear power plants. Important parts of Swiss nuclear power stations, such as containments, reactor pressure vessels, primary pipings, are made in Winterthur. Sulzer Thermtec AG and some divisions of Sulzer Innotec focus their activities on servicing and backfitting nuclear power plants. The European market enjoys priority. New types of valves or systems are developed as economic solutions meeting more stringent criteria imposed by public authorities or arising from operating conditions. (orig.) [de

  1. Safety assessment of proposed modifications of Ignalina nuclear power plant. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

    1995-09-01

    The objective of the meeting was to further discuss previous findings and recommendations and their application to the particular situation of the Ignalina NPP. Since design information and a series of proposed modifications for INPP had been prepared by the main RBMK designer, Research and Development Institute for Power Engineering (RDIPE), it was considered appropriate to conduct the meeting in two parts, the first from 17 to 22 October 1994, at RDIPE headquarters in Moscow and the second from 24 to 28 October 1994, at the plant site in Lithuania. Twelve international experts and IAEA staff participated in the meetings, together with a large group of RDIPE specialists and plant staff. The review covered five topical areas: core monitoring and control; pressure boundary integrity; accident migration; safety and support systems and instrumentation and control. A summary of the reviews in each technical areas is given in this report. Appendices 1 and 5 present the records of the reviews and detailed findings and recommendations in each topical area. The experts strongly supported the effort to develop a new extended safety analysis report. They also stressed the need for close monitoring of the fuel channel conditions and the need for an integrated approach for the upgrading of the control and safety systems. Refs, figs, tabs

  2. Italian steam power plants

    von Rautenkranz, J

    1939-01-01

    A brief history of geothermal power production in Italy is presented. Boric acid has been produced on an industrial scale since 1818. The first electrical power was generated in 1904, and by 1939 the output of geothermal power plants had reached 500 GWh, with major expansion of facilities planned.

  3. Nuclear power plants - Instrumentation and control systems important for safety - Classification (International Electrotechnical Commission Standard Publication 1226:1993)

    Stefanik, J.

    1996-01-01

    This international standard established a method of classification of the information and command functions for nuclear power plants, and the I and C and equipment that provide those functions, into categories that designate the importance for safety of the functions, and the associated systems and equipment. The resulting classification then determines relevant design criteria. The design criteria are the measures of quality by which the adequacy of each functions, and the associated systems and equipment in relation to its importance to plant safety is ensured. In this standard, the criteria are those of functionality, reliability, performance, environmental durability and quality assurance. This standard is applicable to all the information and command functions, and the instrumentation and control systems and equipment that provide those functions. The functions, systems and equipment under consideration provide automated protection, closed or open loop control, and information to the operating staff. They keep the NPP conditions inside the safe operating envelope and provide automatic actions, or enable manual actions, that mitigate accidents or prevent or minimize radioactive releases to the site or wider environment. The functions, and the associated systems and equipment that fulfill these roles safeguard the health and safety of the NPP operators and the public. This standard complements, and does not replace or supersede, the Safety Guides and Codes of Practice published by the International Atomic Energy Agency

  4. Public relations strategy for the completion of Angra 2 nuclear power plant

    Kepinski, Alessandra

    1998-01-01

    In the 60's, the general public in Brazil knew little about nuclear energy. The country was under Military Rule since 1964 and, in the public's ind, the Nuclear Program was closely linked to nuclear weapons, being viewed with distrust and, even, fear. Governmental policies in this field were secret - when the decisions were made to built Angra 1 in 1968 and to sign the Nuclear Cooperation Agreement with Germany in 1975 - the public learned about them as a 'fait accompli'. In the late 70's, people started to hear about the delays in the commissioning of Angra 1 and the problems in the construction of the pile foundations of Angra 2. In 1980, following the TMI accident, the Federal Government issued a set of regulations dealing with emergency planning, the Federal and State Civil Defense being responsible for the preparation of the Off-Site Emergency Plan. FURNAS first public information campaign in 1982 dealt with emergency procedures and was directed to the Angra NPP employees and their families; local residents were visited by Civil Defense officials in 1983. At that time, the Brazilian Nuclear Program began to be criticized by concerned scientists and by the press, primarily due to its lack of transparency and its large scope. Safety issues arising from the TMI accident, lack of decision for the radioactive waste storage and problems with some equipment and components that delayed the commissioning of Angra 1, were pointed out as technical arguments against the construction of Angra 2 and 3. A new Constitution, 1988, required that a nuclear projects must be approved by the National Congress and put forward some new provisions for the environmental licensing of major industrial installations. The completion of Angra 2 was considered of the utmost importance by the Brazilian Nuclear Energy Association - ABEN, which is a technical-scientific body comprising employees from the various organizations that form the Brazilian Nuclear Sector. As an independent, non

  5. Nuclear power plant siting

    Sulkiewicz, M.; Navratil, J.

    The construction of a nuclear power plant is conditioned on territorial requirements and is accompanied by the disturbance of the environment, land occupation, population migration, the emission of radioactive wastes, thermal pollution, etc. On the other hand, a nuclear power plant makes possible the introduction of district heating and increases the economic and civilization activity of the population. Due to the construction of a nuclear power plant the set limits of negative impacts must not be exceeded. The locality should be selected such as to reduce the unfavourable effects of the plant and to fully use its benefits. The decision on the siting of the nuclear power plant is preceded by the processing of a number of surveys and a wide range of documentation to which the given criteria are strictly applied. (B.H.)

  6. Public debate about the EPR nuclear power plant at Flamanville; Debat public sur la centrale nucleaire EPR a Flamanville

    NONE

    2005-07-01

    The project of building of he EPR reactor at Flamanville (Manche, France) has been submitted to the public debate. This document includes a presentation of the project and of the rules of the public debate, a synthesis of the file made by the prime contractor (EDF), a synthesis of the collective book of national actors concerned by the project (a group of associations for environment protection, Areva company, the ministries of economy and ecology, Global Chance, association of pro-nuclear ecologists (AEPN), 'Sortir du Nucleaire' (out-of nuclear) network, group of scientists for the information about nuclear (GSIEN), association for the promotion of the Flamanville site (Proflam), French nuclear energy society (SFEN) in association with 'Sauvons le Climat' (let's save climate), regional collective association 'EPR non merci, ni ailleurs, ni ici' (EPR, no thanks, neither elsewhere, nor here), NegaWatt), and 5 detailed books of actors: ACRO (association for the control of radioactivity in Western France), CFDT and CGT syndicates, the economic and social council of Basse Normandie region, and Proflam. (J.S.)

  7. Public debate about the EPR nuclear power plant at Flamanville; Debat public sur la centrale nucleaire EPR a Flamanville

    NONE

    2005-07-01

    The project of building of he EPR reactor at Flamanville (Manche, France) has been submitted to the public debate. This document includes a presentation of the project and of the rules of the public debate, a synthesis of the file made by the prime contractor (EDF), a synthesis of the collective book of national actors concerned by the project (a group of associations for environment protection, Areva company, the ministries of economy and ecology, Global Chance, association of pro-nuclear ecologists (AEPN), 'Sortir du Nucleaire' (out-of nuclear) network, group of scientists for the information about nuclear (GSIEN), association for the promotion of the Flamanville site (Proflam), French nuclear energy society (SFEN) in association with 'Sauvons le Climat' (let's save climate), regional collective association 'EPR non merci, ni ailleurs, ni ici' (EPR, no thanks, neither elsewhere, nor here), NegaWatt), and 5 detailed books of actors: ACRO (association for the control of radioactivity in Western France), CFDT and CGT syndicates, the economic and social council of Basse Normandie region, and Proflam. (J.S.)

  8. Site selection process for new nuclear power plants - a method to support decision making and improving public participation

    Martins, Vivian B.; Cunha, Tatiana S. da; Simoes Filho, Francisco Fernando Lamego; Lapa, Celso Marcelo F.

    2011-01-01

    The Brazilian Energy Plan (PNE 2030) that guides the Government in formulating its strategy for expanding energy supply by 2030 highlights the need for the Brazilian electrical system have more than 4,000 MW from nuclear sources by 2025. Therefore, the Government presented a proposal to build four more nuclear power plants with capacity of 1,000 MW each, at first, two in the Northeast and two in Southeast. The selection and site assessment are key parts of the installation process of a nuclear plant and may significantly affect the cost, public acceptance and safety of the facility during its entire life cycle. The result of this initial stage, it can even seriously affect program success. Wrong decisions in the process of site selection may also require a financial commitment to higher planned in a later phase of the project, besides causing extensive and expensive downtime. Select the location where these units will be built is not a trivial process, because involves the consideration of multiple criteria and judgments in addition to obtaining, organizing and managing a diverse range of data, both qualitative and quantitative, to assist in decision making and ensure that the site selected is the most appropriate in relation to safety and technical, economic and environmental feasibility. This paper presents an overview of the site selection process and its stages, the criteria involved in each step, the tools to support decision making that can be used and the difficulties in applying a formal process of decision making. Also discussed are ways to make the process more transparent and democratic, increasing public involvement as a way to improve acceptance and reduce opposition from various sectors of society, trying to minimize the expense and time involved in the implementation of undertakings of this kind. (author)

  9. Nuclear power and public health

    1974-01-01

    The nuclear power industry has always emphasized the health and safety aspects of the various stages of power production. Nevertheless, the question of public acceptance is becoming increasingly important in the expansion of nuclear power programmes. Objections may arise partly from the tendency to accept familiar hazards but to react violently to unfamiliar ones such as radiation, which is not obvious to the senses and may result in delayed adverse effects, sometimes manifested only in the descendants of the individuals subjected to the radiation. The public health authorities therefore have an important role in educating the public to overcome these fears. However, they also have the duty to reassure the public and convince it that proper care has been taken to protect man and his environment. This duty can be fulfilled by means of independent evaluation and control to ensure that safe nuclear facilities are built, care is taken with their siting, they are operated safely, and the effects of possible accidents are minimized. The selection and development of a nuclear power facility should be carried out with a sound understanding of the factors involved. WHO has collaborated with the International Atomic Energy Agency (IAEA) in the preparation of a booklet summarizing the available information on the subject. It deals with the role of atomic energy in meeting future power needs, radiation protection standards, the safe handling of radioactive materials, disturbances of the environment arising from plant construction and ancillary operations, and the public health implications

  10. Nuclear power and public health

    NONE

    1974-07-01

    The nuclear power industry has always emphasized the health and safety aspects of the various stages of power production. Nevertheless, the question of public acceptance is becoming increasingly important in the expansion of nuclear power programmes. Objections may arise partly from the tendency to accept familiar hazards but to react violently to unfamiliar ones such as radiation, which is not obvious to the senses and may result in delayed adverse effects, sometimes manifested only in the descendants of the individuals subjected to the radiation. The public health authorities therefore have an important role in educating the public to overcome these fears. However, they also have the duty to reassure the public and convince it that proper care has been taken to protect man and his environment. This duty can be fulfilled by means of independent evaluation and control to ensure that safe nuclear facilities are built, care is taken with their siting, they are operated safely, and the effects of possible accidents are minimized. The selection and development of a nuclear power facility should be carried out with a sound understanding of the factors involved. WHO has collaborated with the International Atomic Energy Agency (IAEA) in the preparation of a booklet summarizing the available information on the subject. It deals with the role of atomic energy in meeting future power needs, radiation protection standards, the safe handling of radioactive materials, disturbances of the environment arising from plant construction and ancillary operations, and the public health implications.

  11. Power plant removal costs

    Ferguson, J.S.

    1998-01-01

    The financial, regulatory and political significance of the estimated high removal costs of nuclear power plants has generated considerable interest in recent years, and the political significance has resulted in the Nuclear Regulatory Commission (NRC) eliminating the use of conventional depreciation accounting for the decontamination portion of the removal (decommissioning). While nuclear plant licensees are not precluded from utilizing conventional depreciation accounting for the demolition of non-radioactive structures and site restoration, state and federal utility regulators have not been favorably inclined to requests for this distinction. The realization that steam-generating units will be more expensive to remove, relative to their original cost, predates the realization that nuclear units will be expensive. However, the nuclear issues have overshadowed this realization, but are unlikely to continue to do so. Numerous utilities have prepared cost estimates for steam generating units, and this presentation discusses the implications of a number of such estimates that are a matter of public record. The estimates cover nearly 400 gas, oil, coal and lignite generating units. The earliest estimate was made in 1978, and for analysis purposes the author has segregated them between gas and oil units, and coal and lignite units

  12. Nuclear power plant construction

    Lima Moreira, Y.M. de.

    1979-01-01

    The legal aspects of nuclear power plant construction in Brazil, derived from governamental political guidelines, are presented. Their evolution, as a consequence of tecnology development is related. (A.L.S.L.) [pt

  13. Nuclear power plant decommissioning

    Yaziz Yunus

    1986-01-01

    A number of issues have to be taken into account before the introduction of any nuclear power plant in any country. These issues include reactor safety (site and operational), waste disposal and, lastly, the decommissioning of the reactor inself. Because of the radioactive nature of the components, nuclear power plants require a different approach to decommission compared to other plants. Until recently, issues on reactor safety and waste disposal were the main topics discussed. As for reactor decommissioning, the debates have been academic until now. Although reactors have operated for 25 years, decommissioning of retired reactors has simply not been fully planned. But the Shippingport Atomic Power Plant in Pennysylvania, the first large scale power reactor to be retired, is now being decommissioned. The work has rekindled the debate in the light of reality. Outside the United States, decommissioning is also being confronted on a new plane. (author)

  14. Advanced stellarator power plants

    Miller, R.L.

    1994-01-01

    The stellarator is a class of helical/toroidal magnetic fusion devices. Recent international progress in stellarator power plant conceptual design is reviewed and comparisons in the areas of physics, engineering, and economics are made with recent tokamak design studies

  15. International power plant business

    Grohe, R.

    1986-03-03

    At the Brown Boveri press seminar 'Energy' in Baden-Baden Rainer Grohe, member of the Brown Boveri board, Mannheim, gave a survey of the activities on the international power plant market in recent years. He showed the vacuities which must be taken into account in this sector today. The drastic escalation of demands on power plant suppliers has lead not to a reduction of protagonists but to an increase. (orig.).

  16. Offshore atomic power plants

    Anon.

    1975-01-01

    Various merits of offshore atomic power plants are illustrated, and their systems are assessed. The planning of the offshore atomic power plants in USA is reviewed, and the construction costs of the offshore plant in Japan were estimated. Air pollution problem may be solved by the offshore atomic power plants remarkably. Deep water at low temperature may be advantageously used as cooling water for condensers. Marine resources may be bred by building artificial habitats and by providing spring-up equipments. In the case of floating plants, the plant design can be standardized so that the construction costs may be reduced. The offshore plants can be classified into three systems, namely artificial island system, floating system and sea bottom-based system. The island system may be realized with the present level of civil engineering, but requires the development of technology for the resistance of base against earthquake and its calculation means. The floating system may be constructed with conventional power plant engineering and shipbuilding engineering, but the aseismatic stability of breakwater may be a problem to be solved. Deep water floating system and deep water submerging system are conceivable, but its realization may be difficult. The sea bottom-based system with large caissons can be realized by the present civil engineering, but the construction of the caissons, stability against earthquake and resistance to waves may be problems to be solved. The technical prediction and assessment of new plant sites for nuclear power plants have been reported by Science and Technology Agency in 1974. The construction costs of an offshore plant has been estimated by the Ministry of International Trade and Industry to be yen71,026/kW as of 1985. (Iwakiri, K.)

  17. Power plants 2010. Lectures

    2010-01-01

    The proceedings include the following lectures: Facing the challenges - new structures for electricity production. Renewable energies in Europe - chances and challenges. Nuclear outlook in the UK. Sustainable energy for Europe. Requirements of the market and the grid operator at the electricity production companies. Perspectives for the future energy production. Pumped storage plants - status and perspectives. Nuclear power/renewable energies -partners or opponents? New fossil fired power stations in Europe - status and perspectives. Nuclear energy: outlook for new build and lifetime extension in Europe. Biomass in the future European energy market - experiences for dong energy. Meeting the EU 20:20 renewable energy targets: the offshore challenges. DESERTEC: sustainable electricity for Europe, Middle East and North Africa. New power plants in Europe - a challenge for project and quality management. Consideration of safely in new build activities of power plants. Challenges to an integrated development in Maasvlakte, Netherlands. Power enhancement in EnBW power plants. Operational experiences of CCS pilot plants worldwide. Two years of operational experiences with Vattenfall's oxyfuel pilot plant. Pre-conditions for CCS. Storage technologies for a volatile generation. Overview: new generation of gas turbines.

  18. Nuclear power publications

    1982-01-01

    This booklet lists 69 publications on nuclear energy available free from some of the main organisations concerned with its development and operation in the UK. Headings are: general information; the need for nuclear energy; the nuclear industry; nuclear power stations; fuel cycle; safety; waste management. (U.K.)

  19. Nuclear power and public opinion

    1984-01-01

    The diversity of factors involved in nuclear power development and the complexity of public attitudes towards this source of energy have raised the nuclear debate to a topic of national significance in all the OECD countries with nuclear programmes and even in some countries which have not embarked on the nuclear course. This study examines the different experiences of seventeen member countries and underlines basic approaches and practices aimed at winning greater public acceptance for nuclear power. The first part of the study is a country-by-country presentation of public acceptance activities and the role of the various public or private bodies involved. There is also a description of the background energy situation and the place of nuclear power, the evolution of the nuclear debate and a review of present public and political attitudes to nuclear energy. In the second part, some of the notable factors which determine public attitudes to, and perception of, nuclear energy have been assembled. The study points, in particular, to a number of general principles which require continuous implementation, not least because they contribute to placing nuclear energy in its proper context for the public. Vigorous government leadership in making energy choices, long term efforts in energy education, and open information policies can go a long way towards resolving many doubts about nuclear energy in the public mind. But, perhaps, above all, it is the continuing demonstration of the safe and efficient industrial operation of plants in the nuclear fuel cycle which will have the strongest influence on public opinion. In addition to these basic principles, the study calls attention to some of the most successful means of improving communication between the authorities and the public, notably at the local level. The contribution to the decision-making process of public participation is also evaluated in the light of recent national experiences.

  20. Nuclear power and public opinion

    1984-01-01

    The diversity of factors involved in nuclear power development and the complexity of public attitudes towards this source of energy have raised the nuclear debate to a topic of national significance in all the OECD countries with nuclear programmes and even in some countries which have not embarked on the nuclear course. This study examines the different experiences of seventeen member countries and underlines basic approaches and practices aimed at winning greater public acceptance for nuclear power. The first part of the study is a country-by-country presentation of public acceptance activities and the role of the various public or private bodies involved. There is also a description of the background energy situation and the place of nuclear power, the evolution of the nuclear debate and a review of present public and political attitudes to nuclear energy. In the second part, some of the notable factors which determine public attitudes to, and perception of, nuclear energy have been assembled. The study points, in particular, to a number of general principles which require continuous implementation, not least because they contribute to placing nuclear energy in its proper context for the public. Vigorous government leadership in making energy choices, long term efforts in energy education, and open information policies can go a long way towards resolving many doubts about nuclear energy in the public mind. But, perhaps, above all, it is the continuing demonstration of the safe and efficient industrial operation of plants in the nuclear fuel cycle which will have the strongest influence on public opinion. In addition to these basic principles, the study calls attention to some of the most successful means of improving communication between the authorities and the public, notably at the local level. The contribution to the decision-making process of public participation is also evaluated in the light of recent national experiences

  1. Environmental survey around EDF nuclear power plants

    Foulquier, L.

    1992-01-01

    Description of various types of environmental test carried out under the responsibility of the Operator of nuclear power plants in France, with taking Fessenheim nuclear power plant as an example: permanent monitoring of radioactivity, periodic radioecological assessments, main results of measurements taken, showing that there are no detectable effects of the plant on the environment, policy of openness by publication of these results

  2. Power plant at sea

    Roggen, M.

    2000-01-01

    Drilling platforms are rather inefficient when it comes to their own power supply. In view of ecotax and their environmental image, the offshore industry particularly the Norwegians is highly committed to changing this situation. An efficient power plant, specially designed for the offshore industry, might just prove to be the answer to their prayers

  3. Nuclear power plants maintenance

    Anon.

    1988-01-01

    Nuclear power plants maintenance now appears as an important factor contributing to the competitivity of nuclea energy. The articles published in this issue describe the way maintenance has been organized in France and how it led to an actual industrial activity developing and providing products and services. An information note about Georges Besse uranium enrichment plant (Eurodif) recalls that maintenance has become a main data not only for power plants but for all nuclear industry installations. (The second part of this dossier will be published in the next issue: vol. 1 January-February 1989) [fr

  4. Nuclear power plant outages

    1998-01-01

    The Finnish Radiation and Nuclear Safety Authority (STUK) controls nuclear power plant safety in Finland. In addition to controlling the design, construction and operation of nuclear power plants, STUK also controls refuelling and repair outages at the plants. According to section 9 of the Nuclear Energy Act (990/87), it shall be the licence-holder's obligation to ensure the safety of the use of nuclear energy. Requirements applicable to the licence-holder as regards the assurance of outage safety are presented in this guide. STUK's regulatory control activities pertaining to outages are also described

  5. VGB congress 'Power Plants 2009'

    Anon.

    2009-01-01

    The VGB Congress 'Power Plants 2009' took place in Lyon/France from 23rd to 25th September 2009 and was themed 'Addressing Climate Change - Winning Public Acceptance through Advanced Technologies'. Nearly 1,300 participants attended the plenary and technical lectures and had the opportunity to discus the current topics of electricity and heat generation. The study carried out by VGB according to which EU-27 requires about 475.000 MW of new power plant capacity was also presented. Specific papers were addressing further topics. The Congress was rounded off by a side-programme and technical visits. (orig.)

  6. Nuclear Power Plants (Rev.)

    Lyerly, Ray L.; Mitchell III, Walter [Southern Nuclear Engineering, Inc.

    1973-01-01

    Projected energy requirements for the future suggest that we must employ atomic energy to generate electric power or face depletion of our fossil-fuel resources—coal, oil, and gas. In short, both conservation and economic considerations will require us to use nuclear energy to generate the electricity that supports our civilization. Until we reach the time when nuclear power plants are as common as fossil-fueled or hydroelectric plants, many people will wonder how the nuclear plants work, how much they cost, where they are located, and what kinds of reactors they use. The purpose of this booklet is to answer these questions. In doing so, it will consider only central station plants, which are those that provide electric power for established utility systems.

  7. Slovak Electric, plc, Bohunice Nuclear Power Plant

    1999-01-01

    A brief account of activities carried out by the Bohunice Nuclear Power Plant in 1998 is presented. These activities are reported under the headings: (1) Operation and electric power generation; (2) Nuclear and radiation safety; (3) Maintenance and scheduled refuelling out-gages; (4) Investment and WWER units upgrading; (5) Power Plants Personnel; (6) Public relations

  8. Human reliability analysis in probabilistic safety assessment for nuclear power plants. A Safety Practice. A publication within the NUSS programme

    1995-01-01

    Probabilistic safety assessment (PSA) is playing an increasingly important role in the safe operation of nuclear power plants throughout the world. In order to establish a consistent framework for conducting PSA studies, for promoting technology transfer of the state of the art, and for encouraging uniformity in the way PSA is carried out, the IAEA is preparing a set of publications which gives guidance on various aspects of PSA. This document presents a practical approach for incorporating human reliability analysis (HRA) into PSA. It describes the steps needed and the documentation that should be provided both to support the PSA itself and to ensure effective communication of important information arising from the studies. It also describes a framework for analysing those human actions which could affect safety and for relating such human influences to specific parts of a PSA. This Safety Practice also addresses the limitations of PSA in taking account of human factors in relation to safety and risk. Refs, figs and tabs

  9. The economic, environmental and public health impacts of new power plants: a sequential inter industry model integrated with GIS data

    Avelino, Andre F.T.; Hewings, Geoffrey J.D.; Guilhoto, Joaquim J.M. [Universidade de Sao Paulo (FEA/USP), SE (Brazil). Fac. de Administracao e Contabilidade

    2010-07-01

    The electrical sector is responsible for a considerable amount of greenhouse gases emissions worldwide, but also the one in which modern society depends the most for maintenance of quality of life as well as the functioning of economic and social activities. Invariably, even CO2 emission-free power plants have some indirect environmental impacts due to the economic effects they produce during their life cycle (construction, O and M and decommissioning). Thus, sustainability issues should be always considered in energy planning, by evaluating the balance of positive/negative externalities on different areas of the country. This study aims to introduce a social-environmental economic model, based on a Regional Sequential Inter industry Model (SIM) integrated with geoprocessing data, in order to identify economic, pollution and public health impacts in state level for energy planning analysis. The model is based on the Impact Pathway Approach Methodology, using geoprocessing to locate social-environmental variables for dispersion and health evaluations. The final goal is to provide an auxiliary tool for policy makers to assess energy planning scenarios in Brazil. (author)

  10. LNG plant combined with power plant

    Aoki, I; Kikkawa, Y [Chiyoda Chemical Engineering and Construction Co. Ltd., Tokyo (Japan)

    1997-06-01

    The LNG plant consumers a lot of power of natural gas cooling and liquefaction. In some LNG plant location, a rapid growth of electric power demand is expected due to the modernization of area and/or the country. The electric power demand will have a peak in day time and low consumption in night time, while the power demand of the LNG plant is almost constant due to its nature. Combining the LNG plant with power plant will contribute an improvement the thermal efficiency of the power plant by keeping higher average load of the power plant, which will lead to a reduction of electrical power generation cost. The sweet fuel gas to the power plant can be extracted from the LNG plant, which will be favorable from view point of clean air of the area. (Author). 5 figs.

  11. LNG plant combined with power plant

    Aoki, I.; Kikkawa, Y.

    1997-01-01

    The LNG plant consumers a lot of power of natural gas cooling and liquefaction. In some LNG plant location, a rapid growth of electric power demand is expected due to the modernization of area and/or the country. The electric power demand will have a peak in day time and low consumption in night time, while the power demand of the LNG plant is almost constant due to its nature. Combining the LNG plant with power plant will contribute an improvement the thermal efficiency of the power plant by keeping higher average load of the power plant, which will lead to a reduction of electrical power generation cost. The sweet fuel gas to the power plant can be extracted from the LNG plant, which will be favorable from view point of clean air of the area. (Author). 5 figs

  12. Circular of 24 August 1976 on the organisation of the prior enquiry procedure for official recognition of conventional thermal power plants and nuclear power plants as being in the public interest

    1976-01-01

    The Minister of Industry and Research published a Circular dated 24th August 1976 on the organisation of the prior enquiry procedure for official recognition of conventional thermal power plants and nuclear power plants as being in the public interest. Publication of this Circular meets the emerging requirement to submit the siting of nuclear installations to a procedure of consultation and communication of detailed information at the central, as well as at the level of the regional authorities. It supplements, in respect of nuclear installations, the provisions organising the conduct of the public enquiry in the Decree of 6th June 1959, amended by a Decree of 14th May 1976. During the stage prior to the enquiry proper, the application for official recognition of a project as being in the public interest must contain the following: a document on the architectural aspect of the planned installation, an environmental impact study, the main provisions on nuclear safety and radiation protection. This Circular repeals and supersedes the Ministerial Circular of 29th October 1959. (N.E.A.) [fr

  13. Publication of the planned erection and operation of a nuclear power plant near the town of Lingen, Emsland

    Anon.

    1979-01-01

    The nuclear power plant site is planned in the south Lingen industrial park in field 5 of the Darme district and in fields 34 and 35 of the Bramsche district, about 0.6 km nortn-east of the section between kilometers 139 and 140 of the Dortmund-Ems canal which shares the river bed of the Ems in this section. The nuclear power plant will have a PWR with a thermal power of 3765 MW, i.e. an electrical gross power of 1291 MWe during normal operation under design conditions. Heat removal from the turbine condenser will take place in closed recirculation cooling operation via a natural-draught cooling tower. (orig.) [de

  14. Dispatchable Solar Power Plant Project

    Price, Henry [Solar Dynamics LLC, Broomfield, CO (United States)

    2018-01-31

    As penetration of intermittent renewable power increases, grid operators must manage greater variability in the supply and demand on the grid. One result is that utilities are planning to build many new natural gas peaking power plants that provide added flexibility needed for grid management. This report discusses the development of a dispatchable solar power (DSP) plant that can be used in place of natural gas peakers. Specifically, a new molten-salt tower (MST) plant has been developed that is designed to allow much more flexible operation than typically considered in concentrating solar power plants. As a result, this plant can provide most of the capacity and ancillary benefits of a conventional natural gas peaker plant but without the carbon emissions. The DSP system presented was designed to meet the specific needs of the Arizona Public Service (APS) utility 2017 peaking capacity request for proposals (RFP). The goal of the effort was to design a MST peaker plant that had the operational capabilities required to meet the peaking requirements of the utility and be cost competitive with the natural gas alternative. The effort also addresses many perceived barriers facing the commercial deployment of MST technology in the US today. These include MST project development issues such as permitting, avian impacts, visual impacts of tower CSP projects, project schedule, and water consumption. The DSP plant design is based on considerable analyses using sophisticated solar system design tools and in-depth preliminary engineering design. The resulting DSP plant design uses a 250 MW steam power cycle, with solar field designed to fit on a square mile plot of land that has a design point thermal rating of 400 MWt. The DSP plant has an annual capacity factor of about 16% tailored to deliver greater than 90% capacity during the critical Arizona summer afternoon peak. The table below compares the All-In energy cost and capacity payment of conventional combustion turbines

  15. Wind power plant

    Caneghem, A.E. von

    1975-07-24

    The invention applies to a wind power plant in which the wind is used to drive windmills. The plant consists basically of a vertical tube with a lateral wind entrance opening with windmill on its lower end. On its upper end, the tube carries a nozzle-like top which increases the wind entering the tube by pressure decrease. The wind is thus made suitable for higher outputs. The invention is illustrated by constructional examples.

  16. Benchmarking Nuclear Power Plants

    Jakic, I.

    2016-01-01

    One of the main tasks an owner have is to keep its business competitive on the market while delivering its product. Being owner of nuclear power plant bear the same (or even more complex and stern) responsibility due to safety risks and costs. In the past, nuclear power plant managements could (partly) ignore profit or it was simply expected and to some degree assured through the various regulatory processes governing electricity rate design. It is obvious now that, with the deregulation, utility privatization and competitive electricity market, key measure of success used at nuclear power plants must include traditional metrics of successful business (return on investment, earnings and revenue generation) as well as those of plant performance, safety and reliability. In order to analyze business performance of (specific) nuclear power plant, benchmarking, as one of the well-established concept and usual method was used. Domain was conservatively designed, with well-adjusted framework, but results have still limited application due to many differences, gaps and uncertainties. (author).

  17. Public acceptance of nuclear power in Taiwan

    Liao, T.T.L.

    1992-01-01

    It is necessary to reach the public acceptance for nuclear power development program. During the process of the application for the approval from the government to implement the Fourth Nuclear Power Plant program in Taiwan, we initialized a series of communication program in the last two years and are expecting to convince the public that to develops nuclear power is essential to the country from a viewpoint of energy diversified. The basic strategies of the communication program not only emphasized the new nuclear power project, but also for the long term public acceptance on nuclear power. The strategies include: (1) Preview and implement the promotion program for the performance of the existing nuclear power plants. (2) Designate and communicate with the major communication target groups: elected delegates, journalists, local residents, scholars and experts. (3) Edit and incorporate the basic nuclear knowledge into the preliminary school educational materials. (4) Subsidize the adjacent communities of nuclear power plants for the public well-being construction. In order to implement the mentioned strategies, Taipower has reorganized the public service department and the existing nuclear power plants, setup the nuclear exhibition center, conducted fullscale emergency drill biannually for each of nuclear power plant, and prepared the seminars for the teacher

  18. Wind power plant

    Kling, A

    1977-01-13

    The wind power plant described has at least one rotor which is coupled to an electricity generator. The systems are fixed to a suspended body so that it is possible to set up the wind power plant at greater height where one can expect stronger and more uniform winds. The anchoring on the ground or on a floating body is done by mooring cables which can simultaneously have the function of an electric cable. The whole system can be steered by fins. The rotor system itself consists of at least one pair of contrarotating, momentum balanced rotors.

  19. Ardennes nuclear power plant

    1974-12-01

    The SENA nuclear power plant continued to operate, as before, at authorized rated power, namely 905MWth during the first half year and 950MWth during the second half year. Net energy production:2028GWh; hours phased to the line: 7534H; availability factor: 84%; utilization factor: 84%; total shutdowns:19; number of scrams:10; cost per KWh: 4,35 French centimes. Overall, the plant is performing very satisfactory. Over the last three years net production has been 5900GWh, corresponding to in average utilization factor of 83%

  20. Nuclear power plant

    Orlov, V.V.; Rineisky, A.A.

    1975-01-01

    The invention is aimed at designing a nuclear power plant with a heat transfer system which permits an accelerated fuel regeneration maintaining relatively high initial steam values and efficiency of the steam power circuit. In case of a plant with three circuits the secondary cooling circuit includes a steam generator with preheater, evaporator, steam superheater and intermediate steam superheater. At the heat supply side the latter is connected with its inlet to the outlet of the evaporator and with its outlet to the low-temperature side of the secondary circuit

  1. TAPCHAN Wave Power Plants

    1983-10-01

    The Tapered Channel Wave Power Plant (TAPCHAN) is based on a new method for wave energy conversion. The principle of operation can be explained by dividing the system into the following four sub-systems: Firstly, a collector which is designed to concentrate the water energy and optimize collection efficiency for a range of frequencies and directions. Secondly, the energy converter, in which the energy of the collected waves is transformed into potential energy in an on-shore water reservoir. This is the unique part of the power plant. It consists of a gradually narrowing channel with wall heights equal to the filling level of the reservoir (typical heights 3-7 m). The waves enter the wide end of the channel and as they propagate down the narrowing channel, the wave height is amplified until the wavecrests spill over the walls. Thirdly, a reservoir which provides a stable water supply for the turbines. Finally, the hydroelectric power plant, where well established techniques are used for the generation of electric power. The water turbine driving the electric generator is of a low head type, such as a Kaplan or a tubular turbine. It must be designed for salt water operation and should have good regulation capabilities. Power plants based on the principle described, are now offered on a commercial basis.

  2. Public enlightment seminar on nuclear power. Proceedings

    Yildirim, N

    1998-12-31

    The seminar considered different aspects of nuclear power development, including the following issues: electricity generation, power supply and demand, energy sources, consumption of electricity, energy outlook in Europe, comparative analysis of energy options, safety of modern nuclear power plants, radiation and human health, radioactive waste management, nuclear techniques to promote world food security, public information issues.

  3. Public enlightment seminar on nuclear power. Proceedings

    Yildirim, N.

    1997-01-01

    The seminar considered different aspects of nuclear power development, including the following issues: electricity generation, power supply and demand, energy sources, consumption of electricity, energy outlook in Europe, comparative analysis of energy options, safety of modern nuclear power plants, radiation and human health, radioactive waste management, nuclear techniques to promote world food security, public information issues

  4. Development of Molten-Salt Heat Transfer Fluid Technology for Parabolic Trough Solar Power Plants - Public Final Technical Report

    Grogan, Dylan C. P.

    2013-08-15

    Executive Summary This Final Report for the "Development of Molten-Salt Heat Transfer Fluid (HTF) Technology for Parabolic Trough Solar Power Plants” describes the overall project accomplishments, results and conclusions. Phase 1 analyzed the feasibility, cost and performance of a parabolic trough solar power plant with a molten salt heat transfer fluid (HTF); researched and/or developed feasible component options, detailed cost estimates and workable operating procedures; and developed hourly performance models. As a result, a molten salt plant with 6 hours of storage was shown to reduce Thermal Energy Storage (TES) cost by 43.2%, solar field cost by 14.8%, and levelized cost of energy (LCOE) by 9.8% - 14.5% relative to a similar state-of-the-art baseline plant. The LCOE savings range met the project’s Go/No Go criteria of 10% LCOE reduction. Another primary focus of Phase 1 and 2 was risk mitigation. The large risk areas associated with a molten salt parabolic trough plant were addressed in both Phases, such as; HTF freeze prevention and recovery, collector components and piping connections, and complex component interactions. Phase 2 analyzed in more detail the technical and economic feasibility of a 140 MWe,gross molten-salt CSP plant with 6 hours of TES. Phase 2 accomplishments included developing technical solutions to the above mentioned risk areas, such as freeze protection/recovery, corrosion effects of applicable molten salts, collector design improvements for molten salt, and developing plant operating strategies for maximized plant performance and freeze risk mitigation. Phase 2 accomplishments also included developing and thoroughly analyzing a molten salt, Parabolic Trough power plant performance model, in order to achieve the project cost and performance targets. The plant performance model and an extensive basic Engineering, Procurement, and Construction (EPC) quote were used to calculate a real levelized cost of energy (LCOE) of 11.50

  5. Off-site intervention plan of the public health authorities for emergencies at the Caorso nuclear power plant

    Fabbri, S.; Sogni, R.; Boeri, G.; Cencetti, S.; Melandri, G.; Paterlini, L.

    1986-01-01

    The Caorso nuclear power plant, which is near Piacenza and has an 875 MW boiling water reactor, has been generating electricity on a regular basis since 1978. The off-site intervention plan of the public health authorities, based on an analysis of hypothetical accidents, was approved in 1977 and subsequently revised. A study of the radiological consequences of these accidents for man and the environment indicates that the highest doses likely to be received by inhalation of 131 I would be no more than a few rem, whereas the levels of soil contamination, even at a distance of 40 km, could exceed 1 μCi/m 2 . The main problems caused by such accidents are therefore related to environmental contamination. Under the intervention plan, the provincial prefect is responsible for co-ordinating the work of all the civil, military and medical authorities. Teams from ENEL, the fire service and the local health services (USL) monitor the concentration of 131 I in the air and the exposure level, and take samples within a radius of 10 km around the site. The police and army control road traffic and are responsible, if necessary, for the evacuation of the population. A radiometry co-ordination centre (CCRI) is set up to process the readings made by the teams and provides the prefect with the technical information he requires to take decisions The local medical services (USL) run the centre where the population is assembled and monitor superficial contamination, apply initial decontamination measures, and provide medical assistance in general. The Piacenza USL also takes action by sending out its mobile radiometry laboratory, using its measurement equipment and providing logistic support to the CCRI. It is also to play a major role in informing the population in the event of an alarm. (author)

  6. Nuclear power and the public

    Kovacs, P.; Gordelier, S.

    2009-01-01

    Issues such as climate change, energy security and the longer-term availability of fossil fuels are causing many governments to reconsider their national energy policies. Promotion of renewable energy sources is often a first policy response but, increasingly, it is being recognised that renewable sources may only provide a partial solution, especially in countries where heavy industry or large cities make intense demands on electricity supply. Governments are coming to recognize nuclear power as an attractive option because of its near absence of carbon dioxide emissions and the widespread availability of uranium which serves as fuel. Furthermore, the major uranium producers Canada and Australia are noted for their long term stability and good governance. The difficulty, of course, is that concerns over the safety and security of nuclear power often make it unpopular among the public. Hence, whether governments propose to introduce nuclear power for the first time, to simply replace existing ageing plant or to expand generating capacity, public acceptability questions must be faced. The apparent intractability of this issue has given rise to innumerable studies of public attitudes to nuclear power. The NEA has recently completed a review of this information what might be called a poll of polls. Particularly useful sources of information are surveys conducted for the European Commission (the Eurobarometer series) and the International Atomic Energy Agency (IAEA) between 2005 and 2007. Together, these provide in-depth information that helps to explain country-to-country differences and people's underlying reasons for supporting or opposing nuclear generated electricity. (author)

  7. Geothermal Power Generation Plant

    Boyd, Tonya [Oregon Inst. of Technology, Klamath Falls, OR (United States). Geo-Heat Center

    2013-12-01

    Oregon Institute of Technology (OIT) drilled a deep geothermal well on campus (to 5,300 feet deep) which produced 196°F resource as part of the 2008 OIT Congressionally Directed Project. OIT will construct a geothermal power plant (estimated at 1.75 MWe gross output). The plant would provide 50 to 75 percent of the electricity demand on campus. Technical support for construction and operations will be provided by OIT’s Geo-Heat Center. The power plant will be housed adjacent to the existing heat exchange building on the south east corner of campus near the existing geothermal production wells used for heating campus. Cooling water will be supplied from the nearby cold water wells to a cooling tower or air cooling may be used, depending upon the type of plant selected. Using the flow obtained from the deep well, not only can energy be generated from the power plant, but the “waste” water will also be used to supplement space heating on campus. A pipeline will be construction from the well to the heat exchanger building, and then a discharge line will be construction around the east and north side of campus for anticipated use of the “waste” water by facilities in an adjacent sustainable energy park. An injection well will need to be drilled to handle the flow, as the campus existing injection wells are limited in capacity.

  8. Nuclear power plant analyzer

    Stritar, A.

    1986-01-01

    The development of Nuclear Power Plant Analyzers in USA is described. There are two different types of Analyzers under development in USA, the forst in Idaho and Los Alamos national Lab, the second in brookhaven National lab. That one is described in detail. The computer hardware and the mathematical models of the reactor vessel thermalhydraulics are described. (author)

  9. Nuclear power plant

    Wieser, R.

    1979-01-01

    The reactor pressure vessel consists of two parts. A cylindrical lower part with a hemispherical steel roof is placed at some distance within an equally shaped pressure vessel of concrete. Both vessels are standing on a common bottom plate. The interspace is kept at subpressure. It serves to contain ring galleries, elevator shafts, and power plant components. (GL) [de

  10. Nuclear Power Plant Technician

    Randall, George A.

    1975-01-01

    The author recognizes a body of basic knowledge in nuclear power plant technoogy that can be taught in school programs, and lists the various courses, aiming to fill the anticipated need for nuclear-trained manpower--persons holding an associate degree in engineering technology. (Author/BP)

  11. Steam power plant

    Campbell, J.W.E.

    1981-01-01

    This invention relates to power plant forced flow boilers operating with water letdown. The letdown water is arranged to deliver heat to partly expanded steam passing through a steam reheater connected between two stages of the prime mover. (U.K.)

  12. Power plants 2009. Lectures

    2009-01-01

    Within the Annual Conference 2009 of the VGB PowerTech e.V. (Essen, Federal Republic of Germany) from 23rd to 25th May, 2009, in Lyon (France) the following lectures were held: (1) Electricity demand, consequences of the financial and economic crisis - Current overview 2020 for the EU-27 (Hans ten Berge); (2) Status and perspectives of the electricity generation mix in France (Bernard Dupraz); (3) European electricity grid - status and perspective (Dominique Maillard); (4) Technologies and acceptance in the European energy market (Gordon MacKerran); (5) EPR construction in Finland, China, France, (Claude Jaouen); (6) EPR Flamanville 3: A project on the path towards nuclear revival (Jacques Alary); (7) Worldwide nuclear Revival and acceptance (Luc Geraets); (8) An overview on the status of final disposal of radioactive wastes worldwide (Piet Zuidema); (9) Who needs pumped storage plants? PSP are partner to grid stability and renewable energies (Hans-Christoph Funke); (10) Sustainable use of water resources to generate electricity safely and efficiently (Patrick Tourasse); (11) The growth strategy of RWE Innogy - Role of RES in RWE strategy (Fritz Vahrenholt); (12) Solar technologies towards grid parity - key factors and timeframe (G. Gigliucci); (13) Overview on CCS technologies and results of Vattenfalls oxyfuel pilot plant (Philippe Paelinck); (14) Development perspectives of lignite-based IGCC-plants with CCS (Dietmar Keller); (15) Post combustion capture plants - concept and plant integration (Wolfgang Schreier); (16) CCS fossil power generation in a carbon constraint world (Daniel Hofmann); (17) CEZ group strategy in Central and South Eastern Europe (Jan Zizka); (18) Strategy and projects of DONG Energy (Jens Erik Pedersen); (19) E.ON coal-based power generation of the future - The highly efficient power plant and downstream separation of carbon dioxide (Gerhard Seibel); (20) Final sage of first supercritical 460 MW e l. CFB Boiler construction - firs

  13. Beloyarsk Nuclear Power Plant

    1997-01-01

    The Beloyarsk Nuclear Power Plant (BNPP) is located in Zarechny, approximately 60 km east of Ekaterinberg along the Trans-Siberian Highway. Zarechny, a small city of approximately 30,000 residents, was built to support BNPP operations. It is a closed city to unescorted visitors. Residents must show identification for entry. BNPP is one of the first and oldest commercial nuclear power plants in Russia and began operations in 1964. As for most nuclear power plants in the Russian Federation, BNPP is operated by Rosenergoatom, which is subordinated to the Ministry of Atomic Energy of the Russian Federation (Minatom). BNPP is the site of three nuclear reactors, Units 1, 2, and 3. Units 1 and 2, which have been shut-down and defueled, were graphite moderated reactors. The units were shut-down in 1981 and 1989. Unit 3, a BN-600 reactor, is a 600 MW(electric) sodium-cooled fast breeder reactor. Unit 3 went on-line in April 1980 and produces electric power which is fed into a distribution grid and thermal power which provides heat to Zarechny. The paper also discusses the SF NIKIET, the Sverdiovsk Branch of NIKIET, Moscow, which is the research and development branch of the parent NIKEIT and is primarily a design institute responsible for reactor design. Central to its operations is a 15 megawatt IVV research reactor. The paper discusses general security and fissile material control and accountability at these two facilities

  14. Nuclear power plants of the nineties

    Weyermann, P.

    1989-01-01

    Nuclear power plants which will be available in the second half of the nineties are introduced. The demands which utilities must put on such a power plant that it covers their needs and meets the necessary acceptance of the public are presented. 8 figs

  15. Inspection and enforcement by the regulatory body for nuclear power plants. A safety guide. A publication within the NUSS programme

    1996-01-01

    The purpose of this Safety Guide is to provide guidance on fulfilling the requirements for inspection and enforcement by the regulatory body, as set out in the Code on the Safety of Nuclear Power Plants; Governmental Organization. This Safety Guide deals with the responsibilities of the regulatory body, the organization of inspection programmes, the inspection resources of the regulatory body, methods of inspection, requirements on the applicant/licensee in regard to regulatory inspection, inspection reports, and regulatory action and enforcement. It is recognized that many of the provisions of this Safety Guide may be applicable to the regulations of other nuclear facilities and related activities including research reactors, fuel processing and manufacturing plants, irradiated fuel processing plants and radioactive waste management facilities. This Safety Guide does not deal specifically with the functions of a regulatory body responsible for such matters; however, the guidance presented here may be applied as appropriate to these activities. 11 refs, 1 fig

  16. Latina nuclear power plant

    1976-03-01

    In the period under review, the Latina power plant produced 1009,07 million kWh with a utilization factor of 72% and an availability factor of 80,51%. The disparity between the utilization and availability factors was mainly due to the shutdown of the plant owing to trade union strife. The reasons for non-availability (19,49%) were almost all related to the functioning of the conventional part and the general servicing of the plant (18 September-28 October). During the shutdown for maintenance, an inspection of the steel members and parts of the core stabilizing structure was made in order to check for the familiar oxidation phenomena caused by CO 2 ; the results of the inspection were all satisfactory. Operation of the plant during 1974 was marked by numerous power cutbacks as a result of outages of the steam-raising units (leaks from the manifolds) and main turbines (inspection and repairs to the LP rotors). Since it was first brought into commercial operation, the plant has produced 13,4 thousand million kWh

  17. Wind power plant

    Weiss, G

    1975-11-20

    A wind power plant is proposed suitable for electicity generation or water pumping. This plant is to be self-adjusting to various wind velocities and to be kept in operation even during violent storms. For this purpose the mast, carrying the wind rotor and pivotable around a horizontal axis is tiltable and equipped with a wind blind. Further claims contain various configurations of the tilting base resp. the cut in of an elastic link, the attachment and design of the wind blind as well as the constructive arrangement of one or more dynamos.

  18. Power plant process computer

    Koch, R.

    1982-01-01

    The concept of instrumentation and control in nuclear power plants incorporates the use of process computers for tasks which are on-line in respect to real-time requirements but not closed-loop in respect to closed-loop control. The general scope of tasks is: - alarm annunciation on CRT's - data logging - data recording for post trip reviews and plant behaviour analysis - nuclear data computation - graphic displays. Process computers are used additionally for dedicated tasks such as the aeroball measuring system, the turbine stress evaluator. Further applications are personal dose supervision and access monitoring. (orig.)

  19. Fossil power plant automation

    Divakaruni, S.M.; Touchton, G.

    1991-01-01

    This paper elaborates on issues facing the utilities industry and seeks to address how new computer-based control and automation technologies resulting from recent microprocessor evolution, can improve fossil plant operations and maintenance. This in turn can assist utilities to emerge stronger from the challenges ahead. Many presentations at the first ISA/EPRI co-sponsored conference are targeted towards improving the use of computer and control systems in the fossil and nuclear power plants and we believe this to be the right forum to share our ideas

  20. Virtual power plant auctions

    Ausubel, Lawrence M.; Cramton, Peter

    2010-01-01

    Since their advent in 2001, virtual power plant (VPP) auctions have been implemented widely. In this paper, we describe the simultaneous ascending-clock auction format that has been used for virtually all VPP auctions to date, elaborating on other design choices that most VPP auctions have had in common as well as discussing a few aspects that have varied significantly among VPP auctions. We then evaluate the various objectives of regulators in requiring VPP auctions, concluding that the auctions have been effective devices for facilitating new entry into electricity markets and for developing wholesale power markets. (author)

  1. Virtual power plant auctions

    Ausubel, Lawrence M.; Cramton, Peter [Department of Economics, University of Maryland, College Park, MD 20742 (United States)

    2010-12-15

    Since their advent in 2001, virtual power plant (VPP) auctions have been implemented widely. In this paper, we describe the simultaneous ascending-clock auction format that has been used for virtually all VPP auctions to date, elaborating on other design choices that most VPP auctions have had in common as well as discussing a few aspects that have varied significantly among VPP auctions. We then evaluate the various objectives of regulators in requiring VPP auctions, concluding that the auctions have been effective devices for facilitating new entry into electricity markets and for developing wholesale power markets. (author)

  2. Case study of the effects of public safety regulation on the construction costs of coal-fired and nuclear power plants

    Morris, C.D.

    1987-01-01

    Regulations intended to reduce the number of accidents at nuclear plants and the discharge of sulfur and particulate wastes at coal-fired power plants have become an important cause of construction cost escalation. Measuring the costs of these regulatory interventions is a difficult research task. The three-unit Bruce Mansfield coal-fired plant and the two-unit Beaver Valley nuclear power station located in Shippingport, Pennsylvania, provide a unique opportunity for a case study of the costs of regulation in the construction of both kinds of plants. The units of each plant were built sequentially over a period of intensifying regulation. The method used to measure the costs of public safety regulation in the construction of each kind of plant is to determine the connections between the issuances of the regulatory agencies (EPA and NRC) and cost escalations of succeeding units. The small cost escalations of the Mansfield 3 unit, in comparison to the massive costs of the Beaver Valley 2 unit, suggest that the design and construction of new coal-fired plants are not disrupted by regulatory interventions nearly as extensively as are nuclear units. Certain technical features of Beaver Valley 2, especially its small size and a design that is identical to the first unit's, further contribute to its cost escalations

  3. Nuclear power plant

    Aisaka, Tatsuyoshi; Kamahara, Hisato; Yanagisawa, Ko.

    1982-01-01

    Purpose: To prevent corrosion stress cracks in structural materials in a BWR type nuclear power plant by decreasing the oxygen concentration in the reactor coolants. Constitution: A hydrogen injector is connected between the condensator and a condensate clean up system of a nuclear power plant. The injector is incorporated with hydrogenated compounds formed from metal hydrides, for example, of alloys such as lanthanum-nickel alloy, iron titanium alloy, vanadium, palladium, magnesium-copper alloy, magnesium-nickel alloy and the like. Even if the pressure of hydrogen obtained from a hydrogen bomb or by way of water electrolysis is changed, the hydrogen can always be injected into a reactor coolant at a pressure equal to the equilibrium dissociation pressure for metal hydride by introducing the hydrogen into the hydrogen injector. (Seki, T.)

  4. Nuclear power plant

    Schabert, H.P.; Laurer, E.

    1976-01-01

    The invention concerns a quick-acting valve on the main-steam pipe of a nuclear power plant. The engineering design of the valve is to be improved. To the main valve disc, a piston-operated auxiliary valve disc is to be assigned closing a section of the area of the main valve disc. This way it is avoided that the drive of the main valve disc has to carry out different movements. 15 sub-claims. (UWI) [de

  5. Fusion power plant economics

    Miller, R.L.

    1996-01-01

    The rationale, methodology, and updated comparative results of cost projections for magnetic-fusion-energy central-station electric power plants are considered. Changing market and regulatory conditions, particularly in the U.S., prompt fundamental reconsideration of what constitutes a competitive future energy-source technology and has implications for the direction and emphasis of appropriate near-term research and development programs, for fusion and other advanced generation systems. 36 refs., 2 figs., 2 tabs

  6. Power plant emissions reduction

    Anand, Ashok Kumar; Nagarjuna Reddy, Thirumala Reddy

    2015-10-20

    A system for improved emissions performance of a power plant generally includes an exhaust gas recirculation system having an exhaust gas compressor disposed downstream from the combustor, a condensation collection system at least partially disposed upstream from the exhaust gas compressor, and a mixing chamber in fluid communication with the exhaust gas compressor and the condensation collection system, where the mixing chamber is in fluid communication with the combustor.

  7. French nuclear power experience with public opinion

    Havlicek, R.

    1990-01-01

    Establishing information centres proved to be advantageous in France. In this way, about 300 000 people visit nuclear power plants annually. EdF staff members periodically supply information to media people. Emphasis is also laid on good contacts with Members of Parliament, physicians, clergymen, teachers and politicians. The strategy of indirect communication is recognized: the utilities should not speak for themselves, it is better for somebody else to say the thing. No debates are organized with Greenpeace, who are too militant, irrational and untrustworthy. Municipalities where nuclear power plants are sited receive tax money from the plants (as from any other industrial plant), so that if the power plant is shut down, the population often demands that a new nuclear power plant be built there. Absolute transparency, openness and immediate response are vital in contacts with the public. (M.D.). 1 fig

  8. Atomic power plant

    Kawakami, Hiroto.

    1975-01-01

    Object: To permit decay heat to be reliably removed after reactor shut-down at such instance as occurrence of loss of power by means of an emergency water supply pump. Structure: An atomic power plant having a closed cycle constructed by connecting a vapor generator, a vapor valve, a turbine having a generator, a condenser, and a water supply pump in the mentioned order, and provided with an emergency water supply pump operated when there is a loss of power to the water supply pump, a degasifier pressure holding means for holding the pressure of the degasifier by introducing part of the vapor produced from said vapor generator, and a valve for discharge to atmosphere provided on the downstream side of said vapor generator. (Kamimura, M.)

  9. Public concern for nuclear power

    Bibb, W.R.

    1975-01-01

    Three principles that the U.S. must follow in order to maintain its present way of life are stated: practice of energy conservation; substitution of the more plentiful fuels for the scarce; and development of synthetic fuels and unconventional energy sources. After describing the organizing of the energy agencies and reviewing the history of the nuclear power program in the U.S., the author then discusses the public's concern for nuclear energy which includes radioactive discharges, reactor safety, high-level wastes, and shipment of radioactive materials. He refers to the study by Dr. Norman C. Rasmussen released in 1974, which indicates that the likelihood of a person living in the general vicinity of a reactor being injured in any one year in a reactor accident is one chance in 150 million as compared to his chance of being injured in an automobile accident in that same year as one in 130. On a broader societal viewpoint, if there were 100 reactors operating in the U.S., one individual of the 15 million inhabitants living in the vicinity of these reactors might be killed and two individuals might be injured every 25 years as compared to 1.5 million injuries and 55,000 fatalities in 1974 due to automobile accidents. The author concludes that public acceptance of nuclear power will depend on whether these plants, after a reasonable maturing period, deliver the reliable, economic, and safe power that has been proclaimed

  10. Garigliano nuclear power plant

    1976-03-01

    During the period under review, the Garigliano power station produced 1,028,77 million kWh with a utilization factor of 73,41% and an availability factor of 85,64%. The disparity between the utilization and availability factors was mainly due to a shutdown of about one and half months owing to lack of staff at the plant. The reasons for nonavailability (14.36%) break down as follows: nuclear reasons 11,49%; conventional reasons 2,81%; other reasons 0,06%. During the period under review, no fuel replacements took place. The plant functioned throughout with a single reactor reticulation pump and resulting maximum available capacity of 150 MWe gross. After the month of August, the plant was operated at levels slightly below the maximum available capacity in order to lengthen the fuel cycle. The total number of outages during the period under review was 11. Since the plant was brought into commercial operation, it has produced 9.226 million kWh

  11. Summary of public comments and NRC staff analysis relating to rulemaking on emergency planning for nuclear power plants

    1980-09-01

    This NUREG provides a summary and discussions of public comments received during the expedited rulemaking to upgrade emergency preparedness around nuclear power reactor sites. The final rule was published in the Federal Register (45 FR 55402) on August 19, 1980. The information in NUREG-0684 was excerpted in the main from internal paper SECY-80-275 (June 3, 1980) which forwarded the final rule to the Commission for consideration. This document, along with NUREG-0628, NUREG/CP-0011, and the materials cited in the Final Rules, should be considered a compendium of the major issues raised in this proceeding and acted upon by the Commission

  12. Mobile power plant units

    Radtke, R

    1979-10-05

    Diesel engines of the MaK line 282 AK/332 with a cylinder power up to 160 kW are used, either as 6-cylinder or 8-cylinder in-line engine or as 12-cylinder V engine. Fuel consumption is between 207 and 212 g/kW. The engine is mounted on a frame, together with a generator. The fuel reserve in the tank will last for 8 hours. The lubricating system, the cooling water and starting air system, the switchboard system, and the frame are described. The switchboard plant is mounted either on a skid undercarriage or on the undercarriage. The plant can be operated independently or parallel to the network. The unit can be remote-controlled via push buttons or control knobs. A picture is presented of a mobile diesel aggregate which is in service in Libya.

  13. Comparative studies between nuclear power plants and hydroelectric power plants

    Menegassi, J.

    1984-01-01

    This paper shows the quantitative evolution of the power plants in the main countries of the world. The Brazilian situation is analysed, with emphasys in the technical and economical aspects related to power production by hidroelectric or nuclear power plants. The conclusion is that the electricity produced by hidro power plants becomes not economics when is intended to be produced at large distances from the demand centers. (Author) [pt

  14. Nuclear power plant disasters

    Trott, K.R.

    1979-01-01

    The possibility of a nuclear power plant disaster is small but not excluded: in its event, assistance to the affected population mainly depends on local practitioners. Already existing diseases have to be diagnosed and treated; moreover, these physicians are responsible for the early detection of those individuals exposed to radiation doses high enough to induce acute illness. Here we present the pathogenesis, clinical development and possible diagnostic and therapeutical problems related to acute radiation-induced diseases. The differentiation of persons according to therapy need and prognosis is done on the sole base of the clinical evidence and the peripheral blood count. (orig.) [de

  15. Demonstration tokamak power plant

    Abdou, M.; Baker, C.; Brooks, J.; Ehst, D.; Mattas, R.; Smith, D.L.; DeFreece, D.; Morgan, G.D.; Trachsel, C.

    1983-01-01

    A conceptual design for a tokamak demonstration power plant (DEMO) was developed. A large part of the study focused on examining the key issues and identifying the R and D needs for: (1) current drive for steady-state operation, (2) impurity control and exhaust, (3) tritium breeding blanket, and (4) reactor configuration and maintenance. Impurity control and exhaust will not be covered in this paper but is discussed in another paper in these proceedings, entitled Key Issues of FED/INTOR Impurity Control System

  16. A Powerful Public Sphere?

    Fiig, Christina

    The paper holds a critical discussion of the Habermasian model of the public sphere and proposes a revised model of a general public......The paper holds a critical discussion of the Habermasian model of the public sphere and proposes a revised model of a general public...

  17. Siting nuclear power plants

    Yellin, J.; Joskow, P.L.

    1980-01-01

    The first edition of this journal is devoted to the policies and problems of siting nuclear power plants and the question of how far commercial reactors should be placed from urban areas. The article is divided into four major siting issues: policies, risk evaluation, accident consequences, and economic and physical constraints. One concern is how to treat currently operating reactors and those under construction that were established under less-stringent criteria if siting is to be used as a way to limit the consequences of accidents. Mehanical cost-benefit analyses are not as appropriate as the systematic use of empirical observations in assessing the values involved. Stricter siting rules are justified because (1) opposition because of safety is growing: (2) remote siting will make the industry more stable; (3) the conflict is eliminated between regulatory policies and the probability basis for nuclear insurance; and (4) joint ownership of utilities and power-pooling are increasing. 227 references, 7 tables

  18. Pulsed nuclear power plant

    David, C.V.

    1986-01-01

    This patent describes a nuclear power plant. This power plant consists of: 1.) a cavity; 2.) a detonatable nuclear device in a central region of the cavity; 3.) a working fluid inside of the cavity; 4.) a method to denote a nuclear device inside of the cavity; 5.) a mechanical projection from an interior wall of the cavity for recoiling to absorb a shock wave produced by the detonation of the nuclear device and thereby protecting the cavity from damage. A plurality of segments defines a shell within the cavity and a plurality of shock absorbers, each connecting a corresponding segment to a corresponding location on the wall of the cavity. Each of these shock absorbers regulate the recoil action of the segments; and 6.) means for permitting controlled extraction of a quantity of hot gases from the cavity produced by the vaporization of the working fluid upon detonation of the nuclear device. A method of generating power is also described. This method consists of: 1.) introducing a quantity of water in an underground cavity; 2.) heating the water in the cavity to form saturated steam; 3.) detonating a nuclear device at a central location inside the cavity; 4.) recoiling plate-like elements inside the cavity away from the central location in a mechanically regulated and controlled manner to absorb a shock wave produced by the nuclear device detonation and thereby protect the underground cavity against damage; 5.) extracting a quantity of superheated steam produced by the detonation of the nuclear device; and 6.) Converting the energy in the extracted superheated steam into electrical power

  19. Wind power plant system services

    Basit, Abdul; Altin, Müfit

    Traditionally, conventional power plants have the task to support the power system, by supplying power balancing services. These services are required by the power system operators in order to secure a safe and reliable operation of the power system. However, as in the future the wind power...... is going more and more to replace conventional power plants, the sources of conventional reserve available to the system will be reduced and fewer conventional plants will be available on-line to share the regulation burden. The reliable operation of highly wind power integrated power system might...... then beat risk unless the wind power plants (WPPs) are able to support and participate in power balancing services. The objective of this PhD project is to develop and analyse control strategies which can increase the WPPs capability to provide system services, such as active power balancing control...

  20. Industrial safety in power plants

    1987-01-01

    The proceedings of the VGB conference 'Industrial safety in power plants' held in the Gruga-Halle, Essen on January 21 and 22, 1987, contain the papers reporting on: Management responsibility for and legal consequences of industrial safety; VBG 2.0 Industrial Accident Prevention Regulation and the power plant operator; Operational experience gained with wet-type flue gas desulphurization systems; Flue gas desulphurization systems: Industrial-safety-related requirements to be met in planning and operation; the effects of the Hazardous Substances Ordinance on power plant operation; Occupational health aspects of heat-exposed jobs in power plants; Regulations of the Industrial Accident Insurance Associations concerning heat-exposed jobs and industrial medical practice; The new VBG 30 Accident Prevention Regulation 'Nuclear power plants'; Industrial safety in nuclear power plants; safe working on and within containers and confined spaces; Application of respiratory protection equipment in power plants. (HAG) [de

  1. Nuclear Power Plants | RadTown USA | US EPA

    2018-03-12

    Nuclear power plants produce electricity from the heat created by splitting uranium atoms. In the event of a nuclear power plant emergency, follow instructions from emergency responders and public officials.

  2. Nuclear Power Plant 1996

    1997-01-01

    Again this year, our magazine presents the details of the conference on Spanish nuclear power plant operation held in February and that was devoted to 1996 operating results. The Protocol for Establishment of a New Electrical Sector Regulation that was signed last December will undoubtedly represent a new challenge for the nuclear industry. By clearing stating that current standards of quality and safety should be maintained or even increased if possible, the Protocol will force the Sector to improve its productivity, which is already high as demonstrated by the results of the last few years described during this conference and by recent sectorial economic studies. Generation of a nuclear kWh that can compete with other types of power plants is the new challenge for the Sector's professionals, who do not fear the new liberalization policies and approaching competition. Lower inflation and the resulting lower interest rates, apart from being representative indices of our economy's marked improvement, will be very helpful in facing this challenge. (Author)

  3. A review of public desert land lease policies for concentrated solar power plants and the impact on their economic performance

    Smyrnakis, Christos; Phocas-Cosmetatos, Alex; Kynigalakis, Kostantinos

    2016-05-01

    Large scale Concentrated Solar Power (CSP) plants need large plots of land with very high solar resource and thus are often deployed in desert areas which are usually owned by the state or a municipal authority. This study discusses the implication and practices of land lease policies with regards to CSP development. The strategy followed on a land lease is examined by definition on a case-specific basis and this text is by no means exhaustive with regards to its content. The study also discusses the pricing of land in various cases, presents the governing types of land lease and their effect on the economic performance of hypothetical CSP projects under various cases.

  4. Nuclear power plants

    Ushijima, Susumu.

    1984-01-01

    Purpose: To enable to prevent the degradation in the quality of condensated water in a case where sea water leakage should occur in a steam condenser of a BWR type nuclear power plant. Constitution: Increase in the ion concentration in condensated water is detected by an ion concentration detector and the leaking factor of sea water is calculated in a leaking factor calculator. If the sea water leaking factor exceeds a predetermined value, a leak generation signal is sent from a judging device to a reactor power control device to reduce the reactor power. At ehe same tiem, the leak generation signal is also sent to a steam condenser selection and isolation device to interrupt the sea water pump of a specified steam condenser based on the signal from the ion concentration detector, as well as close the inlet and outlet valves while open vent and drain valves to thereby forcively discharge the sea water in the cooling water pipes. This can keep the condensate desalting device from ion breaking and prevent the degradation in the quality of the reactor water. (Horiuchi, T.)

  5. Public perception on the benefits and risks of nuclear power plants. A simplified study; Um estudo simplificado da percepcao publica dos beneficios e riscos de centrais termonucleares

    Ribeiro Junior, Joaquim Apparecido

    2007-07-01

    Public acceptance of the nuclear based electricity generation depends on many variables that can be affected by circumstances and interests, which although seemingly not close to the issue, can strongly influence the final outcome. Explicit or consented positions assumed by opinion makers and some segments of society are subject to episodic waves of interaction through the media and they permeate to the public in a process that is very complex to be fully understood. The modeling of such process is a very complicated undertaking, and gives no assurance of practical results concerning to what, how and who, should be given prominence in the interactions with the media and the general public. In this context, the risk communication has assumed a leading role and, as a consequence, most of the interaction with the public has been done with both defensive language and content. This study has tried a simple and practical approach to the problem, in such a way as to gather some interesting subsidies to treat this issue in a different way. The basic assumption is that in a similar way as individuals base their decision to acquire a new good or service on a 'intuitive' cost-benefit judgment, society (as a collection of individuals) also manifest their acceptance (or not) with respect to industrial installations and undertakings by comparing risks and benefits according to their perception. An exploratory survey was carried out in a few high schools, colleges and MBA courses in the state of Sao Paulo, Brazil. A first part was aimed to catch and understand the public perception of: the intrinsic value of the electric energy, the need to universalize the access to electricity, nuclear plants, the acceptance deficit of nuclear power as compared to other sources of energy, the benefits a nuclear plant can bring and who does and who does not deserves credibility to speak about nuclear plants. The second part was addressed to grasp a picture of more relevant distortions

  6. Hybrid combined cycle power plant

    Veszely, K.

    2002-01-01

    In case of re-powering the existing pressurised water nuclear power plants by the proposed HCCPP solution, we can increase the electricity output and efficiency significantly. If we convert a traditional nuclear power plant unit to a HCCPP solution, we can achieve a 3.2-5.5 times increase in electricity output and the achievable gross efficiency falls between 46.8-52% and above, depending on the applied solution. These figures emphasise that we should rethink our power plant technologies and we have to explore a great variety of HCCPP solutions. This may give a new direction in the development of nuclear reactors and power plants as well.(author)

  7. Seismic reevaluation of existing nuclear power plants

    Hennart, J.C.

    1978-01-01

    The codes and regulations governing Nuclear Power Plant seismic analysis are continuously becoming more stringent. In addition, design ground accelerations of existing plants must sometimes be increased as a result of discovery of faulting zones or recording of recent earthquakes near the plant location after plant design. These new factors can result in augmented seismic design criteria. Seismic reanalysius of the existing Nuclear Power Plant structures and equipments is necessary to prevent the consequences of newly postulated accidents that could cause undue risk to the health or safety of the public. This paper reviews the developments of seismic analysis as applied to Nuclear Power Plants and the methods used by Westinghouse to requalify existing plants to the most recent safety requirements. (author)

  8. Accident prevention in power plants

    Steyrer, H.

    Large thermal power plants are insured to a great extent at the Industrial Injuries Insurance Institute of Instrument and Electric Engineering. Approximately 4800 employees are registered. The accident frequency according to an evaluation over 12 months lies around 79.8 per year and 1000 employees in fossil-fired power plants, around 34.1 per year and 1000 employees in nuclear power plants, as in nuclear power plants coal handling and ash removal are excluded. Injuries due to radiation were not registered. The crucial points of accidents are mechanical injuries received on solid, sharp-edged and pointed objects (fossil-fired power plants 28.6%, nuclear power plants 41.5%), stumbling, twisting or slipping (fossil-fired power plants 21.8%, nuclear power plants 19.5%) and injuries due to moving machine parts (only nuclear power plants 12.2%). However, accidents due to burns or scalds obtain with 4.2% and less a lower portion than expected. The accident statistics can explain this fact in a way that the typical power plant accident does not exist. (orig./GL) [de

  9. The role of the visitors' centre during the decommissioning of the Greifswald nuclear power plant and the impact on the public

    Brauer, D.

    1993-01-01

    In the Energiewerke Nord (EWN) GmbH, the former Nuclear Power Plant (NPP) Greifswald have been the units 1 to 5 shut down finally. The units 6 to 8 are in different stages of construction, but it will not be continued. The current situation, tasks and perspectives at the Greifswald NPP site are briefly described. The main tasks are the post-operation, the decommissioning and the establishment of an industrial area. Considering the situation at the Greifswald site the particularities and necessities and the influence of the Visitors' centre on the neighbouring villages, communities, population and the impact on the public are discussed. (author)

  10. Technical basis for instrumentation and control design improvements in WWER-440/230 nuclear power plants. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

    1996-01-01

    Instrumentation and control (I and C) has been recognized as an area which requires substantial improvements in WWER NNPs, particularly for model 230 plants. Under contract with the IAEA the Spanish company Empresarios Agrupados (EA) developed a basic document proposing a technical basis for improvements related to the following most significant aspects of I and C: criteria for safety classification; remote shutdown panel; I and C support to operation and control room design; instrumentation set point margins; accident monitoring instrumentation. This publication is derived from the original report of EA which was circulated by the IAEA for review by staff members and experts from various Member States. It was finally agreed upon at a Consultants' meeting convened by the IAEA in Vienna in May 1994 with the participation of experts from France, Germany and Spain. The guidance expressed in this report is based on the IAEA/NUSS standards, safety guides and practices, and on regulations in use in various Member States. It is proposed as a way of carrying out the necessary studies to improve safety by upgrading the vital part of instrumentation an control in WWER-440 model 230 nuclear power plants. 28 refs, 3 figs

  11. Wuergassen nuclear power plant

    Anon.

    1989-01-01

    The decision of the Federal Court of Administration concerns an application for immediate decommissioning of a nuclear power plant (Wuergassen reactor): The repeal of the permit granted. The decision dismisses the appeal for non-admission lodged by the plaintiffs against the ruling of the Higher Court of Administration (OVG) of North-Rhine Westphalia of December 19th 1988 (File no. 21 AK 8/88). As to the matter in dispute, the Federal Court of Administration confirms the opinion of the Higher Court of Administration. As to the headnotes, reference can be made to that decision. Federal Court of Administration, decision of April 5th 1989 - 7 B 47.89. Lower instance: OVG NW, Az.: 21 AK 8/88. (orig./RST) [de

  12. Nuclear power plant

    Uruma, Hiroshi

    1998-01-01

    In the first embodiment of the present invention, elements less activated by neutrons are used as reactor core structural materials placed under high neutron irradiation. In the second embodiment of the present invention, materials less activated by neutrons when corrosive materials intrude to a reactor core are used as structural materials constituting portions where corrosion products are generated. In the third embodiment, chemical species comprising elements less activated by neutrons are used as chemical species to be added to reactor water with an aim of controlling water quality. A nuclear power plant causing less radioactivity can be provided by using structural materials comprising a group of specific elements hardly forming radioactivity by activation of neutrons or by controlling isotope ratios. (N.H.)

  13. Nuclear power plant

    Schabert, H.P.

    1976-01-01

    A nuclear power plant is described which includes a steam generator supplied via an input inlet with feedwater heated by reactor coolant to generate steam, the steam being conducted to a steam engine having a high pressure stage to which the steam is supplied, and which exhausts the steam through a reheater to a low pressure stage. The reheater is a heat exchanger requiring a supply of hot fluid. To avoid the extra load that would be placed on the steam generator by using a portion of its steam output as such heating fluid, a portion of the water in the steam generator is removed and passed through the reheater, this water having received at least adequate heating in the steam generator to make the reheater effective, but not at the time of its removal being in a boiling condition

  14. Questions and Answers About Nuclear Power Plants.

    Environmental Protection Agency, Washington, DC.

    This pamphlet is designed to answer many of the questions that have arisen about nuclear power plants and the environment. It is organized into a question and answer format, with the questions taken from those most often asked by the public. Topics include regulation of nuclear power sources, potential dangers to people's health, whether nuclear…

  15. Power Plant Replacement Study

    Reed, Gary

    2010-09-30

    This report represents the final report for the Eastern Illinois University power plant replacement study. It contains all related documentation from consideration of possible solutions to the final recommended option. Included are the economic justifications associated with the chosen solution along with application for environmental permitting for the selected project for construction. This final report will summarize the results of execution of an EPC (energy performance contract) investment grade audit (IGA) which lead to an energy services agreement (ESA). The project includes scope of work to design and install energy conservation measures which are guaranteed by the contractor to be self-funding over its twenty year contract duration. The cost recovery is derived from systems performance improvements leading to energy savings. The prime focus of this EPC effort is to provide a replacement solution for Eastern Illinois University's aging and failing circa 1925 central steam production plant. Twenty-three ECMs were considered viable whose net impact will provide sufficient savings to successfully support the overall project objectives.

  16. Power Plant Replacement Study

    Reed, Gary

    2010-09-30

    This report represents the final report for the Eastern Illinois University power plant replacement study. It contains all related documentation from consideration of possible solutions to the final recommended option. Included are the economic justifications associated with the chosen solution along with application for environmental permitting for the selected project for construction. This final report will summarize the results of execution of an EPC (energy performance contract) investment grade audit (IGA) which lead to an energy services agreement (ESA). The project includes scope of work to design and install energy conservation measures which are guaranteed by the contractor to be self-funding over its twenty year contract duration. The cost recovery is derived from systems performance improvements leading to energy savings. The prime focus of this EPC effort is to provide a replacement solution for Eastern Illinois University’s aging and failing circa 1925 central steam production plant. Twenty-three ECMs were considered viable whose net impact will provide sufficient savings to successfully support the overall project objectives.

  17. Perspectives of nuclear power plants

    Vajda, Gy.

    2001-01-01

    In several countries the construction of nuclear power plants has been stopped, and in some counties several plants have been decommissioned or are planned to. Therefore, the question arises: have nuclear power plants any future? According to the author, the question should be reformulated: can mankind survive without nuclear power? To examine this challenge, the global power demand and its trends are analyzed. According to the results, traditional energy sources cannot be adequate to supply power. Therefore, a reconsideration of nuclear power should be imminent. The economic, environmental attractions are discussed as opposite to the lack of social support. (R.P.)

  18. Wind-power plant

    Kling, A

    1976-08-26

    The invention is concerned with a wind-power plant whose rotor axis is pivoted in the supporting structure and swingable around an axis of tilt, forming an angle with the rotor axis and the vertical axis, and allowing precession of the rotor. On changes of wind direction an electric positioning device is moving the rotor axis into the new direction in such a way that no precession forces are exerted on the supporting structure and this one may very easily be held. Instead of one rotor, also a type with two coaxial, co-planar countercurrent rotors may be used. Each of the two countercurrent rotors is carrying a number of magnetic poles, distributed all over the circumference, acting together with the magnetic poles of the other rotor. At least the poles of one rotor have electric line windings being connected by leads with a collector so that the two rotors form the two parts of a power generator being each rotatable with respect to the other ('stator' and 'rotor').

  19. Report concerning Zarnowiec nuclear power plant

    Albinowski, S.; Dakowski, M.; Downarowicz, M.

    1990-01-01

    Report of the Team of the President of the National Atomic Energy Agency regarding Zarnowiec nuclear power plant contains the analysis of situation in Poland in June 1990, the assessment of public opinion, as well as the description of ecological, technical and economical problems. The team's conclusions are given together with the general conclusion to stop the construction of Zarnowiec nuclear power plant. 5 appendixes, 6 enclosures, 1 documents list, 1 tab. (A.S.)

  20. Risk analyses of nuclear power plants

    Jehee, J.N.T.; Seebregts, A.J.

    1991-02-01

    Probabilistic risk analyses of nuclear power plants are carried out by systematically analyzing the possible consequences of a broad spectrum of causes of accidents. The risk can be expressed in the probabilities for melt down, radioactive releases, or harmful effects for the environment. Following risk policies for chemical installations as expressed in the mandatory nature of External Safety Reports (EVRs) or, e.g., the publication ''How to deal with risks'', probabilistic risk analyses are required for nuclear power plants

  1. Nuclear power: restoring public confidence

    Arnold, L.

    1986-01-01

    The paper concerns a one day conference on nuclear power organised by the Centre for Science Studies and Science Policy, Lancaster, April 1986. Following the Chernobyl reactor accident, the conference concentrated on public confidence in nuclear power. Causes of lack of public confidence, public perceptions of risk, and the effect of Chernobyl in the United Kingdom, were all discussed. A Select Committee on the Environment examined the problems of radioactive waste disposal. (U.K.)

  2. Power generation by nuclear power plants

    Bacher, P.

    2004-01-01

    Nuclear power plays an important role in the world, European (33%) and French (75%) power generation. This article aims at presenting in a synthetic way the main reactor types with their respective advantages with respect to the objectives foreseen (power generation, resources valorization, waste management). It makes a fast review of 50 years of nuclear development, thanks to which the nuclear industry has become one of the safest and less environmentally harmful industry which allows to produce low cost electricity: 1 - simplified description of a nuclear power generation plant: nuclear reactor, heat transfer system, power generation system, interface with the power distribution grid; 2 - first historical developments of nuclear power; 3 - industrial development and experience feedback (1965-1995): water reactors (PWR, BWR, Candu), RBMK, fast neutron reactors, high temperature demonstration reactors, costs of industrial reactors; 4 - service life of nuclear power plants and replacement: technical, regulatory and economical lifetime, problems linked with the replacement; 5 - conclusion. (J.S.)

  3. Brighter for small power plants

    Haaland, Leif

    2003-01-01

    The article presents a small tunnel drilling machine aimed at using for the construction of small hydroelectric power plants and mentions briefly some advantages economically and environmentally of both the machine and the power production solution

  4. Evaluation of averted doses to members of the Public by tap water restrictions after the Fukushima Daiichi Nuclear Power Plant accident

    Kinase, Sakae; Kimura, Masanori; Hato, Shinji

    2014-01-01

    The effectiveness of urgent protective measures such as tap water restrictions and bottled water supplies in the early stage of an emergency exposure situation was studied after the Fukushima Daiichi nuclear power plant accident. Temporal changes in the concentration of an important radionuclide –iodine 131– in tap water were analyzed using published data in Fukushima, Ibaraki and Tokyo. Averted doses to members of the public due to chronic intakes of iodine 131 through tap water restrictions were also evaluated using an internal dose calculation code, DSYS-chronic code. In addition, the costs of bottled water supplies were calculated approximately. Consequently, it was found that the apparent half-life of iodine 131 in tap water was 2.8±1.2 days. The averted equivalent doses to the thyroid of members of the public –1-year-old children– were found to have a maximum value of 8.2 mSv in a local area of Fukushima. In comparison with Fukushima, the bottled water supplies might be a large sum of money regardless of the low doses in Tokyo. In conclusion, apart from the bottled water supplies, the tap water restrictions implemented by the authorities would be effective after the Fukushima Daiichi nuclear power plant accident. (author)

  5. Are atomic power plants saver than nuclear power plants

    Roeglin, H.C.

    1977-01-01

    It is rather impossible to establish nuclear power plants against the resistance of the population. To prevail over this resistance, a clarification of the citizens-initiatives motives which led to it will be necessary. This is to say: It is quite impossible for our population to understand what really heappens in nuclear power plants. They cannot identify themselves with nuclear power plants and thus feel very uncomfortable. As the total population feels the same way it is prepared for solidarity with the citizens-initiatives even if they believe in the necessity of nuclear power plants. Only an information-policy making transparent the social-psychological reasons of the population for being against nuclear power plants could be able to prevail over the resistance. More information about the technical procedures is not sufficient at all. (orig.) [de

  6. Employing modern power plant simulators in nuclear power plants

    Niedorf, V.; Storm, J.

    2005-01-01

    At the present state of the art, modern power plant simulators are characterized by new qualitative features, thus enabling operators to use them far beyond the traditional field of training. In its first part, this contribution presents an overview of the requirements to be met by simulators for multivalent uses. In part two, a survey of the uses and perspectives of simulation technology in power plants is presented on the basis of experience accumulated by Rheinmetall Defence Electronics (RDE).Modern simulators are shown to have applications by far exceeding traditional training areas. Modular client - sever systems on standard computers allow inexpensive uses to be designed at several levels, thus minimizing maintenance cost. Complex development and running time environments, like the SEMS developed by RDE, have made power plant simulators the workhorses of power plant engineers in all power plant areas. (orig.)

  7. Fear of living dangerously: public attitudes toward nuclear power

    Inglehart, R.

    1984-01-01

    Public misconceptions about nuclear power and the inability to separate nuclear power plants from atomic bombs persists. The fear which is generated over plant accidents and the sensational reporting by the media have made the public fearful and opposed to nuclear power. A rational weighing of nuclear risks should include a consideration of the risks of not developing nuclear power as well as an assessment of the safety record of operating plants. The public needs to recognize that no energy system is absolutely safe and that nuclear plant accidents of the future will most likely be comparable to mining and other drilling accidents that are already considered acceptable. 1 reference, 2 tables

  8. The year 2000 power plant

    Roman, H.T.

    1989-01-01

    Every utility seeks extended service life from its existing power plants before building new ones. It is not easy to justify a new power plant. The licensing and cost of new plants have become uncertain. In response to these conditions, electric utilities are undertaking plant life-extension studies and, in some cases, reconditioning/upgrading old power plants to significantly increase useful service life. Other technologies like robotics and artificial intelligence/expert systems are also being developed to reduce operating and maintenance (O and M) expenses, to remove workers from potentially hazardous environments, and to reduce plant downtime. Together, these steps represent an interim solution, perhaps providing some relief for the next few decades. However, there are serious physical and economic limits to retrofitting new technology into existing power plants. Some old plants will simply be beyond their useful life and require retirement. In nuclear plants, for instance, retrofit may raise important and time-consuming licensing/safety issues. Based on their robotics and artificial intelligence experience, the authors of this article speculate bout the design of the year 2000 power plant - a power plant they feel will naturally incorporate liberal amounts of robotic and artificial intelligence technologies

  9. Images of nuclear power plants

    Hashiguchi, Katsuhisa; Misumi, Jyuji; Yamada, Akira; Sakurai, Yukihiro; Seki, Fumiyasu; Shinohara, Hirofumi; Misumi, Emiko; Kinjou, Akira; Kubo, Tomonori.

    1995-01-01

    This study was conducted to check and see, using Hayashi's quantification method III, whether or not the respondents differed in their images of a nuclear power plant, depending on their demographic variables particularly occupations. In our simple tabulation, we compared subject groups of nuclear power plant employees with general citizens, nurses and students in terms of their images of a nuclear power plant. The results were that while the nuclear power plant employees were high in their evaluations of facts about a nuclear power plant and in their positive images of a nuclear power plant, general citizens, nurses and students were overwhelmingly high in their negative images of a nuclear power plant. In our analysis on category score by means of the quantification method III, the first correlation axis was the dimension of 'safety'-'danger' and the second correlation axis was the dimension of 'subjectivity'-'objectivity', and that the first quadrant was the area of 'safety-subjectivity', the second quadrant was the area of 'danger-subjectivity', the third quadrant as the area of 'danger-objectivity', and the forth quadrant was the area of 'safety-objectivity'. In our analysis of sample score, 16 occupation groups was compared. As a result, it was found that the 16 occupation groups' images of a nuclear power plant were, in the order of favorableness, (1) section chiefs in charge, maintenance subsection chiefs, maintenance foremen, (2) field leaders from subcontractors, (3) maintenance section members, operation section members, (4) employees of those subcontractors, (5) general citizens, nurses and students. On the 'safety-danger' dimension, nuclear power plant workers on the one hand and general citizens, nurses and students on the other were clearly divided in terms of their images of a nuclear power plant. Nuclear power plant workers were concentrated in the area of 'safety' and general citizens, nurses and students in the area of 'danger'. (J.P.N.)

  10. VISIT - Virtual visits to nuclear power plants

    Mollaret, Jean-Christophe

    2001-01-01

    For more than twenty years, EDFs Communication Division has conducted a policy of opening its generation sites to the general public. Around 300,000 people visit a nuclear power plant every year. However, for the security of persons and the safety of facilities, those parts of the plant situated in controlled areas are not accessible to visitors. For the sake of transparency, EDF has taken an interest in the technologies offered by virtual reality to show the general public what a nuclear power plant is really like, so as to initiate dialogue on nuclear energy, particularly with young people. Visit has been developed with virtual reality technologies. It serves to show the invisible (voyage to the core of fission), the inaccessible and to immerse the visitors in environments which are usually closed to the general public (discovery of the controlled area of a nuclear power plant). Visit is used in Public Information Centres which receive visitors to EDF power plants and during international exhibitions and conferences. Visit allows a virtual tour of the following controlled areas: locker room hot area/cold area, a necessary passage before entering the controlled areas; reactor building; fuel building; waste auxiliary building (liquid, solid and gaseous effluents). It also includes a tour of the rooms or equipment usually accessible to the general public: control room, turbine hall, transformer, air cooling tower

  11. Nuclear power plant

    Urata, Hidehiro; Oya, Takashi

    1996-11-05

    The present invention provides a highly safe light water-cooled type nuclear power plant capable of reducing radiation dose by suppressing deposition of activated corrosion products by a simple constitution. Namely, equipments and pipelines for fluid such as pumps at least in one of fluid systems such as a condensate cleanup system are constituted by a material containing metal species such as Zn having an effect of suppressing deposition of radioactivity. Alternatively, the surface of these equipments and pipelines for fluids on which water passes is formed by a coating layer comprising a material containing a metal having a radiation deposition suppressing effect. As a result, radioactivity deposited on the equipments and pipelines for fluids is reduced. In addition, since the method described above may be applied only at least to a portion of the members constituting at least one of the systems for fluids, it is economical. Accordingly, radiation dose upon inspection of equipments and pipelines for fluids can be reduced simply and reliably. (I.S.)

  12. Nuclear power plant

    Urata, Hidehiro; Oya, Takashi.

    1996-01-01

    The present invention provides a highly safe light water-cooled type nuclear power plant capable of reducing radiation dose by suppressing deposition of activated corrosion products by a simple constitution. Namely, equipments and pipelines for fluid such as pumps at least in one of fluid systems such as a condensate cleanup system are constituted by a material containing metal species such as Zn having an effect of suppressing deposition of radioactivity. Alternatively, the surface of these equipments and pipelines for fluids on which water passes is formed by a coating layer comprising a material containing a metal having a radiation deposition suppressing effect. As a result, radioactivity deposited on the equipments and pipelines for fluids is reduced. In addition, since the method described above may be applied only at least to a portion of the members constituting at least one of the systems for fluids, it is economical. Accordingly, radiation dose upon inspection of equipments and pipelines for fluids can be reduced simply and reliably. (I.S.)

  13. Pipelines in power plants

    Oude-Hengel, H.H.

    1978-01-01

    Since the end of the Sixties, steam-transporting pipelines are given great attention, as pipeline components often fail, partially even long before their designed operation time is over. Thus, experts must increasingly deal with questions of pipelines and their components. Design and calculation, production and operation of pipelines are included in the discussion. Within the frame of this discussion, planners, producers, operators, and technical surveillance personnel must be able to offer a homogenous 'plan for assuring the quality of pipelines' in fossil and nuclear power plants. This book tries to make a contribution to this topic. 'Quality assuring' means efforts made for meeting the demands of quality (reliability). The book does not intend to complete with well-known manuals, as for as a complete covering of the topic is concerned. A substantial part of its sections serves to show how quality assurance of pipelines can be at least partially obtained by surveillance measures beginning with the planning, covering the production, and finally accompanying the operation. There is hardly need to mention that the sort of planning, production, and operation has an important influence on the quality. This is why another part of the sections contain process aspects from the view of the planners, producers, and operators. (orig.) [de

  14. Nuclear power plants

    Kiyokawa, Teruyuki; Soman, Yoshindo.

    1985-01-01

    Purpose: To constitute a heat exchanger as one unit by integrating primary and secondary coolant circuits with secondary coolant circuit and steam circuit into a single primary circuit and steam circuit. Constitution: A nuclear power plant comprises a nuclear reactor vessel, primary coolant pipeways and a leakage detection system, in which a dual-pipe type heat exchanger is connected to the primary circuit pipeway. The heat conduction tube of the heat exchanger has a dual pipe structure, in which the inside of the inner tube is connected to the primary circuit pipeway, the outside of the outer tube is connected to steam circuit pipeway and a fluid channel is disposed between the inner and outer tubes and the fluid channel is connected to the inside of an expansion tank for intermediate heat medium. The leak detection system is disposed to the intermediate heat medium expansion tank. Sodium as the intermediate heat medium is introduced from the intermediate portion (between the inner and outer tubes) by way of inermediate heat medium pipeways to the intermediate heat medium expansion tank and, further, to the intermediate portion for recycling. (Kawakami, Y.)

  15. Underground nuclear power plant

    Takahashi, Hideo.

    1997-01-01

    In an underground-type nuclear power plant, groups of containing cavities comprising a plurality of containing cavities connected in series laterally by way of partition walls are disposed in parallel underground. Controlled communication tunnels for communicating the containing cavities belonging to a control region to each other, and non-controlled communication tunnels for communicating containing cavities belonging to a non-controlled area to each other are disposed underground. A controlled corridor tunnel and a non-controlled corridor tunnel extended so as to surround the containing cavity groups are disposed underground, and the containing cavities belonging to the controlled area are connected to the controlled corridor tunnel respectively, and the containing cavities belonging to the non-controlled area are connected to the non-controlled corridor tunnel respectively. The excavating amount of earth and sand upon construction can be reduced by disposing the containing cavity groups comprising a plurality of containing cavities connected in series laterally. The time and the cost for the construction can be reduced, and various excellent effects can be provided. (N.H.)

  16. Power plants and safety 1982

    1982-01-01

    The papers of this volume deal with the whole range of safety issues from planning and construction to the operation of power plants, and discuss also issues like availability and safety of power plants, protective clothes and their incommodating effect, alternatives for rendering hot-water generators safe and the safety philosophy in steam turbine engineering. (HAG) [de

  17. Thermodynamic optimization of power plants

    Haseli, Y.

    2011-01-01

    Thermodynamic Optimization of Power Plants aims to establish and illustrate comparative multi-criteria optimization of various models and configurations of power plants. It intends to show what optimization objectives one may define on the basis of the thermodynamic laws, and how they can be applied

  18. Sabotage at Nuclear Power Plants

    Purvis, James W.

    1999-07-21

    Recently there has been a noted worldwide increase in violent actions including attempted sabotage at nuclear power plants. Several organizations, such as the International Atomic Energy Agency and the US Nuclear Regulatory Commission, have guidelines, recommendations, and formal threat- and risk-assessment processes for the protection of nuclear assets. Other examples are the former Defense Special Weapons Agency, which used a risk-assessment model to evaluate force-protection security requirements for terrorist incidents at DOD military bases. The US DOE uses a graded approach to protect its assets based on risk and vulnerability assessments. The Federal Aviation Administration and Federal Bureau of Investigation conduct joint threat and vulnerability assessments on high-risk US airports. Several private companies under contract to government agencies use formal risk-assessment models and methods to identify security requirements. The purpose of this paper is to survey these methods and present an overview of all potential types of sabotage at nuclear power plants. The paper discusses emerging threats and current methods of choice for sabotage--especially vehicle bombs and chemical attacks. Potential consequences of sabotage acts, including economic and political; not just those that may result in unacceptable radiological exposure to the public, are also discussed. Applicability of risk-assessment methods and mitigation techniques are also presented.

  19. Sabotage at Nuclear Power Plants

    Purvis, James W.

    1999-01-01

    Recently there has been a noted worldwide increase in violent actions including attempted sabotage at nuclear power plants. Several organizations, such as the International Atomic Energy Agency and the US Nuclear Regulatory Commission, have guidelines, recommendations, and formal threat- and risk-assessment processes for the protection of nuclear assets. Other examples are the former Defense Special Weapons Agency, which used a risk-assessment model to evaluate force-protection security requirements for terrorist incidents at DOD military bases. The US DOE uses a graded approach to protect its assets based on risk and vulnerability assessments. The Federal Aviation Administration and Federal Bureau of Investigation conduct joint threat and vulnerability assessments on high-risk US airports. Several private companies under contract to government agencies use formal risk-assessment models and methods to identify security requirements. The purpose of this paper is to survey these methods and present an overview of all potential types of sabotage at nuclear power plants. The paper discusses emerging threats and current methods of choice for sabotage--especially vehicle bombs and chemical attacks. Potential consequences of sabotage acts, including economic and political; not just those that may result in unacceptable radiological exposure to the public, are also discussed. Applicability of risk-assessment methods and mitigation techniques are also presented

  20. Owners of nuclear power plants

    Wood, R.S.

    1991-07-01

    This report indicates percentage ownership of commercial nuclear power plants by utility companies. The report includes all plants operating, under construction, docketed for NRC safety and environmental reviews, or under NRC antitrust review, but does not include those plants announced but not yet under review or those plants formally cancelled. Part 1 of the report lists plants alphabetically with their associated applicants or licensees and percentage ownership. Part 2 lists applicants or licensees alphabetically with their associated plants and percentage ownership. Part 1 also indicates which plants have received operating licenses (OLS)

  1. Nuclear power plant diagnostic system

    Prokop, K.; Volavy, J.

    1982-01-01

    Basic information is presented on diagnostic systems used at nuclear power plants with PWR reactors. They include systems used at the Novovoronezh nuclear power plant in the USSR, at the Nord power plant in the GDR, the system developed at the Hungarian VEIKI institute, the system used at the V-1 nuclear power plant at Jaslovske Bohunice in Czechoslovakia and systems of the Rockwell International company used in US nuclear power plants. These diagnostic systems are basically founded on monitoring vibrations and noise, loose parts, pressure pulsations, neutron noise, coolant leaks and acoustic emissions. The Rockwell International system represents a complex unit whose advantage is the on-line evaluation of signals which gives certain instructions for the given situation directly to the operator. The other described systems process signals using similar methods. Digitized signals only serve off-line computer analyses. (Z.M.)

  2. VGB Congress 'Power Plants 2006'

    Anon.

    2006-01-01

    The VGB Congress 'Power Plants' took place in Dresden, 27 th to 29 th September 2006 under the auspices of the Federal Minister for Economics and Technology, Michael Glos. The motto of this year's Congress was 'Future becomes Reality - Investments in New Power Plants'. More than 1,200 participants from Germany and abroad attended the plenary and technical lectures on the topics 'Market and Competition' as well as 'Technology, Operation and Environment' for information and discussion. Special papers were dealing with further issues like 'Generation Market in Europe', 'Clean Power Technology Platform', French policy for new power plants as well as potentials and technology of renewables. (orig.)

  3. Nuclear power plant V-1

    1998-01-01

    The nuclear power plant Bohunice V -1 is briefly described. This NPP consists from two reactor units. Their main time characteristics are (Reactor Unit 1, Reactor Unit 2): beginning of construction - 24 April 1972; first controlled reactor power - 27 November 1978, 15 March 1980; connection to the grid - 17 December 1978, 26 March 1980; commercial operation - 1 April 1980, 7 January 1981. This leaflet contains: NPP V-1 construction; Major technological equipment (Primary circuit: Nuclear reactor [WWER 440 V230 type reactor];Steam generator; Reactor Coolant Pumps; Primary Circuit Auxiliary Systems. Secondary circuit: Turbine generators, Nuclear power plant electrical equipment; power plant control) and technical data

  4. Determination Public Acceptance Segmentation for Nuclear Power Program Interest

    Syirrazie Che Soh; Aini Wahidah Abdul Wahab

    2012-01-01

    This paper is focus to discuss segmentation aspect among inter-disciplinary group of public. This discussion is the pre-stage to ensure the right initiative strategies are implemented to gain public interest and acceptance towards on developing nuclear power plant. The applied strategies are implemented based on different interest among the different groups of public. These strategies may increase public acceptance level towards developing nuclear power plant. (author)

  5. Emergency power systems at nuclear power plants

    1982-01-01

    This Guide applies to nuclear power plants for which the total power supply comprises normal power supply (which is electric) and emergency power supply (which may be electric or a combination of electric and non-electric). In its present form the Guide provides general guidance for all types of emergency power systems (EPS) - electric and non-electric, and specific guidance (see Appendix A) on the design principles and the features of the emergency electric power system (EEPS). Future editions will include a second appendix giving specific guidance on non-electric power systems. Section 3 of this Safety Guide covers information on considerations that should be taken into account relative to the electric grid, the transmission lines, the on-site electrical supply system, and other alternative power sources, in order to provide high overall reliability of the power supply to the EPS. Since the nuclear power plant operator does not usually control off-site facilities, the discussion of methods of improving off-site reliability does not include requirements for facilities not under the operator's control. Sections 4 to 11 of this Guide provide information, recommendations and requirements that would apply to any emergency power system, be it electric or non-electric

  6. AND THERMAL POWER PLANTS

    Alduhov Oleg Aleksandrovich

    2012-10-01

    Full Text Available Investigation of the atmospheric dispersion as part of the process of selection of sites to accommodate nuclear and thermal power plants is performed to identify concentration fields of emissions and to assess the anthropogenic impact produced on the landscape components and human beings. Scattering properties of the atmospheric boundary layer are mainly determined by the turbulence intensity and the wind field. In its turn, the turbulence intensity is associated with the thermal stratification of the boundary layer. Therefore, research of the atmospheric dispersion is reduced to the study of temperature and wind patterns of the boundary layer. Statistical processing and analysis of the upper-air data involves the input of the data collected by upper-air stations. Until recently, the upper-air data covering the standard period between 1961 and 1970 were applied for these purposes, although these data cannot assure sufficient reliability of assessments in terms of the properties of the atmospheric dispersion. However, recent scientific and technological developments make it possible to substantially increase the data coverage by adding the upper-air data collected within the period between 1964 and 2010. The article has a brief overview of BL_PROGS, a specialized software package designated for the processing of the above data. The software package analyzes the principal properties of the atmospheric dispersion. The use of the proposed software package requires preliminary development of a database that has the information collected by an upper-air station. The software package is noteworthy for the absence of any substantial limitations imposed onto the amount of the input data that may go up in proportion to the amount of the upper-air data collected by upper-air stations.

  7. Operating experience in nuclear power plants

    Anon.

    1984-01-01

    The nuclear power plants in the Federal Republic of Germany kept their portion of power supply into the public grid system constant in 1983, compared to 1982. The generation had an absolute increase of 3.6% and amounts now to 65.9 TWh. Particularly mentioned should be the generation of the Grafenrheinfeld Nuclear Power Plant which is holding the 'World Record' with 9.969 TWh. The availability of the plants was generally satisfactory, as far as long-term retrofit measures with long outage periods were not necessary, as it was the case in Brunsbuettel and Wuergassen. The planned retrofit phases have been completed in all power plants. As far as safety is concerned, there was no reason to recommended a change of the present fundamental planning- and operation aspects. (orig.) [de

  8. NB Power's public safety perspective

    Sisk, P [New Brunswick Power, Fredericton, NB (Canada)

    2009-07-01

    New Brunswick Power Generation (NB Power) - Genco operates and maintains one of North America's most diverse generating systems. It consists of 15 hydro, coal, oil and diesel-powered generating stations and supplies approximately 75 per cent of the in-province load. It also exports energy to neighbouring New England, Quebec, Prince Edward Island, and Nova Scotia. This presentation provided some history regarding public safety issues at NB Power. The Mactaquac generating system was discussed with particular reference to its activities, challenges and control measures such as signage, audible alarms, visuals, security fencing, and coast guard navigation buoys. Several recommendations were presented, such as developing a tool to conduct risk assessment at all hydro stations; developing a public safety campaign; installing booms where required; standardizing signs; evaluating security risks; and conducting pre-spill inspections to remove the public from dangerous areas. figs.

  9. Radiochemistry in nuclear power plants

    Schwarz, W.

    2007-01-01

    Radiochemistry is employed in nuclear power plants not as an end in itself but, among other things, as a main prerequisite of optimum radiation protection. Radiochemical monitoring of various loops provides important information about sources of radioactivity, activity distribution in the plant and its changes. In the light of these analytical findings, plant crews are able to take measures having a positive effect on radiation levels in the plant. The example of a BWR plant is used to show, among other things, how radiochemical analyses helped to reduce radiation levels in a plant and, as a consequence, to decrease clearly radiation exposure of the personnel despite higher workloads. (orig.)

  10. Intelligent distributed control for nuclear power plants

    Klevans, E.H.

    1992-01-01

    This project was initiated in September 1989 as a three year project to develop and demonstrate Intelligent Distributed Control (IDC) for Nuclear Power Plants. The body of this Third Annual Technical Progress report summarizes the period from September 1991 to October 1992. There were two primary goals of this research project. The first goal was to combine diagnostics and control to achieve a highly automated power plant as described by M.A. Schultz. His philosophy, is to improve public perception of the safety of nuclear power plants by incorporating a high degree of automation where a greatly simplified operator control console minimizes the possibility of human error in power plant operations. To achieve this goal, a hierarchically distributed control system with automated responses to plant upset conditions was pursued in this research. The second goal was to apply this research to develop a prototype demonstration on an actual power plant system, the EBR-2 stem plant. Emphasized in this Third Annual Technical Progress Report is the continuing development of the in-plant intelligent control demonstration for the final project milestone and includes: simulation validation and the initial approach to experiment formulation

  11. Using the Community Multiscale Air Quality (CMAQ) model to estimate public health impacts of PM2.5 from individual power plants.

    Buonocore, Jonathan J; Dong, Xinyi; Spengler, John D; Fu, Joshua S; Levy, Jonathan I

    2014-07-01

    We estimated PM2.5-related public health impacts/ton emitted of primary PM2.5, SO2, and NOx for a set of power plants in the Mid-Atlantic and Lower Great Lakes regions of the United States, selected to include varying emission profiles and broad geographic representation. We then developed a regression model explaining variability in impacts per ton emitted using the population distributions around each plant. We linked outputs from the Community Multiscale Air Quality (CMAQ) model v 4.7.1 with census data and concentration-response functions for PM2.5-related mortality, and monetized health estimates using the value-of-statistical-life. The median impacts for the final set of plants were $130,000/ton for primary PM2.5 (range: $22,000-230,000), $28,000/ton for SO2 (range: $19,000-33,000), and $16,000/ton for NOx (range: $7100-26,000). Impacts of NOx were a median of 34% (range: 20%-75%) from ammonium nitrate and 66% (range: 25%-79%) from ammonium sulfate. The latter pathway is likely from NOx enhancing atmospheric oxidative capacity and amplifying sulfate formation, and is often excluded. Our regression models explained most of the variation in impact/ton estimates using basic population covariates, and can aid in estimating impacts averted from interventions such as pollution controls, alternative energy installations, or demand-side management. Copyright © 2014 Elsevier Ltd. All rights reserved.

  12. Next Generation Geothermal Power Plants

    Brugman, John; Hattar, Mai; Nichols, Kenneth; Esaki, Yuri

    1995-09-01

    A number of current and prospective power plant concepts were investigated to evaluate their potential to serve as the basis of the next generation geothermal power plant (NGGPP). The NGGPP has been envisaged as a power plant that would be more cost competitive (than current geothermal power plants) with fossil fuel power plants, would efficiently use resources and mitigate the risk of reservoir under-performance, and minimize or eliminate emission of pollutants and consumption of surface and ground water. Power plant concepts were analyzed using resource characteristics at ten different geothermal sites located in the western United States. Concepts were developed into viable power plant processes, capital costs were estimated and levelized busbar costs determined. Thus, the study results should be considered as useful indicators of the commercial viability of the various power plants concepts that were investigated. Broadly, the different power plant concepts that were analyzed in this study fall into the following categories: commercial binary and flash plants, advanced binary plants, advanced flash plants, flash/binary hybrid plants, and fossil/geothed hybrid plants. Commercial binary plants were evaluated using commercial isobutane as a working fluid; both air-cooling and water-cooling were considered. Advanced binary concepts included cycles using synchronous turbine-generators, cycles with metastable expansion, and cycles utilizing mixtures as working fluids. Dual flash steam plants were used as the model for the commercial flash cycle. The following advanced flash concepts were examined: dual flash with rotary separator turbine, dual flash with steam reheater, dual flash with hot water turbine, and subatmospheric flash. Both dual flash and binary cycles were combined with other cycles to develop a number of hybrid cycles: dual flash binary bottoming cycle, dual flash backpressure turbine binary cycle, dual flash gas turbine cycle, and binary gas turbine

  13. Automation technology in power plants

    Essen, E.R.

    1995-01-01

    In this article a summery of the current architecture of modern process control systems in power plants and future trends have been explained. The further development of process control systems for power plants is influenced both by the developments in component and software technologies as well as the increased requirements of the power plants. The convenient and low cost configuration facilities of new process control systems have now reached a significance which makes it easy for customers to decide to purchase. (A.B.)

  14. Databases on safety issues for WWER and RBMK reactors. Users' manual. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

    1996-04-01

    At the beginning of the IAEA Extrabudgetary Programme on the safety of WWER reactors a great number of findings and recommendations (safety items) were collected as a result of design review and safety review missions of the WWER-440/230 type reactors. On the basis of these findings a technical database containing more than 1300 records was established to support the consolidation of the information obtained and to help in identification of safety issues. After the scope of the WWER extrabudgetary programme was extended similar data sets were prepared for the WWER-440/213, WWER-1000 and RBMK nuclear power plants. This publication describes the structure of the databases on safety issues of WWER and RBMK NPPs, the information sources used in the databases and interrogation capabilities for users to obtain the necessary information. 14 refs, 9 figs, 5 tabs

  15. Man and nuclear power plants

    Anon.

    1978-01-01

    According to the Inst. fuer Unfallforschung/TUeV Rheinland, Koeln, the interpretation of empirical data gained from the operation of nuclear power plants at home and abroad during the period 1967-1975 has shown that about 38% of all reactor accidents were caused by human failures. These occured either during the design and construction, the commissioning, the reconditioning or the operation of the plants. This very fact stresses human responsibility for the safety of nuclear power plants, in spite of those plants being automated to a high degree and devices. (orig.) [de

  16. Owners of nuclear power plants

    Hudson, C.R.; White, V.S.

    1996-11-01

    Commercial nuclear power plants in this country can be owned by a number of separate entities, each with varying ownership proportions. Each of these owners may, in turn, have a parent/subsidiary relationship to other companies. In addition, the operator of the plant may be a different entity as well. This report provides a compilation on the owners/operators for all commercial power reactors in the United States. While the utility industry is currently experiencing changes in organizational structure which may affect nuclear plant ownership, the data in this report is current as of July 1996. The report is divided into sections representing different aspects of nuclear plant ownership.

  17. Owners of nuclear power plants

    Wood, R.S.

    1979-12-01

    The following list indicates percentage ownership of commercial nuclear power plants by utility companies as of December 1, 1979. The list includes all plants licensed to operate, under construction, docketed for NRC safety and envionmental reviews, or under NRC antitrust review. It does not include those plants announced but not yet under review or those plants formally cancelled. In many cases, ownership may be in the process of changing as a result of antitrust license conditions and hearings, altered financial conditions, changed power needs, and other reasons. However, this list reflects only those ownership percentages of which the NRC has been formally notified

  18. Competitive breeder power plants

    Winkleblack, R.K.

    1984-01-01

    To utilize the fissile material that is accumulating in the utilities' spent fuel pools, breeder plants must be less expensive than current LWR costs (or utilities will not buy nuclear plants in the near future) and also be highly reliable. The fundamental differences between LWRs and LMFBRs are discussed and recommendations are made for making the most of these differences to design a superior breeder plant that can sell in the future, opening the way to U.S. utilities becoming self-sufficient for fuel supply for centuries

  19. Public regulation of nuclear plants

    Burtheret, M.; Cormis, de

    1980-01-01

    The construction and operation of nuclear plants are subject to a complex system of governmental administration. The authors list the various governmental authorisations and rules applicable to these plants. In the first part, they describe the national regulations which relate specifically to nuclear plants, and emphasize the provisions which are intended to ensure the safety of the installations and the protection of the public against ionizing radiation. However, while the safety of nuclear plants is a major concern of the authorities, other interests are also protected. This is accomplished by various laws or regulations which apply to nuclear plants as well as other industrial installations. The duties which these texts, and the administrative practice based thereon, impose on Electricite de France are covered in the second part [fr

  20. Modifications to nuclear power plants. Safety guide

    2004-01-01

    This Safety Guide was prepared under the IAEA's programme for safety standards for nuclear power plants. It supplements Section 7 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation, which establishes the safety requirements for the modification of nuclear power plants. Reasons for carrying out modifications to nuclear power plants may include: (1) maintaining or strengthening existing safety provisions and thus maintaining consistency with or improving on the current design. (2) recovering from plant faults. (3) improving the thermal performance or increasing the power rating of the plant. (4) increasing the maintainability of the plant, reducing the radiation exposure of personnel or reducing the costs of plant maintenance. And (5) extending the design life of the plant. Most modifications, made on the basis of operating experience, are intended to improve on the design or to improve operational performance and flexibility. Some are rendered necessary by new regulatory requirements, ageing of the plant or obsolescence of equipment. However, the benefits of regularly updating the plant design can be jeopardized if modifications are not kept under rigorous control throughout the lifetime of the plant. The need to reduce costs and improve efficiency, in combination with changes to the structure of the electricity generation sector of the economy in many countries, has led many companies to make changes in the structure of the operating organization for nuclear power plants. Whatever the reason for such organizational changes, consideration should be given to the effects of those changes with the aim of ensuring that they would have no impacts that would compromise the safety of the plant. The objective of this Safety Guide is to provide guidance and recommendations on controlling activities relating to modifications at nuclear power plants in order to reduce risk and to ensure that the configuration of the plant is at all times under

  1. Modifications to nuclear power plants. Safety guide

    2007-01-01

    This Safety Guide was prepared under the IAEA's programme for safety standards for nuclear power plants. It supplements Section 7 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation, which establishes the safety requirements for the modification of nuclear power plants. Reasons for carrying out modifications to nuclear power plants may include: (1) maintaining or strengthening existing safety provisions and thus maintaining consistency with or improving on the current design. (2) recovering from plant faults. (3) improving the thermal performance or increasing the power rating of the plant. (4) increasing the maintainability of the plant, reducing the radiation exposure of personnel or reducing the costs of plant maintenance. And (5) extending the design life of the plant. Most modifications, made on the basis of operating experience, are intended to improve on the design or to improve operational performance and flexibility. Some are rendered necessary by new regulatory requirements, ageing of the plant or obsolescence of equipment. However, the benefits of regularly updating the plant design can be jeopardized if modifications are not kept under rigorous control throughout the lifetime of the plant. The need to reduce costs and improve efficiency, in combination with changes to the structure of the electricity generation sector of the economy in many countries, has led many companies to make changes in the structure of the operating organization for nuclear power plants. Whatever the reason for such organizational changes, consideration should be given to the effects of those changes with the aim of ensuring that they would have no impacts that would compromise the safety of the plant. The objective of this Safety Guide is to provide guidance and recommendations on controlling activities relating to modifications at nuclear power plants in order to reduce risk and to ensure that the configuration of the plant is at all times under

  2. Space nuclear reactor power plants

    Buden, D.; Ranken, W.A.; Koenig, D.R.

    1980-01-01

    Requirements for electrical and propulsion power for space are expected to increase dramatically in the 1980s. Nuclear power is probably the only source for some deep space missions and a major competitor for many orbital missions, especially those at geosynchronous orbit. Because of the potential requirements, a technology program on space nuclear power plant components has been initiated by the Department of Energy. The missions that are foreseen, the current power plant concept, the technology program plan, and early key results are described

  3. Intelligent distributed control for nuclear power plants

    Klevans, E.H.; Edwards, R.M.; Ray, A.; Lee, K.Y.; Garcia, H.E.: Chavez, C.M.; Turso, J.A.; BenAbdennour, A.

    1991-01-01

    In September of 1989 work began on the DOE University Program grant DE-FG07-89ER12889. The grant provides support for a three year project to develop and demonstrate Intelligent Distributed Control (IDC) for Nuclear Power Plants. The body of this Second Annual Technical Progress report covers the period from September 1990 to September 1991. It summarizes the second year accomplishments while the appendices provide detailed information presented at conference meetings. These are two primary goals of this research. The first is to combine diagnostics and control to achieve a highly automated power plant as described by M.A. Schultz, a project consultant during the first year of the project. This philosophy, as presented in the first annual technical progress report, is to improve public perception of the safety of nuclear power plants by incorporating a high degree automation where greatly simplified operator control console minimizes the possibility of human error in power plant operations. A hierarchically distributed control system with automated responses to plant upset conditions is the focus of our research to achieve this goal. The second goal is to apply this research to develop a prototype demonstration on an actual power plant system, the EBR-II steam plant

  4. Nuclear power plant operator licensing

    1997-01-01

    The guide applies to the nuclear power plant operator licensing procedure referred to the section 128 of the Finnish Nuclear Energy Degree. The licensing procedure applies to shift supervisors and those operators of the shift teams of nuclear power plant units who manipulate the controls of nuclear power plants systems in the main control room. The qualification requirements presented in the guide also apply to nuclear safety engineers who work in the main control room and provide support to the shift supervisors, operation engineers who are the immediate superiors of shift supervisors, heads of the operational planning units and simulator instructors. The operator licensing procedure for other nuclear facilities are decided case by case. The requirements for the basic education, work experience and the initial, refresher and complementary training of nuclear power plant operating personnel are presented in the YVL guide 1.7. (2 refs.)

  5. Nuclear Power Plant Simulation Game.

    Weiss, Fran

    1979-01-01

    Presents a nuclear power plant simulation game which is designed to involve a class of 30 junior or senior high school students. Scientific, ecological, and social issues covered in the game are also presented. (HM)

  6. Public attitudes to nuclear power

    Hill, John.

    1981-06-01

    The public is influenced against nuclear power by fear of a large accident, fear of radiation, worry about nuclear waste, and by the fact that it is a symbol of the bureaucratic, impersonal aspects of industrialized society. The nuclear industry must do several things to overcome this public concern. It must be more articulate in speaking to the public in a language the public understands and not in nuclear jargon; it must be strictly accurate and truthful in all statements, and if it believes the case it is putting forward is sound, it should defend the proposal and not promise to do even more to buy off criticism. Acceptance of nuclear power will either have to wait until the energy situation is desperate, or until the industry puts enough effort into presenting and defending its case to convince all objective people

  7. Elecnuc. Nuclear power plants worldwide

    1998-01-01

    This small folder presents a digest of some useful information concerning the nuclear power plants worldwide and the situation of nuclear industry at the end of 1997: power production of nuclear origin, distribution of reactor types, number of installed units, evolution and prediction of reactor orders, connections to the grid and decommissioning, worldwide development of nuclear power, evolution of power production of nuclear origin, the installed power per reactor type, market shares and exports of the main nuclear engineering companies, power plants constructions and orders situation, evolution of reactors performances during the last 10 years, know-how and development of nuclear safety, the remarkable facts of 1997, the future of nuclear power and the energy policy trends. (J.S.)

  8. Robotics for nuclear power plants

    Shiraiwa, Takanori; Watanabe, Atsuo; Miyasawa, Tatsuo

    1984-01-01

    Demand for robots in nuclear power plants is increasing of late in order to reduce workers' exposure to radiations. Especially, owing to the progress of microelectronics and robotics, earnest desire is growing for the advent of intellecturized robots that perform indeterminate and complicated security work. Herein represented are the robots recently developed for nuclear power plants and the review of the present status of robotics. (author)

  9. Robotics for nuclear power plants

    Shiraiwa, Takanori; Watanabe, Atsuo; Miyasawa, Tatsuo

    1984-10-01

    Demand for robots in nuclear power plants is increasing of late in order to reduce workers' exposure to radiations. Especially, owing to the progress of microelectronics and robotics, earnest desire is growing for the advent of intellecturized robots that perform indeterminate and complicated security work. Herein represented are the robots recently developed for nuclear power plants and the review of the present status of robotics.

  10. Decommissioning of nuclear power plants

    Vollradt, J.

    1977-01-01

    A survey of the main questions of decommissioning of nuclear power plants will be given in the sight of German utilities (VDEW-Working group 'Stillegung'). The main topics are: 1) Definitions of decommissioning, entombment, removal and combinations of such alternatives; 2) Radioactive inventory (build up and decay); 3) Experience up to now; 4) Possibilities to dismantle are given by possibility to repair nuclear power plants; 5) Estimated costs, waste, occupational radiation dose; 6) German concept of decommissioning. (orig./HK) [de

  11. PV power plants

    NONE

    2012-07-01

    Within the international seminar of the Ostbayerisches Technologie-Transfer-Institut e.V. (OTTI) at 11th June, 2012 in Munich (Federal Republic of Germany), the following lectures were held: (1) Technical due diligence (Dietmar Obst); (2) Certification / rating system for large PV plants (Robert Pfatischer); (3) O and M requirements (Lars Rulf); (4) IR photography for large scale systems (Bernhard Weinreich); (5) New market models for PV systems - direct marketing and sales of PV electricity (Martin Schneider); (6) Needs and benefits for plant certification for grid connection and operation (Christoph Luetke-Lengerich); (7) Lare volume module testing / Screening in the field and workshop (Semir Merzoug); (8) Dismantling costs of large scale PV plants (Siegfried Schimpf).

  12. Inertial fusion commercial power plants

    Logan, B.G.

    1994-01-01

    This presentation discusses the motivation for inertial fusion energy, a brief synopsis of five recently-completed inertial fusion power plant designs, some general conclusions drawn from these studies, and an example of an IFE hydrogen synfuel plant to suggest that future fusion studies consider broadening fusion use to low-emission fuels production as well as electricity

  13. Emergency power systems at nuclear power plants

    1991-01-01

    This Safety Guide was prepared as part of the Nuclear Safety Standards programme for establishing Codes and Safety Guides relating to nuclear power plants (NPPs). The first edition of the present Safety Guide was developed in the early 1980s. The text has now been brought up-to-date, refined in several details and amended to include non-electrical diverse and independent power sources. This Guide applies to NPP for which the total power supply comprises a normal power supply and an emergency power supply (EPS), which may be electrical or a combination of electrical and non-electrical. The Guide provides general guidance for all types of EPS and specific guidance on the design safety requirements and the features of the electrical and non-electrical portions of the EPS. 9 figs, 2 tabs

  14. Slovak power stations, Nuclear Power Plants Mochovce (Annual report 1997)

    1998-01-01

    A brief account of activities carried out by the Nuclear power plants Mochovce in 1997 is presented. These activities are reported under the headings: (1) Director's foreword; (2) Power plant management; (3) Highlights of 1997; (4) Capital construction; (5) Nuclear safety; (6) Radiation safety; (7) Work safety and health protection at work; (9) Fire protection; (10) Units upgrading - safety measures; (11) Maintenance; (12) Operation; (13) Environmental impacts of operations; (14) List of balances; (15) Human sources; (16) International co-operation; (17) Public relations

  15. Organization patterns of PWR power plants

    Leicman, J.

    1980-01-01

    Organization patterns are shown for the St. Lucia 1, North Anna, Sequoyah, and Beaver Valley nuclear power plants, for a typical PWR power plant in the USA, for the Biblis/RWE-KWU nuclear power plants and for a four-unit nuclear power plant operated by Electricite de France as well as for the Loviisa power plant. Organization patterns are also shown for relatively independent and non-independent nuclear power plants according to IAEA recommendations. (J.P.)

  16. Low-power wind plants

    Kovalenko, V.I.; Shevchenko, Yu.V.; Shikhajlov, N.A.; Kokhanevich, V.P.; Tanan, G.L.

    1993-01-01

    Design peculiarities, as well as the prospects of development and introduction of the low-power (from 0.5 up to 4 kW) wind power plants (WPP) are considered. The variants of WPP with vertical and horizontal rotation axis are described. The data characterizing cost and structure of expenditures on WPP manufacture and operation are given

  17. Energy sources and power plants

    Schulz, Detlef; Schulz, Karen

    2013-01-01

    Energy is obtained from various energy sources (coal, petroleum, natural gas, nuclear fuels, wind energy, solar energy, hydro power, biomass, geothermal energy). These differ in each case with respect to their availability, methods of their production and the required power plant technologies. As technologies of the future fuel cells and nuclear fusion are traded. [de

  18. Space power plants

    Khudyakov, S. A.

    1985-05-01

    Power generators in space are examined. A semiconducting photoelectric converter (FEP) which converts the energy of solar radiation directly into electrical energy is discussed. The operating principle of an FEP is based on the interaction of solar light with a crystal semiconductor, in the process of which the photons produce free electrons, carriers of an electrical charge, in the crystal. Areas with a strong electrical field created specially under the effect of the p-n junction trap the freed electrons and divide them in such a fashion that a current and corresponding electrical power appear in the load circuit. The absorption of light in metals and pure semiconductors is outlined.

  19. Final report of the programme on the safety of WWER and RBMK nuclear power plants. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

    1999-05-01

    The review of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants focuses on the wide scope of the activities aimed at identifying safety deficiencies, ranking their importance on the results of safety improvement programmes and on areas where future work is necessary. The information in the report reflects to a large extent, the situation as it stood when individual IAEA tasks actually took place. It deals with the IAEA activities and it discusses selected safety issues and safety review results as they apply to each reactor type. The results, recommendations and conclusions resulting from the IAEA Programme are intended to assist national decision makers who have the sole responsibilities for the regulation and safety operation of their nuclear power plants

  20. Nuclear power and public opinion

    Kazanikov, I.A.; Klykov, S.A.

    2000-01-01

    The public opinion on Nuclear Power is not favorable. A purposeful work with public perception is necessary. One way to create a positive image of the nuclear industry is to improve public radiological education. This challenge can be resolved in the close cooperation with state school and preschool education. The formation about nuclear power should be simple and symbolical. Our society can be divided into 4 parts which can be called as target groups: First group - People from the nuclear industry with special education working at nuclear facilities or related to the industry. Second group - People working in the fields connected with nuclear power. Third group - People not related to nuclear power or even with negative impression to the industry. This group is the largest and the work required is the most difficult. Fourth group - The number of this group's members is the least, but it has strong influence on public opinion. 'Greens' and a broad spectrum of ecological organizations can be included in this group. (Authors)

  1. Nuclear power and the public

    Mueller, W.D.

    1977-01-01

    On the occasion of the 1976 Assembly of the Members of the Deutsches Atomforum at Bonn the Editor-in-chief of the atomwirtschaft, W.D. Mueller, was awarded the Karl Winnacker Prize for special services rendered to promote public understanding of the peaceful uses of atomic energy. In his speech the prizewinner discussed basic problems of the relations between the public and nuclear power. In his analysis he pointed out that the nuclear community itself was to blame for much of the deterioration of relations compared with the early years of nuclear power, because it had offered factual information only as instruction and education. Nuclear power would be accepted by the public only if confidence could be restored in the men working for the utilization of nuclear power. This could not be done by public relations activities only but, above all, by a dedicated effort of all those responsible for the uses of nuclear energy in science and technology, in the utilities and in industry, and also in government organizations. (orig.) [de

  2. Safety assessment of emergency power systems for nuclear power plants

    1992-01-01

    This publication is intended to assist the safety assessor within a regulatory body, or one working as a consultant, in assessing the safety of a given design of the emergency power systems (EPS) for a nuclear power plant. The present publication refers closely to the NUSS Safety Guide 50-SG-D7 (Rev. 1), Emergency Power Systems at Nuclear Power Plants. It covers therefore exactly the same technical subject as that Safety Guide. In view of its objective, however, it attempts to help in the evaluation of possible technical solutions which are intended to fulfill the safety requirements. Section 2 clarifies the scope further by giving an outline of the assessment steps in the licensing process. After a general outline of the assessment process in relation to the licensing of a nuclear power plant, the publication is divided into two parts. First, all safety issues are presented in the form of questions that have to be answered in order for the assessor to be confident of a safe design. The second part presents the same topics in tabulated form, listing the required documentation which the assessor has to consult and those international and national technical standards pertinent to the topics. An extensive reference list provides information on standards. 1 tab

  3. Power plant simulation

    Hacking, D [Marconi Simulation (United Kingdom)

    1992-09-01

    Over many years in the field of simulation Marconi has developed and adopted a number of procedures and methodologies for the management, design and development of an extensive range of training equipment. This equipment encompasses desktop computer-based training systems, generic training devices. The procurement of a training simulator is clearly dictated by the perceived training requirement or problem. Also, it should preferably involve or follow a detailed training needs analysis. Although the cost benefits of training are often difficult to quantify, a simulator is frequently easier to justify if plant familiarisation and training can be provided in advance of on-the-job experience. This is particularly true if the target operators have little hands-on experience of similar plant either in terms of processes or the operator interface. (author).

  4. Organizing nuclear power plant operation

    Adams, H.W.; Rekittke, K.

    1987-01-01

    With the preliminary culmination in the convoy plants of the high standard of engineered safeguards in German nuclear power plants developed over the past twenty years, the interest of operators has now increasingly turned to problems which had not been in the focus of attention before. One of these problems is the organization of nuclear power plant operation. In order to enlarge the basis of knowledge, which is documented also in the rules published by the Kerntechnischer Ausschuss (Nuclear Technology Committee), the German Federal Minister of the Interior has commissioned a study of the organizational structures of nuclear power plants. The findings of that study are covered in the article. Two representative nuclear power plants in the Federal Republic of Germany were selected for the study, one of them a single-unit plant run by an independent operating company in the form of a private company under German law (GmbH), the other a dual-unit plant operated as a dependent unit of a utility. The two enterprises have different structures of organization. (orig.) [de

  5. TVA's nuclear power plant experience

    Willis, W.F.

    1979-01-01

    This paper reviews TVA's nuclear power plant design and construction experience in terms of schedule and capital costs. The completed plant in commercial operation at Browns Ferry and six additional plants currently under construction represent the nation's largest single commitment to nuclear power and an ultimate investment of $12 billion by 1986. The presentation is made in three separate phases. Phase one will recapitulate the status of the nuclear power industry in 1966 and set forth the assumptions used for estimating capital costs and projecting project schedules for the first TVA units. Phase two describes what happened to the program in the hectic early 1979's in terms of expansion of scope (particularly for safety features), the dramatic increase in regulatory requirements, vendor problems, stretchout of project schedules, and unprecedented inflation. Phase three addresses the assumptions used today in estimating schedules and plant costs for the next ten-year period

  6. Prospects for power plant technology

    Schilling, H.D.

    1993-01-01

    Careful conservation of resources in the enlarged context of the rational utilization of energy, the environment and capital will determine future power plant technology. The mainstays will be the further development of power plant concepts based on fossil (predominantly coal) and nuclear fuels; world-wide, also regenerative and CO 2 -free hydro-electric power will play a role. Rapid conversion of the available potential requires clear, long-term stable and reliable political framework conditions for the release of the necessary entrepreneurial forces. (orig.) [de

  7. Nuclear power plant V-2

    1998-01-01

    The nuclear power plant Bohunice V -2 is briefly described. This NPP consists from two reactor units. Their main time characteristics are (Reactor Unit 1, Reactor Unit 2): beginning of construction - December 1976; first controlled reactor power - 7 August 1984, 2 August 1985; connection to the grid - 20 August 1984, 9 August 1985; commercial operation - 14 February 1985, 18 December 1985. This leaflet contains: NPP V-2 construction; Major technological equipment [WWER 440 V230 type reactor; Nuclear Power plant operation safety (Safety barriers; Safety systems [Active safety systems, Passive safety systems]); Centralized heat supply system; Scheme of Bohunice V-2 NPP and technical data

  8. Simulation technology for power plants

    Kuwabara, Kazuo; Yanai, Katsuya.

    1988-01-01

    In the simulation of nuclear power stations, there are the simulation for the training of plant operation, the plant simulation for analyzing the operation of an electric power system, the simulation for controlling a core, the simulation for the safety analysis of reactors, the simulation for the design analysis of plants and so on as the typical ones. The outline and the technical features of these simulations are described. With the increase of capacity and complexity of thermal power plants, recently the automation of operation has advanced rapidly. The chance of starting up and stopping plants by operators themselves is few, and the chance of actually experiencing troubles also is few as the reliability of plants improved. In order to maintain the ability of coping with plant abnormality, an operation supporting system is strongly demanded. Operation training simulators and used widely now, and there are the simulators for analysis, those of replica type, those of versatile compact type and so on. The system configuration, modeling techniques, training function and others of the replica type are explained. In hydroelectric plants, the behavior of water in penstocks, the characteristics of water turbines, the speed control system for water turbines and the characteristics of generators become the main subjects of simulation. These are described. (Kako, I.)

  9. ALARA at nuclear power plants

    Baum, J.W.

    1991-01-01

    Implementation of the ALARA principle at nuclear power plants presents a continuing challenge for health physicists at utility corporate and plant levels, for plant designers, and for regulatory agencies. The relatively large collective doses at some plants are being addressed through a variety of dose reduction techniques. Initiatives by the ICRP, NCRP, NRC, INPO, EPRI, and BNL ALARA Center have all contributed to a heightened interest and emphasis on dose reduction. The NCRP has formed Scientific Committee 46-9 which is developing a report on ALARA at Nuclear Power Plants. It is planned that this report will include material on historical aspects, management, valuation of dose reduction ($/person-Sv), quantitative and qualitative aspects of optimization, design, operational considerations, and training. The status of this work is summarized in this report

  10. Quality assurance for safety in nuclear power plants and other nuclear installations. Code and safety guides Q1-Q14. A publication within the NUSS programme

    1996-01-01

    The code provides the basic requirements for establishing and implementing quality assurance programmes for the stages of siting, design, construction, commissioning, operation and decommissioning of nuclear power plants. These basic requirements apply to all individuals and organizations, including designers, suppliers, constructors, manufacturers and operators. The basic quality assurance requirements presented in this Code also apply, with appropriate modifications, to nuclear installations other than nuclear power plants

  11. Fusion power plant availability study

    Ladra, D.; Sanguinetti, G.P.; Stube, E.

    2001-01-01

    The consideration of fusion as an alternative energy source will need to demonstrate that Fusion Power Plant (FPP) design, operating and maintenance characteristics meet the electrical market requirements forecast for the second half of this century. Until now, fusion has been developed in the framework of research and development programmes following natural technological trends. To bring a greater sense of realism to commercial viability and to guarantee that technology-driven fusion development responds to the demands of the market, a conceptual study of future commercial FPPs has been performed with a Power Plant Availability (PPA) study aimed at identifying the aspects affecting the availability and generating costs of FPPs. EFET, who has also been involved in the study, can visualise it from two different points of view; that of the industry (ANSALDO, IBERTEF, SIEMENS, NNC) and that of the utilities (BELGATOM, FRAMATOME, FORTUM). The work carried out covered the following points: socio-economic forecasting; safety and licensing; operation and maintenance; waste and decommissioning; availability and reliability. The following are the most relevant findings, conclusions and recommendations for all these aspects: Demonstrate definitively that the physical principles of nuclear fusion have been validated by means of experiments; Establish a European Industrial Group to support the demonstration phases; Create the financial and contracting framework required to construct these installations. Secure the necessary budgets for the European Union's 5th and 6th Research Programmes. Look for supplementary long term financing sources; The existing Regulatory Bodies should combine to form a single Working Group with responsibility for fusion reactor safety and licensing activities, working on the harmonisation of the regulatory processes, developing FPP safety criteria and guidelines and reviewing industry standards; To be competitive, FPPs should have high availability

  12. RBMK fuel channel integrity. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

    1999-01-01

    The fuel channel integrity in the RBMK NPPs is an issue of high safety concern. To date, three single fuel channel ruptures have occurred. Fuel channel rupture results in release of radioactivity to the reactor cavity and may lead to a release of radioactivity to the environment if the confinement safety system does not function properly. A multiple fuel channel rupture exceeding the venting capacity of the reactor cavity overpressure protection system poses a major impact on the plant safety. Further, due to incorrect prediction at the design stage the gas gap between the fuel channel pressure tube and the graphite blocks closes after approximately 17 years of plant operation. There is no safety justification available for the continued plant operation in this condition and the reactors are being retubed to avoid operation in this out of design condition, which may have negative impact on the fuel channel integrity. The loss of the mechanical integrity of fuel channel pressure tubes is a major safety concern for RBMK reactors since it may lead to overpressurization of the reactor cavity and consequently develop into a severe accident. In this report, information on the main design features of the RBMK reactor related to the fuel channel integrity is given. Further, detailed information on the fuel channel pressure tube and the graphite blocks with respect to their design, manufacture, in-service inspection, operating experience, ageing behaviour including degradation mechanisms is discussed in detail. The behaviour of the system fuel channel-graphite core including the corrective actions developed and implemented is discussed. Both normal operating conditions and accident conditions are addressed, considering also the gas gap closure process and its impact. The report also covers the fuel channel ducts. It is concluded in the report that for RBMK-1000 reactors and the adopted retubing strategy, limited local gas gap closure occurs at the time of pressure tube

  13. Ocean power plants

    Mazurkiedicz, B.; Sliwa, B.

    1982-01-01

    Plans are examined for OTES of close and open cycles. Examples of design of TO are presented. Main design elements of the OTES are indicated and their arrangement. The OTES can be realized even now with comparatively small capital investments. Searches are made for solutions which would make it possible to construct the OTES and not in tropical regions, i.e., with very small temperature differences. The studies indicated that with a difference of temperatures 4.5/sup 0/C and temperature of the thermal water 5.5/sup 0/C, it is possible to build OTES with power 100 MW. With difference in temperature 5/sup 0/C, the power will reach 130 MW.

  14. Submarine nuclear power plant

    Enohara, Masami; Araragi, Fujio.

    1980-01-01

    Purpose: To provide a ballast tank, and nuclear power facilities within the containment shell of a pressure resistance structure and a maintenance operator's entrance and a transmission cable cut-off device at the outer part of the containment shell, whereby after the construction, the shell is towed, and installed by self-submerging, and it can be refloated for repairs by its own strength. Constitution: Within a containment shell having a ballast tank and a pressure resisting structure, there are provided nuclear power facilities including a nuclear power generating chamber, a maintenance operator's living room and the like. Furthermore, a maintenance operator's entrance and exit device and a transmission cable cut-off device are provided within the shell, whereby when it is towed to a predetermined a area after the construction, it submerges by its own strength and when any repair inspection is necessary, it can float up by its own strength, and can be towed to a repair dock or the like. (Yoshihara, H.)

  15. Chemistry in power plants 2011

    2011-01-01

    Within the VGB Powertech conference from 25th to 27th October, 2011, in Munich (Federal Republic of Germany), the following lectures and poster contributions were presented: (1) The revised VGB standard for water-steam-cycle Chemistry; (2) Switchover from neutral operation to oxygen treatment at the power station Stuttgart-Muenster of EnBW Kraftwerke AG; (3) Steam contamination with degradation products of organic matters present in the feedwater of the Lanxess-Rubber cogeneration plant; (4) Laboratory scale on-line noble metal deposition experiments simulating BWR plant conditions; (5) Building a new demin installation for the power plant EPZ in Borssele; (6) Replacement of the cooling tower installations in the nuclear power plant Goesgen-Daenien AG; (7) Aging of IEX resins in demin plants - Cost optimisation by adaptation of regenerants; (8) The largest DOW trademark EDI System at a combined cycled plant in Europe; (9) Upgrading river Main water to boiler feed water - Experiences with ultrafiltration; (10) Experiences with treatment of the water-steam-cycle in the RDF power plant Nehlsen Stavenhagen with film-forming amines; (11) Comparative modelling of the bubbles thermal collapse and cavitations for estimation of bubbles collapse influence; (12) Overcoming the steam quality - issues from an HRSG for the production of process steam; (13) Legionella - new requirements for power plant operation; (14) How the right chemistry in the FGD helps to improve the removal in the waste water treatment plant; (15) High efficiency filtration in dry/semi-dry FGD plants; (16) Expanding the variety of renewable fuels in the biomass power plant Timelkam using the chemical input control; (17) Corrosion, operating experiences and process improvements to increase the availability and operating time of the biomass power plant Timelkam; (18) The influence of temperature on the measurement of the conductivity of highly diluted solutions; (19) A multiparameter instrumentation approach

  16. Financing Solar Thermal Power Plants

    Kistner, Rainer [National Renewable Energy Lab. (NREL), Golden, CO (United States); Price, Henry W. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    1999-04-14

    The commercialization of concentrating solar power technology took a major step forward in the mid 1980s and early 1990s with the development of the SEGS plants in California. Over the years they have proven that parabolic trough power technologies are the most cost-effective approach for commercial scale solar power generation in the sunbelt countries of the world. However, the question must be asked why no additional solar power plants have been build following the bankruptcy of the developer of the SEGS projects, LUZ International Limited. Although many believe the SEGS projects were a success as a result of parabolic trough technology they employ, in truth, the SEGS projects were developed simply because they represented an attractive opportunity for investors. Simply stated, no additional projects have been developed because no one has been able to put together a similarly attractive financial package to potential investors. More than $1.2 billion in private capital was raised in debt and equity financing for the nine SEGS plants. Investors and bankers who make these investments are the real clients for solar power technologies. They are not interested in annual solar to electric efficiencies, but in risk, return on investments, and coverage ratios. This paper will take a look at solar power projects from the financier’s perspective. The challenge in moving forward is to attract private investors, commercial lenders, and international development agencies and to find innovative solutions to the difficult issues that investment in the global power market poses for solar power technologies.

  17. Financing Solar Thermal Power Plants

    Price, Henry W.; Kistner, Rainer

    1999-01-01

    The commercialization of concentrating solar power technology took a major step forward in the mid 1980s and early 1990s with the development of the SEGS plants in California. Over the years they have proven that parabolic trough power technologies are the most cost-effective approach for commercial scale solar power generation in the sunbelt countries of the world. However, the question must be asked why no additional solar power plants have been build following the bankruptcy of the developer of the SEGS projects, LUZ International Limited. Although many believe the SEGS projects were a success as a result of parabolic trough technology they employ, in truth, the SEGS projects were developed simply because they represented an attractive opportunity for investors. Simply stated, no additional projects have been developed because no one has been able to put together a similarly attractive financial package to potential investors. More than $1.2 billion in private capital was raised in debt and equity financing for the nine SEGS plants. Investors and bankers who make these investments are the real clients for solar power technologies. They are not interested in annual solar to electric efficiencies, but in risk, return on investments, and coverage ratios. This paper will take a look at solar power projects from the financier's perspective. The challenge in moving forward is to attract private investors, commercial lenders, and international development agencies and to find innovative solutions to the difficult issues that investment in the global power market poses for solar power technologies

  18. Financing solar thermal power plants

    Kistner, R.; Price, H.

    1999-01-01

    The commercialization of concentrating solar power technology took a major step forward in the mid 1980s and early 1990s with the development of the SEGS plants in California. Over the years they have proven that parabolic trough power technologies are the most cost-effective approach for commercial scale solar power generation in the sunbelt countries of the world. However, the question must be asked why no additional solar power plants have been built following the bankruptcy of the developer of the SEGS projects, LUZ International Limited. Although many believe the SEGS projects were a success as a result of parabolic trough technology they employ, in truth, the SEGS projects were developed simply because they represented an attractive opportunity for investors. Simply states, no additional projects have been developed because no one has been able to put together a similarly attractive financial package to potential investors. More than $1.2 billion in private capital was raised in debt and equity financing for the nine SEGS plants. Investors and bankers who make these investments are the real clients for solar power technologies. They are not interested in annual solar to electric efficiencies, but in risk, return on investments, and coverage ratios. This paper will take a look at solar power projects form the financier's perspective. The challenge in moving forward is to attract private investors, commercial lenders, and international development agencies and to find innovative solutions to the difficult issues that investment in the global power market poses for solar power technologies

  19. Thermal Power Plant Performance Analysis

    2012-01-01

    The analysis of the reliability and availability of power plants is frequently based on simple indexes that do not take into account the criticality of some failures used for availability analysis. This criticality should be evaluated based on concepts of reliability which consider the effect of a component failure on the performance of the entire plant. System reliability analysis tools provide a root-cause analysis leading to the improvement of the plant maintenance plan.   Taking in view that the power plant performance can be evaluated not only based on  thermodynamic related indexes, such as heat-rate, Thermal Power Plant Performance Analysis focuses on the presentation of reliability-based tools used to define performance of complex systems and introduces the basic concepts of reliability, maintainability and risk analysis aiming at their application as tools for power plant performance improvement, including: ·         selection of critical equipment and components, ·         defini...

  20. Managing the first nuclear power plant project

    2007-05-01

    Energy is essential for national development. Nearly every aspect of development - from reducing poverty and raising living standards to improving health care, industrial and agricultural productivity - requires reliable access to modern energy resources. States may have different reasons for considering starting a nuclear power project to achieve their national energy needs, such as: lack of available indigenous energy resources, the desire to reduce dependence upon imported energy, the need to increase the diversity of energy resources and/or mitigation of carbon emission increases. The start of a nuclear power plant project involves several complex and interrelated activities with long duration. Experience shows that the time between the initial policy decision by a State to consider nuclear power up to the start of operation of its first nuclear power plant is about 10 to 15 years and that before specific project management can proceed, several key infrastructure issues have to be in place. The proper management of the wide scope of activities to be planned and implemented during this period represents a major challenge for the involved governmental, utility, regulatory, supplier and other supportive organizations. The main focus is to ensure that the project is implemented successfully from a commercial point of view while remaining in accordance with the appropriate engineering and quality requirements, safety standards and security guides. This publication is aimed at providing guidance on the practical management of a first nuclear power project in a country. There are many other issues, related to ensuring that the infrastructure in the country has been prepared adequately to ensure that the project will be able to be completed, that are only briefly addressed in this publication. The construction of the first nuclear power plant is a major undertaking for any country developing a nuclear power programme. Worldwide experience gained in the last 50 years

  1. Anticipated transients without scram for WWER reactors. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

    1999-12-01

    Anticipated transients without scram (ATWS) are anticipated operational occurrences followed by the failure of one reactor scram function. Current international practice requires that the capability of pressurized water reactors (PWRs) to cope with ATWS be demonstrated following a systematic evaluation of plants' defence in depth. Countries operating PWRs require design consideration of ATWS events on a deterministic basis. The regulatory requirements may concern either specific mitigating systems or acceptable plant performance during these events. The prevailing international practice for performing transient analysis of ATWS for licensing is the best estimate approach. Available transient analyses of ATWS events indicate that WWER reactors, like PWRs, have the tendency to shut themselves down if the inherent nuclear feedback is sufficiently negative. Various control and limitation functions of the WWER plants also provide a degree of defence against ATWS. However, for most WWER plants, complete and systematic ATWS analyses have yet to be submitted for rigorous review by the regulatory authorities and preventive or mitigative measures have not been established. In addition, it has also been recognized that plant behaviour in case of ATWS also relies on certain system functions (use of pressurizer safety valves for liquid discharge, availability of steam dump valve to both the condenser (BRU-K) and the atmosphere (BRU-A) for secondary side pressure control, and others) which have been identified as safety issues and need to be qualified for accident conditions. In all countries operating WWERs, the need for ATWS investigations is recognized and reflected in the safety improvement programmes. ATWS analysis for WWERs is not required for the licensing process in Bulgaria, the Czech Republic (with the exception of the Temelin nuclear power plant) and Russia. Design consideration of ATWS is required if expert assessments of probabilistic safety assessment (PSA) results

  2. Nuclear power plant diagnostics

    Hollo, E.; Siklossy, P.

    1982-01-01

    The cooling circuit vibration diagnostic system of the Block 1 of the Paks nuclear power station is described. The automatic online vibration monitoring system consisting presently of 42 acceleration sensors and 9 pressure fluctuation sensors, which could be extended, performs both global and local inspection of the primary cooling circuit and its components. The offline data processing system evaluates the data for failure mode analysis. The software under development will be appropriate for partial preliminary identification of failure reasons during their initial phases. The installation experiences and the preliminary results during the hot operational testing of Block 1 are presented. (Sz.J.)

  3. Nuclear power plants

    Usui, Eizo.

    1981-01-01

    Purpose: To prevent boiling of saturated water in the drain tank of a humidity separator by charging cooling water in the drain tank upon power decrease of a turbine. Constitution: Saturated water is separated from high pressure turbine exhausts in a humidity separator and stored in a drain tank. The saturated water in the drain tank is controlled to a constant level and the excess water is sent to a condensator and a feedwater heater. A cooling water feed pipe is branched as a cooling water feed pipe from the exhaust side of a reactor feedwater pump and connected by way of a closing valve to a spray nozzle provided in the drain tank. While the closing valve is usually closed to keep the water level constant in the drain tank, the closing valve is opened upon sudden decrease in the turbine power to charge the condensates by way of the cooling water feed pipe to the drain tank. Thus, the saturated water is mixed with the dondensates and the temperature is lowered to prevent boiling of the saturated water. (Kawakami, Y.)

  4. Public attitudes to nuclear power

    Margerison, T.A.

    1988-01-01

    The British public is very poorly informed about nuclear power. 55 % express concern about it, but few can explain why. Some of the reasons given are extraordinary: 37 % of the public think nuclear power causes acid rain which pollutes lakes and kills trees; 47 % think coal is a safer fuel for making electricity than nuclear; a quarter think natural radiation is less harmful than that from nuclear stations. And a very large number of people have greatly exaggerated views of the amount of radiation released from power stations and the harm that it is doing people. Also, a quarter of everyone asked thought that nuclear power stations make bombs as well as electricity. Most of these concerns come from the media, and in particular from television which has broadcast many programmes which are strongly anti-nuclear, often inaccurate, and usually sensational. Fortunately, the effect of these stories is less damaging than one might think. At present about 42 % of the adult British population are not in favour of nuclear power, so there is still a majority who are not against. About 44 % are positively in favour, and the remainder are not sure or have no view

  5. Life extension for German nuclear power plants

    Heller, W.

    2005-01-01

    The Federation of German Industries (BDI) commissioned a study of the ''Economic Effects of Alternative Lifetimes of Nuclear Power Plants in Germany.'' The expert organizations invited as authors were the Power Economy Institute of the University of Cologne (EWI) and Energy Environment Forecast Analysis GmbH (EEFA), Berlin. The reasons for commissioning the Study include the changed framework conditions (deregulation, CO 2 emission certificate trading, worldwide competition for resources), which have altered the energy supply situation in Europe. The findings of the Study were presented to the public by the BDI on October 26, 2005. The study deals with two scenarios of extended lifetimes for German nuclear power plants of 40 and 60 years as against the existing regulations with plant lifetimes limited to approx. 32 years. The longer service lives of plants are reflected in reduced electricity generation costs and thus may have a positive influence on electricity prices. Moreover, there would be additional growth of production together with additional jobs, all of which would add up to nearly 42,000 persons for all sectors of the economy as compared to the basic scenario. Also, CO 2 emissions could be curbed by up to 50 million tons of carbon dioxide. The Study offers ample and valid reasons in favor of extending the lifetimes of nuclear power plants. In the interest of general welfare, politics would be well advised to relax the restrictions on plant life in the course of this legislative term. (orig.)

  6. Methodology for qualification of in-service inspection systems for WWER nuclear power plants. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

    1998-03-01

    Program was initiated by IAEA in 1990 with the aim to assist the countries of Central and Eastern Europe and former Soviet Union in evaluating the safety of their first generation WWER-440/230 nuclear power plants. The main objectives were: to identify major design and operational safety issues; to establish international consensus on priorities for safety improvements; and to provide assistance in the review of the competence and and adequacy of safety improvement programs. The scope was extended in 1992 to include RBMK, WWER-440/312 and WWER-1000 plants in operation and under construction. Integrity of primary circuit is fundamental for the safe operation of any nuclear power plant. In-service inspection (ISI) in general terms and in particular, non-destructive tests (NDT) play a key role in maintaining primary circuit integrity. This report provides a methodology for qualification of ISI systems which might be used by WWER operating countries as a commonly accepted basis for further development of the necessary qualification related infrastructures. It also provides several qualification principles defining the administrative framework needed for the practical implementation of the methodology, a description of the process of qualification of an inspection system, specifying its minimum technical and documentation related requirements, as well as specific requirements with regard to the NDT procedures, equipment and personnel to be qualified and the test specimen to be used in practical trials. Finally, the report suggests an appropriate distribution of responsibilities among all the parties involved in a qualification process, based on international practice

  7. Ocean power plants

    Dembicki, E.

    1982-01-01

    In the fall of 1980 on the shores of the Hawaiian Islands, a floating laboratory of the United States was successfully introduced for testing a heat exchanger and pipes for collecting cold water of the OTES with power of 1 MW. The first American OTES N=10-40 MW should start operation in 1985. By the year 2000, ..sigma..N of the U.S. OTES should reach 10 GW. The Japanese OTES N=10-25 MW should start up in 1989. The experimental OTES N=100 KW has been in operation since October 1981 on the Nauru Island. An OTES of 2 MW is under construction. The concern Empain-Schneider is involved in planning the OTES of closed cycle in France, and the concern CGE is planning the OTES of open cycle.

  8. Maintenance of nuclear power plants

    Lashgari, Farbod.

    1995-01-01

    This paper is about maintenance of nuclear power plants. In part one, the outage management of nuclear power plants has described. Meaning of the outage and objectives of outage management is given in introduction. The necessity of a long-term outage strategy is shown in chapter one. The main parts of an outage are as follows: Planning; Preparation; Execution, Each of them and also post-outage review have been explained in the followed chapters. Part two deals with technical details of main primary components of nuclear power plant type WWER. After an introduction about WWER reactors, in each chapter first the general and detailed description of main primary components has given and then their maintenance schedules and procedures. Chapter about reactor and steam generator is related to both types of WWER-440 and WWER-1000, but chapter about reactor coolant pump has specified to WWER-1000 to be more in details.(author)

  9. Toxic releases from power plants

    Rubin, E.S.

    1999-01-01

    Beginning in 1998, electric power plants burning coal or oil must estimate and report their annual releases of toxic chemicals listed in the Toxics Release Inventory (TRI) published by the US Environmental Protection Agency (EPA). This paper identifies the toxic chemicals of greatest significance for the electric utility sector and develops quantitative estimates of the toxic releases reportable to the TRI for a representative coal-fired power plant. Key factors affecting the magnitude and types of toxic releases for individual power plants also are discussed. A national projection suggests that the magnitude of electric utility industry releases will surpass those of the manufacturing industries which current report to the TRI. Risk communication activities at the community level will be essential to interpret and provide context for the new TRI results

  10. Thermal power plants and environment

    1997-01-01

    Recent versions of the air quality models which are reviewed and approved from the Environmental Protection Agency (EPA) are analysed in favour of their application in simple and complex terrain, different meteorological conditions and modifications in the sources of pollutant emissions. Improvement of the standard methods for analysis of the risks affecting the environment from different energy sources has been carried out. The application of the newly introduced model enabled (lead to performing) risk analysis of the coal power plants compared to other types of energy sources. Detailed investigation of the risk assessment and perception from coal power plants, has been performed and applied to the Macedonian coal power plants. Introducing the concept of 'psychological pollution', a modification of the standard models and programs for risk assessment from various energy sources has been suggested (proposed). The model has been applied to REK Bitola, where statistically relevant differences in relation to the control groups have been obtained. (Original)

  11. Reliability Characteristics of Power Plants

    Zbynek Martinek

    2017-01-01

    Full Text Available This paper describes the phenomenon of reliability of power plants. It gives an explanation of the terms connected with this topic as their proper understanding is important for understanding the relations and equations which model the possible real situations. The reliability phenomenon is analysed using both the exponential distribution and the Weibull distribution. The results of our analysis are specific equations giving information about the characteristics of the power plants, the mean time of operations and the probability of failure-free operation. Equations solved for the Weibull distribution respect the failures as well as the actual operating hours. Thanks to our results, we are able to create a model of dynamic reliability for prediction of future states. It can be useful for improving the current situation of the unit as well as for creating the optimal plan of maintenance and thus have an impact on the overall economics of the operation of these power plants.

  12. Robotics for nuclear power plants

    Nakayama, Ryoichi; Kimura, Motohiko; Abe, Akira

    1993-01-01

    A continuing need exists for automatic or remote-controlled machines or robots which can perform inspection and maintenance tasks in nuclear power plants. Toshiba has developed several types of monofunctional and multi- functional robots for such purposes over the past 20 years, some of which have already been used in actual plants. This paper describes new multifunctional robots for inspection and maintenance. An inspection robot has been applied in an actual plant for two years for performance testing. Maintenance robots for grinding tasks have also been developed, which can be easily teleoperated by the operator using automatic control. These new robots are expected to be applied to actual inspection and maintenance work in nuclear power plants. (author)

  13. Nuclear power plant

    Inami, Ichiro; Kobayashi, Minoru.

    1995-01-01

    In a condensate cleanup system and a reactor water cleanup system of a BWR-type reactor, in which primary coolants flow, there is disposed a filtering and desalting device using hollow thread membrane filter and ion exchange resin for a condensate cleanup system, and using a high temperature filter made of a metal, a metal oxide or ceramics as a filtering material and a precoat filter made of a powdery ion exchange resin as a filtering material for a reactor water cleanup system. This can completely remove cruds generated in the condensate system. Since the reactor water cleanup system comprises the powdery resin precoat-type filtering and desalting device and the high temperature filter using ceramics, ionic impurities such as radioactive materials can be removed. Accordingly, cruds are not carried into the inside of the reactor, and since the radioactive concentration in the reactor water is reduced, radiation exposure upon periodical inspection can be minimized almost to zero, to attain a clean plant. (T.M.)

  14. Loviisa nuclear power plant analyzer

    Porkholm, K.; Nurmilaukas, P.; Tiihonen, O.; Haenninen, M.; Puska, E.

    1992-12-01

    The APROS Simulation Environment has been developed since 1986 by Imatran Voima Oy (IVO) and the Technical Research Centre of Finland (VTT). It provides tools, solution algorithms and process components for use in different simulation systems for design, analysis and training purposes. One of its main nuclear applications is the Loviisa Nuclear Power Plant Analyzer (LPA). The Loviisa Plant Analyzer includes all the important plant components both in the primary and in the secondary circuits. In addition, all the main control systems, the protection system and the high voltage electrical systems are included. (orig.)

  15. Operation of nuclear power plants

    Severa, P.

    1988-04-01

    The textbook for training nuclear power plant personnel is centred on the most important aspects of operating modes of WWER-440 reactors. Attention is devoted to the steady state operation of the unit, shutdown, overhaul with refuelling, physical and power start-up. Also given are the regulations of shift operation and the duties of individual categories of personnel during the shift and during the change of shifts. (Z.M.). 3 figs., 1 tab

  16. Designing nuclear power plants for improved operation and maintenance

    1996-09-01

    The purpose of this publication is to compile demonstrated, experience based design guidelines for improving the operability and maintainability of nuclear power plants. The guidelines are for use principally in the design of new nuclear power plants, but should also be useful in upgrading existing designs. The guidelines derive from the experience of operating and maintaining existing nuclear power plants as well as from the design of recent plants. In particular these guidelines are based on and consistent with both the EPRI advanced Light Water Reactor Utility Requirements Document, Volume 1, and the European Utility Requirements for LWR Nuclear Power Plants. 6 refs, 1 fig

  17. Designing nuclear power plants for improved operation and maintenance

    NONE

    1996-09-01

    The purpose of this publication is to compile demonstrated, experience based design guidelines for improving the operability and maintainability of nuclear power plants. The guidelines are for use principally in the design of new nuclear power plants, but should also be useful in upgrading existing designs. The guidelines derive from the experience of operating and maintaining existing nuclear power plants as well as from the design of recent plants. In particular these guidelines are based on and consistent with both the EPRI advanced Light Water Reactor Utility Requirements Document, Volume 1, and the European Utility Requirements for LWR Nuclear Power Plants. 6 refs, 1 fig.

  18. Building of nuclear power plant

    Saito, Takashi.

    1997-01-01

    A first nuclear plant and a second nuclear power plant are disposed in adjacent with each other in a building for a nuclear reactor. A reactor container is disposed in each of the plants, and each reactor container is surrounded by a second containing facility. A repairing chamber capable of communicating with the secondary containing facilities for both of the secondary containing facilities is disposed being in contact with the second containing facility of each plant for repairing control rod driving mechanisms or reactor incorporated-type recycling pumps. Namely, the repairing chamber is in adjacent with the reactor containers of both plants, and situated between both of the plants as a repairing chamber to be used in common for both plants. Air tight inlet/exit doors are formed to the inlets/exits of both plants of the repairing chamber. Space for the repairing chamber can be reduced to about one half compared with a case where the repairing chamber is formed independently on each plant. (I.N.)

  19. Particular intervention plan of the Civaux Nuclear Power Plant. Public version. Special provision of the organisation plan for civil protection response

    2016-04-01

    The Particular intervention plan (PPI in French) is an emergency plan which foresees the measures and means to be implemented to address the potential risks of the presence and operation of a nuclear facility. This plan is implemented and developed by the Prefect in case of nuclear accident (or incident leading to a potential accident), the impact of which extending beyond the facility perimeter. It represents a special section of the organisation plan for civil protection response (ORSEC plan). The PPI foresees the necessary measures and means for crisis management during the first hours following the accident and is triggered by the Department Prefect according to the information provided by the facility operator. Its aim is to protect the populations leaving within 10 km of the facility against a potential radiological hazard. The PPI describes: the facility, the intervention area, the protection measures for the population, the conditions of emergency plan triggering, the crisis organisation, the action forms of the different services, and the post-accident stage. This document is the public version of the Particular intervention plan of the Civaux nuclear power plant (Vienne, France)

  20. Off-shore nuclear power plant

    Nakanishi, T.

    1980-01-01

    In order to avoid losses of energy and seawater pollution an off-shore nuclear power plant is coupled with a power plant which utilizes the temperature difference between seawater and hot reactor cooling water. According to the invention the power plant has a working media loop which is separated from the nuclear power plant. The apparative equipment and the operational characteristics of the power plant are the subject of the patent. (UWI) [de

  1. Effects of Californian PRC 25500 on nuclear power plant licensing

    Hahn, F.J.

    1976-01-01

    The California Public Resources Code 25500 established the Energy Resources Conservation and Development Commission on January 7, 1976. This Act mandated that the Commission process applications for new power plants within very specific timeframes. The paper presents the intent and timing of the two-phase licensing procedure and illustrates the effect of this procedure on power plants already into the NRC licensing process and on power plants which are in the beginning of the site selection process

  2. Implications of the accident at Chernobyl for safety regulation of commercial nuclear power plants in the United Sates: Volume 2, Appendix - Public comments and their disposition: Final report

    1989-04-01

    This report was prepared by the Nuclear Regulatory Commission (NRC) staff to assess the implications of the accident at the Chernobyl nuclear power plant as they relate to reactor safety regulation for commercial nuclear power plants in the United States. The facts used in this assessment have been drawn from the US fact-finding report(NUREG-1250) and its sources. The general conclusions of the document are that there are generic lessons to be learned but that no changes in regulations are needed due to the substantial differences in the design, safety features and operation of US plants as compared to those in the USSR. Given these general conclusions, further consideration of certain specific areas is recommended by the report. These include: administrative controls over reactor regulation, reactivity accidents, accidents at low or zero power, multi-unit protection, fires, containment, emergency planning, severe accident phenomena, and graphite-moderated reactors

  3. Docommissioning of nuclear power plants

    Essmann, J.

    1981-01-01

    The German utilities operating nuclear power plants have long concerned themselves with aspects of decommissioning and for this purpose an engineering company was given a contract to study the entire spectrum of decommissioning. The results of this study have been available in autumn 1980 and it is possible to discuss all the aspects of decommissioning on a new basis. Following these results no change in the design concept of LWR nuclear power plants in operation or under construction is necessary because the techniques, necessary for decommissioning, are fully available today. The technical feasibility of decommissioning for power plants of Biblis A and KRB type has been shown in detail. The calculations of the quantity of waste produced during removal of a nuclear power plant could be confirmed and it could be determined with high procedure. The radiation dose to the decommissioning personnel is in the range of the radiation protection regulations and is in the same range as the radiation dose to the personnel within a yearly inservice inspection. (AF)

  4. Fire protection in power plants

    Penot, J.

    1986-01-01

    Graphex-CK 23 is a unique sodium fire extinction product. Minimum amounts of powder are required for very fast action. The sodium can be put to use again, when the fire has been extinguished. It can be applied in other industrial branches and with other metals, e.g. sodium/potassium circuits or lithium coolant in power plants. [de

  5. Noise from wind power plants

    Ljunggren, S.

    2001-12-01

    First, the generation of noise at wind power plants and the character of the sound is described. The propagation of the sound and its dependence on the structure of the ground and on wind and temperature is treated next. Models for calculation of the noise emission are reviewed and examples of applications are given. Different means for reducing the disturbances are described

  6. Underwater nuclear power plant structure

    Severs, S.; Toll, H.V.

    1982-01-01

    A structure for an underwater nuclear power generating plant comprising a triangular platform formed of tubular leg and truss members upon which are attached one or more large spherical pressure vessels and one or more small cylindrical auxiliary pressure vessels. (author)

  7. World nuclear power plant capacity

    1991-01-01

    This report provides the background information for statistics and analysis developed by NUKEM in its monthly Market Report on the Nuclear Fuel Cycle. The assessments in this Special Report are based on the continuous review of individual nuclear power plant projects. This Special Report begins with tables summarizing a variety of nuclear power generating capacity statistics for 1990. It continues with a brief review of the year's major events regarding each country's nuclear power program. The standard NUKEM Market Report tables on nuclear plant capacity are given on pages 24 and 25. Owing to space limitations, the first year shown is 1988. Please refer to previous Special Reports for data covering earlier years. Detailed tables for each country list all existing plants as well as those expected by NUKEM to be in commercial operation by the end of 2005. An Appendix containing a list of abbreviations can be found starting on page 56. Only nuclear power plants intended for civilian use are included in this Special Report. Reactor lifetimes are assumed to be 35 years for all light water reactors and 30 years for all other reactor types, unless other data or definite decommissioning dates have been published by the operators. (orig./UA) [de

  8. Nuclear power plant emergency preparedness

    2005-01-01

    The guide sets forth detailed requirements on how the licensee of a nuclear power plant shall plan, implement and maintain emergency response arrangements. The guide is also applied to nuclear material and nuclear waste transport in situations referred to in guide YVL 6.5. Requirements on physical protection are presented in a separate guide of Finnish Radiation and Nuclear Safety Authority (STUK)

  9. Safety issues and their ranking for 'small series' WWER-1000 nuclear power plants. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

    NONE

    2000-09-01

    This report presents the safety issues in 'small series' WWER-1000 nuclear power plants (NPPs). Safety issues are deviations from current recognized safety practices in design and operation judged to be safety significant by their impact on the plants' defence in depth. This report is intended to serve as reference for the development of plant specific safety improvement programmes and for the evaluation of measures proposed and/or implemented. The identification of safety issues is based on safety studies conducted by the operators of 'small series' WWER-1000 units and by organizations dealing with these reactors, on findings of IAEA safety missions to 'small series' WWER-1000 plants in South Ukraine, at Novovoronezh and Kalinin, and on information obtained from specialists from various countries during an IAEA consultants meeting, 8-12 September 1997 in Vienna, within the framework of the Extra budgetary Programme on the Safety of WWER and RBMK NPPs. Safety issues are first presented according to their impact on the main safety functions and are then described individually. The safety issues are characterized by issue title and specified by issue clarification. Safety issues connected with plant design are followed by the ranking of the issue and ranking justification. Altogether 85 safety issues have been identified, 12 of which are in Category III (defence in depth is insufficient, immediate corrective action is necessary), 38 in Category 11 (defence in depth is degraded, action is needed to resolve the issue) and 22 in Category I (departure from international practices, to be addressed as part of actions to resolve higher priority issues). In the case of operational safety issues (13 safety issues) no ranking is provided as the available material was considered insufficient. For each safety issue, comments and recommendations are made by the IAEA; the status of corresponding measures to improve safety implemented or planned at each site are presented in the

  10. Safety issues and their ranking for 'small series' WWER-1000 nuclear power plants. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

    2000-09-01

    This report presents the safety issues in 'small series' WWER-1000 nuclear power plants (NPPs). Safety issues are deviations from current recognized safety practices in design and operation judged to be safety significant by their impact on the plants' defence in depth. This report is intended to serve as reference for the development of plant specific safety improvement programmes and for the evaluation of measures proposed and/or implemented. The identification of safety issues is based on safety studies conducted by the operators of 'small series' WWER-1000 units and by organizations dealing with these reactors, on findings of IAEA safety missions to 'small series' WWER-1000 plants in South Ukraine, at Novovoronezh and Kalinin, and on information obtained from specialists from various countries during an IAEA consultants meeting, 8-12 September 1997 in Vienna, within the framework of the Extra budgetary Programme on the Safety of WWER and RBMK NPPs. Safety issues are first presented according to their impact on the main safety functions and are then described individually. The safety issues are characterized by issue title and specified by issue clarification. Safety issues connected with plant design are followed by the ranking of the issue and ranking justification. Altogether 85 safety issues have been identified, 12 of which are in Category III (defence in depth is insufficient, immediate corrective action is necessary), 38 in Category 11 (defence in depth is degraded, action is needed to resolve the issue) and 22 in Category I (departure from international practices, to be addressed as part of actions to resolve higher priority issues). In the case of operational safety issues (13 safety issues) no ranking is provided as the available material was considered insufficient. For each safety issue, comments and recommendations are made by the IAEA; the status of corresponding measures to improve safety implemented or planned at each site are presented in the

  11. Plant life management study of Japanese nuclear power plants

    Fukuda, Toshihiko

    1999-01-01

    Already more than twenty-five years have passed since the first commercial LWR plant went into operation in Japan. In this situation, MITI and 3 electric utilities (Tokyo Electric Power Company, Kansai Electric Power Co., Inc, Japan Atomic Power Company) have started a plant life management (PLM) study from 1994 to evaluate the long-term integrity of major systems, structures and components of aged LWR plants and ensure the safe, steady and highly reliable long-term operation. It consists of two phases: part 1 study and part 2 study. The part 1 study started in 1994 and focused on seven typical safety-related components. The part 1 study reports were made public in 1996. The part 2 study started in 1997. In this study we reviewed not only safety-related components but also plant reliability related components. The part 2 study reports were opened to the public in February 1999. This paper shows a summary of the part 2 study and our future PLM program. (author)

  12. Westinghouse ICF power plant study

    Sucov, E.W.

    1980-10-01

    In this study, two different electric power plants for the production of about 1000 MWe which were based on a CO 2 laser driver and on a heavy ion driver have been developed and analyzed. The purposes of this study were: (1) to examine in a self consistent way the technological and institutional problems that need to be confronted and solved in order to produce commercially competitive electricity in the 2020 time frame from an inertial fusion reactor, and (2) to compare, on a common basis, the consequences of using two different drivers to initiate the DT fuel pellet explosions. Analytic descriptions of size/performance/cost relationships for each of the subsystems comprising the power plant have been combined into an overall computer code which models the entire plant. This overall model has been used to conduct trade studies which examine the consequences of varying critical design values around the reference point

  13. Nuclear power plant safety in Brazil

    Lederman, L.

    1980-01-01

    The Code of Practice for the Safe Operation of Nuclear Power Plants states that: 'In discharging its responsibility for public health and safety, the government should ensure that the operational safety of a nuclear reactor is subject to surveillance by a regulatory body independent of the operating organization'. In Brazil this task is being carried out by the Comissao Nacional de Energia Nuclear in accordance with the best international practice. (orig./RW)

  14. Nuclear power plants: selected references

    Stewart, A.W.

    1982-01-01

    Books, articles, and US government documents cited in this bibliography cover the political, economic, environmental, scientific, and legal aspects of nuclear power. Because the question of safety has been such an important issue in the debate over nuclear power, safety aspects are treated in a substantial number of the publications cited. All material listed was published in the past 15 years, with the majority appearing since 1975

  15. Assessment of temporal trend of radiation dose to the public living in the large area contaminated with radioactive materials after a nuclear power plant accident

    Go, A Ra; Kim, Min Jun; Kim, Kwang Pyo [Dept. of Nuclear Engineering, Kyung Hee University, Seoul (Korea, Republic of); Cho, Nam Chan; Seol, Jeung Gun [Radiation Safety Team, Korea Electric Power Corporation Nuclear Fuel, Seoul (Korea, Republic of)

    2015-12-15

    It has been about 5 years since the Fukushima nuclear power plant accident, which contaminated large area with radioactive materials. It is necessary to assess radiation dose to establish evacuation areas and to set decontamination goal for the large contaminated area. In this study, we assessed temporal trend of radiation dose to the public living in the large area contaminated with radioactive materials after the Fukushima nuclear power plant accident. The dose assessment was performed based on Chernobyl model and RESRAD model for two evacuation lift areas, Kawauchi and Naraha. It was reported that deposition densities in the areas were 4.3-96 kBq m{sup -2} for {sup 134}Cs, 1.4-300 kBq m{sup -2} for {sup 137}Cs, respectively. Radiation dose to the residents depended on radioactive cesium concentrations in the soil, ranging 0.11-2.4 mSv y{sup -1} at Kawauchi area and 0.69-1.1 mSv y{sup -1} at Naraha area in July 2014. The difference was less than 5% in radiation doses estimated by two different models. Radiation dose decreased with calendar time and the decreasing slope varied depending on dose assessment models. Based on the Chernobyl dosimetry model, radiation doses decreased with calendar time to about 65% level of the radiation dose in 2014 after 1 year, 11% level after 10 years, and 5.6% level after 30 years. RESRAD dosimetry model more slowly decreased radiation dose with time to about 85% level after 1 year, 40% level after 10 years, and 15% level after 30 years. The decrease of radiation dose can be mainly attributed into radioactive decays and environmental transport of the radioactive cesium. Only environmental transports of radioactive cesium without consideration of radioactive decays decreased radiation dose additionally 43% after 1 year, 72% after 3 years, 80% after 10 years, and 83% after 30 years. Radiation doses estimated with cesium concentration in the soil based on Chernobyl dosimetry model were compared with directly measured radiation doses

  16. Power conditioning devices in nuclear power plants

    Shida, Toichi.

    1979-01-01

    Purpose: To automatically prevent the liquid level from lowering in a reactor even if a feedwater adjusting valve is locked in a bwr type nuclear power plant. Constitution: Where a feedwater adjusting valve should be locked, and if the mismatching degree between the main steam flow rate and the feedwater flow rate exceeds a predetermined value and the mismatched state continues for a certain period, the value set to a main control for setting the recycling flow rate is changed corresponding to the mismatching degree to compensate the same thereby preventing the liquid level from lowering in the reactor. (Ikeda, J.)

  17. Nuclear power plant outage optimisation strategy

    2002-10-01

    Competitive environment for electricity generation has significant implications for nuclear power plant operations, including among others the need of efficient use of resources, effective management of plant activities such as on-line maintenance and outages. Nuclear power plant outage management is a key factor for good, safe and economic nuclear power plant performance which involves many aspects: plant policy, co-ordination of available resources, nuclear safety, regulatory and technical requirements and, all activities and work hazards, before and during the outage. This technical publication aims to communicate these practices in a way they can be used by operators and utilities in the Member States of the IAEA. It intends to give guidance to outage managers, operating staff and to the local industry on planning aspects, as well as examples and strategies experienced from current plants in operation on the optimization of outage period. This report discusses the plant outage strategy and how this strategy is actually implemented. The main areas identified as most important for outage optimization by the utilities and government organizations participating in this report are: organization and management; outage planning and preparation, outage execution, safety outage review, and counter measures to avoid extension of outages and to easier the work in forced outages. This report was based on discussions and findings by the authors of the annexes and the participants of an Advisory Group Meeting on Determinant Causes for Reducing Outage Duration held in June 1999 in Vienna. The report presents the consensus of these experts regarding best common or individual good practices that can be used at nuclear power plants with the aim to optimize

  18. WWER-440/230 reactor pressure vessel integrity. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

    1996-08-01

    This report was prepared with the objective of integrating all aspects involved and to provide plant specific information on the issue of reactor pressure vessel integrity including pressurized thermal shock assessment. Areas of the thermal hydraulic analysis including selection of transients, of the structural analysis including fracture mechanics assessment and of the material properties including embrittlement, annealing and re-embrittlement behaviour are addressed. The report also provides related recommendations and conclusions as well as detailed information on the plant specific status for operating WWER-440/230 nuclear power plants. 10 refs, 9 figs, 9 tabs

  19. Wall thinning of piping in power plants

    Ohta, Joji; Inada, Fumio; Morita, Ryo; Kawai, Noboru; Yoneda, Kimitoshi

    2005-01-01

    Major mechanisms causing wall thinning of piping in power plants are flow accelerated corrosion (FAC), cavitation erosion and droplet erosion. Their fundamental aspects are reviewed on the basis of literature data. FAC is chemical process and it is affected by hydrodynamic factors, temperature, pH, dissolved oxygen concentration and chemical composition of materials. On the other hand, cavitation erosion and droplet erosion are mechanical process and they are mainly affected by hydrodynamic factors and mechanical properties of materials. Evaluation codes for FAC and mitigation methods of FAC and the erosion are also described. Wall thinning of piping is one of public concerns after an accident of a pipe failure at Mihama Nuclear Power Plant Unit 3, Kansai Electric Power Co., Inc., in August 2004. This paper gives comprehensive understanding of the wall thinning mechanism. (author)

  20. Nuclear Power Plant Concrete Structures

    Basu, Prabir [International Atomic Energy Agency (IAEA); Labbe, Pierre [Electricity of France (EDF); Naus, Dan [Oak Ridge National Laboratory (ORNL)

    2013-01-01

    A nuclear power plant (NPP) involves complex engineering structures that are significant items of the structures, systems and components (SSC) important to the safe and reliable operation of the NPP. Concrete is the commonly used civil engineering construction material in the nuclear industry because of a number of advantageous properties. The NPP concrete structures underwent a great degree of evolution, since the commissioning of first NPP in early 1960. The increasing concern with time related to safety of the public and environment, and degradation of concrete structures due to ageing related phenomena are the driving forces for such evolution. The concrete technology underwent rapid development with the advent of chemical admixtures of plasticizer/super plasticizer category as well as viscosity modifiers and mineral admixtures like fly ash and silica fume. Application of high performance concrete (HPC) developed with chemical and mineral admixtures has been witnessed in the construction of NPP structures. Along with the beneficial effect, the use of admixtures in concrete has posed a number of challenges as well in design and construction. This along with the prospect of continuing operation beyond design life, especially after 60 years, the impact of extreme natural events ( as in the case of Fukushima NPP accident) and human induced events (e.g. commercial aircraft crash like the event of September 11th 2001) has led to further development in the area of NPP concrete structures. The present paper aims at providing an account of evolution of NPP concrete structures in last two decades by summarizing the development in the areas of concrete technology, design methodology and construction techniques, maintenance and ageing management of concrete structures.

  1. Management of delayed nuclear power plant projects

    NONE

    1999-09-01

    According to the available information at the IAEA PRIS (Power Reactor Information System) at the end of 1998 there were more than 40 nuclear power plant projects with delays of five or more years with respect to the originally scheduled commercial operation. The degree of conformance with original construction schedules showed large variations due to several issues, including financial, economic and public opinion factors. Taking into account the number of projects with several years delay in their original schedules, it was considered useful to identify the subject areas where exchange of experience among Member States would be mutually beneficial in identification of problems and development of guidance for successful management of the completion of these delayed projects. A joint programme of the IAEA Departments of Nuclear Energy (Nuclear Power Engineering Section) and Technical Co-operation (Europe Section, with additional support from the Latin America and West Asia Sections) was set up during the period 1997-1998. The specific aim of the programme was to provide assistance in the management of delayed nuclear power plants regarding measures to maintain readiness for resuming the project implementation schedule when the conditions permit. The integration of IAEA interdepartmental resources enabled the participation of 53 experts from 14 Member States resulting in a wider exchange of experience and dissemination of guidance. Under the framework of the joint programme, senior managers directly responsible for delayed nuclear power plant projects identified several issues or problem areas that needed to be addressed and guidance on management be provided. A work plan for the development of several working documents, addressing the different issues, was established. Subsequently these documents were merged into a single one to produce the present publication. This publication provides information and practical examples on necessary management actions to preserve

  2. Management of delayed nuclear power plant projects

    1999-09-01

    According to the available information at the IAEA PRIS (Power Reactor Information System) at the end of 1998 there were more than 40 nuclear power plant projects with delays of five or more years with respect to the originally scheduled commercial operation. The degree of conformance with original construction schedules showed large variations due to several issues, including financial, economic and public opinion factors. Taking into account the number of projects with several years delay in their original schedules, it was considered useful to identify the subject areas where exchange of experience among Member States would be mutually beneficial in identification of problems and development of guidance for successful management of the completion of these delayed projects. A joint programme of the IAEA Departments of Nuclear Energy (Nuclear Power Engineering Section) and Technical Co-operation (Europe Section, with additional support from the Latin America and West Asia Sections) was set up during the period 1997-1998. The specific aim of the programme was to provide assistance in the management of delayed nuclear power plants regarding measures to maintain readiness for resuming the project implementation schedule when the conditions permit. The integration of IAEA interdepartmental resources enabled the participation of 53 experts from 14 Member States resulting in a wider exchange of experience and dissemination of guidance. Under the framework of the joint programme, senior managers directly responsible for delayed nuclear power plant projects identified several issues or problem areas that needed to be addressed and guidance on management be provided. A work plan for the development of several working documents, addressing the different issues, was established. Subsequently these documents were merged into a single one to produce the present publication. This publication provides information and practical examples on necessary management actions to preserve

  3. Nuclear power in the public eye

    Hill, J.

    1978-01-01

    This lecture by the Chairmam of the United Kingdom Atomic Energy Authority attempts to appraise the changes in public attitudes to nuclear power that have occurred in recent years, starting from the atomic bombs dropped on Japan in 1945, through the detonation of the first UK nuclear test weapon at Montebello in 1952, and the triumph of Calder Hall, the first UK nuclear power station, in 1956. The question is discussed as to why in the early days scientists and technologists could apparently do no wrong, but now-a-days they are subject to much criticism and apparently can do little right. Public pressures have done much to bring difficulties to the attention of politicians and authorities. Amongst matter discussed are the relative safety of nuclear power, the design standards of nuclear power stations, and radioactive waste and reprocessing plants. The author asks that decisions on nuclear power be taken on the basis of fact and not oratory, and on reason and not emotion. (U.K.)

  4. Safety goals for nuclear power plants: a discussion paper

    1982-02-01

    This report includes a proposed policy statement on safety goals for nuclear power plants published by the Commission for public comment and a supporting discussion paper. Proposed qualitative goals and associated numerical guidelines for nuclear power-plant accident risks are presented. The significance of the goals and guidelines, their bases and rationale, and their proposed mode of implementation are discussed

  5. Public acceptance of nuclear power in Japan

    Iguchi, T.

    1995-01-01

    Japan has a fragile energy supply structure, with 84% of its energy depending on import; for example, 99.6% of the oil comes from overseas, which makes Japan's economic base rather vulnerable. In order to ensure constant energy supply, it is indispensable to diversify the energy sources and to create indigenous energy. In view of this, nuclear energy is considered to be the main alternative to crude oil because it has several advantages over other energy sources, such as stable supply of uranium and the fact that it is compatible with efforts to find solutions to global environmental problems. However, since the general public is not familiar with nuclear technology, it is difficult to get the understanding and co-operation of people. In view of this, public relations activities providing information on the need and safety of nuclear power generation have been performed. As a result, in recent years, about 70% of the people came to recognize the need for nuclear power generation. Although people's recognition of this need has increased substantially, it is still difficult for them to accept the construction of nuclear facilities, because of their anxiety regarding the safety of such plants and the lack of information by the government and electric utilities. This makes the acquisition of new sites for nuclear power plants difficult, so that the time required for developing such plants becomes longer. In order to eliminate people's anxieties, both the government and electric utilities should provide accurate information, at the proper time and using a method that makes it easy for the people to understand the problems involved. It is also important for the government and the electric utilities to listen carefully to the opinions and questions of people and to increase friendly communications with them. The government, electric utilities and constructors of nuclear facilities have to co-operate in order to improve the measures taken to gain public acceptance of

  6. Nuclear power plant life management

    Rorive, P.; Berthe, J.; Lafaille, J.P.; Eussen, G.

    1998-01-01

    Several definitions can be given to the design life of a nuclear power plant just as they can be attributed to the design life of an industrial installation: the book-keeping life which is the duration of the provision for depreciation of the plant, the licensed life which corresponds to the duration for which the plant license has been granted and beyond which a new license should be granted by the safety authorities, the design life which corresponds to the duration specified for ageing and fatigue calculations in the design of some selected components during the plant design phase, the technical life which is the duration of effective technical operation and finally the economic life corresponding to the duration of profitable operation of the plant compared with other means of electricity production. Plant life management refers to the measures taken to cope with the combination of licensed, design, technical and economical life. They can include repairs and replacements of components which have arrived to the end of their life due to known degradation processes such as fatigue, embrittlement, corrosion, wear, erosion, thermal ageing. In all cases however, it is of great importance to plan the intervention so as to minimise the economic impact. Predictive maintenance is used together with in-service inspection programs to fulfil this goal. The paper will go over the methodologies adopted in Belgium in all aspects of electrical, mechanical and civil equipment for managing plant life. (author)

  7. Power station design and public relations - association with the citizen

    Eiteneyer, H.

    1977-01-01

    The series of questions concerning public relations, connected with the realization of power plant construction projects will be discussed before the background of the public requirement of electricity supply corporations. It will be explained that public relation cannot be seen as an instrument, having the purpose to inform about 'good or bad' of power plant designs and construction intentions. PR is more a constitutive element of economy policy. Transparent, clear information of the citizen about power plant projects, and power plant related procedures should be their targets. This signifies a distance from just technical presentation. PR must develop in the direction to active corporational strategy, taking psychological- and social psychological influences into consideration. Statements will be made in regard to the dialogue between power plant advocates and power plant opponents. The special responsibility of the public electricity supply corporations for an always sufficient, safe and economical supply to the consumer, will be pointed out. Better information of the public in this regard is a necessary requirement. (orig.) [de

  8. Operation and maintenance of nuclear power plants

    Ackermann, G.

    1987-01-01

    This textbook gives a systematic introduction into the operational and maintenance activities in nuclear power plants with pressurized water reactors. Subjects: (1) Setup and operational behaviour of power reactors, (2) setup of nuclear power plants, (3) radiation protection and nuclear safety, (4) nuclear fuel, (5) constructional layout of nuclear power plants, (6) management, and (7) maintenance. 158 figs., 56 tabs

  9. Plant diagnostics in power stations

    Sturm, A.; Doering, D.

    1985-01-01

    The method of noise diagnostics is dealt with as a part of plant diagnostics in nuclear power stations. The following special applications are presented: (1) The modular noise diagnostics system is used for monitoring primary coolant circuits and detecting abnormal processes due to mechanical vibrations, loose parts or leaks. (2) The diagnostics of machines and plants with antifriction bearings is based on bearing vibration measurements. (3) The measurement of the friction moment by means of acoustic emission analysis is used for evaluating the operational state of slide bearings

  10. Maintenance of Nuclear Power Plants

    Quintana, J. M.; Sanchez, J. T.

    2002-01-01

    With this article about the Maintenance in nuclear power plants we will try to give to see the importance of this kind of installations but the problems found by the clients and contractors to face it, and some possible solutions to improve it. It is necessary to understand this problem like something inner to the installation and must be considerate like a benefit for the same. Of course, there must be adequate Sevices Companies in direct relation with the installation that take the responsibility of assuming and understanding the correct fulfillment of the fixed milestones to get the optimal working of the whole plant systems. (Author)

  11. Safety goals for commercial nuclear power plants

    Roe, J.W.

    1988-01-01

    In its official policy statement on safety goals for the operation of nuclear power plants, the Nuclear Regulatory Commission (NRC) set two qualitative goals, supported by two quantitative objectives. These goals are that (1) individual members of the public should be provided a level of protection from the consequences of nuclear power plant operation such that individuals bear no significant additional risk to life and health; and (2) societal risks to life and health from nuclear power plant operation should be comparable to or less than the risks of generating electricity by viable competing technologies and should not be a significant addition to other societal risks. As an alternative, this study proposes four quantitative safety goals for nuclear power plants. It begins with an analysis of the NRC's safety-goal development process, a key portion of which was devoted to delineating criteria for evaluating goal-development methods. Based on this analysis, recommendations for revision of the NRC's basic benchmarks for goal development are proposed. Using the revised criteria, NRC safety goals are evaluated, and the alternative safety goals are proposed. To further support these recommendations, both the NRC's goals and the proposed goals are compared with the results of three major probabilistic risk assessment studies. Finally, the potential impact of these recommendations on nuclear safety is described

  12. Safety of Nuclear Power Plants: Design. Specific Safety Requirements

    2012-01-01

    On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

  13. East European nuclear power plant review

    Thomas, Steve

    1993-01-01

    Western public opinion regards East European nuclear power plants as inefficient and dangerous. However the plants achieve consistently good operating performances. The load factors achieved by each type of plant by country in 1991 are tabulated. These are shown to be good, especially the Hungarian plant. Load factors seem to be dependent on the type of plant rather than where they were installed. WWER 213s worked better than the WWER 320s. This was because of long shutdowns to try and bring the safety standards up to acceptable levels. RBMK performances were depressed because of a 30% derating by safety authorities on 8 out of the 15 units operating. Overall the picture in Eastern Europe is encouraging with improvements in safety related indicators such as break-down frequency whilst the plants still achieve respectable load factors. The performance of the WWER 320s is particularly encouraging. Good load factors from this type of plant in Russia, the Ukraine and Bulgaria may allow older unsafe plant to be phased out. (UK)

  14. Managing Siting Activities for Nuclear Power Plants

    NONE

    2012-06-15

    One of the IAEA's statutory objectives is to ''seek to accelerate and enlarge the contribution of atomic energy to peace, health and prosperity throughout the world''. One way this objective is achieved is through the publication of a range of technical series. Two of these are the IAEA Nuclear Energy Series and the IAEA Safety Standards Series. According to Article III.A.6 of the IAEA Statute, the safety standards establish 'standards of safety for protection of health and minimization of danger to life and property.' The safety standards include the Safety Fundamentals, Safety Requirements and Safety Guides. These standards are written primarily in a regulatory style, and are binding on the IAEA for its own programmes. The principal users are the regulatory bodies in Member States and other national authorities. The IAEA Nuclear Energy Series comprises reports designed to encourage and assist R and D on, and application of, nuclear energy for peaceful uses. This includes practical examples to be used by owners and operators of utilities in Member States, implementing organizations, academia, and government officials, among others. This information is presented in guides, reports on technology status and advances, and best practices for peaceful uses of nuclear energy based on inputs from international experts. The IAEA Nuclear Energy Series complements the IAEA Safety Standards Series. The introduction of nuclear power brings new challenges to States - one of them being the selection of appropriates sites. It is a project that needs to begin early, be well managed, and deploy good communications with all stakeholders; including regulators. This is important, not just for those States introducing nuclear power for the first time, but for any State looking to build a new nuclear power plant. The purpose of the siting activities goes beyond choosing a suitable site and acquiring a licence. A large part of the project is about producing and maintaining a validated

  15. Managing Siting Activities for Nuclear Power Plants

    2012-01-01

    One of the IAEA's statutory objectives is to ''seek to accelerate and enlarge the contribution of atomic energy to peace, health and prosperity throughout the world''. One way this objective is achieved is through the publication of a range of technical series. Two of these are the IAEA Nuclear Energy Series and the IAEA Safety Standards Series. According to Article III.A.6 of the IAEA Statute, the safety standards establish 'standards of safety for protection of health and minimization of danger to life and property.' The safety standards include the Safety Fundamentals, Safety Requirements and Safety Guides. These standards are written primarily in a regulatory style, and are binding on the IAEA for its own programmes. The principal users are the regulatory bodies in Member States and other national authorities. The IAEA Nuclear Energy Series comprises reports designed to encourage and assist R and D on, and application of, nuclear energy for peaceful uses. This includes practical examples to be used by owners and operators of utilities in Member States, implementing organizations, academia, and government officials, among others. This information is presented in guides, reports on technology status and advances, and best practices for peaceful uses of nuclear energy based on inputs from international experts. The IAEA Nuclear Energy Series complements the IAEA Safety Standards Series. The introduction of nuclear power brings new challenges to States - one of them being the selection of appropriates sites. It is a project that needs to begin early, be well managed, and deploy good communications with all stakeholders; including regulators. This is important, not just for those States introducing nuclear power for the first time, but for any State looking to build a new nuclear power plant. The purpose of the siting activities goes beyond choosing a suitable site and acquiring a licence. A large part of the project is about producing and maintaining a validated

  16. Decommissioning of nuclear power plants

    Friske, A.; Thiele, D.

    1988-01-01

    The IAEA classification of decommissioning stages is outlined. The international development hitherto observed in decommissioning of nuclear reactors and nuclear power stations is presented. The dismantling, cutting and decontamination methods used in the decommissioning process are mentioned. The radioactive wastes from decommissioning are characterized, the state of the art of their treatment and disposal is given. The radiation burdens and the decommissioning cost in a decommissioning process are estimated. Finally, some evaluation of the trends in the decommissioning process of nuclear power plants is given. 54 refs. (author)

  17. Management strategies for nuclear power plant outages

    2006-01-01

    More competitive energy markets have significant implications for nuclear power plant operations, including, among others, the need for more efficient use of resources and effective management of plant activities such as on-line maintenance and outages. Outage management is a key factor for safe, reliable and economic plant performance and involves many aspects: plant policy, coordination of available resources, nuclear safety, regulatory and technical requirements, and all activities and work hazards, before and during the outage. The IAEA has produced this report on nuclear power plant outage management strategies to provide both a summary and an update of a follow-up to a series of technical documents related to practices regarding outage management and cost effective maintenance. The aim of this publication is to identify good practices in outage management: outage planning and preparation, outage execution and post-outage review. As in in the related technical documents, this report aims to communicate these practices in such a way that they can be used by operating organizations and regulatory bodies in Member States. The report was prepared as part of an IAEA project on continuous process improvement. The objective of this project is to increase Member State capabilities in improving plant performance and competitiveness through the utilization of proven engineering and management practices developed and transferred by the IAEA

  18. Power Electronics and Electric Machines Publications | Transportation

    Research | NREL and Electric Machines Publications Power Electronics and Electric Machines Publications NREL and its partners have produced many papers and presentations related to power electronics and from power electronics and electric machines research are available to the public. Photo by Pat Corkery

  19. Safety in nuclear power plants

    Koeberlein, K.

    1987-01-01

    In nuclear power plants large amounts of radioactive fission products ensue from the fission of uranium. In order to protect the environment, the radioactive material is confined in multiple 'activity barriers' (crystal matrix of the fuel, fuel cladding, coolant boundary, safety containment, reactor building). These barriers are protected by applying a defense-in-depth concept (high quality requirements, protection systems which recognize and terminate operational incidents, safety systems to cope with accidents). In spite of a favorable safety record of German nuclear power plants it is obvious - and became most evident by the Chernobyl accident - that absolute safety is not achievable. At Chernobyl, however, design disadvantages of that reactor type (like positive reactivity feedback of coolant voiding, missing safety containment) played an important role in accident initiation and progression. Such features of the Russian 'graphite-moderated pressure tube boiling water reactor' are different from those of light water reactors operating in western countries. The essential steps of the waste management of the nuclear fuel cycle ('Entsorgung') are the interim storage, the shipment, and the reprocessing of the spent fuel and the final repository of radioactive waste. Reprocessing means the separation of fossil material (uranium, plutonium) from radioactive waste. Legal requirements for radiological protection of the environment, which are identical for nuclear power plants and reprocessing plant, are complied with by means of comprehensive filter systems. Safety problems of a reprocessing plant are eased considerably by the fact that system pressures, process temperatures and energy densities are low. In order to confine the radioactive waste from the biosphere for a very long period of time, it is to be discarded after appropriate treatment into the deep geological underground of salt domes. (orig./HP) [de

  20. Nuclear power plants and environment

    Agudo, E.G.; Penteado Filho, A.C.

    1980-01-01

    The question of nuclear power plants is analysed in details. The fundamental principles of reactors are described as well as the problems of safety involved with the reactor operation and the quantity and type of radioactive released to the environment. It shows that the amount of radioactive is very long. The reactor accidents has occurred, as three mile island, are also analysed. (M.I.A.)

  1. Availability of thermal power plants

    Nitsch, D.; Schmitz, H.

    1981-01-01

    Availability data based on unique uniform, and clearly defined concepts and methods of acquisition have been compiled by the VGB since 1970. The data are published in anual reports. These reports contain availability data of fossil-fuelled units, combined gas/steam units, nuclear power plants, and gas turbine plants in Germany and abroad, listed by unit size fuel type, time of operation, and application. For the purpose of comparison, the data for the years since 1970 are presented as well as data averaged for the whole period under report. The main results for the year 1980 are presented now that the greater part of the plants has been evaluated. The complete evaluation will be published towards the end of 1981. (orig.) [de

  2. Nuclear power: Public opinion in social crisis

    Gagarinski, A.

    1995-01-01

    Nuclear power in Russia found itself in new conditions, if compared with first five years after Chernobyl. It is coming out of the technology crisis from 1986 and the political crisis of 1991, going deeper and deeper in the hard economic crisis, when the nuclear power plants receive about 10 percent of payments for electricity, produced and supplied to the customers. Economic crisis forms the public attitude about nuclear power under conditions, different from opinion formed during the previous decades, when energy supply was considered practically free of charge. These realities have moved ecological problems to the periphery of public conscience. This was, in particular, shown with all evidence during the parliamentary elections in Russia in 1993, when the Russian 'Green Party' had not achieved any seats in the State Duma. This is also confirmed by sociological polls of Russians done in the last two years. It seems, however, that change of priorities in public opinion had increased attention to the problems of environment in the nearest future are as inevitable, as the forthcoming Russia's and Its nearest neighbours getting out of the state of economic fail down. In these conditions the possibility of nuclear power development will be determined not only by economic factors, but also by the factor of public confidence. The progress in the development of public information programme in the field of nuclear power, if compared with the first years after Chernobyl, is evident. Several governing and coordinating structures exist and work in Russia (Department of Minatom, Inter-departmental Council for information and public relations, similar Department in Rosenergoatom Concern), regional public information centres, special services at many nuclear science and industry enterprises. Similar system works in Ukraine and is being established in Kazakhstan. In antinuclear Belarus, where, nevertheless, the objective need of nuclear power is already reflected in the national

  3. Elecnuc. Nuclear power plants in the world

    2003-01-01

    This 2003 version of Elecnuc contents information, data and charts on the nuclear power plants in the world and general information on the national perspectives concerning the electric power industry. The following topics are presented: 2002 highlights; characteristics of main reactor types and on order; map of the French nuclear power plants; the worldwide status of nuclear power plants on 2002/12/3; units distributed by countries; nuclear power plants connected to the Grid by reactor type groups; nuclear power plants under construction; capacity of the nuclear power plants on the grid; first electric generations supplied by a nuclear unit; electrical generation from nuclear plants by country at the end 2002; performance indicator of french PWR units; trends of the generation indicator worldwide from 1960 to 2002; 2002 cumulative Load Factor by owners; nuclear power plants connected to the grid by countries; status of license renewal applications in Usa; nuclear power plants under construction; Shutdown nuclear power plants; exported nuclear power plants by type; exported nuclear power plants by countries; nuclear power plants under construction or order; steam generator replacements; recycling of Plutonium in LWR; projects of MOX fuel use in reactors; electricity needs of Germany, Belgium, Spain, Finland, United Kingdom; electricity indicators of the five countries. (A.L.B.)

  4. Safety goals for nuclear power plant operation

    1983-05-01

    This report presents and discusses the Nuclear Regulatory Commission's, Policy Statement on Safety Goals for the Operation of Nuclear Power Plants. The safety goals have been formulated in terms of qualitative goals and quantitative design objectives. The qualitative goals state that the risk to any individual member of the public from nuclear power plant operation should not be a significant contributor to that individual's risk of accidental death or injury and that the societal risks should be comparable to or less than those of viable competing technologies. The quantitative design objectives state that the average risks to individual and the societal risks of nuclear power plant operation should not exceed 0.1% of certain other risks to which members of the US population are exposed. A subsidiary quantitative design objective is established for the frequency of large-scale core melt. The significance of the goals and objectives, their bases and rationale, and the plan to evaluate the goals are provided. In addition, public comments on the 1982 proposed policy statement and responses to a series of questions that accompanied the 1982 statement are summarized

  5. Southpoint power plant final environmental impact statement

    1999-01-01

    This document is the Final Environmental Impact Statement (FEIS) for a proposed lease of acreage on the Fort Mojave Indian Reservation in Mohave County, Arizona for development of a natural gas fired 500 megawatt combined cycle power plant. The Bureau of Indian Affairs (BIA) serves as the federal lead agency and the Fort Mojave Indian Tribe (FMIT) and the Western Area Power Administration (WAPA) are cooperating agencies for the EIS process. The purpose of this document is to provide information to the public and to interested public agencies regarding the environmental consequences of the approval of a long-term lease for the construction and operation of the proposed Southpoint power plant. The FEIS, prepared by Hallock/Gross, Inc. under the direction of the BIA and in cooperation with the FMIT and WAPA, addresses the comparative analysis of alternatives and evaluates the environmental consequences of such alternatives on various resources and addresses public comments. A number of technical reports were used in the preparation of the Draft EIS and FEIS and are available for review as Appendices to this document under separate cover that can be reviewed at the BIA offices which are listed

  6. Nuclear power plants - Quality assurance

    1980-01-01

    This International Standard defines principles for the establishment and implementation of quality assurance programmes during all phases of design, procurement, fabrication, construction, commissioning, operation, maintenance and decommissioning of structures, systems and components of nuclear power plants. These principles apply to activities affecting the quality of items, such as designing, purchasing, fabricating, handling, shipping, storing, cleaning, erecting, installing, testing, commissioning, operating, inspecting, maintaining, repairing, refuelling and modifying and eventually decommissioning. The manner in which the principles described in this document will be implemented in different organizations involved in a specific nuclear power project will depend on regulatory and contractual requirements, the form of management applied to a nuclear power project, and the nature and scope of the work to be performed by different organizations

  7. Nuclear power and public policy

    Shrader-Frechette, K.S.

    1980-01-01

    The authors' purpose is to raise some of the social, political, and ethical issues which for so long have been ignored in making government assessments of nuclear power. In particular she asks whether current policy (governing admissible releases of radioactivity during electricity generation) is based on sound ethical premises. She argues that it is ethically reprehensible to generate long-lived nuclear wastes without knowing whether they can be safety stored. An ethical and methodological assessment of public policy is presented based on the presupposition that a core melt accident is improbable. It is then argued that the alleged cost-effectiveness of fission generated electricity is based on economical methodology which is both illogical and unethical. Finally, an outline of the sorts of policy-making procedures which ought to be followed in dealing with nuclear technology is given. (Auth.)

  8. Fusion power plant simulations: a progress report

    Cook, J.M.; Pattern, J.S.; Amend, W.E.

    1976-01-01

    The objective of the fusion systems analysis at ANL is to develop simulations to compare alternative conceptual designs of magnetically confined fusion power plants. The power plant computer simulation progress is described. Some system studies are also discussed

  9. Cooling towers for thermal power plants

    Chaboseau, J.

    1987-01-01

    After a brief recall on cooling towers testing and construction, this paper presents four examples of very large French nuclear power plant cooling towers, and one of an Australian thermal power plant [fr

  10. Cooling water recipients for nuclear power plants

    Dahl, F.-E.; Saetre, H.J.

    1971-10-01

    The hydrographical and hydrological conditions at 17 prospective nuclear power plant sites in the Oslofjord district are evaluated with respect to their suitability as recipients for thermal discharges from nuclear power plants. No comparative evaluations are made. (JIW)

  11. Nuclear Power Plant (NPP) safety in Brazil

    Lederman, L.

    1980-01-01

    The multidisciplinary aspects of the activities involved in the nuclear power plant (NPP) licensing, are presented. The activities of CNEN's technical staff in the licensing of Angra-1 and Angra-2 power plants are shown. (E.G.) [pt

  12. Abnormality diagnostic technology for nuclear power plants

    Ishikawa, Satoshi

    1986-01-01

    In nuclear power plants, it is feared that the failure of the installations containing radioactive substances may inflict serious damage on public and workers. Therefore in nuclear power plants, the ensuring of safety is planned by supposing hypothetical accidents which are not likely to occur from engineering viewpoint, and multiple protection measures are taken in the plant constitution. In addition to the safety measures from such hardware aspect, recently in order to prevent the occurrence of accidents by using various safety-confirming means, and to detect early when any accident occurred, the development and putting in practical use of many monitoring equipments have been promoted. In such background, the development of nuclear power generation supporting system was carried out for five years since fiscal year 1980, subsidized by the Ministry of International Trade and Industry, and in this report, the technology of equipment abnormality diagnosis developed as a part of that project and the diagnostic techniques for actual plants are described. The technology of diagnosing nuclear reactor abnormality includes the diagnosis of loose metal pieces and the abnormal vibration of in-core structures. The detection and diagnosis of valve leak and the diagnosis of the deterioration of detectors are also explained. (Kako, I.)

  13. Elecnuc. Nuclear power plants in the world

    1998-01-01

    This small booklet summarizes in tables all the numerical data relative to the nuclear power plants worldwide. These data come from the French CEA/DSE/SEE Elecnuc database. The following aspects are reviewed: 1997 highlights; main characteristics of the reactor types in operation, under construction or on order; map of the French nuclear power plants; worldwide status of nuclear power plants at the end of 1997; nuclear power plants in operation, under construction and on order; capacity of nuclear power plants in operation; net and gross capacity of nuclear power plants on the grid and in commercial operation; forecasts; first power generation of nuclear origin per country, achieved or expected; performance indicator of PWR units in France; worldwide trend of the power generation indicator; nuclear power plants in operation, under construction, on order, planned, cancelled, shutdown, and exported; planning of steam generators replacement; MOX fuel program for plutonium recycling. (J.S.)

  14. G. Nuclear power plant siting

    1976-01-01

    The selection of a site for a nuclear power site is a complex process involving considerations of public health and safety, engineering design, economics, and environmental impact. Although policies adopted in various countries differ in some details, a common philosophy usually underlies the criteria employed. The author discusses the basic requirements, as they relate to New Zealand, under the headings: engineering and economics; health and safety; environmental factors

  15. Nuclear power plants; security strategy

    Sidorenko, V.A.

    1989-01-01

    Safety standards and approaches to NPPs safety resulting from multilayer experience are presented. It is stressed that sufficiency and efficiency of reactor safety measures should be payed constant attention. Real evolution of accidents reqires unlimited development of new safety means. It is evident that in nuclear power there should exist high s afety culture . NPPs safety should be guaranteed by joint measures of both specialists ans public

  16. Gundremmingen (KRB) nuclear power plant

    1974-03-01

    Plant reliability and availability during 1973 was very good despite an unscheduled shutdown in October. A temporal availability of 79.42% and an operating availability of 79.07% yielded a usable current production of 1 634 000 000 000 kWh. In May, during the five-week inspection and refueling period, several machines and items of equipment were overhauled in addition to the major generator strip-down, and checks were also carried out on the safety and protection systems throughout the plant. Particular attention was paid to the fire-protection system so that, for example, a fire-protection valve was installed in the turbine oil circuit. The heating system was made independent of oil supplies and considerable economies were achieved by converting it from oil-firing to secondary steam operation. During October copper deposits from a feedwater pre-heater were discovered in the reactor core. The plant had to be shut down for five weeks in order to clean the reactor out with various items of cleaning equipment. After the plant had been started up again, it proved necessary to take the pre-heater releasing copper out of service. This was possible without any noteworthy loss of power. For further operation, it will be necessary to fit the pre-heater with high-grade steel tubes. Throughout the remainder of the year, the power plant operated under full load without any particular malfunction occurring. At the beginning of the year increasing amount of activity in the reactor water pointed to fuel element damage. It was possible to operate the plant at a constant, low level of water activity during the second half of the year after refuelling and the removal of the faulty elements. Faultless plant operation can likewise be expected for 1974. Owing to the officially required pressure test on the reactor pressure vessel, the inspection time will probably extend over six weeks. It is expected that plant availability during 1974 will exceed the 1973 figure

  17. Nuclear power plants in populated areas

    Wachsmann, F.

    1973-01-01

    The article first deals with the permanently increasing demand for electical power. Considering the ever growing energy demand which can no longer be covered by conventional power plants, it has become necessary to set up nuclear power plants of larger range. The author presents in a survey the basic function of nuclear power plants as well as the resulting risks and safety measures. The author concludes that according to present knowledge there is no more need to erect nuclear power plants outside densely populated urban areas but there is now the possibility of erecting nuclear power plants in densely populated areas. (orig./LH) [de

  18. Atucha I nuclear power plant transients analysis

    Castano, J.; Schivo, M.

    1987-01-01

    A program for the transients simulation thermohydraulic calculation without loss of coolant (KWU-ENACE development) to evaluate Atucha I nuclear power plant behaviour is used. The program includes systems simulation and nuclear power plants control bonds with real parameters. The calculation results show a good agreement with the output 'protocol' of various transients of the nuclear power plant, keeping the error, in general, lesser than ± 10% from the variation of the nuclear power plant's state variables. (Author)

  19. Obligatory provisions for nuclear power plants

    Cloosters, W.

    2008-01-01

    To cover the expenses associated with decommissioning and disposal of their nuclear power plants, German nuclear power plant operators set aside a total of more than EUR 30 billion and entered the respective provisions into their balance sheets. One point of eminent importance in this regard is the question whether these provisions are adequate in amount and permitted under accounting and tax laws. The other point to be considered is whether the funds will be available reliably if and when needed. Against the backdrop of these issues, the practice and importance of making these provisions are described. This is followed by an outline of the basic accounting and taxation aspects. It is seen that obligations under public law can be the basis of financial provisions only if there is a obligation sufficiently concrete in terms of time and object. The following examination of applicable obligations under the Atomic Energy Act incumbent upon nuclear power plant operators with regard to decommissioning and disposal results in the finding that such obligations are only partly regulated in the Atomic Energy Act, and that specifications in terms of time and purpose are insufficient. If the national practice of making financial provisions is to be put on a reliable basis, it is recommended to express the law on decommissioning and its mode of financing in more concrete terms in the Atomic Energy Act. In addition to unequivocal decommissioning and disposal obligations, the Atomic Energy Act should also incorporate regulations about financial provisions for decomissioning which are in need of more precise language. The present practice of making provisions is characterized by the risk that the funds necessary for planned decommissioning and disposal may not be available when needed. It is against this background that possible solutions reducing that risk are discussed. A recommendation is expressed to establish a public fund for decommissioning and disposal to which the

  20. Intelligent power plant simulator for educational purposes

    Seifi, A.; Seifi, H.; Ansari, M. R.; Parsa Moghaddam, M.

    2001-01-01

    An Intelligent Tutoring System can be effectively employed for a power plant simulator so that the need for instructor in minimized. In this paper using the above concept as well as object oriented programming and SIMULINK Toolbox of MATLAB, an intelligent tutoring power plant simulator is proposed. Its successful application on a typical 11 MW power plant is demonstrated

  1. Reliability analysis techniques in power plant design

    Chang, N.E.

    1981-01-01

    An overview of reliability analysis techniques is presented as applied to power plant design. The key terms, power plant performance, reliability, availability and maintainability are defined. Reliability modeling, methods of analysis and component reliability data are briefly reviewed. Application of reliability analysis techniques from a design engineering approach to improving power plant productivity is discussed. (author)

  2. Safety aspects of nuclear power plant ageing

    1990-01-01

    The nuclear community is facing new challenges as commercial nuclear power plants (NPPs) of the first generation get older. At present, some of the plants are approaching or have even exceeded the end of their nominal design life. Experience with fossil fired power plants and in other industries shows that reliability of NPP components, and consequently general plant safety and reliability, may decline in the middle and later years of plant life. Thus, the task of maintaining operational safety and reliability during the entire plant life and especially, in its later years, is of growing importance. Recognizing the potential impact of ageing on plant safety, the IAEA convened a Working Group in 1985 to draft a report to stimulate relevant activities in the Member States. This report provided the basis for the preparation of the present document, which included a review in 1986 by a Technical Committee and the incorporation of relevant results presented at the 1987 IAEA Symposium on the Safety Aspects of the Ageing and Maintenance of NPPs and in available literature. The purpose of the present document is to increase awareness and understanding of the potential impact of ageing on plant safety; of ageing processes; and of the approach and actions needed to manage the ageing of NPP components effectively. Despite the continuing growth in knowledge on the subject during the preparation of this report it nevertheless contains much that will be of interest to a wide technical and managerial audience. Furthermore, more specific technical publications on the evaluation and management of NPP ageing and service life are being developed under the Agency's programme, which is based on the recommendations of its 1988 Advisory Group on NPP ageing. Refs, figs and tabs

  3. Simulators for nuclear power plants

    Ancarani, A.; Zanobetti, D.

    1983-01-01

    The different types of simulator for nuclear power plants depend on the kind of programme and the degree of representation to be achieved, which in turn determines the functions to duplicate. Different degrees correspond to different simulators and hence to different choices in the functions. Training of nuclear power plant operators takes advantage of the contribution of simulators of various degrees of complexity and fidelity. Reduced scope simulators are best for understanding basic phenomena; replica simulators are best used for formal qualification and requalification of personnel, while modular mini simulators of single parts of a plant are best for replay and assessment of malfunctions. Another category consists of simulators for the development of assistance during operation, with the inclusion of disturbance and alarm analysis. The only existing standard on simulators is, at present, the one adopted in the United States. This is too stringent and is never complied with by present simulators. A description of possible advantages of a European standard is therefore offered: it rests on methods of measurement of basic simulator characteristics such as fidelity in values and time. (author)

  4. Public participation and trust in nuclear power development in China

    He, G.; Mol, A.P.J.; Zhang, L.; Lu, Y.

    2013-01-01

    Rapid expansion of nuclear power in China requires not only increasing institutional capacity to prevent and adequately cope with nuclear risks, but also increasing public trust in governmental agencies and nuclear enterprises managing nuclear risks. Using a case study on Haiyang nuclear power plant

  5. Occupational dose control in Nuclear Power Plants

    Viktorsson, C.; Lochard, J.; Benedittini, M.; Baum, J.; Khan, T.A.

    1990-01-01

    Reduction in occupational exposure at nuclear power plants is desirable not only in the interest of the health and safety of plant personnel, but also because it enhances the safety and reliability of the plants. This report summarises the current trends of doses to workers at nuclear power plants and the achievements and developments regarding methods for their reduction

  6. Nuclear power plant operating experience, 1976

    1977-11-01

    This report is the third in a series of reports issued annually that summarize the operating experience of U.S. nuclear power plants in commercial operation. Power generation statistics, plant outages, reportable occurrences, fuel element performance, occupational radiation exposure and radioactive effluents for each plant are presented. Summary highlights of these areas are discussed. The report includes 1976 data from 55 plants--23 boiling water reactor plants and 32 pressurized water reactor plants

  7. Power control of the Angra-2 Nuclear Power Plant

    Souza Mendes, J.E. de

    1986-01-01

    The systems for the power control of the Nuclear Power Plant Angra 2 have a high degree of automation so that few operator actions are required during power operation. The power control strategy and the operation principles of the control systems, here presented, make possible a great flexibility of the Plant operation. (Author) [pt

  8. HVDC transmission from nuclear power plant

    Yoshida, Yukio; Takenaka, Kiyoshi; Taniguchi, Haruto; Ueda, Kiyotaka

    1980-01-01

    HVDC transmission directly from a nuclear power plant is expected as one of the bulk power transmission systems from distant power generating area. Successively from the analysis of HVDC transmission from BWR-type nuclear power plant, this report discusses dynamic response characteristics of HVDC transmission (double poles, two circuits) from PWR type nuclear power plant due to dc-line faults (DC-1LG, 2LG) and ac-line faults (3LG) near inverter station. (author)

  9. Plant life extensions for German nuclear power plants? Controversial discussion profit taking of nuclear power plant operators

    Matthes, Felix C.

    2009-10-01

    The discussion on the plant life extensions for German nuclear power plants beyond the residual quantity of electricity particularly focus on three aspects: Effects for the emission of carbon dioxide as a greenhouse gas; Development of the electricity price for which a reduction or attenuation is postulated due to a plant life extension; Skimming of additional profits at operating companies and their use in the safeguarding of the future (development of renewable energies, support of energy efficiency, promotion of the research, consolidation of the public budget, and so on). Under this aspect, the author of the contribution under consideration reports on the profit taking of nuclear power plant operators. The presented analysis considers three aspects: (a) Specification of the quantity structures for the investigated model of plant life extension; (b) The decisive parameter is the revenue situation and thus the price development for electricity at wholesale markets; (c) Determination and evaluation of the course in time of the profit taking.

  10. 76 FR 20624 - Oglethorpe Power Corporation: Proposed Biomass Power Plant

    2011-04-13

    ... DEPARTMENT OF AGRICULTURE Rural Utilities Service Oglethorpe Power Corporation: Proposed Biomass Power Plant AGENCY: Rural Utilities Service, USDA. ACTION: Notice of Availability of a Draft... financial assistance to Oglethorpe Power Corporation (Oglethorpe) for the construction of a 100 megawatt (MW...

  11. Public comments on the proposed 10 CFR Part 51 rule for renewal of nuclear power plant operating licenses and supporting documents: Review of concerns and NRC staff response. Volume 1

    1996-05-01

    This report documents the Nuclear Regulatory Commission (NRC) staff review of public comments provided in response to the NRC's proposed amendments to 10 Code of Federal Regulations (CFR) Part 51, which establish new requirements for the environmental review of applications for the renewal of operating licenses of nuclear power plants. The public comments include those submitted in writing, as well as those provided at public meetings that were held with other Federal agencies, State agencies, nuclear industry representatives, public interest groups, and the general public. This report also contains the NRC staff response to the various concerns raised, and highlights the changes made to the final rule and the supporting documents in response to these concerns

  12. Power control device of an atomic power plant

    Ootsuka, Shiro; Ito, Takero.

    1980-01-01

    Purpose: To improve the power controllability of an atomic power plant by improving the controllability, response and stability of the recirculation flow rate. Constitution: The power control device comprises a power detector of the reactor, which detects and operates the reactor power from the thermal power, neutron flux or the process quantity controlling the same, and a deviation detector which seeks deviation between the power signal of the power detector and the power set value of the reactor or power station. By use of the power control device constituted in this manner, the core flow rate is regulated by the power signal of the deviation detector thereby to control the power. (Aizawa, K.)

  13. Problems of power plant capital demands

    Slechta, V.; Bohal, L.

    1986-01-01

    The problems are discussed of requirements for investment for power plants in Czechoslovakia. Since the construction was finished of coal-burning 110 MW power plants with six power units, specific capital cost has steadily been growing. The growth amounts to 6 to 8% per year while the principle has been observed that specific capital cost decreases with increased unit power. Attention is paid to the cost of the subcontractors of the building and technological parts of a power plant and to the development of productivity of labour. A comparison is tabulated of cost for coal-burning power plants with 100 MW and 200 MW units and for nuclear power plants with WWER-440 reactors. Steps are suggested leading to a reduction of the capital cost of nuclear power plants. It is stated that should not these steps be taken, the envisaged development of nuclear power would be unbearable for the Czechoslovak national economy. (Z.M.). 8 tabs., 3 refs

  14. Pipework in power plant construction

    Schwarzbach, K.

    1984-01-01

    With the development of conventional power plant construction to large unit sizes and because of the stringent safety requirements in nuclear poer stations, pipework installation has developed into a difficult operation closely inter-related with safety engineering. It is an important factor as far as completion dates and costs are concerned during the timely implementation of a subsequent construction phase which is characterized by high capital intensiveness. In order to keep both under control, prior planning and execution supported by electronic data processing are essential. (orig.) [de

  15. Design of nuclear power plants

    Lobo, C.G.

    1987-01-01

    The criteria of design and safety, applied internationally to systems and components of PWR type reactors, are described. The main criteria of the design analysed are: thermohydraulic optimization; optimized arrangement of buildings and components; low costs of energy generation; high level of standardization; application of specific safety criteria for nuclear power plants. The safety criteria aim to: assure the safe reactor shutdown; remove the residual heat and; avoid the release of radioactive elements for environment. Some exemples of safety criteria are given for Angra-2 and Angra-3 reactors. (M.C.K.) [pt

  16. 4. Nuclear power plant component failures

    1990-01-01

    Nuclear power plant component failures are dealt with in relation to reliability in nuclear power engineering. The topics treated include classification of failures, analysis of their causes and impacts, nuclear power plant failure data acquisition and processing, interdependent failures, and human factor reliability in nuclear power engineering. (P.A.). 8 figs., 7 tabs., 23 refs

  17. External man-induced events in relation to nuclear power plant design. A Safety Guide. A publication within the NUSS programme

    1996-01-01

    In order to take account of lessons learned since the first publication of the NUSS programme was issued, it was decided in 1986 to revise and reissue the Codes and Safety Guides. During the original development of these publications, as well as during the revision process, care was taken to ensure that all Member States, in particular those with active nuclear power programmes, could provide their input. Several independent reviews took place including a final one by the Nuclear Safety Standards Advisory Group (NUSSAG). The revised Codes were approved by the Board of Governors in June 1988. In the revision process new developments in technology and methods of analysis have been incorporated on the basis of international consensus. It is hoped that the revised Codes will be used, and that they will be accepted and respected by Member States as a basis for regulation of the safety of power reactors within the national legal and regulatory framework. 28 refs, 9 figs, 1 tab

  18. Nuclear power plant V-2

    1999-01-01

    In this leaflet the short history of commissioning of Bohunice V-2 NPP is reviewed (beginning of construction December 1976; First controlled reactor power, Reactor Unit 1 (RU1): 7 August 1984, Reactor Unit 2 (RU2): 2 August 1985; Connection to the grid: RU1 20 August 1984, RU2 9 August 1985; Commercial operation: RU1 14 February 1985, RU2 18 December 1985. The scheme of the nuclear reactor WWER 440/V213 is depicted. The major technological equipment are described. Principles of nuclear power plant operation safety (safety barriers, active and passive safety systems, centralized heat supply system, as well as technical data of the Bohunice V-2 NPP are presented

  19. Nuclear power plant V-1

    1999-01-01

    In this leaflet the short history of commissioning of Bohunice V-1 NPP is reviewed (beginning of construction 24 April 1972; First controlled reactor power, Reactor Unit 1 (RU1): 27 November 1978, Reactor Unit 2 (RU2): 15 March 1980; Connection to the grid: RU1 17 December 1978, RU2 26 March 1980; Commercial operation: RU1 1 April 1980, RU2 7 January 1981. The scheme of the nuclear reactor WWER 440/V230 is depicted. The major technological equipment (primary circuit, nuclear reactor, steam generators, reactor coolant pumps, primary circuit auxiliary systems, secondary circuit, turbine generators, NPP electrical equipment, and power plant control) are described. Technical data of the Bohunice V-1 NPP are presented

  20. Information Technology for Nuclear Power Plant Configuration Management

    2010-07-01

    Configuration management (CM) is an essential component of nuclear power plant design, construction and operation. The application of information technology (IT) offers a method to automate and ensure the timely and effective capture, processing and distribution of key nuclear power plant information to support CM principles and practical processes and procedures for implementation of CM at nuclear power plants. This publication reviews some of the principles established in IAEA-TECDOC-1335, 'Configuration Management in Nuclear Power Plants.' It also recaps tenets laid out in IAEA- TECDOC-1284, 'Information Technology Impact on Nuclear Power Plant Documentation' that supports CM programmes. This publication has been developed in conjunction with and designed to support these other two publications. These three publications combined provide a comprehensive discussion on configuration management, information technology and the relationship between them. An extensive discussion is also provided in this publication on the role of the design basis of the facility and its control through the CM process throughout the facility's lifetime. While this report was developed specifically for nuclear power plants, the principles discussed can be usefully applied to any high hazard nuclear facility

  1. Analysis of public attitude to nuclear power

    Trofimenko, A.P.; Pisanko, Zh.I.

    2001-01-01

    Psychological features of nuclear power public perception, reasons of anti-nuclear movement and social components of its participants are considered. The results of some public opinion polls on nuclear power are analyzed, and factors, which influence on opinion, are discussed. Arguments are presented which indicate that part population imagination about nuclear power hazard is strongly exaggerated

  2. Public attitudes toward nuclear power and the TMI accident

    Kanga, B.K.

    1983-01-01

    This paper which examines the Three Mile Island accident in the context of public reactions to the plant in the surrounding area emphasises that public attitudes to nuclear power should be discussed according to two time frames - short and long range. Public perception of safety, reliability and economy may be different in the future and the role of the nuclear industry is to operate plants safely and ensure that the public gains a clearer understanding of the essential part played by nuclear reactors in generating electricity. (NEA) [fr

  3. The atlas of large photovoltaic power plants

    Ducuing, S.; Guillier, A.; Guichard, M.A.

    2015-01-01

    This document reports all the photovoltaic power plants whose installed power is over 1 MWc and that are operating in France or in project. 446 power plants have been reviewed and their cumulated power reaches 2822 MWc. For each plant the following information is listed: the name of the municipality, the operator, the power capacity, the manufacturer of the photovoltaic panels and the type of technology used, the type of installation (on the ground, on the roof, on the facade, as sun protection,...), the yearly power output (kWh), and the date of commissioning. This review shows that 86% of these plants are ground-based. (A.C.)

  4. Evaluation of the feasibility, economic impact, and effectiveness of underground nuclear power plants. Final technical report

    1978-05-01

    Information on underground nuclear power plants is presented concerning underground nuclear power plant concepts; public health impacts; technical feasibility of underground concepts; economic impacts of underground construction; and evaluation of related issues

  5. Radioactive emission from thermal power plants

    Okamoto, K [New South Wales Univ., Kensington (Australia). Dept. of Applied Mathematics

    1981-07-01

    Radioactive hazards of the emissions and wastes of thermal power plants arising from fuel impurities of uranium and thorium are discussed. The hazard due to radioactive emission is calculated for an average Australian bituminous coal which contains 2 ppm of U and 2.7 ppm of Th. When the dust removal efficiency of a coal-fired power plant is 99%, the radioactive hazard is greater than that of a nuclear reactor of the same electrical output. After 500 years the radioactive toxicity of the coal waste will be higher than that of fission products of a nuclear reactor and after 2,000 years it will exceed the toxicity of all the nuclear wastes including actinides. The results of a recent calculation are shown, according to which the radioactive hazard of a coal-fired power plant to the public is from several hundred to several tens of thousands of times higher than that of a total fuel cycle of plutonium. It is found that in some regions, such as Japan, the hazard due to /sup 210/Po through seafood could be considerable.

  6. Fire protection in nuclear power plants

    1992-01-01

    The Code on Design (Safety Series 50-C-D (Rev. 1)) within the NUSS (Nuclear Safety Standards) programme of the IAEA points out the necessity of measures for protecting plant items which are important to safety against fires of internal and external origin. Experience of the past two decades in the operation of nuclear power plants and modern analysis techniques confirm that fire may be a real threat to nuclear safety and should receive adequate attention from the beginning of the design process throughout the life of the plant. Within the framework of the NUSS programme, a Safety Guide on fire protection had therefore been developed to enlarge on the general requirements given in the Code. Since its first publication in 1979, there has been considerable development in protection technology and analysis methods and after the Chernobyl accident it was decided to revise the existing Guide. The present Safety Guide is intended to advise designers, safety assessors and regulators on the concept of fire protection in the design of nuclear power plants and on recommended ways of implementing the concept in some detail in practice. Figs, 1 tab

  7. Nuclear power plant safety under military threats

    Stritar, A.; Mavko, B.

    1993-01-01

    The Krsko nuclear power plant in Slovenia was probably the first in the world that found itself in the middle of a war region. A number of preventive measures performed during and immediately after the war in summer 1991 by the plant personnel as well as some of related activities of the Reactor Engineering Division of the 'Jozef Stefan' Institute are described. All efforts were aimed at the minimization of the possible public radiological consequences during a military attack. The critical safety functions in such conditions were checked. Concern was further devoted to maintenance of the core cooling in the core and to integrity of the spent fuel pit. The cold shutdown mode was found to be the most appropriate option. After selecting the cold shutdown mode as a most suitable operational state of the plant, further studies of the vulnerability were done. In addition to possible direct damage to structures, that would cause release of radioactivity, two important subjects were considered: AC and DC power supply and the ultimate heat sink. A quick analysis during the crisis has shown that the consequences of a military attack against the plant by jet fighters could be serious, but with the proper preventive measures and preparedness the environmental consequences could be minimized. (Z.S.) 1 fig., 1 ref

  8. Revised inspection program for nuclear power plants

    1978-01-01

    The United States Nuclear Regulatory Commission (NRC) regulates nuclear power plants to assure adequate protection of the public and the environment from the dangers associated with nuclear materials. NRC fulfills this responsibility through comprehensive safety reviews of nuclear facilities, licensing of organizations that use nuclear materials, and continuing inspection. The NRC inspection program is currently conducted from the five regional offices in or near Philadelphia, Atlanta, Chicago, Dallas and San Francisco. Inspectors travel from the regional offices to nuclear power plants in various phases of construction, test and operation in order to conduct inspections. However, in June 1977 the Commission approved a revision to the inspection program that will include stationing inspectors at selected plants under construction and at all plants in operation. In addition, the revised program provides for appraising the performance of licensees on a national basis and involves more direct measurement and observation by NRC inspectors of work and tests in progress. The program also includes enhanced career management consisting of improved training and career development for inspectors and other professionals. The report was requested in the Conference Report on the NRC Authorization for Appropriations for Fiscal Year 1978. The report provides a discussion of the basis for both the current and revised inspection programs, describes these programs, and shows how the NRC inspection force will be trained and utilized. In addition, the report includes a discussion of the actions that will be taken to assure the objectivity of inspectors

  9. Maintenance of nuclear power plants

    Migaud, D.; Hutin, J.P.; Jouette, I.; Eymond, P.; Devie, P.; Cudelou, C.; Magnier, S.; Frydman, M.

    2016-01-01

    This document gathers different articles concerning the maintenance of the French nuclear power plants. The first article analyses the impact of the recent law on the energetic transition that sets the share of nuclear power at 50% of the electricity produced by 2025. A consequence may be the decommissioning of 17 to 20 reactors by 2025 and the huge maintenance program called 'Grand Carenage' whose aim is to extend operating life over 40 years will have to be re-considered in order to avoid useless expenses. The second article shows that in 2015 the French nuclear reactor fleet got very good results in terms of availability and safety. There were 49 scheduled outages and among them some ended ahead of time. The third article describes the specificities of the maintenance of a nuclear power plant, for instance the redundancy of some systems implies that maintenance has to deal with systems that have never functioned but must be ready to operate at any moment. Another specificity is the complexity of a nuclear power plant that implies an essential phase of preparation for maintenance operations. Because of safety requirements any maintenance operation has to be controlled, checked and may provide feedback. The fourth article presents the 'Grand Carenage' maintenance program that involves the following operations: the replacement of steam generators, the re-tubing of condensers, the replacement of the filtering drums used for cooling water, the testing of the reactor building, the hydraulic test of the primary circuit and the inspection of the reactor vessel. The fifth article focuses on the organization of the work-site for maintenance operations and the example of the Belleville-sur-Loire is described in the sixth article. Important maintenance operations like 'Grand Carenage' requires a strong collaboration with a network of specialized enterprises and as no reactor (except Flamanville EPR) is being built in France, maintenance

  10. Energy analysis and projecting of power plants

    Jirlow, K.

    1975-01-01

    Energy analysis aims at a better explanation of energy flow and energy exchange at different production processes. In this report the energy budget is analysed for separate nuclear power plants and for expanding systems of power plants. A mathematical model is developed for linear and exponential expanding of nuclear power. The profitableness for nuclear power plants in Sweden is considered to be good. (K.K.)

  11. Methodology and application of surrogate plant PRA analysis to the Rancho Seco Power Plant: Final report

    Gore, B.F.; Huenefeld, J.C.

    1987-07-01

    This report presents the development and the first application of generic probabilistic risk assessment (PRA) information for identifying systems and components important to public risk at nuclear power plants lacking plant-specific PRAs. A methodology is presented for using the results of PRAs for similar (surrogate) plants, along with plant-specific information about the plant of interest and the surrogate plants, to infer important failure modes for systems of the plant of interest. This methodology, and the rationale on which it is based, is presented in the context of its application to the Rancho Seco plant. The Rancho Seco plant has been analyzed using PRA information from two surrogate plants. This analysis has been used to guide development of considerable plant-specific information about Rancho Seco systems and components important to minimizing public risk, which is also presented herein

  12. Plant life management optimized utilization of existing nuclear power plants

    Watzinger, H.; Erve, M.

    1999-01-01

    For safe, reliable and economical nuclear power generation it is of central importance to understand, analyze and manage aging-related phenomena and to apply this information in the systematic utilization and as-necessary extension of the service life of components and systems. An operator's overall approach to aging and plant life management which also improves performance characteristics can help to optimize plant operating economy. In view of the deregulation of the power generation industry with its increased competition, nuclear power plants must today also increasingly provide for or maintain a high level of plant availability and low power generating costs. This is a difficult challenge even for the newest, most modern plants, and as plants age they can only remain competitive if a plant operator adopts a strategic approach which takes into account the various aging-related effects on a plant-wide basis. The significance of aging and plant life management for nuclear power plants becomes apparent when looking at their age: By the year 2000 roughly fifty of the world's 434 commercial nuclear power plants will have been in operation for thirty years or more. According to the International Atomic Energy Agency, as many as 110 plants will have reached the thirty-year service mark by the year 2005. In many countries human society does not push the construction of new nuclear power plants and presumably will not change mind within the next ten years. New construction licenses cannot be expected so that for economical and ecological reasons existing plants have to be operated unchallengeably. On the other hand the deregulation of the power production market is asking just now for analysis of plant life time to operate the plants at a high technical and economical level until new nuclear power plants can be licensed and constructed. (author)

  13. Operational characteristics of nuclear power plants - modelling of operational safety

    Studovic, M.

    1984-01-01

    By operational experience of nuclear power plants and realize dlevel of availability of plant, systems and componenst reliabiliuty, operational safety and public protection, as a source on nature of distrurbances in power plant systems and lessons drawn by the TMI-2, in th epaper are discussed: examination of design safety for ultimate ensuring of safe operational conditions of the nuclear power plant; significance of the adequate action for keeping proess parameters in prescribed limits and reactor cooling rquirements; developed systems for measurements detection and monitoring all critical parameters in the nuclear steam supply system; contents of theoretical investigation and mathematical modeling of the physical phenomena and process in nuclear power plant system and components as software, supporting for ensuring of operational safety and new access in staff education process; program and progress of the investigation of some physical phenomena and mathematical modeling of nuclear plant transients, prepared at faculty of mechanical Engineering in Belgrade. (author)

  14. The challenge of financing nuclear power plants

    Csik, B.J.

    1999-01-01

    To date, more then 500 nuclear power reactors have been successfully financed and built. Experience in recent nuclear projects confirms that nuclear power will not cease to be a viable option due to a worldwide financing constraint. For financing nuclear plants there are special considerations: large investment; long lead and construction times; complex technology; regulatory risk and political risk. The principal preconditions to financing are a national policy supporting nuclear power; creditworthiness; economic competitiveness; project feasibility; assurance of adequate revenues; acceptability of risks; and no open-ended liabilities. Generally, nuclear power plants are financed conventionally through multi-sources, where a package covers the entire cost. The first source, the investor/owner/operator responsible for building and operating the plant, should cover a sizable portion of the overall investment. In addition, bond issues, domestic bank credits etc. and, in case of State-owned or controlled enterprises, donations and credits from public entities or the governmental budget, should complete the financing. A financially sound utility should be able to meet this challenge. For importing technology, bids are invited. Export credits should form the basis of foreign financing, because these have favorable terms and conditions. Suppliers from several countries may join in a consortium subdividing the scope of supply and involve several Export Credit Agencies (ECAs). There are also innovative financing approaches that could be applied to nuclear projects. Evolutionary Reactors with smaller overall investment, shorter construction times, reliance on proven technology, together with predictable regulatory regimes and reliable long-term national policies favorable to nuclear power, should make it easier to meet the future challenges of financing. (author)

  15. Public acceptance of nuclear power

    Wildgruber, O.H.

    1990-01-01

    The lecture addresses the question why we need public acceptance work and provides some clues to it. It explains various human behaviour patterns which determine the basics for public acceptance. To some extent, the opposition to nuclear energy and the role the media play are described. Public acceptance efforts of industry are critically reviewed. Some hints on difficulties with polling are provided. The lecture concludes with recommendations for further public acceptance work. (author)

  16. The financing of nuclear power plants

    Taylor, M.

    2009-01-01

    Existing nuclear generating capacity plays an important role in providing secure, economic and low-carbon electricity supplies in many OECD countries. At the same time, there is increasing recognition that an expansion of nuclear power could play a valuable role in reducing future carbon dioxide emissions. However, in recent years only a handful of new nuclear power plants (NPPs) have been built in just a few OECD countries. An important reason for this is the challenges associated with financing the construction of new NPPs. The just-published NEA report entitled The Financing of Nuclear Power Plants examines these challenges. In addition, recognizing that any expansion of nuclear power programmes will require strong and sustained government support, the report highlights the role of governments in facilitating and encouraging investment in new nuclear capacity. Key actions that should be considered by governments that wish to see investment in new NPPs include: - Provide clear and sustained policy support for the development of nuclear power, by setting out the case for a nuclear component in energy supply as part of a long-term national energy strategy. - Work with electricity utilities, financial companies and other potential investors, and the nuclear industry from an early stage to address concerns that may prevent nuclear investment and to avoid mistakes in establishing the parameters for new NPPs. - Establish an efficient and effective regulatory system which provides adequate opportunities for public involvement in the decision-making process, while also providing potential investors with the certainty they require to plan such a major investment. - Put arrangements in place for the management of radioactive waste and spent fuel, and show progress towards a solution for final disposal of waste. For investors in NPPs, the financial arrangements for paying their fair share of the costs must be clearly defined. - Ensure that electricity market regulation does

  17. Provision of operational radiation protection services at nuclear power plants

    1990-01-01

    The purpose of this publication is to provide practical guidance on establishing and maintaining a radiation protection programme for a nuclear power plant that is consistent with the optimization process recommended in the Basic Safety Standards. This publication is written with a view to providing guidance to every person associated with the radiation protection programme for a nuclear power plant and develops the theme that radiation protection requires the commitment of all plant staff, including higher levels of executive management. 12 refs, 2 figs

  18. HTGR gas turbine power plant preliminary design

    Koutz, S.L.; Krase, J.M.; Meyer, L.

    1973-01-01

    The preliminary reference design of the HTGR gas turbine power plant is presented. Economic and practical problems and incentives related to the development and introduction of this type of power plant are evaluated. The plant features and major components are described, and a discussion of its performance, economics, development, safety, control, and maintenance is presented. 4 references

  19. Nuclear power plant operation 2016. Pt. 1

    Anon.

    2017-05-15

    A report is given on the operating results achieved in 2016, events important to plant safety, special and relevant repair, and retrofit measures from nuclear power plants in Germany. Reports about nuclear power plants in Belgium, Finland, the Netherlands, Switzerland, and Spain will be published in a further issue.

  20. Nuclear power plants and the environment

    Barabas, K [Ceskoslovenska Komise pro Atomovou Energii, Prague

    1978-05-01

    The environmental impacts are compared of conventional coal-fired and oil-fired power plants and of nuclear power plants. The values are compared of SO/sub 2/, NO/sub 2/, ash and soot emissions with /sup 133/Xe and /sup 85/Kr fission products release and the requirement for air for diluting these emissions in the atmosphere is assessed. Also compared are thermal pollution from an oil-fired power plant and from PWR and fast reactor power plants. The conclusion is arrived at that nuclear energy can solve the problem of increasing demand for electric and heat power while reducing negative environmental impacts.

  1. Nuclear power plants and the environment

    Barabas, K.

    1978-01-01

    The environmental impacts are compared of conventional coal-fired and oil-fired power plants and of nuclear power plants. The values are compared of SO 2 , NO 2 , ash and soot emmisions with 133 Xe and 85 Kr fission products release and the requirement for air for diluting these emissions in the atmosphere is assessed. Also compared are thermal pollution from an oil-fired power plant and from PWR and fast reactor power plants. The conclusion is arrived at that nuclear energy can solve the problem of increasing demand for electric and heat power while reducing negative environmental impacts. (O.K.)

  2. Thermal power plant design and operation

    Sarkar, Dipak

    2015-01-01

    Thermal Power Plant: Design and Operation deals with various aspects of a thermal power plant, providing a new dimension to the subject, with focus on operating practices and troubleshooting, as well as technology and design. Its author has a 40-long association with thermal power plants in design as well as field engineering, sharing his experience with professional engineers under various training capacities, such as training programs for graduate engineers and operating personnel. Thermal Power Plant presents practical content on coal-, gas-, oil-, peat- and biomass-fueled thermal power

  3. Nuclear Power Plant Outage Optimization Strategy. 2016 Edition

    2016-10-01

    This publication is an update of IAEA-TECDOC-1315, Nuclear Power Plant Outage Optimisation Strategy, which was published in 2002, and aims to communicate good outage management practices in a manner that can be used by operators and utilities in Member States. Nuclear power plant outage management is a key factor for safe and economic nuclear power plant performance. This publication discusses plant outage strategy and how this strategy is actually implemented. The main areas that are important for outage optimization that were identified by the utilities and government organizations participating in this report are: 1) organization and management; 2) outage planning and preparation; 3) outage execution; 4) safety outage review; and 5) counter measures to avoid the extension of outages and to facilitate the work in forced outages. Good outage management practices cover many different areas of work and this publication aims to communicate these good practices in a way that they can be used effectively by operators and utilities

  4. Quest for public acceptance of nuclear power

    Hill, J.

    1979-01-01

    The nuclear industry cannot progress any faster than public opinion will allow, the author contends. This is true of any new technology. The degree of disadvantage that any society will accept in new developments clearly depends on the needs of the society and the urgency of the situation. Nobody wants a lower standard of living. An assessment is made of the people who are apprehensive about nuclear power and those who are not. Of those working in the industry, the majority are completely satisfied about what they are doing; they are working in the industry by choice. These people trust and respect the engineers and scientists directing the installation. Opponents of nuclear power are the people objecting to having a nuclear plant or any other large factory near their home. Many people technically less informed are also among the dissenters; information distributed by the media does not include all the correct facts or do not make a fair presentation of the facts. The author cites hurdles that other industries have had to conquer to succeed. In spite of the criticism leveled at nuclear power, he sees it as the salvation of our prosperous and, on the whole, enjoyable industrial society. He sees steady progress with the efficiency of processes increasing year by year. He foresees further setbacks and disappointments but feels that, finally, the industry will be judged on the facts and on its achievements

  5. Financing of nuclear power plant using resources of power generation

    Slechta, V.; Milackova, H.

    1987-01-01

    It is proved that during the lifetime of a power plant, financial resources are produced from depreciation and from the profit for the delivered electrical power in an amount allowing to meet the cost of construction, interests of credits, the corporation taxes, and the means usable by the utility for simple reproduction of the power plant, additional investment, or for the ultimate decommissioning of the nuclear power plant. The considerations are simplified to 1 MW of installed capacity of a WWER-440 nuclear power plant. The breakdown is shown of the profit and the depreciation over the power plant lifetime, the resources of regular payments of credit instalments for the construction and the method of its calculation, and the income for the state budget and for the utility during the plant liofetime. (J.B.). 5 tabs., 5 refs

  6. Electric plant cost and power production expenses 1990

    1992-06-01

    Electric Plant Cost and Power Production Expenses is prepared by the Survey Management Division; Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA); US Department of Energy. This publication presents electric utility statistics on power production expenses and construction costs of electric generating plants. Data presented here are intended to provide information to the electric utility industry, educational institutions, Federal, State, and local governments, and the general public. These data are collected and published to fulfill data collection and dissemination responsibilities of the Energy Information Administration (EIA), as specified in the Federal Energy Administration Act (Public Law 93-275), as amended

  7. Electric plant cost and power production expenses 1991

    1993-01-01

    Electric Plant Cost and Power Production Expenses is prepared by the Survey Management Division; Office of Coal, Nuclear, Electric and Alternate Fuels (CNEAF); Energy Information Administration (EIA); US Department of Energy. This publication presents electric utility statistics on power production expenses and construction costs of electric generating plants. Data presented here are intended to provide information to the electric utility industry, educational institutions, Federal, State, and local governments, and the general public. These data are collected and published to fulfill data collection and dissemination responsibilities of the Energy Information Administration (EIA), as specified in the Federal Energy Administration Act (Public Law 93-275), as amended

  8. Nuclear power plants in Germany

    Hennings, U.; Stuermer, W.

    1993-01-01

    Under the influence of the polarization between belief in progress, on the one hand, and the moral rigorism of our society, on the other hand, the risks of modern large technical systems have helped the highest level of technical safety to be attained in Germany. It has been reached especially by opting for maximum quality, maximum utility and reliability, complete documentation, continuous in-service checks during operation and, last but not least, by including man and human fallibility. Our concern should be that this strategy pursued in the Western industrialized countries becomes the rule, at least in its main characteristics, also in the Eastern countries. The hazards associated with reactors in Eastern countries affect us all, and it is especially the safety of those reactors which is causing concern. The experience accumulated with the 417 nuclear power plants now in operation, especially the incidents and accidents, shows that hazard potential management is admissible only with a highly developed safety strategy. (orig.) [de

  9. Nuclear power plant annunciator systems

    Rankin, W.L.

    1983-08-01

    Analyses of nuclear power plant annunciator systems have uncovered a variety of problems. Many of these problems stem from the fact that the underlying philosophy of annunciator systems have never been elucidated so as to impact the initial annunciator system design. This research determined that the basic philosophy of an annunciator system should be to minimize the potential for system and process deviations to develop into significant hazards. In order to do this the annunciator system should alert the operators to the fact that a system or process deviation exists, inform the operators as to the priority and nature of the deviation, guide the operators' initial responses to the deviation, and confirm whether operators responses corrected the deviation. Annunciator design features were analyzed to determine to what degree they helped the system meet the functional criteria, the priority for implementing specific design features, and the cost and ease of implementing specific design features

  10. BWR type nuclear power plant

    Matsumoto, Kosuke.

    1991-01-01

    In a BWR type nuclear power plant in which reactor water in a reactor pressure vessel can be drained to a waste processing system by way of reactor recycling pipeways and remaining heat removal system pipeways, a pressurized air supply device is disposed for supplying air for pressurizing reactor water to the inside of the reactor pressure vessel by way of an upper head. With such a constitution, since the pressurized air sent from the pressurized air supply device above the reactor pressure vessel for the reactor water discharging pressure upon draining, the water draining pressure is increased compared with a conventional case and, accordingly, the amount of drained water is not reduced even in the latter half of draining. Accordingly, the draining efficiency can be improved and only a relatively short period of time is required till the completion of the draining, which can improve safety and save labors. (T.M.)

  11. Nuclear power plant component protection

    Michel, E.; Ruf, R.; Dorner, H.

    1976-01-01

    Described is a nuclear power plant installation which includes a concrete biological shield forming a pit in which a reactor pressure vessel is positioned. A steam generator on the outside of the shield is connected with the pressure vessel via coolant pipe lines which extend through the shield, the coolant circulation being provided by a coolant pump which is also on the outside of the shield. To protect these components on the outside of the shield and which are of mainly or substantially cylindrical shape, semicylindrical concrete segments are interfitted around them to form complete outer cylinders which are retained against outward separation radially from the components, by rings of high tensile steel which may be interspaced so closely that they provide, in effect, an outer steel cylinder. The invention is particularly applicable to pressurized-water coolant reactor installations

  12. Control room systems design for nuclear power plants

    NONE

    1995-07-01

    This publication provides a resource for those who are involved in researching, managing, conceptualizing, designing, manufacturing or backfitting power plant control room systems. It will also be useful to those responsible for performing reviews or evaluations of the design and facilities associated with existing power plant control room systems. The ultimate worth of the publication, however, will depend upon how well it can support its users. Readers are invited to provide comments and observations to the IAEA, Division of Nuclear Power. If appropriate, the report will subsequently be re-issued, taking such feedback into account. Refs, figs and tabs.

  13. Control room systems design for nuclear power plants

    1995-07-01

    This publication provides a resource for those who are involved in researching, managing, conceptualizing, designing, manufacturing or backfitting power plant control room systems. It will also be useful to those responsible for performing reviews or evaluations of the design and facilities associated with existing power plant control room systems. The ultimate worth of the publication, however, will depend upon how well it can support its users. Readers are invited to provide comments and observations to the IAEA, Division of Nuclear Power. If appropriate, the report will subsequently be re-issued, taking such feedback into account. Refs, figs and tabs

  14. Romanian achievement in hydro-power plants

    Cardu, M.; Bara, T.

    1998-01-01

    This paper briefly deals with the achievements relating to Hydro-electric Power Plants within the process of development of the National Power System in Romania. Also presented is the Romanian industry contribution to hydro-electrical power plant equipment manufacturing. (author)

  15. QA programs in nuclear power plants

    Ellingson, A.C.

    1976-01-01

    As an overview of quality assurance programs in nuclear power plants, the energy picture as it appears today is reviewed. Nuclear power plants and their operations are described and an attempt is made to place in proper perspective the alleged ''threats'' inherent in nuclear power. Finally, the quality assurance programs being used in the nuclear industry are described

  16. HVDC transmission from isorated nuclear power plant

    Takenaka, Kiyoshi; Takasaki, Masahiro; Ichikawa, Tatemi; Hayashi, Toshiyuki

    1985-01-01

    HVDC transmission directly from nuclear power plant is considered as one of the patterns of long distance and large capacity transmission system. This reports considers two route HVDC transmission from PWR type nuclear power plant, and analyzes dynamic response characteristics due to bus fault, main protection failure and etc. using the AC-DC Power System Simulator. (author)

  17. EPRI nuclear power plant decommissioning technology program

    Kim, Karen S.; Bushart, Sean P.; Naughton, Michael; McGrath, Richard

    2011-01-01

    The Electric Power Research Institute (EPRI) is a non-profit research organization that supports the energy industry. The Nuclear Power Plant Decommissioning Technology Program conducts research and develops technology for the safe and efficient decommissioning of nuclear power plants. (author)

  18. Stainless steels in power plant and plant construction. Papers

    1994-01-01

    The conference report comprises 14 papers on the corrosion characteristics of stainless steels in power plant and plant engineering. 9 papers are available as separate records in the ENERGY database. (MM) [de

  19. Nuclear power plants - active environment protection|

    Aegerter, I.

    1987-01-01

    The Federal Commission, which is studying energy scenarios, will doubtlessly come to the conclusion that a withdrawal from nuclear energy is technically and economically feasible. Feasibility alone however is no justification for action. Have the questions been asked correctly by the parliamentarians? Are the real problems being bypassed? Is the demand for a withdrawal from nuclear energy soundly based? Is it not oversimplified? Many people are afraid of nuclear energy because they do not understand it. It is necessary that specialists formulate their ideas so that the layman can easily understand them. The broad public can be educated to lose their fear of nuclear power plants which they compare with the nuclear bombs. They can also be educated to lose their fear of radioactivity. The public should also realize that the CO 2 problem is actual and very serious, and that nuclear energy can in fact help to alleviate this particular problem. 7 refs., 2 figs., 1 tab

  20. WWER-1000 steam generator integrity. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

    1997-07-01

    Programme was initiated by IAEA in 1990 with the aim to assist the countries of Central and Eastern Europe and former Soviet Union in evaluating the safety of their first generation WWER-440/230 nuclear power plants. The main objectives were: to identify major design and operational safety issues; to establish international consensus on priorities for safety improvements; and to provide assistance in the review of the competence and and adequacy of safety improvement programs. The scope was extended in 1992 ro include RBMK, WWER-440/312 and WWER-1000 plants in operation and under construction. Based on the operational experience of more than 90 reactor years of WWER-1000 NPPs having 80 steam generators in operation or under construction the steam generator integrity was recognized as an important issue of high safety concern. The purpose of this report is to integrate available information on the issue of WWER-1000 steam generator integrity with the focus on the steam generator cold collector damage in particular. This information covers the status of stem generators at operating plants, cause analysis of collector cracking, the damage mechanisms involved, operational aspects and corrective measures developed and implemented. Consideration is given to material, design and fabrication related aspects, operational conditions, system solutions, and in-service inspection. Detailed conclusions and recommendations are provided for each of these aspects

  1. A landscape simulation system for power plants

    Yoshinaga, Toshiaki; Yoshida, Miki; Usami, Yoshiaki.

    1997-01-01

    As scenes of power plants give many influences to environments, the plants that harmonized with the environments are demanded. We developed a landscape simulation system for the plants by using computer graphics technologies. This system has functions to generate realistic images about plant buildings and environments. Since the system contains information of ridge lines in addition to usual terrain data, the terrain shapes are expressed more precisely. Because the system enables users to visualize plant construction plans, the advance evaluations of plant scenes become possible. We regard this system as useful for environmental assessment of power plants. (author)

  2. Commissioning of the nuclear power plant

    Furtado, P.M.; Rolf, F.

    1984-01-01

    Nuclear Power Plant Angra 2, located at Itaorna Beach-Angra dos Reis is the first plant of the Brazilian-German Agreement to be commissioned. The Nuclear Power Plant is a pressurized water reactor rated at 3765 Mw thermal/1325 Mw electrical. For commissioning purpose the plant is divided into 110 systems. Plant commissioning objective is to demonstrate the safe and correct operation of each plan component, system and of the whole plant in agreement with design conditions, licensing requirements and contractual obligations. This work gives a description of plant commissioning objectives, activities their time sequence, and documentation. (Author) [pt

  3. Simulators predict power plant operation

    Peltier, R.

    2002-07-01

    Mix the complexity of a new construction or major retrofit project with today's 'do more with less', a pinch of 'personnel inexperience,' and a dash of 'unintended consequences', and you have got a recipe for insomnia. Advanced simulation tools, however, can help you wring out your design train your operators before the first wire is terminated and just may be get a good night's rest. The article describes several examples of uses of simulation tools. Esscor recently completed a simulation project for a major US utility exploring the potential for furnace/duct implosion that could result from adding higher volumetric flow induced-draft fans and selective catalytic reduction to a 650-MW coal-fired plant. CAF Electronics Inc. provided a full-scope simulator for Alstom's KA24-1 combined-cycle power plant in Paris, France. Computational fluid dynamics (CFD) tools are being used by the Gas Technology Institute to simulate the performance of the next generation of pulverized coal combustors. 5 figs.

  4. Economics of hybrid photovoltaic power plants

    Breyer, Christian

    2012-08-16

    The global power supply stability is faced to several severe and fundamental threats, in particular steadily increasing power demand, diminishing and degrading fossil and nuclear energy resources, very harmful greenhouse gas emissions, significant energy injustice and a structurally misbalanced ecological footprint. Photovoltaic (PV) power systems are analysed in various aspects focusing on economic and technical considerations of supplemental and substitutional power supply to the constraint conventional power system. To infer the most relevant system approach for PV power plants several solar resources available for PV systems are compared. By combining the different solar resources and respective economics, two major PV systems are identified to be very competitive in almost all regions in the world. The experience curve concept is used as a key technique for the development of scenario assumptions on economic projections for the decade of the 2010s. Main drivers for cost reductions in PV systems are learning and production growth rate, thus several relevant aspects are discussed such as research and development investments, technical PV market potential, different PV technologies and the energetic sustainability of PV. Three major market segments for PV systems are identified: off-grid PV solutions, decentralised small scale on-grid PV systems (several kWp) and large scale PV power plants (tens of MWp). Mainly by application of 'grid-parity' and 'fuel-parity' concepts per country, local market and conventional power plant basis, the global economic market potential for all major PV system segments is derived. PV power plant hybridization potential of all relevant power technologies and the global power plant structure are analyzed regarding technical, economical and geographical feasibility. Key success criteria for hybrid PV power plants are discussed and comprehensively analysed for all adequate power plant technologies, i.e. oil, gas and coal fired power

  5. Economics of hybrid photovoltaic power plants

    Breyer, Christian

    2012-08-16

    The global power supply stability is faced to several severe and fundamental threats, in particular steadily increasing power demand, diminishing and degrading fossil and nuclear energy resources, very harmful greenhouse gas emissions, significant energy injustice and a structurally misbalanced ecological footprint. Photovoltaic (PV) power systems are analysed in various aspects focusing on economic and technical considerations of supplemental and substitutional power supply to the constraint conventional power system. To infer the most relevant system approach for PV power plants several solar resources available for PV systems are compared. By combining the different solar resources and respective economics, two major PV systems are identified to be very competitive in almost all regions in the world. The experience curve concept is used as a key technique for the development of scenario assumptions on economic projections for the decade of the 2010s. Main drivers for cost reductions in PV systems are learning and production growth rate, thus several relevant aspects are discussed such as research and development investments, technical PV market potential, different PV technologies and the energetic sustainability of PV. Three major market segments for PV systems are identified: off-grid PV solutions, decentralised small scale on-grid PV systems (several kWp) and large scale PV power plants (tens of MWp). Mainly by application of 'grid-parity' and 'fuel-parity' concepts per country, local market and conventional power plant basis, the global economic market potential for all major PV system segments is derived. PV power plant hybridization potential of all relevant power technologies and the global power plant structure are analyzed regarding technical, economical and geographical feasibility. Key success criteria for hybrid PV power plants are discussed and comprehensively analysed for all adequate power plant technologies, i.e. oil, gas and

  6. Elecnuc. Nuclear power plants in the world

    2005-01-01

    This 2005 edition of the Elecnuc booklet summarizes in tables all numerical data relative to the nuclear power plants worldwide. These data come from the PRIS database managed by the IAEA. The following aspects are reviewed: 2004 highlights; main characteristics of reactor types; map of the French nuclear power plants on 2005/01/01; worldwide status of nuclear power plants at the end of 2004; units distributed by countries; nuclear power plants connected to the grid by reactor-type group; nuclear power plants under construction on 2004; evolution of nuclear power plant capacities connected to the grid; first electric generations supplied by a nuclear unit; electrical generation from nuclear power plants by country at the end 2004; performance indicator of PWR units in France; trend of the generation indicator worldwide; 2004 load factor by owners; units connected to the grid by countries at 12/31/2004; status of licence renewal applications in USA; nuclear power plants under construction at 12/31/2004; shutdown reactors; exported nuclear capacity in net MWe; exported and national nuclear capacity connected to the grid; exported nuclear power plants under construction or order; exported and national nuclear capacity under construction or order; recycling of plutonium in LWR; Mox licence plant projects; Appendix - historical development; acronyms, glossary

  7. Dynamic Frequency Response of Wind Power Plants

    Altin, Müfit

    according to their grid codes. In these scenarios particularly with high wind power penetration cases, conventional power plants (CPPs) such as old thermal power plants are planned to be replaced with wind power plants (WPPs). Consequently, the power system stability will be affected and the control...... to maintain sustainable and reliable operation of the power system for these targets, transmission system operators (TSOs) have revised the grid code requirements. Also, the TSOs are planning the future development of the power system with various wind penetration scenarios to integrate more wind power...... capability of WPPs would be investigated. The objective of this project is to analyze and identify the power system requirements for the synchronizing power support and inertial response control of WPPs in high wind power penetration scenarios. The dynamic frequency response of WPPs is realized...

  8. Assessment of environmental impacts of nuclear power plants

    Horacek, P.

    1990-01-01

    The effects of normal operation and of accidents are analyzed. It is pointed out that the public is insufficiently informed, which bears anxiety and prejudice. The effective dose equivalents for the population and for the individual, measured during operation of the Bohunice nuclear power plants are listed and compared with those from natural background and from medical applications. The possible radioactive contamination of a large area of agricultural soil is the highest specific risk of nuclear power plant operation. Problems are growing related to spent fuel disposal and eventually to the decommissioning of the power plant itself. (M.D.). 1 tab., 8 refs

  9. TOSHIBA CAE system for nuclear power plant

    Machiba, Hiroshi; Sasaki, Norio

    1990-01-01

    TOSHIBA aims to secure safety, increase reliability and improve efficiency through the engineering for nuclear power plant using Computer Aided Engineering (CAE). TOSHIBA CAE system for nuclear power plant consists of numbers of sub-systems which had been integrated centering around the Nuclear Power Plant Engineering Data Base (PDBMS) and covers all stage of engineering for nuclear power plant from project management, design, manufacturing, construction to operating plant service and preventive maintenance as it were 'Plant Life-Cycle CAE System'. In recent years, TOSHIBA has been devoting to extend the system for integrated intelligent CAE system with state-of-the-art computer technologies such as computer graphics and artificial intelligence. This paper shows the outline of CAE system for nuclear power plant in TOSHIBA. (author)

  10. Performance evaluation of cogeneration power plants

    Bacone, M.

    2001-01-01

    The free market has changed the criteria for measuring the cogeneration plant performances. Further at the technical-economic parameters, are considered other connected at the profits of the power plant [it

  11. Development of nuclear power plant Risk Monitor

    Yang Xiaoming; Sun Jinlong; Ma Chao; Wang Lin; Gu Xiaohui; Bao Zhenli; Qu Yong; Zheng Hao

    2014-01-01

    Risk Monitor is a tool to monitor the real-time risk of a nuclear power plant for risk management and comprehensive decision-making, which has been widely used all over the world. The nuclear power plant Risk Monitor applies the real-time risk model with low-complicacy that could reflect the plant's actual configuration, automatically reads the plant's configuration information from the engineering system through the developed interface, and efficiently analyzes the plant's risk Dy the intelligent parallel-computing method in order to provide the risk basement for the safety management of nuclear power plant. This paper generally introduces the background, architecture, functions and key technical features of a nuclear power plant Risk Monitor, and validates the risk result, which could well reflect the plant's risk information and has a significant practical value. (authors)

  12. Safety of nuclear power plants: Operation. Safety requirements

    2004-01-01

    The safety of a nuclear power plant is ensured by means of its proper siting, design, construction and commissioning, followed by the proper management and operation of the plant. In a later phase, proper decommissioning is required. This Safety Requirements publication supersedes the Code on the Safety of Nuclear Power Plants: Operation, which was issued in 1988 as Safety Series No. 50-C-O (Rev. 1). The purpose of this revision was: to restructure Safety Series No. 50-C-O (Rev. 1) in the light of the basic objectives, concepts and principles in the Safety Fundamentals publication The Safety of Nuclear Installations. To be consistent with the requirements of the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources. And to reflect current practice and new concepts and technical developments. Guidance on fulfillment of these Safety Requirements may be found in the appropriate Safety Guides relating to plant operation. The objective of this publication is to establish the requirements which, in the light of experience and the present state of technology, must be satisfied to ensure the safe operation of nuclear power plants. These requirements are governed by the basic objectives, concepts and principles that are presented in the Safety Fundamentals publication The Safety of Nuclear Installations. This publication deals with matters specific to the safe operation of land based stationary thermal neutron nuclear power plants, and also covers their commissioning and subsequent decommissioning

  13. Safety of nuclear power plants: Operation. Safety requirements

    2003-01-01

    The safety of a nuclear power plant is ensured by means of its proper siting, design, construction and commissioning, followed by the proper management and operation of the plant. In a later phase, proper decommissioning is required. This Safety Requirements publication supersedes the Code on the Safety of Nuclear Power Plants: Operation, which was issued in 1988 as Safety Series No. 50-C-O (Rev. 1). The purpose of this revision was: to restructure Safety Series No. 50-C-O (Rev. 1) in the light of the basic objectives, concepts and principles in the Safety Fundamentals publication The Safety of Nuclear Installations. To be consistent with the requirements of the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources. And to reflect current practice and new concepts and technical developments. Guidance on fulfillment of these Safety Requirements may be found in the appropriate Safety Guides relating to plant operation. The objective of this publication is to establish the requirements which, in the light of experience and the present state of technology, must be satisfied to ensure the safe operation of nuclear power plants. These requirements are governed by the basic objectives, concepts and principles that are presented in the Safety Fundamentals publication The Safety of Nuclear Installations. This publication deals with matters specific to the safe operation of land based stationary thermal neutron nuclear power plants, and also covers their commissioning and subsequent decommissioning

  14. Safety of nuclear power plants: Operation. Safety requirements

    2000-01-01

    The safety of a nuclear power plant is ensured by means of its proper siting, design, construction and commissioning, followed by the proper management and operation of the plant. In a later phase, proper decommissioning is required. This Safety Requirements publication supersedes the Code on the Safety of Nuclear Power Plants: Operation, which was issued in 1988 as Safety Series No. 50-C-O (Rev. 1). The purpose of this revision was: to restructure Safety Series No. 50-C-O (Rev. 1) in the light of the basic objectives, concepts and principles in the Safety Fundamentals publication The Safety of Nuclear Installations; to be consistent with the requirements of the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources; and to reflect current practice and new concepts and technical developments. Guidance on fulfillment of these Safety Requirements may be found in the appropriate Safety Guides relating to plant operation. The objective of this publication is to establish the requirements which, in the light of experience and the present state of technology, must be satisfied to ensure the safe operation of nuclear power plants. These requirements are governed by the basic objectives, concepts and principles that are presented in the Safety Fundamentals publication The Safety of Nuclear Installations. This publication deals with matters specific to the safe operation of land based stationary thermal neutron nuclear power plants, and also covers their commissioning and subsequent decommissioning

  15. Procedures for analysis of accidents in shutdown modes for WWER nuclear power plants. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

    1997-07-01

    Operational events occurring during shutdown conditions contribute significantly to the NPP risk due to the fact that both preventive and mitigatory capabilities of the plant are somehow degraded. The need for detailed information in the performance and review of accident analysis for WWER type NPPs was identified as a priority within IAEA Extrabudgetary Program on Safety of WWER and RBMK NPPs. The present guidelines were developed through two consultants meetings in 1995 and 1996. The guidelines establish a set of criteria for performing deterministic analysis of accidents, initiated by events occurring under shutdown conditions. This report is mostly relevant for licensing type calculations, and may to a certain extent, also used for development, improvement or justification of the plant limits and conditions, emergency operating procedures, operator training programs and probabilistic safety studies. The guidelines apply to all WWER plants in operation and/or under construction

  16. Radiation emergency preparedness in nuclear power plants

    Geetha, P.V.; Ramamirtham, B.; Khot, P.

    2008-01-01

    The purpose of planning for radiation emergency response is to ensure adequate preparedness for protection of the plant personnel and members of the public from significant radiation exposures in the unlikely event of an accident. With a number of safety features in the reactor design and sound operating procedures, the probability of a major accident resulting in the releases of large quantities of radioactivity is extremely small. However, as an abundant cautious approach a comprehensive radiation emergency response preparedness is in place in all the nuclear power plants (NPPs). Radiation Emergency in NPPs is broadly categorized into three types; plant emergency, site emergency and off-site emergency. During off site emergency conditions, based on levels of radiation in the environment, Civil Authorities may impose several counter measures such as sheltering, administering prophylaxis (stable iodine for thyroid blocking) and evacuation of people from the affected area. Environmental Survey Laboratory (ESL) carries out environmental survey extensively in the affected sector identified by the meteorological survey laboratory. To handle emergency situations, Emergency Control Centre with all communication facility and Emergency Equipment Centre having radiation measuring instruments and protective equipment are functional at all NPPs. AERB stipulates certain periodicity for conducting the exercises on plant, site and off site emergency. These exercises are conducted and deficiencies corrected for strengthening the emergency preparedness system. In the case of off site emergency exercise, observers are invited from AERB and Crisis Management Group of Department of Atomic Energy (DAE). The emergency exercises conducted by Nuclear Power Plant Sites have been very satisfactory. (author)

  17. Nuclear power and public opinion

    Anon.

    1977-01-01

    The speeches by Bethe and Alfven, delivered at the 1977 Conference in Salzburg, and the report of the World Council of Churches are surveyed, as well as the nuclear controversy and the state-of-the-art reports from various countries on public information and public acceptance of nuclear energy provision

  18. Safe operation of power plants. Pt. 1

    Freymeyer, P.

    1977-01-01

    Electrotechniques were given a dominating role in the construction of nuclear power plants. The operation of power plants - particularly nuclear power plants - is impossible without the use of electrotechnical and control means. Despite of all reserve in the development and despite of the conservative attitude it is necessary to use the newest results of development and to incite the development ot new electronic systems for the solution of these tasks. (orig.) [de

  19. Advanced power plant materials, design and technology

    Roddy, D. (ed.) [Newcastle University (United Kingdom). Sir Joseph Swan Institute

    2010-07-01

    The book is a comprehensive reference on the state of the art of gas-fired and coal-fired power plants, their major components and performance improvement options. Selected chapters are: Integrated gasification combined cycle (IGCC) power plant design and technology by Y. Zhu, and H. C. Frey; Improving thermal cycle efficiency in advanced power plants: water and steam chemistry and materials performance by B. Dooley; Advanced carbon dioxide (CO{sub 2}) gas separation membrane development for power plants by A. Basile, F. Gallucci, and P. Morrone; Advanced flue gas cleaning systems for sulphur oxides (SOx), nitrogen oxides (NOx) and mercury emissions control in power plants by S. Miller and B.G. Miller; Advanced flue gas dedusting systems and filters for ash and particulate emissions control in power plants by B.G. Miller; Advanced sensors for combustion monitoring in power plants: towards smart high-density sensor networks by M. Yu and A.K. Gupta; Advanced monitoring and process control technology for coal-fired power plants by Y. Yan; Low-rank coal properties, upgrading and utilisation for improving the fuel flexibility of advanced power plants by T. Dlouhy; Development and integration of underground coal gasification (UCG) for improving the environmental impact of advanced power plants by M. Green; Development and application of carbon dioxide (CO{sub 2}) storage for improving the environmental impact of advanced power plants by B. McPherson; and Advanced technologies for syngas and hydrogen (H{sub 2}) production from fossil-fuel feedstocks in power plants by P. Chiesa.

  20. Tasks of a power engineer in future thermal power plants

    Freymeyer, P.; Scherschmidt, F.

    1982-01-01

    Today already the power plants provide plenty of tasks and problems to the electrical engineer in the fields of power and conductive engineering. A completely new orientation of power engineering leads to larger, more complex system and even to systems unknown so far. In conductive engineering entirely new solutions have come in view. There are a lot of interesting topics for the electrical engineer in the rearrangement and advance into virgin territory of thermal power plants. (orig.) [de

  1. Nuclear Power Plants in the World

    2003-01-01

    The Japan Atomic Industrial Forum (JAIF) used every year to summarize a trend survey on the private nuclear power plants in the world in a shape of the 'Nuclear power plants in the world'. In this report, some data at the end of 2002 was made up on bases of answers on questionnaires from 65 electric power companies and other nuclear organizations in 28 countries and regions around the world by JAIF. This report is comprised of 19 items, and contains generating capacity of the plants; current status of Japan; trends of generating capacity of operating the plants, the plant orders and generating capacity of the plants; world nuclear capacity by reactor type; status of MOX use in the world; location of the plants; the plants in the world; directory of the plants; nuclear fuel cycle facilities; and so forth. (J.P.N.)

  2. Nuclear power plants in the world

    2008-01-01

    The Japan Atomic Industrial Forum, Inc. (JAIF) used every year to summarize a trend survey on the private nuclear power plants in the world in a shape of the 'Nuclear power plants in the world'. In this report, some data at the end of 2007/2008 was made up on bases of answers on questionnaires from electric power companies and other nuclear organizations around the world by JAIF. This report is comprised of 18 items, and contains generating capacity of the plants; effect of the Niigata-ken chuetsu-oki earthquake; current status of Japan; trends of generating capacity of operating the plants, the plant orders and generating capacity of the plants; world nuclear capacity by reactor type; status of MOX use in the world; location of the plants; the plants in the world; directory of the plants; nuclear fuel cycle facilities, and so forth. (J.P.N.)

  3. Nuclear Power Plants in the World

    2004-01-01

    The Japan Atomic Industrial Forum, Inc. (JAIF) used every year to summarize a trend survey on the private nuclear power plants in the world in a shape of the 'Nuclear power plants in the world'. In this report, some data at the end of 2003 was made up on bases of answers on questionnaires from 81 electric power companies and other nuclear organizations in 33 countries and regions around the world by JAIF. This report is comprised of 19 items, and contains generating capacity of the plants; current status of Japan; trends of generating capacity of operating the plants, the plant orders and generating capacity of the plants; world nuclear capacity by reactor type; status of MOX use in the world; location of the plants; the plants in the world; directory of the plants; nuclear fuel cycle facilities; and so forth. (J.P.N.)

  4. Safety prediction technique for nuclear power plants

    Henry, C.D. III; Anderson, R.T.

    1985-01-01

    This paper presents a safety prediction technique (SPT) developed by Reliability Technology Associates (RTA) for nuclear power plants. It is based on a technique applied by RTA to assess the flight safety of US Air Force aircraft. The purpose of SPT is to provide a computerized technique for objective measurement of the effect on nuclear plant safety of component failure or procedural, software, or human error. A quantification is determined, called criticality, which is proportional to the probability that a given component or procedural-human action will cause the plant to operate in a hazardous mode. A hazardous mode is characterized by the fact that there has been a failure/error and the plant, its operating crew, and the public are exposed to danger. Whether the event results in an accident, an incident, or merely the exposure to danger is dependent on the skill and reaction of the operating crew as well as external influences. There are three major uses of SPT: (a) to predict unsafe situations so that corrective action can be taken before accidents occur, (b) to quantify the impact of equipment malfunction or procedural, software, or human error on safety and thereby establish priorities for proposed modifications, and (c) to provide a means of evaluating proposed changes for their impact on safety prior to implementation and to provide a method of tracking implemented changes

  5. Qualification of nuclear power plant operations personnel

    1984-01-01

    With the ultimate aim of reducing the possibility of human error in nuclear power plant operations, the Guidebook discusses the organizational aspects, the staffing requirements, the educational systems and qualifications, the competence requirements, the ways to establish, preserve and verify competence, the specific aspects of personnel management and training for nuclear power plant operations, and finally the particular situations and difficulties to be overcome by utilities starting their first nuclear power plant. An important aspect presented in the Guidebook is the experience in training and qualification of nuclear power plant personnel in various countries: Argentina, Belgium, Canada, Czechoslovakia, France, Federal Republic of Germany, Spain, Sweden, United Kingdom and United States of America

  6. The operation of nuclear power plants

    Brosche, D.

    1992-01-01

    The duties to be performed in managing the operation of a nuclear power plant are highly diverse, as will be explained in this contribution by the examples of the Grafenrheinfeld Nuclear Power Station. The excellent safety record and the high availabilities of German nuclear power plants demonstrate that their operators have adopted the right approaches. Systematic evaluation of the operating experience accumulated inhouse and in other plants is of great significance in removing weak spots and improving operation. The manifold and complex activities in the structure of organization and of activities in a nuclear power plant require a high degree of division of labor. (orig.) [de

  7. The plant efficiency of fusion power stations

    Darvas, J.; Foerster, S.

    1976-01-01

    Due to the circulating energy, lower efficiencies are to be expected with fusion power plants than with nuclear fission power plants. According to the systems analysis, the mirror machine is not very promising as a power plant. The plant efficiency of the laser fusion strongly depends on the laser efficiency about which one can only make speculative statements at present. The Tokamak requires a relatively low circulating energy and is certainly able to compete regarding efficiency as long as the consumption time can be kept large (> 100 sec) and the dead time between the power pulses small ( [de

  8. Investigation toward laser driven IFE power plant

    Nakai, S.; Kozaki, Y.; Izawa, Y.

    2001-01-01

    Inertial fusion energy (IFE) is becoming feasible due to the increasing understanding of implosion physics. Reactor technology issues have begun to be developed. Based on the conceptual design of Laser Driven IFE Power Plant, the technical and physical issues have been examined. R and D on key issues that affect the feasibility of power plant have been proceeded taking into account the collaboration in the field of laser driver, fuel pellet, reaction chamber and system design. It is concluded that the technical feasibility of IFE power plant seems to be reasonably high. Coordination and collaboration scheme of reactor technology experts in Japan on Laser Driven IFE Power Plant is being proceeded. (author)

  9. Cooling towers of nuclear power plants

    Mikyska, L.

    1986-01-01

    The specifications are given of cooling towers of foreign nuclear power plants and a comparison is made with specifications of cooling towers with natural draught in Czechoslovak nuclear power plants. Shortcomings are pointed out in the design of cooling towers of Czechoslovak nuclear power plants which have been derived from conventional power plant design. The main differences are in the adjustment of the towers for winter operation and in the designed spray intensity. The comparison of selected parameters is expressed graphically. (J.B.)

  10. 76 FR 77963 - Oglethorpe Power Corporation; Proposed Biomass Power Plant

    2011-12-15

    ... Service Oglethorpe Power Corporation; Proposed Biomass Power Plant AGENCY: Rural Utilities Service, USDA... related to possible financial assistance to Oglethorpe Power Corporation's (Oglethorpe) for the... online at the following Web site: http://www.rurdev.usda.gov/UWP-OglethorpePower.html and at the: Warren...

  11. Summary of nuclear power plant construction

    Tamura, Saburo

    1973-01-01

    Various conditions for the construction of nuclear power plants in Japan without natural resources were investigated. Expansion of the sites of plants, change of reactor vessels, standardization of nuclear power plants, possiblity of the reduction of construction period, approaching of nuclear power plants to consuming cities, and group construction were studied. Evaluation points were safety and economy. Previous sites of nuclear power plants were mostly on plane ground or cut and enlarge sites. Proposals for underground or offshore plants have been made. The underground plants were made at several places in Europe, and the ocean plant is now approved in U.S.A. as a plant on a man-made island. Vessels for containing nuclear reactors are the last barriers to the leakage of radioactive substance. At the initial period, the vessels were made of steel, which were surrounded by shielding material. Those were dry well type containers. Then, vessel type changed to pressure-suppression type wet containers. Now, it tends to concrete (PC or RC) type containers. There is the policy on the standardization of nuclear power plants by U.S.A.E.C. in recent remarkable activity. The merit and effect of the standardization were studied, and are presented in this paper. Cost of the construction of nuclear power plants is expensive, and interest of money is large. Then, the reduction of construction period is an important problem. The situations of plants approaching to consuming cities in various countries were studied. Idea of group construction is described. (Kato, T.)

  12. Control of power plants and power systems. Proceedings

    Canales-Ruiz, R.

    1996-01-01

    The 88 papers in this volume constitute the proceedings of the International Federation of Automatic Control Symposium held in Mexico in 1995. The broad areas which they cover are: self tuning control; power plant operations; dynamic stability; fuzzy logic applications; power plants modelling; artificial intelligence applications; power plants simulation; voltage control; control of hydro electric units; state estimation; fault diagnosis and monitoring systems; system expansion and operation planning; security assessment; economic dispatch and optimal load flow; adaptive control; distribution; transient stability and preventive control; modelling and control of nuclear plant; knowledge data bases for automatic learning methods applied to power system dynamic security assessment; control of combined cycle units; power control centres. Separate abstracts have been prepared for the three papers relating to nuclear power plants. (UK)

  13. Methodology for Scaling Fusion Power Plant Availability

    Waganer, Lester M.

    2011-01-01

    Normally in the U.S. fusion power plant conceptual design studies, the development of the plant availability and the plant capital and operating costs makes the implicit assumption that the plant is a 10th of a kind fusion power plant. This is in keeping with the DOE guidelines published in the 1970s, the PNL report1, 'Fusion Reactor Design Studies - Standard Accounts for Cost Estimates. This assumption specifically defines the level of the industry and technology maturity and eliminates the need to define the necessary research and development efforts and costs to construct a one of a kind or the first of a kind power plant. It also assumes all the 'teething' problems have been solved and the plant can operate in the manner intended. The plant availability analysis assumes all maintenance actions have been refined and optimized by the operation of the prior nine or so plants. The actions are defined to be as quick and efficient as possible. This study will present a methodology to enable estimation of the availability of the one of a kind (one OAK) plant or first of a kind (1st OAK) plant. To clarify, one of the OAK facilities might be the pilot plant or the demo plant that is prototypical of the next generation power plant, but it is not a full-scale fusion power plant with all fully validated 'mature' subsystems. The first OAK facility is truly the first commercial plant of a common design that represents the next generation plant design. However, its subsystems, maintenance equipment and procedures will continue to be refined to achieve the goals for the 10th OAK power plant.

  14. Power plant engineering for overseas market

    Chun, K.S.

    1994-12-31

    Korea`s experience in power plant engineering for the overseas market is reviewed. The following topics are discussed: the Asian electric power market, ordering characteristics, country situations, and overseas market requirements.

  15. Kuroshio power plant development plan

    Chen, Falin

    2010-01-01

    As a country lacking energy reserves, Taiwan imports 99.2% of its energy, with only a small portion of indigenous energy, such as hydro, wind, and solar. In 2008, each Taiwanese spent 85,000 NTD dollars (1 USD ∝ 32 NTD) to purchase oil, coal, gas, and nuclear fuel from foreign countries, accounting for a total payment of 1.8 trillion NTD, more than the annual budget of the Taiwan government of 1.7 trillion NTD. In the same year, Taiwan emitted about 1% of the world's greenhouse gas (GHG), or 12 tons per person-year, ranking 18th globally. These situations in terms of energy security and carbon emission are very severe. To resolve these severe situations, harnessing the power of the Kuroshio in eastern Taiwan offers a great opportunity. The Kuroshio is a branch of the North Pacific Ocean current. Due to the westward-enhanced effect, this ocean current is strong and stable as it passes through eastern Taiwan. The flow rate is about 30 sverdrup (Sv) or 1000 times that of the Yangtze River, the average speed is 1 m/s, the flow direction is fixed to the north, and the flow path is close to the east coast of Taiwan. By precisely locating high-quality sites and implementing sequential works with careful planning, one can possibly generate exploitable power more than 30 GW. With 30 GW of clean energy, Taiwan could effectively enhance energy security, reduce GHG emission, and lower energy-purchasing cost. This paper proposes a feasibility study to explore the power of the Kuroshio. The content consists of four parts: (1) assessment of Kuroshio power reserves, (2) development of turbine generators, (3) development of turbine-anchor system, and (4) deep-sea marine engineering of turbine clusters. By integrating these technologies above, we propose a project to construct a 30 MW pilot plant. In this project, we also discuss the financial analysis and propose new regulations, environmental impact analysis, risk assessment, and other relevant issues. (author)

  16. Safety of nuclear power plants: Design. Safety requirements

    2000-01-01

    The present publication supersedes the Code on the Safety of Nuclear Power Plants: Design (Safety Series No. 50-C-D (Rev. 1), issued in 1988). It takes account of developments relating to the safety of nuclear power plants since the Code on Design was last revised. These developments include the issuing of the Safety Fundamentals publication, The Safety of Nuclear Installations, and the present revision of various safety standards and other publications relating to safety. Requirements for nuclear safety are intended to ensure adequate protection of site personnel, the public and the environment from the effects of ionizing radiation arising from nuclear power plants. It is recognized that technology and scientific knowledge advance, and nuclear safety and what is considered adequate protection are not static entities. Safety requirements change with these developments and this publication reflects the present consensus. This Safety Requirements publication takes account of the developments in safety requirements by, for example, including the consideration of severe accidents in the design process. Other topics that have been given more detailed attention include management of safety, design management, plant ageing and wearing out effects, computer based safety systems, external and internal hazards, human factors, feedback of operational experience, and safety assessment and verification. This publication establishes safety requirements that define the elements necessary to ensure nuclear safety. These requirements are applicable to safety functions and the associated structures, systems and components, as well as to procedures important to safety in nuclear power plants. It is expected that this publication will be used primarily for land based stationary nuclear power plants with water cooled reactors designed for electricity generation or for other heat production applications (such as district heating or desalination). It is recognized that in the case of

  17. Safety of nuclear power plants: Design. Safety requirements

    2004-01-01

    The present publication supersedes the Code on the Safety of Nuclear Power Plants: Design (Safety Series No. 50-C-D (Rev. 1), issued in 1988). It takes account of developments relating to the safety of nuclear power plants since the Code on Design was last revised. These developments include the issuing of the Safety Fundamentals publication, The Safety of Nuclear Installations, and the present revision of various safety standards and other publications relating to safety. Requirements for nuclear safety are intended to ensure adequate protection of site personnel, the public and the environment from the effects of ionizing radiation arising from nuclear power plants. It is recognized that technology and scientific knowledge advance, and nuclear safety and what is considered adequate protection are not static entities. Safety requirements change with these developments and this publication reflects the present consensus. This Safety Requirements publication takes account of the developments in safety requirements by, for example, including the consideration of severe accidents in the design process. Other topics that have been given more detailed attention include management of safety, design management, plant ageing and wearing out effects, computer based safety systems, external and internal hazards, human factors, feedback of operational experience, and safety assessment and verification. This publication establishes safety requirements that define the elements necessary to ensure nuclear safety. These requirements are applicable to safety functions and the associated structures, systems and components, as well as to procedures important to safety in nuclear power plants. It is expected that this publication will be used primarily for land based stationary nuclear power plants with water cooled reactors designed for electricity generation or for other heat production applications (such as district heating or desalination). It is recognized that in the case of

  18. Nuclear power plant cable materials :

    Celina, Mathias C.; Gillen, Kenneth T; Lindgren, Eric Richard

    2013-05-01

    A selective literature review was conducted to assess whether currently available accelerated aging and original qualification data could be used to establish operational margins for the continued use of cable insulation and jacketing materials in nuclear power plant environments. The materials are subject to chemical and physical degradation under extended radiationthermal- oxidative conditions. Of particular interest were the circumstances under which existing aging data could be used to predict whether aged materials should pass loss of coolant accident (LOCA) performance requirements. Original LOCA qualification testing usually involved accelerated aging simulations of the 40-year expected ambient aging conditions followed by a LOCA simulation. The accelerated aging simulations were conducted under rapid accelerated aging conditions that did not account for many of the known limitations in accelerated polymer aging and therefore did not correctly simulate actual aging conditions. These highly accelerated aging conditions resulted in insulation materials with mostly inert aging processes as well as jacket materials where oxidative damage dropped quickly away from the air-exposed outside jacket surface. Therefore, for most LOCA performance predictions, testing appears to have relied upon heterogeneous aging behavior with oxidation often limited to the exterior of the cable cross-section a situation which is not comparable with the nearly homogenous oxidative aging that will occur over decades under low dose rate and low temperature plant conditions. The historical aging conditions are therefore insufficient to determine with reasonable confidence the remaining operational margins for these materials. This does not necessarily imply that the existing 40-year-old materials would fail if LOCA conditions occurred, but rather that unambiguous statements about the current aging state and anticipated LOCA performance cannot be provided based on

  19. Public Reactions to New Street Tree Planting

    Ruth A. Rae

    2010-01-01

    Full Text Available MillionTreesNYC, which has the goal of planting one million trees in New York City by 2017, is intended to make New York City a greener, more sustainable city and is part of the Mayor’s comprehensive long term strategic plan, PlaNYC. Through planting a tree at every suitable sidewalk location in the city, the City of New York is transforming blocks and communities, and providing a variety of environmental, social and aesthetic benefits. This article examines the large scale municipal planting of new street trees and the reaction by some of the pubic to this planting.Trees offer benefits to the city overall, but the public may not understand these benefits or the street tree planting process. Between 2007 and 2009, the Department of Parks & Recreation planted 53,235 new street trees, and received 4,108 items of correspondence from the public. The majority of this correspondence consisted of public comments about the City’s new street tree planting policies and processes including placement objections, maintenance concerns, reports of resultant damage from tree planting operations, requests for new street trees and reports of tree conditions.This study describes the operational policies that guide New York City's municipal street tree planting, and results of content and spatial analysis of the correspondence. Qualitative analysis of the correspondence revealed the public perceptions and concerns related to the MillionTreesNYC program. Spatial analysis explored the relationship between the planting locations of new street trees and the locations of the citizen correspondence.Public reactions to this large scale municipal planting are related to the dual public and private nature of the sidewalk, issues of territoriality, responsibility, aesthetics and place attachment. Correspondence volume was associated with the scale of the new street tree block planting program, and the effectiveness of NYC’s 311 Customer Service Center. The discussion

  20. Control of renewable distributed power plants

    Bullich Massagué, Eduard

    2015-01-01

    The main objective of this master thesis is to design a power plant controller for a photo- voltaic (PV) power plant. In a first stage, the current situation of the status of the electrical grid is analysed. The electrical network structure is moving from a conventional system (with centralized power generation, unidirectional power ows, easy control) to a smart grid system consisting on distributed generation, renewable energies, smart and complex control architecture and ...

  1. Heat supply from nuclear power plants

    Stach, V [Ustav Jaderneho Vyzkumu CSKAE, Rez (Czechoslovakia)

    1978-05-01

    The current state of world power production and consumption is assessed. Prognoses made for the years 1980 to 2000 show that nuclear energy should replace the major part of fossil fuels not only in the production of power but also in the production of heat. In this respect high-temperature reactors are highly prospective. The question is discussed of the technical and economic parameters of dual-purpose heat and power plants. It is, however, necessary to solve problems arising from the safe siting of nuclear heat and power plants and their environmental impacts. The economic benefits of combined power and heat production by such nuclear plants is evident.

  2. Physical and financial virtual power plants

    Willems, Bert

    2005-01-01

    Regulators in Belgium and the Netherlands use different mechanisms to mitigate generation market power. In Belgium, antitrust authorities oblige the incumbent to sell financial Virtual Power Plants, while in the Netherlands regulators have been discussing the use of physical Virtual Power Plants. This paper uses a numerical game theoretic model to simulate the behavior of the generation firms and to compare the effects of both systems on the market power of the generators. It shows that financial Virtual Power Plants are better for society. (Author)

  3. Safety issues and their ranking for WWER-440 model 213 nuclear power plants. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

    1996-04-01

    The objective of this report is to present a consolidated list of generic safety concerns, called safety issues, ranked according to their safety significance and the corrective measures to improve safety. It is intended for use as a reference to facilitate the development of plant specific safety improvement programmes and to serve as a basis for reviewing their implementation. Section 2 provides and overview of the impact of all relevant issues on the main safety functions and other aspects important to overall plant safety. Section 3 presents safety issues identified in design according to the structure described below. Section 4 presents the safety issues in the area of operation, according to the same structure except that no ranking is given. At the end of Section 2, Tables 1 and 2 present a summary of all safety issues in a tabular form. 138 refs, tabs

  4. Nuclear Power and Radiation in Public Acceptance

    Vastchenko, S. V.

    2002-01-01

    The special knowledge deficiency does not give the possibility to the majority of people to pattern their behaviour in a correct way on radiation problems and to estimate faithfully the possible damage rate to the health of a human being from the different radiation sources effects. Studying of the public opinion in Belarus has shown that one of the results of the Chernobyl NPP accident consequences is inseparability of nuclear and radiation danger in public consciousness. The anonymous questionnaire of the inhabitants living in various Belarus regions has been carried out aiming at definition of a general radiation erudition, as well as revealing the knowledge of the population about the effect of power stations (nuclear and thermal) on the environment and the human being health. Answers on questions connected with power have shown a very poor erudition of population about ecological advantages and drawbacks inherent in thermal and nuclear power plants. The majority of the respondents (about 80%) does not know about the absence of CO 2 discharge and oxygen preservation in the air. The questionnaire analysis shows that people are exclusively frightened with radiation from NPPs, but the rest sources of radiation effect do not cause so anxiety and apprehension. People in Belarus have learnt well that the reason of the majority of the diseases is radiation, so it can be frequently heard not only from mass media, but also at scientific conferences and seminars. Most of medical workers are sure that all diseases are caused by radiation. The deficiency of special knowledge on nuclear technologies in the people majority and availability of a great amount of contradictory and untrue information supplied by mass media result in overestimation of danger from energy objects and underestimation of the increased radiation dose from other sources consequences, for example, under roentgen medical examination and treatment. The investigations carried out will help to arrange

  5. Dosimetry in nuclear power plants

    Lastra B, J. A.

    2008-12-01

    To control the occupationally exposed personnel dose working at the Laguna Verde nuclear power plant, two types of dosemeters are used, the thermoluminescent (TLD) which is processed monthly, and the direct reading dosemeter that is electronic and works as daily control of personal dose. In the case of the electronic dosemeters of direct reading conventional, the readings and dose automatic registers and the user identity to which he was assigned to each dosemeter was to carry out the restricted area exit. In activities where the ionizing radiation sources are not fully characterized, it is necessary to relocate the personal dosemeter or assigned auxiliary dosemeters (TLDs and electronics) to determine the dose received by the user to both whole body and in any specific area of it. In jobs more complicated are used a tele dosimetry system where the radiation protection technician can be monitoring the user dose to remote control, the data transmission is by radio. The dosimetry activities are documented in procedures that include dosemeter inventories realization, the equipment and dosemeters calibration, the dosimetry quality control and the discrepancies investigation between the direct reading and TLD systems. TLD dosimetry to have technical expertise in direct and indirect dosimetry and two technicians in TLD dosimetry; electronic dosimetry to have 4 calibration technicians. For the electronic dosemeters are based on a calibrator source of Cesium-137. TLD dosemeters to have an automatic radiator, an automatic reader which can read up to 100 TLD dosemeters per hour and a semiautomatic reader. To keep the equipment under a quality process was development a process of initial entry into service and carried out a periodic verification of the heating cycles. It also has a maintenance contract for the equipment directly with the manufacturer to ensure their proper functioning. The vision in perspective of the dosimetry services of Laguna Verde nuclear power plant

  6. Safety issues and their ranking for WWER-1000 model 320 nuclear power plants. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

    1996-03-01

    The objective of this report is to present a consolidated list of safety deficiencies, called safety issues, ranked according to their safety significance and the corrective measures to improve overall safety. It is intended for use as a reference to facilitate the development of plant specific safety improvement programmes and to serve as a basis for reviewing their implementation. To the extent that information was made available to the IAEA, the country/plant specific status with respect to each safety issue is described. Section 2 provides an overview of the impact of the relevant issues on the main safety functions in different operational conditions and other aspects important to overall plant safety. A summary of the safety issues and their respective ranking is given in Tables 1 and 2 at the end of Section 2. Section 3 deals with individual safety issues identified in the design which are presented according to the structure below. Section 4 presents the safety issues related to operational safety according to a similar structure but without the ranking. 73 refs, 3 tabs

  7. Safety issues and their ranking for WWER-1000 model 320 nuclear power plants. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

    1997-04-01

    The objective of this report is to present a consolidated list of safety deficiencies, called safety issues, ranked according to their safety significance and the corrective measures to improve overall safety. It is intended for use as a reference to facilitate the development of plant specific safety improvement programmes and to serve as a basis for reviewing their implementation. To the extent that information was made available to the IAEA, the country/plant specific status with respect to each safety issue is described. Section 2 provides an overview of the impact of the relevant issues on the main safety functions in different operational conditions and other aspects important to overall plant safety. A summary of the safety issues and their respective ranking is given in Tables 1 and 2 at the end of Section 2. Section 3 deals with individual safety issues identified in the design which are presented according to the structure below. Section 4 presents the safety issues related to operational safety according to a similar structure but without the ranking

  8. Radioactive waste management for German nuclear power plants

    Weh, R.; Methling, D.; Sappok, M.

    1996-01-01

    In Germany, back-end fuel cycle provisions must be made for the twenty nuclear power plants currently run by utilities with an aggregate installed power of 23.4 GWe, and the four nuclear power plants already shut down. In addition, there are the shut down nuclear power plants of the former German Democratic Republic, and a variety of decommissioned prototype nuclear power plants built with the participation of the federal government and by firms other than utilities. The nuclear power plants operated by utilities contribute roughly one third of the total electricity generation in public power plants, thus greatly ensuring a stable energy supply in Germany. The public debate in Germany, however, focuses less on the good economic performance of these plants, and the positive acceptance at their respective sites, but rather on their spent fuel and waste management which, allegedly, is not safe enough. The spent fuel and waste management of German nuclear power plants is planned on a long-term basis, and executed in a responsible way by proven technical means, in the light of the provisions of the Atomic Act. Each of the necessary steps of the back end of the fuel cycle is planned and licensed in accordance with German nuclear law provisions. The respective facilities are built, commissioned, and monitored in operation with the dedicated assistance of expert consultants and licensing authorities. Stable boundary conditions are a prerequisite in ensuring the necessary stability in planning and running waste management schemes. As producers of waste, nuclear power plants are responsible for safe waste management and remain the owners of that waste until it has been accepted by a federal repository. (orig./DG) [de

  9. Nuclear Power Plants in the World

    2000-01-01

    The Japan Atomic Industrial Forum (JAIF) used every year to summarize a trend survey on the private nuclear power plants in the world in a shape of the 'Developmental trends on nuclear power plants in the world'. In this report, some data at the end of 1999 was made up on bases of answers on questionnaires from 72 electric companies in 31 nations and regions in the world by JAIF. This report is comprised of 19 items, and contains generating capacity of the plants; current status of Japan; trends of generating capacity of operating the plants, the plant orders and generating capacity of the plants; world nuclear capacity by reactor type; location of the plants; the plants in the world; and so forth. And, it also has some survey results on the 'Liberalization of electric power markets and nuclear power generation' such as some 70% of respondents in nuclear power for future option, gas-thermal power seen as power source with most to gain from liberalization, merits on nuclear power generation (environmental considerations and supply stability), most commonly voiced concern about new plant orders in poor economy, and so forth. (G.K.)

  10. Probabilistic safety assessments of nuclear power plants for low power and shutdown modes

    2000-03-01

    Within the past several years the results of nuclear power plant operating experience and performance of probabilistic safety assessments (PSAs) for low power and shutdown operating modes have revealed that the risk from operating modes other than full power may contribute significantly to the overall risk from plant operations. These early results have led to an increased focus on safety during low power and shutdown operating modes and to an increased interest of many plant operators in performing shutdown and low power PSAs. This publication was developed to provide guidance and insights on the performance of PSA for shutdown and low power operating modes. The preparation of this publication was initiated in 1994. Two technical consultants meetings were conducted in 1994 and one in February 1999 in support of the development of this report

  11. Nuclear Power Plant Module, NPP-1: Nuclear Power Cost Analysis.

    Whitelaw, Robert L.

    The purpose of the Nuclear Power Plant Modules, NPP-1, is to determine the total cost of electricity from a nuclear power plant in terms of all the components contributing to cost. The plan of analysis is in five parts: (1) general formulation of the cost equation; (2) capital cost and fixed charges thereon; (3) operational cost for labor,…

  12. [Risk communication in construction of new nuclear power plant].

    He, Gui-Zhen; Lü, Yong-Long

    2013-03-01

    Accompanied by construction of new nuclear power plants in the coming decades in China, risk management has become increasingly politicized and contentious. Nuclear risk communication is a critical component in helping individuals prepare for, respond to, and recover from nuclear power emergencies. It was discussed that awareness of trust and public attitudes are important determinants in nuclear power risk communication and management. However, there is limited knowledge about how to best communicate with at-risk populations around nuclear power plant in China. To bridge this gap, this study presented the attitudinal data from a field survey in under-building Haiyang nuclear power plant, Shandong Province to measure public support for and opposition to the local construction of nuclear power plant. The paper discussed the structure of the communication process from a descriptive point of view, recognizing the importance of trust and understanding the information openness. The results showed that decision-making on nuclear power was dominated by a closed "iron nuclear triangle" of national governmental agencies, state-owned nuclear enterprises and scientific experts. Public participation and public access to information on nuclear constructions and assessments have been marginal and media was a key information source. As information on nuclear power and related risks is very restricted in China, Chinese citizens (51%) tend to choose the government as the most trustworthy source. More respondents took the negative attitudes toward nuclear power plant construction around home. It drew on studies about risk communication to develop some guidelines for successful risk communication. The conclusions have vast implications for how we approach risk management in the future. The findings should be of interest to state and local emergency managers, community-based organizations, public health researchers, and policy makers.

  13. Nuclear Power Plant Lifetime Management Study (I)

    Hong, Sung Yull; Jeong, Ill Seok; Jang, Chang Heui; Song, Taek Ho; Song, Woo Young [Korea Electric Power Research Institute, Taejon (Korea, Republic of); Jin, Tae Eun [Korea Power Engineering Company Consulting and Architecture Engineers, (Korea, Republic of); Kim, Woo Chul [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1997-12-31

    As the operation-year of nuclear power plant increases and finding sites for new nuclear power plant becomes harder, a comprehensive and systematic nuclear plant lifetime management(PLIM) program including life extension has to be established for stable and safe supply of electricity. A feasibility study was conducted to systematically evaluate technical, economic and regulatory aspect of plant lifetime managements and plant life extension for Kori-1 nuclear power plant. For technical evaluation of nuclear power plant, 13 major components were selected for lifetime evaluation by screening system. structure, and components(SSCs) of the plant. It was found that except reactor pressure vessel, which needs detailed integrity analysis, and low pressure turbine, which is scheduled to be replaced, 11 out of 13 major components have sufficient service life, for more than 40 years. Because domestic rules and regulations related to license renewal has not yet been written, review on the regulatory aspect of life extensions was conducted using US NRC rules and regulations. A cooperative effort with nuclear regulatory body is needed for early completion of license renewal rules and regulations. For economic evaluation of plant lifetime extension, a computer program was developed and used. It was found that 10 to 20 year of extension operation of Kori-1 nuclear power plant was proved. Based on the results, next phase of plant lifetime management program for detailed lifetime evaluation and presenting detailed implementation schedule for plant refurbishment for lifetime extension should be followed. (author). 74 refs., figs.

  14. Nuclear Power Plant Lifetime Management Study (I)

    Hong, Sung Yull; Jeong, Ill Seok; Jang, Chang Heui; Song, Taek Ho; Song, Woo Young [Korea Electric Power Research Institute, Taejon (Korea, Republic of); Jin, Tae Eun [Korea Power Engineering Company Consulting and Architecture Engineers, (Korea, Republic of); Kim, Woo Chul [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1996-12-31

    As the operation-year of nuclear power plant increases and finding sites for new nuclear power plant becomes harder, a comprehensive and systematic nuclear plant lifetime management(PLIM) program including life extension has to be established for stable and safe supply of electricity. A feasibility study was conducted to systematically evaluate technical, economic and regulatory aspect of plant lifetime managements and plant life extension for Kori-1 nuclear power plant. For technical evaluation of nuclear power plant, 13 major components were selected for lifetime evaluation by screening system. structure, and components(SSCs) of the plant. It was found that except reactor pressure vessel, which needs detailed integrity analysis, and low pressure turbine, which is scheduled to be replaced, 11 out of 13 major components have sufficient service life, for more than 40 years. Because domestic rules and regulations related to license renewal has not yet been written, review on the regulatory aspect of life extensions was conducted using US NRC rules and regulations. A cooperative effort with nuclear regulatory body is needed for early completion of license renewal rules and regulations. For economic evaluation of plant lifetime extension, a computer program was developed and used. It was found that 10 to 20 year of extension operation of Kori-1 nuclear power plant was proved. Based on the results, next phase of plant lifetime management program for detailed lifetime evaluation and presenting detailed implementation schedule for plant refurbishment for lifetime extension should be followed. (author). 74 refs., figs.

  15. Elecnuc. Nuclear power plants in the world

    2000-01-01

    This small booklet summarizes in tables all the numerical data relative to the nuclear power plants worldwide. These data come from the French CEA/DSE/SEE Elecnuc database. The following aspects are reviewed: 1999 highlights; main characteristics of the reactor types in operation, under construction or on order; map of the French nuclear power plants; worldwide status of nuclear power plants at the end of 1999; nuclear power plants in operation, under construction and on order; capacity of nuclear power plants in operation; net and gross capacity of nuclear power plants on the grid and in commercial operation; grid connection forecasts; world electric power market; electronuclear owners and share holders in EU, capacity and load factor; first power generation of nuclear origin per country, achieved or expected; performance indicator of PWR units in France; worldwide trend of the power generation indicator; 1999 gross load factor by operator; nuclear power plants in operation, under construction, on order, planned, cancelled, shutdown, and exported; planning of steam generators replacement; MOX fuel program for plutonium recycling. (J.S.)

  16. Nuclear power plant containment construction

    Schabert, H.P.; Danisch, R.; Strickroth, E.

    1975-01-01

    The Nuclear Power Plant Containment Construction includes the spherical steel safety enclosure for the reactor and the equipment associated with the reactor and requiring this type of enclosure. This steel enclosure is externally structurally protected against accident by a concrete construction providing a foundation for the steel enclosure and having a cylindrical wall and a hemispherical dome, these parts being dimensioned to form an annular space surrounding the spherical steel enclosure, the latter and the concrete construction heretofore being concentrically arranged with respect to each other. In the disclosed construction the two parts are arranged with their vertical axis horizontally offset from each other so that opposite to the offsetting direction of the concrete construction a relatively large space is formed in the now asymmetrical annular space in which reactor auxiliary equipment not requiring enclosure by the steel containment vessel or safety enclosure, may be located outside of the steel containment vessel and inside of the concrete construction where it is structurally protected by the latter

  17. Formation of public attitudes to nuclear power

    Holy, Z.J.; Innes, R.W.

    1978-01-01

    Nuclear power has been plagued by public acceptance problems. Evidence suggests one of the key factors is poor communicaton between the scientific community and the general public. Although environmental enquiries provide a forum for the voicing of views, by adopting the adversary principle they have also resulted in polarizaton of public opinion, as experienced in Australia with the Ranger Environmental Enquiry. The problem of developing methods to enable a flow of objective informaton to and from the public requires urgent solution

  18. Formation of public attitudes to nuclear power

    Holy, Z J; Innes, R W

    1978-01-01

    Nuclear power has been plagued by public acceptance problems. Evidence suggests one of the key factors is poor communicaton between the scientific community and the general public. Although environmental enquiries provide a forum for the voicing of views, by adopting the adversary principle they have also resulted in polarizaton of public opinion, as experienced in Australia with the Ranger Environmental Enquiry. The problem of developing methods to enable a flow of objective informaton to and from the public requires urgent solution.

  19. Nuclear power. Volume 1. Nuclear power plant design

    Pedersen, E.S.

    1978-01-01

    NUCLEAR POWER PLANT DESIGN is intended to be used as a working reference book for management, engineers and designers, and as a graduate-level text for engineering students. The book is designed to combine theory with practical nuclear power engineering and design experience, and to give the reader an up-to-date view of the status of nuclear power and a basic understanding of how nuclear power plants function. Volume 1 contains the following chapters; (1) nuclear reactor theory; (2) nuclear reactor design; (3) types of nuclear power plants; (4) licensing requirements; (5) shielding and personnel exposure; (6) containment and structural design; (7) main steam and turbine cycles; (8) plant electrical system; (9) plant instrumentation and control systems; (10) radioactive waste disposal (waste management) and (11) conclusion

  20. Does protecting humans protect the environment? A crude examination for UK nuclear power plants and the marine environment using information in the public domain

    Brownless, G P

    2008-01-01

    Current activity around radiological protection of the environment implies concerns over the effectiveness of the current approach to this-namely if humans are adequately protected, then so are non-human species. This study uses models and data currently available in the public domain to carry out a 'quick and dirty' examination of whether protecting humans does indeed imply that other species are well protected. Using marine discharges and human habits data for operational coastal UK nuclear power stations, this study compares doses to humans and a set of reference non-human species. The study concludes that the availability of data and models, and consequent ease of studying potential effects on non-humans (as well as humans), vindicates recent efforts in this area, and that these imply a high level of protection, in general, for non-human biota from UK nuclear power station marine discharges. In general terms, the study finds that protection of non-human biota relies on taking ingestion and external exposure doses to humans into account; where only one of these pathways is considered, the level of protection of non-human biota through protection of humans would depend on the radionuclide(s) in question.

  1. Operation of Finnish nuclear power plants

    Tossavainen, K.

    1994-03-01

    In the third quarter of 1993, all of Finland's four nuclear power plant units were in power operation, with the exception of the annual maintenance outages of the Loviisa units. The load factor average of the plant units was 83.6 %. None of the events which occurred during this annual quarter had any bearing on nuclear or radiation safety. (4 figs., 5 tabs.)

  2. Working in a virtual power plant

    Thibault, G.; Smadja, S.

    1999-01-01

    Graphical simulations on computer providing a virtual and reversible experience can now be used for maintenance in nuclear power plants allowing operations to be tested and tools to be optimised. Eventually, operatives will be trained to work in virtual nuclear power plants in complete safety. (authors)

  3. Slovak Electric, plc, Mochovce Nuclear Power Plant

    1999-01-01

    In this popular scientific brochure a brief description of construction scheme of Bohunice Nuclear Power Plant is presented. Electricity generation in a nuclear power plant is described. Instrumentation and control system as well as nuclear safety principles applied on the NPP are presented

  4. Atmospheric emissions from power plant cooling towers

    Micheletti, W.

    2006-01-01

    Power plant recirculated cooling systems (cooling towers) are not typically thought of as potential sources of air pollution. However, atmospheric emissions can be important considerations that may influence cooling tower design and operation. This paper discusses relevant U.S. environmental regulations for potential atmospheric pollutants from power plant cooling towers, and various methods for estimating and controlling these emissions. (orig.)

  5. Accidents with nuclear power plants, ch. 11

    Anon.

    1976-01-01

    A recalculation of the consequences of nuclear power plant accidents is presented taking into account different parameters or different quantities than those usually accepted. A case study of a nuclear power plant planned for the Eems-river estuary in the Netherlands is presented

  6. Slovak Electric, plc, Mochovce Nuclear Power Plant

    2000-01-01

    In this popular scientific brochure a brief description of history construction of Bohunice Nuclear Power Plant is presented. The chart of electricity generation in WWER 440/V-213 nuclear power plant is described. Operation and safety improvements at Mochovce NPP as well as environment protection are presented. Basic data of Mochovce NPP are included

  7. Quality assurance in nuclear power plant

    Magalhaes, M.T. de

    1981-01-01

    The factors related to the licensing procedures of a nuclear power plant (quality assurance and safety analysis) are presented and discussed. The consequences of inadequate attitudes towards these factors are shown and suggestions to assure the safety of nuclear power plants in Brazil are presented. (E.G.) [pt

  8. Power Transformer Application for Wind Plant Substations

    Behnke, M. R. [IEEE PES Wind Plant Collector System Design Working Group; Bloethe, W.G. [IEEE PES Wind Plant Collector System Design Working Group; Bradt, M. [IEEE PES Wind Plant Collector System Design Working Group; Brooks, C. [IEEE PES Wind Plant Collector System Design Working Group; Camm, E H [IEEE PES Wind Plant Collector System Design Working Group; Dilling, W. [IEEE PES Wind Plant Collector System Design Working Group; Goltz, B. [IEEE PES Wind Plant Collector System Design Working Group; Li, J. [IEEE PES Wind Plant Collector System Design Working Group; Niemira, J. [IEEE PES Wind Plant Collector System Design Working Group; Nuckles, K. [IEEE PES Wind Plant Collector System Design Working Group; Patino, J. [IEEE PES Wind Plant Collector System Design Working Group; Reza, M [IEEE PES Wind Plant Collector System Design Working Group; Richardson, B. [IEEE PES Wind Plant Collector System Design Working Group; Samaan, N. [IEEE PES Wind Plant Collector System Design Working Group; Schoene, Jens [IEEE PES Wind Plant Collector System Design Working Group; Smith, Travis M [ORNL; Snyder, Isabelle B [ORNL; Starke, Michael R [ORNL; Walling, R. [IEEE PES Wind Plant Collector System Design Working Group; Zahalka, G. [IEEE PES Wind Plant Collector System Design Working Group

    2010-01-01

    Wind power plants use power transformers to step plant output from the medium voltage of the collector system to the HV or EHV transmission system voltage. This paper discusses the application of these transformers with regard to the selection of winding configuration, MVA rating, impedance, loss evaluation, on-load tapchanger requirements, and redundancy.

  9. Understanding Biomass Ignition in Power Plant Mills

    Schwarzer, Lars; Jensen, Peter Arendt; Glarborg, Peter

    2017-01-01

    Converting existing coal fired power plants to biomass is a readily implemented strategy to increase the share of renewable energy. However, changing from one fuel to another is not straightforward: Experience shows that wood pellets ignite more readily than coal in power plant mills or storages...

  10. Competitive analysis of small hydroelectric power plants

    Assad, L.S.; Placido, R.

    1990-01-01

    The agreement between CPFL/UNICAMP/EFEI for developing energetic planning of Small Hydroelectric Power Plants construction is described. Some notions for showing the more economic alternative between decide by Small Hydroelectric Power Plants construction and continue supply the market by inter ligated system generation are shown in this stage of the agreement. (author)

  11. Lessons learned from existing biomass power plants

    Wiltsee, G.

    2000-02-24

    This report includes summary information on 20 biomass power plants, which represent some of the leaders in the industry. In each category an effort is made to identify plants that illustrate particular points. The project experiences described capture some important lessons learned that lead in the direction of an improved biomass power industry.

  12. Potential of light water reactors for future nuclear power plants

    Gueldner, R.

    2003-01-01

    Energy consumption worldwide is going to increase further in the next few decades. Reliable supplies of electricity can be achieved only by centralized power plant structures. In this scenario, nuclear power plants are going to play a leading role as reliable and competitive plants, also under deregulated market conditions. Today, light water reactors have achieved a leading position, both technically and economically, contributing 85% to worldwide electricity generation in nuclear plants. They will continue to be a proven technology in power generation. In many countries, activities therefore are concentrated on extending the service life of plants beyond a period of forty years. New nuclear generating capacities are expected to be created and added from the end of this decade onward. Most of this capacity will be in light water reactors. The concepts of third-generation reactors will meet all economic and technical safety requirements of the 21st century and will offer considerable potential for further development. Probably some thirty years from now, fourth-generation nuclear power plants will be ready for commercial application. These plants will penetrate especially new sectors of the energy markets. Public acceptance of new nuclear power plants is not a matter of reactor lines, provided that safety requirements are met. The important issue is the management of radioactive waste. The construction of new nuclear power plants in Western Europe and North America mainly hinges on the ability to explain to the public that there is a need for new plants and that nuclear power is fundamental to assuring sustainable development. (orig.)

  13. Management of nuclear power plants lifetime

    Hutin, J.P.

    2006-01-01

    The factors influencing the management of the service life of nuclear power plants can be of various types and the 'heaviest' ones have to be managed through robust and explicit approaches involving all actors. However, the mastery of the service life starts with the mastery of the technical problems, in particular the physical aging of the facilities. This mastery requires to foresee and anticipate the problems and thus a good understanding of the phenomena involved. This article presents: 1 - the general problem of service life management: lifetime concept, situation of French power plants, service life management policy; 2 - aging mechanisms: embrittlement of steel under irradiation, swelling of materials, thermal aging, fatigue, stress corrosion, aqueous corrosion of metals, corrosion-erosion, mechanisms of concrete degradation, mechanisms of elastomers and polymers degradation, wear; 3 - non-replaceable parts: reactor vessel, containment building; 4 - replaceable parts: cables, instrumentation and control system, core internals, primary loop piping, auxiliary primary piping, pressurizer, primary pump, steam generator tubes, other Ni-Cr-Fe alloy parts, secondary loop piping, turbine, alternator; 5 - non-technical aspects: perenniality of the industrial support, evolution of safety requirements, public acceptance, economical aspects, knowledge and information systems; 6 - situation in foreign countries: status of the world nuclear park, lifetime notion in foreign countries, situation in the USA. (J.S.)

  14. Management of delayed nuclear power plant projects

    2005-01-01

    The IAEA assists the management of organizations responsible for Nuclear Power Plant Projects with significant delays with respect to the originally scheduled commercial operation. Several Member States have Nuclear Power Plant Projects with delays of five or more years with respect to the originally scheduled commercial operation. The degree of conformance with original construction schedules shows large variations due to several issues, including financial, economic and public opinion factors. Solving the special difficulties related with a delayed NPP project is problematic and dependent on the particular country situation. However it is not regarded as an isolated national problem but as a significant issue with a number of difficulties shared by several Member States. The IAEA collects information and supports the management of delayed NPP projects by identifying main common issues, gathering available experience and addressing specific needs. On this background the IAEA is in the position to provide unique impartial assistance based upon best international practices. This enables Member States to maintain readiness for resuming the project construction when the conditions permit and to strengthen management's abilities for the completion of the project. The IAEA's service is tailored to the needs and requirements of the requesting organization, implemented on-site by international experts and addresses areas such as project control measures, human resources, updating to technological and regulatory requirements, project data, nuclear safety review, physical protection and nuclear security and preparation to resume project construction and operation

  15. Operation of Finnish nuclear power plants

    Tossavainen, K.

    1991-02-01

    During the third quarter of 1990 the Finnish nuclear power plant units Loviisa 1 and 2 and TVO I and II were in commercial operation for most of the time. The annual maintenance outages of the Loviisa plant units were held during the report period. All events during this quarter are classified as Level hero (Below Scale) on the International Nuclear Event Scale. Occupational radiation doses and external releases of radioactivity were below authorised limits. Only small amounts of radioactive substances originating in nuclear power plants were detected in samples taken in the vicinity of nuclear power plants

  16. The operating staff of nuclear power plants

    Schlegel, G.; Christ, W.

    1988-01-01

    The training of its staff is one of the pillars of the safe and economical operation of a power plant. This is why power plant owners began to systematically train their staff already in the 50s, and why they created central training facilities. Staff members who have undergone this training make an indispensable contribution to the acceptedly high safety and availability of German power plants. The substantial cost of creating training facilities and of schooling plant staff is considered to be an investment for the future. Low labour turnover permits careful observation and development of staff and leads to a high standard of knowledge and experience. (orig./HSCH) [de

  17. Harmonics in a Wind Power Plant: Preprint

    Preciado, V.; Madrigal, M.; Muljadi, E.; Gevorgian, V.

    2015-04-02

    Wind power generation has been growing at a very fast pace for the past decade, and its influence and impact on the electric power grid is significant. As in a conventional power plant, a wind power plant (WPP) must ensure that the quality of the power being delivered to the grid is excellent. At the same time, the wind turbine should be able to operate immune to small disturbances coming from the grid. Harmonics are one of the more common power quality issues presented by large WPPs because of the high switching frequency of the power converters and the possible nonlinear behavior from electric machines (generator, transformer, reactors) within a power plant. This paper presents a summary of the most important issues related to harmonics in WPPs and discusses practical experiences with actual Type 1 and Type 3 wind turbines in two WPPs.

  18. EDITORIAL: Safety aspects of fusion power plants

    Kolbasov, B. N.

    2007-07-01

    importance for the fusion power plant research programmes. The objective of this Technical Meeting was to examine in an integrated way all the safety aspects anticipated to be relevant to the first fusion power plant prototype expected to become operational by the middle of the century, leading to the first generation of economically viable fusion power plants with attractive S&E features. After screening by guest editors and consideration by referees, 13 (out of 28) papers were accepted for publication. They are devoted to the following safety topics: power plant safety; fusion specific operational safety approaches; test blanket modules; accident analysis; tritium safety and inventories; decommissioning and waste. The paper `Main safety issues at the transition from ITER to fusion power plants' by W. Gulden et al (EU) highlights the differences between ITER and future fusion power plants with magnetic confinement (off-site dose acceptance criteria, consequences of accidents inside and outside the design basis, occupational radiation exposure, and waste management, including recycling and/or final disposal in repositories) on the basis of the most recent European fusion power plant conceptual study. Ongoing S&E studies within the US inertial fusion energy (IFE) community are focusing on two design concepts. These are the high average power laser (HAPL) programme for development of a dry-wall, laser-driven IFE power plant, and the Z-pinch IFE programme for the production of an economically-attractive power plant using high-yield Z-pinch-driven targets. The main safety issues related to these programmes are reviewed in the paper `Status of IFE safety and environmental activities in the US' by S. Reyes et al (USA). The authors propose future directions of research in the IFE S&E area. In the paper `Recent accomplishments and future directions in the US Fusion Safety & Environmental Program' D. Petti et al (USA) state that the US fusion programme has long recognized that the S

  19. Proceedings: Power Plant Electric Auxiliary Systems Workshop

    1992-06-01

    The EPRI Power Plant Electric Auxiliary Systems Workshop, held April 24--25, 1991, in Princeton, New Jersey, brought together utilities, architect/engineers, and equipment suppliers to discuss common problems with power plant auxiliary systems. Workshop participants presented papers on monitoring, identifying, and solving problems with auxiliary systems. Panel discussions focused on improving systems and existing and future plants. The solutions presented to common auxiliary system problems focused on practical ideas that can enhance plant availability, reduce maintenance costs, and simplify the engineering process. The 13 papers in these proceedings include: Tutorials on auxiliary electrical systems and motors; descriptions of evaluations, software development, and new technologies used recently by electric utilities; an analysis of historical performance losses caused by power plant auxiliary systems; innovative design concepts for improving auxiliary system performance in future power plants

  20. Chemistry management system for nuclear power plants

    Nagasawa, Katsumi; Maeda, Katsuji

    1998-01-01

    Recently, the chemistry management in the nuclear power plants has been changing from the problem solution to the predictive diagnosis and maintenance. It is important to maintain the integrity of plant operation by an adequate chemistry control. For these reasons, many plant operation data and chemistry analysis data should be collected and treated effectively to evaluate chemistry condition of the nuclear power plants. When some indications of chemistry anomalies occur, quick and effective root cause evaluation and countermeasures should be required. The chemistry management system has been developed as to provide sophisticate chemistry management in the nuclear power plants. This paper introduces the concept and functions of the chemistry management system for the nuclear power plants. (author)