Making Industry Part of the Climate Solution

Energy Technology Data Exchange (ETDEWEB)

Lapsa, Melissa Voss [ORNL; Brown, Dr. Marilyn Ann [Georgia Institute of Technology; Jackson, Roderick K [ORNL; Cox, Matthew [Georgia Institute of Technology; Cortes, Rodrigo [Georgia Institute of Technology; Deitchman, Benjamin H [ORNL

2011-06-01

Improving the energy efficiency of industry is essential for maintaining the viability of domestic manufacturing, especially in a world economy where production is shifting to low-cost, less regulated developing countries. Numerous studies have shown the potential for significant cost-effective energy-savings in U.S. industries, but the realization of this potential is hindered by regulatory, information, workforce, and financial obstacles. This report evaluates seven federal policy options aimed at improving the energy efficiency of industry, grounded in an understanding of industrial decision-making and the barriers to efficiency improvements. Detailed analysis employs the Georgia Institute of Technology's version of the National Energy Modeling System and spreadsheet calculations, generating a series of benefit/cost metrics spanning private and public costs and energy bill savings, as well as air pollution benefits and the social cost of carbon. Two of the policies would address regulatory hurdles (Output-Based Emissions Standards and a federal Energy Portfolio Standard with Combined Heat and Power); three would help to fill information gaps and workforce training needs (the Superior Energy Performance program, Implementation Support Services, and a Small Firm Energy Management program); and two would tackle financial barriers (Tax Lien Financing and Energy-Efficient Industrial Motor Rebates). The social benefit-cost ratios of these policies appear to be highly favorable based on a range of plausible assumptions. Each of the seven policy options has an appropriate federal role, broad applicability across industries, utilizes readily available technologies, and all are administratively feasible.

Educated consumers don’t believe artificial meat is the solution to the problems with the meat industry

OpenAIRE

Hocquette , Aurélie; Lambert , Carla; Sinquin , Clémentine; Peterolff , Laure; Wagner , Zoé; ,; Lebert , André; Hocquette , Jean-François

2015-01-01

The production of in vitro meat by cell culture has been suggested by some scientists as one solution to address the major challenges facing our society. Firstly, consumers would like the meat industry to reduce potential discomfort of animals on modern farms, or even to avoid killing animals to eat them. Secondly, citizens would like meat producers to reduce potential environmental deterioration by livestock and finally, there is a need to reduce world hunger by increasing pro...

Project-service Solutions in the Yacht Industry: a Value-Chain Analysis

Directory of Open Access Journals (Sweden)

Davide Aloini

2013-10-01

economic trend, in particular throughout the delivery of integrated project-service solutions in all project life cycle stages. Innovative value offerings encompass a complex network of suppliers and subcontractors that is not stable and is arranged in a sporadic and unpredictable manner. Multiple case studies in the yacht industry were conducted to explore the configuration of project-service solutions. The research constitutes an original contribution to studies on servitization adoption in an industrial project context from an inter-organizational perspective. It emerged that SMEs reorganize themselves, in order to provide flexible on-demand solutions to customers, by including all the capabilities within their network. Newly arising professional roles are oriented to the implementation of smart networks and are focused on service infusion in order to provide increased customer value.

Assessment of risk of potential exposures on facilities industries

International Nuclear Information System (INIS)

Leocadio, Joao Carlos

2007-03-01

This work develops a model to evaluate potential exposures on open facilities of industrial radiography in Brazil. This model will decisively contribute to optimize operational, radiological protection and safety procedures, to prevent radiation accidents and to reduce human errors in industrial radiography. The probabilistic safety assessment (PSA) methodology was very useful to assess potential exposures. The open facilities of industrial radiography were identified as the scenario to be analyzed in what concerns the evaluation of potential exposures, due to their high accidents indices. The results of the assessment of potential exposures confirm that the industrial radiography in Brazil is a high-risk practice as classified by the IAEA. The risk of potential exposure was estimated to be 40,5 x 10 -2 per year in Brazil, having as main consequences injuries to the workers' hands and arms. In the world scene, the consequences are worst, leading to fatalities of people, thus emphasizing the high risk of industrial radiography. (author)

Graphene for energy solutions and its industrialization

Science.gov (United States)

Wei, Di; Kivioja, Jani

2013-10-01

Graphene attracts intensive interest globally across academia and industry since the award of the Nobel Prize in Physics 2010. Within the last half decade, there has been an explosion in the number of scientific publications, patents and industry projects involved in this topic. On the other hand, energy is one of the biggest challenges of this century and related to the global sustainable economy. There are many reviews on graphene and its applications in various devices, however, few of the review articles connect the intrinsic properties of graphene with its energy. The IUPAC definition of graphene refers to a single carbon layer of graphite structure and its related superlative properties. A lot of scientific results on graphene published to date are actually dealing with multi-layer graphenes or reduced graphenes from insulating graphene oxides (GO) which contain defects and contaminants from the reactions and do not possess some of the intrinsic physical properties of pristine graphene. In this review, the focus is on the most recent advances in the study of pure graphene properties and novel energy solutions based on these properties. It also includes graphene metrology and analysis of both intellectual property and the value chain for the existing and forthcoming graphene industry that may cause a new `industry revolution' with the strong and determined support of governments and industries across the European Union, U. S., Asia and many other countries in the world.

State of the Art in LP-WAN Solutions for Industrial IoT Services.

Science.gov (United States)

Sanchez-Iborra, Ramon; Cano, Maria-Dolores

2016-05-17

The emergence of low-cost connected devices is enabling a new wave of sensorization services. These services can be highly leveraged in industrial applications. However, the technologies employed so far for managing this kind of system do not fully cover the strict requirements of industrial networks, especially those regarding energy efficiency. In this article a novel paradigm, called Low-Power Wide Area Networking (LP-WAN), is explored. By means of a cellular-type architecture, LP-WAN-based solutions aim at fulfilling the reliability and efficiency challenges posed by long-term industrial networks. Thus, the most prominent LP-WAN solutions are reviewed, identifying and discussing the pros and cons of each of them. The focus is also on examining the current deployment state of these platforms in Spain. Although LP-WAN systems are at early stages of development, they represent a promising alternative for boosting future industrial IIoT (Industrial Internet of Things) networks and services.

State of the Art in LP-WAN Solutions for Industrial IoT Services

Directory of Open Access Journals (Sweden)

Ramon Sanchez-Iborra

2016-05-01

Full Text Available The emergence of low-cost connected devices is enabling a new wave of sensorization services. These services can be highly leveraged in industrial applications. However, the technologies employed so far for managing this kind of system do not fully cover the strict requirements of industrial networks, especially those regarding energy efficiency. In this article a novel paradigm, called Low-Power Wide Area Networking (LP-WAN, is explored. By means of a cellular-type architecture, LP-WAN–based solutions aim at fulfilling the reliability and efficiency challenges posed by long-term industrial networks. Thus, the most prominent LP-WAN solutions are reviewed, identifying and discussing the pros and cons of each of them. The focus is also on examining the current deployment state of these platforms in Spain. Although LP-WAN systems are at early stages of development, they represent a promising alternative for boosting future industrial IIoT (Industrial Internet of Things networks and services.

Osmotic potential calculations of inorganic and organic aqueous solutions over wide solute concentration levels and temperatures

Energy Technology Data Exchange (ETDEWEB)

Cochrane, T. T., E-mail: agteca@hotmail.com [AGTECA S.A., 230 Oceanbeach Road, Mount Maunganui, Tauranga 3116 (New Zealand); Cochrane, T. A., E-mail: tom.cochrane@canterbury.ac.nz [Department of Civil and Natural Resources Engineering, University of Canterbury, Private Bag 4800, Christchurch 8140 (New Zealand)

2016-01-15

Purpose: To demonstrate that the authors’ new “aqueous solution vs pure water” equation to calculate osmotic potential may be used to calculate the osmotic potentials of inorganic and organic aqueous solutions over wide ranges of solute concentrations and temperatures. Currently, the osmotic potentials of solutions used for medical purposes are calculated from equations based on the thermodynamics of the gas laws which are only accurate at low temperature and solute concentration levels. Some solutions used in medicine may need their osmotic potentials calculated more accurately to take into account solute concentrations and temperatures. Methods: The authors experimented with their new equation for calculating the osmotic potentials of inorganic and organic aqueous solutions up to and beyond body temperatures by adjusting three of its factors; (a) the volume property of pure water, (b) the number of “free” water molecules per unit volume of solution, “N{sub f},” and (c) the “t” factor expressing the cooperative structural relaxation time of pure water at given temperatures. Adequate information on the volume property of pure water at different temperatures is available in the literature. However, as little information on the relative densities of inorganic and organic solutions, respectively, at varying temperatures needed to calculate N{sub f} was available, provisional equations were formulated to approximate values. Those values together with tentative t values for different temperatures chosen from values calculated by different workers were substituted into the authors’ equation to demonstrate how osmotic potentials could be estimated over temperatures up to and beyond bodily temperatures. Results: The provisional equations formulated to calculate N{sub f}, the number of free water molecules per unit volume of inorganic and organic solute solutions, respectively, over wide concentration ranges compared well with the calculations of N{sub f

Osmotic potential calculations of inorganic and organic aqueous solutions over wide solute concentration levels and temperatures

International Nuclear Information System (INIS)

Cochrane, T. T.; Cochrane, T. A.

2016-01-01

Purpose: To demonstrate that the authors’ new “aqueous solution vs pure water” equation to calculate osmotic potential may be used to calculate the osmotic potentials of inorganic and organic aqueous solutions over wide ranges of solute concentrations and temperatures. Currently, the osmotic potentials of solutions used for medical purposes are calculated from equations based on the thermodynamics of the gas laws which are only accurate at low temperature and solute concentration levels. Some solutions used in medicine may need their osmotic potentials calculated more accurately to take into account solute concentrations and temperatures. Methods: The authors experimented with their new equation for calculating the osmotic potentials of inorganic and organic aqueous solutions up to and beyond body temperatures by adjusting three of its factors; (a) the volume property of pure water, (b) the number of “free” water molecules per unit volume of solution, “N f ,” and (c) the “t” factor expressing the cooperative structural relaxation time of pure water at given temperatures. Adequate information on the volume property of pure water at different temperatures is available in the literature. However, as little information on the relative densities of inorganic and organic solutions, respectively, at varying temperatures needed to calculate N f was available, provisional equations were formulated to approximate values. Those values together with tentative t values for different temperatures chosen from values calculated by different workers were substituted into the authors’ equation to demonstrate how osmotic potentials could be estimated over temperatures up to and beyond bodily temperatures. Results: The provisional equations formulated to calculate N f , the number of free water molecules per unit volume of inorganic and organic solute solutions, respectively, over wide concentration ranges compared well with the calculations of N f using recorded

"We're Part of the Solution": Evolution of the Food and Beverage Industry's Framing of Obesity Concerns Between 2000 and 2012.

Science.gov (United States)

Nixon, Laura; Mejia, Pamela; Cheyne, Andrew; Wilking, Cara; Dorfman, Lori; Daynard, Richard

2015-11-01

We investigated how industry claim-makers countered concerns about obesity and other nutrition-related diseases in newspaper coverage from 2000, the year before the US Surgeon General's Call to Action on obesity, through 2012. We found that the food and beverage industry evolved in its response. The defense arguments were made by trade associations, industry-funded nonprofit groups, and individual companies representing the packaged food industry, restaurants, and the nonalcoholic beverage industry. Individual companies used the news primarily to promote voluntary self-regulation, whereas trade associations and industry-supported nonprofit groups directly attacked potential government regulations. There was, however, a shift away from framing obesity as a personal issue toward an overall message that the food and beverage industry wants to be "part of the solution" to the public health crisis.

Potential for energy efficiency in the Norwegian land-based industry; Potensial for energieffektivisering i norsk landbasert industri

Energy Technology Data Exchange (ETDEWEB)

2009-07-01

Process Industry Association (PIL, now the Federation of Norwegian Industries) conducted in collaboration with Enova SF, Kjelforeningen - Norwegian Energy and Institute for Energy Technology, in 2002 a study to determine the potential for more environmentally efficient energy use and production in the Norwegian process industry. It was in 2007 conducted a review of the 2002-study, and this work showed that large parts of the potential identified in 2002 were not realized, and that in addition there was further potential. Enova therefore took the initiative in 2009 to do a new review of the potential for energy efficiency in the Norwegian industry. (AG)

Universal Industrial Solution and Industrial Sectors Module for Pulp and Paper Sector

Science.gov (United States)

Increased concerns over air pollution and its detrimental effects on health have called for more stringent emission reduction strategies in the industrial sector. However, stringent regulatory policies can potentially adversely affect domestic and international trade. Therefore E...

ALGORITHM OF SELECTION EFFECTIVE SOLUTIONS FOR REPROFILING OF INDUSTRIAL BUILDINGS

Directory of Open Access Journals (Sweden)

MENEJLJUK A. I.

2016-08-01

Full Text Available Raising of problem.Non-compliance requirements of today's industrial enterprises, which were built during the Soviet period, as well as significant technical progress, economic reform and transition to market principles of performance evaluation leading to necessity to change their target and functionality. The technical condition of many industrial buildings in Ukraine allows to exploit them for decades.Redesigning manufacturing enterprises allows not only to reduce the cost of construction, but also to obtain new facilities in the city. Despite the large number of industrial buildings that have lost their effectiveness and relevance, as well as a significant investor interest in these objects, the scope of redevelopment in the construction remains unexplored. Analysis researches on the topic. The problem of reconstruction of industrial buildings considered in Topchy D. [3], Travin V. [9], as well as in the work of other scientists. However, there are no rules in regulatory documents and system studies for improving the organization of the reconstruction of buildings at realigning. The purpose of this work is the development an algorithm of actions for selection of effective organizational decisions at the planning stage of a reprofiling project of industrial buildings. The proposed algorithm allows you to select an effective organizational and technological solution for the re-profiling of industrial buildings, taking into account features of the building, its location, its state of structures and existing restrictions. The most effective organizational solution allows realize the reprofiling project of an industrial building in the most possible short terms and with the lowest possible use of material resources, taking into account the available features and restrictions. Conclusion. Each object has a number of unique features that necessary for considering at choosing an effective reprofiling variant. The developed algorithm for selecting

The Internet Marketing Solution Toward Creative Industries in Bandung

OpenAIRE

Aditya M Salya

2010-01-01

This paper discribe a role of internet marketing toward creative industries in Bandung. How Internet Marketing can help the creative industries to access the market through internet. Bandung, as emerging city for creative industries in Indonesia has shown the great developent of small medium entreprise, that create the potential market. We highlight what is the tools of internet marketing as promotion that make customer interest to buy the product and at the end the impact of internet marketi...

Autonomous path planning solution for industrial robot manipulator using backpropagation algorithm

Directory of Open Access Journals (Sweden)

PeiJiang Yuan

2015-12-01

Full Text Available Here, we propose an autonomous path planning solution using backpropagation algorithm. The mechanism of movement used by humans in controlling their arms is analyzed and then applied to control a robot manipulator. Autonomous path planning solution is a numerical method. The model of industrial robot manipulator used in this article is a KUKA KR 210 R2700 EXTRA robot. In order to show the performance of the autonomous path planning solution, an experiment validation of path tracking is provided. Experiment validation consists of implementation of the autonomous path planning solution and the control of physical robot. The process of converging to target solution is provided. The mean absolute error of position for tool center point is also analyzed. Comparison between autonomous path planning solution and the numerical methods based on Newton–Raphson algorithm is provided to demonstrate the efficiency and accuracy of the autonomous path planning solution.

New solution for transport and industrial noise protection through reflective noise barriers

Directory of Open Access Journals (Sweden)

Kralov Ivan

2017-01-01

Full Text Available A new solution for protection of transportation and industrial noise through reflective noise barriers is proposed and investigated in this study. The new solution combines the advantages of the known barriers and has its own advantages in addition. The preliminary results show a very good level of noise reduction for this type of barriers.

Universal industrial sectors integrated solutions module for the pulp and paper industry.

Science.gov (United States)

Bhander, Gurbakhash; Jozewicz, Wojciech

2017-09-01

The U.S. is the world's second-leading producer of pulp and paper products after China. Boilers, recovery furnaces, and lime kilns are the dominant sources of emissions from pulp and paper mills, collectively accounting for more than 99 % of the SO 2 , almost 96 % of the NO X , and more than 85 % of the particulate matter (PM) emitted to the air from this sector in the U.S. The process of developing industrial strategies for managing emissions can be made efficient, and the resulting strategies more cost-effective, through the application of modeling that accounts for relevant technical, environmental and economic factors. Accordingly, the United States Environmental Protection Agency is developing the Universal Industrial Sectors Integrated Solutions module for the Pulp and Paper Industry (UISIS-PNP). It can be applied to evaluate emissions and economic performance of pulp and paper mills separately under user-defined pollution control strategies. In this paper, we discuss the UISIS-PNP module, the pulp and paper market and associated air emissions from the pulp and paper sector. After illustrating the sector-based multi-product modeling structure, a hypothetical example is presented to show the engineering and economic considerations involved in the emission-reduction modeling of the pulp and paper sector in the U.S.

Preliminary Development of Conductivity based Test Method for Industrial Radiography Film Developer Solution

International Nuclear Information System (INIS)

Zainuddin, N.S.; Manah, N.S.A.; Khairul Anuar Mohd Salleh; Noorhazleena Azaman

2015-01-01

The strength of industrial radiography film developer solution is one of the most important aspects in radiography film processing. The developer solution reacts with the exposed film to visualize the latent image through chemical-film reaction. As the developer is repeatedly used, the strength decreases until a point where it cannot yield the required film optical density value. This work attempts to investigate the developer solution strength through its conductivity. Obtained data are cross correlated to the required industrial radiography optical density range. Through the experiment, the conductivity of the developer solution decreased as the number of the film processed increase. Thus, the desired optical density of the film cannot be achieved. The conductivity of developer is measured and recorded at interval of six films developed. The optical density of every film is recorded to analyze the change in optical density as the conductivity decreases. Through the procedure, it is suggested that as the conductivity decreases, the optical density of film decreased. Ultimately, the strength level of the developer solution can be determined. (author)

The potential and acceptance of exoskeletons in industry

NARCIS (Netherlands)

de Looze, Michiel P.; Krause, Frank; O’Sullivan, Leonard W.

2017-01-01

Worldwide, a significant interest in wearable robots or exoskeletons does exist, also from an industrial background. This paper provides an overview of assistive exoskeletons that have specifically been developed for industrial purposes. It discusses their potential in increasing performance and

Potential environmental effects of energy conservation measures in northwest industries

Energy Technology Data Exchange (ETDEWEB)

Baechler, M C; Gygi, K F; Hendrickson, P L

1992-01-01

The Bonneville Power Administration (Bonneville) has identified 101 plants in the Pacific Northwest that account for 80% of the region's industrial electricity consumption. These plants offer a precise target for a conservation program. PNL determined that most of these 101 plants were represented by 11 major industries. We then reviewed 36 major conservation technologies used in these 11 industrial settings to determine their potential environmental impacts. Energy efficiency technologies designed for industrial use may result in direct or indirect environmental impacts. Effects may result from the production of the conservation measure technology, changes in the working environment due to different energy and material requirements, or changes to waste streams. Industry type, work-place conditions, worker training, and environmental conditions inside and outside the plant are all key variables that may affect environmental outcomes. To address these issues this report has three objectives: Describe potential conservation measures that Bonneville may employ in industrial programs and discuss potential primary impacts. Characterize industrial systems and processes where the measure may be employed and describe general environmental issues associated with each industry type. Review environmental permitting, licensing, and other regulatory actions required for industries and summarize the type of information available from these sources for further analysis.

Potential for greenhouse gas reduction in industry through increased heat recovery and/or integration of combined heat and power

International Nuclear Information System (INIS)

Axelsson, H.; Harvey, S.; Aasblad, A.; Berntsson, T.

2003-01-01

The potential for greenhouse gas (GHG) reduction in industry through process integration measures depends to a great extent on prevailing technical and economic conditions. A step-wise methodology developed at the author's department based on pinch technology was used to analyse how various parameters influence the cost-optimal configuration for the plant's energy system, and the opportunities for cost-effective GHG emissions reduction compared to this solution. The potential for reduction of GHG emissions from a given plant depends primarily on the design of the industrial process and its energy system (internal factors) and on the electricity-to-fuel price ratio and the specific GHG emissions from the national power generation system (external factors)

Potential of the Russian forests and forest industries

Energy Technology Data Exchange (ETDEWEB)

Anttonen, T.; Petrov, A.P. [eds.

1997-12-31

The publication contains the proceedings of the seminar `Potential of the Russian Forests and Forest Industries` held in Moscow, May 14-16, 1997. The seminar was one step along the road to spread knowledge and become acquainted with forestry and forest industries in northern Europe and Russia. The seminar proceedings contain a lot of fresh information concerning forestry and forest industries in Russia. Both have undergone many changes and reforms during the last few years

Impact of Industrialization on Environment and Sustainable Solutions - Reflections from a South Indian Region

Science.gov (United States)

Patnaik, Rasmi

2018-03-01

Industrialization has brought economic prosperity; additionally it has resulted in more population, urbanization, obvious stress on the basic life supporting systems while pushing the environmental impacts closer to the threshold limits of tolerance. With booming industrial growth and relatively low land mass, environmental sustainability is now becoming a significant deciding factor in industrial development process. Accumulating evidences constantly indicate that the transition of the existing industries into eco-industrial network through successful implementation of green approaches provides a viable solution to preserve the natural resources of the region while concurrently enhances the regional economy on a sustainable basis. It calls for an appropriate planning and integrated framework in harmony with the environment, after careful assessment of past and prevailing conditions. The empirical knowledge on affected area helps understanding the local context and developing further course of action based on ground realities. With this aim, a study was conducted on the current industrial pollution and environmental setting of Puducherry. A causal chain analysis indicated severe impacts of industrialization on local environment while highlighting its immediate and root causes. The findings form a base for suggesting sustainable solutions to curb rampant pollution in Puducherry region and similar scenarios found across the world.

Institutionalization of Organized Industrial Estates in Turkey, Problems Encountered and Proposed Solutions

Directory of Open Access Journals (Sweden)

Hasan DAĞLAR

2015-12-01

Full Text Available In the aim of the study is to determine the institutionalization degree of organized industrial estates and to identify the faced problems and to develop solutions for these problems. By using survey method, information about problems and institutionalization status of organized industrial estates were obtained from managers of the active organized industrial estates. The problems of organized industrial estates are related to the management structure, qualified staff, energy, transportation, regulation and public improvements. Formalization, professionalism, accountability, transparency and social responsibility have been identified as the factors about the institutionalization of organized industrial estates in Turkey according to factor analysis. It could be argued that organized industrial estates in Turkey have an institutional structure and they have institutionalized. However, it could be said that organized industrial estates which operate in 80 cities of Turkey and more than one are in some cities are not at the same level of institutionalization.

The Potential of NORM in Non-Nuclear Industry in Indonesia

International Nuclear Information System (INIS)

Kunto Wiharto; Syarbaini

2003-01-01

Industry with an activity of processing natural resources from crust of earth as raw materials could cause natural radioactivity in crust of earth to be accumulated in waste, by product and or main product of that industry. Natural radioactive elements which are mobilized and then accumulated in end industry process are known as NORM (Naturally Occurring Radioactive Materials). NORM have a potential radiological impact such as external and internal radiation exposure. Therefore, the existence of NORM in these non-nuclear industries should be studied in order to handle properly the radiological impact of those material to the industrial workers, member of the public and the surrounding environment. This paper describes the non nuclear industrial sectors in Indonesia that have potential NORM sources and radiation safety aspects in connecting with NORM. (author)

Cosmological solutions in string theory with dilaton self interaction potential

International Nuclear Information System (INIS)

Mora, C.; Pimentel, L.O.

2003-01-01

In this work we present homogeneous and isotropic cosmological solutions for the low energy limit of string theory with a self interacting potential for the scalar field. For a potential that is a linear combination of two exponential, a family of exact solutions are found for the different spatial curvatures. Among this family a non singular accelerating solution for positive curvature is singled out and the violation of the energy conditions for that solution is studied, and also its astrophysical consequences. The string coupling for this solution is finite. (Author)

Cymbopogon citratus industrial waste as a potential source of bioactive compounds.

Science.gov (United States)

Tavares, Filipa; Costa, Gustavo; Francisco, Vera; Liberal, Joana; Figueirinha, Artur; Lopes, Maria Celeste; Cruz, Maria Teresa; Batista, Maria Teresa

2015-10-01

Cymbopogon citratus (Cc), commonly known as lemongrass, is a very important crop worldwide, being grown in tropical countries. It is widely used in the food, pharmaceutical, cosmetic and perfumery industries for its essential oil. Cc aqueous extracts are also used in traditional medicine. They contain high levels of polyphenols, which are known for their antioxidant and anti-inflammatory properties. Hydrodistillation of lemongrass essential oil produces an aqueous waste (CcHD) which is discarded. Therefore a comparative study between CcHD and Cc infusion (CcI) was performed to characterize its phytochemical profile and to research its antioxidant and anti-inflammatory potential. HPLC-PDA/ESI-MS(n) analysis showed that CcI and CcHD have similar phenolic profiles, with CcHD presenting a higher amount of polyphenols. Additionally, both CcI and CcHD showed antioxidant activity against DPPH (EC50 of 41.72 ± 0.05 and 42.29 ± 0.05 µg mL(-1) respectively) and strong anti-inflammatory properties, by reducing NO production and iNOS expression in macrophages and through their NO-scavenging activity, in a dose-dependent manner. Furthermore, no cytotoxicity was observed. The data of this study encourage considering the aqueous solution from Cc leaf hydrodistillation as a source of bioactive compounds, which may add great industrial value to this crop. © 2014 Society of Chemical Industry.

Analysis on Potential of Electric Energy Market based on Large Industrial Consumer

Science.gov (United States)

Lin, Jingyi; Zhu, Xinzhi; Yang, Shuo; Xia, Huaijian; Yang, Di; Li, Hao; Lin, Haiying

2018-01-01

The implementation of electric energy substitution by enterprises plays an important role in promoting the development of energy conservation and emission reduction in china. In order to explore alternative energy potential of industrial enterprises, to simulate and analyze the process of industrial enterprises, identify high energy consumption process and equipment, give priority to alternative energy technologies, and determine the enterprise electric energy substitution potential predictive value, this paper constructs the evaluation model of the influence factors of the electric energy substitution potential of industrial enterprises, and uses the combined weight method to determine the weight value of the evaluation factors to calculate the target value of the electric energy substitution potential. Taking the iron and steel industry as an example, this method is used to excavate the potential. The results show that the method can effectively tap the potential of the electric power industry

Energy potential in the food industry; Store energipotensialer i naeringsmiddelindustrien

Energy Technology Data Exchange (ETDEWEB)

Rosenberg, E; Risberg, T M; Mydske, H J; Helgerud, H E

2007-07-01

The food industry is one of the most power consuming industries (excluding the heavy industry) and has large potential for reducing the energy consumption. This report explains the most energy efficient measures and if the injunctions are followed

Improving Energy Efficiency in Industrial Solutions – Walk the Talk

DEFF Research Database (Denmark)

Wegener, Dieter; Finkbeiner, Matthias; Holst, Jens-Christian

2011-01-01

and finally communication of both environmental and economic performance of solutions to customers. One of the main tools supporting eco-design and evaluation & controlling of derived design solutions is the so called “Eco-Care-Matrix” (ECM). The ECM simply visualizes the eco-efficiency of solutions compared...... to a given baseline. In order to prevent from “green washing” criticism and to ensure “walk the talk” attitude the ECM should be scientifically well-founded using appropriate and consistent methodology. The vertical axis of an ECM illustrates the environmental performance and the horizontal axis describes...... ECM application is illustrated using the example of the Siemens MEROS® technology (Maximized Emission Reduction of Sintering) for the steel industry. MEROS® is currently the most modern and powerful system for cleaning off-gas in sinter plants. As an environmental technology MEROS® is binding...

Industrial environmental monitoring in non nuclear industry which potential to generate TENORM

International Nuclear Information System (INIS)

Veronica Tuka

2011-01-01

Constitution of the Republic of Indonesia Year 1945 states that the environment is good and healthy life is a human rights and constitutional rights of every citizen of Indonesia. In Indonesia has many industrial and mining activities that produce Norm (Naturally occurring Radioactive Materials) and TENORM (technologically Enhanced Naturally occurring Radioactive Materials). TENORM is a natural radioactive material which due to human activity or process technology increases the potential exposure when compared to the initial state and the potential radiological impact either external or internal radiation exposure. BAPETEN must ensure that the activities undertaken by non-nuclear industry, especially in the handling of radioactive waste at Norm and TENORM which can lead to chronic exposure, carried out securely and safely, both for workers, public and the environment. (author)

Estimates of the potential for energy conservation in the Chinese steel industry

International Nuclear Information System (INIS)

Lin Boqiang; Wu Ya; Zhang Li

2011-01-01

The study evaluates the energy saving potential of the Chinese steel industry by studying its potential future energy efficiency gap. In order to predict the future energy efficiency gap, a multivariate regression model combined with risk analysis is developed to estimate future energy intensity of China's steel industry. It is found that R and D intensity, energy saving investment, labor productivity and industry concentration are all important variables that affect energy intensity. We assess the possible measures as to how China's steel industry can narrow the energy efficiency gap with Japan by means of scenario analysis. Using Japan's current energy efficiency level as baseline, the energy saving potential of China's steel industry is more than 200 million ton coal equivalent in 2008, and it would fall to zero in 2020. However, if greater efforts were made to conserve energy, it would be possible to narrow down the energy efficiency gap between China and Japan by around 2015. Finally, using the results of the scenario analysis, future policy priorities for energy conservation in China's steel industry are assessed in this paper. - Highlights: → The energy saving potential of the Chinese steel industry is evaluated. → A multivariate regression model combined with risk analysis is developed. → R and D, energy saving investment, labor, and structure affect energy intensity.→ The energy saving potential of China's steel industry would fall to zero in 2020.→ Future policy for energy conservation in China's steel industry are assessed.

Harnessing the potential - Atlantic Canada's oil and gas industry : Newfoundland Ocean Industries special releases or publications

International Nuclear Information System (INIS)

1998-07-01

A comprehensive overview of Atlantic Canada's oil and gas industry is presented, demonstrating the importance of oil and gas resources and their related industries to Atlantic Canada. The objective of the report is to provide a basis for a strategy to optimize opportunities within the region from the oil and gas sector. The report reviews the current status of the industry, including the region's resource potential and the oil and gas developments currently underway. The evolution of the oil and gas industry is discussed in terms of value chain components. A broad assessment of the region's supply, labour force, infrastructure, training, and research and development capabilities is presented, followed by a description of the industry's potential, its regulatory framework and the barriers and constraints affecting industry development. Appendices contain a chronological history of major events in Atlantic Canada's oil and gas industry (Appendix A); and overview of the Atlantic Accord and the Canada-Nova Scotia Accord's equalization offset provisions (Appendix B); a value chain matrix, detailing some 60 categories of industry requirements and a capsule assessment of the region's ability to meet them (Appendix C); and a listing of research and development institutions in Atlantic Canada, including their areas of specialization (Appendix D)

Solution of Schroedinger equation for particle moving in two-well potential

International Nuclear Information System (INIS)

Ivanova, O.I.; Sabirov, R.Kh.

2000-01-01

The solution of the Schroedinger equation for the particle, moving in the two-well potential is given on the basis of a single variational method. This potential constitutes the sum of the harmonic potential and the Gaussian addition. The analytical expression for the wave function of the particle basic state is obtained. The dependence of the obtained solutions on the potential barrier height and width is studied. It is shown that the better separation of the potential barrier provides for higher accuracy of the calculations. The values of the two-well potential, whereby good agreement between the calculations and exact numerical solution of the Schroedinger equation may be expected, are presented [ru

Carbon reduction potentials of China's industrial parks: A case study of Suzhou Industry Park

International Nuclear Information System (INIS)

Wang, Hongsheng; Lei, Yue; Wang, Haikun; Liu, Miaomiao; Yang, Jie; Bi, Jun

2013-01-01

Industrial parks are the economic engines for many China regions, but they also consume a great deal of energy and emit greenhouse gases. However, few empirical studies have examined these special communities. We selected SIP (Suzhou Industrial Park) as a case study. Carbon emissions from SIP were accounted from the consumption perspective to analyze their characteristics. Results showed total carbon emissions grew 85.2% from 2005 to 2010, and carbon intensity (carbon emissions per unit of GDP (gross domestic product)) decreased by 9%. Scenario analysis was then used to depict emissions trajectories under three different pathways. The total carbon emissions and per capita carbon emissions for SIP will undoubtedly increase in the near future under a business-as-usual scenario, improved-policy scenario, and low-carbon scenario; the carbon intensity will decrease by 38% under low-carbon scenario, but it will still be difficult to reach the national mitigation target. In addition, geographic-boundary-based accounting methodology was applied for comparison analysis, carbon emissions show a large gap of 42.4–65.1% from 2005 to 2010, due to failure to account for cross-boundary emissions from imported electricity. Therefore, comprehensive analysis from a consumption perspective is necessary to provide a fair and comprehensive tool for China's local decision-makers to evaluate carbon mitigation potentials. - Highlights: ► Carbon reduction potentials of industrial parks, which are important communities in China, were analyzed. ► Comprehensive carbon emission inventories were developed for a China's industrial park. ► Policies were recommended for industrial parks to achieve low-carbon development target. ► Consumption-based emission inventory is necessary for local government to evaluate carbon reduction potentials

Industrial production and professional application of manufactured nanomaterials-enabled end products in Dutch industries: potential for exposure.

Science.gov (United States)

Bekker, Cindy; Brouwer, Derk H; Tielemans, Erik; Pronk, Anjoeka

2013-04-01

In order to make full use of the opportunities while responsibly managing the risks of working with manufactured nanomaterials (MNM), we need to gain insight into the potential level of exposure to MNM in the industry. Therefore, the goal of this study was to obtain an overview of the potential MNM exposure scenarios within relevant industrial sectors, applied exposure controls, and number of workers potentially exposed to MNM in Dutch industrial sectors producing and applying MNM-enabled end products in the Netherlands. A survey was conducted in three phases: (i) identification of MNM-enabled end products; (ii) identification of relevant industrial sectors; and (iii) a tiered telephone survey to estimate actual use of the products among 40 sector organizations/knowledge centres (Tier 1), 350 randomly selected companies (Tier 2), and 110 actively searched companies (Tier 3). The most dominant industrial sectors producing or applying MNM-enabled end products (market penetration >5%) are shoe repair shops, automotive, construction, paint, metal, and textile cleaning industry. In the majority of the companies (76%), potential risks related to working with MNM are not a specific point of interest. The total number of workers potentially exposed to MNM during the production or application of MNM-enabled end products was estimated at approximately 3000 workers in the Netherlands. The results of this study will serve as a basis for in-depth exposure and health surveys that are currently planned in the Netherlands. In addition, the results can be used to identify the most relevant sectors for policy makers and future studies focussing on evaluating the risks of occupational exposure to MNM.

Potential of waste heat in Croatian industrial sector

Directory of Open Access Journals (Sweden)

Bišćan Davor

2012-01-01

Full Text Available Waste heat recovery in Croatian industry is of the highest significance regarding the national efforts towards energy efficiency improvements and climate protection. By recuperation of heat which would otherwise be wasted, the quantity of fossil fuels used for production of useful energy could be lowered thereby reducing the fuel costs and increasing the competitiveness of examined Croatian industries. Another effect of increased energy efficiency of industrial processes and plants is reduction of greenhouse gases i.e. the second important national goal required by the European Union (EU and United Nations Framework Convention on Climate Change (UNFCCC. Paper investigates and analyses the waste heat potential in Croatian industrial sector. Firstly, relevant industrial sectors with significant amount of waste heat are determined. Furthermore, significant companies in these sectors are selected with respect to main process characteristics, operation mode and estimated waste heat potential. Data collection of waste heat parameters (temperature, mass flow and composition is conducted. Current technologies used for waste heat utilization from different waste heat sources are pointed out. Considered facilities are compared with regard to amount of flue gas heat. Mechanisms for more efficient and more economic utilization of waste heat are proposed. [Acknoledgment. The authors would like to acknowledge the financial support provided by the UNITY THROUGH KNOWLEDGE FUND (UKF of the Ministry of Science, Education and Sports of the Republic of Croatia and the World Bank, under the Grant Agreement No. 89/11.

Green function iterative solution of ground state wave function for Yukawa potential

International Nuclear Information System (INIS)

Zhang Zhao

2003-01-01

The newly developed single trajectory quadrature method is applied to solve central potentials. First, based on the series expansion method an exact analytic solution of the ground state for Hulthen potential and an approximate solution for Yukawa potential are obtained respectively. Second, the newly developed iterative method based on Green function defined by quadratures along the single trajectory is applied to solve Yukawa potential using the Coulomb solution and Hulthen solution as the trial functions respectively. The results show that a more proper choice of the trial function will give a better convergence. To further improve the convergence the iterative method is combined with the variational method to solve the ground state wave function for Yukawa potential, using variational solutions of the Coulomb and Hulthen potentials as the trial functions. The results give much better convergence. Finally, the obtained critical screen coefficient is applied to discuss the dissociate temperature of J/ψ in high temperature QGP

CO2 emissions and mitigation potential in China's ammonia industry

International Nuclear Information System (INIS)

Zhou Wenji; Zhu Bing; Li Qiang; Ma Tieju; Hu Shanying; Griffy-Brown, Charla

2010-01-01

Significant pressure from increasing CO 2 emissions and energy consumption in China's industrialization process has highlighted a need to understand and mitigate the sources of these emissions. Ammonia production, as one of the most important fundamental industries in China, represents those heavy industries that contribute largely to this sharp increasing trend. In the country with the largest population in the world, ammonia output has undergone fast growth spurred by increasing demand for fertilizer of food production since 1950s. However, various types of technologies implemented in the industry make ammonia plants in China operate with huge differences in both energy consumption and CO 2 emissions. With consideration of these unique features, this paper attempts to estimate the amount of CO 2 emission from China's ammonia production, and analyze the potential for carbon mitigation in the industry. Based on the estimation, related policy implications and measures required to realize the potential for mitigation are also discussed.

Chemical and petrochemical industry

Science.gov (United States)

Staszak, Katarzyna

2018-03-01

The potential sources of various metals in chemical and petrochemical processes are discussed. Special emphasis is put on the catalysts used in the industry. Their main applications, compositions, especially metal contents are presented both for fresh and spent ones. The focus is on the main types of metals used in catalysts: the platinum-group metals, the rare-earth elements, and the variety of transition metals. The analysis suggested that chemical and petrochemical sectors can be considered as the secondary source of metals. Because the utilization of spent refinery catalysts for metal recovery is potentially viable, different methods were applied. The conventional approaches used in metal reclamation as hydrometallurgy and pyrometallurgy, as well as new methods include bioleaching, were described. Some industrial solutions for metal recovery from spent solution were also presented.

Extracellular Metabolites from Industrial Microalgae and Their Biotechnological Potential

Directory of Open Access Journals (Sweden)

Lu Liu

2016-10-01

Full Text Available Industrial microalgae, as a big family of promising producers of renewable biomass feedstock, have been commercially exploited for functional food, living feed and feed additives, high-value chemicals in nutraceuticals, cosmeceuticals, and chemical reagents. Recently, microalgae have also been considered as a group that might play an important role in biofuel development and environmental protection. Almost all current products of industrial microalgae are derived from their biomass; however, large amounts of spent cell-free media are available from mass cultivation that is mostly unexploited. In this contribution we discuss that these media, which may contain a remarkable diversity of bioactive substances are worthy to be recovered for further use. Obviously, the extracellular metabolites from industrial microalgae have long been neglected in the development of production methods for valuable metabolites. With the advances in the last ten years, more and more structures and properties from extracellular metabolites have been identified, and the potential utilization over wide fields is attracting attention. Some of these extracellular metabolites can be potentially used as drugs, antioxidants, growth regulators or metal chelators. The purpose of this review is to provide an overview of the known extracellular metabolites from industrial microalgae which might be of commercial interest. The attention mainly focuses on the reports of extracellular bioactive metabolites and their potential application in biotechnology.

Soil Degradation in India: Challenges and Potential Solutions

Directory of Open Access Journals (Sweden)

Ranjan Bhattacharyya

2015-03-01

Full Text Available Soil degradation in India is estimated to be occurring on 147 million hectares (Mha of land, including 94 Mha from water erosion, 16 Mha from acidification, 14 Mha from flooding, 9 Mha from wind erosion, 6 Mha from salinity, and 7 Mha from a combination of factors. This is extremely serious because India supports 18% of the world’s human population and 15% of the world’s livestock population, but has only 2.4% of the world’s land area. Despite its low proportional land area, India ranks second worldwide in farm output. Agriculture, forestry, and fisheries account for 17% of the gross domestic product and employs about 50% of the total workforce of the country. Causes of soil degradation are both natural and human-induced. Natural causes include earthquakes, tsunamis, droughts, avalanches, landslides, volcanic eruptions, floods, tornadoes, and wildfires. Human-induced soil degradation results from land clearing and deforestation, inappropriate agricultural practices, improper management of industrial effluents and wastes, over-grazing, careless management of forests, surface mining, urban sprawl, and commercial/industrial development. Inappropriate agricultural practices include excessive tillage and use of heavy machinery, excessive and unbalanced use of inorganic fertilizers, poor irrigation and water management techniques, pesticide overuse, inadequate crop residue and/or organic carbon inputs, and poor crop cycle planning. Some underlying social causes of soil degradation in India are land shortage, decline in per capita land availability, economic pressure on land, land tenancy, poverty, and population increase. In this review of land degradation in India, we summarize (1 the main causes of soil degradation in different agro-climatic regions; (2 research results documenting both soil degradation and soil health improvement in various agricultural systems; and (3 potential solutions to improve soil health in different regions using a

Unintended Positional Drift and Its Potential Solutions

DEFF Research Database (Denmark)

Nilsson, Niels Christian; Serafin, Stefania; Nordahl, Rolf

2013-01-01

many users unintentionally move forward while walking in place. We refer to this phenomenon accidental movement as Unintended Positional Drift. The poster presents evidence of the phenomenon's existence and subsequently discusses different design solutions which potentially could circumvent the problem....

Big Data Analytics Solutions: The Implementation Challenges in the Financial Services Industry

Science.gov (United States)

Ojo, Michael O.

2016-01-01

The challenges of Big Data (BD) and Big Data Analytics (BDA) have attracted disproportionately less attention than the overwhelmingly espoused benefits and game-changing promises. While many studies have examined BD challenges across multiple industry verticals, very few have focused on the challenges of implementing BDA solutions. Fewer of these…

An induced current method for measuring zeta potential of electrolyte solution-air interface.

Science.gov (United States)

Song, Yongxin; Zhao, Kai; Wang, Junsheng; Wu, Xudong; Pan, Xinxiang; Sun, Yeqing; Li, Dongqing

2014-02-15

This paper reports a novel and very simple method for measuring the zeta potential of electrolyte solution-air interface. When a measuring electrode contacts the electrolyte solution-air interface, an electrical current will be generated due to the potential difference between the electrode-air surface and the electrolyte solution-air interface. The amplitude of the measured electric signal is linearly proportional to this potential difference; and depends only on the zeta potential at the electrolyte solution-air interface, regardless of the types and concentrations of the electrolyte. A correlation between the zeta potential and the measured voltage signal is obtained based on the experimental data. Using this equation, the zeta potential of any electrolyte solution-air interface can be evaluated quickly and easily by inserting an electrode through the electrolyte solution-air interface and measuring the electrical signal amplitude. This method was verified by comparing the obtained results of NaCl, MgCl2 and CaCl2 solutions of different pH values and concentrations with the zeta potential data reported in the published journal papers. Copyright © 2013 Elsevier Inc. All rights reserved.

Implementation of the HNS Convention in the LNG Industry: Singularities, Stakes, Issues and GIIGNL Proposed Solutions

International Nuclear Information System (INIS)

2008-01-01

The International Group of Liquefied Natural Gas Importers (GIIGNL) is a non-profit organization founded in December of 1971. It is composed of 56 member companies from 18 different countries across the world and involved in the importation of Liquefied Natural Gas. The main objective of the GIIGNL is to promote the development of activities related to LNG: purchasing, importing, processing, transportation, handling, re-gasification and various uses of LNG. For this purpose, the GIIGNL is particularly involved in promoting the state-of-the art technology in the LNG industry, in communicating about the economic fundamentals of the industry, in enhancing facility operations, in diversifying contractual techniques, and in developing industry positions to be taken in international agencies. As a member of the IOPC Fund since June 2007, the GIIGNL prepared this LNG overview in order to offer a better understanding to state delegations about this specific product and its market and to contribute to the debate on the implementation of the HNS Convention. the first chapter constitutes an introduction to the LNG Industry: presentation of an LNG Chain, overview of the global LNG trade and its growth rate, type of contracts, LNG tankers and technical transportation constraints, liquefaction and re-gasification plants around the world. The second chapter focuses on some singularities of the LNG industry that differentiate LNG from other Hazardous and Noxious Substances: LNG, a clean and unique product and activity, high standards and firm regulations concerning security and maritime safety, high level of investment required for an LNG chain, DES and FOB, the fundamental Incoterms of LNG sales and purchase. The third chapter presents the HNS Convention as potentially applicable to the LNG market: a two tier compensation regime - a new perspective for the LNG industry, a potential impact on LNG sales and purchase agreements, the importance of global HNS ratification within LNG

Corrosion problems and solutions in oil refining and petrochemical industry

CERN Document Server

Groysman, Alec

2017-01-01

This book addresses corrosion problems and their solutions at facilities in the oil refining and petrochemical industry, including cooling water and boiler feed water units. Further, it describes and analyzes corrosion control actions, corrosion monitoring, and corrosion management. Corrosion problems are a perennial issue in the oil refining and petrochemical industry, as they lead to a deterioration of the functional properties of metallic equipment and harm the environment – both of which need to be protected for the sake of current and future generations. Accordingly, this book examines and analyzes typical and atypical corrosion failure cases and their prevention at refineries and petrochemical facilities, including problems with: pipelines, tanks, furnaces, distillation columns, absorbers, heat exchangers, and pumps. In addition, it describes naphthenic acid corrosion, stress corrosion cracking, hydrogen damages, sulfidic corrosion, microbiologically induced corrosion, erosion-corrosion, and corrosion...

Steam systems in industry: Energy use and energy efficiency improvement potentials

International Nuclear Information System (INIS)

Einstein, Dan; Worrell, Ernst; Khrushch, Marta

2001-01-01

Steam systems are a part of almost every major industrial process today. Thirty-seven percent of the fossil fuel burned in US industry is burned to produce steam. In this paper we will establish baseline energy consumption for steam systems. Based on a detailed analysis of boiler energy use we estimate current energy use in boilers in U.S. industry at 6.1 Quads (6.4 EJ), emitting almost 66 MtC in CO(sub 2) emissions. We will discuss fuels used and boiler size distribution. We also describe potential savings measures, and estimate the economic energy savings potential in U.S. industry (i.e. having payback period of 3 years or less). We estimate the nationwide economic potential, based on the evaluation of 16 individual measures in steam generation and distribution. The analysis excludes the efficient use of steam and increased heat recovery. Based on the analysis we estimate the economic potential at 18-20% of total boiler energy use, resulting in energy savings approximately 1120-1190 TBtu ( 1180-1260 PJ). This results in a reduction of CO(sub 2) emissions equivalent to 12-13 MtC

The Analytic Solution of Schroedinger Equation with Potential Function Superposed by Six Terms with Positive-power and Inverse-power Potentials

International Nuclear Information System (INIS)

Hu Xianquan; Luo Guang; Cui Lipeng; Niu Lianbin; Li Fangyu

2009-01-01

The analytic solution of the radial Schroedinger equation is studied by using the tight coupling condition of several positive-power and inverse-power potential functions in this article. Furthermore, the precisely analytic solutions and the conditions that decide the existence of analytic solution have been searched when the potential of the radial Schroedinger equation is V(r) = α 1 r 8 + α 2 r 3 + α 3 r 2 + β 3 r -1 + β 2 r -3 + β 1 r -4 . Generally speaking, there is only an approximate solution, but not analytic solution for Schroedinger equation with several potentials' superposition. However, the conditions that decide the existence of analytic solution have been found and the analytic solution and its energy level structure are obtained for the Schroedinger equation with the potential which is motioned above in this paper. According to the single-value, finite and continuous standard of wave function in a quantum system, the authors firstly solve the asymptotic solution through the radial coordinate r → and r → 0; secondly, they make the asymptotic solutions combining with the series solutions nearby the neighborhood of irregular singularities; and then they compare the power series coefficients, deduce a series of analytic solutions of the stationary state wave function and corresponding energy level structure by tight coupling among the coefficients of potential functions for the radial Schroedinger equation; and lastly, they discuss the solutions and make conclusions. (general)

Exact quantum solutions for some asymmetrical two-well potentials

International Nuclear Information System (INIS)

Ley-Koo, E.

1985-01-01

We discuss several points of interest in the study of two-well potentials in quantum mechanics courses. In particular, we construct the solutions of the Schroedinger equation for rectangular-well, harmonic-oscillator and triangular-well potentials with a delta-function potential superimposed in different positions. The energy spectra and eigenfunctions of such systems are presented and analyzed for different intensities and positions of the delta-function potential. (author)

Updated Estimates of the Remaining Market Potential of the U.S. ESCO Industry

Energy Technology Data Exchange (ETDEWEB)

Larsen, Peter H. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.; Carvallo Bodelon, Juan Pablo [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.; Goldman, Charles A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.; Murphy, Sean [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.; Stuart, Elizabeth [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.

2017-04-01

The energy service company (ESCO) industry has a well-established track record of delivering energy and economic savings in the public and institutional buildings sector, primarily through the use of performance-based contracts. The ESCO industry often provides (or helps arrange) private sector financing to complete public infrastructure projects with little or no up-front cost to taxpayers. In 2014, total U.S. ESCO industry revenue was estimated at $5.3 billion. ESCOs expect total industry revenue to grow to $7.6 billion in 2017—a 13% annual growth rate from 2015-2017. Researchers at Lawrence Berkeley National Laboratory (LBNL) were asked by the U.S. Department of Energy Federal Energy Management Program (FEMP) to update and expand our estimates of the remaining market potential of the U.S. ESCO industry. We define remaining market potential as the aggregate amount of project investment by ESCOs that is technically possible based on the types of projects that ESCOS have historically implemented in the institutional, commercial, and industrial sectors using ESCO estimates of current market penetration in those sectors. In this analysis, we report U.S. ESCO industry remaining market potential under two scenarios: (1) a base case and (2) a case “unfettered” by market, bureaucratic, and regulatory barriers. We find that there is significant remaining market potential for the U.S. ESCO industry under both the base and unfettered cases. For the base case, we estimate a remaining market potential of $92-$201 billion ($2016). We estimate a remaining market potential of $190-$333 billion for the unfettered case. It is important to note, however, that there is considerable uncertainty surrounding the estimates for both the base and unfettered cases.

Adaptable and Reconfigurable LEAN Automation - a competitive solution in the western industry

DEFF Research Database (Denmark)

Bilberg, Arne; Hadar, Ronen

Companies have to be innovative in the trinity of product development, manufacturing systems, and business, however; the weak link in this trinity seems to be manufacturing systems. Researchers and industry have seen a contradiction between LEAN and automation. The hypothesis in this research...... is that the right combination of LEAN and Automation can be a very competitive solution that combines the flexibility of human operators with the high precision, productivity, and endurance of automation by e.g. robotics. The manufacturing equipment has to be adaptable and reconfigurable to new situations. The key...... words are simplification, effectiveness and user-friendliness at the shop floor. This concept is based on simple and adaptable hybrid solutions which the authors believe can be the right solution to also handle the increasing complexity .A new order management concept has been introduced, where skilled...

Analysis of the Potential Impacts on China’s Industrial Structure in Energy Consumption

Directory of Open Access Journals (Sweden)

Yushen Tian

2017-12-01

Full Text Available Industrial structure is one of the main factors that determine energy consumption. Based on China’s energy consumption in 2015 and the goals in 13th Five-Year Plan for Economic and Social Development of the People’s Republic of China (The 13th Five-Year Plan, this paper established an input–output fuzzy multi-objective optimization model to estimate the potential impacts of China’s industrial structure on energy consumption in 2015. Results showed that adjustments to industrial structure could save energy by 19% (1129.17 million ton standard coal equivalent (Mtce. Second, China’s equipment manufacturing industry has a large potential to save energy. Third, the development of several high energy intensive and high carbon intensive sectors needs to be strictly controlled, including Sector 25 (electricity, heat production, and supply industry, Sector 11 (manufacture of paper and stationery, printing, and Sector 14 (non-metallic mineral products industry. Fourth, the territory industry in China has a great potential for energy saving, while its internal structure still needs to be upgraded. Finally, we provide policy suggestions that may be adopted to reduce energy consumption by adjusting China’s industrial structure.

On the potential and economic feasibility of solar industrial process-heat applications in selected Turkish industries

International Nuclear Information System (INIS)

Ozdogan, S.; Arikol, M.

1992-01-01

We discuss the potential and economic feasibility of solar, industrial process-heat applications in the Turkish food, textile and chemical industries. The study covers 18 sites and end-use temperatures up to 120 and 150 o C. A solar system composed of parabolic troughs without thermal storage is chosen. The system size investigated is 500 to 20,000m 2 . (author)

Exact solution of nonrelativistic Schrodinger equation for certain central physical potential

International Nuclear Information System (INIS)

Bose, S.K.; Gupta, N.

1998-01-01

It is obtained here a class/classes of exact solution of the nonrelativistic Schrodinger equation for certain central potentials of physical interest by using proper ansatz/ansatze. The explicit expressions of energy eigenvalue and eigenfunction are obtained for each solution. These solutions are valid when for, in general, each solutions an interrelation between the parameters of the potential and the orbital-angular-momentum quantum number l is satisfied. These solutions, besides having an aesthetic appeal, can be used as benchmark to test the accuracy of nonperturbative methods, which sometimes yield wrong results, of solving the Schrodinger equation. The exact solution for the following central potentials, which are relevant in different areas of physics, have been obtained: 1) V(r)=ar 6 + br 4 + cr 2 ; 2) V(r)=ar 2 + br + c/r; 3) V(r)=r 2 + λr 2 /(1+gr 2 ); 4) V(r)= a/r + b/(r+λ); 5a) V(r)=a/r + b/r 2 +c/r 3 +d/r 4 ; 5)b V(r)=a/r 2 + b/r 2 + c/r 4 + d/r 6 ; 6a) V(r)=a/r 1/2 + b/r 3/2 ; 6b) V(r)=ar 2/3 + br -2/3 + cr -4/3

Energy conservation potential in China’s petroleum refining industry: Evidence and policy implications

International Nuclear Information System (INIS)

Lin, Boqiang; Xie, Xuan

2015-01-01

Highlights: • A long-term equilibrium relationship of energy demand in China’s petroleum refining industry is established. • The sectoral energy conservation potential is evaluated by using scenarios analysis. • Energy prices, enterprise scale, R and D investment and ownership structure affect electricity intensity. • Future policy for energy conservation in China’s petroleum refining industry is suggested. - Abstract: China is currently the second largest petroleum refining country in the world due to rapid growth in recent years. Because the petroleum refining industry is energy-intensive, the rapid growth in petroleum refining and development caused massive energy consumption. China’s urbanization process will guarantee sustained growth of the industry for a long time. Therefore, it is necessary to study the energy conservation potential of the petroleum industry. This paper estimates the energy conservation potential of the industry by applying a cointegration model to investigate the long-run equilibrium relationship between energy consumption and some factors such as energy price, enterprise scale, R and D investment and ownership structure. The results show that R and D investment has the greatest reduction impact on energy intensity, and the growth of market participants (i.e. the decline of the share of state-owned companies) can improve energy efficiency of this industry. Under the advanced energy-saving scenario, the accumulated energy conservation potential will reach 230.18 million tons of coal equivalent (tce). Finally, we provide some targeted policy recommendations for industrial energy conservation

Is innovative workforce planning software the solution to NHS staffing and cost crisis? An exploration of the locum industry.

Science.gov (United States)

Theodoulou, Iakovos; Reddy, Akshaya Mohan; Wong, Jeremy

2018-03-20

Workforce planning in the British healthcare system (NHS) is associated with significant costs of agency staff employment. The introduction of a novel software (ABG) as a 'people to people economy' (P2PE) platform for temporary staff recruitment offers a potential solution to this problem. Consequently, the focus of this study was twofold - primarily to explore the locum doctor landscape, and secondarily to evaluate the implementation of P2PE in the healthcare industry. Documentary analysis was conducted alongside thirteen semi structured interviews across five informant groups: two industry experts, two healthcare consultants, an executive director, two speciality managers and six doctors. We found that locum doctors are indispensable to covering workforce shortages, yet existing planning and recruitment practices were found to be inefficient, inconsistent and lacking transparency. Contrarily, mobile-first solutions such as ABG seem to secure higher convenience, better transparency, cost and time efficiency. We also identified factors facilitating the successful diffusion of ABG; these were in line with classically cited characteristics of innovation such as trialability, observability, and scope for local reinvention. Drawing upon the concept of value-based healthcare coupled with the analysis of our findings led to the development of Information Exchange System (IES) model, a comprehensive framework allowing a thorough comparison of recruitment practices in healthcare. IES was used to evaluate ABG and its diffusion against other recruitment methods and ABG was found to outperform its alternatives, thus suggesting its potential to solve the staffing and cost crisis at the chosen hospital.

VLT instruments: industrial solutions for non-scientific detector systems

Science.gov (United States)

Duhoux, P.; Knudstrup, J.; Lilley, P.; Di Marcantonio, P.; Cirami, R.; Mannetta, M.

2014-07-01

Recent improvements in industrial vision technology and products together with the increasing need for high performance, cost efficient technical detectors for astronomical instrumentation have led ESO with the contribution of INAF to evaluate this trend and elaborate ad-hoc solutions which are interoperable and compatible with the evolution of VLT standards. The ESPRESSO spectrograph shall be the first instrument deploying this technology. ESO's Technical CCD (hereafter TCCD) requirements are extensive and demanding. A lightweight, low maintenance, rugged and high performance TCCD camera product or family of products is required which can operate in the extreme environmental conditions present at ESO's observatories with minimum maintenance and minimal downtime. In addition the camera solution needs to be interchangeable between different technical roles e.g. slit viewing, pupil and field stabilization, with excellent performance characteristics under a wide range of observing conditions together with ease of use for the end user. Interoperability is enhanced by conformance to recognized electrical, mechanical and software standards. Technical requirements and evaluation criteria for the TCCD solution are discussed in more detail. A software architecture has been adopted which facilitates easy integration with TCCD's from different vendors. The communication with the devices is implemented by means of dedicated adapters allowing usage of the same core framework (business logic). The preference has been given to cameras with an Ethernet interface, using standard TCP/IP based communication. While the preferred protocol is the industrial standard GigE Vision, not all vendors supply cameras with this interface, hence proprietary socket-based protocols are also acceptable with the provision of a validated Linux compliant API. A fundamental requirement of the TCCD software is that it shall allow for a seamless integration with the existing VLT software framework

Industry 4.0 implies lean manufacturing: Research activities in industry 4.0 function as enablers for lean manufacturing

Directory of Open Access Journals (Sweden)

Adam Sanders

2016-09-01

Full Text Available Purpose: Lean Manufacturing is widely regarded as a potential methodology to improve productivity and decrease costs in manufacturing organisations. The success of lean manufacturing demands consistent and conscious efforts from the organisation, and has to overcome several hindrances. Industry 4.0 makes a factory smart by applying advanced information and communication systems and future-oriented technologies. This paper analyses the incompletely perceived link between Industry 4.0 and lean manufacturing, and investigates whether Industry 4.0 is capable of implementing lean. Executing Industry 4.0 is a cost-intensive operation, and is met with reluctance from several manufacturers. This research also provides an important insight into manufacturers’ dilemma as to whether they can commit into Industry 4.0, considering the investment required and unperceived benefits. Design/methodology/approach: Lean manufacturing is first defined and different dimensions of lean are presented. Then Industry 4.0 is defined followed by representing its current status in Germany. The barriers for implementation of lean are analysed from the perspective of integration of resources. Literatures associated with Industry 4.0 are studied and suitable solution principles are identified to solve the abovementioned barriers of implementing lean. Findings: It is identified that researches and publications in the field of Industry 4.0 held answers to overcome the barriers of implementation of lean manufacturing. These potential solution principles prove the hypothesis that Industry 4.0 is indeed capable of implementing lean. It uncovers the fact that committing into Industry 4.0 makes a factory lean besides being smart. Originality/value: Individual researches have been done in various technologies allied with Industry 4.0, but the potential to execute lean manufacturing was not completely perceived. This paper bridges the gap between these two realms, and identifies

Exact quantum solution for some symmetrical two-well potentials

International Nuclear Information System (INIS)

Ley-Koo, E.

1985-01-01

We construct the solutions of the Schroedinger equation for the rectangular-well, harmonic-oscillator and symmetric-linear potentials with a delta-function potential superimposed in their central positions. The odd-parity states are not affected by the presence of the delta-function potential. The even-parity states are determined by the condition that their wave functions have in the central position a fixed logarithmic derivative, which is proportional to the intensity the delta-function potential. (author)

Perturbed Coulomb Potentials in the Klein-Gordon Equation: Quasi-Exact Solution

Science.gov (United States)

Baradaran, M.; Panahi, H.

2018-05-01

Using the Lie algebraic approach, we present the quasi-exact solutions of the relativistic Klein-Gordon equation for perturbed Coulomb potentials namely the Cornell potential, the Kratzer potential and the Killingbeck potential. We calculate the general exact expressions for the energies, corresponding wave functions and the allowed values of the parameters of the potential within the representation space of sl(2) Lie algebra. In addition, we show that the considered equations can be transformed into the Heun's differential equations and then we reproduce the results using the associated special functions. Also, we study the special case of the Coulomb potential and show that in the non-relativistic limit, the solution of the Klein-Gordon equation converges to that of Schrödinger equation.

Chemistry in high temperature aqueous solutions application to the power industry

International Nuclear Information System (INIS)

Cohen, P.

1990-01-01

The power industry utilizes water (aqueous solutions) for two main functions: as a medium for heat transfer and transport and as a thermodynamic working fluid. These functions are performed in systems fabricated from a wide variety of materials, over a wide range of thermal and hydraulic conditions, and at medium temperatures and densities which determine the significant chemical properties. The major chemical interest is in the concentrated solutions derived from the dilute working fluid at selected sites defined by the physical arrangement and temperature and in their consequential effects on heat transfer and corrosion. Examples of these sites for typical fossil fired and nuclear steam generating equipment are described, as well as the extent and limit of the concentration process. The history of steam power plant water chemistry is discussed from the point of view of the chemical processes involved. The period covered is from the 1920s to the present state of the art, which is a major application of the subject of this symposium--chemistry in high temperature aqueous solution

Potential adsorption of methylene blue from aqueous solution using green macroalgaePosidonia oceanica.

Science.gov (United States)

Allouche, F.-N.; Yassaa, N.

2018-03-01

The use of inexpensive biological materials, such as marine algae for removing dyes from contaminated industrial effluents appears as a potential alternative method. The aim of this study is to investigate the aptitude of marine macroalgae Posidonia Oceanica local biomass abundant on the coasts of Algeria for selective sorption of methylene blue (MB) from an aqueous solution in batch experiments at 20 °C. A maximum percentage removal of Posidonia oceanica occurs at pH 5. Equilibrium isotherm data were analyzed using the Langmuir and the Freundlich isotherms. The adsorption equilibrium of methylene blue was best describe by Langmuir model than the Freundlich model. The maximum sorption capacity was 357 mgg-1at pH 5. The sorption data were very well described by the pseudo-second-order model. Keywords: Posidonia oceanica, Methylene blue (MB), Biosorption, Isotherm Equilibrium, Kinetics; Modelling.

OCT for industrial applications

Science.gov (United States)

Song, Guiju; Harding, Kevin

2012-11-01

Optical coherence tomography (OCT), as an interferometric method, has been studied as a distance ranger. As a technology capable of producing high-resolution, depth-resolved images of biological tissue, OCT had been widely used for the application of ophthalmology and has been commercialized in the market today. Enlightened by the emerging research interest in biomedical domain, the applications of OCT in industrial inspection were rejuvenated by a few groups to explore its potential for characterizing new materials, imaging or inspecting industrial parts as a service solution[3]. Benefiting from novel photonics components and devices, the industrial application of the older concepts in OCT can be re-visited with respect to the unique performance and availability. Commercial OCT developers such as Michelson Diagnostics (MDL; Orpington, U.K.) and Thorlabs (Newton, NJ) are actively exploring the application of OCT to industrial applications and they have outlined meaningful path toward the metrology application in emerging industry[3]. In this chapter, we will introduce the fundamental concepts of OCT and discuss its current and potential industrial applications.

The Potential of Thermophotovoltaic Heat Recovery for the Glass Industry

Science.gov (United States)

Bauer, T.; Forbes, I.; Penlington, R.; Pearsall, N.

2003-01-01

This paper aims to provide an overview of heat recovery by thermophotovoltaics (TPV) from industrial high-temperature processes and uses the glass industry in the UK as an example. The work is part of a study of potential industrial applications of TPV in the UK being carried out by the Northumbria Photovoltaics Applications Centre. The paper reviews the relevant facts about TPV technology and the glass industry and identifies locations of use for TPV. These are assessed in terms of glass sector, furnace type, process temperature, impact on the existing process, power scale and development effort of TPV. Knowledge of these factors should contribute to the design of an optimum TPV system. The paper estimates possible energy savings and reductions of CO2 emissions using TPV in the glass industry.

Path integral solution for some time-dependent potential

International Nuclear Information System (INIS)

Storchak, S.N.

1989-12-01

The quantum-mechanical problem with a time-dependent potential is solved by the path integral method. The solution is obtained by the application of the previously derived general formula for rheonomic homogeneous point transformation and reparametrization in the path integral. (author). 4 refs

Categorization of potential project cost overrun factors in construction industry

Science.gov (United States)

Karunakaran, P.; Abdullah, A. H.; Nagapan, S.; Sohu, S.; Kasvar, K. K.

2018-04-01

Cost overrun has been severely hit down the economy and reputations for many construction industry around the world. Many project management tools developed to control the budget of a project. However, the cost management is still considered poor as there are many cost overrun issues occurred in the construction industry. Thus, this paper aims to identify and cluster the potential construction project cost overrun factors according to their originating groups using the thematic approach. Basically, through literature review, all the potential factors that may cause cost overrun were screened thoroughly before they were clustered into seven (7) groups of the originating factors, namely project, contract, client, contractor, consultant, labour and external. Each potential factor was explained clearly with some examples based on the Malaysian case studies to illustrate the cost overrun scenario. These findings may aid in the future to highlight on how to mitigate the critical potential factors of cost overrun to reduce or overcome its impact on all the stakeholders involved.

Comprehensive approach to energy and environment in the Eco Care Program for design, engineering and operation of Siemens Industry Solutions

Energy Technology Data Exchange (ETDEWEB)

Wegener, D. (Siemens AG, Erlangen (Germany)); Finkbeiner, M. (Technische Univ. Berlin (TUB), Systemumwelttechnik (SUT), Berlin (Germany)); Geiger, D. (Siemens AG, Munich (Germany)); Olsen, S.I. (Danish Technical Univ. (DTU), Management Engineering, Lyngby (Denmark)); Walachowicz, F. (Siemens AG, Berlin (Germany))

2009-09-15

This paper intends to describe the outline of the Eco Care Program (ECP) at the Siemens-Division Industry Solutions and its implementation. ECP aims to embrace and to coordinate main activities within the product lifecycle management (PLM) process considering both economic targets in terms of overall lifecycle costs as well as energy efficiency and other important environmental issues in the innovation management for industrial solutions. ECP consists of adapted methods for assessing the environmental and financial impacts of industrial solutions (plants, processes, single technologies or even services) and tools which helps to derive reliable assessment results. Life Cycle Assessment (LCA) is a suitable method for assessing environmental impacts of products and solutions over their entire lifecycle focusing on those lifecycle phases which may contribute significantly to environmental burdens or benefits. To meet these requirements the main challenge is to simplify the assessment methodology as far as reliability and accuracy of results is preserved. To present results in both dimensions of economical performance and environmental impact the paper introduces the concept of the 'eco care matrix' (ECM). Environmental sound industrial solutions have advantages in both 'eco' dimensions (eco-nomical + eco-logical). The analytical approach presented is further on implemented in two complementary and independent industrial application fields: in order to exemplify usability of the approach in quite complex process technology different hot metal producing technologies (blast furnace route vs. smelting reduction routes COREX / FINEX). The second pilot application is targeted on the assessment of infrastructure solutions especially focusing on the comparison of environmental and financial effects of different technologies and payment schemes of electronic city tolling systems for London and Copenhagen. Experienced results derived from these two pilot

Existence of lattice solutions to semilinear elliptic systems with periodic potential

Directory of Open Access Journals (Sweden)

Nicholas D. Alikakos

2012-01-01

Full Text Available Under the assumption that the potential W is invariant under a general discrete reflection group $G'=TG$ acting on $mathbb{R}^n$, we establish existence of G'-equivariant solutions to $Delta u - W_u(u = 0$, and find an estimate. By taking the size of the cell of the lattice in space domain to infinity, we obtain that these solutions converge to G-equivariant solutions connecting the minima of the potential W along certain directions at infinity. When particularized to the nonlinear harmonic oscillator $u''+alpha sin u=0$, $alpha>0$, the solutions correspond to those in the phase plane above and below the heteroclinic connections, while the G-equivariant solutions captured in the limit correspond to the heteroclinic connections themselves. Our main tool is the G'-positivity of the parabolic semigroup associated with the elliptic system which requires only the hypothesis of symmetry for W. The constructed solutions are positive in the sense that as maps from $mathbb{R}^n$ into itself leave the closure of the fundamental alcove (region invariant.

Identifying Key Issues and Potential Solutions for Integrated Arrival, Departure, Surface Operations by Surveying Stakeholder Preferences

Science.gov (United States)

Aponso, Bimal; Coppenbarger, Richard A.; Jung, Yoon; Quon, Leighton; Lohr, Gary; O’Connor, Neil; Engelland, Shawn

2015-01-01

NASA's Aeronautics Research Mission Directorate (ARMD) collaborates with the FAA and industry to provide concepts and technologies that enhance the transition to the next-generation air-traffic management system (NextGen). To facilitate this collaboration, ARMD has a series of Airspace Technology Demonstration (ATD) sub-projects that develop, demonstrate, and transitions NASA technologies and concepts for implementation in the National Airspace System (NAS). The second of these sub-projects, ATD-2, is focused on the potential benefits to NAS stakeholders of integrated arrival, departure, surface (IADS) operations. To determine the project objectives and assess the benefits of a potential solution, NASA surveyed NAS stakeholders to understand the existing issues in arrival, departure, and surface operations, and the perceived benefits of better integrating these operations. NASA surveyed a broad cross-section of stakeholders representing the airlines, airports, air-navigation service providers, and industry providers of NAS tools. The survey indicated that improving the predictability of flight times (schedules) could improve efficiency in arrival, departure, and surface operations. Stakeholders also mentioned the need for better strategic and tactical information on traffic constraints as well as better information sharing and a coupled collaborative planning process that allows stakeholders to coordinate IADS operations. To assess the impact of a potential solution, NASA sketched an initial departure scheduling concept and assessed its viability by surveying a select group of stakeholders for a second time. The objective of the departure scheduler was to enable flights to move continuously from gate to cruise with minimal interruption in a busy metroplex airspace environment using strategic and tactical scheduling enhanced by collaborative planning between airlines and service providers. The stakeholders agreed that this departure concept could improve schedule

Economical solution for the industrial waste problem of Karachi industrial area

International Nuclear Information System (INIS)

Mubin, S.

2005-01-01

The increased rate of industrialization coupled with rapid urbanization in Pakistan has given rise to serious water pollution and environmental problems. A vast range of industries has been established in the country during the last twenty five years, including tanneries, fertilizers, textiles, refineries, chemicals, vegetable oils, paper am pulp, sugar and food. Little attention was paid towards a large scale release of wastewater from these industries. Presently wastewater produced from these industries has been considered a serious problem and research in being conducted to solve its associated problems. Recently, it has been realized that there is a significant threat of water borne diseases, degradation of fresh water quality, environmental depletion and soil deterioration from the effluent and toxic emission of industries. Being a developing country and having limited resources, it is hard to install treatment plants on the industrial effluent with every industry before discharging them into streams which are also creating disturbance in natural ecosystem. An effort has been made to solve wastewater problem by implementing statistical tools on data of Karachi industrial state, obtained from EPA JICA and PCRWR, Islamabad. (author)

Exact solutions of continuous states for Hartmann potential

International Nuclear Information System (INIS)

Chen Changyuan; Lu Falin; Sun Dongsheng

2004-01-01

In this Letter, we obtain the exact solutions of continuous states for the Hartmann potential. The normalized wave functions of continuous states on the 'k/2π scale' and the calculation formula of phase shifts are presented. Analytical properties of the scattering amplitude are discussed

Technical overview of cogeneration: the hardware, the industries, the potential development

Energy Technology Data Exchange (ETDEWEB)

None

1977-12-01

Because the by-product heat from a power-conversion process is captured for productive use in a cogeneration system, instead of exhausted to the environment as it is in a conventional power plant, cogeneration represents an important energy-conservation technique. By cogenerating, an industrial plant can save the fuel that would have been needed to produce the amount of heat captured. Recognizing the significant energy-savings potential offered by cogeneration, DOE has undertaken a major R, D, and D program to investigate and promote cogeneration in industry. Resource Planning Associates, Inc. (RPA), has been working to accomplish four of the program's objectives: (1) survey current, near state-of-the-art, and future cogeneration equipment, and identify any gaps or deficiencies; (2) characterize the energy requirements of the manufacturing sectors of five of the country's most energy-intensive industries - chemical, petroleum refining, paper and pulp, textiles, and food; (3) identify principal targets for, and barriers to, the increased market development of cogeneration systems; and (4) estimate the potential maximum and the probable energy savings that could be achieved in the five selected industries through cogeneration. In investigating cogeneration hardware, three specific technologies - steam turbines, gas turbines, and diesel engines - were emphasized. It is estimated that the widespread application of cogeneration technology in the five industries studied could result in a maximum potential savings of 2.4 million barrels of oil equivalent per day (or a maximum incremental capacity of 140,000 MWe) by 1985.

Methodological guide: management of industrial sites potentially contaminated by radioactive substances

International Nuclear Information System (INIS)

2001-01-01

At the request of the Ministries of Health and the Environment, IPSN is preparing and publishing the first version of the methodological guide devoted to managing industrial sites potentially contaminated by radioactive substances. This guide describes a procedure for defining and choosing strategies for rehabilitating such industrial sites. (author)

Potentials and challenges of biogas from fish industry waste in the Arctic

DEFF Research Database (Denmark)

Jensen, Pernille Erland; Heiske, Stefan

2016-01-01

The fish industry is a main industry in many Arctic locations. In most places by-products are disposed of at sea. Oxygen depletion and dead sea bottom is observed, as the organic material is biodegraded and methane produced; contributing to the global warming. In this study, the biogas potential...... of indicator microorganisms was investigated. All residues had biogas potentials similar to or higher than conventional feedstocks like manure and silage. Waste water sludge and brown algae had potentials comparable to manure. The combined shrimp and algae digestion showed indication of synergistic effects...

Project to demonstrate potential energy savings from industrial customers. Final report

Energy Technology Data Exchange (ETDEWEB)

None

1978-06-01

The full potential for electric load management was determined with respect to the industrial sector by adopting direct load management techniques. Certain options available to regulatory authorities and individual utilities to conserve energy are highlighted. By conducting a demonstration project on a representative sample of primary industrial customers, information could be obtained on the potential impact of direct load management methods and other end-use conservation programs on a system-wide basis or multi-system-wide basis. The study was conducted by the Michigan Public Service Commission in cooperation with the Detroit Edison Company.

Solution to reinforcement learning problems with artificial potential field

Institute of Scientific and Technical Information of China (English)

XIE Li-juan; XIE Guang-rong; CHEN Huan-wen; LI Xiao-li

2008-01-01

A novel method was designed to solve reinforcement learning problems with artificial potential field. Firstly a reinforcement learning problem was transferred to a path planning problem by using artificial potential field(APF), which was a very appropriate method to model a reinforcement learning problem. Secondly, a new APF algorithm was proposed to overcome the local minimum problem in the potential field methods with a virtual water-flow concept. The performance of this new method was tested by a gridworld problem named as key and door maze. The experimental results show that within 45 trials, good and deterministic policies are found in almost all simulations. In comparison with WIERING's HQ-learning system which needs 20 000 trials for stable solution, the proposed new method can obtain optimal and stable policy far more quickly than HQ-learning. Therefore, the new method is simple and effective to give an optimal solution to the reinforcement learning problem.

Researching the Components of Formation of the Export Potential of Industry on the Micro-and Meso-Levels

Directory of Open Access Journals (Sweden)

Pavlenchyk Nataliya F.

2017-11-01

Full Text Available The article analyses approaches to formation of the export potential of industry on the micro- and meso-levels. A number of factors influencing the formation of the export potential of industry on the micro- and meso-levels has been considered. It was found that the components of the export potential of industry on the micro- and meso-levels are factors, capabilities (potential, and resources. It has been suggested to perceive the defining resources of formation of the export potential of industrial enterprises as: personnel, production, financial-investment, innovation, marketing, information, organizational, and managerial. It has been found that the main resources of export potential of the industry of region include: production, raw material, natural, financial, investment, social, and innovation. There is a number of opportunities that contribute to the formation of the export potential of the region’s industry, in particular: labor, industrial, financial, raw material, natural, investment, innovation, social, information, and organizational-managerial.

Influence of Solvent-Solvent and Solute-Solvent Interaction Properties on Solvent-Mediated Potential

International Nuclear Information System (INIS)

Zhou Shiqi

2005-01-01

A recently proposed universal calculational recipe for solvent-mediated potential is applied to calculate excess potential of mean force between two large Lennard-Jones (LJ) or hard core attractive Yukawa particles immersed in small LJ solvent bath at supercritical state. Comparison between the present prediction with a hypernetted chain approximation adopted for solute-solute correlation at infinitely dilute limit and existing simulation data shows high accuracy for the region with large separation, and qualitative reliability for the solute particle contact region. The calculational simplicity of the present recipe allows for a detailed investigation on the effect of the solute-solvent and solvent-solvent interaction details on the excess potential of mean force. The resultant conclusion is that gathering of solvent particles near a solute particle leads to repulsive excess PMF, while depletion of solvent particles away from the solute particle leads to attractive excess PMF, and minor change of the solvent-solvent interaction range has large influence on the excess PMF.

Marketing potential of industrial companies of Ukraine

Directory of Open Access Journals (Sweden)

O.V. Oliynyk

2016-03-01

Full Text Available The article determines the essence of the marketing potential of the company as a part of improving the efficiency of the company’s activity forming a united mechanism along with industrial and financial subsystems. The components of the total potential of the company, the factors forming structure of the marketing potential of the company and the approaches to the evaluation of such a potential of the company are considered. It is determined that the marketing potential of the company integrates all the marketing resources, reserves and the possibility of their use, and the functioning as well as development of the system are subjected to the achievement of the main company’s goals. The differences in the interpretation of economic, market and marketing potential of the company are identified, although they are related to the subject of entrepreneurship, but they differ in their essence. The substantiation of the essence of marketing potential of the company, the development of an effective mechanism of its management with the possibility of evaluation will contribute to the maximum satisfaction of interests of information consumers’ groups, the formation of strategic directions of the activity, making management decisions at the micro level, the effective functioning in the internal and external markets.

CO2 emissions and reduction potential in China's chemical industry

International Nuclear Information System (INIS)

Zhu, Bing; Zhou, Wenji; Hu, Shanying; Li, Qiang; Griffy-Brown, Charla; Jin, Yong

2010-01-01

GHG (Increasing greenhouse gas) emissions in China imposes enormous pressure on China's government and society. The increasing GHG trend is primarily driven by the fast expansion of high energy-intensive sectors including the chemical industry. This study investigates energy consumption and CO 2 emissions in the processes of chemical production in China through calculating the amounts of CO 2 emissions and estimating the reduction potential in the near future. The research is based on a two-level perspective which treats the entire industry as Level one and six key sub-sectors as Level two, including coal-based ammonia, calcium carbide, caustic soda, coal-based methanol, sodium carbonate, and yellow phosphorus. These two levels are used in order to address the complexity caused by the fact that there are more than 40 thousand chemical products in this industry and the performance levels of the technologies employed are extremely uneven. Three scenarios with different technological improvements are defined to estimate the emissions of the six sub-sectors and analyze the implied reduction potential in the near future. The results highlight the pivotal role that regulation and policy administration could play in controlling the CO 2 emissions by promoting average technology performances in this industry.

Efficiency potential of management and technical solutions for a construction object

Directory of Open Access Journals (Sweden)

Lapidus Azariy Abramovich

2014-01-01

Full Text Available The authors investigate the models of efficiency potential of management and technical solutions for a construction object, which allows accounting for the influence of management-technological and administrative solutions in the process of implementing construction project. The solutions are represented by various factors – solitary integral potentials. The factors, which should be taken into account in the process of developing an integral model, are: development of general contracting structure, project decisions, management decisions, administrative decisions and ecological impact. In is necessary to develop the model, which will integrally put together the above mentioned factors of a construction project, observe and investigate other factors, create a model and get the opportunity not only to predict the endpoint of the future construction object on the stage of formulating technological requirements, but also to monitor the changes of this prognosis in time. The parameters of the integral potential will allow the system to obtain flexibility, which makes it possible to adjust to the changes usually taking place on a construction object and at the same time to aim for optimization of organizational, technological and administrative solutions in the process of reaching endpoint of construction.

Telecommunication industry in Thailand as potential market for Abloy Oy

OpenAIRE

Hoffrén, Jenna

2015-01-01

The commission company made a decision to proceed with a market research about telecommunication industry in Thailand as a potential market. The telecommunication industry is fast growing and demanding market around the world. In several Asian countries, such as in Malaysia and Singapore, government has regulated that data protection on private and public data must be secured by telecommunication providers. There are many reasons which can cost major issues and damage for connections and for ...

Achieving Excellence through Memorable Traveler Experience and Challenges,Opportunities and Solutions for Romanian Travel and Hospitality Industry

Directory of Open Access Journals (Sweden)

THEODOR VALENTIN PURCAREA

2010-06-01

Full Text Available Hospitality industry is probably the fastest growing one in the world. The tourism company should endeavour to shape the overall perception of value in this industry. What matters is the provision of experiences, but not services. To meet international standards the Romanian tourism should consider challenges, opportunities and solutions to cope with the specific requirements in this field.

Potential of dyes as draw solutions in forward osmosis for the south african textile industry

DEFF Research Database (Denmark)

Sheldon, Marshall; Jingxi, Estella Zandile; De Jager, Debbie

2018-01-01

The textile industry produces large volumes of wastewater that requires appropriate treatment before being released into the environment. Research globally has focused on advanced desalination technologies to augment the limited freshwater resources. Forward osmosis (FO) technology has gained...

The impact of climate change on the global wine industry: Challenges & solutions

Directory of Open Access Journals (Sweden)

Michelle Renée Mozell

2014-12-01

Full Text Available This paper explores the impact of climate change upon the global production of winegrapes and wine. It includes a review of the literature on the cause and effects of climate change, as well as illustrations of the specific challenges global warming may bring to the production of winegrapes and wine. More importantly, this paper provides some practical solutions that industry professionals can take to mitigate and adapt to the coming change in both vineyards and wineries.

Potential reduced exposure products (PREPs) in industry trial testimony.

Science.gov (United States)

Wayne, Geoffrey Ferris

2006-12-01

To identify patterns in trial testimony that may reflect on the intentions or expectations of tobacco manufacturers with regard to the introduction of potential reduced exposure products (PREPs). Research was conducted using the Deposition and Trial Testimony Archive (DATTA) collection of trial testimony and depositions housed online at Tobacco Documents Online (www.tobaccodocuments.org). Relevant testimony was identified through full-text searches of terms indicating PREPs or harm reduction strategies. The role and function of PREPs in testimony were classified according to common and contrasting themes. These were analysed in the context of broader trial arguments and against changes in time period and the market. Analysis of testimony suggests that the failure of PREPs in the market tempered initial industry enthusiasm and made protection of the conventional cigarette market its major priority. The "breakthrough" character of PREPs has been de-emphasised, with trial arguments instead positioning PREPs as simply another choice for consumers. This framework legitimises the sale of conventional brands, and shifts the responsibility for adoption of safer products from the manufacturer to the consumer. Likewise, testimony has abandoned earlier dramatic health claims made with regard to PREPs, which had undermined industry arguments regarding efforts to reduce harm in conventional products. More recent testimony advocates the broad acceptance of independent guidelines that would validate use of health claims and enable the industry to market PREPs to consumers. Trial testimony reflects the changing role and positioning of PREPs by the tobacco industry. The findings are of particular importance with regard to future evaluation and potential regulation of reduced harm products.

Potential hazards and risks associated with the aquaculture industry ...

African Journals Online (AJOL)

Aquaculture, the farming of aquatic organisms, is fraught with potential hazards and risks which are categorized into occupational, environmental, food safety and public health. This paper reviewed major hazards and risks associated with the aquaculture industry and proffered strategies for their management and control.

Simplification of Process Integration Studies in Intermediate Size Industries

DEFF Research Database (Denmark)

Dalsgård, Henrik; Petersen, P. M.; Qvale, Einar Bjørn

2002-01-01

associated with a given process integration study in an intermediate size industry. This is based on the observation that the systems that eventually result from a process integration project and that are economically and operationally most interesting are also quite simple. Four steps that may be used......It can be argued that the largest potential for energy savings based on process integration is in the intermediate size industry. But this is also the industrial scale in which it is most difficult to make the introduction of energy saving measures economically interesting. The reasons......' and therefore lead to non-optimal economic solutions, which may be right. But the objective of the optimisation is not to reach the best economic solution, but to relatively quickly develop the design of a simple and operationally friendly network without losing too much energy saving potential. (C) 2002...

Fundamental solutions for Schrödinger operators with general inverse square potentials

KAUST Repository

Chen, Huyuan; Alhomedan, Suad; Hajaiej, Hichem; Markowich, Peter A.

2017-01-01

In this paper, we clarify the fundamental solutions for Schrödinger operators given as (Formula presented.), where the potential V is a general inverse square potential in (Formula presented.) with (Formula presented.). In particular, letting (Formula presented.),(Formula presented.) where (Formula presented.), we discuss the existence and nonexistence of positive fundamental solutions for Hardy operator (Formula presented.), which depend on the parameter t.

Fundamental solutions for Schrödinger operators with general inverse square potentials

KAUST Repository

Chen, Huyuan

2017-03-17

In this paper, we clarify the fundamental solutions for Schrödinger operators given as (Formula presented.), where the potential V is a general inverse square potential in (Formula presented.) with (Formula presented.). In particular, letting (Formula presented.),(Formula presented.) where (Formula presented.), we discuss the existence and nonexistence of positive fundamental solutions for Hardy operator (Formula presented.), which depend on the parameter t.

Molecular dynamics simulations of solutions at constant chemical potential

Science.gov (United States)

Perego, C.; Salvalaglio, M.; Parrinello, M.

2015-04-01

Molecular dynamics studies of chemical processes in solution are of great value in a wide spectrum of applications, which range from nano-technology to pharmaceutical chemistry. However, these calculations are affected by severe finite-size effects, such as the solution being depleted as the chemical process proceeds, which influence the outcome of the simulations. To overcome these limitations, one must allow the system to exchange molecules with a macroscopic reservoir, thus sampling a grand-canonical ensemble. Despite the fact that different remedies have been proposed, this still represents a key challenge in molecular simulations. In the present work, we propose the Constant Chemical Potential Molecular Dynamics (CμMD) method, which introduces an external force that controls the environment of the chemical process of interest. This external force, drawing molecules from a finite reservoir, maintains the chemical potential constant in the region where the process takes place. We have applied the CμMD method to the paradigmatic case of urea crystallization in aqueous solution. As a result, we have been able to study crystal growth dynamics under constant supersaturation conditions and to extract growth rates and free-energy barriers.

Energy consumption and CO2 emissions of industrial process technologies. Saving potentials, barriers and instruments

International Nuclear Information System (INIS)

Fleiter, Tobias; Schlomann, Barbara; Eichhammer, Wolfgang

2013-01-01

Which contribution can the increase of energy efficiency achieve in the industry energy for the energy transition in Germany? To answer this question a model-based analysis of existing energy efficiency potentials of the energy-intensive industries is performed, which account for about 70% of the total energy demand of the industry. Based on this industry for each sector are instruments proposed for the implementation of the calculated potential and to overcome the existing barriers. [de

DEVELOPMENT OF TECHNOLOGICAL SOLUTIONS FOR THE BEVERAGE INDUSTRY PREVENTIVE ORIENTATION

Directory of Open Access Journals (Sweden)

N. V. Nepovinnykh

2014-01-01

Full Text Available Summary. Market demand for foods with low fat content has been expanding, but for low-fat foods good organoleptic properties need new food ingredients and solutions. Food hydrocolloids, polysaccharides and milk proteins, now are widely used in various industries, including the dairy industry, performing various functions: to thicken aqueous solutions, foaming and stabilizing foams and others. We studied the functional and technological properties and developed technology of new types of oxygencontaining beverages (smoothies on the basis of cheese whey, natural fruit and berry juices and purees and dietary fibres «Citri-Fi», including non-starch polysaccharides (guar gum and xanthan gum, contributing to the formation of a specific texture and drink as stabilizers oxygen foam. When creating new kinds of smoothies performed construction flavored beverage profile, the definition of rational parameters of preparation and entering dietary fibres; selection of the optimal concentration of dietary fiber for the formation of the desired consistency (texture drink; study of quality and safety of new types of drinks and justification expiration dates. Based on the studies found that the use as stabilizers structure oxygen smoothie dietary fibres «Citri-Fi» in concentrations of 0.8 – 1 % and non-starch polysaccharides at concentrations of 0.1 - 0.3 % contributes to the production of foams drinks with a sufficiently high magnification. Increasing the dose of dietary fibres in making smoothies viscosity increases and weighting system, drink bad whipped, there is separation of the product into phases, the system becomes thermodynamically unstable. Production technology and recipes for new types of smoothies with dietary fibres. Preventive orientation developed oxygenated drinks allows to include them in the diet of patients with chronic heart failure, which is confirmed by appropriate investigations.

Legacy to Industry 4.0: A Profibus Sniffer

Science.gov (United States)

Tsegaye Mamo, Fesseha; Sikora, Axel; Rathfelder, Christoph

2017-07-01

Legacy industrial communication protocols are proved robust and functional. During the last decades, the industry has invented completely new or advanced versions of the legacy communication solutions. However, even with the high adoption rate of these new solutions, still the majority industry applications run on legacy, mostly fieldbus related technologies. Profibus is one of those technologies that still keep on growing in the market, albeit a slow in market growth in recent years. A retrofit technology that would enable these technologies to connect to the Internet of Things, utilize the ever growing potential of data analysis, predictive maintenance or cloud-based application, while at the same time not changing a running system is fundamental.

Existence of solutions to quasilinear Schrodinger equations with indefinite potential

Directory of Open Access Journals (Sweden)

Zupei Shen

2015-04-01

Full Text Available In this article, we study the existence and multiplicity of solutions of the quasilinear Schrodinger equation $$ -u''+V(xu-(|u| ^2''u=f(u $$ on $\\mathbb{R}$, where the potential $V$ allows sign changing and the nonlinearity satisfies conditions weaker than the classical Ambrosetti-Rabinowitz condition. By a local linking theorem and the fountain theorem, we obtain the existence and multiplicity of solutions for the equation.

Numerical solution of the full potential equation using a chimera grid approach

Science.gov (United States)

Holst, Terry L.

1995-01-01

A numerical scheme utilizing a chimera zonal grid approach for solving the full potential equation in two spatial dimensions is described. Within each grid zone a fully-implicit approximate factorization scheme is used to advance the solution one interaction. This is followed by the explicit advance of all common zonal grid boundaries using a bilinear interpolation of the velocity potential. The presentation is highlighted with numerical results simulating the flow about a two-dimensional, nonlifting, circular cylinder. For this problem, the flow domain is divided into two parts: an inner portion covered by a polar grid and an outer portion covered by a Cartesian grid. Both incompressible and compressible (transonic) flow solutions are included. Comparisons made with an analytic solution as well as single grid results indicate that the chimera zonal grid approach is a viable technique for solving the full potential equation.

Integrated Computational Solution for Predicting Skin Sensitization Potential of Molecules.

Directory of Open Access Journals (Sweden)

Konda Leela Sarath Kumar

Full Text Available Skin sensitization forms a major toxicological endpoint for dermatology and cosmetic products. Recent ban on animal testing for cosmetics demands for alternative methods. We developed an integrated computational solution (SkinSense that offers a robust solution and addresses the limitations of existing computational tools i.e. high false positive rate and/or limited coverage.The key components of our solution include: QSAR models selected from a combinatorial set, similarity information and literature-derived sub-structure patterns of known skin protein reactive groups. Its prediction performance on a challenge set of molecules showed accuracy = 75.32%, CCR = 74.36%, sensitivity = 70.00% and specificity = 78.72%, which is better than several existing tools including VEGA (accuracy = 45.00% and CCR = 54.17% with 'High' reliability scoring, DEREK (accuracy = 72.73% and CCR = 71.44% and TOPKAT (accuracy = 60.00% and CCR = 61.67%. Although, TIMES-SS showed higher predictive power (accuracy = 90.00% and CCR = 92.86%, the coverage was very low (only 10 out of 77 molecules were predicted reliably.Owing to improved prediction performance and coverage, our solution can serve as a useful expert system towards Integrated Approaches to Testing and Assessment for skin sensitization. It would be invaluable to cosmetic/ dermatology industry for pre-screening their molecules, and reducing time, cost and animal testing.

Potential for reuse of effluent from fish-processing industries

Directory of Open Access Journals (Sweden)

Luana Morena Rodrigues Vitor Dias Ferraciolli

2017-09-01

Full Text Available The most common problems in the fish processing industry relate to high water consumption and the generation of effluents with concentrated organic loads. Given that reuse can represent an alternative for sustainable development, this study sought to assess the potential for recycling effluents produced in a fish-processing plant. In order to do so, the final industrial effluent was analyzed using the American Public Health Association (APHA standard effluent-analysis method (2005. In addition, the study assessed treatments which produce effluents meeting the requirements prescribed by different countries' regulations for reuse and recycling. The results found that effluents with smaller organic loads, such as those from health barriers and monoblock washing, can be treated in order to remove nutrients and solids so that they can be subsequently reused. For effluents produced by the washing and gutting cylinders, it is recommended that large fragments of solid waste be removed beforehand. Effluents can in this way attain a quality compatible with industrial reuse. This study further highlights the possibility of treating effluents so as comply with drinking water standards. This would potentially allow them to be used within the actual fish-processing procedure; in such a case, a revision of standards and measures for controlling use should be considered to prevent microbiological damage to products and risks to handlers and final consumers.

Economic potential of natural gas-fired cogeneration--analysis of Brazil's chemical industry

International Nuclear Information System (INIS)

Szklo, A.S.; Soares, J.B.; Tolmasquim, M.T.

2004-01-01

This paper attempts to estimate the technical and economic potential for natural gas-fired cogeneration (NGCHP) in Brazil's chemical industry as well as also analyses the impacts of specific incentive policies on the economic feasibility of this potential. Currently, the NGCHP installed capacity at Brazil's chemical industry is still quite a low figure, although the chemical plants are under heavy pressures to: (1) cut costs; and (2) show a rising awareness of the importance of power service quality, underscored even more heavily by Brazil's recent power crisis. According this study, a natural gas-fired remaining technical potential of 1.4 GW is noted in the Brazilian chemical industry. Financing policies showed to be the stand-alone policy that would be most successful for ensuring the economic feasibility of this technical potential. Nevertheless, this policy proved to be affected by the economic scenario under consideration, which includes world oil prices, electricity tariff and foreign exchange ratio possible paths. Consequently, the key issue is related to the ability to assess which economic scenario is rated as more probable by possible future investors in NGCHP, and then selecting the most appropriate incentive policy

Brane solutions sourced by a scalar with vanishing potential and classification of scalar branes

Energy Technology Data Exchange (ETDEWEB)

Cadoni, Mariano [Dipartimento di Fisica, Università di Cagliari,Cittadella Universitaria, 09042 Monserrato (Italy); INFN, Sezione di Cagliari,Cagliari (Italy); Franzin, Edgardo [Dipartimento di Fisica, Università di Cagliari,Cittadella Universitaria, 09042 Monserrato (Italy); INFN, Sezione di Cagliari,Cagliari (Italy); CENTRA, Departamento de Física, Instituto Superior Técnico, Universidade de Lisboa,Avenida Rovisco Pais 1, 1049 Lisboa (Portugal); Serra, Matteo [Dipartimento di Matematica, Sapienza Università di Roma,Piazzale Aldo Moro 2, 00185 Roma (Italy)

2016-01-20

We derive exact brane solutions of minimally coupled Einstein-Maxwell-scalar gravity in d+2 dimensions with a vanishing scalar potential and we show that these solutions are conformal to the Lifshitz spacetime whose dual QFT is characterized by hyperscaling violation. These solutions, together with the AdS brane and the domain wall sourced by an exponential potential, give the complete list of scalar branes sourced by a generic potential having simple (scale-covariant) scaling symmetries not involving Galilean boosts. This allows us to give a classification of both simple and interpolating brane solution of minimally coupled Einstein-Maxwell-scalar gravity having no Schrödinger isometries, which may be very useful for holographic applications.

Industrial Hemp in North America: Production, Politics and Potential

Directory of Open Access Journals (Sweden)

Jerome H. Cherney

2016-11-01

Full Text Available Most of the Western World banned the cultivation of Cannabis sativa in the early 20th century because biotypes high in ∆9-tetrahydrocannabinol (THC, the principal intoxicant cannabinoid are the source of marijuana. Nevertheless, since 1990, dozens of countries have authorized the licensed growth and processing of “industrial hemp” (cultivars with quite low levels of THC. Canada has concentrated on hemp oilseed production, and very recently, Europe changed its emphasis from fiber to oilseed. The USA, historically a major hemp producer, appears on the verge of reintroducing industrial hemp production. This presentation provides updates on various agricultural, scientific, social, and political considerations that impact the commercial hemp industry in the United States and Canada. The most promising scenario for the hemp industry in North America is a continuing focus on oilseed production, as well as cannabidiol (CBD, the principal non-intoxicant cannabinoid considered by many to have substantial medical potential, and currently in great demand as a pharmaceutical. Future success of the industrial hemp industry in North America is heavily dependent on the breeding of more productive oilseed cultivars, the continued development of consumer goods, reasonable but not overly restrictive regulations, and discouragement of overproduction associated with unrealistic enthusiasm. Changing attitudes have generated an unprecedented demand for the cannabis plant and its products, resulting in urgent needs for new legislative, regulatory, and business frameworks, as well as scientific, technological, and agricultural research.

Flat structure and potential vector fields related with algebraic solutions to Painlevé VI equation

Directory of Open Access Journals (Sweden)

Mitsuo Kato

2018-01-01

Full Text Available A potential vector field is a solution of an extended WDVV equation which is a generalization of a WDVV equation. It is expected that potential vector fields corresponding to algebraic solutions of Painlevé VI equation can be written by using polynomials or algebraic functions explicitly. The purpose of this paper is to construct potential vector fields corresponding to more than thirty non-equivalent algebraic solutions.

SOUTH AMERICA: INDUSTRIAL ROUNDWOOD SUPPLY POTENTIAL

Directory of Open Access Journals (Sweden)

Ronalds W. Gonzalez

2008-02-01

Full Text Available South America has substantial potential to expand its forest plantations and raw material supply. From 1997 to 2005, South America had a high annual growth rate in the production of industrial roundwood, with Brazil and Chile being the most important countries. In the same period, Asia had the only negative regional production growth rate in the world, and China became the largest round wood importer in the world. This paper summarizes the status of production, consumption, imports, and exports of industrial roundwood and forest products in South America. Produc-tion and exports from South America have continually increased at annual growth rates exceeding the forestry sector in general and the U.S. in particular. Based on timber growing investments to date, a strong timber production and forest products manufacturing sector has developed in the Southern Cone countries of Chile, Brazil, Argentina, and Uruguay, and is increasing in other countries in Latin America. There will be continued opportunities for forest plantations and new manufacturing facilities throughout South America, tempered somewhat by perceived country financial and political risks. These opportunities will allow South America to increase its share of world production and increase imports to North America and to Asia.

Application of GaN in Hard-switching Converters:Challenges and Potential Solutions%Application of GaN in Hard-switching Converters: Challenges and Potential Solutions

Institute of Scientific and Technical Information of China (English)

Bo LIU; Zhe-yu ZHANG; Edward Jones; Fei(Fred) WANG

2017-01-01

This paper overviews the benefits,challenges,research trends and potential solutions on the design and application of gallium nitride (GaN) technology in hard-switching power electronic converters from the device level up to converter level.

The potential for Internet commerce in the gas industry

International Nuclear Information System (INIS)

MacLellan, I.

1999-01-01

The potential for Internet commerce in natural gas is examined from the point of view of residential and commercial consumers, government agencies and industry associations, energy marketers and utilities. The overall conclusion of the inquiry is that there are many advantages for everyone concerned, but the few disadvantages that do exist, will delay implementation for a while. Impediments from the consumer's point of view are the natural desire to 'touch and feel' the product purchased, and the reluctance to put a credit card number on the web. The supplier's major reluctance may be that Internet commerce makes product differentiation difficult. The author provides a number of reasons why i nternetting' of the energy industry will eventually become inevitable, as well as tips on how perceived difficulties either do not apply to the gas industry, or can be overcome with only minor changes in attitudes on the part of consumers, and relatively painless adjustments in the way of doing business by suppliers and marketers

Development of Tools for Ensuring the Quality of Labor Potential of Industrial Enterprises

Directory of Open Access Journals (Sweden)

Ruslan Skrynkovskyy

2017-09-01

Full Text Available The purpose of the article is to deepen theoretical and methodological provisions and to develop tools for ensuring the quality of labor potential of industrial enterprises. It was established that the basis of the development of tools for quality assurance of labor potential (within the framework of the development of industrial enterprises lies the system of goals of managerial diagnostics of an industrial enterprise, which includes such key diagnostic objectives as: 1 diagnostics of the effectiveness of controlling the internal business processes of the enterprise; 2 diagnostics of the effectiveness of the typical organizational structure of enterprise management; 3 diagnostics of the efficiency of standardization of the work of linear and functional managers and specialists at the enterprise; 4 diagnostics of the enterprise in the areas of vocational education, labor activity and motivation, innovation work and social development; 5 diagnostics of management policies in the areas of social responsibility, information security and labor protection; 6 diagnostics of the level of conflict in the team at the enterprise 7 diagnosis of the effectiveness of the use of information technology in the management of the enterprise. It was determined that effective management of the quality of labor potential of the personnel (on the basis of its objective assessment is one of the key conditions that determines the success of industrial enterprises. The prospect of further research in this direction is improving the system of diagnostics and planning of reserves for improving the quality of labor potential of an industrial enterprise in crisis conditions.

The potential for an Australian uranium industry

International Nuclear Information System (INIS)

Silver, J.M.

1982-06-01

The production of uranium and its part upgrading to enriched uranium for export could be equivalent to 20-25 per cent of Australia's future export income from coal. Australia could be supplying 15,000 tonnes U/yr. and enrichment services of 2.5 million SWU/yr. by 2000. The principles of nuclear energy, nuclear power reactors and the nuclear fuel cycle are described and the relationship between nuclear power and the requirements for uranium and the other steps in the fuel cycle is discussed. Estimates are given of the future world supply-demand balance for each step in the fuel cycle. A survey is made of world uranium resources and fuel cycle upgrading facilities. The costs of production and pricing are assessed in relation to the potential for an Australian industry. Comments are made on the possibility that Australia could provide the repository for both low-level radioactive waste from small countries and the bulk of the world's high level waste. The impact of a uranium industry on the Australian economy is discussed

Greenhouse effect: there are solutions

International Nuclear Information System (INIS)

Anon.

1997-01-01

A review of solutions that may be undertaken in order to reduce the greenhouse effect gas emissions is presented: clean energy generation through municipal, agricultural and industrial waste processing, reducing energy consumption through public transportation promotion, clean fuel buses and vehicles, or using energy efficient boilers, reduction of carbon dioxide emission from industry through process optimization, waste recycling, energy substitution and conservation, diminution of CO 2 emissions in commercial and residential sectors through space heating and air conditioning retrofitting, lighting substitution. Pollution abatement potentials are evaluated in each case, notably in France

Analytical solutions of the Dirac equation under Hellmann–Frost–Musulin potential

International Nuclear Information System (INIS)

Onate, C.A.; Onyeaju, M.C.; Ikot, A.N.

2016-01-01

The approximate analytical solutions of the Dirac equation with Hellmann–Frost–Musulin potential have been studied by using the generalized parametric Nikiforov–Uvarov (NU) method for arbitrary spin–orbit quantum number k under the spin and pseudospin symmetries. The Hellmann–Frost–Musulin potential is a superposition potential that consists of Yukawa potential, Coulomb potential, and Frost–Musulin potential. As a particular case, we found the energy levels of the non-relativistic limit of the spin symmetry. The energy equation of Yukawa potential, Coulomb potential, Hellmann potential and Frost–Musulin potential are obtained. Energy values are generated for some diatomic molecules.

Analytical solutions of the Dirac equation under Hellmann–Frost–Musulin potential

Energy Technology Data Exchange (ETDEWEB)

Onate, C.A., E-mail: oaclems14@physicist.net [Physics Department, University of Benin (Nigeria); Onyeaju, M.C.; Ikot, A.N. [Theoretical Physics Group, Physics Department, University of Port Harcourt (Nigeria)

2016-12-15

The approximate analytical solutions of the Dirac equation with Hellmann–Frost–Musulin potential have been studied by using the generalized parametric Nikiforov–Uvarov (NU) method for arbitrary spin–orbit quantum number k under the spin and pseudospin symmetries. The Hellmann–Frost–Musulin potential is a superposition potential that consists of Yukawa potential, Coulomb potential, and Frost–Musulin potential. As a particular case, we found the energy levels of the non-relativistic limit of the spin symmetry. The energy equation of Yukawa potential, Coulomb potential, Hellmann potential and Frost–Musulin potential are obtained. Energy values are generated for some diatomic molecules.

Recovery of fission products from waste solutions utilizing controlled cathodic potential electrolysis

International Nuclear Information System (INIS)

Carlin, W.W.; Darlington, W.B.

1975-01-01

Fission products, e.g., palladium, rhodium and technetium, are recovered from aqueous waste solutions thereof, e.g., aged Purex alkaline waste solutions. The metal values from the waste solutions are extracted by ion exchange techniques. The metals adsorbed by the ion exchange resin are eluted and selectively recovered by controlled cathodic potential electrolysis. The metal values deposited on the cathode are recovered and, if desired, further purified

Evaluating the Level of the Export-Import Potential of Industrial Enterprises: Methodical Support

Directory of Open Access Journals (Sweden)

Otenko Vasyl I.

2017-04-01

Full Text Available The article provides a detailed description of the methodical support for evaluating the level of development and use of the export-import potential of industrial enterprises. The place of evaluation in the system of management of the enterprise’s export-import potential (EIPE, as well as its conceptual content have been defined. An implementation of the proposed methodical support for evaluation of the EIPE has been displayed on the example of the major industrial enterprises of the city of Kharkiv. It has been substantiated that the objectivity and effectiveness of evaluation of the level of export-import potential of industrial enterprises is methodically ensured by: the system of partial indicators allowing for regular monitoring and diagnosing tendencies in the status and the use of the EIPE; the analytical tool – i.e. cluster, factor, and canonical analyzes to identify causal relationships in the components of potential and to determine the indicators of impact; the development and use of the EIPE, as well as the evaluation procedure itself, which is recommended for implementation in accordance with the appropriate stages.

Assessment of clean development mechanism potential of large-scale energy efficiency measures in heavy industries

International Nuclear Information System (INIS)

Hayashi, Daisuke; Krey, Matthias

2007-01-01

This paper assesses clean development mechanism (CDM) potential of large-scale energy efficiency measures in selected heavy industries (iron and steel, cement, aluminium, pulp and paper, and ammonia) taking India and Brazil as examples of CDM project host countries. We have chosen two criteria for identification of the CDM potential of each energy efficiency measure: (i) emission reductions volume (in CO 2 e) that can be expected from the measure and (ii) likelihood of the measure passing the additionality test of the CDM Executive Board (EB) when submitted as a proposed CDM project activity. The paper shows that the CDM potential of large-scale energy efficiency measures strongly depends on the project-specific and country-specific context. In particular, technologies for the iron and steel industry (coke dry quenching (CDQ), top pressure recovery turbine (TRT), and basic oxygen furnace (BOF) gas recovery), the aluminium industry (point feeder prebake (PFPB) smelter), and the pulp and paper industry (continuous digester technology) offer promising CDM potential

Electricity demand and conservation potential in the Chinese nonmetallic mineral products industry

International Nuclear Information System (INIS)

Lin, Boqiang; Ouyang, Xiaoling

2014-01-01

As the high energy-consuming manufacturing industry, electricity consumption of nonmetallic mineral products in China accounted for 7.93% of industrial, 5.84% of national and 1.33% of global electricity consumption in 2010. This study attempts to specify the determinants of sectoral electricity demand, forecast future electricity consumption by creating a model using the Johansen cointegration methodology and estimate the sectoral electricity conservation potential. Results indicate that GDP per capita is the leading force explaining the sectoral electricity consumption increase, while value-added per worker, R and D intensity and electricity price are the main factors contributing to the sectoral electricity consumption decrease. Results demonstrate that sectoral electricity consumption in 2020 will be 369.79–464.83 billion kWh under the low-growth scenario and 530.14–666.39 billion kWh under the high-growth scenario. Moreover, under the low-growth scenario, the sectoral electricity conservation potential in 2020 will be 33.72–95.03 billion kWh, accounting for 0.45–1.26% of China's total electricity demand in 2020; under the high-growth scenario, the sectoral electricity conservation potential in 2020 will be 48.34–136.24 billion kWh, accounting for 0.26–0.74% of world's total electricity consumption in 2010 respectively. Finally, we provide some policy recommendations for encouraging energy conservation in China's nonmetallic mineral products industry. - Highlights: • A long-term relationship of electricity demand in nonmetallic minerals industry is established. • Determinants of the sectoral electricity consumption are specified. • The sectoral electricity demand and saving potential are analyzed using scenarios analysis. • Electricity saving potential will be 48.34–136.24 billion kWh under the high-growth scenario

Community beliefs about childhood obesity: its causes, consequences and potential solutions.

Science.gov (United States)

Covic, Tanya; Roufeil, Louise; Dziurawiec, Suzanne

2007-06-01

The objective of this study was to explore community beliefs about the causes, consequences and potential solutions of childhood obesity. A convenience sample of 434 adults (41.2 +/- 13.3 years; 61% parents) in New South Wales, Australia, was surveyed using a newly developed childhood obesity scale. Five causal (emotional eating; eating habits and food knowledge; environmental dysfunction; abundance of contemporary lifestyle; cost of contemporary lifestyle), four consequences (known consequences of obesity; behavioural consequences; social consequences; less-known physical consequences) and three potential solutions factors (parental actions; professional assistance; limiting behaviours) were identified. Parents did not differ from non-parents across the 12 factors nor were there any differences based on the level of education. There were, however, gender differences across two causal factors (emotional eating and abundance of contemporary lifestyle) and two consequences factors (behavioural consequences and social consequences), with females endorsing all four factors more strongly than males. The results of this study suggest that this sample was aware of the complex nature of childhood obesity in terms of its causes, consequences and a range of potential solutions, but they endorsed more family rather than community-based interventions.

Potential of Basidiomycetous Fungi Isolated from Gunung Barus Forest North Sumatera in Decolorization of Wastewater of Textile Industry

Science.gov (United States)

Munir, E.; Priyani, N.; Suryanto, D.; Naimah, Z.

2017-03-01

A study of basidiomycetous fungi in decolorization of wastewater of textile industry has been started in our laboratory. The objective of this study was to obtain potential isolates and to examine their decolorization acitity. The fungi were isolated from local forest, Gunung Barus Forest, in North Sumatera and screened their ligninolytic activity qualitatively by bavendam method and the waste was obtained from local textile industry in Medan. Nineteen fungal isolates grew on plate agar medium containing 100% of waste supplemented with 2% glucose, and 6 of those exhibited good growth when glucose in the media was reduced to 1%. Surprisingly, these six potential isolates grew, although relatively at lower rate, when glucose was not included in the media. Meanwhile, there was no substantial decolorization of media could be observed on all plates cultures. Analyses of decolorization on liquid condition containing 25% of wastewater and no glucose showed that fungal grew at the bottom culture flask. All 6 isolates exhibited decolorization activity. Interestingly, mass of mycelia growth at the bottom absorbed dyes and dissolved suspended solid which was seemingly separated from very clean solution medium surrounding. These results indicated that the cultures utilized carbon source from waste and the extracellular matrixes produced by fungal isolates might involve in decolorization of textile wastewater.

Potential redox behaviour on industrial wastes treatment; Evolucion del potencial redox en tratamiento y depuracion industrial de aguas

Energy Technology Data Exchange (ETDEWEB)

Marin Galvin, R.; rodriguez Mellado, J. M.; Ruiz Montoya, M.; Jimenez Gamero, C. [Departamento Quimica Fisica y Termodinamica aplicada, Facultad de ciencias, Universidad de Cordoba (Spain)

1995-12-31

A study over the behaviour of redox potential in waters and wastewaters under industrial treatment processes has been carried out. In both cases, the potential-time curves obtained were in a logarithmical shape being more strongly distorted when the waters contained more dissolved and suspended compounds. Oxygen fundamentally leads the redox state in wastewaters, although ozone and chlorine almost oxygen lead the redox potential in raw waters intended to drinking water production. In this way, by increasing 210 m V the E{sub H} value of water or maintaining the rH>21.8 it can be industrially sterilized the drinking water. On the other hand, increases of 350 mV in the EH values from wastewaters influent to plant to the treated waters, allowed discarding 450 mg/l of DQO and 9 mg/l of NH{sub 3} from the former. Finally, the exploitation of the Wastewaters Treatment Plant by regulation of the E{sub H} values can suppose a good practice. (Author) 14 refs.

Potential Applications of Carbohydrases Immobilization in the Food Industry

Science.gov (United States)

Contesini, Fabiano Jares; de Alencar Figueira, Joelise; Kawaguti, Haroldo Yukio; de Barros Fernandes, Pedro Carlos; de Oliveira Carvalho, Patrícia; Nascimento, Maria da Graça; Sato, Hélia Harumi

2013-01-01

Carbohydrases find a wide application in industrial processes and products, mainly in the food industry. With these enzymes, it is possible to obtain different types of sugar syrups (viz. glucose, fructose and inverted sugar syrups), prebiotics (viz. galactooligossacharides and fructooligossacharides) and isomaltulose, which is an interesting sweetener substitute for sucrose to improve the sensory properties of juices and wines and to reduce lactose in milk. The most important carbohydrases to accomplish these goals are of microbial origin and include amylases (α-amylases and glucoamylases), invertases, inulinases, galactosidases, glucosidases, fructosyltransferases, pectinases and glucosyltransferases. Yet, for all these processes to be cost-effective for industrial application, a very efficient, simple and cheap immobilization technique is required. Immobilization techniques can involve adsorption, entrapment or covalent bonding of the enzyme into an insoluble support, or carrier-free methods, usually based on the formation of cross-linked enzyme aggregates (CLEAs). They include a broad variety of supports, such as magnetic materials, gums, gels, synthetic polymers and ionic resins. All these techniques present advantages and disadvantages and several parameters must be considered. In this work, the most recent and important studies on the immobilization of carbohydrases with potential application in the food industry are reviewed. PMID:23344046

Disposal of by-products in olive oil industry: waste-to-energy solutions

International Nuclear Information System (INIS)

Caputo, Antonio C.; Scacchia, Federica; Pelagagge, Pacifico M.

2003-01-01

Olive oil production industry is characterized by relevant amounts of liquid and solid by-products [olive mill wastewater (OMW) and olive husk (OH)], and by economical, technical and organizational constraints that make difficult the adoption of environmentally sustainable waste disposal approaches. In this context, waste treatment technologies aimed at energy recovery represent an interesting alternative. In the paper, a technical and economical analysis of thermal disposal plant solutions with energy recovery has been carried out. The considered plants enable the combined treatment of OMW and OH which, although penalizes the energy recovery, proves to be feasible and profitable in a future legislative scenario when stricter limitation on OMW disposal will force oil producers to bear high disposal costs. Results are compared by using economic performance measures, including revenues from produced energy and avoided disposal costs. A sensitivity and risk analysis is also performed in order to assess the economic profitability of the proposed solutions

Determinable solutions for one-dimensional quantum potentials: scattering, quasi-bound and bound-state problems

International Nuclear Information System (INIS)

Lee, Hwasung; Lee, Y J

2007-01-01

We derive analytic expressions of the recursive solutions to Schroedinger's equation by means of a cutoff-potential technique for one-dimensional piecewise-constant potentials. These solutions provide a method for accurately determining the transmission probabilities as well as the wavefunction in both classically accessible regions and inaccessible regions for any barrier potentials. It is also shown that the energy eigenvalues and the wavefunctions of bound states can be obtained for potential-well structures by exploiting this method. Calculational results of illustrative examples are shown in order to verify this method for treating barrier and potential-well problems

MODIFIED BAGASSE, ITS POTENTIAL AS DECOLORANT IN THE SUGAR INDUSTRY

Directory of Open Access Journals (Sweden)

Vivian León Fernández

2015-04-01

Full Text Available In this paper, the conditions for obtaining an anionic exchanger based on the chemical modification of the fibrous fraction of bagasse by etherification in basic medium are studied. It evaluates the influence parameters concentration of sodium hydroxide, the molar ratio cellulose/diethylaminoethylamine hydrochloride and the reaction time in the substitution. In each case a degree of substitution estimated by determining the nitrogen content was obtained. It has been demostrated that the product removed 40-60 % of color in sugar solutions, therefore can be used in the sugar industry for the removal of ionic compounds.

White Paper on Potential Hazards Associated with Contaminated Cheesecloth Exposed to Nitric Acid Solutions

Energy Technology Data Exchange (ETDEWEB)

Hypes, Philip A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-09-20

This white paper addresses the potential hazards associated with waste cheesecloth that has been exposed to nitric acid solutions. This issue was highlighted by the cleanup of a 100 ml leak of aqueous nitric acid solution containing Heat Source (HS) plutonium on 21 June 2016. Nitration of cellulosic material is a well-understood process due to industrial/military applications of the resulting material. Within the Department of Energy complex, nitric acids have been used extensively, as have cellulosic wipes. If cellulosic materials are nitrated, the cellulosic material can become ignitable and in extreme cases, reactive. We have chemistry knowledge and operating experience to support the conclusion that all current wastes are safe and compliant. There are technical questions worthy of further experimental evaluation. An extent of condition evaluation has been conducted back to 2004. During this time period there have been interruptions in the authorization to use cellulosic wipes in PF-4. Limited use has been authorized since 2007 (for purposes other than spill cleanup), so our extent of condition includes the entire current span of use. Our evaluation shows that there is no indication that process spills involving high molarity nitric acid were cleaned up with cheesecloth since 2007. The materials generated in the 21 June leak will be managed in a safe manner compliant with all applicable requirements.

Industrial open source solutions for product life cycle management

Directory of Open Access Journals (Sweden)

Jaime Campos

2014-12-01

Full Text Available The authors go through the open source for product life cycle management (PLM and the efforts done from communities such as the open source initiative. The characteristics of the open source solutions are highlighted as well. Next, the authors go through the requirements for PLM. This is an area where more attention has been given as the manufacturers are competing with the quality and life cycle costs of their products. Especially, the need of companies to try to get a strong position in providing services for their products and thus to make themselves less vulnerable to changes in the market has led to high interest in product life cycle simulation. The potential of applying semantic data management to solve these problems discussed in the light of recent developments. In addition, a basic roadmap is presented as to how the above-described problems could be tackled with open software solutions.

The Development Potential in the System of Potentials of an Industrial Enterprise

Directory of Open Access Journals (Sweden)

Shpak Sergiy O.

2018-03-01

Full Text Available The aim of the article is to clarify the content and formulate a methodologically rigorous definition of the concept of enterprise development as a key category of management theory for restructuring industrial enterprises that provides the basis for a constructive definition of the concept of development potential and its place in the system of enterprise potentials. It is substantiated that the interpretation of the concept of enterprise development that is consistent with the philosophical concept of development should accumulate the concepts of competitiveness of an enterprise, as the ability to generate an acceptable profit on a long-term basis; the potential of an enterprise, as the ability to perform its basic activity characterizing the cumulative result of such activity, its marginal opportunities; the role of the structure of the enterprise as a system in the formation of its ultimate capabilities (potentials. It is shown that these requirements are met by the definition of the development process as a process of a purposeful transfer of the enterprise to a qualitatively new state described by broader opportunities for generating profits under the forecast conditions. At the same time, the structural adaptation of the enterprise to the new operating conditions is a tool for realizing the development process, which indicates the equivalence of the concepts of structural adaptability of an enterprise and its development potential. It is substantiated that the competitiveness of an enterprise is determined by its economic potential and development potential, which form the highest level of the hierarchy of potentials, the construction of which is possible in the course of decomposition of these potentials into their components according to the type of activity of the enterprise.

Energy saving potential in existing industrial compressors

International Nuclear Information System (INIS)

Vittorini, Diego; Cipollone, Roberto

2016-01-01

The Compressed Air Sector accounts for a mean 10% worldwide electricity consumption, which ensures about its importance, when energy saving and CO_2 emissions reduction are in question. Since the compressors alone account for 15% overall industry electricity consumption, it appears vital to pay attention to machine performances. The paper presents an overview of present compressor technology and focuses on saving directions for screw and sliding vanes machines, according to data provided by the Compressed Air and Gas Institute and PNEUROP. Data were processed to obtain consistency with fixed reference pressures and organized as a function of main operating parameters. Each sub-term, contributing to the overall efficiency (adiabatic, volumetric, mechanical, electric, organic), was considered separately: the analysis showed that the thermodynamic improvement during compression achievable by splitting the compression in two stages, with a lower compression ratio, opens the way to significantly reduce the energy specific consumption. - Highlights: • Compressors technology overview in industrial compressed air systems. • Market compressors efficiency baseline definition. • Energy breakdown and evaluation of main efficiency terms. • Assessment of air cooling-related energy saving potential. • Energy specific consumption reduction through dual stage compression.

More Sustainability in Industry through Industrial Internet of Things?

Directory of Open Access Journals (Sweden)

Grischa Beier

2018-01-01

Full Text Available Industrial production plays an important role for achieving a green economy and the sustainable development goals. Therefore, the nascent transformation of industrial production due to digitalization into a so-called Industrial Internet of Things (IIoT is of great interest from a sustainable development point of view. This paper discusses how the environmental dimension of a sustainable development can potentially benefit from the IIoT—focusing especially on three topics: resource efficiency, sustainable energy and transparency. It presents a state of the art literature analysis of IIoT-enabled approaches addressing the three environmental topics. This analysis is compared with the findings of a survey among Chinese industrial companies, investigating the sustainability-related expectations of participants coming along with the implementation of IIoT solutions. China has been chosen as a case study because it brings together a strong industrial sector, ambitious plans regarding industrial digitalization and a high relevance and need for more sustainability. The survey was conducted with the means of a questionnaire which was distributed via email and used for direct on-site interviews. It focused on large and medium sized companies mainly from Liaoning Province and had a sample size of 109 participants.

Social Innovation and New Industrial Contexts: Can Designers "Industrialize" Socially Responsible Solutions?

DEFF Research Database (Denmark)

Morelli, Nicola

2007-01-01

framework for this paper. An investigation is proposed beyond the traditional links between design and industry, emphasising new insights into the changes in the social role of industrial production. Furthermore, the paper proposes a methodological exploration to help designers focus on new actors and new...... perspectives in search for possible convergences between the logic of socially responsible design and the contribution of the industrial culture....

New exact travelling wave solutions for two potential coupled KdV equations with symbolic computation

International Nuclear Information System (INIS)

Yang Zonghang

2007-01-01

We find new exact travelling wave solutions for two potential KdV equations which are presented by Foursov [Foursov MV. J Math Phys 2000;41:6173-85]. Compared with the extended tanh-function method, the algorithm used in our paper can obtain some new kinds of exact travelling wave solutions. With the aid of symbolic computation, some novel exact travelling wave solutions of the potential KdV equations are constructed

On the solution of an inverse problem for confining potentials in quantum mechanics

International Nuclear Information System (INIS)

Gostev, V.B.; Mineev, V.S.; Frenkin, A.R.

1982-01-01

The problem of plotting confining (unlimitedly increasing on the infinity) potentials of the central field by the given energy spectrum is discussed. The radial Schroedinger equation has pure discrete spectrum with infinite number of levels for these potentials. The problem is solved using the Helfand-Levitan equation with a certain reference potential V(r) for which spectral characteristics differ from the given ones only in the finite number of elements. The regular solutions PHIsub(l)(E, r) of the Schroedinger equation for the reference potential V(r) are supposed to be known. The initial potential and regular solutions of the Schroedinger equation are restored by the reference potential V(r) and regular PHIsub(l)(E, r) functions by means of the known formulas. It is observed from the paper data that confining potentials with any type of spectrum can be restored. Choice of the corresponding reference potential providing Fredholm nature of the Helfand-Levitan equation is the basic problem in this case

Development of a mobile solution for delivering price quotes in the construction industry

OpenAIRE

Andersson, Filip; Pantzar, Anders

2013-01-01

The rapid growth of the mobile consumer market has influenced companies to make their workplace digital and mobile, with the goal to remove ties to a physical workplace, increase productivity, and trivialize tedious tasks. The construction industry is in need of modernization; it is a competitive market and to get a contract it is vital to provide a reasonable price quote fast.This bachelor thesis was performed together with Byggwalle AB in Västerås with the objective to create a mobile solut...

Analytic plane wave solutions for the quaternionic potential step

International Nuclear Information System (INIS)

De Leo, Stefano; Ducati, Gisele C.; Madureira, Tiago M.

2006-01-01

By using the recent mathematical tools developed in quaternionic differential operator theory, we solve the Schroedinger equation in the presence of a quaternionic step potential. The analytic solution for the stationary states allows one to explicitly show the qualitative and quantitative differences between this quaternionic quantum dynamical system and its complex counterpart. A brief discussion on reflected and transmitted times, performed by using the stationary phase method, and its implication on the experimental evidence for deviations of standard quantum mechanics is also presented. The analytic solution given in this paper represents a fundamental mathematical tool to find an analytic approximation to the quaternionic barrier problem (up to now solved by numerical method)

Antitrust Enforcement in the Electricity and Gas Industries: Problems and Solutions for the EU

International Nuclear Information System (INIS)

Leveque, Francois

2006-01-01

Antitrust enforcement in the electricity and gas industries raises specific problems that call for specific solutions. Among the issues: How can the anticompetitive effects of mergers be assessed in a changing regulatory environment? Should long-term agreements in energy purchasing be prohibited? What are the benefits of preventive action such as competition advocacy and market surveillance committees? Should Article 82 (a) of the EC Treaty be used to curb excessive pricing?. (author)

Mass Customisation and Highly Individualised Solutions. Stretching Mass Customisation Beyond the Traditional Paradigm of Industrial Production

DEFF Research Database (Denmark)

Morelli, Nicola; Nielsen, Louise Møller

2007-01-01

and consumption patterns. The reference to a paradigm shift helps emphasising the inherent limits of industrial production and the elements of changes brought about by the possibility to generate highly individualised solutions. The concept of mass customisation was introduced to extend the domain of industrial...... production beyond its original limitations, however it is strongly linked to the paradigm of industrial production and not always usable to support and explain new ways of organising value creation. This paper proposes an analysis of this paradigm shift through three cases, which emphasise some elements...... of mass customisation that are still relevant to the new paradigm. At the same time the paper emphasises the limits of this concept and the need for a new perspective view to interpret the ongoing change in production and consumption systems....

Passivation behaviour of stainless steel (UNS N-08028) in industrial or simplified phosphoric acid solutions at different temperatures

International Nuclear Information System (INIS)

Ben Salah, M.; Sabot, R.; Refait, Ph.; Liascukiene, I.; Méthivier, C.; Landoulsi, J.; Dhouibi, L.

2015-01-01

Highlights: • Industrial phosphoric acid is less aggressive than simulated industrial acid. • Polyphosphate film in Industrial acid is reinforced by calcium and sulfate. • Passive film thickness is obtained by the power law model from EIS measurements. • Passive film of Sanicro28 becomes more resistive towards corrosion with exposure time in industrial acid. • XPS measurements coupled to Raman spectroscopy reveal the corrosion products formed in simulated acid. - Abstract: The corrosion behaviour of Sanicro28, in industrial phosphoric acid and simplified solution of pure H_3PO_4 containing sulphates and chlorides, is investigated during 48 h between 20 and 80 °C. Results show higher corrosion resistance in the industrial medium. Film thickness evaluated by EIS remains constant in industrial acid due to polyphosphate that promotes crystallisation of the Cr_2O_3 inner layer. Conversely, the passive film is partially destroyed at 80 °C in simplified acid. XPS and Raman analysis show that phosphate and molybdenum are both present in the passive film and in corrosion products. The role of Ca present in the industrial acid is discussed.

The potential estimation and factor analysis of China′s energy conservation on thermal power industry

International Nuclear Information System (INIS)

Lin, Boqiang; Yang, Lisha

2013-01-01

At present, researches about energy conservation are focused on prediction. But there are few researches focused on the estimation of effective input and energy conservation potential, and there has been even no research on energy conservation of thermal power industry of China. This paper will try to fill in such a blank. Panel data on Chinese thermal power industry over 2005–2010 are established, and we adopt the stochastic frontier analysis approach to estimate the energy saving potential of thermal power industry. The results are as follows: (1) the average efficiency of energy inputs in China′s thermal power industry over 2005–2010 was about 0.85, and cumulative energy saving potential equals to 551.04 (Mtce); (2) by improving the non-efficiency factors, the relatively backward inland cities could achieve higher energy saving in thermal power industry; (3) the energy input efficiency of Eastern China Grid is shown to be the highest; (4) in order to realize the energy-saving goal of thermal power industry, one important policy method the government should adopt is to conduct a market-oriented reform in power industry and break the state-owned monopoly to provide incentives for private and foreign direct investment in thermal power sector. -- Highlights: •We adopt SFA model to estimate the coal input efficiency of power sector in China. •We calculate the cumulative energy saving potential equals to 551.04 Mtce. •East China power grid has the highest energy input efficiency. •Some backward inland cities may be the main force for future energy conservation. •Encourage private and foreign direct investment in power sector might be effective

Production of Enzymes From Agricultural Wastes and Their Potential Industrial Applications.

Science.gov (United States)

Bharathiraja, S; Suriya, J; Krishnan, M; Manivasagan, P; Kim, S-K

Enzymatic hydrolysis is the significant technique for the conversion of agricultural wastes into valuable products. Agroindustrial wastes such as rice bran, wheat bran, wheat straw, sugarcane bagasse, and corncob are cheapest and plentifully available natural carbon sources for the production of industrially important enzymes. Innumerable enzymes that have numerous applications in industrial processes for food, drug, textile, and dye use have been produced from different types of microorganisms from agricultural wastes. Utilization of agricultural wastes offers great potential for reducing the production cost and increasing the use of enzymes for industrial purposes. This chapter focuses on economic production of actinobacterial enzymes from agricultural wastes to make a better alternative for utilization of biomass generated in million tons as waste annually. © 2017 Elsevier Inc. All rights reserved.

Volta potential of clad AA2024 aluminium after exposure to CeCl3 solution

International Nuclear Information System (INIS)

Andreatta, F.; Druart, M.-E.; Marin, E.; Cossement, D.; Olivier, M.-G.; Fedrizzi, L.

2014-01-01

Highlights: • Alkaline etch of clad AA2024 enhances precipitation of Ce compounds. • Exposure to CeCl 3 solution decreases Volta potential of alkaline etched substrate. • Ce compounds reduce the driving force for initiation of localized attack. - Abstract: AA2024 clad with AA1050 was immersed in CeCl 3 solution to promote deposition of cerium species. The deposition occurs on the entire sample surface for the alkaline etched substrate, while it is very limited for the degreased substrate. The surface potential (Volta potential) was investigated by scanning Kelvin probe force microscopy after different immersion times in CeCl 3 solution. The preferential deposition of Ce compounds at Al–Fe intermetallic sites progressively reduces their Volta potential difference relative to the matrix in the alkaline etched substrate. This reduces the susceptibility to localized attack of the intermetallics as proven by potentiodynamic polarization measurements

[Ecological misunderstanding, integrative approach, and potential industries in circular economy transition].

Science.gov (United States)

Wang, Rusong

2005-12-01

Based on the Social-Economic-Natural Complex Ecosystem theory, this paper questioned 8 kinds of misunderstandings in current planning, incubation, development, and management of circular economy, which had led to either ultra-right or ultra-left actions in ecological and economic development. Rather than concentrated only on the 3-r micro-principles of "reduce-reuse-recycle", thise paper suggested 3-R macro-principles of "Rethinking-Reform-Refunction" for circular economy development. Nine kinds of eco-integrative strategies in industrial transition were put forward, i.e., food web-based horizontal/parallel coupling, life cycle-oriented vertical/serial coupling, functional service rather than products-oriented production, flexible and adaptive structure, ecosystem-based regional coupling, social integrity, comprehensive capacity building, employment enhancement, and respecting human dignity. Ten promising potential eco-industries in China's near-future circular economy development were proposed, such as the transition of traditional chemical fertilizer and pesticide industry to a new kind of industrial complex for agro-ecosystem management.

Energy Flexibility Potential of Industrial Processes in the Regulating Power Market

DEFF Research Database (Denmark)

Ma, Zheng; Aabjerg Friis, Henrik Tønder; Gravers Mostrup, Christopher

2017-01-01

, and electric heating in replacement of conventional technologies. To enable the use of demand response, the consumers must have economical and practical incentives without loss of convenience. This study aims to investigate the demand-response market potential of a flexible industrial process in the current...... electricity market structure. The Danish West regulating power market is selected in this study with an ideal process simulation of an industrial roller press. By analysing market data, the value of flexible electricity consumption by the roller press in the regulating power market is demonstrated by an ideal...

Stern potential and Debye length measurements in dilute ionic solutions with electrostatic force microscopy.

Science.gov (United States)

Kumar, Bharat; Crittenden, Scott R

2013-11-01

We demonstrate the ability to measure Stern potential and Debye length in dilute ionic solution with atomic force microscopy. We develop an analytic expression for the second harmonic force component of the capacitive force in an ionic solution from the linearized Poisson-Boltzmann equation. This allows us to calibrate the AFM tip potential and, further, obtain the Stern potential of sample surfaces. In addition, the measured capacitive force is independent of van der Waals and double layer forces, thus providing a more accurate measure of Debye length.

Assessment of risk of potential exposures on facilities industries; Estimativa do risco de exposicao potencial em instalacoes industriais

Energy Technology Data Exchange (ETDEWEB)

Leocadio, Joao Carlos

2007-03-15

This work develops a model to evaluate potential exposures on open facilities of industrial radiography in Brazil. This model will decisively contribute to optimize operational, radiological protection and safety procedures, to prevent radiation accidents and to reduce human errors in industrial radiography. The probabilistic safety assessment (PSA) methodology was very useful to assess potential exposures. The open facilities of industrial radiography were identified as the scenario to be analyzed in what concerns the evaluation of potential exposures, due to their high accidents indices. The results of the assessment of potential exposures confirm that the industrial radiography in Brazil is a high-risk practice as classified by the IAEA. The risk of potential exposure was estimated to be 40,5 x 10{sup -2} per year in Brazil, having as main consequences injuries to the workers' hands and arms. In the world scene, the consequences are worst, leading to fatalities of people, thus emphasizing the high risk of industrial radiography. (author)

Assessment of risk of potential exposures on facilities industries; Estimativa do risco de exposicao potencial em instalacoes industriais

Energy Technology Data Exchange (ETDEWEB)

Leocadio, Joao Carlos

2007-03-15

This work develops a model to evaluate potential exposures on open facilities of industrial radiography in Brazil. This model will decisively contribute to optimize operational, radiological protection and safety procedures, to prevent radiation accidents and to reduce human errors in industrial radiography. The probabilistic safety assessment (PSA) methodology was very useful to assess potential exposures. The open facilities of industrial radiography were identified as the scenario to be analyzed in what concerns the evaluation of potential exposures, due to their high accidents indices. The results of the assessment of potential exposures confirm that the industrial radiography in Brazil is a high-risk practice as classified by the IAEA. The risk of potential exposure was estimated to be 40,5 x 10{sup -2} per year in Brazil, having as main consequences injuries to the workers' hands and arms. In the world scene, the consequences are worst, leading to fatalities of people, thus emphasizing the high risk of industrial radiography. (author)

Analysis of the economic potential of solar thermal energy to provide industrial process heat. Final report, Volume I. [In-depth analysis of 78 industries

Energy Technology Data Exchange (ETDEWEB)

None

1977-02-07

The process heat data base assembled as the result of this survey includes specific process applications from 78 four-digit Standard Industrial Classification (SIC) groups. These applications account for the consumption of 9.81 quadrillion Btu in 1974, about 59 percent of the 16.6 quadrillion Btu estimated to have been used for all process heat in 1974. About 7/sup 1///sub 2/ percent of industrial process heat is used below 212/sup 0/F (100/sup 0/C), and 28 percent below 550/sup 0/F (288/sup 0/C). In this study, the quantitative assessment of the potential of solar thermal energy systems to provide industrial process heat indicates that solar energy has a maximum potential to provide 0.6 quadrillion Btu per year in 1985, and 7.3 quadrillion Btu per year in 2000, in economic competition with the projected costs of conventional fossil fuels for applications having a maximum required temperature of 550/sup 0/ (288/sup 0/C). A wide variety of collector types were compared for performance and cost characteristics. Performance calculations were carried out for a baseline solar system providing hot water in representative cities in six geographical regions within the U.S. Specific industries that should have significant potential for solar process heat for a variety of reasons include food, textiles, chemicals, and primary metals. Lumber and wood products, and paper and allied products also appear to have significant potential. However, good potential applications for solar process heat can be found across the board throughout industry. Finally, an assessment of nontechnical issues that may influence the use of solar process heat in industry showed that the most important issues are the establishment of solar rights, standardization and certification for solar components and systems, and resolution of certain labor-related issues. (Volume 1 of 3 volumes.)

Energy-economical optimization of industrial sites

International Nuclear Information System (INIS)

Berthold, A.; Saliba, S.; Franke, R.

2015-01-01

The holistic optimization of an industrial estate networks all electrical components of a location and combines energy trading, energy management and production processes. This allows to minimize the energy consumption from the supply network and to relieve the power grid and to maximize the profitability of the industrial self-generation. By analyzing the potential is detected and the cost of optimization solution is estimated. The generation-side optimization is supported through demand-side optimization (demand response). Through a real-time optimization the of Use of fuels is managed, controlled and optimized. [de

Numerical soliton-like solutions of the potential Kadomtsev-Petviashvili equation by the decomposition method

International Nuclear Information System (INIS)

Kaya, Dogan; El-Sayed, Salah M.

2003-01-01

In this Letter we present an Adomian's decomposition method (shortly ADM) for obtaining the numerical soliton-like solutions of the potential Kadomtsev-Petviashvili (shortly PKP) equation. We will prove the convergence of the ADM. We obtain the exact and numerical solitary-wave solutions of the PKP equation for certain initial conditions. Then ADM yields the analytic approximate solution with fast convergence rate and high accuracy through previous works. The numerical solutions are compared with the known analytical solutions

Industrial Production and Professional Application of Manufactured Nanomaterials-Enabled End Products in Dutch Industries: Potential for Exposure

NARCIS (Netherlands)

Bekker, C.; Brouwer, D.H.; Tielemans, E.; Pronk, A.

2013-01-01

Background: In order to make full use of the opportunities while responsibly managing the risks of working with manufactured nanomaterials (MNM), we need to gain insight into the potential level of exposure to MNM in the industry. Therefore, the goal of this study was to obtain an overview of the

Stern potential and Debye length measurements in dilute ionic solutions with electrostatic force microscopy

International Nuclear Information System (INIS)

Kumar, Bharat; Crittenden, Scott R

2013-01-01

We demonstrate the ability to measure Stern potential and Debye length in dilute ionic solution with atomic force microscopy. We develop an analytic expression for the second harmonic force component of the capacitive force in an ionic solution from the linearized Poisson–Boltzmann equation. This allows us to calibrate the AFM tip potential and, further, obtain the Stern potential of sample surfaces. In addition, the measured capacitive force is independent of van der Waals and double layer forces, thus providing a more accurate measure of Debye length. (paper)

PROBLEMS AND POTENTIAL OF DEVELOPMENT OF THE INDUSTRIAL ENTERPRISES OF THE KNOWLEDGE-INTENSIVE BRANCHES

Directory of Open Access Journals (Sweden)

Mikhail Yakovlevich Veselovsky

2016-01-01

Full Text Available In the article the problems of enterprise development high-tech industries, analyzes the factors that complicate the processes of knowledge-intensive production management. It provided a number of problems that make it difficult to increase the economic efficiency of high-tech industry. To solve the above problems need to increase the investment program and the economic attractiveness of high-tech industries that is to be developed, modern management system, carried out the reform of the knowledge-based industry to provide high levels of efficiency of new organizational structures in the current economic conditions compared to the existing, outdated forms. The purpose / goal. The aim of this study is to analyze the causes that affect the development potential of knowledge-based industries and enterprises identify problems that impede improving the economic efficiency of the Russian high-tech industry. Purpose: To identify the problems that are most difficult to improve the economic efficiency of the Russian high-tech industry; consider the high-tech industry; examine the reasons for the reform of the knowledge-based industry; explore the level of innovation activity of organizations of high-tech industries. Methodology. The methodological and theoretical basis of the study are the works, monographs, research papers, studies of Soviet authors on the development of knowledge-intensive industries, materials of State Statistics. We used scientific methods of research, such as the comparative method of analysis, synthesis, analysis and synthesis. Results. Given the concept of the domestic high-tech complex (NEC, defined the environment in which businesses operate NEC. The features of these companies, where there is the presence of a strong innovation potential. The requirements for knowledge-intensive production as the backbone of a new stage of the development lifecycle. A number of problems hampering the development and transformation of enterprise

Color stability of ceramic brackets immersed in potentially staining solutions.

Science.gov (United States)

Guignone, Bruna Coser; Silva, Ludimila Karsbergen; Soares, Rodrigo Villamarim; Akaki, Emilio; Goiato, Marcelo Coelho; Pithon, Matheus Melo; Oliveira, Dauro Douglas

2015-01-01

To assess the color stability of five types of ceramic brackets after immersion in potentially staining solutions. Ninety brackets were divided into 5 groups (n = 18) according to brackets commercial brands and the solutions in which they were immersed (coffee, red wine, coke and artificial saliva). The brackets assessed were Transcend (3M/Unitek, Monrovia, CA, USA), Radiance (American Orthodontics, Sheboygan, WI, USA), Mystique (GAC International Inc., Bohemia, NY, USA) and Luxi II (Rocky Mountain Orthodontics, Denver, CO, USA). Chromatic changes were analyzed with the aid of a reflectance spectrophotometer and by visual inspection at five specific time intervals. Assessment periods were as received from the manufacturer (T0), 24 hours (T1), 72 hours (T2), as well as 7 days (T3) and 14 days (T4) of immersion in the aforementioned solutions. Results were submitted to statistical analysis with ANOVA and Bonferroni correction, as well as to a multivariate profile analysis for independent and paired samples with significance level set at 5%. The duration of the immersion period influenced color alteration of all tested brackets, even though these changes could not always be visually observed. Different behaviors were observed for each immersion solution; however, brackets immersed in one solution progressed similarly despite minor variations. Staining became more intense over time and all brackets underwent color alterations when immersed in the aforementioned solutions.

Preliminary investigations of potential light weight metallic armour applications

NARCIS (Netherlands)

Voorde, M.J. van de; Diederen, A.M.; Herlaar, K.

2005-01-01

Now that an industrial-scale low-cost production route for ballistic-grade titanium is within reach, the potential use of titanium armour could depend on a solution for the spalling of high strength titanium. This paper addresses a titanium based metal laminate as being a possible solution for the

The potential/pH diagram of silver in aqueous ammonium salt solution

NARCIS (Netherlands)

Sluyters, J.H.; Wijnen, M.D.; Hul, H.J. van den

1961-01-01

The potential/pH diagram of silver in aqueous ammonium salt solution at 25°C has been calculated and verified experimentally. Calculations were carried out on the basis of the standard potential of the silver/silver-ion couple, the dissociation constants of the silver mono- and di-ammonia

Potential economic losses to the US corn industry from aflatoxin contamination.

Science.gov (United States)

Mitchell, Nicole J; Bowers, Erin; Hurburgh, Charles; Wu, Felicia

2016-01-01

Mycotoxins, toxins produced by fungi that colonise food crops, can pose a heavy economic burden to the US corn industry. In terms of economic burden, aflatoxins are the most problematic mycotoxins in US agriculture. Estimates of their market impacts are important in determining the benefits of implementing mitigation strategies within the US corn industry, and the value of strategies to mitigate mycotoxin problems. Additionally, climate change may cause increases in aflatoxin contamination in corn, greatly affecting the economy of the US Midwest and all sectors in the United States and worldwide that rely upon its corn production. We propose two separate models for estimating the potential market loss to the corn industry from aflatoxin contamination, in the case of potential near-future climate scenarios (based on aflatoxin levels in Midwest corn in warm summers in the last decade). One model uses the probability of acceptance based on operating characteristic (OC) curves for aflatoxin sampling and testing, while the other employs partial equilibrium economic analysis, assuming no Type 1 or Type 2 errors, to estimate losses due to proportions of lots above the US Food and Drug Administration (USFDA) aflatoxin action levels. We estimate that aflatoxin contamination could cause losses to the corn industry ranging from US$52.1 million to US$1.68 billion annually in the United States, if climate change causes more regular aflatoxin contamination in the Corn Belt as was experienced in years such as 2012. The wide range represents the natural variability in aflatoxin contamination from year to year in US corn, with higher losses representative of warmer years.

Potential economic losses to the USA corn industry from aflatoxin contamination

Science.gov (United States)

Mitchell, N.J.; Bowers, E.; Hurburgh, C.; Wu, F.

2016-01-01

Mycotoxins, toxins produced by fungi that colonize food crops, can pose a heavy economic burden to the United States corn industry. In terms of economic burden, aflatoxins are the most problematic mycotoxins in US agriculture. Estimates of their market impacts are important in determining the benefits of implementing mitigation strategies within the US corn industry, and the value of strategies to mitigate mycotoxin problems. Additionally, climate change may cause increases in aflatoxin contamination in corn, greatly affecting the economy of the US Midwest and all sectors in the US and worldwide that rely upon its corn production. We propose two separate models for estimating the potential market loss to the corn industry from aflatoxin contamination, in the case of potential near-future climate scenarios (based on aflatoxin levels in Midwest corn in warm summers in the last decade). One model uses probability of acceptance based on operating characteristic (OC) curves for aflatoxin sampling and testing, while the other employs partial equilibrium economic analysis, assuming no Type 1 or Type 2 errors, to estimate losses due to proportions of lots above the US Food and Drug Administration (FDA) aflatoxin action levels. We estimate that aflatoxin contamination could cause losses to the corn industry ranging from $52.1 million to $1.68 billion annually in the United States, if climate change causes more regular aflatoxin contamination in the Corn Belt as was experienced in years such as 2012. The wide range represents the natural variability in aflatoxin contamination from year to year in US corn, with higher losses representative of warmer years. PMID:26807606

Unravelling the potential of energy efficiency in the Colombian oil industry

NARCIS (Netherlands)

Yanez Angarita, Edgar Eduardo; Ramirez, Andrea; Uribe, Ariel; Castillo, Edgar; Faaij, Adrianus

2018-01-01

The oil and gas sector represents 39% of the world's total industrial final energy consumption, and contributes to around 37% of total greenhouse gas (GHG) emissions. This study investigates the potential for improvements in energy efficiency, and their implications for CO2 abatement, in the

On the existence of tunneling bounce solutions in piecewise linear potentials

International Nuclear Information System (INIS)

Dutta, Koushik; Hector, Cecelie; Konstandin, Thomas; Vaudrevange, Pascal M.; Westphal, Alexander

2012-02-01

Coleman tunneling in a general scalar potential with two non-degenerate minima is known to have an approximation in terms of a piecewise linear triangular-shaped potential with sharp 'kinks' at the place of the local minima. This approximate potential has a regime where the existence of the bounce solution needs the scalar field to 'wait' for some amount of Euclidean time at one of the 'kinks'. We discuss under which circumstances the correct bounce action can be consistently obtained as the limiting case of a regular scalar potential where 'kinks' are resolved as locally smooth 'cap' regions. (orig.)

Industrial Water Waste, Problems and the Solution

Directory of Open Access Journals (Sweden)

Alif Noor Anna

2004-01-01

Full Text Available Recently, the long term development in Indonesia has changed agricultural sector to the industrial sector. This development can apparently harm our own people. This is due to the waste that is produced from factories. The waste from various factories seems to have different characteristics. This defference encourages us to be able to find out different of methods of managing waste so that cost can be reduced, especially in water treatment. In order that industrial development and environmental preservation can run together in balance, many institutions involved should be consider, especially in the industrial chain, the environment, and human resource, these three elements can be examined in terms of their tolerance to waste.

Potential for energy-conserving capital equipment in UK industries

Energy Technology Data Exchange (ETDEWEB)

Fawkes, S D

1986-01-01

A summary is given of recent research into the potential for energy-conserving capital equipment in UK industries. The research had significant findings regarding the feasibility of achieving low-energy scenarios. It also stressed the importance of site specific factors in inhibiting incremental technical change such as that common in energy-conservation investments, developed a soft systems model of energy-management activities and investigated current progress and management styles in the brewing, malting, distilling and dairy sectors.

The potential of medical device industry in technological and economical context.

Science.gov (United States)

Maresova, Petra; Penhaker, Marek; Selamat, Ali; Kuca, Kamil

2015-01-01

The high quality of public health improves not only healthy life expectancy, but also the productivity of labor. The most important part of the health care sector is the medical technology industry. The aim of this study is to analyze the current situation in the medical device industry in Europe, its potential strengths and weaknesses in the context of topical economic and demographic development. The contribution specifies an analysis of the economic state of the medical device industry in the context of demographic development of European Union's macroeconomic indicators and views of experts in the field of medical device development, concerning the opportunities for entities involved in the medical device market. There is fierce competition on the European market. The innovative activity is stable and well regulated by responsible authorities. Worldwide, the medical device market is expected to grow.

Analytical Solutions of a Model for Brownian Motion in the Double Well Potential

International Nuclear Information System (INIS)

Liu Ai-Jie; Zheng Lian-Cun; Zhang Xin-Xin; Ma Lian-Xi

2015-01-01

In this paper, the analytical solutions of Schrödinger equation for Brownian motion in a double well potential are acquired by the homotopy analysis method and the Adomian decomposition method. Double well potential for Brownian motion is always used to obtain the solutions of Fokker—Planck equation known as the Klein—Kramers equation, which is suitable for separation and additive Hamiltonians. In essence, we could study the random motion of Brownian particles by solving Schrödinger equation. The analytical results obtained from the two different methods agree with each other well. The double well potential is affected by two parameters, which are analyzed and discussed in details with the aid of graphical illustrations. According to the final results, the shapes of the double well potential have significant influence on the probability density function. (general)

Canadian petroleum industry

Energy Technology Data Exchange (ETDEWEB)

Dagher, J.H.

1969-12-01

This study covers the following Canadian petroleum industry categories: (1) a brief history; (2) the demand for Alberta crude; (3) U.S. oil policies; (4) overseas exploration; (5) the national oil policy; (6) the Montreal pipeline and its targets; (7) a continental oil policy; and (8) the impact of Arctic reserves. It is noted that large potential benefits will improve from the Manhattan navigating the Northwest Passage. Without prejudging the analysis now applied to the information gathered on this voyage, the Manhattan has greatly contributed to the solution of the problem of access to the Arctic islands. The picture for natural gas is less fraught with uncertainties. Unlike oil, where domestic and international considerations may weigh in U.S. policy decision, Canadian natural gas is likely to be allowed to enjoy its full economic potential in bridging the foreseeable U.S. supply gap and, inasmuch as this potential is ultimately tied with that for crude oil markets, the anticipated U.S. needs for Canadian natural gas may be expected to enhance U.S. interest in the overall well-being of the Canadian petroleum industry.

Bioenergy industries development in China. Dilemma and solution

International Nuclear Information System (INIS)

Peidong, Zhang; Yanli, Yang; Xutong, Yang; Yonghong, Zheng; Lisheng, Wang; Yongsheng, Tian; Yongkai, Zhang

2009-01-01

Having 2.8 x 10 8 -3.0 x 10 8 t/a of wood energy, 4.0 x 10 6 t/a of oil seeds, 7.7 x 10 8 t/a of crops straw, 3.97 x 10 9 t/a of poultry and livestock manure, 1.48 x 10 8 t/a of municipal waste, and 4.37 x 10 10 t/a of organic wastewater, China is in possession of good resource condition for the development of bioenergy industries. Until the end of 2007, China has popularized 2.65 x 10 7 rural household biogas, established 8318 large and middle-scale biogas projects, and produced 1.08 x 10 10 m 3 /a of biogas; the production of bioethanol, biodiesel, biomass briquettes fuel and biomass power generation reached to 1.5 x 10 6 t/a, 3.0 x 10 5 t/a, 6.0 x 10 4 t/a and 6.42 x 10 9 kWh, respectively. In recent years, bioenergy industries developed increasingly fast in China. However, the industrial base was weak with some dilemma existing in raw material supply, technological capability, industry standards, policy and regulation, and follow-up services, etc. From the viewpoint of long-term effective development system for bioenergy industries in China, a series of policy suggestions have been offered, such as strengthening strategy research, improving bioenergy industries development policies and plan, enhancing scientific research input, persisting in technology innovation, establishing product quality standard, improving industrial standard system, opening market and accelerating commercialization, etc. It is expected that the advices mentioned above could be helpful for the improvement of bioenergy industries development. (author)

Exact analytic solutions generated from stipulated Morse and trigonometric Scarf potentials

International Nuclear Information System (INIS)

Saikia, N; Ahmed, S A S

2011-01-01

The extended transformation method has been applied to the exactly solvable stipulated Morse potential and trigonometric Scarf potential, to generate a set of exactly solvable quantum systems (QSs) in any chosen dimension. Bound state solutions of the exactly solvable potentials are given. The generated QSs are generally of Sturmian form. We also report a system case-specific regrouping technique to convert a Sturmian QS to a normal QS. A second-order application of the transformation method is given. The normalizability of the generated QSs is generally given in Sturmian form.

Color stability of ceramic brackets immersed in potentially staining solutions

Directory of Open Access Journals (Sweden)

Bruna Coser Guignone

2015-08-01

Full Text Available OBJECTIVE: To assess the color stability of five types of ceramic brackets after immersion in potentially staining solutions.METHODS: Ninety brackets were divided into 5 groups (n = 18 according to brackets commercial brands and the solutions in which they were immersed (coffee, red wine, coke and artificial saliva. The brackets assessed were Transcend (3M/Unitek, Monrovia, CA, USA, Radiance (American Orthodontics, Sheboygan, WI, USA, Mystique (GAC International Inc., Bohemia, NY, USA and Luxi II (Rocky Mountain Orthodontics, Denver, CO, USA. Chromatic changes were analyzed with the aid of a reflectance spectrophotometer and by visual inspection at five specific time intervals. Assessment periods were as received from the manufacturer (T0, 24 hours (T1, 72 hours (T2, as well as 7 days (T3 and 14 days (T4 of immersion in the aforementioned solutions. Results were submitted to statistical analysis with ANOVA and Bonferroni correction, as well as to a multivariate profile analysis for independent and paired samples with significance level set at 5%.RESULTS: The duration of the immersion period influenced color alteration of all tested brackets, even though these changes could not always be visually observed. Different behaviors were observed for each immersion solution; however, brackets immersed in one solution progressed similarly despite minor variations.CONCLUSIONS: Staining became more intense over time and all brackets underwent color alterations when immersed in the aforementioned solutions.

Solution of Schroedinger Equation for Two-Dimensional Complex Quartic Potentials

International Nuclear Information System (INIS)

Singh, Ram Mehar; Chand, Fakir; Mishra, S. C.

2009-01-01

We investigate the quasi-exact solutions of the Schroedinger wave equation for two-dimensional non-hermitian complex Hamiltonian systems within the frame work of an extended complex phase space characterized by x = x 1 + ip 3 , y = x 2 + ip 4 , p x = p 1 + ix 3 , p y = p 2 + ix 4 . Explicit expressions of the energy eigenvalues and the eigenfunctions for ground and first excited states for a complex quartic potential are obtained. Eigenvalue spectra of some variants of the complex quartic potential, including PT-symmetric one, are also worked out. (general)

Estimating the potential for solar thermal applications in the industrial process heat market 1990-2030

International Nuclear Information System (INIS)

Demeter, C.P.; Gray, E.E.; Carwile, C.

1991-01-01

This paper reports the results of a preliminary evaluation of the potential domestic market for solar thermal energy supply technologies matched to industrial process heat applications. The study estimates current and projects future industrial process heat demand to the year 2030 by two-digit standard industrial classification code for the manufacturing industrial sector and discusses the potential to displace conventional fossil fuel sources such as natural gas with alternative sources of supply. The PC Industrial Model, used by DOE's Energy Information Administration in support of the National Energy Strategy (NES) is used for forecast industrial energy demand. Demand is disaggregated by census region to account for geographic variations in solar insolation, and by heat medium and temperature to facilitate end-use matching with appropriate solar energy supply technologies. Levelized energy costs (LEC) are calculated for flat plate collectors for low- temperature preheat applications, parabolic troughs for intermediate temperature process steam and direct heat, and parabolic dish technologies for high-temperature, direct heat applications. LEC is also developed for a conventional natural gas-fueled Industrial Process Heat (IPH) supply source assuming natural gas price escalation consistent with NES forecasts to develop a relative figure of merit used in a market penetration model

The cogeneration potential of the sugar industry in Vietnam

International Nuclear Information System (INIS)

Bhattacharyya, S.C.; Thang, D.N.Q.

2004-01-01

Vietnam produces about 15 million tons of sugarcane per year and about five mt of bagasse. There is the potential for cogeneration using bagasse, which can also help overcome power shortages in the country. This paper analyses the potential for cogeneration from the sugar industry in Vietnam under three different scenarios and finds that between 100 and 300 megawatts of power-generating capacity could be supported by the bagasse generated from sugar mills, depending on the technology considered for sugar mills and cogeneration and the possibility of renovation of the existing mills. The paper also assesses the expense of cogeneration and finds it to be a cost-effective option for all types of sugar mill. It is found that the cost savings from cogeneration would more than offset the cost of introducing cogeneration in sugar mills with inefficient cane processing technologies. Sugar mills with modern technologies would have a significant amount of excess power and most of these plants would break-even if they sold excess power at around 4.5 cents per kilowatt hour. The break-even cost and the average production cost are sensitive to the investment cost assumptions. The paper thus suggests that cogeneration from the sugar industry is an attractive option for investors in existing mills or new sugar mills alike. (Author)

Biomethane potential of industrial paper wastes and investigation of the methanogenic communities involved.

Science.gov (United States)

Walter, Andreas; Silberberger, Sandra; Juárez, Marina Fernández-Delgado; Insam, Heribert; Franke-Whittle, Ingrid H

2016-01-01

Cellulose-containing waste products from the agricultural or industrial sector are potentially one of the largest sources of renewable energy on earth. In this study, the biomethane potential (BMP) of two types of industrial paper wastes, wood and pulp residues (WR and PR, respectively), were evaluated under both mesophilic and thermophilic conditions, and various pretreatment methods were applied in the attempt to increase the methane potential during anaerobic digestion. The methanogenic community composition was investigated with denaturing gradient gel electrophoresis (DGGE) and the ANAEROCHIP microarray, and dominant methanogens were quantitated using quantitative PCR. All pretreatments investigated in this study with the exception of the alkaline pretreatment of PR were found to increase the BMP of two paper industry wastes. However, the low recalcitrance level of the PR resulted in the pretreatments being less effective in increasing BMP when compared with those for WR. These results were supported by the physico-chemical data. A combined application of ultrasound and enzymatic pretreatment was found to be the best strategy for increasing methane yields. The retention time of substrates in the reactors strongly influenced the BMP of wastes subjected to the different pretreatments. In sludges from both paper wastes subjected to the various pretreatments, mixotrophic Methanosarcina species were found to dominate the community, accompanied by a consortium of hydrogenotrophic genera. Pretreating industrial paper wastes could be a potentially viable option for increasing the overall degradation efficiency and decreasing reactor retention time for the digestion of complex organic matter such as lignocellulose or hemicellulose. This would help reduce the environmental burden generated from paper production. Although there were minor differences in the methanogenic communities depending on the temperature of anaerobic digestion, there was little effect of substrate

Potential energy savings and CO2 emissions reduction of China's cement industry

International Nuclear Information System (INIS)

Ke, Jing; Zheng, Nina; Fridley, David; Price, Lynn; Zhou, Nan

2012-01-01

This study analyzes current energy and carbon dioxide (CO 2 ) emission trends in China's cement industry as the basis for modeling different levels of cement production and rates of efficiency improvement and carbon reduction in 2011–2030. Three cement output projections are developed based on analyses of historical production and physical and macroeconomic drivers. For each of these three production projections, energy savings and CO 2 emission reduction potentials are estimated in a best practice scenario and two continuous improvement scenarios relative to a frozen scenario. The results reveal the potential for cumulative final energy savings of 27.1 to 37.5 exajoules and energy-related direct emission reductions of 3.2 to 4.4 gigatonnes in 2011–2030 under the best practice scenarios. The continuous improvement scenarios produce cumulative final energy savings of 6.0 to 18.9 exajoules and reduce CO 2 emissions by 1.0 to 2.4 gigatonnes. This analysis highlights that increasing energy efficiency is the most important policy measure for reducing the cement industry's energy and emissions intensity, given the current state of the industry and the unlikelihood of significant carbon capture and storage before 2030. In addition, policies to reduce total cement production offer the most direct way of reducing total energy consumption and CO 2 emissions. - Highlights: ► This study models output and efficiency improvements in Chinese cement industry from 2011–2030. ► Energy savings and CO 2 emission reductions estimated for 3 scenarios relative to frozen scenario. ► Results reveal cumulative final energy savings potential of 27.1–37.5 EJ and 3.2–4.4 Gt CO 2 reductions. ► Increasing efficiency is the most important policy for reducing cement energy and emissions intensity.

On the existence of tunneling bounce solutions in piecewise linear potentials

Energy Technology Data Exchange (ETDEWEB)

Dutta, Koushik; Hector, Cecelie; Konstandin, Thomas; Vaudrevange, Pascal M.; Westphal, Alexander

2012-02-15

Coleman tunneling in a general scalar potential with two non-degenerate minima is known to have an approximation in terms of a piecewise linear triangular-shaped potential with sharp 'kinks' at the place of the local minima. This approximate potential has a regime where the existence of the bounce solution needs the scalar field to 'wait' for some amount of Euclidean time at one of the 'kinks'. We discuss under which circumstances the correct bounce action can be consistently obtained as the limiting case of a regular scalar potential where 'kinks' are resolved as locally smooth 'cap' regions. (orig.)

Industrial heritage and tourism: analysis of potentiality and motion for a circuit of industrial tourism in Barracas, Buenos Aires, Argentina

Directory of Open Access Journals (Sweden)

Aldo Guzman Ramos

2016-03-01

Full Text Available Argentina´s industrial development which started at the end of 19th  century and suffered a drop in 1970 decade has left numerous real state and private properties spread in the national territory. It`s feasible to use them through Industrial Tourism as a mechanism to economically and socially reactivate abandoned spaces and in crisis, but also as a way to revitalize their identity and culture recovering a part of their history. Exploratory and descriptive methodology implied a reconnaissance of industrial properties located in Barracas neighborhood from Ciudad de Buenos Aires, Argentina, applying variables to determine the state and touristic-recreational potentiality by means of Likert scale. As a result 68 places were selected and after utilizing the variables 24 sites remained, which were organized to prepare an Industrial Tourist Circuit that could complement Buenos Aires cultural offer.

Carbon emissions reduction potential in the US chemicals and pulp and paper industries by applying CHP technologies

International Nuclear Information System (INIS)

Khrushch, M.; Worrell, E.; Price, L.; Martin, N.; Einstein, D.

1999-01-01

The chemical and the pulp/paper industries combined provide 55% of CHP generation in the US industry. Yet, significant potential for new CHP capacities exists in both industries. From the present steam consumption data, the authors estimate about 50 GW of additional technical potential for CHP in both industries. The reduced carbon emissions will be equivalent to 44% of the present carbon emissions in these industries. They find that most of the carbon emissions reductions can be achieved at negative costs. Depending on the assumptions used in calculations, the economic potential of CHP in these industries can be significantly lower, and carbon emissions mitigation costs can be much higher. Using sensitivity analyses, they determine that the largest effect on the CHP estimate have the assumptions in the costs of CHP technology, in the assumed discount rates, in improvements in efficiency of CHP technologies, and in the CHP equipment depreciation periods. Changes in fuel and electricity prices and the growth in the industries' steam demand have less of an effect. They conclude that the lowest carbon mitigation costs are achieved with the CHP facility is operated by the utility and when industrial company that owns the CHP unit can sell extra electricity and steam to the open wholesale market. Based on the results of the analyses they discuss policy implications

Analysis of Petroleum Downstream Industry Potential in Riau Province

Directory of Open Access Journals (Sweden)

Tomi Erfando

2017-06-01

Full Text Available Petroleum downstream industry in Riau Province is still not optimal. The data shows that from 98,892,755 barrels lifting oil each year only 62,050,000 barrels could be processed in refinery unit II Dumai operated by PT Pertamina. There is a potential of 35-40% of downstream industry. Indonesian Government through The Ministry of Energy and Mineral Resources declared the construction of a mini refinery to boost oil processing output in the downstream sector. A feasibility study of development plan mini refinery is needed. The study includes production capacity analysis, product analysis, development & operational refinery  analysis and economic analysis. The results obtained by the mini refinery capacity is planned to process crude oil 6000 BOPD with the products produced are gasoline, kerosene, diesel and oil. Investment cost consist of is capital cost US $ 104419784 and operating cost US $ 13766734 each year with net profit earned US $ 12330063/year and rate of return from investment 11.63%

An Estimation of the Potential Utilization in Iranian Pharmaceutical Industry Involved in the Stock Exchange, 2008-2012

Science.gov (United States)

Annabi, Majid; Kebriaeezadeh, Abbas; Mohammadi, Timor; Marashi Shoshtari, Seyed Nasrolah; Abedin Dorkoosh, Farid; Pourreza, Abolghasem; Heydari, Hassan

2017-01-01

The aim of this study was to measure the potential of production and the capacity used in the pharmaceutical industry. Capacity use is the actual production rate to the potential output, which reflects the gap between actual production and production capacity. Through econometric methods, translog cost function in the short run along with functions of share cost of production factors is estimated through seemingly unrelated repeated regression (SURE) as a multivariate regression analysis provided by zeller. During the study the capacity used is decreasing. The capacity used, which calculated by weighted average, also decreased and the amount during the study period is much less than the simple average of the industry. Average capacity utilization in the industry over five years of study is equal to 57% while the average capacity used calculated by the weighted of industry average is 37%. To enhance the economic potential requires a proper use of resources, creation of favorable economic structure and productivity of the industry. Due to the large amount of unused capacity in the pharmaceutical industry there is no need to invest anymore unless in new grounds and it is obvious that more investment will change using capacity. PMID:29552074

An Estimation of the Potential Utilization in Iranian Pharmaceutical Industry Involved in the Stock Exchange, 2008-2012.

Science.gov (United States)

Annabi, Majid; Kebriaeezadeh, Abbas; Mohammadi, Timor; Marashi Shoshtari, Seyed Nasrolah; Abedin Dorkoosh, Farid; Pourreza, Abolghasem; Heydari, Hassan

2017-01-01

The aim of this study was to measure the potential of production and the capacity used in the pharmaceutical industry. Capacity use is the actual production rate to the potential output, which reflects the gap between actual production and production capacity . Through econometric methods, translog cost function in the short run along with functions of share cost of production factors is estimated through seemingly unrelated repeated regression (SURE) as a multivariate regression analysis provided by zeller. During the study the capacity used is decreasing. The capacity used, which calculated by weighted average, also decreased and the amount during the study period is much less than the simple average of the industry. Average capacity utilization in the industry over five years of study is equal to 57% while the average capacity used calculated by the weighted of industry average is 37%. To enhance the economic potential requires a proper use of resources, creation of favorable economic structure and productivity of the industry. Due to the large amount of unused capacity in the pharmaceutical industry there is no need to invest anymore unless in new grounds and it is obvious that more investment will change using capacity.

Potential Applications of Immobilized β-Galactosidase in Food Processing Industries

Directory of Open Access Journals (Sweden)

Parmjit S. Panesar

2010-01-01

Full Text Available The enzyme β-galactosidase can be obtained from a wide variety of sources such as microorganisms, plants, and animals. The use of β-galactosidase for the hydrolysis of lactose in milk and whey is one of the promising enzymatic applications in food and dairy processing industries. The enzyme can be used in either soluble or immobilized forms but the soluble enzyme can be used only for batch processes and the immobilized form has the advantage of being used in batch wise as well as in continuous operation. Immobilization has been found to be convenient method to make enzyme thermostable and to prevent the loss of enzyme activity. This review has been focused on the different types of techniques used for the immobilization of β-galactosidase and its potential applications in food industry.

Efficient use of energy: investment practice in industry; Effiziente Energienutzung: Investitionspraxis in der Industrie

Energy Technology Data Exchange (ETDEWEB)

Kuster, J. [BHP - Brugger, Hanser und Partner AG, Zuerich (Switzerland); Zweiacker, J.-F. [Rapp AG Ingenieure und Planer, Biel (Switzerland); Rosch, M. [Consulting Verfahrenstechnik, Allschwil (Switzerland)

2000-07-01

This report for the Swiss Federal Office of Energy (SFOE) presents the results of a study made on drying processes used in industry and possible ways of promoting investment in measures to increase the efficient use of energy. The energy consumption of dehydration and drying processes used in industry is examined and the savings potential for these processes estimated. Examples of the processes investigated are given and figures for the energy consumption for dehydration and drying processes in several different industrial sectors are quoted. The report then examines, on the one hand, the factors that hem innovations in this area and, on the other, those that promote them. Further, the report looks into which reasons are responsible for the realisation or non-realisation of technically and economically viable solutions for improving the energy-efficiency of the dehydration and drying processes.

Energy conservation potential in Taiwanese textile industry

International Nuclear Information System (INIS)

Hong, Gui-Bing; Su, Te-Li; Lee, Jenq-Daw; Hsu, Tsung-Chi; Chen, Hua-Wei

2010-01-01

Since Taiwan lacks sufficient self-produced energy, increasing energy efficiency and energy savings are essential aspects of Taiwan's energy policy. This work summarizes the energy savings implemented by 303 firms in Taiwan's textile industry from the on-line Energy Declaration System in 2008. It was found that the total implemented energy savings amounted to 46,074 ton of oil equivalent (TOE). The energy saving was equivalent to 94,614 MWh of electricity, 23,686 kl of fuel oil and 4887 ton of fuel coal. It represented a potential reduction of 143,669 ton in carbon dioxide emissions, equivalent to the annual carbon dioxide absorption capacity of a 3848 ha plantation forest. This study summarizes energy-saving measures for energy users and identifies the areas for making energy saving to provide an energy efficiency baseline.

Potential applications of process irradiation in Irish industry

International Nuclear Information System (INIS)

Upton, Mary

1985-01-01

Dr. Mary Upton draws attention to the U.S.A. Food and Drugs Administration agreement to allow irradiation for fresh fruit and vegetables of up to one kilogray and of spices up to 30 kilograys. There is also the likelihood of favourable legislation in the U.K. later this year. The potential for Irish industry may well lie in the extension of shelf-life of poultry, fish, fruit and vegetables; salmonella eradication; control of sprouting in potatoes and onions; treatment of food additives such as spices and enzymes; the replacement of ethylene oxide or of ethylene dibromide as preservatives, residues of which are currently considered somewhat suspect for health reasons

Life and health insurance industry investments in fast food.

Science.gov (United States)

Mohan, Arun V; McCormick, Danny; Woolhandler, Steffie; Himmelstein, David U; Boyd, J Wesley

2010-06-01

Previous research on health and life insurers' financial investments has highlighted the tension between profit maximization and the public good. We ascertained health and life insurance firms' holdings in the fast food industry, an industry that is increasingly understood to negatively impact public health. Insurers own $1.88 billion of stock in the 5 leading fast food companies. We argue that insurers ought to be held to a higher standard of corporate responsibility, and we offer potential solutions.

Analysis of the Industry Potential in Republic of Moldova

Directory of Open Access Journals (Sweden)

Larisa BUGAIAN

2010-12-01

Full Text Available This article identifies several competitive sectors of the economy that have potential to lead to sustainable economic growth for Republic of Moldova. Sectors were chosen for analysis combining quantitative and qualitative methods. A pool of sectors was selected based on export and sales performance over the last eight years. The final decision of the top sectors was based on the qualitative factors such as prevalence of the SMEs in the sector, gender makeup of the workforce and the regional presence, as well as employment levels and sales growth. The results of analysis showed that following industrial sectors: wine; textiles and apparel; information and communication technology; footwear; construction materials and furniture have the most potential for contributing to transformational growth in the Republic of Moldova economy.

One-parameter families of supersymmetric isospectral potentials from Riccati solutions in function composition form

Energy Technology Data Exchange (ETDEWEB)

Rosu, Haret C., E-mail: hcr@ipicyt.edu.mx [IPICYT, Instituto Potosino de Investigacion Cientifica y Tecnologica, Camino a la presa San José 2055, Col. Lomas 4a Sección, 78216 San Luis Potosí, S.L.P. (Mexico); Mancas, Stefan C., E-mail: mancass@erau.edu [Department of Mathematics, Embry–Riddle Aeronautical University, Daytona Beach, FL 32114-3900 (United States); Chen, Pisin, E-mail: pisinchen@phys.ntu.edu.tw [Leung Center for Cosmology and Particle Astrophysics (LeCosPA) and Department of Physics, National Taiwan University, Taipei 10617, Taiwan (China)

2014-04-15

In the context of supersymmetric quantum mechanics, we define a potential through a particular Riccati solution of the composition form (F∘f)(x)=F(f(x)) and obtain a generalized Mielnik construction of one-parameter isospectral potentials when we use the general Riccati solution. Some examples for special cases of F and f are given to illustrate the method. An interesting result is obtained in the case of a parametric double well potential generated by this method, for which it is shown that the parameter of the potential controls the heights of the localization probability in the two wells, and for certain values of the parameter the height of the localization probability can be higher in the smaller well. -- Highlights: •Function-composition generalization of parametric isospectral potentials is presented. •Mielnik one-parameter family of harmonic potentials is obtained as a particular case. •Graphical discussion of regular and singular regions in the parameter space is given.

Industrial hemp as a potential bioenergy crop in comparison with kenaf, switchgrass and biomass sorghum.

Science.gov (United States)

Das, Lalitendu; Liu, Enshi; Saeed, Areej; Williams, David W; Hu, Hongqiang; Li, Chenlin; Ray, Allison E; Shi, Jian

2017-11-01

This study takes combined field trial, lab experiment, and economic analysis approaches to evaluate the potential of industrial hemp in comparison with kenaf, switchgrass and biomass sorghum. Agronomy data suggest that the per hectare yield (5437kg) of industrial hemp stem alone was at a similar level with switchgrass and sorghum; while the hemp plants require reduced inputs. Field trial also showed that ∼1230kg/ha hemp grain can be harvested in addition to stems. Results show a predicted ethanol yield of ∼82gallons/dry ton hemp stems, which is comparable to the other three tested feedstocks. A comparative cost analysis indicates that industrial hemp could generate higher per hectare gross profit than the other crops if both hemp grains and biofuels from hemp stem were counted. These combined evaluation results demonstrate that industrial hemp has great potential to become a promising regional commodity crop for producing both biofuels and value-added products. Copyright © 2017 Elsevier Ltd. All rights reserved.

Exactly complete solutions of the Schroedinger equation with a spherically harmonic oscillatory ring-shaped potential

International Nuclear Information System (INIS)

Zhang Mincang; Sun Guohua; Dong Shihai

2010-01-01

A spherically harmonic oscillatory ring-shaped potential is proposed and its exactly complete solutions are presented by the Nikiforov-Uvarov method. The effect of the angle-dependent part on the radial solutions is discussed.

Industrial process water treatment and reuse: A framework for synthesis and design

DEFF Research Database (Denmark)

Quaglia, Alberto; Pennati, Alessandra; Bogataj, Milos

2014-01-01

Mathematical optimization has shown the potential to contribute to industrial water management, through the development of the solution methods needed for optimization-based design of wastewater treatment and reuse networks (also called water networks). Nevertheless, the application of this appro......, allowing a reduced water footprint, and the treatment costs are identified.......Mathematical optimization has shown the potential to contribute to industrial water management, through the development of the solution methods needed for optimization-based design of wastewater treatment and reuse networks (also called water networks). Nevertheless, the application...... algorithms. To this end, we propose a computer-aided framework for the design of water treatment and reuse networks. In the framework, optimization methods, problem analysis tools and wastewater engineering knowledge are integrated in a computer-aided environment, in order to facilitate the formulation...

Removal of Pb(II) ions from aqueous solution by a waste mud from copper mine industry: equilibrium, kinetic and thermodynamic study.

Science.gov (United States)

Ozdes, Duygu; Gundogdu, Ali; Kemer, Baris; Duran, Celal; Senturk, Hasan Basri; Soylak, Mustafa

2009-07-30

The objective of this study was to assess the adsorption potential of a waste mud (WM) for the removal of lead (Pb(II)) ions from aqueous solutions. The WM was activated with NaOH in order to increase its adsorption capacity. Adsorption studies were conducted in a batch system as a function of solution pH, contact time, initial Pb(II) concentration, activated-waste mud (a-WM) concentration, temperature, etc. Optimum pH was specified as 4.0. The adsorption kinetic studies indicated that the overall adsorption process was best described by pseudo-second-order kinetics. The equilibrium adsorption capacity of a-WM was obtained by using Langmuir and Freundlich isotherm models and both models fitted well. Adsorption capacity for Pb(II) was found to be 24.4 mg g(-1) for 10 g L(-1) of a-WM concentration. Thermodynamic parameters including the Gibbs free energy (Delta G degrees), enthalpy (Delta H degrees), and entropy (DeltaS degrees) indicated that the adsorption of Pb(II) ions on the a-WM was feasible, spontaneous and endothermic, at temperature range of 0-40 degrees C. Desorption studies were carried out successfully with diluted HCl solutions. The results indicate that a-WM can be used as an effective and no-cost adsorbent for the treatment of industrial wastewaters contaminated with Pb(II) ions.

Removal of Pb(II) ions from aqueous solution by a waste mud from copper mine industry: Equilibrium, kinetic and thermodynamic study

International Nuclear Information System (INIS)

Ozdes, Duygu; Gundogdu, Ali; Kemer, Baris; Duran, Celal; Senturk, Hasan Basri; Soylak, Mustafa

2009-01-01

The objective of this study was to assess the adsorption potential of a waste mud (WM) for the removal of lead (Pb(II)) ions from aqueous solutions. The WM was activated with NaOH in order to increase its adsorption capacity. Adsorption studies were conducted in a batch system as a function of solution pH, contact time, initial Pb(II) concentration, activated-waste mud (a-WM) concentration, temperature, etc. Optimum pH was specified as 4.0. The adsorption kinetic studies indicated that the overall adsorption process was best described by pseudo-second-order kinetics. The equilibrium adsorption capacity of a-WM was obtained by using Langmuir and Freundlich isotherm models and both models fitted well. Adsorption capacity for Pb(II) was found to be 24.4 mg g -1 for 10 g L -1 of a-WM concentration. Thermodynamic parameters including the Gibbs free energy (ΔG o ), enthalpy (ΔH o ), and entropy (ΔS o ) indicated that the adsorption of Pb(II) ions on the a-WM was feasible, spontaneous and endothermic, at temperature range of 0-40 o C. Desorption studies were carried out successfully with diluted HCl solutions. The results indicate that a-WM can be used as an effective and no-cost adsorbent for the treatment of industrial wastewaters contaminated with Pb(II) ions.

Removal of Pb(II) ions from aqueous solution by a waste mud from copper mine industry: Equilibrium, kinetic and thermodynamic study

Energy Technology Data Exchange (ETDEWEB)

Ozdes, Duygu; Gundogdu, Ali; Kemer, Baris; Duran, Celal; Senturk, Hasan Basri [Department of Chemistry, Karadeniz Technical University, Faculty of Arts and Sciences, 61080 Trabzon (Turkey); Soylak, Mustafa, E-mail: soylak@erciyes.edu.tr [Department of Chemistry, Erciyes University, Faculty of Arts and Sciences, 38039 Kayseri (Turkey)

2009-07-30

The objective of this study was to assess the adsorption potential of a waste mud (WM) for the removal of lead (Pb(II)) ions from aqueous solutions. The WM was activated with NaOH in order to increase its adsorption capacity. Adsorption studies were conducted in a batch system as a function of solution pH, contact time, initial Pb(II) concentration, activated-waste mud (a-WM) concentration, temperature, etc. Optimum pH was specified as 4.0. The adsorption kinetic studies indicated that the overall adsorption process was best described by pseudo-second-order kinetics. The equilibrium adsorption capacity of a-WM was obtained by using Langmuir and Freundlich isotherm models and both models fitted well. Adsorption capacity for Pb(II) was found to be 24.4 mg g{sup -1} for 10 g L{sup -1} of a-WM concentration. Thermodynamic parameters including the Gibbs free energy ({Delta}G{sup o}), enthalpy ({Delta}H{sup o}), and entropy ({Delta}S{sup o}) indicated that the adsorption of Pb(II) ions on the a-WM was feasible, spontaneous and endothermic, at temperature range of 0-40 {sup o}C. Desorption studies were carried out successfully with diluted HCl solutions. The results indicate that a-WM can be used as an effective and no-cost adsorbent for the treatment of industrial wastewaters contaminated with Pb(II) ions.

Potential radiological impact of the phosphate industry on wildlife

International Nuclear Information System (INIS)

Vandenhove, Hildegarde; Vives i Batlle, Jordi; Sweeck, Lieve

2015-01-01

The activities of the phosphate industry may lead to enhanced levels of naturally occurring radioactivity in terrestrial and aquatic ecosystems. We performed a preliminary environmental risk assessment (ERA) of environmental contamination resulting from the activities of 5 phosphate fertiliser plants (located in Belgium, Spain, Syria, Egypt, Brazil), a phosphate-mine and a phosphate-export platform in a harbour (both located in Syria). These sites were selected because of the availability of information on concentrations of naturally occurring radionuclides in the surrounding environments. Assessments were generally performed considering highest environmental concentrations reported in the studies. The ERICA Tool, operating in a Tier 2 assessment mode, was used to predict radiation dose rates and associated risk to the selected reference organisms using the ERICA default parameter setting. Reference organisms were those assigned as default by the ERICA Tool. Potential impact is expressed as a best estimate risk quotient (RQ) based on a radiation screening value of 10 μGy h −1 . If RQ ≤ 1, the environment is considered unlikely to be at risk and further radiological assessment is not deemed necessary. Except for one of the cases assessed, the best estimate RQ exceeded 1 for at least one of the reference organisms. Internal exposure covered for 90–100 % of the total dose. 226 Ra or 210 Po were generally the highest contributors to the dose. The aquatic ecosystems in the vicinity of the phosphate fertiliser plants in Tessenderlo (Belgium), Huelva (Spain), Goiás (Brazil) and the terrestrial environment around the phosphate mine in Palmyra (Syria) are the ecosystems predicted to be potentially most at risk. - Highlights: • The adjusted highlights Environmental radionuclide enrichment from P-industry warrants risk assessment. • 226 Ra and 210 Po are the most dose contributing radionuclides. • The total dose rate is strongly driven by the internal

Scenario analysis on CO2 emissions reduction potential in China's iron and steel industry

International Nuclear Information System (INIS)

Wang Ke; Wang Can; Lu Xuedu; Chen Jining

2007-01-01

The international climate community has begun to assess a range of possible options for strengthening the international climate change effort after 2012. Analysis of the potential for sector-based emissions reduction and relevant mitigation options will provide the necessary background information for the debate. In order to assess the CO 2 abatement potential of China's steel industry, a model was developed using LEAP software to generate 3 different CO 2 emission scenarios for the industry from 2000 to 2030. The abatement potentials of different scenarios were compared, and their respective feasibilities were assessed according to the cost information. High priority abatement measures were then identified. The results show that the average CO 2 abatement per year in the Recent Policy scenario and in the New Policy scenario, compared with the reference scenario, are 51 and 107 million tons, respectively. The corresponding total incremental costs are 9.34 and 80.95 billion dollars. It is concluded that there is great potential for CO 2 abatement in China's steel industry. Adjusting the structure of the industry and technological advancement will play an important role in emissions reduction. Successful implementation of current sustainable development policies and measures will result in CO 2 abatement at a low cost. However, to achieve higher levels of abatement, the cost will increase dramatically. In the near future, specific energy conservation technologies such as dry coke quenching, exhaust gas and heat recovery equipment will be of great significance. However, taking a long term perspective, emissions reduction will rely more on the adjustment of production processes and the application of more modern large scale plants. Advanced blast furnace technology will inevitably play an important role

Composite templates synthesis of mesoporous titania from industrial titanyl sulfate solution under external outfields

International Nuclear Information System (INIS)

Tian Congxue

2008-01-01

The precursors of mesoporous titania were synthesized via supra-molecular self-assembly route induced by composite templates (CTAB/P-123) from industrial titanyl sulfate solution under ultrasonic irradiation, microwave and hydrothermal condition. The hydrolysis and polycondensation rates of TiOSO 4 solution were controlled by adjusting the pH value at about 1.0. Mesoporous titania with anatase phase was obtained after templates removal by calcinations. The as-prepared powder was characterized by X-ray diffraction (XRD), N 2 isothermal adsorption-desorption, HRTEM and SAD. External outfields with enhancing polar action and soft hydrothermal condition were beneficial to prepare better mesoporous TiO 2 . Ultrasonic vibration promoted the formation of mesoporous structure. Under microwave irradiation, mesoporous TiO 2 was synthesized with BET specific surface area of 190.6 m 2 g -1 , average pore diameter of 2.57 nm and crystal size of 13.65 nm. And ultrasonic irradiation, microwave and hydrothermal conditions were making for forming and stabilizing the mesoporous structure

Institutional Analysis of Knowledge Generation Resource Potential at the Enterprises of Regional Military-Industrial Complex

Directory of Open Access Journals (Sweden)

Evgeny Vasilyevich Popov

2016-09-01

Full Text Available The article is devoted to the processes of knowledge generation at the enterprises of military-industrial complex, which are the leaders of the regional innovative activity. The target of the research is to develop the methodology based on the use of resource application potential for increasing the efficiency of knowledge generation at the instrument-making enterprises of military-industrial complex. The system analysis of the knowledge generation processes is conducted at one of them. It allows to draw a conclusion that such enterprises have a lack of the institutes of knowledge generation processes. The authors are offered a technique of the development of the knowledge generation system at the military-industrial enterprises based on the accounting of assets and opportunities of the enterprise in the realization of intellectual activity. The developed technique is based on the determination of the horizontal resource potential of knowledge generation and allows to determine the potential of resource application at each stage of product life cycle. The comparison of the actual and theoretical values of horizontal resource potential allows to correct the distribution of a share of each of resources within a stage, and therefore, to optimize the realization of tasks at a specific stage. The offered tools were implemented in 2015 at one of the regional military-Industrial enterprises. The methodological tools of the research include the methods of expert assessment, mathematical statistics and the institutional analysis. On the basis of the offered technique and received empirical results, the institutional spiral of knowledge generation during the filling of state order at the military-industrial enterprise is developed. Its implementation will promote the decrease in the level of uncertainty during the whole life cycle of innovative activity product. The developed institutional spiral of knowledge generation at instrument-making military-industrial

Exploiting biological activities of brown seaweed Ecklonia cava for potential industrial applications: a review.

Science.gov (United States)

Wijesinghe, W A J P; Jeon, You-Jin

2012-03-01

Seaweeds are rich in vitamins, minerals, dietary fibres, proteins, polysaccharides and various functional polyphenols. Many researchers have focused on brown algae as a potential source of bioactive materials in the past few decades. Ecklonia cava is a brown seaweed that is abundant in the subtidal regions of Jeju Island in the Republic of Korea. This seaweed attracted extensive interest due to its multiple biological activities. E. cava has been identified as a potential producer of wide spectrum of natural substances such as carotenoids, fucoidans and phlorotannins showing different biological activities in vital industrial applications including pharmaceutical, nutraceutical, cosmeceutical and functional food. This review focuses on biological activities of the brown seaweed E. cava based on latest research results, including antioxidant, anticoagulative, antimicrobial, antihuman immunodeficiency virus, anti-inflammatory, immunomodulatory, antimutagenic, antitumour and anticancer effects. The facts summarized here may provide novel insights into the functions of E. cava and its derivatives and potentially enable their use as functional ingredients in potential industrial applications.

A critical analysis of energy efficiency improvement potentials in Taiwan's cement industry

International Nuclear Information System (INIS)

Huang, Yun-Hsun; Chang, Yi-Lin; Fleiter, Tobias

2016-01-01

The cement industry is the second most energy-intensive sector in Taiwan, which underlines the need to understand its potential for energy efficiency improvement. A bottom-up model-based assessment is utilized to conduct a scenario analysis of energy saving opportunities up to the year 2035. The analysis is supported by detailed expert interviews in all cement plants of Taiwan. The simulation results reveal that by 2035, eighteen energy efficient technologies could result in 25% savings for electricity and 9% savings for fuels under the technical diffusion scenario. This potential totally amounts to about 5000 TJ/year, of which 91% can be implemented cost-effectively assuming a discount rate of 10%. Policy makers should support a fast diffusion of these technologies. Additionally, policy makers can tap further saving potentials. First, by decreasing the clinker share, which is currently regulated to a minimum of 95%. Second, by extending the prohibition to build new cement plants by allowing for replacement of existing capacity with new innovative plants in the coming years. Third, by supporting the use of alternative fuels, which is currently still a niche in Taiwan. - Highlights: •We analyze energy efficiency improvement potentials in Taiwan's cement industry. •Eighteen process-specific technologies are analyzed using a bottom-up model. •Our model systematically reflects the diffusion of technologies over time. •We find energy-saving potentials of 25% for electricity and 9% for fuels in 2035. •91% of the energy-saving potentials can be realized cost-effectively.

An Empirical Study on Marketing Prospecs and Potential of Steel Industry in India

OpenAIRE

Bagla, Varun

2008-01-01

In this dissertation, a sectoral review of the steel industry in India was taken into consideration. The emphasis was laid down in finding out to know the competitive advantages, which the large Indian Steel Companies have created overtime and their adaptation to the changing environment. I also analyzed the marketing potential and prospects of the steel industry in India. This study focuses on the two major companies in the steel sector in India, namely Steel authority of India ltd (SAIL) ...

Potential exposures in mobile industrial radiography

International Nuclear Information System (INIS)

Tauhata, L.; Leocadio, J.C.; Crispim, V.R.

2000-01-01

The radiation protection conditions of the mobile or open industrial radiography facilities were analyzed in the period from 1992 to 1996 to estimate the value of the potential exposure risk, the mean annual dose and the dose distribution function of the workers. To estimate the potential exposure the concepts described in ICRP 64 and Safety Series 104 were used. The annual mean value of abnormal events occurred in the operations of to remove and to retract the radioactive source of exposure device recorded in data bank of National Commission of Nuclear Energy (CNEN), in a period of 5 years, were used to obtain the risk value. To evaluate the worker exposures, data obtained by accompaniment the radiographic testing in 5 installations, representative of all radiographic facilities in Brazil and the data bank of CNEN were used. To obtain the statistical dose distribution data from individual monitoring of the workers of these installations were used, data from additional individual monitoring and data bank of CNEN. The absorbed mean dose value in the period from 1992 to 1996 maintained about 0.2 mSv/year like as in the period from 1990 to 1994, with a maximum value of 0.55 mSv/year in 1988. The statistical distribution in a period from January to December 1996, behavior likes as long-normal type. The estimated risk value for potential exposure was 4x10 -6 per year, in the period from 1992 to 96. Using the data bank of CNEN, in a period from 1976 to 1992, the estimate value was 6.6x10 -6 per year, using the same methodology. The comparison of the failed operation probability value of operator/device/local system, in a period from 1976 to 1992 and in 1996, shows an increasing of 0.5x10 -11 to 1.1x10 -11 per year, due mainly to the radiographic device and accessories become oldest, in spite of maintenance care. However, due to the radiation procedure improvements, the potential risk value reduced about 40%, that is from 6.6x10 6 to 4x10 -6 per year. (author)

Error Estimates for Approximate Solutions of the Riccati Equation with Real or Complex Potentials

Science.gov (United States)

Finster, Felix; Smoller, Joel

2010-09-01

A method is presented for obtaining rigorous error estimates for approximate solutions of the Riccati equation, with real or complex potentials. Our main tool is to derive invariant region estimates for complex solutions of the Riccati equation. We explain the general strategy for applying these estimates and illustrate the method in typical examples, where the approximate solutions are obtained by gluing together WKB and Airy solutions of corresponding one-dimensional Schrödinger equations. Our method is motivated by, and has applications to, the analysis of linear wave equations in the geometry of a rotating black hole.

Exoskeletons for industrial application and their potential effects on physical work load

NARCIS (Netherlands)

Looze, M.P. de; Bosch, T.; Krause, F.; Stadler, K.S.; O'Sullivan, L.W.

2016-01-01

The aim of this review was to provide an overview of assistive exoskeletons that have specifically been developed for industrial purposes and to assess the potential effect of these exoskeletons on reduction of physical loading on the body. The search resulted in 40 papers describing 26 different

CALS - what are the potentials for SME’s ?

DEFF Research Database (Denmark)

Bilberg, Arne; Thomsen, Finn Tang; Larsen, Michael Holm

1997-01-01

the potentials for improvingbusiness processes by effective information management. The threecompanies involved will demonstrate practical and innovativeapplications of CALS solutions, that will serve as examples for awide variety of SMEs. The paper will focus on the industrial results and the CALSengineering...

Size-dependent error of the density functional theory ionization potential in vacuum and solution.

Science.gov (United States)

Sosa Vazquez, Xochitl A; Isborn, Christine M

2015-12-28

Density functional theory is often the method of choice for modeling the energetics of large molecules and including explicit solvation effects. It is preferable to use a method that treats systems of different sizes and with different amounts of explicit solvent on equal footing. However, recent work suggests that approximate density functional theory has a size-dependent error in the computation of the ionization potential. We here investigate the lack of size-intensivity of the ionization potential computed with approximate density functionals in vacuum and solution. We show that local and semi-local approximations to exchange do not yield a constant ionization potential for an increasing number of identical isolated molecules in vacuum. Instead, as the number of molecules increases, the total energy required to ionize the system decreases. Rather surprisingly, we find that this is still the case in solution, whether using a polarizable continuum model or with explicit solvent that breaks the degeneracy of each solute, and we find that explicit solvent in the calculation can exacerbate the size-dependent delocalization error. We demonstrate that increasing the amount of exact exchange changes the character of the polarization of the solvent molecules; for small amounts of exact exchange the solvent molecules contribute a fraction of their electron density to the ionized electron, but for larger amounts of exact exchange they properly polarize in response to the cationic solute. In vacuum and explicit solvent, the ionization potential can be made size-intensive by optimally tuning a long-range corrected hybrid functional.

Potential Co-Generation of Electrical Energy from Mill Waste: A Case Study of the Malaysian Furniture Manufacturing Industry

Directory of Open Access Journals (Sweden)

Jegatheswaran Ratnasingam

2016-04-01

Full Text Available Furniture manufacturing in Malaysia is an established industry driven primarily by the availability of raw materials and labor. However, the industry suffers from the low-recovery rate of its materials, as it produces a substantial amount of waste during the manufacturing process. Although smaller waste fragments, or off-cuts, are recovered for other purposes, the splinters, shavings, and coarse dust have little economic value and are often discarded. Because wood is a well-established source of bioenergy, this study investigated the potential use of mill waste from the furniture-manufacturing industry for electrical energy generation. Waste from the rubberwood, bamboo, and rattan furniture industries was evaluated for its potential electrical energy generation, and the amount was compared with the electrical energy that was consumed by the furniture industry. The study also compared the emission of greenhouse gases from the combustion of these waste materials against fossil fuels used to generate electricity to assess its potential in terms of the environmental benefits. In conclusion, such mill waste could be utilized as substitute for fossil fuel to generate energy in the furniture industry.

Energy savings potential in China's industrial sector: From the perspectives of factor price distortion and allocative inefficiency

International Nuclear Information System (INIS)

Ouyang, Xiaoling; Sun, Chuanwang

2015-01-01

China's industrial energy consumption accounted for 70.82% of national and 14.12% of world energy usage in 2011. In the context of energy scarcity and environmental pollution, the industrial sector in China faces unsustainable growth problems. By adopting the stochastic frontier analysis (SFA) framework, this paper analyzes the factor allocative efficiency of China's industrial sector, and estimates the energy savings potential from the perspective of allocative inefficiency. This paper focuses on three issues. The first is examining the factor allocative inefficiency of China's industrial sector. The second is measuring factor price distortion by the shadow price model. The third is estimating the energy savings potential in China's industrial sector during 2001–2009. Major conclusions are thus drawn. First, factor prices of capital, labor and energy are distorted in China due to government regulations. Moreover, energy price is relatively low compared to capital price, while is relatively high compared to labor price. Second, the industry-wide energy savings potential resulted from energy allocative inefficiency was about 9.71% during 2001–2009. The downward trend of energy savings potential implies the increasing energy allocative efficiency in China's industrial sector. Third, a transparent and reasonable pricing mechanism is conducive to improving energy allocative efficiency. - Highlights: • We measure energy savings potential resulted from allocative inefficiency in China's industrial sector. • Allocative inefficiency is explained based on the theoretical and empirical models. • Factor prices of capital, labor and energy are distorted because of government regulations. • Energy pricing reform is conducive to improving energy allocative efficiency

Cubis AG - for the mining industry and for new markets

International Nuclear Information System (INIS)

Hamm, E.

1994-01-01

In Germany the research funds for the mining industry will again be cut drastically in future. Cubis must plan and use the remaining research funds in an optimum manner in conjunction with the mining industry itself and also the mining supply industry. Close cooperation and continuous coordination between the research institutes and industrial partners will continue to be necessary for this purpose. Transfer of technology between research and industrial application must take place more smoothly. It is not a question of marketing the implementation of results of individual research and development projects; on the contrary system solutions from one source are required and offered. Long-term business relationships with industrial partners, within the framework of which contract research, advice, engineering, training, etc. can be realised, are desirable. Cubis has undertaken the responsibility to make available services to the mining industry and involve itself in new markets with the released capacities. The success so far achieved by the new company shows that competence and potential to face up to the large tasks exist. Cubis is equipped to tackle the continuous challenge of technology and safety at work, but also the tasks in the raw material and environment sectors in the nineties and is the suitable partner for solution of problems. (orig.)

Molecular genetic improvements of cyanobacteria to enhance the industrial potential of the microbe: A review.

Science.gov (United States)

Johnson, Tylor J; Gibbons, Jaimie L; Gu, Liping; Zhou, Ruanbao; Gibbons, William R

2016-11-01

The rapid increase in worldwide population coupled with the increasing demand for fossil fuels has led to an increased urgency to develop sustainable sources of energy and chemicals from renewable resources. Using microorganisms to produce high-value chemicals and next-generation biofuels is one sustainable option and is the focus of much current research. Cyanobacteria are ideal platform organisms for chemical and biofuel production because they can be genetically engineered to produce a broad range of products directly from CO 2 , H 2 O, and sunlight, and require minimal nutrient inputs. The purpose of this review is to provide an overview on advances that have been or could be made to improve strains of cyanobacteria for industrial purposes. First, the benefits of using cyanobacteria as a platform for chemical and biofuel production are discussed. Next, an overview of cyanobacterial strain improvements by genetic engineering is provided. Finally, mutagenesis techniques to improve the industrial potential of cyanobacteria are described. Along with providing an overview on various areas of research that are currently being investigated to improve the industrial potential of cyanobacteria, this review aims to elucidate potential targets for future research involving cyanobacteria as an industrial microorganism. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:1357-1371, 2016. © 2016 American Institute of Chemical Engineers.

The Role of the Food Industry in Obesity Prevention.

Science.gov (United States)

Binks, Martin

2016-06-01

Obesity is a complex disease of diverse etiology. Among the potential influences in the development of obesity, the food supply chain remains an important influence. We provide a conceptual overview related to the food industry's role in obesity prevention. We first discuss some limitations of current public health efforts. We then describe how a model that attends to personal autonomy in the context of supportive policy intervention can empower individuals in their efforts to navigate the food supply chain. We then provide an evidence informed overview of key areas where continued efforts to collaboratively engage the food industry, through solution-focused dialogue and action, have the potential to contribute to obesity prevention. While challenging, appropriately transparent, well-governed public-private partnerships have the demonstrated potential to benefit the communities we serve.

Tuning coercive force by adjusting electric potential in solution processed Co/Pt(111) and the mechanism involved

Science.gov (United States)

Chang, Cheng-Hsun-Tony; Kuo, Wei-Hsu; Chang, Yu-Chieh; Tsay, Jyh-Shen; Yau, Shueh-Lin

2017-03-01

A combination of a solution process and the control of the electric potential for magnetism represents a new approach to operating spintronic devices with a highly controlled efficiency and lower power consumption with reduced production cost. As a paradigmatic example, we investigated Co/Pt(111) in the Bloch-wall regime. The depression in coercive force was detected by applying a negative electric potential in an electrolytic solution. The reversible control of coercive force by varying the electric potential within few hundred millivolts is demonstrated. By changing the electric potential in ferromagnetic layers with smaller thicknesses, the efficiency for controlling the tunable coercive force becomes higher. Assuming that the pinning domains are independent of the applied electric potential, an electric potential tuning-magnetic anisotropy energy model was derived and provided insights into our knowledge of the relation between the electric potential tuning coercive force and the thickness of the ferromagnetic layer. Based on the fact that the coercive force can be tuned by changing the electric potential using a solution process, we developed a novel concept of electric-potential-tuned magnetic recording, resulting in a stable recording media with a high degree of writing ability.

Solutions for the disposal of industrial and rain wastewater of transport enterprises in Moscow

Directory of Open Access Journals (Sweden)

Varyushina Galina

2018-01-01

Full Text Available The article gives results of the surveys water management systems, auto repair companies, bus compamies, taxis, fleets of trucks, production and technical enterprises. Studied technological processes of primary production: cleaning engines, flushing of radiators and parts of batteries, testing of fuel tanks, cleaning of parts and units, exterior washing and painting of motor vehicles. There were carried out field examinations of local industrial wastewater treatment facilities industrial wastewater and onsite construction runoff, the laboratory-production work to identify quantitative and qualitative indicators of the incoming and treated effluents, including petroleum products, suspended matter, salinity, synthetic surfactants, heavy metals etc. Proposed sustainable solutions for the improvement of the work of treatment facilities of rain sewage by mechanical and physical and chemical methods, including horizontal sand catchers, septic tanks – oil separator, a cascade of pressure filters with granular mineral over-loading and high-performance sorption materials, the effectiveness of treatment meets the requirements of water for its re-use for technical needs, and discharge to water bodies.

Potentials for the production of industrial basic material from native tuber crops and perspectives for their utilization

Energy Technology Data Exchange (ETDEWEB)

Schittenhelm, S.; Dambroth, M.

1984-01-01

In the present paper the potentials of native tuber crops for the production of raw material for the industry are discussed and the first results presented. The following points are especially important: Based on their high yield potential the potato and the Jerusalem artichoke are especially valuable as industrial crops. First breeding results with potato show that improvements in tuber yield, which are necessary for a better competitive ability are possible. To what extent hybrids between our cultivated potato and different primitive forms can be used as industrial potatoes has to be tested. In order to reduce production input the resistance against nematodes and lade blight is most important for the production of basic populations of potatoes for industrial purposes. The succes of breeding Jerusalem artichoke depends on solving the problems of bad seed set.

Offshore industry: medical emergency response in the offshore oil and gas industry.

Science.gov (United States)

Ponsonby, Will; Mika, Frano; Irons, Greg

2009-08-01

The hunt for oil and gas has taken workers into new more distant locations including those offshore. The remoteness of the offshore platforms and vessels coupled with the potential risk of being cut off by bad weather presents particular challenges for medical emergency response (MER). Firstly to define the challenges for MER in terms of locations, population and epidemiology of injuries and illnesses in the offshore environment. Secondly to give examples of legal requirements and industry standards to manage MER. Thirdly to look at existing and emerging practice to manage these challenges. A review of published literature was supplemented with a summary of current practice in the industry. Medical professionals (medics) working offshore on installations and vessels are primarily responsible for the medical care of the workers. The medics have clinics with suitable medical equipment for managing emergencies as well as providing limited primary care. Some countries have legislation that stipulate minimum requirements. Where there is no national legislation, industry and company guidance is used to define the MER standards. Supervision of the offshore medics is often provided by doctors on shore via radio and phone links. These methods of communication are now being augmented with more sophisticated telemedicine solutions such as the Internet and live video links. These newer solutions allow for prompt high-quality care and provide the scope for a variety of new treatment options to be available for the offshore workforce.

Solution coating of large-area organic semiconductor thin films with aligned single-crystalline domains

KAUST Repository

Diao, Ying; Tee, Benjamin C-K.; Giri, Gaurav; Xu, Jie; Kim, Do Hwan; Becerril, Hector A.; Stoltenberg, Randall M.; Lee, Tae Hoon; Xue, Gi; Mannsfeld, Stefan C. B.; Bao, Zhenan

2013-01-01

Solution coating of organic semiconductors offers great potential for achieving low-cost manufacturing of large-area and flexible electronics. However, the rapid coating speed needed for industrial-scale production poses challenges to the control

Industrial treatment of solutions of fission products. Separation of caesium-137; Traitement industriel de solutions de produits de fission. Separation du cesium-137

Energy Technology Data Exchange (ETDEWEB)

Fisher, C; Raggenbass, A [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1959-07-01

Two types of chemical treatment can be considered for the manufacture of solid sources for industrial uses from fission product solutions remaining after plutonium extraction: a) concentration of the solution and preparation of solid sources from the bulk material, without separation, b) separation of one or several fission products from which the sources are made. Examination of the radio-chemical composition of the mixture of fission products that will be available from the Marcoule reactors (G1, G2 and G3) shows that caesium-137 accounts for 30 per cent of the {gamma} energy available immediately after the plutonium separation, 70 per cent two years after and 100 per cent after five years. There is practically no advantage in making sources from bulk fission products, since the separation of caesium-137 is no more complicated and yet it results in a material with more potential uses. The separation of caesium-137 by a method based on the standard phospho-tungstate precipitation method has been considered. Previously, the precipitated caesium phospho-tungstate was dissolved and caesium was recovered from the solution by cation-exchange or by removal of phosphate and tungstate ions by anion-exchange. A study has now been made, of the metathesis of caesium phospho-tungstate to barium phosphate and tungstate by the action of barium hydroxide, the caesium being obtained in solution as the hydroxide. The advantages of this new procedure are: - greater decontamination of caesium-137 without further purification, - possibility of direct transformation to caesium sulphate, - general simplification of the procedure and, consequently, of the equipment. (author) [French] Deux types de traitement chimique peuvent etre envisages pour amener a l'etat de sources solides utilisables industriellement les produits de fission contenus dans les solutions residuaires de l'extraction du plutonium. Ces traitements sont les suivants: a) concentration des solutions et confection de

Industrial treatment of solutions of fission products. Separation of caesium-137; Traitement industriel de solutions de produits de fission. Separation du cesium-137

Energy Technology Data Exchange (ETDEWEB)

Fisher, C.; Raggenbass, A. [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1959-07-01

Two types of chemical treatment can be considered for the manufacture of solid sources for industrial uses from fission product solutions remaining after plutonium extraction: a) concentration of the solution and preparation of solid sources from the bulk material, without separation, b) separation of one or several fission products from which the sources are made. Examination of the radio-chemical composition of the mixture of fission products that will be available from the Marcoule reactors (G1, G2 and G3) shows that caesium-137 accounts for 30 per cent of the {gamma} energy available immediately after the plutonium separation, 70 per cent two years after and 100 per cent after five years. There is practically no advantage in making sources from bulk fission products, since the separation of caesium-137 is no more complicated and yet it results in a material with more potential uses. The separation of caesium-137 by a method based on the standard phospho-tungstate precipitation method has been considered. Previously, the precipitated caesium phospho-tungstate was dissolved and caesium was recovered from the solution by cation-exchange or by removal of phosphate and tungstate ions by anion-exchange. A study has now been made, of the metathesis of caesium phospho-tungstate to barium phosphate and tungstate by the action of barium hydroxide, the caesium being obtained in solution as the hydroxide. The advantages of this new procedure are: - greater decontamination of caesium-137 without further purification, - possibility of direct transformation to caesium sulphate, - general simplification of the procedure and, consequently, of the equipment. (author) [French] Deux types de traitement chimique peuvent etre envisages pour amener a l'etat de sources solides utilisables industriellement les produits de fission contenus dans les solutions residuaires de l'extraction du plutonium. Ces traitements sont les suivants: a) concentration des solutions et

PFEM-based modeling of industrial granular flows

Science.gov (United States)

Cante, J.; Dávalos, C.; Hernández, J. A.; Oliver, J.; Jonsén, P.; Gustafsson, G.; Häggblad, H.-Å.

2014-05-01

The potential of numerical methods for the solution and optimization of industrial granular flows problems is widely accepted by the industries of this field, the challenge being to promote effectively their industrial practice. In this paper, we attempt to make an exploratory step in this regard by using a numerical model based on continuous mechanics and on the so-called Particle Finite Element Method (PFEM). This goal is achieved by focusing two specific industrial applications in mining industry and pellet manufacturing: silo discharge and calculation of power draw in tumbling mills. Both examples are representative of variations on the granular material mechanical response—varying from a stagnant configuration to a flow condition. The silo discharge is validated using the experimental data, collected on a full-scale flat bottomed cylindrical silo. The simulation is conducted with the aim of characterizing and understanding the correlation between flow patterns and pressures for concentric discharges. In the second example, the potential of PFEM as a numerical tool to track the positions of the particles inside the drum is analyzed. Pressures and wall pressures distribution are also studied. The power draw is also computed and validated against experiments in which the power is plotted in terms of the rotational speed of the drum.

Industrial Waste Heat Recovery - Potential Applications, Available Technologies and Crosscutting R&D Opportunities

Energy Technology Data Exchange (ETDEWEB)

Thekdi, Arvind [E3M Inc, North Potomac, MD (United States); Nimbalkar, Sachin U. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2015-01-01

The purpose of this report was to explore key areas and characteristics of industrial waste heat and its generation, barriers to waste heat recovery and use, and potential research and development (R&D) opportunities. The report also provides an overview of technologies and systems currently available for waste heat recovery and discusses the issues or barriers for each. Also included is information on emerging technologies under development or at various stages of demonstrations, and R&D opportunities cross-walked by various temperature ranges, technology areas, and energy-intensive process industries.

Solution of the Fokker-Planck equation with a logarithmic potential and mixed eigenvalue spectrum

Science.gov (United States)

Guarnieri, F.; Moon, W.; Wettlaufer, J. S.

2017-09-01

Motivated by a problem in climate dynamics, we investigate the solution of a Bessel-like process with a negative constant drift, described by a Fokker-Planck equation with a potential V (x ) =-[b ln(x ) +a x ] , for b >0 and a finance. The Bessel-like process we consider can be solved by seeking solutions through an expansion into a complete set of eigenfunctions. The associated imaginary-time Schrödinger equation exhibits a mix of discrete and continuous eigenvalue spectra, corresponding to the quantum Coulomb potential describing the bound states of the hydrogen atom. We present a technique to evaluate the normalization factor of the continuous spectrum of eigenfunctions that relies solely upon their asymptotic behavior. We demonstrate the technique by solving the Brownian motion problem and the Bessel process both with a constant negative drift. We conclude with a comparison to other analytical methods and with numerical solutions.

A continuing program for technology transfer to the apparel industry

Science.gov (United States)

Clingman, W. H.

1971-01-01

A six month program has been carried out to investigate various mechanisms for transferring technology to industry. This program has focused on transfer to the apparel industry through the Apparel Research Foundation. The procedure was to analyze the problem, obtain potentially relevant aerospace technology, and then transfer this technology to the industry organization. This was done in a specific case. Technology was identified relevant to stitchless joining, and this technology was transferred to the Apparel Research Foundation. The feasibility and ground rules for carrying out such activities on a broader scale were established. A specific objective was to transfer new technology from the industry organization to the industry itself. This required the establishment of an application engineering program. Another transfer mechanism tested was publication of solutions to industry problems in a format familiar to the industry. This is to be distinguished from circulating descriptions of new technology. Focus is on the industry problem and the manager is given a formula for solving it that he can follow. It was concluded that this mechanism can complement the problem statement approach to technology transfer. It is useful in achieving transfer when a large amount of application engineering is not necessary. A wide audience is immediately exposed to the technology. On the other hand, the major manufacturing problems which require a sophisticated technical solution integrating many innovations are less likely to be helped.

Comprehensive Approach to Energy and Environment in the EcoCare Program for Design, Engineering and Operation of Siemens Industry Solutions

DEFF Research Database (Denmark)

Wegener, Dieter; Finkbeiner, Matthias; Geiger, Dieter

2009-01-01

This paper intends to describe the outline of the Eco Care Program (ECP) at the Siemens-Division Industry Solutions and its implementation. ECP aims to embrace and to coordinate main activities within the product lifecycle management (PLM) process considering both economic targets in terms...

The industrial potential of herbs and spices - a mini review.

Science.gov (United States)

Leja, Katarzyna B; Czaczyk, Katarzyna

2016-01-01

Herbs and spices have been used for food and medicinal purposes for centuries - the first recorded evidence of their use dates back to 1500BC and the Ebers Papyrus, which mentioned spices such as anise, mustard, saffron, cinnamon, and cassia. Now, in the 21st century, a variety of secondary compounds produced by plants are used in many fields of industry, such as food production (to improve taste, to provide vitamins and macro- and microelements, and also to inhibit food spoilage caused by foodborne bacteria), in medicine (in the treatment of various diseases; in chemoprevention and cancer therapy; as a source of natural antimicrobials for the treatment of infectious disease), and in pharmacology and cosmetology (in dietary supplements, and as a result of the demand for preservative-free cosmetics, to reduce the risk of methylparaben allergies). The aim of this review is to present the major active compounds in herbs and spices and explore their potential applications in industry.

Nuclear industry powering up to tackle potential threats from cyberspace

International Nuclear Information System (INIS)

Shepherd, John

2015-01-01

In June 2015, the International Atomic Energy Agency (IAEA), in cooperation with international agencies including the crime-fighting organisation Interpol, will host a major conference on the protection of computer systems and networks that support operations at the world's nuclear facilities. According to the IAEA, the use of computers and other digital electronic equipment in physical protection systems at nuclear facilities, as well as in facility safety systems, instrumentation, information processing and communication, ''continues to grow and presents an ever more likely target for cyber-attack''. The international nuclear industry is right to take heed of ever-evolving security threats, deal with them accordingly, and be as open and transparent as security allows about what is being done, which will reassure the general public. However, the potential menace of cyberspace should not be allowed to become such a distraction that it gives those who are ideologically opposed to nuclear another stick with which to beat the industry.

Nuclear industry powering up to tackle potential threats from cyberspace

Energy Technology Data Exchange (ETDEWEB)

Shepherd, John [nuclear 24, Brighton (United Kingdom)

2015-06-15

In June 2015, the International Atomic Energy Agency (IAEA), in cooperation with international agencies including the crime-fighting organisation Interpol, will host a major conference on the protection of computer systems and networks that support operations at the world's nuclear facilities. According to the IAEA, the use of computers and other digital electronic equipment in physical protection systems at nuclear facilities, as well as in facility safety systems, instrumentation, information processing and communication, ''continues to grow and presents an ever more likely target for cyber-attack''. The international nuclear industry is right to take heed of ever-evolving security threats, deal with them accordingly, and be as open and transparent as security allows about what is being done, which will reassure the general public. However, the potential menace of cyberspace should not be allowed to become such a distraction that it gives those who are ideologically opposed to nuclear another stick with which to beat the industry.

Potential of dyes as draw solutions in forward osmosis for the South ...

African Journals Online (AJOL)

Forward osmosis (FO) technology has gained substantial interest as a possible lower-energy desalination technology. However, challenges such as the availability of effective draw solutions (DS) have limited its implementation. This study evaluated alternative feed water resources and assessed the potential of dye ...

Priority listing of industrial processes by total energy consumption and potential for savings. Final report

Energy Technology Data Exchange (ETDEWEB)

Streb, A.J.

1977-01-01

A survey of eight of the most energy-intensive segments of the U.S. industry is made to quantify the energy consumed in the principal process units, to identify areas in which significant improvement appear possible, and to rank the process units in terms of total energy consumption and the potential for improvement. Data on the steel, paper, aluminum, textile, cement, and glass industries, petroleum refineries, and olefins and derivative products industries were compiled to help plan the development of new energy sources and to provide targets for energy conservation activities. (MCW)

Sorption Potentials of Waste Tyre for Some Heavy Metals (Pb Cd in Aqueous Solution

Directory of Open Access Journals (Sweden)

Austin Kanayo ASIAGWU

2009-07-01

Full Text Available An investigation into the adsorption potential of activated and inactivated waste tyre powders for some heavy metals (Pb2+ and Cd2+ in their aqueous solution has been studied. The result indicated that inactivated waste tyre is a good non-conventional adsorbent for the removal of Cd from aqueous solution. A total of 93.3% of Cadmium contents was removed. The inactivated waste type proved a good adsorbent for the removal of Pb2+ 5g of 500mm activated tyre removed over 86.66% of Pb2+ from solution.

Exact solutions for the quintic nonlinear Schroedinger equation with time and space modulated nonlinearities and potentials

International Nuclear Information System (INIS)

Belmonte-Beitia, Juan; Calvo, Gabriel F.

2009-01-01

In this Letter, by means of similarity transformations, we construct explicit solutions to the quintic nonlinear Schroedinger equation with potentials and nonlinearities depending both on time and on the spatial coordinates. We present the general approach and use it to study some examples and find nontrivial explicit solutions such as periodic (breathers), quasiperiodic and bright and dark soliton solutions

Neural network potential for Al-Mg-Si alloys

Science.gov (United States)

Kobayashi, Ryo; Giofré, Daniele; Junge, Till; Ceriotti, Michele; Curtin, William A.

2017-10-01

The 6000 series Al alloys, which include a few percent of Mg and Si, are important in automotive and aviation industries because of their low weight, as compared to steels, and the fact their strength can be greatly improved through engineered precipitation. To enable atomistic-level simulations of both the processing and performance of this important alloy system, a neural network (NN) potential for the ternary Al-Mg-Si has been created. Training of the NN uses an extensive database of properties computed using first-principles density functional theory, including complex precipitate phases in this alloy. The NN potential accurately reproduces most of the pure Al properties relevant to the mechanical behavior as well as heat of solution, solute-solute, and solute-vacancy interaction energies, and formation energies of small solute clusters and precipitates that are required for modeling the early stage of precipitation and mechanical strengthening. This success not only enables future detailed studies of Al-Mg-Si but also highlights the ability of NN methods to generate useful potentials in complex alloy systems.

Potential recovery of industrial wood and energy wood raw material in different cutting and climate scenarios for Finland

International Nuclear Information System (INIS)

Kaerkkaeinen, Leena; Nuutinen, Tuula; Matala, Juho; Kellomaeki, Seppo; Haerkoenen, Kari

2008-01-01

The aim of this study was to estimate the simultaneous recovery of industrial wood and raw material for energy wood from cuttings in Finland during the next 50 years. Two cutting scenarios (maximum and sustainable cuttings) and two climate scenarios (current and changing climate) were analysed to determine their impacts on harvesting potential. The analysis was carried out using sample plot and tree data from the ninth National Forest Inventory and a management-oriented large-scale forestry model (MELA) into which the transfer functions based on physiological modelling were incorporated to describe the impacts of climate change. Depending on the climate scenario, the volume of potential recovery of industrial wood in the maximum cutting scenario during the period 2003-2013 varied from 103 to 105 million m 3 a -1 , while the amount of potential energy wood raw material was 35 Tg a -1 . During the period 2043-2053, in the current climate scenario, the potential recovery of industrial wood was 64 million m 3 a -1 and energy wood raw material 22 Tg a -1 , and in the changing climate scenario, 85 million m 3 a -1 and 29 Tg a -1 , respectively. In the sustainable cutting scenario, depending on the climate scenario used, the potential recovery of industrial wood during the period 2003-2013 varied from 74 to 76 million m 3 a -1 , while the amount of potential energy wood was 25 Tg a -1 . During the period 2043-2053, in the current climate scenario, the potential recovery of industrial wood was 80 million m 3 a -1 and energy wood raw material 26 Tg a -1 , and in the changing climate scenario, 88 million m 3 a -1 and 29 Tg a -1 , respectively. (author)

Design in new industrial contexts

DEFF Research Database (Denmark)

Morelli, Nicola

2005-01-01

The output of industrial process is becoming more and more complex as a result of saturation of markets and the fine segmentation of the demand, which follows the multiplication of needs, lifestyles and behaviours. Services addressing such needs, are replacing material products as an object...... of exchange in modern markets. This context is addressing industrial production towards new models, characterised by highly personalised and localised solutions, to be developed by a network of actors, rather than a single company. New solution oriented partnerships (SOP) need to be created, involving...... and localised solutions should be expressed according to an industrial logic. The cooperation, within the production system of companies, local actors and even users may address this problem, however the industrialisation of such solutions is a methodological approach that has not yet generated an appropriate...

Education-industry partnership: the chemical industry experience

International Nuclear Information System (INIS)

Bricknell, D.J.

1994-01-01

The European Chemical Industry and the Nuclear Power Industry share similar problems and hopefully can share similar solutions to them. A recent survey of public opinion conducted on behalf of the chemical industry has shown that the general public knows little about the industry and does not trust it to behave responsibly. The industry is responding in two ways: firstly to demonstrate that it is a responsible member of the community by operating to the highest safety and environmental standards and by being open in its dealings with the public on such matters. Secondly the industry is working with the education system to ensure that the public has the opportunity to gain a good education in science, is able to make rational judgments about risks and benefits and is better able to understand and accept the role of the chemical industry in society

Reduction of mercury from mackerel fillet using combined solution of cysteine, EDTA, and sodium chloride.

Science.gov (United States)

Hajeb, P; Jinap, S

2012-06-13

An acidic solution containing mercury chelating agents to eliminate mercury in raw fish (mackerel) fillet was developed. The solution contained hydrochloric acid, sodium hydroxide, cysteine, EDTA, and NaCl. The optimum conditions for mercury reduction were achieved using response surface methodology (RSM) at cysteine concentration of 1.25%, EDTA of 275 mg/L, NaCl of 0.5%, pH of 3.75, and exposure time of 18 min. The optimized conditions produced a solution which can remove up to 91% mercury from raw fish fillet. Cysteine and EDTA were identified as potential chelating agents with the greatest potential for use. The solution can be employed in fish industries to reduce mercury in highly contaminated fish.

Demonstration of TEG-powered wireless autonomous transducer solution for condition monitoring in industrial environment

Energy Technology Data Exchange (ETDEWEB)

Wang, Ziyang; Patrascu, Mihai; Su, Jiale; Vullers, Ruud J.M. [imec the Netherlands, Eindhoven (Netherlands)

2011-07-01

Imec/Holst Centre focuses on the development of wireless autonomous transducer solution, which is poised to bring about huge impact in the sectors of health care, machinery, transportation and energy, etc. In this paper, we first showcase a TEG-powered demonstration for condition monitoring in industrial environment. Composing of sensor-actuator, front-end interface, digital signal processing unit and radio, the developed wireless sensor node can monitor the changing operating condition, i.e. the loading on a rolling-element bearing, on a rotating shaft. The use of a specially designed TEG, working in tandem with an energy storage device, can significantly improve the energy autonomy of the condition monitoring system as a whole. The different components in the demonstration are presented. Subsequently, the experimental results of vibration signature analysis are exhibited. On one hand, the presented demonstration sheds light on the huge potential of thermoelectric energy harvesting to achieve energy autonomy. On the other hand, it also points to the aspects that are in need of further development, namely miniaturization and cost reduction of energy harvesters. Aimed at the delivery of cost-effective miniaturized thermoelectric harvesting devices, imec/Holst Centre has been tackling with the relevant challenges by resorting to, but not limited to, its expertise in micromachining. An update on the latest research results is subsequently given with regard to various micromachined thermoelectric devices, fully fledged wearable TEGs with custom designed package and thermoelectric material property optimization. (orig.)

Assessment of Energy Efficiency Improvement and CO2 Emission Reduction Potentials in India's Cement Industry

Energy Technology Data Exchange (ETDEWEB)

Morrow, III, William R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hasanbeigi, Ali [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Xu, Tengfang [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2012-12-03

India’s cement industry is the second largest in the world behind China with annual cement production of 168 Mt in 2010 which accounted for slightly greater than six percent of the world’s annual cement production in the same year. To produce that amount of cement, the industry consumed roughly 700 PJ of fuel and 14.7 TWh of electricity. We identified and analyzed 22 energy efficiency technologies and measures applicable to the processes in the Indian cement industry. The Conservation Supply Curve (CSC) used in this study is an analytical tool that captures both the engineering and the economic perspectives of energy conservation. Using a bottom-up electricity CSC model and compared to an electricity price forecast the cumulative cost-effective plant-level electricity savings potential for the Indian cement industry for 2010- 2030 is estimated to be 83 TWh, and the cumulative plant-level technical electricity saving potential is 89 TWh during the same period. The grid-level CO2 emissions reduction associated with cost-effective electricity savings is 82 Mt CO2 and the electric grid-level CO2 emission reduction associated with technical electricity saving potential is 88 Mt CO2. Compared to a fuel price forecast, an estimated cumulative cost-effective fuel savings potential of 1,029 PJ with associated CO2 emission reduction of 97 Mt CO2 during 2010-2030 is possible. In addition, a sensitivity analysis with respect to the discount rate used is conducted to assess the effect of changes in this parameter on the results. The result of this study gives a comprehensive and easy to understand perspective to the Indian cement industry and policy makers about the energy efficiency potential and its associated cost over the next twenty years.

Potentiality of uranium biosorption from nitric acid solutions using shrimp shells.

Science.gov (United States)

Ahmed, S H; El Sheikh, E M; Morsy, A M A

2014-08-01

Biosorption has gained important credibility during recent years because of its good performance and low cost. This work is concerned with studying the potentiality of the chitin component of the shrimp shells for uranium biosorption from nitric acid liquid solutions. The structural characteristics of the working chitin have been determined via Fourier Transform Infrared Spectroscopy (FTIR). The surface morphology was examined using Scanning Electron Microscopy (SEM). The adsorption capacity of biomass was investigated experimentally. The influence of contact time, pH, metal ion concentration, solution volume to mass ratio and temperature were evaluated and the results were fitted using adsorption isotherm models. The kinetic of uranium biosorption was also investigated as well as biosorption thermodynamic. Copyright © 2014 Elsevier Ltd. All rights reserved.

Human performance improvement in organizations: Potential application for the nuclear industry

International Nuclear Information System (INIS)

2005-11-01

This publication is primarily intended for managers and specialists in nuclear facility operating organizations working in the area of human performance improvement. It is intended to provide them with practical information they can use to improve human performance in their organizations. While some of the information provided in this publication is based upon the experience of nuclear facility operating organizations, most of it comes from human performance improvement initiatives in non-nuclear organizations and industries. The nuclear industry has a long tradition of sharing good management practices in order to foster continuous improvement. However, it is not always realized that many of the practices that are now well established initially came from non-nuclear industries and were subsequently adapted for application to nuclear power plant operating organizations. There is, therefore, good reason to periodically review non-nuclear industry practices for ideas that might have direct or indirect application to the nuclear industry in order to potentially gain benefits such as the following: new approaches to certain problem areas, insights into new or impending challenges, improvements in existing practices, benchmarking of opportunities, development of learning organizations and avoidance of collective blind spots. The preparation of this report was an activity of the project on Effective Training to Achieve Excellence in the Performance of NPP Personnel. The objective of this project is to enhance the capability of Member States to utilize proven practices developed and transferred by the IAEA for improving personnel performance. The expected outcome from this project is the increased use by organizations in Members States of proven engineering and management practices and methodologies developed and transferred by the IAEA to improve personnel performance

Self-Similar Solutions of Variable-Coefficient Cubic-Quintic Nonlinear Schroedinger Equation with an External Potential

International Nuclear Information System (INIS)

Wu Hongyu; Fei Jinxi; Zheng Chunlong

2010-01-01

An improved homogeneous balance principle and an F-expansion technique are used to construct exact self-similar solutions to the cubic-quintic nonlinear Schroedinger equation. Such solutions exist under certain conditions, and impose constraints on the functions describing dispersion, nonlinearity, and the external potential. Some simple self-similar waves are presented. (general)

Radioactive waste industrial management in France for medium- and long-term

International Nuclear Information System (INIS)

Lavie, J.-M.

1981-01-01

The context within which the industrial scale management of radioactive wastes takes place is briefly outlined. The regulations already in force or envisaged in France in this field are exposed. Emphasis is given to the activities of the National Agency for the management of radioactive wastes (ANDRA). The reasons why this organization was created are discussed together with the type of work conferred to it, its present workload, the industrial management concepts it applies, its present and future potential, the costs envisaged for waste disposal and the financial solutions adopted. The industrial technical assistance policy of ANDRA is presented [fr

Potentiality of the Usage of Compressed Natural Gas for Competitiveness in Service Delivery Industries

Directory of Open Access Journals (Sweden)

Gazi Mohammad Hasan Jamil

2014-08-01

Full Text Available Abstract. With the rising costs of gasoline, many vehicle owners are looking for alternatives of it. Compressed natural gas (CNG has been tested for this very purpose in some countries and found as a better alternative so far. CNG comes from country’s natural resources and it is clean and less costly to use. This paper is mainly an analysis of the potential benefits of using natural gas as a transportation fuel by the service delivery industries. It will examine CNG’s potential contribution in reducing delivery and vehicle maintenance cost, saving money in the long run projects, improving fuel efficiency, enhancing physical safety and assuring environment friendly emissions of carbon monoxide or reactive gases for the service delivery industries.Keywords: Compressed natural gas (CNG, Service Delivery, Fossil fuel, Global warming, Competitiveness

The development of Bio-pharmaceutical industry in China: problems and solutions.

Science.gov (United States)

Yan, Gujun

2014-07-01

Known as the "sunrise industry" of the 21st century, bio-pharmaceutical industry has been a fast-growing global industry, and many countries have been developing this industry as the focus of their national economies. In China, there exists a huge market demand for the development of bio-pharmaceutical industry, but at the present stage the industry is faced with some problems, such as low level of R & D for innovative drugs, and inappropriate capital investment in the industrialization. In order to accelerate the development of China's bio-pharmaceutical industry, it is necessary to take strategic initiatives of improving the technology transfer system, developing the bio-pharmaceutical outsourcing, and building a diversified industrial financing system.

Status of domestic uranium industry

International Nuclear Information System (INIS)

Chenoweth, W.L.

1989-01-01

The domestic uranium industry continues to operate at a reduced level, due to low prices and increased foreign competition. For four years (1984-1987) the Secretary of Energy declared the industry to be nonviable. A similar declaration is expected for 1988. Exploration and development drilling, at the rate of 2 million ft/year, continue in areas of producing mines and recent discoveries, especially in northwestern Arizona, northwestern Nebraska, south Texas, Wyoming, and the Paradox basin of Colorado and Utah. Production of uranium concentrate continues at a rate of 13 to 15 million lb of uranium oxide (U 3 O 8 ) per year. Conventional mining in New Mexico, Arizona, Utah, Colorado, Wyoming, and Texas accounts for approximately 55% of the production. The remaining 45% comes from solution (in situ) mining, from mine water recovery, and as by-products from copper production and the manufacture of phosphoric acid. Solution mining is an important technique in Wyoming, Nebraska, and Texas. By-product production comes from phosphate plants in Florida and Louisiana and a copper mine in Utah. Unmined deposits in areas such as the Grants, New Mexico, district are being investigated for their application to solution mining technology. The discovered uranium resources in the US are quite large, and the potential to discover additional resources is excellent. However, higher prices and a strong market will be necessary for their exploitation

Mapping industrial networks as an approach to identify inter-organisational collaborative potential in new product development

DEFF Research Database (Denmark)

Parraguez, Pedro; Maier, Anja

2012-01-01

. Consequently, identifying and selecting potential partners to establish collaboration agreements can be a key activity in the new product development process. This paper explores the implications of mapping industrial networks with the purpose of identifying inter-organisational collaborative potential...

Potential Challenges Faced by the U.S. Chemicals Industry under a Carbon Policy

Directory of Open Access Journals (Sweden)

Andrea Bassi

2009-09-01

Full Text Available Chemicals have become the backbone of manufacturing within industrialized economies. Being energy-intensive materials to produce, this sector is threatened by policies aimed at combating and adapting to climate change. This study examines the worst-case scenario for the U.S. chemicals industry when a medium CO2 price policy is employed. After examining possible industry responses, the study goes on to identify and provide a preliminary evaluation of potential opportunities to mitigate these impacts. If climate regulations are applied only in the United States, and no action is taken to invest in advanced low- and no-carbon technologies to mitigate the impacts of rising energy costs, the examination shows that climate policies that put a price on carbon could have substantial impacts on the competiveness of the U.S. chemicals industry over the next two decades. In the long run, there exist technologies that are available to enable the chemicals sector to achieve sufficient efficiency gains to offset and manage the additional energy costs arising from a climate policy.

Interprovincial regulatory barriers to procurement in western Canada's oil and gas sector : potential standardization-based solutions : final report

International Nuclear Information System (INIS)

Hawkins, R.; Godin, M.; Josty, P.

2008-01-01

This study reviewed the regulatory environment related to the oil and gas industry in western Canada in order to identify factors limiting the procurement of goods and services required by the industry. The aim of the study was to identify solutions based on the development of voluntary industry standards. Literature and reports related to interprovincial trade and standards were reviewed. The procurement divisions of oil and gas companies and suppliers to the oil and gas industry were consulted in addition to government official and industry experts. A review of provincial technical regulations was completed. The study identified 3 candidates for specific action within the standards system: (1) modular transport platforms; (2) regulatory conformance procedures; and (3) the mobility of skilled workers. Results of the study indicated that the development of service standards for technical and inspection activities of importance to the petroleum industry will help to facilitate the increased mobility of skilled workers, while initiatives to develop a standard information disclosure and exchange format for all federal, provincial and territorial jurisdictions will address the conflicting regimes to which oil and gas products and services are subjected. 40 refs., 5 tabs.

Waste-heat recovery potential in Turkish textile industry. Case study for city of Bursa

Energy Technology Data Exchange (ETDEWEB)

Pulat, E.; Etemoglu, A.B.; Can, M. [Uludag University, Faculty of Engineering and Architecture, Mechanical Engineering Department, Gorukle, TR-16059, Bursa (Turkey)

2009-04-15

Textile sector of Turkey has a large production capacity and it is one of the important sectors. Many industrial heating processes generate waste energy in textile industry. Therefore, there is a tremendous waste-heat potential to utilize in textile applications. This study assesses the potential of waste-heat obtained from particularly dyeing process at textile industry in Bursa where textile center of Turkey. Energy consumptions could be decreased by using of waste-heat recovery systems (WHRSs). A thermodynamic analysis is performed in this study. An exergy-based approach is performed for optimizing the effective working conditions for WHRSs with water-to-water shell and tube heat exchanger. The payback period is found to be less than 6 months. The variations of the parameters which affect the system performance such as waste-water inlet temperature, mass flow rate, cooling water inlet pressure and dead state conditions are examined respectively. The results of the analysis show that the exergy destruction rate and economical profit increase with increasing of mass flow rate of the waste water. Similarly, exergy destruction rate, effectiveness and economical profit increase while the second law efficiency decreases as the waste-water inlet temperature increases. (author)

Costs and potentials of energy conservation in China's coal-fired power industry: A bottom-up approach considering price uncertainties

International Nuclear Information System (INIS)

Chen, Hao; Kang, Jia-Ning; Liao, Hua; Tang, Bao-Jun; Wei, Yi-Ming

2017-01-01

Energy conservation technologies in the coal-fired power sector are important solutions for the environmental pollution and climate change issues. However, a unified framework for estimating their costs and potentials is still needed due to the wide technology choices, especially considering their economic feasibility under fuel and carbon price uncertainties. Therefore, this study has employed a bottom-up approach to analyze the costs and potentials of 32 key technologies’ new promotions during the 13th Five-Year Plan period (2016–2020), which combines the conservation supply curve (CSC) approach and break-even analysis. Findings show that (1) these 32 technologies have a total coal conservation potential of 275.77 Mt with a cost of 238.82 billion yuan, and their break-even coal price is 866 yuan/ton. (2) steam-water circulation system has the largest energy conservation potential in the coal-fired power industry. (3) considering the co-benefits will facilitate these technologies’ promotions, because their break-even coal prices will decrease by 2.35 yuan/ton when the carbon prices increase by 1 yuan/ton. (4) discount rates have the largest impacts on the technologies’ cost-effectiveness, while the future generation level affect their energy conservation potentials most. - Highlights: • The 32 technologies can save 275.77 Mt coal with a cost of 238.82 billion yuan. • The steam-water circulation system has the largest energy conservation potential. • Considering the co-benefits will facilitate the technology promotions • Discount rates have the largest impacts on the technologies’ cost-effectiveness.

Contact structures in the poultry industry in Great Britain: Exploring transmission routes for a potential avian influenza virus epidemic

Directory of Open Access Journals (Sweden)

Hyder Kieran

2008-07-01

Full Text Available Abstract Background The commercial poultry industry in United Kingdom (UK is worth an estimated £3.4 billion at retail value, producing over 174 million birds for consumption per year. An epidemic of any poultry disease with high mortality or which is zoonotic, such as avian influenza virus (AIV, would result in the culling of significant numbers of birds, as seen in the Netherlands in 2003 and Italy in 2000. Such an epidemic would cost the UK government millions of pounds in compensation costs, with further economic losses through reduction of international and UK consumption of British poultry. In order to better inform policy advisers and makers on the potential for a large epidemic in GB, we investigate the role that interactions amongst premises within the British commercial poultry industry could play in promoting an AIV epidemic, given an introduction of the virus in a specific part of poultry industry in Great Britain (GB. Results Poultry premises using multiple slaughterhouses lead to a large number of premises being potentially connected, with the resultant potential for large and sometimes widespread epidemics. Catching companies can also potentially link a large proportion of the poultry population. Critical to this is the maximum distance traveled by catching companies between premises and whether or not between-species transmission could occur within individual premises. Premises closely linked by proximity may result in connections being formed between different species and or sectors within the industry. Conclusion Even quite well-contained epidemics have the potential for geographically widespread dissemination, potentially resulting in severe logistical problems for epidemic control, and with economic impact on a large part of the country. Premises sending birds to multiple slaughterhouses or housing multiple species may act as a bridge between otherwise separate sectors of the industry, resulting in the potential for large

Solute-matrix and Solute-Solute Interactions during Supercritical Fluid Extraction of Sea Buckthorn Leaves

Czech Academy of Sciences Publication Activity Database

Sajfrtová, Marie; Sovová, Helena

2012-01-01

Roč. 42, SI (2012), s. 1682-1691 E-ISSN 1877-7058. [International Congress of Chemical and Process Engineering CHISA 2012 and 15th Conference PRES 2012 /20./. Prague, 25.08.2012-29.08.2012] R&D Projects: GA TA ČR TA01010578 Institutional support: RVO:67985858 Keywords : supercritical fluid extraction * sea buckthom leaves * solute-solute interaction Subject RIV: CI - Industrial Chemistry, Chemical Engineering

Towards an Industrial Manufactured Morphing Trailing Edge Flap System for Wind Turbines

DEFF Research Database (Denmark)

Aagaard Madsen, Helge; Løgstrup Andersen, Tom; Bergami, Leonardo

2014-01-01

Several numerical studies in the past 10 years have shown big potentials for load reduction on MW turbines using distributed control for alleviation of the fluctuating loads along the blade span. However, the requirements by the wind turbine industry of robust actuator solutions where the stronge...

Climate policy instruments and industry-effects and potential responses in the Swedish context

International Nuclear Information System (INIS)

Johansson, Bengt

2006-01-01

Efficient policy instruments for reducing the emission of greenhouse gases are essential for the realisation of a successful climate policy. General economic policy instruments have the potential for providing efficient emission reduction as they equalise marginal costs for emission reduction between different actors. They also provide incentives for a great variety of responses such as energy efficiency improvements, fuel substitution and reduced consumption of carbon intensive products. However, as a result of the fact that it has so far been impossible to implement policy instruments on a global scale, these instruments are often adapted in such a way that some of their potential advantages are eliminated. In this paper the possibility of different policy instruments to contribute to reductions in industrial CO 2 emissions, while preserving the competitiveness of industry, is evaluated theoretically. The consequences of increasing the cost of CO 2 emission in various industrial sectors are also discussed. Attention is directed towards carbon taxes, emission trading (ET), and regulation. CO 2 taxes without tax reductions and ET with allocation through auctioning have theoretical advantages in a global climate regime but may lead to significant disadvantages if implemented in a single or a small groups of countries. ET with free intensity-based allocation would in this case have a major advantage in combining incentives for emission reductions through efficiency improvements and fuel substitution, with little impact on production levels

Hs solutions for nonlinear Schrodinger equations with potentials superquadratic at infinity

International Nuclear Information System (INIS)

Zhang Guoping; Yajima, Kenji; Liu Fengshan

2006-01-01

In this Letter we study the initial value problem for the nonlinear Schrodinger equation with the potential V superquadratic at infinity. With the local smoothing property and Strichartz inequality obtained by the authors, we prove the existence and the uniqueness of the solution for H s -valued initial data and fractional s by combining the L 2 boundedness theory of pseudo differential operators and the fractional derivatives estimate

Uncertainty in the Sphere of the Industry 4.0 – Potential Areas to Research

Directory of Open Access Journals (Sweden)

Andrzej Magruk

2016-12-01

Full Text Available The world stands on the threshold of a new age of technology, which will launch a fourth industrial revolution (Industry 4.0. According to this idea, web-based network will support smart factories at every stage of the work on the product, from design through to servicing and recycling. It is a vision of a world in which the real environment connects to the digital one using follows driving forces: Internet of things, cloud computing, big data, cyber-physical systems, and others. The Industry 4.0 concept is based on developing smart chains preparation based on communicating with each other means of production, products, components, plants, humans. Established in Germany, the concept of Industry 4.0, is the brainchild – its beginning reaches 2011. It is therefore fraught with high level of uncertainty in many aspects (economic, social, technological, legal, etc.. The main aim of this article is to analyze different dimensions of uncertainty regarding the Industry 4.0, both in terms of opportunities and threats. Due to the freshness of the topic and the great complexity of the Industry 4.0 phenomenon, the main aim of the article is to identify potential areas requiring the necessary research in order minimizing negative – today uncertain – effects occurring in both the design concept Industry 4.0 as well as during its functioning.

Potential and cost-effectiveness of CO{sub 2}-reducing measures in the pulp and paper industry

Energy Technology Data Exchange (ETDEWEB)

Moellersten, K.; Westermark, M.; Yan, J. [Royal Institute of Technology (KTH), Stockholm (Sweden). Dept. of Chemical Engineering and Technology/Energy Processes

2001-07-01

Using the two criteria of potential CO{sub 2} reduction and cost of CO{sub 2} reduction several technical options in the pulp and paper industry are investigated. Principal CO{sub 2} reducing measures include: decreasing fuel consumption through improved heat exchanging or new processes with lower heat demand, decreasing electricity consumption, substituting fossil fuels with biofuels, exporting refined biofuels for external use, increasing CO{sub 2} neutral electricity generation, improving waste heat utilization and decreasing specific raw material consumption. The results show that electricity conservation and improvement of existing steam power cycles are the most cost-effective options that have a large potential to reduce CO{sub 2} emissions. Outsourcing of industrial energy operations to utilities may enable CO{sub 2} reducing measures that would not be carried out by industry due to differences in demands for profit on spent capita. 21 refs., 1 fig., 2 tabs.

Optical fibre sensing: a solution for industry

Science.gov (United States)

Sun, T.; Fabian, M.; Chen, Y.; Vidakovic, M.; Javdani, S.; Grattan, K. T. V.; Carlton, J.; Gerada, C.; Brun, L.

2017-04-01

Optical fibres have been explored widely for their sensing capability to meet increasing industrial needs, building on their success in telecommunications. This paper provides a review of research activities at City University of London in response to industrial challenges through the development of a range of fibre Bragg grating (FBG)-based sensors for transportation structural monitoring. For marine propellers, arrays of FBGs mapped onto the surface of propeller blades allow for capturing vibrational modes, with reference to simulation data. The research funded by EU Cleansky programme enables the development of self-sensing electric motor drives to support `More Electric Aircraft' concept. The partnership with Faiveley Brecknell Willis in the UK enables the integration of FBG sensors into the railway current-collecting pantographs for real-time condition monitoring when they are operating under 25kV conditions.

Achieving the economic potential for industrial cogeneration in Ontario: A financial perspective on electric utility policy

International Nuclear Information System (INIS)

Diemer, S.G.; Cain, S.R.

1993-01-01

The impact of private vs public ownership regimes on the magnitude of achievable industrial cogeneration capacity in Ontario is assessed. Estimates of technical and economic potential are presented for several industrial subsectors and heat demand categories, showing that nearly all of the technically feasible 7,600 MW is also economically efficient given a value of power of at least 4 cents/kWh in 1991 dollars. Using financial data and investment criteria specific to the two forms of ownership, the project evaluation model points to a significantly larger quantum of financial (achievable) potential with public rather than private development of industrial cogeneration. At avoided costs and associated buyback rates of 4 and 5 cents/kWh, the achievable cogeneration capacities are ca 2,400 and 7,600 MW under public ownership and 132 and 3,000 MW under private ownership. Ratepayer savings are significant: the full economic potential can be achieved through public ownership at a buyback rate of 5 cents/kWh; under private ownership, a comparable capacity requires a 6 cents buyback rate, reflecting additional ratepayer costs of nearly $600 million annually. 1 fig., 4 tabs

Water in the Mendoza, Argentina, food processing industry: water requirements and reuse potential of industrial effluents in agriculture

Directory of Open Access Journals (Sweden)

Alicia Elena Duek

2016-04-01

Full Text Available This paper estimates the volume of water used by the Mendoza food processing industry considering different water efficiency scenarios. The potential for using food processing industry effluents for irrigation is also assessed. The methodology relies upon information collected from interviews with qualified informants from different organizations and food-processing plants in Mendoza selected from a targeted sample. Scenarios were developed using local and international secondary information sources. The results show that food processing plants in Mendoza use 19.65 hm3 of water per year; efficient water management practices would make it possible to reduce water use by 64%, i.e., to 7.11 hm3. At present, 70% of the water is used by the fruit and vegetable processing industry, 16% by wineries, 8% by mineral water bottling plants, and the remaining 6% by olive oil, beer and soft drink plants. The volume of effluents from the food processing plants in Mendoza has been estimated at 16.27 hm3 per year. Despite the seasonal variations of these effluents, and the high sodium concentration and electrical conductivity of some of them, it is possible to use them for irrigation purposes. However, because of these variables and their environmental impact, land treatment is required.

Burden of industrial waste and potential for recycling: technological, economic and environmental aspects

Directory of Open Access Journals (Sweden)

Mihajlović Ivan

2017-07-01

Full Text Available Many benefits resulting from the development of the heavy industry are, unfortunately, accompanied by many issues resulting from the process of generating the industrial waste. This manuscript is presenting the environmental consequences, resulting from long period of time of heavy industry production and exploring the possibilities to recycle some of the industrial waste generated during the period of more than one century of ore excavation and copper extraction in the region of Eastern Serbia, in the vicinity of city of Bor. First part of the manuscript is presenting the scope of environmental issues, resulting from the heavy industry in this region and the amounts and the structure of the industrial waste, generated in this area, as well as the influence of generated waste to the environment of the region. Second part of the manuscript is dealing with the potential to recycle and reuse some of this waste, analyzing technological, economic and environmental aspects at the same time. In the final segment of the paper, some practical examples will be addressed based on the research work conducted at both experimental and industrial level. Results presented in the manuscript are mostly collected during long term research of the project team from Technical faculty in Bor, University of Belgrade, in the field of environmental management. This way, this manuscript is based on review of the research papers authored or co-authored by the author of this work, dealing with water, soil and air pollution, published in leading international journals. Also, the manuscript is presenting the literature review of other international issues dealing with the environmental management issues in the vicinity of large industrial complexes. Parts of the research results, presented in this manuscript are financially supported by the Ministry of Education, Science and Technological development of Republic of Serbia, under the project TR34023.

Pequi: a Brazilian fruit with potential uses for the fat industry

Directory of Open Access Journals (Sweden)

Guedes Andréa Madalena Maciel

2017-09-01

Full Text Available Pequi is a native fruit from Brazil, found in the Amazon, Caatinga, Cerrado and Atlantic Rain Forest regions. It is one of the main plants with great potential for sustainable use in Central Brazil. Among 16 species comprising Caryocar genus, three are highlighted: C. brasiliense, C. villosum, and C. coriaceum, of economic importance for families in small communities of Brazilian Cerrado. They are generally organized in cooperatives and use the leaves for preparing medicinal extracts, and the fruits for culinary purposes. When the sale of fresh fruits is reduced, they produce and commercialize fruit preserves, and liqueur products, as well as extract the oil. Harvesting of mature fruits after falling from the tree while keeping some fruits at the plant is the best way for its sustainable production. The internal mesocarp contains from 36 to 66% dry weight of oil having traditional culinary, medicinal and cosmetic uses. This oil has 60% of oleic acid and 35% palmitic acid, thus suitable for industrial fat hardstocks. The presence of the triacylglycerols POO and POP makes the oil of interest for cosmetic and food industries. Both pulp and kernel oils have been studied for their health effects. By physical, enzymatic or chemical modification, the oil has shown potential uses as cocoa butter substitute and zero trans fat product.

Approximate analytical solutions of Klein-Gordon equation with Hulthen potentials for nonzero angular momentum

International Nuclear Information System (INIS)

Chen Changyuan; Sun Dongsheng; Lu Falin

2007-01-01

Using the exponential function transformation approach along with an approximation for the centrifugal potential, the radial Klein-Gordon equation with the vector and scalar Hulthen potential is transformed to a hypergeometric differential equation. The approximate analytical solutions of bound states are attained for different l. The analytical energy equation and the unnormalized radial wave functions expressed in terms of hypergeometric polynomials are given

A MULTI-OBJECTIVE APPROACH TO THE EVALUATION OF INNOVATIVE POTENTIAL OF THE TOURISM INDUSTRY ORGANIZATIONS

Directory of Open Access Journals (Sweden)

Tat’yana Pavlovna Levchenko

2018-02-01

Full Text Available Speaking about innovation in the tourism industry and hotel business, in particular, it usually means events of a systemic nature, with quality novelty, aimed at achieving positive changes, stable functioning and dynamic development. Along with general economic factors that determine the uneven demand for services of hospitality, it is explained by the sharp increase in dependence of their tourism and recreational opportunities from innovative potential (IP, capability of adapting to challenging competitive environment. The article considers a multi-objective approach to the study of the innovative potential of the tourism industry organizations. Its essence lies in the fact that the choice of the structural elements from the point of view of their value and importance (in any combination cannot be established a priori, without sufficient objective analysis on some of the more important criteria for achieving the goals. A diagnostic analysis and evaluation of the innovation potential of several hotel organizations from the standpoint of a multi-purpose approach is performed.

Determining the potential volume of industrial process steam to be generated in nuclear facilities

International Nuclear Information System (INIS)

Jobsky, T.

1990-01-01

The present study serves to determine the market potential of nuclear energy for industrial process steam supply according to branches and sites in the Federal Republic of Germany (excluding the new East German Laender). On the nuclear plant side two HTR reference plants with different unit powers of 200 MWth (HTR-Modul) and 100 MWth are investigated. An essential result in analysing the nuclear market potential is the finding that the number of potential users and sites will triple if smaller unit sizes were introduced. This corresponds to an increase in nuclear plant potential from 28 units of 200 MWth each to 91 units of 100 MWth on the assumptions made in this study. A comparison of economic efficiency between fossil-fired power production plants and the HTR-Modul shows the competitiveness of nuclear process steam and electricity production in the base load range. A single-site evaluation for the centres of energy demand competes conceptually with a combined heat supply by nuclear long-distance energy. This integrated supply concept makes it possible to supply considerably more industrial companies with process steam while reducing the number of sites, since the heat requirements of smaller sites can also be covered by the integrated system. (orig.) [de

Requirements analysis and data model design for the development of vertical ERP solutions for the ceramic industry

International Nuclear Information System (INIS)

Oltra-Badenes, R. F.; Gil-Gomez, H.; Bellver-Lopez, R.; Asensio-Cuenta, S.

2013-01-01

Currently, the existing information systems, and specifically the ERP, can not give adequate support to the management of manufacturing companies of ceramic tile, because, among other reasons, not to contemplate the existence of tone, size and quality within the same product. This feature, caused by the lack of homogeneity of the product (LHP), generates various problems in managing the product through the different business processes, such as, stocks management, order management, the production management, etc. Thus, it is necessary to develop an ERP solution that is able to manage adequately the ceramic product, including tone, size and quality. In this paper we analyze the requirements of the ceramic sector, in terms of product identification, and propose a data model to meet these requirements. The model arises as a basic guide for the development of vertical ERP solutions tailored to the ceramic industry. (Author)

Economic factor environmental protection. Productivity of the German environmental and climate protection industry in international competition; Wirtschaftsfaktor Umweltschutz. Leistungsfaehigkeit der deutschen Umwelt- und Klimaschutzwirtschaft im internationalen Vergleich

Energy Technology Data Exchange (ETDEWEB)

Legler, Harald; Krawczyk, Olaf [Niedersaechsisches Institut fuer Wirtschaftsforschung (NIW), Hannover (Germany); Walz, Rainer; Eichhammer, Wolfgang; Frietsch, Rainer [Fraunhofer Institut fuer System- und Innovationsforschung (ISI), Karlsruhe (Germany)

2006-05-15

The analysis on the economic factor environment and the German environmental industry on international competition is faced to methodological limits, since the environmental industry does not present itself as an homogeneous sector. The study is organized in the following chapters: introduction - the importance of environmental industry; classification of environmental and climate protection industry; productivity volume and production structure; international competition for potential environmental protection products; environmental protection industry and innovative performance. Integrated environmental solutions are of increasing significance, avoiding emissions and products and production process from beginning on. All known forecast indicate an expansive market development. In addition the rising prices for crude oil may push the search for innovative solutions to substitute fossil energy sources. The environmental industry should look for globally transferable solutions in order to promote global sustainable growth.

Industrial garnet

Science.gov (United States)

Olson, D.W.

2000-01-01

The state of the global industrial garnet industry in 1999 is discussed. Industrial garnet mined in the U.S., which accounts for approximately one-third of the world's total, is usually a solid-solution of almandine and pyrope. The U.S. is the largest consumer of industrial garnet, using an estimated 47,800 st in 1999 as an abrasive and as a filtration medium in the petroleum industry, filtration plants, aircraft and motor vehicle manufacture, shipbuilding, wood furniture finishing operations, electronic component manufacture, ceramics manufacture, and glass production. Prices for crude concentrates ranged from approximately $50 to $110/st and refined garnet from $50 to $215/st in 1999, depending on type, source, quantity purchased, quality, and application.

Durian Husk as Potential Source for Particleboard Industry

Science.gov (United States)

Zddin, Z.; Risby, M. S.

2010-03-01

The main purpose of this study is to develop low cost particleboards using durian skin as its reinforcing materials. Mechanical characterizations such as tensile, compressive and flexural strength were investigated. The fibers were extracted through the traditional retting and also mechanized process to compare the fibers production output. Surface topology study using Scanning Electron Microscope was done to examine the surface texture of the produced fibers, as shown in Figure 1. The experimental investigation reveals that the addition of these fibers reduces the mechanical properties of the composite specimen. However it can be concluded that this composite satisfies the basic requirement of non-load bearing construction materials, and they could be used for partition walls and the like. Thus, the potential for development, therefore, seems to be very promising. Finally, apart from saving energy consumption for the building, the proposed materials offer an alternative option to dispose waste of fruit industry.

Durian Husk as Potential Source for Particleboard Industry

International Nuclear Information System (INIS)

Zddin, Z.; Risby, M. S.

2010-01-01

The main purpose of this study is to develop low cost particleboards using durian skin as its reinforcing materials. Mechanical characterizations such as tensile, compressive and flexural strength were investigated. The fibers were extracted through the traditional retting and also mechanized process to compare the fibers production output. Surface topology study using Scanning Electron Microscope was done to examine the surface texture of the produced fibers, as shown in Figure 1. The experimental investigation reveals that the addition of these fibers reduces the mechanical properties of the composite specimen. However it can be concluded that this composite satisfies the basic requirement of non-load bearing construction materials, and they could be used for partition walls and the like. Thus, the potential for development, therefore, seems to be very promising. Finally, apart from saving energy consumption for the building, the proposed materials offer an alternative option to dispose waste of fruit industry.

Effects of potential and concentration of bicarbonate solution on stress corrosion cracking of annealed carbon steel

International Nuclear Information System (INIS)

Haruna, Takumi; Zhu, Liehong; Murakami, Makoto; Shibata, Toshio

2000-01-01

Effects of potential and concentration of bicarbonate on stress corrosion cracking (SCC) of annealed SM 400 B carbon steel has been investigated in bicarbonate solutions at 343 K. The surface of annealed specimen had decarburized layer of about 0. 5 mm thickness. A potentiostatic slow strain rate testing apparatus equipped with a charge coupled device camera system was employed to evaluate SCC susceptibility from the viewpoint of the crack behavior. In a constant bicarbonate concentration of 1 M, cracks were observed in the potential range from -800 to 600 mV Ag/ A gCl . and especially, the initiation and the propagation of the cracks were accelerated at -600 mV. At a constant potential of -600 mV, cracks were observed in the concentration range from 0.001 to 1 M, and the initiation and the propagation of the cracks were suppressed as the concentration decreased. Polarization curves for the decarburized surface were measured with two different scan rates. High SCC susceptibility may be expected in the potential range where the difference between the two current densities is large. It was found in this system that the potential with the maximum difference in the current density was -600 mV for 1 M bicarbonate solution, and the potential increased with a decrease in the concentration of bicarbonate. This means that an applied potential of -600 mV provides the highest SCC susceptibility for 1 M bicarbonate solution, and that the SCC susceptibility decreases as the concentration decreases. These findings support the dependence of the actual SCC behavior on the potential and the concentration of bicarbonate. (author)

Global, finite energy, weak solutions for the NLS with rough, time-dependent magnetic potentials

Science.gov (United States)

Antonelli, Paolo; Michelangeli, Alessandro; Scandone, Raffaele

2018-04-01

We prove the existence of weak solutions in the space of energy for a class of nonlinear Schrödinger equations in the presence of a external, rough, time-dependent magnetic potential. Under our assumptions, it is not possible to study the problem by means of usual arguments like resolvent techniques or Fourier integral operators, for example. We use a parabolic regularisation, and we solve the approximating Cauchy problem. This is achieved by obtaining suitable smoothing estimates for the dissipative evolution. The total mass and energy bounds allow to extend the solution globally in time. We then infer sufficient compactness properties in order to produce a global-in-time finite energy weak solution to our original problem.

Technologies for utilization of industrial excess heat: Potentials for energy recovery and CO2 emission reduction

International Nuclear Information System (INIS)

Broberg Viklund, Sarah; Johansson, Maria T.

2014-01-01

Highlights: • Technologies for recovery and use of industrial excess heat were investigated. • Heat harvesting, heat storage, heat utilization, and heat conversion technologies. • Heat recovery potential for Gävleborg County in Sweden was calculated. • Effects on global CO 2 emissions were calculated for future energy market scenarios. - Abstract: Industrial excess heat is a large untapped resource, for which there is potential for external use, which would create benefits for industry and society. Use of excess heat can provide a way to reduce the use of primary energy and to contribute to global CO 2 mitigation. The aim of this paper is to present different measures for the recovery and utilization of industrial excess heat and to investigate how the development of the future energy market can affect which heat utilization measure would contribute the most to global CO 2 emissions mitigation. Excess heat recovery is put into a context by applying some of the excess heat recovery measures to the untapped excess heat potential in Gävleborg County in Sweden. Two different cases for excess heat recovery are studied: heat delivery to a district heating system and heat-driven electricity generation. To investigate the impact of excess heat recovery on global CO 2 emissions, six consistent future energy market scenarios were used. Approximately 0.8 TWh/year of industrial excess heat in Gävleborg County is not used today. The results show that with the proposed recovery measures approximately 91 GWh/year of district heating, or 25 GWh/year of electricity, could be supplied from this heat. Electricity generation would result in reduced global CO 2 emissions in all of the analyzed scenarios, while heat delivery to a DH system based on combined heat and power production from biomass would result in increased global CO 2 emissions when the CO 2 emission charge is low

Flow fields in the supersonic through-flow fan. Comparison of the solutions of the linear potential theory and the numerical solution of the Euler equations; Choonsoku tsukaryu fan nai no nagareba. Senkei potential rironkai to Euler hoteishiki no suchikai no hikaku

Energy Technology Data Exchange (ETDEWEB)

Yamasaki, N; Nanba, M; Tashiro, K [Kyushu University, Fukuoka (Japan). Faculty of Engineering

1996-03-27

Comparison study between solutions of a linear potential theory and numerical solution of Euler equations was made for flow in a supersonic through-flow fan. In numerical fluid dynamic technique, Euler equations are solved by finite difference method under the assumption of air and perfect gas fluid, and neglected viscosity and thermal conductivity of fluid. As a result, in a linear potential theory, expansion wave was regarded as equipotential discontinuous surface, while in Euler numerical solution, it was regarded as finite pressure gradient where a wave front fans out toward downstream. The latter reflection point of shock wave on a wing existed upstream as compared with the former reflection point. The shock wave angle was dominated by Euler equations, and different from the Mach line of a linear potential theory in both angle and discontinuous quantities in front and behind. Both calculated solutions well agreed with each other until the first reflection point of the Mach line, however, thereafter the difference between them increased toward downstream. 5 refs., 5 figs., 1 tab.

DISAIN PROSES KEAMANAN PANGAN PADA SISTEM MANAJEMEN INDUSTRI PAKAN UNGGAS

Directory of Open Access Journals (Sweden)

Legis Tsaniyah

2017-11-01

Full Text Available The feed industry shall maintain quality and food safety of their products. The research conducted in the year of 2015-2016 was to design the optimum condition of food safety consideration for feed industries in Indonesia. Feed for livestock was formulated by using corn meal, soya protein, fish meals, rice bran, veterinary drugs, steam, and other ingredients. Growth promotor materials were formulated from vitamin, antibiotics, amino acid, methylene blue, and other trace elements also were added in the formulation. The feed ingredients are potential sources of food safety hazard in feed products. Result of model analysis found the major sources of food safety risks, i.e.1 veterinary drugs residues (X1; 2 aflatoxin potential in humid corn meals (X2, and3 alfatoxin potential in humid soya meal (X3. Minimisation model formulated for food safety in feed production was Z = 13.78 X1 + 10.00 X2 + 7.67 X3. The optimisation model by using simplex solution found maximum bioaccumulation value index of 93.33 per ton feed production. The verification model done for two feed industries and calculated bioaccumulation index were 20.16 and 24.43 per ton livestock feed production. The result concluded that the feed produced by both industries have been recommended safe to consume. The optimum condition for food safety in livestock feed industry interpreted from this optimal conditions.

Comparison of potential field solutions for Carrington Rotation 2144

Science.gov (United States)

Hayashi, Keiji; Yang, Shangbin; Deng, Yuagyong

2016-02-01

We examined differences among the coronal magnetic field structures derived with the potential field source surface (PFSS) model for Carrington Rotation 2144, from 21 November to 19 December 2013. We used the synoptic maps of solar photospheric magnetic field from four observatories, the Huairou Solar Observing Station (HSOS), Global Oscillation Network Group (GONG), Helioseismic Magnetic Imager (HMI), and Wilcox Solar Observatory (WSO). We tested two smoothing methods, Gaussian and boxcar averaging, and correction of unbalanced net magnetic flux. The solutions of three-dimensional coronal magnetic field are significantly different each other. An open-field region derived with HSOS data agrees best with the corresponding coronal hole observed by Solar Dynamics Observatories/Atmospheric Imaging Assembly, while HMI data yielded best agreements with the near-Earth OMNI database. The GONG data overall gave agreements as good as the HMI. The PFSS calculations using WSO data were least sensitive to the choices we examined in this work. Differences in PFSS solutions using different choices and parameters in smoothing imply that the photospheric magnetic field distributions with size of several degrees at midlatitude and low-latitude regions can be decisive, at least, in the examined period. To better determine the global solar corona, therefore, further evaluation of influences from compact bipolar magnetic field is needed.

Menthol's potential effects on nicotine dependence: a tobacco industry perspective.

Science.gov (United States)

Yerger, Valerie B

2011-05-01

To examine what the tobacco industry knows about the potential effects menthol may have on nicotine dependence. A snowball strategy was used to systematically search the Legacy Tobacco Documents Library (http://legacy.library.ucsf.edu/) between 22 February and 29 April, 2010. Of the approximately 11 million documents available in the Legacy Tobacco Documents Library, the iterative searches returned tens of thousands of results. We qualitatively analysed a final collection of 309 documents relevant the effects of menthol on nicotine dependence. The tobacco industry knows that menthol overrides the harsh taste of tobacco and alleviates nicotine's irritating effects, synergistically interacts with nicotine, stimulates the trigeminal nerve to elicit a 'liking' response for a tobacco product, and makes low tar, low nicotine tobacco products more acceptable to smokers than non-mentholated low delivery products. Menthol is not only used in cigarettes as a flavour additive; tobacco companies know that menthol also has sensory effects and interacts with nicotine to produce tobacco products that are easier to smoke, thereby making it easier to expose smokers, especially those who are new and uninitiated, to the addictive power of nicotine.

Supply chain bottlenecks in the South African construction industry: Qualitative insights

Directory of Open Access Journals (Sweden)

Poobalan Pillay

2017-07-01

Full Text Available Background: The construction industry in South Africa has a lot of potential but its performance is still restricted by numerous internal and external challenges. Unless these challenges are identified and understood better, further growth of this industry is likely to be hindered, which has negative economic implications for the South African economy. Objectives: This study investigated supply chain bottlenecks faced by the construction industry in South Africa. It also discussed solutions for addressing the identified bottlenecks in order to facilitate the continued development of supply chain management in the construction industry. Method: The study used a qualitative approach in which in-depth interviews were held with purposively selected senior managers drawn from the construction industry in South Africa. Content analysis using ATLAS.ti software was employed to identify the themes from the collected data. Findings: The findings of the study showed that supply chain management in the construction industry in South Africa is constrained by five major bottlenecks: skills and qualifications, procurement practices and systems, supply chain integration, supply chain relationships and the structure of the construction industry. Recommendations for addressing each of these five challenges were put forward. Conclusion: The study concludes that both awareness and application of supply chain management in the construction industry in South Africa remains inhibited, which creates opportunities for further improvements in this area to realise the full potential of the industry.

Microbial keratinases: industrial enzymes with waste management potential.

Science.gov (United States)

Verma, Amit; Singh, Hukum; Anwar, Shahbaz; Chattopadhyay, Anirudha; Tiwari, Kapil K; Kaur, Surinder; Dhilon, Gurpreet Singh

2017-06-01

Proteases are ubiquitous enzymes that occur in various biological systems ranging from microorganisms to higher organisms. Microbial proteases are largely utilized in various established industrial processes. Despite their numerous industrial applications, they are not efficient in hydrolysis of recalcitrant, protein-rich keratinous wastes which result in environmental pollution and health hazards. This paved the way for the search of keratinolytic microorganisms having the ability to hydrolyze "hard to degrade" keratinous wastes. This new class of proteases is known as "keratinases". Due to their specificity, keratinases have an advantage over normal proteases and have replaced them in many industrial applications, such as nematicidal agents, nitrogenous fertilizer production from keratinous waste, animal feed and biofuel production. Keratinases have also replaced the normal proteases in the leather industry and detergent additive application due to their better performance. They have also been proved efficient in prion protein degradation. Above all, one of the major hurdles of enzyme industrial applications (cost effective production) can be achieved by using keratinous waste biomass, such as chicken feathers and hairs as fermentation substrate. Use of these low cost waste materials serves dual purposes: to reduce the fermentation cost for enzyme production as well as reducing the environmental waste load. The advent of keratinases has given new direction for waste management with industrial applications giving rise to green technology for sustainable development.

Business-to-business electronic commerce systems and services. Smart EC solution; Kigyoka nrenkei system solution system. Smart EC solution

Energy Technology Data Exchange (ETDEWEB)

Setoguchi, T.; Manchu, Y.; Katsumata, M. [Toshiba Corp., Tokyo (Japan)

2000-04-01

Toshiba provides a range of information technology (IT) solutions called SmartEC Solution, which includes business-to-business electronic commerce systems and services based on international standards and industrial know-how, especially our electronic data interchange (EDI) know-how as a manufacturer. These IT solutions are supplied as services covering strategy planning, system integration, and application service provider based on five types of business-to-business electronic commerce. (author)

Cosmological solutions in string theory with dilaton self interaction potential; Soluciones cosmologicas en teoria de cuerdas con potencial de autointeraccion dilatonico

Energy Technology Data Exchange (ETDEWEB)

Mora, C. [Departamento de Matematicas, Unidad Profesional Interdisciplinaria de Biotecnologia, IPN, Av. Acueducto s/n Barrio La Laguna Ticoman, 07340 Mexico D.F. (Mexico)]. E-mail: cmora@acei.upibi.ipn.mx; Pimentel, L.O. [Departamento de Fisica, Universidad Autonoma Metropolitana-lztapalapa, A.P. 44-534, 09340Mexico, D.F. (Mexico)]. E-mail: lopr@xanum.uam.mx

2003-07-01

In this work we present homogeneous and isotropic cosmological solutions for the low energy limit of string theory with a self interacting potential for the scalar field. For a potential that is a linear combination of two exponential, a family of exact solutions are found for the different spatial curvatures. Among this family a non singular accelerating solution for positive curvature is singled out and the violation of the energy conditions for that solution is studied, and also its astrophysical consequences. The string coupling for this solution is finite. (Author)

Assessing potential forest and steel inter-industry residue utilisation by sequential chemical extraction

Energy Technology Data Exchange (ETDEWEB)

Makela, M.

2012-10-15

Traditional process industries in Finland and abroad are facing an emerging waste disposal problem due recent regulatory development which has increased the costs of landfill disposal and difficulty in acquiring new sites. For large manufacturers, such as the forest and ferrous metals industries, symbiotic cooperation of formerly separate industrial sectors could enable the utilisation waste-labeled residues in manufacturing novel residue-derived materials suitable for replacing commercial virgin alternatives. Such efforts would allow transforming the current linear resource use and disposal models to more cyclical ones and thus attain savings in valuable materials and energy resources. The work described in this thesis was aimed at utilising forest and carbon steel industry residues in the experimental manufacture of novel residue-derived materials technically and environmentally suitable for amending agricultural or forest soil properties. Single and sequential chemical extractions were used to compare the pseudo-total concentrations of trace elements in the manufactured amendment samples to relevant Finnish statutory limit values for the use of fertilizer products and to assess respective potential availability under natural conditions. In addition, the quality of analytical work and the suitability of sequential extraction in the analysis of an industrial solid sample were respectively evaluated through the analysis of a certified reference material and by X-ray diffraction of parallel sequential extraction residues. According to the acquired data, the incorporation of both forest and steel industry residues, such as fly ashes, lime wastes, green liquor dregs, sludges and slags, led to amendment liming capacities (34.9-38.3%, Ca equiv., d.w.) comparable to relevant commercial alternatives. Only the first experimental samples showed increased concentrations of pseudo-total cadmium and chromium, of which the latter was specified as the trivalent Cr(III). Based on

Computational Challenge of Fractional Differential Equations and the Potential Solutions: A Survey

Directory of Open Access Journals (Sweden)

Chunye Gong

2015-01-01

Full Text Available We present a survey of fractional differential equations and in particular of the computational cost for their numerical solutions from the view of computer science. The computational complexities of time fractional, space fractional, and space-time fractional equations are O(N2M, O(NM2, and O(NM(M + N compared with O(MN for the classical partial differential equations with finite difference methods, where M, N are the number of space grid points and time steps. The potential solutions for this challenge include, but are not limited to, parallel computing, memory access optimization (fractional precomputing operator, short memory principle, fast Fourier transform (FFT based solutions, alternating direction implicit method, multigrid method, and preconditioner technology. The relationships of these solutions for both space fractional derivative and time fractional derivative are discussed. The authors pointed out that the technologies of parallel computing should be regarded as a basic method to overcome this challenge, and some attention should be paid to the fractional killer applications, high performance iteration methods, high order schemes, and Monte Carlo methods. Since the computation of fractional equations with high dimension and variable order is even heavier, the researchers from the area of mathematics and computer science have opportunity to invent cornerstones in the area of fractional calculus.

75 FR 32952 - Draft Guidance for Industry and Food and Drug Administration Staff; “‘Harmful and Potentially...

Science.gov (United States)

2010-06-10

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-D-0281] Draft Guidance for Industry and Food and Drug Administration Staff; ```Harmful and Potentially Harmful... Food, Drug, and Cosmetic Act.'' This draft guidance provides written guidance to industry and FDA staff...

Radiation induced environmental remediation of Cr(VI) heavy metal in aerated neutral solution under simulated industrial effluent

Energy Technology Data Exchange (ETDEWEB)

Djouider, Fathi; Aljohani, Mohammed S. [King Abdulaziz Univ., Jeddah (Saudi Arabia). Nuclear Engineering Dept.

2017-08-01

Cr(VI) compounds are major water contaminants in most industrial effluents, due to their carcinogenicity, while Cr(III) is an important element for human metabolism. In a previous work, we showed that Cr(VI) was radiolytically reduced to Cr(III) by the CO{sub 2}{sup -.} radical at pH 3 N{sub 2}O-saturated solution in the presence of formate. Here in the present work, this removal was investigated by steady state irradiation and pulse radiolysis in aerated solution at neutral pH, which is close to natural conditions in most wastewaters, where the reducing agent is the superoxide radical anion O{sub 2}{sup -.} The degradation of Cr(VI) increased linearly with the absorbed dose and was significantly enhanced by the added formate but not by the radiolitically produced hydrogen peroxide at this pH. The rate constant for this reduction was found to be 1.28 x 10{sup 8} M{sup -1} s{sup -1} and the absorption spectrum of Cr(V) transient species was obtained. A partial recovery of Cr(VI) is observed over a period of ca. 5 ms following a second order kinetics with a rate constant 8.0 x 10{sup 6} M{sup -1} s{sup -1}. These outcomes suggest that gamma-irradiation of Cr(VI)-contaminated wastewaters and industrial effluents in presence of formate can be simple, effective and economical means for the remediation of this major contaminant.

Market potential for solar thermal energy supply systems in the United States industrial and commercial sectors: 1990--2030

International Nuclear Information System (INIS)

1991-12-01

This report revises and extends previous work sponsored by the US DOE on the potential industrial market in the United States for solar thermal energy systems and presents a new analysis of the commercial sector market potential. Current and future industrial process heat demand and commercial water heating, space heating and space cooling end-use demands are estimated. The PC Industrial Model (PCIM) and the commercial modules of the Building Energy End-Use Model (BEEM) used by the DOE's Energy Information Administration (EIA) to support the recent National Energy Strategy (NES) analysis are used to forecast industrial and commercial end-use energy demand respectively. Energy demand is disaggregated by US Census region to account for geographic variation in solar insolation and regional variation in cost of alternative natural gas-fired energy sources. The industrial sector analysis also disaggregates demand by heat medium and temperature range to facilitate process end-use matching with appropriate solar thermal energy supply technologies. The commercial sector analysis disaggregates energy demand by three end uses: water heating, space heating, and space cooling. Generic conceptual designs are created for both industrial and commercial applications. Levelized energy costs (LEC) are calculated for industrial sector applications employing low temperature flat plate collectors for process water preheat; parabolic troughs for intermediate temperature process steam and direct heat industrial application; and parabolic dish technologies for high temperature, direct heat industrial applications. LEC are calculated for commercial sector applications employing parabolic trough technologies for low temperature water and space heating. Cost comparisons are made with natural gas-fired sources for both the industrial market and the commercial market assuming fuel price escalation consistent with NES reference case scenarios for industrial and commercial sector gas markets

THE ROLE OF INDUSTRIAL PARCS IN ECONOMIC DEVELOPMENT

Directory of Open Access Journals (Sweden)

MEȘTER Liana-Eugenia

2013-07-01

The approach of the subject is theoretical starting from the need to support the economic activities by local social institutions fostering the access to information and technology and identifying some solutions that meet these needs - industrial parks. Even if industrial parks in Romania are still considered in draft form, some examples can be identified as functional and supporting the local development. Their functionality is given by the involvement of local authorities and the interest of the business environment in exploiting the economic potential of the region. The role of industrial parks in supporting the local development is measured in the number of new jobs created, the income received by local institutions by paying taxes and duties from firms benefiting from the infrastructure made available through their involvement in attracting investors; the more productive the industry and more efficient the production, the higher the company\\\\\\'s results and therefore the benefits of local institutions.

Insights into lignin degradation and its potential industrial applications.

Science.gov (United States)

Abdel-Hamid, Ahmed M; Solbiati, Jose O; Cann, Isaac K O

2013-01-01

Lignocellulose is an abundant biomass that provides an alternative source for the production of renewable fuels and chemicals. The depolymerization of the carbohydrate polymers in lignocellulosic biomass is hindered by lignin, which is recalcitrant to chemical and biological degradation due to its complex chemical structure and linkage heterogeneity. The role of fungi in delignification due to the production of extracellular oxidative enzymes has been studied more extensively than that of bacteria. The two major groups of enzymes that are involved in lignin degradation are heme peroxidases and laccases. Lignin-degrading peroxidases include lignin peroxidase (LiP), manganese peroxidase (MnP), versatile peroxidase (VP), and dye-decolorizing peroxidase (DyP). LiP, MnP, and VP are class II extracellular fungal peroxidases that belong to the plant and microbial peroxidases superfamily. LiPs are strong oxidants with high-redox potential that oxidize the major non-phenolic structures of lignin. MnP is an Mn-dependent enzyme that catalyzes the oxidation of various phenolic substrates but is not capable of oxidizing the more recalcitrant non-phenolic lignin. VP enzymes combine the catalytic activities of both MnP and LiP and are able to oxidize Mn(2+) like MnP, and non-phenolic compounds like LiP. DyPs occur in both fungi and bacteria and are members of a new superfamily of heme peroxidases called DyPs. DyP enzymes oxidize high-redox potential anthraquinone dyes and were recently reported to oxidize lignin model compounds. The second major group of lignin-degrading enzymes, laccases, are found in plants, fungi, and bacteria and belong to the multicopper oxidase superfamily. They catalyze a one-electron oxidation with the concomitant four-electron reduction of molecular oxygen to water. Fungal laccases can oxidize phenolic lignin model compounds and have higher redox potential than bacterial laccases. In the presence of redox mediators, fungal laccases can oxidize non

Numerical solution of the Schroedinger equation with a polynomial potential

International Nuclear Information System (INIS)

Campoy, G.; Palma, A.

1986-01-01

A numerical method for solving the Schroedinger equation for a potential expressed as a polynomial is proposed. The basic assumption relies on the asymptotic properties of the solution of this equation. It is possible to obtain the energies and the stationary state functions simultaneously. They analyze, in particular, the cases of the quartic anharmonic oscillator and a hydrogen atom perturbed by a quadratic term, obtaining its energy eigenvalues for some values of the perturbation parameter. Together with the Hellmann-Feynman theorem, they use their algorithm to calculate expectation values of x'' for arbitrary positive values of n. 4 tables

Unscented Kalman filter assimilation of time-lapse self-potential data for monitoring solute transport

Science.gov (United States)

Cui, Yi-an; Liu, Lanbo; Zhu, Xiaoxiong

2017-08-01

Monitoring the extent and evolution of contaminant plumes in local and regional groundwater systems from existing landfills is critical in contamination control and remediation. The self-potential survey is an efficient and economical nondestructive geophysical technique that can be used to investigate underground contaminant plumes. Based on the unscented transform, we have built a Kalman filtering cycle to conduct time-lapse data assimilation for monitoring the transport of solute based on the solute transport experiment using a bench-scale physical model. The data assimilation was formed by modeling the evolution based on the random walk model and observation correcting based on the self-potential forward. Thus, monitoring self-potential data can be inverted by the data assimilation technique. As a result, we can reconstruct the dynamic process of the contaminant plume instead of using traditional frame-to-frame static inversion, which may cause inversion artifacts. The data assimilation inversion algorithm was evaluated through noise-added synthetic time-lapse self-potential data. The result of the numerical experiment shows validity, accuracy and tolerance to the noise of the dynamic inversion. To validate the proposed algorithm, we conducted a scaled-down sandbox self-potential observation experiment to generate time-lapse data that closely mimics the real-world contaminant monitoring setup. The results of physical experiments support the idea that the data assimilation method is a potentially useful approach for characterizing the transport of contamination plumes using the unscented Kalman filter (UKF) data assimilation technique applied to field time-lapse self-potential data.

Crop residues as a potential renewable energy source for Malawi's cement industry

DEFF Research Database (Denmark)

Gondwe, Kenneth J.; Chiotha, Sosten S.; Mkandawire, Theresa

2017-01-01

that the projected total energy demands in 2020, 2025 and 2030 were approximately 177 810 TJ, 184 210 TJ and 194 096 TJ respectively. The highest supply potentials were found to be in the central and southern regions of Malawi, coinciding with the locations of the two clinker plants. Crop residues could meet 45......-57% of the national total energy demand. The demand from the cement industry is only 0.8% of the estimated biomass energy potential. At an annual production of 600 000 t of clinker and 20% biomass co-firing with coal, 18 562 t of coal consumption would be avoided and 46 128 t of carbon dioxide emission reduction...

Biosorption of Metals from Multi-Component Bacterial Solutions

CERN Document Server

Tsertsvadze, L A; Petriashvili, Sh G; Chutkerashvili, D G; Kirkesali, E I; Frontasyeva, M V; Pavlov, S S; Gundorina, S F

2002-01-01

The method of extraction of metals from industrial solutions by means of economical and easy to apply biosorbents in subtropics such as products of tea manufacturing, moss, microorganisms is described. The multi-component solutions obtained in the process of leaching of ores, rocks and industrial wastes by peat suspension were used in the experiments. The element composition of sorbent biomass and solutions was investigated by epithermal neutron activation analysis and by atomic absorption spectrometry. The results obtained evidence that the used biosorbents are applicable for extraction of the whole set of heavy metals and actinides (U, Th, Cu, Mn, Fe, Pb, Li, Rb, Sr, Cd, As, Co and others) from industrial solutions.

The exact solutions of the Schroedinger equation with the Morse potential via Laplace transforms

International Nuclear Information System (INIS)

Chen Gang

2004-01-01

In this Letter, we reduce the second-order differential equation about the one-dimensional Schroedinger equation with the Morse potential reduced to the first-order differential equation in terms of Laplace transforms and then obtain the exact bound state solutions

Potential industrial market for process heat from nuclear reactors

International Nuclear Information System (INIS)

Barnes, R.W.

1976-07-01

A specific segment of industrial process heat use has been examined in detail to identify individual plant locations throughout the United states where nuclear generated steam may be a viable alternative. Five major industries have been studied: paper, chemicals, petroleum, rubber, and primary metals. For these industries, representing 75 percent of the total industrial steam consumption, the individual plant locations within the U.S. using steam in large quantities have been located and characterized as to fuel requirements

Potential of Nanotechnology based water treatment solutions for the improvement of drinking water supplies in developing countries

Science.gov (United States)

Dutta, Joydeep; Bhattacharya, Prosun; Bundschuh, Jochen

2016-04-01

Over the last decades explosive population growth in the world has led to water scarcity across the globe putting additional pressure already scarce ground water resources and is pushing scientists and researchers to come up with new alternatives to monitor and treat water for use by mankind and for food security. Nearly 4 billion people around the world are known to lack access to clean water supply. Systematic water quality data is important for the assessment of health risks as well as for developing appropriate and affordable technologies for waste and drinking water treatments, and long-term decision making policy against water quality management. Traditional water treatment technologies are generally chemical-intensive processes requiring extremely large infrastructural support thus limiting their effective applications in developing nations which creates an artificial barrier to the application of technological solutions for the provision of clean water. Nanotechnology-based systems are in retrospect, smaller, energy and resource efficient. Economic impact assessment of the implementation of nanotechnology in water treatment and studies on cost-effectiveness and environmental and social impacts is of key importance prior to its wide spread acceptance. Government agencies and inter-governmental bodies driving research and development activities need to measure the effective potential of nanotechnology as a solution to global water challenges in order to effectively engage in fiscal, economic and social issues at national and international levels for different types of source waters with new national and international initiatives on nanotechnology and water need to be launched. Environmental pollution and industrialization in global scale is further leading to pollution of available water sources and thus hygienically friendly purification technologies are the need of the hour. Thus cost-effective treatment of pollutants for the transformation of hazardous

Some exact solutions to the potential Kadomtsev-Petviashvili equation and to a system of shallow water wave equations

International Nuclear Information System (INIS)

Inan, Ibrahim E.; Kaya, Dogan

2006-01-01

In this Letter by considering an improved tanh function method, we found some exact solutions of the potential Kadomtsev-Petviashvili equation. Some exact solutions of the system of the shallow water wave equation were also found

Explicit and exact nontraveling wave solutions of the (3+1)-dimensional potential Yu-Toda-Sasa-Fukuyama equation

Science.gov (United States)

Yuan, Na

2018-04-01

With the aid of the symbolic computation, we present an improved ( G ‧ / G ) -expansion method, which can be applied to seek more types of exact solutions for certain nonlinear evolution equations. In illustration, we choose the (3 + 1)-dimensional potential Yu-Toda-Sasa-Fukuyama equation to demonstrate the validity and advantages of the method. As a result, abundant explicit and exact nontraveling wave solutions are obtained including two solitary waves solutions, nontraveling wave solutions and dromion soliton solutions. Some particular localized excitations and the interactions between two solitary waves are researched. The method can be also applied to other nonlinear partial differential equations.

Recent trends of nitrogen flow of typical agro-ecosystems in China--major problems and potential solutions.

Science.gov (United States)

Liu, Chen; Wang, Qinxue; Yang, Yonghui; Wang, Kelin; Ouyang, Zhu; Li, Yan; Lei, Alin; Yasunari, Tetsuzo

2012-03-30

To diagnose problems that threaten regional sustainability and to devise appropriate treatment measures in China's agro-ecosystems, a study was carried out to quantify the nitrogen (N) flow in China's typical agro-ecosystems and develop potential solutions to the increasing environmental N load. The analysis showed that owing to human activity in the agro-ecosystems of Changjiang River Basin the mean total input of anthropogenic reactive N (i.e. chemical fertiliser, atmospheric deposition and bio-N fixation) increased from 4.41 × 10(9) kg-N in 1980 to 7.61 × 10(9) kg-N in 1990 and then to 1.43 × 10(10) kg-N in 2000, with chemical fertiliser N being the largest contributor to N load. Field investigation further showed that changes in human behaviour and rural urbanisation have caused rural communities to become more dependent on chemical fertilisers. In rural regions, around 4.17 kg-N of per capita annual potential N load as excrement was returned to farmlands and 1.38 kg-N directly discharged into river systems, while in urbanised regions, around 1.00 kg-N of per capita annual potential N load as excrement was returned to farmlands and 5.62 kg-N discharged into river systems in urban areas. The findings of the study suggest that human activities have significantly altered the N cycle in agro-ecosystems of China. With high population density and scarce per capita water resources, non-point source pollution from agro-ecosystems continues to put pressure on aquatic ecosystems. Increasing the rate of organic matter recycling and fertiliser efficiency with limited reliance on chemical fertilisers might yield tremendous environmental benefits. Copyright © 2011 Society of Chemical Industry.

The industrial application of a uranium dioxide electrode

International Nuclear Information System (INIS)

Needes, C.R.S.; Nicol, M.J.; Finkelstein, N.P.; Ormrod, G.T.W.

1975-01-01

A correlation between the potential of a UO 2 electrode and the rate of recovery of uranium has been proved in laboratory and plant trials. When the recovery rates change because of variation in the concentrations of Fe(III), Fe(II), SO 2- 4 , and H + , a positive correlation is observed. However, an increase in the concentration of phosphate in solution produces an increase in the UO 2 electrode potential but a decrease in the rate of leaching of UO 2 . The correlation between the UO 2 electrode potential and the rate of leaching of UO 2 is then negative. It is concluded that, as a control device, the electrode cannot compete with the platinum electrode for use on certain plants. Nevertheless, the UO 2 electrode will act as a useful warning device if the total concentration of iron in solution decreases to below a level concomitant with the economic recovery of uranium. Furthermore, because of the positive correlation between the UO 2 electrode potential and the phosphate concentration, the electrode will also be of value in the detection of an increase in the phosphate level in solution. When it was incorporated in a suitable industrial probe, the electrode was found to be able to withstand the rigours of the leaching conditions in a large pilot-plant pachuca, and only failed after six weeks operation [af

Anaerobic Digestion and Biogas Potential: Simulation of Lab and Industrial-Scale Processes

OpenAIRE

Ihsan Hamawand; Craig Baillie

2015-01-01

In this study, a simulation was carried out using BioWin 3.1 to test the capability of the software to predict the biogas potential for two different anaerobic systems. The two scenarios included: (1) a laboratory-scale batch reactor; and (2) an industrial-scale anaerobic continuous lagoon digester. The measured data related to the operating conditions, the reactor design parameters and the chemical properties of influent wastewater were entered into BioWin. A sensitivity analysis was carried...

Taming wild yeast: potential of conventional and nonconventional yeasts in industrial fermentations.

Science.gov (United States)

Steensels, Jan; Verstrepen, Kevin J

2014-01-01

Yeasts are the main driving force behind several industrial food fermentation processes, including the production of beer, wine, sake, bread, and chocolate. Historically, these processes developed from uncontrolled, spontaneous fermentation reactions that rely on a complex mixture of microbes present in the environment. Because such spontaneous processes are generally inconsistent and inefficient and often lead to the formation of off-flavors, most of today's industrial production utilizes defined starter cultures, often consisting of a specific domesticated strain of Saccharomyces cerevisiae, S. bayanus, or S. pastorianus. Although this practice greatly improved process consistency, efficiency, and overall quality, it also limited the sensorial complexity of the end product. In this review, we discuss how Saccharomyces yeasts were domesticated to become the main workhorse of food fermentations, and we investigate the potential and selection of nonconventional yeasts that are often found in spontaneous fermentations, such as Brettanomyces, Hanseniaspora, and Pichia spp.

Classical solutions for discrete potential boundary value problems with generalized Leray-Lions type operator and variable exponent

Directory of Open Access Journals (Sweden)

Bila Adolphe Kyelem

2017-04-01

Full Text Available In this article, we prove the existence of solutions for some discrete nonlinear difference equations subjected to a potential boundary type condition. We use a variational technique that relies on Szulkin's critical point theory, which ensures the existence of solutions by ground state and mountain pass methods.

Obesity prevention: Comparison of techniques and potential solution

Science.gov (United States)

Zulkepli, Jafri; Abidin, Norhaslinda Zainal; Zaibidi, Nerda Zura

2014-12-01

Over the years, obesity prevention has been a broadly studied subject by both academicians and practitioners. It is one of the most serious public health issue as it can cause numerous chronic health and psychosocial problems. Research is needed to suggest a population-based strategy for obesity prevention. In the academic environment, the importance of obesity prevention has triggered various problem solving approaches. A good obesity prevention model, should comprehend and cater all complex and dynamics issues. Hence, the main purpose of this paper is to discuss the qualitative and quantitative approaches on obesity prevention study and to provide an extensive literature review on various recent modelling techniques for obesity prevention. Based on these literatures, the comparison of both quantitative and qualitative approahes are highlighted and the justification on the used of system dynamics technique to solve the population of obesity is discussed. Lastly, a potential framework solution based on system dynamics modelling is proposed.

The marketing potential of corporate social responsibility activities: the case of the alcohol industry in Latin America and the Caribbean.

Science.gov (United States)

Pantani, Daniela; Peltzer, Raquel; Cremonte, Mariana; Robaina, Katherine; Babor, Thomas; Pinsky, Ilana

2017-01-01

The aims were to: (1) identify, monitor and analyse the Corporate Social Responsibility (CSR) practices of the alcohol industry in Latin America and the Caribbean (LAC) and (2) examine whether the alcohol industry is using these actions to market their products and brands. Nine health experts from Argentina, Brazil and Uruguay conducted a content analysis of 218 CSR activities using a standardized protocol. A content rating procedure was used to evaluate the marketing potential of CSR activities as well as their probable population reach and effectiveness. The LEAD procedure (longitudinal, expert and all data) was applied to verify the accuracy of industry-reported descriptions. A total of 55.8% of the actions were found to have a marketing potential, based on evidence that they are likely to promote brands and products. Actions with marketing potential were more likely to reach a larger audience than actions classified with no marketing potential. Most actions did not fit into any category recommended by the World Health Organization; 50% of the actions involving classroom and college education for young people were found to have marketing potential; 62.3% were classified as meeting the definition of risk management CSR. Alcohol industry Corporate Social Responsibility activities in Latin America and the Caribbean appear to have a strategic marketing role beyond their stated philanthropic and public health purpose. © 2016 Society for the Study of Addiction.

Potentiality of uranium biosorption from nitric acid solutions using shrimp shells

International Nuclear Information System (INIS)

Ahmed, S.H.; El Sheikh, E.M.; Morsy, A.M.A.

2014-01-01

Biosorption has gained important credibility during recent years because of its good performance and low cost. This work is concerned with studying the potentiality of the chitin component of the shrimp shells for uranium biosorption from nitric acid liquid solutions. The structural characteristics of the working chitin have been determined via Fourier Transform Infrared Spectroscopy (FTIR). The surface morphology was examined using Scanning Electron Microscopy (SEM). The adsorption capacity of biomass was investigated experimentally. The influence of contact time, pH, metal ion concentration, solution volume to mass ratio and temperature were evaluated and the results were fitted using adsorption isotherm models. The kinetic of uranium biosorption was also investigated as well as biosorption thermodynamic. - Graphical abstract: Physicochemical process of biosorption is known to be promising technique due to the ease of operation and comparable low cost of biosorbant application. Chitin flakes extracted from shrimp shells show potentiality in uranium adsorption reached 7.48 mg uranium at the following conditions: 60 min contact time, pH 3.66, 50:1 V/m ration and at room temperature. The theoretical sorption capacity was 25.31 mg g −1 , according to Langmuir isotherm model. The rate of sorption follows pseudo second-order. The nature of biosorption process is spontaneous and exothermic. - Highlights: • This study shows the potentially for shrimp shell beads for uranium adsorption. • The max. biosorption was achieved at pH 3.6, contact time 60 min, S/L ratio 1:50. • Uranium sorption follows Langmuir isotherm with theoretical capacity of 25.31 g/kg. • The nature of sorption process of the sorbents is spontaneous and exothermic. • The rate of sorption follows pseudo second-order

The potential of medical device industry in technological and economical context

Directory of Open Access Journals (Sweden)

Maresova P

2015-10-01

Full Text Available Petra Maresova,1 Marek Penhaker,1,2 Ali Selamat,1,3 Kamil Kuca1,41Faculty of Informatics and Management, University of Hradec Králové, Hradec Králové, Czech Republic; 2Department of Cybernetics and Biomedical Engineering, Faculty of Electrical Engineering and Computer Science, Technical University of Ostrava, Poruba, Czech Republic; 3Faculty of Computing, Universiti Teknologi Malaysia, Johor Bahru, Johor, Malaysia; 4Center for Biomedical Research, University Hospital Hradec Králové, Hradec Králové, Czech RepublicAbstract: The high quality of public health improves not only healthy life expectancy, but also the productivity of labor. The most important part of the health care sector is the medical technology industry. The aim of this study is to analyze the current situation in the medical device industry in Europe, its potential strengths and weaknesses in the context of topical economic and demographic development. The contribution specifies an analysis of the economic state of the medical device industry in the context of demographic development of European Union’s macroeconomic indicators and views of experts in the field of medical device development, concerning the opportunities for entities involved in the medical device market. There is fierce competition on the European market. The innovative activity is stable and well regulated by responsible authorities. Worldwide, the medical device market is expected to grow.Keywords: technology context, medical device, Europe, expenditure, review

Effect of gamma irradiation in the viscosity of gelatin and pectin solutions used in food industry

International Nuclear Information System (INIS)

Inamura, Patricia Yoko

2008-01-01

Pectin is a polysaccharide substance of plant origin that may be used as gelling agent, stabilizer in jams, in yogurt drinks and lactic acid beverages. Gelatin, a protein from bovine origin, in this case, is mainly used as gelling agent due to hydrogel formation during cooling. The 60 Co-irradiation process may cause various modifications in macromolecules, some with industrial application, as reticulation. The dynamic response of viscoelastic materials can be used in order to give information about the structural aspect of a system at molecular level. In the present work samples of pectin with different degree of methoxylation, gelatin and the mixture of both were employed to study the radiation sensitivity by means of viscosity measurements. Solutions prepared with citric pectin with high methoxylation content (ATM) 1 por cent, pectin with low content (BTM) 1 por cent, gelatin 0.5 por cent, 1 por cent and 2 por cent, and the mixture 1 por cent and 2 por cent were irradiated with gamma rays at different doses, up to 15 kGy with dose rate about 2 kGy/h. After irradiation the viscosity was measured within a period of 48 h. The viscosity of ATM and BTM pectin solutions decreased sharply with the radiation dose. However, the gelatin sample presented a great radiation resistance. When pectin and gelatin solutions were mixed a predominance of pectin behavior was found. (author)

Industrial subdivisions in Aguascalientes State [Mexico]: Valley Region, potential spaces for development in the 21st Century

Directory of Open Access Journals (Sweden)

Héctor Daniel García Díaz

2014-04-01

Full Text Available The planning policies of the Mexican urban development oriented to the industrial activities implemented regionally and locally, have responded in different ways. The commitment to the sector led to the need to regulate urban growth and development as a substantial factor in achieving government strategies in the search for equitable sharing of national wealth and potential. The publication in 1976 of the General Law of Human Settlements born with this fundamental purpose. Excessive administrative burden of the Mexican social property and the need to insert in an increasingly globalizing economic activities led, in 1992 and 1994, respectively, the amendments to the Land Act and the signing of the Free Trade Agreement between North America, Canada, United States and Mexico. In the West Central Region, consisting of the metropolitan areas of Guadalajara, Zacatecas, San Luis Potosi, Queretaro, Guanajuato and Aguascalientes, spatial area in which a third of the country's inhabitants is based, and hosts the 100% extension territorial state of Aguascalientes, have been exploited discontinuously the natural and man-made resources available in the area. In the Valley of Aguascalientes, north-south strip of the state territory, have been authorized industrial subdivisions under plans and urban development programs that have accelerated or inhibited impulses, according to the vision and expectations of government power in turn; the different rhythms and changes of strategy applied to organize the disorder potential of the rural and urban environment express divergences in the reaches of consolidation and longed purposes. Research indicates and identifies the dynamics with which the last eight administrations of the Mexican State have acted in shaping the industrial potential of the Valley, which the south side hosts industrial city, Nissan I, Nissan II and Automotive Logistics Industrial Park, industrial settlements seeking to consolidate the region

On solution of the integral equations for the potential problems of two circular-strips

Directory of Open Access Journals (Sweden)

C. Sampath

1988-01-01

Dirichlet and Newmann boundary value problems of two equal infinite coaxial circular strips in various branches of potential theory. For illustration, these solutions are applied to solve some boundary value problems in electrostatics, hydrodynamics, and expressions for the physical quantities of interest are derived.

An interdisciplinary perspective on industrial energy efficiency

International Nuclear Information System (INIS)

Palm, Jenny; Thollander, Patrik

2010-01-01

This paper combines engineering and social science approaches to enhance our understanding of industrial energy efficiency and broaden our perspective on policy making in Europe. Sustainable development demands new strategies, solutions, and policy-making approaches. Numerous studies of energy efficiency potential state that cost-effective energy efficiency technologies in industry are not always implemented for various reasons, such as lack of information, procedural impediments, and routines not favoring energy efficiency. Another reason for the efficiency gap is the existence of particular values, unsupportive of energy efficiency, in the dominant networks of a branch of trade. Analysis indicates that different sectors of rather closed communities have established their own tacit knowledge, perceived truths, and routines concerning energy efficiency measures. Actors in different industrial sectors highlight different barriers to energy efficiency and why cost-effective energy efficiency measures are not being implemented. The identified barriers can be problematized in relation to the social context to understand their existence and how to resolve them.

Economic and environmental advantages for the utilization of the industrial potential of cogeneration in Mexico; Ventajas economicas y ambientales para el aprovechamiento del potencial industrial de cogeneracion en Mexico

Energy Technology Data Exchange (ETDEWEB)

Leon de los Santos, G [Division de Estudios Posgrado, Facultad de ingenieria, Universidad Nacional Autonoma de Mexico, Mexico, D.F. (Mexico)

2003-01-15

Mexico has an industrial cogeneration potential very important, not evaluated or projected within its historical growth. The objective of the present work consist of studying the industrial cogeneration potential that exists in Mexico, as well as the economic and environmental savings that it would be achieved if one took advantage of this potential. As a result of the present work we can conclude that the cogeneration in Mexico offers a theoretical potential middle of 28,000 MWe to the 2007. It is estimated an economic saving potential in the construction of generation infrastructure electrical, for the high stage of its utilization of almost 7000 million dollars and a stage of emissions reduction of 2007- 21.4%, instead of 2007- 0.35%, for the industrial sector of the country. Provided that change the vision of the government of seeing to the cogeneration as a measure of energy saving and substitute it by that of political of complement to the development of the national electrical sector. [Spanish] Mexico tiene un importante potencial de cogeneracion industrial que no ha sido evaluado ni proyectado dentro de su crecimiento historico, por ello, el objetito de este trabajo consiste en estudiar y conocer los ahorros economicos y ambientales que se podrian lograr si se aprovechara dicho potencial. Como resultado, se muestra que la cogeneracion en Mexico ofrece un potencial teorico medio de 28,000 MW e al ano 2007. Se estima tambien un ahorro economico en la construccion de infraestructura de generacion electrica para el escenario alto de su aprovechamiento de casi 7000 mdd, y un escenario de reduccion de emisiones para el sector industrial del pais de un 0.35% a un 21.47% para el ano 2007. Estos pronosticos se pueden lograr, siempre y cunado el gobierno cambie la vision de manejar este tema como una medida de ahorro de energia, y la sustituya por la politica de complemento al desarrollo del sector electrico nacional.

Increasing the industrial potential of a region as a factor of improving the region’s competitiveness

Directory of Open Access Journals (Sweden)

Lidiya Viktorovna Shamray

2015-09-01

Full Text Available Objective to determine the factors of increasing the region competitiveness by defining the industrial potential of its enterprises. Methods in the research the systemic structural functional situational economic analysis was widely used as well as modelling of the economic entities functioning. The main modeling method used in this work is the model of breakeven point widely known and tested in many enterprises. The dependence proposed by the author is of analytical character. Results the article considers different approaches to the definition of competitiveness the effect of the factors is described. The industrial potential of the enterprises is presented as one of the factors of regional competitiveness. The difference is described between the competitive advantage in commercial and production activities. The author suggests a methodology allowing to evaluate the competitiveness of industrial enterprises through the performance of production capacity the possibility of making managerial decisions based on the results of its application the results of the model testing are present. The possibility of applying the model at the regional level is shown. Scientific novelty the article presents the authorrsquos method allowing to calculate the potential growth of the enterprises competitiveness using the output capacities as the difference between the maximum and actual values of capacity. Practical significance the use of models in the practice of the company allows to evaluate the enterprise competitiveness identifying the marginal productivity of the equipment. Once it has been reached the questions arise how long the company will remain competitive in achieving 100 capacity utilization selection of areas of extensive growth due to the fact that the limits of intensive growth have been achieved. Testing of the model was carried out at the Volgograd baking enterprises it showed a high accuracy of the calculation the deviation of calculated

Inventory and Policy Reduction Potential of Greenhouse Gas and Pollutant Emissions of Road Transportation Industry in China

Directory of Open Access Journals (Sweden)

Ye Li

2016-11-01

Full Text Available In recent years, emissions from the road transportation industry in China have been increasing rapidly. To evaluate the reduction potential of greenhouse gas and pollutant emissions of the industry in China, its emission inventory was calculated and scenario analysis was created for the period between 2012 and 2030 in this paper. Based on the Long-range Energy Alternatives Planning System (LEAP model, the development of China’s road transportation industry in two scenarios (the business-as-usual (BAU scenario and the comprehensive-mitigation (CM scenario was simulated. In the Comprehensive Mitigation scenario, there are nine various measures which include Fuel Economy Standards, Auto Emission Standards, Energy-saving Technology, Tax Policy, Eco-driving, Logistics Informatization, Vehicle Liquidation, Electric Vehicles, and Alternative Fuels. The cumulative energy and emission reductions of these specific measures were evaluated. Our results demonstrate that China’s road transportation produced 881 million metric tons of CO2 and emitted 1420 thousand tons of CO, 2150 thousand tons of NOx, 148 thousand tons of PM10, and 745 thousand tons of HC in 2012. The reduction potential is quite large, and road freight transportation is the key mitigation subsector, accounting for 85%–92% of the total emission. For energy conservation and carbon emission mitigation, logistics informatization is the most effective method, potentially reducing 1.80 billion tons of coal equivalent and 3.83 billion tons of CO2 from 2012 to 2030. In terms of air pollutant emission mitigation, the auto emission standards measure performs best with respect to NOx, PM10, and HC emission mitigation, and logistic informatization measure is the best in CO emission reduction. In order to maximize the mitigation potential of China’s road transportation industry, the government needs to implement various measures in a timely and strict fashion.

The potential of natural gas use including cogeneration in large-sized industry and commercial sector in Peru

International Nuclear Information System (INIS)

Gonzales Palomino, Raul; Nebra, Silvia A.

2012-01-01

In recent years there have been several discussions on a greater use of natural gas nationwide. Moreover, there have been several announcements by the private and public sectors regarding the construction of new pipelines to supply natural gas to the Peruvian southern and central-north markets. This paper presents future scenarios for the use of natural gas in the large-sized industrial and commercial sectors of the country based on different hypotheses on developments in the natural gas industry, national economic growth, energy prices, technological changes and investment decisions. First, the paper estimates the market potential and characterizes the energy consumption. Then it makes a selection of technological alternatives for the use of natural gas, and it makes an energetic and economic analysis and economic feasibility. Finally, the potential use of natural gas is calculated through nine different scenarios. The natural gas use in cogeneration systems is presented as an alternative to contribute to the installed power capacity of the country. Considering the introduction of the cogeneration in the optimistic–advanced scenario and assuming that all of their conditions would be put into practice, in 2020, the share of the cogeneration in electricity production in Peru would be 9.9%. - Highlights: ► This paper presents future scenarios for the use of natural gas in the large-sized industrial and commercial sectors of Peru. ► The potential use of natural gas is calculated through nine different scenarios.► The scenarios were based on different hypotheses on developments in the natural gas industry, national economic growth, energy prices, technological changes and investment decisions. ► We estimated the market potential and characterized the energy consumption, and made a selection of technological alternatives for the use of natural gas.

Displacement potential solution of a guided deep beam of composite materials under symmetric three-point bending

Science.gov (United States)

Rahman, M. Muzibur; Ahmad, S. Reaz

2017-12-01

An analytical investigation of elastic fields for a guided deep beam of orthotropic composite material having three point symmetric bending is carried out using displacement potential boundary modeling approach. Here, the formulation is developed as a single function of space variables defined in terms of displacement components, which has to satisfy the mixed type of boundary conditions. The relevant displacement and stress components are derived into infinite series using Fourier integral along with suitable polynomials coincided with boundary conditions. The results are presented mainly in the form of graphs and verified with finite element solutions using ANSYS. This study shows that the analytical and numerical solutions are in good agreement and thus enhances reliability of the displacement potential approach.

Industrial applications and current trends in supercritical fluid technologies

OpenAIRE

Gamse Thomas

2005-01-01

Supercritical fluids have a great potential for wide fields of processes Although CO2 is still one of the most used supercritical gases, for special purposes propane or even fluorinated-chlorinated fluids have also been tested. The specific characteristics of supercritical fluids behaviour were analyzed such as for example the solubilities of different components and the phase equilibria between the solute and solvent. The application at industrial scale (decaffeinating of tea and coffee, hop...

Ground state solutions for Choquard type equations with a singular potential

Directory of Open Access Journals (Sweden)

Tao Wang

2017-02-01

Full Text Available This article concerns the Choquard type equation $$ -\\Delta u+V(xu=\\Big(\\int_{\\mathbb{R}^N}\\frac{|u(y|^p}{|x-y|^{N-\\alpha}}dy\\Big |u|^{p-2}u,\\quad x\\in \\mathbb{R}^N, $$ where $N\\geq3$, $\\alpha\\in ((N-4_+,N$, $2\\leq p <(N+\\alpha/(N-2$ and V(x is a possibly singular potential and may be unbounded below. Applying a variant of the Lions' concentration-compactness principle, we prove the existence of ground state solution of the above equations.

Mass transfer of a neutral solute in porous microchannel under streaming potential.

Science.gov (United States)

Mondal, Sourav; De, Sirshendu

2014-03-01

The mass transport of a neutral solute in a porous wall, under the influence of streaming field, has been analyzed in this study. The effect of the induced streaming field on the electroviscous effect of the fluid for different flow geometries has been suitably quantified. The overall electroosmotic velocity profile and expression for streaming field have been obtained analytically using the Debye-Huckel approximation, and subsequently used in the analysis for the mass transport. The analysis shows that as the solution Debye length increases, the strength of the streaming field and, consequently, the electroviscous effect diminishes. The species transport equation has been coupled with Darcy's law for quantification of the permeation rate across the porous wall. The concentration profile inside the mass transfer boundary layer has been solved using the similarity transformation, and the Sherwood number has been calculated from the definition. In this study, the variation of the permeation rate and solute permeate concentration has been with the surface potential, wall retention factor and osmotic pressure coefficient has been demonstrated for both the circular as well as rectangular channel cross-section. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Zeolites as alcohol adsorbents from aqueous solutions

Directory of Open Access Journals (Sweden)

Cekova Blagica

2006-01-01

Full Text Available The potential usage of zeolites as adsorbents for the removal of organic molecules from water was investigated in a series of experiments with aqueous solutions of lower alcohols. This could represent a simple solution to the problem of cleaning up industrial wastewater as well as recovering valuable chemicals at relatively low costs. Adsorption isotherms of the Langmuir type were applied, and calculations showed that the amount of propanol adsorbed on silicalite corresponded to approximately 70% of the pore volume. The adsorption process is simple, and recovery of the more concentrated products is easily done by heat treatment and/or at lowered pressures. Adsorption experiments with aqueous acetone showed that silicalite had approximately the same adsorption capacity for acetone as for n-propanol. Heats of adsorption were determined calorimetrically.

Potential use of germicides in vase solutions for gladiolus ‘White Friendship’

Directory of Open Access Journals (Sweden)

Maria Carolina Casares

2017-03-01

Full Text Available Gladiolus (Gladiolus x hortulanus is one of the most important crops for cut flowers worldwide, however having a short longevity. Usually, stems are harvested at the bud stage and need water and carbohydrates to support inflorescence development and to ensure flower quality. Vase solutions can supply these elements. However, sugars may benefit bacterial proliferation, which eventually can block xylem vessels. Bactericides potentially inhibit microorganism proliferation and new compounds are being tested constantly. This experiment was conducted to evaluate ‘White Friendship’ cut gladiolus performance in vase solutions with sodium dichloroisocyanurate dihydrate (Na-DCC, 8-hydroxyquinoline (8-HQ or polymeric biguanide (PB. Inflorescences harvested at commercial maturity were placed in distilled water with 4% w/v of sucrose plus the germicides and kept under ambient conditions. Vase life, inflorescence postharvest development, fresh mass, membrane stability index and water relations were evaluated. There were no visual symptoms of toxicity in the treatments. The highest values of vase life, fully-open flowers, fresh mass and water balance were obtained with the Na-DCC treatment. Inflorescences treated with 8-HQ exhibited the highest values of solution uptake and wilting flowers. PB had a limited effect in gladiolus postharvest since the obtained results were similar to the sucrose alone. There was no effect of germicides on membrane stability index and its reduction was due to flower senescence progress only. Vase solution with Na-DCC plus sucrose improved water balance, increased open flowers, reduced wilting of flowers and fresh mass loss. Therefore, vase solutions with sucrose 4% w/v and Na-DCC enhance postharvest quality of cut gladiolus inflorescences.

Design – key element of creative industries in Romania and its role in Romanian export

Directory of Open Access Journals (Sweden)

Costin LIANU

2012-06-01

Full Text Available Creative industries are now considered a solution for sustainable development. EU 2020 strategy is considering these industries crucial for the future industrial policy of EU. In recent years, while some European countries or even  regions and cities, such as the UK, Scandinavian countries cities like  Barcelona, Tallinn, Copenhagen or Amsterdam to name a few, have been good at tapping into the extraordinary potential of the cultural and creative sectors as a way to promote socioeconomic development and progressively developed ad hoc strategies, others are only just starting. Present papers is aiming at evaluating potential of these industries in Romania, with focus on design, and their possible place in the future export development of the country. Where strategies have emerged, they tend to focus on the strengthening of these sectors and not yet on stimulating partnerships and spill-overs with other sectors.

Designing Integrated Product- Service System Solutions in Manufacturing Industries

DEFF Research Database (Denmark)

Costa, Nina; Patrício, Lia; Morelli, Nicola

2015-01-01

Manufacturing firms are increasingly evolving towards the design of integrated product-service solutions but servitization literature does not provide specific guidance on how to design these integrated solutions. Building upon ProductService System (PSS) and Service Design (SD) approaches...... how it brings new insights to manufacturing companies moving to a service, value cocreation perspective....

Repassivation potentials determination of crevice corrosion of alloy in Chloride solutions

International Nuclear Information System (INIS)

Rincon Ortiz, Mauricio

2009-01-01

Alloy 22 (UNS N06022) belongs to the Ni-Cr-Mo family and it is highly resistant to general and localized corrosion, but it may suffer crevice corrosion in aggressive environmental conditions, such as high chloride concentration, high applied potential and high temperature. Alloy 22 is one of the candidates to be considered for the outer corrosion-resistant shell of high-level nuclear waste containers. It is assumed that localized corrosion will only occur when the corrosion potential (E CORR ) is equal or higher than the crevice corrosion repassivation potential (E R,CREV ). This parameter is obtained by different electrochemical techniques using artificially creviced specimens. These techniques include cyclic potentiodynamic polarization (CPP) curves, Tsujikawa-Hisamatsu electrochemical (THE) method or other non-standardized methods. Recently, as a variation of THE method, the PD-GS-PD technique was introduced. The aim of the present work was to determine reliable critical potentials for crevice corrosion of Alloy 22 in pure chloride solutions at 90 C degrees. Conservative methodologies (which include extended potentiostatic steps) were applied for determining protection potentials below which crevice corrosion cannot initiate and propagate. Results from PD-GS-PD technique were compared with those from these methodologies in order to assess their reliability. Results from the CPP and the THE methods were also considered for comparison. The repassivation potentials from the PD-GS-PD technique were conservative and reproducible, and they did not depend on the amount of previous crevice corrosion propagation in the studied conditions. (author)

Assessment of Energy Efficiency Improvement and CO₂ Emission Reduction Potentials in the Cement Industry in China

Energy Technology Data Exchange (ETDEWEB)

Hasanbeigi, Ali [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Morrow, William [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Masanet, Eric [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sathaye, Jayant [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Xu, Tengfang [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2012-06-15

China’s annual cement production (i.e., 1,868 Mt) in 2010 accounted for nearly half of the world’s annual cement production in the same year. We identified and analyzed 23 energy efficiency technologies and measures applicable to the processes in the cement industry. The Conservation Supply Curve (CSC) used in this study is an analytical tool that captures both the engineering and the economic perspectives of energy conservation. Using a bottom-up electricity CSC model, the cumulative cost-effective electricity savings potential for the Chinese cement industry for 2010-2030 is estimated to be 251 TWh, and the total technical electricity saving potential is 279 TWh. The CO₂ emissions reduction associated with cost-effective electricity savings is 144 Mt CO₂ and the CO₂ emission reduction associated with technical electricity saving potential is 161 Mt CO₂. The fuel CSC model for the cement industry suggests cumulative cost-effective fuel savings potential of 4,326 PJ which is equivalent to the total technical potential with associated CO₂ emission reductions of 406 Mt CO₂. In addition, a sensitivity analysis with respect to the discount rate used is conducted to assess the effect of changes in this parameter on the results. We also developed a scenario in which instead of only implementing the international technologies in 2010-2030, we implement both international and Chinese domestic technologies during the analysis period and calculate the saving and cost of conserved energy accordingly. The result of this study gives a comprehensive and easy to understand perspective to the Chinese cement industry and policy makers about the energy efficiency potential and its associated cost.

A convergent iterative solution of the quantum double-well potential

International Nuclear Information System (INIS)

Friedberg, R.; Lee, T.D.; Zhao, W.Q.; Cimenser, A.

2001-01-01

We present a new convergent iterative solution for the two lowest quantum wave functions ψ ev and ψ od of the Hamiltonian with a quartic double-well potential V in one dimension. By starting from a trial function, which is by itself the exact lowest even or odd eigenstate of a different Hamiltonian with a modified potential V+δV, we construct the Green's function for the modified potential. The true wave functions, ψ ev or ψ od , then satisfy a linear inhomogeneous integral equation, in which the inhomogeneous term is the trial function, and the kernel is the product of the Green's function times the sum of δV, the potential difference, and the corresponding energy shift. By iterating this equation we obtain successive approximations to the true wave function; furthermore, the approximate energy shift is also adjusted at each iteration so that the approximate wave function is well behaved everywhere. We are able to prove that this iterative procedure converges for both the energy and the wave function at all x. The effectiveness of this iterative process clearly depends on how good the trial function is, or equivalently, how small the potential difference δV is. Although each iteration brings a correction smaller than the previous one by a factor proportional to the parameter that characterizes the smallness of δV, it is not a power series expansion in the parameter. The exact tunneling information of the modified potential is, of course, contained in the Green's function; by adjusting the kernel of the integral equation via the energy shift at each iteration, we bring enough of this information into the calculation so that each approximate wave function is exponentially tuned. This is the underlying reason why the present method converges, while the usual power series expansion does not

A study of the potential of plasma processing in the chemical industry

International Nuclear Information System (INIS)

Estey, P.N.; Connolly, T.J.

1984-01-01

This work describes a systematic approach to determine the potential for plasma processing in the United States chemical industry. A model was developed that describes the physical inputs and outputs from a plasma based processing system. Based on these mass flows and the energy flows to the processor an economic assessment of the plasma processing system is made. This economic assessment which also includes the capital costs of the processor, can be used to determine if the plasma system is competitive with the conventional system

Modelling and Enhancement of Organizational Resilience Potential in Process Industry SMEs

Directory of Open Access Journals (Sweden)

Slavko Arsovski

2015-12-01

Full Text Available The business environment is rapidly changing and puts pressure on enterprises to find effective ways to survive and develop. Since it is almost impossible to identify the multitude of complex conditions and business risks, an organization has to build its resilience in order to be able to overcome issues and achieve long term sustainability. This paper contributes by establishing a two-step model for assessment and enhancement of organizational resilience potential oriented towards Small and Medium Enterprises (SMEs in the process industry. Using a dynamic modelling technique and statistical tools, a sample of 120 SMEs in Serbia has been developed as a testing base, and one randomly selected enterprise was used for model testing and verification. Uncertainties regarding the relative importance of organizational resilience potential factors (ORPFs and their value at each level of business are described by pre-defined linguistic expressions. The calculation of the relative importance of ORPFs for each business level is stated as a fuzzy group decision making problem. First, the weighted ORPFs’ values and resilience potential at each business level are determined. In the second step, near optimal enhancement of ORPFs’ values is achieved by applying a genetic algorithm (GA.

Unified Treatment of a Class of Spherically Symmetric Potentials: Quasi-Exact Solution

International Nuclear Information System (INIS)

Baradaran, M.; Panahi, H.

2016-01-01

We investigate the Schrödinger equation for a class of spherically symmetric potentials in a simple and unified manner using the Lie algebraic approach within the framework of quasi-exact solvability. We illustrate that all models give rise to the same basic differential equation, which is expressible as an element of the universal enveloping algebra of sl(2). Then, we obtain the general exact solutions of the problem by employing the representation theory of sl(2) Lie algebra.

Infinitely many solutions for sublinear fractional Schrodinger-type equations with general potentials

Directory of Open Access Journals (Sweden)

Gang-Ling Hou

2018-04-01

Full Text Available This article concerns the fractional Schrodinger type equations $$ (-\\Delta^\\alpha u+V(xu =f(x,u \\quad\\text{in } \\mathbb{R}^N, $$ where $N\\geq 2$, $\\alpha\\in(0,1$, $(-\\Delta^\\alpha$ stands for the fractional Laplacian, $V$ is a positive continuous potential, $f\\in C(\\mathbb{R}^N\\times\\mathbb{R},\\mathbb{R}$. We establish criteria that guarantee the existence of infinitely many solutions by using the genus properties in critical point theory.

[Computer modeling the hydrostatic pressure characteristics of the membrane potential for polymeric membrane, separated non-homogeneous electrolyte solutions].

Science.gov (United States)

Slezak, Izabella H; Jasik-Slezak, Jolanta; Rogal, Mirosława; Slezak, Andrzej

2006-01-01

On the basis of model equation depending the membrane potential deltapsis, on mechanical pressure difference (deltaP), concentration polarization coefficient (zetas), concentration Rayleigh number (RC) and ratio concentration of solutions separated by membrane (Ch/Cl), the characteristics deltapsis = f(deltaP)zetas,RC,Ch/Cl for steady values of zetas, RC and Ch/Cl in single-membrane system were calculated. In this system neutral and isotropic polymeric membrane oriented in horizontal plane, the non-homogeneous binary electrolytic solutions of various concentrations were separated. Nonhomogeneity of solutions is results from creations of the concentration boundary layers on both sides of the membrane. Calculations were made for the case where on a one side of the membrane aqueous solution of NaCl at steady concentration 10(-3) mol x l(-1) (Cl) was placed and on the other aqueous solutions of NaCl at concentrations from 10(-3) mol x l(-1) to 2 x 10(-2) mol x l(-1) (Ch). Their densities were greater than NaCl solution's at 10(-3) mol x l(-1). It was shown that membrane potential depends on hydrodynamic state of a complex concentration boundary layer-membrane-concentration boundary layer, what is controlled by deltaP, Ch/Cl, RC and zetas.

Magnetic field effects on the open circuit potential of ferromagnetic electrodes in corroding solutions.

Science.gov (United States)

Dass, Amala; Counsil, Joseph A; Gao, Xuerong; Leventis, Nicholas

2005-06-02

Magnetic fields shift the open circuit potential (OCP) of ferromagnetic electrodes (Fe, Co, and Ni) in corroding solutions. The OCP changes we observe (a) follow the series Fe>Co>Ni; (b) increase with the magnetic flux density; (c) reach a maximum with disk electrodes approximately 1 mm in diameter; and (d) depend on the orientation of the electrode. We report that when the surface of the electrode is oriented parallel (theta = 90 degrees) or perpendicular (theta = 0 degrees) to the magnetic field, the open circuit potential moves in opposite directions (positive and negative, respectively) with the largest changes occurring when the electrode surface is parallel to the magnetic field. Nonconvective sleeve electrodes produce the same behavior. The overall experimental evidence suggests that the magnetic field changes the OCP by modifying the surface concentrations of the paramagnetic participants in the corrosion process of the ferromagnetic electrode by species in solution; this in turn is accomplished by imposing a field-gradient driven mode of mass transfer upon paramagnetic species in solution (magnetophoresis). Simulations of the magnetic field around the ferromagnetic electrode at the two extreme orientations considered here show that in one case (theta = 90 degrees) field gradients actually repel, while in the other case (theta = 0 degrees) they attract paramagnetic species in the vicinity of the electrode.

Higher-order rogue wave-like solutions for a nonautonomous nonlinear Schrödinger equation with external potentials

Science.gov (United States)

Liu, Lei; Tian, Bo; Wu, Xiao-Yu; Sun, Yan

2018-02-01

Under investigation in this paper is the higher-order rogue wave-like solutions for a nonautonomous nonlinear Schrödinger equation with external potentials which can be applied in the nonlinear optics, hydrodynamics, plasma physics and Bose-Einstein condensation. Based on the Kadomtsev-Petviashvili hierarchy reduction, we construct the Nth order rogue wave-like solutions in terms of the Gramian under the integrable constraint. With the help of the analytic and graphic analysis, we exhibit the first-, second- and third-order rogue wave-like solutions through the different dispersion, nonlinearity and linear potential coefficients. We find that only if the dispersion and nonlinearity coefficients are proportional to each other, heights of the background of those rogue waves maintain unchanged with time increasing. Due to the existence of complex parameters, such nonautonomous rogue waves in the higher-order cases have more complex features than those in the lower.

Molasses crisis in the Puerto Rico rum industry

Energy Technology Data Exchange (ETDEWEB)

Samuels, G

1980-01-01

In 1978 the Puerto Rico rum industry provided 85% of the US rum market, returning to the PR treasury $200 million in Federal excise taxes. The diminishing P.R. sugar industry is not able to supply sufficient blackstrap molasses (BSM) to the expanding P.R. rum industry, and at present imports from foreign suppliers amount to 88% of its needs. These imports place the rum industry in jeopardy, as these suppliers can boycott Puerto Rico to protect their own rum production, or they can insist by treaty that all rums claiming geographic origin (i.e., Puerto Rico rum) must be distilled from molasses produced in that country. Possible solutions to improve domestic molasses production are presented to eliminate these threats. The use of high-test molasses (HTM) would answer the present and future needs of the rum industry if produced by the energy cane (or biomass) concept. This is a management concept stressing total growth potential rather than sugar. It would permit doubling cane production per acre and produce sufficient HTM on 70,000 acres for the projected rum industry requirements. Considerations of HTM production show that problems exist with the marketing price rather than in the field or factory. The economics of HTM pricing will have to be worked out by the interested parties: the rum industry, the sugar industry, and the government.

PACS industry in Korea

Science.gov (United States)

Kim, Hee-Joung

2002-05-01

PACS industry in Korea has been rapidly growing, since government had supported collaborative PACS project between industry and university hospital. In the beginning, PACS industry had focused on developing peripheral PACS solutions, while the Korea PACS society was being formed. A few companies had started developing and installing domestic large-scale full-PACS system for teaching hospitals. Several years later, many hospitals have installed full-PACS system with national policy of reimbursement for PACS exams in November 1999. Both experiences of full-PACS installation and national policy generated tremendous intellectual and technological expertise about PACS at all levels, clinical, hospital management, education, and industrial sectors. There are now more than 20 domestic PACS companies. They have enough experiences which are capable of installing a truly full-PACS system for large-scale teaching hospitals. As an example, a domestic company had installed more than 40 full-PACS systems within 2-3 years. Enough experiences of full-PACS installation in Korea lead PACS industry to start exporting their full-PACS solutions. However, further understanding and timely implementation of continuously evolving international standard and integrated healthcare enterprise concepts may be necessary for international leading of PACS technologies for the future.

Mechatronics ideas, challenges, solutions and applications

CERN Document Server

Kaliński, Krzysztof; Szewczyk, Roman; Kaliczyńska, Małgorzata

2016-01-01

This book presents recent advances and developments in control, automation, robotics, and measuring techniques. It presents contributions of top experts in the fields, focused on both theory and industrial practice. In particular the book is devoted to new ideas, challenges, solutions and applications of Mechatronics. The particular chapters present a deep analysis of a specific technical problem which is in general followed by a numerical analysis and simulation, and results of an implementation for the solution of a real world problem. The presented theoretical results, practical solutions and guidelines will be useful for both researchers working in the area of engineering sciences and for practitioners solving industrial problems. .

Economic and environmental advantages for the use of the industrial potential of cogeneration in Mexico City; Ventajas economicas y ambientales para el aprovechamiento del potencial industrial de cogeneracion en Mexico

Energy Technology Data Exchange (ETDEWEB)

Leon de los Santos, G. [Division de Estudios de Posgrado, Facultad de Ingenieria, UNAM, Mexico, D.F. (Mexico)

2003-03-01

Mexico has an industrial cogeneration potential very important, not evaluated or projected within its historical growth. The objective of the present work consist of studying the industrial cogeneration potential that exists in Mexico, as well as the economic and environmental savings that it would be achieved if one took advantage of this potential. As a result of the present work we can conclude that the cogeneration in Mexico offers a theoretical potential middle of 28,000 MWe to the 2007. It is estimated an economic saving potential in the construction of generation infrastructure electrical, for the high stage of its utilization of almost 7000 million of dollars and a stage of emissions reduction of 2007- 21.37% instead of 2007- 0.35% for the industrial sector of the country. These prognoses can be obtained, as long as the government changes vision to handle this subject as a measure of energy saving, and substitute it by the policy of complement the development of the national electrical sector. [Spanish] Mexico tiene un importante potencial de cogeneracion industrial que no ha sido evaluado ni proyectado dentro de su crecimiento historico, por ello, el objetivo de este trabajo consiste en estudiar y conocer los ahorros economicos y ambientales que se podrian lograr si se aprovechara dicho potencial. Como resultado, se muestra que la cogeneracion en Mexico ofrece un potencial teorico medio de 28,000 MWe al ano 2007. Se estima tambien un ahorro economico en la construccion de infraestructura de generacion electrica para el escenario alto de su aprovechamiento de casi 7 000 mdd, y un escenario de reduccion de emisiones para el sector industrial del pais de un 0.35% a un 21.4% para el ano 2007. Estos pronosticos se pueden lograr, siempre y cuando el gobierno cambie la vision de manejar este tema como una medida de ahorro de energia, y la sustituya por la politica de complemento al desarrollo del sector electrico nacional.

40 CFR Table 5 to Subpart Jj of... - List of VHAP of Potential Concern Identified by Industry

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 10 2010-07-01 2010-07-01 false List of VHAP of Potential Concern Identified by Industry 5 Table 5 to Subpart JJ of Part 63 Protection of Environment ENVIRONMENTAL PROTECTION.... 63, Subpt. JJ, Table 5 Table 5 to Subpart JJ of Part 63—List of VHAP of Potential Concern Identified...

Assessment of Food Processing and Pharmaceutical Industrial Wastes as Potential Biosorbents: A Review

OpenAIRE

El-Sayed, Hanan E. M.; El-Sayed, Mayyada M. H.

2014-01-01

There is a growing need for the use of low-cost and ecofriendly adsorbents in water/wastewater treatment applications. Conventional adsorbents as well as biosorbents from different natural and agricultural sources have been extensively studied and reviewed. However, there is a lack of reviews on biosorption utilizing industrial wastes, particularly those of food processing and pharmaceuticals. The current review evaluates the potential of these wastes as biosorbents for the removal of some ha...

The medical-industrial complex, professional medical associations, and continuing medical education.

Science.gov (United States)

Schofferman, Jerome

2011-12-01

Financial relationships among the biomedical industries, physicians, and professional medical associations (PMAs) can be professional, ethical, mutually beneficial, and, most importantly, can lead to improved medical care. However, such relationships, by their very nature, present conflicts of interest (COIs). One of the greatest concerns regarding COI is continuing medical education (CME), especially because currently industry funds 40-60% of CME. COIs have the potential to bias physicians in practice, educators, and those in leadership positions of PMAs and well as the staff of a PMA. These conflicts lead to the potential to bias the content and type of CME presentations and thereby influence physicians' practice patterns and patient care. Physicians are generally aware of the potential for bias when industry contributes funding for CME, but they are most often unable to detect the bias. This may because it is very subtle and/or the educators themselves may not realize that they have been influenced by their relationships with industry. Following Accreditation Council for Continuing Medical Education guidelines and mandating disclosure that is transparent and complete have become the fallback positions to manage COIs, but such disclosure does not really mitigate the conflict. The eventual and best solutions to ensure evidence-based education are complete divestment by educators and leaders of PMAs, minimal and highly controlled industry funding of PMAs, blind pooling of any industry contributions to PMAs and CME, strict verification of disclosures, clear separation of marketing from education at CME events, and strict oversight of presentations for the presence of bias. Wiley Periodicals, Inc.

Estimation of the small-scale gas turbine potential in the industry in the Netherlands and demands and wishes for the application of gas turbines. Raming kleinschalig gasturbine-potentieel in de industrie in Nederland en eisen en wensen bij toepassing

Energy Technology Data Exchange (ETDEWEB)

1994-08-30

The title estimation concerns gas turbines for the market sector [<=]8 tons of steam per hour. In the first part of the survey an estimation is made of the market potential in the segment to circa 5 MWth steam capacity, and a selection of sectors with the largest potential on the basis of the number of installed steam boilers to 5 MWth. In the second part of this survey the demands and the wishes, that users and energy utilities have when applying the gas turbines, are outlined, as well as the bottlenecks for the penetration of the market. Data were collected from interviews with producers, suppliers and packagers of installations, industrial users in five different sectors, representatives of energy utilities, consultants and cogeneration experts. In the appendices attention is paid to the market potential for five industries: meat industry and slaughterhouses, the dairy industry, food industry (bread, biscuit, pastry, cookies, etc.), cattle feed industry, and the synthetic resin industry.7 figs., 4 tabs., 6 appendices, 42 refs.

A review of the industrial and recent potential applications of trioctylphosphine oxide

International Nuclear Information System (INIS)

Watson, E.K.; Rickelton, W.A.

1992-01-01

The industrial applications of trioctylphosphine oxide, more commonly known as TOPO, make use of its complexing powers with metals and with hydrogen donor organic compounds. Commercial uses as a solvent extraction reagent are in the recovery of uranium from wet process phosphoric acid and in the recovery of byproduct acetic acid and furfural generated during sulphite wood pulping. Recently investigated potential uses include the separation of niobium from tantalum and the extraction of organic compounds, such as citric acid, from fermentation broths. Each process is discussed briefly. 29 refs., 2 figs

Industrial Consumers’ Smart Grid Adoption: Influential Factors and Participation Phases

Directory of Open Access Journals (Sweden)

Zheng Ma

2018-01-01

Full Text Available The participation of industrial consumers in smart grid transition is important due to their consumption footprint, heavy energy use and complexity in the implementation of smart energy technologies. Active involvement of industrial consumers in the development of smart grid solutions is important to ensure the energy system transformation. Despite the importance of industrial consumers has been identified, the empirical studies on the smart grid still mainly address residential and commercial consumers. Therefore, based on four case studies with two industrial consumers, one energy consulting company and one electricity retailer, this paper investigates the factors that influence industrial consumers’ acceptance of smart grid solutions, and how the influential factors are relevant to the smart grid adoption phases. Eleven influential factors are identified that impact on four stages for industrial consumers’ adoption of smart grid solutions (inscription, translation, framing, and stabilization stages. The eleven influential factors are: awareness of multiple contexts, shared support, return-of-investment, ease of use, flexibility and dynamic pricing, liberalization and energy tariff structure, customer focus, solution integration, process improvement, service quality, and company’s green image.

Collaborative ReTek exchange - An innovative solution to the skills and resource shortage in the nuclear industry - 16396

International Nuclear Information System (INIS)

Parr, Corhyn

2009-01-01

A Different Approach to the Skills and Resource Shortage The Nuclear Industry has for many years been concerned about a skills and resource shortage. This has been due to a poor perception of the industry by those on the outside, highly competitive industries vying for the same resource pool, a steep retirement curve for highly qualified staff and a lack of graduates entering industry. Here in the UK the creation of the National Skill Academy for Nuclear (NSAN) has put in place a framework to record skills and look to accredit the training providers in the nuclear industry to ensure that the correct skills for the future are available. This has gone some way to solving the skills problem and developing a well recognised accredited system but what about resource - where are the additional qualified resources going to be found? Part of the Solution - A Resource Exchange. How do we solve the skills shortage? We come together as an industry and share the available resource through a collaborative resource exchange. It has been done before in the IT industry when rates for specialists hit Pounds 1500 per day and recruitment agencies were charging extortionate fees for providing temporary resource. ReTek Consulting have developed the ReTek Resource Exchange to provide a neutral collaborative platform across the supply chain; from large scale infrastructure companies and joint venture platforms through to small companies and independent consultants. Using the ReTek Exchange permanent staff are made available to work for others during periods of under-utilisation. Links with similar highly regulated industries enable further management of peaks and troughs and a growth in experienced nuclear professionals through focused training and development. The Benefits of the ReTek Exchange are: - Increased utilisation of your current workforce. - Shared cost of permanent staff. - Speedy access to staff available in your region. - Reduced need for contract or agency staff. - Access

Mechatronics ideas for industrial application

CERN Document Server

Szewczyk, Roman; Trojnacki, Maciej; Kaliczyńska, Małgorzata

2015-01-01

This book presents recent advances and developments in control, automation, robotics, and measuring techniques. It presents contributions of top experts in the fields, focused on both theory and industrial practice. The particular chapters present a deep analysis of a specific technical problem which is in general followed by a numerical analysis and simulation, and results of an implementation for the solution of a real world problem. The presented theoretical results, practical solutions and guidelines will be useful for both researchers working in the area of engineering sciences and for practitioners solving industrial problems.  

Low-Temperature Solution Processable Electrodes for Piezoelectric Sensors Applications

Science.gov (United States)

Tuukkanen, Sampo; Julin, Tuomas; Rantanen, Ville; Zakrzewski, Mari; Moilanen, Pasi; Lupo, Donald

2013-05-01

Piezoelectric thin-film sensors are suitable for a wide range of applications from physiological measurements to industrial monitoring systems. The use of flexible materials in combination with high-throughput printing technologies enables cost-effective manufacturing of custom-designed, highly integratable piezoelectric sensors. This type of sensor can, for instance, improve industrial process control or enable the embedding of ubiquitous sensors in our living environment to improve quality of life. Here, we discuss the benefits, challenges and potential applications of piezoelectric thin-film sensors. The piezoelectric sensor elements are fabricated by printing electrodes on both sides of unmetallized poly(vinylidene fluoride) film. We show that materials which are solution processable in low temperatures, biocompatible and environmental friendly are suitable for use as electrode materials in piezoelectric sensors.

Analysis of an Air Conditioning Coolant Solution for Metal Contamination Using Atomic Absorption Spectroscopy: An Undergraduate Instrumental Analysis Exercise Simulating an Industrial Assignment

Science.gov (United States)

Baird, Michael J.

2004-01-01

A real-life analytical assignment is presented to students, who had to examine an air conditioning coolant solution for metal contamination using an atomic absorption spectroscopy (AAS). This hands-on access to a real problem exposed the undergraduate students to the mechanism of AAS, and promoted participation in a simulated industrial activity.

Eudialyte as potential industrial rare metal sources

International Nuclear Information System (INIS)

Chekmarev, A.M.; Chizhevskaya, S.V.; Masloboev, V.A.; Efremova, E.A.; Sharonov, A.V.

1989-01-01

The structural features and chemial compostion of eudialyte, zirconium silicate mineral, containing zirconium, niobium, tantalum, rare earth and other elements are considered. A brief review of studies of sulfuric acid decomposition of endialyte, including autoclave one, aimed at extraction of zirconium and other valuable components is given. The leaching methods providing a high direct zirconium yield into the solution, preparation of well-filtered pulps and permitting to realize further reprocessing of solutions by the extraction methods are discussed. 20 refs.; 4 figs

Bound state solution of Dirac equation for Hulthen plus trigonometric Rosen Morse non-central potential using Romanovski polynomial

Energy Technology Data Exchange (ETDEWEB)

Suparmi, A., E-mail: suparmiuns@gmail.com; Cari, C., E-mail: suparmiuns@gmail.com [Physics Department, Post Graduate Study, Sebelas Maret University (Indonesia); Angraini, L. M. [Physics Department, Mataram University (Indonesia)

2014-09-30

The bound state solutions of Dirac equation for Hulthen and trigonometric Rosen Morse non-central potential are obtained using finite Romanovski polynomials. The approximate relativistic energy spectrum and the radial wave functions which are given in terms of Romanovski polynomials are obtained from solution of radial Dirac equation. The angular wave functions and the orbital quantum number are found from angular Dirac equation solution. In non-relativistic limit, the relativistic energy spectrum reduces into non-relativistic energy.

Assessing consumer responses to potential reduced-exposure tobacco products: a review of tobacco industry and independent research methods.

Science.gov (United States)

Rees, Vaughan W; Kreslake, Jennifer M; Cummings, K Michael; O'Connor, Richard J; Hatsukami, Dorothy K; Parascandola, Mark; Shields, Peter G; Connolly, Gregory N

2009-12-01

Internal tobacco industry documents and the mainstream literature are reviewed to identify methods and measures for evaluating tobacco consumer response. The review aims to outline areas in which established methods exist, identify gaps in current methods for assessing consumer response, and consider how these methods might be applied to evaluate potentially reduced exposure tobacco products and new products. Internal industry research reviewed included published articles, manuscript drafts, presentations, protocols, and instruments relating to consumer response measures were identified and analyzed. Peer-reviewed research was identified using PubMed and Scopus. Industry research on consumer response focuses on product development and marketing. To develop and refine new products, the tobacco industry has developed notable strategies for assessing consumers' sensory and subjective responses to product design characteristics. Independent research is often conducted to gauge the likelihood of future product adoption by measuring consumers' risk perceptions, responses to product, and product acceptability. A model that conceptualizes consumer response as comprising the separate, but interacting, domains of product perceptions and response to product is outlined. Industry and independent research supports the dual domain model and provides a wide range of methods for assessment of the construct components of consumer response. Further research is needed to validate consumer response constructs, determine the relationship between consumer response and tobacco user behavior, and improve reliability of consumer response measures. Scientifically rigorous consumer response assessment methods will provide a needed empirical basis for future regulation of potentially reduced-exposure tobacco products and new products, to counteract tobacco industry influence on consumers, and enhance the public health.

Correlation between passive film-induced stress and stress corrosion cracking of α-Ti in a methanol solution at various potentials

International Nuclear Information System (INIS)

Guo, X.Z.; Gao, K.W.; Chu, W.Y.; Qiao, L.J.

2003-01-01

The flow stress of a specimen of α-Ti before unloading is different with the yield stress of the same specimen after unloading and forming a passive film through immersing in a methanol solution at various constant potentials. The difference is the passive film-induced stress. The film-induced stress and susceptibility to stress corrosion cracking (SCC) in the methanol solution at various potentials were measured. At the stable open-circuit potential and under anodic polarization, both film-induced tensile stress σ p and susceptibility to SCC had a maximum value. The film-induced stress and SCC susceptibility, however, decreased steeply with a decrease in potential under cathodic polarization. When the potential V≤-280 mV SCE , the film-induced stress became compressive; correspondingly, susceptibility to SCC was zero. Therefore, the variation of film-induced stress with potential was consistent with that of susceptibility to SCC. A large film-induced tensile stress is the necessary condition for SCC of α-Ti in the methanol solution. The symbol and amount of the film-induced stress were related to the compositions of the passive film, which have been analyzed using the X-ray photoelectron spectrum (XPS)

Management of routine solution gas flaring in Alberta

International Nuclear Information System (INIS)

1998-01-01

Alberta's Clean Air Strategic Alliance (CASA) shares decision-making responsibilities with the Government of Alberta for strategic aspects of air quality. In 1997, the Alliance established the Flaring Project Team to develop recommendations that address potential and observed impacts associated with flaring, with particular focus on 'upstream solution gas' flaring. The upstream industry explores for, acquires, develops, produces and markets crude oil and natural gas. Essentially, solution gas at upstream sites is 'co-produced' during crude oil production. The project team was established to collect and summarize information on flaring and its impacts and to develop recommendations for short-term actions to minimize the practice of routine flaring of solution gas. Another goal of the team is to develop a research strategy to better understand flaring emissions and their effects on human, animal and environmental health. The team is working on developing long-term strategies for actions to address the gas flaring issue. 5 refs., 1 tab., 7 figs

The potential for ore and industrial minerals in the Forsmark area

Energy Technology Data Exchange (ETDEWEB)

Lindroos, Hardy [MIRAB Mineral Resurser AB, Uppsala (Sweden); Isaksson, Hans; Thunehed, Hans [GeoVista AB, Luleaa (Sweden)

2004-03-01

A survey has been made of existing information concerning the potential for ore and industrial minerals in and near the candidate area for a deep repository in Forsmark. A deep repository for spent nuclear fuel should not be located in a rock type or an area where mineral extraction might be considered in the future, since this would make it impossible to exploit this natural resource. Avoiding such areas reduces the risk that people in the future will come into contact with the deep repository through mineral prospecting or mining activities. The survey has made use of all the geoscientific information that was compiled in the more regional investigations in Oesthammar Municipality in 1996-97. In cooperation with the Geological Survey of Sweden (SGU), a new, more detailed mineral resources map has been prepared. The map shows areas with an ore potential that may be unsuitable or unfavourable for siting of a deep repository. The results of the recently completed geophysical helicopter surveys of the Forsmark area are presented in a special chapter. The judgement of the area's ore potential is in part based on the geophysical evaluation of these measurements. Furthermore, the survey obtained information from ongoing deep drillings from the site investigation in Forsmark. In order to better be able to judge the ore potential, the survey has initiated a geochemical investigation of activated soil samples, plus an ore geology sampling of a section in the deep borehole KFM02A, where a hydrothermally altered zone was detected in 2003.The first results from these samplings are presented in the report, which also discusses prospecting efforts in the area as well as relevant Swedish mining legislation. Some suggestions are made for further ore geology investigations. The mineral resources map shows that there is an elongate northwest-southeast zone south and southwest of the candidate area which has a potential for skarn iron ore, and possibly for copper and zinc

The potential for ore and industrial minerals in the Forsmark area

International Nuclear Information System (INIS)

Lindroos, Hardy; Isaksson, Hans; Thunehed, Hans

2004-03-01

A survey has been made of existing information concerning the potential for ore and industrial minerals in and near the candidate area for a deep repository in Forsmark. A deep repository for spent nuclear fuel should not be located in a rock type or an area where mineral extraction might be considered in the future, since this would make it impossible to exploit this natural resource. Avoiding such areas reduces the risk that people in the future will come into contact with the deep repository through mineral prospecting or mining activities. The survey has made use of all the geoscientific information that was compiled in the more regional investigations in Oesthammar Municipality in 1996-97. In cooperation with the Geological Survey of Sweden (SGU), a new, more detailed mineral resources map has been prepared. The map shows areas with an ore potential that may be unsuitable or unfavourable for siting of a deep repository. The results of the recently completed geophysical helicopter surveys of the Forsmark area are presented in a special chapter. The judgement of the area's ore potential is in part based on the geophysical evaluation of these measurements. Furthermore, the survey obtained information from ongoing deep drillings from the site investigation in Forsmark. In order to better be able to judge the ore potential, the survey has initiated a geochemical investigation of activated soil samples, plus an ore geology sampling of a section in the deep borehole KFM02A, where a hydrothermally altered zone was detected in 2003.The first results from these samplings are presented in the report, which also discusses prospecting efforts in the area as well as relevant Swedish mining legislation. Some suggestions are made for further ore geology investigations. The mineral resources map shows that there is an elongate northwest-southeast zone south and southwest of the candidate area which has a potential for skarn iron ore, and possibly for copper and zinc, although

Industry potential of large scale uses for peaceful nuclear explosives

Energy Technology Data Exchange (ETDEWEB)

Russell, P L [Bureau of Mines, Denver, CO (United States)

1969-07-01

The industrial potential for peaceful uses of nuclear explosions entering a critical stage of development. Should Project Gasbuggy, an experiment to determine to what extent an underground nuclear explosion can stimulate the production of natural gas from low-permeability formations, prove a technical or economic success, a great step forward will have been made. Should other experiments now being considered in natural gas, oil shale, copper, coal, water resources, underground storage, and others, also demonstrate technical or economic advantage, it is conceivable to expect peaceful nuclear explosion to grow from our current rate of one or two experimental shots per year to hundreds of production explosions per year. This growth rate could be severely restricted or reduced to zero if public safety and environmental control cannot be exercised. (author)

Industry potential of large scale uses for peaceful nuclear explosives

International Nuclear Information System (INIS)

Russell, P.L.

1969-01-01

The industrial potential for peaceful uses of nuclear explosions entering a critical stage of development. Should Project Gasbuggy, an experiment to determine to what extent an underground nuclear explosion can stimulate the production of natural gas from low-permeability formations, prove a technical or economic success, a great step forward will have been made. Should other experiments now being considered in natural gas, oil shale, copper, coal, water resources, underground storage, and others, also demonstrate technical or economic advantage, it is conceivable to expect peaceful nuclear explosion to grow from our current rate of one or two experimental shots per year to hundreds of production explosions per year. This growth rate could be severely restricted or reduced to zero if public safety and environmental control cannot be exercised. (author)

Motor systems energy efficiency supply curves: A methodology for assessing the energy efficiency potential of industrial motor systems

International Nuclear Information System (INIS)

McKane, Aimee; Hasanbeigi, Ali

2011-01-01

Motor-driven equipment accounts for approximately 60% of manufacturing final electricity use worldwide. A major barrier to effective policymaking, and to more global acceptance of the energy efficiency potential in industrial motor systems, is the lack of a transparent methodology for quantifying the magnitude and cost-effectiveness of these energy savings. This paper presents the results of groundbreaking analyses conducted for five countries and one region to begin to address this barrier. Using a combination of expert opinion and available data from the United States, Canada, the European Union, Thailand, Vietnam, and Brazil, bottom-up energy efficiency supply curve models were constructed to estimate the cost-effective electricity efficiency potentials and CO 2 emission reduction for three types of motor systems (compressed air, pumping, and fan) in industry for the selected countries/region. Based on these analyses, the share of cost-effective electricity saving potential of these systems as compared to the total motor system energy use in the base year varies between 27% and 49% for pumping, 21% and 47% for compressed air, and 14% and 46% for fan systems. The total technical saving potential varies between 43% and 57% for pumping, 29% and 56% for compressed air, and 27% and 46% for fan systems. - Highlights: → Development of conservation supply curves for the industrial motor systems. → An innovative approach combining available aggregate country-level data with expert opinion. → Results show both cost-effective and technical potential for energy saving and their costs. → Policy implication of the results are briefly discussed.

Gap analysis of industrial energy management systems in Slovenia

International Nuclear Information System (INIS)

Pusnik, Matevz; Al-Mansour, Fouad; Sucic, Boris; Gubina, A.F.

2016-01-01

Industrial energy management systems, which comprise software solutions, upfront services, and ongoing monitoring and management, enable industrial companies to actively manage their energy consumption and energy procurement activities. Energy management systems are usually tailored to the specific industrial needs but may offer limited functionalities, mostly as a result of different identified gaps (process simplifications, improper measurement points, a lack of motivation, etc.). A survey was conducted in order to analyse the gaps and use of energy management systems in Slovenian industry. The results of the survey presented in this paper demonstrate that the use of energy management systems in industry is recognised as a potential competitive advantage by most of the addressed companies. Furthermore, motivation was highlighted as an important prerequisite for process and structural improvements and reported to be thus far insufficiently addressed. Furthermore, the importance of strong cooperation with actors at different levels of industry, namely the executive and shop floor levels, is addressed. In the conclusion, possibilities for new opportunities in the exploitation of energy efficiency through the use of industrial energy management systems are discussed. - Highlights: • Investigating gaps and evaluation of EMS use in Slovenian industry. • Analysis based on the developed self-assessment tool 3EMT. • Existing EMS do not include all the requirements for the industrial operations. • Constructive cooperation between all stakeholders is of crucial importance.

A potential approach to solutions for set games

NARCIS (Netherlands)

Driessen, T.S.H.; Sun, H.

2001-01-01

Concerning the solution theory for set games, the paper introduces a new solution by allocating, to any player, the items (taken from an universe) that are attainable for the player, but can not be blocked (by any coalition not containing the player). The resulting value turns out to be an utmost

Analytical Solution of the Schrödinger Equation with Spatially Varying Effective Mass for Generalised Hylleraas Potential

International Nuclear Information System (INIS)

Debnath, S.; Maji, Smarajit; Meyur, Sanjib

2014-01-01

We have obtained exact solution of the effective mass Schrödinger equation for the generalised Hylleraas potential. The exact bound state energy eigenvalues and corresponding eigenfunctions are presented. The bound state eigenfunctions are obtained in terms of the hypergeometric functions. Results are also given for the special case of potential parameter.

Current knowledge on agarolytic enzymes and the industrial potential of agar-derived sugars.

Science.gov (United States)

Yun, Eun Ju; Yu, Sora; Kim, Kyoung Heon

2017-07-01

Agar is a major cell wall carbohydrate of red macroalgae (Rhodophyta). Sugars derived from agar, such as agarooligosaccharides (AOSs), neoagarooligosaccharides (NAOSs), neoagarobiose (NAB), and 3,6-anhydro-L-galactose (L-AHG), possess various physiological activities. These agar-derived sugars can be produced by hydrolysis using chemicals or agarolytic enzymes. Despite the industrial potential of agar-derived sugars, their application has been hampered mainly due to the absence of efficient processes for the liquefaction and saccharification of agar. In this review, we have focused on strategies for producing high value-added sugars from agarose via chemical or enzymatic liquefaction and enzymatic saccharification. The liquefaction of agarose is a key step for preventing gelling and increasing the solubility of agarose in water by prehydrolyzing agarose into AOSs or NAOSs. For the industrial use of agar-derived sugars, AOS, NAOS, NAB, and L-AHG can be used as functional biomaterials owing to their physiological activities such as antiinflammation, skin whitening, and moisturizing. Recently, it was reported that AHG could be considered as a new anticariogenic sugar to replace xylitol. This review provides a comprehensive overview of processes for the hydrolysis of agar or agarose to produce high value-added sugars and the industrial application of these sugars.

Approximate Solutions to the Dirac Equation with Effective Mass for the Manning-Rosen Potential in N Dimensions

International Nuclear Information System (INIS)

Bahar, M.K.; Yasuk, F.

2012-01-01

The solutions of the effective mass Dirac equation for the Manning-Rosen potential with the centrifugal term are studied approximately in N dimension. The relativistic energy spectrum and two-component spinor eigenfunctions are obtained by the asymptotic iteration method. We have also investigated eigenvalues of the effective mass Dirac-Manning-Rosen problem for α = 0 or α = 1. In this case, the Manning-Rosen potential reduces to the Hulthen potential. (author)

Identifying potential environmental impacts of waste handling strategies in textile industry.

Science.gov (United States)

Yacout, Dalia M M; Hassouna, M S

2016-08-01

Waste management is a successful instrument to minimize generated waste and improve environmental conditions. In spite of the large share of developing countries in the textile industry, limited information is available concerning the waste management strategies implemented for textiles on those countries and their environmental impacts. In the current study, two waste management approaches for hazardous solid waste treatment of acrylic fibers (landfill and incineration) were investigated. The main research questions were: What are the different impacts of each waste management strategy? Which waste management strategy is more ecofriendly? Life cycle assessment was employed in order to model the environmental impacts of each waste streaming approach separately then compare them together. Results revealed that incineration was the more ecofriendly approach. Highest impacts of both approaches were on ecotoxicity and carcinogenic potentials due to release of metals from pigment wastes. Landfill had an impact of 46.8 % on human health as compared to 28 % by incineration. Incineration impact on ecosystem quality was higher than landfill impact (68.4 and 51.3 %, respectively). As for resources category, incineration had a higher impact than landfill (3.5 and 2.0 %, respectively). Those impacts could be mitigated if state-of-the-art landfill or incinerator were used and could be reduced by applying waste to energy approaches for both management systems In conclusion, shifting waste treatment from landfill to incineration would decrease the overall environmental impacts and allow energy recovery. The potential of waste to energy approach by incineration with heat recovery could be considered in further studies. Future research is needed in order to assess the implementation of waste management systems and the preferable waste management strategies in the textile industry on developing countries.

The Potential of RFID Technology in the Textile and Clothing Industry: Opportunities, Requirements and Challenges

Science.gov (United States)

Legnani, Elena; Cavalieri, Sergio; Pinto, Roberto; Dotti, Stefano

In the current competitive environment, companies need to extensively exploit the use of advanced technologies in order to develop a sustainable advantage, enhance their operational efficiency and better serve customers. In this context, RFID technology has emerged as a valid support for the company progress and its value is becoming more and more apparent. In particular, the textile and clothing industry, characterised by short life-cycles , quick response production , fast distribution, erratic customer preferences and impulsive purchasing, is one of the sectors which can extensively benefit from the RFID technology. However, actual applications are still very limited, especially in the upstream side of the supply network. This chapter provides an insight into the main benefits and potentials of this technology and highlights the main issues which are currently inhibiting its large scale development in the textile and clothing industry. The experience of two industry-academia projects and the relative fallouts are reported.

Energy efficiency and CO_2 mitigation potential of the Turkish iron and steel industry using the LEAP (long-range energy alternatives planning) system

International Nuclear Information System (INIS)

Ates, Seyithan A.

2015-01-01

With the assistance of the LEAP (long-range energy alternatives planning) energy modeling tool, this study explores the energy efficiency and CO_2 emission reduction potential of the iron and steel industry in Turkey. With a share of 35%, the steel and iron industry is considered as the most energy-consuming sector in Turkey. The study explores that the energy intensity rate can be lowered by 13%, 38% and 51% in SEI (slow-speed energy efficiency improvement), AEI (accelerating energy efficiency improvement) and CPT (cleaner production and technology scenario) scenarios, respectively. Particularly the projected aggregated energy savings of the scenarios CPT and AES are very promising with saving rates of 33.7% and 23% respectively. Compared to baseline scenarios, energy efficiency improvements correspond to economic potential of 0.1 billion dollars for SEI, 1.25 dollars for AEI and 1.8 billion dollars for CPT scenarios annually. Concerning GHG (greenhouse gas) emissions, in 2030 the iron and steel industry in Turkey is estimated to produce 34.9 MtCO_2 in BAU (business-as-usual scenario), 32.5 MtCO_2 in SEI, 24.6 MtCO_2 in AEI and 14.5 MtCO_2 in CPT a scenario which corresponds to savings of 9%–39%. The study reveals that energy consumption and GHG emissions of the iron and steel industry can be lowered significantly if the necessary measures are implemented. It is expected that this study will fill knowledge gaps pertaining to energy efficiency potential in Turkish energy intensive industries and help stakeholders in energy intensive industries to realize the potential for energy efficiency and GHG mitigation. - Highlights: • This paper explores energy efficiency potential of iron and Steel industry in Turkey. • We applied the LEAP modeling to forecast future developments. • Four different scenarios have been developed for the LEAP modeling. • There is a huge potential for energy efficiency and mitigation of GHG emissions.

Urban BIPV in the new residential construction industry

Energy Technology Data Exchange (ETDEWEB)

Elzinga, D.

2008-03-15

This report for the International Energy Agency (IEA) made by Task 10 of the Photovoltaic Power Systems (PVPS) programme takes a look at urban building-integrated photovoltaics (BIPV) in the new residential construction industry. The mission of the Photovoltaic Power Systems Programme is to enhance the international collaboration efforts which accelerate the development and deployment of photovoltaic solar energy. The aim of Task 10 is stated as being to enhance the opportunities for wide-scale, solution-oriented application of photovoltaics in the urban environment. The report states that different types of building require different approaches to BIPV due to their associated varying dimensions and geometry. Several solutions are proposed to encourage the adoption and diffusion of BIPV by the new home residential building industry. These are divided into PV industry-based approaches and policy-based solutions. The former include end-customer focused policies, the identification of early adopters, the creation of product solutions that meet the needs of the building industry and standards and that the construction industry must be engaged in the design and planning stage of residential developments. Policy questions discussed include the provision of incentives, a planned approach to the demonstration of BIPV and the development of BIPV-specific policy.

Developing E-Learning Solutions in the Automotive Industry

Science.gov (United States)

Bogdan, Razvan; Ancusa, Versavia

2016-01-01

In the rapid developing market of automotive industry, cutting-edge technologies are being introduced. One such example is the AUTOSAR standard. Companies are investing a large amount of finances for the training of their employees into the intricacies of such technologies. In order to face such an increase of the training costs, automotive…

Soil Solution

NARCIS (Netherlands)

Sonneveld, C.; Voogt, W.

2009-01-01

The characteristics of the soil solution in the root environment in the greenhouse industry differ much from those for field grown crops. This is caused firstly by the growing conditions in the greenhouse, which strongly differ from those in the field and secondly the function attributed to the soil

CAUSES OF CRISIS SITUATION IN UKRAINE SUGAR INDUSTRY ENTERPRISES AND THEIR SOLUTIONS

Directory of Open Access Journals (Sweden)

G. Fyliuk

2014-04-01

Full Text Available Current state and major trends of functioning of the sugar industry enterprises in Ukraine are characterized. The industry's place in the structure of social production in Ukraine is highlighted. The dynamics of the number of operating sugar factories and dynamics of production and consumption of sugar in Ukraine during recent years are displayed. The performance of the sugar factories is analyzed. Forecasted assessment of the of PEST- factors on the development of the sugar industry is shown. The basic entry barriers to the industry for new players are indicated. The description of major players in the sugar market is made. Level of concentration of sugar market in Ukraine is calculated and conclusions about its dynamics are made. Factors of crisis state of sugar industry enterprises in Ukraine are determined. Suggestions on implementation of priority measures aimed at improving the efficiency of industry's management in order to drive the enterprises out of the crisis are formulated.

Development of unutilized biomass potentials in forestry and landscape conservation. Logistical challenges and potential uses of innovative telematics technologies and services

Energy Technology Data Exchange (ETDEWEB)

Erhardt, I; Waesche, M [Fraunhofer Institute for Factory Operation and Automation IFF, Magdeburg (Germany)

2006-07-01

Among other things, the heterogeneity of the types, quantities and numbers of potential sources and sinks as well as the means of transportation used continue to make it difficult to describe as a whole logistics processes for developing raw material in forest and field, especially for the wood processing industry, or for recovering renewable energies. Conventional methods of logistics controlling and measurement only capture these processes incompletely and partially. Innovative developments in the field of mobile information technologies are opening tremendous potentials for improving logistics processes. Taking into account the multitude of national and international standards and guidelines in this field, catchphrases such as location based services or LBS and radio frequency identification or RFID already stand for effective and practicable solutions in traditional fields of application for logistics. Building upon RFID and telematic trends and applications in classical fields of logistics, this paper presents current successes and addresses further needs in the forestry and wood processing industries as well as related sectors. The following theses are put forth for discussion: The use of RFID and telematics must guarantee a quantifiable benefit for everyone involved in a process. The development of a broader range of solutions customized for individual cases and preconfigured will help the technology to a breakthrough more than striving for the universal solution will. Standardization is a fundamental prerequisite to user acceptance in general and investment protection, particularly for smaller enterprises. (orig.)

Initial Investigation into the Potential of CSP Industrial Process Heat for the Southwest United States

Energy Technology Data Exchange (ETDEWEB)

Kurup, Parthiv [National Renewable Energy Lab. (NREL), Golden, CO (United States); Turchi, Craig [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2015-11-01

After significant interest in the 1970s, but relatively few deployments, the use of solar technologies for thermal applications, including enhanced oil recovery (EOR), desalination, and industrial process heat (IPH), is again receiving global interest. In particular, the European Union (EU) has been a leader in the use, development, deployment, and tracking of Solar Industrial Process Heat (SIPH) plants. The objective of this study is to ascertain U.S. market potential of IPH for concentrating collector technologies that have been developed and promoted through the U.S. Department of Energy's Concentrating Solar Power (CSP) Program. For this study, the solar-thermal collector technologies of interest are parabolic trough collectors (PTCs) and linear Fresnel (LF) systems.

Evaluation of the potential for agricultural use of the industrial slag from the siderurgica Boyaca

International Nuclear Information System (INIS)

Gonzalez M, Edith; Castro H E

2000-01-01

The main objective of this research was to investigate the fertilizer qualities and possible agricultural use of an industrial slag, originated from the Spoon Furnace during the process of steel production in the Siderurgia de Boyaca company, which generates 10 tons/day of this material as a contaminant factor an experimental design of complete randomized blocks was selected. Eleven treatments were tested including four repetitions and a comparison test or absolute control. The crop indicator was wheat (Triticum vulgare), cultivar ICA Hunza. The treatments were defined in the following way: to absolute control, as an indicator of the natural fertility of the experimental soil to which no fertilizers were applied; T regional test using a common fertilization solution of NPK, treatments T2, T3, T4 and T5 received a doses of 500, 1000, 2000 and 4000 kg/ha of industrial slag respectively. Treatments T6, T7, T8, T9 and T10 are referred to an average doses of 1000 kg/ha of conventional materials as dolomitic lime, Abono Paz del Rio (another local basic slag), North Caroline rock phosphate and phosphacid S-B, respectively. The objective of the research was to compare the effect of equal doses using material of different origin and composition. According with the results, it was concluded that the experimental slag has characteristics as a fertilizer material and could be used in agriculture in soils of low fertility level with properties as those studied. The chemical composition of soluble elements in the industrial slag and the results of yield components obtained by the indicator crop, gives evidence to continue with further researches in order to test at the farming level the validity of the selected doses and their chemical evaluation as liming material containing magnesium, sulfur and trace elements. The results of this research offers new and helpful information for the local steel industrial to evaluate the possibilities to use this residual material in

Spatial Modeling of Industrial Windfall on Soils to Detect Woody Species with Potential for Bioremediation

Science.gov (United States)

S. Salazar; M. Mendoza; A. M. Tejeda

2006-01-01

A spatial model is presented to explain the concentration of heavy metals (Fe, Cu, Zn, Ni, Cr, Co and Pb), in the soils around the industrial complex near the Port of Veracruz, Mexico. Unexpected low concentration sites where then tested to detect woody plant species that may have the capability to hiperacumulate these contaminants, hence having a potential for...

Modern electrochemistry and industry

International Nuclear Information System (INIS)

Kim, Sun Yong

1985-04-01

This book is divided into fifteen chapters on modern electrochemistry and industry. The contents of this book are electrochemistry and industry, electrochemistry for electrolyte like ionic mobility quantity of activity of electrolyte, potential balance system like cell potential, concentration cell and membrane potential, electrochemical kinetics, electrochemistry for surfactant, electrochemistry for electrolysis test such as polarography, chronopotentiometry and Cyclic voltametry, electrolysis reactor NaOH electrolysis industry, H 2 O electrolysis, molten metal electrolysis, copper electrolysis, battery and electro-organic chemistry.

Real-Time Business Intelligence for the Utilities Industry

Directory of Open Access Journals (Sweden)

Janina POPEANGA

2012-12-01

Full Text Available In today’s competitive environment with rapid innovation in smart metering and smart grids, there is an increased need for real-time business intelligence (RTBI in the utilities industry. Giving the fact that this industry is an environment where decisions are time sensitive, RTBI solutions will help utilities improve customer experiences and operational efficiencies. The focus of this paper is on the importance of real-time business intelligence (RTBI in the utilities industry, outlining our vision of real-time business intelligence for this industry. Besides the analysis in this area, the article presents as a case study the Oracle Business Intelligence solution for utilities.

Correctional officers' perceptions of a solution-focused training program: potential implications for working with offenders.

Science.gov (United States)

Pan, Peter Jen Der; Deng, Liang-Yu F; Chang, Shona Shih Hua; Jiang, Karen Jye-Ru

2011-09-01

The purpose of this exploratory study was to explore correctional officers' perceptions and experiences during a solution-focused training program and to initiate development of a modified pattern for correctional officers to use in jails. The study uses grounded theory procedures combined with a follow-up survey. The findings identified six emergent themes: obstacles to doing counseling work in prisons, offenders' amenability to change, correctional officers' self-image, advantages of a solution-focused approach (SFA), potential advantages of applying SFA to offenders, and the need for the consolidation of learning and transformation. Participants perceived the use of solution-focused techniques as appropriate, important, functional, and of only moderate difficulty in interacting with offenders. Finally, a modified pattern was developed for officers to use when working with offenders in jails. Suggestions and recommendations are made for correctional interventions and future studies.

Industrial Photogrammetry - Accepted Metrology Tool or Exotic Niche

Science.gov (United States)

Bösemann, Werner

2016-06-01

New production technologies like 3D printing and other adaptive manufacturing technologies have changed the industrial manufacturing process, often referred to as next industrial revolution or short industry 4.0. Such Cyber Physical Production Systems combine virtual and real world through digitization, model building process simulation and optimization. It is commonly understood that measurement technologies are the key to combine the real and virtual worlds (eg. [Schmitt 2014]). This change from measurement as a quality control tool to a fully integrated step in the production process has also changed the requirements for 3D metrology solutions. Key words like MAA (Measurement Assisted Assembly) illustrate that new position of metrology in the industrial production process. At the same time it is obvious that these processes not only require more measurements but also systems to deliver the required information in high density in a short time. Here optical solutions including photogrammetry for 3D measurements have big advantages over traditional mechanical CMM's. The paper describes the relevance of different photogrammetric solutions including state of the art, industry requirements and application examples.

INDUSTRIAL PHOTOGRAMMETRY - ACCEPTED METROLOGY TOOL OR EXOTIC NICHE

Directory of Open Access Journals (Sweden)

W. Bösemann

2016-06-01

Full Text Available New production technologies like 3D printing and other adaptive manufacturing technologies have changed the industrial manufacturing process, often referred to as next industrial revolution or short industry 4.0. Such Cyber Physical Production Systems combine virtual and real world through digitization, model building process simulation and optimization. It is commonly understood that measurement technologies are the key to combine the real and virtual worlds (eg. [Schmitt 2014]. This change from measurement as a quality control tool to a fully integrated step in the production process has also changed the requirements for 3D metrology solutions. Key words like MAA (Measurement Assisted Assembly illustrate that new position of metrology in the industrial production process. At the same time it is obvious that these processes not only require more measurements but also systems to deliver the required information in high density in a short time. Here optical solutions including photogrammetry for 3D measurements have big advantages over traditional mechanical CMM’s. The paper describes the relevance of different photogrammetric solutions including state of the art, industry requirements and application examples.

pH effect on pit potential and protection potential of stainless steels AISI-304, 310 and 316 in NaCl solution

International Nuclear Information System (INIS)

Cabral, U.Q.; Sathler, L.; Mariano Neto, F.

1973-06-01

For three austenitic stainless steels, AISI 304, 310 and 316, the pH influence on the rupture, protection and corrosion potentials was studied in a 0,5N NACl solution. The pit potentials determined by the chronogalvonometric method, are pH independent within the acid range. They showed a rough linear variation within the basic range having a maximum corresponding to the pH value of 8.8. The electrochemical hysteresis method, employed for determining the protection potential, presented a total pH independence for the AISI 316. The other steels showed a small dependence within the basic range but with a tendency for the protection potential to become slightly more active with increasing pH, within the acid range. It was also noted for the three steels studied that the corrosion potental became more active with increasing pH, within the basic range [pt

Robot vs. tax inspector or how the fourth industrial revolution will change the tax system: a review of problems and solutions

OpenAIRE

Vishnevsky, Valentine P.; Chekina, Viktoriia D.

2018-01-01

The Fourth Industrial Revolution and the accelerated development of cyber-physical technologies lead to essential changes in national tax systems and international taxation. The main areas in which taxation meets cyber-physical technologies are digitalization, robotization, M2M and blockchain technologies. Each of these areas has its own opportunities and problems. Three main approaches towards possible solutions for these new problems are identified. The first is to try to apply taxation to ...

Potential applications of carbon dioxide in chemical industry; Moegliche Nutzungen von Kohlendioxid in der chemischen Industrie

Energy Technology Data Exchange (ETDEWEB)

Behr, Arno; Neuberg, Stefan [Technische Univ. Dortmund (Germany)

2009-10-15

Up to now, the use of carbon dioxide as a renewable C. carbon source plays in the current public debate on CCS technology only a minor role. Though, the chemical utilization of the generally unreactive classified molecule provides same very interesting synthesis routes, which take place without toxic starting materials like phosgene. In this review a number of syntheses using CO{sub 2}, which are currently in development, will be briefly presented. Although most of them have only been investigated on laboratory or miniplant scale and require further development, they demonstrate the high potential of carbon dioxide in industrial syntheses far beyond the traditional applications such as urea or salicylic acid syntheses. Concepts for the synthesis of formic acid and a {delta}-lactone, as well as developments in photosynthesis will be presented. A crucial role in nearly all these conversions plays the catalytic activation of carbon dioxide. (orig.)

Educational aspects of industrial radiography

International Nuclear Information System (INIS)

Krishnamurthy, K.; Wamorkar, R.R.; Singh, G.

1979-01-01

The state of art of training and education in non-destructive testing in India, with special reference to industrial radiography is reviewed. Basic requirement of industry and potential of radioisotopes in industrial inspection are also described. Need for an organised training programme in industrial isotope radiography to exploit potentials for benefit of industry concurrent with the safety is stressed. A comprehensive training programme tailored to meet the needs of Indian industry is outlined. Benefits obtained from the course to the industry since the beginning of the training programme are briefly reviewed. (auth.)

Solution of Effective-Mass Dirac Equation with Scalar-Vector and Pseudoscalar Terms for Generalized Hulthén Potential

Directory of Open Access Journals (Sweden)

Altuğ Arda

2017-01-01

Full Text Available We find the exact bound state solutions and normalization constant for the Dirac equation with scalar-vector-pseudoscalar interaction terms for the generalized Hulthén potential in the case where we have a particular mass function m(x. We also search the solutions for the constant mass where the obtained results correspond to the ones when the Dirac equation has spin and pseudospin symmetry, respectively. After giving the obtained results for the nonrelativistic case, we search then the energy spectra and corresponding upper and lower components of Dirac spinor for the case of PT-symmetric forms of the present potential.

From maturity to value-added innovation: lessons from the pharmaceutical and agro-biotechnology industries.

Science.gov (United States)

Mittra, James; Tait, Joyce; Wield, David

2011-03-01

The pharmaceutical and agro-biotechnology industries have been confronted by dwindling product pipelines and rapid developments in life sciences, thus demanding a strategic rethink of conventional research and development. Despite offering both industries a solution to the pipeline problem, the life sciences have also brought complex regulatory challenges for firms. In this paper, we comment on the response of these industries to the life science trajectory, in the context of maturing conventional small-molecule product pipelines and routes to market. The challenges of managing transition from maturity to new high-value-added innovation models are addressed. Furthermore, we argue that regulation plays a crucial role in shaping the innovation systems of both industries, and as such, we suggest potentially useful changes to the current regulatory system. Copyright © 2010 Elsevier Ltd. All rights reserved.

Energy-economical optimization of industrial sites; Energiewirtschaftliche Optimierung von Industriestandorten

Energy Technology Data Exchange (ETDEWEB)

Berthold, A.; Saliba, S.; Franke, R. [ABB AG, Mannheim (Germany)

2015-07-01

The holistic optimization of an industrial estate networks all electrical components of a location and combines energy trading, energy management and production processes. This allows to minimize the energy consumption from the supply network and to relieve the power grid and to maximize the profitability of the industrial self-generation. By analyzing the potential is detected and the cost of optimization solution is estimated. The generation-side optimization is supported through demand-side optimization (demand response). Through a real-time optimization the of Use of fuels is managed, controlled and optimized. [German] Die ganzheitliche Optimierung einer industriellen Liegenschaft vernetzt alle elektrischen Komponenten eines Standorts und verbindet Energiehandel, Energiemanagement und Produktionsprozesse. Dadurch kann der Energiebezug aus dem Versorgungsnetz minimiert und das Stromnetz entlastet werden, sowie die Profitabilitaet der industriellen Eigenerzeugung maximiert werden. Durch eine Analyse wird das Potential ermittelt und die Kosten der Optimierungsloesung abgeschaetzt. Die erzeugungsseitige Optimierung wird durch die nachfrageseitige Optimierung (Demand Response) gestuetzt. Durch eine Echtzeitoptimierung wird der Einsatz der Energietraeger verwaltet, gesteuert und optimiert.

Solutions for energy recovery of animal waste from leather industry

International Nuclear Information System (INIS)

Lazaroiu, Gheorghe; Pană, Constantin; Mihaescu, Lucian; Cernat, Alexandru; Negurescu, Niculae; Mocanu, Raluca; Negreanu, Gabriel

2017-01-01

Highlights: • Animal fats in blend with diesel fuel for energy valorification through combustion. • Animal waste from tanneries as fuel and for biogas production. • Experimental tests using animal fats as fuel for diesel engines. • Experimental tests modifying the characteristic parameters. - Abstract: Secondary products from food and leather industries are regarded as animal wastes. Conversion of these animal wastes into fuels represents an energy recovery solution not only because of their good combustion properties, but also from the viewpoint of supply stability. A tannery factory usually processes 60–70 t/month of crude leathers, resulting in 12–15 t/month of waste. Fats, which can be used as the input fuel for diesel engines (in crude state or as biodiesel), represent 10% of this animal waste, while the rest are proteins that can be used to generate biogas through anaerobic digestion. Herein, we analyse two approaches to the use of animal waste from tanneries: as fuel for diesel engines and for biogas generation for heat production. Diesel fuelling and fuelling by animal wastes are compared in terms of the engine performance and pollutant emissions. The effects of animal waste usage on the pollutant emissions level, exhaust gas temperature, indicated mean effective pressure, maximum pressure, and engine efficiency are analysed. The energy recovery technologies for animal waste, which are analysed in this work, can be easily implemented and can simultaneously solve the problem posed by animal wastes by using them as an alternative to fossil fuels. Animal fats can be considered an excellent alternative fuel for diesel engines without major constructive modifications.

Finite element solution of nonlinear eddy current problems with periodic excitation and its industrial applications.

Science.gov (United States)

Bíró, Oszkár; Koczka, Gergely; Preis, Kurt

2014-05-01

An efficient finite element method to take account of the nonlinearity of the magnetic materials when analyzing three-dimensional eddy current problems is presented in this paper. The problem is formulated in terms of vector and scalar potentials approximated by edge and node based finite element basis functions. The application of Galerkin techniques leads to a large, nonlinear system of ordinary differential equations in the time domain. The excitations are assumed to be time-periodic and the steady-state periodic solution is of interest only. This is represented either in the frequency domain as a finite Fourier series or in the time domain as a set of discrete time values within one period for each finite element degree of freedom. The former approach is the (continuous) harmonic balance method and, in the latter one, discrete Fourier transformation will be shown to lead to a discrete harmonic balance method. Due to the nonlinearity, all harmonics, both continuous and discrete, are coupled to each other. The harmonics would be decoupled if the problem were linear, therefore, a special nonlinear iteration technique, the fixed-point method is used to linearize the equations by selecting a time-independent permeability distribution, the so-called fixed-point permeability in each nonlinear iteration step. This leads to uncoupled harmonics within these steps. As industrial applications, analyses of large power transformers are presented. The first example is the computation of the electromagnetic field of a single-phase transformer in the time domain with the results compared to those obtained by traditional time-stepping techniques. In the second application, an advanced model of the same transformer is analyzed in the frequency domain by the harmonic balance method with the effect of the presence of higher harmonics on the losses investigated. Finally a third example tackles the case of direct current (DC) bias in the coils of a single-phase transformer.

Bimolecular Master Equations for a Single and Multiple Potential Wells with Analytic Solutions.

Science.gov (United States)

Ghaderi, Nima

2018-04-12

The analytic solutions, that is, populations, are derived for the K-adiabatic and K-active bimolecular master equations, separately, for a single and multiple potential wells and reaction channels, where K is the component of the total angular momentum J along the axis of least moment of inertia of the recombination products at a given energy E. The analytic approach provides the functional dependence of the population of molecules on its K-active or K-adiabatic dissociation, association rate constants and the intermolecular energy transfer, where the approach may complement the usual numerical approaches for reactions of interest. Our previous work, Part I, considered the solutions for a single potential well, whereby an assumption utilized there is presently obviated in the derivation of the exact solutions and farther discussed. At the high-pressure limit, the K-adiabatic and K-active bimolecular master equations may each reduce, respectively, to the K-adiabatic and K-active bimolecular Rice-Ramsperger-Kassel-Marcus theory (high-pressure limit expressions) for bimolecular recombination rate constant, for a single potential well, and augmented by isomerization terms when multiple potential wells are present. In the low-pressure limit, the expression for population above the dissociation limit, associated with a single potential well, becomes equivalent to the usual presumed detailed balance between the association and dissociation rate constants, where the multiple well case is also considered. When the collision frequency of energy transfer, Z LJ , between the chemical intermediate and bath gas is sufficiently less than the dissociation rate constant k d ( E' J' K') for postcollision ( E' J' K), then the solution for population, g( EJK) + , above the critical energy further simplifies such that depending on Z LJ , the dissociation and association rate constant k r ( EJK), as g( EJK) + = k r ( EJK)A·BC/[ Z LJ + k d ( EJK)], where A and BC are the reactants, for

The Development and Full-Scale Experimental Validation of an Optimal Water Treatment Solution in Improving Chiller Performances

Directory of Open Access Journals (Sweden)

Chen-Yu Chiang

2016-06-01

Full Text Available An optimal solution, in combining physical and chemical water treatment methods, has been developed. This method uses a high voltage capacitance based (HVCB electrodes, coupled with biocides to form a sustainable solution in improving chiller plant performances. In this study, the industrial full-scale tests, instead of laboratory tests, have been conducted on chiller plants at the size of 5000 RT to 10,000 RT cooling capacities under commercial operation for more than two years. The experimental results indicated that the condenser approach temperatures can be maintained at below 1 °C for over two years. It has been validated that the coefficient of performance (COP of a chiller can be improved by over 5% by implementing this solution. Every 1 °C reduction in condenser approach temperature can yield approximately 3% increase on chiller COP, which warrants its future application potential in the HVAC industry, where Ta can degrade by 1 °C every three to six months. The solution developed in this study could also reduce chemical dosages and conserve makeup water substantially and is more environment friendly.

Utilization of renewable energy potential in Pakistan - a goal oriented approach through industry-cum-academia linkage

International Nuclear Information System (INIS)

Khalil, M.S.

2011-01-01

Due to the recent power crisis in Pakistan, it is essential to utilize the god gifted renewable energy potentials in the form of hydro-power, solar, wind etc. With recent developments in emerging technologies globally, it is the basic need for indigenous development of renewable energy resources. It can be done through research and development by bridging the gaps between industries and technical institutions. In the world, this approach is being carried out not only for the development but for sustain ability of the R and D in the field of renewable energies. Local industries can play a vital role in using latest computational techniques in the research and development areas with the utilization of technical and engineering institutions. For sustainable development of renewable energy resources in the country, local industry have to come forward and contribute toward the betterment of the country. (author)

Radioactive waste management solutions

International Nuclear Information System (INIS)

Siemann, Michael

2015-01-01

One of the more frequent questions that arise when discussing nuclear energy's potential contribution to mitigating climate change concerns that of how to manage radioactive waste. Radioactive waste is produced through nuclear power generation, but also - although to a significantly lesser extent - in a variety of other sectors including medicine, agriculture, research, industry and education. The amount, type and physical form of radioactive waste varies considerably. Some forms of radioactive waste, for example, need only be stored for a relatively short period while their radioactivity naturally decays to safe levels. Others remain radioactive for hundreds or even hundreds of thousands of years. Public concerns surrounding radioactive waste are largely related to long-lived high-level radioactive waste. Countries around the world with existing nuclear programmes are developing longer-term plans for final disposal of such waste, with an international consensus developing that the geological disposal of high-level waste (HLW) is the most technically feasible and safe solution. This article provides a brief overview of the different forms of radioactive waste, examines storage and disposal solutions, and briefly explores fuel recycling and stakeholder involvement in radioactive waste management decision making

Glycolipid biosurfactants: main properties and potential applications in agriculture and food industry.

Science.gov (United States)

Mnif, Inès; Ghribi, Dhouha

2016-10-01

Glycolipids, consisting of a carbohydrate moiety linked to fatty acids, are microbial surface active compounds produced by various microorganisms. They are characterized by high structural diversity and have the ability to decrease the surface and interfacial tension at the surface and interface, respectively. Rhamnolipids, trehalolipids, mannosylerythritol lipids and cellobiose lipids are among the most popular glycolipids. They have received much practical attention as biopesticides for controlling plant diseases and protecting stored products. As a result of their antifungal activity towards phytopathogenic fungi and larvicidal and mosquitocidal potencies, glycolipid biosurfactants permit the preservation of plants and plant crops from pest invasion. Also, as a result of their emulsifying and antibacterial activities, glycolipids have great potential as food additives and food preservatives. Furthermore, the valorization of food byproducts via the production of glycolipid biosurfactant has received much attention because it permits the bioconversion of byproducts on valuable compounds and decreases the cost of production. Generally, the use of glycolipids in many fields requires their retention from fermentation media. Accordingly, different strategies have been developed to extract and purify glycolipids. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Adaptables in the post-industrial society

DEFF Research Database (Denmark)

Stylsvig Madsen, Ulrik

2006-01-01

How can contemporary industrialized production meet the requirements of a growing complexity and dynamism in a global society? In a society affected by globalization and the never-ending flow of information, the need for artefacts to reinforce the identity of organizations and individuals...... is growing. The mission of architecture is then to form a framework of identity for the particular function or individual, a framework capable of distinguishing the function / the individual from one another and from the surrounding society. Industrial production within the construction business is therefore...... met with increasing demands for individual solutions. The question then is how this challenge is met in the best way by industrialized production, technologically (products/solutions) as well as theoretically (conceptual approach)...

The Importance of Informatics for Health Care Industry

Directory of Open Access Journals (Sweden)

Abdullah Talha Kabakuş

2016-09-01

Full Text Available There is no industry that does not benefit from the advantages of information technology (IT. Health care industry is no different from them. IT solutions are used to minimize the human resource required for labor-intensive or time consuming tasks by automating them, benefit from the intelligent software solutions that not just store the data in electronic format but also ease the decision making process, accelerate the business processes by providing services simultaneously, and provide maintainable and consistent services. Despite all of these advantages, health care industry spends only 2% of its revenues on technology, which is very limited when it is compared to other industries that spend around 10%.

Salpeter equation in position space: Numerical solution for arbitrary confining potentials

International Nuclear Information System (INIS)

Nickisch, L.J.; Durand, L.; Durand, B.

1984-01-01

We present and test two new methods for the numerical solution of the relativistic wave equation [(-del 2 +m 1 2 )/sup 1/2/+(-del 2 +m 2 2 )/sup 1/2/+V(r)-M]psi( r ) = 0, which appears in the theory of relativistic quark-antiquark bound states. Our methods work directly in position space, and hence have the desirable features that we can vary the potential V(r) locally in fitting the qq-bar mass spectrum, and can easily build in the expected behavior of V for r→0,infinity. Our first method converts the nonlocal square-root operators to mildly singular integral operators involving hyperbolic Bessel functions. The resulting integral equation can be solved numerically by matrix techniques. Our second method approximates the square-root operators directly by finite matrices. Both methods converge rapidly with increasing matrix size (the square-root matrix method more rapidly) and can be used in fast-fitting routines. We present some tests for oscillator and Coulomb interactions, and for the realistic Coulomb-plus-linear potential used in qq-bar phenomenology

Removal of Hexavalent Chromium from Aqueous Solutions using ...

African Journals Online (AJOL)

The hexavalent chromium exists in aquatic media as water soluble complex anions and persist. These are concentrated in industrial waste water especially from the tannery industries and release of effluents from industries adversely affects the environment. The removal of heavy metals from aqueous solutions is carried ...

Potential of carbon dioxide storage from petroleum industries in the Gulf of Thailand for green production

Science.gov (United States)

Rawangphai, M.; Maneeintr, K.

2018-04-01

Recently, climate change and global warming are the global concern because of an increase in the huge amount of carbon dioxide (CO2) in the atmosphere. This gas comes from energy activities and industries like petroleum industries. Carbon capture and storage (CCS) is the practical technology to reduce and storage CO2. In Thailand, one of the main potential sites for storage is the Gulf of Thailand. However, the research on this issue is very rare in Thailand. Consequently, this work is aiming on the potential study of CO2 geological storage in formations in the Gulf of Thailand by using simulation. The CO2 storage capacity, pressure buildup and plume migration have been estimated. Also, this study has been simulated with various conditions. CO2 injection is used from 1,000-4,000 tons per day with the depth from 2,200-2,330 meters and the results are studied for 50 years as a monitoring period. The results present that with the formation characteristics, CO2 storage in this area has potential. Moreover, pressure buildup and plume migration are illustrated for the period of 50 years. As a fundamental knowledge, this study can contribute to CO2 storage in an offshore area in Thailand.

The Mexican electricity industry - cogeneration potential

International Nuclear Information System (INIS)

Monroy, I.L.

2000-01-01

A brief history of Mexico's electric power industry is given. Diagrams show (i) the increase in primary energy production from 1990-1998; (ii) energy consumption by sector and (iii) the change in capacity between 1990 and 1998. The projected energy development for 1998-2007 is discussed. The Mexican government has chosen cogeneration to be an important contributor to future energy-efficient power production. Data on installed cogeneration capacity for years 2000 and 2001 are given according to sector

Potential of an asymmetrical agitation in industrial mixing

Directory of Open Access Journals (Sweden)

Kazuhiko Nishi

2013-10-01

article: Nishi, K., Enya, N., Sonoda, K., Misumi, R., Kaminoyama, M.  (2013. Potential of an asymmetrical agitation in industrial mixing. International Journal of Science and Engineering, 5(2,73-80. Doi: 10.12777/ijse.5.2.73-80

Exact solutions of the Dirac equation with a Coulomb plus scalar potential in 2 + 1 dimensions

International Nuclear Information System (INIS)

Dong, Shihai; Gu, Xiaoyan; Ma, Zhongqi; Dong, Shishan

2002-01-01

The exact solutions of the (2+1)-dimensional Dirac equation with a Coulomb potential and a scalar one are analytically presented by studying the second-order differential equations obtained from a pair of coupled first-order ones. The eigenvalues are studied in some detail. (author)

Forward and pressure retarded osmosis: potential solutions for global challenges in energy and water supply.

Science.gov (United States)

Klaysom, Chalida; Cath, Tazhi Y; Depuydt, Tom; Vankelecom, Ivo F J

2013-08-21

Osmotically driven membrane processes (ODMP) have gained renewed interest in recent years and they might become a potential solution for the world's most challenging problems of water and energy scarcity. Though the concept of utilizing osmotic pressure difference between high and low salinity streams across semipermeable membranes has been explored for several decades, lack of optimal membranes and draw solutions hindered competition between forward osmosis (FO) and pressure retarded osmosis (PRO) with existing water purification and power generation technologies, respectively. Driven by growing global water scarcity and by energy cost and negative environmental impacts, novel membranes and draw solutions are being developed for ODMPs, mass and heat transfer in osmotic process are becoming better understood, and new applications of ODMPs are emerging. Therefore, OMDPs might become promising green technologies to provide clean water and clean energy from abundantly available renewable resources. This review focuses primarily on new insights into osmotic membrane transport mechanisms and on novel membranes and draw solutions that are currently being developed. Furthermore, the effects of operating conditions on the overall performance of osmotic membranes will be highlighted and future perspectives will be presented.

Protection of Renewable-dominated Microgrids: Challenges and Potential Solutions

Energy Technology Data Exchange (ETDEWEB)

Elkhatib, Mohamed [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Ellis, Abraham [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Biswal, Milan [New Mexico State Univ., Las Cruces, NM (United States); Brahma, Sukumar [New Mexico State Univ., Las Cruces, NM (United States); Ranade, Satish [New Mexico State Univ., Las Cruces, NM (United States)

2016-11-01

In this report we address the challenge of designing efficient protection system for inverter- dominated microgrids. These microgrids are characterised with limited fault current capacity as a result of current-limiting protection functions of inverters. Typically, inverters limit their fault contribution in sub-cycle time frame to as low as 1.1 per unit. As a result, overcurrent protection could fail completely to detect faults in inverter-dominated microgrids. As part of this project a detailed literature survey of existing and proposed microgrid protection schemes were conducted. The survey concluded that there is a gap in the available microgrid protection methods. The only credible protection solution available in literature for low- fault inverter-dominated microgrids is the differential protection scheme which represents a robust transmission-grade protection solution but at a very high cost. Two non-overcurrent protection schemes were investigated as part of this project; impedance-based protection and transient-based protection. Impedance-based protection depends on monitoring impedance trajectories at feeder relays to detect faults. Two communication-based impedance-based protection schemes were developed. the first scheme utilizes directional elements and pilot signals to locate the fault. The second scheme depends on a Central Protection Unit that communicates with all feeder relays to locate the fault based on directional flags received from feeder relays. The later approach could potentially be adapted to protect networked microgrids and dynamic topology microgrids. Transient-based protection relies on analyzing high frequency transients to detect and locate faults. This approach is very promising but its implementation in the filed faces several challenges. For example, high frequency transients due to faults can be confused with transients due to other events such as capacitor switching. Additionally, while detecting faults by analyzing transients

Nature-based solutions for urban landscapes under post-industrialization and globalization: Barcelona versus Shanghai.

Science.gov (United States)

Fan, Peilei; Ouyang, Zutao; Basnou, Corina; Pino, Joan; Park, Hogeun; Chen, Jiquan

2017-07-01

Using Barcelona and Shanghai as case studies, we examined the nature-based solutions (NBS) in urban settings-specifically within cities experiencing post-industrialization and globalization. Our specific research questions are: (1) What are the spatiotemporal changes in urban built-up land and green space in Barcelona and Shanghai? (2) What are the relationships between economic development, exemplified by post-industrialization, globalization, and urban green space? Urban land use and green space change were evaluated using data derived from a variety of sources, including satellite images, landscape matrix indicators, and a land conversion matrix. The relationships between economic development, globalization, and environmental quality were analyzed through partial least squares structural equation modeling based on secondary statistical data. Both Barcelona and Shanghai have undergone rapid urbanization, with urban expansion in Barcelona beginning in the 1960s-1970s and in Shanghai in the last decade. While Barcelona's urban green space and green space per capita began declining between the 1950s and 1990s, they increased slightly over the past two decades. Shanghai, however, has consistently and significantly improved urban green space and green space per capita over the past six decades, especially since the economic reform in 1978. Economic development has a direct and significant influence on urban green space for both cities and post-industrialization had served as the main driving force for urban landscape change in Barcelona and Shanghai. Based on secondary statistical and qualitative data from on-site observations and interviews with local experts, we highlighted the institution's role in NBS planning. Furthermore, aspiration to become a global or globalizing city motivated both cities to use NBS planning as a place-making tool to attract global investment, which is reflected in various governing policies and regulations. The cities' effort to achieve a

Basic project on the cooperation in enhancement of the international energy consumption efficiency. Survey of energy conservation potential by industry; 2000 nendo kokusai energy shohi koritsuka chosa nado kyoryoku kiso jigyo hokokusho. Gyoshubetsu sho energy potential chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of looking for measures to promote the effective energy conservation in China, the potential energy conservation amount in general plants was surveyed and analyzed by industry. Activities were made in the following fields: 1) survey of the actual state of energy in main industries; 2) energy conservation potential in the cement industry in China; 3) energy conservation potential in thermal power plants in China. In 1), survey was made on 8 industries including the iron/steel industry and oil refining industry. In 2), survey was made of the actual state of the Liulihe cement plant and Shitou cement plant. The subjects extracted were the arrangement of instrumentation equipment such as the exhaust gas analyzer needed for combustion management, improvement of the air/fuel ratio of kiln, enhancement of cooling efficiency of clinker cooler, etc. In 3), the actual state of the Qinling power plant was surveyed, and it was made clear that high efficiency of 38% or more can be maintained if the appropriate use/maintenance management is made (coal unit consumption: 383g/kWh in Qinling and 309g/kWh). (NEDO)

Use of e-Commerce in Carpet Industry

OpenAIRE

M. Rashid Malik; Rekha Prasad

2014-01-01

This research study is motivated by the growing use of e-commerce in Indian Industries. ECommerce encompasses all business conducted by the use of Information and communication technology. Many business houses have started implementing the use of e-commerce solutions to conduct their businesses. But carpet industry is lagging behind in the use of this very critical tool as we found in our study only 18% carpet exporters are using e-commerce solutions to sell their products across the borders....

Seasonal AVS-SEM relationship in sediments and potential bioavailability of metals in industrialized estuary, southeastern Brazil.

Science.gov (United States)

Nizoli, Erico Casare; Luiz-Silva, Wanilson

2012-04-01

In anoxic sediments, as those found in estuaries, the mobility of metals can be controlled by the formation of stable sulfide complexes. The potential bioavailability of a metal can then be predicted on the basis of the acid volatile sulfide (AVS) and simultaneously extracted metals (SEM) criterion. Distributions of AVS and SEM (Hg, Cu, Pb, Cd, Zn, and Ni) along the sediment profiles were determined seasonally for three rivers that constitute the Santos-Cubatão estuarine system (SE Brazil), which is located in one of the most industrialized areas of Latin America. AVS and SEM concentrations varied significantly, from 0.04 to 31.9 μmol g(-1) and 0.086-6.659 μmol g(-1), respectively. The highest AVS levels in sediments were detected in the winter, whereas high SEM values predominated in the summer. Considering SEM-AVS molar differences as a parameter to evaluate potential bioavailability, sediments nearest to the industrial area represent higher risk to biota, especially during the summer. It is due to relatively low AVS values and not necessarily high concentrations of metals.

Strengthening Industrial Ecology’s Links with Business Studies: Insights and Potential Contributions from the Innovation and Business Models Literature

Directory of Open Access Journals (Sweden)

Samantha Sharpe

2014-03-01

Full Text Available The declining availability of natural resources and the environmental impacts of continued extraction of primary resources for production activities have forced greater focus on waste streams and recycling activities. Industrial ecology as a field of practice and theory has been closely related to sustainability issues, yet despite the development of much theory and specific tools and methodologies, the link between natural, industrial and economic systems is not convincing. Not only that, the need for delivering sustainable production and consumption practices is increasing, which is demanding new solutions to existing problems, particularly around the degree of novelty. The interaction of industrial ecology with business studies and industrial investment decision-making remains under-developed, and this is likely impacting on the adoption of more sustainable and resource-efficient practices. As such, this paper uses a constructive approach and explores how two areas of the literature can support the development of the industrial ecology field into strategic business practice: firstly, the innovation literature, particularly the emerging work on open innovation and sustainable innovation as a model to understand radical innovation processes and the creation and maintenance of networked systems of firms; secondly, the closely related area of business model (BM innovation, specifically the emerging typologies of sustainable BMs and how these typologies can be developed and used as a route to positioning recycling activities at the strategic management level of the firm.

Energy audit: potential of energy - conservation in Jordanian ceramic industry

International Nuclear Information System (INIS)

Adas, H.; Taher, A.

2005-01-01

This paper represents the findings of the preliminary energy-audits performed by the Rational Use of Energy Division at the National Energy Research Center (NERC), as well as the findings of a detailed energy-audit carried out in the largest Ceramic plant in Jordan (Jordan Ceramic industries).These studies were preceded by a survey of the ceramic factories in Jordan. The survey was carried out in 1997. The performed preliminary energy-audits showed that an average saving-potential in most of theses plants is about 25 % of the total energy-bills in these plants, which constitutes a considerable portion of the total production-cost. This fact was verified through the detailed energy-audit performed by NERC team for the largest Ceramic Plant in Jordan in June 2003, which showed an energy-saving potential of about 30 %. This saving can be achieved by some no-cost or low-cost measures, in addition to some measures that need reasonable investments with an average pay-back period of about two years. This detailed energy-audit covered electrical systems, refrigeration systems, compressed-air systems, and kilns. The results of the detailed energy-audit can be disseminated to other Ceramic plant, because of the similarity in the production process between these plants and the plant where the detailed energy-audit was carried out. (author)

Are automatic systems the future of motorcycle safety? A novel methodology to prioritize potential safety solutions based on their projected effectiveness.

Science.gov (United States)

Gil, Gustavo; Savino, Giovanni; Piantini, Simone; Baldanzini, Niccolò; Happee, Riender; Pierini, Marco

2017-11-17

Motorcycle riders are involved in significantly more crashes per kilometer driven than passenger car drivers. Nonetheless, the development and implementation of motorcycle safety systems lags far behind that of passenger cars. This research addresses the identification of the most effective motorcycle safety solutions in the context of different countries. A knowledge-based system of motorcycle safety (KBMS) was developed to assess the potential for various safety solutions to mitigate or avoid motorcycle crashes. First, a set of 26 common crash scenarios was identified from the analysis of multiple crash databases. Second, the relative effectiveness of 10 safety solutions was assessed for the 26 crash scenarios by a panel of experts. Third, relevant information about crashes was used to weigh the importance of each crash scenario in the region studied. The KBMS method was applied with an Italian database, with a total of more than 1 million motorcycle crashes in the period 2000-2012. When applied to the Italian context, the KBMS suggested that automatic systems designed to compensate for riders' or drivers' errors of commission or omission are the potentially most effective safety solution. The KBMS method showed an effective way to compare the potential of various safety solutions, through a scored list with the expected effectiveness of each safety solution for the region to which the crash data belong. A comparison of our results with a previous study that attempted a systematic prioritization of safety systems for motorcycles (PISa project) showed an encouraging agreement. Current results revealed that automatic systems have the greatest potential to improve motorcycle safety. Accumulating and encoding expertise in crash analysis from a range of disciplines into a scalable and reusable analytical tool, as proposed with the use of KBMS, has the potential to guide research and development of effective safety systems. As the expert assessment of the crash

In search of loyalty: private label packaging solutions for the retail grocery industry

OpenAIRE

Bullen, Christine Angela Holly

2006-01-01

The U.S. corrugated packaging industry is highly concentrated, competitive and mature, facing only modest growth in the United States. The objective of this paper is to understand the opportunity that private label grocery products present to the corrugated packaging industry and how Weyerhaeuser Company might increase demand of corrugated boxes. Industry analyses of both the U.S. retail and corrugated packaging industry are provided in conjunction with summaries of major firms in the respect...

PROBLEMS OF UKRAINIAN ENERGY AND THEIR SOLUTIONS

Directory of Open Access Journals (Sweden)

G. Fyliuk

2016-04-01

Full Text Available The paper studies current situation at the Ukrainian electric power industry. The problems which prevent development of the industry under current conditions are analyzed. The problems of the cross-subsidization are exposed. The ways of the problems solutions are offered.

Carbon dioxide recycling: emerging large-scale technologies with industrial potential.

Science.gov (United States)

Quadrelli, Elsje Alessandra; Centi, Gabriele; Duplan, Jean-Luc; Perathoner, Siglinda

2011-09-19

This Review introduces this special issue of ChemSusChem dedicated to CO(2) recycling. Its aim is to offer an up-to-date overview of CO(2) chemical utilization (inorganic mineralization, organic carboxylation, reduction reactions, and biochemical conversion), as a continuation and extension of earlier books and reviews on this topic, but with a specific focus on large-volume routes and projects/pilot plants that are currently emerging at (pre-)industrial level. The Review also highlights how some of these routes will offer a valuable opportunity to introduce renewable energy into the existing energy and chemical infrastructure (i.e., "drop-in" renewable energy) by synthesis of chemicals from CO(2) that are easy to transport and store. CO(2) conversion therefore has the potential to become a key pillar of the sustainable and resource-efficient production of chemicals and energy from renewables. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The future for fuel cells in the automotive industry

International Nuclear Information System (INIS)

Wells, P.E.

2004-01-01

'Full text:' This paper presents the view that the automotive industry, seen as a vital potential market for hydrogen fuel cell applications, is one that will be characterised in the future by an unprecedented combination of technological and economic diversity. This highly volatile and uncertain future has profound implications for those involved in government policy related to energy use and transportation, as well as those involved in the fuel cell industry. Most significantly, it is argued that the industry that applies hydrogen fuel cells twenty to thirty years from now will have a quite different structure and economic logic to that which currently prevails. Suppliers of hydrogen fuel cell solutions and systems need to have considerable flexibility in their business models. The themes of diversity and co-existence are developed from extensive research into the contemporary automotive industry, as well as an active involvement in the government policy arena at national, EU and international levels. The continued search for sustainability will not just entail the insertion of technology into otherwise familiar products by otherwise familiar manufacturing processes. It will enable and require the transformation of industry. This paper seeks to outline some of the ways in which the changes could unfold. (author)

SFG study on potential-dependent structure of water at Pt electrode/electrolyte solution interface

Energy Technology Data Exchange (ETDEWEB)

Noguchi, Hidenori; Okada, Tsubasa; Uosaki, Kohei [Physical Chemistry Laboratory, Division of Chemistry, Graduate School of Science, Hokkaido University, Sapporo 060-0810 (Japan)

2008-10-01

Structure of water at Pt/electrolyte solution interface was investigated by sum frequency generation (SFG) spectroscopy. Two broad peaks were observed in OH stretching region at ca. 3200 cm{sup -1} and ca. 3400 cm{sup -1}, which are known to be due to the symmetric OH stretching (U{sub 1}) of tetrahedrally coordinated, i.e., strongly hydrogen bonded 'ice-like' water, and the asymmetric OH stretching (U{sub 3}) of water molecules in a more random arrangement, i.e., weakly hydrogen bonded 'liquid-like' water, respectively. The SFG intensity strongly depended on electrode potential. Several possibilities are suggested for the potential dependence of the SFG intensity. (author)

Comparison of methods of zeta potential and residual turbidity of pectin solutions using calcium sulphate/aluminium sulphate as a precipitant

Directory of Open Access Journals (Sweden)

Kuljanin Tatjana A.

2017-01-01

Full Text Available The affinity of calcium ion binding from CaO used in the most common process of purification of sugar beet juice is relatively low. Therefore, large amounts of this compound are required. This paper presents the theoretical basis of a novel sugar beet juice purification method based on the application of the binary system CaSO4/Al2(SO4 . In order to monitor the process of coagulation and precipitation of pectin in the presence of CaSO4/Al2(SO43, two methods were compared: measurement of the zeta potential and of residual solution turbidity. The zeta potential of pectin solution was determined by electrophoretic method, while the residual turbidity was determined by spectrophotometry. Two model solutions of pectin (0.1 % w/w were investigated. Studies were performed with 10 different concentrations of the binary solution CaSO4/Al2(SO43 (50 - 500 g dm-3. The amount of the precipitant CaSO4/Al2(SO43 (1:1 w/w needed to achieve the minimum solution turbidity and charge neutralization of pectin particles (zero zeta potential were measured and compared. Colloidal destabilization occurred before a complete neutralization of the surface charge of pectin particles (zeta potential ~ 0 mV. Optimal quantities (490 - 705 mg g-1 pectin of the applied binary mixture, were obtained using both methods. This is much lower than the amount of CaO that is commonly used in the conventional process of sugar beet juice purification (about 9 g• g-1 pectin. The use of these precipitants could be important from both economic and environmental point of view. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. TR 31055

Voltage quality: solutions of desensitization; Qualite de la tension: les solutions de desensibilisation

Energy Technology Data Exchange (ETDEWEB)

Anon.

1999-10-01

The occurrence of voltage drops and cuts can lead to major malfunctions in electrical installations with sometimes important economical impacts. Thus, the use of solutions of desensitization are needed to avoid such disturbances. This technical paper gives a summary of the basic solutions elaborated by Electricite de France (EdF) with the participation of electrical engineering associations in order to solve the problems encountered in existing installations and to provide specifications for the newly designed installations: the desensitization process (origin of voltage drops, solutions, costs), the diagnosis of industrial installations (identification, quantitative analysis and recording of disturbances, complementary informations, causes, economical impact, solutions, costs, remedial action), the general and specific solutions of desensitization (instrumentation and control systems, switches, relays, motors, speed regulators and variators), specific solutions for computerized and electronic systems, and the role of batteries. (J.S.)