WorldWideScience

Sample records for positive expulsion bellows

  1. Development of a Hemispherical Metal Diaphragm for Single-Cycle Liquid-Metal Positive Expulsion Systems

    National Research Council Canada - National Science Library

    Gorland, Sol

    1965-01-01

    This report presents experimental results pertaining to the design and development of a metallic expulsion diaphragm for single-cycle positive expulsion of high-temperature liquid in an agravity condition...

  2. A superconducting linear motor drive for a positive displacement bellows pump for use in the g-2 cryogenics system

    International Nuclear Information System (INIS)

    Green, M.A.

    1994-10-01

    Forced two-phase cooling of indirectly cooled magnets requires circulation of liquid helium through the magnet cooling channel. A bellows helium pump is one possible way of providing helium flow to a magnet cooling system. Since the bellows type of helium pump is immersed in liquid helium, a superconducting linear motor drive appears to be an attractive option. This report describes a linear motor drive that employs oriented permanent magnet materials such as samarium-cobalt as the stator magnet system and a superconducting loud speaker voice coil type of drive as the armature of the linear motor. This report examines drive motor requirements for a helium pump

  3. Flexible metal bellows

    CERN Multimedia

    CERN PhotoLab

    1975-01-01

    A set of flexible metal bellows being fatigue-tested by repeated offset motion. Such bellows assemblies were used in the SPS vacuum system at places where , for instance, beam stoppers and collimators had to be moved frequently in and out of the beam path.

  4. PFR experience of bellows operating in sodium systems

    International Nuclear Information System (INIS)

    Hodgson, D.

    1980-01-01

    Although there was little operating experience with bellows in sodium systems available during the design phase of the UK 250 MWe prototype fast reactor, bellows were extensively utilised to seal valves and to overcome the problems of differential thermal movements in several important applications. However, because of this lack of operational experience in sodium and the non-availability of design codes it was considered prudent not to install bellows in situations where failure could possibly initiate events of unpredictable proportions, or in positions where replacement following failure would be extremely difficult i.e. involving complete shutdown of the reactor over an extended period (in excess of six months) and/or necessitate removal of large quantities of primary sodium from the reactor vessel. This paper describes some of the bellows units installed in the PFR and the performance achieved during six years of reactor operation

  5. Secession and Expulsion

    DEFF Research Database (Denmark)

    Sweeney, Richard J.

    2003-01-01

    If secession or expulsion ends in a `velvet divorce,' as with Czechoslovakia, costs areminimal and the split is relatively unimportant. High costs arise if a federation splits into mutuallyhostile, comparably sized regions. Perhaps the majority of splits lead to dangerous hostility. Awell-designe...

  6. Elastic stresses in u-shaped bellows

    International Nuclear Information System (INIS)

    Janzen, P.

    1980-05-01

    This report presents relations describing the meridional and circumferential elastic stress levels at the root and crown due to external pressure and axial deflection of U-shaped bellows. The derivation is based on a statistical analysis of theoretical data obtained from a finite element analysis of selected bellows configurations. The mathematical formulations and various graphical representations are proposed as aids to bellows design and analysis. (auth)

  7. Structural analysis of TFTR vacuum vessel bellows and bellows cover sections

    International Nuclear Information System (INIS)

    Driesen, G.

    1975-10-01

    A structural evaluation of the bellows and bellows cover sections was undertaken in order to confirm the structural integrity of these TFTR vacuum vessel components in the prescribed operating environment. The evaluations investigate component stability, stress, and deflection behavior. The products of this investigation appearing in this report include; (1) Structural verification of the vacuum bellows as currently defined in an operating environment of one atmosphere external pressure and 93 0 C (200 0 F) uniform temperature. (2) The establishment of a structurally adequate design configuration for the bellows cover section. (3) The presentation of a parametric study which indicates the effects of varying some bellows cover section parameters in order to obtain acceptable variations of this design configuration. (4) A verification of bellows and bellows cover section integrity to preclude a fatigue type failure for reactor startup and shutdown cyclic life in the design environment

  8. Development of bellows for IHX in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Funada, T; Tomioka, Y; Norimatsu, S; Ohta, T; Takahashi, T

    1980-02-01

    A bellows is installed at the outer side of the secondary sodium entrance nozzle of MONJU IHX as the absorber for the difference of thermal expansion between the pressure equipment and the piping. A research and development program on IHX bellows was performed in the field of experiment and analysis for establishing the feasibility of IHX bellows under high temperature conditions. This report consists of three sections, namely design profile, experimental tests and analysis of IHX bellows. In the design profile a calculation of temperature distribution of bellows and stress analysis using a half convolution model are included. Basic tests such as non-destructive tests on the raw metal sheet and selection tests of welding conditions were performed. Some results of these basic tests, fatigue tests and sodium exposure tests are described in the research and development section of this report. Furthermore, analytical calculations led the correlations on a maximum stress between axial and some other loads. (author)

  9. Development of FBR piping bellows joint

    International Nuclear Information System (INIS)

    Tsukimori, Kazuyuki; Iwata, Koji

    1991-01-01

    Reduction of construction cost is one of the most important problems to realize a FBR (Fast Breeder Reactor) Plant. Significant reduction of the construction cost of a reactor building, related equipments and facilities can be expected by shortening the length of its long cooling pipes. Since the bellows has a great capacity for absorbing thermal expansion displacement, application of bellows expansion joints is considered as the most influential measure for reduction of the piping length. To confirm technological possibilities of application and practical use of bellows joints in the main piping systems, extensive R and D's, development of various methods for evaluating the strength of bellows, establishment of inspection and maintenance techniques, studies on safety logic, etc., were carried out by PNC from 1983 to 1988. Through these studies, technological possibilities of bellows joints were confirmed and the results were summarized in the 'Structural Design Guide for Class 1 Piping Bellows Expansion Joints of Fast Breeder Reactor for Elevated Temperature Service' and the 'Inspection and Maintenance Standards of Piping bellows expansion Joints'. (author)

  10. Containment bellows testing under extreme loads

    International Nuclear Information System (INIS)

    Splezter, B.L.; Lambert, L.D.; Parks, M.B.

    1993-01-01

    Sandia National Laboratories (SNL) is conducting several research programs to help develop validated methods for the prediction of the ultimate pressure capacity, at elevated temperatures, of light water reactor (LWR) containment structures. To help understand the ultimate pressure of the entire containment pressure boundary, each component must be evaluated. The containment pressure boundary consists of the containment shell and many access, piping, and electrical penetrations. The focus of the current research program is to study the ultimate behavior of flexible metal bellows that are used at piping penetrations. Bellows are commonly used at piping penetrations in steel containments; however, they have very few applications in concrete (reinforced or prestressed) containments. The purpose of piping bellows is to provide a soft connection between the containment shell and the pipe are attached while maintaining the containment pressure boundary. In this way, piping loads caused by differential movement between the piping and the containment shell are minimized. SNL is conducting a test program to determine the leaktight capacity of containment bellows when subjected to postulated severe accident conditions. If the test results indicate that containment bellows could be a possible failure mode of the containment pressure boundary, then methods will be developed to predict the deformation, pressure, and temperature conditions that would likely cause a bellows failure. Results from the test program would be used to validate the prediction methods. This paper provides a description of the use and design of bellows in containment piping penetrations, the types of possible bellows loadings during a severe accident, and an overview of the test program, including available test results at the time of writing

  11. Testing of the rectangular pivot-point bellows for the PPPL tokamak fusion test reactor

    International Nuclear Information System (INIS)

    Haughian, J.; Lou, K.; Greer, J.; Fong, M.; Scalise, D.T.

    1983-12-01

    The Neutral Beam Pivot Point Bellows (PPB) is installed in the duct which connects the Neutral Beam Enclosure to the Torus. This bellows, located at the pivot point, must fit the severely limited space available at the pivot-point location. Consequently, it has to be made rectangular in cross section with a large inside area for beam access. This leads to small convolutions with high stress concentrations. The function of the bellows is to permit change in the angular positioning of the neutral beam line with respect to the Tokamak, to isolate the Neutral Beam Line from the deflection of the Torus during bake out, and to allow for all misalignments. Internally the bellows will have a vacuum along with such gases such as hydrogen or deuterium. Tests parameters are described

  12. Microstructural evolution of hydroformed Inconel 625 bellows

    Energy Technology Data Exchange (ETDEWEB)

    Pavithra, E., E-mail: epavithrasenthil@gmail.com; Senthil Kumar, V.S., E-mail: vsskumar@annauniv.edu

    2016-06-05

    Fatigue cycle tests of Inconel 625 superalloy bellows expansion joints were conducted using a Fatigue testing machine at both room and elevated (650 °C) temperatures. Optical Microscope, Scanning Electron Microscope (SEM) and Energy Dispersive X-ray Spectroscopy (EDS) were employed to investigate the microstructure evolution of grains and its boundaries. The intermetallic phases like γ″ were found and carbide precipitates were observed on the grain boundaries at elevated temperature. The recrystallization of the grains and its growth at the elevated temperature is characterized. - Highlights: • The fatigue test is conducted for Inconel 625 bellows in both room and elevated (650 °C) temperatures. • The investigation on the microstructural study of Fatigue behaviour of Inconel 625 Bellows Expansion joints. • The characterisation studies were done by Optical microscope and SEM/EDAS.

  13. Microstructural evolution of hydroformed Inconel 625 bellows

    International Nuclear Information System (INIS)

    Pavithra, E.; Senthil Kumar, V.S.

    2016-01-01

    Fatigue cycle tests of Inconel 625 superalloy bellows expansion joints were conducted using a Fatigue testing machine at both room and elevated (650 °C) temperatures. Optical Microscope, Scanning Electron Microscope (SEM) and Energy Dispersive X-ray Spectroscopy (EDS) were employed to investigate the microstructure evolution of grains and its boundaries. The intermetallic phases like γ″ were found and carbide precipitates were observed on the grain boundaries at elevated temperature. The recrystallization of the grains and its growth at the elevated temperature is characterized. - Highlights: • The fatigue test is conducted for Inconel 625 bellows in both room and elevated (650 °C) temperatures. • The investigation on the microstructural study of Fatigue behaviour of Inconel 625 Bellows Expansion joints. • The characterisation studies were done by Optical microscope and SEM/EDAS.

  14. Welding and manufacture technology of three-layer bellows

    International Nuclear Information System (INIS)

    Dou Zhengping; Jiang Yunbo; Xie Zhiqiang; Pei Qiusheng; Wang Jindong; Zhang Zhiqiang

    2005-01-01

    Using argon tungsten arc welding the technology research and manufacture was carried out for three-layer bellows with the diameter of 350 mm or 230 mm. The theory rigidity and fatigue intensity of welded bellows were experimentally confirmed, the reasonable welding parameters was selected, and three-layer welded bellows with the diameter of 350 mm or 230 mm were manufactured. Quality of welded bellows accords with techniques standard. (authors)

  15. Use of extinction and reinforcement to increase food consumption and reduce expulsion.

    OpenAIRE

    Coe, D A; Babbitt, R L; Williams, K E; Hajimihalis, C; Snyder, A M; Ballard, C; Efron, L A

    1997-01-01

    Extinction and reinforcement contingencies were used to treat 2 children with feeding disorders. Positive reinforcement and avoidance extinction effectively increased food acceptance but also increased food expulsion. Reduced expulsion and increased swallowing were achieved by repeated presentation of expelled food, a second extinction component

  16. Performance of balanced bellows safety relief valves

    International Nuclear Information System (INIS)

    Lai, Y.S.

    1992-01-01

    By the nature of its design, the set point and lift of a conventional spring loaded safety relief valve are sensitive to back pressure. One way to reduce the adverse effects of the back pressure on the safety relief valve function is to install a balanced bellows in a safety relief valve. The metallic bellows has a rather wide range of manufacturing tolerance which makes the design of the bellows safety relief valve very complicated. The state-of-the-art balanced bellows safety relief valve can only substantially minimize, but cannot totally eliminate the back pressure effects on its set point and relieving capacity. Set point change is a linear function of the back pressure to the set pressure ratio. Depending on the valve design, the set point correction factor can be either greater or smaller than unity. There exists an allowable back pressure and critical back pressure for each safety relief valve. When total back pressure exceeds the R a , the relieving capacity will be reduced mainly resulting from the valve lift being reduced by the back pressure and the capacity reduction factor should be applied in valve sizing. Once the R c is exceeded, the safety relief valve becomes unstable and loses its over pressure protection capability. The capacity reduction factor is a function of system overpressure, but their relationship is non-linear in nature. (orig.)

  17. The consequences of expansion joint bellows failure

    International Nuclear Information System (INIS)

    Miller, R.F.; Daugherty, W.L.

    1993-01-01

    Expansion joint (EJ) bellows are thin walled, flexible components of a piping system. As such, they usually are the weakest structural link in the pressure boundary from a failure probability perspective. Previously, a 360 degrees, circumferential rupture of a bellows was conservatively assumed to cause bellows collapse due to internal pressure resulting in a double-ended guillotine break (DEGB) and the associated, large leak rate. A finite element analysis was performed to determine the structural response of a ruptured bellows and its ability to resist large opening areas and hence, large leak rates. The results show that a 360 degrees break can lead to an opening width of up to 0.7 inch following an instantaneous rupture -- provided the equalizing rings and tie rods remain intact. This would result in an initial leak rate reduction equal to 80% of the previously assumed DEGB flow. The reduced flow rate is less than the water removal system capacity-assuring that flooding will not occur

  18. Bellows for the DEBENE SNR-Project

    International Nuclear Information System (INIS)

    Warmerdam, C.P.; Lievense, K.

    1980-01-01

    Liquid Metal cooled Fast Breeder Reactors (LMFBR) are designed to work at temperature levels up to 600 deg C. The components and piping systems are submitted to changing temperature fields varying between room temperature and temperatures in operational, incidental or accidental conditions. Bellows are generally used to introduce a higher flexibility of piping systems and for the leak tight connection of components with relative displacements. The total piping length of a loop type LMFBR is principally determined by thermal expansion requirements. The application of bellows could reduce piping length and building volume. In certain cases a reduction of the nozzle loads can be realized. In cooperation between Neratoom and TNO a feasibility study concerning the applicability of bellows as compensating elements in a primary piping system of a loop type LMFBR has been studied. Different configurations are compared with each other. TNO has performed dimension calculations, with the criteria from the ASME Code Section III and Code Case N-47, as guideline. In this paper a review of the results of these calculations will be given. The development of the expansion bellows, in the shells of the SNR 300 straight tube steam generators to compensate the difference in the thermal expansion between shell and tube bundle, has been concluded by a series of full scale fatigue tests under design conditions, except for the sodium environment. In this paper a summary is given of these tests and of the procedure used to prove that the bellows in the actual steam generators will withstand the design fatigue loads. (This is the LMFBR project of the DEBENE states: Federal Republic of Germany, Belgium and The Netherlands)

  19. Study on durability of welded bellows. Fatigue life of bellows with crack in welded bead

    International Nuclear Information System (INIS)

    Hirata, Osamu; Okada, Ken; Yanagisawa, Takasi; Nakajima, Akira.

    1994-01-01

    Reports of study for welded bellows with cracks have apparently not been published to date. The purpose of this investigation is to understand the relationship between the state of stress of welded bellows with micro cracks and the fatigue life. Stresses of welded bellows with cracks were calculated for several different crack lengths by finite element method (FEM), and lives of bellows with cracks were examined by fatigue test. The fatigue life, i.e. the number of cycles to failure was arranged against the remaining wall thickness measured after test instead of the crack length. As a result, it was found that there is a regular relationship between the stress amplitude of peak stress calculated by FEM and the fatigue life of bellows. And then, it was shown that the life of bellows becomes longer than the life estimated using a theoretical S-N curve calculated by Manson's method. Stress intensity factor range (ΔK) and crack propagation rate (da/dN) were also calculated using the results of stress analysis by FEM and fatigue test. The relationship between ΔK and da/dN obtained was almost coincident with the earlier result of fatigue crack growth test of Inconel 718 in the region of da/dN > 1.5x10 -6 mm/cycle, and the propriety of the present results was confirmed. (author)

  20. Numerical simulation of bellows effect on flow and separation of uranium isotopes in a supercritical gas centrifuge

    International Nuclear Information System (INIS)

    Borisevich, V.D.; Morozov, O.E.; Godisov, O.N.

    2000-01-01

    Numerical solving of the Navier-Stokes and convection-diffusion equations by the finite difference technique has been applied to study the influence of bellows on the flow and separation of uranium isotopes in a single supercritical gas centrifuge. Dependence of the separative power of a gas centrifuge on geometric parameters and position of a bellows on a rotor wall as well as the effect of scoop drag and feed flow on isotope separation in a gas centrifuge with a bellows have been obtained in computing experiments. It was demonstrated that increase of the separative power with increase of the gas centrifuge length is less considerable than predicted by the Dirac's law

  1. Development of nuclear quality high pressure valve bellows in Canada

    International Nuclear Information System (INIS)

    Janzen, P.; Astill, C.J.

    1978-06-01

    Concurrent with the decision to use bellows stem sealed nuclear valves where feasible in commercial-scale CANDU plants, AECL undertook to develop an indigenous high pressure valve bellows technology. This program included developing the capability to fabricate improved high pressure valve bellows in conjunction with a Canadian manufacturer. This paper describes the evolution of a two-stage bellows fabrication process involving: (1) manufacture of discrete lengths of precision thin wall telescoping tubes - from preparation of strip blanks through edge grinding and edge forming to longitudinal welding; (2) forming of bellows from tube assemblies using a novel combination of mechanical inward forming followed by hydraulic outward forming. Bellows of Inconel 600 and Inconel 625 have been manufactured and evaluated. Test results indicate comparable to improved performance over alternative high quality bellows. (author)

  2. Development of bellows for sodium valves in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Tanigawa, S; Mukai, K; Fukada, T; Takahashi, T

    1980-02-01

    Sodium valves for FBR are required to isolate sodium side from the atmosphere completely throughout its lifetime because of preventing sodium leakage with or without radioactivity. A great number of sodium valves have been used in FBR test facilities at O-arai Engineering Center of PNC and many troubles have occurred through their operational experience. Most of the cause of the troubles are the bellows failure followed by sodium leakage. A research and development program on bellows was started to clarify many uncertain factors of its performance and to establish the feasibility of bellows used in sodium. In this program Small Bellows Test Loop was built to perform low cycle fatigue tests on bellows under high temperature conditions. In this report some examples of the investigation of failed bellows occurred at O-arai Engineering Center of PNC are described. The research and development program on bellows is also explained with the summary of recent test results. (author)

  3. Experimental results from containment piping bellows subjected to severe accident conditions: Results from bellows tested in corroded conditions. Volume 2

    International Nuclear Information System (INIS)

    Lambert, L.D.; Parks, M.B.

    1995-10-01

    Bellows are an integral part of the containment pressure boundary in nuclear power plants. They are used at piping penetrations to allow relative movement between piping and the containment wall, while minimizing the load imposed on the piping and wall. Piping bellows are primarily used in steel containments; however, they have received limited use in some concrete (reinforced and prestressed) containments. In a severe accident they may be subjected to pressure and temperature conditions that exceed the design values, along with a combination of axial and lateral deflections. A test program to determine the leak-tight capacity of containment penetration bellows is being conducted at Sandia National Laboratories under the sponsorship of the US Nuclear Regulatory Commission. Several different bellows geometries, representative of actual containment bellows, have been subjected to extreme deflections along with pressure and temperature loads. The bellows geometries and loading conditions are described along with the testing apparatus and procedures. A total of nineteen bellows have been tested. Thirteen bellows were tested in ''like-new'' condition (results reported in Volume 1), and six were tested in a corroded condition. The tests showed that bellows in ''like-new'' condition are capable of withstanding relatively large deformations, up to, or near, the point of full compression or elongation, before developing leakage, while those in a corroded condition did not perform as well, depending on the amount of corrosion. The corroded bellows test program and results are presented in this report

  4. Increasing the Useful Life of Quench Reliefs with Inconel Bellows

    Energy Technology Data Exchange (ETDEWEB)

    Soyars, W. M. [Fermilab

    1999-01-01

    Reliable quench relief valves are an important part of superconducting magnet systems. Fermilab developed bellows-actuated cryogenic quench reliefs which have been in use since the early l 980's. The original design uses a stainless steel bellows. A high frequency, low amplitude vibration during relieving events has resulted in fatigue failures in the original design. To take advantage of the improved resistance to fatigue of Inconel, a nickel-chromium alloy, reliefs using Inconel 625 bellows were made. Design, development, and testing of the new version reliefs will be discussed. Tests show that relief valve lifetimes using Inconel bellows are more than five times greater than when using the original stainless steel bellows. Inconel bellows show great promise in increasing the lifetime of quench relief valves, and thus the reliability of accelerator cryogenic systems.

  5. Prototype bellows sealed nuclear valve development -reliability through testing

    International Nuclear Information System (INIS)

    Dixon, D.F.; Abbas, M.

    1978-01-01

    To assist in appraising bellows sealed valve performance, 10 tests were done on a ''1 in.'' prototype bellows sealed valve design. The tests simulated primary heat transport (PHT) system conditions for a 600 MWe CANDU-PHW. The design approach was to have all valve components outlast the bellows in endurance tests; this was achieved. The valve design meets the Atomic Energy of Canada Limited specification. For comparison, bellows fatigue failure data were fitted to both log-normal and Weibull distributions. A numerical example shows how to select valve stroke amplitude on the basis of valve flow requirement and the minimum acceptable fatigue life. (author)

  6. Bellows design and testing for KEKB

    Energy Technology Data Exchange (ETDEWEB)

    Suetsugu, Y [National Lab. for High Energy Physics, Tsukuba, Ibaraki (Japan)

    1996-08-01

    A bellows assembly with an RF-shield has been developed for the KEK B-Factory (KEKB). The RF-shield is a usual finger-type but has a special spring-finger to press the contact-finger on to the beam tube without fail. The mechanical workings of the RF-shield is tested using a trial model and no mechanical problem is found except for the dust production. The necessary contact force, 50 g/finger, is obtained experimentally transmitting the 508 MHz microwave up to 80 kW through the trial model. (author)

  7. Laser Cutting of Thin Nickel Bellows

    Science.gov (United States)

    Butler, C. L.

    1986-01-01

    Laser cutting technique produces narrow, precise, fast, and repeatable cuts in thin nickel-allow bellows material. Laser cutting operation uses intense focused beam to melt material and assisting gas to force melted material through part thickness, creating void. When part rotated or moved longitudinally, melting and material removal continuous and creates narrow, fast, precise, and repeatable cut. Technique used to produce cuts of specified depths less than material thickness. Avoids distortion, dents, and nicks produced in delicate materials during lathe trimming operations, which require high cutting-tool pressure and holding-fixture forces.

  8. Radiation corrosion in aluminum alloy bellows

    International Nuclear Information System (INIS)

    Konno, Osamu

    1987-01-01

    Testing was carried out in which materials for vacuum devices (Al, Ti, Cu, SUS) are exposed to electron beams (50 MeV, average current 80 μA) to determine the changes in the quantity, partial pressure and composition of the gases released from the materials. The test appratus used are made of Al alloys alone. During the test, vacuum leak is found in the Al alloy bellows used in the drive device. The leak is found to result from corrosion caused by water. The surface structure is analyzed by SEM, EPMA, ESCA and IMA. It is confirmed that the Al alloy used as material for the bellows if highly resistant to corrosion. It is concluded that it is necessary to use high purity cooling water to prevent the cooling water from causing corrosion. It has been reported that high purity aluminum is very high in resistance to corrosion. Based on these measurements and considerations, it is suggested that when aluminum is to be used as material for vacuum devices in an accelerator, it is required to provide protection film on its surface to prevent corrosion or to use cooling water pipes cladded with pure aluminum and an aluminum alloy. In addition, the temperature of the cooling water should be set after adequately considering the environmental conditions in the room. (Nogami, K.)

  9. A Complicated Personality in "Seize the Day" by Saul Bellow

    Science.gov (United States)

    Kalay, Faruk

    2015-01-01

    Saul Bellow, a distinctive prominent writer in American literature, is frequently concerned with the themes of Jewish culture, and alienation. In Bellow's novel "Seize the Day," Tommy Adler "the maladroit, suffering middle-aged hero of the book, is the pathetic heir in post-war fiction to the failure of the American Dream"…

  10. The testing of the Rectangular Pivot-point bellows for the PPPL Tokamak fusion test reactor

    International Nuclear Information System (INIS)

    Haughian, J.; Fong, M.; Greer, J.; Lou, K.; Scalise, D.T.

    1983-01-01

    The Neutral Beam Pivot Point Bellows (PPB) is installed in the duct which connects the Neutral Beam Enclosure to the Torus. This bellows, located at the pivot point, must fit the severely limited space available at the pivot-point location. Consequently, it has to be made rectangular in cross section with a large inside area for beam access. This leads to small convolutions with high stress concentrations. The function of the bellows is to permit change in the angular positioning of the neutral beam line with respect to the Tokamak, to isolate the Neutral Beam Line from the deflection of the Torus during bake out, and to allow for all misalignments. Internally the bellows will have a vacuum along with such gases such as hydrogen or deuterium. Externally, air or nitrogen gas will be present. It is constructed of Inconel 718 convolutions welded together to provide a clear rectangular opening of 23.4 by 32.2 inches, joined to a 625 Inconel flange at each end

  11. Design development of bellows for the DNB beam source

    International Nuclear Information System (INIS)

    Singh, Dhananjay Kumar; Venkata Nagaraju, M.; Joshi, Jaydeep; Patel, Hitesh; Yadav, Ashish; Pillai, Suraj; Singh, Mahendrajit; Bandyopadhyay, Mainak; Chakraborty, A.K.; Sharma, Dheeraj

    2017-01-01

    Establishing a procedure and mechanism for alignment of Ion beams in Neutral Beam (NB) sources for ITER like systems are complex due to large traversal distances (∼21 m) and restricted use of flexible elements into the system. For the beam source of DNB, movement requirements for beam alignment are the combination of tilting (±9mrad), rotation (±9mrad) and translation (±25mm). The present work describes the design development of a system composed of three single ply ‘Gimbal’ type bellow system, placed in series, in L-shaped hydraulic lines (size DN50, DN20 and DN15). The paper shall detail out the generation of initial requirements, transformation of movements at bellow locations, selection of bellows/combination of bellows, minimizing the induced movements by optimization of bellows location, estimation of movements through CEASAR II and the design compliance with respect to EJMA code

  12. Method for compensating bellows pressure loads while accommodating thermal deformations

    International Nuclear Information System (INIS)

    Woodle, M.H.

    1985-01-01

    Many metal bellows are used on storage ring vacuum chambers. They allow the ring to accommodate deformations associated with alignment, mechanical assembly and thermal expansion. The NSLS has two such electron storage rings, the vuv ring and the x-ray ring. Both rings utilize a number of welded metal bellows within the ring and at every beam port. There are provisions for 16 beam ports on the vuv and 28 ports in the x-ray ring. At each of these locations the bellows are acted on by an external pressure of 1 atmosphere, which causes a 520 lb reaction at the vacuum chamber beam port and at the beamline flange downstream of the bellows. The use of rigid tie rods across the bellows flanges to support this load is troublesome because most storage ring vacuum chambers are baked in situ to achieve high internal vacuum. Significant forces can develop on components if thermal deformation is restrained and damage could occur

  13. Specialists' meeting on bellows for sodium systems. Summary report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1980-02-01

    The Specialists' Meeting on Bellows for Sodium Systems was sponsored by the IAEA on the recommendation of the International Working Group on Fast Reactors (IWGFR) was attended by participants and observers from France, the Federal Republic of Germany, Italy, Japan, the Netherlands, the United Kingdom and the IAEA. The purpose of the meeting was to provide forum for exchanging views on application of bellows for FBR use, problems found in service in sodium systems, design and fabrication of bellows for sodium systems and studies necessary for estimation and improvement of reliability of bellows in long term use under the condition of high temperature sodium. The technical parts of the meeting were divided into five major sessions, as follows: Experience of Bellows Applications for Sodium Systems; Design and Analysis; Fabrication; In-Service Inspection and Repair; Research Work.

  14. Research and development of bellows for LMFBR in Japan

    International Nuclear Information System (INIS)

    Takahashi, T.; Mukai, K.; Yamamoto, K.

    1980-01-01

    Bellows are employed as useful mechanical elements with their flexibility and imperviousness to liquid and gas in the system in which such chemically active substances as sodium are handled. Since the early time of development of Japanese LMFBR, bellows have been used e.g. for the shaft seal of small sodium valves. Bellows are employed in the fast experimental reactor JOYO which is now in operation and the fast prototype reactor MONJU whose design program is in final stage at the following parts: control rod drive mechanism; intermediate heat exchanger; small valve; mechanical penetration assembly of the containment boundary; outer piping of the double-walled primary system (for JOYO only). In addition, the application of bellows as thermal expansion joint to the main piping system is under consideration for future FBRs. This paper outlines the research and development work on bellows for FBR use in Japan. (author)

  15. Research and development of bellows for LMFBR in Japan

    International Nuclear Information System (INIS)

    Takahashi, Tadao; Mukai, Kazuo; Yamamoto, Ken.

    1979-11-01

    The bellows is employed as a useful mechanical element with its flexibility and imperviousness to liquid and gas in the system in which such chemically active substance as sodium is handled. Since the early time of development of Japanese LMFBR, bellows have been used e.g. for the shaft seal of small sodium valves. Bellows are employed in the fast experimental reactor JOYO which is now in operation and the fast prototype reactor MONJU whose design program is in final stage at the following parts: - control rod drive mechanism, - intermediate heat exchanger, - small valve, - mechanical penetration assembly of the containment boundary, - outer piping of the double-walled primary system (for JOYO only). In addition, the application of bellows as thermal expansion joint to the main piping system is under consideration for future FBRs. This paper outlines the research and development work on bellows for the FBR use in Japan. (author)

  16. 3-D Printed Biocompatible Micro-Bellows Membranes

    KAUST Repository

    Moussi, Khalil

    2018-04-11

    Bellows membranes are essential elements in many actuator devices. Currently, the size, shape, and dimensions of bellows membranes are limited by the fabrication process constraints. Miniaturizing the bellows membranes is a prerequisite for the development of integrated systems with novel capabilities as needed, for example, in advanced biomedical devices. Using a two-photon polymerization, 3-D printing technique, we present a high-resolution, high-yield, and customizable manufacturing process to produce Parylene C micro-bellows. An optimization of the crucial design parameters is performed using finite element modeling from which designs with high deflection and low stress were obtained. Different micro-bellows designs are fabricated and characterized. The total volume of the fabricated models ranges from 3 to 0.3 mm³ and the minimum feature size is 60 μm. The achieved cumulative deflection ranges from 300 to 570 μm. [2017-0307

  17. Specialists' meeting on bellows for sodium systems. Summary report

    International Nuclear Information System (INIS)

    1980-02-01

    The Specialists' Meeting on Bellows for Sodium Systems was sponsored by the IAEA on the recommendation of the International Working Group on Fast Reactors (IWGFR) was attended by participants and observers from France, the Federal Republic of Germany, Italy, Japan, the Netherlands, the United Kingdom and the IAEA. The purpose of the meeting was to provide forum for exchanging views on application of bellows for FBR use, problems found in service in sodium systems, design and fabrication of bellows for sodium systems and studies necessary for estimation and improvement of reliability of bellows in long term use under the condition of high temperature sodium. The technical parts of the meeting were divided into five major sessions, as follows: Experience of Bellows Applications for Sodium Systems; Design and Analysis; Fabrication; In-Service Inspection and Repair; Research Work

  18. Experimental study on external condensation heat transfer characteristics of bellows

    International Nuclear Information System (INIS)

    Feng Dianyi; Hu Jiansheng

    2008-01-01

    Flow model and heat transfer of condensation flow outside of bellows have been theoretically and experimentally studied. The formula for calculation of condensation heat transfer coefficient was deduced, and corrected through experiment. The calculation results are accordant with the experimental ones, and the errors is less than 10%. The effect of bellows structure parameters and pipe diameter on the enhancement heat transfer has been investigated. It is found that in the steady flow region, the average condensation heat transfer coefficient in a bellows is 3 ∼ 5 times than that in a straight tube under the same conditions, and when considering the increasing in heat transfer area, the effectiveness of enhancement heat transfer is 5 ∼ 7 times than that in a straight tube. To facilitate the engineering design and application of bellows, the formula for the calculation of the average heat transfer coefficient of a fluid in a bellows was also given. (authors)

  19. Experimental and Numerical analysis of Metallic Bellow for Acoustic Performance

    Science.gov (United States)

    Panchwadkar, Amit A.; Awasare, Pradeep J., Dr.; Ingle, Ravidra B., Dr.

    2017-08-01

    Noise will concern about the work environment of industry. Machinery environment has overall noise which interrupts communication between the workers. This problem of miscommunication and health hazard will make sense to go for noise attenuation. Modification in machine setup may affect the performance of it. Instead of that, Helmholtz resonator principle will be a better option for noise reduction along the transmission path. Resonator has design variables which gives resonating frequency will help us to confirm the frequency range. This paper deals with metallic bellow which behaves like inertial mass under incident sound wave. Sound wave energy is affected by hard boundary condition of resonator and bellow. Metallic bellow is used in combination with resonator to find out Transmission loss (TL). Microphone attachment with FFT analyzer will give the frequency range for numerical analysis. Numerical analysis of bellow and resonator is carried out to summarize the acoustic behavior of bellow. Bellow can be numerically analyzed to check noise attenuation for centrifugal blower. An impedance tube measurement technique is performed to validate the numerical results for assembly. Dimensional and shape modification can be done to get the acoustic performance of bellow.

  20. Manufacture and test of seismic bellows for ITER magnet feeder

    International Nuclear Information System (INIS)

    Liu, Chen; Lu, Kun; Sheng, Liang; Song, Yuntao; Su, Jinjin; Su, Man; Gung, Chenyu

    2016-01-01

    Highlights: • The design of the double bellows was iterated with the results of analysis based on the Expansion Joint Manufacturers Association (EJMA) standard. • The seismic bellows was tested with cyclic pressurization of the interlayer space to 2 bars absolute pressure for 5 cycles. • 200 cycles of tensile fatigue test with 90 mm of stretching from the nominal design length. • A full tensile test with 315 mm of stretching from its nominal length was conducted. • The prototype bellows was qualified for its leak tightness (less than 1 × 10 −9 Pam 3 /s of helium) at all time during the qualification test. - Abstract: This paper presents the key manufacturing and testing processes of the prototype ITER feeder seismic bellows. The design of the double bellows was iterated with the results of analysis based on the Expansion Joint Manufacturers Association (EJMA) standard. Each inner and outer bellows was supported in dedicated molds and formed by a hydraulic pressure machine rated at 800 tons. The double bellows were constructed by welding individual collars to the end flanges. The seismic bellows was tested with cyclic pressurization of the interlayer space to 2 bars absolute pressure for 5 cycles. This was followed by 200 cycles of tensile fatigue test with 90 mm of stretching from the nominal design length. After the mechanical fatigue test, a full tensile test with 315 mm of stretching from its nominal length was conducted. Helium leak tests, with the sensitivity of the helium leak detector set to 1 × 10 −9 Pa m 3 /s of helium, were performed at different stages of pressure and mechanical tests. The prototype bellows was qualified for its leak tightness at all time during the qualification test.

  1. Manufacture and test of seismic bellows for ITER magnet feeder

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Chen, E-mail: liuchen@ipp.ac.cn [Institute of Plasma Physics Chinese Academy of Sciences, ShuShanhu Road No. 350, Hefei (China); Lu, Kun [Institute of Plasma Physics Chinese Academy of Sciences, ShuShanhu Road No. 350, Hefei (China); Sheng, Liang [AEROSUN-TOLA Expansion Joint Co., Ltd., Jiangjun Road No. 199, Nanjing (China); Song, Yuntao; Su, Jinjin [Institute of Plasma Physics Chinese Academy of Sciences, ShuShanhu Road No. 350, Hefei (China); Su, Man; Gung, Chenyu [ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St. Paul-lez-Durance (France)

    2016-11-01

    Highlights: • The design of the double bellows was iterated with the results of analysis based on the Expansion Joint Manufacturers Association (EJMA) standard. • The seismic bellows was tested with cyclic pressurization of the interlayer space to 2 bars absolute pressure for 5 cycles. • 200 cycles of tensile fatigue test with 90 mm of stretching from the nominal design length. • A full tensile test with 315 mm of stretching from its nominal length was conducted. • The prototype bellows was qualified for its leak tightness (less than 1 × 10{sup −9} Pam{sup 3}/s of helium) at all time during the qualification test. - Abstract: This paper presents the key manufacturing and testing processes of the prototype ITER feeder seismic bellows. The design of the double bellows was iterated with the results of analysis based on the Expansion Joint Manufacturers Association (EJMA) standard. Each inner and outer bellows was supported in dedicated molds and formed by a hydraulic pressure machine rated at 800 tons. The double bellows were constructed by welding individual collars to the end flanges. The seismic bellows was tested with cyclic pressurization of the interlayer space to 2 bars absolute pressure for 5 cycles. This was followed by 200 cycles of tensile fatigue test with 90 mm of stretching from the nominal design length. After the mechanical fatigue test, a full tensile test with 315 mm of stretching from its nominal length was conducted. Helium leak tests, with the sensitivity of the helium leak detector set to 1 × 10{sup −9} Pa m{sup 3}/s of helium, were performed at different stages of pressure and mechanical tests. The prototype bellows was qualified for its leak tightness at all time during the qualification test.

  2. Dynamic Instability of Undamped Bellows Face Seals in Cryogenic Liquid

    National Research Council Canada - National Science Library

    Hudelson, John C

    1966-01-01

    .... Subminiature accelerometers were attached to the nosepiece of a 1 3/4-inch nominal shaft diameter bellows seal and the accelerations and frequencies recorded on magnetic tape for analysis at an expanded time factor...

  3. CNEN experience on bellows for sodium system

    International Nuclear Information System (INIS)

    Gai, A.; Casalini, P.

    1980-01-01

    In Italy work on the breeder reactors is being carried out in three main areas: The PEC reactor; Construction of the components for the Creys-Malville plant, the testing in support of this, and work on the SPX reactor; Standardized industrial supplies. With regard to the PEC reactor, design work for the system and a part of the components is being conducted mainly in Italy by CNEN and NIRA, with the experimental testing in support being conducted in Italy and abroad. With regard to the Creys-Malville plant and the SPX reactor programs, activities for the supply of the components and testing in support of them are being conducted within a tight framework of agreements between the research organizations and Italian and French industries. Finally, the standardized industrial supplies are developing autonomously, without any major research and development involvement. The differences in methodologies, procedures and organizations involved in the three above mentioned work areas and the relative limitation of activities conducted in the breeder reactor area in Italy have made the carrying out of a systematic, organic program for the use of sodium bellows impossible. In particular, until today no sodium testing program has been carried out on this component in Italy

  4. CNEN experience on bellows for sodium system

    Energy Technology Data Exchange (ETDEWEB)

    Gai, A; Casalini, P

    1980-02-01

    In Italy work on the breeder reactors is being carried out in three main areas: The PEC reactor; Construction of the components for the Creys-Malville plant, the testing in support of this, and work on the SPX reactor; Standardized industrial supplies. With regard to the PEC reactor, design work for the system and a part of the components is being conducted mainly in Italy by CNEN and NIRA, with the experimental testing in support being conducted in Italy and abroad. With regard to the Creys-Malville plant and the SPX reactor programs, activities for the supply of the components and testing in support of them are being conducted within a tight framework of agreements between the research organizations and Italian and French industries. Finally, the standardized industrial supplies are developing autonomously, without any major research and development involvement. The differences in methodologies, procedures and organizations involved in the three above mentioned work areas and the relative limitation of activities conducted in the breeder reactor area in Italy have made the carrying out of a systematic, organic program for the use of sodium bellows impossible. In particular, until today no sodium testing program has been carried out on this component in Italy.

  5. Analysis and optimization of bellows with general shape

    International Nuclear Information System (INIS)

    Koh, B.K.; Park, G.J.

    1998-01-01

    Bellows are commonly used in piping systems to absorb expansion and contraction in order to reduce stress. They have widespread applications which include industrial and chemical plants, fossil and nuclear power systems, heating and cooling systems, and vehicle exhaust systems. A bellows is a component in piping systems which absorbs mechanical deformation with flexibility. Its geometry is an axially symmetric shell which consists of two toroidal shells and one annular plate or conical shell. In order to analyze the bellows, this study presents the finite element analysis using a conical frustum shell element. A finite element analysis program is developed to analyze various bellows. The formula for calculating the natural frequency of bellows is made by the simple beam theory. The formula for fatigue life is also derived by experiments. A shape optimal design problem is formulated using multiple objective optimization. The multiple objective functions are transformed to a scalar function with weighting factors. The stiffness, strength, and specified stiffness are considered as the multiple objective function. The formulation has inequality constraints imposed on the natural frequencies, the fatigue limit, and the manufacturing conditions. Geometric parameters of bellows are the design variables. The recursive quadratic programming algorithm is utilized to solve the problem

  6. Geometry and design of origami bellows with tunable response

    Science.gov (United States)

    Reid, Austin; Lechenault, Frederic; Rica, Sergio; Adda-Bedia, Mokhtar

    2017-01-01

    Origami folded cylinders (origami bellows) have found increasingly sophisticated applications in space flight and medicine. In spite of this interest, a general understanding of the mechanics of an origami folded cylinder has been elusive. With a newly developed set of geometrical tools, we have found an analytic solution for all possible cylindrical rigid-face states of both Miura-ori and triangular tessellations. Although an idealized bellows in both of these families may have two allowed rigid-face configurations over a well-defined region, the corresponding physical device, limited by nonzero material thickness and forced to balance hinge and plate-bending energy, often cannot stably maintain a stowed configuration. We have identified the parameters that control this emergent bistability, and we have demonstrated the ability to design and fabricate bellows with tunable deployability.

  7. Ageing study of Cirus reactor vessel expansion bellow

    International Nuclear Information System (INIS)

    Ramana, W.V.; Dutta, B.K.; Kushwaha, H.S.; Sahu, A.K.; Bhatnagar, A.; Pant, R.C.

    1994-01-01

    Expansion bellow of Cirus reactor vessel is a comparatively weak component which is joined to top tube sheet and shell by helium tight lap weld. This has been subjected to thermal stress caused by high temperature during reactor operation and thermal shock due to trip or shutdown. Therefore a finite element analysis was carried out to assess thermal stresses and fatigue life of the component. It was found that the fluctuating stress in the bellow is far less than its endurance limit. (author). 2 tabs., 3 figs

  8. The expulsion of Jesuits from Nueva Granada in 185Oas key for understanding

    Directory of Open Access Journals (Sweden)

    José David Cortés Guerrero

    2003-01-01

    Full Text Available This article shows the confrontation between the liberal ideology of the mid nineteenth century and the conservative positions of the time as a result of the expulsion of the Society of Jesus from the Nueva Granada. The expulsion of the Jesuits encapsulates several key aspects of liberal ideology: the need to break with the colonial past; progress and civilization as attainable objectives; education as a neutral in terms of religious instruction; and the separation of the Catholic Church from the State as an important factor for reaching modernization and modernity. With the expulsion of the Jesuits one can also see the aligning of the nascent political parties, some defended the expulsión, others opposed it vehemently.

  9. SMA bellows as reversible thermal sensors/actuators

    International Nuclear Information System (INIS)

    Damanpack, A R; Bodaghi, M; Liao, W H

    2015-01-01

    In this paper, the feasibility of reversible bellows made of shape memory alloys (SMAs) in sensory and actuated applications to transfer pressure and/or temperature into a linear motion is investigated. An analytical three-dimensional model is developed to simulate key features of SMAs including martensitic transformation, reorientation of martensite variants, the shape memory effect, and pseudo-elasticity. Axisymmetric two-dimensional theory of thermo-inelasticity based on the non-linear Green–Lagrange strain tensor is employed to derive the equilibrium equations. A finite element method along with an iterative incremental elastic-predictor–inelastic-corrector procedure is developed to solve the governing equations with both material and geometrical non-linearities. The feasibility of reversible SMA bellows in transferring pressure and/or temperature into a linear motion is numerically demonstrated. In this respect, the effects of geometric parameters, magnitude of thermo-mechanical loadings and end conditions on the performances of SMA bellows are evaluated and discussed in depth. This study provides pertinent results toward an efficient and reliable design of reversible thermally-driven SMA bellows. (paper)

  10. Win, Lose, and Drawing Conclusions: Bellows, Boxing, and Progressivism.

    Science.gov (United States)

    Adams, Peter A.

    1992-01-01

    Presents a lesson plan in which George Bellows's painting "Both Members of this Club" is analyzed as a historical document illustrating the Progressive movement. Suggests that the lesson can introduce students to a different form of historical communication. Includes background information and procedures for approaching the lesson.…

  11. Instabilities of bellows: Dependence on internal pressure, end supports, and interactions in accelerator magnet systems

    International Nuclear Information System (INIS)

    Shutt, R.P.; Rehak, M.L.

    1990-01-01

    For superconducting magnets, one needs many bellows for connection of various helium cooling transfer lines in addition to beam tube bellows. There could be approximately 10,000 magnet interconnection bellows in the SSC exposed to an internal pressure. When axially compressed or internally pressurized, bellows can become unstable, leading to gross distortion or complete failure. If several bellows are contained in an assembly, failure modes might interact. If designed properly, large bellows can be a very feasible possibility for connecting the large tubular shells that support the magnet iron yokes and superconducting coils and contain supercritical helium for magnet cooling. We present here (1) a spring-supported bellows model, in order to develop necessary design features for bellows and end supports so that instabilities will not occur in the bellows pressure operating region, including some margin, (2) a model of three superconducting accelerator magnets connected by two large bellows, in order to ascertain that support requirements are satisfied and in order to study interaction effects between the two bellows. Reliability of bellows for our application will be stressed. 3 refs., 4 figs

  12. Tests of expansion bellows - IWK bellow with a 300 mm diameter; Essais de soufflets de dilatation - Soufflet IWK de 300 mm de diametre

    Energy Technology Data Exchange (ETDEWEB)

    Foglia, S.; Roche, R.

    1958-12-15

    This document comprises two technical notes. In the first one, and after having recalled test objectives, the authors present bellow characteristics as they are specified in various documents, and present the test program. They describe the actual geometry of a bellow wave. They present metal characteristics (yield strength and elasticity modulus), and bellow characteristics under compression, and indicate how these characteristics are studied. They discuss how the bellow reacts to pressure and indicate additional tests which have been designed to study this reaction. The bellow mechanical strength to internal pressure is also addressed. They finally report the interpretation of obtained results, and a comparison with the basic theory. The second document recalls objective and principles of new tests performed on bellows, indicates the various planned tests, indicates results obtained by failure tests, recalls some vocabulary related to occurring phenomena, and gives a summarized description of tests (first compression, return to initial status, and again until a fourth compression). Results are then discussed.

  13. Experimental results from containment piping bellows subjected to severe accident conditions. Volume 1, Results from bellows tested in 'like-new' conditions

    International Nuclear Information System (INIS)

    Lambert, L.D.; Parks, M.B.

    1994-09-01

    Bellows are an integral part of the containment pressure boundary in nuclear power plants. They are used at piping penetrations to allow relative movement between piping and the containment wall, while minimizing the load imposed on the piping and wall. Piping bellows are primarily used in steel containments; however, they have received limited use in some concrete (reinforced and prestressed) containments. In a severe accident they may be subjected to pressure and temperature conditions that exceed the design values, along with a combination of axial and lateral deflections. A test program to determine the leak-tight capacity of containment penetration bellows is being conducted under the sponsorship of the US Nuclear Regulatory Commission at Sandia National Laboratories. Several different bellows geometries, representative of actual containment bellows, have been subjected to extreme deflections along with pressure and temperature loads. The bellows geometries and loading conditions are described along with the testing apparatus and procedures. A total of thirteen bellows have been tested, all in the 'like-new' condition. (Additional tests are planned of bellows that have been subjected to corrosion.) The tests showed that bellows are capable of withstanding relatively large deformations, up to, or near, the point of full compression or elongation, before developing leakage. The test data is presented and discussed

  14. Does Pelvic Organ Prolapse Relate with Expulsion of Intrauterine Devices?

    Directory of Open Access Journals (Sweden)

    Mehmet Çınar

    2016-08-01

    CONCLUSION: As interestingly; we found that POP-Q assessment should be a promising marker in predicting IUD expulsion. To the best of our knowledge, this is the first study with a such result, therefore POP-Q evaluation should be a useful parameter for future IUD expulsion.

  15. A Complicated Personality in Seize The Day By Saul Bellow

    Directory of Open Access Journals (Sweden)

    Faruk Kalay

    2015-02-01

    Full Text Available Saul Bellow, a distinctive prominent writer in American literature, is frequently concerned with the themes of Jewish culture, and alienation. In Bellow’s novel Seize the Day, Tommy Adler “the maladroit, suffering middle-aged hero of the book, is the pathetic heir in post-war fiction to the failure of the American Dream” (Richmond 15. Tommy abandons his family and endeavors to emulate his father. However, his father’s perfectionism and preference for avoidance of his son lead to the protagonist’s physical and psychological alienation. Furthermore, the resemblance of their lifestyles and attitudes indicates that their consciousness, sub-conscious, and psychologies follow the same routine. This study will therefore argue the novel’s psychoanalytic characteristics. Keywords: Mind Structure, Personality, Psychoanalysis, Saul Bellow, Seize the Day, Tommy Adler, Wilhelm Adler

  16. A MEMS Electrochemical Bellows Actuator for Fluid Metering Applications

    Science.gov (United States)

    Sheybani, Roya; Gensler, Heidi; Meng, Ellis

    2013-01-01

    We present a high efficiency wireless MEMS electrochemical bellows actuator capable of rapid and repeatable delivery of boluses for fluid metering and drug delivery applications. Nafion®-coated Pt electrodes were combined with Parylene bellows filled with DI water to form the electrolysis-based actuator. The performance of actuators with several bellows configurations was compared for a range of applied currents (1-10 mA). Up to 75 boluses were delivered with an average pumping flow rate of 114.40 ± 1.63 μL/min. Recombination of gases into water, an important factor in repeatable and reliable actuation, was studied for uncoated and Nafion®-coated actuators. Real-time pressure measurements were conducted and the effects of temperature, physiological back pressure, and drug viscosity on delivery performance were investigated. Lastly, we present wireless powering of the actuator using a class D inductive powering system that allowed for repeatable delivery with less than 2% variation in flow rate values. PMID:22833156

  17. Experiments to evaluate behavior of containment piping bellows under severe accident conditions

    International Nuclear Information System (INIS)

    Lambert, L.D.; Parks, M.B.

    1993-01-01

    Bellows are an integral part of the containment pressure boundary in nuclear power plants. They are used at piping penetrations to allow relative movement between piping and the containment wall. In a severe accident they may be subjected to high pressure and temperature, and a combination of axial and lateral deflections. A test program to determine the leak-tight capacity of containment penetration bellows is being conducted at Sandia National Laboratories, Albuquerque, New Mexico. Several different bellows geometries, representative of actual containment bellows, are being subjected to extreme deflections along with pressure and temperature loads. The bellows geometries and loading conditions are described along with the testing apparatus and procedures. A total of thirteen tests have been conducted. The tests showed that withstanding relatively large bellows are capable of deformations, up to, or near, the point of full compression before developing leakage. The test data is presented and discussed

  18. Examination of corrosion on primary selector valve bellows

    International Nuclear Information System (INIS)

    Rickards, G.K.

    1975-07-01

    The stainless steel bellows of the primary selector valves from the burst can detection system of the Sizewell 'A' reactor were found to have spots of corrosion. These corrosion spots were thought to be caused by the cleaning process employed during manufacture. Samples subjected to the manufacturing cleaning process were examined in the scanning electron microscope equipped with an X-ray energy dispersive analysis system. The corrosion was shown to be associated with the acid cleaning process employed. Deposits were also left on samples not acid cleaned and it is suggested that these have come from contaminated washing water. (author)

  19. Spontaneous expulsive suprachoroidal hemorrhage caused by decompensated liver disease

    Directory of Open Access Journals (Sweden)

    Krishnagopal Srikanth

    2013-01-01

    Full Text Available Expulsive suprachoroidal hemorrhage can be surgical or spontaneous. Spontaneous expulsive suprachoroidal hemorrhage (SESCH is a rare entity. Most of the reported cases of SESCH were caused by a combination of corneal pathology and glaucoma. We are reporting a rare presentation of SESCH with no pre-existing glaucoma or corneal pathology and caused by massive intra- and peri-ocular hemorrhage due to decompensated liver disease.

  20. Medical expulsive treatment of distal ureteral stone using tamsulosin

    International Nuclear Information System (INIS)

    Ahmad, H.; Azim, W.; Akmal, M.; Murtaza, B.

    2015-01-01

    Many minimally invasive interventional techniques as well as expectant treatments exist for the management of lower ureteric calculi. This study was conducted to evaluate the efficacy of tamsulosin as an expulsive pharmacologic therapy for the treatment of distal ureteral stone. Methods: This randomized control trial included 100 patients over 18 years of age with stone Size = 8mm in distal 1/3 of ureter. Patients were randomly assigned into two groups (A and B). Group A Patients were given Capsule Tamsulosin 0.4 mg, 1 daily up to 4 weeks while group B patients were given placebo, 1 Capsule daily up to 4 weeks. The primary endpoint was expulsion rate. A written informed consent was taken from all the patients. Expulsion time, need for analgesics, need for hospitalization and drug side effects were secondary endpoints. Results: A total of 49 patients in group A and 48 patients in group B reported back, therefore 97 out of 100 patients were evaluated. Mean age of the patients was 36.34 years (range 18-57 years). Mean stone size was 5.78 mm (range 4-8 mm) in greatest dimension. A stone expulsion rate of 85.71% (42 patients) was noted in group A and 54.20% (26 patients) in group B. Group A revealed a statistically significant advantage in term of stone expulsion rate (p=0.032). Considering expulsion time in days group A showed statistically significant advantage (p=0.015). Regarding age, sex, stone size and stone lateralization (right/left), there was no significant difference between the group A and B. No drug side effects were noted in both the groups. Conclusion: By using tamsulosin a higher stone expulsion rates can be achieved in a shorter time. More randomized control trials are required to establish tamsulosin as a standard medical expulsive treatment for small distal ureteric calculus. (author)

  1. Late Complication after Superficial Femoral Artery (SFA) Aneurysm: Stent-graft Expulsion Outside the Skin

    Energy Technology Data Exchange (ETDEWEB)

    Pecoraro, Felice, E-mail: felicepecoraro@libero.it; Sabatino, Ermanno R.; Dinoto, Ettore; Rosa, Giuliana La; Corte, Giuseppe; Bajardi, Guido [University of Palermo, Vascular Surgery Unit (Italy)

    2015-10-15

    A 78-year-old man presented with a 7-cm aneurysm in the left superficial femoral artery, which was considered unfit and anatomically unsuitable for conventional open surgery for multiple comorbidities. The patient was treated with stent-graft [Viabhan stent-graft (WL Gore and Associates, Flagstaff, AZ)]. Two years from stent-graft implantation, the patient presented a purulent secretion and a spontaneous external expulsion through a fistulous channel. No claudication symptoms or hemorrhagic signs were present. The pus and device cultures were positive for Staphylococcus aureus sensitive to piperacillin/tazobactam. Patient management consisted of fistula drainage, systemic antibiotic therapy, and daily wound dressing. At 1-month follow-up, the wound was closed. To our knowledge, this is the first case of this type of stent-graft complication presenting with external expulsion.

  2. Operating experience with small diameter bellows used in the Phenix and Rapsodie reactors, and in sodium test facilities

    International Nuclear Information System (INIS)

    Allegre, P.; Jacquelin, R.; Carbonnier, J.L.

    1980-01-01

    In the Rapsodie and Phenix fast breeder reactors, small diameter bellows are used on the control rod mechanisms and on some valves. The Valve bellows sustain slow longitudinal movements with stroke/length ratios of about 0.3, and hydroformed bellows are suitable for this application. The control rod mechanism bellows are subjected to greater length variations (ΔL/L>0.5) including fast drops, so that welded disk models are used

  3. Medical expulsive therapy for distal ureteric stones: tamsulosin versus silodosin

    Directory of Open Access Journals (Sweden)

    Vittorio Imperatore

    2014-06-01

    Full Text Available Objectives: To compare the efficacy and safety of tamsulosin and silodosin in the context of medical expulsive therapy (MET of distal ureteric stones. Patients and methods: Observational data were collected retrospectively from patients who received silodosin (N = 50 or tamsulosin (N = 50 as MET from January 2012 to January 2013. Inclusion criteria were: patients aged ≥ 18 years with a single, unilateral, symptomatic, radiopaque ureteric stone of 10 mm or smaller in the largest dimension located between the lower border of the sacroiliac joint and the vesico-ureteric junction. Stone expulsion rate, stone expulsion time, number of pain episodes, need for analgesics use, incidence of side effects were compared. Results: Stone-expulsion rate in the silodosin and in the tamsulosin groups were 88% and 82%, respectively (p not significant. Mean expulsion times were 6.7 and 6.5 days in the silodosin and tamsulosin group, respectively (p not significant. Mean number of pain episodes were 1.6 and 1.7 in the silodosin and tamsulosin group, respectively (p not significant. The mean number of analgesic requirement was 0.84 and 0.9 for the silodosin and tamsulosin group, respectively (p not significant. Overall, incidence of side effects was similar in both groups. Patients taking silodosin experienced an higher incidence of retrograde ejaculation but a lower incidence of side effects related to peripheral vasodilation when compared to patients taking tamsulosin. Subgroup analysis demonstrated significantly lower mean expulsion times and pain episodes in patients with stones ≤ 5 mm in both groups. Conclusions: Tamsulosin and silodosin are equally effective as MET for distal ureteric stones sized 10 mm or smaller. MET with silodosin is associatd with a lower incidence of side effects related to peripheral vasodilation but an higher incidence of retrograde ejaculation when compared to tamsulosin.

  4. Medical expulsive therapy for distal ureteric stones: tamsulosin versus silodosin.

    Science.gov (United States)

    Imperatore, Vittorio; Fusco, Ferdinando; Creta, Massimiliano; Di Meo, Sergio; Buonopane, Roberto; Longo, Nicola; Imbimbo, Ciro; Mirone, Vincenzo

    2014-06-30

    To compare the efficacy and safety of tamsulosin and silodosin in the context of medical expulsive therapy (MET) of distal ureteric stones. Observational data were collected retrospectively from patients who received silodosin (N = 50) or tamsulosin (N = 50) as MET from January 2012 to January 2013. Inclusion criteria were: patients aged ≥ 18 years with a single, unilateral, symptomatic, radiopaque ureteric stone of 10 mm or smaller in the largest dimension located between the lower border of the sacroiliac joint and the vesico-ureteric junction. Stone expulsion rate, stone expulsion time, number of pain episodes, need for analgesics use, incidence of side effects were compared. Stone-expulsion rate in the silodosin and in the tamsulosin groups were 88% and 82%, respectively (p not significant). Mean expulsion times were 6.7 and 6.5 days in the silodosin and tamsulosin group, respectively (p not significant). Mean number of pain episodes were 1.6 and 1.7 in the silodosin and tamsulosin group, respectively (p not significant). The mean number of analgesic requirement was 0.84 and 0.9 for the silodosin and tamsulosin group, respectively (p not significant). Overall, incidence of side effects was similar in both groups. Patients taking silodosin experienced an higher incidence of retrograde ejaculation but a lower incidence of side effects related to peripheral vasodilation when compared to patients taking tamsulosin. Subgroup analysis demonstrated significantly lower mean expulsion times and pain episodes in patients with stones ≤ 5 mm in both groups. Tamsulosin and silodosin are equally effective as MET for distal ureteric stones sized 10 mm or smaller. MET with silodosin is associatd with a lower incidence of side effects related to peripheral vasodilation but an higher incidence of retrograde ejaculation when compared to tamsulosin.

  5. Experimental evaluation of torsional fatigue strength of welded bellows and application to design of fusion device

    International Nuclear Information System (INIS)

    Takatsu, Hideyuki; Yamamoto, Masahiro; Shimizu, Masatsugu; Suzuki, Kazuo; Sonobe, Tadashi; Hayashi, Yuzo; Mizuno, Gen-ichiro.

    1984-01-01

    Torsional fatigue strength of the welded bellows was evaluated experimentally, aiming the application to a port of a fusion device. The welded bellows revealed elastic torsional buckling and spiral distorsion even under a small angle of torsion. Twisting load never leads the welded bellows to fracture easily so far as the angle of torsion is not excessively large, and the welded bellows has the torsional fatigue strength much larger than that expected so far. Two formulae were proposed to evaluate the stress of the welded bellows under the forced angle of torsion; shearing stress evaluation formula in the case that torsional buckling does not occur and the axial bending stress evaluation formula in the case that torsional buckling occurs. And the results of the torsional fatigue experiments showed that the former is reasonably conservative and simulates the actual behavior of the welded bellows better than the latter in the high cycle fatigue region and vice versa in the low cycle fatigue region from the viewpoint of the mechanical design. The present evaluation method of the torsional fatigue strength was applied to the welded bellows for the port of the JT-60 vacuum vessel and its structural integrity was confirmed under the design load condition. (author)

  6. Honig v. Doe: the suspension and expulsion of handicapped students.

    Science.gov (United States)

    Yell, M L

    1989-09-01

    Public Law 94-142 provides for a free appropriate public education for all handicapped children, but does not address the issue of disciplining handicapped students. The result has been confusion and uncertainty, particularly concerning expulsion and suspension. The courts have been forced into this vacuum, acting as arbiters. The Supreme Court's ruling in Honig v. Doe will help to delineate the proper role of educators in the suspension and expulsion of handicapped students. This article examines that role and offers recommendations for school policies regarding the discipline of handicapped students.

  7. Experimental verification of the axial and lateral stiffness of large W7-X rectangular bellows

    International Nuclear Information System (INIS)

    Reich, J.; Cardella, A.; Koppe, T.; Missal, B.; Capriccioli, A.; Loehrer, W.; Langone, S.; Sassone, P.C.

    2006-01-01

    The WENDELSTEIN 7-X (W7-X) is a super-conducting helical advanced stellarator. W7-X is provided with 299 ports, which connect the plasma vessel with the outer vessel. All the ports are equipped with bellows, which, during bake-out and final adjustment, compensate the relative movements of the vessels. The bellows have different shapes and dimensions ranging from 100 mm circular to 1170 x 570 mm rectangular sizes. During various load-cases the axial and lateral stiffness of all bellows will create a resulting spring-force which acts on the supports of the vessels directly. The higher the stiffness the more is the significant influence on the supports. The lateral stiffness which was calculated with the established standard EJMA-code (Expansion Joint Manufacturers Association) seemed to be relatively small. This appeared to be not correct in particular for non circular bellows. That is why the stiffness of rectangular, multi-layer bellows have then been re-calculated with the Finite Element Method (FEM) code ANSYS. The maximum difference between the FEM and EJMA code resulted to be up to 250 % in particular with movements along the longer side of the bellows. In order to clarify the differences a test-campaign with the largest rectangular bellows was performed. A special test rack allowed predefined displacements in pure lateral and axial directions taking into consideration of the friction in the moving elements. During the tests the load-displacement diagram was recorded permanently. The outcome of the FEM-results was then verified by the tests in axial and lateral directions. The EJMA-code is well proved for circular bellows. The tests showed that instead any calculation of rectangular bellows has to be confirmed by experiments. The paper summarises the calculation, describes the test activities, the apparatus and reports the final results. (author)

  8. Small biogas plant with integrated gas and stirrer bellows. Kleinbiogasanlage mit integriertem Gas- und Ruehrbalg

    Energy Technology Data Exchange (ETDEWEB)

    Anon,

    1985-09-12

    The content of a flexible rectangular septic tank is stirred under the pressure produced by the gas generated by the rotting mass by means of integrated gas and stirring bellows. Their volume is indirectly connected via a gas pipe with the volume of the container, so that the gas formed in the septic tank can reach the bellows via this pipe and can expand this, which causes mixing and at the same time the rotting liquid exerts a pressure on the gas in the bellows. In this way, one can provide gas constantly under pressure. The formation of sinking and floating layers is prevented.

  9. Gas expulsion in highly substructured embedded star clusters

    Science.gov (United States)

    Farias, J. P.; Fellhauer, M.; Smith, R.; Domínguez, R.; Dabringhausen, J.

    2018-06-01

    We investigate the response of initially substructured, young, embedded star clusters to instantaneous gas expulsion of their natal gas. We introduce primordial substructure to the stars and the gas by simplistically modelling the star formation process so as to obtain a variety of substructure distributed within our modelled star-forming regions. We show that, by measuring the virial ratio of the stars alone (disregarding the gas completely), we can estimate how much mass a star cluster will retain after gas expulsion to within 10 per cent accuracy, no matter how complex the background structure of the gas is, and we present a simple analytical recipe describing this behaviour. We show that the evolution of the star cluster while still embedded in the natal gas, and the behaviour of the gas before being expelled, is crucial process that affect the time-scale on which the cluster can evolve into a virialized spherical system. Embedded star clusters that have high levels of substructure are subvirial for longer times, enabling them to survive gas expulsion better than a virialized and spherical system. By using a more realistic treatment for the background gas than our previous studies, we find it very difficult to destroy the young clusters with instantaneous gas expulsion. We conclude that gas removal may not be the main culprit for the dissolution of young star clusters.

  10. Stellar Wind Retention and Expulsion in Massive Star Clusters

    Science.gov (United States)

    Naiman, J. P.; Ramirez-Ruiz, E.; Lin, D. N. C.

    2018-05-01

    Mass and energy injection throughout the lifetime of a star cluster contributes to the gas reservoir available for subsequent episodes of star formation and the feedback energy budget responsible for ejecting material from the cluster. In addition, mass processed in stellar interiors and ejected as winds has the potential to augment the abundance ratios of currently forming stars, or stars which form at a later time from a retained gas reservoir. Here we present hydrodynamical simulations that explore a wide range of cluster masses, compactnesses, metallicities and stellar population age combinations in order to determine the range of parameter space conducive to stellar wind retention or wind powered gas expulsion in star clusters. We discuss the effects of the stellar wind prescription on retention and expulsion effectiveness, using MESA stellar evolutionary models as a test bed for exploring how the amounts of wind retention/expulsion depend upon the amount of mixing between the winds from stars of different masses and ages. We conclude by summarizing some implications for gas retention and expulsion in a variety of compact (σv ≳ 20 kms-1) star clusters including young massive star clusters (105 ≲ M/M⊙ ≲ 107, age ≲ 500 Myrs), intermediate age clusters (105 ≲ M/M⊙ ≲ 107, age ≈ 1 - 4 Gyrs), and globular clusters (105 ≲ M/M⊙ ≲ 107, age ≳ 10 Gyrs).

  11. Multiple expulsions. Affective and material evictions in Calais

    Directory of Open Access Journals (Sweden)

    Francesca Ansaloni

    2017-06-01

    Full Text Available If we regard expulsions as the abrupt interruption along the territorialisation process of any body in search of refuge, we could see displaced people and migrants as those figures that have to cope with multiple expulsions until they can build a less vulnerable and precarious territory. Drawing on an ethnographic fieldwork in the makeshift camp of Calais known as the Jungle, I outline a relentless movement of expulsion-inclusion, which is both material and affective and operates on different dimensions. In the Jungle of Calais, from March 2015 to October 2016 lived thousands of people coming mainly from Afghanistan, Sudan, Ethiopia, Eritrea, and Pakistan, who created a city-like system together with volunteers from UK and France. Both the French state and the aid groups built their own territories by establishing different kind of relations with the residents of the Jungle, thus contributing to (at least temporarily stabilise or destabilise their search for a territory of their own and engaging in less visible practices of expulsion.

  12. Engineering task plan for the development, fabrication and installation of rotary mode core sample truck bellows

    International Nuclear Information System (INIS)

    BOGER, R.M.

    1999-01-01

    The Rotary Mode Core Sampling Trucks (RMSCTs) currently use a multi-sectioned bellows between the grapple box and the quill rod to compensate for drill head motion and to provide a path for purge gas. The current bellows, which is detailed on drawing H-2-690059, is expensive to procure, has a lengthy procurement cycle, and is prone to failure. Therefore, a task has been identified to design, fabricate, and install a replacement bellows. This Engineering Task Plan (ETP) is the management plan document for accomplishing the identified tasks. Any changes in scope of the ETP shall require formal direction by the Characterization Engineering manager. This document shall also be considered the work planning document for developmental control per Development Control Requirements (HNF 1999a). This Engineering Task Plan (ETP) is the management plan document for accomplishing the design, fabrication, and installation of a replacement bellows assembly for the Rotary Mode Core Sampling Trucks 3 and 4 (RMCST)

  13. Seismic response of elastically restrained single bellows expansion joint in lateral mode

    International Nuclear Information System (INIS)

    Kameswara Rao, C.; Radhakrishna, M.

    2003-01-01

    The present paper attempts to derive an exact solution for the seismic response of U type of single bellows that are considered elastically restrained against rotation to classical fixed-fixed case considered by Morishita et al. (author)

  14. Prediction of dynamics of bellows in exhaust system of vehicle using equivalent beam modeling

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Jin Ho; Kim, Yong Dae; Lee, Nam Young; Lee, Sang Woo [Noise and vibration CAE Team, Hyundai Motor Company, Ulsan (Korea, Republic of)

    2015-11-15

    The exhaust system is one of the major sources of vibrations, along with the suspension system and engine. When the exhaust system is connected directly to the engine, it transfers vibrations to the vehicle body through the body mounts. Therefore, in order to reduce the vibrations transmitted from the exhaust system, the vibration characteristics of the exhaust system should be predicted. Thus, the dynamic characteristics of the bellows, which form a key component of the exhaust system, must be modeled accurately. However, it is difficult to model the bellows because of the complicated geometry. Though the equivalent beam modeling technique has been applied in the design stage, it is not sufficiently accurate in the case of the bellows which have complicated geometries. In this paper, we present an improved technique for modeling the bellows in a vehicle. The accuracy of the modeling method is verified by comparison with the experimental results.

  15. Preliminary design of bellows for the DNB beam source by EJMA and FE linear analysis

    International Nuclear Information System (INIS)

    Trapasiya, Shobhit; Muvvala, Venkata Nagaraju; Rambilas, P.; Gangadharan, Roopesh; Rotti, Chandramouli; Chakraborty, Arun Kumar; Sharma, Dheeraj Kumar

    2015-01-01

    In piping system, U-shaped Bellows are widely used among flexible elements. In general, bellows are typically design for Fatigue behavior according to the EJMA standard based on empirically generated fatigue curves. The present work proposes a methodology in the design of bellows by design by analyses and validates its design by EJMA standard. A linear FE approach is chosen to in line with the EJMA standard. The proposed methodology is benchmarked with the available literatures. The same practice is implemented in the preliminary design of a U-shaped bellows in the water line circuits of DNB beam source. DNB Beam Source is a negative ion source-based neutral beam generator for ITER operates at 100KV. The beam divergence (intrinsic) and magnetic fields from ITER torus causes deflection of beams. This calls for beam optic alignment, which are assured by BS Movement mechanism system. To accomplish the above movement requirements, bellows, which is a stringent of its kind (± 22 mm axial, ± 45 mm lateral within 400mm available space with single ply), is designed between the beam source and possible rigid interface-cooling lines coming from HVB. The paper describes right from conceptual stage to preliminary design. Optimization tools are adopted in the selecting bellow dimensions using MATLAB. At the end a coordinated approach between FE based assessment (in ANSYS) and widely applied code, EJMA is implemented for the validation of design and found FE approach is a very conservative than later in the present case. (author)

  16. Thermal stress analysis and operational characteristics of a bellows-seal globe valve

    International Nuclear Information System (INIS)

    Kim, Kwang Su; Kim, Youn Jae

    2005-01-01

    Because of design and manufacturing costs, it is important to predict an expected life of bellows with component stresses of bellows as its design factors and material characteristics. In this study, numerical analyses are carried out to elucidate the thermal and flow characteristics with 0.1 m (4 inch) bellows-seal globe valve for high temperature (max. 600 .deg. C) and for high pressure (max. 104 kgf/cm 2 , 10.2 MPa) conditions. Using commercial codes, FLUENT, which uses FVM and SIMPLE algorithm, and ANSYS, which uses FEM, the pressure and temperature fields are calculated and the results are graphically depicted. In addition, when bellows have an axial displacement, thermal stress affecting bellows life is studied. The pressure and temperature values obtained from the flow analyses are adopted as the boundary conditions for thermal stress analyses. As the result of this study, we get the reasonable coefficients for valve and thermal stress for bellows, compared with existing coefficients and calculated values

  17. Development of a 3D bellows tracheal graft: mechanical behavior analysis, fabrication and an in vivo feasibility study

    International Nuclear Information System (INIS)

    Park, Jeong Hun; Jung, Jin Woo; Lee, Jung-Seob; Cho, Dong-Woo; Kang, Hyun-Wook; Joo, Young Hoon

    2012-01-01

    Artificial tracheal grafts should have not only enough compressive strength to maintain an open tracheal lumen, but also sufficient flexibility for stable mechanical behavior, similar to the native trachea at the implant site. In this study, we developed a new 3D artificial tracheal graft using a bellows design for considering its mechanical behavior. To investigate the mechanical behavior of the bellows structure, finite element method (FEM) analysis in terms of longitudinal tension/compression, bending and radial compression was conducted. The bellows structure was then compared with the cylinder structure generally used for artificial tracheal grafts. The FEM analysis showed that the bellows had outstanding flexibility in longitudinal tension/compression and bending. Moreover, the bellows kept the lumen open without severe luminal deformation in comparison with the cylinder structure. A three-dimensional artificial tracheal graft with a bellows design was fabricated using indirect solid freeform fabrication technology, and the actual mechanical test was conducted to investigate the actual mechanical behavior of the bellows graft. The fabricated bellows graft was then applied to segmental tracheal reconstruction in a rabbit model to assess its applicability. The bellows graft was completely incorporated into newly regenerated connective tissue and no obstruction at the implanted site was observed for up to 8 weeks after implantation. The data suggested that the developed bellows tracheal graft could be a promising alternative for tracheal reconstruction. (paper)

  18. Early results from an experimental program to determine the behavior of containment piping penetration bellows subjected to severe accident conditions

    International Nuclear Information System (INIS)

    Lambert, L.D.; Parks, M.B.

    1994-01-01

    Containment piping penetration bellows are an integral part of the pressure boundary in steel containments in the United States (US). Their purpose is to minimize loading on the containment shell caused by differential movement between the piping and the containment. This differential movement is typically caused by thermal gradients generated during startup and shutdown of the reactor, but can be caused by earthquake, a loss-of-coolant accident (LOCA), or ''severe'' accidents. In the event of a severe accident, the bellows would be subjected to pressure, temperature, and deflection well beyond the design basis. Most bellows are installed such that they would be subjected to elevated internal pressure, elevated temperature, axial compression, and lateral deflection during a severe accident. A few bellows would be subjected to external pressure and axial elongation, as well as elevated temperature and lateral deflection. The purpose of this experimental program is to examine the potential for leakage of containment bellows during a severe accident. The test series subjects bellows to various levels and combinations of internal pressure, elevated temperature, axial compression or elongation, and lateral deformation. The experiments are being conducted in two parts. For Part 1, all bellows specimens are tested in ''like-new'' condition, without regard for the possible degrading effect of corrosion that has been observed in some containment piping bellows in the US Part I testing, which included 13 bellows tests, has been completed. The second part of the experimental program, in which bellows are subjected to simulated corrosive environments prior to testing, has just just begun. The Part I experiments have shown that bellows in ''like-new'' condition can withstand elevated temperatures and pressures along with large deformations before leaking. In most cases, the like-new bellows were fully compressed without developing any leakage

  19. The Role of Pharmacology in Ureteral Physiology and Expulsive Therapy

    Science.gov (United States)

    Jerde, Travis J.; Nakada, Stephen Y.

    2007-04-01

    Research in the field of ureteral physiology and pharmacology has traditionally been directed toward relaxation of ureteral spasm as a mechanism of analgesia during painful ureteral obstruction, most often stone-induced episodes. However, interest in this field has expanded greatly in recent years with the expanded use of alpha-blocker therapy for inducing stone passage, a usage now termed "medical expulsive therapy". While most clinical reports involving expulsive therapy have focused on alpha receptor or calcium channel blockade, there are diverse studies investigating pharmacological ureteral relaxation with novel agents including cyclooxygenase inhibitors, small molecule beta receptor agonists, neurokinin antagonists, and phosphodiesterase inhibitors. In addition, cutting edge molecular biology research is revealing promising potential therapeutic targets aimed at specific molecular changes that occur during the acute obstruction that accompanies stone disease. The purpose of this report is to review the use of pharmacological agents as ureteral smooth muscle relaxants clinically, and to look into the future of expulsive therapy by reviewing the available literature of ureteral physiology and pharmacology research.

  20. Reactor cooling water expansion joint bellows: The role of the seam weld in fatigue crack development

    International Nuclear Information System (INIS)

    West, S.L.; Nelson, D.Z.; Louthan, M.R. Jr.

    1992-01-01

    The secondary cooling water system pressure boundary of Savannah River Site reactors includes expansion joints utilizing a thin-wall bellows. While successfully used for over thirty years, an occasional replacement has been required because of the development of small, circumferential fatigue cracks in a bellows convolute. One such crack was recently shown to have initiated from a weld heat-affected zone liquation microcrack. The crack, initially open to the outer surface of the rolled and seam welded cylindrical bellows section, was closed when cold forming of the convolutes placed the outer surface in residual compression. However, the bellows was placed in tension when installed, and the tensile stresses reopened the microcrack. This five to eight grain diameter microcrack was extended by ductile fatigue processes. Initial extension was by relatively rapid propagation through the large-grained weld metal, followed by slower extension through the fine-grained base metal. A significant through-wall crack was not developed until the crack extended into the base metal on both sides of the weld. Leakage of cooling water was subsequently detected and the bellows removed and a replacement installed

  1. Beam loss reduction by magnetic shielding using beam pipes and bellows of soft magnetic materials

    Science.gov (United States)

    Kamiya, J.; Ogiwara, N.; Hotchi, H.; Hayashi, N.; Kinsho, M.

    2014-11-01

    One of the main sources of beam loss in high power accelerators is unwanted stray magnetic fields from magnets near the beam line, which can distort the beam orbit. The most effective way to shield such magnetic fields is to perfectly surround the beam region without any gaps with a soft magnetic high permeability material. This leads to the manufacture of vacuum chambers (beam pipes and bellows) with soft magnetic materials. A Ni-Fe alloy (permalloy) was selected for the material of the pipe parts and outer bellows parts, while a ferritic stainless steel was selected for the flanges. An austenitic stainless steel, which is non-magnetic material, was used for the inner bellows for vacuum tightness. To achieve good magnetic shielding and vacuum performances, a heat treatment under high vacuum was applied during the manufacturing process of the vacuum chambers. Using this heat treatment, the ratio of the integrated magnetic flux density along the beam orbit between the inside and outside of the beam pipe and bellows became small enough to suppress beam orbit distortion. The outgassing rate of the materials with this heat treatment was reduced by one order magnitude compared to that without heat treatment. By installing the beam pipes and bellows of soft magnetic materials as part of the Japan Proton Accelerator Research Complex 3 GeV rapid cycling synchrotron beam line, the closed orbit distortion (COD) was reduced by more than 80%. In addition, a 95.5% beam survival ratio was achieved by this COD improvement.

  2. Mechanical strength evaluation of the welded bellows for the ports of the JT-60 vacuum vessel

    International Nuclear Information System (INIS)

    Takatso, H.; Shimizu, M.; Yamamoto, M.

    1983-01-01

    Mechanical strength of the welded bellows for the ports of the JT-60 vacuum vessel was evaluated, laying the emphasis on the fatigue strength under the torsional electromagnetic force. The welded bellows were designed to be loaded with the forced deflection due to the relative displacement between the vacuum vessel and the external fixed point, the atmospheric pressure and the forced torsional angle due to the electromagnetic force. Stresses caused by the former two were estimated following the formulae proposed by the Kellogg Company. On the other hand, two formulae were established to estimate the stress caused by the last, after examining experimentally the behavior of the welded bellows under the torsional load; one is the shearing stress evaluation formula and the other is the axial bending stress evaluation formula. It was found that the welded bellows can easily buckle under the torsional load and the former formula corresponds to the case of non-buckling and the latter to the case of buckling. The present mechanical strength evaluation method was applied to the three kinds of the welded bellows to be used in the ports of the JT-60 vacuum vessel (neutral beam injection ports, vacuum pumping ports and the adjustable limiter ports) and it was confirmed that they have sufficient strength in the range of the design load conditions

  3. CDFR design studies of bellows for operation in a sodium environment

    International Nuclear Information System (INIS)

    Hodgson, D.; Gilroy, J.E.

    1980-01-01

    LMBR operating experience in the UK indicates that bellows correctly designed to meet the operating duty will function satisfactorily over many years, probably longer than the economic life of the reactor. Generally the use of bellows in sodium cooled reactors is to perform one of two basic functions, either to form a high integrity leak tight seal between a static component and one whose function requires a limited movement: or to reduce to an acceptable level the stress due to differential thermal expansion between physically connected components. When bellows units are applied to LMFBRs the design/ validation process is often complicated by the bellows being located in high temperature regions (typically 500 deg C - 550 deg C) where in addition to the more usual duties they have to be capable of withstanding thermal shock and thermal creep strain. This paper considers two examples of the NPC approach to design validation of bellows applied to specific duties that fall within the general categories referred to above

  4. On the elastic flexibility of axially loaded omega and toroidal bellows

    International Nuclear Information System (INIS)

    Findlay, G.E.; Spence, J.

    1979-01-01

    The paper draws together previous theoretical solutions on bellows and derives new results where necessary, to summarise the various theories in a unified picture. In so doing, a number of features can be highlighted which might otherwise escape attention. The strong similarities of solutions based on different equations or different methods of evaluation, emerge automatically for both omega and toroidal bellows under axial loading. Although most previous theoretical investigations on omega and toroidal bellows have involved the application of energy methods, a number of interesting aspects of these solutions have not been highlighted. In particular the solutions lead to bounds on flexibility characteristics on the basis of small displacement linear elastic theory. A companion paper extends the analyses to cater for creep behaviour. (Auth.)

  5. Optimum design of the metal bellows on the SolidWorks platform

    Directory of Open Access Journals (Sweden)

    Mikhail V. Chugunov

    2017-06-01

    Full Text Available Introduction: The metal bellows are widely used in various technical systems as the sensitive, compensating and separating elements. A variety of possible constructive solutions using bellows causes a broad range of standard sizes specified in GOST. In this regard the problem of the metal bellows design, which in the present case resolves itself to the choice of the bellow corresponding to the set specifications optimum, is important. Thus, the purpose of the research is the development of technique and software for the optimum design automation of the considered class structures. Materials and Methods: SolidWorks is the world leader in the area of CAD/CAE computer aided design-engineering system and possesses not only a developed standard functionality, but also opportunities of extension of this functionality by the user. In this article SolidWorks is used as a platform for the development of Add-In application to create automatically the metal bellow 3D model for the given parameters from the database corresponding to the given specifications. At the same time access to SolidWorks simulation functionality, through the analysis of SolidWorks Simulation, and to the appropriate database is provided by COM technology. For the solution of the optimization problem, the functionality of the Add-In-application developed by authors of this article is used. A development environment is MS Visual Studio C ++ (2015. The basis for work is object-oriented programming with API SolidWorks use. Results: The technique of optimum design of the metal bellows is developed. The software represents the SolidWorks application for practical use creating the project solution in the form of 3D models (parts and assemblies corresponding to the given specifications. Discussion and Conclusions: The developed technique and software reduce considerably time for the development of the project for structures of the considered class.

  6. Stress analysis of neutral beam pivot point bellows for tokamak fusion test reactor

    International Nuclear Information System (INIS)

    Johnson, J.J.; Benda, B.J.; Tiong, L.W.

    1983-01-01

    The neutral beam pivot point bellows serves as an airtight flexible linkage between the torus duct and the neutral beam transition duct in Princeton University's Tokamak Fusion Test Reactor. The bellows considered here is basically rectangular in cross section with rounded corners; a unique shape. Its overall external dimensions are about 28 in. (about 711 mm) X about 35 in. (about 889 mm). The bellows is formed from 18 convolutions and is of the nested ripple type. It is about 11 in. (about 43.3 mm) in length, composed of Inconel 718, and each leaf has a thickness of 0.034 in. (.86 mm). The bellows is subjected to a series of design loading conditions -- vacuum, vacuum + 2 psi (.12 MPa), vacuum + stroke (10,000 cycles), vacuum + temperature increase + extension, extension to a stress of 120 ksi (838 MPa), and a series of rotational loading conditions induced in the bellows by alignment of the neutral beam injector. A stress analysis of the bellows was performed by the finite element method -- locations and magnitude of maximum stresses were calculated for all of the design loading conditions to check with allowable values and help guide placement of strain gauges during proof testing. A typical center convolution and end convolution were analyzed. Loading conditions were separated into symmetric and antisymmetric cases about the planes of symmetry of the cross-section. Iterative linear analyses were performed, i.e. compressive loading conditions led to predicted overlap of the leaves from linear analysis and restraints were added to prevent such overlap. This effect was found to be substantial in stress predicition and necessary to be taken into account. A total of eleven loading conditions and seven models were analyzed. The results showed peak stresses to be within allowable limits and the number of allowable cycles to be greater than the design condition

  7. Expulsion of swimming bacteria by a circular flow

    Science.gov (United States)

    Sokolov, Andrey; Aronson, Igor

    Macroscopic shear flow alters swimming trajectories in a highly nontrivial way and results in dramatic reduction of viscosity and heterogeneous bacterial distributions. We report on experimental and theoretical studies of rapid expulsion of microswimmers, such as motile bacteria, by a circular flow created by a rotating microparticle. We observed a formation of a macroscopic depletion area in a high-shear region, in the vicinity of a microparticle. The rapid migration of bacteria from the shear-rich area is caused by a circular structure of the flow rather than intrinsic random fluctuations of bacteria orientations, in stark contrast to planar shear flow. Our mathematical model revealed that expulsion is a combined effect of motility and alignment by a vortical flow. Our findings offer a novel approach for manipulation of motile microorganisms and shed new light on bacteria-flow interactions. Was supported by the US DOE, Office of Basic Energy Sciences, Division of Materials Science And Engineering, under Contract No. DE AC02-06CH11357.

  8. Non-Invasive Airway Cleansing with Application of Expulsion Effect of HFJV (High Frequency Jet Ventilation

    Directory of Open Access Journals (Sweden)

    A. Hermely

    2010-01-01

    Full Text Available The aim of this study was to demonstrate the effectiveness of the use of expulsion and impulsion nozzle high frequency ventilation (VFDV for cleansing respiratory system during long-term mechanical ventilation. Material and methods. Retrospective study. In the group of 198 patients presenting its own procedures and the application of inpulsive and expulsive effect of the nozzle frequency ventilation (VFDV for cleansing and maintaining a patent airway. They used high frequency jet ventilation with the possibility of expulsion and epulsion programming and assessed a total of over 8000 expulsion procedures. Changes in lung mechanics, hemodynamics, effectiveness of expulsion and the need for suction beforeexpulsion and in regular application of VFDV were monitored. Results. We statistically compared and evaluated the effectiveness of expulsion in the VFDV group of 198 patients on long-term UVP, which was effective in average of 94.9% of patients. The impact of expulsion regime on circulatory, ventilation systems and gas exchange in the lungs, including lung mechanics, were analyzed. The authors found that the application of VFDV had a substantial and statistically significant effect on hemodynamics. Application of expulsion and lavage (a technique is described statistically significantly reduced airway resistance Raw (p<0.01 and improved the levels of lung static compliance (p<0.01 compared with the prior expulsion. Changes in blood gases during the expulsion itself did not have a major impact on gas exchange in the lungs or on the pH in this group, but there was a statistically significant increase in PaO2 (p<0.05. A key finding was that when comparing the number of manipulations in the airways (suction, a radical reduction in the number of pumping was observed, if expulsion was used regularly. A statistically significant difference in the application of expulsion was detected when compared to most groups of patients (p<0.01. The number of

  9. One State's Systems Change Efforts to Reduce Child Care Expulsion: Taking the Pyramid Model to Scale

    Science.gov (United States)

    Vinh, Megan; Strain, Phil; Davidon, Sarah; Smith, Barbara J.

    2016-01-01

    This article describes the efforts funded by the state of Colorado to address unacceptably high rates of expulsion from child care. Based on the results of a 2006 survey, the state of Colorado launched two complementary policy initiatives in 2009 to impact expulsion rates and to improve the use of evidence-based practices related to challenging…

  10. Vulnerability and the Right to Respect for Private Life as an Autonomous Source of Protection against Expulsion under Article 8 ECHR

    Directory of Open Access Journals (Sweden)

    Sylvie Da Lomba

    2017-12-01

    Full Text Available This paper focuses on settled migrants and calls for the construction of the right to respect for private life as an autonomous source of protection against expulsion under Article 8 ECHR. I contend that, as a core part of human existence, private life warrants meaningful protection. I posit that the fact that all settled migrants have established private life in the host State brings it to the fore of Article 8 expulsion cases. This argument finds strong support in the concept of belonging and transnational migration theory; both tell us that settled migrants’ host State has become their ‘own country’. Drawing on earlier work, I reclaim vulnerability as a foundation and tool of International Human Rights Law with a view to recognising migrants within the jurisdiction of ECHR States as fully-fledged ECHR subjects and making the European Court of Human Rights responsive to their vulnerability. I make the case for absolute protection against expulsion for second (and subsequent-generation migrants and settled migrants who have spent most of their adult life in the host State. In respect of other settled migrants, I argue that the minimum protection standard should be that expulsion is only justifiable in exceptional circumstances.

  11. Summary report of project SIREN (Search, Intercept, Retrieve, Expulsion, Nuclear)

    International Nuclear Information System (INIS)

    Buden, D.

    1992-12-01

    Project SIREN (Search, Intercept, Retrieve, Expulsion, Nuclear) has evaluated the technologies and operational strategies needed to rendezvous with and capture aerospace radioactive materials (e.g., a distressed or spent space reactor core) before such materials can reenter the terrestrial atmosphere and to move these captured materials to a space destination for proper disposal. The use of systems external to a satellite allows multiple attempts to prevent the nuclear materials from reentering the atmosphere. SIREN also has investigated means to prevent the breakup of nuclear-powered systems already in space. The SIREN project has determined that external means can be used reliably to prevent nuclear materials from reentering the terrestrial environment, prepared a computer model that can be used to evaluate the means to dispose of radioactive materials, assessed the hazards from existing nuclear power systems in space, and in discussions with Russian Federation representatives determined interest in joint activities in this area

  12. A method and machine for forming pleated and bellow tubes

    International Nuclear Information System (INIS)

    Banks, J.W.

    1975-01-01

    In a machine, the rollers outside the rough tube are rigidly supported for assuring the accurate forming of each turn of the pleated tube, the latter being position-indexed independently of the already formed turns. An inner roller is supported by a device for adjusting and indexing the position thereof on a carriage. The thus obtained tubes are suitable, in particular, for forming expansion sealing joints for power generators or nuclear reactors [fr

  13. A zero-length bellows for the PEP-II High-Energy Ring

    International Nuclear Information System (INIS)

    Nordby, M.; Daly, E.F.; Kurita, N.; Langton, J.

    1995-08-01

    Due to the beamline space constrictions and the modular design of the vacuum system, a conventional bellows can not be used everywhere in the PEP-II High-Energy Ring (HER) arcs. A zero-length ''Flex Flange'' was developed which actually performs better than a more standard bellows. The Flex Flange fits the space available while still preserving the modularity of the system. Furthermore, the design provides for an accurate match-up between adjoining octagonal copper chambers despite the large fabrication and assembly tolerances and high operational loads. Beam chamber continuity is ensured by an integral RF seal ring which is easy to install and fault-tolerant. Heating from synchrotron radiation and higher-order mode trapping is managed to ensure a robust connection despite the 3,000 mA beam current of the PEP-II HER. The Flex Flange concept is versatile and adaptable to many applications, yet economical both in space needed and cost

  14. Vacuum Bellows, Vacuum Piping, Cryogenic Break, and Copper Joint Failure Rate Estimates for ITER Design Use

    Energy Technology Data Exchange (ETDEWEB)

    L. C. Cadwallader

    2010-06-01

    The ITER international project design teams are working to produce an engineering design in preparation for construction of the International Thermonuclear Experimental Reactor (ITER) tokamak. During the course of this work, questions have arisen in regard to safety barriers and equipment reliability as important facets of system design. The vacuum system designers have asked several questions about the reliability of vacuum bellows and vacuum piping. The vessel design team has asked about the reliability of electrical breaks and copper-copper joints used in cryogenic piping. Research into operating experiences of similar equipment has been performed to determine representative failure rates for these components. The following chapters give the research results and the findings for vacuum system bellows, power plant stainless steel piping (amended to represent vacuum system piping), cryogenic system electrical insulating breaks, and copper joints.

  15. Compatibility study of 316L stainless steel bellows for XMC3690 reserve lithium/thionyl-chloride battery

    Energy Technology Data Exchange (ETDEWEB)

    Cieslak, W.R.; Delnick, F.M.; Crafts, C.C.

    1986-02-01

    Maintenance of the integrity of a battery's active electrochemical components throughout shelf life is essential to achieving acceptable performance characteristics. The electrolyte in the XMC3690 reserve lithium/thionyl-chloride (RLTC) battery is stored in a 316L stainless steel welded-bellows assembly. Corrosion of the bellows that might compromise battery performance must be avoided. Postmortem examination of welded bellows following electrolyte storage for 2 years, including up to 1 year at 70/sup 0/C, revealed no significant corrosion or any sign of stress-corrosion cracking. Transition metal ion concentrations in the electrolyte were very low and did not change with aging conditions. Based on these observations, we do not expect corrosion of the bellows assembly to limit shelf life of the XMC3690 RLTC battery.

  16. Ecotoxicological Assessment of Water and Sediment Pollution of the Iskar River bellow Samokov

    Directory of Open Access Journals (Sweden)

    Ivan Diadovski

    2005-04-01

    Full Text Available A system of integral ecological indices has been worked out to assess the level of pollution of water and sediments with hazardous substances. A model for the dynamics of the integral index for water and sediments pollution is proposed. This index was applied for ecotoxicological assessment of water and sediments pollution of the Iskar river bellow Samokov. A modification method on time series analysis is applied.

  17. Design and Development of a Pressure Transmitter Using Modified Inductance Measuring Network and Bellow Sensor

    OpenAIRE

    Venkata Lakshmi Narayana K.; Bhujanga Rao A.

    2013-01-01

    In this paper, a pressure transmitter using a modified op-amp based network for inductance measurement using a bellow as sensor has been proposed to measure the pressure and to convert pressure changes in to an electrical current which can be transmitted to a remote indicator. The change in inductance due to change in pressure is measured by an improved modified operational amplifier based network. The proposed network permits offset inductance compensation of sensing coil and also minimizes ...

  18. Study and Development of Face-Contact, Bellows Mechanical Seal for Liquid Hydrogen Turbopump

    OpenAIRE

    NOSAKA, Masataka; SUZUKI, Mineo; MIYAKAWA, Yukio; KAMIJO, Kenjiro; KIKUCHI, Masataka; MORI, Masahiro; 野坂, 正隆; 鈴木, 峰男; 宮川, 行雄; 上絛, 謙二郎; 菊池, 正孝; 森, 雅裕

    1981-01-01

    The development of a 10-ton thrust liquid oxygen and liquid hydrogen (LOX and LH2) rocket engine is under way at the National Space Development Agency. In advance of the development of a liquid hydrogen turbopump, the National Aerospace Laboratory carried out study and development of a face-contact, bellows mechanical seal for a liquid hydrogen turbopump in co-operation with the National Space Development Agency. The present report describes the fundamental experiments of the mechanical seal ...

  19. The manufacture and properties of a glass fabric/epoxy composite bellows

    International Nuclear Information System (INIS)

    Evans, D.; Langridge, J.U.D.; Morgan, J.T.

    1978-01-01

    This bellows is a small but critical part of a large bubble chamber at present being constructed. It forms a gas tight seal between the reciprocating piston and the stationary chamber walls separating the chamber liquid from the piston backing gas. It is tubular (800 mm diameter) containing only one convolution and operates at a temperature of 26K in a 3 tesla magnetic field. For this latter reason, a polymeric material is preferred since this avoids eddy current heating effects. During normal operation of the bubble chamber the bellows is required to accommodate the total stroke of the piston (+-3.5 mm) and to withstand a pressure swing of +-3 bar at a frequency of 30 Hz. Detailed consideration of these operating parameters confirms the need for high quality glass reinforced plastics material. This paper describes the moulding technique, first developed for a 300 mm diameter bellows successfully used in a similar application. It produces a composite of the complex shape required, to close dimensional tolerances and with a glass fabric content in excess of 60% by weight. (author)

  20. Corrosion Test Results for Inconel 600 vs Inconel-Stainless UG Bellows

    International Nuclear Information System (INIS)

    Osborne, P.E.

    2002-01-01

    The Conversion Project (CP) of the Molten Salt Reactor Experiment at Oak Ridge National Laboratory (ORNL) involves converting slightly less than 40 kg of 233 U to a stable form for safe storage. The operation is performed within a few vessels interconnected by valves and 1/2-in. metal tubing. During this conversion, a particularly toxic and corrosive by-product is formed, namely aqueous hydrofluoric acid (HF). The production of HF is a result of the hydrolysis of UF 6 and subsequent steam treatments of UO 2 F 2 . For each mole of UF 6 converted, 6 mol of HF are produced. The HF that forms during conversion combines with water to produce approximately 1.5 L of 33 wt % HF. As this mixture is transferred within the process system, the tubing and valves are exposed to high concentrations of HF in liquid and vapor form. Of particular concern in the system are the almost 30 valves that have the potential for exposure to HF. For these valves, a vendor-supplied UG valve was installed. UG valves consist of an Alloy 400 (Monel) body and stem tip and Alloy 600 (Inconel) bellows. These valves have been used under experimental conditions that simulate the CP. It has been established that they have a finite life when exposed to a HF and air environment. Most failures were seen around the flange at the bottom of the bellows, and it was suspected that this flange and the weld material were not Inconel. In December 2001, the vendor confirmed that this flange was not Inconel but instead was stainless steel 316. After discussions between the vendor and ORNL staff involved with the CP effort, it was decided that the entire wetted area of the bellows would be fabricated from Alloy 600. In March 2002, four newly fabricated bellows assemblies were received from the vendor for the purposes of corrosion testing in HF. This report presents results from the corrosion tests conducted to determine if the new design of the bellows would enhance their corrosion resistance

  1. Corrosion Test Results for Inconel 600 vs Inconel-Stainless UG Bellows

    Energy Technology Data Exchange (ETDEWEB)

    Osborne, P.E.

    2002-09-11

    The Conversion Project (CP) of the Molten Salt Reactor Experiment at Oak Ridge National Laboratory (ORNL) involves converting slightly less than 40 kg of {sup 233}U to a stable form for safe storage. The operation is performed within a few vessels interconnected by valves and 1/2-in. metal tubing. During this conversion, a particularly toxic and corrosive by-product is formed, namely aqueous hydrofluoric acid (HF). The production of HF is a result of the hydrolysis of UF{sub 6} and subsequent steam treatments of UO{sub 2}F{sub 2}. For each mole of UF{sub 6} converted, 6 mol of HF are produced. The HF that forms during conversion combines with water to produce approximately 1.5 L of 33 wt % HF. As this mixture is transferred within the process system, the tubing and valves are exposed to high concentrations of HF in liquid and vapor form. Of particular concern in the system are the almost 30 valves that have the potential for exposure to HF. For these valves, a vendor-supplied UG valve was installed. UG valves consist of an Alloy 400 (Monel) body and stem tip and Alloy 600 (Inconel) bellows. These valves have been used under experimental conditions that simulate the CP. It has been established that they have a finite life when exposed to a HF and air environment. Most failures were seen around the flange at the bottom of the bellows, and it was suspected that this flange and the weld material were not Inconel. In December 2001, the vendor confirmed that this flange was not Inconel but instead was stainless steel 316. After discussions between the vendor and ORNL staff involved with the CP effort, it was decided that the entire wetted area of the bellows would be fabricated from Alloy 600. In March 2002, four newly fabricated bellows assemblies were received from the vendor for the purposes of corrosion testing in HF. This report presents results from the corrosion tests conducted to determine if the new design of the bellows would enhance their corrosion resistance.

  2. Can tamsulosin facilitate expulsion of ureteral stones? A meta-analysis of randomized controlled trials.

    Science.gov (United States)

    Fan, Bo; Yang, Deyong; Wang, Jianbo; Che, Xiangyu; Li, Xiancheng; Wang, Lina; Chen, Feng; Wang, Tiezheng; Song, Xishuang

    2013-08-01

    To determine the efficacy and safety of the adrenergic alpha-antagonist tamsulosin in facilitating ureteral stones expulsion. A literature search was carried out using the PubMed database, Medline via Ovid, Embase and the Cochrane Library database to identify randomized controlled trials evaluating the efficiency of tamsulosin in the treatment of ureteral stones. Meta-analysis and forest plots were carried out by use of Review Manager version 5.1 software (Cochrane Collaboration). Compared with the control group, the tamsulosin group had an increase in expulsion rate of 51% and a decrease in expulsion time of 2.63 days. Furthermore, tamsulosin was found to reduce the risk of ureteral colic during treatment by 40% and also the risk of requirement of auxiliary procedures during follow up by 60%. In terms of safety, the tamsulosin group had a 117% increase in the incidence of side-effects compared with the control group, especially for incidence of dizziness. Tamsulosin facilitates the expulsion of ureteral calculi by providing a higher expulsion rate, a shorter expulsion time, a lower incidence of ureteral colic during treatment and a lower requirement of auxiliary procedures. However, the incidence of dizziness occurring during tamsulosin treatment is significantly higher in this setting. © 2012 The Japanese Urological Association.

  3. Theoretical and experimental studies on bellows type expansion joints behaviour of Chinon 3 primary coolant system

    International Nuclear Information System (INIS)

    Vrillon, B.; Jeanpierre, F.; Copin, A.; Gregoire, J.P.

    1975-01-01

    The vibration study of the bellows was performed in two stages. A series of vibration tests was performed on a real bellow joint. By comparing the experimental results with calculations using the finite elements method for revolution shells it was possible to qualify the representation of the waves and reinforcement rings. The resonant frequencies and modes were calculated for the various joints under reactor conditions. According to the excitation sources considered, the amplitude of the displacements and stresses can be determined from these characteristic modes. The corrugations are protected internally from the aerodynamic effects of the gas flow by an inner sleeve welded to the primary piping upstream and free downstream. The annular space between this sleeve and the corrugations forms a resonant volume liable to be excited by flow-induced pressure fluctuations. It was possible to calculate the characteristic resonance frequencies and modes of this gas column (air at normal temperature and pressure). A full-scale mock-up test under conditions corresponding to the calculation hypotheses gave experimental proof of the calculation results. Owing to the good correlation between the results of these two studies an attempt was made to calculate the acoustical behaviour of these cavities for nominal running conditions (temperature and pressure) as a function of the known excitation sources. The results obtained from all these tests show that the use of bellows type expansion joints on a primary reactor circuit offers the same guarantees of reliability and resistance as any other circuit component under pressure, as long as the strains they undergo remain within the limits specified by the regulations and nuclear codifications

  4. Estimating the active space of male koala bellows: propagation of cues to size and identity in a Eucalyptus forest.

    Directory of Open Access Journals (Sweden)

    Benjamin D Charlton

    Full Text Available Examining how increasing distance affects the information content of vocal signals is fundamental for determining the active space of a given species' vocal communication system. In the current study we played back male koala bellows in a Eucalyptus forest to determine the extent that individual classification of male koala bellows becomes less accurate over distance, and also to quantify how individually distinctive acoustic features of bellows and size-related information degrade over distance. Our results show that the formant frequencies of bellows derived from Linear Predictive Coding can be used to classify calls to male koalas over distances of 1-50 m. Further analysis revealed that the upper formant frequencies and formant frequency spacing were the most stable acoustic features of male bellows as they propagated through the Eucalyptus canopy. Taken together these findings suggest that koalas could recognise known individuals at distances of up to 50 m and indicate that they should attend to variation in the upper formant frequencies and formant frequency spacing when assessing the identity of callers. Furthermore, since the formant frequency spacing is also a cue to male body size in this species and its variation over distance remained very low compared to documented inter-individual variation, we suggest that male koalas would still be reliably classified as small, medium or large by receivers at distances of up to 150 m.

  5. Estimating the Active Space of Male Koala Bellows: Propagation of Cues to Size and Identity in a Eucalyptus Forest

    Science.gov (United States)

    Charlton, Benjamin D.; Reby, David; Ellis, William A. H.; Brumm, Jacqui; Fitch, W. Tecumseh

    2012-01-01

    Examining how increasing distance affects the information content of vocal signals is fundamental for determining the active space of a given species’ vocal communication system. In the current study we played back male koala bellows in a Eucalyptus forest to determine the extent that individual classification of male koala bellows becomes less accurate over distance, and also to quantify how individually distinctive acoustic features of bellows and size-related information degrade over distance. Our results show that the formant frequencies of bellows derived from Linear Predictive Coding can be used to classify calls to male koalas over distances of 1–50 m. Further analysis revealed that the upper formant frequencies and formant frequency spacing were the most stable acoustic features of male bellows as they propagated through the Eucalyptus canopy. Taken together these findings suggest that koalas could recognise known individuals at distances of up to 50 m and indicate that they should attend to variation in the upper formant frequencies and formant frequency spacing when assessing the identity of callers. Furthermore, since the formant frequency spacing is also a cue to male body size in this species and its variation over distance remained very low compared to documented inter-individual variation, we suggest that male koalas would still be reliably classified as small, medium or large by receivers at distances of up to 150 m. PMID:23028996

  6. Stress analysis and torsional buckling analysis of U-shaped bellows

    International Nuclear Information System (INIS)

    Watanabe, Osamu; Ohtsubo, Hideomi.

    1986-01-01

    This paper presents analysis of elastic stress and torsional buckling of U-shaped bellows using ring elements. The expansion joint is considered to be composed of the two toroidal sections and inner-connecting annular plates. The general thin shell theory is employed to derive strain-displacement relations of shells and plates, valid for any loadings. Numerical examples under internal pressure or axial loading are described and compared with the results of existing appropriate analysis. The fundamental aspects of torsional buckling, which have not been studied previously, will also be investigated. (author)

  7. Construction and testing of a double acting bellows liquid helium pump

    International Nuclear Information System (INIS)

    Burns, W.A.; Green, M.A.; Ross, R.R.; Van Slyke, H.

    1980-05-01

    The double acting reciprocating bellows liquid helium pump built and tested at the Lawrence Berkeley Laboratory is described. The pump is capable of delivering 50 gs -1 of liquid helium to supply the two-phase cooling sytem for a large superconducting magnet. The pump is driven by a torque motor at room temperature; the reciprocating motion is transmitted to the pump through a shaft which operates between room temperature and 4 0 K. The design details of this liquid helium pump are presented. The helium pump has operated in a helium bath and in pumped forced flow helium circuits. The results of these experimental tests are presented in this report

  8. A pneumatic bellows-driven setup for controlled-distance electrochemical impedance measurements of Zircaloy-2 in simulated BWR conditions

    International Nuclear Information System (INIS)

    Arilahti, E.; Bojinov, M.; Hansson-Lyyra, L.

    2004-01-01

    This paper describes a novel pneumatic bellows-driven arrangement designed for controlled distance electrochemistry (CDE) measurements. The feasibility of the new arrangement has been verified by performing contact electric impedance measurements to study corrosion of Zircaloy-2 in a re-circulation loop simulating the BWR conditions. Until now, the measurements have been carried out using a step-motor driven controlled-distance electrochemistry (CDE) arrangement. The electrical and electrochemical properties of the pre transition oxide on Zircaloy-2 determined from these measurements were in good agreement with those estimated from measurements with a step-motor driven CDE. Furthermore, the results indicate that the bellows-driven CDE device is less sensitive to the contact pressure variation than the step-motor driven arrangement. This property combined with the bellows driven displacement mechanism provides a clear advantage for future in-core corrosion studies of fuel cladding materials. (Author)

  9. Tentative design-philosophy for bellows in sodium cooled fast breeder reactors pipings

    Energy Technology Data Exchange (ETDEWEB)

    Scaller, K; Vrillon, B

    1980-02-01

    Expansion joints have proved to be reliable components, when properly designed and realized, in normal industrial equipment. But nevertheless bellows have not been employed widely in nuclear reactors and almost not in sodium cooled fast breeder reactors, where use of expansion-joints could considerably shorten the length of pipelines and, in consequence, lower the cost of the power plant. In the framework of its research and development program on fast reactors the French Atomic Energy.Commission, in cooperation with the industry, develops guidelines, backed up by experiments, to allow a safe design of pipe-lines and compensating-devices. The main points of these guidelines are discussed in this paper with the understanding, that they are tentative rules subject to changes. The guidelines are a complement to existing rules, like ASME - Code III, Code Case 1481, standards of the EJMA Preliminary Draft for Code Case Class I, Expansion Joints in Piping systems and suppliers' rules for the special case of application to sodium cooled fast breeder reactors. Relatively small diameters and easily accessible expansion joints, on control rods and valves for example, are not concerned. These guidelines do not apply to the bellows which are used as an integral part of a component.

  10. Tentative design-philosophy for bellows in sodium cooled fast breeder reactors pipings

    International Nuclear Information System (INIS)

    Scaller, K.; Vrillon, B.

    1980-01-01

    Expansion joints have proved to be reliable components, when properly designed and realized, in normal industrial equipment. But nevertheless bellows have not been employed widely in nuclear reactors and almost not in sodium cooled fast breeder reactors, where use of expansion-joints could considerably shorten the length of pipelines and, in consequence, lower the cost of the power plant. In the framework of its research and development program on fast reactors the French Atomic Energy.Commission, in cooperation with the industry, develops guidelines, backed up by experiments, to allow a safe design of pipe-lines and compensating-devices. The main points of these guidelines are discussed in this paper with the understanding, that they are tentative rules subject to changes. The guidelines are a complement to existing rules, like ASME - Code III, Code Case 1481, standards of the EJMA Preliminary Draft for Code Case Class I, Expansion Joints in Piping systems and suppliers' rules for the special case of application to sodium cooled fast breeder reactors. Relatively small diameters and easily accessible expansion joints, on control rods and valves for example, are not concerned. These guidelines do not apply to the bellows which are used as an integral part of a component

  11. Production of Copper-Plated Beamline Bellows and Spools for LCLS-II

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, Katherine M. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Carpenter, Brian C. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Daly, Ed [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Huque, Naeem A. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Peshehonoff, Ted [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Arkan, Tug [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Lunin, A. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Premo, K. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)

    2017-05-01

    The SLAC National Accelerator Laboratory is currently constructing a major upgrade to its accelerator, the Linac Coherent Light Source II (LCLS-II). Several Department of Energy national laboratories, including the Thomas Jefferson National Accelerator Facility (JLab) and Fermi National Accelerator Laboratory (FNAL), are participating in this project. The 1.3-GHz cryomodules for this project consist of eight cavities separated by bellows (expansion joints) and spools (tube sections), which are copper plated for RF conduction. JLab is responsible for procurement of these bellows and spools, which are delivered to JLab and FNAL for assembly into cryomodules. Achieving accelerator-grade copper plating is always a challenge and requires careful specification of requirements and application of quality control processes. Due to the demanding technical requirements of this part, JLab implemented procurement strategies to make the process more efficient as well as provide process redundancy. This paper discusses the manufacturing challenges that were encountered and resolved, as well as the strategies that were employed to minimize the impact of any technical issues.

  12. Symbiosis regulation in a facultatively symbiotic temperate coral: zooxanthellae division and expulsion

    Science.gov (United States)

    Dimond, J.; Carrington, E.

    2008-09-01

    Zooxanthellae mitotic index (MI) and expulsion rates were measured in the facultatively symbiotic scleractinian Astrangia poculata during winter and summer off the southern New England coast, USA. While MI was significantly higher in summer than in winter, mean expulsion rates were comparable between seasons. Corals therefore appear to allow increases in symbiont density when symbiosis is advantageous during the warm season, followed by a net reduction during the cold season when zooxanthellae may draw resources from the coral. Given previous reports that photosynthesis in A. poculata symbionts does not occur below approximately 6°C, considerable zooxanthellae division at 3°C and in darkness suggests that zooxanthellae are heterotrophic at low seasonal temperatures. Finally, examination of expulsion as a function of zooxanthellae density revealed that corals with very low zooxanthellae densities export a significantly greater proportion of their symbionts, apparently allowing them to persist in a stable azooxanthellate state.

  13. Proposal for the award of two contracts for the supply of bellows expansion joints for LHC cryomagnet interconnections

    CERN Document Server

    2000-01-01

    This document concerns the award of two contracts for the supply of bellows expansion joints for LHC cryomagnet interconnections. Following a market survey carried out among 39 firms in eight Member States, a call for tenders (IT-2630/LHC/LHC) was sent on 31 May 2000 to 14 firms in five Member States. By the closing date, CERN had received tenders from five firms in four Member States. The Finance Committee is invited to agree to the negotiation of: - a contract with HANS SKODOCK (DE), the lowest bidder, for the supply of two packages of bellows expansion joints, namely the U-type package and the nested bellows package for a total amount of 2 796 785 euros (4 353 650 Swiss francs), not subject to revision, with options for 20% extra bellows expansion joints for an additional amount of 559 357 euros (870 730 Swiss francs), not subject to revision, bringing the total amount to 3 356 142 euros (5 224 380 Swiss francs), not subject to revision. The rates of exchange which have been used are those stipulated in th...

  14. Cues to body size in the formant spacing of male koala (Phascolarctos cinereus) bellows: honesty in an exaggerated trait.

    Science.gov (United States)

    Charlton, Benjamin D; Ellis, William A H; McKinnon, Allan J; Cowin, Gary J; Brumm, Jacqui; Nilsson, Karen; Fitch, W Tecumseh

    2011-10-15

    Determining the information content of vocal signals and understanding morphological modifications of vocal anatomy are key steps towards revealing the selection pressures acting on a given species' vocal communication system. Here, we used a combination of acoustic and anatomical data to investigate whether male koala bellows provide reliable information on the caller's body size, and to confirm whether male koalas have a permanently descended larynx. Our results indicate that the spectral prominences of male koala bellows are formants (vocal tract resonances), and show that larger males have lower formant spacing. In contrast, no relationship between body size and the fundamental frequency was found. Anatomical investigations revealed that male koalas have a permanently descended larynx: the first example of this in a marsupial. Furthermore, we found a deeply anchored sternothyroid muscle that could allow male koalas to retract their larynx into the thorax. While this would explain the low formant spacing of the exhalation and initial inhalation phases of male bellows, further research will be required to reveal the anatomical basis for the formant spacing of the later inhalation phases, which is predictive of vocal tract lengths of around 50 cm (nearly the length of an adult koala's body). Taken together, these findings show that the formant spacing of male koala bellows has the potential to provide receivers with reliable information on the caller's body size, and reveal that vocal adaptations allowing callers to exaggerate (or maximise) the acoustic impression of their size have evolved independently in marsupials and placental mammals.

  15. Service experience and stress corrosion of Inconel 600 bellows expansion joints in turbine steam environments

    International Nuclear Information System (INIS)

    Kramer, L.D.; Michael, S.T.; Pement, F.W.

    The purpose of this paper is to discuss the service history of Inconel 600 expansion bellows, to illustrate a typical case of failure, propose S.C.C. mechanisms, and to rationalize the most probable mechanism. Inconel 600 is fully resistant to high-purity power plant steam (720 deg F maximum) for on-going service lifetimes which greatly exceed the incubation periods which are reported or postulated in the literature for delayed stress corrosion cracking in high-purity water tests (630-660 deg F). The only observed stress corrosion environments which are sufficiently rapidly deleterious to be consistent with failure lifetimes are molten NaOH in superheated steam or a very concentrated aqueous caustic solution containing silica contamination. (author)

  16. Influence of Micro-Damage on Reliability of Cryogenic Bellows in the LHC Interconnections

    CERN Document Server

    Garion, C

    2008-01-01

    To achieve maximum beam energy in the LHC the accumulated length of the interconnections between LHC main magnets has been limited to around 3% of the total magnetic length in the Arcs and Dispersion Suppressors. Such a low ratio leads to a very compact design of components located in the LHC interconnections. This implies development and evolution of high intensity plastic strain fields in the stainless steel expansion bellows subjected to thermo-mechanical loads at low temperatures. These components have been optimised to ensure high reliability standards required for the LHC. Nevertheless, initial damage can occur and lead to a premature fatigue failure. For structures in which plasticity is not confined to the crack tip region, standard failure mechanics, based classically on the stress intensity factor or the strain energy density release rate, can not be used. In the present paper, a constitutive model taking into account plastic strain induced g->a' phase transformation and orthotropic ductile damage i...

  17. Design and Development of a Pressure Transmitter Using Modified Inductance Measuring Network and Bellow Sensor

    Directory of Open Access Journals (Sweden)

    Venkata Lakshmi Narayana K.

    2013-03-01

    Full Text Available In this paper, a pressure transmitter using a modified op-amp based network for inductance measurement using a bellow as sensor has been proposed to measure the pressure and to convert pressure changes in to an electrical current which can be transmitted to a remote indicator. The change in inductance due to change in pressure is measured by an improved modified operational amplifier based network. The proposed network permits offset inductance compensation of sensing coil and also minimizes the stray capacitance between sensing coil and ground using dummy inductor whose value equal to zero level inductance of sensing coil and op-amps with high input impedance. In the first part of experiment, a modified op-amp based inductance measuring circuit has been simulated using LabVIEW (Laboratory Virtual Instrument Engineering Workbench and studied with test inductance, and in the second part, the experimentation was done by replacing the test inductance with a sensing coil fitted to bellow by means of ferromagnetic wire for the measurement of pressure. It has been observed that the variation in gauge pressure from 0 to 70 psi having linear relationship with output ac voltage in the range of 0 to 85.0 mV. Corresponding to pressure variations, the ac output voltage further converted into an electric current of 4 to 20 mA for remote indication and control purpose. The investigations have been performed to sense air pressure of pressure tank fitted with pump piston. The experimental results are found to have good linearity of about ± 0.1 % and resolution.

  18. A comparison of nifedipine and tamsulosin as medical expulsive therapy for the management of lower ureteral stones without ESWL

    Science.gov (United States)

    Cao, Dehong; Yang, Lu; Liu, Liangren; Yuan, Haichao; Qian, Shenqiang; Lv, Xiao; Han, Pin; Wei, Qiang

    2014-01-01

    Administration of nifedipine or tamsulosin has been suggested to augment stone expulsion rates. We aimed to compare the stone expulsion rates and adverse effects associated with the use of nifedipine or tamsulosin as medical expulsive therapy (MET) for the management of lower ureteral stones (LUS) without extracorporeal shock wave lithotripsy (ESWL) via a literature review and meta-analysis. Relevant randomized controlled trials (RCTs) were identified from the Medline, EMBASE, Cochrane CENTRAL, and Google Scholar databases. Finally, a total of 7 RCTs with 3897 patients were included. Our meta-analysis showed that tamsulosin could significantly increase the stone expulsion rate relative to nifedipine in patients with LUS (random-effects model; risk ratio [RR] = 0.81; 95% confidence interval [CI] = 0.75–0.88; P tamsulosin was more effective than nifedipine in patients with LUS, as evidenced by the higher stone expulsion rate. Tamsulosin treatment should therefore be considered for patients with LUS. PMID:24919112

  19. A Study of the Effectiveness of a Saturday School in Reducing Suspension, Expulsion, and Corporal Punishment.

    Science.gov (United States)

    Winborn, John Douglas

    Lack of proper discipline in schools has long been a major concern of the public. Proposals on how to improve discipline have ranged from the bizarre to the cruel. Educators and administrators must devise alternative punishments to replace traditional methods, such as corporal punishment, suspension, and expulsion, that are frequently ineffective.…

  20. Expulsion of the swine whipworm, Trichuris suis 

    DEFF Research Database (Denmark)

    Kringel, Helene

    demonstrating the potential use of its eggs as immunomodulators, treating patients suffering from inflammatory bowel disease and possibly other autoimmune diseases. The immune response induced by T. suis in its host and particularly, the resulting expulsion of worms is the focus of this thesis. Whipworms...

  1. Responses to the 1983 Expulsion of Aliens from Nigeria: A Critique ...

    African Journals Online (AJOL)

    This paper attempts a critique of this plethora of criticisms and submits that the Nigerian government of Shehu Shagari acted in conformity with the Nigerian immigration law of 1963 as informed by the exigencies of national interest. Government should therefore be exonerated from all the said criticisms. Keywords: Expulsion ...

  2. Medical expulsive therapy for ureteral stones: where do we go from here?

    NARCIS (Netherlands)

    Somani, Bhaskar K.; Aboumarzouk, Omar; Traxer, Olivier; Baard, Joyce; Kamphuis, Guido; de la Rosette, Jean

    2016-01-01

    Despite two decades of clinical use, the effectiveness of medical expulsive therapy (MET) for the noninvasive management of patients with ureteral stones has, in the past year, been called into in question. The primary aim of MET is to expedite stone passage, although it has also shown effectiveness

  3. Efficacy and safety of tamsulosin as a medical expulsive therapy for stones in children.

    Science.gov (United States)

    Aldaqadossi, Hussein A; Shaker, Hossam; Saifelnasr, Mohammed; Gaber, Mohammed

    2015-06-01

    To evaluate the efficacy of tamsulosin for promoting ureteric stone expulsion in children, based on the confirmed efficacy of tamsulosin as a medical expulsive therapy in adults. From February 2010 to July 2013, 67 children presenting with a distal ureteric stone of <1 cm as assessed on unenhanced computed tomography were included in the study. The patients were randomised into two groups, with group 1 (33 patients) receiving tamsulosin 0.4 mg and ibuprofen, and group 2 (34) receiving ibuprofen only. They were followed up for 4 weeks. Endoscopic intervention was indicated for patients with uncontrolled pain, recurrent urinary tract infection, hypersensitivity to tamsulosin and failure of stone passage after 4 weeks of conservative treatment. Sixty-three patients completed the study. There were no statistically significant differences between the groups in patient age, body weight and stone size, the mean (SD) of which was 6.52 (1.8) mm in group 1 vs. 6.47 (1.79) mm in group 2 (P = 0.9). The mean (SD) time to stone expulsion in group 1 was 7.7 (1.9) days, vs. 18 (1.73) days in group 2 (P < 0.001). The analgesic requirement (mean number of ketorolac injections) in group 1 was significantly less than in group 2, at 0.55 (0.8) vs. 1.8 (1.6) (P < 0.001). The stone-free rate was 87% in group 1 and 63% in group 2 (P = 0.025). Tamsulosin used as a medical expulsive therapy for children with ureteric stones is safe and effective, as it facilitates spontaneous expulsion of the stone.

  4. Tamsulosin versus tadalafil as a medical expulsive therapy for distal ureteral stones: A prospective randomized study.

    Science.gov (United States)

    Kc, Hari Bahadur; Shrestha, Anil; Acharya, Ganesh Bhakta; Basnet, Robin Bahadur; Shah, Arvind Kumar; Shrestha, Parash Mani

    2016-09-01

    This study aimed to compare the safety and efficacy of tamsulosin and tadalafil as medical expulsive therapy for distal ureteral stones. This prospective randomized study was conducted at the Department of Urology of Bir Hospital over a period of 12 months in patients with distal ureteral stones sized 5 to 10 mm. Patients were randomly divided into 2 groups: group A received tamsulosin 0.4 mg and group B received tadalafil 10 mg at bedtime for 2 weeks. Stone expulsion rate, number of ureteric colic episodes and pain score, analgesic requirements, and adverse drug effects were noted in both groups. Statistical analyses were performed by using Student t-test and chi-square test. Altogether 85 patients, 41 in group A and 44 in group B, were enrolled in the study. The patients' average age was 31.72±12.63 years, and the male-to-female ratio was 1.5:1. Demographic profiles, stone size, and baseline investigations were comparable between the 2 groups. The stone expulsion rate was significantly higher in the tadalafil group than in the tamsulosin group (84.1% vs. 61.0%, p=0.017). Although the occurrence of side effects was higher with tadalafil, this difference was not significant (p=0.099). There were no serious adverse effects. Tadalafil has a significantly higher stone expulsion rate than tamsulosin when used as a medical expulsive therapy for distal ureteral stones sized 5-10 mm. Both drugs are safe, effective, and well tolerated with minor side effects.

  5. Gas expulsion vs gas retention in young stellar clusters II: effects of cooling and mass segregation

    Science.gov (United States)

    Silich, Sergiy; Tenorio-Tagle, Guillermo

    2018-05-01

    Gas expulsion or gas retention is a central issue in most of the models for multiple stellar populations and light element anti-correlations in globular clusters. The success of the residual matter expulsion or its retention within young stellar clusters has also a fundamental importance in order to understand how star formation proceeds in present-day and ancient star-forming galaxies and if proto-globular clusters with multiple stellar populations are formed in the present epoch. It is usually suggested that either the residual gas is rapidly ejected from star-forming clouds by stellar winds and supernova explosions, or that the enrichment of the residual gas and the formation of the second stellar generation occur so rapidly, that the negative stellar feedback is not significant. Here we continue our study of the early development of star clusters in the extreme environments and discuss the restrictions that strong radiative cooling and stellar mass segregation provide on the gas expulsion from dense star-forming clouds. A large range of physical initial conditions in star-forming clouds which include the star-forming cloud mass, compactness, gas metallicity, star formation efficiency and effects of massive stars segregation are discussed. It is shown that in sufficiently massive and compact clusters hot shocked winds around individual massive stars may cool before merging with their neighbors. This dramatically reduces the negative stellar feedback, prevents the development of the global star cluster wind and expulsion of the residual and the processed matter into the ambient interstellar medium. The critical lines which separate the gas expulsion and the gas retention regimes are obtained.

  6. Comparison of silodosin to tamsulosin for medical expulsive treatment of ureteral stones: a systematic review and meta-analysis.

    Science.gov (United States)

    Özsoy, Mehmet; Liatsikos, Evangelos; Scheffbuch, Nicolas; Kallidonis, Panagiotis

    2016-11-01

    This study aimed at comparing the success rates of silodosin to the most commonly used for medical expulsive therapy (MET) tamsulosin for the management of ureteral stones. A systematic review using the search string: "silodosin AND (ston* OR calcu* OR expul*)" was conducted on Pubmed, SCOPUS, Web of Science, Cochrane Central Register. The Primary endpoint was the stone expulsion rate. Secondary endpoint was the time to stone expulsion. Two authors independently screened the studies depending on inclusion and exclusion criteria. Meta-analysis and forest-plot figures were calculated with the software Review Manager (RevMan 5.3.5). Variations were evaluated with the χ 2 statistical method and heterogeneity with I 2 index. After screening of 39 publications obtained by the initial search, three randomized controlled trials were eligible to be included in the meta-analysis. 407 patients were pooled. Favorable results were observed for silodosin in terms of stone expulsion rates with a risk ratio of 1.33 (95 % CI 1.17-1.50) (I 2  = 0 %). Similarly, faster stone expulsion times were observed with silodosin when compared with tamsulosin. Mean difference -2.49 (95 % CI -3.40 to 1.58) (I 2  = 89 %). This meta-analysis showed significantly higher stone expulsion rates and faster expulsion times in favor of silodosin when compared to tamsulosin.

  7. Development of a bellows assembly with RF-shield for KEKB II: abrasion and pumping down tests

    International Nuclear Information System (INIS)

    Suetsugu, Yusuke; Kanazawa, Ken-ichi; Kawahara, Masaharu; Harada, Yosuke; Kaneko, Motosada

    1997-01-01

    A bellows assembly with RF-shield as been designed and developed for the KEK B-factory (KEKB). The RF-shield is a usual finger-type but has special spring-fingers to press contact-fingers (shield-fingers) surely onto inner tube (beam tube). In a chain of design studies an abrasion test of the contact-fingers was performed in vacuum. A quantity of generated metal particles was estimated and expected to have little harm on the beam lifetime if the inner tube is coated with silver. The gas desorption rate and the residual gas components of the bellows assembly were also measured as a final bench test. The gas desorption rate of 1 - 1.5x10 -10 Pa·l/s/cm 2 was obtained after a bake at 150degC for 24 hours. (author)

  8. Rubber bulge forming of single-stage bellows of TiNi shape memory alloy using the displacement control method

    International Nuclear Information System (INIS)

    Senba, Hiromasa; Yamaji, Toru; Okita, Keisuke; Okabe, Nagatoshi; Yamauchi, Kiyoshi; Matsumoto, Kenya

    2005-01-01

    This paper deals with the bulge process for forming the single-stage bellows of TiNi shape memory alloys, which is proposed as a new type of seismic applications, and especially considering the material's special behavior. Thin walled tubes with 20% cold work, whose composition is Ti-51.0 at% Ni, were prepared. First they are appropriately heat-treated and then the rubber bulge process is introduced for the tubes under the condition of austenite phase at room temperature. Displacement control method is adapted to the process. Theoretical prediction of change in outer diameter of the tube on compression is derived, and modified taking into account the progress of the stress-induced martensite transformation on tube's surface by observing the detachment of the oxide layer of the surface. Finally theoretical relationship between compressive displacement and the outer diameter of the tube, which is the most important for the design of the bellows shape, is cleared. (author)

  9. Conductivity, temperature, depth, water quality and pigment data from R/V Bellows cruise BE-1311, 2012-12-12 to 2012-12-14 (NCEI Accession 0159411)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset contains conductivity, temperature, and depth data collected during R/V Bellows cruise BE-1311 of the offshore shelf of the Florida Panhandle Bight at...

  10. Comments on the impedances of the SSC shielded bellows at low frequencies due to the truncation of the wake fields

    International Nuclear Information System (INIS)

    Ng, K.Y.

    1986-09-01

    The behavior of the longitudinal impedance of the SSC shielded bellow at low frequencies depends very much on the length of the wake field used in the Fourier transformation. We show analytically and numerically that, regardless of the difference, single-bunch effects are independent of the actual shape of the impedance when the length of the wake used is bigger than the bunch length

  11. Environmental Assessment for Closure of Cesspools and Implementation of Wastewater Management and Treatment Measures at Bellows Air Force Station, Hawaii

    Science.gov (United States)

    2014-06-20

    Canada , Mexico, Russia, or Japan. The Migratory Bird Treaty Act protects many common bird species potentially present within the project sites...A.sSc.’ SSn ’!<’ot (EA> under the ~1;11tiona• l~nv1ronnltlltal Policy Act (NJ;.J’A) JOr the closure of29 larg~pacity ci;:i;.spools (t.CCs) on Bellows

  12. Final Environmental Assessment: Addressing Construction of a New Civil Engineering Workshop at Bellows Air Force Station, O’ahu, Hawaii

    Science.gov (United States)

    2010-03-01

    Outcrop soil types reflect the installation’s property and coastal location. Much of the remaining soils are colluvial material derived from basalt and...29 U.S.C. 669 et seq. Section 112 of the CAA regulates emissions of asbestos fibers to ambient air. Building materials in older buildings are...addition, it is designed to protect personnel who live and work on Bellows AFS from exposure to airborne asbestos fibers , as well as to ensure the

  13. Spin transfer driven resonant expulsion of a magnetic vortex core for efficient rf detector

    Directory of Open Access Journals (Sweden)

    S. Menshawy

    2017-05-01

    Full Text Available Spin transfer magnetization dynamics have led to considerable advances in Spintronics, including opportunities for new nanoscale radiofrequency devices. Among the new functionalities is the radiofrequency (rf detection using the spin diode rectification effect in spin torque nano-oscillators (STNOs. In this study, we focus on a new phenomenon, the resonant expulsion of a magnetic vortex in STNOs. This effect is observed when the excitation vortex radius, due to spin torques associated to rf currents, becomes larger than the actual radius of the STNO. This vortex expulsion is leading to a sharp variation of the voltage at the resonant frequency. Here we show that the detected frequency can be tuned by different parameters; furthermore, a simultaneous detection of different rf signals can be achieved by real time measurements with several STNOs having different diameters. This result constitutes a first proof-of-principle towards the development of a new kind of nanoscale rf threshold detector.

  14. A Reappraisal of the Expulsion of Illegal Immigrants from Nigeria in 1983

    Directory of Open Access Journals (Sweden)

    Daouda Gary-Tounkara

    2016-04-01

    Full Text Available In recent years, Nigeria has been quietly expelling more and more immigrants from Niger, Mali, Chad and Cameroon. These foreigners – migrant workers or small traders – face the reinforcement of migration control and the blind fight of the government against Boko Haram. Despite its political instability, Nigeria remains a major immigration destination in West Africa. In this article, I analyze the “undocumented” expulsion of aliens in 1983, officially three million people. I argue that the expulsion was due to the economic crisis but also to a nationalist revenge against Ghana and a political calculation of President Shagari. This implies the exclusion of foreigners from the national labour market and the weakening of the supposed electoral base of his opponents.

  15. The Expulsion of "Pernicious" Foreigners in Colombia in Recent Years of Conservative Hegemony

    Directory of Open Access Journals (Sweden)

    Roger Pita Pico

    2017-01-01

    Full Text Available In the early twentieth century occurred in Colombia increased influx of foreigners but also increased political control in the entry and stay of these individuals. As part of social history and documentaries based on archival sources, this paper analyzes the process of expulsion of undocumented aliens and "pernicious" at the end of the presidential government of Miguel Abadía Mendez (1926-1930. This article aims to examine the reasons for these deportations, the measures taken against women prostitutes, the fate of the escapees and absolved and, finally, the complications that revolved around expulsion proceedings. This concern of the government by the presence of foreigners "pernicious" was in the interest of achieving national security through a social model in which were seriously questioned practices such as vagrancy, begging, theft, fraud, prostitution and seditious political activities.

  16. Saskia Sassen, Expulsions. Brutalité et complexité dans l’économie globale

    OpenAIRE

    Henrio, Yannick

    2016-01-01

    Dans Expulsions, la sociologue et économiste Saskia Sassen, spécialiste de la mondialisation, auteure notamment de Global City, où elle faisait déjà le constat d’une polarisation des inégalités sociales et économiques dans les villes mondiales, poursuit sa réflexion et émet l’hypothèse que « sous les aspects nationaux des diverses crises globales se manifestent des tendances systémiques émergentes, formées par une dynamique fondamentale élémentaire » (p. 19). L’« expulsion » serait l’expressi...

  17. Posterior Uterine Rupture Causing Fetal Expulsion into the Abdominal Cavity: A Rare Case of Neonatal Survival

    Directory of Open Access Journals (Sweden)

    K. Navaratnam

    2011-01-01

    Full Text Available Introduction. Uterine rupture is a potentially catastrophic complication of vaginal birth after caesarean section. We describe the sixth case of posterior uterine rupture, with intact lower segment scar, and the first neonatal survival after expulsion into the abdominal cavity with posterior rupture. Case Presentation. A multiparous woman underwent prostaglandin induction of labour for postmaturity, after one previous caesarean section. Emergency caesarean section for bradycardia revealed a complete posterior uterine rupture, with fetal and placental expulsion. Upon delivery, the baby required inflation breaths only. The patient required a subtotal hysterectomy but returned home on day 5 postnatally with her healthy baby. Discussion. Vaginal birth after caesarean section constitutes a trial of labour, and the obstetrician must be reactive to labour events. Posterior uterine rupture is extremely rare and may occur without conventional signs. Good maternal and fetal outcome is possible with a prompt, coordinated team response.

  18. Flux expulsion and trapping in rotating discs of type II superconductors

    International Nuclear Information System (INIS)

    Boyer, R.; Leblanc, M.A.R.

    1977-01-01

    The magnetic flux rotating in step with a type II superconducting disc is measured with orthogonal pick up coils for various previous magnetic histories vs H 0 applied at right angles to the axis of rotation. For some initial magnetic states, flux expulsion, independent of the rate of rotation, occurs during the initial rotation. A simple model where flux lines leave the specimen against the magnetic pressure in the active region accounts for the observations. (author)

  19. Partial spontaneous anal expulsion of the right colon lipoma: An exceptional diagnostic circumstance

    Directory of Open Access Journals (Sweden)

    Fahmi Hamila

    Full Text Available Introduction: Lipomas are most common benign tumors of the colon. They are asymptomatic and fortuitously discovered on a morphological examination. Rarely, they cause complications such as acute intussusception. In this article, we reported an exceptional discovery mode of right colon lipoma. Case presentation: A 54-year-old woman has consulted for acute abdominal pain relieved by the anus emission of a fat ball that she brought back with her. Abdominal computed tomography scan showed the remaining part of a lipoma developed in her right colon. Laparoscopic right colonic resection was performed. Discussion: Colic lipomas are usually asymptomatic and surgical indication in these cases is debated, but it is indicated whenever complications occur such as acute intestinal intussusception. In this case, discovery mode was not considered as a complication because lipoma evacuation could have been complete. Radiological explorations and colonoscopy could evaluate the lesional state. When surgery is decided, intersecting therapeutic strategy of a short colonic resection guided by a colonization during colonoscopy should be considered. Conclusion: The spontaneous expulsion of a colonic lipoma is very rare. Our observation showed that this expulsion may be partial. +The changes that the lipoma undergoes can evoke a malignant cause. a supplement to take care of this eventuality is necessary. Keywords: Colonic lipoma, Spontaneous expulsion, Colectomy

  20. Tamsulosin versus tamsulosin plus tadalafil as medical expulsive therapy for lower ureteric stones: a randomized controlled trial.

    Science.gov (United States)

    Jayant, Kumar; Agrawal, Rajendra; Agrawal, Swati

    2014-10-01

    To compare the efficacy of tamsulosin versus tamsulosin plus tadalafil as medical expulsive therapy for lower ureteric stones. Between January 2013 and December 2013, 244 patients presenting with distal ureteric stones (size 5-10 mm) were randomized equally to tamsulosin (group A) or tamsulosin plus tadalafil (group B). Therapy was given for a maximum of 4 weeks. Stone expulsion rate, time to stone expulsion, analgesic use, number of hospital visits for pain, follow up, endoscopic treatment and adverse effects of drugs were recorded. Statistical analyses were carried out using Student's t-test and the χ(2) -test. There was a statistically significant higher expulsion rate in group B compared with group A (83.6% vs 65.5%; P-value = 0.031) and a shorter time to expulsion (14.9 ± 4.4 days vs 16.7 ± 4.8 days; P-value = 0.003). Statistically significant differences were noted in terms of the number of hospital visits and analgesic requirement in favor of group B. There was no serious adverse event. An improvement in erectile function was noted in patients of group B compared with those of group A. Medical expulsive therapy for distal ureteric stones using tamsulosin plus tadalafil is safe, effective and well tolerated. Furthermore, tadalafil provides the additional advantage of improving erectile dysfunction when this condition coexists with a lower ureteric stone. © 2014 The Japanese Urological Association.

  1. Design, Analysis and Implementation of an Experimental System to Harvest Energy From Atmospheric Temperature Variations Using Ethyl Chloride Filled Bellows

    Science.gov (United States)

    Ali, Gibran

    The increase in global warming and the dwindling supplies of fossil fuels have shifted the focus from traditional to alternate sources of energy. This has resulted in a concerted effort towards finding new energy sources as well as better understanding traditional renewable energy sources such as wind and solar power. In addition to the shift in focus towards alternate energy, the last two decades have offered a dramatic rise in the use of digital technologies such as wireless sensor networks that require small but isolated power supplies. Energy harvesting, a method to gather energy from ambient sources including sunlight, vibrations, heat, etc., has provided some success in powering these systems. One of the unexplored areas of energy harvesting is the use of atmospheric temperature variations to obtain usable energy. This thesis investigates an innovative mechanism to extract energy from atmospheric variations using ethyl chloride filled mechanical bellows. The energy harvesting process was divided into two parts. The first part consisted of extracting energy from the temperature variations and converting it into the potential energy stored in a linear coil spring. This was achieved by designing and fabricating an apparatus that consisted of an ethyl chloride filled bellows working against a mechanical spring in a closed and controlled environment. The bellows expanded/contracted depending upon the ambient temperature and the energy harvested was calculated as a function of the bellows' length. The experiments showed that 6 J of potential energy may be harvested for a 23°C change in temperature. The numerical results closely correlated to the experimental data with an error magnitude of 1%. In regions with high diurnal temperature variation, such an apparatus may yield approximately 250 microwatts depending on the diurnal temperature range. The second part of the energy harvesting process consisted of transforming linear expansion of the bellows into electric

  2. Uterine restoration after repeated sloughing of fibroids or vaginal expulsion following uterine artery embolization

    Energy Technology Data Exchange (ETDEWEB)

    Park, Hye Ri; Kim, Nack Keun; Lee, Mee Hwa [Pochon CHA University, Department of Obstetrics and Gynecology, Bundang CHA General Hospital, Sungnam-si, Kyonggi-do (Korea); Kim, Man Deuk; Kim, Hee Jin; Yoon, Sang-Wook [Pochon CHA University, Department of Diagnostic Radiology, Bundang CHA General Hospital, Sungnam-si, Kyonggi-do (Korea); Park, Won Kyu [Yeungnam University, Department of Diagnostic Radiology, Kyongson, Dyongbuk (Korea)

    2005-09-01

    The aim of our study is to present our experience with uterine restoration after repeated sloughing of uterine fibroids or transvaginal expulsion following uterine artery embolization (UAE) and to determine its safety and outcome. One hundred and twenty-four women (mean age, 40.3 years; age range, 29-52 years) with symptomatic uterine fibroids were included in this retrospective study. We performed arterial embolization with poly(vinyl alcohol) particles (250-710 {mu}m). Clinical symptoms and follow-up information for each patient were obtained through medical records. At an average of 3.5 months (range, 1-8 months) after embolization, magnetic resonance imaging examinations with T1- and T2-weighted and gadolinium-enhanced T1-weighted images were obtained for all patients. The mean follow-up duration was 120 days (90-240 days). Eight (6.5%) patients experienced uterine restoration after repeated sloughing of uterine fibroids or spontaneous transvaginal expulsion. The locations of the leiomyomas were submucosal (n=5), intramural (n=2) and transmural (n=1). The maximum diameter of the fibroids ranged from 3.5 to 18.0 cm, with a mean of 8.4 cm. The time interval from embolization to the uterine restoration was 7-150 days (mean 70.5 days). The clinical symptoms before and during vaginal sloughing or expulsion were lower abdominal pain (n=4), vaginal discharges (n=3), infection of necrotic myomas (n=2) and cramping abdominal pain (n=1). Gentle abdominal compression (n=1) and hysteroscopic assistance (n=1) were required to remove the whole fibroid. No other clinical sequelae, either early or delayed, were documented. Magnetic resonance images revealed the disappearance of leiomyomas, intracavitary rupture resulting in transformation of intramural or transmural myomas into submucosal myomas and localized uterine wall defects. Although the small size of this study precludes a strict conclusion, there appear to be few serious complications directly related to vaginal

  3. Uterine restoration after repeated sloughing of fibroids or vaginal expulsion following uterine artery embolization

    International Nuclear Information System (INIS)

    Park, Hye Ri; Kim, Nack Keun; Lee, Mee Hwa; Kim, Man Deuk; Kim, Hee Jin; Yoon, Sang-Wook; Park, Won Kyu

    2005-01-01

    The aim of our study is to present our experience with uterine restoration after repeated sloughing of uterine fibroids or transvaginal expulsion following uterine artery embolization (UAE) and to determine its safety and outcome. One hundred and twenty-four women (mean age, 40.3 years; age range, 29-52 years) with symptomatic uterine fibroids were included in this retrospective study. We performed arterial embolization with poly(vinyl alcohol) particles (250-710 μm). Clinical symptoms and follow-up information for each patient were obtained through medical records. At an average of 3.5 months (range, 1-8 months) after embolization, magnetic resonance imaging examinations with T1- and T2-weighted and gadolinium-enhanced T1-weighted images were obtained for all patients. The mean follow-up duration was 120 days (90-240 days). Eight (6.5%) patients experienced uterine restoration after repeated sloughing of uterine fibroids or spontaneous transvaginal expulsion. The locations of the leiomyomas were submucosal (n=5), intramural (n=2) and transmural (n=1). The maximum diameter of the fibroids ranged from 3.5 to 18.0 cm, with a mean of 8.4 cm. The time interval from embolization to the uterine restoration was 7-150 days (mean 70.5 days). The clinical symptoms before and during vaginal sloughing or expulsion were lower abdominal pain (n=4), vaginal discharges (n=3), infection of necrotic myomas (n=2) and cramping abdominal pain (n=1). Gentle abdominal compression (n=1) and hysteroscopic assistance (n=1) were required to remove the whole fibroid. No other clinical sequelae, either early or delayed, were documented. Magnetic resonance images revealed the disappearance of leiomyomas, intracavitary rupture resulting in transformation of intramural or transmural myomas into submucosal myomas and localized uterine wall defects. Although the small size of this study precludes a strict conclusion, there appear to be few serious complications directly related to vaginal

  4. Intrarectal pressures and balloon expulsion related to evacuation proctography.

    Science.gov (United States)

    Halligan, S; Thomas, J; Bartram, C

    1995-01-01

    Seventy four patients with constipation were examined by standard evacuation proctography and then attempted to expel a small, non-deformable rectal balloon, connected to a pressure transducer to measure intrarectal pressure. Simultaneous imaging related the intrarectal position of the balloon to rectal deformity. Inability to expel the balloon was associated proctographically with prolonged evacuation, incomplete evacuation, reduced anal canal diameter, and acute anorectal angulation during evacuation. The presence and size of rectocoele or intussusception was unrelated to voiding of paste or balloon. An independent linear combination of pelvic floor descent and evacuation time on proctography correctly predicted maximum intrarectal pressure in 74% of cases. No patient with both prolonged evacuation and reduced pelvic floor descent on proctography could void the balloon, as maximum intrarectal pressure was reduced in this group. A prolonged evacuation time on proctography, in combination with reduced pelvic floor descent, suggests defecatory disorder may be caused by inability to raise intrarectal pressure. A diagnosis of anismus should not be made on proctography solely on the basis of incomplete/prolonged evacuation, as this may simply reflect inadequate straining. PMID:7672656

  5. Insight into the process of product expulsion in cellobiohydrolase Cel6A from Trichoderma reesei by computational modeling.

    Science.gov (United States)

    Huang, Houhou; Han, Fei; Guan, Shanshan; Qian, Mengdan; Wan, Yongfeng; Shan, Yaming; Zhang, Hao; Wang, Song

    2018-03-24

    Glycoside hydrolase cellulase family 6 from Trichoderma reesei (TrCel6A) is an important cellobiohydrolase to hydrolyze cellooligosaccharide into cellobiose. The knowledge of enzymatic mechanisms is critical for improving the conversion efficiency of cellulose into ethanol or other chemicals. However, the process of product expulsion, a key component of enzymatic depolymerization, from TrCel6A has not yet been described in detail. Here, conventional molecular dynamics and steered molecular dynamics (SMD) were applied to study product expulsion from TrCel6A. Tyr103 may be a crucial residue in product expulsion given that it exhibits two different posthydrolytic conformations. In one conformation, Tyr103 rotates to open the -3 subsite. However, Tyr103 does not rotate in the other conformation. Three different routes for product expulsion were proposed on the basis of the two different conformations. The total energy barriers of the three routes were calculated through SMD simulations. The total energy barrier of product expulsion through Route 1, in which Tyr103 does not rotate, was 22.2 kcal·mol -1 . The total energy barriers of product expulsion through Routes 2 and 3, in which Tyr103 rotates to open the -3 subsite, were 10.3 and 14.4 kcal·mol -1 , respectively. Therefore, Routes 2 and 3 have lower energy barriers than Route 1, and Route 2 is the thermodynamically optimal route for product expulsion. Consequently, the rotation of Tyr103 may be crucial for product release from TrCel6A. Results of this work have potential applications in cellulase engineering.

  6. Comparative efficacy of tamsulosin versus tadalafil as medical expulsive therapy for distal ureteric stones.

    Science.gov (United States)

    Goyal, Suresh Kumar; Singh, Vikash; Pandey, Himanshu; Chhabra, Mahaveer Kumar; Aggarwal, Satinder Pal; Bhat, Amilal

    2018-01-01

    The objective of this study was to compare the relative efficacy of tamsulosin and tadalafil as medical expulsive therapy for distal ureteric stones. This was a prospective study performed between December 2014 and February 2016. A total of 123 adult patients (>18 years of age) presenting with distal ureteric stones sized 6-10 mm were randomized to treatment with tamsulosin 0.4 mg once daily (Group A) or tadalafil10 mg once daily (Group B). Therapy was given for a maximum of 4 weeks. The stone expulsion rate was the primary endpoint. Time to stone expulsion, number of colic episodes, analgesic use, number of hospital visits for pain, endoscopic treatment, and adverse effects of the drugs were noted. Statistical analyses were done using Fisher's exact test and Chi-square test. A total of 61 patients were included in tamsulosin group and 62 patients in tadalafil group. A statistically insignificant difference was found for stone clearance rate between both groups as a whole (Group A-73.77%, Group B-69.35%, P = 0.690) as well as when we considered both subgroups (A1-78.05%, B1-75.0%, P = 0.802; A2-65.0%, B2-55.6%, P = 0.741). All the primary and secondary outcome measures were more in favour of stones ≤8 mm size than stones >8 mm size. No statistical difference was found for adverse drug effects except for retrograde ejaculation, which was significantly high in tamsulosin group ( P tamsulosin is more effective for stone clearance than tadalafil, but this difference was not significant ( P = 0.690).

  7. The effect of inhibition of prostaglandin F2 alpha synthesis on placental expulsion in the ewe.

    Science.gov (United States)

    Chassagne, M; Barnouin, J

    1993-04-01

    Five ewes were injected with two doses of a nonsteroidal anti-inflammatory drug (NSAI), lysine acetyl salicylate, at birth of their first lamb and one hour later, and five others were injected once only, at birth of their first lamb. A control group of six animals was constituted. The times needed for fetal expulsion and placental release were recorded. The peripheral plasma PgF2 alpha (as PGFM) levels were measured prepartum during the seven last days of gestation, at parturition, then 1 h, 2 h and 12 h after lambing. The results were compared among and within treatment groups. They indicate that the physiological increase in peripheral PGFM levels starts two days before lambing and that the level peaks at lambing. The normal decrease after parturition is emphasized by NSAI injections as detected 1 h and 2 h posttreatment (p NSAI drug is short-acting as revealed by the lower PGFM levels in twice-treated animals 2 h after birth compared to once treated animals and the similar low levels in all three groups 12 h after birth. The fetal membranes were expelled normally in all treated and nontreated animals, but the time needed for placental expulsion in ewes injected with two doses of NSAI was longer than in controls (p < 0.05). A negative correlation (p < 0.05) was found between plasma PGFM levels measured two hours after lambing and the time needed for fetal membrane expulsion. PgF2 alpha appears to have a role in placental release in the ewe.

  8. Rates of chemical reaction and atmospheric heating during core debris expulsion from a pressurized vessel

    International Nuclear Information System (INIS)

    Powers, D.A.; Tarbell, W.W.; Brockman, J.E.; Pilch, M.

    1986-01-01

    Core debris may be expelled from a pressurized reactor vessel during a severe nuclear reactor accident. Experimental studies of core debris expulsion from pressurized vessels have established that the expelled material can be lofted into the atmosphere of the reactor containment as particulate 0.4 to 2 mm in diameter. These particles will vigorously react with steam and oxygen in the containment atmosphere. Data on such reactions during tests with 80 kg of expelled melt will be reported. A model of the reaction rates based on gas phase mass transport will be described and shown to account for atmospheric heating and aerosol generation observed in the tests

  9. The effect of inhibition of prostaglandin F2 alpha synthesis on placental expulsion in the ewe.

    OpenAIRE

    Chassagne, M; Barnouin, J

    1993-01-01

    Five ewes were injected with two doses of a nonsteroidal anti-inflammatory drug (NSAI), lysine acetyl salicylate, at birth of their first lamb and one hour later, and five others were injected once only, at birth of their first lamb. A control group of six animals was constituted. The times needed for fetal expulsion and placental release were recorded. The peripheral plasma PgF2 alpha (as PGFM) levels were measured prepartum during the seven last days of gestation, at parturition, then 1 h, ...

  10. A comparison of nifedipine and tamsulosin as medical expulsive therapy for the management of lower ureteral stones without ESWL.

    Science.gov (United States)

    Cao, Dehong; Yang, Lu; Liu, Liangren; Yuan, Haichao; Qian, Shenqiang; Lv, Xiao; Han, Pin; Wei, Qiang

    2014-06-11

    Administration of nifedipine or tamsulosin has been suggested to augment stone expulsion rates. We aimed to compare the stone expulsion rates and adverse effects associated with the use of nifedipine or tamsulosin as medical expulsive therapy (MET) for the management of lower ureteral stones (LUS) without extracorporeal shock wave lithotripsy (ESWL) via a literature review and meta-analysis. Relevant randomized controlled trials (RCTs) were identified from the Medline, EMBASE, Cochrane CENTRAL, and Google Scholar databases. Finally, a total of 7 RCTs with 3897 patients were included. Our meta-analysis showed that tamsulosin could significantly increase the stone expulsion rate relative to nifedipine in patients with LUS (random-effects model; risk ratio [RR] = 0.81; 95% confidence interval [CI] = 0.75-0.88; P < 0.00001). The subgroup analysis indicated no statistically significant difference between the drugs with regard to minor or major adverse effects (fixed-effect model; RR = 1.19, 95% CI = 0.91-1.54, P = 0.20; and RR = 1.63, 95% CI = 0.22-11.82, P = 0.63, respectively). This meta-analysis demonstrated that tamsulosin was more effective than nifedipine in patients with LUS, as evidenced by the higher stone expulsion rate. Tamsulosin treatment should therefore be considered for patients with LUS.

  11. Joseph Clover and the cobra: a tale of snake envenomation and attempted resuscitation with bellows in London, 1852.

    Science.gov (United States)

    Ball, C

    2010-07-01

    The Industrial Revolution saw the creation of many new jobs, but probably none more curious than that of zookeeper. The London Zoological Gardens, established for members in 1828, was opened to the general public in 1847. In 1852 the "Head Keeper in the Serpent Room", Edward Horatio Girling, spent a night farewelling a friend departing for Australia. He arrived at work in an inebriated state and was bitten on the face by a cobra that he was handling in a less than sensible manner. He was taken by cab to University College Hospital where he was resuscitated by a number of doctors, including Joseph Clover then the resident medical officer to the hospital and later to become the leading anaesthetist in London. Clover recorded this event in his diary along with the resuscitation method used. The patient eventually died but his treatment created a flurry of correspondence in the medical and lay press. Interestingly, the attempted resuscitation was with bellows, which had been abandoned by the Royal Humane Society twenty years earlier Clover records other cases of resuscitation with bellows at University College Hospital during his time as a resident medical officer there (1848 to 1853). There is a casebook belonging to Joseph Clover in the Geoffrey Kaye Museum, in Melbourne. This story is one of the many interesting stories uncovered during a study of this book and Clover's other personal papers.

  12. Fluid expulsion sites on the Cascadia accretionary prism: mapping diagenetic deposits with processed GLORIA imagery

    Science.gov (United States)

    Carson, Bobb; Seke, Erol; Paskevich, Valerie F.; Holmes, Mark L.

    1994-01-01

    Point-discharge fluid expulsion on accretionary prisms is commonly indicated by diagenetic deposition of calcium carbonate cements and gas hydrates in near-surface (topographic and lithologic information. We have processed GLORIA imagery from the Oregon continental margin to remove topographic effects. A synthetic side scan image was created initially from Sea Beam bathymetric data and then was subtracted iteratively from the original GLORIA data until topographic features disappeared. The residual image contains high-amplitude backscattering that we attribute to diagenetic deposits associated with fluid discharge, based on submersible mapping, Ocean Drilling Program drilling, and collected samples. Diagenetic deposits are concentrated (1) near an out-of-sequence thrust fault on the second ridge landward of the base of the continental slope, (2) along zones characterized by deep-seated strikeslip faults that cut transversely across the margin, and (3) in undeformed Cascadia Basin deposits which overlie incipient thrust faults seaward of the toe of the prism. There is no evidence of diagenetic deposition associated with the frontal thrust that rises from the dècollement. If the dècollement is an important aquifer, apparently the fluids are passed either to the strike-slip faults which intersect the dècollement or to the incipient faults in Cascadia Basin for expulsion. Diagenetic deposits seaward of the prism toe probably consist dominantly of gas hydrates.

  13. Inducer expulsion in Streptococcus pyogenes: properties and mechanism of the efflux reaction

    International Nuclear Information System (INIS)

    Sutrina, S.L.; Reizer, J.; Saier, M.H Jr.

    1988-01-01

    Expulsion of preaccumulated methyl-β-D-thiogalactoside-phosphate (TMG-P) from Streptococcus pyogenes is a two-step process comprising intracellular dephosphorylation of TMG-P followed by rapid efflux of the intracellularly formed free galactoside. The present study identifies the mechanism and the order and characterizes the temperature dependency of the efflux step. Unidirectional efflux of the intracellularly formed [ 14 C]TMG was only slightly affected when measured in the presence of unlabeled TMG (25 to 400 mM) in the extracellular medium. In contrast, pronounced inhibition of net efflux was observed in the presence of relatively low concentrations (1 to 16 mM) of extracellular [ 14 C]TMG. Since net efflux was nearly arrested when the external concentration of [ 14 C]TMG approached the intracellular concentration of this sugar, we propose that a facilitated diffusion mechanism is responsible for efflux and equilibration of TMG between the intracellular and extracellular milieus. The exit reaction was markedly dependent upon temperature, exhibited a high energy of activation (23 kcal [ca. 96 kJ] per mol), and followed first-order kinetics, indicating that the permease mediating this efflux was not saturated under the conditions of expulsion employed

  14. Strongyloides ratti: implication of mast cell-mediated expulsion through FcεRI-independent mechanisms

    Directory of Open Access Journals (Sweden)

    Watanabe K.

    2009-09-01

    Full Text Available In order to examine whether FcεRI-dependent degranulation of intestinal mast cells is required for expulsion of intestinal nematode Strongyloides ratti, CD45 exon6-deficient (CD45-/- mice were inoculated with S. ratti. In CD45-/- mice, egg excretion in feces persisted for more than 30 days following S. ratti larvae inoculation, whereas in wild-type (CD45+/+ mice, the eggs completely disappeared by day 20 post-infection. The number of intestinal mucosal mast cells, which are known effector cells for the expulsion of S. ratti, was 75% lower in CD45-/- mice compared with that in CD45+/+ mice. Adoptive transfer of wild-type T cells from CD45+/+ mice into CD45-/- mice reduced the duration of S. ratti infection to comparable levels observed in CD45+/+ mice, with concomitant increases in intestinal mucosal mast cells. These results showed that CD45 is not involved in the effector function of intestinal mucosal mast cells against S. ratti infection. Since FcεRI-dependent degranulation of mast cells is completely impaired in these CD45 knockout mice, we conclude that FcεRIdependent degranulation is not required in the protective function of intestinal mucosal mast cells against primary infection of S. ratti.

  15. Saskia Sassen, Expulsions. Brutalités et complexité dans l’économie globale

    OpenAIRE

    Lecadet, Clara

    2018-01-01

    Avec cet ouvrage, la sociologue américaine Saskia Sassen donne à la notion d’expulsion, généralement employée pour désigner les renvois d’étrangers en situation irrégulière ou les expulsions locatives, une portée générique. Les expulsions ont un sens à la fois politique, économique, social et écologique, constitutif d’une « limite systémique » (p. 281). L’auteure situe dans les années 1980 la phase de transition entre un modèle de type keynésien, qui avait permis l’essor à la fois de l’État-p...

  16. Essure insert expulsion after 3-month hysterosalpingogram confirmation of bilateral tubal occlusion and bilateral correct placement: case report.

    Science.gov (United States)

    Garcia, Amy L; Lewis, Rae M; Sloan, Anita Lee

    2013-01-01

    Essure hysteroscopic sterilization is an effective permanent contraception option for women, with a 99.83% effectiveness rate. To date, more than 600,000 Essure procedures have been performed worldwide. This case report describes bilateral Essure insert placement, after which the left insert was subsequently expelled after hysterosalpingogram (HSG)-confirmed correct bilateral insert placement and bilateral tubal occlusion. Although insert expulsion has been reported before a 3-month post-procedure HSG, this is the first published report of expulsion after a confirmatory 3-month post-procedure HSG. Because there now exists documentation of Essure insert expulsion after a 3-month confirmatory HSG, physicians and patients should be informed of this rare occurrence. Further investigation into the causes of such an event is warranted. Copyright © 2013 AAGL. Published by Elsevier Inc. All rights reserved.

  17. Effects of sodium chloride salting and substitution with potassium chloride on whey expulsion of Cheddar cheese.

    Science.gov (United States)

    Lu, Y; McMahon, D J

    2015-01-01

    A challenge in manufacturing reduced-sodium cheese is that whey expulsion after salting decreases when less salt is applied. Our objectives were (1) to determine whether changing the salting method would increase whey syneresis when making a lower sodium cheese and (2) to better understand factors contributing to salt-induced curd syneresis. Unsalted milled Cheddar curds were salted using different salting intervals (5 or 10 min), different salting levels (20, 25, or 30g/kg), different numbers of applications when using only 20g/kg salt (1, 2, or 3 applications), and salting with the equivalent of 30g/kg NaCl using a 2:1 molar ratio of NaCl and KCl. Whey from these curds was collected every 5 or 10 min until 30 or 40 min after the start of salting, and curds were subsequently pressed for 3h. Additional trials were conducted in which salted milled Cheddar cheese curd was immersed at 22°C for 6h in various solutions to determine how milled curd pieces respond to different levels of salt and Ca. The use of 10-min intervals delayed whey syneresis without influencing total whey expulsion or cheese composition after pressing. Lowering the salt level reduced whey expulsion, resulting in cheeses with higher moisture and slightly lower pH. Adding salt faster did not increase whey expulsion in reduced-salt cheese. Partial substitution with KCl restored the extent of whey expulsion. When salted milled curd was immersed in a 30g/L salt solution, there was a net influx of salt solution into the curd and curd weight increased. When curd was immersed in 60g/L salt solution, a contraction of curd occurred. Curd shrinkage was more pronounced as the salt solution concentration was increased to 90 and 120g/L. Increasing the Ca concentration in test solutions (such that both serum and total Ca in the curd increased) also promoted curd contraction, resulting in lower curd moisture and pH and less weight gain by the curd. The proportion of Ca in the curd that was bound to the para

  18. The Impact of Materialism on the Familial Ties in Post-War American Society: A Study of Saul Bellow's Seize the Day

    Directory of Open Access Journals (Sweden)

    Mohammed Sabbar Abdulbaqi

    2017-12-01

    Full Text Available Saul Bellow (1915 –2005 is an American novelist and the winner of Nobel and Pulitzer Prizes for literature (1976. He is known for his critique of Post-II World War American society. The research discusses Saul Bellow's Seize the Day (1956 in regard of materialism and its impact on the familial ties not only in terms of monetary considerations but also the maltreatment of family members among themselves. It reviews the materialistic relationship between the father and son on the one hand and the husband and wife on the other hand. The study aims to recognize to what extent materialism represents a dispersed element for the family unit.

  19. The Impact of Materialism on the Familial Ties in Post-War American Society: A Study of Saul Bellow's Seize the Day

    OpenAIRE

    Mohammed Sabbar Abdulbaqi

    2017-01-01

    Saul Bellow (1915 –2005) is an American novelist and the winner of Nobel and Pulitzer Prizes for literature (1976). He is known for his critique of Post-II World War American society. The research discusses Saul Bellow's Seize the Day (1956) in regard of materialism and its impact on the familial ties not only in terms of monetary considerations but also the maltreatment of family members among themselves. It reviews the materialistic relationship between the father and son on the one hand an...

  20. Comparison of three most frequently used alpha blocker agents in medical expulsive therapy for distal ureteral calculi, result of a retrospective observational study

    Directory of Open Access Journals (Sweden)

    Aykut Buğra Sentürk

    2018-03-01

    Full Text Available Purpose: In this study, we compared the effects of three agents frequently used in daily life for medical expulsive therapy. Materials and methods: A total of 143 patients meeting the criteria were included in the study. Patients were divided into three homogeneous drug groups which were tamsulosin group (n:48, alfuzosin group (n:47 and silodosin group (n:48. The time of stone expulsion, analgesic needs, side effects of the medicine and endoscopic intervention needs of the patients were recorded. Results: The rate of stone expulsion was 70.8% (n:34 in tamsulosin group, 70.2% (n:33 in alfuzosin group, and 75% (n:36 in silodosin group. No significant difference was observed among the rates of stone expulsion in three groups, and the rates of stone expulsion were similar (p = 0.778. The duration of stone expulsion was significantly different in the groups (p = 0.012: the time of stone expulsion for tamsulosin was 2.33 ± 0.78 days longer than for Silodosin, indicating a significant difference. There was no significant difference between tamsulosin-alfuzosin and silodosin-alfuzosin (respectively p = 0.147, p = 0.925. Conclusions: The results of this study showed that medical expulsive therapy by using alpha blocker agents is safe and efficacious. This option must be kept in mind for patients who do not ask for surgery as the first-step treatment for eligible patients.

  1. Structures of BmrR-Drug Complexes Reveal a Rigid Multidrug Binding Pocket And Transcription Activation Through Tyrosine Expulsion

    Energy Technology Data Exchange (ETDEWEB)

    Newberry, K.J.; Huffman, J.L.; Miller, M.C.; Vazquez-Laslop, N.; Neyfakh, A.A.; Brennan, R.G.

    2009-05-22

    BmrR is a member of the MerR family and a multidrug binding transcription factor that up-regulates the expression of the bmr multidrug efflux transporter gene in response to myriad lipophilic cationic compounds. The structural mechanism by which BmrR binds these chemically and structurally different drugs and subsequently activates transcription is poorly understood. Here, we describe the crystal structures of BmrR bound to rhodamine 6G (R6G) or berberine (Ber) and cognate DNA. These structures reveal each drug stacks against multiple aromatic residues with their positive charges most proximal to the carboxylate group of Glu-253 and that, unlike other multidrug binding pockets, that of BmrR is rigid. Substitution of Glu-253 with either alanine (E253A) or glutamine (E253Q) results in unpredictable binding affinities for R6G, Ber, and tetraphenylphosphonium. Moreover, these drug binding studies reveal that the negative charge of Glu-253 is not important for high affinity binding to Ber and tetraphenylphosphonium but plays a more significant, but unpredictable, role in R6G binding. In vitro transcription data show that E253A and E253Q are constitutively active, and structures of the drug-free E253A-DNA and E253Q-DNA complexes support a transcription activation mechanism requiring the expulsion of Tyr-152 from the multidrug binding pocket. In sum, these data delineate the mechanism by which BmrR binds lipophilic, monovalent cationic compounds and suggest the importance of the redundant negative electrostatic nature of this rigid drug binding pocket that can be used to discriminate against molecules that are not substrates of the Bmr multidrug efflux pump.

  2. Sushruta in 600 B.C. introduced extraocular expulsion of lens material.

    Science.gov (United States)

    Grzybowski, Andrzej; Ascaso, Francisco J

    2014-03-01

    It is generally accepted that Jacques Daviel introduced in the 18th century the extracapsular technique of extraction of the lens while the couching method of cataract operation had already been practiced since ancient times. Present study analyses the first known cataract surgery description in three translations into English from the original Sanskrit Sushruta textbook and all the available literature on the subject. We found evidences that some sort of extraocular expulsion of lens material through a limbal puncture (paracentesis) was described by the Indian surgeon. Nevertheless, this incision cannot be considered as a classic extracapsular procedure because it was not large enough to allow the extraction of the entire lens. © 2013 The Authors. Acta Ophthalmologica © 2012 Acta Ophthalmologica Scandinavica Foundation.

  3. Quench pressure, thermal expulsion, and normal zone propagation in internally cooled superconductors

    International Nuclear Information System (INIS)

    Dresner, L.

    1988-01-01

    When a nonrecovering normal zone appears in an internally cooled superconductor, the pressure in the conductor rises, helium is expelled from its ends, and the normal zone grows in size. This paper presents a model of these processes that allows calculation of the pressure, the expulsion velocity, and the propagation velocity with simple formulas. The model is intended to apply to conductors such as the cable-in-conduit conductor of the Westinghouse LCT (WH-LCT) coil, the helium volumes of which have very large length-to-diameter ratios (3 /times/ 10 5 ). The predictions of the model agree with the rather limited data available from propagation experiments carried out on the WH-LCT coil. 3 refs., 1 fig

  4. Immune expulsion of Trichuris muris from resistant mice: suppression by irradiation and restoration by transfer of lymphoid cells

    International Nuclear Information System (INIS)

    Wakelin, D.; Selby, G.R.

    1976-01-01

    Lethal irradiation (850 rads of x rays) of mice made resistant to Trichuris muris markedly depressed their ability to expel a challenge infection. Expulsion was restored within 7 to 10 days when MLNC from uninfected mice were transferred on the day of infection, but no significant restoration was evident after transfer of immune serum. Transfer of Bm alone had no restorative effect within 10 days and no synergism was seen when both BM and MLNC were transferred. MLNC from uninfected donors did not restore challenge expulsion when transfer was delayed until day 7 and the mice were killed 3 days later, although MLNC from resistant donors were effective within this time. When irradiated mice were given BM and the challenge infection allowed to continue for 15 days expulsion was restored, as it was when challenge was delayed for 7 days after BM transfer in thymectomized mice. The results confirm that expulsion of T. muris involves both antibody-mediated and lymphoid cell-mediated phases and offer no evidence for the involvement of other cell types. (author)

  5. Preschool Teachers' Responses to Challenging Behavior: The Role of Organizational Climate in Referrals and Expulsions

    Science.gov (United States)

    Miller, Shauna; Smith-Bonahue, Tina; Kemple, Kristen

    2017-01-01

    Challenging behavior in preschool can lead to harmful outcomes for some children. While interventions have been shown to be effective in reducing or eliminating challenging behavior, evidence suggests that young children with challenging behavior are under-identified for services, increasing their risk for expulsion from early childhood programs.…

  6. Parturition in gilts: duration of farrowing, birth intervals and placenta expulsion in relation to maternal, piglet and placental traits

    NARCIS (Netherlands)

    Rens, van B.T.T.M.; Lende, van der T.

    2004-01-01

    Large White×Meishan F2 crossbred gilts (n=57) were observed continuously during farrowing while the placentae of their offspring were labeled in order to examine the duration of farrowing and placenta expulsion in relation to maternal-, piglet- and placental traits and the duration of birth interval

  7. Children in Crisis: Special Education Status and Other Stressors in the Lives of Children Removed from School by Expulsion

    Science.gov (United States)

    Edmonds-Cady, Cynthia; Hock, Robert

    2008-01-01

    This exploratory qualitative study examines what occurred in the lives of kindergarten through twelfth-grade students who were expelled from school in order to understand possible stressors in their lives. Data were obtained on expulsion cases from a variety of school districts in one midwestern state. The sample (N = 91) consisted of the total…

  8. Moderate Thermal Stress Causes Active and Immediate Expulsion of Photosynthetically Damaged Zooxanthellae (Symbiodinium from Corals.

    Directory of Open Access Journals (Sweden)

    Lisa Fujise

    Full Text Available The foundation of coral reef biology is the symbiosis between corals and zooxanthellae (dinoflagellate genus Symbiodinium. Recently, coral bleaching, which often results in mass mortality of corals and the collapse of coral reef ecosystems, has become an important issue around the world as coral reefs decrease in number year after year. To understand the mechanisms underlying coral bleaching, we maintained two species of scleractinian corals (Acroporidae in aquaria under non-thermal stress (27°C and moderate thermal stress conditions (30°C, and we compared the numbers and conditions of the expelled Symbiodinium from these corals. Under non-thermal stress conditions corals actively expel a degraded form of Symbiodinium, which are thought to be digested by their host coral. This response was also observed at 30°C. However, while the expulsion rates of Symbiodinium cells remained constant, the proportion of degraded cells significantly increased at 30°C. This result indicates that corals more actively digest and expel damaged Symbiodinium under thermal stress conditions, likely as a mechanism for coping with environmental change. However, the increase in digested Symbiodinium expulsion under thermal stress may not fully keep up with accumulation of the damaged cells. There are more photosynthetically damaged Symbiodinium upon prolonged exposure to thermal stress, and corals release them without digestion to prevent their accumulation. This response may be an adaptive strategy to moderate stress to ensure survival, but the accumulation of damaged Symbiodinium, which causes subsequent coral deterioration, may occur when the response cannot cope with the magnitude or duration of environmental stress, and this might be a possible mechanism underlying coral bleaching during prolonged moderate thermal stress.

  9. Moderate Thermal Stress Causes Active and Immediate Expulsion of Photosynthetically Damaged Zooxanthellae (Symbiodinium) from Corals.

    Science.gov (United States)

    Fujise, Lisa; Yamashita, Hiroshi; Suzuki, Go; Sasaki, Kengo; Liao, Lawrence M; Koike, Kazuhiko

    2014-01-01

    The foundation of coral reef biology is the symbiosis between corals and zooxanthellae (dinoflagellate genus Symbiodinium). Recently, coral bleaching, which often results in mass mortality of corals and the collapse of coral reef ecosystems, has become an important issue around the world as coral reefs decrease in number year after year. To understand the mechanisms underlying coral bleaching, we maintained two species of scleractinian corals (Acroporidae) in aquaria under non-thermal stress (27°C) and moderate thermal stress conditions (30°C), and we compared the numbers and conditions of the expelled Symbiodinium from these corals. Under non-thermal stress conditions corals actively expel a degraded form of Symbiodinium, which are thought to be digested by their host coral. This response was also observed at 30°C. However, while the expulsion rates of Symbiodinium cells remained constant, the proportion of degraded cells significantly increased at 30°C. This result indicates that corals more actively digest and expel damaged Symbiodinium under thermal stress conditions, likely as a mechanism for coping with environmental change. However, the increase in digested Symbiodinium expulsion under thermal stress may not fully keep up with accumulation of the damaged cells. There are more photosynthetically damaged Symbiodinium upon prolonged exposure to thermal stress, and corals release them without digestion to prevent their accumulation. This response may be an adaptive strategy to moderate stress to ensure survival, but the accumulation of damaged Symbiodinium, which causes subsequent coral deterioration, may occur when the response cannot cope with the magnitude or duration of environmental stress, and this might be a possible mechanism underlying coral bleaching during prolonged moderate thermal stress.

  10. Cross of Lorraine and Cross of Caravaca: new IUD's with low expulsion rates.

    Science.gov (United States)

    Coutinho, E M; Mascarenhas, M J

    1985-01-01

    The Cross of Caravaca and Cross of Lorraine IUDs with double horizontal bar design were developed in an attempt to reduce expulsion and removal rates for pain and bleeding encountered with other IUDs. The devices were manufactured in radio-opaque plastic bearing copper wire or sleeves on the top arm. The Cross of Lorraine has the upper arm shorter than the lower arm whereas in the Cross of Caravaca the shorter is the lower arm. 748 women had insertion of the Cross of Caravaca and 412 had insertion of the Cross of Lorraine. For the Cross of Caravaca 486 women completed 1 year of use, 392 completed 2 years and 310 completed 3 years. For the Cross of Lorraine, 268 women completed the 1st year, 205 the 2nd, and 150 women completed 3 years of use. The combined number of observed months of use for the 2 devices at the end of 3 years was 24,963. Accidental pregnancy rates at the end of 3 years were 1.13% for Caravaca and 3.48% for Lorraine. Expulsion rates at the end of 3 years were nil for the Cross of Lorraine and 1.16% for the Cross of Caravaca. Pain and bleeding were the most common causes of termination for medical reasons, bleeding accounting for termination in 1.66% of Lorraine users at the end of 3 years of use and 2.75% of Caravaca users. Pain accounted for termination in 3.14% of Caravaca users and 2.02% of Lorraine users. Incidence of infection was 0.42% and nil for Caravaca and Lorraine users respectively. Total discontinuation rates at the end of 3 years were 25.39% for Caravaca and 16.67% for Lorraine.

  11. A study on the expulsion of iodine from spent-fuel solutions

    Energy Technology Data Exchange (ETDEWEB)

    Sakurai, Tsutomu; Takahashi, Akira; Ishikawa, Niroh [Japan Atomic Energy Research Institute, Ibaraki-ken (Japan)] [and others

    1995-02-01

    During dissolution of spent nuclear fuels, some radioiodine remains in spent-fuel solutions. Its expulsion to dissolver off-gas is important to minimize iodine escape to the environment. In our current work, the iodine remaining in spent-fuel solutions varied from 0 to 10% after dissolution of spent PWR-fuel specimens (approximately 3 g each). The amount remaining probably was dependent upon the dissolution time required. The cause is ascribable to the increased nitrous acid concentration that results from NOx generated during dissolution. The presence of nitrous acid was confirmed spectrophotometrically in an NO-HNO{sub 3} system at 100{degrees}C. Experiments examining NOx concentration versus the quantity of iodine in a simulated spent-fuel solution indicate that iodine (I{minus}) in spent fuels is subjected to the following three reactions: (1) oxidation into I{sub 2} by nitric acid, (2) oxidation into I{sub 2} by nitrous acid arising from NOx, and (3) formation of colloidal iodine (AgI, PdI{sub 2}), the major iodine species in a spent-fuel solution. Reaction (2) competes with reaction (3) to control the quantity of iodine remaining in solution. The following two-step expulsion process to remove iodine from a spent-fuel solution was derived from these experiments: Step One - Heat spent-fuel solutions without NOx sparging. When aged colloidal iodine is present, an excess amount of iodate should be added to the solution. Step Two - Sparge the fuel solution with NOx while heating. Effect of this new method was confirmed by use of a spent PWR-fuel solution.

  12. Corruption analysis and life span forecast research on sylphon bellows of nuclear-powered steam system of ship

    International Nuclear Information System (INIS)

    Song Chao; Chen Lisheng; Song Meicun; Wang Wei

    2012-01-01

    The fracture of the corrugated pipe has a dad effect to the operation of reactor which can cause the small-break LOCA. The corrosion is the key reason of the fracture. On the base of the analysis on corruption reason of the sylphon bellows and combine the characteristic of the limited sample point of it, the Grey theory was used in the assessment of corrosion life span of corrugated pipe in nuclear steam system. Through applying the GM (1, 1) model in inferring the discipline of corrosion quantity and combining traditional statistical method, the corrosion life of steam pipe was evaluated. It indicates that the model is precise, simple and the result is reliable. (authors)

  13. Achievement of high diode sensitivity via spin torque-induced resonant expulsion in vortex magnetic tunnel junction

    Science.gov (United States)

    Tsunegi, Sumito; Taniguchi, Tomohiro; Yakushiji, Kay; Fukushima, Akio; Yuasa, Shinji; Kubota, Hitoshi

    2018-05-01

    We investigated the spin-torque diode effect in a magnetic tunnel junction with FeB free layer. Vortex-core expulsion was observed near the boundary between vortex and uniform states. A high diode voltage of 24 mV was obtained with alternative input power of 0.3 µW, corresponding to huge diode sensitivity of 80,000 mV/mW. In the expulsion region, a broad peak in the high frequency region was observed, which is attributed to the weak excitation of uniform magnetization by thermal noise. The high diode sensitivity is of great importance for device applications such as telecommunications, radar detectors, and high-speed magnetic-field sensors.

  14. Uptake and expulsion of sup 14 C-xylitol by xylitol-cultured Streptococcus mutans ATCC 25175 in vitro

    Energy Technology Data Exchange (ETDEWEB)

    Soederling, E.; Pihlanto-Leppaelae, A. (Department of Biochemistry, Institute of Dentistry, University of Turku, Turku (Finland))

    1989-01-01

    The effect of successive cultivations in the presence of 6% xylitol on the uptake and expulsion of {sup 14}C-xylitol was studied using the cells of Streptococcus mutans 25175. Three sequential cultivations did not alter the growth inhibition percentage (approximately 50%) observed in the presence of 6% xylitol. The {sup 14}C-xylitol uptake experiments performed with growing and resting cells showed that both the uptake and the expulsion of xylitol were enhanced by xylitolculturing. Both xylitol-cultured and resting control cells contained only one major labeled compound which was identified as {sup 14}C-xylitol 5-phosphate. The label subsequently was expelled from the cells as {sup 14}C-xylitol. These results indicate that S. mutans possesses an intracellular xylitol cycle and this cycle is regulated by adding xylitol to the growth medium. (author).

  15. Uptake and expulsion of 14C-xylitol by xylitol-cultured Streptococcus mutans ATCC 25175 in vitro

    International Nuclear Information System (INIS)

    Soederling, E.; Pihlanto-Leppaelae, A.

    1989-01-01

    The effect of successive cultivations in the presence of 6% xylitol on the uptake and expulsion of 14 C-xylitol was studied using the cells of Streptococcus mutans 25175. Three sequential cultivations did not alter the growth inhibition percentage (approximately 50%) observed in the presence of 6% xylitol. The 14 C-xylitol uptake experiments performed with growing and resting cells showed that both the uptake and the expulsion of xylitol were enhanced by xylitolculturing. Both xylitol-cultured and resting control cells contained only one major labeled compound which was identified as 14 C-xylitol 5-phosphate. The label subsequently was expelled from the cells as 14 C-xylitol. These results indicate that S. mutans possesses an intracellular xylitol cycle and this cycle is regulated by adding xylitol to the growth medium. (author)

  16. One-Dimensional, Two-Phase Flow Modeling Toward Interpreting Motor Slag Expulsion Phenomena

    Science.gov (United States)

    Kibbey, Timothy P.

    2012-01-01

    Aluminum oxide slag accumulation and expulsion was previously shown to be a player in various solid rocket motor phenomena, including the Space Shuttle's Reusable Solid Rocket Motor (RSRM) pressure perturbation, or "blip," and phantom moment. In the latter case, such un ]commanded side accelerations near the end of burn have also been identified in several other motor systems. However, efforts to estimate the mass expelled during a given event have come up short. Either bulk calculations are performed without enough physics present, or multiphase, multidimensional Computational Fluid Dynamic analyses are performed that give a snapshot in time and space but do not always aid in grasping the general principle. One ]dimensional, two ]phase compressible flow calculations yield an analytical result for nozzle flow under certain assumptions. This can be carried further to relate the bulk motor parameters of pressure, thrust, and mass flow rate under the different exhaust conditions driven by the addition of condensed phase mass flow. An unknown parameter is correlated to airflow testing with water injection where mass flow rates and pressure are known. Comparison is also made to full ]scale static test motor data where thrust and pressure changes are known and similar behavior is shown. The end goal is to be able to include the accumulation and flow of slag in internal ballistics predictions. This will allow better prediction of the tailoff when much slag is ejected and of mass retained versus time, believed to be a contributor to the widely-observed "flight knockdown" parameter.

  17. Anomalous water expulsion from carbon-based rods at high humidity

    Science.gov (United States)

    Nune, Satish K.; Lao, David B.; Heldebrant, David J.; Liu, Jian; Olszta, Matthew J.; Kukkadapu, Ravi K.; Gordon, Lyle M.; Nandasiri, Manjula I.; Whyatt, Greg; Clayton, Chris; Gotthold, David W.; Engelhard, Mark H.; Schaef, Herbert T.

    2016-09-01

    Three water adsorption-desorption mechanisms are common in inorganic materials: chemisorption, which can lead to the modification of the first coordination sphere; simple adsorption, which is reversible; and condensation, which is irreversible. Regardless of the sorption mechanism, all known materials exhibit an isotherm in which the quantity of water adsorbed increases with an increase in relative humidity. Here, we show that carbon-based rods can adsorb water at low humidity and spontaneously expel about half of the adsorbed water when the relative humidity exceeds a 50-80% threshold. The water expulsion is reversible, and is attributed to the interfacial forces between the confined rod surfaces. At wide rod spacings, a monolayer of water can form on the surface of the carbon-based rods, which subsequently leads to condensation in the confined space between adjacent rods. As the relative humidity increases, adjacent rods (confining surfaces) in the bundles are drawn closer together via capillary forces. At high relative humidity, and once the size of the confining surfaces has decreased to a critical length, a surface-induced evaporation phenomenon known as solvent cavitation occurs and water that had condensed inside the confined area is released as a vapour.

  18. The Expulsion of South Africa and Rhodesia from the Commonwealth Medical Association, 1947–70

    Science.gov (United States)

    Stewart, John

    2017-01-01

    In 1970 the medical associations of South Africa and Rhodesia (now, Zimbabwe) were expelled from the Commonwealth Medical Association. The latter had been set up, as the British Medical Commonwealth Medical Conference, in the late 1940s by the British Medical Association (BMA). These expulsions, and the events leading up to them, are the central focus of this article. The BMA’s original intention was to establish an organisation bringing together the medical associations of the constituent parts of the expanding Commonwealth. Among the new body’s preoccupations was the relationship between the medical profession and the state in the associations’ respective countries. It thus has to be seen as primarily a medico-political organisation rather than one concerned with medicine per se. Although, there were also tensions from the outset regarding the membership of the Southern African medical associations. Such stresses notwithstanding, these two organisations remained in the BMA-sponsored body even after South Africa and Rhodesia had left the Commonwealth. This was not, however, a situation which could outlast the growing number of African associations which joined in the wake of decolonisation; and hardening attitudes towards apartheid. The article therefore considers: why the BMA set up this Commonwealth body in the first place and what it hoped to achieve; the history of the problems associated with South African and Rhodesian membership; and how their associations came to be expelled. PMID:28901869

  19. The Expulsion of South Africa and Rhodesia from the Commonwealth Medical Association, 1947-70.

    Science.gov (United States)

    Stewart, John

    2017-10-01

    In 1970 the medical associations of South Africa and Rhodesia (now, Zimbabwe) were expelled from the Commonwealth Medical Association. The latter had been set up, as the British Medical Commonwealth Medical Conference, in the late 1940s by the British Medical Association (BMA). These expulsions, and the events leading up to them, are the central focus of this article. The BMA's original intention was to establish an organisation bringing together the medical associations of the constituent parts of the expanding Commonwealth. Among the new body's preoccupations was the relationship between the medical profession and the state in the associations' respective countries. It thus has to be seen as primarily a medico-political organisation rather than one concerned with medicine per se. Although, there were also tensions from the outset regarding the membership of the Southern African medical associations. Such stresses notwithstanding, these two organisations remained in the BMA-sponsored body even after South Africa and Rhodesia had left the Commonwealth. This was not, however, a situation which could outlast the growing number of African associations which joined in the wake of decolonisation; and hardening attitudes towards apartheid. The article therefore considers: why the BMA set up this Commonwealth body in the first place and what it hoped to achieve; the history of the problems associated with South African and Rhodesian membership; and how their associations came to be expelled.

  20. Single-Cell Biomolecular Analysis of Coral Algal Symbionts Reveals Opposing Metabolic Responses to Heat Stress and Expulsion

    Directory of Open Access Journals (Sweden)

    Katherina Petrou

    2018-03-01

    Full Text Available The success of corals in nutrient poor environments is largely attributed to the symbiosis between the cnidarian host and its intracellular alga. Warm water anomalies have been shown to destabilize this symbiosis, yet detailed analysis of the effect of temperature and expulsion on cell-specific carbon and nutrient allocation in the symbiont is limited. Here, we exposed colonies of the hard coral Acropora millepora to heat stress and using synchrotron-based infrared microspectroscopy measured the biomolecular profiles of individual in hospite and expelled symbiont cells at an acute state of bleaching. Our results showed symbiont metabolic profiles to be remarkably distinct with heat stress and expulsion, where the two effectors elicited opposing metabolic adjustments independent of treatment or cell type. Elevated temperature resulted in biomolecular changes reflecting cellular stress, with relative increases in free amino acids and phosphorylation of molecules and a concomitant decline in protein content, suggesting protein modification and degradation. This contrasted with the metabolic profiles of expelled symbionts, which showed relative decreases in free amino acids and phosphorylated molecules, but increases in proteins and lipids, suggesting expulsion lessens the overall effect of heat stress on the metabolic signature of the algal symbionts. Interestingly, the combined effects of expulsion and thermal stress were additive, reducing the overall shifts in all biomolecules, with the notable exception of the significant accumulation of lipids and saturated fatty acids. This first use of a single-cell metabolomics approach on the coral symbiosis provides novel insight into coral bleaching and emphasizes the importance of a single-cell approach to demark the cell-to-cell variability in the physiology of coral cellular populations.

  1. Microscopic modelling of air spring bellows. Automation in the lifetime estimation of air springs; Mikroskopische Balgmodellierung. Automatismen in der Lebensdauerabschaetzung von Luftfedern

    Energy Technology Data Exchange (ETDEWEB)

    Pham, Tram Anh; Brueger, Thorsten [Vibracoustic GmbH und Co. KG, Hamburg (Germany); Rambacher, Christoph [Professur fuer Maschinenelemente und Produktentwicklung (MRP), Helmut-Schmidt-Univ., Hamburg (HSU) (Germany)

    2009-07-01

    Because of the many advantages of air springs over conventional springs, they are being increasingly fitted in upper and middle class automobiles. Generally air spring bellows, consisting of reinforcing cords and elastomer, can be simulated using the rebar technique. The following article introduces a method in which the boundary conditions derived from the model simulated with the rebar technique are applied in the air spring bellow ''microscopic model'' which is modelled automatically. The microscopic modelling enables a detailed analysis of stress and strain conditions in the elastomer. With the automated process this method can be applied for the widespread design process for air spring systems. Finally the validation of the method is demonstrated. (orig.)

  2. CTD, water quality, and phytoplankton data from the R/V Bellows cruise BE-1322 in the Gulf of Mexico from 2013-06-02 to 2013-06-04 (NCEI Accession 0161217)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset contains conductivity, temperature, and depth data from R/V Bellows cruise BE-1322 of the offshore shelf of the Florida Panhandle Bight at the head of...

  3. CTD, water quality, and pigment data collected from R/V Bellows cruise BE-1317 in the Gulf of Mexico from 2013-04-06 to 2013-04-08 (NCEI Accession 0160919)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset reports conductivity, temperature, and depth data collected during R/V Bellows cruise BE-1317 of the offshore shelf of the Florida Panhandle Bight at...

  4. Conductivity, water temperature, Coccolith species counts, and others collected from R/V Bellows in Gulf of Mexico from 2011-10-24 to 2011-10-26 (NCEI Accession 0159274)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset reports conductivity, temperature, and depth data from R/V Bellows cruise BE-1205. This cruise took place from October 24-26, 2011 from the Florida...

  5. Take it or leave: a five-year prospective study of workplace bullying and indicators of expulsion in working life.

    Science.gov (United States)

    Glambek, Mats; Skogstad, Anders; Einarsen, Ståle

    2015-01-01

    Workplace bullying is often held as a precursor of expulsion in working life, but the claim builds on sparse empirical groundwork. In the present study, bullying is investigated as an antecedent to indicators of expulsion, be it from the workplace (change of employer) or from working life itself (disability benefit recipiency and unemployment), using a nationally representative sample (n=1,613), a five-year time-lag as well as two separate measures of workplace bullying. In line with the hypotheses, logistic regression analyses revealed that both exposure to bullying behaviors and self-labeled bullying are significantly associated with change of employer (OR=1.77 and 2.42, respectively) and disability benefit recipiency (OR=2.81 and 2.95, respectively). Moreover, exposure to bullying behaviors was found to be significantly related to unemployment five years on (OR=4.6). For the self-labeling measure of bullying, this tendency only held true at the 0.1 significance level (OR=3.69, p=0.098). Together, the present results indicate that targets of bullying are at a greater risk of expulsion, both from the workplace and from working life itself, thus representing strong incentives to combat bullying both from the perspective of the individual, the organization and society at large.

  6. Take it or leave: a five-year prospective study of workplace bullying and indicators of expulsion in working life

    Science.gov (United States)

    GLAMBEK, Mats; SKOGSTAD, Anders; EINARSEN, Ståle

    2014-01-01

    Workplace bullying is often held as a precursor of expulsion in working life, but the claim builds on sparse empirical groundwork. In the present study, bullying is investigated as an antecedent to indicators of expulsion, be it from the workplace (change of employer) or from working life itself (disability benefit recipiency and unemployment), using a nationally representative sample (n=1,613), a five-year time-lag as well as two separate measures of workplace bullying. In line with the hypotheses, logistic regression analyses revealed that both exposure to bullying behaviors and self-labeled bullying are significantly associated with change of employer (OR=1.77 and 2.42, respectively) and disability benefit recipiency (OR=2.81 and 2.95, respectively). Moreover, exposure to bullying behaviors was found to be significantly related to unemployment five years on (OR=4.6). For the self-labeling measure of bullying, this tendency only held true at the 0.1 significance level (OR=3.69, p=0.098). Together, the present results indicate that targets of bullying are at a greater risk of expulsion, both from the workplace and from working life itself, thus representing strong incentives to combat bullying both from the perspective of the individual, the organization and society at large. PMID:25475094

  7. Efficacy and Safety of Alfuzosin as Medical Expulsive Therapy for Ureteral Stones: A Systematic Review and Meta-Analysis.

    Directory of Open Access Journals (Sweden)

    Chenli Liu

    Full Text Available Alfuzosin has been widely used to treat benign prostatic hyperplasia and prostatitis, and is claimed to be a selective agent for the lower urinary tract with low incidence of adverse side-effects and hypotensive changes. Recently, several randomized controlled trials have reported using Alfuzosin as an expulsive therapy of ureteral stones. Tamsulosin, another alpha blocker, has also been used as an agent for the expulsive therapy for ureteral stones. It is unclear whether alfuzosin has similar efficacy as Tamsulosin in the management of ureteral stones.To perform a systematic review and analysis of literatures comparing Alfuzosin with Tamsulosin or standard conservative therapy for the treatment of ureteral stones less than 10 mm in diameter.A systematic literature review was performed in December 2014 using Pubmed, Embase, and the Cochrane library databases to identify relevant studies. All randomized and controlled trials were included. A subgroup analysis was performed comparing Alfuzosin with control therapy on the management of distal ureteral stones.Alfuzosin provided a significantly higher stone-free rate than the control treatments (RR: 1.85; 95% confidence interval [CI], 1.35-2.55; p<0.001, and a shorter stone expulsion time (Weighted mean difference [WMD]: -4.20 d, 95%CI, -6.19 to -2.21; p<0.001, but it has a higher complication rate (RR: 2.02; 95% CI, 1.30-3.15; p<0.01. When Alfuzosin was compared to Tamsulosin, there was no significant difference in terms of stone-free rate (RR: 0.90; 95% CI, 0.79-1.02; p = 0.09 as well as the stone expulsion time (WMD: 0.52 d, 95%CI, -1.61 to 2.64; p = 0.63. The adverse effects of Alfuzosin were similar to those of Tamsulosin (RR: 0.88; 95% CI, 0.61-1.26; p = 0.47.Alfuzosin is a safe and effective agent for the expulsive therapy of ureteral stones smaller than 10 mm in size. It is more effective than therapeutic regiment without alpha blocker. It is equivalent to Tamsulosin in its effectiveness and

  8. Efficacy and Safety of Tamsulosin in Medical Expulsive Therapy for Distal Ureteral Stones with Renal Colic: A Multicenter, Randomized, Double-blind, Placebo-controlled Trial.

    Science.gov (United States)

    Ye, Zhangqun; Zeng, Guohua; Yang, Huan; Tang, Kun; Zhang, Xiaochun; Li, Hong; Li, Weibing; Wu, Zhong; Chen, Lingwu; Chen, Xingfa; Liu, Xiankui; Deng, Yaoliang; Pan, Tiejun; Xing, Jinchun; Wang, Shusheng; Cheng, Yue; Gu, Xiaojian; Gao, Wenxi; Yang, Jianggen; Zhang, Yonghai; Mi, Qiwu; Qi, Lin; Li, Jiongming; Hu, Weilie; Liang, Peiyu; Sun, Zhaolin; Xu, Changbao; Long, Yongfu; Liao, Yongbin; Liu, Siping; Liu, Guoqing; Xu, Xun; He, Wei; Chen, Zhiqiang; Xu, Hua

    2017-11-12

    Recent large high-quality trials have questioned the clinical effectiveness of medical expulsive therapy using tamsulosin for ureteral stones. To evaluate the efficacy and safety of tamsulosin for distal ureteral stones compared with placebo. We conducted a double-blind, placebo-controlled study of 3296 patients with distal ureteral stones, across 30 centers, to evaluate the efficacy and safety of tamsulosin. Participants were randomly assigned (1:1) into tamsulosin (0.4mg) or placebo groups for 4 wk. The primary end point of analysis was the overall stone expulsion rate, defined as stone expulsion, confirmed by negative findings on computed tomography, over a 28-d surveillance period. Secondary end points included time to stone expulsion, use of analgesics, and incidence of adverse events. Among 3450 patients randomized between September 1, 2011, and August 31, 2013, 3296 (96%) were included in the primary analysis. Tamsulosin benefits from a higher stone expulsion rate than the placebo (86% vs 79%; ptamsulosin for the treatment of large distal ureteral stones (>5mm). Considering the secondary end points, tamsulosin-treated patients reported a shorter time to expulsion (ptamsulosin use benefits distal ureteral stones in facilitating stone passage and relieving renal colic. Subgroup analyses find that tamsulosin provides a superior expulsion rate for stones >5mm, but no effect for stones ≤5mm. In this report, we looked at the efficacy and safety of tamsulosin for the treatment of distal ureteral stones. We find that tamsulosin significantly facilitates the passage of distal ureteral stones and relieves renal colic. Copyright © 2017 European Association of Urology. Published by Elsevier B.V. All rights reserved.

  9. The Use of Medical Expulsive Therapy During Pregnancy: A Worldwide Perspective Among Experts.

    Science.gov (United States)

    Lloyd, Granville L; Lim, Amy; Hamoui, Nabeel; Nakada, Stephen Y; Kielb, Stephanie J

    2016-03-01

    Medical expulsive therapy (MET) is a pharmacologic approach thought to augment the spontaneous passage of ureteral calculi. The usage of MET pharmacologics for presumed ureteral calculi during pregnancy has not been studied and their safety and utility are unknown. We sought to characterize the worldwide usage of MET in the setting of pregnancy with presumed ureteral calculus (P-MET), as well as factors associated with physician use. Experts in stone management were specifically sought. A nine-question survey was delivered through society-administered e-mail. Questions gathered physician's worldwide region, degree of specialization in stone disease, practice type, interval since training, and willingness to use both MET and P-MET. We assessed drugs of choice in those using P-MET and reasons for avoidance in non-P-MET users. Finally, we assessed the impact of physician-perceived medicolegal risk on usage of P-MET. Five hundred sixty-five responses were recorded. Sixty-three percent were US-based practitioners and the remaining represented a worldwide distribution. Worldwide usage of MET was 97.6%, and tamsulosin was globally preferred by over 90% of urologists. P-MET was endorsed by only 44.3%. 23.6% of European practitioners used this strategy compared with 51.1% of US physicians. Time from training and practice type did not significantly interact with adoption of P-MET; experts were less likely to use P-MET. Physician nonuse of MET during pregnancy was adverse outcome related: 76.7% reported either the fear of legal risk (52.8%) or concerns about safety (23.9%). Respondents report impressive worldwide adoption of MET. P-MET is less trusted, and fears of legal risk and safety far outweigh questions about effectiveness. The effectiveness of drugs during pregnancy-induced ureteral dilation is unknown. Still, 44% of global respondents embrace usage of this drug strategy despite a paucity of evidence supporting either safety or effectiveness during pregnancy.

  10. Use of medical expulsive therapy in children: An assessment of nationwide practice patterns and outcomes

    Science.gov (United States)

    Ellison, Jonathan S.; Merguerian, Paul A.; Fu, Benjamin C.; Holt, Sarah K.; Lendvay, Thomas S.; Gore, John L.; Shnorhavorian, Margarett

    2018-01-01

    Summary Introduction Early data support the use of medical expulsive therapy (MET) in children. However, little is known regarding use or outcomes associated with MET outside of pediatric-specific practices. Using a national administrative dataset, we sought to characterize utilization patterns of MET as well as assess outcomes associated with MET exposure. Study design We interrogated the MarketScan Commercial Claims and Encounters database to identify children under the age of 18 presenting to the emergency department (ED) with any diagnosis of upper urinary tract calculi (UUTC, including renal and ureteral calculi). MET exposure was defined as having a prescription filled for a MET agent within 1 week of the ED encounter. Characteristics of children receiving MET were defined and outcomes compared between children with and without MET exposure. Results Of 1325 children included in the study, 13.2% received MET, including 15.4% of children with a diagnosis of “calculus of the ureter.” MET use increased significantly throughout the study period (p = 0.004), although only 30.4% of children considered potential MET candidates received MET in the final year of the study (2013). Among all patients, receipt of MET was associated with male gender, presence of comorbidity, provider-type (urologist), and year of diagnosis, although among those with a specific diagnosis of “calculus of the ureter,” only year of diagnosis remained a significant factor. Rates of unplanned physician visits and surgical interventions were similar between groups. Children receiving MET were more likely to receive follow-up imaging, although only 46% of children with ureteral calculi had appropriate follow-up imaging within 90 days, regardless of MET exposure. Odds ratios of factors and outcomes associated with MET exposure are shown in the Table. Discussion Although early data support safety and efficacy MET in children, nationwide use in children is low among potential candidates for

  11. Calculating the number of shock waves, expulsion time, and optimum stone parameters based on noncontrast computerized tomography characteristics.

    Science.gov (United States)

    Foda, Khaled; Abdeldaeim, Hussein; Youssif, Mohamed; Assem, Akram

    2013-11-01

    To define the parameters that accompanied a successful extracorporeal shock wave lithotripsy (ESWL), namely the number of shock waves (SWs), expulsion time (ET), mean stone density (MSD), and the skin-to-stone distance (SSD). A total of 368 patients diagnosed with renal calculi using noncontrast computerized tomography had their MSD, diameter, and SSD recorded. All patients were treated using a Siemens lithotripter. ESWL success meant a stone-free status or presence of residual fragments 934 HUs and SSD >99 mm. The required number of SWs and the expected ET can be anticipated. Copyright © 2013 Elsevier Inc. All rights reserved.

  12. Measurement of LHCD antenna position in Aditya tokamak

    International Nuclear Information System (INIS)

    Ambulkar, K K; Sharma, P K; Virani, C G; Parmar, P R; Thakur, A L; Kulkarni, S V

    2010-01-01

    To drive plasma current non-inductively in ADITYA tokamak, 120 kW pulsed Lower Hybrid Current Drive (LHCD) system at 3.7 GHz has been designed, fabricated and installed on ADITYA tokamak. In this system, the antenna consists of a grill structure, having two rows, each row comprising of four sub-waveguides. The coupling of LHCD power to the plasma strongly depends on the plasma density near the mouth of grill antenna. Thus the grill antenna has to be precisely positioned for efficient coupling. The movement of mechanical bellow, which contracts or expands up to 50mm, governs the movement of antenna. In order to monitor the position of the antenna precisely, the reference position of the antenna with respect to the machine/plasma position has to be accurately determined. Further a mechanical system or an electronic system to measure the relative movement of the antenna with respect to the reference position is also desired. Also due to poor accessibility inside the ADITYA machine, it is impossible to measure physically the reference position of the grill antenna with respect to machine wall, taken as reference position and hence an alternative method has to be adopted to establish these measurements reliably. In this paper we report the design and development of a mechanism, using which the antenna position measurements are made. It also describes a unique method employing which the measurements of the reference position of the antenna with respect to the inner edge of the tokamak wall is carried out, which otherwise was impossible due to poor accessibility and physical constraints. The position of the antenna is monitored using an electronic scale, which is developed and installed on the bellow. Once the reference position is derived, the linear potentiometer, attached to the bellow, measures the linear distance using position transmitter. The accuracy of measurement obtained in our setup is within +/- 0.5 % and the linearity, along with repeatability is excellent.

  13. Using maya chair during the expulsive phase of delivery and its relation to the lower incidence of episiotomy or perineal tears

    Directory of Open Access Journals (Sweden)

    Laura López Quirós

    2014-04-01

    Full Text Available The aims of this article is to present the results obtained from the development of a clinical question about using maya obstetric chair during the expulsive phase of delivery and its relation to the lower incidence of episiotomy and perineal tears. In traditional cultures, the women give birth naturally in vertical positions as kneeling, standing, among others. In Western societies, physicians have influenced women will deliver in the supine position, sometimes with legs raised using stirrups. For women of our country is difficult to adopt "alternative" positions that have traditionally been seen as 'normal'. The maya chair is used in the countries of South America, and it appears to be an effective way to prevent perineal tears and the lower incidence of episiotomy duringchildbirth. To carry out this secondary research methodology for clinical practice based on evidence that consists of five steps was used. A question was developed in PICO format (patient, intervention, comparison and observation, then an information search was performed in different databases like Ebsco Host, Google Scholar, PubMed, Medline plus, Embase. 30 articles were found, were analyzed according to the criteria set FCL version 2.0, of which only one was close to answering the clinical question. Information was socialized in a formalpresentation by CIEBE-CR. It is conclude that there is insufficient evidence that the use of maya chair during theexpulsive phase of delivery significantly reduces the risk of perianal tear and lower incidence of episiotomy.

  14. Correcting for respiratory motion in liver PET/MRI: preliminary evaluation of the utility of bellows and navigated hepatobiliary phase imaging

    International Nuclear Information System (INIS)

    Hope, Thomas A.; Verdin, Emily F.; Bergsland, Emily K.; Ohliger, Michael A.; Corvera, Carlos University; Nakakura, Eric K.

    2015-01-01

    The purpose of this study was to evaluate the utility of bellows-based respiratory compensation and navigated hepatobiliary phase imaging to correct for respiratory motion in the setting of dedicated liver PET/MRI. Institutional review board approval and informed consent were obtained. Six patients with metastatic neuroendocrine tumor were imaged using Ga-68 DOTA-TOC PET/MRI. Whole body imaging and a dedicated 15-min liver PET acquisition was performed, in addition to navigated and breath-held hepatobiliary phase (HBP) MRI. Liver PET data was reconstructed three ways: the entire data set (liver PET), gated using respiratory bellows (RC-liver PET), and a non-gated data set reconstructed using the same amount of data used in the RC-liver PET (shortened liver PET). Liver lesions were evaluated using SUV max , SUV peak , SUV mean , and Vol isocontour . Additionally, the displacement of each lesion between the RC-liver PET images and the navigated and breath-held HBP images was calculated. Respiratory compensation resulted in a 43 % increase in SUVs compared to ungated data (liver vs RC-liver PET SUV max 26.0 vs 37.3, p < 0.001) and a 25 % increase compared to a non-gated reconstruction using the same amount of data (RC-liver vs shortened liver PET SUV max 26.0 vs 32.6, p < 0.001). Lesion displacement was minimized using navigated HBP MRI (1.3 ± 1.0 mm) compared to breath-held HBP MRI (23.3 ± 1.0 mm). Respiratory bellows can provide accurate respiratory compensation when imaging liver lesions using PET/MRI, and results in increased SUVs due to a combination of increased image noise and reduced respiratory blurring. Additionally, navigated HBP MRI accurately aligns with respiratory compensated PET data.

  15. Correcting for respiratory motion in liver PET/MRI: preliminary evaluation of the utility of bellows and navigated hepatobiliary phase imaging

    Energy Technology Data Exchange (ETDEWEB)

    Hope, Thomas A. [Department of Radiology and Biomedical Imaging, University of California, San Francisco, San Francisco, CA (United States); Department of Radiology, San Francisco VA Medical Center, San Francisco, CA (United States); Verdin, Emily F. [Department of Radiology and Biomedical Imaging, University of California, San Francisco, San Francisco, CA (United States); Bergsland, Emily K. [Division of Hematology/Oncology, Department of Medicine, University of California, San Francisco, San Francisco, CA (United States); Ohliger, Michael A. [Department of Radiology and Biomedical Imaging, University of California, San Francisco, San Francisco, CA (United States); Department of Radiology, San Francisco General Hospital, San Francisco, CA (United States); Corvera, Carlos University; Nakakura, Eric K. [Division of Surgical Oncology, Department of Surgery, University of California, San Francisco, San Francisco, CA (United States)

    2015-09-18

    The purpose of this study was to evaluate the utility of bellows-based respiratory compensation and navigated hepatobiliary phase imaging to correct for respiratory motion in the setting of dedicated liver PET/MRI. Institutional review board approval and informed consent were obtained. Six patients with metastatic neuroendocrine tumor were imaged using Ga-68 DOTA-TOC PET/MRI. Whole body imaging and a dedicated 15-min liver PET acquisition was performed, in addition to navigated and breath-held hepatobiliary phase (HBP) MRI. Liver PET data was reconstructed three ways: the entire data set (liver PET), gated using respiratory bellows (RC-liver PET), and a non-gated data set reconstructed using the same amount of data used in the RC-liver PET (shortened liver PET). Liver lesions were evaluated using SUV{sub max}, SUV{sub peak}, SUV{sub mean}, and Vol{sub isocontour}. Additionally, the displacement of each lesion between the RC-liver PET images and the navigated and breath-held HBP images was calculated. Respiratory compensation resulted in a 43 % increase in SUVs compared to ungated data (liver vs RC-liver PET SUV{sub max} 26.0 vs 37.3, p < 0.001) and a 25 % increase compared to a non-gated reconstruction using the same amount of data (RC-liver vs shortened liver PET SUV{sub max} 26.0 vs 32.6, p < 0.001). Lesion displacement was minimized using navigated HBP MRI (1.3 ± 1.0 mm) compared to breath-held HBP MRI (23.3 ± 1.0 mm). Respiratory bellows can provide accurate respiratory compensation when imaging liver lesions using PET/MRI, and results in increased SUVs due to a combination of increased image noise and reduced respiratory blurring. Additionally, navigated HBP MRI accurately aligns with respiratory compensated PET data.

  16. Effect of estradiol and cloprostenol combination therapy on expulsion of mummified fetus and subsequent fertility in four crossbred cows

    Directory of Open Access Journals (Sweden)

    Arumugam Kumaresan

    2013-06-01

    Full Text Available Four crossbred cows with mummified fetus were utilized for the study. The cows weresubjected togynecologicalexamination and based on the findings the cases were diagnosed asmummified fetus. The cows were treated with 2 mg estradiol valerate and 500 μg cloprostenoland were examined every 12 hr after 24 hr of the treatment for cervical dilatation and othersigns related to fetal expulsion. The time duration between treatment and starting of cervicaldilatation ranged from 48 to 58h (53.00 ± 2.08 hr. Complete dilatation of cervix was observedafter 70.00 ± 2.94 hr post treatment (Range = 64-76 hr. The mean fetalcrown-rump length(CRL was 31.5 cm, which ranged from 27.5 to 38 cm. The number of cotyledons in pregnanthorn also showed wide variation (Range 24-38 numbers with mean ± SE of 30.3 ± 3.07numbers. In the placenta of three animals irregular shaped large adventitious cotyledons wereobserved in the inter-cotyledonary areas. Out of the four animals treated, three animals wereconceived within three estrous cycles and one animal had cystic ovary in the next cycle and wasnot conceived even after four cycles. It was concluded that the estradiolandprostaglandin F2α(PGF2αcombinationtherapy was effective for expulsion of mummified fetus in crossbred cowswithout affecting much on future fertility.

  17. Impaction and Prediction: Does Ureteral Wall Thickness Affect the Success of Medical Expulsive Therapy in Pediatric Ureteral Stones?

    Science.gov (United States)

    Tuerxun, Aierken; Batuer, Abudukahaer; Erturhan, Sakip; Eryildirim, Bilal; Camur, Emre; Sarica, Kemal

    2017-01-01

    The study aimed to evaluate the predictive value of ureteral wall thickness (UWT) and stone-related parameters for medical expulsive therapy (MET) success with an alpha blocker in pediatric upper ureteral stones. A total of 35 children receiving MET ureteral stones (Hounsfield unit), degree of hydronephrosis, and UWT were evaluated with patient demographics and recorded. The possible predictive value of these parameters in success rates and time to stone expulsion were evaluated in a comparative manner between the 2 groups. The overall mean patient age and stone size values were 5.40 ± 0.51 years and 6.24 ± 0.28 mm, respectively. Regarding the predictive values of these parameters for the success of MET, while stone size and UWT were found to be highly predictive for MET success, patients age, body mass index, stone density, and degree of hydronephrosis had no predictive value on this aspect. Our findings indicated that some stone and anatomical factors may be used to predict the success of MET in pediatric ureteral stones in an effective manner. With this approach, unnecessary use of these drugs that may cause a delay in removing the stone will be avoided, and the possible adverse effects of obstruction as well as stone-related clinical symptoms could be minimized. © 2017 S. Karger AG, Basel.

  18. Technical Evaluation Summary of the In Situ Vitrification Melt Expulsion at the Oak Ridge National Laboratory on April 21, 1996, Oak Ridge, Tennessee

    International Nuclear Information System (INIS)

    1996-11-01

    This Technical Evaluation Summary of the In Situ Vitrification Melt Expulsion at the Oak Ridge National Laboratory on April 21, 1996, was prepared at the request of the Department of Energy as a supporting reference document for the Final Unusual Occurrence Report to fully explore the probable causes that lead to the subject incident. This document provides the Environmental Restoration Program with the technical information on the performance of the in situ vitrification treatability study operations at ORNL pit 1 up to and including the time of the melt expulsion incident. This document also attempts to diagnose the causes of the melt expulsion event the consequent damages to equipment the radiological impacts of the event, and the equipment design modifications and procedural changes necessary for future safe ISV operations

  19. 饱和蒸汽压式波纹管疏水阀热动元件实验研究%Experimental study on the saturated vapor pressure type thermostatic bellows for steam traps

    Institute of Scientific and Technical Information of China (English)

    李树勋; 徐登伟; 把桥环

    2011-01-01

    针对液体膨胀式波纹管蒸汽疏水阀排量不稳定、漏汽率高等问题,分析波纹管热动元件的热工特性.基于Riedel蒸汽压方程和气液平衡方程,建立饱和蒸汽压式波纹管热动元件的热力学模型,设计相应实验系统,进行不同参数下的实验研究.结果表明,饱和蒸汽压式波纹管热动元件伸长量是相变温度的单值函数,近似呈指数关系;采用不同混合比、刚度及填充方式,可调节疏水阀的排水过冷度.%In view of the instabilities of displacement and high steam leakage rate for the liquid-expansion type ther-mostatic bellows steam traps, thermodynamic characteristical of thermostatic bellows was analyzed. Based on the Riedel equation and the vapor-liquid equilibrium equation, thermodynamic model of the saturated vapor pressure type thermostatic bellows was set up, corresponding experimental system was designed, and experimental studies with different parameters was carried out. The experimental results agree well with the theoretical analysis. The results show that the elongation A/I of the saturated vapor pressure type thermostatic bellows is monodrome function of phase transition temperature T, and relationship between the elongation A/I and the phase change temperature t is an exponential function. The subcooled temperature of steam trap can be adjusted by using different mixture ratio, different bellows' stiffness and different sufficient attire method. This paper establishes theoretical and experimental foundation for improving the performance of thermostatic bellows steam traps.

  20. Role of alpha-1 blocker in expulsion of stone fragments after extracorporeal shock wave lithotripsy for renal stones

    International Nuclear Information System (INIS)

    Pirzada, A.J.; Anwar, A.; Javed, A.; Memon, I.; Mohammad, A.

    2011-01-01

    Background: Renal stone disease is a significant and worldwide health problem. Recent advances in stone management have allowed kidney stones to be treated using extracorporeal shock wave lithotripsy (ESWL), uretero-renoscopy (URS), and percutaneous nephrostolithotomy (PCNL). Recently, medical expulsion therapy (MET) has been investigated as a supplement to observation in an effort to improve spontaneous stone passage rates. Patients and Methods: This study was a randomized, controlled, prospective study to determine whether the administration of Alpha-1-adrenergic receptor antagonists as an adjunctive medical therapy, increases the efficacy of ESWL to treat renal stones. Sixty patients with renal stones of 0.5-1.5 Cm in size (average size 1.2 Cm) were included in this study underwent ESWL followed by administration of Alpha-1-adrenergic receptor antagonists at department of Urology Liaquat National Hospital Karachi from Feb 2008 to Sept 2008. This was a comparative study and patients were divided into two groups. In group A patients received conventional treatment Diclofenac sodium, Anti Spasmodic (Drotaverine HCl) as required and Proton Pump inhibitor (Omeprazole 20 mg) once daily after shock wave lithotripsy. In group B patients received alpha-1 blocker, Alfuzosin HCl 5 mg twice daily in addition to conventional treatment. All patients were instructed to drink a minimum of 2 litres water daily. Ultrasound guided Dornier Alpha Impact Lithotripter was utilised for shock wave lithotripsy. Results: Of the 60 patients, 76.7% of those receiving Alfuzosin and 46.7% of controls had achieved clinical success at 1 month (p=0.01). The mean cumulative diclofenac dose was 485 mg per patient in the Alfuzosin group and 768 mg per patient in the control group (p=0.002). This difference was statistically significant. Conclusion: Alfuzosin therapy as an adjunctive medical therapy after ESWL is more effective than lithotripsy alone for the treatment of patients with large renal

  1. MIGRATION AND CHINESE ENTREPRENEURS IN MAZATLAN. SINCE ARRIVING IN MID- NINETEENTH CENTURY UNTIL THEIR EXPULSION IN 1930

    Directory of Open Access Journals (Sweden)

    R. Arturo Román Alarcón

    2014-07-01

    Full Text Available The Chinese migration to Mazatlan and Mexico, began in the mid-nineteenth century, via San Francisco. They were the most important foreign colony from the early decades of the twentieth century. On arrival the Chinese population lacked capital as largely devoted to provide their services as domestic workers, especially farmers and craft activities related to repairing and making shoes. With the advent of the twentieth century and the accumulation of some capital, began its foray into the retail trade, which was the domain of national merchants. The commercial importance of the Chinese was one of the causes of the hostility of Mexican traders, which coupled with the counter-arguments raised by the Labor Law, Health Code, the culmination of the Treaty with China and the effects of the 1929 crisis, served as sustenance for their expulsion in 1932.

  2. The counterfeit nephew of the Pope. A plot against the Bishop of Puebla during the expulsion of the Jesuits

    Directory of Open Access Journals (Sweden)

    Gabriel Torres Puga

    2016-01-01

    Full Text Available In 1767, an ex-Jesuit and an Italian adventurer met in the Episcopal jail in Puebla. The grievances of the former, a staunch critic of Bishop Francisco Fabián y Fuero, found a means of expression in the illusions of the latter, who pretended to be the Pope’s nephew. The result was a strange plan that took on a “seditious” character as it combined with the gossip surrounding the expulsion of the Jesuits. This article uses a variety of legal documents and secret investigations to reconstruct this history of lies, intrigue and the desire for critical expression, providing an opportunity to reflect on the dissent of the American clergy during a time in which royalty and censorship were being redefined.

  3. Seabed fluid expulsion along the upper slope and outer shelf of the U.S. Atlantic continental margin

    Science.gov (United States)

    Brothers, D.S.; Ruppel, C.; Kluesner, J.W.; ten Brink, Uri S.; Chaytor, J.D.; Hill, J.C.; Andrews, B.D.; Flores, C.

    2014-01-01

    Identifying the spatial distribution of seabed fluid expulsion features is crucial for understanding the substrate plumbing system of any continental margin. A 1100 km stretch of the U.S. Atlantic margin contains more than 5000 pockmarks at water depths of 120 m (shelf edge) to 700 m (upper slope), mostly updip of the contemporary gas hydrate stability zone (GHSZ). Advanced attribute analyses of high-resolution multichannel seismic reflection data reveal gas-charged sediment and probable fluid chimneys beneath pockmark fields. A series of enhanced reflectors, inferred to represent hydrate-bearing sediments, occur within the GHSZ. Differential sediment loading at the shelf edge and warming-induced gas hydrate dissociation along the upper slope are the proposed mechanisms that led to transient changes in substrate pore fluid overpressure, vertical fluid/gas migration, and pockmark formation.

  4. Conductivity, water temperature, coccolith species, and others collected from R/V Bellows in Gulf of Mexico from 2011-09-29 to 2011-10-01 (NCEI Accession 0159233)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset contains conductivity, temperature and depth data R/V Bellows cruise BE-1204 in the DeSoto Canyon from September 29th to October 1st 2011. Census data...

  5. FINITE ELEMENT DISPLACEMENT PERTURBATION METHOD FOR GEOMETRIC NONLINEAR BEHAVIORS OF SHELLS OF REVOLUTION OVERALL BENDING IN A MERIDIONAL PLANE AND APPLICATION TO BELLOWS (Ⅰ)

    Institute of Scientific and Technical Information of China (English)

    朱卫平; 黄黔

    2002-01-01

    In order to analyze bellows effectively and practically, the finite-element-displacement-perturbation method (FEDPM) is proposed for the geometric nonlinearbehaviors of shells of revolution subjected to pure bending moments or lateral forces in one of their meridional planes. The formulations are mainly based upon the idea of perturba-tion that the nodal displacement vector and the nodal force vector of each finite elementare expanded by taking root-mean-square value of circumferential strains of the shells as aperturbation parameter. The load steps and the iteration times are not cs arbitrary andunpredictable as in usual nonlinear analysis. Instead, there are certain relations betweenthe load steps and the displacement increments, and no need of iteration for each loadstep. Besides, in the formulations, the shell is idealized into a series of conical frusta for the convenience of practice, Sander' s nonlinear geometric equations of moderate smallrotation are used, and the shell made of more than one material ply is also considered.

  6. Effects of smectite on the oil-expulsion efficiency of the Kreyenhagen Shale, San Joaquin Basin, California, based on hydrous-pyrolysis experiments

    Science.gov (United States)

    Lewan, Michael D.; Dolan, Michael P.; Curtis, John B.

    2014-01-01

    The amount of oil that maturing source rocks expel is expressed as their expulsion efficiency, which is usually stated in milligrams of expelled oil per gram of original total organic carbon (TOCO). Oil-expulsion efficiency can be determined by heating thermally immature source rocks in the presence of liquid water (i.e., hydrous pyrolysis) at temperatures between 350°C and 365°C for 72 hr. This pyrolysis method generates oil that is compositionally similar to natural crude oil and expels it by processes operative in the subsurface. Consequently, hydrous pyrolysis provides a means to determine oil-expulsion efficiencies and the rock properties that influence them. Smectite in source rocks has previously been considered to promote oil generation and expulsion and is the focus of this hydrous-pyrolysis study involving a representative sample of smectite-rich source rock from the Eocene Kreyenhagen Shale in the San Joaquin Basin of California. Smectite is the major clay mineral (31 wt. %) in this thermally immature sample, which contains 9.4 wt. % total organic carbon (TOC) comprised of type II kerogen. Compared to other immature source rocks that lack smectite as their major clay mineral, the expulsion efficiency of the Kreyenhagen Shale was significantly lower. The expulsion efficiency of the Kreyenhagen whole rock was reduced 88% compared to that of its isolated kerogen. This significant reduction is attributed to bitumen impregnating the smectite interlayers in addition to the rock matrix. Within the interlayers, much of the bitumen is converted to pyrobitumen through crosslinking instead of oil through thermal cracking. As a result, smectite does not promote oil generation but inhibits it. Bitumen impregnation of the rock matrix and smectite interlayers results in the rock pore system changing from water wet to bitumen wet. This change prevents potassium ion (K+) transfer and dissolution and precipitation reactions needed for the conversion of smectite to

  7. The Path to High Q-Factors in Superconducting Accelerating Cavities: Flux Expulsion and Surface Resistance Optimization

    Energy Technology Data Exchange (ETDEWEB)

    Martinello, Martina [Illinois Inst. of Technology, Chicago, IL (United States)

    2016-12-01

    Accelerating cavities are devices resonating in the radio-frequency (RF) range used to accelerate charged particles in accelerators. Superconducting accelerating cavities are made out of niobium and operate at the liquid helium temperature. Even if superconducting, these resonating structures have some RF driven surface resistance that causes power dissipation. In order to decrease as much as possible the power losses, the cavity quality factor must be increased by decreasing the surface resistance. In this dissertation, the RF surface resistance is analyzed for a large variety of cavities made with different state-of-the-art surface treatments, with the goal of finding the surface treatment capable to return the highest Q-factor values in a cryomodule-like environment. This study analyzes not only the superconducting properties described by the BCS surface resistance, which is the contribution that takes into account dissipation due to quasi-particle excitations, but also the increasing of the surface resistance due to trapped flux. When cavities are cooled down below their critical temperature inside a cryomodule, there is always some remnant magnetic field that may be trapped increasing the global RF surface resistance. This thesis also analyzes how the fraction of external magnetic field, which is actually trapped in the cavity during the cooldown, can be minimized. This study is performed on an elliptical single-cell horizontally cooled cavity, resembling the geometry of cavities cooled in accelerator cryomodules. The horizontal cooldown study reveals that, as in case of the vertical cooldown, when the cooling is performed fast, large thermal gradients are created along the cavity helping magnetic flux expulsion. However, for this geometry the complete magnetic flux expulsion from the cavity equator is more difficult to achieve. This becomes even more challenging in presence of orthogonal magnetic field, that is easily trapped on top of the cavity equator

  8. The path to high Q-factors in superconducting accelerating cavities: Flux expulsion and surface resistance optimization

    Science.gov (United States)

    Martinello, Martina

    Accelerating cavities are devices resonating in the radio-frequency (RF) range used to accelerate charged particles in accelerators. Superconducting accelerating cavities are made out of niobium and operate at the liquid helium temperature. Even if superconducting, these resonating structures have some RF driven surface resistance that causes power dissipation. In order to decrease as much as possible the power losses, the cavity quality factor must be increased by decreasing the surface resistance. In this dissertation, the RF surface resistance is analyzed for a large variety of cavities made with different state-of-the-art surface treatments, with the goal of finding the surface treatment capable to return the highest Q-factor values in a cryomodule-like environment. This study analyzes not only the superconducting properties described by the BCS surface resistance, which is the contribution that takes into account dissipation due to quasi-particle excitations, but also the increasing of the surface resistance due to trapped flux. When cavities are cooled down below their critical temperature inside a cryomodule, there is always some remnant magnetic field that may be trapped increasing the global RF surface resistance. This thesis also analyzes how the fraction of external magnetic field, which is actually trapped in the cavity during the cooldown, can be minimized. This study is performed on an elliptical single-cell horizontally cooled cavity, resembling the geometry of cavities cooled in accelerator cryomodules. The horizontal cooldown study reveals that, as in case of the vertical cooldown, when the cooling is performed fast, large thermal gradients are created along the cavity helping magnetic flux expulsion. However, for this geometry the complete magnetic flux expulsion from the cavity equator is more difficult to achieve. This becomes even more challenging in presence of orthogonal magnetic field, that is easily trapped on top of the cavity equator

  9. The Expulsion from Disneyland: The Social Psychological Impact of 9/11

    Science.gov (United States)

    Morgan, G. Scott; Wisneski, Daniel C.; Skitka, Linda J.

    2011-01-01

    People expressed many different reactions to the events of September 11th, 2001. Some of these reactions were clearly negative, such as political intolerance, discrimination, and hate crimes directed toward targets that some, if not many, people associated with the attackers. Other reactions were more positive. For example, people responded by…

  10. Complete Expulsion of Testicular Prosthesis via the Scrotum: A Case-Based Review of the Preventive Surgical Strategies

    Directory of Open Access Journals (Sweden)

    Jack Donati-Bourne

    2015-01-01

    Full Text Available Testicular prostheses are regularly used in urological surgery and are important for postoperative psychological well-being in many patients undergoing orchiectomy. One of the recognised complications of this procedure is graft extrusion, which can result in significant morbidity for patients and require operative reintervention. Whilst most cases of extrusion involve upward graft migration to the external inguinal ring or direct displacement through the scrotal skin, we present an unusual case of complete expulsion of testicular implant three weeks postoperatively through a previously healthy scrotum. During surgical insertion of testicular prostheses, the urological surgeon must carefully consider the different surgical strategies at each step of the operation to prevent future extrusion of the graft. A stepwise review of the preventive surgical strategies to reduce the risk of graft extrusion encompasses the choice of optimal surgical incision, the technique of dissection to create the receiving anatomical pouch, the method of fixation of the implant within the receiving hemiscrotum, and the adoption of good postoperative care measures in line with the principles of sound scrotal surgery.

  11. Gas expulsions and biological activity recorded offshore Molene Island, Brittany (France): video supervised recording of OBS data and analogue modelling

    Science.gov (United States)

    Klingelhoefer, F.; Géli, L.; Dellong, D.; Evangelia, B.; Tary, J. B.; Bayrakci, G.; Lantéri, N.; Lin, J. Y.; Chen, Y. F.; Chang, E. T. Y.

    2016-12-01

    Ocean bottom seismometers (OBS) commonly record signals from Short Duration Events (SDEs), having characteristics that are very different from those produced by tectonic earthquakes, e.g.: durations Brittany within the field of view of the EMSO-Molene underwater observatory, at a water depth of 12 m. The camera images and the recordings reveal the presence of crabs, octopus and several species of fish. Other acoustic signals can be related to the presence of moving algae or the influence from bad weather. Tides produce characteristic curves in the noise recorded on the geophones. SDEs have been recorded on both instruments, that may well have been caused by gas expulsions from the seabed into the water. In order to verify this hypothesis, an aquarium was filled with water overlying an even grain-sized quartz sand layer. A constant air supply through a narrow tube produced gas bubbles in a regular manner and an immersed ocean bottom geophone recorded the resulting acoustic signals. The bubbles tend to have a uniform size and to produce a waveform very close to those found on the OBSs. By comparing the number of SDEs and the volume of escaped air, estimates can be made regarding the volume of gas escaping the seafloor in different environments.

  12. Technical evaluation of the in situ vitrification melt expulsion at the Oak Ridge National Laboratory on April 21, 1996, Oak Ridge, Tennessee

    International Nuclear Information System (INIS)

    1996-08-01

    On April 21, 1996, at 6:12 p.m., approximately 20 tons of molten glass were expelled from a 216-ton body of molten (approximately 1600 degrees C) radioactively contaminated soil (containing 2.4 Ci of 137 Cs) at a field site at the Oak Ridge National Laboratory in Oak Ridge, Tennessee. The melt expulsion was caused by pressurized steam venting rapidly through, rather than by the desired path around, the molten body. During the previous 17 days, an old seepage pit was undergoing in situ vitrification (ISV) to convert it from porous, leachable soil into a monolithic, impermeable vitreous waste form. Approximately 2 MW of electrical power was being delivered to the molten body, which was contained in the ground and covered with a stainless steel hood maintained under negative pressure to collect, filter, scrub, and monitor off-gas. Off-gas into the hood was rapidly heated by the melt expulsion from a typical operating temperature of 250 degrees C to over 1000 degrees C with an associated surge of pressure sufficient to lift the 15,000-lb hood approximately 12 in. off the ground. A small pool of molten glass was able to flow up to 3 ft outside the hood while it was raised off the ground. The escaping hot off-gas and molten glass ignited several small fires in combustible components near or attached to the external hood frame (e.g, wire insulation, plastic hose, fiberglass trays). Fire department personnel responded to the emergency notification within minutes but were not needed because the small fires self-extinguished within an hour. Four project personnel were performing tasks at the site at the time of the melt expulsion; none were injured or contaminated during the melt expulsion incident. Air samples taken from the hood perimeter near the small fires failed to detect any airborne contamination

  13. Left ventricle function in patients with ischemic cardiopathy: determination of the expulsion fraction of the left ventricle with gated-SPECT. Experience in the CMN 20 de Noviembre ISSSTE

    International Nuclear Information System (INIS)

    Mendoza, L.; Puente, A.; Hernandez, T.; Jimenez, L.

    2007-01-01

    The objective of this work is to correlate the expulsion fraction of the left ventricle (FEVI) obtained by means of g-SPECT and other diagnostic methods: ECO 2D and ventriculography for heart catheterization (CTT). (Author)

  14. When to stop pushing: effects of duration of second-stage expulsion efforts on maternal and neonatal outcomes in nulliparous women with epidural analgesia.

    Science.gov (United States)

    Le Ray, Camille; Audibert, François; Goffinet, François; Fraser, William

    2009-10-01

    The purpose of this study was to assess the influence of the duration of active second-stage labor on maternal and neonatal outcomes. Secondary analysis of the Pushing Early Or Pushing Late with Epidural trial that included 1862 nulliparous women with epidural analgesia who were in the second stage of labor. According to duration of active second-stage labor, we estimated the proportion of spontaneous vaginal deliveries (SVD) with a newborn infant without signs of asphyxia (5-minute Apgar score > or =7 and arterial pH >7.10). We also analyzed maternal and neonatal outcomes according to the duration of expulsive efforts. Relative to the first hour of expulsive efforts, the chances of a SVD of a newborn infant without signs of asphyxia decreased significantly every hour (1- to 2-hour adjusted odds ratio, 0.4; 95% confidence interval [CI], 0.3-0.6; 2- to 3-hour adjusted odds ratio, 0.1; 95% CI, 0.09-0.2; >3-hour adjusted odds ratio, 0.03; 95% CI, 0.02-0.05). The risk of postpartum hemorrhage and intrapartum fever increased significantly after 2 hours of pushing. Faced with a decreasing probability of SVD and increased maternal risk of morbidity after 2 hours, we raise the question as to whether expulsive efforts should be continued after this time.

  15. Heating of a fully saturated darcian half-space: Pressure generation, fluid expulsion, and phase change

    Science.gov (United States)

    Delaney, P.

    1984-01-01

    Analytical solutions are developed for the pressurization, expansion, and flow of one- and two-phase liquids during heating of fully saturated and hydraulically open Darcian half-spaces subjected to a step rise in temperature at its surface. For silicate materials, advective transfer is commonly unimportant in the liquid region; this is not always the case in the vapor region. Volume change is commonly more important than heat of vaporization in determining the position of the liquid-vapor interface, assuring that the temperatures cannot be determined independently of pressures. Pressure increases reach a maximum near the leading edge of the thermal front and penetrate well into the isothermal region of the body. Mass flux is insensitive to the hydraulic properties of the half-space. ?? 1984.

  16. 2D compositional modeling of petroleum generation, expulsion and migration in the Southern compartment of the Reconcavo Basin, Brazil; Modelisation compositionnelle 2D de la genese, expulsion et migration du petrole dans le compartiment sud du Bassin de Reconcavo, Bresil

    Energy Technology Data Exchange (ETDEWEB)

    Barroz Penteado, H.L. de

    1999-01-07

    The Reconcavo Basin is part of a rift formed between the Late Jurassic and the Early Cretaceous in northeastern Brazil. The objective of this thesis was the compositional modeling of petroleum generation, expulsion and migration along a cross-section in the Southern Compartment of the basin with the Temispack basin simulation software. A geochemical study of the lacustrine shales of the Gomo Member (Candelas Fm.) has been performed to determine their petroleum potential, the evolution of maturation with depth and changes in petroleum composition. Hydrogen indices of immature kerogens (400-850 mg/g TOC) were shown to be higher than those of whole rocks, thus indicating a retention of Rock-Eval pyrolysis products in the mineral matrix of these type I source rocks. Saturates (30-50% of organic extracts in the immature zone) increase both in absolute and in relative (60-80%) terms in the oil window (2000-2600 m) because of a partial secondary cracking of NSOs and aromatics. After having tested several scenarios of geodynamic evolution between the Aptian and the Oligocene, a variable thickness of post-rift sediments (maximum of 1200 m) has been shown to be necessary to calibrate maturity parameters. Petroleum migration has been modeled to understand migration pathways as well as the role of faults as drains. Thus, two petroleum migration systems have been identified for the Dom Joao and Cexis accumulations. Petroleum compositional variations have been modeled by coupling the processes of retention and secondary cracking. A good calibration of compositions was obtained with secondary cracking parameters for NSOs and aromatics which are close to those of the main primary cracking reaction of a type I kerogen, coupled with a retention of 50% of NSOs within the source rocks. (author)

  17. Terapia Expulsiva Medicamentosa na Litíase Ureteral: Revisão de Literatura/ Medicamental Expulsive Therapy in Ureteral Lithiasis: Literature Review

    Directory of Open Access Journals (Sweden)

    Kenji Maeda Missima

    2014-06-01

    Full Text Available A terapia expulsiva medicamentosa na litíase ureteral tem ganhado importante espaço na prática clínica, visto que é um método não invasivo e de grande eficácia. Como se trata de uma afecção comum, de alta incidência e custo, a terapia expulsiva possibilita um manejo clínico menos dispendioso e invasivo, quando comparada a procedimentos intervencionistas. Há consenso na literatura que a terapia expulsiva medicamentosa é efetiva e deve ser utilizada em cálculos com cerca de 5 milímetros de diâmetro, visto que as drogas utilizadas aumentam a taxa e diminuem o tempo de expulsão, além de diminuir a dor e o número de internações. O tamanho e localização do cálculo são de extrema relevância para que se possa considerar o manejo conservador. As drogas que obtém as melhores taxas expulsivas são os bloqueadores dos receptores alfa-adrenérgicos e os bloqueadores dos canais de cálcio. Analgésicos também são utilizados para o alívio da dor e o uso de corticoides ainda é questionado. Medicamental expulsive therapy for ureteral stones has gained important place in clinical practice, because it is a noninvasive and highly effective method. As it is a common disorder with high incidence and cost, expulsive therapy provides a less costly and invasive clinical management when compared to interventional procedures. There is a consensus that the medicamental expulsive therapy is effective and should be used in calculations with about 5 millimeters in diameter, since the drugs used increase rate and decrease the time of expulsion, in addition to reducing the pain and the number of hospitalizations. The size and location of the calculi are very important for it to be considered conservative management. The drugs that get the best expulsive rates are alpha - adrenergic receptor blockers and calcium channel blockers. Analgesics are also used for pain relief and the use of corticosteroids is still questioned.

  18. [The Expulsion of the Jesuits (1767) and its impact on Chilean medicine in colonial times].

    Science.gov (United States)

    Cruz-Coke, R

    1992-09-01

    In the mid XVIII century medical education was started in Chile with the foundation of the University of San Felipe. However, King Charles the Third expelled the Jesuits from the Spanish Empire in 1767 resulting in clear deterioration of medical development. Jesuits concentrated the cultural elite of the country and had the best professionals and libraries. A restrictive intervention from the Spanish government led to the establishment of a "Protomedicato" whose first director was Dr Jose Antonio Rios who remained in office for 40 years. At the end of the Colonial period, only 4 latin physicians and 3 bachelors in Medicine had graduated from the Universidad San Felipe, from an initial enrollment of 38 students in half a century. Only 5 among 25 doctors practicing in Chile in the first half on the XIXth century had been born in this country. This shortage was a severe handicap in the fight against smallpox and other plagues. Only the foundation of 2 hospitals (San Borja and Valparaíso) can be mentioned as positive actions coming from the Spanish government, and this was possible by using funds confiscated from the Jesuits. It was only after the establishment of the Republic and the foundation of the University of Chile, that medical development could again flourish in this country.

  19. Investigation of positive shaft seals

    Science.gov (United States)

    Pfouts, J. O.

    1970-01-01

    Welded metal bellows secondary seals prevent secondary seal leakage with a minimum number of potential leak paths. High performance seal is obtained by controlling the potentially unstable seal-face movements induced by mechanical vibrations and fluid pressure pulsations.

  20. Surgically Implanted JSATS Micro-Acoustic Transmitters Effects on Juvenile Chinook Salmon and Steelhead Tag Expulsion and Survival, 2010

    Energy Technology Data Exchange (ETDEWEB)

    Woodley, Christa M.; Carpenter, Scott M.; Carter, Kathleen M.; Wagner, Katie A.; Royer, Ida M.; Knox, Kasey M.; Kim, Jin A.; Gay, Marybeth E.; Weiland, Mark A.; Brown, Richard S.

    2011-09-16

    The purpose of this study was to evaluate survival model assumptions associated with a concurrent study - Acoustic Telemetry Evaluation of Dam Passage Survival and Associated Metrics at John Day, The Dalles, and Bonneville Dams, 2010 by Thomas Carlson and others in 2010 - in which the Juvenile Salmonid Acoustic Telemetry System (JSATS) was used to estimate the survival of yearling and subyearling Chinook salmon (Oncorhynchus tshawytscha) and steelhead (O. mykiss) migrating through the Federal Columbia River Power System (FCRPS). The micro-acoustic transmitter used in these studies is the smallest acoustic transmitter model to date (12 mm long x 5 mm wide x 4 mm high, and weighing 0.43 g in air). This study and the 2010 study by Carlson and others were conducted by researchers from the Pacific Northwest National Laboratory and the University of Washington for the U.S. Army Corps of Engineers, Portland District, to meet requirements set forth by the 2008 FCRPS Biological Opinion. In 2010, we compared survival, tag burden, and tag expulsion in five spring groups of yearling Chinook salmon (YCH) and steelhead (STH) and five summer groups of subyearling Chinook salmon (SYC) to evaluate survival model assumptions described in the concurrent study. Each tagging group consisted of approximately 120 fish/species, which were collected and implanted on a weekly basis, yielding approximately 600 fish total/species. YCH and STH were collected and implanted from late April to late May (5 weeks) and SYC were collected and implanted from mid-June to mid-July (5 weeks) at the John Day Dam Smolt Monitoring Facility. The fish were collected once a week, separated by species, and assigned to one of three treatment groups: (1) Control (no surgical treatment), (2) Sham (surgical implantation of only a passive integrated transponder [PIT] tag), and (3) Tagged (surgical implantation of JSATS micro-acoustic transmitter [AT] and PIT tags). The test fish were held for 30 days in indoor

  1. Temperature-dependent kinetics of charge transfer, hydrogen-atom transfer, and hydrogen-atom expulsion in the reaction of CO+ with CH4 and CD4.

    Science.gov (United States)

    Melko, Joshua J; Ard, Shaun G; Johnson, Ryan S; Shuman, Nicholas S; Guo, Hua; Viggiano, Albert A

    2014-09-18

    We have determined the rate constants and branching ratios for the reactions of CO(+) with CH4 and CD4 in a variable-temperature selected ion flow tube. We find that the rate constants are collisional for all temperatures measured (193-700 K for CH4 and 193-500 K for CD4). For the CH4 reaction, three product channels are identified, which include charge transfer (CH4(+) + CO), H-atom transfer (HCO(+) + CH3), and H-atom expulsion (CH3CO(+) + H). H-atom transfer is slightly preferred to charge transfer at low temperature, with the charge-transfer product increasing in contribution as the temperature is increased (H-atom expulsion is a minor product for all temperatures). Analogous products are identified for the CD4 reaction. Density functional calculations on the CO(+) + CH4 reaction were also conducted, revealing that the relative temperature dependences of the charge-transfer and H-atom transfer pathways are consistent with an initial charge transfer followed by proton transfer.

  2. Expulsion d’etrangers et Convention européenne des droits de l’homme Le risque de mauvais traitements dans l’Etat de destinatio

    Directory of Open Access Journals (Sweden)

    Syméon Karagiannis

    2010-12-01

    Full Text Available The right of States, for a variety of reasons, to expel aliens hasnever been disputed by the European Court of Human Rights insofar as aState party to the European Convention on Human Rights continues, quite naturally, to exercise its sovereignty over its territory. However, this right has to be reconciled with the obligation of States parties to the European Convention on Human Rights not to expose aliens and, more generally, persons under their jurisdictionto a risk of violation of the provisions of the Convention. Yet, guaranteeing that no human right recognized as such by the Convention be violated in case of expulsion is too heavy a task for States to assume. Imposing such an obligation would end up in invalidatingthe sovereign right of States to expel aliens. The Court ofStrasbourg retains primarily the risk of Article 3 of the Convention being violated in expulsion cases, a provision according to which inhuman or degrading punishments or treatments and, of course, acts of torture are strictly prohibited. The Court’s case-law, abundant aswell as rich in nuances, results in rather a thorough examination of the human rights situation in any country towards which a alien will be (or has already been expelled.

  3. Inducible deletion of CD28 prior to secondary nippostrongylus brasiliensis infection impairs worm expulsion and recall of protective memory CD4⁺ T cell responses.

    Directory of Open Access Journals (Sweden)

    Hlumani Ndlovu

    2014-02-01

    Full Text Available IL-13 driven Th2 immunity is indispensable for host protection against infection with the gastrointestinal nematode Nippostronglus brasiliensis. Disruption of CD28 mediated costimulation impairs development of adequate Th2 immunity, showing an importance for CD28 during the initiation of an immune response against this pathogen. In this study, we used global CD28⁻/⁻ mice and a recently established mouse model that allows for inducible deletion of the cd28 gene by oral administration of tamoxifen (CD28(-/loxCre⁺/⁻+TM to resolve the controversy surrounding the requirement of CD28 costimulation for recall of protective memory responses against pathogenic infections. Following primary infection with N. brasiliensis, CD28⁻/⁻ mice had delayed expulsion of adult worms in the small intestine compared to wild-type C57BL/6 mice that cleared the infection by day 9 post-infection. Delayed expulsion was associated with reduced production of IL-13 and reduced serum levels of antigen specific IgG1 and total IgE. Interestingly, abrogation of CD28 costimulation in CD28(-/loxCre⁺/⁻ mice by oral administration of tamoxifen prior to secondary infection with N. brasiliensis resulted in impaired worm expulsion, similarly to infected CD28⁻/⁻ mice. This was associated with reduced production of the Th2 cytokines IL-13 and IL-4, diminished serum titres of antigen specific IgG1 and total IgE and a reduced CXCR5⁺ T(FH cell population. Furthermore, total number of CD4⁺ T cells and B220⁺ B cells secreting Th1 and Th2 cytokines were significantly reduced in CD28⁻/⁻ mice and tamoxifen treated CD28(-/loxCre⁺/⁻ mice compared to C57BL/6 mice. Importantly, interfering with CD28 costimulatory signalling before re-infection impaired the recruitment and/or expansion of central and effector memory CD4⁺ T cells and follicular B cells to the draining lymph node of tamoxifen treated CD28(-/loxCre⁺/⁻ mice. Therefore, it can be concluded that CD28

  4. Dynamics of a bright soliton in Bose-Einstein condensates with time-dependent atomic scattering length in an expulsive parabolic potential

    International Nuclear Information System (INIS)

    Liang, Z.X.; Zhang, Z.D.; Liu, W.M.

    2005-01-01

    We present a family of exact solutions of the one-dimensional nonlinear Schroedinger equation which describes the dynamics of a bright soliton in Bose-Einstein condensates with the time-dependent interatomic interaction in an expulsive parabolic potential. Our results show that, under a safe range of parameters, the bright soliton can be compressed into very high local matter densities by increasing the absolute value of the atomic scattering length, which can provide an experimental tool for investigating the range of validity of the one-dimensional Gross-Pitaevskii equation. We also find that the number of atoms in the bright soliton keeps dynamic stability: a time-periodic atomic exchange is formed between the bright soliton and the background

  5. Giant seafloor craters formed by hydrate-controlled large-scale methane expulsion from the Arctic seafloor after ice sheet retreat

    Science.gov (United States)

    Andreassen, K.; Hubbard, A.; Patton, H.; Vadakkepuliyambatta, S.; Winsborrow, M.; Plaza-Faverola, A. A.; Serov, P.

    2017-12-01

    Large-scale methane releases from thawing Arctic gas hydrates is a major concern, yet the processes and fluxes involved remain elusive. We present geophysical data indicating two contrasting processes of natural methane emissions from the seafloor of the northern Barents Sea, Polar North Atlantic. Abundant gas flares, acoustically imaged in the water column reveal slow, gradual release of methane bubbles, a process that is commonly documented from nearby areas, elsewhere in the Arctic and along continental margins worldwide. Conversely, giant craters across the study area indicate a very different process. We propose that these are blow-out craters, formed through large-scale, abrupt methane expulsion induced when gas hydrates destabilized after the Barents Sea Ice Sheet retreated from the area. The data reveal over 100 giant seafloor craters within an area of 440 km2. These are up to 1000 m in diameter, 30 m deep and with a semi-circular to elliptical shape. We also identified numerous large seafloor mounds, which we infer to have formed by the expansion of gas hydrate accumulations within the shallow subsurface, so-called gas hydrate pingos. These are up to 1100 m wide and 20 m high. Smaller craters and mounds < 200 m wide and with varying relief are abundant across the study site. The empirical observations and analyses are combined with numerical modelling of ice sheet, isostatic and gas hydrate evolution and indicate that during glaciation, natural gas migrating from underlying hydrocarbon reservoirs was stored as subglacial gas hydrates. On ice sheet retreat, methane from these hydrate reservoirs and underlying free gas built up and abruptly released, forming the giant mounds and craters observed in the study area today. Petroleum basins are abundant beneath formerly and presently glaciated regions. We infer that episodes of subglacial sequestration of gas hydrates and underlying free gas and subsequent abrupt expulsions were common and widespread throughout

  6. Technical evaluation summary of the in situ vitrification melt expulsion at the Oak Ridge National Laboratory on April 21, 1996, Oak Ridge, Tennessee

    International Nuclear Information System (INIS)

    1996-07-01

    On April 21, 1996, at 6:12 PM, about 20 tons of molten glass were expelled from a 216-ton body of molten (1600 C) radioactively contaminated soil (containing 2.4 Ci 137 Cs) at an ORNL site. This was caused by pressurized steam venting rapidly through, rather than around, the molten body. During the previous 17 days, an old seepage pit was undergoing in situ vitrification to convert porous, leachable soil into an impermeable waste form. Analyses revealed that 0.13 μCi of 137 Cs could have been released and would have delivered a hypothetical, unmeasurable dose of 0.02 μrem to the nearest private residence outside the Oak Ridge Reservation. The expelled glass particles, having a uniform specific activity of 1.2E-08 Ci/g, contained no smearable or transferrable activity. Thus, the overall environmental impact was insignificant. Fire damage was completely limited to the off-gas hood. Techniques were identified to minimize the probability of future melt expulsions

  7. Leaf swallowing and parasite expulsion in Khao Yai white-handed gibbons (Hylobates lar), the first report in an Asian ape species.

    Science.gov (United States)

    Barelli, Claudia; Huffman, Michael A

    2017-03-01

    Leaf swallowing behavior, known as a form of self-medication for the control of nematode and tapeworm infection, occurs widely in all the African great apes (Pan troglodytes schweinfurthii, P. t. troglodytes, P. t. verus, P. t. vellerosus, Pan paniscus, Gorilla gorilla graueri), except mountain gorillas. It is also reported to occur in a similar context across a wide array of other animal taxa including, domestic dogs, wolves, brown bears, and civets. Despite long-term research on Asian great and small apes, this is the first report of leaf swallowing in an Asian species, the white-handed gibbon (Hylobates lar) in Khao Yai National Park, central Thailand. We present the first evidence of leaf swallowing (Gironniera nervosa Planch CANNABACEA) behavior (N = 5 cases) and parasite (Streptopharagus pigmentatus) expulsion (N = 4 cases), recorded during 4,300 hr of direct animal observations during two distinct research projects. We recovered 4-18 rough, hairy, and hispid surfaced leaves from each sample, undigested and folded, from the freshly evacuated feces of five different individuals (2 males, 3 females, 5 to 34+ years old) living in three different social groups, between the hours of 06:00 to 10:30. Based on close inspection of the leaves, as observed in chimpanzees, it was clear that they were taken into the mouth, one at a time, folded and detached from the stem with the teeth before swallowing them whole. All instances occurred during the rainy season, the time when nematode worms were also found in the feces, although they were not found together with leaves in the same feces. These striking similarities in the details of leaf swallowing between white-handed gibbons and African great apes, and other animal species, suggest a similar self-medicative function. © 2016 Wiley Periodicals, Inc.

  8. A Mechanical Modelling of the Primary Migration Modélisation mécanique de l'expulsion

    Directory of Open Access Journals (Sweden)

    Schneider F.

    2006-12-01

    Full Text Available In order to address the question of oil-induced microfracturing, we propose under specific assumptions (plane circular kerogen flake surrounded by an homogeneous microfractured porous medium an analytical method for the determination of the oil pressure increase. It is based on a mechanical modelling of the kerogen-oil-rock interaction at the microscopicscale of a kerogen particle. It is shown that the oil pressure tends towards an asymptotic value when the chemical transformation of kerogen is completed. The effect of the macroscopic stress variation during oil formation process proves to be negligible. However, this effect must be taken into account for describing the evolution of oil pressure at earlier stages of oil formation process. The increase in burial depth induces an increase of oil pressure as well as a variation of the macroscopic stress which both determine the microscopic stress field. The possibility of microfracturing depends on the position of the microscopic stress state with respect to the fracture criterion. If the duration of the oil formation process is short enough, so that the macroscopic stress change associated with the corresponding (small burial depth increase can be neglected, it is found that microfracturing is likely for the usual values of rock tensile strength. However, in the general case, neglecting the macroscopic stress change can significantly overestimate the possibility of fracture initiation due to oil-pressure increase. Considering now the macroscopicscale of the source bed, the evolution equation of the oil pressure are derived within the framework of Biot's poroelasticity theory. The oil pressure rate proves to be the sum of a diffusion term which accounts for oil migration within the source bed, and of two source terms respectively associated with the volume expansion tendency of the kerogen - oil transformation and the overburden pressure increase. Dans le but d'étudier le problème de la

  9. Position Information

    Data.gov (United States)

    Social Security Administration — The Position Information Data Asset provides the ability to search for active SSA position descriptions using various search criteria. An individual may search by PD...

  10. Positive Psychology

    Science.gov (United States)

    Peterson, Christopher

    2009-01-01

    Positive psychology is a deliberate correction to the focus of psychology on problems. Positive psychology does not deny the difficulties that people may experience but does suggest that sole attention to disorder leads to an incomplete view of the human condition. Positive psychologists concern themselves with four major topics: (1) positive…

  11. Ubiquitous positioning

    CERN Document Server

    Mannings, Robin

    2008-01-01

    This groundbreaking resource offers a practical, in-depth understanding of Ubiquitous Positioning - positioning systems that identify the location and position of people, vehicles and objects in time and space in the digitized networked economy. The future and growth of ubiquitous positioning will be fueled by the convergence of many other areas of technology, from mobile telematics, Internet technology, and location systems, to sensing systems, geographic information systems, and the semantic web. This first-of-its-kind volume explores ubiquitous positioning from a convergence perspective, of

  12. Positioning consumption

    DEFF Research Database (Denmark)

    Halkier, Bente; Keller, Margit

    2014-01-01

    positionings emerges based on empirical examples of research in parent–children consumption. Positionings are flexible discursive fixations of the relationship between the performances of the practitioner, other practitioners, media discourse and consumption activities. The basic positioning types...... are the practice maintenance and the practice change position, with different sorts of adapting in between. Media discourse can become a resource for a resistant position against social control or for an appropriating position in favour of space for action. Regardless of the current relation to a particular media......This article analyses the ways in which media discourses become a part of contested consumption activities. We apply a positioning perspective with practice theory to focus on how practitioners relate to media discourse as a symbolic resource in their everyday practices. A typology of performance...

  13. Mate attraction, retention and expulsion.

    Science.gov (United States)

    Miner, Emily J; Shackelford, Todd K

    2010-02-01

    Sexual selection theory and parental investment theory have guided much of the evolutionary psychological research on human mating. Based on these theories, researchers have predicted and found sex differences in mating preferences and behaviors. Men generally prefer that their long-term partners are youthful and physically attractive. Women generally prefer that their long-term partners have existing resources or clear potential for securing resources and display a willingness to invest those resources in children the relationship might produce. Both men and women, however, desire long-term partners who are kind and intelligent. Once a partner is obtained, men and women act in sex-specific ways to ensure the continuation and exclusivity of the relationship. Men, in particular, engage in behaviors designed to prevent, correct, and anticipate their partner's sexual infidelity. Relationships dissolve for evolutionarily-relevant reasons: infidelity, childlessness, and infertility. The discussion addresses directions for future research.

  14. Researcher positioning

    DEFF Research Database (Denmark)

    Mørck, Line Lerche; Khawaja, Iram

    2009-01-01

    abstract  This article focuses on the complex and multi-layered process of researcher positioning, specifically in relation to the politically sensitive study of marginalised and ‘othered' groups such as Muslims living in Denmark. We discuss the impact of different ethnic, religious and racial...... political and personal involvement by the researcher, which challenges traditional perspectives on research and researcher positioning. A key point in this regard is the importance of constant awareness of and reflection on the multiple ways in which one's positioning as a researcher influences the research...

  15. Radiographic positioning

    International Nuclear Information System (INIS)

    Eisenberg, R.L.; Dennis, C.A.; May, C.

    1989-01-01

    This book concentrates on the routine radiographic examinations commonly performed. It details the wide variety of examinations possible and their place in initial learning and in the radiology department as references for those occasions when an unusual examination is requested. This book provides information ranging from basic terminology to skeletal positioning to special procedures. Positions are discussed and supplemented with a picture of a patient, the resulting radiograph, and a labeled diagram. Immobilization and proper shielding of the patient are also shown

  16. Position encoder

    International Nuclear Information System (INIS)

    Goursky, Vsevolod

    1975-01-01

    A circuitry for deriving the quotient of signal delivered by position-sensitive detectors is described. Digital output is obtained in the form of 10- to 12-bit words. Impact position may be determined with 0.25% accuracy when the dynamic range of the energy signal is less 1:10, and 0.5% accuracy when the dynamic range is 1:20. The division requires an average time of 5μs for 10-bit words

  17. Position encoder

    International Nuclear Information System (INIS)

    Goursky, V.

    1975-05-01

    This paper describes circuitry for deriving the quotient of signals delivered by position-sensitive detectors. Digital output is obtained in the form of 10 to 12 bit words. Impact position may be determined with 0.25% accuracy when the dynamic range of the energy signal is less than 1:10, and 0.5% accuracy when the dynamic range is 1:20. The division requires an average time of 5μs for 10-bit words [fr

  18. Positional games

    CERN Document Server

    Hefetz, Dan; Stojaković, Miloš; Szabó, Tibor

    2014-01-01

    This text serves as a thorough introduction to the rapidly developing field of positional games. This area constitutes an important branch of combinatorics, whose aim it is to systematically develop an extensive mathematical basis for a variety of two-player perfect information games. These range from such popular games as Tic-Tac-Toe and Hex to purely abstract games played on graphs and hypergraphs. The subject of positional games is strongly related to several other branches of combinatorics such as Ramsey theory, extremal graph and set theory, and the probabilistic method. These notes cover a variety of topics in positional games, including both classical results and recent important developments. They are presented in an accessible way and are accompanied by exercises of varying difficulty, helping the reader to better understand the theory. The text will benefit both researchers and graduate students in combinatorics and adjacent fields.

  19. Researcher Positioning

    DEFF Research Database (Denmark)

    Khawaja, Iram; Mørck, Line Lerche

    2009-01-01

    involvement by the researcher, which challenges traditional perspectives onresearch and researcher positioning. A key point in this regard is the importance ofconstant awareness of and reflection on the multiple ways in which one's positioningas a researcher influences the research process. Studying the other...

  20. Position detector

    International Nuclear Information System (INIS)

    Hayakawa, Toshifumi.

    1985-01-01

    Purpose: To enable to detect the position of an moving object in a control rod position detector, stably in a digital manner at a high accuracy and free from the undesired effects of circumstantial conditions such as the reactor temperature. Constitution: Coils connected in parallel with each other are disposed along the passage of a moving object and variable resistors and relays are connected in series with each of the coils respectively. Light emitting diodes is connected in series with the contacts of the respective relays. The resistance value of the variable resistors are adjusted depending on the changes in the circumstantial conditions and temperature distribution upon carrying out the positional detection. When the object is inserted into a coils, the relevant relay is deenergized, by which the relay contacts are closed to light up the diode. In the same manner, as the object is successively inserted into the coils, the diodes are lighted-up successively thereby enabling highly accurate and stable positional detection in a digital manner, free from the undesired effects of the circumstantial conditions. (Horiuchi, T.)

  1. Foxp3⁺ regulatory T cells delay expulsion of intestinal nematodes by suppression of IL-9-driven mast cell activation in BALB/c but not in C57BL/6 mice.

    Directory of Open Access Journals (Sweden)

    Birte Blankenhaus

    2014-02-01

    Full Text Available Accumulating evidence suggests that IL-9-mediated immunity plays a fundamental role in control of intestinal nematode infection. Here we report a different impact of Foxp3⁺ regulatory T cells (Treg in nematode-induced evasion of IL-9-mediated immunity in BALB/c and C57BL/6 mice. Infection with Strongyloides ratti induced Treg expansion with similar kinetics and phenotype in both strains. Strikingly, Treg depletion reduced parasite burden selectively in BALB/c but not in C57BL/6 mice. Treg function was apparent in both strains as Treg depletion increased nematode-specific humoral and cellular Th2 response in BALB/c and C57BL/6 mice to the same extent. Improved resistance in Treg-depleted BALB/c mice was accompanied by increased production of IL-9 and accelerated degranulation of mast cells. In contrast, IL-9 production was not significantly elevated and kinetics of mast cell degranulation were unaffected by Treg depletion in C57BL/6 mice. By in vivo neutralization, we demonstrate that increased IL-9 production during the first days of infection caused accelerated mast cell degranulation and rapid expulsion of S. ratti adults from the small intestine of Treg-depleted BALB/c mice. In genetically mast cell-deficient (Cpa3-Cre BALB/c mice, Treg depletion still resulted in increased IL-9 production but resistance to S. ratti infection was lost, suggesting that IL-9-driven mast cell activation mediated accelerated expulsion of S. ratti in Treg-depleted BALB/c mice. This IL-9-driven mast cell degranulation is a central mechanism of S. ratti expulsion in both, BALB/c and C57BL/6 mice, because IL-9 injection reduced and IL-9 neutralization increased parasite burden in the presence of Treg in both strains. Therefore our results suggest that Foxp3⁺ Treg suppress sufficient IL-9 production for subsequent mast cell degranulation during S. ratti infection in a non-redundant manner in BALB/c mice, whereas additional regulatory pathways are functional in

  2. Foxp3+ Regulatory T Cells Delay Expulsion of Intestinal Nematodes by Suppression of IL-9-Driven Mast Cell Activation in BALB/c but Not in C57BL/6 Mice

    Science.gov (United States)

    Brenz, Yannick; Eschbach, Marie-Luise; Hartmann, Wiebke; Haben, Irma; Sparwasser, Tim; Huehn, Jochen; Kühl, Anja; Feyerabend, Thorsten B.; Rodewald, Hans-Reimer; Breloer, Minka

    2014-01-01

    Accumulating evidence suggests that IL-9-mediated immunity plays a fundamental role in control of intestinal nematode infection. Here we report a different impact of Foxp3+ regulatory T cells (Treg) in nematode-induced evasion of IL-9-mediated immunity in BALB/c and C57BL/6 mice. Infection with Strongyloides ratti induced Treg expansion with similar kinetics and phenotype in both strains. Strikingly, Treg depletion reduced parasite burden selectively in BALB/c but not in C57BL/6 mice. Treg function was apparent in both strains as Treg depletion increased nematode-specific humoral and cellular Th2 response in BALB/c and C57BL/6 mice to the same extent. Improved resistance in Treg-depleted BALB/c mice was accompanied by increased production of IL-9 and accelerated degranulation of mast cells. In contrast, IL-9 production was not significantly elevated and kinetics of mast cell degranulation were unaffected by Treg depletion in C57BL/6 mice. By in vivo neutralization, we demonstrate that increased IL-9 production during the first days of infection caused accelerated mast cell degranulation and rapid expulsion of S. ratti adults from the small intestine of Treg-depleted BALB/c mice. In genetically mast cell-deficient (Cpa3-Cre) BALB/c mice, Treg depletion still resulted in increased IL-9 production but resistance to S. ratti infection was lost, suggesting that IL-9-driven mast cell activation mediated accelerated expulsion of S. ratti in Treg-depleted BALB/c mice. This IL-9-driven mast cell degranulation is a central mechanism of S. ratti expulsion in both, BALB/c and C57BL/6 mice, because IL-9 injection reduced and IL-9 neutralization increased parasite burden in the presence of Treg in both strains. Therefore our results suggest that Foxp3+ Treg suppress sufficient IL-9 production for subsequent mast cell degranulation during S. ratti infection in a non-redundant manner in BALB/c mice, whereas additional regulatory pathways are functional in Treg-depleted C57BL/6

  3. Foxp3⁺ regulatory T cells delay expulsion of intestinal nematodes by suppression of IL-9-driven mast cell activation in BALB/c but not in C57BL/6 mice.

    Science.gov (United States)

    Blankenhaus, Birte; Reitz, Martina; Brenz, Yannick; Eschbach, Marie-Luise; Hartmann, Wiebke; Haben, Irma; Sparwasser, Tim; Huehn, Jochen; Kühl, Anja; Feyerabend, Thorsten B; Rodewald, Hans-Reimer; Breloer, Minka

    2014-02-01

    Accumulating evidence suggests that IL-9-mediated immunity plays a fundamental role in control of intestinal nematode infection. Here we report a different impact of Foxp3⁺ regulatory T cells (Treg) in nematode-induced evasion of IL-9-mediated immunity in BALB/c and C57BL/6 mice. Infection with Strongyloides ratti induced Treg expansion with similar kinetics and phenotype in both strains. Strikingly, Treg depletion reduced parasite burden selectively in BALB/c but not in C57BL/6 mice. Treg function was apparent in both strains as Treg depletion increased nematode-specific humoral and cellular Th2 response in BALB/c and C57BL/6 mice to the same extent. Improved resistance in Treg-depleted BALB/c mice was accompanied by increased production of IL-9 and accelerated degranulation of mast cells. In contrast, IL-9 production was not significantly elevated and kinetics of mast cell degranulation were unaffected by Treg depletion in C57BL/6 mice. By in vivo neutralization, we demonstrate that increased IL-9 production during the first days of infection caused accelerated mast cell degranulation and rapid expulsion of S. ratti adults from the small intestine of Treg-depleted BALB/c mice. In genetically mast cell-deficient (Cpa3-Cre) BALB/c mice, Treg depletion still resulted in increased IL-9 production but resistance to S. ratti infection was lost, suggesting that IL-9-driven mast cell activation mediated accelerated expulsion of S. ratti in Treg-depleted BALB/c mice. This IL-9-driven mast cell degranulation is a central mechanism of S. ratti expulsion in both, BALB/c and C57BL/6 mice, because IL-9 injection reduced and IL-9 neutralization increased parasite burden in the presence of Treg in both strains. Therefore our results suggest that Foxp3⁺ Treg suppress sufficient IL-9 production for subsequent mast cell degranulation during S. ratti infection in a non-redundant manner in BALB/c mice, whereas additional regulatory pathways are functional in Treg-depleted C57BL/6

  4. The vascular basis of the positional influence of the intraocular pressure.

    Science.gov (United States)

    Krieglstein, G K; Waller, W K; Leydhecker, W

    1978-05-02

    By measuring intraocular pressure in different body positions from 60 degrees semiupright to 30 degrees head down, a nonlinear relationship between IOP increase and body position was confirmed. IOP postural response in individual subjects was roughly correlated to ophthalmic arterial pressure and to the episcleral venous pressure postural response. In one series of subjects, the episcleral venous pressure increments due to posture wa; parallel to the applanation-indentation disparity in the same individual eyes. Differential tonometry with applanation or indentation procedures under blind conditions gave significantly low indentation readings. It is concluded that IOP postural response depends on arterial and venous vascular changes when subjects move from an erect to a horizontal body position. Blood expulsion from the choroid by indentation tonometry might be the reason that this tonometric procedure does not measure IOP changes based on vascular changes.

  5. Maintaining positive

    OpenAIRE

    Gheorghe Gh. IONESCU; Adina Letitia NEGRUSA

    2004-01-01

    Maintaining positive work-force relationships includes in effective labor-management relations and making appropriate responses to current employee issues. Among the major current employee issues are protection from arbitrary dismissal, drug and alcohol abuse, privacy rights and family maters and they impact work. In our paper we discus two problems: first, the meanings of industrial democracy; second, the three principal operational concepts of industrial democracy (1) industrial democracy t...

  6. Applying behavior analysis to school violence and discipline problems: Schoolwide positive behavior support

    Science.gov (United States)

    Anderson, Cynthia M.; Kincaid, Donald

    2005-01-01

    School discipline is a growing concern in the United States. Educators frequently are faced with discipline problems ranging from infrequent but extreme problems (e.g., shootings) to less severe problems that occur at high frequency (e.g., bullying, insubordination, tardiness, and fighting). Unfortunately, teachers report feeling ill prepared to deal effectively with discipline problems in schools. Further, research suggests that many commonly used strategies, such as suspension, expulsion, and other reactive strategies, are not effective for ameliorating discipline problems and may, in fact, make the situation worse. The principles and technology of behavior analysis have been demonstrated to be extremely effective for decreasing problem behavior and increasing social skills exhibited by school children. Recently, these principles and techniques have been applied at the level of the entire school, in a movement termed schoolwide positive behavior support. In this paper we review the tenets of schoolwide positive behavior support, demonstrating the relation between this technology and applied behavior analysis. PMID:22478439

  7. Experimental investigation of the role of rock fabric in gas generation and expulsion during thermal maturation: Anhydrous closed-system pyrolysis of a bitumen-rich Eagle Ford Shale

    Science.gov (United States)

    Shao, Deyong; Ellis, Geoffrey S.; Li, Yanfang; Zhang, Tongwei

    2018-01-01

    Gold-tube pyrolysis experiments were conducted on miniature core plugs and powdered rock from a bitumen-rich sample of Eagle Ford Shale to investigate the role of rock fabric in gas generation and expulsion during thermal maturation. The samples were isothermally heated at 130, 300, 310, 333, 367, 400, and 425 °C for 72 h under a confining pressure of 68.0 MPa, corresponding to six levels of induced thermal maturity: pre-oil generation (130 °C/72 h), incipient oil/bitumen generation (300 and 310 °C/72 h), early oil generation (333 °C/72 h), peak oil generation (367 °C/72 h), early oil cracking (400 °C/72 h), and late oil cracking (425 °C/72 h). Experimental results show that gas retention coupled with compositional fractionation occurs in the core plug experiments and varies as a function of thermal maturity. During the incipient oil/bitumen generation stage, yields of methane through pentane (C1–C5) from core plugs are significantly lower than those from rock powder, and gases from core plugs are enriched in methane. However, the differences in C1–C5 gas yield and composition decrease throughout the oil generation stage, and by the oil cracking stage no obvious compositional difference in C1–C5 gases exists. The decrease in the effect of rock fabric on gas yield and composition with increasing maturity is the result of an increase in gas expulsion efficiency. Pyrolysis of rock powder yields 4–16 times more CO2 compared to miniature core plugs, with δ13CCO2 values ranging from −2.9‰ to −0.6‰, likely due to carbonate decomposition accelerated by reactions with organic acids. Furthermore, lower yields of gaseous alkenes and H2 from core plug experiments sugge

  8. Sonographic evaluation of the fetal spine position and success rate of manual rotation of the fetus in occiput posterior position: A randomized controlled trial.

    Science.gov (United States)

    Masturzo, Bianca; Farina, Antonio; Attamante, Lorenza; Piazzese, Annalisa; Rolfo, Alessandro; Gaglioti, Pietro; Todros, Tullia

    2017-10-01

    To evaluate whether sonographic (US) diagnosis of the fetal spine position could increase the success rate of manual rotation of the fetal occiput (MRFO) in second-stage arrest in persistent occiput posterior position (OPP). In this randomized controlled parallel single-center trial, 58 nulliparous in second-stage arrest of labor with fetus in cephalic presentation and OPP diagnosed by US were randomly assigned to group A where the fetal spine position was not known by the operator or to group B where the operator knew it. The main outcome was the success of MRFO in the two groups. Secondary outcomes were perineal injuries, blood loss, duration of expulsive period, and neonatal APGAR at 5 minutes. A priori knowledge of the spine position improves the success of the MRFO (41.4% group A versus 82.8% group B, p value < 0.001), the percentage of spontaneous deliveries (27.6% group A versus 69% group B, p value = 0.01), and maternal outcome (intact perineum and blood loss). No differences were detected on the neonatal side. MRFO is a safe and useful procedure that should be performed in second-stage arrest in OPP. A better performance was observed when supported by the US knowledge of the spine position. © 2017 Wiley Periodicals, Inc. J Clin Ultrasound 45:472-476, 2017. © 2017 Wiley Periodicals, Inc.

  9. Benign positional vertigo

    Science.gov (United States)

    Vertigo - positional; Benign paroxysmal positional vertigo; BPPV: dizziness- positional ... Benign positional vertigo is also called benign paroxysmal positional vertigo (BPPV). It is caused by a problem in the inner ear. ...

  10. Position automatic determination technology

    International Nuclear Information System (INIS)

    1985-10-01

    This book tells of method of position determination and characteristic, control method of position determination and point of design, point of sensor choice for position detector, position determination of digital control system, application of clutch break in high frequency position determination, automation technique of position determination, position determination by electromagnetic clutch and break, air cylinder, cam and solenoid, stop position control of automatic guide vehicle, stacker crane and automatic transfer control.

  11. Partial vaginal expulsion of a leiomyosarcoma

    Directory of Open Access Journals (Sweden)

    Kaori Yokochi

    2013-06-01

    Full Text Available Uterine sarcomas are an uncommon and heterogeneous group of tumors that account for 3-7% of the malignant neoplasms of the uterus and approximately 1% of all malignant tumors of the female genital system. The main clinical manifestations are abnormal uterine bleeding in pre- or postmenopausal women. Pelvic pain, abdominal distension, urinary urgency, and profuse and fetid leukorrhea are other frequent complaints. The authors present a case of a 48-year-old patient that was in amenorrhea for 2 years, who sought treatment for vaginal bleeding. On physical examination, the abdomen was distended, painful in the hypogastrium and upon examination of the external genitalia, it was observed the exteriorization of an amorphous “mass”. The patient was submitted to uterine curettage. The results of the histological examination revealed leiomyosarcoma. Staging workup showed an enlarged uterus with endometrial lesion, and non-calcified pulmonary nodules. The patient underwent a pan-hysterectomy and chemotherapy, and is under oncologic treatment. The authors call attention for the unusual form of presentation of this entity.

  12. MAGNETIC FLUX EXPULSION IN STAR FORMATION

    International Nuclear Information System (INIS)

    Zhao Bo; Li Zhiyun; Nakamura, Fumitaka; Krasnopolsky, Ruben; Shang, Hsien

    2011-01-01

    Stars form in dense cores of magnetized molecular clouds. If the magnetic flux threading the cores is dragged into the stars, the stellar field would be orders of magnitude stronger than observed. This well-known 'magnetic flux problem' demands that most of the core magnetic flux be decoupled from the matter that enters the star. We carry out the first exploration of what happens to the decoupled magnetic flux in three dimensions, using a magnetohydrodynamic (MHD) version of the ENZO adaptive mesh refinement code. The field-matter decoupling is achieved through a sink particle treatment, which is needed to follow the protostellar accretion phase of star formation. We find that the accumulation of the decoupled flux near the accreting protostar leads to a magnetic pressure buildup. The high pressure is released anisotropically along the path of least resistance. It drives a low-density expanding region in which the decoupled magnetic flux is expelled. This decoupling-enabled magnetic structure has never been seen before in three-dimensional MHD simulations of star formation. It generates a strong asymmetry in the protostellar accretion flow, potentially giving a kick to the star. In the presence of an initial core rotation, the structure presents an obstacle to the formation of a rotationally supported disk, in addition to magnetic braking, by acting as a rigid magnetic wall that prevents the rotating gas from completing a full orbit around the central object. We conclude that the decoupled magnetic flux from the stellar matter can strongly affect the protostellar collapse dynamics.

  13. Positive Psychology: Positive Emotions and Emotional Intelegence

    OpenAIRE

    Miloseva, Lence

    2008-01-01

    The paper focuses on the and emotional intelligence. We try to answer on some questions regarding the role which positive emotions have in our life’s. The broaden-and-build theory (Fredrickson, 1998; 2001) predicts that positive emotions are useful in several ways. They guide present behavior, by broadening one’s attention and cognition, setting the stage for creative, explorative, and innovative pursuits. As well, positive emotions build personal and social resources to help individuals achi...

  14. Want Positive Behavior? Use Positive Language

    Science.gov (United States)

    Wood, Chip; Freeman-Loftis, Babs

    2012-01-01

    Positive adult language is the professional use of words and tone of voice to enable students to learn in an engaged, active way. This includes learning social skills. To guide children toward choosing and maintaining positive behaviors, adults need to carefully choose the words and tone of voice used when speaking to them. Learning to use…

  15. Benign positional vertigo - aftercare

    Science.gov (United States)

    Vertigo - positional - aftercare; Benign paroxysmal positional vertigo - aftercare; BPPV - aftercare; Dizziness - positional vertigo ... Your health care provider may have treated your vertigo with the Epley maneuver . These are head movements ...

  16. A 3D Printed Linear Pneumatic Actuator for Position, Force and Impedance Control

    Directory of Open Access Journals (Sweden)

    Jeremy Krause

    2018-05-01

    Full Text Available Although 3D printing has the potential to provide greater customization and to reduce the costs of creating actuators for industrial applications, the 3D printing of actuators is still a relatively new concept. We have developed a pneumatic actuator with 3D-printed parts and placed sensors for position and force control. So far, 3D printing has been used to create pneumatic actuators of the bellows type, thus having a limited travel distance, utilizing low pressures for actuation and being capable of only limited force production and response rates. In contrast, our actuator is linear with a large travel distance and operating at a relatively higher pressure, thus providing great forces and response rates, and this the main novelty of the work. We demonstrate solutions to key challenges that arise during the design and fabrication of 3D-printed linear actuators. These include: (1 the strategic use of metallic parts in high stress areas (i.e., the piston rod; (2 post-processing of the inner surface of the cylinder for smooth finish; (3 piston head design and seal placement for strong and leak-proof action; and (4 sensor choice and placement for position and force control. A permanent magnet placed in the piston head is detected using Hall effect sensors placed along the length of the cylinder to measure the position, and pressure sensors placed at the supply ports were used for force measurement. We demonstrate the actuator performing position, force and impedance control. Our work has the potential to open new avenues for creating less expensive, customizable and capable actuators for industrial and other applications.

  17. Incorrect position of Essure microinserts 3 months after successful bilateral placement.

    Science.gov (United States)

    Gerritse, Maria B E; Veersema, Sebastiaan; Timmermans, Anne; Brölmann, Hans A M

    2009-03-01

    To describe incorrect positions of Essure microinserts detected at 3 months' follow-up. Case report. Outpatient department of obstetrics and gynecology in a Dutch teaching hospital. Initial series of 100 patients who underwent hysteroscopic sterilization using Essure between December 2003 and June 2004. Hysteroscopic placement of the Essure System, follow-up at 3 months with transvaginal ultrasound (TVU), and hysterosalpingography. Bilateral placement rate, tubal obstruction, and detection of incorrect Essure microinsert localization at follow-up after apparent successful bilateral placement. Bilateral placement of Essure microinserts in one session was successful in 93 women (93%). In 90 of these women (96.8%), tubal obstruction was proven at follow-up 3 months later. Three incorrect positions of an Essure insert were seen: two expulsions and one perforation into the abdominal cavity. Incorrect position of Essure microinserts was seen only when the initial placement procedure was difficult. When a placement procedure was difficult or other suboptimal conditions are present during the procedure, we advise performing a TVU or pelvic X-ray in these women 4 weeks after the procedure or after the first vaginal bleeding, instead of waiting for follow-up after 3 months.

  18. Multi-technology positioning

    CERN Document Server

    Lohan, Elena-Simona; Wymeersch, Henk; Seco-Granados, Gonzalo; Nykänen, Ossi

    2017-01-01

    This book provides an overview of positioning technologies, applications and services in a format accessible to a wide variety of readers. Readers who have always wanted to understand how satellite-based positioning, wireless network positioning, inertial navigation, and their combinations work will find great value in this book. Readers will also learn about the advantages and disadvantages of different positioning methods, their limitations and challenges. Cognitive positioning, adding the brain to determine which technologies to use at device runtime, is introduced as well. Coverage also includes the use of position information for Location Based Services (LBS), as well as context-aware positioning services, designed for better user experience. • Brings understanding of positioning technology to readers from a variety of disciplines • Reviews multiple techniques, providing insight on the pros, cons and challenges related to each • Designed to be a tutorial on basic principles, avoiding unnecessary de...

  19. Navicular bone position determined by positional MRI

    DEFF Research Database (Denmark)

    Hansen, Philip; Johannsen, Finn E; Hangaard, Stine

    2016-01-01

    -scanner). Scanning was performed in supine and standing position, respectively. Two radiologists evaluated the images in a blinded manner. Reliability and agreement were assessed by calculation of intraclass correlation coefficient (ICC) and 95 % limits of agreement as a percentage of the mean (LOA%). RESULTS...

  20. Pretty Easy Pervasive Positioning

    DEFF Research Database (Denmark)

    Hansen, Rene; Wind, Rico; Jensen, Christian Søndergaard

    2009-01-01

    With the increasing availability of positioning based on GPS, Wi-Fi, and cellular technologies and the proliferation of mobile devices with GPS, Wi-Fi and cellular connectivity, ubiquitous positioning is becoming a reality. While offerings by companies such as Google, Skyhook, and Spotigo render...... positioning possible in outdoor settings, including urban environments with limited GPS coverage, they remain unable to offer accurate indoor positioning. We will demonstrate a software infrastructure that makes it easy for anybody to build support for accurate Wi-Fi based positioning in buildings. All...... that is needed is a building with Wi-Fi coverage, access to the building, a floor plan of the building, and a Wi-Fi enabled device. Specifically, we will explain the software infrastructure and the steps that must be completed to obtain support for positioning. And we will demonstrate the positioning obtained...

  1. A new UHV micro positioning system for high load

    Energy Technology Data Exchange (ETDEWEB)

    Colldelram, Carles, E-mail: ccolldelram@cells.es; Nicolas, Josep, E-mail: jnicolas@cells.es; Nikitina, Liudmila, E-mail: lnikitina@cells.es [ALBA Synchrotron, Carretera BP 1413, de Cerdanyola del Vallès a Sant Cugat del Vallès, Km. 3,3, 08290 Cerdanyola del Vallès, Barcelona (Spain)

    2016-07-27

    In this work we report the design and performance of a novel compact in-vacuum actuator, designed to be compatible with all the motions required for the scissor-type ESRF mirror bender. These mirror benders include several linear actuators, which drive the mirror bending torques, as well as the main alignment motions such as pitch and translation along the normal to the mirror surface. The motions are provided by compact linear actuators, which consist of motor, reduction, spindle and nut, encapsulated on a closed air volume to provide vacuum compatibility. The actuator includes a hydroformed bellows to transmit the force to the actuator tip, and an electrical feedthrough for the motor cables. The design boundaries for these actuators are quite tight, as they must be integrated in a narrow volume, must be UHV compatible and must provide high resolution, for a relatively high load. As a result, they have limited mechanical performance, and in some cases poor reliability. To overcome these problems, we designed and implemented a different concept. In the proposed concept, the motor rotation is converted onto a linear motion by means of a cam instead of a spindle and a nut. This allows for much shorter and stiffer transmission system, with similar dimensions. The vacuum compatibility is intrinsic for this solution, since the whole mechanism of the actuator is UHV compatible. All motions are preloaded and guided by vacuum compatible (hybrid metal-ceramics) ball bearings. This allows the system reaching a repeatability and backlash well within the micron. The absence of friction allows for a high reliability and releases the maintenance needs of the system. The transmission is intrinsically irreversible, and the system can hold a load of 250 N within a few nanometers without any holding current on the motors. This allows the system to move reliably also in micro-stepping mode, providing a resolution well below the half-step nominal resolution of 100 nm. Performances

  2. A new UHV micro positioning system for high load

    International Nuclear Information System (INIS)

    Colldelram, Carles; Nicolas, Josep; Nikitina, Liudmila

    2016-01-01

    In this work we report the design and performance of a novel compact in-vacuum actuator, designed to be compatible with all the motions required for the scissor-type ESRF mirror bender. These mirror benders include several linear actuators, which drive the mirror bending torques, as well as the main alignment motions such as pitch and translation along the normal to the mirror surface. The motions are provided by compact linear actuators, which consist of motor, reduction, spindle and nut, encapsulated on a closed air volume to provide vacuum compatibility. The actuator includes a hydroformed bellows to transmit the force to the actuator tip, and an electrical feedthrough for the motor cables. The design boundaries for these actuators are quite tight, as they must be integrated in a narrow volume, must be UHV compatible and must provide high resolution, for a relatively high load. As a result, they have limited mechanical performance, and in some cases poor reliability. To overcome these problems, we designed and implemented a different concept. In the proposed concept, the motor rotation is converted onto a linear motion by means of a cam instead of a spindle and a nut. This allows for much shorter and stiffer transmission system, with similar dimensions. The vacuum compatibility is intrinsic for this solution, since the whole mechanism of the actuator is UHV compatible. All motions are preloaded and guided by vacuum compatible (hybrid metal-ceramics) ball bearings. This allows the system reaching a repeatability and backlash well within the micron. The absence of friction allows for a high reliability and releases the maintenance needs of the system. The transmission is intrinsically irreversible, and the system can hold a load of 250 N within a few nanometers without any holding current on the motors. This allows the system to move reliably also in micro-stepping mode, providing a resolution well below the half-step nominal resolution of 100 nm. Performances

  3. Positive criminology in practice.

    Science.gov (United States)

    Ronel, Natti; Segev, Dana

    2014-11-01

    The discourse regarding offender rehabilitation has been criticized by various scholars who have claimed that reducing negative causes and managing risk will not automatically prompt positive human development and elements that are associated with desistance. Positive criminology is an innovative concept that challenges the common preoccupation with negative elements, by placing emphasis on human encounters and forces of inclusion that are experienced positively by target individuals and that can promote crime desistance. However, as the concept is relatively new, there are still no guiding principles for the practice of positive criminology that could direct research and the criminal justice system. This article attempts to fill that gap by providing principles that could be practiced by criminal justice personnel and examples of different interventions that reflect positive criminology. The article also provides ideological explanations for adopting the concept of positive criminology in practice. © The Author(s) 2013.

  4. Den positive psykologis metoder

    DEFF Research Database (Denmark)

    Andersen, Frans Ørsted; Mørck, Line Lerche; Nissen, Poul Erik

    En antologi der giver en introduktion til en række af de metoder der anvendes til forskning, assessment, test, udviklingsarbejde og intervention indenfor den positive psykologi.......En antologi der giver en introduktion til en række af de metoder der anvendes til forskning, assessment, test, udviklingsarbejde og intervention indenfor den positive psykologi....

  5. Modern management positions

    Directory of Open Access Journals (Sweden)

    Jovanović Petar M.

    2015-01-01

    Full Text Available In this paper we analyze contemporary managerial positions such as program manager, project portfolio manager, crisis manager and others. The idea is to promote managerial positions in Serbia, which is quite unjustifiably undervalued, primarily because of the lack of knowledge in the field of management and other issues related to management education.

  6. Positioning and locking apparatus

    Science.gov (United States)

    Hayward, M.L.; Harper, W.H.

    1985-06-19

    A positioning and locking apparatus including a fixture having a rotatable torque ring provided with a plurality of cam segments for automatically guiding a container into a desired location within the fixture. Rotation of the ring turns the container into a final position in pressure sealing relation against a hatch member.

  7. Positioning health professional identity

    DEFF Research Database (Denmark)

    Lund, Ole; Krogh Christensen, Mette; Mørcke, Anne Mette

    2017-01-01

    Drawing on positioning theory, the purpose of this paper is to characterize the activities and positions of students and supervisors at workplaces and on-campus skills training sites across the higher health professional educations of medicine, sports science, and nursing. Furthermore, the study ...... explored the impact of work-based learning (WBL) and skills training on students’ personal professional identity development....

  8. Phantom position dependence

    International Nuclear Information System (INIS)

    Thorson, M.R.; Endres, G.W.R.

    1981-01-01

    Sensitivity of the Hanford dosimeter response to its position relative to the phantom and the neutron source has always been recognized. A thorough investigation was performed to quantify dosimeter response according to: (a) dosimeter position on phantom, (b) dosimeter distance from phantom, and (c) angular relationship of dosimeter relative to neutron source and phantom. Results were obtained for neutron irradiation at several different energies

  9. Position display device

    International Nuclear Information System (INIS)

    Nishizawa, Yukio.

    1974-01-01

    Object: To provide a device capable of easily and quickly reading mutual mounting relations of control bodies such as control rods mounted on a nuclear reactor and positions to which the control bodies are driven. Structure: A scanning circuit is provided to scan positions of controllably mounted control bodies such as control rods. Values detected by scanning the positions are converted into character signals according to the values and converted into preranked color signals. The character signals and color signals are stored in a memory circuit by synchronous signals in synchronism with the scanning in the scanning circuit. Outputs of the memory circuit are displayed by a display unit such as a color Braun tube in accordance with the synchronous signals to provide color representations according to positions to which control bodies are driven in the same positional relation as the mounting of the control bodies. (Kamimura, M.)

  10. Review of Positional Nystagmus

    Directory of Open Access Journals (Sweden)

    José Ignacio BENITO-OREJAS

    2018-01-01

    Full Text Available Introduction and objective: Any change of position of the head (dynamic or static can trigger a nystagmus or increase the spontaneous. This nystagmus we call it positional. We intend to review in this chapter its definition, clinical features, etiology and the way of exploring it. Method: narrative review. Results: Positional vertigo is the most frequent vestibular disorder, and most of the times of peripheral cause. Characteristics of nystagmus or its association with other neurological symptoms are sufficient grounds to request a magnetic resonance, which will provide additional information on very few occasions. Discussion: The study of the positional nystagmus as a procedure to rule out central pathology has lost much of its relevance. Signs that Nylén defined mixed findings peripheral and central, making complex classification. Conclusion: Regardless of how to bring the patient change position (very slow or fast, if it appears an atypical nystagmus should rule out a central origin.

  11. POSITIONING STRATEGIES DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Shakhshir Ghassan

    2014-07-01

    Full Text Available The positioning strategy has suffered serious changes in the last few decades, being influenced by the rapid development of competition and the growing focus on specific traits belonging to the market, to the consumer or to the product. The purpose of this paper is to present the developments of theoretical positioning strategies and the orientation from more simple, product oriented strategies, to ones more oriented towards the client and with a briefer period of time. The world is moving in a much faster pace than in the past, thanks to communication development so companies are obliged to adopt more specific strategies in order for them to be effective. This essay represents a literary review presenting a documentary research within the scientific articles and strategy and positioning books. The paper begins with the analysis of company strategies and the marketing strategies in general. The first author to group the product positioning strategies is Porter with his three generic strategies. Following the development of brands and because of the lack of competitiveness in the simple generic positioning strategies, this paper has also presented the newer positioning strategies proposed by Kotler, Treacy & Wiersema, and also more complex ones such as Bowman's Strategy Clock and Blankson and Kalafatis positioning strategy based on the type of the consumer. The fast expansion of local brands in all categories has led to mistakes in positioning strategies, categories also presented in the current essay. The results of this study show that new positioning strategies are more and more based on the consumer and market segments and on the product specification - which have also evolved in the last decades. Adaptability to fast changes in the competitive market will represent the future positioning strategies.

  12. Positional Concerns and Institutions

    DEFF Research Database (Denmark)

    Landes, Xavier

    2013-01-01

    that invoking envy or subjective well-being is not fully satisfying for regulating positional concerns. More compelling reasons seem, in complement with efficiency, to be related to considerations for equality. In other words, if institutions could have strong reasons to pay attention to and regulate positional...... their implications for economics, positional concerns imply important normative dimensions. There have been presumed to be a symptom of envy, reduce people’s happiness, and create problems of social interaction or economic inefficiencies. Individuals are, for instance, prone to pick states of the world that improve...... concerns, it would be in virtue of their impact on the social product and individuals’ conditions of living....

  13. Stress Management: Positive Thinking

    Science.gov (United States)

    Healthy Lifestyle Stress management Positive thinking helps with stress management and can even improve your health. Practice overcoming negative self-talk ... with optimism is a key part of effective stress management. And effective stress management is associated with ...

  14. Den positive psykologis metoder

    DEFF Research Database (Denmark)

    Bogen introducerer til de mange metoder, som anvendes i positiv psykologi. dette sker ud fra en reflekteret tilgang, der ligeledes rummer bidrag fra kritisk psykologi med det formål at nuancere den positive psykologis forståelser...

  15. Clinical Positioning Space

    DEFF Research Database (Denmark)

    Williams, Lars Peter Hedegaard; Christensen, Mette Krogh; Rytter, Carsten

    2014-01-01

    In this article, we present a case study of residents’ clinical experiences and communication in outpatient oncology consultations. We apply positioning theory, a dynamic alternative to role theory, to investigate how oncology residents and patients situate themselves as persons with rights...... and duties. Drawing from seven qualitative interviews and six days of observation, we investigate the residents’ social positioning and their conversations with patients or supervisors. Our focus is on how (a) relational shifts in authority depend on each situation and its participants; (b) storylines...... establish acts and positions and narratively frame what participants can expect from a medical consultation viewed as a social episode; and (c) the positioning of rights and duties can lead to misunderstandings and frustrations. We conclude that residents and patients locate themselves in outpatient...

  16. Fluorescent optical position sensor

    Science.gov (United States)

    Weiss, Jonathan D.

    2005-11-15

    A fluorescent optical position sensor and method of operation. A small excitation source side-pumps a localized region of fluorescence at an unknown position along a fluorescent waveguide. As the fluorescent light travels down the waveguide, the intensity of fluorescent light decreases due to absorption. By measuring with one (or two) photodetectors the attenuated intensity of fluorescent light emitted from one (or both) ends of the waveguide, the position of the excitation source relative to the waveguide can be determined by comparing the measured light intensity to a calibrated response curve or mathematical model. Alternatively, excitation light can be pumped into an end of the waveguide, which generates an exponentially-decaying continuous source of fluorescent light along the length of the waveguide. The position of a photodetector oriented to view the side of the waveguide can be uniquely determined by measuring the intensity of the fluorescent light emitted radially at that location.

  17. POSITIONING STRATEGIES DEVELOPMENT

    OpenAIRE

    Shakhshir Ghassan

    2014-01-01

    The positioning strategy has suffered serious changes in the last few decades, being influenced by the rapid development of competition and the growing focus on specific traits belonging to the market, to the consumer or to the product. The purpose of this paper is to present the developments of theoretical positioning strategies and the orientation from more simple, product oriented strategies, to ones more oriented towards the client and with a briefer period of time. The world is moving in...

  18. Position measuring device

    International Nuclear Information System (INIS)

    Maeda, Kazuyuki; Takahashi, Shuichi; Maruyama, Mayumi

    1998-01-01

    The present invention provides a device capable of measuring accurate position and distance easily even at places where operator can not easily access, such as cell facilities for vitrifying radioactive wastes. Referring to a case of the vitrifying cell, an objective equipment settled in the cell is photographed by a photographing device. The image is stored in a position measuring device by way of an image input device. After several years, when the objective equipment is exchanged, a new objective equipment is photographed by a photographing device. The image is also stored in the position measuring device. The position measuring device compares the data of both of the images on the basis of pixel unit. Based on the image of the equipment before the exchange as a reference, extent of the displacement of the installation position of the equipment on the image after the exchange caused by installation error and manufacturing error is determined to decide the position of the equipment after exchange relative to the equipment before exchange. (I.S.)

  19. The Cosmic Bellows: The Big Bang and the Second Law

    Directory of Open Access Journals (Sweden)

    Stanley Salthe

    2006-01-01

    Full Text Available We present here a cosmological myth, alternative (but complementary to "the Universe Story" and "the Epic of Evolution", highlighting the roles of entropy and dissipative structures in the universe inaugurated by the Big Bang. Our myth offers answers these questions: Where are we? What are we? Why are we here? What are we to do? It also offers answers to a set of "why" questions: Why is there anything at all? and Why are there so many kinds of systems? - the answers coming from cosmology and physics (thermodynamics; Why do systems not last once they exist? - the answer coming from a materialist interpretation of information theory; and, Why are systems just the way they are and not otherwise? - the answer coming from evolutionary biology. We take into account the four kinds of causation designated by Aristotle as efficient, final, and material formal, with the Second Law of thermodynamics in the role of final cause. Conceptual problems concerning reductionism, "teleology", and the choice/chance distinction are dealt with in the framework of specification hierarchy, and the moral implications of our story explored in the conclusion.

  20. The Cosmic Bellows: The Big Bang and the Second Law

    Directory of Open Access Journals (Sweden)

    Stanley Salthe

    2005-01-01

    Full Text Available We present here a cosmological myth, alternative (but complementary to "the Universe Story" and "the Epic of Evolution", highlighting the roles of entropy and dissipative structures in the universe inaugurated by the Big Bang. Our myth offers answers these questions: Where are we? What are we? Why are we here? What are we to do? It also offers answers to a set of "why" questions: Why is there anything at all? and Why are there so many kinds of systems? - the answers coming from cosmology and physics (thermodynamics; Why do systems not last once they exist? - the answer coming from a materialist interpretation of information theory; and, Why are systems just the way they are and not otherwise? - the answer coming from evolutionary biology. We take into account the four kinds of causation designated by Aristotle as efficient, final, and material formal, with the Second Law of thermodynamics in the role of final cause. Conceptual problems concerning reductionism, "teleology", and the choice/chance distinction are dealt with in the framework of specification hierarchy, and the moral implications of our story explored in the conclusion.

  1. 3-D Printed Biocompatible Micro-Bellows Membranes

    KAUST Repository

    Moussi, Khalil; Kosel, Jü rgen

    2018-01-01

    for the development of integrated systems with novel capabilities as needed, for example, in advanced biomedical devices. Using a two-photon polymerization, 3-D printing technique, we present a high-resolution, high-yield, and customizable manufacturing process

  2. Plasma position control device

    International Nuclear Information System (INIS)

    Takase, Haruhiko.

    1987-01-01

    Purpose: To conduct position control stably to various plasmas and reduce the burden on the control coil power source. Constitution: Among the proportional, integration and differentiation controls, a proportional-differentiation control section and an integration control section are connected in parallel. Then, a signal switching circuit is disposed to the control signal input section for the proportional-differentiation control section such that either a present position of plasmas or deviation between the present plasma position and an aimed value can be selected as a control signal depending on the control procedures or the state of the plasmas. For instance, if a rapid response is required for the control, the deviation between the present plasma position and the aimed value is selected as the input signal to conduct proportional, integration and differentiation controls. While on the other hand, if it is intended to reduce the burden on the control coil power source, it is adapted such that the control signal inputted to the proportional-differentiation control section itself can select the present plasma position. (Yoshihara, H.)

  3. Uncharged positive electrode composition

    Science.gov (United States)

    Kaun, Thomas D.; Vissers, Donald R.; Shimotake, Hiroshi

    1977-03-08

    An uncharged positive-electrode composition contains particulate lithium sulfide, another alkali metal or alkaline earth metal compound other than sulfide, e.g., lithium carbide, and a transition metal powder. The composition along with a binder, such as electrolytic salt or a thermosetting resin is applied onto an electrically conductive substrate to form a plaque. The plaque is assembled as a positive electrode within an electrochemical cell opposite to a negative electrode containing a material such as aluminum or silicon for alloying with lithium. During charging, lithium alloy is formed within the negative electrode and transition metal sulfide such as iron sulfide is produced within the positive electrode. Excess negative electrode capacity over that from the transition metal sulfide is provided due to the electrochemical reaction of the other than sulfide alkali metal or alkaline earth metal compound.

  4. Position indication apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Masuda, T

    1964-02-24

    A plurality of magnetically operated switches are spaced equally in the hollow tube of a control rod actuating mechanism. One side of each switch is connected, via a low resistance, to a corresponding tap of a low resistance voltage divider network consisting of an equivalent number of low resistance sections with the opposite side of each switch connected to a common conducting wire A. To both ends of the voltage dividing network are connected, respectively, conducting wires B and C. Wires A, B, and C are further coupled to a fuel rod position indicator comprising a voltmeter and power source external to the control rod actuating member. The control rod actuating member is adapted to slide in the hollow tube so that switches passing a position facing a magnet secured to the lower end of the actuating member are rendered closed. Hence, the position of the control rod may be read by reading the voltage off the meter.

  5. Positioning devices for patients

    International Nuclear Information System (INIS)

    Heavens, M.

    1981-01-01

    It has been suggested that it is very important to position patients reproducibly at different stages of radiotherapy treatment planning and treatment, or similar procedures. Devices have been described for positioning a patient's upper and lower thorax. This invention provides reproducible positioning for a female patient's breasts, for example in planning treatment of and treating breast tumours. The patient is placed prone, using for example an upper thorax device. A support device is placed central to and beneath her breasts to partially displace them outwards. The device may be triangular in section with one apex contacting the chest wall at the sternum. Restraining straps may be provided to hold the breasts against the support device. Means may be provided to take a healthy breast from the path of radiation through the tumour. (author)

  6. Positioning and applications

    Directory of Open Access Journals (Sweden)

    Rogowski Jerzy B.

    2015-12-01

    Full Text Available The paper presents national report of Poland for IAG on positioning and applications. The selected research presented was carried out at leading Polish research institutions and concern precise multi-GNSS satellite positioning - relative and absolute - and also GNSS-based ionosphere and troposphere modelling and studies. The research resulted in noticeable advancements in these subjects confirmed by the development of new algorithms and methods. New and improved methods of precise GNSS positioning were developed, and also GNSS metrology was studied. New advanced troposphere models were presented and tested. In particular, these models allowed testing IPW variability on regional and global scales. Also, new regional ionosphere monitoring web-based services were developed and launched.

  7. Massive Galileon positivity bounds

    Science.gov (United States)

    de Rham, Claudia; Melville, Scott; Tolley, Andrew J.; Zhou, Shuang-Yong

    2017-09-01

    The EFT coefficients in any gapped, scalar, Lorentz invariant field theory must satisfy positivity requirements if there is to exist a local, analytic Wilsonian UV completion. We apply these bounds to the tree level scattering amplitudes for a massive Galileon. The addition of a mass term, which does not spoil the non-renormalization theorem of the Galileon and preserves the Galileon symmetry at loop level, is necessary to satisfy the lowest order positivity bound. We further show that a careful choice of successively higher derivative corrections are necessary to satisfy the higher order positivity bounds. There is then no obstruction to a local UV completion from considerations of tree level 2-to-2 scattering alone. To demonstrate this we give an explicit example of such a UV completion.

  8. Nucleosome Positioning and Epigenetics

    Science.gov (United States)

    Schwab, David; Bruinsma, Robijn

    2008-03-01

    The role of chromatin structure in gene regulation has recently taken center stage in the field of epigenetics, phenomena that change the phenotype without changing the DNA sequence. Recent work has also shown that nucleosomes, a complex of DNA wrapped around a histone octamer, experience a sequence dependent energy landscape due to the variation in DNA bend stiffness with sequence composition. In this talk, we consider the role nucleosome positioning might play in the formation of heterochromatin, a compact form of DNA generically responsible for gene silencing. In particular, we discuss how different patterns of nucleosome positions, periodic or random, could either facilitate or suppress heterochromatin stability and formation.

  9. Attitude and position tracking

    CSIR Research Space (South Africa)

    Candy, LP

    2011-01-01

    Full Text Available Several applications require the tracking of attitude and position of a body based on velocity data. It is tempting to use direction cosine matrices (DCM), for example, to track attitude based on angular velocity data, and to integrate the linear...

  10. Logotherapy and positive psychology

    Directory of Open Access Journals (Sweden)

    Oscar R. Oro

    2015-09-01

    Full Text Available Psychology omitted to approach, during almost a century, the positive aspects from persons, like creativity, humor, optimism, hope, forgiveness, life meaning, and happiness. These themes are approached by Positive Psychology, with Seligman like the principal exponent. Psychology was dedicated to explore the negative aspects from human beings improving human health. Nevertheless, this pathogenic model could not prevent mental disease. Concepts of Positive Psychology have a solid antecedent in Víktor Frankl ́s studies, which is the Logotherapy founder. This allows incorporating another perspective to approach positive aspects, from a philosophical and anthropological focus. Although the ways adopted by Frank and Seligman are different, both considered main aspects of human existence. Nevertheless, they investigated in different countries (from Europe and EE.UU.; in different circumstances (concentration camps, deaths, tortures; vs. academic context; in different historical periods and different social contexts (a country that lost the war and other that gave freedom to Europeans. In this work is used the concept life sense as the focus in professional formation and psychotherapy approach. 

  11. Delegation. Position Statement. Revised

    Science.gov (United States)

    Board, Connie; Bushmiaer, Margo; Davis-Alldritt, Linda; Fekaris, Nina; Morgitan, Judith; Murphy, M. Kathleen; Yow, Barbara

    2010-01-01

    It is the position of the National Association of School Nurses (NASN) that the delegation of nursing tasks in the school setting can be a valuable tool for the school nurse, when based on the nursing definition of delegation and in compliance with state nursing regulations and guidance. Delegation in school nursing is a complex process in which…

  12. Precise Point Positioning

    DEFF Research Database (Denmark)

    Zhang, Xiaohong

    the airborne lidar system misalignment angle by automating the matching of lidar data with ground truth. Kinematic GPS positioning has been widely used, but the available commercial software systems are normally only suitable for the short or medium range kinematic baseline. However, in polar areas, airborne...

  13. Positionality at the Center

    Directory of Open Access Journals (Sweden)

    Catherine Vanner

    2015-11-01

    Full Text Available As a Western feminist supporting and researching gender equality in education in postcolonial contexts, I often wonder: Am I doing more harm than good? The privilege of my social location means that my efforts to support education in postcolonial contexts risk being patronizing, insulting, threatening, imperialist, and recolonizing. Yet neglecting and ignoring postcolonial contexts similarly reflects and reproduces a privileged position. I provide a tentative framework designed to address positionality, power, and privilege while creating an ethical research process for working in a postcolonial context. Beginning with an identification of positionality, the objectives of research, and guiding theoretical frameworks to situate the research in relation to the participants and context, I proceed to establish a methodology designed to minimize the negative effects of power and maximize participants’ empowerment. I position myself as a bricoleur, layering feminist standpoint theory and postcolonial theory, and propose the collaborative data collection and analysis techniques, with particular attention to ethical and cultural sensitivity, using a social constructivist approach to grounded theory. This article highlights the need for Western researchers to reflect upon the power dynamics of their research in postcolonial contexts and develop a strategy for conducting empowering research that prevents the misrepresentation and exploitation of participants. Observations from my doctoral thesis data collection provide examples of how these concepts were operationalized in practice as well as reflections on the disconnect between theorizing and conducting ethical research in postcolonial contexts.

  14. Immunizations. Position Statement. Revised

    Science.gov (United States)

    Bobo, Nichole; Garrett, Jennifer; Teskey, Carmen; Duncan, Kay; Strasser, Kathy; Burrows-Mezu, Alicia L.

    2015-01-01

    It is the position of the National Association of School Nurses (NASN) that immunizations are essential to primary prevention of disease from infancy through adulthood. Promotion of immunizations by the registered professional school nurse (hereinafter referred to as school nurse) is central to the public health focus of school nursing practice…

  15. Net positive energy buildings

    International Nuclear Information System (INIS)

    Romero, A.; Barreiro, E.; Sanchez Zabala, V.

    2010-01-01

    Buildings are great consumers of energy, being responsible for almost 36% of CO2 emissions in Europe. Though there are many initiatives towards the reduction of energy consumption and CO2 emissions in buildings, many of the alternatives are diminished due to a lack of a unique and holistic approach to the problem. This paper reports a new innovative concept of Positive Energy Buildings (EB+), as well as an integral methodology that covers the overall design process for achieving them. The methodology evaluates energy efficiency solutions at different scales, from building site to generation systems. An educational building design in Navarra serves as a case study to check the feasibility of the proposed methodology. The study concludes that the key to achieve a Positive Energy Building is a minimized energy demand, complemented by efficient facilities and enhanced by distributed power generation from renewable sources. (Author).

  16. Conflict, Memory, and Positioning

    DEFF Research Database (Denmark)

    Brescó, Ignacio

    2016-01-01

    The aim of this paper was to bring the dialogical and multivoiced dimension of conflict to the fore in the study of how people remember a particular event in the past. Drawing from different case studies, it contains analyses of how subjects identifying with different political actors in the Basque...... conflict adopted their respective positions, and interpretation of the conflict, and how, in light of same, they reconstruct the failed peace process that took place in 2006 between the terrorist group ETA (Euzkadi ta Azcatasuna, or Basque Country and Freedom in English) and the Spanish government. Results...... show that the positioning adopted by participants gives rise to a certain form of interpreting the conflict, which, in turn, affects how the peace process is remembered. This occurs within a particular argumentative context in which each version constitutes an implicit response to a competing...

  17. Are Parton Distributions Positive?

    CERN Document Server

    Forte, Stefano; Ridolfi, Giovanni; Altarelli, Guido; Forte, Stefano; Ridolfi, Giovanni

    1999-01-01

    We show that the naive positivity conditions on polarized parton distributions which follow from their probabilistic interpretation in the naive parton model are reproduced in perturbative QCD at the leading log level if the quark and gluon distribution are defined in terms of physical processes. We show how these conditions are modified at the next-to-leading level, and discuss their phenomenological implications, in particular in view of the determination of the polarized gluon distribution

  18. Are parton distributions positive?

    International Nuclear Information System (INIS)

    Forte, Stefano; Altarelli, Guido; Ridolfi, Giovanni

    1999-01-01

    We show that the naive positivity conditions on polarized parton distributions which follow from their probabilistic interpretation in the naive parton model are reproduced in perturbative QCD at the leading log level if the quark and gluon distribution are defined in terms of physical processes. We show how these conditions are modified at the next-to-leading level, and discuss their phenomenological implications, in particular in view of the determination of the polarized gluon distribution

  19. Spatial Search, Position Papers

    OpenAIRE

    Center for Spatial Studies, UCSB

    2014-01-01

    The Spatial Search specialist meeting in Santa Barbara (December 2014) brought together 35 academic and industry representatives from computational, geospatial, and cognitive sciences with interest in focused discussions on the development of an interdisciplinary research agenda to advance spatial search from scientific and engineering viewpoints. The position papers from participants represent the shared expertise that guided discussions and the formulation of research questions about proces...

  20. Barebacking and sexual position

    OpenAIRE

    Grundy-Bowers, M.; Hardy, S.; McKeown, E.

    2015-01-01

    Bareback sex continues to fuel the HIV epidemic among men who have sex with men but despite the fact that much academic attention has been focused on the sexual behaviour of this population few authors have considered the significance of sexual position. In order to explore this relatively under-examined factor, interviews were conducted with 13 HIV-negative and unknown status gay men who had recently engaged in bareback sex. Using Interpretative Phenomenological Analysis and through the lens...

  1. The strategic research positioning:

    DEFF Research Database (Denmark)

    Viala, Eva Silberschmidt

    to provide new insights into ‘immigrant’ parents’ perspective on home/school partnership in Denmark. The majority of the immigrant parents came from non-Western countries, and they had already been ‘labelled’ difficult in terms of home/school partnership. This calls for what I call ‘strategic research...... positioning’, meaning critical reflections about the relationship and power balance between the researcher and the researched. The paper focus' on challenges and dilemmas linked to this position....

  2. Review of HRP Positions

    Energy Technology Data Exchange (ETDEWEB)

    Center for Reliability Studies

    2007-01-01

    The Department of Energy (DOE) Human Reliability Program (HRP), published as 10 CFR Part 712, is currently being reviewed and revised to address concerns identified during its implementation. Although these ''page changes'' primarily incorporate clarification of terms and language, the following discussion relates to broadening the definition of positions that require HRP certification that is found in {section}712.10.

  3. Position indicating device

    International Nuclear Information System (INIS)

    Fellchenfeld, M.M.; Connors, G.R.

    1987-01-01

    This patent describes a position indicating device for producing an indication of the position of a displaceable structure comprising: a position representing member mounted for movement in response to displacement of the structure; sensing elements spaced apart along the defined path such that each element is associated with a respective location along the defined path; means operatively coupling the elements into respective pairs of elements, having, for each pair of elements, an output producing a signal only when a single element of its respective pair is responding to the presence of the member; signal producing members each operative for producing a signal representing a predetermined logic state in response to a predetermined input signal, the number of the signal producing members being smaller than the number of the sensing elements; and circuit means operatively connecting the outputs to the signal producing members for causing a signal at each output to produce a predetermined input signal at a corresponding signal producing member and for causing a predetermined input signal to be produced at least one the signal producing member whenever a signal is present at either one of at least two of the outputs

  4. Photon beam position monitor

    Science.gov (United States)

    Kuzay, Tuncer M.; Shu, Deming

    1995-01-01

    A photon beam position monitor for use in the front end of a beamline of a high heat flux and high energy photon source such as a synchrotron radiation storage ring detects and measures the position and, when a pair of such monitors are used in tandem, the slope of a photon beam emanating from an insertion device such as a wiggler or an undulator inserted in the straight sections of the ring. The photon beam position monitor includes a plurality of spaced blades for precisely locating the photon beam, with each blade comprised of chemical vapor deposition (CVD) diamond with an outer metal coating of a photon sensitive metal such as tungsten, molybdenum, etc., which combination emits electrons when a high energy photon beam is incident upon the blade. Two such monitors are contemplated for use in the front end of the beamline, with the two monitors having vertically and horizontally offset detector blades to avoid blade "shadowing". Provision is made for aligning the detector blades with the photon beam and limiting detector blade temperature during operation.

  5. Beam Position Monitor Engineering

    International Nuclear Information System (INIS)

    Smith, Stephen R.

    1996-07-01

    The design of beam position monitors often involves challenging system design choices. Position transducers must be robust, accurate, and generate adequate position signal without unduly disturbing the beam. Electronics must be reliable and affordable, usually while meeting tough requirements on precision. accuracy, and dynamic range. These requirements may be difficult to achieve simultaneously, leading the designer into interesting opportunities for optimization or compromise. Some useful techniques and tools are shown. Both finite element analysis and analytic techniques will be used to investigate quasi-static aspects of electromagnetic fields such as the impedance of and the coupling of beam to striplines or buttons. Finite-element tools will be used to understand dynamic aspects of the electromagnetic fields of beams, such as wake-fields and transmission-line and cavity effects in vacuum-to-air feed through. Mathematical modeling of electrical signals through a processing chain will be demonstrated, in particular to illuminate areas where neither a pure time-domain nor a pure frequency-domain analysis is obviously advantageous. Emphasis will be on calculational techniques, in particular on using both time-domain and frequency domain approaches to the applicable parts of interesting problems

  6. Position reconstruction in LUX

    Science.gov (United States)

    Akerib, D. S.; Alsum, S.; Araújo, H. M.; Bai, X.; Bailey, A. J.; Balajthy, J.; Beltrame, P.; Bernard, E. P.; Bernstein, A.; Biesiadzinski, T. P.; Boulton, E. M.; Brás, P.; Byram, D.; Cahn, S. B.; Carmona-Benitez, M. C.; Chan, C.; Currie, A.; Cutter, J. E.; Davison, T. J. R.; Dobi, A.; Druszkiewicz, E.; Edwards, B. N.; Fallon, S. R.; Fan, A.; Fiorucci, S.; Gaitskell, R. J.; Genovesi, J.; Ghag, C.; Gilchriese, M. G. D.; Hall, C. R.; Hanhardt, M.; Haselschwardt, S. J.; Hertel, S. A.; Hogan, D. P.; Horn, M.; Huang, D. Q.; Ignarra, C. M.; Jacobsen, R. G.; Ji, W.; Kamdin, K.; Kazkaz, K.; Khaitan, D.; Knoche, R.; Larsen, N. A.; Lenardo, B. G.; Lesko, K. T.; Lindote, A.; Lopes, M. I.; Manalaysay, A.; Mannino, R. L.; Marzioni, M. F.; McKinsey, D. N.; Mei, D.-M.; Mock, J.; Moongweluwan, M.; Morad, J. A.; Murphy, A. St. J.; Nehrkorn, C.; Nelson, H. N.; Neves, F.; O'Sullivan, K.; Oliver-Mallory, K. C.; Palladino, K. J.; Pease, E. K.; Rhyne, C.; Shaw, S.; Shutt, T. A.; Silva, C.; Solmaz, M.; Solovov, V. N.; Sorensen, P.; Sumner, T. J.; Szydagis, M.; Taylor, D. J.; Taylor, W. C.; Tennyson, B. P.; Terman, P. A.; Tiedt, D. R.; To, W. H.; Tripathi, M.; Tvrznikova, L.; Uvarov, S.; Velan, V.; Verbus, J. R.; Webb, R. C.; White, J. T.; Whitis, T. J.; Witherell, M. S.; Wolfs, F. L. H.; Xu, J.; Yazdani, K.; Young, S. K.; Zhang, C.

    2018-02-01

    The (x, y) position reconstruction method used in the analysis of the complete exposure of the Large Underground Xenon (LUX) experiment is presented. The algorithm is based on a statistical test that makes use of an iterative method to recover the photomultiplier tube (PMT) light response directly from the calibration data. The light response functions make use of a two dimensional functional form to account for the photons reflected on the inner walls of the detector. To increase the resolution for small pulses, a photon counting technique was employed to describe the response of the PMTs. The reconstruction was assessed with calibration data including 83mKr (releasing a total energy of 41.5 keV) and 3H (β- with Q = 18.6 keV) decays, and a deuterium-deuterium (D-D) neutron beam (2.45 MeV) . Within the detector's fiducial volume, the reconstruction has achieved an (x, y) position uncertainty of σ = 0.82 cm and σ = 0.17 cm for events of only 200 and 4,000 detected electroluminescence photons respectively. Such signals are associated with electron recoils of energies ~0.25 keV and ~10 keV, respectively. The reconstructed position of the smallest events with a single electron emitted from the liquid surface (22 detected photons) has a horizontal (x, y) uncertainty of 2.13 cm.

  7. Positively deflected anomaly mediation

    International Nuclear Information System (INIS)

    Okada, Nobuchika

    2002-01-01

    We generalize the so-called 'deflected anomaly mediation' scenario to the case where threshold corrections of heavy messengers to the sparticle squared masses are positive. A concrete model realizing this scenario is also presented. The tachyonic slepton problem can be fixed with only a pair of messengers. The resultant sparticle mass spectrum is quite different from that in the conventional deflected anomaly mediation scenario, but is similar to the one in the gauge mediation scenario. The lightest sparticle is mostly B-ino

  8. Triangulation positioning system network

    Directory of Open Access Journals (Sweden)

    Sfendourakis Marios

    2017-01-01

    Full Text Available This paper presents ongoing work on localization and positioning through triangulation procedure for a Fixed Sensors Network - FSN.The FSN has to work as a system.As the triangulation problem becomes high complicated in a case with large numbers of sensors and transmitters, an adequate grid topology is needed in order to tackle the detection complexity.For that reason a Network grid topology is presented and areas that are problematic and need further analysis are analyzed.The Network System in order to deal with problems of saturation and False Triangulations - FTRNs will have to find adequate methods in every sub-area of the Area Of Interest - AOI.Also, concepts like Sensor blindness and overall Network blindness, are presented. All these concepts affect the Network detection rate and its performance and ought to be considered in a way that the network overall performance won’t be degraded.Network performance should be monitored contentiously, with right algorithms and methods.It is also shown that as the number of TRNs and FTRNs is increased Detection Complexity - DC is increased.It is hoped that with further research all the characteristics of a triangulation system network for positioning will be gained and the system will be able to perform autonomously with a high detection rate.

  9. Positive void reactivity

    International Nuclear Information System (INIS)

    Diamond, D.J.

    1992-09-01

    This report is a review of some of the important aspects of the analysis of large loss-of-coolant accidents (LOCAs). One important aspect is the calculation of positive void reactivity. To study this subject the lattice physics codes used for void worth calculations and the coupled neutronic and thermal-hydraulic codes used for the transient analysis are reviewed. Also reviewed are the measurements used to help validate the codes. The application of these codes to large LOCAs is studied with attention focused on the uncertainty factor for the void worth used to bias the results. Another aspect of the subject dealt with in the report is the acceptance criteria that are applied. This includes the criterion for peak fuel enthalpy and the question of whether prompt criticality should also be a criterion. To study the former, fuel behavior measurements and calculations are reviewed. (Author) (49 refs., 2 figs., tab.)

  10. Conference - La discipline positive

    CERN Multimedia

    Staff Association

    2018-01-01

    Eduquer avec fermeté et bienveillance Véronique Genevay Jeudi 31 mai à 19h00 CERN Meyrin, Salle du Conseil 503-1-001 Venez vous familiariser avec la pensée et le positionnement développé dans la discipline positive. Une approche ni permissive, ni punitive, qui vise à enseigner aux enfants des compétences comme la confiance en soi, l’autonomie, le respect de soi-même et le respect mutuel, la responsabilité, la coopération… Inscrivez-vous : https://indico.cern.ch/e/disciplinepositive   Pour plus d’informations : staff.association@cern.ch ou (+41) 022 766 37 38

  11. Position paper on mesotherapy.

    Science.gov (United States)

    Sarkar, Rashmi; Garg, Vijay Kumar; Mysore, Venkataram

    2011-01-01

    Mesotherapy is a controversial cosmetic procedure which has received publicity among the lay people, in the internet and in the media. It refers to minimally invasive techniques which consist of the use of intra- or subcutaneous injections containing liquid mixture of compounds (pharmaceutical and homeopathic medications, plant extracts, vitamins and other ingredients) to treat local medical and cosmetic conditions. This position paper has examined the available evidence and finds that acceptable scientific evidence for its effectiveness and safety is lacking. IADVL taskforce, therefore would like to state that the use of this technique remains controversial at present. Further research and well-designed controlled scientific studies are required to substantiate the claims of benefit of this mode of therapy.

  12. Position paper on mesotherapy

    Directory of Open Access Journals (Sweden)

    Rashmi Sarkar

    2011-01-01

    Full Text Available Mesotherapy is a controversial cosmetic procedure which has received publicity among the lay people, in the internet and in the media. It refers to minimally invasive techniques which consist of the use of intra- or subcutaneous injections containing liquid mixture of compounds (pharmaceutical and homeopathic medications, plant extracts, vitamins and other ingredients to treat local medical and cosmetic conditions. This position paper has examined the available evidence and finds that acceptable scientific evidence for its effectiveness and safety is lacking. IADVL taskforce, therefore would like to state that the use of this technique remains controversial at present. Further research and well-designed controlled scientific studies are required to substantiate the claims of benefit of this mode of therapy.

  13. Galileo positioning technology

    CERN Document Server

    Lohan, Elena; Sand, Stephan; Hurskainen, Heikki

    2015-01-01

    This book covers multi-band Galileo receivers (especially E1-E5 bands of Galileo) and addresses all receiver building blocks, from the antenna and front end, through details of the baseband receiver processing blocks, up to the navigation processing, including the Galileo message structure and Position, Velocity, Time (PVT) computation. Moreover, hybridization solutions with communications systems for improved localization are discussed and an open-source GNSS receiver platform (available for download) developed at Tampere University of Technology (TUT) is addressed in detail. • Takes a holistic approach to GALILEO and related systems, such as EGNOS and hybrid solutions on mobile phones; • Provides an invaluable reference to Binary Offset Carrier modulations and related families, which are some of the trademarks of GALILEO; • Includes a detailed survey of GALILEO receiver research in Europe and existing software-defined radio (SDR) GALILEO receiver implementations; • Addresses the multiple challen...

  14. ISSP Position Stand

    DEFF Research Database (Denmark)

    Ryba, Tatiana; Stambulova, Natalia; Si, Gangyan

    2013-01-01

    The multicultural landscape of contemporary sport sets a challenge to rethink sport and exercise psychology research and practice through a culturally re␣exive lens. This ISSP Position Stand provides a rigorous synthesis and engagement with existing scholarship to outline a roadmap for future work...... in the ␣eld. The shift to culturally competent sport and exercise psychology implies: (a) recognizing hidden ethnocentric philosophical assumptions permeating much of the current theory, research, and practice; (b) transitioning to professional ethics in which difference is seen as not inherent and ␣xed...... but as relational and ␣uid; and (c) focusing on meaning (instead of cause) in cross-cultural and cultural research projects, and cultural praxis work. In the paper, we ␣rst provide an overview of the concepts of cultural competence and ethics of difference. Second, we present a step-by-step approach for developing...

  15. The Power of Positive Emotions

    Science.gov (United States)

    ... Safe Videos for Educators Search English Español The Power of Positive Emotions KidsHealth / For Teens / The Power ... great one. 2. Practice Positivity Every Day Building habits that encourage us to feel more positive emotions ...

  16. Detecting positive quadrant dependence and positive function dependence

    NARCIS (Netherlands)

    Janic-Wróblewska, A.; Kallenberg, W.C.M.; Ledwina, T.

    2004-01-01

    There is a lot of interest in positive dependence going beyond linear correlation. In this paper three new rank tests for testing independence against positive dependence are introduced. The first one is directed on positive quadrant dependence, the second and third one concentrate on positive

  17. Detecting positive quadrant dependence and positive function dependence

    NARCIS (Netherlands)

    Janic-Wróblewska, A.; Kallenberg, W.C.M.; Ledwina, T.

    2003-01-01

    There is a lot of interest in positive dependence going beyond linear correlation. In this paper three new rank tests for testing independence against positive dependence are introduced. The first one is directed on positive quadrant dependence, the second and third one concentrate on positive

  18. Relationship of condylar position to disc position and morphology

    Energy Technology Data Exchange (ETDEWEB)

    Incesu, L.; Taskaya-Yilmaz, N. E-mail: nergizy@omu.edu.tr; Oeguetcen-Toller, M.; Uzun, E

    2004-09-01

    Introduction/objective: The purpose of this study was to assess whether condylar position, as depicted by magnetic resonance imaging, was an indicator of disc morphology and position. Methods and material: One hundred and twenty two TMJs of 61 patients with temporomandibular joint disorder were examined. Condylar position, disc deformity and degree of anterior disc displacement were evaluated by using magnetic resonance imaging. Results and discussion: Posterior condyle position was found to be the main feature of temporomandibular joints with slight and moderate anterior disc displacement. No statistical significance was found between the condylar position, and reducing and nonreducing disc positions. On the other hand, superior disc position was found to be statistically significant for centric condylar position. Conclusion: It was concluded that posterior condyle position could indicate anterior disc displacement whereas there was no relation between the position of condyle and the disc deformity.

  19. SQUID position sensor development

    Science.gov (United States)

    Torii, Rodney

    1996-11-01

    I describe the development of an inductance position sensor for the STEP (satellite test of the equivalence principle) accelerometer. I have measured the inductance (with an experimental error of 0.5%) of a single-turn thin-film niobium pick-up coil as a function of the distance from a thin-film niobium disc (both at 4.2 K and superconducting). The circular pick-up coil had a diameter of 4 cm with a track width of 0264-9381/13/11A/022/img1. The disc (mock test mass) had a diameter of 4 cm. The distance range between the coil and disc was set by the range of a low-temperature differential capacitance sensor: 0 - 2 mm with a resolution of 0264-9381/13/11A/022/img2. The full range of the low-temperature translation stage was 0 - 4 mm. The inductance was measured using an LCR meter in a four-wire configuration. The measured inductance was compared to the inductance of a circular loop above a superconducting plane. Due to the fact that the thin-film disc is of finite size, the calculation differed from experiment by as much as 12%. I have also calculated the inductance by segmenting the thin-film niobium disc into 500 concentric rings (each with a width of 0264-9381/13/11A/022/img3). A discrepancy between calculation and experiment of approximately 3% was found.

  20. Gathering positive experience

    CERN Document Server

    2009-01-01

    Last Monday, the new CERN Machine Advisory Committee (CMAC) met for the first time, and we had good news to tell its members. Over the weekend, injection tests for both LHC beams were successfully carried out. In other words, we’ve had beam in the LHC for the first time since September 2008. That’s a good feeling, but it’s no reason for complacency. There’s still a long way to go before first physics at the new energy frontier. As the Bulletin has reported over recent weeks, we’re gathering a lot of positive experience with the new quench detection and protection system (QPS), which is already allowing us to monitor the LHC far better than we were able to in the past. So far, the QPS for three of the LHC’s eight sectors has been put through its paces, and we’ve also power tested those sectors to 2000 amperes, the equivalent of around 1.2 TeV per beam. The next step is to slowly increase the current to 4000 amperes, and...

  1. Climate change policy position

    International Nuclear Information System (INIS)

    2002-11-01

    The Canadian Association of Petroleum Producers (CAPP) is a firm believer in the need to take action to mitigate the risks associated with climate change, and that clear government policy is called for. The principles of sustainable development must guide this policy development effort. The initiatives required to address greenhouse gas emissions over both the short and long term must be carefully considered, and it is up to industries to ensure their production efficiency and emission intensity. Promoting improved performance of industries in Canada and developing technology that can be deployed internationally for larger global effects represents Canada's best contribution to progress on greenhouse gas emissions. The increase in energy demand along with increases in population and economic growth have contributed to an increase in greenhouse gas emissions despite improved energy efficiency in industry. Significant damage to the economy will result if Canada is to meet its commitment under the Kyoto Protocol, forcing the country to buy large quantities of foreign credits instead of using those funds for increased research and development. CAPP indicated that an effective plan must be: balanced, equitable, responsible, competitive, focused on technology and innovation, and based on agreements on sectoral plans. Each of these principles were discussed, followed by the fundamentals of approach for upstream oil and gas. The framework for climate change policy was described as well as the elements of a sector plan. CAPP wants to work with all levels of government on an appropriate plan for Canada, that considers our unique circumstances. Canada can play a significant role on the international stage by properly implementing the policy position proposed by the CAPP without unnecessary risks to the economy. refs

  2. Exposing Position Uncertainty in Middleware

    DEFF Research Database (Denmark)

    Langdal, Jakob; Kjærgaard, Mikkel Baun; Toftkjær, Thomas

    2010-01-01

    Traditionally, the goal for positioning middleware is to provide developers with seamless position transparency, i.e., providing a connection between the application domain and the positioning sensors while hiding the complexity of the positioning technologies in use. A key part of the hidden com...

  3. Thruster allocation for dynamical positioning

    NARCIS (Netherlands)

    Poppe, K.; van den Berg, J.B.; Blank, E.; Archer, C.; Redeker, M.; Kutter, M.; Hemker, P.

    2010-01-01

    Positioning a vessel at a fixed position in deep water is of great importance when working offshore. In recent years a Dynamical Positioning (DP) system was developed at Marin [2]. After the measurement of the current position and external forces (like waves, wind etc.), each thruster of the vessel

  4. Positive Technologies for Understanding and Promoting Positive Emotions.

    Science.gov (United States)

    Baños, Rosa María; Carrillo, Alba; Etchemendy, Ernestina; Botella, Cristina

    2017-10-26

    Information and Communication Technologies (ICTs) have become increasingly present in our lives, and their use has spread considerably. This paper presents a review of the way ICTs can help practitioners and researchers to study, promote, and train positive emotions. It is framed within the field of Positive Technologies: the applied scientific approach to the study of the use of technology to improve the quality of personal experience, with the goal of increasing wellbeing. First, the article presents an introduction to the topic of technologies and positive emotions. Then, it describes how ICTs can aid in monitoring, assessing, promoting, modifying, and training positive emotions. Finally, implications and future directions of the role of Positive Technologies in positive emotions are discussed. The authors conclude that, in the near future, Positive Technologies and the field of positive emotions will interact synergistically, producing an exponential growth in the understanding and promotion of positive emotions.

  5. Secure positioning in wireless networks

    DEFF Research Database (Denmark)

    Capkun, Srdjan; Hubaux, Jean-Pierre

    2006-01-01

    So far, the problem of positioning in wireless networks has been studied mainly in a non-adversarial settings. In this work, we analyze the resistance of positioning techniques to position and distance spoofing attacks. We propose a mechanism for secure positioning of wireless devices, that we call...... Verifiable Multilateration. We then show how this mechanism can be used to secure positioning in sensor networks. We analyze our system through simulations....

  6. Position detectors, methods of detecting position, and methods of providing positional detectors

    Science.gov (United States)

    Weinberg, David M.; Harding, L. Dean; Larsen, Eric D.

    2002-01-01

    Position detectors, welding system position detectors, methods of detecting various positions, and methods of providing position detectors are described. In one embodiment, a welding system positional detector includes a base that is configured to engage and be moved along a curved surface of a welding work piece. At least one position detection apparatus is provided and is connected with the base and configured to measure angular position of the detector relative to a reference vector. In another embodiment, a welding system positional detector includes a weld head and at least one inclinometer mounted on the weld head. The one inclinometer is configured to develop positional data relative to a reference vector and the position of the weld head on a non-planar weldable work piece.

  7. False Position, Double False Position and Cramer's Rule

    Science.gov (United States)

    Boman, Eugene

    2009-01-01

    We state and prove the methods of False Position (Regula Falsa) and Double False Position (Regula Duorum Falsorum). The history of both is traced from ancient Egypt and China through the work of Fibonacci, ending with a connection between Double False Position and Cramer's Rule.

  8. Positive Psychology and Positive Education: Old Wine in New Bottles?

    Science.gov (United States)

    Kristjansson, Kristjan

    2012-01-01

    The recently fashionable theories of positive psychology have educational ramifications at virtually every level of engagement, culminating in the model of positive education. In this critical review, I scrutinize positive education as a potential theory in educational psychology. Special attention is given to conceptual controversies and…

  9. Continuous Positive Airway Pressure (CPAP)

    Science.gov (United States)

    ... ENT Doctor Near You Continuous Positive Airway Pressure (CPAP) Continuous Positive Airway Pressure (CPAP) Patient Health Information ... relations staff at newsroom@entnet.org . What Is CPAP? The most common and effective nonsurgical treatment for ...

  10. Collective Behaviour: Physiology Determines Position.

    Science.gov (United States)

    Krause, Jens; Seebacher, Frank

    2018-04-23

    An animal's position within a group affects feeding - front positions generally offer richer pickings. However, a new study shows that position can be influenced by feeding because big meals reduce scope for locomotion. Crown Copyright © 2018. Published by Elsevier Ltd. All rights reserved.

  11. Introducing Positive Psychology to SLA

    Science.gov (United States)

    MacIntyre, Peter D.; Mercer, Sarah

    2014-01-01

    Positive psychology is a rapidly expanding subfield in psychology that has important implications for the field of second language acquisition (SLA). This paper introduces positive psychology to the study of language by describing its key tenets. The potential contributions of positive psychology are contextualized with reference to prior work,…

  12. Navicular bone position determined by positional MRI: a reproducibility study

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, Philip; Nybing, Janus D. [Copenhagen University Hospital Frederiksberg and Bispebjerg, Department of Radiology, Frederiksberg (Denmark); Johannsen, Finn E.; Stallknecht, Sandra E. [Copenhagen University Hospital Bispebjerg, Institute of Sports Medicine Copenhagen, Copenhagen, NV (Denmark); Hangaard, Stine; Hansen, Bjarke B. [Copenhagen University Hospital Frederiksberg, Parker Institute, Department of Rheumatology, Frederiksberg (Denmark); Boesen, Mikael [Copenhagen University Hospital Frederiksberg and Bispebjerg, Department of Radiology, Frederiksberg (Denmark); Copenhagen University Hospital Frederiksberg, Parker Institute, Department of Rheumatology, Frederiksberg (Denmark)

    2016-02-15

    To examine intraobserver, interobserver and between-day reproducibility of positional MRI for evaluation of navicular bone height (NVH) and medial navicular position (MNP). Positional MRI (pMRI) of the foot was performed on ten healthy participants (0.25 T G-scanner). Scanning was performed in supine and standing position, respectively. Two radiologists evaluated the images in a blinded manner. Reliability and agreement were assessed by calculation of intraclass correlation coefficient (ICC) and 95 % limits of agreement as a percentage of the mean (LOA%). Intraobserver and interobserver reliability was ''substantial'' in both supine and standing position (ICC 0.86-0.98) and showed good agreement (LOA% 4.9-14.7 %). Between-day reliability of navicular height and medial navicular position in standing position remained substantial (ICC 0.85-0.92) with adequate agreement (LOA% 8.3-19.8 %). In supine position between-day reliability was ''moderate'' for NVH (ICC 0.72) and ''slight'' for MNP (ICC 0.39). Agreement remained adequate between-days for MNP in supine position (LOA% 17.7 %), but it was less than adequate for NVH in supine position (LOA% 24.2 %). Navicular height and medial navicular position can be measured by pMRI in a very reproducible manner within and between observers. Increased measurement variation is observed between-days in supine position, which may be due to small positional differences or other unknown biomechanical factors. (orig.)

  13. Navicular bone position determined by positional MRI: a reproducibility study

    International Nuclear Information System (INIS)

    Hansen, Philip; Nybing, Janus D.; Johannsen, Finn E.; Stallknecht, Sandra E.; Hangaard, Stine; Hansen, Bjarke B.; Boesen, Mikael

    2016-01-01

    To examine intraobserver, interobserver and between-day reproducibility of positional MRI for evaluation of navicular bone height (NVH) and medial navicular position (MNP). Positional MRI (pMRI) of the foot was performed on ten healthy participants (0.25 T G-scanner). Scanning was performed in supine and standing position, respectively. Two radiologists evaluated the images in a blinded manner. Reliability and agreement were assessed by calculation of intraclass correlation coefficient (ICC) and 95 % limits of agreement as a percentage of the mean (LOA%). Intraobserver and interobserver reliability was ''substantial'' in both supine and standing position (ICC 0.86-0.98) and showed good agreement (LOA% 4.9-14.7 %). Between-day reliability of navicular height and medial navicular position in standing position remained substantial (ICC 0.85-0.92) with adequate agreement (LOA% 8.3-19.8 %). In supine position between-day reliability was ''moderate'' for NVH (ICC 0.72) and ''slight'' for MNP (ICC 0.39). Agreement remained adequate between-days for MNP in supine position (LOA% 17.7 %), but it was less than adequate for NVH in supine position (LOA% 24.2 %). Navicular height and medial navicular position can be measured by pMRI in a very reproducible manner within and between observers. Increased measurement variation is observed between-days in supine position, which may be due to small positional differences or other unknown biomechanical factors. (orig.)

  14. Polyurethane - positioning aids in radiotherapy

    International Nuclear Information System (INIS)

    Alzen, G.; Boeck, E.G.; Thelen, M.; Kutzner, J.

    1985-01-01

    A simple and cheap method is described for the manufacturing of individual positioning aids made of foamed polyurethane. Some examples are given to demonstrate the applicability of these positioning aids for the irradiation of different body regions. The reproducibility of the radiation field in the head and neck area was investigated with and without positioning aid. It was proved that the field is adjusted more exactly when positioning aids are applied. The dosimetric investigations performed showed a negligible influence of foamed polyurethane on the radiation quality. So the positioning aids could be left within the radiation field when drawing the field borders. (orig.) [de

  15. The false positive exercise test

    International Nuclear Information System (INIS)

    Moritani, Kohshiro; Matsuda, Yasuo; Ozaki, Masaharu; Ogawa, Hiroshi; Ichiyama, Masaji; Matsuda, Masako; Kusukawa, Reizo

    1986-01-01

    Exercise tests with sublingual nitroglycerin were performed on 7 patients with true positive and 8 patients with false positive exercise test results. Four of 7 patients with true positive changes and 8 patients with false positive changes underwent exercise cardiac scintigraphy. Scintigrams showed perfusion defects in 4 patients with true positive outcomes, and no perfusion defect in 8 patients with false positive outcomes. Exercise tests with sublingual nitroglycerin were performed with the same load as that without nitroglycerin. In all 7 patients with true positive exercise test results, ST segment depression observed in the control exercise test was not observed in the nitroglycerin exercise test. In the false positive patients, ST segment depression observed in the control exercise test remained unchanged in 7 of 8 patients receiving nitroglycerin. Exercise tests with sublingual nitroglycerin as well as exercise cardiac scintigraphy are valuable tods in differentiating false positive from true positive patients. Furthermore, these data suggest that ST segment depression in the false positive patients may not be related to myocardial ischemia. (author)

  16. A Sleep Position Trainer for positional sleep apnea

    DEFF Research Database (Denmark)

    Laub, Rasmus R; Tønnesen, Philip; Jennum, Poul J

    2017-01-01

    We tested the effect of the Sleep Position Trainer, a vibrational device, for positional sleep apnea in an open, randomized controlled trial with 101 patients, where 52 patients were allocated to Sleep Position Trainer and 49 patients to a non-treatment control group for 2 months (Part 1). All...... patients were then followed as a cohort for a period of 6 months with use of the Sleep Position Trainer (Part 2). The participants were assessed with polygraphy at entry, and after 2 and 6 months. The mean apnea-hypopnea index supine was 35 per h (SD, 18) in the Sleep Position Trainer group and 38 per h...... (SD, 15) in the control group at entry. In a per protocol analysis, the mean total apnea-hypopnea index at entry and after 2 months in the Sleep Position Trainer group was 18 per h (SD, 10) and 10 per h (SD, 9; P

  17. Are positive emotions just as "positive" across cultures?

    Science.gov (United States)

    Leu, Janxin; Wang, Jennifer; Koo, Kelly

    2011-08-01

    Whereas positive emotions and feeling unequivocally good may be at the heart of well-being among Westerners, positive emotions often carry negative associations within many Asian cultures. Based on a review of East-West cultural differences in dialectical emotions, or co-occurring positive and negative feelings, we predicted culture to influence the association between positive emotions and depression, but not the association between negative emotions and depression. As predicted, in a survey of over 600 European-, immigrant Asian-, and Asian American college students, positive emotions were associated with depression symptoms among European Americans and Asian Americans, but not immigrant Asians. Negative emotions were associated with depression symptoms among all three groups. We also found initial evidence that acculturation (i.e., nativity) may influence the role of positive emotions in depression: Asian Americans fell "in between" the two other groups. These findings suggest the importance of studying the role of culture in positive emotions and in positive psychology. The use of interventions based on promoting positive emotions in clinical psychology among Asian clients is briefly discussed. 2011 APA, all rights reserved

  18. Positive mood broadens visual attention to positive stimuli.

    Science.gov (United States)

    Wadlinger, Heather A; Isaacowitz, Derek M

    2006-03-01

    In an attempt to investigate the impact of positive emotions on visual attention within the context of Fredrickson's (1998) broaden-and-build model, eye tracking was used in two studies to measure visual attentional preferences of college students (n=58, n=26) to emotional pictures. Half of each sample experienced induced positive mood immediately before viewing slides of three similarly-valenced images, in varying central-peripheral arrays. Attentional breadth was determined by measuring the percentage viewing time to peripheral images as well as by the number of visual saccades participants made per slide. Consistent with Fredrickson's theory, the first study showed that individuals induced into positive mood fixated more on peripheral stimuli than did control participants; however, this only held true for highly-valenced positive stimuli. Participants under induced positive mood also made more frequent saccades for slides of neutral and positive valence. A second study showed that these effects were not simply due to differences in emotional arousal between stimuli. Selective attentional broadening to positive stimuli may act both to facilitate later building of resources as well as to maintain current positive affective states.

  19. Accentuate the Positive: Positive Sentiments and Status in Task Groups

    Science.gov (United States)

    Bianchi, Alison J.; Lancianese, Donna A.

    2007-01-01

    We explore the capacity of positive sentiments, those enduring affective states one achieves when one likes another, to impact status structures. Do positive sentiments combine with existing aspects of interaction to create status hierarchies and potentially change the social order, or do they moderate the effects of extant structure by dampening…

  20. Workaholism as positive social deviance

    OpenAIRE

    Belousov, Konstantin

    2014-01-01

    The article justifies a potential research of workaholism as a social phenomenon within the positive deviance approach. In this paper, the authors provide definitions of positive deviance by foreign and Russian scholars as well as analyse how such behaviors depart from the norms of a referent group and adduce a number of studies positively assessing the concept. Finally, the authors conclude that workaholism can be regarded as a supraconformal behavior that can boost economic, cultural and sc...

  1. CDDIS_VLBI_products_positions

    Data.gov (United States)

    National Aeronautics and Space Administration — Station positions and velocity solutions in Software INdependent EXchange (SINEX) format derived from analysis of Very Long Baseline Interferometry (VLBI) data....

  2. Variable-Position Acoustic Levitation

    Science.gov (United States)

    Barmatz, M. B.; Stoneburner, J. D.; Jacobi, N.; Wang, T. G.

    1983-01-01

    Method of acoustic levitation supports objects at positions other than acoustic nodes. Acoustic force is varied so it balances gravitational (or other) force, thereby maintaining object at any position within equilibrium range. Levitation method applicable to containerless processing. Such objects as table-tennis balls, hollow plastic spheres, and balsa-wood spheres levitated in laboratory by new method.

  3. Control rod position control device

    International Nuclear Information System (INIS)

    Ubukata, Shinji.

    1997-01-01

    The present invention provides a control rod position control device which stores data such as of position signals and driving control rod instruction before and after occurrence of abnormality in control for the control rod position for controlling reactor power and utilized the data effectively for investigating the cause of abnormality. Namely, a plurality of individual control devices have an operation mismatching detection circuit for outputting signals when difference is caused between a driving instruction given to the control rod position control device and the control rod driving means and signals from a detection means for detecting an actual moving amount. A general control device collectively controls the individual control devices. In addition, there is also disposed a position storing circuit for storing position signals at least before and after the occurrence of the control rod operation mismatching. With such procedures, the cause of the abnormality can be determined based on the position signals before and after the occurrence of control rod mismatching operation stored in the position storing circuit. Accordingly, the abnormality cause can be determined to conduct restoration in an early stage. (I.S.)

  4. Positive Psychology and Career Development

    Science.gov (United States)

    Robertson, Peter J.

    2018-01-01

    Positive psychology has been an influential movement within psychology in the early years of the twenty-first century. It is now timely to assess the value of its contribution to career education and guidance. This paper provides a critique of this perspective. Positive psychology can enrich approaches to career development. It can provide a…

  5. Indoor Positioning System using Bluetooth

    OpenAIRE

    Sahil Puri

    2015-01-01

    This Paper on Bluetooth Indoor Positioning System is the intersection of Bluetooth Technology and Indoor Positioning Systems. Almost every smartphone today is Bluetooth enabled, making the use of the technology more flexible. We aim at using the RSSI value of Bluetooth signals to track the location of a device.

  6. Positioning intermediary organisations in innovation

    NARCIS (Netherlands)

    Lente, van H.; Boon, W.P.C.; Klerkx, L.W.A.

    2010-01-01

    Abstract: Intermediary organisations are important in innovation systems and their contributions seem to increase. The central ambition of this paper is to understand and analyse the position of intermediaries within innovation networks. We use so-called positioning theory, where roles are outcomes

  7. Signature Strengths in Positive Psychology

    Science.gov (United States)

    Molony, Terry; Henwood, Maureen

    2010-01-01

    Positive psychology can be thought of as the scientific study of what is "right about people" as opposed to the traditional focus on the healing of psychological pain or trauma. The philosophical roots of positive psychology can be traced back to Confucianism, Taoism, Buddhism, Hinduism, Judaism, Christianity, as well as Islamic and Athenian…

  8. Positive Parenting and Challenging Children

    Science.gov (United States)

    Knoll, Melissa

    2007-01-01

    Positive parenting focuses on developing proactive ways to teach and reinforce desirable behaviors, as opposed to focusing on reacting to and attempting to decrease negative behaviors. Dr. Sheldon Braaten, Executive Director of Behavioral Institute for Children and Adolescents, offers some keys for setting up and using a positive reinforcement…

  9. Manifolds of positive scalar curvature

    Energy Technology Data Exchange (ETDEWEB)

    Stolz, S [Department of Mathematics, University of Notre Dame, Notre Dame (United States)

    2002-08-15

    This lecture gives an survey on the problem of finding a positive scalar curvature metric on a closed manifold. The Gromov-Lawson-Rosenberg conjecture and its relation to the Baum-Connes conjecture are discussed and the problem of finding a positive Ricci curvature metric on a closed manifold is explained.

  10. Fluid Expulsion, Habitability, and the Search for Life on Mars

    Science.gov (United States)

    Oehler, Dorothy Z.; Allen, Carlton C.

    2012-01-01

    Habitability assessments are critical for identifying settings in which potential biosignatures could exist in quantities large enough to be detected by rovers. Habitability depends on 1) the potential for long-lived liquid water, 2) conditions affording protection from surface processes destructive to organic biomolecules, and 3) a source of renewing nutrients and energy. Of these criteria, the latter is often overlooked. Here we present an analysis of a large "ghost" crater in northern Chryse Planitia [1] that appears to have satisfied each of these requirements, with several processes providing potential sources of nutrient/energy renewal [1-2]. This analysis can serve as a model for identifying other localities that could provide similarly favorable settings in which to seek evidence of life on Mars.

  11. MEDICAL EXPULSIVE THERAPY OF URETERIC CALCULI - OUR EXPERIENCE

    Directory of Open Access Journals (Sweden)

    Ramesh

    2015-09-01

    Full Text Available INTRODUCTION: Uretric stones can be treated with multiple modalities including medical therapy, uretroscopy, shockwave lithotripsy (SWS, percutaneous nephrolithotomy, open/laparoscopic stone removal, and/or combinations of these modalities. The aim is to study the effectivene ss of medical management of uretric stones and to compare the effectiveness of Tamsulosin and Tamsulosin with steroid . MATERIALS & METHODS: 120 Patients who came with acute uretric colic were categorized into III categories of less than 5mm, 5mm to 7mm and more than 7mm based on NCCT. They were consecutively allotted to one of the three groups, the group I patients received Anti - Biotics with NSAIDs group II received Tamsulosin in addition Anti - Biotics and NSAIDs and III rd group received Anti - Biotics, Tamsu losin, NSAIDs in addition Deflazacart 30mg for a period of 10 days. The results were evaluated at the end of 10 days medical treatment. RESULTS : 90 out of 120 patients were re - evaluated at the end of 10 days. The calculi of 7mm should be removed as the chances of passage is <20%. The medical treatment with Tamsulosin or Tamsulosin with Deflazacart does not offer significant benefit.

  12. Introducing positive psychology to SLA

    Directory of Open Access Journals (Sweden)

    Sarah Mercer

    2014-01-01

    Full Text Available Positive psychology is a rapidly expanding subfield in psychology that has important implications for the field of second language acquisition (SLA. This paper introduces positive psychology to the study of language by describing its key tenets. The potential contributions of positive psychology are contextualized with reference to prior work, including the humanistic movement in language teaching, models of motivation, the concept of an affective filter, studies of the good language learner, and the concepts related to the self. There are reasons for both encouragement and caution as studies inspired by positive psychology are undertaken. Papers in this special issue of SSLLT cover a range of quantitative and qualitative methods with implications for theory, research, and teaching practice. The special issue serves as a springboard for future research in SLA under the umbrella of positive psychology.

  13. THE LIMITS OF POSITIVE INTERVENTIONS

    Directory of Open Access Journals (Sweden)

    Gonzalo Hervás

    2017-01-01

    Full Text Available Positive interventions have been developed extensively in recent years and they have been tested and applied in very diverse settings. Despite the fact that most of the findings regarding their efficacy can be considered from positive to very positive, the possibility that, in some cases, positive interventions may have unexpected or even iatrogenic effects cannot be discarded. In this article, research from several sources is reviewed in order to inform decisions about what interventions might be inadequate for cases with specific characteristics or vulnerability traits. Finally, the importance of using positive interventions with caution and rigor even when working with individuals who do not have overt problems or psychological disorders is discussed.

  14. Positivity VII (Zaanen Centennial Conference)

    CERN Document Server

    Pagter, Ben; Gaans, Onno; Veraar, Mark

    2016-01-01

    This book presents the proceedings of Positivity VII, held from 22-26 July 2013, in Leiden, the Netherlands. Positivity is the mathematical field concerned with ordered structures and their applications in the broadest sense of the word. A biyearly series of conferences is devoted to presenting the latest developments in this lively and growing discipline. The lectures at the conference covered a broad spectrum of topics, ranging from order-theoretic approaches to stochastic processes, positive solutions of evolution equations and positive operators on vector lattices, to order structures in the context of algebras of operators on Hilbert spaces. The contributions in the book reflect this variety and appeal to university researchers in functional analysis, operator theory, measure and integration theory and operator algebras. Positivity VII was also the Zaanen Centennial Conference to mark the 100th birth year of Adriaan Cornelis Zaanen, who held the chair of Analysis in Leiden for more than 25 years and was ...

  15. MHSP with position detection capability

    Energy Technology Data Exchange (ETDEWEB)

    Natal da Luz, H. [Physics Dept., University of Aveiro, 3810-193 Aveiro (Portugal); Physics Dept., University of Coimbra, 3004-516 Coimbra (Portugal); Veloso, J.F.C.A. [Physics Dept., University of Aveiro, 3810-193 Aveiro (Portugal) and Physics Dept., University of Coimbra, 3004-516 Coimbra (Portugal)]. E-mail: jveloso@fis.ua.pt; Mendes, N.F.C. [Physics Dept., University of Coimbra, 3004-516 Coimbra (Portugal); Santos, J.M.F. dos [Physics Dept., University of Coimbra, 3004-516 Coimbra (Portugal); Mir, J.A. [CCLRC Rutherford Appleton Laboratory, Chilton, Didcot, Oxon OX11 0QX (United Kingdom)

    2007-04-01

    The first implementation of a position sensitive readout for a Micro Hole and Strip Plate (MHSP) is described and tested. The readout consists on a resistive layer crossing the anodes and connected to a preamplifier on each side. By weighing the charge pulses on both preamplifiers it is possible to determine the interaction point. A 100-200 {omega} resistance layer between consecutive strips was found to be the best compromise between position linearity and energy resolution. Preliminary results using 22.1 keV X-rays present a good linearity between the measured and the actual position with a mean deviation of about 0.15 mm and a position resolution of 1.6 mm full-width at half-maximum (FWHM), being limited by the analogue division electronic circuit. The performance of the MHSP position detector will be presented and discussed for 1D readout.

  16. Positioning performance of a maglev fine positioning system

    Energy Technology Data Exchange (ETDEWEB)

    Wronosky, J.B.; Smith, T.G.; Jordan, J.D.; Darnold, J.R.

    1996-12-01

    A wafer positioning system was recently developed by Sandia National Laboratories for an Extreme Ultraviolet Lithography (EUVL) research tool. The system, which utilizes a magnetically levitated fine stage to provide ultra-precise positioning in all six degrees of freedom, incorporates technological improvements resulting from four years of prototype development experience. System enhancements, implemented on a second generation design for an ARPA National Center for Advanced Information Component Manufacturing (NCAICM) project, introduced active structural control for the levitated structure of the system. Magnetic levitation (maglev) is emerging as an important technology for wafer positioning systems in advanced lithography applications. The advantages of maglev stem from the absence of physical contact. The resulting lack of friction enables accurate, fast positioning. Maglev systems are mechanically simple, accomplishing full six degree-of-freedom suspension and control with a minimum of moving parts. Power-efficient designs, which reduce the possibility of thermal distortion of the platen, are achievable. Manufacturing throughput will be improved in future systems with the addition of active structural control of the positioning stages. This paper describes the design, implementation, and functional capability of the maglev fine positioning system. Specifics regarding performance design goals and test results are presented.

  17. Positivity of the English Language

    Science.gov (United States)

    Kloumann, Isabel M.; Danforth, Christopher M.; Harris, Kameron Decker; Bliss, Catherine A.; Dodds, Peter Sheridan

    2012-01-01

    Over the last million years, human language has emerged and evolved as a fundamental instrument of social communication and semiotic representation. People use language in part to convey emotional information, leading to the central and contingent questions: (1) What is the emotional spectrum of natural language? and (2) Are natural languages neutrally, positively, or negatively biased? Here, we report that the human-perceived positivity of over 10,000 of the most frequently used English words exhibits a clear positive bias. More deeply, we characterize and quantify distributions of word positivity for four large and distinct corpora, demonstrating that their form is broadly invariant with respect to frequency of word use. PMID:22247779

  18. Electrostatic beam-position monitor

    CERN Multimedia

    CERN PhotoLab

    1969-01-01

    Electrostatic beam-position monitor installed in its final location (bake-out cover removed). The ISR will contain about 110 of these monitors. Their accuracy is better than 1 mm, their band width about 1 MHz.

  19. Diagnosing Dementia—Positive Signs

    Science.gov (United States)

    ... Navigation Bar Home Current Issue Past Issues Diagnosing Dementia—Positive Signs Past Issues / Fall 2007 Table of ... easy, affordable blood test that could accurately diagnose Alzheimer's disease (AD)—even before symptoms began to show? Researchers ...

  20. Radar Plan Position Indicator Scope

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Radar Plan Position Indicator Scope is the collection of weather radar imagery for the period prior to the beginning of the Next Generation Radar (NEXRAD) system...

  1. Positivity of the English language.

    Directory of Open Access Journals (Sweden)

    Isabel M Kloumann

    Full Text Available Over the last million years, human language has emerged and evolved as a fundamental instrument of social communication and semiotic representation. People use language in part to convey emotional information, leading to the central and contingent questions: (1 What is the emotional spectrum of natural language? and (2 Are natural languages neutrally, positively, or negatively biased? Here, we report that the human-perceived positivity of over 10,000 of the most frequently used English words exhibits a clear positive bias. More deeply, we characterize and quantify distributions of word positivity for four large and distinct corpora, demonstrating that their form is broadly invariant with respect to frequency of word use.

  2. Stanford Linear Collider magnet positioning

    International Nuclear Information System (INIS)

    Wand, B.T.

    1991-08-01

    For the installation of the Stanford Linear Collider (SLC) the positioning and alignment of the beam line components was performed in several individual steps. In the following the general procedures for each step are outlined. The calculation of ideal coordinates for the magnets in the entire SLC will be discussed in detail. Special emphasis was given to the mathematical algorithms and geometry used in the programs to calculate these ideal positions. 35 refs., 21 figs

  3. Beam position optimisation for IMRT

    International Nuclear Information System (INIS)

    Holloway, L.; Hoban, P.

    2001-01-01

    Full text: The introduction of IMRT has not generally resulted in the use of optimised beam positions because to find the global solution of the problem a time consuming stochastic optimisation method must be used. Although a deterministic method may not achieve the global minimum it should achieve a superior dose distribution compared to no optimisation. This study aimed to develop and test such a method. The beam optimisation method developed relies on an iterative process to achieve the desired number of beams from a large initial number of beams. The number of beams is reduced in a 'weeding-out' process based on the total fluence which each beam delivers. The process is gradual, with only three beams removed each time (following a small number of iterations), ensuring that the reduction in beams does not dramatically affect the fluence maps of those remaining. A comparison was made between the dose distributions achieved when the beams positions were optimised in this fashion and when the beams positions were evenly distributed. The method has been shown to work quite effectively and efficiently. The Figure shows a comparison in dose distribution with optimised and non optimised beam positions for 5 beams. It can be clearly seen that there is an improvement in the dose distribution delivered to the tumour and a reduction in the dose to the critical structure with beam position optimisation. A method for beam position optimisation for use in IMRT optimisations has been developed. This method although not necessarily achieving the global minimum in beam position still achieves quite a dramatic improvement compared with no beam position optimisation and is very efficiently achieved. Copyright (2001) Australasian College of Physical Scientists and Engineers in Medicine

  4. Health Physics Positions Data Base

    International Nuclear Information System (INIS)

    Kerr, G.D.; Borges, T.; Stafford, R.S.; Lu, P.Y.; Carter, D.

    1992-05-01

    The Health Physics Positions (HPPOS) Data Base of the Nuclear Regulatory Commission (NRC) is a collection of summaries of NRC staff positions on a wide range of topics in radiation protection (health physics). The bases for the data base are 247 original documents in the form of letters, memoranda, and excerpts from technical reports. The HPPOS Data Base was developed by the NRC Headquarters and Regional Offices to help ensure uniformity in inspections, enforcement, and licensing actions

  5. Induction position for spinal anaesthesia: Sitting versus lateral position

    International Nuclear Information System (INIS)

    Shahzad, K.; Afshan, G.

    2013-01-01

    Objective: To compare the effect of induction position on block characteristics (sensory and motor nerves) and haemodynamic stability in elderly patients with isobaric bupivacaine. Patient comfort was also looked at. Methods: The randomized single blinded study was conducted at the Aga Khan University Hospital, Karachi, from September 2007 to August 2008. A total of 70 patients aged >60 years of both genders were included. Spinal anaesthesia was performed either in sitting or lateral position according to random allocation. Assessments of sensory, motor block and heart rate, systolic and diastolic blood pressure were recorded for 20 minutes. SPSS 16 was used for statistical analysis. Results: There was no significant difference for haemodynamic variables heart rate, systolic and diastolic blood pressure. The onset of anaesthesia was faster in the sitting group (4.5 minutes vs 5.4 minutes). The motor block characteristics were similar in both the groups. The majority of patients who reported 'very comfortable' for induction position belonged to the lateral group. Conclusion: Both sitting and lateral positions have similar effects on sensory and motor blockade and haemodynamic stability. However, patients generally found lateral position very comfortable. (author)

  6. [Positioning diagnosis of benign positional paroxysmal vertigo by VNG].

    Science.gov (United States)

    Wang, Na; Chen, Taisheng; Lin, Peng; Song, Wei; Dong, Hong

    2009-07-01

    To analyze the value of positioning diagnosis of VNG (Videonystagmograph) in patients with benign paroxysmal positional vertigo (BPPV). One hundred and twenty-six patients with BPPV were enrolled in this retrospective study. Their positional nystagmus recorded by VNG in Dix-Hallpike and roll tests were analyzed to summarize the characteristics of nystagmus on nystagmography of various BPPV. Of 126 patients with BPPV diagnosed in our center, the posterior semicircular canals (PSC) were involved in 98 patients (77.8%), whereas the horizontal semicircular canal (HSC) and anterior semicircular canal (ASC) were involved in 17 (13.5%) and 5 (3.9%), respectively. Six patients (4.8%) confirmed combined-BPPV had HSC-BPPV and ipsilateral PSC-BPPV. Twenty-eight patients with PSC-BPPV had reversal phase on nystagmography. The nystagmus of patients with P/ASC-canalithiasis showed upward/downward on the vertical phase of nystagmography and orientated the opposite side on horizontal phase in the head hanging position, and the nystagmus reversed when returned to sit. Nystagmus on horizontal phase could be provoked when the head turned to both sides of the roll tests in patients with HSC-BPPV. If the nystagmus and the head-turning shared the same direction, then HSC-canalithiasis was confirmed, and the direction of the head-turning which provoked the stronger nystagmus indicates the lesion side. If the nystagmus and the head-turning had the opposite direction, then HSC-cupulolithiasis was confirmed, and the direction of the head-turning which provoked the weaker nystagmus indicates the lesion side. Positional nystagmus can be recorded objectively using VNG, According to which positioning the semicircular canal involved would be easier and more accurate. The recording conserved also could be helpful for clinical diagnosis and repositioning of BPPV.

  7. Position coincidence optical identifications using Texas interferometer radio positions

    International Nuclear Information System (INIS)

    Bozyan, E.P.

    1979-01-01

    1048 radio source positions measured with the Texas Interferometer were searched for optical identifications on glass copies of the Palomar Sky Survey E and O plates, resulting in 242 identifications and 806 blank fields. Finding charts are presented for 124 of the 125 new identifications not previously reported in the literature, and for 73 blank fields containing nearby optical objects which may be real identifications. This brings the cumulative number of Texas radio positions searched to 2015, producing 864 optical identifications and 1151 blank fields

  8. Serial position learning in honeybees.

    Directory of Open Access Journals (Sweden)

    Randolf Menzel

    Full Text Available Learning of stimulus sequences is considered as a characteristic feature of episodic memory since it contains not only a particular item but also the experience of preceding and following events. In sensorimotor tasks resembling navigational performance, the serial order of objects is intimately connected with spatial order. Mammals and birds develop episodic(-like memory in serial spatio-temporal tasks, and the honeybee learns spatio-temporal order when navigating between the nest and a food source. Here I examine the structure of the bees' memory for a combined spatio-temporal task. I ask whether discrimination and generalization are based solely on simple forms of stimulus-reward learning or whether they require sequential configurations. Animals were trained to fly either left or right in a continuous T-maze. The correct choice was signaled by the sequence of colors (blue, yellow at four positions in the access arm. If only one of the possible 4 signals is shown (either blue or yellow, the rank order of position salience is 1, 2 and 3 (numbered from T-junction. No learning is found if the signal appears at position 4. If two signals are shown, differences at positions 1 and 2 are learned best, those at position 3 at a low level, and those at position 4 not at all. If three or more signals are shown these results are corroborated. This salience rank order again appeared in transfer tests, but additional configural phenomena emerged. Most of the results can be explained with a simple model based on the assumption that the four positions are equipped with different salience scores and that these add up independently. However, deviations from the model are interpreted by assuming stimulus configuration of sequential patterns. It is concluded that, under the conditions chosen, bees rely most strongly on memories developed during simple forms of associative reward learning, but memories of configural serial patterns contribute, too.

  9. Head and neck position sense.

    Science.gov (United States)

    Armstrong, Bridget; McNair, Peter; Taylor, Denise

    2008-01-01

    Traumatic minor cervical strains are common place in high-impact sports (e.g. tackling) and premature degenerative changes have been documented in sports people exposed to recurrent impact trauma (e.g. scrummaging in rugby) or repetitive forces (e.g. Formula 1 racing drivers, jockeys). While proprioceptive exercises have been an integral part of rehabilitation of injuries in the lower limb, they have not featured as prominently in the treatment of cervical injuries. However, head and neck position sense (HNPS) testing and re-training may have relevance in the management of minor sports-related neck injuries, and play a role in reducing the incidence of ongoing pain and problems with function. For efficacious programmes to be developed and tested, fundamental principles associated with proprioception in the cervical spine should be considered. Hence, this article highlights the importance of anatomical structures in the cervical spine responsible for position sense, and how their interaction with the CNS affects our ability to plan and execute effective purposeful movements. This article includes a review of studies examining position sense in subjects with and without pathology and describes the effects of rehabilitation programmes that have sought to improve position sense. In respect to the receptors providing proprioceptive information for the CNS, the high densities and complex arrays of spindles found in cervical muscles suggest that these receptors play a key role. There is some evidence suggesting that ensemble encoding of discharge patterns from muscle spindles is relayed to the CNS and that a pattern recognition system is used to establish joint position and movement. Sensory information from neck proprioceptive receptors is processed in tandem with information from the vestibular system. There are extensive anatomical connections between neck proprioceptive inputs and vestibular inputs. If positional information from the vestibular system is inaccurate or

  10. Relativistic positioning systems: Numerical simulations

    Science.gov (United States)

    Puchades Colmenero, Neus

    The position of users located on the Earth's surface or near it may be found with the classic positioning systems (CPS). Certain information broadcast by satellites of global navigation systems, as GPS and GALILEO, may be used for positioning. The CPS are based on the Newtonian formalism, although relativistic post-Newtonian corrections are done when they are necessary. This thesis contributes to the development of a different positioning approach, which is fully relativistic from the beginning. In the relativistic positioning systems (RPS), the space-time position of any user (ship, spacecraft, and so on) can be calculated with the help of four satellites, which broadcast their proper times by means of codified electromagnetic signals. In this thesis, we have simulated satellite 4-tuples of the GPS and GALILEO constellations. If a user receives the signals from four satellites simultaneously, the emission proper times read -after decoding- are the user "emission coordinates". In order to find the user "positioning coordinates", in an appropriate almost inertial reference system, there are two possibilities: (a) the explicit relation between positioning and emission coordinates (broadcast by the satellites) is analytically found or (b) numerical codes are designed to calculate the positioning coordinates from the emission ones. Method (a) is only viable in simple ideal cases, whereas (b) allows us to consider realistic situations. In this thesis, we have designed numerical codes with the essential aim of studying two appropriate RPS, which may be generalized. Sometimes, there are two real users placed in different positions, which receive the same proper times from the same satellites; then, we say that there is bifurcation, and additional data are needed to choose the real user position. In this thesis, bifurcation is studied in detail. We have analyzed in depth two RPS models; in both, it is considered that the satellites move in the Schwarzschild's space

  11. Cadastral Database Positional Accuracy Improvement

    Science.gov (United States)

    Hashim, N. M.; Omar, A. H.; Ramli, S. N. M.; Omar, K. M.; Din, N.

    2017-10-01

    Positional Accuracy Improvement (PAI) is the refining process of the geometry feature in a geospatial dataset to improve its actual position. This actual position relates to the absolute position in specific coordinate system and the relation to the neighborhood features. With the growth of spatial based technology especially Geographical Information System (GIS) and Global Navigation Satellite System (GNSS), the PAI campaign is inevitable especially to the legacy cadastral database. Integration of legacy dataset and higher accuracy dataset like GNSS observation is a potential solution for improving the legacy dataset. However, by merely integrating both datasets will lead to a distortion of the relative geometry. The improved dataset should be further treated to minimize inherent errors and fitting to the new accurate dataset. The main focus of this study is to describe a method of angular based Least Square Adjustment (LSA) for PAI process of legacy dataset. The existing high accuracy dataset known as National Digital Cadastral Database (NDCDB) is then used as bench mark to validate the results. It was found that the propose technique is highly possible for positional accuracy improvement of legacy spatial datasets.

  12. Positive Youth Psychology: Lessons from Positive Peer Culture

    Science.gov (United States)

    Steinebach, Christoph; Steinebach, Ursula; Brendtro, Larry K.

    2013-01-01

    Positive Peer Culture (PPC) is a strength-oriented approach developed by Vorrath and Brendtro (1985) to prevent or reverse negative peer influence by building a climate of peer concern and respect. PPC operates in a range of settings including residential treatment, alternative schools, juvenile justice, and youth leadership groups. It is an…

  13. CONTEMPLATIVE POSITIVE PSYCHOLOGY: INTRODUCING MINDFULNESS INTO POSITIVE PSYCHOLOGY

    Directory of Open Access Journals (Sweden)

    Ausiàs Cebolla

    2017-01-01

    Full Text Available Although mindfulness is included in many positive psychology manuals as a “positive” technique, the implications of its use have scarcely been developed and the relationship between mindfulness and human well-being has barely been researched. Analyzing the main strengths of the two fields, the possibilities for their integration and the potential contradictions between their messages is essential in order to establish connections. Mindfulness is more than a meditation technique. It has implicit within it a set of values and ethical conditions that coincide to a great extent with the proposed assumptions from positive psychology, such as the development of kindness, compassion, and positive emotions. The aim of this paper is to present, on the one hand, the commonalities and similarities, and on the other, the differences between mindfulness and positive psychology. We also present the main studies that have investigated the role of mindfulness and contemplative practices on human well-being. Finally future research will be discussed and intervention suggested in order to bring the two proposals together.

  14. Antiproton source beam position system

    International Nuclear Information System (INIS)

    Bagwell, T.; Holmes, S.; McCarthy, J.; Webber, R.

    1984-05-01

    The TeV I Beam Position Monitor (BPM) system is designed to provide a useful diagnostic tool during the commissioning and operational phases of the antiproton source. Simply stated the design goal is to provide single turn position information for intensities of > 1x10 9 particles, and multi-turn (clocked orbit) information for beam intensities of > 1x10 7 particles, both with sub-millimeter resolution. It is anticipated that the system will be used during commissioning for establishing the first turn through the Debuncher and Accumulator, for aligning injection orbits, for providing information necessary to correct closed orbits, and for measuring various machine parameters (e.g. tunes, dispersion, aperture, chromaticity). During normal antiproton operation the system will be used to monitor the beam position throughout the accumulation process

  15. The Promise of Positive Psychology

    Directory of Open Access Journals (Sweden)

    Mihaly Csikszentmihalyi

    2009-12-01

    Full Text Available Positive Psychology has demonstrated its usefulness in studying and contributing to individual well being. The next big challenge for this new field is to help improving the social and cultural conditions in which people live. Three specific goals are discussed: A more complete understanding of human nature; forging a more sustainable and more fair social contract; and a rediscovery of the joys of existence. If Positive Psychology will be able to support these goals, it will become an important contributor to the evolution of human consciousness and the evolution of culture.

  16. Different positions of uncertain lives

    DEFF Research Database (Denmark)

    Stenum, Helle

    On the basis of my ethnographic research in Denmark and Spain, I will investigate and compare four different positions of illegality in two different national contexts. Legal and institutional practices on the one hand produce the conditions for migrant illegality as such, but are also decisive...... for both the lived experience as irregular migrant and the opportunities for agency and strategizing among migrants....

  17. Positive Psychology: Transforming Young Lives

    Science.gov (United States)

    Brendtro, Larry K.; Mitchell, Martin L.

    2011-01-01

    To reach responsible independence, young people must become invested in setting their life course. A rich history of research and practice shows that democratic group climates foster autonomy and prosocial behavior. This article explores principles and practices for creating positive peer cultures to develop strengths and help youth meet their…

  18. Positivity bounds for Sivers functions

    International Nuclear Information System (INIS)

    Kang Zhongbo; Soffer, Jacques

    2011-01-01

    We generalize a positivity constraint derived initially for parity-conserving processes to the parity-violating ones, and use it to derive non-trivial bounds on several Sivers functions, entering in the theoretical description of single spin asymmetry for various processes.

  19. Collective irrationality and positive feedback.

    Science.gov (United States)

    Nicolis, Stamatios C; Zabzina, Natalia; Latty, Tanya; Sumpter, David J T

    2011-04-26

    Recent experiments on ants and slime moulds have assessed the degree to which they make rational decisions when presented with a number of alternative food sources or shelter. Ants and slime moulds are just two examples of a wide range of species and biological processes that use positive feedback mechanisms to reach decisions. Here we use a generic, experimentally validated model of positive feedback between group members to show that the probability of taking the best of options depends crucially on the strength of feedback. We show how the probability of choosing the best option can be maximized by applying an optimal feedback strength. Importantly, this optimal value depends on the number of options, so that when we change the number of options the preference of the group changes, producing apparent "irrationalities". We thus reinterpret the idea that collectives show "rational" or "irrational" preferences as being a necessary consequence of the use of positive feedback. We argue that positive feedback is a heuristic which often produces fast and accurate group decision-making, but is always susceptible to apparent irrationality when studied under particular experimental conditions.

  20. Collective irrationality and positive feedback.

    Directory of Open Access Journals (Sweden)

    Stamatios C Nicolis

    Full Text Available Recent experiments on ants and slime moulds have assessed the degree to which they make rational decisions when presented with a number of alternative food sources or shelter. Ants and slime moulds are just two examples of a wide range of species and biological processes that use positive feedback mechanisms to reach decisions. Here we use a generic, experimentally validated model of positive feedback between group members to show that the probability of taking the best of options depends crucially on the strength of feedback. We show how the probability of choosing the best option can be maximized by applying an optimal feedback strength. Importantly, this optimal value depends on the number of options, so that when we change the number of options the preference of the group changes, producing apparent "irrationalities". We thus reinterpret the idea that collectives show "rational" or "irrational" preferences as being a necessary consequence of the use of positive feedback. We argue that positive feedback is a heuristic which often produces fast and accurate group decision-making, but is always susceptible to apparent irrationality when studied under particular experimental conditions.

  1. Benign paroxysmal positional vertigo treatment

    DEFF Research Database (Denmark)

    West, Niels; Hansen, Søren; Bloch, Sune Land

    2017-01-01

    Benign paroxysmal positional vertigo (BPPV) remains the most frequent cause of vertigo. The TRV chair is a mechanical device suited for optimization of managing complex cases of BPPV. Although the use of repositioning devices in the management of BPPV is increasing, no applicable guide for the TRV...

  2. Positive Pedagogy for Sport Coaching

    Science.gov (United States)

    Light, Richard L.; Harvey, Stephen

    2017-01-01

    The literature suggests that, despite some challenges in their implementation, player/athlete-centred, inquiry-based approaches to teaching games and coaching team sport can improve game playing ability, increase player/athlete motivation and provide positive affective experiences of learning. A range of these approaches, including Teaching Games…

  3. Efficient GPS Position Determination Algorithms

    National Research Council Canada - National Science Library

    Nguyen, Thao Q

    2007-01-01

    ... differential GPS algorithm for a network of users. The stand-alone user GPS algorithm is a direct, closed-form, and efficient new position determination algorithm that exploits the closed-form solution of the GPS trilateration equations and works...

  4. Continuous Positive Airway Pressure (CPAP)

    Science.gov (United States)

    ... Sleep Apnea? Lifestyle change including weight loss and exercise can help to improve sleep apnea and its related health problems. Sleep positioning and oral appliances have also been found to be effective. In cases when non-invasive treatments fail, a ...

  5. False Positives in Exoplanet Detection

    Science.gov (United States)

    Leuquire, Jacob; Kasper, David; Jang-Condell, Hannah; Kar, Aman; Sorber, Rebecca; Suhaimi, Afiq; KELT (Kilodegree Extremely Little Telescope)

    2018-06-01

    Our team at the University of Wyoming uses a 0.6 m telescope at RBO (Red Buttes Observatory) to help confirm results on potential exoplanet candidates from low resolution, wide field surveys shared by the KELT (Kilodegree Extremely Little Telescope) team. False positives are common in this work. We carry out transit photometry, and this method comes with special types of false positives. The most common false positive seen at the confirmation level is an EB (eclipsing binary). Low resolution images are great in detecting multiple sources for photometric dips in light curves, but they lack the precision to decipher single targets at an accurate level. For example, target star KC18C030621 needed RBO’s photometric precision to determine there was a nearby EB causing exoplanet type light curves. Identifying false positives with our telescope is important work because it helps eliminate the waste of time taken by more expensive telescopes trying to rule out negative candidate stars. It also furthers the identification of other types of photometric events, like eclipsing binaries, so they can be studied on their own.

  6. On persistently positively expansive maps

    Directory of Open Access Journals (Sweden)

    Alexander Arbieto

    2010-06-01

    Full Text Available In this paper, we prove that any C¹-persistently positively expansive map is expanding. This improves a result due to Sakai (Sakai 2004.Neste artigo, mostramos que todo mapa C¹-persistentemente positivamente expansivo e expansor. Isto melhora um resultado devido a Sakai (Sakai 2004.

  7. Mallinckrodt's position on SLR production

    International Nuclear Information System (INIS)

    Lee, T.L.

    1985-01-01

    The potential of the short-lived radionuclides used in nuclear medicine applications and Mallinckrodt's position are discussed. An update of Mallinckrodt's activities and future plans are also given. The keen interest of Mallinckrodt, Inc., in the application and development of short-lived radionuclides for medical use is stressed, as well as envisioned innovations

  8. Marijuana and Children. Position Statement

    Science.gov (United States)

    Endsley, Patricia; Embrey, Mary Louise

    2014-01-01

    Registered professional school nurses (hereinafter referred to as school nurses) promote wellness and disease prevention to improve health outcomes for our nation's children. It is the position of the National Association of School Nurses (NASN) that the marijuana plant remain under the United States Drug Enforcement Agency's (DEA) Schedule I…

  9. Water level sensor and temperature profile detector

    International Nuclear Information System (INIS)

    Tokarz, R.D.

    1983-01-01

    A temperature profile detector comprising a surrounding length of metal tubing and an interior electrical conductor both constructed of high temperature high electrical resistance materials. A plurality of gas-filled expandable bellows made of electrically conductive material is electrically connected to the interior electrical conductor and positioned within the length of metal tubing. The bellows are sealed and contain a predetermined volume of a gas designed to effect movement of the bellows from an open circuit condition to a closed circuit condition in response to monitored temperature changes sensed by each bellows

  10. Water level sensor and temperature profile detector

    Science.gov (United States)

    Tokarz, Richard D.

    1983-01-01

    A temperature profile detector comprising a surrounding length of metal tubing and an interior electrical conductor both constructed of high temperature high electrical resistance materials. A plurality of gas-filled expandable bellows made of electrically conductive material is electrically connected to the interior electrical conductor and positioned within the length of metal tubing. The bellows are sealed and contain a predetermined volume of a gas designed to effect movement of the bellows from an open circuit condition to a closed circuit condition in response to monitored temperature changes sensed by each bellows.

  11. Water-level sensor and temperature-profile detector

    Science.gov (United States)

    Not Available

    1981-01-29

    A temperature profile detector is described which comprises a surrounding length of metal tubing and an interior electrical conductor both constructed of high temperature high electrical resistance materials. A plurality of gas-filled expandable bellows made of electrically conductive material are positioned at spaced locations along a length of the conductors. The bellows are sealed and contain a predetermined volume of a gas designed to effect movement of the bellows from an open circuit condition to a closed circuit condition in response to monitored temperature changes sensed by each bellows.

  12. 3 Ways to Increase Positive Emotions

    Science.gov (United States)

    ... Search English Español 3 Ways to Increase Positive Emotions KidsHealth / For Teens / 3 Ways to Increase Positive ... to give yourself a boost. Track Your Positive Emotions Name the positive emotions you're already familiar ...

  13. Entropy inequalities from reflection positivity

    International Nuclear Information System (INIS)

    Casini, H

    2010-01-01

    We investigate the question of whether the entropy and the Renyi entropies of the vacuum state reduced to a region of space can be represented in terms of correlators in quantum field theory. In this case, the positivity relations for the correlators are mapped into inequalities for the entropies. We write them using a real-time version of reflection positivity, which can be generalized to general quantum systems. Using this generalization we can prove an infinite sequence of inequalities which are obeyed by the Renyi entropies of integer index. There is one independent inequality involving any number of different subsystems. In quantum field theory the inequalities acquire a simple geometrical form and are consistent with the integer index Renyi entropies being given by vacuum expectation values of twisting operators in the Euclidean formulation. Several possible generalizations and specific examples are analyzed

  14. Position-sensitive radiation detector

    International Nuclear Information System (INIS)

    Mathieson, E.; Smith, G.C.; Gilvin, P.J.

    1981-01-01

    Apparatus for sensing the position of radiation received has a plurality of receptors spaced in at least one line on which the position is to be determined, their outputs being associated to form at least two groups, the density of the receptors in each group varying along the line. The receptors may comprise cathode arrays of a multiwire proportional counter, with an anode array between, measuring along lines in directions x and y respectively. The density of the wires in the two groups, decreases in opposite directions. A circuit determines the ratio of the output of one group to the sum of the group outputs. In another embodiment a scintillator is viewed by a plurality of light guides, the ends of which adjacent to the scintillator form the receptors, the four groups of which each terminate on a photomultiplier. (author)

  15. Position and orientation tracking system

    International Nuclear Information System (INIS)

    Burks, B.L.; DePiero, F.W.; Armstrong, G.A.; Jansen, J.F.; Muller, R.C.; Gee, T.F.

    1998-01-01

    A position and orientation tracking system presents a laser scanning apparatus having two measurement pods, a control station, and a detector array. The measurement pods can be mounted in the dome of a radioactive waste storage silo. Each measurement pod includes dual orthogonal laser scanner subsystems. The first laser scanner subsystem is oriented to emit a first line laser in the pan direction. The second laser scanner is oriented to emit a second line laser in the tilt direction. Both emitted line lasers scan planes across the radioactive waste surface to encounter the detector array mounted on a target robotic vehicle. The angles of incidence of the planes with the detector array are recorded by the control station. Combining measurements describing each of the four planes provides data for a closed form solution of the algebraic transform describing the position and orientation of the target robotic vehicle. 14 figs

  16. Identification of Dynamically Positioned Ships

    Directory of Open Access Journals (Sweden)

    Thor I. Fossen

    1996-04-01

    Full Text Available Todays model-based dynamic positioning (DP systems require that the ship and thruster dynamics are known with some accuracy in order to use linear quadratic optical control theory. However, it is difficult to identify the mathematical model of a dynamically posititmed (DP ship since the ship is not persistently excited under DP. In addition the ship parameter estimation problem is nonlinear and multivariable with only position and thruster state measurements available for parameter estimation. The process and measurement noise must also be modeled in order to avoid parameter drift due to environmental disturbances and sensor failure. This article discusses an off-line parallel extended Kalman filter (EKF algorithm utilizing two measurement series in parallel to estimate the parameters in the DP ship model. Full-scale experiments with a supply vessel are used to demonstrate the convergence and robustness of the proposed parameter estimator.

  17. Classification of positive blood cultures

    DEFF Research Database (Denmark)

    Gradel, Kim Oren; Knudsen, Jenny Dahl; Arpi, Magnus

    2012-01-01

    . For each classification, we tabulated episodes derived by the physicians assessment and the computer algorithm and compared 30-day mortality between concordant and discrepant groups with adjustment for age, gender, and comorbidity. RESULTS: Physicians derived 9,482 reference episodes from 21,705 positive......- vs. hospitalonset, whereas there were no material differences within the other comparison groups. CONCLUSIONS: Using data from health administrative registries, we found high agreement between the computer algorithms and the physicians assessments as regards contamination vs. bloodstream infection......ABSTRACT: BACKGROUND: Information from blood cultures is utilized for infection control, public health surveillance, and clinical outcome research. This information can be enriched by physicians assessments of positive blood cultures, which are, however, often available from selected patient groups...

  18. The STAR Vertex Position Detector

    Energy Technology Data Exchange (ETDEWEB)

    Llope, W.J., E-mail: llope@rice.edu [Rice University, Houston, TX 77005 (United States); Zhou, J.; Nussbaum, T. [Rice University, Houston, TX 77005 (United States); Hoffmann, G.W. [University of Texas, Austin, TX 78712 (United States); Asselta, K. [Brookhaven National Laboratory, Upton, NY 11973 (United States); Brandenburg, J.D.; Butterworth, J. [Rice University, Houston, TX 77005 (United States); Camarda, T.; Christie, W. [Brookhaven National Laboratory, Upton, NY 11973 (United States); Crawford, H.J. [University of California, Berkeley, CA 94720 (United States); Dong, X. [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Engelage, J. [University of California, Berkeley, CA 94720 (United States); Eppley, G.; Geurts, F. [Rice University, Houston, TX 77005 (United States); Hammond, J. [Brookhaven National Laboratory, Upton, NY 11973 (United States); Judd, E. [University of California, Berkeley, CA 94720 (United States); McDonald, D.L. [Rice University, Houston, TX 77005 (United States); Perkins, C. [University of California, Berkeley, CA 94720 (United States); Ruan, L.; Scheblein, J. [Brookhaven National Laboratory, Upton, NY 11973 (United States); and others

    2014-09-21

    The 2×3 channel pseudo Vertex Position Detector (pVPD) in the STAR experiment at RHIC has been upgraded to a 2×19 channel detector in the same acceptance, called the Vertex Position Detector (VPD). This detector is fully integrated into the STAR trigger system and provides the primary input to the minimum-bias trigger in Au+Au collisions. The information from the detector is used both in the STAR Level-0 trigger and offline to measure the location of the primary collision vertex along the beam pipe and the event “start time” needed by other fast-timing detectors in STAR. The offline timing resolution of single detector channels in full-energy Au+Au collisions is ∼100 ps, resulting in a start time resolution of a few tens of picoseconds and a resolution on the primary vertex location of ∼1 cm.

  19. Submicron position-sensitive detector

    Energy Technology Data Exchange (ETDEWEB)

    Pugatch, V M; Rosenfeld, A B; Litovchenko, P G; Barabash, L I; Nemets, O F; Pavlenko, Yu N; Vasiliev, Yu O [Ukrainian Academy of Sciences, Kiev (Ukraine). Inst. for Nuclear Research

    1992-08-01

    A method has been developed to measure precisely the coordinates of charged particles incident between adjacent strips of a strip detector. The position sensitivity of an inter-strip gap has been studied by means of a pulsed laser beam and irradiation by [alpha]-particles of a [sup 226]Ra-source. The capacitive division of charge generated by the incident particle depends on the position of its track. Its coordinates were determined by two-dimensional amplitude analysis of the charges collected by neighbouring strips. This method of coordinate determination applied to studies of spatial and energy distributions of electromagnetic as well as charged particle beams (including radioactive ion beams) of low intensity could provide the highest level of the precision limited by the track dimensions of charged particles, i.e. percents of a micrometer. (orig.).

  20. Doripenem: position in clinical practice.

    Science.gov (United States)

    Dedhia, Harakh V; McKnight, Richard

    2009-06-01

    Doripenem is a novel carbapenem with a broad spectrum of activity against Gram-positive pathogens, anerobes and Gram-negative bacteria, including Pseudomonas aeruginosa. Doripenem exhibits rapid bactericidal activity with two- to fourfold lower MIC values for Gram-negative bacteria, compared with other carbapenems such as imipenem. Doripenem is approved for the treatment of complicated intra-abdominal infection and urinary tract infections. It has been successfully used in the treatment of nosocomial and ventilator-associated pneumonia. It has a potential to be the drug of choice for these conditions. This evaluation focuses on the general review of the drug, including mechanisms of resistance, clinical efficacy and the position of doripenem in clinical practice. Stability against numerous beta-lactamases, low adverse-event potential and more potent in vitro and possibly in vivo activity against P. aeruginosa and Acinetobacter baumanni compared with existing carbapenems are attractive features.

  1. DIAGNOSIS OF FINANCIAL POSITION STRUCTURE

    Directory of Open Access Journals (Sweden)

    CĂRUNTU GENU ALEXANDRU

    2017-02-01

    Full Text Available The analysis of financial position structure aimed at issues that highlight on the one hand the economic relations between asset side and liability side and on the other hand the changes that are achieved as a result of internal and external factors. In order to establish the causes that led over time to changing the structure of financial position we analyze the structure of assets, liabilities and equity. The balance sheet is a summary representing only a snapshot at a certain time that changes continuously and through which are presented economic goods, rights and obligations of the company at year-end. The balance sheet is the universal working tool that contains information on the company's heritage and performance. To achieve its purpose, namely to generate profit in conditions of intense competition the firm constitutes a heritage structure, an economic fixed and circulating capital appropriate to future needs.

  2. The evolutionary position of nematodes

    Directory of Open Access Journals (Sweden)

    Gojobori Takashi

    2002-04-01

    Full Text Available Abstract Background The complete genomes of three animals have been sequenced by global research efforts: a nematode worm (Caenorhabditis elegans, an insect (Drosophila melanogaster, and a vertebrate (Homo sapiens. Remarkably, their relationships have yet to be clarified. The confusion concerns the enigmatic position of nematodes. Traditionally, nematodes have occupied a basal position, in part because they lack a true body cavity. However, the leading hypothesis now joins nematodes with arthropods in a molting clade, Ecdysozoa, based on data from several genes. Results We tested the Ecdysozoa hypothesis with analyses of more than 100 nuclear protein alignments, under conditions that would expose biases, and found that it was not supported. Instead, we found significant support for the traditional hypothesis, Coelomata. Our result is robust to different rates of sequence change among genes and lineages, different numbers of taxa, and different species of nematodes. Conclusion We conclude that insects (arthropods are genetically and evolutionarily closer to humans than to nematode worms.

  3. Strategic marketing positioning of Ohrid

    Directory of Open Access Journals (Sweden)

    Nikola Cuculeski

    2016-06-01

    Full Text Available Having in mind the fact that tourism is an industry that involves the work of lots of providers, it is of great importance to especially analyse the strategic marketing approach of a destination. That should be done in order to improve the image and the position in the mind of the consumer. This paper has the aim to show an overview of the strategy in marketing overall, as well as the image that Ohrid has as a destination in terms of tourism. The SWOT analysis provides efforts in order to improve the image and to help in the strategy creation and positioning in terms of tourism. The paper is ought to be part of a bigger research project in this regard, a research project that should help Ohrid in the pursue of gaining a distinctive image and proper marketing strategy.

  4. CLIC Drive Beam Position Monitor

    CERN Document Server

    Smith, S; Gudkov, D; Soby, L; Syratchev, I

    2011-01-01

    CLIC, an electron-positron linear collider proposed to probe the TeV energy scale, is based on a two-beam scheme where RF power to accelerate a high energy luminosity beam is extracted from a high current drive beam. The drive beam is efficiently generated in a long train at modest frequency and current then compressed in length and multiplied in frequency via bunch interleaving. The drive beam decelerator requires >40000 quadrupoles, each holding a beam position monitor (BPM). Though resolution requirements are modest (2 microns) these BPMs face several challenges. They must be compact and inexpensive. They must operate below waveguide cutoff to insure locality of position signals, ruling out processing at the natural 12 GHz bunch spacing frequency. Wakefields must be kept low. We find compact conventional stripline BPM with signals processed below 40 MHz can meet requirements. Choices of mechanical design, operating frequency, bandwidth, calibration and processing algorithm are presented. Calculations of wa...

  5. Linear positivity and virtual probability

    International Nuclear Information System (INIS)

    Hartle, James B.

    2004-01-01

    We investigate the quantum theory of closed systems based on the linear positivity decoherence condition of Goldstein and Page. The objective of any quantum theory of a closed system, most generally the universe, is the prediction of probabilities for the individual members of sets of alternative coarse-grained histories of the system. Quantum interference between members of a set of alternative histories is an obstacle to assigning probabilities that are consistent with the rules of probability theory. A quantum theory of closed systems therefore requires two elements: (1) a condition specifying which sets of histories may be assigned probabilities and (2) a rule for those probabilities. The linear positivity condition of Goldstein and Page is the weakest of the general conditions proposed so far. Its general properties relating to exact probability sum rules, time neutrality, and conservation laws are explored. Its inconsistency with the usual notion of independent subsystems in quantum mechanics is reviewed. Its relation to the stronger condition of medium decoherence necessary for classicality is discussed. The linear positivity of histories in a number of simple model systems is investigated with the aim of exhibiting linearly positive sets of histories that are not decoherent. The utility of extending the notion of probability to include values outside the range of 0-1 is described. Alternatives with such virtual probabilities cannot be measured or recorded, but can be used in the intermediate steps of calculations of real probabilities. Extended probabilities give a simple and general way of formulating quantum theory. The various decoherence conditions are compared in terms of their utility for characterizing classicality and the role they might play in further generalizations of quantum mechanics

  6. Market segmentation, targeting and positioning

    OpenAIRE

    Camilleri, Mark Anthony

    2017-01-01

    Businesses may not be in a position to satisfy all of their customers, every time. It may prove difficult to meet the exact requirements of each individual customer. People do not have identical preferences, so rarely does one product completely satisfy everyone. Many companies may usually adopt a strategy that is known as target marketing. This strategy involves dividing the market into segments and developing products or services to these segments. A target marketing strategy is focused on ...

  7. Control rod position detection device

    International Nuclear Information System (INIS)

    Akita, Haruo; Ogiwara, Sakae.

    1996-01-01

    The device of the present invention is used in a back-up shut down system of an LMFBR type reactor which is easy for maintenance, has high reliability and can recognize the position of control rods accurately. Namely, a permanent magnet is disposed to a control rod extension tube connected to the lower portion of the control rod. The detector guide tube is disposed in the vicinity of the control rod extension tube. A detector having a detection coil is inserted into a detector tube. With such constitution, the control rod can be detected at one position using the following method. (1) the movement of the magnetic field of the permanent magnet is detected by the detection coil. (2) a plurality of grooves are formed on the control rod extension tube, and the movement of the grooves is detected. In addition, the detection coil is inserted into the detector guide tube, and the signals from the detection coil are inputted to a signal processing circuit disposed at the outside of the reactor vessel using an MI cable to enable the maintenance of the detector. Further, if the detector comprises a detection coil and an excitation coil, the position of a dropped control rod can be recognized at a plurality of points. (I.S.)

  8. The dilemmas of victim positioning

    Directory of Open Access Journals (Sweden)

    Dorte Marie Søndergaard

    2015-08-01

    Full Text Available This article centres on some of the dilemmas contained within victim positioning. Such dilemmas are often overlooked by the authorities involved with people subjected to relational aggression. 2 For example, when teachers rule out cases of bullying because the victim has 'participated in' or 'laughed at' some of the bullies' initiatives, or when a rape victim's status as a victim is questioned because, in the lead up to the assault, she was supposedly friendly to the rapist. In these cases, it could be useful to explore the reason for the bullying victim's apparent collusion or to better understand the premises for the rape victim's positioning options in relation to the perpetrator. In other words, it could be fruitful to explore the dynamics and dilemmas of the victim position. In this article, I aim to reflect on the motivational conditions of the victim phenomenon. These reflections are based on an analysis of qualitative data produced through interviews with school children as well as on relevant secondary literature.

  9. USI A-43 resolution positions

    International Nuclear Information System (INIS)

    1983-04-01

    NUREG-0869 is comprised of the following documents: Proposed Regulatory Guide 1.82, Revision 1, Sump for Emergency Core Cooling and Containment Spray Systems; The Value-Impact Statement for USI A-43, Containment Emergency Sump Performance; and Background and Summary of Minutes of Meetings of the Committee to Review Generic Requirements Regarding Unresolved Safety Issue A-43 Resolution. The report has been assembled to facilitate obtaining for comment feedback on the position developed for resolution of USI A-43. There are no licensing requirements contained in NUREG-0869, and it should be clearly noted that this for comment report will not be used as interim requirements

  10. Patient positioning and supporting arrangement

    International Nuclear Information System (INIS)

    Heavens, M.; James, R.C.; Slinn, D.S.

    1980-01-01

    This patent specification describes an E.M.I. claim relating to a patient positioning and support arrangement for a computerised axial tomography system, the arrangement comprising a curved platter upon which the patient can be disposed, a table having a curved groove to accommodate the platter, and means for driving the platter slidably along the groove; the platter being formed of a substantially rigid platform shaped to conform to the groove, and a shroud, secured to the platter and disposed between the platter and the surface of the groove, so as to permit the platter to slide smoothly. (U.K.)

  11. Crystal physics with positive pions

    International Nuclear Information System (INIS)

    Flik, G.

    1983-01-01

    The π + /μ + lattice channeling is a new method of investigation in solid state physics. In the present thesis axial and planar channeling effects could be observed for the first time in monocrystalline Tantalum for 4, 12 MeV Muons generated by the decay of implanted positive pions. It is found that pions for T + /μ + channeling is investigated in Germanium for low temperatures. For T > 80 K tetrahedral sites are found, but for T < 80 K hexaedral sites or sites in the middle of the Ge-Ge bond are preferred. (BHO)

  12. Indoor Positioning Using GPS Revisited

    DEFF Research Database (Denmark)

    Kjærgaard, Mikkel Baun; Blunck, Henrik; Godsk, Torben

    2010-01-01

    It has been considered a fact that GPS performs too poorly inside buildings to provide usable indoor positioning. We analyze results of a measurement campaign to improve on the understanding of indoor GPS reception characteristics. The results show that using state-of-the-art receivers GPS...... low signal-to-noise ratios, multipath phenomena or bad satellite constellation geometry. We have also measured the indoor performance of embedded GPS receivers in mobile phones which provided lower availability and accuracy than state-of-the-art ones. Finally, we consider how the GPS performance...

  13. Positive Quasi Linear Operator Formulation

    International Nuclear Information System (INIS)

    Berry, L.A.; Jaeger, E.F.

    2005-01-01

    Expressions for the RF quasi-linear operator are biquadratic sums over the Fourier modes (or FLR equivalent) that describe the RF electric field with a kernel that is a function of the two wave vectors, k-vector L and k-vector R , in the sum. As a result of either an implicit or explicit average over field lines or flux surfaces, this kernel only depends on one parallel wave vector, conventionally k R -vector. When k-vector is an independent component of the representation for E, the sums are demonstrably positive. However, except for closed field line systems, k-vector is dependent on the local direction of the equilibrium magnetic field, and, empirically, the absorbed energy and quasi-linear diffusion coefficients are observed to have negative features. We have formally introduced an independent k-vector sum by Fourier transforming the RF electric field (assuming straight field lines) using a field-line-length coordinate. The resulting expression is positive. We have modeled this approach by calculating the quasi linear operator for 'modes' with fixed k-vector. We form these modes by discretizing k-vector and then assigning all of the Fourier components with k-vectorthat fall within a given k-vector bin to that k-vector mode. Results will be shown as a function of the number of bins. Future work will involve implementing the expressions derived from the Fourier transform and evaluating the dependence on field line length

  14. Global positioning site environment evaluator

    International Nuclear Information System (INIS)

    Leffler, S.; Reeser, H.G.; Zaker, E.; Hansen, W.; Sikorski, R.W.

    1990-01-01

    Development of an innovative, integrated, automated system (Global Positioning Site Environment Evaluator - GPSEETM) for surveying contaminated waste sites is described. This system makes novel use of the Global Positioning System (GPS) satellite constellation for establishing specific locations and current times for surveying radioactive, hazardous, or mixed-waste sites. GPSEE may also be used for waste site contamination surveys after remediation activities to ensure environmental remediation is complete. A base station is established for collecting and recording data and directing field operations for field stations which may be located many miles from the base station. The field operators collect site surveying and contamination data utilizing a variety of chemical and radiological sensors. A major goal for the data collection process is to collect all data utilizing in situ sensors, thereby minimizing the need for collecting soil and water samples. Site contamination data is transmitted electronically to the base station for recording and processing. The GPSEE system is being developed for use at DOE/DOD and a variety of industrial facilities. 3 figs

  15. 7 positions in 2 hours

    Directory of Open Access Journals (Sweden)

    Jessica Ackerman

    2013-07-01

    Full Text Available 7 positions in 2 hours (2013 is a drawing that documents the process of making the short film Role Reversal Rehearsal. It became quickly apparent that the process of making the work was more dynamic and interesting than the finished piece itself. Relationships between the childcare arrangements of the participants and the collective working process brought about the necessity of collaboration for parent artists. Each participant gave their time, energy and creative insight towards filming a series of birthing positions with roles reversed. The male performer became the central figure in an attempt to prompt empathy, humour, and to embody the importance of the male role in childbirth. There were two hours to choreograph, rehearse, and film the sequence. The drawing by Ackerman encapsulates the 'rhizomatic' approach to producing creative work under the constraints of parenthood. The 'arborescent' structure of hierarchy encouraged in industrial filmmaking is subsumed in favour of a horizontal structure. This new structure allows for the creative input, and flow of collaboration between all people involved - including the 3 and 5 year olds, who contributed ideas for camera and soundtrack in situ.

  16. ANALISIS POSITIONING RESTORAN CEPAT SAJI

    Directory of Open Access Journals (Sweden)

    Osa Omar Sharif

    2017-04-01

    Full Text Available Penelitian ini bertujuan untuk meneliti positioning restoran cepat saji McDonald's, Kentucky Fried Chicken, California Fried Chicken, A&W, dan Texas Chicken. Penelitian dilakukan di Kota Bandung dengan mengambil sebanyak 400 responden. Analisis yang digunakan dalam penelitian ini adalah analisis multidimensional scaling, analisis memberikan gambaran positioning dari restoran cepat saji yang ditampilkan dalam perceptual map. Restoran cepat saji yang memiliki layanan paling baik adalah McD dan yang memiliki layanan paling buruk adalah CFC. Restoran cepat saji yang memiliki rasa makanan paling enak adalah McD dan yang memiliki rasa makanan tidak enak adalah CFC. KFC dinilai paling ideal karena selalu berhasil menduduki peringkat satu dan dua jika dilihat dari sudut pandang restoran cepat saji yang lain. Pesaing terdekat McD adalah KFC. McD mendapatkan ranking pertama dari segi atribut layanan, kebersihan, variasi makanan, dan rasa makanan. Dengan posisi seperti ini McD seharusnya tetap menjaga kualitas layanan, kebersihan, variasi makanan, dan rasa makanan agar konsumen tetap memilih untuk datang ke McD. KFC sebaiknya tetap menjaga suasana yang membuat konsumen nyaman akan suasana di dalam atau diluar restoran

  17. Position-sensitive proportional counter

    International Nuclear Information System (INIS)

    Kopp, M.K.

    1980-01-01

    A position-sensitive proportional counter circuit uses a conventional (low-resistance, metal-wire anode) counter for spatial resolution of an ionizing event along the anode, which functions as an RC line. A pair of preamplifiers at the anode ends act as stabilized active-capacitance loads, each comprising a series-feedback, low-noise amplifier and a unity-gain, shunt-feedback amplifier whose output is connected through a feedback capacitor to the series-feedback amplifier input. The stabilized capacitance loading of the anode allows distributed RC-line position encoding and subsequent time difference decoding by sensing the difference in rise times of pulses at the anode ends where the difference is primarily in response to the distributed capacitance along the anode. This allows the use of lower resistance wire anodes for spatial radiation detection which simplifies the counter construction of handling of the anodes, and stabilizes the anode resistivity at high count rates (>10 6 counts/sec). (author)

  18. Position-sensitive superconductor detectors

    International Nuclear Information System (INIS)

    Kurakado, M.; Taniguchi, K.

    2016-01-01

    Superconducting tunnel junction (STJ) detectors and superconducting transition- edge sensors (TESs) are representative superconductor detectors having energy resolutions much higher than those of semiconductor detectors. STJ detectors are thin, thereby making it suitable for detecting low-energy X rays. The signals of STJ detectors are more than 100 times faster than those of TESs. By contrast, TESs are microcalorimeters that measure the radiation energy from the change in the temperature. Therefore, signals are slow and their time constants are typically several hundreds of μs. However, TESs possess excellent energy resolutions. For example, TESs have a resolution of 1.6 eV for 5.9-keV X rays. An array of STJs or TESs can be used as a pixel detector. Superconducting series-junction detectors (SSJDs) comprise multiple STJs and a single-crystal substrate that acts as a radiation absorber. SSJDs are also position sensitive, and their energy resolutions are higher than those of semiconductor detectors. In this paper, we give an overview of position-sensitive superconductor detectors.

  19. ROMANIA: GEOGRAPHICAL AND GEOPOLITICAL POSITION

    Directory of Open Access Journals (Sweden)

    Ciprian Beniamin Benea

    2016-12-01

    Full Text Available The paper intends to bring to the reader’s attention the importance of understanding the role education plays in creating a good geopolitical position for a state which has a good geographical position, and which is well endowed in natural resources. The case of Romania is the main focus of the paper. There is presented a peculiar strange situation of a country (Romania which is very well located from geographical point of view but which is incapable to exploit its natural endowments and special location. One reason for this situation is the fact that most people living in present Romania belong to a category named in this paper ‘individuals’. Individuals are not aware of their country’s geography and history, let alone its possible future development possibilities. They do not know the role their country could play, and living in an atomized society, they choose emigration as the easiest way to escape harsh social and economic environment. Contrary to this attitude is that of a citizen, a man conscious about his country’s potential, and which is dedicated to work hardly together with his fellows in order to promote national interests in a peaceful manner. Even there was found remnants of an ancient city close to present day Romanian territory – proves of well endowed environment – moral and psychological factors have contributed after 1990 in an crucial manner to push Romania from its civilization path back to the archaic spirit, from active urban spirit to rural mentality. In such a situation it is not uncommon for a nation to lose its means for projecting power, which could promote the value and the importance of a geographical position – transportation; rural mentality has nothing to do with modern transportation as they are technical tools with geopolitical essence for controlling space. It is a well known fact that transportation and geopolitics are closely interrelated. Furthermore, social dissolution in post communist

  20. The ATLAS positive ion injector

    International Nuclear Information System (INIS)

    Shepard, K.W.; Bollinger, L.M.; Pardo, R.C.

    1990-01-01

    This paper reviews the design, construction status, and beam tests to date of the positive ion injector (PII) which is replacing the tandem injector for the ATLAS heavy-ion facility. PII consists of an ECR ion source on a 350 KV platform injecting a very low velocity superconducting linac. The linac is composed of an independently-phased array of superconducting four-gap interdigital resonators which accelerate over a velocity range of .006 to .05c. In finished form, PII will be able to inject ions as heavy as uranium into the existing ATLAS linac. Although at the present time little more than 50% of the linac is operational, the indenpently-phased array is sufficiently flexible that ions in the lower half of the periodic table can be accelerated and injected into ATLAS. Results of recent operational experience will be discussed. 5 refs

  1. Optical fiber stripper positioning apparatus

    Science.gov (United States)

    Fyfe, Richard W.; Sanchez, Jr., Amadeo

    1990-01-01

    An optical fiber positioning apparatus for an optical fiber stripping device is disclosed which is capable of providing precise axial alignment between an optical fiber to be stripped of its outer jacket and the cutting blades of a stripping device. The apparatus includes a first bore having a width approximately equal to the diameter of an unstripped optical fiber and a counter bore axially aligned with the first bore and dimensioned to precisely receive a portion of the stripping device in axial alignment with notched cutting blades within the stripping device to thereby axially align the notched cutting blades of the stripping device with the axis of the optical fiber to permit the notched cutting blades to sever the jacket on the optical fiber without damaging the cladding on the optical fiber. In a preferred embodiment, the apparatus further includes a fiber stop which permits determination of the length of jacket to be removed from the optical fiber.

  2. GPS Position Time Series @ JPL

    Science.gov (United States)

    Owen, Susan; Moore, Angelyn; Kedar, Sharon; Liu, Zhen; Webb, Frank; Heflin, Mike; Desai, Shailen

    2013-01-01

    Different flavors of GPS time series analysis at JPL - Use same GPS Precise Point Positioning Analysis raw time series - Variations in time series analysis/post-processing driven by different users. center dot JPL Global Time Series/Velocities - researchers studying reference frame, combining with VLBI/SLR/DORIS center dot JPL/SOPAC Combined Time Series/Velocities - crustal deformation for tectonic, volcanic, ground water studies center dot ARIA Time Series/Coseismic Data Products - Hazard monitoring and response focused center dot ARIA data system designed to integrate GPS and InSAR - GPS tropospheric delay used for correcting InSAR - Caltech's GIANT time series analysis uses GPS to correct orbital errors in InSAR - Zhen Liu's talking tomorrow on InSAR Time Series analysis

  3. Quelle préposition ?

    CERN Document Server

    Grevisse, Maurice

    1996-01-01

    Pour bien parler ou bien écrire, il faut avant tout posséder un bon vocabulaire, puis savoir bien remuer les mots, leur faire exprimer quelque chose et agencer adroitement les propositions. Il faut aussi - et cela n'est pas négligeable - amener congrûment les divers compléments des noms, des adjectifs ou des verbes ; quand ces compléments sont de construction indirecte, c'est-à-dire quand ils doivent être introduits par une préposition, on hésite parfois sur la bonne manière de les accrocher. Ne pas négliger le bon choix! Cela ne crée pas le style, sans doute, mais peut, pour une part, témoigner de sa bonne qualité.

  4. Position list word aligned hybrid

    DEFF Research Database (Denmark)

    Deliege, Francois; Pedersen, Torben Bach

    2010-01-01

    Compressed bitmap indexes are increasingly used for efficiently querying very large and complex databases. The Word Aligned Hybrid (WAH) bitmap compression scheme is commonly recognized as the most efficient compression scheme in terms of CPU efficiency. However, WAH compressed bitmaps use a lot...... of storage space. This paper presents the Position List Word Aligned Hybrid (PLWAH) compression scheme that improves significantly over WAH compression by better utilizing the available bits and new CPU instructions. For typical bit distributions, PLWAH compressed bitmaps are often half the size of WAH...... bitmaps and, at the same time, offer an even better CPU efficiency. The results are verified by theoretical estimates and extensive experiments on large amounts of both synthetic and real-world data....

  5. Nasal continuous positive airway pressure

    DEFF Research Database (Denmark)

    Scholze, Alexandra; Lamwers, Stephanie; Tepel, Martin

    2012-01-01

    Obstructive sleep apnoea (OSA) is linked to increased cardiovascular risk. This risk can be reduced by nasal continuous positive airway pressure (nCPAP) treatment. As OSA is associated with an increase of several vasoconstrictive factors, we investigated whether nCPAP influences the digital volume...... pulse wave. We performed digital photoplethysmography during sleep at night in 94 consecutive patients who underwent polysomnography and 29 patients treated with nCPAP. Digital volume pulse waves were obtained independently of an investigator and were quantified using an algorithm for continuous.......01; n = 94) and the arousal index (Spearman correlation, r = 0.21; p CPAP treatment, the AHI was significantly reduced from 27 ± 3 events · h(-1) to 4 ± 2 events · h(-1) (each n = 29; p

  6. Natural head position: An overview.

    Science.gov (United States)

    Meiyappan, N; Tamizharasi, S; Senthilkumar, K P; Janardhanan, K

    2015-08-01

    Cephalometrics has given us a different perspective of interpreting various skeletal problems in the dentofacial complex. Natural head position (NHP) is a reproducible, physiologically determined aspect of function. To determine NHP, a horizontal or vertical reference line outside the crania was used, but preference was given generally to the horizontal. Various intra and extracranial cephalometric horizontal reference planes have been used to formulate diagnosis and plan individualized treatment for an integrated correction of the malocclusion cephalometrics is constantly undergoing refinements in its techniques and analyses to improve the clinical applications. Even though various methods for establishing NHP have been proposed, still it remains a challenge to the clinicians to implement the concept of NHP thoroughly in all the stages of treatment because of practical difficulties in the clinical scenario.

  7. The dilemmas of victim positioning

    DEFF Research Database (Denmark)

    Søndergaard, Dorte Marie

    2015-01-01

    Based on a conceptualization of bullying and relational aggression in groups as an effect of social dynamics rather than individual deficits – this article reflects upon some of the intricate mechanisms and dilemmas involved in victim positioning. Victims of bullying and relational aggression often....... The hopes of (eventual) social belonging may in that sense work paradoxically as a strong agent in the denial of oppression and marginalization. The article is theoretically informed by poststructuralist conceptualizations and grounded in cases of bullying and marginalization (one of them involving rape......). One case is taken from the empirical data produced by the author and a research project on bullying among children (eXbus: Exploring Bullying in School). Two other cases are borrowed from publications of respectively B. Davies from Australia and A. Evaldsson from Shweden. The article opens insights...

  8. Asympotics with positive cosmological constant

    Science.gov (United States)

    Bonga, Beatrice; Ashtekar, Abhay; Kesavan, Aruna

    2014-03-01

    Since observations to date imply that our universe has a positive cosmological constant, one needs an extension of the theory of isolated systems and gravitational radiation in full general relativity from the asymptotically flat to asymptotically de Sitter space-times. In current definitions, one mimics the boundary conditions used in asymptotically AdS context to conclude that the asymptotic symmetry group is the de Sitter group. However, these conditions severely restricts radiation and in fact rules out non-zero flux of energy, momentum and angular momentum carried by gravitational waves. Therefore, these formulations of asymptotically de Sitter space-times are uninteresting beyond non-radiative spacetimes. The situation is compared and contrasted with conserved charges and fluxes at null infinity in asymptotically flat space-times.

  9. The ATLAS positive ion injector

    Energy Technology Data Exchange (ETDEWEB)

    Shepard, K.W.; Bollinger, L.M.; Pardo, R.C.

    1990-01-01

    This paper reviews the design, construction status, and beam tests to date of the positive ion injector (PII) which is replacing the tandem injector for the ATLAS heavy-ion facility. PII consists of an ECR ion source on a 350 KV platform injecting a very low velocity superconducting linac. The linac is composed of an independently-phased array of superconducting four-gap interdigital resonators which accelerate over a velocity range of .006 to .05c. In finished form, PII will be able to inject ions as heavy as uranium into the existing ATLAS linac. Although at the present time little more than 50% of the linac is operational, the indenpently-phased array is sufficiently flexible that ions in the lower half of the periodic table can be accelerated and injected into ATLAS. Results of recent operational experience will be discussed. 5 refs.

  10. Genes Underlying Positive Influence Of Prenatal Environmental ...

    African Journals Online (AJOL)

    Genes Underlying Positive Influence Of Prenatal Environmental Enrichment And ... Prenatal environmental enrichment (EE) has been proven to positively affect but ... Conclusion: The negative-positive prenatal effect could contribute to altered ...

  11. The Role of Positive Emotions in Positive Psychology: The Broaden-and-Build Theory of Positive Emotions.

    Science.gov (United States)

    Fredrickson, Barbara L.

    2001-01-01

    Describes the broaden-and-build theory of positive emotions, situating it within the field of positive psychology. The theory posits that experiences of positive emotions broaden people's momentary thought-action repertoires, which in turn build their enduring personal resources (physical, intellectual, social, and psychological). Reviews…

  12. Spot-Welding Gun With Adjustable Pneumatic Spring

    Science.gov (United States)

    Burley, Richard K.

    1990-01-01

    Proposed spot-welding gun equipped with pneumatic spring, which could be bellows or piston and cylinder, exerts force independent of position along stroke. Applies accurate controlled force to joint welded, without precise positioning at critical position within stroke.

  13. Positivity of spin foam amplitudes

    International Nuclear Information System (INIS)

    Baez, John C; Christensen, J Daniel

    2002-01-01

    The amplitude for a spin foam in the Barrett-Crane model of Riemannian quantum gravity is given as a product over its vertices, edges and faces, with one factor of the Riemannian 10j symbols appearing for each vertex, and simpler factors for the edges and faces. We prove that these amplitudes are always nonnegative for closed spin foams. As a corollary, all open spin foams going between a fixed pair of spin networks have real amplitudes of the same sign. This means one can use the Metropolis algorithm to compute expectation values of observables in the Riemannian Barrett-Crane model, as in statistical mechanics, even though this theory is based on a real-time (e iS ) rather than imaginary-time e -S path integral. Our proof uses the fact that when the Riemannian 10j symbols are nonzero, their sign is positive or negative depending on whether the sum of the ten spins is an integer or half-integer. For the product of 10j symbols appearing in the amplitude for a closed spin foam, these signs cancel. We conclude with some numerical evidence suggesting that the Lorentzian 10j symbols are always nonnegative, which would imply similar results for the Lorentzian Barrett-Crane model

  14. Continuous positive airway pressure (CPAP).

    Science.gov (United States)

    Sahni, R; Wung, J T

    1998-01-01

    Progress in neonatal intensive care is closely linked to improvements in the management of respiratory failure in small infants. This applies to the care of the preterm infants with immature lungs, and also to treatment of the preterm or full term infants with specific diseases that are associated with respiratory failure. Respiratory distress of the newborn continues to account for significant morbidity in the intensive care unit. The spectrum of disease ranges from mild distress to severe respiratory failure requiring varying degrees of support. The current modalities of ventilatory assistance range from the more benign continuous positive airway pressure (CPAP) to conventional mechanical ventilation, and on to high frequency ventilation. It is a reasonable supposition that the type of ventilatory assistance provided to these infants should be graded according to the severity of the disease. However, the principal objective in selecting the mode of respiratory support should be to use a modality which results in minimal volo- or barotrauma to the infant. The following detailed description on CPAP explains its physiological effects, delivery system, indications for use, application, maintenance, and associated complications. The equipment described is simple to use, has a greater cost benefit, and has a more universal application, which is of help to smaller units including those in the developing parts of the world. We have also included our institutional clinical experience of CPAP usage in very low birth weight infants from the periods before and after commercial availability of surfactant in the United States.

  15. Uniquely positioned for future success

    International Nuclear Information System (INIS)

    Thorn, D.

    2001-01-01

    The author began this presentation by giving a corporate profile of PanCanadian, discussing its evolution over time to it being spun-off of PanCanadian Petroleum Limited from Canadian Pacific to form PanCanadian Energy Corporation in 2001. The worldwide activities were mentioned. PanCanadian Petroleum Limited is one of the country's largest producers, experiencing emerging international exploration success, and marketing energy throughout North America. It is also a company that is financially strong. PanCanadian is involved in natural gas, crude, natural gas liquids, and power. An outline of PanCanadian Energy Services was provided, along with its strategic positioning. The next section of the presentation focused on Nova Scotia natural gas, beginning with a map displaying the Eastern Canada development. The focus shifted to the Deep Panuke field, where exploration began in early 1999. PanCanadian holds 20 per cent of the Scotian Shelf. The industry activity offshore Nova Scotia began with the first well in 1967, and to date 178 wells have been drilled, of which 106 were exploration wells. There have been 21 significant discoveries. Production in the Deep Panuke is expected to begin during the first quarter of 2005. The various approval agencies were listed. With large interests held in the offshore Nova Scotia and extensive exploration plans, PanCanadian opportunity in Eastern Canada, New England and the Mid-Atlantic markets has greatly increased. refs., tabs., figs

  16. Position Error Covariance Matrix Validation and Correction

    Science.gov (United States)

    Frisbee, Joe, Jr.

    2016-01-01

    In order to calculate operationally accurate collision probabilities, the position error covariance matrices predicted at times of closest approach must be sufficiently accurate representations of the position uncertainties. This presentation will discuss why the Gaussian distribution is a reasonable expectation for the position uncertainty and how this assumed distribution type is used in the validation and correction of position error covariance matrices.

  17. A different perspective: introducing positive criminology.

    Science.gov (United States)

    Ronel, Natti; Elisha, Ety

    2011-04-01

    Positive criminology is a new conceptual perspective of criminology, encompassing several theories and models. Positive criminology refers to a focus on individuals' encounters with forces and influences that are experienced as positive, which distance them from deviance and crime, whether by means of formal and informal therapy programs and interventions, such as self-help groups; through emphasis of positive social elements, such as exposure to goodness, social acceptance, and reintegrative shaming; or based on positive personal traits, such as resilience and coherence. The perspective of positive criminology broadens that of traditional criminology, which focuses mainly on understanding the factors and processes that lead individuals and groups to what is defined as deviant and criminal behavior. Positive criminology is implemented in treatment and rehabilitation of individuals and groups that have demonstrated deviant and criminal behavior, by emphasizing positive experiences that may potentially prevent or discourage continued criminal behavior. Positive criminology is also expressed in prevention based on a positive approach.

  18. Body position and late postoperative nocturnal hypoxaemia

    DEFF Research Database (Denmark)

    Rosenberg-Adamsen, S; Stausholm, K; Edvardsen, L

    1997-01-01

    Thirteen patients were monitored for nocturnal body position (supine vs. side) and arterial oxygen saturation pre-operatively and on the second postoperative night after major abdominal surgery. The number of positional changes were significantly decreased after operation (p ... position than on the side (p movements....... towards more time spent in the supine position (p = 0.1). Individual mean arterial oxygen saturation decreased postoperatively (p positions (p = 0.9). Pre-operatively, episodic desaturations were significantly more frequent in the supine...

  19. Grounds of two positions photovoltaic panels

    OpenAIRE

    Castán Fortuño, Fernando

    2008-01-01

    The objective of this Master Thesis is to find the optimum positioning for a two positions photovoltaic panel. Hence, it will be implemented a model in order to optimize the energy of the sun that the photovoltaic panel is receiving by its positioning. Likewise this project will include the comparison with other photovoltaic panel systems as the single position photovoltaics panels. Ultimately, it is also going to be designed a system array for the optimized model of two positions photovoltai...

  20. Scalability Optimization of Seamless Positioning Service

    Directory of Open Access Journals (Sweden)

    Juraj Machaj

    2016-01-01

    Full Text Available Recently positioning services are getting more attention not only within research community but also from service providers. From the service providers point of view positioning service that will be able to work seamlessly in all environments, for example, indoor, dense urban, and rural, has a huge potential to open new markets. However, such system does not only need to provide accurate position estimates but have to be scalable and resistant to fake positioning requests. In the previous works we have proposed a modular system, which is able to provide seamless positioning in various environments. The system automatically selects optimal positioning module based on available radio signals. The system currently consists of three positioning modules—GPS, GSM based positioning, and Wi-Fi based positioning. In this paper we will propose algorithm which will reduce time needed for position estimation and thus allow higher scalability of the modular system and thus allow providing positioning services to higher amount of users. Such improvement is extremely important, for real world application where large number of users will require position estimates, since positioning error is affected by response time of the positioning server.

  1. [Anesthesia ventilators].

    Science.gov (United States)

    Otteni, J C; Beydon, L; Cazalaà, J B; Feiss, P; Nivoche, Y

    1997-01-01

    To review anaesthesia ventilators in current use in France by categories of ventilators. References were obtained from computerized bibliographic search. (Medline), recent review articles, the library of the service and personal files. Anaesthesia ventilators can be allocated into three groups, depending on whether they readminister expired gases or not or allow both modalities. Contemporary ventilators provide either constant volume ventilation, or constant pressure ventilation, with or without a pressure plateau. Ventilators readministering expired gases after CO2 absorption, or closed circuit ventilators, are either of a double- or a single-circuit design. Double-circuit ventilators, or pneumatical bag or bellows squeezers, or bag-in-bottle or bellows-in-bottle (or box) ventilators, consist of a primary, or driving circuit (bottle or box) and a secondary or patient circuit (including a bag or a bellows or membrane chambers). Bellows-in-bottle ventilators have either standing bellows ascending at expiration, or hanging bellows, descending at expiration. Ascending bellows require a positive pressure of about 2 cmH2O throughout exhalation to allow the bellows to refill. The expired gas volume is a valuable indicator for leak and disconnection. Descending bellows generate a slight negative pressure during exhalation. In case of leak or disconnection they aspirate ambient air and cannot act therefore as an indicator for integrity of the circuit and the patient connection. Closed circuit ventilators with a single-circuit (patient circuit) include a insufflating device consisting either in a bellows or a cylinder with a piston, operated by a electric or pneumatic motor. As the hanging bellows of the double circuit ventilators, they generate a slight negative pressure during exhalation and aspirate ambient air in case of leak or disconnection. Ventilators not designed for the readministration of expired gases, or open circuit ventilators, are generally stand

  2. The Role of Positive Emotions in Positive Psychology: The Broaden-and-Build Theory of Positive Emotions

    OpenAIRE

    Fredrickson, Barbara L.

    2001-01-01

    In this article, the author describes a new theoretical perspective on positive emotions and situates this new perspective within the emerging field of positive psychology. The broaden-and-build theory posits that experiences of positive emotions broaden people's momentary thought-action repertoires, which in turn serves to build their enduring personal resources, ranging from physical and intellectual resources to social and psychological resources. Preliminary empirical evidence supporting ...

  3. PerPos: a Translucent Positioning Middleware Supporting Adaptation of Internal Positioning Processes

    DEFF Research Database (Denmark)

    Jensen, Jakob Langdal; Schougaard, Kari Rye; Kjærgaard, Mikkel Baun

    2010-01-01

    of application specific features that can be applied to the internal position processing of the middleware. To evaluate these capabilities we extend the internal position processing of the middleware with functionality supporting probabilistic position tracking and strategies for minimization of the energy......A positioning middleware benefits the development of location aware applications. Traditionally, positioning middleware provides position transparency in the sense that it hides low-level details. However, many applications require access to specific details of the usually hidden positioning...

  4. Self-calibrating solar position sensor

    Science.gov (United States)

    Maxey, Lonnie Curt

    2018-01-30

    A sun positioning sensor and method of accurately tracking the sun are disclosed. The sensor includes a position sensing diode and a disk having a body defining an aperture for accepting solar light. An extension tube having a body that defines a duct spaces the position sensing diode from the disk such that the solar light enters the aperture in the disk, travels through the duct in the extension tube and strikes the position sensing diode. The extension tube has a known length that is fixed. Voltage signals indicative of the location and intensity of the sun are generated by the position sensing diode. If it is determined that the intensity values are unreliable, then historical position values are used from a table. If the intensity values are deemed reliable, then actual position values are used from the position sensing diode.

  5. Vehicle positioning trade study for ITS applications.

    Science.gov (United States)

    2011-08-01

    This report summarizes the results of a detailed positioning study intended to evaluate various positioning technologies and their applicability to a suite of location dependent vehicle safety and mobility applications. The initial phases of the stud...

  6. Women in Managerial Positions in Greek Education.

    Science.gov (United States)

    Athanassoula-Reppa, Anastasia; Koutouzis, Manolis

    2002-01-01

    Discusses the under representation of women in managerial positions in Greece and the evidence of barriers that inhibit women from pursuing and taking such positions, a type of covert discrimination that is counter to notions of democratic citizenship. (SLD)

  7. Positivity for Convective Semi-discretizations

    KAUST Repository

    Fekete, Imre; Ketcheson, David I.; Loczi, Lajos

    2017-01-01

    We propose a technique for investigating stability properties like positivity and forward invariance of an interval for method-of-lines discretizations, and apply the technique to study positivity preservation for a class of TVD semi-discretizations

  8. Positions in doctors' questions during psychiatric interviews.

    Science.gov (United States)

    Ziółkowska, Justyna

    2009-11-01

    In this article I apply the concept of positioning to the analysis of 15 initial psychiatric interviews. I argue that through their questions the psychiatrists-in-training impose positions requiring the patients to gaze at themselves and their actual problems from particular perspectives. I point to three such positions: (a) the position of the observing assessor, from which it is expected that the patients will make a detached assessment of themselves or their problems, (b) the position of the informing witness, which requires the patients only to verify the information about themselves, and (c) the marginal one, the position of the experiencing narrator, from which talk about experiences and problems is expected. I explore the roots and consequences of the positions, with particular attention toward objectivization of the patients' experiences in the dominant witness and assessor positions. I conclude with a discussion about the medical model in psychiatry.

  9. Optogenetic control of organelle transport and positioning

    NARCIS (Netherlands)

    van Bergeijk, Petra; Adrian, Max; Hoogenraad, Casper C; Kapitein, Lukas C

    2015-01-01

    Proper positioning of organelles by cytoskeleton-based motor proteins underlies cellular events such as signalling, polarization and growth. For many organelles, however, the precise connection between position and function has remained unclear, because strategies to control intracellular organelle

  10. Menopausal women's positive experience of growing older

    DEFF Research Database (Denmark)

    Hvas, Lotte

    2006-01-01

    This paper aims to describe menopausal women's positive experience of growing older and becoming middle-aged.......This paper aims to describe menopausal women's positive experience of growing older and becoming middle-aged....

  11. Hypnagogic Exploration: Sleep Positions and Personality.

    Science.gov (United States)

    Domino, George; Bohn, Sarah Ann

    1980-01-01

    Sleep positions, particularly the full fetal position, appear to be related to California Psychological Inventory (CPI) variables of sociability, sense of well being, achievement by conformance, femininity, and social maturity. (Author)

  12. Appreciative Pedagogy: Constructing Positive Models for Learning.

    Science.gov (United States)

    Yballe, Leodones; O'Connor, Dennis

    2000-01-01

    Appreciative inquiry, an approach focused on generation of a vision for an organization, may be adapted for management classes. Students and teachers conduct collaborative inquiry into successful experiences, creating positive images that generate positive action in the classroom. (SK)

  13. Nutrition and HIV-Positive Pregnancy

    Science.gov (United States)

    Montgomery, Kristen S.

    2003-01-01

    When an HIV-positive woman becomes pregnant, additional nutritional considerations are warranted. Compared to routine prenatal nutritional assessment and intervention, pregnant HIV-positive women have increased needs to promote a healthy outcome. This column contains information on HIV and pregnancy, nutrition and infection, and nutrition for HIV-positive pregnancy. This content can be integrated into childbirth education settings to improve care to women who are HIV-positive. PMID:17273329

  14. Product Differentiation and Positioning: Confused Concepts

    OpenAIRE

    Shaheen Borna; Joseph Chapman

    1993-01-01

    This article examines two common marketing terms: product positioning and product differentiation. Many authors use these terms interchangeably, yet most marketing texts treat product positioning and product differentiation as two seperate concepts. This article attempts to identify the underlying concepts of both product differentiation and product positioning. Product differentiation is shown to be a special case of product positioning: therefore, it is suggested that marketers may want to ...

  15. Nutrition and HIV-Positive Pregnancy

    OpenAIRE

    Montgomery, Kristen S.

    2003-01-01

    When an HIV-positive woman becomes pregnant, additional nutritional considerations are warranted. Compared to routine prenatal nutritional assessment and intervention, pregnant HIV-positive women have increased needs to promote a healthy outcome. This column contains information on HIV and pregnancy, nutrition and infection, and nutrition for HIV-positive pregnancy. This content can be integrated into childbirth education settings to improve care to women who are HIV-positive.

  16. 28 CFR 345.20 - Position classification.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Position classification. 345.20 Section... INDUSTRIES (FPI) INMATE WORK PROGRAMS Position Classification § 345.20 Position classification. (a) Inmate... the objectives and principles of pay classification as a part of the routine orientation of new FPI...

  17. 30 CFR 56.7052 - Drilling positions.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Drilling positions. 56.7052 Section 56.7052... SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Drilling and Rotary Jet Piercing Drilling § 56.7052 Drilling positions. Persons shall not drill from— (a) Positions which hinder...

  18. Analysis of Naval Ammunition Stock Positioning

    Science.gov (United States)

    2015-12-01

    not manipulated to be in favor of any system based on the assumption that stock positioned closer to demand would result in more favorable delivery...NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA MBA PROFESSIONAL REPORT ANALYSIS OF NAVAL AMMUNITION STOCK POSITIONING...professional report 4. TITLE AND SUBTITLE ANALYSIS OF NAVAL AMMUNITION STOCK POSITIONING 5. FUNDING NUMBERS 6. AUTHOR(S) David Sharp and Eric

  19. CSR Position in the Top Management Team

    DEFF Research Database (Denmark)

    Strand, Robert

    Recently, a number of positions with corporate social responsibility (CSR) in the position title have been introduced to the top management teams (TMTs) of some of the world’s largest corporations. I explore this phenomenon. I revisit 10 such positions identified in a previous study to add...

  20. Consistent feeding positions of great tit parents

    NARCIS (Netherlands)

    Lessells, C.M.; Poelman, E.H.; Mateman, A.C.; Cassey, Ph.

    2006-01-01

    When parent birds arrive at the nest to provision their young, their position on the nest rim may influence which chick or chicks are fed. As a result, the consistency of feeding positions of the individual parents, and the difference in position between the parents, may affect how equitably food is

  1. Low sputum smear positive tuberculosis among pulmonary ...

    African Journals Online (AJOL)

    Low sputum smear positive tuberculosis among pulmonary tuberculosis suspects in a tertiary hospital in Mwanza, Tanzania. ... The risk factors among smear positive TB patients were co-illness (32.5%), previous history of TB (7.5%) and history of positive TB contact (4.7%). These findings also show that as CD4+ T Cells ...

  2. Commentary: Positive Youth Development Goes Mainstream.

    Science.gov (United States)

    Moore, Kristin A

    2017-07-01

    Evidence has accumulated that confirms the success of a positive youth development (PYD) approach. Importantly, a positive development approach is just that-an approach. It is not a particular program or curriculum but a set of practices designed to achieve one or more positive outcomes. As such, PYD practices can be added onto other programs to make positive outcomes more likely. For example, a tutoring program can work hard to hire and train staff to work with students in a trusting, respectful relationship. Camp counselors can be encouraged to build rapport and positive bonds among the campers. © 2017 The Author. Child Development © 2017 Society for Research in Child Development, Inc.

  3. Study of positioning techniques for radiography

    International Nuclear Information System (INIS)

    Maruyama, Toshinori; Yamamoto, Hideki

    2008-01-01

    A good positioning technique is of great importance in radiology in order to obtain accurate diagnostic information and reduce the patient's X-ray exposure. In positioning training, students place the phantom on the table under an X-ray tube, adjust the position of the phantom, and repeat the positioning practices until they can obtain fine diagnostic images. As X-ray films are usually used in radiography, the development of such films is necessary. In this kind of training practice, it takes a great deal of time to obtain the X-ray image at the phantom position. It is desirable for students to perform positioning accurately and to confirm the results of positioning within a short time. In this article, we propose a new positioning training method using digital image processing. First, we scan the skull phantom by CT (computed tomography) and obtain CT images. Next, we measure the positioning information of the phantom under the X-ray equipment by using scene analysis. Then, we develop a method that produces the plane image corresponding to the detected phantom position under the X-ray tube. It is expected that our method will be useful as a teaching device to help in the practice of the positioning techniques for various organs without X-ray exposure and, furthermore, in the development of X-ray films. (author)

  4. Control rod position detector for nuclear reactor

    International Nuclear Information System (INIS)

    Kudo, Mitsuru; Fujiwara, Hiroshi.

    1981-01-01

    Purpose: To improve the reliability of a control rod position detector by detecting a reactive code with a combination of control rod position change signals produced from vertical and horizontal axis decoders, generation an error signal and thus simultaneously detecting the operation of more than two lead switches. Constitution: Horizontal and vertical axis position signals responsive to changes in the control rod position are applied from lead switches connected in a predetermined matrix connection corresponding to the notches of the positions of respective position detecting probes, the reactive output from the decoder is detected by a reactive code detecting circuit, which in turn generates a fault signal, and the control rod position code converted in a notch number generating circuit is converted to a predetermined value indicating invalidity. Accordingly, a fault caused by the simultaneous operation of a plurality of failed lead switches can be effectively detected. (Yoshino, Y.)

  5. Theoretical optimum of implant positional index design.

    Science.gov (United States)

    Semper, W; Kraft, S; Krüger, T; Nelson, K

    2009-08-01

    Rotational freedom of the implant-abutment connection influences its screw joint stability; for optimization, influential factors need to be evaluated based on a previously developed closed formula. The underlying hypothesis is that the manufacturing tolerances, geometric pattern, and dimensions of the index do not influence positional stability. We used the dimensions of 5 commonly used implant systems with a clearance of 20 microm to calculate the extent of rotational freedom; a 3D simulation (SolidWorks) validated the analytical findings. Polygonal positional indices showed the highest degrees of rotational freedom. The polygonal profile displayed higher positional stability than the polygons, but less positional accuracy than the cam-groove connection. Features of a maximal rotation-safe positional index were determined. The analytical calculation of rotational freedom of implant positional indices is possible. Rotational freedom is dependent on the geometric design of the index and may be decreased by incorporating specific aspects into the positional index design.

  6. POSITIVE LEADERSHIP MODELS: THEORETICAL FRAMEWORK AND RESEARCH

    Directory of Open Access Journals (Sweden)

    Javier Blanch, Francisco Gil

    2016-09-01

    Full Text Available The objective of this article is twofold; firstly, we establish the theoretical boundaries of positive leadership and the reasons for its emergence. It is related to the new paradigm of positive psychology that has recently been shaping the scope of organizational knowledge. This conceptual framework has triggered the development of the various forms of positive leadership (i.e. transformational, servant, spiritual, authentic, and positive. Although the construct does not seem univocally defined, these different types of leadership overlap and share a significant affinity. Secondly, we review the empirical evidence that shows the impact of positive leadership in organizations and we highlight the positive relationship between these forms of leadership and key positive organizational variables. Lastly, we analyse future research areas in order to further develop this concept.

  7. a Continuous-Time Positive Linear System

    Directory of Open Access Journals (Sweden)

    Kyungsup Kim

    2013-01-01

    Full Text Available This paper discusses a computational method to construct positive realizations with sparse matrices for continuous-time positive linear systems with multiple complex poles. To construct a positive realization of a continuous-time system, we use a Markov sequence similar to the impulse response sequence that is used in the discrete-time case. The existence of the proposed positive realization can be analyzed with the concept of a polyhedral convex cone. We provide a constructive algorithm to compute positive realizations with sparse matrices of some positive systems under certain conditions. A sufficient condition for the existence of a positive realization, under which the proposed constructive algorithm works well, is analyzed.

  8. Emotional Effects of Positive Forms of Communication

    Directory of Open Access Journals (Sweden)

    Светлана Валентиновна Ионова

    2015-12-01

    Full Text Available The article discusses the problem of emotional significance of a positive form of speech. Based on the methodology of emotions linguistics, linguoecology, communicative linguistics and the methods of description, comparison and discourse analysis, the author distinguishes some types of speech situations that demonstrate visible differences between positive expression of emotions and their content and the pragmatic effect. The difference between the notions of “positive communication” and “positive form of communication” is demonstrated. Special attention is given to the following types of positive emotional communication: tolerant emotional communication, emotional emphasis, emotional neglect, and emotional tabooing. The utterances in situations of real and textual communication demonstrate negative effects of statements expressed in a positive form and identify the specifics of positive forms of emotional communication in comparison with rational communication.

  9. 5th International Symposium on Positive Systems

    CERN Document Server

    Farina, Lorenzo; Setola, Roberto; Germani, Alfredo

    2017-01-01

    This book presents high-quality original contributions on positive systems, including topics such as: monotone dynamical systems in mathematical biology and game theory; mathematical developments for networked systems in biology, chemistry and the social sciences; linear and nonlinear positive operators; dynamical analysis, observation and control of positive distributed parameter systems; stochastic realization theory; biological systems with positive variables and positive controls; iterated function systems; nonnegative dynamic processes; and dimensioning problems for collaborative systems. The book comprises a selection of the best papers presented at the POSTA 2016, the 5th International Symposium on Positive Systems, which was held in Rome, Italy, in September 2016. This conference series represents a targeted response to the growing need for research that reports on and critically discusses a wide range of topics concerning the theory and applications of positive systems.

  10. The added value of the positive : A literature review of positive psychology interventions in organizations

    NARCIS (Netherlands)

    Meyers, M.C.; van Woerkom, M.; Bakker, A.

    2013-01-01

    This paper systematically reviews research investigating the effects of positive psychology interventions applied in the organizational context. We characterize a positive psychology intervention as any intentional activity or method that is based on (a) the cultivation of positive subjective

  11. Precise positioning of patients for radiation therapy

    International Nuclear Information System (INIS)

    Verhey, L.J.; Goitein, M.; McNulty, P.; Munzenrider, J.E.; Suit, H.D.

    1982-01-01

    A number of immobilization schemes which permit precise daily positioning of patients for radiation therapy are discussed. Pretreatment and post-treatment radiographs have been taken with the patient in the treatment position and analyzed to determine the amount of intratreatment movement. Studies of patients in the supine, seated and decubitus positions indicate mean movements of less than 1 mm with a standard deviation of less than 1 mm. Patients immobilized in the seated position with a bite block and a mask have a mean movement of about 0.5 mm +/- 0.3 mm (s.d.), and patients immobilized in the supine position with their necks hyperextended for submental therapy evidence a mean movement of about 1.4 mm +/- 0.9 mm (s.d.). With the exception of those used for the decubitus position, the immobilization devices are simply fabricated out of thermoplastic casting materials readily available from orthopedic supply houses. A study of day-to-day reproducibility of patient position using laser alignment and pretreatment radiographs for final verification of position indicates that the initial laser alignment can be used to position a patient within 2.2 mm +/- 1.4 mm (s.d.) of the intended position. These results indicate that rigid immobilization devices can improve the precision of radiotherapy, which would be advantageous with respect to both tumor and normal tissue coverage in certain situations

  12. Positive psychiatry: its time has come.

    Science.gov (United States)

    Jeste, Dilip V; Palmer, Barton W; Rettew, David C; Boardman, Samantha

    2015-06-01

    Traditionally, psychiatry has been defined and practiced as a branch of medicine focused on the diagnosis and treatment of mental illnesses. Based on growing empirical evidence, we believe that this definition warrants expansion to include the concept of positive psychiatry. In the present article, we provide a critical overview of this emerging field and a select review of relevant scientific literature. Positive psychiatry may be defined as the science and practice of psychiatry that seeks to understand and promote well-being through assessment and interventions involving positive psychosocial characteristics (PPCs) in people who suffer from or are at high risk of developing mental or physical illnesses. It can also benefit nonclinical populations. Positive psychiatry has 4 main components: (1) positive mental health outcomes (eg, well-being), (2) PPCs that comprise psychological traits (resilience, optimism, personal mastery and coping self-efficacy, social engagement, spirituality and religiosity, and wisdom-including compassion) and environmental factors (family dynamics, social support, and other environmental determinants of overall health), (3) biology of positive psychiatry constructs, and (4) positive psychiatry interventions including preventive ones. There are promising empirical data to suggest that positive traits may be improved through psychosocial and biological interventions. As a branch of medicine rooted in biology, psychiatry, especially with the proposed conceptualization of positive psychiatry, is well poised to provide major contributions to the positive mental health movement, thereby impacting the overall health care of the population. © Copyright 2015 Physicians Postgraduate Press, Inc.

  13. Intrapartum Ultrasound Assessment of Fetal Spine Position

    Directory of Open Access Journals (Sweden)

    Salvatore Gizzo

    2014-01-01

    Full Text Available We investigated the role of foetal spine position in the first and second labour stages to determine the probability of OPP detection at birth and the related obstetrical implications. We conducted an observational-longitudinal cohort study on uncomplicated cephalic single foetus pregnant women at term. We evaluated the accuracy of ultrasound in predicting occiput position at birth, influence of fetal spine in occiput position during labour, labour trend, analgesia request, type of delivery, and indication to CS. The accuracy of the foetal spinal position to predict the occiput position at birth was high at the first labour stage. At the second labour stage, CS (40.3% and operative vaginal deliveries (23.9% occurred more frequently in OPP than in occiput anterior position (7% and 15.2%, resp., especially in cases of the posterior spine. In concordant posterior positions labour length was greater than other ones, and analgesia request rate was 64.1% versus 14.7% for all the others. The assessment of spinal position could be useful in obstetrical management and counselling, both before and during labour. The detection of spinal position, more than OPP, is predictive of successful delivery. In concordant posterior positions, the labour length, analgesia request, operative delivery, and caesarean section rate are higher than in the other combination.

  14. Positive Psychiatry: Its Time Has Come

    Science.gov (United States)

    Jeste, Dilip V.; Palmer, Barton W.; Rettew, David C.; Boardman, Samantha

    2017-01-01

    Traditionally, psychiatry has been defined and practiced as a branch of medicine focused on the diagnosis and treatment of mental illnesses. Based on growing empirical evidence, we believe that this definition warrants expansion to include the concept of positive psychiatry. In the present article we provide a critical overview of this emerging field and a select review of relevant scientific literature. Positive psychiatry may be defined as the science and practice of psychiatry that seeks to understand and promote well-being through assessment and interventions involving positive psychosocial characteristics (PPCs) in people who suffer from or are at high risk of developing mental or physical illnesses. It can also benefit non-clinical populations. Positive psychiatry has 4 main components: (1) positive mental health outcomes (e.g., well-being), (2) PPCs that comprise psychological traits (resilience, optimism, personal mastery and coping self-efficacy, social engagement, spirituality and religiosity, and wisdom - including compassion) and environmental factors (family dynamics, social support, and other environmental determinants of overall health), (3) biology of positive psychiatry constructs, and (4) positive psychiatry Interventions including preventive ones. There are promising empirical data to suggest that positive traits may be improved through psychosocial and biological interventions. As a branch of medicine, rooted in biology, psychiatry, especially with the proposed conceptualization of positive psychiatry, is well poised to provide major contributions to the positive mental health movement, thereby impacting the overall healthcare of the population. PMID:26132670

  15. Quantum turbulence of bellows-driven .sup.4./sup.He superflow: decay

    Czech Academy of Sciences Publication Activity Database

    Babuin, Simone; Varga, E.; Vinen, W. F.; Skrbek, L.

    2015-01-01

    Roč. 92, č. 18 (2015), "184503-1"-"184503-13" ISSN 1098-0121 Institutional support: RVO:68378271 Keywords : vortex-line density * counterflow turbulence * quantum turbulence Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.736, year: 2014

  16. Effect of different treatments of copper surface on its total hemispherical absorptivity bellow 77 K

    Czech Academy of Sciences Publication Activity Database

    Musilová, Věra; Králík, Tomáš; Hanzelka, Pavel; Srnka, Aleš

    2007-01-01

    Roč. 47, č. 4 (2007), s. 257-261 ISSN 0011-2275 R&D Projects: GA AV ČR IBS2065109 Institutional research plan: CEZ:AV0Z20650511 Keywords : metals * structural materials * heat transfer * radiant properties * cryostats Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering Impact factor: 0.981, year: 2007

  17. Detector Position Estimation for PET Scanners.

    Science.gov (United States)

    Pierce, Larry; Miyaoka, Robert; Lewellen, Tom; Alessio, Adam; Kinahan, Paul

    2012-06-11

    Physical positioning of scintillation crystal detector blocks in Positron Emission Tomography (PET) scanners is not always exact. We test a proof of concept methodology for the determination of the six degrees of freedom for detector block positioning errors by utilizing a rotating point source over stepped axial intervals. To test our method, we created computer simulations of seven Micro Crystal Element Scanner (MiCES) PET systems with randomized positioning errors. The computer simulations show that our positioning algorithm can estimate the positions of the block detectors to an average of one-seventh of the crystal pitch tangentially, and one-third of the crystal pitch axially. Virtual acquisitions of a point source grid and a distributed phantom show that our algorithm improves both the quantitative and qualitative accuracy of the reconstructed objects. We believe this estimation algorithm is a practical and accurate method for determining the spatial positions of scintillation detector blocks.

  18. Detector position estimation for PET scanners

    International Nuclear Information System (INIS)

    Pierce, Larry; Miyaoka, Robert; Lewellen, Tom; Alessio, Adam; Kinahan, Paul

    2012-01-01

    Physical positioning of scintillation crystal detector blocks in Positron Emission Tomography (PET) scanners is not always exact. We test a proof of concept methodology for the determination of the six degrees of freedom for detector block positioning errors by utilizing a rotating point source over stepped axial intervals. To test our method, we created computer simulations of seven Micro Crystal Element Scanner (MiCES) PET systems with randomized positioning errors. The computer simulations show that our positioning algorithm can estimate the positions of the block detectors to an average of one-seventh of the crystal pitch tangentially, and one-third of the crystal pitch axially. Virtual acquisitions of a point source grid and a distributed phantom show that our algorithm improves both the quantitative and qualitative accuracy of the reconstructed objects. We believe this estimation algorithm is a practical and accurate method for determining the spatial positions of scintillation detector blocks.

  19. New Schemes for Positive Real Truncation

    Directory of Open Access Journals (Sweden)

    Kari Unneland

    2007-07-01

    Full Text Available Model reduction, based on balanced truncation, of stable and of positive real systems are considered. An overview over some of the already existing techniques are given: Lyapunov balancing and stochastic balancing, which includes Riccati balancing. A novel scheme for positive real balanced truncation is then proposed, which is a combination of the already existing Lyapunov balancing and Riccati balancing. Using Riccati balancing, the solution of two Riccati equations are needed to obtain positive real reduced order systems. For the suggested method, only one Lyapunov equation and one Riccati equation are solved in order to obtain positive real reduced order systems, which is less computationally demanding. Further it is shown, that in order to get positive real reduced order systems, only one Riccati equation needs to be solved. Finally, this is used to obtain positive real frequency weighted balanced truncation.

  20. Experiences matter: Positive emotions facilitate intrinsic motivation

    OpenAIRE

    Løvoll, Helga Synnevåg; Røysamb, Espen; Vittersø, Joar

    2017-01-01

    This paper has two major aims. First, to investigate how positive emotions and intrinsic motivation affect each other over time. Second, to test the effect of positive emotions and intrinsic motivation on subsequent educational choices. Through two ordinary study semesters, 64 sport students in Norway reported on their intrinsic motivation for outdoor activities (twice) as well as positive emotions after two three-day outdoor events (four times). Next autumn, students study choice was collect...

  1. Experiences matter: Positive emotions facilitate intrinsic motivation

    OpenAIRE

    Løvoll, Helga Synnevåg; Røysamb, Espen; Vittersø, Joar

    2017-01-01

    https://doi.org/10.1080/23311908.2017.1340083 This paper has two major aims. First, to investigate how positive emotions and intrinsic motivation affect each other over time. Second, to test the effect of positive emotions and intrinsic motivation on subsequent educational choices. Through two ordinary study semesters, 64 sport students in Norway reported on their intrinsic motivation for outdoor activities (twice) as well as positive emotions after two three-day outdoor e...

  2. Why Libertarians Should Reject Positive Rights

    OpenAIRE

    Joshua Katz

    2009-01-01

    Maloberti, in “Why Libertarians Should Accept Positive Rights” argues that, as normally presented, libertarianism entails anarchism. He argues that libertarians should, therefore, accept a limited form of positive rights, which will allow for the creation of a libertarian government. In this paper, it is argued that the entailment of anarchism is not a problem for libertarianism, and that the form of positive rights endorsed by Maloberti is unfounded, ill-defined, and inconsistent with libe...

  3. Transformation of gram positive bacteria by sonoporation

    Science.gov (United States)

    Yang, Yunfeng; Li, Yongchao

    2014-03-11

    The present invention provides a sonoporation-based method that can be universally applied for delivery of compounds into Gram positive bacteria. Gram positive bacteria which can be transformed by sonoporation include, for example, Bacillus, Streptococcus, Acetobacterium, and Clostridium. Compounds which can be delivered into Gram positive bacteria via sonoporation include nucleic acids (DNA or RNA), proteins, lipids, carbohydrates, viruses, small organic and inorganic molecules, and nano-particles.

  4. Emotional Effects of Positive Forms of Communication

    OpenAIRE

    Светлана Валентиновна Ионова

    2015-01-01

    The article discusses the problem of emotional significance of a positive form of speech. Based on the methodology of emotions linguistics, linguoecology, communicative linguistics and the methods of description, comparison and discourse analysis, the author distinguishes some types of speech situations that demonstrate visible differences between positive expression of emotions and their content and the pragmatic effect. The difference between the notions of “positive communication” and “pos...

  5. Position Statement on Active Outdoor Play

    OpenAIRE

    Tremblay, Mark S.; Gray, Casey; Babcock, Shawna; Barnes, Joel; Costas Bradstreet, Christa; Carr, Dawn; Chabot, Guylaine; Choquette, Louise; Chorney, David; Collyer, Cam; Herrington, Susan; Janson, Katherine; Janssen, Ian; Larouche, Richard; Pickett, William

    2015-01-01

    A diverse, cross-sectorial group of partners, stakeholders and researchers, collaborated to develop an evidence-informed Position Statement on active outdoor play for children aged 3–12 years. The Position Statement was created in response to practitioner, academic, legal, insurance and public debate, dialogue and disagreement on the relative benefits and harms of active (including risky) outdoor play. The Position Statement development process was informed by two systematic reviews, a critic...

  6. Future directions for positive body image research

    OpenAIRE

    Halliwell, E.

    2015-01-01

    The emergence of positive body image research during the last 10 years represents an important shift in the body image literature. The existing evidence provides a strong empirical basis for the study of positive body image and research has begun to address issues of age, gender, ethnicity, culture, development, and intervention in relation to positive body image. This article briefly reviews the existing evidence before outlining directions for future research. Specifically, six areas for fu...

  7. Why Libertarians Should Reject Positive Rights

    Directory of Open Access Journals (Sweden)

    Joshua Katz

    2009-01-01

    Full Text Available Maloberti, in “Why Libertarians Should Accept Positive Rights” argues that, as normally presented, libertarianism entails anarchism. He argues that libertarians should, therefore, accept a limited form of positive rights, which will allow for the creation of a libertarian government. In this paper, it is argued that the entailment of anarchism is not a problem for libertarianism, and that the form of positive rights endorsed by Maloberti is unfounded, ill-defined, and inconsistent with libertarian notions of individual freedom. It is further argued that Maloberti’s positive rights, as defined in his paper, cannot withstand the analysis prompted by Austrian value theory.

  8. Extending family nursing: concepts from positive psychology.

    Science.gov (United States)

    Skerrett, Karen

    2010-11-01

    This article identifies the burgeoning field of positive psychology as an important extension to the knowledge base of family nursing. Representing a new emphasis from the traditional social and human sciences, which have largely focused on problem- and deficit-based approaches, positive psychology focuses on optimal functioning and is an ideal complement to the strengths-based orientation of family nursing. Domains of positive psychology are presented and exemplars of supporting research offered. Finally, suggestions are given for ways to apply concepts from positive psychology to family nursing practice, research, and education.

  9. Improvised bubble continuous positive airway pressure (BCPAP ...

    African Journals Online (AJOL)

    Improvised bubble continuous positive airway pressure (BCPAP) device at the National Hospital Abuja gives immediate improvement in respiratory rate and oxygenation in neonates with respiratory distress.

  10. Connecting Positive Psychology and Organizational Behavior Management: Achievement Motivation and the Power of Positive Reinforcement

    Science.gov (United States)

    Wiegand, Douglas M.; Geller, E. Scott

    2005-01-01

    Positive psychology is becoming established as a reputable sub-discipline in psychology despite having neglected the role of positive reinforcement in enhancing quality of life. The authors discuss the relevance of positive reinforcement for positive psychology, with implications for broadening the content of organizational behavior management.…

  11. Do lightning positive leaders really "step"?

    Science.gov (United States)

    Petersen, D.

    2015-12-01

    It has been known for some time that positive leaders exhibit impulsive charge motion and optical emissions as they extend. However, laboratory and field observations have not produced any evidence of a process analogous to the space leader mechanism of negative leader extension. Instead, observations have suggested that the positive leader tip undergoes a continuous to intermittent series of corona streamer bursts, each burst resulting in a small forward extension of the positive leader channel. Traditionally, it has been held that lightning positive leaders extend in a continuous or quasi-continuous fashion. Lately, however, many have become concerned that this position is incongruous with observations of impulsive activity during lightning positive leader extension. It is increasingly suggested that this impulsive activity is evidence that positive leaders also undergo "stepping". There are two issues that must be addressed. The first issue concerns whether or not the physical processes underlying impulsive extension in negative and positive leaders are distinct. We argue that these processes are in fact physically distinct, and offer new high-speed video evidence to support this position. The second issue regards the proper use of the term "step" as an identifier for the impulsive forward extension of a leader. Traditional use of this term has been applied only to negative leaders, due primarily to their stronger impulsive charge motions and photographic evidence of clearly discontinuous forward progression of the luminous channel. Recently, due to the increasing understanding of the distinct "space leader" process of negative leader extension, the term "step" has increasingly come to be associated with the space leader process itself. Should this emerging association, "step" = space leader attachment, be canonized? If not, then it seems reasonable to use the term "step" to describe impulsive positive leader extension. If, however, we do wish to associate the

  12. Ventilator-associated pneumonia: role of positioning.

    Science.gov (United States)

    Li Bassi, Gianluigi; Torres, Antoni

    2011-02-01

    Ventilator-associated pneumonia (VAP) is a lung infection commonly acquired following tracheal intubation. This review assesses the role of the supine semirecumbent and the prone position as VAP preventive strategies and calls attention for further investigation on novel body positions that could potentially reduce risks of VAP. The most recent studies on the semirecumbent position failed to achieve an orientation of the head of the bed higher than 30° and did not corroborate any benefit of the semirecumbent position on VAP, as reported in earlier studies. To date, there is clear evidence that the supine horizontal body position increases risks of pulmonary aspiration and VAP, particularly when patients are enterally fed. Laboratory reports are emphasizing the importance of an endotracheal tube-oropharynx-trachea axis below horizontal to avoid VAP. The prone position potentially increases drainage of oropharyngeal and airways secretions and recent evidence is supporting its beneficial effects. However, several associated adverse effects preclude its regular use as a VAP preventive strategy for patients other than those with acute respiratory distress syndrome. Body position greatly affects several pathogenetic mechanisms of VAP. The current evidence recommends avoidance of supine horizontal position in order to prevent aspiration of colonized gastric contents. The semirecumbent position has proven benefits and should be routinely used but there is still limited evidence to recommend the lowest orientation of the bed at which the patient can be safely maintained. Results from pioneering laboratory investigation call attention to new possible positions, that is lateral Trendelenburg position, aimed to avoid pulmonary aspiration and to enhance mucus clearance in intubated patients.

  13. 78 FR 75679 - Position Limits for Derivatives

    Science.gov (United States)

    2013-12-12

    ... practices for compliance with Designated Contract Market (``DCM'') core principle 5 and Swap Execution Facility (``SEF'') core principle 6 in respect of exchange- set speculative position limits and position... To Become Guidance on and Acceptable Practices for Compliance with DCM Core Principle 5 3. The CFTC...

  14. Introduction to Positive Psychology in Rehabilitation

    Science.gov (United States)

    Chou, Chih-Chin; Chan, Fong; Phillips, Brian; Chan, Jacob Yui Chung

    2013-01-01

    Positive psychology has received increasing attention in rehabilitation counseling research and practice. The rehabilitation counseling philosophy shares a similar emphasis of personal assets and strengths, which provides a solid foundation for the integration of positive psychology into the professional practice of rehabilitation counseling. In…

  15. Memory for Chess Positions: Resistance to Interference

    Science.gov (United States)

    Charness, Neil

    1976-01-01

    An information processing model, Memory-Aided Pattern Perceiver (MAPP), that simulates the recall of briefly presented chess positions, was subjected to a test of its assumption that such positions are encoded and stored as chunks in short-term memory. (Editor)

  16. EEG Correlates of Ten Positive Emotions.

    Science.gov (United States)

    Hu, Xin; Yu, Jianwen; Song, Mengdi; Yu, Chun; Wang, Fei; Sun, Pei; Wang, Daifa; Zhang, Dan

    2017-01-01

    Compared with the well documented neurophysiological findings on negative emotions, much less is known about positive emotions. In the present study, we explored the EEG correlates of ten different positive emotions (joy, gratitude, serenity, interest, hope, pride, amusement, inspiration, awe, and love). A group of 20 participants were invited to watch 30 short film clips with their EEGs simultaneously recorded. Distinct topographical patterns for different positive emotions were found for the correlation coefficients between the subjective ratings on the ten positive emotions per film clip and the corresponding EEG spectral powers in different frequency bands. Based on the similarities of the participants' ratings on the ten positive emotions, these emotions were further clustered into three representative clusters, as 'encouragement' for awe, gratitude, hope, inspiration, pride, 'playfulness' for amusement, joy, interest, and 'harmony' for love, serenity. Using the EEG spectral powers as features, both the binary classification on the higher and lower ratings on these positive emotions and the binary classification between the three positive emotion clusters, achieved accuracies of approximately 80% and above. To our knowledge, our study provides the first piece of evidence on the EEG correlates of different positive emotions.

  17. Characteristics of Positive Autobiographical Memories in Adulthood

    Science.gov (United States)

    Bluck, Susan; Alea, Nicole

    2009-01-01

    The characteristics of positive autobiographical memory narratives were examined in younger and older adults. Narratives were content-coded for the extent to which they contained indicators of affect, sensory imagery, and cognition. Affect was additionally assessed through self-report. Young adults expressed more positive affect and less sensory…

  18. Positional reference system for ultraprecision machining

    Science.gov (United States)

    Arnold, J.B.; Burleson, R.R.; Pardue, R.M.

    1980-09-12

    A stable positional reference system for use in improving the cutting tool-to-part contour position in numerical controlled-multiaxis metal turning machines is provided. The reference system employs a plurality of interferometers referenced to orthogonally disposed metering bars which are substantially isolated from machine strain induced position errors for monitoring the part and tool positions relative to the metering bars. A microprocessor-based control system is employed in conjunction with the plurality of positions interferometers and part contour description data input to calculate error components for each axis of movement and output them to corresponding axis driven with appropriate scaling and error compensation. Real-time position control, operating in combination with the reference system, makes possible the positioning of the cutting points of a tool along a part locus with a substantially greater degree of accuracy than has been attained previously in the art by referencing and then monitoring only the tool motion relative to a reference position located on the machine base.

  19. A Positive Stigma for Child Labor?

    Science.gov (United States)

    Patrinos, Harry Anthony; Shafiq, M. Najeeb

    2008-01-01

    We introduce a simple empirical model that assumes a positive stigma (or norm) towards child labor that is common in some developing countries. We then illustrate our positive stigma model using data from Guatemala. Controlling for several child- and household-level characteristics, we use two instruments for measuring stigma: a child's indigenous…

  20. A positive stigma for child labor ?

    OpenAIRE

    Patrinos, Harry Anthony; Shafiq, M. Najeeb

    2008-01-01

    The authors introduce a simple empirical model that assumes a positive stigma (or norm) toward child labor that is common in some developing countries. They illustrate the positive stigma model using data from Guatemala. Controlling for several child and household-level characteristics, the analysis uses two instruments for measuring stigma: a child's indigenous background and the househol...