Use of questioning during lectures in a dental hygiene didactic course.

Science.gov (United States)

Hessheimer, Heather M; Rogo, Ellen J; Howlett, Bernadette

2011-08-01

The purposes of this quasi-experimental, one-group crossover study were to determine the effect of questioning during dental hygiene lectures on low-level and high-level learning and to evaluate student perceptions of questioning. Twenty-three dental hygiene students participated in two control lectures using traditional lecturing methods. The students served as their own controls by next participating in two experimental lectures with questions asked throughout the lecture at both low and high cognitive levels. Student performance was measured with an examination containing low- and high-level questions. The interaction between the group and the level of questions was analyzed using ANOVA, and no statistically significant difference was found. Based on a Likert scale (1 to 6), average ratings for student perceptions were as follows: enjoyment of use, 4.5; understanding the lecture material, 4.74; and questioning effectiveness, 4.35. Student perceptions of questioning were positive; however, this strategy was found to be no more effective than the traditional lecture in promoting retention of information.

Control rod position detector for nuclear reactor

International Nuclear Information System (INIS)

Kudo, Mitsuru; Fujiwara, Hiroshi.

1981-01-01

Purpose: To improve the reliability of a control rod position detector by detecting a reactive code with a combination of control rod position change signals produced from vertical and horizontal axis decoders, generation an error signal and thus simultaneously detecting the operation of more than two lead switches. Constitution: Horizontal and vertical axis position signals responsive to changes in the control rod position are applied from lead switches connected in a predetermined matrix connection corresponding to the notches of the positions of respective position detecting probes, the reactive output from the decoder is detected by a reactive code detecting circuit, which in turn generates a fault signal, and the control rod position code converted in a notch number generating circuit is converted to a predetermined value indicating invalidity. Accordingly, a fault caused by the simultaneous operation of a plurality of failed lead switches can be effectively detected. (Yoshino, Y.)

Quality control in diagnostic immunohistochemistry: integrated on-slide positive controls.

Science.gov (United States)

Bragoni, A; Gambella, A; Pigozzi, S; Grigolini, M; Fiocca, R; Mastracci, L; Grillo, F

2017-11-01

Standardization in immunohistochemistry is a priority in modern pathology and requires strict quality control. Cost containment has also become fundamental and auditing of all procedures must take into account both these principles. Positive controls must be routinely performed so that their positivity guarantees the appropriateness of the immunohistochemical procedure. The aim of this study is to develop a low cost (utilizing a punch biopsy-PB-tool) procedure to construct positive controls which can be integrated in the patient's tissue slide. Sixteen frequently used control blocks were selected and multiple cylindrical samples were obtained using a 5-mm diameter punch biopsy tool, separately re-embedding them in single blocks. For each diagnostic immunoreaction requiring a positive control, an integrated PB-control section (cut from the appropriate PB-control block) was added to the top right corner of the diagnostic slide before immunostaining. This integrated control technique permitted a saving of 4.75% in total direct lab costs and proved to be technically feasible and reliable. Our proposal is easy to perform and within the reach of all pathology labs, requires easily available tools, its application costs is less than using external paired controls and ensures that a specific control for each slide is always available.

Fractional-Order Control of Pneumatic Position Servosystems

OpenAIRE

Junyi, Cao; Binggang, Cao

2011-01-01

A fractional-order control strategy for pneumatic position servosystem is presented in this paper. The idea of the fractional calculus application to control theory was introduced in many works, and its advantages were proved. However, the realization of fractional-order controllers for pneumatic position servosystems has not been investigated. Based on the relationship between the pressure in cylinder and the rate of mass flow into the cylinder, the dynamic model of pneumatic position servo ...

Avaliação do questionário de controle da asma validado para uso no Brasil Evaluation of the asthma control questionnaire validated for use in Brazil

Directory of Open Access Journals (Sweden)

Mylene Leite

2008-10-01

the questionnaire, underwent spirometry and were clinically evaluated by a physician in order to characterize the control of the disease in the first visit. The questionnaire was evaluated in three versions, with 5, 6 and 7 questions, respectively, and scores of 0.75 and 1.50 were used as cut-off points. RESULTS: Of the 278 patients, 77 (27.7% had intermittent asthma, 39 (14.0% had mild persistent asthma, 40 (14.4% had moderate persistent asthma and 122 (43.9% had severe persistent asthma. The sensitivity of ACQ to identify uncontrolled asthma ranged from 77% to 99%, and the specificity ranged from 36% to 84%. The positive predictive value ranged from 73% to 90%, and the negative predictive value ranged from 67% to 95%. The positive likelihood ratio ranged from 1.55 to 4.81, and the negative likelihood ratio ranged from 0.03 to 0.27. In the 5- and 6-question versions of the ACQ, the intraclass correlation coefficient was 0.92. These two versions were both responsive to clinical changes in the patients. CONCLUSIONS: All three versions of the ACQ satisfactorily discriminated between patients with uncontrolled asthma and those with controlled asthma. The 5- and 6-question versions also presented good reliability and responsiveness. Therefore, the ACQ is a valid tool for evaluating asthma control in adult outpatients in Brazil.

A deterministic - approach controller design for electrohydraulic position servo control system

International Nuclear Information System (INIS)

Johari Osman

2000-01-01

This paper is concerned with the design of a tracking controller for controlling electrohydraulic position servo system based on a deterministic approach. The system is treated as an uncertain system with bounded uncertainties where the bounds are assumed known. It will be shown that the electrohydraulic position servo systems with the proposed controller is practically stable and tracks the desired position in spite of the uncertainties and nonlinearities present in the system (author)

Predictive IP controller for robust position control of linear servo system.

Science.gov (United States)

Lu, Shaowu; Zhou, Fengxing; Ma, Yajie; Tang, Xiaoqi

2016-07-01

Position control is a typical application of linear servo system. In this paper, to reduce the system overshoot, an integral plus proportional (IP) controller is used in the position control implementation. To further improve the control performance, a gain-tuning IP controller based on a generalized predictive control (GPC) law is proposed. Firstly, to represent the dynamics of the position loop, a second-order linear model is used and its model parameters are estimated on-line by using a recursive least squares method. Secondly, based on the GPC law, an optimal control sequence is obtained by using receding horizon, then directly supplies the IP controller with the corresponding control parameters in the real operations. Finally, simulation and experimental results are presented to show the efficiency of proposed scheme. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

Position control device for a control rod

International Nuclear Information System (INIS)

Ono, Takehiko; Kusaka, Shuji.

1976-01-01

Purpose: To reliably prevent dangerous operation in the control of the position of the control rod by checking for abnormal pulse motor coil excitation voltage and, at the time of occurrence of abnormality, immediately holding the control rod stationary lest it should be moved to an unsafe position, this being accomplished excitation from a compensating excitation system. Constitution: In an FBR reactor, a circuit for memorizing the correct output states of individual drive signals at arbitrary instants and consequtively producing the memorized results is provided, and the output of the circuit and the actual drive signal are compared at all times to discriminate whether the drive signal being compared is normal or not. When the actual drive signal is abnormal, a series signal varying after a predetermined pattern is shifted to enable replacement of the actual drive signal, so that irrespective of whether the problem drive signal is ''on'' or ''off'', a drive signal of the correct pattern may be supplied to the pulse motor to hold the control rod and prevent it from being moved toward the dangerous side due to its own weight or other causes. (Horiuchi, T.)

High Precision Positioning at Field Camp: Using GNSS as the primary data source to answer geologic questions

Science.gov (United States)

Crosby, B. T.; Lauer, I. H.; Pratt-Sitaula, B.

2017-12-01

Thanks to the availability and accessibility of GPS/GNSS enabled consumer grade positioning devices, GNSS are nearly ubiquitous in both geologic field research and education. Though the devices offer sufficient precision to geotag images, digital field book entries or measurements, positions themselves are not precise enough to accomplish independent geodetic analysis. As a consequence, most students learn about GNSS at a tool that aids other forms of geologic data acquisition rather serving as the primary source itself. To resolve this, we developed and tested a three-unit teaching module within the GETSI - SERC curriculum framework that reinforces high precision positioning as a primary source of geologic data. Units focus on three core topics: GNSS Fundamentals, Kinematic GNSS and Static GNSS Methods. Module goals enable students to (a) design and conduct a GNSS survey to answer a geologic question, (b) justify why their GNSS technique is appropriate to their question and (c) to articulate how answering their question benefits society. Skill building is via quantitative and qualitative analysis, concept sketches, and both field and office based data acquisition and interrogation. Exercises are site-independent and include example datasets for those unable to travel. In the summer of 2017, we tested the module with 20 undergraduate students over two days at the ISU field geology course. Located in the Lost River Range of Idaho, positioned among active normal faults, we not only explored the use of static GNSS data for active tectonics but visited a station in person. For a summative assessment, we focused on kinematic GNSS, using RTK rovers to reoccupy leveling monuments spanning the active Lost River fault that ruptured in 1983 (M 7.0). The data collected by our class quantified aseismic deformation occurring in the 30+ years since that event. Displacements were significantly larger than the instrumental uncertainty, confirming that RTK was an appropriate tool

Upper limb position control in fibromyalgia

Directory of Open Access Journals (Sweden)

Bardal Ellen

2012-09-01

Full Text Available Abstract Background Motor problems are reported by patients with fibromyalgia (FM. However, the mechanisms leading to alterations in motor performance are not well understood. In this study, upper limb position control during sustained isometric contractions was investigated in patients with FM and in healthy controls (HCs. Methods Fifteen female FM patients and 13 HCs were asked to keep a constant upper limb position during sustained elbow flexion and shoulder abduction, respectively. Subjects received real-time visual feedback on limb position and both tasks were performed unloaded and while supporting loads (1, 2, and 3 kg. Accelerations of the dominant upper limb were recorded, with variance (SD of mean position and power spectrum analysis used to characterize limb position control. Normalized power of the acceleration signal was extracted for three frequency bands: 1–3 Hz, 4–7 Hz, and 8–12 Hz. Results Variance increased with load in both tasks (P 0.001 but did not differ significantly between patients and HCs (P > 0.17. Power spectrum analysis showed that the FM patients had a higher proportion of normalized power in the 1–3 Hz band, and a lower proportion of normalized power in the 8–12 Hz band compared to HCs (P 0.05. The results were consistent for all load conditions and for both elbow flexion and shoulder abduction. Conclusion FM patients exhibit an altered neuromuscular strategy for upper limb position control compared to HCs. The predominance of low-frequency limb oscillations among FM patients may indicate a sensory deficit.

Study of intelligent system for control of the tokamak-ETE plasma positioning

International Nuclear Information System (INIS)

Barbosa, Luis Filipe de Faria Pereira Wiltgen

2003-01-01

The development of an intelligent neural control system of the neural type, capable to perform real time control of the plasma displacement in the experiment tokamak spheric - ETE (spherical tokamak experiment ) is presented. The ETE machine is in operation since Nov 2000, in the LAP - Plasma Associated Laboratory of the Brazilian Institute on Spatial Research (INPE) in Sao Jose dos Campos, S P, Brazil. The experiment is dedicated to study the magnetic confinement of a fusion plasma in a configuration favorable for the construction of future reactors. Nuclear fusion constitutes a renewable energy source with low environmental impact, which uses atomic energy in pacific applications for the sustainable development of humanity. One of the important questions for the attainment of fusion relates to the stability of the plasma and control of its position during the reactor operation. Therefore, the development of systems to control the plasma in tokamaks constitutes a necessary technological advance for the feasibility of nuclear fusion. In particular, the research carried out in this thesis concerns the proposal of a system to control the vertical displacement of the plasma in the ETE tokamak, aiming to obtain steady pulses in this machine. A Magnetic Levitation system (Mag Lev) was developed as part of this work, allowing to study the nonlinear behavior of a device that, from the aspect of position control, is similar (analogous) to the plasma in the ETE tokamak, This magnetic levitation system was designed, mathematically modeled and built in order to test both classical and intelligent type controllers. The results of this comparison are very promising for the use of intelligent controllers in the ETE tokamak as well as other control applications. (author)

Anticipatory planning and control of grasp positions and forces for dexterous two-digit manipulation.

Science.gov (United States)

Fu, Qiushi; Zhang, Wei; Santello, Marco

2010-07-07

Dexterous object manipulation requires anticipatory control of digit positions and forces. Despite extensive studies on sensorimotor learning of digit forces, how humans learn to coordinate digit positions and forces has never been addressed. Furthermore, the functional role of anticipatory modulation of digit placement to object properties remains to be investigated. We addressed these questions by asking human subjects (12 females, 12 males) to grasp and lift an inverted T-shaped object using precision grip at constrained or self-chosen locations. The task requirement was to minimize object roll during lift. When digit position was not constrained, subjects could have implemented many equally valid digit position-force coordination patterns. However, choice of digit placement might also have resulted in large trial-to-trial variability of digit position, hence challenging the extent to which the CNS could have relied on sensorimotor memories for anticipatory control of digit forces. We hypothesized that subjects would modulate digit placement for optimal force distribution and digit forces as a function of variable digit positions. All subjects learned to minimize object roll within the first three trials, and the unconstrained device was associated with significantly smaller grip forces but larger variability of digit positions. Importantly, however, digit load force modulation compensated for position variability, thus ensuring consistent object roll minimization on each trial. This indicates that subjects learned object manipulation by integrating sensorimotor memories with sensory feedback about digit positions. These results are discussed in the context of motor equivalence and sensorimotor integration of grasp kinematics and kinetics.

Cylinder Position Servo Control Based on Fuzzy PID

Directory of Open Access Journals (Sweden)

Shibo Cai

2013-01-01

Full Text Available The arbitrary position control of cylinder has always been the hard challenge in pneumatic system. We try to develop a cylinder position servo control method by combining fuzzy PID with the theoretical model of the proportional valve-controlled cylinder system. The pressure differential equation of cylinder, pressure-flow equation of proportional valve, and moment equilibrium equation of cylinder are established. And the mathematical models of the cylinder driving system are linearized. Then fuzzy PID control algorithm is designed for the cylinder position control, including the detail analysis of fuzzy variables and domain, fuzzy logic rules, and defuzzification. The stability of the proposed fuzzy PID controller is theoretically proved according to the small gain theorem. Experiments for targets position of 250 mm, 300 mm, and 350 mm were done and the results showed that the absolute error of the position control is less than 0.25 mm. And comparative experiment between fuzzy PID and classical PID verified the advantage of the proposed algorithm.

Plasma position control in TCABR Tokamak

International Nuclear Information System (INIS)

Galvao, R.M.O.; Kuznetsov, Yu. K.; Nascimento, I.C.; Fonseca, A.M.M.; Silva, R.P. da; Ruchko, L.F.; Tuszel, A.G.; Reis, A.P. dos; Sanada, E.K.

1998-01-01

The plasma control position in the TCABR tokamak is described. The TCA tokamak was transferred from the Centre de Recherches en Physique des Plasmas, Lausanne, to the Institute of Physics of University of Sao Paulo, renamed TCABR (α=0.18 m, R = 0.62 m, B = 1 T,I p = 100 kA). The control system was reconstructed using mainly components obtained from the TCA tokamak. A new method of plasma position determination is used in TCABR to improve its accuracy. A more detailed theoretical analysis of the feed forward and feedback control is performed as compared with. (author)

Tungsten carbide-cobalt as a nanoparticulate reference positive control in in vitro genotoxicity assays.

Science.gov (United States)

Moche, Hélène; Chevalier, Dany; Barois, Nicolas; Lorge, Elisabeth; Claude, Nancy; Nesslany, Fabrice

2014-01-01

With the increasing human exposure to nanoparticles (NP), the evaluation of their genotoxic potential is of significant importance. However, relevance for NP of the routinely used in vitro genotoxicity assays is often questioned, and a nanoparticulate reference positive control would therefore constitute an important step to a better testing of NP, ensuring that test systems are really appropriate. In this study, we investigated the possibility of using tungsten carbide-cobalt (WC-Co) NP as reference positive control in in vitro genotoxicity assays, including 2 regulatory assays, the mouse lymphoma assay and the micronucleus assay, and in the Comet assay, recommended for the toxicological evaluation of nanomedicines by the French Agency of Human Health Products (Afssaps). Through these assays, we were able to study different genetic endpoints in 2 cell types commonly used in regulatory genotoxicity assays: the L5178Y mouse lymphoma cell line and primary cultures of human lymphocytes. Our results showed that the use of WC-Co NP as positive control in in vitro genotoxicity assays was conceivable, but that different parameters have to be considered, such as cell type and treatment schedule. L5178Y mouse lymphoma cells did not provide satisfactory results in the 3 performed tests. However, human lymphocytes were more sensitive to genotoxic effects induced by WC-Co NP, particularly after a 24-h treatment in the in vitro micronucleus assay and after a 4-h treatment in the in vitro Comet assay. Under such conditions, WC-Co could be used as a nanoparticulate reference positive control in these assays.

Robust Position Control of Electro-mechanical Systems

OpenAIRE

Rong Mei; Mou Chen

2013-01-01

In this work, the robust position control scheme is proposed for the electro-mechanical system using the disturbance observer and backstepping control method. To the external unknown load of the electro-mechanical system, the nonlinear disturbance observer is given to estimate the external unknown load. Combining the output of the developed nonlinear disturbance observer with backstepping technology, the robust position control scheme is proposed for the electro-mechanical system. The stabili...

A fast position estimation method for a control rod guide tube inspection robot with a single camera

International Nuclear Information System (INIS)

Lee, Jae C.; Seop, Jun H.; Choi, Yu R.; Kim, Jae H.

2004-01-01

One of the problems in the inspection of control rod guide tubes using a mobile robot is accurate estimation of the robot's position. The problem is usually explained by the question 'Where am I?'. We can solve this question by a method called dead reckoning using odometers. But it has some inherent drawbacks such that the position error grows without bound unless an independent reference is used periodically to reduce the errors. In this paper, we presented one method to overcome this drawback by using a vision sensor. Our method is based on the classical Lucas Kanade algorithm for on image tracking. In this algorithm, an optical flow must be calculated at every image frame, thus it has intensive computing load. In order to handle large motions, it is preferable to use a large integration window. But a small integration window is more preferable to keep the details contained in the images. We used the robot's movement information obtained from the dead reckoning as an input parameter for the feature tracking algorithm in order to restrict the position of an integration window. By means of this method, we could reduce the size of an integration window without any loss of its ability to handle large motions and could avoid the trade off in the accuracy. And we could estimate the position of our robot relatively fast without on intensive computing time and the inherent drawbacks mentioned above. We studied this algorithm for applying it to the control rod guide tubes inspection robot and tried an inspection without on operator's intervention

Emotional modulation of control dilemmas: the role of positive affect, reward, and dopamine in cognitive stability and flexibility.

Science.gov (United States)

Goschke, Thomas; Bolte, Annette

2014-09-01

Goal-directed action in changing environments requires a dynamic balance between complementary control modes, which serve antagonistic adaptive functions (e.g., to shield goals from competing responses and distracting information vs. to flexibly switch between goals and behavioral dispositions in response to significant changes). Too rigid goal shielding promotes stability but incurs a cost in terms of perseveration and reduced flexibility, whereas too weak goal shielding promotes flexibility but incurs a cost in terms of increased distractibility. While research on cognitive control has long been conducted relatively independently from the study of emotion and motivation, it is becoming increasingly clear that positive affect and reward play a central role in modulating cognitive control. In particular, evidence from the past decade suggests that positive affect not only influences the contents of cognitive processes, but also modulates the balance between complementary modes of cognitive control. In this article we review studies from the past decade that examined effects of induced positive affect on the balance between cognitive stability and flexibility with a focus on set switching and working memory maintenance and updating. Moreover, we review recent evidence indicating that task-irrelevant positive affect and performance-contingent rewards exert different and sometimes opposite effects on cognitive control modes, suggesting dissociations between emotional and motivational effects of positive affect. Finally, we critically review evidence for the popular hypothesis that effects of positive affect may be mediated by dopaminergic modulations of neural processing in prefrontal and striatal brain circuits, and we refine this "dopamine hypothesis of positive affect" by specifying distinct mechanisms by which dopamine may mediate effects of positive affect and reward on cognitive control. We conclude with a discussion of limitations of current research, point to

Robust control design for the plasma horizontal position control on J-TEXT Tokamak

International Nuclear Information System (INIS)

Yu, W.Z.; Chen, Z.P.; Zhuang, G.; Wang, Z.J.

2013-01-01

It is extremely important for tokamak to control the plasma position during routine discharge. However, the model of plasma in tokamak usually contains much of the uncertainty, such as structured uncertainties and unmodeled dynamics. Compared with the traditional PID control approach, robust control theory is more suitable to handle this problem. In the paper, we propose a H ∞ robust control scheme to control the horizontal position of plasma during the flat-top phase of discharge on Joint Texas Experimental Tokamak (J-TEXT) tokamak. First, the model of our plant for plasma horizontal position control is obtained from the position equilibrium equations. Then the H ∞ robust control framework is used to synthesize the controller. Based on this, an H ∞ controller is designed to minimize the regulation/tracking error. Finally, a comparison study is conducted between the optimized H ∞ robust controller and the traditional PID controller in simulations. The simulation results of the H ∞ robust controller show a significant improvement of the performance with respect to those obtained with traditional PID controller, which is currently used on our machine

Consensus positive position feedback control for vibration attenuation of smart structures

Science.gov (United States)

Omidi, Ehsan; Nima Mahmoodi, S.

2015-04-01

This paper presents a new network-based approach for active vibration control in smart structures. In this approach, a network with known topology connects collocated actuator/sensor elements of the smart structure to one another. Each of these actuators/sensors, i.e., agent or node, is enhanced by a separate multi-mode positive position feedback (PPF) controller. The decentralized PPF controlled agents collaborate with each other in the designed network, under a certain consensus dynamics. The consensus constraint forces neighboring agents to cooperate with each other such that the disagreement between the time-domain actuation of the agents is driven to zero. The controller output of each agent is calculated using state-space variables; hence, optimal state estimators are designed first for the proposed observer-based consensus PPF control. The consensus controller is numerically investigated for a flexible smart structure, i.e., a thin aluminum beam that is clamped at its both ends. Results demonstrate that the consensus law successfully imposes synchronization between the independently controlled agents, as the disagreements between the decentralized PPF controller variables converge to zero in a short time. The new consensus PPF controller brings extra robustness to vibration suppression in smart structures, where malfunctions of an agent can be compensated for by referencing the neighboring agents’ performance. This is demonstrated in the results by comparing the new controller with former centralized PPF approach.

Anti-Windup Scheme for Practical Control of Positioning Systems

Directory of Open Access Journals (Sweden)

Wahyudi Tarig Faisal and Abdulgani Albagul

2012-10-01

Full Text Available Positioning systems generally need a good controller to achieve high accuracy, fast response and robustness. In addition, ease of controller design and simplicity of controller structure are very important for practical application.  For satisfying these requirements, nominal characteristic trajectory following controller (NCTF has been proposed as a practical point-to-point (PTP positioning control. However, the effect of actuator saturation can not be completely compensated for due to the integrator windup as the plant parameters vary. This paper presents a method to improve the NCTF controller for overcoming the problem of integrator windup using simple and classical tracking anti-windup scheme. The improved NCTF controller is evaluated through simulation using a rotary positioning system. The results show that the improved NCTF controller is adequate to compensate for the effect of integrator windup. Keywords: Positioning, point-to-point, integrator windup, compensation, controller, robustness.

Control of plasma position in the CASTOR tokamak

International Nuclear Information System (INIS)

Valovic, M.

1988-11-01

A simple servo-system designed for plasma position control in the CASTOR tokamak is described. Both radial and vertical plasma displacements were minimized using two servo-loops consisting of detection coils, a conventional electric controller and an amplifier operated as an unipolar voltage-controlled current source. To ensure the optimum conditions in the start-up phase of the discharge, currents in the servo-systems were externally preprogrammed. The prescribed plasma position was maintained with the accuracy of 3 mm. The feedback control improves plasma parameters, e.g. it removes the positional disruption at the end of the tokamak discharge. (J.U.). 4 figs., 3 refs

Robust hydraulic position controller by a fuzzy state controller

International Nuclear Information System (INIS)

Zhao, T.; Van der Wal, A.J.

1994-01-01

In nuclear industry, one of the most important design considerations of controllers is their robustness. Robustness in this context is defined as the ability of a system to be controlled in a stable way over a wide range of system parameters. Generally the systems to be controlled are linearized, and stability is subsequently proven for this idealized system. By combining classical control theory and fuzzy set theory, a new kind of state controller is proposed and successfully applied to a hydraulic position servo with excellent robustness against variation of system parameters

Sensorless SPMSM Position Estimation Using Position Estimation Error Suppression Control and EKF in Wide Speed Range

Directory of Open Access Journals (Sweden)

Zhanshan Wang

2014-01-01

Full Text Available The control of a high performance alternative current (AC motor drive under sensorless operation needs the accurate estimation of rotor position. In this paper, one method of accurately estimating rotor position by using both motor complex number model based position estimation and position estimation error suppression proportion integral (PI controller is proposed for the sensorless control of the surface permanent magnet synchronous motor (SPMSM. In order to guarantee the accuracy of rotor position estimation in the flux-weakening region, one scheme of identifying the permanent magnet flux of SPMSM by extended Kalman filter (EKF is also proposed, which formed the effective combination method to realize the sensorless control of SPMSM with high accuracy. The simulation results demonstrated the validity and feasibility of the proposed position/speed estimation system.

Real-time horizontal position control for Aditya-upgrade tokamak

International Nuclear Information System (INIS)

Kumar, Rohit; Ghosh, Joydeep; Tanna, Rakesh L.

2015-01-01

Position of plasma column is required to be controlled in real time for improved operation of any tokamak. A PID based system for real-time horizontal plasma position control has been designed for Aditya Upgrade tokamak. Modelling of transfer functions of actuators, plasma and diagnostic system are carried out for ADITYA-U tokamak. The PID controller is optimized using MATLAB-SIMULINK for horizontal position control. Further feed-forward loop is implemented where disturbance due to density variation is suppressed, which results in improved performance as compared to conventional PID operation. In this paper the detailed design of the whole system for real time control of plasma horizontal position in Aditya Upgrade tokamak is presented. (author)

Positive sliding mode control for blood glucose regulation

Science.gov (United States)

Menani, Karima; Mohammadridha, Taghreed; Magdelaine, Nicolas; Abdelaziz, Mourad; Moog, Claude H.

2017-11-01

Biological systems involving positive variables as concentrations are some examples of so-called positive systems. This is the case of the glycemia-insulinemia system considered in this paper. To cope with these physical constraints, it is shown that a positive sliding mode control (SMC) can be designed for glycemia regulation. The largest positive invariant set (PIS) is obtained for the insulinemia subsystem in open and closed loop. The existence of a positive SMC for glycemia regulation is shown here for the first time. Necessary conditions to design the sliding surface and the discontinuity gain are derived to guarantee a positive SMC for the insulin dynamics. SMC is designed to be positive everywhere in the largest closed-loop PIS of plasma insulin system. Two-stage SMC is employed; the last stage SMC2 block uses the glycemia error to design the desired insulin trajectory. Then the plasma insulin state is forced to track the reference via SMC1. The resulting desired insulin trajectory is the required virtual control input of the glycemia system to eliminate blood glucose (BG) error. The positive control is tested in silico on type-1 diabetic patients model derived from real-life clinical data.

Nano positioning control for dual stage using minimum order observer

International Nuclear Information System (INIS)

Kim, Hong Gun

2012-01-01

A nano positioning control is developed using the ultra-precision positioning apparatus such as actuator, sensor, guide, power transmission element with an appropriate control method. Using established procedures, a single plane X-Y stage with ultra-precision positioning is manufactured. A global stage for materialization with robust system is combined by using an AC servo motor with a ball screw and rolling guide. An ultra-precision positioning system is developed using a micro stage with an elastic hinge and piezo element. Global and micro servos for positioning with nanometer accuracy are controlled simultaneously using an incremental encoder and a laser interferometer to measure displacement. Using established procedures, an ultra-precision positioning system (100 mm stroke and ±10 nm positioning accuracy) with a single plane X-Y stage is fabricated. Its performance is evaluated through simulation using Matlab. After analyzing previous control algorithms and adapting modern control theory, a dual servo algorithm is developed for a minimum order observer to secure the stability and priority on the controller. The simulations and experiments on the ultra precision positioning and the stability of the ultra-precision positioning system with single plane X-Y stage and the priority of the control algorithm are secured by using Matlab with Simulink and ControlDesk made in dSPACE

Nano positioning control for dual stage using minimum order observer

Energy Technology Data Exchange (ETDEWEB)

Kim, Hong Gun [Jeonju University, Jeonju (Korea, Republic of)

2012-03-15

A nano positioning control is developed using the ultra-precision positioning apparatus such as actuator, sensor, guide, power transmission element with an appropriate control method. Using established procedures, a single plane X-Y stage with ultra-precision positioning is manufactured. A global stage for materialization with robust system is combined by using an AC servo motor with a ball screw and rolling guide. An ultra-precision positioning system is developed using a micro stage with an elastic hinge and piezo element. Global and micro servos for positioning with nanometer accuracy are controlled simultaneously using an incremental encoder and a laser interferometer to measure displacement. Using established procedures, an ultra-precision positioning system (100 mm stroke and {+-}10 nm positioning accuracy) with a single plane X-Y stage is fabricated. Its performance is evaluated through simulation using Matlab. After analyzing previous control algorithms and adapting modern control theory, a dual servo algorithm is developed for a minimum order observer to secure the stability and priority on the controller. The simulations and experiments on the ultra precision positioning and the stability of the ultra-precision positioning system with single plane X-Y stage and the priority of the control algorithm are secured by using Matlab with Simulink and ControlDesk made in dSPACE.

Optimising position control of a solar parabolic trough

Directory of Open Access Journals (Sweden)

Puramanathan Naidoo

2011-03-01

Full Text Available In today’s climate of growing energy needs and increasing environmental concerns, alternatives to the use of non-renewable and polluting fossil fuels have to be investigated. One such alternative is solar energy. This study is based on the implementation of a mathematical computation – the PSA (Plataforma Solar de Almeria computation developed at PSA (the European Test Centre for solar energy applications – embedded in a control algorithm to locate the position of the sun. Tests were conducted on a solar parabolic trough (SPT constructed at the Solar Thermal Applications Research Laboratory of the Mangosuthu University of Technology (Durban, South Africa for optimal position control using the PSA value. The designed control algorithm embedded in an industrial Siemens S7-314 C-2PtP programmable logic controller compared the PSA computation to a measured position of the SPT to optimally rotate the SPT to a desired position with the constant movement of the sun. The two main angles of the sun relative to the position of the SPT on earth, the zenith angle and the azimuth angle, both calculated in the PSA from the vertical and horizontal planes, respectively, were applied to the control algorithm to generate an appropriate final tracking angle within a 0.007 radian (0° 24′ 3.6″ tolerance, in accordance to the construction specifications and solar collector testing standards of the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE, 1991. These values, together with the longitude and latitude applicable to the geographical location of the SPT, were processed in the control software to rotate the SPT to an optimal position with respect to the position of the sun in its daily path, for solar-to-thermal conversion.

Motivation enhances control of positive and negative emotional distractions.

Science.gov (United States)

Walsh, Amy T; Carmel, David; Harper, David; Grimshaw, Gina M

2018-01-03

Using cognitive control to ignore distractions is essential for successfully achieving our goals. In emotionally-neutral contexts, motivation can reduce interference from irrelevant stimuli by enhancing cognitive control. However, attention is commonly biased towards emotional stimuli, making them potent distractors. Can motivation aid control of emotional distractions, and does it do so similarly for positive and negative stimuli? Here, we examined how task motivation influences control of distraction from positive, negative, and neutral scenes. Participants completed a simple perceptual task while attempting to ignore task-irrelevant images. One group received monetary reward for fast and accurate task performance; another (control) group did not. Overall, both negative (mutilation) and positive (erotic) images caused greater slowing of responses than neutral images of people, but emotional distraction was reduced with reward. Crucially, despite the different motivational directions associated with negative and positive stimuli, reward reduced negative and positive distraction equally. Our findings suggest that motivation may encourage the use of a sustained proactive control strategy that can effectively reduce the impact of emotional distraction.

Control system design for nano-positioning using piezoelectric actuators

International Nuclear Information System (INIS)

Shan, Jinjun; Liu, Yanfang; Cui, Naigang; Gabbert, Ulrich

2016-01-01

This paper presents a systematic control system design for nano-positioning of a piezoelectric actuator (PEA). PEAs exhibit hysteresis nonlinearity, which can dramatically limit the application and performance of linear feedback control theory. Thus the hysteresis is compensated for based on the Maxwell resistive capacitor (MRC) model first. Then a proportional plus integral (PI) controller and a proportional double integral plus lead compensation (PII and L) controller are designed for the hysteresis-compensated PEA to account for model uncertainty, disturbance, and noise. The robust stability of both controllers is proved. The effectiveness of the proposed control scheme is demonstrated experimentally. Both controllers achieve fast precise positioning. The 2% settling times for the PI controller and the PII and L controller are 1.5 ms and 4.7 ms, respectively. The positioning resolution is upto 1 nm for both controllers. (paper)

Tracking control mechanisms for positioning automatic CRD exchanger

International Nuclear Information System (INIS)

Koizumi, Akira; Takada, Satoshi.

1984-01-01

Purpose: To enable completely automatic positioning for the automatic CRD (control rod drives) exchanger, as well as shorten the time for the exchanging operation and save the operator's labour. Constitution: Images of a target attached to the lower flange face of CRD are picked up by a fiber scope mounted to a mounting head. The images are converted through I.T.V. into electrical signals, passed through a cable and then sent to a pattern recognition mechanism. The position for the images of the target is calculated and the calculated position is sent to a drive control section, where the position for the images of the target is compared with a reference position for the images (exactly aligned position) and the moving amount of the mounting head is calculated to move the driving section and thereby complete the positioning. (Kawakami, Y.)

Plasma position control device for thermonuclear device

Energy Technology Data Exchange (ETDEWEB)

Onozuka, Masanori [Mitsubishi Heavy Industries Ltd., Tokyo (Japan); Fujita, Jun-ya; Ioki, Kimihiro

1995-10-03

The present invention concerns plasma position control coils having a feeder line structure not requiring high strength for the support portion. Namely, the coils are formed by twisting feeder lines extended from plasma position control coils in a vacuum vessel. The twisted feeder lines are supported using an appropriate structural member. Electromagnetic load is generated to the feeder lines being extended from the position control coils and traversing toroidal fields at a current introduction lines and at current delivery lines respectively. However, since the feeder lines have substantially spiral shape consisting of two twisted lines, the electromagnetic load and the moment caused by the generated load which are inversed to each other are off set. Accordingly, only extremely small force is exerted on the fittings which support the feeder lines. Therefore, small strength may suffice for the fittings and the gaps of mounting the fittings may be made longer. (I.S.).

Plasma position control device for thermonuclear device

International Nuclear Information System (INIS)

Onozuka, Masanori; Fujita, Jun-ya; Ioki, Kimihiro.

1995-01-01

The present invention concerns plasma position control coils having a feeder line structure not requiring high strength for the support portion. Namely, the coils are formed by twisting feeder lines extended from plasma position control coils in a vacuum vessel. The twisted feeder lines are supported using an appropriate structural member. Electromagnetic load is generated to the feeder lines being extended from the position control coils and traversing toroidal fields at a current introduction lines and at current delivery lines respectively. However, since the feeder lines have substantially spiral shape consisting of two twisted lines, the electromagnetic load and the moment caused by the generated load which are inversed to each other are off set. Accordingly, only extremely small force is exerted on the fittings which support the feeder lines. Therefore, small strength may suffice for the fittings and the gaps of mounting the fittings may be made longer. (I.S.)

Impulse position control algorithms for nonlinear systems

Energy Technology Data Exchange (ETDEWEB)

Sesekin, A. N., E-mail: sesekin@list.ru [Ural Federal University, 19 S. Mira, Ekaterinburg, 620002 (Russian Federation); Institute of Mathematics and Mechanics, Ural Division of Russian Academy of Sciences, 16 S. Kovalevskaya, Ekaterinburg, 620990 (Russian Federation); Nepp, A. N., E-mail: anepp@urfu.ru [Ural Federal University, 19 S. Mira, Ekaterinburg, 620002 (Russian Federation)

2015-11-30

The article is devoted to the formalization and description of impulse-sliding regime in nonlinear dynamical systems that arise in the application of impulse position controls of a special kind. The concept of trajectory impulse-sliding regime formalized as some limiting network element Euler polygons generated by a discrete approximation of the impulse position control This paper differs from the previously published papers in that it uses a definition of solutions of systems with impulse controls, it based on the closure of the set of smooth solutions in the space of functions of bounded variation. The need for the study of such regimes is the fact that they often arise when parry disturbances acting on technical or economic control system.

Impulse position control algorithms for nonlinear systems

Science.gov (United States)

Sesekin, A. N.; Nepp, A. N.

2015-11-01

The article is devoted to the formalization and description of impulse-sliding regime in nonlinear dynamical systems that arise in the application of impulse position controls of a special kind. The concept of trajectory impulse-sliding regime formalized as some limiting network element Euler polygons generated by a discrete approximation of the impulse position control This paper differs from the previously published papers in that it uses a definition of solutions of systems with impulse controls, it based on the closure of the set of smooth solutions in the space of functions of bounded variation. The need for the study of such regimes is the fact that they often arise when parry disturbances acting on technical or economic control system.

Optogenetic control of organelle transport and positioning

NARCIS (Netherlands)

van Bergeijk, Petra; Adrian, Max; Hoogenraad, Casper C; Kapitein, Lukas C

2015-01-01

Proper positioning of organelles by cytoskeleton-based motor proteins underlies cellular events such as signalling, polarization and growth. For many organelles, however, the precise connection between position and function has remained unclear, because strategies to control intracellular organelle

Car-Like Mobile Robot Oriented Positioning by Fuzzy Controllers

Directory of Open Access Journals (Sweden)

Noureddine Ouadah

2008-11-01

Full Text Available In this paper, fuzzy logic controllers (FLC are used to implement an efficient and accurate positioning of an autonomous car-like mobile robot, respecting final orientation. To accomplish this task, called "Oriented Positioning", two FLC have been developed: robot positioning controller (RPC and robot following controller (RFC. Computer simulation results illustrate the effectiveness of the proposed technique. Finally, real-time experiments have been made on an autonomous car-like mobile robot called "Robucar", developed to perform people transportation. Obtained results from experiments demonstrate the effectiveness of the proposed control strategy.

The Effects of Embedded Question Type and Locus of Control on Processing Depth, Knowledge Gain, and Attitude Change in a Computer-Based Interactive Video Environment

OpenAIRE

Mitchell, Michael W.

1997-01-01

The differential effectiveness of two types of adjunct embedded questions in facilitating deep processing, increased knowledge gain, and increased positive attitude change was examined in this two-session laboratory study. In session one, subjects completed a measure of locus of control (LOC) orientation, as well as measures of pretest knowledge and attitudes regarding drinking. Two weeks later, stratified assignment was used to place 33 subjects (ages 12 to 15...

Development of the 'JFT-2' tokamak plasma position control system

International Nuclear Information System (INIS)

Fujisawa, Noboru; Matsuzaki, Yoshimi; Suzuki, Norio; Murai, Katsuji; Suzuki, Satoshi.

1980-01-01

Digital control technique was applied to control the plasma position in the JFT-2 tokamak experiment device. The detail of the JFT-2 is described elsewhere. The plasma position control system consists of a Hitachi control computer, HIDIC 80, and a Hitachi micro-computer, HIDIC 08E. The plasma position is detected by the position control computer, and compared with a preset value. Then, a reference signal is supplied to the micro-computer controlling power source, and the phase control of the thyristor controlling power source is performed. Since the behavior of plasma is very fast, the fast control is required. The control of the thyristor controlling power source is made by direct digital control (DDC). The main component of the hardware of the present system is the micro-computer HIDIC 08E. The software is the direct task system without the operating system (OS). The results of experiments showed that the feedback control of the system worked well. (Kato, T.)

An information theory account of late frontoparietal ERP positivities in cognitive control.

Science.gov (United States)

Barceló, Francisco; Cooper, Patrick S

2018-03-01

ERP research on task switching has revealed distinct transient and sustained positive waveforms (latency circa 300-900 ms) while shifting task rules or stimulus-response (S-R) mappings. However, it remains unclear whether such switch-related positivities show similar scalp topography and index context-updating mechanisms akin to those posed for domain-general (i.e., classic P300) positivities in many task domains. To examine this question, ERPs were recorded from 31 young adults (18-30 years) while they were intermittently cued to switch or repeat their perceptual categorization of Gabor gratings varying in color and thickness (switch task), or else they performed two visually identical control tasks (go/no-go and oddball). Our task cueing paradigm examined two temporarily distinct stages of proactive rule updating and reactive rule execution. A simple information theory model helped us gauge cognitive demands under distinct temporal and task contexts in terms of low-level S-R pathways and higher-order rule updating operations. Task demands modulated domain-general (indexed by classic oddball P3) and switch positivities-indexed by both a cue-locked late positive complex and a sustained positivity ensuing task transitions. Topographic scalp analyses confirmed subtle yet significant split-second changes in the configuration of neural sources for both domain-general P3s and switch positivities as a function of both the temporal and task context. These findings partly meet predictions from information estimates, and are compatible with a family of P3-like potentials indexing functionally distinct neural operations within a common frontoparietal "multiple demand" system during the preparation and execution of simple task rules. © 2016 Society for Psychophysiological Research.

Advanced control of piezoelectric micro-nano-positioning systems

CERN Document Server

Xu, Qingsong

2016-01-01

This book explores emerging methods and algorithms that enable precise control of micro-/nano-positioning systems. The text describes three control strategies: hysteresis-model-based feedforward control and hysteresis-model-free feedback control based on and free from state observation. Each paradigm receives dedicated attention within a particular part of the text. Readers are shown how to design, validate and apply a variety of new control approaches in micromanipulation: hysteresis modelling, discrete-time sliding-mode control and model-reference adaptive control. Experimental results are provided throughout and build up to a detailed treatment of practical applications in the fourth part of the book. The applications focus on control of piezoelectric grippers. Advanced Control of Piezoelectric Micro-/Nano-Positioning Systems will assist academic researchers and practising control and mechatronics engineers interested in suppressing sources of nonlinearity such as hysteresis and drift when combining positi...

Coordinated joint motion control system with position error correction

Science.gov (United States)

Danko, George L.

2016-04-05

Disclosed are an articulated hydraulic machine supporting, control system and control method for same. The articulated hydraulic machine has an end effector for performing useful work. The control system is capable of controlling the end effector for automated movement along a preselected trajectory. The control system has a position error correction system to correct discrepancies between an actual end effector trajectory and a desired end effector trajectory. The correction system can employ one or more absolute position signals provided by one or more acceleration sensors supported by one or more movable machine elements. Good trajectory positioning and repeatability can be obtained. A two joystick controller system is enabled, which can in some cases facilitate the operator's task and enhance their work quality and productivity.

Automation of Aditya tokamak plasma position control DC power supply

Energy Technology Data Exchange (ETDEWEB)

Arambhadiya, Bharat, E-mail: bharat@ipr.res.in; Raj, Harshita; Tanna, R.L.; Edappala, Praveenlal; Rajpal, Rachana; Ghosh, Joydeep; Chattopadhyay, P.K.; Kalal, M.B.

2016-11-15

Highlights: • Plasma position control is very essential for obtaining repeatable high temperature, high-density discharges of longer durations in tokomak. • The present capacitor bank has limitations of maximum current capacity and position control beyond 200 ms. • The installation of a separate set of coils and a DC power supply can control the plasma position beyond 200 ms. • A high power thyristor (T588N1200) triggers for DC current pulse of 300 A fires precisely at required positions to modify plasma position. • The commissioning is done for the automated in-house, quick and reliable solution. - Abstract: Plasma position control is essential for obtaining repeatable high temperature, high-density discharges of longer duration in tokamaks. Recently, a set of external coils is installed in the vertical field mode configuration to control the radial plasma position in ADITYA tokamak. The existing capacitor bank cannot provide the required current pulse beyond 200 ms for position control. This motivated to have a DC power supply of 500 A to provide current pulse beyond 200 ms for the position control. The automatization of the DC power supply mandated interfaces with the plasma control system, Aditya Pulse Power supply, and Data acquisition system for coordinated discharge operation. A high current thyristor circuit and a timer circuit have been developed for controlling the power supply automatically for charging vertical field coils of Aditya tokamak. Key protection interlocks implemented in the development ensure machine and occupational safety. Fiber-optic trans-receiver isolates the power supply with other subsystems, while analog channel is optically isolated. Commissioning and testing established proper synchronization of the power supply with tokamak operation. The paper discusses the automation of the DC power supply with main circuit components, timing control, and testing results.

Self-tuning control studies of the plasma vertical position problem

International Nuclear Information System (INIS)

Zheng, Guang Lin; Wellstead, P.E.; Browne, M.L.

1993-01-01

The plasma vertical position system in a tokamak device can be open-loop unstable with time-varying dynamics, such that the instability increases with system dynamical changes. Time-varying unstable dynamics makes the plasma vertical position a particularly difficult one to control with traditional fixed-coefficient controllers. A self-tuning technique offers a new solution of the plasma vertical position control problem by an adaptive control approach. Specifically, the self-tuning controller automatically tunes the controller parameters without an a priori knowledge of the system dynamics and continuously tracks dynamical changes within the system, thereby providing the system with auto-tuning and adaptive tuning capabilities. An overview of the self-tuning methods is given, and their applicability to a simulation of the Joint European Torus (JET) vertical plasma positions system is illustrated. Specifically, the applicability of pole-assignment and generalized predictive control self-tuning methods to the vertical plasma position system is demonstrated. 26 refs., 16 figs., 1 tab

Digital control of plasma position in Damavand tokamak

Energy Technology Data Exchange (ETDEWEB)

Emami, M.; Babazadeh, A.R.; Roshan, M.V.; Memarzadeh, M.; Habibi, H. [Atomic Energy Organization of Iran (AEOI), Tehran (Iran, Islamic Republic of). Nuclear Fusion Research Center. Plasma Physics Lab.

2002-03-01

Plasma position control is one of the important issues in the design and operation of tokamak fusion research device. Since a tokamak is basically an electrical system consisting of power supplies, coils, plasma and eddy currents, a model in which these components are treated as an electrical circuits is used in designing Damavand plasma position control system. This model is used for the simulation of the digital control system and its parameters have been verified experimentally. In this paper, the performance of a high-speed digital controller as well as a simulation study and its application to the Damavand tokamak is discussed. (author)

Positive affect improves working memory: implications for controlled cognitive processing.

Science.gov (United States)

Yang, Hwajin; Yang, Sujin; Isen, Alice M

2013-01-01

This study examined the effects of positive affect on working memory (WM) and short-term memory (STM). Given that WM involves both storage and controlled processing and that STM primarily involves storage processing, we hypothesised that if positive affect facilitates controlled processing, it should improve WM more than STM. The results demonstrated that positive affect, compared with neutral affect, significantly enhanced WM, as measured by the operation span task. The influence of positive affect on STM, however, was weaker. These results suggest that positive affect enhances WM, a task that involves controlled processing, not just storage processing. Additional analyses of recall and processing times and accuracy further suggest that improved WM under positive affect is not attributable to motivational differences, but results instead from improved controlled cognitive processing.

Individual questions of financial control and revision

Directory of Open Access Journals (Sweden)

В. М. Глібко

2015-05-01

Full Text Available Problem setting. In modern conditions at investigation and gathering of proofs in criminal proceedings according to item 93 CPC of Ukraine collecting of proofs which is carried out by the criminal proceedings parties, victim is important, the representative of the legal person, in which relation carries out manufacture, including a way истребования and receptions from public authorities, local governments, the enterprises, establishments and organisations, official and physical persons of things, documents, data, conclusions of experts, conclusions of revisions and certificates of checks. Recent research and publications analisis. In scientific sources questions of carrying out of revisions S. B.Zhivko, V.V.Akimov, G.Demjanchuk, J.Buzdugan is considered. Paper objective. Article purpose is studying and definition of a place of revision among forms of inspection of the state control and use of results of revision in criminal proceedings. Paper main body. Off-schedule exit revision that is revision which is not provided in plans of work of body of the state financial control is considered and is spent at presence at least one of the circumstances listed in item 11 of the Law of Ukraine «About main principles of realisation of the state financial control in Ukraine». If revision is carried out on request of investigating bodies it is spent on the basis of the petition of the inspector and accepted by the results of consideration of this petition of the decision of the investigatory judge. The primary goal of revision on request of investigating bodies or on the basis of court definition is reception of proofs on business. Therefore the revision certificate admits the written proof as on the basis of its conclusion of the inspector, the public prosecutor receives the information on a perfect crime, abusing, and also on the persons who have committed a crime, on the period of commission of crime and an amount of damage. In criminal

Plasma position and shape control for ITER

International Nuclear Information System (INIS)

Portone, A.; Gribov, Y.; Huguet, M.

1995-01-01

Key features and main results about the control of the plasma shape in ITER are presented. A control algorithm is designed to control up to 6 gaps between the plasma separatrix and the plasma facing components during the reference burn phase. Nonlinear simulations show the performances of the controller in the presence of plasma vertical position offsets, beta drops and power supply voltage saturation

Fractional-order positive position feedback compensator for active vibration control of a smart composite plate

Science.gov (United States)

Marinangeli, L.; Alijani, F.; HosseinNia, S. Hassan

2018-01-01

In this paper, Active Vibration Control (AVC) of a rectangular carbon fibre composite plate with free edges is presented. The plate is subjected to out-of-plane excitation by a modal vibration exciter and controlled by Macro Fibre Composite (MFC) transducers. Vibration measurements are performed by using a Laser Doppler Vibrometer (LDV) system. A fractional-order Positive Position Feedback (PPF) compensator is proposed, implemented and compared to the standard integer-order PPF. MFC actuator and sensor are positioned on the plate based on maximal modal strain criterion, so as to control the second natural mode of the plate. Both integer and fractional-order PPF allowed for the effective control of the second mode of vibration. However, the newly proposed fractional-order controller is found to be more efficient in achieving the same performance with less actuation voltage. Moreover, it shows promising performance in reducing spillover effect due to uncontrolled modes.

Modeling And Position Control Of Scara Type 3D Printer

Directory of Open Access Journals (Sweden)

Ahmet Saygamp305n Ogulmuamp351

2015-08-01

Full Text Available In this work a scara robot type 3D printer system is dynamically modeled and position control of the system is realized. For this aim computer aided design model of three degrees of freedom robotic system is created using SolidWorks program then obtained model is exported to MATLABSimMechanics software for position control. Also mathematical model of servo motors used in robotic 3D printer system is included in control methodology to design proportional controllers. Uncontrolled and controlled position results are simulated and given in the form of the graphics.

Positive Exchange of Flight Controls Program

Science.gov (United States)

1995-03-10

This advisory circular provides guidance for all pilots, especially student pilots, flight instructors, and pilot examiners, on the recommended procedure to use for the positive exchange of flight controls between pilots when operating an aircraft.

Experimental Study on Position Control System Using Encoderless Magnetic Motion

Energy Technology Data Exchange (ETDEWEB)

Kim, Hong Youn; Heo, Hoon [Korea Univ., Seoul (Korea, Republic of); Yun, Young Min; Shim, Ho Keun; Kwon, Young Mok [TPC Mechatronics, Daejeon (Korea, Republic of)

2016-01-15

A position control system composed of the PMLSM(Permanent Magnet Linear Synchronous Motor), unlike conventional linear permanent magnet synchronous motor is fixed to the permanent magnet moving coil rails (permanent magnet = stator, coil = mover), the coil is fixed, moving the permanent magnet, we propose a position control system (permanent magnet = mover, coil = stator) structure. Position is measured not using conventional encoder or resolver but by adopting vector control method using 2 hall sensors generating rectangular signal. This method estimate the velocity and position of mover by using the quadruple of two hall sensor signal instead of encoder signal. Vector control of PMLSM using 2 hall sensor generating rectangular wave is proved to control the system stable and efficiently through simulation. Also hardware experiment reveals that the position control performance is measured within the range of 30-50μ in the accuracy of 10-20μ, which is improved twice to the conventional method. The proposed method exhibits its economical efficiency and practical usefulness. The vector control technique using two hall sensors can be installed in narrow place, accordingly it can be implemented on the system where the conventional encoder or resolver cannot operate.

Position Control of a Pneumatic Muscle Actuator Using RBF Neural Network Tuned PID Controller

Directory of Open Access Journals (Sweden)

Jie Zhao

2015-01-01

Full Text Available Pneumatic Muscle Actuator (PMA has a broad application prospect in soft robotics. However, PMA has highly nonlinear and hysteretic properties among force, displacement, and pressure, which lead to difficulty in accurate position control. A phenomenological model is developed to portray the hysteretic behavior of PMA. This phenomenological model consists of linear component and hysteretic component force. The latter component is described by Duhem model. An experimental apparatus is built up and sets of experimental data are acquired. Based on the experimental data, parameters of the model are identified. Validation of the model is performed. Then a novel cascade position PID controller is devised for a 1-DOF manipulator actuated by PMA. The outer loop of the controller is to cope with position control whilst the inner loop deals with pressure dynamics within PMA. To enhance the adaptability of the PID algorithm to the high nonlinearities of the manipulator, PID parameters are tuned online using RBF Neural Network. Experiments are performed and comparison between position response of RBF Neural Network based PID controller and that of classic PID controller demonstrates the effectiveness of the novel adaptive controller on the manipulator.

Development of Vision Control Scheme of Extended Kalman filtering for Robot's Position Control

International Nuclear Information System (INIS)

Jang, W. S.; Kim, K. S.; Park, S. I.; Kim, K. Y.

2003-01-01

It is very important to reduce the computational time in estimating the parameters of vision control algorithm for robot's position control in real time. Unfortunately, the batch estimation commonly used requires too murk computational time because it is iteration method. So, the batch estimation has difficulty for robot's position control in real time. On the other hand, the Extended Kalman Filtering(EKF) has many advantages to calculate the parameters of vision system in that it is a simple and efficient recursive procedures. Thus, this study is to develop the EKF algorithm for the robot's vision control in real time. The vision system model used in this study involves six parameters to account for the inner(orientation, focal length etc) and outer (the relative location between robot and camera) parameters of camera. Then, EKF has been first applied to estimate these parameters, and then with these estimated parameters, also to estimate the robot's joint angles used for robot's operation. finally, the practicality of vision control scheme based on the EKF has been experimentally verified by performing the robot's position control

Four Principles for Selecting HCI Research Questions

DEFF Research Database (Denmark)

Clemmensen, Torkil

In this position paper, I present and explain the position that what we should study in HCI depends on the objective of the research and its political, social, cultural, technological, and historical context. I outline four principles for selecting research questions and give a personal account...... of how I have selected research questions using these four principles. The aim with the paper is to generate discussion and advance the understanding of what to study in HCI....

FPGA based Fuzzy Logic Controller for plasma position control in ADITYA Tokamak

International Nuclear Information System (INIS)

Suratia, Pooja; Patel, Jigneshkumar; Rajpal, Rachana; Kotia, Sorum; Govindarajan, J.

2012-01-01

Highlights: ► Evaluation and comparison of the working performance of FLC is done with that of PID Controller. ► FLC is designed using MATLAB Fuzzy Logic Toolbox, and validated on ADITYA RZIP model. ► FLC was implemented on a FPGA. The close-loop testing is done by interfacing FPGA to MATLAB/Simulink. ► Developed FLC controller is able to maintain the plasma column within required range of ±0.05 m and was found to give robust control against various disturbances and faster and smoother response compared to PID Controller. - Abstract: Tokamaks are the most promising devices for obtaining nuclear fusion energy from high-temperature, ionized gas termed as Plasma. The successful operation of tokamak depends on its ability to confine plasma at the geometric center of vacuum vessel with sufficient stability. The quality of plasma discharge in ADITYA Tokamak is strongly related to the radial position of the plasma column in the vacuum vessel. If the plasma column approaches too near to the wall of vacuum vessel, it leads to minor or complete disruption of plasma. Hence the control of plasma position throughout the entire plasma discharge duration is a fundamental requirement. This paper describes Fuzzy Logic Controller (FLC) which is designed for radial plasma position control. This controller is tested and evaluated on the ADITYA RZIP control model. The performance of this FLC was compared with that of Proportional–Integral–Derivative (PID) Controller and the response was found to be faster and smoother. FLC was implemented on a Field Programmable Gate Array (FPGA) chip with the use of a Very High-Speed Integrated-Circuits Hardware Description-Language (VHDL).

Questioning the Questions

Science.gov (United States)

Tienken, Christopher H.; Goldberg, Stephanie; DiRocco, Dominic

2010-01-01

Historical accounts of questioning used in the education process trace back to Socrates. One of the best examples of his use of questioning is found in Plato's "The Republic." Socrates used a series of strategic questions to help his student Glaucon come to understand the concept of justice. Socrates purposefully posed a series of…

Car-Like Mobile Robot Oriented Positioning by Fuzzy Controllers

Directory of Open Access Journals (Sweden)

Noureddine Ouadah

2008-09-01

Full Text Available In this paper, fuzzy logic controllers (FLC are used to implement an efficient and accurate positioning of an autonomous car-like mobile robot, respecting final orientation. To accomplish this task, called “Oriented Positioning”, two FLC have been developed: robot positioning controller (RPC and robot following controller (RFC. Computer simulation results illustrate the effectiveness of the proposed technique. Finally, real-time experiments have been made on an autonomous car-like mobile robot called “Robucar”, developed to perform people transportation. Obtained results from experiments demonstrate the effectiveness of the proposed control strategy.

A compound control strategy combining velocity compensation with ADRC of electro-hydraulic position servo control system.

Science.gov (United States)

Gao, Bingwei; Shao, Junpeng; Yang, Xiaodong

2014-11-01

In order to enhance the anti-jamming ability of electro-hydraulic position servo control system at the same time improve the control precision of the system, a compound control strategy that combines velocity compensation with Active Disturbance Rejection Controller (ADRC) is proposed, and the working principle of the compound control strategy is given. ADRC controller is designed, and the extended state observer is used for observing internal parameters uncertainties and external disturbances, so that the disturbances of the system are suppressed effectively. Velocity compensation controller is designed and the compensation model is derived to further improve the positioning accuracy of the system and to achieve the velocity compensation without disturbance. The compound control strategy is verified by the simulation and experiment respectively, and the simulation and experimental results show that the electro-hydraulic position servo control system with ADRC controller can effectively inhibit the external disturbances, the precise positioning control is realized after introducing the velocity compensation controller, and verify that the compound control strategy is effective. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

Control of spool position of on/off solenoid operated hydraulic valve by sliding-mode controller

Energy Technology Data Exchange (ETDEWEB)

Lee, Jae Hak; Hong, Hyun Wook; Park, Myeong Kwan [Pusan National University, Busan (Korea, Republic of); Yun, Young Won [KHPS, Busan (Korea, Republic of)

2015-11-15

The use of on/off solenoid operated hydraulic valves instead of proportional valves has been attracting the interest of many researchers and engineers. However, there exist difficulties in controlling the on/off valve because of highly nonlinear characteristics including hysteresis and saturation. This paper considers the application of on/off solenoid operated hydraulic valves to control position of a hydraulic cylinder with the aim of evaluating, feasibility and practicability of their implementation and understanding the potential benefits when they are used in existing hydraulic systems. Assuming that only the current is measured, a sliding mode observer is designed to estimate the spool position and velocity. To alleviate the aforementioned difficulties in controlling the spool position, a nonlinear observer-based controller of an on/off solenoid valve is designed, taking into account the estimated values, based on a nonlinear model including hysteresis and saturation. The control objective is to track a desired spool trajectory. Simulation and experimental results illustrate the efficiency of the designed controller. The proposed controller is validated again in a single-rod hydraulic actuator. Experimental results show that the fluid flow through the valve orifice by controlling the spool position was successfully controlled.

Positive Eigenvalues of Generalized Words in Two Hermitian Positive Definite Matrices

OpenAIRE

Hillar, Christopher; Johnson, Charles R.

2005-01-01

We define a word in two positive definite (complex Hermitian) matrices $A$ and $B$ as a finite product of real powers of $A$ and $B$. The question of which words have only positive eigenvalues is addressed. This question was raised some time ago in connection with a long-standing problem in theoretical physics, and it was previously approached by the authors for words in two real positive definite matrices with positive integral exponents. A large class of words that do guarantee positive eig...

Peer Positive Social Control and Men's Health-Promoting Behaviors.

Science.gov (United States)

Houle, Janie; Meunier, Sophie; Coulombe, Simon; Mercerat, Coralie; Gaboury, Isabelle; Tremblay, Gilles; de Montigny, Francine; Cloutier, Lyne; Roy, Bernard; Auger, Nathalie; Lavoie, Brigitte

2017-09-01

Men are generally thought to be less inclined to take care of their health. To date, most studies about men's health have focused on deficits in self-care and difficulties in dealing with this sphere of their life. The present study reframes this perspective, using a salutogenic strengths-based approach and seeking to identify variables that influence men to take care of their health, rather than neglect it. This study focuses on the association between peer positive social control and men's health behaviors, while controlling for other important individual and social determinants (sociodemographic characteristics, health self-efficacy, home neighborhood, spousal positive social control, and the restrictive emotionality norm). In a mixed-method study, 669 men answered a self-reported questionnaire, and interviews were conducted with a maximum variation sample of 31 men. Quantitative results indicated that, even after controlling for sociodemographic variables and other important factors, peer positive social control was significantly associated with the six health behaviors measured in the study (health responsibility, nutrition, physical activity, interpersonal relations, stress management, and spirituality). Interview results revealed that peer positive social control influenced men's health behaviors through three different mechanisms: shared activity, being inspired, and serving as a positive role model for others. In summary, friends and coworkers could play a significant role in promoting various health behaviors among adult men in their daily life. Encouraging men to socialize and discuss health, and capitalizing on healthy men as role models appear to be effective ways to influence health behavior adoption among this specific population.

Position Control of Linear Synchronous Motor Drives with Exploitation of Forced Dynamics Control Principles

Directory of Open Access Journals (Sweden)

Jan Vittek

2004-01-01

Full Text Available Closed-loop position control of mechanisms directly driven by linear synchronous motors with permanent magnets is presented. The control strategy is based on forced dynamic control, which is a form of feedback linearisation, yielding a non-liner multivariable control law to obtain a prescribed linear speed dynamics together with the vector control condition of mutal orthogonality between the stator current and magnetic flux vectors (assuming perfect estimates of the plant parameters. Outer position control loop is closed via simple feedback with proportional gain. Simulations of the design control sysstem, including the drive with power electronic switching, predict the intended drive performance.

The Value Question in Metaphysics

Science.gov (United States)

Kahane, Guy

2012-01-01

Much seems to be at stake in metaphysical questions about, for example, God, free will or morality. One thing that could be at stake is the value of the universe we inhabit—how good or bad it is. We can think of competing philosophical positions as describing possibilities, ways the world might turn out to be, and to which value can be assigned. When, for example, people hope that God exists, or fear that we do not possess free will, they express attitudes towards these possibilities, attitudes that presuppose answers to questions about their comparative value. My aim in this paper is to distinguish these evaluative questions from related questions with which they can be confused, to identify structural constraints on their proper pursuit, and to address objections to their very coherence. Answers to such evaluative questions offer one measure of the importance of philosophical disputes. PMID:23024399

The Value Question in Metaphysics.

Science.gov (United States)

Kahane, Guy

2012-07-01

Much seems to be at stake in metaphysical questions about, for example, God, free will or morality. One thing that could be at stake is the value of the universe we inhabit-how good or bad it is. We can think of competing philosophical positions as describing possibilities, ways the world might turn out to be, and to which value can be assigned. When, for example, people hope that God exists, or fear that we do not possess free will, they express attitudes towards these possibilities, attitudes that presuppose answers to questions about their comparative value. My aim in this paper is to distinguish these evaluative questions from related questions with which they can be confused, to identify structural constraints on their proper pursuit, and to address objections to their very coherence. Answers to such evaluative questions offer one measure of the importance of philosophical disputes.

A digital position-indication system for control rods

International Nuclear Information System (INIS)

Nishizawa, Yukio; Hayakawa, Toshifumi

1979-01-01

Systems that detect and indicate the position of the control rods that regulate the thermal output of a nuclear reactor play a particularly important role in monitoring its operational status. Conventionally, control rod position indication in pressurized water reactors has been of the analog type, utilizing the principle of the differential transformer. The present digital system was developed with the objective of achieving greater stability, greater accuracy, and higher reliability. The article gives a general description of the system and describes its advantages. (author)

INDUSTRIAL CONTROL SYSTEM CYBER SECURITY: QUESTIONS AND ANSWERS RELEVANT TO NUCLEAR FACILITIES, SAFEGUARDS AND SECURITY

Energy Technology Data Exchange (ETDEWEB)

Robert S. Anderson; Mark Schanfein; Trond Bjornard; Paul Moskowitz

2011-07-01

Typical questions surrounding industrial control system (ICS) cyber security always lead back to: What could a cyber attack do to my system(s) and; how much should I worry about it? These two leading questions represent only a fraction of questions asked when discussing cyber security as it applies to any program, company, business, or organization. The intent of this paper is to open a dialog of important pertinent questions and answers that managers of nuclear facilities engaged in nuclear facility security and safeguards should examine, i.e., what questions should be asked; and how do the answers affect an organization's ability to effectively safeguard and secure nuclear material. When a cyber intrusion is reported, what does that mean? Can an intrusion be detected or go un-noticed? Are nuclear security or safeguards systems potentially vulnerable? What about the digital systems employed in process monitoring, and international safeguards? Organizations expend considerable efforts to ensure that their facilities can maintain continuity of operations against physical threats. However, cyber threats particularly on ICSs may not be well known or understood, and often do not receive adequate attention. With the disclosure of the Stuxnet virus that has recently attacked nuclear infrastructure, many organizations have recognized the need for an urgent interest in cyber attacks and defenses against them. Several questions arise including discussions about the insider threat, adequate cyber protections, program readiness, encryption, and many more. These questions, among others, are discussed so as to raise the awareness and shed light on ways to protect nuclear facilities and materials against such attacks.

Industrial Control System Cyber Security: Questions And Answers Relevant To Nuclear Facilities, Safeguards And Security

International Nuclear Information System (INIS)

Anderson, Robert S.; Schanfein, Mark; Bjornard, Trond; Moskowitz, Paul

2011-01-01

Typical questions surrounding industrial control system (ICS) cyber security always lead back to: What could a cyber attack do to my system(s) and; how much should I worry about it? These two leading questions represent only a fraction of questions asked when discussing cyber security as it applies to any program, company, business, or organization. The intent of this paper is to open a dialog of important pertinent questions and answers that managers of nuclear facilities engaged in nuclear facility security and safeguards should examine, i.e., what questions should be asked; and how do the answers affect an organization's ability to effectively safeguard and secure nuclear material. When a cyber intrusion is reported, what does that mean? Can an intrusion be detected or go un-noticed? Are nuclear security or safeguards systems potentially vulnerable? What about the digital systems employed in process monitoring, and international safeguards? Organizations expend considerable efforts to ensure that their facilities can maintain continuity of operations against physical threats. However, cyber threats particularly on ICSs may not be well known or understood, and often do not receive adequate attention. With the disclosure of the Stuxnet virus that has recently attacked nuclear infrastructure, many organizations have recognized the need for an urgent interest in cyber attacks and defenses against them. Several questions arise including discussions about the insider threat, adequate cyber protections, program readiness, encryption, and many more. These questions, among others, are discussed so as to raise the awareness and shed light on ways to protect nuclear facilities and materials against such attacks.

INDOOR POSITIONING AND NAVIGATION BASED ON CONTROL SPHERECAL PANORAMIC IMAGES

Directory of Open Access Journals (Sweden)

T.-C. Huang

2016-06-01

Full Text Available Continuous indoor and outdoor positioning and navigation is the goal to achieve in the field of mobile mapping technology. However, accuracy of positioning and navigation will be largely degraded in indoor or occluded areas, due to receiving weak or less GNSS signals. Targeting the need of high accuracy indoor and outdoor positioning and navigation for mobile mapping applications, the objective of this study is to develop a novel method of indoor positioning and navigation with the use of spherical panoramic image (SPI. Two steps are planned in the technology roadmap. First, establishing a control SPI database that contains a good number of well-distributed control SPIs pre-acquired in the target space. A control SPI means an SPI with known exterior orientation parameters, which can be solved with a network bundle adjustment of SPIs. Having a control SPI database, the target space will be ready to provide the service of positioning and navigation. Secondly, the position and orientation of a newly taken SPI can be solved by using overlapped SPIs searched from the control SPI database. The method of matching SPIs and finding conjugate image features will be developed and tested. Two experiments will be planned and conducted in this paper to test the feasibility and validate the test results of the proposed methods. Analysis of appropriate number and distribution of needed control SPIs will also be included in the experiments with respect to different test cases.

Selective control of attention supports the positivity effect in aging.

Science.gov (United States)

Sasse, Laura K; Gamer, Matthias; Büchel, Christian; Brassen, Stefanie

2014-01-01

There is emerging evidence for a positivity effect in healthy aging, which describes an age-specific increased focus on positive compared to negative information. Life-span researchers have attributed this effect to the selective allocation of cognitive resources in the service of prioritized emotional goals. We explored the basic principles of this assumption by assessing selective attention and memory for visual stimuli, differing in emotional content and self-relevance, in young and old participants. To specifically address the impact of cognitive control, voluntary attentional selection during the presentation of multiple-item displays was analyzed and linked to participants' general ability of cognitive control. Results revealed a positivity effect in older adults' selective attention and memory, which was particularly pronounced for self-relevant stimuli. Focusing on positive and ignoring negative information was most evident in older participants with a generally higher ability to exert top-down control during visual search. Our findings highlight the role of controlled selectivity in the occurrence of a positivity effect in aging. Since the effect has been related to well-being in later life, we suggest that the ability to selectively allocate top-down control might represent a resilience factor for emotional health in aging.

Robust position control of induction motor using fuzzy logic control

International Nuclear Information System (INIS)

Kim, Sei Chan; Kim, Duk Hun; Yang, Seung Ho; Won, Chung Yuen

1993-01-01

In recent years, fuzzy logic or fuzzy set theory has reveived attention of a number of researchers in the area of power electronics and motion control. The paper describes a vector-controlled induction motor position servo drive where fuzzy control is used to get robustness against parameter variation and load torque disturbance effects. Both coarse and fine control with the help of look-up rule tables are used to improve transient response and system settling time. The performance characteristics are then compared with those of proportional-integral(PI) control. The simulation results clearly indicate the superiority of fuzzy control with larger number of rules. The fuzzy controller was implemented with a 16-bit microprocessor and tested in laboratory on a 3-hp IGBT inverter induction motor drive system. The test results verify the simulation performance. (Author)

Novel electro-hydraulic position control system for primary mirror supporting system

Directory of Open Access Journals (Sweden)

Xiongbin Peng

2016-05-01

Full Text Available In the field of modern large-scale telescope, primary mirror supporting system technology faces the difficulties of theoretically uniform output force request and bias compensation. Therefore, a novel position control system combining hydraulic system with servo motor system is introduced. The novel system ensures uniform output force on supporting points without complicating the mechanical structure. The structures of both primary mirror supporting system and novel position system are described. Then, the mathematical model of novel position control system is derived for controller selection. A proportional–derivative controller is adopted for simulations and experiments of step response and triangle path tracking. The results show that proportional–derivative controller guarantees the system with micrometer-level positioning ability. A modified proportional–derivative controller is utilized to promote system behavior with faster response overshoot. The novel position control system is then applied on primary mirror supporting system. Coupling effect is observed among actuator partitions, and relocation of virtual pivot supporting point is chosen as the decoupling measurement. The position keeping ability of the primary mirror supporting system is verified by rotating the mirror cell at a considerably high rate. The experiment results show that the decoupled system performs better with smaller bias and shorter recovery time.

Selective control of attention supports the positivity effect in aging.

Directory of Open Access Journals (Sweden)

Laura K Sasse

Full Text Available There is emerging evidence for a positivity effect in healthy aging, which describes an age-specific increased focus on positive compared to negative information. Life-span researchers have attributed this effect to the selective allocation of cognitive resources in the service of prioritized emotional goals. We explored the basic principles of this assumption by assessing selective attention and memory for visual stimuli, differing in emotional content and self-relevance, in young and old participants. To specifically address the impact of cognitive control, voluntary attentional selection during the presentation of multiple-item displays was analyzed and linked to participants' general ability of cognitive control. Results revealed a positivity effect in older adults' selective attention and memory, which was particularly pronounced for self-relevant stimuli. Focusing on positive and ignoring negative information was most evident in older participants with a generally higher ability to exert top-down control during visual search. Our findings highlight the role of controlled selectivity in the occurrence of a positivity effect in aging. Since the effect has been related to well-being in later life, we suggest that the ability to selectively allocate top-down control might represent a resilience factor for emotional health in aging.

Incentive-Rewarding Mechanism for User-position Control in Mobile Services

Science.gov (United States)

Yoshino, Makoto; Sato, Kenichiro; Shinkuma, Ryoichi; Takahashi, Tatsuro

When the number of users in a service area increases in mobile multimedia services, no individual user can obtain satisfactory radio resources such as bandwidth and signal power because the resources are limited and shared. A solution for such a problem is user-position control. In the user-position control, the operator informs users of better communication areas (or spots) and navigates them to these positions. However, because of subjective costs caused by subjects moving from their original to a new position, they do not always attempt to move. To motivate users to contribute their resources in network services that require resource contributions for users, incentive-rewarding mechanisms have been proposed. However, there are no mechanisms that distribute rewards appropriately according to various subjective factors involving users. Furthermore, since the conventional mechanisms limit how rewards are paid, they are applicable only for the network service they targeted. In this paper, we propose a novel incentive-rewarding mechanism to solve these problems, using an external evaluator and interactive learning agents. We also investigated ways of appropriately controlling rewards based on user contributions and system service quality. We applied the proposed mechanism and reward control to the user-position control, and demonstrated its validity.

Position calibration of a 3-DOF hand-controller with hybrid structure

Science.gov (United States)

Zhu, Chengcheng; Song, Aiguo

2017-09-01

A hand-controller is a human-robot interactive device, which measures the 3-DOF (Degree of Freedom) position of the human hand and sends it as a command to control robot movement. The device also receives 3-DOF force feedback from the robot and applies it to the human hand. Thus, the precision of 3-DOF position measurements is a key performance factor for hand-controllers. However, when using a hybrid type 3-DOF hand controller, various errors occur and are considered originating from machining and assembly variations within the device. This paper presents a calibration method to improve the position tracking accuracy of hybrid type hand-controllers by determining the actual size of the hand-controller parts. By re-measuring and re-calibrating this kind of hand-controller, the actual size of the key parts that cause errors is determined. Modifying the formula parameters with the actual sizes, which are obtained in the calibrating process, improves the end position tracking accuracy of the device.

New approach for control rod position indication system for light water power reactor

International Nuclear Information System (INIS)

Bahuguna, Sushil; Dhage, Sangeeta; Nawaj, S.; Salek, C.; Lahiri, S.K.; Marathe, P.P.; Mukhopadhyay, S.; Taly, Y.K.

2015-01-01

Control rod position indication system is an important system in a nuclear power plant to monitor and display control rod position in all regimes of reactor operation. A new approach to design a control rod position indication system for sensing absolute position of control rod in Light Water Power Reactor has been undertaken. The proposed system employs an inductive type, hybrid measurement strategy providing both analog position as well as digital zone indication with built-in temperature compensation. The new design approach meets single failure criterion through redundancy in design without sacrificing measurement resolution. It also provides diversity in measurement technique by indirect position sensing based on analysis of drive coil current signature. Prototype development and qualification at room temperature of the control rod position indication system (CRPIS) has been demonstrated. The article presents the design philosophy of control rod position indication system, the new measurement strategy for sensing absolute position of control rod, position estimation algorithm for both direct and indirect sensing and a brief account associated processing electronics. (author)

Preliminary performance test of control rod position indicator for ballscrew type CEDM

International Nuclear Information System (INIS)

Yoo, J. Y.; Kim, J. H.; Hu, H.; Lee, J. S.; Kim, J. I.

2003-01-01

The reliability and accuracy of the information on control rod position are very important to the reactor safety and the design of the core protection system. A survey on the RSPT(Reed Switch Position Transmitter) type control rod position indication system and its actual implementation in the exiting nuclear power plants in Korea was performed first. The prototype of control rod position indicator having the high performance for the ballscrew type CEDM was developed on the basis of RSPT technology identified through the survey. The characteristics of control rod position indicator was defined and documented through design procedure and preliminary performance test

Design and reliability analysis of DP-3 dynamic positioning control architecture

Science.gov (United States)

Wang, Fang; Wan, Lei; Jiang, Da-Peng; Xu, Yu-Ru

2011-12-01

As the exploration and exploitation of oil and gas proliferate throughout deepwater area, the requirements on the reliability of dynamic positioning system become increasingly stringent. The control objective ensuring safety operation at deep water will not be met by a single controller for dynamic positioning. In order to increase the availability and reliability of dynamic positioning control system, the triple redundancy hardware and software control architectures were designed and developed according to the safe specifications of DP-3 classification notation for dynamically positioned ships and rigs. The hardware redundant configuration takes the form of triple-redundant hot standby configuration including three identical operator stations and three real-time control computers which connect each other through dual networks. The function of motion control and redundancy management of control computers were implemented by software on the real-time operating system VxWorks. The software realization of task loose synchronization, majority voting and fault detection were presented in details. A hierarchical software architecture was planed during the development of software, consisting of application layer, real-time layer and physical layer. The behavior of the DP-3 dynamic positioning control system was modeled by a Markov model to analyze its reliability. The effects of variation in parameters on the reliability measures were investigated. The time domain dynamic simulation was carried out on a deepwater drilling rig to prove the feasibility of the proposed control architecture.

Structure of the automatic system for plasma equilibrium position control

International Nuclear Information System (INIS)

Gubarev, V.F.; Krivonos, Yu.G.; Samojlenko, Yu.I.; Snegur, A.A.

1978-01-01

Considered are the principles of construction of the automatic system for plasma filament equilibrium position control inside the discharge chamber for the installation of a tokamak type. The combined current control system in control winding is suggested. The most powerful subsystem creates current in the control winding according to the program calculated beforehand. This system provides plasma rough equilibrium along the ''big radius''. The subsystem performing the current change in small limits according to the principle of feed-back coupling is provided simultaneously. The stabilization of plasma position is achieved in the discharge chamber. The advantage of construction of such system is in decreasing of the automatic requlator power without lowering the requirements to the accuracy of equilibrium preservation. The subsystem of automatic control of plasma position over the vertical is put into the system. Such an approach to the construction of the automatic control system proves to be correct; it is based on the experience of application of similar devices for some existing thermonuclear plants

Hysteresis Analysis and Positioning Control for a Magnetic Shape Memory Actuator

Science.gov (United States)

Lin, Jhih-Hong; Chiang, Mao-Hsiung

2015-01-01

Magnetic shape memory alloys (MSM alloys), a new kind of smart materials, have become a potential candidate in many engineering fields. MSMs have the advantage of bearing a huge strain, much larger than other materials. In addition, they also have fast response. These characteristics make MSM a good choice in micro engineering. However, MSMs display the obvious hysteresis phenomenon of nonlinear behavior. Thus the difficulty in using the MSM element as a positioning actuator is increased due to the hysteresis. In this paper, the hysteresis phenomenon of the MSM actuator is analyzed, and the closed-loop positioning control is also implemented experimentally. For that, a modified fuzzy sliding mode control (MFSMC) is proposed. The MFSMC and the PID control are used to design the controllers for realizing the positioning control. The experimental results are compared under different experimental conditions, such as different frequency, amplitude, and loading. The experimental results show that the precise positioning control of MFSMC can be achieved satisfactorily. PMID:25853405

Attentional control mediates the effect of social anxiety on positive affect☆

Science.gov (United States)

Morrison, Amanda S.; Heimberg, Richard G.

2015-01-01

The goal of the present studies was to examine whether attentional control, a self-regulatory attentional mechanism, mediates the effect of social anxiety on positive affect. We tested this mediation in two studies using undergraduate students selected to represent a broad range of severity of social anxiety. Self-report assessments of social anxiety, attentional control, and positive affect were collected in a cross-sectional design (Study 1) and in a longitudinal design with three assessment points (Study 2). Results of both studies supported the hypothesized mediational model. Specifically, social anxiety was inversely related to attentional control, which itself positively predicted positive affect. This mediation remained significant even when statistically controlling for the effects of depression. Additionally, the hypothesized model provided superior model fit to theoretically-grounded equivalent models in both studies. Implications of these findings for understanding diminished positive affect in social anxiety are discussed. PMID:23254261

Integrated shell approach to vertical position control on PBX-M

International Nuclear Information System (INIS)

Hatcher, R.E.; Okabayashi, M.

1995-03-01

The PBX-M device produces highly shaped discharges that, because of the negative external magnetic field decay index required, are vertically unstable. Vertical positional stability in PBX-M has been achieved by directly controlling the n = 0 component of the eddy current in the passive shell instead of the commonly used function of magnetic flux signals. Because the active coil is controlled via currents in the passive shell we call this an ''integrated shell'' approach to vertical position control. We present results of these experiments and make comparisons between the two methods of control

Position Control of the Single Spherical Wheel Mobile Robot by Using the Fuzzy Sliding Mode Controller

Directory of Open Access Journals (Sweden)

Hamed Navabi

2017-01-01

Full Text Available A spherical wheel robot or Ballbot—a robot that balances on an actuated spherical ball—is a new and recent type of robot in the popular area of mobile robotics. This paper focuses on the modeling and control of such a robot. We apply the Lagrangian method to derive the governing dynamic equations of the system. We also describe a novel Fuzzy Sliding Mode Controller (FSMC implemented to control a spherical wheel mobile robot. The nonlinear nature of the equations makes the controller nontrivial. We compare the performance of four different fuzzy controllers: (a regulation with one signal, (b regulation and position control with one signal, (c regulation and position control with two signals, and (d FSMC for regulation and position control with two signals. The system is evaluated in a realistic simulation and the robot parameters are chosen based on a LEGO platform, so the designed controllers have the ability to be implemented on real hardware.

Application of Adaptive Sliding Mode Position Controller with PI ...

African Journals Online (AJOL)

PISMC) techniques for controlling the rotor position of PMDC motor drive system. In particular, since SMC is robust in the presence of the matched uncertainties and external disturbances, the desired position is perfectly tracked. In addition, the ...

VQABQ: Visual Question Answering by Basic Questions

KAUST Repository

Huang, Jia-Hong

2017-03-19

Taking an image and question as the input of our method, it can output the text-based answer of the query question about the given image, so called Visual Question Answering (VQA). There are two main modules in our algorithm. Given a natural language question about an image, the first module takes the question as input and then outputs the basic questions of the main given question. The second module takes the main question, image and these basic questions as input and then outputs the text-based answer of the main question. We formulate the basic questions generation problem as a LASSO optimization problem, and also propose a criterion about how to exploit these basic questions to help answer main question. Our method is evaluated on the challenging VQA dataset and yields state-of-the-art accuracy, 60.34% in open-ended task.

VQABQ: Visual Question Answering by Basic Questions

KAUST Repository

Huang, Jia-Hong; Alfadly, Modar; Ghanem, Bernard

2017-01-01

Taking an image and question as the input of our method, it can output the text-based answer of the query question about the given image, so called Visual Question Answering (VQA). There are two main modules in our algorithm. Given a natural language question about an image, the first module takes the question as input and then outputs the basic questions of the main given question. The second module takes the main question, image and these basic questions as input and then outputs the text-based answer of the main question. We formulate the basic questions generation problem as a LASSO optimization problem, and also propose a criterion about how to exploit these basic questions to help answer main question. Our method is evaluated on the challenging VQA dataset and yields state-of-the-art accuracy, 60.34% in open-ended task.

Feedback control of plasma position in the HL-1 tokamak

International Nuclear Information System (INIS)

Yuan Baoshan; Jiao Boliang; Yang Kailing

1991-01-01

In the HL-1 tokamak with a thick copper shell, the control of plasma position is successfully performed by a feedback-feedforward system with dual mode regulator and the equilibrium field coils outside the shell. The plasma position can be controlled within ±2 mm in both vertical and horizontal directions under the condition that the iron core of transformer is not saturated

POSITION CONTROL OF BRUSHLESS DC MOTOR BASED ON DIGITAL SIGNAL PROCESSING

Directory of Open Access Journals (Sweden)

Çetin GENÇER

2006-01-01

Full Text Available Brushless DC Motors (BLDC have been used widely high performance control systems which are depended on to development of power electronic and control technology. In these motors to fed commutated supply, the control of position without oscilation has been required. In this study, position control of BLDC with digital signal processing has been implemented by a proportional-derivative (PD controller because of its simple structure. It has been seen that the controller which is proposed from simulation and experimental studies, has a quick dynamic responce with nonoscillation.

Signal differentiation in position tracking control of dc motors

International Nuclear Information System (INIS)

Beltran-Carbajal, F; Valderrabano-Gonzalez, A; Rosas-Caro, J C

2015-01-01

An asymptotic differentiation approach with respect to time is used for on-line estimation of velocity and acceleration signals in controlled dc motors. The attractive feature of this differentiator of signals is that it does not require any system mathematical model, which allows its use in engineering systems that require the signal differentiation for its control, identification, fault detection, among other applications. Moreover, it is shown that the differentiation approach can be applied for output signals showing a chaotic behavior. In addition a differential flatness control scheme with additional integral compensation of the output error is proposed for tracking tasks of position reference trajectories for direct current electric motors using angular position measurements only

Do questions help? The impact of audience response systems on medical student learning: a randomised controlled trial.

Science.gov (United States)

Mains, Tyler E; Cofrancesco, Joseph; Milner, Stephen M; Shah, Nina G; Goldberg, Harry

2015-07-01

Audience response systems (ARSs) are electronic devices that allow educators to pose questions during lectures and receive immediate feedback on student knowledge. The current literature on the effectiveness of ARSs is contradictory, and their impact on student learning remains unclear. This randomised controlled trial was designed to isolate the impact of ARSs on student learning and students' perception of ARSs during a lecture. First-year medical student volunteers at Johns Hopkins were randomly assigned to either (i) watch a recorded lecture on an unfamiliar topic in which three ARS questions were embedded or (ii) watch the same lecture without the ARS questions. Immediately after the lecture on 5 June 2012, and again 2 weeks later, both groups were asked to complete a questionnaire to assess their knowledge of the lecture content and satisfaction with the learning experience. 92 students participated. The mean (95% CI) initial knowledge assessment score was 7.63 (7.17 to 8.09) for the ARS group (N=45) and 6.39 (5.81 to 6.97) for the control group (N=47), p=0.001. Similarly, the second knowledge assessment mean score was 6.95 (6.38 to 7.52) for the ARS group and 5.88 (5.29 to 6.47) for the control group, p=0.001. The ARS group also reported higher levels of engagement and enjoyment. Embedding three ARS questions within a 30 min lecture increased students' knowledge immediately after the lecture and 2 weeks later. We hypothesise that this increase was due to forced information retrieval by students during the learning process, a form of the testing effect. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Dynamic Positioning of Ships : A nonlinear control design study

NARCIS (Netherlands)

Muhammad, S.

2012-01-01

Dynamic positioning (DP) is relatively a new technique used to maintain the position and heading of ships in various offshore operations. Due to the features like better safety and operating efficiency, DP systems are becoming more and more popular. This thesis mainly focusses on the control system

Position and attitude tracking control for a quadrotor UAV.

Science.gov (United States)

Xiong, Jing-Jing; Zheng, En-Hui

2014-05-01

A synthesis control method is proposed to perform the position and attitude tracking control of the dynamical model of a small quadrotor unmanned aerial vehicle (UAV), where the dynamical model is underactuated, highly-coupled and nonlinear. Firstly, the dynamical model is divided into a fully actuated subsystem and an underactuated subsystem. Secondly, a controller of the fully actuated subsystem is designed through a novel robust terminal sliding mode control (TSMC) algorithm, which is utilized to guarantee all state variables converge to their desired values in short time, the convergence time is so small that the state variables are acted as time invariants in the underactuated subsystem, and, a controller of the underactuated subsystem is designed via sliding mode control (SMC), in addition, the stabilities of the subsystems are demonstrated by Lyapunov theory, respectively. Lastly, in order to demonstrate the robustness of the proposed control method, the aerodynamic forces and moments and air drag taken as external disturbances are taken into account, the obtained simulation results show that the synthesis control method has good performance in terms of position and attitude tracking when faced with external disturbances. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

Study of Globus-M Tokamak Poloidal System and Plasma Position Control

Science.gov (United States)

Dokuka, V. N.; Korenev, P. S.; Mitrishkin, Yu. V.; Pavlova, E. A.; Patrov, M. I.; Khayrutdinov, R. R.

2017-12-01

In order to provide efficient performance of tokamaks with vertically elongated plasma position, control systems for limited and diverted plasma configuration are required. The accuracy, stability, speed of response, and reliability of plasma position control as well as plasma shape and current control depend on the performance of the control system. Therefore, the problem of the development of such systems is an important and actual task in modern tokamaks. In this study, the measured signals from the magnetic loops and Rogowski coils are used to reconstruct the plasma equilibrium, for which linear models in small deviations are constructed. We apply methods of the H∞-optimization theory to the synthesize control system for vertical and horizontal position of plasma capable to working with structural uncertainty of the models of the plant. These systems are applied to the plasma-physical DINA code which is configured for the tokamak Globus-M plasma. The testing of the developed systems applied to the DINA code with Heaviside step functions have revealed the complex dynamics of plasma magnetic configurations. Being close to the bifurcation point in the parameter space of unstable plasma has made it possible to detect an abrupt change in the X-point position from the top to the bottom and vice versa. Development of the methods for reconstruction of plasma magnetic configurations and experience in designing plasma control systems with feedback for tokamaks provided an opportunity to synthesize new digital controllers for plasma vertical and horizontal position stabilization. It also allowed us to test the synthesized digital controllers in the closed loop of the control system with the DINA code as a nonlinear model of plasma.

Using Positive Deviance for Determining Successful Weight-Control Practices

Science.gov (United States)

Stuckey, Heather L.; Boan, Jarol; Kraschnewski, Jennifer L.; Miller-Day, Michelle; Lehman, Erik B.; Sciamanna, Christopher N.

2013-01-01

Based on positive deviance (examining the practices of successful individuals), we identified five primary themes from 36 strategies that help to maintain long-term weight loss (weight control) in 61 people. We conducted in-depth interviews to determine what successful individuals did and/or thought about regularly to control their weight. The themes included weight-control practices related to (a) nutrition: increase water, fruit, and vegetable intake, and consistent meal timing and content; (b) physical activity: follow and track an exercise routine at least 3×/week; (c) restraint: practice restraint by limiting and/or avoiding unhealthy foods; (d) self-monitor: plan meals, and track calories/weight progress; and (e) motivation: participate in motivational programs and cognitive processes that affect weight-control behavior. Using the extensive data involving both the practices and practice implementation, we used positive deviance to create a comprehensive list of practices to develop interventions for individuals to control their weight. PMID:20956609

Variable pattern contamination control under positive pressure

International Nuclear Information System (INIS)

Philippi, H.M.

1997-01-01

Airborne contamination control in nuclear and biological laboratories is traditionally achieved by directing the space ventilation air at subatmospheric pressures in one fixed flow pattern. However, biological and nuclear contamination flow control in the new Biological Research Facility, to be commissioned at the Chalk River Laboratories in 1996, will have the flexibility to institute a number of contamination control patterns, all achieved at positive (above atmospheric) pressures. This flexibility feature, made possible by means of a digitally controlled ventilation system, changes the facility ventilation system from being a relatively rigid building service operated by plant personnel into a flexible building service which can be operated by the facility research personnel. This paper focuses on and describes the application of these unique contamination control features in the design of the new Biological Research Facility. 3 refs., 7 figs

Variable pattern contamination control under positive pressure

Energy Technology Data Exchange (ETDEWEB)

Philippi, H.M. [Chalk River Labs., Ontario (Canada)

1997-08-01

Airborne contamination control in nuclear and biological laboratories is traditionally achieved by directing the space ventilation air at subatmospheric pressures in one fixed flow pattern. However, biological and nuclear contamination flow control in the new Biological Research Facility, to be commissioned at the Chalk River Laboratories in 1996, will have the flexibility to institute a number of contamination control patterns, all achieved at positive (above atmospheric) pressures. This flexibility feature, made possible by means of a digitally controlled ventilation system, changes the facility ventilation system from being a relatively rigid building service operated by plant personnel into a flexible building service which can be operated by the facility research personnel. This paper focuses on and describes the application of these unique contamination control features in the design of the new Biological Research Facility. 3 refs., 7 figs.

Retrospective questions or a diary method? A two-level multitrait-multimethod analysis

NARCIS (Netherlands)

Hox, J.J.; Kleiboer, A.M.

2007-01-01

This study describes a comparison between retrospective questions and daily diaries inquiring about positive and negative support in spousal interactions. The design was a multitrait-multimethod matrix with trait factors of positive and negative support, and method factors of retrospective questions

Questioning Questions: Elementary Teachers' Adaptations of Investigation Questions Across the Inquiry Continuum

Science.gov (United States)

Biggers, Mandy

2018-02-01

Questioning is a central practice in science classrooms. However, not every question translates into a "good" science investigation. Questions that drive science investigations can be provided by many sources including the teacher, the curriculum, or the student. The variations in the source of investigation questions were explored in this study. A dataset of 120 elementary science classroom videos and associated lesson plans from 40 elementary teachers (K-5) across 21 elementary school campuses were scored on an instrument measuring the amount of teacher-direction or student-direction of the lessons' investigation questions. Results indicated that the investigation questions were overwhelmingly teacher directed in nature, with no opportunities for students to develop their own questions for investigation. This study has implications for researchers and practitioners alike, calling attention to the teacher-directed nature of investigation questions in existing science curriculum materials, and the need for teacher training in instructional strategies to adapt their existing curriculum materials across the continuum of teacher-directed and student-directed investigation questions. Teachers need strategies for adapting the teacher-directed questions provided in their existing curriculum materials in order to allow students the opportunity to engage in this essential scientific practice.

Performance estimation of control rod position indicator due to aging of magnet

International Nuclear Information System (INIS)

Yu, Je Yong; Kim, Ji Ho; Huh, Hyung; Choi, Myoung Hwan; Sohn, Dong Seong

2009-01-01

The Control Element Drive Mechanism (CEDM) for the integral reactor is designed to raise and lower the control rod in steps of 2mm in order to satisfy the design features of the integral reactor which are the soluble boron free operation and the use of a nuclear heating for the reactor start-up. The actual position of the control rod could be achieved to sense the magnet connected to the control rod by the position indicator around the upper pressure housing of CEDM. It is sufficient that the actual position information of control rod at 20mm interval from the position indicator is used for the core safety analysis. As the magnet moves upward along the position indicator assembly from the bottom to the top in the upper pressure housing, the output voltage increases linearly step-wise at 0.2VDC increments. Between every step there are transient areas which occur by a contact closing of three reed switches which is the 2-3-2 contact closing sequence. In this paper the output voltage signal corresponding to the position of control rod was estimated on the 2-1-2 contact closing sequence due to the aging of the magnet.

Positive and negative dimensions of weight control motivation.

Science.gov (United States)

Stotland, S; Larocque, M; Sadikaj, G

2012-01-01

This study examined weight control motivation among patients (N=5460 females and 547 males) who sought weight loss treatment with family physicians. An eight-item measure assessed the frequency of thoughts and feelings related to weight control "outcome" (e.g. expected physical and psychological benefits) and "process" (e.g. resentment and doubt). Factor analysis supported the existence of two factors, labeled Positive and Negative motivation. Positive motivation was high (average frequency of thoughts about benefits was 'every day') and stable throughout treatment, while Negative motivation declined rapidly and then stabilized. The determinants of changes in the Positive and Negative dimensions during treatment were examined within 3 time frames: first month, months 2-6, and 6-12. Maintenance of high scores on Positive motivation was associated with higher BMI and more disturbed eating habits. Early reductions in Negative motivation were greater for those starting treatment with higher weight and more disturbed eating habits, but less depression and stress, while later reductions in Negative motivation were predicted by improvements in eating habits, weight, stress and perfectionism. Clinicians treating obesity should be sensitive to fluctuations in both motivational dimensions, as they are likely to play a central role in determining long-term behavior and weight change. Copyright © 2011 Elsevier Ltd. All rights reserved.

Nonlinear control of ships minimizing the position tracking errors

Directory of Open Access Journals (Sweden)

Svein P. Berge

1999-07-01

Full Text Available In this paper, a nonlinear tracking controller with integral action for ships is presented. The controller is based on state feedback linearization. Exponential convergence of the vessel-fixed position and velocity errors are proven by using Lyapunov stability theory. Since we only have two control devices, a rudder and a propeller, we choose to control the longship and the sideship position errors to zero while the heading is stabilized indirectly. A Virtual Reference Point (VRP is defined at the bow or ahead of the ship. The VRP is used for tracking control. It is shown that the distance from the center of rotation to the VRP will influence on the stability of the zero dynamics. By selecting the VRP at the bow or even ahead of the bow, the damping in yaw can be increased and the zero dynamics is stabilized. Hence, the heading angle will be less sensitive to wind, currents and waves. The control law is simulated by using a nonlinear model of the Japanese training ship Shiojimaru with excellent results. Wind forces are added to demonstrate the robustness and performance of the integral controller.

Robust Operation of Tendon-Driven Robot Fingers Using Force and Position-Based Control Laws

Science.gov (United States)

Abdallah, Muhammad E (Inventor); Platt, Jr., Robert J. (Inventor); Reiland, Matthew J (Inventor); Hargrave, Brian (Inventor); Diftler, Myron A (Inventor); Strawser, Philip A (Inventor); Ihrke, Chris A. (Inventor)

2013-01-01

A robotic system includes a tendon-driven finger and a control system. The system controls the finger via a force-based control law when a tension sensor is available, and via a position-based control law when a sensor is not available. Multiple tendons may each have a corresponding sensor. The system selectively injects a compliance value into the position-based control law when only some sensors are available. A control system includes a host machine and a non-transitory computer-readable medium having a control process, which is executed by the host machine to control the finger via the force- or position-based control law. A method for controlling the finger includes determining the availability of a tension sensor(s), and selectively controlling the finger, using the control system, via the force or position-based control law. The position control law allows the control system to resist disturbances while nominally maintaining the initial state of internal tendon tensions.

How do 5-year-olds understand questions?

DEFF Research Database (Denmark)

Sauerland, Uli; Grohmann, Kleanthes; Teresa Guasti, Maria

2016-01-01

developing children across 19 European countries, 18 different languages, and 7 language (sub-)families. The study investigated the effects of two factors on question formation: (a) whether the question contains a simple interrogative word like ‘who’ or a complex one like ‘which princess’, and (b) whether......The comprehension of constituent questions is an important topic for language acquisition research and for applications in the diagnosis of language impairment. This article presents the results of a study investigating the comprehension of different types of questions by 5-year-old, typically...... the question word was related to the sentential subject or object position of the verb. The findings show that there is considerable variation among languages, but the two factors mentioned consistently affect children’s performance. The cross-linguistic variation shows that three linguistic factors facilitate...

Pneumatic Rotary Actuator Position Servo System Based on ADE-PD Control

Directory of Open Access Journals (Sweden)

Yeming Zhang

2018-03-01

Full Text Available In order to accurately control the rotation position of a pneumatic rotary actuator, the flow state of the gas and the motion state of the pneumatic rotary actuator in the pneumatic rotary actuator position servo system are analyzed in this paper. The mathematical model of the system and the experiment platform are established after that. An Adaptive Differential Evolution (ADE algorithm which adaptively ameliorates the scaling factor and crossover probability in the process of individual evolution is proposed and applied to the parameter optimization of PD controller. The experimental platform is used to compare the controller with Differential Evolution (DE algorithm and NCD-PID controller. Finally, the characteristics of the system are tested by increasing the inertial load. The experimental results illustrate that system using ADE-PD control strategy has greater position precision and faster response than using DE-PD and NCD-PID strategies, and shows great robustness.

Randomized controlled trials in evidence-based mental health care: getting the right answer to the right question.

Science.gov (United States)

Essock, Susan M; Drake, Robert E; Frank, Richard G; McGuire, Thomas G

2003-01-01

The purpose of clinical research is to answer this question: Would a new treatment, when added to the existing range of treatment options available in practice, help patients? Randomized controlled trials (RCTs)--in particular, double-blind RCTs--have important methodological advantages over observational studies for addressing this question. These advantages, however, come at a price. RCTs compare treatments using a particular allocation rule for assigning patients to treatments (random assignment) that does not mimic real-world practice. "Favorable" results from an RCT indicating that a new treatment is superior to existing treatments are neither necessary nor sufficient for establishing a "yes" answer to the question posed above. Modeled on an experimental design, RCTs are expensive in time and money and must compare simple differences in treatments. Findings have a high internal validity but may not address the needs of the field, particularly where treatment is complex and rapidly evolving. Design of clinical research needs to take account of the way treatments are allocated in actual practice and include flexible designs to answer important questions most effectively.

RODMOD: a code for control rod positioning

International Nuclear Information System (INIS)

Vondy, D.R.; Fowler, T.B.

1978-11-01

The report documents a computer code which has been implemented to position control rods according to a prescribed schedule during the calculation of a reactor history. Control rods may be represented explicitly with or without internal black absorber conditions in selected energy groups, or fractional insertion may be done, or both, in a problem. There is provision for control rod follower, movement of materials through a series of zones in a closed loop, and shutdown rod insertion and subsequent removal to allow the reactor history calculation to be continued. This code is incorporated in the system containing the VENTURE diffusion theory neutronics and the BURNER exposure codes for routine use. The implemented automated procedures cause the prescribed control rod insertion schedule to be applied without the access of additional user input data during the calculation of a reactor operating history

Tool position tracking control of a nonlinear uncertain flexible robot ...

Indian Academy of Sciences (India)

Robot manipulators have become progressively important in the field of flexible ... this research, tracking of tool position and minimization of motor torque are ...... and Menhaj M B 2013a Position and current control of a permanent-magnet syn-.

Just-in-time information improved decision-making in primary care: a randomized controlled trial.

Directory of Open Access Journals (Sweden)

Jessie McGowan

Full Text Available BACKGROUND: The "Just-in-time Information" (JIT librarian consultation service was designed to provide rapid information to answer primary care clinical questions during patient hours. This study evaluated whether information provided by librarians to answer clinical questions positively impacted time, decision-making, cost savings and satisfaction. METHODS AND FINDING: A randomized controlled trial (RCT was conducted between October 2005 and April 2006. A total of 1,889 questions were sent to the service by 88 participants. The object of the randomization was a clinical question. Each participant had clinical questions randomly allocated to both intervention (librarian information and control (no librarian information groups. Participants were trained to send clinical questions via a hand-held device. The impact of the information provided by the service (or not provided by the service, additional resources and time required for both groups was assessed using a survey sent 24 hours after a question was submitted. The average time for JIT librarians to respond to all questions was 13.68 minutes/question (95% CI, 13.38 to 13.98. The average time for participants to respond their control questions was 20.29 minutes/question (95% CI, 18.72 to 21.86. Using an impact assessment scale rating cognitive impact, participants rated 62.9% of information provided to intervention group questions as having a highly positive cognitive impact. They rated 14.8% of their own answers to control question as having a highly positive cognitive impact, 44.9% has having a negative cognitive impact, and 24.8% with no cognitive impact at all. In an exit survey measuring satisfaction, 86% (62/72 responses of participants scored the service as having a positive impact on care and 72% (52/72 indicated that they would use the service frequently if it were continued. CONCLUSIONS: In this study, providing timely information to clinical questions had a highly positive impact on

Just-in-time information improved decision-making in primary care: a randomized controlled trial.

Science.gov (United States)

McGowan, Jessie; Hogg, William; Campbell, Craig; Rowan, Margo

2008-01-01

The "Just-in-time Information" (JIT) librarian consultation service was designed to provide rapid information to answer primary care clinical questions during patient hours. This study evaluated whether information provided by librarians to answer clinical questions positively impacted time, decision-making, cost savings and satisfaction. A randomized controlled trial (RCT) was conducted between October 2005 and April 2006. A total of 1,889 questions were sent to the service by 88 participants. The object of the randomization was a clinical question. Each participant had clinical questions randomly allocated to both intervention (librarian information) and control (no librarian information) groups. Participants were trained to send clinical questions via a hand-held device. The impact of the information provided by the service (or not provided by the service), additional resources and time required for both groups was assessed using a survey sent 24 hours after a question was submitted. The average time for JIT librarians to respond to all questions was 13.68 minutes/question (95% CI, 13.38 to 13.98). The average time for participants to respond their control questions was 20.29 minutes/question (95% CI, 18.72 to 21.86). Using an impact assessment scale rating cognitive impact, participants rated 62.9% of information provided to intervention group questions as having a highly positive cognitive impact. They rated 14.8% of their own answers to control question as having a highly positive cognitive impact, 44.9% has having a negative cognitive impact, and 24.8% with no cognitive impact at all. In an exit survey measuring satisfaction, 86% (62/72 responses) of participants scored the service as having a positive impact on care and 72% (52/72) indicated that they would use the service frequently if it were continued. In this study, providing timely information to clinical questions had a highly positive impact on decision-making and a high approval rating from

Plasma position control in a tokamak reactor around ignition

International Nuclear Information System (INIS)

Carretta, U.; Minardi, E.; Bacelli, N.

1986-01-01

Plasma position control in a tokamak reactor in the phase approaching ignition is closely related to burn control. If ignited burn corresponds to a thermally unstable situation the plasma becomes sensitive to the thermal instability already in the phase when ignition is approached so that the trajectory in the position-pressure (R,p) space becomes effectively unpredictable. For example, schemes involving closed cycles around ignition can be unstable in the heating-cooling phases, and the deviations may be cumulative in time. Reliable plasma control in pressure-position (p, R) space is achieved by beforehand constraining the p, R trajectory rigidly with suitable feedback vertical field stabilization, which is to be established already below ignition. A scheme in which ignition is approached in a stable and automatic way by feedback stabilization on the vertical field is proposed and studied in detail. The values of the gain coefficient ensuring stabilization and the associated p and R excursions are discussed both analytically, with a 0-D approximation including non-linear effects, and numerically with a 1-D code in cylindrical geometry. Profile effects increase the excursions, in particular above ignition. (author)

Magnetic sensorless control of plasma position and shape in a tokamak

International Nuclear Information System (INIS)

Nakamura, K.; Luo, J.R.; Wang, H.Z.

2005-01-01

Magnetic sensorless sensing and control experiments of the plasma horizontal position have been carried out in the superconducting tokamak HT-7. The sensing is made focusing on the ripple frequency component of the power supply with thyristor and directly from them without time integration. There is no drift problem of integrator of magnetic sensors. Two kinds of control experiments were carried out, to keep the position constant and swing the position in a triangular waveform. And magnetic sensorless sensing of plasma shape is discussed. (author)

Research of Control Strategy in the Large Electric Cylinder Position Servo System

Directory of Open Access Journals (Sweden)

Yongguang Liu

2015-01-01

Full Text Available An ideal positioning response is very difficult to realize in the large electric cylinder system that is applied in missile launcher because of the presence of many nonlinear factors such as load disturbance, parameter variations, lost motion, and friction. This paper presents a piecewise control strategy based on the optimized positioning principle. The combined application of position interpolation method and modified incremental PID with dead band is proposed and applied into control system. The experimental result confirms that this combined control strategy is not only simple to be applied into high accuracy real-time control system but also significantly improves dynamic response, steady accuracy, and anti-interference performance, which has very important significance to improve the smooth control of the large electric cylinder.

Design and performance analysis of position-based impedance control for an electrohydrostatic actuation system

Directory of Open Access Journals (Sweden)

Yongling FU

2018-03-01

Full Text Available Electrohydrostatic actuator (EHA is a type of power-by-wire actuator that is widely implemented in the aerospace industry for flight control, landing gears, thrust reversers, thrust vector control, and space robots. This paper presents the development and evaluation of position-based impedance control (PBIC for an EHA. Impedance control provides the actuator with compliance and facilitates the interaction with the environment. Most impedance control applications utilize electrical or valve-controlled hydraulic actuators, whereas this work realizes impedance control via a compact and efficient EHA. The structures of the EHA and PBIC are firstly introduced. A mathematical model of the actuation system is established, and values of its coefficients are identified by particle swarm optimization. This model facilitates the development of a position controller and the selection of target impedance parameters. A nonlinear proportional-integral position controller is developed for the EHA to achieve the accurate positioning requirement of PBIC. The controller compensates for the adverse effect of stiction, and a position accuracy of 0.08 mm is attained. Various experimental results are presented to verify the applicability of PBIC to the EHA. The compliance of the actuator is demonstrated in an impact test. Keywords: Actuation system, Aerospace, Electrohydrostatic actuator, Force control, Nonlinear dynamics, Particle swarm optimization, Position control

On the positivity of Riemann–Stieltjes integrals

DEFF Research Database (Denmark)

Lukkarinen, Jani; Pakkanen, Mikko S.

2013-01-01

We study the question whether a Riemann–Stieltjes integral of a positive continuous function with respect to a nonnegative function of bounded variation is positive.......We study the question whether a Riemann–Stieltjes integral of a positive continuous function with respect to a nonnegative function of bounded variation is positive....

Position and Attitude Alternate of Path Tracking Heading Control

Directory of Open Access Journals (Sweden)

Baocheng Tan

2014-03-01

Full Text Available The path tracking control algorithm is one of the key problems in the control system design of autonomous vehicle. In this paper, we have conducted dynamic modeling for autonomous vehicle, the relationship between course deviation and yaw rate and centroid deflection angle. From the angle of the dynamics and geometrical, this paper have described the path tracking problem, analyzed the emergence of the eight autonomous vehicles pose binding - position and attitude alternate control methods to identify the relationship between posture and the controlling variables, and design a controller, the experimental results verify the feasibility and effectiveness of this control method.

A modern automatic Carriage-Trolley Position Control System for Dhruva fuelling machine

International Nuclear Information System (INIS)

Agrawal, Ankit; Hari Balakrishna; Narvekar, J.P.; Sanadhya, Vivek

2014-01-01

A fully automatic absolute encoder based position control system has been designed developed implemented and commissioned for the Dhruva Fuelling Machine A (FM/A). This supports both the coarse and fine positioning modes. Provision for fully manual positioning as a standby system has been retained. This system replaces the ageing peg counting based incremental positioner used briefly during the early period after the Dhruva FM/A was commissioned. The older system suffered from peg detection skipping problems; hence it was not being used. Only full manual positioning was being carried out. This paper describes the automatic Carriage Trolley Position Control System (CTPCS). (author)

Positive Psychology: Positive Emotions and Emotional Intelegence

OpenAIRE

Miloseva, Lence

2008-01-01

The paper focuses on the and emotional intelligence. We try to answer on some questions regarding the role which positive emotions have in our life’s. The broaden-and-build theory (Fredrickson, 1998; 2001) predicts that positive emotions are useful in several ways. They guide present behavior, by broadening one’s attention and cognition, setting the stage for creative, explorative, and innovative pursuits. As well, positive emotions build personal and social resources to help individuals achi...

Questioning Questions: Elementary Teachers' Adaptations of Investigation Questions across the Inquiry Continuum

Science.gov (United States)

Biggers, Mandy

2018-01-01

Questioning is a central practice in science classrooms. However, not every question translates into a "good" science investigation. Questions that drive science investigations can be provided by many sources including the teacher, the curriculum, or the student. The variations in the source of investigation questions were explored in…

Management of Adult Syphilis: Key Questions to Inform the 2015 Centers for Disease Control and Prevention Sexually Transmitted Diseases Treatment Guidelines.

Science.gov (United States)

Ghanem, Khalil G

2015-12-15

A panel of experts generated 8 "key questions" in the management of adult syphilis. A systematic literature review was conducted and tables of evidence were constructed to answer these important questions. Penicillin is the drug of choice to treat syphilis. Doxycycline to treat early and late latent syphilis is an acceptable alternate option if penicillin cannot be used. There is no added benefit to enhanced antimicrobial therapy when treating human immunodeficiency virus-infected persons with syphilis. If a patient misses a dose of penicillin in a course of weekly therapy for late syphilis, clinical experience suggests that an interval of 10-14 days between doses might be acceptable before restarting the sequence of injections. Pharmacologic considerations suggest that an interval of 7-9 days between doses, if feasible, may be more optimal. Missed doses are not acceptable for pregnant women. A cerebrospinal fluid examination to diagnose neurosyphilis is recommended in persons diagnosed with tertiary syphilis (eg, cardiovascular syphilis or late benign syphilis), persons with neurological signs or symptoms consistent with neurosyphilis, and asymptomatic persons whose serological titers do not decline appropriately following recommended therapy and in whom reinfection is ruled out. Infection and reinfection rates, particularly among men who have sex with men, are high. Frequent serological screening of this population appears to be the most cost-efficient intervention. The Centers for Disease Control and Prevention continues to recommend the use of the traditional rapid plasma reagin-based screening algorithm. The positive predictive value for syphilis associated with an isolated unconfirmed reactive treponemal chemiluminescence assay or enzyme immunoassay is low if the epidemiological risk and clinical probability for syphilis are low. Among pregnant women with serodiscordant serologies (positive treponemal tests and a negative nontreponemal test), the risk of

A randomized controlled trial of positioning treatments in infants with positional head shape deformities.

Science.gov (United States)

Hutchison, B Lynne; Stewart, Alistair W; De Chalain, Tristan B; Mitchell, Edwin A

2010-10-01

Randomized controlled trials of treatment for deformational plagiocephaly and brachycephaly have been lacking in the literature. Infants (n = 126) presenting to a plagiocephaly clinic were randomized to either positioning strategies or to positioning plus the use of a Safe T Sleep™ positioning wrap. Head shape was measured using a digital photographic technique, and neck function was assessed. They were followed up at home 3, 6 and 12 months later. There was no difference in head shape outcomes for the two treatment groups after 12 months of follow-up, with 42% of infants having head shapes in the normal range by that time. Eighty per cent of children showed good improvement. Those that had poor improvement were more likely to have both plagiocephaly and brachycephaly and to have presented later to clinic. Most infants improved over the 12-month study period, although the use of a sleep positioning wrap did not increase the rate of improvement. © 2010 The Author(s)/Journal Compilation © 2010 Foundation Acta Paediatrica.

Improved Position Sensor for Feedback Control of Levitation

Science.gov (United States)

Hyers, Robert; Savage, Larry; Rogers, Jan

2004-01-01

An improved optoelectronic apparatus has been developed to provide the position feedback needed for controlling the levitation subsystem of a containerless-processing system. As explained, the advantage of this apparatus over prior optoelectronic apparatuses that have served this purpose stems from the use of an incandescent lamp, instead of a laser, to illuminate the levitated object. In containerless processing, a small object to be processed is levitated (e.g., by use of a microwave, low-frequency electromagnetic, electrostatic, or acoustic field) so that it is not in contact with the wall of the processing chamber or with any other solid object during processing. In the case of electrostatic or low-frequency electromagnetic levitation, real-time measurement of the displacement of the levitated object from its nominal levitation position along the vertical axis (and, in some cases, along one or two horizontal axes) is needed for feedback control of the levitating field.

Automatic beam position control at Los Alamos Spallation Radiation Effects Facility (LASREF)

International Nuclear Information System (INIS)

Oothoudt, M.; Pillai, C.; Zumbro, M.

1997-01-01

Historically the Los Alamos Spallation Radiation Effects Facility (LASREF) has used manual methods to control the position of the 800 kW, 800 MeV proton beam on targets. New experiments, however, require more stringent position control more frequently than can be done manually for long periods of time. Data from an existing harp is used to automatically adjust steering magnets to maintain beam position to required tolerances

Sensory systems for a control rod position using reed switches for the integral reactor

International Nuclear Information System (INIS)

Yu, J. Y.; Choi, S.; Kim, J. H.; Lee, D. J.

2007-01-01

The system-integrated modular advanced reactor (SMART) currently under development at the Korea Atomic Energy Research Institute is being designed with a soluble boron free operation and the use of nuclear heating for the reactor start-up. These design features require a Control Element Drive Mechanism (CEDM) for the SMART to have a fine-step movement capability as well as a high reliability for a fine reactivity control. Also the reliability and accuracy of the information for the control rod position is very important to the reactor safety as well as the design of the core protection system. The position indicator is classified as a Class 1E component because the rod position signal of the position indicator is used in the safety related systems. Therefore it will be separated from the control systems to the extent that a failure of any single control system component of a channel and shall have sufficient independence, redundancy, and testability to perform its safety functions assuming a single failure. The position indicator is composed of a permanent magnet, reed switches and a voltage divider. Four independent position indicators around the upper pressure housing provide an indication of the position of a control rod comprising of a permanent magnet with a magnetic field concentrator which moves with the extension shaft connected to the control rod. The zigzag arranged reed switches are positioned along a line parallel to the path of the movement of the permanent magnet and it is activated selectively when the permanent magnet passes by. A voltage divider electrically connected to the reed switches provides a signal commensurate with the position of the control rod. The signal may then be transmitted to a position indicating device. In order to monitor the operating condition of the rotary step motor of CEDM, the angular position detector was installed at the top of the rotary step motor by means of connecting between the planetary gear and the rotating

Positive and Negative Perfectionism in Migrainus Patients Compaired with Control Group

Directory of Open Access Journals (Sweden)

H Afshar

2008-01-01

Full Text Available ABSTRACT: Introduction & Objective: The positive and negative effects of perfectionism on human cognition, affection and behavior have been emphasized. Perfectionism has been conceptualized as a multidimensional construct, with both adaptive and maladaptive aspects, which is one of the common personality traits that cause lifelong stress in human and results in anxiety, depression and physical and mental distress.The aim of this study was to assess the positive and negative perfectionism in migrainus patients in comparison with control group. Materials & Methods: This is an analytical (Case-control study which was performed on 91 migraine patients and 88 healthy individuals. The pqtients and controls completed a standard 40 item questionnaire for perfectionism – PANPS (20 for positive and 20 for negative perfectionism . The patients in both groups were matched for gender and age. Mean of positive and negative perfectionism scores for two groups was statistically analysed using SPSS software. Results: Mean positive perfectionism score was 83.47±8.5 for migraine group and 65.47±7.54 for control group (p=0.0001. The difference between two groups was significant. Mean of negative perfectionism score was 74.12±10.6 for migraine group and 51.79±7.8 for control group(p=0.0001. Conclusion: The results show that migraine patients have higher mean of perfectionism scores than healthy individuals. Based on this study and other clinical experiences more attention to psychotherapy is necessary for better management of migraine and recognition of personality profile in migraine patient helps to reduce patient’s complaints.

Nonlinear control of marine vehicles using only position and attitude measurements

Energy Technology Data Exchange (ETDEWEB)

Paulsen, Marit Johanne

1996-12-31

This thesis presents new results on the design and analysis of nonlinear output feedback controllers for auto pilots and dynamic positioning systems for ships and underwater vehicles. Only position and attitude measurements of the vehicle are used in the control design. The underlying idea of the work is to use certain structural properties of the equations of motion in the controller design and analysis. New controllers for regulation and tracking have been developed and the stability of the resulting closed-loop systems has been rigorously established. The results are supported by simulations. The following problems have been investigated covering design of passive controller for regulation, comparison of two auto pilots, nonlinear damping compensation for tracking, tracking control for nonlinear ships, and output tracking control with wave filtering for multivariable models of possibly unstable vehicles. 97 refs., 32 figs.

Ten Questions about Emergence

OpenAIRE

Fromm, Jochen

2005-01-01

Self-Organization is of growing importance for large distributed computing systems. In these systems, a central control and manual management is exceedingly difficult or even impossible. Emergence is widely recognized as the core principle behind self-organization. Therefore the idea to use both principles to control and organize large-scale distributed systems is very attractive and not so far off. Yet there are many open questions about emergence and self-organization, ranging from a clear ...

Strategies for the plasma position and shape control in IGNITOR

International Nuclear Information System (INIS)

Ramogida, G.; Alladio, F.; Albanese, R.

2006-01-01

The control of the plasma position and shape is a crucial issue in IGNITOR as in every compact, high field, elongated tokamak. The capability of the Poloidal Field Coil system, as presently designed, to provide an effective vertical stabilization of the plasma has been investigated using the CREATE L response model [R. Albanese, F. Villone, '' The Linearized CREATE L Plasma Response Model for the Control of Current, Position and Shape in Tokamaks '', Nucl. Fus., vol. 38, p. 723 (1998)]. This linearized MHD model assumes an axisymmetric deformable plasma described by few global parameters. An optimization of the vertical position control strategy has been carried out and the most effective coil combination has been selected to stabilize the plasma while fulfilling engineering constraints on the coils and minimizing the required power and voltage. The two pairs of coils selected for the vertical control will be fed up with up-down anti-symmetric currents provided by a dedicated supply and overlapped to the scenario currents. The growth rate of the vertical instability and the power required by the active stabilization system have been estimated with this model, indicating that it is possible to design a control system able to guarantee a stability region that includes the most interesting operation conditions. An assessment of the requirements for the plasma cross section shape control has been carried out considering independent perturbations of the plasma global parameters as disturbances and showing that the undesired shape modification rejection is possible with the present PFC and power supply system. The PF coils have been ranked with respect to their capability to restore the shape modifications due to different plasma disturbances and the most effective coil combination, that minimizes recovery time and voltage required, has been selected. In order to have additional means to monitor and control the centre of the plasma column, under demanding conditions

a positive control plasmid for reporter gene assay

African Journals Online (AJOL)

STORAGESEVER

2008-07-04

Jul 4, 2008 ... qualification as a positive control for luciferase reporter gene assays. Key words: Reporter gene plasmid, luciferase assay, cytomegalovirus promoter/enhancer, human melanoma cell line. INTRODUCTION. Reporter genes, often called reporters, have become a precious tool in studies of gene expression ...

Rhetorical questions or rhetorical uses of questions?

Directory of Open Access Journals (Sweden)

Špago Džemal

2016-12-01

Full Text Available This paper aims to explore whether some rhetorical questions contain certain linguistic elements or forms which would differentiate them from answer-eliciting and action-eliciting questions, and thereby hint at their rhetorical nature even outside the context. Namely, despite the fact that the same questions can be rhetorical in one context, and answer-eliciting in another, some of them are more likely to be associated with rhetorical or non-rhetorical use. The analysis is based on extensive data (over 1200 examples of rhetorical questions taken from 30 plays by two British and two American writers, and the results are expected to give an insight into whether we can talk about rhetorical questions or just a rhetorical use of questions.

The control system position to the electric probe in the Tokamak Novillo

International Nuclear Information System (INIS)

Sanchez Garcia, A.M.

1993-01-01

The electric probe are used to determine the parameters of electronic temperatures, the electron density and the plasma potential in Tokamak machines. On this machines the electric probes are used only in the plasma edge due to the intensive flow of high energy particles. This is the region in which the plasma density and temperature are relatively low. It is showed, in this work, the design and construction of an electro mechanic system which is used to control the position of the probe into the discharge chamber. This system is called T he control system position to the electric probe in the tokamak Novillo . This controller is a minimum system that is in charge , by a programming, to rule a step motor by a logic sequence commutation. This is done with the purpose of slide the probe in a radial way with a milli metric precision into the discharge chamber. To this purpose it is used a step motor, due it is principal characteristic is the control of the end element position without a feedback needing of the wrong signal. The system function consist on reading, through a board, the corresponding data to the position where it is wanted to place the probe, it also displays by a numeric indicator the position in which the probe is located (in an interval from 0 to 100 mm), and provide the logic sequence commutation for the step motor. The minimum system is constituted by the micro controller 8748-8 that gives with all precision the control of the electric probe position in the Tokamak Novillo, by programming, associated circuits, amplification unit bi phase unipolar and switching power (they supply the power to the control circuit and to the step motor too), avoiding the destruction of the electric probe. (Author). 17 refs, 29 figs

Diagnosis and Fault-Tolerant Control for Thruster-Assisted Position Mooring System

DEFF Research Database (Denmark)

Nguyen, Trong Dong; Blanke, Mogens; Sørensen, Asgeir

2007-01-01

Development of fault-tolerant control systems is crucial to maintain safe operation of o®shore installations. The objective of this paper is to develop a fault- tolerant control for thruster-assisted position mooring (PM) system with faults occurring in the mooring lines. Faults in line......'s pretension or line breaks will degrade the performance of the positioning of the vessel. Faults will be detected and isolated through a fault diagnosis procedure. When faults are detected, they can be accommodated through the control action in which only parameter of the controlled plant has to be updated...... to cope with the faulty condition. Simulations will be carried out to verify the advantages of the fault-tolerant control strategy for the PM system....

Critical element study on autonomous position control of articulated-arm type manipulator

International Nuclear Information System (INIS)

Oka, Kiyoshi; Kakudate, Satoshi; Nakahira, Masataka

1994-10-01

An articulated-arm type manipulator can be operated effectively in a restricted space due to its flexibility and it can be attractive for a wide range of in-vessel maintenance such as viewing, inspection and limiter handling in fusion experimental reactors. In case of the in-vessel maintenance using a flexible manipulator, it is quite essential to develop an autonomous control method for compensating a deflection of manipulator so as to minimize the maintenance time with high precision. For this purpose, a new position control method using a combination of neural network predictor with a rigid inverse kinematics is being developed. The key features of this method are to simplify a kinematics modeling of flexible manipulator, to enable quick position compensation in stead of ordinary large matrix compensation, and to be applicable to a wide variety of manipulator characteristics. A sub-scaled model of flexible manipulator with 4 joints has been fabricated for a benchmark experiments of the autonomous position control. Comparing analytical simulation with experiments using the flexible manipulator, it has been demonstrated that the new position control method gives significant improvement in control performance with high precision in order of a figure. In addition, further optimization can be possible by adding other non-linear predictors such as radial basis function and fuzzy modeling. This paper describes the details of a sub-scaled flexible manipulator and a neural network position control system as well as results of analytical simulation and benchmark experiments. (author)

A Position Sensorless Control Method for SRM Based on Variation of Phase Inductance

Science.gov (United States)

Komatsuzaki, Akitomo; Miki, Ichiro

Switched reluctance motor (SRM) drives are suitable for variable speed industrial applications because of the simple structure and high-speed capability. However, it is necessary to detect the rotor position with a position sensor attached to the motor shaft. The use of the sensor increases the cost of the drive system and machine size, and furthermore the reliability of the system is reduced. Therefore, several approaches to eliminate the position sensor have already been reported. In this paper, a position sensorless control method based on the variation of the phase inductance is described. The phase inductance regularly varies with the rotor position. The SRM is controlled without the position sensor using the de-fluxing period and the phase inductance. The turn-off timing is determined by computing the difference of angle between the sampling point and the aligned point and the variation of angle during the de-fluxing period. In the magnetic saturation region, the phase inductance at the current when the effect of the saturation starts is computed and the sensorless control can be carried out using this inductance. Experimental results show that the SRM is well controlled without the position sensor using the proposed method.

Position Control of Pneumatic Actuator Using Self-Regulation Nonlinear PID

Directory of Open Access Journals (Sweden)

Syed Najib Syed Salim

2014-01-01

Full Text Available The enhancement of nonlinear PID (N-PID controller for a pneumatic positioning system is proposed to improve the performance of this controller. This is executed by utilizing the characteristic of rate variation of the nonlinear gain that is readily available in N-PID controller. The proposed equation, namely, self-regulation nonlinear function (SNF, is used to reprocess the error signal with the purpose of generating the value of the rate variation, continuously. With the addition of this function, a new self-regulation nonlinear PID (SN-PID controller is proposed. The proposed controller is then implemented to a variably loaded pneumatic actuator. Simulation and experimental tests are conducted with different inputs, namely, step, multistep, and random waveforms, to evaluate the performance of the proposed technique. The results obtained have been proven as a novel initiative at examining and identifying the characteristic based on a new proposal controller resulting from N-PID controller. The transient response is improved by a factor of 2.2 times greater than previous N-PID technique. Moreover, the performance of pneumatic positioning system is remarkably good under various loads.

Question Inventory on Tobacco (QIT)

Data.gov (United States)

U.S. Department of Health & Human Services — 1965, 1966, 1970, 1974-2017. Centers for Disease Control and Prevention (CDC). Office on Smoking and Health (OSH). Tobacco-Related Survey Questions. The QIT is a...

Positioning and tracking control system analysis for mobile free space optical network

Science.gov (United States)

Li, Yushan; Refai, Hazem; Sluss, , James J., Jr.; Verma, Pramode; LoPresti, Peter

2005-08-01

Free Space Optical (FSO) communication has evolved to be applied to the mobile network, because it can provide up to 2.5Gbps or higher data rate wireless communication. One of the key challenges with FSO systems is to maintain the Line of Sight (LOS) between transmitter and receiver. In this paper, the feasibility and performance of applying the FSO technology to the mobile network is explored, and the design plan of the attitude positioning and tracking control system of the FSO transceiver is investigated. First, the system architecture is introduced, the requirements for the control system are analyzed, the involved reference frames and frame transformation are presented. Second, the control system bandwidth is used to evaluate the system performance in controlling a positioning system consisting of a gimbal and a steering mirror, some definitions to describe the positioning accuracy and tracking capacity are given. The attitude control of a FSO transceiver is split into 2 similar channels: pitch and yaw. Using an equivalent linear control system model, the simulations are carried out, with and without the presence of uncertainties that includes GPS data errors and sensor measurement errors. Finally, based on the simulation results in the pitch channel, the quantitative evaluation on the performance of the control system is given, including positioning accuracy, tracking capability and uncertainty tolerance.

Explicit Generalized Predictive Control of Speed and Position of PMSM Drives

Czech Academy of Sciences Publication Activity Database

Belda, Květoslav; Vošmik, D.

2016-01-01

Roč. 63, č. 6 (2016), s. 3889-3896 ISSN 0278-0046 Institutional support: RVO:67985556 Keywords : current limitation * field weakening * motion control * permanent magnet synchronous motors * position control * predictive control * speed control Subject RIV: BC - Control Systems Theory Impact factor: 7.168, year: 2016 http://library.utia.cas.cz/separaty/2016/AS/belda-0457259.pdf

Hybrid Force and Position Control Strategy of Robonaut Performing Object Transfer Task

Directory of Open Access Journals (Sweden)

Chen Gang

2018-01-01

Full Text Available This paper proposes a coordinated hybrid force/position control strategy of robonaut performing object transfer operation. Firstly, the constraint relationships between robonaut and object are presented. Base on them, the unified dynamic model of the robonaut and object is established to design the hybrid force/position control method. The movement, the internal force and the external constraint force of the object are considered as the control targets of the control system. Finally, a MATLAB simulation of the robonaut performing object transfer task verifies the correctness and effectiveness of the proposed method. The results show that all the targets can be control accurately by using the method proposed in this paper. The presented control method can control both internal and external forces while maintaining control accuracy, which is a common control strategy.

Development of control rod position indicator using seismic-resistance reed switches for integral reactor

International Nuclear Information System (INIS)

Yu, Je Yong; Kim, Ji Ho; Huh, Hyung; Choi, Myoung Hwan; Sohn, Dong Seong

2008-01-01

The Reed Switch Position Transmitter (RSPT) is used as a position indicator for the control rod in commercial nuclear power plants made by ABB-CE. But this position indicator has some problems when directly adopting it to the integral reactor. The Control Element Drive Mechanism (CEDM) for the integral reactor is designed to raise and lower the control rod in steps of 2mm in order to satisfy the design features of the integral reactor which are the soluble boron free operation and the use of a nuclear heating for the reactor start-up. Therefore the resolution of the position indicator for the integral reactor should be achieved to sense the position of the control rod more precisely than that of the RSPT of the ABB-CE. This paper adopts seismic resistance reed switches to the position indicator in order to reduce the damages or impacts during the handling of the position indicator and earthquake

Position Control of a 3-CPU Spherical Parallel Manipulator

Directory of Open Access Journals (Sweden)

Massimo Callegari

2013-01-01

Full Text Available The paper presents the first experimental results on the control of a prototypal robot designed for the orientation of parts or tools. The innovative machine is a spherical parallel manipulator actuated by 3 linear motors; several position control schemes have been tested and compared with the final aim of designing an interaction controller. The relative simplicity of machine kinematics allowed to test algorithms requiring the closed-loop evaluation of both inverse and direct kinematics; the compensation of gravitational terms has been experimented as well.

Boundary mediated position control of traveling waves

Science.gov (United States)

Martens, Steffen; Ziepke, Alexander; Engel, Harald

Reaction control is an essential task in biological systems and chemical process industry. Often, the excitable medium supporting wave propagation exhibits an irregular shape and/or is limited in size. In particular, the analytic treatment of wave phenomena is notoriously difficult due to the spatial modulation of the domain's. Recently, we have provided a first systematic treatment by applying asymptotic perturbation analysis leading to an approximate description that involves a reduction of dimensionality; the 3D RD equation with spatially dependent NFBCs on the reactants reduces to a 1D reaction-diffusion-advection equation. Here, we present a novel method to control the position ϕ (t) of traveling waves in modulated domains according to a prespecified protocol of motion. Given this protocol, the ``optimal'' geometry of reactive domains Q (x) is found as the solution of the perturbatively derived equation of motion. Noteworthy, such a boundary control can be expressed in terms of the uncontrolled wave profile and its propagation velocity, rendering detailed knowledge of the reaction kinetics unnecessary. German Science Foundation DFG through the SFB 910 ''Control of Self-Organizing Nonlinear Systems''.

Close or positive margins after surgical resection for the head and neck cancer patient: the addition of brachytherapy improves local control

International Nuclear Information System (INIS)

Beitler, Jonathan J.; Smith, Richard V.; Silver, Carl E.; Quish, Astrid; Deore, Shivaji M.; Mullokandov, Eduard; Fontenla, Doracy P.; Wadler, Scott; Hayes, Mary Katherine; Vikram, Bhadrasain

1998-01-01

Purpose: Microscopically positive or close margins after surgical resection results in an approximately 21-26% local failure rate despite excellent postoperative external radiation therapy. We sought to demonstrate improved local control in head and neck cancer patients who had a resection with curative intent, and had unexpected, microscopically positive or close surgical margins. Methods and Materials: Twenty-nine patients with microscopically close or positive margins after curative surgery were given definitive, adjuvant external radiation therapy and 125 I brachytherapy. All 29 patients had squamous cell cancer and tonsil was the most common subsite within the head and neck region. After external radiation therapy and thorough discussions with the attending surgeon and pathologists, the slides, gross specimens, and appropriate radiographs were reviewed and a target volume was determined. The target volume was the region of the margin in question and varied in size based on the surgery and pathologic results. Once the target volume was identified the patient was taken back to the operating room for insertion of 125 I seeds. Activity implanted (range 2.9-21.5 millicuries) was designed to administer a cumulative lifetime dose of 120-160 Gy. Results: Twenty-nine patients were followed for a median of 26 months (range 5-86 months). Two-year actuarial local control was 92%. Conclusion: 125 I, after external radiation therapy, is an excellent method to improve local control in the subset of patients with unexpectedly unsatisfactory margins

Maternal sensitivity and latency to positive emotion following challenge: pathways through effortful control.

Science.gov (United States)

Conway, Anne; McDonough, Susan C; Mackenzie, Michael; Miller, Alison; Dayton, Carolyn; Rosenblum, Katherine; Muzik, Maria; Sameroff, Arnold

2014-01-01

The ability to self-generate positive emotions is an important component of emotion regulation. In this study, we focus on children's latency to express positive emotions following challenging situations and assess whether this ability operates through early maternal sensitivity and children's effortful control. Longitudinal relations between maternal sensitivity, infant negative affect, effortful control, and latency to positive emotion following challenge were examined in 156 children who were 33 months of age. Structural equation models supported the hypothesis that maternal sensitivity during infancy predicted better effortful control and, in turn, shorter latencies to positive emotions following challenge at 33 months. Directions for future research are discussed. © 2014 Michigan Association for Infant Mental Health.

Tri-code inductance control rod position indicator with several multi-coding-bars

International Nuclear Information System (INIS)

Shi Jibin; Jiang Yueyuan; Wang Wenran

2004-01-01

A control rod position indicator named as tri-code inductance control rod position indicator with multi-coding-bars, which possesses simple structure, reliable operation and high precision, is developed. The detector of the indicator is composed of K coils, a compensatory coil and K coding bars. Each coding bar consists of several sections of strong magnetic cores, several sections of weak magnetic cores and several sections of non-magnetic portions. As the control rod is withdrawn, the coding bars move in the center of the coils respectively, while the constant alternating current passes the coils and makes them to create inductance alternating voltage signals. The outputs of the coils are picked and processed, and the tri-codes indicating rod position can be gotten. Moreover, the coding principle of the detector and its related structure are introduced. The analysis shows that the indicator owns more advantage over the coils-coding rod position indicator, so it can meet the demands of the rod position indicating in nuclear heating reactor (NHR). (authors)

Can we share questions? Performance of questions from different question banks in a single medical school.

Science.gov (United States)

Freeman, Adrian; Nicholls, Anthony; Ricketts, Chris; Coombes, Lee

2010-01-01

To use progress testing, a large bank of questions is required, particularly when planning to deliver tests over a long period of time. The questions need not only to be of good quality but also balanced in subject coverage across the curriculum to allow appropriate sampling. Hence as well as creating its own questions, an institution could share questions. Both methods allow ownership and structuring of the test appropriate to the educational requirements of the institution. Peninsula Medical School (PMS) has developed a mechanism to validate questions written in house. That mechanism can be adapted to utilise questions from an International question bank International Digital Electronic Access Library (IDEAL) and another UK-based question bank Universities Medical Assessment Partnership (UMAP). These questions have been used in our progress tests and analysed for relative performance. Data are presented to show that questions from differing sources can have comparable performance in a progress testing format. There are difficulties in transferring questions from one institution to another. These include problems of curricula and cultural differences. Whilst many of these difficulties exist, our experience suggests that it only requires a relatively small amount of work to adapt questions from external question banks for effective use. The longitudinal aspect of progress testing (albeit summatively) may allow more flexibility in question usage than single high stakes exams.

Biology Question Generation from a Semantic Network

Science.gov (United States)

Zhang, Lishan

Science instructors need questions for use in exams, homework assignments, class discussions, reviews, and other instructional activities. Textbooks never have enough questions, so instructors must find them from other sources or generate their own questions. In order to supply instructors with biology questions, a semantic network approach was developed for generating open response biology questions. The generated questions were compared to professional authorized questions. To boost students' learning experience, adaptive selection was built on the generated questions. Bayesian Knowledge Tracing was used as embedded assessment of the student's current competence so that a suitable question could be selected based on the student's previous performance. A between-subjects experiment with 42 participants was performed, where half of the participants studied with adaptive selected questions and the rest studied with mal-adaptive order of questions. Both groups significantly improved their test scores, and the participants in adaptive group registered larger learning gains than participants in the control group. To explore the possibility of generating rich instructional feedback for machine-generated questions, a question-paragraph mapping task was identified. Given a set of questions and a list of paragraphs for a textbook, the goal of the task was to map the related paragraphs to each question. An algorithm was developed whose performance was comparable to human annotators. A multiple-choice question with high quality distractors (incorrect answers) can be pedagogically valuable as well as being much easier to grade than open-response questions. Thus, an algorithm was developed to generate good distractors for multiple-choice questions. The machine-generated multiple-choice questions were compared to human-generated questions in terms of three measures: question difficulty, question discrimination and distractor usefulness. By recruiting 200 participants from

Positive emotion, reward, and cognitive control: emotional versus motivational influences

Directory of Open Access Journals (Sweden)

Kimberly Sarah Chiew

2011-10-01

Full Text Available It is becoming increasingly appreciated that affective influences can contribute strongly to goal-oriented cognition and behaviour. However, much work is still needed to properly characterize these influences and the mechanisms by which they contribute to cognitive processing. An important question concerns the nature of emotional manipulations (i.e., direct induction of affectively-valenced subjective experience versus motivational manipulations (e.g., delivery of performance-contingent rewards and punishments and their impact on cognitive control. Empirical evidence suggests that both kinds of manipulations can influence cognitive control in a systematic fashion, but investigations of both have largely been conducted independently of one another. Likewise, some theoretical accounts suggest that emotion and motivation may modulate cognitive control via common neural mechanisms, while others suggest the possibility of dissociable influences. Here, we provide an analysis and synthesis of these various accounts, suggesting potentially fruitful new research directions to test competing hypotheses.

Position feedback control of a nonmagnetic body levitated in magnetic fluid

International Nuclear Information System (INIS)

Lee, J H; Nam, Y J; Park, M K; Yamane, R

2009-01-01

This paper is concerned with the position feedback control of a magnetic fluid actuator which is characterized by the passive levitation of a nonmagnetic body immersed in a magnetic fluid under magnetic fields. First of all, the magnetic fluid actuator is designed based on the ferrohydrostatic relation. After manufacturing the actuator, its static and dynamic characteristics are investigated experimentally. With the aid of the dynamic governing relation obtained experimentally and the proportional-derivative controller, the position tracking control of the actuator is carried out both theoretically and experimentally. As a result, the applicability of the proposed magnetic fluid actuator to various engineering devices is verified.

Position Control of an X4-Flyer Using a Tether

Directory of Open Access Journals (Sweden)

, Keigo Watanabe

2014-10-01

Full Text Available In Japan, aging of infrastructures, such as roads, bridges, and water and sewer services, etc. poses a problem, and it is required to extend the life-span of such infrastructures by maintenance. Among infrastructures, especially bridges are periodically inspected by short range visual observations, which check the damage and deterioration of the surface. However, since there are some cases where the short range visual observation is difficult, an alternative method is required so as to replace the short range visual observation with it. So, "X4-Flyer" is very attractive because of realizing a movement at high altitude easily. The objective of this study is to develop a tethered X4- Flyer, so that the conventional short range visual observation of bridges is replaced by it. In this paper, a method for the measurement and control of the position is described by using a tether for controlling the position of the X4-Flyer. In addition, it is checked whether the tethered X4-Flyer can control the position using the proposed method or not, letting it fly in a state in which a tether is being attached.

Continuous, saturation, and discontinuous tokamak plasma vertical position control systems

Energy Technology Data Exchange (ETDEWEB)

Mitrishkin, Yuri V., E-mail: y_mitrishkin@hotmail.com [M. V. Lomonosov Moscow State University, Faculty of Physics, Moscow 119991 (Russian Federation); Pavlova, Evgeniia A., E-mail: janerigoler@mail.ru [M. V. Lomonosov Moscow State University, Faculty of Physics, Moscow 119991 (Russian Federation); Kuznetsov, Evgenii A., E-mail: ea.kuznetsov@mail.ru [Troitsk Institute for Innovation and Fusion Research, Moscow 142190 (Russian Federation); Gaydamaka, Kirill I., E-mail: k.gaydamaka@gmail.com [V. A. Trapeznikov Institute of Control Sciences of the Russian Academy of Sciences, Moscow 117997 (Russian Federation)

2016-10-15

Highlights: • Robust new linear state feedback control system for tokamak plasma vertical position. • Plasma vertical position relay control system with voltage inverter in sliding mode. • Design of full models of multiphase rectifier and voltage inverter. • First-order unit approximation of full multiphase rectifier model with high accuracy. • Wider range of unstable plant parameters of stable control system with multiphase rectifier. - Abstract: This paper is devoted to the design and comparison of unstable plasma vertical position control systems in the T-15 tokamak with the application of two types of actuators: a multiphase thyristor rectifier and a transistor voltage inverter. An unstable dynamic element obtained by the identification of plasma-physical DINA code was used as the plasma model. The simplest static feedback state space control law was synthesized as a linear combination of signals accessible to physical measurements, namely the plasma vertical displacement, the current, and the voltage in a horizontal field coil, to solve the pole placement problem for a closed-loop system. Only one system distinctive parameter was used to optimize the performance of the feedback system, viz., a multiple real pole. A first-order inertial unit was used as the rectifier model in the feedback. A system with a complete rectifier model was investigated as well. A system with the voltage inverter model and static linear controller was brought into a sliding mode. As this takes place, real time delays were taken into account in the discontinuous voltage inverter model. The comparison of the linear and sliding mode systems showed that the linear system enjoyed an essentially wider range of the plant model parameters where the feedback system was stable.

Continuous, saturation, and discontinuous tokamak plasma vertical position control systems

International Nuclear Information System (INIS)

Mitrishkin, Yuri V.; Pavlova, Evgeniia A.; Kuznetsov, Evgenii A.; Gaydamaka, Kirill I.

2016-01-01

Highlights: • Robust new linear state feedback control system for tokamak plasma vertical position. • Plasma vertical position relay control system with voltage inverter in sliding mode. • Design of full models of multiphase rectifier and voltage inverter. • First-order unit approximation of full multiphase rectifier model with high accuracy. • Wider range of unstable plant parameters of stable control system with multiphase rectifier. - Abstract: This paper is devoted to the design and comparison of unstable plasma vertical position control systems in the T-15 tokamak with the application of two types of actuators: a multiphase thyristor rectifier and a transistor voltage inverter. An unstable dynamic element obtained by the identification of plasma-physical DINA code was used as the plasma model. The simplest static feedback state space control law was synthesized as a linear combination of signals accessible to physical measurements, namely the plasma vertical displacement, the current, and the voltage in a horizontal field coil, to solve the pole placement problem for a closed-loop system. Only one system distinctive parameter was used to optimize the performance of the feedback system, viz., a multiple real pole. A first-order inertial unit was used as the rectifier model in the feedback. A system with a complete rectifier model was investigated as well. A system with the voltage inverter model and static linear controller was brought into a sliding mode. As this takes place, real time delays were taken into account in the discontinuous voltage inverter model. The comparison of the linear and sliding mode systems showed that the linear system enjoyed an essentially wider range of the plant model parameters where the feedback system was stable.

Robust independent modal space control of a coupled nano-positioning piezo-stage

Science.gov (United States)

Zhu, Wei; Yang, Fufeng; Rui, Xiaoting

2018-06-01

In order to accurately control a coupled 3-DOF nano-positioning piezo-stage, this paper designs a hybrid controller. In this controller, a hysteresis observer based on a Bouc-Wen model is established to compensate the hysteresis nonlinearity of the piezoelectric actuator first. Compared to hysteresis compensations using Preisach model and Prandt-Ishlinskii model, the compensation method using the hysteresis observer is computationally lighter. Then, based on the proposed dynamics model, by constructing the modal filter, a robust H∞ independent modal space controller is designed and utilized to decouple the piezo-stage and deal with the unmodeled dynamics, disturbance, and hysteresis compensation error. The effectiveness of the proposed controller is demonstrated experimentally. The experimental results show that the proposed controller can significantly achieve the high-precision positioning.

Development of EPICS based beam-line experimental control employing motor controller for precision positioning

International Nuclear Information System (INIS)

Tuli, Anupriya; Jain, Rajiv; Vora, H.S.

2015-01-01

In a Synchrotron Radiation Source the beamline experiments are carried out in radiation prone environment, inside the hutch, which demands to conduct experiments remotely. These experiments involves instrument control and data acquisition from various devices. Another factor which attributes to system complexity is precise positioning of sample and placement of detectors. A large number of stepper motors are engaged for achieving the required precision positioning. This work is a result of development of Experimental Physics and Industrial Control System (EPICS) based control system to interface a stepper motor controller developed indigenously by Laser Electronics Support Division of RRCAT. EPICS is an internationally accepted open source software environment which follows toolkit approach and standard model paradigm. The operator interface for the control system software was implemented using CSS BOY. The system was successfully tested for Ethernet based remote access. The developed control software comprises of an OPI and alarm handler (EPICS ALH). Both OPI and ALH are linked with PV's defined in database files. The development process resulted into a set of EPICS based commands for controlling stepper motor. These commands are independent of operator interface, i.e. stepper motor can be controlled by using these set of commands directly on EPICS prompt. This command set is illustrated in the above table. EPICS Alarm Handler was also tested independently by running these commands on EPIC prompt. If not using ALH, operator can read the alarm status of a PV using 'SEVR' and 'STAT' attributes. (author)

Accuracy of questions related to allergic contact dermatitis.

Science.gov (United States)

Fleming, C J; Burden, A D; Forsyth, A

2000-12-01

The ability of a physician to select individuals likely to benefit from patch testing depends on his or her ability to interpret responses to enquiries related to contact allergy. The significance of such responses to questions of nickel, fragrance and colophon allergy is unclear. The specificity, sensitivity and predictive value of questions relating to nickel, fragrance and colophony allergy were determined. A total of 258 patients attending for routine patch testing were questioned about skin reactions to nickel, fragrances and Elastoplast (Smith and Nephew Healthcare, Hull, England). All subjects were then patch tested to nickel, fragrance mix, and colophony. Responses to questions were compared with patch test results. The sensitivity of questions relating to nickel, fragrance, and colophony was 82%, 49%, and 71%, respectively. The specificity of the same questions was 77%, 79%, and 90%; the positive predictive value was 54%, 46% and 29%, respectively. After adjustment to include clinical relevance, the sensitivity of nickel questions rose to 100%. These data permit greater understanding of the role of patient history in selection of patients for patch testing. Copyright 2000 by W.B. Saunders Company

Position Control of Switched Reluctance Motor Using Super Twisting Algorithm

Directory of Open Access Journals (Sweden)

Muhammad Rafiq Mufti

2016-01-01

Full Text Available The inherent problem of chattering in traditional sliding mode control is harmful for practical application of control system. This paper pays a considerable attention to a chattering-free control method, that is, higher-order sliding mode (super twisting algorithm. The design of a position controller for switched reluctance motor is presented and its stability is assured using Lyapunov stability theorem. In order to highlight the advantages of higher-order sliding mode controller (HOSMC, a classical first-order sliding mode controller (FOSMC is also applied to the same system and compared. The simulation results reflect the effectiveness of the proposed technique.

Musical Applications and Design Techniques for the Gametrak Tethered Spatial Position Controller

DEFF Research Database (Denmark)

Freed, Adrian; Overholt, Daniel; Hansen, Anne-Marie

2009-01-01

The Gametrak spatial position controller has been saved from the fate of so many discontinued gaming controllers to become an attractive and increasingly popular platform for experimental musical controllers, math and science manipulatives, large scale interactive installations and as a playful...... tangible gaming interface that promotes inter-generational creative play and discovery . After introducing the peculiarities of the GameTrak and comparing it to related spatial position sensing systems we survey musical applications of the device. The short paper format cannot do justice to the depth...

Versão eletrônica de questionário e o controle de erros de resposta Electronic version of a questionnaire and control of answer errors

Directory of Open Access Journals (Sweden)

Sadao Omote

2005-12-01

Full Text Available O artigo relata a análise de erros cometidos em questionário impresso e a aplicabilidade de uma versão eletrônica do mesmo questionário para o controle desses erros. Sessenta estudantes de pós-graduação em Educação responderam à versão eletrônica programada em Visual Basice outros 52 responderam à versão impressa. No questionário impresso, foram cometidos 95 erros, dos quais 28 não invalidam as respostas. Os demais erros podem levar à exclusão dos participantes que os cometeram, se todos os itens forem analisados rigorosamente de acordo com as instruções. Os erros cometidos na versão impressa podem ser controlados na versão eletrônica mediante adequada programação. Nenhuma dificuldade para responder a versão eletrônica foi identificada. As vantagens apontadas pelos respondentes e a possibilidade de controle total dos erros de resposta, aliadas à eliminação de erro de tabulação mediante a inserção automática das respostas em banco de dados, recomendam o uso de versão eletrônica de questionário.The article reports the analysis of errors made in a printed questionnaire and the possibility of using an electronic version of the same questionnaire aiming to control those errors. Sixty Education graduate students answered an electronic version, programmed in Visual Basic, and another 52 answered a printed version. In the printed questionnaire, 95 errors were made of which 28 errors may be ignored. The other errors may cause the exclusion of respondents that made them, if all items were analyzed strictly in agreement with the instructions. The errors made in the printed version may be controlled in an electronic version by means of appropriate programming. No difficulty in answering the electronic version was reported. The advantages pointed out by the respondents and the possibility of total control of answer errors, allied with the elimination of tabulation errors by means of automatic database insertion of the

Eigenvalues of Words in Two Positive Definite Letters

OpenAIRE

Hillar, Christopher J; Johnson, Charles R

2005-01-01

The question of whether all words in two real positive definite letters have only positive eigenvalues is addressed and settled (negatively). This question was raised some time ago in connection with a long-standing problem in theoretical physics. A large class of words that do guarantee positive eigenvalues is identified, and considerable evidence is given for the conjecture that no other words do. In the process, a fundamental question about solvability of symmetric word equations is encoun...

Stability of position control system in JIPP T-II

International Nuclear Information System (INIS)

Sakurai, Keiichi; Tanahashi, Shygo

1980-01-01

Computations and experiments on the stability of a feedback control system for maintaining a plasma column in equilibrium are described. The time response of the displacement of the plasma to the desired position is examined by solving the equation of motion of the plasma column. We show that the stability of the feedback control system is improved by using an additional term which represents the shift velocity of the plasma column. (author)

[Relationship between the prone position and achieving head control at 3 months].

Science.gov (United States)

Pérez-Machado, J L; Rodríguez-Fuentes, G

2013-10-01

Owing to the significant increase of mild motor delays and the strong intolerance of infants to be placed on prone position observed in the Physiotherapy Unit of the Maternal and Children's University Hospital of the Canaries (HUMIC), a study was conducted to determine whether positioning infants in the prone position while awake affected the achievement and quality of head control at three months. A prospective comparative practice-based study of a representative sample of 67 healthy infants born in the HUMIC, and divided into an experimental group (n = 35) and control group (n = 32). The Alberta Infant Motor Scale (AIMS) and a parent questionnaire were used as measurement tools. The intervention consisted of regular home visits to the experimental group (from the first to the third month). The two groups were evaluated in their homes at the end of 3 months. The differences in mean raw score of the AIMS at 3 months were, 16.26 in the experimental group and 10.38 in control group (P<.001). The percentile mean was 94 in the experimental group, and less than 50 (42) in the control group. All of the experimental group babies achieved the head control, with only 8 in the control group (25%). The significant findings suggest a direct relationship between the time spent in the prone position when the baby is awake and the achievement of head control at three months. Copyright © 2012 Asociación Española de Pediatría. Published by Elsevier Espana. All rights reserved.

Do Persian Native Speakers Prosodically Mark Wh-in-situ Questions?

Science.gov (United States)

Shiamizadeh, Zohreh; Caspers, Johanneke; Schiller, Niels O

2018-02-01

It has been shown that prosody contributes to the contrast between declarativity and interrogativity, notably in interrogative utterances lacking lexico-syntactic features of interrogativity. Accordingly, it may be proposed that prosody plays a role in marking wh-in-situ questions in which the interrogativity feature (the wh-phrase) does not move to sentence-initial position, as, for example, in Persian. This paper examines whether prosody distinguishes Persian wh-in-situ questions from declaratives in the absence of the interrogativity feature in the sentence-initial position. To answer this question, a production experiment was designed in which wh-questions and declaratives were elicited from Persian native speakers. On the basis of the results of previous studies, we hypothesize that prosodic features mark wh-in-situ questions as opposed to declaratives at both the local (pre- and post-wh part) and global level (complete sentence). The results of the current study confirm our hypothesis that prosodic correlates mark the pre-wh part as well as the complete sentence in wh-in-situ questions. The results support theoretical concepts such as the frequency code, the universal dichotomous association between relaxation and declarativity on the one hand and tension and interrogativity on the other, the relation between prosody and pragmatics, and the relation between prosody and encoding and decoding of sentence type.

Real-time digital control of plasma position and shape on the TEXTOR tokamak

International Nuclear Information System (INIS)

Mitri, Mikhael

2009-01-01

Beside the objective of contributing to the controlled thermonuclear fusion research and ultimately the development of a fusion based power plant, the main objectives of the thesis are a substantial improvement of plasma vertical position control and plasma shape control as well as a better understanding of formerly unexplained effects, e.g. disturbance fields. As for the vertical position control, a deep analysis has to be undertaken to identify the problem sources. Accurate control of the plasma position is very difficult to achieve. This is mainly due to the complexity of the tokamak and the difficulty in measuring or modelling all relevant discharge variables. Any models would be highly nonlinear and time varying. Thus, for simulation and controller design, a simplified, but nevertheless accurate model has to be developed, based on physics and measured data of the process. Furthermore, the quality of the measured position has to be improved by using new inductive sensors, integrators, and hardware. The integration drift problem has to be analysed and resolved by developing a drift-free integration method. Concerning the shape control, a better understanding of the relation between the stray fields and the iron core saturation is required. Furthermore, the influence on the plasma elongation has to be determined. Upon this, a shape compensation algorithm has to be developed accordingly. The accuracy of the shape control has to be better than 1%. (orig.)

When is a research question not a research question?

Science.gov (United States)

Mayo, Nancy E; Asano, Miho; Barbic, Skye Pamela

2013-06-01

Research is undertaken to answer important questions yet often the question is poorly expressed and lacks information on the population, the exposure or intervention, the comparison, and the outcome. An optimal research question sets out what the investigator wants to know, not what the investigator might do, nor what the results of the study might ultimately contribute. The purpose of this paper is to estimate the extent to which rehabilitation scientists optimally define their research questions. A cross-sectional survey of the rehabilitation research articles published during 2008. Two raters independently rated each question according to pre-specified criteria; a third rater adjudicated all discrepant ratings. The proportion of the 258 articles with a question formulated as methods or expected contribution and not as what knowledge was being sought was 65%; 30% of questions required reworking. The designs which most often had poorly formulated research questions were randomized trials, cross-sectional and measurement studies. Formulating the research question is not purely a semantic concern. When the question is poorly formulated, the design, analysis, sample size calculations, and presentation of results may not be optimal. The gap between research and clinical practice could be bridged by a clear, complete, and informative research question.

Wideband Motion Control by Position and Acceleration Input Based Disturbance Observer

Science.gov (United States)

Irie, Kouhei; Katsura, Seiichiro; Ohishi, Kiyoshi

The disturbance observer can observe and suppress the disturbance torque within its bandwidth. Recent motion systems begin to spread in the society and they are required to have ability to contact with unknown environment. Such a haptic motion requires much wider bandwidth. However, since the conventional disturbance observer attains the acceleration response by the second order derivative of position response, the bandwidth is limited due to the derivative noise. This paper proposes a novel structure of a disturbance observer. The proposed disturbance observer uses an acceleration sensor for enlargement of bandwidth. Generally, the bandwidth of an acceleration sensor is from 1Hz to more than 1kHz. To cover DC range, the conventional position sensor based disturbance observer is integrated. Thus, the performance of the proposed Position and Acceleration input based disturbance observer (PADO) is superior to the conventional one. The PADO is applied to position control (infinity stiffness) and force control (zero stiffness). The numerical and experimental results show viability of the proposed method.

Questions and Questioning Techniques: A View of Indonesian Students’ Preferences

Directory of Open Access Journals (Sweden)

Debora Tri Ragawanti

2009-01-01

Full Text Available This study investigated students’ preference on teacher’s questions and questionings techniques and more importantly on how they could facilitate or impede their learning. The results on teacher’s questioning techniques showed that random nomination was more preferred than pre-arranged format nomination. In addition, techniques of nominating volunteering students and of giving wait-time were disliked by most student-respondents. As for types of question, the yes/no question was favored by most of the respondents. Different from the yes/no question, the number of respondents leaning forward to the analysis question, questions about fact of life, and questions to state opinion did not show a significant difference from the number of those leaning against the same questions.

Hybrid PD and effective multi-mode positive position feedback control for slewing and vibration suppression of a smart flexible manipulator

International Nuclear Information System (INIS)

Lou, Jun-qiang; Wei, Yan-ding; Yang, Yi-ling; Xie, Feng-ran

2015-01-01

A hybrid control strategy for slewing and vibration suppression of a smart flexible manipulator is presented in this paper. It consists of a proportional derivative controller to realize motion control, and an effective multi-mode positive position feedback (EMPPF) controller to suppress the multi-mode vibration. Rather than treat each mode equally as the standard multi-mode PPF, the essence of the EMPPF is that control forces of different modes are applied according to the mode parameters of the respective modes, so the vibration modes with less vibration energy receive fewer control forces. Stability conditions for the close loop system are established through stability analysis. Optimal parameters of the EMPPF controller are obtained using the method of root locus analysis. The performance of the proposed strategy is demonstrated by simulation and experiments. Experimental results show that the first two vibration modes of the manipulator are effectively suppressed. The setting time of the setup descends approximately 55%, reaching 3.12 s from 5.67 s. (paper)

Hybrid PD and effective multi-mode positive position feedback control for slewing and vibration suppression of a smart flexible manipulator

Science.gov (United States)

Lou, Jun-qiang; Wei, Yan-ding; Yang, Yi-ling; Xie, Feng-ran

2015-03-01

A hybrid control strategy for slewing and vibration suppression of a smart flexible manipulator is presented in this paper. It consists of a proportional derivative controller to realize motion control, and an effective multi-mode positive position feedback (EMPPF) controller to suppress the multi-mode vibration. Rather than treat each mode equally as the standard multi-mode PPF, the essence of the EMPPF is that control forces of different modes are applied according to the mode parameters of the respective modes, so the vibration modes with less vibration energy receive fewer control forces. Stability conditions for the close loop system are established through stability analysis. Optimal parameters of the EMPPF controller are obtained using the method of root locus analysis. The performance of the proposed strategy is demonstrated by simulation and experiments. Experimental results show that the first two vibration modes of the manipulator are effectively suppressed. The setting time of the setup descends approximately 55%, reaching 3.12 s from 5.67 s.

Position Mooring Control Based on a Structural Reliability Criterion

DEFF Research Database (Denmark)

Fang, Shaoji; Leira, Bernt J.; Blanke, Mogens

2013-01-01

is achieved using structural reliability indices in a cost function, where both the mean mooring-line tension and dynamic effects are considered. An optimal set-point is automatically produced without need for manual interaction. The parameters of the extreme value distribution are calculated on-line thereby...... mooring lines simultaneously from exceeding a stress threshold, this paper suggests a new algorithm to determine the reference position and an associated control system. The safety of each line is assessed through a structural reliability index. A reference position where all mooring lines are safe...

Electro-Pneumatic Control System with Hydraulically Positioning Actuator Motor

Directory of Open Access Journals (Sweden)

V. N. Pilgunov

2016-01-01

Full Text Available A compressibility of the actuating fluid of a pneumatic drive (compressed air leads to significant landing of the pneumatic cylinder piston at the time of stop and hold of the load, a constant component of which can fluctuate significantly for the holding period.There are a lot of factors, which have a significant impact on the landing value of piston. Those are: an initial position of the piston at its stop, which determines the volume of the an active area of the piston, a value of the constant load component at the time of stop and its variation for the holding period, a transfer coefficient of the position component of the load, an active area of the pneumatic cylinder piston, as well as reduction in atmospheric pressure, which can significantly affect the operation of the control systems of small aircrafts flying at high altitudes.To reduce the landing value of piston due to changing value of the constant load component for its holding period, it is proposed to use a hydraulic positioner, which comprises a hydraulic cylinder the rod of which is rigidly connected to the rod of the pneumatic cylinder through the traverse, a cross-feed valve of the hydro-cylinder cavities with discrete electro-magnetic control, and adjustable chokes.A programmable logic controller provides the hydraulic positioner control. At the moment the piston stops and the load is held the cross-feed valve overlaps the hydro-cylinder cavities thereby locking the pneumatic cylinder piston and preventing its landing. With available pneumatic cylinder-controlled signal the cross-feed valve connects the piston and rod cavities of the positioner hydro-cylinder, the pneumatic cylinder piston is released and becomes capable of moving.A numerical estimate of landing of the pneumatic cylinder piston and its positioning quality is of essential interest. For this purpose, a technique to calculate the landing of piston has been developed taking into consideration that different

Identification and control of plasma vertical position using neural network in Damavand tokamak

International Nuclear Information System (INIS)

Rasouli, H.; Rasouli, C.; Koohi, A.

2013-01-01

In this work, a nonlinear model is introduced to determine the vertical position of the plasma column in Damavand tokamak. Using this model as a simulator, a nonlinear neural network controller has been designed. In the first stage, the electronic drive and sensory circuits of Damavand tokamak are modified. These circuits can control the vertical position of the plasma column inside the vacuum vessel. Since the vertical position of plasma is an unstable parameter, a direct closed loop system identification algorithm is performed. In the second stage, a nonlinear model is identified for plasma vertical position, based on the multilayer perceptron (MLP) neural network (NN) structure. Estimation of simulator parameters has been performed by back-propagation error algorithm using Levenberg–Marquardt gradient descent optimization technique. The model is verified through simulation of the whole closed loop system using both simulator and actual plant in similar conditions. As the final stage, a MLP neural network controller is designed for simulator model. In the last step, online training is performed to tune the controller parameters. Simulation results justify using of the NN controller for the actual plant.

Identification and control of plasma vertical position using neural network in Damavand tokamak

Energy Technology Data Exchange (ETDEWEB)

Rasouli, H. [School of Plasma Physics and Nuclear Fusion, Institute of Nuclear Science and Technology, AEOI, P.O. Box 14155-1339, Tehran (Iran, Islamic Republic of); Advanced Process Automation and Control (APAC) Research Group, Faculty of Electrical Engineering, K.N. Toosi University of Technology, P.O. Box 16315-1355, Tehran (Iran, Islamic Republic of); Rasouli, C.; Koohi, A. [School of Plasma Physics and Nuclear Fusion, Institute of Nuclear Science and Technology, AEOI, P.O. Box 14155-1339, Tehran (Iran, Islamic Republic of)

2013-02-15

In this work, a nonlinear model is introduced to determine the vertical position of the plasma column in Damavand tokamak. Using this model as a simulator, a nonlinear neural network controller has been designed. In the first stage, the electronic drive and sensory circuits of Damavand tokamak are modified. These circuits can control the vertical position of the plasma column inside the vacuum vessel. Since the vertical position of plasma is an unstable parameter, a direct closed loop system identification algorithm is performed. In the second stage, a nonlinear model is identified for plasma vertical position, based on the multilayer perceptron (MLP) neural network (NN) structure. Estimation of simulator parameters has been performed by back-propagation error algorithm using Levenberg-Marquardt gradient descent optimization technique. The model is verified through simulation of the whole closed loop system using both simulator and actual plant in similar conditions. As the final stage, a MLP neural network controller is designed for simulator model. In the last step, online training is performed to tune the controller parameters. Simulation results justify using of the NN controller for the actual plant.

Modeling and controller design of a 6-DOF precision positioning system

Science.gov (United States)

Cai, Kunhai; Tian, Yanling; Liu, Xianping; Fatikow, Sergej; Wang, Fujun; Cui, Liangyu; Zhang, Dawei; Shirinzadeh, Bijan

2018-05-01

A key hurdle to meet the needs of micro/nano manipulation in some complex cases is the inadequate workspace and flexibility of the operation ends. This paper presents a 6-degree of freedom (DOF) serial-parallel precision positioning system, which consists of two compact type 3-DOF parallel mechanisms. Each parallel mechanism is driven by three piezoelectric actuators (PEAs), guided by three symmetric T-shape hinges and three elliptical flexible hinges, respectively. It can extend workspace and improve flexibility of the operation ends. The proposed system can be assembled easily, which will greatly reduce the assembly errors and improve the positioning accuracy. In addition, the kinematic and dynamic model of the 6-DOF system are established, respectively. Furthermore, in order to reduce the tracking error and improve the positioning accuracy, the Discrete-time Model Predictive Controller (DMPC) is applied as an effective control method. Meanwhile, the effectiveness of the DMCP control method is verified. Finally, the tracking experiment is performed to verify the tracking performances of the 6-DOF stage.

Arrangement of permanent magnet and reed switches for control rod position indicator of SMART CEDM

International Nuclear Information System (INIS)

Yoo, J. Y.; Kim, J. I.; Kim, J. H.; Hur, H.; Jang, M. H.

2001-01-01

The reliability and accuracy of the information on control rod position are very important to the reactor safety and the design of the core protection system. A survey on the RSPT(Reed Switch Position Transmitter) type control rod position indication system and its actual implementation in the exiting nuclear power plants in Korea was performed first. The control rod position indicator having the high performance for SMART was developed on the basis of RSPT technology identified through the survey. The arrangement of permanent magnet and reed switches is the most important procedure in the design of control rod position indication. In this study, the characteristics of permanent magnet and reed switches are introduced and the calculation method for arrangement of permanent magnet and reed switch is presented

A test of positive affect induction for countering self-control depletion in cigarette smokers.

Science.gov (United States)

Shmueli, Dikla; Prochaska, Judith J

2012-03-01

The self-control strength model posits that exerting self-control on one task, such as resisting temptations, will deplete self-control and impair subsequent self-regulatory performance, such as controlling smoking. The current study examined interventions designed to replenish depleted self-control strength to prevent tobacco use by inducing positive affect. In a 2 × 2 design, 200 participants were randomized to either (1) resist eating from a plate of desserts (high temptation) or from a plate of raw vegetables (low temptation) and then (2) undergo a positive or neutral affect induction. Two inductions were compared (video vs. writing technique). Participants were then given a 10-min recess. Whether or not participants smoked during the recess, assessed by self-report and biochemical verification, served as the primary dependent variable. The interaction between depletion and exposure group was significant, Wald's χ² = 9.66, df = 3, p desserts, 65.5% to 85% smoked if they were in the neutral video or writing conditions versus 10.5% in the positive affect video group. Positive affect elicited with a video was able to counteract the detrimental effects of self-control depletion on smoking behavior, while writing exercises were associated with smoking. Implications for tobacco cessation intervention are discussed. PsycINFO Database Record (c) 2012 APA, all rights reserved.

A Clustered Randomized Controlled Trial of the Positive Prevention PLUS Adolescent Pregnancy Prevention Program.

Science.gov (United States)

LaChausse, Robert G

2016-09-01

To determine the impact of Positive Prevention PLUS, a school-based adolescent pregnancy prevention program on delaying sexual intercourse, birth control use, and pregnancy. I randomly assigned a diverse sample of ninth grade students in 21 suburban public high schools in California into treatment (n = 2483) and control (n = 1784) groups that participated in a clustered randomized controlled trial. Between October 2013 and May 2014, participants completed baseline and 6-month follow-up surveys regarding sexual behavior and pregnancy. Participants in the treatment group were offered Positive Prevention PLUS, an 11-lesson adolescent pregnancy prevention program. The program had statistically significant impacts on delaying sexual intercourse and increasing the use of birth control. However, I detected no program effect on pregnancy rates at 6-month follow-up. The Positive Prevention PLUS program demonstrated positive impacts on adolescent sexual behavior. This suggests that programs that focus on having students practice risk reduction skills may delay sexual activity and increase birth control use.

The plasma position control of ITER EDA plasma

International Nuclear Information System (INIS)

Senda, Ikuo; Nishio, Satoshi; Tsunematsu, Toshihide; Nishino, Toru; Fujieda, Hirobumi.

1994-09-01

The study on the plasma position control of ITER EDA performed by Japan Home Team during the sensitivity study in 1994 is summarized. The controllabilities of plasmas in the Outline Design and elongated version are compared. The model used to describe the motion of the plasma is a rigid model. The PD feedback control is applied with respect to the displacements of the plasma from the equilibrium. Three types of fluctuations, which initiate the motion of the plasma, are examined, namely a finite horizontal fluctuation field, a small horizontal fluctuation field such that the motion of the plasma is governed by the passive structures and an abrupt change of the poloidal beta β p and internal inductance l i . In the simulations of finite horizontal fluctuation fields, controls depend on the strength of the fluctuations, for instance, 3-5V is needed for 5-10G of fluctuation fields in the Outline Design. When the fluctuation field is small and the plasma displacement grows in a characteristic time of the passive structures, a few volt of the control voltage is enough to obtain good controllability. It is shown that the control when (β p , l i ) changes simultaneously is demanding and a large control voltage is required to maintain satisfactory control. Comparing the elongated version with the Outline Design, the control voltage which is larger than the Outline Design by a factor of 2-3 is required to obtain the same controllability in the elongated version. (author)

Conceptual Design of Angular Position Detector for Control Element Drive Mechanism of Small and Medium Reactor

International Nuclear Information System (INIS)

Yu, Je-Yong; Huh, Hyung; Kim, Ji-Ho; Choi, Suhn

2007-01-01

When the small and medium reactor is designed with a soluble boron free operation and nuclear heating for the reactor start-up, the design features require a Control Element Drive Mechanism (CEDM) to have a fine-step movement capability as well as a high reliability for a fine reactivity control. Also the reliability and accuracy of the information for the control rod position is important to the reactor safety as well as to design of the core protection system. The position signal of control rod is classified as a Class 1E because the rod position signal is used in the safety related systems. Therefore it will be separated from the control systems to the extent that a failure of any single control system component of a channel and shall have sufficient independence, redundancy, and testability to perform its safety functions assuming a single failure. The position indicator is composed of a permanent magnet, reed switches and a voltage divider. Four independent position indicators around the upper pressure housing provide an indication of the position of a control rod comprising of a permanent magnet with a magnetic field concentrator which moves with the extension shaft connected to the control rod. The zigzag arranged reed switches are positioned along a line parallel to the path of the movement of the permanent magnet and it is activated selectively when the permanent magnet passes by. A voltage divider electrically connected to the reed switches provides a signal commensurate with the position of the control rod. The signal may then be transmitted to a position indicating device. But position indicator can not recognize the malfunction of the rotary step motor of CEDM instantly because its signal output is changed after the control rod moves more than a distance of reed switch interval

Position, Attitude, and Fault-Tolerant Control of Tilting-Rotor Quadcopter

Science.gov (United States)

Kumar, Rumit

The aim of this thesis is to present algorithms for autonomous control of tilt-rotor quadcopter UAV. In particular, this research work describes position, attitude and fault tolerant control in tilt-rotor quadcopter. Quadcopters are one of the most popular and reliable unmanned aerial systems because of the design simplicity, hovering capabilities and minimal operational cost. Numerous applications for quadcopters have been explored all over the world but very little work has been done to explore design enhancements and address the fault-tolerant capabilities of the quadcopters. The tilting rotor quadcopter is a structural advancement of traditional quadcopter and it provides additional actuated controls as the propeller motors are actuated for tilt which can be utilized to improve efficiency of the aerial vehicle during flight. The tilting rotor quadcopter design is accomplished by using an additional servo motor for each rotor that enables the rotor to tilt about the axis of the quadcopter arm. Tilting rotor quadcopter is a more agile version of conventional quadcopter and it is a fully actuated system. The tilt-rotor quadcopter is capable of following complex trajectories with ease. The control strategy in this work is to use the propeller tilts for position and orientation control during autonomous flight of the quadcopter. In conventional quadcopters, two propellers rotate in clockwise direction and other two propellers rotate in counter clockwise direction to cancel out the effective yawing moment of the system. The variation in rotational speeds of these four propellers is utilized for maneuvering. On the other hand, this work incorporates use of varying propeller rotational speeds along with tilting of the propellers for maneuvering during flight. The rotational motion of propellers work in sync with propeller tilts to control the position and orientation of the UAV during the flight. A PD flight controller is developed to achieve various modes of the

Single axis control of ball position in magnetic levitation system using fuzzy logic control

Science.gov (United States)

Sahoo, Narayan; Tripathy, Ashis; Sharma, Priyaranjan

2018-03-01

This paper presents the design and real time implementation of Fuzzy logic control(FLC) for the control of the position of a ferromagnetic ball by manipulating the current flowing in an electromagnet that changes the magnetic field acting on the ball. This system is highly nonlinear and open loop unstable. Many un-measurable disturbances are also acting on the system, making the control of it highly complex but interesting for any researcher in control system domain. First the system is modelled using the fundamental laws, which gives a nonlinear equation. The nonlinear model is then linearized at an operating point. Fuzzy logic controller is designed after studying the system in closed loop under PID control action. The controller is then implemented in real time using Simulink real time environment. The controller is tuned manually to get a stable and robust performance. The set point tracking performance of FLC and PID controllers were compared and analyzed.

Enhancement of control rod drive mechanism seating position detector for JRR-3

International Nuclear Information System (INIS)

Ohuchi, Satoshi; Kurumada, Osamu; Kamiishi, Eigo; Sato, Masayuki; Ikekame, Yoshinori; Wada, Shigeru

2016-06-01

The purpose of the control rod drive mechanism seating position detector for JRR-3 is one of methods for confirming the shutdown condition of the reactor and sending out the seat position signal to other systems. The detector has been utilizing more than 25 years with maintenance regularly. However, some troubles occurred recently. Moreover, the detector has already been discontinued, and it is confirmed that the successor detector is unsuitable for the control rod drive mechanism of JRR-3. Therefore, it was necessary to select the adequate detector to the control rod drive mechanism of JRR-3. Accordingly, we built a test device with the aim of verifying several detectors for integrity and function. At the time of the test for performance confirmation, it was occurred unexpected problems. Nevertheless, we devise improvement of the problems and took measures. Thus we were able to make adequate detector for JRR-3 and replace to enhanced detector. This paper reports the Enhanced of Control rod drive mechanism seating position detector. (author)

Question popularity analysis and prediction in community question answering services.

Science.gov (United States)

Liu, Ting; Zhang, Wei-Nan; Cao, Liujuan; Zhang, Yu

2014-01-01

With the blooming of online social media applications, Community Question Answering (CQA) services have become one of the most important online resources for information and knowledge seekers. A large number of high quality question and answer pairs have been accumulated, which allow users to not only share their knowledge with others, but also interact with each other. Accordingly, volumes of efforts have been taken to explore the questions and answers retrieval in CQA services so as to help users to finding the similar questions or the right answers. However, to our knowledge, less attention has been paid so far to question popularity in CQA. Question popularity can reflect the attention and interest of users. Hence, predicting question popularity can better capture the users' interest so as to improve the users' experience. Meanwhile, it can also promote the development of the community. In this paper, we investigate the problem of predicting question popularity in CQA. We first explore the factors that have impact on question popularity by employing statistical analysis. We then propose a supervised machine learning approach to model these factors for question popularity prediction. The experimental results show that our proposed approach can effectively distinguish the popular questions from unpopular ones in the Yahoo! Answers question and answer repository.

Design of a Single-Cell Positioning Controller Using Electroosmotic Flow and Image Processing

Directory of Open Access Journals (Sweden)

Jhong-Yin Chen

2013-05-01

Full Text Available The objective of the current research was not only to provide a fast and automatic positioning platform for single cells, but also improved biomolecular manipulation techniques. In this study, an automatic platform for cell positioning using electroosmotic flow and image processing technology was designed. The platform was developed using a PCI image acquisition interface card for capturing images from a microscope and then transferring them to a computer using human-machine interface software. This software was designed by the Laboratory Virtual Instrument Engineering Workbench, a graphical language for finding cell positions and viewing the driving trace, and the fuzzy logic method for controlling the voltage or time of an electric field. After experiments on real human leukemic cells (U-937, the success of the cell positioning rate achieved by controlling the voltage factor reaches 100% within 5 s. A greater precision is obtained when controlling the time factor, whereby the success rate reaches 100% within 28 s. Advantages in both high speed and high precision are attained if these two voltage and time control methods are combined. The control speed with the combined method is about 5.18 times greater than that achieved by the time method, and the control precision with the combined method is more than five times greater than that achieved by the voltage method.

Robustness Analysis of Visual Question Answering Models by Basic Questions

KAUST Repository

Huang, Jia-Hong

2017-11-01

Visual Question Answering (VQA) models should have both high robustness and accuracy. Unfortunately, most of the current VQA research only focuses on accuracy because there is a lack of proper methods to measure the robustness of VQA models. There are two main modules in our algorithm. Given a natural language question about an image, the first module takes the question as input and then outputs the ranked basic questions, with similarity scores, of the main given question. The second module takes the main question, image and these basic questions as input and then outputs the text-based answer of the main question about the given image. We claim that a robust VQA model is one, whose performance is not changed much when related basic questions as also made available to it as input. We formulate the basic questions generation problem as a LASSO optimization, and also propose a large scale Basic Question Dataset (BQD) and Rscore (novel robustness measure), for analyzing the robustness of VQA models. We hope our BQD will be used as a benchmark for to evaluate the robustness of VQA models, so as to help the community build more robust and accurate VQA models.

Robustness Analysis of Visual Question Answering Models by Basic Questions

KAUST Repository

Huang, Jia-Hong

2017-01-01

Visual Question Answering (VQA) models should have both high robustness and accuracy. Unfortunately, most of the current VQA research only focuses on accuracy because there is a lack of proper methods to measure the robustness of VQA models. There are two main modules in our algorithm. Given a natural language question about an image, the first module takes the question as input and then outputs the ranked basic questions, with similarity scores, of the main given question. The second module takes the main question, image and these basic questions as input and then outputs the text-based answer of the main question about the given image. We claim that a robust VQA model is one, whose performance is not changed much when related basic questions as also made available to it as input. We formulate the basic questions generation problem as a LASSO optimization, and also propose a large scale Basic Question Dataset (BQD) and Rscore (novel robustness measure), for analyzing the robustness of VQA models. We hope our BQD will be used as a benchmark for to evaluate the robustness of VQA models, so as to help the community build more robust and accurate VQA models.

Two-Year-Old Children Differentiate Test Questions from Genuine Questions

Science.gov (United States)

Grosse, Gerlind; Tomasello, Michael

2012-01-01

Children are frequently confronted with so-called "test questions". While genuine questions are requests for missing information, test questions ask for information obviously already known to the questioner. In this study we explored whether two-year-old children respond differentially to one and the same question used as either a genuine question…

The position control of a capsule filled with magnetic fluid

International Nuclear Information System (INIS)

Rhee, E.J.; Park, M.K.; Yamane, R.; Oshima, S.

2002-01-01

In this paper, in order to establish the technique of a nozzle-flapper system of a servo valve using magnetic fluid in hydraulic system, a governing equation regarding the levitation of a capsule filled with magnetic fluid is formulated. Using PID control, an experiment for the position control of a capsule was performed. The experimental results were compared with the simulation results found by the governing equation

Nuclear questions; Le nucleaire en questions

Energy Technology Data Exchange (ETDEWEB)

Berg, Eugene

2012-02-15

Civilian and military nuclear questions fill a multitude of publications these days, especially after the Japanese tsunami and the Fukushima disaster. The author analyses some of them and highlights the links between civil and military nuclear industries, the realities of the nuclear cycle and related industrial questions before concluding on the controversial issue of weapons and their proliferation potential

Plasma position and shape control device for thermonuclear device

International Nuclear Information System (INIS)

Takeuchi, Kazuhiro; Abe, Mitsushi; Kinoshita, Shigemi.

1993-01-01

A plasma position and shape control system is constituted with a measuring device, a quenching probability calculation section and a control calculation section. A quenching probability is calculated in the quenching probability calculation section by using a measuring data on temperature, electric current and magnetic field of superconductive coils, based on a margin upto a limit value. The control calculation section selects a control method which decreases applied voltage or current instruction value as the quenching probability of the coils is higher. Since the quenching probability of the superconductive coils can be forecast and a state of low quenching danger can be selected, the safety of the device is improved. When the quenching danger is allowed to a predetermined value, a wide operation region can be provided. (N.H.)

Linear quadratic Gaussian controller design for plasma current, position and shape control system in ITER

International Nuclear Information System (INIS)

Belyakov, V.; Kavin, A.; Rumyantsev, E.; Kharitonov, V.; Misenov, B.; Ovsyannikov, A.; Ovsyannikov, D.; Veremei, E.; Zhabko, A.; Mitrishkin, Y.

1999-01-01

This paper is focused on the linear quadratic Gaussian (LQG) controller synthesis methodology for the ITER plasma current, position and shape control system as well as power derivative management system. It has been shown that some poloidal field (PF) coils have less influence on reference plasma-wall gaps control during plasma disturbances and hence they have been used to reduce total control power derivative by means of the additional non-linear feedback. The design has been done on the basis of linear models. Simulation was provided for non-linear model and results are presented and discussed. (orig.)

Position controller for the arm of a neutron diffractometer using fuzzy logic

International Nuclear Information System (INIS)

Ayala P, G.F.

1994-01-01

The neutron diffractometer is an important instrument coupled to one of the radial outlets of the TRIGA-3-Salazar Reactor and is used mainly to analyze textures and crystal lattices. One of its main components is the velocity analysis goniometer which controls in a tangential way the movements of the sensor requiring for this a resolution of a hundredth of degree, but at the same time wide displacements are required. It is necessary to design and construct a system on the basis of a micro controller which control the long movements in a rapid way and with the needed accuracy. In this work, a proposition is presented: to replace the A.C. motor with a D.C. motor with a wide range of velocity and supplied with a card (DAC) to control the velocity by means of digital data. Moreover, a programmed micro controller with an algorithm based on fuzzy logic receiving data in BCD will be use. The use of micro controller will allow to set free the personal computer of the position of the goniometer; nevertheless, the system will report to the P C and its control program about the present position of the goniometer and the time when the desired position is reached. It is also consider that the user will be away from the system (a minimum of 15 meters) in order to avoid the zone with a high intensity of background radiation. (Author)

The Marketing & Positive Impacts of Behavioral Control System on Societies & Countries

Directory of Open Access Journals (Sweden)

Ahmad Adel Mostafa

2015-03-01

Full Text Available Behavioral control systems are one of the most prominent tools used by managers and marketers for different internal and external purposes. One of the most important external purposes they have been used for is influencing consumer behavior. This paper explores the positive effects of implementing such systems on societies. It discusses consumer perception of the systems, their influence on their financial behavior in different contexts, how can they create order and how as well as to what extent should it be implemented and finally how can minimize negative consumer behavior. A judgment based sample of typical consumers was surveyed using questionnaires for collecting primary data on these aspects. Secondary data from Egypt, Singapore and Malaysia was also used as an example of using behavioral control systems. Results show that consumers in general have a positive attitude towards imposing such systems. However, there were worries about misuse, abuse and overuse of theses systems’ policies. Consequently, data shows that behavioral control systems can positively enhance and influence consumer behavior as long as it is used to balance both consumer and retailer interests in a moderate, risk free manner.

Student teachers’ mathematical questioning and courage in metaphorical thinking learning

Science.gov (United States)

Hendriana, H.; Hidayat, W.; Ristiana, M. G.

2018-01-01

This study was designed in the form of experiments with control group design and post-test only which aimed to examine the role of metaphorical thinking learning in the mathematical questioning ability of student teachers based on the level of mathematical courage. The population of this study was student teachers of mathematics education study program in West Java Province, while the sample of this study was 152 student teachers which were set purposively and then randomly to be included in the experimental class and control class. Based on the results and discussion, it was concluded that: (a) the mathematical questioning ability of student teachers who received Metaphorical Thinking learning was better than those who received conventional learning seen from mathematical courage level; (b) learning and mathematical courage level factors affected the achievement of student teachers’ mathematical questioning ability. In addition, there was no interaction effect between learning and mathematical courage level (high, medium, and low) simultaneously in developing student teachers’ mathematical questioning ability; (c) achievement of mastering mathematical questioning ability of student teacher was still not well achieved on indicator of problem posing in the form of non-routine question and open question.

[Two simple questions to diagnose post-stroke depression].

Science.gov (United States)

Nolte, C H; Müller-Nordhorn, J; Jungehülsing, G J; Rossnagel, K; Reich, A; Roll, S; Laumeier, I; Beerfelde, D; Willich, S N; Villringer, A

2006-05-01

Many patients develop a depression after having suffered a stroke. Such a Post-Stroke Depression (PSD) impairs rehabilitation and quality of life. PSD is underdiagnosed in spite of available treatment. Several questionnaires have been created to diagnose a PSD. But questionnaires have been considered cumbersome and time-consuming. The aim of this study was to find out whether two simple, standardised questions will identify those stroke patients, who have developed a PSD. The two case-finding questions and the Beck Depression Inventory (BDI) were sent to patients of the Berlin Acute Stroke Study (BASS) four years after their stroke. Incomplete questionnaires were complemented via mail or telephone. Severity of depression was assessed by means of BDI. Out of 211 patients, 199 responded to the questionnaire (94 %). 193 questionnaires were complete (97 %). Forty-two patients affirmed both case-finding questions (22 %). Compared to patients, who did not affirm both questions, these patients had a higher BDI score (19 +/- 8 vs. 7 +/- 5; p two questions were 89 % and 90 %, respectively. The positive and negative predictive value were 60 % and 98 % respectively. The number of confirmed questions (0, 1, 2) correlated well with the BDI score (r (2) = 0.67, p Two standardized questions can identify patients with PSD for further diagnostic evaluation and therapy. Diagnosis of PSD might be facilitated by using them as screening instrument.

Feedback control of horizontal position and plasma surface shape in a non-circular tokamak

International Nuclear Information System (INIS)

Moriyama, Shin-ichi; Nakamura, Kazuo; Nakamura, Yukio; Itoh, Satoshi

1986-01-01

The linear model for the coupled horizontal position and plasma surface shape control in the non-circular tokamak device was described. It enables us to estimate easily the displacement and the distortion due to the changes in plasma pressure and current density distribution. The PI-controller and the optimal regulator were designed with the linear model. Transient-response analysis of the control system in the TRIAM-1M tokamak showed that the optimal regulator is superior to the PI-controller with regard to the mutual-interference between the position control system and the elongation control system. (author)

Control rod position and temperature coefficients in HTTR power-rise tests. Interim report

International Nuclear Information System (INIS)

Fujimoto, Nozomu; Nojiri, Naoki; Takada, Eiji; Saito, Kenji; Kobayashi, Shoichi; Sawahata, Hiroaki; Kokusen, Sigeru

2001-03-01

Power-rise tests of the High Temperature Engineering Test Reactor (HTTR) have been carried out aiming to achieve 100% power. So far, 50% of power operation and many tests have been carried out. In the HTTR, temperature change in core is so large to achieve the outlet coolant temperature of 950degC. To improve the calculation accuracy of the HTTR reactor physics characteristics, control rod positions at criticality and temperature coefficients were measured at each step to achieve 50% power level. The calculations were carried out using Monte Carlo code and diffusion theory with temperature distributions in the core obtained by reciprocal calculation of thermo-hydraulic code and diffusion theory. Control rod positions and temperature coefficients were calculated by diffusion theory and Monte Carlo method. The test results were compared to calculation results. The control rod positions at criticality showed good agreement with calculation results by Monte Carlo method with error of 50 mm. The control position at criticality at 100% was predicted around 2900mm. Temperature coefficients showed good agreement with calculation results by diffusion theory. The improvement of calculation will be carried out comparing the measured results up to 100% power level. (author)

The Influence of PZT Actuators Positioning in Active Structural Acoustic Control

Directory of Open Access Journals (Sweden)

P. Švec

2007-01-01

Full Text Available This paper deals with the effect of secondary actuator positioning in an active structural acoustics control (ASAC experiment. The ASAC approach is based on minimizing the sound radiation from structures to the far field by controlling the structural vibrations. In this article a rectangular steel plate structure was assumed with one secondary actuator attached to it. As a secondary actuator, a specially designed piezoelectric stripe actuator was used. We studied the effect of the position of the actuator on the pattern and on the radiated sound field of the structural vibration, with and without active control. The total radiated power was also measured. The experimental data was confronted with the results obtained by a numerical solution of the mathematical model used. For the solution, the finite element method in the ANSYS software package was used. 

Position Control of an X4-Flyer Using a Tether

Directory of Open Access Journals (Sweden)

Yusuke Ouchi

2016-05-01

Full Text Available In Japan, aging of infrastructures, such as roads,bridges, and water and sewer services, etc. poses a problem, andit is required to extend the life-span of such infrastructures bymaintenance. Among infrastructures, especially bridges areperiodically inspected by short range visual observations, whichcheck the damage and deterioration of the surface. However,since there are some cases where the short range visualobservation is difficult, an alternative method is required so as toreplace the short range visual observation with it. So, "X4-Flyer"is very attractive because of realizing a movement at high altitudeeasily. The objective of this study is to develop a tethered X4-Flyer, so that the conventional short range visual observation ofbridges is replaced by it. In this paper, a method for themeasurement and control of the position is described by using atether for controlling the position of the X4-Flyer. In addition, itis checked whether the tethered X4-Flyer can control the positionusing the proposed method or not, letting it fly in a state in whicha tether is being attached

A remote handling rate-position controller for telemanipulating in a large workspace

International Nuclear Information System (INIS)

Barrio, Jorge; Ferre, Manuel; Suárez-Ruiz, Francisco; Aracil, Rafael

2014-01-01

This paper presents a new haptic rate-position controller, which allows manipulating a slave robot in a large workspace using a small haptic device. This control algorithm is very effective when the master device is much smaller than the slave device. Haptic information is displayed to the user so as to be informed when a change in the operation mode occurs. This controller allows performing tasks in a large remote workspace by using a haptic device with a reduced workspace such as Phantom. Experimental results have been carried out using a slave robot from Kraft Telerobotics and a commercial haptic interface as a master device. A curvature path following task has been simulated using the proposed controller which was compared with the force-position control algorithm. Results obtained show that higher accuracy is obtained when the proposed method is used, spending a similar amount of time to perform the task

A remote handling rate-position controller for telemanipulating in a large workspace

Energy Technology Data Exchange (ETDEWEB)

Barrio, Jorge, E-mail: jordi.barrio@upm.es; Ferre, Manuel, E-mail: m.ferre@upm.es; Suárez-Ruiz, Francisco, E-mail: fa.suarez@upm.es; Aracil, Rafael, E-mail: rafael.aracil@upm.es

2014-01-15

This paper presents a new haptic rate-position controller, which allows manipulating a slave robot in a large workspace using a small haptic device. This control algorithm is very effective when the master device is much smaller than the slave device. Haptic information is displayed to the user so as to be informed when a change in the operation mode occurs. This controller allows performing tasks in a large remote workspace by using a haptic device with a reduced workspace such as Phantom. Experimental results have been carried out using a slave robot from Kraft Telerobotics and a commercial haptic interface as a master device. A curvature path following task has been simulated using the proposed controller which was compared with the force-position control algorithm. Results obtained show that higher accuracy is obtained when the proposed method is used, spending a similar amount of time to perform the task.

Design of L1 -Adaptive Controller for Single Axis Positioning Table

Directory of Open Access Journals (Sweden)

Amjad Jalil Humaidi

2017-11-01

Full Text Available L1 adaptive controller has proven to provide fast adaptation with guaranteed transients in a large variety of systems. It is commonly used for controlling systems with uncertain time-varying unknown parameters. The effectiveness of L1 adaptive controller for position control of single axis has been examined and compared with Model Reference Adaptive Controller (MRAC. The Linear servo motor is one of the main constituting elements of the x-y table which is mostly used in automation application. It is characterized by time-varying friction and disturbance

Virtual reality simulation of fuzzy-logic control during underwater dynamic positioning

Science.gov (United States)

Thekkedan, Midhin Das; Chin, Cheng Siong; Woo, Wai Lok

2015-03-01

In this paper, graphical-user-interface (GUI) software for simulation and fuzzy-logic control of a remotely operated vehicle (ROV) using MATLAB™ GUI Designing Environment is proposed. The proposed ROV's GUI platform allows the controller such as fuzzy-logic control systems design to be compared with other controllers such as proportional-integral-derivative (PID) and sliding-mode controller (SMC) systematically and interactively. External disturbance such as sea current can be added to improve the modelling in actual underwater environment. The simulated results showed the position responses of the fuzzy-logic control exhibit reasonable performance under the sea current disturbance.

Questions never asked. Positive family outcomes of extremely premature childbirth

DEFF Research Database (Denmark)

Lou, Hanne; Pedersen, Birthe D; Hedegaard, Morten

2009-01-01

OBJECTIVE: To explore positive aspects of family life after extremely premature childbirth, thereby supplementing current literature on long-term family outcome. DESIGN: Semi-structured, qualitative research interviews were analysed according to the editing strategy described by Miller and Crabtree....... SETTING: Denmark, Europe. PARTICIPANTS: Nine fathers and 11 mothers of 14 children born before 28 completed weeks of gestation at a tertiary centre were interviewed when their children were 7-10 years old. RESULTS: Whereas developmental delay, functional limitations, family burden, and parental distress...

Positive control for cytotoxicity evaluation of dental vinyl polysiloxane impression materials using sodium lauryl sulfate.

Science.gov (United States)

Kwon, Jae-Sung; Lee, Sang-Bae; Kim, Kwang-Mahn; Kim, Kyoung-Nam

2014-11-01

Vinyl polysiloxane (VPS) is elastomeric dental impression material which, despite having very few reports of adverse reactions, has shown high levels of cytotoxicity that is difficult to be interpreted without referencing to the positive control material. Therefore, in this study, positive control VPS was developed using sodium lauryl sulfate (SLS) for the reference of cytotoxicity test. The positive control VPS with SLS was formed with a different proportion of SLS (0, 1, 2, 4, 8 and 16 wt%) added to the base. The cytotoxicity test was then carried out using the extractions or dilutions of the extractions from each of the test samples using murine fibroblast cells (L929). The final product of positive control VPS behaved similar to commercially available VPS; being initially liquid-like and then becoming rubber-like. Ion chromatography showed that the level of SLS released from the product increased as the proportion of added SLS increased, consequently resulting in an increased level of cytotoxicity. Also, the commercially available VPS was less cytotoxic than the positive control VPS with more or equal to 2 wt% of SLS. However, even the VPS with the highest SLS (16 wt%) did not cause oral mucosa irritation during the animal study. The positive control VPS was successfully produced using SLS, which will be useful in terms of providing references during in vitro cytotoxicity testing.

Can multiple-choice questions simulate free-response questions?

OpenAIRE

Lin, Shih-Yin; Singh, Chandralekha

2016-01-01

We discuss a study to evaluate the extent to which free-response questions could be approximated by multiple-choice equivalents. Two carefully designed research-based multiple-choice questions were transformed into a free-response format and administered on the final exam in a calculus-based introductory physics course. The original multiple-choice questions were administered in another similar introductory physics course on final exam. Findings suggest that carefully designed multiple-choice...

Design of magnetic flux concentrator of permancent magnet for control rod position indicator of SMART CEDM

International Nuclear Information System (INIS)

Yoo, J. Y.; Kim, J. H.; Hur, H.; Kim, J. I.

2002-01-01

The reliability and accuracy of the information on control rod position are very important to the reactor safety and the design of the core protection system. A survey on the RSPT(Reed Switch Position Transmitter) type control rod position indication system and its actual implementation in the exiting nuclear power plants in Korea was performed first. The control rod position indicator having the high performance for SMART was developed on the basis of RSPT technology identified through the survey. The arrangement of permanent magnet and reed switches is the most important procedure in the design of control rod position indication. In this study, the magnetic flux concentrator of permanent magnet is introduced and the calculation method for effective flux area for reed switch is presented

Feelings: what questions best discriminate women with and without eating disorders?

Science.gov (United States)

Abraham, S F; von Lojewski, A; Anderson, G; Clarke, S; Russell, J

2009-03-01

This study explored feelings that discriminate between eating disorder and community groups of women. Responses to 25 questions about body image (9), eating (8) self-esteem (3) general psychology (5) were collected in 2002-2003 (N=268) and 2005-2006 (N=472). Wilk's lambda was used to test discrimination. The most discriminating psychological questions were: 'feeling unhappy and unable to cope as well as usual', 'unease attending social functions', 'fearing loss of control over emotions'; and for eating questions were: 'feeling uneasy if other people saw you eating', 'feeling preoccupied with food/eating', 'fearing loss of control over eating'. For body image only 'feeling preoccupied with body weight/shape' and 'fearing loss of control over your body' discriminated. Questions relating to weight and shape for self-esteem ('feeling fat', 'fearing weight gain' and 'wanting to lose weight') discriminated poorly. Results for both cohorts were consistent. Preoccupation with thoughts of eating or body image and fear of loss of control of these would be useful additions to eating disorders criteria. Psychological impairment should also be present.

Conducting systematic reviews of intervention questions I: Writing the review protocol, formulating the question and searching the literature.

Science.gov (United States)

O'Connor, A M; Anderson, K M; Goodell, C K; Sargeant, J M

2014-06-01

This article is the fourth of six articles addressing systematic reviews in animal agriculture and veterinary medicine. Previous articles in the series have introduced systematic reviews, discussed study designs and hierarchies of evidence, and provided details on conducting randomized controlled trials, a common design for use in systematic reviews. This article describes development of a review protocol and the first two steps in a systematic review: formulating a review question, and searching the literature for relevant research. The emphasis is on systematic reviews of questions related to interventions. The review protocol is developed prior to conducting the review and specifies the plan for the conduct of the review, identifies the roles and responsibilities of the review team and provides structured definitions related to the review question. For intervention questions, the review question should be defined by the PICO components: population, intervention, comparison and outcome(s). The literature search is designed to identify all potentially relevant original research that may address the question. Search terms related to some or all of the PICO components are entered into literature databases, and searches for unpublished literature also are conducted. All steps of the literature search are documented to provide transparent reporting of the process. © 2014 Blackwell Verlag GmbH.

Flower development: open questions and future directions.

Science.gov (United States)

Wellmer, Frank; Bowman, John L; Davies, Brendan; Ferrándiz, Cristina; Fletcher, Jennifer C; Franks, Robert G; Graciet, Emmanuelle; Gregis, Veronica; Ito, Toshiro; Jack, Thomas P; Jiao, Yuling; Kater, Martin M; Ma, Hong; Meyerowitz, Elliot M; Prunet, Nathanaël; Riechmann, José Luis

2014-01-01

Almost three decades of genetic and molecular analyses have resulted in detailed insights into many of the processes that take place during flower development and in the identification of a large number of key regulatory genes that control these processes. Despite this impressive progress, many questions about how flower development is controlled in different angiosperm species remain unanswered. In this chapter, we discuss some of these open questions and the experimental strategies with which they could be addressed. Specifically, we focus on the areas of floral meristem development and patterning, floral organ specification and differentiation, as well as on the molecular mechanisms underlying the evolutionary changes that have led to the astounding variations in flower size and architecture among extant and extinct angiosperms.

Four Questions

Science.gov (United States)

Hark-Weber, Amara G., Ed.

2013-01-01

The author is pleased to introduce a new section in "TAJ," Four Questions. The structure is simple: four questions are asked to teaching artists working in various media and locations. The questions are always the same, but because each teaching artist's approach is unique, their answers will provide an insight into particular methodologies that…

Question Word in the Mandarin Language

Directory of Open Access Journals (Sweden)

Xu Yunyu

2016-12-01

Full Text Available In an interrogative sentence in Mandarin language, a question word can be placed in the beginning, middle or end of a sentence. Because of the different nation and culture, when a foreign student learns Mandarin, they find it difficult to understand the question words and the position of the question words in that language. Because of that, the writer proposes to explain such problems. This research aims to find out what are the types of question words in Mandarin, and also to explain the function and usage of question words in the Mandarin interrogative sentence. An interrogative sentence is a very important sentence. In Mandarin, the following question words: 谁(shuí “Who”，在哪里(zài nǎli “where”, 在哪儿(zài nǎ’er “where”，为什么(wèi shénme “why”, 怎么(zěnme “why”，多少（duō shǎo） “how many”，多久(duō jiǔ “how long”，什么时候 (shénme shíhòu “when”，什么(shénme “what”，做什么(zuò shénme “why”，干 什么(gàn shénme “why”，干嘛(gànma “why” and so on are used to ask “who”, “where”, “what”, “how much”, “when”, “what time”, and “why”. Those words have different functions and usage. Each sentence has a certain structure and word order. A question word can be placed in the beginning, middle, or end of a sentence. When the place is changed, there is a possibility of miscommunication.   DOI: https://doi.org/10.24071/llt.2013.160106

Question Formation and Focus Construction in Owo: A Yoruba Dialect

Directory of Open Access Journals (Sweden)

Boluwaji Oshodi

2016-06-01

Full Text Available Question formation and focusing are two transformational processes attested in Standard Yorùbá both of which have been extensively discussed in previous studies. However, very little is known about these concepts in Owo (Owò̩̩̀ a south-East Yoruba (Yorùbá dialect. This study examines the concept of questions and focusing in Owo ̩̩̀̀dialect with a comparison of the processes in Standard Yorùbá. The study revealed some differences as well as similarities in the two processes in Owo ̩̩̀̀and standard Yorùbá. Just like in Standard Yorùbá, question markers in Owo ̩̩̀̀normally occur in sentence initial and final positions. However, the question marker de ̩̀constantly appears sentence medially before and before verbs in certain constructions. Furthermore, while the focus marker in Yorùbá normally occurs immediately after the focused item with a stable form, the focus marker in Owo ̩̩̀̀usually occurs at the sentence final position as a reduplicated form of the last syllable of the final item. Also, a pronoun which indicates number and agreement usually occurs immediately after the focused item in Owò̩̩̀. Finally, just like in Yorùbá, there is a syntactic relationship between question and focusing in Owo ̩̩̀̀dialect.

Association between framing of the research question using the PICOT format and reporting quality of randomized controlled trials

Directory of Open Access Journals (Sweden)

Thabane Lehana

2010-02-01

Full Text Available Abstract Background Experts recommend formulating a structured research question to guide the research design. However, the basis for this recommendation has not been formally evaluated. The aim of this study was to examine if a structured research question using the PICOT (Population, Intervention, Comparator, Outcome, Time-frame format is associated with a better reporting quality of randomized controlled trials (RCTs. Methods We evaluated 89 RCTs reports published in three endocrinology journals in 2005 and 2006, the quality of reporting of which was assessed in a previous study. We examined whether the reports stated each of the five elements of a structured research question: population, intervention, comparator, outcome and time-frame. A PICOT score was created with a possible score between 0 and 5. Outcomes were: 1 a 14-point overall reporting quality score (OQS based on the Consolidated Standards for Reporting Trials; and 2 a 3-point key score (KS, based on allocation concealment, blinding and use of intention-to-treat analysis. We conducted multivariable regression analyses using generalized estimating equations to determine if a higher PICOT score or the use of a structured research question were independently associated with a better reporting quality. Journal of publication, funding source and sample size were identified as factors associated with OQS in our previous report on this dataset, and therefore included in the model. Results A higher PICOT score was independently associated with OQS (incidence rate ratio (IRR = 1.021, 95% CI: 1.012 to 1.029 and KS (IRR = 1.142, 95% CI: 1.079 to 1.210. A structured research question was present in 33.7% of the reports and it was associated with a better OQS (IRR = 1.095, 95% CI 1.059-1.132 and KS (IRR = 1.530, 95% CI 1.311-1.786. Conclusions Better framing of the research question using the PICOT format is independently associated with better overall reporting quality - although the effect

One Hundred Years of The Czech Question: A Historian's Account

OpenAIRE

Urban, Otto

1995-01-01

By focusing on the nation's internal life as well as its position within the Hapsburg monarchy specifically & Central Europe more generally, the actual state of Czech society at the time Tomas G. Masaryk's Ceska otazka (The Czech Question [1895]) was written is described. Masaryk's basic thesis about the relationship between the Czech question & humanity was derived from historical reality, but also represented an attempt to link Czech nationalism with a set of metaphysically conceived values...

An energy-saving nonlinear position control strategy for electro-hydraulic servo systems.

Science.gov (United States)

Baghestan, Keivan; Rezaei, Seyed Mehdi; Talebi, Heidar Ali; Zareinejad, Mohammad

2015-11-01

The electro-hydraulic servo system (EHSS) demonstrates numerous advantages in size and performance compared to other actuation methods. Oftentimes, its utilization in industrial and machinery settings is limited by its inferior efficiency. In this paper, a nonlinear backstepping control algorithm with an energy-saving approach is proposed for position control in the EHSS. To achieve improved efficiency, two control valves including a proportional directional valve (PDV) and a proportional relief valve (PRV) are used to achieve the control objectives. To design the control algorithm, the state space model equations of the system are transformed to their normal form and the control law through the PDV is designed using a backstepping approach for position tracking. Then, another nonlinear set of laws is derived to achieve energy-saving through the PRV input. This control design method, based on the normal form representation, imposes internal dynamics on the closed-loop system. The stability of the internal dynamics is analyzed in special cases of operation. Experimental results verify that both tracking and energy-saving objectives are satisfied for the closed-loop system. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

Position Control Method For Pick And Place Robot Arm For Object Sorting System

Directory of Open Access Journals (Sweden)

Khin Moe Myint

2015-08-01

Full Text Available The more increase the number of industries in developing countries the more require labourers or workers in that. To reduce the cost of labour force and to increase the manufacturing capacity of industries the advanced robot arms are more needed. The aim of this journal is to eliminate the manual control for object sorting system.Robot arm design in this research uses two joints three links and servo motors to drive. Microcontroller is used to generate required PWM signal for servo motors. In this research the position control of robot arm was designed by using kinematic control methods. There are two types of kinematic control methods which are forward and reverse kinematic methods. In forward kinematic method the input parameters are the joint angles and link length of robot arm and then the output is the position at XYZ coordinate of tool or gripper. In inverse kinematic the input parameters are position at XYZ coordinate of gripper and the link length of robot arm and then the output parameters are the joint angles. So kinematic methods can explain the analytical description of the geometry motion of the manipulator with reference to a robot coordinate system fixed to a frame without consideration of the forces or the moments causing the movements. For sorting system Metal detector is used to detect the metal or non-metal. This position control of pick and place robot arm is fully tested and the result is obtained more precisely.

Determination of the plasma position for its real-time control in the COMPASS tokamak

International Nuclear Information System (INIS)

Janky, F.; Havlicek, J.; Valcarcel, D.; Hron, M.; Horacek, J.; Kudlacek, O.; Panek, R.; Carvalho, B.B.

2011-01-01

An efficient horizontal and vertical stabilization of the plasma column position are essential for a reliable tokamak operation. Plasma position is generally determined by plasma current, plasma pressure and external vertical and horizontal magnetic fields. Such fields are generated by poloidal field coils and proper algorithm for the current control have to by applied, namely, in case of fast feedback loops. This paper presents a real-time plasma position reconstruction algorithms developed for the COMPASS tokamak. Further, its implementation in the MARTe (Multithreaded Application Real-Time executor) is described and the first results from test of the algorithm for real-time control of horizontal plasma positions are presented.

Determination of the plasma position for its real-time control in the COMPASS tokamak

Energy Technology Data Exchange (ETDEWEB)

Janky, F., E-mail: jankyf@ipp.cas.cz [Institute of Plasma Physics, AS CR, v.v.i., Association EURATOM/IPP.CR, Za Slovankou 3, 182 00 Prague (Czech Republic); Charles University in Prague, Faculty of Mathematics and Physics, V Holesovickach 2, CZ-18000 Prague (Czech Republic); Havlicek, J. [Institute of Plasma Physics, AS CR, v.v.i., Association EURATOM/IPP.CR, Za Slovankou 3, 182 00 Prague (Czech Republic); Charles University in Prague, Faculty of Mathematics and Physics, V Holesovickach 2, CZ-18000 Prague (Czech Republic); Valcarcel, D. [Associacao EURATOM/IST, Instituto de Plasmas e Fusao Nuclear - Laboratorio Associado, Instituto Superior Tecnico, P1049-001 Lisboa (Portugal); Hron, M.; Horacek, J. [Institute of Plasma Physics, AS CR, v.v.i., Association EURATOM/IPP.CR, Za Slovankou 3, 182 00 Prague (Czech Republic); Kudlacek, O. [Czech Technical University, Faculty of Nuclear Sciences and Physical Engineering, Technicka 2, 166 27 Prague (Czech Republic); Panek, R. [Institute of Plasma Physics, AS CR, v.v.i., Association EURATOM/IPP.CR, Za Slovankou 3, 182 00 Prague (Czech Republic); Carvalho, B.B. [Associacao EURATOM/IST, Instituto de Plasmas e Fusao Nuclear - Laboratorio Associado, Instituto Superior Tecnico, P1049-001 Lisboa (Portugal)

2011-10-15

An efficient horizontal and vertical stabilization of the plasma column position are essential for a reliable tokamak operation. Plasma position is generally determined by plasma current, plasma pressure and external vertical and horizontal magnetic fields. Such fields are generated by poloidal field coils and proper algorithm for the current control have to by applied, namely, in case of fast feedback loops. This paper presents a real-time plasma position reconstruction algorithms developed for the COMPASS tokamak. Further, its implementation in the MARTe (Multithreaded Application Real-Time executor) is described and the first results from test of the algorithm for real-time control of horizontal plasma positions are presented.

Phrasal Paraphrase Based Question Reformulation for Archived Question Retrieval.

Directory of Open Access Journals (Sweden)

Yu Zhang

Full Text Available Lexical gap in cQA search, resulted by the variability of languages, has been recognized as an important and widespread phenomenon. To address the problem, this paper presents a question reformulation scheme to enhance the question retrieval model by fully exploring the intelligence of paraphrase in phrase-level. It compensates for the existing paraphrasing research in a suitable granularity, which either falls into fine-grained lexical-level or coarse-grained sentence-level. Given a question in natural language, our scheme first detects the involved key-phrases by jointly integrating the corpus-dependent knowledge and question-aware cues. Next, it automatically extracts the paraphrases for each identified key-phrase utilizing multiple online translation engines, and then selects the most relevant reformulations from a large group of question rewrites, which is formed by full permutation and combination of the generated paraphrases. Extensive evaluations on a real world data set demonstrate that our model is able to characterize the complex questions and achieves promising performance as compared to the state-of-the-art methods.

Positive versus Negative. A cognitive perspective on wording effects for contrastive questions in attitude surveys

NARCIS (Netherlands)

Kamoen, N.

2012-01-01

Standardized surveys are used in many contexts to measure people’s opinions and attitudes. Although it is widely assumed that survey answers represent the ‘true values’ of the concepts measured, a large body of research has shown that seemingly irrelevant question characteristics influence how

Strategies for the plasma position and shape control in IGNITOR

International Nuclear Information System (INIS)

Villone, F.; Albanese, R.; Ambrosino, G.; Pironti, A.; Rubinacci, G.; Ramogida, G.; Alladio, F.; Bombarda, F.; Coletti, A.; Cucchiaro, A.; Maddaluno, G.; Pizzicaroli, G.; Pizzuto, A.; Roccella, M.; Santinelli, M.; Coppi, B.

2007-01-01

The capability of the poloidal field coil system, as presently designed, to provide an effective vertical stabilization of the plasma in the IGNITOR machine has been investigated using the CREATE L response model. An optimization of the vertical position control strategy has been carried out and the most effective coil combination has been selected to stabilize the plasma while fulfilling engineering constraints on the coils and minimizing the required power and voltage. The growth rate of the vertical instability and the power required by the active stabilization system has been estimated with this model. The possible failure of the relevant electromagnetic diagnostics has been taken into account, evaluating the robustness of the plasma position reconstruction strategy. A realistic description of the power supply system has permitted to carry out the optimization of the proportional-integrative-derivative (PID) controller, both with a voltage and a current loop control scheme. An assessment of the requirements for the plasma cross section shape control has been carried out considering perturbations of the plasma global parameters independent of each other and showing that the undesired shape modification rejection is possible with the present PFC and power supply system. The PF coils have been rated relative to their capability to restore shape modifications due to different plasma disturbances. The most effective coil combination, that minimizes recovery time and voltage required, has been identified

A randomised controlled trial in comparing maternal and neonatal outcomes between hands-and-knees delivery position and supine position in China.

Science.gov (United States)

Zhang, Hongyu; Huang, Shurong; Guo, Xiaolan; Zhao, Ningning; Lu, Yujing; Chen, Min; Li, Yingxia; Wu, Junqin; Huang, Lihua; Ma, Fenglan; Yang, Yuhong; Zhang, Xiaoli; Zhou, Xiaoyu; Guo, Renfei; Cai, Wenzhi

2017-07-01

the supine position is the most frequently offered for birth delivery in China and many other countries, but the hands-and-knees position is now gaining prominence with doctors in China. This study aims to examine the differences in maternal and neonatal outcomes among low-risk women who gave birth either in the hands-and-knees position or the supine position. a randomised controlled trial was conducted in 11 hospitals in China from May to December in 2012. In total, 1400 women were recruited and randomly allocated to either the experimental group (n=700, 446 completed the protocol) who delivered in hands-and-knees position and the control group (n=700, 440 completed the protocol) who delivered in supine position. Women who could not maintain the randomised position during the second stage of labour were allowed to withdraw from the study. The primary maternal outcome measured was rate of episiotomy. Secondary outcomes included degree of perineum laceration, rate of emergency caesarean section, rate of shoulder dystocia, and duration of labour, postpartum bleeding, neonatal Apgar score, and the rate of neonatal asphyxia. Because outcome data were only collected for women who gave birth in the randomised position, per-protocol analyses were used to compare groups. The primary outcome, episiotomy, was also compared between groups using logistic regression adjusting for maternal age，gestational age at birth, whether the woman was primiparous, the process of second stage of labour and birthweight. as compared with the control group, the experimental group had lower rates of episiotomy and second-degree perineum laceration (including episiotomy), and higher rates of intact perineum and first-degree perineum laceration, with a longer duration of second stage of labour. No significant differences were found in the amount of postpartum bleeding, shoulder dystocia, neonatal asphyxia and neonatal Apgar scores at 1minute and 5minutes. Adjusted for maternal age, gestational

Pull-pull position control of dual motor wire rope transmission.

Science.gov (United States)

Guo, Quan; Jiao, Zongxia; Yan, Liang; Yu, Qian; Shang, Yaoxing

2016-08-01

Wire rope transmission is very efficient because of the small total moving object mass. The wire rope could only transmit pulling force. Therefore it has to be kept in a tightened state during transmission; in high speed applications the dynamic performance depends on the rope's stiffness, which can be adjusted by the wire rope tension. To improve the system dynamic performance output, this paper proposes a novel pull-pull method based on dual motors connected by wire ropes, for precise, high speed position control applications. The method can regulate target position and wire rope tension simultaneously. Wire ropes remain in a pre-tightening state at all times, which prevents the influence of elasticity and reduces the position tracking error in the changing direction process. Simulations and experiments were conducted; the results indicate that both position precision and superior dynamic performance can be synchronously achieved. The research is relevant to space craft precision pointing instruments.

Development of a mcirocontroller to the positioning control of an ionization chamber

International Nuclear Information System (INIS)

Manfrini, Francisco A.L.; Rocha, Cristina S.C.; Reis, Renato J.; Oliveira, Arno Heeren de

2007-01-01

It was developed a microcontroller to positioning of ionization chamber with high precision. Considering the high sensitivity of intensity of radiation with the distance source-detector is necessary to develop an eletronics able to control position the detector with high precision. The project was based on microcontroller AT 89S8252 of Atmel company. (author)

A switched energy saving position controller for variable-pressure electro-hydraulic servo systems.

Science.gov (United States)

Tivay, Ali; Zareinejad, Mohammad; Rezaei, S Mehdi; Baghestan, Keivan

2014-07-01

The electro-hydraulic servo system (EHSS) demonstrates a relatively low level of efficiency compared to other available actuation methods. The objective of this paper is to increase this efficiency by introducing a variable supply pressure into the system and controlling this pressure during the task of position tracking. For this purpose, an EHSS structure with controllable supply pressure is proposed and its dynamic model is derived from the basic laws of physics. A switching control structure is then proposed to control both the supply pressure and the cylinder position at the same time, in a way that reduces the overall energy consumption of the system. The stability of the proposed switching control system is guaranteed by proof, and its performance is verified by experimental testing. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

Developing critical thinking through Socratic Questioning: An Action Research Study

Directory of Open Access Journals (Sweden)

Husniah Sahamid

2016-07-01

Full Text Available An action research study was conducted among 24 Form 4 level Malaysian students, aged 16. The duration of the study was five months and constituted 16 one-hour literature lessons (short stories from the secondary level Malaysian English Language Upper Secondary Level school syllabus. This paper describes my experience as a teacher-as-researcher to assist students to respond to teacher questions through Paul’s (1993 model of Socratic Questioning which claims to develop students’ critical thinking. Data was collected through researcher’s field notes, students’ writing tasks and student interviews which were analysed after each cycle of the action research study. Changes and adaptations were consequently made based on the data collected and upon teacher reflection to improve practice. The results of this study indicate that repeated practice of Socratic Questioning had a positive effect on student responses and writing tasks. Some of the factors affecting students’ performance included students’ language proficiency, weak reading ability and students’ anxiety towards the questioning method. These issues had to be addressed and dealt with, before Socratic Questioning could be properly implemented in the classroom. Keywords: Socratic questioning, teacher questioning, critical thinking, action research

Concept mapping improves academic performance in problem solving questions in biochemistry subject.

Science.gov (United States)

Baig, Mukhtiar; Tariq, Saba; Rehman, Rehana; Ali, Sobia; Gazzaz, Zohair J

2016-01-01

To assess the effectiveness of concept mapping (CM) on the academic performance of medical students' in problem-solving as well as in declarative knowledge questions and their perception regarding CM. The present analytical and questionnaire-based study was carried out at Bahria University Medical and Dental College (BUMDC), Karachi, Pakistan. In this analytical study, students were assessed with problem-solving questions (A-type MCQs), and declarative knowledge questions (short essay questions), and 50% of the questions were from the topics learned by CM. Students also filled a 10-item, 3-point Likert scale questionnaire about their perception regarding the effectiveness of the CM approach, and two open-ended questions were also asked. There was a significant difference in the marks obtained in those problem-solving questions, which were learned by CM as compared to those topics which were taught by the traditional lectures (pacademic performance in problem solving but not in declarative knowledge questions. Students' perception about the effectiveness of CM was overwhelmingly positive.

Asymmetric positive feedback loops reliably control biological responses.

Science.gov (United States)

Ratushny, Alexander V; Saleem, Ramsey A; Sitko, Katherine; Ramsey, Stephen A; Aitchison, John D

2012-04-24

Positive feedback is a common mechanism enabling biological systems to respond to stimuli in a switch-like manner. Such systems are often characterized by the requisite formation of a heterodimer where only one of the pair is subject to feedback. This ASymmetric Self-UpREgulation (ASSURE) motif is central to many biological systems, including cholesterol homeostasis (LXRα/RXRα), adipocyte differentiation (PPARγ/RXRα), development and differentiation (RAR/RXR), myogenesis (MyoD/E12) and cellular antiviral defense (IRF3/IRF7). To understand why this motif is so prevalent, we examined its properties in an evolutionarily conserved transcriptional regulatory network in yeast (Oaf1p/Pip2p). We demonstrate that the asymmetry in positive feedback confers a competitive advantage and allows the system to robustly increase its responsiveness while precisely tuning the response to a consistent level in the presence of varying stimuli. This study reveals evolutionary advantages for the ASSURE motif, and mechanisms for control, that are relevant to pharmacologic intervention and synthetic biology applications.

Precision position control of servo systems using adaptive back-stepping and recurrent fuzzy neural networks

International Nuclear Information System (INIS)

Kim, Han Me; Kim, Jong Shik; Han, Seong Ik

2009-01-01

To improve position tracking performance of servo systems, a position tracking control using adaptive back-stepping control(ABSC) scheme and recurrent fuzzy neural networks(RFNN) is proposed. An adaptive rule of the ABSC based on system dynamics and dynamic friction model is also suggested to compensate nonlinear dynamic friction characteristics. However, it is difficult to reduce the position tracking error of servo systems by using only the ABSC scheme because of the system uncertainties which cannot be exactly identified during the modeling of servo systems. Therefore, in order to overcome system uncertainties and then to improve position tracking performance of servo systems, the RFNN technique is additionally applied to the servo system. The feasibility of the proposed control scheme for a servo system is validated through experiments. Experimental results show that the servo system with ABS controller based on the dual friction observer and RFNN including the reconstruction error estimator can achieve desired tracking performance and robustness

Asynchronous L1-gain control of uncertain switched positive linear systems with dwell time.

Science.gov (United States)

Li, Yang; Zhang, Hongbin

2018-04-01

In this paper, dwell time (DT) stability, L 1 -gain performance analysis and asynchronous L 1 -gain controller design problems of uncertain switched positive linear systems (SPLSs) are investigated. Via a time-scheduled multiple linear co-positive Lyapunov function (TSMLCLF) approach, convex sufficient conditions of DT stability and L 1 -gain performance of SPLSs with interval and polytopic uncertainties are presented. Furthermore, by utilizing the feature that the TSMLCLF keeps decreasing even if the controller is running asynchronously with the system, the asynchronous L 1 -gain controller design problem of SPLSs with interval and polytopic uncertainties is investigated. Convex sufficient conditions of the existence of time-varying asynchronous state-feedback controller which can ensure the closed-loop system's positivity, stability and L 1 -gain performance are established, and the controller gain matrices can be calculated instantaneously online. The obtained L 1 -gain in the paper is standard. All the results are presented in terms of linear programming. A practical example is provided to show the effectiveness of the results. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.

Effects of communication skills training and a Question Prompt Sheet to improve communication with older cancer patients: a randomized controlled trial

NARCIS (Netherlands)

van Weert, J.C.M.; Jansen, J.; Spreeuwenberg, P.M.M.; van Dulmen, S.; Bensing, J.M.

2011-01-01

A randomized pre- and post-test control group design was conducted in 12 oncology wards to investigate the effectiveness of an intervention, existing of a communication skills training with web-enabled video feedback and a Question Prompt Sheet (QPS), which aimed to improve patient education to

Effects of communication skills training and a Question Prompt Sheet to improve communication with older cancer patients: a randomized controlled trial.

NARCIS (Netherlands)

Weert, J.C.M. van; Jansen, J.; Spreeuwenberg, P.M.M.; Dulmen, S. van; Bensing, J.M.

2011-01-01

A randomized pre- and post-test control group design was conducted in 12 oncology wards to investigate the effectiveness of an intervention, existing of a communication skills training with web-enabled video feedback and a Question Prompt Sheet (QPS), which aimed to improve patient education to

"What's the difference?" women's wheelchair basketball, reverse integration, and the question(ing) of disability.

Science.gov (United States)

Spencer-Cavaliere, Nancy; Peers, Danielle

2011-10-01

The inclusion of able-bodied athletes within disability sport, a phenomenon known as reverse integration, has sparked significant debate within adapted physical activity. Although researchers and practitioners have taken up positions for or against reverse integration, there is a lack of supporting research on the experiences of athletes who already play in such settings. In this study, we explore how competitive female athletes who have a disability experience reverse integration in Canadian wheelchair basketball. Athletic identity was used as the initial conceptual framework to guide semistructured interviews with nine participants. The results suggest that participation in this context contributed to positive athletic identities. Interviews also pointed to the unexpected theme of "what's the difference?" that this sporting context provided a space for the questioning and creative negotiation of the categories of disability and able-bodiedness. Methodologically, this paper also explores the possibilities and challenges of inter- worldview and insider-outsider research collaboration.

Answering Key Fuel Cycle Questions

International Nuclear Information System (INIS)

Piet, S.J.; Dixon, B.W.; Bennett, R.G.; Smith, J.D.; Hill, R.N.

2004-01-01

Given the range of fuel cycle goals and criteria, and the wide range of fuel cycle options, how can the set of options eventually be narrowed in a transparent and justifiable fashion? It is impractical to develop all options. We suggest an approach that starts by considering a range of goals for the Advanced Fuel Cycle Initiative (AFCI) and then posits seven questions, such as whether Cs and Sr isotopes should be separated from spent fuel and, if so, what should be done with them. For each question, we consider which of the goals may be relevant to eventually providing answers. The AFCI program has both ''outcome'' and ''process'' goals because it must address both waste already accumulating as well as completing the fuel cycle in connection with advanced nuclear power plant concepts. The outcome objectives are waste geologic repository capacity and cost, energy security and sustainability, proliferation resistance, fuel cycle economics, and safety. The process objectives are rea diness to proceed and adaptability and robustness in the face of uncertainties

Analysis of magnetic field and hysteresis of reed switches for control rod position indicator of SMART CEDM

International Nuclear Information System (INIS)

Yoo, J. W.; Kim, J. H.; Heo, H.; Kim, J. I.; Jang, M. H.

2002-01-01

The reliability and accuracy of the information on control rod position are very important to the reactor safety and the design of the core protection system. A survey on the RSPT(Reed Switch Position Transmitter) type control rod position indication system and its actual implementation in the exiting nuclear power plants in Korea was performed first. The control rod position indicator having the high performance for SMART was developed on the basis of RSPT technology identified through the survey. The hysteresis of reed switches is one of the important factors in a repeat accuracy of control rod position indication. In this study, the hysteresis of reed switches is introduced and the design method using the magnetic analysis of reed switches in presented

Positive Analysis of Invasive Species Control as a Dynamic Spatial Process

OpenAIRE

Buyuktahtakin, Esra; Feng, Zhuo; Olsson, Aaryn; Frisvold, George B.; Szidarovszky, Ferenc

2010-01-01

This paper models control of invasive buffelgrass (Pennisetum ciliare), a fire-prone African bunchgrass spreading rapidly across the southern Arizona desert as a spatial dynamic process. Buffelgrass spreads over a gridded landscape. Weed carrying capacity, treatment costs, and damages vary over grid cells. Damage from buffelgrass depends on its spatial distribution in relation to valued resources. We conduct positive analysis of recommended heuristic strategies for buffelgrass control, evalua...

Affective processing in positive schizotypy: Loose control of social-emotional information.

Science.gov (United States)

Papousek, Ilona; Weiss, Elisabeth M; Mosbacher, Jochen A; Reiser, Eva M; Schulter, Günter; Fink, Andreas

2014-10-30

Behavioral studies suggested heightened impact of emotionally laden perceptual input in schizophrenia spectrum disorders, in particular in patients with prominent positive symptoms. De-coupling of prefrontal and posterior cortices during stimulus processing, which is related to loosening of control of the prefrontal cortex over incoming affectively laden information, may underlie this abnormality. Pre-selected groups of individuals with low versus high positive schizotypy (lower and upper quartile of a large screening sample) were tested. During exposure to auditory displays of strong emotions (anger, sadness, cheerfulness), individuals with elevated levels of positive schizotypal symptoms showed lesser prefrontal-posterior coupling (EEG coherence) than their symptom-free counterparts (right hemisphere). This applied to negative emotions in particular and was most pronounced during confrontation with anger. The findings indicate a link between positive symptoms and a heightened impact particularly of threatening emotionally laden stimuli which might lead to exacerbation of positive symptoms and inappropriate behavior in interpersonal situations. Copyright © 2014 Elsevier Inc. All rights reserved.

Design and analysis of plasma position and shape control in superconducting tokamak JT-60SC

Energy Technology Data Exchange (ETDEWEB)

Matsukawa, M. E-mail: matsukaw@naka.jaeri.go.jp; Ishida, S.; Sakasai, A.; Urata, K.; Senda, I.; Kurita, G.; Tamai, H.; Sakurai, S.; Miura, Y.M.; Masaki, K.; Shimada, K.; Terakado, T

2003-09-01

The analyses of the plasma position and shape control in the superconducting tokamak JT-60SC in JAERI are presented. The vacuum vessel and stabilizing plates located closely to the plasma are modeled in 3 dimension, and we can take into account the large ports in the vacuum vessel. The linear numerical model used in the design for the plasma feedback control system is based on Grad-Shafranov equation, which allows the plasma surface deformation. For a slower control of the plasma shape, the superconducting equilibrium field (EF) coils outside toroidal field coils are used, while for a fast control of the plasma position, in-vessel normal conducting coils (IV coil) are used. It is shown that the available loop voltages of the EF and IV coils are very limited, but there are sufficient accuracy and acceptable response time of plasma position and shape control.

Design and analysis of plasma position and shape control in superconducting tokamak JT-60SC

International Nuclear Information System (INIS)

Matsukawa, M.; Ishida, S.; Sakasai, A.; Urata, K.; Senda, I.; Kurita, G.; Tamai, H.; Sakurai, S.; Miura, Y.M.; Masaki, K.; Shimada, K.; Terakado, T.

2003-01-01

The analyses of the plasma position and shape control in the superconducting tokamak JT-60SC in JAERI are presented. The vacuum vessel and stabilizing plates located closely to the plasma are modeled in 3 dimension, and we can take into account the large ports in the vacuum vessel. The linear numerical model used in the design for the plasma feedback control system is based on Grad-Shafranov equation, which allows the plasma surface deformation. For a slower control of the plasma shape, the superconducting equilibrium field (EF) coils outside toroidal field coils are used, while for a fast control of the plasma position, in-vessel normal conducting coils (IV coil) are used. It is shown that the available loop voltages of the EF and IV coils are very limited, but there are sufficient accuracy and acceptable response time of plasma position and shape control

Hydrostatic control system for the height position of the JINR synchrotron

International Nuclear Information System (INIS)

Vasyutinskij, I.Yu.; Zinov'ev, L.P.; Karpov, I.I.

1978-01-01

Hydrostatic system with remote read-out is created for a more operative control of height position of synchrocyclotrone electromagnet. 3 hydrostatic heads with electrocontact registration of liquid level position were mounted on every electromagnet quadrant. The heads are placed under the magnet in centers of survey channel of the foundation and are switched on in series. Teh schemes of the main system units are given. The order of assembling and adjustment of hydrostatic system elements of the accelerator is described

Asymmetric Fuzzy Control of a Positive and Negative Pneumatic Pressure Servo System

Science.gov (United States)

Yang, Gang; Du, Jing-Min; Fu, Xiao-Yun; Li, Bao-Ren

2017-11-01

The pneumatic pressure control systems have been used in some fields. However, the researches on pneumatic pressure control mainly focus on constant pressure regulation. Poor dynamic characteristics and strong nonlinearity of such systems limit its application in the field of pressure tracking control. In order to meet the demand of generating dynamic pressure signal in the application of the hardware-in-the-loop simulation of aerospace engineering, a positive and negative pneumatic pressure servo system is provided to implement dynamic adjustment of sealed chamber pressure. A mathematical model is established with simulation and experiment being implemented afterwards to discuss the characteristics of the system, which shows serious asymmetry in the process of charging and discharging. Based on the analysis of the system dynamics, a fuzzy proportional integral derivative (PID) controller with asymmetric fuzzy compensator is proposed. Different from conventional adjusting mechanisms employing the error and change in error of the controlled variable as input parameters, the current chamber pressure and charging or discharging state are chosen as inputs of the compensator, which improves adaptability. To verify the effectiveness and performance of the proposed controller, the comparison experiments tracking sinusoidal and square wave commands are conducted. Experimental results show that the proposed controller can obtain better dynamic performance and relatively consistent control performance across the scope of work (2-140 kPa). The research proposes a fuzzy control method to overcome asymmetry and enhance adaptability for the positive and negative pneumatic pressure servo system.

FRF based position controller design through system identification for A hydraulic cylinder

Energy Technology Data Exchange (ETDEWEB)

Seo, Hyoung Kyu; Kim, Dong Hwan [Dept. of Mechanical Design and Robot Engineering, Seoul National University of Science and Technology, Seoul (Korea, Republic of); Park, Jong Won [Reliability Assessment Center, Korea Institute of Machinery and Materials, Daejeon (Korea, Republic of)

2015-11-15

In this study, we have focused on the design of a controller and an operating program for the operation of the hydraulic actuators used in a shaker. To control the motion of the shaker accurately, the position of each hydraulic cylinder should be controlled precisely even under an uncertain environment. For this purpose, we have suggested a control algorithm using an FRF (frequency response function) based control which senses the behavior of the actuator in advance, calculates a transfer function through the system identification method, and provides the final control input. The experimental results on the performance of this system were compared with that of a simple PID control algorithm.

Neural correlates of preparatory and regulatory control over positive and negative emotion.

Science.gov (United States)

Seo, Dongju; Olman, Cheryl A; Haut, Kristen M; Sinha, Rajita; MacDonald, Angus W; Patrick, Christopher J

2014-04-01

This study used functional magnetic resonance imaging to investigate brain activation during preparatory and regulatory control while participants (N = 24) were instructed either to simply view or decrease their emotional response to, pleasant, neutral or unpleasant pictures. A main effect of emotional valence on brain activity was found in the right precentral gyrus, with greater activation during positive than negative emotion regulation. A main effect of regulation phase was evident in the bilateral anterior prefrontal cortex (PFC), precuneus, posterior cingulate cortex, right putamen and temporal and occipital lobes, with greater activity in these regions during preparatory than regulatory control. A valence X regulation interaction was evident in regions of ventromedial PFC and anterior cingulate cortex, reflecting greater activation while regulating negative than positive emotion, but only during active emotion regulation (not preparation). Conjunction analyses revealed common brain regions involved in differing types of emotion regulation including selected areas of left lateral PFC, inferior parietal lobe, temporal lobe, right cerebellum and bilateral dorsomedial PFC. The right lateral PFC was additionally activated during the modulation of both positive and negative valence. Findings demonstrate significant modulation of brain activity during both preparation for, and active regulation of positive and negative emotional states.

Effects of Regulatory Self-Questioning on Secondary-Level Students' Problem-Solving Performance

Science.gov (United States)

Pate, Michael L.; Miller, Greg

2011-01-01

A randomized posttest-only control group experimental design was used to determine the effects of regulatory self-questioning on secondary-level career and technical education students' electrical circuit theory test scores. Students who participated in the self-questioning group were asked to answer a list of regulatory questions as they solved…

The effect of A teacher questioning strategy training program on teaching behavior, student achievement, and retention

Science.gov (United States)

Otto, Paul B.; Schuck, Robert F.

The use of questions in the classroom has been employed throughout the recorded history of teaching. One still hears the term Socratic method during discussions of questioning procedures. The use of teacher questions is presently viewed as a viable procedure for effective instruction. This study was conducted to investigate the feasibility of training teachers in the use of a questioning technique and the resultant effect upon student learning. The Post-Test Only Control Group Design was used in randomly assigning teachers and students to experimental and control groups. A group of teachers was trained in the use of a specific questioning technique. Follow-up periodic observations were made of questioning technique behavior while teaching science units to groups of students. Post-unit achievement tests were administered to the student groups to obtain evidence of a relationship between the implementation of specific types of teacher questions and student achievement and retention. Analysis of observation data indicated a higher use of managerial and rhetorical questions by the control group than the experimental group. The experimental group employed a greater number of recall and data gathering questions as well as higher order data processing and data verification type questions. The student posttest achievement scores for both units of instruction were greater for the experimental groups than for the control groups. The retention scores for both units were Beater for the experimental groups than for the control groups.

Positive parity states in 153Ho and the question of shape coexistence

International Nuclear Information System (INIS)

Chakraborty, A.; Ray, Sudatta; Ray, I.; Pradhan, M.K.; Raut, R.; Goswami, A.; Banerjee, P.; Mukherjee, A.; Bhattacharya, S.; Saha Sarkar, M.; Dey, Gautam; Krishichayan; Kshetri, Ritesh; Ganguly, S.; Ray Basu, M.; Ganguly, G.; Ghugre, S.S.; Sinha, A.K.; Basu, S.K.; Sarkar, S.

2008-01-01

In the present work the existing level scheme have been extended from the experimental data and studied specifically the positive parity states in 153 Ho theoretically to understand the issue of shape coexistence in this nucleus

BP neural network tuned PID controller for position tracking of a pneumatic artificial muscle.

Science.gov (United States)

Fan, Jizhuang; Zhong, Jun; Zhao, Jie; Zhu, Yanhe

2015-01-01

Although Pneumatic Artificial Muscle (PAM) has a promising future in rehabilitation robots, it's difficult to realize accurate position control due to its highly nonlinear properties. This paper deals with position control of PAM. To describe the hysteresis inside PAM, a polynomial based phenomenological function is developed. Based on the phenomenological model for PAM and analysis of pressure dynamics within PAM, an adaptive cascade controller is proposed. Both outer loop and inner loop employ BP Neural Network tuned PID algorithm. The outer loop is to handle high nonlinearities and unmodeled dynamics of PAM, while the inner loop is responsible for nonlinearities caused by pressure dynamics. Experimental results show high tracking accuracy as compared with a convention PID controller. The proposed controller is effective in improving performance of PAM and will be implemented in a rehabilitation robot.

Theoretical and experimental investigation of position-controlled semi-active friction damper for seismic structures

Science.gov (United States)

Lu, Lyan-Ywan; Lin, Tzu-Kang; Jheng, Rong-Jie; Wu, Hsin-Hsien

2018-01-01

A semi-active friction damper (SAFD) can be employed for the seismic protection of structural systems. The effectiveness of an SAFD in absorbing seismic energy is usually superior to that of its passive counterpart, since its slip force can be altered in real time according to structural response and excitation. Most existing SAFDs are controlled by adjusting the clamping force applied on the friction interface. Thus, the implementation of SAFDs in practice requires precision control of the clamping force, which is usually substantially larger than the slip force. This may increase the implementation complexity and cost of SAFDs. To avoid this problem, this study proposes a novel position-controlled SAFD, named the leverage-type controllable friction damper (LCFD). The LCFD system combines a traditional passive friction damper and a leverage mechanism with a movable central pivot. By simply controlling the pivot position, the damping force generated by the LCFD system can be adjusted in real time. In order to verify the feasibility of the proposed SAFD, a prototype LCFD was tested by using a shaking table. The test results demonstrate that the equivalent friction force and hysteresis loop of the LCFD can be regulated by controlling the pivot position. By considering 16 ground motions with two different intensities, the adaptive feature of the LCFD for seismic structural control is further demonstrated numerically.

Method of improving heterogeneous oil reservoir polymer flooding effect by positively-charged gel profile control

Science.gov (United States)

Zhao, Ling; Xia, Huifen

2018-01-01

The project of polymer flooding has achieved great success in Daqing oilfield, and the main oil reservoir recovery can be improved by more than 15%. But, for some strong oil reservoir heterogeneity carrying out polymer flooding, polymer solution will be inefficient and invalid loop problem in the high permeability layer, then cause the larger polymer volume, and a significant reduction in the polymer flooding efficiency. Aiming at this problem, it is studied the method that improves heterogeneous oil reservoir polymer flooding effect by positively-charged gel profile control. The research results show that the polymer physical and chemical reaction of positively-charged gel with the residual polymer in high permeability layer can generate three-dimensional network of polymer, plugging high permeable layer, and increase injection pressure gradient, then improve the effect of polymer flooding development. Under the condition of the same dosage, positively-charged gel profile control can improve the polymer flooding recovery factor by 2.3∼3.8 percentage points. Under the condition of the same polymer flooding recovery factor increase value, after positively-charged gel profile control, it can reduce the polymer volume by 50 %. Applying mechanism of positively-charged gel profile control technology is feasible, cost savings, simple construction, and no environmental pollution, therefore has good application prospect.

The constrained control of force and position in multi-joint movements.

Science.gov (United States)

van Ingen Schenau, G J; Boots, P J; de Groot, G; Snackers, R J; van Woensel, W W

1992-01-01

In many arm or leg movements the hand or foot has to exert an external force on the environment. Based on an inverse dynamical analysis of cycling, it is shown that the distribution of net moments in the joints needed to control the direction of the external force is often opposite to the direction of joint displacements associated with this task. Kinetic and kinematic data were obtained from five experienced cyclists during ergometer cycling by means of film analysis and pedal force measurement. An inverse dynamic analysis, based on a linked segments model, yielded net joint moments, joint powers and muscle shortening velocities of eight leg muscles. Activation patterns of the muscles were obtained by means of surface electromyography. The results show that the transfer of rotations in hip, knee and ankle joints into the translation of the pedal is constrained by conflicting requirements. This occurs between the joint moments necessary to contribute to joint power and the moments necessary to establish a direction of the force on the pedal which allows this force to do work on the pedal. Co-activation of mono-articular agonists and their bi-articular antagonists appear to provide a unique solution for these conflicting requirements: bi-articular muscles appear to be able to control the desired direction of the external force on the pedal by adjusting the relative distribution of net moments over the joints while mono-articular muscles appear to be primarily activated when they are in the position to shorten and thus to contribute to positive work. Examples are given to illustrate the universal nature of this constrained control of force (external) and position (joint). Based on this study and published data it is suggested that different processes may underlie the organization of the control of mono- and bi-articular muscles.

Means of Question-Answer Interaction for Collaborative Development Activity

Directory of Open Access Journals (Sweden)

Petr Sosnin

2009-01-01

Full Text Available The key problem of successful developing of the software intensive system (SIS is adequate conceptual interactions of stakeholders at the early stages of designing. Nowadays the success of development is extremely low. It can be increased with using artificial intelligence (AI means including models of reasoning supported by the human-computer interaction in collaborative development activity. In this paper, a number of question-answer means for modeling reasoning are suggested. Such kind of means is defined and implemented in order to get effects of integrating the collective reasoning for their positive influence on the intellectual activity of designers. Question-answer means are arranged as a specialized processor opening the possibility to question-answer programming of the tasks on the conceptual stage of designing. Suggested and investigated means can be used for solving any complicated task.

Control rod position fault diagnosis and its software realization of pressurized water reactor

International Nuclear Information System (INIS)

Chang Zhengke; Shao Dinghong

2004-11-01

PLC software is adopted in the Rod Position Monitoring System of QS2NPS. By this software, the position of control rods can be monitored in real time, the abnormal phenomena can be identified immediately, the correctness and timeliness of fault diagnosis are improved remarkably. the identification and recordance of rod position fault, the performance validation of measure channel are realized also. The function and effect of this software are introduced. (authors)

Guaranteed Cost Finite-Time Control of Fractional-Order Positive Switched Systems

Directory of Open Access Journals (Sweden)

Leipo Liu

2017-01-01

Full Text Available The problem of guaranteed cost finite-time control of fractional-order positive switched systems (FOPSS is considered in this paper. Firstly, a new cost function is defined. Then, by constructing linear copositive Lyapunov functions and using the average dwell time (ADT approach, a state feedback controller and a static output feedback controller are constructed, respectively, and sufficient conditions are derived to guarantee that the corresponding closed-loop systems are guaranteed cost finite-time stable (GCFTS. Such conditions can be easily solved by linear programming. Finally, two examples are given to illustrate the effectiveness of the proposed method.

Friction-resilient position control for machine tools—Adaptive and sliding-mode methods compared

DEFF Research Database (Denmark)

Papageorgiou, Dimitrios; Blanke, Mogens; Niemann, Hans Henrik

2018-01-01

Robust trajectory tracking and increasing demand for high-accuracy tool positioning have motivated research in advanced control design for machine tools. State-of-the-art industry solutions employ cascades of Proportional (P) and Proportional-Integral (PI) controllers for closed-loop servo contro...

Position and force control of a vehicle with two or more steerable drive wheels

Energy Technology Data Exchange (ETDEWEB)

Reister, D.B.; Unseren, M.A.

1992-10-01

When a vehicle with two or more steerable drive wheels is traveling in a circle, the motion of the wheels is constrained. The wheel translational velocity divided by the radius to the center of rotation must be the same for all wheels. When the drive wheels are controlled independently using position control, the motion of the wheels may violate the constraints and the wheels may slip. Consequently, substantial errors can occur in the orientation of the vehicle. A vehicle with N drive wheels has (N - 1) constraints and one degree of freedom. We have developed a new approach to the control of a vehicle with N steerable drive wheels. The novel aspect of our approach is the use of force control. To control the vehicle, we have one degree of freedom for the position on the circle and (N - 1) forces that can be used to reduce errors. Recently, Kankaanranta and Koivo developed a control architecture that allows the force and position degrees of freedom to be decoupled. In the work of Kankaanranta and Koivo the force is an exogenous input. We have made the force endogenous by defining the force in terms of the errors in satisfying the rigid body kinematic constraints. We have applied the control architecture to the HERMIES-III robot and have measured a dramatic reduction in error (more than a factor of 20) compared to motions without force control.

tDCS over the left prefrontal cortex enhances cognitive control for positive affective stimuli.

Science.gov (United States)

Vanderhasselt, Marie-Anne; De Raedt, Rudi; Brunoni, Andre R; Campanhã, Camila; Baeken, Chris; Remue, Jonathan; Boggio, Paulo S

2013-01-01

Transcranial Direct Current Stimulation (tDCS) is a neuromodulation technique with promising results for enhancing cognitive information processes. So far, however, research has mainly focused on the effects of tDCS on cognitive control operations for non-emotional material. Therefore, our aim was to investigate the effects on cognitive control considering negative versus positive material. For this sham-controlled, within-subjects study, we selected a homogeneous sample of twenty-five healthy participants. By using behavioral measures and event related potentials (ERP) as indexes, we aimed to investigate whether a single session of anodal tDCS of the left dorsolateral prefrontal cortex (DLPFC) would have specific effects in enhancing cognitive control for positive and negative valenced stimuli. After tDCS over the left DLPFC (and not sham control stimulation), we observed more negative N450 amplitudes along with faster reaction times when inhibiting a habitual response to happy compared to sad facial expressions. Gender did not influence the effects of tDCS on cognitive control for emotional information. In line with the Valence Theory of side-lateralized activity, this stimulation protocol might have led to a left dominant (relative to right) prefrontal cortical activity, resulting in augmented cognitive control specifically for positive relative to negative stimuli. To verify that tDCS induces effects that are in line with all aspects of the well known Valence Theory, future research should investigate the effects of tDCS over the left vs. right DLPFC on cognitive control for emotional information.

Position control of a floating nuclear power plant

International Nuclear Information System (INIS)

Motohashi, K.; Hamamoto, T.; Sasaki, R.; Kojima, M.

1993-01-01

In spite of the increasing demand of electricity in Japan, the sites of nuclear power plants suitable for conventional seismic regulations become severely limited. Under these circumstances, several types of advanced siting technology have been developed. Among them, floating power plants have a great advantage of seismic isolation that leads to the seismic design standardization and factory fabrication. The feasibility studies or preliminary designs of floating power plants enclosed by breakwaters in the shallow sea have been carried out last two decades in U.S. and Japan. On the other hand, there are few investigations on the dynamic behavior of floating power plants in the deep sea. The offshore floating nuclear power plants have an additional advantage in that large breakwaters are not required, although the safety checking is inevitable against wind-induced waves. The tension-leg platforms which have been constructed for oil drilling in the deep sea seem to be a promising offshore siting technology of nuclear power plants. The tension-leg mooring system can considerably restrain the heave and pitch of a floating power plant because of significant stiffness in the vertical direction. Different from seismic effects, wind-induced waves may be predicted in advance by making use of ocean weather forecasts using artificial satellites. According to the wave prediction, the position of the floating plant may be controlled by adjusting the water content in ballast tanks and the length of tension-legs before the expected load arrives. The position control system can reduce the wave force acting on the plant and to avoid the unfavorable response behavior of the plant. In this study a semi-submerged circular cylinder with tension-legs is considered as a mathematical model. The configuration of circular cylinder is effective because the dynamic behavior does not depend on incident wave directions. It is also unique in that it can obtain the closed-form solution of

Positioning of sensors for control of ventilation systems in broiler houses: a case study

Directory of Open Access Journals (Sweden)

Thayla Morandi Ridolfi de Carvalho Curi

Full Text Available ABSTRACT Ventilation systems are incorporated at intensive poultry farms to control environment conditions and thermal comfort of broilers. The ventilation system operates based on environmental data, particularly measured by sensors of temperature and relative humidity. Sensors are placed at different positions of the facility. Quality, number and positioning of the sensors are critical factors to achieve an efficient performance of the system. For this reason, a strategic positioning of the sensors associated to controllers could support the maintenance and management of the microclimate inside the facility. This research aims to identify the three most representative points for the positioning of sensors in order to support the ventilation system during the critical period from 12h00 to 15h00 on summer days. Temperature, relative humidity and wind speed were measured in four different tunnel ventilated barns at the final stage of the production cycle. The descriptive analysis was performed on these data. The Temperature and Humidity Index (THI was also calculated. Then, the geostatistical analysis of THI was performed by GS+ and the position of sensors was determined by ordinary kriging. The methodology was able to detect the most representative points for the positioning of sensors in a case study (southeastern Brazil. The results suggested that this strategic positioning would help controllers to obtain a better inference of the microclimate during the studied period (the hottest microclimate, considered critical in Brazil. In addition, these results allow developing a future road map for a decision support system based on 24 h monitoring of the ventilation systems in broiler houses.

A Comparison between Two Force-Position Controllers with Gravity Compensation Simulated on a Humanoid Arm

Directory of Open Access Journals (Sweden)

Giovanni Gerardo Muscolo

2013-01-01

Full Text Available The authors propose a comparison between two force-position controllers with gravity compensation simulated on the DEXTER bioinspired robotic arm. The two controllers are both constituted by an internal proportional-derivative (PD closed-loop for the position control. The force control of the two systems is composed of an external proportional (P closed-loop for one system (P system and an external proportional-integrative (PI closed-loop for the other system (PI system. The simulation tests performed with the two systems on a planar representation of the DEXTER, an eight-DOF bioinspired arm, showed that by varying the stiffness of the environment, with a correct setting of parameters, both systems ensure the achievement of the desired force regime and with great precision the desired position. The two controllers do not have large differences in performance when interacting with a lower stiffness environment. In case of an environment with greater rigidity, the PI system is more stable. The subsequent implementation of these control systems on the DEXTER robotic bioinspired arm gives guidance on the design and control optimisation of the arms of the humanoid robot named SABIAN.

Passive hybrid force-position control for tele-operation based on real-time simulation of a virtual mechanism

International Nuclear Information System (INIS)

Joly, L.; Andriot, C.

1995-01-01

Hybrid force-position control aims at controlling position and force in separate directions. It is particularly useful to perform certain robotic tasks. In tele-operation context, passivity is important because it ensures stability when the system interacts with any passive environment. In this paper, we propose an original approach to hybrid force-position control of a force reflecting tele-robot system. It is based on real-time simulation of a virtual mechanism corresponding to the task. the resulting control law is passive. Experiments on a 6 degrees of freedom tele-operation system consisting in following a bent pipe under several control modes validate the approach. (authors). 12 refs., 6 figs

Dynamics and feedback control of plasma equilibrium position in a tokamak

International Nuclear Information System (INIS)

Burenko, O.

1983-01-01

A brief history of the beginnings of nuclear fusion research involving toroidal closed-system magnetic plasma containment is presented. A tokamak machine is defined mathematically for the purposes of plasma equilibrium position perturbation analysis. The perturbation equations of a tokamak plasma equilibrium position are developed. Solution of the approximated perturbation equations is carried out. A unique, simple, and useful plasma displacement dynamics transfer function of a tokamak is developed. The dominant time constants of the dynamics transfer function are determined in a symbolic form. This symbolic form of the dynamics transfer function makes it possible to study the stability of a tokamak's plasma equilibrium position. Knowledge of the dynamics transfer function permits systematic syntheses of the required plasma displacement feedback control systems

Fiscal federalism, ethnic minorities and the national question in ...

African Journals Online (AJOL)

This study, using content analysis, examined the impact of fiscal federalism and the struggles of ethnic minority groups in the Niger Delta on the trajectories of the national question in Nigeria. It discovered a positive relationship between the changes in the fiscal structure and the aggravation of ethnic minorities' struggles.

Practical controller design for ultra-precision positioning of stages with a pneumatic artificial muscle actuator

Science.gov (United States)

Tang, T. F.; Chong, S. H.

2017-06-01

This paper presents a practical controller design method for ultra-precision positioning of pneumatic artificial muscle actuator stages. Pneumatic artificial muscle (PAM) actuators are safe to use and have numerous advantages which have brought these actuators to wide applications. However, PAM exhibits strong non-linear characteristics, and these limitations lead to low controllability and limit its application. In practice, the non-linear characteristics of PAM mechanism are difficult to be precisely modeled, and time consuming to model them accurately. The purpose of the present study is to clarify a practical controller design method that emphasizes a simple design procedure that does not acquire plants parameters modeling, and yet is able to demonstrate ultra-precision positioning performance for a PAM driven stage. The practical control approach adopts continuous motion nominal characteristic trajectory following (CM NCTF) control as the feedback controller. The constructed PAM driven stage is in low damping characteristic and causes severe residual vibration that deteriorates motion accuracy of the system. Therefore, the idea to increase the damping characteristic by having an acceleration feedback compensation to the plant has been proposed. The effectiveness of the proposed controller was verified experimentally and compared with a classical PI controller in point-to-point motion. The experiment results proved that the CM NCTF controller demonstrates better positioning performance in smaller motion error than the PI controller. Overall, the CM NCTF controller has successfully to reduce motion error to 3µm, which is 88.7% smaller than the PI controller.

Cervical Joint Position Sense in Hypobaric Conditions: A Randomized Double-Blind Controlled Trial.

Science.gov (United States)

Bagaianu, Diana; Van Tiggelen, Damien; Duvigneaud, N; Stevens, Veerle; Schroyen, Danny; Vissenaeken, Dirk; D'Hondt, Gino; Pitance, Laurent

2017-09-01

Well-adapted motor actions require intact and well-integrated information from all of the sensory systems, specifically the visual, vestibular, and somatosensory systems, including proprioception. Proprioception is involved in the sensorimotor control by providing the central nervous system with an updated body schema of the biomechanical and spatial properties of the body parts. With regard to the cervical spine, proprioceptive information from joint and muscle mechanoreceptors is integrated with vestibular and visual feedback to control head position, head orientation, and whole body posture. Postural control is highly complex and proprioception from joints is an important contributor to the system. Altitude has been used as a paradigm to study the mechanisms of postural control. Determining the mechanisms of postural control that are affected by moderate altitude is important as unpressurized aircrafts routinely operate at altitudes where hypoxia may be a concern. Deficits in motor performance arise when the reliance on proprioceptive feedback is abolished either experimentally or because of a disorder. As pilots require good neck motor control to counteract the weight of their head gear and proprioceptive information plays an important role in this process, the aim of this study was to determine if hypoxia at moderate altitudes would impair proprioception measured by joint position sense of the cervical spine in healthy subjects. Thirty-six healthy subjects (Neck Disability Index environment, a hypobaric chamber was used to simulate artificial moderate altitude. Head repositioning error was measured by asking the subject to perform a head-to-neutral task after submaximal flexion-extension and right/left rotation movements, and a head-to-target task, in which the subjects had to return to a 30° right and left rotation position. Exposure to artificial acute moderate altitude of 7,000 feet had no significant effects on cervical joint position sense measured by

Socratic Questioning-Guided Discovery

Directory of Open Access Journals (Sweden)

M. Hakan Türkçapar

2012-04-01

Full Text Available “Socratic Method” is a way of teaching philosophical thinking and knowledge by asking questions which was used by antique period greek philosopher Socrates. Socrates was teaching knowledge to his followers by asking questions and the conversation between them was named “Socratic Dialogues”. In this meaning, no novel knowledge is taught to the individual but only what is formerly known is reminded and rediscovered. The form of socratic questioning which is used during the process of cognitive behavioral therapy is known as Guided Discovery. In this method it is aimed to make the client notice the piece of knowledge which he could notice but is not aware with a series of questions. Socratic method or guided discovery consists of several steps which are: Identifying the problem by listening to the client and making reflections, finding alternatives by examining and evaluating, reidentification by using the newly found information and questioning the old distorted belief and reaching to a conclusion and applying it. Question types used during these procedures are, questions for gaining information, questions revealing the meanings, questions revealing the beliefs, questions about behaviours during the similar past experiences, analyse questions and analytic synthesis questions. In order to make the patient feel understood it is important to be empathetic and summarising the problem during the interview. In this text, steps of Socratic Questioning-Guided Discovery will be reviewed with sample dialogues after eachstep. [JCBPR 2012; 1(1.000: 15-20

Position automatic determination technology

International Nuclear Information System (INIS)

1985-10-01

This book tells of method of position determination and characteristic, control method of position determination and point of design, point of sensor choice for position detector, position determination of digital control system, application of clutch break in high frequency position determination, automation technique of position determination, position determination by electromagnetic clutch and break, air cylinder, cam and solenoid, stop position control of automatic guide vehicle, stacker crane and automatic transfer control.

Improving tokamak vertical position control in the presence of power supply voltage saturation

International Nuclear Information System (INIS)

Favez, J-Y; Lister, J B; Muellhaupt, Ph; Srinivasan, B

2005-01-01

The control of the current, position and shape of an elongated cross-section tokamak plasma is complicated by the so-called instability of the current vertical position. Linearized models all share the feature of a single unstable eigenmode, attributable to this vertical instability of the plasma equilibrium movement, and a large number of stable or marginally stable eigenmodes, attributable to zero or positive resistance in all other model circuit equations. Due to the size and therefore cost of the ITER tokamak, there will naturally be smaller margins in the poloidal field coil power supplies, implying that the feedback control will experience actuator saturation during large transients due to a variety of plasma disturbances. Current saturation is relatively benign, due to the integrating nature of the tokamak, resulting in a reasonable time horizon for strategically handling the approach to saturation which leads to the loss of one degree of freedom in the feedback control for each saturated coil. On the other hand, voltage saturation is produced by the feedback controller itself, with no intrinsic delay. This paper presents a feedback controller design approach which explicitly takes saturation of the power supply voltage into account when producing the power supply demand signals. We consider the vertically stabilizing part of the ITER controller (fast controller) with one power supply and therefore a single saturated input. We consider an existing ITER controller and enlarge its region of attraction to the full null controllable region by adding a continuous nonlinearity into the control. In a system with a single unstable eigenmode and a single stable eigenmode we have already provided a proof of the asymptotical stability of the closed loop system, and we have examined the performance of this new continuous nonlinear controller. We have subsequently extended this analysis to a system with a single eigenmode and multiple stable eigenmodes. The method

Studies on performances of the control system of plasma position and shape

International Nuclear Information System (INIS)

Aikawa, Hiroshi; Tsuzuki, Naohisa; Kimura, Toyoaki; Ogata, Atsushi; Ninomiya, Hiromasa

1978-09-01

Performance in the control system of plasma position and shape is determined by estimating the disturbing field, system functions and load variation of the controlled object. Various stray fields are considered as disturbing field. Plasma internal inductance and poloidal beta are taken into consideration as load variation of the controlled object. The required performance is obtained through considerations of plasma equilibrium, stability, impurity concentration and sensors accuracy. The results are described as requests to the poloidal power supply system. (author)

78 FR 979 - Petition for Positive Train Control Safety Plan Approval and System Certification of the...

Science.gov (United States)

2013-01-07

...] Petition for Positive Train Control Safety Plan Approval and System Certification of the Electronic Train... the Federal Railroad Administration (FRA) for Positive Train Control (PTC) Safety Plan (PTCSP) approval and system certification of the Electronic Train Management System (ETMS) as required by 49 U.S.C...

Development of three methods for control rod position monitoring based on fixed in-core neutron detectors

International Nuclear Information System (INIS)

Peng, Xingjie; Li, Qing; Wang, Kan

2015-01-01

Highlights: • Three methods are utilized separately to unfold the control rod position from the fixed in-core neutron detector measurements. • Fixed in-core neutron detector measurements are simulated by neutronics code SMART. • Numerical results show that all these methods can unfold the control rod position accurately. • Two correction strategies are proposed to correct the simulated fixed in-core detector signals. - Abstract: Nuclear reactor core power distribution on-line monitoring system is very important in core surveillance, and this system should have the ability to indicate some abnormal conditions, such as the unacceptable control rod misalignment. In this study, the methodologies of radial basis function neural network (RBFNN), group method of data handling (GMDH) and Levenberg–Marquardt (LM) algorithm are utilized separately to unfold the control rod position from the fixed in-core neutron detector measurements. For using these methods, a large number of in-core detector signals corresponding to various known rod positions are needed. These data can be generated by an advanced core calculation code. In this study, the neutronics code SMART was used. The simulation results show that all these methods can unfold the control rod position accurately, and the performance comparison shows that the regularized RBFNN performs best. Two correction strategies are proposed to correct the simulated fixed in-core detector signals and improve the rod position monitoring accuracy when there are mismatches between actual physical factors and modeled physical factors

Kept in His Care: The Role of Perceived Divine Control in Positive Reappraisal Coping

Directory of Open Access Journals (Sweden)

Reed T. DeAngelis

2017-07-01

Full Text Available A formidable body of literature suggests that numerous dimensions of religious involvement can facilitate productive coping. One common assumption in this field is that religious worldviews provide overarching frameworks of meaning by which to positively reinterpret stressors. The current study explicitly tests this assumption by examining whether perceived divine control—i.e., the notion that God controls the course and direction of one’s life—buffers the adverse effects of recent traumatic life events on one’s capacity for positive reappraisal coping. We analyze cross-sectional survey data from Vanderbilt University’s Nashville Stress and Health Study (2011–2014, a probability sample of non-Hispanic black and white adults aged 22 to 69 living in Davidson County, Tennessee (n = 1252. Findings from multivariate regression models confirm: (1 there was an inverse association between past-year traumatic life events and positive reappraisals; but (2 perceived divine control significantly attenuated this inverse association. Substantively, our findings suggest that people who believe God controls their life outcomes are better suited for positively reinterpreting traumatic experiences. Implications, limitations, and avenues for future research are discussed.

Assessing the quality of pharmacist answers to telephone drug information questions.

Science.gov (United States)

Woodward, C T; Stevenson, J G; Poremba, A

1990-04-01

A quality assurance (QA) program is described in which frontline pharmacists were asked test drug information questions via anonymous telephone calls. The program was instituted at a university hospital that began providing decentralized pharmaceutical services in 1985. Questions were developed on the basis of a pilot study conducted to determine the types and complexity of drug information questions received by frontline pharmacists at the hospital. Data on departmental clinical productivity were used to determine the number of questions that would be posed during each shift in the various service areas. The questions were posed during a 10-day period; the pharmacists were aware of the program, but the callers did not identify their affiliation with it. In response to 105 questions asked, 86 were judged to have been answered correctly, 13 answers were deemed incomplete, and 6 were judged incorrect. Pharmacists were more likely to respond incorrectly to complex questions and questions posed during the night shift. As a result of the audit, staff members with advanced clinical knowledge were asked to help less experienced pharmacists, the position of assistant director for drug information and staff development was created, and educational programs were instituted. The QA audit has been repeated twice. Posing test drug information questions via anonymous telephone calls is effective in assessing the quality of drug information provided by pharmacists in patient-care areas.

Artificial intelligence methodologies applied to quality control of the positioning services offered by the Red Andaluza de Posicionamiento (RAP network

Directory of Open Access Journals (Sweden)

Antonio José Gil

2012-12-01

Full Text Available On April 26, 2012, Elena Giménez de Ory defend-ed her Ph.D. thesis at University of Jaén, entitled: “Robust methodologies applied to quality control of the positioning services offered by the Red Andaluza de Posicionamiento (RAP network”. Elena Giménez de Ory defended her dissertation in a publicly open presentation held in the Higher Polytechnic School at the University of Jaén, and was able to comment on every question raised by her thesis committee and the audience. The thesis was supervised by her advisor, Prof. Antonio J. Gil Cruz, and the rest of his thesis committee, Prof. Manuel Sánchez de la Orden, Dr. Antonio Miguel Ruiz Armenteros and Dr. Gracia Rodríguez Caderot. The thesis has been read and approved by his thesis committee, receiving the highest rating. All of them were present at the presentation.

Membrane tension controls adhesion positioning at the leading edge of cells.

Science.gov (United States)

Pontes, Bruno; Monzo, Pascale; Gole, Laurent; Le Roux, Anabel-Lise; Kosmalska, Anita Joanna; Tam, Zhi Yang; Luo, Weiwei; Kan, Sophie; Viasnoff, Virgile; Roca-Cusachs, Pere; Tucker-Kellogg, Lisa; Gauthier, Nils C

2017-09-04

Cell migration is dependent on adhesion dynamics and actin cytoskeleton remodeling at the leading edge. These events may be physically constrained by the plasma membrane. Here, we show that the mechanical signal produced by an increase in plasma membrane tension triggers the positioning of new rows of adhesions at the leading edge. During protrusion, as membrane tension increases, velocity slows, and the lamellipodium buckles upward in a myosin II-independent manner. The buckling occurs between the front of the lamellipodium, where nascent adhesions are positioned in rows, and the base of the lamellipodium, where a vinculin-dependent clutch couples actin to previously positioned adhesions. As membrane tension decreases, protrusion resumes and buckling disappears, until the next cycle. We propose that the mechanical signal of membrane tension exerts upstream control in mechanotransduction by periodically compressing and relaxing the lamellipodium, leading to the positioning of adhesions at the leading edge of cells. © 2017 Pontes et al.

Robust Hinfinity position control synthesis of an electro-hydraulic servo system.

Science.gov (United States)

Milić, Vladimir; Situm, Zeljko; Essert, Mario

2010-10-01

This paper focuses on the use of the techniques based on linear matrix inequalities for robust H(infinity) position control synthesis of an electro-hydraulic servo system. A nonlinear dynamic model of the hydraulic cylindrical actuator with a proportional valve has been developed. For the purpose of the feedback control an uncertain linearized mathematical model of the system has been derived. The structured (parametric) perturbations in the electro-hydraulic coefficients are taken into account. H(infinity) controller extended with an integral action is proposed. To estimate internal states of the electro-hydraulic servo system an observer is designed. Developed control algorithms have been tested experimentally in the laboratory model of an electro-hydraulic servo system. Copyright © 2010 ISA. Published by Elsevier Ltd. All rights reserved.

tDCS over the left prefrontal cortex enhances cognitive control for positive affective stimuli.

Directory of Open Access Journals (Sweden)

Marie-Anne Vanderhasselt

Full Text Available Transcranial Direct Current Stimulation (tDCS is a neuromodulation technique with promising results for enhancing cognitive information processes. So far, however, research has mainly focused on the effects of tDCS on cognitive control operations for non-emotional material. Therefore, our aim was to investigate the effects on cognitive control considering negative versus positive material. For this sham-controlled, within-subjects study, we selected a homogeneous sample of twenty-five healthy participants. By using behavioral measures and event related potentials (ERP as indexes, we aimed to investigate whether a single session of anodal tDCS of the left dorsolateral prefrontal cortex (DLPFC would have specific effects in enhancing cognitive control for positive and negative valenced stimuli. After tDCS over the left DLPFC (and not sham control stimulation, we observed more negative N450 amplitudes along with faster reaction times when inhibiting a habitual response to happy compared to sad facial expressions. Gender did not influence the effects of tDCS on cognitive control for emotional information. In line with the Valence Theory of side-lateralized activity, this stimulation protocol might have led to a left dominant (relative to right prefrontal cortical activity, resulting in augmented cognitive control specifically for positive relative to negative stimuli. To verify that tDCS induces effects that are in line with all aspects of the well known Valence Theory, future research should investigate the effects of tDCS over the left vs. right DLPFC on cognitive control for emotional information.

Beginning EFL Teachers' Beliefs about Quality Questions and Their Questioning Practices

Science.gov (United States)

Pham, Ly Ngoc Khanh; Hamid, M. Obaidul

2013-01-01

Motivated by the scarcity of research that examines the impact of teacher beliefs on their actual practices in Vietnam, this study investigated the relationship between teachers' beliefs about quality questions and their questioning behaviours in terms of questioning purposes, content focus, students' cognitive level, wording and syntax. Thirteen…

Comparison between Long-Menu and Open-Ended Questions in computerized medical assessments. A randomized controlled trial

Directory of Open Access Journals (Sweden)

Fischer Martin R

2006-10-01

Full Text Available Abstract Background Long-menu questions (LMQs are viewed as an alternative method for answering open-ended questions (OEQs in computerized assessment. So far this question type and its influence on examination scores have not been studied sufficiently. However, the increasing use of computerized assessments will also lead to an increasing use of this question type. Using a summative online key feature (KF examination we evaluated whether LMQs can be compared with OEQs in regard to the level of difficulty, performance and response times. We also evaluated the content for its suitability for LMQs. Methods We randomized 146 fourth year medical students into two groups. For the purpose of this study we created 7 peer-reviewed KF-cases with a total of 25 questions. All questions had the same content in both groups, but nine questions had a different answer type. Group A answered 9 questions with an LM type, group B with an OE type. In addition to the LM answer, group A could give an OE answer if the appropriate answer was not included in the list. Results The average number of correct answers for LMQs and OEQs showed no significant difference (p = 0.93. Among all 630 LM answers only one correct term (0.32% was not included in the list of answers. The response time for LMQs did not significantly differ from that of OEQs (p = 0.65. Conclusion LMQs and OEQs do not differ significantly. Compared to standard multiple-choice questions (MCQs, the response time for LMQs and OEQs is longer. This is probably due to the fact that they require active problem solving skills and more practice. LMQs correspond more suitable to Short answer questions (SAQ then to OEQ and should only be used when the answers can be clearly phrased, using only a few, precise synonyms. LMQs can decrease cueing effects and significantly simplify the scoring in computerized assessment.

Robust balancing and position control of a single spherical wheeled mobile platform

OpenAIRE

Yavuz, Fırat; Yavuz, Firat; Ünel, Mustafa; Unel, Mustafa

2016-01-01

Self-balancing mobile platforms with single spherical wheel, generally called ballbots, are suitable example of underactuated systems. Balancing control of a ballbot platform, which aims to maintain the upright orientation by rejecting external disturbances, is important during station keeping or trajectory tracking. In this paper, acceleration based balancing and position control of a single spherical wheeled mobile platform that has three single-row omniwheel drive m...

A Novel Multiple Choice Question Generation Strategy: Alternative Uses for Controlled Vocabulary Thesauri in Biomedical-Sciences Education.

Science.gov (United States)

Lopetegui, Marcelo A; Lara, Barbara A; Yen, Po-Yin; Çatalyürek, Ümit V; Payne, Philip R O

2015-01-01

Multiple choice questions play an important role in training and evaluating biomedical science students. However, the resource intensive nature of question generation limits their open availability, reducing their contribution to evaluation purposes mainly. Although applied-knowledge questions require a complex formulation process, the creation of concrete-knowledge questions (i.e., definitions, associations) could be assisted by the use of informatics methods. We envisioned a novel and simple algorithm that exploits validated knowledge repositories and generates concrete-knowledge questions by leveraging concepts' relationships. In this manuscript we present the development and validation of a prototype which successfully produced meaningful concrete-knowledge questions, opening new applications for existing knowledge repositories, potentially benefiting students of all biomedical sciences disciplines.

Repetitive Questioning II

Directory of Open Access Journals (Sweden)

R. C. Hamdy MD

2018-02-01

Full Text Available Repetitive questioning is a major problem for caregivers, particularly taxing if they are unable to recognize and understand the reasons why their loved one keeps asking the same question over and over again. Caregivers may be tempted to believe that the patient does not even try to remember the answer given or is just getting obnoxious. This is incorrect. Repetitive questioning is due to the underlying disease: The patient’s short term memory is impaired and he is unable to register, encode, retain and retrieve the answer. If he is concerned about a particular topic, he will keep asking the same question over and over again. To the patient each time she asks the question, it is as if she asked it for the first time. Just answering repetitive questioning by providing repeatedly the same answer is not sufficient. Caregivers should try to identify the underlying cause for this repetitive questioning. In an earlier case study, the patient was concerned about her and her family’s safety and kept asking whether the doors are locked. In this present case study, the patient does not know how to handle the awkward situation he finds himself in. He just does not know what to do. He is not able to adjust to the new unexpected situation. So he repeatedly wants to reassure himself that he is not intruding by asking the same question over and over again. We discuss how the patient’s son-in-law could have avoided this situation and averted the catastrophic ending.

Bioengineering of Tobacco Mosaic Virus to Create a Non-Infectious Positive Control for Ebola Diagnostic Assays

Science.gov (United States)

Lam, Patricia; Gulati, Neetu M.; Stewart, Phoebe L.; Keri, Ruth A.; Steinmetz, Nicole F.

2016-03-01

The 2014 Ebola epidemic is the largest to date. There is no cure or treatment for this deadly disease; therefore there is an urgent need to develop new diagnostics to accurately detect Ebola. Current RT-PCR assays lack sensitive and reliable positive controls. To address this critical need, we devised a bio-inspired positive control for use in RT-PCR diagnostics: we encapsulated scrambled Ebola RNA sequences inside of tobacco mosaic virus to create a biomimicry that is non-infectious, but stable, and could therefore serve as a positive control in Ebola diagnostic assays. Here, we report the bioengineering and validation of this probe.

On Productive Knowledge and Levels of Questions.

Science.gov (United States)

Andre, Thomas

A model is proposed for memory that stresses a distinction between episodic memory for encoded personal experience and semantic memory for abstractors and generalizations. Basically, the model holds that questions influence the nature of memory representations formed during instruction, and that memory representation controls the way in which…

Detecting concealed information from groups using a dynamic questioning approach: simultaneous skin conductance measurement and immediate feedback

Directory of Open Access Journals (Sweden)

Ewout H Meijer

2013-02-01

Full Text Available Lie detection procedures typically aim at determining the guilt or innocence of a single suspect. The Concealed Information Test (CIT, for example, has been shown to be highly successful in detecting the presence or absence of crime-related information in a suspect’s memory. Many of today’s security threats, however, do not come from individuals, but from organized groups such as criminal organizations or terrorist networks. In this study, we tested whether a plan of an upcoming mock terrorist attack could be extracted from a group of suspects using a dynamic questioning approach. One-hundred participants were tested in 20 groups of 5. Each group was asked to plan a mock terrorist attack based on a list of potential countries, cities and streets. Next, three questions referring to the country, city, and street were presented, each with 5 options. Skin conductance in all 5 members of the group was measured simultaneously during this presentation. The dynamic questioning approach entailed direct analysis of the data, and if the average skin conductance of the group to a certain option exceeded a threshold, this option was followed up. E.g., if the reaction to the option ‘Italy’ exceeded the threshold, this was followed up by presenting 5 cities in Italy. Results showed that in 19 of the 20 groups the country was correctly detected using this procedure. In 13 of these remaining 19 groups the city was correctly detected. In 7 of these 13, the street was also correctly detected. The question about the country resulted in no false positives (out of 20, the question about the city resulted in 2 false positives (out of 19, while the question about the streets resulted in 2 false positives (out of 13. Furthermore, the 2 false positives at the city level also yielded a false positive at the street level. Taken together these results indicate our dynamic questioning approach can help to unveil plans about a mock terrorist attack.

Implementation of CTRLPOS, a VENTURE module for control rod position criticality searches, control rod worth curve calculations, and general criticality searches

Energy Technology Data Exchange (ETDEWEB)

Smith, L.A.; Renier, J.P.

1994-06-01

A module in the VENTURE reactor analysis code system, CTRLPOS, is developed to position control rods and perform control rod position criticality searches. The module is variably dimensioned so that calculations can be performed with any number of control rod banks each having any number of control rods. CTRLPOS can also calculate control rod worth curves for a single control rod or a bank of control rods. Control rod depletion can be calculated to provide radiation source terms. These radiation source terms can be used to predict radiation doses to personnel and estimate the shielding and long-term storage requirements for spent control rods. All of these operations are completely automated. The numerous features of the module are discussed in detail. The necessary input data for the CTRLPOS module is explained. Several sample problems are presented to show the flexibility of the module. The results presented with the sample problems show that the CTRLPOS module is a powerful tool which allows a wide variety of calculations to be easily performed.

Position control of a single pneumatic artificial muscle with hysteresis compensation based on modified Prandtl-Ishlinskii model.

Science.gov (United States)

Zang, Xizhe; Liu, Yixiang; Heng, Shuai; Lin, Zhenkun; Zhao, Jie

2017-01-01

High-performance position control of pneumatic artificial muscles is limited by their inherent nonlinearity and hysteresis. This study aims to model the length/pressure hysteresis of a single pneumatic artificial muscle and to realize its accurate position tracking control with forward hysteresis compensation. The classical Prandtl-Ishlinskii model is widely used in hysteresis modelling and compensation. But it is only effective for symmetric hysteresis. Therefore, a modified Prandtl-Ishlinskii model is built to characterize the asymmetric length/pressure hysteresis of a single pneumatic artificial muscle, by replacing the classical play operators with two more flexible elementary operators to independently describe the ascending branch and descending branch of hysteresis loops. On the basis, a position tracking controller, which is composed of cascade forward hysteresis compensation and simple proportional pressure controller, is designed for the pneumatic artificial muscle. Experiment results show that the MPI model can reproduce the length/pressure hysteresis of the pneumatic artificial muscle, and the proposed controller for the pneumatic artificial muscle can track the reference position signals with high accuracy. By modelling the length/pressure hysteresis with the modified Prandtl-Ishlinskii model and using its inversion for compensation, precise position control of a single pneumatic artificial muscle is achieved.

Quantum dots for future nanophotonic devices : lateral ordering, position, and number control

NARCIS (Netherlands)

Nötzel, R.; Sritirawisarn, N.; Selçuk, E.; Wang, H.; Yuan, J.

2009-01-01

We review our recent advances in the lateral ordering, position, and number control of self-organized epitaxial semiconductor quantum dots based on self-organized anisotropic strain engineering, growth on patterned substrates, and selective area growth.

Men ask more questions than women at a scientific conference.

Science.gov (United States)

Hinsley, Amy; Sutherland, William J; Johnston, Alison

2017-01-01

Gender inequity in science and academia, especially in senior positions, is a recognised problem. The reasons are poorly understood, but include the persistence of historical gender ratios, discrimination and other factors, including gender-based behavioural differences. We studied participation in a professional context by observing question-asking behaviour at a large international conference with a clear equality code of conduct that prohibited any form of discrimination. Accounting for audience gender ratio, male attendees asked 1.8 questions for each question asked by a female attendee. Amongst only younger researchers, male attendees also asked 1.8 questions per female question, suggesting the pattern cannot be attributed to the temporary problem of demographic inertia. We link our findings to the 'chilly' climate for women in STEM, including wider experiences of discrimination likely encountered by women throughout their education and careers. We call for a broader and coordinated approach to understanding and addressing the barriers to women and other under-represented groups. We encourage the scientific community to recognise the context in which these gender differences occur, and evaluate and develop methods to support full participation from all attendees.

Men ask more questions than women at a scientific conference.

Directory of Open Access Journals (Sweden)

Amy Hinsley

Full Text Available Gender inequity in science and academia, especially in senior positions, is a recognised problem. The reasons are poorly understood, but include the persistence of historical gender ratios, discrimination and other factors, including gender-based behavioural differences. We studied participation in a professional context by observing question-asking behaviour at a large international conference with a clear equality code of conduct that prohibited any form of discrimination. Accounting for audience gender ratio, male attendees asked 1.8 questions for each question asked by a female attendee. Amongst only younger researchers, male attendees also asked 1.8 questions per female question, suggesting the pattern cannot be attributed to the temporary problem of demographic inertia. We link our findings to the 'chilly' climate for women in STEM, including wider experiences of discrimination likely encountered by women throughout their education and careers. We call for a broader and coordinated approach to understanding and addressing the barriers to women and other under-represented groups. We encourage the scientific community to recognise the context in which these gender differences occur, and evaluate and develop methods to support full participation from all attendees.

Comparison between Two Assessment Methods; Modified Essay Questions and Multiple Choice Questions

Directory of Open Access Journals (Sweden)

Assadi S.N.* MD

2015-09-01

Full Text Available Aims Using the best assessment methods is an important factor in educational development of health students. Modified essay questions and multiple choice questions are two prevalent methods of assessing the students. The aim of this study was to compare two methods of modified essay questions and multiple choice questions in occupational health engineering and work laws courses. Materials & Methods This semi-experimental study was performed during 2013 to 2014 on occupational health students of Mashhad University of Medical Sciences. The class of occupational health and work laws course in 2013 was considered as group A and the class of 2014 as group B. Each group had 50 students.The group A students were assessed by modified essay questions method and the group B by multiple choice questions method.Data were analyzed in SPSS 16 software by paired T test and odd’s ratio. Findings The mean grade of occupational health and work laws course was 18.68±0.91 in group A (modified essay questions and was 18.78±0.86 in group B (multiple choice questions which was not significantly different (t=-0.41; p=0.684. The mean grade of chemical chapter (p<0.001 in occupational health engineering and harmful work law (p<0.001 and other (p=0.015 chapters in work laws were significantly different between two groups. Conclusion Modified essay questions and multiple choice questions methods have nearly the same student assessing value for the occupational health engineering and work laws course.

Formative student-authored question bank: perceptions, question quality and association with summative performance.

Science.gov (United States)

Walsh, Jason L; Harris, Benjamin H L; Denny, Paul; Smith, Phil

2018-02-01

There are few studies on the value of authoring questions as a study method, the quality of the questions produced by students and student perceptions of student-authored question banks. Here we evaluate PeerWise, a widely used and free online resource that allows students to author, answer and discuss multiple-choice questions. We introduced two undergraduate medical student cohorts to PeerWise (n=603). We looked at their patterns of PeerWise usage; identified associations between student engagement and summative exam performance; and used focus groups to assess student perceptions of the value of PeerWise for learning. We undertook item analysis to assess question difficulty and quality. Over two academic years, the two cohorts wrote 4671 questions, answered questions 606 658 times and posted 7735 comments. Question writing frequency correlated most strongly with summative performance (Spearman's rank: 0.24, p=<0.001). Student focus groups found that: (1) students valued curriculum specificity; and (2) students were concerned about student-authored question quality. Only two questions of the 300 'most-answered' questions analysed had an unacceptable discriminatory value (point-biserial correlation <0.2). Item analysis suggested acceptable question quality despite student concerns. Quantitative and qualitative methods indicated that PeerWise is a valuable study tool. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

CURBSIDE CONSULTATION IN KNEE ARTHROPLASTY: 49 CLINICAL QUESTIONS

Directory of Open Access Journals (Sweden)

Craig J. Della Vale

2008-12-01

chapter there are revision questions including painful total knee arthroplasty, periprosthetic infection, exposure in revision knee arthroplasty, surgical technique, using stem, offset stems, massive bone loss, retaining patellar component, severe patellar bone loss, assessing joint line position, inserts, chronic extensor mechanism deficiency, spacers, knee fusion, positive culture. AUDIENCE Mainly orthopedic surgeons and residents who are interested in knee arthroplasty have been targeted but the current information related to total knee replacement surgery will also be welcomed by experienced clinicians practicing in knee arthroplasty. Also non-physician personnel may benefit the brief knowledge. ASSESSMENT The brief answers including current concepts and opinions of expert arthroplasty surgeons to carefully chosen questions related to the problems faced in the daily practice of knee artroplasty forming the sections are making almost comprehensive source knowledge for total knee replacement surgery. This reference of complicated cases and controversies in knee arthroplasty by Craig J. Della Vale, MD.and his collaborators will be one of the most practical source of current solutions in the management of knee arthroplasty . Providing straightforward, brief and useful advices, in the form of pearls and pitfalls for frequently encountered problems in total knee replacement surgery makes the text a user friendly, essential reference. The casual style of articles resembling the advices in a dialog of colleagues on a curbside consult makes the text easier to read and understand. Various image and diagrams enhances the knowledge in the text

Nuclear questions

International Nuclear Information System (INIS)

Berg, Eugene

2012-01-01

Civilian and military nuclear questions fill a multitude of publications these days, especially after the Japanese tsunami and the Fukushima disaster. The author analyses some of them and highlights the links between civil and military nuclear industries, the realities of the nuclear cycle and related industrial questions before concluding on the controversial issue of weapons and their proliferation potential

Approaches to Exploring Category Information for Question Retrieval in Community Question-Answer Archives

DEFF Research Database (Denmark)

Cao, Xin; Cong, Gao; Cui, Bin

2012-01-01

, and it applies these approaches to existing question retrieval models, including a state-of-the-art question retrieval model. Experiments conducted on real CQA data demonstrate that the proposed techniques are effective and efficient and are capable of outperforming a variety of baseline methods significantly......Community Question Answering (CQA) is a popular type of service where users ask questions and where answers are obtained from other users or from historical question-answer pairs. CQA archives contain large volumes of questions organized into a hierarchy of categories. As an essential function...

Position display device

International Nuclear Information System (INIS)

Nishizawa, Yukio.

1974-01-01

Object: To provide a device capable of easily and quickly reading mutual mounting relations of control bodies such as control rods mounted on a nuclear reactor and positions to which the control bodies are driven. Structure: A scanning circuit is provided to scan positions of controllably mounted control bodies such as control rods. Values detected by scanning the positions are converted into character signals according to the values and converted into preranked color signals. The character signals and color signals are stored in a memory circuit by synchronous signals in synchronism with the scanning in the scanning circuit. Outputs of the memory circuit are displayed by a display unit such as a color Braun tube in accordance with the synchronous signals to provide color representations according to positions to which control bodies are driven in the same positional relation as the mounting of the control bodies. (Kamimura, M.)

Questioning ORACLE: An Assessment of ORACLE's Analysis of Teachers' Questions and [A Comment on "Questioning ORACLE"].

Science.gov (United States)

Scarth, John; And Others

1986-01-01

Analysis of teachers' questions, part of the ORACLE (Observation Research and Classroom Learning Evaluation) project research, is examined in detail. Scarth and Hammersley argue that the rules ORACLE uses for identifying different types of questions involve levels of ambiguity and inference that threaten reliability and validity of the study's…

Controlling resonance energy transfer in nanostructure emitters by positioning near a mirror

Science.gov (United States)

Weeraddana, Dilusha; Premaratne, Malin; Gunapala, Sarath D.; Andrews, David L.

2017-08-01

The ability to control light-matter interactions in quantum objects opens up many avenues for new applications. We look at this issue within a fully quantized framework using a fundamental theory to describe mirror-assisted resonance energy transfer (RET) in nanostructures. The process of RET communicates electronic excitation between suitably disposed donor and acceptor particles in close proximity, activated by the initial excitation of the donor. Here, we demonstrate that the energy transfer rate can be significantly controlled by careful positioning of the RET emitters near a mirror. The results deliver equations that elicit new insights into the associated modification of virtual photon behavior, based on the quantum nature of light. In particular, our results indicate that energy transfer efficiency in nanostructures can be explicitly expedited or suppressed by a suitably positioned neighboring mirror, depending on the relative spacing and the dimensionality of the nanostructure. Interestingly, the resonance energy transfer between emitters is observed to "switch off" abruptly under suitable conditions of the RET system. This allows one to quantitatively control RET systems in a new way.

Simultaneous positioning and orientation of a single nano-object by flow control: theory and simulations

International Nuclear Information System (INIS)

Mathai, Pramod P; Berglund, Andrew J; Alexander Liddle, J; Shapiro, Benjamin A

2011-01-01

In this paper, we theoretically describe a method to simultaneously control both the position and orientation of single nano-objects in fluids by precisely controlling the flow around them. We develop and simulate a control law that uses electro-osmotic flow (EOF) actuation to translate and rotate rigid nano-objects in two spatial dimensions. Using EOF to control nano-objects offers advantages as compared to other approaches: a wide class of objects can be manipulated (no magnetic or electric dipole moments are needed), the object can be controlled over a long range (>100 μm) with sub-micrometer accuracy, and control may be achieved with simple polydimethylsiloxane (PDMS) devices. We demonstrate the theory and numerical solutions that will enable deterministic control of the position and orientation of a nano-object in solution, which can be used, for example, to integrate nanostructures in circuits and orient sensors to probe living cells.

Imagined Positive Emotions and Inhibitory Control: The Differentiated Effect of Pride versus Happiness

Science.gov (United States)

Katzir, Maayan; Eyal, Tal; Meiran, Nachshon; Kessler, Yoav

2010-01-01

"Inhibitory control" is a cognitive mechanism that contributes to successful self-control (i.e., adherence to a long-term goal in the face of an interfering short-term goal). This research explored the effect of imagined positive emotional events on inhibition. The authors proposed that the influence of imagined emotions on inhibition…

Optimal Control Method of Robot End Position and Orientation Based on Dynamic Tracking Measurement

Science.gov (United States)

Liu, Dalong; Xu, Lijuan

2018-01-01

In order to improve the accuracy of robot pose positioning and control, this paper proposed a dynamic tracking measurement robot pose optimization control method based on the actual measurement of D-H parameters of the robot, the parameters is taken with feedback compensation of the robot, according to the geometrical parameters obtained by robot pose tracking measurement, improved multi sensor information fusion the extended Kalan filter method, with continuous self-optimal regression, using the geometric relationship between joint axes for kinematic parameters in the model, link model parameters obtained can timely feedback to the robot, the implementation of parameter correction and compensation, finally we can get the optimal attitude angle, realize the robot pose optimization control experiments were performed. 6R dynamic tracking control of robot joint robot with independent research and development is taken as experimental subject, the simulation results show that the control method improves robot positioning accuracy, and it has the advantages of versatility, simplicity, ease of operation and so on.

Automatic and controlled attentional orienting in the elderly: A dual-process view of the positivity effect.

Science.gov (United States)

Gronchi, G; Righi, S; Pierguidi, L; Giovannelli, F; Murasecco, I; Viggiano, M P

2018-04-01

The positivity effect in the elderly consists of an attentional preference for positive information as well as avoidance of negative information. Extant theories predict either that the positivity effect depends on controlled attentional processes (socio-emotional selectivity theory), or on an automatic gating selection mechanism (dynamic integration theory). This study examined the role of automatic and controlled attention in the positivity effect. Two dot-probe tasks (with the duration of the stimuli lasting 100 ms and 500 ms, respectively) were employed to compare the attentional bias of 35 elderly people to that of 35 young adults. The stimuli used were expressive faces displaying neutral, disgusted, fearful, and happy expressions. In comparison to young people, the elderly allocated more attention to happy faces at 100 ms and they tended to avoid fearful faces at 500 ms. The findings are not predicted by either theory taken alone, but support the hypothesis that the positivity effect in the elderly is driven by two different processes: an automatic attention bias toward positive stimuli, and a controlled mechanism that diverts attention away from negative stimuli. Copyright © 2018 Elsevier B.V. All rights reserved.

Automated positioning dual-axis solar tracking system with precision elevation and azimuth angle control

International Nuclear Information System (INIS)

Sidek, M.H.M.; Azis, N.; Hasan, W.Z.W.; Ab Kadir, M.Z.A.; Shafie, S.; Radzi, M.A.M.

2017-01-01

This paper presents a study on an automated positioning open-loop dual-axis solar tracking system. The solar tracker was designed and fabricated using standard cylindrical aluminium hollow and Polyuthrene (PE). The control system of the solar tracker was governed by Micro Controller Unit (MCU) with auxiliary devices which includes encoder and Global Positioning System (GPS). The sun path trajectory algorithm utilizing the astronomical equation and GPS information was also embedded in the system. The power generation performance of the dual-axis solar tracking system was compared with the fixed-tilted Photovoltaic (PV) system. It is found that the solar tracker is able to position itself automatically based on sun path trajectory algorithm with an accuracy of ±0.5°. The embedded Proportional Integral Derivative (PID) positioning system improves the tracking of elevation and azimuth angles with minimum energy consumption. It is reveals that the proposed solar tracker is able generate 26.9% and 12.8% higher power than fixed-tilted PV system on a clear and heavy overcast conditions respectively. Overall, the open-loop dual-axis solar tracker can be deployed automatically at any location on the earth with minimal configurations and is suitable for mobile solar tracking system. - Highlights: • Self-positioning dual-axis solar tracking system. • Precise control of elevation and azimuth angle. • Sun path trajectory based on astronomical equation and GPS. • Can achieve up to 26.9% higher power than fixed-tilted PV system under clear weather condition.

Pathways to Adolescents' Flourishing: Linking Self-Control Skills and Positivity Ratio through Social Support

Science.gov (United States)

Orkibi, Hod; Hamama, Liat; Gavriel-Fried, Belle; Ronen, Tammie

2018-01-01

This study focused on the ability to experience a high ratio of positive to negative emotions in 807 Israeli adolescents aged 12 to 15 years (50% girls). While considering possible gender differences, we tested a model positing that adolescents' self-control skills would link to their positivity ratio and indirectly through perceived social…

Curiosity Questions

Science.gov (United States)

Nelsen, Jane; DeLorenzo, Chip

2010-01-01

Have you ever found yourself lecturing a child, with the best of intentions, in an attempt to help him or her learn a lesson or process a situation in a manner that you feel will be productive? Curiosity questions, which the authors also call What and How questions, help children process an experience, event, or natural consequence so that they…

Open-loop position tracking control of a piezoceramic flexible beam using a dynamic hysteresis compensator

International Nuclear Information System (INIS)

Nguyen, Phuong-Bac; Choi, Seung-Bok

2010-01-01

This paper proposes a novel hysteresis compensator to enhance control accuracy in open-loop position tracking control of a piezoceramic flexible beam. The proposed hysteresis compensator consists of two components: a rate-independent hysteresis compensator and a nonlinear filter. The compensator is formulated based on the inverse Preisach model, while the weight coefficients of the filter are identified adaptively using a recursive least square (RLS) algorithm. In this work, two dynamic hysteresis compensators (or rate-independent hysteresis compensators) are developed by adopting two different nonlinear filters: Volterra and bilinear filters. In order to demonstrate the improved control accuracy of the proposed dynamic compensators, a flexible beam associated with the piezoceramic actuator is modeled using the finite element method (FEM) and Euler–Bernoulli beam theory. The beam model is then integrated with the proposed hysteresis model to achieve accurate position tracking control at the tip of the beam. An experimental investigation on the tip position tracking control is undertaken by realizing three different hysteresis compensators: a rate-independent hysteresis compensator, a rate-dependent hysteresis compensator with a Volterra nonlinear filter and a rate-independent hysteresis compensator with a bilinear nonlinear filter. It is shown that the proposed dynamic hysteresis compensators can provide much better tracking control accuracy than conventional rate-independent hysteresis compensators

The use of questions as problem-solving strategies during early childhood.

Science.gov (United States)

Legare, Cristine H; Mills, Candice M; Souza, André L; Plummer, Leigh E; Yasskin, Rebecca

2013-01-01

This study examined the strategic use of questions to solve problems across early childhood. Participants (N=54, 4-, 5-, and 6-year-olds) engaged in two tasks: a novel problem-solving question task that required asking questions to an informant to determine which card in an array was located in a box and a cognitive flexibility task that required classifying stimuli by multiple dimensions. The results from the question task indicated that there were age differences in the types of questions asked, with 6-year-olds asking more constraint-seeking questions than 4- and 5-year-olds. The number of constraint-seeking questions asked was the only significant predictor of accuracy. Performance on the cognitive flexibility task correlated with both constraint-seeking strategy use and accuracy in the question task. In sum, our results provide evidence that the capacity to use questions to generate relevant information develops before the capacity to apply this information successfully and consistently to solve complex problems. We propose that the process of using questions as strategic tools is an ideal context for examining how children come to gain active and intentional control over problem solving. Copyright © 2012 Elsevier Inc. All rights reserved.

MDEP Common Position No EPR-01 - Common positions on the EPR instrumentation and controls design

International Nuclear Information System (INIS)

2010-01-01

The purpose of the EPR Working Group (EPRWG) of the Multinational Design Evaluation Program (MDEP) is to identify common positions among the regulators reviewing the EPR Instrumentation and Controls (I and C) Systems in order to: 1. Promote understanding of each country 's regulatory decisions and basis for the decisions, 2. Enhance communication among the members and with external stakeholders, 3. Identify areas where harmonization and convergence of regulations, standards, and guidance can be achieved or improved, and 4. Supports standardization of new reactor designs. Since January 2008, the EPR I and C Technical Expert Subgroup (TESG) members met five times to exchange information regarding their country 's review of the EPR I and C design. The EPR I and C TESG consists of regulators from China, Canada, Finland, France, the United Kingdom, and the United States. The information exchange includes presentation of each country 's review status and technical issues, sharing of guidance documents, and sharing of regulatory decision documents. The TESG focused on the following four core areas of the EPR I and C design: 1. I and C System Independence (particularly for data communications), 2. Level of Defense and Diversity (back-up systems), 3. Qualification/quality of digital platforms, 4. Categorization/classification of systems and functions. As meetings were conducted, some areas were emphasized more depending on the significance of the issues for each country. During the TESG interactions, it became apparent that there were aspects of the EPR design where the countries had common agreement. On November 2, 2009, three of the subgroup countries, France, Finland and the United Kingdom, issued a joint regulatory position on the EPR I and C design as result of the 'Groupe Permanent' meeting in France. This statement of common positions expands upon that joint regulatory position

A Sleep Position Trainer for positional sleep apnea

DEFF Research Database (Denmark)

Laub, Rasmus R; Tønnesen, Philip; Jennum, Poul J

2017-01-01

We tested the effect of the Sleep Position Trainer, a vibrational device, for positional sleep apnea in an open, randomized controlled trial with 101 patients, where 52 patients were allocated to Sleep Position Trainer and 49 patients to a non-treatment control group for 2 months (Part 1). All...... patients were then followed as a cohort for a period of 6 months with use of the Sleep Position Trainer (Part 2). The participants were assessed with polygraphy at entry, and after 2 and 6 months. The mean apnea-hypopnea index supine was 35 per h (SD, 18) in the Sleep Position Trainer group and 38 per h...... (SD, 15) in the control group at entry. In a per protocol analysis, the mean total apnea-hypopnea index at entry and after 2 months in the Sleep Position Trainer group was 18 per h (SD, 10) and 10 per h (SD, 9; P

Intention-to-treat. What is the question?

Directory of Open Access Journals (Sweden)

Feinman Richard D

2009-01-01

Full Text Available Abstract It has become commonplace for Randomized Controlled Trials (RCTs to be analyzed according to Intention-to-Treat (ITT principles in which data from all subjects are used regardless of the subjects' adherence to protocol. While ITT analyses can provide useful information in some cases, they do not answer the question that motivates many RCTs, namely, whether the treatments differ in efficacy. ITT tends to reduce information by combining two questions, whether the intervention is effective and whether, as implemented, it has good compliance. Because these questions may be separate there is a risk of misuse. Two examples are presented that demonstrate this potential for abuse: a study on the effectiveness of vitamin E in reducing cardiovascular risk and comparisons of low fat and low carbohydrate diets. In the first case, a treatment that is demonstrably effective is described as without merit. In the second, ITT describes as the same, two diets that actually have different outcomes. These misuses of ITT are not atypical and are not technical problems in statistics but have real consequences for scientific principles and health recommendations. ITT analyses may answer the question of what happens when treatments are recommended but are inappropriate where separate information on adherence and performance is available. It is proposed that results of RCTs, or any experimental study, be reported, not in terms of the analyses that were performed, but rather in terms of the questions that the analyses can answer properly.

THE EXPLICIT COMPREHENSION-STRATEGY INSTRUCTION: QUESTION-ANSWER RELATIONSHIP VS SELF-QUESTIONING

Directory of Open Access Journals (Sweden)

Lalu Thohir

2017-12-01

Full Text Available This study was aimed at examining and comparing the effectiveness of the Question-Answer Relationship (QAR and Self-Questioning (SQ strategies in improving the reading ability of the undergraduate students. This study was a quasi-experimental study in which two out of three classes of the third semester students at English department of Mataram University were selected randomly to receive either QAR strategy or SQ strategy instructions for ten weekly meetings. The findings of pre- and posttest with multiple-choice questions revealed that both comprehension strategies were effective in improving the undergraduate students‘ reading ability. The findings from the posttest with multiple-choice questions indicated the students who received SQ strategy instruction scored significantly higher than those students who received QAR strategy instruction. On the other hand, the students who received QAR strategy instruction scored slightly higher than those students who received SQ strategy instruction in the posttest with open-ended questions.

The use of impression management tactics in structured interviews: a function of question type?

Science.gov (United States)

Ellis, Aleksander P J; West, Bradley J; Ryan, Ann Marie; DeShon, Richard P

2002-12-01

This study investigated impression management tactic use during structured interviews containing both experience-based and situational questions. Specifically, the authors examined whether applicants' use of impression management tactics depended on question type. Results from 119 structured interviews indicated that almost all of the applicants used some form of impression management. Significantly more assertive than defensive impression management tactics were used, and among assertive tactics, applicants tended to use self-promotion rather than ingratiation. However, different question types prompted the use of different impression management tactics. Ingratiation tactics were used significantly more when applicants answered situational questions, whereas self-promotion tactics were used significantly more when applicants answered experience-based questions. Furthermore, the use of self-promotion and ingratiation tactics was positively related to interviewer evaluations.

Trouble in the second year: three questions about family interaction.

Science.gov (United States)

Belsky, J; Woodworth, S; Crnic, K

1996-04-01

3 questions regarding family interaction in the second year of life are addressed in this report on 69 families rearing firstborn sons. Question 1 concerns the identification, via cluster analysis, of families having difficulty managing their child, using codings of narrative records of family interaction when children were 15 and 21 months of age. Parents in families identified as "troubled" at each age tried to control their toddlers most often, were least likely to rely upon control-plus-guidance management strategies, had children who defied them most frequently, and experienced the greatest escalation of negative affect in these control encounters. Families identified as "troubled" at both 15 and 21 months had children who received the highest "externalizing" problem scores at 18 months and mothers who experienced the most daily hassles during the second year. Question 2 concerns the antecedents of "trouble in the second year." Discriminant function analyses indicated that membership in the groups of families that appeared troubled at both ages of measurement (n = 15), at only one age (n = 28), or never (n = 26) could be reliably predicted (hit rate = 71%) using a set of 9 measurements of parent personality, child emotionality/temperament, marital quality, work-family relations, and social support, suggested by Belsky's model of the determinants of parenting, and social class. Question 3 concerns the proposition that extensive nonmaternal care in the first year is a risk factor for troubled family functioning in the second year. As hypothesized, prediction analysis showed that families at moderate and high contextual risk (based on 10 antecedent variables pertaining to Question 2), were significantly more likely to experience trouble in the second year when children experienced 20 or more hours per week of nonmaternal care in their first year, and these results could not be attributed to "selection effects."

Vertical position control of the elongated INTOR plasma

International Nuclear Information System (INIS)

Ueda, Kojyu; Nishio, Satoshi; Fujisawa, Noboru; Sugihara, Masayoshi; Saito, Seiji; Miyamoto, Kenro.

1983-01-01

A newly devised rectangular shell, which has the sufficient shell effect for the stabilization of the fast mode, is presented, along with the studies of various kinds of shell-structures described on this paper. It can be expected that the rectangular shells have negligibly small effect on the breeding ratio by locating them separately on both of the front and rear surfaces of blanket. Some properties with the modelled feedback control system are elucidated under a disturbance field, B sub(d) = B sub(infinity).[1-exp(-t/tau sub(d))] (B sub(infinity): field strength at t = infinity, tau sub(d): time constant). They are studied for two kinds of decay indices, that is, -1.0 for the pump limiter and -1.3 for the divertor. Conclusively, the control system is found to have good characteristics. The PID controller seems to provide the stable control of vertical position better than the PI controller. The maximum of vertical displacement, Z sub(p)sup(max) under the disturbance field, B sub(d), are in proportion to B sub(infinity). The power required for its stabilization, P, are also in proportion to B sub(infinity)sup(2), and then to (Z sub(P)sup(MAX))sup(2), too. Therefore, some common basis for B sub(infinity) or Z sub(P)sup(MAX) is required for its estimation. Moreover, the power is found to be independent of selection of the PI or PID controller, and to have approximately the same relation with Z sub(P)sup(MAX). The difference of P between -1.0 and -1.3 in the decay index is very large when Z sub(P)sup(MAX) is more than -1.0 cm. For example, in the vicinity of Z sub(P)sup(MAX) = 1.0 cm, the power in the case of n = -1.0 is about one half of that in the case of n = -1.3. But it decreases abruptly when Z sub(P)sup(MAX) is less than 0.5 cm. (J.P.N.)

Positive affect and cognitive control: approach-motivation intensity influences the balance between cognitive flexibility and stability.

Science.gov (United States)

Liu, Ya; Wang, Zhenhong

2014-05-01

In most prior research, positive affect has been consistently found to promote cognitive flexibility. However, the motivational dimensional model of affect assumes that the influence of positive affect on cognitive processes is modulated by approach-motivation intensity. In the present study, we extended the motivational dimensional model to the domain of cognitive control by examining the effect of low- versus high-approach-motivated positive affect on the balance between cognitive flexibility and stability in an attentional-set-shifting paradigm. Results showed that low-approach-motivated positive affect promoted cognitive flexibility but also caused higher distractibility, whereas high-approach-motivated positive affect enhanced perseverance but simultaneously reduced distractibility. These results suggest that the balance between cognitive flexibility and stability is modulated by the approach-motivation intensity of positive affective states. Therefore, it is essential to incorporate motivational intensity into studies on the influence of affect on cognitive control.

The six most essential questions in psychiatric diagnosis: a pluralogue. Part 4: general conclusion

Directory of Open Access Journals (Sweden)

Phillips James

2012-12-01

Full Text Available Abstract In the conclusion to this multi-part article I first review the discussions carried out around the six essential questions in psychiatric diagnosis – the position taken by Allen Frances on each question, the commentaries on the respective question along with Frances’ responses to the commentaries, and my own view of the multiple discussions. In this review I emphasize that the core question is the first – what is the nature of psychiatric illness – and that in some manner all further questions follow from the first. Following this review I attempt to move the discussion forward, addressing the first question from the perspectives of natural kind analysis and complexity analysis. This reflection leads toward a view of psychiatric disorders – and future nosologies – as far more complex and uncertain than we have imagined.

On Position Sensorless Control for Permanent Magnet Synchronous Motor Based on a New Sliding Mode Observer

Directory of Open Access Journals (Sweden)

Qixin Zhu

2014-10-01

Full Text Available For the problems of buffeting and phase delay in traditional rotor detection in sensorless vector control of permanent magnet synchronous motor (PMSM, the Sigmoid function is proposed to replace sign function and the approach of piecewise linearization is proposed to compensate phase delay. To the problem that the output of traditional low pass filter contains high- order harmonic, two-stage filter including traditional low-pass filter and Kalman filter is proposed in this paper. Based on the output of traditional first-order low-pass filter, the Kalman filter is used to get modified back-EMF. The phase-locked loop control of rotor position is adopted to estimate motor position and speed. A Matlab/Simulink simulation model of PMSM position servo control system is established. The simulation analysis of the new sliding mode observer’s back-EMF detection, position and speed estimation, load disturbance and dynamic process are carried out respectively. Simulation results verify feasibility of the new sliding mode observer algorithm.

Library and Informatics Training May Improve Question Formulation among Public Health Practitioners, A Review of: Eldredge, Jonathan D., Richard Carr, David Broudy, and Ronald E. Voorhees. “The Effect of Training on Question Formulation among Public Health Practitioners: Results from a Randomized Controlled Trial.” Journal of the Medical Library Association 96.4 (2008: 299‐309.

Directory of Open Access Journals (Sweden)

Heather Ganshorn

2009-12-01

Full Text Available Objective – To determine whether providing library and informatics training to public health professionals would increase the number and sophistication of work‐related questions asked by these workers.Design – Randomized controlled trial.Setting – New Mexico Department of Health.Subjects – Public health professionals from a variety of professions, including “administrators, disease prevention specialists, epidemiologists, health educators, nurses, nutritionists, physicians, program directors, and social workers” (301. Only staff from the New Mexico Department of Health were eligible to participate.Methods – All subjects received a three‐hour training session on finding evidence based public health information, with a focus on using PubMed. Two sessions were offered, two weeks apart. Participants were randomized to either an intervention group, which received instruction on the first date, or a control group, which received instruction on the second date. The intervening two weeks constitute the study period, in which both groups were surveyed by e‐mail about their work‐related question generation. Three times per week, subjects received e‐mail reminders asking them to submit survey responses regarding all questions that had arisen in their practice, along with information about their attempts to answer them. Questions were tallied, and totals were compared between the two groups. Questions were also analysed for level of sophistication, and classified by the investigators as either “background” questions, which are asked when one has little knowledge of the field, and can usually be answered using textbooks or other reference sources, or “foreground” questions, which are often asked when an individual is familiar with the subject, and looking for more sophisticated information that is usually found in journals and similar sources. This scheme for classifying questions was developed by Richardson and Mulrow

Predictors for benign paroxysmal positional vertigo with positive Dix–Hallpike test

Directory of Open Access Journals (Sweden)

Noda K

2011-12-01

Full Text Available Kazutaka Noda, Masatomi Ikusaka, Yoshiyuki Ohira, Toshihiko Takada, Tomoko TsukamotoDepartment of General Medicine, Chiba University Hospital, Chiba, JapanObjective: Patient medical history is important for making a diagnosis of causes of dizziness, but there have been no studies on the diagnostic value of individual items in the history. This study was performed to identify and validate useful questions for suspecting a diagnosis of benign paroxysmal positional vertigo (BPPV.Methods: Construction and validation of a disease prediction model was performed at the outpatient clinic in the Department of General Medicine of Chiba University Hospital. Patients with dizziness were enrolled (145 patients for construction of the disease prediction model and 61 patients for its validation. This study targeted BPPV of the posterior semicircular canals only with a positive Dix–Hallpike test (DHT + BPPV to avoid diagnostic ambiguity. Binomial logistic regression analysis was performed to identify the items that were useful for diagnosis or exclusion of DHT + BPPV.Results: Twelve patients from the derivation set and six patients from the validation set had DHT + BPPV. Binomial logistic regression analysis selected a "duration of dizziness ≤15 seconds" and "onset when turning over in bed" as independent predictors of DHT + BPPV with an odds ratio (95% confidence interval of 4.36 (1.18–16.19 and 10.17 (2.49–41.63, respectively. Affirmative answers to both questions yielded a likelihood ratio of 6.81 (5.11–9.10 for diagnosis of DHT + BPPV, while negative answers to both had a likelihood ratio of 0.19 (0.08–0.47.Conclusion: A "duration of dizziness ≤15 seconds" and "onset when turning over in bed" were the two most important questions among various historical features of BPPV.Keywords: benign paroxysmal positional vertigo, likelihood ratio, diagnosis, screening, prediction rules

CURBSIDE CONSULTATION OF THE ACL: 49 CLINICAL QUESTIONS

Directory of Open Access Journals (Sweden)

Bernard R. Bach

2008-09-01

Full Text Available DESCRIPTION A unique reference that offers opinions, preferences and expert advice associated with management of ACL injuries in the questions and answers format which enhanced by images, diagrams and references. PURPOSE "Curbside Consultation of the ACL" aims to provide some knowledge more than the basic information in the evaluation and the management of ACL injuries. This information is based on the opinion or the advice of an expert. Quick access of audience to these pearl and pit-falls and evidence-based expert advice for complicated cases in ACL reconstruction in the form of brief answers including current concepts is targeted by the authors. FEATURES 49 Clinical questions are outlined in 5 sections. In the first section is about preoperative questions including indications, diagnostic measures, combined ligament injuries, graft choice, preparation before surgery, avulsion of the eminence, examination in posterolateral corner injury. In the second section is preoperative questions are subjected including dropping the graft to the floor, posterior wall blowout, knees without hamstring tendon, graft amputation by interference screw, to avoid vertical tunnel in tibia, fixation methods of graft, femoral and tibial tunnel positioning. Third section is about postoperative questions including postoperative management, differences in postoperative rehabilitation protocols in different type of grafts, postoperative man-agement of meniscal repair, management in difficulties in gaining extension, infection, patellar pain, timing of reop-eration in motion problems, criteria returning to sports, outcome measures, outcome in using different grafts, role of bracing. The fourth section is about failed ACL recon-struction including causes, indications for revision, ex-panded tunnels, graft choice in revision surgery, contro-lateral patellar tendon graft for revision, rehab protocol after revision surgery, hardware removal, early degenera-tive joint disease

Assessment of Motor Control during Three-Dimensional Movements Tracking with Position-Varying Gravity Compensation

Directory of Open Access Journals (Sweden)

Yao Huang

2017-05-01

Full Text Available Active movements are important in the rehabilitation training for patients with neurological motor disorders, while weight of upper limb impedes movements due to muscles weakness. The objective of this study is to develop a position-varying gravity compensation strategy for a cable-based rehabilitation robot. The control strategy can estimate real-time gravity torque according to position feedback. Then, the performance of this control strategy was compared with the other two kinds of gravity compensation strategies (i.e., without compensation and with fixed compensation during movements tracking. Seven healthy subjects were invited to conduct tracking tasks along four different directions (i.e., upward, forward, leftward, and rightward. The performance of movements with different compensation strategies was compared in terms of root mean square error (RMSE between target and actual moving trajectories, normalized jerk score (NJS, mean velocity ratio (MVR of main motion direction, and the activation of six muscles. The results showed that there were significant effects in control strategies in all four directions with the RMSE and NJS values in the following order: without compensation > fixed compensation > position-varying compensation and MVR values in the following order: without compensation < fixed compensation < position-varying compensation (p < 0.05. Comparing with movements without compensation in all four directions, the activation of muscles during movements with position-varying compensation showed significant reductions, except the activations of triceps and in forward and leftward movements, the activations of upper trapezius and middle parts of deltoid in upward movements and the activations of posterior parts of deltoid in all four directions (p < 0.05. Therefore, with position-varying gravity compensation, the upper limb cable-based rehabilitation robotic system might assist subjects to perform movements with higher quality and

Creativity as an Attribute of Positive Psychology: The Impact of Positive and Negative Affect on the Creative Personality

Science.gov (United States)

Charyton, Christine; Hutchison, Shannon; Snow, Lindsay; Rahman, Mohammed A.; Elliott, John O.

2009-01-01

Positive psychology explores how optimism can lead to health, happiness, and creativity. However, questions remain as to how affective states influence creativity. Data on creative personality, optimism, pessimism, positive and negative affect, and current and usual happiness ratings were collected on 161 college students enrolled in an…

Controlled positioning of nanoparticles on graphene by noninvasive AFM lithography.

Science.gov (United States)

Bellido, Elena; Ojea-Jiménez, Isaac; Ghirri, Alberto; Alvino, Christian; Candini, Andrea; Puntes, Victor; Affronte, Marco; Domingo, Neus; Ruiz-Molina, Daniel

2012-08-21

Atomic force microscopy is shown to be an excellent lithographic technique to directly deposit nanoparticles on graphene by capillary transport without any previous functionalization of neither the nanoparticles nor the graphene surface while preserving its integrity and conductivity properties. Moreover this technique allows for (sub)micrometric control on the positioning thanks to a new three-step protocol that has been designed with this aim. With this methodology the exact target coordinates are registered by scanning the tip over the predetermined area previous to its coating with the ink and deposition. As a proof-of-concept, this strategy has successfully allowed the controlled deposition of few nanoparticles on 1 μm(2) preselected sites of a graphene surface with high accuracy.

Beam position monitor multiplexer controller upgrade at the LAMPF proton storage ring

International Nuclear Information System (INIS)

Scarborough, W.K.; Cohen, S.

1992-01-01

The beam position monitor (BPM) is one of the primary diagnostic tools used for the tuning of the proton storage ring (PSR) at the Clinton P. Anderson Meson Physics Facility (LAMPF). A replacement for the existing, monolithic, wire-wrapped microprocessor-based BPM multiplexer controller has been built. The controller has been redesigned as a modular system retaining the same functionality of the original system built in 1981. Individual printed circuit cards are used for each controller function to insure greater maintainability and ease of keeping a spare parts inventory. Programmable logic device technology has substantially reduced the component count of the new controller. Diagnostic software was written to support the development of the upgraded controller. The new software actually uncovered some flaws in the original CAMAC interface. (author)

Visual control improves the accuracy of hand positioning in Huntington’s disease

Directory of Open Access Journals (Sweden)

Emilia J. Sitek

2017-08-01

Full Text Available Background: The study aimed at demonstrating dependence of visual feedback during hand and finger positioning task performance among Huntington’s disease patients in comparison to patients with Parkinson’s disease and cervical dystonia. Material and methods: Eighty-nine patients participated in the study (23 with Huntington’s disease, 25 with Parkinson’s disease with dyskinesias, 21 with Parkinson’s disease without dyskinesias, and 20 with cervical dystonia, scoring ≥20 points on Mini-Mental State Examination in order to assure comprehension of task instructions. Neurological examination comprised of the motor section from the Unified Huntington’s Disease Rating Scale for Huntington’s disease, the Unified Parkinson’s Disease Rating Scale Part II–IV for Parkinson’s disease and the Toronto Western Spasmodic Torticollis Rating Scale for cervical dystonia. In order to compare hand position accuracy under visually controlled and blindfolded conditions, the patient imitated each of the 10 examiner’s hand postures twice, once under the visual control condition and once with no visual feedback provided. Results: Huntington’s disease patients imitated examiner’s hand positions less accurately under blindfolded condition in comparison to Parkinson’s disease without dyskinesias and cervical dystonia participants. Under visually controlled condition there were no significant inter-group differences. Conclusions: Huntington’s disease patients exhibit higher dependence on visual feedback while performing motor tasks than Parkinson’s disease and cervical dystonia patients. Possible improvement of movement precision in Huntington’s disease with the use of visual cues could be potentially useful in the patients’ rehabilitation.

78 FR 51078 - Reporting Requirements for Positive Train Control Expenses and Investments

Science.gov (United States)

2013-08-20

...] Reporting Requirements for Positive Train Control Expenses and Investments AGENCY: Surface Transportation... investments and expenses. PTC is an automated system designed to prevent train-to-train collisions and other..., PTC expenditures are incorporated into the R-1 under the category of ``capital investments and...

PIMS (Positioning In Macular hole Surgery) trial - a multicentre interventional comparative randomised controlled clinical trial comparing face-down positioning, with an inactive face-forward position on the outcome of surgery for large macular holes: study protocol for a randomised controlled trial.

Science.gov (United States)

Pasu, Saruban; Bunce, Catey; Hooper, Richard; Thomson, Ann; Bainbridge, James

2015-11-17

Idiopathic macular holes are an important cause of blindness. They have an annual incidence of 8 per 100,000 individuals, and prevalence of 0.2 to 3.3 per 1000 individuals with visual impairment. The condition occurs more frequently in adults aged 75 years or older. Macular holes can be repaired by surgery in which the causative tractional forces in the eye are released and a temporary bubble of gas is injected. To promote successful hole closure individuals may be advised to maintain a face-down position for up to 10 days following surgery. The aim of this study is to determine whether advice to position face-down improves the surgical success rate of closure of large (>400 μm) macular holes, and thereby reduces the need for further surgery. This will be a multicentre interventional, comparative randomised controlled clinical trial comparing face-down positioning with face-forward positioning. At the conclusion of standardised surgery across all sites, participants still eligible for inclusion will be allocated randomly 1:1 to 1 of the 2 treatment arms stratified by site, using random permuted blocks of size 4 or 6 in equal proportions. We will recruit 192 participants having surgery for large macular holes (>400 μm); 96 in each of the 2 arms of the study. The primary objective is to determine the impact of face-down positioning on the likelihood of closure of large (≥400 μm) full-thickness macular holes following surgery. This will be the first multicentre randomised control trial to investigate the value of face-down positioning following macular hole standardised surgery. UK CRN: 17966 (date of registration 26 November 2014).

Improving control of the coal industry

Energy Technology Data Exchange (ETDEWEB)

Valkovyy, V I; Ignatyev, B N

1982-01-01

Questions of organizing control of the coal industry based on the use of ACS are examined. Improvement of control of the sector is done in the following main trends: pinpointing the distribution of rights; duties and responsibilities within the associations; more complete calculation of the positions; standard structures of the mines, open pits and other production units of the specific operating conditions; improvement in the forms and methods of controlling specialized production units; formation of style and methods of leadership corresponding to the modern conditions of production.

Questionable Word Choice in Scientific Writing in Orthopedic Surgery

Directory of Open Access Journals (Sweden)

Casey M. O`Connor

2017-07-01

Full Text Available Background: Given the strong influence of thoughts, emotions, and behaviors on musculoskeletal symptoms andlimitations it’s important that both scientific and lay writing use the most positive, hopeful, and adaptive words andconcepts consistent with medical evidence. The use of words that might reinforce misconceptions about preferencesensitiveconditions (particularly those associated with age could increase symptoms and limitations and might alsodistract patients from the treatment preferences they would select when informed and at ease.Methods: We reviewed 100 consecutive papers published in 2014 and 2015 in 6 orthopedic surgery scientific journals.We counted the number and proportion of journal articles with questionable use of one or more of the following words:tear, aggressive, required, and fail. For each word, we counted the rate of misuse per journal and the number of specificterms misused per article per journalResults: Eighty percent of all orthopedic scientific articles reviewed had questionable use of at least one term. Tearwas most questionably used with respect to rotator cuff pathology. The words fail and require were the most commonquestionably used terms overall.Conclusion: The use of questionable words and concepts is common in scientific writing in orthopedic surgery. It’sworth considering whether traditional ways or referring to musculoskeletal illness merit rephrasing.

Online tracking: questioning the power of informed consent

NARCIS (Netherlands)

van Eijk, N.; Helberger, N.; Kool, L.; van der Plas, A.; van der Sloot, B.

2011-01-01

Online tracking technologies have raised considerable concerns regarding privacy and the protection of personal data of users. In order to help users to regain control over their personal data, Europe has amended its ePrivacy directive towards an opt-in regime. There are however many open questions

A 3D Printed Linear Pneumatic Actuator for Position, Force and Impedance Control

Directory of Open Access Journals (Sweden)

Jeremy Krause

2018-05-01

Full Text Available Although 3D printing has the potential to provide greater customization and to reduce the costs of creating actuators for industrial applications, the 3D printing of actuators is still a relatively new concept. We have developed a pneumatic actuator with 3D-printed parts and placed sensors for position and force control. So far, 3D printing has been used to create pneumatic actuators of the bellows type, thus having a limited travel distance, utilizing low pressures for actuation and being capable of only limited force production and response rates. In contrast, our actuator is linear with a large travel distance and operating at a relatively higher pressure, thus providing great forces and response rates, and this the main novelty of the work. We demonstrate solutions to key challenges that arise during the design and fabrication of 3D-printed linear actuators. These include: (1 the strategic use of metallic parts in high stress areas (i.e., the piston rod; (2 post-processing of the inner surface of the cylinder for smooth finish; (3 piston head design and seal placement for strong and leak-proof action; and (4 sensor choice and placement for position and force control. A permanent magnet placed in the piston head is detected using Hall effect sensors placed along the length of the cylinder to measure the position, and pressure sensors placed at the supply ports were used for force measurement. We demonstrate the actuator performing position, force and impedance control. Our work has the potential to open new avenues for creating less expensive, customizable and capable actuators for industrial and other applications.

Asking Questions in Academia

DEFF Research Database (Denmark)

Hansen, Annette Skovsted

2014-01-01

Motivation for the activity In academia the most important skill is to ask academically relevant and sound questions. This is not easy and students need to practice asking questions orally and in writing before they write research papers.......Motivation for the activity In academia the most important skill is to ask academically relevant and sound questions. This is not easy and students need to practice asking questions orally and in writing before they write research papers....

Determination of curve 1/M profile as a function of control rod bank position

International Nuclear Information System (INIS)

Pereira, Valmir; Martinez, Aquilino Senra; Silva, Fernando Carvalho da

2002-01-01

Determination of the subcritical multiplication curve profile (1/M) as a function of control rod bank position is of paramount importance to the development of a system which allows to foresee and also anticipate determination of criticality of a PWR reactor core. This work aims at determining this profile. For that, the 3D- two group-diffusion equations for a subcritical PWR reactor core with external neutron source is solved for different control rod bank positions. Results obtained are compared with the results from the corresponding eigenvalue problem, in order to verify how the external neutron source interferes with the reactor criticality search. (author)

Quantum dots for future nanophotonic devices : lateral ordering, position, and number control

NARCIS (Netherlands)

Nötzel, R.

2010-01-01

After the general aspects of InAs/InP (100) quantum dots (QDs) regarding the formation of QDs versus quantum dashes, wavelength tuning from telecom to mid-infrared region, and device applications, we discuss our recent progress on the lateral ordering, position, and number control of QDs.

Prone positioning in hypoxemic respiratory failure: meta-analysis of randomized controlled trials.

Science.gov (United States)

Kopterides, Petros; Siempos, Ilias I; Armaganidis, Apostolos

2009-03-01

Prone positioning is used to improve oxygenation in patients with hypoxemic respiratory failure (HRF). However, its role in clinical practice is not yet clearly defined. The aim of this meta-analysis was to assess the effect of prone positioning on relevant clinical outcomes, such as intensive care unit (ICU) and hospital mortality, days of mechanical ventilation, length of stay, incidence of ventilator-associated pneumonia (VAP) and pneumothorax, and associated complications. We used literature search of MEDLINE, Current Contents, and Cochrane Central Register of Controlled Trials. We focused only on randomized controlled trials reporting clinical outcomes in adult patients with HRF. Four trials met our inclusion criteria, including 662 patients randomized to prone ventilation and 609 patients to supine ventilation. The pooled odds ratio (OR) for the ICU mortality in the intention-to-treat analysis was 0.97 (95% confidence interval [CI], 0.77-1.22), for the comparison between prone and supine ventilated patients. Interestingly, the pooled OR for the ICU mortality in the selected group of the more severely ill patients favored prone positioning (OR, 0.34; 95% CI, 0.18-0.66). The duration of mechanical ventilation and the incidence of pneumothorax were not different between the 2 groups. The incidence of VAP was lower but not statistically significant in patients treated with prone positioning (OR, 0.81; 95% CI, 0.61-1.10). However, prone positioning was associated with a higher risk of pressure sores (OR, 1.49; 95% CI, 1.17-1.89) and a trend for more complications related to the endotracheal tube (OR, 1.30; 95% CI, 0.94-1.80). Despite the inherent limitations of the meta-analytic approach, it seems that prone positioning has no discernible effect on mortality in patients with HRF. It may decrease the incidence of VAP at the expense of more pressure sores and complications related to the endotracheal tube. However, a subgroup of the most severely ill patients may

Medical Students' Understanding of Directed Questioning by Their Clinical Preceptors.

Science.gov (United States)

Lo, Lawrence; Regehr, Glenn

2017-01-01

Phenomenon: Throughout clerkship, preceptors ask medical students questions for both assessment and teaching purposes. However, the cognitive and strategic aspects of students' approaches to managing this situation have not been explored. Without an understanding of how students approach the question and answer activity, medical educators are unable to appreciate how effectively this activity fulfills their purposes of assessment or determine the activity's associated educational effects. A convenience sample of nine 4th-year medical students participated in semistructured one-on-one interviews exploring their approaches to managing situations in which they have been challenged with questions from preceptors to which they do not know the answer. Through an iterative and recursive analytic reading of the interview transcripts, data were coded and organized to identify themes relevant to the students' considerations in answering such questions. Students articulated deliberate strategies for managing the directed questioning activity, which at times focused on the optimization of their learning but always included considerations of image management. Managing image involved projecting not only being knowledgeable but also being teachable. The students indicated that their considerations in selecting an appropriate strategy in a given situation involved their perceptions of their preceptors' intentions and preferences as well as several contextual factors. Insights: The medical students we interviewed were quite sophisticated in their understanding of the social nuances of the directed questioning process and described a variety of contextually invoked strategies to manage the situation and maintain a positive image.

Control of plasma poloidal shape and position in the DIII-D tokamak

International Nuclear Information System (INIS)

Walker, M.L.; Humphreys, D.A.; Ferron, J.R.

1997-11-01

Historically, tokamak control design has been a combination of theory driving an initial control design and empirical tuning of controllers to achieve satisfactory performance. This approach was in line with the focus of past experiments on simply obtaining sufficient control to study many of the basic physics issues of plasma behavior. However, in recent years existing experimental devices have required increasingly accurate control. New tokamaks such as ITER or the eventual fusion power plant must achieve and confine burning fusion plasmas, placing unprecedented demands on regulation of plasma shape and position, heat flux, and burn characteristics. Control designs for such tokamaks must also function well during initial device operation with minimal empirical optimization required. All of these design requirements imply a heavy reliance on plasma modeling and simulation. Thus, plasma control design has begun to use increasingly modern and sophisticated control design methods. This paper describes some of the history of plasma control for the DIII-D tokamak as well as the recent effort to implement modern controllers. This effort improves the control so that one may obtain better physics experiments and simultaneously develop the technology for designing controllers for next-generation tokamaks

Improving Student Question Classification

Science.gov (United States)

Heiner, Cecily; Zachary, Joseph L.

2009-01-01

Students in introductory programming classes often articulate their questions and information needs incompletely. Consequently, the automatic classification of student questions to provide automated tutorial responses is a challenging problem. This paper analyzes 411 questions from an introductory Java programming course by reducing the natural…

Railway cognitive radio to enhance safety, security, and performance of positive train control.

Science.gov (United States)

2013-02-01

Robust and interoperable wireless communications are vital to Positive Train Control (PTC). The railway industry has started adopting software-defined radios (SDRs) for packet-data transmission. SDR systems realize previously fixed components as reco...

Approximation-Based Discrete-Time Adaptive Position Tracking Control for Interior Permanent Magnet Synchronous Motors.

Science.gov (United States)

Yu, Jinpeng; Shi, Peng; Yu, Haisheng; Chen, Bing; Lin, Chong

2015-07-01

This paper considers the problem of discrete-time adaptive position tracking control for a interior permanent magnet synchronous motor (IPMSM) based on fuzzy-approximation. Fuzzy logic systems are used to approximate the nonlinearities of the discrete-time IPMSM drive system which is derived by direct discretization using Euler method, and a discrete-time fuzzy position tracking controller is designed via backstepping approach. In contrast to existing results, the advantage of the scheme is that the number of the adjustable parameters is reduced to two only and the problem of coupling nonlinearity can be overcome. It is shown that the proposed discrete-time fuzzy controller can guarantee the tracking error converges to a small neighborhood of the origin and all the signals are bounded. Simulation results illustrate the effectiveness and the potentials of the theoretic results obtained.

Longitudinal investigation on learned helplessness tested under negative and positive reinforcement involving stimulus control.

Science.gov (United States)

Oliveira, Emileane C; Hunziker, Maria Helena

2014-07-01

In this study, we investigated whether (a) animals demonstrating the learned helplessness effect during an escape contingency also show learning deficits under positive reinforcement contingencies involving stimulus control and (b) the exposure to positive reinforcement contingencies eliminates the learned helplessness effect under an escape contingency. Rats were initially exposed to controllable (C), uncontrollable (U) or no (N) shocks. After 24h, they were exposed to 60 escapable shocks delivered in a shuttlebox. In the following phase, we selected from each group the four subjects that presented the most typical group pattern: no escape learning (learned helplessness effect) in Group U and escape learning in Groups C and N. All subjects were then exposed to two phases, the (1) positive reinforcement for lever pressing under a multiple FR/Extinction schedule and (2) a re-test under negative reinforcement (escape). A fourth group (n=4) was exposed only to the positive reinforcement sessions. All subjects showed discrimination learning under multiple schedule. In the escape re-test, the learned helplessness effect was maintained for three of the animals in Group U. These results suggest that the learned helplessness effect did not extend to discriminative behavior that is positively reinforced and that the learned helplessness effect did not revert for most subjects after exposure to positive reinforcement. We discuss some theoretical implications as related to learned helplessness as an effect restricted to aversive contingencies and to the absence of reversion after positive reinforcement. This article is part of a Special Issue entitled: insert SI title. Copyright © 2014. Published by Elsevier B.V.

Control parameters of the martian dune field positions at planetary scale: tests by the MCD

Science.gov (United States)

allemand, pascal

2016-04-01

The surface of Mars is occupied by more than 500 dunes fields mainly located inside impact craters of the south hemisphere and near the north polar cap. The questions of the activity of martian dunes and of the localization of the martian dune fields are not completely solved. It has been demonstrated recently by image observation and image correlation that some of these dune fields are clearly active. The sand flux of one of them has been even estimated. But there is no global view of the degree of activity of each the dune fields. (2)The topography of impact craters in which dune fields are localized is an important factor of their position. But there is no consensus of the effect of global atmospheric circulation on dune field localization. These two questions are addressed using the results of Mars Climate Database 5.2 (MCD) (Millour, 2015; Forget et al., 1999). The wind fields of the MCD have been first validated against the observations made on active dune fields. Using a classical transport law, the Drift Potential (DP) and the Relative Drift Potential (RDP) have been computed for each dune fields. A good correlation exists between the position of dune fields and specific values of these two parameters. The activity of each dune field is estimated from these parameters and tested on some examples by image observations. Finally a map of sand flow has been computed at the scale of the planet. This map shows that sand and dust is trapped in specific regions. These regions correspond to the area of dune field concentration.

Reciprocal associations between positive emotions and motivation in daily life: Network analyses in anhedonic individuals and healthy controls.

Science.gov (United States)

van Roekel, Eeske; Heininga, Vera E; Vrijen, Charlotte; Snippe, Evelien; Oldehinkel, Albertine J

2018-04-19

Anhedonia reflects a dysfunction in the reward system, which can be manifested in an inability to enjoy pleasurable situations (i.e., lack of positive emotions), but also by a lack of motivation to engage in pleasurable activities (i.e., lack of motivation). Little is known about the interrelations between positive emotions and motivation in daily life, and whether these associations are altered in anhedonic individuals. In the present study, we used a network approach to explore the reciprocal, lagged associations between positive emotions and motivation in anhedonic individuals (N = 66) and controls (N = 68). Participants (aged between 18 and 24 years) filled out momentary assessments of affect 3 times per day for 30 consecutive days. Our results showed that (a) anhedonic individuals and controls had similar moment-to-moment transfer of positive emotions; (b) in the anhedonic network feeling cheerful was the node with the highest outstrength, both within this group and compared with the control group; (c) feeling relaxed had the highest outstrength in the control network, and (d) anhedonic individuals had stronger pathways from positive emotions to motivation than controls. Taken together, our findings suggest that low levels of positive emotions lead to decreased motivation in the anhedonic group, which could instigate a negative spiral of low pleasure and low motivation. On a more positive note, we showed that cheerfulness had the highest outstrength in the network of anhedonic participants. Hence, interventions may focus on increasing cheerfulness in anhedonic individuals, as this will likely have the greatest impact on other positive emotions and motivations. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Areva: questions about a champion

International Nuclear Information System (INIS)

Bottois, P.

2009-01-01

Siemens announced in January 26, 2009 its decision to leave Areva NP, i.e. the Areva/Siemens common daughter company for reactors. This news re-launches the questions about the long-term financing strategy of the Areva group, of its capitalistic partnerships and of its position in the world nuclear market. Siemens on its side wishes to preserve its position in this market and a possible cooperation with the Russian AtomEnergoProm is under discussion. Areva, the world leader of nuclear industry, integrates a mining activity as well and is the world number 3 of uranium exploitation (15% of the world offer). It wishes to double its production by 2012 thanks to big investments in Niger, Namibia and Canada. Areva is developing its enrichment capacities as well thanks to the future Georges-Besse II ultracentrifugation facility which is under construction at Tricastin (Drome, France) and which should be put into service in 2009. And finally, a second EPR (European pressurized reactor), the new generation of Areva reactors, is to be built at Penly (Haute Normandie, France) between 2012 and 2017 and will generate 1400 employments in the region. (J.S.)

Guided Discovery with Socratic Questioning

Directory of Open Access Journals (Sweden)

M. Hakan Türkçapar

2015-04-01

Full Text Available “The Socratic method” is a way of teaching philosophical thinking and knowledge by asking questions. It was first used by in ancient times by the Greek philosopher Socrates who taught his followers by asking questions; these conversations between them are known as “Socratic dialogues”. In this methodology, no new knowledge is taught to the individual; rather, the individual is guided to remember and rediscover what was formerly known through this process. The main method used in cognitive therapy is guided discovery. There are various methods of guided discovery in cognitive therapy. The form of verbal exchange between the therapist and client which is used during the process of cognitive behavioral therapy is known as “socratic questioning”. In this method the goal is to make the client rediscover, with a series of questions, a piece of knowledge which he could otherwise know but is not presently conscious of. The Socratic Questioning consists of several steps, including: identifying the problem by listening to the client and making reflections, finding alternatives by examining and evaluating, reidentification by using the newly rediscovered information and questioning the old distorted belief, and reaching a new conclusion and applying it. Question types used during these procedures are: questions for collecting information, questions revealing meanings, questions revealing beliefs, questions about behaviours during similar past experiences, analytic questions and analytic synthesis questions. In order to make the patient feel understood, it is important to be empathetic and summarize the problem during the interview. In this text, steps of Socratic Questioning-Guided Discovery will be reviewed with sample dialogues provided for each step. [JCBPR 2015; 4(1.000: 47-53

Position control of an electro-pneumatic system based on PWM technique and FLC.

Science.gov (United States)

Najjari, Behrouz; Barakati, S Masoud; Mohammadi, Ali; Futohi, Muhammad J; Bostanian, Muhammad

2014-03-01

In this paper, modeling and PWM based control of an electro-pneumatic system, including the four 2-2 valves and a double acting cylinder are studied. Dynamic nonlinear behavior of the system, containing fast switching solenoid valves and a pneumatic cylinder, as well as electrical, magnetic, mechanical, and fluid subsystems are modeled. A DC-DC power converter is employed to improve solenoid valve performance and suppress system delay. Among different position control methods, a proportional integrator derivative (PID) controller and fuzzy logic controller (FLC) are evaluated. An experimental setup, using an AVR microcontroller is implemented. Simulation and experimental results verify the effectiveness of the proposed control strategies. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

Fault Tolerant Position-mooring Control for Offshore Vessels

DEFF Research Database (Denmark)

Blanke, Mogens; Nguyen, Trong Dong

2018-01-01

Fault-tolerance is crucial to maintain safety in offshore operations. The objective of this paper is to show how systematic analysis and design of fault-tolerance is conducted for a complex automation system, exemplified by thruster assisted Position-mooring. Using redundancy as required....... Functional faults that are only detectable, are rendered isolable through an active isolation approach. Once functional faults are isolated, they are handled by fault accommodation techniques to meet overall control objectives specified by class requirements. The paper illustrates the generic methodology...... by a system to handle faults in mooring lines, sensors or thrusters. Simulations and model basin experiments are carried out to validate the concept for scenarios with single or multiple faults. The results demonstrate that enhanced availability and safety are obtainable with this design approach. While...

Epistemology: 5 Questions

DEFF Research Database (Denmark)

Epistemology: 5 Questions is a collection of short interviews based on 5 questions presented to some of the most influential and prominent scholars in epistemology. We hear their views on epistemology with particular emphasis on the intersection between mainstream and formal approaches to the field...

Global stabilisation of large-scale hydraulic networks with quantised and positive proportional controls

DEFF Research Database (Denmark)

Jensen, Tom Nørgaard; Wisniewski, Rafal

2013-01-01

a set of decentralised, logarithmic quantised and constrained control actions with properly designed quantisation parameters. That is, an attractor set with a compact basin of attraction exists. Subsequently, the basin can be increased by increasing the control gains. In our work, this result...... is extended by showing that an attractor set with a global basin of attraction exists for arbitrary values of positive control gains, given that the upper level of the quantiser is properly designed. Furthermore, the proof is given for general monotone quantisation maps. Since the basin of attraction...

A satellite digital controller or 'play that PID tune again, Sam'. [Position, Integral, Derivative feedback control algorithm for design strategy

Science.gov (United States)

Seltzer, S. M.

1976-01-01

The problem discussed is to design a digital controller for a typical satellite. The controlled plant is considered to be a rigid body acting in a plane. The controller is assumed to be a digital computer which, when combined with the proposed control algorithm, can be represented as a sampled-data system. The objective is to present a design strategy and technique for selecting numerical values for the control gains (assuming position, integral, and derivative feedback) and the sample rate. The technique is based on the parameter plane method and requires that the system be amenable to z-transform analysis.

Positioning performance of a maglev fine positioning system

Energy Technology Data Exchange (ETDEWEB)

Wronosky, J.B.; Smith, T.G.; Jordan, J.D.; Darnold, J.R.

1996-12-01

A wafer positioning system was recently developed by Sandia National Laboratories for an Extreme Ultraviolet Lithography (EUVL) research tool. The system, which utilizes a magnetically levitated fine stage to provide ultra-precise positioning in all six degrees of freedom, incorporates technological improvements resulting from four years of prototype development experience. System enhancements, implemented on a second generation design for an ARPA National Center for Advanced Information Component Manufacturing (NCAICM) project, introduced active structural control for the levitated structure of the system. Magnetic levitation (maglev) is emerging as an important technology for wafer positioning systems in advanced lithography applications. The advantages of maglev stem from the absence of physical contact. The resulting lack of friction enables accurate, fast positioning. Maglev systems are mechanically simple, accomplishing full six degree-of-freedom suspension and control with a minimum of moving parts. Power-efficient designs, which reduce the possibility of thermal distortion of the platen, are achievable. Manufacturing throughput will be improved in future systems with the addition of active structural control of the positioning stages. This paper describes the design, implementation, and functional capability of the maglev fine positioning system. Specifics regarding performance design goals and test results are presented.

Zigbee networking technology and its application in Lamost optical fiber positioning and control system

Science.gov (United States)

Jin, Yi; Zhai, Chao; Gu, Yonggang; Zhou, Zengxiang; Gai, Xiaofeng

2010-07-01

4,000 fiber positioning units need to be positioned precisely in LAMOST(Large Sky Area Multi-object Optical Spectroscopic Telescope) optical fiber positioning & control system, and every fiber positioning unit needs two stepper motors for its driven, so 8,000 stepper motors need to be controlled in the entire system. Wireless communication mode is adopted to save the installing space on the back of the focal panel, and can save more than 95% external wires compared to the traditional cable control mode. This paper studies how to use the ZigBee technology to group these 8000 nodes, explores the pros and cons of star network and tree network in order to search the stars quickly and efficiently. ZigBee technology is a short distance, low-complexity, low power, low data rate, low-cost two-way wireless communication technology based on the IEEE 802.15.4 protocol. It based on standard Open Systems Interconnection (OSI): The 802.15.4 standard specifies the lower protocol layers-the physical layer (PHY), and the media access control (MAC). ZigBee Alliance defined on this basis, the rest layers such as the network layer and application layer, and is responsible for high-level applications, testing and marketing. The network layer used here, based on ad hoc network protocols, includes the following functions: construction and maintenance of the topological structure, nomenclature and associated businesses which involves addressing, routing and security and a self-organizing-self-maintenance functions which will minimize consumer spending and maintenance costs. In this paper, freescale's 802.15.4 protocol was used to configure the network layer. A star network and a tree network topology is realized, which can build network, maintenance network and create a routing function automatically. A concise tree network address allocate algorithm is present to assign the network ID automatically.

The controversy over food irradiation ''open questions'' and reliable answers

International Nuclear Information System (INIS)

Diehl, J.F.

1992-01-01

During the 1950s and 60s, when ''going nuclear'' was the thing, research and development in the area of food irradiation was generously supported by governments, and was reported by the media with a very positive attitude. In the wake of the antinuclear movement that swept many countries in the 70s and 80s, food irradiation generally had a bad press and governmental support for R and D in this area was reduced more and more. In the meantime, the new technology has become a commerical reality in countries like Belgium, France and the Netherlands. In other countries, Germany for instance, the frightening claims of the opponents that irradiated foods are bad for health and nutritionally worthless - have been gradually replaced by the view: ''There are still too many open questions. A moratorium on food irradiation must be proclaimed until all the questions have been answered''. A situation where no more questions can be asked, will never be reached. However, reliable answers can be given to the important questions concerning nutritional and health quality of irradiated food, and environmental safety, technical efficacy, and economic feasibility of the process. The question that is stipp open, at least in some countries, is to what extent consumers, confused by conflicting claims of opponents and proponents and often misinformed about the difference between radiation and radioactivity, will buy foods labelled ''irradiated''. (orig.) [de

On framing the research question and choosing the appropriate research design.

Science.gov (United States)

Parfrey, Patrick S; Ravani, Pietro

2015-01-01

Clinical epidemiology is the science of human disease investigation with a focus on diagnosis, prognosis, and treatment. The generation of a reasonable question requires definition of patients, interventions, controls, and outcomes. The goal of research design is to minimize error, to ensure adequate samples, to measure input and output variables appropriately, to consider external and internal validities, to limit bias, and to address clinical as well as statistical relevance. The hierarchy of evidence for clinical decision-making places randomized controlled trials (RCT) or systematic review of good quality RCTs at the top of the evidence pyramid. Prognostic and etiologic questions are best addressed with longitudinal cohort studies.

Robust H∞ Control of Neutral System with Time-Delay for Dynamic Positioning Ships

Directory of Open Access Journals (Sweden)

Dawei Zhao

2015-01-01

Full Text Available Due to the input time-delay existing in most thrust systems of the ships, the robust H∞ controller is designed for the ship dynamic positioning (DP system with time-delay. The input delay system is turned to a neutral time-delay system by a state-derivative control law. The less conservative result is derived for the neutral system with state-derivative feedback by the delay-decomposition approach and linear matrix inequality (LMI. Finally, the numerical simulations demonstrate the asymptotic stability and robustness of the controller and verify that the designed DP controller is effective in the varying environment disturbances of wind, waves, and ocean currents.

Teacher's Questions in Reading Classes

Directory of Open Access Journals (Sweden)

Zuliati Rohmah

2002-01-01

Full Text Available Abstract: The present paper discusses an English teacher's questions in Reading classes at MAN Malang III. Types of questions, functions of teacher's questions, question levels and the strategies applied by the teacher were put as the research problems. Non-participant observa­tion was applied to collect the data with the researcher as the main in­strument aided by field-notes and a tape recorder. It was found that the distribution of the questions did not allow the students to talk longer and to think more analytically. Meanwhile, the strategies applied by the teacher helped the students to respond to the questions previously unanswered. The teacher is suggested to produce more open and refer­ential question as well as inference and evaluation questions as to give more chances for the students to think aloud more.

Interventions before consultations to help patients address their information needs by encouraging question asking: systematic review.

Science.gov (United States)

Kinnersley, Paul; Edwards, Adrian; Hood, Kerry; Ryan, Rebecca; Prout, Hayley; Cadbury, Naomi; MacBeth, Fergus; Butow, Phyllis; Butler, Christopher

2008-07-16

To assess the effects on patients, clinicians, and the healthcare system of interventions before consultations to help patients or their representatives gather information in consultations by question asking. Systematic review with meta-analysis. Electronic literature searches of seven databases and hand searching of one journal and bibliographies of relevant articles. Review methods Inclusion criteria included randomised controlled trials. Primary outcomes were question asking; patients' anxiety, knowledge, and satisfaction; and length of consultation. 33 randomised trials of variable quality involving 8244 patients were identified. A few studies showed positive effects. Meta-analyses showed small and statistically significantly increases in question asking (standardised mean difference 0.27, 95% confidence interval 0.19 to 0.36) and patients' satisfaction (0.09, 0.03 to 0.16). Non-statistically significant changes occurred in patients' anxiety before consultations (weighted mean difference -1.56, -7.10 to 3.97), patients' anxiety after consultations (standardised mean difference -0.08, -0.22 to 0.06), patients' knowledge (-0.34, -0.94 to 0.25), and length of consultation (0.10, -0.05 to 0.25). Interventions comprising written materials had similar effects on question asking, consultation length, and patients' satisfaction as those comprising the coaching of patients. Interventions with additional training of clinicians had little further effect than those targeted at patients alone for patients' satisfaction and consultation length. Interventions for patients before consultations produce small benefits for patients. This may be because patients and clinicians have established behaviours in consultations that are difficult to change. Alternatively small increases in question asking may not be sufficient to make notable changes to other outcomes.

Managing Work and Family: Do Control Strategies Help?

Science.gov (United States)

Versey, H. Shellae

2015-01-01

How can we effectively manage competing obligations from work and family without becoming overwhelmed? This question inspires the current study by examining control strategies that may facilitate better work-life balance, with a specific focus on the role of lowered aspirations and positive reappraisals, attitudes that underlie adaptive coping…

The Priority of the Question: Focus Questions for Sustained Reasoning in Science

Science.gov (United States)

Lustick, David

2010-08-01

Science education standards place a high priority on promoting the skills and dispositions associated with inquiry at all levels of learning. Yet, the questions teachers employ to foster sustained reasoning are most likely borrowed from a textbook, lab manual, or worksheet. Such generic questions generated for a mass audience, lack authenticity and contextual cues that allow learners to immediately appreciate a question’s relevance. Teacher queries intended to motivate, guide, and foster learning through inquiry are known as focus questions. This theoretical article draws upon science education research to present a typology and conceptual framework intended to support science teacher educators as they identify, develop, and evaluate focus questions with their students.

Augmenting Fellow Education Through Spaced Multiple-Choice Questions.

Science.gov (United States)

Barsoumian, Alice E; Yun, Heather C

2018-01-01

. Fellows consistently indicated that the platform was "highly enjoyed," "beneficial," a "fun format," and "completely satisfied." Fellows additionally commented that they desired more questions and considered the platform helpful in board preparation. Formal survey data post-intervention found that the fellows were satisfied with the new approach, found it to be useful in board preparation, overall educational value, and in-line with their personal learning style (median Likert score of 4 for all queries). Fellows were satisfied with time commitment, spending a mean of 47 min on the spaced education curriculum questions per month. Introduction of a spaced education curriculum resulted in a sustained positive learner experience for >5 yr with demonstrated mastery of material. Spaced education learning is a viable addition to augment training experience, especially in areas of curricular gaps such as operational medicine. Correct answer data may also be useful to perform Accreditation Council for Graduate Medical Education-required objective assessment of knowledge. Published by Oxford University Press on behalf of the Association of Military Surgeons of the United States 2017. This work is written by (a) US Government employee(s) and is in the public domain in the US.

Neural network control of focal position during time-lapse microscopy of cells.

Science.gov (United States)

Wei, Ling; Roberts, Elijah

2018-05-09

Live-cell microscopy is quickly becoming an indispensable technique for studying the dynamics of cellular processes. Maintaining the specimen in focus during image acquisition is crucial for high-throughput applications, especially for long experiments or when a large sample is being continuously scanned. Automated focus control methods are often expensive, imperfect, or ill-adapted to a specific application and are a bottleneck for widespread adoption of high-throughput, live-cell imaging. Here, we demonstrate a neural network approach for automatically maintaining focus during bright-field microscopy. Z-stacks of yeast cells growing in a microfluidic device were collected and used to train a convolutional neural network to classify images according to their z-position. We studied the effect on prediction accuracy of the various hyperparameters of the neural network, including downsampling, batch size, and z-bin resolution. The network was able to predict the z-position of an image with ±1 μm accuracy, outperforming human annotators. Finally, we used our neural network to control microscope focus in real-time during a 24 hour growth experiment. The method robustly maintained the correct focal position compensating for 40 μm of focal drift and was insensitive to changes in the field of view. About ~100 annotated z-stacks were required to train the network making our method quite practical for custom autofocus applications.

Evaluation of significance of positive familial history in prevalence of hypertension in Isfahan

Directory of Open Access Journals (Sweden)

Tavassoli A

1997-09-01

Full Text Available Hypertension is one of the most important modifiable risk factors of vascular heart disease. Control of hypertension in different age groups has a significant effect upon the control and prevention of vascular heart disease. A familial pattern is observed in the distribution of blood pressure in different societies. Family history of hypertension has a profound effect on the future risk of developing hypertension. The blood pressure of approximately 8150 inhabitants of Isfahan aged above 18 years was measured during 1993-94. Blood pressure measurements were performed according to the standards set by WHO i.e., on two separate occasions, in the sitting position, and from both arms. A questionnaire was completed consisting of 26 questions, including questions regarding history of hypertension in first and second-degree relatives. Cases with a blood pressure of 140/90 mmHg or more, were referred to the Cardiovascular Research Center of Isfahan for further evaluation. Mean systolic and diastolic blood pressure was higher in cases with a positive family history of hypertension. In this study, 37.4% of the men with hypertension and 45.4% of hypertensive women had positive history of hypertension in first-degree relatives. The association between positive family history and hypertension was not significant in men (P=0.62, but it was significant in women (P=0.000. This difference was less pronounced in the older age groups, which could be explained by the illiteracy of most of the older cases and their ignorance of the existence of hypertension in family members. After correcting for the effects of confounding factors, it appears that positive family history has a stronger association with the development of hypertension in women. Moreover, positive family history is a strong prognostic factor in the likelihood of hypertension in the children of affected cases. These findings emphasize the importance of routine blood pressure measurement in children and

A Positive Control for Detection of Functional CD4 T Cells in PBMC: The CPI Pool.

Science.gov (United States)

Schiller, Annemarie; Zhang, Ting; Li, Ruliang; Duechting, Andrea; Sundararaman, Srividya; Przybyla, Anna; Kuerten, Stefanie; Lehmann, Paul V

2017-12-07

Testing of peripheral blood mononuclear cells (PBMC) for immune monitoring purposes requires verification of their functionality. This is of particular concern when the PBMC have been shipped or stored for prolonged periods of time. While the CEF (Cytomegalo-, Epstein-Barr and Flu-virus) peptide pool has become the gold standard for testing CD8 cell functionality, a positive control for CD4 cells is so far lacking. The latter ideally consists of proteins so as to control for the functionality of the antigen processing and presentation compartments, as well. Aiming to generate a positive control for CD4 cells, we first selected 12 protein antigens from infectious/environmental organisms that are ubiquitous: Varicella, Influenza, Parainfluenza, Mumps, Cytomegalovirus, Streptococcus , Mycoplasma , Lactobacillus , Neisseria , Candida , Rubella, and Measles. Of these antigens, three were found to elicited interferon (IFN)-γ-producing CD4 cells in the majority of human test subjects: inactivated cytomegalo-, parainfluenza-, and influenza virions (CPI). While individually none of these three antigens triggered a recall response in all donors, the pool of the three (the 'CPI pool'), did. One hundred percent of 245 human donors tested were found to be CPI positive, including Caucasians, Asians, and African-Americans. Therefore, the CPI pool appears to be suitable to serve as universal positive control for verifying the functionality of CD4 and of antigen presenting cells.

Use of a single alcohol screening question to identify other drug use.

Science.gov (United States)

Smith, Peter C; Cheng, Debbie M; Allensworth-Davies, Donald; Winter, Michael R; Saitz, Richard

2014-06-01

People who consume unhealthy amounts of alcohol are more likely to use illicit drugs. We tested the ability of a screening test for unhealthy alcohol use to simultaneously detect drug use. Adult English speaking patients (n=286) were enrolled from a primary care waiting room. They were asked the screening question for unhealthy alcohol use "How many times in the past year have you had X or more drinks in a day?", where X is 5 for men and 4 for women, and a response of one or more is considered positive. A standard diagnostic interview was used to determine current (past year) drug use or a drug use disorder (abuse or dependence). Oral fluid testing was also used to detect recent use of common drugs of abuse. The single screening question for unhealthy alcohol use was 67.6% sensitive (95% confidence interval [CI], 50.2-82.0%) and 64.7% specific (95% CI, 58.4-70.6%) for the detection of a drug use disorder. It was similarly insensitive for drug use detected by oral fluid testing and/or self-report. Although a patient with a drug use disorder has twice the odds of screening positive for unhealthy alcohol use compared to one without a drug use disorder, suggesting patients who screen positive for alcohol should be asked about drug use, a single screening question for unhealthy alcohol use was not sensitive or specific for the detection of other drug use or drug use disorders in a sample of primary care patients. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Testing audiovisual comprehension tasks with questions embedded in videos as subtitles: a pilot multimethod study

Directory of Open Access Journals (Sweden)

Juan Carlos Casañ Núñez

2017-06-01

Full Text Available Listening, watching, reading and writing simultaneously in a foreign language is very complex. This paper is part of wider research which explores the use of audiovisual comprehension questions imprinted in the video image in the form of subtitles and synchronized with the relevant fragments for the purpose of language learning and testing. Compared to viewings where the comprehension activity is available only on paper, this innovative methodology may provide some benefits. Among them, it could reduce the conflict in visual attention between watching the video and completing the task, by spatially and temporally approximating the questions and the relevant fragments. The technique is seen as especially beneficial for students with a low proficiency language level. The main objectives of this study were to investigate if embedded questions had an impact on SFL students’ audiovisual comprehension test performance and to find out what examinees thought about them. A multimethod design (Morse, 2003 involving the sequential collection of three quantitative datasets was employed. A total of 41 learners of Spanish as a foreign language (SFL participated in the study (22 in the control group and 19 in the experimental one. Informants were selected by non-probabilistic sampling. The results showed that imprinted questions did not have any effect on test performance. Test-takers’ attitudes towards this methodology were positive. Globally, students in the experimental group agreed that the embedded questions helped them to complete the tasks. Furthermore, most of them were in favour of having the questions imprinted in the video in the audiovisual comprehension test of the final exam. These opinions are in line with those obtained in previous studies that looked into experts’, SFL students’ and SFL teachers’ views about this methodology (Casañ Núñez, 2015a, 2016a, in press-b. On the whole, these studies suggest that this technique has

Tobacco control and the World Trade Organization: mapping member states' positions after the framework convention on tobacco control.