WorldWideScience

Sample records for position model blumer

  1. Caught in the Middle: Understanding Asian Pacific American Perspectives on Affirmative Action through Blumer's Group Position Theory.

    Science.gov (United States)

    Inkelas, Karen Kurotsuchi

    2003-01-01

    This study examines Asian Pacific American undergraduates' views on affirmative action and their perspectives on U.S. race relations through Herbert Blumer's (1958) theory of group position. Results indicate that Asian Pacific American (APA) students may perceive other minority student applicants as inferior to APA applicants and feel threatened…

  2. Erving Goffmans Kaderanalyse: een Negatie van Herbert Blumers Symbolisch Interactionisme

    OpenAIRE

    Verhoeven, Jef

    1983-01-01

    Goffmans sociologie wordt dikwijls symbolisch interactionistisch genoemd. Om dit probleem te onderzoeken werd het werk van Goffman vergeleken met de visie van Blumer over het symbolisch interactionisme. Er wordt aangetoond dat Goffmans kaderanalyse, uitgewerkt in Frame Analysis (1974), reeds in zijn vroegere werken aanwezig was en dat deze benadering een andere bedoeling heeft dan het symbolisch interactionisme. In het artikel wordt verduidelijkt dat beide auteurs vertrekken van een ged...

  3. A metateoria social de Herbert Blumer: esboço para uma reconstrução metodológica do interacionismo simbólico

    OpenAIRE

    Henrique Nagashima Milanello

    2014-01-01

    Este trabalho é uma tentativa de reconstrução metodológica parcial do pensamento de Herbert Blumer e de seu interacionismo simbólico sob a luz da polêmica entre causalidade e compreensão, que emerge no seio das discussões acerca da natureza das explicações nas ciências sociais. Assim, tem-se enfocado principalmente sua tese de doutorado, Method in Social Psychology, a fim de deslindar a concatenação dos elementos explícitos e implícitos de fundamentação ontológica, epistemológica e lógica em ...

  4. Methodological and metascientific problems in symbolic interactionism: a report on the opinions of third generation symbolic interactionists

    OpenAIRE

    Verhoeven, Jef

    1995-01-01

    This project is not an introduction, nor an inquiry into the relations of H. Blumer with G.H. Mead and the other pragmatists. I'll rather omit the first period of S.I. and study the connection between H. Blumer and his students. Blumer was stressing the main steps a researcher must take to meet the standards of a more critical approach than positivists were used to. His students were the first generation who tried to apply these principles. Blumer himself didn't publish a ...

  5. The Humanbecoming theory as a reinterpretation of the symbolic interactionism: a critique of its specific nature and scientific underpinnings.

    Science.gov (United States)

    Tapp, Diane; Lavoie, Mireille

    2017-04-01

    Discussions about real knowledge contained in grand theories and models seem to remain an active quest in the academic sphere. The most fervent of these defendants is Rosemarie Parse with her Humanbecoming School of Thought (1981, 1998). This article first highlights the similarities between Parse's theory and Blumer's symbolic interactionism (1969). This comparison will act as a counterargument to Parse's assertions that her theory is original 'nursing' material. Standing on the contemporary philosophy of science, the very possibility for discovering specific nursing knowledge will be questioned. Second, Parse's scientific assumptions will be thoroughly addressed and contrasted with Blumer's more moderate view of knowledge. It will lead to recognize that the valorization of the social nature of existence and reality does not necessarily induce requirements and methods such as those proposed by Parse. According to Blumer's point of view, her perspective may not even be desirable. Recommendations will be raised about the necessity for a distanced relationship to knowledge, being the key to the pursuit of its improvement, not its circular contemplation. © 2016 John Wiley & Sons Ltd.

  6. The Communications of Influence through Technology-Enabled Media

    Science.gov (United States)

    2006-12-01

    meaning, communication, action, and contextual structures, resources, or frameworks-such as those discussed in Blumer’s (1969) symbolic interactionism or...Blumer, H. (1969). Symbolic interactionism : Perspective and method. Englewood Cliffs, NJ: Prentice-Hall. Brass, D. J., & Burkhardt, M. E. (1993...and Interaction ................................................................ 42 3. Symbolic Exchange of Influence Messages

  7. Fundamental Skills Needs Assessment Methods

    Science.gov (United States)

    1992-05-01

    sociology of knowledge, (3) reference group theory, and (4) symbolic interactionism . These processes are discussed in the following paragraphs. Role...which individuals comprehend and interpret external and internal reality. Symbolic Interactionism . The final sodal factor shaping identity and thought...is symbolic interactionism . Several distinct theories of symbolic interaction exist. The term was coined by Blumer (1969). In Blumer’s view

  8. Symbolic Interactionism and Social Action Theory

    Science.gov (United States)

    Morrione, Thomas J.

    1975-01-01

    An explanation and elaboration of existing theory on interaction, this article describes a point of convergence between Parsons' Voluntaristic Theory of Action and Blumer's conceptualization of Symbolic Interactionism and develops specific problems of divergence in these normative and interpretive models of interaction. (JC)

  9. The Design and Analysis of Efficient Learning Algorithms

    Science.gov (United States)

    1991-01-01

    31] describe in detail how this can be done efficiently; see also Duda and Hart [22]. Let a&,..., &d be the resulting solution, and let h0 = Fd=1 af...Measure. Wiley, second edition, 1986. [13] Anselm Blumer, Andrzej Ehrenfeucht, David Haussler, and Manfred K. Warmuth. Occam’s razor. Information...Processing Letters, 24(6):377-380, April 1987. [14] Anselm Blumer, Andrzej Ehrenfeucht, David Haussler, and Manfred K. Warmuth. Learn- ability and the

  10. 音楽によるコミュニケーションの成立をめざした歌唱指導の構想 : H.ブルーマーのシンボリック相互作用論とJ.デューイのコミュニケーション論に基づいて

    OpenAIRE

    長島, 真人

    2009-01-01

    This paper is aimed to discuss points to keep in mind about the teaching of singing, on the basis of H. Blumer's symbolic interactionism and J. Dewey's theory of communication.Children learn music, supported by the communication through music. According to Blumer, "human beings in interacting with one another have to take account of what each other is doing or is about to do." According to Dewey, human beings who communicate with one another have to mutually anticipate and understand the othe...

  11. Some Thoughts (and Afterthoughts) on Context, Interpretation, and Organization Theory.

    Science.gov (United States)

    1982-02-01

    viewpoint can be cast as symbolic interactionism (Blumer, 1969) but it is a viewpoint with many variations (Rock, 1979). 1 seek my own intellectual models in... Symbolic interactionism : Perspective and method. Englewood Cliffs, New Jersey: Prentice-Hall, 1969. Burrell, G. and Morgan, G. Sociological paradigms and...making of symbolic interactionism . London: Macmillan, 1979. Salancik, G.R. and Pfeffer, J. An examination of need satisfaction models of job attitudes

  12. Degenerate RFID Channel Modeling for Positioning Applications

    Directory of Open Access Journals (Sweden)

    A. Povalac

    2012-12-01

    Full Text Available This paper introduces the theory of channel modeling for positioning applications in UHF RFID. It explains basic parameters for channel characterization from both the narrowband and wideband point of view. More details are given about ranging and direction finding. Finally, several positioning scenarios are analyzed with developed channel models. All the described models use a degenerate channel, i.e. combined signal propagation from the transmitter to the tag and from the tag to the receiver.

  13. Mouse models of estrogen receptor-positive breast cancer

    Directory of Open Access Journals (Sweden)

    Shakur Mohibi

    2011-01-01

    Full Text Available Breast cancer is the most frequent malignancy and second leading cause of cancer-related deaths among women. Despite advances in genetic and biochemical analyses, the incidence of breast cancer and its associated mortality remain very high. About 60 - 70% of breast cancers are Estrogen Receptor alpha (ER-α positive and are dependent on estrogen for growth. Selective estrogen receptor modulators (SERMs have therefore provided an effective targeted therapy to treat ER-α positive breast cancer patients. Unfortunately, development of resistance to endocrine therapy is frequent and leads to cancer recurrence. Our understanding of molecular mechanisms involved in the development of ER-α positive tumors and their resistance to ER antagonists is currently limited due to lack of experimental models of ER-α positive breast cancer. In most mouse models of breast cancer, the tumors that form are typically ER-negative and independent of estrogen for their growth. However, in recent years more attention has been given to develop mouse models that develop different subtypes of breast cancers, including ER-positive tumors. In this review, we discuss the currently available mouse models that develop ER-α positive mammary tumors and their potential use to elucidate the molecular mechanisms of ER-α positive breast cancer development and endocrine resistance.

  14. Tasks and communication as an avenue to enhance parenting of children birth-5 years: an integrative review.

    Science.gov (United States)

    Mooney-Doyle, Kim; Deatrick, Janet A; Horowitz, June Andrews

    2015-01-01

    Every day, normative functions of parenting and their significance are under-investigated. An integrative review of tasks and communication involved in parenting young children informed by Horowitz (1995) and Blumer (1969) was conducted.Research articles consistent with inclusion criteria were published from 1995 to 2013 and focused on parenting tasks and communication. Themes consistent with Horowitz and Blumer were identified. Nurses are reminded about the significance of attending to the everyday, normative work of parenting young children, the potential meaning derived from this work, and the importance of assessing parental development as well as the importance of continuing research in this area. Copyright © 2015 Elsevier Inc. All rights reserved.

  15. Positioning graphical objects on computer screens: a three-phase model.

    Science.gov (United States)

    Pastel, Robert

    2011-02-01

    This experiment identifies and models phases during the positioning of graphical objects (called cursors in this article) on computer displays. The human computer-interaction community has traditionally used Fitts' law to model selection in graphical user interfaces, whereas human factors experiments have found the single-component Fitts' law inadequate to model positioning of real objects. Participants (N=145) repeatedly positioned variably sized square cursors within variably sized rectangular targets using computer mice. The times for the cursor to just touch the target, for the cursor to enter the target, and for participants to indicate positioning completion were observed. The positioning tolerances were varied from very precise and difficult to imprecise and easy. The time for the cursor to touch the target was proportional to the initial cursor-target distance. The time for the cursor to completely enter the target after touching was proportional to the logarithms of cursor size divided by target tolerances. The time for participants to indicate positioning after entering was inversely proportional to the tolerance. A three-phase model defined by regions--distant, proximate, and inside the target--was proposed and could model the positioning tasks. The three-phase model provides a framework for ergonomists to evaluate new positioning techniques and can explain their deficiencies. The model provides a means to analyze tasks and enhance interaction during positioning.

  16. Fourier-positivity constraints on QCD dipole models

    Directory of Open Access Journals (Sweden)

    Bertrand G. Giraud

    2016-09-01

    Full Text Available Fourier-positivity (F-positivity, i.e. the mathematical property that a function has a positive Fourier transform, can be used as a constraint on the parametrization of QCD dipole-target cross-sections or Wilson line correlators in transverse position space r. They are Bessel transforms of positive transverse momentum dependent gluon distributions. Using mathematical F-positivity constraints on the limit r→0 behavior of the dipole amplitudes, we identify the common origin of the violation of F-positivity for various, however phenomenologically convenient, dipole models. It is due to the behavior r2+ϵ, ϵ>0 softer, even slightly, than color transparency. F-positivity seems thus to conflict with the present dipole formalism when it includes a QCD running coupling constant α(r.

  17. Positioning performance of the NTCM model driven by GPS Klobuchar model parameters

    Science.gov (United States)

    Hoque, Mohammed Mainul; Jakowski, Norbert; Berdermann, Jens

    2018-03-01

    Users of the Global Positioning System (GPS) utilize the Ionospheric Correction Algorithm (ICA) also known as Klobuchar model for correcting ionospheric signal delay or range error. Recently, we developed an ionosphere correction algorithm called NTCM-Klobpar model for single frequency GNSS applications. The model is driven by a parameter computed from GPS Klobuchar model and consecutively can be used instead of the GPS Klobuchar model for ionospheric corrections. In the presented work we compare the positioning solutions obtained using NTCM-Klobpar with those using the Klobuchar model. Our investigation using worldwide ground GPS data from a quiet and a perturbed ionospheric and geomagnetic activity period of 17 days each shows that the 24-hour prediction performance of the NTCM-Klobpar is better than the GPS Klobuchar model in global average. The root mean squared deviation of the 3D position errors are found to be about 0.24 and 0.45 m less for the NTCM-Klobpar compared to the GPS Klobuchar model during quiet and perturbed condition, respectively. The presented algorithm has the potential to continuously improve the accuracy of GPS single frequency mass market devices with only little software modification.

  18. Improved spring model-based collaborative indoor visible light positioning

    Science.gov (United States)

    Luo, Zhijie; Zhang, WeiNan; Zhou, GuoFu

    2016-06-01

    Gaining accuracy with indoor positioning of individuals is important as many location-based services rely on the user's current position to provide them with useful services. Many researchers have studied indoor positioning techniques based on WiFi and Bluetooth. However, they have disadvantages such as low accuracy or high cost. In this paper, we propose an indoor positioning system in which visible light radiated from light-emitting diodes is used to locate the position of receivers. Compared with existing methods using light-emitting diode light, we present a high-precision and simple implementation collaborative indoor visible light positioning system based on an improved spring model. We first estimate coordinate position information using the visible light positioning system, and then use the spring model to correct positioning errors. The system can be employed easily because it does not require additional sensors and the occlusion problem of visible light would be alleviated. We also describe simulation experiments, which confirm the feasibility of our proposed method.

  19. Modeling And Position Control Of Scara Type 3D Printer

    Directory of Open Access Journals (Sweden)

    Ahmet Saygamp305n Ogulmuamp351

    2015-08-01

    Full Text Available In this work a scara robot type 3D printer system is dynamically modeled and position control of the system is realized. For this aim computer aided design model of three degrees of freedom robotic system is created using SolidWorks program then obtained model is exported to MATLABSimMechanics software for position control. Also mathematical model of servo motors used in robotic 3D printer system is included in control methodology to design proportional controllers. Uncontrolled and controlled position results are simulated and given in the form of the graphics.

  20. Mitigating Errors in External Respiratory Surrogate-Based Models of Tumor Position

    International Nuclear Information System (INIS)

    Malinowski, Kathleen T.; McAvoy, Thomas J.; George, Rohini; Dieterich, Sonja; D'Souza, Warren D.

    2012-01-01

    Purpose: To investigate the effect of tumor site, measurement precision, tumor–surrogate correlation, training data selection, model design, and interpatient and interfraction variations on the accuracy of external marker-based models of tumor position. Methods and Materials: Cyberknife Synchrony system log files comprising synchronously acquired positions of external markers and the tumor from 167 treatment fractions were analyzed. The accuracy of Synchrony, ordinary-least-squares regression, and partial-least-squares regression models for predicting the tumor position from the external markers was evaluated. The quantity and timing of the data used to build the predictive model were varied. The effects of tumor–surrogate correlation and the precision in both the tumor and the external surrogate position measurements were explored by adding noise to the data. Results: The tumor position prediction errors increased during the duration of a fraction. Increasing the training data quantities did not always lead to more accurate models. Adding uncorrelated noise to the external marker-based inputs degraded the tumor–surrogate correlation models by 16% for partial-least-squares and 57% for ordinary-least-squares. External marker and tumor position measurement errors led to tumor position prediction changes 0.3–3.6 times the magnitude of the measurement errors, varying widely with model algorithm. The tumor position prediction errors were significantly associated with the patient index but not with the fraction index or tumor site. Partial-least-squares was as accurate as Synchrony and more accurate than ordinary-least-squares. Conclusions: The accuracy of surrogate-based inferential models of tumor position was affected by all the investigated factors, except for the tumor site and fraction index.

  1. Mitigating Errors in External Respiratory Surrogate-Based Models of Tumor Position

    Energy Technology Data Exchange (ETDEWEB)

    Malinowski, Kathleen T. [Department of Radiation Oncology, University of Maryland School of Medicine, Baltimore, MD (United States); Fischell Department of Bioengineering, University of Maryland, College Park, MD (United States); McAvoy, Thomas J. [Fischell Department of Bioengineering, University of Maryland, College Park, MD (United States); Department of Chemical and Biomolecular Engineering and Institute of Systems Research, University of Maryland, College Park, MD (United States); George, Rohini [Department of Radiation Oncology, University of Maryland School of Medicine, Baltimore, MD (United States); Dieterich, Sonja [Department of Radiation Oncology, Stanford University School of Medicine, Stanford, CA (United States); D' Souza, Warren D., E-mail: wdsou001@umaryland.edu [Department of Radiation Oncology, University of Maryland School of Medicine, Baltimore, MD (United States); Fischell Department of Bioengineering, University of Maryland, College Park, MD (United States)

    2012-04-01

    Purpose: To investigate the effect of tumor site, measurement precision, tumor-surrogate correlation, training data selection, model design, and interpatient and interfraction variations on the accuracy of external marker-based models of tumor position. Methods and Materials: Cyberknife Synchrony system log files comprising synchronously acquired positions of external markers and the tumor from 167 treatment fractions were analyzed. The accuracy of Synchrony, ordinary-least-squares regression, and partial-least-squares regression models for predicting the tumor position from the external markers was evaluated. The quantity and timing of the data used to build the predictive model were varied. The effects of tumor-surrogate correlation and the precision in both the tumor and the external surrogate position measurements were explored by adding noise to the data. Results: The tumor position prediction errors increased during the duration of a fraction. Increasing the training data quantities did not always lead to more accurate models. Adding uncorrelated noise to the external marker-based inputs degraded the tumor-surrogate correlation models by 16% for partial-least-squares and 57% for ordinary-least-squares. External marker and tumor position measurement errors led to tumor position prediction changes 0.3-3.6 times the magnitude of the measurement errors, varying widely with model algorithm. The tumor position prediction errors were significantly associated with the patient index but not with the fraction index or tumor site. Partial-least-squares was as accurate as Synchrony and more accurate than ordinary-least-squares. Conclusions: The accuracy of surrogate-based inferential models of tumor position was affected by all the investigated factors, except for the tumor site and fraction index.

  2. GNSS Positioning Performance Analysis Using PSO-RBF Estimation Model

    Directory of Open Access Journals (Sweden)

    Jgouta Meriem

    2017-06-01

    Full Text Available Positioning solutions need to be more precise and available. The most frequent method used nowadays includes a GPS receiver, sometimes supported by other sensors. Generally, GPS and GNSS suffer from spreading perturbations that produce biases on pseudo-range measurements. With a view to optimize the use of the satellites received, we offer a positioning algorithm with pseudo range error modelling with the contribution of an appropriate filtering process. Extended Kalman Filter, The Rao- Blackwellized filter are among the most widely used algorithms to predict errors and to filter the high frequency noise. This paper describes a new method of estimating the pseudo-range errors based on the PSO-RBF model which achieves an optimal training criterion. This model is appropriate of its method to predict the GPS corrections for accurate positioning, it reduce the positioning errors at high velocities by more than 50% compared to the RLS or EKF methods.

  3. A Context-Aware Model to Provide Positioning in Disaster Relief Scenarios

    Directory of Open Access Journals (Sweden)

    Daniel Moreno

    2015-09-01

    Full Text Available The effectiveness of the work performed during disaster relief efforts is highly dependent on the coordination of activities conducted by the first responders deployed in the affected area. Such coordination, in turn, depends on an appropriate management of geo-referenced information. Therefore, enabling first responders to count on positioning capabilities during these activities is vital to increase the effectiveness of the response process. The positioning methods used in this scenario must assume a lack of infrastructure-based communication and electrical energy, which usually characterizes affected areas. Although positioning systems such as the Global Positioning System (GPS have been shown to be useful, we cannot assume that all devices deployed in the area (or most of them will have positioning capabilities by themselves. Typically, many first responders carry devices that are not capable of performing positioning on their own, but that require such a service. In order to help increase the positioning capability of first responders in disaster-affected areas, this paper presents a context-aware positioning model that allows mobile devices to estimate their position based on information gathered from their surroundings. The performance of the proposed model was evaluated using simulations, and the obtained results show that mobile devices without positioning capabilities were able to use the model to estimate their position. Moreover, the accuracy of the positioning model has been shown to be suitable for conducting most first response activities.

  4. Modeling and Positioning of a PZT Precision Drive System

    Directory of Open Access Journals (Sweden)

    Che Liu

    2017-11-01

    Full Text Available The fact that piezoelectric ceramic transducer (PZT precision drive systems in 3D printing are faced with nonlinear problems with respect to positioning, such as hysteresis and creep, has had an extremely negative impact on the precision of laser focusing systems. To eliminate the impact of PZT nonlinearity during precision drive movement, mathematical modeling and theoretical analyses of each module comprising the system were carried out in this study, a micro-displacement measurement circuit based on Position Sensitive Detector (PSD is constructed, followed by the establishment of system closed-loop control and creep control models. An XL-80 laser interferometer (Renishaw, Wotton-under-Edge, UK was used to measure the performance of the precision drive system, showing that system modeling and control algorithms were correct, with the requirements for precision positioning of the drive system satisfied.

  5. Modeling and Positioning of a PZT Precision Drive System.

    Science.gov (United States)

    Liu, Che; Guo, Yanling

    2017-11-08

    The fact that piezoelectric ceramic transducer (PZT) precision drive systems in 3D printing are faced with nonlinear problems with respect to positioning, such as hysteresis and creep, has had an extremely negative impact on the precision of laser focusing systems. To eliminate the impact of PZT nonlinearity during precision drive movement, mathematical modeling and theoretical analyses of each module comprising the system were carried out in this study, a micro-displacement measurement circuit based on Position Sensitive Detector (PSD) is constructed, followed by the establishment of system closed-loop control and creep control models. An XL-80 laser interferometer (Renishaw, Wotton-under-Edge, UK) was used to measure the performance of the precision drive system, showing that system modeling and control algorithms were correct, with the requirements for precision positioning of the drive system satisfied.

  6. Current models of positive mental health

    Directory of Open Access Journals (Sweden)

    Stanojević Dragana Z.

    2012-01-01

    Full Text Available The concept of positive mental health represents not merely the absence of mental disease but presence of high level of happiness and well-being. In this paper we mentioned shortly the earliest concept of mental health, presented by Marie Jahoda in the mid-twentieth century. After that, we described two traditions in understanding and researching of subjective well-being: hedonic and eudaimonic approach. First approach focuses on investigation of positive affects and happiness as emotional and life satisfaction as cognitive component of subjective well-being. Second tradition emphasizes potentials and competences that person develops to the highest level, in personal and social area. Both psychological and social well-being are core concept of positive mental health psychology, designated together as positive functioning. The psychological well-being comprises six dimensions: self-acceptance, positive relations with others, environmental mastery, autonomy, purpose of life and personal growth. Social well-being consists of five dimensions: social integration, social acceptance, social contribution, social actualization and social coherence. By integrating hedonic and eudaimonic well-being as well as absence of mental disease, Corey Keyes introduced concept of complete mental health. People with complete mental health have reported absence of disease during past year and presence of high level of emotional, psychological and social well-being (flourishing. People with incomplete mental health have also reported absence of mental disease but low level of positive functioning (languishing. Keyes thought there are people with complete and incomplete mental illness; both groups report presence of mental disease, but second group has high level of positive functioning. Models of positive mental health are widely used in research studies as well as in programs for prevention and promotion of mental health. .

  7. Employing Tropospheric Numerical Weather Prediction Model for High-Precision GNSS Positioning

    Science.gov (United States)

    Alves, Daniele; Gouveia, Tayna; Abreu, Pedro; Magário, Jackes

    2014-05-01

    In the past few years is increasing the necessity of realizing high accuracy positioning. In this sense, the spatial technologies have being widely used. The GNSS (Global Navigation Satellite System) has revolutionized the geodetic positioning activities. Among the existent methods one can emphasize the Precise Point Positioning (PPP) and network-based positioning. But, to get high accuracy employing these methods, mainly in real time, is indispensable to realize the atmospheric modeling (ionosphere and troposphere) accordingly. Related to troposphere, there are the empirical models (for example Saastamoinen and Hopfield). But when highly accuracy results (error of few centimeters) are desired, maybe these models are not appropriated to the Brazilian reality. In order to minimize this limitation arises the NWP (Numerical Weather Prediction) models. In Brazil the CPTEC/INPE (Center for Weather Prediction and Climate Studies / Brazilian Institute for Spatial Researches) provides a regional NWP model, currently used to produce Zenithal Tropospheric Delay (ZTD) predictions (http://satelite.cptec.inpe.br/zenital/). The actual version, called eta15km model, has a spatial resolution of 15 km and temporal resolution of 3 hours. In this paper the main goal is to accomplish experiments and analysis concerning the use of troposphere NWP model (eta15km model) in PPP and network-based positioning. Concerning PPP it was used data from dozens of stations over the Brazilian territory, including Amazon forest. The results obtained with NWP model were compared with Hopfield one. NWP model presented the best results in all experiments. Related to network-based positioning it was used data from GNSS/SP Network in São Paulo State, Brazil. This network presents the best configuration in the country to realize this kind of positioning. Actually the network is composed by twenty stations (http://www.fct.unesp.br/#!/pesquisa/grupos-de-estudo-e-pesquisa/gege//gnss-sp-network2789/). The

  8. The positive group affect spiral : a dynamic model of the emergence of positive affective similarity in work groups

    NARCIS (Netherlands)

    Walter, F.; Bruch, H.

    This conceptual paper seeks to clarify the process of the emergence of positive collective affect. Specifically, it develops a dynamic model of the emergence of positive affective similarity in work groups. It is suggested that positive group affective similarity and within-group relationship

  9. Bayesian Estimation of the Logistic Positive Exponent IRT Model

    Science.gov (United States)

    Bolfarine, Heleno; Bazan, Jorge Luis

    2010-01-01

    A Bayesian inference approach using Markov Chain Monte Carlo (MCMC) is developed for the logistic positive exponent (LPE) model proposed by Samejima and for a new skewed Logistic Item Response Theory (IRT) model, named Reflection LPE model. Both models lead to asymmetric item characteristic curves (ICC) and can be appropriate because a symmetric…

  10. Application of TaiWan Ionosphere Model to Single-Frequency Ionospheric Delay Correction for GPS Static Position Positioning

    Science.gov (United States)

    Macalalad, E. P.; Tsai, L.; Wu, J.

    2011-12-01

    Ionospheric delay is one of the major sources of error in GPS positioning and navigation. This error in both pseudorange and phase ranges can vary depending on the location of observation, local time, season, solar cycle and geomagnetic activity. This effect can be practically removed using dual-frequency receivers. However, these types of receivers are very expensive and thus, impractical for most users. Therefore, for single-frequency receivers, ionosphere is usually modeled to attempt to remove this effect analytically. Numerous ionosphere models have been introduced in the past. Some of which are the Klobuchar (or broadcast) model and the global ionosphere map (GIM) provided by the International GNSS Service (IGS). In this paper, another model, called the TaiWan Ionosphere Model (TWIM) was used to correct this effect. TWIM is a three dimensional ionospheric electron (ne) density model derived from FormoSat3/COSMIC GPS Radio Occultation measurements, was used to calculate ionospheric delay for GPS single-frequency positioning. The ne profiles were used to calculate the slant TEC (STEC) between a receiver and each GPS satellite and correct the pseudorange single-frequency observations. The corrected pseudorange for every epoch was used to calculate the position of the receiver. Observations were made in a low-latitude location near one of the peaks of the equatorial anomaly. It was shown that TEC maps generated using TWIM exhibited detailed structure of the ionosphere, whereas Klobuchar and GIM only provided the basic diurnal and geographic features of the ionosphere. Also, it was shown that for static point positioning TWIM provides more accurate and more precise positioning than the Klobuchar and GIM models. That is, on the average, the horizontal accuracy, represented by the circular error probable (CEP), distance RMS (DRMS) and twice the DRMS (2DRMS), were better by 15-18% as compared with the CEP, DRMS and 2DRMS of uncorrected, Klobuchar and GIM. Moreover

  11. Experimental Exploration of RSSI Model for the Vehicle Intelligent Position System

    Directory of Open Access Journals (Sweden)

    Zhichao Cao

    2015-01-01

    Full Text Available Vehicle intelligent position systems based on Received Signal Strength Indicator (RSSI in Wireless Sensor Networks (WSNs are efficiently utilized. The vehicle’s position accuracy is of great importance for transportation behaviors, such as dynamic vehicle routing problems and multiple pedestrian routing choice behaviors and so on. Therefore, a precise position and available optimization is necessary for total parameters of conventional RSSI model. In this papar, we investigate the experimental performance of translating the power measurements to corresponding distance between each pair of nodes. The priori knowledge about the environment interference could impact the accuracy of vehicles’s position and the reliability of paremeters greatly. Based on the real-world outdoor experiments, we compares different regression analysis of the RSSI model, in order to establish a calibration scheme on RSSI model. We showed that the average error of RSSI model is able to decrease throughout the rules of environmental factor n and shadowing factor ? respectively. Moreover, the calculation complexity is reduced. Since variation tendency of environmental factor n, shadowing factor ? with distance and signal strength could be simulated respectively, RSSI model fulfills the precision of the vehicle intelligent position system.

  12. Position-specific isotope modeling of organic micropollutants transformation through different reaction pathways

    International Nuclear Information System (INIS)

    Jin, Biao; Rolle, Massimo

    2016-01-01

    The degradation of organic micropollutants occurs via different reaction pathways. Compound specific isotope analysis is a valuable tool to identify such degradation pathways in different environmental systems. We propose a mechanism-based modeling approach that provides a quantitative framework to simultaneously evaluate concentration as well as bulk and position-specific multi-element isotope evolution during the transformation of organic micropollutants. The model explicitly simulates position-specific isotopologues for those atoms that experience isotope effects and, thereby, provides a mechanistic description of isotope fractionation occurring at different molecular positions. To demonstrate specific features of the modeling approach, we simulated the degradation of three selected organic micropollutants: dichlorobenzamide (BAM), isoproturon (IPU) and diclofenac (DCF). The model accurately reproduces the multi-element isotope data observed in previous experimental studies. Furthermore, it precisely captures the dual element isotope trends characteristic of different reaction pathways as well as their range of variation consistent with observed bulk isotope fractionation. It was also possible to directly validate the model capability to predict the evolution of position-specific isotope ratios with available experimental data. Therefore, the approach is useful both for a mechanism-based evaluation of experimental results and as a tool to explore transformation pathways in scenarios for which position-specific isotope data are not yet available. - Highlights: • Mechanism-based, position-specific isotope modeling of micropollutants degradation. • Simultaneous description of concentration and primary and secondary isotope effects. • Key features of the model are demonstrated with three illustrative examples. • Model as a tool to explore reaction mechanisms and to design experiments. - We propose a modeling approach incorporating mechanistic information and

  13. Positive Orientation and the Five-Factor Model

    Directory of Open Access Journals (Sweden)

    Miciuk Łukasz Roland

    2016-04-01

    Full Text Available The aim of the present study was to investigate the relationship between positive orientation (PO defined as a basic predisposition to perceive and evaluate positive aspects of life, the future and oneself and the Five-Factor Model of personality (FFM. Hypotheses postulated positive correlations between PO and extraversion, conscientiousness, agreeableness and openness; a negative correlation was predicted between PO and neuroticism. Two hundred Polish students completed the following measures: SES (Self-Esteem Scale, Rosenberg, SWLS (The Satisfaction with Life Scale; Diener, Emmons, Larson & Griffin, LOT-R (The Life Orientation Test - Revised; Scheier, Carver & Bridges and NEOFFI (NEO Five Factor Inventory, Costa & McCrae. The results confirmed correlations between PO and extraversion, conscientiousness, and neuroticism; correlations with openness and agreeableness were not supported. According to canonical correlations, PO shows a clear affinity to the FFM.

  14. A Model for Positively Correlated Count Variables

    DEFF Research Database (Denmark)

    Møller, Jesper; Rubak, Ege Holger

    2010-01-01

    An α-permanental random field is briefly speaking a model for a collection of non-negative integer valued random variables with positive associations. Though such models possess many appealing probabilistic properties, many statisticians seem unaware of α-permanental random fields...... and their potential applications. The purpose of this paper is to summarize useful probabilistic results, study stochastic constructions and simulation techniques, and discuss some examples of α-permanental random fields. This should provide a useful basis for discussing the statistical aspects in future work....

  15. A multiple relevance feedback strategy with positive and negative models.

    Directory of Open Access Journals (Sweden)

    Yunlong Ma

    Full Text Available A commonly used strategy to improve search accuracy is through feedback techniques. Most existing work on feedback relies on positive information, and has been extensively studied in information retrieval. However, when a query topic is difficult and the results from the first-pass retrieval are very poor, it is impossible to extract enough useful terms from a few positive documents. Therefore, the positive feedback strategy is incapable to improve retrieval in this situation. Contrarily, there is a relatively large number of negative documents in the top of the result list, and it has been confirmed that negative feedback strategy is an important and useful way for adapting this scenario by several recent studies. In this paper, we consider a scenario when the search results are so poor that there are at most three relevant documents in the top twenty documents. Then, we conduct a novel study of multiple strategies for relevance feedback using both positive and negative examples from the first-pass retrieval to improve retrieval accuracy for such difficult queries. Experimental results on these TREC collections show that the proposed language model based multiple model feedback method which is generally more effective than both the baseline method and the methods using only positive or negative model.

  16. The Interactionist Imagination

    DEFF Research Database (Denmark)

    to the works of: Georg Simmel, Robert E. Park, George Herbert Mead, Everett C. Hughes, Herbert Blumer, Manford H. Kuhn, Erving Goffman, Harold Garfinkel, Anselm L. Strauss, Jack D. Douglas, Howard S. Becker, Stanford M. Lyman, Arlie R. Hochschild and Gary Alan Fine....

  17. Modelling and control of neutron and synchrotron beamline positioning systems

    Energy Technology Data Exchange (ETDEWEB)

    Nneji, S.O., E-mail: Stephen.nneji@open.ac.uk [The Open University, Materials Engineering, Walton Hall, Milton Keynes, Buckinghamshire MK7 6AA (United Kingdom); Science and Technology Facility Council , Rutherford Appleton Laboratory, Harwell Science and Innovation Campus, Didcot, OX110QX Oxfordshire (United Kingdom); Zhang, S.Y.; Kabra, S. [Science and Technology Facility Council , Rutherford Appleton Laboratory, Harwell Science and Innovation Campus, Didcot, OX110QX Oxfordshire (United Kingdom); Moat, R.J.; James, J.A. [The Open University, Materials Engineering, Walton Hall, Milton Keynes, Buckinghamshire MK7 6AA (United Kingdom)

    2016-03-21

    Measurement of residual stress using neutron or synchrotron diffraction relies on the accurate alignment of the sample in relation to the gauge volume of the instrument. Automatic sample alignment can be achieved using kinematic models of the positioning system provided the relevant kinematic parameters are known, or can be determined, to a suitable accuracy. In this paper, the use of techniques from robotic calibration theory to generate kinematic models of both off-the-shelf and custom-built positioning systems is demonstrated. The approach is illustrated using a positioning system in use on the ENGIN-X instrument at the UK's ISIS pulsed neutron source comprising a traditional XYZΩ table augmented with a triple axis manipulator. Accuracies better than 100 microns were achieved for this compound system. Discussed here in terms of sample positioning systems these methods are entirely applicable to other moving instrument components such as beam shaping jaws and detectors.

  18. Interpreting Definitions of Public Relations: Self Assessment and a Symbolic Interactionism-Based Alternative.

    Science.gov (United States)

    Gordon, Joye C.

    1997-01-01

    Reviews several popular definitions of public relations; explicates the shared elements and assumptions inherent in these definitions. Presents an alternative conceptualization of public relations based upon Herbert Blumer's symbolic interactionism. Looks to stimulate questioning and self assessment and to introduce alternative goals, ideas, and…

  19. A simulation to model position encoding multicrystal PET detectors

    Energy Technology Data Exchange (ETDEWEB)

    Tsang, G; Moisan, C; Rogers, J G

    1995-05-01

    We have developed a simulation to model position encoding multicrystal detectors for positron emission tomography. The simulation is designed to treat the interactions of energetic photons in a scintillator, the geometry of the multicrystal array, as well as the propagation and detection of individual scintillation photons. The simulation is tested with a model of the EXACT HR PLUS block detector manufactured by Siemens-CTI. Position and energy responses derived from the simulation are compared to measured ones. Line-spread-functions, for four columns of crystals, are reproduced with an accuracy of {+-}0.5 mm. The crystal-by-crystal photopeak pulse heights and FWHMs are also predicted within a range of {+-}14%, and {sub -6}{sup +9}% respectively. (author). 21 refs., 2 tabs., 7 figs.

  20. AC impedance electrochemical modeling of lithium-ion positive electrodes

    International Nuclear Information System (INIS)

    Dees, D.; Gunen, E.; Abraham, D.; Jansen, A.; Prakash, J.

    2004-01-01

    Under Department of Energy's Advanced Technology Development Program,various analytical diagnostic studies are being carried out to examine the lithium-ion battery technology for hybrid electric vehicle applications, and a series of electrochemical studies are being conducted to examine the performance of these batteries. An electrochemical model was developed to associate changes that were observed in the post-test analytical diagnostic studies with the electrochemical performance loss during testing of lithium ion batteries. While both electrodes in the lithium-ion cell have been studied using a similar electrochemical model, the discussion here is limited to modeling of the positive electrode. The positive electrode under study has a composite structure made of a layered nickel oxide (LiNi 0.8 Co 0.15 Al 0.05 O 2 ) active material, a carbon black and graphite additive for distributing current, and a PVDF binder all on an aluminum current collector. The electrolyte is 1.2M LiPF 6 dissolved in a mixture of EC and EMC and a Celgard micro-porous membrane is used as the separator. Planar test cells (positive/separator/negative) were constructed with a special fixture and two separator membranes that allowed the placement of a micro-reference electrode between the separator membranes (1). Electrochemical studies including AC impedance spectroscopy were then conducted on the individual electrodes to examine the performance and ageing effects in the cell. The model was developed by following the work of Professor Newman at Berkeley (2). The solid electrolyte interface (SEI) region, based on post-test analytical results, was assumed to be a film on the oxide and an oxide layer at the surface of the oxide. A double layer capacity was added in parallel with the Butler-Volmer kinetic expression. The pertinent reaction, thermodynamic, and transport equations were linearized for a small sinusoidal perturbation (3). The resulting system of differential equations was solved

  1. Theory of positive disintegration as a model of adolescent development.

    Science.gov (United States)

    Laycraft, Krystyna

    2011-01-01

    This article introduces a conceptual model of the adolescent development based on the theory of positive disintegration combined with theory of self-organization. Dabrowski's theory of positive disintegration, which was created almost a half century ago, still attracts psychologists' and educators' attention, and is extensively applied into studies of gifted and talented people. The positive disintegration is the mental development described by the process of transition from lower to higher levels of mental life and stimulated by tension, inner conflict, and anxiety. This process can be modeled by a sequence of patterns of organization (attractors) as a developmental potential (a control parameter) changes. Three levels of disintegration (unilevel disintegration, spontaneous multilevel disintegration, and organized multilevel disintegration) are analyzed in detail and it is proposed that they represent behaviour of early, middle and late periods of adolescence. In the discussion, recent research on the adolescent brain development is included.

  2. Improved SAFARI-1 research reactor irradiation position modeling in OSCAR-3 code system

    International Nuclear Information System (INIS)

    Moloko, L. E.; Belal, M. G. A. H.

    2009-01-01

    The demand on the availability of irradiation positions in the SAFARI-1 reactor is continuously increasing due to the commercial pressure to produce isotopes more efficiently. This calls for calculational techniques and modeling methods to be improved regularly to optimize irradiation services. The irradiation position models are improved using the OSCAR-3 code system, and results are compared to experimental measurements. It is concluded that the irradiation position models are essential if realistic core follow and reload studies are to be performed and most importantly, for the realization of improved agreement between experimental data and calculated results. (authors)

  3. “Would you like coffee?”

    DEFF Research Database (Denmark)

    Wegener, Charlotte

    The purpose of this paper is to demonstrate how the notions of insiderness and oursiderness serve as a sensitizing concept (Blumer 1954) in the analysis of cross-organisational learning. The paper is based on an ethnographic field study on learning and innovation in the social and health care edu...

  4. Yoga and positive body image: A test of the Embodiment Model.

    Science.gov (United States)

    Mahlo, Leeann; Tiggemann, Marika

    2016-09-01

    The study aimed to test the Embodiment Model of Positive Body Image (Menzel & Levine, 2011) within the context of yoga. Participants were 193 yoga practitioners (124 Iyengar, 69 Bikram) and 127 university students (non-yoga participants) from Adelaide, South Australia. Participants completed questionnaire measures of positive body image, embodiment, self-objectification, and desire for thinness. Results showed yoga practitioners scored higher on positive body image and embodiment, and lower on self-objectification than non-yoga participants. In support of the embodiment model, the relationship between yoga participation and positive body image was serially mediated by embodiment and reduced self-objectification. Although Bikram practitioners endorsed appearance-related reasons for participating in yoga more than Iyengar practitioners, there were no significant differences between Iyengar and Bikram yoga practitioners on body image variables. It was concluded that yoga is an embodying activity that can provide women with the opportunity to cultivate a favourable relationship with their body. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Enhanced Map-Matching Algorithm with a Hidden Markov Model for Mobile Phone Positioning

    Directory of Open Access Journals (Sweden)

    An Luo

    2017-10-01

    Full Text Available Numerous map-matching techniques have been developed to improve positioning, using Global Positioning System (GPS data and other sensors. However, most existing map-matching algorithms process GPS data with high sampling rates, to achieve a higher correct rate and strong universality. This paper introduces a novel map-matching algorithm based on a hidden Markov model (HMM for GPS positioning and mobile phone positioning with a low sampling rate. The HMM is a statistical model well known for providing solutions to temporal recognition applications such as text and speech recognition. In this work, the hidden Markov chain model was built to establish a map-matching process, using the geometric data, the topologies matrix of road links in road network and refined quad-tree data structure. HMM-based map-matching exploits the Viterbi algorithm to find the optimized road link sequence. The sequence consists of hidden states in the HMM model. The HMM-based map-matching algorithm is validated on a vehicle trajectory using GPS and mobile phone data. The results show a significant improvement in mobile phone positioning and high and low sampling of GPS data.

  6. Promoting success or preventing failure: cultural differences in motivation by positive and negative role models.

    Science.gov (United States)

    Lockwood, Penelope; Marshall, Tara C; Sadler, Pamela

    2005-03-01

    In two studies, cross-cultural differences in reactions to positive and negative role models were examined. The authors predicted that individuals from collectivistic cultures, who have a stronger prevention orientation, would be most motivated by negative role models, who highlight a strategy of avoiding failure; individuals from individualistic cultures, who have a stronger promotion focus, would be most motivated by positive role models, who highlight a strategy of pursuing success. In Study 1, the authors examined participants' reported preferences for positive and negative role models. Asian Canadian participants reported finding negative models more motivating than did European Canadians; self-construals and regulatory focus mediated cultural differences in reactions to role models. In Study 2, the authors examined the impact of role models on the academic motivation of Asian Canadian and European Canadian participants. Asian Canadians were motivated only by a negative model, and European Canadians were motivated only by a positive model.

  7. Decision Making Perspectives of Young Children (K-5).

    Science.gov (United States)

    Rogers, Linda J.; McDonald, Linda L.

    1999-01-01

    Applies Blumer's theory of symbolic interactionism to explore how normal children make meaning of their decision making world, both of their own acts and the labyrinthine world adults structure for them. Schema/narratives on friendship, sports, adults, and school reveal knowledge making strategies defined by immediate experiences and a capacity to…

  8. Student Activism within Christian College Cultures: A Symbolic Interactionist Perspective

    Science.gov (United States)

    Cole, Brian E.

    2014-01-01

    This study contributes to the understanding of the structural and cultural influences of Christian college environments on student activism through the framework of symbolic interactionism (Blumer, 1969; Mead, 1934). The goal of this research was to examine how the students at Christian institutions understand and engage in activism within their…

  9. Generation model of positional values as cell operation during the development of multicellular organisms.

    Science.gov (United States)

    Ogawa, Ken-ichiro; Miyake, Yoshihiro

    2011-03-01

    Many conventional models have used the positional information hypothesis to explain each elementary process of morphogenesis during the development of multicellular organisms. Their models assume that the steady concentration patterns of morphogens formed in an extracellular environment have an important property of positional information, so-called "robustness". However, recent experiments reported that a steady morphogen pattern, the concentration gradient of the Bicoid protein, during early Drosophila embryonic development is not robust for embryo-to-embryo variability. These reports encourage a reconsideration of a long-standing problem in systematic cell differentiation: what is the entity of positional information for cells? And, what is the origin of the robust boundary of gene expression? To address these problems at a cellular level, in this article we pay attention to the re-generative phenomena that show another important property of positional information, "size invariance". In view of regenerative phenomena, we propose a new mathematical model to describe the generation mechanism of a spatial pattern of positional values. In this model, the positional values are defined as the values into which differentiable cells transform a spatial pattern providing positional information. The model is mathematically described as an associative algebra composed of various terms, each of which is the multiplication of some fundamental operators under the assumption that the operators are derived from the remarkable properties of cell differentiation on an amputation surface in regenerative phenomena. We apply this model to the concentration pattern of the Bicoid protein during the anterior-posterior axis formation in Drosophila, and consider the conditions needed to establish the robust boundary of the expression of the hunchback gene. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

  10. The parametrization of Coulomb barrier heights and positions using the double folding model

    International Nuclear Information System (INIS)

    Qu, W.W.; Zhang, G.L.; Le, X.Y.

    2011-01-01

    The Coulomb barrier heights and positions are systematically shown with mass numbers and charge radii of the interacting nuclei. The nuclear potential is calculated by using the double folding model with the density-dependence nucleon-nucleon interaction (CDM3Y6). The pocket formulas are obtained for the Coulomb barrier heights and positions by analyzing several hundreds of heavy-ion systems with mass numbers from light nuclei to heavy nuclei. The parameterized formulas can reproduce the calculated barrier heights and positions by using the double folding model within the accuracy of ±1%. Moreover, the results are agreeable with the experimental data. The relation between the barrier height and the barrier position is also studied.

  11. Extending positive CLASS results across multiple instructors and multiple classes of Modeling Instruction

    Science.gov (United States)

    Brewe, Eric; Traxler, Adrienne; de la Garza, Jorge; Kramer, Laird H.

    2013-12-01

    We report on a multiyear study of student attitudes measured with the Colorado Learning Attitudes about Science Survey in calculus-based introductory physics taught with the Modeling Instruction curriculum. We find that five of six instructors and eight of nine sections using Modeling Instruction showed significantly improved attitudes from pre- to postcourse. Cohen’s d effect sizes range from 0.08 to 0.95 for individual instructors. The average effect was d=0.45, with a 95% confidence interval of (0.26-0.64). These results build on previously published results showing positive shifts in attitudes from Modeling Instruction classes. We interpret these data in light of other published positive attitudinal shifts and explore mechanistic explanations for similarities and differences with other published positive shifts.

  12. Estimation in the positive stable shared frailty Cox proportional hazards model

    DEFF Research Database (Denmark)

    Martinussen, Torben; Pipper, Christian Bressen

    2005-01-01

    model in situations where the correlated survival data show a decreasing association with time. In this paper, we devise a likelihood based estimation procedure for the positive stable shared frailty Cox model, which is expected to obtain high efficiency. The proposed estimator is provided with large...

  13. Waif goodbye! Average-size female models promote positive body image and appeal to consumers.

    Science.gov (United States)

    Diedrichs, Phillippa C; Lee, Christina

    2011-10-01

    Despite consensus that exposure to media images of thin fashion models is associated with poor body image and disordered eating behaviours, few attempts have been made to enact change in the media. This study sought to investigate an effective alternative to current media imagery, by exploring the advertising effectiveness of average-size female fashion models, and their impact on the body image of both women and men. A sample of 171 women and 120 men were assigned to one of three advertisement conditions: no models, thin models and average-size models. Women and men rated average-size models as equally effective in advertisements as thin and no models. For women with average and high levels of internalisation of cultural beauty ideals, exposure to average-size female models was associated with a significantly more positive body image state in comparison to exposure to thin models and no models. For men reporting high levels of internalisation, exposure to average-size models was also associated with a more positive body image state in comparison to viewing thin models. These findings suggest that average-size female models can promote positive body image and appeal to consumers.

  14. Particle based 3D modeling of positive streamer inception

    NARCIS (Netherlands)

    H.J. Teunissen (Jannis)

    2012-01-01

    htmlabstractIn this report we present a particle based 3D model for the study of streamer inception near positive electrodes in air. The particle code is of the PIC-MCC type and an electrode is included using the charge simulation method. An algorithm for the adaptive creation of super-particles is

  15. Experimental investigation and numerical modelling of positive corona discharge: ozone generation

    Energy Technology Data Exchange (ETDEWEB)

    Yanallah, K; Castellanos, A [Departamento de Electronica y Electromagnetismo, Universidad de Sevilla (Spain); Pontiga, F; Fernandez-Rueda, A [Departamento de FIsica Aplicada II, Universidad de Sevilla (Spain)

    2009-03-21

    The spatial distribution of the species generated in a wire-cylinder positive corona discharge in pure oxygen has been computed using a plasma chemistry model that includes the most significant reactions between electrons, ions, atoms and molecules. The plasma chemistry model is included in the continuity equations of each species, which are coupled with Poisson's equation for the electric field and the energy conservation equation for the gas temperature. The current-voltage characteristic measured in the experiments has been used as an input data to the numerical simulation. The numerical model is able to reproduce the basic structure of the positive corona discharge and highlights the importance of Joule heating on ozone generation. The average ozone density has been computed as a function of current intensity and compared with the experimental measurements of ozone concentration determined by UV absorption spectroscopy.

  16. Experimental investigation and numerical modelling of positive corona discharge: ozone generation

    International Nuclear Information System (INIS)

    Yanallah, K; Castellanos, A; Pontiga, F; Fernandez-Rueda, A

    2009-01-01

    The spatial distribution of the species generated in a wire-cylinder positive corona discharge in pure oxygen has been computed using a plasma chemistry model that includes the most significant reactions between electrons, ions, atoms and molecules. The plasma chemistry model is included in the continuity equations of each species, which are coupled with Poisson's equation for the electric field and the energy conservation equation for the gas temperature. The current-voltage characteristic measured in the experiments has been used as an input data to the numerical simulation. The numerical model is able to reproduce the basic structure of the positive corona discharge and highlights the importance of Joule heating on ozone generation. The average ozone density has been computed as a function of current intensity and compared with the experimental measurements of ozone concentration determined by UV absorption spectroscopy.

  17. Experimental investigation and numerical modelling of positive corona discharge: ozone generation

    Science.gov (United States)

    Yanallah, K; Pontiga, F; Fernández-Rueda, A; Castellanos, A

    2009-03-01

    The spatial distribution of the species generated in a wire-cylinder positive corona discharge in pure oxygen has been computed using a plasma chemistry model that includes the most significant reactions between electrons, ions, atoms and molecules. The plasma chemistry model is included in the continuity equations of each species, which are coupled with Poisson's equation for the electric field and the energy conservation equation for the gas temperature. The current-voltage characteristic measured in the experiments has been used as an input data to the numerical simulation. The numerical model is able to reproduce the basic structure of the positive corona discharge and highlights the importance of Joule heating on ozone generation. The average ozone density has been computed as a function of current intensity and compared with the experimental measurements of ozone concentration determined by UV absorption spectroscopy.

  18. Near-real-time regional troposphere models for the GNSS precise point positioning technique

    International Nuclear Information System (INIS)

    Hadas, T; Kaplon, J; Bosy, J; Sierny, J; Wilgan, K

    2013-01-01

    The GNSS precise point positioning (PPP) technique requires high quality product (orbits and clocks) application, since their error directly affects the quality of positioning. For real-time purposes it is possible to utilize ultra-rapid precise orbits and clocks which are disseminated through the Internet. In order to eliminate as many unknown parameters as possible, one may introduce external information on zenith troposphere delay (ZTD). It is desirable that the a priori model is accurate and reliable, especially for real-time application. One of the open problems in GNSS positioning is troposphere delay modelling on the basis of ground meteorological observations. Institute of Geodesy and Geoinformatics of Wroclaw University of Environmental and Life Sciences (IGG WUELS) has developed two independent regional troposphere models for the territory of Poland. The first one is estimated in near-real-time regime using GNSS data from a Polish ground-based augmentation system named ASG-EUPOS established by Polish Head Office of Geodesy and Cartography (GUGiK) in 2008. The second one is based on meteorological parameters (temperature, pressure and humidity) gathered from various meteorological networks operating over the area of Poland and surrounding countries. This paper describes the methodology of both model calculation and verification. It also presents results of applying various ZTD models into kinematic PPP in the post-processing mode using Bernese GPS Software. Positioning results were used to assess the quality of the developed models during changing weather conditions. Finally, the impact of model application to simulated real-time PPP on precision, accuracy and convergence time is discussed. (paper)

  19. Incremental validity of positive orientation: predictive efficiency beyond the five-factor model

    Directory of Open Access Journals (Sweden)

    Łukasz Roland Miciuk

    2016-05-01

    Full Text Available Background The relation of positive orientation (a basic predisposition to think positively of oneself, one’s life and one’s future and personality traits is still disputable. The purpose of the described research was to verify the hypothesis that positive orientation has predictive efficiency beyond the five-factor model. Participants and procedure One hundred and thirty participants (at the mean age M = 24.84 completed the following questionnaires: the Self-Esteem Scale (SES, the Satisfaction with Life Scale (SWLS, the Life Orientation Test-Revised (LOT-R, the Positivity Scale (P-SCALE, the NEO Five Factor Inventory (NEO-FFI, the Self-Concept Clarity Scale (SCC, the Generalized Self-Efficacy Scale (GSES and the Life Engagement Test (LET. Results The introduction of positive orientation as an additional predictor in the second step of regression analyses led to better prediction of the following variables: purpose in life, self-concept clarity and generalized self-efficacy. This effect was the strongest for predicting purpose in life (i.e. 14% increment of the explained variance. Conclusions The results confirmed our hypothesis that positive orientation can be characterized by incremental validity – its inclusion in the regression model (in addition to the five main factors of personality increases the amount of explained variance. These findings may provide further evidence for the legitimacy of measuring positive orientation and personality traits separately.

  20. Global Application of TaiWan Ionospheric Model to Single-Frequency GPS Positioning

    Science.gov (United States)

    Macalalad, E.; Tsai, L. C.; Wu, J.

    2012-04-01

    Ionospheric delay is one the major sources of error in GPS positioning and navigation. This error in both pseudorange and phase ranges vary depending on the location of observation, local time, season, solar cycle and geomagnetic activity. For single-frequency receivers, this delay is usually removed using ionospheric models. Two of them are the Klobuchar, or broadcast, model and the global ionosphere map (GIM) provided by the International GNSS Service (IGS). In this paper, a three dimensional ionospheric electron (ne) density model derived from FormoSat3/COSMIC GPS Radio Occultation measurements, called the TaiWan Ionosphere Model, is used. It was used to calculate the slant total electron content (STEC) between receiver and GPS satellites to correct the pseudorange single-frequency observations. The corrected pseudorange for every epoch was used to determine a more accurate position of the receiver. Observations were made in July 2, 2011(Kp index = 0-2) in five randomly selected sites across the globe, four of which are IGS stations (station ID: cnmr, coso, irkj and morp) while the other is a low-cost single-frequency receiver located in Chungli City, Taiwan (ID: isls). It was illustrated that TEC maps generated using TWIM exhibited a detailed structure of the ionosphere, whereas Klobuchar and GIM only provided the basic diurnal and geographic features of the ionosphere. Also, it was shown that for single-frequency static point positioning TWIM provides more accurate and more precise positioning than the Klobuchar and GIM models for all stations. The average %error of the corrections made by Klobuchar, GIM and TWIM in DRMS are 3.88%, 0.78% and 17.45%, respectively. While the average %error in VRMS for Klobuchar, GIM and TWIM are 53.55%, 62.09%, 66.02%, respectively. This shows the capability of TWIM to provide a good global 3-dimensional ionospheric model.

  1. Extending positive CLASS results across multiple instructors and multiple classes of Modeling Instruction

    Directory of Open Access Journals (Sweden)

    Eric Brewe

    2013-10-01

    Full Text Available We report on a multiyear study of student attitudes measured with the Colorado Learning Attitudes about Science Survey in calculus-based introductory physics taught with the Modeling Instruction curriculum. We find that five of six instructors and eight of nine sections using Modeling Instruction showed significantly improved attitudes from pre- to postcourse. Cohen’s d effect sizes range from 0.08 to 0.95 for individual instructors. The average effect was d=0.45, with a 95% confidence interval of (0.26–0.64. These results build on previously published results showing positive shifts in attitudes from Modeling Instruction classes. We interpret these data in light of other published positive attitudinal shifts and explore mechanistic explanations for similarities and differences with other published positive shifts.

  2. Kvalitativ metodologi & vidensproduktion

    DEFF Research Database (Denmark)

    Fast, Michael

    -Ponty), hermeneutikken (eks. Dilthey, Weber, symbolsk interaktionisme (eks. Mead, Blumer). Det primære er, at diskutere de metodolo­gi­ske antagelser og deres koblinger til undersøgelse og forståelse af en konkret virkelighed - hverdags­virkelig­heden og livsverden. Det vil sige; hvad er kvalitativ metodologi og...

  3. A Positivity-Preserving Numerical Scheme for Nonlinear Option Pricing Models

    Directory of Open Access Journals (Sweden)

    Shengwu Zhou

    2012-01-01

    Full Text Available A positivity-preserving numerical method for nonlinear Black-Scholes models is developed in this paper. The numerical method is based on a nonstandard approximation of the second partial derivative. The scheme is not only unconditionally stable and positive, but also allows us to solve the discrete equation explicitly. Monotone properties are studied in order to avoid unwanted oscillations of the numerical solution. The numerical results for European put option and European butterfly spread are compared to the standard finite difference scheme. It turns out that the proposed scheme is efficient and reliable.

  4. Look Again: An Investigation of False Positive Detections in Combat Models

    National Research Council Canada - National Science Library

    Wainwright, Ryan K

    2008-01-01

    .... Existing combat models tend to overlook or downplay false positive detections. Signal Detection Theory provides the framework for analysis of an observer's hits, misses, correct rejections, and false alarms...

  5. Integrating Qualitative and Quantitative Research in Organizations.

    Science.gov (United States)

    1981-07-01

    Lofland, lq76), symbolic interactionism (Blumer, 1969), ethnomethodology (Turner, 1974), existentialism (Douglas & Johnson, 1977), and phenomenology...influenced greatly by this ethnomethodology or perhaps symbolic interactionism , many others will have bcen influenced by a variety of the other...approach, qualitatitve research is based on a variety of philosophical orien- tations including natural science, symbolic interactionism , and existential

  6. Toward Reducing Ageism: PEACE (Positive Education about Aging and Contact Experiences) Model.

    Science.gov (United States)

    Levy, Sheri R

    2018-03-19

    The population of older adults is growing worldwide. Negative ageism (negative attitudes and behavior toward older adults) is a serious international concern that negatively influences not only older adults but also individuals across the age continuum. This article proposes and examines the application of an integrative theoretical model across empirical evidence in the literature on ageism in psychology, medicine, social work, and sociology. The proposed Positive Education about Aging and Contact Experiences (PEACE) model focuses on 2 key contributing factors expected to reduce negative ageism: (a) education about aging including facts on aging along with positive older role models that dispel negative and inaccurate images of older adulthood; and (b) positive contact experiences with older adults that are individualized, provide or promote equal status, are cooperative, involve sharing of personal information, and are sanctioned within the setting. These 2 key contributing factors have the potential to be interconnected and work together to reduce negative stereotypes, aging anxiety, prejudice, and discrimination associated with older adults and aging. This model has implications for policies and programs that can improve the health and well-being of individuals, as well as expand the residential, educational, and career options of individuals across the age continuum.

  7. A computational cognitive model for political positioning and reactions in web media

    NARCIS (Netherlands)

    Fernandes de Mello Araujo, E.; Klein, Michel

    2017-01-01

    This paper presents a computational cognitive model about political positioning inspired on recent insights from neuroscience and psychology. We describe a model that takes into consideration the individual structures of the brain and the environmental influences that may interfere on how a

  8. Modeling and controller design of a 6-DOF precision positioning system

    Science.gov (United States)

    Cai, Kunhai; Tian, Yanling; Liu, Xianping; Fatikow, Sergej; Wang, Fujun; Cui, Liangyu; Zhang, Dawei; Shirinzadeh, Bijan

    2018-05-01

    A key hurdle to meet the needs of micro/nano manipulation in some complex cases is the inadequate workspace and flexibility of the operation ends. This paper presents a 6-degree of freedom (DOF) serial-parallel precision positioning system, which consists of two compact type 3-DOF parallel mechanisms. Each parallel mechanism is driven by three piezoelectric actuators (PEAs), guided by three symmetric T-shape hinges and three elliptical flexible hinges, respectively. It can extend workspace and improve flexibility of the operation ends. The proposed system can be assembled easily, which will greatly reduce the assembly errors and improve the positioning accuracy. In addition, the kinematic and dynamic model of the 6-DOF system are established, respectively. Furthermore, in order to reduce the tracking error and improve the positioning accuracy, the Discrete-time Model Predictive Controller (DMPC) is applied as an effective control method. Meanwhile, the effectiveness of the DMCP control method is verified. Finally, the tracking experiment is performed to verify the tracking performances of the 6-DOF stage.

  9. Existence, Multiplicity, and Stability of Positive Solutions of a Predator-Prey Model with Dinosaur Functional Response

    Directory of Open Access Journals (Sweden)

    Xiaozhou Feng

    2017-01-01

    Full Text Available We investigate the property of positive solutions of a predator-prey model with Dinosaur functional response under Dirichlet boundary conditions. Firstly, using the comparison principle and fixed point index theory, the sufficient conditions and necessary conditions on coexistence of positive solutions of a predator-prey model with Dinosaur functional response are established. Secondly, by virtue of bifurcation theory, perturbation theory of eigenvalues, and the fixed point index theory, we establish the bifurcation of positive solutions of the model and obtain the stability and multiplicity of the positive solution under certain conditions. Furthermore, the local uniqueness result is studied when b and d are small enough. Finally, we investigate the multiplicity, uniqueness, and stability of positive solutions when k>0 is sufficiently large.

  10. Positive Periodic Solutions of an Epidemic Model with Seasonality

    Directory of Open Access Journals (Sweden)

    Gui-Quan Sun

    2013-01-01

    Full Text Available An SEI autonomous model with logistic growth rate and its corresponding nonautonomous model are investigated. For the autonomous case, we give the attractive regions of equilibria and perform some numerical simulations. Basic demographic reproduction number Rd is obtained. Moreover, only the basic reproduction number R0 cannot ensure the existence of the positive equilibrium, which needs additional condition Rd>R1. For the nonautonomous case, by introducing the basic reproduction number defined by the spectral radius, we study the uniform persistence and extinction of the disease. The results show that for the periodic system the basic reproduction number is more accurate than the average reproduction number.

  11. Default risk modeling with position-dependent killing

    Science.gov (United States)

    Katz, Yuri A.

    2013-04-01

    Diffusion in a linear potential in the presence of position-dependent killing is used to mimic a default process. Different assumptions regarding transport coefficients, initial conditions, and elasticity of the killing measure lead to diverse models of bankruptcy. One “stylized fact” is fundamental for our consideration: empirically default is a rather rare event, especially in the investment grade categories of credit ratings. Hence, the action of killing may be considered as a small parameter. In a number of special cases we derive closed-form expressions for the entire term structure of the cumulative probability of default, its hazard rate, and intensity. Comparison with historical data on aggregate global corporate defaults confirms the validity of the perturbation method for estimations of long-term probability of default for companies with high credit quality. On a single company level, we implement the derived formulas to estimate the one-year likelihood of default of Enron on a daily basis from August 2000 to August 2001, three months before its default, and compare the obtained results with forecasts of traditional structural models.

  12. Two axes of subordination: A new model of racial position.

    Science.gov (United States)

    Zou, Linda X; Cheryan, Sapna

    2017-05-01

    Theories of race relations have been shaped by the concept of a racial hierarchy along which Whites are the most advantaged and African Americans the most disadvantaged. However, the recent precipitated growth of Latinos and Asian Americans in the United States underscores the need for a framework that integrates more groups. The current work proposes that racial and ethnic minority groups are disadvantaged along 2 distinct dimensions of perceived inferiority and perceived cultural foreignness , such that the 4 largest groups in the United States are located in 4 discrete quadrants: Whites are perceived and treated as superior and American; African Americans as inferior and relatively American compared with Latinos and Asian Americans; Latinos as inferior and foreign; and Asian Americans as foreign and relatively superior compared to African Americans and Latinos. Support for this Racial Position Model is first obtained from targets' perspectives. Different groups experience distinct patterns of racial prejudice that are predicted by their 2-dimensional group positions (Studies 1 and 2). From perceivers' perspectives, these group positions are reflected in the content of racial stereotypes (Study 3), and are well-known and consensually recognized (Study 4). Implications of this new model for studying contemporary race relations (e.g., prejudice, threat, and interminority dynamics) are discussed. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  13. Position-specific isotope modeling of organic micropollutants transformations through different reaction pathways

    Science.gov (United States)

    Jin, Biao; Rolle, Massimo

    2016-04-01

    Organic compounds are produced in vast quantities for industrial and agricultural use, as well as for human and animal healthcare [1]. These chemicals and their metabolites are frequently detected at trace levels in fresh water environments where they undergo degradation via different reaction pathways. Compound specific stable isotope analysis (CSIA) is a valuable tool to identify such degradation pathways in different environmental systems. Recent advances in analytical techniques have promoted the fast development and implementation of multi-element CSIA. However, quantitative frameworks to evaluate multi-element stable isotope data and incorporating mechanistic information on the degradation processes [2,3] are still lacking. In this study we propose a mechanism-based modeling approach to simultaneously evaluate concentration as well as bulk and position-specific multi-element isotope evolution during the transformation of organic micropollutants. The model explicitly simulates position-specific isotopologues for those atoms that experience isotope effects and, thereby, provides a mechanistic description of isotope fractionation occurring at different molecular positions. We validate the proposed approach with the concentration and multi-element isotope data of three selected organic micropollutants: dichlorobenzamide (BAM), isoproturon (IPU) and diclofenac (DCF). The model precisely captures the dual element isotope trends characteristic of different reaction pathways and their range of variation consistent with observed multi-element (C, N) bulk isotope fractionation. The proposed approach can also be used as a tool to explore transformation pathways in scenarios for which position-specific isotope data are not yet available. [1] Schwarzenbach, R.P., Egli, T., Hofstetter, T.B., von Gunten, U., Wehrli, B., 2010. Global Water Pollution and Human Health. Annu. Rev. Environ. Resour. doi:10.1146/annurev-environ-100809-125342. [2] Jin, B., Haderlein, S.B., Rolle, M

  14. Role Expectations for United States Air Force Psychiatric Clinical Nurse Specialists.

    Science.gov (United States)

    1986-01-01

    perspective of symbolic interactionism . Symbolic interactionism provides a matrix within which to understand how humans perceive and interact with the...theoretical framework for understanding role theory in this study is that tradition in social psychology derived from symbolic interactionism (Clayton...influence of the clinical nurse specialist. Nursing Administration Quarterly, 6(l), 53-63. Blumer, H. (1969). Symbolic interactionism : Perspective and

  15. An Evaluation of the Measurement Properties of the Five Cs Model of Positive Youth Development.

    Science.gov (United States)

    Conway, Ronan J; Heary, Caroline; Hogan, Michael J

    2015-01-01

    There is growing recognition of the need to develop acceptable measures of adolescent's positive attributes in diverse contexts. The current study evaluated the measurement properties of the Five Cs model of Positive Youth Development (PYD) scale (Lerner et al., 2005) using a sample of 672 Irish adolescents. Confirmatory factor analyses indicated that a five-factor model provided a good fit to the data. The internal reliability and construct validity of the Five Cs model were supported, with character the strongest predictor of contribution, while connection was the strongest predictor of risky-behaviors. Notably, confidence was significantly negatively related to contribution, and positively related to risky-behaviors. Multi-group hierarchical nested models supported measurement invariance across early- (11-14 years) and late- (15-19 years) adolescent age groups, with partial invariance found across gender. Younger adolescents evinced higher PYD, while PYD was associated with higher contribution and lower depression and risk-behaviors across all groups. The application of the PYD framework as a measure of positive functioning across adolescence is discussed.

  16. Position control of a single pneumatic artificial muscle with hysteresis compensation based on modified Prandtl-Ishlinskii model.

    Science.gov (United States)

    Zang, Xizhe; Liu, Yixiang; Heng, Shuai; Lin, Zhenkun; Zhao, Jie

    2017-01-01

    High-performance position control of pneumatic artificial muscles is limited by their inherent nonlinearity and hysteresis. This study aims to model the length/pressure hysteresis of a single pneumatic artificial muscle and to realize its accurate position tracking control with forward hysteresis compensation. The classical Prandtl-Ishlinskii model is widely used in hysteresis modelling and compensation. But it is only effective for symmetric hysteresis. Therefore, a modified Prandtl-Ishlinskii model is built to characterize the asymmetric length/pressure hysteresis of a single pneumatic artificial muscle, by replacing the classical play operators with two more flexible elementary operators to independently describe the ascending branch and descending branch of hysteresis loops. On the basis, a position tracking controller, which is composed of cascade forward hysteresis compensation and simple proportional pressure controller, is designed for the pneumatic artificial muscle. Experiment results show that the MPI model can reproduce the length/pressure hysteresis of the pneumatic artificial muscle, and the proposed controller for the pneumatic artificial muscle can track the reference position signals with high accuracy. By modelling the length/pressure hysteresis with the modified Prandtl-Ishlinskii model and using its inversion for compensation, precise position control of a single pneumatic artificial muscle is achieved.

  17. Factors Predicting Sustainability of the Schoolwide Positive Behavior Intervention Support Model

    Science.gov (United States)

    Chitiyo, Jonathan; May, Michael E.

    2018-01-01

    The Schoolwide Positive Behavior Intervention Support model (SWPBIS) continues to gain widespread use across schools in the United States and abroad. Despite its widespread implementation, little research has examined factors that influence its sustainability. Informed by Rogers's diffusion theory, this study examined school personnel's…

  18. POSITIVE LEADERSHIP MODELS: THEORETICAL FRAMEWORK AND RESEARCH

    Directory of Open Access Journals (Sweden)

    Javier Blanch, Francisco Gil

    2016-09-01

    Full Text Available The objective of this article is twofold; firstly, we establish the theoretical boundaries of positive leadership and the reasons for its emergence. It is related to the new paradigm of positive psychology that has recently been shaping the scope of organizational knowledge. This conceptual framework has triggered the development of the various forms of positive leadership (i.e. transformational, servant, spiritual, authentic, and positive. Although the construct does not seem univocally defined, these different types of leadership overlap and share a significant affinity. Secondly, we review the empirical evidence that shows the impact of positive leadership in organizations and we highlight the positive relationship between these forms of leadership and key positive organizational variables. Lastly, we analyse future research areas in order to further develop this concept.

  19. An Optimal Enhanced Kalman Filter for a ZUPT-Aided Pedestrian Positioning Coupling Model.

    Science.gov (United States)

    Fan, Qigao; Zhang, Hai; Sun, Yan; Zhu, Yixin; Zhuang, Xiangpeng; Jia, Jie; Zhang, Pengsong

    2018-05-02

    Aimed at overcoming the problems of cumulative errors and low positioning accuracy in single Inertial Navigation Systems (INS), an Optimal Enhanced Kalman Filter (OEKF) is proposed in this paper to achieve accurate positioning of pedestrians within an enclosed environment. Firstly, the errors of the inertial sensors are analyzed, modeled, and reconstructed. Secondly, the cumulative errors in attitude and velocity are corrected using the attitude fusion filtering algorithm and Zero Velocity Update algorithm (ZUPT), respectively. Then, the OEKF algorithm is described in detail. Finally, a pedestrian indoor positioning experimental platform is established to verify the performance of the proposed positioning system. Experimental results show that the accuracy of the pedestrian indoor positioning system can reach 0.243 m, giving it a high practical value.

  20. Experimental calibration of the mathematical model of Air Torque Position dampers with non-cascading blades

    Directory of Open Access Journals (Sweden)

    Bikić Siniša M.

    2016-01-01

    Full Text Available This paper is focused on the mathematical model of the Air Torque Position dampers. The mathematical model establishes a link between the velocity of air in front of the damper, position of the damper blade and the moment acting on the blade caused by the air flow. This research aims to experimentally verify the mathematical model for the damper type with non-cascading blades. Four different types of dampers with non-cascading blades were considered: single blade dampers, dampers with two cross-blades, dampers with two parallel blades and dampers with two blades of which one is a fixed blade in the horizontal position. The case of a damper with a straight pipeline positioned in front of and behind the damper was taken in consideration. Calibration and verification of the mathematical model was conducted experimentally. The experiment was conducted on the laboratory facility for testing dampers used for regulation of the air flow rate in heating, ventilation and air conditioning systems. The design and setup of the laboratory facility, as well as construction, adjustment and calibration of the laboratory damper are presented in this paper. The mathematical model was calibrated by using one set of data, while the verification of the mathematical model was conducted by using the second set of data. The mathematical model was successfully validated and it can be used for accurate measurement of the air velocity on dampers with non-cascading blades under different operating conditions. [Projekat Ministarstva nauke Republike Srbije, br. TR31058

  1. Design and experiments with scale model of a ship with dynamic positioning system

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Carlos Eduardo S.; Morishita, Helio M.; Moratelli Junior, Lazaro; Lago, Glenan A.; Tannuri, Eduardo A. [Universidade de Sao Paulo (USP), SP (Brazil)

    2008-07-01

    Dynamic Positioning Systems (DPS) are used to keep a floating vessel on a specific position or follow pre-defined path through the action of controlled propellers. This paper describes a facility used to experimentally analyze DPS and to validate a numerical simulator. It is composed by a scale model of a DP tanker with 3 thrusters, a measurement system based on computational vision and a control software with the same DP algorithms used in industrial systems. Simple wind and current generators were also implemented. This work shows preliminary results of experiments, which has been useful to calibrate the simulator and to validate the mathematical model. (author)

  2. Research on the Collinear Equation Model of Visual Positioning Based on Visible Light Communication

    Directory of Open Access Journals (Sweden)

    Wang Yuqi

    2015-01-01

    Full Text Available A positioning method based on visible light communication is proposed, which receiving visible light information by low-resolution photodiode array and receiving visual information by the front camera of mobile phone. The terminal position is determined by matching spot information provided by photodiode array with visual information and position information provided by visible light communication. A collinear equation model is derived which based on mobile phone front camera. A hardware-in-loop simulation has been conducted to verify the collinear equation. The three-dimensional positioning error is on the level of decimeter. Moreover, the main factors which affect the positioning accuracy are analyzed in order to further improve the positioning accuracy.

  3. The Weaponized Crowd: Violent Dissident Irish Republicans Exploitation of Social Identity within Online Communities

    Science.gov (United States)

    2015-06-12

    Symbolic Interactionism is a sociological perspective on self and society based on the ideas of George H. Mead (1934), Charles H. Cooley (1902), W...cornerstone of a movement. The grievance leads into the first stage of the social movement life cycle known as the emergence, or, as described by Herbert ...policy or some social 97 Ibid., 29. 98 Ibid. 99 Herbert Blumer, American sociologist whose main

  4. Effects of screening and partner notification on Chlamydia positivity in the United States: a modeling study.

    Science.gov (United States)

    Kretzschmar, Mirjam; Satterwhite, Catherine; Leichliter, Jami; Berman, Stuart

    2012-05-01

    Model impact of increasing screening and partner notification (PN) on chlamydia positivity. We used a stochastic simulation model describing pair formation and dissolution in an age-structured heterosexual population. The model accounts for steady, casual, and concurrent partnerships and a highly sexually active core group. The model used existing sexual behavior data from the United States and was validated using chlamydia positivity data from Region X (Alaska, Idaho, Oregon, Washington). A screening program with a coverage rate of 20% was implemented among women aged 15 to 24 years. After 10 years, we increased screening coverage to 35%, 50%, and 65% and partner treatment rates from 20% to 40% and 55%. Finally, we included male screening (aged 15-24, screening coverage: 20% and 35%, partner treatment: 25% and 40%). We analyzed the effects on chlamydia positivity in women and the frequency of reinfection 6 months after treatment. The model described the decline in positivity observed from 1988 to 1997 in Region X, given screening coverage of 20% and a 25% partner treatment rate. Increasing screening coverage from 35% to 65% resulted in incremental decreases in positivity as did increasing the PN rate; a 23% reduction in positivity was achieved by either increasing screening by 3-fold or PN by 2-fold. Adding male screening to the program had less impact than increasing screening coverage or PN among women. Increased PN and treatment reduced reinfection rates considerably. Increasing efforts in PN may contribute at least as much to control of chlamydia infection as increasing screening coverage rates.

  5. The effectiveness of CPI model to improve positive attitude toward science (PATS) for pre-service physics teacher

    Science.gov (United States)

    Sunarti, T.; Wasis; Madlazim; Suyidno; Prahani, B. K.

    2018-03-01

    In the previous research, learning material based Construction, Production, and Implementation (CPI) model has been developed to improve scientific literacy and positive attitude toward science for pre-service physics teacher. CPI model has 4 phases, included: 1) Motivation; 2) Construction (Cycle I); 3) Production (Cycle II); and 4) Evaluation. This research is aimed to analyze the effectiveness of CPI model towards the improvement Positive Attitude toward Science (PATS) for pre-service physics teacher. This research used one group pre-test and post-test design on 160 pre-service physics teacher divided into 4 groups at Lambung Mangkurat University and Surabaya State University (Indonesia), academic year 2016/2017. Data collection was conducted through questioner, observation, and interview. Positive attitude toward science for pre-service physics teacher measurement were conducted through Positive Attitude toward Science Evaluation Sheet (PATSES). The data analysis technique was done by using Wilcoxon test and n-gain. The results showed that there was a significant increase in positive attitude toward science for pre-service physics teacher at α = 5%, with n-gain average of high category. Thus, the CPI model is effective for improving positive attitude toward science for pre-service physics teacher.

  6. Economics as a Science of the Human Mind and Interaction

    DEFF Research Database (Denmark)

    Fast, Michael; Hertel, Frederik; Clark, Woodrow

    2014-01-01

    In understanding economics and the organisation of economics, the questions are what constituteeconomics and the thinking behind economics today? In short what is the field of economics? And in what ways can we connect to and understand this field of study? Of course, the answer to this depends...... upon the perspective chosen, in which one sees and thinks of economics from a particular philosophical and even political position and perspective. If one takes the perspective on economics from a qualitative paradigm that draws upon the tradition from Kant, Husserl, Simmel, Mead, Schutz, Blumer (see...... references), then it can be stated that economics cannot only be understood as something that appears in nature. On the contrary, economics must be understood as “something” which results from human behaviour, interaction and groups in human activities and the thinking involved and embedded in those...

  7. Finding Positive Feedback Loops in Environmental Models: A Mathematical Investigation

    Science.gov (United States)

    Sheikholeslami, R.; Razavi, S.

    2016-12-01

    Dynamics of most earth and environmental systems are generally governed by interactions between several hydrological (e.g., soil moisture and precipitation), geological (e.g., and erosion), geochemical (e.g., nutrient loading), and atmospheric (e.g., temperature) processes which operate on a range of spatio-temporal scales. These interactions create numerous feedback mechanisms with complex behaviours, and their understanding and representation can vary depending on the scale in space and/or time at which the system is analyzed. One of the most crucial characteristics of such complex systems is the existence of positive feedback loops. The presence of positive feedbacks may increase complexity, accelerate change, or trigger multiple stable states in the underlying dynamical system. Furthermore, because of the inherent non-linearity, it is often very difficult to obtain a general idea of their complex dynamics. Feedback loops in environmental systems have been well recognized and qualitatively discussed. With a quantitative/mathematical view, in this presentation, we address the question of how the positive feedback loops can be identified/implemented in environmental models. We investigate the nature of different feedback mechanisms and dynamics of simple example case studies that underlie fundamental processes such as vegetation, precipitation and soil moisture. To do this, we apply the concept of "interaction graph" from mathematics which is built from the Jacobian matrix of the dynamical system. The Jacobian matrix contains information on how variations of one state variable depends on variations of other variables, and thus can be used to understand the dynamical possibilities of feedback mechanisms in the underlying system. Moreover, this study highlights that there are some situations where the existence of positive feedback loops can cause multiple stable states, and thereby regime shifts in environmental systems. Systems with multiple stable states are

  8. Simulation of Model Force-Loading with Changing Its Position in the Wind Tunnel Test Section

    Directory of Open Access Journals (Sweden)

    V. T. Bui

    2015-01-01

    Full Text Available When planning and implementing an aerodynamic experiment, model sizes and its position in the test section of the wind tunnel (WT play very important role. The paper focuses on the value variations of the aerodynamic characteristics of a model through changing its position in the WT test section and on the attenuation of the velocity field disturbance in front of the model. Flow around aerodynamic model profile in the open test section of the low-speed WT T-500 is simulated at BMSTU Department SM3. The problem is solved in a two-dimensional case using the ANSYS Fluent package. The mathematical model of flow is based on the Reynolds equations closed by the SST turbulence model. The paper also presents the results of the experiment. Experiments conducted in WT T-500 well correlate with the calculated data and show the optimal position in the middle of the test section when conducting the weighing and drainage experiments. Disturbance of tunnel dynamic pressure (velocity head and flow upwash around the model profile and circular cylinder in the WT test section is analyzed. It was found that flow upstream from the front stagnation point on the body weakly depends on the Reynolds number and obtained results can be used to assess the level of disturbances in the flow around a model by incompressible airflow.

  9. Positive Almost Periodic Solutions for a Time-Varying Fishing Model with Delay

    Directory of Open Access Journals (Sweden)

    Xia Li

    2011-01-01

    Full Text Available This paper is concerned with a time-varying fishing model with delay. By means of the continuation theorem of coincidence degree theory, we prove that it has at least one positive almost periodic solution.

  10. Performance Analysis of Several GPS/Galileo Precise Point Positioning Models.

    Science.gov (United States)

    Afifi, Akram; El-Rabbany, Ahmed

    2015-06-19

    This paper examines the performance of several precise point positioning (PPP) models, which combine dual-frequency GPS/Galileo observations in the un-differenced and between-satellite single-difference (BSSD) modes. These include the traditional un-differenced model, the decoupled clock model, the semi-decoupled clock model, and the between-satellite single-difference model. We take advantage of the IGS-MGEX network products to correct for the satellite differential code biases and the orbital and satellite clock errors. Natural Resources Canada's GPSPace PPP software is modified to handle the various GPS/Galileo PPP models. A total of six data sets of GPS and Galileo observations at six IGS stations are processed to examine the performance of the various PPP models. It is shown that the traditional un-differenced GPS/Galileo PPP model, the GPS decoupled clock model, and the semi-decoupled clock GPS/Galileo PPP model improve the convergence time by about 25% in comparison with the un-differenced GPS-only model. In addition, the semi-decoupled GPS/Galileo PPP model improves the solution precision by about 25% compared to the traditional un-differenced GPS/Galileo PPP model. Moreover, the BSSD GPS/Galileo PPP model improves the solution convergence time by about 50%, in comparison with the un-differenced GPS PPP model, regardless of the type of BSSD combination used. As well, the BSSD model improves the precision of the estimated parameters by about 50% and 25% when the loose and the tight combinations are used, respectively, in comparison with the un-differenced GPS-only model. Comparable results are obtained through the tight combination when either a GPS or a Galileo satellite is selected as a reference.

  11. Spine alignment in men during lateral sleep position: experimental study and modeling

    Directory of Open Access Journals (Sweden)

    Leilnahari Karim

    2011-11-01

    Full Text Available Abstract Background A proper sleep system can affect the spine support in neutral position. Most of the previous studies in scientific literature have focused on the effects of customary mattresses on the spinal alignment. To keep the spine in optimal alignment, one can use sleep surfaces with different zonal elasticity, the so called custom-made arrangements. The required stiffness of a sleep surface for each individual can be obtained by changing this arrangement applying the experimental method and modeling. Methods In experimental part, the coordinate positions of the markers mounted on the spinous processes of the vertebrae of 25 male volunteers were registered in frontal plane through the optical tracking method and so the spinal alignment was obtained in lateral sleep position on soft and firm surfaces and on the best custom-made arrangement. Thereupon the π-P8 angles were extracted from these alignments and then were compared with each other. In modeling part the anthropometric data of four different types of volunteers were used. And then the models built in BRG.LifeMOD (ver. 2007, Biomechanics Research Group, Inc., USA based on these data and in accordance with the experimental tests, were analyzed. Results The one way ANOVA statistical model and the post hoc tests showed a significant difference in the π-P8 angles between soft & custom-made and soft & firm mattresses at the p = 0.001 level and between firm & soft mattresses at the p = 0.05 level. In modeling part, the required stiffness of the sleep surface for four weight-dimensional groups was acquired quantitatively. Conclusions The mattress with a custom-made arrangement is a more appropriate choice for heavier men with pronounced body contour. After data fitting, it was observed that the variations of spinal alignment obtained from both methods have the same trend. Observing the amount of required stiffness obtained for the sleep surface, can have a significant effect on

  12. Development of a Positive-readout Mouse Model of siRNA Pharmacodynamics

    Directory of Open Access Journals (Sweden)

    Mark Stevenson

    2013-01-01

    Full Text Available Development of RNAi-based therapeutics has the potential to revolutionize treatment options for a range of human diseases. However, as with gene therapy, a major barrier to progress is the lack of methods to achieve and measure efficient delivery for systemic administration. We have developed a positive-readout pharmacodynamic transgenic reporter mouse model allowing noninvasive real-time assessment of siRNA activity. The model combines a luciferase reporter gene under the control of regulatory elements from the lac operon of Escherichia coli. Introduction of siRNA targeting lac repressor results in increased luciferase expression in cells where siRNA is biologically active. Five founder luciferase-expressing and three founder Lac-expressing lines were generated and characterized. Mating of ubiquitously expressing luciferase and lac lines generated progeny in which luciferase expression was significantly reduced compared with the parental line. Administration of isopropyl β-D-1-thiogalactopyranoside either in drinking water or given intraperitoneally increased luciferase expression in eight of the mice examined, which fell rapidly when withdrawn. Intraperitoneal administration of siRNA targeting lac in combination with Lipofectamine 2000 resulted in increased luciferase expression in the liver while control nontargeting siRNA had no effect. We believe a sensitive positive readout pharmacodynamics reporter model will be of use to the research community in RNAi-based vector development.

  13. Predicting body appreciation in young women: An integrated model of positive body image.

    Science.gov (United States)

    Andrew, Rachel; Tiggemann, Marika; Clark, Levina

    2016-09-01

    This study examined a range of predictors, based on previous theoretical models, of positive body image in young adult women. Participants were 266 women who completed an online questionnaire measuring body appreciation, activity participation, media consumption, perceived body acceptance by others, self-compassion, and autonomy. Potential mechanisms in predicting body appreciation assessed were self-objectification, social appearance comparison, and thin-ideal internalisation. Results indicated that greater perceived body acceptance by others and self-compassion, and lower appearance media consumption, self-objectification, social comparison, and thin-ideal internalisation were related to greater body appreciation. An integrated model showed that appearance media (negatively) and non-appearance media and self-compassion (positively) were associated with lower self-objectification, social comparison, and thin-ideal internalisation, which in turn related to greater body appreciation. Additionally, perceived body acceptance by others was directly associated with body appreciation. The results contribute to an understanding of potential pathways of positive body image development, thereby highlighting possible intervention targets. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Sensation Seeking and Online Gaming Addiction in Adolescents: A Moderated Mediation Model of Positive Affective Associations and Impulsivity.

    Science.gov (United States)

    Hu, Jianping; Zhen, Shuangju; Yu, Chengfu; Zhang, Qiuyan; Zhang, Wei

    2017-01-01

    Based on the Dual Systems Model (Somerville et al., 2010; Steinberg, 2010a) and the biosocial-affect model (Romer and Hennessy, 2007) of adolescent sensation seeking and problem behaviors, the present study examined how (affective associations with online games as a mediator) and when (impulsivity as a moderator) did sensation seeking influence online gaming addiction in adolescence. A total of 375 Chinese male adolescents (mean age = 16.02 years, SD = 0.85) from southern China completed anonymous questionnaires regarding sensation seeking, positive affective associations with online games, impulsivity, and online gaming addiction. Our findings revealed that sensation seeking, positive affective associations with online games and impulsivity were each significantly and positively associated with online gaming addiction in adolescents. Positive affective associations mediated the relationship between sensation seeking and online gaming addiction. Further, impulsivity moderated the relationship between positive affective associations and online gaming addiction, such that the association between positive affective association and online gaming addiction was stronger for high than for low impulsivity adolescents. These findings underscore the importance of integrating the biosocial-affect model and the Dual Systems Model to understand how and when sensation seeking impacts adolescent online gaming addiction.

  15. Sensation Seeking and Online Gaming Addiction in Adolescents: A Moderated Mediation Model of Positive Affective Associations and Impulsivity

    Directory of Open Access Journals (Sweden)

    Jianping Hu

    2017-05-01

    Full Text Available Based on the Dual Systems Model (Somerville et al., 2010; Steinberg, 2010a and the biosocial-affect model (Romer and Hennessy, 2007 of adolescent sensation seeking and problem behaviors, the present study examined how (affective associations with online games as a mediator and when (impulsivity as a moderator did sensation seeking influence online gaming addiction in adolescence. A total of 375 Chinese male adolescents (mean age = 16.02 years, SD = 0.85 from southern China completed anonymous questionnaires regarding sensation seeking, positive affective associations with online games, impulsivity, and online gaming addiction. Our findings revealed that sensation seeking, positive affective associations with online games and impulsivity were each significantly and positively associated with online gaming addiction in adolescents. Positive affective associations mediated the relationship between sensation seeking and online gaming addiction. Further, impulsivity moderated the relationship between positive affective associations and online gaming addiction, such that the association between positive affective association and online gaming addiction was stronger for high than for low impulsivity adolescents. These findings underscore the importance of integrating the biosocial-affect model and the Dual Systems Model to understand how and when sensation seeking impacts adolescent online gaming addiction.

  16. Sensation Seeking and Online Gaming Addiction in Adolescents: A Moderated Mediation Model of Positive Affective Associations and Impulsivity

    Science.gov (United States)

    Hu, Jianping; Zhen, Shuangju; Yu, Chengfu; Zhang, Qiuyan; Zhang, Wei

    2017-01-01

    Based on the Dual Systems Model (Somerville et al., 2010; Steinberg, 2010a) and the biosocial-affect model (Romer and Hennessy, 2007) of adolescent sensation seeking and problem behaviors, the present study examined how (affective associations with online games as a mediator) and when (impulsivity as a moderator) did sensation seeking influence online gaming addiction in adolescence. A total of 375 Chinese male adolescents (mean age = 16.02 years, SD = 0.85) from southern China completed anonymous questionnaires regarding sensation seeking, positive affective associations with online games, impulsivity, and online gaming addiction. Our findings revealed that sensation seeking, positive affective associations with online games and impulsivity were each significantly and positively associated with online gaming addiction in adolescents. Positive affective associations mediated the relationship between sensation seeking and online gaming addiction. Further, impulsivity moderated the relationship between positive affective associations and online gaming addiction, such that the association between positive affective association and online gaming addiction was stronger for high than for low impulsivity adolescents. These findings underscore the importance of integrating the biosocial-affect model and the Dual Systems Model to understand how and when sensation seeking impacts adolescent online gaming addiction. PMID:28529494

  17. Effect of raingage density, position and interpolation on rainfall-discharge modelling

    Science.gov (United States)

    Ly, S.; Sohier, C.; Charles, C.; Degré, A.

    2012-04-01

    Precipitation traditionally observed using raingages or weather stations, is one of the main parameters that have direct impact on runoff production. Precipitation data require a preliminary spatial interpolation prior to hydrological modeling. The accuracy of modelling result depends on the accuracy of the interpolated spatial rainfall which differs according to different interpolation methods. The accuracy of the interpolated spatial rainfall is usually determined by cross-validation method. The objective of this study is to assess the different interpolation methods of daily rainfall at the watershed scale through hydrological modelling and to explore the best methods that provide a good long term simulation. Four versions of geostatistics: Ordinary Kriging (ORK), Universal Kriging (UNK), Kriging with External Dridft (KED) and Ordinary Cokriging (OCK) and two types of deterministic methods: Thiessen polygon (THI) and Inverse Distance Weighting (IDW) are used to produce 30-year daily rainfall inputs for a distributed physically-based hydrological model (EPIC-GRID). This work is conducted in the Ourthe and Ambleve nested catchments, located in the Ardennes hilly landscape in the Walloon region, Belgium. The total catchment area is 2908 km2, lies between 67 and 693 m in elevation. The multivariate geostatistics (KED and OCK) are also used by incorporating elevation as external data to improve the rainfall prediction. This work also aims at analysing the effect of different raingage densities and position used for interpolation, on the stream flow modelled to get insight in terms of the capability and limitation of the geostatistical methods. The number of raingage varies from 70, 60, 50, 40, 30, 20, 8 to 4 stations located in and surrounding the catchment area. In the latter case, we try to use different positions: around the catchment and only a part of the catchment. The result shows that the simple method like THI fails to capture the rainfall and to produce

  18. Collective action and its interpreters

    Directory of Open Access Journals (Sweden)

    João Alfredo Costa de Campos Melo Júnior

    2007-12-01

    Full Text Available This article intention is to give the theorical and intellectual map production regarding collective actions. For such, we will analyze the propositions of five thinkers who have work for the better understanding of this question. We will discuss the contributions of the Chicago School, especially psic-sociology, and Herbert Blumer symbolic interactionism; the classical Marxists approaches on collective actions; Claus Offe and the Marxist point of view on the new models of collective actions; Charles Tilly and his social-historic perspective analysis about social movements; and finally Mancur Olson and collective action from a rational perspective. What we intend is to present comparatively the theorical and practical similarities and exclusions of these contemporary authors who contribute with collective actions today.

  19. Kalman filter with a linear state model for PDR+WLAN positioning and its application to assisting a particle filter

    Science.gov (United States)

    Raitoharju, Matti; Nurminen, Henri; Piché, Robert

    2015-12-01

    Indoor positioning based on wireless local area network (WLAN) signals is often enhanced using pedestrian dead reckoning (PDR) based on an inertial measurement unit. The state evolution model in PDR is usually nonlinear. We present a new linear state evolution model for PDR. In simulated-data and real-data tests of tightly coupled WLAN-PDR positioning, the positioning accuracy with this linear model is better than with the traditional models when the initial heading is not known, which is a common situation. The proposed method is computationally light and is also suitable for smoothing. Furthermore, we present modifications to WLAN positioning based on Gaussian coverage areas and show how a Kalman filter using the proposed model can be used for integrity monitoring and (re)initialization of a particle filter.

  20. A Synthesizable VHDL Model of the Exact Solution for Three-dimensional Hyperbolic Positioning System

    Directory of Open Access Journals (Sweden)

    Ralph Bucher

    2002-01-01

    Full Text Available This paper presents a synthesizable VHDL model of a three-dimensional hyperbolic positioning system algorithm. The algorithm obtains an exact solution for the three-dimensional location of a mobile given the locations of four fixed stations (like a global positioning system [GPS] satellite or a base station in a cell and the signal time of arrival (TOA from the mobile to each station. The detailed derivation of the steps required in the algorithm is presented. A VHDL model of the algorithm was implemented and simulated using the IEEE numeric_std package. Signals were described by a 32-bit vector. Simulation results predict location of the mobile is off by 1 m for best case and off by 36 m for worst case. A C + + program using real numbers was used as a benchmark for the accuracy and precision of the VHDL model. The model can be easily synthesized for low power hardware implementation.

  1. Application of Artificial Neural Networks in the Heart Electrical Axis Position Conclusion Modeling

    Science.gov (United States)

    Bakanovskaya, L. N.

    2016-08-01

    The article touches upon building of a heart electrical axis position conclusion model using an artificial neural network. The input signals of the neural network are the values of deflections Q, R and S; and the output signal is the value of the heart electrical axis position. Training of the network is carried out by the error propagation method. The test results allow concluding that the created neural network makes a conclusion with a high degree of accuracy.

  2. Framing Negotiation: Dynamics of Epistemological and Positional Framing in Small Groups during Scientific Modeling

    Science.gov (United States)

    Shim, Soo-Yean; Kim, Heui-Baik

    2018-01-01

    In this study, we examined students' epistemological and positional framing during small group scientific modeling to explore their context-dependent perceptions about knowledge, themselves, and others. We focused on two small groups of Korean eighth-grade students who participated in six modeling activities about excretion. The two groups were…

  3. Development of 3-axis precise positioning seismic physical modeling system in the simulation of marine seismic exploration

    Science.gov (United States)

    Kim, D.; Shin, S.; Ha, J.; Lee, D.; Lim, Y.; Chung, W.

    2017-12-01

    Seismic physical modeling is a laboratory-scale experiment that deals with the actual and physical phenomena that may occur in the field. In seismic physical modeling, field conditions are downscaled and used. For this reason, even a small error may lead to a big error in an actual field. Accordingly, the positions of the source and the receiver must be precisely controlled in scale modeling. In this study, we have developed a seismic physical modeling system capable of precisely controlling the 3-axis position. For automatic and precise position control of an ultrasonic transducer(source and receiver) in the directions of the three axes(x, y, and z), a motor was mounted on each of the three axes. The motor can automatically and precisely control the positions with positional precision of 2''; for the x and y axes and 0.05 mm for the z axis. As it can automatically and precisely control the positions in the directions of the three axes, it has an advantage in that simulations can be carried out using the latest exploration techniques, such as OBS and Broadband Seismic. For the signal generation section, a waveform generator that can produce a maximum of two sources was used, and for the data acquisition section, which receives and stores reflected signals, an A/D converter that can receive a maximum of four signals was used. As multiple sources and receivers could be used at the same time, the system was set up in such a way that diverse exploration methods, such as single channel, multichannel, and 3-D exploration, could be realized. A computer control program based on LabVIEW was created, so that it could control the position of the transducer, determine the data acquisition parameters, and check the exploration data and progress in real time. A marine environment was simulated using a water tank 1 m wide, 1 m long, and 0.9 m high. To evaluate the performance and applicability of the seismic physical modeling system developed in this study, single channel and

  4. The effect of hip positioning on the projected femoral neck-shaft angle: a modeling study.

    Science.gov (United States)

    Bhashyam, Abhiram R; Rodriguez, Edward K; Appleton, Paul; Wixted, John J

    2018-04-03

    The femoral neck-shaft angle (NSA) is used to restore normal hip geometry during hip fracture repair. Femoral rotation is known to affect NSA measurement, but the effect of hip flexion-extension is unknown. The goals of this study were to determine and test mathematical models of the relationship between hip flexion-extension, femoral rotation and NSA. We hypothesized that hip flexion-extension and femoral rotation would result in NSA measurement error. Two mathematical models were developed to predict NSA in varying degrees of hip flexion-extension and femoral rotation. The predictions of the equations were tested in vitro using a model that varied hip flexion-extension while keeping rotation constant, and vice versa. The NSA was measured from an AP radiograph obtained with a C-arm. Attributable measurement error based on hip positioning was calculated from the models. The predictions of the model correlated well with the experimental data (correlation coefficient = 0.82 - 0.90). A wide range of patient positioning was found to result in less than 5-10 degree error in the measurement of NSA. Hip flexion-extension and femoral rotation had a synergistic effect in measurement error of the NSA. Measurement error was minimized when hip flexion-extension was within 10 degrees of neutral. This study demonstrates that hip flexion-extension and femoral rotation significantly affect the measurement of the NSA. To avoid inadvertently fixing the proximal femur in varus or valgus, the hip should be positioned within 10 degrees of neutral flexion-extension with respect to the C-arm to minimize positional measurement error. N/A, basic science study.

  5. Positive Psychology and Positive Education: Old Wine in New Bottles?

    Science.gov (United States)

    Kristjansson, Kristjan

    2012-01-01

    The recently fashionable theories of positive psychology have educational ramifications at virtually every level of engagement, culminating in the model of positive education. In this critical review, I scrutinize positive education as a potential theory in educational psychology. Special attention is given to conceptual controversies and…

  6. Reductions in Children's Vicariously Learnt Avoidance and Heart Rate Responses Using Positive Modeling.

    Science.gov (United States)

    Reynolds, Gemma; Field, Andy P; Askew, Chris

    2016-03-23

    Recent research has indicated that vicarious learning can lead to increases in children's fear beliefs and avoidance preferences for stimuli and that these fear responses can subsequently be reversed using positive modeling (counterconditioning). The current study investigated children's vicariously acquired avoidance behavior, physiological responses (heart rate), and attentional bias for stimuli and whether these could also be reduced via counterconditioning. Ninety-six (49 boys, 47 girls) 7- to 11-year-olds received vicarious fear learning for novel stimuli and were then randomly assigned to a counterconditioning, extinction, or control group. Fear beliefs and avoidance preferences were measured pre- and post-learning, whereas avoidance behavior, heart rate, and attentional bias were all measured post-learning. Control group children showed increases in fear beliefs and avoidance preferences for animals seen in vicarious fear learning trials. In addition, significantly greater avoidance behavior, heart rate responding, and attentional bias were observed for these animals compared to a control animal. In contrast, vicariously acquired avoidance preferences of children in the counterconditioning group were significantly reduced post-positive modeling, and these children also did not show the heightened heart rate responding to fear-paired animals. Children in the extinction group demonstrated comparable responses to the control group; thus the extinction procedure showed no effect on any fear measures. The findings suggest that counterconditioning with positive modelling can be used as an effective early intervention to reduce the behavioral and physiological effects of vicarious fear learning in childhood.

  7. Positioning and applications

    Directory of Open Access Journals (Sweden)

    Rogowski Jerzy B.

    2015-12-01

    Full Text Available The paper presents national report of Poland for IAG on positioning and applications. The selected research presented was carried out at leading Polish research institutions and concern precise multi-GNSS satellite positioning - relative and absolute - and also GNSS-based ionosphere and troposphere modelling and studies. The research resulted in noticeable advancements in these subjects confirmed by the development of new algorithms and methods. New and improved methods of precise GNSS positioning were developed, and also GNSS metrology was studied. New advanced troposphere models were presented and tested. In particular, these models allowed testing IPW variability on regional and global scales. Also, new regional ionosphere monitoring web-based services were developed and launched.

  8. Positive Adjustment Among American Repatriated Prisoners of the Vietnam War: Modeling the Long-Term Effects of Captivity.

    Science.gov (United States)

    King, Daniel W; King, Lynda A; Park, Crystal L; Lee, Lewina O; Kaiser, Anica Pless; Spiro, Avron; Moore, Jeffrey L; Kaloupek, Danny G; Keane, Terence M

    2015-11-01

    A longitudinal lifespan model of factors contributing to later-life positive adjustment was tested on 567 American repatriated prisoners from the Vietnam War. This model encompassed demographics at time of capture and attributes assessed after return to the U.S. (reports of torture and mental distress) and approximately 3 decades later (later-life stressors, perceived social support, positive appraisal of military experiences, and positive adjustment). Age and education at time of capture and physical torture were associated with repatriation mental distress, which directly predicted poorer adjustment 30 years later. Physical torture also had a salutary effect, enhancing later-life positive appraisals of military experiences. Later-life events were directly and indirectly (through concerns about retirement) associated with positive adjustment. Results suggest that the personal resources of older age and more education and early-life adverse experiences can have cascading effects over the lifespan to impact well-being in both positive and negative ways.

  9. Spectral nudging to eliminate the effects of domain position and geometry in regional climate model simulations

    Science.gov (United States)

    Miguez-Macho, Gonzalo; Stenchikov, Georgiy L.; Robock, Alan

    2004-07-01

    It is well known that regional climate simulations are sensitive to the size and position of the domain chosen for calculations. Here we study the physical mechanisms of this sensitivity. We conducted simulations with the Regional Atmospheric Modeling System (RAMS) for June 2000 over North America at 50 km horizontal resolution using a 7500 km × 5400 km grid and NCEP/NCAR reanalysis as boundary conditions. The position of the domain was displaced in several directions, always maintaining the U.S. in the interior, out of the buffer zone along the lateral boundaries. Circulation biases developed a large scale structure, organized by the Rocky Mountains, resulting from a systematic shifting of the synoptic wave trains that crossed the domain. The distortion of the large-scale circulation was produced by interaction of the modeled flow with the lateral boundaries of the nested domain and varied when the position of the grid was altered. This changed the large-scale environment among the different simulations and translated into diverse conditions for the development of the mesoscale processes that produce most of precipitation for the Great Plains in the summer season. As a consequence, precipitation results varied, sometimes greatly, among the experiments with the different grid positions. To eliminate the dependence of results on the position of the domain, we used spectral nudging of waves longer than 2500 km above the boundary layer. Moisture was not nudged at any level. This constrained the synoptic scales to follow reanalysis while allowing the model to develop the small-scale dynamics responsible for the rainfall. Nudging of the large scales successfully eliminated the variation of precipitation results when the grid was moved. We suggest that this technique is necessary for all downscaling studies with regional models with domain sizes of a few thousand kilometers and larger embedded in global models.

  10. Appreciative Pedagogy: Constructing Positive Models for Learning.

    Science.gov (United States)

    Yballe, Leodones; O'Connor, Dennis

    2000-01-01

    Appreciative inquiry, an approach focused on generation of a vision for an organization, may be adapted for management classes. Students and teachers conduct collaborative inquiry into successful experiences, creating positive images that generate positive action in the classroom. (SK)

  11. Representations of the Poincare group, position operator and the bi-local model

    International Nuclear Information System (INIS)

    Sohkawa, Tohru

    1978-01-01

    We propose two types of representations of the Poincare group which give general frameworks for introduction of internal degrees of freedom of a particle. The bi-local model recently proposed by Takabayasi is constructed through our frameworks. In this study, new covariant and non-covariant position operators are introduced and discussed. (author)

  12. Sensitivity of predictions in an effective model: Application to the chiral critical end point position in the Nambu-Jona-Lasinio model

    International Nuclear Information System (INIS)

    Biguet, Alexandre; Hansen, Hubert; Brugiere, Timothee; Costa, Pedro; Borgnat, Pierre

    2015-01-01

    The measurement of the position of the chiral critical end point (CEP) in the QCD phase diagram is under debate. While it is possible to predict its position by using effective models specifically built to reproduce some of the features of the underlying theory (QCD), the quality of the predictions (e.g., the CEP position) obtained by such effective models, depends on whether solving the model equations constitute a well- or ill-posed inverse problem. Considering these predictions as being inverse problems provides tools to evaluate if the problem is ill-conditioned, meaning that infinitesimal variations of the inputs of the model can cause comparatively large variations of the predictions. If it is ill-conditioned, it has major consequences because of finite variations that could come from experimental and/or theoretical errors. In the following, we shall apply such a reasoning on the predictions of a particular Nambu-Jona-Lasinio model within the mean field + ring approximations, with special attention to the prediction of the chiral CEP position in the (T-μ) plane. We find that the problem is ill-conditioned (i.e. very sensitive to input variations) for the T-coordinate of the CEP, whereas, it is well-posed for the μ-coordinate of the CEP. As a consequence, when the chiral condensate varies in a 10MeV range, μ CEP varies far less. As an illustration to understand how problematic this could be, we show that the main consequence when taking into account finite variation of the inputs, is that the existence of the CEP itself cannot be predicted anymore: for a deviation as low as 0.6% with respect to vacuum phenomenology (well within the estimation of the first correction to the ring approximation) the CEP may or may not exist. (orig.)

  13. Sensitivity of predictions in an effective model: Application to the chiral critical end point position in the Nambu-Jona-Lasinio model

    Energy Technology Data Exchange (ETDEWEB)

    Biguet, Alexandre; Hansen, Hubert; Brugiere, Timothee [Universite Claude Bernard de Lyon, Institut de Physique Nucleaire de Lyon, CNRS/IN2P3, Villeurbanne Cedex (France); Costa, Pedro [Universidade de Coimbra, Centro de Fisica Computacional, Departamento de Fisica, Coimbra (Portugal); Borgnat, Pierre [CNRS, l' Ecole normale superieure de Lyon, Laboratoire de Physique, Lyon Cedex 07 (France)

    2015-09-15

    The measurement of the position of the chiral critical end point (CEP) in the QCD phase diagram is under debate. While it is possible to predict its position by using effective models specifically built to reproduce some of the features of the underlying theory (QCD), the quality of the predictions (e.g., the CEP position) obtained by such effective models, depends on whether solving the model equations constitute a well- or ill-posed inverse problem. Considering these predictions as being inverse problems provides tools to evaluate if the problem is ill-conditioned, meaning that infinitesimal variations of the inputs of the model can cause comparatively large variations of the predictions. If it is ill-conditioned, it has major consequences because of finite variations that could come from experimental and/or theoretical errors. In the following, we shall apply such a reasoning on the predictions of a particular Nambu-Jona-Lasinio model within the mean field + ring approximations, with special attention to the prediction of the chiral CEP position in the (T-μ) plane. We find that the problem is ill-conditioned (i.e. very sensitive to input variations) for the T-coordinate of the CEP, whereas, it is well-posed for the μ-coordinate of the CEP. As a consequence, when the chiral condensate varies in a 10MeV range, μ {sub CEP} varies far less. As an illustration to understand how problematic this could be, we show that the main consequence when taking into account finite variation of the inputs, is that the existence of the CEP itself cannot be predicted anymore: for a deviation as low as 0.6% with respect to vacuum phenomenology (well within the estimation of the first correction to the ring approximation) the CEP may or may not exist. (orig.)

  14. Phenomenological 'Verstehen' and interactionist 'sympathetic understanding': similarities and differences

    OpenAIRE

    Verhoeven, Jef

    1991-01-01

    Herbert Blumer, albeit accepting some similarities, did see clear differences between "symbolic interactionism" and "phenomenology". His main criticisms concerned the introspection of phenomenology and consequently the solipsism of this approach. Unfortunately, there was no opportunity in this interview to go into this problem more thoroughly. I want to resume this discussion here. As far as I have been abie to determine, the topic has not yet been treated in detail elsewhere. There has been ...

  15. George Herbert Mead on Humans and Other Animals: Social Relations After Human-Animal Studies

    OpenAIRE

    Rhoda Wilkie; Andrew McKinnon

    2013-01-01

    The turn towards nonhuman animals within sociology has shed a critical light on George Herbert Mead, his apparent prioritisation of language and the anthropocentric focus of Symbolic Interactionism (SI). Although Herbert Blumer canonised Mead as the founder of this perspective he also played a key role in excising the evolutionary and 'more-than-human' components in Mead's work. This intervention not only misrepresented Mead's intellectual project, it also made symbols the predominant concern...

  16. A Modeling Approach to Enhance Animal-Obtained Oceanographic Data Geo- Position

    Science.gov (United States)

    Tremblay, Y.; Robinson, P.; Weise, M. J.; Costa, D. P.

    2006-12-01

    Diving animals are increasingly being used as platforms to collect oceanographic data such as CTD profiles. Animal borne sensors provide an amazing amount of data that have to be spatially referenced. Because of technical limitations geo-position of these data mostly comes from the interpolation of locations obtained through the ARGOS positioning system. This system lacks spatio-temporal resolution compared to the Global Positioning System (GPS) and therefore, the positions of these oceanographic data are not well defined. A consequence of this is that many data collected in coastal regions are discarded, because many casts' records fell on land. Using modeling techniques, we propose a method to deal with this problem. The method is rather intuitive, and instead of deleting unreasonable or low-quality locations, it uses them by taking into account their lack of precision as a source of information. In a similar way, coastlines are used as sources of information, because marine animals do not travel over land. The method was evaluated using simultaneously obtained tracks with the Argos and GPS system. The tracks obtained from this method are considerably enhanced and allow a more accurate geo-reference of oceanographic data. In addition, the method provides a way to evaluate spatial errors for each cast that is not otherwise possible with classical filtering methods.

  17. Positive Mathematical Programming Approaches – Recent Developments in Literature and Applied Modelling

    Directory of Open Access Journals (Sweden)

    Thomas Heckelei

    2012-05-01

    Full Text Available This paper reviews and discusses the more recent literature and application of Positive Mathematical Programming in the context of agricultural supply models. Specifically, advances in the empirical foundation of parameter specifications as well as the economic rationalisation of PMP models – both criticized in earlier reviews – are investigated. Moreover, the paper provides an overview on a larger set of models with regular/repeated policy application that apply variants of PMP. Results show that most applications today avoid arbitrary parameter specifications and rely on exogenous information on supply responses to calibrate model parameters. However, only few approaches use multiple observations to estimate parameters, which is likely due to the still considerable technical challenges associated with it. Equally, we found only limited reflection on the behavioral or technological assumptions that could rationalise the PMP model structure while still keeping the model’s advantages.

  18. Position dependent mismatch discrimination on DNA microarrays – experiments and model

    Directory of Open Access Journals (Sweden)

    Michel Wolfgang

    2008-12-01

    Full Text Available Abstract Background The propensity of oligonucleotide strands to form stable duplexes with complementary sequences is fundamental to a variety of biological and biotechnological processes as various as microRNA signalling, microarray hybridization and PCR. Yet our understanding of oligonucleotide hybridization, in particular in presence of surfaces, is rather limited. Here we use oligonucleotide microarrays made in-house by optically controlled DNA synthesis to produce probe sets comprising all possible single base mismatches and base bulges for each of 20 sequence motifs under study. Results We observe that mismatch discrimination is mostly determined by the defect position (relative to the duplex ends as well as by the sequence context. We investigate the thermodynamics of the oligonucleotide duplexes on the basis of double-ended molecular zipper. Theoretical predictions of defect positional influence as well as long range sequence influence agree well with the experimental results. Conclusion Molecular zipping at thermodynamic equilibrium explains the binding affinity of mismatched DNA duplexes on microarrays well. The position dependent nearest neighbor model (PDNN can be inferred from it. Quantitative understanding of microarray experiments from first principles is in reach.

  19. Tectonic forward modelling of positive inversion structures

    Energy Technology Data Exchange (ETDEWEB)

    Brandes, C. [Leibniz Univ. Hannover (Germany). Inst. fuer Geologie; Schmidt, C. [Landesamt fuer Bergbau, Energie und Geologie (LBEG), Hannover (Germany)

    2013-08-01

    Positive tectonic inversion structures are common features that were recognized in many deformed sedimentary basins (Lowell, 1995). They are characterized by a two phase fault evolution, where initial normal faulting was followed by reverse faulting along the same fault, accompanied by the development of hanging wall deformation. Analysing the evolution of such inversion structures is important for understanding the tectonics of sedimentary basins and the formation of hydrocarbon traps. We used a 2D tectonic forward modelling approach to simulate the stepwise structural evolution of inversion structures in cross-section. The modelling was performed with the software FaultFold Forward v. 6, which is based on trishear kinematics (Zehnder and Allmendinger, 2000). Key aspect of the study was to derive the controlling factors for the geometry of inversion structures. The simulation results show, that the trishear approach is able to reproduce the geometry of tectonic inversion structures in a realistic way. This implies that inversion structures are simply fault-related folds that initiated as extensional fault-propagation folds, which were subsequently transformed into compressional fault-propagation folds when the stress field changed. The hanging wall deformation is a consequence of the decrease in slip towards the tip line of the fault. Trishear angle and propagation-to-slip ratio are the key controlling factors for the geometry of the fault-related deformation. We tested trishear angles in the range of 30 - 60 and propagation-to-slip ratios between 1 and 2 in increments of 0.1. Small trishear angles and low propagation-to-slip ratios produced tight folds, whereas large trishear angles and high propagation-to-slip ratios led to more open folds with concentric shapes. This has a direct effect on the size and geometry of potential hydrocarbon traps. The 2D simulations can be extended to a pseudo 3D approach, where a set of parallel cross-sections is used to describe

  20. Dimensional changes in plaster cast models due to the position of the impression tray during setting

    Directory of Open Access Journals (Sweden)

    Betina Grehs Porto

    2014-01-01

    Full Text Available Introduction: The objective of this study was to assess whether the positioning of the impression tray could cause distortion to plaster casts during gypsum setting time.Materials and Methods: Fifteen pairs of master models were cast with alginate impression material and immediately filled with gypsum. Impressions were allowed to set with the tray in the noninverted position (Group A or in the inverted position (Group B. The plaster models were digitized using a laser scanner (3Shape R-700, 3Shape A/S, Copenhagen, Denmark. Measurements of tooth size and distance were obtained using O3d software (Widialabs, Brazil measurement tools. Data were analyzed by paired t-test and linear regression with 5% significance.Results and Conclusion: Most of the measurements from both groups were similar, except forthe lower intermolar distance. It was not possible to corroborate the presence of distortions due to the position of the impression tray during gypsum setting time.

  1. Finding myself: a theory on the maturation of spirituality and its influence on behavior during late adolescence.

    Science.gov (United States)

    Mason, Deanna M

    2014-01-01

    This study employed a grounded theory research design to develop a theoretical model focused on the maturation of spirituality and its influence on behavior during late adolescence. Quantitative research studies have linked spirituality with decreased health-risk behaviors and increased health-promotion behaviors during late adolescence. Qualitative, theoretical data is proposed to discover the underlying reasons this relationship exists and increase the ability to apply this knowledge to practice. Twenty-one adolescents, age 16-21 years, were e-mail interviewed and transcripts analyzed using a conceptual lens of Blumer's symbolic interactionism. From this analysis, a theoretical model emerged with the core concept, finding myself that represents 5 core process concepts. Implications of this study illustrate that late adolescents are aware of their personal spiritual maturation as well as its influence on behavior. In addition, a distinction between the generic concept of spirituality, personal spirituality, and religion emerged.

  2. Identification of a effective cooperation model in the game positioning in a volleyball game

    Directory of Open Access Journals (Sweden)

    Leszek Mazur

    2017-06-01

    Full Text Available Purpose: The paper is aimed at identification of a model which shows the effective cooperation in the game positioning (exactly in receiving-passing the ball in a volleyball game. Design/methodology/approach: The original research method is used in this thesis which is called pragmatic unique case study. The research is aimed at observation USA team playing volleyball during The Olympic Games in Rio de Janeiro 2016.  Findings: There is a cooperation model in receiving and passing the ball among USA volleyball team players found, based on the observation. There are also other cooperation models used by teams.                     Research and practical limitations/implications: Based in the research I can tell that there are different models of cooperation in the game positioning in volleyball. The teams which are the most effective use different models of cooperation while playing.                     Originality/value: The paper is original and leads to think about the identification of the process of cooperation in team games. More research in this field is recommended.

  3. Modeling economic costs of disasters and recovery involving positive effects of reconstruction: analysis using a dynamic CGE model

    Science.gov (United States)

    Xie, W.; Li, N.; Wu, J.-D.; Hao, X.-L.

    2013-11-01

    Disaster damages have negative effects on economy, whereas reconstruction investments have positive effects. The aim of this study is to model economic causes of disasters and recovery involving positive effects of reconstruction activities. Computable general equilibrium (CGE) model is a promising approach because it can incorporate these two kinds of shocks into a unified framework and further avoid double-counting problem. In order to factor both shocks in CGE model, direct loss is set as the amount of capital stock reduced on supply side of economy; A portion of investments restore the capital stock in existing period; An investment-driven dynamic model is formulated due to available reconstruction data, and the rest of a given country's saving is set as an endogenous variable. The 2008 Wenchuan Earthquake is selected as a case study to illustrate the model, and three scenarios are constructed: S0 (no disaster occurs), S1 (disaster occurs with reconstruction investment) and S2 (disaster occurs without reconstruction investment). S0 is taken as business as usual, and the differences between S1 and S0 and that between S2 and S0 can be interpreted as economic losses including reconstruction and excluding reconstruction respectively. The study showed that output from S1 is found to be closer to real data than that from S2. S2 overestimates economic loss by roughly two times that under S1. The gap in economic aggregate between S1 and S0 is reduced to 3% in 2011, a level that should take another four years to achieve under S2.

  4. Adaptive Indoor Positioning Model Based on WLAN-Fingerprinting for Dynamic and Multi-Floor Environments

    Directory of Open Access Journals (Sweden)

    Iyad Husni Alshami

    2017-08-01

    Full Text Available The Global Positioning System demonstrates the significance of Location Based Services but it cannot be used indoors due to the lack of line of sight between satellites and receivers. Indoor Positioning Systems are needed to provide indoor Location Based Services. Wireless LAN fingerprints are one of the best choices for Indoor Positioning Systems because of their low cost, and high accuracy, however they have many drawbacks: creating radio maps is time consuming, the radio maps will become outdated with any environmental change, different mobile devices read the received signal strength (RSS differently, and peoples’ presence in LOS between access points and mobile device affects the RSS. This research proposes a new Adaptive Indoor Positioning System model (called DIPS based on: a dynamic radio map generator, RSS certainty technique and peoples’ presence effect integration for dynamic and multi-floor environments. Dynamic in our context refers to the effects of people and device heterogeneity. DIPS can achieve 98% and 92% positioning accuracy for floor and room positioning, and it achieves 1.2 m for point positioning error. RSS certainty enhanced the positioning accuracy for floor and room for different mobile devices by 11% and 9%. Then by considering the peoples’ presence effect, the error is reduced by 0.2 m. In comparison with other works, DIPS achieves better positioning without extra devices.

  5. The Modeling of Competitive Positions of Enterprises of Real Sector of Economy in the Domestic Market

    Directory of Open Access Journals (Sweden)

    Kutsyk Valentuna A.

    2017-12-01

    Full Text Available Topicality of rational choice of methodical instrumentaqrium in assessing competitive positions of enterprises is substantiated. A wide list of methodical approaches to assessment of competitive positions of enterprises in market environment is presented, and the spheres of their practical application, general disadvantages and advantages, are characterized. The characteristics of matrix models (GE/McKinsey, SHELL/DPM, PIMS, BCG are presented on a selective basis, so that, proceeding from a wide range of models, supported by the proper information provision, they can be assigned as the exact ones. Given the lack of information provision, disadvantages, and advantages of existing models and considering it as a means of system management, the authors have proposed to use the map of the «portfolio of competitive advantages» in the form of a nine-celled model matrix (3x3 with two-dimensional system of coordinates. The proposed model of «competitiveness / share of the national market» is an expression of competitive position of enterprises of the real sector of economy taking into consideration dynamic influence of factors of competitive environment and, at the same time, a methodical means for substantiation of competitive strategy. However, an important step in choosing the basic variant of competitive strategy for an enterprise in the real sector of economy is to determine the functional objectives to its efficient implementation.

  6. G. H. Mead in the History of Sociological Ideas

    OpenAIRE

    Silva, Filipe Carreira da

    2006-01-01

    My aim is to discuss the history of the reception of George Herbert Mead’s ideas in sociology. After discussing the methodological debate between presentism and historicism, I address the interpretations of those responsible for Mead’s inclusion in the sociological canon: Herbert Blumer, Jürgen Habermas, and Hans Joas. In the concluding section, I as- sess these reconstructions of Mead’s thought and suggest an alternative more consistent with my initial methodological remarks. In particular, ...

  7. A model of positive and negative learning : Learning demands and resources, learning engagement, critical thinking, and fake news detection

    NARCIS (Netherlands)

    Dormann, Christian; Demerouti, Eva; Bakker, Arnold; Zlatkin-Troitschanskaia, O.; Wittum, G.; Dengel, A.

    2018-01-01

    This chapter proposes a model of positive and negative learning (PNL model). We use the term negative learning when stress among students occurs, and when knowledge and abilities are not properly developed. We use the term positive learning if motivation is high and active learning occurs. The PNL

  8. Projected Shell Model Description of Positive Parity Band of 130Pr Nucleus

    Science.gov (United States)

    Singh, Suram; Kumar, Amit; Singh, Dhanvir; Sharma, Chetan; Bharti, Arun; Bhat, G. H.; Sheikh, J. A.

    2018-02-01

    Theoretical investigation of positive parity yrast band of odd-odd 130Pr nucleus is performed by applying the projected shell model. The present study is undertaken to investigate and verify the very recently observed side band in 130Pr theoretically in terms of quasi-particle (qp) configuration. From the analysis of band diagram, the yrast as well as side band are found to arise from two-qp configuration πh 11/2 ⊗ νh 11/2. The present calculations are viewed to have qualitatively reproduced the known experimental data for yrast states, transition energies, and B( M1) / B( E2) ratios of this nucleus. The recently observed positive parity side band is also reproduced by the present calculations. The energy states of the side band are predicted up to spin 25+, which is far above the known experimental spin of 18+ and this could serve as a motivational factor for future experiments. In addition, the reduced transition probability B( E2) for interband transitions has also been calculated for the first time in projected shell model, which would serve as an encouragement for other research groups in the future.

  9. The Role of Wellbeing and Wellness: A Positive Psychological Model in Supporting Young People With ASCs

    Directory of Open Access Journals (Sweden)

    Irina Roncaglia

    2017-04-01

    Full Text Available In the last 10 years sport psychology expanded its applicability in a variety of fields which have helped to address some of the challenges related to high level performance and sport competition. When we talk about performance in its wider sense, sport psychology is able to help develop a better understanding on how strategies can be adopted in improving general human performance levels. This includes increasing the knowledge of key concepts such as motivation, self-confidence and resilience. Furthermore performance in its wider sense helps in the understanding of the impact of stress and arousal and how these can affect both positively and negatively performance levels including appreciating individual differences as well as dynamics between groups of individuals. In this paper performance rather than solely be related to the field of competitive or professional sport has been discussed in people with ASCs and aims to explore how by adopting a positive psychological model in the formulation of individual assessments and subsequent interventions have led to improvement in individual skills, participation, engagement and ultimately quality of life. Positive psychological principles, such as the role of wellbeing and wellness, the PERMA Model has increased our understanding of human potentials, performance and wellbeing. The aim of this paper is to present and reflect on the applicability and benefits of adopting sport psychology models, the PERMA model and positive psychological principles in special education and care settings with the presentation and discussion of their theoretical and some practical implementation in two case studies.

  10. A Unified Model for BDS Wide Area and Local Area Augmentation Positioning Based on Raw Observations

    Directory of Open Access Journals (Sweden)

    Rui Tu

    2017-03-01

    Full Text Available In this study, a unified model for BeiDou Navigation Satellite System (BDS wide area and local area augmentation positioning based on raw observations has been proposed. Applying this model, both the Real-Time Kinematic (RTK and Precise Point Positioning (PPP service can be realized by performing different corrections at the user end. This algorithm was assessed and validated with the BDS data collected at four regional stations from Day of Year (DOY 080 to 083 of 2016. When the users are located within the local reference network, the fast and high precision RTK service can be achieved using the regional observation corrections, revealing a convergence time of about several seconds and a precision of about 2–3 cm. For the users out of the regional reference network, the global broadcast State-Space Represented (SSR corrections can be utilized to realize the global PPP service which shows a convergence time of about 25 min for achieving an accuracy of 10 cm. With this unified model, it can not only integrate the Network RTK (NRTK and PPP into a seamless positioning service, but also recover the ionosphere Vertical Total Electronic Content (VTEC and Differential Code Bias (DCB values that are useful for the ionosphere monitoring and modeling.

  11. Modeling and Implementation of Multi-Position Non-Continuous Rotation Gyroscope North Finder

    Directory of Open Access Journals (Sweden)

    Jun Luo

    2016-09-01

    Full Text Available Even when the Global Positioning System (GPS signal is blocked, a rate gyroscope (gyro north finder is capable of providing the required azimuth reference information to a certain extent. In order to measure the azimuth between the observer and the north direction very accurately, we propose a multi-position non-continuous rotation gyro north finding scheme. Our new generalized mathematical model analyzes the elements that affect the azimuth measurement precision and can thus provide high precision azimuth reference information. Based on the gyro’s principle of detecting a projection of the earth rotation rate on its sensitive axis and the proposed north finding scheme, we are able to deduct an accurate mathematical model of the gyro outputs against azimuth with the gyro and shaft misalignments. Combining the gyro outputs model and the theory of propagation of uncertainty, some approaches to optimize north finding are provided, including reducing the gyro bias error, constraining the gyro random error, increasing the number of rotation points, improving rotation angle measurement precision, decreasing the gyro and the shaft misalignment angles. According them, a north finder setup is built and the azimuth uncertainty of 18” is obtained. This paper provides systematic theory for analyzing the details of the gyro north finder scheme from simulation to implementation. The proposed theory can guide both applied researchers in academia and advanced practitioners in industry for designing high precision robust north finder based on different types of rate gyroscopes.

  12. Development of Precise Point Positioning Method Using Global Positioning System Measurements

    Directory of Open Access Journals (Sweden)

    Byung-Kyu Choi

    2011-09-01

    Full Text Available Precise point positioning (PPP is increasingly used in several parts such as monitoring of crustal movement and maintaining an international terrestrial reference frame using global positioning system (GPS measurements. An accuracy of PPP data processing has been increased due to the use of the more precise satellite orbit/clock products. In this study we developed PPP algorithm that utilizes data collected by a GPS receiver. The measurement error modelling including the tropospheric error and the tidal model in data processing was considered to improve the positioning accuracy. The extended Kalman filter has been also employed to estimate the state parameters such as positioning information and float ambiguities. For the verification, we compared our results to other of International GNSS Service analysis center. As a result, the mean errors of the estimated position on the East-West, North-South and Up-Down direction for the five days were 0.9 cm, 0.32 cm, and 1.14 cm in 95% confidence level.

  13. Persuasion Model and Its Evaluation Based on Positive Change Degree of Agent Emotion

    Science.gov (United States)

    Jinghua, Wu; Wenguang, Lu; Hailiang, Meng

    For it can meet needs of negotiation among organizations take place in different time and place, and for it can make its course more rationality and result more ideal, persuasion based on agent can improve cooperation among organizations well. Integrated emotion change in agent persuasion can further bring agent advantage of artificial intelligence into play. Emotion of agent persuasion is classified, and the concept of positive change degree is given. Based on this, persuasion model based on positive change degree of agent emotion is constructed, which is explained clearly through an example. Finally, the method of relative evaluation is given, which is also verified through a calculation example.

  14. Able but unintelligent: including positively stereotyped black subgroups in the stereotype content model.

    Science.gov (United States)

    Walzer, Amy S; Czopp, Alexander M

    2011-01-01

    The stereotype content model (SCM) posits that warmth and competence are the key components underlying judgments about social groups. Because competence can encompass different components (e.g., intelligence, talent) different group members may be perceived to be competent for different reasons. Therefore, we believe it may be important to specify the type of competence being assessed when examining perceptions of groups that are positively stereotyped (i.e., Black athletes and musical Blacks). Consistent with the SCM, these subgroups were perceived as high in competence-talent but not in competence-intelligence and low in warmth. Both the intelligence and talent frame of competence fit in the SCM's social structural hypothesis.

  15. Wireless Positioning Based on a Segment-Wise Linear Approach for Modeling the Target Trajectory

    DEFF Research Database (Denmark)

    Figueiras, Joao; Pedersen, Troels; Schwefel, Hans-Peter

    2008-01-01

    Positioning solutions in infrastructure-based wireless networks generally operate by exploiting the channel information of the links between the Wireless Devices and fixed networking Access Points. The major challenge of such solutions is the modeling of both the noise properties of the channel...... measurements and the user mobility patterns. One class of typical human being movement patterns is the segment-wise linear approach, which is studied in this paper. Current tracking solutions, such as the Constant Velocity model, hardly handle such segment-wise linear patterns. In this paper we propose...... a segment-wise linear model, called the Drifting Points model. The model results in an increased performance when compared with traditional solutions....

  16. A new stochastic model considering satellite clock interpolation errors in precise point positioning

    Science.gov (United States)

    Wang, Shengli; Yang, Fanlin; Gao, Wang; Yan, Lizi; Ge, Yulong

    2018-03-01

    Precise clock products are typically interpolated based on the sampling interval of the observational data when they are used for in precise point positioning. However, due to the occurrence of white noise in atomic clocks, a residual component of such noise will inevitable reside within the observations when clock errors are interpolated, and such noise will affect the resolution of the positioning results. In this paper, which is based on a twenty-one-week analysis of the atomic clock noise characteristics of numerous satellites, a new stochastic observation model that considers satellite clock interpolation errors is proposed. First, the systematic error of each satellite in the IGR clock product was extracted using a wavelet de-noising method to obtain the empirical characteristics of atomic clock noise within each clock product. Then, based on those empirical characteristics, a stochastic observation model was structured that considered the satellite clock interpolation errors. Subsequently, the IGR and IGS clock products at different time intervals were used for experimental validation. A verification using 179 stations worldwide from the IGS showed that, compared with the conventional model, the convergence times using the stochastic model proposed in this study were respectively shortened by 4.8% and 4.0% when the IGR and IGS 300-s-interval clock products were used and by 19.1% and 19.4% when the 900-s-interval clock products were used. Furthermore, the disturbances during the initial phase of the calculation were also effectively improved.

  17. Multi-sensor fusion with interacting multiple model filter for improved aircraft position accuracy.

    Science.gov (United States)

    Cho, Taehwan; Lee, Changho; Choi, Sangbang

    2013-03-27

    The International Civil Aviation Organization (ICAO) has decided to adopt Communications, Navigation, and Surveillance/Air Traffic Management (CNS/ATM) as the 21st century standard for navigation. Accordingly, ICAO members have provided an impetus to develop related technology and build sufficient infrastructure. For aviation surveillance with CNS/ATM, Ground-Based Augmentation System (GBAS), Automatic Dependent Surveillance-Broadcast (ADS-B), multilateration (MLAT) and wide-area multilateration (WAM) systems are being established. These sensors can track aircraft positions more accurately than existing radar and can compensate for the blind spots in aircraft surveillance. In this paper, we applied a novel sensor fusion method with Interacting Multiple Model (IMM) filter to GBAS, ADS-B, MLAT, and WAM data in order to improve the reliability of the aircraft position. Results of performance analysis show that the position accuracy is improved by the proposed sensor fusion method with the IMM filter.

  18. Construction of mathematical models the parachute jumper with change position acrobatic

    Science.gov (United States)

    Asmianto, Asmianto; Hariyanto, Hariyanto; Herisman, Iis

    2018-03-01

    Construction of mathematical models the movement of a parachutist during the air using newton’s II law is ΣF = ma. Position parachutist after exiting the plane immediately unfurled his body so as to create a large air resistance. The presence of air drag resulting movement indirectly parachutist moves down vertically downwards but also shifting toward horizontal and form a parabolic trajectory. Parachutist speed getting down increased until eventually the parachutist reaches terminal velocity it’s the position where the air drag is equal to the gravitational force (gravity) jumpers. In this paper is assumed to be parachutist with 91.6 kg mass (including equipment) jumping from a plane at an altitude of 3.000 meters and reach a height of parachutist ± 1000 meters with velocity ± 57 m/s. So the parachutist have to be clever in taking account of everything, because if just a little too late can dangerous the safety of the parachutist.

  19. Positive mood broadens visual attention to positive stimuli.

    Science.gov (United States)

    Wadlinger, Heather A; Isaacowitz, Derek M

    2006-03-01

    In an attempt to investigate the impact of positive emotions on visual attention within the context of Fredrickson's (1998) broaden-and-build model, eye tracking was used in two studies to measure visual attentional preferences of college students (n=58, n=26) to emotional pictures. Half of each sample experienced induced positive mood immediately before viewing slides of three similarly-valenced images, in varying central-peripheral arrays. Attentional breadth was determined by measuring the percentage viewing time to peripheral images as well as by the number of visual saccades participants made per slide. Consistent with Fredrickson's theory, the first study showed that individuals induced into positive mood fixated more on peripheral stimuli than did control participants; however, this only held true for highly-valenced positive stimuli. Participants under induced positive mood also made more frequent saccades for slides of neutral and positive valence. A second study showed that these effects were not simply due to differences in emotional arousal between stimuli. Selective attentional broadening to positive stimuli may act both to facilitate later building of resources as well as to maintain current positive affective states.

  20. An Integrated Model of Motion, Steering, Positioning and Stabilization of an Unmanned Autonomous Maritime Vehicle

    Directory of Open Access Journals (Sweden)

    Miroslaw Gerigk

    2015-12-01

    Full Text Available In the paper the aim of an interdisciplinary research is presented. The research method is introduced. An object the unmanned autonomous maritime vehicle is briefly described. The key research problem concerns a combined model of the vehicle motion including the loads of lift and hydrodynamic nature. The model takes into account the gravity and displacement forces, resistance and thrust forces, lift and other hydrodynamic forces. One of the major research tasks is to precisely predict the position of the vehicle. To do that an integrated model of acquiring, analyzing and processing the signals is necessary. The processed signals may then be used for the precise steering of the vehicle. The vehicle should be equipped with a stabilization system. Some information on an integrated steering, positioning and stabilization system of the vehicle is briefly presented in the paper. Such the system enables to obtain a fully autonomous vehicle. Some information on the propulsion and underwater energy supply systems are presented in the paper, too.

  1. Modeling the probability distribution of positional errors incurred by residential address geocoding

    Directory of Open Access Journals (Sweden)

    Mazumdar Soumya

    2007-01-01

    Full Text Available Abstract Background The assignment of a point-level geocode to subjects' residences is an important data assimilation component of many geographic public health studies. Often, these assignments are made by a method known as automated geocoding, which attempts to match each subject's address to an address-ranged street segment georeferenced within a streetline database and then interpolate the position of the address along that segment. Unfortunately, this process results in positional errors. Our study sought to model the probability distribution of positional errors associated with automated geocoding and E911 geocoding. Results Positional errors were determined for 1423 rural addresses in Carroll County, Iowa as the vector difference between each 100%-matched automated geocode and its true location as determined by orthophoto and parcel information. Errors were also determined for 1449 60%-matched geocodes and 2354 E911 geocodes. Huge (> 15 km outliers occurred among the 60%-matched geocoding errors; outliers occurred for the other two types of geocoding errors also but were much smaller. E911 geocoding was more accurate (median error length = 44 m than 100%-matched automated geocoding (median error length = 168 m. The empirical distributions of positional errors associated with 100%-matched automated geocoding and E911 geocoding exhibited a distinctive Greek-cross shape and had many other interesting features that were not capable of being fitted adequately by a single bivariate normal or t distribution. However, mixtures of t distributions with two or three components fit the errors very well. Conclusion Mixtures of bivariate t distributions with few components appear to be flexible enough to fit many positional error datasets associated with geocoding, yet parsimonious enough to be feasible for nascent applications of measurement-error methodology to spatial epidemiology.

  2. Virtue ethics, positive psychology, and a new model of science and engineering ethics education.

    Science.gov (United States)

    Han, Hyemin

    2015-04-01

    This essay develops a new conceptual framework of science and engineering ethics education based on virtue ethics and positive psychology. Virtue ethicists and positive psychologists have argued that current rule-based moral philosophy, psychology, and education cannot effectively promote students' moral motivation for actual moral behavior and may even lead to negative outcomes, such as moral schizophrenia. They have suggested that their own theoretical framework of virtue ethics and positive psychology can contribute to the effective promotion of motivation for self-improvement by connecting the notion of morality and eudaimonic happiness. Thus this essay attempts to apply virtue ethics and positive psychology to science and engineering ethics education and to develop a new conceptual framework for more effective education. In addition to the conceptual-level work, this essay suggests two possible educational methods: moral modeling and involvement in actual moral activity in science and engineering ethics classes, based on the conceptual framework.

  3. Development of a computer-assisted system for model-based condylar position analysis (E-CPM).

    Science.gov (United States)

    Ahlers, M O; Jakstat, H

    2009-01-01

    Condylar position analysis is a measuring method for the three-dimensional quantitative acquisition of the position of the mandible in different conditions or at different points in time. Originally, the measurement was done based on a model, using special mechanical condylar position measuring instruments, and on a research scale with mechanical-electronic measuring instruments. Today, as an alternative, it is possible to take measurements with electronic measuring instruments applied directly to the patient. The computerization of imaging has also facilitated condylar position measurement by means of three-dimensional data records obtained by imaging examination methods, which has been used in connection with the simulation and quantification of surgical operation results. However, the comparative measurement of the condylar position at different points in time has so far not been possible to the required degree. An electronic measuring instrument, allowing acquisition of the condylar position in clinical routine and facilitating later calibration with measurements from later examinations by data storage and use of precise equalizing systems, was therefore designed by the present authors. This measuring instrument was implemented on the basis of already existing components from the Reference CPM und Cadiax Compact articulator and registration systems (Gamma Dental, Klosterneuburg, Austria) as well as the matching CMD3D evaluation software (dentaConcept, Hamburg).

  4. Joint relative risks for estrogen receptor-positive breast cancer from a clinical model, polygenic risk score, and sex hormones.

    Science.gov (United States)

    Shieh, Yiwey; Hu, Donglei; Ma, Lin; Huntsman, Scott; Gard, Charlotte C; Leung, Jessica W T; Tice, Jeffrey A; Ziv, Elad; Kerlikowske, Karla; Cummings, Steven R

    2017-11-01

    Models that predict the risk of estrogen receptor (ER)-positive breast cancers may improve our ability to target chemoprevention. We investigated the contributions of sex hormones to the discrimination of the Breast Cancer Surveillance Consortium (BCSC) risk model and a polygenic risk score comprised of 83 single nucleotide polymorphisms. We conducted a nested case-control study of 110 women with ER-positive breast cancers and 214 matched controls within a mammography screening cohort. Participants were postmenopausal and not on hormonal therapy. The associations of estradiol, estrone, testosterone, and sex hormone binding globulin with ER-positive breast cancer were evaluated using conditional logistic regression. We assessed the individual and combined discrimination of estradiol, the BCSC risk score, and polygenic risk score using the area under the receiver operating characteristic curve (AUROC). Of the sex hormones assessed, estradiol (OR 3.64, 95% CI 1.64-8.06 for top vs bottom quartile), and to a lesser degree estrone, was most strongly associated with ER-positive breast cancer in unadjusted analysis. The BCSC risk score (OR 1.32, 95% CI 1.00-1.75 per 1% increase) and polygenic risk score (OR 1.58, 95% CI 1.06-2.36 per standard deviation) were also associated with ER-positive cancers. A model containing the BCSC risk score, polygenic risk score, and estradiol levels showed good discrimination for ER-positive cancers (AUROC 0.72, 95% CI 0.65-0.79), representing a significant improvement over the BCSC risk score (AUROC 0.58, 95% CI 0.50-0.65). Adding estradiol and a polygenic risk score to a clinical risk model improves discrimination for postmenopausal ER-positive breast cancers.

  5. In gesprek met een 'behoudend kritisch' socioloog

    OpenAIRE

    Verhoeven, Jef; Ruebens, Martin; Van Eyken, Monique

    1987-01-01

    ABSTRACT On the 13th of April 1987 Herbert Blumer died. This essay gives a description of the methodological ideas and the philosophy of science of this scholar, who invented the neologism "Symbolic interactionism" and contributed very much to the development of this approach. For this purpose use has been made of an interview with H. Biumer in 1980 by one of the authors. Biumer advocates a methodology guaranteeing a reliable knowledge of social reality. Research should start from an ac...

  6. Making Sense of Collective Events: The Co-creation of a Research-based Dance

    OpenAIRE

    Boydell, Katherine M.

    2011-01-01

    A symbolic interaction (BLUMER, 1969; MEAD, 1934; PRUS, 1996; PRUS & GRILLS, 2003) approach was taken to study the collective event (PRUS, 1997) of creating a research-based dance on pathways to care in first episode psychosis. Viewing the co-creation of a research-based dance as collective activity attends to the processual aspects of an individual's experiences. It allowed us to study the process of the creation of the dance and its capacity to convert abstract research into concrete form a...

  7. Making Sense of Collective Events: The Co-creation of a Research-based Dance

    OpenAIRE

    Katherine M. Boydell

    2011-01-01

    A symbolic interaction (Blumer, 1969; Mead, 1934; Prus, 1996; Prus & Grills, 2003) approach was taken to study the collective event (Prus, 1997) of creating a research-based dance on pathways to care in first episode psychosis. Viewing the co-creation of a research-based dance as collective activity attends to the processual aspects of an individual's experiences. It allowed the authors to study the process of the creation of the dance and its capacity to convert abstract research into concre...

  8. Bifurcation structure of positive stationary solutions for a Lotka-Volterra competition model with diffusion I

    Science.gov (United States)

    Kan-On, Yukio

    2007-04-01

    This paper is concerned with the bifurcation structure of positive stationary solutions for a generalized Lotka-Volterra competition model with diffusion. To establish the structure, the bifurcation theory and the interval arithmetic are employed.

  9. Modeling Individual Differences in Within-Person Variation of Negative and Positive Affect in a Mixed Effects Location Scale Model Using BUGS/JAGS

    Science.gov (United States)

    Rast, Philippe; Hofer, Scott M.; Sparks, Catharine

    2012-01-01

    A mixed effects location scale model was used to model and explain individual differences in within-person variability of negative and positive affect across 7 days (N=178) within a measurement burst design. The data come from undergraduate university students and are pooled from a study that was repeated at two consecutive years. Individual…

  10. On the more accurate channel model and positioning based on time-of-arrival for visible light localization

    Science.gov (United States)

    Amini, Changeez; Taherpour, Abbas; Khattab, Tamer; Gazor, Saeed

    2017-01-01

    This paper presents an improved propagation channel model for the visible light in indoor environments. We employ this model to derive an enhanced positioning algorithm using on the relation between the time-of-arrivals (TOAs) and the distances for two cases either by assuming known or unknown transmitter and receiver vertical distances. We propose two estimators, namely the maximum likelihood estimator and an estimator by employing the method of moments. To have an evaluation basis for these methods, we calculate the Cramer-Rao lower bound (CRLB) for the performance of the estimations. We show that the proposed model and estimations result in a superior performance in positioning when the transmitter and receiver are perfectly synchronized in comparison to the existing state-of-the-art counterparts. Moreover, the corresponding CRLB of the proposed model represents almost about 20 dB reduction in the localization error bound in comparison with the previous model for some practical scenarios.

  11. Model-independent analysis of the Fermilab Tevatron turn-by-turn beam position monitor measurements

    Science.gov (United States)

    Petrenko, A. V.; Valishev, A. A.; Lebedev, V. A.

    2011-09-01

    Coherent transverse beam oscillations in the Tevatron were analyzed with the model-independent analysis (MIA) technique. This allowed one to obtain the model-independent values of coupled betatron amplitudes, phase advances, and dispersion function around the ring from a single dipole kick measurement. In order to solve the MIA mode mixing problem which limits the accuracy of determination of the optical functions, we have developed a new technique of rotational MIA mode untangling. The basic idea is to treat each beam position monitor (BPM) as two BPMs separated in a ring by exactly one turn. This leads to a simple criterion of MIA mode separation: the betatron phase advance between any BPM and its counterpart shifted by one turn should be equal to the betatron tune and therefore should not depend on the BPM position in the ring. Furthermore, we describe a MIA-based technique to locate vibrating magnets in a storage ring.

  12. Model-independent analysis of the Fermilab Tevatron turn-by-turn beam position monitor measurements

    Directory of Open Access Journals (Sweden)

    A. V. Petrenko

    2011-09-01

    Full Text Available Coherent transverse beam oscillations in the Tevatron were analyzed with the model-independent analysis (MIA technique. This allowed one to obtain the model-independent values of coupled betatron amplitudes, phase advances, and dispersion function around the ring from a single dipole kick measurement. In order to solve the MIA mode mixing problem which limits the accuracy of determination of the optical functions, we have developed a new technique of rotational MIA mode untangling. The basic idea is to treat each beam position monitor (BPM as two BPMs separated in a ring by exactly one turn. This leads to a simple criterion of MIA mode separation: the betatron phase advance between any BPM and its counterpart shifted by one turn should be equal to the betatron tune and therefore should not depend on the BPM position in the ring. Furthermore, we describe a MIA-based technique to locate vibrating magnets in a storage ring.

  13. Grounds of two positions photovoltaic panels

    OpenAIRE

    Castán Fortuño, Fernando

    2008-01-01

    The objective of this Master Thesis is to find the optimum positioning for a two positions photovoltaic panel. Hence, it will be implemented a model in order to optimize the energy of the sun that the photovoltaic panel is receiving by its positioning. Likewise this project will include the comparison with other photovoltaic panel systems as the single position photovoltaics panels. Ultimately, it is also going to be designed a system array for the optimized model of two positions photovoltai...

  14. Cultural Branding as a Key in Positioning Schools: A Conceptual Model

    Directory of Open Access Journals (Sweden)

    Hidayatun

    2017-08-01

    Full Text Available The increase of people’s prosperity and education creates a change in their view about education and the need towards it. Consequently, their choice of educational institutions becomes more selective. On the other hand, the competition in this field becomes more viable due to the growth of the educational institutions. The management strategy should be evaluated. This paper discusses the interfaces between culture and school, especially those that refer to the branding. The study was carried out on a premise that creating a bond between the school and community is possible by adopting the culture in a formal education environment. This effort is expected to help schools to get a certain position in the community. Therefore, this study attempts to promote a conceptual model of cultural branding in schools and to reveal the reasons why the model becomes an effective marketing strategy in this era.

  15. c-Fos downregulation positively regulates EphA5 expression in a congenital hypothyroidism rat model.

    Science.gov (United States)

    Song, Honghua; Zheng, Yuqin; Cai, Fuying; Ma, Yanyan; Yang, Jingyue; Wu, Youjia

    2018-04-01

    The EphA5 receptor is well established as an axon guidance molecule during neural system development and plays an important role in dendritic spine formation and synaptogenesis. Our previous study has showed that EphA5 is decreased in the developing brain of congenital hypothyroidism (CH) and the EphA5 promoter methylation modification participates in its decrease. c-Fos, a well-kown transcription factor, has been considered in association with brain development. Bioinformatics analysis showed that the EphA5 promoter region contained five putative c-fos binding sites. The chromatin immunoprecipitation (ChIP) assays were used to assess the direct binding of c-fos to the EphA5 promoter. Furthermore, dual-luciferase assays showed that these three c-fos protein binding sites were positive regulatory elements for EphA5 expression in PC12 cells. Moreover, We verified c-fos positively regulation for EphA5 expression in CH model. Q-PCR and Western blot showed that c-fos overexpression could upregulate EphA5 expression in hippocampal neurons of rats with CH. Our results suggest that c-fos positively regulates EphA5 expression in CH rat model.

  16. Propagator with positive cosmological constant in the 3D Euclidean quantum gravity toy model

    International Nuclear Information System (INIS)

    Bunting, William E; Rovelli, Carlo

    2014-01-01

    We study the propagator on a single tetrahedron in a three-dimensional toy model of quantum gravity with positive cosmological constant. The cosmological constant is included in the model via q-deformation of the spatial symmetry algebra, that is, we use the Turaev–Viro amplitude. The expected repulsive effect of dark energy is recovered in numerical and analytic calculations of the propagator at large scales comparable to the infrared cutoff. However, due to the simplicity of the model, we do not obtain the exact Newton limit of the propagator. This is a first step toward the similar calculation in the full 3+1 dimensional theory with larger numbers of simplicies. (paper)

  17. Incorporating positive body image into the treatment of eating disorders: A model for attunement and mindful self-care.

    Science.gov (United States)

    Cook-Cottone, Catherine P

    2015-06-01

    This article provides a model for understanding the role positive body image can play in the treatment of eating disorders and methods for guiding patients away from symptoms and toward flourishing. The Attuned Representational Model of Self (Cook-Cottone, 2006) and a conceptual model detailing flourishing in the context of body image and eating behavior (Cook-Cottone et al., 2013) are discussed. The flourishing inherent in positive body image comes hand-in-hand with two critical ways of being: (a) having healthy, embodied awareness of the internal and external aspects of self (i.e., attunement) and (b) engaging in mindful self-care. Attunement and mindful self-care thus are considered as potential targets of actionable therapeutic work in the cultivation of positive body image among those with disordered eating. For context, best-practices in eating disorder treatment are also reviewed. Limitations in current research are detailed and directions for future research are explicated. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. A Mathematical Model to Estimate the Position of Mobile Robot by Sensing Caster Wheel Motion

    Directory of Open Access Journals (Sweden)

    Amarendra Jnana H.

    2018-01-01

    Full Text Available This paper describes the position estimation of mobile robot by sensing caster wheel motion. A mathematical model is developed to determine the position of mobile robot by sensing the angular velocity and heading angle of the caster wheel. Using the established equations, simulations were carried out using MATLAB version 8.6 to observe and verify the position coordinates of mobile robot and in turn obtain its trajectory. The simulation results show that the angular velocity of caster wheel and heading angle calculated from the sensor output readings with the help of inverse kinematics equations matches well with that of actual values given as input for simulation. Simulation result of tracking rectangular trajectory implies that the path traced by the mobile robot can also be determined from the sensor output readings. This concept can be implemented on a real mobile robot for estimation of its position.

  19. Models for positional signalling, the threefold subdivision of segments and the pigmentation pattern of molluscs.

    Science.gov (United States)

    Meinhardt, H

    1984-11-01

    Models of biological pattern formation are discussed. The regulatory features expected from the models are compared to those observed experimentally. It will be shown that: (i) Stable gradients appropriate to supply positional information can be produced by local autocatalysis and long-range inhibition. (ii) Spatially ordered sequences of differentiated cell states can emerge if these cell states mutually activate each other on long range but exclude each other locally. Segmentation results from the repetition of three such cell states, S, A and P (and not of only two, as is usually assumed). With a repetition of three states, each segment has a defined polarity. The confrontation of P cells and S cells lead to the formation of a segment border (...P/SAP/SAP/S...) while the A-P confrontation is a prerequisite for appendage formation. Mutations of Drosophila affecting larval segmentation are discussed in terms of this model. (iii) The two models for the generation of sequences of structures in space (positional information including interpretation versus mutual activation) lead to different predictions with respect to intercalary regeneration. This allows a distinction between the two models on the basis of experiments. (iv) The pigmentation patterns of certain molluscs emerge from a coupled oscillation of cells (that is, a lateral inhibition in time, instead of space). The oblique lines result from a chain of triggering events.

  20. An improved model to determine the inception of positive upward leader–streamer system considering the leader propagation during dark period

    International Nuclear Information System (INIS)

    Xie Shijun; He Junjia; Chen Weijiang

    2013-01-01

    Stem–leader transition and front-streamer inception are two essential conditions for the inception of positive upward leader–streamer system (LSS). Previous models have not considered the initial-leader propagation during dark period and have not been verified systematically. In this paper, a series of positive upward discharge simulation experiments was designed and carried out. Characteristic parameters of the discharge process related to the inception of positive upward LSS, namely, the first-corona inception voltage, the first-corona charge, the dark period, and the LSS inception voltage, were obtained. By comparing these experiment results with simulation results calculated using previous models, it was found that it is improper to assume that the length of the initial leader is a fixed value. Finally, an improved inception model of positive upward LSS considering the leader propagation during dark period was developed and verified with experiment results.

  1. An updated prediction model of the global risk of cardiovascular disease in HIV-positive persons

    DEFF Research Database (Denmark)

    Friis-Møller, Nina; Ryom, Lene; Smith, Colette

    2016-01-01

    ,663 HIV-positive persons from 20 countries in Europe and Australia, who were free of CVD at entry into the Data-collection on Adverse Effects of Anti-HIV Drugs (D:A:D) study. Cox regression models (full and reduced) were developed that predict the risk of a global CVD endpoint. The predictive performance...... significantly predicted risk more accurately than the recalibrated Framingham model (Harrell's c-statistic of 0.791, 0.783 and 0.766 for the D:A:D full, D:A:D reduced, and Framingham models respectively; p models also more accurately predicted five-year CVD-risk for key prognostic subgroups...... to quantify risk and to guide preventive care....

  2. Metamotifs - a generative model for building families of nucleotide position weight matrices

    Directory of Open Access Journals (Sweden)

    Down Thomas A

    2010-06-01

    Full Text Available Abstract Background Development of high-throughput methods for measuring DNA interactions of transcription factors together with computational advances in short motif inference algorithms is expanding our understanding of transcription factor binding site motifs. The consequential growth of sequence motif data sets makes it important to systematically group and categorise regulatory motifs. It has been shown that there are familial tendencies in DNA sequence motifs that are predictive of the family of factors that binds them. Further development of methods that detect and describe familial motif trends has the potential to help in measuring the similarity of novel computational motif predictions to previously known data and sensitively detecting regulatory motifs similar to previously known ones from novel sequence. Results We propose a probabilistic model for position weight matrix (PWM sequence motif families. The model, which we call the 'metamotif' describes recurring familial patterns in a set of motifs. The metamotif framework models variation within a family of sequence motifs. It allows for simultaneous estimation of a series of independent metamotifs from input position weight matrix (PWM motif data and does not assume that all input motif columns contribute to a familial pattern. We describe an algorithm for inferring metamotifs from weight matrix data. We then demonstrate the use of the model in two practical tasks: in the Bayesian NestedMICA model inference algorithm as a PWM prior to enhance motif inference sensitivity, and in a motif classification task where motifs are labelled according to their interacting DNA binding domain. Conclusions We show that metamotifs can be used as PWM priors in the NestedMICA motif inference algorithm to dramatically increase the sensitivity to infer motifs. Metamotifs were also successfully applied to a motif classification problem where sequence motif features were used to predict the family of

  3. Surgical positioning of orthodontic mini-implants with guides fabricated on models replicated with cone-beam computed tomography.

    Science.gov (United States)

    Kim, Seong-Hun; Choi, Yong-Suk; Hwang, Eui-Hwan; Chung, Kyu-Rhim; Kook, Yoon-Ah; Nelson, Gerald

    2007-04-01

    This article illustrates a new surgical guide system that uses cone-beam computed tomography (CBCT) images to replicate dental models; surgical guides for the proper positioning of orthodontic mini-implants were fabricated on the replicas, and the guides were used for precise placement. The indications, efficacy, and possible complications of this method are discussed. Patients who were planning to have orthodontic mini-implant treatment were recruited for this study. A CBCT system (PSR 9000N, Asahi Roentgen, Kyoto, Japan) was used to acquire virtual slices of the posterior maxilla that were 0.1 to 0.15 mm thick. Color 3-dimensional rapid prototyping was used to differentiate teeth, alveolus, and maxillary sinus wall. A surgical guide for the mini-implant was fabricated on the replica model. Proper positioning for mini-implants on the posterior maxilla was determined by viewing the CBCT images. The surgical guide was placed on the clinical site, and it allowed precise pilot drilling and accurate placement of the mini-implant. CBCT imaging allows remarkably lower radiation doses and thinner acquisition slices compared with medical computed tomography. Virtually reproduced replica models enable precise planning for mini-implant positions in anatomically complex sites.

  4. Downward flux of particulate fatty acids in the Central Arabian Sea

    Digital Repository Service at National Institute of Oceanography (India)

    Reemtsma, T.; Haake, B.; Ittekkot, V.; Nair, R.R.; Brockmann, U.H.

    of their enzy- matic apparatus and their physiological needs, fatty acids have been included in the search for biomarkers, either by direct analysis of geological samples (Leo and Parker, 1966; Cooper and Blumer, 1968; Volkman and Johns, 1977) and marine... of fatty acids caused by drying at 40 °C and storage, we analysed two sediment-trap samples from another sam- pling location, which were treated in two ways: (1) dried and stored as de- scribed above or (2) immediately frozen after the addition of 10 ml...

  5. Bifactor Modeling of the Positive and Negative Syndrome Scale: Generalized Psychosis Spans Schizoaffective, Bipolar, and Schizophrenia Diagnoses.

    Science.gov (United States)

    Anderson, Ariana E; Marder, Stephen; Reise, Steven P; Savitz, Adam; Salvadore, Giacomo; Fu, Dong Jing; Li, Qingqin; Turkoz, Ibrahim; Han, Carol; Bilder, Robert M

    2018-02-06

    Common genetic variation spans schizophrenia, schizoaffective and bipolar disorders, but historically, these syndromes have been distinguished categorically. A symptom dimension shared across these syndromes, if such a general factor exists, might provide a clearer target for understanding and treating mental illnesses that share core biological bases. We tested the hypothesis that a bifactor model of the Positive and Negative Syndrome Scale (PANSS), containing 1 general factor and 5 specific factors (positive, negative, disorganized, excited, anxiety), explains the cross-diagnostic structure of symptoms better than the traditional 5-factor model, and examined the extent to which a general factor reflects the overall severity of symptoms spanning diagnoses in 5094 total patients with a diagnosis of schizophrenia, schizoaffective, and bipolar disorder. The bifactor model provided superior fit across diagnoses, and was closer to the "true" model, compared to the traditional 5-factor model (Vuong test; P schizoaffective, and bipolar disorder. © The Author(s) 2018. Published by Oxford University Press on behalf of the Maryland Psychiatric Research Center. All rights reserved. For permissions, please email: journals.permissions@oup.com

  6. A computational model clarifies the roles of positive and negative feedback loops in the Drosophila circadian clock

    Energy Technology Data Exchange (ETDEWEB)

    Wang Junwei, E-mail: wangjunweilj@yahoo.com.c [Cisco School of Informatics, Guangdong University of Foreign Studies, Guangzhou 510006 (China); Zhou Tianshou [School of Mathematics and Computational Science, Sun Yat-Sen University, Guangzhou 510275 (China)

    2010-06-14

    Previous studies showed that a single negative feedback structure should be sufficient for robust circadian oscillations. It is thus pertinent to ask why current cellular clock models almost universally have interlocked negative feedback loop (NFL) and positive feedback loop (PFL). Here, we propose a molecular model that reflects the essential features of the Drosophila circadian clock to clarify the different roles of negative and positive feedback loops. In agreement with experimental observations, the model can simulate circadian oscillations in constant darkness, entrainment by light-dark cycles, as well as phenotypes of per{sup 01} and clk{sup Jrk} mutants. Moreover, sustained oscillations persist when the PFL is removed, implying the crucial role of NFL for rhythm generation. Through parameter sensitivity analysis, it is revealed that incorporation of PFL increases the robustness of the system to regulatory processes in PFL itself. Such reduced models can aid understanding of the design principles of circadian clocks in Drosophila and other organisms with complex transcriptional feedback structures.

  7. A computational model clarifies the roles of positive and negative feedback loops in the Drosophila circadian clock

    International Nuclear Information System (INIS)

    Wang Junwei; Zhou Tianshou

    2010-01-01

    Previous studies showed that a single negative feedback structure should be sufficient for robust circadian oscillations. It is thus pertinent to ask why current cellular clock models almost universally have interlocked negative feedback loop (NFL) and positive feedback loop (PFL). Here, we propose a molecular model that reflects the essential features of the Drosophila circadian clock to clarify the different roles of negative and positive feedback loops. In agreement with experimental observations, the model can simulate circadian oscillations in constant darkness, entrainment by light-dark cycles, as well as phenotypes of per 01 and clk Jrk mutants. Moreover, sustained oscillations persist when the PFL is removed, implying the crucial role of NFL for rhythm generation. Through parameter sensitivity analysis, it is revealed that incorporation of PFL increases the robustness of the system to regulatory processes in PFL itself. Such reduced models can aid understanding of the design principles of circadian clocks in Drosophila and other organisms with complex transcriptional feedback structures.

  8. Impact of selected troposphere models on Precise Point Positioning convergence

    Science.gov (United States)

    Kalita, Jakub; Rzepecka, Zofia

    2016-04-01

    The Precise Point Positioning (PPP) absolute method is currently intensively investigated in order to reach fast convergence time. Among various sources that influence the convergence of the PPP, the tropospheric delay is one of the most important. Numerous models of tropospheric delay are developed and applied to PPP processing. However, with rare exceptions, the quality of those models does not allow fixing the zenith path delay tropospheric parameter, leaving difference between nominal and final value to the estimation process. Here we present comparison of several PPP result sets, each of which based on different troposphere model. The respective nominal values are adopted from models: VMF1, GPT2w, MOPS and ZERO-WET. The PPP solution admitted as reference is based on the final troposphere product from the International GNSS Service (IGS). The VMF1 mapping function was used for all processing variants in order to provide capability to compare impact of applied nominal values. The worst case initiates zenith wet delay with zero value (ZERO-WET). Impact from all possible models for tropospheric nominal values should fit inside both IGS and ZERO-WET border variants. The analysis is based on data from seven IGS stations located in mid-latitude European region from year 2014. For the purpose of this study several days with the most active troposphere were selected for each of the station. All the PPP solutions were determined using gLAB open-source software, with the Kalman filter implemented independently by the authors of this work. The processing was performed on 1 hour slices of observation data. In addition to the analysis of the output processing files, the presented study contains detailed analysis of the tropospheric conditions for the selected data. The overall results show that for the height component the VMF1 model outperforms GPT2w and MOPS by 35-40% and ZERO-WET variant by 150%. In most of the cases all solutions converge to the same values during first

  9. STUDY ON MODELING AND VISUALIZING THE POSITIONAL UNCERTAINTY OF REMOTE SENSING IMAGE

    Directory of Open Access Journals (Sweden)

    W. Jiao

    2016-06-01

    Full Text Available It is inevitable to bring about uncertainty during the process of data acquisition. The traditional method to evaluate the geometric positioning accuracy is usually by the statistical method and represented by the root mean square errors (RMSEs of control points. It is individual and discontinuous, so it is difficult to describe the error spatial distribution. In this paper the error uncertainty of each control point is deduced, and the uncertainty spatial distribution model of each arbitrary point is established. The error model is proposed to evaluate the geometric accuracy of remote sensing image. Then several visualization methods are studied to represent the discrete and continuous data of geometric uncertainties. The experiments show that the proposed evaluation method of error distribution model compared with the traditional method of RMSEs can get the similar results but without requiring the user to collect control points as checkpoints, and error distribution information calculated by the model can be provided to users along with the geometric image data. Additionally, the visualization methods described in this paper can effectively and objectively represents the image geometric quality, and also can help users probe the reasons of bringing the image uncertainties in some extent.

  10. Analysis of the positive ionospheric response to a moderate geomagnetic storm using a global numerical model

    Directory of Open Access Journals (Sweden)

    A. A. Namgaladze

    2000-04-01

    Full Text Available Current theories of F-layer storms are discussed using numerical simulations with the Upper Atmosphere Model, a global self-consistent, time dependent numerical model of the thermosphere-ionosphere-plasmasphere-magnetosphere system including electrodynamical coupling effects. A case study of a moderate geomagnetic storm at low solar activity during the northern winter solstice exemplifies the complex storm phenomena. The study focuses on positive ionospheric storm effects in relation to thermospheric disturbances in general and thermospheric composition changes in particular. It investigates the dynamical effects of both neutral meridional winds and electric fields caused by the disturbance dynamo effect. The penetration of short-time electric fields of magnetospheric origin during storm intensification phases is shown for the first time in this model study. Comparisons of the calculated thermospheric composition changes with satellite observations of AE-C and ESRO-4 during storm time show a good agreement. The empirical MSISE90 model, however, is less consistent with the simulations. It does not show the equatorward propagation of the disturbances and predicts that they have a gentler latitudinal gradient. Both theoretical and experimental data reveal that although the ratio of [O]/[N2] at high latitudes decreases significantly during the magnetic storm compared with the quiet time level, at mid to low latitudes it does not increase (at fixed altitudes above the quiet reference level. Meanwhile, the ionospheric storm is positive there. We conclude that the positive phase of the ionospheric storm is mainly due to uplifting of ionospheric F2-region plasma at mid latitudes and its equatorward movement at low latitudes along geomagnetic field lines caused by large-scale neutral wind circulation and the passage of travelling atmospheric disturbances (TADs. The calculated zonal electric field disturbances also help to create the positive ionospheric

  11. Analysis of the positive ionospheric response to a moderate geomagnetic storm using a global numerical model

    Directory of Open Access Journals (Sweden)

    A. A. Namgaladze

    Full Text Available Current theories of F-layer storms are discussed using numerical simulations with the Upper Atmosphere Model, a global self-consistent, time dependent numerical model of the thermosphere-ionosphere-plasmasphere-magnetosphere system including electrodynamical coupling effects. A case study of a moderate geomagnetic storm at low solar activity during the northern winter solstice exemplifies the complex storm phenomena. The study focuses on positive ionospheric storm effects in relation to thermospheric disturbances in general and thermospheric composition changes in particular. It investigates the dynamical effects of both neutral meridional winds and electric fields caused by the disturbance dynamo effect. The penetration of short-time electric fields of magnetospheric origin during storm intensification phases is shown for the first time in this model study. Comparisons of the calculated thermospheric composition changes with satellite observations of AE-C and ESRO-4 during storm time show a good agreement. The empirical MSISE90 model, however, is less consistent with the simulations. It does not show the equatorward propagation of the disturbances and predicts that they have a gentler latitudinal gradient. Both theoretical and experimental data reveal that although the ratio of [O]/[N2] at high latitudes decreases significantly during the magnetic storm compared with the quiet time level, at mid to low latitudes it does not increase (at fixed altitudes above the quiet reference level. Meanwhile, the ionospheric storm is positive there. We conclude that the positive phase of the ionospheric storm is mainly due to uplifting of ionospheric F2-region plasma at mid latitudes and its equatorward movement at low latitudes along geomagnetic field lines caused by large-scale neutral wind circulation and the passage of travelling atmospheric disturbances (TADs. The calculated zonal electric field disturbances also help

  12. The Life of Meaning: A Model of the Positive Contributions to Well-Being from Veterinary Work.

    Science.gov (United States)

    Cake, Martin A; Bell, Melinda A; Bickley, Naomi; Bartram, David J

    2015-01-01

    We present a veterinary model of work-derived well-being, and argue that educators should not only present a (potentially self-fulfilling) stress management model of future wellness, but also balance this with a positive psychology-based approach depicting a veterinary career as a richly generative source of satisfaction and fulfillment. A review of known sources of satisfaction for veterinarians finds them to be based mostly in meaningful purpose, relationships, and personal growth. This positions veterinary well-being within the tradition of eudaimonia, an ancient concept of achieving one's best possible self, and a term increasingly employed to describe well-being derived from living a life that is engaging, meaningful, and deeply fulfilling. The theory of eudaimonia for workplace well-being should inform development of personal resources that foster resilience in undergraduate and graduate veterinarians.

  13. Inhibition of vicariously learned fear in children using positive modeling and prior exposure.

    Science.gov (United States)

    Askew, Chris; Reynolds, Gemma; Fielding-Smith, Sarah; Field, Andy P

    2016-02-01

    One of the challenges to conditioning models of fear acquisition is to explain how different individuals can experience similar learning events and only some of them subsequently develop fear. Understanding factors moderating the impact of learning events on fear acquisition is key to understanding the etiology and prevention of fear in childhood. This study investigates these moderators in the context of vicarious (observational) learning. Two experiments tested predictions that the acquisition or inhibition of fear via vicarious learning is driven by associative learning mechanisms similar to direct conditioning. In Experiment 1, 3 groups of children aged 7 to 9 years received 1 of 3 inhibitive information interventions-psychoeducation, factual information, or no information (control)-prior to taking part in a vicarious fear learning procedure. In Experiment 2, 3 groups of children aged 7 to 10 years received 1 of 3 observational learning interventions-positive modeling (immunization), observational familiarity (latent inhibition), or no prevention (control)-before vicarious fear learning. Results indicated that observationally delivered manipulations inhibited vicarious fear learning, while preventions presented via written information did not. These findings confirm that vicarious learning shares some of the characteristics of direct conditioning and can explain why not all individuals will develop fear following a vicarious learning event. They also suggest that the modality of inhibitive learning is important and should match the fear learning pathway for increased chances of inhibition. Finally, the results demonstrate that positive modeling is likely to be a particularly effective method for preventing fear-related observational learning in children. (c) 2016 APA, all rights reserved).

  14. Life course socio-economic position and quality of life in adulthood: a systematic review of life course models

    Science.gov (United States)

    2012-01-01

    Background A relationship between current socio-economic position and subjective quality of life has been demonstrated, using wellbeing, life and needs satisfaction approaches. Less is known regarding the influence of different life course socio-economic trajectories on later quality of life. Several conceptual models have been proposed to help explain potential life course effects on health, including accumulation, latent, pathway and social mobility models. This systematic review aimed to assess whether evidence supported an overall relationship between life course socio-economic position and quality of life during adulthood and if so, whether there was support for one or more life course models. Methods A review protocol was developed detailing explicit inclusion and exclusion criteria, search terms, data extraction items and quality appraisal procedures. Literature searches were performed in 12 electronic databases during January 2012 and the references and citations of included articles were checked for additional relevant articles. Narrative synthesis was used to analyze extracted data and studies were categorized based on the life course model analyzed. Results Twelve studies met the eligibility criteria and used data from 10 datasets and five countries. Study quality varied and heterogeneity between studies was high. Seven studies assessed social mobility models, five assessed the latent model, two assessed the pathway model and three tested the accumulation model. Evidence indicated an overall relationship, but mixed results were found for each life course model. Some evidence was found to support the latent model among women, but not men. Social mobility models were supported in some studies, but overall evidence suggested little to no effect. Few studies addressed accumulation and pathway effects and study heterogeneity limited synthesis. Conclusions To improve potential for synthesis in this area, future research should aim to increase study

  15. Mathematical Model and Calibration Procedure of a PSD Sensor Used in Local Positioning Systems.

    Science.gov (United States)

    Rodríguez-Navarro, David; Lázaro-Galilea, José Luis; Bravo-Muñoz, Ignacio; Gardel-Vicente, Alfredo; Domingo-Perez, Francisco; Tsirigotis, Georgios

    2016-09-15

    Here, we propose a mathematical model and a calibration procedure for a PSD (position sensitive device) sensor equipped with an optical system, to enable accurate measurement of the angle of arrival of one or more beams of light emitted by infrared (IR) transmitters located at distances of between 4 and 6 m. To achieve this objective, it was necessary to characterize the intrinsic parameters that model the system and obtain their values. This first approach was based on a pin-hole model, to which system nonlinearities were added, and this was used to model the points obtained with the nA currents provided by the PSD. In addition, we analyzed the main sources of error, including PSD sensor signal noise, gain factor imbalances and PSD sensor distortion. The results indicated that the proposed model and method provided satisfactory calibration and yielded precise parameter values, enabling accurate measurement of the angle of arrival with a low degree of error, as evidenced by the experimental results.

  16. The consequences of neural degeneration regarding optimal cochlear implant position in scala tympani: a model approach.

    Science.gov (United States)

    Briaire, Jeroen J; Frijns, Johan H M

    2006-04-01

    Cochlear implant research endeavors to optimize the spatial selectivity, threshold and dynamic range with the objective of improving the speech perception performance of the implant user. One of the ways to achieve some of these goals is by electrode design. New cochlear implant electrode designs strive to bring the electrode contacts into close proximity to the nerve fibers in the modiolus: this is done by placing the contacts on the medial side of the array and positioning the implant against the medial wall of scala tympani. The question remains whether this is the optimal position for a cochlea with intact neural fibers and, if so, whether it is also true for a cochlea with degenerated neural fibers. In this study a computational model of the implanted human cochlea is used to investigate the optimal position of the array with respect to threshold, dynamic range and spatial selectivity for a cochlea with intact nerve fibers and for degenerated nerve fibers. In addition, the model is used to evaluate the predictive value of eCAP measurements for obtaining peri-operative information on the neural status. The model predicts improved threshold, dynamic range and spatial selectivity for the peri-modiolar position at the basal end of the cochlea, with minimal influence of neural degeneration. At the apical end of the array (1.5 cochlear turns), the dynamic range and the spatial selectivity are limited due to the occurrence of cross-turn stimulation, with the exception of the condition without neural degeneration and with the electrode array along the lateral wall of scala tympani. The eCAP simulations indicate that a large P(0) peak occurs before the N(1)P(1) complex when the fibers are not degenerated. The absence of this peak might be used as an indicator for neural degeneration.

  17. A Vision/Inertia Integrated Positioning Method Using Position and Orientation Matching

    Directory of Open Access Journals (Sweden)

    Xiaoyue Zhang

    2017-01-01

    Full Text Available A vision/inertia integrated positioning method using position and orientation matching which can be adopted on intelligent vehicle such as automated guided vehicle (AGV and mobile robot is proposed in this work. The method is introduced firstly. Landmarks are placed into the navigation field and camera and inertial measurement unit (IMU are installed on the vehicle. Vision processor calculates the azimuth and position information from the pictures which include artificial landmarks with the known direction and position. Inertial navigation system (INS calculates the azimuth and position of vehicle in real time and the calculated pixel position of landmark can be computed from the INS output position. Then the needed mathematical models are established and integrated navigation is implemented by Kalman filter with the observation of azimuth and the calculated pixel position of landmark. Navigation errors and IMU errors are estimated and compensated in real time so that high precision navigation results can be got. Finally, simulation and test are performed, respectively. Both simulation and test results prove that this vision/inertia integrated positioning method using position and orientation matching has feasibility and it can achieve centimeter-level autonomic continuous navigation.

  18. Trade-off between positive and negative design of protein stability: from lattice models to real proteins.

    Directory of Open Access Journals (Sweden)

    Orly Noivirt-Brik

    2009-12-01

    Full Text Available Two different strategies for stabilizing proteins are (i positive design in which the native state is stabilized and (ii negative design in which competing non-native conformations are destabilized. Here, the circumstances under which one strategy might be favored over the other are explored in the case of lattice models of proteins and then generalized and discussed with regard to real proteins. The balance between positive and negative design of proteins is found to be determined by their average "contact-frequency", a property that corresponds to the fraction of states in the conformational ensemble of the sequence in which a pair of residues is in contact. Lattice model proteins with a high average contact-frequency are found to use negative design more than model proteins with a low average contact-frequency. A mathematical derivation of this result indicates that it is general and likely to hold also for real proteins. Comparison of the results of correlated mutation analysis for real proteins with typical contact-frequencies to those of proteins likely to have high contact-frequencies (such as disordered proteins and proteins that are dependent on chaperonins for their folding indicates that the latter tend to have stronger interactions between residues that are not in contact in their native conformation. Hence, our work indicates that negative design is employed when insufficient stabilization is achieved via positive design owing to high contact-frequencies.

  19. Remarriage Beliefs as Predictors of Marital Quality and Positive Interaction in Stepcouples: An Actor-Partner Interdependence Model.

    Science.gov (United States)

    Garneau, Chelsea L; Higginbotham, Brian; Adler-Baeder, Francesca

    2015-12-01

    Using an Actor-Partner Interdependence Model, we examined remarriage beliefs as predictors of marital quality and positive interaction in a sample of 179 stepcouples. Three beliefs were measured using subscales from the Remarriage Belief Inventory (RMBI) including success is slim, children are the priority, and finances should be pooled. Several significant actor and partner effects were found for both wives' and husbands' beliefs. Wives' marital quality was positively associated with their own beliefs that finances should be pooled and negatively associated with their own beliefs that success is slim. Wives' reports of their own and spouses' positive interaction were both positively associated with their beliefs that finances should be pooled. Their reports of spouses' positive interaction were also negatively associated with husbands' beliefs that success is slim. Husbands' marital quality was positively associated with wives' beliefs that children are the priority, positively associated with their own beliefs that finances should be pooled, and negatively with success is slim. Positive interaction for husbands was positively associated with wives' beliefs that finances should be pooled and negatively associated with their own beliefs that success is slim. Finally, husbands' reports of positive interaction for their spouses were positively associated with wives' beliefs that finances should be pooled. Implications for future research utilizing dyadic data analysis with stepcouples are addressed. © 2015 Family Process Institute.

  20. Finite-temperature stress calculations in atomic models using moments of position

    Science.gov (United States)

    Parthasarathy, Ranganathan; Misra, Anil; Ouyang, Lizhi

    2018-07-01

    Continuum modeling of finite temperature mechanical behavior of atomic systems requires refined description of atomic motions. In this paper, we identify additional kinematical quantities that are relevant for a more accurate continuum description as the system is subjected to step-wise loading. The presented formalism avoids the necessity for atomic trajectory mapping with deformation, provides the definitions of the kinematic variables and their conjugates in real space, and simplifies local work conjugacy. The total work done on an atom under deformation is decomposed into the work corresponding to changing its equilibrium position and work corresponding to changing its second moment about equilibrium position. Correspondingly, we define two kinematic variables: a deformation gradient tensor and a vibration tensor, and derive their stress conjugates, termed here as static and vibration stresses, respectively. The proposed approach is validated using MD simulation in NVT ensembles for fcc aluminum subjected to uniaxial extension. The observed evolution of second moments in the MD simulation with macroscopic deformation is not directly related to the transformation of atomic trajectories through the deformation gradient using generator functions. However, it is noteworthy that deformation leads to a change in the second moment of the trajectories. Correspondingly, the vibration part of the Piola stress becomes particularly significant at high temperature and high tensile strain as the crystal approaches the softening limit. In contrast to the eigenvectors of the deformation gradient, the eigenvectors of the vibration tensor show strong spatial heterogeneity in the vicinity of softening. More importantly, the elliptic distribution of local atomic density transitions to a dumbbell shape, before significant non-affinity in equilibrium positions has occurred.

  1. Experimental evaluation of the stoichiometry of sulfide related concrete sewer corrosion

    DEFF Research Database (Denmark)

    Nielsen, Asbjørn Haaning; Hvitved-Jacobsen, Thorkild; Jensen, Henriette Stokbro

    2014-01-01

    This chapter is about science from a book that on Qualitative Economics (Clark and Fast 2008), specifically building a science of economics, grounded in understanding of organizations and what is beneath the surface of structures and activities. Economics should be, as a science, concerned with its...... of interactionism (Blumer 1969). It is a perspective developed from the Lifeworld philosophical traditions, such as symbolic interactionism and phenomenology, seeking to develop the thinking of economics through the use of linguistics (Clark and Fast 2008). The argument is that economics first of all is about two...

  2. The error model and experiment of measuring angular position error based on laser collimation

    Science.gov (United States)

    Cai, Yangyang; Yang, Jing; Li, Jiakun; Feng, Qibo

    2018-01-01

    Rotary axis is the reference component of rotation motion. Angular position error is the most critical factor which impair the machining precision among the six degree-of-freedom (DOF) geometric errors of rotary axis. In this paper, the measuring method of angular position error of rotary axis based on laser collimation is thoroughly researched, the error model is established and 360 ° full range measurement is realized by using the high precision servo turntable. The change of space attitude of each moving part is described accurately by the 3×3 transformation matrices and the influences of various factors on the measurement results is analyzed in detail. Experiments results show that the measurement method can achieve high measurement accuracy and large measurement range.

  3. Computational Model of a Positive BDNF Feedback Loop in Hippocampal Neurons Following Inhibitory Avoidance Training

    Science.gov (United States)

    Zhang, Yili; Smolen, Paul; Alberini, Cristina M.; Baxter, Douglas A.; Byrne, John H.

    2016-01-01

    Inhibitory avoidance (IA) training in rodents initiates a molecular cascade within hippocampal neurons. This cascade contributes to the transition of short- to long-term memory (i.e., consolidation). Here, a differential equation-based model was developed to describe a positive feedback loop within this molecular cascade. The feedback loop begins…

  4. Cold Attractive Spin Polarized Fermi Lattice Gases and the Doped Positive U Hubbard Model

    International Nuclear Information System (INIS)

    Moreo, Adriana; Scalapino, D. J.

    2007-01-01

    Experiments on polarized fermion gases performed by trapping ultracold atoms in optical lattices allow the study of an attractive Hubbard model for which the strength of the on-site interaction is tuned by means of a Feshbach resonance. Using a well-known particle-hole transformation we discuss how results obtained for this system can be reinterpreted in the context of a doped repulsive Hubbard model. In particular, we show that the Fulde-Ferrell-Larkin-Ovchinnikov (FFLO) state corresponds to the striped state of the two-dimensional doped positive U Hubbard model. We then use the results of numerical studies of the striped state to relate the periodicity of the FFLO state to the spin polarization. We also comment on the relationship of the d x 2 -y 2 superconducting phase of the doped 2D repulsive Hubbard model to a d-wave spin density wave state for the attractive case

  5. Educational Evaluators--A Model for Task Oriented Position Development

    Science.gov (United States)

    Rice, David; and others

    1970-01-01

    An outline of 44 evaluator tasks is discussed in terms of its usefulness in defining, evaluating, and improving the position of "educational evaluator ; in adapting the position to the needs of particular institutions; and in designing appropriate evaluator training programs. (JES)

  6. Integrating remote sensing, geographic information systems and global positioning system techniques with hydrological modeling

    Science.gov (United States)

    Thakur, Jay Krishna; Singh, Sudhir Kumar; Ekanthalu, Vicky Shettigondahalli

    2017-07-01

    Integration of remote sensing (RS), geographic information systems (GIS) and global positioning system (GPS) are emerging research areas in the field of groundwater hydrology, resource management, environmental monitoring and during emergency response. Recent advancements in the fields of RS, GIS, GPS and higher level of computation will help in providing and handling a range of data simultaneously in a time- and cost-efficient manner. This review paper deals with hydrological modeling, uses of remote sensing and GIS in hydrological modeling, models of integrations and their need and in last the conclusion. After dealing with these issues conceptually and technically, we can develop better methods and novel approaches to handle large data sets and in a better way to communicate information related with rapidly decreasing societal resources, i.e. groundwater.

  7. Stability Analysis of Positive Polynomial Fuzzy-Model-Based Control Systems with Time Delay under Imperfect Premise Matching

    OpenAIRE

    Li, Xiaomiao; Lam, Hak Keung; Song, Ge; Liu, Fucai

    2017-01-01

    This paper deals with the stability and positivity analysis of polynomial-fuzzy-model-based ({PFMB}) control systems with time delay, which is formed by a polynomial fuzzy model and a polynomial fuzzy controller connected in a closed loop, under imperfect premise matching. To improve the design and realization flexibility, the polynomial fuzzy model and the polynomial fuzzy controller are allowed to have their own set of premise membership functions. A sum-of-squares (SOS)-based stability ana...

  8. GPS, BDS and Galileo ionospheric correction models: An evaluation in range delay and position domain

    Science.gov (United States)

    Wang, Ningbo; Li, Zishen; Li, Min; Yuan, Yunbin; Huo, Xingliang

    2018-05-01

    The performance of GPS Klobuchar (GPSKlob), BDS Klobuchar (BDSKlob) and NeQuick Galileo (NeQuickG) ionospheric correction models are evaluated in the range delay and position domains over China. The post-processed Klobuchar-style (CODKlob) coefficients provided by the Center for Orbit Determination in Europe (CODE) and our own fitted NeQuick coefficients (NeQuickC) are also included for comparison. In the range delay domain, BDS total electrons contents (TEC) derived from 20 international GNSS Monitoring and Assessment System (iGMAS) stations and GPS TEC obtained from 35 Crust Movement Observation Network of China (CMONC) stations are used as references. Compared to BDS TEC during the short period (doy 010-020, 2015), GPSKlob, BDSKlob and NeQuickG can correct 58.4, 66.7 and 54.7% of the ionospheric delay. Compared to GPS TEC for the long period (doy 001-180, 2015), the three ionospheric models can mitigate the ionospheric delay by 64.8, 65.4 and 68.1%, respectively. For the two comparison cases, CODKlob shows the worst performance, which only reduces 57.9% of the ionospheric range errors. NeQuickC exhibits the best performance, which outperforms GPSKlob, BDSKlob and NeQuickG by 6.7, 2.1 and 6.9%, respectively. In the position domain, single-frequency stand point positioning (SPP) was conducted at the selected 35 CMONC sites using GPS C/A pseudorange with and without ionospheric corrections. The vertical position error of the uncorrected case drops significantly from 10.3 m to 4.8, 4.6, 4.4 and 4.2 m for GPSKlob, CODKlob, BDSKlob and NeQuickG, however, the horizontal position error (3.2) merely decreases to 3.1, 2.7, 2.4 and 2.3 m, respectively. NeQuickG outperforms GPSKlob and BDSKlob by 5.8 and 1.9% in vertical component, and by 25.0 and 3.2% in horizontal component.

  9. Global Exponential Stability of Positive Almost Periodic Solutions for a Fishing Model with a Time-Varying Delay

    Directory of Open Access Journals (Sweden)

    Hong Zhang

    2014-01-01

    Full Text Available This paper is concerned with a nonautonomous fishing model with a time-varying delay. Under proper conditions, we employ a novel argument to establish a criterion on the global exponential stability of positive almost periodic solutions of the model with almost periodic coefficients and delays. Moreover, an example and its numerical simulation are given to illustrate the main results.

  10. Positioning of aquatic animals based on time-of-arrival and random walk models using YAPS (Yet Another Positioning Solver)

    DEFF Research Database (Denmark)

    Baktoft, Henrik; Gjelland, Karl Øystein; Økland, Finn

    2017-01-01

    Aquatic positional telemetry offers vast opportunities to study in vivo behaviour of wild animals, but there is room for improvement in the data quality provided by current procedures for estimating positions. Here we present a novel positioning method called YAPS (Yet Another Positioning Solver...

  11. The motivating role of positive feedback in sport and physical education: evidence for a motivational model.

    Science.gov (United States)

    Mouratidis, Athanasios; Vansteenkiste, Maarten; Lens, Willy; Sideridis, Georgios

    2008-04-01

    Based on self-determination theory (Deci & Ryan, 2000), an experimental study with middle school students participating in a physical education task and a correlational study with highly talented sport students investigated the motivating role of positive competence feedback on participants' well-being, performance, and intention to participate. In Study 1, structural equation modeling favored the hypothesized motivational model, in which, after controlling for pretask perceived competence and competence valuation, feedback positively predicted competence satisfaction, which in turn predicted higher levels of vitality and greater intentions to participate, through the mediation of autonomous motivation. No effects on performance were found. Study 2 further showed that autonomous motivation mediated the relation between competence satisfaction and well-being, whereas a motivation mediated the negative relation between competence satisfaction and ill-being and rated performance. The discussion focuses on the motivational role of competence feedback in sports and physical education settings.

  12. A position-dependent mass model for the Thomas–Fermi potential: Exact solvability and relation to δ-doped semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Schulze-Halberg, Axel, E-mail: xbataxel@gmail.com [Department of Mathematics and Actuarial Science, Indiana University Northwest, 3400 Broadway, Gary IN 46408 (United States); García-Ravelo, Jesús; Pacheco-García, Christian [Escuela Superior de Física y Matemáticas, Instituto Politécnico Nacional, Unidad Profesional Adolfo López Mateos, Zacatenco, 07738 México D.F. (Mexico); Juan Peña Gil, José [Universidad Autónoma Metropolitana - Azcapotzalco, CBI - Area de Física Atómica Molecular Aplicada, Av. San Pablo 180, Reynosa Azcapotzalco, 02200 México D.F. (Mexico)

    2013-06-15

    We consider the Schrödinger equation in the Thomas–Fermi field, a model that has been used for describing electron systems in δ-doped semiconductors. It is shown that the problem becomes exactly-solvable if a particular effective (position-dependent) mass distribution is incorporated. Orthogonal sets of normalizable bound state solutions are constructed in explicit form, and the associated energies are determined. We compare our results with the corresponding findings on the constant-mass problem discussed by Ioriatti (1990) [13]. -- Highlights: ► We introduce an exactly solvable, position-dependent mass model for the Thomas–Fermi potential. ► Orthogonal sets of solutions to our model are constructed in closed form. ► Relation to delta-doped semiconductors is discussed. ► Explicit subband bottom energies are calculated and compared to results obtained in a previous study.

  13. A position-dependent mass model for the Thomas–Fermi potential: Exact solvability and relation to δ-doped semiconductors

    International Nuclear Information System (INIS)

    Schulze-Halberg, Axel; García-Ravelo, Jesús; Pacheco-García, Christian; Juan Peña Gil, José

    2013-01-01

    We consider the Schrödinger equation in the Thomas–Fermi field, a model that has been used for describing electron systems in δ-doped semiconductors. It is shown that the problem becomes exactly-solvable if a particular effective (position-dependent) mass distribution is incorporated. Orthogonal sets of normalizable bound state solutions are constructed in explicit form, and the associated energies are determined. We compare our results with the corresponding findings on the constant-mass problem discussed by Ioriatti (1990) [13]. -- Highlights: ► We introduce an exactly solvable, position-dependent mass model for the Thomas–Fermi potential. ► Orthogonal sets of solutions to our model are constructed in closed form. ► Relation to delta-doped semiconductors is discussed. ► Explicit subband bottom energies are calculated and compared to results obtained in a previous study

  14. SU-G-BRC-13: Model Based Classification for Optimal Position Selection for Left-Sided Breast Radiotherapy: Free Breathing, DIBH, Or Prone

    Energy Technology Data Exchange (ETDEWEB)

    Lin, H; Liu, T; Xu, X [Rensselaer Polytechnic Institute, Troy, NY (United States); Shi, C [Saint Vincent Medical Center, Bridgeport, CT (United States); Petillion, S; Kindts, I [University Hospitals Leuven, Leuven, Vlaams-Brabant (Belgium); Tang, X [Memorial Sloan Kettering Cancer Center, West Harrison, NY (United States)

    2016-06-15

    Purpose: There are clinical decision challenges to select optimal treatment positions for left-sided breast cancer patients—supine free breathing (FB), supine Deep Inspiration Breath Hold (DIBH) and prone free breathing (prone). Physicians often make the decision based on experiences and trials, which might not always result optimal OAR doses. We herein propose a mathematical model to predict the lowest OAR doses among these three positions, providing a quantitative tool for corresponding clinical decision. Methods: Patients were scanned in FB, DIBH, and prone positions under an IRB approved protocol. Tangential beam plans were generated for each position, and OAR doses were calculated. The position with least OAR doses is defined as the optimal position. The following features were extracted from each scan to build the model: heart, ipsilateral lung, breast volume, in-field heart, ipsilateral lung volume, distance between heart and target, laterality of heart, and dose to heart and ipsilateral lung. Principal Components Analysis (PCA) was applied to remove the co-linearity of the input data and also to lower the data dimensionality. Feature selection, another method to reduce dimensionality, was applied as a comparison. Support Vector Machine (SVM) was then used for classification. Thirtyseven patient data were acquired; up to now, five patient plans were available. K-fold cross validation was used to validate the accuracy of the classifier model with small training size. Results: The classification results and K-fold cross validation demonstrated the model is capable of predicting the optimal position for patients. The accuracy of K-fold cross validations has reached 80%. Compared to PCA, feature selection allows causal features of dose to be determined. This provides more clinical insights. Conclusion: The proposed classification system appeared to be feasible. We are generating plans for the rest of the 37 patient images, and more statistically significant

  15. Effects of positive end-expiratory pressure and recruitment maneuvers in a ventilator-induced injury mouse model.

    Directory of Open Access Journals (Sweden)

    Laura A Cagle

    Full Text Available Positive-pressure mechanical ventilation is an essential therapeutic intervention, yet it causes the clinical syndrome known as ventilator-induced lung injury. Various lung protective mechanical ventilation strategies have attempted to reduce or prevent ventilator-induced lung injury but few modalities have proven effective. A model that isolates the contribution of mechanical ventilation on the development of acute lung injury is needed to better understand biologic mechanisms that lead to ventilator-induced lung injury.To evaluate the effects of positive end-expiratory pressure and recruitment maneuvers in reducing lung injury in a ventilator-induced lung injury murine model in short- and longer-term ventilation.5-12 week-old female BALB/c mice (n = 85 were anesthetized, placed on mechanical ventilation for either 2 hrs or 4 hrs with either low tidal volume (8 ml/kg or high tidal volume (15 ml/kg with or without positive end-expiratory pressure and recruitment maneuvers.Alteration of the alveolar-capillary barrier was noted at 2 hrs of high tidal volume ventilation. Standardized histology scores, influx of bronchoalveolar lavage albumin, proinflammatory cytokines, and absolute neutrophils were significantly higher in the high-tidal volume ventilation group at 4 hours of ventilation. Application of positive end-expiratory pressure resulted in significantly decreased standardized histology scores and bronchoalveolar absolute neutrophil counts at low- and high-tidal volume ventilation, respectively. Recruitment maneuvers were essential to maintain pulmonary compliance at both 2 and 4 hrs of ventilation.Signs of ventilator-induced lung injury are evident soon after high tidal volume ventilation (as early as 2 hours and lung injury worsens with longer-term ventilation (4 hrs. Application of positive end-expiratory pressure and recruitment maneuvers are protective against worsening VILI across all time points. Dynamic compliance can be used guide

  16. Effects of positive end-expiratory pressure and recruitment maneuvers in a ventilator-induced injury mouse model

    Science.gov (United States)

    Franzi, Lisa M.; Linderholm, Angela L.; Last, Jerold A.; Adams, Jason Y.; Harper, Richart W.

    2017-01-01

    Background Positive-pressure mechanical ventilation is an essential therapeutic intervention, yet it causes the clinical syndrome known as ventilator-induced lung injury. Various lung protective mechanical ventilation strategies have attempted to reduce or prevent ventilator-induced lung injury but few modalities have proven effective. A model that isolates the contribution of mechanical ventilation on the development of acute lung injury is needed to better understand biologic mechanisms that lead to ventilator-induced lung injury. Objectives To evaluate the effects of positive end-expiratory pressure and recruitment maneuvers in reducing lung injury in a ventilator-induced lung injury murine model in short- and longer-term ventilation. Methods 5–12 week-old female BALB/c mice (n = 85) were anesthetized, placed on mechanical ventilation for either 2 hrs or 4 hrs with either low tidal volume (8 ml/kg) or high tidal volume (15 ml/kg) with or without positive end-expiratory pressure and recruitment maneuvers. Results Alteration of the alveolar-capillary barrier was noted at 2 hrs of high tidal volume ventilation. Standardized histology scores, influx of bronchoalveolar lavage albumin, proinflammatory cytokines, and absolute neutrophils were significantly higher in the high-tidal volume ventilation group at 4 hours of ventilation. Application of positive end-expiratory pressure resulted in significantly decreased standardized histology scores and bronchoalveolar absolute neutrophil counts at low- and high-tidal volume ventilation, respectively. Recruitment maneuvers were essential to maintain pulmonary compliance at both 2 and 4 hrs of ventilation. Conclusions Signs of ventilator-induced lung injury are evident soon after high tidal volume ventilation (as early as 2 hours) and lung injury worsens with longer-term ventilation (4 hrs). Application of positive end-expiratory pressure and recruitment maneuvers are protective against worsening VILI across all time points

  17. Effects of positive end-expiratory pressure and recruitment maneuvers in a ventilator-induced injury mouse model.

    Science.gov (United States)

    Cagle, Laura A; Franzi, Lisa M; Linderholm, Angela L; Last, Jerold A; Adams, Jason Y; Harper, Richart W; Kenyon, Nicholas J

    2017-01-01

    Positive-pressure mechanical ventilation is an essential therapeutic intervention, yet it causes the clinical syndrome known as ventilator-induced lung injury. Various lung protective mechanical ventilation strategies have attempted to reduce or prevent ventilator-induced lung injury but few modalities have proven effective. A model that isolates the contribution of mechanical ventilation on the development of acute lung injury is needed to better understand biologic mechanisms that lead to ventilator-induced lung injury. To evaluate the effects of positive end-expiratory pressure and recruitment maneuvers in reducing lung injury in a ventilator-induced lung injury murine model in short- and longer-term ventilation. 5-12 week-old female BALB/c mice (n = 85) were anesthetized, placed on mechanical ventilation for either 2 hrs or 4 hrs with either low tidal volume (8 ml/kg) or high tidal volume (15 ml/kg) with or without positive end-expiratory pressure and recruitment maneuvers. Alteration of the alveolar-capillary barrier was noted at 2 hrs of high tidal volume ventilation. Standardized histology scores, influx of bronchoalveolar lavage albumin, proinflammatory cytokines, and absolute neutrophils were significantly higher in the high-tidal volume ventilation group at 4 hours of ventilation. Application of positive end-expiratory pressure resulted in significantly decreased standardized histology scores and bronchoalveolar absolute neutrophil counts at low- and high-tidal volume ventilation, respectively. Recruitment maneuvers were essential to maintain pulmonary compliance at both 2 and 4 hrs of ventilation. Signs of ventilator-induced lung injury are evident soon after high tidal volume ventilation (as early as 2 hours) and lung injury worsens with longer-term ventilation (4 hrs). Application of positive end-expiratory pressure and recruitment maneuvers are protective against worsening VILI across all time points. Dynamic compliance can be used guide the frequency

  18. Damping at positive frequencies in the limit J⊥-->0 in the strongly correlated Hubbard model

    Science.gov (United States)

    Mohan, Minette M.

    1992-08-01

    I show damping in the two-dimensional strongly correlated Hubbard model within the retraceable-path approximation, using an expansion around dominant poles for the self-energy. The damping half-width ~J2/3z occurs only at positive frequencies ω>5/2Jz, the excitation energy of a pure ``string'' state of length one, where Jz is the Ising part of the superexchange interaction, and occurs even in the absence of spin-flip terms ~J⊥ in contrast to other theoretical treatments. The dispersion relation for both damped and undamped peaks near the upper band edge is found and is shown to have lost the simple J2/3z dependence characteristic of the peaks near the lower band edge. The position of the first three peaks near the upper band edge agrees well with numerical simulations on the t-J model. The weight of the undamped peaks near the upper band edge is ~J4/3z, contrasting with Jz for the weight near the lower band edge.

  19. Reduction of false positives in the detection of architectural distortion in mammograms by using a geometrically constrained phase portrait model

    International Nuclear Information System (INIS)

    Ayres, Fabio J.; Rangayyan, Rangaraj M.

    2007-01-01

    Objective One of the commonly missed signs of breast cancer is architectural distortion. We have developed techniques for the detection of architectural distortion in mammograms, based on the analysis of oriented texture through the application of Gabor filters and a linear phase portrait model. In this paper, we propose constraining the shape of the general phase portrait model as a means to reduce the false-positive rate in the detection of architectural distortion. Material and methods The methods were tested with one set of 19 cases of architectural distortion and 41 normal mammograms, and with another set of 37 cases of architectural distortion. Results Sensitivity rates of 84% with 4.5 false positives per image and 81% with 10 false positives per image were obtained for the two sets of images. Conclusion The adoption of a constrained phase portrait model with a symmetric matrix and the incorporation of its condition number in the analysis resulted in a reduction in the false-positive rate in the detection of architectural distortion. The proposed techniques, dedicated for the detection and localization of architectural distortion, should lead to efficient detection of early signs of breast cancer. (orig.)

  20. A Positive Stigma for Child Labor?

    Science.gov (United States)

    Patrinos, Harry Anthony; Shafiq, M. Najeeb

    2008-01-01

    We introduce a simple empirical model that assumes a positive stigma (or norm) towards child labor that is common in some developing countries. We then illustrate our positive stigma model using data from Guatemala. Controlling for several child- and household-level characteristics, we use two instruments for measuring stigma: a child's indigenous…

  1. An Inquiry-Based Approach to Teaching the Spherical Earth Model to Preservice Teachers Using the Global Positioning System

    Science.gov (United States)

    Song, Youngjin; Schwenz, Richard

    2013-01-01

    This article describes an inquiry-based lesson to deepen preservice teachers' understanding of the spherical Earth model using the Global Positioning System. The lesson was designed with four learning goals: (1) to increase preservice teachers' conceptual knowledge of the spherical Earth model; (2) to develop preservice teachers'…

  2. Analysis of seasonal position variation for selected GNSS sites in Poland using loading modelling and GRACE data

    Directory of Open Access Journals (Sweden)

    Marcin Rajner

    2017-07-01

    Full Text Available In this study we compared weekly GNSS position time series with modelled values of crustal deformations on the basis of Gravity Recovery and Climate Experiment (GRACE data. The Global Navigation Satellite Systems (GNSS time series were taken from homogeneously reprocessed global network solutions within the International GNSS Service (IGS Reprocessing 1 project and from regional solutions performed by Warsaw University of Technology (WUT European Permanent Network (EPN Local Analysis Center (LAC within the EPN reprocessing project. Eight GNSS sites from the territory of Poland with observation timespans between 2.5 and 13 years were selected for this study. The Total Water Equivalent (TWE estimation from GRACE data was used to compute deformations using the Green's function formalism. High frequency components were removed from GRACE data to avoid aliasing problems. Since GRACE observes mainly the mass transport in continental storage of water, we also compared GRACE deformations and the GNSS position time series, with the deformations computed on the basis of a hydrosphere model. We used the output of Water GAP Hydrology Model (WGHM to compute deformations in the same manner as for the GRACE data. The WGHM gave slightly larger amplitudes than GNSS and GRACE. The atmospheric non-tidal loading effect was removed from GNSS position time series before comparing them with modelled deformations. The results confirmed that the major part of observed seasonal variations for GNSS vertical components can be attributed to the hydrosphere loading. The results for these components agree very well both in the amplitude and phase. The decrease in standard deviation of the residual GNSS position time series for vertical components corrected for the hydrosphere loading reached maximally 36% and occurred for all but one stations for both global and regional solutions. For horizontal components the amplitudes are about three times smaller than for vertical

  3. PET Motion Compensation for Radiation Therapy Using a CT-Based Mid-Position Motion Model: Methodology and Clinical Evaluation

    International Nuclear Information System (INIS)

    Kruis, Matthijs F.; Kamer, Jeroen B. van de; Houweling, Antonetta C.; Sonke, Jan-Jakob; Belderbos, José S.A.; Herk, Marcel van

    2013-01-01

    Purpose: Four-dimensional positron emission tomography (4D PET) imaging of the thorax produces sharper images with reduced motion artifacts. Current radiation therapy planning systems, however, do not facilitate 4D plan optimization. When images are acquired in a 2-minute time slot, the signal-to-noise ratio of each 4D frame is low, compromising image quality. The purpose of this study was to implement and evaluate the construction of mid-position 3D PET scans, with motion compensated using a 4D computed tomography (CT)-derived motion model. Methods and Materials: All voxels of 4D PET were registered to the time-averaged position by using a motion model derived from the 4D CT frames. After the registration the scans were summed, resulting in a motion-compensated 3D mid-position PET scan. The method was tested with a phantom dataset as well as data from 27 lung cancer patients. Results: PET motion compensation using a CT-based motion model improved image quality of both phantoms and patients in terms of increased maximum SUV (SUV max ) values and decreased apparent volumes. In homogenous phantom data, a strong relationship was found between the amplitude-to-diameter ratio and the effects of the method. In heterogeneous patient data, the effect correlated better with the motion amplitude. In case of large amplitudes, motion compensation may increase SUV max up to 25% and reduce the diameter of the 50% SUV max volume by 10%. Conclusions: 4D CT-based motion-compensated mid-position PET scans provide improved quantitative data in terms of uptake values and volumes at the time-averaged position, thereby facilitating more accurate radiation therapy treatment planning of pulmonary lesions

  4. Insights into Mechanistic Models for Evaporation of Organic Liquids in the Environment Obtained by Position-Specific Carbon Isotope Analysis.

    Science.gov (United States)

    Julien, Maxime; Nun, Pierrick; Robins, Richard J; Remaud, Gérald S; Parinet, Julien; Höhener, Patrick

    2015-11-03

    Position-specific isotope effects (PSIEs) have been measured by isotope ratio monitoring (13)C nuclear magnetic resonance spectrometry during the evaporation of 10 liquids of different polarities under 4 evaporation modes (passive evaporation, air-vented evaporation, low pressure evaporation, distillation). The observed effects are used to assess the validity of the Craig-Gordon isotope model for organic liquids. For seven liquids the overall isotope effect (IE) includes a vapor-liquid contribution that is strongly position-specific in polar compounds but less so in apolar compounds and a diffusive IE that is not position-specific, except in the alcohols, ethanol and propan-1-ol. The diffusive IE is diminished under forced evaporation. The position-specific isotope pattern created by liquid-vapor IEs is manifest in five liquids, which have an air-side limitation for volatilization. For the alcohols, undefined processes in the liquid phase create additional PSIEs. Three other liquids with limitations on the liquid side have a lower, highly position-specific, bulk diffusive IE. It is concluded that evaporation of organic pollutants creates unique position-specific isotope patterns that may be used to assess the progress of remediation or natural attenuation of pollution and that the Craig-Gordon isotope model is valid for the volatilization of nonpolar organic liquids with air-side limitation of the volatilization rate.

  5. Positive Psychological Interventions for Patients with Type 2 Diabetes: Rationale, Theoretical Model, and Intervention Development

    Directory of Open Access Journals (Sweden)

    Jeff C. Huffman

    2015-01-01

    Full Text Available Most patients with type 2 diabetes (T2D have suboptimal adherence to recommended diet, physical activity, and/or medication. Current approaches to improve health behaviors in T2D have been variably effective, and successful interventions are often complex and intensive. It is therefore vital to develop interventions that are simple, well-accepted, and applicable to a wide range of patients who suffer from T2D. One approach may be to boost positive psychological states, such as positive affect or optimism, as these constructs have been prospectively and independently linked to improvements in health behaviors. Positive psychology (PP interventions, which utilize systematic exercises to increase optimism, well-being, and positive affect, consistently increase positive states and are easily delivered to patients with chronic illnesses. However, to our knowledge, PP interventions have not been formally tested in T2D. In this paper, we review a theoretical model for the use of PP interventions to target health behaviors in T2D, describe the structure and content of a PP intervention for T2D patients, and describe baseline data from a single-arm proof-of-concept (N=15 intervention study in T2D patients with or without depression. We also discuss how PP interventions could be combined with motivational interviewing (MI interventions to provide a blended psychological-behavioral approach.

  6. Applying the Nominal Response Model within a Longitudinal Framework to Construct the Positive Family Relationships Scale

    Science.gov (United States)

    Preston, Kathleen Suzanne Johnson; Parral, Skye N.; Gottfried, Allen W.; Oliver, Pamella H.; Gottfried, Adele Eskeles; Ibrahim, Sirena M.; Delany, Danielle

    2015-01-01

    A psychometric analysis was conducted using the nominal response model under the item response theory framework to construct the Positive Family Relationships scale. Using data from the Fullerton Longitudinal Study, this scale was constructed within a long-term longitudinal framework spanning middle childhood through adolescence. Items tapping…

  7. A positive stigma for child labor ?

    OpenAIRE

    Patrinos, Harry Anthony; Shafiq, M. Najeeb

    2008-01-01

    The authors introduce a simple empirical model that assumes a positive stigma (or norm) toward child labor that is common in some developing countries. They illustrate the positive stigma model using data from Guatemala. Controlling for several child and household-level characteristics, the analysis uses two instruments for measuring stigma: a child's indigenous background and the househol...

  8. Positive dynamical systems in discrete time theory, models, and applications

    CERN Document Server

    Krause, Ulrich

    2015-01-01

    This book provides a systematic, rigorous and self-contained treatment of positive dynamical systems. A dynamical system is positive when all relevant variables of a systemare nonnegative in a natural way. This is in biology, demography or economics, where the levels of populations or prices of goods are positive. The principle also finds application in electrical engineering, physics and computer sciences.

  9. Development of a geometric uncertainty model describing the accuracy of position-sensitive, coincidence neutron detection

    Energy Technology Data Exchange (ETDEWEB)

    Trivelpiece, Cory L., E-mail: cory@psu.ed [Department of Mechanical and Nuclear Engineering, The Pennsylvania, State University, University Park, PA 16802 (United States); Brenizer, J.S. [Department of Mechanical and Nuclear Engineering, The Pennsylvania, State University, University Park, PA 16802 (United States)

    2011-01-01

    A diameter of uncertainty (D{sub u}) was derived from a geometric uncertainty model describing the error that would be introduced into position-sensitive, coincidence neutron detection measurements by charged-particle transport phenomena and experimental setup. The transport of {alpha} and Li ions, produced by the {sup 10}B(n,{alpha}) {sup 7}Li reaction, through free-standing boro-phosphosilicate glass (BPSG) films was modeled using the Monte Carlo code SRIM, and the results of these simulations were used as input to determine D{sub u} for position-sensitive, coincidence techniques. The results of these calculations showed that D{sub u} is dependent on encoder separation, the angle of charged particle emission, and film thickness. For certain emission scenarios, the magnitude of D{sub u} is larger than the physical size of the neutron converting media that were being modeled. Spheres of uncertainty were developed that describe the difference in flight path times among the bounding-case emission scenarios that were considered in this work. It was shown the overlapping spheres represent emission angles and particle flight path lengths that would be difficult to resolve in terms of particle time-of-flight measurements. However, based on the timing resolution of current nuclear instrumentation, emission events that yield large D{sub u} can be discriminated by logical arguments during spectral deconvolution.

  10. Psychological resilience, pain catastrophizing, and positive emotions: perspectives on comprehensive modeling of individual pain adaptation.

    Science.gov (United States)

    Sturgeon, John A; Zautra, Alex J

    2013-03-01

    Pain is a complex construct that contributes to profound physical and psychological dysfunction, particularly in individuals coping with chronic pain. The current paper builds upon previous research, describes a balanced conceptual model that integrates aspects of both psychological vulnerability and resilience to pain, and reviews protective and exacerbating psychosocial factors to the process of adaptation to chronic pain, including pain catastrophizing, pain acceptance, and positive psychological resources predictive of enhanced pain coping. The current paper identifies future directions for research that will further enrich the understanding of pain adaptation and espouses an approach that will enhance the ecological validity of psychological pain coping models, including introduction of advanced statistical and conceptual models that integrate behavioral, cognitive, information processing, motivational and affective theories of pain.

  11. Risk model in stage IB1-IIB cervical cancer with positive node after radical hysterectomy

    Directory of Open Access Journals (Sweden)

    Chen Z

    2016-05-01

    Full Text Available Zhilan Chen,1,2,* Kecheng Huang,1,* Zhiyong Lu,1,3 Song Deng,1,4 Jiaqiang Xiong,1 Jia Huang,1 Xiong Li,5 Fangxu Tang,1 Zhihao Wang,6 Haiying Sun,1 Lin Wang,1 Shasha Zhou,1 Xiaoli Wang,1 Yao Jia,1 Ting Hu,1 Juan Gui,7 Dongyi Wan,1 Ding Ma,1 Shuang Li,1 Shixuan Wang11Department of Obstetrics and Gynecology, Tongji Hospital, Tongji Medical College, Huazhong University of Science and Techonology, Wuhan, 2Department of Obstetrics and Gynecology, Wuhan General Hospital of Guangzhou Military Command, Wuhan, 3Hubei Key Laboratory of Embryonic Stem Cell Research, Tai-He Hospital, Hubei University of Medicine, Shiyan, Hubei, 4Department of Obstetrics and Gynecology, University Hospital of Hubei University for Nationalities, Enshi, Hubei, 5Department of Obstetrics and Gynecology, Wuhan Central Hospital, Wuhan, 6Department of Pathology and Pathophysiology, Key Laboratory of Ministry of Education of China for Neurological Disorders, Huazhong University of Science and Techonology, Wuhan, 7Department of Obstetrics and Gynecology, Renmin Hospital, Wuhan University, Wuhan, People’s Republic of China*These authors contributed equally to this workAbstract: The purpose of this study was to identify risk factors in patients with surgically treated node-positive IB1-IIB cervical cancer and to establish a risk model for disease-free survival (DFS and overall survival (OS. A total of 170 patients who underwent radical hysterectomy and bilateral pelvic lymphadenectomy as primary treatment for node-positive International Federation of Gynaecology and Obstetrics (FIGO stage IB1-IIB cervical cancer from January 2002 to December 2008 were retrospectively analyzed. Five published risk models were evaluated in this population. The variables, including common iliac lymph node metastasis and parametrial invasion, were independent predictors of outcome in a multivariate analysis using a Cox regression model. Three distinct prognostic groups (low, intermediate, and high risk

  12. Geometrical modeling of a two-dimensional sensor array for determining spatial position of a passive object

    DEFF Research Database (Denmark)

    Harbo, Anders La-Cour

    2004-01-01

    This paper presents a model of an active sensor array which can determine the spatial position of a passive object by illuminating the object via a small set of emitters and measure the intensity of the reflection by means of a small set of receivers. All emitters and receivers are located...

  13. Testing the Bivalent Fear of Evaluation Model of Social Anxiety: The Relationship between Fear of Positive Evaluation, Social Anxiety, and Perfectionism.

    Science.gov (United States)

    Yap, Keong; Gibbs, Amy L; Francis, Andrew J P; Schuster, Sharynn E

    2016-01-01

    The Bivalent Fear of Evaluation (BFOE) model of social anxiety proposes that fear of negative evaluation (FNE) and fear of positive evaluation (FPE) play distinct roles in social anxiety. Research is however lacking in terms of how FPE is related to perfectionism and how these constructs interact to predict social anxiety. Participants were 382 individuals from the general community and included an oversampling of individuals with social anxiety. Measures of FPE, FNE, perfectionism, and social anxiety were administered. Results were mostly consistent with the predictions made by the BFOE model and showed that accounting for confounding variables, FPE correlated negatively with high standards but positively with maladaptive perfectionism. FNE was also positively correlated with maladaptive perfectionism, but there was no significant relationship between FNE and high standards. Also consistent with BFOE model, both FNE and FPE significantly moderated the relationship between maladaptive perfectionism and social anxiety with the relationship strengthened at high levels of FPE and FNE. These findings provide additional support for the BFOE model and implications are discussed.

  14. Risk analysis of Leksell Gamma Knife Model C with automatic positioning system

    International Nuclear Information System (INIS)

    Goetsch, Steven J.

    2002-01-01

    Purpose: This study was conducted to evaluate the decrease in risk from misadministration of the new Leksell Gamma Knife Model C with Automatic Positioning System compared with previous models. Methods and Materials: Elekta Instruments, A.B. of Stockholm has introduced a new computer-controlled Leksell Gamma Knife Model C which uses motor-driven trunnions to reposition the patient between isocenters (shots) without human intervention. Previous models required the operators to manually set coordinates from a printed list, permitting opportunities for coordinate transposition, incorrect helmet size, incorrect treatment times, missing shots, or repeated shots. Results: A risk analysis was conducted between craniotomy involving hospital admission and outpatient Gamma Knife radiosurgery. A report of the Institute of Medicine of the National Academies dated November 29, 1999 estimated that medical errors kill between 44,000 and 98,000 people each year in the United States. Another report from the National Nosocomial Infections Surveillance System estimates that 2.1 million nosocomial infections occur annually in the United States in acute care hospitals alone, with 31 million total admissions. Conclusions: All medical procedures have attendant risks of morbidity and possibly mortality. Each patient should be counseled as to the risk of adverse effects as well as the likelihood of good results for alternative treatment strategies. This paper seeks to fill a gap in the existing medical literature, which has a paucity of data involving risk estimates for stereotactic radiosurgery

  15. On stochastic modeling of the modernized global positioning system (GPS) L2C signal

    International Nuclear Information System (INIS)

    Elsobeiey, Mohamed; El-Rabbany, Ahmed

    2010-01-01

    In order to take full advantage of the modernized GPS L2C signal, it is essential that its stochastic characteristics and code bias be rigorously determined. In this paper, long sessions of GPS measurements are used to study the stochastic characteristics of the modernized GPS L2C signal. As a byproduct, the stochastic characteristics of the legacy GPS signals, namely C/A and P2 codes, are also determined, which are used to verify the developed stochastic model of the modernized signal. The differential code biases between P2 and C2, DCB P2-C2 , are also estimated using the Bernese GPS software. It is shown that the developed models improved the precise point positioning (PPP) solution and convergence time

  16. Navigation studies based on the ubiquitous positioning technologies

    Science.gov (United States)

    Ye, Lei; Mi, Weijie; Wang, Defeng

    2007-11-01

    This paper summarized the nowadays positioning technologies, such as absolute positioning methods and relative positioning methods, indoor positioning and outdoor positioning, active positioning and passive positioning. Global Navigation Satellite System (GNSS) technologies were introduced as the omnipresent out-door positioning technologies, including GPS, GLONASS, Galileo and BD-1/2. After analysis of the shortcomings of GNSS, indoor positioning technologies were discussed and compared, including A-GPS, Cellular network, Infrared, Electromagnetism, Computer Vision Cognition, Embedded Pressure Sensor, Ultrasonic, RFID (Radio Frequency IDentification), Bluetooth, WLAN etc.. Then the concept and characteristics of Ubiquitous Positioning was proposed. After the ubiquitous positioning technologies contrast and selection followed by system engineering methodology, a navigation system model based on Incorporate Indoor-Outdoor Positioning Solution was proposed. And this model was simulated in the Galileo Demonstration for World Expo Shanghai project. In the conclusion, the prospects of ubiquitous positioning based navigation were shown, especially to satisfy the public location information acquiring requirement.

  17. An education model of a nano-positioning system for mechanical engineers

    International Nuclear Information System (INIS)

    Lee, Dong Yeon; Gweon, Dae Gab

    2006-01-01

    The increasing use of nano-positioners in a wide variety of laboratory and industrial applications has created a need for nano-mechatronics education in all engineering disciplines. The subject of nano-mechatronics is broad and interdisciplinary. This article focuses on the way nano-mechatronics is taught in department of mechanical engineering at Korea Advanced Institute of Science and Technology (KAIST). As one model of nano-positioning systems, design and experimental methodology is presented in this article. For design phase, the stiffness and resonant frequencies are found analytically and verified by using a commercial finite element analysis program. Next, for experimental phase, various tests are performed to access the performances of the designed nano-positioner, for example, sine-tracking, multi-step response and travel-range check etc. Finally, the definition of 'separation frequency' is described and some comments are discussed

  18. The Information and Motivation and Behavioral Skills Model of ART Adherence among HIV-Positive Adults in Mexico.

    Science.gov (United States)

    Santillán Torres Torija, Carolina; Villagrán Vázquez, Gabina; Robles Montijo, Silvia Susana; de Lourdes Eguiluz Romo, Luz

    2015-01-01

    Middle-income countries are in need of research that uses theoretical-based models to assess factors that predict adherence to antiretroviral therapy (ART) and help in the design, implementation, and evaluation of interventions for nonadherent populations. In Mexico, the Information and Motivation and Behavioral Skills (IMB) Model of ART Adherence constructs is useful in describing and predicting adherence behaviors in various samples but has not been articulated to people living with HIV (PLWH) on ART. The aim of this was to characterize the IMB core constructs and identify correlates of ART adherence in an HIV-positive clinic sample in Mexico. A convenience sample of 109 HIV-positive patients attending their monthly visits at a local public hospital were interviewed with the Spanish version of the LifeWindows IMB ART Adherence Questionnaire (LW-IMB-AAQ) as well as a sociodemographic questionnaire. All participants were recruited from a hospital-based outpatient clinical care site. Partial confirmation of the relationships proposed by the IMB Model of ART Adherence was found. As predicted by the model, only behavioral skills had direct association with all measures of self-reported adherence, and motivation was associated with behavioral skills. Information did not demonstrate significant relations to either motivation or behavioral skills, nor did it directly associate with adherence. Self-reported adherence did not associate with CD4 counts, nor did any of the IMB model core constructs. Applicability of the IMB Model of ART Adherence in this setting is discussed. The IMB Model of ART Adherence offered promise in this population and could help tailor population-specific interventions to promote high rates of ART adherence. © The Author(s) 2015.

  19. Increased airway reactivity in a neonatal mouse model of Continuous Positive Airway Pressure (CPAP)

    OpenAIRE

    Mayer, Catherine A.; Martin, Richard J.; MacFarlane, Peter M.

    2015-01-01

    Background Continuous positive airway pressure (CPAP) is a primary form of respiratory support used in the intensive care of preterm infants, but its long-term effects on airway (AW) function are unknown. Methods We developed a neonatal mouse model of CPAP treatment to determine whether it modifies later AW reactivity. Un-anesthetized spontaneously breathing mice were fitted with a mask to deliver CPAP (6cmH2O, 3hrs/day) for 7 consecutive days starting at postnatal day 1. Airway reactivity to...

  20. Role of muscle pulleys in producing eye position-dependence in the angular vestibuloocular reflex: a model-based study

    Science.gov (United States)

    Thurtell, M. J.; Kunin, M.; Raphan, T.; Wall, C. C. (Principal Investigator)

    2000-01-01

    It is well established that the head and eye velocity axes do not always align during compensatory vestibular slow phases. It has been shown that the eye velocity axis systematically tilts away from the head velocity axis in a manner that is dependent on eye-in-head position. The mechanisms responsible for producing these axis tilts are unclear. In this model-based study, we aimed to determine whether muscle pulleys could be involved in bringing about these phenomena. The model presented incorporates semicircular canals, central vestibular pathways, and an ocular motor plant with pulleys. The pulleys were modeled so that they brought about a rotation of the torque axes of the extraocular muscles that was a fraction of the angle of eye deviation from primary position. The degree to which the pulleys rotated the torque axes was altered by means of a pulley coefficient. Model input was head velocity and initial eye position data from passive and active yaw head impulses with fixation at 0 degrees, 20 degrees up and 20 degrees down, obtained from a previous experiment. The optimal pulley coefficient required to fit the data was determined by calculating the mean square error between data and model predictions of torsional eye velocity. For active head impulses, the optimal pulley coefficient varied considerably between subjects. The median optimal pulley coefficient was found to be 0.5, the pulley coefficient required for producing saccades that perfectly obey Listing's law when using a two-dimensional saccadic pulse signal. The model predicted the direction of the axis tilts observed in response to passive head impulses from 50 ms after onset. During passive head impulses, the median optimal pulley coefficient was found to be 0.21, when roll gain was fixed at 0.7. The model did not accurately predict the alignment of the eye and head velocity axes that was observed early in the response to passive head impulses. We found that this alignment could be well predicted if

  1. Modeling the Relationship between Trauma and Psychological Distress among HIV-Positive and HIV-Negative Women.

    Science.gov (United States)

    Brumsey, Ayesha Delany; Joseph, Nataria T; Myers, Hector F; Ullman, Jodie B; Wyatt, Gail E

    2013-01-01

    This study investigated the association between cumulative exposure to multiple traumatic events and psychological distress, as mediated by problematic substance use and impaired psychosocial resources. A sample of HIV-positive and HIV-negative women were assessed for a history of childhood and adult sexual abuse and non-sexual trauma as predictors of psychological distress (i.e., depression, non-specific anxiety, and posttraumatic stress), as mediated by problematic alcohol and drug use and psychosocial resources (i.e., social support, self-esteem and optimism). Structural equation modeling confirmed that cumulative trauma exposure is positively associated with greater psychological distress, and that this association is partially mediated through impaired psychosocial resources. However, although cumulative trauma was associated with greater problematic substance use, substance use did not mediate the relationship between trauma and psychological distress.

  2. Pneumatic Artificial Muscles Force Modelling and the Position and Stiffness Control on the Knee Joint of the Musculoskeletal Leg

    Directory of Open Access Journals (Sweden)

    Jingtao Lei

    2017-03-01

    Full Text Available Pneumatic artificial muscles (PAMs have properties similar to biological muscle and are widely used in robotics as actuators. A musculoskeletal leg mechanism driven by PAMs is presented in this paper. The joint stiffness of the musculoskeletal bionic leg for jumping movement needs to be analysed. The synchronous control on the position and stiffness of the joint is important to improve the flexibility of leg. The accurate force model of PAM is the foundation to achieving better control and dynamic jumping performance. The experimental platform of PAM is conducted, and the static equal pressure experiments are performed to obtain the PAM force model. According to the testing data, parameter identification method is adopted to determine the force model of PAM. A simulation on the position and stiffness control of the knee joint is performed, and the simulation results show the effectiveness of the presented method.

  3. Nano-Scale Positioning Design with Piezoelectric Materials

    Directory of Open Access Journals (Sweden)

    Yung Yue Chen

    2017-12-01

    Full Text Available Piezoelectric materials naturally possess high potential to deliver nano-scale positioning resolution; hence, they are adopted in a variety of engineering applications widely. Unfortunately, unacceptable positioning errors always appear because of the natural hysteresis effect of the piezoelectric materials. This natural property must be mitigated in practical applications. For solving this drawback, a nonlinear positioning design is proposed in this article. This nonlinear positioning design of piezoelectric materials is realized by the following four steps: 1. The famous Bouc–Wen model is utilized to present the input and output behaviors of piezoelectric materials; 2. System parameters of the Bouc–Wen model that describe the characteristics of piezoelectric materials are simultaneously identified with the particle swam optimization method; 3. Stability verification for the identified Bouc–Wen model; 4. A nonlinear feedback linearization control design is derived for the nano-scale positioning design of the piezoelectric material, mathematically. One important contribution of this investigation is that the positioning error between the output displacement of the controlled piezoelectric materials and the desired trajectory in nano-scale level can be proven to converge to zero asymptotically, under the effect of the hysteresis.

  4. Testing predictive models of positive and negative affect with psychosocial, acculturation, and coping variables in a multiethnic undergraduate sample

    OpenAIRE

    Kuo, Ben CH; Kwantes, Catherine T

    2014-01-01

    Despite the prevalence and popularity of research on positive and negative affect within the field of psychology, there is currently little research on affect involving the examination of cultural variables and with participants of diverse cultural and ethnic backgrounds. To the authors’ knowledge, currently no empirical studies have comprehensively examined predictive models of positive and negative affect based specifically on multiple psychosocial, acculturation, and coping variables as pr...

  5. A positive and multi-element conserving time stepping scheme for biogeochemical processes in marine ecosystem models

    Science.gov (United States)

    Radtke, H.; Burchard, H.

    2015-01-01

    In this paper, an unconditionally positive and multi-element conserving time stepping scheme for systems of non-linearly coupled ODE's is presented. These systems of ODE's are used to describe biogeochemical transformation processes in marine ecosystem models. The numerical scheme is a positive-definite modification of the Runge-Kutta method, it can have arbitrarily high order of accuracy and does not require time step adaption. If the scheme is combined with a modified Patankar-Runge-Kutta method from Burchard et al. (2003), it also gets the ability to solve a certain class of stiff numerical problems, but the accuracy is restricted to second-order then. The performance of the new scheme on two test case problems is shown.

  6. Plasma position control on Alcator C

    International Nuclear Information System (INIS)

    Pribyl, P.A.

    1981-05-01

    The Alcator C MHD equilibrium is investigated from the standpoint of determining the plasma position. A review of equilibrium theory is presented, indicating that the central flux surfaces of the plasma should be displaced about 1 to 2 cm from the outermost. Further, the plasma should have a slightly noncircular cross-section. A comparison is made between the observed and predicted profiles. Flux loops sensitive to plasma position generate the error signal for the feedback control circuit. This measurement agrees with other position-sensitive diagnostics, such as limiter heating, and centroids of density, soft x-ray, and electron cyclotron emission. A linear model is developed for the position control feedback system, including the vertical field SCR supply, plasma, and feedback electronics. Operation of the control system agrees well with that predicted by the model, with acceptable plasma position being maintained for the duration of the discharge. The feedback control system is in daily use for Alcator C runs

  7. Spatial pattern formation of coastal vegetation in response to external gradients and positive feedbacks affecting soil porewater salinity: A model study

    Science.gov (United States)

    Jiang, J.; DeAngelis, D.L.; Smith, T. J.; Teh, S.Y.; Koh, H. L.

    2012-01-01

    Coastal vegetation of South Florida typically comprises salinity-tolerant mangroves bordering salinity-intolerant hardwood hammocks and fresh water marshes. Two primary ecological factors appear to influence the maintenance of mangrove/hammock ecotones against changes that might occur due to disturbances. One of these is a gradient in one or more environmental factors. The other is the action of positive feedback mechanisms, in which each vegetation community influences its local environment to favor itself, reinforcing the boundary between communities. The relative contributions of these two factors, however, can be hard to discern. A spatially explicit individual-based model of vegetation, coupled with a model of soil hydrology and salinity dynamics is presented here to simulate mangrove/hammock ecotones in the coastal margin habitats of South Florida. The model simulation results indicate that an environmental gradient of salinity, caused by tidal flux, is the key factor separating vegetation communities, while positive feedback involving the different interaction of each vegetation type with the vadose zone salinity increases the sharpness of boundaries, and maintains the ecological resilience of mangrove/hammock ecotones against small disturbances. Investigation of effects of precipitation on positive feedback indicates that the dry season, with its low precipitation, is the period of strongest positive feedback. ?? 2011 Springer Science+Business Media B.V. (outside the USA).

  8. Design and Parametric Study of the Magnetic Sensor for Position Detection in Linear Motor Based on Nonlinear Parametric model order reduction.

    Science.gov (United States)

    Paul, Sarbajit; Chang, Junghwan

    2017-07-01

    This paper presents a design approach for a magnetic sensor module to detect mover position using the proper orthogonal decomposition-dynamic mode decomposition (POD-DMD)-based nonlinear parametric model order reduction (PMOR). The parameterization of the sensor module is achieved by using the multipolar moment matching method. Several geometric variables of the sensor module are considered while developing the parametric study. The operation of the sensor module is based on the principle of the airgap flux density distribution detection by the Hall Effect IC. Therefore, the design objective is to achieve a peak flux density (PFD) greater than 0.1 T and total harmonic distortion (THD) less than 3%. To fulfill the constraint conditions, the specifications for the sensor module is achieved by using POD-DMD based reduced model. The POD-DMD based reduced model provides a platform to analyze the high number of design models very fast, with less computational burden. Finally, with the final specifications, the experimental prototype is designed and tested. Two different modes, 90° and 120° modes respectively are used to obtain the position information of the linear motor mover. The position information thus obtained are compared with that of the linear scale data, used as a reference signal. The position information obtained using the 120° mode has a standard deviation of 0.10 mm from the reference linear scale signal, whereas the 90° mode position signal shows a deviation of 0.23 mm from the reference. The deviation in the output arises due to the mechanical tolerances introduced into the specification during the manufacturing process. This provides a scope for coupling the reliability based design optimization in the design process as a future extension.

  9. Identification of Dynamically Positioned Ships

    Directory of Open Access Journals (Sweden)

    Thor I. Fossen

    1996-04-01

    Full Text Available Todays model-based dynamic positioning (DP systems require that the ship and thruster dynamics are known with some accuracy in order to use linear quadratic optical control theory. However, it is difficult to identify the mathematical model of a dynamically posititmed (DP ship since the ship is not persistently excited under DP. In addition the ship parameter estimation problem is nonlinear and multivariable with only position and thruster state measurements available for parameter estimation. The process and measurement noise must also be modeled in order to avoid parameter drift due to environmental disturbances and sensor failure. This article discusses an off-line parallel extended Kalman filter (EKF algorithm utilizing two measurement series in parallel to estimate the parameters in the DP ship model. Full-scale experiments with a supply vessel are used to demonstrate the convergence and robustness of the proposed parameter estimator.

  10. Supporting Seamful Development of Positioning Applications through Model Based Translucent Middleware

    DEFF Research Database (Denmark)

    Jensen, Jakob Langdal

    middleware, and how that middleware can provide developers with methods for controlling application qualities that are related to the positioning process. One key challenge is to understand how to support application development in a heterogeneous domain like that of positioning. Recent trends in application...... middleware used to support application development. We transfer the concept of tactics from the field of software architecture and apply it to specific qualities related to position based applications. We further argue that many of these tactics can be implemented as policies that can be enforced......Positioning technologies are becoming ever more pervasive, and they are used for a growing number of applications in a broad range of fields. We aim to support software developers who create position based applications. More specifically, how support can be provided through the use of specialized...

  11. Indoor positioning using differential Wi-Fi lateration

    Science.gov (United States)

    Retscher, Guenther; Tatschl, Thomas

    2017-12-01

    For Wi-Fi positioning usually location fingerprinting or (tri)lateration are employed whereby the received signal strengths (RSSs) of the surrounding Wi-Fi Access Points (APs) are scanned on the mobile devices and used to perform localization. Within the scope of this study, the position of a mobile user is determined on the basis of lateration. Two new differential approaches are developed and compared to two common models, i.e., the one-slope and multi-wall model, for the conversion of the measured RSS of the Wi-Fi signals into ranges. The two novel methods are termed DWi-Fi as they are derived either from the well-known DGPS or VLBI positioning principles. They make use of a network of reference stations deployed in the area of interest. From continuous RSS observations on these reference stations correction parameters are derived and applied by the user in real-time. This approach leads to a reduced influence of temporal and spatial variations and various propagation effects on the positioning result. In practical use cases conducted in a multi-storey office building with three different smartphones, it is proven that the two DWi-Fi approaches outperform the common models as static positioning yielded to position errors of about 5 m in average under good spatial conditions.

  12. Toward an Optimal Position for IVC Filters: Computational Modeling of the Impact of Renal Vein Inflow

    Energy Technology Data Exchange (ETDEWEB)

    Wang, S L; Singer, M A

    2009-07-13

    The purpose of this report is to evaluate the hemodynamic effects of renal vein inflow and filter position on unoccluded and partially occluded IVC filters using three-dimensional computational fluid dynamics. Three-dimensional models of the TrapEase and Gunther Celect IVC filters, spherical thrombi, and an IVC with renal veins were constructed. Hemodynamics of steady-state flow was examined for unoccluded and partially occluded TrapEase and Gunther Celect IVC filters in varying proximity to the renal veins. Flow past the unoccluded filters demonstrated minimal disruption. Natural regions of stagnant/recirculating flow in the IVC are observed superior to the bilateral renal vein inflows, and high flow velocities and elevated shear stresses are observed in the vicinity of renal inflow. Spherical thrombi induce stagnant and/or recirculating flow downstream of the thrombus. Placement of the TrapEase filter in the suprarenal vein position resulted in a large area of low shear stress/stagnant flow within the filter just downstream of thrombus trapped in the upstream trapping position. Filter position with respect to renal vein inflow influences the hemodynamics of filter trapping. Placement of the TrapEase filter in a suprarenal location may be thrombogenic with redundant areas of stagnant/recirculating flow and low shear stress along the caval wall due to the upstream trapping position and the naturally occurring region of stagnant flow from the renal veins. Infrarenal vein placement of IVC filters in a near juxtarenal position with the downstream cone near the renal vein inflow likely confers increased levels of mechanical lysis of trapped thrombi due to increased shear stress from renal vein inflow.

  13. Subcellular localization for Gram positive and Gram negative bacterial proteins using linear interpolation smoothing model.

    Science.gov (United States)

    Saini, Harsh; Raicar, Gaurav; Dehzangi, Abdollah; Lal, Sunil; Sharma, Alok

    2015-12-07

    Protein subcellular localization is an important topic in proteomics since it is related to a protein׳s overall function, helps in the understanding of metabolic pathways, and in drug design and discovery. In this paper, a basic approximation technique from natural language processing called the linear interpolation smoothing model is applied for predicting protein subcellular localizations. The proposed approach extracts features from syntactical information in protein sequences to build probabilistic profiles using dependency models, which are used in linear interpolation to determine how likely is a sequence to belong to a particular subcellular location. This technique builds a statistical model based on maximum likelihood. It is able to deal effectively with high dimensionality that hinders other traditional classifiers such as Support Vector Machines or k-Nearest Neighbours without sacrificing performance. This approach has been evaluated by predicting subcellular localizations of Gram positive and Gram negative bacterial proteins. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. Toward an individualized target motion management for IMRT of cervical cancer based on model-predicted cervix-uterus shape and position

    International Nuclear Information System (INIS)

    Bondar, Luiza; Hoogeman, Mischa; Mens, Jan Willem; Dhawtal, Glenn; Pree, Ilse de; Ahmad, Rozilawati; Quint, Sandra; Heijmen, Ben

    2011-01-01

    Background and Purpose: To design and evaluate a 3D patient-specific model to predict the cervix-uterus shape and position. Methods and Materials: For 13 patients lying in prone position, 10 variable bladder filling CT-scans were acquired, 5 at planning and 5 after 40 Gy. The delineated cervix-uterus volumes in 2-5 pre-treatment CT-scans were used to generate patient-specific models that predict the cervix-uterus geometry by bladder volume. Model predictions were compared to delineations, excluding those used for model construction. The prediction error was quantified by the margin required around the predicted volumes to accommodate 95% of the delineated volume and by the predicted-to-delineated surface distance. Results: The prediction margin was significantly smaller (average 50%) than the margin encompassing the cervix-uterus motion. The prediction margin could be decreased (from 7 to 5 mm at planning and from 10 to 8 mm after 40 Gy) by increasing (from 2 to 5) the number of CT-scans used for the model construction. Conclusion: For most patients, even with a model based on only two CT-scans, the prediction error was well below the margin encompassing the cervix-uterus motion. The described approach could be used to create prior to treatment, an individualized treatment strategy.

  15. Approximations to the electron energy distribution and positive column models for low-pressure discharge light sources

    International Nuclear Information System (INIS)

    Lister, G G; Sheverev, V A; Uhrlandt, D

    2002-01-01

    The applicability of 'fluid' models based on analytic approximations of the electron energy distribution function (EEDF) and of kinetic models for low-pressure discharge light sources is discussed. Traditionally, 'fluid' models of fluorescent lamps assume that the EEDF is Maxwellian up to the energy of the first excited state. It is shown that such an approach is sufficiently accurate in most cases of conventional as well as of 'highly loaded' fluorescent lamps. However, this assumption is strongly violated for many rare gas glow discharges for mercury free light sources. As an example, a neon dc discharge is studied. The densities of the four lowest excited states and the electric field have been measured. The experimental results can be fairly well reproduced by a kinetic positive column model. This article was scheduled to appear in issue 14 of J. Phys. D: Appl. Phys. To access this special issue please follow this link: http://stacks.iop.org/0022-3727/35/i=14/

  16. Positive Management Education: Creating Creative Minds, Passionate Hearts, and Kindred Spirits

    Science.gov (United States)

    Karakas, Fahri

    2011-01-01

    The goal of this article is to explore positive management education, a practice-based teaching and learning model centered on positive organizational scholarship. Six signs of transformation in organizations are presented: complexity, community, creativity, spirituality, flexibility, and positivity. A model for positive management education is…

  17. Positive end-expiratory pressure improves survival in a rodent model of cardiopulmonary resuscitation using high-dose epinephrine.

    LENUS (Irish Health Repository)

    McCaul, Conán

    2009-10-01

    Multiple interventions have been tested in models of cardiopulmonary resuscitation (CPR) to optimize drug use, chest compressions, and ventilation. None has studied the effects of positive end-expiratory pressure (PEEP) on outcome. We hypothesized that because PEEP can reverse pulmonary atelectasis, lower pulmonary vascular resistance, and potentially improve cardiac output, its use during CPR would increase survival.

  18. A Non-linear Model for Predicting Tip Position of a Pliable Robot Arm Segment Using Bending Sensor Data

    Directory of Open Access Journals (Sweden)

    Elizabeth I. SKLAR

    2016-04-01

    Full Text Available Using pliable materials for the construction of robot bodies presents new and interesting challenges for the robotics community. Within the EU project entitled STIFFness controllable Flexible & Learnable manipulator for surgical Operations (STIFF-FLOP, a bendable, segmented robot arm has been developed. The exterior of the arm is composed of a soft material (silicone, encasing an internal structure that contains air-chamber actuators and a variety of sensors for monitoring applied force, position and shape of the arm as it bends. Due to the physical characteristics of the arm, a proper model of robot kinematics and dynamics is difficult to infer from the sensor data. Here we propose a non-linear approach to predicting the robot arm posture, by training a feed-forward neural network with a structured series of pressures values applied to the arm's actuators. The model is developed across a set of seven different experiments. Because the STIFF-FLOP arm is intended for use in surgical procedures, traditional methods for position estimation (based on visual information or electromagnetic tracking will not be possible to implement. Thus the ability to estimate pose based on data from a custom fiber-optic bending sensor and accompanying model is a valuable contribution. Results are presented which demonstrate the utility of our non-linear modelling approach across a range of data collection procedures.

  19. Study of efficacy in a mercury-free flat discharge fluorescent lamp using a zero-dimensional positive column model

    CERN Document Server

    Shiga, T; Boeuf, J P; Mikoshiba, S

    2003-01-01

    A zero-dimensional model of the positive column in Ar/Ne/Xe gas mixtures has been developed to help understand the measured dependence of the efficacy on operating conditions in a mercury-free flat fluorescent lamp in a dielectric barrier geometry. The experimental conditions are such that the radiation from the discharge is homogeneous over most of the discharge voltage. The model uses as input the discharge current waveform from the experiments, and it yields the time variations of the mean electron energy and the species densities. From these quantities we calculate the number of vacuum ultraviolet (VUV) photons emitted by the xenon resonance atoms and excimers during one current pulse and the efficiency for generation of VUV radiation in the positive column, which are compared with the measured luminance and efficacy for various voltages, pulse intervals, and lamp sizes. Over the range of conditions studied, we find that most electrical energy dissipated in xenon excitation is converted to VUV radiation; ...

  20. Exploring and Adapting a Conceptual Model of Sexual Positioning Practices and Sexual Risk Among HIV-Negative Black Men Who Have Sex With Men.

    Science.gov (United States)

    Dangerfield, Derek T; Ober, Allison J; Smith, Laramie R; Shoptaw, Steven; Bluthenthal, Ricky N

    2018-02-21

    Estimates show a 50% lifetime human immunodeficiency virus (HIV) risk among Black men who have sex with men (BMSM) in the United States(U.S.). Studying the dynamics of sexual positioning practices among BMSM could provide insights into the disparities observed among U.S. groups of men who have sex with men (MSM). This study explored sexual positioning dynamics among HIV-negative BMSM and how they aligned with a theoretical model of sexual positioning and HIV/sexually transmitted infection (STI) risk among MSM. In-depth qualitative interviews were conducted with 29 HIV-negative BMSM between ages 25 and 35 in Los Angeles. Comments related to sexual behaviors were reviewed for relevance regarding oral or anal sexual positioning practices. Data presented represent the range of themes related to decision making regarding sexual positioning. Personal preference, partner attraction, HIV avoidance, and feeling obligated to practice partner preferences influenced sexual positioning. Drug use also affected decision making and was sometimes preferred in order to practice receptive anal intercourse. These variables build on the conceptual model of sexual positioning practices and sexual risk, and add understanding to the relationship between preferences, practices, and risk management. Future research on risk among HIV-negative BMSM should quantify the relative impact of personal preferences, partner attraction, partner type, compromise, and substance use on sexual positioning practices and risk.

  1. A different perspective: introducing positive criminology.

    Science.gov (United States)

    Ronel, Natti; Elisha, Ety

    2011-04-01

    Positive criminology is a new conceptual perspective of criminology, encompassing several theories and models. Positive criminology refers to a focus on individuals' encounters with forces and influences that are experienced as positive, which distance them from deviance and crime, whether by means of formal and informal therapy programs and interventions, such as self-help groups; through emphasis of positive social elements, such as exposure to goodness, social acceptance, and reintegrative shaming; or based on positive personal traits, such as resilience and coherence. The perspective of positive criminology broadens that of traditional criminology, which focuses mainly on understanding the factors and processes that lead individuals and groups to what is defined as deviant and criminal behavior. Positive criminology is implemented in treatment and rehabilitation of individuals and groups that have demonstrated deviant and criminal behavior, by emphasizing positive experiences that may potentially prevent or discourage continued criminal behavior. Positive criminology is also expressed in prevention based on a positive approach.

  2. Sensorless SPMSM Position Estimation Using Position Estimation Error Suppression Control and EKF in Wide Speed Range

    Directory of Open Access Journals (Sweden)

    Zhanshan Wang

    2014-01-01

    Full Text Available The control of a high performance alternative current (AC motor drive under sensorless operation needs the accurate estimation of rotor position. In this paper, one method of accurately estimating rotor position by using both motor complex number model based position estimation and position estimation error suppression proportion integral (PI controller is proposed for the sensorless control of the surface permanent magnet synchronous motor (SPMSM. In order to guarantee the accuracy of rotor position estimation in the flux-weakening region, one scheme of identifying the permanent magnet flux of SPMSM by extended Kalman filter (EKF is also proposed, which formed the effective combination method to realize the sensorless control of SPMSM with high accuracy. The simulation results demonstrated the validity and feasibility of the proposed position/speed estimation system.

  3. Commuter Train Passenger Safety Model Using Positive Behavior Approach: The Case Study in Suburban Area

    Science.gov (United States)

    Suryanto, D. A.; Adisasmita, S. A.; Hamid, S.; Hustim, M.

    2018-04-01

    Currently, Train passanger safety measures are more predominantly measurable using negative dimensions in user mode behavior, such as accident rate, accident intensity and accident impact. This condition suggests that safety improvements aim only to reduce accidents. Therefore, this study aims to measure the safety level of light train transit modes (KRL) through the dimensions of traveling safety on commuters based on positive safety indicators with severel condition departure times and returns for work purposes and long trip rates above KRL. The primary survey were used in data collection methods. Structural Equation Modeling (SEM) were used in data analysis. The results show that there are different models of the safety level of departure and return journey. The highest difference is in the security dimension which is the internal variable of KRL users.

  4. Testing predictive models of positive and negative affect with psychosocial, acculturation, and coping variables in a multiethnic undergraduate sample.

    Science.gov (United States)

    Kuo, Ben Ch; Kwantes, Catherine T

    2014-01-01

    Despite the prevalence and popularity of research on positive and negative affect within the field of psychology, there is currently little research on affect involving the examination of cultural variables and with participants of diverse cultural and ethnic backgrounds. To the authors' knowledge, currently no empirical studies have comprehensively examined predictive models of positive and negative affect based specifically on multiple psychosocial, acculturation, and coping variables as predictors with any sample populations. Therefore, the purpose of the present study was to test the predictive power of perceived stress, social support, bidirectional acculturation (i.e., Canadian acculturation and heritage acculturation), religious coping and cultural coping (i.e., collective, avoidance, and engagement coping) in explaining positive and negative affect in a multiethnic sample of 301 undergraduate students in Canada. Two hierarchal multiple regressions were conducted, one for each affect as the dependent variable, with the above described predictors. The results supported the hypotheses and showed the two overall models to be significant in predicting affect of both kinds. Specifically, a higher level of positive affect was predicted by a lower level of perceived stress, less use of religious coping, and more use of engagement coping in dealing with stress by the participants. Higher level of negative affect, however, was predicted by a higher level of perceived stress and more use of avoidance coping in responding to stress. The current findings highlight the value and relevance of empirically examining the stress-coping-adaptation experiences of diverse populations from an affective conceptual framework, particularly with the inclusion of positive affect. Implications and recommendations for advancing future research and theoretical works in this area are considered and presented.

  5. Device for positioning and generation of an element of track model and slice of the MELAS automatic equipment

    International Nuclear Information System (INIS)

    Kryutchenko, E.V.; Fedotov, V.S.

    1979-01-01

    The structure and organization of the device for positioning and generation of element of track model and slice of the MELAS automatic equipment which is developed for measuring films from big bubble chambers, is described. Main features of the device are studied and characteristics are given as well

  6. Change for the better: an innovative model of care delivering positive patient and workforce outcomes.

    Science.gov (United States)

    Cann, Tina; Gardner, Anne

    2012-01-01

    To evaluate patient and workforce outcomes following the implementation of the Practice Partnership Model of Care. Pre-test-post-test design. A 29-bed surgical ward at a tertiary-level regional hospital. Summary de-identified data from all patients and ward nursing staff in the study period. The Practice Partnership Model of Care has four main components: working in partnership; clinical handover at the bedside; comfort rounds; and environmental modifications. These reflect patient-centered and quality focused initiatives and use a total quality improvement framework that aims to transform care at the bedside. Patient outcomes: changes in patient safety (measured by numbers of medication errors and patient falls); satisfaction with care (use of the call bell system, number of complaints and compliments). Workforce outcomes: changes in staff satisfaction (measured through staff sick leave). A statistically significant reduction in use of nurse call bells (p=<0.001) post-implementation. Medication errors and patient falls reduced, with an overall reduction of 4% in staff sick leave. The Practice Partnership Model of Care positively affected patient and workforce outcomes, suggesting further exploration of this model in other hospital contexts is warranted.

  7. Introducing positive psychology to SLA

    Directory of Open Access Journals (Sweden)

    Sarah Mercer

    2014-01-01

    Full Text Available Positive psychology is a rapidly expanding subfield in psychology that has important implications for the field of second language acquisition (SLA. This paper introduces positive psychology to the study of language by describing its key tenets. The potential contributions of positive psychology are contextualized with reference to prior work, including the humanistic movement in language teaching, models of motivation, the concept of an affective filter, studies of the good language learner, and the concepts related to the self. There are reasons for both encouragement and caution as studies inspired by positive psychology are undertaken. Papers in this special issue of SSLLT cover a range of quantitative and qualitative methods with implications for theory, research, and teaching practice. The special issue serves as a springboard for future research in SLA under the umbrella of positive psychology.

  8. Critical Dynamics of the Xy-Model on the One-Dimensional Superlattice by Position Space Renormalization Group

    Science.gov (United States)

    Lima, J. P. De; Gonçalves, L. L.

    The critical dynamics of the isotropic XY-model on the one-dimensional superlattice is considered in the framework of the position space renormalization group theory. The decimation transformation is introduced by considering the equations of motion of the operators associated to the excitations of the system, and it corresponds to an extension of the procedure introduced by Stinchcombe and dos Santos (J. Phys. A18, L597 (1985)) for the homogeneous lattice. The dispersion relation is obtained exactly and the static and dynamic scaling forms are explicitly determined. The dynamic critical exponent is also obtained and it is shown that it is identical to the one of the XY-model on the homogeneous chain.

  9. Limitations in the use of Drosophila melanogaster as a model host for gram-positive bacterial infection

    DEFF Research Database (Denmark)

    Jensen, Rikke Lind; Pedersen, K.S.; Loeschcke, V

    2007-01-01

    resistance respectively, were subjected to infection by L. monocytogenes, S. aureus and E. coli. Mortality rates were comparable with that of the Oregon R strain. Conclusions: Use of the injection method shows the limitation of D. melanogaster as a model host for gram-positive bacteria as opportunistic......Aims: To examine sensitivities of various Drosophila melanogaster strains towards human pathogenic and nonpathogenic gram-positive bacteria. Methods and Results: The D. melanogaster Oregon R strain was infected by injecting the thorax with a needle containing Escherichia coli (negative control...... with the negative control. Infection with L. innocua, B. subtilis or C. maltaromaticum also resulted in a high fly mortality, whereas Lact. plantarum and P. acidilactici resulted in a slightly increased mortality. Four additional D. melanogaster lines, three of which had been selected for heat, cold and desiccation...

  10. Fluorescent optical position sensor

    Science.gov (United States)

    Weiss, Jonathan D.

    2005-11-15

    A fluorescent optical position sensor and method of operation. A small excitation source side-pumps a localized region of fluorescence at an unknown position along a fluorescent waveguide. As the fluorescent light travels down the waveguide, the intensity of fluorescent light decreases due to absorption. By measuring with one (or two) photodetectors the attenuated intensity of fluorescent light emitted from one (or both) ends of the waveguide, the position of the excitation source relative to the waveguide can be determined by comparing the measured light intensity to a calibrated response curve or mathematical model. Alternatively, excitation light can be pumped into an end of the waveguide, which generates an exponentially-decaying continuous source of fluorescent light along the length of the waveguide. The position of a photodetector oriented to view the side of the waveguide can be uniquely determined by measuring the intensity of the fluorescent light emitted radially at that location.

  11. Longitudinal Models of Socio-Economic Status: Impact on Positive Parenting Behaviors

    Science.gov (United States)

    Azad, Gazi; Blacher, Jan; Marcoulides, George

    2014-01-01

    Parenting research is frequently conducted without a thorough examination of socio-economic characteristics. In this study, longitudinal observations of positive parenting were conducted across six time points. Participants were 219 mothers of children with and without developmental delays. Mothers' positive parenting increased during early and…

  12. New models and online calculator for predicting non-sentinel lymph node status in sentinel lymph node positive breast cancer patients

    Directory of Open Access Journals (Sweden)

    Johnson Denise L

    2008-03-01

    Full Text Available Abstract Background Current practice is to perform a completion axillary lymph node dissection (ALND for breast cancer patients with tumor-involved sentinel lymph nodes (SLNs, although fewer than half will have non-sentinel node (NSLN metastasis. Our goal was to develop new models to quantify the risk of NSLN metastasis in SLN-positive patients and to compare predictive capabilities to another widely used model. Methods We constructed three models to predict NSLN status: recursive partitioning with receiver operating characteristic curves (RP-ROC, boosted Classification and Regression Trees (CART, and multivariate logistic regression (MLR informed by CART. Data were compiled from a multicenter Northern California and Oregon database of 784 patients who prospectively underwent SLN biopsy and completion ALND. We compared the predictive abilities of our best model and the Memorial Sloan-Kettering Breast Cancer Nomogram (Nomogram in our dataset and an independent dataset from Northwestern University. Results 285 patients had positive SLNs, of which 213 had known angiolymphatic invasion status and 171 had complete pathologic data including hormone receptor status. 264 (93% patients had limited SLN disease (micrometastasis, 70%, or isolated tumor cells, 23%. 101 (35% of all SLN-positive patients had tumor-involved NSLNs. Three variables (tumor size, angiolymphatic invasion, and SLN metastasis size predicted risk in all our models. RP-ROC and boosted CART stratified patients into four risk levels. MLR informed by CART was most accurate. Using two composite predictors calculated from three variables, MLR informed by CART was more accurate than the Nomogram computed using eight predictors. In our dataset, area under ROC curve (AUC was 0.83/0.85 for MLR (n = 213/n = 171 and 0.77 for Nomogram (n = 171. When applied to an independent dataset (n = 77, AUC was 0.74 for our model and 0.62 for Nomogram. The composite predictors in our model were the product of

  13. Memory for Chess Positions: Resistance to Interference

    Science.gov (United States)

    Charness, Neil

    1976-01-01

    An information processing model, Memory-Aided Pattern Perceiver (MAPP), that simulates the recall of briefly presented chess positions, was subjected to a test of its assumption that such positions are encoded and stored as chunks in short-term memory. (Editor)

  14. Penerapan Model Multidimensional Scaling dalam Pemetaan Brand Positioning Internet Service Provider

    Directory of Open Access Journals (Sweden)

    Robertus Tang Herman

    2010-03-01

    Full Text Available In this high-tech era, there have been tremendous advances in tech-based products and services. Internet is one of them that have widened the world’s eyes to a new borderless marketplace. High competition among internet service providers has pushed companies to create competitive advantage and brilliant marketing strategies. They undertake positioning mapping to describe product or service’s positioning amongst many competitors. The right positioning strategy becomes a powerful weapon to win in the battle. This research is designed to create positioning mapping based on perceptual mapping. The researcher uses Multidimensional Scaling and image mapping to achieve this research goal. Sampling is using non-probability sampling in Jakarta. Based on non-attribute approach, the research findings show that there is similarity between two different brands. Thus, both brands are competing against one another. On the other hand, CBN and Netzap provider reflect some differences to others. And some brands require some improvements in terms of network reliability.

  15. Geometric modeling of controlled third-class hinged mechanisms with a stand in one extreme position for cyclic automatic machines

    Science.gov (United States)

    Khomchenko, V. G.; Varepo, L. G.; Glukhov, V. I.; Krivokhatko, E. A.

    2017-06-01

    The geometric model for the synthesis of third-class lever mechanisms is proposed, which allows, by changing the length of the auxiliary link and the position of its fixed hinge, to rearrange the movement of the working organ onto the cyclograms with different predetermined dwell times. It is noted that with the help of the proposed model, at the expense of the corresponding geometric constructions, the best uniform Chebyshev approximation can be achieved at the interval of the standstill.

  16. The Coo Effect in the International Brand Positioning Strategy

    Directory of Open Access Journals (Sweden)

    Barbara Kobuszewski Volles

    2016-12-01

    Full Text Available Abstract Purpose: This study aims to develop a model in order to understand how Chinese companies strategically position their brands, considering the causes of the country of origin (COO effect, when going through the process of internationalization. Design/methodology/approach: The study approach a qualitative case study that incorporates two different Chinese companies with subsidiaries settled in Brazil. It was conducted depth interviews with different components of the studied firms. Findings: In this way, it was developed a model that try to explain the positive and/or negative effect of general attributes from China (labor market, institution framework and education on the brand positioning divers (value preposition, points of leverage, primary target and image reinforcement, which influences on the cost-benefit strategy approach of the brands when positioning internationally. Research limitations/implications: Considering that this research is a qualitative study of two Chinese companies, further qualitative and quantitative studies would be fruitful to the validity of the presented model. Originality/value: In order to contribute to the academic field, it was found that this research present a unique model considering different causes of the COO effect that might affect the international branding positioning.

  17. Effects of positive potential in the catastrophe theory study of the point model for bumpy tori

    Energy Technology Data Exchange (ETDEWEB)

    Punjabi, A; Vahala, G [College of William and Mary, Williamsburg, VA (USA). Dept. of Physics

    1985-02-01

    With positive ambipolar potential, ion non-resonant neoclassical transport leads to increased particle confinement times. In certain regimes of filling pressure, microwave powers (ECRH and ICRH) and positive potential, new folds can now emerge from previously degenerate equilibrium surfaces allowing for distinct C, T, and M modes of operation. A comparison in the equilibrium fold structure is also made between (i) equal particle and energy confinement times, and (ii) particle confinement times enhanced over the energy confinement time. The nonlinear time evolution of these point model equations is considered and confirms the delay convention occurrences at the fold edges. It is clearly seen that the time-asymptotic equilibrium state is very sensitive, not only to the values of the control parameters (neutral density, ambipolar electrostatic potential, electron and ion cyclotron power densities) but also to the initial conditions on the plasma density, and electron and ion temperatures.

  18. A Method for The Assessing of Reliability Characteristics Relevant to an Assumed Position-Fixing Accuracy in Navigational Positioning Systems

    Directory of Open Access Journals (Sweden)

    Specht Cezary

    2016-09-01

    Full Text Available This paper presents a method which makes it possible to determine reliability characteristics of navigational positioning systems, relevant to an assumed value of permissible error in position fixing. The method allows to calculate: availability , reliability as well as operation continuity of position fixing system for an assumed, determined on the basis of formal requirements - both worldwide and national, position-fixing accuracy. The proposed mathematical model allows to satisfy, by any navigational positioning system, not only requirements as to position-fixing accuracy of a given navigational application (for air , sea or land traffic but also the remaining characteristics associated with technical serviceability of a system.

  19. Accurate decisions in an uncertain world: collective cognition increases true positives while decreasing false positives.

    Science.gov (United States)

    Wolf, Max; Kurvers, Ralf H J M; Ward, Ashley J W; Krause, Stefan; Krause, Jens

    2013-04-07

    In a wide range of contexts, including predator avoidance, medical decision-making and security screening, decision accuracy is fundamentally constrained by the trade-off between true and false positives. Increased true positives are possible only at the cost of increased false positives; conversely, decreased false positives are associated with decreased true positives. We use an integrated theoretical and experimental approach to show that a group of decision-makers can overcome this basic limitation. Using a mathematical model, we show that a simple quorum decision rule enables individuals in groups to simultaneously increase true positives and decrease false positives. The results from a predator-detection experiment that we performed with humans are in line with these predictions: (i) after observing the choices of the other group members, individuals both increase true positives and decrease false positives, (ii) this effect gets stronger as group size increases, (iii) individuals use a quorum threshold set between the average true- and false-positive rates of the other group members, and (iv) individuals adjust their quorum adaptively to the performance of the group. Our results have broad implications for our understanding of the ecology and evolution of group-living animals and lend themselves for applications in the human domain such as the design of improved screening methods in medical, forensic, security and business applications.

  20. New Schemes for Positive Real Truncation

    Directory of Open Access Journals (Sweden)

    Kari Unneland

    2007-07-01

    Full Text Available Model reduction, based on balanced truncation, of stable and of positive real systems are considered. An overview over some of the already existing techniques are given: Lyapunov balancing and stochastic balancing, which includes Riccati balancing. A novel scheme for positive real balanced truncation is then proposed, which is a combination of the already existing Lyapunov balancing and Riccati balancing. Using Riccati balancing, the solution of two Riccati equations are needed to obtain positive real reduced order systems. For the suggested method, only one Lyapunov equation and one Riccati equation are solved in order to obtain positive real reduced order systems, which is less computationally demanding. Further it is shown, that in order to get positive real reduced order systems, only one Riccati equation needs to be solved. Finally, this is used to obtain positive real frequency weighted balanced truncation.

  1. Resilience: Enhancing Well-Being through the Positive Cognitive Triad

    Science.gov (United States)

    Mak, Winnie W. S.; Ng, Ivy S. W.; Wong, Celia C. Y.

    2011-01-01

    The present study tested whether the relationships among resilience, life satisfaction, and depression could be explained by positive views toward the self, the world, and the future (positive cognitive triad). Structural equation modeling and mediation analyses were conducted based on 1,419 college students in Hong Kong. The model of positive…

  2. Relativistic positioning systems: Numerical simulations

    Science.gov (United States)

    Puchades Colmenero, Neus

    The position of users located on the Earth's surface or near it may be found with the classic positioning systems (CPS). Certain information broadcast by satellites of global navigation systems, as GPS and GALILEO, may be used for positioning. The CPS are based on the Newtonian formalism, although relativistic post-Newtonian corrections are done when they are necessary. This thesis contributes to the development of a different positioning approach, which is fully relativistic from the beginning. In the relativistic positioning systems (RPS), the space-time position of any user (ship, spacecraft, and so on) can be calculated with the help of four satellites, which broadcast their proper times by means of codified electromagnetic signals. In this thesis, we have simulated satellite 4-tuples of the GPS and GALILEO constellations. If a user receives the signals from four satellites simultaneously, the emission proper times read -after decoding- are the user "emission coordinates". In order to find the user "positioning coordinates", in an appropriate almost inertial reference system, there are two possibilities: (a) the explicit relation between positioning and emission coordinates (broadcast by the satellites) is analytically found or (b) numerical codes are designed to calculate the positioning coordinates from the emission ones. Method (a) is only viable in simple ideal cases, whereas (b) allows us to consider realistic situations. In this thesis, we have designed numerical codes with the essential aim of studying two appropriate RPS, which may be generalized. Sometimes, there are two real users placed in different positions, which receive the same proper times from the same satellites; then, we say that there is bifurcation, and additional data are needed to choose the real user position. In this thesis, bifurcation is studied in detail. We have analyzed in depth two RPS models; in both, it is considered that the satellites move in the Schwarzschild's space

  3. Position detectors, methods of detecting position, and methods of providing positional detectors

    Science.gov (United States)

    Weinberg, David M.; Harding, L. Dean; Larsen, Eric D.

    2002-01-01

    Position detectors, welding system position detectors, methods of detecting various positions, and methods of providing position detectors are described. In one embodiment, a welding system positional detector includes a base that is configured to engage and be moved along a curved surface of a welding work piece. At least one position detection apparatus is provided and is connected with the base and configured to measure angular position of the detector relative to a reference vector. In another embodiment, a welding system positional detector includes a weld head and at least one inclinometer mounted on the weld head. The one inclinometer is configured to develop positional data relative to a reference vector and the position of the weld head on a non-planar weldable work piece.

  4. A parallel process model of the development of positive smoking expectancies and smoking behavior during early adolescence in Caucasian and African American girls

    OpenAIRE

    Chung, Tammy; White, Helene R.; Hipwell, Alison E.; Stepp, Stephanie D.; Loeber, Rolf

    2010-01-01

    This study examined the development of positive smoking expectancies and smoking behavior in an urban cohort of girls followed annually over ages 11-14. Longitudinal data from the oldest cohort of the Pittsburgh Girls Study (N=566, 56% African American, 44% Caucasian) were used to estimate a parallel process growth model of positive smoking expectancies and smoking behavior. Average level of positive smoking expectancies was relatively stable over ages 11-14, although there was significant va...

  5. Determination of positions of optical elements of the human eye

    International Nuclear Information System (INIS)

    Galetskii, S O; Cherezova, T Yu

    2009-01-01

    An original method for noninvasive determining the positions of elements of intraocular optics is proposed. The analytic dependence of the measurement error on the optical-scheme parameters and the restriction in distance from the element being measured are determined within the framework of the method proposed. It is shown that the method can be efficiently used for determining the position of elements in the classical Gullstrand eye model and personalised eye models. The positions of six optical surfaces of the Gullstrand eye model and four optical surfaces of the personalised eye model can be determined with an error of less than 0.25 mm. (human eye optics)

  6. "When information is not enough": A model for understanding BRCA-positive previvors' information needs regarding hereditary breast and ovarian cancer risk.

    Science.gov (United States)

    Dean, Marleah; Scherr, Courtney L; Clements, Meredith; Koruo, Rachel; Martinez, Jennifer; Ross, Amy

    2017-09-01

    To investigate BRCA-positive, unaffected patients' - referred to as previvors - information needs after testing positive for a deleterious BRCA genetic mutation. 25 qualitative interviews were conducted with previvors. Data were analyzed using the constant comparison method of grounded theory. Analysis revealed a theoretical model of previvors' information needs related to the stage of their health journey. Specifically, a four-stage model was developed based on the data: (1) pre-testing information needs, (2) post-testing information needs, (3) pre-management information needs, and (4) post-management information needs. Two recurring dimensions of desired knowledge also emerged within the stages-personal/social knowledge and medical knowledge. While previvors may be genetically predisposed to develop cancer, they have not been diagnosed with cancer, and therefore have different information needs than cancer patients and cancer survivors. This model can serve as a framework for assisting healthcare providers in meeting the specific information needs of cancer previvors. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. Associations between five-factor model of the Positive and Negative Syndrome Scale and plasma levels of monoamine metabolite in patients with schizophrenia.

    Science.gov (United States)

    Watanabe, Kenya; Miura, Itaru; Kanno-Nozaki, Keiko; Horikoshi, Sho; Mashiko, Hirobumi; Niwa, Shin-Ichi; Yabe, Hirooki

    2015-12-15

    The five-factor model of the Positive and Negative Syndrome Scale (PANSS) for schizophrenia symptoms is the most common multiple-factor model used in analyses; its use may improve evaluation of symptoms in schizophrenia patients. Plasma monoamine metabolite levels are possible indicators of clinical symptoms or response to antipsychotics in schizophrenia. We investigated the association between five-factor model components and plasma monoamine metabolites levels to explore the model's biological basis. Plasma levels of homovanillic acid (HVA), 3-methoxy-4-hydroxyphenylglycol (MHPG), and 5-hydroxyindoleacetic acid (5-HIAA) were measured using high-performance liquid chromatography in 65 Japanese patients with schizophrenia. Significant negative correlation between plasma 5-HIAA levels and the depression/anxiety component was found. Furthermore, significant positive correlation was found between plasma MHPG levels and the excitement component. Plasma HVA levels were not correlated with any five-factor model component. These results suggest that the five-factor model of the PANSS may have a biological basis, and may be useful for elucidating the psychopathology of schizophrenia. Assessment using the five-factor model may enable understanding of monoaminergic dysfunction, possibly allowing more appropriate medication selection. Further studies of a larger number of first-episode schizophrenia patients are needed to confirm and extend these results. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  8. Positive organizational behavior and safety in the offshore oil industry: Exploring the determinants of positive safety climate.

    Science.gov (United States)

    Hystad, Sigurd W; Bartone, Paul T; Eid, Jarle

    2014-01-01

    Much research has now documented the substantial influence of safety climate on a range of important outcomes in safety critical organizations, but there has been scant attention to the question of what factors might be responsible for positive or negative safety climate. The present paper draws from positive organizational behavior theory to test workplace and individual factors that may affect safety climate. Specifically, we explore the potential influence of authentic leadership style and psychological capital on safety climate and risk outcomes. Across two samples of offshore oil-workers and seafarers working on oil platform supply ships, structural equation modeling yielded results that support a model in which authentic leadership exerts a direct effect on safety climate, as well as an indirect effect via psychological capital. This study shows the importance of leadership qualities as well as psychological factors in shaping a positive work safety climate and lowering the risk of accidents.

  9. Logotherapy and positive psychology

    Directory of Open Access Journals (Sweden)

    Oscar R. Oro

    2015-09-01

    Full Text Available Psychology omitted to approach, during almost a century, the positive aspects from persons, like creativity, humor, optimism, hope, forgiveness, life meaning, and happiness. These themes are approached by Positive Psychology, with Seligman like the principal exponent. Psychology was dedicated to explore the negative aspects from human beings improving human health. Nevertheless, this pathogenic model could not prevent mental disease. Concepts of Positive Psychology have a solid antecedent in Víktor Frankl ́s studies, which is the Logotherapy founder. This allows incorporating another perspective to approach positive aspects, from a philosophical and anthropological focus. Although the ways adopted by Frank and Seligman are different, both considered main aspects of human existence. Nevertheless, they investigated in different countries (from Europe and EE.UU.; in different circumstances (concentration camps, deaths, tortures; vs. academic context; in different historical periods and different social contexts (a country that lost the war and other that gave freedom to Europeans. In this work is used the concept life sense as the focus in professional formation and psychotherapy approach. 

  10. Dosimetric comparison of the specific anthropomorphic mannequin (SAM) to 14 anatomical head models using a novel definition for the mobile phone positioning

    International Nuclear Information System (INIS)

    Kainz, Wolfgang; Christ, Andreas; Kellom, Tocher; Seidman, Seth; Nikoloski, Neviana; Beard, Brian; Kuster, Niels

    2005-01-01

    This paper presents new definitions for obtaining reproducible results in numerical phone dosimetry. Numerous numerical dosimetric studies have been published about the exposure of mobile phone users which concluded with conflicting results. However, many of these studies lack reproducibility due to shortcomings in the description of the phone positioning. The new approach was tested by two groups applying two different numerical program packages to compare the specific anthropomorphic mannequin (SAM) to 14 anatomically correct head models. A novel definition for the positioning of mobile phones next to anatomically correct head models is given along with other essential parameters to be reported. The definition is solely based on anatomical characteristics of the head. A simple up-to-date phone model was used to determine the peak spatial specific absorption rate (SAR) of mobile phones in SAM and in the anatomically correct head models. The results were validated by measurements. The study clearly shows that SAM gives a conservative estimate of the exposure in anatomically correct head models for head only tissue. Depending on frequency, phone position and head size the numerically calculated 10 g averaged SAR in the pinna can be up to 2.1 times greater than the peak spatial SAR in SAM. Measurements in small structures, such as the pinna, will significantly increase the uncertainty; therefore SAM was designed for SAR assessment in the head only. Whether SAM will provide a conservative value for the pinna depends on the pinna SAR limit of the safety standard considered

  11. Validation of a model for predicting smear-positive active pulmonary tuberculosis in patients with initial acid-fast bacilli smear-negative sputum

    Energy Technology Data Exchange (ETDEWEB)

    Yeh, Jun-Jun [Department of Chest Medicine, Section of Thoracic Imaging, Ditmanson Medical Foundation Chia-Yi Christian Hospital, Chiayi City (China); Chia Nan University of Pharmacy and Science, Tainan (China); Meiho University, Pingtung (China); Pingtung Christian Hospital, Pingtung (China); Heng Chun Christian Hospital, Pingtung (China)

    2018-01-15

    The objective of this study was to develop a predictive model for final smear-positive (SP) active pulmonary tuberculosis (aPTB) in patients with initial negative acid fast bacilli (AFB) sputum smears (iSN-SP-aPTB) based on high-resolution computed tomography (HRCT). Eighty (126, 21) patients of iSN-SP-aPTB and 402 (459, 876) patients of non-initial positive acid fast bacilli (non-iSP) pulmonary disease without iSN-SP-aPTB were included in a derivation (validation, prospective) cohort. HRCT characteristics were analysed, and multivariable regression and receiver operating characteristic (ROC) curve analysis was performed to develop a score predictive of iSN-SP-aPTB. The derivation cohort showed clusters of nodules/mass of the right upper lobe or left upper lobe were independent predictors of iSN-SP-aPTB, while bronchiectasis in the right middle lobe or left lingual lobe were negatively associated with iSN-SP-aPTB. A predictive score for iSN-SP-aPTB based on these findings was tested in the validation and prospective cohorts. With an ideal cut-off score = 1, the sensitivity, specificity, positive predictive value, and negative predictive value of the prediction model were 87.5% (90%, 90.5%), 99% (97.1%, 98.4%), 94.6% (81.3%, 57.5%), and 97.6% (97%, 99.8%) in the derivation (validation, prospective) cohorts, respectively. The model may help identify iSN-SP-aPTB among patients with non-iSP pulmonary diseases. circle Smear-positive active pulmonary tuberculosis that is initial smear-negative (iSN-SP-aPTB) is infectious. (orig.)

  12. Automatic approach to deriving fuzzy slope positions

    Science.gov (United States)

    Zhu, Liang-Jun; Zhu, A.-Xing; Qin, Cheng-Zhi; Liu, Jun-Zhi

    2018-03-01

    Fuzzy characterization of slope positions is important for geographic modeling. Most of the existing fuzzy classification-based methods for fuzzy characterization require extensive user intervention in data preparation and parameter setting, which is tedious and time-consuming. This paper presents an automatic approach to overcoming these limitations in the prototype-based inference method for deriving fuzzy membership value (or similarity) to slope positions. The key contribution is a procedure for finding the typical locations and setting the fuzzy inference parameters for each slope position type. Instead of being determined totally by users in the prototype-based inference method, in the proposed approach the typical locations and fuzzy inference parameters for each slope position type are automatically determined by a rule set based on prior domain knowledge and the frequency distributions of topographic attributes. Furthermore, the preparation of topographic attributes (e.g., slope gradient, curvature, and relative position index) is automated, so the proposed automatic approach has only one necessary input, i.e., the gridded digital elevation model of the study area. All compute-intensive algorithms in the proposed approach were speeded up by parallel computing. Two study cases were provided to demonstrate that this approach can properly, conveniently and quickly derive the fuzzy slope positions.

  13. An advanced CFD model to study the effect of non-condensable gas on cavitation in positive displacement pumps

    Directory of Open Access Journals (Sweden)

    Iannetti Aldo

    2015-09-01

    Full Text Available An advanced transient CFD model of a positive displacement reciprocating pump was created to study its behavior and performance in cavitating condition during the inlet stroke. The “full” cavitation model developed by Singhal et al. was utilized, and a sensitivity analysis test on two air mass fraction amounts (1.5 and 15 parts per million was carried out to study the influence of the dissolved air content in water on the cavitation phenomenon. The model was equipped with user defined functions to introduce the liquid compressibility, which stabilizes the simulation, and to handle the two-way coupling between the pressure field and the inlet valve lift history. Estimation of the performance is also presented in both cases.

  14. Serial position learning in honeybees.

    Directory of Open Access Journals (Sweden)

    Randolf Menzel

    Full Text Available Learning of stimulus sequences is considered as a characteristic feature of episodic memory since it contains not only a particular item but also the experience of preceding and following events. In sensorimotor tasks resembling navigational performance, the serial order of objects is intimately connected with spatial order. Mammals and birds develop episodic(-like memory in serial spatio-temporal tasks, and the honeybee learns spatio-temporal order when navigating between the nest and a food source. Here I examine the structure of the bees' memory for a combined spatio-temporal task. I ask whether discrimination and generalization are based solely on simple forms of stimulus-reward learning or whether they require sequential configurations. Animals were trained to fly either left or right in a continuous T-maze. The correct choice was signaled by the sequence of colors (blue, yellow at four positions in the access arm. If only one of the possible 4 signals is shown (either blue or yellow, the rank order of position salience is 1, 2 and 3 (numbered from T-junction. No learning is found if the signal appears at position 4. If two signals are shown, differences at positions 1 and 2 are learned best, those at position 3 at a low level, and those at position 4 not at all. If three or more signals are shown these results are corroborated. This salience rank order again appeared in transfer tests, but additional configural phenomena emerged. Most of the results can be explained with a simple model based on the assumption that the four positions are equipped with different salience scores and that these add up independently. However, deviations from the model are interpreted by assuming stimulus configuration of sequential patterns. It is concluded that, under the conditions chosen, bees rely most strongly on memories developed during simple forms of associative reward learning, but memories of configural serial patterns contribute, too.

  15. Positioning and number of nutritional levels in dose-response trials to estimate the optimal-level and the adjustment of the models

    Directory of Open Access Journals (Sweden)

    Fernando Augusto de Souza

    2014-07-01

    Full Text Available The aim of this research was to evaluate the influence of the number and position of nutrient levels used in dose-response trials in the estimation of the optimal-level (OL and the goodness of fit on the models: quadratic polynomial (QP, exponential (EXP, linear response plateau (LRP and quadratic response plateau (QRP. It was used data from dose-response trials realized in FCAV-Unesp Jaboticabal considering the homogeneity of variances and normal distribution. The fit of the models were evaluated considered the following statistics: adjusted coefficient of determination (R²adj, coefficient of variation (CV and the sum of the squares of deviations (SSD.It was verified in QP and EXP models that small changes on the placement and distribution of the levels caused great changes in the estimation of the OL. The LRP model was deeply influenced by the absence or presence of the level between the response and stabilization phases (change in the straight to plateau. The QRP needed more levels on the response phase and the last level on stabilization phase to estimate correctly the plateau. It was concluded that the OL and the adjust of the models are dependent on the positioning and the number of the levels and the specific characteristics of each model, but levels defined near to the true requirement and not so spaced are better to estimate the OL.

  16. Development of a mechanical model to analysis motion of standing up from the sitting position

    Directory of Open Access Journals (Sweden)

    Kasım Serbest

    2013-08-01

    Full Text Available In this study, a human body has been composed as a 6 rigid-open loop-body model which is consisted of a leg, a foot, a thigh, a trunk, an arm and a fore arm. To determine the anthropometric characteristics of the bodies has been benefited from anthropometric models and the computer software. The movements of the subject markers placed on body was viewed with a video camera in order to get location data of joints and the digitization process was made. It was computed the angular displacement, angular velocity and angular acceleration of the joints using by MATLAB (7.6.0. The obtained data was used to actuate inverse dynamics model which is created by SimMechanics (2.7.1.Motion of standing up from the sitting position was simulated by using SimMechanics software. It was compared ground reaction force calculated by SimMechanics with ground reaction force measured by force platform. This study was also shown that SimMechanics software which is developed to analyse mechanical systems in real dimensions dynamically can be used for human motion analysis. Furthermore, the simulating process has been useful to explain kinetic behaviour of the human movement.

  17. Child ADHD Severity and Positive and Negative Parenting as Predictors of Child Social Functioning: Evaluation of Three Theoretical Models

    Science.gov (United States)

    Kaiser, Nina M.; McBurnett, Keith; Pfiffner, Linda J.

    2011-01-01

    Objective: Prior research has established links between child social functioning and both parenting and child ADHD severity; however, research examining the way that these variables work together is lacking. The current article aims to test three possible models (main effects, mediation, and moderation) by which ADHD severity and positive and…

  18. Fractional-Order Control of Pneumatic Position Servosystems

    OpenAIRE

    Junyi, Cao; Binggang, Cao

    2011-01-01

    A fractional-order control strategy for pneumatic position servosystem is presented in this paper. The idea of the fractional calculus application to control theory was introduced in many works, and its advantages were proved. However, the realization of fractional-order controllers for pneumatic position servosystems has not been investigated. Based on the relationship between the pressure in cylinder and the rate of mass flow into the cylinder, the dynamic model of pneumatic position servo ...

  19. Attentional control mediates the effect of social anxiety on positive affect☆

    Science.gov (United States)

    Morrison, Amanda S.; Heimberg, Richard G.

    2015-01-01

    The goal of the present studies was to examine whether attentional control, a self-regulatory attentional mechanism, mediates the effect of social anxiety on positive affect. We tested this mediation in two studies using undergraduate students selected to represent a broad range of severity of social anxiety. Self-report assessments of social anxiety, attentional control, and positive affect were collected in a cross-sectional design (Study 1) and in a longitudinal design with three assessment points (Study 2). Results of both studies supported the hypothesized mediational model. Specifically, social anxiety was inversely related to attentional control, which itself positively predicted positive affect. This mediation remained significant even when statistically controlling for the effects of depression. Additionally, the hypothesized model provided superior model fit to theoretically-grounded equivalent models in both studies. Implications of these findings for understanding diminished positive affect in social anxiety are discussed. PMID:23254261

  20. Directional Positive Selection on an Allele of Arbitrary Dominance

    OpenAIRE

    Teshima, Kosuke M.; Przeworski, Molly

    2006-01-01

    Most models of positive directional selection assume codominance of the beneficial allele. We examine the importance of this assumption by implementing a coalescent model of positive directional selection with arbitrary dominance. We find that, for a given mean fixation time, a beneficial allele has a much weaker effect on diversity at linked neutral sites when the allele is recessive.

  1. Mid-ventilation position planning: Optimal model for dose distribution in lung tumour

    International Nuclear Information System (INIS)

    Benchalal, M.; Leseur, J.; Chajon, E.; Cazoulat, G.; Haigron, P.; Simon, A.; Bellec, J.; Lena, H.; Crevoisier, R. de

    2012-01-01

    Purpose. - The dose distribution for lung tumour is estimated using a 3D-CT scan, and since a person breathes while the images are captured, the dose distribution doesn't reflect the reality. A 4D-CT scan integrates the motion of the tumour during breathing and, therefore, provides us with important information regarding tumour's motion in all directions, the motion volume (ITV) and the time-weighted average position (MVP). Patient and methods. - Based on these two concepts, we have estimated, for a lung carcinoma case a 3D dose distribution from a 3D-CT scan, and a 4D dose distribution from a 4-D CT scan. To this, we have applied a non-rigid registration to estimate the cumulative dose. Results. - Our study shows that the 4D dose estimation of the GTV is almost the same when made using MVP and ITV concepts, but sparring of the healthy lung is better done using the MPV model (MVP), as compared to the ITV model. This improvement of the therapeutic index allows, from a projection on the theoretical maximal dose to PTV (strictly restricted to doses for the lungs and the spinal cord), for an increase of about 11% on the total dose (maximal dose of 86 Gy for the ITV and 96 Gy for the MVP). Conclusion. - Further studies with more patients are needed to confirm our data. (authors)

  2. An exploratory path model of the relationships between positive and negative adaptation to cancer on quality of life among non-Hodgkin lymphoma survivors.

    Science.gov (United States)

    Bryant, Ashley Leak; Smith, Sophia K; Zimmer, Catherine; Crandell, Jamie; Jenerette, Coretta M; Bailey, Donald E; Zimmerman, Sheryl; Mayer, Deborah K

    2015-01-01

    Adaptation is an ongoing, cognitive process with continuous appraisal of the cancer experience by the survivor. This exploratory study tested a path model examining the personal (demographic, disease, and psychosocial) characteristics associated with quality of life (QOL) and whether or not adaptation to living with cancer may mediate these effects. This study employed path analysis to estimate adaptation to cancer. A cross-sectional sample of NHL survivors (N = 750) was used to test the model. Eligible participants were ≥ 18 years, at least 2 years post-diagnosis, and living with or without active disease. Sixty-eight percent of the variance was accounted for in QOL. The strongest effect (-0.596) was direct by negative adaptation, approximately 3 times that of positive adaptation (0.193). The strongest demographic total effects on QOL were age and social support; effect on QOL; each additional comorbidity was associated with a 0.309 standard deviation decline on QOL. There were no fully mediated effects through positive adaptation alone. Our exploratory findings support the coexistence of positive and negative adaptations perception as mediators of personal characteristics of the cancer experience. Negative adaptation can affect QOL in a positive way. Cancer survivorship is simultaneously shaped by both positive and negative adaptation with future research and implications for practice aimed at improving QOL.

  3. Positive random fields for modeling material stiffness and compliance

    DEFF Research Database (Denmark)

    Hasofer, Abraham Michael; Ditlevsen, Ove Dalager; Tarp-Johansen, Niels Jacob

    1998-01-01

    Positive random fields with known marginal properties and known correlation function are not numerous in the literature. The most prominent example is the log\\-normal field for which the complete distribution is known and for which the reciprocal field is also lognormal. It is of interest to supp...

  4. Accurate mean-field modeling of the Barkhausen noise power in ferromagnetic materials, using a positive-feedback theory of ferromagnetism

    Science.gov (United States)

    Harrison, R. G.

    2015-07-01

    A mean-field positive-feedback (PFB) theory of ferromagnetism is used to explain the origin of Barkhausen noise (BN) and to show why it is most pronounced in the irreversible regions of the hysteresis loop. By incorporating the ABBM-Sablik model of BN into the PFB theory, we obtain analytical solutions that simultaneously describe both the major hysteresis loop and, by calculating separate expressions for the differential susceptibility in the irreversible and reversible regions, the BN power response at all points of the loop. The PFB theory depends on summing components of the applied field, in particular, the non-monotonic field-magnetization relationship characterizing hysteresis, associated with physical processes occurring in the material. The resulting physical model is then validated by detailed comparisons with measured single-peak BN data in three different steels. It also agrees with the well-known influence of a demagnetizing field on the position and shape of these peaks. The results could form the basis of a physics-based method for modeling and understanding the significance of the observed single-peak (and in multi-constituent materials, multi-peak) BN envelope responses seen in contemporary applications of BN, such as quality control in manufacturing, non-destructive testing, and monitoring the microstructural state of ferromagnetic materials.

  5. A positive and entropy-satisfying finite volume scheme for the Baer-Nunziato model

    Science.gov (United States)

    Coquel, Frédéric; Hérard, Jean-Marc; Saleh, Khaled

    2017-02-01

    We present a relaxation scheme for approximating the entropy dissipating weak solutions of the Baer-Nunziato two-phase flow model. This relaxation scheme is straightforwardly obtained as an extension of the relaxation scheme designed in [16] for the isentropic Baer-Nunziato model and consequently inherits its main properties. To our knowledge, this is the only existing scheme for which the approximated phase fractions, phase densities and phase internal energies are proven to remain positive without any restrictive condition other than a classical fully computable CFL condition. For ideal gas and stiffened gas equations of state, real values of the phasic speeds of sound are also proven to be maintained by the numerical scheme. It is also the only scheme for which a discrete entropy inequality is proven, under a CFL condition derived from the natural sub-characteristic condition associated with the relaxation approximation. This last property, which ensures the non-linear stability of the numerical method, is satisfied for any admissible equation of state. We provide a numerical study for the convergence of the approximate solutions towards some exact Riemann solutions. The numerical simulations show that the relaxation scheme compares well with two of the most popular existing schemes available for the Baer-Nunziato model, namely Schwendeman-Wahle-Kapila's Godunov-type scheme [39] and Tokareva-Toro's HLLC scheme [44]. The relaxation scheme also shows a higher precision and a lower computational cost (for comparable accuracy) than a standard numerical scheme used in the nuclear industry, namely Rusanov's scheme. Finally, we assess the good behavior of the scheme when approximating vanishing phase solutions.

  6. Phylogeny, ecology, and heart position in snakes.

    Science.gov (United States)

    Gartner, Gabriel E A; Hicks, James W; Manzani, Paulo R; Andrade, Denis V; Abe, Augusto S; Wang, Tobias; Secor, Stephen M; Garland, Theodore

    2010-01-01

    The cardiovascular system of all animals is affected by gravitational pressure gradients, the intensity of which varies according to organismic features, behavior, and habitat occupied. A previous nonphylogenetic analysis of heart position in snakes-which often assume vertical postures-found the heart located 15%-25% of total body length from the head in terrestrial and arboreal species but 25%-45% in aquatic species. It was hypothesized that a more anterior heart in arboreal species served to reduce the hydrostatic blood pressure when these animals adopt vertical postures during climbing, whereas an anterior heart position would not be needed in aquatic habitats, where the effects of gravity are less pronounced. We analyzed a new data set of 155 species from five major families of Alethinophidia (one of the two major branches of snakes, the other being blind snakes, Scolecophidia) using both conventional and phylogenetically based statistical methods. General linear models regressing log(10) snout-heart position on log(10) snout-vent length (SVL), as well as dummy variables coding for habitat and/or clade, were compared using likelihood ratio tests and the Akaike Information Criterion. Heart distance to the tip of the snout scaled isometrically with SVL. In all instances, phylogenetic models that incorporated transformation of the branch lengths under an Ornstein-Uhlenbeck model of evolution (to mimic stabilizing selection) better fit the data as compared with their nonphylogenetic counterparts. The best-fit model predicting snake heart position included aspects of both habitat and clade and indicated that arboreal snakes in our study tend to have hearts placed more posteriorly, opposite the trend identified in previous studies. Phylogenetic signal in relative heart position was apparent both within and among clades. Our results suggest that overcoming gravitational pressure gradients in snakes most likely involves the combined action of several cardiovascular and

  7. Continuous Indoor Positioning Fusing WiFi, Smartphone Sensors and Landmarks.

    Science.gov (United States)

    Deng, Zhi-An; Wang, Guofeng; Qin, Danyang; Na, Zhenyu; Cui, Yang; Chen, Juan

    2016-09-05

    To exploit the complementary strengths of WiFi positioning, pedestrian dead reckoning (PDR), and landmarks, we propose a novel fusion approach based on an extended Kalman filter (EKF). For WiFi positioning, unlike previous fusion approaches setting measurement noise parameters empirically, we deploy a kernel density estimation-based model to adaptively measure the related measurement noise statistics. Furthermore, a trusted area of WiFi positioning defined by fusion results of previous step and WiFi signal outlier detection are exploited to reduce computational cost and improve WiFi positioning accuracy. For PDR, we integrate a gyroscope, an accelerometer, and a magnetometer to determine the user heading based on another EKF model. To reduce accumulation error of PDR and enable continuous indoor positioning, not only the positioning results but also the heading estimations are recalibrated by indoor landmarks. Experimental results in a realistic indoor environment show that the proposed fusion approach achieves substantial positioning accuracy improvement than individual positioning approaches including PDR and WiFi positioning.

  8. Stereo Photogrammetry Measurements of the Position and Attitude of a Nozzle-Plume/Shock-Wave Interaction Model in the NASA Ames 9- by 7-Ft Supersonic Wind Tunnel

    Science.gov (United States)

    Schairer, Edward T.; Kushner, Laura K.; Drain, Bethany A.; Heineck, James T.; Durston, Donald A.

    2017-01-01

    Stereo photogrammetry was used to measure the position and attitude of a slender body of revolution during nozzle-plume/shock-wave interaction tests in the NASA Ames 9- by 7-Ft Supersonic Wind Tunnel. The model support system was designed to allow the model to be placed at many locations in the test section relative to a pressure rail on one sidewall. It included a streamwise traverse as well as a thin blade that offset the model axis from the sting axis. With these features the support system was more flexible than usual resulting in higher-than-usual uncertainty in the position and attitude of the model. Also contributing to this uncertainty were the absence of a balance, so corrections for sting deflections could not be applied, and the wings-vertical orientation of the model, which precluded using a gravity-based accelerometer to measure pitch angle. Therefore, stereo photogrammetry was chosen to provide independent measures of the model position and orientation. This paper describes the photogrammetry system and presents selected results from the test.

  9. Positive organizational behavior and safety in the offshore oil industry: Exploring the determinants of positive safety climate

    Science.gov (United States)

    Hystad, Sigurd W.; Bartone, Paul T.; Eid, Jarle

    2013-01-01

    Much research has now documented the substantial influence of safety climate on a range of important outcomes in safety critical organizations, but there has been scant attention to the question of what factors might be responsible for positive or negative safety climate. The present paper draws from positive organizational behavior theory to test workplace and individual factors that may affect safety climate. Specifically, we explore the potential influence of authentic leadership style and psychological capital on safety climate and risk outcomes. Across two samples of offshore oil-workers and seafarers working on oil platform supply ships, structural equation modeling yielded results that support a model in which authentic leadership exerts a direct effect on safety climate, as well as an indirect effect via psychological capital. This study shows the importance of leadership qualities as well as psychological factors in shaping a positive work safety climate and lowering the risk of accidents. PMID:24454524

  10. Expert model of decision-making system for efficient orientation of basketball players to positions and roles in the game--empirical verification.

    Science.gov (United States)

    Dezman, B; Trninić, S; Dizdar, D

    2001-06-01

    The purpose of the research was to empirically verify the expert model system designed for more efficient orientation of basketball players to particular positions and /or roles in the game (specialization). Participants were 60 randomly chosen male basketball players (12 players per each position) from the 12 Croatian 1st league teams in season 1998/99. Data were gathered from 10 basketball coaches who estimated overall performance (actual quality) of players on defense (7 variables) and on offense (12 variables). Variables were established by Trninić, Perica and Dizdar. A measure of body height was added to the aforementioned group of variables. The results obtained suggest that the proposed decision-making system can be used as an auxiliary instrument in orienting players to the positions and roles in the game. It has been established that the players have attained the highest grades of overall performance exactly at their primary playing positions in the game. The largest differences were determined between point guards (position 1) and centers (position 5). The greatest difficulties have occurred in determining optimal position for small forwards (position 3), then for shooting guards (position 2) and, last, for power forwards (position 4), because all these basketball players are the most versatile ones. Therefore, reliability of the system is the lowest when it is applied for selecting and orientating players to these positions. Convenient body height significantly contributes to aptitude of these players to play multiple positions and to assume multiple roles in the game. This research has reinforced the thesis that body height is a variable with the greatest influence on orientation of players to particular positions and roles in the game.

  11. Positions in doctors' questions during psychiatric interviews.

    Science.gov (United States)

    Ziółkowska, Justyna

    2009-11-01

    In this article I apply the concept of positioning to the analysis of 15 initial psychiatric interviews. I argue that through their questions the psychiatrists-in-training impose positions requiring the patients to gaze at themselves and their actual problems from particular perspectives. I point to three such positions: (a) the position of the observing assessor, from which it is expected that the patients will make a detached assessment of themselves or their problems, (b) the position of the informing witness, which requires the patients only to verify the information about themselves, and (c) the marginal one, the position of the experiencing narrator, from which talk about experiences and problems is expected. I explore the roots and consequences of the positions, with particular attention toward objectivization of the patients' experiences in the dominant witness and assessor positions. I conclude with a discussion about the medical model in psychiatry.

  12. Spatial signals link exit from mitosis to spindle position.

    Science.gov (United States)

    Falk, Jill Elaine; Tsuchiya, Dai; Verdaasdonk, Jolien; Lacefield, Soni; Bloom, Kerry; Amon, Angelika

    2016-05-11

    In budding yeast, if the spindle becomes mispositioned, cells prevent exit from mitosis by inhibiting the mitotic exit network (MEN). The MEN is a signaling cascade that localizes to spindle pole bodies (SPBs) and activates the phosphatase Cdc14. There are two competing models that explain MEN regulation by spindle position. In the 'zone model', exit from mitosis occurs when a MEN-bearing SPB enters the bud. The 'cMT-bud neck model' posits that cytoplasmic microtubule (cMT)-bud neck interactions prevent MEN activity. Here we find that 1) eliminating cMT- bud neck interactions does not trigger exit from mitosis and 2) loss of these interactions does not precede Cdc14 activation. Furthermore, using binucleate cells, we show that exit from mitosis occurs when one SPB enters the bud despite the presence of a mispositioned spindle. We conclude that exit from mitosis is triggered by a correctly positioned spindle rather than inhibited by improper spindle position.

  13. A novel method for estimating the initial rotor position of PM motors without the position sensor

    International Nuclear Information System (INIS)

    Rostami, Alireza; Asaei, Behzad

    2009-01-01

    Permanent magnet (PM) motors have been used widely in the industrial applications. However, a need of the position sensor is a drawback of their control system. The sensorless methods using the back-EMF (electromotive force) cannot detect the rotor position at a standstill; recently, a few methods proposed to detect the initial rotor position, but they have high estimation error which reduces starting torque of the motor. Therefore, in this paper, a novel method to detect the initial rotor position of the PM motors is proposed, first, by using a space vector model, response of the stator current space vector to the saturation of the stator core is analyzed; then a novel method based on the saturation effect is presented that estimates the initial rotor position and the maximum estimation error is less than 3.8 deg. Simulation results confirm this method is effective and precise, and variation of the motor parameters does not affect its precision.

  14. A novel method for estimating the initial rotor position of PM motors without the position sensor

    Energy Technology Data Exchange (ETDEWEB)

    Rostami, Alireza; Asaei, Behzad [School of Electrical and Computer Engineering, Faculty of Engineering, University of Tehran, Tehran (Iran)

    2009-08-15

    Permanent magnet (PM) motors have been used widely in the industrial applications. However, a need of the position sensor is a drawback of their control system. The sensorless methods using the back-EMF (electromotive force) cannot detect the rotor position at a standstill; recently, a few methods proposed to detect the initial rotor position, but they have high estimation error which reduces starting torque of the motor. Therefore, in this paper, a novel method to detect the initial rotor position of the PM motors is proposed, first, by using a space vector model, response of the stator current space vector to the saturation of the stator core is analyzed; then a novel method based on the saturation effect is presented that estimates the initial rotor position and the maximum estimation error is less than 3.8. Simulation results confirm this method is effective and precise, and variation of the motor parameters does not affect its precision. (author)

  15. Symbolic interactionism in grounded theory studies: women surviving with HIV/AIDS in rural northern Thailand.

    Science.gov (United States)

    Klunklin, Areewan; Greenwood, Jennifer

    2006-01-01

    Although it is generally acknowledged that symbolic interactionism and grounded theory are connected, the precise nature of their connection remains implicit and unexplained. As a result, many grounded theory studies are undertaken without an explanatory framework. This in turn results in the description rather than the explanation of data determined. In this report, the authors make explicit and explain the nature of the connections between symbolic interactionism and grounded theory research. Specifically, they make explicit the connection between Blumer's methodological principles and processes and grounded theory methodology. In addition, the authors illustrate the explanatory power of symbolic interactionism in grounded theory using data from a study of the HIV/AIDS experiences of married and widowed Thai women.

  16. Existence and Uniqueness of Positive Periodic Solutions for a Delayed Predator-Prey Model with Dispersion and Impulses

    Directory of Open Access Journals (Sweden)

    Zhenguo Luo

    2014-01-01

    Full Text Available An impulsive Lotka-Volterra type predator-prey model with prey dispersal in two-patch environments and time delays is investigated, where we assume the model of patches with a barrier only as far as the prey population is concerned, whereas the predator population has no barriers between patches. By applying the continuation theorem of coincidence degree theory and by means of a suitable Lyapunov functional, a set of easily verifiable sufficient conditions are obtained to guarantee the existence, uniqueness, and global stability of positive periodic solutions of the system. Some known results subject to the underlying systems without impulses are improved and generalized. As an application, we also give two examples to illustrate the feasibility of our main results.

  17. Position-dependent Effects of Polylysine on Sec Protein Transport*

    Science.gov (United States)

    Liang, Fu-Cheng; Bageshwar, Umesh K.; Musser, Siegfried M.

    2012-01-01

    The bacterial Sec protein translocation system catalyzes the transport of unfolded precursor proteins across the cytoplasmic membrane. Using a recently developed real time fluorescence-based transport assay, the effects of the number and distribution of positive charges on the transport time and transport efficiency of proOmpA were examined. As expected, an increase in the number of lysine residues generally increased transport time and decreased transport efficiency. However, the observed effects were highly dependent on the polylysine position in the mature domain. In addition, a string of consecutive positive charges generally had a more significant effect on transport time and efficiency than separating the charges into two or more charged segments. Thirty positive charges distributed throughout the mature domain resulted in effects similar to 10 consecutive charges near the N terminus of the mature domain. These data support a model in which the local effects of positive charge on the translocation kinetics dominate over total thermodynamic constraints. The rapid translocation kinetics of some highly charged proOmpA mutants suggest that the charge is partially shielded from the electric field gradient during transport, possibly by the co-migration of counter ions. The transport times of precursors with multiple positively charged sequences, or “pause sites,” were fairly well predicted by a local effect model. However, the kinetic profile predicted by this local effect model was not observed. Instead, the transport kinetics observed for precursors with multiple polylysine segments support a model in which translocation through the SecYEG pore is not the rate-limiting step of transport. PMID:22367204

  18. Position-dependent effects of polylysine on Sec protein transport.

    Science.gov (United States)

    Liang, Fu-Cheng; Bageshwar, Umesh K; Musser, Siegfried M

    2012-04-13

    The bacterial Sec protein translocation system catalyzes the transport of unfolded precursor proteins across the cytoplasmic membrane. Using a recently developed real time fluorescence-based transport assay, the effects of the number and distribution of positive charges on the transport time and transport efficiency of proOmpA were examined. As expected, an increase in the number of lysine residues generally increased transport time and decreased transport efficiency. However, the observed effects were highly dependent on the polylysine position in the mature domain. In addition, a string of consecutive positive charges generally had a more significant effect on transport time and efficiency than separating the charges into two or more charged segments. Thirty positive charges distributed throughout the mature domain resulted in effects similar to 10 consecutive charges near the N terminus of the mature domain. These data support a model in which the local effects of positive charge on the translocation kinetics dominate over total thermodynamic constraints. The rapid translocation kinetics of some highly charged proOmpA mutants suggest that the charge is partially shielded from the electric field gradient during transport, possibly by the co-migration of counter ions. The transport times of precursors with multiple positively charged sequences, or "pause sites," were fairly well predicted by a local effect model. However, the kinetic profile predicted by this local effect model was not observed. Instead, the transport kinetics observed for precursors with multiple polylysine segments support a model in which translocation through the SecYEG pore is not the rate-limiting step of transport.

  19. Canadian government's framing of ageing at work and older workers: Echoing positive ageing models.

    Science.gov (United States)

    Lagacé, Martine; Nahon-Serfaty, Isaac; Laplante, Joelle

    2015-01-01

    Public representations of ageing can influence how individuals perceive their own experience of ageing. Results of studies on the OECD (Organisation for Economic Co-operation and Development)'s governmental messages on older workers suggest that they are mainly constructed around economic productivity and personal responsibility. The goal of this study is to examine how the Canadian government frames issues around ageing, work and older workers. Canada is facing a rapidly ageing workforce, hence the importance of examining how the government discusses ageing at work. A thematic content analysis was conducted on a total of 154 government web pages. Results revealed that predominant themes revolve around economic challenges resulting from an ageing workforce. Older workers are depicted as a key component for the (economic) management of an ageing workforce. More specifically, older workers who intend to continue working are highly valued in the government's messages which present them as productive citizens and role models for "ageing well". Canada's response to the challenges of an ageing workforce echoes the underlying standards of positive ageing models, which may generate, perhaps inadvertently, a new form of ageism by creating intra-and intergenerational divides in the workplace.

  20. Differences in within- and between-person factor structure of positive and negative affect: analysis of two intensive measurement studies using multilevel structural equation modeling.

    Science.gov (United States)

    Rush, Jonathan; Hofer, Scott M

    2014-06-01

    The Positive and Negative Affect Schedule (PANAS) is a widely used measure of emotional experience. The factor structure of the PANAS has been examined predominantly with cross-sectional designs, which fails to disaggregate within-person variation from between-person differences. There is still uncertainty as to the factor structure of positive and negative affect and whether they constitute 2 distinct independent factors. The present study examined the within-person and between-person factor structure of the PANAS in 2 independent samples that reported daily affect over 7 and 14 occasions, respectively. Results from multilevel confirmatory factor analyses revealed that a 2-factor structure at both the within-person and between-person levels, with correlated specific factors for overlapping items, provided good model fit. The best-fitting solution was one where within-person factors of positive and negative affect were inversely correlated, but between-person factors were independent. The structure was further validated through multilevel structural equation modeling examining the effects of cognitive interference, daily stress, physical symptoms, and physical activity on positive and negative affect factors.

  1. Cylinder Position Servo Control Based on Fuzzy PID

    Directory of Open Access Journals (Sweden)

    Shibo Cai

    2013-01-01

    Full Text Available The arbitrary position control of cylinder has always been the hard challenge in pneumatic system. We try to develop a cylinder position servo control method by combining fuzzy PID with the theoretical model of the proportional valve-controlled cylinder system. The pressure differential equation of cylinder, pressure-flow equation of proportional valve, and moment equilibrium equation of cylinder are established. And the mathematical models of the cylinder driving system are linearized. Then fuzzy PID control algorithm is designed for the cylinder position control, including the detail analysis of fuzzy variables and domain, fuzzy logic rules, and defuzzification. The stability of the proposed fuzzy PID controller is theoretically proved according to the small gain theorem. Experiments for targets position of 250 mm, 300 mm, and 350 mm were done and the results showed that the absolute error of the position control is less than 0.25 mm. And comparative experiment between fuzzy PID and classical PID verified the advantage of the proposed algorithm.

  2. Fractional-Order Control of Pneumatic Position Servosystems

    Directory of Open Access Journals (Sweden)

    Cao Junyi

    2011-01-01

    Full Text Available A fractional-order control strategy for pneumatic position servosystem is presented in this paper. The idea of the fractional calculus application to control theory was introduced in many works, and its advantages were proved. However, the realization of fractional-order controllers for pneumatic position servosystems has not been investigated. Based on the relationship between the pressure in cylinder and the rate of mass flow into the cylinder, the dynamic model of pneumatic position servo system is established. The fractional-order controller for pneumatic position servo and its implementation in industrial computer is designed. The experiments with fractional-order controller are carried out under various conditions, which include sine position signal with different frequency and amplitude, step position signal, and variety inertial load. The results show the effectiveness of the proposed scheme and verify their fine control performance for pneumatic position servo system.

  3. Determination of the structure of γ-alumina from interatomic potential and first-principles calculations: The requirement of significant numbers of nonspinel positions to achieve an accurate structural model

    International Nuclear Information System (INIS)

    Paglia, Gianluca; Rohl, Andrew L.; Gale, Julian D.; Buckley, Craig E.

    2005-01-01

    We have performed an extensive computational study of γ-Al 2 O 3 , beginning with the geometric analysis of approximately 1.47 billion spinel-based structural candidates, followed by derivative method energy minimization calculations of approximately 122 000 structures. Optimization of the spinel-based structural models demonstrated that structures exhibiting nonspinel site occupancy after simulation were more energetically favorable, as suggested in other computational studies. More importantly, none of the spinel structures exhibited simulated diffraction patterns that were characteristic of γ-Al 2 O 3 . This suggests that cations of γ-Al 2 O 3 are not exclusively held in spinel positions, that the spinel model of γ-Al 2 O 3 does not accurately reflect its structure, and that a representative structure cannot be achieved from molecular modeling when the spinel representation is used as the starting structure. The latter two of these three findings are extremely important when trying to accurately model the structure. A second set of starting models were generated with a large number of cations occupying c symmetry positions, based on the findings from recent experiments. Optimization of the new c symmetry-based structural models resulted in simulated diffraction patterns that were characteristic of γ-Al 2 O 3 . The modeling, conducted using supercells, yields a more accurate and complete determination of the defect structure of γ-Al 2 O 3 than can be achieved with current experimental techniques. The results show that on average over 40% of the cations in the structure occupy nonspinel positions, and approximately two-thirds of these occupy c symmetry positions. The structures exhibit variable occupancy in the site positions that follow local symmetry exclusion rules. This variation was predominantly represented by a migration of cations away from a symmetry positions to other tetrahedral site positions during optimization which were found not to affect the

  4. A positive and entropy-satisfying finite volume scheme for the Baer–Nunziato model

    Energy Technology Data Exchange (ETDEWEB)

    Coquel, Frédéric, E-mail: frederic.coquel@cmap.polytechnique.fr [CMAP, École Polytechnique CNRS, UMR 7641, Route de Saclay, F-91128 Palaiseau cedex (France); Hérard, Jean-Marc, E-mail: jean-marc.herard@edf.fr [EDF-R& D, Département MFEE, 6 Quai Watier, F-78401 Chatou Cedex (France); Saleh, Khaled, E-mail: saleh@math.univ-lyon1.fr [Université de Lyon, CNRS UMR 5208, Université Lyon 1, Institut Camille Jordan, 43 bd 11 novembre 1918, F-69622 Villeurbanne cedex (France)

    2017-02-01

    We present a relaxation scheme for approximating the entropy dissipating weak solutions of the Baer–Nunziato two-phase flow model. This relaxation scheme is straightforwardly obtained as an extension of the relaxation scheme designed in for the isentropic Baer–Nunziato model and consequently inherits its main properties. To our knowledge, this is the only existing scheme for which the approximated phase fractions, phase densities and phase internal energies are proven to remain positive without any restrictive condition other than a classical fully computable CFL condition. For ideal gas and stiffened gas equations of state, real values of the phasic speeds of sound are also proven to be maintained by the numerical scheme. It is also the only scheme for which a discrete entropy inequality is proven, under a CFL condition derived from the natural sub-characteristic condition associated with the relaxation approximation. This last property, which ensures the non-linear stability of the numerical method, is satisfied for any admissible equation of state. We provide a numerical study for the convergence of the approximate solutions towards some exact Riemann solutions. The numerical simulations show that the relaxation scheme compares well with two of the most popular existing schemes available for the Baer–Nunziato model, namely Schwendeman–Wahle–Kapila's Godunov-type scheme and Tokareva–Toro's HLLC scheme . The relaxation scheme also shows a higher precision and a lower computational cost (for comparable accuracy) than a standard numerical scheme used in the nuclear industry, namely Rusanov's scheme. Finally, we assess the good behavior of the scheme when approximating vanishing phase solutions.

  5. Continuous Indoor Positioning Fusing WiFi, Smartphone Sensors and Landmarks

    Directory of Open Access Journals (Sweden)

    Zhi-An Deng

    2016-09-01

    Full Text Available To exploit the complementary strengths of WiFi positioning, pedestrian dead reckoning (PDR, and landmarks, we propose a novel fusion approach based on an extended Kalman filter (EKF. For WiFi positioning, unlike previous fusion approaches setting measurement noise parameters empirically, we deploy a kernel density estimation-based model to adaptively measure the related measurement noise statistics. Furthermore, a trusted area of WiFi positioning defined by fusion results of previous step and WiFi signal outlier detection are exploited to reduce computational cost and improve WiFi positioning accuracy. For PDR, we integrate a gyroscope, an accelerometer, and a magnetometer to determine the user heading based on another EKF model. To reduce accumulation error of PDR and enable continuous indoor positioning, not only the positioning results but also the heading estimations are recalibrated by indoor landmarks. Experimental results in a realistic indoor environment show that the proposed fusion approach achieves substantial positioning accuracy improvement than individual positioning approaches including PDR and WiFi positioning.

  6. Coronary perfusion pressure and compression quality in maternal cardiopulmonary resuscitation in supine and left-lateral tilt positions: A prospective, crossover study using mannequins and swine models.

    Science.gov (United States)

    Dohi, Satoshi; Ichizuka, Kiyotake; Matsuoka, Ryu; Seo, Kohei; Nagatsuka, Masaaki; Sekizawa, Akihiko

    2017-09-01

    The risk of maternal and fetal mortality is high if cardiopulmonary arrest occurs during pregnancy. To assess the best position for maternal cardiopulmonary resuscitation (CPR), a prospective randomized crossover study was undertaken, involving basic life support mannequin-based simulation (BLS-MS) and a swine model of pulseless electrical activity (an unstable cardiac state) incorporating a fetal mannequin (PEA-FM). The BLS-MS (performed by certified rescuers) served to evaluate the quality of chest compressions in 30° left lateral tilt (LLT) and supine positions. Based on a 5-point scale, each rescuer subjectively graded their experience. The PEA-FM model was used to compare coronary perfusion pressure readings during CPR in supine, supine with left uterine displacement, 30° LLT, and 30° right lateral tilt positions. Compression rate and correctness of hand position, compression depth, and recoil were measures of compression quality (BLS-MS). Compared with LLT position, supine position enabled correct hand position (rate: 0.99 vs 0.88; p<0.05) and compression depth (rate: 0.76 vs 0.36; p<0.001) significantly more often. Moreover, BLS-MS rescuers found chest compressions significantly easier to perform with the mannequin in supine (vs LLT) position (difficulty score: 1.75 vs 3.95; p<0.001). In the PEA-FM study arm, supine position with left uterine displacement and right lateral tilt positions had the highest and lowest recorded coronary perfusion pressure readings, respectively. Supine position with left uterine displacement is optimal for maternal CPR. Copyright © 2017 The Author(s). Published by Elsevier B.V. All rights reserved.

  7. Modelling of the X , Y , Z positioning errors and uncertainty evaluation for the LNE’s mAFM using the Monte Carlo method

    International Nuclear Information System (INIS)

    Ceria, Paul; Ducourtieux, Sebastien; Boukellal, Younes; Feltin, Nicolas; Allard, Alexandre; Fischer, Nicolas

    2017-01-01

    In order to evaluate the uncertainty budget of the LNE’s mAFM, a reference instrument dedicated to the calibration of nanoscale dimensional standards, a numerical model has been developed to evaluate the measurement uncertainty of the metrology loop involved in the XYZ positioning of the tip relative to the sample. The objective of this model is to overcome difficulties experienced when trying to evaluate some uncertainty components which cannot be experimentally determined and more specifically, the one linked to the geometry of the metrology loop. The model is based on object-oriented programming and developed under Matlab. It integrates one hundred parameters that allow the control of the geometry of the metrology loop without using analytical formulae. The created objects, mainly the reference and the mobile prism and their mirrors, the interferometers and their laser beams, can be moved and deformed freely to take into account several error sources. The Monte Carlo method is then used to determine the positioning uncertainty of the instrument by randomly drawing the parameters according to their associated tolerances and their probability density functions (PDFs). The whole process follows Supplement 2 to ‘The Guide to the Expression of the Uncertainty in Measurement’ (GUM). Some advanced statistical tools like Morris design and Sobol indices are also used to provide a sensitivity analysis by identifying the most influential parameters and quantifying their contribution to the XYZ positioning uncertainty. The approach validated in the paper shows that the actual positioning uncertainty is about 6 nm. As the final objective is to reach 1 nm, we engage in a discussion to estimate the most effective way to reduce the uncertainty. (paper)

  8. Modelling of the X,Y,Z positioning errors and uncertainty evaluation for the LNE’s mAFM using the Monte Carlo method

    Science.gov (United States)

    Ceria, Paul; Ducourtieux, Sebastien; Boukellal, Younes; Allard, Alexandre; Fischer, Nicolas; Feltin, Nicolas

    2017-03-01

    In order to evaluate the uncertainty budget of the LNE’s mAFM, a reference instrument dedicated to the calibration of nanoscale dimensional standards, a numerical model has been developed to evaluate the measurement uncertainty of the metrology loop involved in the XYZ positioning of the tip relative to the sample. The objective of this model is to overcome difficulties experienced when trying to evaluate some uncertainty components which cannot be experimentally determined and more specifically, the one linked to the geometry of the metrology loop. The model is based on object-oriented programming and developed under Matlab. It integrates one hundred parameters that allow the control of the geometry of the metrology loop without using analytical formulae. The created objects, mainly the reference and the mobile prism and their mirrors, the interferometers and their laser beams, can be moved and deformed freely to take into account several error sources. The Monte Carlo method is then used to determine the positioning uncertainty of the instrument by randomly drawing the parameters according to their associated tolerances and their probability density functions (PDFs). The whole process follows Supplement 2 to ‘The Guide to the Expression of the Uncertainty in Measurement’ (GUM). Some advanced statistical tools like Morris design and Sobol indices are also used to provide a sensitivity analysis by identifying the most influential parameters and quantifying their contribution to the XYZ positioning uncertainty. The approach validated in the paper shows that the actual positioning uncertainty is about 6 nm. As the final objective is to reach 1 nm, we engage in a discussion to estimate the most effective way to reduce the uncertainty.

  9. Future directions for positive body image research.

    Science.gov (United States)

    Halliwell, Emma

    2015-06-01

    The emergence of positive body image research during the last 10 years represents an important shift in the body image literature. The existing evidence provides a strong empirical basis for the study of positive body image and research has begun to address issues of age, gender, ethnicity, culture, development, and intervention in relation to positive body image. This article briefly reviews the existing evidence before outlining directions for future research. Specifically, six areas for future positive body image research are outlined: (a) conceptualization, (b) models, (c) developmental factors, (d) social interactions, (e) cognitive processing style, and (f) interventions. Finally, the potential role of positive body image as a protective factor within the broader body image literature is discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. PerPos: A Platform Providing Cloud Services for Pervasive Positioning

    DEFF Research Database (Denmark)

    Blunck, Henrik; Godsk, Torben; Grønbæk, Kaj

    2010-01-01

    -based building model manager that allows users to manage building models stored in the PerPos cloud for annotation, logging, and navigation purposes. A core service in the PerPos platform is sensor fusion for positioning that makes it seamless and efficient to combine a rich set of position sensors to obtain...

  11. Multi-scale textural feature extraction and particle swarm optimization based model selection for false positive reduction in mammography.

    Science.gov (United States)

    Zyout, Imad; Czajkowska, Joanna; Grzegorzek, Marcin

    2015-12-01

    The high number of false positives and the resulting number of avoidable breast biopsies are the major problems faced by current mammography Computer Aided Detection (CAD) systems. False positive reduction is not only a requirement for mass but also for calcification CAD systems which are currently deployed for clinical use. This paper tackles two problems related to reducing the number of false positives in the detection of all lesions and masses, respectively. Firstly, textural patterns of breast tissue have been analyzed using several multi-scale textural descriptors based on wavelet and gray level co-occurrence matrix. The second problem addressed in this paper is the parameter selection and performance optimization. For this, we adopt a model selection procedure based on Particle Swarm Optimization (PSO) for selecting the most discriminative textural features and for strengthening the generalization capacity of the supervised learning stage based on a Support Vector Machine (SVM) classifier. For evaluating the proposed methods, two sets of suspicious mammogram regions have been used. The first one, obtained from Digital Database for Screening Mammography (DDSM), contains 1494 regions (1000 normal and 494 abnormal samples). The second set of suspicious regions was obtained from database of Mammographic Image Analysis Society (mini-MIAS) and contains 315 (207 normal and 108 abnormal) samples. Results from both datasets demonstrate the efficiency of using PSO based model selection for optimizing both classifier hyper-parameters and parameters, respectively. Furthermore, the obtained results indicate the promising performance of the proposed textural features and more specifically, those based on co-occurrence matrix of wavelet image representation technique. Copyright © 2015 Elsevier Ltd. All rights reserved.

  12. Importance of Lorentz structure in the parton model: Target mass corrections, transverse momentum dependence, positivity bounds

    International Nuclear Information System (INIS)

    D'Alesio, U.; Leader, E.; Murgia, F.

    2010-01-01

    We show that respecting the underlying Lorentz structure in the parton model has very strong consequences. Failure to insist on the correct Lorentz covariance is responsible for the existence of contradictory results in the literature for the polarized structure function g 2 (x), whereas with the correct imposition we are able to derive the Wandzura-Wilczek relation for g 2 (x) and the target-mass corrections for polarized deep inelastic scattering without recourse to the operator product expansion. We comment briefly on the problem of threshold behavior in the presence of target-mass corrections. Careful attention to the Lorentz structure has also profound implications for the structure of the transverse momentum dependent parton densities often used in parton model treatments of hadron production, allowing the k T dependence to be derived explicitly. It also leads to stronger positivity and Soffer-type bounds than usually utilized for the collinear densities.

  13. Construction and modelling of an inducible positive feedback loop stably integrated in a mammalian cell-line.

    Directory of Open Access Journals (Sweden)

    Velia Siciliano

    2011-06-01

    Full Text Available Understanding the relationship between topology and dynamics of transcriptional regulatory networks in mammalian cells is essential to elucidate the biology of complex regulatory and signaling pathways. Here, we characterised, via a synthetic biology approach, a transcriptional positive feedback loop (PFL by generating a clonal population of mammalian cells (CHO carrying a stable integration of the construct. The PFL network consists of the Tetracycline-controlled transactivator (tTA, whose expression is regulated by a tTA responsive promoter (CMV-TET, thus giving rise to a positive feedback. The same CMV-TET promoter drives also the expression of a destabilised yellow fluorescent protein (d2EYFP, thus the dynamic behaviour can be followed by time-lapse microscopy. The PFL network was compared to an engineered version of the network lacking the positive feedback loop (NOPFL, by expressing the tTA mRNA from a constitutive promoter. Doxycycline was used to repress tTA activation (switch off, and the resulting changes in fluorescence intensity for both the PFL and NOPFL networks were followed for up to 43 h. We observed a striking difference in the dynamics of the PFL and NOPFL networks. Using non-linear dynamical models, able to recapitulate experimental observations, we demonstrated a link between network topology and network dynamics. Namely, transcriptional positive autoregulation can significantly slow down the "switch off" times, as compared to the non-autoregulated system. Doxycycline concentration can modulate the response times of the PFL, whereas the NOPFL always switches off with the same dynamics. Moreover, the PFL can exhibit bistability for a range of Doxycycline concentrations. Since the PFL motif is often found in naturally occurring transcriptional and signaling pathways, we believe our work can be instrumental to characterise their behaviour.

  14. Construction and modelling of an inducible positive feedback loop stably integrated in a mammalian cell-line.

    Science.gov (United States)

    Siciliano, Velia; Menolascina, Filippo; Marucci, Lucia; Fracassi, Chiara; Garzilli, Immacolata; Moretti, Maria Nicoletta; di Bernardo, Diego

    2011-06-01

    Understanding the relationship between topology and dynamics of transcriptional regulatory networks in mammalian cells is essential to elucidate the biology of complex regulatory and signaling pathways. Here, we characterised, via a synthetic biology approach, a transcriptional positive feedback loop (PFL) by generating a clonal population of mammalian cells (CHO) carrying a stable integration of the construct. The PFL network consists of the Tetracycline-controlled transactivator (tTA), whose expression is regulated by a tTA responsive promoter (CMV-TET), thus giving rise to a positive feedback. The same CMV-TET promoter drives also the expression of a destabilised yellow fluorescent protein (d2EYFP), thus the dynamic behaviour can be followed by time-lapse microscopy. The PFL network was compared to an engineered version of the network lacking the positive feedback loop (NOPFL), by expressing the tTA mRNA from a constitutive promoter. Doxycycline was used to repress tTA activation (switch off), and the resulting changes in fluorescence intensity for both the PFL and NOPFL networks were followed for up to 43 h. We observed a striking difference in the dynamics of the PFL and NOPFL networks. Using non-linear dynamical models, able to recapitulate experimental observations, we demonstrated a link between network topology and network dynamics. Namely, transcriptional positive autoregulation can significantly slow down the "switch off" times, as compared to the non-autoregulated system. Doxycycline concentration can modulate the response times of the PFL, whereas the NOPFL always switches off with the same dynamics. Moreover, the PFL can exhibit bistability for a range of Doxycycline concentrations. Since the PFL motif is often found in naturally occurring transcriptional and signaling pathways, we believe our work can be instrumental to characterise their behaviour.

  15. Resources that promote positive youth development

    Directory of Open Access Journals (Sweden)

    Martha Frías Armenta

    2016-12-01

    Full Text Available Adolescence is a crucial developmental phase that shapes people´s futures. Positive psychology investigates the variables that promote the optimal development of human beings. It recognizes that all children and adolescents have strengths that will develop once these strengths match the resources needed to achieve this in the various settings in which they live. The aim of this study was to analyze from a multidisciplinary perspective (e.g. psychological, sociological, and economic the effect of resources that promote positive youth development. The sample consisted of 200 middle school students (15 to 19 years. EQS statistical software was used to analyse a structural equation model in which the study variables comprised 4 factors: one for each resource (economic, psychological, sociological, and one for positive youth development. The results showed a direct association between psychological and social resources and positive development, and between social resources and psychological assets. However, no association was found between economic resources and positive youth development. These results suggest that the main influences on positive youth development are psychological and social resources.

  16. Personal and Environmental Resources Mediate the Positivity-Emotional Dysfunction Relationship.

    Science.gov (United States)

    Lehrer, H Matthew; Janus, Katherine C; Gloria, Christian T; Steinhardt, Mary A

    2017-03-01

    We investigated the relationships among positivity, perceived personal and environmental resources, and emotional dysfunction in adolescent girls. We hypothesized that perceived resources would mediate the relationship between positivity and emotional dysfunction. Participants (N = 510) attending an all-girls public school completed a survey assessing emotional dysfunction (depressive symptoms and perceived stress), positivity (positive/negative emotions), and personal/ environmental resources (resilience, hope, percent adaptive coping, community connectedness, social support, and school connectedness). Perceived resources were combined into one latent variable, and structural equation modeling tested the mediating effect of perceived resources on the relationship between positivity and emotional dysfunction. The model accounted for 63% of the variance in emotional dysfunction. Positivity exerted a significant direct effect on emotional dysfunction (β = -.14, p emotional dysfunction is primarily but not entirely mediated by perceived personal and environmental resources. Schools should consider strategies to enhance experiences of positive emotions and/or decrease experiences of negative emotions, in conjunction with encouraging student awareness and development of personal and environmental resources.

  17. Positive projections of symmetric matrices and Jordan algebras

    DEFF Research Database (Denmark)

    Fuglede, Bent; Jensen, Søren Tolver

    2013-01-01

    An elementary proof is given that the projection from the space of all symmetric p×p matrices onto a linear subspace is positive if and only if the subspace is a Jordan algebra. This solves a problem in a statistical model.......An elementary proof is given that the projection from the space of all symmetric p×p matrices onto a linear subspace is positive if and only if the subspace is a Jordan algebra. This solves a problem in a statistical model....

  18. Tensor Dictionary Learning for Positive Definite Matrices.

    Science.gov (United States)

    Sivalingam, Ravishankar; Boley, Daniel; Morellas, Vassilios; Papanikolopoulos, Nikolaos

    2015-11-01

    Sparse models have proven to be extremely successful in image processing and computer vision. However, a majority of the effort has been focused on sparse representation of vectors and low-rank models for general matrices. The success of sparse modeling, along with popularity of region covariances, has inspired the development of sparse coding approaches for these positive definite descriptors. While in earlier work, the dictionary was formed from all, or a random subset of, the training signals, it is clearly advantageous to learn a concise dictionary from the entire training set. In this paper, we propose a novel approach for dictionary learning over positive definite matrices. The dictionary is learned by alternating minimization between sparse coding and dictionary update stages, and different atom update methods are described. A discriminative version of the dictionary learning approach is also proposed, which simultaneously learns dictionaries for different classes in classification or clustering. Experimental results demonstrate the advantage of learning dictionaries from data both from reconstruction and classification viewpoints. Finally, a software library is presented comprising C++ binaries for all the positive definite sparse coding and dictionary learning approaches presented here.

  19. Predictors for benign paroxysmal positional vertigo with positive Dix–Hallpike test

    Directory of Open Access Journals (Sweden)

    Noda K

    2011-12-01

    Full Text Available Kazutaka Noda, Masatomi Ikusaka, Yoshiyuki Ohira, Toshihiko Takada, Tomoko TsukamotoDepartment of General Medicine, Chiba University Hospital, Chiba, JapanObjective: Patient medical history is important for making a diagnosis of causes of dizziness, but there have been no studies on the diagnostic value of individual items in the history. This study was performed to identify and validate useful questions for suspecting a diagnosis of benign paroxysmal positional vertigo (BPPV.Methods: Construction and validation of a disease prediction model was performed at the outpatient clinic in the Department of General Medicine of Chiba University Hospital. Patients with dizziness were enrolled (145 patients for construction of the disease prediction model and 61 patients for its validation. This study targeted BPPV of the posterior semicircular canals only with a positive Dix–Hallpike test (DHT + BPPV to avoid diagnostic ambiguity. Binomial logistic regression analysis was performed to identify the items that were useful for diagnosis or exclusion of DHT + BPPV.Results: Twelve patients from the derivation set and six patients from the validation set had DHT + BPPV. Binomial logistic regression analysis selected a "duration of dizziness ≤15 seconds" and "onset when turning over in bed" as independent predictors of DHT + BPPV with an odds ratio (95% confidence interval of 4.36 (1.18–16.19 and 10.17 (2.49–41.63, respectively. Affirmative answers to both questions yielded a likelihood ratio of 6.81 (5.11–9.10 for diagnosis of DHT + BPPV, while negative answers to both had a likelihood ratio of 0.19 (0.08–0.47.Conclusion: A "duration of dizziness ≤15 seconds" and "onset when turning over in bed" were the two most important questions among various historical features of BPPV.Keywords: benign paroxysmal positional vertigo, likelihood ratio, diagnosis, screening, prediction rules

  20. Positive real balancing for nonlinear systems

    NARCIS (Netherlands)

    Ionescu, Tudor C.; Scherpen, Jacquelien M.A.; Ciuprina, G; Ioan, D

    2007-01-01

    We extend the positive real balancing procedure for passive linear systems to the nonlinear systems case. We show that, just like in the linear case, model reduction based on this technique preserves passivity.

  1. Analytical expression for position sensitivity of linear response beam position monitor having inter-electrode cross talk

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, Mukesh, E-mail: mukeshk@rrcat.gov.in [Beam Diagnostics Section, Indus Operations, Beam Dynamics & Diagnostics Division, Raja Ramanna Centre for Advanced Technology, Indore, 452013 MP (India); Homi Bhabha National Institute, Training School Complex, Anushakti Nagar, Mumbai 400 094 (India); Ojha, A.; Garg, A.D.; Puntambekar, T.A. [Beam Diagnostics Section, Indus Operations, Beam Dynamics & Diagnostics Division, Raja Ramanna Centre for Advanced Technology, Indore, 452013 MP (India); Senecha, V.K. [Homi Bhabha National Institute, Training School Complex, Anushakti Nagar, Mumbai 400 094 (India); Ion Source Lab., Proton Linac & Superconducting Cavities Division, Raja Ramanna Centre for Advanced Technology, Indore, 452013 MP (India)

    2017-02-01

    According to the quasi electrostatic model of linear response capacitive beam position monitor (BPM), the position sensitivity of the device depends only on the aperture of the device and it is independent of processing frequency and load impedance. In practice, however, due to the inter-electrode capacitive coupling (cross talk), the actual position sensitivity of the device decreases with increasing frequency and load impedance. We have taken into account the inter-electrode capacitance to derive and propose a new analytical expression for the position sensitivity as a function of frequency and load impedance. The sensitivity of a linear response shoe-box type BPM has been obtained through simulation using CST Studio Suite to verify and confirm the validity of the new analytical equation. Good agreement between the simulation results and the new analytical expression suggest that this method can be exploited for proper designing of BPM.

  2. States of light positive particles in metals

    International Nuclear Information System (INIS)

    Klamt, A.G.

    1987-01-01

    The states of light positively charged particles in metals are treated in tight-binding approximation. The polaron states of the particles are investigated. The 'molecular crystal model' and an interstitial model' are treated. Moreover, the particle-lattice coupling of excited particles is treated for fcc and bcc lattices. (BHO)

  3. The Ether Wind and the Global Positioning System.

    Science.gov (United States)

    Muller, Rainer

    2000-01-01

    Explains how students can perform a refutation of the ether theory using information from the Global Positioning System (GPS). Discusses the functioning of the GPS, qualitatively describes how position determination would be affected by an ether wind, and illustrates the pertinent ideas with a simple quantitative model. (WRM)

  4. The Research of Indoor Positioning Based on Double-peak Gaussian Model

    Directory of Open Access Journals (Sweden)

    Lina Chen

    2014-04-01

    Full Text Available Location fingerprinting using Wi-Fi signals has been very popular and is a well accepted indoor positioning method. The key issue of the fingerprinting approach is generating the fingerprint radio map. Limited by the practical workload, only a few samples of the received signal strength are collected at each reference point. Unfortunately, fewer samples cannot accurately represent the actual distribution of the signal strength from each access point. This study finds most Wi- Fi signals have two peaks. According to the new finding, a double-peak Gaussian arithmetic is proposed to generate a fingerprint radio map. This approach requires little time to receive WiFi signals and it easy to estimate the parameters of the double-peak Gaussian function. Compared to the Gaussian function and histogram method to generate a fingerprint radio map, this method better approximates the occurrence signal distribution. This paper also compared the positioning accuracy using K-Nearest Neighbour theory for three radio maps, the test results show that the positioning distance error utilizing the double-peak Gaussian function is better than the other two methods.

  5. The efficient model to define a single light source position by use of high dynamic range image of 3D scene

    Science.gov (United States)

    Wang, Xu-yang; Zhdanov, Dmitry D.; Potemin, Igor S.; Wang, Ying; Cheng, Han

    2016-10-01

    One of the challenges of augmented reality is a seamless combination of objects of the real and virtual worlds, for example light sources. We suggest a measurement and computation models for reconstruction of light source position. The model is based on the dependence of luminance of the small size diffuse surface directly illuminated by point like source placed at a short distance from the observer or camera. The advantage of the computational model is the ability to eliminate the effects of indirect illumination. The paper presents a number of examples to illustrate the efficiency and accuracy of the proposed method.

  6. An Exploratory Path Model of the Relationships between Positive and Negative Adaptation to Cancer on Quality of Life among non-Hodgkin Lymphoma Survivors

    Science.gov (United States)

    Smith, Sophia K.; Zimmer, Catherine; Crandell, Jamie; Jenerette, Coretta M.; Bailey, Donald E.; Zimmerman, Sheryl; Mayer, Deborah K.

    2015-01-01

    Purpose Adaptation is an ongoing, cognitive process with continuous appraisal of the cancer experience by the survivor. This exploratory study tested a path model examining the personal (demographic, disease, and psychosocial) characteristics associated with quality of life (QOL) and whether or not adaptation to living with cancer may mediate these effects. Methods This study employed path analysis to estimate adaptation to cancer. A cross sectional sample of NHL survivors (N=750) was used to test the model. Eligible participants were ≥18 years, at least two years post-diagnosis, and living with or without active disease. Results 68% of the variance was accounted for in QOL. The strongest effect (−0.596) was direct by negative adaptation, approximately three times that of positive adaptation (0.193). The strongest demographic total effects on QOL were age and social support; adaptation compared to those ≥65. Of the disease characteristics, comorbidity score had the strongest direct effect on QOL; each additional comorbidity was associated with a 0.309 standard deviation decline on QOL. There were no fully mediated effects through positive adaptation alone. Our exploratory findings support the coexistence of positive and negative adaptations perception as mediators of personal characteristics of the cancer experience. Negative adaptation can affect QOL in a positive way. Cancer survivorship is simultaneously shaped by both positive and negative adaptation with future research and implications for practice aimed at improving QOL. PMID:25751114

  7. Radiological characterisation by means of 3D-laser modelling and positioning of measurements

    International Nuclear Information System (INIS)

    Hedvall, Robert; Johansson, Patrik; Erixon, Peter; Ekenborg, Fredrik; Quanhong, Feng

    2012-01-01

    AB SVAFO is a nuclear waste technology and decommissioning company based in Sweden in the scenic surroundings of Studsvik on the Baltic coast. SVAFO is owned by the Swedish nuclear power industry. MultiInfo 3D Laser Scan Solution AB is a technical consult company focusing on the development and solution of 3D laser scanning techniques and its applications in different fields. For better viewing we are using a 3D-laser modelling of a building, national coordinates and using radiological measurements from a database. It is then possible to visualize the contamination situation in the whole building using a CAD-program. The results will be used for the upcoming R2-reactor decommissioning and for visualisation of dose rates and contamination levels in other nuclear buildings. For better documentation of radioactivity distribution of a decommissioned facility any object in a building can be accurately measured in 3D and visualized in 3D-laser image in a CAD program (e.g. AutoCAD), and then link to a database (e.g. SVALA), which have stored the measurements of radioactivity by other tools (e.g. RFID-tags). The position of any measured object can also be identified in 3D model and laser image, so the situation of contamination levels and distribution can be monitored and visualized in 3D. The results will be used for visualisation of dose rates and contamination levels in other nuclear buildings. AB SVAFO's main business is to take care of formerly state-owned spent nuclear waste at the site, including small amounts of nuclear fuel. Buildings are also included, mainly nuclear waste storage buildings and a research reactor. Some buildings have already been decommissioned with results of contamination shown in long and not very clear tables. With 3D-modelling the results are shown more clear. (authors)

  8. Fathers, Mothers, Marriages, and Children: Toward a Contextual Model of Positive Paternal Influence

    OpenAIRE

    Rodriguez, Ariel

    2000-01-01

    This research explored positive paternal involvement in the lives of children within the broader familial context of marital dynamics and positive maternal involvement. The National Survey of Families and Households (NSFH) was used to obtain a longitudinal subsample of 582 first-married couples, as well as the wide range of variables necessary to explore this broader context of paternal influence. Three research questions guided the study: (I) What is the unique contribution of positive pater...

  9. Dynamic Characteristics of Mechanical Ventilation System of Double Lungs with Bi-Level Positive Airway Pressure Model

    Directory of Open Access Journals (Sweden)

    Dongkai Shen

    2016-01-01

    Full Text Available In recent studies on the dynamic characteristics of ventilation system, it was considered that human had only one lung, and the coupling effect of double lungs on the air flow can not be illustrated, which has been in regard to be vital to life support of patients. In this article, to illustrate coupling effect of double lungs on flow dynamics of mechanical ventilation system, a mathematical model of a mechanical ventilation system, which consists of double lungs and a bi-level positive airway pressure (BIPAP controlled ventilator, was proposed. To verify the mathematical model, a prototype of BIPAP system with a double-lung simulators and a BIPAP ventilator was set up for experimental study. Lastly, the study on the influences of key parameters of BIPAP system on dynamic characteristics was carried out. The study can be referred to in the development of research on BIPAP ventilation treatment and real respiratory diagnostics.

  10. From Text to Political Positions: Text analysis across disciplines

    NARCIS (Netherlands)

    Kaal, A.R.; Maks, I.; van Elfrinkhof, A.M.E.

    2014-01-01

    ABSTRACT From Text to Political Positions addresses cross-disciplinary innovation in political text analysis for party positioning. Drawing on political science, computational methods and discourse analysis, it presents a diverse collection of analytical models including pure quantitative and

  11. Positional instability analysis of tokamak plasmas by ERATO

    International Nuclear Information System (INIS)

    Kumagai, Michikazu; Tsunematsu, Toshihide; Tokuda, Shinji; Takeda, Tatsuoki

    1983-06-01

    The stability of axisymmetric modes of a tokamak plasma(positional instabilities) is analyzed for the Solov'ev equilibrium by using the linear ideal MHD code ERATO-J. The dependence of the stability on various parameters, i.e., the ellipticity and triangularity of the plasma cross-section, the aspect ratio, the safety factor at the magnetic axis, and the distance between the plasma and a conducting shell is investigated. Comparison of the results with those by the rigid model shows that the stability condition derived from the rigid model in terms of the decay index(n-index) of the external equilibrating field is a good approximation for the plasma with small triangular deformation. Also the results are compared with those of the rigid displacement model and applicability of the various models on the positional instability analyses is discussed. (author)

  12. Advanced control of piezoelectric micro-nano-positioning systems

    CERN Document Server

    Xu, Qingsong

    2016-01-01

    This book explores emerging methods and algorithms that enable precise control of micro-/nano-positioning systems. The text describes three control strategies: hysteresis-model-based feedforward control and hysteresis-model-free feedback control based on and free from state observation. Each paradigm receives dedicated attention within a particular part of the text. Readers are shown how to design, validate and apply a variety of new control approaches in micromanipulation: hysteresis modelling, discrete-time sliding-mode control and model-reference adaptive control. Experimental results are provided throughout and build up to a detailed treatment of practical applications in the fourth part of the book. The applications focus on control of piezoelectric grippers. Advanced Control of Piezoelectric Micro-/Nano-Positioning Systems will assist academic researchers and practising control and mechatronics engineers interested in suppressing sources of nonlinearity such as hysteresis and drift when combining positi...

  13. Stochastic models in the DORIS position time series: estimates for IDS contribution to ITRF2014

    Science.gov (United States)

    Klos, Anna; Bogusz, Janusz; Moreaux, Guilhem

    2017-11-01

    This paper focuses on the investigation of the deterministic and stochastic parts of the Doppler Orbitography and Radiopositioning Integrated by Satellite (DORIS) weekly time series aligned to the newest release of ITRF2014. A set of 90 stations was divided into three groups depending on when the data were collected at an individual station. To reliably describe the DORIS time series, we employed a mathematical model that included the long-term nonlinear signal, linear trend, seasonal oscillations and a stochastic part, all being estimated with maximum likelihood estimation. We proved that the values of the parameters delivered for DORIS data are strictly correlated with the time span of the observations. The quality of the most recent data has significantly improved. Not only did the seasonal amplitudes decrease over the years, but also, and most importantly, the noise level and its type changed significantly. Among several tested models, the power-law process may be chosen as the preferred one for most of the DORIS data. Moreover, the preferred noise model has changed through the years from an autoregressive process to pure power-law noise with few stations characterised by a positive spectral index. For the latest observations, the medians of the velocity errors were equal to 0.3, 0.3 and 0.4 mm/year, respectively, for the North, East and Up components. In the best cases, a velocity uncertainty of DORIS sites of 0.1 mm/year is achievable when the appropriate coloured noise model is taken into consideration.

  14. Inter-organizational ties and total customer solution strategic positioning from delta model: a research about dyad supplier-client on B2B.

    Directory of Open Access Journals (Sweden)

    Mateus Tavares da Silva Cozer

    2008-12-01

    Full Text Available The basic issue of the strategic management process is to determine how firmsachieve and sustain competitive advantage. In this sense, this paper aims toanalyze the links between a firm’s competitive positioning and the inter-organizationalties created with its customers as a way to achieve sustainable competitiveadvantage. The focus of the study is to describe the competitive process accordingto the Delta Model developed by Hax and Wilde II, which proposes three strategicpositioning options. The study describes the process of competitive positioningthrough inter-organizational ties and customer bonding under a strategic marketingperspective. From a methodological point of view, a literature review wasdone focusing on two theoretical subjects: competitive positioning and strategicmarketing. Finally the results of an empiric research on a public relations companyare presented. The study´s contribution is providing empirical support forthe Delta Model.

  15. Positive School Leadership: Building Capacity and Strengthening Relationships

    Science.gov (United States)

    Murphy, Joseph F.; Louis, Karen Seashore

    2018-01-01

    This landmark book translates positive and asset-based understandings of organizations to develop a powerful model of school leadership that is grounded in both existing research and the complexities of life in schools. The authors--both senior scholars in educational leadership--apply insights from positive psychology to the role and function of…

  16. Kuramoto model of coupled oscillators with positive and negative coupling parameters: an example of conformist and contrarian oscillators.

    Science.gov (United States)

    Hong, Hyunsuk; Strogatz, Steven H

    2011-02-04

    We consider a generalization of the Kuramoto model in which the oscillators are coupled to the mean field with random signs. Oscillators with positive coupling are "conformists"; they are attracted to the mean field and tend to synchronize with it. Oscillators with negative coupling are "contrarians"; they are repelled by the mean field and prefer a phase diametrically opposed to it. The model is simple and exactly solvable, yet some of its behavior is surprising. Along with the stationary states one might have expected (a desynchronized state, and a partially-synchronized state, with conformists and contrarians locked in antiphase), it also displays a traveling wave, in which the mean field oscillates at a frequency different from the population's mean natural frequency.

  17. Digital control of plasma position in Damavand tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Emami, M.; Babazadeh, A.R.; Roshan, M.V.; Memarzadeh, M.; Habibi, H. [Atomic Energy Organization of Iran (AEOI), Tehran (Iran, Islamic Republic of). Nuclear Fusion Research Center. Plasma Physics Lab.

    2002-03-01

    Plasma position control is one of the important issues in the design and operation of tokamak fusion research device. Since a tokamak is basically an electrical system consisting of power supplies, coils, plasma and eddy currents, a model in which these components are treated as an electrical circuits is used in designing Damavand plasma position control system. This model is used for the simulation of the digital control system and its parameters have been verified experimentally. In this paper, the performance of a high-speed digital controller as well as a simulation study and its application to the Damavand tokamak is discussed. (author)

  18. The Influences of Quantum Coherence on the Positive Work and the Efficiency of Quantum Heat Engine with Working Substance of Two-Qubit Heisenberg XXX Model

    Science.gov (United States)

    Peng, Hu-Ping; Fang, Mao-Fa; Yu, Min; Zou, Hong-Mei

    2018-03-01

    We study the influences of quantum coherence on the positive work and the efficiency of quantum heat engine (QHE) based on working substance of two-qubit Heisenberg model under a constant external magnetic field. By using analytical and numerical solution, we give the relation expressions for both the positive work and the efficiency with quantum coherence, and in detail discuss the effects of the quantum coherence on the positive work and the efficiency of QHE in the absence or presence of external magnetic field, respectively.

  19. The Influences of Quantum Coherence on the Positive Work and the Efficiency of Quantum Heat Engine with Working Substance of Two-Qubit Heisenberg XXX Model

    Science.gov (United States)

    Peng, Hu-Ping; Fang, Mao-Fa; Yu, Min; Zou, Hong-Mei

    2018-06-01

    We study the influences of quantum coherence on the positive work and the efficiency of quantum heat engine (QHE) based on working substance of two-qubit Heisenberg model under a constant external magnetic field. By using analytical and numerical solution, we give the relation expressions for both the positive work and the efficiency with quantum coherence, and in detail discuss the effects of the quantum coherence on the positive work and the efficiency of QHE in the absence or presence of external magnetic field, respectively.

  20. Positive Technologies for Understanding and Promoting Positive Emotions.

    Science.gov (United States)

    Baños, Rosa María; Carrillo, Alba; Etchemendy, Ernestina; Botella, Cristina

    2017-10-26

    Information and Communication Technologies (ICTs) have become increasingly present in our lives, and their use has spread considerably. This paper presents a review of the way ICTs can help practitioners and researchers to study, promote, and train positive emotions. It is framed within the field of Positive Technologies: the applied scientific approach to the study of the use of technology to improve the quality of personal experience, with the goal of increasing wellbeing. First, the article presents an introduction to the topic of technologies and positive emotions. Then, it describes how ICTs can aid in monitoring, assessing, promoting, modifying, and training positive emotions. Finally, implications and future directions of the role of Positive Technologies in positive emotions are discussed. The authors conclude that, in the near future, Positive Technologies and the field of positive emotions will interact synergistically, producing an exponential growth in the understanding and promotion of positive emotions.

  1. The selective positive allosteric M1 muscarinic receptor modulator PQCA attenuates learning and memory deficits in the Tg2576 Alzheimer's disease mouse model.

    Science.gov (United States)

    Puri, Vanita; Wang, Xiaohai; Vardigan, Joshua D; Kuduk, Scott D; Uslaner, Jason M

    2015-01-01

    We have recently shown that the M1 muscarinic receptor positive allosteric modulator, PQCA, improves cognitive performance in rodents and non-human primates administered the muscarinic receptor antagonist scopolamine. The purpose of the present experiments was to characterize the effects of PQCA in a model more relevant to the disease pathology of Alzheimer's disease. Tg2576 transgenic mice that have elevated Aβ were tested in the novel object recognition task to characterize recognition memory as a function of age and treatment with the PQCA. The effects of PQCA were compared to the acetylcholinesterase inhibitor donepezil, the standard of care for Alzheimer's disease. In addition, the effect of co-administering PQCA and donepezil was evaluated. Aged Tg2576 mice demonstrated a deficit in recognition memory that was significantly attenuated by PQCA. The positive control donepezil also reversed the deficit. Furthermore, doses of PQCA and donepezil that were inactive on their own were found to improve recognition memory when given together. These studies suggest that M1 muscarinic receptor positive allosteric modulation can ameliorate memory deficits in disease relevant models of Alzheimer's disease. These data, combined with our previous findings demonstrating PQCA improves scopolamine-induced cognitive deficits in both rodents and non-human primates, suggest that M1 positive allosteric modulators have therapeutic potential for the treatment of Alzheimer's disease. Copyright © 2015 Elsevier B.V. All rights reserved.

  2. Large eddy simulations of the influence of piston position on the swirling flow in a model two-stroke diesel engine

    DEFF Research Database (Denmark)

    Obeidat, Anas Hassan MohD; Schnipper, Teis; Ingvorsen, Kristian Mark

    2014-01-01

    Purpose – The purpose of this paper is to study the effect of piston position on the in-cylinder swirling flow in a simplified model of a large two-stroke marine diesel engine. Design/methodology/approach – Large eddy simulations with four different models for the turbulent flow are used: a one...... qualitatively with port closure from a Lamb-Oseen vortex profile to a solid body rotation, while the axial velocity changes from a wake-like profile to a jet-like profile. The numerical results are compared with particle image velocimetry measurements, and in general, the authors find a good agreement. Research...

  3. Time-order errors and standard-position effects in duration discrimination: An experimental study and an analysis by the sensation-weighting model.

    Science.gov (United States)

    Hellström, Åke; Rammsayer, Thomas H

    2015-10-01

    Studies have shown that the discriminability of successive time intervals depends on the presentation order of the standard (St) and the comparison (Co) stimuli. Also, this order affects the point of subjective equality. The first effect is here called the standard-position effect (SPE); the latter is known as the time-order error. In the present study, we investigated how these two effects vary across interval types and standard durations, using Hellström's sensation-weighting model to describe the results and relate them to stimulus comparison mechanisms. In Experiment 1, four modes of interval presentation were used, factorially combining interval type (filled, empty) and sensory modality (auditory, visual). For each mode, two presentation orders (St-Co, Co-St) and two standard durations (100 ms, 1,000 ms) were used; half of the participants received correctness feedback, and half of them did not. The interstimulus interval was 900 ms. The SPEs were negative (i.e., a smaller difference limen for St-Co than for Co-St), except for the filled-auditory and empty-visual 100-ms standards, for which a positive effect was obtained. In Experiment 2, duration discrimination was investigated for filled auditory intervals with four standards between 100 and 1,000 ms, an interstimulus interval of 900 ms, and no feedback. Standard duration interacted with presentation order, here yielding SPEs that were negative for standards of 100 and 1,000 ms, but positive for 215 and 464 ms. Our findings indicate that the SPE can be positive as well as negative, depending on the interval type and standard duration, reflecting the relative weighting of the stimulus information, as is described by the sensation-weighting model.

  4. Social Validity of a Positive Behavior Interventions and Support Model

    Science.gov (United States)

    Miramontes, Nancy Y.; Marchant, Michelle; Heath, Melissa Allen; Fischer, Lane

    2011-01-01

    As more schools turn to positive behavior interventions and support (PBIS) to address students' academic and behavioral problems, there is an increased need to adequately evaluate these programs for social relevance. The present study used social validation measures to evaluate a statewide PBIS initiative. Active consumers of the program were…

  5. Atmospheric pressure loading effects on Global Positioning System coordinate determinations

    Science.gov (United States)

    Vandam, Tonie M.; Blewitt, Geoffrey; Heflin, Michael B.

    1994-01-01

    Earth deformation signals caused by atmospheric pressure loading are detected in vertical position estimates at Global Positioning System (GPS) stations. Surface displacements due to changes in atmospheric pressure account for up to 24% of the total variance in the GPS height estimates. The detected loading signals are larger at higher latitudes where pressure variations are greatest; the largest effect is observed at Fairbanks, Alaska (latitude 65 deg), with a signal root mean square (RMS) of 5 mm. Out of 19 continuously operating GPS sites (with a mean of 281 daily solutions per site), 18 show a positive correlation between the GPS vertical estimates and the modeled loading displacements. Accounting for loading reduces the variance of the vertical station positions on 12 of the 19 sites investigated. Removing the modeled pressure loading from GPS determinations of baseline length for baselines longer than 6000 km reduces the variance on 73 of the 117 baselines investigated. The slight increase in variance for some of the sites and baselines is consistent with expected statistical fluctuations. The results from most stations are consistent with approximately 65% of the modeled pressure load being found in the GPS vertical position measurements. Removing an annual signal from both the measured heights and the modeled load time series leaves this value unchanged. The source of the remaining discrepancy between the modeled and observed loading signal may be the result of (1) anisotropic effects in the Earth's loading response, (2) errors in GPS estimates of tropospheric delay, (3) errors in the surface pressure data, or (4) annual signals in the time series of loading and station heights. In addition, we find that using site dependent coefficients, determined by fitting local pressure to the modeled radial displacements, reduces the variance of the measured station heights as well as or better than using the global convolution sum.

  6. Collective irrationality and positive feedback.

    Science.gov (United States)

    Nicolis, Stamatios C; Zabzina, Natalia; Latty, Tanya; Sumpter, David J T

    2011-04-26

    Recent experiments on ants and slime moulds have assessed the degree to which they make rational decisions when presented with a number of alternative food sources or shelter. Ants and slime moulds are just two examples of a wide range of species and biological processes that use positive feedback mechanisms to reach decisions. Here we use a generic, experimentally validated model of positive feedback between group members to show that the probability of taking the best of options depends crucially on the strength of feedback. We show how the probability of choosing the best option can be maximized by applying an optimal feedback strength. Importantly, this optimal value depends on the number of options, so that when we change the number of options the preference of the group changes, producing apparent "irrationalities". We thus reinterpret the idea that collectives show "rational" or "irrational" preferences as being a necessary consequence of the use of positive feedback. We argue that positive feedback is a heuristic which often produces fast and accurate group decision-making, but is always susceptible to apparent irrationality when studied under particular experimental conditions.

  7. Collective irrationality and positive feedback.

    Directory of Open Access Journals (Sweden)

    Stamatios C Nicolis

    Full Text Available Recent experiments on ants and slime moulds have assessed the degree to which they make rational decisions when presented with a number of alternative food sources or shelter. Ants and slime moulds are just two examples of a wide range of species and biological processes that use positive feedback mechanisms to reach decisions. Here we use a generic, experimentally validated model of positive feedback between group members to show that the probability of taking the best of options depends crucially on the strength of feedback. We show how the probability of choosing the best option can be maximized by applying an optimal feedback strength. Importantly, this optimal value depends on the number of options, so that when we change the number of options the preference of the group changes, producing apparent "irrationalities". We thus reinterpret the idea that collectives show "rational" or "irrational" preferences as being a necessary consequence of the use of positive feedback. We argue that positive feedback is a heuristic which often produces fast and accurate group decision-making, but is always susceptible to apparent irrationality when studied under particular experimental conditions.

  8. Prevalence and correlates of positive mental health in Chinese adolescents.

    Science.gov (United States)

    Guo, Cheng; Tomson, Göran; Keller, Christina; Söderqvist, Fredrik

    2018-02-17

    Studies investigating the prevalence of positive mental health and its correlates are still scarce compared to the studies on mental disorders, although there is growing interest of assessing positive mental health in adolescents. So far, no other study examining the prevalence and determinants of positive mental health in Chinese adolescents has been found. The purpose of this study was to assess the prevalence and correlates of positive mental health in Chinese adolescents. This cross-sectional study used a questionnaire including Mental Health Continuum-Short Form (MHC-SF) and items regarding multiple aspects of adolescent life. The sample involved a total of 5399 students from grade 8 and 10 in Weifang, China. Multivariate Logistic regression analyses were performed to evaluate the associations between potential indicators regarding socio-economic situations, life style, social support and school life and positive mental health and calculate odds ratios and 95% confidence intervals. More than half (57.4%) of the participants were diagnosed as flourishing. The correlated factors of positive mental health in regression models included gender, perceived family economy, the occurrence of sibling(s), satisfaction of self-appearance, physical activity, sleep quality, stress, social trust, desire to learn, support from teachers and parents as well as whether being bullied at school (OR ranging from 1.23 to 2.75). The Hosmer-Lemeshow p-value for the final regression model (0.45) indicated adequate model fit. This study gives the first overview on prevalence and correlates of positive mental health in Chinese adolescents. The prevalence of positive mental health in Chinese adolescents is higher than reported in most of the previous studies also using MHC-SF. Our findings suggest that adolescents with advantageous socio-economic situations, life style, social support and school life are experiencing better positive mental health than others.

  9. Are positive emotions just as "positive" across cultures?

    Science.gov (United States)

    Leu, Janxin; Wang, Jennifer; Koo, Kelly

    2011-08-01

    Whereas positive emotions and feeling unequivocally good may be at the heart of well-being among Westerners, positive emotions often carry negative associations within many Asian cultures. Based on a review of East-West cultural differences in dialectical emotions, or co-occurring positive and negative feelings, we predicted culture to influence the association between positive emotions and depression, but not the association between negative emotions and depression. As predicted, in a survey of over 600 European-, immigrant Asian-, and Asian American college students, positive emotions were associated with depression symptoms among European Americans and Asian Americans, but not immigrant Asians. Negative emotions were associated with depression symptoms among all three groups. We also found initial evidence that acculturation (i.e., nativity) may influence the role of positive emotions in depression: Asian Americans fell "in between" the two other groups. These findings suggest the importance of studying the role of culture in positive emotions and in positive psychology. The use of interventions based on promoting positive emotions in clinical psychology among Asian clients is briefly discussed. 2011 APA, all rights reserved

  10. Job analysis of the instrument and control technician position for the nuclear power plant maintenance personnel reliability model

    International Nuclear Information System (INIS)

    Siegel, A.I.; Bartter, W.D.; Federman, P.J.

    1983-08-01

    This report is one of a series that is planned to describe the results of a program undertaken by the Oak Ridge National Laboratory (ORNL) for the US Nuclear Regulatory Commission, Office of Nuclear Regulatory Research, to define, develop, validate, and disseminate a methodology for the quantitative prediction of human reliability in the conduct of maintenance tasks in nuclear power plants (NPPs). ORNL has subcontracted portions of this effort to Applied Psychological Services, Inc. This report on the job analysis of the Instrument and Control technician (NUREG/CR-3274) and a report on the job analysis of the electrician position (NUREG/CR-3275) comprise a part of the initial efforts of the development phase of this program. With the publication of the job analysis of the electrician position, the series of job analyses reports addressing nuclear power plant maintenance personnel will be complete. Subsequent reports addressing model development and validation are planned

  11. Methods for calculating the electrode position Jacobian for impedance imaging.

    Science.gov (United States)

    Boyle, A; Crabb, M G; Jehl, M; Lionheart, W R B; Adler, A

    2017-03-01

    Electrical impedance tomography (EIT) or electrical resistivity tomography (ERT) current and measure voltages at the boundary of a domain through electrodes. The movement or incorrect placement of electrodes may lead to modelling errors that result in significant reconstructed image artifacts. These errors may be accounted for by allowing for electrode position estimates in the model. Movement may be reconstructed through a first-order approximation, the electrode position Jacobian. A reconstruction that incorporates electrode position estimates and conductivity can significantly reduce image artifacts. Conversely, if electrode position is ignored it can be difficult to distinguish true conductivity changes from reconstruction artifacts which may increase the risk of a flawed interpretation. In this work, we aim to determine the fastest, most accurate approach for estimating the electrode position Jacobian. Four methods of calculating the electrode position Jacobian were evaluated on a homogeneous halfspace. Results show that Fréchet derivative and rank-one update methods are competitive in computational efficiency but achieve different solutions for certain values of contact impedance and mesh density.

  12. Are Parton Distributions Positive?

    CERN Document Server

    Forte, Stefano; Ridolfi, Giovanni; Altarelli, Guido; Forte, Stefano; Ridolfi, Giovanni

    1999-01-01

    We show that the naive positivity conditions on polarized parton distributions which follow from their probabilistic interpretation in the naive parton model are reproduced in perturbative QCD at the leading log level if the quark and gluon distribution are defined in terms of physical processes. We show how these conditions are modified at the next-to-leading level, and discuss their phenomenological implications, in particular in view of the determination of the polarized gluon distribution

  13. Are parton distributions positive?

    International Nuclear Information System (INIS)

    Forte, Stefano; Altarelli, Guido; Ridolfi, Giovanni

    1999-01-01

    We show that the naive positivity conditions on polarized parton distributions which follow from their probabilistic interpretation in the naive parton model are reproduced in perturbative QCD at the leading log level if the quark and gluon distribution are defined in terms of physical processes. We show how these conditions are modified at the next-to-leading level, and discuss their phenomenological implications, in particular in view of the determination of the polarized gluon distribution

  14. Positive media portrayals of obese persons: impact on attitudes and image preferences.

    Science.gov (United States)

    Pearl, Rebecca L; Puhl, Rebecca M; Brownell, Kelly D

    2012-11-01

    The purpose of this research was to assess the impact of nonstereotypical, positive media portrayals of obese persons on biased attitudes, as well as propose a change in media practices that could reduce public weight bias and consequent negative health outcomes for those who experience weight stigma. Two online experiments were conducted in which participants viewed either a stigmatizing or a positive photograph of an obese model. In Experiment 1 (N = 146), participants viewed a photograph of either a Caucasian or African American obese woman; in Experiment 2 (N = 145), participants viewed either a Caucasian male or female obese model. Multiple linear regression models were used to analyze outcomes for social distance attitudes toward the obese models depicted in the images, in addition to other negative attitudes and image preferences. Participants who viewed the stigmatizing images endorsed stronger social distance attitudes and more negative attitudes toward obese persons than participants who viewed the positive images, and there was a stronger preference for the positive images than the stigmatizing images. These results were consistent regardless of the race or gender of the obese model pictured. The findings indicate that more positive media portrayals of obese individuals may help reduce weight stigma and its associated negative health outcomes.

  15. Side-emitting fiber optic position sensor

    Science.gov (United States)

    Weiss, Jonathan D [Albuquerque, NM

    2008-02-12

    A side-emitting fiber optic position sensor and method of determining an unknown position of an object by using the sensor. In one embodiment, a concentrated beam of light source illuminates the side of a side-emitting fiber optic at an unknown axial position along the fiber's length. Some of this side-illuminated light is in-scattered into the fiber and captured. As the captured light is guided down the fiber, its intensity decreases due to loss from side-emission away from the fiber and from bulk absorption within the fiber. By measuring the intensity of light emitted from one (or both) ends of the fiber with a photodetector(s), the axial position of the light source is determined by comparing the photodetector's signal to a calibrated response curve, look-up table, or by using a mathematical model. Alternatively, the side-emitting fiber is illuminated at one end, while a photodetector measures the intensity of light emitted from the side of the fiber, at an unknown position. As the photodetector moves further away from the illuminated end, the detector's signal strength decreases due to loss from side-emission and/or bulk absorption. As before, the detector's signal is correlated to a unique position along the fiber.

  16. Beam Position Monitor Engineering

    International Nuclear Information System (INIS)

    Smith, Stephen R.

    1996-07-01

    The design of beam position monitors often involves challenging system design choices. Position transducers must be robust, accurate, and generate adequate position signal without unduly disturbing the beam. Electronics must be reliable and affordable, usually while meeting tough requirements on precision. accuracy, and dynamic range. These requirements may be difficult to achieve simultaneously, leading the designer into interesting opportunities for optimization or compromise. Some useful techniques and tools are shown. Both finite element analysis and analytic techniques will be used to investigate quasi-static aspects of electromagnetic fields such as the impedance of and the coupling of beam to striplines or buttons. Finite-element tools will be used to understand dynamic aspects of the electromagnetic fields of beams, such as wake-fields and transmission-line and cavity effects in vacuum-to-air feed through. Mathematical modeling of electrical signals through a processing chain will be demonstrated, in particular to illuminate areas where neither a pure time-domain nor a pure frequency-domain analysis is obviously advantageous. Emphasis will be on calculational techniques, in particular on using both time-domain and frequency domain approaches to the applicable parts of interesting problems

  17. Detecting positive quadrant dependence and positive function dependence

    NARCIS (Netherlands)

    Janic-Wróblewska, A.; Kallenberg, W.C.M.; Ledwina, T.

    2004-01-01

    There is a lot of interest in positive dependence going beyond linear correlation. In this paper three new rank tests for testing independence against positive dependence are introduced. The first one is directed on positive quadrant dependence, the second and third one concentrate on positive

  18. Detecting positive quadrant dependence and positive function dependence

    NARCIS (Netherlands)

    Janic-Wróblewska, A.; Kallenberg, W.C.M.; Ledwina, T.

    2003-01-01

    There is a lot of interest in positive dependence going beyond linear correlation. In this paper three new rank tests for testing independence against positive dependence are introduced. The first one is directed on positive quadrant dependence, the second and third one concentrate on positive

  19. A novel fusion methodology to bridge GPS outages for land vehicle positioning

    International Nuclear Information System (INIS)

    Chen, Wei; Li, Xu; Song, Xiang; Xu, Qimin; Li, Bin; Song, Xianghui

    2015-01-01

    Many intelligent transportation system applications require accurate, reliable, and continuous vehicle position information whether in open-sky environments or in Global Positioning System (GPS) denied environments. However, there remains a challenging task for land vehicles to achieve such positioning performance using low-cost sensors, especially microelectromechanical system (MEMS) sensors. In this paper, a novel and cost-effective fusion methodology to bridge GPS outages is proposed and applied in the Inertial Navigation System (INS)/GPS/ compass integrated positioning system. In the implementation of the proposed methodology, a key data preprocessing algorithm is first developed to eliminate the noise in inertial sensors in order to provide more accurate information for subsequent modeling. Then, a novel hybrid strategy incorporating the designed autoregressive model (AR model)-based forward estimator (ARFE) with Kalman filter (KF) is presented to predict the INS position errors during GPS outages. To verify the feasibility and effectiveness of the proposed methodology, real road tests with various scenarios were performed. The proposed methodology illustrates significant improvement in positioning accuracy during GPS outages. (paper)

  20. A Two-Factor Model Better Explains Heterogeneity in Negative Symptoms: Evidence from the Positive and Negative Syndrome Scale.

    Science.gov (United States)

    Jang, Seon-Kyeong; Choi, Hye-Im; Park, Soohyun; Jaekal, Eunju; Lee, Ga-Young; Cho, Young Il; Choi, Kee-Hong

    2016-01-01

    Acknowledging separable factors underlying negative symptoms may lead to better understanding and treatment of negative symptoms in individuals with schizophrenia. The current study aimed to test whether the negative symptoms factor (NSF) of the Positive and Negative Syndrome Scale (PANSS) would be better represented by expressive and experiential deficit factors, rather than by a single factor model, using confirmatory factor analysis (CFA). Two hundred and twenty individuals with schizophrenia spectrum disorders completed the PANSS; subsamples additionally completed the Brief Negative Symptom Scale (BNSS) and the Motivation and Pleasure Scale-Self-Report (MAP-SR). CFA results indicated that the two-factor model fit the data better than the one-factor model; however, latent variables were closely correlated. The two-factor model's fit was significantly improved by accounting for correlated residuals between N2 (emotional withdrawal) and N6 (lack of spontaneity and flow of conversation), and between N4 (passive social withdrawal) and G16 (active social avoidance), possibly reflecting common method variance. The two NSF factors exhibited differential patterns of correlation with subdomains of the BNSS and MAP-SR. These results suggest that the PANSS NSF would be better represented by a two-factor model than by a single-factor one, and support the two-factor model's adequate criterion-related validity. Common method variance among several items may be a potential source of measurement error under a two-factor model of the PANSS NSF.

  1. Electromagnetic field analysis and modeling of a relative position detection sensor for high speed maglev trains.

    Science.gov (United States)

    Xue, Song; He, Ning; Long, Zhiqiang

    2012-01-01

    The long stator track for high speed maglev trains has a tooth-slot structure. The sensor obtains precise relative position information for the traction system by detecting the long stator tooth-slot structure based on nondestructive detection technology. The magnetic field modeling of the sensor is a typical three-dimensional (3-D) electromagnetic problem with complex boundary conditions, and is studied semi-analytically in this paper. A second-order vector potential (SOVP) is introduced to simplify the vector field problem to a scalar field one, the solution of which can be expressed in terms of series expansions according to Multipole Theory (MT) and the New Equivalent Source (NES) method. The coefficients of the expansions are determined by the least squares method based on the boundary conditions. Then, the solution is compared to the simulation result through Finite Element Analysis (FEA). The comparison results show that the semi-analytical solution agrees approximately with the numerical solution. Finally, based on electromagnetic modeling, a difference coil structure is designed to improve the sensitivity and accuracy of the sensor.

  2. Electromagnetic Field Analysis and Modeling of a Relative Position Detection Sensor for High Speed Maglev Trains

    Directory of Open Access Journals (Sweden)

    Song Xue

    2012-05-01

    Full Text Available The long stator track for high speed maglev trains has a tooth-slot structure. The sensor obtains precise relative position information for the traction system by detecting the long stator tooth-slot structure based on nondestructive detection technology. The magnetic field modeling of the sensor is a typical three-dimensional (3-D electromagnetic problem with complex boundary conditions, and is studied semi-analytically in this paper. A second-order vector potential (SOVP is introduced to simplify the vector field problem to a scalar field one, the solution of which can be expressed in terms of series expansions according to Multipole Theory (MT and the New Equivalent Source (NES method. The coefficients of the expansions are determined by the least squares method based on the boundary conditions. Then, the solution is compared to the simulation result through Finite Element Analysis (FEA. The comparison results show that the semi-analytical solution agrees approximately with the numerical solution. Finally, based on electromagnetic modeling, a difference coil structure is designed to improve the sensitivity and accuracy of the sensor.

  3. Cosmological models with positive scalar spatial curvature and Λ>0

    Science.gov (United States)

    Ponce de Leon, J.

    1987-12-01

    Some exact spherically symmetric solutions of the Einstein field equations with Λ>0 and positive three-curvature are given. They have reasonable physical properties and represent universes which do not undergo inflation but have a non-de Sitter behaviour for large times. This paper extends some previous results in the literature. Permanent address: Apartado 2816, Caracas 1010-A, Venezuela.

  4. Mobilities of positive ions in gas ionization chambers

    International Nuclear Information System (INIS)

    Kusumegi, Asao

    1990-01-01

    Observed ion mobilities of organic molecules in Ar are compared with a complete polarization model to examine the performance of the model, and its applicability is discussed. In spite of its simplicity, the polarization model (small sphere limit) is found to agree satisfactorily with observed mobilities in the case of alkali ions in Ar. However, the model fails to account for the mobility of Ar + in Ar due to a resonant charge transfer interaction between the ion and the parent gas. On the other hand, the values of k, a parameter which depends on the kinetic and the potential energy of the relevant ion, derived from observed ion mobilities of organic molecules in Ar and in the parent gas are found to be close to each other. Except for few cases, it appears that the complete polarization model gives a reasonable approximation for the positive ion mobilities of organic molecules in Ar, though the importance of the ion mass identification is significant in considering the applicability of the model to the positive ion mobility of those organic molecules in Ar used in a gas ionization chamber. (N.K.)

  5. Recursive integral equations with positive kernel for lattice calculations

    International Nuclear Information System (INIS)

    Illuminati, F.; Isopi, M.

    1990-11-01

    A Kirkwood-Salzburg integral equation, with positive defined kernel, for the states of lattice models of statistical mechanics and quantum field theory is derived. The equation is defined in the thermodynamic limit, and its iterative solution is convergent. Moreover, positivity leads to an exact a priori bound on the iteration. The equation's relevance as a reliable algorithm for lattice calculations is therefore suggested, and it is illustrated with a simple application. It should provide a viable alternative to Monte Carlo methods for models of statistical mechanics and lattice gauge theories. 10 refs

  6. New Positive and Negative Hierarchies of Integrable Differential-Difference Equations and Conservation Laws

    International Nuclear Information System (INIS)

    Li Xinyue; Zhao Qiulan

    2009-01-01

    Two hierarchies of nonlinear integrable positive and negative lattice equations are derived from a discrete spectral problem. The two lattice hierarchies are proved to have discrete zero curvature representations associated with a discrete spectral problem, which also shows that the positive and negative hierarchies correspond to positive and negative power expansions of Lax operators with respect to the spectral parameter, respectively. Moreover, the integrable lattice models in the positive hierarchy are of polynomial type, and the integrable lattice models in the negative hierarchy are of rational type. Further, we construct infinite conservation laws about the positive hierarchy.

  7. Relationship of condylar position to disc position and morphology

    Energy Technology Data Exchange (ETDEWEB)

    Incesu, L.; Taskaya-Yilmaz, N. E-mail: nergizy@omu.edu.tr; Oeguetcen-Toller, M.; Uzun, E

    2004-09-01

    Introduction/objective: The purpose of this study was to assess whether condylar position, as depicted by magnetic resonance imaging, was an indicator of disc morphology and position. Methods and material: One hundred and twenty two TMJs of 61 patients with temporomandibular joint disorder were examined. Condylar position, disc deformity and degree of anterior disc displacement were evaluated by using magnetic resonance imaging. Results and discussion: Posterior condyle position was found to be the main feature of temporomandibular joints with slight and moderate anterior disc displacement. No statistical significance was found between the condylar position, and reducing and nonreducing disc positions. On the other hand, superior disc position was found to be statistically significant for centric condylar position. Conclusion: It was concluded that posterior condyle position could indicate anterior disc displacement whereas there was no relation between the position of condyle and the disc deformity.

  8. Modeling of load lifting process with unknown center of gravity position

    Science.gov (United States)

    Kamanin, Y. N.; Zhukov, M. I.; Panichkin, A. V.; Redelin, R. A.

    2018-03-01

    The article proposes a new type of lifting beams that allows one to lift loads where the position of the center of gravity is unknown beforehand. The benefit of implementing this type of traverse is confirmed by the high demand for this product from the industrial enterprises and lack of their availability on the market. In conducted studies, the main kinematic and dynamic dependencies of the load lifting process with an unknown position of the center of gravity were described allowing for design and verification calculations of the traverse with flexible slings and an adjustable bail to be carried out. The obtained results can be useful to engineers and employees of enterprises engaged in the design and manufacturing of the lifting equipment and scientists doing research in “Carrying and lifting machines”.

  9. Influence of mouth opening on oropharyngeal humidification and temperature in a bench model of neonatal continuous positive airway pressure.

    Science.gov (United States)

    Fischer, Hendrik S; Ullrich, Tim L; Bührer, Christoph; Czernik, Christoph; Schmalisch, Gerd

    2017-02-01

    Clinical studies show that non-invasive respiratory support by continuous positive airway pressure (CPAP) affects gas conditioning in the upper airways, especially in the presence of mouth leaks. Using a new bench model of neonatal CPAP, we investigated the influence of mouth opening on oropharyngeal temperature and humidity. The model features the insertion of a heated humidifier between an active model lung and an oropharyngeal head model to simulate the recurrent expiration of heated, humidified air. During unsupported breathing, physiological temperature and humidity were attained inside the model oropharynx, and mouth opening had no significant effect on oropharyngeal temperature and humidity. During binasal CPAP, the impact of mouth opening was investigated using three different scenarios: no conditioning in the CPAP circuit, heating only, and heated humidification. Mouth opening had a strong negative impact on oropharyngeal humidification in all tested scenarios, but heated humidification in the CPAP circuit maintained clinically acceptable humidity levels regardless of closed or open mouths. The model can be used to test new equipment for use with CPAP, and to investigate the effects of other methods of non-invasive respiratory support on gas conditioning in the presence of leaks. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

  10. Condylar position analysis with a new electronic condylar position measuring instrument E-CPM: influence of different examiners and a working bite on reproducibility.

    Science.gov (United States)

    Vahle-Hinz, K; Rybczynski, A; Jakstat, H; Ahlers, M O

    2009-01-01

    Condylar position analysis facilitates a quantitative comparison of the condylar position with and without a bite record, different records and changed influencing factors. Handling by the examiner when positioning the model is a significant factor with regard to the accuracy of the examination. Measurement accuracy could be improved when positioning the models by using special working bites, hence the objective of the experiments described in this study consisted in examining the extent to which the measuring results are influenced by different examiners and by using working bites. In the first trial, one examiner performed ten measurements without and with an interposed working bite for five model pairs in each case. In the second trial, nine examiners (three specialized dentists, three dental assistants, three students) performed ten measurements in each case without and with an interposed working bite. The three-dimensional position was read digitally with the E-CPM (Gamma Dental, Klosterneuburg/Vienna, Austria), recorded by means of spreadsheet software (Microsoft Excel) and diagnostic software (CMDfact, CMD3D module, dentaConcept, Hamburg), and evaluated with graphing software (Sigma Plot, Systat Software, USA). In the first trial, it was shown that the reproducibility of mounting was improved markedly (p <0.01) by using bite records in the form of working bites. In the second trial, it was shown that the mean error increased significantly (p <0.01) when several examiners performed the measurements compared with the results of one examiner alone. No significantly different results occurred (p < 0.01) in the comparison of the different groups of examiners with different educational and training backgrounds. This applied for the mounting methods without and with working bite. On the other hand, the reproducibility of mounting improved distinctly (p<0.01) in every group of examiners when working bites were used. Reproducibility of condylar position analysis was

  11. A comparison of positive vicarious learning and verbal information for reducing vicariously learned fear

    OpenAIRE

    Reynolds, Gemma; Wasely, David; Dunne, Guler; Askew, Chris

    2017-01-01

    Research with children has demonstrated that both positive vicarious learning (modelling) and positive verbal information can reduce children’s acquired fear responses for a particular stimulus. However, this fear reduction appears to be more effective when the intervention pathway matches the initial fear learning pathway. That is, positive verbal information is a more effective intervention than positive modelling when fear is originally acquired via negative verbal information. Research ha...

  12. Electrochemical Modeling and Performance of a Lithium- and Manganese-Rich Layered Transition-Metal Oxide Positive Electrode

    Energy Technology Data Exchange (ETDEWEB)

    Dees, Dennis W.; Abraham, Daniel P; Lu, Wenquan; Gallagher, Kevin G.; Bettge, Martin; Jansen, Andrew N

    2015-01-21

    The impedance of a lithium- and manganese-rich layered transition-metal oxide (MR-NMC) positive electrode, specifically Li1.2Ni0.15Mn0.55Co0.1O2, is compared to two other transition-metal layered oxide materials, specifically LiNi0.8Co0.15Al0.05O2 (NCA) and Li1.05(Ni1/3Co1/3Mn1/3)0.95O2 (NMC). A more detailed electrochemical impedance spectroscopy (EIS) study is conducted on the LMR-NMC electrode, which includes a range of states-of-charge (SOCs) for both current directions (i.e. charge and discharge) and two relaxation times (i.e. hours and one hundred hours) before the EIS sweep. The LMR-NMC electrode EIS studies are supported by half-cell constant current and galvanostatic intermittent titration technique (GITT) studies. Two types of electrochemical models are utilized to examine the results. The first type is a lithium ion cell electrochemical model for intercalation active material electrodes that includes a complex active material/electrolyte interfacial structure. In conclusion, the other is a lithium ion half-cell electrochemical model that focuses on the unique composite structure of the bulk LMR-NMC materials.

  13. Linear quadratic optimization for positive LTI system

    Science.gov (United States)

    Muhafzan, Yenti, Syafrida Wirma; Zulakmal

    2017-05-01

    Nowaday the linear quadratic optimization subject to positive linear time invariant (LTI) system constitute an interesting study considering it can become a mathematical model of variety of real problem whose variables have to nonnegative and trajectories generated by these variables must be nonnegative. In this paper we propose a method to generate an optimal control of linear quadratic optimization subject to positive linear time invariant (LTI) system. A sufficient condition that guarantee the existence of such optimal control is discussed.

  14. Positive Affect and the Complex Dynamics of Human Flourishing

    OpenAIRE

    Fredrickson, Barbara L.; Losada, Marcial F.

    2005-01-01

    Extending B. L. Fredrickson’s (1998) broaden-and-build theory of positive emotions and M. Losada’s (1999) nonlinear dynamics model of team performance, the authors predict that a ratio of positive to negative affect at or above 2.9 will characterize individuals in flourishing mental health. Participants (N = 188) completed an initial survey to identify flourishing mental health and then provided daily reports of experienced positive and negative emotions over 28 days. Results showed that the ...

  15. Positive Affect and the Complex Dynamics of Human Flourishing

    Science.gov (United States)

    Fredrickson, Barbara L.; Losada, Marcial F.

    2005-01-01

    Extending B. L. Fredrickson's (1998) broaden-and-build theory of positive emotions and M. Losada's (1999) nonlinear dynamics model of team performance, the authors predict that a ratio of positive to negative affect at or above 2.9 will characterize individuals in flourishing mental health. Participants (N=188) completed an initial survey to…

  16. Multiple operating models for data linkage: A privacy positive

    Directory of Open Access Journals (Sweden)

    Katrina Irvine

    2017-04-01

    Our data linkage centre will implement new operating models with cascading levels of data handling on behalf of custodians. Sharing or publication of empirical evidence on timeframes, efficiency and quality can provide useful inputs in the design of new operating models and assist with the development of stakeholder and public confidence.

  17. Nomogram for predicting the probability of the positive outcome of ...

    African Journals Online (AJOL)

    F.A. Yeboah

    Abstract. Introduction and objectives: Several existing models have been developed to predict positive prostate biopsy among men undergoing evaluation for prostate cancer (PCa). However, most of these models have come from industrialized countries. We therefore, developed a prostate disease nomogram model to ...

  18. Stochastic Models in the DORIS Position Time Series: Estimates from the IDS Contribution to the ITRF2014

    Science.gov (United States)

    Klos, A.; Bogusz, J.; Moreaux, G.

    2017-12-01

    This research focuses on the investigation of the deterministic and stochastic parts of the DORIS (Doppler Orbitography and Radiopositioning Integrated by Satellite) weekly coordinate time series from the IDS contribution to the ITRF2014A set of 90 stations was divided into three groups depending on when the data was collected at an individual station. To reliably describe the DORIS time series, we employed a mathematical model that included the long-term nonlinear signal, linear trend, seasonal oscillations (these three sum up to produce the Polynomial Trend Model) and a stochastic part, all being resolved with Maximum Likelihood Estimation (MLE). We proved that the values of the parameters delivered for DORIS data are strictly correlated with the time span of the observations, meaning that the most recent data are the most reliable ones. Not only did the seasonal amplitudes decrease over the years, but also, and most importantly, the noise level and its type changed significantly. We examined five different noise models to be applied to the stochastic part of the DORIS time series: a pure white noise (WN), a pure power-law noise (PL), a combination of white and power-law noise (WNPL), an autoregressive process of first order (AR(1)) and a Generalized Gauss Markov model (GGM). From our study it arises that the PL process may be chosen as the preferred one for most of the DORIS data. Moreover, the preferred noise model has changed through the years from AR(1) to pure PL with few stations characterized by a positive spectral index.

  19. Sketch for a model of four epistemological positions toward computer game play

    DEFF Research Database (Denmark)

    Leino, Olli

    2008-01-01

    The paper attempts to sketch out four distinct epistemological positions toward the player, who is understood as derived from play and game. To map out the problem field, two equally challenged positions toward computer game play are observed, emerging from inadequate treatment of the differences...... of playing a game is seen as independent of what goes on in the player’s mind (actually, the player might not even be the true subject of the game). Similar polarities are postulated regarding a game; from an exclusive viewpoint .game. is a signifying shorthand for objects, which, when observed from...

  20. Positively deflected anomaly mediation

    International Nuclear Information System (INIS)

    Okada, Nobuchika

    2002-01-01

    We generalize the so-called 'deflected anomaly mediation' scenario to the case where threshold corrections of heavy messengers to the sparticle squared masses are positive. A concrete model realizing this scenario is also presented. The tachyonic slepton problem can be fixed with only a pair of messengers. The resultant sparticle mass spectrum is quite different from that in the conventional deflected anomaly mediation scenario, but is similar to the one in the gauge mediation scenario. The lightest sparticle is mostly B-ino

  1. Introducing the religio-centric positional advantage to Indonesian small businesses

    Directory of Open Access Journals (Sweden)

    Hendar Hendar

    2017-03-01

    Full Text Available With a focus on small religion-based businesses in Indonesia, this research examines whether marketing innovativeness, customers responsiveness and competitors′ responsiveness can improve marketing performance. A conceptual model on the correlation of these three variables with religio-centric positional advantage and marketing performance is examined by using structural equation model. For this purpose 335 small businesses of Islamic Fashion had been studied using purposive sampling from 11 regencies/cities in Central Java (Indonesia. The results showed that (1 small companies in these market segments based on religion is likely to have better marketing performance when they have the Religio-centric positional advantage, (2 The increase in marketing innovativeness, CuR and CoR is required to improve and maintain religio-centric positional advantage, and (3 religio-centric positional advantage is definitely a mediator in the correlation of marketing innovativeness, customer responsiveness and competitors responsiveness with marketing performance.

  2. A comparison of positive vicarious learning and verbal information for reducing vicariously learned fear.

    Science.gov (United States)

    Reynolds, Gemma; Wasely, David; Dunne, Güler; Askew, Chris

    2017-10-19

    Research with children has demonstrated that both positive vicarious learning (modelling) and positive verbal information can reduce children's acquired fear responses for a particular stimulus. However, this fear reduction appears to be more effective when the intervention pathway matches the initial fear learning pathway. That is, positive verbal information is a more effective intervention than positive modelling when fear is originally acquired via negative verbal information. Research has yet to explore whether fear reduction pathways are also important for fears acquired via vicarious learning. To test this, an experiment compared the effectiveness of positive verbal information and positive vicarious learning interventions for reducing vicariously acquired fears in children (7-9 years). Both vicarious and informational fear reduction interventions were found to be equally effective at reducing vicariously acquired fears, suggesting that acquisition and intervention pathways do not need to match for successful fear reduction. This has significant implications for parents and those working with children because it suggests that providing children with positive information or positive vicarious learning immediately after a negative modelling event may prevent more serious fears developing.

  3. Control system design for nano-positioning using piezoelectric actuators

    International Nuclear Information System (INIS)

    Shan, Jinjun; Liu, Yanfang; Cui, Naigang; Gabbert, Ulrich

    2016-01-01

    This paper presents a systematic control system design for nano-positioning of a piezoelectric actuator (PEA). PEAs exhibit hysteresis nonlinearity, which can dramatically limit the application and performance of linear feedback control theory. Thus the hysteresis is compensated for based on the Maxwell resistive capacitor (MRC) model first. Then a proportional plus integral (PI) controller and a proportional double integral plus lead compensation (PII and L) controller are designed for the hysteresis-compensated PEA to account for model uncertainty, disturbance, and noise. The robust stability of both controllers is proved. The effectiveness of the proposed control scheme is demonstrated experimentally. Both controllers achieve fast precise positioning. The 2% settling times for the PI controller and the PII and L controller are 1.5 ms and 4.7 ms, respectively. The positioning resolution is upto 1 nm for both controllers. (paper)

  4. Internalization of the ultra-thin ideal: positive implicit associations with underweight fashion models are associated with drive for thinness in young women.

    Science.gov (United States)

    Ahern, Amy L; Bennett, Kate M; Hetherington, Marion M

    2008-01-01

    This study examined whether young women who make implicit associations between underweight models and positive attributes report elevated eating disorder symptoms. Ninety nine female undergraduates completed a weight based implicit association test (IAT) and self report measures of body dissatisfaction, thin-ideal internalization and eating disorder symptoms. IAT scores were associated with drive for thinness (r = -0.26, p fashion and being attractive. The IAT used in the current study is sensitive enough to discriminate between participants on drive for thinness. Women who have developed cognitive schemas that associate being underweight with positive attributes report higher eating disorder symptoms. Attitude importance is highlighted as a key construct in thin ideal internalization.

  5. A Demonstration of Regression False Positive Selection in Data Mining

    Science.gov (United States)

    Pinder, Jonathan P.

    2014-01-01

    Business analytics courses, such as marketing research, data mining, forecasting, and advanced financial modeling, have substantial predictive modeling components. The predictive modeling in these courses requires students to estimate and test many linear regressions. As a result, false positive variable selection ("type I errors") is…

  6. Positioning consumption

    DEFF Research Database (Denmark)

    Halkier, Bente; Keller, Margit

    2014-01-01

    positionings emerges based on empirical examples of research in parent–children consumption. Positionings are flexible discursive fixations of the relationship between the performances of the practitioner, other practitioners, media discourse and consumption activities. The basic positioning types...... are the practice maintenance and the practice change position, with different sorts of adapting in between. Media discourse can become a resource for a resistant position against social control or for an appropriating position in favour of space for action. Regardless of the current relation to a particular media......This article analyses the ways in which media discourses become a part of contested consumption activities. We apply a positioning perspective with practice theory to focus on how practitioners relate to media discourse as a symbolic resource in their everyday practices. A typology of performance...

  7. Positive sliding mode control for blood glucose regulation

    Science.gov (United States)

    Menani, Karima; Mohammadridha, Taghreed; Magdelaine, Nicolas; Abdelaziz, Mourad; Moog, Claude H.

    2017-11-01

    Biological systems involving positive variables as concentrations are some examples of so-called positive systems. This is the case of the glycemia-insulinemia system considered in this paper. To cope with these physical constraints, it is shown that a positive sliding mode control (SMC) can be designed for glycemia regulation. The largest positive invariant set (PIS) is obtained for the insulinemia subsystem in open and closed loop. The existence of a positive SMC for glycemia regulation is shown here for the first time. Necessary conditions to design the sliding surface and the discontinuity gain are derived to guarantee a positive SMC for the insulin dynamics. SMC is designed to be positive everywhere in the largest closed-loop PIS of plasma insulin system. Two-stage SMC is employed; the last stage SMC2 block uses the glycemia error to design the desired insulin trajectory. Then the plasma insulin state is forced to track the reference via SMC1. The resulting desired insulin trajectory is the required virtual control input of the glycemia system to eliminate blood glucose (BG) error. The positive control is tested in silico on type-1 diabetic patients model derived from real-life clinical data.

  8. Characteristics of eye-position gain field populations determine geometry of visual space

    Directory of Open Access Journals (Sweden)

    Sidney R Lehky

    2016-01-01

    Full Text Available We have previously demonstrated differences in eye-position spatial maps for anterior inferotemporal cortex (AIT in the ventral stream and lateral intraparietal cortex (LIP in the dorsal stream, based on population decoding of gaze angle modulations of neural visual responses (i.e., eye-position gain fields. Here we explore the basis of such spatial encoding differences through modeling of gain field characteristics. We created a population of model neurons, each having a different eye-position gain field. This population was used to reconstruct eye-position visual space using multidimensional scaling. As gain field shapes have never been well established experimentally, we examined different functions, including planar, sigmoidal, elliptical, hyperbolic, and mixtures of those functions. All functions successfully recovered positions, indicating weak constraints on allowable gain field shapes. We then used a genetic algorithm to modify the characteristics of model gain field populations until the recovered spatial maps closely matched those derived from monkey neurophysiological data in AIT and LIP. The primary differences found between model AIT and LIP gain fields were that AIT gain fields were more foveally dominated. That is, gain fields in AIT operated on smaller spatial scales and smaller dispersions than in LIP. Thus we show that the geometry of eye-position visual space depends on the population characteristics of gain fields, and that differences in gain field characteristics for different cortical areas may underlie differences in the representation of space.

  9. Products Positioning on a Heterogeneous Market

    Directory of Open Access Journals (Sweden)

    Liviu NEAMTU

    2012-04-01

    Full Text Available Analyses realized on markets showed in time that these are not amorphous masses of buyers but are formed of different divisions that we can often find under the name of market segments. Market can be divided in more segments of request composed of buyers, instinctively in the search of the same characteristic of the products. The liability of the firm is that of defining well the segments and serves them well with perfectly adapted products. Business positioning on well-defined segments of consumers leads to a relationship optimization between the business field and consumers. The present study takes into discussion positioning strategy, from the 4 proposed business strategies. We have tried to underline the fact that the correspondent or defective model for issuing and application of the positioning strategy determined the success or the failure at the level of the entire firm.

  10. A Method to Estimate the Size and Characteristics of HIV-positive Populations Using an Individual-based Stochastic Simulation Model

    DEFF Research Database (Denmark)

    Nakagawa, Fumiyo; van Sighem, Ard; Thiebaut, Rodolphe

    2016-01-01

    % plausibility range: 39,900-45,560) men who have sex with men were estimated to be living with HIV in the UK, of whom 10,400 (6,160-17,350) were undiagnosed. There were an estimated 3,210 (1,730-5,350) infections per year on average between 2010 and 2013. Sixty-two percent of the total HIV-positive population......It is important not only to collect epidemiologic data on HIV but to also fully utilize such information to understand the epidemic over time and to help inform and monitor the impact of policies and interventions. We describe and apply a novel method to estimate the size and characteristics of HIV-positive...... populations. The method was applied to data on men who have sex with men living in the UK and to a pseudo dataset to assess performance for different data availability. The individual-based simulation model was calibrated using an approximate Bayesian computation-based approach. In 2013, 48,310 (90...

  11. False Position, Double False Position and Cramer's Rule

    Science.gov (United States)

    Boman, Eugene

    2009-01-01

    We state and prove the methods of False Position (Regula Falsa) and Double False Position (Regula Duorum Falsorum). The history of both is traced from ancient Egypt and China through the work of Fibonacci, ending with a connection between Double False Position and Cramer's Rule.

  12. A simple spatial model exploring positive feedbacks at tropical alpine treelines

    NARCIS (Netherlands)

    Bader, M.; Rietkerk, M.; Bregt, A.K.

    2008-01-01

    Climate change could cause alpine treelines to shift in altitude or to change their spatial pattern, but little is known about the drivers of treeline dynamics and patterning. The position and patterns of tropical alpine treelines are generally attributed to land use, especially burning. Species

  13. The Role of Positive Emotions in Positive Psychology: The Broaden-and-Build Theory of Positive Emotions.

    Science.gov (United States)

    Fredrickson, Barbara L.

    2001-01-01

    Describes the broaden-and-build theory of positive emotions, situating it within the field of positive psychology. The theory posits that experiences of positive emotions broaden people's momentary thought-action repertoires, which in turn build their enduring personal resources (physical, intellectual, social, and psychological). Reviews…

  14. Ubiquitous positioning

    CERN Document Server

    Mannings, Robin

    2008-01-01

    This groundbreaking resource offers a practical, in-depth understanding of Ubiquitous Positioning - positioning systems that identify the location and position of people, vehicles and objects in time and space in the digitized networked economy. The future and growth of ubiquitous positioning will be fueled by the convergence of many other areas of technology, from mobile telematics, Internet technology, and location systems, to sensing systems, geographic information systems, and the semantic web. This first-of-its-kind volume explores ubiquitous positioning from a convergence perspective, of

  15. An Improved Neural Network Training Algorithm for Wi-Fi Fingerprinting Positioning

    Directory of Open Access Journals (Sweden)

    Esmond Mok

    2013-09-01

    Full Text Available Ubiquitous positioning provides continuous positional information in both indoor and outdoor environments for a wide spectrum of location based service (LBS applications. With the rapid development of the low-cost and high speed data communication, Wi-Fi networks in many metropolitan cities, strength of signals propagated from the Wi-Fi access points (APs namely received signal strength (RSS have been cleverly adopted for indoor positioning. In this paper, a Wi-Fi positioning algorithm based on neural network modeling of Wi-Fi signal patterns is proposed. This algorithm is based on the correlation between the initial parameter setting for neural network training and output of the mean square error to obtain better modeling of the nonlinear highly complex Wi-Fi signal power propagation surface. The test results show that this neural network based data processing algorithm can significantly improve the neural network training surface to achieve the highest possible accuracy of the Wi-Fi fingerprinting positioning method.

  16. A Sleep Position Trainer for positional sleep apnea

    DEFF Research Database (Denmark)

    Laub, Rasmus R; Tønnesen, Philip; Jennum, Poul J

    2017-01-01

    We tested the effect of the Sleep Position Trainer, a vibrational device, for positional sleep apnea in an open, randomized controlled trial with 101 patients, where 52 patients were allocated to Sleep Position Trainer and 49 patients to a non-treatment control group for 2 months (Part 1). All...... patients were then followed as a cohort for a period of 6 months with use of the Sleep Position Trainer (Part 2). The participants were assessed with polygraphy at entry, and after 2 and 6 months. The mean apnea-hypopnea index supine was 35 per h (SD, 18) in the Sleep Position Trainer group and 38 per h...... (SD, 15) in the control group at entry. In a per protocol analysis, the mean total apnea-hypopnea index at entry and after 2 months in the Sleep Position Trainer group was 18 per h (SD, 10) and 10 per h (SD, 9; P

  17. Positive Psychology: Positive Emotions and Emotional Intelegence

    OpenAIRE

    Miloseva, Lence

    2008-01-01

    The paper focuses on the and emotional intelligence. We try to answer on some questions regarding the role which positive emotions have in our life’s. The broaden-and-build theory (Fredrickson, 1998; 2001) predicts that positive emotions are useful in several ways. They guide present behavior, by broadening one’s attention and cognition, setting the stage for creative, explorative, and innovative pursuits. As well, positive emotions build personal and social resources to help individuals achi...

  18. Finite element modeling for predicting the contact pressure between a foam mattress and the human body in a supine position.

    Science.gov (United States)

    Lee, Wookjin; Won, Byeong Hee; Cho, Seong Wook

    2017-01-01

    In this paper, we generated finite element (FE) models to predict the contact pressure between a foam mattress and the human body in a supine position. Twenty-year-old males were used for three-dimensional scanning to produce the FE human models, which was composed of skin and muscle tissue. A linear elastic isotropic material model was used for the skin, and the Mooney-Rivlin model was used for the muscle tissue because it can effectively represent the nonlinear behavior of muscle. The contact pressure between the human model and the mattress was predicted by numerical simulation. The human models were validated by comparing the body pressure distribution obtained from the same human subject when he was lying on two different mattress types. The experimental results showed that the slope of the lower part of the mattress caused a decrease in the contact pressure at the heels, and the effect of bone structure was most pronounced in the scapula. After inserting a simple structure to function as the scapula, the contact pressure predicted by the FE human models was consistent with the experimental body pressure distribution for all body parts. These results suggest that the models proposed in this paper will be useful to researchers and designers of products related to the prevention of pressure ulcers.

  19. The High Five: Associations of the Five Positive Factors with the Big Five and Well-being

    Directory of Open Access Journals (Sweden)

    Alejandro C. Cosentino

    2017-07-01

    Full Text Available The study of individual differences in positive characteristics has mainly focused on moral traits. The objectives of this research were to study individual differences in positive characteristics from the point of view of the layperson, including non-moral individual characteristics, and to generate a replicable model of positive factors. Three studies based on a lexical approach were conducted. The first study generated a corpus of words which resulted in a refined list of socially shared positive characteristics. The second study produced a five-factor model of positive characteristics: erudition, peace, cheerfulness, honesty, and tenacity. The third study confirmed the model with a different sample. The five-positive-factor model not only showed positive associations with emotional, psychological and social well-being, but it also accounted for the variance beyond that accounted for by the Big Five factors in predicting these well-being dimensions. In addition, the presence of convergent and divergent validity of the five positive factors is shown with relation to the Values-in-Action (VIA classification of character strengths proposed by Peterson and Seligman (2004.

  20. Design and operation of a button-probe, beam-position measurements

    International Nuclear Information System (INIS)

    Gilpatrick, J.D.; Power, J.F.; Meyer, R.E.; Rose, C.R.

    1993-01-01

    Beam position measurement systems have been installed on the Advanced Free Electron Laser (AFEL) facility at Los Alamos National Laboratory. The position measurement uses a capacitive- or button-style probe that differentiates the beam-bunch charge distribution induced on each of the four probe lobes. These induced signals are fed to amplitude-to-phase processing electronics that provide output signals proportional to the arc tangent of the probe's opposite-lobe, signal-voltage ratios. An associated computer system then digitizes and linearizes these processed signals based on theoretical models and measured responses. This paper will review the processing electronics and capacitive probe responses by deriving simple theoretical models and comparing these models to actual measured responses

  1. Understanding Racism and Sexism in Harry Potter and Stuart Hall’s Model of Three Reading Positions

    Directory of Open Access Journals (Sweden)

    Brigita Pavšič

    2007-06-01

    Full Text Available In the Harry Potter book series there are several examples of sexist and racist stereotypes which can distort children’s understanding of reality and thus cause them to adopt prejudices and inappropriate judgments. The reason for such strong impact on the young readers can be explained with the use of Stuart Hall’s encoding/decoding model that suggests three reading positions and; as a result; three different ways of understanding one and the same text. The fact that oppositional reading; which allows the reader to asses the text critically; can only be adopted by educated and well-read readers explains why adult help is needed in directing the child reader towards a correct interpretation of such deficiencies of a text and offering a grounded explanation.

  2. Positive spatial curvature does not falsify the landscape

    Science.gov (United States)

    Horn, B.

    2017-12-01

    We present a simple cosmological model where the quantum tunneling of a scalar field rearranges the energetics of the matter sector, sending a stable static ancestor vacuum with positive spatial curvature into an inating solution with positive curvature. This serves as a proof of principle that an observation of positive spatial curvature does not falsify the hypothesis that our current observer patch originated from false vacuum tunneling in a string or field theoretic landscape. This poster submission is a summary of the work, and was presented at the 3rd annual ICPPA held in Moscow from October 2 to 5, 2017, by Prof. Rostislav Konoplich on behalf of the author.

  3. Want Positive Behavior? Use Positive Language

    Science.gov (United States)

    Wood, Chip; Freeman-Loftis, Babs

    2012-01-01

    Positive adult language is the professional use of words and tone of voice to enable students to learn in an engaged, active way. This includes learning social skills. To guide children toward choosing and maintaining positive behaviors, adults need to carefully choose the words and tone of voice used when speaking to them. Learning to use…

  4. Plasma position stability studies for TEXT-Upgrade

    International Nuclear Information System (INIS)

    Solano, E.R.; Neilson, G.H.

    1989-01-01

    A study of the vacuum vessel action on the plasma as a passive stabilizer is presented. The position feedback system is modelled in frequency domain to ascertain if the plasma in TEXT-Upgrade can be stabilized. 4 refs., 3 figs., 3 tabs

  5. Introducing positive discrimination in predictive models (Chapter 14)

    NARCIS (Netherlands)

    Calders, T.G.K.; Verwer, S.E.; Custers, B.H.M.; Calders, T.G.K.; Schermer, B.W.; Zarsky, T.Z.

    2013-01-01

    In this chapter we give three solutions for the discrimination-aware classification problem that are based upon Bayesian classifiers. These classifiers model the complete probability distribution by making strong independence assumptions. First we discuss the necessity of having discrimination-free

  6. Optimism predicts positive health in repatriated prisoners of war.

    Science.gov (United States)

    Segovia, Francine; Moore, Jeffrey L; Linnville, Steven E; Hoyt, Robert E

    2015-05-01

    "Positive health," defined as a state beyond the mere absence of disease, was used as a model to examine factors for enhancing health despite extreme trauma. The study examined the United States' longest detained American prisoners of war, those held in Vietnam in the 1960s through early 1970s. Positive health was measured using a physical and a psychological composite score for each individual, based on 9 physical and 9 psychological variables. Physical and psychological health was correlated with optimism obtained postrepatriation (circa 1973). Linear regressions were employed to determine which variables contributed most to health ratings. Optimism was the strongest predictor of physical health (β = -.33, t = -2.73, p = .008), followed by fewer sleep complaints (β = -.29, t = -2.52, p = .01). This model accounted for 25% of the variance. Optimism was also the strongest predictor of psychological health (β = -.41, t = -2.87, p = .006), followed by Minnesota Multiphasic Personality Inventory-Psychopathic Deviate (MMPI-PD; McKinley & Hathaway, 1944) scores (β = -.23, t = -1.88, p = .07). This model strongly suggests that optimism is a significant predictor of positive physical and psychological health, and optimism also provides long-term protective benefits. These findings and the utility of this model suggest a promising area for future research and intervention. (c) 2015 APA, all rights reserved).

  7. SU-D-204-03: Comparison of Patient Positioning Methods Through Modeling of Acute Rectal Toxicity in Intensity Modulated Radiation Therapy for Prostate Cancer. Does Quality of Data Matter More Than the Quantity?

    Energy Technology Data Exchange (ETDEWEB)

    Liu, X; Fatyga, M; Vora, S; Wong, W; Schild, S; Schild, M [Mayo Clinic Arizona, Phoenix, AZ (United States); Herman, M [Mayo Clinic, Rochester, MN (United States); Li, J; Wu, T [Arizona State University, Tempe, AZ (United States)

    2016-06-15

    Purpose: To determine if differences in patient positioning methods have an impact on the incidence and modeling of grade >=2 acute rectal toxicity in prostate cancer patients who were treated with Intensity Modulated Radiation Therapy (IMRT). Methods: We compared two databases of patients treated with radiation therapy for prostate cancer: a database of 79 patients who were treated with 7 field IMRT and daily image guided positioning based on implanted gold markers (IGRTdb), and a database of 302 patients who were treated with 5 field IMRT and daily positioning using a trans-abdominal ultrasound system (USdb). Complete planning dosimetry was available for IGRTdb patients while limited planning dosimetry, recorded at the time of planning, was available for USdb patients. We fit Lyman-Kutcher-Burman (LKB) model to IGRTdb only, and Univariate Logistic Regression (ULR) NTCP model to both databases. We perform Receiver Operating Characteristics analysis to determine the predictive power of NTCP models. Results: The incidence of grade >= 2 acute rectal toxicity in IGRTdb was 20%, while the incidence in USdb was 54%. Fits of both LKB and ULR models yielded predictive NTCP models for IGRTdb patients with Area Under the Curve (AUC) in the 0.63 – 0.67 range. Extrapolation of the ULR model from IGRTdb to planning dosimetry in USdb predicts that the incidence of acute rectal toxicity in USdb should not exceed 40%. Fits of the ULR model to the USdb do not yield predictive NTCP models and their AUC is consistent with AUC = 0.5. Conclusion: Accuracy of a patient positioning system affects clinically observed toxicity rates and the quality of NTCP models that can be derived from toxicity data. Poor correlation between planned and clinically delivered dosimetry may lead to erroneous or poorly performing NTCP models, even if the number of patients in a database is large.

  8. An evaluation of the Positive Emotional Experiences Scale: A preliminary analysis

    Directory of Open Access Journals (Sweden)

    Rene van Wyk

    2016-11-01

    Full Text Available Orientation: The positive organisational behaviour movement emphasises the advantages of psychological strengths in business. The psychological virtues of positive emotional experiences can potentially promote human strengths to the advantages of business functioning and the management of work conditions. This is supported by Fredrickson’s broaden-and-build theory that emphasises the broadening of reactive thought patterns through experiences of positive emotions. Research purpose: A preliminary psychometric evaluation of a positive measurement of dimensions of emotional experiences in the workplace, by rephrasing the Kiefer and Barclay Toxic Emotional Experiences Scale. Motivation for the study: This quantitative Exploratory Factor Analysis investigates the factorial structure and reliability of the Positive Emotional Experiences Scale, a positive rephrased version of the Toxic Emotional Experiences Scale. Research approach, design and method: This Exploratory Factor Analysis indicates an acceptable three-factor model for the Positive Emotional Experiences Scale. These three factors are: (1 psychological recurrent positive state, (2 social connectedness and (3 physical refreshed energy, with strong Cronbach’s alphas of 0.91, 0.91 and 0.94, respectively. Main findings: The three-factor model of the Positive Emotional Experiences Scale provides a valid measure in support of Fredrickson’s theory of social, physical and psychological endured personal resources that build positive emotions. Practical/Managerial implications: Knowledge gained on positive versus negative emotional experiences could be applied by management to promote endured personal resources that strengthen positive emotional experiences. Contribution/value-add: The contribution of this rephrased Positive Emotional Experiences Scale provides a reliable measure of assessment of the social, physical and endured psychological and personal resources identified in Fredrickson

  9. G. H. Mead in the history of sociological ideas.

    Science.gov (United States)

    da Silva, Filipe Carreira

    2006-01-01

    My aim is to discuss the history of the reception of George Herbert Mead's ideas in sociology. After discussing the methodological debate between presentism and historicism, I address the interpretations of those responsible for Mead's inclusion in the sociological canon: Herbert Blumer, Jürgen Habermas, and Hans Joas. In the concluding section, I assess these reconstructions of Mead's thought and suggest an alternative more consistent with my initial methodological remarks. In particular, I advocate a reconstruction of Mead's ideas that apprehends simultaneously its evolution over time and its thematic breadth. Such a historically minded reconstruction can be not only a useful corrective to possible anachronisms incurred by contemporary social theorists, but also a fruitful resource for their theory-building endeavors. Only then can meaningful and enriching dialogue with Mead begin. Copyright 2006 Wiley Periodicals, Inc.

  10. Inductive Non-Contact Position Sensor

    Science.gov (United States)

    Youngquist, Robert; Garcia, Alyssa; Simmons, Stephen

    2010-01-01

    Optical hardware has been developed to measure the depth of defects in the Space Shuttle Orbiter's windows. In this hardware, a mirror is translated such that its position corresponds to the defect's depth, so the depth measurement problem is transferred to a mirror-position measurement problem. This is preferable because the mirror is internal to the optical system and thus accessible. Based on requirements supplied by the window inspectors, the depth of the defects needs to be measured over a range of 200 microns with a resolution of about 100 nm and an accuracy of about 400 nm. These same requirements then apply to measuring the position of the mirror, and in addition, since this is a scanning system, a response time of about 10 ms is needed. A market search was conducted and no sensor that met these requirements that also fit into the available housing volume (less than one cubic inch) was found, so a novel sensor configuration was constructed to meet the requirements. This new sensor generates a nearly linearly varying magnetic field over a small region of space, which can easily be sampled, resulting in a voltage proportional to position. Experiments were done with a range of inductor values, drive voltages, drive frequencies, and inductor shapes. A rough mathematical model was developed for the device that, in most aspects, describes how it operates and what electrical parameters should be chosen for best performance. The final configuration met all the requirements, yielding a small rugged sensor that was easy to use and had nanometer resolution over more than the 200-micron range required. The inductive position sensor is a compact device (potentially as small as 2 cubic centimeters), which offers nanometer-position resolution over a demonstrated range of nearly 1 mm. One of its advantages is the simplicity of its electrical design. Also, the sensor resolution is nearly uniform across its operational range, which is in contrast to eddy current and

  11. Research on the Hysteresis Effect on Positioning the System with Flexible Elements

    Directory of Open Access Journals (Sweden)

    Audrius Čereška

    2015-03-01

    Full Text Available The paper analyzes the hysteresis phenomenon of positioning systems with flexible elements for transmitting motion of which piezoelectric actuators are used. The article investigates the influence of hysteresis on the accuracy of positioning systems. A special test bench for conducting research and stand-up methodology for carrying out experimental researches have been used. The test bench includes a computer piezo controller, an inductive displacement sensor and a dynamic data collector used for gathering data and transmitting it to the software package. Mathematical modelling of hysteresis using Matlab/Simulink software package has been done. The performed research has shown that the hysteresis model of maximum dispersion error compared to experimental results makes less than 5%. Thus, it can be stated that the selected method for hysteresis modelling is suitable for precision positioning systems having deformable elements and controlled employing piezoelectric actuators to model hysteresis.

  12. How task and person conflict shape the role of positive interdependence in management teams

    NARCIS (Netherlands)

    Janssen, O.; Van de Vliert, E.; Veenstra, C

    1999-01-01

    A literature-based model defining how task and person conflict modify the relationship between positive goal interdependence and decision-making effectiveness in management teams is presented. The model assumes that positive interdependence fosters effective decision making behaviors only if person

  13. Positive mood as a mediator of the relations among musical preference, postconsumption product evaluation, and consumer satisfaction.

    Science.gov (United States)

    Teng, Ching-I; Tseng, Hsu-Min; Wu, Heng-Hui

    2007-06-01

    This study of how positive mood mediates the influences of musical preference and postconsumption product evaluation on consumer satisfaction focuses specifically on a model in which positive mood fully mediates the influences. The proposed model is compared with two competing models, and a structural equation model is used to test and compare the three theory-driven models. This study sampled 247 students majoring in management at a single university. They had mean age of 23 yr. (SD=2.5). This study used questionnaires to measure subjects' evaluations of a cup of coffee, preference for the music broadcast in the coffee shop, positive mood, and satisfaction after they had the coffee. Analysis indicated that the proposed model outperformed the two competing models in describing the data using chi-square difference tests. Positive mood was identified as a full mediator of the relationship between musical preference and consumer satisfaction. Moreover, the results demonstrate for service managers the importance of creating positive consumer mood.

  14. Estimating uncertainty in subsurface glider position using transmissions from fixed acoustic tomography sources.

    Science.gov (United States)

    Van Uffelen, Lora J; Nosal, Eva-Marie; Howe, Bruce M; Carter, Glenn S; Worcester, Peter F; Dzieciuch, Matthew A; Heaney, Kevin D; Campbell, Richard L; Cross, Patrick S

    2013-10-01

    Four acoustic Seagliders were deployed in the Philippine Sea November 2010 to April 2011 in the vicinity of an acoustic tomography array. The gliders recorded over 2000 broadband transmissions at ranges up to 700 km from moored acoustic sources as they transited between mooring sites. The precision of glider positioning at the time of acoustic reception is important to resolve the fundamental ambiguity between position and sound speed. The Seagliders utilized GPS at the surface and a kinematic model below for positioning. The gliders were typically underwater for about 6.4 h, diving to depths of 1000 m and traveling on average 3.6 km during a dive. Measured acoustic arrival peaks were unambiguously associated with predicted ray arrivals. Statistics of travel-time offsets between received arrivals and acoustic predictions were used to estimate range uncertainty. Range (travel time) uncertainty between the source and the glider position from the kinematic model is estimated to be 639 m (426 ms) rms. Least-squares solutions for glider position estimated from acoustically derived ranges from 5 sources differed by 914 m rms from modeled positions, with estimated uncertainty of 106 m rms in horizontal position. Error analysis included 70 ms rms of uncertainty due to oceanic sound-speed variability.

  15. Phylogeny, ecology, and heart position in snakes

    DEFF Research Database (Denmark)

    Gartner, Gabriel E.A.; Hicks, James W.; Manzani, Paulo R.

    2010-01-01

    both conventional and phylogenetically based statistical methods. General linear models regressing log10 snout‐heart position on log10 snout‐vent length (SVL), as well as dummy variables coding for habitat and/or clade, were compared using likelihood ratio tests and the Akaike Information Criterion...

  16. Identification and control of plasma vertical position using neural network in Damavand tokamak

    International Nuclear Information System (INIS)

    Rasouli, H.; Rasouli, C.; Koohi, A.

    2013-01-01

    In this work, a nonlinear model is introduced to determine the vertical position of the plasma column in Damavand tokamak. Using this model as a simulator, a nonlinear neural network controller has been designed. In the first stage, the electronic drive and sensory circuits of Damavand tokamak are modified. These circuits can control the vertical position of the plasma column inside the vacuum vessel. Since the vertical position of plasma is an unstable parameter, a direct closed loop system identification algorithm is performed. In the second stage, a nonlinear model is identified for plasma vertical position, based on the multilayer perceptron (MLP) neural network (NN) structure. Estimation of simulator parameters has been performed by back-propagation error algorithm using Levenberg–Marquardt gradient descent optimization technique. The model is verified through simulation of the whole closed loop system using both simulator and actual plant in similar conditions. As the final stage, a MLP neural network controller is designed for simulator model. In the last step, online training is performed to tune the controller parameters. Simulation results justify using of the NN controller for the actual plant.

  17. Identification and control of plasma vertical position using neural network in Damavand tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Rasouli, H. [School of Plasma Physics and Nuclear Fusion, Institute of Nuclear Science and Technology, AEOI, P.O. Box 14155-1339, Tehran (Iran, Islamic Republic of); Advanced Process Automation and Control (APAC) Research Group, Faculty of Electrical Engineering, K.N. Toosi University of Technology, P.O. Box 16315-1355, Tehran (Iran, Islamic Republic of); Rasouli, C.; Koohi, A. [School of Plasma Physics and Nuclear Fusion, Institute of Nuclear Science and Technology, AEOI, P.O. Box 14155-1339, Tehran (Iran, Islamic Republic of)

    2013-02-15

    In this work, a nonlinear model is introduced to determine the vertical position of the plasma column in Damavand tokamak. Using this model as a simulator, a nonlinear neural network controller has been designed. In the first stage, the electronic drive and sensory circuits of Damavand tokamak are modified. These circuits can control the vertical position of the plasma column inside the vacuum vessel. Since the vertical position of plasma is an unstable parameter, a direct closed loop system identification algorithm is performed. In the second stage, a nonlinear model is identified for plasma vertical position, based on the multilayer perceptron (MLP) neural network (NN) structure. Estimation of simulator parameters has been performed by back-propagation error algorithm using Levenberg-Marquardt gradient descent optimization technique. The model is verified through simulation of the whole closed loop system using both simulator and actual plant in similar conditions. As the final stage, a MLP neural network controller is designed for simulator model. In the last step, online training is performed to tune the controller parameters. Simulation results justify using of the NN controller for the actual plant.

  18. Real-time horizontal position control for Aditya-upgrade tokamak

    International Nuclear Information System (INIS)

    Kumar, Rohit; Ghosh, Joydeep; Tanna, Rakesh L.

    2015-01-01

    Position of plasma column is required to be controlled in real time for improved operation of any tokamak. A PID based system for real-time horizontal plasma position control has been designed for Aditya Upgrade tokamak. Modelling of transfer functions of actuators, plasma and diagnostic system are carried out for ADITYA-U tokamak. The PID controller is optimized using MATLAB-SIMULINK for horizontal position control. Further feed-forward loop is implemented where disturbance due to density variation is suppressed, which results in improved performance as compared to conventional PID operation. In this paper the detailed design of the whole system for real time control of plasma horizontal position in Aditya Upgrade tokamak is presented. (author)

  19. Navicular bone position determined by positional MRI: a reproducibility study

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, Philip; Nybing, Janus D. [Copenhagen University Hospital Frederiksberg and Bispebjerg, Department of Radiology, Frederiksberg (Denmark); Johannsen, Finn E.; Stallknecht, Sandra E. [Copenhagen University Hospital Bispebjerg, Institute of Sports Medicine Copenhagen, Copenhagen, NV (Denmark); Hangaard, Stine; Hansen, Bjarke B. [Copenhagen University Hospital Frederiksberg, Parker Institute, Department of Rheumatology, Frederiksberg (Denmark); Boesen, Mikael [Copenhagen University Hospital Frederiksberg and Bispebjerg, Department of Radiology, Frederiksberg (Denmark); Copenhagen University Hospital Frederiksberg, Parker Institute, Department of Rheumatology, Frederiksberg (Denmark)

    2016-02-15

    To examine intraobserver, interobserver and between-day reproducibility of positional MRI for evaluation of navicular bone height (NVH) and medial navicular position (MNP). Positional MRI (pMRI) of the foot was performed on ten healthy participants (0.25 T G-scanner). Scanning was performed in supine and standing position, respectively. Two radiologists evaluated the images in a blinded manner. Reliability and agreement were assessed by calculation of intraclass correlation coefficient (ICC) and 95 % limits of agreement as a percentage of the mean (LOA%). Intraobserver and interobserver reliability was ''substantial'' in both supine and standing position (ICC 0.86-0.98) and showed good agreement (LOA% 4.9-14.7 %). Between-day reliability of navicular height and medial navicular position in standing position remained substantial (ICC 0.85-0.92) with adequate agreement (LOA% 8.3-19.8 %). In supine position between-day reliability was ''moderate'' for NVH (ICC 0.72) and ''slight'' for MNP (ICC 0.39). Agreement remained adequate between-days for MNP in supine position (LOA% 17.7 %), but it was less than adequate for NVH in supine position (LOA% 24.2 %). Navicular height and medial navicular position can be measured by pMRI in a very reproducible manner within and between observers. Increased measurement variation is observed between-days in supine position, which may be due to small positional differences or other unknown biomechanical factors. (orig.)

  20. Navicular bone position determined by positional MRI: a reproducibility study

    International Nuclear Information System (INIS)

    Hansen, Philip; Nybing, Janus D.; Johannsen, Finn E.; Stallknecht, Sandra E.; Hangaard, Stine; Hansen, Bjarke B.; Boesen, Mikael

    2016-01-01

    To examine intraobserver, interobserver and between-day reproducibility of positional MRI for evaluation of navicular bone height (NVH) and medial navicular position (MNP). Positional MRI (pMRI) of the foot was performed on ten healthy participants (0.25 T G-scanner). Scanning was performed in supine and standing position, respectively. Two radiologists evaluated the images in a blinded manner. Reliability and agreement were assessed by calculation of intraclass correlation coefficient (ICC) and 95 % limits of agreement as a percentage of the mean (LOA%). Intraobserver and interobserver reliability was ''substantial'' in both supine and standing position (ICC 0.86-0.98) and showed good agreement (LOA% 4.9-14.7 %). Between-day reliability of navicular height and medial navicular position in standing position remained substantial (ICC 0.85-0.92) with adequate agreement (LOA% 8.3-19.8 %). In supine position between-day reliability was ''moderate'' for NVH (ICC 0.72) and ''slight'' for MNP (ICC 0.39). Agreement remained adequate between-days for MNP in supine position (LOA% 17.7 %), but it was less than adequate for NVH in supine position (LOA% 24.2 %). Navicular height and medial navicular position can be measured by pMRI in a very reproducible manner within and between observers. Increased measurement variation is observed between-days in supine position, which may be due to small positional differences or other unknown biomechanical factors. (orig.)

  1. Modeling, Simulation and Position Control of 3DOF Articulated Manipulator

    Directory of Open Access Journals (Sweden)

    Hossein Sadegh Lafmejani

    2014-08-01

    Full Text Available In this paper, the modeling, simulation and control of 3 degrees of freedom articulated robotic manipulator have been studied. First, we extracted kinematics and dynamics equations of the mentioned manipulator by using the Lagrange method. In order to validate the analytical model of the manipulator we compared the model simulated in the simulation environment of Matlab with the model was simulated with the SimMechanics toolbox. A sample path has been designed for analyzing the tracking subject. The system has been linearized with feedback linearization and then a PID controller was applied to track a reference trajectory. Finally, the control results have been compared with a nonlinear PID controller.

  2. A Hybrid Smartphone Indoor Positioning Solution for Mobile LBS

    Directory of Open Access Journals (Sweden)

    Heidi Kuusniemi

    2012-12-01

    Full Text Available Smartphone positioning is an enabling technology used to create new business in the navigation and mobile location-based services (LBS industries. This paper presents a smartphone indoor positioning engine named HIPE that can be easily integrated with mobile LBS. HIPE is a hybrid solution that fuses measurements of smartphone sensors with wireless signals. The smartphone sensors are used to measure the user’s motion dynamics information (MDI, which represent the spatial correlation of various locations. Two algorithms based on hidden Markov model (HMM problems, the grid-based filter and the Viterbi algorithm, are used in this paper as the central processor for data fusion to resolve the position estimates, and these algorithms are applicable for different applications, e.g., real-time navigation and location tracking, respectively. HIPE is more widely applicable for various motion scenarios than solutions proposed in previous studies because it uses no deterministic motion models, which have been commonly used in previous works. The experimental results showed that HIPE can provide adequate positioning accuracy and robustness for different scenarios of MDI combinations. HIPE is a cost-efficient solution, and it can work flexibly with different smartphone platforms, which may have different types of sensors available for the measurement of MDI data. The reliability of the positioning solution was found to increase with increasing precision of the MDI data.

  3. A hybrid smartphone indoor positioning solution for mobile LBS.

    Science.gov (United States)

    Liu, Jingbin; Chen, Ruizhi; Pei, Ling; Guinness, Robert; Kuusniemi, Heidi

    2012-12-12

    Smartphone positioning is an enabling technology used to create new business in the navigation and mobile location-based services (LBS) industries. This paper presents a smartphone indoor positioning engine named HIPE that can be easily integrated with mobile LBS. HIPE is a hybrid solution that fuses measurements of smartphone sensors with wireless signals. The smartphone sensors are used to measure the user's motion dynamics information (MDI), which represent the spatial correlation of various locations. Two algorithms based on hidden Markov model (HMM) problems, the grid-based filter and the Viterbi algorithm, are used in this paper as the central processor for data fusion to resolve the position estimates, and these algorithms are applicable for different applications, e.g., real-time navigation and location tracking, respectively. HIPE is more widely applicable for various motion scenarios than solutions proposed in previous studies because it uses no deterministic motion models, which have been commonly used in previous works. The experimental results showed that HIPE can provide adequate positioning accuracy and robustness for different scenarios of MDI combinations. HIPE is a cost-efficient solution, and it can work flexibly with different smartphone platforms, which may have different types of sensors available for the measurement of MDI data. The reliability of the positioning solution was found to increase with increasing precision of the MDI data.

  4. Continuous, saturation, and discontinuous tokamak plasma vertical position control systems

    Energy Technology Data Exchange (ETDEWEB)

    Mitrishkin, Yuri V., E-mail: y_mitrishkin@hotmail.com [M. V. Lomonosov Moscow State University, Faculty of Physics, Moscow 119991 (Russian Federation); Pavlova, Evgeniia A., E-mail: janerigoler@mail.ru [M. V. Lomonosov Moscow State University, Faculty of Physics, Moscow 119991 (Russian Federation); Kuznetsov, Evgenii A., E-mail: ea.kuznetsov@mail.ru [Troitsk Institute for Innovation and Fusion Research, Moscow 142190 (Russian Federation); Gaydamaka, Kirill I., E-mail: k.gaydamaka@gmail.com [V. A. Trapeznikov Institute of Control Sciences of the Russian Academy of Sciences, Moscow 117997 (Russian Federation)

    2016-10-15

    Highlights: • Robust new linear state feedback control system for tokamak plasma vertical position. • Plasma vertical position relay control system with voltage inverter in sliding mode. • Design of full models of multiphase rectifier and voltage inverter. • First-order unit approximation of full multiphase rectifier model with high accuracy. • Wider range of unstable plant parameters of stable control system with multiphase rectifier. - Abstract: This paper is devoted to the design and comparison of unstable plasma vertical position control systems in the T-15 tokamak with the application of two types of actuators: a multiphase thyristor rectifier and a transistor voltage inverter. An unstable dynamic element obtained by the identification of plasma-physical DINA code was used as the plasma model. The simplest static feedback state space control law was synthesized as a linear combination of signals accessible to physical measurements, namely the plasma vertical displacement, the current, and the voltage in a horizontal field coil, to solve the pole placement problem for a closed-loop system. Only one system distinctive parameter was used to optimize the performance of the feedback system, viz., a multiple real pole. A first-order inertial unit was used as the rectifier model in the feedback. A system with a complete rectifier model was investigated as well. A system with the voltage inverter model and static linear controller was brought into a sliding mode. As this takes place, real time delays were taken into account in the discontinuous voltage inverter model. The comparison of the linear and sliding mode systems showed that the linear system enjoyed an essentially wider range of the plant model parameters where the feedback system was stable.

  5. Continuous, saturation, and discontinuous tokamak plasma vertical position control systems

    International Nuclear Information System (INIS)

    Mitrishkin, Yuri V.; Pavlova, Evgeniia A.; Kuznetsov, Evgenii A.; Gaydamaka, Kirill I.

    2016-01-01

    Highlights: • Robust new linear state feedback control system for tokamak plasma vertical position. • Plasma vertical position relay control system with voltage inverter in sliding mode. • Design of full models of multiphase rectifier and voltage inverter. • First-order unit approximation of full multiphase rectifier model with high accuracy. • Wider range of unstable plant parameters of stable control system with multiphase rectifier. - Abstract: This paper is devoted to the design and comparison of unstable plasma vertical position control systems in the T-15 tokamak with the application of two types of actuators: a multiphase thyristor rectifier and a transistor voltage inverter. An unstable dynamic element obtained by the identification of plasma-physical DINA code was used as the plasma model. The simplest static feedback state space control law was synthesized as a linear combination of signals accessible to physical measurements, namely the plasma vertical displacement, the current, and the voltage in a horizontal field coil, to solve the pole placement problem for a closed-loop system. Only one system distinctive parameter was used to optimize the performance of the feedback system, viz., a multiple real pole. A first-order inertial unit was used as the rectifier model in the feedback. A system with a complete rectifier model was investigated as well. A system with the voltage inverter model and static linear controller was brought into a sliding mode. As this takes place, real time delays were taken into account in the discontinuous voltage inverter model. The comparison of the linear and sliding mode systems showed that the linear system enjoyed an essentially wider range of the plant model parameters where the feedback system was stable.

  6. POWRS: position-sensitive motif discovery.

    Directory of Open Access Journals (Sweden)

    Ian W Davis

    Full Text Available Transcription factors and the short, often degenerate DNA sequences they recognize are central regulators of gene expression, but their regulatory code is challenging to dissect experimentally. Thus, computational approaches have long been used to identify putative regulatory elements from the patterns in promoter sequences. Here we present a new algorithm "POWRS" (POsition-sensitive WoRd Set for identifying regulatory sequence motifs, specifically developed to address two common shortcomings of existing algorithms. First, POWRS uses the position-specific enrichment of regulatory elements near transcription start sites to significantly increase sensitivity, while providing new information about the preferred localization of those elements. Second, POWRS forgoes position weight matrices for a discrete motif representation that appears more resistant to over-generalization. We apply this algorithm to discover sequences related to constitutive, high-level gene expression in the model plant Arabidopsis thaliana, and then experimentally validate the importance of those elements by systematically mutating two endogenous promoters and measuring the effect on gene expression levels. This provides a foundation for future efforts to rationally engineer gene expression in plants, a problem of great importance in developing biotech crop varieties.BSD-licensed Python code at http://grassrootsbio.com/papers/powrs/.

  7. Fixing D7-brane positions by F-theory fluxes

    International Nuclear Information System (INIS)

    Braun, A.P.; Hebecker, A.; Luedeling, C.; Valandro, R.

    2009-01-01

    To do realistic model building in type IIB supergravity, it is important to understand how to fix D7-brane positions by the choice of fluxes. More generally, F-theory model building requires the understanding of how fluxes determine the singularity structure (and hence gauge group and matter content) of the compactification. We analyse this problem in the simple setting of M-theory on K3xK3. Given a certain flux which is consistent with the F-theory limit, we can explicitly derive the positions at which D7 branes or stacks of D7 branes are stabilised. The analysis is based on a parameterization of the moduli space of type IIB string theory on T 2 /Z 2 (including D7-brane positions) in terms of the periods of integral cycles of M-theory on K3. This allows us, in particular, to select a specific desired gauge group by the choice of flux numbers.

  8. Benign positional vertigo

    Science.gov (United States)

    Vertigo - positional; Benign paroxysmal positional vertigo; BPPV: dizziness- positional ... Benign positional vertigo is also called benign paroxysmal positional vertigo (BPPV). It is caused by a problem in the inner ear. ...

  9. Fagbevægelsens svage internationale position over den internationale kapital

    DEFF Research Database (Denmark)

    Søborg, Henrik

    2007-01-01

    På baggrund af en historisk analyse af fagbevægelsens internationale position med hovedvægten på udbredelsen af industrial relations modeller og deres konfrontation med neo-liberalismen og omstruktureringen af kapatalismen i 1980'erne belyses fagbevægelsens internationale position i dag med eksem...... eksempler fra Kina og Malaysia. Udgivelsesdato: december...

  10. The Role of Positive Emotions in Positive Psychology: The Broaden-and-Build Theory of Positive Emotions

    OpenAIRE

    Fredrickson, Barbara L.

    2001-01-01

    In this article, the author describes a new theoretical perspective on positive emotions and situates this new perspective within the emerging field of positive psychology. The broaden-and-build theory posits that experiences of positive emotions broaden people's momentary thought-action repertoires, which in turn serves to build their enduring personal resources, ranging from physical and intellectual resources to social and psychological resources. Preliminary empirical evidence supporting ...

  11. Positioning performance of a maglev fine positioning system

    Energy Technology Data Exchange (ETDEWEB)

    Wronosky, J.B.; Smith, T.G.; Jordan, J.D.; Darnold, J.R.

    1996-12-01

    A wafer positioning system was recently developed by Sandia National Laboratories for an Extreme Ultraviolet Lithography (EUVL) research tool. The system, which utilizes a magnetically levitated fine stage to provide ultra-precise positioning in all six degrees of freedom, incorporates technological improvements resulting from four years of prototype development experience. System enhancements, implemented on a second generation design for an ARPA National Center for Advanced Information Component Manufacturing (NCAICM) project, introduced active structural control for the levitated structure of the system. Magnetic levitation (maglev) is emerging as an important technology for wafer positioning systems in advanced lithography applications. The advantages of maglev stem from the absence of physical contact. The resulting lack of friction enables accurate, fast positioning. Maglev systems are mechanically simple, accomplishing full six degree-of-freedom suspension and control with a minimum of moving parts. Power-efficient designs, which reduce the possibility of thermal distortion of the platen, are achievable. Manufacturing throughput will be improved in future systems with the addition of active structural control of the positioning stages. This paper describes the design, implementation, and functional capability of the maglev fine positioning system. Specifics regarding performance design goals and test results are presented.

  12. Applying CSSI Methodology to the Interpretation of the Audit Expectation Gap

    Directory of Open Access Journals (Sweden)

    Bruno José Machado de Almeida

    2016-09-01

    Full Text Available The development of the audit process is underpinned by a set of concepts that are not generally understood by the users of financial information or by the generality of investors. An audit is developed based on an accounting platform whose abstract or formal object consists of a set of conventions, principles and standards that can give rise to what is called an accounting gap. An audit is also grounded on concepts of risk and materiality which, although considered audit anchors, are not perceived or understood by the general public and thus can give rise to an expectation gap. In addition, a credibility gap can occur, given the degree of judgment implicit in any accounting model: accounting principles and standards determine what should or should not be recognized. Equally present is the gap that exists between reasonable assurance and absolute assurance and the gap with respect to auditor performance. Analysing the concept and meaning of these terms is the main objective of this paper. Based on the model of Blumer, the methodology emphasizes symbolic interactionism, suggesting that, in society, every professional space interprets in a unique way the concepts and symbols used in the communication process. Our study suggests that  concepts are fundamental tools used in social practice for observing and representing the real world, and for acting and working in it.

  13. BDS/GPS Dual Systems Positioning Based on the Modified SR-UKF Algorithm

    Directory of Open Access Journals (Sweden)

    JaeHyok Kong

    2016-05-01

    Full Text Available The Global Navigation Satellite System can provide all-day three-dimensional position and speed information. Currently, only using the single navigation system cannot satisfy the requirements of the system’s reliability and integrity. In order to improve the reliability and stability of the satellite navigation system, the positioning method by BDS and GPS navigation system is presented, the measurement model and the state model are described. Furthermore, the modified square-root Unscented Kalman Filter (SR-UKF algorithm is employed in BDS and GPS conditions, and analysis of single system/multi-system positioning has been carried out, respectively. The experimental results are compared with the traditional estimation results, which show that the proposed method can perform highly-precise positioning. Especially when the number of satellites is not adequate enough, the proposed method combine BDS and GPS systems to achieve a higher positioning precision.

  14. A fast and robust kinematic model for a 12 DoF hyper-redundant robot positioning: An optimization proposal

    Science.gov (United States)

    Lima, José; Pereira, Ana I.; Costa, Paulo; Pinto, Andry; Costa, Pedro

    2017-07-01

    This paper describes an optimization procedure for a robot with 12 degrees of freedom avoiding the inverse kinematics problem, which is a hard task for this type of robot manipulator. This robot can be used to pick and place tasks in complex designs. Combining an accurate and fast direct kinematics model with optimization strategies, it is possible to achieve the joints angles for a desired end-effector position and orientation. The optimization methods stretched simulated annealing algorithm and genetic algorithm were used. The solutions found were validated using data originated by a real and by a simulated robot formed by 12 servomotors with a gripper.

  15. Robust position estimation of a mobile vehicle

    International Nuclear Information System (INIS)

    Conan, V.

    1994-01-01

    The ability to estimate the position of a mobile vehicle is a key task for navigation over large distances in complex indoor environments such as nuclear power plants. Schematics of the plants are available, but they are incomplete, as real settings contain many objects, such as pipes, cables or furniture, that mask part of the model. The position estimation method described in this paper matches 3-D data with a simple schematic of a plant. It is basically independent of odometer information and viewpoint, robust to noisy data and spurious points and largely insensitive to occlusions. The method is based on a hypothesis/verification paradigm and its complexity is polynomial; it runs in O(m 4 n 4 ), where m represents the number of model patches and n the number of scene patches. Heuristics are presented to speed up the algorithm. Results on real 3-D data show good behaviour even when the scene is very occluded. (authors). 16 refs., 3 figs., 1 tab

  16. Laser projection positioning of spatial contour curves via a galvanometric scanner

    Science.gov (United States)

    Tu, Junchao; Zhang, Liyan

    2018-04-01

    The technology of laser projection positioning is widely applied in advanced manufacturing fields (e.g. composite plying, parts location and installation). In order to use it better, a laser projection positioning (LPP) system is designed and implemented. Firstly, the LPP system is built by a laser galvanometric scanning (LGS) system and a binocular vision system. Applying Single-hidden Layer Feed-forward Neural Network (SLFN), the system model is constructed next. Secondly, the LGS system and the binocular system, which are respectively independent, are integrated through a datadriven calibration method based on extreme learning machine (ELM) algorithm. Finally, a projection positioning method is proposed within the framework of the calibrated SLFN system model. A well-designed experiment is conducted to verify the viability and effectiveness of the proposed system. In addition, the accuracy of projection positioning are evaluated to show that the LPP system can achieves the good localization effect.

  17. A mathematical model for describing the retinal nerve fiber bundle trajectories in the human eye: average course, variability, and influence of refraction, optic disc size and optic disc position.

    Science.gov (United States)

    Jansonius, Nomdo M; Schiefer, Julia; Nevalainen, Jukka; Paetzold, Jens; Schiefer, Ulrich

    2012-12-01

    Previously we developed a mathematical model for describing the retinal nerve fiber bundle trajectories in the superior-temporal and inferior-temporal regions of the human retina, based on traced trajectories extracted from fundus photographs. Aims of the current study were to (i) validate the existing model, (ii) expand the model to the entire retina and (iii) determine the influence of refraction, optic disc size and optic disc position on the trajectories. A new set of fundus photographs was collected comprising 28 eyes of 28 subjects. From these 28 photographs, 625 trajectories were extracted. Trajectories in the temporal region of the retina were compared to the existing model. In this region, 347 of 399 trajectories (87%) were within the 95% central range of the existing model. The model was extended to the nasal region. With this extension, the model can now be applied to the entire retina that corresponds to the visual field as tested with standard automated perimetry (up to approximately 30° eccentricity). There was an asymmetry between the superior and inferior hemifields and a considerable location-specific inter-subject variability. In the nasal region, we found two "singularities", located roughly at the one and five o'clock positions for the right optic disc. Here, trajectories from relatively widespread areas of the retina converge. Associations between individual deviations from the model and refraction, optic disc size and optic disc position were studied with multiple linear regression. Refraction (P = 0.021) and possibly optic disc inclination (P = 0.09) influenced the trajectories in the superior-temporal region. Copyright © 2012 Elsevier Ltd. All rights reserved.

  18. STUDY OF WINES POSITIONING ON THE ROMANIAN MARKET

    Directory of Open Access Journals (Sweden)

    Alex GAVRILESCU

    2011-01-01

    Full Text Available In this paper, I have done a research on the positioning of Romanian wines. The positioning is a necessary approach of brands to have a privileged position in the minds of consumers. In front of the keen foreign competition, the Romanian wine brands must assert a new identity to match the Romanian client's current lifestyle. The main objective of the research is the identification of the Romanian wine brand positioning. To achieve the objective of the research I have conducted a market research. The study was conducted on a sample of 100 respondents, consumers of Romanian wines. In the study, I have focused on a number of elements necessary for obtaining the positioning maps. Thus I tested the assisted and unassisted recognition of vineyards, the vineyards positioning depending on internal and international recognition and tradition / reputation, the vineyards positioning depending on the internal and international recognition and price, the vineyards positioning depending on sweet, red and light wines and on strong and dry wines. The positioning strategy will determine, on the one hand, the efficiency of the marketing activity at the level of consumer segment by obtaining a better image due to the high satisfaction of the specific needs, and on the other hand, the differentiation will enable to the company to gain competitive advantages, hence substantially increased profits. The theoretical contribution of this paper is to clarify the issues of positioning and to emphasize its importance. The practical contribution refers to the positioning of wines brands, which can be a model of reflection for each of the analyzed vineyards.

  19. Positive Orientation-a Common Base for Hedonistic and Eudemonistic Happiness?

    Science.gov (United States)

    Oleś, Piotr; Jankowski, Tomasz

    2018-01-01

    Positive orientation (PO) is proposed as a common base for hedonistic and eudemonistic senses of happiness. PO involves a tendency to formulate positive judgments concerning the self, one's personal life, and the future. Previously, PO had been investigated in the context of the hedonistic approach to well-being. In this article, we tested a broader understanding of PO, which is conceptualized, here, as a latent factor underlying variables that exemplify hedonistic and eudemonistic view on happiness. Using two samples ( N  = 159 and N  = 200), we tested three models of PO extended to include various measures of meaning of life. The extended models fitted the data well. Results suggest that PO can be a general factor that is the basis for integrating two aspects of well-being: searching for positivity and pleasure, as well as striving for meaning.

  20. Local SAR in High Pass Birdcage and TEM Body Coils for Multiple Human Body Models in Clinical Landmark Positions at 3T

    Science.gov (United States)

    Yeo, Desmond TB; Wang, Zhangwei; Loew, Wolfgang; Vogel, Mika W; Hancu, Ileana

    2011-01-01

    Purpose To use EM simulations to study the effects of body type, landmark position, and RF body coil type on peak local SAR in 3T MRI. Materials and Methods Numerically computed peak local SAR for four human body models (HBMs) in three landmark positions (head, heart, pelvic) were compared for a high-pass birdcage and a transverse electromagnetic 3T body coil. Local SAR values were normalized to the IEC whole-body average SAR limit of 2.0 W/kg for normal scan mode. Results Local SAR distributions were highly variable. Consistent with previous reports, the peak local SAR values generally occurred in the neck-shoulder area, near rungs, or between tissues of greatly differing electrical properties. The HBM type significantly influenced the peak local SAR, with stockier HBMs, extending extremities towards rungs, displaying the highest SAR. There was also a trend for higher peak SAR in the head-centric and heart-centric positions. The impact of the coil-types studied was not statistically significant. Conclusion The large variability in peak local SAR indicates the need to include more than one HBM or landmark position when evaluating safety of body coils. It is recommended that a HBM with arms near the rungs be included, to create physically realizable high-SAR scenarios. PMID:21509880

  1. Magnetospheric signature of some F layer positive storms

    International Nuclear Information System (INIS)

    Miller, N.J.; Mayr, H.G.; Grebowsky, J.M.; Harris, I.; Tulunay, Y.K.

    1981-01-01

    Calculations using a self-consistent model of the global thermosphere-ionosphere system perturbed by high-latitude thermospheric heating show that the resultant electron density disturbances within the mid-latitude F layer can propagate upward along magnetic field lines to the equator. The F layer disturbances described by the model calculations correspond to the evolution of enhancements or reductions in electron density that is called the positive or negative phase of an F layer storm. We deduce that the positive phase of dayside F layer storms is initiated when high-latitude thermospheric heating generates equatorward winds. These winds raise the mid-latitude F layer along the geomagnetic field B through momentum transfer from neutral atoms to F layer ons that pull electrons with them. For Lapprox.3 or less the upward movement of ionospheric plasma results in ionization increases at all altitudes along B from the F2 maximum to the equator. An increase in the average magnitude of the equatorial dawn-dusk magnetospheric electric field retards the dayside development of a positive storm phase by drifting plasma away from mid-latitude field lines along which the electron density is increasing. During an F layer storm in June 1972, instruments on Explorer 45 and Ariel 4 detected dayside electron density enhancements simultaneously at 550 km over mid-latitudes and near the equatorial plane in the magnetosphere. These in situ measurements support the model prediction that disturbances in the magnetospheric plasma near the equator can arise through interactions occuring at lower altitudes along a magnetic field line. Our study demonstrates that some storm time enhancements of dayside magnetospheric plasma near Lapprox.2--3 may be signatures of the positive phase of an F layer storm

  2. Positional Accuracy Assessment for Effective Shoreline Change ...

    African Journals Online (AJOL)

    Michael

    2016-06-01

    Jun 1, 2016 ... as backdrop in GIS environment. Positional error of ... integrated dataset obviously bore the cumulative effect of the input datasets. ... change. The shoreline, which is the interface between land ... modelling, which enables future shoreline change trend to ..... as gaps due to cloud cover and limitation of the.

  3. Note of positions of particles in classical relativistic mechanics

    International Nuclear Information System (INIS)

    Pazma, V.

    1983-01-01

    The relation between world-lines and the position vector of a particle is studied from the point of view of gauge system theory. The expressions for the position vector of a free relativistic particle and of two interacting particles described by the Todorov-Komar model are derived under plausible assumptions. The relation between the physical meaning of basic canonical variables and the choice of a gauge is also discussed. (author)

  4. Research on the Strategy of Motion Constraint-Aided ZUPT for the SINS Positioning System of a Shearer

    Directory of Open Access Journals (Sweden)

    Hai Yang

    2017-11-01

    Full Text Available The accurate measurement of position and orientation for shearers is a key technology in realizing an automated, fully-mechanized, coal mining face. Since Global Positioning System (GPS signal cannot arrive at the coal mine underground, wireless sensor network positioning system cannot operate stably in the coal mine; thus a strap-down inertial navigation system (SINS is used to measure the position and orientation of the shearer. Aiming at the problem of the SINS accumulative error, this paper proposes a positioning error correction method based on the motion constraint-aided SINS zero velocity updated (ZUPT model. First of all, a stationary state detection model of the shearer is built with median filter based on the acceleration and angular rate measured by the SINS. Secondly, the motion of the shearer is analyzed using coal mining technology, then the motion constraint model of the shearer is established. In addition, the alternate action between the motion constraint model and the ZUPT model is analyzed at the process of movement and cessation of the shearer, respectively; hence, the motion constraint-aided SINS ZUPT model is built. Finally, by means of the experimental platform of the SINS for the shearer, the experimental results show that the maximum position error with the positioning model proposed in this paper is 1.6 m in 180 s, and increases by 92.0% and 88.1% compared with the single motion constraint model and single ZUPT model, respectively. It can then restrain the accumulative error of the SINS effectively.

  5. Simulation of GNSS reflected signals and estimation of position accuracy in GNSS-challenged environment

    DEFF Research Database (Denmark)

    Jakobsen, Jakob; Jensen, Anna B. O.; Nielsen, Allan Aasbjerg

    2015-01-01

    non-line-of-sight satellites. The signal reflections are implemented using the extended geometric path length of the signal path caused by reflections from the surrounding buildings. Based on real GPS satellite positions, simulated Galileo satellite positions, models of atmospheric effect...... on the satellite signals, designs of representative environments e.g. urban and rural scenarios, and a method to simulate reflection of satellite signals within the environment we are able to estimate the position accuracy given several prerequisites as described in the paper. The result is a modelling...... of the signal path from satellite to receiver, the satellite availability, the extended pseudoranges caused by signal reflection, and an estimate of the position accuracy based on a least squares adjustment of the extended pseudoranges. The paper describes the models and algorithms used and a verification test...

  6. Comparison of beam position calculation methods for application in digital acquisition systems

    Science.gov (United States)

    Reiter, A.; Singh, R.

    2018-05-01

    Different approaches to the data analysis of beam position monitors in hadron accelerators are compared adopting the perspective of an analog-to-digital converter in a sampling acquisition system. Special emphasis is given to position uncertainty and robustness against bias and interference that may be encountered in an accelerator environment. In a time-domain analysis of data in the presence of statistical noise, the position calculation based on the difference-over-sum method with algorithms like signal integral or power can be interpreted as a least-squares analysis of a corresponding fit function. This link to the least-squares method is exploited in the evaluation of analysis properties and in the calculation of position uncertainty. In an analytical model and experimental evaluations the positions derived from a straight line fit or equivalently the standard deviation are found to be the most robust and to offer the least variance. The measured position uncertainty is consistent with the model prediction in our experiment, and the results of tune measurements improve significantly.

  7. Does positivity mediate the relation of extraversion and neuroticism with subjective happiness?

    Science.gov (United States)

    Lauriola, Marco; Iani, Luca

    2015-01-01

    Recent theories suggest an important role of neuroticism, extraversion, attitudes, and global positive orientations as predictors of subjective happiness. We examined whether positivity mediates the hypothesized relations in a community sample of 504 adults between the ages of 20 and 60 years old (females = 50%). A model with significant paths from neuroticism to subjective happiness, from extraversion and neuroticism to positivity, and from positivity to subjective happiness fitted the data (Satorra-Bentler scaled chi-square (38) = 105.91; Comparative Fit Index = .96; Non-Normed Fit Index = .95; Root Mean Square Error of Approximation = .060; 90% confidence interval = .046, .073). The percentage of subjective happiness variance accounted for by personality traits was only about 48%, whereas adding positivity as a mediating factor increased the explained amount of subjective happiness to 78%. The mediation model was invariant by age and gender. The results show that the effect of extraversion on happiness was fully mediated by positivity, whereas the effect of neuroticism was only partially mediated. Implications for happiness studies are also discussed.

  8. Positive Psychology

    Science.gov (United States)

    Peterson, Christopher

    2009-01-01

    Positive psychology is a deliberate correction to the focus of psychology on problems. Positive psychology does not deny the difficulties that people may experience but does suggest that sole attention to disorder leads to an incomplete view of the human condition. Positive psychologists concern themselves with four major topics: (1) positive…

  9. Comparative study of potential whiplash injuries for different occupant seated positions during rear end accidents.

    Science.gov (United States)

    Omerović, Senad; Tomasch, Ernst; Gutsche, Andreas J; Prebil, Ivan

    2016-01-01

    Whiplash injuries to the cervical spine represent a considerable economic burden on society with medical conditions, in some cases persisting for more than a year. Numerous studies of whiplash injuries have been made for occupant normal seated position, leaving the analysis of neck injuries for out-of-normal positions not well documented. For that purpose, a detailed human cervical spine finite element model was developed. The analysis was made for four most common occupant seated positions, such as: Normal Position with the torso against the seat back and the head looking straight ahead, Torso Lean forward position with the torso away from the seat back for approximately 10°, Head Flexed position with the head flexed forward approximately 20° from the normal position and Head-Flexed with Torso Lean forward position with the head flexed forward approximately 20° and torso 10° from the normal position. The comparative study included the analysis of capsular ligament deformation and the level of S-curvature of the cervical spine. The model developed predicted that Head Flexed seated position and Head-Flexed with Torso Lean forward seated position are most threatening for upper and lower cervical spine capsular ligament, respectively. As for the level of S-curvature, the model predicted that Head-Flexed with Torso Lean forward seated position would be most prone to neck injuries associated with it. This study demonstrated that the occupant seated position has a significant influence on potential whiplash injuries.

  10. Automatic multi-camera calibration for deployable positioning systems

    Science.gov (United States)

    Axelsson, Maria; Karlsson, Mikael; Rudner, Staffan

    2012-06-01

    Surveillance with automated positioning and tracking of subjects and vehicles in 3D is desired in many defence and security applications. Camera systems with stereo or multiple cameras are often used for 3D positioning. In such systems, accurate camera calibration is needed to obtain a reliable 3D position estimate. There is also a need for automated camera calibration to facilitate fast deployment of semi-mobile multi-camera 3D positioning systems. In this paper we investigate a method for automatic calibration of the extrinsic camera parameters (relative camera pose and orientation) of a multi-camera positioning system. It is based on estimation of the essential matrix between each camera pair using the 5-point method for intrinsically calibrated cameras. The method is compared to a manual calibration method using real HD video data from a field trial with a multicamera positioning system. The method is also evaluated on simulated data from a stereo camera model. The results show that the reprojection error of the automated camera calibration method is close to or smaller than the error for the manual calibration method and that the automated calibration method can replace the manual calibration.

  11. Mixture models reveal multiple positional bias types in RNA-Seq data and lead to accurate transcript concentration estimates.

    Directory of Open Access Journals (Sweden)

    Andreas Tuerk

    2017-05-01

    Full Text Available Accuracy of transcript quantification with RNA-Seq is negatively affected by positional fragment bias. This article introduces Mix2 (rd. "mixquare", a transcript quantification method which uses a mixture of probability distributions to model and thereby neutralize the effects of positional fragment bias. The parameters of Mix2 are trained by Expectation Maximization resulting in simultaneous transcript abundance and bias estimates. We compare Mix2 to Cufflinks, RSEM, eXpress and PennSeq; state-of-the-art quantification methods implementing some form of bias correction. On four synthetic biases we show that the accuracy of Mix2 overall exceeds the accuracy of the other methods and that its bias estimates converge to the correct solution. We further evaluate Mix2 on real RNA-Seq data from the Microarray and Sequencing Quality Control (MAQC, SEQC Consortia. On MAQC data, Mix2 achieves improved correlation to qPCR measurements with a relative increase in R2 between 4% and 50%. Mix2 also yields repeatable concentration estimates across technical replicates with a relative increase in R2 between 8% and 47% and reduced standard deviation across the full concentration range. We further observe more accurate detection of differential expression with a relative increase in true positives between 74% and 378% for 5% false positives. In addition, Mix2 reveals 5 dominant biases in MAQC data deviating from the common assumption of a uniform fragment distribution. On SEQC data, Mix2 yields higher consistency between measured and predicted concentration ratios. A relative error of 20% or less is obtained for 51% of transcripts by Mix2, 40% of transcripts by Cufflinks and RSEM and 30% by eXpress. Titration order consistency is correct for 47% of transcripts for Mix2, 41% for Cufflinks and RSEM and 34% for eXpress. We, further, observe improved repeatability across laboratory sites with a relative increase in R2 between 8% and 44% and reduced standard deviation.

  12. Effects of Target Positioning Error on Motion Compensation for Airborne Interferometric SAR

    Directory of Open Access Journals (Sweden)

    Li Yin-wei

    2013-12-01

    Full Text Available The measurement inaccuracies of Inertial Measurement Unit/Global Positioning System (IMU/GPS as well as the positioning error of the target may contribute to the residual uncompensated motion errors in the MOtion COmpensation (MOCO approach based on the measurement of IMU/GPS. Aiming at the effects of target positioning error on MOCO for airborne interferometric SAR, the paper firstly deduces a mathematical model of residual motion error bring out by target positioning error under the condition of squint. And the paper analyzes the effects on the residual motion error caused by system sampling delay error, the Doppler center frequency error and reference DEM error which result in target positioning error based on the model. Then, the paper discusses the effects of the reference DEM error on the interferometric SAR image quality, the interferometric phase and the coherent coefficient. The research provides theoretical bases for the MOCO precision in signal processing of airborne high precision SAR and airborne repeat-pass interferometric SAR.

  13. Channel Measurements and Characteristics for Cooperative Positioning Applications

    DEFF Research Database (Denmark)

    Wang, Wei; Steinböck, Gerhard; Jost, Thomas

    2012-01-01

    We have conducted an indoor channel measurement campaign to characterize the propagation channel for the development of cooperative positioning algorithms. The campaign focused particularly on the characteristics of multi-link channels with applications to positioning. In this contribution we...... present the measurement campaign and preliminary results on correlation characteristics of the received power. It is observed that the link-pair log power is uncorrelated. Moreover, the received log power can be modeled by realizations of independent Gaussian distributions for each link, based...... on the measured results....

  14. Could positive affect help engineer robot control systems?

    Science.gov (United States)

    Quirin, Markus; Hertzberg, Joachim; Kuhl, Julius; Stephan, Achim

    2011-11-01

    Emotions have long been seen as counteracting rational thought, but over the last decades, they have been viewed as adaptive processes to optimize human (but also animal) behaviour. In particular, positive affect appears to be a functional aspect of emotions closely related to that. We argue that positive affect as understood in Kuhl's PSI model of the human cognitive architecture appears to have an interpretation in state-of-the-art hybrid robot control architectures, which might help tackle some open questions in the field.

  15. Effects of nursing position on transformational leadership practices.

    Science.gov (United States)

    Herman, Susan; Gish, Mary; Rosenblum, Ruth

    2015-02-01

    This study sought to identify significant differences in nursing leadership strengths by position title. Recent reports show aspects of transformational leadership (TL) related to position, age, and educational level. This study focuses on differentiating the strength of leadership practices across the range of nursing management positions. The Leadership Practices Inventory-Self-assessment survey, and a variety of demographic questions, were used to anonymously poll voluntary members of the Association of California Nurse Leaders. Nursing positions of director level and above were strongest in leadership practices. Those at manager and below were identified as needing additional leadership development. LPI-S subscales Enable Others to Act and Model the Way were strongest. Those at the manager level and below will benefit most from additional education and training. Even upper levels of management would gain from enhancing the LPI practices of Challenge the Process and Inspire a Shared Vision.

  16. A machine learning approach to the accurate prediction of multi-leaf collimator positional errors

    Science.gov (United States)

    Carlson, Joel N. K.; Park, Jong Min; Park, So-Yeon; In Park, Jong; Choi, Yunseok; Ye, Sung-Joon

    2016-03-01

    Discrepancies between planned and delivered movements of multi-leaf collimators (MLCs) are an important source of errors in dose distributions during radiotherapy. In this work we used machine learning techniques to train models to predict these discrepancies, assessed the accuracy of the model predictions, and examined the impact these errors have on quality assurance (QA) procedures and dosimetry. Predictive leaf motion parameters for the models were calculated from the plan files, such as leaf position and velocity, whether the leaf was moving towards or away from the isocenter of the MLC, and many others. Differences in positions between synchronized DICOM-RT planning files and DynaLog files reported during QA delivery were used as a target response for training of the models. The final model is capable of predicting MLC positions during delivery to a high degree of accuracy. For moving MLC leaves, predicted positions were shown to be significantly closer to delivered positions than were planned positions. By incorporating predicted positions into dose calculations in the TPS, increases were shown in gamma passing rates against measured dose distributions recorded during QA delivery. For instance, head and neck plans with 1%/2 mm gamma criteria had an average increase in passing rate of 4.17% (SD  =  1.54%). This indicates that the inclusion of predictions during dose calculation leads to a more realistic representation of plan delivery. To assess impact on the patient, dose volumetric histograms (DVH) using delivered positions were calculated for comparison with planned and predicted DVHs. In all cases, predicted dose volumetric parameters were in closer agreement to the delivered parameters than were the planned parameters, particularly for organs at risk on the periphery of the treatment area. By incorporating the predicted positions into the TPS, the treatment planner is given a more realistic view of the dose distribution as it will truly be

  17. Compatibility of Firm Positioning Strategy and Website Content: Highest

    Directory of Open Access Journals (Sweden)

    Evla MUTLU KESİCİ

    2017-07-01

    Full Text Available Corporate websites are essential platforms through which firms introduce their goods and services on B2B and B2C level, express financial information for the stakeholders and share corporate values, purposes and activities. Due to its facilities, websites take part in firm positioning strategy. Accordingly this study aims to understand the innovation oriented positioning through corporate websites. The method applied in this study has been adapted from the 2QCV2Q Model developed by Mich and Franch (2000 to evaluate websites and top 30 firms with the highest Research and Development expenditures listed in Turkishtime (2015 have been analyzed. Within this context, this study presents a revised and updated method for the assessments of websites through positioning strategy framework. Findings indicate no direct relationship between website evaluation and R&D expenditure, though some common weaknesses have been put forward, such as information about management of the firms. Besides, publicly traded firms are recognized to facilitate websites more efficiently than non-publicly traded firms. Study contribute to both academia and practitioners as putting forward a new approach for 2QCV2Q Model and indicating the similarities and differences among the corporate websites through positioning perspective.

  18. Positional Velar Fronting: An Updated Articulatory Account

    Science.gov (United States)

    Byun, Tara McAllister

    2012-01-01

    This study develops the hypothesis that the child-specific phenomenon of positional velar fronting can be modeled as the product of phonologically encoded articulatory limitations unique to immature speakers. Children have difficulty executing discrete tongue movements, preferring to move the tongue and jaw as a single unit. This predisposes the…

  19. Sustaining Air Force Space Systems: A Model for the Global Positioning System

    National Research Council Canada - National Science Library

    Snyder, Don; Mills, Patrick; Comanor, Katherine; Roll, Jr, Charles R

    2007-01-01

    ... and sustainment affect the performance of space systems. In this monograph, we develop a pilot framework for analyzing these and related questions in the ground segment of the Global Positioning System and recommend steps for implementing this framework...

  20. Positive and negative emotional eating have different associations with overeating and binge eating: Construction and validation of the Positive-Negative Emotional Eating Scale.

    Science.gov (United States)

    Sultson, Hedvig; Kukk, Katrin; Akkermann, Kirsti

    2017-09-01

    Research on emotional eating mostly focuses on negative emotions. Much less is known about how positive emotions relate to overeating and binge eating (BE). The aim of the current study was to construct a scale for positive and negative emotional eating and to assess its predictive validity. In study 1, the Positive-Negative Emotional Eating Scale (PNEES) was constructed and tested on 531 women, who also completed Eating Disorders Assessment Scale (EDAS). Results showed that a two-factor model constituting Positive emotional eating (PNEES-P) and Negative emotional eating (PNEES-N) fit the data well. PNEES-N also showed good convergent validity in assessing binge eating, correlating highly with EDAS subscale Binge eating. Further, a path analysis showed that after controlling for the mediating effect of PNEES-N, PNEES-P continued to significantly predict binge eating. In study 2 (N = 60), experience sampling method was used to assess overeating and BE in the natural environment. Palmtop computers were given to participants for a three-day study period that prompted them with questions regarding emotional experience, overeating, and BE. Results indicated that PNEES-P significantly predicted overeating, whereas PNEES-N predicted overeating and BE episodes only in a subsample of women who had experienced at least one overeating or BE episode. Thus, positive and negative emotional eating might have different relations with overeating and BE, with the latter being more characteristic of the severity/frequency of overeating and BE. New assessment tools that in addition to negative emotional eating also address positive emotional eating could be of potential help in planning intervention. Further, the tendency to overeat in response to positive emotions could be integrated into current models of eating disorders, especially when addressing relapse prevention. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. The practice of positive criminology: a Vipassana course in prison.

    Science.gov (United States)

    Ronel, Natti; Frid, Noa; Timor, Uri

    2013-02-01

    Positive criminology is a new term for a perspective associated with theories and models that relate to socially inclusive, positively experienced influences that assist individuals in desisting or refraining from criminal and deviant behavior. A qualitative phenomenological study of prisoners who were in recovery from substance dependency and who participated in a Vipassana course in a rehabilitative prison introduces features of positive criminology. A total of 22 male prisoners participated in a 10-day Vipassana course run by volunteers in prison. Deep interviews were conducted with participants before, immediately after, and 3 to 4 months after the course. The findings describe components of positive criminology that had meaningful impact on the prisoners in rehabilitation: perceived goodness, positive relationship with the prison staff, positive social atmosphere, and overcoming an ordeal. Implications for practice and further research are outlined.

  2. Efficient Interaction Recognition through Positive Action Representation

    Directory of Open Access Journals (Sweden)

    Tao Hu

    2013-01-01

    Full Text Available This paper proposes a novel approach to decompose two-person interaction into a Positive Action and a Negative Action for more efficient behavior recognition. A Positive Action plays the decisive role in a two-person exchange. Thus, interaction recognition can be simplified to Positive Action-based recognition, focusing on an action representation of just one person. Recently, a new depth sensor has become widely available, the Microsoft Kinect camera, which provides RGB-D data with 3D spatial information for quantitative analysis. However, there are few publicly accessible test datasets using this camera, to assess two-person interaction recognition approaches. Therefore, we created a new dataset with six types of complex human interactions (i.e., named K3HI, including kicking, pointing, punching, pushing, exchanging an object, and shaking hands. Three types of features were extracted for each Positive Action: joint, plane, and velocity features. We used continuous Hidden Markov Models (HMMs to evaluate the Positive Action-based interaction recognition method and the traditional two-person interaction recognition approach with our test dataset. Experimental results showed that the proposed recognition technique is more accurate than the traditional method, shortens the sample training time, and therefore achieves comprehensive superiority.

  3. Development of Bundle Position-Wise Linear Model for Predicting the Pressure Tube Diametral Creep in CANDU Reactors

    International Nuclear Information System (INIS)

    Lee, Jae Yong; Na, Man Gyun

    2011-01-01

    Diametral creep of the pressure tube (PT) is one of the principal aging mechanisms governing the heat transfer and hydraulic degradation of a heat transport system. PT diametral creep leads to diametral expansion that affects the thermal hydraulic characteristics of the coolant channels and the critical heat flux. Therefore, it is essential to predict the PT diametral creep in CANDU reactors, which is caused mainly by fast neutron irradiation, reactor coolant temperature and so forth. The currently used PT diametral creep prediction model considers the complex interactions between the effects of temperature and fast neutron flux on the deformation of PT zirconium alloys. The model assumes that long-term steady-state deformation consists of separable, additive components from thermal creep, irradiation creep and irradiation growth. This is a mechanistic model based on measured data. However, this model has high prediction uncertainty. Recently, a statistical error modeling method was developed using plant inspection data from the Bruce B CANDU reactor. The aim of this study was to develop a bundle position-wise linear model (BPLM) to predict PT diametral creep employing previously measured PT diameters and HTS operating conditions. There are twelve bundles in a fuel channel and for each bundle, a linear model was developed by using the dependent variables, such as the fast neutron fluxes and the bundle temperatures. The training data set was selected using the subtractive clustering method. The data of 39 channels that consist of 80 percent of a total of 49 measured channels from Units 2, 3 and 4 were used to develop the BPLM models. The remaining 10 channels' data were used to test the developed BPLM models. The BPLM was optimized by the maximum likelihood estimation method. The developed BPLM to predict PT diametral creep was verified using the operating data gathered from the Units 2,3 and 4 in Korea. Two error components for the BPLM, which are the epistemic

  4. Job analysis of the maintenance supervisor and instrument and control supervisor positions for the nuclear power plant maintenance personnel reliability model

    International Nuclear Information System (INIS)

    Bartter, W.D.; Siegel, A.I.; Federman, P.J.

    1982-11-01

    The present report presents the results of an analysis of the jobs of maintenance mechanic supervisors and instrument and control technician supervisors in nuclear power plants. Such an analysis was considered to be a necessary step in defining the scope and focus of a model for predicting and analyzing nuclear power maintenance reliability. The model will focus upon tasks and subtasks performed by various job positions. The results of this job analysis, along with the results of a survey of user needs vis-a-vis such a model and the results of parallel analyses of the job of maintenance mechanics and of instrument and control technicians provide the sound foundation on which such a model may be built. Job analysis possesses implications for a number of purposes. It provides insight into selection standards, job structuring and organization, performance analysis, training objective establishment, and training content derivation. Accordingly, the results of the present work possess implications for a variety of interest areas relative to safe and efficient operation of nuclear power plants

  5. A model for prediction of fume formation rate in gas metal arc welding (GMAW), globular and spray modes, DC electrode positive.

    Science.gov (United States)

    Dennis, J H; Hewitt, P J; Redding, C A; Workman, A D

    2001-03-01

    Prediction of fume formation rate during metal arc welding and the composition of the fume are of interest to occupational hygienists concerned with risk assessment and to manufacturers of welding consumables. A model for GMAW (DC electrode positive) is described based on the welder determined process parameters (current, wire feed rate and wire composition), on the surface area of molten metal in the arc and on the partial vapour pressures of the component metals of the alloy wire. The model is applicable to globular and spray welding transfer modes but not to dip mode. Metal evaporation from a droplet is evaluated for short time increments and total evaporation obtained by summation over the life of the droplet. The contribution of fume derived from the weld pool and spatter (particles of metal ejected from the arc) is discussed, as are limitations of the model. Calculated droplet temperatures are similar to values determined by other workers. A degree of relationship between predicted and measured fume formation rates is demonstrated but the model does not at this stage provide a reliable predictive tool.

  6. Simulation of longitudinal dynamics of long freight trains in positioning operations

    Science.gov (United States)

    Qi, Zhaohui; Huang, Zhihao; Kong, Xianchao

    2012-09-01

    Positioning operations are performed in a railway goods yard, in which the freight train is pulled precisely at a specific point by a positioner. The positioner moves strictly according to the predesigned speed and provides all the traction and braking forces which are highly dependent on the longitudinal dynamic response. In order to improve the efficiency and protect the wagons from damage during positioning operations, the design speed of the positioner has to be optimised based on the simulation of longitudinal train dynamics. However, traditional models of longitudinal train dynamics are not accurate enough in some aspects. In this study, we make some changes in the traditional theory to make it suitable for the study of long freight trains in positioning operations. In the proposed method, instead of the traction force on the train, the motion of the positioner is assumed to be known; more importantly, the traditional draft gear model with nonlinear spring and linear damping is replaced by a more detailed model based on the achievement of contact and impact mechanics; the switching effects of the resistance and the coupler slack are also taken into consideration. Numerical examples that deal with positioning operations on the straight lines, slope lines and curving lines are given.

  7. Modelling News Media Use. Positing and applying the MC/GC model to the analysis of media use in everyday life and crisis situations

    DEFF Research Database (Denmark)

    Westlund, Oscar; Ghersetti, Marina

    2014-01-01

    The contemporary mediascape offers a plethora of news media and social media, which people can turn to in everyday life and during a crisis. The characteristics of media vary, providing different logics and affordances, and occupying different niches in time and space (medium-centric (MC) approach......). Generations develop routinized media usage patterns in the formative phases of their lives, which they often maintain in their daily habits in everyday life (generation-centric (GC) approach). Crisis events in the vicinity, such as gas emissions, terrorist attacks, pandemics and earthquakes, presumably ignite...... an augmented interest for information and news on the events that may cause a destabilization of established media usage routines. This article aims to conceptualize, describe and explain how four generations envision their media use during such crises. The article posits the MC/GC-model, a 2x2 matrix...

  8. Accurate position estimation methods based on electrical impedance tomography measurements

    Science.gov (United States)

    Vergara, Samuel; Sbarbaro, Daniel; Johansen, T. A.

    2017-08-01

    Electrical impedance tomography (EIT) is a technology that estimates the electrical properties of a body or a cross section. Its main advantages are its non-invasiveness, low cost and operation free of radiation. The estimation of the conductivity field leads to low resolution images compared with other technologies, and high computational cost. However, in many applications the target information lies in a low intrinsic dimensionality of the conductivity field. The estimation of this low-dimensional information is addressed in this work. It proposes optimization-based and data-driven approaches for estimating this low-dimensional information. The accuracy of the results obtained with these approaches depends on modelling and experimental conditions. Optimization approaches are sensitive to model discretization, type of cost function and searching algorithms. Data-driven methods are sensitive to the assumed model structure and the data set used for parameter estimation. The system configuration and experimental conditions, such as number of electrodes and signal-to-noise ratio (SNR), also have an impact on the results. In order to illustrate the effects of all these factors, the position estimation of a circular anomaly is addressed. Optimization methods based on weighted error cost functions and derivate-free optimization algorithms provided the best results. Data-driven approaches based on linear models provided, in this case, good estimates, but the use of nonlinear models enhanced the estimation accuracy. The results obtained by optimization-based algorithms were less sensitive to experimental conditions, such as number of electrodes and SNR, than data-driven approaches. Position estimation mean squared errors for simulation and experimental conditions were more than twice for the optimization-based approaches compared with the data-driven ones. The experimental position estimation mean squared error of the data-driven models using a 16-electrode setup was less

  9. Relation of Positive and Negative Parenting to Children’s Depressive Symptoms

    OpenAIRE

    Dallaire, Danielle H.; Pineda, Ashley Q.; Cole, David A.; Ciesla, Jeffrey A.; Jacquez, Farrah; LaGrange, Beth; Bruce, Alanna E.

    2006-01-01

    This study examined the combined and cumulative effects of supportive–positive and harsh–negative parenting behaviors on children’s depressive symptoms. A diverse sample of 515 male and female elementary and middle school students (ages 7 to 11) and their parents provided reports of the children’s depressive symptoms. Parents provided self-reports of supportive–positive and harsh–negative parenting behaviors. Structural equation modeling indicated that supportive–positive and harsh–negative p...

  10. Position Control of a Pneumatic Muscle Actuator Using RBF Neural Network Tuned PID Controller

    Directory of Open Access Journals (Sweden)

    Jie Zhao

    2015-01-01

    Full Text Available Pneumatic Muscle Actuator (PMA has a broad application prospect in soft robotics. However, PMA has highly nonlinear and hysteretic properties among force, displacement, and pressure, which lead to difficulty in accurate position control. A phenomenological model is developed to portray the hysteretic behavior of PMA. This phenomenological model consists of linear component and hysteretic component force. The latter component is described by Duhem model. An experimental apparatus is built up and sets of experimental data are acquired. Based on the experimental data, parameters of the model are identified. Validation of the model is performed. Then a novel cascade position PID controller is devised for a 1-DOF manipulator actuated by PMA. The outer loop of the controller is to cope with position control whilst the inner loop deals with pressure dynamics within PMA. To enhance the adaptability of the PID algorithm to the high nonlinearities of the manipulator, PID parameters are tuned online using RBF Neural Network. Experiments are performed and comparison between position response of RBF Neural Network based PID controller and that of classic PID controller demonstrates the effectiveness of the novel adaptive controller on the manipulator.

  11. Oil shocks in New Keynesian models: Positive and normative implications

    Science.gov (United States)

    Chang, Jian

    Chapter 1 investigates optimal monetary policy response towards oil shocks in a New Keynesian model. We find that optimal policy, in general, becomes contractionary in response to an adverse oil shock. However, the optimal policy rule and the inflation-output trade-off depend on the specific structure of the model. The benchmark economy consists of a flexible-price energy sector and a sticky-price manufacturing sector where energy is used as an intermediate input. We show that optimal policy is to stabilize the sticky (core) price level. We then show that after incorporating a less oil-dependent sticky-price service sector, the model exhibits a trade-off in stabilizing prices and output gaps in the different sticky-price sectors. It predicts that central bank should not try to stabilize the core price level, and the economy will experience higher inflation and rising output gaps, even if central banks respond optimally. Chapter 2 addresses the observed volatility and persistence of real exchange rates and the terms of trade. It contributes to the literature with a quantitative study on the U.S. and Canada. A two-country New Keynesian model consisting of traded, non-traded, and oil production sectors is proposed to examine the time series properties of the real exchange rate, the terms of trade and the real oil price. We find that after incorporating several realistic features (namely oil price shocks, sector specific labor, non-traded goods, asymmetric pricing decisions of exporters and asymmetric consumer preferences over tradables), the benchmark model broadly matches the volatilities of the relative prices and some business cycle correlations. The model matches the data more closely after adding real demand shocks, suggesting their importance in explaining the relative price movements between the US and Canada. Chapter 3 explores several sources and transmission channels of international relative price movements. In particular, we elaborate on the role of

  12. Dynamic tracking performance of indoor global positioning system: An experimental and theoretical study

    Directory of Open Access Journals (Sweden)

    Gang Zhao

    2015-10-01

    Full Text Available The automation level has been improved rapidly with the introduction of large-scale measurement technologies, such as indoor global positioning system, into the production process among the fields of car, ship, and aerospace due to their excellent measurement characteristics. In fact, the objects are usually in motion during the real measurement process; however, the dynamic measurement characteristics of indoor global positioning system are much limited and still in exploration. In this research, we focused on the dynamic tracking performance of indoor global positioning system and then successfully built a mathematical model based on its measurement principles. We first built single and double station system models with the consideration of measurement objects’ movement. Using MATLAB simulation, we realized the dynamic measurement characteristics of indoor global positioning system. In the real measurement process, the experimental results also support the mathematical model that we built, which proves a great success in dynamic measurement characteristics. We envision that this dynamic tracking performance of indoor global positioning system would shed light on the dynamic measurement of a motion object and therefore make contribution to the automation production.

  13. Why victimology should stay positive: The ongoing need for positive victimology

    Directory of Open Access Journals (Sweden)

    Ronel Natti

    2015-01-01

    Full Text Available This paper presents the need for positive victimology and its unique contribution to victimology. Victimology presented a shift in attention and awareness in practice, research and theory, by focusing on victims of crime and of abuse of power, and on victims’ rights and victims’ services. Positive victimology indicates a more specified shift in attention and awareness, within the larger shift of victimology. This shift stands in line with positive psychology, positive criminology and the idea of victims’ victimology. It denotes an approach to provide the following, as much as possible: 1. A wide range of social responses to the victims and their victimization that victims can experience as positive, 2. Positive outcomes of healing and recovery for victims, and 3. Positive integration of victims. Within each of those, positive victimology suggests a pragmatic coordinated system that ranges from definitions of negative poles to those of positive ones. When moving towards the positive pole at any given coordinate, a sense of justice is an important factor that might reduce the impact of the harm. Support is also a crucial factor and at the very positive pole, stands human, inter-personal love.

  14. Effect of screw position on single cycle to failure in bending and torsion of a locking plate-rod construct in a synthetic feline femoral gap model.

    Science.gov (United States)

    Niederhäuser, Simone K; Tepic, Slobodan; Weber, Urs T

    2015-05-01

    To evaluate the effect of screw position on strength and stiffness of a combination locking plate-rod construct in a synthetic feline femoral gap model. 30 synthetic long-bone models derived from beechwood and balsa wood. 3 constructs (2 locking plate-rod constructs and 1 locking plate construct; 10 specimens/construct) were tested in a diaphyseal bridge plating configuration by use of 4-point bending and torsion. Variables included screw position (near the fracture gap and far from the fracture gap) and application of an intramedullary pin. Constructs were tested to failure in each loading mode to determine strength and stiffness. Failure was defined as plastic deformation of the plate or breakage of the bone model or plate. Strength, yield angle, and stiffness were compared by use of a Wilcoxon test. Placement of screws near the fracture gap did not increase bending or torsional stiffness in the locking plate-rod constructs, assuming the plate was placed on the tension side of the bone. Addition of an intramedullary pin resulted in a significant increase in bending strength of the construct. Screw positioning did not have a significant effect on any torsion variables. Results of this study suggested that, in the investigated plate-rod construct, screw insertion adjacent to the fracture lacked mechanical advantages over screw insertion at the plate ends. For surgeons attempting to minimize soft tissue dissection, the decision to make additional incisions for screw placement should be considered with even more caution.

  15. Bds/gps Integrated Positioning Method Research Based on Nonlinear Kalman Filtering

    Science.gov (United States)

    Ma, Y.; Yuan, W.; Sun, H.

    2017-09-01

    In order to realize fast and accurate BDS/GPS integrated positioning, it is necessary to overcome the adverse effects of signal attenuation, multipath effect and echo interference to ensure the result of continuous and accurate navigation and positioning. In this paper, pseudo-range positioning is used as the mathematical model. In the stage of data preprocessing, using precise and smooth carrier phase measurement value to promote the rough pseudo-range measurement value without ambiguity. At last, the Extended Kalman Filter(EKF), the Unscented Kalman Filter(UKF) and the Particle Filter(PF) algorithm are applied in the integrated positioning method for higher positioning accuracy. The experimental results show that the positioning accuracy of PF is the highest, and UKF is better than EKF.

  16. Remote handling dynamical modelling: assessment on new approach to enhance positioning accuracy with heavy load manipulation

    International Nuclear Information System (INIS)

    Gagarina-Sasia, T.; David, O.; Dubus, G.; Perrot, Y.; Riwain, A.

    2007-01-01

    In vessel maintenance work in Fusion Tokamak will be carried out with help several sets of robotic devices. Heavy loads handling in constrained space is identified by all players of the RH community as a key-issue in the latest Fusion Tokamak facilities. To deal with high-level dexterity tasks, high payload to mass ratio and limited operating space, RH equipment designers can only propose systems whose mechanical flexibility is no longer negligible and need to be taken into account in the control scheme. Traditional approaches where control system only includes a linear model of deformation of the structure leads to poor positioning accuracy. Uncontrolled or under evaluated errors could be damaging for in-vessel components during maintenance operations in the Tokamak facility. To address the control of complex flexible systems, we will investigate the use of specific mechanical software that combines both finite element and kinematical joints analyses, with a strong-coupled formulation, to perform system dynamics simulations. This procedure will be applied on a single axis mock up robotic joint with highly flexible structure. A comparison of experimental results with the traditional linear approach and the specified software model will be carried out. Benefits introduced by this new approach will finally be assessed in view of RH design or specification in the field of RH in Fusion Tokamak scale such as ITER. (orig.)

  17. The Application of Barnes Filter to Positioning the Center of Landed Tropical Cyclone in Numerical Models

    Directory of Open Access Journals (Sweden)

    Haibo Zou

    2018-01-01

    Full Text Available After a tropical cyclone (TC making landfall, the numerical model output sea level pressure (SLP presents many small-scale perturbations which significantly influence the positioning of the TC center. To fix the problem, Barnes filter with weighting parameters C=2500 and G=0.35 is used to remove these perturbations. A case study of TC Fung-Wong which landed China in 2008 shows that Barnes filter not only cleanly removes these perturbations, but also well preserves the TC signals. Meanwhile, the centers (track obtained from SLP processed with Barnes filter are much closer to the observations than that from SLP without Barnes filter. Based on the distance difference (DD between the TC center determined by SLP with/without Barnes filter and observation, statistics analysis of 12 TCs which landed China during 2005–2015 shows that in most cases (about 85% the DDs are small (between −30 km and 30 km, while in a few cases (about 15% the DDs are large (greater than 30 km even 70 km. This further verifies that the TC centers identified from SLP with Barnes filter are more accurate compared to that directly obtained from model output SLP. Moreover, the TC track identified with Barnes filter is much smoother than that without Barnes filter.

  18. Positive and Negative Peer Influence in Residential Care.

    Science.gov (United States)

    Huefner, Jonathan C; Smith, Gail L; Stevens, Amy L

    2017-10-13

    The potential for negative peer influence has been well established in research, and there is a growing interest in how positive peer influence also impacts youth. No research, however, has concurrently examined positive and negative peer influence in the context of residential care. Clinical records for 886 residential care youth were used in a Hierarchical Linear Model analysis to examine the impact of negative and positive peer influence on naturally occurring patterns of serious problem behavior over time. Negative peer influence, where the majority of youth in a home manifested above the average number of serious behavior problems, occurred 13.7% of the time. Positive peer influence, where the majority of youth manifested no serious problem behaviors for the month, occurred 47.7% of the time. Overall, youth problem behavior improved over time. There were significantly lower rates of serious problem behavior in target youth during positive peer influence months. Conversely, there were significantly higher rates of serious problem behaviors in target youth during negative peer influence months. Negative peer influence had a relatively greater impact on target peers' serious behavior problems than did positive peer influence. Caregiver experience significantly reduced the impact of negative peer influence, but did not significantly augment positive peer influence. Months where negative peer influence was combined with inexperienced caregivers produced the highest rates of serious problem behavior. Our results support the view that residential programs for troubled youth need to create circumstances that promote positive and control for negative peer influence.

  19. A Model of Market Positioning of Destinations Based on Online Customer Reviews of Lodgings

    Directory of Open Access Journals (Sweden)

    Manuel Rodríguez-Díaz

    2017-12-01

    Full Text Available The aim of this study is to develop a methodology to determine the competitive online positioning of lodging companies in different tourist destinations. The rise of the digital age has allowed many customers to share their opinions through specialized websites, providing a dynamic and constantly updated evaluation of the market. In this context, competitiveness is an essential factor in the economic sustainability of destinations. The competitive positioning of destinations is determined by the scale of variables used by Booking.com. The price and lodging category variables are also used, as well as three new variables derived from the initial scale: the quality average, value and added value. This methodology provides a tool to determine the level of competitiveness of the lodging offered in tourist destinations, based on which, actions can be taken to improve destinations’ positioning.

  20. Ironless Inductive Position Sensor for Harsh Magnetic Environments

    CERN Document Server

    Danisi, Alessandro; Masi, Alessandro

    Linear Variable Differential Transformers (LVDTs) are widely used for high-precision and high-accuracy linear position sensing in harsh environments, such as the LHC collimators at CERN. These sensors guarantee theoretically infinite resolution and long lifetimes thanks to contactless sensing. Furthermore, they offer very good robustness and ruggedness, as well as micrometer uncertainty over a range of centimeters when proper conditioning techniques are used (such as the three-parameter Sine-Fit algorithm). They can also be suitable for radioactive environments. Nevertheless, an external DC/slowly-varying magnetic field can seriously affect the LVDT reading, leading to position drifts of hundreds of micrometers, often unacceptable in high-accuracy applications. The effect is due to the presence of non-linear ferromagnetic materials in the sensor’s structure. A detailed Finite Element model of an LVDT is first proposed in order to study and characterize the phenomenon. The model itself becomes a powerful de...

  1. Multi-technology positioning

    CERN Document Server

    Lohan, Elena-Simona; Wymeersch, Henk; Seco-Granados, Gonzalo; Nykänen, Ossi

    2017-01-01

    This book provides an overview of positioning technologies, applications and services in a format accessible to a wide variety of readers. Readers who have always wanted to understand how satellite-based positioning, wireless network positioning, inertial navigation, and their combinations work will find great value in this book. Readers will also learn about the advantages and disadvantages of different positioning methods, their limitations and challenges. Cognitive positioning, adding the brain to determine which technologies to use at device runtime, is introduced as well. Coverage also includes the use of position information for Location Based Services (LBS), as well as context-aware positioning services, designed for better user experience. • Brings understanding of positioning technology to readers from a variety of disciplines • Reviews multiple techniques, providing insight on the pros, cons and challenges related to each • Designed to be a tutorial on basic principles, avoiding unnecessary de...

  2. Scale-Up of Safe & Civil Schools' Model for School-Wide Positive Behavioral Interventions and Supports

    Science.gov (United States)

    Smolkowski, Keith; Strycker, Lisa; Ward, Bryce

    2016-01-01

    This study evaluated the scale-up of a Safe & Civil Schools "Foundations: Establishing Positive Discipline Policies" positive behavioral interventions and supports initiative through 4 years of "real-world" implementation in a large urban school district. The study extends results from a previous randomized controlled trial…

  3. Robust independent modal space control of a coupled nano-positioning piezo-stage

    Science.gov (United States)

    Zhu, Wei; Yang, Fufeng; Rui, Xiaoting

    2018-06-01

    In order to accurately control a coupled 3-DOF nano-positioning piezo-stage, this paper designs a hybrid controller. In this controller, a hysteresis observer based on a Bouc-Wen model is established to compensate the hysteresis nonlinearity of the piezoelectric actuator first. Compared to hysteresis compensations using Preisach model and Prandt-Ishlinskii model, the compensation method using the hysteresis observer is computationally lighter. Then, based on the proposed dynamics model, by constructing the modal filter, a robust H∞ independent modal space controller is designed and utilized to decouple the piezo-stage and deal with the unmodeled dynamics, disturbance, and hysteresis compensation error. The effectiveness of the proposed controller is demonstrated experimentally. The experimental results show that the proposed controller can significantly achieve the high-precision positioning.

  4. On Hamiltonians with position-dependent mass from Kaluza–Klein compactifications

    Energy Technology Data Exchange (ETDEWEB)

    Ballesteros, Ángel, E-mail: angelb@ubu.es; Gutiérrez-Sagredo, Iván, E-mail: igsagredo@ubu.es; Naranjo, Pedro, E-mail: pnaranjo@ubu.es

    2017-02-19

    In a recent paper (Morris (2015) ), an inhomogeneous compactification of the extra dimension of a five-dimensional Kaluza–Klein metric has been shown to generate a position-dependent mass (PDM) in the corresponding four-dimensional system. As an application of this dimensional reduction mechanism, a specific static dilatonic scalar field has been connected with a PDM Lagrangian describing a well-known nonlinear PDM oscillator. Here we present more instances of this construction that lead to PDM systems with radial symmetry, and the properties of their corresponding inhomogeneous extra dimensions are compared with the ones in the nonlinear oscillator model. Moreover, it is also shown how the compactification introduced in this type of models can alternatively be interpreted as a novel mechanism for the dynamical generation of curvature. - Highlights: • New position-dependent mass systems arising from inhomogeneous Kaluza–Klein compactifications are presented. • Connections with known integrable position-dependent mass systems are established. • A novel mechanism for the dynamical generation of curvature is proposed.

  5. A Psychometric Evaluation of the Dutch Version of the Responses to Positive Affect Questionnaire

    Directory of Open Access Journals (Sweden)

    Filip Raes

    2010-12-01

    Full Text Available In 698 respondents selected from the community, the authors examined the psychometric properties of the Dutch version of the Responses to Positive Affect questionnaire (RPA; Feldman, Joormann, & Johnson, 2008 which measures ruminative and dampening thoughts in response to positive affect. In a first sample ('n' = 170, exploratory factor analyses largely replicated the 3-factor model obtained by Feldman et al. (2008 with the following factors: Dampening, Self-focused positive rumination, and Emotion-focused positive rumination. The 3-factor model revealed in the first sample was confirmed using confirmatory factor analyses in a second independent sample of 528 respondents. All subscales showed adequate internal consistency and evidence of convergent and incremental validity with concurrent measures of depressive rumination, depressive symptoms, trait hypomania, and positive and negative affect. Results underscore the value of assessing responses to positive as well as negative affect in the study of mood disorders.

  6. Peer Positive Social Control and Men's Health-Promoting Behaviors.

    Science.gov (United States)

    Houle, Janie; Meunier, Sophie; Coulombe, Simon; Mercerat, Coralie; Gaboury, Isabelle; Tremblay, Gilles; de Montigny, Francine; Cloutier, Lyne; Roy, Bernard; Auger, Nathalie; Lavoie, Brigitte

    2017-09-01

    Men are generally thought to be less inclined to take care of their health. To date, most studies about men's health have focused on deficits in self-care and difficulties in dealing with this sphere of their life. The present study reframes this perspective, using a salutogenic strengths-based approach and seeking to identify variables that influence men to take care of their health, rather than neglect it. This study focuses on the association between peer positive social control and men's health behaviors, while controlling for other important individual and social determinants (sociodemographic characteristics, health self-efficacy, home neighborhood, spousal positive social control, and the restrictive emotionality norm). In a mixed-method study, 669 men answered a self-reported questionnaire, and interviews were conducted with a maximum variation sample of 31 men. Quantitative results indicated that, even after controlling for sociodemographic variables and other important factors, peer positive social control was significantly associated with the six health behaviors measured in the study (health responsibility, nutrition, physical activity, interpersonal relations, stress management, and spirituality). Interview results revealed that peer positive social control influenced men's health behaviors through three different mechanisms: shared activity, being inspired, and serving as a positive role model for others. In summary, friends and coworkers could play a significant role in promoting various health behaviors among adult men in their daily life. Encouraging men to socialize and discuss health, and capitalizing on healthy men as role models appear to be effective ways to influence health behavior adoption among this specific population.

  7. Using modeling and vicarious reinforcement to produce more positive attitudes toward mental health treatment.

    Science.gov (United States)

    Buckley, Gary I; Malouff, John M

    2005-05-01

    In this study, the authors evaluated the effectiveness of a video, developed for this study and using principles of cognitive learning theory, to produce positive attitudinal change toward mental health treatment. The participants were 35 men and 45 women who were randomly assigned to watch either an experimental video, which included 3 positive 1st-person accounts of psychotherapy or a control video that focused on the psychological construct of self. Pre-intervention, post-intervention, and 2-week follow-up levels of attitude toward mental health treatment were measured using the Attitude Toward Seeking Professional Help Scale (E. H. Fischer & J. L. Turner, 1970). The experimental video group showed a significantly greater increase in positive attitude than did the control group. These results support the effectiveness of using the vicarious reinforcement elements of cognitive learning theory as a basis for changing attitudes toward mental health treatment.

  8. Recepción radial sensacionalista En jóvenes de cartagena de indias

    Directory of Open Access Journals (Sweden)

    Luis Carlos Zúñiga Liñán

    2014-05-01

    Full Text Available Este artículo contiene los resultados de una investigación que indaga sobre la influencia de la experiencia social de los jóvenes entre 20 y 24 años, a partir de la significación de los mensajes difundidos por los noticieros radiales de corte sensacionalista en Cartagena de Indias (Colombia. Para ello, se articularon las categorías de la teoría del Interaccionismo Simbólico desde la visión de George Mead y Herbert Blumer, mediante un abordaje de corte cualitativo que intenta identificar las asociaciones discursivas. Los resultados fueron cruzados con la intención del emisor de los mensajes, lo que permitió encontrar que el lenguaje característico de estos formatos no siempre genera un proceso de influencia mutua.

  9. RECEPCIÓN RADIAL SENSACIONALISTA EN JÓVENES DE CARTAGENA DE INDIAS

    Directory of Open Access Journals (Sweden)

    Luis Carlos Zúñiga Liñán

    2014-01-01

    Full Text Available Este artículo contiene los resultados de una investigación que indaga sobre la influencia de la experiencia social de los jóvenes entre 20 y 24 años, a partir de la significación de los mensajes difundidos por los noticieros radiales de corte sensacionalista en Cartagena de Indias (Colombia. Para ello, se articularon las categorías de la teoría del Interaccionismo Simbólico desde la visión de George Mead y Herbert Blumer, mediante un abordaje de corte cualitativo que intenta identificar las asociaciones discursivas. Los resultados fueron cruzados con la intención del emisor de los mensajes, lo que permitió encontrar que el lenguaje característico de estos formatos no siempre genera un proceso de influencia mutua.

  10. Make Sense?

    DEFF Research Database (Denmark)

    Gyrd-Jones, Richard; Törmälä, Minna

    Purpose: An important part of how we sense a brand is how we make sense of a brand. Sense-making is naturally strongly connected to how we cognize about the brand. But sense-making is concerned with multiple forms of knowledge that arise from our interpretation of the brand-related stimuli......: Declarative, episodic, procedural and sensory. Knowledge is given meaning through mental association (Keller, 1993) and / or symbolic interaction (Blumer, 1969). These meanings are centrally related to individuals’ sense of identity or “identity needs” (Wallpach & Woodside, 2009). The way individuals make...... sense of brands is related to who people think they are in their context and this shapes what they enact and how they interpret the brand (Currie & Brown, 2003; Weick, Sutcliffe, & Obstfeld, 2005; Weick, 1993). Our subject of interest in this paper is how stakeholders interpret and ascribe meaning...

  11. Testing Comprehensive Models of Disclosure of Sexual Orientation in HIV-Positive Latino Men Who Have Sex with Men (MSM)

    Science.gov (United States)

    Lechuga, Julia; Zea, María Cecilia

    2012-01-01

    Individuals who disclose their sexual orientation are more likely to also disclose their HIV status. Disclosure of HIV-serostatus is associated with better health outcomes. The goal of this study was to build and test comprehensive models of sexual orientation that included 8 theory-informed predictors of disclosure to mothers, fathers, and closest friends in a sample of HIV-positive Latino gay and bisexual men. US acculturation, gender non-conformity to hegemonic masculinity in self-presentation, comfort with sexual orientation, gay community involvement, satisfaction with social support, sexual orientation and gender of the closest friend emerged as significant predictors of disclosure of sexual orientation. PMID:22690708

  12. Position Information

    Data.gov (United States)

    Social Security Administration — The Position Information Data Asset provides the ability to search for active SSA position descriptions using various search criteria. An individual may search by PD...

  13. Modeling and simulation of tumor-influenced high resolution real-time physics-based breast models for model-guided robotic interventions

    Science.gov (United States)

    Neylon, John; Hasse, Katelyn; Sheng, Ke; Santhanam, Anand P.

    2016-03-01

    Breast radiation therapy is typically delivered to the patient in either supine or prone position. Each of these positioning systems has its limitations in terms of tumor localization, dose to the surrounding normal structures, and patient comfort. We envision developing a pneumatically controlled breast immobilization device that will enable the benefits of both supine and prone positioning. In this paper, we present a physics-based breast deformable model that aids in both the design of the breast immobilization device as well as a control module for the device during every day positioning. The model geometry is generated from a subject's CT scan acquired during the treatment planning stage. A GPU based deformable model is then generated for the breast. A mass-spring-damper approach is then employed for the deformable model, with the spring modeled to represent a hyperelastic tissue behavior. Each voxel of the CT scan is then associated with a mass element, which gives the model its high resolution nature. The subject specific elasticity is then estimated from a CT scan in prone position. Our results show that the model can deform at >60 deformations per second, which satisfies the real-time requirement for robotic positioning. The model interacts with a computer designed immobilization device to position the breast and tumor anatomy in a reproducible location. The design of the immobilization device was also systematically varied based on the breast geometry, tumor location, elasticity distribution and the reproducibility of the desired tumor location.

  14. An investigation of false positive dosimetry results

    International Nuclear Information System (INIS)

    Lewandowski, M.A.; Davis, S.A.; Goff, T.E.; Wu, C.F.

    1996-01-01

    The Waste Isolation Pilot Plant (WIPP) is a facility designed for the demonstration of the safe disposal of transuranic waste. Currently, the radiation source term is confined to sealed calibration and check sources since WIPP has not received waste for disposal. For several years the WIPP Dosimetry Group has operated a Harshaw Model 8800C reader to analyze Harshaw 8801-7776 thermoluminescent cards (3 TLD-700 and 1 TLD-600) with 8805 holder. The frequency of false positive results for quarterly dosimeter exchanges is higher than desired by the Dosimetry Group management. Initial observations suggested that exposure to intense ambient sunlight may be responsible for the majority of the false positive readings for element 3. A study was designed to investigate the possibility of light leaking through the holder and inducing a signal in element 3. This paper discusses the methods and results obtained, with special emphasis placed on recommendations to reduce the frequency of light-induced false positive readings

  15. Computer-aided position planning of miniplates to treat facial bone defects.

    Directory of Open Access Journals (Sweden)

    Jan Egger

    Full Text Available In this contribution, a software system for computer-aided position planning of miniplates to treat facial bone defects is proposed. The intra-operatively used bone plates have to be passively adapted on the underlying bone contours for adequate bone fragment stabilization. However, this procedure can lead to frequent intra-operatively performed material readjustments especially in complex surgical cases. Our approach is able to fit a selection of common implant models on the surgeon's desired position in a 3D computer model. This happens with respect to the surrounding anatomical structures, always including the possibility of adjusting both the direction and the position of the used osteosynthesis material. By using the proposed software, surgeons are able to pre-plan the out coming implant in its form and morphology with the aid of a computer-visualized model within a few minutes. Further, the resulting model can be stored in STL file format, the commonly used format for 3D printing. Using this technology, surgeons are able to print the virtual generated implant, or create an individually designed bending tool. This method leads to adapted osteosynthesis materials according to the surrounding anatomy and requires further a minimum amount of money and time.

  16. Computer-aided position planning of miniplates to treat facial bone defects

    Science.gov (United States)

    Wallner, Jürgen; Gall, Markus; Chen, Xiaojun; Schwenzer-Zimmerer, Katja; Reinbacher, Knut; Schmalstieg, Dieter

    2017-01-01

    In this contribution, a software system for computer-aided position planning of miniplates to treat facial bone defects is proposed. The intra-operatively used bone plates have to be passively adapted on the underlying bone contours for adequate bone fragment stabilization. However, this procedure can lead to frequent intra-operatively performed material readjustments especially in complex surgical cases. Our approach is able to fit a selection of common implant models on the surgeon’s desired position in a 3D computer model. This happens with respect to the surrounding anatomical structures, always including the possibility of adjusting both the direction and the position of the used osteosynthesis material. By using the proposed software, surgeons are able to pre-plan the out coming implant in its form and morphology with the aid of a computer-visualized model within a few minutes. Further, the resulting model can be stored in STL file format, the commonly used format for 3D printing. Using this technology, surgeons are able to print the virtual generated implant, or create an individually designed bending tool. This method leads to adapted osteosynthesis materials according to the surrounding anatomy and requires further a minimum amount of money and time. PMID:28817607

  17. Spin-flip induced magnetoresistance in positionally disordered organic solids.

    Science.gov (United States)

    Harmon, N J; Flatté, M E

    2012-05-04

    A model for magnetoresistance in positionally disordered organic materials is presented and solved using percolation theory. The model describes the effects of spin dynamics on hopping transport by considering changes in the effective density of hopping sites, a key quantity determining the properties of percolative transport. Faster spin-flip transitions open up "spin-blocked" pathways to become viable conduction channels and hence produce magnetoresistance. Features of this percolative magnetoresistance can be found analytically in several regimes, and agree with previous measurements, including the sensitive dependence of the magnetic-field dependence of the magnetoresistance on the ratio of the carrier hopping time to the hyperfine-induced carrier spin precession time. Studies of magnetoresistance in known systems with controllable positional disorder would provide an additional stringent test of this theory.

  18. Psychometric properties of the positivity scale - Brazilian version

    Directory of Open Access Journals (Sweden)

    Juliane Callegaro Borsa

    2015-03-01

    Full Text Available This study presents the psychometric properties of the Brazilian version of the Positivity Scale (P-Scale. Participants were 730 subjects (65% women, aged from 17 to 70 years old (M = 31.0 years; SD = 11.43, from 21 Brazilian states. The sample was randomly split in two halves to cross-validate the results. With the first half of the sample (n1 = 365, an exploratory factor analysis (EFA was conducted. With the second half of the sample (n2 = 365, a confirmatory factor analysis (CFA assessed the fit of the exploratory model. Convergent validity and group differences were also evaluated. The EFA and CFA presented a one-dimensional structure for the P-Scale. Moderate correlations were found between the P-Scale and mental-health, subjective happiness and life-satisfaction. The levels of positivity presented a low positive correlation with age, educational level and financial income. Slightly significant effects were found for occupational status and marital status. Positivity appears to be more closely related to personal dispositions than to sociodemographic aspects. Our results suggest that the P-Scale is a reliable measure with which to evaluate the levels of positivity in Brazil.

  19. A Connection Model between the Positioning Mechanism and Ultrasonic Measurement System via a Web Browser to Assess Acoustic Target Strength

    Science.gov (United States)

    Ishii, Ken; Imaizumi, Tomohito; Abe, Koki; Takao, Yoshimi; Tamura, Shuko

    This paper details a network-controlled measurement system for use in fisheries engineering. The target strength (TS) of fish is important in order to convert acoustic integration values obtained during acoustic surveys into estimates of fish abundance. The target strength pattern is measured with the combination of the rotation system for the aspect of the sample and the echo data acquisition system using the underwater supersonic wave. The user interface of the network architecture is designed for collaborative use with researchers in other organizations. The flexible network architecture is based on the web direct-access model for the rotation mechanism. The user interface is available for monitoring and controlling via a web browser that is installed in any terminal PC (personal computer). Previously the combination of two applications was performed not by a web browser but by the exclusive interface program. So a connection model is proposed between two applications by indirect communication via the DCOM (Distributed Component Object Model) server and added in the web direct-access model. A prompt report system in the TS measurement system and a positioning and measurement system using an electric flatcar via a web browser are developed. By a secure network architecture, DCOM communications via both Intranet and LAN are successfully certificated.

  20. Potential predictive factors of positive prostate biopsy in the Chinese ...

    African Journals Online (AJOL)

    Yomi

    2012-01-16

    Jan 16, 2012 ... Therefore, it might be inappropriate that we apply these western models to the. Chinese population that has a lower incidence of PCa. Therefore, this retrospective study aimed to determine predictive factors for a positive prostate biopsy in Chinese men. Our ultimate goal is to develop a simple model for ...