Proton conducting sulphonated fluorinated poly(styrene) crosslinked electrolyte membranes

Energy Technology Data Exchange (ETDEWEB)

Soules, A.; Ameduri, B.; Boutevin, B.; David, G. [Institut Charles Gerhardt UMR CNRS 5253 Equipe, Ingenierie et Architectures Macromoleculaires,' ' Ecole Nationale Superieure de Chimie de Montpellier, 8 rue de l' Ecole Normale, 34296 Montpellier, Cedex 05 (France); Perrin, R. [CEA Le Ripault Departement des Materiaux, DMAT/SCMF/LSTP, BP16 - 37260 Monts (France); Gebel, G. [Structure et Proprietes des Architectures Moleculaires UMR 5819 (CEA-CNRS-UJF), INAC, SPrAM, CEA Grenoble, 17 Rue des Martyrs, 38054 Grenoble, Cedex 9 (France)

2011-10-15

Potential membranes for polymer electrolyte membrane fuel cell based on crosslinked sulphonated fluorinated polystyrenes (PS) were synthesised in two steps. First, azide-telechelic polystyrene was obtained by iodine transfer polymerisation of styrene in the presence of 1,6-diiodoperfluorohexane followed by azido chain-end functionalisation. Then azide-telechelic polystyrene was efficiently crosslinked with 1,10-diazido-1H,1H,2H,2H,9H,9H,10H,10H-perfluorodecane under UV irradiation. After 45 min only, almost completion of azide crosslinking could be achieved, resulting in crosslinked membranes with insoluble fractions higher than 95%. The sulphonation of the crosslinked membranes afforded ionic exchange capacities (IECs) ranging from 2.2 to 3.2 meq g{sup -1}. The hydration number was shown to be very high (from 30 to 75), depending on both the content of perfluorodecane and of sulphonic acid groups. The morphology of the membranes, assessed by small-angle X-ray scattering, was found to be a lamellar-type structure with two types of ionic domains. For the membrane that exhibited an IEC value of 2.2 meq.g{sup -1}, proton conductivity was in the same range as that of Nafion {sup registered} (120-135 mS.cm{sup -1}), whereas the membrane IEC value of 3.2 meq.g{sup -1} showed a proton conductivity higher than that of Nafion {sup registered} in liquid water from 25 to 80 C, though a high water uptake. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

SPS Abundance - Salmon Population Summary Database

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The data contained in the SPS database are primarily summary data, compiled at the population level and available through the SPS website...

Integration of SPS with utility system networks

Science.gov (United States)

Kaupang, B. M.

1980-01-01

The integration of Satellite Power System (SPS) power in electric utility power systems is discussed. Specifically, the nature of the power output variations from the spacecraft to the rectenna, the operational characteristics of the rectenna power, and the impacts on the electric utility system from utilizing SPS power to serve part of the system load are treated. It is concluded that if RF beam control is an acceptable method for power control, and that the site distribution of SPS rectennas do not cause a very high local penetration (40 to 50%), SPS may be integrated into electric utility system with a few negative impacts. Increased regulating duty on the conventional generation, and a potential impact on system reliability for SPS penetration in excess of about 25% appear to be two areas of concern.

Satellite Power System (SPS) Program Summary

Energy Technology Data Exchange (ETDEWEB)

1978-12-01

The joint DOE/NASA SPS program has as its objective to achieve by the end of 1980 an initial understanding of the technical feasibility, economic practicability, and the social and environmental acceptability of the SPS concepts so that recommendations concerning program continuation can be made. The four major study areas include (1) systems definition; (2) environmental assessment; (3) societal assessment; and (4) comparative assessment of alternative energy systems. All the projects on the SPS program are listed and summarized for FY 1978. (WHK)

Satellite Power System (SPS) financial/management scenarios

Science.gov (United States)

Vajk, J. P.

1978-01-01

The possible benefits of a Satellite Power System (SPS) program, both domestically and internationally, justify detailed and imaginative investigation of the issues involved in financing and managing such a large-scale program. In this study, ten possible methods of financing a SPS program are identified ranging from pure government agency to private corporations. The following were analyzed and evaluated: (1) capital requirements for SPS; (2) ownership and control; (3) management principles; (4) organizational forms for SPS; (5) criteria for evaluation; (6) detailed description and preliminary evaluation of alternatives; (7) phased approaches; and (8) comparative evaluation. Key issues and observations and recommendations for further study are also presented.

SPS Beam Steering for LHC Extraction

Energy Technology Data Exchange (ETDEWEB)

Gianfelice-Wendt, Eliana [Fermilab; Bartosik, Hannes [CERN; Cornelis, Karel [CERN; Norderhaug Drøsdal, Lene [CERN; Goddard, Brennan [CERN; Kain, Verena [CERN; Meddahi, Malika [CERN; Papaphilippou, Yannis [CERN; Wenninger, Jorg [CERN

2014-07-01

The CERN Super Proton Synchrotron accelerates beams for the Large Hadron Collider to 450 GeV. In addition it produces beams for fixed target facilities which adds complexity to the SPS operation. During the run 2012-2013 drifts of the extracted beam trajectories have been observed and lengthy optimizations in the transfer lines were performed to reduce particle losses in the LHC. The observed trajectory drifts are consistent with the measured SPS orbit drifts at extraction. While extensive studies are going on to understand, and possibly suppress, the source of such SPS orbit drifts the feasibility of an automatic beam steering towards a “golden” orbit at the extraction septa, by means of the interlocked correctors, is also being investigated. The challenges and constraints related to the implementation of such a correction in the SPS are described. Simulation results are presented and a possible operational steering strategy is proposed.

Adsorption and wettability study of methyl ester sulphonate on precipitated asphaltene

International Nuclear Information System (INIS)

Okafor, H E; Gholami, R; Sukirman, Y

2016-01-01

Asphaltene precipitation from crude oil and its subsequent aggregation forms solid, which preferentially deposit on rock surfaces causing formation damage and wettability changes leading to loss of crude oil production. To resolve this problem, asphaltene inhibitor has been injected into the formation to prevent the precipitation of asphaltene. Asphaltene inhibitors that are usually employed are generally toxic and non-biodegradable. This paper presents a new environmentally friendly asphaltene inhibitor (methyl ester sulphonate), an anionic surfactant, which has excellent sorption on formation rock surfaces. Result from adsorption study validated by Langmuir and Freundlich models indicate a favourable adsorption. At low volumes injected, methyl ester sulphonate is capable of reverting oil-wet sandstone surface to water-wet surface. Biodegradability test profile shows that for concentrations of 100-5000ppm it is biodegradable by 65-80%. (paper)

The experimental programme of the SPS

CERN Document Server

Kluyver, J C

1977-01-01

Early success with the CERN 28 GeV proton synchrotron (PS) prompted three questions about the future. Which areas of high energy particle physics would offer the best chance of progress, and with which accelerators? Which detectors would be needed? What experiments would be most likely to succeed? About 1963 it was suggested that the PS be extended with intersecting storage rings (ISR), and a 300 GeV SPS be built. By 1971 the ISR was ready for experiments, and the SPS proposal approved. At the present time the SPS programme comprises 28 experiments in the West Hall. (0 refs).

SPS batch spacing optimisation

CERN Document Server

Velotti, F M; Carlier, E; Goddard, B; Kain, V; Kotzian, G

2017-01-01

Until 2015, the LHC filling schemes used the batch spac-ing as specified in the LHC design report. The maximumnumber of bunches injectable in the LHC directly dependson the batch spacing at injection in the SPS and hence onthe MKP rise time.As part of the LHC Injectors Upgrade project for LHCheavy ions, a reduction of the batch spacing is needed. In thisdirection, studies to approach the MKP design rise time of150ns(2-98%) have been carried out. These measurementsgave clear indications that such optimisation, and beyond,could be done also for higher injection momentum beams,where the additional slower MKP (MKP-L) is needed.After the successful results from 2015 SPS batch spacingoptimisation for the Pb-Pb run [1], the same concept wasthought to be used also for proton beams. In fact, thanksto the SPS transverse feed back, it was already observedthat lower batch spacing than the design one (225ns) couldbe achieved. For the 2016 p-Pb run, a batch spacing of200nsfor the proton beam with100nsbunch spacing wasreque...

The potency of the SPS Agreement’s ‘excessivity test’

NARCIS (Netherlands)

Schebesta, H.; Sinopoli, D.A.

2018-01-01

The article investigates the current and potential relevance of Article 5.6 SPS in deciding SPS disputes, and its impact on trade liberalization and WTO Members’ power to take sanitary and phytosanitary measures.
Article 5.6 of the SPS Agreement states that SPS measures may not be more trade

Plan of SPS to LHC transfer tunnels

CERN Multimedia

Laurent Guiraud

2001-01-01

This diagram shows the LHC and the SPS pre-accelerator (in blue) and the transfer lines that will connect them (in red). Spanning the France-Swiss border (shown by green crosses), the 27-km LHC tunnel will receive a beam that has been pre-accelerated to 450 GeV in the smaller SPS storage ring. The transfer lines will remove each beam from the SPS and inject them into the LHC where they will be accelerated to the full energy of 7 TeV.

Longitudinal Space Charge in the SPS

CERN Document Server

Lasheen, Alexandre

2016-01-01

Longitudinal instabilities due to the SPS beam coupling impedance are a major issue for future projects and it is essential to have an accurate SPS impedance model to study them. The longitudinal space charge effect can be modelled by a pure reactive impedance and should also be included in simulations as it may have an impact at low energy. In this Note, the effect of the longitudinal space charge in the SPS is evaluated by taking into account the variation of the transverse beam size and vacuum chamber geometry along the ring. Scaling laws are used to investigate what are the most important parameters for the evaluation of the longitudinal space charge impedance.

Beam measurements of the SPS longitudinal impedance

CERN Document Server

Lasheen, A

2017-01-01

Longitudinal instabilities are one of the main limitationsin the CERN SPS to reach the beam parameters requiredfor the High Luminosity LHC project. In preparation tothe SPS upgrade, possible remedies are studied by perform-ing macroparticle simulations using the machine impedancemodel obtained from electromagnetic simulations and mea-surements. To benchmark the impedance model, the resultsof simulations are compared with various beam measure-ments. In this study, the reactive part of the impedance wasprobed by measuring the quadrupole frequency shift withintensity, obtained from bunch length oscillations at mis-matched injection into the SPS. This method was appliedover many last years to follow up the evolution of the SPSimpedance, injecting bunches with the same bunch length.A novel approach, giving significantly more information,consists in varying the injected bunch length. The compari-son of these measurements with macroparticle simulationsallowed to test the existing model and identify some missingSPS i...

Coupling Impedance of the CERN SPS beam position monitors

CERN Document Server

Salvant, B; Boccard, C; Caspers, Friedhelm; Grudiev, A; Jones, R; Métral, E; Rumolo, G; Zannini, C; Spataro, B; Alesini, D; Migliorati, M; Roncarolo, F; Calaga, R

2010-01-01

A detailed knowledge of the beam coupling impedance of the CERN Super Proton Synchrotron (SPS) is required in order to operate this machine with a higher intensity for the foreseen Large Hadron Collider (LHC) luminosity upgrade. A large number of Beam Position Monitors (BPMs) is currently installed in the SPS, and this is why their contribution to the SPS impedance has to be assessed. This paper focuses on electromagnetic (EM) simulations and bench measurements of the longitudinal and transverse impedance generated by the horizontal and vertical BPMs installed in the SPS machine.

Feasibility study of various sulphonation methods for transforming carbon nanotubes into catalysts for the esterification of palm fatty acid distillate

International Nuclear Information System (INIS)

Shuit, Siew Hoong; Tan, Soon Huat

2014-01-01

Highlights: • First report on the production of biodiesel from low-value industrial by-product using sulphonated MWCNTs as catalyst. • Various sulphonation methods were used to transform MWCNTs into catalysts. • SO 3 H were successfully grafted on the surface of MWCNTs, which resulted in a high biodiesel yield and reuse capacity. • The maximum FAME yield by sulphonated MWCNTs was higher than for other popular solid acid catalysts. - Abstract: Sulphonated multi-walled carbon nanotubes were synthesised and utilised as catalysts to transform palm fatty acid distillate, the low-value by-product of palm oil refineries, into the more valuable product of biodiesel. The most common method to prepare carbon-based solid acid catalysts is thermal treatment with concentrated sulphuric acid, which is a time-consuming and energy-intensive process. Therefore, the feasibility of other sulphonation methods, such as the in situ polymerisation of acetic anhydride and sulphuric acid, the thermal decomposition of ammonium sulphate and the in situ polymerisation of poly(sodium4-styrenesulphonate), were examined in this study. The esterification reaction was performed at 170 °C for 3 h at a methanol to palm fatty acid distillate ratio of 20 and catalyst loading of 2 wt% in a pressurised reactor. The fatty acid methyl esters yields achieved by the sulphonated multi-walled carbon nanotubes prepared via thermal treatment with concentrated sulphuric acid, the in situ polymerisation of acetic anhydride and sulphuric acid, the thermal decomposition of ammonium sulphate and the in situ polymerisation of poly(sodium4-styrenesulphonate) were 78.1%, 85.8%, 88.0% and 93.4%, respectively. All catalysts could maintain a high catalytic activity even during the fifth cycle. Among the sulphonation methods, the in situ polymerisation of poly(sodium4-styrenesulphonate) produced the catalyst with the highest acid group density. In addition, the resonance structures of the benzenesulphonic acid

SPS extraction systems

CERN Multimedia

CERN PhotoLab

1973-01-01

One of the 3-m long electrostatics septa. The septum itself consists of 0.15 mm thick molybdenum wires with a 1.5 mm pitch. Each of the two SPS extraction systems will contain four of these electrostatic septa.

Solid Silica-based Sulphonic Acid as an Efficient Green Catalyst for ...

African Journals Online (AJOL)

NJD

Solid Silica-based Sulphonic Acid as an Efficient Green. Catalyst for the Selective Oxidation of Sulphides to. Sulphoxides using NaCIO in Aqueous Media. Ali Amoozadeh* and Firouzeh Nemati. Department of Chemistry, Faculty of Science, Semnan University, Semnan, Iran. Received 21 October 2008, revised 6 December ...

New control architecture for the SPS accelerator at CERN

International Nuclear Information System (INIS)

Kissler, K.H.; Rausch, R.

1992-01-01

The Control System for the 450 Gev proton accelerator SPS at CERN was conceived and implemented some 18 years ago. The 16 Bit minicomputers with their proprietary operating system and interconnection with a dedicated network do not permit the use of modern workstations, international communication standards and industrial software packages. The upgrading of the system has therefore become necessary. After a short review of the history and the current state of the SPS control system, the paper describes how CERN's new control architecture, which will be common to all accelerators, will be realized at the SPS. The migration path ensuring a smooth transition to the final system is outlined. Once the SPS upgrade is complete and following some enhancements to the LEP control system, the operator in the SPS/LEP control center will be working in a single uniform control environment. (author)

Stiff person syndrome (SPS: Literature review and case report

Directory of Open Access Journals (Sweden)

Erna Pretorius

2013-11-01

Full Text Available Stiff person syndrome (SPS is a rare, debilitating condition which presents with progressive and inconsistent neurological features. The main symptoms are stiffness and intermittent, painful muscle spasms, triggered and exacerbated by stressful and emotional stimuli. The fluctuating clinical nature of SPS, and otherwise normal neurological examination, often lead to a misdiagnosis of conversion disorder. Psychiatric symptoms frequently accompany this disorder and patients are often first seen by psychiatrists. SPS is autoimmune-based: antibodies are directed against glutamate decarboxylase, resulting in dysregulation of gamma-aminobutyric acid (GABA in the brain which is considered the cause of the neuropsychiatric symptomatology. SPS should be considered in the differential diagnosis of conversion disorder. Effective management requires early detection, a collaborative approach with GABA-ergic medication and intravenous immunoglobulins, and management of concomitant psychiatric disorders. We describe a patient with SPS. Only one other case has been reported in South Africa.

Mission critical database for SPS accelerator measurements

CERN Document Server

Billen, R; Laugier, I; Reguero, I; Segura, N

1995-01-01

In order to maintain efficient control over the hadron and lepton beams in CERN¹s SPS accelerator, measurements are of vital importance. Beam parameters such as intensities, positions and losses need to be rapidly available in the SPS control room to allow the operators to monitor, judge and act on beam physics conditions. For the 1994 SPS startup, a completely new and redesigned measurement system based on client and server C-programs running on UNIX-workstations was introduced. The kernel of this new measurement system is an on-line ORACLE database.The NIAM method was used for the database design as well as a technique to tag synchronized data with timeslots instead of timestamps. A great attention was paid to proper storage allocation for tables and indices since this has a major impact on the efficiency of the database, due to its time-critical nature. Many new features of Oracle7 were exploited to reduce the surrounding software.During the 1994 SPS physics run, this new measurement system was commission...

Searching for Quark Matter at the CERN SPS

CERN Document Server

Lourenço, C

2002-01-01

This article gives a brief overview of some recent advances in our understanding of the physics of dense strongly interacting matter, from measurements done at the CERN SPS. The presently available results are very interesting, and are likely to reflect the production of a new state of matter in central Pb-Pb collisions, at the highest SPS energies. However, important questions require further work. Particular emphasis is given to developments made since the Quark Matter 1999 conference, and to issues that justify the continuation of the SPS heavy ion physics program beyond year 2000.

Development of a short form Social Interaction Anxiety (SIAS) and Social Phobia Scale (SPS) using nonparametric item response theory: the SIAS-6 and the SPS-6.

Science.gov (United States)

Peters, Lorna; Sunderland, Matthew; Andrews, Gavin; Rapee, Ronald M; Mattick, Richard P

2012-03-01

Shortened forms of the Social Interaction Anxiety Scale (SIAS) and the Social Phobia Scale (SPS) were developed using nonparametric item response theory methods. Using data from socially phobic participants enrolled in 5 treatment trials (N = 456), 2 six-item scales (the SIAS-6 and the SPS-6) were developed. The validity of the scores on the SIAS-6 and the SPS-6 was then tested using traditional methods for their convergent validity in an independent clinical sample and a student sample, as well as for their sensitivity to change and diagnostic sensitivity in the clinical sample. The scores on the SIAS-6 and the SPS-6 correlated as well as the scores on the original SIAS and SPS, with scores on measures of related constructs, discriminated well between those with and without a diagnosis of social phobia, providing cutoffs for diagnosis and were as sensitive to measuring change associated with treatment as were the SIAS and SPS. Together, the SIAS-6 and the SPS-6 appear to be an efficient method of measuring symptoms of social phobia and provide a brief screening tool.

The CERN 400 GeV proton synchrotron (CERN SPS)

International Nuclear Information System (INIS)

Adams, J.B.

1977-01-01

The main characteristics of the CERN 400 GeV proton synchrotron (SPS) has described. Beam intensity averages about 5x10 12 protons per pulse. The CERN 28 GeV proton synchrotron serves as an injector for the SPS. There are 108 magnet periods in the machine with a phase shift per period of π/2. The magnet system consists of 800 dipoles with 1.8 T magnetic field and 216 quadrupoles with a field gradient of 20.7 T (per meter). The frequency chosen for the RF system of the SPS is 200 MHz. Two beam extraction systems are installed in the SPS, one to feed protons to the West Experimental Area, and the other to feed protons to the North Experimental Area. The planned development of the machine in the next few years has described. The cost per GeV of the SPS works out 3 to 4 times less than that of the CPS

SPS commemorative stamp

CERN Multimedia

1977-01-01

The turn on of the SPS was commemorated in France by the issue of a CERN stamp. The date of issue, 22 Octber 1976, coincided with the first tests of the beam line taking particles to experiments in the West Hall. (CERN Courier 1976 p. 382)

SPS rectifier stations

CERN Multimedia

CERN PhotoLab

1974-01-01

The first of the twelves SPS rectifier stations for the bending magnets arrived at CERN at the end of the year. The photograph shows a station with the rectifiers on the left and in the other three cubicles the chokes, capacitors and resistor of the passive filter.

Integration of SPS with utility system networks

Energy Technology Data Exchange (ETDEWEB)

Kaupang, B.M.

1980-06-01

This paper will discuss the integration of SPS power in electric utility power systems. Specifically treated will be the nature of the power output variations from the spacecraft to the rectenna, the operational characteristics of the rectenna power and the impacts on the electric utility system from utilizing SPS power to serve part of the system load.

A 25th Anniversary Rejuvenation for the SPS

CERN Multimedia

2001-01-01

The SPS has just turned 25, and to mark the occasion it has been treated to a facelift like none before. After serving as injector for LEP, the SPS is being prepared to pre-accelerate proton beams for the LHC.

Selective separation of uranium and thorium from lanthanides on sulphonic ion exchangers

Energy Technology Data Exchange (ETDEWEB)

Hubicki, Z; Hubicka, H; Jusiak, S [Uniwersytet Marii Curie-Sklodowskiej, Lublin (Poland)

1977-01-01

Separation of uranium and thorium from rare earth elements was studied on sulphonic ion exchangers of various types. Ammonium acetate, ammonium salicylate, aliphatic amine acetates, metaphosphoric acid and others were used as eluants. The most effective separation was attained by using metaphosphoric acid as eluant.

The promoter activities of sucrose phosphate synthase genes in rice, OsSPS1 and OsSPS11, are controlled by light and circadian clock, but not by sucrose

Directory of Open Access Journals (Sweden)

Madoka eYonekura

2013-03-01

Full Text Available Although sucrose plays a role in sugar sensing and its signaling pathway, little is known about the regulatory mechanisms of the expressions of plant sucrose-related genes. Our previous study on the expression of the sucrose phosphate synthase gene family in rice (OsSPSs suggested the involvement of sucrose sensing and/or circadian rhythm in the transcriptional regulation of OsSPS. To examine whether the promoters of OsSPSs can be controlled by sugars and circadian clock, we produced transgenic rice plants harboring a promoter–luciferase construct for OsSPS1 or OsSPS11 and analyzed the changes in the promoter activities by monitoring bioluminescence from intact transgenic plants in real time. Transgenic plants fed sucrose, glucose, or mannitol under continuous light conditions showed no changes in bioluminescence intensity; meanwhile, the addition of sucrose increased the concentration of sucrose in the plants, and the mRNA levels of OsSPS remained constant. These results suggest that these OsSPS promoters may not be regulated by sucrose levels in the tissues. Next, we investigated the changes in the promoter activities under 12-h light/12-h dark cycles and continuous light conditions. Under the light–dark cycle, both OsSPS1 and OsSPS11 promoter activities were low in the dark and increased rapidly after the beginning of the light period. When the transgenic rice plants were moved to the continuous light condition, both POsSPS1::LUC and POsSPS11::LUC reporter plants exhibited circadian bioluminescence rhythms; bioluminescence peaked during the subjective day with a 27-h period: in the early morning as for OsSPS1 promoter and midday for OsSPS11 promoter. These results indicate that these OsSPS promoters are controlled by both light illumination and circadian clock and that the regulatory mechanism of promoter activity differs between the 2 OsSPS genes.

Emittance growth in coast in the SPS

CERN Document Server

Alekou, A; Bartosik, H; Calaga, R

2017-01-01

The CERN SPS will be used as a test-bed for the LHCprototype crab-cavities, which will be installed and testedin the SPS in 2018. As the time available for experimen-tal beam dynamics studies with the crab cavities installedin the machine will be limited, a very good preparation isrequired in advance. One of the main concerns is the in-duced emittance growth, driven by phase jitter in the crabcavities. In this respect, several machine development (MD)studies were performed during the past years to quantifyand characterize the emittance evolution of proton beamsin coast in the SPS. In these proceedings, the experimentalobservations from past years are summarized and the MDstudies from 2016 are presented. Finally, a proposal for anexperimental program for 2017 is discussed.

Characterization of the SPS 800MHz travelling wave cavities.

CERN Document Server

Bazyl, Dmitry

2015-01-01

It is well known that HOMs in RF cavities are a potentially dangerous source of beam impedance. Therefore, HOMs (both longitudinal and transverse) can drive the beam unstable . The 800MHz cavities of the SPS were studied in the past. However, very little documentation was left behind. Currently, the performance of the SPS is limited by a longitudinal beam instability. In order to study this instability, an accurate impedance model of the whole SPS is needed.

Potential interest in Europe in SPS development

Energy Technology Data Exchange (ETDEWEB)

Reinhartz, K K

1980-06-01

The Solar Satellite Power System is a concept whereby large solar-energy converters are placed in outer space and the electrical energy produced is transmitted back to earth as microwave radiation. A number of studies, performed mainly in the United States, are aimed at assessing the technical, economic, social and health aspects of this concept. This paper does not address the feasibility of the SPS as such, but discusses the potential contribution that an SPS could make to the European energy scenario, the economic impact of the SPS as an indigenous European energy source, and the potential importance of the SPS as a technology driver. A European network of forty solar power satellites could supply electrical energy equal to Europe's present electrical energy production and significantly reduce Europe's dependence on energy imports. Additionally the development of a power satellite technology, if started by the United States, is expected to lead to such an advancement in technology in key areas, e.g., space industrialisation, photovoltaic energy conversion and wireless transmission of energy, that Europe would rapidly lose technical competence in many important fields if it were not to participate.

Development of the sulphonated poly(2,6-Dimethyl-1,4-Phenylene Oxide) membranes for proton exchange membranes fuel cells

International Nuclear Information System (INIS)

Ebrasu, Daniela; Petreanu, Irina; Iordache, Ioan; Stefanescu, Ioan; Gaspar, Costinela-Laura; Militaru, Daniela

2008-01-01

Full text: Fuel cells have the potential to become an important energy conversion technology. Research efforts directed toward the widespread commercialization of fuel cells have accelerated the developing of new types of Proton Exchange Membranes (also termed 'polymer electrolyte membranes') (PEM). Common issues critical to all high performance proton exchange membranes include: - high protonic conductivity; - low electronic conductivity; - low permeability to fuel and oxidant; - low water transport through diffusion and electro-osmosis; - oxidative and hydrolytic stability; - good mechanical properties in both the dry and hydrated states; - cost; and capability for fabrication into Membrane Electrode Assemblies (MEAs). In this sense we choose to use poly(2,6-Dimethyl-1,4-Phenylene Oxide) (PPO) as basis for development of new PEM membranes. The membranes were prepared by lamination from solution (Doctor Balde) method in controlled atmosphere (preliminary vacuum 0.003 Torr and/or nitrogen). FTIR spectra of the sulphonated polymers prove the sulphonic groups presence according the literature. Ionic exchange capacity (IEC) have the values 1.15-3.6 meq/g. TGA-DSC analysis put in evidence the thermal degradation of the sulphonated polymers at about 120 deg. C. These properties of the sulphonated PPO are in accordance of the requirements for PEM membranes and indicate that this polymer is suitable for PEM Fuel cells. (authors)

Visiting the SPS installation

CERN Multimedia

1975-01-01

...., Guenther Loehr, Hans Horisberger walk along the SPS tunnel: here, on the right, an absorber block of 22 tons for beam dumping in the external beam lines. The chariot serves for the installation of the block.

Morphology and performance of polyvinylidene fluoride/perfluoro sulphonic acid hollow fiber ultrafiltration blend membranes

International Nuclear Information System (INIS)

Yuan, Guo-Lin; Xu, Zhen-Liang; Wei, Yong-Ming; Yu, Li-Yun

2009-01-01

Polyvinylidene fluoride-perfluoro sulphonic acid hollow fibre ultrafiltration blend membranes were prepared by wet-spinning method. Polyvinylpyrrolidone and ethanol aqueous solutions were employed as additive and coagulants, respectively. The effect of Polyvinylpyrrolidone concentration in the dopes and ethanol concentration in the coagulants on morphology and performance of Polyvinylidene fluoride -perfluoro sulphonic acid hollow fibre ultrafiltration blend membranes were investigated. Blend membranes were characterized in terms of precipitation kinetics, morphology, thermal property and separation performance. The results showed that the increments of Polyvinylpyrrolidone concentration in the dopes and ethanol concentration in coagulants both resulted in higher pure water permeation flux and worse rejection (R) of bovine serum albumin (with the increment of Polyvinylpyrrolidone concentration from 0 to 5 wt% in the dopes, pure water permeation increased from 41.7 L.m -2 .h -1 to 134 L.m -2 .h -1 and R decreased from 99.8% to 84.4% as well as with the increase in ethanol concentration in coagulants from 0 to 40 wt%, pure water permeation increased from 33.5 L.m -2 .h- 1 to 123 L.m -2 .h -1 and R decreased from 97.7% to 88.7%). However, the proportion of sponge-like structure in the cross-section of membranes decreased with the increasing Polyvinylpyrrolidone concentration in the dopes and the proportion increased with the increased ethanol concentration in the coagulations. In addition, the location of the sponge-like structure in the cross-section of membranes was significantly influenced by ethanol concentrations in the coagulants and differential scanning calorimeter results revealed that the crystallinity (X c ) of the blend membrane was in accordance with the proportion of sponge-like structure. These behaviours were attributed to the different roles of Polyvinylpyrrolidone in the dopes and ethanol in the coagulants, respectively. Polyvinylidene fluoride

Life after discovery: a look at the SPS of 2012

CERN Multimedia

Katarina Anthony

2012-01-01

Though no longer the newest kid on the block, the SPS remains as essential to CERN’s research programme as it was when it discovered the W and Z bosons back in 1983. The CERN Bulletin takes a look at how the SPS has kept up with younger CERN accelerators...   Teams changing an SPS magnet during a technical stop. Image courtesy of Franck Bais. It’s the 1970s and the Super Proton Synchrotron (SPS) is at the top of the charts. It’s accelerating protons at 400 GeV - an unprecedented energy for CERN - and its discoveries will make it the first (and, so far, the only) CERN accelerator to generate a Nobel Prize. Fast-forward to 2012 and the SPS is running at 450 GeV – well beyond its original design parameters – and is an essential part of the LHC accelerator complex. Not bad for a machine heading into its 40s. While much of the SPS dates back to the original set-up, it has been in constant evolution over the years. Except for a long shutdo...

Analysis of the SPS Long Term Orbit Drifts

Energy Technology Data Exchange (ETDEWEB)

Velotti, Francesco [CERN; Bracco, Chiara [CERN; Cornelis, Karel [CERN; Drøsdal, Lene [CERN; Fraser, Matthew [CERN; Gianfelice-Wendt, Eliana [Fermilab; Goddard, Brennan [CERN; Kain, Verena [CERN; Meddahi, Malika [CERN

2016-06-01

The Super Proton Synchrotron (SPS) is the last accelerator in the Large Hadron Collider (LHC) injector chain, and has to deliver the two high-intensity 450 GeV proton beams to the LHC. The transport from SPS to LHC is done through the two Transfer Lines (TL), TI2 and TI8, for Beam 1 (B1) and Beam 2 (B2) respectively. During the first LHC operation period Run 1, a long term drift of the SPS orbit was observed, causing changes in the LHC injection due to the resulting changes in the TL trajectories. This translated into longer LHC turnaround because of the necessity to periodically correct the TL trajectories in order to preserve the beam quality at injection into the LHC. Different sources for the SPS orbit drifts have been investigated: each of them can account only partially for the total orbit drift observed. In this paper, the possible sources of such drift are described, together with the simulated and measured effect they cause. Possible solutions and countermeasures are also discussed.

Final report of the SPS space transportation workshop

Energy Technology Data Exchange (ETDEWEB)

1980-10-01

After a brief description of space power system concepts and the current status of the SPS program, issues relevant to earth-surface-to-low-earth-orbit (ESLEO) and orbit-to-orbit transport are discussed. For ESLEO, vehicle concepts include shuttle transportation systems, heavy lift launch vehicles, and single-stage-to-orbit vehicles. Orbit transfer vehicle missions include transport of cargo and the SPS module from low earth orbit to geosynchronous earth orbit as well as personnel transport. Vehicles discussed for such missions include chemical rocket orbital transfer vehicles, and electric orbital transfer vehicles. Further discussions include SPS station-keeping and attitude control, intra-orbit transport, and advanced propulsion and vehicle concepts. (LEW)

Esterification of free fatty acids in biodiesel production with sulphonated pyrolysed carbohydrate catalysts

DEFF Research Database (Denmark)

Madsen, Anders Theilgaard; Riisager, Anders; Fehrmann, Rasmus

The pre-treatment of free fatty acids in oils and fats in biodiesel production is of pivotal importance, and esterification in acidic medium must be done prior to basic transesterification of glycerides. The free fatty acids may be converted over an acidic catalyst of sulphonated pyrolysed...

Carbon-13 spin lattice relaxation and photoelectron spectroscopy of some aromatic sulphides and sulphones

International Nuclear Information System (INIS)

Mellink, W.A.

1978-01-01

Carbon-13 NMR spectroscopy and photoelectron spectroscopy have been used to study the electronic structure of symmetric dithienothiophenes and corresponding sulphones. The physical data obtained from both spectroscopic techniques have been interpreted with the aid of quantum mechanical calculations. (Auth.)

SPS injection kicker magnet

CERN Document Server

1975-01-01

One of the first-generation SPS injection kicker magnets. Lifting the tank-lid reveals the inner structure. For a more detailed description see 7502072X. See also 7502074X and Annual Report 1975, p.162. To the left: Roland Tröhler; to the right: Giacomo Busetta.

The Inhibitive Action Of Sodium Soya Sulphonate Towards The Corrosion Of Aluminium In Hydrochloric Acid

OpenAIRE

Mourad, M. Y.; Mead, A. I.; Seliman, S. A.

1993-01-01

The dissolution of aluminium in 2M hydrochloric acid in the presence of sodium soya sulphonate (SSS) as corrosion inhibitor has been studied using hydrogen evolution and thermometric methods. The two methods gave consistent results. The results obtained indicate that the inhibitive effect of the sulphonated mixture relates to chemisorption mechanism on the metal surface via the n electrons in the double bonds. تمت دراسة ذوبان الألمونيوم في محلول 2 مولارى من حمض الهيدروكلوريك في وجود سلفونا...

Impedance Characterisation of the SPS Wire Scanner

CERN Document Server

AUTHOR|(CDS)2091911; Prof. Sillanpää, Mika

As a beam diagnostic tool, the SPS wire scanner interacts with the proton bunches traversing the vacuum pipes of the Super Proton Synchrotron particle accelerator. Following the interaction, the bunches decelerate or experience momentum kicks off-axis and couple energy to the cavity walls, resonances and to the diagnostic tool, the scanning wire. The beam coupling impedance and, in particular, the beam induced heating of the wire motivate the characterisation and redesign of the SPS wire scanner. In this thesis, we characterise RF-wise the low frequency modes of the SPS wire scanner. These have the highest contribution to the impedance. We measure the cavity modes in terms of resonance frequency and quality factor by traditional measurement techniques and data analysis. We carry out a 4-port measurement to evaluate the beam coupling to the scanning wire, that yields the spectral heating power. If combined with the simulations, one is able to extract the beam coupling impedance and deduce the spectral dissipa...

Modifications to the SPS LSS6 Septa for LHC and the SPS Septa Diluters

CERN Document Server

Borburgh, Y; Goddard, B; Kadi, Y

2006-01-01

The Large Hadron Collider required the modification of the existing extraction channel in the long straight section (LSS) 6 of the CERN Super Proton Synchrotron (SPS), including the suppression of the electrostatic wire septa. The newly set up fast extraction will be used to transfer protons at 450 GeV/c as well as ions via the 2.9 km long transfer line TI 2 to Ring 1 of the LHC. The girder of the existing SPS DC septa was modified to accommodate a new septum protection element. Changes were also applied to the septum diluter in the fast extraction channel in LSS4, leading to the other LHC ring and the CNGS facility. The requirements and the layout of the new LSS6 extraction channel will be described including a discussion of the design and performance of the installed septum diluters.

SPS slow extraction septa

CERN Multimedia

CERN PhotoLab

1979-01-01

SPS long straight section (LSS) with a series of 5 septum tanks for slow extraction (view in the direction of the proton beam). There are 2 of these: in LSS2, towards the N-Area; in LSS6 towards the W-Area. See also Annual Report 1975, p.175.

Stacks of SPS Dipole Magnets

CERN Multimedia

1974-01-01

Stacks of SPS Dipole Magnets ready for installation in the tunnel. The SPS uses a separated function lattice with dipoles for bending and quadrupoles for focusing. The 6.2 m long normal conducting dipoles are of H-type with coils that are bent-up at the ends. There are two types, B1 (total of 360) and B2 (384). Both are for a maximum field of 1.8 Tesla and have the same outer dimensions (450x800 mm2 vxh) but with different gaps (B1: 39x129 mm2, B2: 52x92 mm2) tailored to the beam size. The yoke, made of 1.5 mm thick laminations, consists of an upper and a lower half joined together in the median plane once the coils have been inserted.

Biodegradation test of SPS-LS blends as polymer electrolyte membrane fuel cells

International Nuclear Information System (INIS)

Putri, Zufira; Arcana, I Made

2014-01-01

Sulfonated polystyrene (SPS) can be applied as a proton exchange membrane fuel cell due to its fairly good chemical stability. In order to be applied as polymer electrolyte membrane fuel cells (PEMFCs), membrane polymer should have a good ionic conductivity, high proton conductivity, and high mechanical strength. Lignosulfonate (LS) is a complex biopolymer which has crosslinks and sulfonate groups. SPS-LS blends with addition of SiO 2 are used to increase the proton conductivity and to improve the mechanical properties and thermal stability. However, the biodegradation test of SPS-LS blends is required to determine whether the application of these membranes to be applied as an environmentally friendly membrane. In this study, had been done the synthesis of SPS, biodegradability test of SPS-LS blends with variations of LS and SiO 2 compositions. The biodegradation test was carried out in solid medium of Luria Bertani (LB) with an activated sludge used as a source of microorganism at incubation temperature of 37°C. Based on the results obtained indicated that SPS-LS-SiO 2 blends are more decomposed by microorganism than SPS-LS blends. This result is supported by analysis of weight reduction percentage, functional groups with Fourier Transform Infrared (FTIR) Spectroscopy, and morphological surface with Scanning Electron Microscopy (SEM)

A users view of the SPS and LEP control systems

International Nuclear Information System (INIS)

Bailey, R.

1992-01-01

Every accelerator has a control system; at present the SPS has two, both of which are needed to run the machine. Consequently a user of the SPS/LEP complex has to be concurrently familiar with three control systems. While this situation brings problems it allows, even forces, comparison between the different systems, which in turn enriches the user viewpoint. This paper assesses the SPS and LEP control systems from the point of view of the user, who may be an equipment specialist, operator, accelerator physicist or combinations thereof. (author)

Upgrade of the CERN SPS Extraction Protection Elements TPS

CERN Document Server

Borburgh, Jan; Barnes, Michael; Baud, Cedric; Fraser, Matthew; Kain, Verena; Maciariello, Fausto; Steele, Genevieve; Velotti, Francesco

2017-01-01

In 2006 the protection devices upstream of the septa in both extraction channels of the CERN SPS to the LHC were installed. Since then, new beam parameters have been proposed for the SPS beam towards the LHC in the framework of the LIU project. The mechanical parameters and assumptions on which these protection devices presently have been based, need validation before the new upgraded versions can be designed and constructed. The paper describes the design assumptions for the present protection device and the testing program for the TPSG4 at HiRadMat to validate them. Finally the requirements and the options to upgrade both extraction protection elements in the SPS are described.

The SPS was the second cross-border accelerator

CERN Multimedia

2004-01-01

In the Golden Jubilee article in the issue 25/2004 (14 June) we should have written that the SPS was the first big cross-border accelerator. In fact, the SPS was not the first cross-border accelerator: that title goes to the PS Booster which became operational in 1972. The PS Booster passes beams to the PS and to the ISOLDE facility. We are sorry for the mistake and thank our vigilant readers.

Physics at the AD/PS/SPS (1/4)

CERN Multimedia

CERN. Geneva

2012-01-01

Lecture 1: The CERN injector complex and beams for non-LHC physics. The various machines and beam lines in the CERN injector complex are presented, from the linacs to the SPS. Special emphasis is given to the beam lines at the PS and SPS machines: AD, North and East Areas, nTOF and CNGS and HiRadMad as well as the ion beams. A short outlook is given to possible future upgrades and projects.

Tune Resonance Phenomena in the SPS and related Machine Protection

CERN Document Server

Baer, Tobias; Elsen, E

2010-01-01

The Super Proton Synchrotron (SPS) at CERN, with a peak energy of 450 GeV, is at the top of the LHC preaccelerator complex. SPS is at present the accelerator with the largest stored beam energy worldwide of up to 2.5 MJ. In 2008, a fast equipment failure led to an uncontrolled loss of a high intensity beam at an integer tune resonance, which resulted in major damage of a main dipole. Experimental studies and simulations provide clear understanding of the beam dynamics at different SPS tune resonances, that can lead to a complete beam loss in as little as 3 turns. Dedicated experiments of fast failures of the main power converters reveal that the current interlock systems are much too slow for an adequate machine protection. A new position interlock system, which is currently in the commissioning phase, will counteract the vulnerability of the SPS.

The extant shore platform stromatolite (SPS facies association: a glimpse into the Archean?

Directory of Open Access Journals (Sweden)

A. Smith

2018-04-01

Full Text Available Shore platform stromatolites (SPS were first noted at Cape Morgan on the south-east African seaboard. Since then they have been found growing discontinuously in rocky peritidal zones along the entire southern African seaboard. They have also been found on the southwest Australian coast, at Giant's Causeway in Northern Ireland, and more recently at Harris on the Scottish Hebridean Atlantic coast. In this paper SPS occurrence and SPS potential as analogues for Precambrian fossil stromatolites, as well as potential stromatolite occurrences in shore platform regions on Mars, are assessed. Sub-horizontal surfaces promote stromatolite development, while tufa develops on cliffs and steep rocky surfaces. Tufa and stromatolites are end members of a spectrum dictated by coastal topography. Extant SPS occur on well indurated shore platforms in high wave energy settings, often around or near headlands. They can be associated with boulder beaches, boulder ridges, storm swash terraces, coastal dunes, and peat bogs. In contrast to other extant stromatolites, SPS are produced primarily by mineral precipitation, although minor trapping and binding stromatolites do occur. From a geological perspective, SPS develop in mildly transgressive siliciclastic settings in various climatic and tidal regimes. We suggest that SPS could be preserved in the geological record as micritic lenses on palaeo-shore platform surfaces. SPS share many features with Precambrian stromatolites and are a valid modern analogue despite the widely different atmospheric and oceanic conditions of the Archean. We suggest that terraces associated with former oceanic or lacustrine flooding surfaces on Mars are potential targets in the search for palaeo-SPS on Mars.

Silver nanoparticles prepared by using poly(2-acrylamido-2-methylpropane sulphonic acid) as a surfactant

NARCIS (Netherlands)

Li, Y.; Li, Z.; Zheng, F.; Laven, J.

2014-01-01

Silver nanoparticles were synthesised successfully using poly(2-acrylamido-2-methylpropane sulphonic acid) (PAMPS) as a surfactant. Silver nanoparticles prepared through this approach possess high purity and narrow size distribution. The size distribution result shows that the diameters ranging from

Biodegradation test of SPS-LS blends as polymer electrolyte membrane fuel cells

Energy Technology Data Exchange (ETDEWEB)

Putri, Zufira, E-mail: zufira.putri@gmail.com, E-mail: arcana@chem.itb.ac.id; Arcana, I Made, E-mail: zufira.putri@gmail.com, E-mail: arcana@chem.itb.ac.id [Inorganic and Physical Chemistry Research Groups, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung, Bandung (Indonesia)

2014-03-24

Sulfonated polystyrene (SPS) can be applied as a proton exchange membrane fuel cell due to its fairly good chemical stability. In order to be applied as polymer electrolyte membrane fuel cells (PEMFCs), membrane polymer should have a good ionic conductivity, high proton conductivity, and high mechanical strength. Lignosulfonate (LS) is a complex biopolymer which has crosslinks and sulfonate groups. SPS-LS blends with addition of SiO{sub 2} are used to increase the proton conductivity and to improve the mechanical properties and thermal stability. However, the biodegradation test of SPS-LS blends is required to determine whether the application of these membranes to be applied as an environmentally friendly membrane. In this study, had been done the synthesis of SPS, biodegradability test of SPS-LS blends with variations of LS and SiO{sub 2} compositions. The biodegradation test was carried out in solid medium of Luria Bertani (LB) with an activated sludge used as a source of microorganism at incubation temperature of 37°C. Based on the results obtained indicated that SPS-LS-SiO{sub 2} blends are more decomposed by microorganism than SPS-LS blends. This result is supported by analysis of weight reduction percentage, functional groups with Fourier Transform Infrared (FTIR) Spectroscopy, and morphological surface with Scanning Electron Microscopy (SEM)

SPS in training for LHC

CERN Document Server

2003-01-01

On 8 and 9 September the new beam extraction system of the SPS and the downstream transfer line were successfully commissioned and tested. Using this extraction, a beam will be sent towards LHC in 2004 and to the CNGS facility in 2006.

The SPS acceleration system: travelling wave drift-tube structure for the CERN SPS

International Nuclear Information System (INIS)

Dome, G.

1976-01-01

The SPS accelerating structure is essentially a high energy proton linac, except for a small frequency swing during the acceleration cycle. It is operated almost CW with a travelling wave giving an energy gain around 0.1 MeV/m. The guide-lines for the design of such a structure are explained, and practical solutions are described. (author)

The environmental impact of SPS - A social view

International Nuclear Information System (INIS)

Canough, G.E.; Lehman, L.P.

1991-01-01

Prospective solar power satellite (SPS) systems entail extensive evaluation of real and perceived environmental impact, in virtue of their extremely high publicity profile. Attention is presently given to current understanding of SPS microwave power beaming system operations' effects on terrestrial communications and biological systems, as well as the associated consequences of a lengthy, heavy-payload launch program on space debris scenarios and stratospheric pollution by the launch vehicles' propellant combustion products. Education of the public in these issues is stressed. 7 refs

Search for the QCD critical point at SPS energies

CERN Document Server

Anticic, T.; Barna, D.; Bartke, J.; Betev, L.; Bialkowska, H.; Blume, C.; Boimska, B.; Botje, M.; Bracinik, J.; Buncic, P.; Cerny, V.; Christakoglou, P.; Chung, P.; Chvala, O.; Cramer, J.G.; Csato, P.; Dinkelaker, P.; Eckardt, V.; Fodor, Z.; Foka, P.; Friese, V.; Gal, J.; Gazdzicki, M.; Genchev, V.; Gladysz, E.; Grebieszkow, K.; Hegyi, S.; Hohne, C.; Kadija, K.; Karev, A.; Kikola, D.; Kolesnikov, V.I.; Kornas, E.; Korus, R.; Kowalski, M.; Kreps, M.; Laszlo, A.; Lacey, R.; van Leeuwen, M.; Levai, P.; Litov, L.; Lungwitz, B.; Makariev, M.; Malakhov, A.I.; Mateev, M.; Melkumov, G.L.; Mischke, A.; Mitrovski, M.; Mrowczynski, St.; Palla, G.; Panagiotou, A.D.; Petridis, A.; Peryt, W.; Pikna, M.; Pluta, J.; Prindle, D.; Puhlhofer, F.; Renfordt, R.; Roland, C.; Roland, G.; Rybczynski, M.; Rybicki, A.; Sandoval, A.; Schmitz, N.; Schuster, T.; Seyboth, P.; Sikler, F.; Sitar, B.; Skrzypczak, E.; Slodkowski, M.; Stefanek, G.; Stock, R.; Strabel, C.; Strobele, H.; Susa, T.; Szentpetery, I.; Sziklai, J.; Szuba, M.; Szymanski, P.; Trubnikov, V.; Utvic, M.; Varga, D.; Vassiliou, M.; Veres, G.I.; Vesztergombi, G.; Vranic, D.; Wlodarczyk, Z.; Wojtaszek-Szwarc, A.; Yoo, I.K.; Abgrall, N.; Aduszkiewicz, A.; Andrieu, B.; Anticic, T.; Antoniou, N.; Argyriades, J.; Asryan, A.G.; Blondel, A.; Blumer, J.; Boldizsar, L.; Bravar, A.; Brzychczyk, J.; Bubak, A.; Bunyatov, S.A.; Choi, K.-U.; Chung, P.; Cleymans, J.; Derkach, D.A.; Diakonos, F.; Dominik, W.; Dumarchez, J.; Engel, R.; Ereditato, A.; Feofilov, G.A.; Ferrero, A.; Gazdzicki, M.; Golubeva, M.; Grzeszczuk, A.; Guber, F.; Hasegawa, T.; Haungs, A.; Igolkin, S.; Ivanov, A.S.; Ivashkin, A.; Katrynska, N.; Kielczewska, D.; Kisiel, J.; Kobayashi, T.; Kolev, D.; Kolevatov, R.S.; Kondratiev, V.P.; Kowalski, S.; Kurepin, A.; Lacey, R.; Lyubushkin, V.V.; Majka, Z.; Marchionni, A.; Marcinek, A.; Maris, I.; Matveev, V.; Meregaglia, A.; Messina, M.; Mijakowski, P.; Montaruli, T.; Murphy, S.; Nakadaira, T.; Naumenko, P.A.; Nikolic, V.; Nishikawa, K.; Palczewski, T.; Planeta, R.; Popov, B.A.; Posiadala, M.; Przewlocki, P.; Rauch, W.; Ravonel, M.; Rohrich, D.; Rondio, E.; Rossi, B.; Roth, M.; Rubbia, A.; Sadovsky, A.; Sakashita, K.; Sekiguchi, T.; Seyboth, P.; Shibata, M.; Sissakian, A.N.; Sorin, A.S.; Staszel, P.; Stepaniak, J.; Strabel, C.; Stroebele, H.; Tada, M.; Taranenko, A.; Tsenov, R.; Ulrich, R.; Unger, M.; Vechernin, V.V.; Zipper, W.

2009-01-01

Lattice QCD calculations locate the QCD critical point at energies accessible at the CERN Super Proton Synchrotron (SPS). We present average transverse momentum and multiplicity fluctuations, as well as baryon and anti-baryon transverse mass spectra which are expected to be sensitive to effects of the critical point. The future CP search strategy of the NA61/SHINE experiment at the SPS is also discussed.

The SPS as accelerator of Pb$^{82+}$ ions

CERN Document Server

Faugier, A; Bailey, R; Blanchard, R R; Bohl, T; Brouzet, E; Burkhardt, H; Collier, Paul; Cornelis, Karel; de Rijk, G; Ferioli, F; Hilaire, A; Lamont, M; Linnecar, Trevor Paul R; Jonker, M; Niquille, C; Roy, G; Schmickler, Hermann

1996-01-01

In 1994 the CERN SPS was used for the first time to accelerate fully stripped ions of the Pb208 isotope from the equivalent proton momentum of 13 GeV/c to 400 GeV/c. In the CERN PS, which was used as injector, the lead was accelerated as Pb53+ ions and then fully stripped in the transfer line from PS to SPS. The radio frequency swing which is needed in order to keep the synchronism during acceleration is too big to have the SPS cavities deliver enough voltage for all frequencies. For that reason a new technique of fixed frequency acceleration was used. With this technique up to 70% of the injected beam could be captured and accelerated up to the extraction energy, the equivalent of 2.2 1010 charges. The beam was extracted over a 5 sec. long spill and was then delivered to different experiments at the same time.

Selectivity of benzene sulphonation in three gas—liquid reactors with different mass transfer characteristics: II: Mass transfer and selectivity in a cyclone reactor and in a tube reactor

NARCIS (Netherlands)

Beenackers, Antonie A.C.M.; van Swaaij, Willibrordus Petrus Maria

1978-01-01

Liquid benzene was sulphonated with gaseous sulphur trioxide in a tube reactor and in a new gas—liquid cyclone reactor. The products are benzenesulphonic acid and diphenyl sulphone (byproduct). The observed selectivity depends on the conversion, the initial benzene concentration and the mass

Extraction systems of the SPS

CERN Multimedia

CERN PhotoLab

1973-01-01

A pair of prototype septum magnets for the extraction systems of the SPS. Each of the two extraction systems will contain eighteen of these septum magnets (eight with a 4 mm septum and ten with a 16 mm septum) mounted in pairs in nine vacuum tanks.

Prototype of cavity for lepton acceleration in the SPS

CERN Multimedia

CERN PhotoLab

1982-01-01

The SPS was to be the injector for LEP and had to accelerate the electrons and positrons delivered by the PS. This is a prototype of a 200 MHz, single-cell, standing-wave, cavity for lepton acceleration in the SPS. On top of the cavity, at the back, is the tetrode amplifier, the tuning mechanism is leaning towards the viewer. See also 8103523 and Annual Report 1981, p.114.

Prinsip Transparansi dalam Perjanjian TBT dan SPS

Directory of Open Access Journals (Sweden)

Dina Widyaputri Kariodimedjo

2012-02-01

Full Text Available Transparency principle in the TBT and SPS Agreement is implemented by notification. Its application is prepared by related agencies through the making of regulations, establishment of enquiry points, building capacity and infrastructure. It guarantees certainty, predictability and credibility of Indonesia in international trade, and its application should not undermine national trade policy. Prinsip transparansi dalam Perjanjian TBT dan SPS diterapkan melalui notifikasi. Penerapan prinsip ini dilakukan oleh instansi-instansi terkait melalui pembuatan peraturan, upaya terkait kelembagaan, SDM dan infrastruktur. Prinsip yang bertujuan menciptakan kepastian, konsistensi bagi perdagangan dan kredibilitas Indonesia dalam perdagangan internasional, harus dilakukan tanpa mengorbankan kepentingan untuk mengamankan kebijakan impor nasional.

SPS, preassembly of short straight sections

CERN Multimedia

1975-01-01

Short straight sections were preassembled with their vacuum chambers, ready for installation in the SPS. Here we see two, containing sextupoles for chromaticity adjustment. See also 7501017, 7501018, and Annual Report 1976, p.174.

SPS, short straight section with sextupole

CERN Multimedia

CERN PhotoLab

1975-01-01

Short straight sections were preassembled with their vacuum chambers, ready for installation in the SPS. This one contains a sextupole for chromaticity adjustment. See also 7501017, 7501009X, and Annual Report 1974, p.174.

The CERN SPS proton–antiproton collider

CERN Document Server

Schmidt, Rudiger

2016-01-01

One of CERN's most ambitious and successful projects was the search for the intermediate bosons, W and Z [1]. The accelerator part of the project relied on a number of innovations in accelerator physics and technology. The invention of the method of stochastic cooling and the extension by many orders of magnitude beyond the initial proof of principle demonstration allowed the construction of the Antiproton Accumulator. Major modifications to the 26 GeV PS complex and the conversion of the 300 GeV SPS, which had just started up as an accelerator, to a collider were required. The SPS collider had to master the beam–beam effect far beyond limits reached before and had to function in a tight symbiosis with the UA1 and UA2 experiments.

Multimedia fate modeling of perfluorooctanoic acid (PFOA) and perfluorooctane sulphonate (PFOS) in the shallow lake Chaohu, China

NARCIS (Netherlands)

Kong, X.; Liu, W.; He, W.; Xu, F.; Koelmans, Albert A; Mooij, W.M.

2018-01-01

Freshwater shallow lake ecosystems provide valuable ecological services to human beings. However, these systems are subject to severe contamination from anthropogenic sources. Per- and polyfluoroalkyl substances (PFASs), including perfluorooctanoic acid (PFOA) and perfluorooctane sulphonate (PFOS),

Solar charge regulator and operation management for PV island systems with modern memory-programmable control (SPS); Solarladeregler und Betriebsmanagement fuer PV-Inselsysteme mit moderner Speicherprogrammierbarer Steuerung (SPS)

Energy Technology Data Exchange (ETDEWEB)

Dohlen, K. v.; Nussberger, B. [ENNOS Gesellschaft fuer Innovative Energiesysteme mbH, Freiburg (Germany)

1998-12-01

Modern memory programmable controls (SPS) are good value for money, powerful and have such a low power consumption that they are suitable for control and regulation purposes in PV island systems. The development of the solar charge regulators and operation management on the basis of an SPS shown in the article was carried out with the super-imposed target of increasing the use of proven standard industrial products in their construction and simplifying their operation and raising their reliability. [Deutsch] Moderne Speicherprogrammierbare Steuerungen (SPS) sind preiswert, leistungsfaehig und besitzen inzwischen eine so niedrige Leistungsaufnahme, dass sie zu Steuer- und Regelzwecken in PV-Inselsystemen geeignet sind. Die Entwicklung des im Beitrag vorgestellten Solarladereglers und Betriebsmanagement auf der Basis einer SPS stand unter der uebergeordneten Zielsetzung, PV-Anlagen durch den Einsatz von bewaehrten Standard-Industrieprodukten in ihrem Aufbau und der Bedienung zu vereinfachen und in ihrer Zuverlaessigkeit zu steigern. (orig.)

Slow extraction at the SPS: extraction efficiency and loss reduction studies

CERN Document Server

Fraser, M A; Cavoto, G; Galluccio, F; Gilardoni, S; Goddard, B; Iacoangeli, F; Kain, V; Mirarchi, D; Montesano, S; Murtas, F; Petrucci, S; Redaelli, S; Roncarolo, F; Rossi, R; Scandale, W; Stoel, L S; Velott, F M

2017-01-01

Elevated activation levels in LSS2 were first reported dur-ing an intervention on the SPS extraction septum (ZS) inSeptember 2015. The increase was attributed to higher in-tensity Fixed Target (FT) operation and poorer extractionefficiency, and reported to the IEFC [1]. Since this eventthe awareness of the impact of slow extraction losses on theoperation and maintenance of the SPS has been heightened.This is particularly pertinent in light of tightening limits ondose to personnel and recent requests for increased intensi-ties, as well as ambitious future experimental proposals inthe North Area (NA), such as the SPS Beam Dump Facility(BDF) [2]. To follow up these issues the SPS Losses andActivation Working Group (SLAWG) was formed.The MD programme for 2016 was originally foreseen totest the faster spill on a 1.2 second flat-top for the BDF andbenchmarksimulationsoftheextractionprocess, butthiswasnot possible due to the restrictions imposed by the TIDVG.Nevertheless, during operational set-up and re-alignmentof...

Synthesis of methyl ester sulphonate by sulfonation of soybean oil methyl ester for chemical flooding application

International Nuclear Information System (INIS)

Richie Adi Putra; Renisa Ismayanti; Agam Duma Kalista W

2018-01-01

This research has accomplished the synthesis of Surfactant Methyl Ester Sulphonate from Methyl Soyate and Sodium Bisulfite as sulfonating agent. The Steps of the synthesis were reaction, purification, neutralization, and separation. The reaction done by several variated condition such as Reaction Temperature (100, 110, 120)°C, Reaction time (210, 270, 330)minute, and the mole ratio between Methyl Soyate and NaHSO 3 (1:1, 1:1.5, 1:2) with 1.5 % of Al 2 O 3 as catalyst of sulfonation reaction. The purification process was conducted at 55 °C and 60 minute by adding Methanol 35 % v/v. The neutralization done was conducted by 20 % of NaOH until pH 6-8. And the rest of the methanol are separated from MES using rotary evaporator. MES which is pass the compatibility Test is MES at the condition of reaction (100 °C, 210 minute and 1 : 2 mole ratio).This MES has tested by FT - IR to see the existence of the Sulphonate group.The FT-IR test result has shown the existence of the Sulphonate group at wave length between 1000 until 1300 cm -1 . Which is the highest peak at 1176 cm-1. From the qualitative test above, then the MES performed by IFT Test with light oil of X- field as comparison. The IFT results has shown a decrease of the interfacial tensions between 12,000 ppm of brine water and the light oil with addition of 0.3 % (v/v) MES, from 3.36 dyne/cm 2 to 1.54 dyne/cm 2 . (author)

Conditions and requirements for a potential application of solar power satellites /SPS/ for Europe

Energy Technology Data Exchange (ETDEWEB)

Westphal, W. (Berlin, Technische Universitaet, Berlin, West Germany); Ruth, J. (ESA, European Space Research and Technology Centre, Noordwijk, Netherlands)

1980-12-01

The potential problems of a future introduction of Solar Power Satellites (SPS) as baseload power plants for Western European countries are considered, emphasizing the differences of SPS utilization in Europe compared with that in the USA as a result of geographical, orbital organizational, and industrial conditions. If estimated SPS safety zone areas are required, then the SPS system incorporating the 2.45 GHz microwave power transmission appears crucial for utilization in Western Europe in order to eliminate the large rectenna area requirements of an SPS 5 GW power system. A frequency variation of up to 5 or 10 GHz, and the application of either laser power transmission or solid state devices which could alleviate rectenna siting problems and restrictions on the use of the geosynchronous orbit are discussed.

Coupling and Vertical Dispersion Correction in the SPS

CERN Document Server

Aiba, M; Franchi, A; Tomas, R; Vanbavinckhove, G

2010-01-01

Consolidation of the coupling correction scheme in the LHC is challenged by a missing skew quadrupole family in Sector 3-4 at the start-up in 2009-2010. Simultaneous coupling and vertical dispersion correction using vertical orbit bumps at the sextupoles, was studied by analyzing turn-byturn data. This scheme was tested in the CERN SPS where the optical structure of arc cells is quite similar to the LHC. In the SPS, horizontal and vertical beam positions are measured separately with single plane BPMs, thus a technique to construct ”pseudo double plane BPM” is also discussed.

Analysis of sulphone based organic–inorganic hybrid epoxy nanocomposites for advanced engineering applications—Study of the mechanical, thermomechanical, XRD, EDS and physical properties

International Nuclear Information System (INIS)

Shree Meenakshi, K.; Pradeep Jaya Sudhan, E.; Menon, Prathibha G.

2012-01-01

Highlights: ► Novel sulphone based tetraglycidyl epoxy nanocomposites were developed for aerospace applications. ► Nano-reinforcements were incorporated and curing was done. ► Excellent results were obtained in the mechanical studies. The nanocomposites developed were flame retardant and hydrophobic. - Abstract: A study was made in the present investigation on sulphone containing tetraglycidyl epoxy nanocomposites to find its suitability for use in high performance applications. The synthesis and characterization of the sulphone tetraglycidyl epoxy resin denoted as ‘B’ was done as reported in our previous study. Nanoclay and POSS-amine nano-reinforcements denoted as N1 and N2 were incorporated into the synthesized epoxy resin. Curing was done with diaminodiphenylmethane (DDM) and bis(3-aminophenyl) phenylphosphine oxide (BAPPO) curing agents denoted as X and Y respectively. In our current research, we continue this research and study the mechanical, thermo-mechanical, X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), viscosity, epoxy equivalent weight (EEW) and gel permeation chromatography (GPC) studies.

Studies on the QCD Phase Diagram at SPS and FAIR

International Nuclear Information System (INIS)

Blume, Christoph

2013-01-01

A review of results of the energy scan program at the CERN-SPS by the NA49 experiment is given. Presented are observables related to the search for a critical point in the QCD phase diagram and for the onset of deconfinement. Furthermore, the ongoing experimental program of NA61 at the CRRN-SPS and the plans of the CBM experiment at FAIR are discussed.

The new control system of the SPS target sector

CERN Document Server

Carlier, E; Mecredy, N; O'Leary, J

1999-01-01

The SPS, the Super Proton Synchrotron at CERN, is an accelerator originally designed and commissioned in 1976 for protons. The control system of the SPS target stations, beam absorbers and other aperture limiting devices was developed in the seventies. It was mainly based on home made electronics and equipment dependent software. With time, this electronics has become obsolete, difficult to maintain in operation and not suitable for integration into a modern control system. In 1997, a project was set up to modernise the electronics and the related software. The new control system is largely based on standard industrial hardware and software components. SIEMENS Simatic S7-300 programmable logic controllers have been used as equipment controllers and connected through PROFIBUS to a Windows-NT front-end PC running the SIEMENS WinCC SCADA package which acts as local controller and remote access gateway. This fully industrial solution has been successfully integrated into the actual SPS accelerator control infrast...

Event-by-event fluctuations at SPS

CERN Document Server

Appelshauser, Harald; Adamova, D.; Agakichiev, G.; Belaga, V.; Braun-Munzinger, P.; Castillo, A.; Cherlin, A.; Damjanovic, S.; Dietel, T.; Dietrich, L.; Drees, A.; Esumi, S.I.; Filimonov, K.; Fomenko, K.; Fraenkel, Z.; Garabatos, C.; Glassel, P.; Hering, G.; Holeczek, J.; Kushpil, V.; Lenkeit, B.; Ludolphs, W.; Maas, A.; Marn, A.; Milosevic, J.; Milov, A.; Miskowiec, D.; Panebrattsev, Yu.; Petchenova, O.; Petracek, V.; Pfeiffer, A.; Rak, J.; Ravinovich, I.; Rehak, P.; Schmitz, W.; Schukraft, J.; Sedykh, S.; Shimansky, S.; Slvova, J.; Stachel, J.; Sumbera, M.; Tilsner, H.; Tserruya, Itzhak; Wessels, J.P.; Wienold, T.; Windelband, B.; Wurm, J.P.; Xie, W.; Yurevich, S.; Yurevich, V.; Appelshauser, Harald; Sako, Hiro

2005-01-01

Results on event-by-event fluctuations of the mean transverse momentum and net charge in Pb-Au collisions, measured by the CERES Collaboration at CERN-SPS, are presented. We discuss the centrality and beam energy dependence and compare our data to cascade calculations.

The extraction of rhodium from aqueous nitric acid by dinonylnaphthalene sulphonic acid

International Nuclear Information System (INIS)

Patel, N.M.; Miles, J.H.; Thornback, J.R.

1987-01-01

The extraction of rhodium from aqueous nitric acid using dinonylnaphthalene sulphonic acid has been investigated. The extraction occurs readily from 0.1 M to 1.0 M nitric acid and, since the rhodium is extracted as {Rh(H 2 O) 6 } 3+ into the inverted micelles of the organic solution, equilibration times are less than 5 minutes. Extraction is enhanced by addition of nitrite ion to form {Rh(H 2 O) 5 NO 2 } 2+ as the extracted species. (author)

Installation in the SPS tunnel

CERN Multimedia

1974-01-01

The SPS tunnel is 6910 m in circumference and has a cross section of 4 m inner diameter. It is situated at an elevation of 400 m above sea level at a depth below the surface varying between 23 and 65 m. Its walls are lined with a concrete shell of about 30 cm thickness. See also 7410043X

Improved electrochemical nucleic acid biosensor based on polyaniline-polyvinyl sulphonate

Energy Technology Data Exchange (ETDEWEB)

Prabhakar, Nirmal [Biomolecular Electronics and Conducting Polymer Research Group, National Physical Laboratory, Dr. K.S. Krishnan Marg, New Delhi-110012 (India); Centre for Biomedical Engineering, Indian Institute of Technology, Hauz Khas, New Delhi-110016 (India); Sumana, G.; Arora, Kavita [Biomolecular Electronics and Conducting Polymer Research Group, National Physical Laboratory, Dr. K.S. Krishnan Marg, New Delhi-110012 (India); Singh, Harpal [Centre for Biomedical Engineering, Indian Institute of Technology, Hauz Khas, New Delhi-110016 (India); Malhotra, B.D. [Biomolecular Electronics and Conducting Polymer Research Group, National Physical Laboratory, Dr. K.S. Krishnan Marg, New Delhi-110012 (India)], E-mail: bansi.malhotra@gmail.com

2008-05-01

DNA biosensor based on polyaniline (PANI)-polyvinyl sulphonate (PVS) has been fabricated using electrochemical entrapment technique for detection of organophosphorus pesticides (chlorpyrifos and malathion). These double stranded calf thymus DNA (dsCT-DNA) entrapped PANI-PVS/indium-tin-oxide (ITO) bioelectrodes have been characterized using square wave voltammetry (SWV), Fourier transform infra-red spectroscopy (FT-IR), scanning electron microscopy (SEM) and electrochemical impedance techniques, respectively. These dsCT-DNA entrapped PANI-PVS/ITO bioelectrodes have been found to have response time of 30 s, stability of about 6 months and detection limit for chlorpyrifos and malathion as 0.5 ppb and 0.01 ppm, respectively.

Improved electrochemical nucleic acid biosensor based on polyaniline-polyvinyl sulphonate

International Nuclear Information System (INIS)

Prabhakar, Nirmal; Sumana, G.; Arora, Kavita; Singh, Harpal; Malhotra, B.D.

2008-01-01

DNA biosensor based on polyaniline (PANI)-polyvinyl sulphonate (PVS) has been fabricated using electrochemical entrapment technique for detection of organophosphorus pesticides (chlorpyrifos and malathion). These double stranded calf thymus DNA (dsCT-DNA) entrapped PANI-PVS/indium-tin-oxide (ITO) bioelectrodes have been characterized using square wave voltammetry (SWV), Fourier transform infra-red spectroscopy (FT-IR), scanning electron microscopy (SEM) and electrochemical impedance techniques, respectively. These dsCT-DNA entrapped PANI-PVS/ITO bioelectrodes have been found to have response time of 30 s, stability of about 6 months and detection limit for chlorpyrifos and malathion as 0.5 ppb and 0.01 ppm, respectively

One-electron reduction of anthraquinone sulphonates: a pulse radiolysis study

International Nuclear Information System (INIS)

Pal, H.; Palit, D.K.; Mukherjee, T.; Mittal, J.P.

1991-01-01

Semiquinone free radicals, derived from 2-sulphonate, 1,5-disulphonate and 2,6-disulphonate derivatives of 9,10-anthraquinone, have been studied using pulse radiolysis and kinetic absorption spectrophotometry techniques. Spectroscopic characteristics of both neutral and anionic species have been ascertained. Kinetics of formation and decay, reactivity with oxygen and one-electron reduction potential values have been estimated. The semiquinone radicals have been shown to be very stable under suitable pH conditions where the equilibrium (2 semiquinone ↔ quinone + hydroquinone) lies predominantly to the left. From a measurement of the equilibrium constants at different pH, values of E 2 and E m have been calculated. (author)

Transverse mode coupling instability for leptons in the CERN SPS

Energy Technology Data Exchange (ETDEWEB)

Linnecar, T; Shaposhnikova, E N [European Organization for Nuclear Research, Geneva (Switzerland)

1996-08-01

The intensity of leptons accelerated in the SPS machine is limited by a vertical transverse instability. The results of measurements of the thresholds for this transverse instability are compared with theoretical predictions for different broad band impedance models of the SPS. The threshold intensities found for the transverse instability and the position of the losses in the cycle enable the parameters of the broadband resonant impedance to be specified. (author)

The capabilities of monochromatic EC neutrino beams with the SPS upgrade

International Nuclear Information System (INIS)

Espinoza, C; Bernabeu, J

2008-01-01

The goal for future neutrino facilities is the determination of the U(e3) mixing and CP violation in neutrino oscillations. This will require precision experiments with a very intense neutrino source and energy control. With this objective in mind, the creation of monochromatic neutrino beams from the electron capture decay of boosted ions by the SPS of CERN has been proposed. We discuss the capabilities of such a facility as a function of the energy of the boost and the baseline for the detector. We conclude that the SPS upgrade to 1000 GeV is crucial to reach a better sensitivity to CP violation iff it is accompanied by a longer baseline. We compare the physics potential for two different configurations: I) γ = 90 and γ = 195 (maximum achievable at present SPS) to Frejus; II) γ = 195 and γ = 440 (maximum achievable at upgraded SPS) to Canfranc. The main conclusion is that, whereas the gain in the determination of U(e3) is rather modest, setup II provides much better sensitivity to CP violation

The capabilities of monochromatic EC neutrino beams with the SPS upgrade

Science.gov (United States)

Espinoza, C.; Bernabéu, J.

2008-05-01

The goal for future neutrino facilities is the determination of the U(e3) mixing and CP violation in neutrino oscillations. This will require precision experiments with a very intense neutrino source and energy control. With this objective in mind, the creation of monochromatic neutrino beams from the electron capture decay of boosted ions by the SPS of CERN has been proposed. We discuss the capabilities of such a facility as a function of the energy of the boost and the baseline for the detector. We conclude that the SPS upgrade to 1000 GeV is crucial to reach a better sensitivity to CP violation iff it is accompanied by a longer baseline. We compare the physics potential for two different configurations: I) γ = 90 and γ = 195 (maximum achievable at present SPS) to Frejus; II) γ = 195 and γ = 440 (maximum achievable at upgraded SPS) to Canfranc. The main conclusion is that, whereas the gain in the determination of U(e3) is rather modest, setup II provides much better sensitivity to CP violation.

Composite films of poly-(ester-sulphonated) and poly-(3-methylthiophene) for ion-exchange voltammetry in acetonitrile solutions

International Nuclear Information System (INIS)

Scopece, Paolo; Moretto, Ligia M.; Polizzi, Stefano; Ugo, Paolo

2006-01-01

This paper describes the preparation and characterisation of a polymeric electrode coating based on a composite of the poly-(ester-sulphonated) Eastman AQ55[reg] (AQ55) and poly-(3-methylthiophene) (PMeT), which is used for the controlled uptake and partial release of electroactive cations in acetonitrile solutions. The film is prepared by electrochemical oxidation in acetonitrile of 3-methylthiophene on glassy carbon disks or Pt-quartz crystal electrodes pre-coated with a thin film of AQ55. The electropolymerisation process is controlled so that the overall number of positive charges of oxidised PMeT is equal to the number of negative charges of the sulphonate groups of AQ55. Cyclic voltammetry and quartz crystal microbalance measurements indicate that the AQ55/PMeT mixed film is stable in acetonitrile and that its cation-exchange properties depend on the applied potential. When the PMeT moieties are reduced, the film incorporate cations; following electrochemical oxidation of the coating causes a release of the incorporated cations which, however, is only partial. Scanning electron microscopy (SEM) examination of cross sections of the composite polymer layer indicate that it is really a bi-layer, made by an inner compact layer of AQ55 on which a thicker and porous PMeT layer is grown. The outer PMeT layer acts as a barrier whose ionic charges can be changed electrochemically from positive (oxidation) to neutral (reduction). These ionic charges hinder or allow, respectively, the permeation of redox cations which tend to interact with the negatively charged sulphonic sites of the AQ55 layer. Direct self-neutralization of part of the positive charges of oxidized PMeT by the AQ55 sulphonic groups allows the release of part of the redox cations incorporated previously in the mixed film when PMeT is in the reduced state. By operating in acetonitrile solutions without added electrolyte it is possible to increase the fraction of redox cations which are released in

European sail tower SPS [Solar Power Satellite] concept

Energy Technology Data Exchange (ETDEWEB)

Seboldt, W.; Leipold, M.; Hanowski, N. [Institute of Space Sensor Technology and Planetary Exploration, Cologne (Germany). German Aerospace Center; Klimke, M. [HOPE Worldwide Deutschland, Berlin (Germany)

2001-06-01

Based on a DLR-study in 1998/99 on behalf of ESA/ESTEC called ''System Concepts, Architectures and Technologies for Space Exploration and Utilization (SE and U)'' a new design for an Earth-orbiting Solar Power Satellite (SPS) has been developed. The design is called ''European Sail Tower SPS'' and consists mainly of deplorable sail-like structures derived from the ongoing DLR/ESA solar sail technology development activity. Such an SPS satellite features an extremely light-weight and large tower-like orbital system and could supply Europe with significant amounts of electrical power generated by photovoltaic cells and subsequently transmitted to earth via microwaves. In order to build up the sail tower, 60 units - each consisting of a pair of square-shaped sails - are moved from LEO to GEO with electric propulsion and successively assembled in GEO robotically on a central strut. Each single sail has dimensions of 150 m x 150 m and is automatically deployed, using four diagonal lightweight carbon fiber (CFRP) booms which are initially rolled up on a central hub. The electric thrusters for the transport to GEO could also be used for orbit and attitude control of the assembled tower which has a total length of about 15 km and would be mainly gravity gradient stabilized. Employing thin film solar cell technology, each sail is used as a solar array and produces an electric power in orbit of about 3.7 MW{sub e}. A microwave antenna with a diameter of 1 km transmits the power to a 10 km rectenna on the ground. The total mass of this 450 MW SPS is about 2100 tons. First estimates indicate that the costs for one kWh delivered in this way could compete with present day energy costs, if launch costs would decrease by two orders of magnitude. Furthermore, mass production and large numbers of installed SPS systems must be assumed in order to lower significantly the production costs and to reduce the influence of the expensive technology

Academic Training Lecture Regular Programme: Physics at the AD/PS/SPS

CERN Multimedia

2012-01-01

Physics at the AD/PS/SPS (1/4), by Lau Gatignon (CERN).   Monday, June 18, 2012 from 11:00 to 12:00 (Europe/Zurich) at CERN ( 222-R-001 - Filtration Plant )   Lecture 1: The CERN injector complex and beams for non-LHC physics. The various machines and beam lines in the CERN injector complex are presented, from the linacs to the SPS. Special emphasis is given to the beam lines at the PS and SPS machines: AD, North and East Areas, nTOF and CNGS and HiRadMad as well as the ion beams. A short outlook is given to possible future upgrades and projects.   More information here.  

Tune resonance phenomena in the SPS and machine protection via fast position interlocking

CERN Document Server

Baer, T; Bogey, T; Wenninger, J

2010-01-01

The Super Proton Synchrotron (SPS) at CERN with a peak energy of 450GeV is at the top of the LHC preaccelerator-complex. Apart from LHC, SPS is with Tevatron the accelerator with the largest stored beam energy, up to 2.5MJ. The SPS has a known vulnerability to fast equipment failures that led to an uncontrolled loss of a high intensity beam in 2008, which resulted in major damage of a main dipole. The beam loss was caused by a fast tune decrease towards an integer resonance. Simulations and distinct experimental studies provide clear understanding of the beam dynamics at different SPS tune resonances. Diverging closed orbit oscillations, dispersion explosion and abrupt increased beta-beating are the driving effects leading to a complete beam loss in as little as 3 turns (70us). Dedicated experiments of fast failures of the main power converters reveal that the current interlock systems are much too slow for an adequate machine protection. To counteract the vulnerability of the SPS, current research focuses on...

SPS transverse beam scraping and LHC injection losses

CERN Document Server

Drosdal, L; Bartmann, W; Bracco, C; Cornelis, K; Goddard, B; Meddahi, M; Veyrunes, E

2012-01-01

Machine protection sets strict requirements for the quality of the injected beam, in particular in the transverse plane. Losses at aperture restrictions and protection elements have to be kept at a minimum. Particles in the beam tails are lost at the tight transfer line collimators and can trigger the LHC beam abort system. These particles have to be removed by scrapers in the vertical and horizontal plane in the SPS. Scraping has become vital for high intensity LHC operation. This paper shows the dependence of injection quality on the SPS scraping and discusses an improved scraper setting up strategy for better reproducibility with the current scraper system.

Preliminary assessment of the environmental impacts of the Satellite Power System (SPS)

International Nuclear Information System (INIS)

Halverson, S.L.; Rote, D.M.; Rush, C.M.; Davis, K.; White, M.; Cahill, D.F.

1978-01-01

The impact of the Satellite Power System (SPS) Microwave Power Transmission System (MPTS) as well as impacts related to other elements of the total SPS on the environment are being determined. The goal of these programs is to advance the state of knowledge by the year 1980 to the point where an assessment can be made of the probability and severity of the impacts of the SPS. Assessments will be made of the effects on the health and safety of the public, and occupationally involved personnel, and the ecology; the upper and lower atmosphere including climatological impacts; and on communications systems including electromagnetic compatibility, the effects of microwave heating of the ionosphere and magnetosphere, and the effects of F-layer depletion by launch vehicle and transport vehicle effluents. If the assessment indicates that the impacts are acceptable or that feasible mitigating strategies can be implemented and if other related assessments (the impact on society and a competitive comparison of the SPS with other energy alternatives) are favorable, a decision may be made to implement the development of the SPS related technologies. This paper identifies postulated effects and summarizes the research efforts to determine whether or not these effects will occur

SPS Ion Induced Desorption Experiment

CERN Multimedia

Maximilien Brice

2003-01-01

This experiment will give a study about the induced desorption from heavy ion (Indium ion run from week 45 in SPS T4-H8 area) impacting LHC type graphite collimator. 4 different samples are located in the 4 chambers 90° one to each other: pure graphite, graphite with copper coating, graphite with NEG coating, 316LN stainless steal (reference).

The New Control and Interlock System for the SPS Main Power Converters

CERN Document Server

Denis, B; Mugnier, C; Varas, J

1999-01-01

The Control and Interlock System (CIS) of the SPS main power converters was designed in the mid-70s and became increasingly difficult to maintain. A new system based on Programmable Logic Controllers has been developed by an external contractor in close collaboration with CERN. The system is now operational and fully integrated in the SPS/LEP control infrastructure. The CIS is the first major contracted industrial solution used to control accelerator equipment directly involved in the production of particle beams at CERN. This paper gives an overview of the SPS main power converter installation and describes both the contractual and technical solution adopted for the CIS. It first explains how the system was specified and how the contractual relationship was defined to respect CERN’s purchasing rules and the operational requirements of the SPS accelerator. The architectural design of the new system is presented with special emphasis on how the conflict between safety and availability has been addressed.

The new control system of the SPS injection kicker

CERN Document Server

Antoine, A; Marchand, A; Verhagen, H

2002-01-01

The SPS accelerator will be used as injector for the LHC and has to be adapted to the LHC requirements. The tight specification on beam blow-up and bunch spacing in the SPS has required an upgrade program of the SPS injection kicker in order to obtain a reduction of the magnetic field ripple to less than ± 0.5% and of the magnet current rise time to less than 145 ns. In this context, the slow control part has been entirely rebuilt on the basis of off-the-shelf industrial components. A hierarchical architecture based on a SIEMENS S7-400 master programmable logic controller interconnected through PROFIBUS-DP to S7-300 deported and decentralised I/Os has been implemented. Integration of in-house specific G-64 hardware systems inside this industrial environment has been done through a PROFIBUS-DP to G-64 intelligent interface based on an OEM fieldbus mezzanine board on one side and an FPGA implementing the required functionality on the other. Simultaneously, the fast timing system has been completely reshuffled ...

Polypyrrole-polyvinyl sulphonate film based disposable nucleic acid biosensor

Energy Technology Data Exchange (ETDEWEB)

Prabhakar, Nirmal [Biomolecular Electronics and Conducting Polymer Research Group, National Physical Laboratory, Dr. K.S. Krishnan Road, New Delhi 110012 (India); Centre for Biomedical Engineering, Indian Institute of Technology, Hauz Khas, New Delhi 110016 (India); Arora, Kavita [Biomolecular Electronics and Conducting Polymer Research Group, National Physical Laboratory, Dr. K.S. Krishnan Road, New Delhi 110012 (India); Singh, Surinder P. [Biomolecular Electronics and Conducting Polymer Research Group, National Physical Laboratory, Dr. K.S. Krishnan Road, New Delhi 110012 (India); Pandey, Manoj K. [Biomolecular Electronics and Conducting Polymer Research Group, National Physical Laboratory, Dr. K.S. Krishnan Road, New Delhi 110012 (India); Singh, Harpal [Centre for Biomedical Engineering, Indian Institute of Technology, Hauz Khas, New Delhi 110016 (India); Malhotra, Bansi D. [Biomolecular Electronics and Conducting Polymer Research Group, National Physical Laboratory, Dr. K.S. Krishnan Road, New Delhi 110012 (India)]. E-mail: bansi.malhotra@gmail.com

2007-04-18

Double stranded calf thymus deoxyribonucleic acid entrapped polypyrrole-polyvinyl sulphonate (dsCT-DNA-PPy-PVS) films fabricated onto indium-tin-oxide (ITO) coated glass plates have been used to detect organophosphates such as chlorpyrifos and malathion. These disposable dsCT-DNA-PPy-PVS/ITO bioelectrodes have been characterized using cyclic voltammetry, Fourier-transform-infra-red (FTIR) spectroscopy and atomic force microscopy (AFM), respectively. These biosensing electrodes have a response time of 30 s, are stable for about 5 months when stored in desiccated conditions at 25 deg. C and can be used to amperometrically detect chlorpyrifos (0.0016-0.025 ppm) and malathion (0.17-5.0), respectively. The additive effect of these pesticides on the amperometric response of the disposable dsCT-DNA-PPy-PVS/ITO bioelectrodes has also been investigated.

Assessors for communication skills: SPs or healthcare professionals?

Science.gov (United States)

Liew, Siaw-Cheok; Dutta, Susmita; Sidhu, Jagmohni Kaur; De-Alwis, Ranjit; Chen, Nicole; Sow, Chew-Fei; Barua, Ankur

2014-07-01

The complexity of modern medicine creates more challenges for teaching and assessment of communication skills in undergraduate medical programme. This research was conducted to study the level of communication skills among undergraduate medical students and to determine the difference between simulated patients and clinical instructors' assessment of communication skills. This comparative study was conducted for three months at the Clinical Skills and Simulation Centre of the International Medical University in Malaysia. The modified Calgary-Cambridge checklist was used to assess the communication skills of 50 first year and 50 second year medical students (five-minutes pre-recorded interview videos on the scenario of sore throat). These videos were reviewed and scored by simulated patients (SPs), communication skills instructors (CSIs) and non-communication skills instructors (non-CSIs). Better performance was observed among the undergraduate medical students, who had formal training in communication skills with a significant difference in overall scores detected among the first and second year medical students (p = 0.0008). A non-significant difference existed between the scores of SPs and CSIs for Year 1 (p = 0.151). The SPs could be trained and involved in assessment of communication skills. Formal training in communication skills is necessary in the undergraduate medical programme.

MODELLING SLOW EXTRACTION INDUCED RADIOACTIVITY IN SPS LSS2

CERN Document Server

Araujo Martinez, Aurora Cecilia; CERN. Geneva. TE Department

2017-01-01

The Accelerator and Beam Transfer (ABT) group is investigating the impact of recent proposals to extract higher proton intensities to Fixed Target experiments at the SPS. The 400 GeV high-energy proton beam is typically extracted over a few seconds using a resonant slow-extraction technique that induces small but unavoidable beam losses on the extraction equipment in SPS LSS2. In this report, the induced radioactivity for 2016-2017 is used to predict future activation levels and cool-down times, using a past intervention as a reference to predict dose to the personnel carrying-out maintenance of the accelerator.

Arabidopsis thaliana sucrose phosphate synthase (sps) genes are expressed differentially in organs and tissues, and their transcription is regulated by osmotic stress.

Science.gov (United States)

Solís-Guzmán, María Gloria; Argüello-Astorga, Gerardo; López-Bucio, José; Ruiz-Herrera, León Francisco; López-Meza, Joel Edmundo; Sánchez-Calderón, Lenin; Carreón-Abud, Yazmín; Martínez-Trujillo, Miguel

2017-11-01

Sucrose is synthesized from UDP-Glc and Fru-6-phosphate via the activity of sucrose-phosphate synthase (SPS) enzymes, which produce Suc-6-phosphate. Suc-6-phosphate is rapidly dephosphorylated by phosphatases to produce Suc and inorganic phosphate. Arabidopsis has four sps genes encoding SPS enzymes. Of these enzymes, AtSPS1F and AtSPS2F have been grouped with other dicotyledonous SPS enzymes, while AtSPS3F and AtSPS4F are included in groups with both dicotyledonous and monocotyledonous SPS enzymes. In this work, we generated Arabidopsis thaliana transformants containing the promoter region of each sps gene fused to gfp::uidA reporter genes. A detailed characterization of expression conferred by the sps promoters in organs and tissues was performed. We observed expression of AtSPS1F, AtSPS2F and AtSPS3F in the columella roots of the plants that support sucrose synthesis. Hence, these findings support the idea that sucrose synthesis occurs in the columella cells, and suggests that sucrose has a role in this tissue. In addition, the expression of AtSPS4F was identified in embryos and suggests its participation in this developmental stage. Quantitative transcriptional analysis of A. thaliana plants grown in media with different osmotic potential showed that AtSPS2F and AtSPS4F respond to osmotic stress. Copyright © 2017 Elsevier B.V. All rights reserved.

A Beam Quality Monitor for LHC Beams in the SPS

CERN Document Server

Papotti, G

2008-01-01

The SPS Beam Quality Monitor (BQM) system monitors the longitudinal parameters of the beam before extraction to the LHC to prevent losses and degradation of the LHC luminosity by the injection of low quality beams. It is implemented in two priority levels. At the highest level the SPS-LHC synchronization and global beam structure are verified. If the specifications are not met, the beam should be dumped in the SPS before extraction. On the second level, individual bunch position, length and stability are checked for beam quality assessment. Tolerances are adapted to the mode of operation and extraction to the LHC can also be inhibited. Beam parameters are accessed by acquiring bunch profiles with a longitudinal pick up and fast digital oscilloscope. The beam is monitored for instabilities during the acceleration cycle and thoroughly checked a few ms before extraction for a final decision on extraction interlock. Dedicated hardware and software components implementing fast algorithms are required. In this pape...

Performance of Carbon Coatings for Mitigation of Electron Cloud in the SPS

CERN Document Server

Yin Vallgren, C; Costa Pinto, P; Neupert, H; Rumolo, G; Shaposhnikova, E; Taborelli, M; Kato, S

2011-01-01

Amorphous carbon (a-C) coatings have been tested in electron cloud monitors (ECM) in the Super Proton Synchrotron (SPS) and have shown for LHC type beams a reduction of the electron cloud current by a factor 104 compared to stainless steel (StSt). This performance has been maintained for more than 3 years under SPS operation conditions. Secondary electron yield (SEY) laboratory data confirm that after more than 1 year of SPS operation, the coating maintains a SEY below 1.0. The compatibility of coexisting StSt and a-C surfaces has been studied in an ECM having coated and uncoated areas. The results show no degradation of the properties of the a-C areas. The performance of diamond like carbon (DLC) coating has also been studied. DLC shows a less effective reduction of the EC current than a-C, but conditioning is faster than for StSt. Three a-C coated dipoles were inserted in the SPS. However, even with no EC detected, the dynamic pressure rise is similar to the one observed in the StSt reference dipoles. Measu...

Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 2, part 2: System engineering, cost and programmatics

Science.gov (United States)

Hanley, G. M.

1979-01-01

Volume 2, Part 2, of a seven volume Satellite Power Systems (SPS) report is presented. Part 2 covers cost and programmatics and is divided into four sections. The first section gives illustrations of the SPS reference satellite and rectenna concept, and an overall scenario for SPS space transportation involvement. The second section presents SPS program plans for the implementation of PHASE C/D activities. These plans describe SPS program schedules and networks, critical items of systems evolution/technology development, and the natural resources analysis. The fourth section presents summary comments on the methods and rationale followed in arriving at the results documented. Suggestions are also provided in those areas where further analysis or evaluation will enhance SPS cost and programmatic definitions.

Successful test of SPS-to-LHC beamline

CERN Multimedia

Maximilien Brice

2004-01-01

On 23 October there was great excitement in the Prevessin control room when, on the first attempt, a beam passed over 2.5 km down the new SPS-to-LHC transfer line, TI8, to within a few metres of the LHC tunnel.

SPS: scrubbing or coating ?

CERN Document Server

Jimenez, J M

2012-01-01

The operation of the SPS with high intensity bunched beams is limited by the electron cloud building-up in both the arcs and long straight sections. Two consolidation options have been considered: mitigation of the electron cloud using coatings or relying, as before, on the scrubbing runs. A status report on both options will be given with a particular emphasis on measurements plans for 2012 and pending issues. The testing needs, corresponding beam parameters and MD time in 2012 will be addressed. The criteria for the decision making and the corresponding schedule will be discussed.

SPS Internship: Working With Physics To Go

Science.gov (United States)

Hancock, Logan

2008-10-01

The Physics To Go website (www.physicstogo.com) is one of many collections of ComPADRE, an online library of electronic resources devoted to physics and astronomy education, funded by the National Science Foundation. Physics To Go, produced by the American Physical Society (APS), is a collection focused on informal physics learning, targeted towards self-motivated learners and the general public. My contributions to the site this summer consisted of obtaining useful materials to add to the collection and working to update the homepage's ``mini-magazine'' every two weeks. I was selected for this position at APS by the Society of Physics Students (SPS) summer internship program, hosted by the American Institute of Physics (AIP) in College Park, MD. This internship is presented to a number of physics undergraduates each year and offers opportunities in research and science policy/outreach positions at SPS, APS, AAPT, NASA, and NIST.

Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 2, part 2: System engineering, cost and programmatics, appendixes

Science.gov (United States)

Hanley, G. M.

1979-01-01

Appendixes for Volume 2 (Part 2) of a seven volume Satellite (SPS) report are presented. The document contains two appendixes. The first is a SPS work breakdown structure dictionary. The second gives SPS cost estimating relationships and contains the cost analyses and a description of cost elements that comprise the SPS program.

Considerations on a new fast extraction kicker concept for SPS

CERN Document Server

Barnes, M

2010-01-01

An alternative extraction kicker concept is investigated for the SPS, based on open C-type kickers and a fast-bumper system. The beam is moved into the kicker gap some tens of ms before extraction. The concept is illustrated in detail with the LSS4 extraction from the SPS – very similar parameters and considerations apply to LSS6. A similar concept could also be conceived for injection but is more difficult due to the larger beam size. The technical issues are presented and the potential impact on the machine impedance outlined.

The insecticide fipronil and its metabolite fipronil sulphone inhibit the rat α1β2γ2L GABAA receptor

Science.gov (United States)

Li, P; Akk, G

2008-01-01

Background and purpose: Fipronil is the active ingredient in a number of widely used insecticides. Human exposure to fipronil leads to symptoms (headache, nausea and seizures) typically associated with the antagonism of GABAA receptors in the brain. In this study, we have examined the modulation of the common brain GABAA receptor subtype by fipronil and its major metabolite, fipronil sulphone. Experimental approach: Whole-cell and single-channel recordings were made from HEK 293 cells transiently expressing rat α1β2γ2L GABAA receptors. Key results: The major effect of fipronil was to increase the rate of current decay in macroscopic recordings. In single-channel recordings, the presence of fipronil resulted in shorter cluster durations without affecting the intracluster open and closed time distributions or the single-channel conductance. The α1V256S mutation, previously shown alleviate channel inhibition by inhibitory steroids and several insecticides, had a relatively small effect on channel block by fipronil. The mode of action of fipronil sulphone was similar to that of its parent compound but the metabolite was less potent at inhibiting the α1β2γ2L receptor. Conclusions and implications: We conclude that exposure to fipronil induces accumulation of receptors in a novel, long-lived blocked state. This process proceeds in parallel with and independently of, channel desensitization. The lower potency of fipronil sulphone indicates that the conversion serves as a detoxifying process in mammalian brain. PMID:18660823

Physics at the SPS

Science.gov (United States)

Gatignon, L.

2018-05-01

The CERN Super Proton Synchrotron (SPS) has delivered a variety of beams to a vigorous fixed target physics program since 1978. In this paper, we restrict ourselves to the description of a few illustrative examples in the ongoing physics program at the SPS. We will outline the physics aims of the COmmon Muon Proton Apparatus for Structure and Spectroscopy (COMPASS), north area 64 (NA64), north area 62 (NA62), north area 61 (NA61), and advanced proton driven plasma wakefield acceleration experiment (AWAKE). COMPASS studies the structure of the proton and more specifically of its spin. NA64 searches for the dark photon A', which is the messenger for interactions between normal and dark matter. The NA62 experiment aims at a 10% precision measurement of the very rare decay K+ → π+νν. As this decay mode can be calculated very precisely in the Standard Model, it offers a very good opportunity to look for new physics beyond the Standard Model. The NA61/SHINE experiment studies the phase transition to Quark Gluon Plasma, a state in which the quarks and gluons that form the proton and the neutron are de-confined. Finally, AWAKE investigates proton-driven wake field acceleration: a promising technique to accelerate electrons with very high accelerating gradients. The Physics Beyond Colliders study at CERN is paving the way for a significant and diversified continuation of this already rich and compelling physics program that is complementary to the one at the big colliders like the Large Hadron Collider.

Dilution kicker for the SPS beam dump

CERN Multimedia

1974-01-01

In order to reduce thermal stress on the SPS dump material, the fast-ejected beam was swept horizontally across the dump. This was done with the "dilution kicker" MKDH, still in use at the time of writing. The person on the left is Manfred Mayer. See also 7404072X.

SPS: scrubbing or coating?

International Nuclear Information System (INIS)

Jimenez, J.M.

2012-01-01

The operation of the SPS with high intensity bunched beams is limited by the electron cloud building-up in both the arcs and long straight sections. Two consolidation options have been considered: suppression of the electron cloud build-up using coatings or relying, as before, on the scrubbing mitigation. A status report on both options will be given with a particular emphasis on measurements plans for 2012 and pending issues. The testing needs, corresponding beam parameters and MD time in 2012 will be addressed. The criteria for the decision making and the corresponding schedule will be discussed. (author)

Comparative studies on mechanical properties of WC-Co composites sintered by SPS and conventional techniques

Directory of Open Access Journals (Sweden)

Pristinskiy Yuri

2017-01-01

Full Text Available Spark plasma sintering (SPS is an extremely fast solidification technique for compounds that are difficult to sinter within the material group metals, ceramics, or composites thereof, SPS uses a uniaxial pressure and a very rapid heating cycle to consolidate these materials. With SPS the main benefit is the ability to control the WC grain size due to the short sintering times at high temperature. Additionally, its allows to avoid negative reactions between WC and cobalt and to minimize the formation of undesirable phases in sintered composites. The WC-6wt.% Co cermet prepared by SPS processing achieves the enhanced mechanical properties with the hardness of 18.3 GPa and the fracture toughness of 15.5 MPa·m1/2 in comparison to standard reference tungsten carbide/cobalt material.

Evolution of the SPS Power Converter Controls towards the LHC Era

CERN Document Server

Brazier, J.C.L.; Semanaz, P.

2001-01-01

By the end of the nineties, the power converter control system (Mugef) of the CERN proton accelerator (SPS) had undergone a complete modernization. This resulted in newly developed hardware for function generation, measurement and I/O in a VME environment, under the LynxOS real-time operating system. This has provided a platform on which extensions can be developed for future operation in the Large Hadron Collider (LHC) era. This paper describes some of these extensions, in particular a fast Surveillance and Interlock system for monitoring the power converter output currents. This will be mandatory for the safe operation of the SPS transfer lines TI2 & TI8 to LHC and for similar applications in the future. The strategies employed to cope with various failure modes of the power converters and the timely activation of the interlock are outlined. The new SPS controls infrastructure now under development, will give rise to new modes of operation for the Mugef systems. Integration with the proposed middleware ...

The SPS Individual Bunch Measurement System

CERN Document Server

Guerrero, A; Jones, R; Savioz, J J

2001-01-01

The Individual Bunch Measurement System (IBMS) allows the intensity of each bunch in an LHC batch to be the measured both in the PS to SPS transfer lines and in the SPS ring itself. The method is vased on measuring the peak and valley of the analogue signal supplied by a Fast Beam Current Transformer at a frequency of 40 MHz. A 12 bit acquisition system is required to obtain a 1% resolution for the intensity range of 5X10`9 to 1.7X10`11 protons per bunch, corresponding to the pilot and ultimate LHC bunch intensities. The acquisition selection and external trigger adjustment system is driven by the 200MHz RF, which is distributed using a single-mode fibre-optic link. A local oscilloscope, controlled via a GPIB interface, allows the remote adjustment of the timing signals. The low-level software consists of a real-time task and a communication server run on a VME Power PC, which is accessed using a graphical user interface. This paper describes the system as a whole and presents some recent uses and results fro...

Monitoring the extracted proton beam at the SPS

CERN Multimedia

CERN PhotoLab

1977-01-01

Fluorescent screens in front of the target positions allow a precise adjustement in front of them. A similar photo was recorded at the beam dump at the beam injection into the SPS, see Weekly Bulletin of April 1976.

Produced Water Treatment Using the Switchable Polarity Solvent Forward Osmosis (SPS FO) Desalination Process: Preliminary Engineering Design Basis

Energy Technology Data Exchange (ETDEWEB)

Wendt, Daniel; Adhikari, Birendra; Orme, Christopher; Wilson, Aaron

2016-05-01

Switchable Polarity Solvent Forward Osmosis (SPS FO) is a semi-permeable membrane-based water treatment technology. INL is currently advancing SPS FO technology such that a prototype unit can be designed and demonstrated for the purification of produced water from oil and gas production operations. The SPS FO prototype unit will used the thermal energy in the produced water as a source of process heat, thereby reducing the external process energy demands. Treatment of the produced water stream will reduce the volume of saline wastewater requiring disposal via injection, an activity that is correlated with undesirable seismic events, as well as generate a purified product water stream with potential beneficial uses. This paper summarizes experimental data that has been collected in support of the SPS FO scale-up effort, and describes how this data will be used in the sizing of SPS FO process equipment. An estimate of produced water treatment costs using the SPS FO process is also provided.

Measurements on the SPS 200 MHz Travelling Wave Cavity towards an Impedance Model

CERN Document Server

Roggen, Toon; Caspers, Fritz; Vollinger, Christine; CERN. Geneva. ATS Department

2016-01-01

This note discusses the contribution of the SPS 200 MHz TWC (Travelling Wave Cavity) to the SPS longitudinal impedance model. The measurement method and setup is briefly explained and a comparison with simulations is discussed for both the fundamental pass band (FPB) as well as the Higher Order Modes (HOMs). In addition a number of improvements to the measurement setup are discussed.

From SPS to relativistic heavy-ion collider

Indian Academy of Sciences (India)

higher temperature, longer lifetime) for the study of quark matter. The advent ... A prominent topic of interest is the identification of thermal radiation emitted from the collision ... List of measurements at the CERN SPS. Dileptons .... There is consensus that a simple superposition of pp collisions cannot explain the data and that ...

Experiment NA57 at the CERN SPS

Czech Academy of Sciences Publication Activity Database

Antinori, F.; Balada, A.; Barbera, R.; Píška, Karel; Staroba, Pavel; Závada, Petr

1999-01-01

Roč. 25, - (1999), s. 473-479 ISSN 0954-3899 Institutional research plan: CEZ:AV0Z1010920 Keywords : NA57 * production of strange, multistrange particles * baryons, antibaryons * ultrarelativistic nucleus - nucleus collisions * SPS * strangeness enhancement * number of participants Subject RIV: BF - Elementary Particles and High Energy Physics Impact factor: 1.620, year: 1999

Wire compensation: Performance, SPS MDs, pulsed system

CERN Document Server

Dorda, U

2008-01-01

A wire compensation (BBLR) scheme has been proposed in order to improve the long range beam-beam performance of the nominal LHC and its phase 1 and phase 2 upgrades[1]. In this paper we present experimental experience of the CERN SPS wires (BBLR) and report on progress with the RF BBLR.

The damper for the transverse instabilities of the SPS

CERN Document Server

Bossart, Rudolf; Gareyte, Jacques; de Raad, Bastiaan; Rossi, V

1979-01-01

For beam intensities above 10/sup 12/ protons per pulse in the SPS, collective transverse beam instabilities develop with frequencies between 15 kHz and 3 MHz because of the resistive wall effect of the vacuum chamber. An active feedback system with an electrostatic deflector has been installed in the SPS for damping the resistive wall instabilities in both the vertical and horizontal planes. Measurements have been made to determine the threshold and growth rate of these instabilities. As a novel application, the damper can be used also for the excitation of small coherent betatron oscillations. A phase-locked loop tracks the beam oscillations and provides a continuous display of the betatron wave-number Q during the cycle. (4 refs).

The insecticide fipronil and its metabolite fipronil sulphone inhibit the rat alpha1beta2gamma2L GABA(A) receptor.

Science.gov (United States)

Li, P; Akk, G

2008-11-01

Fipronil is the active ingredient in a number of widely used insecticides. Human exposure to fipronil leads to symptoms (headache, nausea and seizures) typically associated with the antagonism of GABA(A) receptors in the brain. In this study, we have examined the modulation of the common brain GABA(A) receptor subtype by fipronil and its major metabolite, fipronil sulphone. Whole-cell and single-channel recordings were made from HEK 293 cells transiently expressing rat alpha1beta2gamma2L GABA(A) receptors. The major effect of fipronil was to increase the rate of current decay in macroscopic recordings. In single-channel recordings, the presence of fipronil resulted in shorter cluster durations without affecting the intracluster open and closed time distributions or the single-channel conductance. The alpha1V256S mutation, previously shown alleviate channel inhibition by inhibitory steroids and several insecticides, had a relatively small effect on channel block by fipronil. The mode of action of fipronil sulphone was similar to that of its parent compound but the metabolite was less potent at inhibiting the alpha1beta2gamma2L receptor. We conclude that exposure to fipronil induces accumulation of receptors in a novel, long-lived blocked state. This process proceeds in parallel with and independently of, channel desensitization. The lower potency of fipronil sulphone indicates that the conversion serves as a detoxifying process in mammalian brain.

The SHiP experiment at CERN SPS

CERN Document Server

Di Crescenzoon, A

2016-01-01

SHiP is a new general purpose fixed target facility, whose Technical Proposal has been recently submitted to the CERN SPS Committee. In its initial phase, the 400 GeV proton beam extracted from the SPS will be dumped on a heavy target with the aim of integrating 2 × 1020 pot in 5 years. A dedicated detector located downstream of the target, based on a long vacuum tank followed by a spectrometer and particle identification detectors, will allow probing a variety of models with light long-lived exotic particles and masses below a few GeV/c2. The beam dump is also an ideal source of tau neutrinos, the less known particle in the Standard Model. Another dedicated detector, based on the Emulsion Cloud Chamber technology already used in the OPERA experiment, will allow to perform for the first time measurements of the tau neutrino deep inelastic scattering cross section. Tau neutrinos will be distinguished from tau anti-neutrinos, thus providing the first observation of the tau anti-neutrino.

Measurement and analysis of SPS kicker magnet heating and outgassing with Different Bunch Spacing

CERN Document Server

Barnes, M J; Cornelis, K; Ducimetière, L; Mahner, E; Papotti, G; Rumolo, G; Senaj, V; Shaposhnikova, E

2010-01-01

Fast kicker magnets are used to inject beam into and eject beam out of the CERN SPS accelerator ring. These kickers are generally ferrite loaded transmission line type magnets with a rectangular shaped aperture through which the beam passes. Unless special precautions are taken the impedance of the ferrite yoke can provoke significant beam induced heating, over several hours, even above the Curie temperature of the ferrite. At present the nominal bunch spacing in the SPS is 25 ns, however for an early stage of LHC operation it is preferable to have 50 ns bunch spacing. Machine Development (MD) studies have been carried out with an inter-bunch spacing of 25 ns, 50 ns or 75 ns. For some of the SPS kicker magnets the 75 ns bunch spacing resulted in considerable beam induced heating. In addition the MDs showed that 50 ns bunch spacing could result in a very rapid pressure rise in the kicker magnet and thus cause an interlock. This paper discusses the MD observations of the SPS kickers and analyses the available d...

Mechanical characterization of cemented carbide WC-6Co (%wt) manufactured by SPS (Spark Plasma Sintering; Caracterizacao mecanica de metal duro WC-6Co (%massa) sinterizado via SPS (Spark Plasma Sintering)

Energy Technology Data Exchange (ETDEWEB)

Boidi, G.; Tertuliano, A.J.; Machado, I.F., E-mail: guido.boidi@usp.br [Universidade de Sao Paulo (USP), SP (Brazil). Departamento de Engenharia Mecatronica e Sistemas Mecanicos; Rodrigues, D. [BRATS- Filtros Sinterizados e Pos Metalicos, Cajamar, SP (Brazil)

2016-07-01

This work aimed to manufacture cemented carbide (WC-6%wtCo) obtained by SPS (Spark Plasma Sintering) process and to carry out the mechanical characterization by hardness and fracture toughness. The material was consolidated at 1100 deg C for different holding times (1 min, 5 min, 10 min), in order to evaluate the densification. A reference sample was also used to be compared to SPS. Optical and scanning electron microscopy were carried out to characterize the microstructural features of the samples and mechanical properties were obtained by hardness measurements (micro and macro) and instrumented indentation. The fracture toughness was calculated with the method of Palmqvist. Best results were found in the material sintered by SPS for 10 minutes of holding time, in which 97% of relative density and about 1600 HV{sub 10} was reached. (author)

Satellite Power Systems (SPS) concept definition study (Exhibit D). Volume 5: Systems engineering/integration research and technology

Science.gov (United States)

Hanley, G. M.

1981-01-01

Guidelines and ground rules followed in the development of requirements for the SPS are presented. Development planning objectives are specified in each of these areas, and evolutionary SPS program scenarios are described for the various concepts studied during the past one year contract. Program descriptions are presented as planning packages of technical tasks, and schedule phasing. Each package identifies the ground based technology effort that will facilitate SPS definitions, designs, development, and operations.

Using Systemic Problem Solving (SPS) to Assess Student ...

African Journals Online (AJOL)

This paper focuses on the uses of systemic problem solving in chemistry at the tertiary level. Traditional problem solving (TPS) is a useful tool to help teachers examine recall of information, comprehension, and application. However, systemic problem solving (SPS) can challenge students and probe higher cognitive skills ...

Satellite Power System (SPS): an Overview of Prospective Organizational Structures in the Solar Satellite Field

Science.gov (United States)

Edler, H. G.

1978-01-01

A literature survey, interviews with acknowledged experts in the fields of organizational entities, space, solar energy, and the SPS concept, and an analysis of these inputs to identify the organizational alternatives and make judgments as to their feasibility to serve as patterns for a future SPS entity are presented. Selection and evaluation criteria were determined to include timeliness, reliability, and adequacy to contribute meaningfully to the U.S. supply; political feasibility (both national and international) and cost-effectiveness (including environmental and other external costs). Based on these criteria, four organizational alternatives are discussed which offer reasonable promise as potential options for SPS. These included three domestic alternatives and one international alternative.

SHiP: a new multipurpose beam-dump experiment at the SPS.

CERN Document Server

AUTHOR|(SzGeCERN)387671

2016-01-01

SHiP is an experiment to look for very weakly interacting particles at a new to be constructed beam-dum p facility at the CERN SPS. The SHiP Technical Proposal has been submitted to the CERN SPS Committee in April 2015. The 400 GeV/c proton beam extracted from the SPS will be dumped on a heavy target with the aim of integ rating $2\\times 10^{20}$ proton on target in five years. A detector located downstream of the target, based on a long vacuum tank followed by a spectrometer and particle identification detectors, will allow probing a variety of models with light long-lived exotic particles and masses below a few GeV/c$^2$. The main focus will be the physics of the so-called Hidden Portals, i.e. search for Dark Photons, Light scalars and pseudo-scalars, and Heavy Neutral Leptons (HNL). The sensitivity to HNL will allow for the first time to probe, in the mass range between the kaon and the charm meson mass, a coupling range for which Baryogenesis and active neutrino masses could also be explained...

Ionizing radiation risks to Satellite Power Systems (SPS) workers in space

Energy Technology Data Exchange (ETDEWEB)

1980-12-01

A reference Satellite Power System (SPS) has been designed by NASA and its contractors for the purposes of evaluating the concept and carrying out assessments of the various consequences of development, including those on the health of the space workers. The Department of Energy has responsibility for directing various assessments. Present planning calls for the SPS workers to move from Earth to a low earth orbit (LEO) at an altitude of 500 kilometers; to travel by a transfer ellipse (TE) trajectory to a geosynchronous orbit (GEO) at an altitude of 36,000 kilometers; and to remain in GEO orbit for about 90 percent of the total time aloft. The radiation risks to the health of workers who will construct and maintain solar power satellites in the space environment are studied. The charge to the committee was: (a) to evaluate the radiation environment estimated for the Reference System which could represent a hazard; (b) to assess the possible somatic and genetic radiation hazards; and (c) to estimate the risks to the health of SPS workers due to space radiation exposure, and to make recommendations based on these conclusions. Details are presented. (WHK)

Bunch rotation tests at SPS flat top for the AWAKE experiment

CERN Document Server

Argyropoulos, T; Bohl, T; Esteban Müller, J F; Petrenko, A; Shaposhnikova, E; Timko, H

2013-01-01

This note summarises the results of two MDs on bunch rotation at SPS flat top. The first MD was carried out on 11th July 2012 with the Q26 optics, while the second MD on the 30th October 2012 used the Q20 optics. To obtain a short bunch length, which is important for the plasma wake-field acceleration project AWAKE, the bunches have been rotated in longitudinal phase space on the SPS flat top. The aim of the MDs was to obtain first estimates of what bunch length, intensity, and transverse emittances - which are crucial for the project - can be achieved for high-intensity single bunches.

Active site-directed alkylation of Na+-K+-ATPase by digitalis sulphonate derivatives of different lipophilicity.

Science.gov (United States)

Fricke, U.; Klaus, W.; Rogatti, M.

1981-01-01

1 Sulphonate derivatives of k-strophanthidin and digitoxigenin were tested as active site-directed labels of Na+-K+-adenosine triphosphatase (Na+-ATPase) from guinea-pig heart. 2 Lipophilicity ranged between P = 93 for strophanthidin-3-tosyloxy-acetate (STA) and P = 3028 for digitoxigenin-3-tosyloxy-acetate (DTA). 3 Although the alkylating moiety of STA and DTA was identical, the reversibility of Na+-K+-ATPase inhibition varied appreciably (82% and 35% respectively). 4 It is concluded that lipophilicity contributes considerably to the irreversible binding of alkylating cardiotonic steroids to myocardial Na+-K+-ATPase. PMID:6261865

Multiplicity fluctuations of identified hadrons in p+p interactions at SPS energies

CERN Document Server

Maćkowiak-Pawłowska, Maja

2014-01-01

Study of energy and system size fluctuations of identified hadrons is one of the key goals of NA61/SHINE at the CERN SPS. Results may allow to discover the critical point (CP) of strongly interacting matter as well as to uncover properties of the onset of deconfinement (OD). But fluctuations exhibit numerous other sources starting from most basic ones like volume effects and conservation laws. NA49 seems to observe fluctuations related to CP in collisions of medium size nuclei at top SPS energy. However, this result will remain inconclusive until systematic data on energy and system size dependence will be available. Moreover, fluctuations in p+p as well as in Pb+Pb interactions should be better understood. In this contribution results on multiplicity fluctuations of identified hadrons in p+p interactions at the CERN SPS energies will be presented. The NA61 data will be compared with the corresponding results from central Pb+Pb collisions of NA49 in the common acceptance region of both experiments. Moreover, ...

New Spill Control for the Slow Extraction in the Multi-Cycling SPS

CERN Document Server

Kain, Verena; Effinger, Ewald

2016-01-01

The flux of particles slow extracted with the 1/3 integer resonance from the Super Proton Synchrotron at CERN was previously controlled with a servo-spill feedback system which acted on the horizontal tune such as to keep the spill rate as constant as possible during the whole extraction time. The current in two servo-quadrupoles was modulated as a function of the difference between the measured and the desired spill rate. With servo quadrupoles at a single location in the SPS ring and the SPS in multi-cycling mode, the trajectory of the slow extracted beam was seen to change from cycle to cycle depending on the current applied by the servo feedback. Hence this system was replaced by a feed-forward tune correction using the main SPS quadrupoles. In this way the spill control can now be guaranteed without changing the trajectory of the extracted beam. This paper presents the algorithm and implementation in the control system and summarizes the advantages of the new approach. The obtained spill characteristics ...

A new SPS programme

CERN Document Server

Gazdzicki, Marek; Christakoglou, P.; Diakonos, F.; Panagiotou, A.D.; Petridis, A.; Vassiliou, M.; Cafagna, F.; Catanesi, M.G.; Montaruli, T.; Radicioni, E.; Rohrich, D.; Boldizsar, L.; Fodor, Z.; Laszlo, A.; Palla, G.; Szentpetery, I.; Vesztergombi, G.; Cleymans, J.; Brzychczyk, J.; Katrynska, N.; Karabowicz, R.; Majka, Z.; Planeta, R.; Staszel, P.; Baatar, B.; Kolesnikov, V.I.; Malakhov, A.I.; Melkumov, G.L.; Sissakian, A.N.; Sorin, Alexander Savelievich; Rauch, W.; Gazdzicki, M.; Lungwitz, B.; Mitrovski, M.; Renfordt, R.; Schuster, T.; Strabel, C.; Stroebele, H.; Blondel, A.; Bravar, A.; Di Marco, M.; Blumer, J.; Engel, R.; Haungs, A.; Meurer, C.; Roth, M.; Gazdzicki, M.; Korus, R.; Mrowczynski, St.; Rybczynski, M.; Seyboth, P.; Stefanek, G.; Wlodarczyk, Z.; Wojtaszek, A.; Guber, F.; Kurepin, A.; Ivashkin, A.; Maevskaya, A.; Andrieu, B.; Dumarchez, J.; Choi, K.-U.; Kim, J.-H.; Yi, J.-G.; Yoo, I.-K.; Kolev, D.; Tsenov, R.; Asryan, A.G.; Derkach, D.A.; Feofilov, G.A.; Igolkin, S.; Ivanov, A.S.; Kolevatov, R.S.; Kondratiev, V.P.; Naumenko, P.A.; Vechernin, V.V.; Chung, P.; Lacey, R.; Taranenko, A.; Kobayashi, T.; Nakadaira, T.; Sakashita, K.; Sekiguchi, T.; Grebieszkow, K.; Kikola, D.; Peryt, W.; Pluta, J.; Slodkowski, M.; Szuba, M.; Anticic, T.; Kadija, K.; Nikolic, V.; Susa, T.

2006-01-01

A new experiemntal program to study hadron production in hadron-nucleus and nucleus-nucleus collisions at the CERN SPS has been recently proposed by the NA49-future collaboration. The physics goals of the program are: (i) search for the critical point of strongly interacting matter and a study of the properties of the onset of deconfinemnt in nucleus-nucleus collisions, (ii) measurements of correlations, fluctuations and hadron spectra at high transverse momentum in proton-nucleus collisions needed as for better understanding of nucleus-nucleus results, (iii) measurements of hadron production in hadron-nucleus interactions needed for neutrino (T2K) and cosmic-ray (Pierre Auger Observatory and KASCADE) expriments. The physics of the nucleus-nucleus program is reviewed in this presentation.

Preliminary environmental assessment for the satellite power system (SPS)

Energy Technology Data Exchange (ETDEWEB)

1978-10-01

A preliminary assessment of the impact of the Satellite Power System (SPS) on the environment is presented. Information that has appeared in documents referenced herein is integrated and assimilated. The state-of-knowledge as perceived from recently completed DOE-sponsored studies is disclosed, and prospective research and study programs that can advance the state-of-knowledge and provide an expanded data base for use in an assessment planned for 1980 are defined. Alternatives for research that may be implemented in order to achieve this advancement are also discussed in order that a plan can be selected which will be consistent with the fiscal and time constraints on the SPS Environmental Assessment Program. Health and ecological effects of microwave radiation, nonmicrowave effects on health and the environment (terrestrial operations and space operations), effects on the atmosphere, and effects on communications systems are examined in detail. (WHK)

Aerial view of the CERN-Meyrin site during building work for the SPS

CERN Multimedia

1974-01-01

Visible on the right hand site are three building areas: in front the area around pit 6 of the SPS (where the ejection to the West Area branches off), in the middle the area around the 'civil engineering pit 7', and in the back the area around the SPS pit 1 where injection takes place. The SPS tunnel, 6910 m in length with an inner diameter of 4m in its cross section, is at an elevation of 400 m above sea level corresponding to a depth below the surface which varies between 23 and 65 m. It has 6 regularly spaced access pits. The further pit 7 is situated on the injection line about 200m from the injection point. It was used to extract material excavated from the ring and to bring in the precast elements and the concrete for lining the tunnel with a shell of about 30 cm thickness.

2002 Nonlinear Optics Measurements andModelling for the SPS at 26 GeV

CERN Document Server

Arduini, Gianluigi; Faus-Golfe, A; Iida, N; Tomás, R; CERN. Geneva. AB Department

2003-01-01

During SPS MDs in the summer of 2002, nonlinear chromaticity, coupling, amplitude-dependent detuning, resonance driving terms and phase advancesalong the ring were measured with a 72-bunch LHC batch at 26 GeV. Following the procedure developed in previous years, the SPS optics model has been updated, by adjusting the magnitude of sextupole and decapole components in the SPS dipole magnets and octupole components in the quadrupoles, respectively, to values which would be consistent with the measurements. We compare the field errors deduced in 2002, measuring over a larger momentum range, with those found in 2001 and 2000. We show that the resolution can be improved by averaging over the turn-by-turn beam position data from all BPMs, distributed around the ring, instead of using the single dedicated pick up of the tune meter. Computations by two different codes, MAD and SAD, indicate the sensitivity to matching algorithm and magnet representation. Finally, the tune shifts with transverse amplitude, the driving ...

Evaluation of strip-line pick-up system for the SPS wideband transverse feedback system

CERN Document Server

Kotzian, G; Steinhagen, R J; Valuch, D; Wehrle, U

2017-01-01

The proposed SPS Wideband Transverse Feedback sys- tem requires a wide-band pick-up system to be able to de- tect intra-bunch motion within the SPS proton bunches, captured and accelerated in a 200 MHz bucket. We present the electro-magnetic design of transverse beam position pick-up options optimised for installation in the SPS and evaluate their performance reach with respect to direct time domain sampling of the intra-bunch motion. The analy- sis also discusses the achieved subsystem responses of the associated cabling with new low dispersion smooth wall coaxial cables, wide-band generation of intensity and posi- tion signals by means of 180 degree RF hybrids as well as passive techniques to electronically suppress the beam off- set signal, needed to optimise the dynamic range and posi- tion resolution of the planned digital intra-bunch feedback system.

SPS Machine Protection Incident in 2009

CERN Document Server

Wenninger, J

2009-01-01

During the 008 SPS run a single machine operation incident happened on June 27th when a high intensity CNGS beam was lost in a dipole of sextant 1 following a time system ‘freeze’. The vacuum chamber was punctured over a length of over 10 cm, and the vacuum in the affected sector rose to atmospheric pressure. The dipole was exchanged June 30th. This note describes the incident in detail and presents the measures taken to avoid a similar incident in the future.

The SPS beam parameters, the operational cycle, and proton sharing with the SHiP facility

CERN Document Server

Arduini, Gianluigi; Gatignon, Lau; Cornelis, Karel

2015-01-01

The SHiP experiment aims at acquiring a total of 4×1019 protons on target per year. Based on demonstrated SPS performance for CNGS, the expected proton sharing between the TCC2 targets and SHiP is estimated taking into account the constraints in the super-cycle composition. We review the SPS beam parameters, the operational cycles taking into account the concurrent operation of the SPS as LHC injector and for the TCC2 experiments and the limitations on the maximum possible power dissipation and the expected sharing of the protons on target of the SHiP facility with the TCC2 targets. As a typical example this aim could be achieved while maintaining a duty cycle for the other fixed target experiments of about 18%.

The GCKIII Kinase Sps1 and the 14-3-3 Isoforms, Bmh1 and Bmh2, Cooperate to Ensure Proper Sporulation in Saccharomyces cerevisiae

Science.gov (United States)

Slubowski, Christian J.; Paulissen, Scott M.; Huang, Linda S.

2014-01-01

Sporulation in the budding yeast Saccharomyces cerevisiae is a developmental program initiated in response to nutritional deprivation. Sps1, a serine/threonine kinase, is required for sporulation, but relatively little is known about the molecular mechanisms through which it regulates this process. Here we show that SPS1 encodes a bona-fide member of the GCKIII subfamily of STE20 kinases, both through phylogenetic analysis of the kinase domain and examination of its C-terminal regulatory domain. Within the regulatory domain, we find Sps1 contains an invariant ExxxPG region conserved from plant to human GCKIIIs that we call the EPG motif; we show this EPG motif is important for SPS1 function. We also find that Sps1 is phosphorylated near its N-terminus on Threonine 12, and that this phosphorylation is required for the efficient production of spores. In Sps1, Threonine 12 lies within a 14-3-3 consensus binding sequence, and we show that the S. cerevisiae 14-3-3 proteins Bmh1 and Bmh2 bind Sps1 in a Threonine 12-dependent fashion. This interaction is significant, as BMH1 and BMH2 are required during sporulation and genetically interact with SPS1 in sporulating cells. Finally, we observe that Sps1, Bmh1 and Bmh2 are present in both the nucleus and cytoplasm during sporulation. We identify a nuclear localization sequence in Sps1 at amino acids 411–415, and show that this sequence is necessary and sufficient for nuclear localization. Taken together, these data identify regions within Sps1 critical for its function and indicate that SPS1 and 14-3-3s act together to promote proper sporulation in S. cerevisiae. PMID:25409301

Successful test of SPS-to-LHC beamline

CERN Multimedia

Maximilien Brice

2004-01-01

On 23 October there was great excitement in the Prevessin control room when, on the first attempt, a beam passed over 2.5 km down the new SPS-to-LHC transfer line, TI8, to within a few metres of the LHC tunnel. Members of the AB, AT and TS departments involved in the beamline and its test, celebrate their success with the Director General, Robert Aymar, and the LHC Project Leader, Lyn Evans.

Successful test of SPS-to-LHC beamline

CERN Multimedia

2004-01-01

On 23 October there was great excitement in the Prevessin control room when, on the first attempt, a beam passed over 2.5 km down the new SPS-to-LHC transfer line, TI8, to within a few metres of the LHC tunnel. Above: members of the AB, AT and TS departments involved in the beamline and its test, celebrate their success with the Director General, Robert Aymar, and the LHC Project Leader, Lyn Evans.

Electronic properties of junctions between aluminium and polyaniline doped with dodecylbenzene sulphonate

International Nuclear Information System (INIS)

Bantikassegn, W.

1997-07-01

Polyaniline (PANI) doped with dodecylbenzene sulphonate (DBS) anions forms a conducting organic sold. Aluminium contacts to PANI (DBS) polymer are studied using complex impedance spectroscopy and current-voltage characteristics measurements. The I-V characteristic is asymmetric and non-ohmic and shows rectification. The complex impedance spectra show two practically overlapping semi-circles which reveal the existence of two distinct regions at the metal/doped polymer interface. They are modelled by an equivalent circuit consisting of two parallel RC circuits in series representing a thin interfacial insulating (S') layer and a depletion (S) region. The device is therefore an MS'S type, where S' and S are the same chemical compounds in which the S' layer has very low doping content than the S layer. (author). 32 refs, 2 figs, 1 tab

Arrival of the Robbins machine in LSS1 after completing the boring of the SPS tunnel.

CERN Multimedia

CERN PhotoLab

1974-01-01

A few months after the signature of the agreement giving the go-ahead for the expansion of CERN into French territory (see Bulletin no.24/2004), work began on the Super Proton Synchrotron (SPS). Two years later, on 31 July 1974, the Robbins tunnel-boring machine excavating the SPS tunnel returned to its starting point (see photograph). It had excavated a tunnel with a circumference of 7 kilometres, at an average depth of 40 metres below the surface. The tunnel straddled the Franco-Swiss border, making the SPS the first cross-border accelerator. More than a thousand magnets were needed to equip the ring. The civil engineering and installation work was completed in record time after only four years. The SPS was equipped with a control system which was ahead of its time, consisting of 24 small control computers distributed in the tunnel and the control room and communicating by means of a high-rate data transmission system. The main control room housed only four consoles as opposed to the banks of electronic eq...

Operation of the transverse feedback system at the CERN SPS

International Nuclear Information System (INIS)

Bossart, R.; Louwerse, R.; Mourier, J.; Vos, L.

1987-01-01

To prevent transverse instabilities at high beam intensity in the SPS, the transverse feedback system for damping the betatron oscillations has been upgraded for larger damping decrements and for increased system's bandwidth. The feedback loop now contains a digital delay line cancellor, so that the damper works with a velocity feedback Δx/Δt, unaffected by the closed orbit position x at the pick-up station. The digital processing of the feedback signal facilitates nonlinear feedback techniques such as antidamping and ''band-bang'' feedback. The ''bang-bang'' feedback provides the maximum possible damping rate of the injection oscillations in the SPS-collider, in order to minimize the emittance increase caused by filamentation. The antidamping nonlinearity provides small continuous beam oscillations of 50 μm amplitude for tracking the machine tune Q with a phase locked loop

Successful beam test of the SPS-to-LHC transfer line TI2

CERN Multimedia

2007-01-01

Image of the first beam spot on the last BTV screen traversed by the beam during the TI 2 test.At 12:03:47 on 28 October a beam passed down the 2.7 km of the new SPS-to-LHC transfer line TI 2 at the first attempt, to within some 50 m of the LHC tunnel. After initial tuning, a range of measurements was carried out with a low intensity proton beam and preliminary analyses look good. After the test, no increase in radiation levels was found in either the LHC or ALICE, and the zones were rapidly opened again for access. As from next year TI 2 will regularly transport a beam from the SPS to the LHC injection point of Ring 1, near Point 2 (ALICE). The TI 8 transfer line, which will bring particles from the SPS to the injection point in Ring 2, near Point 8 (LHCb), was commissioned successfully with low intensity beam in 2004. The two LHC injection lines have a combined length of 5.6 km and comprise some seven hundred warm magnets. While a...

NA61/SHINE low energy program at SPS

CERN Document Server

Abgrall, N.; Andrieu, B.; Anticic, T.; Antoniou, N.; Argyriades, J.; Asryan, A.G.; Baatar, B.; Blondel, A.; Blumer, J.; Boldizsar, L.; Bravar, A.; Brzychczyk, J.; Bubak, A.; Bunyatov, S.A.; Choi, K.-U.; Christakoglou, P.; Chung, P.; Cleymans, J.; Derkach, D.A.; Diakonos, F.; Dominik, W.; Dumarchez, J.; Engel, R.; Ereditato, A.; Feofilov, G.A.; Fodor, Z.; Ferrero, A.; Gazdzicki, M.; Golubeva, M.; Grebieszkow, K.; Grzeszczuk, A.; Guber, F.; Hasegawa, T.; Haungs, A.; Igolkin, S.; Ivanov, A.S.; Ivashkin, A.; Kadija, K.; Katrynska, N.; Kielczewska, D.; Kikola, D.; Kisiel, J.; Kobayashi, T.; Kolesnikov, V.I.; Kolev, D.; Kolevatov, R.S.; Kondratiev, V.P.; Kowalski, S.; Kurepin, A.; Lacey, R.; Laszlo, A.; Lyubushkin, V.V.; Majka, Z.; Malakhov, A.I.; Marchionni, A.; Marcinek, A.; Maris, I.; Matveev, V.; Melkumov, G.L.; Meregaglia, A.; Messina, M.; Mijakowski, P.; Mitrovski, M.; Montaruli, T.; Mrowczynski, St.; Murphy, S.; Nakadaira, T.; Naumenko, P.A.; Nikolic, V.; Nishikawa, K.; Palczewski, T.; Palla, G.; Panagiotou, A.D.; Peryt, W.; Planeta, R.; Pluta, J.; Popov, B.A.; Posiadala, M.; Przewlocki, P.; Rauch, W.; Ravonel, M.; Renfordt, R.; Rohrich, D.; Rondio, E.; Rossi, B.; Roth, M.; Rubbia, A.; Rybczynski, M.; Sadovsky, A.; Sakashita, K.; Schuster, T.; Sekiguchi, T.; Seyboth, P.; Shibata, M.; Sissakian, A.N.; Skrzypczak, E.; Slodkowski, M.; Sorin, A.S.; Staszel, P.; Stefanek, G.; Stepaniak, J.; Strabel, C.; Stroebele, H.; Susa, T.; Szentpetery, I.; Szuba, M.; Tada, M.; Taranenko, A.; Tsenov, R.; Ulrich, R.; Unger, M.; Vassiliou, M.; Vechernin, V.V.; Vesztergombi, G.; Wlodarczyk, Z.; Wojtaszek, A.; Zipper, W.

2009-01-01

Status of the new experimental program to study hadron production in hadron-nucleus and nucleus-nucleus collisions at the CERN SPS will be presented. A physics motivation will be given for the part of the program related to the physics of strongly interacting matter. Upgrades of the NA61 experimental set-up and data taking plans will be described in detail.

Immobilization of Bacillus sp. in mesoporous activated carbon for degradation of sulphonated phenolic compound in wastewater.

Science.gov (United States)

Sekaran, G; Karthikeyan, S; Gupta, V K; Boopathy, R; Maharaja, P

2013-03-01

Xenobiotic compounds are used in considerable quantities in leather industries besides natural organic and inorganic compounds. These compounds resist biological degradation and thus they remain in the treated wastewater in the unaltered molecular configurations. Immobilization of organisms in carrier matrices protects them from shock load application and from the toxicity of chemicals in bulk liquid phase. Mesoporous activated carbon (MAC) has been considered in the present study as the carrier matrix for the immobilization of Bacillus sp. isolated from Effluent Treatment Plant (ETP) employed for the treatment of wastewater containing sulphonated phenolic (SP) compounds. Temperature, pH, concentration, particle size and mass of MAC were observed to influence the immobilization behavior of Bacillus sp. The percentage immobilization of Bacillus sp. was the maximum at pH 7.0, temperature 20 °C and at particle size 300 μm. Enthalpy, free energy and entropy of immobilization were -46.9 kJ mol(-1), -1.19 kJ mol(-1) and -161.36 JK(-1)mol(-1) respectively at pH 7.0, temperature 20 °C and particle size 300 μm. Higher values of ΔH(0) indicate the firm bonding of the Bacillus sp. in MAC. Degradation of aqueous sulphonated phenolic compound by Bacillus sp. immobilized in MAC followed pseudo first order rate kinetics with rate constant 1.12 × 10(-2) min(-1). Copyright © 2012 Elsevier B.V. All rights reserved.

Antibacterial surfaces by adsorptive binding of polyvinyl-sulphonate-stabilized silver nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Vasilev, Krasimir; Sah, Vasu R; Goreham, Renee V; Short, Robert D [Mawson Institute, University of South Australia, Mawson Lakes Campus, Mawson Lakes, Adelaide, SA 5095 (Australia); Ndi, Chi; Griesser, Hans J, E-mail: Krasimir.vasilev@unisa.edu.au [Ian Wark Research Institute, University of South Australia, Mawson Lakes, Adelaide, SA 5095 (Australia)

2010-05-28

This paper presents a novel and facile method for the generation of efficient antibacterial coatings which can be applied to practically any type of substrate. Silver nanoparticles were stabilized with an adsorbed surface layer of polyvinyl sulphonate (PVS). This steric layer provided excellent colloidal stability, preventing aggregation over periods of months. PVS-coated silver nanoparticles were bound onto amine-containing surfaces, here produced by deposition of an allylamine plasma polymer thin film onto various substrates. SEM imaging showed no aggregation upon surface binding of the nanoparticles; they were well dispersed on amine surfaces. Such nanoparticle-coated surfaces were found to be effective in preventing attachment of Staphylococcus epidermidis bacteria and also in preventing biofilm formation. Combined with the ability of plasma polymerization to apply the thin polymeric binding layer onto a wide range of materials, this method appears promising for the fabrication of a wide range of infection-resistant biomedical devices.

Moessbauer spectroscopic study of Fe{sup II}-doped sulphonated poly(ether-urethane)-styrene-acrylate copolymer

Energy Technology Data Exchange (ETDEWEB)

Kamnev, A. A. [Russian Academy of Sciences, Institute of Biochemistry and Physiology of Plants and Microorganisms (Russian Federation); Grigoryeva, O. P.; Fainleib, A. M. [National Academy of Sciences of Ukraine, Institute of Macromolecular Chemistry (Ukraine); Kuzmann, E., E-mail: kuzmann@ludens.elte.hu [Eoetvoes Lorand University, Institute of Chemistry (Hungary)

2013-04-15

Thermoplastic linear ionomer based on sulphonated poly(ether-urethane)-styrene-acrylate copolymer, doped with natural Fe{sup 2 + }, was studied by Moessbauer spectroscopy at T = 78 and 290 K to monitor the chemical state of Fe species. The Fe{sup 2 + } added to aqueous suspension of the system was only partly oxidised in the course of polymer film preparation and drying in air. The oxidised part comprised a magnetic phase ({approx}19 % of total Fe both at T = 78 and 298 K) and a quadrupole doublet ({approx}40 %), while Fe{sup II} (over 40 %) stabilised in two types of microenvironments.

Vancomycin-resistant Enterococcus faecium bacteraemia as a complication of Kayexalate (sodium polystyrene sulfonate, SPS) in sorbitol-induced ischaemic colitis.

Science.gov (United States)

Cerrud-Rodriguez, Roberto Christian; Alcaraz-Alvarez, Diego; Chiong, Brian Bobby; Ahmed, Abdurhman

2017-11-09

We present the case report of an 80-year-old woman with chronic kidney disease stage G5 admitted to the hospital with fluid overload and hyperkalaemia. Sodium polystyrene sulfonate (SPS, Kayexalate) in sorbitol suspension was given orally to treat her hyperkalaemia, which precipitated an episode of SPS in sorbitol-induced ischaemic colitis with the subsequent complication of vancomycin-resistant Enterococcus (VRE) bacteraemia. SPS (Kayexalate) in sorbitol suspension has been implicated in the development of intestinal necrosis. Sorbitol, which is added as a cathartic agent to decrease the chance of faecal impaction, may be primarily responsible through several proposed mechanisms. The gold standard of diagnosis is the presence of SPS crystals in the colon biopsy. On a MEDLINE search, no previous reports of a VRE bacteraemia as a complication of biopsy-confirmed SPS in sorbitol ischaemic colitis were found. To the best of our knowledge, ours would be the first such case ever reported. © BMJ Publishing Group Ltd (unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Heavy Ion Physics at the CERN SPS: Roots 1974-1984 and Key Results

CERN Multimedia

CERN. Geneva

2014-01-01

Two communities, Nuclear and Particle Physics, had to come together to open up a new field at the CERN SPS in the early eighties, bringing CERN to the forefront worldwide until the start of RHIC in 2000. I will discuss the period before that, including the basic new ideas on parton deconfinement, key workshops, alternative accelerator options in the LBL-GSI-CERN triangle, and the final convergence of the three labs on the SPS, sacrificing any home future in this field for the first two. In 1984, 5 major experiments were approved for initially O16 and S32 beams at the SPS, with an unprecedented reuse of existing experimental equipment. Subsequent evolution followed thanks to intense learning processes, leading to a second generation of much improved or completely new experiments together with Pb beams starting in 1994. I will summarise the key results and their (then still cautious) interpretation as of 2000. They were used as an input to a Press Conference at CERN, announcing the detection of a 'n...

SPS ionosphere/microwave beam interactions: Arecibo experimental studies

International Nuclear Information System (INIS)

Duncan, L.M.

1980-10-01

The purpose of this program is to determine the environmental impacts associated with the operation of the proposed SPS microwave power transmission system. It is expected that thermal effects will provide the dominant force driving the nonlinear ionosphere/microwave beam interactions. Collisional damping of radio waves, producing ohmic heating of the ionospheric plasma, depends inversely on the square of the radio wave frequency. Therefore, equivalent heating and equivalent thermal forces can be generated at lower radiated power densities by using lower radio wave frequencies. This principle is fundamental to a large part of the experimental program. An understanding of the physics of the specific interactions excited by the SPS microwave beam is also an important part of the assessment program. This program is designed to determine instability thresholds, the growth rates and spatial extent of the resultant ionospheric disturbances, and the frequency and power dependences of the interactions. How these interactions are affected by variations in the natural ionospheric conditions, how different instabilities occurring simultaneously may affect each other, and how distinct microwave beams might mutually interact are studied. Status of the program is described

Chronic toxicity of sediment-associated linear alkylbenzene sulphonates (LAS) to freshwater benthic organisms

Energy Technology Data Exchange (ETDEWEB)

Comber, S.D.W. [WRc-NSF, Henley Road, Medmenham, Marlow, Buckinghamshire, SL7 2HD (United Kingdom)]. E-mail: sean.comber@atkinsglobal.com; Conrad, A.U. [Weinberg Group, Blue Tower, Box 16, B-1050 Brussels (Belgium); Hoess, S. [ECOSSA, Thierschstrasser 43, 80538, Muenchen (Germany); Webb, S. [CEFIC, Ave E. Van Nieuwenhuyse 4, B-1160 Brussels (Belgium); Marshall, S. [Unilever Research, Environment Centre, Bebington, Wirral, Merseyside, L63 3JW (United Kingdom)

2006-11-15

The toxicity of linear alkylbenzene sulphonates (LAS), to freshwater benthic organisms was assessed during exposure to spiked sediment. Lethal and sub-lethal end-points were monitored for two organisms (oligochaete Lumbriculus variegatus and nematode Caenorhabditis elegans). Results demonstrated relatively low toxicity (LOECs >100 mg/kg dry weight). No observed effect concentrations (NOECs) of 81 mg/kg dw (Lumbriculus) and 100 mg/kg dw (Caenorhabditis) were determined. For the oligochaete, no specific endpoint was particularly sensitive to LAS. For the nematode, egg production was the most sensitive endpoint. Significant degradation was measured over the 28-day duration of the Lumbriculus study, equating to a half-life of 20 days in sediment. - This paper provides sediment toxicity data for LAS, essential for a detailed and accurate environment risk assessment.

Chronic toxicity of sediment-associated linear alkylbenzene sulphonates (LAS) to freshwater benthic organisms

International Nuclear Information System (INIS)

Comber, S.D.W.; Conrad, A.U.; Hoess, S.; Webb, S.; Marshall, S.

2006-01-01

The toxicity of linear alkylbenzene sulphonates (LAS), to freshwater benthic organisms was assessed during exposure to spiked sediment. Lethal and sub-lethal end-points were monitored for two organisms (oligochaete Lumbriculus variegatus and nematode Caenorhabditis elegans). Results demonstrated relatively low toxicity (LOECs >100 mg/kg dry weight). No observed effect concentrations (NOECs) of 81 mg/kg dw (Lumbriculus) and 100 mg/kg dw (Caenorhabditis) were determined. For the oligochaete, no specific endpoint was particularly sensitive to LAS. For the nematode, egg production was the most sensitive endpoint. Significant degradation was measured over the 28-day duration of the Lumbriculus study, equating to a half-life of 20 days in sediment. - This paper provides sediment toxicity data for LAS, essential for a detailed and accurate environment risk assessment

The 938 MHz resonant damping loops for the 200 MHz SPS travelling wave cavities

CERN Document Server

Caspers, F

2012-01-01

Measurements of the beam stability in the SPS in 1982 - 1983 have shown a transversal instability for high intensity beams [1]. The fact that this related technical note is published nearly 30 years later, is related to the revival of interest in the frame of SPS impedance evaluation for LS1. Until now there was just a barely known paper folder available which could be consulted on request. The instability mentioned above was identified from beam measurements as raised by a deflecting mode at approximately 940 MHz in the 200 MHz travelling wave cavities of the SPS. Estimates showed that an attenuation of this particular mode by 20 dB would be desirable. In order to achieve this attenuation some vacuum ports on top of the cavities were available. For the damping devices three requirements had to be met: - sufficient damping at about 940 MHz - no serious change of cavity input VSWR at 200 MHz - no water cooling requirement for this higher order mode coupler.

Mechanical characterization of cemented carbide WC-6Co (%wt) manufactured by SPS (Spark Plasma Sintering

International Nuclear Information System (INIS)

Boidi, G.; Tertuliano, A.J.; Machado, I.F.

2016-01-01

This work aimed to manufacture cemented carbide (WC-6%wtCo) obtained by SPS (Spark Plasma Sintering) process and to carry out the mechanical characterization by hardness and fracture toughness. The material was consolidated at 1100 deg C for different holding times (1 min, 5 min, 10 min), in order to evaluate the densification. A reference sample was also used to be compared to SPS. Optical and scanning electron microscopy were carried out to characterize the microstructural features of the samples and mechanical properties were obtained by hardness measurements (micro and macro) and instrumented indentation. The fracture toughness was calculated with the method of Palmqvist. Best results were found in the material sintered by SPS for 10 minutes of holding time, in which 97% of relative density and about 1600 HV_1_0 was reached. (author)

Shallow gas incident in 3-ELPS-15D-SPS well; Incidente com shallow gas no poco 3-ELPS-15D-SPS

Energy Technology Data Exchange (ETDEWEB)

Ribeiro, Rubens Fausto [Agencia Nacional do Petroleo, Gas Natural e Biocombustiveis (ANP), Rio de Janeiro, RJ (Brazil)

2004-07-01

One of the concerns during the planning phase of an exploratory offshore well drilling is the possibility of occurrence of a shallow gas accumulation. In spite of being a rare event, taking into account that an event like this can have disastrous consequences, the cares to work with that type of incident cannot be despised. As example, in 2003, during the operations in the extension well 3-ELPS-15D-SPS, it happened the uncontrolled influx of water and gas to the bottom of the sea: the annular space between the 30'' and 13 3/8'' casings was not filled out with cement, allowing the flow from a shallow permeable interval to the bottom of the sea through the wellhead's cement return orifices, generating the need of an corrective action to make the abandonment of the well in accordance with the Regulation of Abandonment of Wells existent in Brazil. This work presents the mechanical conditions of the interval close to the wet wellhead of the 3-ELPS-15D-SPS, enumerating the sequence of operations accomplished to solve the problem. (author)

High density matter in AGS, SPS and RHIC collisions. Proceedings. Volume 9

International Nuclear Information System (INIS)

1998-01-01

This 1-day workshop focused on phenomenological models regarding the specific question of the maximum energy density achievable in collisions at AGS, SPS and RHIC. The idea was to have 30-minute (or less) presentations of each model--but not the model as a whole, rather then that strongly narrowed to the above physics question. The key topics addressed were: (1) to estimate the energy density in heavy-ion collisions within a model, and to discuss its physical implications; (2) to suggest experimental observables that may confirm the correctness of a model approach--with respect to the energy density estimate; (3) to compare with existing data from AGS and SPS heavy-ion collisions, and to give predictions for the future RHIC experiments. G. Ogilvie started up the workshop with a critical summary of experimental manifestations of high-density matter at the AGS, and gave a personal outlook on RHIC physics. R. Mattiello talked about his newly developed hadron cascade model for applications to AGS and SPS collisions. Next, D. Kharzeev gave a nice introduction of the Glauber approach to high-energy collisions and illustrated the predictive power of this approach in nucleus-nucleus collisions at the SPS. It followed S. Vance with a presentation of the baryon-junction model to explain the observed baryon stopping phenomenon in collisions of heavy nuclei. S. Bass continued with a broad perspective of the UrQMD model, and provided insight into the details of the microscopic dynamical features of nuclear collisions at high energy. J. Sandweiss and J. Kapusta addressed the interesting aspect of photon production in peripherical nuclear collisions due to intense electromagnetic bremstrahlung by the highly charged, fast moving ions. Finally, H. Sorge closed up the one-day workshop with a presentation of his recent work with the RQMD model. This report consists of a summary and vugraphs of the presentations

High density matter in AGS, SPS and RHIC collisions: Proceedings. Volume 9

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-01

This 1-day workshop focused on phenomenological models regarding the specific question of the maximum energy density achievable in collisions at AGS, SPS and RHIC. The idea was to have 30-minute (or less) presentations of each model--but not the model as a whole, rather then that strongly narrowed to the above physics question. The key topics addressed were: (1) to estimate the energy density in heavy-ion collisions within a model, and to discuss its physical implications; (2) to suggest experimental observables that may confirm the correctness of a model approach--with respect to the energy density estimate; (3) to compare with existing data from AGS and SPS heavy-ion collisions, and to give predictions for the future RHIC experiments. G. Ogilvie started up the workshop with a critical summary of experimental manifestations of high-density matter at the AGS, and gave a personal outlook on RHIC physics. R. Mattiello talked about his newly developed hadron cascade model for applications to AGS and SPS collisions. Next, D. Kharzeev gave a nice introduction of the Glauber approach to high-energy collisions and illustrated the predictive power of this approach in nucleus-nucleus collisions at the SPS. It followed S. Vance with a presentation of the baryon-junction model to explain the observed baryon stopping phenomenon in collisions of heavy nuclei. S. Bass continued with a broad perspective of the UrQMD model, and provided insight into the details of the microscopic dynamical features of nuclear collisions at high energy. J. Sandweiss and J. Kapusta addressed the interesting aspect of photon production in peripherical nuclear collisions due to intense electromagnetic bremstrahlung by the highly charged, fast moving ions. Finally, H. Sorge closed up the one-day workshop with a presentation of his recent work with the RQMD model. This report consists of a summary and vugraphs of the presentations.

Graphenated tantalum(IV) oxide and poly(4-styrene sulphonic acid)-doped polyaniline nanocomposite as cathode material in an electrochemical capacitor

International Nuclear Information System (INIS)

Njomo, Njagi; Waryo, Tesfaye; Masikini, Milua; Ikpo, Chinwe O.; Mailu, Stephen; Tovide, Oluwakemi; Ross, Natasha; Williams, Avril; Matinise, Nolubabalo; Sunday, Christopher E.; Mayedwa, Noluthando; Baker, Priscilla G.L.; Ozoemena, Kenneth I.; Iwuoha, Emmanuel I.

2014-01-01

Nanostructured poly(4-styrene sulphonic acid) and tantalum (IV) oxide-doped polyaniline nanocomposite were synthesised and their electro-conductive properties were determined. The oxide was synthesized using a modified sol-gel method and then dispersed in acidic media through sonication and entrapped in-situ into the polymeric matrix during the oxidative chemical polymerization of aniline doped with poly(4-styrene sulphonic acid). The oxides and novel polymeric nanocomposite were characterised with TEM, SEM, EDX, XRD, FTIR, UV-visible to ascertain elemental and phase composition, successful polymerization, doping, morphology and entrapment of the metal oxide nanoparticles. The electro-conductivity of the nanomaterial was interrogated using scanning electrochemical microscopy (SECM) and cyclic voltammetry (CV). The material was then anchored on activated graphitic carbon and used in the design of an asymmetric supercapacitor cell using 6 M KOH aqueous electrolyte. Characteristically high specific capacitance values of 318.4 F/g with a corresponding energy and power densities of 1.57 kWh/kg and 0.435 kW/kg, respectively, were demonstrated. The cell also showed high coulombic efficiency of 94.9% with a long cycle life and good cycle stability making the nanomaterial suitable for constructing supercapacitor cell electrodes

Highly selective adsorption of organic dyes containing sulphonic groups using Cu{sub 2}(OH){sub 3}NO{sub 3} nanosheets

Energy Technology Data Exchange (ETDEWEB)

Jia, Jincan; Wang, Honghong; Niu, Helin, E-mail: niuhelin@ahu.edu.cn; Chen, Jingshuai; Song, Jiming; Mao, Changjie; Zhang, Shengyi [Anhui University, College of Chemistry and Chemical Engineering (China); Gao, Yuanhao [Xuchang University, Institute of Surface Micro and Nano Materials (China); Chen, Changle [University of Science and Technology of China, CAS Key Laboratory of Soft Matter Chemistry (China)

2016-09-15

In this study, we report a facile approach to synthesize Cu{sub 2}(OH){sub 3}NO{sub 3} nanosheets via simply sonochemical method, which showed high efficiency and selectivity towards the adsorption of organic dyes containing sulphonic groups. The structure and morphology of the nanosheets were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, N{sub 2} adsorption–desorption isotherms, particle size and zeta potential analysis. The adsorption results indicated that the equilibrium data coincide very well with Langmuir isotherm, and the maximum adsorption capacities for Congo red, methyl blue and methyl orange were 1864, 1270 and 959 mg g{sup −1}, respectively. The kinetic data can be explained by pseudo-second-order model. The Cu{sub 2}(OH){sub 3}NO{sub 3} nanosheets also demonstrated high selectivity towards the adsorption of dyes containing sulphonic groups from mixed dye solutions. The rational mechanism of adsorption was attributed to hydrogen bonding, electrostatic attractions and ion exchanges between the dye molecules and Cu{sub 2}(OH){sub 3}NO{sub 3} in the adsorption process.

Satellite Power Systems (SPS) concept definition study. Volume 2, part 2: System engineering. [cost and programmatics

Science.gov (United States)

Hanley, G. M.

1980-01-01

The latest technical and programmatic developments are considered as well as expansions of the Rockwell SPS cost model covering each phase of the program through the year 2030. Comparative cost/economic analyses cover elements of the satellite, construction system, space transportation vehicles and operations, and the ground receiving station. System plans to define time phased costs and planning requirements that support major milestones through the year 2000. A special analysis is included on natural resources required to build the SPS reference configuration. An appendix contains the SPS Work Breakdown Structure and dictionary along with detail cost data sheet on each system and main element of the program. Over 200 line items address DDT&E, theoretical first unit, investment cost per satellite, and operations charges for replacement capital and normal operations and maintenance costs.

Incident energy dependence of collision dynamics in A+A reactions from AGS to SPS

International Nuclear Information System (INIS)

Nara, Yasushi

2000-01-01

Based on the hadronic transport model of JAM, I calculate the time evolution of particles, density, temperature and energy density for the heavy ion collision at the incident energies of AGS(11A GeV), JHF(25A GeV) and SPS(158A GeV). Microscopic calculations show that resonance matter with extremely large baryon density is created at AGS energy, while at JHF energy, quark matter with extremely large baryon density is suggested. At SPS energy, quark matter with large baryon density might be created. (author)

Fluorescence resonance energy transfer: A promising tool for investigation of the interaction between 1-anthracene sulphonate and serum albumins

International Nuclear Information System (INIS)

Banerjee, Paltu; Ghosh, Saptaparni; Sarkar, Arindam; Bhattacharya, Subhash Chandra

2011-01-01

This present investigation has revealed that steady state as well as time-resolved fluorescence techniques can serve as highly sensitive monitors for exploring the interaction of fluorescent probe 1-anthracene sulphonate (1-AS) with model transport proteins, bovine serum albumin (BSA) and human serum albumin (HSA).We have focused on fluorescence resonance energy transfer (FRET) between excited tryptophan in transport proteins to 1-AS, for the study of relaxation dynamics of biological molecules.

Removing Known SPS Intensity Limitations for High Luminosity LHC Goals

CERN Document Server

Shaposhnikova, Elena; Bohl, Thomas; Cruikshank, Paul; Goddard, Brennan; Kaltenbacher, Thomas; Lasheen, Alexandre; Perez Espinos, Jaime; Repond, Joël; Salvant, Benoit; Vollinger, Christine

2016-01-01

In preparation of the SPS as an LHC injector its impedance was significantly reduced in 1999 - 2000. A new SPS impedance reduction campaign is planned now for the High Luminosity (HL)-LHC project, which requires bunch intensities twice as high as the nominal one. One of the known intensity limitations is a longitudinal multi-bunch instability with a threshold 3 times below this operational intensity. The instability is presently cured using the 4th harmonic RF system and controlled emittance blow-up, but reaching the HL-LHC parameters cannot be assured without improving the machine impedance. Recently the impedance sources responsible for this instability were identified and implementation of their shielding and damping is foreseen during the next long shutdown (2019 - 2020) in synergy with two other important upgrades: amorphous carbon coating of (part of) the vacuum chamber against the e-cloud effect and rearrangement of the 200 MHz RF system. In this paper the strategy of impedance reduction is presented t...

Structural elucidation and physicochemical properties of an organic NLO crystal: 4-Nitrotoluene-2-sulphonic acid dihydrate

Science.gov (United States)

Sangeetha, K.; Guru Prasad, L.; Mathammal, R.

2018-03-01

4-nitrotoluene-2-sulphonic acid dihydrate single crystals have been developed using slow evaporation technique in methanol. Lattice parameters of the NTSAD crystal have been calculated and it confirms the grown material. The intermolecular interactions are studied from the 3D Hirshfeld surface analysis and 2D fingerprint plots. The NMR spectral analysis has been carried out to confirm the molecular structure of the grown material. Optical properties have been obtained from UV-VIS spectral analysis and photoluminescence studies. Frequency conversion property of the NTSAD crystal was investigated with the aid of Kurtz and Perry method.

What have we learned and want to learn from heavy ion collisions at CERN SPS?

International Nuclear Information System (INIS)

Shuryak, E.V.

1999-01-01

The talk is a mini-review of current status of the field, with emphasis on SPS heavy ion program, now and beyond 2000 (as asked by the organizers). The main question is, of course, whether we can convince ourselves and community at large that the QGP is in fact produced at SPS. We came a long way toward the positive answer, and are definitely on strongly rising part of the learning curve. Still, in few key directions we lack important pieces of evidences

Simulation of E-Cloud Driven Instability And Its Attenuation Using a Feedback System in the CERN SPS

International Nuclear Information System (INIS)

Vay, Jean-Luc

2012-01-01

Electron clouds have been shown to trigger fast growing instabilities on proton beams circulating in the SPS, and a feedback system to control the instabilities is under active development. We present the latest improvements to the Warp-Posinst simulation framework and feedback model, and its application to the self-consistent simulations of two consecutive bunches interacting with an electron cloud in the SPS.

Na61/Shine at the CERN SPS

CERN Document Server

Laszlo, Andras; Aduszkiewicz, A; Andrieu, B; Anticic, T; Antoniou, N; Asryan, A G; Baatar, B; Blondel, A; Blumer, J; Boldizsar, L; Bravar, A; Brzychczyk, J; Bunyatov, S A; Cafagna, F; Catanesi, M G; Choi, K U; Christakoglou, P; Chung, P; Cleymans, J; Derkach, D A; Diakonos, F; Dominik, Wojciech; Dumarchez, J; Engel, R; Ereditato, A; Feofilov, G A; Fodor, Z; Gazdzicki, M; Golubeva, M; Grebieszkow, K; Guber, F; Haungs, A; Hess, M; Igolkin, S; Ivanov, A S; Ivashkin, A; Kadija, K; Karabowicz, R; Katrynska, N; Kielczewska, D; Kikola, D; Kim, J H; Kobayashi, T; Kolesnikov, V I; Kolev, D; Kolevatov, R S; Kondratiev, V P; Kurepin, A; Lacey, R; Lehmann, S; Lungwitz, B; Lyubushkin, V V; Maevskaya, A; Majka, Z; Malakhov, A I; Marchionni, A; Di Marco, M; Matveev, V; Melkumov, G L; Meregaglia, A; Messina, M; Meurer, C; Mijakowski, P; Mitrovski, M; Montaruli, T; Mrówczynski, S; Murphy, S; Nakadaira, T; Naumenko, P A; Nikolic, V; Palczewski, T; Pálla, G; Panagiotou, A D; Peryt, W; Petridis, A; Planeta, R; Pluta, J; Popov, B A; Posiadala, M; Przewlocki, P; Radicioni, E; Rauch, W; Renfordt, R; Röhrich, D; Rondio, E; Rossi, B; Roth, M; Rubbia, André; Rybczynski, M; Sadovskii, A; Sakashita, K; Schuster, T; Sekiguchi, T; Seyboth, P; Shileev, K; Sissakian, A N; Skrzypczak, E; Slodkowski, M; Sorin, A S; Staszel, P; Stefanek, G; Stepaniak, J; Strabel, C; Ströbele, H; Susa, T; Szentpétery, I; Szuba, M; Taranenko, A; Tsenov, R; Unger, M; Vassiliou, M; Vechernin, V V; Vesztergombi, G; Wlodarczyk, Z; Wojtaszek, A; Yi, J G; Yoo, I K

2007-01-01

Status of the new experimental program to study hadron production in hadron-nucleus and nucleus-nucleus collisions at the CERN SPS will be presented. In particular, a detailed physics motivation and experimental strategy will be given for the part of the program related to the physics of strongly interacting matter: search for the critical point of strongly interacting matter, study properties of the onset of deconfinement, and high p_T measurements in p+p and p+A interactions. The planned measurements for the neutrino T2K and cosmic-ray experiments will also be discussed.

Inhibition of corrosion of carbon steel by heptane sulphonic acid – Zn2+ system

Directory of Open Access Journals (Sweden)

C. MARY ANBARAS

2012-03-01

Full Text Available Corrosion inhibition of carbon steel in dam water by sodium heptane sulphonate (SHS and zinc ion system was investigated using weight loss and potentiodynamic polarization methods. Results of weight loss method indicated that inhibition efficiency (IE increased as the inhibitor concentration increased. A synergistic effect existed between SHS and Zn2+. The influence of sodium potassium tartrate (SPT on the IE of the SHS-Zn2+ system was evaluated. As the immersion period increased, the IE decreased. Polarization study revealed that SHS-Zn2+ system functioned as a cathodic inhibitor. AC impedance spectra revealed that a protective film was formed on the metal surface. The nature of the metal surface was analyzed by FTIR spectra, SEM and AFM analyses.

SIMULATION OF E-CLOUD DRIVEN INSTABILITY AND ITS ATTENUATION USING A FEEDBACK SYSTEM IN THE CERN SPS

International Nuclear Information System (INIS)

Vay, J.-L.; Byrd, J.M.; Furman, M.A.; Secondo, R.; Venturini, M.; Fox, J.D.; Rivetta, C.H.; Hofle, W.

2010-01-01

Electron clouds have been shown to trigger fast growing instabilities on proton beams circulating in the SPS (1), and a feedback system to control the instabilities is under active development (2). We present the latest improvements to the Warp-Posinst simulation framework and feedback model, and its application to the self-consistent simulations of two consecutive bunches interacting with an electron cloud in the SPS.

SPS transfer line TT60 towards W-Area

CERN Multimedia

CERN PhotoLab

1978-01-01

Tranfer line TT60 from SPS LSS6 towards the W-Area. View in the direction of the beam. After the magnet, there is a secondary-emission profile monitor, followed by a secondary-emission split-foil (for centering the beam). A TV camera (sticking up prominently) looks at a scintillator screen. The huge tank (with a person standing behind it) houses a beam dump (allowing setting- up of extraction without sending a beam to the W-Area).

Upgrades to the SPS-to-LHC Transfer Line Beam Stoppers for the LHC High-Luminosity Era

CERN Document Server

Kain, Verena; Fraser, Matthew; Goddard, Brennan; Meddahi, Malika; Perillo Marcone, Antonio; Steele, Genevieve; Velotti, Francesco

2016-01-01

Each of the 3 km long transfer lines between the SPS and the LHC is equipped with two beam stoppers (TEDs), one at the beginning of the line and one close to the LHC injection point, which need to absorb the full transferred beam. The beam stoppers are used for setting up the SPS extractions and transfer lines with beam without having to inject into the LHC. Energy deposition and thermo-mechanical simulations have, however, shown that the TEDs will not be robust enough to safely absorb the high intensity beams foreseen for the high-luminosity LHC era. This paper will summarize the simulation results and limitations for upgrading the beam stoppers. An outline of the hardware upgrade strategy for the TEDs together with modifications to the SPS extraction interlock system to enforce intensity limitations for beam on the beam stoppers will be given.

Sodium dodecyl benzene sulphonate mediated tautomerism of Eriochrome Black-T: Effect of charge transfer interaction

Science.gov (United States)

Ghosh, Sumit

2010-11-01

Interaction between anionic surfactant, sodium dodecyl benzene sulphonate, (SDBS) and an anionic dye Eriochrome Black-T, (EBT) has been investigated by visible spectroscopy, conductometry, dynamic light scattering and zeta potential measurements. Spectral changes of EBT observed on addition of SDBS indicate formation of quinone-hydrazone tautomer at pH 7.0, whereas in absence of SDBS this change appears at pH ˜ 9.45. However, at pH 7.0 this change in tautomerism is not observed in presence of sodium dodecyl sulphate (SDS). Experimental results indicate presence of charge transfer interaction between less stable quinone-hydrazone tautomer of EBT and SDBS molecules, which is confirmed using Benesi-Hildebrand and Scott equations.

A Comparative Study of the Eco toxicity of Palm-Based Methyl Ester Sulphonates (MES) to Tilapia and Daphnia magna

International Nuclear Information System (INIS)

Razmah, G.; Afida, I.S.; Zulina, A.M.; Noorazah, Z.; Hazimah, A.H.

2016-01-01

Methyl ester sulphonates (MES) is a surfactant derived from plant resources, suitable as active ingredient in detergents. MES possesses good surface-active properties, good detergency and tolerant to water hardness. In this study, the eco toxicity of MES was evaluated through the 48 hr Daphnia magna immobilisation test and the 96 hr fish acute toxicity test with Tilapia. MES samples with different alkyl chain lengths (C14, C16 and C16:18) produced by the Malaysian Palm Oil Board (MPOB) and commercial MES (C16:18) were tested. Results from all tests indicated that Daphnia was more sensitive to toxic effects from MES than was Tilapia. There is also significant difference in eco toxicity responses for palm-based MES of various chain lengths regardless of the species tested. The eco toxicity increased as the hydrophobicity of the MES increased due to increase of alkyl chain length. However, less than 30 % of MES is used in detergent products and will not pose environmental effects on aquatic organisms. MES is therefore suitable for environmental compatible cleaning products in view of its eco toxicity that is on par to the widely used anionic surfactants, such as linear alkylbenzene sulphonate (LAS). The use of MES in cleaning products may help the industry to fulfil its social responsibility to a cleaner and better environment. (author)

Charmonia suppression in nucleus-nucleus interactions at CERN SPS

CERN Document Server

Arnaldi, R; Alexa, C; Arnaldi, R; Atayan, M; Baglin, C; Baldit, A; Bedjidian, M; Beolè, S; Boldea, V; Bordalo, P; Borenstein, S R; Borges, G; Bussière, A; Capelli, L; Castanier, C; Castor, J I; Chaurand, B; Cheynis, B; Chiavassa, E; Cicalò, C; Claudino, T; Comets, M P; Constantinescu, S; Cortese, P; Cruz, J; De Falco, A; De Marco, N; Dellacasa, G; Devaux, A; Dita, S; Drapier, O; Espagnon, B; Fargeix, J; Force, P; Gallio, M; Gavrilov, Yu K; Gerschel, C; Giubellino, P; Golubeva, M B; Gonin, M; Grigorian, A A; Grigorian, S; Grossiord, J Y; Guber, F F; Guichard, A; Gulkanian, H R; Hakobyan, R S; Haroutunian, R; Idzik, M; Jouan, D; Karavitcheva, T L; Kluberg, L; Kurepin, A B; Le Bornec, Y; Lourenço, C; Macciotta, P; MacCormack, M; Marzari-Chiesa, A; Masera, M; Masoni, A; Monteno, M; Musso, A; Petiau, P; Piccotti, A; Pizzi, J R; Prado da Silva, W L; Prino, F; Puddu, G; Quintans, C; Ramello, L; Ramos, S; Rato-Mendes, P; Riccati, L; Romana, A; Scalas, E; Saturnini, P; Scomparin, E; Serci, S; Shahoyan, R; Sigaudo, F; Sitta, M; Sonderegger, P; Tarrago, X; Topilskaya, N S; Usai, G L; Vercellin, E; Villatte, L; Willis, N; Wu, T

2004-01-01

The NA50 experiment at CERN SPS has studied charmonium production in Pb-Pb collisions at 158 GeV/c per nucleon. According to the theoretical predictions the observation of the suppression of the J/ psi production yield is expected to be an unambiguous probe for a phase transition from ordinary nuclear matter towards a state in which quarks and gluons are deconfined. (10 refs).

Proposal to Search for Heavy Neutral Leptons at the SPS

CERN Document Server

Bonivento, W.; Dijkstra, H.; Egede, U.; Ferro-Luzzi, M.; Goddard, B.; Golutvin, A.; Gorbunov, D.; Jacobsson, R.; Panman, J.; Patel, M.; Ruchayskiy, O.; Ruf, T.; Serra, N.; Shaposhnikov, M.; Treille, D.; CERN. Geneva. SPS and PS Experiments Committee; SPSC

2013-01-01

A new fixed-target experiment at the CERN SPS accelerator is proposed that will use decays of charm mesons to search for Heavy Neutral Leptons (HNLs), which are right-handed partners of the Standard Model neutrinos. The existence of such particles is strongly motivated by theory, as they can simultaneously explain the baryon asymmetry of the Universe, account for the pattern of neutrino masses and oscillations and provide a Dark Matter candidate. Cosmological constraints on the properties of HNLs now indicate that the majority of the interesting parameter space for such particles was beyond the reach of the previous searches at the PS191, BEBC, CHARM, CCFR and NuTeV experiments. For HNLs with mass below 2 GeV, the proposed experiment will improve on the sensitivity of previous searches by four orders of magnitude and will cover a major fraction of the parameter space favoured by theoretical models. The experiment requires a 400 GeV proton beam from the SPS with a total of 2x10^20 protons on target, achie...

LS1 Report: A highly choreographed ballet in the SPS

CERN Multimedia

Katarina Anthony

2014-01-01

With only one short month left until beam, the SPS teams have been kept busy with powering and operations tests. Alongside this demanding work, they have also successfully removed and replaced four key elements of the accelerator.   Since beginning their hardware-testing phase in early July, teams have been carrying out Electrical Power Converter tests and a wide range of start-up tests for the various equipment groups. Slotted amongst this busy schedule of tests were the final checks of the accelerator's magnets and beam dump. "There are three main types of magnet faults and we found we had one of each: an electrical fault (short circuit) in the magnet, a water leak (as the magnets are water cooled) and a vacuum chamber leak," says David McFarlane, the SPS technical coordinator from the Engineering Department. "On top of that, there was a problem with the main beam dump, which meant it also had to be replaced. In the end, rather than stopping the tests for each...

Measurements made in the SPS with a rest gas profile monitor by collecting electrons

International Nuclear Information System (INIS)

Fischer, C.; Koopman, J.

2000-01-01

Measurements have regularly been performed during the 1999 run, using the Rest Gas Monitor installed in the SPS. The exploited signal resulted from electrons produced by ionization of the rest gas during the circulating beam passage. A magnetic field parallel to the electric extraction field was applied to channel the electrons. Proton beam horizontal transverse distributions were recorded during entire SPS acceleration cycles, between 14 GeV/c and 450 GeV/c and for different beam structures and bunch intensities. The influence of several parameters on the measured beam profiles was investigated. Results are presented and analyzed in order to determine the performance that can be expected

Study of Hadron Production in Hadron-Nucleus and Nucleus-Nucleus Collisions at the CERN SPS

CERN Multimedia

Klochkov, V; Herve, A E; Kowalski, S; Kaptur, E A; Kowalik, K L; Dominik, W M; Matulewicz, T N; Krasnoperov, A; Feofilov, G; Vinogradov, L; Kovalenko, V; Johnson, S R; Planeta, R J; Rubbia, A; Marton, K; Messerly, B A; Puzovic, J; Bogomilov, M V; Bravar, A; Renfordt, R A E; Deveaux, M; Engel, R R; Grzeszczuk, A; Davis, N; Kuich, M; Lyubushkin, V; Kondratev, V; Kadija, K; Diakonos, F; Slodkowski, M A; Rauch, W H; Pistillo, C; Laszlo, A; Nakadaira, T; Hasegawa, T; Sadovskiy, A; Morozov, S; Petukhov, O; Mathes, H; Roehrich, D; Marcinek, A J; Marino, A D; Grebieszkow, K; Di luise, S; Wlodarczyk, Z; Rybczynski, M A; Wojtaszek-szwarc, A; Nirkko, M C; Sakashita, K; Golubeva, M; Kurepin, A; Manic, D; Kolev, D I; Kisiel, J E; Koziel, M E; Rondio, E; Larsen, D T; Czopowicz, T R; Seyboth, P; Turko, L; Guber, F; Marin, V; Busygina, O; Strikhanov, M; Taranenko, A; Cirkovic, M; Roth, M A; Pulawski, S M; Aduszkiewicz, A M; Bunyatov, S; Vechernin, V; Nagai, Y; Anticic, T; Dynowski, K M; Mackowiak-pawlowska, M K; Stefanek, G; Pavin, M; Fodor, Z P; Nishikawa, K; Tada, M; Blondel, A P P; Stroebele, H W; Posiadala, M Z; Kolesnikov, V; Andronov, E; Zimmerman, E D; Antoniou, N; Majka, Z; Dumarchez, J; Naskret, M; Ivashkin, A; Tsenov, R V; Koziel, M G; Schmidt, K J; Melkumov, G; Popov, B; Panagiotou, A; Richter-was, E M; Morgala, S J; Paolone, V; Damyanova, A; Gazdzicki, M; Unger, M T; Wilczek, A G; Stepaniak, J M; Seryakov, A; Susa, T; Staszel, P P; Brzychczyk, J; Maksiak, B; Tefelski, D B

2007-01-01

The NA61/SHINE (SHINE = SPS Heavy Ion and Neutrino Experiment) experiment is a large acceptance hadron spectrometer at the CERN SPS for the study of the hadronic final states produced in interactions of various beam particles (pions, protons, C, S and In) with a variety of fixed targets at the SPS energies. The main components of the current detector were constructed and used by the NA49 experiment. The physics program of NA61/SHINE consists of three main subjects. In the first stage of data taking (2007-2009) measurements of hadron production in hadron-nucleus interactions needed for neutrino (T2K) and cosmic-ray (Pierre Auger and KASCADE) experiments will be performed. In the second stage (2009-2011) hadron production in proton-proton and proton-nucleus interactions needed as reference data for a better understanding of nucleus-nucleus reactions will be studied. In the third stage (2009-2013) energy dependence of hadron production properties will be measured in nucleus-nucleus collisions as well as in p+p a...

Microwave energy transmission test toward the SPS using the space station

Energy Technology Data Exchange (ETDEWEB)

Kaya, N.; Matsumoto, H.; Miyatake, S.; Kimura, I.; Nagatomo, M.

1986-12-01

An outline of a project METT (Microwave Energy Transmission Test) using the Space Station is described. The objectives of the METT are to develop and test the technology of microwave energy transmission for the future Solar Power Satellite (SPS), and to estimate the environmental effects of the high power microwaves on the ionosphere and the atmosphere. Energy generated with solar cells is transmitted from a transmitting antenna on the bus platform near the Space Station to a rectenna on the sub-satellite or the ground station in order to test the total efficiency and the functions of the developed system of the energy transmission. Plasma similar to that in the D and E layers in the ionosphere is produced in a large balloon opened on the sub-satellite in order to investigate possible interactions between the SPS microwave and the ionospheric plasma and to determine the maximum power density of the microwave beam which passes through the ionosphere.

The hardware implementation of the CERN SPS ultrafast feedback processor demonstrator

CERN Document Server

Dusakto, J E; Fox, J D; Olsen, J; Rivetta, C H; Höfle, W

2013-01-01

An ultrafast 4GSa/s transverse feedback processor has been developed for proof-of-concept studies of feedback control of e-cloud driven and transverse mode coupled intra-bunch instabilities in the CERN SPS. This system consists of a high-speed ADC on the front end and equally fast DAC on the back end. All control and signal processing is implemented in FPGA logic. This system is capable of taking up to 16 sample slices across a single SPS bunch and processing each slice individually within a reconfigurable signal processor. This demonstrator system is a rapidly developed prototype, consisting of both commercial and custom-design components. It can stabilize the motion of a single particle bunch using closed loop feedback. The system can also run open loop as a high-speed arbitrary waveform generator and contains diagnostic features including a special ADC snapshot capture memory. This paper describes the overall system, the feedback processor and focuses on the hardware architecture, design ...

Beam Losses and Lifetime of the LHC Beam in the SPS

CERN Document Server

Bohl, T; Shaposhnikova, Elena; Tückmantel, Joachim

2006-01-01

Studies of the LHC beam loss in the SPS started in 2003 [1], [2] and continued in 2004. The flat bottom losses strongly depend on the batch intensity and the RF voltage. For beam with the 75 ns spacing at the same bunch intensity they are smaller than for the 25 ns spaced bunches. Large voltage on the flat bottom together with some optimum voltage at injection helps to reduce losses. Analysis of data from 2003 has shown that observations are compatible with a diffusion like process on the flat bottom. Therefore significant time during 2004 was devoted to studies of possible RF noise sources. However the main improvement in beam lifetime on the flat bottom was observed after a change in the working point in the transverse plane (MD on 1.09.2004). In this Note we present measurements of beam loss and lifetime done during several dedicated SPS MDs for different conditions in the ring. Analysis of beam coasts will be presented separately.

Report from the NA61/SHINE experiment at the CERN SPS

CERN Document Server

Abgrall, N; Andrieu, B; Anticic, T; Antoniou, N; Asryan, A; Baatar, B; Blondel, A; Blumer, J; Boldizsar, L; Bravar, A; Brzychczyk, J; Bunyatov, S; Choi, K-U; Christakoglou, P; Chung, P; Cleymans, J; Derkach, D; Diakonos, F; Dominik, Wojciech; Dumarchez, J; Engel, R; Ereditato, A; Feofilov, G; Fodor, Z; Gazdzicki, M; Golubeva, M; Grebieszkow, K; Guber, F; Hasegawa, T; Haungs, A; Hess, M; Igolkin, S; Ivanov, A; Ivashkin, A; Kadija, K; Katrynska, N; Kielczewska, D; Kikola, D; Kim, J-H; Kobayashi, T; Kolesnikov, V; Kolev, D; Kolevatov, R; Kondratiev, V; Kurepin, A; Lacey, R; Laszlo, A; Lehmann, S; Lungwitz, B; Lyubushkin, V; Maevskaya, A; Majka, Z; Malakhov, A; Marchionni, A; Marcinek, A; Di Marco, M; Matveev, V; Melkumov, G; Meregaglia, A; Messina, M; Meurer, C; Mijakowski, P; Mitrovski, M; Mrówczynski, S; Murphy, S; Nakadaira, T; Naumenko, P; Nikolic, V; Nishikawa, K; Palczewski, T; Pálla, G; Panagiotou, A; Peryt, W; Petridis, A; Planeta, R; Pluta, J; Popov, B; Posiadala, M; Przewlocki, P; Rauch, W; Ravonel, M; Renfordt, R; Röhrich, D; Rondio, E; Rossi, B; Roth, M; Rubbia, André; Rybczynski, M; Sadovskii, A; Sakashita, K; Schuster, T; Sekiguchi, T; Seyboth, P; Shileev, K; Sisakian, A; Skrzypczak, E; Slodkowski, M; Sorin, A; Staszel, P; Stefanek, G; Stepaniak, J; Strabel, C; Ströbele, H; Susa, T; Szentpétery, I; Szuba, M; Taranenko, A; Tsenov, R; Unger, M; Vassiliou, M; Vechernin, V; Vesztergombi, G; Wlodarczyk, Z; Wojtaszek, A; Yi, J-G; Yoo, I-K

2008-01-01

The physics program of the NA61/SHINE (SHINE = SPS Heavy Ion and Neutrino Experiment) experiment at the CERN SPS consists of three subjects. In the first stage of data taking (2007-2008) the measurements of hadron production in hadron-nucleus interactions needed for neutrino (T2K) and cosmic-ray (Pierre Auger and KASCADE) experiments will be performed. In the second stage (2008-2010) hadron production in proton-proton and proton-nucleus interactions needed as a reference data for better understanding of nucleus-nucleus reactions will be studied. In the third stage (2010-2012) hadron production will be measured in nucleus-nucleus collisions, with the aim to identify the properties of the onset of deconfinement and find evidence for the critical point of strongly interacting matter. The experiment was approved at CERN in June 2007. The first pilot run was performed during October 2007. We report here first results from this run.

Prototyping Real-Time Control in the SPS

CERN Document Server

Andersson, J; Jensen, L; Jones, R; Lamont, M; Wenninger, J; Wijnands, Thijs; CERN. Geneva. AB Department

2003-01-01

Real-time control of beam related parameters will be required in the LHC. In order to gain experience of the issues involved in implementing distributed real-time control over large distances, a prototype local orbit feedback system is being developed in the SPS. This will use 6 pickups, each equipped with the full LHC acquisition electronics chain and linked to a real-time communication and feedback system. This reports summarises the .rst tests performed with this system in October 2002, where the data from four pickups was successfully acquired and displayed at 10 Hz in the control room.

Differential transcriptional regulation of banana sucrose phosphate synthase gene in response to ethylene, auxin, wounding, low temperature and different photoperiods during fruit ripening and functional analysis of banana SPS gene promoter.

Science.gov (United States)

Roy Choudhury, Swarup; Roy, Sujit; Das, Ranjan; Sengupta, Dibyendu N

2008-12-01

Sucrose phosphate synthase (SPS) (EC 2.3.1.14) is the key regulatory component in sucrose formation in banana (Musa acuminata subgroup Cavendish, cv Giant governor) fruit during ripening. This report illustrates differential transcriptional responses of banana SPS gene following ethylene, auxin, wounding, low temperature and different photoperiods during ripening in banana fruit. Whereas ethylene strongly stimulated SPS transcript accumulation, auxin and cold treatment only marginally increased the abundance of SPS mRNA level, while wounding negatively regulated SPS gene expression. Conversely, SPS transcript level was distinctly increased by constant exposure to white light. Protein level, enzymatic activity of SPS and sucrose synthesis were substantially increased by ethylene and increased exposure to white light conditions as compared to other treatments. To further study the transcriptional regulation of SPS in banana fruit, the promoter region of SPS gene was cloned and some cis-acting regulatory elements such as a reverse GCC-box ERE, two ARE motifs (TGTCTC), one LTRE (CCGAA), a GAGA-box (GAGA...) and a GATA-box LRE (GATAAG) were identified along with the TATA and CAAT-box. DNA-protein interaction studies using these cis-elements indicated a highly specific cis-trans interaction in the banana nuclear extract. Furthermore, we specifically studied the light responsive characteristics of GATA-box containing synthetic as well as native banana SPS promoter. Transient expression assays using banana SPS promoter have also indicated the functional importance of the SPS promoter in regulating gene expression. Together, these results provide insights into the transcriptional regulation of banana SPS gene in response to phytohormones and other environmental factors during fruit ripening.

Optics Measurements and Matching of TT2-TT10 Line for Injection of the LHC Beam in the SPS

CERN Document Server

Benedetto, E; Guerrero, A; Jacquet, D

2008-01-01

A well matched injection in the SPS is very important for preserving the emittance of the LHC beam. The paper presents the algorithms used for the analysis and the results of the optics measurements done in the transfer line TT2-TT10 and in the SPS. The dispersion is computed by varying the beam momentum and recording the offsets at the BPMs, while the Twiss parameters and emittance measurements in TT2-TT10 are performed with beam profile monitors equipped with OTR screens. These results are completed by those obtained with a matching monitor installed in the SPS as a prototype for the LHC. This device makes use of an OTR screen and a fast acquisition system, to get the turn by turn beam profiles right at injection in the ring, from which the beam mismatch is computed and compared with the results obtained in the line. Finally, on the basis of such measurements, a betatron and dispersion matching of TT2-TT10 for injection in the SPS has been performed and successfully put in operation.

Preliminary environmental assessment for the Satellite Power System (SPS). Revision 1. Volume 2. Detailed assessment

Energy Technology Data Exchange (ETDEWEB)

1980-01-01

The Department of Energy (DOE) is considering several options for generating electrical power to meet future energy needs. The satellite power system (SPS), one of these options, would collect solar energy through a system of satellites in space and transfer this energy to earth. A reference system has been described that would convert the energy to microwaves and transmit the microwave energy via directive antennas to large receiving/rectifying antennas (rectennas) located on the earth. At the rectennas, the microwave energy would be converted into electricity. The potential environmental impacts of constructing and operating the satellite power system are being assessed as a part of the Department of Energy's SPS Concept Development and Evaluation Program. This report is Revision I of the Preliminary Environmental Assessment for the Satellite Power System published in October 1978. It refines and extends the 1978 assessment and provides a basis for a 1980 revision that will guide and support DOE recommendations regarding future SPS development. This is Volume 2 of two volumes. It contains the technical detail suitable for peer review and integrates information appearing in documents referenced herein. The key environmental issues associated with the SPS concern human health and safety, ecosystems, climate, and electromagnetic systems interactions. In order to address these issues in an organized manner, five tasks are reported: (I) microwave-radiation health and ecological effects; (II) nonmicrowave health and ecological effectss; (III) atmospheric effects; (IV) effects on communication systems due to ionospheric disturbance; and (V) electromagnetic compatibility. (WHK)

Synthesis and characterization of sulfonate polystyrene-lignosulfonate-alumina (SPS-LS-Al{sub 2}O{sub 3}) polyblends as electrolyte membranes for fuel cell

Energy Technology Data Exchange (ETDEWEB)

Gonggo, Siang Tandi, E-mail: standigonggo@yahoo.com [Chemistry Research Groups, Faculty of Teacher Training and Educational Sciences, Tadulako University (Indonesia)

2015-09-30

The new type of electrolyte membrane materials has been prepared by blend sulfonated polystyrene (SPS), lignosulfonate (LS), and alumina (SPS-LS-Al{sub 2}O{sub 3}) by casting polymer solution. The resulting polymer electrolyte membranes were then characterized by functional groups analysis, mechanical properties, water uptake, ion exchange capacity, and proton conductivity. SPS-LS-Al{sub 2}O{sub 3} membranes with alumina composition various have been proven qualitatively by analysis of functional groups. Increasing the Al{sub 2}O{sub 3} ratio resulted in higher ion exchange capacity (IEC), mechanical strength and proton conductivity, but water uptake decreased. The SPS-LS-Al{sub 2}O{sub 3} blend showed higher proton conductivity than Nafion 117.

The preparation of 125I labelled sodium polystyrene sulphonate

International Nuclear Information System (INIS)

Harrison, I.; Higgo, J.J.W.; Williams, G.M.

1992-01-01

A radio-labelled polymeric colloid for use in field studies of colloidal migration was prepared. Sodium polystyrene p-sulphonate (PSSNa) with an average molecular weight of 500,000 Daltons was labelled with iodine 125. The report describes the preparation, purification and characterisation of this material. In order to use a standard technique for radio-iodination, by the iodinium ion, a very small number of phenolic groups had to be introduced into the polymer initially. This was done by a carefully controlled reaction with sodium hydroxide optimised so that a qualitative test for p-phenols gave a discernible positive result yet size exclusion chromatography indicated that no noticeable change in bulk properties of the PSSNa had occurred. The modified PSSNa was radio-iodinated and size exclusion chromatography was used to quantify the yield, activity and stability of the product. The radio-iodination of a bulk sample of the modified PSSNa was entrusted to Amersham who prepared a labelled product with an activity of 1.12 MBq per mg PSSNa. The mobility of this material was studied in the laboratory using spike injections onto columns of Drigg sand, sieved and unsieved, eluted with Drigg groundwater. The results indicated that transport of PSSNa in the field should give information on the structure of flow paths in the Drigg aquifer. (Author)

Satellite Power Systems (SPS) concept definition study, exhibit C. Volume 2, part 1: System engineering

Science.gov (United States)

Hanley, G. M.

1979-01-01

Volume 2, Part 1, of a seven volume report is presented. Part 1 encompasses Satellite Power Systems (SPS) systems engineering aspects and is divided into three sections. The first section presents descriptions of the various candidate concepts considered and conclusions and recommendations for a preferred concept. The second section presents a summary of results of the various trade studies and analysis conducted during the course of the study. The third section describes the Photovoltaic Satellite Based Satellite Power System (SPS) Point Design as it was defined through studies performed during the period January 1977 through March 1979.

SPS-ALPHA: The First Practical Solar Power Satellite via Arbitrarily Large PHased Array

Data.gov (United States)

National Aeronautics and Space Administration — SPS-ALPHA (Solar Power Satellite via Arbitrarily Large Phased Array) is a novel, bio-mimetic approach to the challenge of space solar power. If successful, this...

Electron cloud in the CERN accelerators (PS, SPS, LHC)

International Nuclear Information System (INIS)

Iadarola, G; Rumolo, G

2013-01-01

Several indicators have pointed to the presence of an Electron Cloud (EC) in some of the CERN accelerators, when operating with closely spaced bunched beams. In particular, spurious signals on the pick ups used for beam detection, pressure rise and beam instabilities were observed at the Proton Synchrotron (PS) during the last stage of preparation of the beams for the Large Hadron Collider (LHC), as well as at the Super Proton Synchrotron (SPS). Since the LHC has started operation in 2009, typical electron cloud phenomena have appeared also in this machine, when running with trains of closely packed bunches (i.e. with spacings below 150ns). Beside the above mentioned indicators, other typical signatures were seen in this machine (due to its operation mode and/or more refined detection possibilities), like heat load in the cold dipoles, bunch dependent emittance growth and degraded lifetime in store and bunch-by-bunch stable phase shift to compensate for the energy loss due to the electron cloud. An overview of the electron cloud status in the different CERN machines (PS, SPS, LHC) will be presented in this paper, with a special emphasis on the dangers for future operation with more intense beams and the necessary countermeasures to mitigate or suppress the effect. (author)

Physics at the AD/PS/SPS (3/4)

CERN Multimedia

CERN. Geneva

2012-01-01

Lecture 3: Flavour and Neutrinos The CERN SPS provides kaon and neutrino beams which are unique in the world. The lecture will describe the flavour and neutrino research conducted with these beams. The flavour programme is centered around the study of kaons. It includes a broad spectrum of topics such as CP-Violation, the precise determination of quark-mixing parameters, lepton universality and very rare decays. The CNGS neutrino beam enables to perform long baseline neutrino oscillation experiments with unique features such as the tau lepton appearance.

Immobilization of Bacillus sp. in mesoporous activated carbon for degradation of sulphonated phenolic compound in wastewater

Energy Technology Data Exchange (ETDEWEB)

Sekaran, G., E-mail: ganesansekaran@gmail.com [Environmental Technology Division, Council of Scientific and Industrial Research (CSIR), Central Leather Research Institute (CLRI), Adyar, Chennai-600 020 (India); Karthikeyan, S. [Environmental Technology Division, Council of Scientific and Industrial Research (CSIR), Central Leather Research Institute (CLRI), Adyar, Chennai-600 020 (India); Gupta, V.K. [Department of Chemistry, Indian Institute of Technology Roorkee, Roorkee-247 667 (India); Department of Chemistry, King Fahd University of Petroleum and Minerals, Dhahran 31261 (Saudi Arabia); Boopathy, R.; Maharaja, P. [Environmental Technology Division, Council of Scientific and Industrial Research (CSIR), Central Leather Research Institute (CLRI), Adyar, Chennai-600 020 (India)

2013-03-01

Xenobiotic compounds are used in considerable quantities in leather industries besides natural organic and inorganic compounds. These compounds resist biological degradation and thus they remain in the treated wastewater in the unaltered molecular configurations. Immobilization of organisms in carrier matrices protects them from shock load application and from the toxicity of chemicals in bulk liquid phase. Mesoporous activated carbon (MAC) has been considered in the present study as the carrier matrix for the immobilization of Bacillus sp. isolated from Effluent Treatment Plant (ETP) employed for the treatment of wastewater containing sulphonated phenolic (SP) compounds. Temperature, pH, concentration, particle size and mass of MAC were observed to influence the immobilization behavior of Bacillus sp. The percentage immobilization of Bacillus sp. was the maximum at pH 7.0, temperature 20 Degree-Sign C and at particle size 300 {mu}m. Enthalpy, free energy and entropy of immobilization were - 46.9 kJ mol{sup -1}, - 1.19 kJ mol{sup -1} and - 161.36 J K{sup -1} mol{sup -1} respectively at pH 7.0, temperature 20 Degree-Sign C and particle size 300 {mu}m. Higher values of {Delta}H{sup 0} indicate the firm bonding of the Bacillus sp. in MAC. Degradation of aqueous sulphonated phenolic compound by Bacillus sp. immobilized in MAC followed pseudo first order rate kinetics with rate constant 1.12 Multiplication-Sign 10{sup -2} min{sup -1}. Highlights: Black-Right-Pointing-Pointer Degradation on phenolic syntan using immobilized activated carbon as catalyst. Black-Right-Pointing-Pointer Bacillus sp. immobilized cell reactor removed all refractory organic loads. Black-Right-Pointing-Pointer The removal mechanism is due to co-metabolism between carbon and organisms. Black-Right-Pointing-Pointer The organics are completely metabolized rather than adsorption.

SPS RF Accelerating Cavity

CERN Multimedia

1979-01-01

This picture shows one of the 2 new cavities installed in 1978-1979. The main RF-system of the SPS comprises four cavities: two of 20 m length and two of 16.5 m length. They are all installed in one long straight section (LSS 3). These cavities are of the travelling-wave type operating at a centre frequency of 200.2 MHz. They are wideband, filling time about 700 ns and untuned. The power amplifiers, using tetrodes are installed in a surface building 200 m from the cavities. Initially only two cavities were installed, a third cavity was installed in 1978 and a forth one in 1979. The number of power amplifiers was also increased: to the first 2 MW plant a second 2 MW plant was added and by end 1979 there were 8 500 kW units combined in pairs to feed each of the 4 cavities with up to about 1 MW RF power, resulting in a total accelerating voltage of about 8 MV. See also 7412016X, 7412017X, 7411048X

How dense does parton matter get in Pb + Pb collisions at the CERN SPS?

International Nuclear Information System (INIS)

Geiger, K.; Mueller, B.

1998-01-01

The qualitative features of parton production through materialization in heavy-ion collisions are examined within perturbative QCD, and the magnitude of the resulting parton density created during the early stage of the collisions is estimated. The implications for 'anomalous' J/ψ suppression observed in Pb + Pb collisions at the CERN SPS are discussed. The A-dependence of absorption of J/ψ by (partonic) comovers is steeper than assumed in most phenomenological models, because the absorption process is dominated by quasi-perturbative QCD interactions. The argument is supported by results recently obtained in the framework of the parton cascade model. Significant 'anomalous' suppression for Pb + Pb collisions at the CERN-SPS are predicted, but not for S + U collisions. (author)

Prototype Environmental Assessment of the impacts of siting and construction of an SPS ground receiving station

Science.gov (United States)

Hill, J.

1980-01-01

A prototype assessment of the environmental impacts of siting and constructing a Satellite Power System (SPS) Ground Receiving Station (GRS) is reported. The objectives of the study were: (1) to develop an assessment of the nonmicrowave related impacts of the reference system SPS GRS on the natural environment; (2) to assess the impacts of GRS construction and operations in the context of actual baseline data for a site in the California desert; and (3) to identify critical GRS characteristics or parameters that are most significant in terms of the natural environment.

NA62 experiment at CERN SPS

Directory of Open Access Journals (Sweden)

Kozhuharov Venelin

2014-01-01

Full Text Available The NA62 experiment at SPS is a continuation of the long standing CERN kaon physics program. The high statistics and the unprecedent precision allow to probe the Standard Model and test the description of the strong interactions at low energy. The final results on the the lepton universality test by measuring the ratio RK = Γ(K+ → e+ν/Γ(K+ → µ+ν and the study of the K± → π±γγ decay are presented. The major goal of the NA62 experiment is to perform a measurement of the Br(K+ → π+νν̄ with a precision of 10% in two years of data taking. The detector setup together with the analysis technique is described.

Chromosomal break points in irradiated and ethyl methane sulphonate treated leucocytes of patients with Down syndrome

International Nuclear Information System (INIS)

Reeja, T.C.; Chandra, N.; Marimuthu, K.M.

1993-01-01

Frequencies of chromosomal damage in the peripheral leucocytes of patients with Down syndrome, on exposure to gamma rays (2Gy) or ethyl methane sulphonate (EMS, 1 x 10 -4 M), were assessed. Analysis of break points in the chromosomes of irradiated cells revealed a non-random occurrence. Six of the break points observed in EMS-treated cells were found to overlap with those recorded in irradiated cells. Thirteen break points observed were found to correlate with the location of cancer-specific break points and four of these coincided with the bands where oncogenes have been located. Two break points were localised to the same bands as that of known heritable fragile sites. (author). 17 refs., 2 figs., 3 tabs

Observation of strong leakage reduction in crystal assisted collimation of the SPS beam

Energy Technology Data Exchange (ETDEWEB)

Scandale, W. [CERN, European Organization for Nuclear Research, CH-1211 Geneva 23 (Switzerland); Laboratoire de l' Accelerateur Lineaire (LAL), Universite Paris Sud Orsay, Orsay (France); INFN Sezione di Roma, Piazzale Aldo Moro 2, 00185 Rome (Italy); Arduini, G.; Butcher, M.; Cerutti, F.; Garattini, M.; Gilardoni, S.; Lechner, A.; Losito, R.; Masi, A.; Mereghetti, A.; Metral, E. [CERN, European Organization for Nuclear Research, CH-1211 Geneva 23 (Switzerland); Mirarchi, D. [CERN, European Organization for Nuclear Research, CH-1211 Geneva 23 (Switzerland); Imperial College, London (United Kingdom); Montesano, S.; Redaelli, S. [CERN, European Organization for Nuclear Research, CH-1211 Geneva 23 (Switzerland); Rossi, R. [CERN, European Organization for Nuclear Research, CH-1211 Geneva 23 (Switzerland); INFN Sezione di Roma, Piazzale Aldo Moro 2, 00185 Rome (Italy); Schoofs, P.; Smirnov, G. [CERN, European Organization for Nuclear Research, CH-1211 Geneva 23 (Switzerland); Bagli, E.; Bandiera, L.; Baricordi, S. [INFN Sezione di Ferrara, Dipartimento di Fisica, Università di Ferrara, Ferrara (Italy); and others

2015-09-02

In ideal two-stage collimation systems, the secondary collimator–absorber should have its length sufficient to exclude practically the exit of halo particles with large impact parameters. In the UA9 experiments on the crystal assisted collimation of the SPS beam a 60 cm long tungsten bar is used as a secondary collimator–absorber which is insufficient for the full absorption of the halo protons. Multi-turn simulation studies of the collimation allowed to select the position for the beam loss monitor downstream the collimation area where the contribution of particles deflected by the crystal in channeling regime but emerging from the secondary collimator–absorber is considerably reduced. This allowed observation of a strong leakage reduction of halo protons from the SPS beam collimation area, thereby approaching the case with an ideal absorber.

Optics Measurements and Matching of TT2-TT10 Line for Injection of the LHC Beam in the SPS

CERN Document Server

Benedetto, E

2008-01-01

A well matched injection in the SPS is very important for preserving the emittance of the LHC beam. The paper presents the algorithms used for the analysis and the results of the 2007 optics measurements campaign done in the transfer line TT2-TT10 and in the SPS. The dispersion is computed by varying the beam momentum and recording the offsets at the BPMs, while the Twiss parameters and emittance measurements in TT2-TT10 are performed with beam profile monitors equipped with OTR screens. Finally, on the basis of such measurements, a betatron and dispersion matching of TT2-TT10 for injection in the SPS has been performed and successfully put in operation since October 2007.

Extraction and separation of Am and rare earth elements in HNO3 solution with P507-sulphonating kerosene

International Nuclear Information System (INIS)

Li Zhenhu; Jiao Rongzhou; Zhu Yongjun

1994-01-01

A study has been made of the extraction equilibrium of Am(III) and rare earth elements (III) in HNO 3 solution with P507-sulphonating kerosene. It has been found that this equilibrium depends on saponification ratio of P507, feed acidity, metal concentration as well as phase ratio. The extraction ability in order is La< Ce< Am< Pr< Nd< Sm. The model of distribution ratio has been founded. The agreement for calculated and experimental values of distribution ratio is fairly good. These values can be used to design the extraction and separation process of Am and rare earth elements

Search for the quark-gluon plasma (1989): The NA35 experiment at the CERN SPS

International Nuclear Information System (INIS)

Pugh, H.G.

1989-09-01

Results from the NA35 experiment at the CERN SPS are described in the context of possible formation and identification of a quark-gluon plasma (QGP). Evidence is presented that the initial energy density and temperature are sufficient for the QGP to be produced, and that hydrodynamic flow occurs in the expansion stage. Evidence for an unexpectedly large pion source size and for enhanced strangeness production is presented, and discussed in terms of QGP formation. Plans for experiments in 1990--91 with an expanded set up are presented, and prospects for a program with Pb beams at the SPS are discussed. 39 refs., 12 figs

Feasibility study of stochastic cooling of bunches in the SPS

International Nuclear Information System (INIS)

Boussard, D.; Chattopadhyay, S.; Dome, G.; Linnecar, T.

1984-01-01

The average luminosity of the SPS collider could be improved if the slow blow-up of transverse emittances due to beam-beam and intrabeam scattering effects were to be reduced by a transverse cooling system. We examine the parameters of such a system and propose a technological approach which seems better suited to the case of a few bunches circulating in a large machine. (orig./HSI)

Longitudinal stability of the LHC beam in the SPS

CERN Document Server

Shaposhnikova, Elena

2001-01-01

Longitudinal beam stability is analysed for the LHC Beam in the SPS. The most critical area is shown to be the top energy. Analysis explains some results of measurements with the beam done d uring the MDs last year. The possibility of using this cycle for CNGS is considered as well. There, without special requirements on bunch parameters at extraction, the impedance limitations move to the lowest energy. An option with low transition energy is presented also.

Dileptons and photons from central heavy-ion collisions at CERN-SPS

CERN Document Server

Kämpfer, B; Pavlenko, O P; Gale, C

2002-01-01

A unique parameterization of secondary (thermal) dilepton and photon yields in heavy-ion experiments at CERN-SPS is proposed. Adding those thermal yields to background contributions the spectral shapes of the CERES/NA45, NA38, NA50, HELIOS/3 and WA98 data from experiments with lead and sulfur beams can be well described.

Transverse Phenomena in Pion Production in Hadronic Collisions at SPS energy

CERN Document Server

Chvála, Ondrej

A comparative study of pion production in hadronic collisio ns at SPS energies focusing on transverse phenomena is presented. Charged pion densities in p+p, p+C, p+Pb and Pb+Pb interactions, obtained at the CERN SPS with the NA49 detecto r setup, are discussed in the forward hemisphere covering ranges in Feynman x F between 0 and 0.4 and in transverse momentum from 0 to 2.1 GeV/c. A detailed description of the da ta analysis, the corrections and centrality determination is given for p+Pb interaction s using a sample of 2 M events. These data are compared to p+p collisions in order to extract those physics quantities which indicate deviations from the elementary reaction specific t o the presence of the nucleus. The evolution of these quantities as a function of centrality is discussed. Their comparison to p+C and Pb+Pb collisions reveals a smooth dependence on the n umber of collisions per participant. In particular, the enhancement of pion yields at high transverse momentum is studied. It is shown to be gove...

Status of UA9, the Crystal Collimation Experiment in the SPS

CERN Document Server

Scandale, W

2011-01-01

UA9 was operated at the CERN-SPS for more than two years to investigate the feasibility of halo collimation with bent crystals. Silicon crystals 2 mm long with bending angles of about 170 μrad were used as primary collimators. The crystal collimation process was steadily achieved through channeling, with high efficiency. The crystal orientation was easily set and optimized with an installed goniometer that has an angular accuracy of about ± 10 μrad. In channeling orientation, the loss rate of the halo particles interacting with the crystal is reduced by half an order of magnitude, whilst the residual off momentum halo escaping from the crystal-collimator area is reduced by a factor two to five. The crystal channeling efficiency of about 75% is reasonably consistent with simulations and with single pass data collected in the extracted proton beam of the SPS North Experimental Area. The accumulated observations, shown in this paper, support our expectation that the coherent deflection of the beam halo by a b...

Social anxiety in the general population: introducing abbreviated versions of SIAS and SPS.

Science.gov (United States)

Kupper, Nina; Denollet, Johan

2012-01-01

Social anxiety is characterized by the experience of stress, discomfort and fear in social situations, and is associated with substantial personal and societal burden. Two questionnaires exist that assess the aspects of social anxiety, i.e. social interaction anxiety (SIAS) and social phobia (SPS). There is no agreement in literature on the dimensionality of social anxiety. Further, the length of a questionnaire may negatively affect response rates and participation at follow-up occasions. To explore the structure of social anxiety in the general population, and to examine psychosocial and sociodemographic correlates. Our second aim was to construct abbreviated versions of SIAS and SPS that can be easily used and with minimal burden. A total of 1598 adults from the general Dutch population completed a survey asking information on social anxiety, mood and demographics. Exploratory and confirmatory factor analyses as well as reliability analysis with item-total statistics were performed. Confirmatory factor analysis revealed a 3-factor structure for social phobia, and a 2-factor structure for the SIAS, with the second factor containing both reversely scored items. The abbreviated versions of SPS (11 items) and SIAS (10 items) show excellent discriminant and construct validity (Cronbach's α=.90 and .92), while specificity analysis showed that gender, marital status and educational level (SIAS(10): pSIAS, reducing the questionnaire burden for participants in epidemiological and biobehavioral research. Copyright © 2011 Elsevier B.V. All rights reserved.

Scaling of charged particle multiplicity in Pb-Pb collisions at SPS energies

CERN Document Server

Abreu, M C; Alexa, C; Arnaldi, R; Ataian, M R; Baglin, C; Baldit, A; Bedjidian, Marc; Beolè, S; Boldea, V; Bordalo, P; Borges, G; Bussière, A; Capelli, L; Castanier, C; Castor, J I; Chaurand, B; Chevrot, I; Cheynis, B; Chiavassa, E; Cicalò, C; Claudino, T; Comets, M P; Constans, N; Constantinescu, S; Cortese, P; De Falco, A; De Marco, N; Dellacasa, G; Devaux, A; Dita, S; Drapier, O; Ducroux, L; Espagnon, B; Fargeix, J; Force, P; Gallio, M; Gavrilov, Yu K; Gerschel, C; Giubellino, P; Golubeva, M B; Gonin, M; Grigorian, A A; Grigorian, S; Grossiord, J Y; Guber, F F; Guichard, A; Gulkanian, H R; Hakobyan, R S; Haroutunian, R; Idzik, M; Jouan, D; Karavitcheva, T L; Kluberg, L; Kurepin, A B; Le Bornec, Y; Lourenço, C; Macciotta, P; MacCormick, M; Marzari-Chiesa, A; Masera, M; Masoni, A; Monteno, M; Musso, A; Petiau, P; Piccotti, A; Pizzi, J R; Prado da Silva, W L; Prino, F; Puddu, G; Quintans, C; Ramello, L; Ramos, S; Rato-Mendes, P; Riccati, L; Romana, A; Santos, H; Saturnini, P; Scalas, E; Scomparin, E; Serci, S; Shahoyan, R; Sigaudo, F; Silva, S; Sitta, M; Sonderegger, P; Tarrago, X; Topilskaya, N S; Usai, G L; Vercellin, Ermanno; Villatte, L; Willis, N

2002-01-01

The charged particle multiplicity distribution $dN_{ch}/d\\eta$ has been measured by the NA50 experiment in Pb--Pb collisions at the CERN SPS. Measurements were done at incident energies of 40 and 158 GeV per nucleon over a broad impact parameter range. The multiplicity distributions are studied as a function of centrality using the number of participating nucleons ($N_{part}$), or the number of binary nucleon--nucleon collisions ($N_{coll}$). Their values at midrapidity exhibit a power law scaling behaviour given by $N_{part}^{1.00}$ and $N_{coll}^{0.75}$ at 158 GeV. Compatible results are found for the scaling behaviour at 40 GeV. The width of the $dN_{ch}/d\\eta$ distributions is larger at 158 than at 40 GeV/nucleon and decreases slightly with centrality at both energies. Our results are compared to similar studies performed by other experiments both at the CERN SPS and at RHIC.}

Possibility of high efficient beam extraction from the CERN SPS with a bent crystal. Simulation results

Energy Technology Data Exchange (ETDEWEB)

Scandale, W. [CERN, European Organization for Nuclear Research, CH-1211 Geneva 23 (Switzerland); Laboratoire de l' AccelerateurLineaire (LAL), Universite Paris SudOrsay, Orsay (France); INFN Sezione di Roma, Piazzale Aldo Moro 2, 00185 Rome (Italy); Kovalenko, A.D.; Taratin, A.M. [Joint Institute for Nuclear Research, 141980 Dubna, Moscow Region (Russian Federation)

2017-03-11

The extraction of the SPS beam of 270 GeV/c protons assisted by a bent crystal was studied by simulation. Two methods for delivering the SPS beam onto a crystal were considered: transverse diffusion and orbit bump of the beam. It was shown that the main condition for high efficient beam extraction with a bent crystal, which is a small divergence of the incident beam, can be fulfilled. Extraction efficiency up to 99% can be reached for both methods of the beam delivering. The irradiation of the electrostatic septum wires during the beam extraction can be considerably reduced.

Environmental assessment for the Satellite Power System (SPS) Concept Development and Evaluation Program (CDEP). [Microwave and non-microwave health and ecological assessment

Energy Technology Data Exchange (ETDEWEB)

Valentino, A.R.

1980-08-01

In the satellite power system (SPS), satellites in geosynchronous earth orbit would collect solar energy in space, convert it to microwaves, and transmit the microwaves to receiving antennas (rectennas) on earth. At the rectennas, the microwave energy would be converted to electricity. This SPS environmental assessment considers the microwave and nonmicrowave effects on the terrestrial environment and human health, atmospheric effects, and effects on electromagnetic systems. No environmental problem has been identified that would preclude the continued study of SPS technology. To increase the certainty of the assessment, some research has been initiated and long-term research is being planned.

Tilted bending magnet for SPS target area TCC2

CERN Multimedia

CERN PhotoLab

1976-01-01

A slow-extracted proton beam from the SPS goes to the underground target zone TCC2. The part of the primary beam which traverses target T4 is recuperated and transported over some 800 m, for further use in the North Area High Intensity facility (NAHIF). The curved and sloped trajectory required 4 of the bending magnets to be tilted. Here we see one of them being attended by Gilbert Françon in hall 867, ready for installation in TCC2.

Optics measurements and transfer line matching for the SPS injection of the CERN Multi-Turn Extraction beam

CERN Document Server

Benedetto, E; Cettour Cave, S; Follin, F; Gilardoni, S; Giovannozzi, M; Roncarolo, F

2010-01-01

Dispersion and beam optics measurements were carried out in the transfer line between the CERN PS and SPS for the new Multi-Turn Extraction beam. Since the extraction conditions of the four islands and the core are different and strongly dependent on the non-linear effects used to split the beam in the transverse plane, a special care was taken during the measurement campaigns. Furthermore, an appropriate strategy was devised to minimize the overall optical mismatch at SPS injection. All this led to a new optical configuration that will be presented in the paper.

Alignment and girder position of MSE septa in the new LSS4 extraction channel of the SPS

CERN Document Server

Balhan, B; Rizzo, A; Weterings, W; CERN. Geneva. SPS and LHC Division

2002-01-01

For the extraction of the beam from the Super Proton Synchrotron (SPS) to ring 2 of the Large Hadron Collider (LHC) and the CERN Neutrino to Gran Sasso (CNGS)facility, a new fast-extraction system is being constructed in the long straight section LSS4 of the SPS. Besides extraction bumpers, enlarged aperture quadrupoles and extraction kicker magnets (MKE), six conventional DC septum magnets (MSE) are used. These magnets are mounted on a single rigid support girder, pre-aligned so as to follow the trajectory of the extracted beam and optimise the available aperture. The girder has been motorised in order to optimise the local SPS aperture during setting up, so as to avoid the risk of circulating beam impact on the septum coils. In this note, we briefly present the trajectory and apertures of the beam, we describe the calculations and methods that have been used to determine the magnet position on the girder, and finally we report on the details of the girder movement and alignment.

Excitation function of particle production from SIS/Bevalac to SPS energies; evidence for a phase transition?

CERN Document Server

Ströbele, H

2005-01-01

The second part of the title is meant as an incentive to scrutinize the data which will be presented in the following. If the threshold for creating the QGP in nuclear collisions is located in the SPS energy range, it will become evident only by carefully scanning energy and mass dependences of many observables and identifying non monotonous behaviour of several quantities consistently. This contribution, which is a sort of short update of an earlier article, is meant to review the current data on particle production in terms of total yields and ratios, as well transverse and longitudinal kinematical distributions from threshold up to SPS energies.

International collaborative study of the endogenous reference gene, sucrose phosphate synthase (SPS), used for qualitative and quantitative analysis of genetically modified rice.

Science.gov (United States)

Jiang, Lingxi; Yang, Litao; Zhang, Haibo; Guo, Jinchao; Mazzara, Marco; Van den Eede, Guy; Zhang, Dabing

2009-05-13

One rice ( Oryza sativa ) gene, sucrose phosphate synthase (SPS), has been proven to be a suitable endogenous reference gene for genetically modified (GM) rice detection in a previous study. Herein are the reported results of an international collaborative ring trial for validation of the SPS gene as an endogenous reference gene and its optimized qualitative and quantitative polymerase chain reaction (PCR) systems. A total of 12 genetically modified organism (GMO) detection laboratories from seven countries participated in the ring trial and returned their results. The validated results confirmed the species specificity of the method through testing 10 plant genomic DNAs, low heterogeneity, and a stable single-copy number of the rice SPS gene among 7 indica varieties and 5 japonica varieties. The SPS qualitative PCR assay was validated with a limit of detection (LOD) of 0.1%, which corresponded to about 230 copies of haploid rice genomic DNA, while the limit of quantification (LOQ) for the quantitative PCR system was about 23 copies of haploid rice genomic DNA, with acceptable PCR efficiency and linearity. Furthermore, the bias between the test and true values of eight blind samples ranged from 5.22 to 26.53%. Thus, we believe that the SPS gene is suitable for use as an endogenous reference gene for the identification and quantification of GM rice and its derivates.

Installation and management of the SPS and LEP control system computers

International Nuclear Information System (INIS)

Bland, Alastair

1994-01-01

Control of the CERN SPS and LEP accelerators and service equipment on the two CERN main sites is performed via workstations, file servers, Process Control Assemblies (PCAs) and Device Stub Controllers (DSCs). This paper describes the methods and tools that have been developed to manage the file servers, PCAs and DSCs since the LEP startup in 1989. There are five operational DECstation 5000s used as file servers and boot servers for the PCAs and DSCs. The PCAs consist of 90 SCO Xenix 386 PCs, 40 LynxOS 486 PCs and more than 40 older NORD 100s. The DSCs consist of 90 OS-968030 VME crates and 10 LynxOS 68030 VME crates. In addition there are over 100 development systems. The controls group is responsible for installing the computers, starting all the user processes and ensuring that the computers and the processes run correctly. The operators in the SPS/LEP control room and the Services control room have a Motif-based X window program which gives them, in real time, the state of all the computers and allows them to solve problems or reboot them. ((orig.))

SPS measures and possible market access implications for agricultural trade in the Doha Round: An analysis of systemic issues

OpenAIRE

Murali Kallummal

2012-01-01

Even as the Doha Round seeks to address tariff liberalization issues in a comprehensive manner, the imbalance in the outcome of market access for developing country exporters will be particularly glaring in the case of fresh agricultural and processed food products. There is growing evidence that protectionism from the usage of non-tariff barriers such as SPS measures has increased tremendously in the recent past. This paper discusses an analysis of the SPS notifications made by WTO Member co...

The SPS Beam quality monitor, from design to operation

CERN Document Server

Papotti, G; Follin, F; Shaposhnikova, E

2011-01-01

The SPS Beam Quality Monitor is a system that monitors longitudinal beam parameters on a cycle-by-cycle basis and prevents extraction to the LHC in case the specifications are not met. This avoids losses, unnecessary stress of machine protection components and luminosity degradation, additionally helping efficiency during the filling process. The system has been operational since the 2009 LHC run, checking the beam pattern, its correct position with respect to the LHC references, individual bunch lengths and stability. In this paper the algorithms used, the hardware implementation and the operational aspects are presented.

Electrostatic septum for "Continuous Transfer" from PS to SPS

CERN Multimedia

CERN PhotoLab

1982-01-01

For "Continuous Transfer" to the SPS, the PS beam, after acceleration, is peeled off in 5 turns. To minimize losses, the magnetic septa are preceded by an electrostatic septum in straight section 31. We see the inner part of it, on a lab-bench. The first part consists of W-wires, the second part is a Mo-foil. The circulating beam passes through the opening, the ejected beam at the outside (above the wires, in this picture). This assembly is the anode-part, the cathode is not shown.

Expression, purification and preliminary crystallographic analysis of sucrose phosphate synthase (SPS) from Halothermothrix orenii

International Nuclear Information System (INIS)

Huynh, Frederick; Tan, Tien-Chye; Swaminathan, Kunchithapadam; Patel, Bharat K. C.

2004-01-01

The first crystallographic study of a sucrose phosphate synthase from H. orenii, an organism that is both thermophilic and halophilic, is reported. The protein crystal diffracts X-rays to 3.01 Å. This is the first report of the crystallization of a sucrose phosphate synthase (SPS; EC 2.4.1.14). It also constitutes the first study of a sucrose phosphate synthase from a non-photosynthetic thermohalophilic anaerobic bacterium, Halothermothrix orenii. The purified recombinant spsA protein has been crystallized in the monoclinic space group C2, with unit-cell parameters a = 154.2, b = 47.9, c = 72.3 Å, β = 103.16°, using the hanging-drop vapour-diffusion method. The crystal diffracts X-rays to a resolution limit of 3.01 Å. Heavy-metal and halide-soaking trials are currently in progress to solve the structure

Direct Numerical Modeling of E-Cloud Driven Instability of a Bunch Train in the CERN SPS

International Nuclear Information System (INIS)

Vay, J.-L.; Furman, M.A.; Venturini, M.

2011-01-01

The simulation package WARP-POSINST was recently upgraded for handling multiple bunches and modeling concurrently the electron cloud buildup and its effect on the beam, allowing for direct self-consistent simulation of bunch trains generating, and interacting with, electron clouds. We have used the WARP-POSINST package on massively parallel supercomputers to study the buildup and interaction of electron clouds with a proton bunch train in the CERN SPS accelerator. Results suggest that a positive feedback mechanism exists between the electron buildup and the e-cloud driven transverse instability, leading to a net increase in predicted electron density. Electron clouds have been shown to trigger fast growing instabilities on proton beams circulating in the SPS and other accelerators. So far, simulations of electron cloud buildup and their effects on beam dynamics have been performed separately. This is a consequence of the large computational cost of the combined calculation due to large space and time scale disparities between the two processes. We have presented the latest improvements of the simulation package WARP-POSINST for the simulation of self-consistent ecloud effects, including mesh refinement, and generation of electrons from gas ionization and impact at the pipe walls. We also presented simulations of two consecutive bunches interacting with electrons clouds in the SPS, which included generation of secondary electrons. The distribution of electrons in front of the first beam was initialized from a dump taken from a preceding buildup calculation using the POSINST code. In this paper, we present an extension of this work where one full batch of 72 bunches is simulated in the SPS, including the entire buildup calculation and the self-consistent interaction between the bunches and the electrons.

Multiplicity fluctuations of pions and protons at SPS energy – An in ...

Indian Academy of Sciences (India)

but none of them can explain all the datasets simultaneously. ... in a collision, a new parameter named as 'compound multiplicity' (nc = ng + ns ... sion plates by 32S beam with 200 A GeV incident energy at CERN SPS. ... (b) Grey particles: They are mainly fast target recoil protons with energy up to ..... occurs reverse result.

A GIF++ Gamma Irradiation Facility at the SPS H4 Beam Line

CERN Document Server

Capéans-Garrido, M; Linssen, L; Moll, M; Rembser, C

2009-01-01

The current document describes a proposal to implement a new gamma irradiation facility, combined with a high-energy particle beam in the SPS H4 beam line in hall EHN1. This new GIF++ facility is motivated by strong needs from the LHC and sLHC detector and accelerator communities for the tests of LHC components and systems.

SPS RF System Amplifier plant

CERN Multimedia

1977-01-01

The picture shows a 2 MW, 200 MHz amplifier plant with feeder lines. The main RF-system of the SPS comprises four cavities: two of 20 m length and two of 16.5 m length. They are all installed in one long straight section (LSS 3). These cavities are of the travelling-wave type operating at a centre frequency of 200.2 MHz. They are wideband, filling time about 700 ns and untuned. The power amplifiers, using tetrodes are installed in a surface building 200 m from the cavities. Initially only two cavities were installed, a third cavity was installed in 1978 and a forth one in 1979. The number of power amplifiers was also increased: to the first 2 MW plant a second 2 MW plant was added and by end 1979 there were 8 500 kW units combined in pairs to feed each of the 4 cavities with up to about 1 MW RF power, resulting in a total accelerating voltage of about 8 MV. See also 7412016X, 7412017X, 7411048X.

Ionic effects on the uptake of chloromercuribenzene-p-sulphonic acid by pancreatic islets

Energy Technology Data Exchange (ETDEWEB)

Soederberg, M; Taeljedal, I B [Umeaa Univ. (Sweden)

1977-01-01

Effects of inorganic ions on the uptake of chloromercuribenzene-p-sulphonic acid (CMBS) were studied in microdissected pancreatic islets on non-inbred ob/ob-mice. Na/sub 2/SO/sub 4/ stimulated the total islet cell uptake of CMBS but decreased the amount of CMBS remaining in islets after brief washing with L-cysteine. CaCl/sub 2/ stimulated both the total and the cysteine-non-displaceable uptake; the stimulatory effect of CaCl/sub 2/ on the cysteine-non-displaceable CMBS uptake was counteracted by Na/sub 2/SO/sub 4/. NaCl, KCl, or choline chloride had no significant effect on the total islet cell uptake of CMBS, whereas LiCl was stimulatory. It is concluded that ..beta..-cells resemble erythrocytes in having a permeation path for CMBS that is inhibited by SO/sub 4//sup 2 -/. By analogy with existing models of the erythrocyte membrane, it is suggested that the SO/sub 4//sup 2 -/-sensitive path leads to sulphydryl groups controlling monovalent cationic permeability in ..beta..-cells.

Kaon pseudorapidity distribution in pA and AA collisions at AGS and SPS energies

International Nuclear Information System (INIS)

Liu, Fuhu; Zhang, Donghai; Duan, Maiying; Allah, Nabil N. Abd

2003-01-01

We study systematically the kaon pseudorapidity distribution in proton-nucleus and nucleus-nucleus collisions at AGS and SPS energies within the cylinder model. The calculated results are compared and shown to be in agreement with the available experimental data. (author)

The role of veterinary epidemiology and veterinary services in complying with the World Trade Organization SPS agreement.

Science.gov (United States)

Zepeda, C; Salman, M; Thiermann, A; Kellar, J; Rojas, H; Willeberg, P

2005-02-01

The agreement on the application of sanitary and phytosanitary measures (SPS agreement) was one of the major products of the GATT's Uruguay round of multilateral trade negotiations, signed in Marrakesh on 15 April 1994. This agreement and others are part of the treaty that established the World Trade Organization (WTO). The WTO superseded the GATT as the umbrella organization for international trade (WTO, 1998a). The SPS agreement's main intent is to provide guidelines and provisions to member countries to facilitate trade while taking measures to protect human, animal or plant life or health. The agreement dictates that all sanitary measures must be scientifically based and not more restrictive than required to avoid the risk identified. The agreement recommends the use of international standards from the World Organization for Animal Health (OIE), Codex Alimentarius (CAC) and the International Plant Protection Convention (IPPC) as the basis for import requirements. If a country chooses to apply more restrictive measures than those in the international standards, it has to justify its position through a risk analysis, thus avoiding the use of sanitary and phytosanitary measures as unjustified barriers to trade. More than ever, veterinary services worldwide are faced with having to fulfill a crucial role in protecting their country's animal health status, provide sound surveillance information on the occurrence of diseases within their territories, and conduct scientifically valid risk analyses to establish justified import requirements. During the past two decades, most countries have experienced resource reduction in their veterinary services. The effect of these policies has been severe, in many cases leading to an inability of veterinary services to conduct their disease prevention and control duties. There is a clear inconsistency between the demands placed on veterinary services and the current level of funding and support they are receiving, particularly in

Neutral strange particle production at top SPS energy measured by the CERES experiment

International Nuclear Information System (INIS)

Radomski, S.

2006-01-01

Systematics of strange particle production in collisions of ultrarelativistic nuclei provides an insight into the properties of the strongly interacting matter. Hadrochemistry, the study of the relative yields, provides information about chemical freeze-out and the position of the system in the phase diagram. Strangeness production at Super Proton Synchrotron (SPS) energies is not fully explained by the thermal model of hadron gas. Data reported by one experiment show sharp structures as a function of energy which are interpreted as a signature for a phase transition, but due to discrepancies in the results between two different experiments, a conclusion can not be drawn. This thesis is part of an effort to build a database of the strangeness production at SPS energy. The particular subject of this work is a precise measurement of the production of K S 0 . The results are compared with two other experiments and the prediction of the thermal model. The high precision data shed light on the systematics of strangeness production and allow clarification of the experimental status. The study of transverse momentum spectra provides information about the temperature and the radial expansion of the system. Here, as in the case of particle yields, interesting structures are visible as a function of energy. A rapid increase in the number of degrees of freedom is visible in the SPS region. A large part of the strangeness is carried by the neutral strange baryon Λ. Here the experimental situation is even more complicated because the reconstruction of the Λ yield requires large extrapolation to low transverse momentum. In this work first results on Λ production will be presented. (orig.)

Neutral strange particle production at top SPS energy measured by the CERES experiment

Energy Technology Data Exchange (ETDEWEB)

Radomski, S.

2006-07-05

Systematics of strange particle production in collisions of ultrarelativistic nuclei provides an insight into the properties of the strongly interacting matter. Hadrochemistry, the study of the relative yields, provides information about chemical freeze-out and the position of the system in the phase diagram. Strangeness production at Super Proton Synchrotron (SPS) energies is not fully explained by the thermal model of hadron gas. Data reported by one experiment show sharp structures as a function of energy which are interpreted as a signature for a phase transition, but due to discrepancies in the results between two different experiments, a conclusion can not be drawn. This thesis is part of an effort to build a database of the strangeness production at SPS energy. The particular subject of this work is a precise measurement of the production of K{sub S}{sup 0}. The results are compared with two other experiments and the prediction of the thermal model. The high precision data shed light on the systematics of strangeness production and allow clarification of the experimental status. The study of transverse momentum spectra provides information about the temperature and the radial expansion of the system. Here, as in the case of particle yields, interesting structures are visible as a function of energy. A rapid increase in the number of degrees of freedom is visible in the SPS region. A large part of the strangeness is carried by the neutral strange baryon {lambda}. Here the experimental situation is even more complicated because the reconstruction of the {lambda} yield requires large extrapolation to low transverse momentum. In this work first results on {lambda} production will be presented. (orig.)

Design and installation of the MSE septum system in the new LSS4 extraction channel of the SPS

CERN Document Server

Balhan, B; Guinand, R; Luiz, F; Rizzo, A; Weterings, W; CERN. Geneva. AB Department

2003-01-01

For the extraction of the beam from the Super Proton Synchrotron (SPS) to ring 2 of the Large Hadron Collider (LHC) and the CERN Neutrino to Gran Sasso (CNGS) facility, a new fast-extraction system has been installed in the long straight section LSS4 of the SPS. Besides extraction bumpers, enlarged aperture quadrupoles and extraction kicker magnets (MKE), six conventional DC septum magnets (MSE) are used. These magnets are mounted on a single mobile retractable support girder, which is motorised in order to optimise the local SPS aperture during setting up. The MSE septa are connected by a so-called plug-in system to a rigid water-cooled bus bar, which itself is powered by water-cooled cables. In order to avoid destruction of the septum magnet coils by direct impact of the extracted beam, a dilution element (TPSG) has been placed immediately upstream of the first septum coil. The whole system is kept at the required vacuum pressure by ion pumps attached to separate modules (MP). In this note we present the de...

Onset of deconfinement and search for the critical point of strongly interacting matter at CERN SPS energies

CERN Document Server

Rybczyński, Maciej

2014-01-01

The exploration of the QCD phase diagram particularly the search for a phase transition from hadronic to partonic degrees of freedom and possibly a critical endpoint, is one of the most challenging tasks in present heavy-ion physics. As observed by the NA49 experiment, several hadronic observables in central Pb+Pb collisions at the CERN SPS show qualitative changes in their energy dependence. These features are not observed in elementary interactions and indi- cate the onset of a phase transition in the SPS energy range. The existence of a critical point is expected to result in the increase of event-by-event fluctuations of various hadronic observables provided that the freeze-out of the measured hadrons occurs close to its location in the phase di- agram and the evolution of the final hadron phase does not erase the fluctuations signals. Further information about the existence and nature of a phase transition in the SPS energy range can be gained from the studies of event-by-event fluctuations of final stat...

Determination of protein by resonance light scattering technique using dithiothreitol-sodium dodecylbenzene sulphonate as probe

Science.gov (United States)

Wu, Lihang; Mu, Dan; Gao, Dejiang; Deng, Xinyu; Tian, Yuan; Zhang, Hanqi; Yu, Aimin

2009-02-01

The resonance light scattering (RLS) spectra of bovine serum albumin (BSA)-dithiothreitol (DTT)-sodium dodecylbenzene sulphonate (SDBS) and its analytical application were investigated. The RLS intensity of this system can be effectively enhanced in the presence of BSA. Based on the enhanced RLS intensity, a simple assay for BSA was developed. The experimental results indicate that the enhanced RLS intensity is proportional to the concentration of BSA in the range from 1.0 × 10 -8 to 7.5 × 10 -7 mol L -1 with the determination limit of 5.0 × 10 -9 mol L -1. The effects of pH, concentration of SDBS and DTT on the RLS enhancement were discussed. Most metal ions have little interference on the determination of BSA. Some synthetic and real samples were analyzed, and the results obtained were in good agreement with those obtained by Bradford method.

Interface evolution and shear strength of Al/Ti bi-metals processed by a spark plasma sintering (SPS) apparatus

Energy Technology Data Exchange (ETDEWEB)

Miriyev, Aslan, E-mail: aslan.miriyev@columbia.edu [Department of Mechanical Engineering, Columbia University in the City of New York, 500 W. 120th St., Mudd 220, New York, NY 10027 (United States); Levy, Asaf; Kalabukhov, Sergey; Frage, Nachum [Department of Materials Engineering, Ben-Gurion University of the Negev, P.O.B. 653, Beer Sheva 8410501 (Israel)

2016-09-05

Microstructural evolution of the Al/Ti bi-metal interface during heat treatment in a spark plasma sintering (SPS) apparatus was investigated under various conditions for the first time. A mechanism of interfacial layer growth was suggested based on the results of SEM, TEM and X-ray diffraction analysis. A continuous TiAl{sub 3} intermetallic layer was formed at the Al/Ti interface even after a processing time as short as about a minute. The TiAl{sub 3} layer grew mainly into the Ti part, while only a few individual grains grew into the Al part. Evolution of the interlayer was determined by Al diffusion through the (TiAl{sub 3}/TiAl{sub 3}) grain boundary. The activation energy of the process was 140 kJ/mol. The shear strength of the interface in the Al/Ti bi-metal was determined after various heat treatments. The shear strength of the bi-metal was limited by the properties of aluminum, with no effect of interlayer thickness or current mode and pulse pattern of the SPS treatment being detected. - Highlights: • Spark plasma sintering apparatus was used for heat treatment of Al/Ti bi-metals. • Microstructural evolution of Al/Ti interface during SPS treatment was investigated. • A continuous TiAl{sub 3} intermetallic layer was formed at the Al/Ti interface. • The bi-metal shear strength was limited by the properties of pure aluminum. • No effect of TiAl{sub 3} thickness or SPS current mode and pulse pattern was detected.

Angelo State SPS Marsh White Award: Physics After School Special (P.A.S.S.)

Science.gov (United States)

Desai, Vikesh; Sauncy, Toni

2012-03-01

With a recent Marsh White Award from the SPS National Office, the Angelo State SPS has teamed up with a local YMCA after school program to provide fun lab experiences for the diverse group of K-3^rd graders. Several undergraduate presenters are involved, and the funding was used to purchase tshirts for all participants. The afterschool group of approximately 30 children has visited the campus for the first lab session and plans three additional hands on lab experiences over the course of the semester. For the final visit, the Peer Pressure Team will conduct a full demonstration show and P.A.S.S. Party. The goal of this public engagement is to motivate these young students to learn more about physics with hands on activities in a fun and safe environment and to establish meaningful mentoring relationships between undergraduate physics majors and younger students.

An FPGA Based Multiprocessing CPU for Beam Synchronous Timing in CERN's SPS and LHC

CERN Document Server

Ballester, F J; Gras, J J; Lewis, J; Savioz, J J; Serrano, J

2003-01-01

The Beam Synchronous Timing system (BST) will be used around the LHC and its injector, the SPS, to broadcast timing meassages and synchronize actions with the beam in different receivers. To achieve beam synchronization, the BST Master card encodes messages using the bunch clock, with a nominal value of 40.079 MHz for the LHC. These messages are produced by a set of tasks every revolution period, which is every 89 us for the LHC and every 23 us for the SPS, therefore imposing a hard real-time constraint on the system. To achieve determinism, the BST Master uses a dedicated CPU inside its main Field Programmable Gate Array (FPGA) featuring zero-delay hardware task switching and a reduced instruction set. This paper describes the BST Master card, stressing the main FPGA design, as well as the associated software, including the LynxOS driver and the tailor-made assembler.

An evaluation of UO2-CNT composites made by SPS as an accident tolerant nuclear fuel pellet and the feasibility of SPS as an economical fabrication process for the nuclear fuel cycle

Science.gov (United States)

Cartas, Andrew R.

The innovative and advanced purpose of this study is to understand and establish proper sintering procedures for Spark Plasma Sintering process in order to fabricate high density, high thermal conductivity UO2 -CNT pellets. Mixing quality and chemical reactions have been investigated by field emission scanning electron microscopy (FESEM), wavelength dispersive spectroscopy (WDS), and X-ray diffraction (XRD). The effect of various types of CNTs on the mixing and sintering quality of UO2-CNT pellets with SPS processing have been examined. The Archimedes Immersion Method, laser flash method, and FE-SEM will be used to investigate the density, thermal conductivity, grain size, pinning effects, and CNT dispersion of fabricated UO2-CNT pellets. Pre-fabricated CNT's were added to UO 2 powder and dispersed via sonication and/or ball milling and then made into composite nuclear pellets. An investigation of the economic impact of SPS on the nuclear fuel cycle for producing pure and composite UO2 fuels was conducted.

Transverse studies with ions at SPS flat bottom

CERN Document Server

Antoniou, F; Saa Hernandez, A; Huschauer, A

2017-01-01

The LHC injectors upgrade project (LIU) aims at con-solidating and upgrading the existing accelerator chain atCERN in view of the increased beam performance requiredfor the High Luminosity LHC (HL-LHC) project. For theion chain, the losses and emittance growth in the SPS imposepresently the main performance limitation. The significantbeam degradation encountered on the long injection plateauhas been studied during the 2016 MD runs with Pb82+. Inthis report we present the systematic measurements of emit-tance, bunch length and transmission performed along theinjection plateau for different bunch intensities. We present,as well, static and dynamic tune scans for the optimizationof the working point and measurement of the loss rate atcloseby resonances.

Was a new phase of nuclear matter observed at CERN SPS...?

International Nuclear Information System (INIS)

Odyniec, G.

2001-01-01

The enhanced production of strange particles, that was predicted as a consequence of the formation of quark-gluon plasma, was observed in CERN SPS heavy ion experiments. As data matured, the emphasis on theory and interpretation of experimental results has increased. In this presentation the hadronic yields and their ratios, as well as the role of strangeness production in the search for a new phase of matter, in both experiment and theory, are discussed. (author)

Self-Consistant Numerical Modeling of E-Cloud Driven Instability of a Bunch Train in the CERN SPS

International Nuclear Information System (INIS)

Vay, J.-L.; Furman, M.A.; Secondo, R.; Venturini, M.; Fox, J.D.; Rivetta, C.H.

2010-01-01

The simulation package WARP-POSINST was recently upgraded for handling multiple bunches and modeling concurrently the electron cloud buildup and its effect on the beam, allowing for direct self-consistent simulation of bunch trains generating, and interacting with, electron clouds. We have used the WARP-POSINST package on massively parallel supercomputers to study the growth rate and frequency patterns in space-time of the electron cloud driven transverse instability for a proton bunch train in the CERN SPS accelerator. Results suggest that a positive feedback mechanism exists between the electron buildup and the e-cloud driven transverse instability, leading to a net increase in predicted electron density. Comparisons to selected experimental data are also given. Electron clouds have been shown to trigger fast growing instabilities on proton beams circulating in the SPS and other accelerators. So far, simulations of electron cloud buildup and their effects on beam dynamics have been performed separately. This is a consequence of the large computational cost of the combined calculation due to large space and time scale disparities between the two processes. We have presented the latest improvements of the simulation package WARP-POSINST for the simulation of self-consistent ecloud effects, including mesh refinement, and generation of electrons from gas ionization and impact at the pipe walls. We also presented simulations of two consecutive bunches interacting with electrons clouds in the SPS, which included generation of secondary electrons. The distribution of electrons in front of the first beam was initialized from a dump taken from a preceding buildup calculation using the POSINST code. In this paper, we present an extension of this work where one full batch of 72 bunches is simulated in the SPS, including the entire buildup calculation and the self-consistent interaction between the bunches and the electrons. Comparisons to experimental data are also given.

A Facility to Search for Hidden Particles (SHiP) at the CERN SPS

CERN Document Server

Anelli, M.; Arduini, G.; Back, J.J.; Bagulya, A.; Baldini, W.; Baranov, A.; Barker, G.J.; Barsuk, S.; Battistin, M.; Bauche, J.; Bay, A.; Bayliss, V.; Bellagamba, L.; Bencivenni, G.; Bertani, M.; Bezshyyko, O.; Bick, D.; Bingefors, N.; Blondel, A.; Bogomilov, M.; Boyarsky, A.; Bonacorsi, D.; Bondarenko, D.; Bonivento, W.; Borburgh, J.; Bradshaw, T.; Brenner, R.; Breton, D.; Brook, N.; Bruschi, M.; Buonaura, A.; Buontempo, S.; Cadeddu, S.; Calcaterra, A.; Calviani, M.; Campanelli, M.; Capoccia, C.; Cecchetti, A.; Chatterjee, A.; Chauveau, J.; Chepurnov, A.; Chernyavskiy, M.; Ciambrone, P.; Cicalo, C.; Conti, G.; Cornelis, K.; Courthold, M.; Dallavalle, M.G.; D'Ambrosio, N.; De Lellis, G.; De Serio, M.; Dedenko, L.; Di Crescenzo, A.; Di Marco, N.; Dib, C.; Dietrich, J.; Dijkstra, H.; Domenici, D.; Donskov, S.; Druzhkin, D.; Ebert, J.; Egede, U.; Egorov, A.; Egorychev, V.; Alaoui, M. A. El; Enik, T.; Etenko, A.; Fabbri, F.; Fabbri, L.; Fedorova, G.; Felici, G.; Ferro-Luzzi, M.; Fini, R.A.; Franke, M.; Fraser, M.; Galati, G.; Giacobbe, B.; Goddard, B.; Golinka-Bezshyyko, L.; Golubkov, D.; Golutvin, A.; Gorbunov, D.; Graverini, E.; Grenard, J-L; Guler, A.M.; Hagner, C.; Hakobyan, H.; Helo, J.C.; van Herwijnen, E.; Horvath, D.; Iacovacci, M.; Iaselli, G.; Jacobsson, R.; Kadenko, I.; Kamiscioglu, M.; Kamiscioglu, C.; Khaustov, G.; Khotjansev, A.; Kilminster, B.; Kim, V.; Kitagawa, N.; Kodama, K.; Kolesnikov, A.; Kolev, D.; Komatsu, M.; Konovalova, N.; Koretskiy, S.; Korolko, I.; Korzenev, A.; Kovalenko, S.; Kudenko, Y.; Kuznetsova, E.; Lacker, H.; Lai, A.; Lanfranchi, G.; Lauria, A.; Lebbolo, H.; Levy, J. -M.; Lista, L.; Loverre, P.; Lukiashin, A.; Lyubovitskij, V.E.; Malinin, A.; Manfredi, M.; Perillo-Marcone, A.; Marrone, A.; Matev, R.; Messomo, E.N.; Mermod, P.; Mikado, S.; Mikhaylov, Yu.; Miller, J.; Milstead, D.; Mineev, O.; Mingazheva, R.; Mitselmakher, G.; Miyanishi, M.; Monacelli, P.; Montanari, A.; Montesi, M.C.; Morello, G.; Morishima, K.; Movtchan, S.; Murzin, V.; Naganawa, N.; Naka, T.; Nakamura, M.; Nakano, T.; Nurakhov, N.; Obinyakov, B.; Ocalan, K.; Ogawa, S.; Oreshkin, V.; Orlov, A.; Osborne, J.; Pacholek, P.; Panman, J.; Paoloni, A.; Paparella, L.; Pastore, A.; Patel, M.; Petridis, K.; Petrushin, M.; Poli-Lener, M.; Polukhina, N.; Polyakov, V.; Prokudin, M.; Puddu, G.; Pupilli, F.; Rademakers, F.; Rakai, A.; Rawlings, T.; Redi, F.; Ricciardi, S.; Rinaldesi, R.; Roganova, T.; Rogozhnikov, A.; Rokujo, H.; Romaniouk, A.; Rosa, G.; Rostovtseva, I.; Rovelli, T.; Ruchayskiy, O.; Ruf, T.; Saitta, G.; Samoylenko, V.; Samsonov, V.; Ull, A. Sanz; Saputi, A.; Sato, O.; Schmidt-Parzefall, W.; Serra, N.; Sgobba, S.; Shaposhnikov, M.; Shatalov, P.; Shaykhiev, A.; Shchutska, L.; Shevchenko, V.; Shibuya, H.; Shitov, Y.; Silverstein, S.; Simone, S.; Skorokhvatov, M.; Smirnov, S.; Solodko, E.; Sosnovtsev, V.; Spighi, R.; Spinetti, M.; Starkov, N.; Storaci, B.; Strabel, C.; Strolin, P.; Takahashi, S.; Teterin, P.; Tioukov, V.; Tommasini, D.; Treille, D.; Tsenov, R.; Tshchedrina, T.; Ustyuzhanin, A.; Vannucci, F.; Venturi, V.; Villa, M.; Vincke, Heinz; Vincke, Helmut; Vladymyrov, M.; Xella, S.; Yalvac, M.; Yershov, N.; Yilmaz, D.; Yilmazer, A.U.; Vankova-Kirilova, G.; Zaitsev, Y.; Zoccoli, A.; CERN. Geneva. SPS and PS Experiments Committee; SPSC

2015-01-01

A new general purpose fixed target facility is proposed at the CERN SPS accelerator which is aimed at exploring the domain of hidden particles and make measurements with tau neutrinos. Hidden particles are predicted by a large number of models beyond the Standard Model. The high intensity of the SPS 400~GeV beam allows probing a wide variety of models containing light long-lived exotic particles with masses below ${\\cal O}$(10)~GeV/c$^2$, including very weakly interacting low-energy SUSY states. The experimental programme of the proposed facility is capable of being extended in the future, e.g. to include direct searches for Dark Matter and Lepton Flavour Violation. The facility will be serviced by a new dedicated beam line branched off the splitter section on the North Area. It is followed by a new target station and a magnetic shield to suppress beam induced background. The proposed orientation of the beam line and the underground complex allows reserving more than 100~m of space beyond the experiment...

ACANTHAMOEBA SP.S-11 PHAGOCYTOTIC ACTIVITY ON MYCOBACTERIUM LEPRAE IN DIFFERENT NUTRIENT CONDITIONS.

Science.gov (United States)

Paling, Sepling; Wahyuni, Ratna; Ni'matuzahroh; Winarni, Dwi; Iswahyudi; Astari, Linda; Adriaty, Dinar; Agusni, Indropo; Izumi, Shinzo

2018-01-01

Mycobacterium leprae ( M. leprae ) is a pathogenic bacterium that causes leprosy. The presence of M. leprae in the environment is supported by microorganisms that act as the new host for M. leprae . Acanthamoeba 's potential to be a host of M. leprae in the environment. Acanthamoeba sp. is Free Living Amoeba (FLA) that classified as holozoic, saprophytic, and saprozoic. The existence of nutrients in the environment influence Acanthamoeba ability to phagocytosis or pinocytosis. This study is aimed to determine Acanthamoeba sp.S-11 phagocytic activity to Mycobacterium leprae ( M. leprae ) which cultured in non-nutrient media and riched-nutrient media. This research conducted by culturing Acanthamoeba sp.S-11 and M. leprae on different nutrient media conditions. M. leprae intracellular DNA were isolated and amplified by M. leprae specific primers through Real Time PCR (Q-PCR). The results showed that Acanthamoeba co-cultured on non-nutrient media were more active to phagocyte M. leprae than on rich-nutrient media. The use of non-nutrient media is recommended to optimize Acanthamoeba sp. phagocytic activity to M. leprae .

Effect of the Various Impedances on Longitudinal Beam Stability in the CERN SPS

CERN Document Server

Lasheen, Alexandre; Repond, Joël; Shaposhnikova, Elena

2016-01-01

The High Luminosity (HL)-LHC project at CERN aims at a luminosity increase by a factor ten and one of the necessary ingredients is doubling the bunch intensity to 2.4x10¹¹ ppb for beams with 25 ns bunch spacing. Many improvements are already foreseen in the frame of the LHC Injector Upgrade (LIU) project, but probably this intensity would still not be reachable in the SPS due to longitudinal instabilities. Recently a lot of effort went into finding the impedance sources of the instabilities. Particle simulations based on the latest SPS impedance model are now able to reproduce the measured instability thresholds and were used to determine the most critical impedance sources by removing them one by one from the model. It was found that impedance of vacuum flanges and of the already damped 630 MHz HOM of the main RF system gave for 72 bunches the comparable intensity thresholds. Possible intensity gains are defined for realistic impedance modifications and for various beam configurations (number of bunches, l...

A Novel Eddy Current Septum Magnet for SPS Extraction towards LHC and CNGS

CERN Document Server

Schröder, G H; Carlier, E; Dieperink, J H; Ducimetière, L; Goddard, B; Lázár, C; Mayer, M; Vossenberg, Eugène B; Weterings, W

2000-01-01

A new East Fast-Extraction System is under construction in the SPS, to supply particles with a maximum batch length of 7.8 us and 10.5 us to the LHC and to CNGS (CERN Neutrino to Gran Sasso), respectively. The extraction septum magnets actually used at the SPS have been designed for slow extraction over several seconds, have large cooling and electrical power demands and need frequently maintenance in a high radiation environment. A fast system of only 250 us pulse duration has therefore been developed, using a half-sine excitation pulse with a superimposed third harmonic. The short pulse duration requires very thin magnetic yoke laminations, which can not easily be stamped and stacked. Profiting from a development for the LHC beam dump kicker magnets, the yoke is therefore built-up from tape-wound cylindrical cores, employing 50 um thick Si-steel tape. Thirty two cores are stacked longitudinally to produce a yoke of 3.2 meter length. The aperture is cut radial into each cylinder. The cores are radial compres...

Candidate solar cell materials for photovoltaic conversion in a solar power satellite /SPS/

Science.gov (United States)

Glaser, P. E.; Almgren, D. W.

1978-01-01

In recognition of the obstacles to solar-generated baseload power on earth, proposals have been made to locate solar power satellites in geosynchronous earth orbit (GEO), where solar energy would be available 24 hours a day during most of the time of the year. In an SPS, the electricity produced by solar energy conversion will be fed to microwave generators forming part of a planar phase-array transmitting antenna. The antenna is designed to precisely direct a microwave beam of very low intensity to one or more receiving antennas at desired locations on earth. At the receiving antenna, the microwave energy will be safely and efficiently reconverted to electricity and then be transmitted to consumers. An SPS system will include a number of satellites in GEO. Attention is given to the photovoltaic option for solar energy conversion in GEO, solar cell requirements, the availability of materials, the implication of large production volumes, requirements for high-volume manufacture of solar cell arrays, and the effects of concentration ratio on solar cell array area.

Non-local Fast Extraction from the CERN SPS at 100 and 440 GeV

CERN Document Server

Velotti, F M; Bartmann, W; Carlier, E; Cornelis, K; Efthymiopoulos, I; Goddard, B; Jensen, L K; Kain, V; Kowalska, M; Mertens, V; Steerenberg, R

2013-01-01

The Long Straight Section 2 (LSS2) of the CERN SPS is connected with the North Area (NA), to which the beam to date has always been extracted using a resonant extraction technique. For new proposed short- and long-baseline neutrino experiments, a fast single turn extraction to this experimental area is required. As there are no kickers in LSS2, and the integration of any new kickers with the existing electrostatic septum would be problematic, a solution has been developed to fast extract the beam using non-local extraction with other SPS kickers. Two different kicker systems have been used, the injection kicker in LSS1 and the stronger extraction kicker in LSS6 to extract 100 and 440 GeV beam, respectively. For both solutions a large emittance beam was extracted after 5 or 9 full betatron periods. The concept and simulation details are presented with the analysis of the aperture and beam loss considerations and experimental results collected during a series of beam tests.

Performance Evaluation of the SPS Scraping System in View of the High Luminosity LHC

CERN Document Server

AUTHOR|(SzGeCERN)659273; Cerutti, Francesco

Injection in the LHC is a delicate moment, since the LHC collimation system cannot offer adequate protection during beam transfer. For this reason, a complex chain of injection protection devices has been put in place. Among them, the SPS scrapers are the multi-turn cleaning system installed in the SPS aimed at halo removal immediately before injection in the LHC. The upgrade in luminosity of the LHC foresees beams brighter than those currently available in machine, posing serious problems to the performance of the existing injection protection systems. In particular, the integrity of beam-intercepting devices is challenged by unprecedented beam parameters, leading to interactions potentially destructive. In this context, a new design of scrapers has been proposed, aimed at improved robustness and performance. This thesis compares the two scraping systems, i.e. the existing one and the one proposed for upgrade. Unlike any other collimation system for regular halo cleaning, both are "fast" systems, characteris...

TMCI thresholds for LHC single bunches in the CERN SPS and comparison with simulations

CERN Document Server

Bartosik, H; Papaphilippou, Y; Rumolo, G; Salvant, B; Zannini, C

2014-01-01

At the beginning of 2013 an extensive measurement campaign was carried out at the SPS in order to determine the Transverse Mode Coupling Instability thresholds of LHC-type bunches in a wide range of intensities and longitudinal emittances. The measurements were performed in two different configurations of machine optics (nominal and low gamma transition) with the goal to characterize the differences in behavior and performance. The purpose of this paper is to describe in detail the measurement procedure and results, as well as the comparison of the experimental data with HEADTAIL simulations based on the latest SPS impedance model. Beside the impedances of the resistive wall, the beam position monitors (BPMs), the RF cavities, and the flanges, an advanced model of the impedance of the kicker magnets is included, which are found to play a major role in the definition of the stability region of the LHC-type bunches in the two optics configurations studied.

Hyperon production at the CERN SPS:results from the NA57 experiment

Czech Academy of Sciences Publication Activity Database

Antinori, F.; Bacon, P. A.; Badala, A.; Staroba, Pavel; Závada, Petr

2004-01-01

Roč. 30, - (2004), S129-S138 ISSN 0954-3899 Institutional research plan: CEZ:AV0Z1010920 Keywords : ultra-relativistic heavy-ion beams * CERN SPS * hadronic matter * energy density * colour deconfined state of matter * Pb-Pb collisions at 160 A GeV/c * mid-rapidity * strangeness enhancment Subject RIV: BF - Elementary Particles and High Energy Physics Impact factor: 1.533, year: 2004

The PS Booster, PS and SPS Magnets for the next 25 years

CERN Document Server

Tommasini, D

2010-01-01

This note provides information and analysis on the present status of the magnets installed in the CERN Proton Synchrotron Booster (PSB), the Proton Synchrotron (PS) and the Super Proton Synchrotron (SPS) in view of their possible operation for the next 25 years. The note does not cover the magnets installed in the transfer lines, neither it covers the fast injection/extraction magnets (septa and kickers).

SPS/LEP beam transfer equipment control using industrial automation components

International Nuclear Information System (INIS)

Aimar, A.; Berard, G.; Bretin, J.L.; Carlier, E.; Dieperink, J.H.; Laffin, M.; Mertens, V.; Verhagen, H.

1992-01-01

Several control systems for SPS and LEP beam transfer equipment have to be commissioned in the near future. Tools for fast software development, easy maintenance and modifications, compliance with industrial standards, and independence of specific suppliers are considered to be essential. A large fraction of the systems can be realized using off-the-shelf industrial automation components like industrial I/O systems, programmable logic controllers, or diskless PCs. Specific electronics built up in G-64 can be integrated. Diskless systems running UNIX and X Windows are foreseen as process controllers and local access media. (author)

Implementation of Carbon Thin Film Coatings in the Super Proton Synchrotron (SPS) for Electron Cloud Mitigation

CERN Document Server

Costa Pinto, P; Basso, T; Edwards, P; Mensi, M; Sublet, A; Taborelli, M

2014-01-01

Low Secondary Electron Yield (SEY) carbon thin films eradicate electron multipacting in accelerator beam pipes. Two magnetic cells of the SPS were coated with such material and installed. In total more than forty vacuum vessels and magnet interconnections were treated. The feasibility of the coating process was validated. The performance of the carbon thin film will be tested with LHC nominal beams after the end of the long shutdown 1. Particular attention will be drawn to the long term behaviour. This paper presents the sputtering techniques used to coat the different components; their characterization (SEY measurements on coupons, RF multipacting tests and pump down curves); and the technology to etch the carbon film in case of a faulty coating. The strategy to coat the entire SPS will also be described.

Sulphonated cobalt phthalocyanine-MCM-41: An active photocatalyst for degradation of 2,4-dichlorophenol

Energy Technology Data Exchange (ETDEWEB)

Zanjanchi, M.A., E-mail: zanjanchi@guilan.ac.ir [Department of Chemistry, Faculty of Science, University of Guilan, P.O. Box 1914, Namjoo St., Rasht 41335 (Iran, Islamic Republic of); Ebrahimian, A.; Arvand, M. [Department of Chemistry, Faculty of Science, University of Guilan, P.O. Box 1914, Namjoo St., Rasht 41335 (Iran, Islamic Republic of)

2010-03-15

The photocatalytic activity of sulphonated cobalt phthalocyanine immobilized onto MCM-41 was investigated for decomposition of 2,4-dichlorophenol (2,4-DCP) in aqueous solutions. Immobilization of anion sulpho-cobalt phthalocyanine to the walls of MCM-41 was performed by pre-anchorage of 3-(aminopropyl)-triethoxysilane (APTES) onto MCM-41 via post-synthesis method. X-ray diffraction, nitrogen physisorption, diffuse reflectance spectroscopy, energy-dispersive X-ray and FT-IR methods were used to characterize the product. Photocatalytic efficiency of the prepared catalyst for degradation of 2,4-DCP was tested under illumination of UV-A and visible light. The results obtained reveal that the photocatalyst is very active in degradation of 2,4-DCP. The photodegradation process is completed within 3 h using a dose of 0.6 g/L of the catalyst under UV irradiation. The reactions follow a pseudo-first-order kinetics and the observed rate constant values change with 2,4-DCP concentrations. The reproducibility of the catalyst was tested. The reaction intermediates were identified by gas chromatoghraphy-mass spectrometery (GC-MS) technique.

Lithiated and sulphonated poly(ether ether ketone) solid state electrolyte films for supercapacitors

Energy Technology Data Exchange (ETDEWEB)

Chiu, K.-F.; Su, S.-H., E-mail: minimono42@gmail.com

2013-10-01

Poly(ether ether ketone) (PEEK) films have been synthesised and used as solid-state electrolytes for supercapacitors. In order to increase their ion conductivity, the PEEK films were sulphonated by sulphuric acid, and various amounts of LiClO{sub 4} were added. The solid-state electrolyte films were characterised by Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and thermogravimetric analysis. The ionic conductivities of the electrolyte films were analysed by performing electrochemical impedance spectroscopy. The obtained electrolyte films can be sandwiched or directly coated on activated carbon electrodes to form solid-state supercapacitors. The electrochemical characteristics of these supercapacitors were investigated by performing cyclic voltammetry and charge–discharge tests. Under an optimal content of LiClO{sub 4}, the supercapacitor can provide a capacitance as high as 190 F/g. After 1000 cycles, the supercapacitors show almost no capacitance fading, indicating high stability of the solid-state electrolyte films. - Highlights: • Poly(ether ether ketone) (PEEK) films have been used as solid-state electrolytes. • LiClO4 addition can efficiently improve the ionic conductivity. • Supercapacitors using PEEK electrolyte films deliver high capacitance.

Biodiesel Derive Bio-oil of Hermetia illucens Pre-pupae Catalysed by Sulphonated Biochar

Directory of Open Access Journals (Sweden)

Leong Siew Yoong

2018-01-01

Full Text Available This study investigates the development of biochar catalyst from bamboo applied for biodiesel synthesis. A non-conventional biodiesel feedstock was used in the in-situ transesterification reaction. This non-conventional feedstock is obtained from an insect’s fly, the Hermetia illucens fly. Biochar derived from bamboo has been investigated as a promising catalyst for biodiesel synthesis. The biochar acid catalysts were prepared by sulphonation via impregnation with concentrated sulphuric acid. The prepared catalysts were investigated for their performance to catalyse in-situ transesterification via ultra-sonication of Hermetia illucens bio-oil. The effects of carbonisation time (1 hour and 2 hour and temperature (400°C, 500°C and 600°C as well as catalyst loading (5-20 wt% on oil basis on the transesterification yield were studied. Result showed that the highest yield of FAME obtained was 95.6% with catalyst loading of 15 wt% carbonized at 500°C for 2 hours. Sharp band of methyl ester functional groups were observed in the FTIR spectra at 1735-1750cm-1. The composition of this methyl ester was further deduced using gas chromatography and the fatty acid was predominantly lauric acid.

Biodiesel Derive Bio-oil of Hermetia illucens Pre-pupae Catalysed by Sulphonated Biochar

Science.gov (United States)

Yoong Leong, Siew; Chong, Soo Shin; Chin, Kah Seng

2018-03-01

This study investigates the development of biochar catalyst from bamboo applied for biodiesel synthesis. A non-conventional biodiesel feedstock was used in the in-situ transesterification reaction. This non-conventional feedstock is obtained from an insect's fly, the Hermetia illucens fly. Biochar derived from bamboo has been investigated as a promising catalyst for biodiesel synthesis. The biochar acid catalysts were prepared by sulphonation via impregnation with concentrated sulphuric acid. The prepared catalysts were investigated for their performance to catalyse in-situ transesterification via ultra-sonication of Hermetia illucens bio-oil. The effects of carbonisation time (1 hour and 2 hour) and temperature (400°C, 500°C and 600°C) as well as catalyst loading (5-20 wt% on oil basis) on the transesterification yield were studied. Result showed that the highest yield of FAME obtained was 95.6% with catalyst loading of 15 wt% carbonized at 500°C for 2 hours. Sharp band of methyl ester functional groups were observed in the FTIR spectra at 1735-1750cm-1. The composition of this methyl ester was further deduced using gas chromatography and the fatty acid was predominantly lauric acid.

Lithiated and sulphonated poly(ether ether ketone) solid state electrolyte films for supercapacitors

International Nuclear Information System (INIS)

Chiu, K.-F.; Su, S.-H.

2013-01-01

Poly(ether ether ketone) (PEEK) films have been synthesised and used as solid-state electrolytes for supercapacitors. In order to increase their ion conductivity, the PEEK films were sulphonated by sulphuric acid, and various amounts of LiClO 4 were added. The solid-state electrolyte films were characterised by Fourier transform infrared spectroscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, and thermogravimetric analysis. The ionic conductivities of the electrolyte films were analysed by performing electrochemical impedance spectroscopy. The obtained electrolyte films can be sandwiched or directly coated on activated carbon electrodes to form solid-state supercapacitors. The electrochemical characteristics of these supercapacitors were investigated by performing cyclic voltammetry and charge–discharge tests. Under an optimal content of LiClO 4 , the supercapacitor can provide a capacitance as high as 190 F/g. After 1000 cycles, the supercapacitors show almost no capacitance fading, indicating high stability of the solid-state electrolyte films. - Highlights: • Poly(ether ether ketone) (PEEK) films have been used as solid-state electrolytes. • LiClO4 addition can efficiently improve the ionic conductivity. • Supercapacitors using PEEK electrolyte films deliver high capacitance

Travelling Wave Structure of an SPS RF Cavity

CERN Multimedia

CERN PhotoLab

1974-01-01

The RF cavities for acceleration of particles in the SPS have a travelling-wave structure. They operate at a fixed frequency of 200 MHz (h = 4620). With a quality factor of Q = 100, the bandwidth covers the small frequency swing for the acceleration of protons from as low as 10 GeV to the top energy of 450 GeV. Later on, for the acceleration of ions, with a larger frequency swing, turn-to-turn phase jumps did the trick. Two cavities, each consisting of 5 tank sections, were installed in long straight section 3. Each cavity is driven by a power amplifier of 750 kW CW (1 MW pulsed). Another 2 cavities were added later on. See also 7411033 and 7802190.

Experience with the control system for the SPS

International Nuclear Information System (INIS)

Crowley-Milling, M.C.

1978-01-01

The design of the multicomputer control system for the 400 GeV Super Proton Synchrotron (SPS) at CERN was described in the report CERN 75-20, issued in 1975, before the commissioning of the accelerator. The present report, which should be read in conjunction with the earlier one, describes the modification made to the system in the light of experience, and how it has adapted to changing requirements. Reliability of the system and how it has adapted to changing requirements. Reliability of the system and of its components is discussed. Taking into account modern developments of microprocessors, etc., the changes that might be made if the system were to be redesigned are examined. Finally, the application of the design philosophy to other fields is discussed briefly. (Auth.)

Stopping, heating, thermalization and expansion at SPS energies

CERN Document Server

Gaardhoje, J J

1997-01-01

The Pb beam at 158AGeV from the CERN SPS accelerator which was taken into use in the fall of 1994 has opened a new dimension in the study of highly excited nuclear matter in heavy ion reactions. It has now become possible to form reasonably large volumes (containing more than 300 nucleons) in central collisions between heavy ions, with energy and matter densities in some parts of the volume exceeding those expected for the phase transition from hadronic matter to deconfined quark and gluon matter. In this talk we discuss some features of the expansion of the hot and compressed system that may be learned by analysing the single particle spectra of baryons and mesons with emphasis on data from the NA44 experiment.

Beam Quality Preservation in the CERN PS-SPS Complex

CERN Multimedia

Arduini, Gianluigi

2004-01-01

The LHC will require beams of unprecedented transverse and longitudinal brightness. Their production imposes tight constraints on the emittance growth in each element of the LHC injector chain, namely the PS-SPS Accelerator Complex. The problems encountered at the different stages of the acceleration in the complex span a wide range of topics, such as injection matching, RF gymnastics, space charge, transverse and longitudinal single- and coupled-bunch instabilities, and electron cloud effects. The measurement techniques developed and applied to identify and study the various sources of emittance dilution to the high precision required for the LHC beams and the solutions found to control such phenomena are illustrated.

Beam Transfer Line Design for a Plasma Wakefield Acceleration Experiment (AWAKE) at the CERN SPS

CERN Document Server

Bracco, C; Brethoux, D; Clerc, V; Goddard, B; Gschwendtner, E; Jensen, L K; Kosmicki, A; Le Godec, G; Meddahi, M; Muggli, P; Mutin, C; Osborne, O; Papastergiou, K; Pardons, A; Velotti, F M; Vincke, H

2013-01-01

The world’s first proton driven plasma wakefield acceleration experiment (AWAKE) is presently being studied at CERN. The experimentwill use a high energy proton beam extracted from the SPS as driver. Two possible locations for installing the AWAKE facility were considered: the West Area and the CNGS beam line. The previous transfer line from the SPS to the West Area was completely dismantled in 2005 and would need to be fully re-designed and re-built. For this option, geometric constraints for radiation protection reasons would limit the maximum proton beam energy to 300 GeV. The existing CNGS line could be used by applying only minor changes to the lattice for the final focusing and the interface between the proton beam and the laser, required for plasma ionisation and bunch-modulation seeding. The beam line design studies performed for the two options are presented.

CERN : Nouveaux records lors d'une période d'exploitation au PS/SPS ; Un nouveau rôle pour les ISR ; Deuxième région d'intersection pour le système pp du SPS ; Détermination de la durée de vie du charme ; Calcul en Sicile et au CERN

CERN Multimedia

1979-01-01

CERN : Nouveaux records lors d'une période d'exploitation au PS/SPS ; Un nouveau rôle pour les ISR ; Deuxième région d'intersection pour le système pp du SPS ; Détermination de la durée de vie du charme ; Calcul en Sicile et au CERN

Photon production in relativistic nuclear collisions at SPS and RHIC energies

CERN Document Server

Turbide, S; Rapp, R; 10.1142/S0217751X0402258X

2004-01-01

Chiral Lagrangians are used to compute the production rate of photons from the hadronic phase of relativistic nuclear collisions. Special attention is paid to the role of the a/sub 1/ pseudovector. Calculations that include strange meson reactions, form factors, the use of consistent vector spectral densities, the emission from a quark-gluon plasma, and primordial nucleon-nucleon collisions reproduce the photon spectra measured at the Super Proton Synchrotron (SPS). Some predictions for the Relativistic Heavy Ion Collider (RHIC) are made.

Physics at the AD/PS/SPS - PLEASE NOTE CHANGE OF ROOM!(2/4)

CERN Multimedia

CERN. Geneva

2012-01-01

Lecture 2: QCD and hadron physics: COMPASS, NA61, DIRAC The lecture will discuss the research done at the COMPASS, SHINE and DIRAC experiments at the SPS and PS. COMPASS studies nucleon structure and hadron spectroscopy, SHINE searches for the critical point and onset of deconfinement in heavy ion collisions while DIRAC studies the pi-pi scattering length in pionic atoms.

Coldbox installation for HL-LHC crab cavity test in the SPS tunnel (BA6)

CERN Document Server

Ordan, Julien Marius

2018-01-01

The Cold-box, produced by Linde Kryotechnik for the SPS crab-cavity test stand for HL-LHC, on its arrival at CERN. It wll be transported into the tunnel in horizontal position and then will have to be tilted in its operational position, on its vertical axis, before connecting it to cryogenics lines.

The CERN LEP-SPS Librarian system

International Nuclear Information System (INIS)

Corniaux, C.; Morpurgo, G.

1990-01-01

The complexity of a software working environment, such as the control system for the SPS and LEP accelerators, requires a considerable management effort. The software needed to run the machines is continuously evolving, as new releases of application and system programs are introduced rather frequency. Ideally the management effort must coordinate all the different software developers and their users (the machine operating team). A software tool, the Librarian, has been written to help them in performing this task. Its ultimate goal is to enable the accelerator operators to retain control of all the software running in the control system. All the source files needed to produce a piece of running software (a 'product') are saved together, and can be retrieved either individually or as a whole. Management of the different versions of a product is also implemented, as well as a scheme for protections and access rights depending on the type of user (Librarian manager, application manager or software developer). The data base ORACLE has been used to maintain logical links between files saved under the Librarian. (orig.)

Pb-ions in harmonic number 4653 at SPS flat bottom

CERN Document Server

Bartosik, H; Huschauer, A

2017-01-01

Pb-ion beams suer from strong beam degradation suchas transverse emittance growth and losses on the long flatbottom of the SPS cycles used for LHC filling. A possiblecontribution to the losses could come from RF noise, espe-cially due to the frequency and amplitude modulation duringeach revolution period of the fixed frequency accelerationmode required for the acceleration of these beams. A ma-chine development session in 2016 was devoted to a directcomparison of a cycle with fixed harmonic number at flatbottom and a cycle with the usually used fixed frequencymode. The main results are reported here.

A 40 MHz Bunch by Bunch Intensity Measurement for the CERN SPS and LHC

CERN Document Server

Jakob, H; Jones, R; Jensen, L

2003-01-01

A new acquisition system has been developed to allow the measurement of the individual intensity of each bunch in a 40MHz bunch train. Such a system will be used for the measurement of LHC type beams after extraction from the CERN-PS right through to the dump lines of the CERN-LHC. The method is based on integrating the analogue signal supplied by a Fast Beam Current Transformer at a frequency of 40MHz. This has been made possible with the use of a fast integration ASIC developed by the University of Clermont-Ferrand, France, for the LHC-b pre-shower detector. The output of the integrator is digitised using a 12-bit ADC and fed into a Digital Acquisition Board (DAB) that was originally developed by TRIUMF, Canada, for use in the LHC orbit system. A full system set-up was commissioned during 2002 in the CERN-SPS, and following its success will now be extended in 2003 to cover the PS to SPS transfer lines and the new TT40 LHC extraction channel.

Experimental results concerning global observables from the CERN SPS heavy ion program

International Nuclear Information System (INIS)

Young, G.R.

1990-06-01

A brief overview is given of experimental results obtained during the initial operation of the heavy-ion program at the CERN SPS during the period 1986--1988. This paper confines itself to a presentation of results on so-called global observables, such as energy flow and multiplicity distributions, and on information extracted from them. Of particular interest among the latter are an estimate of the magnitude and spatial distribution of the energy density attained. 3 refs., 27 figs

SPS Dipole Multipactor Test and TEWave Diagnostics

CERN Document Server

Caspers, F; Edwards, P; Federmann, S; Holz, M; Taborelli, M

2013-01-01

Electron cloud accumulation in particle accelerators can be mitigated by coating the vacuum beam pipe with thin films of low secondary electron yield (SEY) material. The SEY of small coated samples are usually measured in the laboratory. To further test the properties of different coating materials, RF-induced multipacting in a coaxial waveguide configuration can be performed. The technique is applied to two main bending dipoles of the SPS, where the RF power is fed through a tungsten wire stretched along the vacuum chamber (6.4 m). A dipole with a bare stainless steel chamber shows a clear power threshold initiating an abrupt rise in reflected power and pressure. The effect is enhanced at RF frequencies corresponding to electron cyclotron resonances for given magnetic fields. Preliminary results show that the dipole with a carbon coated vacuum chamber does not exhibit any pressure rise or reflected RF power up to the maximum available input power. In the case of a large scale coating production this techniqu...

Fragmentation of Pb-Projectiles at SPS Energies

CERN Multimedia

2002-01-01

% EMU17 \\\\ \\\\ We have exposed stacks consisting of solid state nuclear track detectors (CR-39 plastic and BP-1 glass) and different target materials at the SPS to beams of Pb projectiles. Our detectors record tracks of relativistic nuclei with charge numbers of Z~$\\geq$~6 for CR-39 and Z~$\\geq$75 for BP-1. After development of the tracks by etching they are detected and measured using completely automated microscope systems. Thus experiments with high statistics are possible. \\\\ \\\\BP-1 detectors were exposed to measure total charge changing cross sections and elemental production cross sections for heavy projectile fragments. These experiments were performed for different targets CH$ _{2} $, C, Al, Cu, Ag and Pb. Comparison of the results for different targets allows to investigate contributions to charge changing reactions by electromagnetic dissociation. Multifragmentation events in which several intermediate mass fragments are emitted from the heavy Pb projectile are studied using stacks containing CR-39 d...

The new generation of PowerPC VMEbus front end computers for the CERN SPS and LEP accelerators system

CERN Document Server

Charrue, P; Ghinet, F; Ribeiro, P

1995-01-01

The CERN SPS and LEP PowerPC project is aimed at introducing a new generation of PowerPC VMEbus processor modules running the LynxOS real-time operating system. This new generation of front end computers using the state-of-the-art microprocessor technology will first replace the obsolete XENIX PC based systems (about 140 installations) successfully used since 1988 to control the LEP accelerator. The major issues addressed in the scope of this large scale project are the technical specification for the new PowerPC technology, the re-engineering aspects, the interfaces with other CERN wide projects, and the set up of a development environment. This project offers also support for other major SPS and LEP projects interested in the PowerPC microprocessor technology.

High-Pressure Spark Plasma Sintering (HP SPS): A Promising and Reliable Method for Preparing Ti-Al-Si Alloys.

Science.gov (United States)

Knaislová, Anna; Novák, Pavel; Cygan, Sławomir; Jaworska, Lucyna; Cabibbo, Marcello

2017-04-27

Ti-Al-Si alloys are prospective material for high-temperature applications. Due to low density, good mechanical properties, and oxidation resistance, these intermetallic alloys can be used in the aerospace and automobile industries. Ti-Al-Si alloys were prepared by powder metallurgy using reactive sintering, milling, and spark plasma sintering. One of the novel SPS techniques is high-pressure spark plasma sintering (HP SPS), which was tested in this work and applied to a Ti-10Al-20Si intermetallic alloy using a pressure of 6 GPa and temperatures ranging from 1318 K (1045 °C) to 1597 K (1324 °C). The low-porosity consolidated samples consist of Ti₅Si₃ silicides in an aluminide (TiAl) matrix. The hardness varied between 720 and 892 HV 5.

Simulation of e-cloud driven instability and its attenuation using a simulated feedback system in the CERN SPS

International Nuclear Information System (INIS)

Vay, J.-L.; Furman, M.A.

2010-01-01

Electron clouds have been shown to trigger fast growing instabilities on proton beams circulating in the SPS, and a feedback system to control the single-bunch instabilities is under active development. We present the latest improvements to the WARP-POSINST simulation framework and feedback model, and its application to the self-consistent simulations of two consecutive bunches interacting with an electron cloud in the SPS. Simulations using an idealized feedback system exhibit adequate mitigation of the instability providing that the cutoff of the feedback bandwidth is at or above 450 MHz. Artifacts from numerical noise of the injected distribution of electrons in the modeling of portions of bunch trains are discussed, and benchmarking of WARP against POSINST and HEADTAIL are presented.

The inhibitive action of sodium castor sulphonate Towards the corrosion of aluminium in Hydrochloric acid

OpenAIRE

Soliman, S.A.; Mourad, M. Y.

1993-01-01

The dissolution of aluminium in 2M HC1 solution in presence of sodium castor sulphonate (SCS) has been studied using thermometric and hydrogen evolution methods. The results showed that the additive retards the dissolution due to its chemisorption on the metal surface via 71 the electrons of the double bond. The inhibition obyes the Frumkin's isotherm. تمت دراسة ذوبان فلز الألمنيوم في محلول 2 مولاري من حمض الهيدروكلوريك في وجود سلفونات الخروع الصوديومية باستخدام الطريقة الحرارية وطريقة تص...

Synthesis, characterization and applications of a new cation exchanger tamarind sulphonic acid (TSA) resin.

Science.gov (United States)

Singh, A V; Sharma, Naresh Kumar; Rathore, Abhay S

2012-01-01

A new composite cation exchanger, tamarind sulphonic acid (TSA) resin has been synthesized. The chemically modified TSA ion exchange resin has been used for the removal and preconcentration of Zn2+, Cd2+, Fe2+, Co2+ and Cu2+ ions in aqueous solution and effluent from the Laxmi steel plant in Jodhpur, India. This type of composite represents a new class of hybrid ion exchangers with good ion exchange capacity, stability, reproducibility and selectivity for toxic metal ions found in effluent from the steel industry. The characterization of the resin was carried out by determining the ion-exchange capacity, elemental analysis, pH titration, Fourier transform infrared spectra and thermal analysis. The distribution coefficients (K(d)) of toxic metal ions were determined in a reference aqueous solution and the steel plant effluent at different pH values; the absorbency of different metal ions on the TSA resin was studied for up to 10 cycles. The adsorption of different metal ions on TSA resin follows the order: Co2+ > Cu2+ > Zn2+ > Fe2+ > Cd2+. The ion exchange capacity of TSA resin is 2.87%.

Electron-cloud simulation results for the SPS and recent results for the LHC

International Nuclear Information System (INIS)

Furman, M.A.; Pivi, M.T.F.

2002-01-01

We present an update of computer simulation results for some features of the electron cloud at the Large Hadron Collider (LHC) and recent simulation results for the Super Proton Synchrotron (SPS). We focus on the sensitivity of the power deposition on the LHC beam screen to the emitted electron spectrum, which we study by means of a refined secondary electron (SE) emission model recently included in our simulation code

The effectiveness of CCDSR learning model to improve skills of creating lesson plan and worksheet science process skill (SPS) for pre-service physics teacher

Science.gov (United States)

Limatahu, I.; Suyatno; Wasis; Prahani, B. K.

2018-03-01

In the previous research, CCDSR (Condition, Construction, Development, Simulation, and Reflection) learning model has been developed to improve science process skills for pre-service physics teacher. This research is aimed to analyze the effectiveness of CCDSR learning model towards the improvement skills of creating lesson plan and worksheet of Science Process Skill (SPS) for pre-service physics teacher in academic year 2016/2017. This research used one group pre-test and post-test design on 12 pre-service physics teacher at Physics Education, University of Khairun. Data collection was conducted through test and observation. Creating lesson plan and worksheet SPS skills of pre-service physics teacher measurement were conducted through Science Process Skill Evaluation Sheet (SPSES). The data analysis technique was done by Wilcoxon t-test and n-gain. The CCDSR learning model consists of 5 phases, including (1) Condition, (2) Construction, (3) Development, (4) Simulation, and (5) Reflection. The results showed that there was a significant increase in creating lesson plan and worksheet SPS skills of pre-service physics teacher at α = 5% and n-gain average of moderate category. Thus, the CCDSR learning model is effective for improving skills of creating lesson plan and worksheet SPS for pre-service physics teacher.

New Working Conditions for the SPS from 2000

CERN Document Server

Nonis, M

2000-01-01

After the long shutdown (December 2000 to May 2001), the SPS complex will work with the main water-cooling loop in closed circuit. This will affect the working conditions because of the higher temperature of the supplied water (24 ° C, i.e. 15 K higher) and therefore of the air in the tunnel. The cooling installations will consequently be upgraded or replaced to meet the new needs, and several new chilled-water stations will be installed to supply the present users. The author will thoroughly explain the main aspects of all these modifications and report the results of the preliminary tests carried out in September 1996. Finally, an overview of the global costs (operational and linked to the project) will be given, taking into account the different consumption of water, electricity and the effects on the magnet components.

Enhancement of the photocatalytic activity of TiO2 nanoparticles by surface-capping DBS groups

International Nuclear Information System (INIS)

Wang Baiqi; Jing Liqiang; Qu Yichun; Li Shudan; Jiang Baojiang; Yang Libin; Xin Baifu; Fu Honggang

2006-01-01

TiO 2 nanoparticles capped with sodium dodecylbenzenesulfonate (DBS) are synthesized by a sol-hydrothermal process using tetrabutyl titanate and DBS as raw materials. The effects of surface-capping DBS on the surface photovoltage spectroscopy (SPS), photoluminescence (PL) and photocatalytic performance of TiO 2 nanoparticles are principally investigated together with their relationships. The results show that the surface of TiO 2 nanoparticles can be well capped by DBS groups while the pH value and added DBS amount are controlled at 5.0 and 2% of TiO 2 mass weight, respectively, and the linkage between DBS groups and TiO 2 surfaces is mainly by means of quasi-sulphonate bond. The intensities of SPS and PL spectra of TiO 2 obviously decrease after DBS-capping, while the activity can greatly increase during the photocatalytic degradation of Rhodamine B (RhB) solution, which are mainly attributed to the electron-withdrawing character of the DBS groups. Moreover, the enhancement of photocatalytic activity of DBS-capped TiO 2 is also related to the increase in the capability for adsorbing RhB

Validity of Scientific Based Chemistry Android Module to Empower Science Process Skills (SPS) in Solubility Equilibrium

Science.gov (United States)

Antrakusuma, B.; Masykuri, M.; Ulfa, M.

2018-04-01

Evolution of Android technology can be applied to chemistry learning, one of the complex chemistry concept was solubility equilibrium. this concept required the science process skills (SPS). This study aims to: 1) Characteristic scientific based chemistry Android module to empowering SPS, and 2) Validity of the module based on content validity and feasibility test. This research uses a Research and Development approach (RnD). Research subjects were 135 s1tudents and three teachers at three high schools in Boyolali, Central of Java. Content validity of the module was tested by seven experts using Aiken’s V technique, and the module feasibility was tested to students and teachers in each school. Characteristics of chemistry module can be accessed using the Android device. The result of validation of the module contents got V = 0.89 (Valid), and the results of the feasibility test Obtained 81.63% (by the student) and 73.98% (by the teacher) indicates this module got good criteria.

Indiana Wesleyan University SPS Physics Outreach to Rural Middle School and High School Students

Science.gov (United States)

Ostrander, Joshua; Rose, Heath; Burchell, Robert; Ramos, Roberto

2013-03-01

The Society of Physics Students chapter at Indiana Wesleyan University is unusual in that it has no physics major, only physics minors. Yet while just over a year old, IWU-SPS has been active in performing physics outreach to middle school and high school students, and the rural community of Grant County. Our year-old SPS chapter consists of majors from Chemistry, Nursing, Biology, Exercise Science, Computer Science, Psychology, Pastoral Studies, and Science Education, who share a common interest in physics and service to the community. IWU currently has a physics minor and is currently working to build a physics major program. Despite the intrinsic challenges, our multi-disciplinary group has been successful at using physics demonstration equipment and hands-on activities and their universal appeal to raise the interest in physics in Grant County. We report our experience, challenges, and successes with physics outreach. We describe in detail our two-pronged approach: raising the level of physics appreciation among the IWU student community and among pre-college students in a rural community of Indiana. Acknowledgements: We acknowledge the support of the Society of Physics Students through a Marsh White Outreach Award and a Blake Lilly Prize.

Nine years of carbon coating development for the SPS upgrade: achievements and heritage.

CERN Document Server

Taborelli, Mauro; Costa Pinto, Pedro; Cruikshank, Paul

2015-01-01

CERN has succeeded in producing carbon coatings that eradicate electron cloud in accelerators without any beam conditioning or in situ heating. Investing about 1 MCHF and dedicating 31 FTE (28 man-years, staff and associate members) in 9 years in the framework of LIU-SPS, CERN has increased: technological competences in thin-film coatings, worldwide visibility in surface characterisation, and capability in electron cloud measurement. Future projects are still benefiting from such an investment.

The new generation of PowerPC VMEbus front end computers for the CERN SPS and LEP accelerators control system

CERN Document Server

Van den Eynden, M

1995-01-01

The CERN SPS and LEP PowerPC project is aimed at introducing a new generation of PowerPC VMEbus processor modules running the LynxOS real-time operating system. This new generation of front end computers using the state-of-the-art microprocessor technology will first replace the obsolete Xenix PC based systems (about 140 installations) successfully used since 1988 to control the LEP accelerator. The major issues addressed in the scope of this large scale project are the technical specification for the new PowerPC technology, the re-engineering aspects, the interfaces with other CERN wide projects, and the set up of a development environment. This project offers also support for other major SPS and LEP projects interested in the PowerPC microprocessor technology.

Catalytic production of biodiesel

Energy Technology Data Exchange (ETDEWEB)

Theilgaard Madsen, A.

2011-07-01

The focus of this thesis is the catalytic production of diesel from biomass, especially emphasising catalytic conversion of waste vegetable oils and fats. In chapter 1 an introduction to biofuels and a review on different catalytic methods for diesel production from biomass is given. Two of these methods have been used industrially for a number of years already, namely the transesterification (and esterification) of oils and fats with methanol to form fatty acid methyl esters (FAME), and the hydrodeoxygenation (HDO) of fats and oils to form straight-chain alkanes. Other possible routes to diesel include upgrading and deoxygenation of pyrolysis oils or aqueous sludge wastes, condensations and reductions of sugars in aqueous phase (aqueous-phase reforming, APR) for monofunctional hydrocarbons, and gasification of any type of biomass followed by Fischer-Tropsch-synthesis for alkane biofuels. These methods have not yet been industrialised, but may be more promising due to the larger abundance of their potential feedstocks, especially waste feedstocks. Chapter 2 deals with formation of FAME from waste fats and oils. A range of acidic catalysts were tested in a model fat mixture of methanol, lauric acid and trioctanoin. Sulphonic acid-functionalised ionic liquids showed extremely fast convertion of lauric acid to methyl laurate, and trioctanoate was converted to methyl octanoate within 24 h. A catalyst based on a sulphonated carbon-matrix made by pyrolysing (or carbonising) carbohydrates, so-called sulphonated pyrolysed sucrose (SPS), was optimised further. No systematic dependency on pyrolysis and sulphonation conditions could be obtained, however, with respect to esterification activity, but high activity was obtained in the model fat mixture. SPS impregnated on opel-cell Al{sub 2}O{sub 3} and microporous SiO{sub 2} (ISPS) was much less active in the esterification than the original SPS powder due to low loading and thereby low number of strongly acidic sites on the

Measurement of Electron Cloud Effects in SPS

CERN Document Server

Jiménez, J M

2004-01-01

The electron cloud is not a new phenomenon, indeed, it was observed already in other machines like the proton storage rings in BINP Novosibirsk or in the Intersecting Storage Ring (ISR) at CERN. Inside an accelerator beam pipe, the electrons can collectively and coherently interact with the beam potential and degrade the performance of the accelerators operating with intense positively charged bunched beams. In the LHC, electron multipacting is expected to take place in the cold and warm beam pipe due to the presence of the high intensities bunched beams, creating an electron cloud. The additional heat load induced by the electron cloud onto the LHC beam screens of the cold magnets of the LHC bending sections (the arcs represent ~21 km in length) was, and is still, considered as one of the main possible limitation of LHC performances. Since 1997 and in parallel with the SPS studies with LHC-type beams, measurements in other machines or in the laboratory have been made to provide the input parameters required ...

Factor solutions of the Social Phobia Scale (SPS) and the Social Interaction Anxiety Scale (SIAS) in a Swedish population.

Science.gov (United States)

Mörtberg, Ewa; Reuterskiöld, Lena; Tillfors, Maria; Furmark, Tomas; Öst, Lars-Göran

2017-06-01

Culturally validated rating scales for social anxiety disorder (SAD) are of significant importance when screening for the disorder, as well as for evaluating treatment efficacy. This study examined construct validity and additional psychometric properties of two commonly used scales, the Social Phobia Scale and the Social Interaction Anxiety Scale, in a clinical SAD population (n = 180) and in a normal population (n = 614) in Sweden. Confirmatory factor analyses of previously reported factor solutions were tested but did not reveal acceptable fit. Exploratory factor analyses (EFA) of the joint structure of the scales in the total population yielded a two-factor model (performance anxiety and social interaction anxiety), whereas EFA in the clinical sample revealed a three-factor solution, a social interaction anxiety factor and two performance anxiety factors. The SPS and SIAS showed good to excellent internal consistency, and discriminated well between patients with SAD and a normal population sample. Both scales showed good convergent validity with an established measure of SAD, whereas the discriminant validity of symptoms of social anxiety and depression could not be confirmed. The optimal cut-off score for SPS and SIAS were 18 and 22 points, respectively. It is concluded that the factor structure and the additional psychometric properties of SPS and SIAS support the use of the scales for assessment in a Swedish population.

Thermal Studies on the SPS Wideband Transverse Feedback Kicker

CERN Document Server

Roggen, Toon; Hofle, Wolfgang; Montesinos, Eric; CERN. Geneva. ATS Department

2016-01-01

As part of the SPS wideband transverse feedback system in the framework of the LHC Injector Upgrade (LIU) project, a wideband kicker design is being proposed. Vertical beam instabilities due to intensity dependent effects (electron cloud instability (ECI) and transverse mode coupling instability (TMCI)) are potentially suppressed by using a feedback system driving such a kicker system. One of the options for a kicker is a one meter long slotted-coaxial kicker, providing a substantial vertical kick strength (10ˉ5 –10ˉ4 eV.s/m) over a bandwidth ranging from nearly DC to 1 GHz. The necessary kick strength requires a total power of 4 kW. This note describes thermal studies that assisted in the material choice of the feedthroughs of the slotted-coaxial kicker and guided the design choices.

Pengaruh Ethyl Methane Sulphonate (EMS Terhadap Pertumbuhan dan Variasi Tanaman Marigold (Tagetes sp.

Directory of Open Access Journals (Sweden)

NI MADE DIAN PRATIWI

2015-09-01

Full Text Available The Effect of Ethyl Methane Sulphonate (EMS on Growth and Variations of Marigold (Tagetes sp. The aims of this research are to determine the variation of marigold (Tagetes sp derived from seed treated with EMS and to recommend the EMS concentrations that are able to induce varietion. Seeds of marigold cv Narai Orange were soaked in water for 6 hours, followed by soaking in EMS at concentration of 0%, 0.3%, 0.6% and 0.9% for 4 hours. This study employed Randomized Complete Blok Design with 10 replicates and each replicate consisted of 10 plants. Six plants were randomly chosen for measurements. The total number of samples observed were 240 plants. Observations were made on the percentage of the growth, plant height, number of leaves, number of branches, diameter and weight of flowers. Data obtained from the observations were analyzed using Analysis of Variance (ANOVA, followed by DMRT (Duncan’s Multiple Range Test if there is a significant difference between treatments. The EMS treatment reduced all characters observed. The EMS concentration of 0.6% showed plant that had yellow flowers. The 0.9% EMS treatment resulted in one plant with chimera, 6 dwarf plants, 2 plants with thin stems, and 1 short plant with many branches. Untreated plants did not show any variation.

THE EFFECT OF PROBLEM SOLVING LEARNING MODEL BASED JUST IN TIME TEACHING (JiTT ON SCIENCE PROCESS SKILLS (SPS ON STRUCTURE AND FUNCTION OF PLANT TISSUE CONCEPT

Directory of Open Access Journals (Sweden)

Resha Maulida

2017-11-01

Full Text Available The purpose of this study was to determine the effect of Problem Solving learning model based Just in Time Teaching (JiTT on students' science process skills (SPS on structure and function of plant tissue concept. This research was conducted at State Senior High School in South Tangerang .The research conducted using the quasi-experimental with Nonequivalent pretest-Postest Control Group Design. The samples of this study were 34 students for experimental group and 34 students for the control group. Data was obtained using a process skill test instrument (essai type that has been tested for its validity and reliability. Result of data analysis by ANACOVA, show that there were significant difference of postest between experiment and control group, by controlling the pretest score (F = 4.958; p <0.05. Thus, the problem-solving learning based on JiTT proved to improve students’ SPS. The contribution of this treatment in improving the students’ SPS was 7.2%. This shows that there was effect of problem solving model based JiTT on students’ SPS on the Structure and function of plant tissue concept.

Workshop on Satellite Power Systems (SPS) effects on optical and radio astronomy

International Nuclear Information System (INIS)

Stokes, G.M.; Ekstrom, P.A.

1980-04-01

The impacts of the SPS on astronomy were concluded to be: increased sky brightness, reducing the effective aperture of terrestrial telescopes; microwave leakage radiation causing erroneous radioastronomical signals; direct overload of radioastronomical receivers at centimeter wavelengths; and unintentional radio emissions associated with massive amounts of microwave power or with the presence of large, warm structures in orbit causing the satellites to appear as individual stationary radio sources; finally, the fixed location of the geostationary satellite orbits would result in fixed regions of the sky being unusable for observations

The Lead Ion accelerating facility and the relative experimental program at CERN SPS fixed target

International Nuclear Information System (INIS)

Riccati, L.

1995-01-01

The status of the lead beam construction and commissioning is reviewed. A very wide experimental program with heavy nuclei was approved at the CERN SPS for a dedicated study of ultrarelativistic nucleus-nucleus collisions. An arbitrary and very short summary of the advantages and motivations for the use of heavier nuclei in the quark-gluon plasma search will be presented. ((orig.))

Reactions on catalytic probe surface during oxygen plasma treatment of polyether sulphone: Reakcije na površini katalitične sonde med plazemsko obdelavo polieter sulfona:

OpenAIRE

Mozetič, Miran

1998-01-01

Experiments on the behavior of a nickel catalytic probe during activation of the surface of polyether sulphone in oxygen plasma are described. The temperature of the probe mounted 30 cm apart from inductively coupled RF oxygen plasma was measured for the case of empty dischaarge vessel and the case a sample with the dimensions of 8 cm x 1.2 cm x 0.4 cm was mounted in the middle of the discharge coil. It was found that both the maximum temperature and the first time derivative of the probe was...

Prospects for the study of the {tau}-System in SPS1a' at the ILC

Energy Technology Data Exchange (ETDEWEB)

Bechtle, P.; Berggren, M.; List, J. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Stempel, O. [Univ. Hamburg, Inst. fuer Experimentalphysik (Germany); Schade, P. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Univ. Hamburg, Inst. fuer Experimentalphysik (Germany)

2009-08-15

The prospects for the analysis of {tau} channels at the SUSY benchmark point SPS1a', especially from e{sup +}e{sup -} {yields} {tau}{sub 1}{sup +}{tau}{sub 1}{sup -} and e{sup +}e{sup -} {yields} {tau}{sub 2}{sup +}{tau}{sub 2}{sup -}, have been studied in full simulation of the ILD detector concept forseen for the International Linear Collider. All accessible SUSY channels as well as all Standard Model backgrounds were generated at a centre-of-mass energy E{sub CMS}=500 GeV, including the beam energy spectrum and beam backgrounds expected for nominal ILC beam parameters. With an integrated luminosity of 500 fb{sup -1} delivered to the experiment, the masses of the {tau}{sub 1} and {tau}{sub 2} can be measured to 107.69{sub -0.06}{sup +0.03} GeV{+-}1.1 . {delta}M{sub {chi}{sub 1}{sup 0}} and 183{sub -5}{sup +11} GeV{+-}18 . {delta}M{sub {chi}{sub 1}{sup 0}}, respectively, while the true values in SPS1a' are 107.9 GeV and 194.9 GeV, respectively. The cross sections for {tau}{sub 1} and {tau}{sub 2} pair production could be obtained with a precision of 3.1 % and 4.2 %, respectively. Combining the mass and cross section measurement in the {tau}{sub 2} channel allows to determine the LSP mass with a relative error of 1.7 %, assuming a known mixing angle. In {tau}{sub 1} {yields} {tau}{chi}{sub 1}{sup 0} decays, the {tau} polarisation is measured to be 91{+-}9 % and 87.0{+-}3.4 % in the {pi} and {rho} decay channels of the {tau}, respectively. The true value in the simulated SPS1a' sample is 89.6 %. (orig.)

Search for Heavy Neutral Leptons at the SPS

CERN Document Server

Jacobsson, R

2013-01-01

A minimal extension of the Standard Model with three right-handed singlet Majorana leptons with masses below the Fermi scale (vMSM) allows incorporating a mechanism to generate the baryon asymmetry of the Universe, account for the pattern of small neutrino masses and oscillations, and potentially provide a Dark Matter candidate. This avoids introducing new energy scales between the Fermi scale and the Planck scale, the lack of which has also been shown to be compatible with the mass of the recently discovered Higgs boson. Considerations based on cosmological constraints and based on the data on neutrino oscillations favour a range of masses and couplings for these new heavy neutral leptons (HNL) which is largely accessible to experimental verification or falsification. This paper outlines a proposal for a new fixed-target experiment at the CERN SPS to search for the HNLs, together with an introduction to the theoretical motivation, a description of the experimental setup with the associated beam line and det...

Most critical collimator-mask-magnet sequence in the SPS-to-LHC transfer lines: energy deposition study.

CERN Document Server

Marzo, Matteo; Lechner, Anton; Vlachoudis, Vasilis

2017-01-01

This technical note refers to a study on the relation between the impact conditions of the SPS 450GeV proton beam and the energy deposited downstream the Target Collimator Dump In- jection Long (TCDIL) collimators [1], in the SPS-to-LHC transfer lines TI2 and TI8. Such an analysis is relevant in order to simulate the worst scenario of failure, in case the beam impacts on the TCDIL collimator’s jaw, in the frame of the LHC Injectors Upgrade (LIU), in view of the High Luminosity LHC (HL-LHC) phase. Previous studies already showed the dependency of the energy deposited in the downstream masks on the collimators-masks distance [2]. In absence of a (realistic) impact parameter, we perform now a study to select the most pessimistic one, trying to understand the origin of the various components responsible for the energy deposition on the downstream mask and magnet. The set up of the Monte Carlo FLUKA [3] [4] simulations and the most relevant results will be presented in this document. A sensitivity analysis was a...

Modification of jet-like correlations in Pb-Au at the SPS

International Nuclear Information System (INIS)

Appelshaeuser, Harald; Kniege, Stefan

2009-01-01

A study of high-p t two-particle azimuthal correlations in Pb-Au at √(S NN )=17,2GeV by the CERES experiment at the CERN-SPS, is presented. A broad away-side correlation with significant dip at Δφ∼π is observed. The shape and magnitude of the correlation is similar to measurements at RHIC. In comparison to PYTHIA calculations, we observe a significant excess of soft particles at the away-side. A study of charge correlations between trigger and associated particles disfavors vacuum fragmentation of the away-side jet and suggests significant energy transfer of the hard-scattered parton to the medium.

High statistics inclusive phi-meson production at SPS energies

International Nuclear Information System (INIS)

Dijkstra, H.B.

1985-01-01

This thesis describes an experiment studying the inclusive reaction hadron + Be → phi + anything → K + + K - + anything in 100 GeV/c, 120 GeV/c and 200 GeV/c hadron interactions. A total of 8x10 6 events were recorded using both positively and negatively charged unseparated hadron beams supplied by the CERN SPS. The experiment made use of an intelligent on-line event selection system based on micro-processors (FAMPs) in conjunction with a system of large MWPCs to increase the number of phi-events recorded per unit time. In 32 days of data taking over 600,000 phi-mesons were recorded onto magnetic tape. The physics motivation for collecting a large statistics sample of inclusive phi-mesons was the investigation of the inclusive phi-meson production mechanism and phi-spectroscopy. (Auth.)

The New SPS Extraction Channel for LHC and CNGS

CERN Document Server

Goddard, B; Schröder, G; Weterings, W; Uythoven, J

2000-01-01

The Large Hadron Collider (LHC) and CERN Neutrino to Gran Sasso (CNGS) projects require the construction of a new fast-extraction system in the long straight section LSS4 of the Super Proton Synchrotron (SPS) at CERN. A conventional DC septum magnet will be used, in conjunction with the installation of horizontal and vertical extraction bumpers, main quadrupoles with enlarged apertures, extraction kicker magnets and additional hardware protection, instrumentation, controls and electronics. The extraction channel must be able to accept the bright LHC proton beam at 450 GeV/c, and also the high intensity, large emittance fixed target CNGS proton beam at the nominal 400 GeV/c extraction momentum. This paper describes the extraction channel to be installed in 2003, and shows how the requirements for both the LHC and CNGS project can be met.

Spark Plasma Sintering (SPS)-Assisted Synthesis and Thermoelectric Characterization of Magnéli Phase V6O11

KAUST Repository

Joos, Markus

2018-01-11

The Magnéli phase V6O11 was synthesized in gram amounts from a powder mixture of V6O11/V7O13 and vanadium metal, using the spark plasma sintering (SPS) technique. Its structure was determined with synchrotron X-ray powder diffraction data from a phase-pure sample synthesized by conventional solid-state synthesis. A special feature of Magnéli-type oxides is a combination of crystallographic shear and intrinsic disorder that leads to relatively low lattice thermal conductivities. SPS prepared V6O11 has a relatively low thermal conductivity of κ = 2.72 ± 0.06 W (m K)-1 while being a n-type conductor with an electrical conductivity of σ = 0.039 ± 0.005 (μΩ m)-1, a Seebeck coefficient of α = -(35 ± 2) μV K-1, which leads to a power factor of PF = 4.9 ± 0.8 × 10-5W (m K2)-1 at ∼600 K. Advances in the application of Magnéli phases are mostly hindered by synthetic and processing challenges, especially when metastable and nanostructured materials such as V6O11 are involved. This study gives insight into the complications of SPS-assisted synthesis of complex oxide materials, provides new information about the thermal and electrical properties of vanadium oxides at high temperatures, and supports the concept of reducing the thermal conductivity of materials with structural building blocks such as crystallographic shear (CS) planes.

Spark Plasma Sintering (SPS)-Assisted Synthesis and Thermoelectric Characterization of Magnéli Phase V6O11

KAUST Repository

Joos, Markus; Cerretti, Giacomo; Veremchuk, Igor; Hofmann, Patrick; Frerichs, Hajo; Anjum, Dalaver H.; Reich, Tobias; Lieberwirth, Ingo; Panthö fer, Martin; Zeier, Wolfgang G.; Tremel, Wolfgang

2018-01-01

The Magnéli phase V6O11 was synthesized in gram amounts from a powder mixture of V6O11/V7O13 and vanadium metal, using the spark plasma sintering (SPS) technique. Its structure was determined with synchrotron X-ray powder diffraction data from a phase-pure sample synthesized by conventional solid-state synthesis. A special feature of Magnéli-type oxides is a combination of crystallographic shear and intrinsic disorder that leads to relatively low lattice thermal conductivities. SPS prepared V6O11 has a relatively low thermal conductivity of κ = 2.72 ± 0.06 W (m K)-1 while being a n-type conductor with an electrical conductivity of σ = 0.039 ± 0.005 (μΩ m)-1, a Seebeck coefficient of α = -(35 ± 2) μV K-1, which leads to a power factor of PF = 4.9 ± 0.8 × 10-5W (m K2)-1 at ∼600 K. Advances in the application of Magnéli phases are mostly hindered by synthetic and processing challenges, especially when metastable and nanostructured materials such as V6O11 are involved. This study gives insight into the complications of SPS-assisted synthesis of complex oxide materials, provides new information about the thermal and electrical properties of vanadium oxides at high temperatures, and supports the concept of reducing the thermal conductivity of materials with structural building blocks such as crystallographic shear (CS) planes.

Novel 2-phenyl-3-{4’-[N-(4”-aminophenylcarbamoyl]-phenyl}-quinazoline-4(3Hone-6-sulphonic acidbased mono azo reactive dyes

Directory of Open Access Journals (Sweden)

DIVYESH R. PATEL

2011-02-01

Full Text Available A series of new heterocyclic mono azo reactive dyes 7a–m were prepared by diazotization of 2-phenyl-3-{4’-[N-(4”-aminophenylcarbamoyl]-phenyl}-quinazoline-4(3H-one-6-sulphonic acid (3 and coupling with various cyanurated coupling components 6a–m and their dyeing performance on silk, wool and cotton fibres was assessed. These dyes were found to give a variety of colour shades with very good depth and levelness on the fibres. All the compounds were identified by conventional method (IR and 1H-NMR and elemental analyses. The percentage dye bath exhaustion on different fibres was reasonably good and acceptable. The dyed fibre showed moderate to very good fastness to light, washing and rubbing.

Test~of~Beam~Extraction~by~Crystal~Channeling~at~the~SPS: A First Step towards a LHC Extracted Beam

CERN Multimedia

2002-01-01

% RD22 \\\\ \\\\ The availability of a beam extracted out of the LHC accelerator would open up very interesting possibilities for B-physics, in particular for the study of CP-violation. Channeling in bent crystals appears to be the most promising method to produce an extracted beam of intensity $\\sim$~10$^{8}$ p/sec. This would provide as many as 10$^{10}$ $ B \\bar{B} $ pairs per year of run, two orders of magnitude more than could be produced by an e$^+$e$^-$ B-factory with L~=~10$^{34}$ cm$^{-2}$s$^{-1}$ We propose a R\\&D program to study beam extraction at the CERN SPS, using a silicon bent crystal to be installed in the SPS beam pipe and placed next to the beam in such a way as to intercept the beam halo. Transverse excitation of the beam in presence of non-linearities will be used to create halo conditions similar to what are expected for LHC.

Revealing Partons in Hadrons: From the ISR to the SPS Collider

CERN Document Server

Darriulat, Pierre

2015-01-01

Our understanding of the structure of hadrons has developed during the seventies and early eighties from a few vague ideas to a precise theory, Quantum Chromodynamics, that describes hadrons as made of elementary partons (quarks and gluons). Deep inelastic scattering of electrons and neutrinos on nucleons and electron–positron collisions have played a major role in this development. Less well known is the role played by hadron collisions in revealing the parton structure, studying the dynamic of interactions between partons and offering an exclusive laboratory for the direct study of gluon interactions. The present article recalls the decisive contributions made by the CERN Intersecting Storage Rings and, later, the proton–antiproton SPS Collider to this chapter of physics.

Recent results on (anti)nucleus and (anti)hyperon production in nucleus-nucleus collisions at CERN SPS energies

CERN Document Server

Melkumov, G L; Anticic, T; Baatar, B; Barna, D; Bartke, J; Betev, L; Bialkowska, H; Blume, C; Boimska, B; Botje, M; Bracinik, J; Bramm, R; Buncic, P; Cerny, V; Christakoglou, P; Chung, P; Chvala, O; Cramer, J G; Csató, P; Dinkelaker, P; Eckardt, V; Flierl, D; Fodor, Z; Foka, P; Friese, V; Gál, J; Gazdzicki, M; Genchev, V; Georgopoulos, G; Grebieszkow, K; Hegyi, S; Höhne, C; Kadija, K; Karev, A; Kikola, D; Gladysz-Dziadus, E; Kliemant, M; Kniege, S; Kolesnikov, V I; Kornas, E; Korus, R; Kowalski, M; Kraus, I; Kreps, M; Laszlo, A; Lacey, R; Van Leeuwen, M; Lvai, P; Litov, L; Lungwitz, B; Makariev, M; Malakhov, A I; Mateev, M; Melkumov, G L; Mischke, A; Mitrovski, M; Molnár, J; Mrówczynski, S; Nicolic, V; Pálla, G; Panagiotou, A D; Panayotov, D; Petridis, A; Peryt, W; Pikna, M; Pluta, J; Prindle, D; Pühlhofer, F; Renfordt, R; Roland, C; Roland5, G; Rybczynski, M; Rybicki, A; Sandoval, A; Schmitz, N; Schuster, T; Siklér, F; Sitár, B; Skrzypczak, E; Slodkowski, M; Stefanek, G; Stock, R; Seyboth, P; Strabel, C; Ströbele, H; Susa, T; Szentpetery, I; Sziklai, J; Szuba, M; Szymanski, P; Trubnikov, V; Varga, D; Vassiliou, M; Veres, G I; Vesztergombi, G; Vranic, D; Wlodarczyk, Z; Wojtaszek11, A; Yoo, I K; Zimnyi, J; Wetzler, A

2007-01-01

The NA49 experiment has collected comprehensive data on particle production in nucleus-nucleus collisions over the whole SPS beam energies range, the critical energy domain where the expected phase transition to a deconfined phase is expected to occur. The latest results from Pb+Pb collisions between 20$A$ GeV and 158$A$ GeV on baryon stopping and light nuclei production as well as those for strange hyperons are presented. The measured data on $p$, $\\bar{p}$, $\\Lambda$, $\\bar{\\Lambda}$, $\\Xi^-$ and $\\bar{\\Xi}^+$ production were used to evaluate the rapidity distributions of net-baryons at SPS energies and to compare with the results from the AGS and the RHIC for central Pb+Pb (Au+Au) collisions. The dependence of the yield ratios and the inverse slope parameter of the $m_t$ spectra on the collision energy and centrality, and the mass number of the produced nuclei $^3He$, $t$, $d$ and $\\bar{d}$ are discussed within coalescence and statistical approaches. Analysis of the total multiplicity exhibits remarkable a...

Application of Sodium Ligno Sulphonate as Surfactant in Enhanced Oil Recovery and Its Feasibility Test for TPN 008 Oil

Science.gov (United States)

Prakoso, N. I.; Rochmadi; Purwono, S.

2018-04-01

One of enhanced oil recovery (EOR) methods is using surfactants to reduce the interfacial tension between the injected fluid and the oil in old reservoir. The most important principle in enhanced oil recovery process is the dynamic interaction of surfactants with crude oil. Sodium ligno sulphonate (SLS) is a commercial surfactant and already synthesized from palm solid waste by another researcher. This work aimed to apply SLS as a surfactant for EOR especially in TPN 008 oil from Pertamina Indonesia. In its application as an EOR’s surfactant, SLS shall be passed feasibility test like IFT, thermal stability, compatibility, filtration, molecular weight, density, viscosity and pH tests. The feasibility test is very important for a preliminary test prior to another advanced test. The results demonstrated that 1% SLS solution in formation water (TPN 008) had 0.254 mN/M IFT value and was also great in thermal stability, compatibility, filtration, molecular weight, viscosity and pH test.

Comparative crossover controlled study using poly sulphone and Vitamin E coated dialyzers

International Nuclear Information System (INIS)

Al-Jonderby, Mohammad S.; Cabaguing, IoIani; Pajarillo, Amillata A.

2003-01-01

There is relatively little clinical experience reported on the use of vitamin E coated dialyzer (CL-EE 12, Terumo). This study compares its efficacy and intradialytic symptoms with a poly sulphone dialyzer in 2 group of patients in a controlled crossover trial design. This study was carried out at at Armed Forces Hospital, Riyadh, Kingdom of Saudi Arabia, during time period from January to March 2002. In group A, 34 patients were dialyzed for 4 weeks with vitamin E dialyzer and then switched over to Fresenius 60 ( F60)for 4 weeks .In group B, 41 patients were dialyzed with F60 for 4 weeks then switched over to vitamin E coated dialyzers for 4 weeks .The following parameters were measured weekly ,hemoglobin level ,urea reduction ratio (URR), urea clarence ratio (Kt/V), pre and post dialysis diastolic blood pressure (DBP)and diastolic blood pressure (DBP), interdialytic weight gain. The patients were observed for interdialytic hypertension or symptoms.No significant findings were found in any of the parameters except more dialyzer clotting was observed with vitamin E dialyzer than in F60 dialyzers(1.6%of dialysis sessions versus 0.1% P<0.03).The interdialytic weight gain tended to be less in vitamin E group but did not reach statistically significant difference.The Kt / V and URR were slightly higher when using vitamin E dialyzer only in the second and third weeks hypotensive episodes( P<,007)less leg cramp (P<.31) and less itching (P<,0.2) in the vitamin E coated treated group within group. There were only minor differences noted between between the 2 dialyzers in the parameters measured. (author)

Measurement of meson resonance production in π"- + C interactions at SPS energies

International Nuclear Information System (INIS)

Aduszkiewicz, A.; Dominik, W.; Kuich, M.; Matulewicz, T.; Podlaski, P.; Posiadala, M.; Walewski, M.; Ali, Y.; Brzychczyk, J.; Larsen, D.; Planeta, R.; Richter-Was, E.; Staszel, P.; Wyszynski, O.; Andronov, E.V.; Feofilov, G.A.; Igolkin, S.N.; Kovalenko, V.N.; Lazareva, T.V.; Merzlaya, A.O.; Seryakov, A.Yu.; Valiev, F.F.; Vechernin, V.V.; Anticic, T.; Kadija, K.; Susa, T.; Baatar, B.; Bunyatov, S.A.; Kireyeu, V.A.; Kolesnikov, V.I.; Krasnoperov, A.; Lyubushkin, V.V.; Malakhov, A.I.; Matveev, V.; Melkumov, G.L.; Tereshchenko, V.; Baszczyk, M.; Dorosz, P.; Kucewicz, W.; Mik, L.; Bhosale, S.; Davis, N.; Kielbowicz, M.; Marcinek, A.; Ozvenchuk, V.; Rybicki, A.; Blondel, A.; Bravar, A.; Damyanova, A.; Haesler, A.; Korzenev, A.; Ravonel, M.; Bogomilov, M.; Kolev, D.; Tsenov, R.; Brandin, A.; Selyuzhenkov, I.; Strikhanov, M.; Taranenko, A.; Busygina, O.; Golubeva, M.; Guber, F.; Ivashkin, A.; Kurepin, A.; Sadovsky, A.; Cherif, H.; Deveaux, M.; Klochkov, V.; Koziel, M.; Renfordt, R.; Snoch, A.; Stroebele, H.; Toia, A.; Cirkovic, M.; Manic, D.; Puzovic, J.; Czopowicz, T.; Grebieszkow, K.; Mackowiak-Pawlowska, M.; Maksiak, B.; Slodkowski, M.; Tefelska, A.; Tefelski, D.; Dembinski, H.; Engel, R.; Faas, S.; Garrido, X.; Herve, A.E.; Maris, I.C.; Mathes, H.J.; Roth, M.; Ruprecht, M.; Szuba, M.; Ulrich, R.; Unger, M.; Veberic, D.; Dumarchez, J.; Zambelli, L.; Ereditato, A.; Francois, C.; Pistillo, C.; Wilkinson, C.; Fodor, Z.; Garibov, A.; Gazdzicki, M.; Hylen, J.; Lundberg, B.; Marchionni, A.; Rameika, R.; Zwaska, R.; Johnson, S.R.; Marino, A.D.; Nagai, Y.; Rumberger, B.T.; Zimmerman, E.D.; Kaptur, E.; Kowalski, S.; Lysakowski, B.; Pulawski, S.; Schmidt, K.; Kowalik, K.; Rondio, E.; Stepaniak, J.; Laszlo, A.; Marton, K.; Lewicki, M.; Naskret, M.; Turko, L.; Messerly, B.; Paolone, V.; Wickremasinghe, A.; Mills, G.B.; Morozov, S.; Petukhov, O.; Mrowczynski, S.; Rybczynski, M.; Seyboth, P.; Stefanek, G.; Wlodarczyk, Z.; Wojtaszek-Szwarc, A.; Pavin, M.; Popov, B.A.; Rauch, W.; Roehrich, D.; Rustamov, A.

2017-01-01

We present measurements of ρ"0, ω and K"*"0 spectra in π"- + C production interactions at 158 GeV/c and ρ"0 spectra at 350 GeV/c using the NA61/SHINE spectrometer at the CERN SPS. Spectra are presented as a function of the Feynman's variable x F in the range 0 < x_F < 1 and 0 < x_F < 0.5 for 158 and 350 GeV/c respectively. Furthermore, we show comparisons with previous measurements and predictions of several hadronic interaction models. These measurements are essential for a better understanding of hadronic shower development and for improving the modeling of cosmic ray air showers. (orig.) 5

A study on friction welding of localized SPS5 spring steel

Energy Technology Data Exchange (ETDEWEB)

Jeong, S. U. [Gyeongsang National Univ., Jinju (Korea, Republic of)

2000-07-01

This thesis studied whether friction welding of SPS5, localized torsion bar material could be accomplished or not. And then optimum welding conditions were examined and leaded through tensile, impact, torsion and hardness test after postweld heat treatment of the actual field condition. Obtained results were as follows; linear relationship was existed between heating time and total upset, and a quadratic equation model could be made between tensile strength and heating time. Optimum welding conditions with fine structure were as follows in case total upset(U)= 8.5mm; the number of rotations(n)= 2,000 rpm, heating pressure(p{sub 1})= 80 MPa, upset pressure(P{sub 2})200 MPa, heating time(t{sub 1})= 4 sec, upset time(t{sub 2})= 3 sec.

CrossRef Experimental verification of the HERD prototype at CERN SPS

CERN Document Server

Dong, Yongwei; Wang, Junjing; Xu, Ming; Albergo, Sebastiano; Ambroglini, Filippo; Ambrosi, Giovanni; Azzarello, Philipp; Bai, Yonglin; Bao, Tianwei; Baldini, Luca; Battiston, Roberto; Bernardini, Paolo; Chen, Zhen; D'Alessandro, Raffaello; Duranti, Matteo; D'Urso, Domenico; Fusco, Piergiorgio; Gao, Jiarui; Gao, Xiaohui; Gargano, Fabio; Giglietto, Nicola; Hu, Bingliang; Li, Ran; Li, Yong; Liu, Xin; Loparco, Francesco; Lu, Junguang; Marsella, Giovanni; Mazziotta, Mario N; De Mitri, Ivan; Mori, Nicola; Orsi, Silvio; Oscar, Adriani; Pearce, Mark; Pohl, Martin; Ryde, Felix; Shi, Dalian; Spillantini, Piero; Su, Meng; Sun, Xin; Surdo, Antonio; Walter, Roland; Wang, Bo; Wang, Le; Wang, Ruijie; Wang, Zhigang; Wu, Bobing; Wu, Xin; Yan, Peng; Zhang, Li; Zhang, Shuangnan

2016-01-01

The High Energy cosmic-Radiation Detection (HERD) facility is one of several space astronomy payloads of the cosmic light house program onboard China's Space Station, which is planned for operation starting around 2020 for about 10 years. Beam test with a HERD prototype, to verify the HERD specifications and the reading out method of wavelength shifting fiber and image intensified CCD, was taken at CERN SPS in November, 2015. The prototype is composed of an array of 5*5*10 LYSO crystals, which is 1/40th of the scale of HERD calorimeter. Experimental results on the performances of the calorimeter are discussed. © (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.

Renal toxicological evaluations of sulphonated nanocellulose from Khaya sengalensis seed in Wistar rats.

Science.gov (United States)

Adewuyi, Adewale; Otuechere, Chiagoziem A; Adebayo, Olusegun L; Anazodo, Chibuzo; Pereira, Fabiano V

2018-03-25

Nanocellulose is currently gaining attention due to its unique properties. This attention includes its application as building blocks for developing novel functional materials, plant drug and also in drug delivery systems. However, its safety remains largely untested or less understood. Thus, sulphonated nanocellulose (KSS) was prepared from cellulose (KSC) isolated from Khaya senegalensis seed (KS). KS, KSC and KSS were characterized using Fourier transformed infrared (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TG), particle size distribution (PSD), zeta potential and scanning electron microscopy (SEM). The impact of KSS on selected renal markers of oxidative stress, inflammation and apoptosis in Wistar rats was also investigated. Thus, male rats were randomly assigned to four groups of five animals each and were treated with KSS (0, 50, 75 and 100 mg/kg BW) for 14 days. Thereafter, biomarkers of renal oxidative damage, inflammation and immunohistochemical expressions of iNOS, COX-2, Bcl-2 and p53 were evaluated. The results revealed KSS to have crystallinity of 70.40%, it was monomodal and has a flaky surface with agglomerations. KSS had no effect on markers of kidney function and oxidative damage, although there was a generalized hypernatremia after 14 days of exposure. Lastly, KSS enhanced the antioxidant status and immunohistochemical expressions of iNOS and COX-2 in the kidney of the rats. While the biomedical applications of KSS may appear plausible, our data suggests that it could induce renal toxicity via the combined impacts of electrolyte imbalance and inflammation. Copyright © 2018 Elsevier B.V. All rights reserved.

Study of high energy densities over extended nuclear volumes via nucleus-nucleus collisions at the SPS

CERN Multimedia

2002-01-01

This experiment examines in detail the characteristics of ultra-relativistic nucleus-nucleus interactions using $^{16}$O beams of 200 GeV/A from the SPS. The experiment combines 4$\\pi$ calorimeter coverage with measurements of inclusive particle spectra, two-particle correlations, low and high-mass lepton pairs and photons. A multiwire active target allows maximum interaction rates with a minimum of secondary interactions. Additional data are taken with an emulsion target.

Blast-wave analysis of strange particle $m_{T}$ spectra in Pb-Pb collisions at the SPS

CERN Document Server

Bruno, Giuseppe E

2005-01-01

The transverse mass spectra of high statistics, high purity samples of K/sup 0//sub S/, Lambda , Xi and Omega particles produced in Pb-Pb collisions at SPS energy have been studied in the framework of the blast-wave model. The dependence of the freezeout parameters on particle species and event centrality is discussed. Results at 40 A GeV/c are presented here for the first time.

Performance of Surfactant Methyl Ester Sulphonate solution for Oil Well Stimulation in reservoir sandstone TJ Field

Science.gov (United States)

Eris, F. R.; Hambali, E.; Suryani, A.; Permadi, P.

2017-05-01

Asphaltene, paraffin, wax and sludge deposition, emulsion and water blocking are kinds ofprocess that results in a reduction of the fluid flow from the reservoir into formation which causes a decrease of oil wells productivity. Oil well Stimulation can be used as an alternative to solve oil well problems. Oil well stimulation technique requires applying of surfactant. Sodium Methyl Ester Sulphonate (SMES) of palm oil is an anionic surfactant derived from renewable natural resource that environmental friendly is one of potential surfactant types that can be used in oil well stimulation. This study was aimed at formulation SMES as well stimulation agent that can identify phase transitions to phase behavior in a brine-surfactant-oil system and altered the wettability of rock sandstone and limestone. Performance of SMES solution tested by thermal stability test, phase behavioral examination and rocks wettability test. The results showed that SMES solution (SMES 5% + xylene 5% in the diesel with addition of 1% NaCl at TJformation water and SMES 5% + xylene 5% in methyl ester with the addition of NaCl 1% in the TJ formation water) are surfactant that can maintain thermal stability, can mostly altered the wettability toward water-wet in sandstone reservoir, TJ Field.

Thermoanalytical Study and Kinetics of New 8-Hydroxyquinoline 5-sulphonic Acid-Oxamide-Formaldehyde Terpolymer Resins

Directory of Open Access Journals (Sweden)

Rajesh N. Singru

2009-01-01

Full Text Available The terpolymer resins (8-HQ5-SAOF have been synthesized by the condensation of 8-hydroxyquinoline 5-sulphonic acid (8-HQ5-SA and oxamide (O with formaldehyde (F in the presence of acid catalyst and using varied molar proportion of the reacting monomers. The synthesized terpolymer resins have been characterized by different physico-chemical techniques. Thermogravimetric analysis of all terpolymer resins in present study have been carried out by non-isothermal thermogravimetric analysis technique in which sample is subjected to condition of continuous increase in temperature at linear rate. Thermal study of the resins was carried out to determine their mode of decomposition and relative thermal stabilities. Thermal decomposition curves were studied carefully with minute details. The Freeman-Carroll and Sharp-Wentworth methods have been used in the present investigation to calculate thermal activation energy and different kinetic parameter of the terpolymer resins. Thermal activation energy (Ea calculated with above two mentioned methods are in close agreement. The advantage of Freeman-Carroll method is to calculate both the order of reaction (n and energy of activation in one single stage by keeping heating rate constant. By using data of thermogravimetric analysis, various thermodynamic parameters like frequency factor (Z, entropy change (Δ S, free energy change (Δ F and apparent entropy (S* have been determined using Freeman-Carroll method.

The Run Control system of the NA62 experiment at CERN SPS

CERN Document Server

Lazzeroni, Cristina

2016-01-01

The NA62 experiment at CERN SPS started physics data taking this year with the aim to measure the ultra-rare decay K + → π +νν¯. The experiment consists of a large number of subsystems to reach the goal of 10 % accuracy and less than 10 % background. The Run Control has been designed to link their trigger and data acquisition system in a single central application easily controllable by non-expert shifters. It has been continuously evolving over time, integrating new equipments, following new requirements and feedback from shifters. The next steps of development is a more automatized system that integrates the knowledge acquired during the operation of the experiment.

Excavation of the SPS tunnel (view of a section prior to lining by a concrete shell)

CERN Multimedia

1974-01-01

The SPS ring (6911 m in circumference) is housed at a depth of 40 m (average) under the surface. The tunnel with an overall cross-sectional diameter of 4.8 m was drilled by big tunnelling machines (see 7406022X, 7406027X) into the molasse rock present in the Geneva basin. After the passage of the tunnelling machine the tunnel walls were lined with a concrete layer of about 30cm thickness.

Experience with workstations for accelerator control at the CERN SPS

International Nuclear Information System (INIS)

Ogle, A.; Ulander, J.; Wilkie, I.

1990-01-01

The CERN super proton synchrotron (SPS) control system is currently undergoing a major long-term upgrade. This paper reviews progress on the high-level application software with particular reference to the operator interface. An important feature of the control-system upgrade is the move from consoles with a number of fixed screens and limited multitasking ability to workstations with the potential to display a large number of windows and perform a number of independent tasks simultaneously. This workstation environment thus permits the operator to run tasks in one machine for which he previously had to monopolize two or even three old consoles. However, the environment also allows the operator to cover the screen with a multitude of windows, leading to complete confusion. Initial requests to present some form of 'global status' of the console proved to be naive, and several iterations were necessary before the operators were satisfied. (orig.)

Creep of Polycrystalline Magnesium Aluminate Spinel Studied by an SPS Apparatus.

Science.gov (United States)

Ratzker, Barak; Sokol, Maxim; Kalabukhov, Sergey; Frage, Nachum

2016-06-20

A spark plasma sintering (SPS) apparatus was used for the first time as an analytical testing tool for studying creep in ceramics at elevated temperatures. Compression creep experiments on a fine-grained (250 nm) polycrystalline magnesium aluminate spinel were successfully performed in the 1100-1200 °C temperature range, under an applied stress of 120-200 MPa. It was found that the stress exponent and activation energy depended on temperature and applied stress, respectively. The deformed samples were characterized by high resolution scanning electron microscope (HRSEM) and high resolution transmission electron microscope (HRTEM). The results indicate that the creep mechanism was related to grain boundary sliding, accommodated by dislocation slip and climb. The experimental results, extrapolated to higher temperatures and lower stresses, were in good agreement with data reported in the literature.

Energy and system size dependence of Ξ- and anti Ξ+ production in relativistic heavy-ion collisions at the CERN SPS

International Nuclear Information System (INIS)

Mitrovski, M.K.

2007-01-01

The strong nuclear force is described by Quantum Chromodynamics (QCD), the parallel field theory to Quantum Electrodynamics (QED) that describes the electromagnetic force. It is propagated by gluons analogously to photons in the electromagnetic force, but unlike photons, which do not carry electric charge, gluons carry color, and they can self-interact. However, as individual quarks have never been observed in nature, it is postulated that the color charge itself is confined, and hence all baryons and mesons must be colorless objects. To study nuclear matter under extreme conditions, it is necessary to create hot and dense nuclear matter in the laboratory. In such conditions the confinement between quarks and gluons is cancelled (deconfinement). This state is characterized with a quasi-free behavior of quarks and gluons. The strange (s) and anti-strange (anti-s) quarks are not contained in the colliding nuclei, but are newly produced and show up in the strange hadrons in the final state. It was suggested that strange particle production is enhanced in the QGP with respect to that in a hadron gas. This enhancement is relative to a collision where a transition to a QGP phase does not take place, such as p+p collisions where the system size is very small. Therefore the energy- and system size dependence is studied to receive a picture about the initial state. In this thesis experimental results on the energy- and system size dependence of Xi hyperon production at the CERN SPS is shown. All measurements were performed with the NA49 detector at the CERN SPS. NA49 took central lead-lead collisions from 20 - 158 AGeV, minimus bias lead-lead collisions at 40 and 158 AGeV, and semi-central silicon-silicon collisions at 158 AGeV. The NA49 experiment features a large acceptance in the forward hemisphere allowing for measurements of Xi rapidity spectra. At the SPS accelerator at CERN Pb+Pb collisions are performed with beam energies to 158 AGeV. The analyzed data sets were

Gluon saturation and baryon stopping in the SPS, RHIC, and LHC energy regions

International Nuclear Information System (INIS)

Li Shuang; Feng Shengqin

2012-01-01

A new geometrical scaling method with a gluon saturation rapidity limit is proposed to study the gluon saturation feature of the central rapidity region of relativistic nuclear collisions. The net-baryon number is essentially transported by valence quarks that probe the saturation regime in the target by multiple scattering. We take advantage of the gluon saturation model with geometric scaling of the rapidity limit to investigate net baryon distributions, nuclear stopping power and gluon saturation features in the SPS and RHIC energy regions. Predictions for net baryon rapidity distributions, mean rapidity loss and gluon saturation feature in central Pb + Pb collisions at the LHC are made in this paper. (authors)

Design of a high-precision fast wire scanner for the SPS at CERN

CERN Document Server

Veness, R; Dehning, B; Emery, J; Herranz Alvarez, J; Koujili, M; Samuelsson, S; Sirvent, J-L

2012-01-01

Studies are going on of a new wire scanner concept. All moving parts are inside the beam vacuum and it is specified for use in all the machines across the CERN accelerator complex. Key components have been developed and tested. Work is now focussing on the installation of a prototype for test in the Super Proton Synchrotron (SPS) accelerator. This article presents the specification of the device and constraints on the design for integration in the different accelerators at CERN. The design issues of the mechanical components are discussed and optimisation work shown. Finally, the prototype design, integrating the several components into the vacuum tank is presented.

Reinforcement of poly ether sulphones (PES) with exfoliated graphene oxide for aerospace applications

International Nuclear Information System (INIS)

Balasubramanian, K

2012-01-01

Composite materials have been used for aerospace for some time now and have gained virtually 100% acceptance as the materials of choice. Speciality polymers like poly ether sulphones (PES), poly ether ether ketones(PEEK), poly ether imides (PEI) are highly preferred materials as plastic matrix due to their superior temperature performance, excellent wear and friction resistance, excellent dimensional accuracy, high tensile strength, high modulus, precise machinability and chemical resistance. In recent years nanoadditives like single and multiwall carbon nanotubes, graphenes and graphene oxides(GO) are finding huge market potential in aerospace and automobile industries. But manufacture related factors such as particle/ matrix interphases, surface activation, mixing process, particle agglomeration, particle size and shape may lead to different property effects. In this research GO/PES composites were prepared by high shear melt blending technique. GO monolayers were exfoliated from natural graphite flake and dispersed homogeneously in PES matrix for the GO content ranging between 0.5 to 2.0 volume percentage with a high shear twin screw batch mixer. These melt blended nanocomposites were injection moulded for mechanical property validation of tensile strength, flexural modulus and impact resistance. Addition of 0.5 volume percentage of GO enhanced the tensile strength and flexural modulus by 40% and 90% respectively. The results show that addition of GO to PES increase mechanical properties due to the formation of continuous network, good dispersion and strong interfacial interactions. The strong interfacial interactions were accounted for the increase in glass transition temperature. Also there was a significant improvement in the impact resistance of the PES/ GO nanocomposite. The injection moulded samples were tested for stealth performance by measuring the electromagnetic shielding property.

Ionic Liquid (1-Butyl-3-Metylimidazolium Methane Sulphonate Corrosion and Energy Analysis for High Pressure CO2 Absorption Process

Directory of Open Access Journals (Sweden)

Aqeel Ahmad Taimoor

2018-05-01

Full Text Available This study explores the possible use of ionic liquids as a solvent in a commercial high-pressure CO2 removal process, to gain environmental and energy benefits. There are two main constraints in realizing this: ionic liquids can be corrosive, specifically when mixed with a water/amine solution with dissolved O2 & CO2; and CO2 absorption within this process is not very well understood. Therefore, scavenging CO2 to ppm levels from process gas comes with several risks. We used 1-butyl-3-methylimidazoium methane sulphonate [bmim][MS] as an ionic liquid because of its high corrosiveness (due to its acidic nature to estimate the ranges of expected corrosion in the process. TAFEL technique was used to determine these rates. Further, the process was simulated based on the conventional absorption–desorption process using ASPEN HYSYS v 8.6. After preliminary model validation with the amine solution, [bmim][MS] was modeled based on the properties found in the literature. The energy comparison was then provided and the optimum ratio of the ionic liquid/amine solution was calculated.

The Social Interaction Anxiety Scale (SIAS) and the Social Phobia Scale (SPS): a comparison of two short-form versions.

Science.gov (United States)

Fergus, Thomas A; Valentiner, David P; Kim, Hyun-Soo; McGrath, Patrick B

2014-12-01

The widespread use of Mattick and Clarke's (1998) Social Interaction Anxiety Scale (SIAS) and Social Phobia Scale (SPS) led 2 independent groups of researchers to develop short forms of these measures (Fergus, Valentiner, McGrath, Gier-Lonsway, & Kim, 2012; Peters, Sunderland, Andrews, Rapee, & Mattick, 2012). This 3-part study examined the psychometric properties of Fergus et al.'s and Peters et al.'s short forms of the SIAS and SPS using an American nonclinical adolescent sample in Study 1 (N = 98), American patient sample with an anxiety disorder in Study 2 (N = 117), and both a South Korean college student sample (N = 341) and an American college student sample (N = 550) in Study 3. Scores on both sets of short forms evidenced adequate internal consistency, interitem correlations, and measurement invariance. Scores on Fergus et al.'s short forms, particularly their SIAS short form, tended to capture more unique variance in scores of criterion measures than did scores on Peters et al.'s short forms. Implications for the use of these 2 sets of short forms are discussed. (c) 2014 APA, all rights reserved.

IMPROVEMENT OF THE CERN SPS ELECTROSTATIC SEPTA ION TRAPS

CERN Multimedia

Balhan, Bruno; Barlow, Roger Andrew; Raffaele, Graziano

2016-01-01

At CERN, the SPS synchrotron is equipped with a slow extraction channel towards the fixed target beam lines in the North Area This channel includes five consecutive electrostatic septa, where the field free region and the active high field region are separated by an array of tungsten-rhenium wires. The field-free region provides for the circulating beam, while the high field region is used to deflect the extracted beam. Since the residual gas can be ionized by the orbiting beam, low energy ions could cross the wire array and enter the high field region and cause high voltage breakdown when accelerated onto the cathode. To prevent low energy ions from entering this high electric field region, a vertical field is applied to the orbiting beam using so-called ‘ion traps’ for active protection. The vertical field is created by electrodes placed inside the region containing the circulating beam. Due to electromagnetic coupling onto the ion trap electrodes observed with the high frequency LHC beam (25 ns spaced ...

Proposal for SPS beam time for the baby MIND and TASD neutrino detector prototypes

CERN Document Server

Asfandiyarov, R.; Blondel, A.; Bogomilov, M.; Bross, A.; Cadoux, F.; Cervera, A.; Izmaylov, A.; Karadzhov, Y.; Karpikov, I.; Khabibulin, M.; Khotyantsev, A.; Kopylov, A.; Kudenko, Y.; Matev, R.; Mineev, O.; Musienko, Y.; Nessi, M.; Noah, E.; Rubbia, A.; Shaykiev, A.; Soler, P.; Tsenov, R.; Vankova-Kirilova, G.; Yershov, N.

2015-01-01

The design, construction and testing of neutrino detector prototypes at CERN are ongoing activities. This document reports on the design of solid state baby MIND and TASD detector prototypes and outlines requirements for a test beam at CERN to test these, tentatively planned on the H8 beamline in the North Area, which is equipped with a large aperture magnet. It is hoped that this will allow for the current proposal to be considered in light of the recently approved projects related to neutrino activities with the SPS in the North Area in the medium term 2015-2020.

Zirconia-mullite obtained from co-precipitated zirconia-mullite composite powders by SPS

Energy Technology Data Exchange (ETDEWEB)

Li, H.Z.; Li, Z.J.; Luo, X.D. [Univ. of Science and Technology Liaoning, Anshan (China). School of High Temperature Materials and Magnesium Resource Engineering; Gui, J.Y.; Xie, Z.P. [Tsinghua Univ., Beijing (China). School of Materials Science and Engineering

2016-07-01

The co-precipitation method is used to fabricate precursor powder. This powder is densified by means of the spark plasma sintering (SPS) technique at 1500 C with a holding time of 7 min to prepare zirconia-mullite samples. Their density measures up to 97 % of the theoretical density, and the sintered mullite compacts exhibit better strength properties (289 ± 12 MPa) and H{sub v} (9.99 GPa). The mode of fracture is changed with the addition of ZrO{sub 2} and extensive fine cleavages are observed on the grain surface. These cleavages join together to form steps, which can absorb more energy. The flexural strength of the samples is almost double that of pure mullite, which is related to the formation of cleavages.

The New RF Control System for the CERN SPS Accelerator

CERN Document Server

Baudrenghien, P; Linnecar, Trevor Paul R; Marty, H; Molendijk, J C; Pilchen, Y; Wehrle, U; Weierud, F

1996-01-01

The old SPS RF control system designed in 1972 has been replaced completely, i.e. both hardware and software. The new system has to control both RF equipment conceived during the last 23 years and future (modern) equipment. Using information analysis methods, we derived a model of an RF command and designed a data base accordingly (ORACLE®). Information from this data base is used for command generation and processing and also for archiving settings. The advantage is purely generic software, i.e. the same computer code is used for switching on an RF amplifier, as for setting a frequency synthesizer. New equipment is added very simply by entering new records in the data base. Additional features include a reservation scheme whereby a user can take private control of any piece of equipment, a reporting facility notifying the user of the simultaneous control activity by other users on RF equipment, and a capability scheme assigning a level of expertise to each user restricting action on the equipment.

ORBIT FEEDBACK CONTROL FOR THE LHC Prototyping at the SPS

CERN Document Server

Steinhagen, Ralph J

2004-01-01

The Large Hadron Collider (LHC) is the next generation proton collider that is presently built at CERN. The LHC will be installed in the former LEP (Large Electron Positron Collider) tunnel. The presence of a high intensity beam in an environment of cryogenic magnets requires an excellent control of particle losses from the beam. Eventually the performance of the LHC may be limited by the ability to control the beam losses. The performance of the LHC cleaning system depends critically on the beam position stability. Ground motion, field and alignment imperfections and beam manipulations may cause orbit movements. The role of the future LHC Orbit Feedback System is the minimisation of closed orbit perturbations by periodically measuring and steering the transverse beam position back to its reference position. This diploma thesis focuses on the design and prototyping of an orbit feedback system at the SPS. The design is based on a separation of the steering problem into space and time. While the correction in s...

The SPS Target Station for CHORUS and NOMAD Neutrino Experiments

CERN Document Server

Péraire, S; Zazula, J M

1996-01-01

A new SPS target station, T9, has been constructed for the CHORUS and NOMAD neutrino experiments at CERN. The heart of the station is the target box : 11 beryllium rods are aligned in a cast aluminium box ; they are cooled by a closed circuit helium gas with adjusted flow to each rod. The box is motorised horizontally and vertically at both ends, to remotely optimise the secondary particle production by aligning the target with the incident proton beam. Radiation protection around the station is guaranteed by more than 100 tons of shielding material (iron, copper, marble). This presentation describes briefly the various components of the target station ; it emphasises particularly the thermal and mechanical calculations which define a safe maximum beam intensity on the beryllium rods. Over the first two years of successful operation, the station has received more than 2€1019 protons at 450 GeV/c, with intensity peaks of 2.8€1013 protons per machine cycle.

Characteristics of Combined Submerged Membrane Bioreactor with Granular Activated Carbon (GAC) in Treating Lineal Alkylbenzene Sulphonates (LAS) Wastewater

Science.gov (United States)

Guo, Jifeng; Xia, Siqing; Lu, Yanjun

2010-11-01

A combined MBR (cMBR) with granular activated carbon (GAC) was used as a backbone system to treat the synthetic lineal alkylbenzene sulphonates (LAS) wastewater. The GAC was added in the MBR to improve the resistance of membrane fouling. A parallel conventional MBR (pMBR) without the GAC was run to give a contrast. The results of the process demonstrate that the cMBR process was more efficient than pMBR. It was found that the TMP changes of the cMBR were slower than the pMBR. The results demonstrated that the cMBRs membrane was better than the pMBR's after a clean period run. It was the GAC scrubbing to the membrane that delayed the membrane fouling of the cMBR. Variable critical flux was found in MBR, which showed that the cMBR could make the critical flux better than pMBR in the run time, but GAC could not improve the critical flux at the end of the period for the severe membrane fouling. Based on this theory, a variable critical flux (J) of MBR was put forward, and the relationship of J with time (t) was: J = 16.081e-0.0177t.

Measurement of Nuclear Interaction Rates in Crystal Using the CERN-SPS North Area Test Beams

CERN Document Server

Losito, R; Taratin, A

2010-01-01

A number of tests were performed in the North area of the SPS in view of investigating crystal-particles interactions for future application in hadron colliders. The rate of nuclear interactions was measured with 400 GeV proton beams directed into a silicon bent crystal. In this way the background induced by the crystal either in amorphous or in channeling orientation was revealed. The results provide fundamental information to put in perspective the use of silicon crystals to assist halo collimation in hadron colliders, whilst minimizing the induced loss.

Characterization of alternative electric generation technologies for the SPS comparative assessment: volume 2, central-station technologies

International Nuclear Information System (INIS)

1980-08-01

The SPS Concept Development and Evaluation Program includes a comparative assessment. An early first step in the assessment process is the selection and characterization of alternative technologies. This document describes the cost and performance (i.e., technical and environmental) characteristics of six central station energy alternatives: (1) conventional coal-fired powerplant; (2) conventional light water reactor (LWR); (3) combined cycle powerplant with low-Btu gasifiers; (4) liquid metal fast breeder reactor (LMFBR); (5) photovoltaic system without storage; and (6) fusion reactor

NESSiE: An experimental search for sterile neutrinos with the CERN-SPS beam

Science.gov (United States)

Medinaceli, E.; NESSiE Collaboration

2013-08-01

NESSiE (Neutrino Experiment with SpectrometerS in Europe) is an experiment dedicated to the search for sterile neutrinos beyond the Standard Model with the CERN-SPS neutrino beam. The experiment is based on two identical LAr-TPC's followed by magnetized spectrometers, observing the electron and muon neutrino events at the "Near" (600 m) and "Far" (1300 m) positions from the proton target. The main characteristics of the spectrometers are described here. Spectrometers will exploit a classical dipole magnetic field with iron slabs, and a new concept air-core magnet will perform charge identification and muon momentum measurements in the energy range from ∼ 100 MeV to few GeV over a large transverse area (> 50m2).

Measurement of meson resonance production in π{sup -} + C interactions at SPS energies

Energy Technology Data Exchange (ETDEWEB)

Aduszkiewicz, A.; Dominik, W.; Kuich, M.; Matulewicz, T.; Podlaski, P.; Posiadala, M.; Walewski, M. [University of Warsaw, Warsaw (Poland); Ali, Y.; Brzychczyk, J.; Larsen, D.; Planeta, R.; Richter-Was, E.; Staszel, P.; Wyszynski, O. [Jagiellonian University, Krakow (Poland); Andronov, E.V.; Feofilov, G.A.; Igolkin, S.N.; Kovalenko, V.N.; Lazareva, T.V.; Merzlaya, A.O.; Seryakov, A.Yu.; Valiev, F.F.; Vechernin, V.V. [St. Petersburg State University, St. Petersburg (Russian Federation); Anticic, T.; Kadija, K.; Susa, T. [Ruder Boskovic Institute, Zagreb (Croatia); Baatar, B.; Bunyatov, S.A.; Kireyeu, V.A.; Kolesnikov, V.I.; Krasnoperov, A.; Lyubushkin, V.V.; Malakhov, A.I.; Matveev, V.; Melkumov, G.L.; Tereshchenko, V. [Joint Institute for Nuclear Research, Dubna (Russian Federation); Baszczyk, M.; Dorosz, P.; Kucewicz, W.; Mik, L. [AGH University of Science and Technology, Krakow (Poland); Bhosale, S.; Davis, N.; Kielbowicz, M.; Marcinek, A.; Ozvenchuk, V.; Rybicki, A. [H. Niewodniczanski Institute of Nuclear Physics of the Polish Academy of Sciences, Krakow (Poland); Blondel, A.; Bravar, A.; Damyanova, A.; Haesler, A.; Korzenev, A.; Ravonel, M. [University of Geneva, Geneva (Switzerland); Bogomilov, M.; Kolev, D.; Tsenov, R. [University of Sofia, Faculty of Physics, Sofia (Bulgaria); Brandin, A.; Selyuzhenkov, I.; Strikhanov, M.; Taranenko, A. [National Research Nuclear University (Moscow Engineering Physics Institute), Moscow (Russian Federation); Busygina, O.; Golubeva, M.; Guber, F.; Ivashkin, A.; Kurepin, A.; Sadovsky, A. [Institute for Nuclear Research, Moscow (Russian Federation); Cherif, H.; Deveaux, M.; Klochkov, V.; Koziel, M.; Renfordt, R.; Snoch, A.; Stroebele, H.; Toia, A. [University of Frankfurt, Frankfurt (Germany); Cirkovic, M.; Manic, D.; Puzovic, J. [University of Belgrade, Belgrade (Serbia); Czopowicz, T.; Grebieszkow, K.; Mackowiak-Pawlowska, M.; Maksiak, B.; Slodkowski, M.; Tefelska, A.; Tefelski, D. [Warsaw University of Technology, Warsaw (Poland); Dembinski, H.; Engel, R.; Faas, S.; Garrido, X.; Herve, A.E.; Maris, I.C.; Mathes, H.J.; Roth, M.; Ruprecht, M.; Szuba, M.; Ulrich, R.; Unger, M.; Veberic, D. [Karlsruhe Institute of Technology, Karlsruhe (Germany); Dumarchez, J.; Zambelli, L. [University of Paris VI and VII, LPNHE, Paris (France); Ereditato, A.; Francois, C.; Pistillo, C.; Wilkinson, C. [University of Bern, Bern (Switzerland); Fodor, Z. [Wigner Research Centre for Physics of the Hungarian Academy of Sciences, Budapest (Hungary); University of Wroclaw, Wroclaw (Poland); Garibov, A. [National Nuclear Research Center, Baku (Azerbaijan); Gazdzicki, M. [University of Frankfurt, Frankfurt (Germany); Jan Kochanowski University in Kielce, Kielce (Poland); Hylen, J.; Lundberg, B.; Marchionni, A.; Rameika, R.; Zwaska, R. [Fermilab, Batavia (United States); Johnson, S.R.; Marino, A.D.; Nagai, Y.; Rumberger, B.T.; Zimmerman, E.D. [University of Colorado, Boulder (United States); Kaptur, E.; Kowalski, S.; Lysakowski, B.; Pulawski, S.; Schmidt, K. [University of Silesia, Katowice (Poland); Kowalik, K.; Rondio, E.; Stepaniak, J. [National Centre for Nuclear Research, Warsaw (Poland); Laszlo, A.; Marton, K. [Wigner Research Centre for Physics of the Hungarian Academy of Sciences, Budapest (Hungary); Lewicki, M.; Naskret, M.; Turko, L. [University of Wroclaw, Wroclaw (Poland); Messerly, B.; Paolone, V.; Wickremasinghe, A. [University of Pittsburgh, Pittsburgh (United States); Mills, G.B. [Los Alamos National Laboratory, Los Alamos (United States); Morozov, S.; Petukhov, O. [Institute for Nuclear Research, Moscow (Russian Federation); National Research Nuclear University (Moscow Engineering Physics Institute), Moscow (Russian Federation); Mrowczynski, S.; Rybczynski, M.; Seyboth, P.; Stefanek, G.; Wlodarczyk, Z.; Wojtaszek-Szwarc, A. [Jan Kochanowski University in Kielce, Kielce (Poland); Pavin, M. [Ruder Boskovic Institute, Zagreb (Croatia); University of Paris VI and VII, LPNHE, Paris (France); Popov, B.A. [University of Paris VI and VII, LPNHE, Paris (France); Joint Institute for Nuclear Research, Dubna (Russian Federation); Rauch, W. [Fachhochschule Frankfurt, Frankfurt (Germany); Roehrich, D. [University of Bergen, Bergen (Norway); Rustamov, A. [National Nuclear Research Center, Baku (Azerbaijan); University of Frankfurt, Frankfurt (Germany); Collaboration: The NA61/SHINE Collaboration

2017-09-15

We present measurements of ρ{sup 0}, ω and K{sup *0} spectra in π{sup -} + C production interactions at 158 GeV/c and ρ{sup 0} spectra at 350 GeV/c using the NA61/SHINE spectrometer at the CERN SPS. Spectra are presented as a function of the Feynman's variable x F in the range 0 < x{sub F} < 1 and 0 < x{sub F} < 0.5 for 158 and 350 GeV/c respectively. Furthermore, we show comparisons with previous measurements and predictions of several hadronic interaction models. These measurements are essential for a better understanding of hadronic shower development and for improving the modeling of cosmic ray air showers. (orig.) 5.

Search for the QCD critical point in nuclear collisions at 158A GeV at the CERN Super Proton Synchrotron (SPS)

NARCIS (Netherlands)

Anticic, T.; Botje, M.A.J.|info:eu-repo/dai/nl/070139032; Christakoglou, P.; van Leeuwen, M.|info:eu-repo/dai/nl/250599171

2010-01-01

Pion production in nuclear collisions at the Super Proton Synchrotron (SPS) is investigated with the aim to search, in a restricted domain of the phase diagram, for power laws in the behavior of correlations that are compatible with critical QCD. We analyzed interactions of nuclei of different sizes

KAJIAN ADSORPSI ION LOGAM Cr(VI OLEH ADSORBEN KOMBINASI ARANG AKTIF SEKAM PADI DAN ZEOLIT MENGGUNAKAN METODE SOLID-PHASE SPECTROPHOTOMETRY (SPS

Directory of Open Access Journals (Sweden)

Sulistyo Saputro

2016-10-01

  This study aims to study the use of activated rice husk charcoal and zeolite as combination adsorbents to adsorb Cr(VI metal ions; the effect of the combination adsorbents of activated rice husk charcoal and zeolite’s compositions to adsorb Cr(VI metal ions; and the sensitivity of solid-phase spectrophotometry (SPS as a method to determine the reduced levels of Cr(VI metal ions in the level of 15μ"> g/L. The activated rice husk charcoal used were obtained through the activation process by soaking in a solution of ZnCl2 10% while the zeolite with a solution of H2SO4 10%. The contacting process of the adsorbents with Cr(VI metal ions was done by varying the compositions of the activated rice husk charcoal and zeolite adsorbent, 1:1, 1:2, 1:3, and 2:1. The data analysis of the Cr(VI level used solid-phase spectrophotometry (SPS method. Characterization of activated rice husk charcoal and zeolite used FTIR. The results showed that: (1 a combination of activated rice husk charcoal and zeolite can be used as adsorbent to adsorb Cr(VI metal ions with the adsorption capacity was 0,28 15μ"> g/g; (2 the optimum composition of adsorbents was 1:2 with the percentage of absorption was 40,99%; (3 solid-phase spectrophotometry (SPS is a sensitive method to determine the reduced levels of Cr(VI in the level of 15μ"> g/L with the limit of detection (LOD was 0,021 15μ"> g/L.   Keywords: adsorption, Cr(VI,  activated  rice husk charcoal,  zeolite, solid-phase spectrophotometry

Design Study and Optimization of Irradiation Facilities for Detector and Accelerator Equipment Testing in the SPS North Area at CERN

CERN Document Server

AUTHOR|(CDS)2079748; Stekl, Ivan

Due to increasing performance of LHC during the last years, the strong need of new detector and electronic equipment test areas at CERN appeared from user communities. This thesis reports on two test facilities: GIF++ and H4IRRAD. GIF++, an upgrade of GIF facility, is a combined high-intensity gamma and particle beam irradiation facility for testing detectors for LHC. It combines a high-rate 137Cs source, providing photons with energy of 662 keV, together with the high-energy secondary particle beam from SPS. H4IRRAD is a new mixed-field irradiation area, designed for testing LHC electronic equipment for radiation damage effects. In particular, large volume assemblies such as full electronic racks of high current power converters can be tested. The area uses alternatively an attenuated primary 400 GeV/c proton beam from SPS, or a secondary, mainly proton, beam of 280 GeV/c directed towards a copper target. Different shielding layers are used to reproduce a radiation field similar to the LHC “tunnel” and �...

Results of a beam dump experiment at the CERN SPS neutrino facility

Directory of Open Access Journals (Sweden)

T. Hansl

1978-03-01

Full Text Available We report results from a beam dump experiment that has been performed at the CERN SPS neutrino facility using the CDHS neutrino counter detector. Limits on dimuon and trimuon production by new penetrating neutral particles are given. A new source of prompt electron and muon neutrinos has been observed giving (1.2±0.4× 10−7 νe or νμ per incident proton with neutrino angle smaller than 1.85 mrad and Eν > 20 GeV. If these prompt neutrinos are attributed to charmed meson pair production, the inclusive DD production cross section could be of the order of 30 ωb. If axions are existing their production rate relative to π0 mesons is found to be less than 0.5 × 10−8.

J/$\\psi$ production in proton-nucleus and nucleus-nucleus interactions at the CERN SPS

CERN Document Server

Abreu, M C; Alexa, C; Arnaldi, R; Ataian, M R; Baglin, C; Baldit, A; Bedjidian, Marc; Beolè, S; Boldea, V; Bordalo, P; Borges, G; Bussière, A; Capelli, L; Castanier, C; Castor, J I; Chaurand, B; Chevrot, I; Cheynis, B; Chiavassa, E; Cicalò, C; Claudino, T; Comets, M P; Constans, N; Constantinescu, S; Cortese, P; De Falco, A; De Marco, N; Dellacasa, G; Devaux, A; Dita, S; Drapier, O; Ducroux, L; Espagnon, B; Fargeix, J; Force, P; Gallio, M; Gavrilov, Yu K; Gerschel, C; Giubellino, P; Golubeva, M B; Gonin, M; Grigorian, A A; Grossiord, J Y; Guber, F F; Guichard, A; Gulkanian, H R; Hakobyan, R S; Haroutunian, R; Idzik, M; Jouan, D; Karavitcheva, T L; Kluberg, L; Kurepin, A B; Le Bornec, Y; Lourenço, C; Macciotta, P; MacCormick, M; Marzari-Chiesa, A; Masera, M; Masoni, A; Monteno, M; Musso, A; Petiau, P; Piccotti, A; Pizzi, J R; Prado da Silva, W L; Prino, F; Puddu, G; Quintans, C; Ramello, L; Ramos, S; Rato-Mendes, P; Riccati, L; Romana, A; Santos, H; Saturnini, P; Scalas, E; Scomparin, E; Serci, S; Shahoyan, R; Sigaudo, F; Silva, S; Sitta, M; Sonderegger, P; Tarrago, X; Topilskaya, N S; Usai, G L; Vercellin, Ermanno; Villatte, L; Willis, N

2002-01-01

The NA38 and NA50 experiments at the CERN SPS have measured charmonium production in different colliding systems with the aim of observing a phase transition from ordinary hadronic matter towards a state in which quarks and gluons are deconfined (quark-gluon plasma, QGP). This experimental research is based on the prediction that the J/ psi yield should be suppressed in deconfined matter. The analysis of the data collected by the NA50 experiment with Pb-Pb collisions at 158 GeV/c per nucleon shows that the J/ psi is anomalously suppressed with respect to the pattern observed in proton-nucleus and light ion reactions. (9 refs).

Heat load and deuterium plasma effects on SPS and WSP tungsten

Directory of Open Access Journals (Sweden)

Vilémová Monika

2015-06-01

Full Text Available Tungsten is a prime choice for armor material in future nuclear fusion devices. For the realization of fusion, it is necessary to address issues related to the plasma–armor interactions. In this work, several types of tungsten material were studied, i.e. tungsten prepared by spark plasma sintering (SPS and by water stabilized plasma spraying (WSP technique. An intended surface porosity was created in the samples to model hydrogen/helium bubbles. The samples were subjected to a laser heat loading and a radiation loading of deuterium plasma to simulate edge plasma conditions of a nuclear fusion device (power density of 108 W/cm2 and 107 W/cm2, respectively, in the pulse intervals up to 200 ns. Thermally induced changes in the morphology and the damage to the studied surfaces are described. Possible consequences for the fusion device operation are pointed out.

Transverse momentum spectra of hadrons in p + p collisions at CERN SPS energies from the UrQMD transport model

Science.gov (United States)

Ozvenchuk, V.; Rybicki, A.

2018-05-01

The UrQMD transport model, version 3.4, is used to study the new experimental data on transverse momentum spectra of π±, K±, p and p bar produced in inelastic p + p interactions at SPS energies, recently published by the NA61/SHINE Collaboration. The comparison of model predictions to these new measurements is presented as a function of collision energy for central and forward particle rapidity intervals. In addition, the inverse slope parameters characterizing the transverse momentum distributions are extracted from the predicted spectra and compared to the corresponding values obtained from NA61/SHINE distributions, as a function of particle rapidity and collision energy. A complex pattern of deviations between the experimental data and the UrQMD model emerges. For charged pions, the fair agreement visible at top SPS energies deteriorates with the decreasing energy. For charged K mesons, UrQMD significantly underpredicts positive kaon production at lower beam momenta. It also underpredicts the central rapidity proton yield at top collision energy and overpredicts antiproton production at all considered energies. We conclude that the new experimental data analyzed in this paper still constitute a challenge for the present version of the model.

New ISR and SPS collider multiplicity data and the Golokhvastov generalization of the KNO scaling

International Nuclear Information System (INIS)

Szwed, R.; Wrochna, G.

1985-01-01

The generalization of KNO scaling proposed by Golokhvastov (KNO-G scaling) is tested using pp multiplicity data, in particular results of the new high precision ISR measurements. Since the data obey KNO-G scaling over the full energy range √s=2.51-62.2 GeV with the scaling function psi(z), having only one free parameter, the superiority of the KNO-G over the standard approach is clearly demonstrated. The extrapolation within KNO-G scaling to the SPS Collider energy range and a comparison with the recent UA5 multiplicity results is presented. (orig.)

Differences in high $p_{t}$ meson production between CERN SPS and RHIC heavy ion collisions

CERN Document Server

Papp, G; Barnafoldi, G G; Yi Zhang; Fái, G; Papp, Gabor; Levai, Peter; Barnafoldi, Gergely G.; Zhang, Yi; Fai, George

2001-01-01

In this talk we present a perturbative QCD improved parton model calculation for light meson production in high energy heavy ion collisions. In order to describe the experimental data properly, one needs to augment the standard pQCD model by the transverse momentum distribution of partons ("intrinsic k/sub T/"). Proton-nucleus data indicate the presence of nuclear shadowing and multi-scattering effects. Further corrections are needed in nucleus-nucleus collisions to explain the observed reduction of the cross section. We introduce the idea of proton dissociation and compare our calculations with the SPS and RHIC experimental data. (18 refs).

Sintering of ZrC by hot isostatic pressing (HIP) and spark plasma sintering (SPS). Effect of impurities

International Nuclear Information System (INIS)

Allemand, Alexandre; Le Flem - Dormeval, Marion; Guillard, Francois

2005-01-01

Carbides are generally used as structural materials for high temperature applications. Particularly, ZrC because of low activation, neutronic transparency, cubic structure (isotropic behaviour) and good thermal conductivity, is one of the candidates under consideration for structural materials in the core of new high temperature nuclear reactors (Generation IV). Just a few studies about densification of monolithic ZrC exist. They mainly involve natural sintering or hot pressing at high temperature (until 2700 deg. C). Unfortunately those processes induce grain growth and do not lead to fully densified ZrC. The aim of this study is to compare the characteristics and the properties of ZrC sintered by HIP and by SPS. Fully dense ZrC can be reached either by HIP or by SPS, grain size being more or less controlled. Microstructural observations and mechanical testing of several ZrC grades shows that powder impurities play an important role in the quality of the grain boundaries and consequently in the mechanical properties. In particular, the porosity falls from 17% to 3 % just by reducing the free carbon content in starting ZrC powder. The densification process of dense monolithic ZrC was improved by combining a HIP at 1600 deg. C (titanium canning) followed by a post-HIP at 1900 deg. C (no canning required). Four-point bending tests are in progress to confirm the improvement of fracture strength. (authors)

Energy and system size dependence of {xi}{sup -} and anti {xi}{sup +} production in relativistic heavy-ion collisions at the CERN SPS

Energy Technology Data Exchange (ETDEWEB)

Mitrovski, M.K.

2007-11-21

The strong nuclear force is described by Quantum Chromodynamics (QCD), the parallel field theory to Quantum Electrodynamics (QED) that describes the electromagnetic force. It is propagated by gluons analogously to photons in the electromagnetic force, but unlike photons, which do not carry electric charge, gluons carry color, and they can self-interact. However, as individual quarks have never been observed in nature, it is postulated that the color charge itself is confined, and hence all baryons and mesons must be colorless objects. To study nuclear matter under extreme conditions, it is necessary to create hot and dense nuclear matter in the laboratory. In such conditions the confinement between quarks and gluons is cancelled (deconfinement). This state is characterized with a quasi-free behavior of quarks and gluons. The strange (s) and anti-strange (anti-s) quarks are not contained in the colliding nuclei, but are newly produced and show up in the strange hadrons in the final state. It was suggested that strange particle production is enhanced in the QGP with respect to that in a hadron gas. This enhancement is relative to a collision where a transition to a QGP phase does not take place, such as p+p collisions where the system size is very small. Therefore the energy- and system size dependence is studied to receive a picture about the initial state. In this thesis experimental results on the energy- and system size dependence of Xi hyperon production at the CERN SPS is shown. All measurements were performed with the NA49 detector at the CERN SPS. NA49 took central lead-lead collisions from 20 - 158 AGeV, minimus bias lead-lead collisions at 40 and 158 AGeV, and semi-central silicon-silicon collisions at 158 AGeV. The NA49 experiment features a large acceptance in the forward hemisphere allowing for measurements of Xi rapidity spectra. At the SPS accelerator at CERN Pb+Pb collisions are performed with beam energies to 158 AGeV. The analyzed data sets were

NESSiE: An experimental search for sterile neutrinos with the CERN-SPS beam

International Nuclear Information System (INIS)

Medinaceli, E.

2013-01-01

NESSiE (Neutrino Experiment with SpectrometerS in Europe) is an experiment dedicated to the search for sterile neutrinos beyond the Standard Model with the CERN-SPS neutrino beam. The experiment is based on two identical LAr-TPC's followed by magnetized spectrometers, observing the electron and muon neutrino events at the “Near” (600 m) and “Far” (1300 m) positions from the proton target. The main characteristics of the spectrometers are described here. Spectrometers will exploit a classical dipole magnetic field with iron slabs, and a new concept air-core magnet will perform charge identification and muon momentum measurements in the energy range from ∼100MeV to few GeV over a large transverse area (>50m 2 )

NESSiE: An experimental search for sterile neutrinos with the CERN-SPS beam

Energy Technology Data Exchange (ETDEWEB)

Medinaceli, E., E-mail: medinaceli@pd.infn.it [INFN and University of Padova (Italy)

2013-08-01

NESSiE (Neutrino Experiment with SpectrometerS in Europe) is an experiment dedicated to the search for sterile neutrinos beyond the Standard Model with the CERN-SPS neutrino beam. The experiment is based on two identical LAr-TPC's followed by magnetized spectrometers, observing the electron and muon neutrino events at the “Near” (600 m) and “Far” (1300 m) positions from the proton target. The main characteristics of the spectrometers are described here. Spectrometers will exploit a classical dipole magnetic field with iron slabs, and a new concept air-core magnet will perform charge identification and muon momentum measurements in the energy range from ∼100MeV to few GeV over a large transverse area (>50m{sup 2})

The RTC - a software support system for the control of the CERN SPS

International Nuclear Information System (INIS)

Herr, W.; Lauckner, R.; Morpurga, G.

1989-01-01

The RTC (Run Time Coordinator) is a software support system designed for the SPS control system to provide a runtime environment for application software. It coordinates the execution of individual programs or processes and supervises the process control, i.e. process synchronization, inter process communication, data transfer and operator I/O. This supervision includes the control of processes distributed on a UNIX based network. A standard language independent data interface is part of the system. The system includes tools for data presentation, error logging and contention resolution. This strategy of separating system dependent features from the body of the application programs leads to high flexibility and simplifies the software development. The basic philosophy of the RTC is discussed and its implementation is described. 7 refs

Hadroproduction of charmonium Χ states at the SPS

International Nuclear Information System (INIS)

Lemoigne, Y.

1988-06-01

The observation of hadroproduced charmonium Χ states requires a good resolution to disentangle states of similar masses (45 MeV of difference for masses larger than 3500 MeV). The WA11 experiment was able to distinguish the two Χ(3510) and Χ(3555) states, measure their cross-section in π-beryllium at 185 GeV/c and give a ratio of contribution of this to J/Ψ production (17.7 % and 12.8 % respectively). A refined analysis of Χ-states events has shown different processes in the π-production of these states. At 185 GeV/c, the Χ(3555) comes mainly from gluon-gluon fusion, but the Χ(3510) is equally produced by quark-antiquark fusion and gluon-gluon fusion. One finds that different graphs can be envisaged, both in colour conservation as well as in colour evaporation, to contribute to charmonium state production given by simple counting rules. Using our data at 185 GeV/c and the usual structure function (like the DUKE-OWEN's ones), we are able to compute the J/Ψ, Χ 1 , and Χ 2 π-production at any other SPS energy. This calculation gives values in agreement with results from the Ω group (for J/Ψ) and the ''GAMS'' group (for Χ), at 40 GeV/c [fr

Sintering, consolidation, reaction and crystal growth by the spark plasma system (SPS)

Energy Technology Data Exchange (ETDEWEB)

Omori, M. [Tohoku Univ., Sendai (Japan). Inst. for Materials Research

2000-08-15

The graphite die set in spark plasma system (SPS) is heated by a pulse direct current. Weak plasma, discharge impact, electric field and electric current, which are based on this current, induce good effects on materials in the die. The surface films of aluminum and pure WC powders are ruptured by the spark plasma. Pure AlN powder is sintered without sintering additives in the electric field. The spark plasma leaves discharge patterns on insulators. Organic fibers are etched by the spark plasma. Thermosetting polyimide is consolidated by the spark plasma. Insoluble polymonomethylsilane is rearranged into the soluble one by the spark plasma. A single crystal of CoSb{sub 3} is grown from the compound powders in the electric field by slow heating. Coupled crystals of eutectic powder are connected with each other in the electric field. (orig.)

Higher brightness beams from the SPS for the HL-LHC era

CERN Document Server

AUTHOR|(CDS)2085448; Bracco, Chiara (CERN)

The need to push the LHC beyond its limits and increase the deliverable luminosity to the experiments by about one order of magnitude has driven the ongoing injector and HL-LHC upgrades. The higher luminosity requires to increase the beam brightness, which directly translates in the need to adapt the different machine protection systems. Among all the foreseen upgrades, the transfer line collimators (TCDI) and the LHC injection protection systems will be revised. In particular, the guaranteed protection is evaluated in this Ph D work, together with the specification for the minimum shielded aperture in case of injection failures. A detailed model is also developed which insures a more reliable and efficient procedure for the validation of the TCDI setup within the required accuracy. The physics beyond colliders will also be pushed over its current limits in the HL-LHC era. SHiP, a new proposed fixed target experiment served by the SPS is under study. The unprecedented level of requested protons on target per ...

A 2006 SPS Summer Intern’s Experiences, Reflections, and Future Ambitions

Science.gov (United States)

Deml, Ann

2006-12-01

As a SPS Summer Intern from the University of Wisconsin-River Falls, I spent nine weeks in the Washington, D.C. area working with the American Physical Society. My work dealt primarily with the development of a ComPADRE outreach website, Physics To Go, which offers the public opportunities to engage in informal physics learning. Specific tasks that I performed included locating content to feature on the homepage, obtaining photographer permissions, and cataloging quality websites into the digital library. At the conclusion of the summer, I accepted an offer to continue working on Physics To Go and have further contributed to its expansion. Participating in this internship has influenced my life in several respects, and as a result, I will be enrolling in a graduate program this coming year. Additionally, I am making plans to participate in a National Student Exchange program and am considering a career with a greater emphasis on research. The internship has served as an invaluable and irreplaceable experience.

Study of problems met in muon pattern recognition for a deep inelastic scattering experiment at the S.P.S

International Nuclear Information System (INIS)

Besson, C.

1976-01-01

The problems of the muon pattern recognition are studied for a muon-proton deep inelastic scattering experiment at the S.P.S. The pattern recognition program is described together with the problems caused by some characteristics of the apparatus of the European muon collaboration. Several reconstruction technics are compared, and a way of handling big drift chamber problems is found. Some results on Monte-Carlo tracks are given [fr

Measurements of quadrupole frequency shift in the SPS at 26 GeV/c

CERN Document Server

Bohl, T; Shaposhnikova, E; Tückmantel, Joachim; CERN. Geneva. AB Department

2008-01-01

Measurements of the quadrupole frequency shift with intensity at 26 GeV/c using the peak detected signal were performed in the SPS from 1999 to monitor the evolution of the low-frequency longitudinal impedance [1]. While the large changes, first, due to the impedance reduction and then due to the re-installation of the MKE kickers,are easy to see, to observe small variations of impedance (as shielding or removal of a few kickers) much higher accuracy of measurements is required. This was difficult to achieve so far, mainly due to the insufficient reproducibility of the longitudinal parameters of the injected beam for different intensities as well as for different MDs. In this Note the important role of longitudinal emittance in addition to the bunch length is also revealed.

Effect of intracolonic benzalkonium chloride on trinitrobenzene sulphonic acid-induced colitis in the rat.

Science.gov (United States)

Miampamba, M; Parr, E J; McCafferty, D M; Wallace, J L; Sharkey, K A

1998-03-01

We investigated the effects of benzalkonium chloride (BAC) on trinitrobenzene sulphonic acid (TNBS)-induced colitis in rats. TNBS was administered intrarectally before and/or after BAC treatment. In the first study, the effects of treatment with BAC 6, 12 or 24 h after TNBS were examined. In the second study, animals were treated with BAC before, after or before and after TNBS, and were examined 7 days later. The severity of colitis was assessed by macroscopic and histological scoring of the colonic damage and by determination of colonic myeloperoxidase (MPO) activity. Macrophages and CD4+ and CD8+ T cells were examined by immunohistochemistry. When BAC was instilled into the colon 6, 12 or 24 h after TNBS, weight loss and macroscopic and histological features of the colon were similar to that of controls (TNBS alone). In contrast, MPO activity was significantly reduced in all three groups post-treated with BAC. In the groups examined 7 days after TNBS treatment, rats post-treated with BAC exhibited increased weight gain and significantly reduced macroscopic damage and MPO activity compared to the TNBS control group. Rats pre-treated with BAC exhibited less macroscopic damage of the colon than rats receiving only TNBS, but histological damage, MPO and weight gain were unchanged from TNBS controls. Immunohistochemistry revealed that BAC pre-treatment increased the numbers of macrophages and T cells in the colon. After TNBS treatment, macrophage accumulation was evident in the colon, but T cells were scarce. However, these cells were preserved or enhanced in the colonic mucosa in TNBS-treated rats that had been pre-treated with BAC. Treatment with BAC, particularly after induction of colitis, produces a significant reduction in the severity of tissue injury and inflammation through mechanisms that are not fully understood.

Combination of rice husk and coconut shell activated adsorbent to adsorb Pb(II) ionic metal and it’s analysis using solid-phase spectrophotometry (sps)

Science.gov (United States)

Rohmah, D. N.; Saputro, S.; Masykuri, M.; Mahardiani, L.

2018-03-01

The purpose of this research was to know the effect and determine the mass comparation which most effective combination between rice husk and coconut shell activated adsorbent to adsorb Pb (II) ion using SPS method. This research used experimental method. Technique to collecting this datas of this research is carried out by several stages, which are: (1) carbonization of rice husk and coconut shell adsorbent using muffle furnace at a temperature of 350°C for an hour; (2) activation of the rice husk and coconut shell adsorbent using NaOH 1N and ZnCl2 15% activator; (3) contacting the adsorbent of rice husk and coconut shell activated adsorbent with liquid waste simulation of Pb(II) using variation comparison of rice husk and coconut shell, 1:0; 0:1; 1:1; 2:1; 1:2; (4) analysis of Pb(II) using Solid-Phase Spectrophotometry (SPS); (5) characterization of combination rice husk and coconut shell activated adsorbent using FTIR. The result of this research show that the combined effect of combination rice husk and coconut shell activated adsorbent can increase the ability of the adsorbent to absorb Pb(II) ion then the optimum adsorbent mass ratio required for absorbing 20 mL of Pb(II) ion with a concentration of 49.99 µg/L is a ratio of 2:1 with the absorption level of 97,06%Solid-Phase Spectrophotometry (SPS) is an effective method in the level of µg/L, be marked with the Limit of Detection (LOD) of 0.03 µg/L.

Methylmethane-sulphonate and X-ray-induced mutations in the Chinese hamster hprt gene: mRNA phenotyping using polymerase chain reactions

International Nuclear Information System (INIS)

Chaudhry, M.A.; Fox, Margaret

1990-01-01

Alterations in the hprt gene of Chinese hamster cells were determined in 71 spontaneous, methylmethane sulphonate (MMS)-and X-ray induced mutants, using the Southern blot hybridization technique. To investigate the possibility of small deletions, MMS-induced mutants were studied with proves derived from exons 3 and 9 but no evidence of specific deletion of these two exons was found. The polymerase chain reaction (PCR) was used to phenotype hprt transcripts in 48 MMS, X-ray and spontaneous Chinese hamster mutants by amplifying the coding region of their cDNA. Among 22 MMS-induced mutants the message was present in 16 instances. An analysis of 20 X-ray-induced mutants showed the presence of hprt mRNA in 11 of them with five having low levels of transcription. Among six spontaneous mutants, four were negative for mRNA on standard Northern blots and in one the message was only detected after PCR amplification. Direct DNA sequencing of 10 mutants revealed the presence of base substitutions in five of them while a 7 bp deletion was found in another. No mutations were found in another four mutants, suggesting the presence of mutation outside the coding region. (author)

A report of two cases of Al-Awadi Raas-Rothschild syndrome (AARRS) supporting that "apparent" Phocomelia differentiates AARRS from Schinzel Phocomelia syndrome (SPS).

Science.gov (United States)

AlQattan, Mohammad M; AlAbdulkareem, Ibrahim; Ballow, Mariam; Al Balwi, Mohammed

2013-09-15

Although there is a long list of syndromes with phocomelia, there are only two syndromes in which there is concurrent pelvic dysplasia and phocomelia: Al-Awadi-Raas-Rothschild syndrome (AARRS) and Schinzel phocomelia syndrome (SPS). Currently, there is a diagnostic confusion between the two syndromes and both have the same MIM entry (MIM 276820). We believe that the two syndromes are different entities and we also believe that the limb defect in SPS is a "true" phocomelia while the limb defect in AARRS is an "apparent" phocomelia. "Apparent" phocomelia describes the most severe form of ulnar ray deficiency in which there is absent ulna with radio-humeral synostosis. "Apparent" phocomelia is diagnosed radiologically by three radiological features: the apparently single bone occupying the arm/forearm appears relatively long, the area of radio-humeral synostosis will have thicker cortex with or without slight angulation, and the lower end of the bone resembles the lower end of a radius and not a humerus. In this paper, we present two new cases of AARRS from two different Saudi Arabian tribes: one case with R292C mutation of WNT7A with bilateral "apparent" phocomelia and a second case with a novel c.814G>T mutation of the WNT7A gene (resulting in wnt7a protein truncation at position 272) with unilateral "apparent" phocomelia. We reviewed previously reported cases of AARRS and SPS to further delineate the differences between these two syndromes. We make the argument that these two syndromes are two different entities and hence require two different MIM entries. Copyright © 2013 Elsevier B.V. All rights reserved.

Enhanced production of low-mass electron-positron pairs in 40-AGeV Pb-Au collisions at the CERN SPS.

Science.gov (United States)

Adamová, D; Agakichiev, G; Appelshäuser, H; Belaga, V; Braun-Munzinger, P; Cherlin, A; Damjanović, S; Dietel, T; Dietrich, L; Drees, A; Esumi, S I; Filimonov, K; Fomenko, K; Fraenkel, Z; Garabatos, C; Glässel, P; Hering, G; Holeczek, J; Kushpil, V; Lenkeit, B; Maas, A; Marín, A; Milosević, J; Milov, A; Miśkowiec, D; Panebrattsev, Yu; Petchenova, O; Petrácek, V; Pfeiffer, A; Rak, J; Ravinovich, I; Rehak, P; Richter, M; Sako, H; Schmitz, W; Sedykh, S; Seipp, W; Sharma, A; Shimansky, S; Slívová, J; Specht, H J; Stachel, J; Sumbera, M; Tilsner, H; Tserruya, I; Wessels, J P; Wienold, T; Windelband, B; Wurm, J P; Xie, W; Yurevich, S; Yurevich, V

2003-07-25

We report on first measurements of low-mass electron-positron pairs in Pb-Au collisions at the CERN SPS beam energy of 40 AGeV. The observed pair yield integrated over the range of invariant masses 0.2e(+)e(-) annihilation with a modified rho propagator. They may be linked to chiral symmetry restoration and support the notion that the in-medium modifications of the rho are more driven by baryon density than by temperature.

Enhanced production of low-mass electron-positron pairs in 40-AGeV Pb-Au collisions at the CERN SPS

CERN Document Server

Adamova, D; Appelshäuser, H; Belaga, V; Braun-Munzinger, P; Cherlin, A; Damjanovic, S; Dietel, T; Dietrich, L; Drees, A; Esumi, S I; Filimonov, K; Fomenko, K; Fraenkel, Zeev; Garabatos, C; Glässel, P; Hering, G; Holeczek, J; Kushpil, V; Lenkeit, B C; Maas, A; Marin, A; Milosevic, J; Milov, A; Miskowiec, D; Panebratsev, Yu A; Petchenova, O Yu; Petracek, V; Pfeiffer, A; Rak, J; Ravinovich, I; Rehak, P; Richter, M; Sako, H; Schmitz, W; Sedykh, S; Seipp, W; Sharma, A; Shimansky, S S; Slivova, J; Specht, H J; Stachel, J; Sumbera, M; Tilsner, H; Tserruya, Itzhak; Wessels, J P; Wienold, T; Windelband, B; Wurm, J P; Xie, W; Yurevich, S; Yurevich, V I

2003-01-01

We report on first measurements of low-mass electron pairs in Pb-Au collisions at the lower SPS beam energy of 40 AGeV. The pair yield integrated over the range of invariant masses 0.2 e+ e- annihilation with a modified rho-propagator. They may be linked to chiral symmetry restoration and support the notion that the in-medium modifications of the rho are more driven by baryon density than by temperature.

Simulation study of electron cloud build up in the SPS MKD kickers

CERN Document Server

Rumolo, G

2009-01-01

During the 2008 run, an unusual behavior characterizing pressure and temperature increase in some of the dump kickers of the SPS was noticed. In particular, it was observed that 1) the MKDV2 kicker would exhibit maximum heating with 75 ns spaced LHC beams and 2) the pressure rise was specially critical in MKDV1 in presence of 50 ns spaced LHC beams [1]. While the anomalous heating of MKDV2 with 75 ns beams could be tentatively explained by the denser beam current spectrum that would more likely hit one of the kicker impedance peaks, the fast pressure rise in MKDV1 with 50 ns spaced beams was ascribed to a surface effect, namely beam induced multipacting leading to electron cloud formation. This report summarizes a simulation study that was done in order to check whether the electron cloud behavior in the dump kickers could explain the experimental observations.

As medidas aplicadas aos acordos SPS e TBT sobre as exportações brasileiras de fumo

Directory of Open Access Journals (Sweden)

Carlos Otávio de Freitas

2015-11-01

Full Text Available O presente estudo tem como objetivo analisar os efeitos das medidas não tarifárias, especificamente as medidas sanitárias e fitossanitárias - SPS e medidas técnicas - TBT, sobre as exportações brasileiras de fumo e se tais efeitos permaneceram nos períodos subsequentes à emissão das notificações. Para tal, foi estimado um modelo gravitacional utilizando uma amostra de 89 países importadores do fumo do Brasil entre o período de 1997 a 2011. O método utilizado na estimação das equações foi o modelo Poisson-Pseudo Maximum Likehood-PPML. Os resultados obtidos mostram que as medidas ou SPS afetaram negativamente o fluxo internacional do comércio de fumo. Além disso, verificou-se que esses efeitos perduraram nos períodos posteriores à emissão da notificação, sendo que as empresas exportadores podem demorar até dois anos para se ajustarem às exigências requeridas. Dentre os objetivos das notificações SPS, a maior parte está relacionada a medidas para proteção da saúde humana e proteção da planta, o que pode explicar a maior dificuldade de adequação, pois são exigências que demandam grandes investimentos. Já as medidas TBT não foram estatisticamente significativas, confirmando o caráter não restritivo dessas notificações sobre o comércio internacional de fumo. Apesar da maior parte das notificações ao fumo estarem associadas a medidas técnicas, os resultados indicaram que elas não configuraram como barreiras ao comércio de fumo. Isso pode sugerir que as exigências a elas referidas, que, em sua grande maioria, foi referente à rotulagem e/ou embalagem, foram atendidas pelo Brasil sem maiores dificuldades. Dessa forma, torna-se importante a inclusão de questões referentes à regulamentação dessas medidas nas discussões e processos de tomada de decisão das empresas exportadoras de fumo. Em termos de ações governamentais, seria interessante a criação ou aperfeiçoamento de políticas no sentido

SPS microwave subsystem potential impacts and benefits. [environmental and societal effects of Solar Power System construction and operation

Science.gov (United States)

Dickinson, R. M.

1978-01-01

The paper examines the possible environmental and societal effects of the construction, installation, and operation of the space end and earth end of the microwave power transmission subsystem that delivers satellite power system (SPS) energy (at about 5 GW per beam) to the power grid on earth. The intervening propagation medium near the earth is also considered. Separate consideration is given to the spacecraft transmitting array, propagation in the ionosphere, and the ground-based rectenna. Radio frequency interference aspects are also discussed.

The new generation of PowerPC VMEbus front end computers for the CERN SPS and LEP accelerators system

OpenAIRE

Charrue, P; Bland, A; Ghinet, F; Ribeiro, P

1995-01-01

The CERN SPS and LEP PowerPC project is aimed at introducing a new generation of PowerPC VMEbus processor modules running the LynxOS real-time operating system. This new generation of front end computers using the state-of-the-art microprocessor technology will first replace the obsolete XENIX PC based systems (about 140 installations) successfully used since 1988 to control the LEP accelerator. The major issues addressed in the scope of this large scale project are the technical specificatio...

The vascular effects of sodium tanshinone IIA sulphonate in rodent and human pregnancy.

Directory of Open Access Journals (Sweden)

Jude S Morton

Full Text Available Danshen, in particular its derivative tanshinone IIA (TS, is a promising compound in the treatment of cardiovascular diseases and has been used for many years in traditional Chinese medicine. Although many actions of TS have been researched, its vasodilator effects in pregnancy remain unknown. There have been a few studies that have shown the ability of TS to reduce blood pressure in women with hypertensive pregnancies; however, there are no studies which have examined the vascular effects of TS in the pregnant state in either normal or complicated pregnancies. Our aim was to determine the vasoactive role of TS in multiple arteries during pregnancy including: rat resistance (mesenteric and uterine and conduit (carotid arteries. Further, we aimed to assess the ability of TS to improve uterine blood flow in a rodent model of intrauterine growth restriction. Wire myography was used to assess vascular responses to the water-soluble derivative, sodium tanshinone IIA sulphonate (STS or to the endothelium-dependent vasodilator, methylcholine. At mid-pregnancy, STS caused direct vasodilation of rat resistance (pEC50 mesenteric: 4.47±0.05 and uterine: 3.65±0.10 but not conduit (carotid arteries. In late pregnancy, human myometrial arteries responded with a similar sensitivity to STS (pEC50 myometrial: 3.26±0.13. STS treatment for the last third of pregnancy in eNOS-/- mice increased uterine artery responses to methylcholine (Emax eNOS-/-: 55.2±9.2% vs. eNOS-/- treated: 75.7±8.9%, p<0.0001. The promising vascular effects, however, did not lead to improved uterine or umbilical blood flow in vivo, nor to improved fetal biometrics; body weight and crown-rump length. Further, STS treatment increased the uterine artery resistance index and decreased offspring body weight in control mice. Further research would be required to determine the safety and efficacy of use of STS in pregnancy.

Measurement of direct CP-violation with the NA48 experiment at the CERN SPS

CERN Document Server

Blümer, H

1999-01-01

The NA48 experiment at the CERN SPS uses simultaneous, nearly collinear beams of long-lived and short-lived neutral kaons to measure the direct CP-violation parameter epsilon '/ epsilon using the double ratio method to an overall accuracy of 2.10/sup -4/, three times better than previous results. The detector has been installed and commissioned in 1995 and 1996. First physics data were recorded during 42 days in fall 1997 yielding more events than the previous experiment NA31. The talk presents the apparatus performance, data quality, the current status of the physics analysis and ongoing activities. The experiment has performed another data run from May to September 1998, which has given a substantial increase in statistics. (11 refs).

Sanitary and phytosanitary legislation in the Russian Federation: a general overview in light of the WTO SPS Agreement and EU principles of food safety / Irina Kireeva, Robert Black

Index Scriptorium Estoniae

Kireeva, Irina

2010-01-01

Maailma Kaubandusorganisatsiooni (WTO) eeskirjadest sanitaar-ja fütosanitaarmeetmete (SPS) kohta ja Euroopa Liidu vastavate õigusaktidest. Pestitsiidide ja põllumajanduskemikaalide tehnilistest normidest. Sanitaar- ja fütosanitaarmeetmete rakendamise lepingust (1995)

Electrodeposited CuInS2 Using Dodecylbenzene Sulphonic Acid As a Suspending Agent for Thin Film Solar Cell

Directory of Open Access Journals (Sweden)

Shaker Ebrahim

2012-01-01

Full Text Available CulnS2 thin films were electrochemically deposited onto fluoride-doped tin oxide (FTO substrate in presence of dodecylbenzene sulphonic acid to adjust pH of the solution and as a suspending agent for the sulfur. Cyclic voltammetry and chronoamperometry were carried out to determine the optimum pH. The composition, crystallinity, and optical properties of the compounds synthesized were studied by energy dispersive X-ray (EDX, X-ray diffraction, and UV-Visible spectra. It was found that the increasing of pH shifts the electrodeposited voltage toward more negative and lowers the deposition current. It was concluded that CuInS2 with atomic stoichiometric ratio was prepared at pH equal to 1.5 and 150 ml of 0.1 M sodium thiosulphate, 5 ml of 0.1 M indium chloride, and 5 ml of 0.1 M cupper chloride. The energy gaps were calculated to be 1.95 and 2.2 eV for CuInS2 prepared at 1.5 and 2.5 of pH, respectively. It was found that sc, oc, and are 1.02×10−4 A/cm2, 0.52 V, and 1.3×10−2%, respectively, for FTO/CuInS2/ZnO/FTO heterojunction solar cell.

Optimizing of SPS pressed SrFe12O19 pellets from nano-powder

DEFF Research Database (Denmark)

Mortensen, Anna; Stingaciu, Marian; Christensen, Mogens

2015-01-01

direction giving a higher net magnetization. One challenge is to optimize the pressing conditions in order to maximize the remanence and thus the energy product. In present work the SrFe12O19 powder was made in an autoclave and was analysed by X-ray diffraction and Rietveld Refinement to determine particle...... size. The powder was pressed using Spark Plasma Syntering (SPS) system at different conditions in order to investigate how the pressing conditions influence the magnetic properties. It was found, that pressing at 950oC leads to a much better alignment than pellets pressed at room temperature....... Furthermore, ball milling seems to decrease the degree of alignment and thereby the magnetic remanence which leads to a lower energy product. The magnetization was characterized using Vibrating Sample Magnetometer. By applying an external magnetic field before pressing, the alignment is heightened...

Azimuthal anisotropies and initial-state fluctuations from SPS to LHC energies

CERN Document Server

Milosevic, Jovan

2016-01-01

The $v_{3}$ coefficient, obtained using the PbAu data from the CERES detector at the top SPS energy, is presented. The $v_{2}$ is measured over a $p_{T}$ range up to 100 GeV/c in PbPb collisions collected with the CMS detector. The $v_{2}\\{2\\}$ of charged and strange particles emitted in pp collisions shows a mass ordering effect. The $v_{2}\\{4\\}$ and $v_{2}\\{6\\}$ are comparable to the $v_{2}\\{2\\}$, and thus supports the collective nature of the long-range correlations in high-multiplicity pp collisions at 13~TeV. Principle Component Analysis (PCA) of two-particle harmonics ($V_{n\\Delta}$) is studied in PbPb and high-multiplicity pPb collisions at the LHC. The factorization breaking of the $V_{n\\Delta}$ can be attributed to the effect of initial-state fluctuations (ISF). Using a PCA, the $V_{n\\Delta}$ are characterized through the leading and sub-leading modes. The leading modes are essentially equivalent to the $v_{n}\\{2\\}$. The sub-leading modes represent the largest sources of factorization breaking.

Assessment of thermal loads in the CERN SPS crab cavities cryomodule1

Science.gov (United States)

Carra, F.; Apeland, J.; Calaga, R.; Capatina, O.; Capelli, T.; Verdú-Andrés, S.; Zanoni, C.

2017-07-01

As a part of the HL-LHC upgrade, a cryomodule is designed to host two crab cavities for a first test with protons in the SPS machine. The evaluation of the cryomodule heat loads is essential to dimension the cryogenic infrastructure of the system. The current design features two cryogenic circuits. The first circuit adopts superfluid helium at 2 K to maintain the cavities in the superconducting state. The second circuit, based on helium gas at a temperature between 50 K and 70 K, is connected to the thermal screen, also serving as heat intercept for all the interfaces between the cold mass and the external environment. An overview of the heat loads to both circuits, and the combined numerical and analytical estimations, is presented. The heat load of each element is detailed for the static and dynamic scenarios, with considerations on the design choices for the thermal optimization of the most critical components.

Beam Scraping in the SPS for LHC Injection Efficiency and Robustness Studies

CERN Document Server

Letnes, Paul/LPA; Myrheim, Jan

2008-01-01

The Large Hadron Collider (LHC) at CERN will be the world's most powerful accelerator when it is commissioned in fall 2008. Operation of the LHC will require injection of very high intensity beams. Fast transverse beam scrapers have been installed in the Super Proton Synchrotron (SPS) injector to detect and, if necessary, remove transverse beam tails. This will help to both diagnose and prevent beam quenches in the LHC. Scraping of a high intensity beam at top energy can potentially damage the scraper jaws. This has been studied with Monte Carlo simulations to find energy deposition and limits for hardware damage. Loss maps from scraping have been generated both with machine studies and tracking simulations. Time dependent Beam Loss Monitor (BLM) measurements have shown several interesting details about the beam. An analytical model of time dependent losses is compared with beam measurements and demonstrates that beam scraping can be used to estimate the beam size. Energy deposition simulations also give the ...

The new generation of PowerPC VMEbus front end computers for the CERN SPS and LEP accelerators control system

OpenAIRE

Van den Eynden, M

1995-01-01

The CERN SPS and LEP PowerPC project is aimed at introducing a new generation of PowerPC VMEbus processor modules running the LynxOS real-time operating system. This new generation of front end computers using the state-of-the-art microprocessor technology will first replace the obsolete Xenix PC based systems (about 140 installations) successfully used since 1988 to control the LEP accelerator. The major issues addressed in the scope of this large scale project are the technical specificatio...

Compilation and assessment of microwave bioeffects. Final report. A selective review of the literature on biological effects of microwaves in relation to the Satellite Power System (SPS)

Energy Technology Data Exchange (ETDEWEB)

Justesen, D.R.; Ragan, H.A.; Rogers, L.E.; Guy, A.W.; Hjeresen, D.L.; Hinds, W.T.; Phillips, R.D.

1978-05-01

One of many alternate sources of electrical energy that are being considered by the Department of Energy is a microwave-mediated Satellite Power System (SPS). Once inserted into geosynchronous orbit at an altitude of more than 40,000 kilometers, a satellite would collect then convert the sun's energy to 2450-MHz microwaves, which would be beamed to the Earth's surface, where a rectifying antenna (rectenna) would convert the microwaves to electrical current suitable for industrial and domestic use. The expanse of each rectenna (about 10 by 13 kilometers), the power density of the continuous-wave microwave beam (approx. 23 mW/cm/sup 2/ at center, with fall off to 1 mW/cm/sup 2/ or less at the periphery of the rectenna), and the possibility that 20 or more satellite systems will eventually be operating, creates two sets of interrelated problems for biological/ecological assessment. These are 1) the effects of microwave fields of higher intensity on airborne biota (including human beings in aircraft) that may traffic the area above the rectenna and 2) the effects of virtually perpetual fields of much lower intensity on all forms of life at and beyond the rectennae's zone of exclusion. In this review, the scientific literature is examined, not only for biological effects that are pertinent to assessment of SPS, but for hiatuses of knowledge that will have to be filled before SPS can be vouched for operational safety.

Equipment and detectors calibration behind shielding of CERN high-energy particle accelerator SPS: June 2007

International Nuclear Information System (INIS)

Spurny, Frantisek; Ploc, Ondrej

2008-02-01

High energy stray radiation fields have been realised since 1993 at CERN also in the frame of CEC-CERN collaboration on the project: 'Detection and the Dosimetry of Neutrons and Charged Particles at Aviation Altitudes in the Earth's Atmosphere'. They are formed at the H6 beam of the north experimental area of the SPS facility. Two shielding configurations have been built, with the top concrete, resp. top iron shielding. Many intercalibration experiments have been realised since the beginning. After an interruption due to technical problems, two other campaigns have been realised during 2006 year, another one during the June 2007. This report describes analyses and discusses the most of results obtained during the last, 2007 run.. (author)

Increasing Al-Tolerance of Sugarcane Using Ethyl Methane Sulphonate and In Vitro Selection in the Low pH Media

Directory of Open Access Journals (Sweden)

Ragapadmi Purnamaningsih

2016-01-01

Full Text Available Increased production of sugarcane in Indonesia can be done with extensification sugarcane plantations which largely dominated by acidic upland red-yellow podzolic soil. High aluminium (Al content and low pH of the soil can inhibit plant growth and development. Tolerant sugarcane in acid soil is the most efficient way, but the adaptive variety is still limited. In vitro culture technique can increase genetic variability to assemble new varieties through somaclonal variation combined with mutation using ethyl methane sulphonate (EMS. The new characters was directed by in vitro selection using AlCl3.6H2O with pH = 4 as a component of selection for resistance to high aluminium. VMC 7616 and PS 862 varieties were used as materials. Mutation induced using EMS at concentrations of 0.1%, 0.3%, and 0.5% for 30, 60 and 120 minutes. Plantlets mutant obtained through callus formation, immersion callus in EMS, in vitro selection, and regeneration of callus. Result of study showed that the long immersion in the EMS solution caused greater damage to the cells, as indicated by the change in callus colour. Callus immersion time in EMS gave greater influence to regeneration compared to concentration of EMS. PS 862 had higher Al tolerance than VMC 7616. Rooting of shoot induced using indole-3-butyric acid (IBA 3 mg/L.

Digital Signal Processing Applications and Implementation for Accelerators Digital Notch Filter with Programmable Delay and Betatron Phase Adjustment for the PS, SPS and LHC Transverse Dampers

CERN Document Server

Rossi, V

2002-01-01

In the framework of the LHC project and the modifications of the SPS as its injector, I present the concept of global digital signal processing applied to a particle accelerator, using Field Programmable Gate Array (FPGA) technology. The approach of global digital synthesis implements in numerical form the architecture of a system, from the start up of a project and the very beginning of the signal flow. It takes into account both the known parameters and the future evolution, whenever possible. Due to the increased performance requirements of today's projects, the CAE design methodology becomes more and more necessary to handle successfully the added complexity and speed of modern electronic circuits. Simulation is performed both for behavioural analysis, to ensure conformity to functional requirements, and for time signal analysis (speed requirements). The digital notch filter with programmable delay for the SPS Transverse Damper is now fully operational with fixed target and LHC-type beams circulating in t...

Status and plans of the ion program of NA61 at the CERN SPS

CERN Document Server

Grebieszkow, Katarzyna

2012-01-01

The NA61/SHINE at the CERN SPS is a new experiment to study hadron production in h+h, h+A and A+A interactions. The main goal of the NA61 ion program is to explore the phase diagram (T - mu_B) of strongly interacting matter. In particular, we plan to study the properties of the onset of deconfinement and to search for the signatures of the critical point. A two-dimensional scan of the phase diagram will be performed by varying the energy (13A-158A GeV) and system size (p+p, Be+Be, Ar+Ca, Xe+La) of collisions. This paper summarizes the status and plans of the NA61/SHINE ion program. In particular the detector upgrades, data taking schedule and the first results on spectra and correlations are discussed.

Evaluation Of Yield And Chemical Properties Of Some Faba Bean (Vicia FABA L.) Mutants Induced By GAMMA Radiation And Ethyl Methane Sulphonate

International Nuclear Information System (INIS)

Sallam, E.M.; Nasr, E.H.; Attia, Z.M.; Shawki, H.A.

2013-01-01

This investigation aims to study the effect of physical and chemical mutagens on the yield and chemical properties as well as amino acids composition of defatted faba bean (Vicia faba L.) seeds meal as a control (Giza 2) compared with mutants produced by gamma radiation and ethyl methane sulphonate (EMS). Also, the functional properties of these samples were determined. The results indicated high differences between mutation for seed yield and its components than the untreated samples. In addition, radiation mutation of faba bean seeds showed slight increase in protein content as the main constituent of faba bean seeds as well as total oil percentages in some mutant of these seeds in return of decreasing in total carbohydrate. Furthermore, radiation mutation had detectable effects on the total amino acids contents of faba bean seeds meal which had a higher percentages on essential amino acids (EAA) and non-essential amino acids (NEAA) and mutant 3 was the highest values of EAA and NEAA as compared to the control. On the other hand, radiation mutation improved the protein functional properties of some mutant of faba bean meal flour than the other mutant samples as compared to local commercial variety

The synthesis of corncobs (zea mays) active charcoal and water hyacinth (eichornia crassipes) adsorbent to adsorb Pb(II) with it’s analysis using solid-phase spectrophotometry (sps)

Science.gov (United States)

Saputro, S.; Masykuri, M.; Mahardiani, L.; Kurniastuti, D.

2018-03-01

This research aim to examine the effect of the combination between corncobs and water hyacinth to adsorb lead (II), the most effective combination have determined by compared the ratio of corncobs adsorbent and water hyacinth to the increasing adsorption of the Pb(II), prove the effectiveness of the solid-phase spectrophotometry (sps) to determine the levels of Pb(II) as the result of the corncobs active charcoal adsorption and water hyacinth in the level of µg/L. The research method used is experimental method. The data collecting technique is carried out by several stages, which are carbonization using muffle furnace at a temperature of 350°C for 1.5 hours, activation of the corncobs charcoal and water hyacinth using HCl 1M and HCl 5M activator, contacting the adsorbent of corncobs active charcoal and water hyacinth with liquid waste simulation of Pb(II) using variation of corncobns and water hyacinth, 1:0; 0:1; 1:1; 2:1; 1:2, analysis of Pb(II) using an sps, characterization of corncobs active charcoal adsorbent and water hyacinth using FTIR. Research results show that the combined effect of activated charcoal corncobs and water hyacinth can increase the ability of the adsorbent to absorb Pb(II), the optimum adsorbent mass ratio of 1:1 with the absorption level of 90.33%, SPS is an effective method to analyze the decreasing level of Pb(II) as the adsorbtion result of the corncobs active charcoal and water hyacinth in the level of µg/L, with the limit of detection (LOD) of 0.06 µg/L.

Multifractal characteristics of multiparticle production in heavy-ion collisions at SPS energies

Science.gov (United States)

Khan, Shaista; Ahmad, Shakeel

Entropy, dimensions and other multifractal characteristics of multiplicity distributions of relativistic charged hadrons produced in ion-ion collisions at SPS energies are investigated. The analysis of the experimental data is carried out in terms of phase space bin-size dependence of multiplicity distributions following the Takagi’s approach. Yet another method is also followed to study the multifractality which, is not related to the bin-width and (or) the detector resolution, rather involves multiplicity distribution of charged particles in full phase space in terms of information entropy and its generalization, Rényi’s order-q information entropy. The findings reveal the presence of multifractal structure — a remarkable property of the fluctuations. Nearly constant values of multifractal specific heat “c” estimated by the two different methods of analysis followed indicate that the parameter “c” may be used as a universal characteristic of the particle production in high energy collisions. The results obtained from the analysis of the experimental data agree well with the predictions of Monte Carlo model AMPT.

UA9 Results from Crystal Collimation Tests in the SPS & Future Strategy

CERN Document Server

Scandale, W

2013-01-01

The UA9 Collaboration, with support by EuCARD-AccNet, is investigating how bent crystals, used as primary collimators, could assist and improve the collimation process in modern hadron colliders like the LHC. From 2009 onwards the UA9 Collaboration has successfully tested silicon crystals at the SPS, performing measurements of the associated collimation efficiency by means of various methods and detectors. This report presents the main UA9 results, obtained with protons and Pb ions at 120 GeV/c and 270 GeV/c per charge from 2009 to 2012, which indicate that crystal assisted collimation is well mastered and understood. Specifically, reduced loss rates were demonstrated close to the crystal, as well as in a downstream off-momentum region, and, indeed, all around the ring. In addition, the importance of the crystal miscut angle was elucidated and a first industrial goniometer compliant with LHC specifications has become available. At the end of the report, the near-term plan for LHC crystal collimation is descri...

NA61/SHINE facility at the CERN SPS: beams and detector system

CERN Document Server

Abgrall, N.; Aduszkiewicz, A.; Ali, Y.; Anticic, T.; Antoniou, N.; Baatar, B.; Bay, F.; Blondel, A.; Blumer, J.; Bogomilov, M.; Bogusz, M.; Bravar, A.; Brzychczyk, J.; Bunyatov, S.A.; Christakoglou, P.; Czopowicz, T.; Davis, N.; Debieux, S.; Dembinski, H.; Diakonos, F.; Di Luise, S.; Dominik, W.; Drozhzhova, T.; Dumarchez, J.; Dynowski, K.; Engel, R.; Efthymiopoulos, I.; Ereditato, A.; Fabich, A.; Feofilov, G.A.; Fodor, Z.; Fulop, A.; Gazdzicki, M.; Golubeva, M.; Grebieszkow, K.; Grzeszczuk, A.; Guber, F.; Haesler, A.; Hasegawa, T.; Hierholzer, M.; Idczak, R.; Igolkin, S.; Ivashkin, A.; Jokovic, D.; Kadija, K.; Kapoyannis, A.; Kaptur, E.; Kielczewska, D.; Kirejczyk, M.; Kisiel, J.; Kiss, T.; Kleinfelder, S.; Kobayashi, T.; Kolesnikov, V.I.; Kolev, D.; Kondratiev, V.P.; Korzenev, A.; Koversarski, P.; Kowalski, S.; Krasnoperov, A.; Kurepin, A.; Larsen, D.; Laszlo, A.; Lyubushkin, V.V.; Maćkowiak-Pawlowska, M.; Majka, Z.; Maksiak, B.; Malakhov, A.I.; Maletic, D.; Manglunki, D.; Manic, D.; Marchionni, A.; Marcinek, A.; Marin, V.; Marton, K.; Mathes, H.J; Matulewicz, T.; Matveev, V.; Melkumov, G.L.; Messina, M.; Mrówczyński, St.; Murphy, S.; Nakadaira, T.; Nirkko, M.; Nishikawa, K.; Palczewski, T.; Palla, G.; Panagiotou, A.D.; Paul, T.; Peryt, W.; Petukhov, O.; Pistillo, C.; Planeta, R.; Pluta, J.; Popov, B.A.; Posiadala, M.; Puławski, S.; Puzovic, J.; Rauch, W.; Ravonel, M.; Redij, A.; Renfordt, R.; Richter-Was, E.; Robert, A.; Röhrich, D.; Rondio, E.; Rossi, B.; Roth, M.; Rubbia, A.; Rustamov, A.; Rybczyński, M.; Sadovsky, A.; Sakashita, K.; Savic, M.; Schmidt, K.; Sekiguchi, T.; Seyboth, P.; Sgalaberna, D.; Shibata, M.; Sipos, R.; Skrzypczak, E.; Słodkowski, M.; Sosin, Z.; Staszel, P.; Stefanek, G.; Stepaniak, J.; Stroebele, H.; Susa, T.; Szuba, M.; Tada, M.; Tereshchenko, V.; Tolyhi, T.; Tsenov, R.; Turko, L.; Ulrich, R.; Unger, M.; Vassiliou, M.; Veberic, D.; Vechernin, V.V.; Vesztergombi, G.; Vinogradov, L.; Wilczek, A.; Włodarczyk, Z.; Wojtaszek-Szwarz, A.; Wyszyński, O.; Zambelli, L.; Zipper, W.

2014-01-01

NA61/SHINE (SPS Heavy Ion and Neutrino Experiment) is a multi-purpose experimental facility to study hadron production in hadron-proton, hadron-nucleus and nucleus-nucleus collisions at the CERN Super Proton Synchrotron. It recorded the first physics data with hadron beams in 2009 and with ion beams (secondary 7Be beams) in 2011. NA61/SHINE has greatly profited from the long development of the CERN proton and ion sources and the accelerator chain as well as the H2 beamline of the CERN North Area. The latter has recently been modified to also serve as a fragment separator as needed to produce the Be beams for NA61/SHINE. Numerous components of the NA61/SHINE set-up were inherited from its predecessors, in particular, the last one, the NA49 experiment. Important new detectors and upgrades of the legacy equipment were introduced by the NA61/SHINE Collaboration. This paper describes the state of the NA61/SHINE facility - the beams and the detector system - before the CERN Long Shutdown I, which started in March ...

Determination of the Removal Efficiency of Linear Alkyl Benzene Sulphonate Acids (LAS in Fixed Bed Aeration Tank and Conventional Activated Sludge

Directory of Open Access Journals (Sweden)

Asghar Ebrahimi

2011-03-01

Full Text Available Linear Alkyl Benzene Sulphonate Acids (LAS are one of the anionic surfactants that are produced and used in large quantities in different countries and find their way into the natural environment through sewer systems. These compounds may potentially cause environmental hazards in such surface waters as rivers. It is, therefore, necessary to remove as much of these compounds as possible by biological processes in wastewater treatment plants. For this purpose, four parallel biological reactors were constructed that used the conventional activated sludge and aeration tanks with fixed bed on the bench scale in order to evaluate the removal efficiency of LAS. The reactors were operated under conditions similar to domestic wastewater treatment plants. Parameters of interest were measured according to standard methods and ANOVA and T-test were used for the statistical analysis of the data. The results showed that aeration tanks with fixed beds yielded higher values of LAS and COD removal and air consumption compared to the conventional activated sludge system. It was shown that the two systems studied achieved LAS removal efficiencies of 96% and 94% for an influent LAS concentration of 5 mg/L. Further, it was found that the effluents from both systems satisfied water quality standards for discharge into surface waters (

Characterization of pore-expanded amino-functionalized mesoporous silicas directly synthesized with dimethyldecylamine and its application for decolorization of sulphonated azo dyes

International Nuclear Information System (INIS)

Yang Hong; Feng Qiyan

2010-01-01

With dimethyldecylamine (DMDA) as the expander, a new kind of pore-expanded amino-functionalized mesoporous silicas (PEAFMS) was directly synthesized under mild alkali condition. The characteristics of PEAFMS sample demonstrated that the presence of DMDA markedly augmented the average pore diameter (19.04 nm) and strongly enhanced its decolorization ability. Subsequently, acid mordant dark yellow GG (YGG) and reactive red violet X-2R (RVX) were chosen to assess its adsorption capacity for sulphonated azo dyes. The effect of initial pH was investigated and the decolorization mechanism was illuminated. Three isotherms were conducted and the goodness of fit increased as the following order: Freundlich < Langmuir < Redlich-Peterson. The maximum adsorption capacities of YGG and RVX onto PEAFMS were 1.967 and 0.957 mmol/g, respectively. Adsorption kinetic processes were better predicted by the pseudo-second-order rate equation than the pseudo-first-order one. Adsorption thermodynamic results suggested that the adsorption behavior of both dyes onto PEAFMS was spontaneous with the chemical nature. In addition, the regeneration of PEAFMS was proved to be feasible using NaOH as the strippant. After five cycles, PEAFMS still possessed a favorable adsorption capacity for dyes. It is safely concluded that PEAFMS could be a potential adsorbent for the dye removal from wastewater.

Determination of Pb2+ metal ion level in liquid waste from adsorption process by combination adsorbent of rice husk and water hyacinth charcoal using solid-phase spectrophotometry (sps)

Science.gov (United States)

Saputro, S.; Masykuri, M.; Mahardiani, L.; Hidayah, AN

2018-03-01

This research are to find out the influence of adsorbent composition between rice husk and water hyacinth in decreasing of Pb2+ ion in simulation liquid waste; the optimumcomposition of combination adsorbent of rice husk and water hyacinth charcoal on Pb2+ ion adsorption; and theeffectivenessof SPS as a method to determine the decreasing level of Pb2+ ion in simulation liquid waste by combination adsorbent of rice husk and water hyacinth charcoal in µg/L level. Rice husk and water hyacinth carbonization using muffle furnace at 350°C for 1 hour. Rice husk charcoal activation in a 2 N NaOH solution and water hyacinth charcoal activated in a 5 M HCl solution. Contacting the combination adsorbent of rice husk and water hyacinth charcoal with a Pb2+ solution with variation of mass composition, 1:0 ; 0:1 ; 1:1 ; 1:2 and 2:1. Analysis of the Pb2+ ion level using SPS method. Characterization of rice husk and water hyacinth charcoal using the FTIR. The results showed that the combination adsorbent composition of rice husk and water hyacinth charcoal have an impact on decreasing Pb2+ ion level. The optimum composition of combination adsorbent of rice husk and water hyacinth charcoal on the adsorption Pb2+ ion is 1:2. SPS is an effective method to determine the decreasing Pb2+ ion in simulation liquid waste from the adsorption process by combination adsorbent of rice husk and water hyacinth in µg/L, with Limit of Detection (LOD) was 0,06 µg/L.

Multimedia fate modeling of perfluorooctanoic acid (PFOA) and perfluorooctane sulphonate (PFOS) in the shallow lake Chaohu, China.

Science.gov (United States)

Kong, Xiangzhen; Liu, Wenxiu; He, Wei; Xu, Fuliu; Koelmans, Albert A; Mooij, Wolf M

2018-06-01

Freshwater shallow lake ecosystems provide valuable ecological services to human beings. However, these systems are subject to severe contamination from anthropogenic sources. Per- and polyfluoroalkyl substances (PFASs), including perfluorooctanoic acid (PFOA) and perfluorooctane sulphonate (PFOS), are among the contaminants that have received substantial attention, primarily due to abundant applications, environment persistence, and potential threats to ecological and human health. Understanding the environmental behavior of these contaminants in shallow freshwater lake environments using a modeling approach is therefore critical. Here, we characterize the fate, transport and transformation of both PFOA and PFOS in the fifth largest freshwater lake in China (Chaohu) during a two-year period (2013-2015) using a fugacity-based multimedia fate model. A reasonable agreement between the measured and modeled concentrations in various compartments confirms the model's reliability. The model successfully quantifies the environmental processes and identifies the major sources and input pathways of PFOA and PFOS to the Chaohu water body. Sensitivity analysis reveals the critical role of nonlinear Freundlich sorption, which contributes to a variable fraction of the model true uncertainty in different compartments (8.1%-93.6%). Through additional model scenario analyses, we further elucidate the importance of nonlinear Freundlich sorption that is essential for the reliable model performance. We also reveal the distinct composition of emission sources for the two contaminants, as the major sources are indirect soil volatilization and direct release from human activities for PFOA and PFOS, respectively. The present study is expected to provide implications for local management of PFASs pollution in Lake Chaohu and to contribute to developing a general model framework for the evaluation of PFASs in shallow lakes. Copyright © 2018 Elsevier Ltd. All rights reserved.

Transverse Characteristics of Hadron Production in Elementary and Nuclear Collisions at the CERN SPS Energies

CERN Document Server

AUTHOR|(CDS)2076476; Bialkowska, H

2004-01-01

A comprehensive study of transverse phenomena at CERN-SPS energies has been performed using data collected by the NA49 experiment. Results on p, p, pi+ and pi- production in elementary hadronic interactions (p + p, pi+ +p and pi- + p) as well as in nuclear collisions (centrality-defined p + Pb, C + C, Si + Si And Pb + Pb) are presented. The dependence of transverse momentum spectra, and in particular the - xF correlations, on particle species, collision energy, size and structure of the colliding objects has been investigated. Particle composition, in terms of the nuclear modification factors RpA (pT) for different xF regions – and particle ratios, has been also studied. The whole set of experimental data puts strong constraints on theoretical models aiming at the description of hadron production in the studied reactions.

A new spark detection system for the electrostatic septa of the SPS North (experimental) Area

CERN Multimedia

Barlow, R A; Borburgh, J; Carlier, E; Chanavat, C; Pinget, B

2013-01-01

Electrostatic septa (ZS) are used in the extraction of the particle beams from the CERN SPS to the North Area experimental zone. These septa employ high electric fields, generated from a 300 kV power supply, and are particularly prone to internal sparking around the cathode structure. This sparking degrades the electric field quality, consequently affecting the extracted beam, vacuum and equipment performance. To mitigate these effects, a Spark Detection System (SDS) has been realised, which is based on an industrial SIEMENS S7-400 programmable logic controller and deported Boolean processors modules interfaced through a PROFINET fieldbus. The SDS interlock logic uses a moving average spark rate count to determine if the ZS performance is acceptable. Below a certain spark rate it is probable that the ZS septa tank vacuum can recover, thus avoiding transition into a\

Event-by-event fluctuations of the mean transverse momentum $M_{p_{T}}$ at SPS energies

CERN Document Server

Appelshäuser, Harald

2004-01-01

The study of event-by-event fluctuations has been proposed as a tool to investigate the properties of hot and dense nuclear matter created in nuclear collisions. Significant fluctuations of the mean transverse momentum beyond purely statistical ones may signal the passage of the system through the QCD phase boundary or close to the critical point. Fluctuations of M/sub PT/ provide valuable information about the dynamical evolution of A A collisions. In this contribution, recent measurements by the CERES experiment at the CERN-SPS are discussed. The analysis comprises a centrality dependent study of M/sub PT/ fluctuations near mid-rapidity in Pb-Au collisions at 40, 80, and 158 A GeV/c. The non-statistical (dynamical) contribution to M/sub PT/ fluctuations has been evaluated in terms of the fluctuation measure Sigma /sub PT/.

SPS Fabrication of Tungsten-Rhenium Alloys in Support of NTR Fuels Development

International Nuclear Information System (INIS)

Webb, Jonathan A.; Charit, Indrajit; Sparks, Cory; Butt, Darryl P.; Frary, Megan; Carroll, Mark

2011-01-01

Tungsten metal slugs were fabricated via Spark Plasma Sintering (SPS) of powdered metals at temperatures ranging from 1575 K to 1975 K and hold times of 5 minutes to 30 minutes, using powders with an average diameter of 7.8 ?m. Sintered tungsten specimens were found to have relative densities ranging from 83 % to 94 % of the theoretical density for tungsten. Consolidated specimens were also tested for their Vickers Hardness Number (VHN), which was fitted as a function of relative density; the fully consolidated VHN was extrapolated to be 381.45 kg/mm2. Concurrently, tungsten and rhenium powders with average respective diameters of 0.5 ?m and 13.3 ?m were pre-processed either by High-Energy-Ball-Milling (HEBM) or by homogeneous mixing to yield W-25at.%Re mixtures. The powder batches were sintered at temperatures of 1975 K and 2175 K for hold times ranging from 0 minutes to 60 minutes yielding relative densities ranging from 94% to 97%. The combination of HEBM and sintering showed a significant decrease in the inter-metallic phases compared to that of the homogenous mixing and sintering.

High power semiconductor switches in the 12 kV, 50 kA pulse generator of the SPS beam dump kicker system

CERN Document Server

Bonthond, J; Faure, P; Vossenberg, Eugène B

2001-01-01

Horizontal deflection of the beam in the dump kicker system of the CERN SPS accelerator is obtained with a series of fast pulsed magnets. The high current pulses of 50 kA per magnet are generated with capacitor discharge type generators which, combined with a resistive free-wheel diode circuit, deliver a critically damped half-sine current with a rise-time of 25 ms. Each generator consists of two 25 kA units, connected in parallel to a magnet via a low inductance transmission line.

Geodesy and metrology at CERN a source of economy for the SPS programme

International Nuclear Information System (INIS)

Gervaise, J.

1976-01-01

This report gives a broad description of the major options adopted at the start of the project in order to meet the three challenges imposed on the geodesists engaged in survey work for the CERN 400 GeV proton synchrotron (SPS). The methods and means used are dealt with in a general manner. In the conclusion a critical study is made of the results obtained. From a different aspect, a description of the Survey Group's responsibilities highlights the extent of the savings that can be made by a well-trained group carrying out high-precision measurements. The physical dimensions of the project and the complexity of the work involved in building a second-generation accelerator demand high standards of precision since these condition the proper operation of the machine. Only by making extensive preliminary studies and precise survey work above and below ground-level over a number of years, was it possible to ensure that the final geodetic and metrological measurements would be completed at high speed and low cost. (Auth.)

Two-particle correlations in p+p and Pb+Pb collisions at SPS energies

CERN Document Server

AUTHOR|(CDS)2081214

In this thesis two-particle correlations in pseudorapidity and azimuthal angle in p+p collisions at beam momenta: 20, 31, 40, 80, and 158 GeV/c are presented. Data were recorded in the NA61/SHINE experiment at the CERN Super Proton Synchrotron (SPS). The results are compared to the EPOS and the UrQMD models as well as to the results from various experiments at the Relativistic Heavy-Ion Collider (RHIC) and the Large Hadron Collider (LHC). Dedicated comparison analysis was done also on NA49 data of Pb+Pb collisions. The inclusive results in p+p show correlation structures connected with resonance decays, Bose-Einstein statistics, momentum conservation, and strings fragmentation. No structures connected with hard processes were observed even at 158 GeV/c beam momentum. The EPOS model reproduces data fine except of Bose-Einstein enhancement; the UrQMD model shows many disagreements with data. The results provide an insight into forgotten realm of soft physics where jet peaks do not cast shadows onto two-particle...

Tests of Bubble Damage Detectors in a Heavy Ion Beam from the SPS

CERN Multimedia

2002-01-01

This experiment is designed to investigate the properties of a bubble damage polymer (BDP) using ion beams from the SPS. These polymers are already used commercially for making neutron and gamma-ray dosimeters. \\\\ \\\\ An attractive feature of BDP detectors is the ability to ``design'' a material to have a particular dE/dx threshold which can be used to detect such objects as monopoles and heavy ions as well as relativistic, singly charged tracks originating f particle interactions. \\\\ \\\\ The BDP detector is a polymer which holds droplets of super-heated liquid in suspension. The droplet size is typically a few microns and the droplet density is normally between 10|5 and 10|7 droplets/cm|3. The passage of a particle with a dE/dx exceeding the threshold of the material will cause the droplets with a sufficiently s parameter to change state, giving rise to bubbles. The dE/dx threshold of the BDP varies with pressure and temperature. The growth of bubbles in the bubble trail is limited by the polymer matrix and th...

AtlA Mediates Extracellular DNA Release, Which Contributes to Streptococcus mutans Biofilm Formation in an Experimental Rat Model of Infective Endocarditis.

Science.gov (United States)

Jung, Chiau-Jing; Hsu, Ron-Bin; Shun, Chia-Tung; Hsu, Chih-Chieh; Chia, Jean-San

2017-09-01

Host factors, such as platelets, have been shown to enhance biofilm formation by oral commensal streptococci, inducing infective endocarditis (IE), but how bacterial components contribute to biofilm formation in vivo is still not clear. We demonstrated previously that an isogenic mutant strain of Streptococcus mutans deficient in autolysin AtlA (Δ atlA ) showed a reduced ability to cause vegetation in a rat model of bacterial endocarditis. However, the role of AtlA in bacterial biofilm formation is unclear. In this study, confocal laser scanning microscopy analysis showed that extracellular DNA (eDNA) was embedded in S. mutans GS5 floes during biofilm formation on damaged heart valves, but an Δ atlA strain could not form bacterial aggregates. Semiquantification of eDNA by PCR with bacterial 16S rRNA primers demonstrated that the Δ atlA mutant strain produced dramatically less eDNA than the wild type. Similar results were observed with in vitro biofilm models. The addition of polyanethol sulfonate, a chemical lysis inhibitor, revealed that eDNA release mediated by bacterial cell lysis is required for biofilm initiation and maturation in the wild-type strain. Supplementation of cultures with calcium ions reduced wild-type growth but increased eDNA release and biofilm mass. The effect of calcium ions on biofilm formation was abolished in Δ atlA cultures and by the addition of polyanethol sulfonate. The VicK sensor, but not CiaH, was found to be required for the induction of eDNA release or the stimulation of biofilm formation by calcium ions. These data suggest that calcium ion-regulated AtlA maturation mediates the release of eDNA by S. mutans , which contributes to biofilm formation in infective endocarditis. Copyright © 2017 American Society for Microbiology.

Development and Optimisation of the SPS and LHC beam diagnostics based on Synchrotron Radiation monitors

CERN Document Server

AUTHOR|(CDS)2081364; Roncarolo, Federico

Measuring the beam transverse emittance is fundamental in every accelerator, in particular for colliders, where its precise determination is essential to maximize the luminosity and thus the performance of the colliding beams.
 Synchrotron Radiation (SR) is a versatile tool for non-destructive beam diagnostics, since its characteristics are closely related to those of the source beam. At CERN, being the only available diagnostics at high beam intensity and energy, SR monitors are exploited as the proton beam size monitor of the two higher energy machines, the Super Proton Synchrotron (SPS) and the Large Hadron Collider (LHC). The thesis work documented in this report focused on the design, development, characterization and optimization of these beam size monitors. Such studies were based on a comprehensive set of theoretical calculations, numerical simulations and experiments. A powerful simulation tool has been developed combining conventional softwares for SR simulation and optics design, thus allowing t...

Search for Invisible Decays of Sub-GeV Dark Photons in Missing-Energy Events at the CERN SPS.

Science.gov (United States)

Banerjee, D; Burtsev, V; Cooke, D; Crivelli, P; Depero, E; Dermenev, A V; Donskov, S V; Dubinin, F; Dusaev, R R; Emmenegger, S; Fabich, A; Frolov, V N; Gardikiotis, A; Gninenko, S N; Hösgen, M; Kachanov, V A; Karneyeu, A E; Ketzer, B; Kirpichnikov, D V; Kirsanov, M M; Kovalenko, S G; Kramarenko, V A; Kravchuk, L V; Krasnikov, N V; Kuleshov, S V; Lyubovitskij, V E; Lysan, V; Matveev, V A; Mikhailov, Yu V; Myalkovskiy, V V; Peshekhonov, V D; Peshekhonov, D V; Petuhov, O; Polyakov, V A; Radics, B; Rubbia, A; Samoylenko, V D; Tikhomirov, V O; Tlisov, D A; Toropin, A N; Trifonov, A Yu; Vasilishin, B; Vasquez Arenas, G; Ulloa, P; Zhukov, K; Zioutas, K

2017-01-06

We report on a direct search for sub-GeV dark photons (A^{'}), which might be produced in the reaction e^{-}Z→e^{-}ZA^{'} via kinetic mixing with photons by 100 GeV electrons incident on an active target in the NA64 experiment at the CERN SPS. The dark photons would decay invisibly into dark matter particles resulting in events with large missing energy. No evidence for such decays was found with 2.75×10^{9} electrons on target. We set new limits on the γ-A^{'} mixing strength and exclude the invisible A^{'} with a mass ≲100  MeV as an explanation of the muon g_{μ}-2 anomaly.

Search for invisible decays of sub-GeV dark photons in missing-energy events at the CERN SPS

CERN Document Server

Banerjee, D.

2017-01-05

We report on a direct search for sub-GeV dark photons (A') which might be produced in the reaction e^- Z \\to e^- Z A' via kinetic mixing with photons by 100 GeV electrons incident on an active target in the NA64 experiment at the CERN SPS. The A's would decay invisibly into dark matter particles resulting in events with large missing energy. No evidence for such decays was found with 2.75\\cdot 10^{9} electrons on target. We set new limits on the \\gamma-A' mixing strength and exclude the invisible A' with a mass < 100 MeV as an explanation of the muon g_\\mu-2 anomaly.

Bonding of TRIP-Steel/Al2O3-(3Y-TZP Composites and (3Y-TZP Ceramic by a Spark Plasma Sintering (SPS Apparatus

Directory of Open Access Journals (Sweden)

Aslan Miriyev

2016-07-01

Full Text Available A combination of the high damage tolerance of TRIP-steel and the extremely low thermal conductivity of partially stabilized zirconia (PSZ can provide controlled thermal-mechanical properties to sandwich-shaped composite specimens comprising these materials. Sintering the (TRIP-steel-PSZ/PSZ sandwich in a single step is very difficult due to differences in the sintering temperature and densification kinetics of the composite and the ceramic powders. In the present study, we successfully applied a two-step approach involving separate SPS consolidation of pure (3Y-TZP and composites containing 20 vol % TRIP-steel, 40 vol % Al2O3 and 40 vol % (3Y-TZP ceramic phase, and subsequent diffusion joining of both sintered components in an SPS apparatus. The microstructure and properties of the sintered and bonded specimens were characterized. No defects at the interface between the TZP and the composite after joining in the 1050–1150 °C temperature range were observed. Only limited grain growth occurred during joining, while crystallite size, hardness, shear strength and the fraction of the monoclinic phase in the TZP ceramic virtually did not change. The slight increase of the TZP layer’s fracture toughness with the joining temperature was attributed to the effect of grain size on transformation toughening.

The influence of sintering temperature on microstructure and mechanical properties of Ni-Al intermetallics fabricated by SPS

Energy Technology Data Exchange (ETDEWEB)

Thömmes, A., E-mail: thoemmes.alexander@gmail.com; Shevtsova, L. I., E-mail: edeliya2010@mail.ru; Laptev, I. S., E-mail: ilya-laptev-nstu@mail.ru; Mul, D. O., E-mail: ddariol@yandex.ru [Novosibirsk State Technical University, Novosibirsk, 630073 (Russian Federation); Mali, V. I., E-mail: vmali@mail.ru; Anisimov, A. G., E-mail: anis@hydro.nsc.ru [Lavrentyev Institute of Hydrodynamics SB RAS, Novosibirsk, 630090 (Russian Federation)

2015-10-27

In the present study PN85Yu15 was used as elemental powder to produce a sintered compound with Ni3Al as main phase. The Spark Plasma Sintering (SPS) technique is used to compact the powders. The powder was sintered in a temperature range between 1000°C and 1150°C to observe the influence of the sintering temperature on the microstructure and the mechanical properties. The microstructure was observed with optical microscope (OM), the phase composition was characterized by X-ray diffraction (XRD) technique. Density and microhardness were observed and compared the values with the results of other researchers. The compressive-, density- and microhardness tests show as clear result that with increasing the sintering temperature nearly all properties become better and also the microstructure studies show that porous places become less.

A new spark detection system for the electrostatic septa of the SPS North (experimental) Area

CERN Document Server

Barlow, R A; Borburgh, J; Carlier, E; Chanavat, C; Fowler, T; Pinget, B

2014-01-01

Electrostatic septa (ZS) are used in the extraction of the particle beams from the CERN SPS to the North Area experimental zone. These septa employ high electric fields, generated from a 300 kV power supply, and are particularly prone to internal sparking around the cathode structure. This sparking degrades the electric field quality, consequently affecting the extracted beam, vacuum and equipment performance. To mitigate these effects, a Spark Detection System (SDS) has been realised, which is based on an industrial SIEMENS S7-400 programmable logic controller and deported Boolean processor modules interfaced through a PROFINET fieldbus. The SDS interlock logic uses a moving average spark rate count to determine if the ZS performance is acceptable. Below a certain spark rate it is probable that the ZS septa tank vacuum can recover, thus avoiding transition into a state where rapid degradation would occur. Above this level an interlock is raised and the high voltage is switched off. Additionally, all spark si...

Effects of helium and deuterium irradiation on SPS sintered W–Ta composites at different temperatures

Energy Technology Data Exchange (ETDEWEB)

Mateus, R., E-mail: rmateus@ipfn.ist.utl.pt [Associação Euratom/IST, Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade Técnica de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa (Portugal); Dias, M. [ITN, Instituto Tecnológico e Nuclear, Estrada Nacional 10, 2686-953 Sacavém (Portugal); Lopes, J. [ITN, Instituto Tecnológico e Nuclear, Estrada Nacional 10, 2686-953 Sacavém (Portugal); ISEL, Instituto Superior de Engenharia de Lisboa, Rua Conselheiro Emídio Navarro, 1, 1959-007 Lisboa (Portugal); Rocha, J.; Catarino, N.; Franco, N. [ITN, Instituto Tecnológico e Nuclear, Estrada Nacional 10, 2686-953 Sacavém (Portugal); Livramento, V. [Associação Euratom/IST, Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade Técnica de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa (Portugal); LNEG, Laboratório Nacional de Energia e Geologia, Estrada do Paço do Lumiar, 1649-038 Lisboa (Portugal); and others

2013-11-15

Energetic He{sup +} and D{sup +} ions were implanted into different W–Ta composites in order to investigate their stability under helium and deuterium irradiation. The results were compared with morphological and chemical modifications arising from exposure of pure W and Ta. Special attention was given to tantalum hydride (Ta{sub 2}H) formation due to its implications for tritium inventory. Three W–Ta composites with 10 and 20 at.% Ta were prepared from elemental W powder and Ta fibre or powder through low-energy ball milling in argon atmosphere. Spark plasma sintering (SPS) was used as the consolidation process in the temperature range from 1473 to 1873 K. The results obtained from pure elemental samples and composites are similar. However, Ta{sub 2}H is easily formed in pure Ta by using a pre-implantation stage of He{sup +}, whereas in W–Ta composites the same reaction is clearly reduced, and it can be inhibited by controlling the sintering temperature.

SPS Injection and Beam Quality for LHC Heavy Ions With 150 ns Kicker Rise Time

CERN Document Server

Goddard, Brennan; Ducimetière, Laurent; Kotzian, Gerd; Uythoven, Jan; Velotti, Francesco

2016-01-01

As part of the LHC Injectors Upgrade project for LHC heavy ions, the SPS injection kicker system rise time needs reduction below its present 225 ns. One technically challenging option under consideration is the addition of fast Pulse Forming Lines in parallel to the existing Pulse Forming Networks for the 12 kicker magnets MKP-S, targeting a system field rise time of 100 ns. An alternative option is to optimise the system to approach the existing individual magnet field rise time (2-98%) of 150 ns. This would still significantly increase the number of colliding bunches in LHC while minimising the cost and effort of the system upgrade. The observed characteristics of the present system are described, compared to the expected system rise time, together with results of simulations and measurements with 175 and 150 ns injection batch spacing. The expected beam quality at injection into LHC is quantified, with the emittance growth and simulated tail population taking into account expected jitter and synchronisatio...

Benchmark of the SixTrack-Fluka Active Coupling Against the SPS Scrapers Burst Test

CERN Multimedia

Mereghetti, A; Cerutti, F

2014-01-01

The SPS scrapers are a key ingredient for the clean injection into the LHC: they cut off halo particles quite close to the beam core (e.g.~3.5 sigma) just before extraction, to minimise the risk for quenches. The improved beam parameters as envisaged by the LHC Injectors Upgrade (LIU) Project required a revision of the present system, to assess its suitability and robustness. In particular, a burst (i.e. endurance) test of the scraper blades has been carried out, with the whole bunch train being scraped at the centre (worst working conditions). In order to take into account the effect of betatron and longitudinal beam dynamics on energy deposition patterns, and nuclear and Coulomb scattering in the absorbing medium onto loss patterns, the SixTrack and Fluka codes have been coupled, profiting from the best of the refined physical models they respectively embed. The coupling envisages an active exchange of tracked particles between the two codes at each turn, and an on-line aperture check in SixTrack, in order ...

Exposure of CR39 Stacks to Oxygen and Sulphur Beams at the CERN-SPS

CERN Multimedia

2002-01-01

We plan to expose 8 stacks of CR39 sheets to oxygen and sulphur ions of 60 and 200~GeV at the CERN-SPS.\\\\ \\\\ The main purpose of the exposures is the calibration of the CR39 sheets used for a large area experimental search for magnetic monopoles at the Gran Sasso Laboratory (experiment MACRO). \\\\ \\\\ The stacks have 20~layers of CR39, each layer 13~cm~x~7~cm and 1.4~mm thick. A copper absorber is located after the first 6 layers. \\\\ \\\\ We require exposures of about 2000 tracks per cm$^2$ over the entire area of the stack with a uniform illumination. The standard beam used for the emulsion experiments is normally adequate for this purpose.\\\\ \\\\ We have performed one exposure to sulphur ions. The etched tracks have been measured automatically with the Elbeck image analyser system. We measured the incoming sulphur ions as well as the nuclear fragments produced in the copper absorber. Clean separation among the peaks due to the various fragments is obtained (there is no indication of nuclei with fractional electri...

Strangeness production in heavy ion collisions: What have we learned with the energy increase from SPS to RHIC

International Nuclear Information System (INIS)

Odyniec, Grazyna

2002-01-01

A review of strange particle production in heavy ion collisions at ultrarelativistic energies is presented. The particle yields and ratios from SPS and RHIC are discussed in view of the newest developments in understanding collision dynamics, and in view of their role in the search for a quark gluon plasma. A strangeness enhancement, most notably observed in CERN Pb-beam results, shows a remarkable two fold global enhancement with a much larger effect seen in the case of multistrange baryons. Hadronic models did fail to explain this pattern. At RHIC energy strangeness assumes a different role, since temperatures are higher and the central rapidity region almost baryon-free. An intriguing question: ''Did RHIC change the way we understand strangeness production in heavy ion collisions ?'' is discussed

Development of a novel biosensor based on a polypyrrole-dodecylbenzene sulphonate (PPy-DBS) film for the determination of amperometric cholesterol.

Science.gov (United States)

Özer, Bayram Oğuz; Çete, Servet

2017-06-01

Herein a novel amperometric biosensor based on a conducting polymer with anionic dopant modified electrode was successfully developed for detection of cholesterol. Polypyrrole is deposited on a platinum surface and the sodium dodecylbenzene sulphonate (DBS) ion-doped polypyrrole film was electrochemically prepared by scanning the electrode potential between -0.8 and +0.8 V at a scan rate of 20 mV/s. The present electrochemical biosensor was optimized in terms of working potential, number of cycles, concentrations of monomer, and anionic dopant. Cholesterol oxidase (ChOx) was physically entrapped in PPy-DBS to construct an amperometric cholesterol biosensor. Amperometric determination is based on the electrochemical detection of H 2 O 2 generated in the enzymatic reaction of cholesterol. Kinetic parameters, operational and storage stabilities, pH, and temperature dependencies were determined. Km and Imax were calculated as 0.11 μM and 0.967 nM/min, respectively. The operational stability results showed that 90.0% of the response current was retained after 30 activity assays. Morphology of electrodes was characterized by SEM and AFM. Additionally, contact angle measurements were made with 1 μL water of polymer film and enzyme electrode. As a result, the cholesterol biosensor suggested in this study is easy to prepare and is highly cost-effective. This composite (PPy-DBS) can supply a biocompatible and electrochemical microenvironment for immobilization of the enzyme, making this material a good candidate for the fabrication of highly sensitive and selective cholesterol biosensors.

Photoelectrochemical performance of DSSC with monodisperse and polydisperse ZnO SPs

Energy Technology Data Exchange (ETDEWEB)

Wahyuono, Ruri Agung, E-mail: r-agung-w@ep.its.ac.id; Risanti, Doty D., E-mail: r-agung-w@ep.its.ac.id [Department of Engineering Physics, Institut Teknologi Sepuluh Nopember (Indonesia); Shirosaki, Tomohiro; Nagaoka, Shoji [Kumamoto Industrial Research Institute (Japan); Takafuji, Makoto; Ihara, Hirotaka [Department of Applied Chemistry and Biochemistry, Kumamoto University (Japan)

2014-02-24

Zinc oxide, ZnO, is one of oxide semiconductors being used in DSSC. ZnO is promising material for having fairly higher energy band gap and much higher bulk electron mobility than that of anatase TiO{sub 2}, the most widely used semiconductor for DSSC photoelectrode. This study introduces the synthesis of ZnO by precipitation method. The synthesis involves ZnAc dihydrate and diethylene glycol (DEG) for the chemicals. Various size of ZnO spherical particles (SPs) are obtained in polydisperse and monodisperse particles. Monolayer and bilayer DSSCs are fabricated in sandwich structure and sensitized with N719 dye for 3 and 5 hours. Monolayer DSSC using monodisperse particles (422 nm) is able to generate highest conversion efficiency of 0.569% (V{sub oc} = 541.3 mV, J{sub sc} = 1.92 mA/cm{sup 2}, and fill factor of 54.78%). Bilayer DSSC, i.e. combined 422 - 185 nm ZnO layer, can optimize the photocurrent action spectra in UV regime leading to high conversion efficiency of 0.568 (V{sub oc} = 568.2 mV, J{sub sc} = 2.22 mA/cm{sup 2}, and fill factor of 47.25%). The longer sensitizing time does not always produce better conversion efficiency since it can induce the dissolution of Zn atoms and formation of Zn{sup 2+} - dye resisting the electron transport from dye to ZnO photoelectrode.

Longitudinal beam parameters and quality checks of the LHC beam in the SPS: further results and comparisons

CERN Document Server

Papotti, G; Linnecar, T; Shaposhnikova, E; Tückmantel, Joachim; CERN. Geneva. AB Department

2008-01-01

Controlled longitudinal emittance blow up is used, along with other measures, to stabilize the nominal LHC beam in the SPS. Two Machine Development studies (MDs) were carried out in 2007 to evaluate the effectiveness of different noise settings for the longitudinal blow up of the beam. The noise settings are affected by both the presence of the 800 MHz RF system and intensity effects which modify the synchrotron frequency distribution inside the bunch. The results for the first MD are reported in Note [1]. This Note reports on the results of the second MD, carried out on 2007-10-17, as well as the comparison between the two in order to analyse the differences between the two occasions. Figures of merit are used that allow rapid evaluation of the quality of the beam as for example stability and bunch length uniformity across batches.

ICARUS-NESSiE: a sensitive search for sterile neutrinos at CERN SPS

Science.gov (United States)

Guglielmi, A.

2013-10-01

A new experimental search for sterile neutrinos beyond the Standard Model at a new CERN-SPS neutrino beam aiming at measuring the electron and muon neutrino events with a Near and Far detectors (1600 and 330 m from the proton target) is presented. The project will exploit the ICARUS T600 LAr-TPC moved from LNGS to the CERN Far position and a new additional LAr-TPC detector, 1/4 of the T600, located in the Near position. Two magnetic spectrometers will be placed downstream of the two LAr-TPC detectors to greatly complement the physics capabilities. Comparing the two detectors, in absence of oscillations, all cross sections and experimental biases cancel out. Any difference of the event distributions at the two locations should be attributed to the possible existence of oscillations, presumably due to additional neutrinos with a mixing angle sin2(2θnew) and a mass squared difference Δm2new larger than the measured for the standard neutrinos. The superior quality of the LAr imaging TPC, in particular its unique electron-π0 discrimination allows for full rejection of backgrounds and offers a lossless νe detection capability. The determination of the muon charge with the spectrometers allows for the full separation of νμ from bar nuμ and therefore controlling systematics from muon mis-identification mainly at high momenta.

A facility to Search for Hidden Particles at the CERN SPS: the SHiP physics case

CERN Document Server

Alekhin, Sergey; Asaka, Takehiko; Batell, Brian; Bezrukov, Fedor; Bondarenko, Kyrylo; Boyarsky, Alexey; Choi, Ki-Young; Corral, Cristobal; Craig, Nathaniel; Curtin, David; Davidson, Sacha; de Gouvea, Andre; Dell'Oro, Stefano; deNiverville, Patrick; Bhupal Dev, P.S.; Dreiner, Herbi; Drewes, Marco; Eijima, Shintaro; Essig, Rouven; Fradette, Anthony; Garbrecht, Bjorn; Gavela, Belen; Giudice, Gian F.; Goodsell, Mark D.; Gorbunov, Dmitry; Gori, Stefania; Grojean, Christophe; Guffanti, Alberto; Hambye, Thomas; Hansen, Steen H.; Helo, Juan Carlos; Hernandez, Pilar; Ibarra, Alejandro; Ivashko, Artem; Izaguirre, Eder; Jaeckel, Joerg; Jeong, Yu Seon; Kahlhoefer, Felix; Kahn, Yonatan; Katz, Andrey; Kim, Choong Sun; Kovalenko, Sergey; Krnjaic, Gordan; Lyubovitskij, Valery E.; Marcocci, Simone; Mccullough, Matthew; McKeen, David; Mitselmakher, Guenakh; Moch, Sven-Olaf; Mohapatra, Rabindra N.; Morrissey, David E.; Ovchynnikov, Maksym; Paschos, Emmanuel; Pilaftsis, Apostolos; Pospelov, Maxim; Reno, Mary Hall; Ringwald, Andreas; Ritz, Adam; Roszkowski, Leszek; Rubakov, Valery; Ruchayskiy, Oleg; Schienbein, Ingo; Schmeier, Daniel; Schmidt-Hoberg, Kai; Schwaller, Pedro; Senjanovic, Goran; Seto, Osamu; Shaposhnikov, Mikhail; Shchutska, Lesya; Shelton, Jessie; Shrock, Robert; Shuve, Brian; Spannowsky, Michael; Spray, Andy; Staub, Florian; Stolarski, Daniel; Strassler, Matt; Tello, Vladimir; Tramontano, Francesco; Tripathi, Anurag; Tulin, Sean; Vissani, Francesco; Winkler, Martin W.; Zurek, Kathryn M.; CERN. Geneva. SPS and PS Experiments Committee; SPSC

2016-10-24

This paper describes the physics case for a new fixed target facility at CERN SPS. The SHiP (Search for Hidden Particles) experiment is intended to hunt for new physics in the largely unexplored domain of very weakly interacting particles with masses below the Fermi scale, inaccessible to the LHC experiments, and to study tau neutrino physics. The same proton beam setup can be used later to look for decays of tau-leptons with lepton flavour number non-conservation, $\\tau\\to 3\\mu$ and to search for weakly-interacting sub-GeV dark matter candidates. We discuss the evidence for physics beyond the Standard Model and describe interactions between new particles and four different portals - scalars, vectors, fermions or axion-like particles. We discuss motivations for different models, manifesting themselves via these interactions, and how they can be probed with the SHiP experiment and present several case studies. The prospects to search for relatively light SUSY and composite particles at SHiP are also discussed....

The Septum Magnet System of the New Fast Extraction Channel of the SPS at CERN

CERN Document Server

Balhan, B; Rizzo, A; Weterings, W

2004-01-01

In the Long Straight Section LSS4 of the Super Proton Synchrotron (SPS) at CERN, a new fast extraction system has been installed in order to extract the beam to ring 2 of the Large Hadron Collider (LHC) and the CERN Neutrino to Gran Sasso facility (CNGS). The system consists of horizontal closed orbit bumper magnets, extraction kicker magnets, enlarged aperture quadrupoles and six conventional DC electromagnetic septum magnets (MSE). A protection element (TPSG) has been placed immediately upstream of the first septum coil. The septum magnets and TPSG are mounted on a single mobile retractable support girder. The MSE septa are connected by a so-called plug-in system to a rigid water-cooled bus-bar, powered by water-cooled cables. The whole system is kept at the required vacuum pressure by ion pumps attached to separate pumping modules. In this note we present the design features and parameters of the MSE septum magnets, describe the function of the related main equipment elements, briefly report on the control...

Study of the production of {phi}, {rho}, {omega} mesons in the ultra-relativistic heavy ion collisions at the SPS of CERN; Etude de la production des mesons {phi}, {rho} et {omega} dans les collisions d'ions lourds ultra-relativistes au SPS du CERN (dans l'experience NA50)

Energy Technology Data Exchange (ETDEWEB)

Villatte, L

2001-03-28

The NA50 experiment is one of the experiment using the SPS (Super Proton Synchrotron) beam at CERN (european laboratory for particle physics). One of the common aim of the SPS experiment is to look for the existence of a new state of the nuclear matter: the quark-gluon plasma. Among the proposed signatures of the quark-gluon plasma is the enhanced production of particles containing strange quarks. In the current work, the NA50/NA38 experiment data are analysed and the relative production of the {phi} and {rho} + {omega} mesons are obtained from Pb-Pb collisions at 158 and S-U at 200 GeV per nucleon. The measured ({phi}/({rho} +{omega})){mu}{mu} ratio as a function of the transverse mass does not present any unexpected behavior, however, central collisions as compared to peripheral collisions show an increase by a factor 1.7. The {phi} and {rho}+{omega} multiplicities are extracted for the Pb-Pb collisions and show that the enhancement of the ({phi}/({rho}+{omega})){mu}{mu} ratio is due to the {phi} meson production increase. The evolution of the {phi} meson multiplicity, versus the number of participant nucleus (N{sub part}), is different from that of the multi-strange baryons. The effective temperatures are deduced from the study of the {phi} and {rho} + {omega} production cross sections with respect to the transverse mass and compared to those obtained by other experiments and other particles. An additional study is done to extract the K/{pi} ratio versus N{sub part}. (authors)

Association of two single-isomer anionic CD in NACE for the chiral and achiral separation of fenbendazole, its sulphoxide and sulphone metabolites: application to their determination after in vitro metabolism.

Science.gov (United States)

Rousseau, Anne; Gillotin, Florian; Chiap, Patrice; Crommen, Jacques; Fillet, Marianne; Servais, Anne-Catherine

2010-05-01

A NACE method was developed for the separation of fenbendazole (FBZ), a prochiral drug giving rise to chiral (oxfendazole or OFZ) and nonchiral (FBZ sulphone or FBZSO(2)) metabolites. First, the effect of the nature and the concentration of CD as well as that of the acidic BGE on the enantiomeric separation of OFZ were studied. OFZ enantiomers were completely resolved using a BGE made up of 10 mM ammonium formate and 0.5 M TFA in methanol containing 10 mM heptakis(2,3-di-O-acetyl-6-O-sulfo)-beta-CD and 10 mM heptakis(2,3-di-O-methyl-6-O-sulfo)-beta-CD. Moreover, the NACE method was found to be particularly well suited to the simultaneous determination of FBZ, OFZ enantiomers, and FBZSO(2). Thiabendazole was selected as an internal standard. The CD-NACE potential was then evaluated for in vitro metabolism studies using FBZ as a model case. The OFZ enantiomers and FBZSO(2) could be detected after incubation of FBZ in the phenobarbital-induced male rat liver microsomes systems.

'one-pot' methods for synthesis of β-aryl-β-mercaptoketones over ...

Indian Academy of Sciences (India)

... table 1 clearly showed that irradiation at 540 W for 5 min was the optimum condi- tion for the reaction. The choice of potassium carbonate. Table 3. Optimization of reaction conditions for genera- tion of 1a by use of different sulphonic acidsa. Entry. Sulphonic acid. Yield (%). 1. Amberlyst-15. 82. 2. Camphor sulphonic acid.

GEANT4 simulation diagram showing the architecture of the ATLAS test line: the detectors are positioned to receive the beam from the SPS. A muon particle which enters the magnet and crosses all detectors is shown (blue line).

CERN Multimedia

2004-01-01

GEANT4 simulation diagram showing the architecture of the ATLAS test line: the detectors are positioned to receive the beam from the SPS. A muon particle which enters the magnet and crosses all detectors is shown (blue line).

Status and Plans for the SPS to LHC Beam Transfer Lines TI 2 and TI 8

CERN Document Server

Goddard, B; Risselada, Thys

2004-01-01

Beam transfer from the CERN Super Proton Synchrotron (SPS) to the Large Hadron Collider (LHC) will be done through the two transfer lines TI 2 and TI 8, presently under construction, with a combined length of about 5.6 km. The final layout, optics design and correction scheme for these lines will be presented. The requirement of simultaneously matching their geometry and optics with that of the LHC will be treated, including the methodology for alignment of the elements along the line and a proposed solution in the final matching section. After the commissioning of the short transfer line TT40 just upstream of TI 8 in 2003, beam tests of the whole of TI 8 are scheduled for autumn 2004, with the aim to validate many of the new features and mechanisms involved in the future control and operation of these lines. The status of the installation will be described, comprising the progress with infrastructure, services and line elements. An outlook will be given for the work remaining until 2007.

Comparative results on collimation of the SPS beam of protons and Pb ions with bent crystals

CERN Document Server

Scandale, W.; Assmann, R.; Bracco, C.; Cerutti, F.; Christiansen, J.; Gilardoni, S.; Laface, E.; Losito, R.; Masi, A.; Metral, E.; Mirarchi, D.; Montesano, S.; Previtali, V.; Redaelli, S.; Valentino, G.; Schoofs, P.; Smirnov, G.; Tlustos, L.; Bagli, E.; Baricordi, S.; Dalpiaz, P.; Guidi, V.; Mazzolari, A.; Vincenzi, D.; Dabagov, S.; Murtas, F.; Carnera, A.; Della Mea, G.; De Salvador, D.; Lombardi, A.; Lytovchenko, O.; Tonezzer, M.; Cavoto, G.; Ludovici, L.; Santacesaria, R.; Valente, P.; Galluccio, F.; Afonin, A.G.; Bulgakov, M.K.; Chesnokov, Yu.A.; Maisheev, V.A.; Yazynin, I.A.; Kovalenko, A.D.; Taratin, A.M.; Uzhinskiy, V.V.; Gavrikov, Yu.A.; Ivanov, Yu.M.; Lapina, L.P.; Skorobogatov, V.V.; Ferguson, W.; Fulcher, J.; Hall, G.; Pesaresi, M.; Raymond, M.; Rose, A.; Ryan, M.; Zorba, O.; Robert-Demolaize, G.; Markiewicz, T.; Oriunno, M.; Wienands, U.

2011-01-01

New experiments on crystal assisted collimation have been carried out at the CERN SPS with stored beams of 120 Gev/c protons and Pb ions. Bent silicon crystals of 2 mm long with about 170 mu rad bend angle and a small residual torsion were used as primary collimators. In channeling conditions, the beam loss rate induced by inelastic interactions of particles with the crystal nuclei is minimal. The loss reduction was about 6 for protons and about 3 for Pb ions. Lower reduction value for Pb ions can be explained by their considerably larger ionization losses in the crystal. In one of the crystals, the measured fraction of the Pb ion beam halo deflected in channeling conditions was 74\\%, a value very close to that for protons. The intensity of the off-momentum halo leaking out from the collimation station was measured in the first high dispersion area downstream. The particle population in the shadow of the secondary collimator-absorber was considerably smaller in channeling conditions than for amorphous orienta...

Outsourcing the development of specific application software using the ESA software engineering standards the SPS software Interlock System

CERN Document Server

Denis, B

1995-01-01

CERN is considering outsourcing as a solution to the reduction of staff. To need to re-engineer the SPS Software Interlock System provided an opportunity to explore the applicability of outsourcing to our specific controls environment and the ESA PSS-05 standards were selected for the requirements specification, the development, the control and monitoring and the project management. The software produced by the contractor is now fully operational. After outlining the scope and the complexity of the project, a discussion on the ESA PSS-05 will be presented: the choice, the way these standards improve the outsourcing process, the quality induced but also the need to adapt them and their limitation in the definition of the customer-supplier relationship. The success factors and the difficulties of development under contract will also be discussed. The maintenance aspect and the impact on in-house developments will finally be addressed.

One-step inkjet printing of tungsten oxide-poly(3,4-ethylenedioxythiophene):polystyrene sulphonate hybrid film and its applications in electrochromic devices

Energy Technology Data Exchange (ETDEWEB)

Nguyen, Thi-Thuy-Nga, E-mail: thuysnga@gmail.com; Chan, Chih-Yu; He, Ju-Liang

2016-03-31

Hybrid film comprised tungsten oxide and poly (3,4-ethylenedioxythiophene):polystyrene sulphonate (WO{sub 3}–PEDOT:PSS) was developed by applying one-step inkjet printing from an office inkjet printer. The WO{sub 3} nanoparticles were synthesized from commercial crystalline WO{sub 3} powder through a wet ball-milling process, which is a simple, environmentally friendly, and cost-effective method of using water as a green solvent and low-energy milling. The WO{sub 3}–PEDOT:PSS inkjet ink was prepared by dispersing the as-milled WO{sub 3} and PEDOT:PSS in n-propanol and deionized water. The inkjet-printed WO{sub 3}–PEDOT:PSS thin films show marked improvements of cathodic electrochromism over WO{sub 3} films: the transmittance change of 20% at 550 nm (visible region) and 35% at 900 nm (infrared region) along with the response time of 5.67/0.30 s in their colored/bleached state, and the electrochromic coloration efficiency of 27.86 cm{sup 2}/C at 550 nm and 69.64 cm{sup 2}/C at 900 nm. - Highlights: • WO{sub 3} nanoparticles were synthesized by milling commercial crystalline WO{sub 3}. • Wet ball-milling was carried out by using water as a green solvent and low energy. • WO{sub 3}–PEDOT:PSS hybrid ink was simply prepared by adding n-propanol and DI water. • WO{sub 3}–PEDOT:PSS hybrid films were inkjet-printed via an office inkjet printer. • WO{sub 3}–PEDOT:PSS films show better electrochromic performances than WO{sub 3} films.

從私營標準之發展論SPS協定在全球食品安全治理之功能與限制 SPS Agreement in the Era of Private Standards Proliferation: Its Functions and Limitations in Global Food Safety Governance

Directory of Open Access Journals (Sweden)

楊培侃 Pei-Kan Yang

2014-06-01

Full Text Available 近年來，國內外發生一連串攸關食品安全之事件，並在國際貿易推波助瀾下，影響範圍更為深遠，引發各界對全球食品安全議題之關注。隨著消費者意識抬頭，消費者對產品安全的重視與日俱增，順勢興起各式各樣私營標準之蓬勃發展。雖然此等私營標準係由非政府部門之企業或團體所採行，不具備法律強制拘束之效力，但因日益普遍之結果導致市場排擠效應，使得部分中小型生產業者為能進入特定採行私營標準之市場，不得不積極使其產品取得各種私營標準的認證，進而產生影響國際間貿易障礙之疑慮。此議題對 開發中國家之影響甚於已開發國家，SPS 委員會自2005 年起便針對私營標準對國際貿易之影響開始討論。我國農產品及食品貿易頻繁，對於私營標準之相關法律議題，有研究之必要與實益。本文旨在探討私營標準之興起與SPS協定之適用關係，除探討私營標準對國際自由貿易體系所帶來的影響外，嘗試分析 SPS 協定在全球食品安全治理之角色與功能限制，並探討SPS 委員會對私營標準議題可能之處理方式。 There have been a series of domestic or international events negatively involved with food safety and public health concerns in recent years. With the liberalization of international trade, the impact has gained its serious magnitude to invoke public attention on global food safety governance. As the consumer welfare and benefits becoming the major consideration in shaping business policy, various kinds of private standards have been formulated and followed by many food retailers to satisfy consumers’ demand for a safer and healthier supply of food or agricultural products. Despite being voluntary (not legally mandatory in nature, these private standards will in fact determine certain products’ access to the market. With the dominance of these

Tertiary particle production and target optimization of the H2 beam line in the SPS North Area

CERN Document Server

AUTHOR|(CDS)2079540; Tellander, Felix; CERN. Geneva. ATS Department

2016-01-01

In this note, the tertiary particle yield from secondary targets of different materials placed at the ‘filter’ position of the H2 beam line of SPS North Area are presented. The production is studied for secondary beams of different momenta in the range of 50-250 GeV/c. More specifically, we studied six different targets: two copper cylinders with a radius of 40 mm and lengths of 100 and 300 mm, one solid tungsten cylinder with a radius of 40 mm and a length of 150 mm and three polyethylene cylinders with radius of 40 mm and lengths of 550, 700 and 1000 mm. Eight different momenta of the secondary beam (50, 60, 70, 100, 120, 150, 200 and 250 GeV/c) as well as two different physics lists (QGSP_BIC and FTFP_BERT) have been extensively studied. The purpose of this study is (a) to optimize (using the appropriate filter target) the particle production from the secondary targets as demanded by the experiments (b) investigate the proton production (with respect to the pion production) in the produced tertiary bea...

Two-pion correlation measurements in 450 GeV/c p-A collisions at the CERN SPS

International Nuclear Information System (INIS)

Miyabayashi, A.

1995-06-01

The Bose-Einstein correlation (interferometry) studies on two pions are carried out on the data obtained from the 450 GeV/C fixed target p-A experiments at the CERN SPS. THe multi-track event data sets for p-Be and p-W collisions at the NA34 (HELIOS/1) experiment and two track event data sets for p-Be, p-S and p-Pb collisions from the NA44 (Focusing spectrometer) are mainly employed in both the one and two dimensional analyses. The following investigations are made: (1) consistency in the interferometry analysis results on the p-Be data sets obtained from the two independent experiments. (2) comparison of the p-Be interactions with the p-p interactions to investigate the validity of a crude approximation of lower nucleus numbered p-A interactions to p-p interactions. (3) consistency study of different nominal spectrometer setting p-Pb data sets. (4) target dependence; relationships between geometrical target radii and parameters resulting from the correlation. (5) charged particle multiplicity density dependences of R t and R l parameters by means of a simple hydrodynamical picture of a freeze-out at a constant particle density. 89 refs

Development of Fragmented Low-Z Ion Beams for the NA61 Experiment at the CERN SPS

CERN Document Server

Efthymiopoulos, I; Bohl, T; Breuker, H; Calviani, M; Manglunki, D; Mataguez, S; Maury, S; Valderanis, C; Cornelis, K; Spanggaard, J; Cettour-Cave, S; Gazdzicki, M; Seyboth, P; Guber, F; Ivashkin, A

2011-01-01

The NA61 experiment, aims to study the properties of the onset of deconfinement at low SPS energies and to find signatures of the critical point of strongly interacting matter. A broad range in T-μB phase diagram will be covered by performing an energy (13A-158AGeV/c) and system size (p+p, Be+Be, Ar+Ca, Xe+La) scan. In a first phase, fragmented ion beams of 7Be or 11C produced as secondaries with the same momentum per nucleon when the incident primary Pb-ion beam hits a thin Be target will be used. The H2 beam line that transports the beam to the experiment acts as a double spectrometer which combined with a new thin target (degrader) where fragments loose energy proportional to the square of their charge allows the separation of the wanted A/Z fragments. Thin scintillators and TOF measurement for the low energy points are used as particle identification devices. In this paper results from the first test of the fragmented ion beam done in 2010 will be presented showing that a pure Be beam can be obtained sa...

The collagen type I segment long spacing (SLS) and fibrillar forms: Formation by ATP and sulphonated diazo dyes.

Science.gov (United States)

Harris, J Robin; Lewis, Richard J

2016-07-01

The collagen type I segment long spacing (SLS) crystallite is a well-ordered rod-like molecular aggregate, ∼300nm in length, which is produced in vitro under mildly acidic conditions (pH 2.5-3.5) in the presence of 1mM ATP. The formation of the SLS crystallite amplifies the inherent linear structural features of individual collagen heterotrimers, due to the punctate linear distribution and summation of the bulkier amino acid side chains along the length of individual collagen heterotrimers. This can be correlated structurally with the 67nm D-banded collagen fibril that is found in vivo, and formed in vitro. Although first described many years ago, the range of conditions required for ATP-induced SLS crystallite formation from acid-soluble collagen have not been explored extensively. Consequently, we have addressed biochemical parameters such as the ATP concentration, pH, speed of formation and stability so as to provide a more complete structural understanding of the SLS crystallite. Treatment of collagen type I with 1mM ATP at neutral and higher pH (6.0-9.0) also induced the formation of D-banded fibrils. Contrary to previous studies, we have shown that the polysulphonated diazo dyes Direct red (Sirius red) and Evans blue, but not Congo red and Methyl blue, can also induce the formation of SLS-like aggregates of collagen, but under markedly different ionic conditions to those employed in the presence of ATP. Specifically, pre-formed D-banded collagen fibrils, prepared in a higher than the usual physiological NaCl concentration (e.g. 500mM NaCl, 20mM Tris-HCl pH7.4 or x3 PBS), readily form SLS aggregates when treated with 0.1mM Direct red and Evans blue, but this did not occur at lower NaCl concentrations. These new data are discussed in relation to the anion (Cl(-)) and polyanion (phosphate and sulphonate) binding by the collagen heterotrimer and their likely role in collagen fibrillogenesis and SLS formation. Copyright © 2016 Elsevier Ltd. All rights reserved.

Combination of sawdust from teak wood and rice husk activated carbon as adsorbent of Pb(II) ion and its analysis using solid-phase spectrophotometry (sps)

Science.gov (United States)

Saputro, S.; Mahardiani, L.; Wulandari, D. A.

2018-03-01

This research aimed to know the usage of sawdust of teak wood and rice husk waste as Pb (II) ion adsorbents in simulated liquid waste, the combined optimum mass required adsorbent to adsorb Pb(II) ion, the sensitivity of the solid-phase spectrophotometry (sps) method in determining the decrease of Pb (II) metal ion levels in the μg/L level. This research was conducted by experimental method in laboratory. Adsorbents used in this study were charcoal of sawdust sawdust activated using 15% ZnCl2 solution and activated rice husk using 2 N NaOH solution. The adsorption processes of sawdust and rice husk with Pb(II) solution was done by variation of mass combination with a ratio of 1: 0; 0: 1; 1: 1; 1: 2; and 2: 1. Analysis of Pb(II) ion concentration using SPS and characterization of sawdust and rice husk adsorbent ads using FTIR. The results showed that activated charcoal from sawdust of teak wood and rice husks can be used as Pb (II) metal ion adsorbents with adsorption capacity of 0.86 μg/L, charcoal from sawdust of teak wood and rice husk adsorbent with a combination of optimum mass contact of sawdust and rice husk is 2:1 as much as 3 grams can adsorb 42.80 μg/L. Solid-phase spectophotometry is a sensitive method for analysis of concentration decreasing levels of Pb(II) ion, after it was absorbed by sawdust of teak wood and rice husk with high sensitivity and has the limit of detection (LOD) of 0.06 μg/L.

Identification and analysis of charged hadrons in p+p interactions from NA61/SHINE experiment at CERN SPS energies

CERN Document Server

Pulawski, Szymon

The phase-transition of strongly interacting matter is a very interesting phenom- ena, which still is not fully understood. Signi cant contribution to improving knowledge about properties of the onset of decon nement of strongly interact- ing matter might come from the NA61/SHINE experiment at CERN. The main goal of this xed-target experiment is to discover the critical point and study the properties of the onset of decon nement. This goal has been reached by the pre- cise measurement of the hadron production in proton-proton, proton-nucleus and nucleus-nucleus interactions in a wide range of system sizes and collision energies. The main goal of this thesis was to obtained two-dimensional spectra of positively and negatively charged pions, kaons and protons produced in p + p interactions at SPS energy range (20 ; 30 : 9 ; 40 ; 80 ; 158 GeV=c ). This studies are necessary for understanding of the onset of decon nement. For this purpose, identi cation and correction techniques dedicated...

Superoxide dismutase recombinant Lactobacillus fermentum ameliorates intestinal oxidative stress through inhibiting NF-κB activation in a trinitrobenzene sulphonic acid-induced colitis mouse model.

Science.gov (United States)

Hou, C L; Zhang, J; Liu, X T; Liu, H; Zeng, X F; Qiao, S Y

2014-06-01

Superoxide dismutase (SOD) can prevent and cure inflammatory bowel diseases by decreasing the amount of reactive oxygen species. Unfortunately, short half-life of SOD in the gastrointestinal tract limited its application in the intestinal tract. This study aimed to investigate the treatment effects of recombinant SOD Lactobacillus fermentum in a colitis mouse model. In this study, we expressed the sodA gene in Lact. fermentum I5007 to obtain the SOD recombinant strain. Then, we determined the therapeutic effects of this SOD recombinant strain in a trinitrobenzene sulphonic acid (TNBS)-induced colitis mouse model. We found that SOD activity in the recombinant Lact. fermentum was increased by almost eightfold compared with that in the wild type. Additionally, both the wild type and the recombinant Lact. fermentum increased the numbers of lactobacilli in the colon of mice (P < 0·05). Colitis mice treated with recombinant Lact. fermentum showed a higher survival rate and lower disease activity index (P < 0·05). Recombinant Lact. fermentum significantly decreased colonic mucosa histological scoring for infiltration of inflammatory cells, lipid peroxidation, the expression of pro-inflammatory cytokines and myeloperoxidase (P < 0·05) and inhibited NF-κB activity in colitis mice (P < 0·05). SOD recombinant Lact. fermentum significantly reduced oxidative stress and inflammation through inhibiting NF-κB activation in the TNBS-induced colitis model. This study provides insights into the anti-inflammatory effects of SOD recombinant Lact. fermentum, indicating the potential therapeutic effects in preventing and curing intestinal bowel diseases. © 2014 The Society for Applied Microbiology.

Satellite power system (SPS). Rectenna siting: availability and distribution of nominally eligible sites

Energy Technology Data Exchange (ETDEWEB)

1980-11-01

Siting of 60 ground receiving stations (rectennas) for the SPS may pose a problem due to the large area per rectenna (15,000 hectares, 38,000 acres) and numerous siting constraints. This study analyzes areas potentially eligible for rectenna sites by mapping, at a national scale, those conditions which would preclude rectenna construction. These exclusion variables which reflect restricted lands, topography, safety, national policy and electromagnetic (microwave) effects, have been computer encoded and tabulated. Subsequent analysis of the nine electric power planning regions that make up the contiguous states indicate an apparently adequate number of nominally eligible sites in all regions in comparison to projected electrical generation. Eligibility in this context means only that areas were not excluded in this national level analysis; more detailed investigation may reveal purely local constraints or smaller scale exclusions. A second major qualification relates to small isolated eligible areas. Eliminating individual eligible clusters with less than nine times the area of one rectenna eliminates much of the Eastern US; a four-to-one adjacent eligible area test poses no such problem. An independant study of the placement of 60 nominal sites in relation to projected load centers reveals that, even with modest transmission distances, the supply of eligible areas is not a key constraint, except perhaps in the Mid-Atlantic (Electric Reliability) Council Region. Even when several less critical (potential) exclusions are considered, more than 19% of the US is eligible; every region except Mid-Atlantic has at least 50 times an many eligible sites as are required.

The ATLAS inner detector semiconductor tracker (Si and GaAs strips): review of the 1995 beam tests at the CERN SPS H8 beamline

International Nuclear Information System (INIS)

Moorhead, G.F.

1995-01-01

This talk will consist of a brief review of the ATLAS Inner Detector (ID) Semiconductor Tracker (SCT) strip detector (both silicon and gallium arsenide) beam tests conducted at the ATLAS test beam facility at the CERN SPS H8 beamline. It will include a brief overview of the H8 facilities, the experimental layout of the SCT/Strip apparatus, the data acquisition system, some of the online software tools and the high precision silicon hodoscope and timing modules used. A very brief indication of some of the main varieties of detector systems tested and the measurements performed will be given. Throughout some emphasis will be placed on the contributions and-interests of members of the Melbourne group. (author)

Pure & crystallized 2D Boron Nitride sheets synthesized via a novel process coupling both PDCs and SPS methods

Science.gov (United States)

Yuan, Sheng; Linas, Sébastien; Journet, Catherine; Steyer, Philippe; Garnier, Vincent; Bonnefont, Guillaume; Brioude, Arnaud; Toury, Bérangère

2016-02-01

Within the context of emergent researches linked to graphene, it is well known that h-BN nanosheets (BNNSs), also referred as 2D BN, are considered as the best candidate for replacing SiO2 as dielectric support or capping layers for graphene. As a consequence, the development of a novel alternative source for highly crystallized h-BN crystals, suitable for a further exfoliation, is a prime scientific issue. This paper proposes a promising approach to synthesize pure and well-crystallized h-BN flakes, which can be easily exfoliated into BNNSs. This new accessible production process represents a relevant alternative source of supply in response to the increasing need of high quality BNNSs. The synthesis strategy to prepare pure h-BN is based on a unique combination of the Polymer Derived Ceramics (PDCs) route with the Spark Plasma Sintering (SPS) process. Through a multi-scale chemical and structural investigation, it is clearly shown that obtained flakes are large (up to 30 μm), defect-free and well crystallized, which are key-characteristics for a subsequent exfoliation into relevant BNNSs.

A Student Assessment Tool for Standardized Patient Simulations (SAT-SPS): Psychometric analysis.

Science.gov (United States)

Castro-Yuste, Cristina; García-Cabanillas, María José; Rodríguez-Cornejo, María Jesús; Carnicer-Fuentes, Concepción; Paloma-Castro, Olga; Moreno-Corral, Luis Javier

2018-05-01

The evaluation of the level of clinical competence acquired by the student is a complex process that must meet various requirements to ensure its quality. The psychometric analysis of the data collected by the assessment tools used is a fundamental aspect to guarantee the student's competence level. To conduct a psychometric analysis of an instrument which assesses clinical competence in nursing students at simulation stations with standardized patients in OSCE-format tests. The construct of clinical competence was operationalized as a set of observable and measurable behaviors, measured by the newly-created Student Assessment Tool for Standardized Patient Simulations (SAT-SPS), which was comprised of 27 items. The categories assigned to the items were 'incorrect or not performed' (0), 'acceptable' (1), and 'correct' (2). 499 nursing students. Data were collected by two independent observers during the assessment of the students' performance at a four-station OSCE with standardized patients. Descriptive statistics were used to summarize the variables. The difficulty levels and floor and ceiling effects were determined for each item. Reliability was analyzed using internal consistency and inter-observer reliability. The validity analysis was performed considering face validity, content and construct validity (through exploratory factor analysis), and criterion validity. Internal reliability and inter-observer reliability were higher than 0.80. The construct validity analysis suggested a three-factor model accounting for 37.1% of the variance. These three factors were named 'Nursing process', 'Communication skills', and 'Safe practice'. A significant correlation was found between the scores obtained and the students' grades in general, as well as with the grades obtained in subjects with clinical content. The assessment tool has proven to be sufficiently reliable and valid for the assessment of the clinical competence of nursing students using standardized patients

HiRadMat at CERN/SPS - A dedicated facility providing high intensity beam pulses to material samples

CERN Multimedia

Charitonidis, N; Efthymiopoulos, I

2014-01-01

HiRadMat (High Radiation to Materials), constructed in 2011, is a facility at CERN designed to provide high‐intensity pulsed beams to an irradiation area where material samples as well as accelerator component assemblies (e.g. vacuum windows, high power beam targets, collimators…) can be tested. The facility uses a 440 GeV proton beam extracted from the CERN SPS with a pulse length of up to 7.2 us, and with a maximum pulse energy of 3.4 MJ (3xE13 proton/pulse). In addition to protons, ion beams with energy of 440 GeV/charge and total pulse energy of 21 kJ can be provided. The beam parameters can be tuned to match the needs of each experiment. HiRadMat is not an irradiation facility where large doses on equipment can be accumulated. It is rather a test area designed to perform single pulse experiments to evaluate the effect of high‐intensity pulsed beams on materials or accelerator component assemblies in a controlled environment. The fa‐ cility is designed for a maximum of 1E16 protons per year, dist...

A facility to search for hidden particles at the CERN SPS: the SHiP physics case.

Science.gov (United States)

Alekhin, Sergey; Altmannshofer, Wolfgang; Asaka, Takehiko; Batell, Brian; Bezrukov, Fedor; Bondarenko, Kyrylo; Boyarsky, Alexey; Choi, Ki-Young; Corral, Cristóbal; Craig, Nathaniel; Curtin, David; Davidson, Sacha; de Gouvêa, André; Dell'Oro, Stefano; deNiverville, Patrick; Bhupal Dev, P S; Dreiner, Herbi; Drewes, Marco; Eijima, Shintaro; Essig, Rouven; Fradette, Anthony; Garbrecht, Björn; Gavela, Belen; Giudice, Gian F; Goodsell, Mark D; Gorbunov, Dmitry; Gori, Stefania; Grojean, Christophe; Guffanti, Alberto; Hambye, Thomas; Hansen, Steen H; Helo, Juan Carlos; Hernandez, Pilar; Ibarra, Alejandro; Ivashko, Artem; Izaguirre, Eder; Jaeckel, Joerg; Jeong, Yu Seon; Kahlhoefer, Felix; Kahn, Yonatan; Katz, Andrey; Kim, Choong Sun; Kovalenko, Sergey; Krnjaic, Gordan; Lyubovitskij, Valery E; Marcocci, Simone; Mccullough, Matthew; McKeen, David; Mitselmakher, Guenakh; Moch, Sven-Olaf; Mohapatra, Rabindra N; Morrissey, David E; Ovchynnikov, Maksym; Paschos, Emmanuel; Pilaftsis, Apostolos; Pospelov, Maxim; Reno, Mary Hall; Ringwald, Andreas; Ritz, Adam; Roszkowski, Leszek; Rubakov, Valery; Ruchayskiy, Oleg; Schienbein, Ingo; Schmeier, Daniel; Schmidt-Hoberg, Kai; Schwaller, Pedro; Senjanovic, Goran; Seto, Osamu; Shaposhnikov, Mikhail; Shchutska, Lesya; Shelton, Jessie; Shrock, Robert; Shuve, Brian; Spannowsky, Michael; Spray, Andy; Staub, Florian; Stolarski, Daniel; Strassler, Matt; Tello, Vladimir; Tramontano, Francesco; Tripathi, Anurag; Tulin, Sean; Vissani, Francesco; Winkler, Martin W; Zurek, Kathryn M

2016-12-01

This paper describes the physics case for a new fixed target facility at CERN SPS. The SHiP (search for hidden particles) experiment is intended to hunt for new physics in the largely unexplored domain of very weakly interacting particles with masses below the Fermi scale, inaccessible to the LHC experiments, and to study tau neutrino physics. The same proton beam setup can be used later to look for decays of tau-leptons with lepton flavour number non-conservation, [Formula: see text] and to search for weakly-interacting sub-GeV dark matter candidates. We discuss the evidence for physics beyond the standard model and describe interactions between new particles and four different portals-scalars, vectors, fermions or axion-like particles. We discuss motivations for different models, manifesting themselves via these interactions, and how they can be probed with the SHiP experiment and present several case studies. The prospects to search for relatively light SUSY and composite particles at SHiP are also discussed. We demonstrate that the SHiP experiment has a unique potential to discover new physics and can directly probe a number of solutions of beyond the standard model puzzles, such as neutrino masses, baryon asymmetry of the Universe, dark matter, and inflation.

Kaon and open charm production in central lead-lead collisions at the CERN SPS

Science.gov (United States)

van Leeuwen, Marco

2003-05-01

This thesis describes the experimental study of hadronic systems with a very high energy density and temperature. From theoretical caluclations it is expected that hadronic matter undergoes a phase transition to a deconfined state at an energy density of about 1 GeV/fm^3 or a temperature of 170 MeV. The goal of the experiments is to observe the phase transition and study the properties of the deconfined state, the Quark Gluon Plasma (QGP). Two different measurements are described and the results are discussed. The first measurement concerns the momentum distributions and total yields of kaons in lead-lead collisions at 40, 80 and 158 AGeV beam energy. Kaons are the most abundant carrier of the relatively heavy strange quarks and their production is expected to be sensitive to the energy density and the state of matter early in the collision. The second measurement is a search for the production of mesons which carry the even heavier charm quark, at the highest beam energy. The measurements have been performed with the NA49 detector at the SPS accelerator at CERN. The main detector elements are four Time Projection Chambers (TPCs), which record the trajectories of a large fraction of the final state particles to determine the charge and the momentum of each particle. In addition, the measurement of the ionisation energy loss dE/dx in the TPCs allows to identify pions, kaons and protons. Additional detectors provide a measurement of the time-of-flight in a limited acceptance. Combining the time-of-flight and dE/dx measurements greatly improves the separation of the different particle species. The kaon momentum distributions as presented in this thesis have been determined using the dE/dx measurement in the TPCs. The time-of-flight information is used for a detailed study of the peak shape of the dE/dx measurement. The resulting kaon spectra and total yields provide strong indications that interactions between produced particles or even thermalisation play an

Relación entre los mecanismos de difusión atómica y las propiedades ópticas en la sinterización por Spark Plasma Sintering (SPS de la alúmina.

Directory of Open Access Journals (Sweden)

Torrecillas, R.

2009-12-01

Full Text Available The control of the sintering parameters during spark plasma sintering (SPS of polycrystalline alumina allows modifying the contribution due to the different atomic diffusion mechanisms. Thus, changing the heating rate as a function of the sintering stage allows tailoring sintering cycles that optimize the final density of the material with a minimal grain growth. It is shown in this work how by using two heating rates, 100 and 4ºC/min, allows obtaining a polycrystalline transparent alumina with a higher real in-line transmittance than that obtained with constant heating rates sintering cycles.

El control de los parámetros de sinterización de la alúmina policristalina por spark plasma sintering (SPS permite modificar la contribución de los diferentes mecanismos de difusión atómica. Así, variar la rampa de calentamiento en función de la etapa de sinterización permite diseñar ciclos de sinterización que optimizan la densidad final del material con un mínimo crecimiento de grano. En este trabajo se demuestra cómo empleando dos velocidades, 100 y 4ºC/min, es posible obtener una alúmina policristalina con una transmitancia real en línea superior a la obtenida en ciclos con rampas constantes.

Emission of single photons, hadrons, and dileptons in $Pb+Pb$ collisions at CERN SPS and quark hadron phase transition

CERN Document Server

Srivastava, D K; Kvasnikova, I; Gale, C; Srivastava, Dinesh Kumar; Sinha, Bikash; Kvasnikova, Ioulia; Gale, Charles

2002-01-01

The production of single photons in $Pb+Pb$ collisions at the CERN SPS as measured by the WA98 experiment is analysed. A very good description of the data is obtained if a quark gluon plasma is assumed to be formed initially, which expands, cools, hadronizes, and undergoes freeze-out. A rich hadronic equation of state is used and the transverse expansion of the interacting system is taken into account. The recent estimates of photon production in quark-matter (at two loop level) along with the dominant reactions in the hadronic matter leading to photons are used. Most of the radiation of the photons is seen to arise from the quark-matter, which contributes dominantly through the mechanism of annihilation of quarks with scattering, and which in turn is possible only in a hot and dense plasma of quarks and gluons. The same treatment provides a very good description to hadronic spectra measured by several groups and the intermediate mass dileptons measured by the NA50 experiment, lending a strong support to the ...

Spectroscopic Analysis of Heterogeneous Biocatalysts for Biodiesel Production from Expired Sunflower Cooking Oil

Directory of Open Access Journals (Sweden)

Enoch Wembabazi

2015-01-01

Full Text Available The study characterized heterogeneous biocatalyst synthesized from sucrose, saw dust, and chicken egg shells using Fourier Transform Infrared (FTIR spectroscopy coupled with Attenuated Total Reflectance (ATR technique. Acidic sulphonate (–SO3H groups were more visible in the spectrum generated for carbonized and sulphonated sucrose than in carbonized and sulphonated saw dust. This was highlighted further by the significantly higher conversion percentage achieved for sulphonated sucrose (62.5% than sulphonated saw dust (46.6% during esterification of expired sunflower oil (p=0.05. The spectra for calcinated egg shells also showed that the most active form of calcium oxide was produced at calcination temperature of 1000°C. This was confirmed in the single-step transesterification reaction in which calcium oxide generated at 1000°C yielded the highest biodiesel (87.8% from expired sunflower oil. The study further demonstrated the versatility of the FTIR technique in qualitative analysis of biodiesel and regular diesel by confirming the presence of specific characteristic peaks of diagnostic importance. These findings therefore highlight the potential of FTIR-ATR as an inexpensive, fast, and accurate diagnostic means for easy identification and characterization of different materials and products.

Radiation resistance and molecular structure of poly(arylene ether sulphone)s

International Nuclear Information System (INIS)

Hill, D.J.T.; Lewis, D.A.; O'Donnell, J.H.; Pomery, P.J.; Hedrick, J.L.; McGrath, J.E.

1991-01-01

The radiation resistance of a series of aromatic polysulfones comprising alternating units of diphenyl sulfone and various aromatic diols has been investigated by measuring volatile products, soluble fractions and electron spin resonance (ESR) spectra. The yields of radicals at 77 K observed by ESR and of SO 2 at 423 K have indicated that biphenol gives enhanced resistance to γ radiation, and tetramethyl bisphenol-A decreased resistance, relative to bisphenol-A, bisphenol-S and hydroquinone. The protective effect of biphenol was confirmed by lower scission and crosslinking yields determined from the soluble fractions after high doses. (author)

Preparation, physicochemical characterisation and magnetic properties of Cu-Al layered double hydroxides with CO 32- and anionic surfactants with different alkyl chains in the interlayer

Science.gov (United States)

Trujillano, Raquel; Holgado, María Jesús; Pigazo, Fernando; Rives, Vicente

2006-03-01

Layered double hydroxides with the hydrotalcite-like structure, containing Cu(II) and Al(III) in the layers, and different alkyl sulphonates in the interlayer, have been prepared and characterised by powder X-ray diffraction, FT-IR spectroscopy, differential thermal analysis and thermogravimetric analysis. Their magnetic properties have been also studied. Except for the sample containing octadecanesulphonate in the interlayer, for which an excess of sulphonate exists, pure crystalline phases have been obtained in the other cases. Upon heating, combustion of the organic chain takes place at lower temperature than for the corresponding sodium salts. A two-dimensional antiferromagnetic behaviour is observed at 200 K in all samples containing intercalated sulphonate. The χT value is lower for the samples containing interlayer sulphonates (with layer-layer distances in the 21-31 Å range), than for a carbonate-containing analogue (basal spacing 7.51 Å).

Fabrication of Polycrystalline Transparent Co+2: MgAl2O4 by a Combination of Spark Plasma Sintering (SPS and Hot Isostatic Pressing (HIP Processes

Directory of Open Access Journals (Sweden)

Sokol Maxim

2017-01-01

Full Text Available Transparent Co2+ doped MgAl2Ob4 spinel was fabricated by SPS consolidation followed by and HIP treatment. It was established that HIP treatment significantly improved transparency of the ceramic in a wide range of wavelengths, especially, in a range, which is relevant for Q-switching. Nonlinear absorption was demonstrated and the ground and excited state absorption cross sections were estimated. The positive effect of the HIP treatment on the optical properties is related to an elimination of extremely fine porosity and to the location of Co ions at Mg2+sites in the spinel ionic structure. The experimental results indicate that the fabricated specimens can be used as a passive laser Q-switching material.

Use of 4-Amino-Naphtalene sulfonic acid as a the sole carbon, nitrogen and sulphur source, by a microbial community

International Nuclear Information System (INIS)

Velasquez-Garcia, A.; Salazar-Huerta, A.; Cobos-Casconcelos de los, D.; Santoyo-Tepole, F.; Juarez-Ramirez, C.; Ruiz-Ordaz, N.; Galindez-Mayer, J.

2009-01-01

Sulphonated aromatic amines are toxic compounds widely used in chemical synthesis of pharmaceuticals, pesticides and azo dyes. They also generated by degradation of many ozo compounds. Sulphonated amines are readily soluble in water, thus causing damage when discharged to aquatic environments. (Author)

Partially fluorinated arylene polyethers and their ternary blend membranes with PBI and H3PO4

DEFF Research Database (Denmark)

Kerres, J.; Schonberger, F.; Chromik, A

2008-01-01

A partially fluorinated polyether ionomer from polycondensation of decafluorobiphenyl with 2,2-bis(4-hydroxyphenyl)-hexafluoropropane, followed by sulphonation with H2SO4 (60% SO3), has been prepared and optimised in terms of molecular weight and sulphonation degree. The partially fluorinated ion...

Hydrodynamic Tunneling of 440 GeV SPS protons in Solid Material: Production of Warm Dense Matter at CERN HiRadMat Facility

Science.gov (United States)

Tahir, Naeem Ahmad; Blanco Sancho, Juan; Schmidt, Ruediger; Shutov, Alaxander; Burkart, Florian; Wollmann, Daniel; Piriz, Antonio Roberto

2013-10-01

Numerical simulations have shown that the range of 7 TeV LHC protons in solid matter will be significantly increased due to hydrodynamic tunneling. For example, in solid copper and solid carbon, these protons and the shower can penetrate up to 35 m and 25 m, respectively. However, their corresponding static range in the two materials is 1 m and 3 m, respectively. This will have important implications on machine protection design. In order to validate these simulation results, experiments have been performed at the CERN HiRadMat facility using the 440 GeV SPS proton beam irradiating solid copper cylindrical target. The phenomenon of hydrodynamic tunneling has been experimentally confirmed and good agreement has been found between the simulations and the experimental results. A very interesting outcome of this work is that the HiRadMat facility can be used to generate High Energy Density matter including Warm Dense Matter and strongly coupled plasmas in the laboratory.

High Intensity Beam Test of Low Z Materials for the Upgrade of SPS-to-LHC Transfer Line Collimators and LHC Injection Absorbers

CERN Document Server

Maciariello, Fausto; Butcher, Mark; Calviani, Marco; Folch, Ramon; Kain, Verena; Karagiannis, Konstantinos; Lamas Garcia, Inigo; Lechner, Anton; Nuiry, Francois-Xavier; Steele, Genevieve; Uythoven, Jan

2016-01-01

In the framework of the LHC Injector Upgrade (LIU) and High-Luminosity LHC (HL-LHC) project, the collimators in the SPS-to LHC transfer lines will undergo important modifications. The changes to these collimators will allow them to cope with beam brightness and intensity levels much increased with respect to their original design parameters: nominal and ultimate LHC. The necessity for replacement of the current materials will need to be confirmed by a test in the High Radiation to Materials (HRM) facility at CERN. This test will involve low Z materials (such as Graphite and 3-D Carbon/Carbon composite), and will recreate the worst case scenario those materials could see when directly impacted by High luminosity LHC (HL-LHC) or Batch Compression Merging and Splitting (BCMS) beams. Thermo-structural simulations used for the material studies and research, the experiment preparation phase, the experiment itself, pre irradiation analysis (including ultrasound and metrology tests on the target materials), the resul...

A search for neutral, heavy particles decaying to a neutriNO1and a single photon at the SPS wide-band neutrino beam

CERN Document Server

Steele, D M

1996-01-01

A search is performed for single, isolated photons from X 0 decay, where X 0 represents either a neutrino excited state or an unknown, neutral, massive particle produced in a rare pi+ decay along the neutrino beam line as hypothesized by the KARMEN Collaboration[1] as a possible solution to their anomalous time spectra for pi+ -> u+ + vu. The analysis is performed using data from the NOMAD (WA96) experiment in the wide-band vu beam using the SPS accelerator situated at the European Center for Nuclear Research near Geneva, Switzerland. Out of a flux of vu resulting from 6.13 x 10*18 protons on target, seven events pass all cuts. The relative abundance of these events is entirely consistent with those expected from neutrino interactions in the detector. Upper limits are set at 90% condence level for the production rate of this particle as a function of its lifetime.

[Combination drug therapy in leprosy].

Science.gov (United States)

Terencio de las Aguas, J

1983-01-01

The importance of polichemotherapy in multibacilar leprosy (LL and LD) in patients without any previous therapy as in those diagnosticated and under monotherapy most of all in the resistance patients is presented. Sulphones, clofazimine and rifampicine are selected as first rate drugs and protionamide-etionamide as second rate drugs. The therapy plans with the association of two and three drugs and the convenience of continuing indefinitely with at least one of the drugs are presented insisting on the advantages of the clofazimine-sulphones and rifampicine-sulphones associations. The necessity of immunotherapy for recover of celular immunity against the bacilus, is the only form of preventing relapses and drug resistance.

Study of infrastructure considerations for microwave energy ground receiving stations. Satellite Power System (SPS) offshore rectenna siting study in western Europe. An executive summary. Final report

Energy Technology Data Exchange (ETDEWEB)

Bresters, A.R.

1980-11-01

The feasibility of offshore rectenna sites in the North Sea based on a reference SPS concept of 5 GW was investigated. Site criteria include a 20 km wide safety zone between the site and the shore, a 300 km limit to centers of power consumption, and a water depth of 30 m. Artificial islands, polders, atolls and exposed gravity or jacket structures were considered. Only the island and polder concept permit antenna installation without modifications to the reference design. The polder concept was selected, costing half that of the artificial island (160 km sq). Construction material requirements are given for the dikes. Total construction time is 8.5 years. Costs range between 4.7 and 5.4 billion in 1980 dollars, or $0.02 per kw hr over 30 years. (ESA)

Beam-Loss Induced Pressure Rise of LHC Collimator Materials Irradiated with 158 GeV/u $In^{49+}$ Ions at the CERN SPS

CERN Document Server

Mahner, Edgar; Hansen, Jan; Page, Eric; Vincke, Helmut H

2004-01-01

During heavy ion operation, large pressure rises, up to a few orders of magnitude, were observed at CERN, GSI, and BNL. The dynamic pressure rises were triggered by lost beam ions that impacted onto the vacuum chamber walls and desorbed about 1044 to 107 molecules per ion. The deterioration of the dynamic vacuum conditions can enhance charge-exchange beam losses and can lead to beam instabilities or even to beam abortion triggered by vacuum interlocks. Consequently, a dedicated measure-ment of heavy-ion induced molecular desorption in the GeV/u energy range is important for LHC ion operation. In 2003, a desorption experiment was installed at the SPS to measure the beam-loss induced pressure rise of potential LHC collimator materials. Samples of bare graphite, sputter coated (Cu, TiZrV) graphite, and 316 LN stainless steel, were irradiated under grazing angle with 158 GeV/u indium ions. After a description of the new experimental set-up, the results of the pressure rise measurements are presented, and the deri...

Role of radiolytically generated species in radiation induced polymerization of sodium p-styrene sulphonate (SSS) in aqueous solution: Steady state and pulse radiolysis study

International Nuclear Information System (INIS)

Bhardwaj, Y.K.; Mohan, H.; Sabharwal, S.; Majali, A.B.

2000-01-01

Radiation induced polymerization of sodium p-styrene sulphonate (SSS) in aqueous solution has been investigated by steady state and pulse radiolysis techniques. Effect of dose, dose rate, monomer concentration, pH and ambient conditions on polymerization was investigated. The reactions of primary radicals of water radiolysis such as OH radical, e - aq , H atom, O· - and some oxidizing radicals like N· 3 , Cl· - 2 ,Br· - 2 , and reducing specie like CO· - 2 with SSS have also been investigated. SSS reacts with OH radical with a rate constant of 5.9x10 9 dm 3 mol -1 s -1 at pH 6.3. The results indicate that ∼83% of OH radicals undergo electron transfer reaction resulting in a cation radical species while remaining ∼17% react via addition reaction. The hydrated electron reacts with SSS with a rate constant 1.3x10 10 dm 3 mol -1 s -1 to form an anion that undergoes fast protonation to form H-adduct at pH 6.3. At high pH (>10) the anion is able to transfer electron to methyl vilogen and p-nitro aceto phenone (p-NAP) where as H-adduct is unable to transfer electron. At pH ∼1 H atom reaction with SSS is diffusion controlled with a rate constant of 5x10 9 dm 3 mol -1 s -1 and results in formation of H adduct. It was seen that anion reacts with solute an order faster than cation generated radiolytically indicating anionic initiation of polymerization of SSS. Molecular weight of the polymer formed by radiation polymerization, determined by viscosity measurement, are of the order of 10 7 and higher molecular weight polymers are obtained at lower dose rates. In presence of a crosslinking agent gelation of polymer is much faster than the monomer and a polymer concentration ∼20% is most efficiently crosslinked. (author)

Production of deuterium, tritium, and $^3$He in central Pb+Pb collisions at 20A, 30A, 40A, 80A, and 158A GeV at the CERN SPS

CERN Document Server

Anticic, T.; Bartke, J.; Beck, H.; Betev, L.; Białkowska, H.; Blume, C.; Boimska, B.; Book, J.; Botje, M.; Bunčić, P.; Christakoglou, P.; Chung, P.; Chvala, O.; Cramer, J.G.; Eckardt, V.; Fodor, Z.; Foka, P.; Friese, V.; Gaździcki, M.; Grebieszkow, K.; Höhne, C.; Kadija, K.; Karev, A.; Kolesnikov, V.I.; Kowalski, M.; Kresan, D.; Laszlo, A.; Lacey, R.; van Leeuwen, M.; Maćkowiak-Pawłowska, M.; Makariev, M.; Malakhov, A.I.; Melkumov, G.L.; Mitrovski, M.; Mrówczyński, St.; Pálla, G.; Panagiotou, A.D.; Prindle, D.; Pühlhofer, F.; Renfordt, R.; Roland, C.; Roland, G.; Rustamov, A.; Rybczyński, M.; Rybicki, A.; Sandoval, A.; Schmitz, N.; Schuster, T.; Seyboth, P.; Siklér, F.; Skrzypczak, E.; Slodkowski, M.; Stefanek, G.; Stock, R.; Ströbele, H.; Susa, T.; Szuba, M.; Varga, D.; Vassiliou, M.; Veres, G.I.; Vesztergombi, G.; Vranić, D.; Włodarczyk, Z.; Wojtaszek-Szwarc, A.

2016-01-01

Production of $d$, $t$, and $^3$He nuclei in central Pb+Pb interactions was studied at five collision energies ($\\sqrt{s_{NN}}=$ 6.3, 7.6, 8.8, 12.3, and 17.3 GeV) with the NA49 detector at the CERN SPS. Transverse momentum spectra, rapidity distributions, and particle ratios were measured. Yields are compared to predictions of statistical models. Phase-space distributions of light nuclei are discussed and compared to those of protons in the context of a coalescence approach. The coalescence parameters $B_2$ and $B_3$, as well as coalescence radii for $d$ and $^3$He were determined as a function of transverse mass at all energies.

Study of application properties of novel trisazo hetero bi-functional reactive dyes based on j-acid derivatives for cotton

International Nuclear Information System (INIS)

Mokhtari, Javad; Akbarzadeh, A; Phillips, D A S; Taylor, J A

2009-01-01

Three novel trisazo hetero bi-functional reactive dyes based on J-acid derivatives were prepared using the diazonium salt of [4-(4-sulphophenylazo-)-2,5-dimethylazobenzene-2-sulphonic acid] and a hetero bi-functional coupling component, derived from 1-hydroxy-6-aminonapthalene-3-sulphonic acid (J-acid), 1-hydroxy-6- methylaminonapthalene-3-sulphonic acid (methyl J-acid), and 1-hydroxy-6-aminonaphthalene-3,5-disulphonic acid (sulpho J-acid). On balance, the dye derived from sulpho J-acid displayed the most attractive set of technical properties, building up and fixing more efficiently than those derived from J-acid and methyl J-acid. In addition, the sulpho J-acid based dye offered better migration and, therefore, level dyeing and ease of wash off. (author)

Prospects of warm dense matter research at HiRadMat facility at CERN using 440 MeV SPS proton beam

CERN Document Server

Tahir, N A; Schmidt, R; Shutov, A; Piriz, A R

2013-01-01

In this paper we present numerical simulations of heating of a solid copper cylinder by the 440 GeV proton beam delivered by the Super Proton Synchrotron (SPS) at CERN. The beam is made of 288 proton bunches while each bunch comprises of 1.15$1011 so that the total number of protons in the beam is about 1.3$1013. The bunch length is 0.5 ns while two neighboring bunches are separated by 25 ns so that the beam duration is 7.2 ms. Particle intensity distribution in the transverse direction is a Gaussian and the beam can be focused to a spot size with s 1⁄4 0.1 mme1.0 mm. In this paper we present results using two values of s, namely 0.2 mm and 0.5 mm, respectively. The target length is 1.5 m with a radius 1⁄4 5 cm and is facially irradiated by the beam. The energy deposition code FLUKA and the two-dimensional hydrodynamic code BIG2 are employed using a suitable iteration time to simulate the hydrodynamic and the thermodynamic response of the target. The primary purpose of this work was to design fixed target...

Energy dependence of identified hadron spectra and event-by-event fluctuations in p+p interactions from NA61/SHINE at the CERN SPS

CERN Document Server

Rybczynski, Maciej; Aduszkiewicz, A.; Ali, Y.; Anticic, T.; Antoniou, N.; Argyriades, J.; Baatar, B.; Blondel, A.; Blumer, J.; Bogomilov, M.; Bravar, A.; Brooks, W.; Brzychczyk, J.; Bubak, A.; Bunyatov, S.A.; Busygina, O.; Christakoglou, P.; Czopowicz, T.; Davis, N.; Debieux, S.; Dembinski, H.; Diakonos, F.; Di Luise, S.; Dominik, W.; Drozhzhova, T.; Dumarchez, J.; Dynowski, K.; Engel, R.; Ereditato, A.; Esposito, L.S.; Feofilov, G.A.; Fodor, Z.; Ferrero, A.; Fulop, A.; Gazdzicki, M.; Golubeva, M.; Grabez, B.; Grebieszkow, K.; Grzeszczuk, A.; Guber, F.; Hakobyan, H.; Hasegawa, T.; Hierholzer, M.; Idczak, R.; Igolkin, S.; Ivanov, Y.; Ivashkin, A.; Jakovic, D.; Kadija, K.; Kapoyannis, A.; Katrynska, N.; Kaptur, E.; Kielczewska, D.; Kikola, D.; Kirejczyk, M.; Kisiel, J.; Kiss, T.; Kleinfelder, S.; Kobayashi, T.; Kolesnikov, V.I.; Kolev, D.; Kondratiev, V.P.; Korzenev, A.; Kowalski, S.; Krasnoperov, A.; Kuleshov, S.; Kurepin, A.; Larsen, D.; Laszlo, A.; Lyubushkin, V.V.; Mackowiak-Pawlowska, M.; Majka, Z.; Maksiak, B.; Malakhov, A.I.; Maletic, D.; Marchionni, A.; Marcinek, A.; Marin, V.; Marton, K.; Mathes, H.J.; Matulewicz, T.; Matveev, V.; Melkumov, G.L.; Mrowczynski, St.; Murphy, S.; Nakadaira, T.; Nirkko, M.; Nishikawa, K.; Palczewski, T.; Palla, G.; Panagiotou, A.D.; Paul, T.; Pistillo, C.; Redij, A.; Peryt, W.; Petukhov, O.; Planeta, R.; Pluta, J.; Popov, B.A.; Posiadala, M.; Pulawski, S.; Puzovic, J.; Rauch, W.; Ravonel, M.; Renfordt, R.; Robert, A.; Röhrich, D.; Rondio, E.; Roth, M.; Rubbia, A.; Rustamov, A.; Rybczynski, M.; Sadovsky, A.; Sakashita, K.; Savic, M.; Sekiguchi, T.; Seyboth, P.; Shibata, M.; Sipos, M.; Skrzypczak, E.; Slodkowski, M.; Staszel, P.; Stefanek, G.; Stepaniak, J.; Stroebele, H.; Susa, T.; Szuba, M.; Tada, M.; Tereshchenko, V.; Tolyhi, T.; Tsenov, R.; Turko, L.; Ulrich, R.; Unger, M.; Vassiliou, M.; Veberic, D.; Vechernin, V.V.; Vesztergombi, G.; Vinogradov, L.; Wilczek, A.; Wlodarczyk, Z.; Wojtaszek, A.; Wyszynski, O.; Zambelli, L.; Zipper, W.

2013-01-01

NA61/SHINE at the CERN SPS is a fixed-target experiment pursuing a rich physics program including measurements for heavy ion, neutrino and cosmic ray physics. The main goal of the ion program is to explore the most interesting $T, mu_{B}$ region of the phase diagram of strongly interacting matter. We plan to study the properties of the onset of deconfinement and to search for the signatures of the critical point. The search is performed by varying collision energy (13A-158A GeV/c) and system size (p+p, Be+Be, Ar+Ca, Xe+La). Thanks to its large acceptance and excellent particle identification capability NA61/SHINE is well suited for performing high-precision particle production measurements as well as for studying event-by-event fluctuations in p+p, p+nucleus and nucleus+nucleus collisions. Preliminary results on p+p interactions at 20, 31, 40, 80 and 158 GeV/c are presented. They include inclusive spectra of pi+, pi-, K- and protons as a function of transverse momentum/mass and rapidity as well as event-by-ev...

Spectrophotometric Determination of Reboxetine through Condensation and Diazo-Coupling Reactions

Directory of Open Access Journals (Sweden)

K. Srikanth

2011-01-01

Full Text Available In the present study, two simple, sensitive and reproducible visible spectrophotometric methods were developed for the determination of reboxetine in pure form and in pharmaceutical formulations. The methods involve acid hydrolysis of reboxetine methane sulphonate (Reboxetine as methane sulphonate and the product obtained was used for the estimation. Out of the two methods developed in the laboratory, the first method involves the condensation reaction of hydrolysed reboxetine methane sulphonate with ethyl acetoacetate in sulphuric acid medium and the second method involves the diazocoupling reaction of hydrolysed reboxetine methane sulphonate with diazotized p-sulphanilic acid in alkaline medium. They have absorption maxima at 400 nm and 430 nm respectively and obey Beer’s law in the concentration ranges of 0.5 - 0.3 μgmL-1 and 1.0 - 7.5 μgmL-1 respectively. Results of analysis were validated statistically and by recovery studies. The apparent molar absorptivity values (∈max obtained are 7.549 x 104 L mol-1 cm-11 and 2.656x104 Lmol-1cm-1 respectively. Both these have correlation coefficient value of 0.9999. The proposed methods have good precision and accuracy.

Two solanesyl diphosphate synthases with different subcellular localizations and their respective physiological roles in Oryza sativa.

Science.gov (United States)

Ohara, Kazuaki; Sasaki, Kanako; Yazaki, Kazufumi

2010-06-01

Long chain prenyl diphosphates are crucial biosynthetic precursors of ubiquinone (UQ) in many organisms, ranging from bacteria to humans, as well as precursors of plastoquinone in photosynthetic organisms. The cloning and characterization of two solanesyl diphosphate synthase genes, OsSPS1 and OsSPS2, in Oryza sativa is reported here. OsSPS1 was highly expressed in root tissue whereas OsSPS2 was found to be high in both leaves and roots. Enzymatic characterization using recombinant proteins showed that both OsSPS1 and OsSPS2 could produce solanesyl diphosphates as their final product, while OsSPS1 showed stronger activity than OsSPS2. However, an important biological difference was observed between the two genes: OsSPS1 complemented the yeast coq1 disruptant, which does not form UQ, whereas OsSPS2 only very weakly complemented the growth defect of the coq1 mutant. HPLC analyses showed that both OsSPS1 and OsSPS2 yeast transformants produced UQ9 instead of UQ6, which is the native yeast UQ. According to the complementation study, the UQ9 levels in OsSPS2 transformants were much lower than that of OsSPS1. Green fluorescent protein fusion analyses showed that OsSPS1 localized to mitochondria, while OsSPS2 localized to plastids. This suggests that OsSPS1 is involved in the supply of solanesyl diphosphate for ubiquinone-9 biosynthesis in mitochondria, whereas OsSPS2 is involved in providing solanesyl diphosphate for plastoquinone-9 formation. These findings indicate that O. sativa has a different mechanism for the supply of isoprenoid precursors in UQ biosynthesis from Arabidopsis thaliana, in which SPS1 provides a prenyl moiety for UQ9 at the endoplasmic reticulum.

Development of methodology for evaluation of long-term safety aspects of organic cement paste components

International Nuclear Information System (INIS)

Andersson, M.; Holgersson, S.; Ervanne, H.

2008-12-01

molecular weighted organics will not elute from the cementitious material, but the low molecular weighted cement grinding aid will elute. Some indications of small amounts of raw materials or decomposed materials of SPs are seen leaching out from some samples. Based on the tests performed at CTH, the sorption of Europium (Eu) on rock samples decreased clearly in the presence of the polycarboxylate (PC) type SPs: EVO 26 and Glenium 51. The effect was clearly lower for poly naphthalene sulphonate (PNS) type SPs: Mighty 150 and Rheobuild 1000. For Mighty 150 the impact on sorption of Eu on crushed rock is fairly small, the effect was strongest at the highest pH (pH 10) tested. Consistent results for the effect of Mighty 150 and Glenium 51 were obtained at HU when comparing the effect of SP at 1g/L. Discrepancies were observed at high pH (pH 10), which may be attributed to different configurations of the experiments. Possible factors having an impact on the results are e.g. Eu colloid formation and consequently lower Rd and Ld values for CTH results. The presence of smaller granite particles in the rock material used for sorption tests, since no washing procedure was used, resulted in stronger Eu sorption and higher R d and L d values for HU results. Additional factors noted are e.g., filter sorption resulting in lower Eu concentrations in HU measurements and consequently higher R d and L d values for HU results. Sorption experiments with Nickel Ni(II), Eu(III) and Thorium Th(IV) on a cation exchange resin at Empa/PSI indicate that the admixtures (Glenium 51, Rheobuild 1000 and Sigunit) may form complexes in solution with the above elements. Nevertheless, no influence on the uptake of radionuclides by cement pastes was observed in systems where the ratio of admixtures to HCP (hardened cement paste) was selected according to the expected ratio in the cementitious near field of a repository. GPC, IR and NMR analyses of field samples collected from monitoring boreholes in grouted

Study on the inclusion interaction of p-sulfonated calix[n]arenes with Vitamin K3 using methylene blue as a spectral probe.

Science.gov (United States)

Lu, Qin; Gu, Jiashan; Yu, Huapeng; Liu, Chun; Wang, Lun; Zhou, Yunyou

2007-09-01

The characteristics of host-guest complexation between p-sulfonated calix[n]arene (SCnA, n = 4, 6) and Vitamin K(3) (VK(3)) were investigated by fluorescence spectrometry and absorption spectrometry using methylene blue (MB) as a probe. Interaction with MB and SCnA led to an obvious decrease in fluorescence intensity of MB, accompanying with shifts of emission peaks. Absorption peaks also showed interesting changes; however, when VK(3) was added, fluorescence intensity and absorbance recovered and a slight and slow red shift was observed. The obtained results showed that the inclusion ability of p-sulphonated calix[n]arenes towards VK(3) was the order: p-sulphonated calix[6]arene (SC6A) >p-sulphonated calix[4]arene (SC4A). Relative mechanism was proposed to explain the inclusion process.

Measurements of charged pion differential yields from the surface of the T2K replica target for incoming 31 GeV/c protons with the NA61/SHINE spectrometer at the CERN SPS

CERN Document Server

Abgrall, N.; Ajaz, M.; Ali, Y.; Andronov, E.; Anticic, T.; Antoniou, N.; Baatar, B.; Bay, F.; Blondel, A.; Blümer, J.; Bogomilov, M.; Brandin, A.; Bravar, A.; Brzychczyk, J.; Bunyatov, S.A.; Busygina, O.; Christakoglou, P.; Cirkovic, M.; Czopowicz, T.; Davis, N.; Debieux, S.; Dembinski, H.; Deveaux, M.; Diakonos, F.; Di Luise, S.; Dominik, W.; Dumarchez, J.; Dynowski, K.; Engel, R.; Ereditato, A.; Feofilov, G.A.; Fodor, Z.; Garibov, A.; Gazdzicki, M.; Golubeva, M.; Grebieszkow, K.; Grzeszczuk, A.; Guber, F.; Haesler, A.; Hasegawa, T.; Hervé, A.E.; Hierholzer, M.; Igolkin, S.; Ivashkin, A.; Johnson, S.R.; Kadija, K.; Kapoyannis, A.; Kaptur, E.; Kisiel, J.; Kobayashi, T.; Kolesnikov, V.I.; Kolev, D.; Kondratiev, V.P.; Korzenev, A.; Kowalik, K.; Kowalski, S.; Koziel, M.; Krasnoperov, A.; Kuich, M.; Kurepin, A.; Larsen, D.; László, A.; Lewicki, M.; Lyubushkin, V.V.; Mackowiak-Pawłowska, M.; Maksiak, B.; Malakhov, A.I.; Manic, D.; Marcinek, A.; Marino, A.D.; Marton, K.; Mathes, H.-J.; Matulewicz, T.; Matveev, V.; Melkumov, G.L.; Messerly, B.; Mills, G.B.; Morozov, S.; Mrówczynski, S.; Nagai, Y.; Nakadaira, T.; Naskret, M.; Nirkko, M.; Nishikawa, K.; Panagiotou, A.D.; Paolone, V.; Pavin, M.; Petukhov, O.; Pistillo, C.; Płaneta, R.; Popov, B.A.; Posiadała-Zezula, M.; Puławski, S.; Puzovic, J.; Rauch, W.; Ravonel, M.; Redij, A.; Renfordt, R.; Richter-Was, E.; Robert, A.; Röhrich, D.; Rondio, E.; Roth, M.; Rubbia, A.; Rumberger, B.T.; Rustamov, A.; Rybczynski, M.; Sadovsky, A.; Sakashita, K.; Sarnecki, R.; Schmidt, K.; Sekiguchi, T.; Selyuzhenkov, I.; Seryakov, A.; Seyboth, P.; Sgalaberna, D.; Shibata, M.; Słodkowski, M.; Staszel, P.; Stefanek, G.; Stepaniak, J.; Ströbele, H.; Šuša, T.; Szuba, M.; Tada, M.; Taranenko, A.; Tefelska, A.; Tefelski, D.; Tereshchenko, V.; Tsenov, R.; Turko, L.; Ulrich, R.; Unger, M.; Vassiliou, M.; Veberic, D.; Vechernin, V.V.; Vesztergombi, G.; Vinogradov, L.; Wilczek, A.; Włodarczyk, Z.; Wojtaszek-Szwarc, A.; Wyszynski, O.; Yarritu, K.; Zambelli, L.; Zimmerman, E.D.; Friend, M.; Galymov, V.; Hartz, M.; Hiraki, T.; Ichikawa, A.; Kubo, H.; Matsuoka, K.; Murakami, A.; Nakaya, T.; Suzuki, K.; Tzanov, M.; Yu, M.

2016-01-01

Measurements of particle emission from a replica of the T2K 90 cm-long carbon target were performed in the NA61/SHINE experiment at CERN SPS, using data collected during a high-statistics run in 2009. An efficient use of the long-target measurements for neutrino flux predictions in T2K requires dedicated reconstruction and analysis techniques. Fully-corrected differential yields of charged pions from the surface of the T2K replica target for incoming 31 GeV/c protons are presented. A possible strategy to implement these results into the T2K neutrino beam predictions is discussed and the propagation of the uncertainties of these results to the final neutrino flux is performed

Measurements of $\\pi ^{\\pm }$ , $K^{\\pm }$ , $K^0_S$ , $\\varLambda $ and proton production in proton–carbon interactions at 31 GeV/c with the NA61/SHINE spectrometer at the CERN SPS

CERN Document Server

Abgrall, N.; Ali, Y.; Andronov, E.; Anticic, T.; Antoniou, N.; Baatar, B.; Bay, F.; Blondel, A.; Blumer, J.; Bogomilov, M.; Bravar, A.; Brzychczyk, J.; Bunyatov, S.A.; Busygina, O.; Christakoglou, P.; Czopowicz, T.; Davis, N.; Debieux, S.; Dembinski, H.; Deveaux, M.; Diakonos, F.; Di Luise, S.; Dominik, W.; Drozhzhova, T.; Dumarchez, J.; Dynowski, K.; Engel, R.; Ereditato, A.; Feofilov, G.A.; Fodor, Z.; Gazdzicki, M.; Golubeva, M.; Grebieszkow, K.; Grzeszczuk, A.; Guber, F.; Haesler, A.; Hasegawa, T.; Herve, A.; Hierholzer, M.; Igolkin, S.; Ivashkin, A.; Jokovic, D.; Johnson, S.; Kadija, K.; Kapoyannis, A.; Kaptur, E.; Kielczewska, D.; Kisiel, J.; Kobayashi, T.; Kolesnikov, V.I.; Kolev, D.; Kondratiev, V.P.; Korzenev, A.; Kowalik, K.; Kowalski, S.; Koziel, M.; Krasnoperov, A.; Kuich, M.; Kurepin, A.; Larsen, D.; Laszlo, A.; Lewicki, M.; Lyubushkin, V.V.; Mackowiak-Pawlowska, M.; Majka, Z.; Maksiak, B.; Malakhov, A.I.; Manic, D.; Marcinek, A.; Marino, A.D.; Marton, K.; Mathes, H.J.; Matulewicz, T.; Matveev, V.; Melkumov, G.L.; Morozov, S.; Mrowczynski, S.; Murphy, S.; Nakadaira, T.; Naskret, M.; Nirkko, M.; Nishikawa, K.; Palczewski, T.; Panagiotou, A.D.; Pavin, M.; Petukhov, O.; Pistillo, C.; Planeta, R.; Pluta, J.; Popov, B.A.; Posiadala-Zezula, M.; Pulawski, S.; Puzovic, J.; Rauch, W.; Ravonel, M.; Redij, A.; Renfordt, R.; Richter-Was, E.; Robert, A.; Rohrich, D.; Rondio, E.; Roth, M.; Rubbia, A.; Rustamov, A.; Rybczynski, M.; Sadovsky, A.; Sakashita, K.; Schmidt, K.; Sekiguchi, T.; Seryakov, A.; Seyboth, P.; Sgalaberna, D.; Shibata, M.; Slodkowski, M.; Staszel, P.; Stefanek, G.; Stepaniak, J.; Strobele, H.; Susa, T.; Szuba, M.; Tada, M.; Tereshchenko, V.; Tsenov, R.; Turko, L.; Ulrich, R.; Unger, M.; Vassiliou, M.; Veberic, D.; Vechernin, V.V.; Vesztergombi, G.; Vinogradov, L.; Wilczek, A.; Wlodarczyk, Z.; Wojtaszek-Szwarc, A.; Wyszynski, O.; Yarritu, K.; Zambelli, L.

2016-01-01

Measurements of hadron production in p+C interactions at 31 GeV/c are performed using the NA61/ SHINE spectrometer at the CERN SPS. The analysis is based on the full set of data collected in 2009 using a graphite target with a thickness of 4% of a nuclear interaction length. Interaction and production cross sections as well as spectra of pi+/0, K+/-, p, K0S and Lambda are measured with high precision. These measurements are essential for improved calculations of the initial neutrino fluxes in the T2K long-baseline neutrino oscillation experiment in Japan. A comparison of NA61/SHINE measurements with predictions of several hadroproduction models is presented.

Activity concentration and population dose from natural occurring radionuclide (40K) due to consumption of fresh water fish

International Nuclear Information System (INIS)

Jha, M.K.; Patra, A.K.; Jaison, T.J.; Ravi, P.M.; Tripathi, R.M.

2015-01-01

The objective of this study was to measure the concentration of natural occurring radionuclide ( 40 K) in different fresh water fish collected from Moticher lake near Kakrapar, Gujarat. The three types of commonly available fresh water fish in Moticher lake are Notopterus sps, Ophiocephalus sps. and Tor sps. The 40 K activity (Bq/kg flesh wt.) was found to be in the range of 38-100 (Notopterus sps.), 33-123 (Ophiocephalus sps.) and 80-116 (Tor sps.) respectively. The ingestion dose (μSv/y) to the adult population around Kakrapar was estimated due to the consumption of fresh water fish and found to be in the range of 7.7-20.5 (Notopterus sps.), 6.8-25.0 (Ophiocephalus sps.) and 16.0-24.0 (Tor sps.) respectively. (author)

Commandant’s International Technical Series. Volume 9. International Regulations on the Prevention of Pollution from Ships Carrying Hazardous Chemicals in Bulk.

Science.gov (United States)

1985-12-01

Isopropyl alcohol 1219 Lard MEPC 22/21 ANNEX 2 Page 56 Substance UN Number Latex (carboxylated styrene/butadiene copoLymer) *1 Lignin sulphonic acid...persons required to enter cargo tanks or siop tanks for any purpose should be carefully considered. 1.7.5 Reactivity hazards The water washing of cargo...anhydrides (e.g. formic, acetic); .3 halogenated carboxylic acids (e.g. chloracetic); .4 sulpnonic acids (e.g. benzene sulphonic); .5 caustic alkalis

The effects of imagery on problem-solving ability and autobiographical memory.

Science.gov (United States)

Dennis, Ashley A; Astell, Arlene; Dritschel, Barbara

2012-12-01

Williams et al. (2006) found that increased imageability of cue words during an autobiographical memory task increased specificity of autobiographical memory (ABM) and improved subsequent social problem-solving (SPS). This study explored whether imagery during SPS improved SPS skill, perceived SPS ability, and the specificity of ABMs retrieved in the process of SPS in dysphoric students. Additionally, this study hypothesised that both memory specificity and perceived SPS ability would positively correlate with SPS skill. Dysphoric and non-dysphoric students solved hypothetical social problems on a modified version of the Means-End Problem-Solving task with a verbal or an imagery focus. Participants also completed a questionnaire about ABMs retrieved during SPS and rated their perceived effectiveness of their solutions. Contrary to Williams et al. (2006), the imagery focus did not improve SPS skill or influence perceived effectiveness. Additionally, in contrast to the hypothesis, the imagery group retrieved more overgeneral memories. Finally, ABM specificity did not correlate with SPS skill. However, dysphoric participants perceived specific memories to be significantly less helpful to SPS whereas non-dysphoric participants perceived specific memories to be helpful potentially supporting work on overgeneral ABM and functional avoidance. Copyright © 2011 Elsevier Ltd. All rights reserved.

Chemistry teachers’ understanding of science process skills in relation of science process skills assessment in chemistry learning

Science.gov (United States)

Hikmah, N.; Yamtinah, S.; Ashadi; Indriyanti, N. Y.

2018-05-01

A Science process skill (SPS) is a fundamental scientific method to achieve good knowledge. SPS can be categorized into two levels: basic and integrated. Learning SPS helps children to grow as individuals who can access knowledge and know how to acquire it. The primary outcomes of the scientific process in learning are the application of scientific processes, scientific reasoning, accurate knowledge, problem-solving, and understanding of the relationship between science, technology, society, and everyday life’s events. Teachers’ understanding of SPS is central to the application of SPS in a learning process. Following this point, this study aims to investigate the high school chemistry teachers’ understanding of SPS pertains to their assessment of SPS in chemistry learning. The understanding of SPS is measured from the conceptual and operational aspects of SPS. This research uses qualitative analysis method, and the sample consists of eight chemistry teachers selected by random sampling. A semi-structured interview procedure is used to collect the data. The result of the analysis shows that teachers’ conceptual and operational understanding of SPS is weak. It affects the accuracy and appropriateness of the teacher’s selection of SPS assessment in chemistry learning.

Evaluation of a feature extraction framework for FPGA firmware generation during a beam-test at CERN-SPS for the CBM-TRD experiment

Energy Technology Data Exchange (ETDEWEB)

Garcia Chavez, Cruz de Jesus; Munoz Castillo, Carlos Enrique; Kebschull, Udo [Infrastructure and Computer Systems in Data Processing (IRI), Goethe University, Frankfurt am Main (Germany); Collaboration: CBM-Collaboration

2016-07-01

A feature extraction framework has been developed to allow easy FPGA firmware generation for specific feature extraction algorithms in order to find and extract regions of interest within time-based signals. This framework allows the instantiation of multiple well-known feature extraction algorithms such as center of gravity, time over threshold and cluster finder, just to mention a few of them. A graphical user interface has also been built on top of the framework to provide a user-friendly way to visualize the data-flow architecture across processing stages. The FPGA platform constraints are automatically set up by the framework itself. This feature reduces the need of low-level hardware configuration knowledge that would normally be provided by the user, centering the attention in setting up the processing algorithms for the given task more than in writing hardware description code. During November 2015, a beam-test was performed at the CERN-SPS hall. The presented framework was used to generate a firmware for the SysCore3 FPGA development board used to readout two TRD detectors by means of the SPADIC 1.0 front-end chip. The framework architecture, design methodology, as well as the achieved results during the mentioned beam-test are presented.

Short communication: A reproductive tract scoring system to manage fertility in lactating dairy cows.

Science.gov (United States)

Young, C D; Schrick, F N; Pohler, K G; Saxton, A M; Di Croce, F A; Roper, D A; Wilkerson, J B; Edwards, J L

2017-07-01

We developed a reproductive tract size and position score (SPS) system as a reproductive management tool to identify lactating dairy cows with decreased fertility. This system, relying solely on transrectal palpation, considers the size (cervical and uterine) and position of the reproductive tract relative to the pelvis. Cows undergoing pre-breeding exams were identified as having reproductive tracts that were small (SPS1), medium (SPS2), or large (SPS3). Cows designated SPS1 had small and compact uterine horns that rested within the pelvic cavity; SPS2 cows had reproductive tracts that were intermediate in cervical and uterine horn diameter, with longer uterine horns resting partially outside the pelvic cavity; and SPS3 cows had reproductive tracts that were larger and rested mostly outside the pelvic cavity. Cows that were SPS1 had a higher rate of pregnancy per artificial insemination (43.3 ± 3.7%) than cows that were SPS2 (36.9 ± 3.6%) or SPS3 (27.7 ± 4.3%). The percentage of cows with an SPS2 score differed in pregnancies per artificial insemination compared with SPS3 cows. The average days in milk was similar for SPS1, SPS2, and SPS3 cows (104.3 ± 3.5, 98.4 ± 3.4, and 94.7 ± 7.7, respectively). Ultrasound measurements of the uterine horn and cervical diameter, and length measurements of the uterine horns, cervix, and vagina confirmed differences among the SPS groups derived by transrectal palpation. The ease with which transrectal palpation can be used to determine the size and position of the reproductive tract attests to the relevance and usefulness of this scoring system to identify less fertile lactating dairy cows. The ability to do so with ease provides an opportunity to make economically relevant management decisions and maximize reproductive efficiency in a given herd. Copyright © 2017 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Development and characterization of sugar palm starch and poly(lactic acid) bilayer films.

Science.gov (United States)

Sanyang, M L; Sapuan, S M; Jawaid, M; Ishak, M R; Sahari, J

2016-08-01

The development and characterization of environmentally friendly bilayer films from sugar palm starch (SPS) and poly(lactic acid) (PLA) were conducted in this study. The SPS-PLA bilayer films and their individual components were characterized for their physical, mechanical, thermal and water barrier properties. Addition of 50% PLA layer onto 50% SPS layer (SPS50-PLA50) increased the tensile strength of neat SPS film from 7.74 to 13.65MPa but reduced their elongation at break from 46.66 to 15.53%. The incorporation of PLA layer significantly reduced the water vapor permeability as well as the water uptake and solubility of bilayer films which was attributed to the hydrophobic characteristic of the PLA layer. Furthermore, scanning electron microscopy (SEM) image of SPS50-PLA50 revealed lack of strong interfacial adhesion between the SPS and PLA. Overall, the incorporation of PLA layer onto SPS films enhances the suitability of SPS based films for food packaging. Copyright © 2016 Elsevier Ltd. All rights reserved.

Magnetic and structural properties of spark plasma sintered nanocrystalline NdFeB-powders

Energy Technology Data Exchange (ETDEWEB)

Wuest, H., E-mail: holger.wuest@de.bosch.com [Robert Bosch GmbH, Postfach 10 60 50, 70049 Stuttgart (Germany); Bommer, L., E-mail: lars.bommer@de.bosch.com [Robert Bosch GmbH, Postfach 10 60 50, 70049 Stuttgart (Germany); Weissgaerber, T., E-mail: thomas.weissgaerber@ifam-dd.fraunhofer.de [Fraunhofer Institute for Manufacturing Technology and Advanced Materials (IFAM), Branch Lab Dresden, Winterbergstraße 28, 01277 Dresden (Germany); Kieback, B., E-mail: bernd.kieback@ifam-dd.fraunhofer.de [Fraunhofer Institute for Manufacturing Technology and Advanced Materials (IFAM), Branch Lab Dresden, Winterbergstraße 28, 01277 Dresden (Germany); Technische Universität Dresden, Institute for Materials Science, Helmholtzstraße 7, 01069 Dresden (Germany)

2015-10-15

Near-stoichiometric NdFeB melt-spun ribbons have been subjected to spark plasma sintering varying the process temperature T{sub SPS} and pressure p{sub SPS} between 600 and 800 °C and 50–300 MPa, respectively. Produced bulk magnets were analyzed regarding microstructure and magnetic properties. For all samples the intrinsic coercivity H{sub c,J} gradually decreases with increasing sintering temperature and pressure, while residual induction B{sub r} increases simultaneously with sample density. Densities close to the theoretical limit were achieved for p{sub SPS}≥90 MPa and T{sub SPS}≥650 °C. With increasing T{sub SPS} precipitations of Nd-rich and Fe-rich phases have been observed as a result of a decomposition of the hard magnetic Nd{sub 2}Fe{sub 14}B phase. Under optimum sintering conditions of p{sub SPS}=300 MPa and T{sub SPS}=650 °C high-density bulk magnets with H{sub c,J}=652 kA/m, B{sub r}=0.86 T and (BH){sub max}=106 kJ/m{sup 3} have been produced. - Highlights: • Consolidation close to the theoretical density for p{sub SPS}≥90 MPa and T{sub SPS}≥650 °C. • Highest (BH){sub max} of 106 kJ/m{sup 3} for p{sub SPS}=300 MPa and T{sub SPS}=650 °C with 98% theo. • H{sub c,J} gradually decreases with increasing T{sub SPS}, while B{sub r} increases simultaneously with. • With increasing T{sub SPS}, Nd- and Fe-rich precipitations are observed. • Reduction in t{sub SPS} is economic but does not increase (BH){sub max} significantly.

Selective propagation and beam splitting of surface plasmons on metallic nanodisk chains.

Science.gov (United States)

Hu, Yuhui; Zhao, Di; Wang, Zhenghan; Chen, Fei; Xiong, Xiang; Peng, Ruwen; Wang, Mu

2017-05-01

Manipulating the propagation of surface plasmons (SPs) on a nanoscale is a fundamental issue of nanophotonics. By using focused electron beam, SPs can be excited with high spatial accuracy. Here we report on the propagation of SPs on a chain of gold nanodisks with cathodoluminescence (CL) spectroscopy. Experimental evidence for the propagation of SPs excited by the focused electron beam is demonstrated. The wavelength of the transmitted SPs depends on the geometrical parameters of the nanodisk chain. Furthermore, we design and fabricate a beam splitter, which selectively transmits SPs of certain wavelengths to a specific direction. By scanning the sample surface point by point and collecting the CL spectra, we obtain the spectral mapping and identify that the chain of the smaller nanodisks can efficiently transport SPs at shorter wavelengths. This Letter provides a unique approach to manipulate in-plane propagation of SPs.

Charge carrier mobility in sulphonated and non-sulphonated Ni phthalocyanines: experiment and quantum chemical calculations

Czech Academy of Sciences Publication Activity Database

Šebera, Jakub; Nešpůrek, Stanislav; Kratochvílová, Irena; Záliš, Stanislav; Chaidogiannos, G.; Glezos, N.

2009-01-01

Roč. 72, č. 3 (2009), s. 385-395 ISSN 1434-6028 R&D Projects: GA MŠk OC 139; GA MŠk OC 137; GA AV ČR KAN401770651; GA AV ČR KAN200100801; GA ČR GA203/08/1594; GA MŠk OC 138 Institutional research plan: CEZ:AV0Z40400503; CEZ:AV0Z40500505; CEZ:AV0Z10100520 Keywords : Ni Phthalocyanines * chemical calculations * polymers Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 1.466, year: 2009

Detection rate of serrated polyps and serrated polyposis syndrome in colorectal cancer screening cohorts: a European overview.

Science.gov (United States)

IJspeert, J E G; Bevan, R; Senore, C; Kaminski, M F; Kuipers, E J; Mroz, A; Bessa, X; Cassoni, P; Hassan, C; Repici, A; Balaguer, F; Rees, C J; Dekker, E

2017-07-01

The role of serrated polyps (SPs) as colorectal cancer precursor is increasingly recognised. However, the true prevalence SPs is largely unknown. We aimed to evaluate the detection rate of SPs subtypes as well as serrated polyposis syndrome (SPS) among European screening cohorts. Prospectively collected screening cohorts of ≥1000 individuals were eligible for inclusion. Colonoscopies performed before 2009 and/or in individuals aged below 50 were excluded. Rate of SPs was assessed, categorised for histology, location and size. Age-sex-standardised number needed to screen (NNS) to detect SPs were calculated. Rate of SPS was assessed in cohorts with known colonoscopy follow-up data. Clinically relevant SPs (regarded as a separate entity) were defined as SPs ≥10 mm and/or SPs >5 mm in the proximal colon. Three faecal occult blood test (FOBT) screening cohorts and two primary colonoscopy screening cohorts (range 1.426-205.949 individuals) were included. Rate of SPs ranged between 15.1% and 27.2% (median 19.5%), of sessile serrated polyps between 2.2% and 4.8% (median 3.3%) and of clinically relevant SPs between 2.1% and 7.8% (median 4.6%). Rate of SPs was similar in FOBT-based cohorts as in colonoscopy screening cohorts. No apparent association between the rate of SP and gender or age was shown. Rate of SPS ranged from 0% to 0.5%, which increased to 0.4% to 0.8% after follow-up colonoscopy. The detection rate of SPs is variable among screening cohorts, and standards for reporting, detection and histopathological assessment should be established. The median rate, as found in this study, may contribute to define uniform minimum standards for males and females between 50 and 75 years of age. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Assessing the effects of customer innovativeness, environmental value and ecological lifestyles on residential solar power systems install intention

International Nuclear Information System (INIS)

Chen, Kee Kuo

2014-01-01

To understand the impact of environmental value, ecological lifestyle, customer innovativeness on customer intention to install solar power system (SPS) in their private houses, an empirical model was proposed. Customer innovativeness was treated as a second-order construct with two first-order dimensions, with each of the latter being measured by means of reflective indicators. Using structural equation modeling, data collected from 203 college students and faculties at a University of Taiwan were tested against the model. We found that environmental value has a positive impact on ecological lifestyle and SPS install intention. Although ecological lifestyle associates positively with SPS install intention, the effect disappears when environmental value is included in the model. The effect of customer innovativeness on SPS install intention results from the tendency of customer novelty seeking, while the impact of customer independent judgment-making on SPS install intention is insignificant. The model explained 76% of the total variations within SPS install intention. Managerial implications for promoting of SPS are considered, and suggestions for further research provided. - Highlights: • We integrate customer innovativeness into an environmental behavior model. • The impact of customer innovativeness on SPS install intention was confirmed. • The impact of novelty seeking on SPS install intention has been found. • Environmental value is the most important factor for SPS install intention. • The model explained 76% of the total variations within SPS install intention