WorldWideScience

Sample records for pollution prevention requirements

  1. 30 CFR 250.806 - Safety and pollution prevention equipment quality assurance requirements.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Safety and pollution prevention equipment... Gas Production Safety Systems § 250.806 Safety and pollution prevention equipment quality assurance... install only certified safety and pollution prevention equipment (SPPE) in wells located on the OCS. SPPE...

  2. Marine Pollution Prevention Act

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Marine Pollution Prevention Act of 2008 implements the International Convention for the Prevention of Pollution from Ships, including related Protocols (MARPOL)...

  3. Pollution prevention: A regulatory update

    International Nuclear Information System (INIS)

    Walzer, A.E.; Maynard, J.W.

    1993-01-01

    Pollution prevention is the emphasis of the 1990s environmental philosophy. This new environmental era was ushered in when President Bush signed the Pollution Prevention Act in October 1990. This law, with its accompanying philosophy, was in response to the realization that end-of-the-pipe treatment, which frequently changed the media in which a pollutant or waste was discharged, was inadequate to protect the environment and human health. Pollution prevention advocates source reduction, where material substitutions and engineering solutions are sought to reduce the volume and toxicity of waste and pollutants. This proactive approach reduces environmental impacts such as those of former waste sites which have produced environmental legacies that will cost billions of dollars and take decades to remediate. This paper describes pollution prevention philosophy and summarizes regulatory pollution prevention requirements. It describes current regulatory trends in the area of pollution prevention, including voluntary programs and enforcement actions. The Pollution Prevention Act of 1990 is described, and pollution prevention initiatives embodied in other laws, including the Clean Air Act, the Clean Water Act, the Emergency Planning and Community Right-To-Know Act, the Resource Conservation and Recovery Act, and the Toxic Substances Control Act, are discussed. A historical overview of waste minimization initiatives within the Department of Energy is given, and other pollution prevention initiatives that affect federal facilities, such as Executive Order 12780, which mandates recycling and the procurement of recycled materials, are also outlined

  4. Measuring pollution prevention

    International Nuclear Information System (INIS)

    Stephan, D.G.; Bridges, J.S.

    1992-01-01

    To assess progress in pollution prevention, estimates or measurements of the amounts of pollution actually prevented have to be made. Such estimates or measurements tell us how far we have come and, possibly, how much farther there is to go in utilizing pollution prevention as a tool for improving environmental quality. They can, theoretically, be used to assess progress on a scale ranging from the individual facility or even the individual process or activity generation wastes to scale as large as a geographical area such as a county, a state or even the United States as a whole. 3 refs

  5. Industrial pollution prevention handbook

    International Nuclear Information System (INIS)

    Freeman, H.M.

    1995-01-01

    This book presents the techniques, technologies, regulations, and strategies that define pollution prevention. The subject is addressed from many perspectives by prominent experts. In many ways pollution prevention, rather than being a specialty field itself, is actually a convergence of fields drawing upon knowledge in a wide variety of more typical fields of expertise. Individual chapters have been processed separately for inclusion in the appropriate data bases

  6. Grant Programs for Pollution Prevention

    Science.gov (United States)

    The Office of Pollution Prevention and Toxics is responsible for overseeing several grant programs for tribes and states which promote pollution prevention through source reduction and resource conservation.

  7. A comparison of the cost associated with pollution prevention measures to that required to treat polluted water resources

    CSIR Research Space (South Africa)

    Oelofse, Suzanna HH

    2012-03-01

    Full Text Available by nitrogen and particularly phosphorous (Hart, 2006). The main sources of nutrient pollution are sewage effluent and agricultural run-off. The discharge of nitrogen (as nitrates) and phosphorus (as phosphates) to inland rivers, lakes and dams causes... mg/ℓ (DWAF, 1996a). Table 2: TDS of natural water (DWAF, 1996a) Geological formations in contact with water TDS (mg/ℓ) Granite, siliceous sand and well-leached soils < 30 Precambium shield areas < 65 Palaeozoic and Mesozoic sedimentary rock...

  8. Pollution prevention program implementation plan

    International Nuclear Information System (INIS)

    Engel, J.A.

    1996-09-01

    The Pollution Prevention Program Implementation Plan (the Plan) describes the Pacific Northwest National Laboratory's (PNNL) Pollution Prevention (P2) Program. The Plan also shows how the P2 Program at PNNL will be in support of and in compliance with the Hanford Site Waste Minimization and Pollution Prevention (WMin/P2) Awareness Program Plan and the Hanford Site Guide for Preparing and Maintaining Generator Group Pollution Prevention Program Documentation. In addition, this plan describes how PNNL will demonstrate compliance with various legal and policy requirements for P2. This plan documents the strategy for implementing the PNNL P2 Program. The scope of the P2 Program includes implementing and helping to implement P2 activities at PNNL. These activities will be implemented according to the Environmental Protection Agency's (EPA) hierarchy of source reduction, recycling, treatment, and disposal. The PNNL P2 Program covers all wastes generated at the Laboratory. These include hazardous waste, low-level radioactive waste, radioactive mixed waste, radioactive liquid waste system waste, polychlorinated biphenyl waste, transuranic waste, and sanitary waste generated by activities at PNNL. Materials, resource, and energy conservation are also within the scope of the PNNL P2 Program

  9. Municipal water pollution prevention program

    International Nuclear Information System (INIS)

    1991-03-01

    EPA believes that the most effective and equitable means of assuring viability of this infrastructure is through environmentally preferred pollution prevention approaches especially through application of Municipal Water Pollution Prevention (MWPP). These approaches may enhance worker safety, improve the usability of sludge, increase the ability for local community expansion, and reduce operation and compliance costs. State-based municipal pollution prevention programs focus attention on a series of actions to prevent pollution in advance rather than taking more expensive corrective actions. MWPP encourages resource conservation to reduce water and energy use, appropriate pricing, toxicity reductions at the source, BOD reductions, recycling, proper treatment of wastes, and beneficial uses of sludge

  10. Pollution Prevention/Waste Minimization

    International Nuclear Information System (INIS)

    Fowler, Kimberly M.; Hyman, Marvin H.

    2002-01-01

    This chapter offers pollution prevention techniques for design, industrial process, maintenance, and environmental remediation activities. It provides examples of waste reduction, tools for identifying pollution prevention opportunities, and ways of calculating the payback or return on investment associated with the opportunities

  11. Pollution Prevention Program: Technology summary

    International Nuclear Information System (INIS)

    1994-02-01

    The Department of Energy (DOE) has established a national Research, Development, Demonstration, Testing, and Evaluation (RDDT ampersand E) Program for pollution prevention and waste minimization at its production plants During FY89/90 the Office of Environmental Restoration and Waste Management (EM), through the Office of Technology Development (OTD), established comprehensive, pollution prevention technical support programs to demonstrate new, environmentally-conscious technology for production processes. The RDDT ampersand E program now entails collaborative efforts across DOE. The Pollution Prevention Program is currently supporting three major activities: The DOE/US Air Force Memorandum of Understanding Program is a collaborative effort to utilize the combined resources of DOE and the Department of Defense, eliminate duplication of effort in developing technologies, and to facilitate technology solutions aimed at reducing waste through process modification, material substitution or recycling. The Waste Component Recycle, Treatment and Disposal Integrated Demonstration (WeDID) will develop recycle, treatment, and disposal processes and associated technologies for use in the dismantlement of non-nuclear weapons components, to support US arms treaties and policies. This program will focus on meeting all security and regulatory requirements (with additional benefit to the commercial electronics industry). The Environmentally Conscious Manufacturing Integrated Demonstration (ECMID) will effectively implement ECM technologies that address both the needs of the DOE Complex and US electronics industry, and encourage strong interaction between DOE and US industry. The ECMID will also develop life cycle analysis tools that will aid decisionmakers in selecting the optimum process based on the tradeoffs between cost an environmental impact

  12. Hanford Site waste minimization and pollution prevention awareness program plan

    International Nuclear Information System (INIS)

    Place, B.G.

    1998-01-01

    This plan, which is required by US Department of Energy (DOE) Order 5400. 1, provides waste minimization and pollution prevention guidance for all Hanford Site contractors. The plan is primary in a hierarchical series that includes the Hanford Site Waste Minimization and Pollution Prevention Awareness Program Plan, Prime contractor implementation plans, and the Hanford Site Guide for Preparing and Maintaining Generator Group Pollution Prevention Program Documentation (DOE-RL, 1997a) describing programs required by Resource Conservation and Recovery Act of 1976 (RCRA) 3002(b) and 3005(h) (RCRA and EPA, 1994). Items discussed include the pollution prevention policy and regulatory background, organizational structure, the major objectives and goals of Hanford Site's pollution prevention program, and an itemized description of the Hanford Site pollution prevention program. The document also includes US Department of Energy, Richland Operations Office's (RL's) statement of policy on pollution prevention as well as a listing of regulatory drivers that require a pollution prevention program

  13. 32 CFR 989.31 - Pollution prevention.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Pollution prevention. 989.31 Section 989.31... ENVIRONMENTAL IMPACT ANALYSIS PROCESS (EIAP) § 989.31 Pollution prevention. The Pollution Prevention Act of 1990..., whenever feasible. Pollution prevention approaches should be applied to all pollution-generating activities...

  14. Fiscal Year 2015 Pollution Prevention Grant Summaries

    Science.gov (United States)

    The Office of Pollution Prevention and Toxics is responsible for overseeing several grant programs for tribes and states which promote pollution prevention through source reduction and resource conservation.

  15. Fiscal Year 2014 Pollution Prevention Grant Summaries

    Science.gov (United States)

    The Office of Pollution Prevention and Toxics is responsible for overseeing several grant programs for tribes and states which promote pollution prevention through source reduction and resource conservation.

  16. 46 CFR 91.25-38 - Pollution prevention.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Pollution prevention. 91.25-38 Section 91.25-38 Shipping... CERTIFICATION Inspection for Certification § 91.25-38 Pollution prevention. At each inspection for certification... design and equipment requirements for pollution prevention in 33 CFR part 155, subpart B. [CGD 71-161R...

  17. 46 CFR 189.25-38 - Pollution prevention.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Pollution prevention. 189.25-38 Section 189.25-38... AND CERTIFICATION Inspection for Certification § 189.25-38 Pollution prevention. At each inspection... meets the vessel design and equipment requirements for pollution prevention in 33 CFR part 155, subpart...

  18. Pollution prevention and air quality

    International Nuclear Information System (INIS)

    Fuentes Hector; Tsihrintzis Vassilios

    1997-01-01

    Pollution prevention (P2) results from the combined effect of the public opinion, a new environmental value system, government regulation, but above all, the search for an economic development within the context of environmental protection. The reasons for prevention are fundamental: profit from a new economic frontier; reduced potential for civil and criminal liability; and the effective and economic protection of the environment. This paper addresses, among other relevant issues, the following topics: justification and objective of pollution prevention; strategy and methodology for its implementation; examples of successes and tools; benefits and barriers and some recommendation

  19. 30 CFR 250.300 - Pollution prevention.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Pollution prevention. 250.300 Section 250.300... OPERATIONS IN THE OUTER CONTINENTAL SHELF Pollution Prevention and Control § 250.300 Pollution prevention. (a... pollution occurs as a result of operations conducted by or on behalf of the lessee and the pollution damages...

  20. Air pollution: impact and prevention.

    Science.gov (United States)

    Sierra-Vargas, Martha Patricia; Teran, Luis M

    2012-10-01

    Air pollution is becoming a major health problem that affects millions of people worldwide. In support of this observation, the World Health Organization estimates that every year, 2.4 million people die because of the effects of air pollution on health. Mitigation strategies such as changes in diesel engine technology could result in fewer premature mortalities, as suggested by the US Environmental Protection Agency. This review: (i) discusses the impact of air pollution on respiratory disease; (ii) provides evidence that reducing air pollution may have a positive impact on the prevention of disease; and (iii) demonstrates the impact concerted polices may have on population health when governments take actions to reduce air pollution. © 2012 The Authors. Respirology © 2012 Asian Pacific Society of Respirology.

  1. 1999 Annual Report on Waste Generation and Pollution Prevention Progress as Required by DOE Order 5400.1

    International Nuclear Information System (INIS)

    SEGALL, P.

    2000-01-01

    Hanford's missions are to safely clean-up and manage the site's legacy wastes, and to develop and deploy science and technology. Through these missions Hanford will contribute to economic diversification of the region. Hanford's environmental management or clean-up mission is to protect the health and safety of the public, workers, and the environment; control hazardous materials; and utilize the assets (people, infrastructure, and site) for other missions. Hanford's science and technology mission is to develop and deploy science and technology in the service of the nation including stewardship of the Hanford Site. Pollution Prevention is a key to the success of these missions by reducing the amount of waste to be managed and identifying/implementing cost effective waste reduction projects. Hanford's original mission, the production of nuclear materials for the nation's defense programs, lasted more than 40 years, and like most manufacturing operations, Hanford's operations generated large quantities of waste and pollution. However, the by-products from Hanford operations pose unique problems like radiation hazards, vast volumes of contaminated water and soil, and many contaminated structures including reactors, chemical plants and evaporation ponds. The clean-up activity is an immense and challenging undertaking. Including characterization and decommissioning of 149 single shell storage tanks, treating 28 double shell tanks, safely disposing of over 2,100 metric tons of spent nuclear fuel stored on site, removing numerous structures, and dealing with significant solid waste, ground water, and land restoration issues

  2. Preventing pollution from plutonium processing

    International Nuclear Information System (INIS)

    Pillay, K.K.S.

    1993-01-01

    The plutonium processing facility at Los Alamos has adopted the strategic goal of becoming a facility that processes plutonium in a way that produces only environmentally benign waste streams. Pollution prevention through source reduction and environmentally sound recycling are being pursued. General approaches to waste reductions are administrative controls, modification of process technologies, and additional waste polishing. Recycling of waste materials, such as spent acids and salts, are technical possibilities and are being pursued to accomplish additional waste reduction. Liquid waste stream polishing to remove final traces of plutonium and hazardous chemical constituents is accomplished through (a) process modifications, (b) use of alternative chemicals and sorbents for residue removal, (c) acid recycling, and (d) judicious use of a variety of waste polishing technologies. Technologies that show promise in waste minimization and pollution prevention are identified. Working toward this goal of pollution prevention is a worthwhile endeavor, not only for Los Alamos, but for the Nuclear Complex of the future

  3. Preventing pollution from plutonium processing

    International Nuclear Information System (INIS)

    Pillay, K.K.S.

    1995-01-01

    The plutonium processing facility at Los Alamos has adopted the strategic goal of becoming a facility that processes plutonium in a way that produces only environmentally benign waste streams. Pollution prevention through source reduction and environmentally sound recycling are being pursued. General approaches to waste reductions are administrative controls, modification of process technologies, and additional waste polishing. Recycling of waste materials, such as spent acids and salts, are technical possibilities and are being pursued to accomplish additional waste reduction. Liquid waste stream polishing to remove final traces of plutonium and hazardous chemical constituents is accomplished through process modifications, use of alternative chemicals and sorbents for residue removal, acid recycling, and judicious use of a variety of waste polishing technologies. Technologies that show promise in waste minimization and pollution prevention are identified. Working toward this goal of pollution prevention is a worthwhile endeavor , not only for Los Alamos, but for the Nuclear Complex of the future. (author) 12 refs.; 2 figs

  4. Pollution Prevention in Air Force System Acquisition Programs

    Science.gov (United States)

    1994-09-01

    noise requirements, handling radioactive materials, etc. The values should 278 be expressed in terms of indicators that, either quantitatively or...Structure pollhtion prevention ana~lysis Polution Prevention Analysis (PPA)? NEPA w/pollution prevention information - pollution Change prevention...Accumulation Procedures PS 81,04 Waste Jet Fuel Handling and Disposal Safe Practice Instructions (SPI) SPI 104 Radioactive Waste SPI 206 Mercury

  5. Waste Minimization and Pollution Prevention Awareness Plan

    International Nuclear Information System (INIS)

    1994-04-01

    The purpose of this plan is to document Lawrence Livermore National Laboratory (LLNL) projections for present and future waste minimization and pollution prevention. The plan specifies those activities and methods that are or will be used to reduce the quantity and toxicity of wastes generated at the site. It is intended to satisfy Department of Energy (DOE) requirements. This Plan provides an overview of projected activities from FY 1994 through FY 1999. The plans are broken into site-wide and problem-specific activities. All directorates at LLNL have had an opportunity to contribute input, to estimate budget, and to review the plan. In addition to the above, this plan records LLNL's goals for pollution prevention, regulatory drivers for those activities, assumptions on which the cost estimates are based, analyses of the strengths of the projects, and the barriers to increasing pollution prevention activities

  6. Pollution prevention program plan 1996

    International Nuclear Information System (INIS)

    1996-01-01

    This plan serves as the principal crosscutting guidance to Department of Energy (DOE) Headquarters, Operations Office, laboratory, and contractor management to fully implement pollution prevention programs within the DOE complex between now and 2000. To firmly demonstrate DOE's commitment to pollution prevention, the Secretary of Energy has established goals, to be achieved by December 31, 1999, that will aggressively reduce DOE's routine generation of radioactive, mixed, and hazardous wastes, and total releases and offsite transfers of toxic chemicals. The Secretary also has established sanitary waste reduction, recycling, and affirmative procurement goals. Site progress in meeting these goals will be reported annually to the Secretary in the Annual Report on Waste Generation and Waste Minimization Progress, using 1993 as the baseline year. Implementation of this plan will represent a major step toward reducing the environmental risks and costs associated with DOE operations

  7. Waste Minimization and Pollution Prevention Awareness Plan

    International Nuclear Information System (INIS)

    1992-01-01

    The purpose of this plan is to document the Lawrence Livermore National Laboratory (LLNL) Waste Minimization and Pollution Prevention Awareness Program. The plan specifies those activities and methods that are or will be employed to reduce the quantity and toxicity of wastes generated at the site. It is intended to satisfy Department of Energy (DOE) and other legal requirements that are discussed in Section C, below. The Pollution Prevention Awareness Program is included with the Waste Minimization Program as suggested by DOE Order 5400.1. The intent of this plan is to respond to and comply with the Department's policy and guidelines concerning the need for pollution prevention. The Plan is composed of a LLNL Waste Minimization and Pollution Prevention Awareness Program Plan and, as attachments, Directorate-, Program- and Department-specific waste minimization plans. This format reflects the fact that waste minimization is considered a line management responsibility and is to be addressed by each of the Directorates, Programs and Departments. Several Directorates have been reorganized, necessitating changes in the Directorate plans that were published in 1991

  8. Pollution prevention applications in batch manufacturing operations

    Science.gov (United States)

    Sykes, Derek W.; O'Shaughnessy, James

    2004-02-01

    Older, "low-tech" batch manufacturing operations are often fertile grounds for gains resulting from pollution prevention techniques. This paper presents a pollution prevention technique utilized for wastewater discharge permit compliance purposes at a batch manufacturer of detergents, deodorants, and floor-care products. This manufacturer generated industrial wastewater as a result of equipment rinses required after each product batch changeover. After investing a significant amount of capital on end of pip-line wastewater treatment technology designed to address existing discharge limits, this manufacturer chose to investigate alternate, low-cost approaches to address anticipated new permit limits. Mass balances using spreadsheets and readily available formulation and production data were conducted on over 300 products to determine how each individual product contributed to the total wastewater pollutant load. These mass balances indicated that 22 products accounted for over 55% of the wastewater pollutant. Laboratory tests were conducted to determine whether these same products could accept their individual changeover rinse water as make-up water in formulations without sacrificing product quality. This changeover reuse technique was then implement at the plant scale for selected products. Significant reductions in wastewater volume (25%) and wastewater pollutant loading (85+%) were realized as a direct result of this approach.

  9. Guide to Pollution Prevention in Your Community.

    Science.gov (United States)

    Luppino, Tony; Gilbert, Reg

    The purpose of this guide is to help citizen advocates create and improve the environmental practices of industry and government in the Great Lakes Basin. The practices advocated focus on pollution prevention instead of relying solely on pollution control. An introduction examines the larger issues of pollution prevention and zero discharge as the…

  10. Executive summary, Hanford Site Pollution Prevention Plan

    International Nuclear Information System (INIS)

    1992-08-01

    A pollution prevention plan is an organized, comprehensive, and continual effort to systematically reduce waste generation. The Hanford Site Pollution Prevention Plan is designed to eliminate or minimize pollutant releases to all environmental media from all aspects of Site operations. These efforts offer increased protection of public health and the environment. This plan reflects the goals and policies for pollution prevention at the Hanford Site and represents an ongoing effort to make pollution prevention part of the Site operating philosophy. The plan encompasses hazardous waste only and excludes radioactive waste and radioactive mixed waste

  11. Orientation to pollution prevention for facility design

    Energy Technology Data Exchange (ETDEWEB)

    Raney, E.A.; Whitehead, J.K.; Encke, D.B. [Westinghouse Hanford Co., Richland, WA (United States); Dorsey, J.A. [Kaiser Engineers Hanford Co., Richland, WA (United States)

    1994-01-01

    This material was developed to assist engineers in incorporating pollution prevention into the design of new or modified facilities within the U.S. Department of Energy (DOE). The material demonstrates how the design of a facility can affect the generation of waste throughout a facility`s entire life and it offers guidance on how to prevent the generation of waste during design. Contents include: Orientation to pollution prevention for facility design training course booklet; Pollution prevention design guideline; Orientation to pollution prevention for facility design lesson plan; Training participant survey and pretest; and Training facilitator`s guide and schedule.

  12. Accelerator production of tritium pollution prevention design assessment

    International Nuclear Information System (INIS)

    Reynolds, R.; Nowacki, P.; Sheetz, S.O.; Lanik, P.

    1997-01-01

    This Pollution Prevention Design Assessment (PPDA) provides data for cost-benefit analysis of the potential environmental impact of the APT, is an integral part of pollution prevention/waste minimization, and is required by DOE for any activity generating radioactive, hazardous, and mixed wastes. It will also better position the APT to meet future requirements, since it is anticipated that regulatory and other requirements will continue to become more restrictive and demanding

  13. Accelerator production of tritium pollution prevention design assessment

    Energy Technology Data Exchange (ETDEWEB)

    Reynolds, R.; Nowacki, P.; Sheetz, S.O. [Westinghouse Savannah River Co., Aiken, SC (United States); Lanik, P. [Burns and Roe Engineering Inc. (United States)

    1997-09-18

    This Pollution Prevention Design Assessment (PPDA) provides data for cost-benefit analysis of the potential environmental impact of the APT, is an integral part of pollution prevention/waste minimization, and is required by DOE for any activity generating radioactive, hazardous, and mixed wastes. It will also better position the APT to meet future requirements, since it is anticipated that regulatory and other requirements will continue to become more restrictive and demanding.

  14. Air pollution prevention at the Hanford Site: Status and recommendations

    International Nuclear Information System (INIS)

    Engel, J.A.

    1995-08-01

    With the introduction of the Clean Air Act Amendments of 1990 and other air and pollution prevention regulations, there has been increased focus on both pollution prevention and air emissions at US DOE sites. The Pollution Prevention (P2) Group of WHC reviewed the status of air pollution prevention with the goal of making recommendations on how to address air emissions at Hanford through pollution prevention. Using the air emissions inventory from Hanford's Title V permit, the P2 Group was able to identify major and significant air sources. By reviewing the literature and benchmarking two other DOE Sites, two major activities were recommended to reduce air pollution and reduce costs at the Hanford Site. First, a pollution prevention opportunity assessment (P2OA) should be conducted on the significant painting sources in the Maintenance group and credit should be taken for reducing the burning of tumbleweeds, another significant source of air pollution. Since they are significant sources, reducing these emissions will reduce air emission fees, as well as have the potential to reduce material and labor costs, and increase worker safety. Second, a P2OA should be conducted on alternatives to the three coal-fired powerhouses (steam plants) on-site, including a significant costs analysis of alternatives. This analysis could be of significant value to other DOE sites. Overall, these two activities would reduce pollution, ease regulatory requirements and fees, save money, and help Hanford take a leadership role in air pollution prevention

  15. Environmental Pollution Prevention, Control and Abatement

    Science.gov (United States)

    1977-08-30

    AD-A271 117 fDATE August 30. 1977 ASD (ORA&L) Department of Defense Instruction SUBJECT: Environmental Pollution Prevention, Control and Abatement...Ensure that any funds appropriated and apportioned for the prevention, control, and abatement of environmental pollution are not used for any other...77 References (a) Executive Order 11752, "Prevention, Control, and Abatement of Environmental Pollution at Federal Facilities," December 19, 1973 (b

  16. Idaho National Laboratory Site Pollution Prevention Plan

    International Nuclear Information System (INIS)

    E. D. Sellers

    2007-01-01

    It is the policy of the Department of Energy (DOE) that pollution prevention and sustainable environmental stewardship will be integrated into DOE operations as a good business practice to reduce environmental hazards, protect environmental resources, avoid pollution control costs, and improve operational efficiency and mission sustainability. In furtherance of this policy, DOE established five strategic, performance-based Pollution Prevention (P2) and Sustainable Environmental Stewardship goals and included them as an attachment to DOE O 450.1, Environmental Protection Program. These goals and accompanying strategies are to be implemented by DOE sites through the integration of Pollution Prevention into each site's Environmental Management System (EMS). This document presents a P2 and Sustainability Program and corresponding plan pursuant to DOE Order 450.1 and DOE O 435.1, Radioactive Waste Management. This plan is also required by the state of Idaho, pursuant to the Resource Conservation and Recovery Act (RCRA) partial permit. The objective of this document is to describe the Idaho National Laboratory (INL) Site P2 and Sustainability Program. The purpose of the program is to decrease the environmental footprint of the INL Site while providing enhanced support of its mission. The success of the program is dependent on financial and management support. The signatures on the previous page indicate INL, ICP, and AMWTP Contractor management support and dedication to the program. P2 requirements have been integrated into working procedures to ensure an effective EMS as part of an Integrated Safety Management System (ISMS). This plan focuses on programmatic functions which include environmentally preferable procurement, sustainable design, P2 and Sustainability awareness, waste generation and reduction, source reduction and recycling, energy management, and pollution prevention opportunity assessments. The INL Site P2 and Sustainability Program is administratively

  17. Idaho National Laboratory Site Pollution Prevention Plan

    Energy Technology Data Exchange (ETDEWEB)

    E. D. Sellers

    2007-03-01

    It is the policy of the Department of Energy (DOE) that pollution prevention and sustainable environmental stewardship will be integrated into DOE operations as a good business practice to reduce environmental hazards, protect environmental resources, avoid pollution control costs, and improve operational efficiency and mission sustainability. In furtherance of this policy, DOE established five strategic, performance-based Pollution Prevention (P2) and Sustainable Environmental Stewardship goals and included them as an attachment to DOE O 450.1, Environmental Protection Program. These goals and accompanying strategies are to be implemented by DOE sites through the integration of Pollution Prevention into each site's Environmental Management System (EMS). This document presents a P2 and Sustainability Program and corresponding plan pursuant to DOE Order 450.1 and DOE O 435.1, Radioactive Waste Management. This plan is also required by the state of Idaho, pursuant to the Resource Conservation and Recovery Act (RCRA) partial permit. The objective of this document is to describe the Idaho National Laboratory (INL) Site P2 and Sustainability Program. The purpose of the program is to decrease the environmental footprint of the INL Site while providing enhanced support of its mission. The success of the program is dependent on financial and management support. The signatures on the previous page indicate INL, ICP, and AMWTP Contractor management support and dedication to the program. P2 requirements have been integrated into working procedures to ensure an effective EMS as part of an Integrated Safety Management System (ISMS). This plan focuses on programmatic functions which include environmentally preferable procurement, sustainable design, P2 and Sustainability awareness, waste generation and reduction, source reduction and recycling, energy management, and pollution prevention opportunity assessments. The INL Site P2 and Sustainability Program is administratively

  18. Pollution prevention: The new environmental ethic

    International Nuclear Information System (INIS)

    Breen, J.J.; Dellarco, M.J.

    1991-01-01

    EPA is embarking on a new major environmental policy initiative: pollution prevention. It obviates the short-comings of end-of-pipe regulations and fosters efforts for industry to modify production practices to prevent pollution. For its part, the Agency has adopted this initiative in research and development, regulatory program development, and technology transfer activities. Research and Development programs are being established to address chemical substitution, reductions in chemical usage, product life cycles, and recycling. Regulatory programs are incorporating pollution prevention in major strategies of product stewardship and hazardous waste management. Technology transfer activities are designed to inform and educate industry and the public through Agency sponsored programs with the Pollution Prevention Information Center and the American Pollution Prevention Institute

  19. Pollution prevention opportunity assessment: Foundation of pollution prevention for waste management

    International Nuclear Information System (INIS)

    Damewood, R.W.

    1994-01-01

    The objective of this paper is to promote the Pollution Prevention Opportunity Assessment (PPOA) technique as a fundamental of pollution prevention for waste management. All key elements of an effective PPOA program are presented. These key elements include impacts of environmental laws on pollution prevention, PPOA concepts and overview, waste minimization opportunities assessment, reporting and monitoring waste minimization progress, and PPOA program implementation. As environmental laws evolve the focus is shifting from end-of-pipe pollution control to front-end source reduction. Waste minimization was mistakenly interpreted to mean the reduction of hazardous waste after generation in the past. The Pollution Prevention Act of 1990 has clearly defined its requirement on resource reduction. Waste reduction can be viewed as a criterion to assess all industrial processes and operations. The fundamental approach of PPOA focuses on a mass balance concept. This concept deals with tracking of chemicals from the point of purchase, through storage, utilization in the process, and waste generation at the end of process. In other words, PPOA is a technique to analyze this input/output process. By applying PPOA techniques, the framework of applicable compliance requirements to the current operation process is established. Furthermore, documentation of PPOA itself can meet as documentation requirements for environmental compliance. In general, the PPOA process consists of two phases. The first phase involves input and output process description and waste characterization. The second phase is an opportunities assessment for waste minimization from input/output waste characterization. These two phases are explained in detail in the paper

  20. EPA Definition of Pollution Prevention

    Science.gov (United States)

    This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

  1. Air pollution: Impact and prevention

    OpenAIRE

    SIERRA-VARGAS, MARTHA PATRICIA; TERAN, LUIS M

    2012-01-01

    ABSTRACT Air pollution is becoming a major health problem that affects millions of people worldwide. In support of this observation, the World Health Organization estimates that every year, 2.4 million people die because of the effects of air pollution on health. Mitigation strategies such as changes in diesel engine technology could result in fewer premature mortalities, as suggested by the US Environmental Protection Agency. This review: (i) discusses the impact of air pollution on respirat...

  2. 33 CFR 151.19 - International Oil Pollution Prevention (IOPP) Certificates.

    Science.gov (United States)

    2010-07-01

    ... International Oil Pollution Prevention (IOPP) Certificates. (a) Each U.S. oil tanker of 150 gross tons and above... Oil Pollution Prevention (IOPP) Certificate. (b) Each oil tanker of 150 gross tons and above and each... construction, equipment, fittings, or arrangements required by the pollution prevention requirements of parts...

  3. Environmental Restoration Contractor Waste Minimization and Pollution Prevention Plan

    International Nuclear Information System (INIS)

    Lewis, R.A.

    1994-11-01

    The purpose of this plan is to establish the Environmental Restoration Contractor (ERC) Waste Minimization and Pollution Prevention (WMin/P2) Program and outline the activities and schedules that will be employed to reduce the quantity and toxicity of wastes generated as a result of restoration and remediation activities. It is intended to satisfy the US Department of Energy (DOE) and other legal requirements. As such, the Pollution Prevention Awareness program required by DOE Order 5400.1 is included with the Pollution Prevention Program. This plan is also intended to aid projects in meeting and documenting compliance with the various requirements for WMin/P2, and contains the policy, objectives, strategy, and support activities of the WMin/P2 program. The basic elements of the plan are pollution prevention goals, waste assessments of major waste streams, implementation of feasible waste minimization opportunities, and a process for reporting achievements. Various pollution prevention techniques will be implemented with the support of employee training and awareness programs to reduce waste and still meet applicable requirements. Information about the Hanford Site is in the Hanford Site Waste Minimization and Pollution Prevention Awareness Program Plan

  4. Environmental Restoration Contractor Waste Minimization and Pollution Prevention Plan

    International Nuclear Information System (INIS)

    Duvon, D. K.

    1998-01-01

    This plan contains the Pollution Prevention (P2) Program for the Environmental Restoration Contractor (ERC). The plan outlines the activities and schedules developed by the Bechtel Hanford, Inc.(BHI) to reduce the quantity and toxicity of waste dispositioned as a result of restoration and remediation activities. The purpose of this plan is to guide ERC projects in meeting and documenting compliance with requirements for pollution prevention. This plan contains the objectives, strategy, and support activities of the ERC P2 Program

  5. GIS, Pollution Prevention and Public Health

    Science.gov (United States)

    Using examples of preventing pollution and reducing risk of exposure to communities, this guide answers basic interest and start-up questions, addresses benefits and limitations and illustrates the value of GIS for local health departments.

  6. Pollution Prevention Guideline for Academic Laboratories.

    Science.gov (United States)

    Li, Edwin; Barnett, Stanley M.; Ray, Barbara

    2003-01-01

    Explains how to manage waste after a classroom laboratory experiment which generally has the potential to generate large amounts of waste. Focuses on pollution prevention and the selection processes to eliminate or minimize waste. (YDS)

  7. Pollution Prevention Information Network (PPIN) Grant Summaries 2014

    Science.gov (United States)

    The Office of Pollution Prevention and Toxics is responsible for overseeing several grant programs for tribes and states which promote pollution prevention through source reduction and resource conservation.

  8. Purpose and methods of a Pollution Prevention Awareness Program

    Energy Technology Data Exchange (ETDEWEB)

    Flowers, P.A.; Irwin, E.F.; Poligone, S.E.

    1994-08-15

    The purpose of the Pollution Prevention Awareness Program (PPAP), which is required by DOE Order 5400.1, is to foster the philosophy that prevention is superior to remediation. The goal of the program is to incorporate pollution prevention into the decision-making process at every level throughout the organization. The objectives are to instill awareness, disseminate information, provide training and rewards for identifying the true source or cause of wastes, and encourage employee participation in solving environmental issues and preventing pollution. PPAP at the Oak Ridge Y-12 Plant was created several years ago and continues to grow. We believe that we have implemented several unique methods of communicating environmental awareness to promote a more active work force in identifying ways of reducing pollution.

  9. Sandia National Laboratories, California Pollution Prevention Program annual report.

    Energy Technology Data Exchange (ETDEWEB)

    Harris, Janet S.

    2011-04-01

    The annual program report provides detailed information about all aspects of the SNL/CA Pollution Prevention Program for a given calendar year. It functions as supporting documentation to the SNL/CA Environmental Management System Program Manual. The program report describes the activities undertaken during the past year, and activities planned in future years to implement the Pollution Prevention Program, one of six programs that supports environmental management at SNL/CA. Pollution Prevention supports the goals and objectives to increase the procurement and use of environmentally friendly products and materials and minimize the generation of waste (nonhazardous, hazardous, radiological, wastewater). Through participation on the Interdisciplinary Team P2 provides guidance for integration of environmentally friendly purchasing and waste minimization requirements into projects during the planning phase. Table 7 presents SNL's corporate objectives and targets that support the elements of the Pollution Prevention program.

  10. Waste minimization and pollution prevention awareness plan. Revision 1

    International Nuclear Information System (INIS)

    1994-07-01

    The purpose of this plan is to document Lawrence Livermore National Laboratory (LLNL) projections for present and future waste minimization and pollution prevention. The plan specifies those activities and methods that are or will be used to reduce the quantity and toxicity of wastes generated at the site. It is intended to satisfy Department of Energy (DOE) requirements. This Waste Minimization and Pollution Prevention Awareness Plan provides an overview of projected activities from FY 1994 through FY 1999. The plans are broken into site-wide and problem-specific activities. All directorates at LLNL have had an opportunity to contribute input, estimate budgets, and review the plan. In addition to the above, this plan records LLNL's goals for pollution prevention, regulatory drivers for those activities, assumptions on which the cost estimates are based, analyses of the strengths of the projects, and the barriers to increasing pollution prevention activities

  11. Pressures on industry to move to pollution prevention

    International Nuclear Information System (INIS)

    Poiasek, R.B.

    1991-01-01

    In a recent EPA report entitled Reducing Risk: Sorting Priorities and Strategies for Environmental Protection, a recommendation was made that EPA should emphasize pollution prevention as the preferred option for reducing risk. A significant number of states have adopted legislation requiring industry to conduct pollution prevention planning activities and submit reports to the state agencies. Federal legislation may be on the way. Industrial trade organizations are looking at the Chemical Manufacturing Association's Responsible Care: Program. Institutional investment groups are looking at initiatives like the Valdez Principles when selecting its portfolio, each of these initiatives have pollution prevention components. Environmentalists are demanding further attention be paid to pollution prevention. Industry is responding with a variety of programs designed to move them away from the classic end-of-the pipe controls which EPA mandated in previous regulations

  12. Sandia National Laboratories, California Pollution Prevention Program annual report

    International Nuclear Information System (INIS)

    Harris, Janet S.

    2011-01-01

    The annual program report provides detailed information about all aspects of the SNL/CA Pollution Prevention Program for a given calendar year. It functions as supporting documentation to the SNL/CA Environmental Management System Program Manual. The program report describes the activities undertaken during the past year, and activities planned in future years to implement the Pollution Prevention Program, one of six programs that supports environmental management at SNL/CA. Pollution Prevention supports the goals and objectives to increase the procurement and use of environmentally friendly products and materials and minimize the generation of waste (nonhazardous, hazardous, radiological, wastewater). Through participation on the Interdisciplinary Team P2 provides guidance for integration of environmentally friendly purchasing and waste minimization requirements into projects during the planning phase. Table 7 presents SNL's corporate objectives and targets that support the elements of the Pollution Prevention program.

  13. B Plant Complex pollution prevention plan. Revision 1

    International Nuclear Information System (INIS)

    Beam, T.G.

    1994-01-01

    The US Department of Energy (DOE) has directed Westinghouse Hanford Company (WHC) to develop an effective strategy to minimize the generation of hazardous, radioactive, and mixed wastes at Hanford in compliance with state and federal regulations. WHC has formalized a pollution prevention program composed of management policies, management requirements and procedures. This plan addresses pollution prevention for B Plant Complex. A pollution prevention team is in place and has been assigned responsibility for implementing the plan. This plan includes actions and goals for reducing volume and toxicity of waste generated, as well as a basis for evaluation of progress. Descriptions of waste streams, current specific goals, general pollution prevention methods, and specific accomplishments are in the appendices of this plan

  14. Pollution prevention constraints within DOE facilities

    International Nuclear Information System (INIS)

    Walzer, A.E.

    1992-01-01

    The signing of the Pollution Prevention Act of 1990, has marked a new environmental era. The 1990s environmental movement is shifting from ''end of the pipe'' treatment towards a philosophy of source reduction (predicated by the Pollution Prevention Act), where engineering solutions and materials substitution are sought to reduce the volume and toxicity of waste. This change comes after 20 years of treatment legislation, where in many cases the location or media in which our pollution is deposited was merely changed. This problem is exemplified by the enormous environmental problems created by waste sites. Our inability to deal with the substantial waste generated has produced the environmental legacy on the Department of Energy (DOE) sites, a legacy that will cost billions of dollars to remediate. How then do we solve our waste problems and avoid future legacies? This paper outlines some of the obstacles to pollution prevention within the DOE system and explores opportunities to remove these barriers. Industry, whose foundation is economics, has found it attractive to reduce their wastes, particularly in the wake of escalating waste disposal costs. However, within federal facilities where basic economic principles do not prevail, incentives towards pollution prevention need to be evaluated. Our current system of segregated DOE programs creates obstacles for waste generators to work productively with other programs. Certain policies and practices also limit the generators' responsibility and costs for their waste, which is counter productive to waste minimization and pollution prevention. To meet new environmental challenges and to be proactive in pollution prevention we must evaluate our systems and remove barriers that impede progress toward pollution prevention

  15. Pollution prevention: The role of a university

    Energy Technology Data Exchange (ETDEWEB)

    Barkenbus, J.N. [Univ. of Tennessee, Knoxville, TN (United States)

    1995-12-01

    Pollution prevention is at the top of the waste management hierarchy in the United States. If you don`t create pollution in the first place, concerns about transportation, treatment, storage, and disposal of waste are moot. While industry is on the front line in accomplishing significant pollution prevention, universities can play a meaningful role in its accomplishment as well. Universities can do this through three basic missions: education, research, and public service. Examples of how this is carried out at the University of Tennessee, Knoxville are provided. To be fully effective, universities need to organize in an interdisciplinary manner and adopt a public outreach agenda.

  16. 77 FR 63803 - Federal Acquisition Regulation; Information Collection; Pollution Prevention and Right-to-Know...

    Science.gov (United States)

    2012-10-17

    ...; Information Collection; Pollution Prevention and Right-to-Know Information (FAR 52.223-5) AGENCY: Department... previously approved information collection requirement concerning pollution prevention and right-to-know..., Pollution Prevention and Right-to-Know Information'' on your attached document. Fax: 202-501-4067. Mail...

  17. 40 CFR 63.2495 - How do I comply with the pollution prevention standard?

    Science.gov (United States)

    2010-07-01

    ... Manufacturing Alternative Means of Compliance § 63.2495 How do I comply with the pollution prevention standard? (a) You may elect to comply with the pollution prevention alternative requirements specified in... comply by using the pollution prevention alternative must begin with the same starting material(s) and...

  18. Pollution prevention projects in the Netherlands

    NARCIS (Netherlands)

    de Bruijn, Theo; Coenen, Franciscus H.J.M.; Lulofs, Kristiaan R.D.

    1996-01-01

    As part of its waste matter prevention policy, the Dutch government has tried over the past few years to stimulate pollution prevention in firms by means of so-called stimulation and learning projects. To be able to determine the effectiveness of future policies, an extensive evaluation study was

  19. Pollution Prevention Successes Database (P2SDb) user guide

    International Nuclear Information System (INIS)

    1995-07-01

    When Pollution Prevention Opportunity Assessments (P2OAs) were launched at the Hanford Site during the summer of 1994, the first comment received from those using them expressed the desire for a method to report assessments electronically. As a temporary measure, macros were developed for use on word processing systems, but a more formal database was obviously needed. Additionally, increased DOE and Washington state reporting requirements for pollution prevention suggested that a database system would streamline the reporting process. The Pollution Prevention Group of Westinghouse Hanford Company (WHC) contracted with the Data Automation Engineering Department from ICF Kaiser Hanford Company (ICFKH) to develop the system. The scope was to develop a database that will track P2OAs conducted by the facilities and contractors at the Hanford Site. It will also track pollution prevention accomplishments that are not the result of P2OAs and document a portion of the Process Waste Assessments conducted in the past. To accommodate the above criteria, yet complete the system in a timely manner, the Pollution Prevention Successes Database (P2SDb) is being implemented in three phases. The first phase will automate the worksheets to provide both input and output of the data associated with the worksheets. The second phase will automate standard summary reports and ad hoc reports. The third phase will provide automated searching of the database to facilitate the sharing of pollution prevention experiences among various users. This User's Guide addresses only the Phase 1 system

  20. DOE's Pollution Prevention Information Clearinghouse (EPIC)

    International Nuclear Information System (INIS)

    Otis, P.T.

    1994-05-01

    The US Department of Energy's (DOE's) Pollution Prevention Information Clearinghouse (EPIC) is a computer system intended for the exchange of pollution prevention information DOE-wide. EPIC is being developed as a distributed system that will allow access to other databases and applications. The first prototype of EPIC (Prototype I) was put on-line in January 1994. Prototype I contains information on EM-funded pollution prevention projects; relevant laws, regulations, guidance, and policy; facility and DOE contacts; and meetings and conferences. Prototype I also gives users access to the INEL Hazardous Solvent Substitution Data System (HSSDS) and to information contained on the US Environmental Protection Agency's (EPNS) Pollution Prevention Infbrmation Exchange System (PIES) as a test of the distributed system concept. An initial user group of about 35 is testing and providing feedback on Prototype I. Prototype II, with a Graphical User Interface (GUI), is planned for the end of CY94. This paper describes the current state of EPIC in terms of architecture, user interface, and information content. Plans for Prototype II and the final system are then discussed. The EPIC development effort is being coordinated with EPA and US Department of Defense (DoD) efforts to develop or upgrade their pollution prevention information exchange systems

  1. Waste minimization and pollution prevention awareness plan

    Energy Technology Data Exchange (ETDEWEB)

    1991-05-31

    The purpose of this plan is to document the Lawrence Livermore National Laboratory (LLNL) Waste Minimization and Pollution Prevention Awareness Program. The plan specifies those activities and methods that are or will be employed to reduce the quantity and toxicity of wastes generated at the site. The intent of this plan is to respond to and comply with (DOE's) policy and guidelines concerning the need for pollution prevention. The Plan is composed of a LLNL Waste Minimization and Pollution Prevention Awareness Program Plan and, as attachments, Program- and Department-specific waste minimization plans. This format reflects the fact that waste minimization is considered a line management responsibility and is to be addressed by each of the Programs and Departments. 14 refs.

  2. Waste minimization and pollution prevention awareness plan

    International Nuclear Information System (INIS)

    1991-01-01

    The purpose of this plan is to document the Lawrence Livermore National Laboratory (LLNL) Waste Minimization and Pollution Prevention Awareness Program. The plan specifies those activities and methods that are or will be employed to reduce the quantity and toxicity of wastes generated at the site. The intent of this plan is to respond to and comply with (DOE's) policy and guidelines concerning the need for pollution prevention. The Plan is composed of a LLNL Waste Minimization and Pollution Prevention Awareness Program Plan and, as attachments, Program- and Department-specific waste minimization plans. This format reflects the fact that waste minimization is considered a line management responsibility and is to be addressed by each of the Programs and Departments. 14 refs

  3. Development of Pollution Prevention Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Polle, Juergen [Brooklyn College, The City University of New York (CUNY), Brooklyn, New York, (United States); Sanchez-Delgado, Roberto [Brooklyn College, The City University of New York (CUNY), Brooklyn, New York, (United States)

    2013-12-30

    This project investigated technologies that may reduce environmental pollution. This was a basic research/educational project addressing two major areas: A. In the algae research project, newly isolated strains of microalgae were investigated for feedstock production to address the production of renewable fuels. An existing collection of microalgae was screened for lipid composition to determine strains with superior composition of biofuel molecules. As many microalgae store triacylglycerides in so-called oil bodies, selected candidate strains identified from the first screen that accumulate oil bodies were selected for further biochemical analysis, because almost nothing was known about the biochemistry of these oil bodies. Understanding sequestration of triacylglycerides in intracellular storage compartments is essential to developing better strains for achieving high oil productivities by microalgae. At the onset of the project there was almost no information available on how to obtain detailed profiles of lipids from strains of microalgae. Our research developed analytical methods to determine the lipid profiles of novel microalgal strains. The project was embedded into other ongoing microalgal projects in the Polle laboratory. The project benefited the public, because students were trained in cell cultivation and in the operation of state-of-the-art analytical equipment. In addition, students at Brooklyn College were introduced into the concept of a systems biology approach to study algal biofuels production. B. A series of new nanostructured catalysts were synthesized, and characterized by a variety of physical and chemical methods. Our catalyst design leads to active nanostructures comprising small metal particles in intimate contact with strongly basic sites provided by the supports, which include poly(4-vinylpyridine), magnesium oxide, functionalized multi-walled carbon nanotubes, and graphene oxide. The new materials display a good potential as catalysts

  4. Pollution prevention opportunity assessment for Technical Art

    International Nuclear Information System (INIS)

    Torres, H.M.

    1995-09-01

    This pollution prevention opportunity assessment was conducted to evaluate Technical Art, which is part of the Technical Communications Department at Sandia National Laboratories/California. It is located in Building 912, Room 138. This assessment documents the processes, identifies the hazardous chemical waste streams generated by these processes, and recommends possible ways to minimize waste

  5. 76 FR 18894 - Oil Pollution Prevention

    Science.gov (United States)

    2011-04-06

    ... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 112 Oil Pollution Prevention CFR Correction In Title 40 of the Code of Federal Regulations, Parts 100 to 135, revised as of July 1, 2010, on page 71, in Appendix E to Part 112, the second section 5.1 is removed. [FR Doc. 2011-8328 Filed 4-5-11; 8:45 am...

  6. Pollution prevention opportunity assessments. Guidance for the Hanford Site

    International Nuclear Information System (INIS)

    Engel, J.A.

    1994-10-01

    The purpose of this document is to provide help to you, Hanford waste generators, in finding ways to reduce waste through Pollution Prevention (P2) and Pollution Prevention Opportunity Assessments (P2OAs). It is based on guidance from other sites, and serves to compliment the Hanford-specific training on P2OAs offered by the Pollution Prevention group at Westinghouse Hanford Company (WHC). The chapters of this document include help on how to choose major waste generating activities, how to conduct a P2OA, how to get results, and how to show progress. There is also a chapter on special situations and problems your facility may encounter. This first chapter tells you why you should consider conducting P2OAs and why they may be required

  7. PETROLEUM BIOREFINING FOR POLLUTION PREVENTION

    Energy Technology Data Exchange (ETDEWEB)

    John J. Kilbane II

    2002-03-01

    The objective of this project was to isolate and characterize thermophilic bacterial cultures that can be used for the selective removal of nitrogen, sulfur, and/or metals in the biorefining of petroleum. The project was completed on schedule and no major difficulties were encountered. Significant progress was made on multiple topics relevant to the development of a petroleum biorefining process capable of operating at thermophilic temperatures. New cultures capable of selectively cleaving C-N or C-S bonds in molecules relevant to petroleum were obtained, and the genes encoding the enzymes for these unique biochemical reactions were cloned and sequenced. Genetic tools were developed that enable the use of Thermus thermophilus as a host to express any gene of interest, and information was obtained regarding the optimum conditions for the growth of T. thermophilus. The development of a practical biorefining process still requires further research and the future research needs identified in this project include the development of new enzymes and pathways for the selective cleavage of C-N or C-S bonds that have higher specific activities, increased substrate range, and are capable of functioning at thermophilic temperatures. Additionally, there is a need for process engineering research to determine the maximum yield of biomass and cloned gene products that can be obtained in fed-batch cultures using T. thermophilus, and to determine the best configuration for a process employing biocatalysts to treat petroleum.

  8. D and D TECHNOLOGIES FOR POLLUTION PREVENTION

    International Nuclear Information System (INIS)

    Tripp, Julia L.

    2003-01-01

    A new Accelerated Site Technology Deployment (ASTD) project was awarded in FY 2002 to the Idaho National Engineering and Environmental Laboratory (INEEL) to deploy technologies that decrease pollution and waste in the areas of facility characterization, sludge treatment, dust and contamination control, and concrete demolition. This project was called ''D and D Technologies for Pollution Prevention'' and planned to deploy four different technologies. To reduce protective equipment requirements, waste generation, and risk of radiation exposure during facility characterization, the Russian Gamma Locater Device (GLD) and Isotopic Identification Device (IID) for remote characterization was investigated. The GLD detects gamma ray readings and video images remotely and uses radio communication to transmit the readings to personnel located a safe distance from the contaminated area. The IID, an integral part of the GLD, provides real-time spectrometric analysis of radiation sources for remotely identifying the specific radioactive isotopes present in the facility. At the INEEL, sludge has accumulated in the bottom of a fuel storage pool and the presence of heavy metals in the sludge makes it a mixed waste. This project planned to use LEADX(reg s ign) to treat sludge in place to effectively make all heavy metals in the sludge insoluble. LEADX(reg s ign) is a dry granular chemical additive (apatite) used for in-situ treatment of heavy-metal-contaminated material. LEADX(reg s ign) chemically bonds to any free heavy metals that it contacts and forms a stable, non-leachable molecule. After treating the sludge with LEADX(reg s ign), it was to be left in the basin and the pool filled with grout. The successful treatment of the sludge with LEADX(reg s ign) will reduce the amount of waste to be disposed at the burial ground by eliminating the need to remove the sludge from the basin. Many off-gas and duct systems being dismantled contain dust and lint that has been contaminated

  9. 77 FR 62452 - Approval and Promulgation of Implementation Plans; State of Arizona; Prevention of Air Pollution...

    Science.gov (United States)

    2012-10-15

    ... Promulgation of Implementation Plans; State of Arizona; Prevention of Air Pollution Emergency Episodes AGENCY... (SIP) revision submitted by the State of Arizona to address the requirements regarding air pollution... air pollution emergency episodes in CAA section 110(a)(2)(G). Section 110(a)(2)(G) requires that each...

  10. Pollution prevention and energy conservation: Understanding the interactions

    International Nuclear Information System (INIS)

    Purcell, A.H.

    1992-01-01

    The traditional view holds that pollution prevention is good for energy conservation and vice versa. Analysis of pollution prevention and energy conservation activities indicates, however, that interactions and synergies between environmental and energy factors can mean that pollution prevention can be energy intensive and, conversely, that energy conservation can lead to increased pollution. Full cost accounting, taking into account all media, must be performed before precise pollution prevention-energy conservation interrelationships can be characterized and quantified. Use of a pollution prevention-energy conservation matrix can further this understanding

  11. Safety installation for preventing pollution by pipelines

    Energy Technology Data Exchange (ETDEWEB)

    Wittgenstein, G F

    1972-10-25

    A safety installation for preventing pollution by pipelines, particularly those used for transporting liquid hydrocarbons, is described. It is applicable to any pipeline, but particularly to underground or submarine pipelines, whether made of steel, plastics, or any other material. The 4 essential objects of the invention are to insure reliable prevention of pollution of the environment due to leakage of a hydrocarbon through cracks in the pipe; to evacuate the leakage flow without delay to a vessel; to signal almost instantaneously the existence of a leak; and to effect remote control of operations by which the dynamic pressure in the pipe is cancelled. Each equipped section consists of a fluid-type jacket of plastic material which surrounds the pipe, which at its ends is sealed off. It is these seals which delimit the sections. (7 claims)

  12. Diving center contribution in preventing radioactive pollution

    International Nuclear Information System (INIS)

    Rus, Simona; Flesteriu, Catalin; Diaconu, Mihai

    2004-01-01

    Applying and developing constructive environment protection measures offers real and long lasting solutions that consolidate our future. In this context the Diving Center contribution in preventing radioactive pollution is enrolled. Our Center performed high quality services with authorised personal. Using their rich human, technological and scientific resources, the armed forces in general and our unity in this case, plays already an important role in supporting the development and natural environment, but results could be even greater and of high impact if the military and civilian requirements would be aligned, valorizing the qualified resources belonging to the military. The environment protection measures are an essential component of the sustainable development, which correctly and duly applied may provide a necessary and realistic option in the eternal confrontation between human activity and correct exploitation of environment. During pressure tests performed over years at the nuclear reactor from Cernavoda, the divers provided: - pressure test at Unit 1 reactor containment (test performed at a pressure of 128 kPa) in order to evaluate the loss rate; - solving previous problems of the sealing system of reactor containment and tracks of electrical cables, pipes, etc; - providing safety procedures for the Cernavoda NPP specialised personnel, after their entering the working area through the small transfer gate; - technical assistance and first aid in case of diving accidents, using the bi-place chamber (fitted with medication transfer sass) provided on site; - supervising the enforcement of legal procedures concerning training, organising and work protection in diving activities; - in case of a collective decompression accident, we had the responsibility to provide necessary treatment of personnel affected in the hyperbaric laboratory. All these activities, even though developed for specific military requirements, may satisfy the saving and protecting needs

  13. Hanford Site pollution prevention progress report 1999

    International Nuclear Information System (INIS)

    BETSCH, M.D.

    1999-01-01

    The Richland Operations Office (RL) and Office of River Protection (ORP) are pleased to issue the attached Pollution Prevention Progress Report. We have just met the most aggressive waste reduction and A recycling goals to date and are publishing this report to recognize A the site's progress, and to ensure it will sustain success beyond 1 Fiscal Year 2000. This report was designed to inform the been made by RL and ORP in Waste Minimization (WMin) and Pollution Prevention (P2). RL, ORP and their contractors are committed to protecting the environment, and we reiterate pollution prevention should continue to be at the forefront of the environmental cleanup and research efforts. As you read the attached report, we believe you will see a clear demonstration of RL and ORP's outstanding performance as it has been responsible and accountable to the nation, its employees, and the community in which we live and work. commitment that all employees have for environmental stewardship. The report provides useful information about the U.S. Department of Energy's (DOE'S) environmental policy and programs, and contains countless examples of waste minimization projects. This year was the first year our site received the White House Closing the Circle in the category of Affirmative Procurement. This Award recognizes our site for designing a comprehensive strategy for achieving 100 percent purchases of the U.S.Environmenta1 Protection Agency designated recycled items. DOE-Headquarters also acknowledged the site in 1999 for its public outreach efforts in communicating pollution prevention to Hanford Site employees and the community. Our site is truly a recognized leader in outreach as it has kept this title for two consecutive years. In previous years, we received the White House Closing the Circle Honorable Mention in Affirmative Procurement and several other National DOE Awards. Through partnership with the local community and stakeholders, the site and its contractors have a clear

  14. Hanford Site pollution prevention progress report; FINAL

    International Nuclear Information System (INIS)

    BETSCH, M.D.

    1999-01-01

    The Richland Operations Office (RL) and Office of River Protection (ORP) are pleased to issue the attached Pollution Prevention Progress Report. We have just met the most aggressive waste reduction and A recycling goals to date and are publishing this report to recognize A the site's progress, and to ensure it will sustain success beyond 1 Fiscal Year 2000. This report was designed to inform the been made by RL and ORP in Waste Minimization (WMin) and Pollution Prevention (P2). RL, ORP and their contractors are committed to protecting the environment, and we reiterate pollution prevention should continue to be at the forefront of the environmental cleanup and research efforts. As you read the attached report, we believe you will see a clear demonstration of RL and ORP's outstanding performance as it has been responsible and accountable to the nation, its employees, and the community in which we live and work. commitment that all employees have for environmental stewardship. The report provides useful information about the U.S. Department of Energy's (DOE'S) environmental policy and programs, and contains countless examples of waste minimization projects. This year was the first year our site received the White House Closing the Circle in the category of Affirmative Procurement. This Award recognizes our site for designing a comprehensive strategy for achieving 100 percent purchases of the U.S.Environmenta1 Protection Agency designated recycled items. DOE-Headquarters also acknowledged the site in 1999 for its public outreach efforts in communicating pollution prevention to Hanford Site employees and the community. Our site is truly a recognized leader in outreach as it has kept this title for two consecutive years. In previous years, we received the White House Closing the Circle Honorable Mention in Affirmative Procurement and several other National DOE Awards. Through partnership with the local community and stakeholders, the site and its contractors have a clear

  15. Local government`s pollution prevention program

    Energy Technology Data Exchange (ETDEWEB)

    Swanson, D. [Boulder Country Pollution Prevention Program, Boulder, CO (United States)

    1996-12-31

    The pollution prevention program operated by the Health Department of Boulder County is called Business Partners for a Clean Environment (Business Partners). It is a cooperative effort among local businesses, the City of Boulder, Boulder County, and the Boulder Chamber of Commerce. This nonregulatory, incentive-based program provides industry with pollution prevention information and technical assistance necessary to reduce and/or eliminate environmental waste. This paper provides an overview of the program development, creation of partnerships and trust, and some of the results from implementation of the program. Following the first 18 months of the program, 35 businesses were recognized as Business Partners. The Business Partners program has also received an achievement award from the National Association of Counties for promoting {open_quotes}responsible, responsive, and effective government{close_quotes} and two governor`s awards from the State of Colorado. Participating businesses have demonstrated that a pollution prevention program can reduce environmental waste, increase employee safety, and decrease costs. 4 refs., 4 figs., 5 tabs.

  16. Pollution prevention opportunity assessments, a training and resource guide

    Energy Technology Data Exchange (ETDEWEB)

    VALERO, O.J.

    1998-11-03

    The intention of the ''Pollution Prevention Opportunity Assessment Training and Resource Guide'' is to help Hanford waste generators identify ways to reduce waste through the Pollution Prevention Opportunity Assessment (P20A) process. This document presents pollution prevention tools and provides a step-by-step approach for conducting assessments.

  17. 46 CFR 71.25-37 - Pollution prevention.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Pollution prevention. 71.25-37 Section 71.25-37 Shipping... Annual Inspection § 71.25-37 Pollution prevention. At each inspection for certification, the inspector... pollution prevention in 33 CFR part 155, subpart B. [CGD 71-161R, 37 FR 28262, Dec. 21, 1972] ...

  18. Annotated Bibliography of Law-Related Pollution Prevention Sources.

    Science.gov (United States)

    Lynch, Holly; Murphy, Elaine

    This annotated bibliography of law-related pollution prevention sources was prepared by the National Pollution Prevention Center for Higher Education. Some topics of the items include waste reduction, hazardous wastes, risk reduction, environmental policy, pollution prevention, environmental protection, environmental leadership, environmental…

  19. Good Practice Guide Waste Minimization/Pollution Prevention

    Energy Technology Data Exchange (ETDEWEB)

    J Dorsey

    1999-10-14

    This Good Practice Guide provides tools, information, and examples for promoting the implementation of pollution prevention during the design phases of U.S. Department of Energy (DOE) projects. It is one of several Guides for implementing DOE Order 430.1, Life-cycle Asset Management. DOE Order 430.1 provides requirements for DOE, in partnership with its contractors, to plan, acquire, operate, maintain, and dispose of physical assets. The goals of designing for pollution prevention are to minimize raw material consumption, energy consumption, waste generation, health and safety impacts, and ecological degradation over the entire life of the facility (EPA 1993a). Users of this Guide will learn to translate national policy and regulatory requirements for pollution prevention into action at the project level. The Guide was written to be applicable to all DOE projects, regardless of project size or design phase. Users are expected to interpret the Guide for their individual project's circumstances, applying a graded approach so that the effort is consistent with the anticipated waste generation and resource consumption of the physical asset. This Guide employs a combination of pollution prevention opportunity assessment (PPOA) methods and design for environment (DfE) philosophies. The PPOA process was primarily developed for existing products, processes, and facilities. The PPOA process has been modified in this Guide to address the circumstances of the DOE design process as delineated in DOE Order 430.1 and its associated Good Practice Guides. This modified form of the PPOA is termed the Pollution Prevention Design Assessment (P2DA). Information on current nationwide methods and successes in designing for the environment also have been reviewed and are integrated into this guidance.

  20. Good Practice Guide Waste Minimization/Pollution Prevention; TOPICAL

    International Nuclear Information System (INIS)

    J Dorsey

    1999-01-01

    This Good Practice Guide provides tools, information, and examples for promoting the implementation of pollution prevention during the design phases of U.S. Department of Energy (DOE) projects. It is one of several Guides for implementing DOE Order 430.1, Life-cycle Asset Management. DOE Order 430.1 provides requirements for DOE, in partnership with its contractors, to plan, acquire, operate, maintain, and dispose of physical assets. The goals of designing for pollution prevention are to minimize raw material consumption, energy consumption, waste generation, health and safety impacts, and ecological degradation over the entire life of the facility (EPA 1993a). Users of this Guide will learn to translate national policy and regulatory requirements for pollution prevention into action at the project level. The Guide was written to be applicable to all DOE projects, regardless of project size or design phase. Users are expected to interpret the Guide for their individual project's circumstances, applying a graded approach so that the effort is consistent with the anticipated waste generation and resource consumption of the physical asset. This Guide employs a combination of pollution prevention opportunity assessment (PPOA) methods and design for environment (DfE) philosophies. The PPOA process was primarily developed for existing products, processes, and facilities. The PPOA process has been modified in this Guide to address the circumstances of the DOE design process as delineated in DOE Order 430.1 and its associated Good Practice Guides. This modified form of the PPOA is termed the Pollution Prevention Design Assessment (P2DA). Information on current nationwide methods and successes in designing for the environment also have been reviewed and are integrated into this guidance

  1. Convention on the Prevention of Marine Pollution by Dumping of Wastes and other Matter. The Definition Required by Annex I, paragraph 6 to the Convention and the Recommendations Required by Annex II, Section D

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1975-01-10

    Paragraph 6 of Annex I to the Convention on the Prevention of Marine Pollution by Dumping of Wastes and Other Matter provides for the Agency to define high-level radioactive wastes or other high-level radioactive matter as unsuitable for dumping at sea, and section D of Annex II provides for the Agency to make recommendations which the Contracting Parties to the Convention should take fully into account in issuing permits for the dumping at sea of radioactive wastes or other radioactive matter ''not included in Annex I''.

  2. Convention on the Prevention of Marine Pollution by Dumping of Wastes and other Matter. The Definition Required by Annex I, paragraph 6 to the Convention and the Recommendations Required by Annex II, Section D

    International Nuclear Information System (INIS)

    1975-01-01

    Paragraph 6 of Annex I to the Convention on the Prevention of Marine Pollution by Dumping of Wastes and Other Matter provides for the Agency to define high-level radioactive wastes or other high-level radioactive matter as unsuitable for dumping at sea, and section D of Annex II provides for the Agency to make recommendations which the Contracting Parties to the Convention should take fully into account in issuing permits for the dumping at sea of radioactive wastes or other radioactive matter ''not included in Annex I''.

  3. Pollution prevention at ports: clearing the air

    International Nuclear Information System (INIS)

    Bailey, Diane; Solomon, Gina

    2004-01-01

    Seaports are major hubs of economic activity and of environmental pollution in coastal urban areas. Due to increasing global trade, transport of goods through ports has been steadily increasing and will likely continue to increase in the future. Evaluating air pollution impacts of ports requires consideration of numerous sources, including marine vessels, trucks, locomotives, and off-road equipment used for moving cargo. The air quality impacts of ports are significant, with particularly large emissions of diesel exhaust, particulate matter, and nitrogen oxides. The health effects of these air pollutants to residents of local communities include asthma, other respiratory diseases, cardiovascular disease, lung cancer, and premature mortality. In children, there are links with asthma, bronchitis, missed school days, and emergency room visits. The significance of these environmental health impacts requires aggressive efforts to mitigate the problem. Approaches to mitigation encompass a range of possibilities from currently available, low-cost approaches, to more significant investments for cleaner air. Examples of the former include restrictions on truck idling and the use of low-sulfur diesel fuel; the latter includes shore-side power for docked ships, and alternative fuels. A precautionary approach to port-related air pollution would encourage local production of goods in order to reduce marine traffic, greener design for new terminals, and state-of-the art approaches to emissions-control that have been successfully demonstrated at ports throughout the world

  4. Pollution prevention opportunity assessments at Hanford

    Energy Technology Data Exchange (ETDEWEB)

    Betsch, M.D., Westinghouse Hanford

    1996-06-26

    The Pollution Prevention Opportunity Assessment (PPOA) is a pro- active way to look at a waste generating activity and identify opportunities to minimize wastes through a cost benefit analysis. Hanford`s PPOA process is based upon the graded approach developed by the Kansas City Plant. Hanford further streamlined the process while building in more flexibility for the individual users. One of the most challenging aspects for implementing the PPOA process at Hanford is one overall mission which is environmental restoration, Now that the facilities are no longer in production, each has a different non- routine activity making it difficult to quantify the inputs and outputs of the activity under consideration.

  5. Labor and pollution prevention in Canada.

    Science.gov (United States)

    Bennett, Dave

    2012-01-01

    This article gives an account of Canadian Chemicals Policy over the past three decades, including the project for the "virtual elimination" of toxic chemicals and the federal government's Chemical Management Plan. The latter is what remained when the virtual elimination program achieved few results. The article then embarks on its central theme: explaining how the labor movement introduced the concept and the practice of Pollution Prevention (P2) to Canada, as well as its impact on legislation and policies over the use reduction of chemical pesticides. The Appendix is a glossary of terms and concepts used in the article.

  6. 78 FR 30304 - Federal Acquisition Regulation; Submission for OMB Review; Pollution Prevention and Right-to-Know...

    Science.gov (United States)

    2013-05-22

    ...; Submission for OMB Review; Pollution Prevention and Right-to-Know Information (FAR 52.223-5) AGENCY... previously approved information collection requirement concerning pollution prevention and right-to-know... by Information Collection 9000- 0147, Pollution Prevention and Right-to-Know Information by any of...

  7. 46 CFR 131.935 - Prevention of oil pollution.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Prevention of oil pollution. 131.935 Section 131.935... Miscellaneous § 131.935 Prevention of oil pollution. Each vessel must be operated in compliance with— (a) Section 311 of the Federal Water Pollution Control Act, as amended (33 U.S.C. 1321); and (b) 33 CFR parts...

  8. Pollution prevention in the petroleum refining industry - bibliography

    International Nuclear Information System (INIS)

    Fournier, M.

    1995-03-01

    The Great Lakes Pollution Prevention Centre has compiled a list of references to assist the petroleum refining industry in adopting pollution prevention as an important environmental management strategy. Items included were divided into 14 categories of pollution types, such as air emissions, alternative fuels, chemical substitution, grounds keeping, leaks and spills, paints, waste management plan and others

  9. 76 FR 72120 - Oil Pollution Prevention; Spill Prevention, Control, and Countermeasure (SPCC) Rule-Compliance...

    Science.gov (United States)

    2011-11-22

    ... Oil Pollution Prevention; Spill Prevention, Control, and Countermeasure (SPCC) Rule--Compliance Date... rule will be effective November 22, 2011. List of Subjects in 40 CFR Part 112 Oil pollution prevention... Regulations is amended as follows: PART 112--OIL POLLUTION PREVENTION 0 1. The authority citation for part 112...

  10. 76 FR 64245 - Oil Pollution Prevention; Spill Prevention, Control, and Countermeasure (SPCC) Rule-Compliance...

    Science.gov (United States)

    2011-10-18

    ... Oil Pollution Prevention; Spill Prevention, Control, and Countermeasure (SPCC) Rule--Compliance Date... burden to comply with the regulations contained in 40 CFR part 112--Oil Pollution Prevention. However, in... rule will be effective November 7, 2011. List of Subjects in 40 CFR Part 112 Oil pollution prevention...

  11. Environmental Restoration Contractor Waste Minimization and Pollution Prevention Plan. Revision 1

    International Nuclear Information System (INIS)

    Lewis, R.A.

    1996-03-01

    This plan contains the Environmental Restoration Contractor (ERC) Waste Minimization and Pollution Prevention (WMin/P2) Program. The plan outlines the activities and schedules developed by the ERC to reduce the quantity and toxicity of waste dispositioned as a result of restoration and remediation activities. This plan satisfies US Department of Energy (DOE) requirements including the Pollution Prevention Awareness program required by DOE Order 5400.1 (DOE 1988). This plan is consistent with Executive Order 12856 and Secretary O'Leary's pollution prevention Policy Statement of December 27, 1994, which set US and DOE pollution prevention policies, respectively. It is also consistent with the DOE Pollution Prevention Crosscut Plan, 1994, which provides guidance in meeting the DOE goals in pollution prevention. The purpose of this plan is to aid ERC projects in meeting and documenting compliance with requirements for WMin/P2. This plan contains the objectives, strategy, and support activities of the ERC Team WMin/P2 program. The basic elements of the plan are pollution prevention goals, waste assessments of major waste streams, implementation of feasible waste minimization opportunities, and a process for reporting achievements. Wherever appropriate, the ERC will integrate the pollution prevention activities in this plan into regular program activities rather than establishing separate WMin/P2 activities. Moreover, wherever possible, existing documents, procedures, and activities will be used to meet WMin/P2 requirements

  12. A quantitative integrated assessment of pollution prevention achieved by integrated pollution prevention control licensing.

    Science.gov (United States)

    Styles, David; O'Brien, Kieran; Jones, Michael B

    2009-11-01

    This paper presents an innovative, quantitative assessment of pollution avoidance attributable to environmental regulation enforced through integrated licensing, using Ireland's pharmaceutical-manufacturing sector as a case study. Emissions data reported by pharmaceutical installations were aggregated into a pollution trend using an Environmental Emissions Index (EEI) based on Lifecycle Assessment methodologies. Complete sectoral emissions data from 2001 to 2007 were extrapolated back to 1995, based on available data. Production volume data were used to derive a sectoral production index, and determine 'no-improvement' emission trends, whilst questionnaire responses from 20 industry representatives were used to quantify the contribution of integrated licensing to emission avoidance relative to these trends. Between 2001 and 2007, there was a 40% absolute reduction in direct pollution from 27 core installations, and 45% pollution avoidance relative to hypothetical 'no-improvement' pollution. It was estimated that environmental regulation avoided 20% of 'no-improvement' pollution, in addition to 25% avoidance under business-as-usual. For specific emissions, avoidance ranged from 14% and 30 kt a(-1) for CO(2) to 88% and 598 t a(-1) for SO(x). Between 1995 and 2007, there was a 59% absolute reduction in direct pollution, and 76% pollution avoidance. Pollution avoidance was dominated by reductions in emissions of VOCs, SO(x) and NO(x) to air, and emissions of heavy metals to water. Pollution avoidance of 35% was attributed to integrated licensing, ranging from between 8% and 2.9 t a(-1) for phosphorus emissions to water to 49% and 3143 t a(-1) for SO(x) emissions to air. Environmental regulation enforced through integrated licensing has been the major driver of substantial pollution avoidance achieved by Ireland's pharmaceutical sector - through emission limit values associated with Best Available Techniques, emissions monitoring and reporting requirements, and

  13. Hanford site pollution prevention plan progress report, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Kirkendall, J.R.

    1996-08-26

    This report tracks progress made during 1995 against the goals stated in DOE/RL-92-62, Executive Summary, Hanford Site Pollution Prevention Plan. The Executive Summary of the plan was submitted to the Washington State Department of Ecology (Ecology) in September 1992. The plan, Executive Summary, and the progress reports are elements of a pollution prevention planning program that is required by WAC 173-307,`Plans,` for all hazardous substance users and/or all hazardous waste generators regulated by Ecology. These regulations implement RCW 70.95C, `Waste Reduction,` an act relating to hazardous waste reduction. The act encourages voluntary efforts to redesign industrial processes to help reduce or eliminate hazardous substances and hazardous waste byproducts, and to maximize the in- process reuse or reclamation of valuable spent material.

  14. Design an effective storm water pollution prevention plan

    International Nuclear Information System (INIS)

    Vivona, M.A.

    1995-01-01

    A case history shows ''how'' to plan and organize a storm water pollution prevention program (SWPPP). Using easy-to-use worksheets and guidelines, hydrocarbon processing industry (HPI) operators can build upon existing best management practices (i.e., housekeeping procedures, visual inspections, spill prevention programs, etc.) to meet tighter restrictions set by National Pollutant Discharge Elimination system (NPDES) permits. Especially in high rainfall areas, storm water poses an intermittent, but large volume problem. The facility's site size is another factor that impacts the scope and cost for SWPPP. The five steps to implementing a SWPPP are: Planning and organization; Assessment; Best management practice (BMP) identification; Implementation; Evaluation and monitoring. Initially, HPI operators must identify all potential contamination sources and past spills and leak areas. Following the SWPP guidelines, operators can map out a cost-effective storm water program that meets all NPDES requirements

  15. Regulatory barriers to pollution prevention: A position paper of the implementation council of the American institute for pollution prevention

    International Nuclear Information System (INIS)

    Byers, R.L.

    1991-01-01

    Pollution prevention/waste minimization is a win-win-win situation for government, industry, and the public, which offers more than just protection of the environment for all. Industry gains from reduced capital and operating costs, reduced liabilities, cleaner and safer working conditions, conservation of energy and material resources, and the opportunity for government and industry to work together in a cooperative manner. However, a number of regulatory barriers exist which discourage pollution prevention/waste minimization. This paper provides examples for the aluminum, chemical, petroleum, and wood treating industries of how these regulatory barriers become disincentives. To promote pollusion prevention/waste minimization, Congress and the US EPA need to reexamine those RCRA provisions which support a command and control strategy that creates the barriers. The barriers include the distinction between value and valueless materials, offsite storage requirements prior to reuse/recycle, the Derived from Rule, the Burning for Fuel Rule, land ban technology standards, and RD and D restrictions. A new RCRA Pollution Prevention/Waste Minimization subtitle is proposed to eliminate or minimize these barriers

  16. The air pollution: sources, effects, prevention

    International Nuclear Information System (INIS)

    Elichegaray, C.

    2008-01-01

    The author offers a detailed and illustrated panorama of the air pollution sources and effects. The study is realized at the individual scale with the indoor pollution and at a global scale with the consequences of the greenhouse effect gases. Added to classical pollutants, the book takes into account new pollutants (organic, nano particulates, biological) and the epidemiology. (A.L.B.)

  17. Annual report of waste generation and pollution prevention progress, 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-01

    This Report summarizes the waste generation and pollution prevention activities of the major operational sites in the Department of Energy (DOE). We are witnessing progress in waste reduction from routine operations that are the focus of Department-wide reduction goals set by the Secretary on May 3,1996. The goals require that by the end of 1999, we reduce, recycle, reuse, and otherwise avoid waste generation to achieve a 50 percent reduction over 1993 levels. This Report provides the first measure of our progress in waste reduction and recycling against our 1993 waste generation baseline. While we see progress in reducing waste from our normal operations, we must begin to focus attention on waste generated by cleanup and facilities stabilization activities that are the major functions of the Office of Environmental Management. Reducing the generation of waste is one of the seven principles that I have established for the Office of Environmental Management Ten Year Plan. As part of our vision to complete a major portion of the environmental cleanup at DOE sites over the next ten years, we must utilize the potential of the pollution prevention program to reduce the cost of our cleanup program. We have included the Secretarial goals as part of the performance measures for the Ten Year Plan, and we are committed to implementing pollution prevention ideas. Through the efforts of both Federal and contractor employees, our pollution prevention program has reduced waste and the cost of our operations. I applaud their efforts and look forward to reporting further waste reduction progress in the next annual update of this Report.

  18. Annual report of waste generation and pollution prevention progress, 1994

    International Nuclear Information System (INIS)

    1996-09-01

    This Report summarizes the waste generation and pollution prevention activities of the major operational sites in the Department of Energy (DOE). We are witnessing progress in waste reduction from routine operations that are the focus of Department-wide reduction goals set by the Secretary on May 3,1996. The goals require that by the end of 1999, we reduce, recycle, reuse, and otherwise avoid waste generation to achieve a 50 percent reduction over 1993 levels. This Report provides the first measure of our progress in waste reduction and recycling against our 1993 waste generation baseline. While we see progress in reducing waste from our normal operations, we must begin to focus attention on waste generated by cleanup and facilities stabilization activities that are the major functions of the Office of Environmental Management. Reducing the generation of waste is one of the seven principles that I have established for the Office of Environmental Management Ten Year Plan. As part of our vision to complete a major portion of the environmental cleanup at DOE sites over the next ten years, we must utilize the potential of the pollution prevention program to reduce the cost of our cleanup program. We have included the Secretarial goals as part of the performance measures for the Ten Year Plan, and we are committed to implementing pollution prevention ideas. Through the efforts of both Federal and contractor employees, our pollution prevention program has reduced waste and the cost of our operations. I applaud their efforts and look forward to reporting further waste reduction progress in the next annual update of this Report

  19. Westinghouse Hanford Company Pollution Prevention Program Implementation Plan

    International Nuclear Information System (INIS)

    Floyd, B.C.

    1994-10-01

    This plan documents Westinghouse Hanford Company's (WHC) Pollution Prevention (P2) (formerly Waste Minimization) program. The program includes WHC; BCS Richland, Inc. (BCSR); and ICF Kaiser Hanford Company (ICF KH). The plan specifies P2 program activities and schedules for implementing the Hanford Site Waste Minimization and Pollution Prevention Awareness (WMin/P2) Program Plan requirements (DOE 1994a). It is intended to satisfy the U.S. Department of Energy (DOE) and other legal requirements that are discussed in both the Hanford Site WMin/P2 plan and paragraph C of this plan. As such, the Pollution Prevention Awareness Program required by DOE Order 5400.1 (DOE 1988) is included in the WHC P2 program. WHC, BCSR, and ICF KH are committed to implementing an effective P2 program as identified in the Hanford Site WMin/P2 Plan. This plan provides specific information on how the WHC P2 program will develop and implement the goals, activities, and budget needed to accomplish this. The emphasis has been to provide detailed planning of the WHC P2 program activities over the next 3 years. The plan will guide the development and implementation of the program. The plan also provides background information on past program activities. Because the plan contains greater detail than in the past, activity scope and implementation schedules may change as new priorities are identified and new approaches are developed and realized. Some activities will be accelerated, others may be delayed; however, all of the general program elements identified in this plan and contractor requirements identified in the Site WMin/P2 plan will be developed and implemented during the next 3 years. This plan applies to all WHC, BCSR, and ICF KH organizations and subcontractors. It will be distributed to those with defined responsibilities in this plan; and the policy, goals, objectives, and strategy of the program will be communicated to all WHC, BCSR, and ICF KH employees

  20. Annual report of waste generation and pollution prevention progress 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-09-01

    This Annual Report summarizes and highlights waste generation, waste reduction, pollution prevention accomplishments, and cost avoidance for 44 U.S. Department of Energy reporting sites for Calendar Year 1999. This section summarizes Calendar Year 1999 Complex-wide waste generation and pollution prevention accomplishments.

  1. Annual report of waste generation and pollution prevention progress 1999

    International Nuclear Information System (INIS)

    2000-01-01

    This Annual Report summarizes and highlights waste generation, waste reduction, pollution prevention accomplishments, and cost avoidance for 44 U.S. Department of Energy reporting sites for Calendar Year 1999. This section summarizes Calendar Year 1999 Complex-wide waste generation and pollution prevention accomplishments

  2. Information resources for US Department of Energy pollution prevention programs

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, K.L.; Snowden-Swan, L.J.; Butner, R.S.

    1994-01-01

    In support of the US Department of Energy`s (DOE`s) pollution prevention efforts being conducted under the aegis of DOE`s Office of Environmental Restoration and Waste Management (EM) program, Pacific Northwest Laboratory was tasked with evaluating pollution prevention information resources. The goal of this activity was to improve the effectiveness of DOE`s pollution prevention activities through improved information flow, both within the complex, and more specifically, between DOE and other organizations that share similar pollution prevention challenges. This report presents our findings with respect to the role of information collection and dissemination within the complex, opportunities for teaming from successes of the private sector, and specific information needs of the DOE pollution prevention community. These findings were derived from a series of interviews with pollution prevention coordinators from across the DOE complex, review of DOE site and facility pollution prevention plans, and workshops with DOE information users as well as an information resources workshop that brought together information specialists from private industry, non-profit organizations, as well as state and regional pollution prevention assistance programs.

  3. 46 CFR 184.702 - Pollution prevention equipment and procedures.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Pollution prevention equipment and procedures. 184.702 Section 184.702 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS... Pollution prevention equipment and procedures. A vessel must comply with the applicable design, equipment...

  4. 46 CFR 121.702 - Pollution prevention equipment and procedures.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Pollution prevention equipment and procedures. 121.702 Section 121.702 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SMALL PASSENGER VESSELS... CONTROL AND MISCELLANEOUS SYSTEMS AND EQUIPMENT Miscellaneous § 121.702 Pollution prevention equipment and...

  5. 75 FR 45572 - Oil Pollution Prevention; Spill Prevention, Control, and Countermeasure (SPCC) Rule-Proposed...

    Science.gov (United States)

    2010-08-03

    ... Oil Pollution Prevention; Spill Prevention, Control, and Countermeasure (SPCC) Rule--Proposed... Federal Regulations is proposed to be amended as follows: PART 112--OIL POLLUTION PREVENTION 1. The... certain facilities must prepare or amend their Spill Prevention, Control, and Countermeasure (SPCC) Plans...

  6. 76 FR 64296 - Oil Pollution Prevention; Spill Prevention, Control, and Countermeasure (SPCC) Rule-Compliance...

    Science.gov (United States)

    2011-10-18

    ... Oil Pollution Prevention; Spill Prevention, Control, and Countermeasure (SPCC) Rule--Compliance Date... Federal Register. List of Subjects in 40 CFR Part 112 Oil pollution prevention, Farms, Compliance date... proposing to amend the date by which farms must prepare or amend, and implement their Spill Prevention...

  7. Application of environmental accounting to pollution prevention assessments

    International Nuclear Information System (INIS)

    Del Mar, R.A.

    1997-08-01

    Environmental accounting represents a major paradigm shift in the way most companies account for costs and benefits. However, it is a change that must be made if pollution prevention is to become institutionalized into the corporate and government mainstream. Pollution prevention investments must be justified on an economic basis; without environmental accounting tools, pollution prevention investments cannot show their true profitability. This is because traditional accounting methods only track billable costs, thus ignoring some of the major benefits of pollution prevention investments, which are indirect savings resulting from a lessening of a company's regulatory compliance burden and present and future liabilities. This paper discusses how to apply environmental accounting principles to pollution prevention assessments to improve the outcome of profitability analyses

  8. Pollution prevention opportunity assessment approach, training, and technical assistance for DOE contractors. FY 1995 report

    Energy Technology Data Exchange (ETDEWEB)

    Pemberton, S.

    1996-02-01

    The Department of Energy and its contractors are faced with environmental concerns and large waste management costs. Federal legislation and DOE Orders require sites to develop waste minimization/pollution prevention programs. In response to these requirements, the Kansas City Plant developed a pollution prevention tool called a pollution prevention opportunity assessment (PPOA). Pilot assessments resulted in the development of a graded approach to reduce the amount of effort required for activities that utilized nonhazardous and/or low-volume waste streams. The project`s objectives in FY95 were to validate DOE`s PPOA Graded Approach methodology, provide PPOA training and technical assistance to interested DOE personnel and DOE contractors, enhance the methodology with energy analysis and tools for environmental restoration activities, implement a DOE-wide PPOA database, and provide support to DOE EM-334 in the completion of a report which estimates the future potential for pollution prevention and waste minimization in the DOE complex.

  9. Pollution prevention opportunity assessment approach, training, and technical assistance for DOE contractors. FY 1995 report

    International Nuclear Information System (INIS)

    Pemberton, S.

    1996-02-01

    The Department of Energy and its contractors are faced with environmental concerns and large waste management costs. Federal legislation and DOE Orders require sites to develop waste minimization/pollution prevention programs. In response to these requirements, the Kansas City Plant developed a pollution prevention tool called a pollution prevention opportunity assessment (PPOA). Pilot assessments resulted in the development of a graded approach to reduce the amount of effort required for activities that utilized nonhazardous and/or low-volume waste streams. The project's objectives in FY95 were to validate DOE's PPOA Graded Approach methodology, provide PPOA training and technical assistance to interested DOE personnel and DOE contractors, enhance the methodology with energy analysis and tools for environmental restoration activities, implement a DOE-wide PPOA database, and provide support to DOE EM-334 in the completion of a report which estimates the future potential for pollution prevention and waste minimization in the DOE complex

  10. Pollution prevention initiatives at US EPA: 'Green Lights'

    International Nuclear Information System (INIS)

    Lawson, J.; Kwartin, R.

    1991-01-01

    US EPA is initiating a pollution prevention approach to supplement its historic command-control, regulatory approach to environmental protection. EPA believes polllution prevention, where applicable and possible, represents a quicker, less expensive and even profitable strategy for environmental protection. Most clearly, energy-efficiency provides an opportunity to prevent significant amounts of pollution related to the inefficeint generation and use of electricity. EPA's first energy productivity and pollution prevention program is Green Lights. Beyond its own merits, Green Lights will also provide important experience to EPA as it develops its Green Machines program to accelerate the market for efficient appliances and equipment

  11. RESEARCH AREA -- ARTIFICIAL INTELLIGENCE CONTROL (AIR POLLUTION TECHNOLOGY BRANCH, AIR POLLUTION PREVENTION AND CONTROL DIVISION, NRMRL)

    Science.gov (United States)

    The Air Pollution Technology Branch (APTB) of NRMRL's Air Pollution Prevention and Control Division in Research Triangle Park, NC, has conducted several research projects for evaluating the use of artificial intelligence (AI) to improve the control of pollution control systems an...

  12. Hanford Site Pollution Prevention Plan Progress report, 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    This report tracks progress against the goals stated in the Hanford Site 5-year Pollution Prevention Plan. The executive summary of the plan was submitted to the Washington State Department of Ecology (Ecology) in September 1992. The plan, executive summary, and the progress reports are elements of a pollution prevention planning program that is required by Washington Administrative Code (WAC) 173-307 for all hazardous substance users and/or all hazardous waste generators regulated by Ecology. These regulations implement Chapter 70.95C, Revised Code of Washington, an act relating to hazardous waste reduction. The act encourages voluntary efforts to redesign industrial processes to help reduce or eliminate hazardous substances and hazardous waste byproducts, and to maximize the inprocess reuse or reclamation of valuable spent material. Although the Hanford Site is exempt, it is voluntarily complying with this state regulatory-mandated program. This is the first year the Hanford Site is submitting a progress report. It covers calendar year 1993 plus the last quarter of 1992. What is reported, in accordance with WAC 173-307, are reductions in hazardous substance use and hazardous waste generated. A system of Process Waste Assessments (PWA) was chosen to meet the requirements of the program. The PWAs were organized by a physical facility or company organization. Each waste-generating facility/organization performed PWAs to identify, screen, and analyze their own reduction options. Each completed PWA identified any number of reduction opportunities, that are listed individually in the plan and summarized by category in the executive summary. These opportunities were to be implemented or evaluated further over the duration of the 5-year plan. The basis of this progress report is to track action taken on these PWA reduction opportunities in relationship to achieving the goals stated in the Pollution Prevention Plan.

  13. Hanford Site Pollution Prevention Plan Progress report, 1993

    International Nuclear Information System (INIS)

    1994-08-01

    This report tracks progress against the goals stated in the Hanford Site 5-year Pollution Prevention Plan. The executive summary of the plan was submitted to the Washington State Department of Ecology (Ecology) in September 1992. The plan, executive summary, and the progress reports are elements of a pollution prevention planning program that is required by Washington Administrative Code (WAC) 173-307 for all hazardous substance users and/or all hazardous waste generators regulated by Ecology. These regulations implement Chapter 70.95C, Revised Code of Washington, an act relating to hazardous waste reduction. The act encourages voluntary efforts to redesign industrial processes to help reduce or eliminate hazardous substances and hazardous waste byproducts, and to maximize the inprocess reuse or reclamation of valuable spent material. Although the Hanford Site is exempt, it is voluntarily complying with this state regulatory-mandated program. This is the first year the Hanford Site is submitting a progress report. It covers calendar year 1993 plus the last quarter of 1992. What is reported, in accordance with WAC 173-307, are reductions in hazardous substance use and hazardous waste generated. A system of Process Waste Assessments (PWA) was chosen to meet the requirements of the program. The PWAs were organized by a physical facility or company organization. Each waste-generating facility/organization performed PWAs to identify, screen, and analyze their own reduction options. Each completed PWA identified any number of reduction opportunities, that are listed individually in the plan and summarized by category in the executive summary. These opportunities were to be implemented or evaluated further over the duration of the 5-year plan. The basis of this progress report is to track action taken on these PWA reduction opportunities in relationship to achieving the goals stated in the Pollution Prevention Plan

  14. Hanford Site guide for preparing and maintaining generator group pollution prevention program documentation

    International Nuclear Information System (INIS)

    Place, B.G.

    1998-01-01

    This document provides guidance to generator groups for preparing and maintaining documentation of Pollution Prevention Waste Minimization (P2/WMin) Program activities. The guidance is one of a hierarchical series that includes the Hanford Site Waste Minimization and Pollution Prevention Awareness Program Plan (DOE-RL, 1998a) and Prime contractor implementation plans describing programs required by Resource Conservation and Recovery Act of 1976 (RCRA) 3002(b) and 3005(h) (RCRA and EPA, 1994). Documentation guidance for the following five P2/WMin elements are discussed: Fiscal Year (FY) Goals; Budget and Staffing; Waste Minimization (WMin) Assessments (WMAs); Quarterly Pollution Prevention (P2) Reporting WMin Certification

  15. Hanford Site Guide for Preparing and Maintaining Fenerator Group Pollution Prevention Program Documentation

    International Nuclear Information System (INIS)

    PLACE, B.G.

    1999-01-01

    This document provides guidance to generator groups for preparing and maintaining documentation of Pollution Prevention/Waste Minimization (P2/WMin) Program activities. The guidance is one of a hierarchical series that includes the Hanford Site Waste Minimization and Pollution Prevention Awareness Program Plan (DOE-RL, 1998a) and Prime Contractor implementation plans describing programs required by Resource Conservation and Recovery Act of 1976 (RCRA) 3002(b) and (300501) (RCRA and EPA, 1994). Documentation guidance for the following five P2/WMin elements are discussed: Fiscal Year (FY) Goals; Budget and Staffing; Waste Minimization (WMinn ) Assessments (WMAs); Pollution Prevention (P2) Reporting; WMin Certification

  16. Developing the strategic plan for pollution prevention in defense programs

    International Nuclear Information System (INIS)

    Marchetti, John A.; Betschart, James F.; Suffern, J. Samuel

    1992-01-01

    In order to provide effective leadership and to ensure a consistent pollution prevention effort in all of its production facilities and laboratories, Defense Programs (DP) Headquarters, in close cooperation with the Field, has developed a strategic plan for its Pollution Prevention Program. The strategic plan is built upon the history of waste minimization, waste reduction, and pollution prevention activity to date, and articulates both long- and short-term strategies to ensure program initiation, growth, and stability. The organization of the program, including Headquarters staffing and linkages to the Geld, is described. Life-cycle analysis of program barriers and bottlenecks, along with associated initiatives and action plans are discussed. (author)

  17. Pollution Prevention Programs in Your Community.

    Science.gov (United States)

    Stenstrup, Al

    1995-01-01

    Provides details of an activity in which students in grades 5-12 study businesses in their community to discover what efforts are being made to reduce pollution. Integrates science and social studies content. (DDR)

  18. Design strategies for pollution prevention in industries (life cycle design)

    International Nuclear Information System (INIS)

    Saleemi, A.R.

    1997-01-01

    Pollution prevention and adoption of clean technologies in the industry are to be the proper strategies to flight against the growing industrial pollution in Pakistan. These strategies will not only reduce the existing pollution load and will also help to have sustainable industrial development in Pakistan in is well established that the concept of pollution prevention demands use of minimum, resources with maximum efficiency to achieve double benefits such as resource conservation and environmental protection. The application of cleaner production and waste minimization in thousand of industries in other part of world has proved beyond doubt that the use of cleaner technology is cheaper as compared to installation of waste treatment plants for end of pipe treatment. Waste treatment plants have been blamed not to solve any pollution problem, but only to transfer pollution from one environmental media to another. The adoption of waste treatment technologies have also created lot of other problems. Thousand of industries in the world have change their focus of activities from end of pipe treatment to pollution prevention techniques. It is the right time to start pollution prevention activities in industry. The design of a product system in the industry can be represented logically as a series of decision and choices made individually and collectively by design participant. The choices range from the selection of materials and manufacturing processes to choices relating to shape, from and function of a product. The product life cycle design provides a logical system for addressing pollution prevention because the full range of environmental consequence associated with the product can be considered and it is a powerful tool for identifying and maximizing the environmental benefits of pollution prevention. The life cycle assesment (LCA) concept suggests that decision making should be based on consideration of the cradle-to grave characteristics of the product, process

  19. Pollution prevention and industrial transformation; Evoking structural changes within companies

    NARCIS (Netherlands)

    de Bruijn, Theo; Hofman, Peter

    2000-01-01

    Pollution prevention has developed as an attractive method for improving the environmental performance of companies. Often the concept is promoted in a project format, for instance in a regional perspective or for a specific sector of industry. This article analyzes the contribution of pollution

  20. POLLUTION PREVENTION OPPORTUNITY ASSESSMENT - GEOCHEMISTRY LABORATORY AT SANDIA NATIONAL LABORATORIES

    Science.gov (United States)

    These reports summarize pollution prevention opportunity assessments conducted jointly by EPA and DOE at the Geochemistry Laboratory and the Manufacturing and Fabrication Repair Laboratory at the Department of Energy's Sandia National Laboratories facility in Albuquerque, New Mex...

  1. An Innovative Partnership Approach for Environmental Management and Pollution Prevention.

    Science.gov (United States)

    Erten-Unal, Mujde; Aydlett, Guy M.

    1997-01-01

    A partnership between a university and a government regulatory agency sought to assist industries with pollution prevention and waste management. Economic incentives were developed to promote waste minimization. (SK)

  2. Hanford Site waste minimization and pollution prevention awareness program plan

    International Nuclear Information System (INIS)

    1994-05-01

    The Hanford Site WMin/P2 program is an organized, comprehensive, and continual effort to systematically reduce the quantity and toxicity of hazardous, radioactive, mixed, and sanitary wastes; conserve resources; and prevent or minimize pollutant releases to all environmental media from all Site activities. The Hanford Site WMin/P2 program plan reflects national and DOE waste minimization and pollution prevention goals and policies, and represents an ongoing effort to make WMin/P2 part of the Site operating philosophy. In accordance with these policies, a hierarchical approach to environmental management has been adopted and is applied to all types of polluting and waste generating activities. Pollution prevention and waste minimization through source reduction are first priority in the Hanford WMin/P2 program, followed by environmentally safe recycling. Treatment to reduce the quantity, toxicity, and/or mobility will be considered only when prevention or recycling are not possible or practical. Environmentally safe disposal is the last option

  3. Integrated pollution prevention and control scares industrial companies

    International Nuclear Information System (INIS)

    Zackova, K.; Sobinkovic, B.

    2003-01-01

    It will not be easy to obtain a permit to open a new industrial plant. And not only the new ones but all important operating industrial productions will require a so called integrated permit. Both authorities and company managers consider the validation process to be more demanding compared to the current procedure for obtaining a building or user permit. As of August 1, 2003 - the day a new Act on Integrated Pollution Prevention and Control (IPPC) is expected to enter into force - only integrated permits will be given. The related bill has been passed to the parliament for the second reading. As of end of April next year the future of 31 industrial plants will depend on whether they will be granted a integrated permit or not. IPPC is a terror for companies due to its seriousness, complexity and the relatively short time given, should they not manage to obtain a permit the plant may be closed down. The European Commission (EC) Directive 96/61/EC Integrated Pollution Prevention and Control raises the same concerns among companies in European Union (EU) member states. It is one of the most strict environmental standards and one of the sensitive conditions of EU entry. That is one of the reasons transition periods for this Directive were negotiated for ten Slovak companies. (Authors)

  4. Hanford Site Pollution Prevention Plan progress report, 1994. Revision 1

    International Nuclear Information System (INIS)

    1995-09-01

    This report tracks progress made during 1994 against the goals stated in DOE/RL-92-62, Executive Summary, Hanford Site Pollution Prevention Plan. The Executive Summary of the plan was submitted to the Washington State Department of Ecology (Ecology) in September 1992. The plan, Executive Summary, and the progress reports are elements of a pollution prevention planning program that is required by WAC 173-307, ''Plans,'' for all hazardous substance users and/or all hazardous waste generators regulated by Ecology. These regulations implement RCW 70.95C, ''Waste Reduction,'' an act relating to hazardous waste reduction. The act encourages voluntary efforts to redesign industrial processes to help reduce or eliminate hazardous substances and hazardous waste byproducts, and to maximize the in-process reuse or reclamation of valuable spent material. The Hanford Site is voluntarily complying with this state regulatory-mandated program. All treatment, storage, or disposal (TSD) facilities are exempt from participating; the Hanford Site is classified as a TSD

  5. Hanford Site Pollution Prevention Plan progress report, 1994. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    This report tracks progress made during 1994 against the goals stated in DOE/RL-92-62, Executive Summary, Hanford Site Pollution Prevention Plan. The Executive Summary of the plan was submitted to the Washington State Department of Ecology (Ecology) in September 1992. The plan, Executive Summary, and the progress reports are elements of a pollution prevention planning program that is required by WAC 173-307, ``Plans,`` for all hazardous substance users and/or all hazardous waste generators regulated by Ecology. These regulations implement RCW 70.95C, ``Waste Reduction,`` an act relating to hazardous waste reduction. The act encourages voluntary efforts to redesign industrial processes to help reduce or eliminate hazardous substances and hazardous waste byproducts, and to maximize the in-process reuse or reclamation of valuable spent material. The Hanford Site is voluntarily complying with this state regulatory-mandated program. All treatment, storage, or disposal (TSD) facilities are exempt from participating; the Hanford Site is classified as a TSD.

  6. Chemicals and excess materials disposition during deactivation as a means of pollution prevention

    International Nuclear Information System (INIS)

    Godfrey, S.D.

    1998-01-01

    This paper presents several innovative and common sense approaches to pollution prevention that have been employed during facility deactivation at the Hanford Site in South Central Washington. It also presents several pollution prevention principles applicable to other projects. Innovative pollution prevention ideas employed at the Hanford site during facility deactivation included: (1) Recycling more than 185,000 gallons of radioactively contaminated nitric acid by sending it to an operating nuclear fuels reprocessing facility in England; (2) Recycling millions of pounds of chemicals and excess materials to other industries for reuse; (3) Evaporating flush water at a low rate and discharging it into the facility exhaust air stream to avoid discharging thousands of gallons of liquid to the soil column; and (4) Decontaminating and disposing of thousands of gallons of radioactively contaminated organic solvent waste to a RCRA licensed, power-producing, commercial incinerator. Common sense pollution prevention ideas that were employed include recycling office furniture, recycling paper from office files, and redeploying tools and miscellaneous process equipment. Additional pollution prevention occurred as the facility liquid and gaseous discharge streams were deactivated. From the facilities deactivation experiences at Hanford and the ensuing efforts to disposition excess chemicals and materials, several key pollution prevention principles should be considered at other projects and facilities, especially during the operational periods of the facility's mission. These principles include: Institute pollution prevention as a fundamental requirement early in the planning stage of a project or during the operational phase of a facility's mission; Promote recognition and implementation of pollution prevention initiatives; Instill pollution prevention as a value in all participants in the project or facility work scope; Minimize the amount of chemical products and materials

  7. Sandia National Laboratories, California Pollution Prevention Program annual report.

    Energy Technology Data Exchange (ETDEWEB)

    Harris, Janet S.; Farren, Laurie J.

    2010-03-01

    The annual program report provides detailed information about all aspects of the SNL/CA Pollution Prevention Program for a given calendar year. It functions as supporting documentation to the SNL/CA Environmental Management System Program Manual. The program report describes the activities undertaken during the past year, and activities planned in future years to implement the Pollution Prevention Program, one of six programs that supports environmental management at SNL/CA.

  8. Pollution Prevention Information Network (PPIN) Grant Summaries for 2011 and 2013

    Science.gov (United States)

    The Office of Pollution Prevention and Toxics is responsible for overseeing several grant programs for tribes and states which promote pollution prevention through source reduction and resource conservation.

  9. Atmospheric Pollution: Its Origins and Prevention.

    Science.gov (United States)

    Meetham, A. R.

    Although atmospheric pollution can be reduced or eliminated in many different ways, each way involves questions of economics, the time factor, availability of materials, priority over other urgent reforms, and individual and social psychology. To provide a basis for consideration of these questions, this book gives information not only about the…

  10. 75 FR 63093 - Oil Pollution Prevention; Spill Prevention, Control, and Countermeasure (SPCC) Rule-Compliance...

    Science.gov (United States)

    2010-10-14

    ... Oil Pollution Prevention; Spill Prevention, Control, and Countermeasure (SPCC) Rule--Compliance Date... certain facilities must prepare or amend their Spill Prevention, Control, and Countermeasure (SPCC) Plans... facilities must prepare or amend their Spill Prevention, Control, and Countermeasure (SPCC) Plans (or ``Plan...

  11. Stormwater Pollution Prevention Plan - TA-60 Asphalt Batch Plant

    Energy Technology Data Exchange (ETDEWEB)

    Sandoval, Leonard Frank [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2018-01-31

    This Storm Water Pollution Prevention Plan (SWPPP) was developed in accordance with the provisions of the Clean Water Act (33 U.S.C. §§1251 et seq., as amended), and the Multi-Sector General Permit for Storm Water Discharges Associated with Industrial Activity (U.S. EPA, June 2015) issued by the U.S. Environmental Protection Agency (EPA) for the National Pollutant Discharge Elimination System (NPDES) and using the industry specific permit requirements for Sector P-Land Transportation and Warehousing as a guide. This SWPPP applies to discharges of stormwater from the operational areas of the TA-60-01 Asphalt Batch Plant at Los Alamos National Laboratory. Los Alamos National Laboratory (also referred to as LANL or the “Laboratory”) is owned by the Department of Energy (DOE), and is operated by Los Alamos National Security, LLC (LANS). Throughout this document, the term “facility” refers to the TA-60 Asphalt Batch Plant and associated areas. The current permit expires at midnight on June 4, 2020.

  12. Stormwater Pollution Prevention Plan - TA-60 Material Recycling Facility

    Energy Technology Data Exchange (ETDEWEB)

    Sandoval, Leonard Frank [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2018-01-31

    This Storm Water Pollution Prevention Plan (SWPPP) was developed in accordance with the provisions of the Clean Water Act (33 U.S.C. §§1251 et seq., as amended), and the Multi-Sector General Permit for Storm Water Discharges Associated with Industrial Activity (U.S. EPA, June 2015) issued by the U.S. Environmental Protection Agency (EPA) for the National Pollutant Discharge Elimination System (NPDES) and using the industry specific permit requirements for Sector P-Land Transportation and Warehousing as a guide. This SWPPP applies to discharges of stormwater from the operational areas of the TA- 60 Material Recycling Facility at Los Alamos National Laboratory. Los Alamos National Laboratory (also referred to as LANL or the “Laboratory”) is owned by the Department of Energy (DOE), and is operated by Los Alamos National Security, LLC (LANS). Throughout this document, the term “facility” refers to the TA-60 Material Recycling Facility. The current permit expires at midnight on June 4, 2020.

  13. Web-based expert system for foundry pollution prevention

    Science.gov (United States)

    Moynihan, Gary P.

    2004-02-01

    Pollution prevention is a complex task. Many small foundries lack the in-house expertise to perform these tasks. Expert systems are a type of computer information system that incorporates artificial intelligence. As noted in the literature, they provide a means of automating specialized expertise. This approach may be further leveraged by implementing the expert system on the internet (or world-wide web). This will allow distribution of the expertise to a variety of geographically-dispersed foundries. The purpose of this research is to develop a prototype web-based expert system to support pollution prevention for the foundry industry. The prototype system identifies potential emissions for a specified process, and also provides recommendations for the prevention of these contaminants. The system is viewed as an initial step toward assisting the foundry industry in better meeting government pollution regulations, as well as improving operating efficiencies within these companies.

  14. Pollution prevention program for new projects -- Lessons learned

    Energy Technology Data Exchange (ETDEWEB)

    Lum, J. [Dept. of Energy, Washington, DC (United States)

    1993-03-01

    The purpose of this presentation is to relay the experience of the Office of New Production Reactors (NP) in developing and implementing its pollution prevention program. NP was established to plan, design, and construct a new safe and environmentally acceptable nuclear reactor capacity necessary to provide an assured supply of tritium to maintain the nation`s long-term deterrent capability. The Program offered the Department of Energy an opportunity to demonstrate its commitment to environmental protection via minimization of environmental releases; new design offers the best opportunity for pollution prevention. The NP pollution prevention program was never fully implemented because NP`s tritium production design activity was recovery terminated. The information in this paper represented lessons learned from the last three years of NP operation.

  15. Preventing pollution from US Navy ships

    International Nuclear Information System (INIS)

    Bentley, R.; Edgar, V.E.

    1999-01-01

    In executing its military mission, the United States Navy is required to be 'on station' for extended periods of time. The demands of a sustained military presence pose a serious dilemma in meeting international environmental mandates. On one hand, the Navy must conduct protracted peacetime operations in a relatively confined area in order to fulfill military needs in support of national interests. Yet, on the other hand, naval operations in that area may be constrained by requirements to refrain from disposing of solid waste in order to be in compliance with foreign laws and international treaties

  16. Report: Pollution Prevention: Effectiveness of EPA’s Efforts to Encourage Purchase of Recycled Goods Has Not Been Demonstrated

    Science.gov (United States)

    Report #2003-P-00013, Sept 22, 2003. In an effort to prevent pollution and conserve natural resources and virgin materials, Congress requires that the Federal Government’s purchasing power be used to steer materials away from disposal toward recycling.

  17. Pollution prevention and waste minimization opportunity assessment in environmental restoration

    International Nuclear Information System (INIS)

    Roybal, J.A.; Willison, C.P.

    1997-01-01

    The Environmental Restoration (ER) Project at Sandia National Laboratories implicitly subscribed to the philosophy of pollution prevention and waste minimization. As a result of a Department of Energy (DOE) offer, Pollution Prevention Opportunity Assessments (PPOA) were conducted at two ER sites and a decontamination and Demolition (D and D) site. The purpose of one of the PPOAs was to identify pollution prevention (P2) opportunities during environmental remediation at the Classified Waste Landfill located at Sandia National Laboratories, New Mexico (SNL/NM). The remediation activities at this site are scheduled to begin in the fall of 1997. The PPOA included presentations by the team members, a tour of the site, and a brainstorming session to list the waste streams, identify P2 opportunities and rank them in order of priority. Twenty-five P2 opportunities were identified during the brainstorming session of which twenty-two opportunities were selected for further investigation. Those twenty-two opportunities are discussed in this paper. A cost benefit analysis was performed for each P2 opportunity based on the estimated waste volume, feasibility, and cost. Pollution Prevention by Design (P2D) was incorporated into the PPOA to introduce waste minimization techniques that can be used during the planning phase of restoration projects

  18. Governance by Green Taxes: Making Pollution Prevention Pay

    DEFF Research Database (Denmark)

    Andersen, Mikael Skou

    a comparative study of the water policies of Denmark, France, Germany and the Netherlands, he shows how, in contrast to administrative regulation, green taxes have made pollution prevention pay and promoted the "ecological modernization" of industry. He goes on, however, to challenge the prevailing orthodoxy...

  19. Joint Group on Pollution Prevention: Partnering for Progress

    Science.gov (United States)

    Hill, R.

    2001-01-01

    This viewgraph presentation outlines the Joint Group on Pollution Prevention (JG-PP) partnership. Details are given on what groups comprise JG-PP, the proven methodology for what JG-PP can accomplish, the common problems, joint solutions, and shared efforts, and some of the JG-PP projects.

  20. Hanford site guide for preparing and maintaining generator group pollution prevention program documentation

    International Nuclear Information System (INIS)

    1995-12-01

    This manual provides the necessary guidance to contractor generator groups for developing and maintaining documentation of their pollution prevention (P2) program activities. Preparation of program documentation will demonstrate compliance with contractor and U.S. Department of Energy (DOE) requirements, as well as state and federal regulations. Contractor waste generator groups are no longer required to prepare and update facility waste minimization plans. Developing and maintaining program documentation replace this requirement

  1. 40 CFR Appendix L to Part 51 - Example Regulations for Prevention of Air Pollution Emergency Episodes

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 2 2010-07-01 2010-07-01 false Example Regulations for Prevention of Air Pollution Emergency Episodes L Appendix L to Part 51 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS REQUIREMENTS FOR PREPARATION, ADOPTION, AND SUBMITTAL OF IMPLEMENTATION PLANS Pt. 51, App. L Appendix L to Par...

  2. Environmental Restoration Program waste minimization and pollution prevention self-assessment

    International Nuclear Information System (INIS)

    1994-10-01

    The Environmental Restoration (ER) Program within Martin Marietta Energy Systems, Inc. is currently developing a more active waste minimization and pollution prevention program. To determine areas of programmatic improvements within the ER Waste Minimization and Pollution Prevention Awareness Program, the ER Program required an evaluation of the program across the Oak Ridge K-25 Site, the Oak Ridge National Laboratory, the Oak Ridge Y-12 Plant, the Paducah Environmental Restoration and Waste Minimization Site, and the Portsmouth Environmental Restoration and Waste Minimization Site. This document presents the status of the overall program as of fourth quarter FY 1994, presents pollution prevention cost avoidance data associated with FY 1994 activities, and identifies areas for improvement. Results of this assessment indicate that the ER Waste Minimization and Pollution Prevention Awareness Program is firmly established and is developing rapidly. Several procedural goals were met in FY 1994 and many of the sites implemented ER waste minimization options. Additional growth is needed, however, for the ER Waste Minimization and Pollution Prevention Awareness Program

  3. Hanford Site Guide for Preparing and Maintaining Generator Group Pollution Prevention Documentation

    International Nuclear Information System (INIS)

    PLACE, B.G.

    2000-01-01

    This document provides guidance to generator groups for preparing and maintaining documentation of Pollution Prevention/Waste Minimization (P2/WMin) Program activities. The guidance is one of a hierarchical series that includes the Hanford Site Waste Minimization and Pollution Prevention Awareness Program Plan (DOE-RL, 2000) and Prime Contractor implementation plans describing programs required by Resource Conservation and Recovery Act of 1976 (RCRA) 3002(b) and 3005(h) (RCRA and EPA, 1994) and Department of Energy Acquisition Regulations (DEAR) (48 CFR 970.5204-2 and 48 CFR 970.5204-78). Documentation guidance for the following five P2/WMin elements is discussed: Fiscal Year (FY) Goals; Budget and Staffing; Pollution Prevention (P2) Reporting; WMin Certification; and Waste Minimization (WMin) Assessments (WMAs)

  4. Drainage treatment technology for water pollution prevention

    Energy Technology Data Exchange (ETDEWEB)

    Ebise, Sen' ichi

    1988-03-01

    Drainage is purified either at terminal treatment plants or by septic tanks for sewage. At terminal treatment plants, sewage is purified by activated sludge prosessing or by biological treatment equipment. By the normal activated sludge processing, only 20 - 30 % of nitrogen and phosphur can be removed. To solve this problem, many advanced processing systems have been employed, representative systems being coagulating sedimentation, rapid filtration, recirculating nitro-denitrification, etc. The coagulating sedimentation is a treatment process in which such metallic salt coagulations as aluminum, iron, etc. are injected and mixed with sewage, and then phosphur and the like are sedimented in the form of grains. The rapid filtration requires no large space, and can reliably remove suspended matter. For large scale septic tank processing system, advance treatment processing is supplemented to improve the quality of treated water. Among other systems of sewage purification are oxidized channel, oxidized pond, soil treatment, etc. (2 figs, 2 refs)

  5. Waste Minimization/Pollution Prevention Crosscut Plan, 1994

    International Nuclear Information System (INIS)

    1994-01-01

    This plan establishes a Department-wide goal to reduce total releases of toxic chemicals to the environment and off-site transfers of such toxic chemicals by 50 percent by December 31, 1999, in compliance with Executive Order 12856. Each site that meets the threshold quantities of toxic chemicals established in the Emergency Planning and Community Right-to-Know Act (EPCRA) will participate in this goal. In addition, each DOE site will establish site-specific goals to reduce generation of hazardous, radioactive, radioactive mixed, and sanitary wastes and pollutants, as applicable. Implementation of this plan will represent a major step toward the environmental risks and costs associated with DOE operations and increasing the Department's use of preventive environmental management practices. Investing in Waste Minimization Pollution Prevention (WMin/PP) steadily reduce hazardous and radioactive waste generation and will reduce the need for waste management and unnecessary expenditures for waste treatment, storage, and disposal. A preventive approach to waste management will help solve current environmental and regulatory issues and reduce the need for costly future corrective actions. The purpose of this plan is to establish the strategic framework for integrating WMin/PP into all DOE internal activities. This program includes setting DOE policy and goals for reducing the generation of wastes and pollutants, increasing recycling activities, and establishing an infrastructure to achieve and measure the goals throughout the DOE complex. Waste Minimization and Pollution Prevention Awareness Plans, submitted to Headquarters by DOE field sites, will incorporate the WMin/PP activities and goals outlined in this plan. Success of the DOE WMin/PP program is dependent upon each field operation becoming accountable for resources used, wastes and pollutants generated, and wastes recycled

  6. 40 CFR 112.11 - Spill Prevention, Control, and Countermeasure Plan requirements for offshore oil drilling...

    Science.gov (United States)

    2010-07-01

    ... POLLUTION PREVENTION Requirements for Petroleum Oils and Non-Petroleum Oils, Except Animal Fats and Oils and Greases, and Fish and Marine Mammal Oils; and Vegetable Oils (Including Oils from Seeds, Nuts, Fruits, and... equipped with dump valves which predominantly fail in the closed position and where pollution risk is high...

  7. Pollution Prevention Opportunity Assessment for the SNL/NM cafeterias.

    Energy Technology Data Exchange (ETDEWEB)

    McCord, Samuel Adam

    2005-12-01

    This Pollution Prevention Opportunity Assessment (PPOA) was conducted for the two Sandia National Laboratories/New Mexico cafeteria facilities between May and August 2005. The primary purpose of this PPOA is to assess waste and resource reduction opportunities and issue Pollution Prevention (P2) recommendations for Sandia's food service facilities. This PPOA contains recommendations for energy, water and resource reduction, as well as material substitution based upon environmentally preferable purchasing. Division 3000 has requested the PPOA report as part of the Division's compliance effort to implement the Environmental Management System (EMS) per DOE Order 450.1. This report contains a summary of the information collected and analyses performed with recommended options for implementation. The SNL/NM P2 Group will work with Division 3000 and the respective cafeteria facilities to implement these options.

  8. e-compendium - Air Pollution Prevention in an International and EU Environmental Law Perspective, Summer 2014

    DEFF Research Database (Denmark)

    Steen, Ulla

    2014-01-01

    E-compendium Air Pollution Prevention in an International and EU Environmental Law Perspective, Summer 2014......E-compendium Air Pollution Prevention in an International and EU Environmental Law Perspective, Summer 2014...

  9. DOE pollution prevention in the 21st century. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    1996-12-31

    This CD-ROM contains the proceedings from the DOE Pollution Prevention in the 21st Century Conference XII held July 9-11, 1996. Topics included model facilities, federal and NEPA stakeholders, microchemistry, source 4 solvents and reduction, education and outreach planning, return on investment, energy management, decontamination and decommissioning, planning and regulations, environmental restoration, solid waste, recycling, affirmative procurement in the executive branch, construction and demolition, international and ISO 14000, and poster sessions.

  10. DOE pollution prevention in the 21st century

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    This document presents abstracts of the topics covered in the DOE Pollution Prevention in the 21st Century conference held July 9-11, 1996. These topics include: model facilities; Federal/NEPA/stake- holders; microchemistry; solvents and reduction; education and outreach; return on investments; energy management; decontamination and decommissioning; planning and regulations; environmental restoration; recycling; affirmative procurement in the executive branch; construction and demolition; materials exchange; and ISO 2000.

  11. DOE pollution prevention in the 21st century

    International Nuclear Information System (INIS)

    1996-01-01

    This document presents abstracts of the topics covered in the DOE Pollution Prevention in the 21st Century conference held July 9-11, 1996. These topics include: model facilities; Federal/NEPA/stake- holders; microchemistry; solvents and reduction; education and outreach; return on investments; energy management; decontamination and decommissioning; planning and regulations; environmental restoration; recycling; affirmative procurement in the executive branch; construction and demolition; materials exchange; and ISO 2000

  12. Pollution prevention opportunity assessment benchmarking: Recommendations for Hanford

    Energy Technology Data Exchange (ETDEWEB)

    Engel, J.A.

    1994-05-01

    Pollution Prevention Opportunity Assessments (P2OAs) are an important first step in any pollution prevention program. While P2OAs have been and are being conducted at Hanford, there exists no standard guidance, training, tracking, or systematic approach to identifying and addressing the most important waste streams. The purpose of this paper then is to serve as a guide to the Pollution Prevention group at Westinghouse Hanford in developing and implementing P2OAs at Hanford. By searching the literature and benchmarks other sites and agencies, the best elements from those programs can be incorporated and pitfalls more easily avoided. This search began with the 1988 document that introduces P2OAs (then called Process Waste Assessments, PWAS) by the Environmental Protection Agency. This important document presented the basic framework of P20A features which appeared in almost all later programs. Major Department of Energy programs were also examined, with particular attention to the Defense Programs P20A method of a graded approach, as presented at the Kansas City Plant. The graded approach is a system of conducting P2OAs of varying levels of detail depending on the size and importance of the waste stream. Finally, private industry programs were examined briefly. While all the benchmarked programs had excellent features, it was determined that the size and mission of Hanford precluded lifting any one program for use. Thus, a series of recommendations were made, based on the literature review, in order to begin an extensive program of P2OAs at Hanford. These recommendations are in the areas of: facility Pollution Prevention teams, P20A scope and methodology, guidance documents, training for facilities (and management), technical and informational support, tracking and measuring success, and incentives.

  13. Annual report of waste generation and pollution prevention progress 1995

    International Nuclear Information System (INIS)

    1997-02-01

    This fourth Annual Report presents and analyzes 1995 DOE complex-wide waste generation and pollution prevention activities at 40 reporting sites in 25 States, and trends DOE waste generation from 1991 through 1995. DOE has established a 50% reduction goal (relative to the 1993 baseline) for routine operations radioactive and hazardous waste generation, due by December 31, 1999. Routine operations waste generation decreased 37% from 1994 to 1995, and 43% overall from 1993--1995

  14. DOE pollution prevention in the 21st century. Proceedings

    International Nuclear Information System (INIS)

    1996-01-01

    This CD-ROM contains the proceedings from the DOE Pollution Prevention in the 21st Century Conference XII held July 9-11, 1996. Topics included model facilities, federal and NEPA stakeholders, microchemistry, source 4 solvents and reduction, education and outreach planning, return on investment, energy management, decontamination and decommissioning, planning and regulations, environmental restoration, solid waste, recycling, affirmative procurement in the executive branch, construction and demolition, international and ISO 14000, and poster sessions

  15. Recent developments in the DOE Waste Minimization Pollution Prevention Program

    International Nuclear Information System (INIS)

    Hancock, J.K.

    1993-01-01

    The U.S. Department of Energy (DOE) is involved in a wide variety of research and development, remediation, and production activities at more than 100 sites throughout the United States. The wastes generated cover a diverse spectrum of sanitary, hazardous, and radioactive waste streams, including typical office environments, power generation facilities, laboratories, remediation sites, production facilities, and defense facilities. The DOE's initial waste minimization activities pre-date the Pollution Prevention Act of 1990 and focused on the defense program. Little emphasis was placed on nonproduction activities. In 1991 the Office of Waste Management Operations developed the Waste Minimization Division with the intention of coordinating and expanding the waste minimization pollution prevention approach to the entire complex. The diverse nature of DOE activities has led to several unique problems in addressing the needs of waste minimization and pollution prevention. The first problem is developing a program that addresses the geographical and institutional hurdles that exist; the second is developing a monitoring and reporting mechanism that one can use to assess the overall performance of the program

  16. Storm water pollution prevention plan for the Oak Ridge Y-12 Plant

    International Nuclear Information System (INIS)

    1995-09-01

    The Environmental Protection Agency (EPA) published the final storm water regulation on November 16, 1990. The storm water regulation is included in the National Pollutant Discharge Elimination System (NPDES) regulations. An NPDES permit was issued for the Y-12 Plant on April 28, 1995, and was effective on July 1, 1995. The permit requires that a Storm Water Pollution Prevention Plan (SWP3) be developed by December 28, 1995, and be fully implemented by July 1, 1996; this plan has been developed to fulfill that requirement. The outfalls and monitoring points described in this plan contain storm water discharges associated with industrial activities as defined in the NPDES regulations. For storm water discharges associated with industrial activity, including storm water discharges associated with construction activity, that are not specifically monitored or limited in this permit, Y-12 Plant personnel will meet conditions of the General Storm Water Rule 1200-4-10. This document presents the programs and physical controls that are in place to achieve the following objectives: ensure compliance with Section 1200-4-10-.04(5) of the TDEC Water Quality Control Regulations and Part 4 of the Y-12 Plant NPDES Permit (TN0002968); provide operating personnel with guidance relevant to storm water pollution prevention and control requirements for their facility and/or project; and prevent or reduce pollutant discharge to the environment, in accordance with the Clean Water Act (CWA) and the Tennessee Water Quality Control Act

  17. Storm water pollution prevention plan for the Oak Ridge Y-12 Plant

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The Environmental Protection Agency (EPA) published the final storm water regulation on November 16, 1990. The storm water regulation is included in the National Pollutant Discharge Elimination System (NPDES) regulations. An NPDES permit was issued for the Y-12 Plant on April 28, 1995, and was effective on July 1, 1995. The permit requires that a Storm Water Pollution Prevention Plan (SWP3) be developed by December 28, 1995, and be fully implemented by July 1, 1996; this plan has been developed to fulfill that requirement. The outfalls and monitoring points described in this plan contain storm water discharges associated with industrial activities as defined in the NPDES regulations. For storm water discharges associated with industrial activity, including storm water discharges associated with construction activity, that are not specifically monitored or limited in this permit, Y-12 Plant personnel will meet conditions of the General Storm Water Rule 1200-4-10. This document presents the programs and physical controls that are in place to achieve the following objectives: ensure compliance with Section 1200-4-10-.04(5) of the TDEC Water Quality Control Regulations and Part 4 of the Y-12 Plant NPDES Permit (TN0002968); provide operating personnel with guidance relevant to storm water pollution prevention and control requirements for their facility and/or project; and prevent or reduce pollutant discharge to the environment, in accordance with the Clean Water Act (CWA) and the Tennessee Water Quality Control Act.

  18. 48 CFR 52.223-5 - Pollution Prevention and Right-to-Know Information.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Pollution Prevention and... Provisions and Clauses 52.223-5 Pollution Prevention and Right-to-Know Information. As prescribed in 23.1005, insert the following clause: Pollution Prevention and Right-to-Know Information (AUG 2003) (a...

  19. 77 FR 52341 - Information Collection Activity: Subpart C, Pollution Prevention and Control; Submitted for...

    Science.gov (United States)

    2012-08-29

    ...-0001; OMB Number 1014-NEW] Information Collection Activity: Subpart C, Pollution Prevention and Control... the regulations under Subpart C, Pollution Prevention and Control. This notice also provides the... information. SUPPLEMENTARY INFORMATION: Title: 30 CFR 250, Subpart C, Pollution Prevention and Control. OMB...

  20. 40 CFR Table 8 to Part 455 - List of Pollution Prevention Alternative Practices

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false List of Pollution Prevention... of Pollution Prevention Alternative Practices A modification to the list of practices on this table that an individual facility must comply with to be eligible for the pollution prevention alternative is...

  1. What drives successful implementation of pollution prevention and cleaner technology strategy? The role of innovative capability.

    Science.gov (United States)

    Bhupendra, Kumar Verma; Sangle, Shirish

    2015-05-15

    Firms that are dynamic and prepared to implement environmental strategies have a potential competitive advantage over their industry counterparts. Therefore, it is important to understand, what capabilities are required to implement proactive environmental strategies. The paper discusses the attributes of innovative capability required by firms in order to adopt pollution prevention and cleaner technology strategies. Empirical results show that process and behavioral innovativeness are required by firms to implement a pollution prevention strategy. In addition to process and behavioral innovativeness, firms need a top management with high risk-taking ability as well as market, product, and strategic innovativeness to implement a cleaner technology strategy. The paper proposes some important managerial implications on the basis of the above research findings. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. Assessment of pollution prevention and control technology for plating operations

    Science.gov (United States)

    Chalmer, Paul D.; Sonntag, William A.; Cushnie, George C., Jr.

    1995-01-01

    The National Center for Manufacturing Sciences (NCMS) is sponsoring an on-going project to assess pollution prevention and control technology available to the plating industry and to make this information available to those who can benefit from it. Completed project activities include extensive surveys of the plating industry and vendors of technologies and an indepth literature review. The plating industry survey was performed in cooperation with the National Association of Metal Finishers. The contractor that conducted the surveys and prepared the project products was CAI Engineering. The initial products of the project were made available in April, 1994. These products include an extensive report that presents the results of the surveys and literature review and an electronic database. The project results are useful for all those associated with pollution prevention and control in the plating industry. The results show which treatment, recovery and bath maintenance technologies have been most successful for different plating processes and the costs for purchasing and operating these technologies. The project results also cover trends in chemical substitution, the identification of compliance-problem pollutants, sludge generation rates, off-site sludge recovery and disposal options, and many other pertinent topics.

  3. Prosperity without pollution: The prevention strategy for industry and consumers

    International Nuclear Information System (INIS)

    Hirschhorn, J.S.; Oldenburg, K.V.

    1990-01-01

    Here is the first book to explain why only a preventative environmental strategy can work: because growing population, consumption and industrialization cripple current, rather haphazard, remedial efforts. This book shows how our society can make more with less, be more competitive and less polluting, while maintaining our standard of living by reducing and eventually eliminating the production of wastes and pollutants from industry, commerce, homes, farms, and institutions. This may seem far-fetched, but be prepared to discover in this book that there can be a middle ground between ecology and economy - and that you can help achieve it. You'll find data and examples that any person can use, from engineers in industry to office workers to activists. Every concerned citizen will also want to consider the authors' innovative suggestions for taxing wastes and using the proceeds to help companies and communities switch to new industrial processes. Also, you should evaluate their proposals to reburies meaningful waste and toxicity information on product labels, to make bans on chemicals and products a more credible and available corrective measure, and to secure permanent, high-level government support for pollution prevention

  4. Environmental Restoration Program pollution prevention performance measures for FY 1993 and 1994 remedial investigations

    International Nuclear Information System (INIS)

    1993-03-01

    The Martin Marietta Energy Systems, Inc., Environmental Restoration (ER) Program adopted a Pollution Prevention Program in March 1991. The program's mission is to minimize waste and prevent pollution in remedial investigations (RI), feasibility studies (FS), decontamination and decommissioning (D ampersand D), and surveillance and maintenance (S ampersand M) site program activities. Mission success will result in volume and/or toxicity reduction of generated waste. Energy Systems is producing a fully developed a Numerical Scoring System (NSS) and actually scoring the generators of Investigation Derived Waste (IDW) at six ER sites: Oak Ridge National Laboratory (ORNL), the Oak Ridge Y-12 Plant, the Oak Ridge K-25 site, Paducah Gaseous Diffusion Plant (Paducah), and Portsmouth Uranium Enrichment Complex (Portsmouth). This report summarizes the findings of this initial numerical scoring evaluation and shows where improvements in the overall ER Pollution prevention program may be required. This report identifies a number of recommendations that, if implemented, would help to improve site-performance measures. The continued development of the NSS will support generators in maximizing their Pollution Prevention/Waste Minimization efforts. Further refinements of the NSS, as applicable suggest comments and/or recommendations for improvement

  5. CONSTRUCTED WETLAND TECHNOLOGY TO PREVENT WATER RESOURCES POLLUTION

    Directory of Open Access Journals (Sweden)

    Zeki Gökalp

    2016-07-01

    Full Text Available Discharge of untreated waste waters into surface waters creates significant pollution in these resources. Wastewaters are most of the time discharged into seas, rivers and other water bodies without any treatments due to high treatment costs both in Turkey and throughout the world. Constructed wetlands, also called as natural treatment systems, are used as an alternative treatment system to conventional high-cost treatment systems because of their low construction, operation and maintenance costs, energy demands, easy operation and low sludge generation. Today, constructed wetland systems are largely used to treat domestic wastewaters, agricultural wastewaters, industrial wastewater and runoff waters and ultimately to prevent water pollution and to improve water quality of receiving water bodies. In present study, currently implemented practices in design, construction, operation and maintenance of constructed wetlands were assessed and potential mistakes made in different phases these systems were pointed out and possible solutions were proposed to overcome these problems.

  6. Environmental policies and the pollution prevention principle. Das Vorsorgeprinzip in der Umweltpolitik

    Energy Technology Data Exchange (ETDEWEB)

    Beyer, H M

    1992-01-01

    The pollution prevention principle has become the dominant environmental-policy guideline in the Federal Republic of Germany and in the European Communities. The compatibility of the pollution prevention principle with the dominating ecological-economics theory is analyzed, and the differences between the pollution prevention and the polluter principle as a significant, economically founded guideline are defined on the basis of the results obtained. The implementation of the pollution prevention principle, which is understood as an extensive ecologization of the socio-economic structures, is discussed evaluating the contribution of normative and empirical ethics and investigating three closely related aspects, i.e. the development of a pollution prevention target system, the suitability of environmental-policy instruments with regard to different levels of prevention, and the national and democratic institutional prerequisites. The prospects of the pollution prevention principle within the European Communities are discussed on the basis of these findings. (orig.).

  7. Uranium Mill Tailings remedial action project waste minimization and pollution prevention awareness program plan

    International Nuclear Information System (INIS)

    1994-07-01

    The purpose of this plan is to establish a waste minimization and pollution prevention awareness (WM/PPA) program for the U.S. Department of Energy's (DOE) Uranium Mill Tailings Remedial Action (UMTRA) Project. The program satisfies DOE requirements mandated by DOE Order 5400.1. This plan establishes planning objectives and strategies for conserving resources and reducing the quantity and toxicity of wastes and other environmental releases

  8. Visual Pollution in the Context of Conflicting Design Requirements

    Directory of Open Access Journals (Sweden)

    Sumartono Sumartono

    2009-07-01

    Full Text Available All designs (graphic, product, and interior designs are directed to consider certain requirements which are followed by logical thinking to fulfill a design process. Once the requirements of each design have been well-considered and the logical design process has been fulfilled, the design is complete. Ideally, all designs are not supposed to be in conflict with each other because each one is based on a logical design process. In reality, however, the mutual existence of these designs has produced conflicting requirements and thereby conflicting logics. This conflict can be seen in visual pollution. This paper will examine the impact of visual pollution caused by billboards, street signs, posters, houses/buildings, automobiles, shopfront graphic designs, packaging designs, graffiti, etc. in the context of conflicting logics/requirements. Today, opposition grows everywhere against all visually polluting designs and outdoor advertising is the most prominent one. Some people think that it should be banned from the city. Some others, however, think that if advertisements are removed from the city, it will become a bland concrete jungle. Every city in Indonesia needs a clean-city law to control illegal advertisements and signs. It is possible to make legal yet attractive advertisements that will give positive contribution to “visual democracy” in Indonesia.

  9. Annual report of waste generation and pollution prevention progress 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-09-01

    This seventh Annual Report presents and analyzes DOE Complex-wide waste generation and pollution prevention activities at 45 reporting sites from 1993 through 1998. This section summarizes Calendar Year 1998 Complex-wide waste generation and pollution prevention accomplishments. More detailed information follows this section in the body of the Report. In May 1996, the Secretary of Energy established a 50 percent Complex-Wide Waste Reduction Goal (relative to the 1993 baseline) for routine operations radioactive, mixed, and hazardous waste generation, to be achieved by December31, 1999. DOE has achieved its Complex-Wide Waste Reduction Goals for routine operations based upon a comparison of 1998 waste generation to the 1993 baseline. Excluding sanitary waste, routine operations waste generation decreased 67 percent overall from 1993 to 1998. However, for the first time since 1994, the total amount of materials recycled by the Complex decreased from 109,600 metric tons in 1997 to 92,800 metric tons in 1998. This decrease is attributed to the fact that in 1997, several large ''one-time only'' recycling projects were conducted throughout the Complex. In order to demonstrate commitment to DOE's Complex-wide recycling goal, it is important for sites to identify all potential large-scale recycling/reuse opportunities.

  10. Mine water pollution in Scotland. Nature, extent and preventative strategies

    Energy Technology Data Exchange (ETDEWEB)

    Younger, P.L. [Water Resource Systems Research Laboratory, Department of Civil Engineering, University of Newcastle, NE1 7RU Newcastle Upon Tyne (United Kingdom)

    2001-01-29

    Scotland was one of the world's first industrialised countries, and has therefore also been one of the first countries to experience wholesale post-industrial dereliction. Water pollution arising from abandoned mines, particularly abandoned coal mines, is second only to sewage as a source of freshwater pollution nation-wide, and in many coalfield catchments it is the pre-eminent source. Most of the pollution is due to net-alkaline ferruginous waters emerging from deep mines. Scrutiny of records from 80 deep mine discharges reveals that iron concentrations in these waters are only likely to exceed 20 mg/l, and the pH to be below 6.5, where the discharge emerges within 0.5 km of the outcrop of the shallowest mined seam. The bulk of mature near-outcrop mine water discharges in Scotland have<50 mg/l total Fe, and concentrations>100 mg/l are only likely where a marine bed lies within 25 m of the worked seam. Where the nearest marine bed is more than 80 m above or below the seam, then the total iron will be less than 4 mg/l, and in most cases less than 1 mg/l. Net-acidic mine waters are far more rare than net-alkaline waters in Scotland, and are most commonly associated with unreclaimed spoil heaps (bings). Both net-alkaline and net-acidic discharges have detrimental effects on the hydrochemistry and biological integrity of receiving waters. Scotland has recently pioneered the use of pre-emptive pump-and-treat solutions to prevent mine water pollution, and has also experienced the successful introduction of passive treatment technology for both abandoned and active workings.

  11. Strategy for Meeting the Secretary of Energy and Hanford Site FY 2001 Pollution Prevention Goals

    International Nuclear Information System (INIS)

    CLARK, D.E.

    2000-01-01

    The purpose of this strategy is to identify the Fiscal Year (FY) 2001 Hanford Site waste reduction, sanitary recycling and affirmative procurement goals and identify the action required to ensure that the Secretary of Energy's FY 2005 pollution prevention and the FY 2001 Hanford Site goals are met. The strategy and plan to ensure that the Secretary of Energy's routine waste reduction, recycling, cleanup/stabilization waste and affirmative procurement goals are met consists of four phases. The first phase is to ensure that the infrastructure is in place to support planning and organization. This phase involves ensuring that roles and responsibilities are identified; requirement documents are current; goals and successes are communicated; and accurate and current waste information is available. Roles and responsibilities are identified and the RL requirement documents (i.e., the Hanford Site Waste Minimization and Pollution Prevention Awareness Program Plan and Hanford Site Guide for Preparing and Maintaining Generator Group Pollution Prevention Program Documentation) will specify the Secretary of Energy's goals. Goals will be communicated formally and informally via the Hanford Reach, training sessions, meetings and correspondence. Sharing of pollution prevention successes and goal progress are encouraged at the Pollution Prevention/Waste Minimization (PZ/WMin) quarterly meetings. Existing site waste generation databases will be utilized to provide current waste generation data. The second phase of the strategy and plan is to establish and allocate goals by prime contractor (i.e. Fluor Hanford, Inc. (FH), Pacific Northwest National Laboratory (PNNL), Bechtel Hanford Inc. (BHI), and CH2MHill Hanford Group (CHG)). This requires determining current status toward meeting the Secretary of Energy's goals; establishing the Hanford Site FY goals, and allocating waste reduction goals by prime contractor. The third phase of the strategy and plan is goal implementation. This

  12. Analysis of industrial pollution prevention programs in selected Asian countries

    Energy Technology Data Exchange (ETDEWEB)

    Chiu, S.Y. [Argonne National Lab., IL (United States). Environmental Assessment Div.]|[East-West Center, Honolulu, HI (United States)

    1995-05-01

    Industrialization in developing countries is causing increasing environmental damage. Pollution prevention (P2) is an emerging environmental concept that could help developing countries achieve leapfrog goals, bypassing old and pollutive technologies and minimizing traditional control practices. The current P2 promotion activities in Hong Kong, the Republic of Korea, the Philippines, Singapore, Taiwan, and Thailand are discussed. These programs, generally initiated in the last 5 years, are classified into five categories: awareness promotion, education and training, information transfer, technical assistance, and financial incentives. All important at the early stages of P2 promotion, these programs should inform industries of the benefits of P2 and help them identify applicable P2 measures. Participation in these programs is voluntary. The limited data indicate that adoption of P2 measures in these countries is not yet widespread. Recommendations for expanding P2 promotion activities include (1) strengthening the design and enforcement of environmental regulations; (2) providing P2 training and education to government workers, nongovernmental organizations and labor unions officials, university faculties, and news media; (3) tracking the progress of P2 programs; (4) implementing selected P2 mandatory measures; (5) identifying cleaner production technologies for use in new facilities; (6) implementing special programs for small and medium enterprises; and (7) expanding P2 promotion to other sectors, such as agriculture and transportation, and encouraging green design and green consumerism.

  13. Proceedings of pollution prevention and waste minimization tools workshop

    International Nuclear Information System (INIS)

    1995-01-01

    Pollution Prevention (P2) has evolved into one of DOE's sprime strategies to meet environmental, fiscal, and worker safety obligations. P2 program planning, opportunity identification, and implementation tools were developed under the direction of the Waste Minimization Division (EM-334). Forty experts from EM, DP, ER and DOE subcontractors attended this 2-day workshop to formulate the incentives to drive utilization of these tools. Plenary and small working group sessions were held both days. Working Group 1 identified incentives to overcoming barriers in the area of P2 program planning and resource allocation. Working Group 2 identified mechanisms to drive the completion of P2 assessments and generation of opportunities. Working Group 3 compiled and documented a broad range of potential P2 incentives that address fundamental barriers to implementation of cost effective opportunities

  14. Contacts in the Office of Pesticide Programs, Biopesticides and Pollution Prevention Division

    Science.gov (United States)

    Contact the Biopesticides and Pollution Prevention Division (BPPD) about regulatory activities associated with biologically-based pesticides, implementation of integrated pest management and the Pesticide Environmental Stewardship Program.

  15. Annual report of waste generation and pollution prevention progress 2000 [USDOE] [9th edition

    International Nuclear Information System (INIS)

    None

    2001-01-01

    This ninth edition of the Annual Report of Waste Generation and Pollution Prevention Progress highlights waste reduction, pollution prevention accomplishments, and cost savings/avoidance for the U.S. Department of Energy (DOE) Pollution Prevention Program for Fiscal Year 2000. This edition marks the first time that progress toward meeting the 2005 Pollution Prevention Goals, issued by the Secretary of Energy in November 1999, is being reported. In addition, the Annual Report has a new format, and now contains information on a fiscal year basis, which is consistent with other DOE reports

  16. Smart City Environmental Pollution Prevention and Control Design Based on Internet of Things

    Science.gov (United States)

    Peng, He; Bohong, Zheng; Qinpei, Kuang

    2017-11-01

    Due to increasingly serious urban pollution, this paper proposes an environmental pollution prevention and control system in combination with Internet of things. The system transfers data through the Internet, which also utilizes sensor, pH sensor and smoke sensor to obtain environmental data. Besides, combined with the video data acquired through monitoring, the data are transferred to data center to analyze the haze pollution, water pollution and fire disaster in environment. According to the results, multi-purpose vehicles are mobilized to complete the tasks such as spraying water to relieve haze, water source purification and fire fighting in city environment. Experiments show that the environmental pollution prevention and control system designed in this paper can automatically complete the urban environmental pollution detection, prevention and control, which thus reduces human and material resources and improves the efficiency of pollution prevention and control. Therefore, it possesses greatly practical significance to the construction of smart city.

  17. A proposed framework for conducting pollution prevention design assessments (P2DAs) on U.S. Department of Energy design projects

    International Nuclear Information System (INIS)

    Dorsey, J.A.

    1995-03-01

    The purpose of this manual is to provide a framework for project managers, engineers, and designers to integrate pollution prevention principles and features into DOE design projects. The framework suggested is referred to as the pollution prevention design assessment (P2DA). The P2DA is based on DOE's method for conducting pollution prevention opportunity assessments (PPOAs) on existing waste-generating operations, but the P2DA is modified because the facility or process it assesses does not physically exist during design. Before the P2DA framework is introduced in the manual, recommendations for establishing the P2DA team and budget are provided. Specific pollution prevention requirements and opportunities for each design stage as delineated in DOE Order 4700.1 Project Management System are also discussed and a sample format for drafting a P2DA report is provided in the appendix. The scope of this manual includes not only the P2DA framework, but also a background discussion of pollution prevention and related topics; the regulatory requirements mandating design for pollution prevention; the benefits and barriers of designing for pollution prevention; and the impact that pollution prevention and related environmental avoidance concepts have had on the engineering profession

  18. Westinghouse Hanford Company waste minimization and pollution prevention awareness program plan

    International Nuclear Information System (INIS)

    Craig, P.A.; Nichols, D.H.; Lindsey, D.W.

    1991-08-01

    The purpose of this plan is to establish the Westinghouse Hanford Company's Waste Minimization Program. The plan specifies activities and methods that will be employed to reduce the quantity and toxicity of waste generated at Westinghouse Hanford Company (Westinghouse Hanford). It is designed to satisfy the US Department of Energy (DOE) and other legal requirements that are discussed in Subsection C of the section. The Pollution Prevention Awareness Program is included with the Waste Minimization Program as permitted by DOE Order 5400.1 (DOE 1988a). This plan is based on the Hanford Site Waste Minimization and Pollution Prevention Awareness Program Plan, which directs DOE Field Office, Richland contractors to develop and maintain a waste minimization program. This waste minimization program is an organized, comprehensive, and continual effort to systematically reduce waste generation. The Westinghouse Hanford Waste Minimization Program is designed to prevent or minimize pollutant releases to all environmental media from all aspects of Westinghouse Hanford operations and offers increased protection of public health and the environment. 14 refs., 2 figs., 1 tab

  19. Deployment of pollution prevention during design -- a case study

    International Nuclear Information System (INIS)

    Del Mar, R.A.; Ambalam, T.T.

    1997-08-01

    Traditionally, pollution prevention (P2) assessments have been performed on existing facilities and ongoing operations, well after the completion of design and construction. It has been theorized that more success can be achieved by moving P2 upstream into the design process, where an estimated 70% of a project's total life cycle costs are initially fixed. Decisions made during design to prevent or minimize the amount of waste generated can reap benefits for many years to come. This is especially true when designing systems for handling hazardous and radioactive wastes for treatment, storage, and disposal. P2 assessments performed during design of such projects can uncover significant savings to be reaped during project construction, operations, and/or decommissioning. However, many project managers are still reluctant to include some type of P2 review or assessment as part of the design effort, because the immediate payback to the design entity is difficult to quantify. This paper presents the results of a P2 assessment performed on a design project at Hanford which identified close to $500,000 in construction savings while minimizing low-level and mixed radioactive waste generation. This paper describes the process used to per-form the assessment, discusses its results, and provides lessons-learned for future P2 design assessments

  20. NASA LANGLEY RESEARCH CENTER AND THE TIDEWATER INTERAGENCY POLLUTION PREVENTION PROGRAM

    Science.gov (United States)

    National Aeronautics and Space Administration (NASA)'s Langley Research Center (LaRC) is an 807-acre research center devoted to aeronautics and space research. aRC has initiated a broad-based pollution prevention program guided by a Pollution Prevention Program Plan and implement...

  1. 40 CFR 52.1639 - Prevention of air pollution emergency episodes.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Prevention of air pollution emergency episodes. 52.1639 Section 52.1639 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) New Mexico § 52.1639 Prevention of air pollution emergency...

  2. 40 CFR 52.2227 - Prevention of air pollution emergency episodes.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Prevention of air pollution emergency episodes. 52.2227 Section 52.2227 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Tennessee § 52.2227 Prevention of air pollution emergency...

  3. 40 CFR 52.11 - Prevention of air pollution emergency episodes.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Prevention of air pollution emergency episodes. 52.11 Section 52.11 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS General Provisions § 52.11 Prevention of air pollution emergency episodes. ...

  4. 40 CFR 52.1934 - Prevention of air pollution emergency episodes.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Prevention of air pollution emergency episodes. 52.1934 Section 52.1934 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) Oklahoma § 52.1934 Prevention of air pollution emergency...

  5. DEVELOPMENT OF THE U.S. EPA'S METAL FINISHING FACILITY POLLUTION PREVENTION TOOL

    Science.gov (United States)

    Metal finishing processes are a type of chemical processes and can be modeled using Computer Aided Process Engineering (CAPE). Currently, the U.S. EPA is developing the Metal Finishing Facility Pollution Prevention Tool (MFFP2T), a pollution prevention software tool for the meta...

  6. Directory of Pollution Prevention in Higher Education: Faculty and Programs 1992. Doc #93-2.

    Science.gov (United States)

    Bakshani, Nandkumar; Allen, David

    This survey reports the current state of development of pollution prevention education in Universities in the United States based on a national survey conducted between December 1991 and February 1992. Over 140 individuals (from 80 institutions) believed to be active in pollution prevention education were contacted and of these 89 (from 59…

  7. Pollution-Prevention Information Campaigns for Small Businesses: An Audience Analysis.

    Science.gov (United States)

    Boiarsky, Greg; Long, Marilee; Zimmerman, Donald E.

    1999-01-01

    Explores the results of a random phone survey of 300 small businesses in order to develop a pollution-prevention campaign. Results indicate that respondents understood the concept of pollution prevention and were taking steps to reduce their part in it. Businesses preferred to obtain their information from suppliers, publications, and other…

  8. Integrated Pollution Prevention and Control: a review of health authorities' experience.

    Science.gov (United States)

    Lanser, Shelley; Pless-Mulloli, Tanja

    2003-09-01

    In August 2000, health authorities in England and Wales became statutory consultees for permits issued to industry by the Environment Agency as part of the implementation of EU directives. This responsibility has since been delegated to Primary Care Trusts. To assess health authority responses to applications made under the Integrated Pollution Prevention and Control (IPPC) regulations, we collected data from public registers during the first 12 months of this new regulatory regime. There was evidence of 27 applications, of which 59 per cent had substantive comments from health authorities. There was wide variation in the length and content. Responses were from Consultants in Communicable Disease Control (57 per cent) or Directors of Public Health (43 per cent). Only two health authorities had a dedicated resource for responding to IPPC applications. Capacity and capability are lacking and require resources invested for consistent, effective public health input to the process of permitting potentially polluting industries.

  9. Pollution prevention at the Kansas City Division through process waste assessments

    International Nuclear Information System (INIS)

    Pemberton, S.E.; Gentile, C.C.

    1992-01-01

    Allied-Signal Inc., Kansas City Division (KCD) is committed to the hazardous waste minimization requirements set forth under RCRA as amended by the Pollution Prevention Act and DOE Order 5400.1. To assure compliance with these regulations, the KCD has developed a comprehensive Pollution Prevention Program which focuses on the elimination or minimization of all material releases to all environmental media. The ownership of waste minimization is given to all of the waste generators through Departmental Pollution Prevention Plans. These plans include tools to achieve the waste minimization goals. One of these tools is the process waste assessment (PWA). A PWA is a planned procedure with the objective of identifying opportunities and methods to reduce or eliminate waste. A material balance is performed around a specific process which qualifies and quantifies the materials entering and exiting the process. These materials are further defined to the hazardous component level. The exiting materials are separated into what goes into the product, sent to waste management, and what is released to the air (fugitive or point source). Next, opportunities are identified and evaluated for the ability to eliminate or minimize the waste streams exiting the process. Therefore, the PWA provides the basic tool for the creation of a comprehensive process baseline and identification of opportunities to eliminate/minimize the release of hazardous and non-hazardous wastes. This presentation will describe the status and activities of the program conceived to initiate PWAs at the Kansas City Division (KCD) of Allied-Signal Inc.. This program is organized through business units Which consist of manufacturing, quality, and engineering personnel from a specific product line. The departments that these business units represent are the generators of the major process waste at the KCD. Included in the update will be a brief overview of the lessons learned from the methodology development and

  10. Role of the American Institute for Pollution Prevention in reducing environmental risk

    International Nuclear Information System (INIS)

    Hauser, T.R.

    1991-01-01

    The EPA Science Advisory Board recommended that in the decade of the 1990's, EPA strategy should focus on the long-term goal of preventing and reducing environmental risk and should shift from end-of-pipe controls to preventing the generation of pollution. To assist EPA in developing and implementing this philosophy, the American Institute for Pollution Prevention (AIPP) was founded jointly by EPA and the University of Cincinnati in June, 1989. The mission of the Institute is to generate broad support from private and public sectors and to assist EPA in achieving widespread and expeditious adoption of pollution prevention concepts. AIPP will provide a novel communication bridge between EPA and industry. AIPP will provide and promote liasion between professionals in the field of pollution and those who need to employ new and improved pollution prevention techniques

  11. Air Pollution Prevention and Control Policy in China.

    Science.gov (United States)

    Huang, Cunrui; Wang, Qiong; Wang, Suhan; Ren, Meng; Ma, Rui; He, Yiling

    2017-01-01

    With rapid urbanization and development of transport infrastructure, air pollution caused by multiple-pollutant emissions and vehicle exhaust has been aggravated year by year in China. In order to improve air quality, the Chinese authorities have taken a series of actions to control air pollution emission load within a permissible range. However, although China has made positive progress on tackling air pollution, these actions have not kept up with its economy growth and fossil-fuel use. The traditional single-pollutant approach is far from enough in China now, and in the near future, air pollution control strategies should move in the direction of the multiple-pollutant approach. In addition, undesirable air quality is usually linked with the combination of high emissions and adverse weather conditions. However, few studies have been done on the influence of climate change on atmospheric chemistry in the global perspective. Available evidence suggested that climate change is likely to exacerbate certain kinds of air pollutants including ozone and smoke from wildfires. This has become a major public health problem because the interactions of global climate change, urban heat islands, and air pollution have adverse effects on human health. In this chapter, we first review the past and current circumstances of China's responses to air pollution. Then we discuss the control challenges and future options for a better air quality in China. Finally, we begin to unravel links between air pollution and climate change, providing new opportunities for integrated research and actions in China.

  12. Integration of biotechnology in remediation and pollution prevention activities

    International Nuclear Information System (INIS)

    Strong-Gunderson, J.M.

    1996-01-01

    The North American Free Trade Agreement/North American Agreement on Environmental Cooperation provides a mechanism for an international collaboration between the US, Canada, and Mexico to jointly develop, modify, or refine technologies that remediate or protect the environment. These countries have a vested interest in this type of collaboration because contaminants do not respect the boundaries of a manufacturing site, region, city, state, or country. The Environmental Sciences Division (ESD) at Oak Ridge National Laboratory (ORNL) consists of a diverse group of individuals who address a variety of environmental issues. ESD is involved in basic and applied research on the fate, transport, and remediation of contaminants; environmental assessment; environmental engineering; and demonstrations of advanced remediation technologies. The remediation and protection of the environment includes water, air, and soils for organic, inorganic, and radioactive contaminants. In addition to remediating contaminated sites, research also focuses on life-cycle analyses of industrial processes and the production of green technologies. The author focuses this discussion on subsurface remediation and pollution prevention; however, the research activities encompass water, soil and air and many of the technologies are applicable to all environments. The discussion focuses on the integration of biotechnology with remediation activities and subsequently linking these biological processes to other remediation technologies

  13. Airlie House Pollution Prevention Technology Transfer pilot projects

    Energy Technology Data Exchange (ETDEWEB)

    Thuot, J.R.; Myron, H.; Gatrone, R.; McHenry, J.

    1996-08-01

    The projects were a series of pilot projects developed for DOE with the intention of transferring pollution prevention technology to private industry. The concept was to develop small technology transfer initiatives in partnership with the private sector. Argonne National Laboratory developed three projects: the microscale chemistry in education program, the microscale cost benefit study, and the Bethel New Life recycling trainee program. The two microscale chemistry projects focused on introducing microscale chemistry technologies to secondary and college education. These programs were inexpensive to develop and received excellent evaluations from participants and regulators. The recycle trainee project provided training for two participants and identified recycling and source reduction opportunities in Argonne`s solid waste stream. The pilot projects demonstrated that technology transfer initiatives can be developed and implemented with a small budget and within a short period of time. The essential components of the pilot projects were identification of target technologies that were already available, identification of target audiences, and a focus of effort to achieve a limited but defined objective.

  14. Annual report of waste generation and pollution prevention progress 1997

    International Nuclear Information System (INIS)

    1998-09-01

    This sixth Annual Report presents and analyzes DOE Complex-wide waste generation and pollution prevention activities at 36 reporting sites from 1993 through 1997. In May 1996, the Secretary of Energy established a 50 percent Complex-Wide Waste Reduction Goal (relative to the 1993 baseline) for routine operations radioactive and hazardous waste generation, to be achieved by December 31, 1999. Excluding sanitary waste, routine operations waste generation increased three percent from 1996 to 1997, and decreased 61 percent overall from 1993 to 1997. DOE has achieved its Complex-Wide Waste Reduction Goals for routine operations based upon a comparison of 1997 waste generation to the 1993 baseline. However, it is important to note that increases in low-level radioactive and low-level mixed waste generation could reverse this achievement. From 1996 to 1997, low-level radioactive waste generation increased 10 percent, and low-level mixed waste generation increased slightly. It is critical that DOE sites continue to reduce routine operations waste generation for all waste types, to ensure that DOE's Complex-Wide Waste Reduction Goals are achieved by December 31, 1999

  15. PREVENTING POLLUTION USING ISO 14001 AT A PARTICLE ACCELERATOR THE RELATIVISTIC HEAVY ION COLLIDER PROJECT

    International Nuclear Information System (INIS)

    BRIGGS, S.L.K.; MUSOLINO, S.V.

    2001-01-01

    In early 1997 Brookhaven National Laboratory (BNL) discovered that the spent fuel pool of their High Flux Beam Reactor was leaking tritium into the groundwater. Community members, activist groups, politicians and regulators were outraged with the poor environmental management practices at BNL. The reactor was shut down and the Department of Energy (DOE) terminated the contract with the existing Management Company. At this same time, a major new scientific facility, the Relativistic Heavy Ion Collider (RHIC), was nearing the end of construction and readying for commissioning. Although environmental considerations had been incorporated into the design of the facility; some interested parties were skeptical that this new facility would not cause significant environmental impacts. RHIC management recognized that the future of its operation was dependent on preventing pollution and allaying concerns of its stakeholders. Although never done at a DOE National Laboratory before Brookhaven Science Associates, the new management firm, committed to implementing an Environmental Management System (EMS) and RHIC managers volunteered to deploy it within their facility on an extremely aggressive schedule. Several of these IS0 requirements contribute directly to preventing pollution, an area where particular emphasis was placed. This paper describes how Brookhaven used the following key IS0 14001 elements to institutionalize Pollution Prevention concepts: Environmental Policy, Aspects, Objectives and Targets, Environmental Management Program, Structure and Responsibility, Operational Controls, Training, and Management Review. In addition, examples of implementation at the RHIC Project illustrate how BNL's premiere facility was able to demonstrate to interested parties that care had been taken to implement technological and administrative controls to minimize environmental impacts, while at the same time reduce the applicability of regulatory requirements to their operations

  16. 15 CFR 923.45 - Air and water pollution control requirements.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Air and water pollution control....45 Air and water pollution control requirements. The program must incorporate, by reference or otherwise, all requirements established by the Federal Water Pollution Control Act, as amended (Clean Water...

  17. Achieving multiple compliance objectives through a storm water pollution prevention plan

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, K.J.; Cataldo, R. [ENSR, Acton, MA (United States)

    1997-09-01

    All across the US, facility managers and environmental staff are trying to keep up with proliferating regulations and associated filing and reporting requirements. Added to the already full plate of regulations is the National Pollutant Discharge Elimination System (NPDES) program for storm water management. The NPDES program requires a permit for the discharge of runoff from facilities based on Standard Industrial Classification (SIC) code. Some businesses do not yet need to comply with NPDES, as not all types of facilities were included in the Phase 1 list of regulated activities (September 1992). However, most businesses will be included as part of Phase 2 by 2002. Furthermore, states adopting administration of the NPDES program have the option of accelerating the process. In addition to filing for a permit, the NPDES storm water program requires the preparation and implementation of a Storm Water Pollution Prevention Plan (SWPPP). A properly prepared SWPPP can help facilities more easily comply with regulatory requirements and serve as an overall facility management tool.

  18. 40 CFR 63.1213 - How can the compliance date be extended to install pollution prevention or waste minimization...

    Science.gov (United States)

    2010-07-01

    ... to install pollution prevention or waste minimization controls? 63.1213 Section 63.1213 Protection of... pollution prevention or waste minimization controls? (a) Applicability. You may request from the... must contain the following information: (i) A description of pollution prevention or waste minimization...

  19. The History of Petroleum Pollution in Malaysia; Urgent Need for Integrated Prevention Approach

    OpenAIRE

    Mahyar Sakari

    2010-01-01

    Petroleum pollution is known as point and non-point source of contaminations in the environment. A major class of petroleum contaminant is groups of compounds consist of two or more fused benzene rings called polycyclic aromatic hydrocarbons (PAHs) that are carcinogenic, mutagenic and toxic. Source identification of petroleum pollution is necessary to prevent pollution entry into the environment. Eight sedimentary cores were obtained from developed and developing areas around Peninsular Malay...

  20. A Study of Innovation: ERD Takes Pollution Prevention to a New Level

    International Nuclear Information System (INIS)

    Southmayd, A.

    1999-01-01

    ERD approaches its mission with a vision of continuously exceeding customer needs and expectations and continuously improving. It's this vision of continuous improvement that drives the ERD pollution prevention program towards innovation

  1. A pollution prevention chargeback system at Sandia National Laboratories, New Mexico

    International Nuclear Information System (INIS)

    Davis, R.; Fish, J.; Brown, C.

    1994-08-01

    Sandia National Laboratories, New Mexico (Sandia/NM) has successfully developed and implemented a chargeback system to fund the implementation of Pollution Prevention activities. In the process of establishing this system, many valuable lessons have been learned. This paper describes how the chargeback system currently functions, the benefits and drawbacks of implementing such a system, and recommendations for implementing a chargeback system at other facilities. The initial goals in establishing a chargeback system were to create (1) funding for pollution prevention implementation, including specific pollution prevention projects; and (2) awareness on the part of the line organizations of the quantities and types of waste that they generate, thus providing them with a direct incentive to reduce that waste. The chargeback system inputs waste generation data and then filters and sorts the data to serve two purposes: (1) the operation of the chargeback system; and (2) the detailed waste generation reporting used for assessing processes and identifying pollution prevention opportunities

  2. Stormwater Pollution Prevention Plan TA-60 Roads and Grounds Facility and Associated Sigma Mesa Staging Area

    Energy Technology Data Exchange (ETDEWEB)

    Sandoval, Leonard Frank [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-02-01

    This Stormwater Pollution Prevention Plan (SWPPP) is applicable to operations at the Technical Area -60 (TA-60) Roads and Grounds Facility and Associated Sigma Mesa Staging Area off Eniwetok Drive, in Los Alamos County, New Mexico.

  3. Preventing industrial pollution at its source: the final report of the Michigan source reduction initiative

    Energy Technology Data Exchange (ETDEWEB)

    None

    1999-09-01

    This report describes a collaborative effort between NRDC, Dow Chemical, and Michigan Environmental Groups. The effort resulted in the identification and implementation of 17 pollution prevention projects that reduced substantial quantities of wastes and emissions and saved Dow considerable money.

  4. Preventing industrial pollution at its source: the final report of the Michigan source reduction initiative; FINAL

    International Nuclear Information System (INIS)

    None

    1999-01-01

    This report describes a collaborative effort between NRDC, Dow Chemical, and Michigan Environmental Groups. The effort resulted in the identification and implementation of 17 pollution prevention projects that reduced substantial quantities of wastes and emissions and saved Dow considerable money

  5. Development of a method to evaluate the technical and environmental feasibility of particular pollution prevention opportunities.

    Science.gov (United States)

    2000-06-01

    The Virginia Department of Transportation (VDOT) is obligated by House Joint Resolution 453 passed in 1995 by Virginia's General Assembly to develop and implement a pollution prevention (P2) program. The primary purpose of this study was to develop a...

  6. A Study of Innovation: ERD Takes Pollution Prevention to a New Level

    Energy Technology Data Exchange (ETDEWEB)

    Southmayd, A.

    1999-01-20

    ERD approaches its mission with a vision of continuously exceeding customer needs and expectations and continuously improving. It's this vision of continuous improvement that drives the ERD pollution prevention program towards innovation.

  7. POLLUTION PREVENTION OPPORTUNITY ASSESSMENT - MANUFACTURING AND FABRICATION REPAIR LABORATORY AT SANDIA NATIONAL LABORATORIES

    Science.gov (United States)

    These reports summarize pollution prevention opportunity assessments conducted jointly by EPA and DOE at the Geochemistry Laboratory and the Manufacturing and Fabrication Repair Laboratory at the Department of Energy's Sandia National Laboratories facility in Albuquerque, New Mex...

  8. Stormwater Pollution Prevention Plan TA-60 Asphalt Batch Plant Revision 2: January 2017

    Energy Technology Data Exchange (ETDEWEB)

    Sandoval, Leonard Frank [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-02-01

    The Stormwater Pollution Prevention Team (PPT) is applicable to operations at the Technical Area (TA)- 60 Asphalt Batch Plant (ABP) located on Eniwetok Drive/Sigma Mesa, in Los Alamos County, New Mexico at Los Alamos National Laboratory (LANL).

  9. A computer based system for prioritizing pollution prevention opportunity assessments at SNL/NM

    International Nuclear Information System (INIS)

    Custer, M.S.; Leishman, N.L.; Walsh, M.L.; Nelson, J.D.; Davis, R.L.; Bueno, N.C.

    1996-01-01

    Prioritizing waste generators is necessary to determine which are the best candidates for Pollution Prevention Opportunity Assessments (PPOAs). This paper describes the Sandia National Laboratories/New Mexico (SNL/NM) PPOA Ranking System. The system uses a multimedia approach that considers hazardous and radioactive waste disposal data, and hazardous chemical usage data (from which air emissions are extrapolated). Pollution prevention information is included, from the SNL Pollution Prevention Opportunities database that identifies waste streams that have readily apparent pollution prevention opportunities. The system also considers the relative costs of waste management and the chargeback fees paid for waste generation. From these data, organizations are ranked with an algorithm developed in Microsoft Access trademark on a personal computer. The concept could readily be transferred to other facilities needing to decide where to perform PPOAs

  10. Full report: Assessment and opportunity identification of energy efficient pollution prevention technologies and processes

    Energy Technology Data Exchange (ETDEWEB)

    1994-11-01

    US industry produces about 12 billion tons of waste a year, or two-thirds of the waste generated in the US. The costs of handling and disposing of these wastes are significant, estimated to be between $25 and $43 billion in 1991, and represent an increase of 66% since 1986. US industry also uses about one-third of all energy consumed in the nation, which adds to the environmental burden. Industrial wastes affect the environmental well-being of the nation and, because of their growing costs, the competitive abilities of US industry. As part of a national effort to reduce industrial wastes, the US Congress passed the Energy Policy Act (EPAct, P.L. 102-486). Section 2108, subsections (b) and (c), of EPAct requires the Department of Energy (DOE) to identify opportunities to demonstrate energy efficient pollution prevention technologies and processes; to assess their availability and the energy, environmental, and cost effects of such technologies; and to report the results. Work for this report clearly pointed to two things, that there is insufficient data on wastes and that there is great breadth and diversity in the US industrial sector. This report identifies: information currently available on industrial sector waste streams, opportunities for demonstration of energy efficient pollution prevention technologies in two industries that produce significant amounts of waste--chemicals and petroleum, characteristics of waste reducing and energy saving technologies identifiable in the public literature, and potential barriers to adoption of waste reducing technologies by industry.

  11. Environmental Restoration Progam Waste Minimization and Pollution Prevention Awareness Program Plan

    Energy Technology Data Exchange (ETDEWEB)

    Grumski, J. T.; Swindle, D. W.; Bates, L. D.; DeLozier, M. F.P.; Frye, C. E.; Mitchell, M. E.

    1991-09-30

    In response to DOE Order 5400.1 this plan outlines the requirements for a Waste Minimization and Pollution Prevention Awareness Program for the Environmental Restoration (ER) Program at Martin Marietta Energy System, Inc. Statements of the national, Department of Energy, Energy Systems, and Energy Systems ER Program policies on waste minimization are included and reflect the attitudes of these organizations and their commitment to the waste minimization effort. Organizational responsibilities for the waste minimization effort are clearly defined and discussed, and the program objectives and goals are set forth. Waste assessment is addressed as being a key element in developing the waste generation baseline. There are discussions on the scope of ER-specific waste minimization techniques and approaches to employee awareness and training. There is also a discussion on the process for continual evaluation of the Waste Minimization Program. Appendixes present an implementation schedule for the Waste Minimization and Pollution Prevention Program, the program budget, an organization chart, and the ER waste minimization policy.

  12. Environmental Restoration Progam Waste Minimization and Pollution Prevention Awareness Program Plan

    International Nuclear Information System (INIS)

    1991-01-01

    In response to DOE Order 5400.1 this plan outlines the requirements for a Waste Minimization and Pollution Prevention Awareness Program for the Environmental Restoration (ER) Program at Martin Marietta Energy System, Inc. Statements of the national, Department of Energy, Energy Systems, and Energy Systems ER Program policies on waste minimization are included and reflect the attitudes of these organizations and their commitment to the waste minimization effort. Organizational responsibilities for the waste minimization effort are clearly defined and discussed, and the program objectives and goals are set forth. Waste assessment is addressed as being a key element in developing the waste generation baseline. There are discussions on the scope of ER-specific waste minimization techniques and approaches to employee awareness and training. There is also a discussion on the process for continual evaluation of the Waste Minimization Program. Appendixes present an implementation schedule for the Waste Minimization and Pollution Prevention Program, the program budget, an organization chart, and the ER waste minimization policy

  13. The U.S. Department of Energy pollution prevention program: Applications for small business

    Energy Technology Data Exchange (ETDEWEB)

    Betsch, M.D.

    1997-05-14

    This report shows the benefits small businesses can realize by instituting cost-effective pollution prevention improvements. It is a series of pollution prevention assessments that were conducted at small businesses in Richland, Washington. It describes a technology transfer test of US Department of Energy (USDOE) pollution prevention methods to small businesses through eleven pollution prevention assessments conducted at small businesses in the city of Richland. The assessment method tested was first developed at the USDOE Hanford Site, located in Richland, Washington. Two pilot studies were initially conducted to determine the usefulness of the assessment method for small businesses. Then, four additional pollution prevention assessments were conducted using a refined process. In order to determine the assessment method`s usefulness by different practitioners, a number of the assessments contained in this report were conducted by the undergraduate and graduate students at Washington State University at Tri-Cities as part of their class projects. These students were trained in the pollution prevention assessment process by the author of this report and conducted five small business assessments using the same methods and materials as in the remainder of the study.

  14. The U.S. Department of Energy pollution prevention program: Applications for small business

    International Nuclear Information System (INIS)

    Betsch, M.D.

    1997-01-01

    This report shows the benefits small businesses can realize by instituting cost-effective pollution prevention improvements. It is a series of pollution prevention assessments that were conducted at small businesses in Richland, Washington. It describes a technology transfer test of US Department of Energy (USDOE) pollution prevention methods to small businesses through eleven pollution prevention assessments conducted at small businesses in the city of Richland. The assessment method tested was first developed at the USDOE Hanford Site, located in Richland, Washington. Two pilot studies were initially conducted to determine the usefulness of the assessment method for small businesses. Then, four additional pollution prevention assessments were conducted using a refined process. In order to determine the assessment method's usefulness by different practitioners, a number of the assessments contained in this report were conducted by the undergraduate and graduate students at Washington State University at Tri-Cities as part of their class projects. These students were trained in the pollution prevention assessment process by the author of this report and conducted five small business assessments using the same methods and materials as in the remainder of the study

  15. Environmental Restoration Program pollution prevention checklist guide for the feasibility study project phase

    International Nuclear Information System (INIS)

    1993-09-01

    Feasibility studies (FS) determine what remedial alternatives are presented to regulators for site cleanup. A key consideration in this process is the waste to be generated. Minimizing the volume and toxicity of this waste will ultimately contribute to the selection of the best remedial option. The purpose of this checklist guide is to assist the user in incorporating pollution prevention/waste minimization (PP/WM) in all FS phase projects of the Environmental Restoration (ER) Program. This guide will help users document PP/WM activities for technology transfer and reporting requirements. Automated computer screens will be created from the checklist data to assist users with implementing and evaluating waste reduction. Users can then establish numerical performance measures to measure progress in planning, training, self-assessments, field implementation, documentation, and technology transfer. Cost savings result as users train and assess themselves and perform preliminary waste assessments

  16. Pollution prevention/waste minimization program 1998 fiscal year work plan - WBS 1.11.2.1

    International Nuclear Information System (INIS)

    Howald, S.C.; Merry, D.S.

    1997-09-01

    Pollution Prevention/Waste Minimization (P2/WMin) is the Department of Energy's preferred approach to environmental management. The P2/WMin mission is to eliminate or minimize waste generation, pollutant releases to the environment, use of toxic substances, and to conserve resources by implementing cost-effective pollution prevention technologies, practices, and polices

  17. CONSTRUCTED WETLAND TECHNOLOGY TO PREVENT WATER RESOURCES POLLUTION

    OpenAIRE

    Zeki Gökalp; Sedat Karaman; Ismail Taş; Halil Kirnak

    2016-01-01

    Discharge of untreated waste waters into surface waters creates significant pollution in these resources. Wastewaters are most of the time discharged into seas, rivers and other water bodies without any treatments due to high treatment costs both in Turkey and throughout the world. Constructed wetlands, also called as natural treatment systems, are used as an alternative treatment system to conventional high-cost treatment systems because of their low construction, operation and maintenance c...

  18. Potential pollution prevention and waste minimization for Department of Energy operations

    International Nuclear Information System (INIS)

    Griffin, J.; Ischay, C.; Kennicott, M.; Pemberton, S.; Tull, D.

    1995-10-01

    With the tightening of budgets and limited resources, it is important to ensure operations are carried out in a cost-effective and productive manner. Implementing an effective Pollution Prevention strategy can help to reduce the costs of waste management and prevent harmful releases to the environment. This document provides an estimate of the Department of Energy's waste reduction potential from the implementation of Pollution Prevention opportunities. A team of Waste Minimization and Pollution Prevention professionals was formed to collect the data and make the estimates. The report includes a list of specific reduction opportunities for various waste generating operations and waste types. A generic set of recommendations to achieve these reduction opportunities is also provided as well as a general discussion of the approach and assumptions made for each waste generating operation

  19. The History of Petroleum Pollution in Malaysia; Urgent Need for Integrated Prevention Approach

    Directory of Open Access Journals (Sweden)

    Mahyar Sakari

    2010-01-01

    Full Text Available Petroleum pollution is known as point and non-point source of contaminations in the environment. A major class of petroleum contaminant is groups of compounds consist of two or more fused benzene rings called polycyclic aromatic hydrocarbons (PAHs that are carcinogenic, mutagenic and toxic. Source identification of petroleum pollution is necessary to prevent pollution entry into the environment. Eight sedimentary cores were obtained from developed and developing areas around Peninsular Malaysia to investigate the historical profile of PAHs, their characteristics and its possible origins. The results showed that the PAHs concentrations varied from very minimum to 2400 ng/g d. w. in average quarter century intervals. Most of the studied locations showed high contribution of PAHs from combusted fuel, coal, biomasses and wood materials except for the southern part of Peninsular Malaysia in which revealed dominance of petroleum products. The findings indicate that PAHs are delivered from different intermediate materials such as asphalt, street dust, vehicular emission and crankcase oil. However, there has been a decline of PAHs input into the marine environment in recent years; petroleum is shown to be a significant cause of marine pollution since the second quarter of 20th century. An overview on sourced materials of petroleum pollution indicates multi-approach necessity toward pollution control, regardless of concentration and possible degradation processes. Various sectors both governmental and non-governmental are needed for prevention and control of petroleum pollution where different sources apparently contribute to the pollution generation process.

  20. POLLUTION PREVENTION RESEARCH ONGOING - EPA'S RISK REDUCTION ENGINEERING LABORATORY

    Science.gov (United States)

    The mission of the Risk Reduction Engineering Laboratory is to advance the understanding, development and application of engineering solutions for the prevention or reduction of risks from environmental contamination. This mission is accomplished through basic and applied researc...

  1. Stormwater Pollution Prevention Plan - TA-60 Roads and Grounds Facility and Associated Sigma Mesa Staging Area

    Energy Technology Data Exchange (ETDEWEB)

    Sandoval, Leonard Frank [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2018-01-31

    This Storm Water Pollution Prevention Plan (SWPPP) was developed in accordance with the provisions of the Clean Water Act (33 U.S.C. §§1251 et seq., as amended), and the Multi-Sector General Permit for Storm Water Discharges Associated with Industrial Activity (U.S. EPA, June 2015) issued by the U.S. Environmental Protection Agency (EPA) for the National Pollutant Discharge Elimination System (NPDES) and using the industry specific permit requirements for Sector P-Land Transportation and Warehousing as a guide. This SWPPP applies to discharges of stormwater from the operational areas of the TA-60 Roads and Grounds and Associated Sigma Mesa Staging Area at Los Alamos National Laboratory. Los Alamos National Laboratory (also referred to as LANL or the “Laboratory”) is owned by the Department of Energy (DOE), and is operated by Los Alamos National Security, LLC (LANS). Throughout this document, the term “facility” refers to the TA-60 Roads and Grounds and Associated Sigma Mesa Staging Area. The current permit expires at midnight on June 4, 2020.

  2. Prevention of Polluting Rivers and Lakes from Ships

    Directory of Open Access Journals (Sweden)

    Natalija Jolić

    2005-09-01

    Full Text Available Traffic on rivers and lakes in Europe has been ve1y well developed.The reason for this is the transport cost, relative speedand good connectivity of major European cities by rivers andcanals. In Croatia, this transport mode is lagging behind therest of Europe. Croatia is located at an interesting section of theriver transversal, but due to several reasons, river navigation inCroatia has not been developed to any major extent. As operatingriver ships the most frequent types are: towboats, pushboatsand self-propelled ships. The installed diesel engines, propulsionand auxiliary engines run at high power. Proportional tothe increase in the power of installed engines is also the increasein the volume of waste produced by the engines. Also, the olderthe engine, the greater volume of waste it produces. Ships mayalso cause pollution by wastewaters and garbage. This pollutionthreat grows with the greater number of people on boardand the age of the ship. In order to minimize these possibilitiesof pollution, it is necesswy to control all the time the properfunctioning of the ships, train the staff and construct receptionfacilities on land.

  3. Pollution prevention opportunity assessment for Sandia National Laboratories/California recycling programs.

    Energy Technology Data Exchange (ETDEWEB)

    Wrons, Ralph Jordan; Vetter, Douglas Walter

    2007-07-01

    This Pollution Prevention Opportunity Assessment (PPOA) was conducted for the Sandia National Laboratories/California (SNL/CA) Environmental Management Department between May 2006 and March 2007, to evaluate the current site-wide recycling program for potential opportunities to improve the efficiency of the program. This report contains a summary of the information collected and analyses performed with recommended options for implementation. The SNL/NM Pollution Prevention (P2) staff worked with the SNL/CA P2 Staff to arrive at these options.

  4. The need for integrated pollution prevention control of the environment concerning industrial and power plants

    International Nuclear Information System (INIS)

    Trpevska T, Magdalena; Kostova, Brankitsa

    2008-01-01

    Within the Low on the Environment, Regulations of the Directive 96/61/Eu regarding Integrated Pollution Prevention Control are implemented. The Low significantly changes the manner of industrial plants operation in reference to environmental protection. The study presents description of the system for Integrated Pollution Prevention Control, list of production branches to which this system refers, and as well as experiences of Tehnolab Ltd, Skopje - expert consulting company, concerning preparation of A and B Integrated Environmental Permits for several installation from R. Macedonia.(Author)

  5. Environmental Restoration Program pollution prevention checklist guide for the facility characterization project phase

    International Nuclear Information System (INIS)

    1993-09-01

    A facility characterization (FC) is conducted to determine the nature and extent contamination at a potential hazardous facility waste site. The information gathered during an FC includes (1) data on the volume and chemical nature of the waste, (2) information on the extent of contamination and the migration potential of the contaminants, (3) preliminary information on evaluation of alternative concepts that can or cannot be considered, and (4)supportive technical and cost data. For the purposes of identification, the following operational phases will be used for definition for this phase of the decommissioning and decontamination process (1) facility characterization before clean up, (2) characterization during clean up, (3) characterization of waste materials, and (4) site characterization after clean up. A key consideration in this process is the prevention of any waste to be generated from these characterization activities. The purpose of this checklist guide is to assist users with incorporating pollution prevention/waste minimization (PP/WM) in all FC phase projects of the Environmental Restoration (ER) Program. This guide will help users document PP/WM activities for technology transfer and reporting requirements. Automated computer screens will be created from the checklist data to assist users with implementing and evaluating waste reduction

  6. Environmental Restoration Program pollution prevention checklist guide for the surveillance and maintenance project phase

    International Nuclear Information System (INIS)

    1993-09-01

    DOE Order 5820.2 mandates that a surveillance and maintenance program be established in all shut-down facilities to ensure adequate containment of contamination, provide physical safety and security, and reduce potential public and environmental hazards. A key consideration in this process is the prevention of any waste to be generated from these activities. The purpose of this checklist guide is to assist the user with incorporating pollution prevention/waste minimization (PP/WM) in all Surveillance and Maintenance (S ampersand M) phase projects of the Environmental Restoration (ER) Program. This guide will help users document their PP/WM activities for technology transfer and reporting requirements. Automated computer screens will be created from the checklist data to assist users with implementing and evaluating waste reduction. Users can then establish numerical performance measures to measure progress in planning, training, self-assessments, field implementation, documentation, and technology transfer. Cost savings result as users train and assess themselves and perform preliminary waste assessments

  7. Method for screening prevention and control measures and technologies based on groundwater pollution intensity assessment

    Energy Technology Data Exchange (ETDEWEB)

    Li, Juan, E-mail: lijuan@craes.org.cn [College of Water Sciences, Beijing Normal University, Beijing 100875 (China); Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); State Environmental Protection Key Laboratory of Simulation and Control of Groundwater Pollution, Beijing, 100012 (China); Yang, Yang [College of Environment, Beijing Normal University, Beijing 100875 (China); Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); State Environmental Protection Key Laboratory of Simulation and Control of Groundwater Pollution, Beijing, 100012 (China); Huan, Huan; Li, Mingxiao [Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); State Environmental Protection Key Laboratory of Simulation and Control of Groundwater Pollution, Beijing, 100012 (China); Xi, Beidou, E-mail: xibd413@yeah.net [Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); State Environmental Protection Key Laboratory of Simulation and Control of Groundwater Pollution, Beijing, 100012 (China); Lanzhou Jiaotong University, Lanzhou 730070 (China); Lv, Ningqing [Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); State Environmental Protection Key Laboratory of Simulation and Control of Groundwater Pollution, Beijing, 100012 (China); Wu, Yi [Guizhou Academy of Environmental Science and Designing, Guizhou 550000 (China); Xie, Yiwen, E-mail: qin3201@126.com [School of Chemical and Environmental Engineering, Dongguan University of Technology, Dongguan, 523808 (China); Li, Xiang; Yang, Jinjin [Chinese Research Academy of Environmental Sciences, Beijing 100012 (China); State Environmental Protection Key Laboratory of Simulation and Control of Groundwater Pollution, Beijing, 100012 (China)

    2016-05-01

    This paper presents a system for determining the evaluation and gradation indices of groundwater pollution intensity (GPI). Considering the characteristics of the vadose zone and pollution sources, the system decides which anti-seepage measures should be implemented at the contaminated site. The pollution sources hazards (PSH) and groundwater intrinsic vulnerability (GIV) are graded by the revised Nemerow Pollution Index and an improved DRTAS model, respectively. GPI is evaluated and graded by a double-sided multi-factor coupling model, which is constructed by the matrix method. The contaminated sites are categorized as prior, ordinary, or common sites. From the GPI results, we develop guiding principles for preventing and removing pollution sources, procedural interruption and remediation, and end treatment and monitoring. Thus, we can select appropriate prevention and control technologies (PCT). To screen the technological schemes and optimize the traditional analytical hierarchy process (AHP), we adopt the technique for order preference by the similarity to ideal solution (TOPSIS) method. Our GPI approach and PCT screening are applied to three types of pollution sites: the refuse dump of a rare earth mine development project (a potential pollution source), a chromium slag dump, and a landfill (existing pollution sources). These three sites are identified as ordinary, prior, and ordinary sites, respectively. The anti-seepage materials at the refuse dump should perform as effectively as a 1.5-m-thick clay bed. The chromium slag dump should be preferentially treated by soil flushing and in situ chemical remediation. The landfill should be treated by natural attenuation technology. The proposed PCT screening approach was compared with conventional screening methods results at the three sites and proved feasible and effective. The proposed method can provide technical support for the monitoring and management of groundwater pollution in China. - Highlights: • An

  8. Method for screening prevention and control measures and technologies based on groundwater pollution intensity assessment

    International Nuclear Information System (INIS)

    Li, Juan; Yang, Yang; Huan, Huan; Li, Mingxiao; Xi, Beidou; Lv, Ningqing; Wu, Yi; Xie, Yiwen; Li, Xiang; Yang, Jinjin

    2016-01-01

    This paper presents a system for determining the evaluation and gradation indices of groundwater pollution intensity (GPI). Considering the characteristics of the vadose zone and pollution sources, the system decides which anti-seepage measures should be implemented at the contaminated site. The pollution sources hazards (PSH) and groundwater intrinsic vulnerability (GIV) are graded by the revised Nemerow Pollution Index and an improved DRTAS model, respectively. GPI is evaluated and graded by a double-sided multi-factor coupling model, which is constructed by the matrix method. The contaminated sites are categorized as prior, ordinary, or common sites. From the GPI results, we develop guiding principles for preventing and removing pollution sources, procedural interruption and remediation, and end treatment and monitoring. Thus, we can select appropriate prevention and control technologies (PCT). To screen the technological schemes and optimize the traditional analytical hierarchy process (AHP), we adopt the technique for order preference by the similarity to ideal solution (TOPSIS) method. Our GPI approach and PCT screening are applied to three types of pollution sites: the refuse dump of a rare earth mine development project (a potential pollution source), a chromium slag dump, and a landfill (existing pollution sources). These three sites are identified as ordinary, prior, and ordinary sites, respectively. The anti-seepage materials at the refuse dump should perform as effectively as a 1.5-m-thick clay bed. The chromium slag dump should be preferentially treated by soil flushing and in situ chemical remediation. The landfill should be treated by natural attenuation technology. The proposed PCT screening approach was compared with conventional screening methods results at the three sites and proved feasible and effective. The proposed method can provide technical support for the monitoring and management of groundwater pollution in China. - Highlights: • An

  9. Method for screening prevention and control measures and technologies based on groundwater pollution intensity assessment.

    Science.gov (United States)

    Li, Juan; Yang, Yang; Huan, Huan; Li, Mingxiao; Xi, Beidou; Lv, Ningqing; Wu, Yi; Xie, Yiwen; Li, Xiang; Yang, Jinjin

    2016-05-01

    This paper presents a system for determining the evaluation and gradation indices of groundwater pollution intensity (GPI). Considering the characteristics of the vadose zone and pollution sources, the system decides which anti-seepage measures should be implemented at the contaminated site. The pollution sources hazards (PSH) and groundwater intrinsic vulnerability (GIV) are graded by the revised Nemerow Pollution Index and an improved DRTAS model, respectively. GPI is evaluated and graded by a double-sided multi-factor coupling model, which is constructed by the matrix method. The contaminated sites are categorized as prior, ordinary, or common sites. From the GPI results, we develop guiding principles for preventing and removing pollution sources, procedural interruption and remediation, and end treatment and monitoring. Thus, we can select appropriate prevention and control technologies (PCT). To screen the technological schemes and optimize the traditional analytical hierarchy process (AHP), we adopt the technique for order preference by the similarity to ideal solution (TOPSIS) method. Our GPI approach and PCT screening are applied to three types of pollution sites: the refuse dump of a rare earth mine development project (a potential pollution source), a chromium slag dump, and a landfill (existing pollution sources). These three sites are identified as ordinary, prior, and ordinary sites, respectively. The anti-seepage materials at the refuse dump should perform as effectively as a 1.5-m-thick clay bed. The chromium slag dump should be preferentially treated by soil flushing and in situ chemical remediation. The landfill should be treated by natural attenuation technology. The proposed PCT screening approach was compared with conventional screening methods results at the three sites and proved feasible and effective. The proposed method can provide technical support for the monitoring and management of groundwater pollution in China. Copyright © 2015

  10. Pollution prevention and control procedure case study: an application for petroleum refineries.

    Science.gov (United States)

    Rodríguez, Encarnación; Martínez, Jose-Luis

    2005-06-01

    There is global environmental concern about the pollution from industries and other organizations that should not only be controlled but also prevented. Many alternatives are available to those in charge of environmental protection, but they should be able to draw on a systematic procedure to help implement prevention and control measures. At present, there are three immediate tasks: defining the objective of any environmental study, identifying the potential pollution sources, and selecting alternatives to these sources. However, it is necessary to evaluate these alternatives by using as large a number of criteria as possible and making them cumulative so as to enable the classification and selection of the best available techniques for each pollution source. The petroleum refining industry plays an important role in the developed economies and also has a potential for pollution generation that must be controlled. The best solution for all (i.e., petroleum companies, the public, and the environment) is pollution prevention, because this option will protect all of them and will also reduce costs in terms of lower raw materials consumption as well as reducing potential fines. The procedure we have presented in this article has been applied successfully.

  11. COMPUTER-AIDED SOLVENT DESIGN FOR POLLUTION PREVENTION: PARIS II

    Science.gov (United States)

    Solvent substitution is an attractive way of elijminating the use of regulated solvents because it usually does not require major chanages in existing processes, equipment or operations. Successful solvent substitution is dependent on finding solvents that are as effective or be...

  12. Integrated environmental assessment and pollution prevention in Vietnam: the case of anthracite production

    Energy Technology Data Exchange (ETDEWEB)

    Chinh, L.D.; Gheewala, S.H.; Bonnet, S. [King Mongkuts University of Technology at Thonburi, Bangkok (Thailand)

    2007-07-01

    Abstract: Using the concept of life cycle analysis, the whole life cycle of anthracite production in Vietnam was assessed and the environmental 'hot-spots' were identified. These include (I) dust pollution at coal transfer points or piles in storage; (ii) noise pollution resulting from the usage of heavy equipment, and (iii) high volume of acid and turbid mine water discharged into the environment. Pollution prevention and treatment options were identified and discussed in this study which consists of wet treatment of dust, planning, collection and treatment of mine water, planting of trees for dust and noise reduction as well as minimization of erosion. Some recommendations are made for pollution abatement from coal production and improvement of anthracite production in the region.

  13. Pollution prevention for cleaner air: EPA's air and energy engineering research laboratory

    International Nuclear Information System (INIS)

    Shaver, E.M.

    1992-01-01

    The article discusses the role of EPA's Air and Energy Engineering Research Laboratory (AEERL) in pollution prevention research for cleaner air. For more than 20 years, AEERL has been conducting research to identify control approaches for the pollutants and sources which contribute to air quality problems. The Laboratory has successfully developed and demonstrated cost-effective sulfur dioxide, nitrogen oxides, and particulate control technologies for fossil fuel combustion sources. More recently, it has expanded its research activities to include indoor air quality, radon, organic control, stratospheric ozone depletion, and global warming. AEERL also develops inventories of air emissions of many types. Over the last several years, it has made substantial efforts to expand research on pollution prevention as the preferred choice for air emissions reduction

  14. 15 CFR 291.4 - National industry-specific pollution prevention and environmental compliance resource centers.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false National industry-specific pollution prevention and environmental compliance resource centers. 291.4 Section 291.4 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAM...

  15. Effects of the integrated pollution prevention and control directive on environmental protection

    Energy Technology Data Exchange (ETDEWEB)

    Kat, W. [Corus Staal BV, Evironmental Manangement Dept. (Netherlands)

    2005-06-01

    The Integrated Pollution Prevention and Control Directive (IPPC) published in the EU in 1996 is presented within an approach based on source-targeted measures. The Directive implementation is based on the granting of permits and it introduces new concepts like Best Available Technique (BAT), Best Reference Document (BREF) and Level Playing Field (LPF). The consequences for the EU steel industry are discussed. (author)

  16. Information processing to determine waste minimization/pollution prevention strategies in the petroleum industry

    Energy Technology Data Exchange (ETDEWEB)

    Falcon, Mariali F. de [CORPOVEN, S.A. (Venezuela)

    1993-12-31

    With the passage of the 1984 Hazardous and Solid Waste Amendments to the Resource Conservation and Recovery Act in the United States, industries, and particularly the petroleum industry, have become more interested in their waste management practices. This works aims to present a methodology to organize the collected data concerning waste minimization and, or, pollution prevention in the petroleum industry into a bibliographic database

  17. Oak Ridge K-25 Site chlorinated solvent pollution prevention opportunity assessment

    International Nuclear Information System (INIS)

    1994-08-01

    A pollution prevention opportunity assessment (PPOA) was conducted at the Oak Ridge K-25 Site to identify opportunities to reduce and better manage the use of chlorinated solvents. At the K-25 Site, 67 control areas were examined for their potential use of chlorinated solvents. Of these areas, 27 were found to be using (1) chlorinated solvents for cleaning, degreasing, and lubricating; (2) laboratory standards and solvents; and (3) test medium. Current management practices encourage the identification and use of nonhazardous chemicals, including the use of chlorinated solvents. The main pollution prevention principles are source reduction and recycling, and a number of pollution prevention options based on these principles were identified and evaluated as part of this chlorinated solvent PPOA. Source reduction options evaluated for the K-25 Site include the substitution of chlorinated solvents with nonchlorinated solvents. Recycling was identified for those areas that would benefit most from the reuse of the chlorinated solvents in use. The pollution prevention options that offer the greatest opportunity for success at the K-25 Site are the implementation of substitutes at the 10 control areas using chlorinated solvents for cleaning, degreasing, and lubrication. A change in the process may be all that is needed to eliminate the use of a chlorinated solvent. Once a decision is made to implement a substitution, the information should be communicated to all shops and laboratories. Another option to consider is the installation of recycling units to recycle the large amounts of methylene chloride used in the analytical sampling procedure

  18. Oak Ridge K-25 Site chlorinated solvent pollution prevention opportunity assessment

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    A pollution prevention opportunity assessment (PPOA) was conducted at the Oak Ridge K-25 Site to identify opportunities to reduce and better manage the use of chlorinated solvents. At the K-25 Site, 67 control areas were examined for their potential use of chlorinated solvents. Of these areas, 27 were found to be using (1) chlorinated solvents for cleaning, degreasing, and lubricating; (2) laboratory standards and solvents; and (3) test medium. Current management practices encourage the identification and use of nonhazardous chemicals, including the use of chlorinated solvents. The main pollution prevention principles are source reduction and recycling, and a number of pollution prevention options based on these principles were identified and evaluated as part of this chlorinated solvent PPOA. Source reduction options evaluated for the K-25 Site include the substitution of chlorinated solvents with nonchlorinated solvents. Recycling was identified for those areas that would benefit most from the reuse of the chlorinated solvents in use. The pollution prevention options that offer the greatest opportunity for success at the K-25 Site are the implementation of substitutes at the 10 control areas using chlorinated solvents for cleaning, degreasing, and lubrication. A change in the process may be all that is needed to eliminate the use of a chlorinated solvent. Once a decision is made to implement a substitution, the information should be communicated to all shops and laboratories. Another option to consider is the installation of recycling units to recycle the large amounts of methylene chloride used in the analytical sampling procedure.

  19. POLLUTION PREVENTION CASE STUDIES: LOW-VOC/HAP WOOD FURNITURE COATINGS

    Science.gov (United States)

    This article provides a brief profile of the wood furniture industry, discusses pollution prevention activities typically implemented, describes the four low-VOC/HAP coating technologies studied. and summarizes one case study for each of the low-VOC/HAP coating yechnologies inves...

  20. Information processing to determine waste minimization/pollution prevention strategies in the petroleum industry

    Energy Technology Data Exchange (ETDEWEB)

    Falcon, Mariali F. de [CORPOVEN, S.A. (Venezuela)

    1994-12-31

    With the passage of the 1984 Hazardous and Solid Waste Amendments to the Resource Conservation and Recovery Act in the United States, industries, and particularly the petroleum industry, have become more interested in their waste management practices. This works aims to present a methodology to organize the collected data concerning waste minimization and, or, pollution prevention in the petroleum industry into a bibliographic database

  1. Special issue review of pollution prevention management within the Department of Energy, final report

    International Nuclear Information System (INIS)

    1994-08-01

    The Department of Energy's (DOE) national role and overall mission has been undergoing significant change. In the post-Cold War era, a new emphasis on cleaning up the wastes from the past has emerged. These changes provide both significant challenges as well as new opportunities for DOE. While the challenges may seem overwhelming as DOE realizes the magnitude of its environmental problems, its network of national laboratories and sites provide the resources to become a leader in environmental management through the development of new technologies and management practices. Because of the growing importance of pollution prevention in the United States and more specifically to DOE's environmental management strategy, the Office of Environmental Audit (EH-24) identified this as an area worthy of a Special Issue Review. A Special Issue Review is not an audit but rather an in-depth review of key environmental programs or activities which cut across organizational boundaries. The purpose of a Special Issue Review is to identify strengths and weaknesses of a program as well as significant crosscutting issues or challenges that are important to the future success of that program. The scope of the review included an assessment of pollution prevention program activities at Headquarters, selected operations offices, and selected sites offices and contractor organizations. All aspects of a pollution prevention program were considered including program strategy, infrastructure, management systems, and implementation practices. Also summarized are future pollution prevention challenges and recommendations

  2. REPORT TO CONGRESS: ASSESSMENT OF INTERNATIONAL AIR POLLUTION PREVENTION AND CONTROL TECHNOLOGY VOLUME 1. EXECUTIVE SUMMARY

    Science.gov (United States)

    The report gives results of a study that identifies new and innovative air pollution prevention and/or control technologies, of selected industrialized countries, that are not currently used extensively in the U.S. The technologies may be entirely new to the U.S., or they may be ...

  3. European model code of safe practice for the prevention of ground and surface water pollution by oil from storage tanks and during the transport of oil

    Energy Technology Data Exchange (ETDEWEB)

    1974-01-01

    The code outlines general requirements for pollution prevention and provides guidelines for corrosion protection of mild steel tanks, pipe and fitting assemblies, and for storage tank installations. The transportation and delivery of petroleum fuels are discussed, and operating procedures are suggested.

  4. Air pollution prevention manual on emission monitoring. 2. rev. ed.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-08-15

    The Manual on Emission Monitoring covers the need for information about the national practice in the field of emission control at plants, requiring official approval. The legal bases for discontinuous and continuous measurements for emission control at plants, requiring official approval, are treated. Thereby also the European environmental legislation is considered. The publication procedure for testing institutes, which execute such measurements, is described. The execution of discontinuous emission measurements (course of the measurement and measurement requests) and for continuous emission measurement (suitability test, installation, maintenance, functional test and calibration of the automated measuring system) including the evaluation and documentation of the measured values is described. The procedure of remote emission monitoring is explained. The most important measuring procedures (continuous and discontinuous) are reported. The guide also includes an up-to-date list of tested and appropriate measurement devices. Such tested measuring devices are described by their manufacturers. Indications are given as to how the devices function together with their technical data (e. g. parameters from the suitability test). (orig.)

  5. Best management practices to reduce and prevent water pollution with herbicides from run-off and erosion

    Directory of Open Access Journals (Sweden)

    Gehring, Klaus

    2014-02-01

    Full Text Available The natural phenomenon of run-off and erosion lead to unpreventable pesticide water pollution in case of extreme weather conditions. In this relationship the use of herbicides involves a higher risk than other pesticides because of the specific terms of application. Directive 2009/128/EC for the sustainable use of pesticides aspires to enhanced water protection. German national action plan contains quantitative objectives which require strong reduction of water pollution by run-off and erosion of pesticides and accordingly herbicides. The European TOPPS prowadis project developed a consolidated and basic diagnosis concept for the first time to determine the field specific run-off risk. Compatible mitigation measures were linked to specific risk scenarios. Risk diagnosis and suitable mitigation measures determine best management practices for the prevention of run-off and erosion. Different new diagnosis methods and the implementation are presented. Further documents and information are available on the web [http://www.topps-life.org/].

  6. Air Pollution and Allergic Airway Diseases: Social Determinantsand Sustainability in the Control and Prevention.

    Science.gov (United States)

    Paramesh, H

    2018-04-01

    Air pollution, global warming and climate change are the major contributing factors in causing the increase prevalence of allergic airway diseases like asthma and allergic rhinitis and they will be the defining issues for health system in the twenty-first century. Asthma is an early onset non-communicable environmental disease with global epidemic and contributes a greatest psycho socio economic burden. Nearly 8 million global deaths are from air pollution. Over one billion population are the sufferers during 2015 and will increase to 4 billion by 2050. Air pollution not only triggers the asthma episodes but also changes the genetic pattern in initiating the disease process. Over the years our concept of management of allergic airway disease has changed from control of symptoms to prevention of the disease. To achieve this we need positive development on clean air policies with standard norms, tracking progress, monitoring and evaluation, partnership and conventions with local and global authorities. We do have challenges to overcome like rapid urbanization, lack of multisectorial policy making, lack of finance for research and development and lack of monitoring exposure to health burden from air pollution. We need to prioritize our strategy by sustainable, safe, human settlement, cities, sustainable energy, industrialization, and research. The measures to be adopted are highlighted in this review article. With effective measures by all stake holders we can reduce air pollution and prevent the global warming by 2030, along with 194 countries as adopted by WHO in May 2015.

  7. Prevention and Control of Air Pollution in China: A Research Agenda for Science and Technology Studies

    OpenAIRE

    Hernandez, Rodolfo Andres

    2016-01-01

    China’s air pollution has reached a critical state, and is characterized by heavy coal smoke and a wide presence of ozone and particulate matter (PM2.5). From 2011, through the 12th five year plan, the prevention and control of air pollution entered a new ‘transition stage’ guided by the principles of sustainability and energy conservation, and also intensified by pressure from the society. This article is divided into two parts: first, it introduces the most important changes, problems and a...

  8. Pollution prevention in the oil and soap industry: a case study

    Energy Technology Data Exchange (ETDEWEB)

    Abou-Elela, S.I. [National Research Center, Gizza (Egypt). Water Pollution Control Dept.; Zaher, F. [National Research Center, Gizza (Egypt). Fats and Oil Dept.

    1998-12-31

    Industrial audit of a complex oil and soap factory has been carried out. The factory produces edible oils, fatty acids, soap, crude, industrial and pharmaceutical glycerin, powdered detergents, animal fodder, sodium and potassium silicates, sodium hypochlorite and hypochloric acid. The audit shows that there were a wide range of pollution prevention opportunities which could be implemented with significant financial advantages for the factory as well as reducing environmental pollution. Cost benefits for the recommended environmental improvements have been estimated. Many of the improvements had short payback periods. (author)

  9. Pollution prevention in the oil and soap industry: a case study

    International Nuclear Information System (INIS)

    Abou-Elela, S.I.; Zaher, F.

    1998-01-01

    Industrial audit of a complex oil and soap factory has been carried out. The factory produces edible oils, fatty acids, soap, crude, industrial and pharmaceutical glycerin, powdered detergents, animal fodder, sodium and potassium silicates, sodium hypochlorite and hypochloric acid. The audit shows that there were a wide range of pollution prevention opportunities which could be implemented with significant financial advantages for the factory as well as reducing environmental pollution. Cost benefits for the recommended environmental improvements have been estimated. Many of the improvements had short payback periods. (author)

  10. Macro impact of the law on prevention and control of atmospheric pollution on power industry development

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Z. [State Power Corporation (China). Dept. of Science, Technology and Environment

    2001-07-01

    The newly revised and enlarged main contents of China's Law of Prevention and Control of Atmospheric Pollution, which came into force on 1 September 2000, are described. The macro impacts of the law on the power industry development are analyzed mainly in respect to power demand and readjustment of power structure and layout, clean production and pollution control level, scientific management of environmental protection, in accordance with law as well as changes of construction and operation costs. Several questions worthy to be noted in course of implementation of the new law are enumerated. 1 tab.

  11. Environmental restoration program pollution prevention checklist guide for the evaluation of alternatives project phase

    International Nuclear Information System (INIS)

    1993-09-01

    Evaluation of alternative studies determine what decontamination and decommissioning (D ampersand D) alternatives are presented to regulators for facility and site cleanup. A key consideration in this process is the waste to be generated. Minimizing the volume and toxicity of this waste will ultimately contribute to the selection of the best clean-up option. The purpose of this checklist guide is to assist the user with incorporating pollution prevention/waste minimization (PP/WM) in all Evaluation of Alternatives (EV) phase projects of the Environmental Restoration (ER) Program. This guide will assist users with documenting PP/WM activities for technology transfer and reporting requirements. Automated computer screens will be created from the checklist data to help users implement and evaluate waste reduction. Users can then establish numerical performance measures to measure progress in planning, training, self-assessments, field implementation, documentation, and technology transfer. Cost savings result as users train and assess themselves, eliminating expensive process waste assessments and audit teams

  12. Pollution

    NARCIS (Netherlands)

    Dürr, E.; Jaffe, R.; Nonini, D.M.

    2014-01-01

    This essay points to the role of pollution in understanding the social construction of hierarchies and urban space. Conceptualizations of pollution and approaches to waste management always reflect the Zeitgeist and tend to be politically charged. We argue that an ethnographic approach to pollution

  13. Amoco/Environmental Protection Agency Pollution Prevention Project, Yorktown refinery. Refinery release inventory. Final report

    International Nuclear Information System (INIS)

    Klee, H.; Kizier, G.J.; Baloo, S.; Hockman, E.L.; Couzens-Roberts, C.

    1992-07-01

    The report volume summarizes physical data obtained during a 2-year pollution prevention study of Amoco Oil Company's Yorktown Virginia Refinery. The study was jointly sponsored as a cooperative effort of Amoco Corporation and the United States Environmental Protection Agency. A multi-media sampling program was used to identify potential pollution sources within the Refinery. Sampling and analysis included air, surface water, groundwater, and solid waste data. Public perceptions about environmental issues of concern in the vicinity of the Refinery were also surveyed. The inventory showed that nearly 99 percent of the releases were airborne at the facility. Most of the remainder involved land disposal of solid wastes. Specific sources of major pollutants are identified

  14. Amoco-US Environmental Protection Agency, pollution prevention project, Yorktown, Virginia: Solid waste data

    International Nuclear Information System (INIS)

    Kizior, G.J.

    1991-01-01

    In late 1989 Amoco and the US Environmental Protection Agency initiated a joint project to review pollution prevention alternatives at Amoco Oil Company's Yorktown, Virginia, Refinery as a case study site. The report summarizes the solid waste emissions inventory, solids source identification, and the solid waste sampling program that was conducted at the Amoco Yorktown Refinery on September 25-27, 1990, in support of the Pollution Prevention Project. Major findings showed that the majority of solid waste generation occurs as end-of-pipe solids resulting from the treatment of wastewaters from the refinery sewer. Based on a regression analysis of the composition data for samples collected during this project, major upstream contributors to these solids appear to be soils. Solids from process units are also significant contributors

  15. Waste minimization/pollution prevention study of high-priority waste streams

    International Nuclear Information System (INIS)

    Ogle, R.B.

    1994-03-01

    Although waste minimization has been practiced by the Metals and Ceramics (M ampersand C) Division in the past, the effort has not been uniform or formalized. To establish the groundwork for continuous improvement, the Division Director initiated a more formalized waste minimization and pollution prevention program. Formalization of the division's pollution prevention efforts in fiscal year (FY) 1993 was initiated by a more concerted effort to determine the status of waste generation from division activities. The goal for this effort was to reduce or minimize the wastes identified as having the greatest impact on human health, the environment, and costs. Two broad categories of division wastes were identified as solid/liquid wastes and those relating to energy use (primarily electricity and steam). This report presents information on the nonradioactive solid and liquid wastes generated by division activities. More specifically, the information presented was generated by teams of M ampersand C staff members empowered by the Division Director to study specific waste streams

  16. Prevention and Control of Agricultural Non-Point Source Pollutions in UK and Suggestions to China

    OpenAIRE

    Liu, Kun; Ren, Tianzhi; Wu, Wenliang; Meng, Fanquiao; Bellarby, Jessica; Smith, Laurence

    2016-01-01

    Currently, the world is facing challenges of maintaining food production growth while improving agricultural ecological environmental quality. The prevention and control of agricultural non-point source pollution, a key component of these challenges, is a systematic program which integrates many factors such as technology and its extension, relevant regulation and policies. In the project of UK-China Sustainable Agriculture Innovation Network, we undertook a comprehensive analysis of the prev...

  17. Benzimidazole for the prevention of toxic effects of air pollutants on plants

    Energy Technology Data Exchange (ETDEWEB)

    Takaoka, I; Fukuda, M; Kitano, H; Shinohara, T

    1974-02-02

    Tobacco plants were sprayed with benzimidazole before being exposed to 30 ppM of photochemical oxidants for a period of two hours. The plants were observed 48 hours after exposure and found to have suffered no toxic effects from the oxidants. It may be concluded that benzimidazole is an effective agent for preventing the toxic effects of air pollutants, such as photochemical oxidants on plants.

  18. Educational understanding of pollution prevention in decontamination and decommissioning/environmental restoration activities

    International Nuclear Information System (INIS)

    Betsch, M.D.; Lewis, R.A.

    1995-05-01

    Demolishing outdated structures from the US Department of Energy Hanford Site in Washington, generates large quantities of waste which can be minimized. The Hanford cleanup is one of the world's largest and most complex environmental restoration efforts. Approximately 280 square miles of ground water and soil are contaminated; there are more than 80 surplus facilities, including nine shut-down nuclear reactors in various stages of decay; and there are 177 underground waste storage tanks containing highly radioactive waste. In all, 1,500 cleanup sites have been identified and the Environmental Restoration Contractor (ERC) is currently responsible for surveillance and maintenance of 170 structures. A two hour orientation training in pollution prevention was developed by the Westinghouse Hanford Company to provide all Decontamination and Decommissioning/Environmental Restoration (D ampersand D/ER) personnel with the knowledge to apply waste minimization principles during their cleanup activities. The ERC Team Pollution Prevention Workshop serves to communicate pollution prevention philosophies and influences the way D ampersand D/ER projects are conducted at the Hanford Site

  19. An investigation of air emission levels from distinct iron and steel production processes with the adoption of pollution control and pollution prevention alternatives

    International Nuclear Information System (INIS)

    Costa, M.M.; Schaeffer, R.

    1999-01-01

    This paper aims to investigate environmental aspects from different iron and steel production processes. A methodology based on material flows is developed in order to verify some air emission levels attained by Pollution Control and Pollution Prevention alternatives. The data basis for modeling energy and materials flows in iron and steel production is obtained from a literature review on different technological processes, energy and materials consumption and pollutant releases to the environmental Modeling combines both process analysis and input-output techniques to simulate the different iron and steel production routes and to estimate the resulting total atmospheric pollution releases based on air emission factors for several pollutants by each production step. Processes examined include: (1) Conventional Integrated (100% ore-based and partly scrap-based); (2) Mini-mill with EAF (100% scrap-based and partly DRI-based); and (3) New Integrated based on the COREX smelting reduction process. Among the alternatives considered for air emissions reductions are those related to Pollution Control (mainly gas cleaning systems) and to Pollution Prevention (change/reduction in input materials, operational procedures and housekeeping improvements, on-site recycling and technology innovations and modifications). Results indicate higher air pollution intensity for the Conventional Integrated Route over the Mini-mill with EAF and COREX smelting reduction processes, though pointing out that final figures are strongly affected by the systems' boundaries and the different air emission levels of each production step

  20. MANUAL: BEST MANAGEMENT PRACTICES FOR POLLUTION PREVENTION IN THE SLABSTOCK AND MOLDED FLEXIBLE POLYURETHANE FOAM INDUSTRY

    Science.gov (United States)

    The 1990 Clean Air Act Amendments require EPA to develop standards for major emission sources of 189 hazardous air pollutants (HAPs). EPA has identified the flexible polyurethane foam industry as a large emitter of HAPs and has slated the industry for regulation under Title III, ...

  1. Preliminary tests of an electrokinetic barrier to prevent heavy metal pollution of soils

    International Nuclear Information System (INIS)

    Lynch, R.J.; Muntoni, A.; Ruggeri, R.; Winfield, K.C.

    2007-01-01

    Sardinia has to deal with significant environmental problems related to heavy-metal contamination, mainly located at its abandoned mining districts. In particular, acid mine drainage management and groundwater pollution are typical problems associated with mining activities which constitute a serious threat to human health. To prevent contaminant spread over the adjacent environment, it is of great interest to consider using an electric field as a containment fence to counteract pollutant transport. In this application, contaminant transport due to a hydraulic gradient driving force is prevented by the combined effect of electro-osmosis and electro-migration. Although there are other alternative containment technologies, the electrokinetic fence offers many advantages, as it is easy to operate, there is a minimal exposure to the operating personnel and it is likely to be effective for a wide range of contaminants. In this work, both one-dimensional (1D) and two-dimensional (2D) tests have been carried out. In the 1D tests, the efficiency of an electrokinetic barrier to prevent cadmium from polluting an uncontaminated sample was investigated; soil pH, metal concentration and current intensity have been monitored; results indicate that the barrier can prevent or significantly reduce heavy-metal contamination from spreading against a hydraulic gradient of 7. In 2D tests, two rows of electrodes inserted in a horizontally flat soil tank were used to generate an electric field. It was found that an electric field of 125 V m -1 was sufficient to prevent significant copper incursion from a contaminant flow under a hydraulic gradient of 1.3

  2. Study on the relationship between the opening of environmental tax and the prevention and control of air pollution in China

    Science.gov (United States)

    Gao, Guilin; Wang, Tianyi

    2018-03-01

    This article systematically expounds the status quo and sources of air pollution, the experience of foreign environmental tax policy, the advantages and disadvantages of environmental taxes levied in our country through literature research, historical analysis and comparative analysis and put forward recommendations on tax policy of prevention and control of air pollution by combining with the specific national conditions in our country. As one of the basic means of national macro-control, the tax policy is the major countermeasure that cannot be ignored in the prevention and control of air pollution. Studying the tax policy of prevention and control of air pollution will help to effectively control air pollution, develop a green economy and recycle economy and achieve the goal of improving environmental quality.

  3. Identifying inequitable exposure to toxic air pollution in racialized and low-income neighbourhoods to support pollution prevention

    Directory of Open Access Journals (Sweden)

    Suzanne Kershaw

    2013-05-01

    Full Text Available Numerous environmental justice studies have confirmed a relationship between population characteristics such as low-income or minority status and the location of environmental health hazards. However, studies of the health risks from exposure to harmful substances often do not consider their toxicological characteristics. We used two different methods, the unit-hazard and the distance-based approach, to evaluate demographic and socio-economic characteristics of the population residing near industrial facilities in the City of Toronto, Canada. In addition to the mass of air emissions obtained from the national pollutant release inventory (NPRI, we also considered their toxicity using toxic equivalency potential (TEP scores. Results from the unit-hazard approach indicate no significant difference in the proportion of low-income individuals living in host versus non-host census tracts (t(107 = 0.3, P = 0.735. However, using the distance-based approach, the proportion of low-income individuals was significantly higher (+5.1%, t(522 = 6.0, P <0.001 in host tracts, while the indicator for “racialized” communities (“visible minority” was 16.1% greater (t(521 = 7.2, P <0.001 within 2 km of a NPRI facility. When the most toxic facilities by non-carcinogenic TEP score were selected, the rate of visible minorities living near the most toxic NPRI facilities was significantly higher (+12.9%, t(352 = 3.5, P = 0.001 than near all other NPRI facilities. TEP scores were also used to identify areas in Toronto that face a double burden of poverty and air toxics exposure in order to prioritise pollution prevention.

  4. POLLUTION PREVENTION OPPORTUNITY ASSESSMENT OF THE UNITED STATES ARMY CORPS OF ENGINEERS GARRISON DAM HYDRO- ELECTRIC POWERPLANT - RIVERDALE, NORTH DAKOTA

    Science.gov (United States)

    The report describes the results of pollution prevention opportunity assessments conducted at a representative U.S. Army Corps of Engineers civil works dam and hydroelectric power plant. ecommended methods for reducing pollution resulting primarily from the operation of these fac...

  5. EVALUATION OF A PORTABLE FOURIER TRANSFORM INFRARED GAS ANALYZER FOR MEASUREMENTS OF AIR TOXICS IN POLLUTION PREVENTION RESEARCH

    Science.gov (United States)

    A portable Fourier transform infrared gas analyzer with a photoacoustic detector performed reliably during pollution prevention research at two industrial facilities. It exhibited good agreement (within approximately 6%) with other analytical instruments (dispersive infrared and ...

  6. Report: EPA Needs Accurate Data on Results of Pollution Prevention Grants to Maintain Program Integrity and Measure Effectiveness of Grants

    Science.gov (United States)

    Report #15-P-0276, September 4, 2015. Inaccurate reporting of results misrepresents the impacts of pollution prevention activities provided to the public, and misinforms EPA management on the effectiveness of its investment in the program.

  7. Amoco-US Environmental Protection Agency, pollution prevention project, Yorktown, Virginia: Surface water data

    International Nuclear Information System (INIS)

    Baloo, S.

    1991-08-01

    The report summarizes the surface water sampling program at the Amoco Refinery at Yorktown, Virginia. This was undertaken as a part of the joint project between Amoco Corporation and the United States Environmental Protection Agency to review pollution prevention alternatives at a petroleum refinery. The surface water data provides a snapshot of surface water pollutant generation and discharge from the refinery. Different process units contribute to the total wastewater flow of 460 GPM in the refinery. Water in the ditch system, which is non-process water, is free of organic contamination. Oil and grease, phenols, ammonia and sulfides are the significant components measured in the process wastewater. The concentrations of organics in most water streams leaving the individual process units are relatively low, in the 1-5 parts per million (ppm) range. A few individual streams such as the crude desalter brine and tank water draws have high pollutant loadings. Concentrations of metals in the refinery wastewater are very low. The wastewater treatment plant is very effective in reducing the pollutant loading in the water with overall removal efficiencies greater than 99% for most organics and inorganics

  8. [Analysis and prevention of dust pollution caused by 5 common prosthetic materials].

    Science.gov (United States)

    Yang, Xiang-Wen; Wei, Bin; Zhu, Cao-Yun; Qian, Liang; Li, Yi-Han

    2017-10-01

    To analyze and evaluate dust pollution in prosthodontic clinic and make proposal for reasonable protection. This study analyzed the particle size, element composition and dust concentration of 5 materials which were commonly used in dental restorations (veneering ceramics, cobalt-chromium alloy, photosensitive plastic, hard base resin, advanced artificial teeth) by using scanning electron microscopy (SEM), X-ray energy dispersive spectrometer(EDS) and dust concentration laser tester, in order to assess the effects of prosthodontic dust posed on medical staff health and put forward reasonable suggestions for prevention and control of dust pollution. The particle size of veneering ceramics, cobalt-chromium alloy, photosensitive plastic, hard base resin and advanced artificial teeth was (2.15±3.00), (33.78±24.33), (7.78±11.86), (31.16±44.35) and (28.45±39.21)μm, respectively. The time weighted average respirable dust concentration of veneering ceramics was 0.393 mg/m 2 which was beyond the scope of national security. Dust pollution is serious in prosthodontic clinic to which we should pay more attention and take appropriate prevention measures.

  9. Integrated pollution prevention and control for heavy ceramic industry in Galicia (NW Spain).

    Science.gov (United States)

    Barros, M C; Bello, P; Roca, E; Casares, J J

    2007-03-22

    The heavy ceramic industry (building materials and refractory products manufacture) is an important source of pollutants to the environment. For this reason these industrial sub-sectors are included in prevention and control pollution policies, specifically those of the European Union. The IPPC Directive pays particular attention to the mineral industries, not least to the ceramic industry (epigraph 3.5, Annex I). In this paper, a methodology which is being applied to support IPPC installations and the competent administrative authority in Galicia (NW Spain) is presented. For that, the Galician heavy ceramic industry is analysed, as also are the ways to study the Best Available Techniques (BAT) with a view to establishing the emission limit values (ELV) for each specific case. Hence, a technological state of the art has been carried out for both sub-sectors, from the point of view of implementation of the IPPC in Galicia. Following this, the processes are described briefly and an analysis of the consumption and emission levels of the main pollutants is made. An inventory that includes the best environmental practices and the preventive and abatement candidate techniques as BAT was elaborated for both considered sub-sectors. An information data sheet for each candidate BAT is presented as a method to help both the industries and the competent authority to identify a candidate technique of the inventory as BAT. Three illustrative examples of the application of this procedure are presented for different emissions to environmental media for Galician installations.

  10. Environmental Restoration Program pollution prevention performance measures for FY 1993 and 1994 remedial investigations: Generator training manual

    International Nuclear Information System (INIS)

    1993-03-01

    This computer-based program is designed to help waste generators in the Environmental Restoration (ER) Program prevent pollution at the DOE Oak Ridge Field Office (DOE-OR) facilities in Oak Ridge, Paducah, and Portsmouth. The Numerical Scoring System (NSS) is an interactive system designed to maintain data on ER Program pollution prevention efforts and to measure the success of these efforts through the ER Program life cycle

  11. Environmental Restoration Program pollution prevention performance measures for FY 1993 and 1994 remedial investigations: Management training manual

    International Nuclear Information System (INIS)

    1993-03-01

    This computer-based program is designed to help waste generators in the Environmental Restoration (ER) Program prevent pollution at the DOE Oak Ridge Field Office (DOE-OR) facilities in Oak Ridge, Paducah, and Portsmouth. The Numerical Scoring System (NSS) is an interactive system designed to maintain data on ER Program pollution prevention efforts and to measure the success of these efforts through the ER Program life cycle

  12. Environmental engineering and pollution prevention. European network of excellence and partnership

    International Nuclear Information System (INIS)

    Wotte, J.; Halang, W.A.; Kraemer, B.J.

    1996-01-01

    The primary purpose of the workshop was to present and discuss the main goals, contents, projects, partners, and implications of a proposed non-profit European Research Network, which aims at establishing research nodes at key locations in European NATO and CP countries. All projects are directed to solutions for the heavily polluted 'Black Triangle' Bohemia, Saxony, and Silesia, which was selected as a nucleus for the network because of its geographical location and cross-border environmental problems. Papers are presented under the following subject headings: disarmament; environment; human resources; high technology; and health. They include papers on soil remediation at manufactured gas plants, and power generation in the Czech Republic and its contribution to air pollution prevention in Central Europe

  13. Pollution prevention at a profit in the production of iron and steel

    International Nuclear Information System (INIS)

    Fine, H.A.; Molbug, J.; Gorsevski, V.; Briskin, J.; Worrell, E.; Price, L.; Martin, N.

    1997-01-01

    Many different processes and flow sheets exist for the production of iron and steel. These individual processes and process combinations consume differing amounts of energy and result in differing carbon dioxide emissions, greatly complicating evaluation of new, energy conserving technologies. Not only does a large array of competing energy saving technologies exist, but these technologies must be applied to this diverse set of production facilities. A methodology now under development for performing a multiple pathways analysis that characterizes both energy usage and carbon emissions is described in this article. This methodology can examine multiple options at each step in the process for the production of iron and steel, and the potential economic and pollution prevention opportunities that each may have. A first order estimate of the role of energy and materials conservation in returning historical investment is also provided, demonstrating past pollution prevention at a profit. Finally, a preliminary analysis of selected strategies for further prevention at a profit in the production of iron and steel is provided

  14. Economic analysis of the CLC/FC regime as an oil pollution prevention instrument

    International Nuclear Information System (INIS)

    Hay, J.

    2006-09-01

    The aim of this research is to discuss the effectiveness of CLC/IOPC (Civil Liability Convention) liability regime in the field of oil pollution prevention. This study is mainly carried out from a law and economics perspective, although reference is also made to the economic analysis of international environmental agreements. The first two chapters explore the deterrent potential of the international regime in terms of oil spill prevention, from a theoretical and empirical perspective. The analysis of the effectiveness of the regime as such consists in, on the one hand, considering the ability of the international regime to compensate the entire social costs of oil spills (chapter 3) and, on the other hand, to examine the incentives given to operators in maritime oil transport to prevent accidental pollution (chapters 4 and 5). Sixth chapter considers the impacts of the voluntary nature of the international regime on its deterrent potential. The results obtained from this analysis enable to identify several mechanisms by which the deterrent effect of the existing regime could be increased. However, the overall effectiveness of the international regime appears to be limited by several factors that can not be corrected by means of a modification of the CLC and IOPC conventions. (author)

  15. "APEC blue"--The effects and implications of joint pollution prevention and control program.

    Science.gov (United States)

    Wang, Hongbo; Zhao, Laijun; Xie, Yujing; Hu, Qingmi

    2016-05-15

    To ensure good air quality in Beijing during Asia-Pacific Economic Cooperation (APEC) China 2014, Beijing and its neighboring five provinces and the associated cities were combined under the Joint Prevention and Control of Atmospheric Pollution (JPCAP) program, which implemented rigorous cooperative emission reduction measures. The program was a unique and large-scale artificial experiment that showed that such measures can achieve excellent results, and it led to the popular "APEC blue" catchphrase (i.e., Beijing's skies became blue as pollution levels decreased). This artificial experiment provided the means to effectively conduct JPCAP strategies in the future. Accordingly, our research focused on the characteristics of the six primary pollutants in Beijing. We found that the JPCAP measures directly reduced concentrations of all pollutants except O3. Through correlation analysis, we found that the band distribution of the cities with strong correlations in PM2.5 and PM10 concentrations was affected by wind conditions. Therefore, JPCAP measures should account for specific seasonal and climatic conditions. Based on cluster analysis using the results from the correlation analysis, we divided 13 cities within a 300-km radius of Beijing into different groups according to the similarity of their PM2.5 and PM10 correlation coefficients. For JPCAP measures relevant to PM2.5 and PM10, we found differences in the degrees of collaboration among cities. Therefore, depending upon the pollutant type, the JPCAP strategy should account for the cities involved, the scope of the core area, and the optimal cities to involve in the collaborative efforts based on cost-effectiveness and collaborative difficulty among the involved cities. Copyright © 2016 Elsevier B.V. All rights reserved.

  16. ADDRESSING POLLUTION PREVENTION ISSUES IN THE DESIGN OF A NEW NUCLEAR RESEARCH FACILITY

    International Nuclear Information System (INIS)

    Cournoyer, Michael E.; Corpion, Juan; Nelson, Timothy O.

    2003-01-01

    The Chemistry and Metallurgical Research (CMR) Facility was designed in 1949 and built in 1952 at Los Alamos National Laboratory (LANL) to support analytical chemistry, metallurgical studies, and actinide research and development on samples of plutonium and other nuclear materials for the Atomic Energy Commission's nuclear weapons program. These primary programmatic uses of the CMR Facility have not changed significantly since it was constructed. In 1998, a seismic fault was found to the west of the CMR Facility and projected to extend beneath two wings of the building. As part of the overall Risk Management Strategy for the CMR Facility, the Department of Energy (DOE) proposed to replace it by 2010 with what is called the CMR Facility Replacement (CMRR). In an effort to make this proposed new nuclear research facility environmentally sustainable, several pollution prevention/waste minimization initiatives are being reviewed for potential incorporation during the design phase. A two-phase approach is being adopted; the facility is being designed in a manner that integrates pollution prevention efforts, and programmatic activities are being tailored to minimize waste. Processes and procedures that reduce waste generation compared to current, prevalent processes and procedures are identified. Some of these ''best practices'' include the following: (1) recycling opportunities for spent materials; (2) replacing lithium batteries with alternate current adaptors; (3) using launderable contamination barriers in Radiological Control Areas (RCAs); (4) substituting mercury thermometers and manometers in RCAs with mercury-free devices; (5) puncturing and recycling aerosol cans; (6) using non-hazardous low-mercury fluorescent bulbs where available; (7) characterizing low-level waste as it is being generated; and (8) utilizing lead alternatives for radiological shielding. Each of these pollution prevention initiatives are being assessed for their technical validity, relevancy

  17. Integrating Hazardous Materials Characterization and Assessment Tools to Guide Pollution Prevention in Electronic Products and Manufacturing

    Science.gov (United States)

    Lam, Carl

    Due to technology proliferation, the environmental burden attributed to the production, use, and disposal of hazardous materials in electronics have become a worldwide concern. The major theme of this dissertation is to develop and apply hazardous materials assessment tools to systematically guide pollution prevention opportunities in the context of electronic product design, manufacturing and end-of-life waste management. To this extent, a comprehensive review is first provided on describing hazard traits and current assessment methods to evaluate hazardous materials. As a case study at the manufacturing level, life cycle impact assessment (LCIA)-based and risk-based screening methods are used to quantify chemical and geographic environmental impacts in the U.S. printed wiring board (PWB) industry. Results from this industrial assessment clarify priority waste streams and States to most effectively mitigate impact. With further knowledge of PWB manufacturing processes, select alternative chemical processes (e.g., spent copper etchant recovery) and material options (e.g., lead-free etch resist) are discussed. In addition, an investigation on technology transition effects for computers and televisions in the U.S. market is performed by linking dynamic materials flow and environmental assessment models. The analysis forecasts quantities of waste units generated and maps shifts in environmental impact potentials associated with metal composition changes due to product substitutions. This insight is important to understand the timing and waste quantities expected and the emerging toxic elements needed to be addressed as a consequence of technology transition. At the product level, electronic utility meter devices are evaluated to eliminate hazardous materials within product components. Development and application of a component Toxic Potential Indicator (TPI) assessment methodology highlights priority components requiring material alternatives. Alternative

  18. Convention on the Prevention of Marine Pollution by Dumping of Wastes and Other Matter

    International Nuclear Information System (INIS)

    1974-01-01

    The Convention on the Prevention of Marine Pollution by Dumping of Wastes and Other Matter was drawn up at the Inter-Governmental Conference on the Dumping of Wastes at Sea, held in London from 30 October to 10 November 1972. The Governments of Mexico, the Union of Soviet Socialist Republics, the United Kingdom of Great Britain and Northern Ireland and the United States of America are the Depository Governments for instruments of ratification of, and accession to, the Convention, pursuant to Articles XVII and XVIII respectively

  19. Pollution prevention in the analytical laboratory--Microscale and other techniques do add up

    International Nuclear Information System (INIS)

    Erickson, M.D.; Alvarado, J.S.; Lu, C.-S.; Peterson, D.P.; Silzer, J.

    1996-01-01

    The principles of pollution prevention in the analytical laboratory have not been addressed sufficiently. Although the amount of reagent used per sample is often only a few milliliters, the aggregate of many routine test each day in thousands of laboratories becomes significant. Current recycling practices are not practical with small streams. Therefore, we have adopted the principles of microscale chemistry, along with other modern analytical approaches, to develop routine analytical methods that significantly curtail waste but still maintain acceptable analytical figures of merit and achieve cost savings through reduced reagent consumption and reduced labor cost

  20. Convention on the Prevention of Marine Pollution by Dumping of Wastes and Other Matter

    International Nuclear Information System (INIS)

    1974-01-01

    The Convention on the Prevention of Marine Pollution by Dumping of Wastes and Other Matter was drawn up at the Inter-Governmental Conference on the Dumping of Wastes at Sea, held in London from 30 October to 10 November 1972. The Governments of Mexico, the Union of Soviet Socialist Republics, the United Kingdom of Great Britain and Northern Ireland and the United States of America are the Depository Governments for instruments of ratification of, and accession to, the Convention, pursuant to Articles XVII and XVIII respectively [es

  1. Environmental implementation plan: Chapter 5, Chemical management, pollution prevention and other compliance programs

    International Nuclear Information System (INIS)

    Peterson, G.L.

    1993-01-01

    Compliance with environmental regulations and US Department of Energy Orders (DOE) relating to environmental protection is an important part of SRS's program. Over the past few years, the number of environmental regulations has increased. The strategy to comply with new and existing environmental regulations and DOE orders is described in chapter two. In this chapter, the following environmental programs are described: Toxic Substances Control Act (TSCA); Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA); Emergency Planning and Community Right-to-Know Act (EPCRA); and SPCC/BMP/Pollution Prevention Plans;The implementation section identifies issues and those responsible to achieve defined objectives

  2. Control and prevention of industrial air pollution: Special issue; Bestrijding en preventie van industriele luchtverontreiniging: Thema

    Energy Technology Data Exchange (ETDEWEB)

    Waque, W.P.G.M. [Bureau Vergunningen en Bedrijven, DCMR Milieudienst Rijnmond, Schiedam (Netherlands); Zijlstra, W.M. [Bureau Milieu en Ruimtelijke Ordening, VNO/NCW, The Hague (Netherlands); Buisman, C.J.N.; Dijkman, H. [Paques, Balk (Netherlands); Prins, W.L.; Verbraak, P. [Biostar Development, Balk (Netherlands); Den Hartog, A.J. [Hoogovens Corporate Research Laboratorium, IJmuiden (Netherlands); Jol, A. [Sector Milieutechnologie, DHV Milieu en Infrastructuur, Amersfoort (Netherlands); Van Ham, J. [ed.

    1994-12-01

    In four articles in this special issue of the magazine attention is paid to new techniques by which emissions to the air from the industry can be controlled and/or prevented. In the first article an overview is given of sources of air pollution, caused by dust. In the second article intermediate results of the KWS 2000 program (aimed at 50% reduction of the emission of volatile organic matter for the year 2000) are outlined. In the third article a cooperative biological (flue) gas desulfurization pilot plant project is discussed. In the fourth and last article the most important possible techniques to reduce the emission of volatile organic matter are highlighted

  3. GM`s PICOS initiative on resource conservation and pollution prevention: Greening the supply chain

    Energy Technology Data Exchange (ETDEWEB)

    Pritchett, T. [General Motors Corp., Detroit, MI (United States)

    1997-12-31

    This paper is comprised of reprints of several related articles from business publications. The first article, on supply-side economics, describes efforts by General Motors to cut costs by encouraging suppliers to reduce the environmental impacts of their products. The PICOS{trademark} program of General Motors helps industrial identify and implement energy efficiency and pollution prevention projects that lower operating costs while reducing emissions linked to global climate change. The second article also describes the program, focusing on aspects of global competition.

  4. Spatial resolution requirements for traffic-related air pollutant exposure evaluations

    Science.gov (United States)

    Batterman, Stuart; Chambliss, Sarah; Isakov, Vlad

    2014-09-01

    Vehicle emissions represent one of the most important air pollution sources in most urban areas, and elevated concentrations of pollutants found near major roads have been associated with many adverse health impacts. To understand these impacts, exposure estimates should reflect the spatial and temporal patterns observed for traffic-related air pollutants. This paper evaluates the spatial resolution and zonal systems required to estimate accurately intraurban and near-road exposures of traffic-related air pollutants. The analyses use the detailed information assembled for a large (800 km2) area centered on Detroit, Michigan, USA. Concentrations of nitrogen oxides (NOx) due to vehicle emissions were estimated using hourly traffic volumes and speeds on 9700 links representing all but minor roads in the city, the MOVES2010 emission model, the RLINE dispersion model, local meteorological data, a temporal resolution of 1 h, and spatial resolution as low as 10 m. Model estimates were joined with the corresponding shape files to estimate residential exposures for 700,000 individuals at property parcel, census block, census tract, and ZIP code levels. We evaluate joining methods, the spatial resolution needed to meet specific error criteria, and the extent of exposure misclassification. To portray traffic-related air pollutant exposure, raster or inverse distance-weighted interpolations are superior to nearest neighbor approaches, and interpolations between receptors and points of interest should not exceed about 40 m near major roads, and 100 m at larger distances. For census tracts and ZIP codes, average exposures are overestimated since few individuals live very near major roads, the range of concentrations is compressed, most exposures are misclassified, and high concentrations near roads are entirely omitted. While smaller zones improve performance considerably, even block-level data can misclassify many individuals. To estimate exposures and impacts of traffic

  5. 77 FR 21911 - Approval and Promulgation of Implementation Plans; State of Arizona; Prevention of Air Pollution...

    Science.gov (United States)

    2012-04-12

    ...EPA is proposing to approve the State Implementation Plan (SIP) revision submitted by the State of Arizona to address the requirements regarding air pollution emergency episodes in Clean Air Act (CAA or Act) section 110(a)(2)(G). Section 110(a)(2)(G) of the Act requires that each SIP provide for authority comparable to that in section 303 of the Act and adequate contingency plans to implement such authority. EPA is proposing to approve Arizona's SIP revision as meeting the authority and contingency plans for the 1997 8-hour ozone National Ambient Air Quality Standards (NAAQS or standards).

  6. Climate change and occupational allergies: an overview on biological pollution, exposure and prevention.

    Science.gov (United States)

    D'Ovidio, Maria Concetta; Annesi-Maesano, Isabella; D'Amato, Gennaro; Cecchi, Lorenzo

    2016-01-01

    Climate change, air pollution, temperature increase and other environmental variables are modifying air quality, contributing to the increase of prevalence of allergic respiratory diseases. Allergies are complex diseases characterized by multilevel interactions between individual susceptibility, response to immune modulation and environmental exposures to physical, chemical and biological agents. Occupational allergies introduce a further complexity to these relationships by adding occupational exposure to both the indoor and outdoor ones in the living environment. The aim of this paper is to overview climate-related allergy affecting environmental and occupational health, as literature data are scanty in this regard, and to suggest a management model of this risk based on a multidisciplinary approach, taking the case of biological pollution, with details on exposure and prevention. The management of climate-related occupational allergy should take into account preventive health strategies, environmental, public and occupational interventions, as well as to develop, implement, evaluate, and improve guidelines and standards protecting workers health under changing climatic conditions; new tools and strategies based on local conditions will have to be developed. Experimental studies and acquisition of environmental and personal data have to be matched to derive useful information for the scope of occupational health and safety.

  7. Pollution prevention opportunity assessment for the K-25 Site Steam Plant -- Level 3

    International Nuclear Information System (INIS)

    1995-09-01

    A Level 3 pollution prevention opportunity assessment (PPOA) was performed for the K-1501 Steam Plant at the K-25 Site. The primary objective was to identify and evaluate pollution prevention (P2) options to reduce the quantities of each waste stream generated by the Steam Plant. For each of the waste streams, P2 options were evaluated to first reduce the quantity of waste generated and second to recycle the waste. This report provides a process description of the facility; identification, evaluation, and recommendations of P2 options; an implementation schedule with funding sources; and conclusions. Largely for economic reasons, only 3 of the 14 P2 options are being recommended for implementation. All are source reduction options. When implemented, these three options are estimated to reduce the annual generation of waste by 658,412 kg and will result in a cost savings of approximately $29,232/year for the K-25 Site. The recommended options are to: install a flue gas return System in Boiler 7; reduce steam loss from traps; and increase lapse time between rinses. The four boilers currently in operation at the Steam Plant use natural gas or fuel oil as fuel sources

  8. Waste minimization and pollution prevention technology transfer : the Airlie House Projects

    International Nuclear Information System (INIS)

    Gatrone, R.; McHenry, J.; Myron, H.; Thout, J. R.

    1998-01-01

    The Airlie House Pollution Prevention Technology Transfer Projects were a series of pilot projects developed for the US Department of Energy with the intention of transferring pollution prevention technology to the private sector. The concept was to develop small technology transfer initiatives in partnership with the private sector. Argonne National Laboratory developed three projects: the microscale chemistry in education project, the microscale cost benefit study project, and the Bethel New Life recycling trainee project. The two microscale chemistry projects focused on introducing microscale chemistry technologies to secondary and college education. These programs were inexpensive to develop and received excellent evaluations from participants and regulators. The Bethel New Life recycling trainee project provided training for two participants who helped identify recycling and source reduction opportunities in Argonne National Laboratory's solid waste stream. The pilot projects demonstrated that technology transfer initiatives can be developed and implemented with a small budget and within a short period of time. The essential components of the pilot projects were identifying target technologies that were already available, identifying target audiences, and focusing on achieving a limited but defined objective

  9. Prevention, Minimization and Control of Environmental Pollution at Mexico Sugar Mill

    Directory of Open Access Journals (Sweden)

    Dominguez-Manjarrez Candi Ashanti

    2014-10-01

    Full Text Available This research paper aims to recommend control measures directed towards preventing and minimizing pollution, looking forward to the improvement of the environmental management on the sugar industry in Mexico. This issue has been put on hold due to the necessity to address the economic, social and technological issues affecting it over time. In order to better understand the productive process and the actual problem that the industry is facing, while proposing effective and possible actions for improvement, a sugar mill type was selected as a case of study. A comprehensive assessment of the production process for the standard sugar was made, considering the activities in the field and at the mill. The proposed measures in the sugar mill allowed savings in consumption of ground water average 3,620 cubic meters per day, during the period of study, reduction in solid waste generated average 325 kilograms per day by implementing a waste separation program, and reducing atmospheric emissions of particles acting as fuel for a boiler operated with bagasse. The prevention, minimization and pollution control measures proposed can be applied to other mills in the country with the appropriate adaptations.

  10. Annual report of waste generation and pollution prevention progress 1998; ANNUAL

    International Nuclear Information System (INIS)

    NONE

    1999-01-01

    This seventh Annual Report presents and analyzes DOE Complex-wide waste generation and pollution prevention activities at 45 reporting sites from 1993 through 1998. This section summarizes Calendar Year 1998 Complex-wide waste generation and pollution prevention accomplishments. More detailed information follows this section in the body of the Report. In May 1996, the Secretary of Energy established a 50 percent Complex-Wide Waste Reduction Goal (relative to the 1993 baseline) for routine operations radioactive, mixed, and hazardous waste generation, to be achieved by December31, 1999. DOE has achieved its Complex-Wide Waste Reduction Goals for routine operations based upon a comparison of 1998 waste generation to the 1993 baseline. Excluding sanitary waste, routine operations waste generation decreased 67 percent overall from 1993 to 1998. However, for the first time since 1994, the total amount of materials recycled by the Complex decreased from 109,600 metric tons in 1997 to 92,800 metric tons in 1998. This decrease is attributed to the fact that in 1997, several large ''one-time only'' recycling projects were conducted throughout the Complex. In order to demonstrate commitment to DOE's Complex-wide recycling goal, it is important for sites to identify all potential large-scale recycling/reuse opportunities

  11. Multi-media pollution prevention: A case study of a refinery

    International Nuclear Information System (INIS)

    Schmitt, R.E.; Podar, M.K.

    1994-01-01

    In late 1989, Amoco Corporation and the United States Environmental Protection Agency began a voluntary, joint project to study pollution prevention opportunities at an industrial facility. Amoco proposed use of its refinery at Yorktown, Virginia, to conduct a multi-media assessment of releases to the environment, then to develop and evaluate options to reduce these releases. A Workgroup composed of state, federal, and Amoco representatives provided oversight to the Project. Monthly Workgroup meetings provided Project oversight, a forum for presentations on different Project components, and an opportunity for informal discussion of different viewpoints about environmental management. The Workgroup identified four objectives for this study: (1) Inventory refinery releases to the environment to define their chemical type, quantity, source, and medium of release; (2) develop options to reduce selected releases identified, as well as rank and prioritize the options based on a variety of criteria and perspectives; (3) identify and evaluate factors as technical, legislative, regulatory, institutional, permitting, and economic, that impede or encourage pollution prevention; and (4) enhance participates' knowledge of refinery and regulatory systems

  12. Stormwater Pollution Prevention Plan for the TA-60-02 Salvage Warehouse, Los Alamos National Laboratory, Revision 3, January 2018

    Energy Technology Data Exchange (ETDEWEB)

    Burgin, Jillian Elizabeth [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2018-02-08

    This Storm Water Pollution Prevention Plan (SWPPP) was developed in accordance with the provisions of the Clean Water Act (33 U.S.C. §§1251 et seq., as amended), and the Multi-Sector General Permit for Storm Water Discharges Associated with Industrial Activity (U.S. EPA, June 2015) issued by the U.S. Environmental Protection Agency (EPA) for the National Pollutant Discharge Elimination System (NPDES) and using the industry specific permit requirements for Sector P-Land Transportation and Warehousing as a guide. The applicable stormwater discharge permit is EPA General Permit Registration Number NMR053915 (Los Alamos National Security (LANS) (U.S. EPA, June 2015). Contents of the June 4, 2015 Multi-sector General Permit can be viewed at: https://www.epa.gov/sites/production/files/2015- 10/documents/msgp2015_finalpermit.pdf This SWPPP applies to discharges of stormwater from the operational areas of the TA-60-02 Salvage and Warehouse facility at Los Alamos National Laboratory. Los Alamos National Laboratory (also referred to as LANL or the “Laboratory”) is owned by the Department of Energy (DOE), and is operated by Los Alamos National Security, LLC (LANS). Throughout this document, the term “facility” refers to the TA-60-02 Salvage/ Warehouse and associated areas. The current permit expires at midnight on June 4, 2020. A copy of the facility NOI and LANS Delegation of Authority Letter are located in Appendix C of this SWPPP.

  13. Haptoglobin is required to prevent oxidative stress and muscle atrophy.

    Directory of Open Access Journals (Sweden)

    Enrico Bertaggia

    Full Text Available BACKGROUND: Oxidative stress (OS plays a major role on tissue function. Several catabolic or stress conditions exacerbate OS, inducing organ deterioration. Haptoglobin (Hp is a circulating acute phase protein, produced by liver and adipose tissue, and has an important anti-oxidant function. Hp is induced in pro-oxidative conditions such as systemic inflammation or obesity. The role of systemic factors that modulate oxidative stress inside muscle cells is still poorly investigated. RESULTS: We used Hp knockout mice (Hp-/- to determine the role of this protein and therefore, of systemic OS in maintenance of muscle mass and function. Absence of Hp caused muscle atrophy and weakness due to activation of an atrophy program. When animals were stressed by acute exercise or by high fat diet (HFD, OS, muscle atrophy and force drop were exacerbated in Hp-/-. Depending from the stress condition, autophagy-lysosome and ubiquitin-proteasome systems were differently induced. CONCLUSIONS: Hp is required to prevent OS and the activation of pathways leading to muscle atrophy and weakness in normal condition and upon metabolic challenges.

  14. Preventive Effect of Residential Green Space on Infantile Atopic Dermatitis Associated with Prenatal Air Pollution Exposure.

    Science.gov (United States)

    Lee, Ji-Young; Lamichhane, Dirga Kumar; Lee, Myeongjee; Ye, Shinhee; Kwon, Jung-Hyun; Park, Myung-Sook; Kim, Hwan-Cheol; Leem, Jong-Han; Hong, Yun-Chul; Kim, Yangho; Ha, Mina; Ha, Eunhee

    2018-01-09

    Few birth cohort studies have examined the role of traffic-related air pollution (TRAP) in the development of infantile atopic dermatitis (AD), but none have investigated the role of preventive factors such as green spaces. The aim of this study was to investigate whether exposure to nitrogen dioxide (NO₂) and particulate matter with an aerodynamic diameter of Health study. Subjects were geocoded to their residential addresses and matched with air pollution data modeled using land-use regression. Information on infantile AD was obtained by using a questionnaire administered to the parents or guardians of the children. The association between infantile AD and exposure to NO₂ and PM 10 was determined using logistic regression models. We assessed the effects of residential green spaces using stratified analyses and by entering product terms into the logistic regression models. The risk of infantile AD significantly increased with an increase in air pollution exposure during the first trimester of pregnancy. The adjusted odds ratio (OR) and 95% confidence interval (CI) were 1.219 (1.023-1.452) per 10 μg/m³ increase in PM 10 and 1.353 (1.027-1.782) per 10 ppb increase in NO₂. An increase in the green space within 200 m of residence was associated with a decreased risk of AD (OR = 0.996, 95% CI: 0.993-0.999). The stratified analysis of residential green space revealed stronger associations between infantile AD and PM 10 and NO₂ exposure during the first trimester in the areas in the lower tertiles of green space. This study indicated that exposure to TRAP during the first trimester of pregnancy is associated with infantile AD. Less residential green space may intensify the association between TRAP exposure and infantile AD.

  15. A new theory and method of preventing harmful waste landfill from pollution to groundwater

    International Nuclear Information System (INIS)

    Liu Changli; Zhang Yun; Song Shuhong; Hou Hongbing

    2006-01-01

    It is limited in conventional Soil Liner theory of waste landfill, we must update the theory and the calculational methods must be broke, so that the cost of waste landfill could be reduced in wide scope, this is important to develop economy and environment in sustaining rate. It is an innovation in the theory of the pollution control in the waste landfill groundwater through translated the theories of 'excluding infiltrate to groundwater' into 'insulating waste, allowing water into groundwater', the theory of waste landfill from pollution to groundwater came true. Clayey Soil not only can prevent seepage, but also can obstruct waste. If we can make use of its filtration adequately, just as using experimentation in laboratory to research filtration capability, calculation, we could made new testing technique and calculated technique of liner parameters. This paper take an example of which calculate to liner parameters, such as 'filtration capability' and 'adequacy thickness of effective liner', and make a programming of landfill site by this theory and method in Beijing plain. (authors)

  16. Preventive measures of water pollution in China; Chugoku ni okeru suishitsu odaku boshi taisaku

    Energy Technology Data Exchange (ETDEWEB)

    Qian, Y.; Huang, X.

    1996-01-10

    This paper describes the progress and the major results of research and development on technologies and measures to prevent water pollution in China. Tests and researches have been performed on an upward anaerobic sludge blanket (UASB), a vertical baffled anaerobic sludge blanket, two-phase anaerobic digestion, and an anaerobic fluidized bed. When anaerobically digested sludge and aerobic active sludge are inoculated in the UASB, particle-shaped sludge was formed well in both sludges. This technology has begun to be used in breweries and citric acid factories. With anaerobic treatment of waste water containing sulfate, the sulfate was recovered as sulfur by using the first and second phases. Research and development is being progressed on the oxidation ditch technology as an improved version of the active sludge method. In a pilot test of a soil treatment system and a stabilization pond treatment system as alternative technology for the active sludge method, the BOD in the treated water was found 2.5 mg{times}1/l. Attentions are drawn on primary treatment, a living organism contact oxidation method, and a continuous filtration treatment process as technologies to turn polluted water into resources. 6 refs., 1 tab.

  17. Recommendations to ECE governments on the prevention of water pollution from hazardous substances as adopted by the Committee on Environmental Policy at its first session (1994)

    International Nuclear Information System (INIS)

    1995-01-01

    With a view to preventing, controlling and reducing the release of pollutants into the aquatic environment, thus promoting the implementation of the Convention on the Protection and Use of Transboundary Watercourses and International Lakes, pending its entry into force, it is recommended that ECE Governments, taking into account, inter alia, current water quality, water-quality requirements of present and future water users in the relevant catchments, requirements of aquatic and riparian flora and fauna, assessments of the risks involved, the urgency of control measures, and the economic feasibility

  18. HIA and pollution prevention control: What they can learn from each other

    International Nuclear Information System (INIS)

    Ahmad, Balsam; Pless-Mulloli, Tanja; Vizard, Catherine

    2005-01-01

    Following the implementation of the Pollution Prevention and Control (England and Wales) Regulations on 1st August 2000, health authorities (now Primary Care Trusts) became statutory consultees for permits issued to industry by the environmental regulators (the Environmental Agency, Local Authorities). The aims of this paper are to review the process of providing public health input in the light of its similarities to and differences from HIA and to identify the opportunities for both HIA and PPC to learn from each other's practice. We emphasise the challenges that are encountered by public health professionals who provide the public health input in the PPC. We use both our own experience of providing this input on behalf of health authorities and our expertise in HIA, environmental epidemiology and contaminated land

  19. Amoco-US Environmental Protection Agency, pollution prevention project, Yorktown, Virginia: Yorktown refinery project workplan

    International Nuclear Information System (INIS)

    Curran, L.; Grieves, C.; Browning, R.; Hanlon, D.; Crane, C.

    1990-09-01

    The report provides a detailed workplan for obtaining data and analyzing results for a 2-year pollution prevention study of Amoco Oil Company's Yorktown Virginia Refinery. The study was jointly sponsored as a cooperative effort of Amoco Corporation and the United States Environmental Protection Agency. The goals of the study include (1) a multi-media inventory of all releases entering the environment from the Refinery, (2) development of possible engineering options to reduce the releases, (3) analysis of each option in terms of release reduction potential, impact on human health risk, ecological impact, changes in future liability, etc. and (4) identification of obstacles and incentives for implementation of any of the options considered

  20. Pollution prevention opportunity assessment for MicroFab and SiFab facilities at Sandia National Laboratories.

    Energy Technology Data Exchange (ETDEWEB)

    Gerard, Morgan Evan

    2011-12-01

    This Pollution Prevention Opportunity Assessment (PPOA) was conducted for the MicroFab and SiFab facilities at Sandia National Laboratories/New Mexico in Fiscal Year 2011. The primary purpose of this PPOA is to provide recommendations to assist organizations in reducing the generation of waste and improving the efficiency of their processes and procedures. This report contains a summary of the information collected, the analyses performed, and recommended options for implementation. The Sandia National Laboratories Environmental Management System (EMS) and Pollution Prevention (P2) staff will continue to work with the organizations to implement the recommendations.

  1. [Prevention and control of air pollution needs to strengthen further study on health damage caused by air pollution].

    Science.gov (United States)

    Wu, T C

    2016-08-06

    Heath issues caused by air pollution such as particulate matter (PM) are much concerned and focused among air, water and soil pollutions because human breathe air for whole life span. Present comments will review physical and chemical characteristics of PM2.5 and PM10; Dose-response associations of PM10, PM2.5 and their components with mortality and risk of cardiopulmonary diseases, early health damages such as the decrease of lung functions and heart rate variability, DNA damage; And the roles of genetic variations and epigenetic changes in lung functions and heart rate variability, DNA damage related to PMs and their components. This comments list some limitations and perspectives about the associations of air pollution with health.

  2. Radioactive marine pollution

    International Nuclear Information System (INIS)

    Pontavice, E. du

    1976-01-01

    Certain provision in international law aim to prevent radioactive marine pollution and others concern compensation of damage from nuclear pollution. Prevention requires regulation of the disposal of wastes from nuclear industry from the operation of nuclear powered ships and from transport of fissile materials. As regards damage, if the measures to limit the extent of the damage come under the law of the sea, the priority of nuclear law over maritime law is clear in respect of financial compensation. (Auth) [fr

  3. The Impact of Pollution Prevention on Toxic Environmental Releases from U.S. Manufacturing Facilities.

    Science.gov (United States)

    Ranson, Matthew; Cox, Brendan; Keenan, Cheryl; Teitelbaum, Daniel

    2015-11-03

    Between 1991 and 2012, the facilities that reported to the U.S. Environmental Protection Agency's Toxic Release Inventory (TRI) Program conducted 370,000 source reduction projects. We use this data set to conduct the first quasi-experimental retrospective evaluation of how implementing a source reduction (pollution prevention) project affects the quantity of toxic chemicals released to the environment by an average industrial facility. We use a differences-in-differences methodology, which measures how implementing a source reduction project affects a facility's releases of targeted chemicals, relative to releases of (a) other untargeted chemicals from the same facility, or (b) the same chemical from other facilities in the same industry. We find that the average source reduction project causes a 9-16% decrease in releases of targeted chemicals in the year of implementation. Source reduction techniques vary in effectiveness: for example, raw material modification causes a large decrease in releases, while inventory control has no detectable effect. Our analysis suggests that in aggregate, the source reduction projects carried out in the U.S. since 1991 have prevented between 5 and 14 billion pounds of toxic releases.

  4. The U.S. DOE new production reactor/heavy water reactor facility pollution prevention/waste minimization program

    International Nuclear Information System (INIS)

    Kaczmarsky, Myron M.; Tsang, Irving; Stepien, Walter P.

    1992-01-01

    A Pollution Prevention/Waste Minimization Program was established during the early design phase of the U.S. DOE's New Production Reactor/Heavy Water Reactor Facility (NPR/HWRF) to encompass design, construction, operation and decommissioning. The primary emphasis of the program was given to waste elimination, source reduction and/or recycling to minimize the quantity and toxicity of material before it enters the waste stream for treatment or disposal. The paper discusses the regulatory and programmatic background as it applies to the NPR/HWRF and the waste assessment program developed as a phased approach to pollution prevention/waste minimization for the NPR/HWRF. Implementation of the program will be based on various factors including life cycle cost analysis, which will include costs associated with personnel, record keeping, transportation, pollution control equipment, treatment, storage, disposal, liability, compliance and oversight. (author)

  5. EVALUATION OF POLLUTION PREVENTION OPTIONS TO REDUCE STYRENE EMISSIONS FROM FIBER-REINFORCED PLASTIC OPEN MOLDING PROCESSES

    Science.gov (United States)

    Pollution prevention (P2) options to reduce styrene emissions, such as new materials, and application equipment, are commercially available to the operators of open molding processes. However, information is lacking on the emissions reduction that these options can achieve. To me...

  6. Environmental Compliance and Pollution Prevention Training Manual for Campus-Based Organizations--Operational and Facility Maintenance Personnel.

    Science.gov (United States)

    New York State Dept. of Environmental Conservation, Albany.

    This manual was designed to be used as part of the Workshop on Environmental Compliance and Pollution Prevention for campus-based facilities. It contains basic information on New York state and federal laws, rules, and regulations for protecting the environment. The information presented is a summary with emphasis on those items believed to be…

  7. A systematic review on status of lead pollution and toxicity in Iran; Guidance for preventive measures

    Directory of Open Access Journals (Sweden)

    Abdollahi Mohammad

    2012-07-01

    Full Text Available Abstract Lead is an old environmental metal which is presented everywhere and lead poisoning is an important health issue in many countries in the world including Iran. It is known as a silent environmental disease which can have life-long adverse health effects. In children, the most vulnerable population, mental development of children health effects is of the greatest influence. Low level lead exposure can significantly induce motor dysfunctions and cognitive impairment in children. The sources of lead exposure vary among countries. Occupational lead exposure is an important health issue in Iran and mine workers, employees of paint factories, workers of copying centers, drivers, and tile making factories are in higher risk of lead toxicity. Moreover lead processing industry has always been a major of concern which affects surface water, drinking waters, and ground waters, even water of Caspian Sea, Persian Gulf and rivers due to increasing the number of industries in vicinity of rivers that release their waste discharges into river or sea. In addition, lead contamination of soil and air especially in vicinity of polluted and industrialized cities is another health problem in Iran. Even foods such as rice and fishes, raw milk, and vegetables which are the most common food of Iranian population are polluted to lead in some area of Iran. Adding lead to the opium is a recently health hazard in Iran that has been observed among opium addicts. There are few studies evaluated current status of lead exposure and toxicity in the Iranian children and pregnant women which should be taken into account of authorities. We recommend to identify sources, eliminate or control sources, and monitor environmental exposures and hazards to prevent lead poisoning.

  8. A Systematic Review on Status of Lead Pollution and Toxicity in Iran; Guidance for Preventive Measures

    Directory of Open Access Journals (Sweden)

    Parissa Karrari

    2012-07-01

    Full Text Available Lead is an old environmental metal which is presented everywhere and lead poisoning is an important health issue in many countries in the world including Iran. It is known as a silent environmental disease which can have life-long adverse health effects. In children, the most vulnerable population, mental development of children health effects is of the greatest influence. Low level lead exposure can significantly induce motor dysfunctions and cognitive impairment in children. The sources of lead exposure vary among countries. Occupational lead exposure is an important health issue in Iran and mine workers, employees of paint factories, workers of copying centers, drivers,and tile making factories are in higher risk of lead toxicity. Moreover lead processing industry has always been amajor of concern which affects surface water, drinking waters, and ground waters, even water of Caspian Sea,Persian Gulf and rivers due to increasing the number of industries in vicinity of rivers that release their waste discharges into river or sea. In addition, lead contamination of soil and air especially in vicinity of polluted andindustrialized cities is another health problem in Iran. Even foods such as rice and fishes, raw milk, and vegetables which are the most common food of Iranian population are polluted to lead in some area of Iran. Adding lead to the opium is a recently health hazard in Iran that has been observed among opium addicts. There are few studiesevaluated current status of lead exposure and toxicity in the Iranian children and pregnant women which should be taken into account of authorities. We recommend to identify sources, eliminate or control sources, and monitor environmental exposures and hazards to prevent lead poisoning.

  9. An environmental assessment strategy for the identification of pollution prevention opportunities in the southern Urals Region of Russia

    International Nuclear Information System (INIS)

    Gonzalez, M.A.; Ott, R.L.

    1993-01-01

    The serious environmental problems of the South Urals Region of Russia have been broadly described in a report coauthored by Russian weapons scientists. The importance of taking the first steps to prevent further environmental damage and adverse public health effects has been recognized by the international scientific community. Scientists at the Lawrence Livermore National Laboratory have initiated a project to assist the Russians in their pollution prevention efforts. The specific objectives of this project are to: (1) conduct a pragmatic survey of the industrial and governmental pollution sources in a limited geographic region of the South Urals and (2) identify the priorities for pollution prevention and for food and water supply improvements at distribution points. The emphasis is on preventing adverse impacts to human health and improving industrial productivity. This project focuses on immediate pollution problems resulting from current operations and their solutions, not on long-term research related to the large-scale cleanup of legacy wastes. The project emphasizes near-term cost effective solutions to prevent pollution while longer term research aimed at contamination from past practices is pursued by other scientists. The project is being conducted in collaboration with environmental and physical scientists from institutes associated with the Ural Branch of the Russian Academy of Sciences; government officials at the national, regional, and local levels; and non-governmental Russian environmental groups. A broad cross section of Russian technical, political, and environmental abilities and interests is mandatory. This cross section will ensure the technical quality, the political acceptability, and the popular credibility of the project results to the affected Russians in the South Urals. Progress on this project is presented in this paper

  10. Transforming environmental permitting and compliance policies to promote pollution prevention: Removing barriers and providing incentives to foster technology innovation, economic productivity, and environmental protection. Final report

    International Nuclear Information System (INIS)

    Berg, D.R.; Kerr, R.L.; Fleischer, S.; Gorsen, M.; Harris, E.

    1993-04-01

    The Technology Innovation and Economics (TIE) Committee, a standing committee of EPA's National Advisory Council for Environmental Policy and Technology (NACEPT), has concluded that major changes are needed in federal and state permitting and compliance programs to encourage adoption of practical pollution prevention approaches to environmental protection. The Committee recommends seven major areas for improvement, including: (1) Redesigning permit procedures to encourage regulated facilities to expand multi-media and pollution prevention environmental improvement efforts; (2) Accelerating development and use of innovative pollution prevention technologies and techniques through special permitting and review procedures during RD ampersand D and commercialization phases; (3) Developing and expanding federal and state pollution prevention enforcement initiative; (4) Supporting state initiatives in pollution prevention facility planning; (5) Expanding pollution prevention-related training, educational and technology diffusion efforts to better reach managers in all sectors of the economy; (6) Altering personnel reward systems to encourage EPA staff to champion pollution prevention; (7) Expanding and publicizing the system of national awards honoring outstanding pollution prevention research, training and technology implementation

  11. Standardizing economic analysis in prevention will require substantial effort.

    Science.gov (United States)

    Guyll, Max

    2014-12-01

    It is exceedingly difficult to compare results of economic analyses across studies due to variations in assumptions, methodology, and outcome measures, a fact which surely decreases the impact and usefulness of prevention-related economic research. Therefore, Crowley et al. (Prevention Science, 2013) are precisely correct in their call for increased standardization and have usefully highlighted the issues that must be addressed. However, having made the need clear, the questions become what form the solution should take, and how should it be implemented. The present discussion outlines the rudiments of a comprehensive framework for promoting standardized methodology in the estimation of economic outcomes, as encouraged by Crowley et al. In short, a single, standard, reference case approach should be clearly articulated, and all economic research should be encouraged to apply that standard approach, with results from compliant analyses being reported in a central archive. Properly done, the process would increase the ability of those without specialized training to contribute to the body of economic research pertaining to prevention, and the most difficult tasks of predicting and monetizing distal outcomes would be readily completed through predetermined models. These recommendations might be viewed as somewhat forcible, insomuch as they advocate for prescribing the details of a standard methodology and establishing a means of verifying compliance. However, it is unclear that the best practices proposed by Crowley et al. will be widely adopted in the absence of a strong and determined approach.

  12. Mining Upgrades to Reduce Pollution

    Science.gov (United States)

    Settlement with Southern Coal Corporation and 26 affiliates requires the companies to comprehensively upgrade their coal mining and processing operations to prevent polluted wastewater from threatening rivers and streams and communities across Appalachia.

  13. Federalism and entrepreneurship: Explaining American and Canadian innovation in pollution prevention and regulatory integration

    Energy Technology Data Exchange (ETDEWEB)

    Rabe, B.G.

    1999-07-01

    Conventional wisdom provides an increasingly strong endorsement of far-reaching decentralization and delegation of authority to bureaucratic agents as the most likely mechanisms to attain such central environmental policy goals as pollution prevention,cross-media regulatory integration, and development of reliable measures of environmental outcomes. Canada would appear an unusually fertile context for such innovation, given its far-reaching deference to individual provinces and their environment ministries in environmental policy. Comparative analysis of select subnational governments in Canada and the United States suggests that the states in general are far ahead of their provincial counterparts in most of these areas of innovation. Despite all the opprobrium heaped on the American environmental policy system, a combination of federal policy tools and state policy entrepreneurship appear to contribute directly to this innovation in some states and are almost completely absent in the Canadian system. These findings suggest a need for careful study of the mix of intergovernmental policy tools and principal-agent relations most likely to realize desired environmental policy goals.

  14. Pollution prevention opportunity assessment for the SNL/California waste management facilities

    International Nuclear Information System (INIS)

    Braye, S.; Phillips, N.M.

    1995-01-01

    SNL/California's waste management facilities, Bldgs. 961 and 962-2, generate a secondary stream of hazardous and radioactive waste. This waste stream is generated mainly during the processing and handling of hazardous, radioactive, and mixed wastes (primary waste stream), which are generated by the laboratories, and when cleaning up spills. The secondary waste stream begins with the removal of a generator's hazardous, radioactive, and mixed waste from specified collection areas. The waste stream ends when the containers of processed waste are loaded for shipment off-site. The total amount of secondary hazardous waste generated in the waste management facilities from January 1993 to July 1994 was 1,160.6 kg. The total amount of secondary radioactive waste generated during the same period was 1,528.8 kg (with an activity of 0.070 mCi). Mixed waste usually is not generated in the secondary waste stream. This pollution prevention opportunity assessment (PPOA) was conducted using the graded approach methodology developed by the Department of Energy (DOE) PPOA task group. The original method was modified to accommodate the needs of Sandia's site-specific processes. The options generated for potential hazardous waste minimization, cost savings, and environmental health and safety were the result of a waste minimization team effort. The results of the team efforts are summarized

  15. Pollution prevention incentives and disincentives created by the Clean Air Act

    International Nuclear Information System (INIS)

    Webb, C.F.; Wolffe, G.S.

    1998-01-01

    Environmental laws and regulations have not always been implemented in a manner that allows for the consideration of pollution prevention (P2) alternatives as a means of achieving progress toward air quality goals. Recently, the US Environmental Protection Agency (EPA) has been making strides to reinterpret laws and regulations to be more flexible and encourage P2 projects that do not involve end-of-the-pipe controls. For instance, when conducting control technology evaluations such as best available control technology (BACT) and lowest achievable emission rate (LAER), facilities can and should take into consideration P2 options that accomplish the same emission reduction goals as traditional end-of-the-pipe controls. There are also new emissions trading provisions building on those allowed in the acid rain and offset trading programs that promise to make P2 projects much more cost-effective. Several traditional 'command-and-control' programs of the Clean Air Act (CAA) also promote P2 projects. For instance, emission reductions realized through P2 projects show managers a direct cost savings due to reductions in Title V facility annual emissions fees and possibly a direct cost benefit through sale of emission credits. Furthermore, the CAA encourages P2 indirectly through the detail understanding of processes gained from emissions inventories and risk management plans (RMPs). However, many CAA prescriptive programs create disincentives for industry to select P2 alternatives. 30 refs

  16. Preliminary Assessment of Noise Pollution Prevention in Wind Turbines Based on an Exergy Approach

    Directory of Open Access Journals (Sweden)

    Ofelia A. Jianu

    2017-06-01

    Full Text Available Most existing methods for energy transformation and use are inadvertently contaminating our watersupplies, releasing greenhouse gasses into the atmosphere, emitting compounds that diminish the earth'sprotective blanket of ozone, and depleting the earth's crust of natural resources. As a result, scientists andengineers are increasingly pursuing sustainable technologies so that costs associated with global warmingcan be minimized and adverse impact on living organisms can be prevented. A promising sustainablemethod is to harness energy from the wind via wind turbines. However, the noise generated by wind turbinesproves to be one of the most significant hindrances to the extensive use of wind turbines. In this study,noise generation produced by flow over objects is investigated to characterize the noise generated due toflow-structure interaction and aeroacoustics. As a benchmark, flow over a cylinder has been chosen for thisstudy, with the aim of correlating three main characteristics in noise generation. Hence, the generated soundpressure level, exergy destroyed and the normal flow velocity (∪ ∞ are employed to characterize the systemin order to relate the exergy destruction to the noise generated in the flow. The correlation has the potentialto be used in wind turbine designs to minimize noise pollution due to aerodynamic noise.

  17. Experimental infrared measurements for hydrocarbon pollutant determination in subterranean waters

    NARCIS (Netherlands)

    Lay-Ekuakille, A.; Palamara, I.; Caratelli, D.; Morabito, F.C.

    2013-01-01

    Subterranean waters are often polluted by industrial and anthropic effluents that are drained in subsoil. To prevent and control pollution, legislations of different developed countries require an online monitoring measurement, especially for detecting organic solvents (chlorinated and unchlorinated

  18. The planned EC Directive on 'Integrated Pollution Prevention and Control' (IPC)

    International Nuclear Information System (INIS)

    Sellner, D.; Schnutenhaus, J.

    1993-01-01

    This EC Directive is intended to incorporate integrated pollution control as a mandatory obligation in the legal provisions governing industrial installations licensing within the EC. The article in hand presents an assessment of the Directive and discusses some possible impacts on the German national law in the field of pollution control, which hitherto has been defined on the basis of a preferably medium-oriented approach. A serious point of deviation from the German approach is seen in the fact that the draft's provisions relating to the licensing of industrial installations defines certain pre-conditions allowing a plant in a low-polluted area to be licensed, although the pollution control systems of the plant do not them come up to the state-of-the-art in pollution abatement technology. This is seen as a fact jeopardizing the principle of precantionary measures which has been firmly established in German pollution control law. (orig./HP) [de

  19. The effect of using low-polluting building materials on ventilation requirements and energy use in buildings

    Energy Technology Data Exchange (ETDEWEB)

    Wargocki, P.; Frontczak, M. (International Centre for Indoor Environment and Energy, Dept. of Mechanical Engineering, DTU, Kgs. Lyngby (DK)); Knudsen, Henrik N. (Danish Building Research Institute, Aalborg Univ., Hoersholm (DK))

    2007-07-01

    The main objective of the ongoing research project described in this paper was to study the potential for reducing energy used for ventilating buildings by using low-polluting building materials, without compromising the indoor air quality. To quantify this potential, the exposure-response relationships, i.e. the relationships between ventilation rate and perceived indoor air quality, were established for rooms furnished with different categories of polluting materials and the simulations of energy used for ventilation were carried out. The exposure-response relationships were based on a summary of data reported in the literature on exposure-response relationships for materials tested in laboratory settings in small-scale glass chambers, and in full-scale in climate chambers, test rooms or normal offices. New experiments were also considered in which the effect of using low-polluting materials on perceived air quality was examined in test rooms ventilated with different outdoor air supply rates, low-polluting materials being selected in small glass chambers. The results suggest that the exposure-response relationships vary between different building materials and that the perceived air quality can be improved considerably when polluting building materials are substituted with materials that pollute less. The preliminary energy simulations indicate that selecting low-polluting materials will result in considerable energy savings as a result of reducing the ventilation rates required to achieve acceptable indoor air quality. (au)

  20. Pollution prevention opportunity assessment for the K-25 Site Toxic Substances Control Act Incinerator Operations, Level III

    International Nuclear Information System (INIS)

    1995-09-01

    A Level III pollution prevention opportunity assessment (PPOA) was performed for the Oak Ridge K-25 Site Toxic Substances Control Act (TSCA) Incinerator to evaluate pollution prevention (P2) options for various waste streams: The main objective of this study was to identify and evaluate options to reduce the quantities of each waste stream generated by the TSCA Incinerator operations to realize significant environmental and/or economic benefits from P2. For each of the waste streams, P2 options were evaluated following the US Environmental Protection Agency (EPA) hierarchy to (1) reduce the quantity of waste generated, (2) recycle the waste, and/or (3) use alternate waste treatment or segregation methods. This report provides process descriptions, identification and evaluation of P2 options, and final recommendations

  1. Major weapon system environmental life-cycle cost estimating for Conservation, Cleanup, Compliance and Pollution Prevention (C3P2)

    Science.gov (United States)

    Hammond, Wesley; Thurston, Marland; Hood, Christopher

    1995-01-01

    The Titan 4 Space Launch Vehicle Program is one of many major weapon system programs that have modified acquisition plans and operational procedures to meet new, stringent environmental rules and regulations. The Environmental Protection Agency (EPA) and the Department of Defense (DOD) mandate to reduce the use of ozone depleting chemicals (ODC's) is just one of the regulatory changes that has affected the program. In the last few years, public environmental awareness, coupled with stricter environmental regulations, has created the need for DOD to produce environmental life-cycle cost estimates (ELCCE) for every major weapon system acquisition program. The environmental impact of the weapon system must be assessed and budgeted, considering all costs, from cradle to grave. The Office of the Secretary of Defense (OSD) has proposed that organizations consider Conservation, Cleanup, Compliance and Pollution Prevention (C(sup 3)P(sup 2)) issues associated with each acquisition program to assess life-cycle impacts and costs. The Air Force selected the Titan 4 system as the pilot program for estimating life-cycle environmental costs. The estimating task required participants to develop an ELCCE methodology, collect data to test the methodology and produce a credible cost estimate within the DOD C(sup 3)P(sup 2) definition. The estimating methodology included using the Program Office weapon system description and work breakdown structure together with operational site and manufacturing plant visits to identify environmental cost drivers. The results of the Titan IV ELCCE process are discussed and expanded to demonstrate how they can be applied to satisfy any life-cycle environmental cost estimating requirement.

  2. Air compliance through pollution prevention at Air Force Materiel Command facilities.

    Energy Technology Data Exchange (ETDEWEB)

    Kolpa, R.; Ryckman, S.J. Jr.; Smith, A.E.

    1999-03-19

    Options for air compliance through pollution prevention (P2) have been identified at 14 facilities of the US Air Force Materiel Command, ranging from depots with significant light industrial activity to laboratories. Previous P2 efforts concentrated on reducing hazardous and solid wastes, with any reduction in air impacts generally being a collateral benefit. This work focused on reducing air emissions and air compliance vulnerabilities. P2 options were identified in three stages. First, potentially applicable P2 options were identified from Internet and published information. Attention was given to identifying the types of sources to which an option could be applied, the option's state of development, and constraints that could limit its application. Traditional P2 options involving technology or equipment changes and material substitution were considered. In addition, newer approaches based on administrative ''controls'' were considered. These included inserting P2 into operating permits in exchange for administrative relief, privatization, derating boilers, and reducing an installation's potential to emit and compliance vulnerability by separating sources not under the Air Force's ''common control.'' Next, criteria and toxic emissions inventories by source category were prepared from inventory data supplied by facilities. The major problems at this stage were differences in the levels of detail provided by facilities and in the categories used by different installations. Emitting categories were matched to P2 option categories to identify candidate options. Candidates were screened to account for local regulations and technical information about sources in the inventories. When possible, emission reductions were estimated to help facility personnel prioritize options. Some options identified are being actively pursued by facilities to determine their site-specific feasibility. Although much work has been

  3. Pollution prevention through energy efficiency: methodology for evaluating greenhouse gas reductions

    International Nuclear Information System (INIS)

    Widge, V.; Arnold, F.; Karmali, A.

    1992-01-01

    This paper outlines an analytical framework for evaluating the potential for greenhouse gas emission reductions through investments in energy efficiency. In particular, it will describe a model called the Energy and Technology Switching (ETS) model which has been developed at ICF Incorporated. The ETS model has several useful capabilities - it can assess the implications of changing the energy efficiency of new shipments and existing stock of equipment and appliances, or even changes in patterns of fuel use. The ETS model predicts energy use, emissions of related carbon dioxide and other greenhouse gases, and private and social costs (such as energy costs, avoided capital and fuel costs). It also tracks changes in fuel and technology use over time for a user specified end-use application. The paper is organized into three parts: - The first part of the paper describes the methodology used in estimating the reduction in greenhouse gas emissions and the associated net costs of policies that could affect energy use. - In order to demonstrate the model's capabilities, in the second part of the paper, a sample analysis is presented. ICF incorporated has used the ETS model to estimate for the Global Change Division of the U.S. Environmental Protection Agency the costs of reducing greenhouse gas emissions in the residential and commercial sectors of the U.S. economy, encompassing a wide range of technologies and fuel-types. The assumptions and results of this analysis are presented. - Finally, the paper outlines some of the potential uses of this model in assessing pollution prevention opportunities through energy efficient measures. 11 figs

  4. 40 CFR 112.10 - Spill Prevention, Control, and Countermeasure Plan requirements for onshore oil drilling and...

    Science.gov (United States)

    2010-07-01

    ... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS OIL POLLUTION PREVENTION... Marine Mammal Oils; and Vegetable Oils (Including Oils from Seeds, Nuts, Fruits, and Kernels) § 112.10...

  5. Forum environmental and energy technology 2013. Power-heat cogeneration and air pollution prevention

    International Nuclear Information System (INIS)

    Carlowitz, Otto; Meyer, Sven

    2013-01-01

    The volume covers the following topics: The teaching reward 2013 - concept and implementation of the ''Forum environmental and energy technology''; energy efficient air pollution control and material recovery; air pollution control by oxidation; electrical energy production from low-temperature waste heat (ORC processes), electrical power production and process heat utilization.

  6. Progress in the prevention and control of air pollution in 1988: Report to congress. Annual report

    International Nuclear Information System (INIS)

    1990-01-01

    Contents of this study: air quality trends, monitoring, and modeling; air pollution research programs; development of national ambient air; quality standards; assessment and control of toxic air pollutants; status of air quality management programs; control of stationary source emissions; stationary source compliance; control of mobile source emissions; stratospheric ozone protection; indoor air quality; acid deposition; radon assessment and remediation; litigation

  7. Waste minimization and pollution prevention in D ampersand D operations at the Argonne National Laboratory-East site

    International Nuclear Information System (INIS)

    Boing, L.E.; Coffey, M.J.; Ditch, R.W.; Fellhauer, C.R.; Rose, R.W.

    1996-01-01

    Argonne National Laboratory (ANL) is implementing waste minimization and pollution prevention activities into its conduct of decontamination and decommissioning (D ampersand D) projects. Many of these activities are rather straight forward and simple approaches, yet they are often overlooked and not implemented as often as they should or could be. Specific activities involving recycling and reuse of materials and structures, which have proven useful in lowering decommissioning and disposal costs on D ampersand D projects at ANL are presented

  8. Environmental and risk screening for prioritizing pollution prevention opportunities in the U.S. printed wiring board manufacturing industry.

    Science.gov (United States)

    Lam, Carl W; Lim, Seong-Rin; Schoenung, Julie M

    2011-05-15

    Modern manufacturing of printed wiring boards (PWBs) involves extensive use of various hazardous chemicals in different manufacturing steps such as board preparation, circuit design transfer, etching and plating processes. Two complementary environmental screening methods developed by the U.S. EPA, namely: (i) the Tool for the Reduction and Assessment of Chemical and Other Environmental Impacts (TRACI) and (ii) Risk-Screening Environmental Indicators (RSEI), are used to quantify geographic and chemical environmental impacts in the U.S. PWB manufacturing industry based on Toxics Release Inventory (TRI) data. Although the release weight percentages of industrial chemicals such as methanol, glycol ethers and dimethylformamide comprise the larger fraction of reported air and water emissions, results indicate that lead, copper and their compounds' releases correspond to the highest environmental impact from toxicity potentials and risk-screening scores. Combining these results with further knowledge of PWB manufacturing, select alternative chemical processes and materials for pollution prevention are discussed. Examples of effective pollution prevention options in the PWB industry include spent etchant recovery technologies, and process and material substitutions. In addition, geographic assessment of environmental burden highlights states where promotion of pollution prevention strategies and emissions regulations can have the greatest effect to curb the PWB industry's toxic release impacts. Copyright © 2011 Elsevier B.V. All rights reserved.

  9. Effects of air pollution on human health and practical measures for prevention in Iran.

    Science.gov (United States)

    Ghorani-Azam, Adel; Riahi-Zanjani, Bamdad; Balali-Mood, Mahdi

    2016-01-01

    Air pollution is a major concern of new civilized world, which has a serious toxicological impact on human health and the environment. It has a number of different emission sources, but motor vehicles and industrial processes contribute the major part of air pollution. According to the World Health Organization, six major air pollutants include particle pollution, ground-level ozone, carbon monoxide, sulfur oxides, nitrogen oxides, and lead. Long and short term exposure to air suspended toxicants has a different toxicological impact on human including respiratory and cardiovascular diseases, neuropsychiatric complications, the eyes irritation, skin diseases, and long-term chronic diseases such as cancer. Several reports have revealed the direct association between exposure to the poor air quality and increasing rate of morbidity and mortality mostly due to cardiovascular and respiratory diseases. Air pollution is considered as the major environmental risk factor in the incidence and progression of some diseases such as asthma, lung cancer, ventricular hypertrophy, Alzheimer's and Parkinson's diseases, psychological complications, autism, retinopathy, fetal growth, and low birth weight. In this review article, we aimed to discuss toxicology of major air pollutants, sources of emission, and their impact on human health. We have also proposed practical measures to reduce air pollution in Iran.

  10. Effects of air pollution on human health and practical measures for prevention in Iran

    Science.gov (United States)

    Ghorani-Azam, Adel; Riahi-Zanjani, Bamdad; Balali-Mood, Mahdi

    2016-01-01

    Air pollution is a major concern of new civilized world, which has a serious toxicological impact on human health and the environment. It has a number of different emission sources, but motor vehicles and industrial processes contribute the major part of air pollution. According to the World Health Organization, six major air pollutants include particle pollution, ground-level ozone, carbon monoxide, sulfur oxides, nitrogen oxides, and lead. Long and short term exposure to air suspended toxicants has a different toxicological impact on human including respiratory and cardiovascular diseases, neuropsychiatric complications, the eyes irritation, skin diseases, and long-term chronic diseases such as cancer. Several reports have revealed the direct association between exposure to the poor air quality and increasing rate of morbidity and mortality mostly due to cardiovascular and respiratory diseases. Air pollution is considered as the major environmental risk factor in the incidence and progression of some diseases such as asthma, lung cancer, ventricular hypertrophy, Alzheimer's and Parkinson's diseases, psychological complications, autism, retinopathy, fetal growth, and low birth weight. In this review article, we aimed to discuss toxicology of major air pollutants, sources of emission, and their impact on human health. We have also proposed practical measures to reduce air pollution in Iran. PMID:27904610

  11. Effects of air pollution on human health and practical measures for prevention in Iran

    Directory of Open Access Journals (Sweden)

    Adel Ghorani-Azam

    2016-01-01

    Full Text Available Air pollution is a major concern of new civilized world, which has a serious toxicological impact on human health and the environment. It has a number of different emission sources, but motor vehicles and industrial processes contribute the major part of air pollution. According to the World Health Organization, six major air pollutants include particle pollution, ground-level ozone, carbon monoxide, sulfur oxides, nitrogen oxides, and lead. Long and short term exposure to air suspended toxicants has a different toxicological impact on human including respiratory and cardiovascular diseases, neuropsychiatric complications, the eyes irritation, skin diseases, and long-term chronic diseases such as cancer. Several reports have revealed the direct association between exposure to the poor air quality and increasing rate of morbidity and mortality mostly due to cardiovascular and respiratory diseases. Air pollution is considered as the major environmental risk factor in the incidence and progression of some diseases such as asthma, lung cancer, ventricular hypertrophy, Alzheimer′s and Parkinson′s diseases, psychological complications, autism, retinopathy, fetal growth, and low birth weight. In this review article, we aimed to discuss toxicology of major air pollutants, sources of emission, and their impact on human health. We have also proposed practical measures to reduce air pollution in Iran.

  12. Children's and Adolescents' Thoughts on Pollution: Cognitive Abilities Required to Understand Environmental Systems

    Science.gov (United States)

    Rodríguez, Manuel; Kohen, Raquel; Delval, Juan

    2015-01-01

    Pollution phenomena are complex systems in which different parts are integrated by means of causal and temporal relationships. To understand pollution, children must develop some cognitive abilities related to system thinking and temporal and causal inferential reasoning. These cognitive abilities constrain and guide how children understand…

  13. [Study on strategies of pollution prevention in coastal city of Zhejiang Province based on scenario analysis].

    Science.gov (United States)

    Tian, Jin-Ping; Chen, Lü-Jun; Du, Peng-Fei; Qian, Yi

    2013-01-01

    Scenario analysis was used to study the environmental burden in a coastal city of Zhejiang province under different patterns of economic development. The aim of this research is to propose advices on decision making by illustrating how to make emissions reduced by transforming the pattern of economic development in a developed coastal area, which had acquired the level of 70 000 yuan GDP per cap. At first, 18 heavy pollution industries were screened out, by referencing total emissions of chemical oxygen demand, ammonia-nitrogen, sulfur dioxide, and nitrogen oxide. Then, a model of scenario analysis and the back-up calculation program were designed to study the sustainable development of the heavy pollution industries. With 2008 and 2015 as the reference year and the target year respectively, emissions of four pollutants mentioned above in the 18 heavy pollution industries in the city were analyzed under six scenarios. The total emissions of 4 pollutants should be reduced to an expectant degree, which is set as the constraint prerequisite of the scenario analysis. At last, some suggestions for decision-making are put forward, which include maintaining a moderate increase rate of GDP around 7%, strengthening the adjustment of economic structure, controlling the increasing rate of industrial added value of the industries with heavy pollution, optimizing the structure of industries with heavy pollution, decreasing the intensity of waste emission by implementing cleaner production to reduce emission produce at the source, and strengthening regulations on the operation of waste treatment plants to further promote the efficiency of waste treatment. Only by implementing such measures mentioned above, can the total emissions of chemical oxygen demand, ammonia-nitrogen, sulfur dioxide, and nitrogen oxide of the 18 industries with heavy pollution in the city be reduced by a 10%, 10%, 5%, and 15% respectively based on the reference year.

  14. The Geography of the Alzheimer's Disease Mortality in Spain: Should We Focus on Industrial Pollutants Prevention?

    Science.gov (United States)

    2017-11-25

    Alzheimer's disease (AD) has a high worldwide prevalence but little is known about its aetiology and risk factors. Recent research suggests environmental factors might increase AD risk. We aim to describe the association between AD mortality and the presence of highly polluting industry in small areas in Spain between 1999 and 2010. We calculated AD age-adjusted Standardized Mortality Ratio (SMR), stratified by sex, grouped by industrial pollution density, compared for each small area of Spain. In the small areas with the highest mortality, the SMR among women was at least 25% greater than the national average (18% in men). The distribution of AD mortality was generally similar to that of high industrial pollution (higher mortality in the north, the Mediterranean coast and in some southern areas). The risk of AD mortality among women was 140% higher (123% among men) in areas with the highest industrial density in comparison to areas without polluting industries. This study has identified a geographical pattern of small areas with higher AD mortality risk and an ecological positive association with the density of highly polluting industry. Further research is needed on the potential impact of this type of industry pollution on AD aetiology and mortality.

  15. Investment strategy for sustainable society by development of regional economies and prevention of industrial pollutions in Japanese manufacturing sectors

    International Nuclear Information System (INIS)

    Sueyoshi, Toshiyuki; Goto, Mika

    2014-01-01

    A balance between industrial pollution prevention and economic growth becomes a world-wide issue to develop a sustainable society in many industrial nations. To discuss the issue, this study proposes a new use of DEA environmental assessment to determine how to effectively allocate capital for developing regional industries. The amount of capital is used to invest for technology innovation for both local economic growth and environmental protection. In this study, the proposed approach separates outputs into desirable and undesirable categories. Inputs are also separated into two categories, one of which indicates an amount of investment on capital assets. The other category is used for production activities. The proposed approach unifies them by two disposability concepts. This study has evaluated the performance of manufacturing industries in 47 prefectures (local government units in Japan) by Unified Efficiency under Natural disposability (UEN), Unified Efficiency under Managerial disposability (UEM) and Unified Efficiency under Natural and Managerial disposability (UENM). The UENM is further separated into its two cases: with and without a possible occurrence on desirable congestion, or technology innovation, on undesirable outputs. This study has empirically confirmed that Japanese manufacturing industries need to make their efforts to reduce greenhouse gas emissions and air pollution substances by investing in technology innovation. Furthermore, most of economic activities are currently located at metropolitan regions (e.g., Tokyo) in Japan. To develop a sustainable society, Japan needs to allocate capital into regions with a high level of investment effectiveness by shifting the manufacturing industries from the metropolitan regions to much promising local areas identified in this study. Such a shift, along with technology innovation, makes it possible to reduce air pollutions in the entire Japan by balancing economic growth and pollution prevention. This

  16. CHIRAL CHEMISTRY OF PESTICIDES IN THE ENVIRONMENT WITH IMPLICATIONS FOR POLLUTION PREVENTION

    Science.gov (United States)

    Upwards of 25% of pesticides and other toxic pollutants are chiral; that is, they exist as two mirror image species called enantiomers. The enantiomers of a chiral compound have identical physical and abiotic chemical properties, but differ in biological properties such as microb...

  17. Turbo-gas emissions and integrated pollution prevention and control (IPPC)

    International Nuclear Information System (INIS)

    Mariani, M.; Sera, B.

    2005-01-01

    The present paper considers the gas-turbine pollution and joints out that the NO, is the most important pollutant among others pollutants as well as the carbon oxide and the volatile organic compounds because the NO x , has a high mass production rate (in the combustion chamber), elevated toxicity to the ecosystem and because of being in the atmosphere a precursor of secondary ultrafine particles PM 2,5 . In with reference to the integrated pollution and control (IPPC) the job shows schemes of chain chemical reactions which are on the base of the formation of different types of NO x , thermal and organic, and it illustrates the influence of some operative parameters on the combustion's efficiency and then on the NO x , production rate. Also, the study gives the best absolvable techniques (BAT) to reduce the NO x , production rate and to demolish it before its introduction, as well as gas exhaust, in the atmosphere. At the end, the work shows that the gas-turbine are to consider thermal engines with a little environment impact index specially when they make use of the natural gas, as well as fuel [it

  18. WET-WEATHER POLLUTION PREVENTION THROUGH MATERIALS SUBSTITUTION AS PART OF INDUSTRIAL CONSTRUCTION

    Science.gov (United States)

    A literature review of urban stormwater runoff and building/construction materials has shown that many materials such as galvanized metal, concrete, asphalt, and wood products, have the potential to release pollutants into urban stormwater runoff and snowmelt. However, much of th...

  19. Pollution prevention, preparedness, and response coordination efforts between the US Coast Guard and Coastal, Great Lakes, and Inland River states

    International Nuclear Information System (INIS)

    Donohoe, M.J.; Russell, B.A.; Clark, P.

    1993-01-01

    Following the passage of the Oil Pollution Act of 1990 (OPA 90) and increased public demands for action in the wake of the Exxon Valdez oil spill, many states are now aggressively redefining and expanding their marine safety and marine environmental protection programs. The US Coast Guard is developing a program to coordinate these efforts with the aim toward minimizing duplicative requirements, leveraging resources, and eliminating barriers to marine transportation due to widely differing federal and state regulations

  20. Pollution Prevention through Peer Education: A Community Health Worker and Small and Home-Based Business Initiative on the Arizona-Sonora Border.

    Science.gov (United States)

    Ramírez, Denise Moreno; Ramírez-Andreotta, Mónica D; Vea, Lourdes; Estrella-Sánchez, Rocío; Wolf, Ann Marie A; Kilungo, Aminata; Spitz, Anna H; Betterton, Eric A

    2015-09-09

    Government-led pollution prevention programs tend to focus on large businesses due to their potential to pollute larger quantities, therefore leaving a gap in programs targeting small and home-based businesses. In light of this gap, we set out to determine if a voluntary, peer education approach led by female, Hispanic community health workers (promotoras) can influence small and home-based businesses to implement pollution prevention strategies on-site. This paper describes a partnership between promotoras from a non-profit organization and researchers from a university working together to reach these businesses in a predominately Hispanic area of Tucson, Arizona. From 2008 to 2011, the promotora-led pollution prevention program reached a total of 640 small and home-based businesses. Program activities include technical trainings for promotoras and businesses, generation of culturally and language appropriate educational materials, and face-to-face peer education via multiple on-site visits. To determine the overall effectiveness of the program, surveys were used to measure best practices implemented on-site, perceptions towards pollution prevention, and overall satisfaction with the industry-specific trainings. This paper demonstrates that promotoras can promote the implementation of pollution prevention best practices by Hispanic small and home-based businesses considered "hard-to-reach" by government-led programs.

  1. Pollution Prevention through Peer Education: A Community Health Worker and Small and Home-Based Business Initiative on the Arizona-Sonora Border

    Science.gov (United States)

    Moreno Ramírez, Denise; Ramírez-Andreotta, Mónica D.; Vea, Lourdes; Estrella-Sánchez, Rocío; Wolf, Ann Marie A.; Kilungo, Aminata; Spitz, Anna H.; Betterton, Eric A.

    2015-01-01

    Government-led pollution prevention programs tend to focus on large businesses due to their potential to pollute larger quantities, therefore leaving a gap in programs targeting small and home-based businesses. In light of this gap, we set out to determine if a voluntary, peer education approach led by female, Hispanic community health workers (promotoras) can influence small and home-based businesses to implement pollution prevention strategies on-site. This paper describes a partnership between promotoras from a non-profit organization and researchers from a university working together to reach these businesses in a predominately Hispanic area of Tucson, Arizona. From 2008 to 2011, the promotora-led pollution prevention program reached a total of 640 small and home-based businesses. Program activities include technical trainings for promotoras and businesses, generation of culturally and language appropriate educational materials, and face-to-face peer education via multiple on-site visits. To determine the overall effectiveness of the program, surveys were used to measure best practices implemented on-site, perceptions towards pollution prevention, and overall satisfaction with the industry-specific trainings. This paper demonstrates that promotoras can promote the implementation of pollution prevention best practices by Hispanic small and home-based businesses considered “hard-to-reach” by government-led programs. PMID:26371028

  2. Pollution Prevention through Peer Education: A Community Health Worker and Small and Home-Based Business Initiative on the Arizona-Sonora Border

    Directory of Open Access Journals (Sweden)

    Denise Moreno Ramírez

    2015-09-01

    Full Text Available Government-led pollution prevention programs tend to focus on large businesses due to their potential to pollute larger quantities, therefore leaving a gap in programs targeting small and home-based businesses. In light of this gap, we set out to determine if a voluntary, peer education approach led by female, Hispanic community health workers (promotoras can influence small and home-based businesses to implement pollution prevention strategies on-site. This paper describes a partnership between promotoras from a non-profit organization and researchers from a university working together to reach these businesses in a predominately Hispanic area of Tucson, Arizona. From 2008 to 2011, the promotora-led pollution prevention program reached a total of 640 small and home-based businesses. Program activities include technical trainings for promotoras and businesses, generation of culturally and language appropriate educational materials, and face-to-face peer education via multiple on-site visits. To determine the overall effectiveness of the program, surveys were used to measure best practices implemented on-site, perceptions towards pollution prevention, and overall satisfaction with the industry-specific trainings. This paper demonstrates that promotoras can promote the implementation of pollution prevention best practices by Hispanic small and home-based businesses considered “hard-to-reach” by government-led programs.

  3. National Pollutant Discharge Elimination System (NPDES) Permit Application Requirement for Storm Water Discharges

    Science.gov (United States)

    1991-05-01

    ee40 CFR Subchap- ter N to determine which polutants are likhd in effluent guidelines) or any pollutant rsted in the faci 14’s NPDES permit for its...Giease Phosphorus. Total Radioactivity Sulfate Sulfide Sutfite Surfactants Aluminum, Total Barium. Total Boron. Total Cobalt. Total liron. Total Magnesium

  4. Review of Agricultural Plastic Mulching and Its Residual Pollution and Prevention Measures In China

    Directory of Open Access Journals (Sweden)

    YAN Chang-rong

    2014-04-01

    Full Text Available Agricultural plastic film mulching is one of important technologies, but the plastic film pollution has been a serious issue for agri-cultural sustainable development in China. System analysis of this technique and its residue pollution and control ways have vital practicalsignificance for rational application of agricultural plastil film. In this paper, on the basis of our previous work,agricultural plastic filmmulching, its residue pollution and control technologies were concluded. Some important conclusions were found that, the amount of plasticfilm and mulching area had kept increasing with annual increasing rate about 8% since the 80s of the 20th century. From 1991 to 2011, thedensity of plastic film utilized increased 3-10 times, but it has very sharply different spatial pattern in different province. In general, the northand west China has high value, and the increase rate is also huge in the past 20 years. The crops of utilized mulching plastic film have extendedfrom cash crops to grain crops, and the order of crop area is followed by maize, vegetable, cotton, tobacco and peanut. The main functions ofmulching plastic film are keeping soil moisture and increasing soil temperature, against weeds and insect. At the same time, its side effectsappear with continuous utilization. The main problems are residues left in soil to destroy soil structure, impress soil permeability, impede seedgermination as well as water and nutrients uptaking, and block crop root system development. It has very serious pollution for the field utilizedplastic mulching film for long term. The residual amount in soil is about 71.9-259.1 kg·hm-2, and has sharply spatial difference. The residualamount in soil. In Northwest China, is more serious than that in North China and Southwest China. Because of difference of tillage and appli-canon ways, there are great differences on the area and shape of the plastic film piece left in soil. The main types of shapes are flaky

  5. Geostatistical approach for assessing soil volumes requiring remediation: validation using lead-polluted soils underlying a former smelting works.

    Science.gov (United States)

    Demougeot-Renard, Helene; De Fouquet, Chantal

    2004-10-01

    Assessing the volume of soil requiring remediation and the accuracy of this assessment constitutes an essential step in polluted site management. If this remediation volume is not properly assessed, misclassification may lead both to environmental risks (polluted soils may not be remediated) and financial risks (unexpected discovery of polluted soils may generate additional remediation costs). To minimize such risks, this paper proposes a geostatistical methodology based on stochastic simulations that allows the remediation volume and the uncertainty to be assessed using investigation data. The methodology thoroughly reproduces the conditions in which the soils are classified and extracted at the remediation stage. The validity of the approach is tested by applying it on the data collected during the investigation phase of a former lead smelting works and by comparing the results with the volume that has actually been remediated. This real remediated volume was composed of all the remediation units that were classified as polluted after systematic sampling and analysis during clean-up stage. The volume estimated from the 75 samples collected during site investigation slightly overestimates (5.3% relative error) the remediated volume deduced from 212 remediation units. Furthermore, the real volume falls within the range of uncertainty predicted using the proposed methodology.

  6. Clean/alternative fueled fleet programs - 1990 Amendments to the Clean Air Act, the Colorado Air Pollution Prevention and Control Act, and Denver City and County regulations

    International Nuclear Information System (INIS)

    Bowles, S.L.; Manderino, L.A.

    1993-01-01

    Despite substantial regulations for nearly two decades, attainment of this ambient standards for ozone and carbon monoxide (CO) remain difficult goals to achieve, Even with of ozone precursors and CO. The 1990 Amendments to the Clean Air Act (CAA90) prescribe further reductions of mobile source emissions. One such reduction strategy is using clean fuels, such as methanol, ethanol, or other alcohols (in blends of 85 percent or more alcohol with gasoline or other fuel), reformulated gasoline or diesel, natural gas, liquified petroleum gas, hydrogen, or electricity. There are regulatory measures involving special fuels which will be required in areas heavily polluted with ozone and CO. The state of Colorado recently passed the 1992 Air Pollution Prevention and Control Act which included provisions for the use of alternative fuels which will be implemented in 1994. In addition to adhering to the Colorado state regulations, the city and county of Denver also have regulations pertaining to the use of alternative fuels in fleets of 10 or more vehicles. Denver's program began in 1992. This paper will address the issue of fleet conversion and its impact on industry in Colorado, and Denver in particular

  7. Stormwater Pollution Prevention Plan for the TA-60-01 Heavy Equipment Shop, Los Alamos National Laboratory, Revision 3, January 2018

    Energy Technology Data Exchange (ETDEWEB)

    Burgin, Jillian Elizabeth [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2018-02-01

    This Storm Water Pollution Prevention Plan (SWPPP) was developed in accordance with the provisions of the Clean Water Act (33 U.S.C. §§1251 et seq., as amended), and the Multi-Sector General Permit for Storm Water Discharges Associated with Industrial Activity (U.S. EPA, June 2015) issued by the U.S. Environmental Protection Agency (EPA) for the National Pollutant Discharge Elimination System (NPDES) and using the industry specific permit requirements for Sector P-Land Transportation and Warehousing as a guide. This SWPPP applies to discharges of stormwater from the operational areas of the TA-60-01 Heavy Equipment Shop at Los Alamos National Laboratory. Los Alamos National Laboratory (also referred to as LANL or the “Laboratory”) is owned by the Department of Energy (DOE), and is operated by Los Alamos National Security, LLC (LANS). Throughout this document, the term “facility” refers to the TA-60-01 Heavy Equipment Shop and associated areas. The current permit expires at midnight on June 4, 2020.

  8. Stormwater Pollution Prevention Plan for the TA-03-38 Metals Fabrication Shop, Los Alamos National Laboratory, Revision 3, January 2018

    Energy Technology Data Exchange (ETDEWEB)

    Burgin, Jillian Elizabeth [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2018-02-01

    This Storm Water Pollution Prevention Plan (SWPPP) was developed in accordance with the provisions of the Clean Water Act (33 U.S.C. §§1251 et seq., as amended), and the Multi-Sector General Permit for Storm Water Discharges Associated with Industrial Activity (U.S. EPA, June 2015) issued by the U.S. Environmental Protection Agency (EPA) for the National Pollutant Discharge Elimination System (NPDES) and using the industry specific permit requirements for Sector AA-Fabricated Metal Products as a guide. This SWPPP applies to discharges of stormwater from the operational areas of the TA-03-38 Metals Fabrication Shop at Los Alamos National Laboratory. Los Alamos National Laboratory (also referred to as LANL or the “Laboratory”) is owned by the Department of Energy (DOE), and is operated by Los Alamos National Security, LLC (LANS). Throughout this document, the term “facility” refers to the TA-03-38 Metals Fabrication Shop and associated areas. The current permit expires at midnight on June 4, 2020.

  9. Stormwater Pollution Prevention Plan for the TA-03-22 Power and Steam Plant, Los Alamos National Laboratory, Revision 3, January 2018

    Energy Technology Data Exchange (ETDEWEB)

    Burgin, Jillian Elizabeth [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2018-02-01

    This Storm Water Pollution Prevention Plan (SWPPP) was developed in accordance with the provisions of the Clean Water Act (33 U.S.C. §§1251 et seq., as amended), and the Multi-Sector General Permit for Storm Water Discharges Associated with Industrial Activity (U.S. EPA, June 2015) issued by the U.S. Environmental Protection Agency (EPA) for the National Pollutant Discharge Elimination System (NPDES) and using the industry specific permit requirements for Sector O-Steam Electric Generating Facilities as a guide. This SWPPP applies to discharges of stormwater from the operational areas of the TA-03-22 Power and Steam Plant at Los Alamos National Laboratory. Los Alamos National Laboratory (also referred to as LANL or the “Laboratory”) is owned by the Department of Energy (DOE), and is operated by Los Alamos National Security, LLC (LANS). Throughout this document, the term “facility” refers to the TA-03-22 Power and Steam Plant and associated areas. The current permit expires at midnight on June 4, 2020.

  10. Stormwater Pollution Prevention Plan for the TA-03-38 Carpenter's Shop, Los Alamos National Laboratory, Revision 3, January 2018

    Energy Technology Data Exchange (ETDEWEB)

    Burgin, Jillian Elizabeth [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2018-02-01

    This Storm Water Pollution Prevention Plan (SWPPP) was developed in accordance with the provisions of the Clean Water Act (33 U.S.C. §§1251 et seq., as amended), and the Multi-Sector General Permit for Storm Water Discharges Associated with Industrial Activity (U.S. EPA, June 2015) issued by the U.S. Environmental Protection Agency (EPA) for the National Pollutant Discharge Elimination System (NPDES) and using the industry specific permit requirements for Sector A–Timber Products, Subsector A4 (Wood Products Facilities not elsewhere classified) as a guide. This SWPPP applies to discharges of stormwater from the operational areas of the TA-03-38 Carpenter’s Shop at Los Alamos National Laboratory. Los Alamos National Laboratory (also referred to as LANL or the “Laboratory”) is owned by the Department of Energy (DOE), and is operated by Los Alamos National Security, LLC (LANS). Throughout this document, the term “facility” refers to the TA-03-38 Carpenter’s Shop and associated areas. The current permit expires at midnight on June 4, 2020.

  11. A joint prevention and control mechanism for air pollution in the Beijing-Tianjin-Hebei region in china based on long-term and massive data mining of pollutant concentration

    Science.gov (United States)

    Wang, Hongbo; Zhao, Laijun

    2018-02-01

    China's Beijing-Tianjin-Hebei (BTH) region suffers from the country's worst air pollution. The problem has caused widespread concern both at home and abroad. Based on long-term and massive data mining of PM2.5 and PM10 concentration, we found that these pollutants showed similar variations in four seasons, but the most severe pollution was in winter. Through cluster analysis of the winter daily average concentration (DAC) of the two pollutants, we defined regions with similar variations in pollutant concentrations in winter. For the most polluted cities in BTH, the relationship between correlation coefficients for winter DAC and the distance between cities revealed that PM2.5 has regional, large-scale characteristics, with concentrated outbreaks, whereas PM10 has local, small-scale characteristics, with outbreaks at multiple locations. By selecting the key cities with the strongest linear relationship between the pollutant's DAC of each city and the daily individual air quality index values of the BTH region and through cluster analysis on the correlations between the pollutant DACs of the key cities, we defined regional divisions suitable for Joint Prevention and Control of Atmospheric Pollution (JPCAP) program to control PM2.5 and PM10. Comprehensively considering the degree of influence of regional atmospheric pollution control (RAPC) on air quality in BTH, as well as the elasticity and urgency of RAPC, we defined the control grades of the JPCAP regions. We found both the regions and corresponding control grades were consistent for PM2.5 and PM10. The thinking and methods of atmospheric pollution control we proposed will have broad significance for implementation of RAPC in other regions around the world.

  12. Oil pollution

    International Nuclear Information System (INIS)

    Mankabady, Samir.

    1994-08-01

    Oil enters the marine environment when it is discharged, or has escaped, during transport, drilling, shipping, accidents, dumping and offshore operations. This book serves as a reference both on the various complex international operational and legal matters of oil pollution using examples such as the Exxon Valdez, the Braer and Lord Donaldson's report. The chapters include the development of international rules on the marine environment, the prevention of marine pollution from shipping activities, liability for oil pollution damage, the conflict of the 1990 Oil Pollution Act and the 1992 protocols and finally the cooperation and response to pollution incidents. (UK)

  13. Prevention of oil spill pollution in sea water using locally available materials

    International Nuclear Information System (INIS)

    Anisuddin, S.; Al-Hashar, Naseer A.; Tahseen, S.

    2005-01-01

    Oil spill pollution, a severe environmental problem, which persists in marine environment or in inland water across the world, has grown to an alarming magnitude with increased levels of oil production and transport. The causes oil pollution are categorized as either accidental or operational, wherever oil is produced, transported, stored and used on the surface of sea or land. Hence, it is almost impossible for marine life to be freed from the adverse affects of oil spill, through the discharge of oil is controlled by an international convention. Prime concern for the health of marine life has created an instinct for undertaking this study by authors. Objectives of the present work include testing of four different local materials in separating oil from having different oil concentrations, and their efficiency of removal. The work also focuses on effect of time of contact and dosage of materials used for oil removal. Corchorus depressus locally available has proved to be more effective when compared to other materials utilized in addressing oil-spill related problems. At the same time its byproducts do not give rise to unwanted hazards to marine life. (author)

  14. The Paris Convention for the prevention of marine pollution from land-based sources

    International Nuclear Information System (INIS)

    Dinkloh, L.; Braun, H.

    1983-01-01

    The Paris Convention of 1974 which entered into force at an international level in 1978 is an important instrument to protect the North Sea and the North Atlantic against pollution from land-based sources. Contracting Parties are practically all riparian states of its scope of application - 13 states on the whole - as well as the EC. There is a survey of the functions, organization and working method, the instruments and results so far achieved in the framework of the Convention. Priority was so far given to the following substances or, respectively, groups of substances: oil, mercury, cadmium, drines, PCB's and PCT's as well as titanium dioxide. In this respect, it was above all agreed on: emission and immission standards (or guide values, respectively), recommendations for measures reducing emissions and a number of obligations to report. Studies and discussions on organosilicone compounds, radioactivity, water pollution through the atmosphere and eutrophication phenomena are relatively new. The opportunities offered by the Paris Convention have not yet been fully used. (orig.) [de

  15. Amoco-US Environmental Protection Agency, pollution prevention project, Yorktown, Virginia: Project peer review. Report of the Peer Review Committee of the Amoco/EPA Pollution Prevention Project at the Yorktown, Virginia refinery

    International Nuclear Information System (INIS)

    Klee, H.; Podar, M.

    1991-01-01

    The Amoco/EPA Pollution Prevention Project involved a number of representatives from federal and Virginia regulatory agencies, and Amoco's refining business. Participants believed that the Project could benefit from a broader perspective than these organizations along might provide. The Project Work Group selected an independent Peer Review Process which was conducted by Resource for the Future (RFF), a Washington DC think tank. A group of technical, policy and environmental experts from diverse backgrounds served as Peer Review members. The Peer Review Committee met on three occasions to discuss (1) the Project Work Plan (2) sampling data and interpretation and (3) project conclusions and recommendations. The focus of the meeting was on the general scope and content of the project

  16. US College and University Student Health Screening Requirements for Tuberculosis and Vaccine-Preventable Diseases, 2012

    Science.gov (United States)

    Jewett, Amy; Bell, Teal; Cohen, Nicole J.; Buckley, Kirsten; Leino, E. Victor; Even, Susan; Beavers, Suzanne; Brown, Clive; Marano, Nina

    2016-01-01

    Objective: Colleges are at risk for communicable disease outbreaks because of the high degree of person-to-person interactions and relatively crowded dormitory settings. This report describes the US college student health screening requirements among US resident and international students for tuberculosis (TB) and vaccine-preventable diseases…

  17. 40 CFR 112.9 - Spill Prevention, Control, and Countermeasure Plan Requirements for onshore oil production...

    Science.gov (United States)

    2010-07-01

    ... measures required under § 112.7(c)(1), except when draining uncontaminated rainwater. Prior to drainage... with legally approved methods. (2) Inspect at regularly scheduled intervals field drainage systems... prevention and containment procedures listed under this section. (b) Oil production facility drainage. (1) At...

  18. 40 CFR Table 4 to Subpart F of... - Organic Hazardous Air Pollutants Subject to Cooling Tower Monitoring Requirements in § 63.104

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 9 2010-07-01 2010-07-01 false Organic Hazardous Air Pollutants Subject to Cooling Tower Monitoring Requirements in § 63.104 4 Table 4 to Subpart F of Part 63 Protection... 4 Table 4 to Subpart F of Part 63—Organic Hazardous Air Pollutants Subject to Cooling Tower...

  19. Development of a Real-Time Environmental Monitoring System, Life Cycle Assessment Systems, and Pollution Prevention Programs

    Science.gov (United States)

    Kocher, Walter M.

    2003-01-01

    Pollution prevention (P2) opportunities and Greening the Government (GtG) activities, including the development of the Real-Time Environmental Monitoring System (RTEMS), are currently under development at the NASA Glenn Research Center. The RTEMS project entails the ongoing development of a monitoring system which includes sensors, instruments, computer hardware and software, plus a data telemetry system.Professor Kocher has been directing the RTEMS project for more than 3 years, and the implementation of the prototype system at GRC will be a major portion of his summer effort. This prototype will provide mulitmedia environmental monitoring and control capabilities, although water quality and air emissions will be the immediate issues addressed this summer. Applications beyond those currently identified for environmental purposes will also be explored.

  20. The IAEA's work for the convention on the prevention of marine pollution by dumping of wastes and other matter

    International Nuclear Information System (INIS)

    Phuong, H.V.

    1976-01-01

    One of the several techniques for the disposal of radioactive waste which has been used by some countries, often as a combined international operation, is sea-disposal under carefully controlled conditions. The waste is placed in drums encased in concrete and dumped in selected known ocean areas, currently at least 4000 metres in depth and well away from fishing grounds. The International Atomic Energy Agency is, therefore, directly addressed to by the Convention on the Prevention of Marine Pollution by Dumping of Wastes and Other Matter as the competent international body to work out safety criteria, conditions and procedures and to draw up recommendations for the implementation of the Convention with regard to radioactive materials. (author)

  1. [Pollution prevention and control of aqueous extract of astragali radix processed with ZrO2 inorganic ceramic membrane micro-filtration].

    Science.gov (United States)

    Pan, Lin-Men; Huang, Min-Yan; Guo, Li-Wei

    2012-11-01

    To study the measures for preventing and controlling the pollution of aqueous extract of Astragali Radix proceeded with inorganic ceramic membrane micro-filtration, in order to find effective measures for preventing and controlling the membrane pollution. The resistance distribution, polymer removal and changes in physical and chemical parameters of the zirconium oxide film of different pore diameters were determined to analyze the state or location of pollutants as well as the regularity of formation. Meanwhile, recoil and ultrasonic physical measures were adopted to strengthen the membrane process, in order to explore the methods for preventing and controlling the membrane pollution. When 0.2 microm of ZrO2 micro-filtrated aqueous extract of Astragali Radix, the rate of pollution was as high as 44.9%. The hole blocking resistance and the concentration polarization resistance were the main filtration resistances, while the surface deposit resistance decreased with the increase in the membrane's hold diameter; after micro-filtration, the liquid turbidity significantly reduced, with slight changes in both pH and viscosity. The 0.2 microm ZrO2 micro-filtration membrane performed better than the 0.05 microm pore size membrane in terms of conductivity. The 0. 2 microm and 0.05 microm pore diameter membranes showed better performance in the removal of pectin. The ultrasonic measure to strengthen membranes is more suitable to this system, with a flux rate up by 41.7%. The membrane optimization process adopts appropriate measures for preventing and controlling the membrane pollution, in order to reduce the membrane pollution, recover membrane performance and increase filtration efficiency.

  2. Control and Prevention of Wastewater Pollution From Amerya Petroleum Refining Company

    International Nuclear Information System (INIS)

    Bakry, A.A.

    2004-01-01

    An oil refinery normally uses large quantities of water, for cooling and other process purpose. This water is treated from contaminants and finally returned to a lake or sea, outside the refinery. Amerya Petroleum Refining Company (APRC) uses conventional and special treatment methods for wastewater to remove all pollutants and to reduce the oil content in refinery final effluent water to a limit of 10 ppm , as the maximum permissible limit for environmental protection as designated by the Egyptian Act No.4 for the year 1994 . About 80% of oil in wastewater is separated by API (American Petroleum Institute) separator method and returned to refinery. Small oil droplets, emulsion and suspended matter escaped from API separator but were removed successfully in the dissolved air flotation (DAF) with chemical additives as the secondary treatment stage for wastewater. The flotation method with chemical additives and filtration were used to reduce the suspended solids and oil content to permissible levels (10 ppm) Furthermore, biological treatment unit was constructed to remove the dissolved oxygen consuming contaminates, e.g. phenolic compounds and traces of hydrocarbon derivatives. It was found that the BOD and COD of the effluent were reduced, and 100% removal of the trace amount of phenol was achieved in effluent

  3. Waste minimization concepts applied to oil spill response or (integrating the Pollution Prevention Act of 1990 with the Oil Pollution Act of 1990)

    International Nuclear Information System (INIS)

    Ferriere, D.V.

    1993-01-01

    As of July 23, 1993 the National Contingency Plan (NCP) for oil spills and hazardous substance releases (40CFR300) is being revised to comply with Oil Pollution Act 1990 (OPA '90) requirements. An important OPA '90 development is the creation of localized groups to write Area Contingency Plans (ACPs). During the ACP process many political, economical, and environmental issues will be addressed by representatives from several local, county, state, federal agencies and industry. Some of the difficulty decision makers must face is weighing environmental tradeoffs considering socio-economic aspects and determining what is the most effective ecologically sensible/environmental protection oil spill response strategy. Ideally, the NCP is designed as a democratic process providing a voice to all effected parties on how to best protect the environment, natural resources, and commercial resources. However, practice has shown successful emergency response is best handled when a single focal point of command, commonly referred to as incident command, has an agreed upon response agenda. The following will address the need for decision makers and contingency planners to at least address waste minimization principles, if not make it their primary focus, when developing and executing the oil spill response plan

  4. Microbiological Surveillance and State of the Art Technological Strategies for the Prevention of Dialysis Water Pollution

    Directory of Open Access Journals (Sweden)

    Andrea Galfrè

    2012-08-01

    Full Text Available Methods: The present report attempts to illustrate the positive impact on the microbiological quality of dialysis patients over a 15-year period through the progressive implementation of state-of-the-art technological strategies and the optimization of microbiological surveillance procedures in five dialysis units in Sardinia. Results: Following on better microbiological, quality controls of dialysis water and improvement of procedures and equipment, a drastic improvement of microbiological water quality was observed in a total of 945 samples. The main aim was to introduce the use of microbiological culture methods as recommended by the most important guidelines. The microbiological results obtained have led to a progressive refining of controls and introduction of new materials and equipment, including two-stage osmosis and piping distribution rings featuring a greater capacity to prevent biofilm adhesion. The actions undertaken have resulted in unexpected quality improvements. Conclusions: Dialysis water should be viewed by the nephrologist as a medicinal product exerting a demonstrable positive impact on microinflammation in dialysis patients. A synergic effort between nephrologists and microbiologists undoubtedly constitutes the most effective means of preventing dialysis infections.

  5. Microbiological surveillance and state of the art technological strategies for the prevention of dialysis water pollution.

    Science.gov (United States)

    Bolasco, Piergiorgio; Contu, Antonio; Meloni, Patrizia; Vacca, Dorio; Galfrè, Andrea

    2012-08-01

    The present report attempts to illustrate the positive impact on the microbiological quality of dialysis patients over a 15-year period through the progressive implementation of state-of-the-art technological strategies and the optimization of microbiological surveillance procedures in five dialysis units in Sardinia. Following on better microbiological, quality controls of dialysis water and improvement of procedures and equipment, a drastic improvement of microbiological water quality was observed in a total of 945 samples. The main aim was to introduce the use of microbiological culture methods as recommended by the most important guidelines. The microbiological results obtained have led to a progressive refining of controls and introduction of new materials and equipment, including two-stage osmosis and piping distribution rings featuring a greater capacity to prevent biofilm adhesion. The actions undertaken have resulted in unexpected quality improvements. Dialysis water should be viewed by the nephrologist as a medicinal product exerting a demonstrable positive impact on microinflammation in dialysis patients. A synergic effort between nephrologists and microbiologists undoubtedly constitutes the most effective means of preventing dialysis infections.

  6. Design of Polymeric Nanofiber Gauze Mask to Prevent Inhaling PM2.5 Particles from Haze Pollution

    Directory of Open Access Journals (Sweden)

    Xingzhou Li

    2015-01-01

    Full Text Available Recently, PM2.5 (particulate matter with diameter of 2.5 micron or less has become a major health hazard from the polluted air in many cities in China. The regular gauze masks are used to prevent inhaling the PM2.5 fine particles; however, those masks are not able to filter out the PM2.5 because of the large porosity of the mask materials. Some well-prevented masks usually have poor breathability, which increases other health risks. In this study, a polysulfone based nanofiber for mask filtration material was synthesized by electrospinning. That nanofiber mask material was characterized by SEM, air permeability test, and PM2.5 trapping experiment. The results indicate that nanofiber mask material can efficiently filter out the PM2.5 particles and simultaneously preserve a good breathability. We attribute such improvement to the nanoscaled fibers, having the same porosity as that of regular gauze mask but with extremely reduced local interfiber space.

  7. An integrated approach to manage coastal ecosystems and prevent marine pollution effects

    Science.gov (United States)

    Marcelli, Marco; Bonamano, Simone; Carli, Filippo Maria; Giovacchini, Monica; Madonia, Alice; Mancini, Emanuele; Molino, Chiara; Piermattei, Viviana; Manfredi Frattarelli, Francesco

    2016-04-01

    This work focuses an integrated approach based on Sea-Use-Map (SUM), backed by a permanent monitoring system (C-CEMS-Civitavecchia Coastal Environmental Monitoring System). This tool supports the management of the marine coastal area, contributing substantially to ecosystem benefits evaluation and to minimize pollution impacts. Within the Blue Growth strategy, the protection of marine ecosystems is considered a priority for the sustainable growth of marine and maritime sectors. To face this issue, the European MSP and MSFD directives (2014/89/EU; 2008/56/EC) strongly promote the adoption of an ecosystem-based approach, paying particular attention to the support of monitoring networks that use L-TER (long-term ecological research) observations and integrate multi-disciplinary data sets. Although not largely used in Europe yet, the Environmental Sensitivity Index (ESI), developed in 1979 by NOAA (and promoted by IMO in 2010), can be considered an excellent example of ecosystem-based approach to reduce the environmental consequences of an oil spill event in a coastal area. SUM is an ecosystem oriented cartographic tool specifically designed to support the sustainable management of the coastal areas, such as the selection of the best sites for the introduction of new uses or the identification of the coastal areas subjected to potential impacts. It also enables a rapid evaluation of the benefits produced by marine areas as well as of their anthropogenic disturbance. SUM integrates C-CEMS dataset, geomorphological and ecological features and knowledge on the coastal and maritime space uses. The SUM appliance allowed to obtain relevant operational results in the Civitavecchia coastal area (Latium, Italy), characterized by high variability of marine and coastal environments, historical heritage and affected by the presence of a big harbour, relevant industrial infrastructures, and touristic features. In particular, the valuation of marine ecosystem services based on

  8. 76 FR 58835 - Information Collection Activity: Revision for Subpart C, Pollution Prevention and Control...

    Science.gov (United States)

    2011-09-22

    ... do not exceed required emission levels; Discharge or disposal of drill cuttings, sand, and other well... Agency (EPA) promulgated National Ambient Air Quality Standards (NAAQS) for ozone, fine (i.e., 2.5 ), and... activities in the GOMR. This data will be used in future regional air quality modeling in support of...

  9. 25 CFR 63.36 - What are the special requirements for Indian child protection and family violence prevention...

    Science.gov (United States)

    2010-04-01

    ... protection and family violence prevention programs? 63.36 Section 63.36 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR TRIBAL GOVERNMENT INDIAN CHILD PROTECTION AND FAMILY VIOLENCE PREVENTION Indian Child Protection and Family Violence Prevention Program § 63.36 What are the special requirements for...

  10. DRUG USAGE AND DISPOSAL: OVERVIEW OF ENVIRONMENTAL STEWARDSHIP AND POLLUTION PREVENTION (WITH AN EMPHASIS ON ACTIVITIES IN THE FEDERAL GOVERNMENT)

    Science.gov (United States)

    This article provides the background for understanding the many complex variables that combine to cause pollution of the environment with the active ingredients from pharmaceuticals. It also summarizes the many approaches that could potentially reduce this pollution. Significan...

  11. Evidence-based integrated environmental solutions for secondary lead smelters: Pollution prevention and waste minimization technologies and practices

    Energy Technology Data Exchange (ETDEWEB)

    Genaidy, A.M., E-mail: world_tek_inc@yahoo.com [University of Cincinnati, Cincinnati, Ohio (United States); Sequeira, R. [University of Cincinnati, Cincinnati, Ohio (United States); Tolaymat, T. [U.S. Environmental Protection Agency, Office of Research and Development, Cincinnati, Ohio (United States); Kohler, J. [US Environmental Protection Agency, Office of Solid Waste and Emergency Response, Washington DC (United States); Rinder, M. [WorldTek Inc, Cincinnati (United States)

    2009-05-01

    An evidence-based methodology was adopted in this research to establish strategies to increase lead recovery and recycling via a systematic review and critical appraisal of the published literature. In particular, the research examines pollution prevention and waste minimization practices and technologies that meet the following criteria: (a) reduce/recover/recycle the largest quantities of lead currently being disposed of as waste, (b) technically and economically viable, that is, ready to be diffused and easily transferable, and (c) strong industry interest (i.e., industry would consider implementing projects with higher payback periods). The following specific aims are designed to achieve the study objectives: Aim 1 - To describe the recycling process of recovering refined lead from scrap; Aim 2 - To document pollution prevention and waste management technologies and practices adopted by US stakeholders along the trajectory of LAB and lead product life cycle; Aim 3 - To explore improved practices and technologies which are employed by other organizations with an emphasis on the aforementioned criteria; Aim 4 - To demonstrate the economic and environmental costs and benefits of applying improved technologies and practices to existing US smelting operations; and Aim 5 - To evaluate improved environmental technologies and practices using an algorithm that integrates quantitative and qualitative criteria. The process of identifying relevant articles and reports was documented. The description of evidence was presented for current practices and technologies used by US smelters as well as improved practices and technologies. Options for integrated environmental solutions for secondary smelters were introduced and rank ordered on the basis of costs (i.e., capital investment) and benefits (i.e., production increases, energy and flux savings, and reduction of SO2 and slag). An example was provided to demonstrate the utility of the algorithm by detailing the costs and

  12. Evidence-based integrated environmental solutions for secondary lead smelters: pollution prevention and waste minimization technologies and practices.

    Science.gov (United States)

    Genaidy, A M; Sequeira, R; Tolaymat, T; Kohler, J; Rinder, M

    2009-05-01

    An evidence-based methodology was adopted in this research to establish strategies to increase lead recovery and recycling via a systematic review and critical appraisal of the published literature. In particular, the research examines pollution prevention and waste minimization practices and technologies that meet the following criteria: (a) reduce/recover/recycle the largest quantities of lead currently being disposed of as waste, (b) technically and economically viable, that is, ready to be diffused and easily transferable, and (c) strong industry interest (i.e., industry would consider implementing projects with higher payback periods). The following specific aims are designed to achieve the study objectives: Aim 1 - To describe the recycling process of recovering refined lead from scrap; Aim 2 - To document pollution prevention and waste management technologies and practices adopted by US stakeholders along the trajectory of LAB and lead product life cycle; Aim 3 - To explore improved practices and technologies which are employed by other organizations with an emphasis on the aforementioned criteria; Aim 4 - To demonstrate the economic and environmental costs and benefits of applying improved technologies and practices to existing US smelting operations; and Aim 5 - To evaluate improved environmental technologies and practices using an algorithm that integrates quantitative and qualitative criteria. The process of identifying relevant articles and reports was documented. The description of evidence was presented for current practices and technologies used by US smelters as well as improved practices and technologies. Options for integrated environmental solutions for secondary smelters were introduced and rank ordered on the basis of costs (i.e., capital investment) and benefits (i.e., production increases, energy and flux savings, and reduction of SO(2) and slag). An example was provided to demonstrate the utility of the algorithm by detailing the costs and

  13. Incidence and preventability of adverse events requiring intensive care admission: a systematic review.

    Science.gov (United States)

    Vlayen, Annemie; Verelst, Sandra; Bekkering, Geertruida E; Schrooten, Ward; Hellings, Johan; Claes, Neree

    2012-04-01

    Adverse events are unintended patient injuries or complications that arise from health care management resulting in death, disability or prolonged hospital stay. Adverse events that require critical care are a considerable financial burden to the health care system, but also their global impact on patients and society is probably underestimated. The objectives of this systematic review were to synthesize the best available evidence regarding the estimates of the incidence and preventability of adverse events that necessitate intensive care admission, to determine the type and consequences [mortality, length of intensive care unit (ICU) stay and costs] of these adverse events. MEDLINE (from 1966 to present), EMBASE (from 1974 to present) and CENTRAL (version 1-2010) were searched for studies reporting on unplanned admissions on ICUs. Several other sources were searched for additional studies. Only quantitative studies that used chart review for the detection of adverse events requiring intensive care admission were considered for eligibility. For the purposes of this systematic review, ICUs were defined as specialized hospital facilities which provide continuous monitoring and intensive care for acutely ill patients. Studies that were published in the English, Dutch, German, French or Spanish language were eligible for inclusion. Two reviewers independently extracted data and assessed the methodological quality of the included studies. A total of 27 studies were reviewed. Meta-analysis of the data was not appropriate because of methodological and statistical heterogeneity between studies; therefore, results are presented in a descriptive way. The percentage of surgical and medical adverse events that required ICU admission ranged from 1.1% to 37.2%. ICU readmissions varied from 0% to 18.3%. Preventability of the adverse events varied from 17% to 76.5%. Preventable adverse events are further synthesized by type of event. Consequences of the adverse events included a

  14. 24 CFR 1000.40 - Do lead-based paint poisoning prevention requirements apply to affordable housing activities...

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Do lead-based paint poisoning prevention requirements apply to affordable housing activities under NAHASDA? 1000.40 Section 1000.40 Housing... AMERICAN HOUSING ACTIVITIES General § 1000.40 Do lead-based paint poisoning prevention requirements apply...

  15. Evaluation of charred porous polymers as a method of storm water pollution prevention for shipyards

    Energy Technology Data Exchange (ETDEWEB)

    Clark, G.E.

    1998-08-01

    Most shipyards have viable Best Management Practices (BMPs) in place to mitigate the transport of heavy metals to surface waters by storm water. Despite aggressive efforts to control storm water, shipyards have come under increased regulatory pressure to further reduce concentrations of heavy metals, such as copper and nickel, in storm water discharges. The tightening of regulatory requirements warrants research into additional BMPs. The objectives of this research project were to: (1) determine the feasibility of placing a replaceable cartridge of adsorbent material within a storm water collection system; and (2) evaluate two commercially available charred porous polymer adsorbents for the removal of heavy metals from storm water. The results indicated that there are commercially available storm water treatment components which could be adapted to house a cartridge of porous adsorbent material.

  16. 77 FR 34315 - National Pollutant Discharge Elimination System-Proposed Regulations to Establish Requirements...

    Science.gov (United States)

    2012-06-11

    ... on information collection provisions to the Office of Information and Regulatory Affairs, Office of... holidays. The telephone number for the Public Reading Room is 202-566-1744, and the telephone number for... requiring this. EPA's proposed IM limits are expressed as a monthly average and an annual average. A...

  17. 75 FR 30395 - Stakeholder Input; National Pollutant Discharge Elimination System (NPDES) Permit Requirements...

    Science.gov (United States)

    2010-06-01

    ... peak flow as part of an SSO rulemaking to allow for a holistic and integrated approach to reducing SSOs... Charles Glass, EPA Headquarters, Office of Water, Office of Wastewater Management at tel.: 202-564-0418 or... principles with the following suggested NPDES permit requirements: (1) Capacity, management, operation and...

  18. Wastewater treatment technologies to satisfy 1990's energy conservation/pollution prevention goals

    International Nuclear Information System (INIS)

    Keith, L.W.; Beers, A.R.

    1993-01-01

    Anheuser-Busch, like most other companies, relied through the mid-1970's on end-of-pipe, energy-intensive aerobic treatment systems for its wastewater. Little if any attention was placed on source reduction. There are several factors that help explain why industry had adopted this approach. Energy was relatively cheap, sludge disposal was not a major problem and many municipalities provided wastewater treatment capacity to industry as an inducement for industry to locate there. The saying for A-B was open-quotes We know how to make beer - municipalities know how to treat our wastewater - let's not mix the two.close quotes The 1973 oil embargo and the resulting mid-1970's energy crisis changed Anheuser-Busch's wastewater treatment philosophy. The days of cheap energy and wastewater treatment were gone. This was only exaggerated by the more stringent treatment requirements resulting from the passage of PL92-500 (Clean Water Act). Increasing sludge disposal problems with associated increased disposal costs also occurred. From the mid-1970's to the mid-1980's Anheuser-Busch performed significant developmental work on land application of wastewater. This technology, which requires only about 10% of the energy of aerobic activated sludge treatment systems and produces no sludge for disposal, was installed at six Anheuser-Busch locations. During this time period considerable improvement was made in the area of waste load reduction. However, the main driving force was economics; that is, it was done if cheaper than wastewater treatment. Anheuser-Busch still had a basic end-of-pipe treatment philosophy

  19. Transferring the Integrated Pollution Prevention and Control (IPPC Approach and Best Available Techniques (BAT Concepts to Egypt, Tunisia and Morocco

    Directory of Open Access Journals (Sweden)

    Víctor Vázquez Calvo

    2013-07-01

    Full Text Available The principles introduced by the Directive Concerning Integrated Pollution Prevention and Control (IPPC (currently known as the Industrial Emissions Directive (2010/75/EU are innovative and have raised interests in the framework of the literature debate on environmental regulation. Many articles describe and analyze the application of the Directive in European countries, but only a few articles focus on how the interest for the Directive’s principles, including the integrated approach, have reached countries outside the European Union. This paper aims to contribute to this topic, describing the experience of the authors in carrying out an EU-funded project on transferring the IPPC approach and Best Available Techniques (BAT concepts to three Arab countries, i.e., Egypt, Morocco and Tunisia. The paper presents the experience referring to two sectors falling within the scope of the IPPC Directive: the textile and dairy sector. The objectives, methodologies, activities and experiences are described and can be used and valorized to integrate the IPPC approach and BAT concepts in the current environmental legislation of the three countries.

  20. The injection equipment of future high-speed DI diesel engines with respect to power and pollution requirements

    Energy Technology Data Exchange (ETDEWEB)

    Dolenc, A. (Monobloc Dieselmotoren GmbH, Vienna (AT))

    1990-01-01

    The development of high specific output DI diesel engines started at the low-speed end some 50 years ago primarily for marine and traction applications. Movement towards the high-speed end has been slow but steady with the majority of truck engines being very conservatively rated. There has been recent major effort on the automotive car and light commercial vehicle diesel application leading to lightweight DI diesel engines with an engine speed of 4000-5000 r/min and a rated power of 50 kW/litre displacement. These are expected to be on the market in a short period of time. The key point of this development has been the injection equipment including combustion control. In this area the use of modulated injection has the possibility of solving power and pollution requirements. (author).

  1. Review of offshore oil-spill prevention and remediation requirements and practices in Newfoundland and Labrador

    International Nuclear Information System (INIS)

    Turner, M.; Skinner, J.; Roberts, J.; Harvey, R.; Ross, S.L

    2010-12-01

    The report studies aspects of the Province of Newfoundland and Labrador's requirements for oil-spill prevention, response and remediation. The Canada-Newfoundland and Labrador Offshore Petroleum Board (C-NLOPB) is responsible and accountable for the industry's meeting its commitments in terms of monitoring, auditing and management. Comparisons with requirements in different regions, such as Norway, the United Kingdom, Australia and the United States demonstrate C-NLOPB practices are sound and comprehensive and meet international standards. Even though the standard established by the Board is high, further improvement is nevertheless needed and the report makes detailed recommendations for bringing this about. The four-tiered industry response system of safe practices:, safety culture, designs, standards and training and competency assurance programs is also augmented and enhanced by the C-NLOPB approval process.

  2. Pollution from pipelines

    International Nuclear Information System (INIS)

    1991-01-01

    During the 1980s, over 3,900 spills from land-based pipelines released nearly 20 million gallons of oil into U.S. waters-almost twice as much as was released by the March 1989 Exxon Valdez oil spill. Although the Department of Transportation is responsible for preventing water pollution from petroleum pipelines, GAO found that it has not established a program to prevent such pollution. DOT has instead delegated this responsibility to the Coast Guard, which has a program to stop water pollution from ships, but not from pipelines. This paper reports that, in the absence of any federal program to prevent water pollution from pipelines, both the Coast Guard and the Environmental Protection Agency have taken steps to plan for and respond to oil spills, including those from pipelines, as required by the Clean Water Act. The Coast Guard cannot, however, adequately plan for or ensure a timely response to pipeline spills because it generally is unaware of specific locations and operators of pipelines

  3. Increasing fine particulate air pollution in China and the potential use of exposure and biomarker data in disease prevention.

    Science.gov (United States)

    Wendt, Chris H; Ramachandran, Gurumurthy; Lo, Charles; Hertz, Marshall; Mandel, Jeffrey H

    2015-03-16

    Increased industrialization and urbanization have led to marked increases in air pollutants in China over the last decade. Pollutant levels in the north and eastern regions are often four times higher than current daily levels in the United States. Recent reports indicate a higher incidence of lung cancer and mortality in men and urban dwellers, but the contribution of air pollution to these findings remains unknown. Future studies that define individual exposures, combined with biomarkers linked to disease, will be essential to the understanding of risk posed by air pollution in China.

  4. Measuring Pollution Prevention

    Science.gov (United States)

    Measuring results is an essential component of any successful P2 program and is one way to determine the success of a technical assistance or training effort. This page introduces the concept of P2 measurement.

  5. Manpower Requirements for Pollution Control and Water Resources in Indiana and a Related Pollution Control Technology Curriculum. Manpower Report 69-1.

    Science.gov (United States)

    Purdue Univ., Lafayette, IN. Office of Manpower Studies.

    The purpose of this study was to identify the trained manpower needed to cope with Indiana's mounting problems in air and water pollution control, liquid and solid waste disposal, and water supply and resources. This report contains data concerning the present employment, current job opportunities, and projected manpower needs for related…

  6. Testing and analysis to determine the shell thickness required to prevent puncture

    International Nuclear Information System (INIS)

    Ammerman, D.J.; Radloff, H.D.; Eifert, E.J.

    1998-05-01

    Type B radioactive material packages are required to withstand a hypothetical puncture accident of a free fall from a height of one meter onto a 15 cm diameter mild steel puncture probe. For many packages it is desirable to have this accident event not result in puncture or tearing of the outer shell of the package. The wall thickness necessary to prevent this has historically been determined by test or the use of empirical relations. This technique generally results in overly conservative designs, but the degree of conservatism is uncertain. The use of modem finite element codes to determine package response to puncture accidents can result in designs that are both safe and economical. The work reported in this paper is aimed at developing a method to analytically determine the wall thickness required to prevent puncture. For designers and regulators to have confidence in this analytical method, however, it must be benchmarked against test results. A series of tests has been conducted with differing shell thicknesses, shell materials of mild steel and stainless steel, and shell backing materials of lead, foam, and air. The results of these tests have been compared with pre-test analytical predictions of the response obtained from the nonlinear transient dynamic finite element program PRONTO-2D. From this comparison it can be seen that the finite element method can accurately predict the response of packages to puncture accidents. This implies that an analytical technique based on the finite element method can be used to design packages having known response and margin of safety against tearing of the outer shell. In addition, the analytical technique can accurately predict the deformed shape of the package following the test. This may be important for subsequent calculations, such as external dose and heat input during a thermal event

  7. INVESTIGATION OF THE NUTRITIONAL REQUIREMENTS AND CORRESPONDING CODING GENES OF HYDROCARBON-DEGRADING BACTERIAL STRAINS FOR THE PRODUCTION OF BIOMASS USEFUL IN BIOREMEDIATION OF PETROLEUM POLLUTION

    OpenAIRE

    Attar, Al Zahraa Omar

    2015-01-01

    Petroleum-derived contamination events constitute one of the most dominant sources of environmental deterioration in the industrialized countries. Hydrocarbon compounds are recognized as toxic and carcinogenic organic pollutants and environmentally persistent. Bioremediation efforts aim to confine, restrain and mitigate the magnitude of contamination, in order to prevent additional decline of the environment and to protect all life forms from exposure to hazardous materials. The aim of this p...

  8. Nitrogen pollution control in the European Union: challenging the requirements of the Nitrates Directive with the Agenda 2000 proposals

    NARCIS (Netherlands)

    Brouwer, F.M.; Hellegers, P.J.G.J.; Hoogeveen, M.W.; Leusink, H.H.

    2001-01-01

    Nitrogen pollution resulting from agricultural activities is a major threat to the quality of the European environment. This paper aims to qualify the importance of nutritional management in reducing nitrogen pollution from intensive livestock production and to quantify its potential results where

  9. First Order Estimates of Energy Requirements for Pollution Control. Interagency Energy-Environment Research and Development Program Report.

    Science.gov (United States)

    Barker, James L.; And Others

    This U.S. Environmental Protection Agency report presents estimates of the energy demand attributable to environmental control of pollution from stationary point sources. This class of pollution source includes powerplants, factories, refineries, municipal waste water treatment plants, etc., but excludes mobile sources such as trucks, and…

  10. Measures to prevent oil pollution in oceans, and their preservation effect; Kaiyo no abura osen no boshi taisaku to hozen koka ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Shinoda, T; Fukuchi, N; Fujii, H [Kyushu University, Fukuoka (Japan). Faculty of Engineering; Sato, S

    1996-04-10

    It was intended to confirm, based on various problems surrounding oil flow-out accidents, that oil fences whose use is first considered when an oil flow-out accident occurs cause oil leakage due to oil pass-through phenomenon as the largest defect in performance of oil fences. Therefore, oil fence performance was analyzed by using a simulation. Furthermore, several types of diffusion prevention and avoidance measures, and combinations thereof were evaluated by using multi-criteria analysis. It was also elucidated how recognitions on the importance of methods to prevent oil pollution differ depending on standpoints. Difference in oil flow-out prevention performance of oil fences due to variation in tidal currents was made clear by combining a diffusion simulation using the finite element method with the prevention performance of oil fences relative to the tidal currents. In areas with no good hydrographic conditions where pollution spreads rapidly, it is necessary to suppress oil diffusion by extending oil fences double or triple, and using gelling agents. 4 refs., 8 figs.

  11. Electric Arc Furnace as a Source of Emission of Polychlorinated Dibenzo-p-Dioxins and Polychlorinated Dibenzofurans in Perspective of the Council Directive 96/61 EC Concerning Integrated Pollution Prevention and Control

    Directory of Open Access Journals (Sweden)

    Sofilić, T.

    2008-01-01

    Full Text Available As the accumulation of PCDDs/Fs in the natural environment poses a great threat, and the pollution of the environment with these highly toxic compounds from various emitters needs to be prevented, many countries have conducted an inventory of industrial sources and their emissions in order to obtain better insight into the share of particular sources in the total emission of PCDDs/Fs and to develop strategies to reduce these emissions.Metallurgical processes like sintering of iron ore, production of steel and non-ferrous and light metals from scrap material belong to a group of stationary PCDDs/Fs emitters and their share in the total PCDDs/Fs emission into the environment is very significant. The relative significance of particular metallurgical processes varies from country to country, depending on the nature of a particular process, installed capacities and annual output levels.As the modern approach to observing the environment includes preventive measures, as opposed to corrective post-event measures that were common practice in the past, the owners/operators of metallurgical processes are developing and introducing pollution monitoring and surveillance systems, based on which they take appropriate measures.One of the frequently applied measures is to build and implement the ISO 14001 environmental management system that very efficiently runs production processes along with maintenance of environmental protection on a daily basis. Since the adoption of the ISO 14001 environmental management system is a voluntary decision to be made by each organization, in 1996 the European Union adopted, for the purpose of environmental protection and pollution prevention, the Directive 96/61 EC or IPPC Directive on Integrated Pollution Prevention and Control (IPPC requiring from industrial installations, depending on their type and output level, to obtain environmental permits to run production processes using best available techniques, thus maintaining

  12. Using local biodiversity to prevent pollution transfers to environmental components of a Mediterranean semi-arid ecosystem

    Science.gov (United States)

    Heckenroth, Alma; Rabier, Jacques; Laffont-Schwob, Isabelle

    2014-05-01

    In arid and semi-arid Mediterranean coastal areas, metals and metalloids (MM) pollution coming from unreclaimed brownfields has increased the negative environmental stresses leading to ecosystems degradations as soil erosion and losses of organic matter and biodiversity. On these sites, maintaining or restoring a local vegetation cover is considered as a key step to stop the degradation cycle. Furthermore, in a context of high pollution occurring in natural areas, phytoremediation is considered as an attractive alternative to conventional soil remediation techniques, the first reducing pollution transfers, improving the soil quality. In protected or natural areas, it is also important to perceive then design phytoremediation as a way to assist ecosystems recovery, using the restoration ecology concepts. However, only few works in the literature deal with the potential use of native Mediterranean plant species for phytoremediation. On the South-East coast of Marseille (France), the activity of the former smelting factory of l'Escalette, ceased since 1925. However, its brownfield is still a source of pollution by trace metals and metalloids for abiotic and biotic components of the surrounding massif. This massif hosts a rich biodiversity with rare and protected plant species despite the metallic pollution and this area has been included in the recently created first peri-urban French National Park of Calanques. In this context, an integrated research project is being conducted with local actors and stakeholders, from the selection of native plant species, assessment and optimization of phytostabilization capacities of selected species, to the development of ecological engineering techniques well adapted to local constraints and phytostabilization field trials. The first part of this study has been conducted on two areas, corresponding to different pollution pattern, plant communities and environmental drivers: a halophytic area, characterized by typical coastal

  13. The impact of the "Air Pollution Prevention and Control Action Plan" on PM2.5 concentrations in Jing-Jin-Ji region during 2012-2020.

    Science.gov (United States)

    Cai, Siyi; Wang, Yangjun; Zhao, Bin; Wang, Shuxiao; Chang, Xing; Hao, Jiming

    2017-02-15

    In order to cope with heavy haze pollution in China, the Air Pollution Prevention and Control Action Plan including phased goals of the fine particulate matter (PM 2.5 ) was issued in 2013. In this study, China's emission inventories in the baseline 2012 and the future scenarios of 2017 and 2020 have been developed based on this Action Plan. Beijing-Tianjin-Hebei (Jing-Jin-Ji) region, one of the most polluted regions in China, was taken as a case to assess the impact of phased emission control measures on PM 2.5 concentration reduction using WRF-CMAQ model system. With the implementation of the Action Plan, the emissions of sulfur dioxide (SO 2 ), nitrogen oxides (NO X ) , PM 2.5 , non-methane volatile organic compound (NMVOC), and ammonia (NH 3 ) in 2017 will decrease by36%, 31%, 30%,12%, and -10% from the 2012 levels in Jing-Jin-Ji, respectively. In 2020, the emissions of SO 2 , NO X, PM 2.5 , NMVOC, and NH 3 will decrease by 40%, 44%, 40%, 22%, and -3% from the 2012 levels in Jing-Jin-Ji, respectively. Consequently, the ambient annual PM 2.5 concentration under the scenarios of 2017 and 2020 will be 28.3% and 37.8% lower than those in 2012, respectively. The Action Plan provided an effective approach to alleviate PM 2.5 pollution level in Jing-Jin-Ji region. However, emission control of NMVOC and NH 3 should be paid more attention and be strengthened in future. Meanwhile, emission control of NO x , SO 2 , NH 3 and NMVOC synergistically are highly needed in the future because multiple pollutants impact on PM 2.5 and O 3 concentrations nonlinearly. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. DEVELOPING A CAPE-OPEN COMPLIANT METAL FINISHING FACILITY POLLUTION PREVENTION TOOL (CO-MFFP2T)

    Science.gov (United States)

    The USEPA is developing a Computer Aided Process Engineering (CAPE) software tool for the metal finishing industry that helps users design efficient metal finishing processes that are less polluting to the environment. Metal finishing process lines can be simulated and evaluated...

  15. ENVIRONMENTAL POLLUTION

    OpenAIRE

    Reyna Ramos, julio

    2014-01-01

    The article shows the complexity of the problem of environmental pollution and what can be the possible solutions to the problem. Also, how the Industrial Engineering can contribute to the prevention and control of pollution. El artículo muestra la complejidad del problema de la contaminación ambiental y cuáles pueden ser las propuestas de solución al problema. Así mismo, cómo la Ingeniería Industrial puede contribuir a la prevención y control de la contaminación.

  16. Prevention

    DEFF Research Database (Denmark)

    Halken, S; Høst, A

    2001-01-01

    , breastfeeding should be encouraged for 4-6 months. In high-risk infants a documented extensively hydrolysed formula is recommended if exclusive breastfeeding is not possible for the first 4 months of life. There is no evidence for preventive dietary intervention neither during pregnancy nor lactation...... populations. These theories remain to be documented in proper, controlled and prospective studies. Breastfeeding and the late introduction of solid foods (>4 months) is associated with a reduced risk of food allergy, atopic dermatitis, and recurrent wheezing and asthma in early childhood. In all infants....... Preventive dietary restrictions after the age of 4-6 months are not scientifically documented....

  17. 40 CFR 52.2140 - Interstate pollutant transport provisions; What are the FIP requirements for decreases in...

    Science.gov (United States)

    2010-07-01

    ... years. (b)(1) The owner and operator of each NOX source located within the State of South Carolina and...) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) South Carolina § 52.2140 Interstate pollutant...) The owner and operator of each source located within the State of South Carolina and for which...

  18. 40 CFR 52.1784 - Interstate pollutant transport provisions; What are the FIP requirements for decreases in...

    Science.gov (United States)

    2010-07-01

    ... years. (b)(1) The owner and operator of each NOX source located within the State of North Carolina and...) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS (CONTINUED) North Carolina § 52.1784 Interstate pollutant...) The owner and operator of each source located within the State of North Carolina and for which...

  19. Air Pollution Training Programs.

    Science.gov (United States)

    Public Health Service (DHEW), Rockville, MD.

    This catalog lists the universities, both supported and not supported by the Division of Air Pollution, which offer graduate programs in the field of air pollution. The catalog briefly describes the programs and their entrance requirements, the requirements, qualifications and terms of special fellowships offered by the Division of Air Pollution.…

  20. Household ventilation may reduce effects of indoor air pollutants for prevention of lung cancer: a case-control study in a Chinese population.

    Directory of Open Access Journals (Sweden)

    Zi-Yi Jin

    Full Text Available Although the International Agency for Research on Cancer (IARC has classified various indoor air pollutants as carcinogenic to humans, few studies evaluated the role of household ventilation in reducing the impact of indoor air pollutants on lung cancer risk.To explore the association between household ventilation and lung cancer.A population-based case-control study was conducted in a Chinese population from 2003 to 2010. Epidemiologic and household ventilation data were collected using a standardized questionnaire. Unconditional logistic regression was employed to estimate adjusted odds ratios (ORadj and their 95% confidence intervals (CI.Among 1,424 lung cancer cases and 4,543 healthy controls, inverse associations were observed for good ventilation in the kitchen (ORadj = 0.86, 95% CI: 0.75, 0.98, bedroom (ORadj = 0.90, 95% CI: 0.79, 1.03, and both kitchen and bedroom (ORadj = 0.87, 95% CI: 0.75, 1.00. Stratified analyses showed lung cancer inversely associated with good ventilation among active smokers (ORadj = 0.85, 95% CI: 0.72, 1.00, secondhand smokers at home (ORadj = 0.77, 95% CI: 0.63, 0.94, and those exposed to high-temperature cooking oil fumes (ORadj = 0.82, 95% CI: 0.68, 0.99. Additive interactions were found between household ventilation and secondhand smoke at home as well as number of household pollutant sources.A protective association was observed between good ventilation of households and lung cancer, most likely through the reduction of exposure to indoor air pollutants, indicating ventilation may serve as one of the preventive measures for lung cancer, in addition to tobacco cessation.

  1. Household Ventilation May Reduce Effects of Indoor Air Pollutants for Prevention of Lung Cancer: A Case-Control Study in a Chinese Population

    Science.gov (United States)

    Han, Ren-Qiang; Zhang, Xiao-Feng; Wang, Xu-Shan; Liu, Ai-Ming; Zhou, Jin-Yi; Lu, Qing-Yi; Kim, Claire H.; Mu, Lina; Zhang, Zuo-Feng; Zhao, Jin-Kou

    2014-01-01

    Background Although the International Agency for Research on Cancer (IARC) has classified various indoor air pollutants as carcinogenic to humans, few studies evaluated the role of household ventilation in reducing the impact of indoor air pollutants on lung cancer risk. Objectives To explore the association between household ventilation and lung cancer. Methods A population-based case-control study was conducted in a Chinese population from 2003 to 2010. Epidemiologic and household ventilation data were collected using a standardized questionnaire. Unconditional logistic regression was employed to estimate adjusted odds ratios (ORadj) and their 95% confidence intervals (CI). Results Among 1,424 lung cancer cases and 4,543 healthy controls, inverse associations were observed for good ventilation in the kitchen (ORadj = 0.86, 95% CI: 0.75, 0.98), bedroom (ORadj = 0.90, 95% CI: 0.79, 1.03), and both kitchen and bedroom (ORadj = 0.87, 95% CI: 0.75, 1.00). Stratified analyses showed lung cancer inversely associated with good ventilation among active smokers (ORadj = 0.85, 95% CI: 0.72, 1.00), secondhand smokers at home (ORadj = 0.77, 95% CI: 0.63, 0.94), and those exposed to high-temperature cooking oil fumes (ORadj = 0.82, 95% CI: 0.68, 0.99). Additive interactions were found between household ventilation and secondhand smoke at home as well as number of household pollutant sources. Conclusions A protective association was observed between good ventilation of households and lung cancer, most likely through the reduction of exposure to indoor air pollutants, indicating ventilation may serve as one of the preventive measures for lung cancer, in addition to tobacco cessation. PMID:25019554

  2. Household ventilation may reduce effects of indoor air pollutants for prevention of lung cancer: a case-control study in a Chinese population.

    Science.gov (United States)

    Jin, Zi-Yi; Wu, Ming; Han, Ren-Qiang; Zhang, Xiao-Feng; Wang, Xu-Shan; Liu, Ai-Ming; Zhou, Jin-Yi; Lu, Qing-Yi; Kim, Claire H; Mu, Lina; Zhang, Zuo-Feng; Zhao, Jin-Kou

    2014-01-01

    Although the International Agency for Research on Cancer (IARC) has classified various indoor air pollutants as carcinogenic to humans, few studies evaluated the role of household ventilation in reducing the impact of indoor air pollutants on lung cancer risk. To explore the association between household ventilation and lung cancer. A population-based case-control study was conducted in a Chinese population from 2003 to 2010. Epidemiologic and household ventilation data were collected using a standardized questionnaire. Unconditional logistic regression was employed to estimate adjusted odds ratios (ORadj) and their 95% confidence intervals (CI). Among 1,424 lung cancer cases and 4,543 healthy controls, inverse associations were observed for good ventilation in the kitchen (ORadj = 0.86, 95% CI: 0.75, 0.98), bedroom (ORadj = 0.90, 95% CI: 0.79, 1.03), and both kitchen and bedroom (ORadj = 0.87, 95% CI: 0.75, 1.00). Stratified analyses showed lung cancer inversely associated with good ventilation among active smokers (ORadj = 0.85, 95% CI: 0.72, 1.00), secondhand smokers at home (ORadj = 0.77, 95% CI: 0.63, 0.94), and those exposed to high-temperature cooking oil fumes (ORadj = 0.82, 95% CI: 0.68, 0.99). Additive interactions were found between household ventilation and secondhand smoke at home as well as number of household pollutant sources. A protective association was observed between good ventilation of households and lung cancer, most likely through the reduction of exposure to indoor air pollutants, indicating ventilation may serve as one of the preventive measures for lung cancer, in addition to tobacco cessation.

  3. 75 FR 41787 - Requirement for Group Health Plans and Health Insurance Issuers To Provide Coverage of Preventive...

    Science.gov (United States)

    2010-07-19

    ... Requirement for Group Health Plans and Health Insurance Issuers To Provide Coverage of Preventive Services... Insurance Oversight of the U.S. Department of Health and Human Services are issuing substantially similar interim final regulations with respect to group health plans and health insurance coverage offered in...

  4. The requirements and challenges in preventing of road traffic injury in Iran. A qualitative study

    Directory of Open Access Journals (Sweden)

    Laflamme Lucie

    2009-12-01

    Full Text Available Abstract Background Road traffic injuries (RTIs are a major public health problem, especially in low- and middle-income countries. Among middle-income countries, Iran has one of the highest mortality rates from RTIs. Action is critical to combat this major public health problem. Stakeholders involved in RTI control are of key importance and their perceptions of barriers and facilitators are a vital source of knowledge. The aim of this study was to explore barriers to the prevention of RTIs and provide appropriate suggestions for prevention, based on the perceptions of stakeholders, victims and road-users as regards RTIs. Methods Thirty-eight semi-structured interviews were conducted with informants in the field of RTI prevention including: police officers; public health professionals; experts from the road administrators; representatives from the General Governor, the car industry, firefighters; experts from Emergency Medical Service and the Red Crescent; and some motorcyclists and car drivers as well as victims of RTIs. A qualitative approach using grounded theory method was employed to analyze the material gathered. Results The core variable was identified as "The lack of a system approach to road-user safety". The following barriers in relation to RTI prevention were identified as: human factors; transportation system; and organizational coordination. Suggestions for improvement included education (for the general public and targeted group training, more effective legislation, more rigorous law enforcement, improved engineering in road infrastructure, and an integrated organization to supervise and coordinate preventive activities. Conclusion The major barriers identified in this study were human factors and efforts to change human behaviour were suggested by means of public education campaigns and stricter law enforcement. However, the lack of a system approach to RTI prevention was also an important concern. There is an urgent need for both

  5. The requirements and challenges in preventing of road traffic injury in Iran. A qualitative study.

    Science.gov (United States)

    Khorasani-Zavareh, Davoud; Mohammadi, Reza; Khankeh, Hamid Reza; Laflamme, Lucie; Bikmoradi, Ali; Haglund, Bo J A

    2009-12-23

    Road traffic injuries (RTIs) are a major public health problem, especially in low- and middle-income countries. Among middle-income countries, Iran has one of the highest mortality rates from RTIs. Action is critical to combat this major public health problem. Stakeholders involved in RTI control are of key importance and their perceptions of barriers and facilitators are a vital source of knowledge. The aim of this study was to explore barriers to the prevention of RTIs and provide appropriate suggestions for prevention, based on the perceptions of stakeholders, victims and road-users as regards RTIs. Thirty-eight semi-structured interviews were conducted with informants in the field of RTI prevention including: police officers; public health professionals; experts from the road administrators; representatives from the General Governor, the car industry, firefighters; experts from Emergency Medical Service and the Red Crescent; and some motorcyclists and car drivers as well as victims of RTIs. A qualitative approach using grounded theory method was employed to analyze the material gathered. The core variable was identified as "The lack of a system approach to road-user safety". The following barriers in relation to RTI prevention were identified as: human factors; transportation system; and organizational coordination. Suggestions for improvement included education (for the general public and targeted group training), more effective legislation, more rigorous law enforcement, improved engineering in road infrastructure, and an integrated organization to supervise and coordinate preventive activities. The major barriers identified in this study were human factors and efforts to change human behaviour were suggested by means of public education campaigns and stricter law enforcement. However, the lack of a system approach to RTI prevention was also an important concern. There is an urgent need for both an integrated system to coordinate RTI activities and prevention

  6. POLLUTION PREVENTION OPPORTUNITY ASSESSMENT - U.S. POSTAL INSPECTION SERVICE FORENSIC & TECHNICAL SERVICES DIVISION - NATIONAL FORENSIC LABORATORY, DULLES, VIRGINIA

    Science.gov (United States)

    The United States Postal Service (USPS) in cooperation with EPA's National Risk Management Research Laboratory (NRMRL) is engaged in an effort to integrate waste prevention and recycling activities into the waste management programs at Postal facilities. This report describes the...

  7. Water pollution by non-radioactive materials

    International Nuclear Information System (INIS)

    Dickenbrok, G.

    1974-01-01

    Water is in constant circulation from the ocean to the earth's atmosphere and back to the ocean. In the course of this cycle, the composition of the water is altered by natural and human influences. Depending on the prevailing conditions, the water may contain solute gases, undissolved substances, inorganic salts, organic compounds, and microorganisms of varying types and concentrations. Many of these substances are known to pollute the water and thus to threaten its various uses. Emitting sources of water pollutants are: waste waters, seepings from open dumpings, mineral fertilizers and biocides washed out from agricultural areas, water pollutants emitted during storage and transport, air pollutants, and erosions from roads. The thermal load is an additional factor. Technical and legal steps are necessary in order to prevent water pollution and to maintain the quality of water required for its various uses. These measures are treated in detail. (orig./AK) [de

  8. Governing change: land-use change and the prevention of nonpoint source pollution in the north coastal basin of California.

    Science.gov (United States)

    Short, Anne G

    2013-01-01

    Many rural areas in the United States and throughout much of the postindustrial world are undergoing significant ecological, socioeconomic, and political transformations. The migration of urban and suburban dwellers into rural areas has led to the subdivision of large tracts of land into smaller parcels, which can complicate efforts to govern human-environmental problems. Non-point source (NPS) pollution from private rural lands is a particularly pressing human-environmental challenge that may be aggravated by changing land tenure. In this article, I report on a study of the governance and management of sediment (a common NPS pollutant) in the North Coastal basin of California, a region undergoing a transition from traditional extractive and agricultural land uses to rural residential and other alternative land uses. I focus on the differences in the governance and management across private timber, ranch, residential, vacation, and other lands in the region. I find that (1) the stringency and strength of sediment regulations differ by land use, (2) nonregulatory programs tend to target working landscapes, and (3) rural residential landowners have less knowledge of sediment control and report using fewer sediment-control techniques than landowners using their land for timber production or ranching. I conclude with an exploration of the consequences of these differences on an evolving rural landscape.

  9. Particle Pollution

    Science.gov (United States)

    ... Your Health Particle Pollution Public Health Issues Particle Pollution Recommend on Facebook Tweet Share Compartir Particle pollution — ... see them in the air. Where does particle pollution come from? Particle pollution can come from two ...

  10. Some social and health policy requirements for the prevention of AIDS.

    Science.gov (United States)

    Rosenbrock, R

    1987-01-01

    Given the present circumstances and considering the foreseeable development of medical knowledge, the primary prevention of AIDS is the sole field of health policy in which the spreading of the disease and the subsequent number of victims can be reduced. AIDS prevention as a time-stable behaviour control in potentially risky situations is therefore primarily a task which has to be tackled in a social scientific manner. It has to be handled on the basis of available medical knowledge of infectious disease situations. Viewed realistically, the prospective goal is not the elimination of the disease, but the greatest possible reduction and minimization of risk, both individually and epidemiologically. Proceeding from realistic estimates of the desired and undesired effects of health policy measures, this principle is being applied through the strategy (achieved through informational campaigns) of encouraging the use of condoms when having sexual intercourse in non-monogamous relationships and of informing intravenous drug abusers of the need to employ sterile hypodermic needles. Elements of this preventive strategy are discussed under four central questions: What should/must be learn? Who should/must learn? What objective and subjective factors facilitate or hinder this learning? How can this learning process most optimally be organized? The efficiency-reducing interference of other kinds of strategies (e.g. orientation toward zero risk concepts, repression, and mass screening for HIV-anti-bodies) is thereby worked out.

  11. The use of quilting suture in abdominoplasty does not require aspiratory drainage for prevention of seroma.

    Science.gov (United States)

    Arantes, Henrique Lopes; Rosique, Rodrigo Gouvêa; Rosique, Marina Junqueira Ferreira; Mélega, Jose Marcos

    2010-02-01

    The formation of seromas after abdominoplasty is a highly prevalent complication that disturbs both the patient and the surgeon. Aspiratory drainage and adhesion sutures (Baroudi suture) are widely used to prevent this complication. This study evaluated the effectiveness of drains in preventing seromas. This retrospective study investigated women submitted to classic abdominoplasty with adhesion sutures. The women were divided into two groups. Group 1 comprised 28 individuals who received no drains, and group 2 consisted of 32 patients that had drains placed. Clinical evaluation of the patients was performed 7 days, 14 days, 1 month, 2 months, 4 months, and 6 months postoperatively. Statistical analysis was accomplished via Fisher's exact test. Group 1 had one case of seroma (3.5%), clinically detected between the first and second postoperative months, whereas group 2 had one case (3.12%) detected 14 days postoperatively. Fisher's test showed a P value of 1.000 (not statistically significant), for a 95% confidence interval of 0.05 to 14.08 and an odds ratio of 0.8387. Clinical evaluation showed no statistical difference in the incidence of seromas after abdominoplasty with adhesion sutures between the patients who received drains and those who did not. The use of adhesion sutures is an effective measure for preventing seromas with no need for additional surgical measures.

  12. Micronutrient special issue: Coenzyme Q10 requirements for DNA damage prevention

    International Nuclear Information System (INIS)

    Schmelzer, Constance; Döring, Frank

    2012-01-01

    Coenzyme Q 10 (CoQ 10 ) is an essential component for electron transport in the mitochondrial respiratory chain and serves as cofactor in several biological processes. The reduced form of CoQ 10 (ubiquinol, Q 10 H 2 ) is an effective antioxidant in biological membranes. During the last years, particular interest has been grown on molecular effects of CoQ 10 supplementation on mechanisms related to DNA damage prevention. This review describes recent advances in our understanding about the impact of CoQ 10 on genomic stability in cells, animals and humans. With regard to several in vitro and in vivo studies, CoQ 10 provides protective effects on several markers of oxidative DNA damage and genomic stability. In comparison to the number of studies reporting preventive effects of CoQ 10 on oxidative stress biomarkers, CoQ 10 intervention studies in humans with a direct focus on markers of DNA damage are limited. Thus, more well-designed studies in healthy and disease populations with long-term follow up results are needed to substantiate the reported beneficial effects of CoQ 10 on prevention of DNA damage.

  13. Micronutrient special issue: Coenzyme Q{sub 10} requirements for DNA damage prevention

    Energy Technology Data Exchange (ETDEWEB)

    Schmelzer, Constance, E-mail: schmelzer@fbn-dummerstorf.de [Leibniz Institute for Farm Animal Biology (FBN), Nutritional Physiology, Wilhelm-Stahl-Allee 2, 18196 Dummerstorf (Germany); Doering, Frank [University of Kiel, Institute of Human Nutrition and Food Science, Molecular Prevention, Heinrich-Hecht-Platz 10, 24118 Kiel (Germany)

    2012-05-01

    Coenzyme Q{sub 10} (CoQ{sub 10}) is an essential component for electron transport in the mitochondrial respiratory chain and serves as cofactor in several biological processes. The reduced form of CoQ{sub 10} (ubiquinol, Q{sub 10}H{sub 2}) is an effective antioxidant in biological membranes. During the last years, particular interest has been grown on molecular effects of CoQ{sub 10} supplementation on mechanisms related to DNA damage prevention. This review describes recent advances in our understanding about the impact of CoQ{sub 10} on genomic stability in cells, animals and humans. With regard to several in vitro and in vivo studies, CoQ{sub 10} provides protective effects on several markers of oxidative DNA damage and genomic stability. In comparison to the number of studies reporting preventive effects of CoQ{sub 10} on oxidative stress biomarkers, CoQ{sub 10} intervention studies in humans with a direct focus on markers of DNA damage are limited. Thus, more well-designed studies in healthy and disease populations with long-term follow up results are needed to substantiate the reported beneficial effects of CoQ{sub 10} on prevention of DNA damage.

  14. Definition and recommendations for the convention on the prevention of marine pollution by dumping of wastes and other matter, 1972. 1986 ed.

    International Nuclear Information System (INIS)

    1986-01-01

    Under the terms of the Convention on the Prevention of Marine Pollution by Dumping of Wastes and Other Matter, the IAEA is the organization with the responsibility for defining high level radioactive wastes or other high level radioactive matter which is unsuitable for dumping at sea, and for making recommendations to Contracting Parties about the issue of permits for dumping radioactive waste or other radioactive matter. The IAEA established a provisional Definition and Recommendations in 1974 and a revised version in 1978. This Safety Series document contains the second revised Definition and Recommendations, which were established in 1985. The Annexes to the document contain a description of the calculations which form the basis of the quantitative Definition, a comparison between the new and the previous version and a list of all the meetings held during the process of establishing the new document

  15. Groundwater pollution: are we monitoring appropriate parameters?

    CSIR Research Space (South Africa)

    Tredoux, G

    2004-01-01

    Full Text Available Groundwater pollution is a worldwide phenomenon with potentially disastrous consequences. Prevention of pollution is the ideal approach. However, in practice groundwater quality monitoring is the main tool for timely detection of pollutants...

  16. Cancer prevention.

    Science.gov (United States)

    Tubiana, M

    1999-01-01

    Over 70% of human cancers are associated with lifestyle and about half of cancer deaths could be prevented by relatively simple individual actions: no smoking, moderate consumption of alcohol, increased consumption of fruit and vegetables, avoidance of sunbathing, obesity and a too high consumption of saturated lipids. Most of these efforts would also markedly decrease the incidence of cardiovascular and respiratory diseases. However, the concept of prevention is currently neither well accepted nor understood by the medical community and the general public. It is often felt that it restricts freedom, imposes a choice between pleasure and duty, and that passing judgement on lifestyle is a form of intolerance. The case of tobacco illustrates the difficulties encountered by prevention, notably among adolescents. The fight against smoking requires information, a societal approach (ban on advertising, increase in price), and a reduction of the example given by adult smoking (parents, peers, teachers, physicians, TV presenters, movie stars, have a great influence on adolescents), while tobacco cessation programs must be promoted. The various approaches should be integrated into a global program of health prevention, including health education at school from 5 to 12 years of age. The efficacy of each of the global program's components should be evaluated. Misconceptions such as overestimation of the impact of pollution on health should also be corrected. Health is created and experienced by people within the setting of their daily lives, in particular during childhood. Prevention is the responsibility of individual members of the community but also of the community as a whole.

  17. Requirement of RIZ1 for cancer prevention by methyl-balanced diet.

    Science.gov (United States)

    Zhou, Wenyun; Alonso, Sergio; Takai, Daisaku; Lu, Shelly C; Yamamoto, Fumiichiro; Perucho, Manuel; Huang, Shi

    2008-01-01

    The typical Western diet is not balanced in methyl nutrients that regulate the level of the methyl donor S-adenosylmethionine (SAM) and its derivative metabolite S-adenosylhomocysteine (SAH), which in turn may control the activity of certain methyltransferases. Feeding rodents with amino acid defined and methyl-imbalanced diet decreases hepatic SAM and causes liver cancers. RIZ1 (PRDM2 or KMT8) is a tumor suppressor and functions in transcriptional repression by methylating histone H3 lysine 9. Here we show that a methyl-balanced diet conferred additional survival benefits compared to a tumor-inducing methyl-imbalanced diet only in mice with wild type RIZ1 but not in mice deficient in RIZ1. While absence of RIZ1 was tumorigenic in mice fed the balanced diet, its presence did not prevent tumor formation in mice fed the imbalanced diet. Microarray and gene expression analysis showed that, unlike most of its related enzymes, RIZ1 was upregulated by methyl-balanced diet. Methyl-balanced diet did not fully repress oncogenes such as c-Jun in the absence of RIZ1. Higher RIZ1 activity was associated with greater H3 lysine 9 methylation in RIZ1 target genes as shown by chromatin immunoprecipitation analysis. The data identify RIZ1 as a critical target of methyl-balanced diet in cancer prevention. The molecular understanding of dietary carcinogenesis may help people make informed choices on diet, which may greatly reduce the incidence of cancer.

  18. Guidelines for the disposal of dangerous and toxic wastes so as to minimize or prevent environmental and water pollution

    CSIR Research Space (South Africa)

    Rudd, RT

    1978-01-01

    Full Text Available Modern society is producing ever increasing quantities of dangerous and/or toxic wastes, which require safe and effective disposal if they are not to pose a threat to our water supplies or the environment in general....

  19. Requirement of trained first responders and national level preparedness for prevention and response to radiological terrorism

    International Nuclear Information System (INIS)

    Sharma, R.; Pradeepkumar, K.S.

    2010-01-01

    In this paper we have identified the educational needs for response to radiological emergency in India with major thrust on training. The paper has also enumerated the available educational and training infrastructure, the human resources, as well as the important stake holders for development of sustainable education and training programme. The training of emergency response personnel will help in quick decision making, planning and effective response during such emergencies. Medical Emergency management requires planning by hospitals which includes up-gradation of earmarked hospitals, development of mobile hospitals and mobile medical teams supported by communication backups and adequate medical logistics for radiological emergency. Department of Atomic Energy (DAE) is a nodal agency for advising authorities for any nuclear/radiological emergency in public domain. DAE through the various ERCs have already developed technical expertise, systems, software and methodology for quick impact assessment which may be required for the implementation of countermeasures if required following any nuclear disaster/radiological emergency

  20. Development of Human Factor Management Requirements and Human Error Classification for the Prevention of Railway Accident

    International Nuclear Information System (INIS)

    Kwak, Sang Log; Park, Chan Woo; Shin, Seung Ryoung

    2008-08-01

    Railway accident analysis results show that accidents cased by human factors are not decreasing, whereas H/W related accidents are steadily decreasing. For the efficient management of human factors, many expertise on design, conditions, safety culture and staffing are required. But current safety management activities on safety critical works are focused on training, due to the limited resource and information. In order to improve railway safety, human factors management requirements for safety critical worker and human error classification is proposed in this report. For this accident analysis, status of safety measure on human factor, safety management system on safety critical worker, current safety planning is analysis

  1. Requirement of RIZ1 for Cancer Prevention by Methyl-Balanced Diet

    Science.gov (United States)

    Zhou, Wenyun; Alonso, Sergio; Takai, Daisaku; Lu, Shelly C.; Yamamoto, Fumiichiro; Perucho, Manuel; Huang, Shi

    2008-01-01

    Background The typical Western diet is not balanced in methyl nutrients that regulate the level of the methyl donor S-adenosylmethionine (SAM) and its derivative metabolite S-adenosylhomocysteine (SAH), which in turn may control the activity of certain methyltransferases. Feeding rodents with amino acid defined and methyl-imbalanced diet decreases hepatic SAM and causes liver cancers. RIZ1 (PRDM2 or KMT8) is a tumor suppressor and functions in transcriptional repression by methylating histone H3 lysine 9. Methodology/Principal Findings Here we show that a methyl-balanced diet conferred additional survival benefits compared to a tumor-inducing methyl-imbalanced diet only in mice with wild type RIZ1 but not in mice deficient in RIZ1. While absence of RIZ1 was tumorigenic in mice fed the balanced diet, its presence did not prevent tumor formation in mice fed the imbalanced diet. Microarray and gene expression analysis showed that, unlike most of its related enzymes, RIZ1 was upregulated by methyl-balanced diet. Methyl-balanced diet did not fully repress oncogenes such as c-Jun in the absence of RIZ1. Higher RIZ1 activity was associated with greater H3 lysine 9 methylation in RIZ1 target genes as shown by chromatin immunoprecipiation analysis. Conclusions/Significance The data identify RIZ1 as a critical target of methyl-balanced diet in cancer prevention. The molecular understanding of dietary carcinogenesis may help people make informed choices on diet, which may greatly reduce the incidence of cancer. PMID:18852888

  2. Air pollution prevention through urban heat island mitigation: An update on the urban heat island pilot project

    Energy Technology Data Exchange (ETDEWEB)

    Gorsevski, V.; Taha, H.; Quattrochi, D.; Luvall, J.

    1998-07-01

    Urban heat islands increase the demand for cooling energy and accelerate the formation of smog. They are created when natural vegetation is replaced by heat-absorbing surfaces such as building roofs and walls, parking lots, and streets. Through the implementation of measures designed to mitigate the urban heat island, communities can decrease their demand for energy and effectively cool the metropolitan landscape. In addition to the economic benefits, using less energy leads to reductions in emission of CO{sub 2}--a greenhouse gas--as well as ozone (smog) precursors such as NOx and VOCs. Because ozone is created when NOx and VOCs photochemically combine with heat and solar radiation, actions taken to lower ambient air temperature can significantly reduce ozone concentrations in certain areas. Measures to reverse the urban heat island include afforestation and the widespread use of highly reflective surfaces. To demonstrate the potential benefits of implementing these measures, EPA has teamed up with NASA and LBNL to initiate a pilot project with three US cities. As part of the pilot, NASA will use remotely-sensed data to quantify surface temperature, albedo, the thermal response number and NDVI vegetation of each city. This information will be used by scientists at Lawrence Berkeley National Laboratory (LBNL) along with other data as inputs to model various scenarios that will help quantify the potential benefits of urban heat island mitigation measures in terms of reduced energy use and pollution. This paper will briefly describe this pilot project and provide an update on the progress to date.

  3. Hydrocarbons and air pollution

    International Nuclear Information System (INIS)

    Herz, O.

    1992-01-01

    This paper shows the influence of hydrocarbons vapors, emitted by transports or by volatile solvents using, on air pollution. Hydrocarbons are the principal precursors of photochemical pollution. After a brief introduction on atmospheric chemistry and photochemical reactions, the author describes the french prevention program against hydrocarbons emissions. In the last chapter, informations on international or european community programs for photochemical pollution study are given. 5 figs., 10 tabs

  4. Air pollution and respiratory illness

    Energy Technology Data Exchange (ETDEWEB)

    Indra, G. [DIET, Uttamasolapuram, Salem (India)

    2005-07-01

    This presentation provides an overview of air pollution and impacts on public health. It provides a definition of pollution according to the Oxford English dictionary and categorizes the different types of pollution according to air, water, land and noise. It discusses air pollution and its pollutants (gaseous and particulate pollutants) as well as the diameter of the pollutant (dust, smoke, and gas). The paper also illustrates the formation of acid rain and discusses the amount of pollutants in the atmosphere per year. It presents occupational diseases, discusses radio active pollutants, respiratory illnesses as well as pollution prevention and control. The paper concluded that more research is needed to obtain information on ways to reduce the quantity of pollutants being discharged from special processes. 3 refs., 2 figs., 2 tabs.

  5. Power line conductor icing prevention by the Joule effect : parametric analysis and energy requirements

    Energy Technology Data Exchange (ETDEWEB)

    Peter, Z.; Farzaneh, M.; Kiss, L.I. [Quebec Univ., Chicoutimi, PQ (Canada). Industrial Chair on Atmospheric Icing of Power Network Equipment

    2005-07-01

    A mathematical model to calculate the minimum current intensity needed to prevent potentially damaging ice accretion on power line conductors was presented. The influence of atmospheric parameters such as wind speed, air temperature and liquid water were considered. Energy analysis was developed for an aluminum and steel reinforced conductor with circular cylindrical wire and concentric layers. Atmospheric parameters and the duration of the freezing conditions were considered with reference to the Joule effect. The model was then compared with experiments and simulations performed at an icing wind tunnel and in a climate room. It was determined that the equivalent thermal conductivity of the conductor should be assessed to identify the temperature distribution in the power line conductor. The radial component of the thermal conductivity was estimated on the basis of experiments performed in the wind tunnel, which provided a good estimation of the equivalent thermal conductivity and overall heat transfer coefficient around the stranded conductor. Experimental results were compared with values obtained from theoretically equivalent conductivity models. It was observed that the convective heat transfer coefficients around stranded conductors were higher than around smooth cylinders, and that the mathematical calculations slightly overestimated the wind tunnel measurements due to difficulties in estimating the wetted surface and the overall convection heat transfer coefficient around a stranded conductor. The typical range for the equivalent thermal conductivity of stranded conductors was also presented. 13 refs., 1 tab., 11 figs.

  6. Simulation Modeling Requirements for Loss-of-Control Accident Prevention of Turboprop Transport Aircraft

    Science.gov (United States)

    Crider, Dennis; Foster, John V.

    2012-01-01

    . This paper addresses simulation modeling requirements that are unique to turboprop transport aircraft and highlights the growing need for aerodynamic models suitable for stall training for these configurations. A review of prominent accidents that involved aerodynamic stall is used to illustrate various modeling features unique to turboprop configurations and the impact of stall behavior on susceptibility to loss of control that has led to new training requirements. This is followed by an overview of stability and control behavior of straight-wing turboprops, the related aerodynamic characteristics, and a summary of recent experimental studies on icing effects. In addition, differences in flight dynamics behavior between swept-wing jets and straight-wing turboprop configurations are discussed to compare and contrast modeling requirements. Specific recommendations for aerodynamic models along with further research needs and data measurements are also provided. 1

  7. Light - Instead of UV Protection: New Requirements for Skin Cancer Prevention.

    Science.gov (United States)

    Zastrow, Leonhard; Lademann, Jürgen

    2016-03-01

    The requirements on sunscreens have essentially changed, since some years ago it was demonstrated that approximately 50% of free radicals, that are formed in the skin by solar radiation, originate from the visible and infrared regions of the solar spectrum. In addition, a critical radical concentration threshold could be found. If this concentration, the free radical threshold value (FRTV), is exceeded, sunburn, immunosuppression and skin cancer may develop. Application of sunscreens and lotions protects against sunburn in the UV region of the solar spectrum and therefore is frequently used to extend people's stay in the sun. However, this behaviour can enhance the concentration of free radicals formed in the visible and infrared regions of the solar spectrum, so that the critical radical threshold is exceeded and the skin may be damaged. Copyright© 2016 International Institute of Anticancer Research (Dr. John G. Delinassios), All rights reserved.

  8. Experimental infrared measurements for hydrocarbon pollutant determination in subterranean waters

    OpenAIRE

    Lay-Ekuakille, A.; Palamara, I.; Caratelli, D.; Morabito, F.C.

    2013-01-01

    Subterranean waters are often polluted by industrial and anthropic effluents that are drained in subsoil. To prevent and control pollution, legislations of different developed countries require an online monitoring measurement, especially for detecting organic solvents (chlorinated and unchlorinated ones). Online measurements include both real-time and no real-time measurements. In general, it is difficult to implement real-time measurements in stricto sensu for online acquisitions on aqueous...

  9. CSL protein regulates transcription of genes required to prevent catastrophic mitosis in fission yeast.

    Science.gov (United States)

    Převorovský, Martin; Oravcová, Martina; Zach, Róbert; Jordáková, Anna; Bähler, Jürg; Půta, František; Folk, Petr

    2016-11-16

    For every eukaryotic cell to grow and divide, intricately coordinated action of numerous proteins is required to ensure proper cell-cycle progression. The fission yeast Schizosaccharomyces pombe has been instrumental in elucidating the fundamental principles of cell-cycle control. Mutations in S. pombe 'cut' (cell untimely torn) genes cause failed coordination between cell and nuclear division, resulting in catastrophic mitosis. Deletion of cbf11, a fission yeast CSL transcription factor gene, triggers a 'cut' phenotype, but the precise role of Cbf11 in promoting mitotic fidelity is not known. We report that Cbf11 directly activates the transcription of the acetyl-coenzyme A carboxylase gene cut6, and the biotin uptake/biosynthesis genes vht1 and bio2, with the former 2 implicated in mitotic fidelity. Cbf11 binds to a canonical, metazoan-like CSL response element (GTGGGAA) in the cut6 promoter. Expression of Cbf11 target genes shows apparent oscillations during the cell cycle using temperature-sensitive cdc25-22 and cdc10-M17 block-release experiments, but not with other synchronization methods. The penetrance of catastrophic mitosis in cbf11 and cut6 mutants is nutrient-dependent. We also show that drastic decrease in biotin availability arrests cell proliferation but does not cause mitotic defects. Taken together, our results raise the possibility that CSL proteins play conserved roles in regulating cell-cycle progression, and they could guide experiments into mitotic CSL functions in mammals.

  10. Syndecan-1 is required to maintain intradermal fat and prevent cold stress.

    Directory of Open Access Journals (Sweden)

    Ildiko Kasza

    2014-08-01

    Full Text Available Homeostatic temperature regulation is fundamental to mammalian physiology and is controlled by acute and chronic responses of local, endocrine and nervous regulators. Here, we report that loss of the heparan sulfate proteoglycan, syndecan-1, causes a profoundly depleted intradermal fat layer, which provides crucial thermogenic insulation for mammals. Mice without syndecan-1 enter torpor upon fasting and show multiple indicators of cold stress, including activation of the stress checkpoint p38α in brown adipose tissue, liver and lung. The metabolic phenotype in mutant mice, including reduced liver glycogen, is rescued by housing at thermoneutrality, suggesting that reduced insulation in cool temperatures underlies the observed phenotypes. We find that syndecan-1, which functions as a facultative lipoprotein uptake receptor, is required for adipocyte differentiation in vitro. Intradermal fat shows highly dynamic differentiation, continuously expanding and involuting in response to hair cycle and ambient temperature. This physiology probably confers a unique role for Sdc1 in this adipocyte sub-type. The PPARγ agonist rosiglitazone rescues Sdc1-/- intradermal adipose tissue, placing PPARγ downstream of Sdc1 in triggering adipocyte differentiation. Our study indicates that disruption of intradermal adipose tissue development results in cold stress and complex metabolic pathology.

  11. U.S. College and University Student Health Screening Requirements for Tuberculosis and Vaccine-Preventable Diseases, 2012

    Science.gov (United States)

    Jewett, A.; Bell, T; Cohen, NJ.; Buckley, K.; Leino, V.; Even, S.; Beavers, S.; Brown, C.; Marano, N.

    2016-01-01

    Objective Colleges are at risk for communicable disease outbreaks because of the high degree of person-to-person interactions and relatively crowded dormitory settings. This report describes the U.S. college student health screening requirements among U.S. resident and international students for tuberculosis (TB) and vaccine-preventable diseases (VPD) as it relates to the American College Health Association (ACHA) Guidelines. Methods/Participants In April 2012, U.S. college health administrators (N=2858) were sent online surveys to assess their respective school’s TB screening and immunization requirements. Results Surveys were completed by 308 (11%) schools. Most schools were aware of the ACHA immunization (78%) and TB screening (76%) guidelines. Schools reported having policies related to immunization screening (80.4%), immunization compliance (93%), TB screening (55%), and TB compliance (87%). Conclusion Most colleges were following ACHA guidelines. However, there are opportunities for improvement to fully utilize the recommendations and prevent outbreaks of communicable diseases among students in colleges. PMID:26730492

  12. Environmental pollution and kidney diseases.

    Science.gov (United States)

    Xu, Xin; Nie, Sheng; Ding, Hanying; Hou, Fan Fan

    2018-05-01

    The burden of disease and death attributable to environmental pollution is becoming a public health challenge worldwide, especially in developing countries. The kidney is vulnerable to environmental pollutants because most environmental toxins are concentrated by the kidney during filtration. Given the high mortality and morbidity of kidney disease, environmental risk factors and their effect on kidney disease need to be identified. In this Review, we highlight epidemiological evidence for the association between kidney disease and environmental pollutants, including air pollution, heavy metal pollution and other environmental risk factors. We discuss the potential biological mechanisms that link exposure to environmental pollutants to kidney damage and emphasize the contribution of environmental pollution to kidney disease. Regulatory efforts should be made to control environmental pollution and limit individual exposure to preventable or avoidable environmental risk. Population studies with accurate quantification of environmental exposure in polluted regions, particularly in developing countries, might aid our understanding of the dose-response relationship between pollutants and kidney diseases.

  13. The Federal Air Pollution Program.

    Science.gov (United States)

    National Air Pollution Control Administration (DHEW), Washington, DC.

    Described is the Federal air pollution program as it was in 1967. The booklet is divided into these major topics: History of the Federal Program; Research; Assistance to State and Local Governments; Abatement and Prevention of Air Pollution; Control of Motor Vehicle Pollution; Information and Education; and Conclusion. Federal legislation has…

  14. Marine pollution

    International Nuclear Information System (INIS)

    Albaiges, J.

    1989-01-01

    This book covers the following topics: Transport of marine pollutants; Transformation of pollutants in the marine environment; Biological effects of marine pollutants; Sources and transport of oil pollutants in the Persian Gulf; Trace metals and hydrocarbons in Syrian coastal waters; and Techniques for analysis of trace pollutants

  15. 42 CFR 136.404 - What does the Indian Child Protection and Family Violence Prevention Act require of the IHS and...

    Science.gov (United States)

    2010-10-01

    ... Protection and Family Violence Prevention § 136.404 What does the Indian Child Protection and Family Violence... 42 Public Health 1 2010-10-01 2010-10-01 false What does the Indian Child Protection and Family Violence Prevention Act require of the IHS and Indian Tribes or Tribal organizations receiving funds under...

  16. Investigation of Health Risks and Their Prevention in the Rapid Climate Changes and the Rise of Pollution of the Atmosphere in the Mountain Region of the North Caucasus

    Science.gov (United States)

    Babyakin, Alexander; Polozkov, Igor; Golitsyn, Georgy; Efimenko, Natalia; Zherlitsina, Liubov; Povolotskaya, Nina; Senik, Irina; Chalaya, Elena; Artamonova, Maria; Pogarski, Fedor

    2010-05-01

    atmospheric pollution making by Obukhov Institute of Atmospheric Physics RAS. The average weighted WPI forms the basis of weather type number, synoptic weather forecast allows you to define a subtype of the weather. This classification is used in the system of MWF in the resorts of Caucasian Mineral Waters (mountainous region of Northern Caucasus), making for the purpose of timely warnings of medical personnel of medical institutions to strengthen health surveillance and, if necessary, conduct prevention of MPR. MPR to changing weather conditions are most manifest in connection with resettlement of patients from their places of permanent residence to the unusual climatic conditions of the resort. In this regard, in order to enhance the spa rehabilitation of meteosensitive patients with coronary artery disease at PSRIC a physiological method was developed for early and routine prophylaxis of maladaptive pathological and, above all, MPR using the method of transcranial electric-pulse meso-diencephalic modulation by MDMK-4 apparatus with a frontooccipital location of the electrodes. Clinical manifestation of the MPR in adverse weather conditions in patients with coronary artery disease, hypertension with dysadaptation syndrome is characterized by frequent recurrences of angina, rhythm disorders, cerebral symptoms, vascular crisis, violations in the field of psycho-emotional area and other disorders. These meteopathies are eliminated with high efficiency using the MDMK-4 apparatus in individually selected modes at the planned rate of prophylaxis for 10 procedures. In order to urgent MPR prevention the procedures can be used situationally. The high preventive and curative effects of transcranial electric-pulse meso-diencephalic modulation of the MDMK-4 apparatus is shown by positive dynamics of the clinical status of patients, including data on the MPR test survey, the Kerdem vegetative index, rheoencephalography indicators, electrocardiography, neurovascular reactivity, Holter

  17. Preload versus coload and vasopressor requirement for the prevention of spinal anesthesia induced hypotension in non-obstetric patients

    International Nuclear Information System (INIS)

    Khan, M.U.; Aqil, M.

    2015-01-01

    To compare the effectiveness of preload and coload for the prevention of Spinal Induced Hypotension (SIH) and vasopressor requirements. Study Design: Randomized trial. Place and Duration of Study: Department of Anesthesia, The Aga Khan University Hospital, Karachi, Pakistan, from June 2007 - June 2010. Methodology: Sixty patients were randomly divided into preload and coload group of 30 each. Patients with ASA1 - 3, aged 20 - 60 years were included. Patients with history of IHD, COPD, BMI > 30 and surgical procedure TURP were excluded. All patients received crystalloid 10 ml/kg before induction of spinal anesthesia in preload group and at the time of spinal anesthesia in coload group. Blood pressure and heart rate were recorded at different time intervals till 45 minutes. Patients received ephedrine 5 mg when systolic blood pressure dropped below 90 mmHg and heart rate was less than 60 beats/minute and/or phenylephrine 50 micrograms when systolic blood pressure dropped below 90 mmHg and heart rate was more than 60 beats/minute. Results: There was no statistically significant difference at different time intervals in heart rate, systolic and mean arterial pressure between the groups. Diastolic blood pressure was significantly different in both groups at 6 - 15 minutes after spinal anesthesia. SIH occurred (21) 70% and (15) 50% in preload and coload groups, respectively (p=0.187). Ephedrine requirement for SIH was significantly high in preload group (p=0.017). Phenylephrine requirement for SIH was high in preload group which was statistically non-significant (p=0.285). Conclusion: Coload group has lower incidence of spinal induced hypotension and significantly less vasopressor requirement than the preload group. (author)

  18. Water Pollution

    Science.gov (United States)

    Bowen, H. J. M.

    1975-01-01

    Deals with water pollution in the following categories: a global view, self purification, local pollution, difficulties in chemical analysis, and remedies for water pollution. Emphasizes the extent to which man's activities have modified the cycles of certain elements. (GS)

  19. Air Pollution

    Science.gov (United States)

    Air pollution is a mixture of solid particles and gases in the air. Car emissions, chemicals from factories, ... Ozone, a gas, is a major part of air pollution in cities. When ozone forms air pollution, it's ...

  20. Application and practice of EU FP5. Research results in the area key action water - pollution prevention: are results fit for use?

    Energy Technology Data Exchange (ETDEWEB)

    Bittens, M. [Univ. Tuebingen (Germany). Center for Applied Geoscience; Prokop, G. [Umweltbundesamt, Wien (Austria)

    2003-07-01

    Embedded in the EU-funded project 'Innovative Management of Groundwater Resources in Europe - Training and RTD Co-ordination (IMAGE-TRAIN)' a two-phase (identification and testing) evaluation process was performed on basis of delivered research results from scientific projects running in the FP5 Key Action 'Management and Quality of Water - Pollution Prevention'. The 'Application and Practice Report', APR, documents available methods, concepts, and applications, which are qualified for supporting and enhancing the implementation processes of European policies and regulations with regard to the management and quality of water. Additionally, the APR determines boundary conditions for the application of available deliverable as result of the testing phase and facilitates the selection of the best available techniques for accompanying European implementation processes in accordance with the sustainable solutions strategy of European Union's 6{sup th} Environmental Action Programme 'Our Future, or choice'. IMAGE-TRAIN has the ambition to improve cooperation and interaction between ongoing research projects in the field of soil and groundwater contamination and to communicate new technology achievements to young scientists by means of training courses. IMAGE-TRAIn is a three year project which started in September 2001 and operates at two levels. (1) Senior level: At this level cluster meetings for researchers of ongoing research projects are being organised with the objective to establish topic links between RTD projects, dealing with contaminated land and groundwater and to promote their practical application. Furthermore practical case studies with selected experts are being organised to perform short feasibility studies related to current groundwater or mine water problems. (2) Junior level: At this level Advanced Study Courses are organised with theobjective to quickly transfer existing and emerging knowledge to young

  1. Forum environmental and energy technology 2013. Power-heat cogeneration and air pollution prevention; Forum Umwelt- und Energietechnik 2013. Kraftwaermekopplung und Luftreinhaltung

    Energy Technology Data Exchange (ETDEWEB)

    Carlowitz, Otto; Meyer, Sven

    2013-07-01

    The volume covers the following topics: The teaching reward 2013 - concept and implementation of the ''Forum environmental and energy technology''; energy efficient air pollution control and material recovery; air pollution control by oxidation; electrical energy production from low-temperature waste heat (ORC processes), electrical power production and process heat utilization.

  2. New valve with remote control and dismantling for polluting and dangerous fluid

    International Nuclear Information System (INIS)

    Villepreux, Robert.

    1980-01-01

    This invention relates to a valve for use in systems carrying polluting, corrosive or dangerous fluids requiring the use of biological protection. The facilities concerned are those in which fluids, mainly polluting, corrosive or dangerous liquids requiring the use of various types of biological protection, are handled. This is particularly so for nuclear installations in which the equipment is surrounded by protective shields which stop the radiation and prevent radioactive gases and aerosols from spreading [fr

  3. Granzyme A Is Required for Regulatory T-Cell Mediated Prevention of Gastrointestinal Graft-versus-Host Disease.

    Directory of Open Access Journals (Sweden)

    Sarvari Velaga

    Full Text Available In our previous work we could identify defects in human regulatory T cells (Tregs likely favoring the development of graft-versus-host disease (GvHD following allogeneic stem cell transplantation (SCT. Treg transcriptome analyses comparing GvHD and immune tolerant patients uncovered regulated gene transcripts highly relevant for Treg cell function. Moreover, granzyme A (GZMA also showed a significant lower expression at the protein level in Tregs of GvHD patients. GZMA induces cytolysis in a perforin-dependent, FAS-FASL independent manner and represents a cell-contact dependent mechanism for Tregs to control immune responses. We therefore analyzed the functional role of GZMA in a murine standard model for GvHD. For this purpose, adoptively transferred CD4+CD25+ Tregs from gzmA-/- mice were analyzed in comparison to their wild type counterparts for their capability to prevent murine GvHD. GzmA-/- Tregs home efficiently to secondary lymphoid organs and do not show phenotypic alterations with respect to activation and migration properties to inflammatory sites. Whereas gzmA-/- Tregs are highly suppressive in vitro, Tregs require GZMA to rescue hosts from murine GvHD, especially regarding gastrointestinal target organ damage. We herewith identify GZMA as critical effector molecule of human Treg function for gastrointestinal immune response in an experimental GvHD model.

  4. Agricultural nonpoint source pollution: prevention and estimate methods; L'inquinamento di origine agricola: quali strumenti di prevenzione e stima?

    Energy Technology Data Exchange (ETDEWEB)

    Caffarelli, V.; Rapagnani, M.R.; Triolo, L. [ENEA, Centro Ricerche Casaccia, Rome (Italy). Dipt. Innovazione

    1999-07-01

    Non point source pollutants, such as pesticides and fertilizers derived from agricultural activities, are recognized as an important threat to environment and human health. To prevent the adverse effects of these agrochemicals it is necessary to provide growers and decision makers with easy-to-use information. Attempts have been made to put information on pesticides environmental and health effects into a formula that could summarize, in a single number, these effects. However a single number could be misleading because of the lack of information on chemical-physical parameters and the difficulty to evaluate the relative importance of various environmental and health effects. As an alternative it is here proposed an approach based on schedule containing information, for each pesticides, such as short and long term effects on human health, environmental fate and degradation time, capacity to bio accumulate, toxicity of degradation products. Using information in the schedule, decision makers could make more circumstantiate choices and could program the best agricultural actions under particular environmental circumstances with less impact on man and environment. [Italian] L'inquinamento diffuso derivante dall'uso dei fertilizzanti e dei pesticidi in agricoltura, rappresenta un rischio rilevante per l'ambiente e la salute umana. Al fine di prevenire tale rischio e' necessario fornire a coloro che gestiscono e pianificano le attivita' agricole informazioni facilmente comprensibili, mirate a ridurre o eliminare gli effetti indesiderati derivanti dai prodotti agrochimici. Tentativi sono stati fatti per sviluppare metodologie che sintetizzino queste informazioni in un indice numerico in modo da stilare una graduatoria di pericolosita' dei singoli prodotti. Si propone, in questo lavoro, un approccio basato sulla elaborazione di schede, per ogni principio attivo, che contengono una serie di informazioni quali gli effetti a breve e lungo termine

  5. Development of a Preventive HIV Vaccine Requires Solving Inverse Problems Which Is Unattainable by Rational Vaccine Design

    Directory of Open Access Journals (Sweden)

    Marc H. V. Van Regenmortel

    2018-01-01

    Full Text Available Hypotheses and theories are essential constituents of the scientific method. Many vaccinologists are unaware that the problems they try to solve are mostly inverse problems that consist in imagining what could bring about a desired outcome. An inverse problem starts with the result and tries to guess what are the multiple causes that could have produced it. Compared to the usual direct scientific problems that start with the causes and derive or calculate the results using deductive reasoning and known mechanisms, solving an inverse problem uses a less reliable inductive approach and requires the development of a theoretical model that may have different solutions or none at all. Unsuccessful attempts to solve inverse problems in HIV vaccinology by reductionist methods, systems biology and structure-based reverse vaccinology are described. The popular strategy known as rational vaccine design is unable to solve the multiple inverse problems faced by HIV vaccine developers. The term “rational” is derived from “rational drug design” which uses the 3D structure of a biological target for designing molecules that will selectively bind to it and inhibit its biological activity. In vaccine design, however, the word “rational” simply means that the investigator is concentrating on parts of the system for which molecular information is available. The economist and Nobel laureate Herbert Simon introduced the concept of “bounded rationality” to explain why the complexity of the world economic system makes it impossible, for instance, to predict an event like the financial crash of 2007–2008. Humans always operate under unavoidable constraints such as insufficient information, a limited capacity to process huge amounts of data and a limited amount of time available to reach a decision. Such limitations always prevent us from achieving the complete understanding and optimization of a complex system that would be needed to achieve a truly

  6. Plasmodium falciparum Hep1 Is Required to Prevent the Self Aggregation of PfHsp70-3.

    Directory of Open Access Journals (Sweden)

    David O Nyakundi

    Full Text Available The majority of mitochondrial proteins are encoded in the nucleus and need to be imported from the cytosol into the mitochondria, and molecular chaperones play a key role in the efficient translocation and proper folding of these proteins in the matrix. One such molecular chaperone is the eukaryotic mitochondrial heat shock protein 70 (Hsp70; however, it is prone to self-aggregation and requires the presence of an essential zinc-finger protein, Hsp70-escort protein 1 (Hep1, to maintain its structure and function. PfHsp70-3, the only Hsp70 predicted to localize in the mitochondria of P. falciparum, may also rely on a Hep1 orthologue to prevent self-aggregation. In this study, we identified a putative Hep1 orthologue in P. falciparum and co-expression of PfHsp70-3 and PfHep1 enhanced the solubility of PfHsp70-3. PfHep1 suppressed the thermally induced aggregation of PfHsp70-3 but not the aggregation of malate dehydrogenase or citrate synthase, thus showing specificity for PfHsp70-3. Zinc ions were indeed essential for maintaining the function of PfHep1, as EDTA chelation abrogated its abilities to suppress the aggregation of PfHsp70-3. Soluble and functional PfHsp70-3, acquired by co-expression with PfHep-1, will facilitate the biochemical characterisation of this particular Hsp70 protein and its evaluation as a drug target for the treatment of malaria.

  7. Müller glia-derived PRSS56 is required to sustain ocular axial growth and prevent refractive error.

    Science.gov (United States)

    Paylakhi, Seyyedhassan; Labelle-Dumais, Cassandre; Tolman, Nicholas G; Sellarole, Michael A; Seymens, Yusef; Saunders, Joseph; Lakosha, Hesham; deVries, Wilhelmine N; Orr, Andrew C; Topilko, Piotr; John, Simon Wm; Nair, K Saidas

    2018-03-01

    A mismatch between optical power and ocular axial length results in refractive errors. Uncorrected refractive errors constitute the most common cause of vision loss and second leading cause of blindness worldwide. Although the retina is known to play a critical role in regulating ocular growth and refractive development, the precise factors and mechanisms involved are poorly defined. We have previously identified a role for the secreted serine protease PRSS56 in ocular size determination and PRSS56 variants have been implicated in the etiology of both hyperopia and myopia, highlighting its importance in refractive development. Here, we use a combination of genetic mouse models to demonstrate that Prss56 mutations leading to reduced ocular size and hyperopia act via a loss of function mechanism. Using a conditional gene targeting strategy, we show that PRSS56 derived from Müller glia contributes to ocular growth, implicating a new retinal cell type in ocular size determination. Importantly, we demonstrate that persistent activity of PRSS56 is required during distinct developmental stages spanning the pre- and post-eye opening periods to ensure optimal ocular growth. Thus, our mouse data provide evidence for the existence of a molecule contributing to both the prenatal and postnatal stages of human ocular growth. Finally, we demonstrate that genetic inactivation of Prss56 rescues axial elongation in a mouse model of myopia caused by a null mutation in Egr1. Overall, our findings identify PRSS56 as a potential therapeutic target for modulating ocular growth aimed at preventing or slowing down myopia, which is reaching epidemic proportions.

  8. Müller glia-derived PRSS56 is required to sustain ocular axial growth and prevent refractive error.

    Directory of Open Access Journals (Sweden)

    Seyyedhassan Paylakhi

    2018-03-01

    Full Text Available A mismatch between optical power and ocular axial length results in refractive errors. Uncorrected refractive errors constitute the most common cause of vision loss and second leading cause of blindness worldwide. Although the retina is known to play a critical role in regulating ocular growth and refractive development, the precise factors and mechanisms involved are poorly defined. We have previously identified a role for the secreted serine protease PRSS56 in ocular size determination and PRSS56 variants have been implicated in the etiology of both hyperopia and myopia, highlighting its importance in refractive development. Here, we use a combination of genetic mouse models to demonstrate that Prss56 mutations leading to reduced ocular size and hyperopia act via a loss of function mechanism. Using a conditional gene targeting strategy, we show that PRSS56 derived from Müller glia contributes to ocular growth, implicating a new retinal cell type in ocular size determination. Importantly, we demonstrate that persistent activity of PRSS56 is required during distinct developmental stages spanning the pre- and post-eye opening periods to ensure optimal ocular growth. Thus, our mouse data provide evidence for the existence of a molecule contributing to both the prenatal and postnatal stages of human ocular growth. Finally, we demonstrate that genetic inactivation of Prss56 rescues axial elongation in a mouse model of myopia caused by a null mutation in Egr1. Overall, our findings identify PRSS56 as a potential therapeutic target for modulating ocular growth aimed at preventing or slowing down myopia, which is reaching epidemic proportions.

  9. Müller glia-derived PRSS56 is required to sustain ocular axial growth and prevent refractive error

    Science.gov (United States)

    Tolman, Nicholas G; Sellarole, Michael A.; Saunders, Joseph; Lakosha, Hesham; Topilko, Piotr; John, Simon WM.

    2018-01-01

    A mismatch between optical power and ocular axial length results in refractive errors. Uncorrected refractive errors constitute the most common cause of vision loss and second leading cause of blindness worldwide. Although the retina is known to play a critical role in regulating ocular growth and refractive development, the precise factors and mechanisms involved are poorly defined. We have previously identified a role for the secreted serine protease PRSS56 in ocular size determination and PRSS56 variants have been implicated in the etiology of both hyperopia and myopia, highlighting its importance in refractive development. Here, we use a combination of genetic mouse models to demonstrate that Prss56 mutations leading to reduced ocular size and hyperopia act via a loss of function mechanism. Using a conditional gene targeting strategy, we show that PRSS56 derived from Müller glia contributes to ocular growth, implicating a new retinal cell type in ocular size determination. Importantly, we demonstrate that persistent activity of PRSS56 is required during distinct developmental stages spanning the pre- and post-eye opening periods to ensure optimal ocular growth. Thus, our mouse data provide evidence for the existence of a molecule contributing to both the prenatal and postnatal stages of human ocular growth. Finally, we demonstrate that genetic inactivation of Prss56 rescues axial elongation in a mouse model of myopia caused by a null mutation in Egr1. Overall, our findings identify PRSS56 as a potential therapeutic target for modulating ocular growth aimed at preventing or slowing down myopia, which is reaching epidemic proportions. PMID:29529029

  10. Project of law authorizing the adhesion to the protocol of 1997 modifying the international convention of 1973 for the prevention of the pollution by ships, such as modified by the related protocol of 1978; Projet de loi autorisant l'adhesion au protocole de 1997 modifiant la convention internationale de 1973 pour la prevention de la pollution par les navires, telle que modifiee par le protocole de 1978 y relatif

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-04-01

    The first international agreement of May 12, 1954, for the protection of the marine and coastal environments against pollution was replaced on November 2, 1973 by a more detailed convention for the prevention of the pollution by ships. The 25 rules defined in the appendix 1 of this last document were modified and completed by the protocol of February 17, 1978. To make this system even more constraining for the atmospheric pollution, a diplomatic conference took place in September 1997 at the head office of the international maritime organization in London (UK). This conference has adopted a protocol which introduced a new appendix no. 6 in the text of the 1973 convention for the abatement of the emissions of sulfur compounds and other polluting combustion products in case of oil-tank burning. This document is a project of law authorizing the adhesion of France to the protocol of 1997. It summarizes the main content of the articles of this protocol, and in particular the rules introduced in the new appendix. The full text of the protocol and of its appendixes are also attached. (J.S.)

  11. 77 FR 12286 - Final National Pollutant Discharge Elimination System (NPDES) General Permit for Stormwater...

    Science.gov (United States)

    2012-02-29

    ..., pollution prevention, water quality-based requirements, inspections, corrective action, and permit... industry on December 1, 2009. The permit also includes new water quality-based requirements for... Mexico, Indian Country Lands, Puerto Rico, Washington, DC, and U.S. territories and protectorates. DATES...

  12. Water pollution

    OpenAIRE

    Institute, Marine

    2013-01-01

    Students will learn about what causes water pollution and how to be environmentally aware. *Note: Students should understand the concept of the water cycle before moving onto water pollution (see Lesson Plan “Oceans all Around Us”).

  13. Semi-recumbent position versus supine position for the prevention of ventilator-associated pneumonia in adults requiring mechanical ventilation.

    Science.gov (United States)

    Wang, Li; Li, Xiao; Yang, Zongxia; Tang, Xueli; Yuan, Qiang; Deng, Lijing; Sun, Xin

    2016-01-08

    Ventilator-associated pneumonia (VAP) is associated with increased mortality, prolonged length of hospital stay and increased healthcare costs in critically ill patients. Guidelines recommend a semi-recumbent position (30º to 45º) for preventing VAP among patients requiring mechanical ventilation. However, due to methodological limitations in existing systematic reviews, uncertainty remains regarding the benefits and harms of the semi-recumbent position for preventing VAP. To assess the effectiveness and safety of semi-recumbent positioning versus supine positioning to prevent ventilator-associated pneumonia (VAP) in adults requiring mechanical ventilation. We searched CENTRAL (2015, Issue 10), which includes the Cochrane Acute Respiratory Infections Group's Specialised Register, MEDLINE (1946 to October 2015), EMBASE (2010 to October 2015), CINAHL (1981 to October 2015) and the Chinese Biomedical Literature Database (CBM) (1978 to October 2015). We included randomised controlled trials (RCTs) comparing semi-recumbent versus supine positioning (0º to 10º), or RCTs comparing alternative degrees of positioning in mechanically ventilated patients. Our outcomes included clinically suspected VAP, microbiologically confirmed VAP, intensive care unit (ICU) mortality, hospital mortality, length of ICU stay, length of hospital stay, duration of ventilation, antibiotic use and any adverse events. Two review authors independently and in duplicate screened titles, abstracts and full texts, assessed risk of bias and extracted data using standardised forms. We calculated the mean difference (MD) and 95% confidence interval (95% CI) for continuous data and the risk ratio (RR) and 95% CI for binary data. We performed meta-analysis using the random-effects model. We used the grading of recommendations, assessment, development and evaluation (GRADE) approach to grade the quality of evidence. We included 10 trials involving 878 participants, among which 28 participants in two

  14. Water Pollution

    International Nuclear Information System (INIS)

    Goni, J.

    1984-01-01

    This work is about the water pollution. The air and the water interaction cycles is the main idea of the geochemical pollution conception. In the water surface as well as in the deep aquifers we can found cough metals or minerals from the athmosferic air. The activities of mercury fluor and nitrates are important to the pollution study

  15. Air Pollution.

    Science.gov (United States)

    Barker, K.; And Others

    Pollution of the general environment, which exposes an entire population group for an indeterminate period of time, certainly constitutes a problem in public health. Serious aid pollution episodes have resulted in increased mortality and a possible relationship between chronic exposure to a polluted atmosphere and certain diseases has been…

  16. 41 CFR 105-68.340 - If I disclose unfavorable information required under § 105-68.335, will I be prevented from...

    Science.gov (United States)

    2010-07-01

    ... Management Regulations System (Continued) GENERAL SERVICES ADMINISTRATION Regional Offices-General Services... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false If I disclose unfavorable information required under § 105-68.335, will I be prevented from participating in the...

  17. Polluted Runoff: Nonpoint Source Pollution

    Science.gov (United States)

    Nonpoint Source (NPS) pollution is caused by rainfall or snowmelt moving over and through the ground, it picks up and carries natural and human-made pollutants, depositing them into lakes, rivers, wetlands, coastal waters and ground waters.

  18. How to comply with MARPOL 73/78 : A commentary on the IMO’s pollution-prevention instrument and the implications for the shipping industry

    NARCIS (Netherlands)

    Djadjev, Ilian

    2015-01-01

    The current paper aims at clarifying the extensive MARPOL 73/78 – the IMO’s first and only integrated and all-embracing convention targeting pollution from ships – and its effects on the shipping industry, in particular shipowners and their P&I insurers. This is an essential topic since nations are

  19. Air pollution

    Energy Technology Data Exchange (ETDEWEB)

    Strauss, W; Mainwaring, S J

    1984-01-01

    This book deals with the nature of air pollution. The numerous sources of unwanted gases and dust particles in the air are discussed. Details are presented of the effects of pollutants on man, animals, vegetation and on inanimate materials. Methods used to measure, monitor and control air pollution are presented. The authors include information on the socio-economic factors which impinge on pollution control and on the problems the future will bring as methods of generating energy change and industries provide new sources of pollutants.

  20. Application of international maritime protection conventions to radioactive pollution

    International Nuclear Information System (INIS)

    Stein, R.M.; Walden, R.M.

    1975-01-01

    The application of international maritime protection conventions to radioactive pollution is discussed with particular emphasis on the 1972 London Convention on prevention of marine pollution by dumping of wastes and other matter. Under that Convention, wastes are divided into three categories according to their radioactivity. High level wastes, whose dumping is prohibited, and low level wastes which require a special dumping permit are studied on the basis of definitions established by the International Atomic Energy Agency. Mention is made of the IAEA-recommended procedures for issue of the specific dumping as well as of the exceptions provided for ships and aircraft enjoying State immunity and cases of force majeure or emergencies. Also dealt with are the other international Conventions applying to prevention of radioactive marine pollution [fr

  1. Trade-off between water pollution prevention, agriculture profit, and farmer practice--an optimization methodology for discussion on land-use adjustment in China.

    Science.gov (United States)

    Liu, Jianchang; Zhang, Luoping; Zhang, Yuzhen; Deng, Hongbing

    2015-01-01

    Agricultural decision-making to control nonpoint source (NPS) water pollution may not be efficiently implemented, if there is no appropriate cost-benefit analysis on agricultural management practices. This paper presents an interval-fuzzy linear programming (IFLP) model to deal with the trade-off between agricultural revenue, NPS pollution control, and alternative practices through land adjustment for Wuchuan catchment, a typical agricultural area in Jiulong River watershed, Fujian Province of China. From the results, the lower combination of practice 1, practice 2, practice 3, and practice 7 with the land area of 12.6, 5.2, 145.2, and 85.3 hm(2), respectively, could reduce NPS pollution load by 10%. The combination yields an income of 98,580 Chinese Yuan/a. If the pollution reduction is 15%, the higher combination need practice 1, practice 2, practice 3, practice 5, and practice 7 with the land area of 54.4, 23.6, 18.0, 6.3, and 85.3 hm(2), respectively. The income of this combination is 915,170 Chinese Yuan/a. The sensitivity analysis of IFLP indicates that the cost-effective practices are ranked as follows: practice 7 > practice 2 > practice 1 > practice 5 > practice 3 > practice 6 > practice 4. In addition, the uncertainties in the agriculture NPS pollution control system could be effectively quantified by the IFLP model. Furthermore, to accomplish a reasonable and applicable project of land-use adjustment, decision-makers could also integrate above solutions with their own experience and other information.

  2. Air pollution engineering

    Science.gov (United States)

    Maduna, Karolina; Tomašić, Vesna

    2017-11-01

    Air pollution is an environmental and a social problem which leads to a multitude of adverse effects on human health and standard of human life, state of the ecosystems and global change of climate. Air pollutants are emitted from natural, but mostly from anthropogenic sources and may be transported over long distances. Some air pollutants are extremely stable in the atmosphere and may accumulate in the environment and in the food chain, affecting human beings, animals and natural biodiversity. Obviously, air pollution is a complex problem that poses multiple challenges in terms of management and abatements of the pollutants emission. Effective approach to the problems of air pollution requires a good understanding of the sources that cause it, knowledge of air quality status and future trends as well as its impact on humans and ecosystems. This chapter deals with the complexities of the air pollution and presents an overview of different technical processes and equipment for air pollution control, as well as basic principles of their work. The problems of air protection as well as protection of other ecosystems can be solved only by the coordinated endeavors of various scientific and engineering disciplines, such as chemistry, physics, biology, medicine, chemical engineering and social sciences. The most important engineering contribution is mostly focused on development, design and operation of equipment for the abatement of harmful emissions into environment.

  3. Environmental pollution studies

    CERN Document Server

    Best, Gerry

    1999-01-01

    This book examines a number of important contemporary environmental issues in an informative and easy-to-read style. The topics covered include sewage treatment, eutrophication, air pollution, acid rain, global warming and pollution from farming. A particularly valuable section of the book describes a range of tests that can be carried out on various environmental parameters. The procedures require relatively simple equipment and they have been pre-tested in a school laboratory. "Environmental Pollution Studies" will be of value to senior school pupils and students at college or university embarking on courses in environmental science.

  4. Million Hearts 2022: Understanding the Links between Environmental Pollutant Exposure and Cardiovascular and Cerebrovascular Events - Justus-Warren Heart Disease and Stroke Prevention Task Force

    Science.gov (United States)

    The webinar was requested by the Justus-Warren Heart Disease and Stroke Prevention Task Force. From their website, “The task force was established in 1995 in North Carolina to provide statewide leadership for the prevention and management of cardiovascular disease. Meetings are...

  5. Does prevention of risk behaviour in primary care require a gender-specific approach? A cross-sectional study.

    NARCIS (Netherlands)

    Vos, H.M.M.; Schellevis, F.G.; Berkmortel, H. van den; Heuvel, L.G.A.M. van den; Bor, H.H.J.; Lagro-Janssen, A.L.M.

    2013-01-01

    Background: In planning a prevention programme, it is important to know to what extent gender, risk behaviour and GP consultation need to be taken into account. Objective: To determine whether gender plays a role in the relation between risk behaviour and use of GP services. Methods: The data used

  6. Does prevention of risk behaviour in primary care require a gender-specific approach? A cross-sectional study

    NARCIS (Netherlands)

    Vos, H.M.M.; Schellevis, F.G.; van den Berkmortel, H.; van den Heuvel, L.G.A.M.; Bor, H.H.J.; Lagro-Janssen, A.L.M.

    2013-01-01

    Backgroun: In planning a prevention programme, it is important to know to what extent gender, risk behaviour and GP consultation need to be taken into account. Objective. To determine whether gender plays a role in the relation between risk behaviour and use of GP services. Methods: The data used in

  7. Atmospheric pollution

    International Nuclear Information System (INIS)

    Lambrozo, J.; Guillossou, G.

    2008-01-01

    The atmosphere is the reservoir of numerous pollutants (nitrogen oxides, sulfur oxides, carbon oxides, particulates, volatile organic compounds, polycyclic aromatic hydrocarbons) from natural origin or anthropogenic origin ( industry, transport, agriculture, district heating). With epidemiologic studies the atmospheric pollution is associated with an increase of respiratory and cardiovascular diseases. At the european level, the technological progress, the legislation have allowed a reduction of pollutant emissions, however these efforts have to be continued because the sanitary impact of atmospheric pollution must not be underestimated, even if the risks appear less important that these ones in relation with tobacco, inside pollution or others factors of cardiovascular risks. Indeed, on these last factors an individual action is possible for the exposure to air pollution people have no control. (N.C.)

  8. Groundwater pollution: Are we monitoring appropriate parameters ...

    African Journals Online (AJOL)

    Groundwater pollution is a worldwide phenomenon with potentially disastrous consequences. Prevention of pollution is the ideal approach. However, in practice groundwater quality monitoring is the main tool for timely detection of pollutants and protection of groundwater resources. Monitoring groundwater quality is a ...

  9. Environmental pollution

    International Nuclear Information System (INIS)

    Odzuck, W.

    1982-01-01

    The volume of the anthropogenic pollution of the environment (incl. radioactivity) is of great economical importance and has also a meaning to the health and happiness of people. The pocket book introduces into the whole problem by giving exact information and data. After a general survey, the pollutions of urban-industrial, and aquatic ecosystems are dealt with. The book closes with indications as to general principles, specific dangers, and the fature development of the environmental pollution. (orig.) [de

  10. Air pollution

    OpenAIRE

    MacKenbach, JP; Henschel, S; Goodman, P; McKee, M

    2013-01-01

    The human costs of air pollution are considerable in Jordan. According to a report published in 2000 by the World Bank under the Mediterranean Environmental Technical Assistance Program (METAP), approximately 600 people die prematurely each year in Jordan because of urban pollution. 50-90% of air pollution in Jordanian towns is caused by road traffic. Readings taken in 2007 by Jordanian researchers showed that levels of black carbon particles in the air were higher in urban areas (caused by v...

  11. Understanding environmental pollution: a primer. 2nd ed.

    Energy Technology Data Exchange (ETDEWEB)

    Marquita K. Hill [University of Maine, Orono, MN (United States)

    2004-08-15

    The book moves from the definition of pollution and how pollutants behave, to air and water pollution basics, pollution and global change, solid waste, and pollution in the home. It also discusses persistent and bioaccumulative chemicals, and pesticides, and it places greater stress on global pollutants. The relationship between energy generation and use, and pollution is stressed, as well as the importance of going beyond pollution control, to pollution prevention. Impacts on human and environmental health are emphasized throughout. Contents are: 1. Understanding pollution; 2. Reducing pollution; 3. Chemical toxicity; 4. Chemical exposures and risk assessment; 5. Ambient air pollution; 6. Acid deposition; 7. Global climate change; 8. Stratispheric ozone depletion; 9. Water pollution; 10. Drinking water; 11. Solid waste; 12. Hazardous waste; 13. Energy; 14. Persistent, bioaccumulative and toxic; 15. Metals; 16. Pesticides; 17. Pollution at home; and 18. Zero waste, zero emissions. 69 figs., 42 tabs.

  12. Implementation of the Clean Air Act, Title III, Section 112(r) Prevention of Accidental Release Rule requirements at U.S. DOE Oak Ridge Reservation facilities

    International Nuclear Information System (INIS)

    Humphreys, M.P.

    1997-01-01

    Title III, Section 112(r) of the Clean Air Act (CAA) Amendments of 1990 requires the Environmental Protection Agency (EPA) to promulgate regulations to prevent accidental releases of regulated substances and to reduce the severity of those releases that do occur. The final EPA rule for Risk Management Programs under Section 112(r)(7) of the CAA, promulgated June 20, 1996, applies to all stationary sources with processes that contain more than a threshold quantity of any of 139 regulated substances listed under 40 CFR 68.130. All affected sources will be required to prepare a risk management plan which must be submitted to EPA and be made available to state and local governments and to the public. This paper will provide details of initiatives underway at US Department of Energy (DOE) Oak Ridge Reservation (ORR) Facilities for implementation of the Prevention of Accidental Release Rule. The ORR encompasses three DOE Facilities: the Y-12 Plant, Oak Ridge National Laboratory (ORNL), and the K-25 Site. The Y-12 Plant manufactures component parts for the national nuclear weapons program; the ORNL is responsible for research and development activities including nuclear engineering, engineering technologies, and the environmental sciences; and the K-25 Site conducts a variety of research and development activities and is the home of a mixed waste incinerator. ORR activities underway and soon to be undertaken toward implementation of the Prevention of Accidental Release Rule include: compilation of inventories of regulated substances at all processes at each of the three ORR Facilities for determination of affected processes and facilities; plans for inventory reduction to levels below threshold quantities, where necessary and feasible; determination of the overlap of processes subject to the OSHA PSM Standard and determination of parallel requirements; preparation of Risk Management Plans and Programs for affected processes and facilities including detailed requirements

  13. Turbo-gas emissions and integrated pollution prevention and control (IPPC); Emissioni da turbogas e prevenzione e limitazione integrata dell'inquinamento

    Energy Technology Data Exchange (ETDEWEB)

    Mariani, M. [ISPESL/DIPIA, Roma (Italy); Sera, B. [Roccadarce (Italy)

    2005-10-15

    The present paper considers the gas-turbine pollution and joints out that the NO, is the most important pollutant among others pollutants as well as the carbon oxide and the volatile organic compounds because the NO{sub x}, has a high mass production rate (in the combustion chamber), elevated toxicity to the ecosystem and because of being in the atmosphere a precursor of secondary ultrafine particles PM{sub 2,5}. In with reference to the integrated pollution and control (IPPC) the job shows schemes of chain chemical reactions which are on the base of the formation of different types of NO{sub x}, thermal and organic, and it illustrates the influence of some operative parameters on the combustion's efficiency and then on the NO{sub x}, production rate. Also, the study gives the best absolvable techniques (BAT) to reduce the NO{sub x}, production rate and to demolish it before its introduction, as well as gas exhaust, in the atmosphere. At the end, the work shows that the gas-turbine are to consider thermal engines with a little environment impact index specially when they make use of the natural gas, as well as fuel. [Italian] Lo studio considera gli inquinanti emessi dalle turbine a gas ed evidenzia che l'ossido di azoto NO, e quell'inquinante che e degno di attenzione a causa del suo alto tasso di produzione in camera di combustione (notevolmente piu alto di quello dell'ossido di carbonio e dei composti organici volatili), della sua elevata tossicita nei confronti dell'ecosistema e per il fatto di essere in atmosfera un precursore del particolato secondario ultrafino PM{sub 2},{sub 5}. In riferimento. alla prevenzione e limitazione integrata dell'inquinamento lo studio espone gli schemi di reazioni chimiche che sono alla base della formazione dei vari tipi di NO{sub x}, quello termico e quello organico, che si generano in camera di combustione ed inoltre illustra l'influenza di alcuni parametri operativi sull'efficienza del

  14. Air pollution

    International Nuclear Information System (INIS)

    Anon.

    2008-01-01

    Air pollution has accompanied and developed with the industrial age, since its beginnings. This very complete review furnishes the toxicological data available for the principal pollutants and assesses the epidemiologic studies thus far conducted. It also describes European regulations and international commitments for the reduction of emissions. (author)

  15. A management scheme for reducing pollution at air discharge facility in advance

    Energy Technology Data Exchange (ETDEWEB)

    Kong, Sung Yong; Lee, Shin Chul [Korea Environment Institute, Seoul (Korea)

    1998-12-01

    The developed countries are implementing a policy minimizing damage from environmental pollution by reducing discharge in advance as well as the aftermath of a pollutant. The typical example is to use BAT (Best Available Technology). This is to prevent environmental damage by reducing the discharge of pollutants with available technology and to secure environmental margin to enable industrial activities of future generation. Therefore, the feasibility of introducing BAT requirement system was reviewed by considering foreign examples and Korean situation. 38 refs., 8 figs., 69 tabs.

  16. Air Pollution Monitoring Changes to Accompany the Transition from a Control to a Systems Focus

    Directory of Open Access Journals (Sweden)

    Daniel A. Vallero

    2016-11-01

    Full Text Available During the 20th century, air pollution control technologies grew at an amazingly rapid rate. Air quality in much of the industrialized world greatly improved as the efficiencies of these technologies improved. This continued improvement in pollution control has more recently been complemented with measures to prevent the emission of air pollutants. The previous, exclusive focus on treatment requires systems thinking. This review provides a framework for this Special Issue of Sustainability by describing the new tools that are needed to support this new, broader focus, including life cycle assessments, exposure models, and sustainable design.

  17. Orphan sources and the challenges: requirement for the prevention of malevolent use of radioactive sources and preparedness for radiological emergencies

    International Nuclear Information System (INIS)

    Pradeepkumar, K.S.; Sharma, D.N.

    2006-01-01

    Challenges from smuggled or illegally transported radioactive sources with intention of causing threats to the society are similar to the radiological emergencies possible from misplaced/lost radioactive sources. While large number of radioactive sources are transported and are in use world over, the emergency preparedness and response system is not adequately developed compared to that for nuclear facilities. After the terrorist attack on W.T.C., there is concern world over about the malicious use of radioactive material calling for improving the emergency response system and international cooperation for preventing illicit trafficking of radioactive sources/material. Extremely sensitive state-of-the art monitoring systems installed at appropriate locations and periodic mobile radiation monitoring around suspected areas can be deterrent and can prevent the illicit trafficking of radioactive sources. Unless every nation ensures strict administrative control over the sources and implement usage of state-of-the art systems and methodology for early detection/prevention of illegal movement of sources within the territory and across its boundaries, the challenges from the orphan sources will remain for ever. The issues and challenges of man made radiological emergencies, remedial measures and the methodology for prevention and management of such emergencies are discussed here. The threat from an orphan source depends on many parameters. The type and quantity of the radionuclide, physical and chemical form influencing dispersion in air, deposition, solubility, migration in soil etc., can vary the radiological consequences when the source gets crushed accidentally along with scrap or is used for malevolent purposes. Depending on the level of environmental contamination, long term effects of the radiological emergency can significantly vary. Development of capability for quick detection, assessment and response are essential if prevention of theft/misuse of such sources

  18. Management of polluted deposit in lake and river

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Chang Hee; Kim, Eun Jung [Korea Environment Institute, Seoul (Korea)

    1998-12-01

    In this study, the perception and problem of polluted deposit in Korea, which does not have a clear concept of it, were analyzed and the need of a comprehensive polluted deposit management, including the present condition of pollution, assessment, pollution prevention, and disposal of polluted deposit, was presented. Based on the analysis on foreign management system, the framework of polluted deposit management in Korea was provided. 84 refs., 11 figs., 40 tabs.

  19. Prevention of condenser tubes corroson from polluted sea wtaer at Saijo thermal power station. Saijo hatsudensho ni okeru fukusuiki kan no boshoku taisaku

    Energy Technology Data Exchange (ETDEWEB)

    Okada, T.; Sato, N.; Ito, M. (Shikoku Electric Power Co. Inc., Kagawa (Japan))

    1991-03-15

    After the oil shock, Saijou thermal power station converted its energy source into coal to diversify the power source. With rising operation rate at the plant after fuel conversion, leaky condenser tubes have increased. Such leakage concentrated especially in new 70/30 cupro-nickel tubes equipped in air cooling zones of the condenser. This report investigates the cause of this leakage and describes the study results on the corrosion prevention. Consequently, following two measures were taken: a measure to prevent local erosion of aluminum brass pipes by means of preventing inflow of foreign materials such as seashells; a measure to prevent corrosion of 70/30 cupro-nickel sulfide by strengthening the injection of ferrous sulfate and by test loading of coated tubes. As a result, no sea water was leaked. Moreover, it was found through the eddy current examination that sulfide corrosion of the new 70/30 cupro-nickel tubes was reduced by iron coat and the rate of losing its thickness decreased remarkably. 1 ref., 15 figs., 5 tabs.

  20. Ultrasonic Guided Wave Technology for Non-Invasive Assessment of Corrosion-Induced Damage in Piping for Pollution Prevention in DOD Fuel Storage Facilities

    Science.gov (United States)

    2011-08-01

    using a mixture of rock salt and tap water. A combination of lacquer and duct tape was used to mask the desired corrosion areas and to prevent excessive...Corrosion Measurements," NDT efT E International, Vol. 37, No.3, 2004, pp. 167-180. Demma, A, P. Cawley, M. Lowe and B. Pavlakovic, "The Effect of

  1. Rca1 inhibits APC-Cdh1(Fzr) and is required to prevent cyclin degradation in G2.

    Science.gov (United States)

    Grosskortenhaus, Ruth; Sprenger, Frank

    2002-01-01

    We demonstrate that Rca1 is an essential inhibitor of the anaphase-promoting complex/cyclosome (APC) in Drosophila. APC activity is restricted to mitotic stages and G1 by its activators Cdc20-Fizzy (Cdc20(Fzy)) and Cdh1-Fizzy-related (Cdh1(Fzr)), respectively. In rca1 mutants, cyclins are degraded prematurely in G2 by APC-Cdh1(Fzr)-dependent proteolysis, and cells fail to execute mitosis. Overexpression of Cdh1(Fzr) mimics the rca1 phenotype, and coexpression of Rca1 blocks this Cdh1(Fzr) function. We show that Rca1 and Cdh1(Fzr) are in a complex that also includes the APC component Cdc27. Previous studies have shown that phosphorylation of Cdh1 prevents its interaction with the APC. Our data reveal a different mode of APC regulation by Rca1 at the G2 stage, when low Cdk activity is unable to inhibit Cdh1(Fzr) interaction.

  2. Environmental Pollution

    International Nuclear Information System (INIS)

    Won, Jong IK

    1990-03-01

    This book tells US that what nature is, which gives descriptions of the world of living things like the role of plant, order of the vegetable kingdom, the world of plant, destruction of the natural world, and the world of bugs, nature and human with man's survive and change of nature, environment and human, and in creasing population and environment, philosophy of conservation of nature on meaning, destroy and management, and direction, air pollution spot, water pollution, soil pollution conservation of nature and industry case of foreign country and view of environment and environmental assimilating capacity.

  3. 33 CFR 155.1130 - Requirements for prepositioned response equipment.

    Science.gov (United States)

    2010-07-01

    ... HOMELAND SECURITY (CONTINUED) POLLUTION OIL OR HAZARDOUS MATERIAL POLLUTION PREVENTION REGULATIONS FOR... sorbents; (3) Sorbents including booms, sweeps, pads, blankets, drums and plastic bags; (4) Personnel...

  4. Ozone Pollution

    Science.gov (United States)

    Known as tropospheric or ground-level ozone, this gas is harmful to human heath and the environment. Since it forms from emissions of volatile organic compounds (VOCs) and nitrogen oxides (NOx), these pollutants are regulated under air quality standards.

  5. Water Pollution

    Science.gov (United States)

    ... What is NIEHS Doing? Further Reading For Educators Introduction Water pollution is any contamination of water with ... NIEHS Newsletter) Karletta Chief Featured in Science Friday Film (April 2018) Chlorine Levels Help Detect Risk for ...

  6. Light Pollution

    Science.gov (United States)

    Riegel, Kurt W.

    1973-01-01

    Outdoor lighting is light pollution which handicaps certain astronomical programs. Protective measures must be adopted by the government to aid observational astronomy without sacrificing legitimate outdoor lighting needs. (PS)

  7. Air pollution

    International Nuclear Information System (INIS)

    Nelson, P.

    2000-01-01

    Australian cites experience a number of current and emerging air pollution problems. Concentrations of traditional primary pollutants such as CO, lead and dust have fallen in recent years as a consequence of air pollutant control measures, and the widespread introduction of lead-free petrol. However, recommended guidelines for ozone, the principal component of photochemical smog, are regularly exceeded in major capital cities in the summer months. In addition, it is predicted that extensive urban expansion will lead to much greater dependence on the motor vehicle as the primary means of transportation. Effects of air pollution are felt at a variety of scales. Traditionally, concerns about gaseous and particulate emissions from industrial and vehicular sources were focused on local impacts due to exposure to toxic species such as CO and lead. As noted above, concentrations of these pollutants have been reduced by a variety of control measures. Pollutants which have effects at a regional scale, such as photochemically-produced ozone, and acidic gases and particles have proved more difficult to reduce. In general, these pollutants arc not the result of direct emissions to atmosphere, but result from complex secondary processes driven by photochemical reactions of species such as NO 2 and aldehydes. In addition, global effects of gaseous and particulate emissions to the atmosphere have received significant recent attention, concentrations of atmospheric CO 2 with predicted impacts on global climate, and ozone depletion due to anthropogenic emissions of chlorine-containing chemicals are the two major examples. Combustion processes from petrol- and diesel-fuelled vehicles, make major contributions to air pollution, and the magnitude of this contribution is discussed in this article

  8. Environmental pollution

    International Nuclear Information System (INIS)

    Hanif, J.; Hanif, M.I.

    1997-01-01

    The third proceedings of National Symposium on Modern Trends in Contemporary Chemistry was held in Islamabad, Pakistan from February 24-26, 1997. In this symposium more than 220 scientists, engineers and technologist were registered from 11 universities, 17 research organisations and 8 non-governmental organisation including some commercial establishments. The symposium was divided into five technical sessions on hydro spheric pollution, atmospheric pollution, bio spheric pollution, lithospheric pollution and impact assessment and environmental education. Environmental and ecology are so interdependent that any change in the balance due to natural and man made cause may result in a disaster, flood, fire, earthquake, epidemic, population explosion etc. are the natural ways of unbalancing our ecosystem. The scope of this symposium includes: 1) Review the chemistry and the chemical techniques like polarography, coulometry, HPLC, GC-MS, NAA, XRF, AAS, AES etc. involved in the assessment monitoring and control of various pollutions. 2) Propose sampling, transportation, measurement and standardization procedures. 3) Collaboration in scientific data collection. 4) Mutual consultation for management of the pollution problem in a cost effective manner. 5) sharing knowledge and experience with various environmental protection groups both in public and private sector. (A.B.)

  9. Ground Pollution Science

    International Nuclear Information System (INIS)

    Oh, Jong Min; Bae, Jae Geun

    1997-08-01

    This book deals with ground pollution science and soil science, classification of soil and fundamentals, ground pollution and human, ground pollution and organic matter, ground pollution and city environment, environmental problems of the earth and ground pollution, soil pollution and development of geological features of the ground, ground pollution and landfill of waste, case of measurement of ground pollution.

  10. The effectiveness of neuromuscular warm-up strategies, that require no additional equipment, for preventing lower limb injuries during sports participation: a systematic review.

    Science.gov (United States)

    Herman, Katherine; Barton, Christian; Malliaras, Peter; Morrissey, Dylan

    2012-07-19

    Lower limb injuries in sport are increasingly prevalent and responsible for large economic as well as personal burdens. In this review we seek to determine which easily implemented functional neuromuscular warm-up strategies are effective in preventing lower limb injuries during sports participation and in which sporting groups they are effective. Seven electronic databases were searched from inception to January 2012 for studies investigating neuromuscular warm-up strategies and injury prevention. The quality of each included study was evaluated using a modified version of the van Tulder scale. Data were extracted from each study and used to calculate the risk of injury following application of each evaluated strategy. Nine studies were identified including six randomized controlled trials (RCT) and three controlled clinical trials (CCT). Heterogeneity in study design and warm-up strategies prevented pooling of results. Two studies investigated male and female participants, while the remaining seven investigated women only. Risk Ratio (RR) statistics indicated 'The 11+' prevention strategy significantly reduces overall (RR 0.67, confidence interval (CI) 0.54 to 0.84) and overuse (RR 0.45, CI 0.28 to 0.71) lower limb injuries as well as knee (RR 0.48, CI 0.32 to 0.72) injuries among young amateur female footballers. The 'Knee Injury Prevention Program' (KIPP) significantly reduced the risk of noncontact lower limb (RR 0.5, CI 0.33 to 0.76) and overuse (RR 0.44, CI 0.22 to 0.86) injuries in young amateur female football and basketball players. The 'Prevent Injury and Enhance Performance' (PEP) strategy reduces the incidence of anterior cruciate ligament (ACL) injuries (RR 0.18, CI 0.08 to 0.42). The 'HarmoKnee' programme reduces the risk of knee injuries (RR 0.22, CI 0.06 to 0.76) in teenage female footballers. The 'Anterior Knee Pain Prevention Training Programme' (AKP PTP) significantly reduces the incidence of anterior knee pain (RR 0.27, CI 0.14 to 0.54) in

  11. The effectiveness of neuromuscular warm-up strategies, that require no additional equipment, for preventing lower limb injuries during sports participation: a systematic review

    Directory of Open Access Journals (Sweden)

    Herman Katherine

    2012-07-01

    Full Text Available Abstract Background Lower limb injuries in sport are increasingly prevalent and responsible for large economic as well as personal burdens. In this review we seek to determine which easily implemented functional neuromuscular warm-up strategies are effective in preventing lower limb injuries during sports participation and in which sporting groups they are effective. Methods Seven electronic databases were searched from inception to January 2012 for studies investigating neuromuscular warm-up strategies and injury prevention. The quality of each included study was evaluated using a modified version of the van Tulder scale. Data were extracted from each study and used to calculate the risk of injury following application of each evaluated strategy. Results Nine studies were identified including six randomized controlled trials (RCT and three controlled clinical trials (CCT. Heterogeneity in study design and warm-up strategies prevented pooling of results. Two studies investigated male and female participants, while the remaining seven investigated women only. Risk Ratio (RR statistics indicated 'The 11+' prevention strategy significantly reduces overall (RR 0.67, confidence interval (CI 0.54 to 0.84 and overuse (RR 0.45, CI 0.28 to 0.71 lower limb injuries as well as knee (RR 0.48, CI 0.32 to 0.72 injuries among young amateur female footballers. The 'Knee Injury Prevention Program' (KIPP significantly reduced the risk of noncontact lower limb (RR 0.5, CI 0.33 to 0.76 and overuse (RR 0.44, CI 0.22 to 0.86 injuries in young amateur female football and basketball players. The 'Prevent Injury and Enhance Performance' (PEP strategy reduces the incidence of anterior cruciate ligament (ACL injuries (RR 0.18, CI 0.08 to 0.42. The 'HarmoKnee' programme reduces the risk of knee injuries (RR 0.22, CI 0.06 to 0.76 in teenage female footballers. The 'Anterior Knee Pain Prevention Training Programme' (AKP PTP significantly reduces the incidence of anterior

  12. Water Pollution Control Industry

    Science.gov (United States)

    Environmental Science and Technology, 1974

    1974-01-01

    A special report on the state of the water pollution control industry reveals that due to forthcoming federal requirements, sales and the backlogs should increase; problems may ensue because of shortages of materials and inflation. Included are reports from various individual companies. (MLB)

  13. Pollution problems plague Poland

    International Nuclear Information System (INIS)

    Bajsarowicz, J.F.

    1989-01-01

    Poland's environmental problems are said to stem from investments in heavy industries that require enormous quantities of power and from the exploitation of two key natural resources: coal and sulfur. Air and water pollution problems and related public health problems are discussed

  14. Prevention of air pollution: guidebook of the French techniques of dedusting and purification of gases and smokes in the industry; Prevention de la pollution de l'air: guide des techniques francaises de depoussierage et d'epuration des gaz et fumees dans l'industrie

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    This new edition favours the multi-pollutants approach and integrates the improvements made in the European standardization of emission measurements. It contributes to the diffusion of the French techniques in the domain of gases dedusting and purification. (J.S.)

  15. The Capability of Equisetum ramosissium and Typha angustifolia as Phytoremediation Agents to Reduce Nitrate-Phosphate Pollutants and Prevent Microcystis Blooming in Fresh Water Ecosystem

    Directory of Open Access Journals (Sweden)

    Viky Vidayanti

    2012-12-01

    Full Text Available The aim of this study is to find out the kind of hydromacrophyte composition having the highest capability to reduce nitrate-phosphate pollutant and Microcystis growth in phytoremediation media using Equisetum ramosissium, Typha angustifolia and the combination of both. Microcystis were obtained from Sutami reservoir, then being inoculated in a media grown by hydromacrophytes (E. ramosissium, T. angustifolia and both of the hydromacrophytes in the batch culture system. The number of Microcystis was counted every day within fifteen days. Abiotic factors were observe, including the concentration of nitrate using brucine-colorimetry method and orthophosphate (dissolved phosphate using stannous chloride-colorimetry method on day 0, 6th, 12th and 15th. The growth rate of Microcystis carrying capacity and orthophosphate-nitrate levels among treatments were analysed by ANOVA test. The results showed that E. ramosissium and T. angustifolia in mono and polyculture techniques had similar potentiality to reduce the nitrate and ortophosphate. The concentrations of nitrate and orthophosphate decreased over 70 % in the 6th day after incubation. All of the treatments were able to reduce the carrying capacity of Microcystis up to 46 % , but the growth rates were similar in all media, that is, around 97-170 cells/L/day.

  16. Drosophila Clock Is Required in Brain Pacemaker Neurons to Prevent Premature Locomotor Aging Independently of Its Circadian Function.

    Directory of Open Access Journals (Sweden)

    Alexandra Vaccaro

    2017-01-01

    Full Text Available Circadian clocks control many self-sustained rhythms in physiology and behavior with approximately 24-hour periodicity. In many organisms, oxidative stress and aging negatively impact the circadian system and sleep. Conversely, loss of the clock decreases resistance to oxidative stress, and may reduce lifespan and speed up brain aging and neurodegeneration. Here we examined the effects of clock disruptions on locomotor aging and longevity in Drosophila. We found that lifespan was similarly reduced in three arrhythmic mutants (ClkAR, cyc0 and tim0 and in wild-type flies under constant light, which stops the clock. In contrast, ClkAR mutants showed significantly faster age-related locomotor deficits (as monitored by startle-induced climbing than cyc0 and tim0, or than control flies under constant light. Reactive oxygen species accumulated more with age in ClkAR mutant brains, but this did not appear to contribute to the accelerated locomotor decline of the mutant. Clk, but not Cyc, inactivation by RNA interference in the pigment-dispersing factor (PDF-expressing central pacemaker neurons led to similar loss of climbing performance as ClkAR. Conversely, restoring Clk function in these cells was sufficient to rescue the ClkAR locomotor phenotype, independently of behavioral rhythmicity. Accelerated locomotor decline of the ClkAR mutant required expression of the PDF receptor and correlated to an apparent loss of dopaminergic neurons in the posterior protocerebral lateral 1 (PPL1 clusters. This neuronal loss was rescued when the ClkAR mutation was placed in an apoptosis-deficient background. Impairing dopamine synthesis in a single pair of PPL1 neurons that innervate the mushroom bodies accelerated locomotor decline in otherwise wild-type flies. Our results therefore reveal a novel circadian-independent requirement for Clk in brain circadian neurons to maintain a subset of dopaminergic cells and avoid premature locomotor aging in Drosophila.

  17. Design of a medical record review study on the incidence and preventability of adverse events requiring a higher level of care in Belgian hospitals

    Directory of Open Access Journals (Sweden)

    Vlayen Annemie

    2012-08-01

    Full Text Available Abstract Background Adverse events are unintended patient injuries that arise from healthcare management resulting in disability, prolonged hospital stay or death. Adverse events that require intensive care admission imply a considerable financial burden to the healthcare system. The epidemiology of adverse events in Belgian hospitals has never been assessed systematically. Findings A multistage retrospective review study of patients requiring a transfer to a higher level of care will be conducted in six hospitals in the province of Limburg. Patient records are reviewed starting from January 2012 by a clinical team consisting of a research nurse, a physician and a clinical pharmacist. Besides the incidence and the level of causation and preventability, also the type of adverse events and their consequences (patient harm, mortality and length of stay will be assessed. Moreover, the adequacy of the patient records and quality/usefulness of the method of medical record review will be evaluated. Discussion This paper describes the rationale for a retrospective review study of adverse events that necessitate a higher level of care. More specifically, we are particularly interested in increasing our understanding in the preventability and root causes of these events in order to implement improvement strategies. Attention is paid to the strengths and limitations of the study design.

  18. Environmental management maturity of local and multinational high-technology corporations located in Brazil: the role of business internationalization in pollution prevention

    Directory of Open Access Journals (Sweden)

    Giovanna Maialle

    2016-06-01

    Full Text Available Abstract This paper identifies and characterizes the environmental maturity level of local and multinational high-technology corporations located in Brazil. This characterization is achieved by discussing the adoption of environmental management practices and considering aspects of the productive process stage. An eight-case study was conducted through data triangulation using interviews with employees in diverse organizational areas, direct observations and secondary data. The results indicate the differences in environmental positioning among the studied corporations with a predominance of preventive practices, i.e., an emphasis on eco-efficiency and compliance with legislation. It was also noted that environmental concerns in the corporations are related to internationalization and, in some cases, to the pressure exerted by corporations that represent the brand of the products produced in Brazil. Moreover, the adoption of environmental practices based on the productive process stage supported the environmental maturity classifications of the studied companies.

  19. National Emission Standards for Aerospace Manufacturing and Rework Facilities: Summary of Requirements for Implementing the National Emission Standards for Hazardous Air Pollutants (NESHAP)

    Science.gov (United States)

    This summary of implementation requirements document for the Aerospace Manufacturing and Rework facilties NESHAP was originally prepared in August 1997, but it was updated in January 2001 with a new amendments update.

  20. Proposed Rule for Control of Air Pollution From New Motor Vehicles: Proposed Heavy-Duty Engine and Vehicle Standards and Highway Diesel Fuel Sulfur Control Requirements

    Science.gov (United States)

    Rule summary, CFR citations and additional resources concerning proposed new emission standards that will begin to take effect in 2007 and corresponding diesel fuel requirements that take effect in 2006.