WorldWideScience

Sample records for polish state insights

  1. Polish Qualitative Sociology. Insight into the future of postdisciplinary research

    OpenAIRE

    Konecki, Krzysztof

    2014-01-01

    The paper desctibes the definitions of following concepts: multidisiplinarity, interdisciplinarity, transdysciplinarity, postdisciplinarity. MOreover it discuss the meanings of a concept of discipline. It describes the place of the Polish qualitative sociology in the context of postdisciplinary research. The main question of paper is: Does the POlish Qualitative Sociology has entered the postdisciplinary phase of research? DGS, UL Krzysztof Konecki

  2. Heavy metals balance in Polish and Dutch agronomy : Actual state and previsions for the future

    NARCIS (Netherlands)

    Dach, J.; Starmans, D.A.J.

    2005-01-01

    This paper presents the state of agro-ecosystem contamination with heavy metals in relation to the level of agricultural development. For this, the Polish and Dutch agricultural situations were compared. The intensive animal and vegetable production observed in the Netherlands over the past 20-30

  3. Math Anxiety Assessment with the Abbreviated Math Anxiety Scale: Applicability and usefulness: insights from the Polish adaptation

    Directory of Open Access Journals (Sweden)

    Krzysztof eCipora

    2015-11-01

    Full Text Available Math anxiety has an important impact on mathematical development and performance. However, although math anxiety is supposed to be a transcultural trait, assessment instruments are scarce and are validated mainly for Western cultures so far. Therefore, we aimed at examining the transcultural generality of math anxiety by a thorough investigation of the validity of math anxiety assessment in Eastern Europe. We investigated the validity and reliability of a Polish adaptation of the Abbreviated Math Anxiety Scale (AMAS, known to have very good psychometric characteristics in its original, American-English version as well as in its Italian and Iranian adaptations.We also observed high reliability, both for internal consistency and test-retest stability of the AMAS in the Polish sample. The results also show very good construct, convergent and discriminant validity: The factorial structure in Polish adult participants (n = 857 was very similar to the one previously found in other samples; AMAS scores correlated moderately in expected directions with state and trait anxiety, self-assessed math achievement and skill as well temperamental traits of emotional reactivity, briskness, endurance and perseverance. Average scores obtained by participants as well as gender differences and correlations with external measures were also similar across cultures. Beyond the cultural comparison, we used path model analyses to show that math anxiety relates to math grades and self-competence when controlling for trait anxiety.The current study shows transcultural validity of math anxiety assessment with the AMAS.

  4. Math Anxiety Assessment with the Abbreviated Math Anxiety Scale: Applicability and Usefulness: Insights from the Polish Adaptation.

    Science.gov (United States)

    Cipora, Krzysztof; Szczygieł, Monika; Willmes, Klaus; Nuerk, Hans-Christoph

    2015-01-01

    Math anxiety has an important impact on mathematical development and performance. However, although math anxiety is supposed to be a transcultural trait, assessment instruments are scarce and are validated mainly for Western cultures so far. Therefore, we aimed at examining the transcultural generality of math anxiety by a thorough investigation of the validity of math anxiety assessment in Eastern Europe. We investigated the validity and reliability of a Polish adaptation of the Abbreviated Math Anxiety Scale (AMAS), known to have very good psychometric characteristics in its original, American-English version as well as in its Italian and Iranian adaptations. We also observed high reliability, both for internal consistency and test-retest stability of the AMAS in the Polish sample. The results also show very good construct, convergent and discriminant validity: The factorial structure in Polish adult participants (n = 857) was very similar to the one previously found in other samples; AMAS scores correlated moderately in expected directions with state and trait anxiety, self-assessed math achievement and skill as well temperamental traits of emotional reactivity, briskness, endurance, and perseverance. Average scores obtained by participants as well as gender differences and correlations with external measures were also similar across cultures. Beyond the cultural comparison, we used path model analyses to show that math anxiety relates to math grades and self-competence when controlling for trait anxiety. The current study shows transcultural validity of math anxiety assessment with the AMAS.

  5. Strategic Orientation and Organisational Culture in Polish Public Organisations: Insights from the Miles and Snow Typology

    Directory of Open Access Journals (Sweden)

    Wronka-Pośpiech Martyna

    2016-05-01

    Full Text Available Polish public organisations are often perceived as having strong bureaucratic orientation, avoiding both change and risk. However, in the last decade a distinct change in the management model of public organisations can be noticed. Public sector becomes an open ground for mergers and partnerships, entrepreneurial leadership, diversified services and commercialization (Golensky and DeRuiter 1999; Zimmerman and Dart, 1998; Pollitt and Bouckaert, 2004; Walker, 2013]. Public organisations embrace these strategies from the for-profit sector in order to manage change and to be effective. Most importantly, public organisations are adopting these frameworks in order to survive the changing operating environment, including changes in the level of government funding. Our paper draws on the Miles and Snow (1978 typology of generic strategies - prospectors, defenders, analysers, and reactors - to identify different organisational strategies within public organisations providing social services in Poland. In order to assess organisational culture we used the most widespread and used in many empirical studies Cameron and Quinn’s model (2003, the Competing Values Framework (CVF, from which four cultures - adhocracy, clan, market and hierarchy - emerge. The choice of these two providers of social services was dictated by our conviction, that these organisations are critical both for the national economy and for mitigating, counteracting and preventing social exclusion.

  6. Polish visit

    CERN Document Server

    2003-01-01

    On 6 October, Professor Michal Kleiber, Polish Minister of Science and Chairman of the State Committee for Scientific Research, visited CERN and met both the current and designated Director General, Luciano Maiani and Robert Aymar. Professor Kleiber visited the CMS and ATLAS detector assembly halls, the underground cavern for ATLAS, and the LHC superconducting magnet string test hall. Michal Kleiber (left), Polish minister of science and Jan Krolikowski, scientist at Warsaw University and working for CMS, who shows the prototypes of the Muon Trigger board of CMS.

  7. Polishing of silicon based advanced ceramics

    Science.gov (United States)

    Klocke, Fritz; Dambon, Olaf; Zunke, Richard; Waechter, D.

    2009-05-01

    Silicon based advanced ceramics show advantages in comparison to other materials due to their extreme hardness, wear and creep resistance, low density and low coefficient of thermal expansion. As a matter of course, machining requires high efforts. In order to reach demanded low roughness for optical or tribological applications a defect free surface is indispensable. In this paper, polishing of silicon nitride and silicon carbide is investigated. The objective is to elaborate scientific understanding of the process interactions. Based on this knowledge, the optimization of removal rate, surface quality and form accuracy can be realized. For this purpose, fundamental investigations of polishing silicon based ceramics are undertaken and evaluated. Former scientific publications discuss removal mechanisms and wear behavior, but the scientific insight is mainly based on investigations in grinding and lapping. The removal mechanisms in polishing are not fully understood due to complexity of interactions. The role of, e.g., process parameters, slurry and abrasives, and their influence on the output parameters is still uncertain. Extensive technological investigations demonstrate the influence of the polishing system and the machining parameters on the stability and the reproducibility. It is shown that the interactions between the advanced ceramics and the polishing systems is of great relevance. Depending on the kind of slurry and polishing agent the material removal mechanisms differ. The observed effects can be explained by dominating mechanical or chemo-mechanical removal mechanisms. Therefore, hypotheses to state adequate explanations are presented and validated by advanced metrology devices, such as SEM, AFM and TEM.

  8. The relationship between insight and psychosis in state patients with ...

    African Journals Online (AJOL)

    Objective. State patients committed under the Mental Health Act must have insight into their illness and the crime they committed before they can be discharged. Patients with schizophrenia are described as having poor insight into the nature and severity of their disorder. Various factors influence insight, and in some studies ...

  9. Geodynamics of the Carpathian-Pannonian region: Insights from low temperature thermochronology of the Polish and Ukrainian Carpathians

    Science.gov (United States)

    Andreucci, Benedetta; Zattin, Massimiliano; Castelluccio, Ada; Mazzoli, Stefano; Szaniawski, Rafal; Jankowski, Leszek

    2013-04-01

    In recent years, the geodynamic evolution of the Carpathian-Pannonian region has been the subject of a heated scientific debate. This orogenic system formed between the Late Jurassic and the Neogene by the collision of the Alcapa and Tisza-Dacia microplates with the European Platform, and assumed its present-day configuration mainly during the Miocene, when the extensional Pannonian Basin formed in a retro wedge position, while compression was still active along the Carpathian front. The most common and widely accepted interpretation for the Miocene evolution of this region is based on a classical back-arc extension model and subsequent astenospheric upwelling and slab break-off. Nonetheless several authors proposed other possible driving mechanisms for the formation of the Pannonian Basin, such as lithosphere delamination or lithospheric gravitational instability. Thermochronometry provides important constrains to the depths of burial and to the timing and rates of exhumation. Each geodynamic scenario proposed for the Carpathian-Pannonian region implies a different spatial distribution of burial and a different timing of exhumation. In this work we use a compilation of several low-temperature thermochronometric datasets, referred to the Polish and Ukrainian Carpathians, to evaluate their compatibility with the different geodynamic models proposed so far. In order to achieve this goal we examine the spatial distribution of burial depths and of ages and rates of exhumation and we put them in relation with (i) the spatial trend of the relief, (ii) heat flow, (iii) crustal and lithospheric thickness, and (iv) structural setting. We propose a subdivision of the Polish and Ukrainian Carpathians in three different tectonic domains, based on geophysical and structural parameters. Each single area is characterized also by different burial-exhumation history and requires a specific explanation in terms of driving processes. In particular, we infer that exhumation occurred

  10. Impaired insight into illness and cognitive insight in schizophrenia spectrum disorders: Resting state functional connectivity

    Science.gov (United States)

    Gerretsen, Philip; Menon, Mahesh; Mamo, David C.; Fervaha, Gagan; Remington, Gary; Pollock, Bruce G.; Graff-Guerrero, Ariel

    2015-01-01

    Background Impaired insight into illness (clinical insight) in schizophrenia has negative effects on treatment adherence and clinical outcomes. Schizophrenia is described as a disorder of disrupted brain connectivity. In line with this concept, resting state networks (RSNs) appear differentially affected in persons with schizophrenia. Therefore, impaired clinical, or the related construct of cognitive insight (which posits that impaired clinical insight is a function of metacognitive deficits), may reflect alterations in RSN functional connectivity (fc). Based on our previous research, which showed that impaired insight into illness was associated with increased left hemisphere volume relative to right, we hypothesized that impaired clinical insight would be associated with increased connectivity in the DMN with specific left hemisphere brain regions. Methods Resting state MRI scans were acquired for participants with schizophrenia or schizoaffective disorder (n = 20). Seed-to-voxel and ROI-to-ROI fc analyses were performed using the CONN-fMRI fc toolbox v13 for established RSNs. Clinical and cognitive insight were measured with the Schedule for the Assessment of Insight—Expanded Version and Beck Cognitive Insight Scale, respectively, and included as the regressors in fc analyses. Results As hypothesized, impaired clinical insight was associated with increased connectivity in the default mode network (DMN) with the left angular gyrus, and also in the self-referential network (SRN) with the left insula. Cognitive insight was associated with increased connectivity in the dorsal attention network (DAN) with the right inferior frontal cortex (IFC) and left anterior cingulate cortex (ACC). Conclusion Increased connectivity in DMN and SRN with the left angular gyrus and insula, respectively, may represent neural correlates of impaired clinical insight in schizophrenia spectrum disorders, and is consistent with the literature attributing impaired insight to left

  11. Tooth polishing: The current status

    Directory of Open Access Journals (Sweden)

    Madhuri Alankar Sawai

    2015-01-01

    Full Text Available Healthy teeth and gums make a person feel confident and fit. As people go about their daily routines and with different eating and drinking habits, the tooth enamel turns yellowish or gets stained. Polishing traditionally has been associated with the prophylaxis procedure in most dental practices, which patients know and expect. However, with overzealous use of polishing procedure, there is wearing of the superficial tooth structure. This would lead to more accumulation of local deposits. Also, it takes a long time for the formation of the fluoride-rich layer of the tooth again. Hence, now-a-days, polishing is not advised as a part of routine oral prophylaxis procedure but is done selectively based on the patients′ need. The article here, gives an insight on the different aspects of the polishing process along with the different methods and agents used for the same.

  12. STUDY OF THE EFFECT OF ENDFACES POLISHING ANGLE FOR ANISOTROPIC WAVEGUIDES ON STATE CONVERSION OF LIGHT POLARIZATION

    Directory of Open Access Journals (Sweden)

    V. A. Shulepov

    2016-05-01

    Full Text Available The paper deals with optical scheme for research of polarization state transformation at the junction of anisotropic waveguides. It consists of a light source, polarization controller, multifunctional integrated optical scheme (MIOS, single-mode fiber for input and output of optical radiation in MIOS and the polarization scanning Michelson interferometer. Optical radiation from the source of the plant comes through the polarization controller in one of the MIOS ports. Further, in one of the opposite ports the radiation is received by different fibers, polished at the angles of 19.5˚, 10.5˚ and 0˚. After that, the optical radiation gets into polarization Michelson interferometer. With that, the picture visibility is analyzed at different displacement of one arm upon which the value has been determined in the polarization conversion point connections. At the course of work it was obtained that the polarization state conversion at a splicing point rises with the slant angle deviation from its optimal value. Anisotropic waveguides splicing is one of the main tasks during fabrication of any fiber-optic sensor with integrated optical elements. The results of this work are of great interest for the wide range of specialists in the optical waveguides application field.

  13. Heritage of Stanisław Ostrowski - the only one medical doctor who became state Polish President - Patriae Semper Fidelis.

    Science.gov (United States)

    Woltanowska, Martyna; Woltanowski, Piotr; Wincewicz, Andrzej; Woltanowska, Magdalena

    2018-01-01

    Our purpose was to write a biography of Stanisław Ostrowski that would address in the first place the medical aspect of his professional life, with a comprehensive approach of others fields of his activity. We essentially grounded the paper on primary resources that were papers authored by Ostrowski including his scientific publications, memories, speeches as well as contemporaneous official documents that referred to Ostrowski. Second resources were also used to double check some data from primary resources and to place the biography of Stanisław Ostrowski in a proper background with special care to social, professional and political context. In this study, second resources comprised papers, that were prepared after the death of Stanisław Ostrowski. Stanisław Ostrowski, MD was a meticulous military medical doctor with an academic engagement at the King John Casimir University of Lvov. In addition, he was an excellent organizer, who soon got involved in politics to serve the local community with essential projects in public health particularly anti-tuberculosis campaigns in Lvov district. His quiet and proficient nature made him an ideal statesman with incredible skills to reconcile social, national and political enemies. Ostrowski was elected a member of parliament three times. He also held the position of President of the city of Lvov until World War Two. During the war, he was imprisoned and deported to Siberia, Soviet Union, in years 1939-1941. Subsequently he fought against Nazi Germans in the Polish II Corps. Ostrowski survived the war providing medical service in the various military units. Afterwards, he ran his medical practice in the UK. Stanisław Ostrowski was the only dermatologist who became a state president. He held an office of state president of the Polish Republic on exile in London. His life is not a simple story, but a great lesson that provides clear guidelines how to find a stable ground for lifetime being a medical doctor in the

  14. Radon in the air in the Millenium of the Polish State Underground Tourist Route in Klodzko (Lower Silesia, PL)

    International Nuclear Information System (INIS)

    Przylibski, T.A.

    1998-01-01

    The paper presents results of measurements of average monthly radon concentrations in drifts of the Millenium of the Polish State Underground Tourist Route in Klodzko. The studies revealed no significant seasonal fluctuations of radon concentration. Constant influx of radon from the geological basement, and most of all from loess-like loams and rhyolite inliers, is compensated by a natural ventilation system. Only in the summer periods of elevated radon concentrations in the air of the drifts and chambers of the Route can occur. In individual sections it is possible to measure occasional higher radon concentrations caused by local air flow fluctuations in the drifts. The highest concentrations were measured in places with the poorest ventilation - blind drifts ventilated only by backward currents. The average radon concentrations measured do not exceed concentrations allowed in apartment buildings. Therefore, in the Route there is no risk of exposure to excessive amounts of radon for personnel and tourists. The results obtained in the Route's drifts may be compared with minimum results expected in basements of houses in the Old Town in Klodzko. The paper stresses also a role of natural ventilation in protection of underground constructions and apartment buildings against high radon concentrations in areas of its elevated emanations from the geological basement. (author)

  15. The Relation of Rapid Changes in Obesity Measures to Lipid Profile - Insights from a Nationwide Metabolic Health Survey in 444 Polish Cities

    Science.gov (United States)

    Kaess, Bernhard M.; Jóźwiak, Jacek; Nelson, Christopher P.; Lukas, Witold; Mastej, Mirosław; Windak, Adam; Tomasik, Tomasz; Grzeszczak, Władysław; Tykarski, Andrzej; Gąsowski, Jerzy; Ślęzak-Prochazka, Izabella; Ślęzak, Andrzej; Charchar, Fadi J.; Sattar, Naveed; Thompson, John R.; Samani, Nilesh J.; Tomaszewski, Maciej

    2014-01-01

    Objective The impact of fast changes in obesity indices on other measures of metabolic health is poorly defined in the general population. Using the Polish accession to the European Union as a model of political and social transformation we examined how an expected rapid increase in body mass index (BMI) and waist circumference relates to changes in lipid profile, both at the population and personal level. Methods Through primary care centres in 444 Polish cities, two cross-sectional nationwide population-based surveys (LIPIDOGRAM 2004 and LIPIDOGRAM 2006) examined 15,404 and 15,453 adult individuals in 2004 and 2006, respectively. A separate prospective sample of 1,840 individuals recruited in 2004 had a follow-up in 2006 (LIPIDOGRAM PLUS). Results Two years after Polish accession to European Union, mean population BMI and waist circumference increased by 0.6% and 0.9%, respectively. This tracked with a 7.6% drop in HDL-cholesterol and a 2.1% increase in triglycerides (all p<0.001) nationwide. The direction and magnitude of the population changes were replicated at the personal level in LIPIDOGRAM PLUS (0.7%, 0.3%, 8.6% and 1.8%, respectively). However, increases in BMI and waist circumference were both only weakly associated with HDL-cholesterol and triglycerides changes prospectively. The relation of BMI to the magnitude of change in both lipid fractions was comparable to that of waist circumference. Conclusions Moderate changes in obesity measures tracked with a significant deterioration in measures of pro-atherogenic dyslipidaemia at both personal and population level. These associations were predominantly driven by factors not measureable directly through either BMI or waist circumference. PMID:24497983

  16. Polish-Bulgarian-Russian, Bulgarian-Polish-Russian or Russian-Bulgarian-Polish dictionary?

    Directory of Open Access Journals (Sweden)

    Violetta Koseska-Toszewa

    2015-11-01

    Full Text Available Polish-Bulgarian-Russian, Bulgarian-Polish-Russian or Russian-Bulgarian-Polish dictionary? The trilingual dictionary (M. Duszkin, V. Koseska, J. Satoła and A. Tzoneva is being elaborated based on a working Polish-Bulgarian-Russian electronic parallel corpus authored by Maksim Duszkin, Violetta Koseska-Toszewa and Joanna Satoła-Staśkowiak, and works by A. Tzoneva. It is the first corpus comparing languages belonging to three different Slavic language groups: western, southern and eastern. Works on the dictionary are based on Gramatyka konfrontatywna bułgarsko-polska (Bulgarian-Polish confrontative grammar and the proposed there semantic-oriented interlanguage. Two types of classifiers have been introduced into the dictionary: classic and semantic. The trilingual dictionary will present a consistent and homogeneous set of facts of grammar and semantics. The Authors point out that in a traditional dictionary it is not clear for example whether aspect should be understood as imperfective / perfective form of a verb or as its meaning. Therefore in the dictionary forms and meaning are separated in a regular way. Imperfective verb form has two meanings: state and configuration of states and events culminating in state. Also perfective verb form has two meanings: event and configuration of states and events culminating in event. These meanings are described by the semantic classifiers, respectively, state and event, state1 and event1. The way of describing language units, mentioned in the article, gives a possibility to present language material (Polish, Bulgarian, Russian in any required order, hence the article’s title.

  17. Polish Industry and Art at CERN

    CERN Multimedia

    2000-01-01

    On 17 October 2000 the second Polish industrial and technological exhibition opened at CERN. The first one was held five years ago and nine of the companies that were present then have come back again this year. Six of those companies were awarded contracts with CERN in 1995. Three Polish officials were present at the Opening Ceremony today: Mrs Malgorzata Kozlowska, Under-secretary of State in the State Committee for Scientific Research, Mr Henryk Ogryczak, Under-secretary of State in Ministry of Economy and Prof. Jerzy Niewodniczanski, President of National Atomic Energy Agency. Professor Luciano Maiani welcomed the Polish delegation to CERN and stressed the important contribution of Polish scientists and industrialists to the work of the laboratory. Director General Luciano Maiani (back left) and head of SPL division Karl-Heinz Kissler (back right) visit the Poland at CERN exhibition… The exhibition offers Polish companies the opportunity to establish professional contacts with CERN. Nineteen companies...

  18. Functional Median Polish

    KAUST Repository

    Sun, Ying; Genton, Marc G.

    2012-01-01

    polish is demonstrated by comparing its performance with the traditional functional ANOVA fitted by means under different outlier models in simulation studies. The functional median polish is illustrated on various applications in climate science

  19. Cancer morbidity among polishers.

    Science.gov (United States)

    Järvholm, B; Thiringer, G; Axelson, O

    1982-01-01

    The mortality pattern among 86 men was determined to investigate the possible hazards of polishing steel. The men had polished steel with polishing paste for at least five years. The polishing pastes had contained tallow, beeswax, carnauba wax, alundum, carborundum, ferric oxide, and chalk. A total of 18 men had died compared with 13.3 expected. Four had died of stomach cancer compared with 0.44 expected (p less than 0.005). The mortality for other causes of death was not increased. The study does not permit any definite conclusion but indicates a possible cancer hazard among polishers. PMID:7066237

  20. Modeling surface topography of state-of-the-art x-ray mirrors as a result of stochastic polishing process: recent developments

    Science.gov (United States)

    Yashchuk, Valeriy V.; Centers, Gary; Tyurin, Yuri N.; Tyurina, Anastasia

    2016-09-01

    Recently, an original method for the statistical modeling of surface topography of state-of-the-art mirrors for usage in xray optical systems at light source facilities and for astronomical telescopes [Opt. Eng. 51(4), 046501, 2012; ibid. 53(8), 084102 (2014); and ibid. 55(7), 074106 (2016)] has been developed. In modeling, the mirror surface topography is considered to be a result of a stationary uniform stochastic polishing process and the best fit time-invariant linear filter (TILF) that optimally parameterizes, with limited number of parameters, the polishing process is determined. The TILF model allows the surface slope profile of an optic with a newly desired specification to be reliably forecast before fabrication. With the forecast data, representative numerical evaluations of expected performance of the prospective mirrors in optical systems under development become possible [Opt. Eng., 54(2), 025108 (2015)]. Here, we suggest and demonstrate an analytical approach for accounting the imperfections of the used metrology instruments, which are described by the instrumental point spread function, in the TILF modeling. The efficacy of the approach is demonstrated with numerical simulations for correction of measurements performed with an autocollimator based surface slope profiler. Besides solving this major metrological problem, the results of the present work open an avenue for developing analytical and computational tools for stitching data in the statistical domain, obtained using multiple metrology instruments measuring significantly different bandwidths of spatial wavelengths.

  1. the relationship between insight and psychosis in state patients with ...

    African Journals Online (AJOL)

    understanding of problems and personality traits as applied to the self, but also an ... between insight scores and the severity of the mental disorder were measured. ..... namely psychopathology (for instance paranoia, hostility, perplexity and ...

  2. Longitudinal and cross-sectional changes with age in selected anthropometric and physiological traits in hospitalized adults: an insight from the Polish Longitudinal Study of Aging (PLSA

    Directory of Open Access Journals (Sweden)

    Chmielewski Piotr

    2015-12-01

    Full Text Available Longitudinal studies of aging concerning individuals with comparable lifestyle, diet, health profile, socioeconomic status, and income remain extraordinarily rare. The purposes of our ongoing project are as follows: (i to collect extensive data on biological and medical aspects of aging in the Polish population, (ii to determine factors affecting the rate and course of aging, (iii to understand how aging unfolds as a dynamic and malleable process in ontogeny, and (iv to find novel predictors of longevity. Our investigation followed 142 physically healthy asylum inmates, including 68 males and 74 females, for at least 25 years from the age of 45 years onward. Cross-sectional assessment involved 225 inmates, including 113 males and 112 females. All the patients lived for a very long time under similar and good environmental conditions at the hospital in Cibórz, Lubuskie Province. They maintained virtually the same daily schedule and lifestyle. The rate and direction of changes with age in selected anthropometric and physiological traits were determined using ANOVA, t-test, and regression analysis. There were sex differences in the rate and pattern of age-related changes in certain characteristics such as relative weight, red blood cell count, monocyte count, thymol turbidity value, systolic blood pressure, and body temperature. Body weight, the body mass index (BMI, and total bilirubin level increased with advancing age, while body height decreased with age in both sexes. In conclusion, the aging process was associated with many regressive alterations in biological traits in both sexes but the rate and pattern of these changes depended on biological factors such as age and sex. There were only few characteristics which did not change significantly during the period under study. On the basis of comparison between the pattern of longitudinal changes with aging and the pattern of cross-sectional changes with age in the analyzed traits, we were able

  3. Etymology in the Polish Academy of Sciences Great Dictionary of ...

    African Journals Online (AJOL)

    The article offers an insight into etymological information provided in the Polish Academy of Sciences Great Dictionary of Polish (Pol. Wielki słownik języka polskiego PAN, WSJP PAN). The dictionary and the rules of producing the entries are briefly presented. These rules influence the way of working on etymology within ...

  4. Crimean Khanate, Polish-Lithuanian Commonwealth and Russian State in 1524–1571: The Diplomatic Correspondence from the Archive of the Grand Duchy of Lithuania

    Directory of Open Access Journals (Sweden)

    Erusalimskiy K.Yu.

    2017-12-01

    Full Text Available The manuscript of the Czartoryskis’ Library in Krakow № 2893 contains, among other sources, the correspondence of the Crimean-Kazan Gireys with the kings of Polish Crown and Grand Duchy of Lithuania in Ruthenian translation (“prosta mowa”. The collection of letters springs from the Radziwills’ archive and can be dated back to 1524–1571 based on the reasons outlined in this article. The manuscript from the Warsaw Main Archive of the Ancient Acts (Radziwills coll., part II, № 3294 contains a part of the same correspondence, which is present in the Czartoryski manuscript № 2893. The author reinterprets the historical context of the Warsaw manuscript. The senders of the letters are Sahib-Giray (to Sigismund I, 1st: ca. 1521–1524, 2nd: June–July 1530, 3rd: September–October 1537, Safa-Giray (two letters to Sigismund I, spring or summer of 1524, Amin-Giray-Saltan (a letter to Sigismund I, September–October 1537 and Poland’s King Sigismund I the Old (to Khan Sahib-Giray at end of December 1537 or the beginning of January 1538. The latest-dated part of the Polish-Lithuanian and Crimean-Kazan correspondence in the Czartoryski manuscript contains the materials of Devlet-Giray’s diplomatic correspondence with Sigismund II Augustus, which sheds a new light on the Crimean march against the Muscovite state in 1571. These materials are contextualized and studied with respect to the new information they may provide on the history of Russian-Crimean relations (letter to Sigismund II ca. April 5, 1571 and Ardy-Berdey’s embassy ca. July 5, 1571. The author found a list of 27 towns devastated by the khan during the war against Moscow recorded in the embassy accounts of the Polish Royal Treasury at the Warsaw Archive. It was composed as a means of propaganda, but it reflects the marching route of the Crimean troops to Moscow and the ravaging of other Russian districts after Moscow had been burned on May 24, 1574.

  5. Health Information in Polish (polski)

    Science.gov (United States)

    ... Tools You Are Here: Home → Multiple Languages → Polish (polski) URL of this page: https://medlineplus.gov/languages/polish.html Health Information in Polish (polski) To use the sharing features on this page, ...

  6. Polish Cartographical Review

    Directory of Open Access Journals (Sweden)

    Nedjeljko Frančula

    2017-07-01

    Full Text Available The Polish Cartographical Review (PCR journal has been published in English four times a year since 2015. The journal is in open access and it is published by De Gruyter Open. It is edited by Polish scientists in collaboration with international experts.

  7. Polish polar research (outline

    Directory of Open Access Journals (Sweden)

    Krzysztof Ludwik Birkenmajer

    2017-12-01

    Full Text Available The article describes Polish research and discoveries in the Arctic and the Antarctic since the 19th century. The author is a geologist and since 1956 has been engaged in scientific field research on Spitsbergen, Greenland and Antarctica (23 expeditions. For many years chairman of the Committee on Polar Research of the Polish Academy of Sciences, he is now its Honorary Chairman.

  8. Insight on the energy in the United States

    International Nuclear Information System (INIS)

    Jamet, Ph.

    2006-11-01

    This document recapitulates the main characteristics and the key data of the energy in the United States (fossil energies, renewable energies, electric power production). The main american strategies are then described as the actions at the international scale during the last five years. The main data of the research programs in the energy domain are presented and the possible consequences of the government change at the Congress are analyzed. (A.L.B.)

  9. 23 February 2010 - Polish Under Secretary of State, Ministry of Science and Higher Education, J. Szwed visiting CERN installations with sLHC Project Office T. Kurtyka and Machine Protection and Electrical Integrity Group Leader A. Siemko.

    CERN Multimedia

    Michel Blanc

    2010-01-01

    Tirage 1002023-01: In LHCb experimental area with Machine Protection and Electrical Integrity Group Leader A. Siemko; Mission Counselor M. Cichucka; Counselor to the Minister M. Klimkiewicz, Under Secretary of State J. Szwed; LHCb Collaboration, national group leader, Henryk Niewodniczanski Institut of Nuclear Physics G. Polok, Collaboration Spokesperson A. Golutvin and Delegate to CERN Council A. Zalewska. Tirage 28: Visiting the Computing Centre with IT Department Head F. Hemmer Tirage 49: In CMS Control centre, buiding 354 with Collaboration Spokesperson G. Tonelli and CMS Collaboration, national group leader, University of Warsaw J. Krolikowski. Tirage 62: visiting ALICE exhibition area and counting room with Collaboration Spokesperson J. Schukraft. Tirage 82-99: Under Secretary of State address to the Polish Community Tirage 82: Machine Protection and Electrical Integrity Group Leader A. Siemko Tirage 83: Polish Delegate to CERN Council A. Zalewska. Tirage 85: Directorate Office E. Rondio Tirage 86: ATLA...

  10. Functional Median Polish

    KAUST Repository

    Sun, Ying

    2012-08-03

    This article proposes functional median polish, an extension of univariate median polish, for one-way and two-way functional analysis of variance (ANOVA). The functional median polish estimates the functional grand effect and functional main factor effects based on functional medians in an additive functional ANOVA model assuming no interaction among factors. A functional rank test is used to assess whether the functional main factor effects are significant. The robustness of the functional median polish is demonstrated by comparing its performance with the traditional functional ANOVA fitted by means under different outlier models in simulation studies. The functional median polish is illustrated on various applications in climate science, including one-way and two-way ANOVA when functional data are either curves or images. Specifically, Canadian temperature data, U. S. precipitation observations and outputs of global and regional climate models are considered, which can facilitate the research on the close link between local climate and the occurrence or severity of some diseases and other threats to human health. © 2012 International Biometric Society.

  11. Building Capacity for Tracking Human Capital Development and Its Mobility across State Lines. Policy Insights

    Science.gov (United States)

    Prescott, Brian T.

    2014-01-01

    This issue of "Policy Insights" provides a review of the past five years of the cost and value of higher education, which have gained increased policymaker, consumer, and media attention. The Western Interstate Commission for Higher Education (WICHE) has worked with four of its member states (Hawai'i, Idaho, Oregon, and Washington) to…

  12. Polish Toxic Currency Options

    Directory of Open Access Journals (Sweden)

    Waldemar Gontarski

    2009-06-01

    Full Text Available Toxic currency options are defined on the basis of the opposition to the nature (essence of an option contract, which is justified in terms of norms founded on the general law clause of characteristics (nature of a relation (which represents an independent premise for imposing restrictions on the freedom of contracts. So-understood toxic currency options are unlawful. Indeed they contravene iuris cogentis regulations. These include for instance option contracts, which are concluded with a bank, if the bank has not informed about option risk before concluding the contract; or the barrier options, which focus only on the protection of bank’s interests. Therefore, such options may appear to be invalid. Therefore, performing contracts for toxic currency options may be qualified as a criminal mismanagement. For the sake of security, the manager should then take into consideration filing a claim for stating invalidity (which can be made in a court verdict. At the same time, if the supervisory board member in a commercial company, who can also be a subject to mismanagement offences, commits an omission involving lack of reaction (for example, if he/she fails to notify of the suspected offence committed by the management board members acting to the company’s detriment when the management board makes the company conclude option contracts which are charged with absolute invalidity the supervisory board member so acting may be considered to act to the company’s detriment. In the most recent Polish jurisprudence and judicature the standard of a “good host” is treated to be the last resort for determining whether the manager’s powers resulting from criminal regulations were performed. The manager of the exporter should not, as a rule, issue any options. Issuing options always means assuming an obligation. In the case of currency put options it is an absolute obligation to purchase a given amount in euro at exchange rate set in advance. On the

  13. Polish Higher Education: Intersectoral Distinctiveness

    Science.gov (United States)

    Musial, Joanna

    2014-01-01

    This study analyzes degrees of differences between the private and public sectors of Polish higher education. It finds them to be strong: Polish private institutions function very differently from Polish public institutions and these differences correspond with those found in the literature on higher education elsewhere in the world. Polish…

  14. Polish Semantic Parser

    Directory of Open Access Journals (Sweden)

    Agnieszka Grudzinska

    2000-01-01

    Full Text Available Amount of information transferred by computers grows very rapidly thus outgrowing the average man's capability of reception. It implies computer programs increase in the demand for which would be able to perform an introductory classitication or even selection of information directed to a particular receiver. Due to the complexity of the problem, we restricted it to understanding short newspaper notes. Among many conceptions formulated so far, the conceptual dependency worked out by Roger Schank has been chosen. It is a formal language of description of the semantics of pronouncement integrated with a text understanding algorithm. Substantial part of each text transformation system is a semantic parser of the Polish language. It is a module, which as the first and the only one has an access to the text in the Polish language. lt plays the role of an element, which finds relations between words of the Polish language and the formal registration. It translates sentences written in the language used by people into the language theory. The presented structure of knowledge units and the shape of understanding process algorithms are universal by virtue of the theory. On the other hand the defined knowledge units and the rules used in the algorithms ure only examples because they are constructed in order to understand short newspaper notes.

  15. Terms, Trends, and Insights: PV Project Finance in the United States, 2017

    Energy Technology Data Exchange (ETDEWEB)

    Feldman, David J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Schwabe, Paul D [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-10-23

    This brief is a compilation of data points and market insights that reflect the state of the project finance market for solar photovoltaic (PV) assets in the United States as of the third quarter of 2017. This information can generally be used as a simplified benchmark of the costs associated with securing financing for solar PV as well as the cost of the financing itself (i.e., the cost of capital). This work represents the second DOE sponsored effort to benchmark financing costs across the residential, commercial, and utility-scale PV markets, as part of its larger effort to benchmark the components of PV system costs.

  16. The influence of current mood state, number of previous affective episodes and predominant polarity on insight in bipolar disorder.

    Science.gov (United States)

    de Assis da Silva, Rafael; Mograbi, Daniel C; Camelo, Evelyn Vieira Miranda; Peixoto, Ursula; Santana, Cristina Maria Teixeira; Landeira-Fernandez, Jesus; Morris, Robin G; Cheniaux, Elie

    2017-11-01

    Although many studies have explored the effect of current affective episodes on insight into bipolar disorder, the potential interaction between current mood state and previous affective episodes has not been consistently investigated. To explore the influence of dominant polarity, number of previous affective episodes and current affective state on insight in bipolar disorder patients in euthymia or mania. A total of 101 patients with bipolar disorder were recruited for the study, including 58 patients in euthymia (30 with no defined predominant polarity and 28 with manic predominant polarity) and 43 in mania (26 with no defined predominant polarity and 17 with manic predominant polarity). Patients underwent a clinical assessment and insight was evaluated through the Insight Scale for Affective Disorders. Bipolar disorder patients in mania had worse insight than those in euthymia, with no effect of dominant polarity. In addition, positive psychotic symptoms showed a significant effect on insight and its inclusion as a covariate eliminated differences related to mood state. Finally, the number of previous manic or depressive episodes did not correlate with insight level. Mania is a predictor of loss of insight into bipolar disorder. However, it is possible that its contribution is linked to the more frequent presence of psychotic symptoms in this state. Dominant polarity and number/type of previous affective episodes have a limited impact on insight.

  17. State practitioner insights into local public health challenges and opportunities in obesity prevention: a qualitative study.

    Science.gov (United States)

    Stamatakis, Katherine A; Lewis, Moira; Khoong, Elaine C; Lasee, Claire

    2014-03-13

    The extent of obesity prevention activities conducted by local health departments (LHDs) varies widely. The purpose of this qualitative study was to characterize how state obesity prevention program directors perceived the role of LHDs in obesity prevention and factors that impact LHDs' success in obesity prevention. From June 2011 through August 2011, we conducted 28 semistructured interviews with directors of federally funded obesity prevention programs at 22 state and regional health departments. Interviews were transcribed verbatim, coded, and analyzed to identify recurring themes and key quotations. Main themes focused on the roles of LHDs in local policy and environmental change and on the barriers and facilitators to LHD success. The role LHDs play in obesity prevention varied across states but generally reflected governance structure (decentralized vs centralized). Barriers to local prevention efforts included competing priorities, lack of local capacity, siloed public health structures, and a lack of local engagement in policy and environmental change. Structures and processes that facilitated prevention were having state support (eg, resources, technical assistance), dedicated staff, strong communication networks, and a robust community health assessment and planning process. These findings provide insight into successful strategies state and local practitioners are using to implement innovative (and evidence-informed) community-based interventions. The change in the nature of obesity prevention requires a rethinking of the state-local relationship, especially in centralized states.

  18. Transformation of the Polish Banking Sector

    Directory of Open Access Journals (Sweden)

    Marek Stefański

    2009-07-01

    European Market, i.e. to look for new revenue sources, to reduce costs and improve their loan portfolios. The comparison of selected aspects of the Polish banking sector in the most developed EU Member States shows that the differences are still too large. Therefore, it seems correct to claim that the Polish banking system is undergoing another transition. It is adjustment to the Single European Market.

  19. [Lysenkoism in Polish botany].

    Science.gov (United States)

    Köhler, Piotr

    2008-01-01

    Lysenkoism in Poland was never an autonomous phenomenon. The whole array of reasons for which it appeared in Polish science would require a separate study--here it only needs to be pointed out that the major reasons included terror on the part of the security service, lawlessness, the ubiquitous atmosphere of intimidation and terror, censorship, the diminishing sphere of civil liberties, political show trials, propaganda and denunciations. An important role in facilitating the introduction of Lysenkoism was played also by the reorganization of science after World War Two, the isolation of Polish science from science in the West, as well as the damage it had suffered during the war. At first, Lysenkoism was promoted in Poland by a small group of enthusiastic and uncritical proponents. A overview of the events connected with the ten years of Lysenkoism in Poland (end of 1948--beginning of 1958) shows a two-tier picture of how the 'idea' was propagated. The first tier consisted in the activities of the Association of Marxist Naturalists [Koło Przyrodników-Marksistów], which it engaged in since the end of 1948. The Association was later transformed into a Union of Marxist Naturalists, and this in turn merged, in 1952, with the Copernican Society of Polish Naturalists [Polskie Towarzystwo Przyrodników im. Kopernika]. It was that society which promoted Lysenkoism longest, until the end of 1956. The propaganda and training activities of the circle and the society prepared ground for analogous activities of the newly formed Polish Academy of Science (PAN), which--since its very establishment in 1952--engaged in promoting Lysenkoism through its Second Division. These activities were aimed at naturalists, initially at those who were prominent scientists (eg. the conference at Kuźnice, 1950/1951), and then at those who were only starting their academic career (including national courses in new biology at Dziwnów, 1952, or Kortowo, 1953 and 1955). The end to promoting

  20. Polish Americans. Second, Revised Edition.

    Science.gov (United States)

    Lopata, Helen Znaniecka

    This book examines Polonia, the Polish ethnic community in America created by three giant waves of immigration between 1880 and 1990. The complicated history of this ethnic group is reflected in the lives of increasing numbers of Polish Americans, including recent immigrants brought by political and economic changes, as they achieve middle class…

  1. IDENTITY AND NEGOTIATION OF BOUNDARIES AMONG YOUNG POLISH JEWS

    OpenAIRE

    Cukras-Stelągowska, Joanna

    2015-01-01

    In this chapter, I would like to look at the processes of building the cultural identity of the young generation of Polish Jews, primarily including the models of constructing modern identifications with the Polish society, the Jewish people and the State of Israel. I will present the results of my own studies, and of those conducted by a few other young researchers dealing with these issues. My main theoretical sources are within the interpretive paradigm. The research methodology was based ...

  2. Polishing large NaCl windows on a continuous polisher

    International Nuclear Information System (INIS)

    Williamson, R.

    1979-01-01

    The Helios and Antares CO 2 fusion laser systems incorporate numerous large sodium chloride windows. These must be refinished periodically, making necessary a consistent and predictable polishing capability. A continuous polisher (or annular lap) which might at Kirtland's Developmental Optical Facility. Large NaCl windows had not been polished on this type of machine. The machine has proven itself capable of producing lambda/16 figures at 633 nm (HeNe) with extremely smooth surfaces on glass. Since then, we have been working exclusively on NaCl optics. Due to different polishing parameters between NaCl and glass, and the slight solubility of the pitch in the slurry, this phase presents new problems. The work on glass will be reviewed. Results on NaCl to date will be reported. The potential of this type of machine relative to prisms, thin and irregularly shaped optics will be discussed

  3. Detection of paint polishing defects

    Science.gov (United States)

    Rebeggiani, S.; Wagner, M.; Mazal, J.; Rosén, B.-G.; Dahlén, M.

    2018-06-01

    Surface finish plays a major role on perceived product quality, and is the first thing a potential buyer sees. Today end-of-line repairs of the body of cars and trucks are inevitably to secure required surface quality. Defects that occur in the paint shop, like dust particles, are eliminated by manual sanding/polishing which lead to other types of defects when the last polishing step is not performed correctly or not fully completed. One of those defects is known as ‘polishing roses’ or holograms, which are incredibly hard to detect in artificial light but are clearly visible in sunlight. This paper will present the first tests with a measurement set-up newly developed to measure and analyse polishing roses. The results showed good correlations to human visual evaluations where repaired panels were estimated based on the defects’ intensity, severity and viewing angle.

  4. Lysenko affair and Polish botany.

    Science.gov (United States)

    Köhler, Piotr

    2011-01-01

    This article describes the slight impact of Lysenkoism upon Polish botany. I begin with an account of the development of plant genetics in Poland, as well as the attitude of scientists and the Polish intelligentsia toward Marxist philosophy prior to the World War II. Next I provide a short history of the introduction and demise of Lysenkoism in Polish science, with a focus on events in botany, in context with key events in Polish science from 1939 to 1958. The article outlines the little effects of Lysenkoism upon botanists and their research, as well as how botanists for the most part rejected what was often termed the "new biology." My paper shows that though Lysenko's theories received political support, and were actively promoted by a small circle of scientists and Communist party activists, they were never accepted by most botanists. Once the political climate in Poland altered after the events of 1956, Lysenko's theories were immediately abandoned.

  5. An Exploratory Study of the Factors That May Affect Female Consumers’ Buying Decision of Nail Polishes

    OpenAIRE

    Sun, Chen; Adhikari, Koushik; Koppel, Kadri

    2015-01-01

    The objective of this study was to determine what factors female consumers valued more when they buy nail polish. Ninety-eight female consumers participated in a nail polish consumer study at the Sensory Analysis Center, Kansas State University. A questionnaire containing a check-all-that-apply (CATA) question, behavior questions and demographic questions was presented to each consumer. In the CATA question, the factors that may affect consumers’ decision to buy a nail polish were asked, incl...

  6. Preserving half-metallic surface states in Cr O2 : Insights into surface reconstruction rules

    Science.gov (United States)

    Deng, Bei; Shi, X. Q.; Chen, L.; Tong, S. Y.

    2018-04-01

    The issue of whether the half-metallic (HM) nature of Cr O2 could be retained at its surface has been a standing problem under debate for a few decades, but until now is still controversial. Here, based on the density functional theory calculations we show, in startling contrast to the previous theoretical understandings, that the surfaces of Cr O2 favorably exhibit a half-metallic-semiconducting (SmC) transition driven by means of a surface electronic reconstruction largely attributed to the participation of the unexpected local charge carriers (LCCs), which convert the HM double exchange surface state into a SmC superexchange state and in turn, stabilize the surface as well. On the basis of the LCCs model, a new insight into the surface reconstruction rules is attained. Our novel finding not only provided an evident interpretation for the widely observed SmC character of Cr O2 surface, but also offered a novel means to improve the HM surface states for a variety of applications in spintronics and superconductors, and promote the experimental realization of the quantum anomalous Hall effect in half-metal based systems.

  7. Elastic emission polishing

    Energy Technology Data Exchange (ETDEWEB)

    Loewenthal, M.; Loseke, K.; Dow, T.A.; Scattergood, R.O.

    1988-12-01

    Elastic emission polishing, also called elastic emission machining (EEM), is a process where a stream of abrasive slurry is used to remove material from a substrate and produce damage free surfaces with controlled surface form. It is a noncontacting method utilizing a thick elasto-hydrodynamic film formed between a soft rotating ball and the workpiece to control the flow of the abrasive. An apparatus was built in the Center, which consists of a stationary spindle, a two-axis table for the workpiece, and a pump to circulate the working fluid. The process is controlled by a programmable computer numerical controller (CNC), which presently can operate the spindle speed and movement of the workpiece in one axis only. This apparatus has been used to determine material removal rates on different material samples as a function of time, utilizing zirconium oxide (ZrO{sub 2}) particles suspended in distilled water as the working fluid. By continuing a study of removal rates the process should become predictable, and thus create a new, effective, yet simple tool for ultra-precision mechanical machining of surfaces.

  8. Robotic Automation in Computer Controlled Polishing

    Science.gov (United States)

    Walker, D. D.; Yu, G.; Bibby, M.; Dunn, C.; Li, H.; Wu, Y.; Zheng, X.; Zhang, P.

    2016-02-01

    We first present a Case Study - the manufacture of 1.4 m prototype mirror-segments for the European Extremely Large Telescope, undertaken by the National Facility for Ultra Precision Surfaces, at the OpTIC facility operated by Glyndwr University. Scale-up to serial-manufacture demands delivery of a 1.4 m off-axis aspheric hexagonal segment with surface precision robots and computer numerically controlled ('CNC') polishing machines for optical fabrication. The objective was not to assess which is superior. Rather, it was to understand for the first time their complementary properties, leading us to operate them together as a unit, integrated in hardware and software. Three key areas are reported. First is the novel use of robots to automate currently-manual operations on CNC polishing machines, to improve work-throughput, mitigate risk of damage to parts, and reduce dependence on highly-skilled staff. Second is the use of robots to pre-process surfaces prior to CNC polishing, to reduce total process time. The third draws the threads together, describing our vision of the automated manufacturing cell, where the operator interacts at cell rather than machine level. This promises to deliver a step-change in end-to-end manufacturing times and costs, compared with either platform used on its own or, indeed, the state-of-the-art used elsewhere.

  9. Political contexts and maternal health policy: insights from a comparison of south Indian states.

    Science.gov (United States)

    Smith, Stephanie L

    2014-01-01

    Nearly 300,000 women die from pregnancy-related complications each year. One-fifth of these deaths occur in India. Maternal survival rose on India's national policy agenda in the mid-2000s, but responsibility for health policy and implementation in the federal system is largely devolved to the state level where priority for the issue and maternal health outcomes vary. This study investigates sources of variation in maternal health policy and implementation sub-nationally in India. The study is guided by four analytical categories drawn from policy process literature: constitutional, governing and social structures; political contexts; actors and ideas. The experiences of two south Indian states-Tamil Nadu a leader and Karnataka a relatively slow mover-are examined. Process-tracing, a case study methodology that helps to identify roles of complex historical events in causal processes, was employed to investigate the research question in each state. The study is informed by interviews with public health policy experts and service delivery professionals, observation of implementation sites and archival document analysis. Historical legacies-Tamil Nadu's non-Brahmin social movement and Karnataka's developmental disparities combined with decentralization-shape the states' political contexts, affecting variation in maternal health policy and implementation. Competition to advance consistent political priorities across regimes in Tamil Nadu offers fertile ground for policy entrepreneurship and strong public health system administration facilitates progress. Inconsistent political priorities and relatively weak public health system administration frustrate progress in Karnataka. These variations offer insights to the ways in which sub-national political and administrative contexts shape health policy and implementation. Copyright © 2013 Elsevier Ltd. All rights reserved.

  10. Kinetic insights over a PEMFC operating on stationary and oscillatory states.

    Science.gov (United States)

    Mota, Andressa; Gonzalez, Ernesto R; Eiswirth, Markus

    2011-12-01

    Kinetic investigations in the oscillatory state have been carried out in order to shed light on the interplay between the complex kinetics exhibited by a proton exchange membrane fuel cell fed with poisoned H(2) (108 ppm of CO) and the other in serie process. The apparent activation energy (E(a)) in the stationary state was investigated in order to clarify the E(a) observed in the oscillatory state. The apparent activation energy in the stationary state, under potentiostatic control, rendered (a) E(a) ≈ 50-60 kJ mol(-1) over 0.8 V < E < 0.6 V and (b) E(a) ≈ 10 kJ mol(-1) at E = 0.3 V. The former is related to the H(2) adsorption in the vacancies of the surface poisoned by CO and the latter is correlated to the process of proton conductivity in the membrane. The dependence of the period-one oscillations on the temperature yielded a genuine Arrhenius dependence with two E(a) values: (a) E(a) around 70 kJ mol(-1), at high temperatures, and (b) E(a) around 10-15 kJ mol(-1), at lower temperatures. The latter E(a) indicates the presence of protonic mass transport coupled to the essential oscillatory mechanism. These insights point in the right direction to predict spatial couplings between anode and cathode as having the highest strength as well as to speculate the most likely candidates to promote spatial inhomogeneities. © 2011 American Chemical Society

  11. Polish-German bilingualism at school. A Polish perspective

    Directory of Open Access Journals (Sweden)

    Pulaczewska, Hanna

    2014-03-01

    Full Text Available This article presents the institutional frames for the acquisition of Polish literacy skills in Germany and the maintenance of Polish-German bilingualism after the repatriation of bilingual children to Poland. These processes are examined in the context of recent developments in the European domestic job market. While the European Union has placed proficiency in several languages among its educational objectives, and foreign languages have been made obligatory school subjects in all member countries, the potential advantages of internal European migrations for producing high-proficiency bilinguals are being ignored. Bilingualism resulting from migration and biculturalism enjoys little social prestige in the host countries. In Germany, there is significant regional variation in how school authorities react to challenges posed by the presence of minority languages. In many cases, the linguistic potential of many second-generation migrants and re-emigrants gets largely wasted because of lacking interest and incentives from German and Polish institutions alike.

  12. Sensing roughness and polish direction

    DEFF Research Database (Denmark)

    Jakobsen, Michael Linde; Olesen, Anders Sig; Larsen, Henning Engelbrecht

    2016-01-01

    As a part of the work carried out in a project supported by the Danish Council for Technology and Innovation, we have investigated the option of smoothing standard CNC-machined surfaces. In the process of constructing optical prototypes, involving custom-designed optics, the development cost...... and time consumption can become prohibitive in a research budget. Machining the optical surfaces directly is expensive and time consuming. Alternatively, a more standardized and cheaper machining method can be used, calling for the object to be manually polished. During the polishing process, the operator...... needs information about the RMS-value of the surface roughness and the current direction of the scratches introduced by the polishing process. The RMS-value indicates to the operator how far he is from the final finish, and the scratch orientation is often specified by the customer in order to avoid...

  13. New Insights on US Aggregate and State Level Trade with the China Region%New Insights on US Aggregate and State Level Trade with the China Region

    Institute of Scientific and Technical Information of China (English)

    Catherine Y. Co

    2011-01-01

    Aggregate trade data with breakdown into related and non-related party components show that US multinational enterprises use different trading strategies in the China region relative to other countries. US trade with the China region in 2002-007 is characterized by arm 's- length transactions. State-level trade data show great variability in state engagement with the region through trade: exports to the region range from 1 to 28 percent of state exports. In addition, compared to exports to other countries, exports to the region are highly concentrated. At the extreme, for some states, 96-98 percent of exports to the region are computer and electronic products. Finally, gravity regressions show that state exports to Hong Kong are posflively associated with the relative size of the ltong Kong-born population in the states. There is no evidence that stricter labor regimes lead to lower state exports.

  14. Cannabinoids cases in polish athletes

    OpenAIRE

    A Pokrywka; Z Obmiński; D Kwiatkowska; R Grucza

    2009-01-01

    The aim of this study was to investigate the number of cases and the profiles of Polish athletes who had occasionally been using marijuana or hashish throughout the period of 1998-2004, with respect to: sex, age, and discipline of sport as well as the period of testing (in- and out-of-competition). Results of the study were compared with some data reported by other WADA accredited anti-doping laboratories. Totally, 13 631 urine samples taken from Polish athletes of both sexes, aged 10-67 year...

  15. Graphite Composite Panel Polishing Fixture

    Science.gov (United States)

    Hagopian, John; Strojny, Carl; Budinoff, Jason

    2011-01-01

    The use of high-strength, lightweight composites for the fixture is the novel feature of this innovation. The main advantage is the light weight and high stiffness-to-mass ratio relative to aluminum. Meter-class optics require support during the grinding/polishing process with large tools. The use of aluminum as a polishing fixture is standard, with pitch providing a compliant layer to allow support without deformation. Unfortunately, with meter-scale optics, a meter-scale fixture weighs over 120 lb (.55 kg) and may distort the optics being fabricated by loading the mirror and/or tool used in fabrication. The use of composite structures that are lightweight yet stiff allows standard techniques to be used while providing for a decrease in fixture weight by almost 70 percent. Mounts classically used to support large mirrors during fabrication are especially heavy and difficult to handle. The mount must be especially stiff to avoid deformation during the optical fabrication process, where a very large and heavy lap often can distort the mount and optic being fabricated. If the optic is placed on top of the lapping tool, the weight of the optic and the fixture can distort the lap. Fixtures to support the mirror during fabrication are often very large plates of aluminum, often 2 in. (.5 cm) or more in thickness and weight upwards of 150 lb (68 kg). With the addition of a backing material such as pitch and the mirror itself, the assembly can often weigh over 250 lb (.113 kg) for a meter-class optic. This innovation is the use of a lightweight graphite panel with an aluminum honeycomb core for use as the polishing fixture. These materials have been used in the aerospace industry as structural members due to their light weight and high stiffness. The grinding polishing fixture consists of the graphite composite panel, fittings, and fixtures to allow interface to the polishing machine, and introduction of pitch buttons to support the optic under fabrication. In its

  16. China's New Leadership and Strategic Relations with the United States, Strategic Insights, v. 6, issue 9 (September 2005)

    OpenAIRE

    Qingguo, Jia

    2005-01-01

    This article appeared in Strategic Insights, v.4, issue 9 (2005) Strategic Insights, is a quarterly electronic journal produced by the Center for Contemporary Conflict at the Naval Postgraduate School in Monterey, California. China’s new leadership has been in office for more than three yearsâ€â€and during this time, China’s relations with the United States have received unprecedented international attention. While all share the view that this relationship is of unp...

  17. Cannabinoids cases in polish athletes

    Directory of Open Access Journals (Sweden)

    A Pokrywka

    2009-07-01

    Full Text Available The aim of this study was to investigate the number of cases and the profiles of Polish athletes who had occasionally been using marijuana or hashish throughout the period of 1998-2004, with respect to: sex, age, and discipline of sport as well as the period of testing (in- and out-of-competition. Results of the study were compared with some data reported by other WADA accredited anti-doping laboratories. Totally, 13 631 urine samples taken from Polish athletes of both sexes, aged 10-67 years, performing 46 disciplines of sport were tested. Cannabinoids were detected in 267 samples. Among Polish athletes the relative number of positive THC (tetrahydrocannabinol samples was one of the highest in Europe. The group of young Polish athletes (aged 16-24 years was the most THC-positive. THC-positive cases were noted more frequently in male athletes tested during out of competitions. The so-called contact sports (rugby, ice hockey, skating, boxing, badminton, body building and acrobatic sports were those sports, where the higher risk of cannabis use was observed. The legal interpretation of some positive cannabinoids results would be difficult because of some accidental and unintentional use of the narcotics by sportsmen. It was concluded that national anti-doping organizations (NADO’s, which are competent to judge whether the anti-doping rules were violated, should take into account the possibility of non-intentional doping use of cannabinoids via passive smoking of marijuana.

  18. Laser polishing for topography management of accelerator cavity surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Liang [College of William and Mary, Williamsburg, VA (United States); Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Klopf, J. Mike [College of William and Mary, Williamsburg, VA (United States); Reece, Charles E. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Kelley, Michael J. [College of William and Mary, Williamsburg, VA (United States); Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

    2015-07-20

    Improved energy efficiency and reduced cost are greatly desired for advanced particle accelerators. Progress toward both can be made by atomically-smoothing the interior surface of the niobium superconducting radiofrequency accelerator cavities at the machine's heart. Laser polishing offers a green alternative to the present aggressive chemical processes. We found parameters suitable for polishing niobium in all surface states expected for cavity production. As a result, careful measurement of the resulting surface chemistry revealed a modest thinning of the surface oxide layer, but no contamination.

  19. Farmers' pensions and the Polish economic crisis.

    Science.gov (United States)

    Simanis, J G

    1983-04-01

    The Polish Government, in 1977, inaugurated a new pension program that made old-age and invalidity benefits available for the first time to most farmers in that country. The evolution and eventual failure of that program were closely intertwined with a growing national economic crisis, manifested in widespread popular unrest and culminating in emergence of the Solidarity movement. The farmers' pension program was originally presented as both a social security measure and a vehicle for improving agricultural efficiency. The economic situation was expected to benefit as farms of older owners were passed to younger, presumably more efficient, successors, with the state sometimes acting as intermediary. A further step to bind the social security concept to agricultural efficiency came through relating the pension amount to the quantity of produce the individual farmer sold to the state over a number of years. The failure of these provisions and other unpopular features of the new program was aggravated by inflation and continuing deterioration of the Polish economy.

  20. Condensate polishing guidelines for PWR and BWR plants

    International Nuclear Information System (INIS)

    Robbins, P.; Crinigan, P.; Graham, B.; Kohlmann, R.; Crosby, C.; Seager, J.; Bosold, R.; Gillen, J.; Kristensen, J.; McKeen, A.; Jones, V.; Sawochka, S.; Siegwarth, D.; Keeling, D.; Polidoroff, T.; Morgan, D.; Rickertsen, D.; Dyson, A.; Mills, W.; Coleman, L.

    1993-03-01

    Under EPRI sponsorship, an industry committee, similar in form and operation to other guideline committees, was created to develop Condensate Polishing Guidelines for both PWR and BWR systems. The committee reviewed the available utility and water treatment industry experience on system design and performance and incorporated operational and state-of-the-art information into document. These guidelines help utilities to optimize present condensate polisher designs as well as be a resource for retrofits or new construction. These guidelines present information that has not previously been presented in any consensus industry document. The committee generated guidelines that cover both deep bed and powdered resin systems as an integral part of the chemistry of PWR and BWR plants. The guidelines are separated into sections that deal with the basis for condensate polishing, system design, resin design and application, data management and performance and management responsibilities

  1. Financial repression, money growth, and seignorage: The Polish experience

    NARCIS (Netherlands)

    Aarle, B. van; Budina, N.

    1997-01-01

    Financial Repression, Money Growth and Seignorage: The Polish Experience. — A small analytical framework is developed to analyze the relation between reserve requirements, base money growth and seignorage revenues. From the analysis, the authors can derive of steady-state seignorage revenues as a

  2. Sensory factors affecting female consumers' acceptability of nail polish.

    Science.gov (United States)

    Sun, C; Koppel, K; Adhikari, K

    2015-12-01

    The objectives of this study were to determine what sensory factors impact consumers' acceptability of nail polishes, to explore how these sensory factors impact consumers' acceptability of nail polishes, to investigate whether there are any consumer segments according to their overall acceptability on different nail polishes and to scrutinize how the consumer segments are related to the sensory factors. Ninety-eight females participated in a nail polish consumer study at Kansas State University. Eight commercial products belonging to four categories - regular (REG), gel (GEL), flake (FLK) and water-based (WAT) - were evaluated. Each nail polish sample was evaluated twice by each participant in two different tasks - a task devoted to applying and evaluating the product and a task devoted to observing the appearance and evaluating the product. Pearson's correlation analysis, analysis of variance (ANOVA), external preference mapping, cluster analysis and internal preference mapping were applied for data analysis. Participants' scores of overall liking of the nail polishes were similar in the application task and in the observation task. In general, participants liked the REG and GEL product samples more than the FLK and WAT samples. Among all the sensory attributes, appearance attributes were the major factors that affected participants' overall liking. Aroma seemed to be a minor factor to participants' overall liking. Some sensory attributes, such as runny, shininess, opacity, spreadability, smoothness, coverage and wet appearance, were found to drive participants' overall acceptability positively, whereas others such as pinhole, fatty-edges, blister, brushlines, pearl-like, flake-protrusion, glittery and initial-drag impacted participants' overall acceptability negatively. Four clusters of participants were identified according to their overall liking scores from both the application task and the observation task. Participants' acceptability, based on different

  3. PORT (Programme of Recognition and Therapy): the first Polish recognition and treatment programme for patients with an at-risk mental state.

    Science.gov (United States)

    Kotlicka-Antczak, Magdalena; Pawełczyk, Tomasz; Rabe-Jabłońska, Jolanta; Pawełczyk, Agnieszka

    2015-08-01

    To present the activities of the first early intervention centre in Poland and the Programme of Recognition and Therapy (PORT) run by the centre. An overview of the admission process, diagnostic procedures and therapeutic interventions offered to individuals with an at-risk mental state. The PORT programme, developed in 2010, included 81 individuals, aged 15-29 years so far. The diagnostic procedures consists of evaluation of symptoms with the use of the Comprehensive Assessment of At-Risk Mental State (CAARMS), assessment of premorbid and current personality traits and the evaluation of cognitive functions. Therapeutic interventions include cognitive behavioural therapy, diet supplementation with omega-3 fatty acids and pharmacological treatment. Overall rate of conversion into psychosis within the years 2010-2103 was 18.5%. The programme has also been a source of research in the field of early psychosis. The PORT programme enables young people with an ARMS an easy access to the specialized service offering treatment tailored to their specific needs. © 2014 Wiley Publishing Asia Pty Ltd.

  4. Long Distance Solidarity: Polish Public Opinion and the Boer War 1899–1902

    Directory of Open Access Journals (Sweden)

    Szlanta Piotr

    2017-06-01

    Full Text Available The bloody conflict which was taking place in South Africa in the years 1899-1902 was followed with a great interest by Polish public opinion. Its greatest part strongly sympathized with the Boer republics. Their burgers were idealized and presented by the Polish press as brave fighters for independence, who dared to stand up against the world empire to defend their rights while Great Britain was attributed full responsibility for the outbreak of the war. For many Poles the Boers personified the general idea of freedom fighters and symbolized all suppressed nations. Their sad fate seemed to be quite similar to the Polish one and this similarity was the main source of sympathy toward defenders of the Transvaal and Free Orange State. Voices of few Polish intellectuals, who called for a more objective and not so emotional view on the war, could not change the pro-Boers stance of the greatest part of Polish public opinion.

  5. Polish energy-system modernisation

    International Nuclear Information System (INIS)

    Drozdz, M.

    2003-01-01

    The Polish energy-system needs intensive investments in new technologies, which are energy efficient, clean and cost effective. Since the early 1990s, the Polish economy has had practically full access to modern technological devices, equipment and technologies. Introducing new technologies is a difficult task for project teams, constructors and investors. The author presents a set of principles for project teams useful in planning and energy modernisation. Several essential features are discussed: Energy-efficient appliances and systems; Choice of energy carriers, media and fuels; Optimal tariffs, maximum power and installed power; Intelligent, integrated, steering systems; Waste-energy recovery; Renewable-energy recovery. In practice there are several difficulties connected with planning and realising good technological and economic solutions. The author presents his own experiences of energy-system modernisation of industrial processes and building new objects. (Author)

  6. Energy savings in Polish buildings

    Energy Technology Data Exchange (ETDEWEB)

    Markel, L.C.; Gula, A.; Reeves, G.

    1995-12-31

    A demonstration of low-cost insulation and weatherization techniques was a part of phase 1 of the Krakow Clean Fossil Fuels and Energy Efficient Project. The objectives were to identify a cost-effective set of measures to reduce energy used for space heating, determine how much energy could be saved, and foster widespread implementation of those measures. The demonstration project focused on 4 11-story buildings in a Krakow housing cooperative. Energy savings of over 20% were obtained. Most important, the procedures and materials implemented in the demonstration project have been adapted to Polish conditions and applied to other housing cooperatives, schools, and hospitals. Additional projects are being planned, in Krakow and other cities, under the direction of FEWE-Krakow, the Polish Energie Cities Network, and Biuro Rozwoju Krakowa.

  7. SAFETY PLATFORM OF POLISH TRANSPORT

    Directory of Open Access Journals (Sweden)

    Katarzyna CHRUZIK

    2016-03-01

    Full Text Available Analyzing the level of Polish transport safety culture can be seen that it is now dependent on the culture of safety management within the organization and the requirements and recommendations of law in this field for different modes of transport (air, rail, road, water. Of the four basic types of transport requirements are widely developed in the aviation, rail, and water – the sea. In order to harmonize the requirements for transport safety so it appears advisable to develop a platform for exchange of safety information for different modes of transport, and the development of good practices multimodal offering the possibility of improving Polish transport safety. Described in the publication of the proposal in addition to the alignment platform experience and knowledge in the field of transport safety in all its kinds, it can also be a tool for perfecting new operators of public transport.

  8. Polishing compound for plastic surfaces

    Science.gov (United States)

    Stowell, M.S.

    1991-01-01

    This invention is comprised of a polishing compound for plastic materials. The compound includes approximately by approximately by weight 25 to 80 parts at least one petroleum distillate lubricant, 1 to 12 parts mineral spirits, 50 to 155 parts abrasive paste, and 15 to 60 parts water. Preferably, the compound includes approximately 37 to 42 parts at least one petroleum distillate lubricant, up to 8 parts mineral spirits, 95 to 110 parts abrasive paste, and 50 to 55 parts water. The proportions of the ingredients are varied in accordance with the particular application. The compound is used on PLEXIGLAS{trademark}, LEXAN{trademark}, LUCITE{trademark}, polyvinyl chloride (PVC), and similar plastic materials whenever a smooth, clear polished surface is desired.

  9. Careers of young Polish chemists

    OpenAIRE

    Kosmulski, Marek

    2014-01-01

    Typical young Polish scientist is an alumnus of doctoral studies at the same university and department where he/she completed his/her Master degree. The career is continued by receiving a habilitation at the same university and department. Then a holder of habilitation is promoted to a tenured position at the same university and department. Detailed analysis of scientific careers of 154 recent Ph.D. recipients and of 16 habilitation candidates in chemistry from University of Warsaw is present...

  10. The place of polish in the multilingual space of the European Union

    Directory of Open Access Journals (Sweden)

    T. I. Neprytska

    2015-03-01

    Full Text Available The article studies the position of the Polish language in the multilingual space of the European Union and determines the key factors which facilitate its gaining popularity and spreading in Europe. A large territory and population determine the significant presence of Polish in the European Union. Intense economic development facilitates popularization of learning and using Polish in the business medium, however, English was and still remains the dominating language of business. Active work of the state on improving the reputation of the country abroad, civilizational (value­based unity with other nations of the EU, favorable geographical position, common Indo­European roots of Germanic, Romanic and Slavonic  languages as well as usage of the Latin type create favorable conditions for the development and popularization of Polish on the territory of the EU. The article also mentions a number of concerns, which are rooted in the historical past of a dependent or semi­dependent existence of the Polish people, namely, the existence of the Polish and culture in the shade of German and Russian culture space, the negative international image of modern Poland, which was formed at the beginning of the 1990­s, the low level of Europeans’ familiarization with the Polish culture, absence of popularity and economic necessity of learning Polish abroad.

  11. 19th Polish Control Conference

    CERN Document Server

    Kacprzyk, Janusz; Oprzędkiewicz, Krzysztof; Skruch, Paweł

    2017-01-01

    This volume contains the proceedings of the KKA 2017 – the 19th Polish Control Conference, organized by the Department of Automatics and Biomedical Engineering, AGH University of Science and Technology in Kraków, Poland on June 18–21, 2017, under the auspices of the Committee on Automatic Control and Robotics of the Polish Academy of Sciences, and the Commission for Engineering Sciences of the Polish Academy of Arts and Sciences. Part 1 deals with general issues of modeling and control, notably flow modeling and control, sliding mode, predictive, dual, etc. control. In turn, Part 2 focuses on optimization, estimation and prediction for control. Part 3 is concerned with autonomous vehicles, while Part 4 addresses applications. Part 5 discusses computer methods in control, and Part 6 examines fractional order calculus in the modeling and control of dynamic systems. Part 7 focuses on modern robotics. Part 8 deals with modeling and identification, while Part 9 deals with problems related to security, fault ...

  12. Nudging Waste Diversion at Western State Colorado University: Application of Behavioral Insights

    Science.gov (United States)

    McCoy, Kimberly; Oliver, Justin J.; Borden, D. Scott; Cohn, Scott I.

    2018-01-01

    Purpose: This paper aims to test a nudge, or intervention, designed through behavioral insights at a university campus to discover cost-effective means for increasing recycling participation and methods for estimating waste removal cost savings. Design/methodology/approach: A series of studies were conducted demonstrating the effectiveness of…

  13. The tourism attractiveness of Polish libraries

    OpenAIRE

    Miedzińska, Magdalena; Tanaś, Sławoj

    2009-01-01

    The aim of the article is to draw the reader's attention to the tourism attractiveness of renowned Polish libraries. These have attained a tourism function due to tourism exploration and penetration, but remain in the shadow of other Polish cultural assets. The article outlines the historical geography of Polish libraries, an analysis of tourism assets and an attempt to classify and catalogue libraries in Poland.

  14. Polish Experts’ Communication Encounters with Locals in a Chinese Subsidiary of a Western MNC

    DEFF Research Database (Denmark)

    Wilczewski, Michał; Søderberg, Anne-Marie; Gut, Arkadiusz

    and thematic analysis. Their stories reveal prerequisites for intercultural communication, language and culture-related communication problems with strategies to mitigate them, and factors that affect communication. The study offers important insights into the Polish-Chinese communication in a specific...

  15. Corporate Politics on Polish Millennials

    OpenAIRE

    Natalia Roślik

    2017-01-01

    In the very beginning of this particular paper, an author is trying to determine and describe who Millennials actually are. Then, the basis of Millennials definition is analysing corporation’s activity over the past years regarding this age group. The main goal of the thesis is to bring their specific futures out and describe what corporations on Polish job market are doing to encourage them to work in their offices. Especially in Poland within the last years, it is observed that big multinat...

  16. Polish Foundation for Energy Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    The Polish Foundation for Energy Efficiency (FEWE) was established in Poland at the end of 1990. FEWE, as an independent and non-profit organization, has the following objectives: to strive towards an energy efficient national economy, and to show the way and methods by use of which energy efficiency can be increased. The activity of the Foundation covers the entire territory of Poland through three regional centers: in Warsaw, Katowice and Cracow. FEWE employs well-known and experienced specialists within thermal and power engineering, civil engineering, economy and applied sciences. The organizer of the Foundation has been Battelle Memorial Institute - Pacific Northwest Laboratories from the USA.

  17. Condensate polisher application for PWR steam generator corrosion control

    International Nuclear Information System (INIS)

    Sawochka, S.G.; Leibovitz, J.; Siegwarth, D.P.; Pearl, W.L.

    1981-01-01

    The evolution of corrosion attack modes particularly in recirculating U-tube PWR steam generators has dictated a thorough review of the advantages and disadvantages of condensate polishing. Analytical modeling techniques to qualitatively predict crevice chemistry variations resulting from steam generator bulk water variations have allowed valuable insights to be developed. Modeling results complemented by steam generator and laboratory corrosion data will be employed to set condensate demineralizer effluent specifications consistent with control of steam generator corrosion. Laboratory and plant studies are being performed to demonstrate achievability of necessary effluent specifications. (author)

  18. Sexual activity of Polish adults

    Directory of Open Access Journals (Sweden)

    Beata Pastwa-Wojciechowska

    2014-03-01

    Full Text Available Aim. The purpose of this research was to explore the subject of sexual activity in the Polish population, with special focus on age and gender differences, and sexual infidelity. Sexual activity is one of the basic factors in initiating and maintaining relationships. On the one hand, sexual activity enables us to meet natural needs and maintain an intimate relationship with another human being; on the other, it may allow us to overcome loneliness and social isolation by providing the opportunity to express feelings of closeness and unity. Material and method. The research was conducted on a representative group of 3,200 Poles aged between 15–49, with the support of a well-known Polish research company – TNS OBOP. Face-to-face and Pencil and Paper (PAPI interviews were carried out. Results. The results focus on two main issues: the age and motives of sexual initiation among teenagers (with a significant percentage starting their sexual activity at the age of 15, and the quality of the sexual lives of adults (average number of sexual partners, sexual infidelity and sexual satisfaction. Conclusion. There is dependence between the type of relationship and the performance or non-performance of sexual activity, as well as the quality of the relationship. Among both adolescents and adults, remaining in a stable relationship (partnership or marriage promotes loyalty. The performance of sexual goals turns out to be an important mechanism regulating the interpersonal aspects of a relationship, influencing their perception and evaluation.

  19. Buffered Electrochemical Polishing of Niobium

    Energy Technology Data Exchange (ETDEWEB)

    Ciovati, Gianluigi [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Tian, Hui [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); College of William and Mary, Williamsburg, VA (United States); Corcoran, Sean [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States)

    2011-03-01

    The standard preparation of superconducting radio-frequency (SRF) cavities made of pure niobium include the removal of a 'damaged' surface layer, by buffered chemical polishing (BCP) or electropolishing (EP), after the cavities are formed. The performance of the cavities is characterized by a sharp degradation of the quality factor when the surface magnetic field exceeds about 90 mT, a phenomenon referred to as 'Q-drop.' In cavities made of polycrystalline fine grain (ASTM 5) niobium, the Q-drop can be significantly reduced by a low-temperature (? 120 °C) 'in-situ' baking of the cavity if the chemical treatment was EP rather than BCP. As part of the effort to understand this phenomenon, we investigated the effect of introducing a polarization potential during buffered chemical polishing, creating a process which is between the standard BCP and EP. While preliminary results on the application of this process to Nb cavities have been previously reported, in this contribution we focus on the characterization of this novel electrochemical process by measuring polarization curves, etching rates, surface finish, electrochemical impedance and the effects of temperature and electrolyte composition. In particular, it is shown that the anodic potential of Nb during BCP reduces the etching rate and improves the surface finish.

  20. Bio-geomorphic feedback causes alternative stable landscape states: insights from coastal marshes and tidal flats

    Science.gov (United States)

    Temmerman, Stijn; Wang, Chen

    2014-05-01

    Many bio-geomorphic systems, such as hill slopes, river floodplains, tidal floodplains and dune areas, seem to be vulnerable to shifts between alternative bare and vegetated landscape states, and these shifts seem to be driven by bio-geomorphic feedbacks. Here we search for empirical evidence for alternative stable state behavior in intertidal flats and marshes, where bio-geomorphic interactions are known to be intense. Large-scale transitions have been reported worldwide between high-elevation vegetated marshes and low-elevation bare flats in intertidal zones of deltas, estuaries, and coastal embayments. It is of significant importance to understand and predict such transitions, because vegetated marshes provide significant services to coastal societies. Previous modeling studies suggest that the ecological theory of catastrophic shifts between alternative stable ecosystem states potentially explains the transition between bare flats and vegetated marshes. However, up to now only few empirical evidence exists. In our study, the hypothesis is empirically tested that vegetated marshes and bare tidal flats can be considered as alternative stable landscape states with rapid shifts between them. We studied historical records (1930s - 2000s) of intertidal elevation surveys and aerial pictures from the Westerschelde estuary (SW Netherlands). Our results demonstrated the existence of: (1) bimodality in the intertidal elevation distribution, i.e., the presence of two peaks in the elevation frequency distribution corresponding to a completely bare state and a densely vegetated state; (2) the relatively rapid transition in elevation when intertidal flats evolve from bare to vegetated states, with sedimentation rates that are 2 to 8 times faster than during the stable states; (3) a threshold elevation above which the shift from bare to vegetated state has a high chance to occur. Our observations demonstrate the abrupt non-linear shift between low-elevation bare flats and high

  1. Popularity of marijuana among Polish students

    Directory of Open Access Journals (Sweden)

    Michał Pająk

    2017-09-01

    Full Text Available Introduction and the aim: Marijuana is the most commonly used drug in the world (excluding alcohol and tobacco. According to the literature about 16% of Poles at the age of 16 to 64 years old, at least once have used cannabis. The aim of study was to estimate the popularity of marijuana among students of Polish universities. We also asked questions about respondents’ attitude towards marijuana and opinions about its validation. Material and methods: The study was conducted in 2017 on 132 individuals – 60 men and 72 women. The results were analyzed in STATISTICA 10 at p<0.05. Results:Out of interviewees, 63.6% of them, at least once in their lives, have used marijuana. This is a percentage of up to four times greater than that one given in the literature for the general population. Even 80% of men and 50% of women have tried marijuana at least once in their lives. Students of Catholic University of Lublin reach for marijuana significantly more often than students of Medical University of Lublin. The majority of respondents (53% treats marijuana as a "soft" drug, though up 67.4% believe that it has the addictive potential. More than a half of respondents (56.8% stands for liberalization of rules relevant to marijuana in Poland. Vast majority (70% of respondents believes that marijuana is easily available in Poland. Conclusions: Marijuana is a drug popular among students. The criminalization of drug use in Poland is not effective for the prevention of its use, the majority of respondents believes that marijuana is easily available in Poland. Considering the negative health and social consequences of the current state, it is worth wondering about making changes in the education system and Polish drug law.

  2. Droughts in historical times in Polish territory

    Science.gov (United States)

    Limanowka, Danuta; Cebulak, Elzbieta; Pyrc, Robert; Doktor, Radoslaw

    2015-04-01

    Climate change is one of the key environmental, social and economical issues, and it is also followed by political consequences. Impact of climate conditions on countries' economy is increasingly recognized, and a lot of attention is given, both in the global scale and by the individual national governments. In years 2008-2010, at the Poland -Institute of Meteorology and Water Management-National Research Institute was realized the KLIMAT Project on Impact of climate change on environment, economy and society (changes, effects and methods of reducing them, conclusions for science, engineering practice and economic planning) No. POIG01-03-01-14-011/08. The project was financed by the European Union and Polish state budget in frame of Innovative Economy Operational Programme. A very wide range of research was carried out in the different thematic areas. One of them was "Natural disasters and internal safety of the country (civil and economical)." The problem of drought in Poland was developed in terms of meteorology and hydrology. "Proxy" Data Descriptions very often inform about dry years and seasons, hot periods without precipitation. Analysis of historical material allowed to extract the years that have experienced prolonged periods of high temperatures and rainfall shortages. Weather phenomenon defined as drought belongs to extreme events. This information was very helpful in the process of indexing and thus to restore the course and intensity of climatic elements in the past. The analysis covered the period from year 1000 to modern times. Due to the limited information from the period of 1000-1500 the authors focused primarily on the period from 1500 to 2010. Analysis of the collected material has allowed the development of a highly precise temporal structure of the possible occurrence of dry periods to Polish territory.

  3. A new strategy for the restructuring of Polish energy sector

    International Nuclear Information System (INIS)

    Kozlowski, R.H.; Tallat, J.

    2006-01-01

    In accordance with strategic planning in the military, the leader (in this case the Minister of Economy) is responsible for setting goals, finding the right people to accomplish these goals (those working in the energy sector), analysing the current situation (state of the energy sector) and evaluating available resources (conventional and renewable energy resources). In terms of economic planning (this term is proper for an economy that sets numerous laws and quotas), the goal is to get the Polish economy out of economic slump, which is the result of seventeen years of improper government practices, into a state of prosperity corresponding to no less than the European average. The only way of accomplishing this goal of high economic growth and catching up with highly-developed countries is to develop local inexpensive energy resources. This study focuses on the potential to develop abundant Polish geothermal resources as well as natural gas based co-generation. (author)

  4. State-level gonorrhea rates and expedited partner therapy laws: insights from time series analyses.

    Science.gov (United States)

    Owusu-Edusei, K; Cramer, R; Chesson, H W; Gift, T L; Leichliter, J S

    2017-06-01

    In this study, we examined state-level monthly gonorrhea morbidity and assessed the potential impact of existing expedited partner therapy (EPT) laws in relation to the time that the laws were enacted. Longitudinal study. We obtained state-level monthly gonorrhea morbidity (number of cases/100,000 for males, females and total) from the national surveillance data. We used visual examination (of morbidity trends) and an autoregressive time series model in a panel format with intervention (interrupted time series) analysis to assess the impact of state EPT laws based on the months in which the laws were enacted. For over 84% of the states with EPT laws, the monthly morbidity trends did not show any noticeable decreases on or after the laws were enacted. Although we found statistically significant decreases in gonorrhea morbidity within four of the states with EPT laws (Alaska, Illinois, Minnesota, and Vermont), there were no significant decreases when the decreases in the four states were compared contemporaneously with the decreases in states that do not have the laws. We found no impact (decrease in gonorrhea morbidity) attributable exclusively to the EPT law(s). However, these results do not imply that the EPT laws themselves were not effective (or failed to reduce gonorrhea morbidity), because the effectiveness of the EPT law is dependent on necessary intermediate events/outcomes, including sexually transmitted infection service providers' awareness and practice, as well as acceptance by patients and their partners. Published by Elsevier Ltd.

  5. [Polish forensic entomology--the past, present and future perspectives].

    Science.gov (United States)

    Skowronek, Rafał; Chowaniec, Czesław

    2010-01-01

    Forensic medicine increasingly more often benefits from the achievements of other biological sciences, which may be used in post mortem investigation. One of them is forensic entomology--the science based on the knowledge about biology of insects preying on cadavers. The objective of this article is to present the history of Polish forensic entomology, its present state and possibilities and directions of further development.

  6. Chemical etching and polishing of InP

    International Nuclear Information System (INIS)

    Kurth, E.; Reif, A.; Gottschalch, V.; Finster, J.; Butter, E.

    1988-01-01

    This paper describes possibilities of several chemical preparations for the selective cleaning of InP surfaces. The investigations of the surface states after the chemical treatment were carried out by means of XPS measurements. A pre-etching with (NH 4 ) 2 S 2 O 8 :H 2 SO 4 :H 2 O and a polishing with 1% bromine in methanol produce optically smooth (100)-and (111) P surfaces free of oxides. (author)

  7. States of consciousness experimental insights into meditation, waking, sleep and dreams

    CERN Document Server

    Cvetkovic, Dean

    2011-01-01

    In this accessible overview of current knowledge, an expert team of editors and authors describe experimental approaches to consciousness. These approaches are shedding light on some of the hitherto unknown aspects of the distinct states of human consciousness, including the waking state, different states of sleep and dreaming, meditation and more. The book presents the latest research studies by the contributing authors, whose specialities span neuroscience, neurology, biomedical engineering, clinical psychology and psychophysiology, psychosocial medicine and anthropology. Overall this anthology provides the reader with a clear picture of how different states of consciousness can be defined, experimentally measured and analysed. A future byproduct of this knowledge may be anticipated in the development of systematic corrective treatments for many disorders and pathological problems of consciousness.

  8. Brain dynamics of post-task resting state are influenced by expertise: Insights from baseball players.

    Science.gov (United States)

    Muraskin, Jordan; Dodhia, Sonam; Lieberman, Gregory; Garcia, Javier O; Verstynen, Timothy; Vettel, Jean M; Sherwin, Jason; Sajda, Paul

    2016-12-01

    Post-task resting state dynamics can be viewed as a task-driven state where behavioral performance is improved through endogenous, non-explicit learning. Tasks that have intrinsic value for individuals are hypothesized to produce post-task resting state dynamics that promote learning. We measured simultaneous fMRI/EEG and DTI in Division-1 collegiate baseball players and compared to a group of controls, examining differences in both functional and structural connectivity. Participants performed a surrogate baseball pitch Go/No-Go task before a resting state scan, and we compared post-task resting state connectivity using a seed-based analysis from the supplementary motor area (SMA), an area whose activity discriminated players and controls in our previous results using this task. Although both groups were equally trained on the task, the experts showed differential activity in their post-task resting state consistent with motor learning. Specifically, we found (1) differences in bilateral SMA-L Insula functional connectivity between experts and controls that may reflect group differences in motor learning, (2) differences in BOLD-alpha oscillation correlations between groups suggests variability in modulatory attention in the post-task state, and (3) group differences between BOLD-beta oscillations that may indicate cognitive processing of motor inhibition. Structural connectivity analysis identified group differences in portions of the functionally derived network, suggesting that functional differences may also partially arise from variability in the underlying white matter pathways. Generally, we find that brain dynamics in the post-task resting state differ as a function of subject expertise and potentially result from differences in both functional and structural connectivity. Hum Brain Mapp 37:4454-4471, 2016. © 2016 The Authors Human Brain Mapping Published by Wiley Periodicals, Inc. © 2016 The Authors Human Brain Mapping Published by Wiley Periodicals

  9. Theoretical Insights Into the Excited State Double Proton Transfer Mechanism of Deep Red Pigment Alkannin.

    Science.gov (United States)

    Zhao, Jinfeng; Dong, Hao; Zheng, Yujun

    2018-02-08

    As the most important component of deep red pigments, alkannin is investigated theoretically in detail based on time-dependent density functional theory (TDDFT) method. Exploring the dual intramolecular hydrogen bonds (O1-H2···O3 and O4-H5···O6) of alkannin, we confirm the O1-H2···O3 may play a more important role in the first excited state than the O4-H5···O6 one. Infrared (IR) vibrational analyses and subsequent charge redistribution also support this viewpoint. Via constructing the S 1 -state potential energy surface (PES) and searching transition state (TS) structures, we illuminate the excited state double proton transfer (ESDPT) mechanism of alkannin is the stepwise process that can be first launched by the O1-H2···O3 hydrogen bond wire in gas state, acetonitrile (CH 3 CN) and cyclohexane (CYH) solvents. We present a novel mechanism that polar aprotic solvents can contribute to the first-step proton transfer (PT) process in the S 1 state, and nonpolar solvents play important roles in lowering the potential energy barrier of the second-step PT reaction.

  10. Large-scale brain network associated with creative insight: combined voxel-based morphometry and resting-state functional connectivity analyses.

    Science.gov (United States)

    Ogawa, Takeshi; Aihara, Takatsugu; Shimokawa, Takeaki; Yamashita, Okito

    2018-04-24

    Creative insight occurs with an "Aha!" experience when solving a difficult problem. Here, we investigated large-scale networks associated with insight problem solving. We recruited 232 healthy participants aged 21-69 years old. Participants completed a magnetic resonance imaging study (MRI; structural imaging and a 10 min resting-state functional MRI) and an insight test battery (ITB) consisting of written questionnaires (matchstick arithmetic task, remote associates test, and insight problem solving task). To identify the resting-state functional connectivity (RSFC) associated with individual creative insight, we conducted an exploratory voxel-based morphometry (VBM)-constrained RSFC analysis. We identified positive correlations between ITB score and grey matter volume (GMV) in the right insula and middle cingulate cortex/precuneus, and a negative correlation between ITB score and GMV in the left cerebellum crus 1 and right supplementary motor area. We applied seed-based RSFC analysis to whole brain voxels using the seeds obtained from the VBM and identified insight-positive/negative connections, i.e. a positive/negative correlation between the ITB score and individual RSFCs between two brain regions. Insight-specific connections included motor-related regions whereas creative-common connections included a default mode network. Our results indicate that creative insight requires a coupling of multiple networks, such as the default mode, semantic and cerebral-cerebellum networks.

  11. Corporate Politics on Polish Millennials

    Directory of Open Access Journals (Sweden)

    Natalia Roślik

    2017-12-01

    Full Text Available In the very beginning of this particular paper, an author is trying to determine and describe who Millennials actually are. Then, the basis of Millennials definition is analysing corporation’s activity over the past years regarding this age group. The main goal of the thesis is to bring their specific futures out and describe what corporations on Polish job market are doing to encourage them to work in their offices. Especially in Poland within the last years, it is observed that big multinational companies are paying special attention to Millennials and trying to hire them before competitors will do so. As a part of this paper, an author will describe corporate politics and practices on Thomson Reuters and BNY Mellon examples. Within this work, an author is also discussing key features and differences between this generation and Millennials parent’s generation. Additionally, there is a reference to corporate social responsibility concept and work-life balance issues.

  12. Determinants of Polish public debt

    Directory of Open Access Journals (Sweden)

    Tomasz Stryjewski

    2011-12-01

    Full Text Available The crisis, which had its beginning in 2007, turned into the debt crisis of the countries. The examples of Greece, Ireland, Iceland or Spain showed the category of public debt in a new light. Poland, at the turn of 2010/2011 also achieved the upper level of public debt acceptable by the law. In the present situation of the European Union countries being in debt, and even insolvent, the situation in Poland becomes riskier. This article attempts at an empirical verification of the determinants of Polish public debt within 95 months (the data link with the period of time from January 2003 to November 2010. The verification of the main factors which cause the formation of public debt takes place by means of an appropriately verified econometric model.

  13. Zerodur polishing process for high surface quality and high efficiency

    International Nuclear Information System (INIS)

    Tesar, A.; Fuchs, B.

    1992-08-01

    Zerodur is a glass-ceramic composite importance in applications where temperature instabilities influence optical and mechanical performance, such as in earthbound and spaceborne telescope mirror substrates. Polished Zerodur surfaces of high quality have been required for laser gyro mirrors. Polished surface quality of substrates affects performance of high reflection coatings. Thus, the interest in improving Zerodur polished surface quality has become more general. Beyond eliminating subsurface damage, high quality surfaces are produced by reducing the amount of hydrated material redeposited on the surface during polishing. With the proper control of polishing parameters, such surfaces exhibit roughnesses of < l Angstrom rms. Zerodur polishing was studied to recommend a high surface quality polishing process which could be easily adapted to standard planetary continuous polishing machines and spindles. This summary contains information on a polishing process developed at LLNL which reproducibly provides high quality polished Zerodur surfaces at very high polishing efficiencies

  14. Experimental Insights into Ground-State Selection of Quantum XY Pyrochlores

    Science.gov (United States)

    Hallas, Alannah M.; Gaudet, Jonathan; Gaulin, Bruce D.

    2018-03-01

    Extensive experimental investigations of the magnetic structures and excitations in the XY pyrochlores have been carried out over the past decade. Three families of XY pyrochlores have emerged: Yb2B2O7, Er2B2O7, and, most recently, [Formula: see text]Co2F7. In each case, the magnetic cation (either Yb, Er, or Co) exhibits XY anisotropy within the local pyrochlore coordinates, a consequence of crystal field effects. Materials in these families display rich phase behavior and are candidates for exotic ground states, such as quantum spin ice, and exotic ground-state selection via order-by-disorder mechanisms. In this review, we present an experimental summary of the ground-state properties of the XY pyrochlores, including evidence that they are strongly influenced by phase competition. We empirically demonstrate the signatures for phase competition in a frustrated magnet: multiple heat capacity anomalies, suppressed TN or TC, sample- and pressure-dependent ground states, and unconventional spin dynamics.

  15. Convergent Polishing: A Simple, Rapid, Full Aperture Polishing Process of High Quality Optical Flats & Spheres

    Science.gov (United States)

    Suratwala, Tayyab; Steele, Rusty; Feit, Michael; Dylla-Spears, Rebecca; Desjardin, Richard; Mason, Dan; Wong, Lana; Geraghty, Paul; Miller, Phil; Shen, Nan

    2014-01-01

    Convergent Polishing is a novel polishing system and method for finishing flat and spherical glass optics in which a workpiece, independent of its initial shape (i.e., surface figure), will converge to final surface figure with excellent surface quality under a fixed, unchanging set of polishing parameters in a single polishing iteration. In contrast, conventional full aperture polishing methods require multiple, often long, iterative cycles involving polishing, metrology and process changes to achieve the desired surface figure. The Convergent Polishing process is based on the concept of workpiece-lap height mismatch resulting in pressure differential that decreases with removal and results in the workpiece converging to the shape of the lap. The successful implementation of the Convergent Polishing process is a result of the combination of a number of technologies to remove all sources of non-uniform spatial material removal (except for workpiece-lap mismatch) for surface figure convergence and to reduce the number of rogue particles in the system for low scratch densities and low roughness. The Convergent Polishing process has been demonstrated for the fabrication of both flats and spheres of various shapes, sizes, and aspect ratios on various glass materials. The practical impact is that high quality optical components can be fabricated more rapidly, more repeatedly, with less metrology, and with less labor, resulting in lower unit costs. In this study, the Convergent Polishing protocol is specifically described for fabricating 26.5 cm square fused silica flats from a fine ground surface to a polished ~λ/2 surface figure after polishing 4 hr per surface on a 81 cm diameter polisher. PMID:25489745

  16. Seismic amplification within the Seattle Basin, Washington State: Insights from SHIPS seismic tomography experiments

    Science.gov (United States)

    Snelson, C.M.; Brocher, T.M.; Miller, K.C.; Pratt, T.L.; Trehu, A.M.

    2007-01-01

    Recent observations indicate that the Seattle sedimentary basin, underlying Seattle and other urban centers in the Puget Lowland, Washington, amplifies long-period (1-5 sec) weak ground motions by factors of 10 or more. We computed east-trending P- and S-wave velocity models across the Seattle basin from Seismic Hazard Investigations of Puget Sound (SHIPS) experiments to better characterize the seismic hazard the basin poses. The 3D tomographic models, which resolve features to a depth of 10 km, for the first time define the P- and S-wave velocity structure of the eastern end of the basin. The basin, which contains sedimentary rocks of Eocene to Holocene, is broadly symmetric in east-west section and reaches a maximum thickness of 6 km along our profile beneath north Seattle. A comparison of our velocity model with coincident amplification curves for weak ground motions produced by the 1999 Chi-Chi earthquake suggests that the distribution of Quaternary deposits and reduced velocity gradients in the upper part of the basement east of Seattle have significance in forecasting variations in seismic-wave amplification across the basin. Specifically, eastward increases in the amplification of 0.2- to 5-Hz energy correlate with locally thicker unconsolidated deposits and a change from Crescent Formation basement to pre-Tertiary Cascadia basement. These models define the extent of the Seattle basin, the Seattle fault, and the geometry of the basement contact, giving insight into the tectonic evolution of the Seattle basin and its influence on ground shaking.

  17. State-Of in Uav Remote Sensing Survey - First Insights Into Applications of Uav Sensing Systems

    Science.gov (United States)

    Aasen, H.

    2017-08-01

    UAVs are increasingly adapted as remote sensing platforms. Together with specialized sensors, they become powerful sensing systems for environmental monitoring and surveying. Spectral data has great capabilities to the gather information about biophysical and biochemical properties. Still, capturing meaningful spectral data in a reproducible way is not trivial. Since a couple of years small and lightweight spectral sensors, which can be carried on small flexible platforms, have become available. With their adaption in the community, the responsibility to ensure the quality of the data is increasingly shifted from specialized companies and agencies to individual researchers or research teams. Due to the complexity of the data acquisition of spectral data, this poses a challenge for the community and standardized protocols, metadata and best practice procedures are needed to make data intercomparable. In November 2016, the ESSEM COST action Innovative optical Tools for proximal sensing of ecophysiological processes (OPTIMISE; http://optimise.dcs.aber.ac.uk/) held a workshop on best practices for UAV spectral sampling. The objective of this meeting was to trace the way from particle to pixel and identify influences on the data quality / reliability, to figure out how well we are currently doing with spectral sampling from UAVs and how we can improve. Additionally, a survey was designed to be distributed within the community to get an overview over the current practices and raise awareness for the topic. This talk will introduce the approach of the OPTIMISE community towards best practises in UAV spectral sampling and present first results of the survey (http://optimise.dcs.aber.ac.uk/uav-survey/). This contribution briefly introduces the survey and gives some insights into the first results given by the interviewees.

  18. Mirror surface metrology and polishing for AXAF/TMA

    International Nuclear Information System (INIS)

    Slomba, A.; Babish, R.; Glenn, P.

    1985-01-01

    The achievement of the derived goals for mirror surface quality on the Advanced X-ray Astrophysics Facility (AXAF), Technology Mirror Assembly (TMA) required a combination of state-of-the-art metrology and polishing techniques. In this paper, the authors summarize the derived goals and cover the main facets of the various metrology instruments employed, as well as the philosophy and technique used in the polishing work. In addition, they show how progress was measured against the goals, using the detailed error budget for surface errors and a mathematical model for performance prediction. The metrology instruments represented a considerable advance on the state-of-the-art and fully satisfied the error budget goals for the various surface errors. They were capable of measuring the surface errors over a large range of spatial periods, from low-frequency figure errors to microroughness. The polishing was accomplished with a computer-controlled process, guided by the combined data from various metrology instruments. This process was also tailored to reduce the surface errors over the full range of spatial periods

  19. What is work? Insights from the evolution of state foster care

    OpenAIRE

    Kirton, Derek

    2013-01-01

    This article focuses on state foster care as a case study in the (re)configuration and negotiation of boundaries between work and non-work. Foster care can be seen as occupying a liminal position between the domains of ‘work’ and ‘family’, requiring management of the tensions presumed to exist between competing value systems. Through a review of research and policy developments, the relevant boundary issues are contextualized and explored, drawing examples from areas such as remuneration, tax...

  20. Technological Advances of Robot Assisted Polishing

    DEFF Research Database (Denmark)

    Lazarev, Ruslan; Top, Søren; Grønbæk, Jens

    The efficient polishing of surfaces is very important in mould and die industry. Fine abrasive processes are widely used in industry for the first steps for the production of tools of high quality in terms of finishing accuracy, form and surface integrity. While manufacturing of most components....... In this study, the influence of polishing parameters and type of polishing media on fine abrasive surface finishing is investigated. Experimental study is covering 2D rotational surfaces that is widespread used in mould and dies industry. Application of it is essential for process intelligent control, condition...... monitoring and quality inspection....

  1. Vehicle choice in aging population: Some insights from a stated preference survey for California

    Energy Technology Data Exchange (ETDEWEB)

    Kavalec, C.

    1999-07-01

    This paper investigates the potential effects that an aging baby boomer generation will have on gasoline use through their vehicle choice decisions. The study uses stated preference data for both conventional and alternative fuel vehicles, and measures the impact of age of survey respondent on the perceived value of vehicle characteristics such as fuel economy, performance, and body style (e.g., car vs. truck). The results suggest the possibility that average fleet fuel economy may improve in the next few years, if survey preferences translate to actual purchase behavior. No clear implications can be drawn regarding the demand for alternative fuel vehicles.

  2. Evaluating the state of quality-improvement science through evidence synthesis: insights from the closing the quality gap series.

    Science.gov (United States)

    McDonald, Kathryn M; Schultz, Ellen M; Chang, Christine

    2013-01-01

    The Closing the Quality Gap series from the Agency for Healthcare Research and Quality summarizes evidence for eight high-priority health care topics: outcomes used in disability research, bundled payment programs, public reporting initiatives, health care disparities, palliative care, the patient-centered medical home, prevention of health care-associated infections, and medication adherence. To distill evidence from this series and provide insight into the "state of the science" of quality improvement (QI). We provided common guidance for topic development and qualitatively synthesized evidence from the series topic reports to identify cross-topic themes, challenges, and evidence gaps as related to QI practice and science. Among topics that examined effectiveness of QI interventions, we found improvement in some outcomes but not others. Implementation context and potential harms from QI activities were not widely evaluated or reported, although market factors appeared important for incentive-based QI strategies. Patient-focused and systems-focused strategies were generally more effective than clinician-focused strategies, although the latter approach improved clinician adherence to infection prevention strategies. Audit and feedback appeared better for targeting professionals and organizations, but not patients. Topic reviewers observed heterogeneity in outcomes used for QI evaluations, weaknesses in study design, and incomplete reporting. Synthesizing evidence across topics provided insight into the state of the QI field for practitioners and researchers. To facilitate future evidence synthesis, consensus is needed around a smaller set of outcomes for use in QI evaluations and a framework and lexicon to describe QI interventions more broadly, in alignment with needs of decision makers responsible for improving quality.

  3. Family Enterprises in Polish Consumers' Mindset in the Light of International Tendencies

    Directory of Open Access Journals (Sweden)

    Joanna Bednarz

    2017-07-01

    Full Text Available Aim/purpose - The main aim of the paper is to fill in the gap in the existing literature as well as to propose a set of specific family enterprises' (FE attributes concerning certain socioeconomic conditions in Poland. The objectives of the article are interrelated with two theses. H1 assumes that in current literature there is a little attention paid to the demand side of the market, particularly to the individual consumers (including young buyers and their attitudes toward FEs. H2 indicates that the perception of Polish FEs changes considerably reflecting the international trends. Design/methodology/approach - The authors studied a consolidated profound review of recent international and Polish publications on FEs. The expert interviews and in-depth individual interviews were conducted. Both empirical studies brought a preliminary insight into overall consumer perception of the FEs in Poland. Findings - For several years Polish buyers have been dynamically changing their mindset, breaking the stereotype of FEs' owners. Nowadays, tradition and quality are two attributes which are associated closely with Polish FEs. Customers indicate that FEs are trustworthy, responsible, solid and dependable. They also highlight the ethnocentric attitude toward these companies - Polishness. All these attributes are evidently appreciated. FEs are correlated with traditional industries and products, especially with groceries, cosmetics, clothes, shoes, jewelry, furniture, windows and doors. Research implications/limitations - The identity of FEs is not always communicated properly. Consumers often cannot ascertain a provenance of their offer as many FEs do not emphasize their family identity. Additionally, on the Polish market, consumers are occasionally misled considering the family ownership of a business. Originality/value/contribution - The studies indicate a set of attributes typical of Polish FEs underpinning their strong identity which should be

  4. The peptide-receptive transition state of MHC-1 molecules: Insight from structure and molecular dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Robinson H.; Mage, M.; Dolan, M.; Wang, R.; Boyd, L.; Revilleza, M.; Natarajan, K.; Myers, N.; Hansen, T.; Margulies, D.

    2012-05-01

    MHC class I (MHC-I) proteins of the adaptive immune system require antigenic peptides for maintenance of mature conformation and immune function via specific recognition by MHC-I-restricted CD8(+) T lymphocytes. New MHC-I molecules in the endoplasmic reticulum are held by chaperones in a peptide-receptive (PR) transition state pending release by tightly binding peptides. In this study, we show, by crystallographic, docking, and molecular dynamics methods, dramatic movement of a hinged unit containing a conserved 3(10) helix that flips from an exposed 'open' position in the PR transition state to a 'closed' position with buried hydrophobic side chains in the peptide-loaded mature molecule. Crystallography of hinged unit residues 46-53 of murine H-2L(d) MHC-I H chain, complexed with mAb 64-3-7, demonstrates solvent exposure of these residues in the PR conformation. Docking and molecular dynamics predict how this segment moves to help form the A and B pockets crucial for the tight peptide binding needed for stability of the mature peptide-loaded conformation, chaperone dissociation, and Ag presentation.

  5. Spectroscopic insights on selfassembly and excited state interactions between rhodamine and phthalocyanine molecules.

    Science.gov (United States)

    Geng, Hao; Zhang, Xian-Fu

    2015-03-15

    The absorption and fluorescence spectra as well as fluorescence lifetimes of tetrasulfonated zinc phthalocyanine ZnPc(SO3Na)4 were measured in the absence and presence of four rhodamine dyes, Rhodamine B (RB), Ethyl rhodamine B (ERB), Rhodamine 6G (R6G), Rhodamine 110 (R110), and Pyronine B (PYB). The ground state complexes of phthalocyanine-(Rhodamine)2 were observed which exhibit new absorption bands. The binding constants are all very large (0.86×10(5)-0.22×10(8) M(-1)), suggesting rhodamine-phthalocyanine pairs are very good combinations for efficient selfassembly. Both the fluorescence intensity and the lifetime values of ZnPc(SO3Na)4 were decreased by the presence of rhodamines. The structural effect of rhodamines on selfassembly is significant. The ground state binding and dynamic quenching capability is PYB>R6G>ERB>RB>R110. The dynamic fluorescence quenching is due to the photoinduced electron transfer (PET). The PET rate constant is very large and in the order of 10(13) M(-1) s(-1), much greater than kf and kic (in the order of 10(8) M(-1) s(-1)), which means that the PET efficiency is almost 100%. Therefore the non-covalent Pc-rhodamine is a very good pair of donor/acceptor for potential efficient solar energy conversion. Copyright © 2014 Elsevier B.V. All rights reserved.

  6. Preliminary insights of the impact of steady state uncertainties on fuel rod response to an RIA

    International Nuclear Information System (INIS)

    Herranz, Luis E.; Huguet, Anne

    2013-01-01

    Nuclear fuel cycles are driven to higher burn-ups under the nowadays more demanding operational conditions. The operational safety limits that ensure the long-term core coolability are set through the analysis of the design basis accidents, RIA scenarios. These analyses are mainly performed through computer codes that encapsulate the present understanding of fuel behavior under such events. They assess safety margins and therefore their accuracy is of utmost interest. Their predictability is extended and validated through separate effect and integral experiments data. Given the complexity of working phenomena under RIA conditions, neither existing thermo-mechanical models nor rod state characterization at the moment of power pulse reflect exactly reality. So, it is essential to know how these deviations influence code predictions. This study illustrates how uncertainties related to pre-transient rod characterization affect the estimates of nuclear fuel behavior during the transient. In order to do so, the RIA scenario of the CIP0-1 test (CABRI program) has been analyzed with FRAPCON-3 (steady state irradiation) and FRAPTRAN 1.4 (transient) codes. The input uncertainties have been propagated through the codes by following a deterministic approach. This work is framed within the CSN-CIEMAT agreement on 'Thermo-Mechanical Behavior of the Nuclear Fuel at High Burnup'. (authors)

  7. The role of alpha-rhythm states in perceptual learning: insights from experiments and computational models

    Science.gov (United States)

    Sigala, Rodrigo; Haufe, Sebastian; Roy, Dipanjan; Dinse, Hubert R.; Ritter, Petra

    2014-01-01

    During the past two decades growing evidence indicates that brain oscillations in the alpha band (~10 Hz) not only reflect an “idle” state of cortical activity, but also take a more active role in the generation of complex cognitive functions. A recent study shows that more than 60% of the observed inter-subject variability in perceptual learning can be ascribed to ongoing alpha activity. This evidence indicates a significant role of alpha oscillations for perceptual learning and hence motivates to explore the potential underlying mechanisms. Hence, it is the purpose of this review to highlight existent evidence that ascribes intrinsic alpha oscillations a role in shaping our ability to learn. In the review, we disentangle the alpha rhythm into different neural signatures that control information processing within individual functional building blocks of perceptual learning. We further highlight computational studies that shed light on potential mechanisms regarding how alpha oscillations may modulate information transfer and connectivity changes relevant for learning. To enable testing of those model based hypotheses, we emphasize the need for multidisciplinary approaches combining assessment of behavior and multi-scale neuronal activity, active modulation of ongoing brain states and computational modeling to reveal the mathematical principles of the complex neuronal interactions. In particular we highlight the relevance of multi-scale modeling frameworks such as the one currently being developed by “The Virtual Brain” project. PMID:24772077

  8. Structure and dynamics of cationic membrane peptides and proteins: Insights from solid-state NMR

    Science.gov (United States)

    Hong, Mei; Su, Yongchao

    2011-01-01

    Many membrane peptides and protein domains contain functionally important cationic Arg and Lys residues, whose insertion into the hydrophobic interior of the lipid bilayer encounters significant energy barriers. To understand how these cationic molecules overcome the free energy barrier to insert into the lipid membrane, we have used solid-state NMR spectroscopy to determine the membrane-bound topology of these peptides. A versatile array of solid-state NMR experiments now readily yields the conformation, dynamics, orientation, depth of insertion, and site-specific protein–lipid interactions of these molecules. We summarize key findings of several Arg-rich membrane peptides, including β-sheet antimicrobial peptides, unstructured cell-penetrating peptides, and the voltage-sensing helix of voltage-gated potassium channels. Our results indicate the central role of guanidinium-phosphate and guanidinium-water interactions in dictating the structural topology of these cationic molecules in the lipid membrane, which in turn account for the mechanisms of this functionally diverse class of membrane peptides. PMID:21344534

  9. Secretomic Insight into Glucose Metabolism of Aspergillus brasiliensis in Solid-State Fermentation.

    Science.gov (United States)

    Volke-Sepulveda, Tania; Salgado-Bautista, Daniel; Bergmann, Carl; Wells, Lance; Gutierrez-Sanchez, Gerardo; Favela-Torres, Ernesto

    2016-10-07

    The genus Aspergillus is ubiquitous in nature and includes various species extensively exploited industrially due to their ability to produce and secrete a variety of enzymes and metabolites. Most processes are performed in submerged fermentation (SmF); however, solid-state fermentation (SSF) offers several advantages, including lower catabolite repression and substrate inhibition and higher productivity and stability of the enzymes produced. This study aimed to explain the improved metabolic behavior of A. brasiliensis ATCC9642 in SSF at high glucose concentrations through a proteomic approach. Online respirometric analysis provided reproducible samples for secretomic studies when the maximum CO 2 production rate occurred, ensuring consistent physiological states. Extracellular extracts from SSF cultures were treated by SDS-PAGE, digested with trypsin, and analyzed by LC-MS/MS. Of 531 sequences identified, 207 proteins were analyzed. Twenty-five were identified as the most abundant unregulated proteins; 87 were found to be up-regulated and 95 were down-regulated with increasing glucose concentration. Of the regulated proteins, 120 were enzymes, most involved in the metabolism of carbohydrates (51), amino acids (23), and nucleotides (9). This study shows the high protein secretory activity of A. brasiliensis under SSF conditions. High glucose concentration favors catabolic activities, while some stress-related proteins and those involved in proteolysis are down-regulated.

  10. The role of alpha-rhythm states in perceptual learning: insights from experiments and computational models

    Directory of Open Access Journals (Sweden)

    Rodrigo eSigala

    2014-04-01

    Full Text Available During the past two decades growing evidence indicates that brain oscillations in the alpha band (~10 Hz not only reflect an ‘idle’ state of cortical activity, but also take a more active role in the generation of complex cognitive functions. A recent study shows that more than 60% of the observed inter-subject variability in perceptual learning can be ascribed to ongoing alpha activity. This evidence indicates a significant role of alpha oscillations for perceptual learning and hence motivates to explore the potential underlying mechanisms. Hence, it is the purpose of this review to highlight existent evidence that ascribes intrinsic alpha oscillations a role in shaping our ability to learn. In the review, we disentangle the alpha rhythm into different neural signatures that control information processing within individual functional building blocks of perceptual learning. We further highlight computational studies that shed light on potential mechanisms regarding how alpha oscillations may modulate information transfer and connectivity changes relevant for learning. To enable testing of those model based hypotheses, we emphasize the need for multidisciplinary approaches combining assessment of behavior and multi-scale neuronal activity, active modulation of ongoing brain states and computational modeling to reveal the mathematical principles of the complex neuronal interactions. In particular we highlight the relevance of multi-scale modeling frameworks such as the one currently being developed by The Virtual Brain project.

  11. Big data on a big new market: Insights from Washington State's legal cannabis market.

    Science.gov (United States)

    Caulkins, Jonathan P; Bao, Yilun; Davenport, Steve; Fahli, Imane; Guo, Yutian; Kinnard, Krista; Najewicz, Mary; Renaud, Lauren; Kilmer, Beau

    2018-07-01

    Voters in eight U.S. states have passed initiatives to legalize large-scale commercial production of cannabis for non-medical use. All plan or require some form of "seed-to-sale" tracking systems, which provide a view of cannabis market activity at a heretofore unimagined level of detail. Legal markets also create a range of new matters for policy makers to address. Publicly available data were obtained on approximately 45 million individually priced items purchased in the 35 million retail transactions that took place during the first two and a half years of Washington State's legal cannabis market. Records include product type (flower, extract, lotion, liquid edible, etc.), product name, price, and potency with respect to multiple cannabinoids, notably THC and CBD. Items sold can be traced back up the supply chain through the store to the processor and producer, to the level of identifying the specific production batch and mother plant, the firm that tested the product, and test results. Data visualization methods are employed to describe spatial-temporal patterns of multiple correlated attributes (e.g., price and potency) broken down by product. Text-analytic methods are used to subdivide the broad category of "extracts for inhalation" into more homogeneous sub-categories. To understand the competitiveness of the legal cannabis market in Washington we calculate the Herfindahl-Hirschman index (HHI) for processors and retailers. Cannabis prices fell steadily and proportionally at the processor and retailer levels. Retail and wholesale price maintained a roughly 3:1 ratio for multiple product types after some initial fluctuations. Although a wide range of edibles are sold, they account for a modest share of consumer spending; extracts for inhalation are a larger and heterogeneous market segment. The HHI indicates the cannabis market is highly competitive at the processor level, but less so for retail markets at the county level. Washington's state-legal cannabis

  12. Insights from the structure of a smallpox virus topoisomerase-DNA transition state mimic

    Science.gov (United States)

    Perry, Kay; Hwang, Young; Bushman, Frederic D.; Van Duyne, Gregory D.

    2010-01-01

    Summary Poxviruses encode their own type IB topoisomerases (TopIBs) which release superhelical tension generated by replication and transcription of their genomes. To investigate the reaction catalyzed viral TopIBs, we have determined the structure of a variola virus topoisomerase-DNA complex trapped as a vanadate transition state mimic. The structure reveals how the viral TopIB enzymes are likely to position the DNA duplex for ligation following relaxation of supercoils and identifies the sources of friction observed in single molecule experiments that argue against free rotation. The structure also identifies a conformational change in the leaving group sugar that must occur prior to cleavage and reveals a mechanism for promoting ligation following relaxation of supercoils that involves a novel Asp-minor groove interaction. Overall, the new structural data support a common catalytic mechanism for the TopIB superfamily but indicate distinct methods for controlling duplex rotation in the small vs. large enzyme subfamilies. PMID:20152159

  13. Jewish problem in the Polish Communist Party

    Directory of Open Access Journals (Sweden)

    Cimek Henryk

    2016-12-01

    Full Text Available Jews accounted for approx. 8-10% of the population of the Second Republic and in the communist movement (Polish Communist Party and Polish Communist Youth Union the rate was approx, 30%, while in subsequent years it much fluctuated. The percentage of Jews was the highest in the authorities of the party and in the KZMP. This had a negative impact on the position of the KPP on many issues, especially in its relation to the Second Republic.

  14. Electrolytic polishing system for space age materials

    International Nuclear Information System (INIS)

    Coons, W.C.; Iosty, L.R.

    1976-01-01

    A simple electrolytic polishing technique was developed for preparing Cr, Co, Hf, Mo, Ni, Re, Ti, V, Zr, and their alloys for structural analysis on the optical microscope. The base electrolyte contains 5g ZnCl 2 and 15g AlCl 3 . 6H 2 O in 200 ml methyl alcohol, plus an amount of H 2 SO 4 depending on the metal being polished. Five etchants are listed

  15. Trace element analysis of nail polishes

    International Nuclear Information System (INIS)

    Misra, G.; Mittal, V.K.; Sahota, H.S.

    1999-01-01

    Instrumental neutron activation analysis (INAA) technique was used to measure the concentrations of various trace elements in nail polishes of popular Indian and foreign brands. The aim of the present experiment was to see whether trace elements could distinguish nail polishes of different Indian and foreign brands from forensic point of view. It was found that cesium can act as a marker to differentiate foreign and Indian brands. (author)

  16. Experimental Polish-Lithuanian Corpus with the Semantic Annotation Elements

    Directory of Open Access Journals (Sweden)

    Danuta Roszko

    2015-06-01

    Full Text Available Experimental Polish-Lithuanian Corpus with the Semantic Annotation Elements In the article the authors present the experimental Polish-Lithuanian corpus (ECorpPL-LT formed for the idea of Polish-Lithuanian theoretical contrastive studies, a Polish-Lithuanian electronic dictionary, and as help for a sworn translator. The semantic annotation being brought into ECorpPL-LT is extremely useful in Polish-Lithuanian contrastive studies, and also proves helpful in translation work.

  17. Atomic substitutions in synthetic apatite; Insights from solid-state NMR spectroscopy

    Science.gov (United States)

    Vaughn, John S.

    Apatite, Ca5(PO4)3X (where X = F, Cl, or OH), is a unique mineral group capable of atomic substitutions for cations and anions of varied size and charge. Accommodation of differing substituents requires some kind of structural adaptation, e.g. new atomic positions, vacancies, or coupled substitutions. These structural adaptations often give rise to important physicochemical properties relevant to a range of scientific disciplines. Examples include volatile trapping during apatite crystallization, substitution for large radionuclides for long-term storage of nuclear fission waste, substitution for fluoride to improve acid resistivity in dental enamel composed dominantly of hydroxylapatite, and the development of novel biomaterials with enhanced biocompatibility. Despite the importance and ubiquity of atomic substitutions in apatite materials, many of the mechanisms by which these reactions occur are poorly understood. Presence of substituents at dilute concentration and occupancy of disordered atomic positions hinder detection by bulk characterization methods such as X-ray diffraction (XRD) and infrared (IR) spectroscopy. Solid-state nuclear magnetic resonance (NMR) spectroscopy is an isotope-specific structural characterization technique that does not require ordered atomic arrangements, and is therefore well suited to investigate atomic substitutions and structural adaptations in apatite. In the present work, solid-state NMR is utilized to investigate structural adaptations in three different types of apatite materials; a series of near-binary F, Cl apatite, carbonate-hydroxylapatite compositions prepared under various synthesis conditions, and a heat-treated hydroxylapatite enriched in 17O. The results indicate that hydroxyl groups in low-H, near binary F,Cl apatite facilitate solid-solution between F and Cl via column reversals, which result in average hexagonal symmetry despite very dilute OH concentration ( 2 mol percent). In addition, 19F NMR spectra indicate

  18. Franciscana strandings on the north coast of Santa Catarina State and insights into birth period

    Directory of Open Access Journals (Sweden)

    Marta Jussara Cremer

    2013-08-01

    Full Text Available http://dx.doi.org/10.5007/2175-7925.2013v26n4p133 Franciscana, Pontoporia blainvillei, is the most threatened small cetacean in the South Atlantic. Accidental captures in fishing nets is the main problem for this species throughout its distribution. Dead franciscanas found along the coast are an important source of information. This work aimed to analyze the records of dead franciscanas found on the northern coast of Santa Catarina, including Babitonga Bay. Between January 2001 and November 2012, 54 franciscana carcasses were recorded, with the highest number (8 individuals in 2011. Fifty-four percent (n=28 of the carcasses were recorded between August and October. Taking into account that this information was not obtained from a systematic effort, it was not possible to consider this as an estimation of mortality. The largest animal was a female, with a total length of 142 cm. Ten recovered animals (18.5% were smaller than 80 cm, and were considered fetuses or calves. These records indicate that the main birthing period for franciscanas in Santa Catarina is between October and January. The findings presented here contribute to our knowledge of franciscana ecology in the state of Santa Catarina.

  19. Franciscana strandings on the north coast of Santa Catarina State and insights into birth period

    Directory of Open Access Journals (Sweden)

    Renan Lopes Paitach

    2013-11-01

    Full Text Available Franciscana, Pontoporia blainvillei, is the most threatened small cetacean in the South Atlantic. Accidental captures in fishing nets is the main problem for this species throughout its distribution. Dead franciscanas found along the coast are an important source of information. This work aimed to analyze the records of dead franciscanas found on the northern coast of Santa Catarina, including Babitonga Bay. Between January 2001 and November 2012, 54 franciscana carcasses were recorded, with the highest number (8 individuals in 2011. Fifty-two percent (n=28 of the carcasses were recorded between August and October. Taking into account that this information was not obtained from a systematic effort, it was not possible to consider this as an estimation of mortality. The largest animal was a female, with a total length of 142 cm. Ten recovered animals (18.5% were smaller than 80 cm, and were considered fetuses or calves. These records indicate that the main birthing period for franciscanas in Santa Catarina is between October and January. The findings presented here contribute to our knowledge of franciscana ecology in the state of Santa Catarina.

  20. Insights about Fall Prevention of Older Adults in the State of Hawai'i.

    Science.gov (United States)

    Yamazaki, Yuka; Hayashida, Cullen T; Yontz, Valerie

    2017-01-01

    The senior population in Hawai'i is growing at a dramatic pace. In the older population, falls and fall-related injuries are leading causes of morbidity and mortality. Moreover, the health care costs for falls are very high. The State of Hawai'i has taken measures to prevent falls through the promotion of medication reviews, vision checks, home assessments, and exercise. However, current published examinations of fall preventive measures have been insufficient, and more research is needed to confirm risk factors, effectiveness of preventive measures, and to explore future objectives. This paper examined the validity of fall risk factors and fall preventive measures for Hawai'i's seniors by conducting mail questionnaire surveys to a sample of seniors using medical alert services from one company in Hawai'i. The results of chi-square analysis suggest that having reduced ability to perform Activities of Daily Living (ADL) and reduced Instrumental Activities of Daily Living (IADL) were associated with a greater risk of falls ( P fall preventions with their family members or friends and health providers compared with those who did not ( P = .048 and .003, respectively). Evidence-based exercise programs for strengthening muscles and controlling physical balance may be needed to improve ADL and IADL. Furthermore, the results suggest that seniors do not accept that they are at risk of falling before they actually fall. Public health providers should consider how they approach seniors, and how they inform them of the importance of fall prevention across the life span.

  1. Photodissociation of quantum state-selected diatomic molecules yields new insight into ultracold chemistry

    Science.gov (United States)

    McDonald, Mickey; McGuyer, Bart H.; Lee, Chih-Hsi; Apfelbeck, Florian; Zelevinsky, Tanya

    2016-05-01

    When a molecule is subjected to a sufficiently energetic photon it can break apart into fragments through a process called ``photodissociation''. For over 70 years this simple chemical reaction has served as a vital experimental tool for acquiring information about molecular structure, since the character of the photodissociative transition can be inferred by measuring the 3D photofragment angular distribution (PAD). While theoretical understanding of this process has gradually evolved from classical considerations to a fully quantum approach, experiments to date have not yet revealed the full quantum nature of this process. In my talk I will describe recent experiments involving the photodissociation of ultracold, optical lattice-trapped, and fully quantum state-resolved 88Sr2 molecules. Optical absorption images of the PADs produced in these experiments reveal features which are inherently quantum mechanical in nature, such as matter-wave interference between output channels, and are sensitive to the quantum statistics of the molecular wavefunctions. The results of these experiments cannot be predicted using quasiclassical methods. Instead, we describe our results with a fully quantum mechanical model yielding new intuition about ultracold chemistry.

  2. Local Government Capacity to Respond to Environmental Change: Insights from Towns in New York State.

    Science.gov (United States)

    Larson, Lincoln R; Lauber, T Bruce; Kay, David L; Cutts, Bethany B

    2017-07-01

    Local governments attempting to respond to environmental change face an array of challenges. To better understand policy responses and factors influencing local government capacity to respond to environmental change, we studied three environmental issues affecting rural or peri-urban towns in different regions of New York State: climate change in the Adirondacks (n = 63 towns), loss of open space due to residential/commercial development in the Hudson Valley (n = 50), and natural gas development in the Southern Tier (n = 62). Our analysis focused on towns' progression through three key stages of the environmental policy process (issue awareness and salience, common goals and agenda setting, policy development and implementation) and the factors that affect this progression and overall capacity for environmental governance. We found that-when compared to towns addressing open space development and natural gas development-towns confronted with climate change were at a much earlier stage in the policy process and were generally less likely to display the essential resources, social support, and political legitimacy needed for an effective policy response. Social capital cultivated through collaboration and networking was strongly associated with towns' policy response across all regions and could help municipalities overcome omnipresent resource constraints. By comparing and contrasting municipal responses to each issue, this study highlights the processes and factors influencing local government capacity to address a range of environmental changes across diverse management contexts.

  3. Laser polishing of additive manufactured Ti alloys

    Science.gov (United States)

    Ma, C. P.; Guan, Y. C.; Zhou, W.

    2017-06-01

    Laser-based additive manufacturing has attracted much attention as a promising 3D printing method for metallic components in recent years. However, surface roughness of additive manufactured components has been considered as a challenge to achieve high performance. In this work, we demonstrate the capability of fiber laser in polishing rough surface of additive manufactured Ti-based alloys as Ti-6Al-4V and TC11. Both as-received surface and laser-polished surfaces as well as cross-section subsurfaces were analyzed carefully by White-Light Interference, Confocal Microscope, Focus Ion Beam, Scanning Electron Microscopy, Energy Dispersive Spectrometer, and X-ray Diffraction. Results revealed that as-received Ti-based alloys with surface roughness more than 5 μm could be reduce to less than 1 μm through laser polishing process. Moreover, microstructure, microhardness and wear resistance of laser-polished zone was investigated in order to examine the thermal effect of laser polishing processing on the substrate of additive manufactured Ti alloys. This proof-of-concept process has the potential to effectively improve the surface roughness of additive manufactured metallic alloy by local polishing method without damage to the substrate.

  4. Conformal polishing approach: Tool footprint analysis

    Directory of Open Access Journals (Sweden)

    José A Dieste

    2016-02-01

    Full Text Available Polishing process is one of the most critical manufacturing processes during a metal part production because it determines the final quality of the product. Free-form surface polishing is a handmade process with lots of rejected parts, scrap generation and time and energy consumption. Two different research lines are being developed: prediction models of the final surface quality parameters and an analysis of the amount of material removed depending on the polishing parameters to predict the tool footprint during the polishing task. This research lays the foundations for a future automatic conformal polishing system. It is based on rotational and translational tool with dry abrasive in the front mounted at the end of a robot. A tool to part concept is used, useful for large or heavy workpieces. Results are applied on different curved parts typically used in tooling industry, aeronautics or automotive. A mathematical model has been developed to predict the amount of material removed in function of polishing parameters. Model has been fitted for different abrasives and raw materials. Results have shown deviations under 20% that implies a reliable and controllable process. Smaller amount of material can be removed in controlled areas of a three-dimensional workpiece.

  5. Interculutral Polish-Chinese QQing

    Directory of Open Access Journals (Sweden)

    Elżbieta Gajek

    2012-12-01

    Full Text Available Working in tandem with the use of information and communication technologies is well-known and frequently used as a method of supporting learning of foreign languages in authentic communication. It is based on a constructivist approach to teaching. In the reported case study Polish and Chinese students discussed in English preprepared topics. The work shows the potential of e-learning at the micro level, as the language and intercultural task is implemented into an academic course without modification of the objectives and learning outcomes of the course. Evaluation carried out at the end of the project indicates that both groups perceived the task as a significant linguistic, cultural and personal experience. They stressed the importance of sharing “culture for culture” as the partner culture was new for most of them. The ability to talk and respond to information which was often strange, from the point of view of their own culture, allowed for learning intercultural competence ̔in action’.

  6. The attractiveness of family medicine among Polish medical students.

    Science.gov (United States)

    Gowin, Ewelina; Horst-Sikorska, Wanda; Michalak, Michał; Avonts, Dirk; Buczkowski, Krzysztof; Lukas, Witold; Korman, Tomasz; Litwiejko, Alicja; Chlabicz, Sławomir

    2014-06-01

    In many developed countries tuning supply and demand of medical doctors is a continuous challenge to meet the ever changing needs of community and individual patients. The long study period for medical doctors creates the opportunity to observe the current career preferences of medical students and evolution in time. To investigate the career choices of Polish students in different stages of their medical education. Medical students at five Polish medical universities were questioned about their career aspirations in the first, third and sixth year. A total of 2020 students were recruited for the survey. Among first year students 17% preferred family medicine as final career option, compared to 20% in the third year, and 30% in the sixth year (significant trend, P family medicine: 71% women versus 62% women in the group with a preference for a non-family medicine orientation (P = 0.008). Medical students rejecting a career as a family doctor stated that the impossibility to work in a hospital environment was the determining factor. The opportunity for professional development seems to be an important determining factor in the choice of a medical specialty in Poland. The proportion of Polish students choosing family medicine increases during their progress in medical education, with one third of students interested in a career in family medicine by year six.

  7. Knowledge of chronic total occlusion among Polish interventional cardiologists.

    Science.gov (United States)

    Bryniarski, Krzysztof L; Zabojszcz, Michał; Dębski, Grzegorz; Marchewka, Jakub; Legutko, Jacek; Surowiec, Sławomir; Siudak, Zbigniew; Żmudka, Krzysztof; Dudek, Dariusz; Bryniarski, Leszek

    2015-01-01

    Chronic total occlusion (CTO) recanalization is indicated in patients with symptoms and evidence of ischemia, but in most cases those types of lesions are still treated medically. In the last few years CTO angioplasty technique has changed dramatically due to considerable advances in techniques and dedicated equipment. An attempt to assess the state of knowledge of technical aspects of CTO angioplasty of coronary arteries among Polish interventional cardiologists. Questionnaire survey performed during two major Polish invasive cardiology workshops. In the study there participated 113 physicians with an average length of work experience of 13 years, most of them cardiologists certified as independent primary operators. The majority of respondents recognized the need of prevention of thrombotic complications through control of activated coagulation time during the CTO procedures. Prevention of renal complications and X-ray protection are also recognized as a significant part of the procedures. The benefits from the use of over-the-wire microcatheters and balloons, the proper choice of dedicated guidewires, contralateral injections and retrograde technique are underestimated. Despite satisfactory knowledge about indications and qualification for the CTO procedure, the awareness of procedural aspects (particularly the retrograde technique) as well as the dedicated CTO equipment among Polish interventional cardiologists is still insufficient.

  8. Marketing Globalisation – Polish Market Experience

    Directory of Open Access Journals (Sweden)

    Robert Nowacki

    2007-09-01

    Full Text Available The beginning of the 21st century has been yielded with an acceleration of transformations occurring in economies of the whole world. These changes relate to all the areas of economic life functioning. The most important manifestation thereof is a reinforcement of competitive phenomena. Among the most important reasons for such a state of affairs, there is mentioned globalisation. The course of its processes forces the organisation operating in the market to undertake adaptive actions. One of them is reorientation of marketing activities. The need to modify the previous marketing concepts results, first of all, from far reaching alterations in the sphere of consumption, just triggered by globalisationís impact. These trends are noticed in all the markets, also in the Polish one. The foreign enterprises operating in it more and more often use the concept of global marketing. This makes us to have reflection on what is the real effectiveness of such actions and what are the possibilities to form oneís competitive position owing to that. The article constitutes an attempt to provide answers to these questions.

  9. Thrombin generation correlates with disease duration in multiple sclerosis (MS): Novel insights into the MS-associated prothrombotic state.

    Science.gov (United States)

    Parsons, Martin Em; O'Connell, Karen; Allen, Seamus; Egan, Karl; Szklanna, Paulina B; McGuigan, Christopher; Ní Áinle, Fionnuala; Maguire, Patricia B

    2017-01-01

    Thrombin is well recognised for its role in the coagulation cascade but it also plays a role in inflammation, with enhanced thrombin generation observed in several inflammatory disorders. Although patients with multiple sclerosis (MS) have a higher incidence of thrombotic disease, thrombin generation has not been studied to date. The aim of this study was to characterise calibrated automated thrombography parameters in patients with relapsing-remitting MS (RRMS) and primary progressive MS (PPMS) in comparison to healthy controls (HCs). Calibrated automated thrombography was performed on platelet poor plasma from 15 patients with RRMS, 15 with PPMS and 19 HCs. We found that patients with RRMS generate thrombin at a significantly faster rate than the less inflammatory subtype, PPMS or HCs. In addition, the speed of thrombin generation was significantly correlated with time from clinical diagnosis in both subtypes. However, in RRMS the rate of thrombin generation was increased with increased time from clinical diagnosis, while in PPMS the rate of thrombin generation decreased with increased time from clinical diagnosis. These data likely reflect the differential active proinflammatory states in each MS subtype and provide novel mechanistic insights into the clinically relevant prothrombotic state observed in these patients.

  10. Smoking characteristics of Polish immigrants in Dublin.

    LENUS (Irish Health Repository)

    Kabir, Zubair

    2008-01-01

    BACKGROUND: This study examined two main hypotheses: a) Polish immigrants\\' smoking estimates are greater than their Irish counterparts (b) Polish immigrants purchasing cigarettes from Poland smoke "heavier" (>\\/= 20 cigarettes a day) when compared to those purchasing cigarettes from Ireland. The study also set out to identify significant predictors of \\'current\\' smoking (some days and everyday) among the Polish immigrants. METHODS: Dublin residents of Polish origin (n = 1,545) completed a previously validated Polish questionnaire in response to an advertisement in a local Polish lifestyle magazine over 5 weekends (July-August, 2007). The Office of Tobacco Control telephone-based monthly survey data were analyzed for the Irish population in Dublin for the same period (n = 484). RESULTS: Age-sex adjusted smoking estimates were: 47.6% (95% Confidence Interval [CI]: 47.3%; 48.0%) among the Poles and 27.8% (95% CI: 27.2%; 28.4%) among the general Irish population (p < 0.001). Of the 57% of smokers (n = 345\\/606) who purchased cigarettes solely from Poland and the 33% (n = 198\\/606) who purchased only from Ireland, 42.6% (n = 147\\/345) and 41.4% (n = 82\\/198) were "heavy" smokers, respectively (p = 0.79). Employment (Odds Ratio [OR]: 2.89; 95% CI: 1.25-6.69), lower education (OR: 3.76; 95%CI: 2.46-5.74), and a longer stay in Ireland (>24 months) were significant predictors of current smoking among the Poles. An objective validation of the self-reported smoking history of a randomly selected sub-sample immigrant group, using expired carbon monoxide (CO) measurements, showed a highly significant correlation coefficient (r = 0.64) of expired CO levels with the reported number of cigarettes consumed (p < 0.0001). CONCLUSION: Polish immigrants\\' smoking estimates are higher than their Irish counterparts, and particularly if employed, with only primary-level education, and are overseas >2 years.

  11. APS 3D: a new benchmark in aspherical polishing

    Science.gov (United States)

    Gauch, Daniel; Mikulic, Dalibor; Veit, Christian

    2017-10-01

    The APS 3D system performs polishing and form correction in one step in order to reduce overall process time, reduce the number of polishing steps required and eliminate the need for highly skilled operators while providing a repeatable polishing process. This new 3D Polishing system yields better surface quality, and a better slope error, automatically determining the optimum speeds, feed rates and polish pressures to achieve a deterministic process based on the required quality parameters input by the operator. The process flow is always the same to ensure consistent quality and target quality values are defined before polishing begins.

  12. Thermal management of metallic surfaces: evaporation of sessile water droplets on polished and patterned stainless steel

    Science.gov (United States)

    Czerwiec, T.; Tsareva, S.; Andrieux, A.; Bortolini, G. A.; Bolzan, P. H.; Castanet, G.; Gradeck, M.; Marcos, G.

    2017-10-01

    This communication focus on the evaporation of sessile water droplets on different states of austenitic stainless steel surfaces: mirror polished, mirror polished and aged and patterned by sputtering. The evolution of the contact angle and of the droplet diameter is presented as a function of time at room temperature. For all the surface states, a constant diameter regime (CCR) is observed. An important aging effect on the contact angle is measured on polished surfaces due to atmospheric contamination. The experimental observations are compared to a quasi-static evaporation model assuming spherical caps. The evolution of the droplet volume as a function of time is almost linear with the evaporation time for all the observed surfaces. This is in accordance with the model prediction for the CCR mode for small initial contact angles. In our experiments, the evaporation time is found to be linearly dependent on the initial contact angle. This dependence is not correctly described by the evaporation model

  13. Polish Academy of Sciences Great Dictionary of Polish [Wielki słownik języka polskiego PAN

    Directory of Open Access Journals (Sweden)

    Piotr Žmigrodzki

    2014-12-01

    Full Text Available The paper describes a lexicographical project involving the development of the newest general dictionary of the Polish language: the Polish Academy of Sciences Great Dictionary of Polish [Wielki słownik języka polskiego PAN]. The project is coordinated by the Institute of Polish Language at the Polish Academy of Sciences and carried out in collaboration with linguists and lexicographers from several other Polish academic centres. The paper offers a brief description of the genesis of the project and the scope of information included in the dictionary, the organisation of work, the life of the dictionary on the Web as well as the plans for the future.

  14. The role of monastic embroidery workshops in the formation of the early modern Polish embroidery

    Directory of Open Access Journals (Sweden)

    Karolina Stanilewicz

    2016-12-01

    Full Text Available The article presents the state of research and the research problems concerning the early modern Polish embroidery and the role of the monastic workshops in its formation. Embroidery was one of the regular occupation in the female congregations. Nuns embroidered for their churches, as well as they took the orders from outside – from male congregations, the higher clergy and the secular customers. Their importance has increased in the 17th century, and in the 18th century nearly all convents dealt with this craft. The preserved embroideries reflect the general stylish trends prevailing in the handicrafts, but they are characterized by greater conservatism. Their level is very varied, from perfect works to very weak and inept ones. Nuns rarely prepared themselves patterns for embroideries, more often they used the services of craftsmen or they were repeating the proven solutions. They certainly used the embroidery pattern books. An important inspiration for them were also patterns of fabrics. While the floral motifs showed high proficiency, in less common figural presentations we often see much incompetence. Vestments decorated with the elaborate symbolic representations are distinguished among them. At this stage of research it seems that the monastic workshops have had a major impact on the prosperity of embroidery in the Republic of Poland and that along with the guilds they developed a certain style and taste. Preserved objects are waiting for being catalogued and for insightful research that let us connect more of them with definite workshops.

  15. Experimental Evaluation of Optically Polished Aluminum Panels on the Deep Space Network's 34 Meter Antenna

    Science.gov (United States)

    Vilnrotter, V.

    2011-01-01

    The potential development of large aperture ground?based "photon bucket" optical receivers for deep space communications has received considerable attention recently. One approach currently under investigation is to polish the aluminum reflector panels of 34?meter microwave antennas to high reflectance, and accept the relatively large spotsize generated by state of?the?art polished aluminum panels. Theoretical analyses of receiving antenna pointing, temporal synchronization and data detection have been addressed in previous papers. Here we describe the experimental effort currently underway at the Deep Space Network (DSN) Goldstone Communications Complex in California, to test and verify these concepts in a realistic operational environment. Two polished aluminum panels (a standard DSN panel polished to high reflectance, and a custom designed aluminum panel with much better surface quality) have been mounted on the 34 meter research antenna at Deep?Space Station 13 (DSS?13), and a remotely controlled CCD camera with a large CCD sensor in a weather?proof container has been installed next to the subreflector, pointed directly at the custom polished panel. The point?spread function (PSF) generated by the Vertex polished panel has been determined to be smaller than the sensor of the CCD camera, hence a detailed picture of the PSF can be obtained every few seconds, and the sensor array data processed to determine the center of the intensity distribution. In addition to estimating the center coordinates, expected communications performance can also been evaluated with the recorded data. The results of preliminary pointing experiments with the Vertex polished panel receiver using the planet Jupiter to simulate the PSF generated by a deep?space optical transmitter are presented and discussed in this paper.

  16. The state of multiple sclerosis: current insight into the patient/health care provider relationship, treatment challenges, and satisfaction

    Science.gov (United States)

    Tintoré, Mar; Alexander, Maggie; Costello, Kathleen; Duddy, Martin; Jones, David E; Law, Nancy; O’Neill, Gilmore; Uccelli, Antonio; Weissert, Robert; Wray, Sibyl

    2017-01-01

    Background Managing multiple sclerosis (MS) treatment presents challenges for both patients and health care professionals. Effective communication between patients with MS and their neurologist is important for improving clinical outcomes and quality of life. Methods A closed-ended online market research survey was used to assess the current state of MS care from the perspective of both patients with MS (≥18 years of age) and neurologists who treat MS from Europe and the US and to gain insight into perceptions of treatment expectations/goals, treatment decisions, treatment challenges, communication, and satisfaction with care, based on current clinical practice. Results A total of 900 neurologists and 982 patients completed the survey, of whom 46% self-identified as having remitting-relapsing MS, 29% secondary progressive MS, and 11% primary progressive MS. Overall, patients felt satisfied with their disease-modifying therapy (DMT); satisfaction related to comfort in speaking with their neurologist and participation in their DMT decision-making process. Patients who self-identified as having relapsing-remitting MS were more likely to be very satisfied with their treatment. Top challenges identified by patients in managing their DMT were cost, side effects/tolerability of treatment, and uncertainty if treatment was working. Half of the patients reported skipping doses, but only 68% told their health care provider that they did so. Conclusion Several important differences in perception were identified between patients and neurologists concerning treatment selection, satisfaction, expectations, goals, and comfort discussing symptoms, as well as treatment challenges and skipped doses. The study results emphasize that patient/neurologist communication and patient input into the treatment decision-making process likely influence patient satisfaction with treatment. PMID:28053511

  17. The state of multiple sclerosis: current insight into the patient/health care provider relationship, treatment challenges, and satisfaction.

    Science.gov (United States)

    Tintoré, Mar; Alexander, Maggie; Costello, Kathleen; Duddy, Martin; Jones, David E; Law, Nancy; O'Neill, Gilmore; Uccelli, Antonio; Weissert, Robert; Wray, Sibyl

    2017-01-01

    Managing multiple sclerosis (MS) treatment presents challenges for both patients and health care professionals. Effective communication between patients with MS and their neurologist is important for improving clinical outcomes and quality of life. A closed-ended online market research survey was used to assess the current state of MS care from the perspective of both patients with MS (≥18 years of age) and neurologists who treat MS from Europe and the US and to gain insight into perceptions of treatment expectations/goals, treatment decisions, treatment challenges, communication, and satisfaction with care, based on current clinical practice. A total of 900 neurologists and 982 patients completed the survey, of whom 46% self-identified as having remitting-relapsing MS, 29% secondary progressive MS, and 11% primary progressive MS. Overall, patients felt satisfied with their disease-modifying therapy (DMT); satisfaction related to comfort in speaking with their neurologist and participation in their DMT decision-making process. Patients who self-identified as having relapsing-remitting MS were more likely to be very satisfied with their treatment. Top challenges identified by patients in managing their DMT were cost, side effects/tolerability of treatment, and uncertainty if treatment was working. Half of the patients reported skipping doses, but only 68% told their health care provider that they did so. Several important differences in perception were identified between patients and neurologists concerning treatment selection, satisfaction, expectations, goals, and comfort discussing symptoms, as well as treatment challenges and skipped doses. The study results emphasize that patient/neurologist communication and patient input into the treatment decision-making process likely influence patient satisfaction with treatment.

  18. Resting-state functional connectivity between right anterior insula and right orbital frontal cortex correlate with insight level in obsessive-compulsive disorder

    Directory of Open Access Journals (Sweden)

    Jie Fan

    2017-01-01

    Full Text Available Few studies have explored the neurobiological basis of insight level in obsessive-compulsive disorder (OCD, though the salience network (SN has been implicated in insight deficits in schizophrenia. This study was then designed to investigate whether resting-state (rs functional connectivity (FC of SN was associated with insight level in OCD patients. We analyzed rs-functional magnetic resonance imaging (fMRI data from 21 OCD patients with good insight (OCD-GI, 19 OCD patients with poor insight (OCD-PI, and 24 healthy controls (HCs. Seed-based whole-brain FC and ROI (region of interest-wise connectivity analyses were performed with seeds/ROIs in the bilateral anterior insula (AI and dorsal anterior cingulate cortex (dACC. The right AI-right medial orbital frontal cortex (mOFC connectivity was found to be uniquely decreased in the OCD-PI group, and the value of this aberrant connectivity correlated with insight level in OCD patients. In addition, we found that the OCD-GI group had significantly increased right AI-left dACC connectivity within the SN, relative to HCs (overall trend for groups: OCD-GI > OCD-PI > HC. Our findings suggest that abnormal right AI-right mOFC FC may mediate insight deficits in OCD, perhaps due to impaired encoding and integration of self-evaluative information about OCD-related beliefs and behaviors. Our findings indicate a SN connectivity dissociation between OCD-GI and OCD-PI patients and support the notion of considering OCD-GI and OCD-PI as two distinct disorder subtypes.

  19. 21 CFR 872.6030 - Oral cavity abrasive polishing agent.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Oral cavity abrasive polishing agent. 872.6030... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6030 Oral cavity abrasive polishing agent. (a) Identification. An oral cavity abrasive polishing agent is a device in paste or powder form...

  20. Chemical Mechanical Polishing Optimization for 4H-SiC

    National Research Council Canada - National Science Library

    Neslen, Craig

    2000-01-01

    .... Preliminary chemical mechanical polishing (CMP) studies of 1 3/8" 4H-SiC wafers were performed in an attempt to identify the polishing parameter values that result in a maximum material removal rate and thus reduce substrate polishing time...

  1. Microbiological flora and nail polish: a brief report.

    Science.gov (United States)

    Rayan, G M; Flournoy, D J; Schlageter, P

    1994-11-01

    Removing nail polish and prosthetic nails from operating room (OR) personnel prior to scrubbing and from patients prior to hand surgery is recommended but not practiced in many hospitals. There is concern that nail polish can act as a vehicle for the transfer of infectious agents. This study was designed to determine the incidence of microbiological flora of nail polish in a clinical setting.

  2. Monitoring of Robot Assisted Polishing through parameters of acoustic emission

    DEFF Research Database (Denmark)

    Lazarev, Ruslan; Top, Søren; Bilberg, Arne

    The polishing process is essential for the surface generation of machine tooling components in advanced manufacturing. While robot assisted polishing is faster and more consistent than manual polishing, it can still consume a significant part of ma- chining time and operator presence time...

  3. Polish Qualitative Sociology: The General Features and Development

    OpenAIRE

    Konecki, Krzysztof Tomasz

    2005-01-01

    The article explores the development of Polish qualitative sociology in Poland by presenting its main intellectual routes and some of the general features of Polish sociology. Romanticism and inductionmethod are crucial elements for the development of this discipline in Poland and contribute to its. unigueness. The role of Florian Znaniecki in creating the Polish qualitative sociology is also underlined. Krzysztof Konecki

  4. Professional Training of Economists at Polish Universities

    Science.gov (United States)

    Ogienko, Olena

    2016-01-01

    Polish experience in professional training of economists at university has been generalized. Structural, content and procedural peculiarities of the training have been defined. It has been proved that key factors for reforming economic education in Poland are globalization, internationalization, integration, technologization and informatization.…

  5. Knowledge Mobilisation in the Polish Education System

    Science.gov (United States)

    Fazlagic, Jan; Erkol, Arif

    2015-01-01

    Poland has made substantial progress in improving the quality of its education system in recent years. This paper aims to describe the situation of the Polish education system from a knowledge management perspective and, to some extent, through innovation policies in education. The many challenges, this paper argues, can be tackled only through…

  6. Sexual Health of Polish Athletes with Disabilities

    Directory of Open Access Journals (Sweden)

    Ryszard Plinta

    2015-06-01

    Full Text Available The purpose of this study was to determine sexual functioning of Polish athletes with disabilities (including paralympians. The study encompassed 218 people with physical disabilities, aged between 18 and 45 (149 men and 69 women. The entire research population was divided into three groups: Polish paralympians (n = 45, athletes with disabilities (n = 126 and non-athletes with disabilities (n = 47. The quality of sexual life of Polish paralympians was measured by using the Polish version of Female Sexual Function Index and International Index of Erectile Function. Clinically significant erectile dysfunctions were most often diagnosed in non-athletes (83.33% with 50% result of severe erectile dysfunctions, followed by athletes and paralympians with comparable results of 56.98% and 54.17% respectively (p = 0.00388. Statistically significant clinical sexual dysfunctions concerned lubrication, orgasm as well as pain domains, and prevailed among female non-athletes (68.42%, 68.42% and 57.89%. Practising sports at the highest level has a favourable effect on the sexuality of men and women with physical disabilities. Men with physical disabilities manifest more sexual disorders than women, an aspect which should be considered by health-care professionals working with people with disabilities.

  7. Directory of Polish Officials: A Reference Aid

    Science.gov (United States)

    1989-04-01

    Jan 86 Deputy Director Mondalski, Janusz Aug 83 Polish Steamship Company (Polski Zegluga Morska ) (PZM) Director Andruczyk, Mieczyslaw Jan...2<> Polski Kosciol Chrzescijan Baptystow 12° Polski Linie Oceaniczne ’"- Polski Towarzystwo Ekonomiczne ’’° Polski Zegluga Morska 102 Polski

  8. Polish students’ opinion about medicinal cannabis

    Directory of Open Access Journals (Sweden)

    Rafał Mazur

    2017-09-01

    Conclusions: Polish students seem to be ready for introduction into medical marijuana and are aware of its therapeutic potential. The majority is in favor of sales in a controlled manner. The task of researchers should be accurate examination of the effectiveness of specific cannabinoids in the treatment of diseases.

  9. An Exploratory Study of the Factors That May Affect Female Consumers’ Buying Decision of Nail Polishes

    Directory of Open Access Journals (Sweden)

    Chen Sun

    2015-06-01

    Full Text Available The objective of this study was to determine what factors female consumers valued more when they buy nail polish. Ninety-eight female consumers participated in a nail polish consumer study at the Sensory Analysis Center, Kansas State University. A questionnaire containing a check-all-that-apply (CATA question, behavior questions and demographic questions was presented to each consumer. In the CATA question, the factors that may affect consumers’ decision to buy a nail polish were asked, including both sensory and non-sensory factors. The frequency in percent for the factors was calculated. Sensory appeal, price and convenience of usage were the top factors that affected consumers’ buying decisions. Consumers valued sensory appeal and convenience of usage; this suggested that a nail polish company’s product development and advertising departments may want to focus on these two areas, primarily. The information presented in this study could help a nail polish company understand more about consumer segmentation and advertising strategy.

  10. 10. national conference of Maria Sklodowska-Curie Polish Radiation Research Society. Abstract of papers

    International Nuclear Information System (INIS)

    1995-01-01

    The 10. national conference of M. Sklodowska-Curie Polish Radiation Research Society has given the opportunity to present novel Polish advisement in all fields of radiation research, e.g. radiation chemistry and biology, radiation processing, environmental study, mathematical modeling and simulation as well as different theoretical study. As a whole it may be treated as a review of actual state of art. The scientific progress since 1992 when the 9. national conference place up to now can be easy assessed on the base of presented material

  11. Patient monitoring in Polish assisted reproductive technology centres

    Directory of Open Access Journals (Sweden)

    Anna Krawczak

    2016-12-01

    Full Text Available In 2014, the Polish non-governmental patient association ‘Our Stork’ (Nasz Bocian introduced the ‘Patient monitoring in ART centres’ research project to gather previously unrecorded information on the situation of infertile people and the provision of assisted reproductive treatment in Poland. When the research project began, assisted reproductive treatment centres were unregulated by the state, a situation that had existed for more than 28 years following the birth of the first Polish test-tube baby in 1987. Patients signed civil contracts, remaining unprotected in terms of safety of treatment and recognition of their rights, and their presumed social position was described by doctors as ‘disciplined patients’ – a reflection of what Michele Foucault described as biopolitics. The research project comprised patient questionnaires (responses from 722 patients provided the basis for the document ‘Patient Recommendations in Infertility Treatment’, analysis of civil contracts and their accuracy in the context of patients’ legal rights in Poland, and in-depth interviews with assisted reproductive treatment centres’ owners, doctors, midwives, and patients to explore patient care. The data reveal that there is a lack of patient-centred care among doctors and medical staff in Poland and that following the passing into law of the 2015 Infertility Act, which introduced state regulation of assisted reproductive treatment centres, the situation for patients worsened.

  12. Surface Roughness and Gloss of Actual Composites as Polished With Different Polishing Systems.

    Science.gov (United States)

    Rodrigues-Junior, S A; Chemin, P; Piaia, P P; Ferracane, J L

    2015-01-01

    This in vitro study evaluated the effect of polishing with different polishing systems on the surface roughness and gloss of commercial composites. One hundred disk-shaped specimens (10 mm in diameter × 2 mm thick) were made with Filtek P-90, Filtek Z350 XT, Opallis, and Grandio. The specimens were manually finished with #400 sandpaper and polished by a single operator using three multistep systems (Superfix, Diamond Pro, and Sof-lex), one two-step system (Polidores DFL), and one one-step system (Enhance), following the manufacturer's instructions. The average surface roughness (μm) was measured with a surface profilometer (TR 200 Surface Roughness Tester), and gloss was measured using a small-area glossmeter (Novo-Curve, Rhopoint Instrumentation, East Sussex, UK). Data were analyzed by two-way analysis of variance and Tukey's test (α=0.05). Statistically significant differences in surface roughness were identified by varying the polishing systems (pGloss was influenced by the composites (pone-step system, Enhance, produced the lowest gloss for all composites. Surface roughness and gloss were affected by composites and polishing systems. The interaction between both also influenced these surface characteristics, meaning that a single polishing system will not behave similarly for all composites. The multistep systems produced higher gloss, while the one-step system produced the highest surface roughness and the lowest gloss of all.

  13. Chemical mechanical glass polishing with cerium oxide: Effect of selected physico-chemical characteristics on polishing efficiency

    Czech Academy of Sciences Publication Activity Database

    Janoš, P.; Ederer, J.; Pilařová, V.; Henych, Jiří; Tolasz, Jakub; Milde, D.; Opletal, T.

    2016-01-01

    Roč. 362, SEP (2016), s. 114-120 ISSN 0043-1648 R&D Projects: GA MŠk(CZ) LM2015073 Institutional support: RVO:61388980 Keywords : Chemical mechanical polishing * Ceria-based polishing powders * Polishing efficienc Subject RIV: CA - Inorganic Chemistry Impact factor: 2.531, year: 2016

  14. The state of multiple sclerosis: current insight into the patient/health care provider relationship, treatment challenges, and satisfaction

    Directory of Open Access Journals (Sweden)

    Tintoré M

    2016-12-01

    Full Text Available Mar Tintoré,1 Maggie Alexander,2 Kathleen Costello,3 Martin Duddy,4 David E Jones,5 Nancy Law,6 Gilmore O’Neill,7 Antonio Uccelli,8 Robert Weissert,9 Sibyl Wray10 1Multiple Sclerosis Centre of Catalonia, Hospital Vall d’Hebron, Barcelona, Spain; 2European Multiple Sclerosis Platform, Brussels, Belgium; 3National Multiple Sclerosis Society, Denver, CO, USA; 4Royal Victoria Infirmary, Newcastle-upon-Tyne, UK; 5Department of Neurology, University of Virginia, Charlottesville, VA, USA; 6Nancy Law Consulting LLC, Parker, CO, USA; 7Biogen, Cambridge, MA, USA; 8Centre of Excellence for Biomedical Research, University of Genoa, Genoa, Italy; 9Department of Neurology, University of Regensburg, Regensburg, Germany; 10Hope Neurology Multiple Sclerosis Center, Knoxville, TN, USA Background: Managing multiple sclerosis (MS treatment presents challenges for both patients and health care professionals. Effective communication between patients with MS and their neurologist is important for improving clinical outcomes and quality of life. Methods: A closed-ended online market research survey was used to assess the current state of MS care from the perspective of both patients with MS (≥18 years of age and neurologists who treat MS from Europe and the US and to gain insight into perceptions of treatment expectations/goals, treatment decisions, treatment challenges, communication, and satisfaction with care, based on current clinical practice. Results: A total of 900 neurologists and 982 patients completed the survey, of whom 46% self-identified as having remitting-relapsing MS, 29% secondary progressive MS, and 11% primary progressive MS. Overall, patients felt satisfied with their disease-modifying therapy (DMT; satisfaction related to comfort in speaking with their neurologist and participation in their DMT decision-making process. Patients who self-identified as having relapsing-remitting MS were more likely to be very satisfied with their treatment

  15. STUDY OF POLISHING AISI 316L WITH STRUCTURED ABRASIVE

    Directory of Open Access Journals (Sweden)

    François GOOSSENS

    2015-05-01

    Full Text Available Finishing process like polishing is usually used to obtain high quality mechanical surface characteristics such as texture and roughness. These operations are mainly handmade and need highly trained operators thus limiting their repeatability and profitability. To optimize the industrialization of the polishing process, it is therefore necessary to modelize the process to built efficient parameter database. The aim of this study is to characterise the polishing of 316L stainless steel with structured abrasive belts. The geometric data of the belts are given, and we then propose a model to determine material removal. An experimental test bench is set up to test this model and characterise the polishing process in terms of forces. It produces samples for different polishing conditions. The different polished surfaces are then analyzed thanks to the roughness and the wettability. Using experimental designs, we are able to validate the proposed model and identify the parameters that influence a polishing operation.

  16. [The Polish adaptation of the public speaking anxiety questionnaire].

    Science.gov (United States)

    Chodkiewicz, Jan; Miniszewska, Joanna

    2015-01-01

    The aim of the study was the Polish adaptation of the shortened Public Speaking Anxiety Questionnaire GFER by Spitznagel and co-workers. GFER is a self-assessment method which consists of 16 statements and is designed to assess emotions, physiological reactions, and thoughts that appear in a situation of public speaking. GFER was used to examine 320 students from Lodz's universities. The State/Trait Anxiety Inventory - STAI by Spielberger, The Hospital Anxiety and Depression Scale by Zigmunt and Snaith and TCI by Cloninger were also used. The Polish version of GFER is a reliable and valid tool. The factor structure is similar to the original structure. As a result of the conducted analyses, there was obtained the 9-item version of the tool, which has a 2-factor structure - factor I: emotional and physiological reactions, factor II: worrying. The results obtained with GFER present a statistically significant correlation with other measures of anxiety and with the dimension of temperament: harm avoidance. The obtained results indicate that GFER may be used in both scientific research and therapeutic practice.

  17. Professional activity of Polish peri- and postmenopausal women.

    Science.gov (United States)

    Żołnierczuk-Kieliszek, Dorota; Janiszewska, Mariola; Mielniczuk, Agata; Dziedzic, Małgorzata A; Firlej, Ewelina

    2016-11-01

    The menopausal transition as one of the stages in women's life can bring many ailments which complicate the accomplishment of professional duties. The situation of women on the Polish job market is determined by many barriers and stereotypes which impede women's access to jobs and professional promotions. The aim of the study was to estimate the professional status and job satisfaction of women aged 40-65. The research was carried out by a survey method, a poll technique in the period from January to March 2016. An original questionnaire consisting of 35 questions was used as a research tool. The analysis of obtained results shows that the arithmetic mean of the age of women in full-time employment was 51.84 years whereas the arithmetic mean of the age of women in part-time or seasonal employment was 52.64. Women aged 45-60 were characterised by a significantly lower job satisfaction than women over 60 years of age. The highest percentage of women in full-time employment lived in large cities. The financial situation of working women determined their job satisfaction. Well-off respondents were more pleased with their jobs than women in a worse financial situation. There is a strong need of education about counteraction of gender and age discrimination on the Polish labour market. The struggle against discrimination requires support on each level of the state administration through the implementation of numerous regulations facilitating the final period and resumption of women's professional activity.

  18. THE CULTURAL RELEVANCE OF INDONESIAN PHRASEOLOGICAL UNITS AS CONTRASTED WITH POLISH

    Directory of Open Access Journals (Sweden)

    Przemysław Wiatrowski

    2015-06-01

    Full Text Available This article discusses Indonesian set phrases, a research area not previously investigated by Polish scholars. The aim is to analyze expressions which reveal the cultural specificity of the Indonesian speech community. Specifically, the author is concerned with two categories of multiword expressions. One of them is lexical combinations which preserve observations characteristic of the Indonesian speech community. These are reflected in a system of lexical connotations drawn upon in the process of semantic motivation of idioms. The other is expressions made up of units which are specific to Indonesian culture. The cultural relevance of Indonesian multi-word combinations is examined against the background of the Polish language. By examining research material derived from dictionaries of phrases and collocations and general dictionaries of the Indonesian language, the author provides insights into the way of thinking and responding to reality which is embedded in the language and in the collective experience of members of the Indonesian community.

  19. Emissions from the Polish power industry

    International Nuclear Information System (INIS)

    Uliasz-Bochenczyk, Alicja; Mokrzycki, Eugeniusz

    2007-01-01

    Poland is a country where power and heat energy production is based on conventional fuel combustion, above all hard coal and lignite. In power plants and combined heat and power plants, fossil fuel combustion results in emitting to the atmosphere first of all SO 2 , NO x , CO, particulate matter, greenhouse gases for instance N 2 O and CO 2 . For many years the Polish power industry has tried to reduce the emission of air contaminants to the atmosphere. The reduction is feasible on account of various methods of emission reduction, which have been advanced and applied for many years. The paper presents conventional fuels used in the Polish professional power industry, as well as the principal emission types occurring there for the last 10 years and the undertaken reduction measures

  20. Chemical polishing of epitoxial silicon wafer

    International Nuclear Information System (INIS)

    Osada, Shohei

    1978-01-01

    SSD telescopes are used for the determination of the kind and energy of charged particles produced by nuclear reactions, and are the equipments combining ΔE counters and E counters. The ΔE counter is a thin SSD which is required to be thin and homogeneous enough to get the high resolution of measurement. The SSDs for ΔE counters have so far been obtained by polishing silicon plates mechanically and chemically or by applying electrolytic polishing method on epitaxial silicon wafers, but it was very hard to obtain them. The creative etching equipment and technique developed this time make it possible to obtain thin SSDs for ΔE counters. The outline of the etching equipment and its technique are described in the report. The etching technique applied for the silicon films for ΔE counters with thickness of about 10 μm was able to be experimentally established in this study. (Kobatake, H.)

  1. Polish normalization of the Body Esteem Scale

    Directory of Open Access Journals (Sweden)

    Małgorzata Lipowska

    2014-02-01

    Full Text Available Background Physical attractiveness plays an important part in one’s social functioning. The interest in one’s own appearance have been documented as widespread among the female population, but over the recent years it is more and more often emphasized that concentrating on body appearance concerns men as well. Franzoi and Shields (1984 created the Body Esteem Scale which allows to qualify the subject’s attitude towards his or her own body. The aim of the study was to create a Polish version of the Body Esteem Scale along with the norms for age and sex clusters. Participants and procedure The normalization sample consisted of 4298 participants: 1865 women aged 16 to 80 (M = 29.92; SD = 12.85 and 2433 men aged 16 to 78 (M = 28.74; SD = 11.50. Education levels among the participants were also controlled for. In order to create a Polish version of the Body Esteem Scale, translation was adopted as the adaptation strategy. Like the original one, the Polish scale comprises 35 items grouped into three gender specific subscales. The subscales for women include Sexual Attractiveness, Weight Concern, and Physical Condition, whereas the body esteem of is examined with regards to Physical Attractiveness, Upper Body Strength, and Physical Condition. Results Reliability of subscales was high both for females (Cronbach’s alpha from 0.80 to 0.89 and males (Cronbach’s alpha from 0.85 to 0.88. The given coefficients of reliability cover the original division into subscales adopted by the authors of BES. Conclusions We confirmed high reliability of the Polish version of the Body Esteem Scale, thus we recommend it as a diagnostic tool. Created norms allowed to refer results obtained in the course of research carried out on people with various disorders (e.g. eating disorders or body dysmorphic disorder with population data for corresponding age brackets.

  2. ROUGHNESS ANALYSIS OF VARIOUSLY POLISHED NIOBIUM SURFACES

    Energy Technology Data Exchange (ETDEWEB)

    Ribeill, G.; Reece, C.

    2008-01-01

    Niobium superconducting radio frequency (SRF) cavities have gained widespread use in accelerator systems. It has been shown that surface roughness is a determining factor in the cavities’ effi ciency and maximum accelerating potential achievable through this technology. Irregularities in the surface can lead to spot heating, undesirable local electrical fi eld enhancement and electron multipacting. Surface quality is typically ensured through the use of acid etching in a Buffered Chemical Polish (BCP) bath and electropolishing (EP). In this study, the effects of these techniques on surface morphology have been investigated in depth. The surface of niobium samples polished using different combinations of these techniques has been characterized through atomic force microscopy (AFM) and stylus profi lometry across a range of length scales. The surface morphology was analyzed using spectral techniques to determine roughness and characteristic dimensions. Experimentation has shown that this method is a valuable tool that provides quantitative information about surface roughness at different length scales. It has demonstrated that light BCP pretreatment and lower electrolyte temperature favors a smoother electropolish. These results will allow for the design of a superior polishing process for niobium SRF cavities and therefore increased accelerator operating effi ciency and power.

  3. Effects of polishing procedures on color stability of composite resins

    Directory of Open Access Journals (Sweden)

    Ahmet Umut Güler

    2009-04-01

    Full Text Available The purpose of this study was to investigate the effect of different polishing methods on color stability of posterior, universal and nanohybrid composite resin restorative materials upon exposure to a staining agent. Twenty-five specimens were prepared for each of 5 different composite resins (Filtek Z250, Filtek P60, Quadrant LC, Grandio and Filtek Supreme. Specimens were divided into 5 groups and different polishing procedures, including polishing discs (Pd, polishing discs then diamond polishing paste (PdP, polishing discs then a liquid polishing system (Biscover (PdB, and combinations of these (PdPB were used. Unpolished specimens served as the control (C. The specimens were stored for 48 h in a coffee solution. The color of all specimens was measured before and after exposure with a colorimeter, and total color change (DE* were calculated. The data were analyzed with a two-way ANOVA and the means were compared by Tukey HSD test (a=0.05. The lowest color difference was observed in the groups PdP and C, while the highest color difference was observed in PdPB, and PdB. When comparing the five different restorative materials, no significant difference was observed between FiltekP60 and FiltekZ250, and these materials demonstrated significantly less color change than Quadrant LC and the nanohybrid materials (Grandio, Filtek Supreme. The posterior (Filtek P60 and universal (Filtek Z250 composite resin restorative materials, which do not contain tetraethyleneglycol dimethacrylate (TEGDMA, were found to be less stainable than the nanohybrid (Grandio, Filtek Supreme and universal (Quadrant LC composite resins, which contain TEGDMA. The use of diamond polishing paste after polishing with polishing discs significantly decreased staining when compared to the groups that used polishing discs alone, for all restorative materials tested. The highest color change values were obtained for the specimens that were polished with the Biscover liquid polish

  4. Wladimir Krzyzanowski, 123 Polish Hero of the Civil War in the USA

    Directory of Open Access Journals (Sweden)

    PIYUK T.G.

    2014-09-01

    Full Text Available The article is dedicated to the young Polish revolutionist Wladimir Krzyzanowski who emigrated from Great Poland to the US after failed uprising in 1846 against Prussia in order to avoid possible arrest. He went to Hamburg, Germany and sailed from there to the United States.W. Krzyzanowski managed to become a successful and prosperous businessman and politician, and he was lucky in his personal life, he married a girl with a name and a significant dowry. He considered slavery not only anachronistic, but also a disgrace to the young state, and at the same time, he admired American democracy and American people. In Washington he recruited the company of Polish immigrants which became one of the first companies of Union Soldiers. Krzyzanowski then moved his company to New York and enlisted more immigrants and soon became a Colonel of the 58th Infantry Division, listed in the official Army Register as the “Polish Legion”. He participated in the Civil War battles of Cross-Keys, Bull Run, Chancellorsville, and Gettysburg. “Polish Legion”, led by Krzyzanowski, made himself famous in the main battle at Gettysburg. Subsequently, the memorial of granite was erected to legion in the immediate vicinity of the city.The author’s attention was attracted by the eccentric personality of the Pole, known in Poland and in America. In her work she explores Krzyzanowski’s life and service to the American people

  5. Work Engagement – A Systematic Review of Polish Research

    Directory of Open Access Journals (Sweden)

    Pollak Anita

    2017-06-01

    Full Text Available Over the past decade work engagement has gained both business and academia attention. With growing number of studies and meta-analyses the concept of work engagement is one of the pillars of positive work and organizational psychology. This systematic review presents the current state of research on work engagement in Poland. Results confirmed that work-engagement studies have not yet reached the threshold to conduct meta-analysis. The review of measurement methods and synthesis of findings allows to identify strengths and gaps in Polish studies. Discussion of limitations and biases in current research is accompanied with urge to overcome them and develop thriving stream of research on work engagement.

  6. The first Polish conference: Special glasses and amorphous materials. Introduction

    International Nuclear Information System (INIS)

    1993-01-01

    The present issue brings a collection of papers submitted to the 1. Polish Conference on special glasses and amorphous materials, held on June 1993 at the University of Mining and Metallurgy in Cracow. It was a survey of the research topics and attainments of the research teams working in this referring to the nature of the glassy state of the matter and the relation between glasses and other amorphous materials, properties of these materials as well as modern methods of their synthesis both at low and high temperatures. Some of the results presented at the Conference have already found application in industry. Here belong, among others, the works on optic fibres. Several new materials which have been recently elaborated may also find interesting and new practical application. (author)

  7. Tribological approach to study polishing of road surface under traffic

    OpenAIRE

    KANE, Malal; DO, Minh Tan

    2007-01-01

    The polishing phenomenon of road pavements under the vehicle traffic constitutes the main mechanism inherent to the loss of skid resistance over time. A better understanding of this phenomenon would allow an improvement of road safety. This study comprises a review of laboratory test and a model simulating the polishing of road surfaces. The laboratory test uses a polishing machine so called 'Wehner-Schulze' which can reproduce the evolution of the road texture from specimens taken directly f...

  8. Polish Phoneme Statistics Obtained On Large Set Of Written Texts

    Directory of Open Access Journals (Sweden)

    Bartosz Ziółko

    2009-01-01

    Full Text Available The phonetical statistics were collected from several Polish corpora. The paper is a summaryof the data which are phoneme n-grams and some phenomena in the statistics. Triphonestatistics apply context-dependent speech units which have an important role in speech recognitionsystems and were never calculated for a large set of Polish written texts. The standardphonetic alphabet for Polish, SAMPA, and methods of providing phonetic transcriptions are described.

  9. Polish Qualitative Sociology: The General Features and Development

    OpenAIRE

    Konecki, Krzysztof Tomasz; Kacperczyk, Anna; Marciniak, Łukasz

    2005-01-01

    Forum Qualitative Sozialforschung / Forum: Qualitative Social Research,2005, 6(3) The article explores the development of Polish qualitative sociology in Poland by presenting its main intellectual routes and some of the general features of Polish sociology. Romanticism and inductionmethod are crucial elements for the development of this discipline in Poland and contribute to its. unigueness. The role of Florian Znaniecki in creating the Polish qualitative sociology is also underlined.

  10. Assessing operability of a novel polisher arrangement using MMS

    International Nuclear Information System (INIS)

    Shor, S.W.W.

    1987-01-01

    A condensate polisher is intended to remove both particulate matter and ionic material from the condensate. Condensate polishers have normally been placed directly in the condensate system downstream of the condensate pumps. This inline location has certain disadvantages. These disadvantages are discussed. Placing the polisher in a sidestream location, where water is removed from the condensate system, pumped through the polisher, and then returned to the condensate system provides a solution to these disadvantages. Several possible types of sidestream installations is described. This has a polisher taking unpolished condensate from one compartment from one compartment of a divided hotwell in a specially modified condenser and returning polished condensate to the other compartment. The polisher is supplied by its own dedicated pumps, which have a head requirement sufficient only to overcome the pressure drop through the polisher circuit at a flow rate of 110% of maximum condensate flow. This concept is very attractive but has not yet been tested even though it is being installed in several new units. A simulation was, therefore, performed using MMS to provide confidence that this particular sidestream polisher arrangement was operationally viable

  11. [Józef Heller-one of organizers of Polish biochemistry in 1942-1973].

    Science.gov (United States)

    Zarebska, Zofia

    2011-01-01

    The article commemorates the activity of Józef Heller starting in 1921 with Jakub Parnas's group in Lvov which investigated the phosphorolysis of glycogen. The unknown events of His biography were disclosed, like military service in the Piłsudski's Legions at the rebirth of the Polish State and, subsequently, during the Nazi occupation of Poland--participation in the clandestine teaching of medical students. In the post-war times Józef Heller undertook teaching of medical students in Wrocław and next in Warsaw. In 1954 He begun to organize the Institute of Biochemistry and Biophysics of the Polish Academy of Sciences--it now continues its activity. Professor Heller initiated the publication in Poland of three major biochemical journals, including Postepy Biochemii (1954). Thanks to His leadership the first Polish Medical Dictionary was published (1981). The article summarizes the pursuit of Józef Heller in various branches of academic life, which were and still are appreciated by subsequent generations of Polish biochemists.

  12. Slower nicotine metabolism among postmenopausal Polish smokers.

    Science.gov (United States)

    Kosmider, Leon; Delijewski, Marcin; Koszowski, Bartosz; Sobczak, Andrzej; Benowitz, Neal L; Goniewicz, Maciej L

    2018-06-01

    A non-invasive phenotypic indicator of the rate of nicotine metabolism is nicotine metabolite ratio (NMR) defined as a ratio of two major metabolites of nicotine - trans-3'-hydroxycotinine/cotinine. The rate of nicotine metabolism has important clinical implications for the likelihood of successful quitting with nicotine replacement therapy (NRT). We conducted a study to measure NMR among Polish smokers. In a cross-sectional study of 180 daily cigarette smokers (42% men; average age 34.6±13.0), we collected spot urine samples and measured trans-3'-hydroxycotinine (3-HC) and cotinine levels with LC-MS/MS method. We calculated NMR (molar ratio) and analyzed variations in NMR among groups of smokers. In the whole study group, an average NMR was 4.8 (IQR 3.4-7.3). The group of women below 51 years had significantly greater NMR compared to the rest of the population (6.4; IQR 4.1-8.8 vs. 4.3; IQR 2.8-6.4). No differences were found among group ages of male smokers. This is a first study to describe variations in nicotine metabolism among Polish smokers. Our findings indicate that young women metabolize nicotine faster than the rest of population. This finding is consistent with the known effects of estrogen to induce CYP2A6 activity. Young women may require higher doses of NRT or non-nicotine medications for most effective smoking cessation treatment. Copyright © 2017 Institute of Pharmacology, Polish Academy of Sciences. Published by Elsevier B.V. All rights reserved.

  13. Plasma electrolytic polishing of metalized carbon fibers

    Directory of Open Access Journals (Sweden)

    Falko Böttger-Hiller

    2016-02-01

    Full Text Available Efficient lightweight structures require intelligent materials that meet versatile functions. Especially, carbon-fiber-reinforced polymers (CFRPs are gaining relevance. Their increasing use aims at reducing energy consumption in many applications. CFRPs are generally very light in weight, while at the same time being extremely stiff and strong (specific strength: CFRPs: 1.3 Nm kg–1, steel: 0.27 Nm kg–1; specific stiffness: CFRPs: 100 Nm kg–1, steel: 25 Nm kg–1. To increase performance and especially functionality of CFRPs, the integration of microelectronic components into CFRP parts is aspired. The functionalization by sensors, actuators and electronics can enable a high lightweight factor and a new level of failure-safety. The integration of microelectronic components for this purpose requires a working procedure to provide electrical contacts for a reliable connection to energy supply and data interfaces. To overcome this challenge, metalized carbon fibers are used. Metalized fibers are, similar to the usual reinforcing fibers, able to be soldered and therefore easy to incorporate into CFRPs. Unfortunately, metalized fibers have to be pre-treated by flux-agents. Until now, there is no flux which is suitable for mass production without destroying the polymer of the CFRP. The process of plasma electrolytic polishing (PeP could be an option, but is so far not available for copper. Thus, in this study, plasma electrolytic polishing is transferred to copper and its alloys. To achieve this, electrolytic parameters as well as the electrical setup are adapted. It can be observed that the gloss and roughness can be adjusted by means of this procedure. Finally, plasma electrolytic polishing is used to treat thin copper layers on carbon fibers.

  14. An Unbiased View of the History of Polish Medical Physics by a Senior Polish Medical Physicist

    International Nuclear Information System (INIS)

    Chomicki, O. A.

    2008-01-01

    Here is a story told by Maria Sklodowska-Curie at the meeting of the International Committee of Intellectual Cooperation in 1921: 'In a free literary competition on the role and importance of elephants the Englishman's story was 'My adventures while shooting elephants in South Africa', the Frenchman was more concerned with 'The sexual and erotic life of elephants', while the Polish approach was invariably 'The elephant versus Poland's national independence', which seemed quite understandable in the light of over 120 years when Poland was partitioned and lost its independence. Since then this saying has become proverbial and came to express the unmistakably Polish tendency to see everything in terms of Polish interests. In my remarks and reminiscences on the history of the Polish Society of Medical Physics you will quickly recognize the same tendency. First, I will, among other things, try to open some old cupboards to 'produce good [things] from the store of good' (Matthew 12:35), especially concerning the first few years of the activity in medical physics in Poland, and second, I will draw some conclusions and/or offer suggestions based on what a senior medical physicist has seen for more than 50 years of his activity in this field. (author)

  15. Terminology extraction from medical texts in Polish.

    Science.gov (United States)

    Marciniak, Małgorzata; Mykowiecka, Agnieszka

    2014-01-01

    Hospital documents contain free text describing the most important facts relating to patients and their illnesses. These documents are written in specific language containing medical terminology related to hospital treatment. Their automatic processing can help in verifying the consistency of hospital documentation and obtaining statistical data. To perform this task we need information on the phrases we are looking for. At the moment, clinical Polish resources are sparse. The existing terminologies, such as Polish Medical Subject Headings (MeSH), do not provide sufficient coverage for clinical tasks. It would be helpful therefore if it were possible to automatically prepare, on the basis of a data sample, an initial set of terms which, after manual verification, could be used for the purpose of information extraction. Using a combination of linguistic and statistical methods for processing over 1200 children hospital discharge records, we obtained a list of single and multiword terms used in hospital discharge documents written in Polish. The phrases are ordered according to their presumed importance in domain texts measured by the frequency of use of a phrase and the variety of its contexts. The evaluation showed that the automatically identified phrases cover about 84% of terms in domain texts. At the top of the ranked list, only 4% out of 400 terms were incorrect while out of the final 200, 20% of expressions were either not domain related or syntactically incorrect. We also observed that 70% of the obtained terms are not included in the Polish MeSH. Automatic terminology extraction can give results which are of a quality high enough to be taken as a starting point for building domain related terminological dictionaries or ontologies. This approach can be useful for preparing terminological resources for very specific subdomains for which no relevant terminologies already exist. The evaluation performed showed that none of the tested ranking procedures were

  16. Original article Multidimensional versus unidimensional models of emotional contagion: the Emotional Contagion Scale in a Polish sample

    Directory of Open Access Journals (Sweden)

    Monika Wróbel

    2014-07-01

    Full Text Available Background The Emotional Contagion Scale (ECS measures individual differences in susceptibility to catching emotions expressed by others. Although initially the scale was reported to have a unidimensional structure, recent validation studies have suggested that the concept of emotional contagion is multidimensional. The aim of the study was therefore to test whether the structure of the ECS in a Polish sample corresponds with that observed for other non-English speaking populations. Participants and procedure The scale, translated into Polish, was completed by 633 university students in four independent samples. To investigate the factor structure of the ECS, confirmatory factor analyses of five alternative models were conducted. Results The results supported a multifaceted solution, which confirmed that susceptibility to emotional contagion may be differentiated not only across positive vs. negative states but also across discrete emotions. Moreover, the verification of internal consistency, test-retest reliability and construct validity of the Polish version indicated that its parameters are acceptable and comparable with the characteristics of other adaptations. Conclusions The Polish ECS, together with other adaptations of the scale, shows that the construct developed in the United States can be successfully measured in other cultural contexts. Thus, the Polish version can be treated as a useful tool for measuring individual differences in susceptibility to emotional contagion.

  17. The development of market power in the Polish power generation sector: A 10-year perspective

    International Nuclear Information System (INIS)

    Kamiński, Jacek

    2012-01-01

    The paper examines how and to which extent consolidation in the Polish power generation sector has affected the potential for market power over the last 10 years. Although this sector has been undergoing liberalisation (privatisation, introduction of TPA regulations and competition etc.), the consolidation efforts shown by Polish governments have resulted in a significant increase in concentration of both installed capacity and production. The methodology applied in this study includes typical ex-post structural and behavioural measures employed to estimate potential for market power, namely: concentration ratios (for the largest and the three largest suppliers), the Herfindahl–Hirschman Index, entropy, Supply Margin Assessment, the Residual Supply Index and the Lerner Index. Furthermore, an analysis based on the Gini coefficient was employed to obtain an insight into inequalities. The results of this study show that governmental decisions led to a significant increase in the potential to exercise market power held by key power generation companies. Of key importance was the 2007 consolidation, resulting in an increase in the HHI to 1374 (in terms of installed capacity) and 1945 (in terms of electricity production). This consolidation resulted in the creation of the first Pivotal Supplier in the Polish power generation sector in 2008. - Highlights: ► Market power analysis based on structural and behavioural indices was carried out for the Polish power sector. ► Governmental policy resulted in significant increase in concentration of both installed capacity and generation. ► Increase in the Lerner Index of brown coal-based generation and decrease of the hard coal-based one were observed.

  18. Professional activity of Polish peri- and postmenopausal women

    Directory of Open Access Journals (Sweden)

    Dorota Żołnierczuk-Kieliszek

    2016-09-01

    Full Text Available Introduction: The menopausal transition as one of the stages in women’s life can bring many ailments which complicate the accomplishment of professional duties. The situation of women on the Polish job market is determined by many barriers and stereotypes which impede women’s access to jobs and professional promotions. Material and methods : The aim of the study was to estimate the professional status and job satisfaction of women aged 40-65. The research was carried out by a survey method, a poll technique in the period from January to March 2016. An original questionnaire consisting of 35 questions was used as a research tool. Results: The analysis of obtained results shows that the arithmetic mean of the age of women in full-time employment was 51.84 years whereas the arithmetic mean of the age of women in part-time or seasonal employment was 52.64. Women aged 45-60 were characterised by a significantly lower job satisfaction than women over 60 years of age. The highest percentage of women in full-time employment lived in large cities. The financial situation of working women determined their job satisfaction. Well-off respondents were more pleased with their jobs than women in a worse financial situation. Conclusions : There is a strong need of education about counteraction of gender and age discrimination on the Polish labour market. The struggle against discrimination requires support on each level of the state administration through the implementation of numerous regulations facilitating the final period and resumption of women’s professional activity.

  19. Structural Insights of the Cysteine Protease Heynein from Induction and Characterization of Non-native Intermediate States

    Directory of Open Access Journals (Sweden)

    Basant K. Patel

    2010-12-01

    Full Text Available Cysteine proteases are vital to cell physiology and many plants secrete these proteases for defense purposes. Many recent studies have reported unusually high stabilities for several plant cysteine proteases which possibly enable these proteases to function under adverse environmental conditions. Here, we have examined the conformational features of a new plant cysteine protease heynein using spectroscopic tools to understand the basis for its robust functional stability. The studies revealed structural integrity over a wide range of pH (2.5-12.0, temperature (65 oC and urea (8M. However, at pH 2.0, the protein gets acid-unfolded (UA -state with exposed hydrophobic patches, which upon addition of more protons (pH 0.5 or anions (0.5 M KCl and 0.2 M Na2 SO4 yields conformationally distinct refolded intermediates respectively termed: A-, I 1 - and I 2 -states. Strikingly, a high methanol level drives the UA -state into a predominantly -sheet rich conformation (O-state. We observed three-state unfolding kinetics of the I 2 -state by urea, possibly suggesting presence of two domains in the heynein molecule.

  20. The Czechoslovak-Polish Club in Brno (1925–1939)

    Czech Academy of Sciences Publication Activity Database

    Baron, Roman

    2011-01-01

    Roč. 3, č. 1 (2011), s. 43-64 ISSN 1803-6546 Institutional research plan: CEZ:AV0Z80150510 Keywords : Czechoslovak-Polish solidarity * Czechoslovak-Polish relations * Brno * associations * Interwar Period Subject RIV: AB - History

  1. Phonematic translation of Polish texts by the neural network

    International Nuclear Information System (INIS)

    Bielecki, A.; Podolak, I.T.; Wosiek, J.; Majkut, E.

    1996-01-01

    Using the back propagation algorithm, we have trained the feed forward neural network to pronounce Polish language, more precisely to translate Polish text into its phonematic counterpart. Depending on the input coding and network architecture, 88%-95% translation efficiency was achieved. (author)

  2. Note on the polishing of small spheres of ferrimagnetic materials

    Energy Technology Data Exchange (ETDEWEB)

    Grunberg, J. G.; Antier, G. [Centre d' etudes nucleaires de Grenoble - C.E.N.G. (France); Seiden, P. E. [Institut Fourier, Universite de Grenoble (France)

    1961-07-01

    This note describes a simple and rapid method that we have used for obtaining a high degree of polish on spheres of ferrimagnetic materials. A high surface polish is of particular importance if one desires to perform ferrimagnetic resonance experiments on very narrow linewidth materials such as Yttrium Iron Garnet. It is not possible to obtain the very narrow linewidths without polishing the sample with a very fine abrasive such as 'Linde A'. Although the methods presently used for the fine polishing of ferrite spheres give satisfactory results, the method described here is of particular interest because of its simplicity and speed. For example with the air-jet tumbling technique it can take as long as three days of polishing to obtain an acceptable surface while our method will give the same results in one to two hours. (author)

  3. Energy metabolism in Mycobacterium gilvum PYR-GCK: insights from transcript expression analyses following two states of induction.

    Directory of Open Access Journals (Sweden)

    Abimbola Comfort Badejo

    Full Text Available Mycobacterium gilvum PYR-GCK, a pyrene degrading bacterium, has been the subject of functional studies aimed at elucidating mechanisms related to its outstanding pollutant bioremediation/biodegradation activities. Several studies have investigated energy production and conservation in Mycobacterium, however, they all focused on the pathogenic strains using their various hosts as induction sources. To gain greater insight into Mycobacterium energy metabolism, mRNA expression studies focused on respiratory functions were performed under two different conditions using the toxic pollutant pyrene as a test substrate and glucose as a control substrate. This was done using two transcriptomic techniques: global transcriptomic RNA-sequencing and quantitative Real-Time PCR. Growth in the presence of pyrene resulted in upregulated expression of genes associated with limited oxygen or anaerobiosis in M. gilvum PYR-GCK. Upregulated genes included succinate dehydrogenases, nitrite reductase and various electron donors including formate dehydrogenases, fumarate reductases and NADH dehydrogenases. Oxidative phosphorylation genes (with respiratory chain complexes I, III -V were expressed at low levels compared to the genes coding for the second molecular complex in the bacterial respiratory chain (fumarate reductase; which is highly functional during microaerophilic or anaerobic bacterial growth. This study reveals a molecular adaptation to a hypoxic mode of respiration during aerobic pyrene degradation. This is likely the result of a cellular oxygen shortage resulting from exhaustion of the oxygenase enzymes required for these degradation activities in M. gilvum PYR-GCK.

  4. Chemical polishing of partially oxidized T-111 alloy

    International Nuclear Information System (INIS)

    Teaney, P.E.

    1974-01-01

    The specimens were pressure-mounted in Bakelite and ground through 600 grit on silicon carbide papers. The specimens were rough-polished on a vibratory polisher for 4 to 6 h, using a water slurry of one micron alumina on Texmet, followed by 0.3-μ alumina on Texmet overnight. Final polishing was accomplished by continuous swabbing with a chemical polish. A chemical polish consisting of ten parts lactic acid, four parts nitric acid, and four parts hydrofluoric acid worked well for the T-111 parent material specimens; however, in the partially oxidized specimens, considerable pitting and staining occurred in the oxygen-affected zone and in the transition zone between the oxygen-affected zone and the parent material. A chemical polish was developed for the partially oxidized specimens by adjusting the ratio of the acids to ten parts lactic acid, two parts nitric acid, and two parts hydrofluoric acid. This slowed the chemical attack on the oxygen-affected zone considerably and, with continuous swabbing, the pitting and stain could be avoided. The specimens were rinsed and checked occasionally on the metallograph to determine when the proper polish had been obtained. Some specimens required intermittent polishing times up to 1 / 2 hour. No relationship could be established between the oxygen content of the specimen and the time required for chemical polishing in the partially oxidized specimens. However, the microstructure of the transition zone was the most difficult to obtain, and specimens with uniform reaction zones across the width of the specimen polished quicker than those with the transition zone

  5. Photoisomers of Azobenzene Star with a Flat Core: Theoretical Insights into Multiple States from DFT and MD Perspective.

    Science.gov (United States)

    Koch, Markus; Saphiannikova, Marina; Santer, Svetlana; Guskova, Olga

    2017-09-21

    This study focuses on comparing physical properties of photoisomers of an azobenzene star with benzene-1,3,5-tricarboxamide core. Three azobenzene arms of the molecule undergo a reversible trans-cis isomerization upon UV-vis light illumination giving rise to multiple states from the planar all-trans one, via two mixed states to the kinked all-cis isomer. Employing density functional theory, we characterize the structural and photophysical properties of each state indicating a role the planar core plays in the coupling between azobenzene chromophores. To characterize the light-triggered switching of solvophilicity/solvophobicity of the star, the difference in solvation free energy is calculated for the transfer of an azobenzene star from its gas phase to implicit or explicit solvents. For the latter case, classical all-atom molecular dynamics simulations of aqueous solutions of azobenzene star are performed employing the polymer consistent force field to shed light on the thermodynamics of explicit hydration as a function of the isomerization state and on the structuring of water around the star. From the analysis of two contributions to the free energy of hydration, the nonpolar van der Waals and the electrostatic terms, it is concluded that isomerization specificity largely determines the polarity of the molecule and the solute-solvent electrostatic interactions. This convertible hydrophilicity/hydrophobicity together with readjustable occupied volume and the surface area accessible to water, affects the self-assembly/disassembly of the azobenzene star with a flat core triggered by light.

  6. Experimental Evaluation of the "Polished Panel Optical Receiver" Concept on the Deep Space Network's 34 Meter Antenna

    Science.gov (United States)

    Vilnrotter, Victor A.

    2012-01-01

    The potential development of large aperture ground-based "photon bucket" optical receivers for deep space communications has received considerable attention recently. One approach currently under investigation proposes to polish the aluminum reflector panels of 34-meter microwave antennas to high reflectance, and accept the relatively large spotsize generated by even state-of-the-art polished aluminum panels. Here we describe the experimental effort currently underway at the Deep Space Network (DSN) Goldstone Communications Complex in California, to test and verify these concepts in a realistic operational environment. A custom designed aluminum panel has been mounted on the 34 meter research antenna at Deep-Space Station 13 (DSS-13), and a remotely controlled CCD camera with a large CCD sensor in a weather-proof container has been installed next to the subreflector, pointed directly at the custom polished panel. Using the planet Jupiter as the optical point-source, the point-spread function (PSF) generated by the polished panel has been characterized, the array data processed to determine the center of the intensity distribution, and expected communications performance of the proposed polished panel optical receiver has been evaluated.

  7. The diagnosis and management of food allergies. Position paper of the Food Allergy Section the Polish Society of Allergology.

    Science.gov (United States)

    Bartuzi, Zbigniew; Kaczmarski, Maciej; Czerwionka-Szaflarska, Mieczysława; Małaczyńska, Teresa; Krogulska, Aneta

    2017-10-01

    The paper concerns the current position of the Polish Society of Allergology Food Allergy Section on the diagnosis and management of food allergies. The aim of this position is to provide evidence-based recommendations on the diagnosis and management of patients with allergic hypersensitivity to foods. This position statement includes a systematic review of studies in three areas, namely, the epidemiology, diagnosis and management of food allergies. While taking into account the specific Polish setting, in this publication we also used the current European Academy of Allergy and Clinical Immunology (EAACI) position paper and other current position statements, including those of the United States National Institute of Allergy and Infectious Diseases (NIAID).

  8. Abstracts Book of 42. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry

    International Nuclear Information System (INIS)

    1999-01-01

    Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry is the most important chemical forum of Polish chemists organised annually. The state of art of many fundamental and applied investigations have been presented and discussed. The following scientific sessions and microsymposia have been proposed: plenary session, analytical chemistry, inorganic chemistry, organic chemistry, chemistry and environment, chemistry and technology of polymers, chemistry didactics, electrochemistry, young scientists forum, chemical technology, chemical engineering, high energetics materials, computers in research and teaching of chemistry, structure modelling and polymer properties, silicon-organic compounds

  9. Summaries of the 40. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry

    International Nuclear Information System (INIS)

    1997-01-01

    Annual 40. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry has been held in Gdansk on 22-26 September 1997. The most valuable scientific results obtained in Polish Laboratories have been presented in 22 main sections and 7 symposia directed especially at following subjects: analytical chemistry, biochemistry, solid state chemistry and material science, physical chemistry, heteroorganic and coordination chemistry, medical and pharmaceutical chemistry, metalorganic chemistry, inorganic and organic chemistry, polymers chemistry, chemistry and environment protection, theoretical chemistry, chemical didactics, photochemistry, radiation chemistry and chemical kinetics, chemical engineering, catalysis, crystallochemistry, chemical technology, electrochemistry, and instrumental methods

  10. Antigenic typing Polish isolates of canine parvovirus

    Energy Technology Data Exchange (ETDEWEB)

    Mizak, B. [National Veterinary Research Institute, Pulawy (Poland); Plucienniczak, A. [Polish Academy ofd Sciences. Microbiology and Virology Center, Lodz (Poland)

    1995-12-31

    Polish strains of canine parvovirus isolated between 1982 and 1993 were examined to determine the extent to which the virus has evolved antigenically and genetically over eleven years. Two CPV isolates obtained in Warsaw in 1982 and Pulawy in 1993, were examined using monoclonal antibody typing, restriction analysis and sequencing VP-2 protein gene. Five other isolates from Warsaw and Pulawy were tested with the panel of monoclonal antibodies specific to CPV-2, CPV-2a and common for canine parvovirus, feline panleukopenia virus and milk enteritis virus. Results of the studies demonstrated that all isolates tested represented CPV-2a antigenic type. Rapid antigenic strain replacement recorded by Parrish and Senda in the U.S.A and Japan was not confirmed in Poland. (author). 30 refs, 2 tabs.

  11. Food patterns of Polish older people

    DEFF Research Database (Denmark)

    Wadolowska, L.; Danowska-Oziewicz, M.; Niedzwiedzka, E.

    2006-01-01

    Food patterns of Polish older people were separated and described. The research included 422 people aged 65+ years, living in 5 geographical locations. Participants of the study were selected in quota sampling. Criteria for recruitment included sex, age (65-^74 or 75+ years) and family status...... (living alone or living with other people). Respondents were asked questions about consumption of 55 food products. The factor analysis allowed for separating 21 food patterns. They included from 1 to 3 groups of products, intake of which was mutually dependant. Big number of separated food patterns...... and small number of products fonning joint food patterns speak in advocacy of relatively small reciprocal relationship between different food items consumed by the seniors in Poland....

  12. Attitudes of Polish Consumers Toward Experiential Marketing

    Directory of Open Access Journals (Sweden)

    Monika Skorek

    2017-01-01

    Full Text Available Purpose: The experience economy is a concept that can be defned as a new way of perceiving the market offer of an enterprise, focusing on the customer experience. Enterprises, both in the production and service industries, are becoming similar to one another on a massive scale, which makes it increasingly diffcult to stand out. The response to this can be to offer the consumer an unforgettable experience related to a product or service provided by a company. Methodology: This study analysed the results of qualitative research on the attitudes and opinions of Polish consumers on experience marketing. Results/fndings: The results showed that participants of the study were prepared to transition from the economy based on products or services to an economy based on experiences at a moderate level. They declared a willingness to participate in experiences offered by companies but at the same time focus on the cost and utility of them

  13. Antigenic typing Polish isolates of canine parvovirus

    International Nuclear Information System (INIS)

    Mizak, B.; Plucienniczak, A.

    1995-01-01

    Polish strains of canine parvovirus isolated between 1982 and 1993 were examined to determine the extent to which the virus has evolved antigenically and genetically over eleven years. Two CPV isolates obtained in Warsaw in 1982 and Pulawy in 1993, were examined using monoclonal antibody typing, restriction analysis and sequencing VP-2 protein gene. Five other isolates from Warsaw and Pulawy were tested with the panel of monoclonal antibodies specific to CPV-2, CPV-2a and common for canine parvovirus, feline panleukopenia virus and milk enteritis virus. Results of the studies demonstrated that all isolates tested represented CPV-2a antigenic type. Rapid antigenic strain replacement recorded by Parrish and Senda in the U.S.A and Japan was not confirmed in Poland. (author). 30 refs, 2 tabs

  14. Insight on the energy in the United States; Apercus sur l'energie aux Etats-Unis

    Energy Technology Data Exchange (ETDEWEB)

    Jamet, Ph

    2006-11-15

    This document recapitulates the main characteristics and the key data of the energy in the United States (fossil energies, renewable energies, electric power production). The main american strategies are then described as the actions at the international scale during the last five years. The main data of the research programs in the energy domain are presented and the possible consequences of the government change at the Congress are analyzed. (A.L.B.)

  15. Working memory capacity and the functional connectome - insights from resting-state fMRI and voxelwise centrality mapping.

    Science.gov (United States)

    Markett, Sebastian; Reuter, Martin; Heeren, Behrend; Lachmann, Bernd; Weber, Bernd; Montag, Christian

    2018-02-01

    The functional connectome represents a comprehensive network map of functional connectivity throughout the human brain. To date, the relationship between the organization of functional connectivity and cognitive performance measures is still poorly understood. In the present study we use resting-state functional magnetic resonance imaging (fMRI) data to explore the link between the functional connectome and working memory capacity in an individual differences design. Working memory capacity, which refers to the maximum amount of context information that an individual can retain in the absence of external stimulation, was assessed outside the MRI scanner and estimated based on behavioral data from a change detection task. Resting-state time series were analyzed by means of voxelwise degree and eigenvector centrality mapping, which are data-driven network analytic approaches for the characterization of functional connectivity. We found working memory capacity to be inversely correlated with both centrality in the right intraparietal sulcus. Exploratory analyses revealed that this relationship was putatively driven by an increase in negative connectivity strength of the structure. This resting-state connectivity finding fits previous task based activation studies that have shown that this area responds to manipulations of working memory load.

  16. Reducing Health Inequities in the United States: Insights and Recommendations from the National Heart, Lung, and Blood Institute’s Health Inequities Think Tank Meeting

    Science.gov (United States)

    Sampson, Uchechukwu K.A.; Kaplan, Robert M.; Cooper, Richard S.; Diez Roux, Ana V.; Marks, James S.; Engelgau, Michael M.; Peprah, Emmanuel; Mishoe, Helena; Boulware, L. Ebony; Felix, Kaytura L.; Califf, Robert M.; Flack, John M.; Cooper, Lisa A.; Gracia, J. Nadine; Henderson, Jeffrey A.; Davidson, Karina W.; Krishnan, Jerry A.; Lewis, Tené T.; Sanchez, Eduardo; Luban, Naomi L.; Vaccarino, Viola; Wong, Winston F.; Wright, Jackson T.; Meyers, David; Ogedegbe, Olugbenga G.; Presley-Cantrell, Letitia; Chambers, David A.; Belis, Deshirée; Bennett, Glen C.; Boyington, Josephine E; Creazzo, Tony L.; de Jesus, Janet M.; Krishnamurti, Chitra; Lowden, Mia R.; Punturieri, Antonello; Shero, Susan T.; Young, Neal S.; Zou, Shimian; Mensah, George A.

    2016-01-01

    The National, Heart, Lung, and Blood Institute convened a Think Tank meeting to obtain insight and recommendations regarding the objectives and design of the next generation of research aimed at reducing health inequities in the United States. The panel recommended several specific actions, including: 1) Embrace broad and inclusive research themes; 2) Develop research platforms that optimize the ability to conduct informative and innovative research, and promote systems science approaches; 3) Develop networks of collaborators and stakeholders, and launch transformative studies that can serve as benchmarks; 4) Optimize the use of new data sources, platforms, and natural experiments; and 5) develop unique transdisciplinary training programs to build research capacity. Confronting health inequities will require engaging multiple disciplines and sectors (including communities), using systems science, and intervening through combinations of individual, family, provider, health system, and community-targeted approaches. Details of the panel’s remarks and recommendations are provided in this report. PMID:27470459

  17. New perspectives in hydrodynamic radial polishing techniques for optical surfaces

    Science.gov (United States)

    Ruiz, Elfego; Sohn, Erika; Luna, Esteban; Salas, Luis; Cordero, Alberto; González, Jorge; Núñez, Manuel; Salinas, Javier; Cruz-González, Irene; Valdés, Jorge; Cabrera, Victor; Martínez, Benjamín

    2004-09-01

    In order to overcome classic polishing techniques, a novel hydrodynamic radial polishing tool (HyDRa) is presented; it is useful for the corrective lapping and fine polishing of diverse materials by means of a low-cost abrasive flux and a hydrostatic suspension system that avoids contact of the tool with the working surface. This tool enables the work on flat or curved surfaces of currently up to two and a half meters in diameter. It has the advantage of avoiding fallen edges during the polishing process as well as reducing tool wear out and deformation. The functioning principle is based on the generation of a high-velocity, high-pressure, abrasive emulsion flux with radial geometry. The polishing process is repeatable by means of the control of the tool operational parameters, achieving high degrees of precision and accuracy on optical and semiconductor surfaces, with removal rates of up to 9 mm3/hour and promising excellent surface polishing qualities. An additional advantage of this new tool is the possibility to perform interferometric measurements during the polishing process without the need of dismounting the working surface. A series of advantages of this method, numerical simulations and experimental results are described.

  18. X-Chromosome Effects on Attention Networks: Insights from Imaging Resting-State Networks in Turner Syndrome.

    Science.gov (United States)

    Green, Tamar; Saggar, Manish; Ishak, Alexandra; Hong, David S; Reiss, Allan L

    2017-07-18

    Attention deficit hyperactivity disorder (ADHD) is strongly affected by sex, but sex chromosomes' effect on brain attention networks and cognition are difficult to examine in humans. This is due to significant etiologic heterogeneity among diagnosed individuals. In contrast, individuals with Turner syndrome (TS), who have substantially increased risk for ADHD symptoms, share a common genetic risk factor related to the absence of the X-chromosome, thus serving as a more homogeneous genetic model. Resting-state functional MRI was employed to examine differences in attention networks between girls with TS (n = 40) and age- sex- and Tanner-matched controls (n = 33). We compared groups on resting-state functional connectivity measures from data-driven independent components analysis (ICA) and hypothesis-based seed analysis. Using ICA, reduced connectivity was observed in both frontoparietal and dorsal attention networks. Similarly, using seeds in the bilateral intraparietal sulcus (IPS), reduced connectivity was observed between IPS and frontal and cerebellar regions. Finally, we observed a brain-behavior correlation between IPS-cerebellar connectivity and cognitive attention measures. These findings indicate that X-monosomy contributes affects to attention networks and cognitive dysfunction that might increase risk for ADHD. Our findings not only have clinical relevance for girls with TS, but might also serve as a biological marker in future research examining the effects of the intervention that targets attention skills. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  19. [The issue of harm reduction in Polish legislation concerning drug addiction. A comparative study].

    Science.gov (United States)

    Sobeyko, Justyna

    2008-01-01

    The aim of work is the assessment of legal permissibility for health and social harm reduction programmes resulting from drug use in the context of the polish legislation on narcotic drug use and drug addiction. The thesis outlines harm reduction programmes implemented worldwide, role of penal code in counteracting both narcotic drug supply and demand, attitude of United Nations and European Union to the drug problem including harm reduction programmes, solutions adopted in the selected European Union member states. The main part of the thesis presents the evolution of polish legislation regarding drug use and analysis of legal permissibility for harm reduction programmes in this context. The conclusion inferred is the statement that implementation of the harm reduction programmes requires a certain minimal depenalisation of the drug use by a legislator and the fact that restrictive legal system impedes programme realization. Thus the thesis postulates depenalisation of small drug quantities for personal use.

  20. Benefits and costs of IFRS implementation in the opinion of Polish certified auditors

    Directory of Open Access Journals (Sweden)

    Anna Karmańska

    2017-12-01

    Full Text Available The article presents the results of a survey conducted among a carefully selected group of Polish certified auditors. The purpose of the study was to determine whether auditors, during the audit of financial state- ments, perceive certain costs and benefits resulting from the fact that the audited statements were pre- pared in accordance with IFRS. This survey was undertaken to demonstrate that the cost-benefit analysis of IFRS, after more than a decade of their use in Polish practice, could provide important observations for future legislative changes in this area. The study shows that, thanks to the implementation of IFRSs, auditors gain the benefit of lower audit workloads. At the same time, however, they identify six reasons why the audit process is prolonged, requiring special organization, prior special preparation and, as a result, higher auditing costs

  1. Intergeneration transmission of cultural heritage of polish Tatars family in the years 1918 - 1939

    Directory of Open Access Journals (Sweden)

    URSZULA WRÓBLEWSKA

    2017-10-01

    Full Text Available The subject matter of my article is analysis religion educational and cultural processes, which influenced in family on Polish Muslim Tatars during the period between World Wars. Chronological rangę overlaps 1918-1939 years. During that period, Poland built its State structures after a long time of partitions. I would like to display a multi-dimensional characteristic of Polish Tatars religion education. In my article I would like to answer to the ąuestion: What was important in transfer between generation in family of Tatars? I would also like to fili in ‘blank’ in the researches in the field of Tatars minority and family educational processes in the years 1918-1939.

  2. Cultural differences: Polish fandom of Welcome to Night Vale

    Directory of Open Access Journals (Sweden)

    Agata Włodarczyk

    2015-06-01

    Full Text Available Welcome to Night Vale (2012– is an intertextual podcast in the tradition of popular horror and weird tales. Listeners are meant to be part of a (fictional community, listening to the radio in the small desert town of Night Vale in the Southwestern United States, although neither the state nor the exact time are specified. We follow the host of the program, Cecil Palmer, as he describes the town's community life, although the events presented in the show are far from normal. The first episode was published online June 15, 2012, with no marketing to accompany the event. Many had first heard about Welcome to Night Vale through fan art available via social media, including Tumblr, Soup.io, blog communities, Facebook groups, and deviantArt. Although the production is available in English only, it has a Polish fandom. We describe the difference in perception of this popular text based on differences in the cultural background and literary knowledge of the listeners. We also attend to fan practices such as fan art surrounding Welcome to Night Vale because their content correlates with the creator's culture of origin, as well as the issue of funding the free podcast among fans from different countries and different economies.

  3. Reel-to-reel substrate tape polishing system

    Energy Technology Data Exchange (ETDEWEB)

    Selvamanickam, Venkat; Gardner, Michael T.; Judd, Raymond D.; Weloth, Martin; Qiao, Yunfei

    2005-06-21

    Disclosed is a reel-to-reel single-pass mechanical polishing system (100) suitable for polishing long lengths of metal substrate tape (124) used in the manufacture of high-temperature superconductor (HTS) coated tape, including multiple instantiations of a polishing station (114) in combination with a subsequent rinsing station (116) arranged along the axis of the metal substrate tape (124) that is translating between a payout spool (110a) and a take-up spool (110b). The metal substrate tape obtains a surface smoothness that is suitable for the subsequent deposition of a buffer layer.

  4. Polishing Sapphire Substrates by 355 nm Ultraviolet Laser

    Directory of Open Access Journals (Sweden)

    X. Wei

    2012-01-01

    Full Text Available This paper tries to investigate a novel polishing technology with high efficiency and nice surface quality for sapphire crystal that has high hardness, wear resistance, and chemical stability. A Q-switched 355 nm ultraviolet laser with nanosecond pulses was set up and used to polish sapphire substrate in different conditions in this paper. Surface roughness Ra of polished sapphire was measured with surface profiler, and the surface topography was observed with scanning electronic microscope. The effects of processing parameters as laser energy, pulse repetition rate, scanning speed, incident angle, scanning patterns, and initial surface conditions on surface roughness were analyzed.

  5. Microscopic machining mechanism of polishing based on vibrations of liquid

    International Nuclear Information System (INIS)

    Huang, Z G; Guo, Z N; Chen, X; Yu, Z Q; Yu, T M; Lee, W B

    2007-01-01

    A molecular dynamics method has been applied to study the mechanism of polishing based on vibrations of liquid. Movements of polishing particles and formations of impact dents are simulated and discussed. The abrasive effect between particle and machined substrate is evaluated empirically. Polishing qualities, including roughness and fractal character under multiple impacts, are obtained by numerical methods. Results show that the particle will vibrate and roll viscously on the substrate. Press, tear and self-organization effects will be responsible for the formation of impact dents. Simulation results are compared with experimental data to verify the conclusions

  6. Presentation of the verbs in Bulgarian-Polish electronic dictionary

    Directory of Open Access Journals (Sweden)

    Ludmila Dimitrova

    2014-09-01

    Full Text Available Presentation of the verbs in Bulgarian-Polish electronic dictionary This paper briefly discusses the presentation of the verbs in the first electronic Bulgarian-Polish dictionary that is currently being developed under a bilateral collaboration between IMI-BAS and ISS-PAS. Special attention is given to the digital entry classifiers that describe Bulgarian and Polish verbs. Problems related to the correspondence between natural language phenomena and their presentations are discussed. Some examples illustrate the different types of dictionary entries for verbs.

  7. "Agricultural budget" and the competitiveness of the Polish agriculture

    OpenAIRE

    Lenkiewicz, Stanisław; Rokicki, Bartłomiej

    2014-01-01

    The aim of the publication is to assess the impact of public support on the functioning of the Polish agriculture. In order to achieve this aim the publication includes an analysis of the system of direct payments and rural development policy instruments planned to be implemented in Poland within the CAP 2014-2020. The study also presents an analysis of regional diversity of the Polish agriculture and an assessment of the scale of agricultural investment made in recent years in all the Polish...

  8. Brainstem neurons survive the identical ischemic stress that kills higher neurons: insight to the persistent vegetative state.

    Directory of Open Access Journals (Sweden)

    C Devin Brisson

    Full Text Available Global ischemia caused by heart attack, pulmonary failure, near-drowning or traumatic brain injury often damages the higher brain but not the brainstem, leading to a 'persistent vegetative state' where the patient is awake but not aware. Approximately 30,000 U.S. patients are held captive in this condition but not a single research study has addressed how the lower brain is preferentially protected in these people. In the higher brain, ischemia elicits a profound anoxic depolarization (AD causing neuronal dysfunction and vasoconstriction within minutes. Might brainstem nuclei generate less damaging AD and so be more resilient? Here we compared resistance to acute injury induced from simulated ischemia by 'higher' hippocampal and striatal neurons versus brainstem neurons in live slices from rat and mouse. Light transmittance (LT imaging in response to 10 minutes of oxygen/glucose deprivation (OGD revealed immediate and acutely damaging AD propagating through gray matter of neocortex, hippocampus, striatum, thalamus and cerebellar cortex. In adjacent brainstem nuclei, OGD-evoked AD caused little tissue injury. Whole-cell patch recordings from hippocampal and striatal neurons under OGD revealed sudden membrane potential loss that did not recover. In contrast brainstem neurons from locus ceruleus and mesencephalic nucleus as well as from sensory and motor nuclei only slowly depolarized and then repolarized post-OGD. Two-photon microscopy confirmed non-recoverable swelling and dendritic beading of hippocampal neurons during OGD, while mesencephalic neurons in midbrain appeared uninjured. All of the above responses were mimicked by bath exposure to 100 µM ouabain which inhibits the Na+/K+ pump or to 1-10 nM palytoxin which converts the pump into an open cationic channel. Therefore during ischemia the Na+/K+ pump of higher neurons fails quickly and extensively compared to naturally resilient hypothalamic and brainstem neurons. The selective survival

  9. Using campaigns to improve perceptions of the value of adult vaccination in the United States: Health communication considerations and insights.

    Science.gov (United States)

    Nowak, Glen J; Shen, Angela K; Schwartz, Jason L

    2017-10-09

    Vaccines have much relevance and promise for improving adult health in the United States, but to date, overall use and uptake remain far below desired levels. Many adults have not received recommended vaccinations and many healthcare providers do not strongly and actively encourage their use with patients. This has led some public health and medical experts to conclude that adult vaccines are severely undervalued by the U.S. public and healthcare providers and to call for campaigns and communication-based efforts to foster increased appreciation, and in turn, higher adult immunization rates. A narrative integrative review that draws upon the vaccine valuation and health communication literatures is used to develop a framework to guide campaign and communication-based efforts to improve public, provider, and policymakers' assessment of the value of adult vaccination. The review does this by: (1) distinguishing social psychological value from economic value; (2) identifying the implications of social psychological value considerations for adult vaccination-related communication campaigns; and (3) using five core health communication considerations to illustrate how social psychological notions of value can be integrated into campaigns or communication that are intended to improve adult vaccination value perceptions and assessments, and in turn, motivate greater support for and uptake of recommended adult vaccines. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. Scaling properties of Polish rain series

    Science.gov (United States)

    Licznar, P.

    2009-04-01

    Scaling properties as well as multifractal nature of precipitation time series have not been studied for local Polish conditions until recently due to lack of long series of high-resolution data. The first Polish study of precipitation time series scaling phenomena was made on the base of pluviograph data from the Wroclaw University of Environmental and Life Sciences meteorological station located at the south-western part of the country. The 38 annual rainfall records from years 1962-2004 were converted into digital format and transformed into a standard format of 5-minute time series. The scaling properties and multifractal character of this material were studied by means of several different techniques: power spectral density analysis, functional box-counting, probability distribution/multiple scaling and trace moment methods. The result proved the general scaling character of time series at the range of time scales ranging form 5 minutes up to at least 24 hours. At the same time some characteristic breaks at scaling behavior were recognized. It is believed that the breaks were artificial and arising from the pluviograph rain gauge measuring precision limitations. Especially strong limitations at the precision of low-intensity precipitations recording by pluviograph rain gauge were found to be the main reason for artificial break at energy spectra, as was reported by other authors before. The analysis of co-dimension and moments scaling functions showed the signs of the first-order multifractal phase transition. Such behavior is typical for dressed multifractal processes that are observed by spatial or temporal averaging on scales larger than the inner-scale of those processes. The fractal dimension of rainfall process support derived from codimension and moments scaling functions geometry analysis was found to be 0.45. The same fractal dimension estimated by means of the functional box-counting method was equal to 0.58. At the final part of the study

  11. Polish electoral geography and its methods

    Directory of Open Access Journals (Sweden)

    Zbigniew Rykiel

    2011-01-01

    Full Text Available Differences in the understanding of electoral geography between social sciences are discussed in the article. Main fields and spatial scales of Polish electoral geography are identified. Main methods of multidimensional statistics are discussed. A necessity of a proper choice, based on theories of voting behaviour, of explaning variables to statistical models are emphasised. Regression analysis indicates only a formal usefulness in electoral geography, for quantitative relationships between variables in the model can be evidenced, which may be meaningless not only essentially, but even statistically. The application of canonical analysis in electoral geography brought a methodological turning-point to the statistical approach. This method allowed to combine: (1 the foundation of the selection of input variables on theories of voting behaviour; (2 the analysis of dependence of the electoral results on socio-economic characteristics of areas; (3 an identification of electoral options; (4 a quantification of the role of the historical heritage in the contemporary voting behaviour; and (5 the analysis of the stability of the electoral space. A well grounded opinion was weakened about the general competitiveness of right- and left-wing parties in Poland’s political space. Parties with similar rather than different programmes compete in given areas. It was indicated that elections have only formal influence on the structure of Parliament while the electoral system is decisive. Electoral, including territorial, manipulations also play their part. The empirical analysis indicated that Poland’s political space is polarised between the right-wing-oriented areas of the south-eastern half of the country and the left-wing-oriented areas of the north-western half. The political competition between the left and the right operates merely on the national scale, while it is not reflected territorially.The quantification of the influence of the nineteenth

  12. Which kind of aromatic structures are produced during biomass charring? New insights provided by modern solid-state NMR spectroscopy

    Science.gov (United States)

    Knicker, Heike; Paneque-Carmona, Marina; Velasco-Molina, Marta; de la Rosa, José Maria; León-Ovelar, Laura Regina; Fernandez-Boy, Elena

    2017-04-01

    Intense research on biochar and charcoal of the last years has revealed that depending on the production conditions, the chemical and physical characteristics of their aromatic network can greatly vary. Since such variations are determining the behavior and stability of charred material in soils, a better understanding of the structural changes occurring during their heating and the impact of those changes on their function is needed. One method to characterize pyrogenic organic matter (PyOM) represents solid-state 13C NMR spectroscopy applying the cross polarization (CP) magic angle spinning technique (MAS). A drawback of this technique is that the quantification of NMR spectra of samples with highly condensed and proton-depleted structures is assumed to be bias. Typical samples with such attributes are charcoals produced at temperatures above 700°C under pyrolytic conditions. Commonly their high condensation degree leads to graphenic structures that are not only reducing the CP efficiency but create also a conductive lattice which acts as a shield and prevents the entering of the excitation pulse into the sample during the NMR experiments. Since the latter can damage the NMR probe and in the most cases the obtained NMR spectra show only one broad signal assignable to aromatic C, this technique is rarely applied for characterizing high temperature chars or soot. As a consequence, a more detailed knowledge of the nature of the aromatic ring systems is still missing. The latter is also true for the aromatic domains of PyOM produced at lower temperatures, since older NMR instruments operating at low magnetic fields deliver solid-state 13C NMR spectra with low resolution which turns a more detailed analysis of the aromatic chemical shift region into a challenging task. In order to overcome this disadvantages, modern NMR spectroscopy offers not only instruments with greatly improved resolution but also special pulse sequences for NMR experiments which allow a more

  13. A rate-state model for aftershocks triggered by dislocation on a rectangular fault: a review and new insights

    Directory of Open Access Journals (Sweden)

    F. Catalli

    2006-06-01

    Full Text Available We compute the static displacement, stress, strain and the Coulomb failure stress produced in an elastic medium by a finite size rectangular fault after its dislocation with uniform stress drop but a non uniform dislocation on the source. The time-dependent rate of triggered earthquakes is estimated by a rate-state model applied to a uniformly distributed population of faults whose equilibrium is perturbated by a stress change caused only by the first dislocation. The rate of triggered events in our simulations is exponentially proportional to the shear stress change, but the time at which the maximum rate begins to decrease is variable from fractions of hour for positive stress changes of the order of some MPa, up to more than a year for smaller stress changes. As a consequence, the final number of triggered events is proportional to the shear stress change. The model predicts that the total number of events triggered on a plane containing the fault is proportional to the 2/3 power of the seismic moment. Indeed, the total number of aftershocks produced on the fault plane scales in magnitude, M, as 10M. Including the negative contribution of the stress drop inside the source, we observe that the number of events inhibited on the fault is, at long term, nearly identical to the number of those induced outside, representing a sort of conservative natural rule. Considering its behavior in time, our model does not completely match the popular Omori law; in fact it has been shown that the seismicity induced closely to the fault edges is intense but of short duration, while that expected at large distances (up to some tens times the fault dimensions exhibits a much slower decay.

  14. State of stress in exhumed basins and implications for fluid flow: insights from the Illizi Basin, Algeria

    KAUST Repository

    English, Joseph M.

    2017-05-31

    The petroleum prospectivity of an exhumed basin is largely dependent on the ability of pre-existing traps to retain oil and gas volumes during and after the exhumation event. Although faults may act as lateral seals in petroleum traps, they may start to become hydraulically conductive again and enable fluid flow and hydrocarbon leakage during fault reactivation. We constrain the present day in situ stresses of the exhumed Illizi Basin in Algeria and demonstrate that the primary north–south and NW–SE (vertical strike-slip) fault systems in the study area are close to critical stress (i.e. an incipient state of shear failure). By contrast, the overpressured and unexhumed Berkine Basin and Hassi Messaoud areas to the north do not appear to be characterized by critical stress conditions. We present conceptual models of stress evolution and demonstrate that a sedimentary basin with benign in situ stresses at maximum burial may change to being characterized by critical stress conditions on existing fault systems during exhumation. These models are supportive of the idea that the breaching of a closed, overpressured system during exhumation of the Illizi Basin may have been a driving mechanism for the regional updip flow of high-salinity formation water within the Ordovician reservoirs during Eocene–Miocene time. This work also has implications for petroleum exploration in exhumed basins. Fault-bounded traps with faults oriented at a high angle to the maximum principal horizontal stress direction in strike-slip or normal faulting stress regimes are more likely to have retained hydrocarbons in exhumed basins than fault-bounded traps with faults that are more optimally oriented for shear failure and therefore have a greater propensity to become critically stressed during exhumation.

  15. DEMONSTRATION BULLETIN: COLLOID POLISHING FILTER METHOD - FILTER FLOW TECHNOLOGY, INC.

    Science.gov (United States)

    The Filter Flow Technology, Inc. (FFT) Colloid Polishing Filter Method (CPFM) was tested as a transportable, trailer mounted, system that uses sorption and chemical complexing phenomena to remove heavy metals and nontritium radionuclides from water. Contaminated waters can be pro...

  16. The resettlement of Polish refugees after the second world war

    Directory of Open Access Journals (Sweden)

    Agata Blaszczyk

    2017-02-01

    Full Text Available The passing of the Polish Resettlement Act and the creation of the different agencies related to it undoubtedly represented an unprecedented response to the challenge of mass migration in the UK.

  17. Comparative study of performance of shoe polishes formulated from ...

    African Journals Online (AJOL)

    GARZALI

    1Department of Pure and Industrial Chemistry, Bayero University, Kano. 2College of Science ... carbon black pigment. Polyethylene polish like the one formulated using carbon black pigment was ... into fine black powder. Purification of Wax.

  18. Polish Defense Policy in the Context of National Security Strategy

    National Research Council Canada - National Science Library

    Bieniek, Piotr S

    2006-01-01

    ...) and the North Atlantic Treaty Organization (NATO). Polish security policy and strategy is shaped by its geographical location, which places Poland in NATO's main strategic area opposite the Russian Federation and Belarus...

  19. Employability management practices in the Polish ICT sector

    NARCIS (Netherlands)

    Marzec, I.; van der Heijden, Beatrice; Scholarios, D.; van der Schoot, E.; Jedrzejowicz, P.; Bozionelos, N.; Epitropaki, O.; Knauth, P.; Mikkelsen, A.; van der Heijde, C.M.

    2009-01-01

    This article examines current career thinking and employability management practices within the Polish Information and Communication Technology (ICT) sector. The aim of this contribution is to identify career management problems and to determine obstacles for implementing employability management

  20. Super Polishing of Aluminum 6061-T6 Mirrors, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — An innovative 2D super-polishing process for Aluminum 6061-T6 planar mirrors which removes diamond point turning (DPT) grooves and attains rms surface finishes below...

  1. Production of rare earth polishing powders in Russia

    International Nuclear Information System (INIS)

    Kosynkin, V.D.; Ivanov, E.N.; Kotrekhov, V.A.; Shtutza, M.G.; Grabko, A.I.

    1998-01-01

    Full text: Russia is a potent producer of polishing powders made of rare earth material presented as an extensive and well developed base. Considering the reserves, the facilities predisposition and the polishing agent (cerium dioxide) content the chief mineral source is loparite, apatite and monazite. The production of rare earth polishing powders is based on specially developed continuous technological processes, corrosion-proof equipment, ensuring a high and stable production quality. A special attention is paid to the radiation safety of the powders. The initial material for the rare earth polishing powders based on loparite is the fusion cake of rare earth chlorides obtained at that mineral chlorination. The technology of the polishing powder production from the REE fusion cake includes the following stages: dissolution of the REE fusion cake chlorides; - thorough cleaning of the REE fusion cake chlorides from radioactive and non-rare-earth impurities; chemical precipitation of REE carbonates, obtaining middlings with proper material and granulometric composition, thermal treatment of precipitated carbonates followed with the operations of drying and roasting; classification of roasted oxides, obtaining end products - polishing powders. The production of fluorine-containing powders includes the stage of their fluorination after the stage of carbonate precipitation. The stabilizing doping can be introduced both into the middlings during one of the technological process of powders manufacturing and into the end product. Rare earth polishing powders are manufactured in Russia by the Share Holding Company 'Chepetz Mechanical Plant' (ChMP Co.), the city of Glasov. The plant produces a number of polishing materials, such as; polishing powder Optinol, containing at least 50% by mass of cerium dioxide, used in the mass production of optical and other articles; polishing powder Optinol-10 with doping to improve the sedimentary and aggregate stability of the solid phase

  2. Research on high-efficiency polishing technology of photomask substrate

    Science.gov (United States)

    Zhao, Shijie; Xie, Ruiqing; Zhou, Lian; Liao, Defeng; Chen, Xianhua; Wang, Jian

    2018-03-01

    A method of photomask substrate fabrication is demonstrated ,that the surface figure and roughness of fused silica will converge to target precision rapidly with the full aperture polishing. Surface figure of optical flats in full aperture polishing processes is primarily dependent on the surface profile of polishing pad, therefor, a improved function of polishing mechanism was put forward based on two axis lapping machine and technology experience, and the pad testing based on displacement sensor and the active conditioning method of the pad is applied in this research. Moreover , the clamping deformation of the thin glass is solved by the new pitch dispensing method. The experimental results show that the surface figure of the 152mm×152mm×6.35mm optical glass is 0.25λ(λ=633nm) and the roughness is 0.32nm ,which has meet the requirements of mask substrate for 90 45nm nodes.

  3. Polish president escapes domestic troubles during state visit / Milda Seputyte

    Index Scriptorium Estoniae

    Seputyte, Milda

    2005-01-01

    Poola presidenti Aleksander Kwasnievskit kritiseeritakse, kuna ta ei soovi olla naftakompanii Orlen erastamisjuhtumi tunnistajaks. President sõitis visiidile Leetu, et arutada 9. mai Moskva pidustustega seonduvat ning määratleda Leedu ja Poola panust Euroopa Liidu poliitikasse

  4. Laser polishing of 3D printed mesoscale components

    International Nuclear Information System (INIS)

    Bhaduri, Debajyoti; Penchev, Pavel; Batal, Afif; Dimov, Stefan; Soo, Sein Leung; Sten, Stella; Harrysson, Urban; Zhang, Zhenxue; Dong, Hanshan

    2017-01-01

    Highlights: • Process optimisation for laser polishing novel 3D printed SS316L parts. • Evaluating the effects of key polishing parameters on SS316L surface roughness. • Detailed spectroscopic analysis of oxide layer formation due to laser polishing. • Comparative surface integrity analysis of SS parts polished in air and argon. • A maximum reduction in roughness of over 94% achieved at optimised polishing settings. - Abstract: Laser polishing of various engineered materials such as glass, silica, steel, nickel and titanium alloys, has attracted considerable interest in the last 20 years due to its superior flexibility, operating speed and capability for localised surface treatment compared to conventional mechanical based methods. The paper initially reports results from process optimisation experiments aimed at investigating the influence of laser fluence and pulse overlap parameters on resulting workpiece surface roughness following laser polishing of planar 3D printed stainless steel (SS316L) specimens. A maximum reduction in roughness of over 94% (from ∼3.8 to ∼0.2 μm S_a) was achieved at the optimised settings (fluence of 9 J/cm"2 and overlap factors of 95% and 88–91% along beam scanning and step-over directions respectively). Subsequent analysis using both X-ray photoelectron spectroscopy (XPS) and glow discharge optical emission spectroscopy (GDOES) confirmed the presence of surface oxide layers (predominantly consisting of Fe and Cr phases) up to a depth of ∼0.5 μm when laser polishing was performed under normal atmospheric conditions. Conversely, formation of oxide layers was negligible when operating in an inert argon gas environment. The microhardness of the polished specimens was primarily influenced by the input thermal energy, with greater sub-surface hardness (up to ∼60%) recorded in the samples processed with higher energy density. Additionally, all of the polished surfaces were free of the scratch marks, pits, holes, lumps

  5. Laser polishing of 3D printed mesoscale components

    Energy Technology Data Exchange (ETDEWEB)

    Bhaduri, Debajyoti, E-mail: debajyoti.bhaduri@gmail.com [Department of Mechanical Engineering, School of Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom); Penchev, Pavel; Batal, Afif; Dimov, Stefan; Soo, Sein Leung [Department of Mechanical Engineering, School of Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom); Sten, Stella; Harrysson, Urban [Digital Metal, Höganäs AB, 263 83 Höganäs (Sweden); Zhang, Zhenxue; Dong, Hanshan [School of Metallurgy and Materials, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom)

    2017-05-31

    Highlights: • Process optimisation for laser polishing novel 3D printed SS316L parts. • Evaluating the effects of key polishing parameters on SS316L surface roughness. • Detailed spectroscopic analysis of oxide layer formation due to laser polishing. • Comparative surface integrity analysis of SS parts polished in air and argon. • A maximum reduction in roughness of over 94% achieved at optimised polishing settings. - Abstract: Laser polishing of various engineered materials such as glass, silica, steel, nickel and titanium alloys, has attracted considerable interest in the last 20 years due to its superior flexibility, operating speed and capability for localised surface treatment compared to conventional mechanical based methods. The paper initially reports results from process optimisation experiments aimed at investigating the influence of laser fluence and pulse overlap parameters on resulting workpiece surface roughness following laser polishing of planar 3D printed stainless steel (SS316L) specimens. A maximum reduction in roughness of over 94% (from ∼3.8 to ∼0.2 μm S{sub a}) was achieved at the optimised settings (fluence of 9 J/cm{sup 2} and overlap factors of 95% and 88–91% along beam scanning and step-over directions respectively). Subsequent analysis using both X-ray photoelectron spectroscopy (XPS) and glow discharge optical emission spectroscopy (GDOES) confirmed the presence of surface oxide layers (predominantly consisting of Fe and Cr phases) up to a depth of ∼0.5 μm when laser polishing was performed under normal atmospheric conditions. Conversely, formation of oxide layers was negligible when operating in an inert argon gas environment. The microhardness of the polished specimens was primarily influenced by the input thermal energy, with greater sub-surface hardness (up to ∼60%) recorded in the samples processed with higher energy density. Additionally, all of the polished surfaces were free of the scratch marks, pits, holes

  6. Reusing Ceramic Tile Polishing Waste In Paving Block Manufacturing

    OpenAIRE

    Giordano Penteado; Carmenlucia Santos; de Carvalho; Eduardo Viviani; Cecche Lintz; Rosa Cristina

    2016-01-01

    Ceramic companies worldwide produce large amounts of polishing tile waste, which are piled up in the open air or disposed of in landfills. These wastes have such characteristics that make them potential substitutes for cement and sand in the manufacturing of concrete products. This paper investigates the use of ceramic tile polishing waste as a partial substitute for cement and sand in the manufacturer of concrete paving blocks. A concrete mix design was defined and then the sand was replaced...

  7. Borel hierarchies in infinite products of Polish spaces

    Indian Academy of Sciences (India)

    with two product topologies: (i) the product of copies of the Polish topology on X, so that H is again a Polish space and (ii) the product of copies of the discrete topology on X. Define now the Borel hierarchy in the larger topology on H. To do so, we need some notation. An element of H will be denoted by h = (x1,x2,...,xn,.

  8. Polish Standard of the Technical Safety of Transmission Gas Pipelines

    International Nuclear Information System (INIS)

    Tkacz, A.J.

    2006-01-01

    The document is presenting the idea of the CNGI Norm called The Polish Standard of the Technical Safety of Transmission Gas Pipelines and the way of using it by companies associated in the Chamber of the Natural Gas Industry in the business activity. It will be applied to improve the quality and reliability of gas transmission after full opening of Polish natural gas market. (author)

  9. Factors influencing the surface quality of polished tool steels

    International Nuclear Information System (INIS)

    Rebeggiani, S; Rosén, B-G

    2014-01-01

    Today’s demands on surface quality of moulds for injection moulding of plastic components involve no/low defect contents and roughness levels in the nm-range for high gloss applications. Material properties as well as operating conditions influence the mould finish, and thus the final surface of moulded products. This paper focuses on how particle content and different polishing strategies influence final surface qualities of moulds. Visual estimations of polished tool steel samples were combined with non-contact 3D-surface texture analysis in order to correlate traditional assessments to more quantitative methods, and to be able to analyse the surfaces at nanometre-level. It was found that steels with a lower proportion of particles, like carbides and oxides, gave rise to smoother polished surfaces. In a comparative study of polishers from different polishing shops, it was found that while different surface preparation strategies can lead to similar final roughness, similar preparation techniques can produce high-quality surfaces from different steel grades. However, the non-contact 3D-surface texture analysis showed that not all smooth polished surfaces have desirable functional topographies for injection moulding of glossy plastic components. (paper)

  10. Study of Profile Changes during Mechanical Polishing using Relocation Profilometry

    Science.gov (United States)

    Kumaran, S. Chidambara; Shunmugam, M. S.

    2017-10-01

    Mechanical polishing is a finishing process practiced conventionally to enhance quality of surface. Surface finish is improved by mechanical cutting action of abrasive particles on work surface. Polishing is complex in nature and research efforts have been focused on understanding the polishing mechanism. Study of changes in profile is a useful method of understanding behavior of the polishing process. Such a study requires tracing same profile at regular process intervals, which is a tedious job. An innovative relocation technique is followed in the present work to study profile changes during mechanical polishing of austenitic stainless steel specimen. Using special locating fixture, micro-indentation mark and cross-correlation technique, the same profile is traced at certain process intervals. Comparison of different parameters of profiles shows the manner in which metal removal takes place in the polishing process. Mass removal during process estimated by the same relocation technique is checked with that obtained using weight measurement. The proposed approach can be extended to other micro/nano finishing processes and favorable process conditions can be identified.

  11. Polish Adaptation of Wrist Evaluation Questionnaires.

    Science.gov (United States)

    Czarnecki, Piotr; Wawrzyniak-Bielęda, Anna; Romanowski, Leszek

    2015-01-01

    Questionnaires evaluating hand and wrist function are a very useful tool allowing for objective and systematic recording of symptoms reported by the patients. Most questionnaires generally accepted in clinical practice are available in English and need to be appropriately adapted in translation and undergo subsequent validation before they can be used in another culture and language. The process of translation of the questionnaires was based on the generally accepted guidelines of the International Quality of Life Assessment Project (IQOLA). First, the questionnaires were translated from English into Polish by two independent translators. Then, a joint version of the translation was prepared collectively and translated back into English. Each stage was followed by a written report. The translated questionnaires were then evaluated by a group of patients. We selected 31 patients with wrist problems and asked them to complete the PRWE, Mayo, Michigan and DASH questionnaires twice at intervals of 3-10 days. The results were submitted for statistical analysis. We found a statistically significant (pquestionnaires. A comparison of the PRWE and Mayo questionnaires with the DASH questionnaire also showed a statistically significant correlation (pquestionnaires was successful and that the questionnaires may be used in clinical practice.

  12. Automated visual inspection for polished stone manufacture

    Science.gov (United States)

    Smith, Melvyn L.; Smith, Lyndon N.

    2003-05-01

    Increased globalisation of the ornamental stone market has lead to increased competition and more rigorous product quality requirements. As such, there are strong motivators to introduce new, more effective, inspection technologies that will help enable stone processors to reduce costs, improve quality and improve productivity. Natural stone surfaces may contain a mixture of complex two-dimensional (2D) patterns and three-dimensional (3D) features. The challenge in terms of automated inspection is to develop systems able to reliably identify 3D topographic defects, either naturally occurring or resulting from polishing, in the presence of concomitant complex 2D stochastic colour patterns. The resulting real-time analysis of the defects may be used in adaptive process control, in order to avoid the wasteful production of defective product. An innovative approach, using structured light and based upon an adaptation of the photometric stereo method, has been pioneered and developed at UWE to isolate and characterize mixed 2D and 3D surface features. The method is able to undertake tasks considered beyond the capabilities of existing surface inspection techniques. The approach has been successfully applied to real stone samples, and a selection of experimental results is presented.

  13. Personality of Polish gay men and women

    Directory of Open Access Journals (Sweden)

    Marcin Kwiatkowski

    2015-12-01

    Full Text Available Background Sexuality is a part of one’s identity and personality that is shaped under the influence of biological and environmental factors and interactions with society. The results of research conducted so far and concerning the personality traits of gay men and women are not consistent, and only a small number of them concern the Polish population. Hence the objective of the present research was to provide personality profiles of men and women with different sexual orientations. Participants and procedure The participants (N = 346 included 84 gay women, 82 gay men, 95 heterosexual women and 85 heterosexual men. The following measures were used: a survey developed by the author, the Kinsey Scale, the EPQ-R (Eysenck Personality Questionnaire Revised adapted by Brzozowski and Drwal (1995, and the Sixteen-factor Personality Questionnaire of Cattell adapted by Nowakowska (1970. Results The results support the hypothesis that gay women and heterosexual men share similar personality traits, while gay men have more diverse traits, similar to the traits typical for heterosexual women and men. In particular, personalities of gay men are described by such traits as progressive attitude, independence, or willingness to take risks, which means traits linked to factor Q1. The highest values of that factor are observable in the case of gay men, as compared to gay women, and also in comparison with heterosexual men and women. Conclusions Sexual orientation is responsible for differences in personality traits of the studied group to a greater extent than their biological sex.

  14. Thermodynamical motivation of the Polish energy policy

    Directory of Open Access Journals (Sweden)

    Ziębik Andrzej

    2013-02-01

    Full Text Available Basing on the first and second law of thermodynamics the fundamental trends in the Polish energy policy are analysed, including the aspects of environmental protection. The thermodynamical improvement of real processes (reduction of exergy losses is the main way leading to an improvement of the effectivity of energy consumption. If the exergy loss is economically not justified, we have to do with an error from the viewpoint of the second law analysis. The paper contains a thermodynamical analysis of the ratio of final and primary energy, as well as the analysis of the thermo-ecological cost and index of sustainable development concerning primary energy. Analyses of thermo-ecological costs concerning electricity and centralized heat production have been also carried out. The effect of increasing the share of high-efficiency cogeneration has been analyzed, too. Attention has been paid to an improved efficiency of the transmission and distribution of electricity, which is of special importance from the viewpoint of the second law analysis. The improvement of the energy effectivity in industry was analyzed on the example of physical recuperation, being of special importance from the point of view of exergy analysis.

  15. Polish university as an (unattractive potential employer

    Directory of Open Access Journals (Sweden)

    Baruk, Agnieszka Izabela

    2017-12-01

    Full Text Available The article presents issues associated with the reasons for the fact that young potential employees are not interested in starting work at Polish universities. The article is theoretical-empirical in character. The theoretical part highlights the importance of a situation in which an entity is regarded as an attractive employer, which allows attracting the best employees. Particular attention is paid to the fact that a university needs to build its image as an employer, which results from its characteristics. The article strives to achieve three research goals, among others, identifying the reasons why respondents are not interested in starting work at a university and arranging these reasons hierarchically. Two research hypotheses were subject to preliminary verification: H1 – the main reason for the unwillingness to start work at a university are financial aspects; H2 – the main reason for the unwillingness to start work at a university are the aspects of prestige. The data collected in course of primary research were subject to quantitative analysis based on the method of average assessment analysis and the method of factor analysis. Their results show that the respondents were not interested in work at a university mainly because they wanted to test the knowledge and skills acquired during studies in other branches. At the same time, the aspects of finances and prestige didn’t play a major role. Thus, in case of the surveyed sample of respondents both research hypotheses have to be recognized as untrue.

  16. Mercury emissions from polish pulverized coalfired boiler

    Directory of Open Access Journals (Sweden)

    Wichliński Michał

    2017-01-01

    Full Text Available The current paper presents the research results carried out at one of Polish power plants at a pulverized hard coal-fired 225 MW unit. The research was carried out at full load of the boiler (100% MCR and focused on analysis of mercury content in the input fuel and limestone sorbent for wet flue gas desulfurization (FGD system, as well as investigation of mercury content in the combustion products, i.e. fly ash, slag, FGD product (gypsum and FGD effluents (waste. Within the framework of the present study the concentration of mercury vapor in the exhaust gas was also investigated. The analysis was performed using Lumex RA-915+ spectrometer with an attachment (RP-91C. The measurements were carried out at three locations, i.e. before the electrostatic precipitator (ESP, downstream the ESP, and downstream the wet FGD plant. Design of the measurement system allowed to determine both forms of mercury in the flue gas (Hg0 and Hg2+ at all measurement locations.Based on the measurement results the balance of mercury for a pulverized coal (PC boiler was calculated and the amount of mercury was assessed both in the input solids (fuel and sorbent, as well as the gaseous and solids products (flue gas, slag, ash, gypsum and FGD waste.

  17. The socio-economic and spatial transformation of Polish cities after 1989

    Directory of Open Access Journals (Sweden)

    Jerzy J. Parysek

    2004-12-01

    Full Text Available The aim of this paper is to present the socio-economic and spatial transformation of Polish cities after 1989. The Polish changes reached the structures of the three basic subsystems of the state: political (power, social (society, and economic (the economy. The systemic transformation that has taken place in Poland after 1989 is most readily visible in towns, although it was introduced in the country as a whole. For the development and transforma-tion of towns, the most important were the introduction of local government structures and the market model of the economy. The restitution of local government has ensured towns an authentic manager authorised to perform his function by the local community. The in-troduction of the market model to the economy has resulted in its privatisation and the ap-pearance of enterprise and competition. Towns, especially the biggest cities, have become attractive locations for investment. Cities with a balanced economic structure and well-de-veloped infrastructure had much better chances for growth to start with. Unfortunately, the transformation period has also had some detrimental effects, the most important being un-employment and all kinds of social deviance. However, Polish cities are certainly different today and resemble Western cities to a greater extent than did the so-called socialist towns built along theoretically beautiful but practically ineffectual ideological lines.

  18. THE ECCLESIAL IMPLICATIONS OF THE LETTER OF THE POLISH BISHOPS TO THE GERMAN BISHOPS OF 1965

    Directory of Open Access Journals (Sweden)

    Żmudziński Marek

    2017-12-01

    Full Text Available The effects of World War II influenced the relations between the nations of Europe. They also influenced the life of the Church in a universal way, because its members found themselves of both sides of the Iron Curtain. This was particularly visible in Polish-German relations. The Polish bishops, inspired by the message of the Gospel and the legacy of the Second Vatican Council, came forward with a proposal of initiating the process of reconciliation. The words, “we forgive and ask for forgiveness”, contained in the Letter to the German Bishops of 1965, became the inspiration for the years-long reconciliation effort. The specific results of this formula are indicated in the formal normalisation of the state and church relations. In the ecclesial dimension, it included a new canonical diocese order and cooperation on the pastoral, charitable and journalistic plane. The real influence of the Polish-German reconciliation on the process of integration of the peoples of Europe should be emphasised. In this sense, the influence of the Christian message on shaping the public sphere is revealed.

  19. The Dynamics of Lithuanian-Polish Strategic Partnership

    Directory of Open Access Journals (Sweden)

    Pukšto Andžej

    2014-12-01

    Full Text Available The paper aims at identifying relations between the events which influence Lithuanian-Polish strategic cooperation, defining principal aspects of cooperation dynamics, and analysing recent challenges in relations between Lithuania and Poland. For the purpose of analysis the following objectives have been set: 1 to analyse the development of strategic partnership and political dialogue in bilateral relations; 2 to evaluate the importance of security, defence policy, and economic projects in cooperation between the states; 3 to assess the aspect of ethnic minorities in the context of bilateral relations. The authors of the paper seek to review the principal internal and external factors which affect bilateral cooperation between Lithuania and Poland. The following methods of analysis are used in the paper: public statements made by officials, document analysis and discourse formed by the media. The key areas of analysis are the development of political dialogue, strategic cooperation, security and defence policy, economic and energy cooperation, and questions of ethnic minorities in bilateral relations. Presently in the field there is a lack of thorough investigation of similarities and differences of strategic cooperation between Lithuania and Poland.

  20. POLISH AND EUROPEAN ECONOMIC CULTURE – A COMPARISON

    Directory of Open Access Journals (Sweden)

    Izabela Ścibiorska-Kowalczyk

    2013-12-01

    Full Text Available The term "economic culture" describes historically shaped elements in the general culture of population, concerning values recognized and desired by a particular community, relating to the management and to the economic system of the states. The most important economic cultural behaviors include: awareness of economic choices, attitudes and behaviors of economic choices, the rules of the economic game. There is a theory which assumes that the globalization of the economy will lead to the emergence of a single, common to the whole world culture through enculturation, which is defined as a gradual process of growing of the individual (or group into the culture or cultures through assimilation of cultural heritage of the surrounding community. More inculturation can be understood as a process of movement between different cultures come into contact and the transmission of cultural patterns. The article is an attempt at presenting the Polish economic culture against the European background and identifying the differences. It discusses the impact of national history and religion on the present shape of economic life, with particular regard to its negative aspects, i.e. the relatively high level of bribery and unemployment or the negative personal attitudes.

  1. Study on chemical mechanical polishing of silicon wafer with megasonic vibration assisted.

    Science.gov (United States)

    Zhai, Ke; He, Qing; Li, Liang; Ren, Yi

    2017-09-01

    Chemical mechanical polishing (CMP) is the primary method to realize the global planarization of silicon wafer. In order to improve this process, a novel method which combined megasonic vibration to assist chemical mechanical polishing (MA-CMP) is developed in this paper. A matching layer structure of polishing head was calculated and designed. Silicon wafers are polished by megasonic assisted chemical mechanical polishing and traditional chemical mechanical polishing respectively, both coarse polishing and precision polishing experiments were carried out. With the use of megasonic vibration, the surface roughness values Ra reduced from 22.260nm to 17.835nm in coarse polishing, and the material removal rate increased by approximately 15-25% for megasonic assisted chemical mechanical polishing relative to traditional chemical mechanical polishing. Average Surface roughness values Ra reduced from 0.509nm to 0.387nm in precision polishing. The results show that megasonic assisted chemical mechanical polishing is a feasible method to improve polishing efficiency and surface quality. The material removal and finishing mechanisms of megasonic vibration assisted polishing are investigated too. Copyright © 2017 Elsevier B.V. All rights reserved.

  2. Africa Insight: Submissions

    African Journals Online (AJOL)

    Author Guidelines. Africa Insight is a quarterly, peer-reviewed journal of the Africa Institute of South Africa (AISA). It is accredited by the Department of Higher ... Abstract: All articles should be accompanied by an abstract of between 100 and 125 words stating the main research problem, major findings and conclusion(s).

  3. The Polish Mother on the defensive? The transformation of the myth and its impact on the motherhood of Polish women

    Directory of Open Access Journals (Sweden)

    Agnieszka Imbierowicz

    2012-06-01

    Full Text Available The subject of this presentation is the attempt to define and to present the origins, socio-cultural content and the evolution of The Polish Mother myth, present in the polish national consciousness. The author tries to show how this myth was born, what functions it fulfilled and what forms it took in the changing historical and social reality, from the moment of loss of independence, through a period of real socialism, until the present day. The impact of this myth in the lives of real women and their motherhood is taken into consideration. Then, the author comparing the results of the latest polish sociological researches on the family and its transformation, and transformation of value systems together with theories about the specifics of life in the period of postmodernity, wonders whether it’s time to deconstruct the myth of The Polish Mother, because it does not fit the conditions of today’s world, which is characterized, above all, by the apotheosis of individuality, self-realization and freedom, or perhaps in polish society there is still strong traditionalism in thinking about motherhood, and the myth of The Polish Mother is still alive?

  4. Africa Insight

    African Journals Online (AJOL)

    Africa Insight is a quarterly, peer-reviewed journal of the Africa Institute of South Africa. It is accredited by the South African National Department of Higher Education and Training (DHET) and is indexed in the International Bibliography of Social Science (IBSS). It is a multi-disciplinary journal primarily focusing on African ...

  5. SELECTED PROBLEMS OF LAKES MANAGEMENT IN POLISH WATER LAW RELATED TO THE DIFFERENCES BETWEEN POLISH AND EUROPEAN UNION LEGISLATION

    Directory of Open Access Journals (Sweden)

    MARSZELEWSKI M

    2015-03-01

    Full Text Available Proper management of water resources has got significant social and economic dimension. For this reason, it is an essential element of almost every national law, European Union law, and also international law in a broad sense. Legislative authority, during legislature process, should allway s balance private and public interests to adopt compromised solutions. Furthermore these solutions must be determined mostly by hydrology to be appropriate to the nature of waters and environment. Because of mentioned issues, it is very undesirable state of affairs when law simply does not fit to the object of its regulation. In Water Law Act of 2001 Polish legislator classifies lakes, depending upon the type of watercourse (natural or man-made flowing into or out of the lake, among either flowing water or stagnant one. This regulation is against hydrological classification of lakes. Moreover this legal act introduces different treatment of dammed lakes in the context of public access to the lakeshores. Indicated problems have got significant impact on many aspects such as ownership of lakes, obligations of the owners of the lakes, lakes and environmental protection and, mentioned above, right to public acces to the lakes.

  6. Computer-Controlled Cylindrical Polishing Process for Development of Grazing Incidence Optics for Hard X-Ray Region

    Science.gov (United States)

    Khan, Gufran Sayeed; Gubarev, Mikhail; Speegle, Chet; Ramsey, Brian

    2010-01-01

    The presentation includes grazing incidence X-ray optics, motivation and challenges, mid spatial frequency generation in cylindrical polishing, design considerations for polishing lap, simulation studies and experimental results, future scope, and summary. Topics include current status of replication optics technology, cylindrical polishing process using large size polishing lap, non-conformance of polishin lap to the optics, development of software and polishing machine, deterministic prediction of polishing, polishing experiment under optimum conditions, and polishing experiment based on known error profile. Future plans include determination of non-uniformity in the polishing lap compliance, development of a polishing sequence based on a known error profile of the specimen, software for generating a mandrel polishing sequence, design an development of a flexible polishing lap, and computer controlled localized polishing process.

  7. Germanium content in Polish hard coals

    Directory of Open Access Journals (Sweden)

    Makowska Dorota

    2016-01-01

    Full Text Available Due to the policy of the European Union, it is necessary to search for new sources of scarce raw materials. One of these materials is germanium, listed as a critical element. This semi-metal is widely used in the electronics industry, for example in the production of semiconductors, fibre optics and solar cells. Coal and fly ash from its combustion and gasification for a long time have been considered as a potential source of many critical elements, particularly germanium. The paper presents the results of germanium content determination in the Polish hard coal. 23 coal samples of various coal ranks were analysed. The samples were collected from 15 mines of the Upper Silesian Coal Basin and from one mine of the Lublin Coal Basin. The determination of germanium content was performed with the use of Atomic Absorption Spectrometry with Electrothermal Atomization (GFAAS. The investigation showed that germanium content in the analysed samples was at least twice lower than the average content of this element in the hard coals analysed so far and was in the range of 0.08 ÷ 1.28 mg/kg. Moreover, the content of Ge in the ashes from the studied coals does not exceed 15 mg/kg, which is lower than the average value of Ge content in the coal ashes. The highest content of this element characterizes coals of the Lublin Coal Basin and young coals type 31 from the Vistula region. The results indicate a low utility of the analysed coal ashes as a source of the recovery of germanium. On the basis of the analyses, the lack of the relationship between the content of the element and the ash content in the tested coals was noted. For coals of the Upper Silesian Coal Basin, the relationship between the content of germanium in the ashes and the depth of the seam was observed.

  8. Landscape-Scale Disturbance: Insights into the Complexity of Catchment Hydrology in the Mountaintop Removal Mining Region of the Eastern United States

    Directory of Open Access Journals (Sweden)

    Andrew J. Miller

    2016-07-01

    Full Text Available Few land disturbances impact watersheds at the scale and extent of mountaintop removal mining (MTM. This practice removes forests, soils and bedrock to gain access to underground coal that results in likely permanent and wholesale changes that impact catchment hydrology, geochemistry and ecosystem health. MTM is the dominant driver of land cover changes in the central Appalachian Mountains region of the United States, converting forests to mine lands and burying headwater streams. Despite its dominance on the landscape, determining the hydrological impacts of MTM is complicated by underground coal mines that significantly alter groundwater hydrology. To provide insight into how coal mining impacts headwater catchments, we compared the hydrologic responses of an MTM and forested catchment using event rainfall-runoff analysis, modeling and isotopic approaches. Despite similar rainfall characteristics, hydrology in the two catchments differed in significant ways, but both catchments demonstrated threshold-mediated hydrologic behavior that was attributed to transient storage and the release of runoff from underground mines. Results suggest that underground mines are important controls for runoff generation in both obviously disturbed and seemingly undisturbed catchments and interact in uncertain ways with disturbance from MTM. This paper summarizes our results and demonstrates the complexity of catchment hydrology in the MTM region.

  9. Insight into the conformational stability of membrane-embedded BamA using a combined solution and solid-state NMR approach

    Energy Technology Data Exchange (ETDEWEB)

    Sinnige, Tessa; Houben, Klaartje [Utrecht University, NMR Spectroscopy, Department of Chemistry, Faculty of Science, Bijvoet Center for Biomolecular Research (Netherlands); Pritisanac, Iva [Physical and Theoretical Chemistry Laboratory (United Kingdom); Renault, Marie [Institute of Pharmacology and Structural Biology (France); Boelens, Rolf; Baldus, Marc, E-mail: m.baldus@uu.nl [Utrecht University, NMR Spectroscopy, Department of Chemistry, Faculty of Science, Bijvoet Center for Biomolecular Research (Netherlands)

    2015-04-15

    The β-barrel assembly machinery (BAM) is involved in folding and insertion of outer membrane proteins in Gram-negative bacteria, a process that is still poorly understood. With its 790 residues, BamA presents a challenge to current NMR methods. We utilized a “divide and conquer” approach in which we first obtained resonance assignments for BamA’s periplasmic POTRA domains 4 and 5 by solution NMR. Comparison of these assignments to solid-state NMR (ssNMR) data obtained on two BamA constructs including the transmembrane domain and one or two soluble POTRA domains suggested that the fold of POTRA domain 5 critically depends on the interface with POTRA 4. Using specific labeling schemes we furthermore obtained ssNMR resonance assignments for residues in the extracellular loop 6 that is known to be crucial for BamA-mediated substrate folding and insertion. Taken together, our data provide novel insights into the conformational stability of membrane-embedded, non-crystalline BamA.

  10. The study of optimization on process parameters of high-accuracy computerized numerical control polishing

    Science.gov (United States)

    Huang, Wei-Ren; Huang, Shih-Pu; Tsai, Tsung-Yueh; Lin, Yi-Jyun; Yu, Zong-Ru; Kuo, Ching-Hsiang; Hsu, Wei-Yao; Young, Hong-Tsu

    2017-09-01

    Spherical lenses lead to forming spherical aberration and reduced optical performance. Consequently, in practice optical system shall apply a combination of spherical lenses for aberration correction. Thus, the volume of the optical system increased. In modern optical systems, aspherical lenses have been widely used because of their high optical performance with less optical components. However, aspherical surfaces cannot be fabricated by traditional full aperture polishing process due to their varying curvature. Sub-aperture computer numerical control (CNC) polishing is adopted for aspherical surface fabrication in recent years. By using CNC polishing process, mid-spatial frequency (MSF) error is normally accompanied during this process. And the MSF surface texture of optics decreases the optical performance for high precision optical system, especially for short-wavelength applications. Based on a bonnet polishing CNC machine, this study focuses on the relationship between MSF surface texture and CNC polishing parameters, which include feed rate, head speed, track spacing and path direction. The power spectral density (PSD) analysis is used to judge the MSF level caused by those polishing parameters. The test results show that controlling the removal depth of single polishing path, through the feed rate, and without same direction polishing path for higher total removal depth can efficiently reduce the MSF error. To verify the optical polishing parameters, we divided a correction polishing process to several polishing runs with different direction polishing paths. Compare to one shot polishing run, multi-direction path polishing plan could produce better surface quality on the optics.

  11. Infestation of Polish Agricultural Soils by Plasmodiophora Brassicae Along The Polish-Ukrainian Border

    Directory of Open Access Journals (Sweden)

    Jędryczka Małgorzata

    2014-07-01

    Full Text Available There has been a rapid, worldwide increase in oilseed rape production that has resulted in enormous intensification of oilseed rape cultivation, leading to tight rotations. This in turn, has caused an accumulation of pests as well as foliar and soil-borne diseases. Recently, clubroot has become one of the biggest concerns of oilseed rape growers. Clubroot is caused by the soil-borne protist Plasmodiophora brassicae Woronin. The pathogen may be present in groundwater, lakes, and irrigation water used in sprinkling systems. It can be easily transmitted from one field to another not only by water, but also by soil particles and dust transmitted by wind and on machinery. The aim of our overall study was to check for P. brassicae infestation of Polish agricultural soils. This paper presents the 2012 results of a study performed along the Polish-Ukrainian border in two provinces: Lublin (Lubelskie Voivodeship and the Carpathian Foothills (Podkarpackie Voivodeship, in south-east Poland. Monitoring was done in 11 counties, including nine rural and two municipal ones. In total, 40 samples were collected, out of which 36 were collected from fields located in rural areas and four from municipal areas, with two per municipal region. Each sample was collected at 8-10 sites per field, using a soil auger. The biotest to detect the presence of P. brassicae was done under greenhouse conditions using seedlings of the susceptible Brassicas: B. rapa ssp. pekinensis and the Polish variety of oilseed rape B. napus cv. Monolit. Susceptible plants grown in heavily infested soils produced galls on their roots. A county was regarded as free from the pathogen, if none of the bait plants became infected. The pathogen was found in three out of 40 fields monitored (7.5% in the Carpathian Foothill region. The fields were located in two rural counties. The pathogen was not found in Lublin province, and was also not detected in any of the municipal counties. The detection with

  12. Experimental Study on Abrasive Waterjet Polishing of Hydraulic Turbine Blades

    International Nuclear Information System (INIS)

    Khakpour, H; Birglenl, L; Tahan, A; Paquet, F

    2014-01-01

    In this paper, an experimental investigation is implemented on the abrasive waterjet polishing technique to evaluate its capability in polishing of surfaces and edges of hydraulic turbine blades. For this, the properties of this method are studied and the main parameters affecting its performance are determined. Then, an experimental test-rig is designed, manufactured and tested to be used in this study. This test-rig can be used to polish linear and planar areas on the surface of the desired workpieces. Considering the number of parameters and their levels, the Taguchi method is used to design the preliminary experiments. All experiments are then implemented according to the Taguchi L 18 orthogonal array. The signal-to-noise ratios obtained from the results of these experiments are used to determine the importance of the controlled polishing parameters on the final quality of the polished surface. The evaluations on these ratios reveal that the nozzle angle and the nozzle diameter have the most important impact on the results. The outcomes of these experiments can be used as a basis to design a more precise set of experiments in which the optimal values of each parameter can be estimated

  13. The social shaping of innovation in polish companies

    DEFF Research Database (Denmark)

    Lorentzen, Anne

    2003-01-01

    The paper deals with strategies of innovation in Polish manufacturing companies. The point of departure is a theoretical framework of enterprise level innovation, and of the factors forming strategies of innovation on enterprise level. The paper analyses evidence from 23 Polish companies and pres......The paper deals with strategies of innovation in Polish manufacturing companies. The point of departure is a theoretical framework of enterprise level innovation, and of the factors forming strategies of innovation on enterprise level. The paper analyses evidence from 23 Polish companies...... and presents two cases more in detail. The analysis shows that the Polish companies have all been quite innovative, mostly in relation to product innovation. They choose innovation strategies, which are incremental more than radical, and they tend to differentiate their product range rather than to specialise....... They consider quality development a must in the fight for market shares and they adapt equipment and organisation to this goal. The factors forming and determining the strategies of the companies count the technological knowledge and expertise of the owner/founder, the structural changes of the market...

  14. [Adhesion of oral microorganisms on dental porcelain polished and glazed].

    Science.gov (United States)

    Wang, Yi-ning; Wen, Guo-jiang; Shi, Bin; Pan, Xin-hua

    2003-09-01

    This study compared the roughness of porcelain polished or glazed surfaces and the adhesion of oral streptococcus mutans to them in vitro. 30 porcelain samples were made. Porcelain samples in group A were polished with diamond paste. Porcelain samples were glazed in group B and were polished with Al2O3 (240#) bur in group C. Their roughness values were measured by profilometer. Standardized cell suspensions were incubated with test samples for one hour at 37 degrees C, then retained cells were counted by image analysis (percentage area of a microscopic field covered by cells). Roughness values of group A, B, C were respectively (0.1987 +/- 0.057) microm, (0.1990 +/- 0.091) microm, (0.4260 +/- 0.174) microm. There was no significantly difference between group A and group B. The roughness samples in group C were significantly rougher than that in the other groups. The amount of retained cells in group A, group B, group C was respectively (15.92 +/- 4.37)%, (16.39 +/- 6.31)% and (41.48 +/- 12.1)%. There was no significant difference between the cell adhesion on porcelain surface glazed and polished, but more bacteria adhered on the porcelain surface in group C. Porcelain surface polished treatment was clinically acceptable compared with its glazed. They all exhibited the least amount of bacteria adhesion. The more porcelain surface was rough, the more bacteria adhered on it.

  15. Initial polishing time affects gloss retention in resin composites.

    Science.gov (United States)

    Waheeb, Nehal; Silikas, Nick; Watts, David

    2012-10-01

    To determine the effect of finishing and polishing time on the surface gloss of various resin-composites before and after simulated toothbrushing. Eight representative resin-composites (Ceram X mono, Ceram X duo, Tetric EvoCeram, Venus Diamond, EsteliteSigma Quick, Esthet.X HD, Filtek Supreme XT and Spectrum TPH) were used to prepare 80 disc-shaped (12 mm x 2 mm) specimens. The two step system Venus Supra was used for polishing the specimens for 3 minutes (Group A) and 10 minutes (Group B). All specimens were subjected to 16,000 cycles of simulated toothbrushing. The surface gloss was measured after polishing and after brushing using the gloss meter. Results were evaluated using one way ANOVA, two ways ANOVA and Dennett's post hoc test (P = 0.05). Group B (10-minute polishing) resulted in higher gloss values (GV) for all specimens compared to Group A (3 minutes). Also Group B showed better gloss retention compared to Group A after simulated toothbrushing. In each group, there was a significant difference between the polished composite resins (P gloss after the simulated toothbrushing.

  16. Polish physicians' cooperation with the pharmaceutical industry and its potential impact on public health.

    Directory of Open Access Journals (Sweden)

    Marta Makowska

    Full Text Available This article aims to describe how Polish physicians cooperate with the pharmaceutical industry and show how this relationship may pose a threat to public health.It considers the results of an online survey of 379 physicians. The survey was hosted by surveymonkey.com with links from a Polish physicians' website (Medycyna Praktyczna between 29 October 2013 and 31 December 2013. The sample was purposive, respondents having to be physicians working in Poland.The majority of respondents (96.8% said that they had talked with pharmaceutical sales representatives (PSRs in their practice, with 85% saying that they had had regular contact with them. Despite the existing legal ban in Poland, 35% of respondents admitted that they had usually met with PSRs in their office during working hours. As many as 81.8% of surveyed doctors said that they had taken part in an educational meeting organized by the pharmaceutical industry at least once during the 12 months preceding the study. A majority of the respondents (72.3% said they trusted the information provided by PSRs. Over one third of respondents (36.4% claimed that Polish doctors accepted gifts of a type that they should not accept according to Polish law.The study showed that Polish physicians cooperate in different ways with pharmaceutical companies and have frequent contact with them. This can influence their knowledge and doctors whose knowledge of drugs is based mainly on information from pharmaceutical industry materials may prescribe medicines in a biased way, possibly exposing their patients to sub-optimal treatments and burdening both their patients and the state budget with unnecessary costs. Lack of trust in doctors and pharmaceutical companies have other implications too: there may be a decline of faith in the efficacy of therapy and patients may be encouraged to engage in self-diagnosis and self-treatment. For these reasons it is necessary to increase transparency and strengthen the ethical

  17. Polish physicians' cooperation with the pharmaceutical industry and its potential impact on public health.

    Science.gov (United States)

    Makowska, Marta

    2017-01-01

    This article aims to describe how Polish physicians cooperate with the pharmaceutical industry and show how this relationship may pose a threat to public health. It considers the results of an online survey of 379 physicians. The survey was hosted by surveymonkey.com with links from a Polish physicians' website (Medycyna Praktyczna) between 29 October 2013 and 31 December 2013. The sample was purposive, respondents having to be physicians working in Poland. The majority of respondents (96.8%) said that they had talked with pharmaceutical sales representatives (PSRs) in their practice, with 85% saying that they had had regular contact with them. Despite the existing legal ban in Poland, 35% of respondents admitted that they had usually met with PSRs in their office during working hours. As many as 81.8% of surveyed doctors said that they had taken part in an educational meeting organized by the pharmaceutical industry at least once during the 12 months preceding the study. A majority of the respondents (72.3%) said they trusted the information provided by PSRs. Over one third of respondents (36.4%) claimed that Polish doctors accepted gifts of a type that they should not accept according to Polish law. The study showed that Polish physicians cooperate in different ways with pharmaceutical companies and have frequent contact with them. This can influence their knowledge and doctors whose knowledge of drugs is based mainly on information from pharmaceutical industry materials may prescribe medicines in a biased way, possibly exposing their patients to sub-optimal treatments and burdening both their patients and the state budget with unnecessary costs. Lack of trust in doctors and pharmaceutical companies have other implications too: there may be a decline of faith in the efficacy of therapy and patients may be encouraged to engage in self-diagnosis and self-treatment. For these reasons it is necessary to increase transparency and strengthen the ethical guidelines

  18. Polish physicians’ cooperation with the pharmaceutical industry and its potential impact on public health

    Science.gov (United States)

    2017-01-01

    Objective This article aims to describe how Polish physicians cooperate with the pharmaceutical industry and show how this relationship may pose a threat to public health. Methods It considers the results of an online survey of 379 physicians. The survey was hosted by surveymonkey.com with links from a Polish physicians’ website (Medycyna Praktyczna) between 29 October 2013 and 31 December 2013. The sample was purposive, respondents having to be physicians working in Poland. Results The majority of respondents (96.8%) said that they had talked with pharmaceutical sales representatives (PSRs) in their practice, with 85% saying that they had had regular contact with them. Despite the existing legal ban in Poland, 35% of respondents admitted that they had usually met with PSRs in their office during working hours. As many as 81.8% of surveyed doctors said that they had taken part in an educational meeting organized by the pharmaceutical industry at least once during the 12 months preceding the study. A majority of the respondents (72.3%) said they trusted the information provided by PSRs. Over one third of respondents (36.4%) claimed that Polish doctors accepted gifts of a type that they should not accept according to Polish law. Conclusions The study showed that Polish physicians cooperate in different ways with pharmaceutical companies and have frequent contact with them. This can influence their knowledge and doctors whose knowledge of drugs is based mainly on information from pharmaceutical industry materials may prescribe medicines in a biased way, possibly exposing their patients to sub-optimal treatments and burdening both their patients and the state budget with unnecessary costs. Lack of trust in doctors and pharmaceutical companies have other implications too: there may be a decline of faith in the efficacy of therapy and patients may be encouraged to engage in self-diagnosis and self-treatment. For these reasons it is necessary to increase transparency

  19. TYPOLOGY OF THE REALITY STATUS CATEGORY IN SELECTED LANGUAGES. IS THE HABITUAL IN POLISH AN INSTANCE OF (IRREALIS OR MODALITY?

    Directory of Open Access Journals (Sweden)

    Paulina Pietras

    2017-10-01

    Full Text Available The present article is aimed at examining the category of the reality status by discussing the dichotomy “realis / irrealis” in the context of the categories of modality, habituality and futurity. Prototype analysis is juxtaposed with scope analysis, and the category of the habitual is discussed from the typological perspective as well as from the perspective of its connection with the category of futurity. The paper presents aspect diversity of habituals (perfective and imperfective aspect and its contextual implications as well as the differentiation between the habitual and modality. A special focus is on the prototype analysis and its application instances in Polish, English and Hebrew. The primary objective of the paper is to show that, although it is possible to treat irrealis as notional category, the habituals in Polish and many other Slavic languages (e.g. Czech should be identified with the modality domain rather than irrealis category. The paper is also an attempt to provide an insight into the distinction between (irrealis and encoding systems of modalities as the habitual aspect displays modal category features in many languages (including Polish.

  20. Laser polishing of niobium for application to superconducting radio frequency cavities

    International Nuclear Information System (INIS)

    Singaravelu, Senthil; Klopf, John Michael; Xu, Chen; Krafft, Geoffrey; Kelley, Michael J.

    2012-01-01

    Superconducting radio frequency niobium cavities are at the heart of an increasing number of particle accelerators. Their performance is dominated by a several nanometer thick layer at the interior surface. Maximizing the smoothness of this surface is critical, and aggressive chemical treatments are now employed to this end. The authors describe laser-induced surface melting as an alternative 'greener' approach. Selection of laser parameters guided by modeling achieved melting that reduced the surface roughness from the fabrication process. The resulting topography was examined by scanning electron microscope and atomic force microscope (AFM). Plots of power spectral density computed from the AFM data give further insight into the effect of laser melting on the topography of the mechanically polished (only) niobium

  1. Using Spline Regression in Semi-Parametric Stochastic Frontier Analysis: An Application to Polish Dairy Farms

    DEFF Research Database (Denmark)

    Czekaj, Tomasz Gerard; Henningsen, Arne

    of specifying an unsuitable functional form and thus, model misspecification and biased parameter estimates. Given these problems of the DEA and the SFA, Fan, Li and Weersink (1996) proposed a semi-parametric stochastic frontier model that estimates the production function (frontier) by non......), Kumbhakar et al. (2007), and Henningsen and Kumbhakar (2009). The aim of this paper and its main contribution to the existing literature is the estimation semi-parametric stochastic frontier models using a different non-parametric estimation technique: spline regression (Ma et al. 2011). We apply...... efficiency of Polish dairy farms contributes to the insight into this dynamic process. Furthermore, we compare and evaluate the results of this spline-based semi-parametric stochastic frontier model with results of other semi-parametric stochastic frontier models and of traditional parametric stochastic...

  2. Restructuring locality: practice, identity and place-making on the German-Polish border

    DEFF Research Database (Denmark)

    Sandberg, Marie

    2016-01-01

    Taking cities as analytical entry points for investigating practice, identity and place-making, this article explores the differential restructurings of locality in the twin cities of Görlitz and Zgorzelec on the German-Polish border. Drawing on ethnographic fieldwork, it shows how the local cities......′ leaderships are attempting to wrestle the cities out of their downmarket positioning in the global economy. Deploying a performative research strategy of methodological relationalism, the article examines intersections between these cities′ strategies of situating local youth within urban regeneration...... and cross-border projects and local youth′s preferences for engaging in other kinds of place-making. By ‘seeing’ the cities in border regions through practices of place-making within the multiscalar processes of urban regeneration, new insights about ‘place’ are generated in which city branding...

  3. BIOGAS - is it chance or risk for the Polish gas industry?

    International Nuclear Information System (INIS)

    Witek, M.

    2008-01-01

    This paper presents the present state and some aspects of strategy development concerning Polish biogas plants. The paper focuses on the biogas plants supplied by agricultural raw materials and its biogas production potential. A perspective of production and usage of bio methane in Poland was discussed. An example of commercial agricultural biogas plant connected with cogeneration and natural gas production in local community in Austria was presented. A possibility of financial support of bio methane projects by various programs of European Union in years 2007-2013 was analyzed. Special attention in analysis was given to perspective of possible bio methane production in Poland. (author)

  4. Monitoring of the stability of underground workings in Polish copper mines conditions

    Science.gov (United States)

    Fuławka, Krzysztof; Mertuszka, Piotr; Pytel, Witold

    2018-01-01

    One of the problems associated with the excavation of deposit in underground mines is the local disturbance in a state of unstable equilibrium results in the sudden release of energy, mainly in the form of roof falls. The scale and intensity of this type of events depends on a number of factors. To minimize the risk of instability occurrence, continuous observations of the roof strata condition are recommended. Different roof strata observation methods used in the Polish copper mines have been analysed within the framework of presented paper. In addition, selected prospective methods, which could significantly increase efficiency of rock fall prevention are presented.

  5. Materials of All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection

    International Nuclear Information System (INIS)

    2005-01-01

    The All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection is cyclic (in 3 year period) conference being a broad review of state of art and development of all nuclear branches cooperated with industry and other branches of national economy and public life in Poland. The conference has been divided in one plenary session and 6 problem sessions as follow: Environmental protection, earth sciences, protection of cultural objects; Industrial applications; applications in medicine, medical apparatus; measurement methods, simulations, experiment planning; radiation techniques; laboratories, metrology

  6. Some internationl law elements of national nuclear regulations from the Polish point of view

    International Nuclear Information System (INIS)

    Gadkowski, T.

    1992-01-01

    The essential contents of the Polish Nuclear Act from 1986 reflects on one hand needs and possibilities of the industrial use of nuclear energy and, on the other, international obligations of Poland. Poland is a State with a limited activity regarding to industrial use of nuclear energy; the main international-law elements of national nuclear regulations can be described as follows: 1. The good-neighborliness principle concerning the siting of nuclear installations in border areas. 2. An adequate concept of nuclear damage. 3. An adequate concept of liability for nuclear damage. (orig./HSCH)

  7. Materials of 45. Scientific Assembly of Polish Chemical Society. Volumes 1-3

    International Nuclear Information System (INIS)

    2002-01-01

    Scientific assemblies of Polish Chemical Society are the most important chemical meeting organised annually in Poland. Basic as well as application studies in all chemical branches have been extensively presented. The next subjects was proposed as scientific sessions and symposia topics: organic chemistry, inorganic chemistry, physical chemistry, analytical chemistry, technology and chemical engineering, polymer chemistry, solid state chemistry, catalysis, biological chemistry, chemistry and technology of coal, environmental protection, didactics of chemistry, history of chemistry, young scientist forum, flow analysis, and high-energy materials

  8. Polish Revolt of 1863 in Destinies of Old Believers of the Northwest Territory of Russian Empire

    Directory of Open Access Journals (Sweden)

    Александр Юрьевич Бендин

    2011-03-01

    Full Text Available The article is devoted to the problems of a legal status of Old Believers of Russian empire in the middle of 19th century. The comparative analysis of the Russian legislation allows the author to draw a conclusion on religious intolerance of the state and «prevailing» Orthodox Church to the old belief population of empire. The special attention is paid to the position of Old Believers of Northwest Territory who during the Polish revolt in 1863 acted on the side of Russia. The reaction of the territory administration to attempts of Old Believers to expand border of religious freedom is considered in the article.

  9. Materials of jubilee scientific assembly of the Polish Chemical Society, Warsaw'94. Homo chemicus

    International Nuclear Information System (INIS)

    1994-01-01

    The Jubilee Scientific Assembly of the Polish Chemical Society has been held in 1994 in Warsaw. The general view on scientific progress in chemistry in Poland has been presented during plenary session. The conference has been divided into 15 sessions and 3 microsymposia covering the most important research fields in chemistry. Sessions topics were: analytical chemistry, chemistry of solid state materials, physical chemistry, coordination chemistry, medical chemistry, chemistry of metalorganic compounds, inorganic chemistry, organic chemistry, chemistry of polymers, young scientists forum, didactics and history of chemistry, catalysis, crystallochemistry, chemical technology, environment protection. Microsymposia's topics were as follows: chemistry of saccharides, electrochemistry, membranes and membrane processes

  10. The Jewish minority in the Second Polish Republic: the activities of the Board of the Jewish Community in Lvov during the years 1919–1924

    Directory of Open Access Journals (Sweden)

    Koziński Bartosz

    2016-12-01

    Full Text Available The purpose of this article is to analyze data on the functioning of the Jewish Community in Lvov during the years 1919-1924. The indicated problems will enable to show the functioning of the Jewish minority in the conditions of the reviving Polish state - both in socio-political terms, and in the organizational aspect. It is particularly important to show the Jewish minority opinion about the conditions of Second Polish Republic. Additionally, this article will help restore the memory of the individual members of the Jewish community in Lvov. The selected issue is a part of the research conducted on a larger scale, whose aim is to enrich knowledge and overcome the deficit of research in the science of politics on the concept of ethnic policy - proposed in the years 1939-1947 by the Polish government in exile. The fundamental finding of the analysis is the fact, that the Board accepted the Polish state and the dominant role of the Polish nation in the system of democratic political power.

  11. Material removal mechanisms in electrochemical-mechanical polishing of tantalum

    International Nuclear Information System (INIS)

    Gao, F.; Liang, H.

    2009-01-01

    Material removal mechanisms in tantalum chemical-mechanical polishing (CMP) and electrochemical-mechanical polishing (ECMP) were investigated using the single frequency electrochemical impedance spectroscopy (EIS). Through measuring the impedance of the tantalum surface, the single frequency EIS scan made it possible to observe the CMP and ECMP processes in situ. The impedance results presented competing mechanisms of removal and formation of a surface oxide layer of tantalum. Analysis indicated that the thickness of the oxide layer formed during polishing was related to the mechanical power correlated to the friction force and the rotating speed. Furthermore, the rate of growth and removal of the oxide film was a function of the mechanical power. This understanding is beneficial for optimization of CMP and ECMP processes.

  12. Research on Grinding and Polishing Force Control of Compliant Flange

    Directory of Open Access Journals (Sweden)

    Li Chuang

    2015-01-01

    Full Text Available The automation of the grinding and polishing process is important to improve the production efficiency of the part surfaces. In this paper, a new compliant flange mounted on the end of the industrial robots for the robotic grinding and polishing force control is developed. With regard to the non-linear and time-varying problem of the contact force, the mathematical model of the new force control system was presented and the fuzzy PID control strategy was used to drive the proposed system. Especially, the air spring and electric proportional valve is studied to establish the model. The simulation results show that the selected control strategy has quick response and good robustness, which satisfies the real-time requirements of the grinding and polishing force control in processing.

  13. [Polish medical ethics in the period 1945-1980].

    Science.gov (United States)

    Wichrowski, Marek

    2003-01-01

    The purpose of this article is o present that main currents of Polish medical ethics in the years 1945-1980, which the author treats as the 'prehistory' of Poland's contemporary bioethics. The author begins by ascertaining the post-war disappearance of two Polish traditions--that of the Warsaw school of philosopher-physicians (known in the West as the Polish School of Philosophy of Medicine) and the Lwów-Warsaw School of Philosophy. The political system that come into being after 1945 was not conducive to the development of medical ethics, but several clear orientations may be discerned in the utterances of physicians, lawyers, moral technologlans and academic philosophers. The analysis begins with Catholic ethics in its archaic 1950s-vintage form. The author then presents the thinking of ethicians Independent of both the Church and Marxism (the milieu of the journal 'Etyka') as well as the deontological writings of physicians.

  14. Development of clean chemical mechanical polishing systems; Clean CMP system

    Energy Technology Data Exchange (ETDEWEB)

    Tsujimura, M.; Hosokawa, M. [Ebara Corp., Tokyo (Japan)

    1998-10-20

    Described herein are clean chemical mechanical polishing (CMP) systems developed by Ebara. A CMP system needs advanced peripheral techniques, in addition to those for grinding adopted by the conventional system, in order to fully exhibit its inherent functions. An integrated design concept is essential for the CMP steps, including slurry supplying, polishing, washing, process controlling and waste fluid treatment. The Ebara has adopted a standard concept `Clean CMP, dry-in and dry-out of wafers,` and provided world`s highest grades of techniques for inter-layer insulating film, shallow trench isolation, plug and wiring. The head for the polishing module is specially designed by FEM, to improve homogeneity of wafers from the center to edges. The dresser is also specially designed, to improve pad surface topolody after dressing. A slurry dipsersing method is developed to reduce slurry consumption. Various washing modules, designed to have the same external shape, can be allocated to various functions. 10 figs.

  15. Polish country study to address climate change: Strategies of the GHG`s emission reduction and adaptation of the Polish economy to the changed climate. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-01

    The Polish Country Study Project was initiated in 1992 as a result of the US Country Study Initiative whose objective was to grant the countries -- signatories of the United Nations` Framework Convention on Climate Change -- assistance that will allow them to fulfill their obligations in terms of greenhouse gases (GHG`s) inventory, preparation of strategies for the reduction of their emission, and adapting their economies to the changed climatic conditions. In February 1993, in reply to the offer from the United States Government, the Polish Government expressed interest in participation in this program. The Study proposal, prepared by the Ministry of Environmental Protection, Natural Resources and Forestry was presented to the US partner. The program proposal assumed implementation of sixteen elements of the study, encompassing elaboration of scenarios for the strategy of mission reduction in energy sector, industry, municipal management, road transport, forestry, and agriculture, as well as adaptations to be introduced in agriculture, forestry, water management, and coastal management. The entire concept was incorporated in macroeconomic strategy scenarios. A complementary element was the elaboration of a proposal for economic and legal instruments to implement the proposed strategies. An additional element was proposed, namely the preparation of a scenario of adapting the society to the expected climate changes.

  16. Development of hybrid fluid jet/float polishing process

    Science.gov (United States)

    Beaucamp, Anthony T. H.; Namba, Yoshiharu; Freeman, Richard R.

    2013-09-01

    On one hand, the "float polishing" process consists of a tin lap having many concentric grooves, cut from a flat by single point diamond turning. This lap is rotated above a hydrostatic bearing spindle of high rigidity, damping and rotational accuracy. The optical surface thus floats above a thin layer of abrasive particles. But whilst surface texture can be smoothed to ~0.1nm rms (as measured by atomic force microscopy), this process can only be used on flat surfaces. On the other hand, the CNC "fluid jet polishing" process consists of pumping a mixture of water and abrasive particles to a converging nozzle, thus generating a polishing spot that can be moved along a tool path with tight track spacing. But whilst tool path feed can be moderated to ultra-precisely correct form error on freeform optical surfaces, surface finish improvement is generally limited to ~1.5nm rms (with fine abrasives). This paper reports on the development of a novel finishing method, that combines the advantages of "fluid jet polishing" (i.e. freeform corrective capability) with "float polishing" (i.e. super-smooth surface finish of 0.1nm rms or less). To come up with this new "hybrid" method, computational fluid dynamic modeling of both processes in COMSOL is being used to characterize abrasion conditions and adapt the process parameters of experimental fluid jet polishing equipment, including: (1) geometrical shape of nozzle, (2) position relative to the surface, (3) control of inlet pressure. This new process is aimed at finishing of next generation X-Ray / Gamma Ray focusing optics.

  17. Involving Members of the Public in Health Economics Research: Insights from Selecting Health States for Valuation to Estimate Quality-Adjusted Life-Year (QALY) Weights.

    Science.gov (United States)

    Goodwin, Elizabeth; Boddy, Kate; Tatnell, Lynn; Hawton, Annie

    2018-04-01

    describe how we designed a way of involving people in a particular piece of health economics research.The aim of the work was to produce descriptions of different states of health experienced by people with multiple sclerosis (MS). These descriptions have since been rated in terms of how good or bad they are in a way that can be used by the National Institute for Health and Care Excellence (NICE) to make decisions about what services to fund on the NHS.We formed a panel of three people with MS, and designed a task to help the group produce health descriptions likely to be experienced by people with MS. After discussion about jargon, and working together to find more layman's terms, the task worked well, and can be adapted to produce health descriptions for any condition.We identified some key themes about working together that give insights into how members of the public can be involved in health economics research, and show the importance of their involvement in improving the relevance of this research.

  18. Polish Perceptions on the Immigration Influx: a Critical Analysis

    Directory of Open Access Journals (Sweden)

    Kinga Hódor

    2017-02-01

    Full Text Available The article addresses the issue of Poles’ attitude to the problem of the influx of migrants to Poland in the context of the migration crisis, which Europe has to face today. The issues discussed in the present paper are aimed to illustrate the characteristic features specific to Poles’ attitudes in favor of or against the process of influx of migrants to the E.U. Member States or Poland. The analysis covers both positive and negative aspects of migration to Poland, which have been most often indicated by Poles with respects to migrants. On the one hand, they include fears with regard to national security, potential conflicts of cultural and religious background, fear of the alleged loss of jobs to migrants and their preying on the country’s social security system. All of the above result in anti-migration demonstrations and the language of hatred. On the other hand, positive aspects of the migration influx are believed to consist in cultural enrichment, benefits for the labor market resulting from the inflow of both qualified professionals and laborers with lower pay expectations in comparison to Polish workers and believing that migrants might be the chance of minimize the negative effects of the demographic crisis. The supporters of helping migrants also point out the issue of solidarity and sympathy for the victims and the fact that in the past it was the Poles who received support from other countries in Poland’s difficult moments. Thus, extending such help to others may prove to be beneficial in the future. The present paper is based on academic articles, internet sources and statistical data, which all reveal a division into two camps: supporters and opponents of receiving migrants in Poland, which prevents determining Poland’s definitive stance on this issue. All the aspects of the problem discussed in the paper are undoubtedly a basis for further analysis.

  19. Barriers and Limitations of Mentoring in Polish Organizations

    Directory of Open Access Journals (Sweden)

    Joanna Mesjasz

    2013-09-01

    Full Text Available In Polish organizations one can recognize a lot of barriers in the mentoring implementation. According to the author, at the root of these barriers are hierarchies of values: social, national, organizational, and hierarchies of values represented by individual employees. The purpose of this article is to trace the sources of constraints in the mentoring implementation process. The analysis is carried out on several levels: from the broadest social perspective, through the national to the perspective of the organization. In the article, there are also presented actions that should be taken by Polish organizations to overcome barriers and constraints in the mentoring implementation process.

  20. Recurrent APC gene mutations in Polish FAP families

    Directory of Open Access Journals (Sweden)

    Pławski Andrzej

    2007-12-01

    Full Text Available Abstract The molecular diagnostics of genetically conditioned disorders is based on the identification of the mutations in the predisposing genes. Hereditary cancer disorders of the gastrointestinal tracts are caused by mutations of the tumour suppressor genes or the DNA repair genes. Occurrence of recurrent mutation allows improvement of molecular diagnostics. The mutation spectrum in the genes causing hereditary forms of colorectal cancers in the Polish population was previously described. In the present work an estimation of the frequency of the recurrent mutations of the APC gene was performed. Eight types of mutations occurred in 19.4% of our FAP families and these constitute 43% of all Polish diagnosed families.

  1. Mechanistic, kinetic, and processing aspects of tungsten chemical mechanical polishing

    Science.gov (United States)

    Stein, David

    This dissertation presents an investigation into tungsten chemical mechanical polishing (CMP). CMP is the industrially predominant unit operation that removes excess tungsten after non-selective chemical vapor deposition (CVD) during sub-micron integrated circuit (IC) manufacture. This work explores the CMP process from process engineering and fundamental mechanistic perspectives. The process engineering study optimized an existing CMP process to address issues of polish pad and wafer carrier life. Polish rates, post-CMP metrology of patterned wafers, electrical test data, and synergy with a thermal endpoint technique were used to determine the optimal process. The oxidation rate of tungsten during CMP is significantly lower than the removal rate under identical conditions. Tungsten polished without inhibition during cathodic potentiostatic control. Hertzian indenter model calculations preclude colloids of the size used in tungsten CMP slurries from indenting the tungsten surface. AFM surface topography maps and TEM images of post-CMP tungsten do not show evidence of plow marks or intergranular fracture. Polish rate is dependent on potassium iodate concentration; process temperature is not. The colloid species significantly affects the polish rate and process temperature. Process temperature is not a predictor of polish rate. A process energy balance indicates that the process temperature is predominantly due to shaft work, and that any heat of reaction evolved during the CMP process is negligible. Friction and adhesion between alumina and tungsten were studied using modified AFM techniques. Friction was constant with potassium iodate concentration, but varied with applied pressure. This corroborates the results from the energy balance. Adhesion between the alumina and the tungsten was proportional to the potassium iodate concentration. A heuristic mechanism, which captures the relationship between polish rate, pressure, velocity, and slurry chemistry, is presented

  2. Implementation of the Bulgarian-Polish online dictionary

    Directory of Open Access Journals (Sweden)

    Ludmila Dimitrova

    2015-11-01

    Full Text Available Implementation of the Bulgarian-Polish online dictionary The paper describes the implementation of an online Bulgarian-Polish dictionary as a technological tool for applications in digital humanities. This bilingual digital dictionary is developed in the frame of the joint research project “Semantics and Contrastive Linguistics with a focus on a bilingual electronic dictionary” between IMI-BAS and ISS-PAS, supervised by L. Dimitrova (IMI-BAS and V. Koseska-Toszewa (ISS-PAS. In addition, the main software tools for web-presentation of the dictionary are described briefly.

  3. Confocal Raman spectrocopy for the analysis of nail polish evidence.

    Science.gov (United States)

    López-López, Maria; Vaz, Joana; García-Ruiz, Carmen

    2015-06-01

    Nail polishes are cosmetic paints that may be susceptible of forensic analysis offering useful information to assist in a crime reconstruction. Although the nail polish appearance could allow a quick visual identification of the sample, this analysis is subjected to the perception and subjective interpretation of the forensic examiner. The chemical analysis of the nail polishes offers great deal of information not subjected to analyst interpretation. Confocal Raman spectroscopy is a well-suited technique for the analysis of paints due to its non-invasive and non-destructive nature and its ability to supply information about the organic and inorganic components of the sample. In this work, 77 regular and gel nail polishes were analyzed with confocal Raman spectroscopy using two laser wavelengths (532 and 780 nm). The sample behavior under the two laser wavelengths and the differences in the spectra taken at different points of the sample were studied for each nail polish. Additionally, the spectra obtained for all the nail polishes were visually compared. The results concluded that the longer laser wavelength prevents sample burning and fluorescence effects; the similarity among the spectra collected within the sample is not directly related with the presence of glitter particles; and 64% of the samples analyzed showed a characteristic spectrum. Additionally, the use of confocal Raman spectroscopy for the forensic analysis of nail polishes evidence in the form of flakes or smudges on different surfaces were studied. The results showed that both types of evidence can be analyzed by the technique. Also, two non-invasive sampling methods for the collection of the evidence from the nails of the suspect or the victim were proposed: (i) to use acetone-soaked cotton swabs to remove the nail varnishes and (ii) to scrape the nail polish from the nail with a blade. Both approaches, each exhibiting advantages and drawbacks in terms of transport and handling were appropriate

  4. International Round Table “Tatar Materials in Polish Archives” (Warsaw, 31st March – 1st April, 2016

    Directory of Open Access Journals (Sweden)

    M.M. Gibatdinov

    2016-12-01

    Full Text Available This article present a short report on the International round table “Tatar materials in Polish archives” organized in Warsaw on March 31 – April 1, 2016. Round table was a result of international scientific cooperation between Marjani Institute of History, Polish Academy of Sciences, University of Warsaw, Institute for Caucasian-, Tatar- and Turkestan Studies (ICATAT. It was a part of the long-term research project “Tatar Materials in Foreign Archives” carried out by the Marjani Institute of History in the framework of State Program of the Republic of Tatarstan “Preserving of Tatar Ethnical Identity (for years 2014–2016.” The following papers was presented on the round table: “On results of recent researches of Tatar materials in Polish archives” by Prof., Dr. Dariusz Kołodziejczyk, Director of the Institute of History, University of Warsaw; “The New Records of Old Heritage – Documents about Tatars from Regional and Private Archives in Polish-German Context”, by Dr. Mieste Hottop-Riecke, Director of ICATAT and Dr. Stephan Theilig, Director of Brandenburg-Preußen Museum Wustrau; “Maniere de Faire la Guerre des Tartares’ as Hybrid War in the Military Art of Crimean and Dobruja Tatars in the Early modern Time”, by Dr. Andrzej Gliwa, University of Warsaw, Department of History, Faculty Member; “Tatar Documents in Archives and Museums in Bialystok” by Dr. Artur Konopacki, Assistant Professor in Faculty of Pedagogy and Psychology, University of Bialystok; ”The first results of international research project ”Yazma Miras – Written Heritage” by Marat Gibatdinov. Participants of round table discussed a possible prospects for future cooperation in the field of researching and digitalizing of Tatar materials from Polish archives. During the conference the meetings with the representatives of Tatar community in Poland and Lithuania was organized, as well as the study visits to the Tatar Mosque and Tatar

  5. Chemical Mechanical Polishing of Ruthenium, Cobalt, and Black Diamond Films

    Science.gov (United States)

    Peethala, Brown Cornelius

    Ta/TaN bilayer serves as the diffusion barrier as well as the adhesion promoter between Cu and the dielectric in 32 nm technology devices. A key concern of future technology devices (layer (vs. a bilayer of Ta/TaN) to act as a barrier. During patterning, they need to be planarized using conventional chemical mechanical polishing (CMP) to achieve a planar surface. However, CMP of these new barrier materials requires novel slurry compositions that provide adequate selectivity towards Cu and dielectric films, and minimize galvanic corrosion. Apart from the application as a barrier, Ru also has been proposed as a lower electrode material in metal-insulator-metal capacitors where high (> 50 nm/min) Ru removal rates (RRs) are required and as a stop layer in magnetic recording head fabrication where low (hydroxide (KOH). It was also determined that increased the ionic strength is not responsible for the observed increase in Ru removal rate. Benzotirazole (BTA) and ascorbic acid were added to the slurry to reduce the open circuit potential (Eoc) difference between Cu and Ru to ˜20 mV from about 550 mV in the absence of additives. A removal mechanism with KIO4 as the oxidizing agent is proposed based on the formation of several ruthenium oxides, some of which formed residues on the polishing pad below a pH of ˜7. Next, a colloidal silica-based slurry with hydrogen peroxide (H 2O2) as the oxidizer (1 wt%), and arginine (0.5 wt%) as the complexing agent was developed to polish Co at pH 10. The Eoc between Cu and Co at the above conditions was reduced to ˜20 mV compared to ˜250 mV in the absence of additives, suggestive of reduced galvanic corrosion during the Co polishing. The slurry also has the advantages of good post-polish surface quality at pH 10, and no dissolution rate. BTA at a concentration of 5mM in this slurry inhibited Cu dissolution rates and yielded a Cu/Co RR ratio of ˜0.8:1 while the open potential difference between Cu and Co was further reduced to ˜10

  6. Materials of 44. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry

    International Nuclear Information System (INIS)

    2001-01-01

    Scientific assemblies of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry are the most important chemical meeting organised annually in Poland. Basic as well as application studies in all chemical branches have been extensively presented. The next subjects was proposed as scientific sessions and symposia topics: solid state chemistry; didactics of chemistry; electrochemistry; biologically active compounds; geochemistry; organic chemistry; physical chemistry; environment quality and protection; coordination chemistry; chemical technology; polymers; explosive materials; analytical chemistry; theoretical chemistry

  7. The impact of medical tourism on the quality of organizational and functional changes in the Polish healthcare system

    OpenAIRE

    Olkiewicz, Marcin

    2016-01-01

    The role of Medical Tourism in the process of a complex satisfaction of the prosumers and the impact played in the organizational and functional changes in the Polish healthcare system. The analysis of the literature on the subject as well as an analysis of the documentation were the inspiration to write this work. The main emphasis was put on stating the conditions stimulating the development of this sector of the economy as well as the risk factors determining the quality of pro...

  8. Materials of 47. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry. Volume 3

    International Nuclear Information System (INIS)

    2004-01-01

    Scientific assemblies of Polish Chemical Society are the most important chemical meeting organised annually in Poland. Basic as well as application studies in all chemical branches have been extensively presented. The next subjects was proposed as scientific sessions and symposia topics: organic chemistry, inorganic chemistry, physical chemistry, analytical chemistry, technology and chemical engineering, polymer chemistry, solid state chemistry, catalysis, biological chemistry, chemistry and technology of coal, environmental protection, didactics of chemistry, history of chemistry, young scientist forum

  9. Simulation and analysis of an alternative kinematics for improving the polishing uniformity over the surface of polished tiles

    Directory of Open Access Journals (Sweden)

    Weingaertner, W. L.

    2010-10-01

    Full Text Available The present work investigates the possibility of adopting a new kinematics at the industrial polishing lines of porcelain stoneware tile. An alternative motion of the transverse oscillation of the polishing heads is proposed, in which no radical changes in the industries facilities are required. The basic idea is to replace the purely sinus motion of the polishing heads by a rather trapezoid wavelike motion. In theory this could be achieved simply by adopting regular delays at the transverse oscillation motion. Consequences of this alternative kinematics were quantitatively analyzed considering the spatial homogeneity of polishing expected for tiles. Such homogeneity was represented by the coefficient of variation of the distribution of polishing time over the surface, which was in turn determined by means of computational simulations, taking into account the effect of multiple polishing heads.

    El presente trabajo investiga la posibilidad de adoptar una nueva cinemática en las líneas de pulido industrial de baldosas de gres porcelánico. Se propone una propuesta alternativa de la oscilación transversal de los cabezales pulidores, en el que no hay cambios radicales en las instalaciones de las industrias son necesarias. La idea básica consiste en sustituir el movimiento totalmente del seno de los cabezales pulidores por un movimiento ondulatorio trapezoide. En teoría, esto podría lograrse sólo mediante la adopción de los habituales retrasos en el movimiento de oscilación transversal. las consecuencias de esta cinemática fueron analizados cuantitativamente, teniendo en cuenta la homogeneidad espacial de pulido. Tal homogeneidad fora representada por el coeficiente de variación de la distribución de lo tiempo de pulido en la superficie, determinada por medio de simulaciones computacionales, teniendo también en cuenta el efecto de pulido de las cabezas múltiples.

  10. The View of Lithuanian Statehood Held by the Polish Underground during 1939-1944

    OpenAIRE

    Bubnys, Arūnas

    2006-01-01

    The article investigates the attitudes of Polish underground actors towards the statehood of Lithuania, its territorial integrity, and Lithuanian-Polish relations during the World War II. The author draws the conclusion that Polish underground political structures expressed a hostile and prejudiced attitude towards Lithuania. All the blame and responsibility for bad mutual relations is put on Lithuania and Lithuanians. Polish underground actors living in Vilnija were extremely hostile towards...

  11. Semi-strong informational efficiency in the Polish foreign exchange market

    OpenAIRE

    Luksz Goczek

    2015-01-01

    During the financial crisis a notion that the Polish exchange rate is not determined effectively was very dominant, because of a contagion effect of the global financial crisis on the Polish economy. In addition, many foreign exchange market analysts explained developments in the Polish exchange market trough a hypothesis that the Polish zloty exchange rate follows other exchange rates. This contradicts market efficiency as this would lead to profitable arbitrage possibility based on past inf...

  12. Effect of Polishing Systems on Surface Roughness and Topography of Monolithic Zirconia.

    Science.gov (United States)

    Goo, C L; Yap, Auj; Tan, Kbc; Fawzy, A S

    2016-01-01

    This study evaluated the effect of different chairside polishing systems on the surface roughness and topography of monolithic zirconia. Thirty-five monolithic zirconia specimens (Lava PLUS, 3M ESPE) were fabricated and divided into five groups of seven and polished with the following: Group 1 (WZ)-Dura white stone followed by Shofu zirconia polishing kit; Group 2 (SZ)-Shofu zirconia polishing kit; Group 3 (CE)-Ceramiste porcelain polishers; Group 4 (CM)-Ceramaster porcelain polishers; and Group 5 (KZ)-Komet ZR zirconia polishers. All specimens were ground with a fine-grit diamond bur prior to polishing procedures to simulate clinical finishing. Baseline and post-polishing profilometric readings were recorded and delta Ra values (difference in mean surface roughness before and after polishing) were computed and analyzed using one-way analysis of variance and Scheffe post hoc test (pSEM) images of the ground but unpolished and polished specimens were acquired. Delta Ra values ranged from 0.146 for CE to 0.400 for KZ. Delta Ra values for KZ, WZ, and SZ were significantly greater than for CE. Significant differences in delta Ra values were also observed between KZ and CM. The SEM images obtained were consistent with the profilometric findings. Diamond-impregnated polishing systems were more effective than silica carbide-impregnated ones in reducing the surface roughness of ground monolithic zirconia.

  13. Study on combined polishing process of aspherical aluminum mirrors

    Science.gov (United States)

    Deng, Jinqiu; Peng, Xiaoqiang; Hu, Hao; Ge, Kunpeng

    2017-10-01

    The aluminum mirrors are widely used as important optical components in some vital fields such as astronomical instruments or military installations due to the unique advantages of aluminum alloy. In order to simplify the structure of optical system and improve the performance at the same time, it's a tendency that the optics will be designed to aspherical or other freeform shapes. However, the traditional techniques are falling to have adequate abilities to deal with the increasing demands of aluminum optics. For example, the tool marks leaved on the surface from single point diamond turning (SPDT) has obvious adverse effects to optical system. The deterministic and sub-aperture polishing process has showed the potential to fabricate complex shapes over the few years. But it's still recognized as a problem to polish bare aluminum directly because of its soft surface and active chemical characteristics. Therefore, a combination of magnetorheological finishing (MRF) and small tool polishing (STP) is applied to obtain high performance aluminum optics in this paper. A paraboloid aluminum mirror was polished with this proposed method, and the results showed that the surface texture of the sample is restrained from rms 0.409λ (λ=632.8nm) to rms 0.025λ, and the surface roughness is improved from average Ra 6 7nm to Ra 3 4nm.

  14. Using Nail Polish to Teach about Gender and Homophobia

    Science.gov (United States)

    Edwards, Nelta M.

    2010-01-01

    How might teachers help students investigate the relationship between gender and homophobia? This article describes an exercise that uses fingernail polish to do just that. The authors uses anecdotal evidence to describe the exercise in which students pair with someone of the opposite gender and paint each other's fingernails. Additionally, the…

  15. In-situ photopatterning of hydrogel microarrays in polished microchips

    NARCIS (Netherlands)

    Gümüscü, B.; van den Berg, Albert; Eijkel, Jan C.T.

    2015-01-01

    We present a fabrication method which enables simple and eproducible photopatterning of micron- sized hydrogel arrays inside closed microchips. To achieve this, the glass cover of the microchip is thinned by mechanical grinding and polishing. This procedure reduces the spacing between the photomask

  16. Bioethanol productions from rice polish by optimization of dilute acid ...

    African Journals Online (AJOL)

    Lignocellulose materials are abundant renewable resource for the production of biofuel from fermentative organism (Sacchromyces cervesiae). Rice polish is cheapest and abundant lignocelluloses resource and has potential to produce bioethanol. The main steps for the conversion of biomass into glucose required dilute ...

  17. An operational map of the Polish Coastal Front 1970

    DEFF Research Database (Denmark)

    Nielsen, Thomas Theis; Svenningsen, Stig Roar; Tinning, Morten

    2016-01-01

    The map of the Operational Plan for the Coastal Front, from Poland 1970 forms the basis for this paper. The map portraits the blueprint of the combined operational war plans for the Polish military in the late 1960’s and 70’s. It details the offensive against NATO countries and their forces...

  18. Social Interest in The Polish Doctrine of Monument Preservation

    Science.gov (United States)

    Antoszczyszyn, Marek

    2017-10-01

    The paper discusses a controversy surrounding the latest amendment to the text of the Polish Parliament Act Conservation and the Care of Monuments (2015). It is a common dictum that any edifice cannot exist without good foundations. In this particular case of the mentioned above Act, definition of monument appears to be such a basis. A social interest is one of the constituent elements of the definition mentioned above. In the first part of the paper the notion of the social interest expression has been discussed, particularly from national and international points of view. The second part of the paper comprises some examples from the Polish monument preservation experience with the use of comparison method supported by case study. Only three big Polish cities: Warsaw, Wroclaw and Szczecin are involved in the presented case study but it must be emphasized that many other places on Polish territory experienced the same. Basing on the faith of these cities, the results and discussion chapter proves fundamental discrepancy in social interest notion between national and international scopes using some analytical methods. Finally, in the discussion chapter some proposals for the future amendment of monument definition in the Act of Conservation and the Care of Monuments have been provided.

  19. Detection of Polish clinical Aspergillus fumigatus isolates resistant to triazoles

    DEFF Research Database (Denmark)

    Nawrot, Urszula; Kurzyk, Ewelina; Arendrup, Maiken Cavling

    2018-01-01

    We studied the presence of triazole resistance of 121 Aspergillus fumigatus clinical isolates collected in two Polish cities, Warsaw and Wrocław, to determine if resistance is emerging in our country. We identified five itraconazole resistant isolates (4.13%) carrying the TR34/L98H alteration...

  20. Values Education--A Reality or Myth in Polish Schools

    Science.gov (United States)

    Switala, Eugeniusz

    2015-01-01

    The United Nations Decade of Education for Sustainable Development (DESD), which is coming to an end, will offer all kinds of summaries and reflections on this issue. The aim of this paper, strictly related with the goals of the DESD, is to answer the following questions: (1) "Is the Polish school ready to provide values education?"; (2)…

  1. Violation of interest-rate parity: a Polish example

    Science.gov (United States)

    Przystawa, Jerzy; Wolf, Marek

    2000-09-01

    The mechanism of the so-called “Bagsik Oscillator” is presented and discussed. In essence, it is a repeated exploitation of arbitrage opportunities that resulted from a marked departure from the interest-rate parity relationship between the local Polish currency and the western currencies.

  2. Novel ceria-polymer microcomposites for chemical mechanical polishing

    International Nuclear Information System (INIS)

    Coutinho, Cecil A.; Mudhivarthi, Subrahmanya R.; Kumar, Ashok; Gupta, Vinay K.

    2008-01-01

    Abrasive particles are key components in slurries for chemical mechanical polishing (CMP). Since the particle characteristics determine surface quality of wafers during polishing, in this research, novel abrasive composite particles have been developed. These composite particles contain nanoparticles of ceria dispersed within cross-linked, polymeric microspheres such that the average mass fraction of ceria is approximately 50% in the particles. The microspheres are formed by co-polymerization of N-isopropylacrylamide (NIPAM) with 3-(trimethoxysilyl)propyl methacrylate (MPS) and contain interpenetrating (IP) chains of poly(acrylic acid) (PAAc). Infrared spectroscopy, dynamic light scattering, and transmission electron microscopy are employed to characterize the composite particles. Planarization of silicon dioxide wafers is studied on a bench-top CMP tester and the polished surfaces are characterized by ellipsometry, atomic force and optical microscopy. Slurries formed from the composite ceria-polymer particles lead to lower topographical variations and surface roughness than slurries of only ceria nanoparticles even though both slurries achieve similar removal rates of ∼100 nm/min for similar ceria content. Polishing with the novel composite particles gives surfaces devoid of scratches and particle deposition, which makes these particles suitable for the next generation slurries in CMP

  3. Novel ceria-polymer microcomposites for chemical mechanical polishing

    Energy Technology Data Exchange (ETDEWEB)

    Coutinho, Cecil A. [Department of Chemical and Biomedical Engineering, University of South Florida (United States); Mudhivarthi, Subrahmanya R.; Kumar, Ashok [Nanomaterials and Nanomanufacturing Research Center, University of South Florida (United States); Department of Mechanical Engineering, University of South Florida (United States); Gupta, Vinay K. [Department of Chemical and Biomedical Engineering, University of South Florida (United States)], E-mail: vkgupta@eng.usf.edu

    2008-12-30

    Abrasive particles are key components in slurries for chemical mechanical polishing (CMP). Since the particle characteristics determine surface quality of wafers during polishing, in this research, novel abrasive composite particles have been developed. These composite particles contain nanoparticles of ceria dispersed within cross-linked, polymeric microspheres such that the average mass fraction of ceria is approximately 50% in the particles. The microspheres are formed by co-polymerization of N-isopropylacrylamide (NIPAM) with 3-(trimethoxysilyl)propyl methacrylate (MPS) and contain interpenetrating (IP) chains of poly(acrylic acid) (PAAc). Infrared spectroscopy, dynamic light scattering, and transmission electron microscopy are employed to characterize the composite particles. Planarization of silicon dioxide wafers is studied on a bench-top CMP tester and the polished surfaces are characterized by ellipsometry, atomic force and optical microscopy. Slurries formed from the composite ceria-polymer particles lead to lower topographical variations and surface roughness than slurries of only ceria nanoparticles even though both slurries achieve similar removal rates of {approx}100 nm/min for similar ceria content. Polishing with the novel composite particles gives surfaces devoid of scratches and particle deposition, which makes these particles suitable for the next generation slurries in CMP.

  4. Empirical relations of sediment transport prediction in Polish multibanks shore

    International Nuclear Information System (INIS)

    Pruszak, Z.

    1995-01-01

    Qualitative and quantitative description of various elements of bottom sediment movement in Polish multibanks coastal region has been down. Empirical relations linking transport velocity, thickness of the drag layer and the transport volume with the generating wave-current background have been presented. Practical engineering advices on performance of various reports concerning coastal engineering or coastal zone ecology. (author)

  5. Diamond turning and polishing tests on new RSP aluminium alloys

    NARCIS (Netherlands)

    Horst, R. ter; Haan, M. de; Gubbels, G.P.H.; Senden, R.; Venrooy, B.W.H. van; Hoogstrate, A.M.

    2012-01-01

    For years now conventional aluminium 6061 T6 has widely been used for mirrors in astronomical instruments, being diamond turned or since a few years also being optically polished. This allows the development of optical systems that can be tested and operated at any temperature, without being

  6. The Profile of a Polish Mutual Fund Manager

    Directory of Open Access Journals (Sweden)

    Dariusz Filip

    2018-05-01

    Full Text Available Aim/purpose - The purpose of this paper is to identify the characteristics that are typical of mutual fund managers. Design/methodology/approach - The study concentrates on a set of socio-demographic data, such as: age, gender, education, experience, and professional qualifications of 336 portfolio managers. The applied research strategy relies on an analysis concerning a set of statistical metrics describing the population under examination. Findings - The average Polish fund manager is a 37-year-old man, a holder of a stock-broker or investment adviser license. He obtained the authorization from the Polish Financial Supervision Authority (KNF a few years after graduating from the Warsaw School of Economics (SGH. He has 11 years' experience in financial markets and 7 years' experience in the mutual fund industry. Research implications/limitations - The identification of managerial characteristics for the purpose of creating a profile of a Polish mutual fund manager will provide an important basis for further surveys and analyses aimed to evaluate the effectiveness of mutual funds. Originality/value/contribution - There are no investigations within the discussed area in Polish studies. Therefore, the identification of the characteristics that are typical of mutual fund managers will make a contribution to the finance literature.(original abstract

  7. Polish scientists in fish immunology: a short history : review

    NARCIS (Netherlands)

    Muiswinkel, van W.B.; Pilarczyk, A.

    2015-01-01

    This review describes the role played by Polish scientists in the field of fish immunology and vaccination starting around 1900. In the early days, most publications were dealing with a description of relevant cells and organs in fish. Functional studies (phagocytosis, antibody response) came later

  8. Clear and compelling evidence: the Polish tribunal on abortion rights.

    Science.gov (United States)

    Girard, Françoise; Nowicka, Wanda

    2002-05-01

    On 25 July 2001 the Polish Federation for Women and Family Planning organised a Tribunal on Abortion Rights in Warsaw, to publicize the negative consequences of the criminalization of abortion in Poland. A panel of Polish and foreign experts heard the testimonials of seven Polish women's experiences under the 1993 "Anti-Abortion Act". Only two of the seven women were able to tell their stories in person. One died in 2001, at the age of 21, of an unsafe abortion. One is legally blind after having carried her last pregnancy to term. One is in prison for infanticide, which in all likelihood was committed by her boyfriend. National and foreign journalists were in attendance, as well as observers from all walks of life--writers, students, mothers, activists, feminists, husbands. The evidence was clear and compelling. Restrictive abortion laws make abortion unsafe by pushing it underground, endanger women's health, create a climate where even those services that are allowed by law-become unavailable, and contravene standards set by international human rights law. The restrictive abortion law in Poland has not increased the number of births; it has only caused women and their families suffering. The Tribunal brought the issue of abortion into the media prior to an election campaign and galvanised Polish and other Eastern European women's groups to become more active in defence of abortion rights.

  9. Heavy Metal Contamination of Popular Nail Polishes in Iran

    Directory of Open Access Journals (Sweden)

    Golnaz Karimi

    2015-06-01

    Full Text Available Background: Toxic and hazardous heavy metals like arsenic, lead, mercury, zinc, chromium and iron are found in a variety of personal care products, e.g. lipstick, whitening toothpaste, eyeliner and nail color. The nails absorb the pigments of nail polishes and vaporized or soluble metals can easily pass it. The goal of this survey was to assess whether the different colors of nail polishes comply with maximum concentrations of heavy metals in the EPA’s guidelines. Methods: 150 samples of different popular brands of nail polishes in 13 colors (yellow, beige, silver, pink, white, violet, brown, golden, green, black, colorless, red and blue were randomly purchased from beauty shops in Tehran City, Iran, in 2014. Microwave digestion EPA method 3051 was used by a microwave oven to determine the amount of 5 heavy metals; Nickel, Chromium, Lead, Arsenic and Cadmium. One-way ANOVA, Two-way ANOVA, hierarchical cluster, and principal component analyses were applied by Statistica 7.0 software. Results: The concentrations of chrome, lead, nickel and arsenic showed significant differences between the colors (p<0.05. In all studied samples, the level of cadmium was beyond the safe maximum permissible limit (MPS, but no significance difference in the cadmium content was identified. Conclusion: Due to the high concentrations of toxic metals in many brands of nail polishes, meticulous quality control is recommended for these beauty products.

  10. Polish adaptation of scoliosis research society-22 questionnaire.

    Science.gov (United States)

    Glowacki, Maciej; Misterska, Ewa; Laurentowska, Maria; Mankowski, Przemyslaw

    2009-05-01

    Polish adaptation of the original version of Scoliosis Research Society (SRS) instrument. The transcultural adaptation of SRS-22 and evaluation of its internal consistency. High psychometric value of the SRS-22 Questionnaire has made it an effective evaluation instrument in clinically assessing the functional status of patients with adolescent idiopathic scoliosis. First, 2 translators translated the original version into Polish. Afterwards, the translators identified differences between the translations and produced a consensus version. In the third stage, 2 native English speakers produced back translations. Finally, a team of 2 orthopedic surgeons, translators, a statistician and a psychologist reviewed all the translations to produce a prefinal version. The questionnaire was administered to 60 girls at the age of 16.6, SD 2.0 with adolescent idiopathic scoliosis treated with the Cotrel-Dubousset method in Pediatric Orthopaedics and Traumatology Clinic in Poznań. The internal consistency in the Polish version equaled 0.89 for the overall result and 0.81 for function, 0.81 for pain, 0.80 for mental health, 0.77 for self-image, and 0.69 for treatment satisfaction domains, respectively. The Polish version of SRS-22 is characterized by high internal consistency for all domains and for the overall score, which makes it an evaluation tool after surgical treatment compatible with the original SRS-22.

  11. Summary of Synthetic Lap Polishing Experiments at LLNL, FY95

    International Nuclear Information System (INIS)

    Nichols, M A

    2001-01-01

    The purpose of this research was to support the optics finishing development work for the NIF, the National Ignition Facility. One of the major expenses for the construction of NIF is the cost of finishing of the large aperture optics. One way to significantly reduce the cost of the project is to develop processes to reduce the amount of time necessary to polish the more than 3,000 amplifier slabs. These slabs are rectangular with an aspect ratio of more than twenty to one and are made of a very temperature sensitive glass, Nd doped phosphate laser glass. As a result of this effort, we could potentially reduce the time necessary to polish each surface of an amplifier from 20-30 hours of run time to under an hour to achieve the same removal and still maintain a flatness of between one to three waves concave figure. We also feel confident that we can polish rectangular thermally sensitive glass flat by use of temperature control of the polishing platen, pad curvature, slurry concentration with temperature control, pad rotation, and pressure; although further, larger scale experiments are necessary to gain sufficient confidence that such a procedure could be successfully fielded

  12. Scope of Nursing Care in Polish Intensive Care Units

    Directory of Open Access Journals (Sweden)

    Mariusz Wysokiński

    2013-01-01

    Full Text Available Introduction. The TISS-28 scale, which may be used for nursing staff scheduling in ICU, does not reflect the complete scope of nursing resulting from varied cultural and organizational conditions of individual systems of health care. Aim. The objective of the study was an attempt to provide an answer to the question what scope of nursing care provided by Polish nurses in ICU does the TISS-28 scale reflect? Material and Methods. The methods of working time measurement were used in the study. For the needs of the study, 252 hours of continuous observation (day-long observation and 3.697 time-schedule measurements were carried out. Results. The total nursing time was 4125.79 min. (68.76 hours, that is, 60.15% of the total working time of Polish nurses during the period analyzed. Based on the median test, the difference was observed on the level of χ2=16945.8, P<0.001 between the nurses’ workload resulting from performance of activities qualified into the TISS-28 scale and load resulting from performance of interventions within the scopes of care not considered in this scale in Polish ICUs. Conclusions. The original version of the TISS-28 scale does not fully reflect the workload among Polish nurses employed in ICUs.

  13. Great Britain and German-Polish Relations, 1929–1931

    Directory of Open Access Journals (Sweden)

    Zotova Ekaterina

    2014-12-01

    Full Text Available The article deals with the study of British-German relations during the period of exacerbation of territorial disputes between Germany and Poland in 1929-1931. Germany was making plans for revising the eastern borders. It sought to enlist the support of the new Labour government. Britain didn’t only approve of Germany's intention to carry out revision of the Treaty of Versailles (reparation issue, the evacuation of the Rhineland and the change in the German-Polish border, but also supported the strengthening of the political and economic situation in Germany as a whole. Assistance to Germany was advantageous for Britain. Firstly, the British support helped to improve the capacity of the purchasing power of the German market as one of the traditional markets of the English sale. Secondly, the strengthening of the position of the German cabinet meant failure of the French policy in Europe at this stage. The defeat of France in a dispute on the issue of early evacuation of the Rhineland would seriously devalue the foreign policy initiatives of Paris. Thirdly, the British government hoped that Germany will go into orbit of British political influence. The identity of the positions of the German and the British cabinets were considered as the components of British policy success not only in relations with France and Italy, but also with Czechoslovakia and Poland. Since the formation of the MacDonald’s cabinet, anti-Polish moods increased in the British course for the settlement of German-Polish relations. However, the threat of an attack on Poland by Germany was regarded by the government of Britain as unacceptable way of resolving the German-Polish conflict. Britain tried to follow the traditional foreign policy concept of “balance of power”, but the inefficiency of British policy “mediation” in European affairs was clearly shown in times of growing financial and economic crisis. The issue of the German-Polish border remained unsolved.

  14. Szanse i ograniczenia stosowania strategii CSR w polskich przedsiêbiorstwach/The Chances and the Limitation of Applying the CSR Strategy in Polish Enterprises

    OpenAIRE

    Iwona Codogni

    2012-01-01

    The topic of the article is the perspectives of CSR in Polish companies. The article contains the definition of corporate social responsibility, the state and dynamics of ethical reporting and the factors that can influence the dynamics of CSR in Poland – both in a favourable and adverse way.

  15. Analysis of Polish internet retail sites offering electronic cigarettes.

    Science.gov (United States)

    Zarobkiewicz, Michał Konrad; Woźniakowski, Mateusz Mariusz; Sławiński, Mirosław Aleksander; Samborski, Patryk Michał; Wawryk-Gawda, Ewelina; Jodłowska-Jędrych, Barbara

    Electronic cigarettes as possibly healthier alternative to conventional cigarettes are gaining popularity worldwide, although they are still hazardous to human health. Partly it is caused by unregulated advertising and online sales. Unfortunately it is more and more popular for youth to try electronic cigarettes. The aim of the study was to assess the marketing claims used by Polish websites offering electronic cigarettes. A search using Google search engine was performed in July 2015 for two keywords: e-papierosy [e-cigarettes] and elektroniczne papierosy [electronic cigarettes]. First 150 websites (15 pages) were listed. After initial review 86 pages met all inclusion criteria and were included in the study. Pages were searched for presence of 13 selected marketing claims as well as age-related warning and any social websites connections. Age-related warning was present on only 33.72% (n=29) websites. Two thirds has its own Facebook fan-page with average 1922.09 ± 3634.86 likes. Articles about health are available on 10.46% (n=9) websites, 53.49% (n=46) states that e-cigarettes are healthier than conventional ones, 39.53% (n=34) emphasized that during usage of e-cigarettes no tarry substances are produced. Two pages had special article in which conventional and electronic cigarettes were compared. Almost half (44.19%) remarked that e-cigarettes are cheaper in usage than conventional, one third pointed out the simplicity of usage. 32.56% advertised e-cigarettes as aid in quitting smoking. One fourth stated that e-cigarettes are harmless for surroundings. 33.72% marketed them as a way of bypassing public smoking act. 56.98% remarked the variety of liquid tastes offered. Electronic cigarettes and their rising popularity create another new possible threat for public health as the widely available information emphasize safety of e-cigarettes usage and as their availability and usage is not limited or restricted by law. electronic cigarettes, e-cigarettes, internet

  16. Symmetry or asymmetry? Cross-border openness of service providers in Polish-Czech and Polish-German border towns

    Directory of Open Access Journals (Sweden)

    Dołzbłasz Sylwia

    2015-03-01

    Full Text Available The symmetry and/or asymmetry in terms of cross-border openness of service providers is examined in this article, for the cases of two border twin towns: Cieszyn/Český Těšín at the Polish-Czech border, and Gubin/Guben at the Polish-German border. To assess the level of openness of firms towards clients from the other side of the border, four trans-border categories were examined: neighbour’s language visible at store location; business offers in the language of the neighbour; the possibilities of payment in the neighbour’s currency; and the staff’s knowledge of the language. This enabled a comparison of both parts of the particular twin towns in relation to the character of cross-border openness, as well as an assessment of their symmetry/asymmetry. Comparisons of Gubin/Guben and Cieszyn/Český Těšín with respect to the analysed features were also carried out. The analysis shows significant variation in the level of cross-border openness towards clients from neighbouring countries. Whereas in the Polish-Czech town a relative symmetry was observed, in the Polish-German case, significant asymmetry was noted.

  17. Pseudo-random tool paths for CNC sub-aperture polishing and other applications.

    Science.gov (United States)

    Dunn, Christina R; Walker, David D

    2008-11-10

    In this paper we first contrast classical and CNC polishing techniques in regard to the repetitiveness of the machine motions. We then present a pseudo-random tool path for use with CNC sub-aperture polishing techniques and report polishing results from equivalent random and raster tool-paths. The random tool-path used - the unicursal random tool-path - employs a random seed to generate a pattern which never crosses itself. Because of this property, this tool-path is directly compatible with dwell time maps for corrective polishing. The tool-path can be used to polish any continuous area of any boundary shape, including surfaces with interior perforations.

  18. Abstracts Book of 41. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry

    International Nuclear Information System (INIS)

    1998-01-01

    Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry is the most important scientific forum of Polish Chemists. The state of the art in many basic, fundamental and applied investigations has been presented and discussed. The following scientific sessions and microsymposia have been proposed: theoretical chemistry; molecular interactions; metal compounds - chemical, physical, electronic and biological aspects; catalysis and surface physico-chemistry; polymers - radiochemistry, modifications, physics and analytical methods; organic and bioorganic chemistry; physico-chemistry of condensed matter; chemical metallurgy; environmental protection; inorganic technology; chemistry and technology of coal; radiation chemistry; analytical chemistry; chemical engineering; young scientists forum; chemical didactics; petrochemistry; energetic materials; membranes and membrane processes; medical chemistry

  19. Polish society attitudes towards nuclear power, ionizing radiation applications and radioactive waste management (Report on public opinion polls)

    International Nuclear Information System (INIS)

    Latek, Stanislaw

    1999-01-01

    In Poland, during parliamentary debate on Foundations for the 'Polish energy policies up to 2010', the importance of public attitudes toward nuclear power has been recalled repeatedly in the context of the future development of nuclear power in Poland. In the governmental document, accepted by Polish Parliament on 1 January 1996, it has been stated that nuclear power plant construction is not foreseen up to the year 2010; nevertheless it has been assumed that the appraisals of the economic feasibility and of the public acceptance level for such investments will be conducted. Thus, the need for such assessments of public opinions and attitudes toward nuclear power has been recognized and accepted by the highest legislative power organ in Poland

  20. The diagnosis and management of food allergies. Position paper of the Food Allergy Section the Polish Society of Allergology

    Directory of Open Access Journals (Sweden)

    Zbigniew Bartuzi

    2017-10-01

    Full Text Available The paper concerns the current position of the Polish Society of Allergology Food Allergy Section on the diagnosis and management of food allergies. The aim of this position is to provide evidence-based recommendations on the diagnosis and management of patients with allergic hypersensitivity to foods. This position statement includes a systematic review of studies in three areas, namely, the epidemiology, diagnosis and management of food allergies. While taking into account the specific Polish setting, in this publication we also used the current European Academy of Allergy and Clinical Immunology (EAACI position paper and other current position statements, including those of the United States National Institute of Allergy and Infectious Diseases (NIAID.

  1. Cognitive insight: A systematic review.

    Science.gov (United States)

    Van Camp, L S C; Sabbe, B G C; Oldenburg, J F E

    2017-07-01

    Cognitive insight is the ability to re-evaluate thoughts and beliefs in order to make thoughtful conclusions. It differs from clinical insight, as it focuses on more general metacognitive processes. Therefore, it could be relevant to diverse disorders and non-clinical subjects. There is a growing body of research on cognitive insight in individuals with and without psychosis. This review has summarised the current state of the art regarding this topic. We conclude that while cognitive insight in its current form seems valid for use in individuals with psychosis, it is less so for individuals without psychosis. Additionally, higher cognitive insight not always leads to better psychological functioning. For instance, higher levels of self-reflection are often associated with depressive mood. We therefore recommend the sub-components of cognitive insight to be studied separately. Also, it is unclear what position cognitive insight takes within the spectrum of metacognitive processes and how it relates to other self-related concepts that have been defined previously in literature. Combining future and past research on cognitive insight and its analogue concepts will help in the formation of a uniform definition that fits all subjects discussed here. Copyright © 2017. Published by Elsevier Ltd.

  2. Polish Martial Law: The Crisis of Communism

    Science.gov (United States)

    2009-12-01

    of securitization was not created to explain the actions of an authoritative state; however, it is a useful tool that helps to clear away some of the...with numerous choices of nurseries and kindergartens. 18. A 3-year paid maternity leave is introduced for bringing up children. 19. Waiting time

  3. Strain-free polished channel-cut crystal monochromators: a new approach and results

    Science.gov (United States)

    Kasman, Elina; Montgomery, Jonathan; Huang, XianRong; Lerch, Jason; Assoufid, Lahsen

    2017-08-01

    The use of channel-cut crystal monochromators has been traditionally limited to applications that can tolerate the rough surface quality from wet etching without polishing. We have previously presented and discussed the motivation for producing channel cut crystals with strain-free polished surfaces [1]. Afterwards, we have undertaken an effort to design and implement an automated machine for polishing channel-cut crystals. The initial effort led to inefficient results. Since then, we conceptualized, designed, and implemented a new version of the channel-cut polishing machine, now called C-CHiRP (Channel-Cut High Resolution Polisher), also known as CCPM V2.0. The new machine design no longer utilizes Figure-8 motion that mimics manual polishing. Instead, the polishing is achieved by a combination of rotary and linear functions of two coordinated motion systems. Here we present the new design of C-CHiRP, its capabilities and features. Multiple channel-cut crystals polished using the C-CHiRP have been deployed into several beamlines at the Advanced Photon Source (APS). We present the measurements of surface finish, flatness, as well as topography results obtained at 1-BM of APS, as compared with results typically achieved when polishing flat-surface monochromator crystals using conventional polishing processes. Limitations of the current machine design, capabilities and considerations for strain-free polishing of highly complex crystals are also discussed, together with an outlook for future developments and improvements.

  4. Influence of polishing on surface roughness following toothbrushing wear of composite resins.

    Science.gov (United States)

    Dalla-Vecchia, Karine Battestin; Taborda, Talita Damas; Stona, Deborah; Pressi, Heloísa; Burnett Júnior, Luiz Henrique; Rodrigues-Junior, Sinval Adalberto

    2017-01-01

    This study aimed to evaluate the influence of different polishing systems on the surface roughness of composite resins following procedures to simulate the effects of toothbrushing over time. Four currently available commercial composites were used to make 128 cylindrical specimens. The specimens were randomly allocated to polishing with a 1-step polisher or 1 of 3 multistep polishers (n = 8 per group). The baseline surface roughness was measured, and the specimens were submitted to 5000, 10,000, and 20,000 brushing cycles to represent toothbrushing throughout 6, 12, and 24 months, respectively. Results showed that surface roughness was influenced by the type of composite and polishing system and was not influenced by the simulated toothbrushing time. However, the surface roughness, as challenged by toothbrushing wear, was affected by the interaction among the composite, the polisher, and the toothbrushing time. The 1-step polisher produced the highest surface roughness and influenced toothbrushing wear resistance of some composites.

  5. Transboundary Air-Pollution Transport in the Czech-Polish Border Region between the Cities of Ostrava and Katowice.

    Science.gov (United States)

    Černikovský, Libor; Krejčí, Blanka; Blažek, Zdeněk; Volná, Vladimíra

    2016-12-01

    The Czech Hydrometeorological Institute (CHMI) estimated the transboundary transport of air pollution between the Czech Republic and Poland by assessing relationships between weather conditions and air pollution in the area as part of the "Air Quality Information System in the Polish-Czech border of the Silesian and Moravian-Silesian region" project (http://www.air-silesia.eu). Estimation of cross-border transport of pollutants is important for Czech-Polish negotiations and targeted measures for improving air quality. Direct measurement of PM 10 and sulphur dioxide (SO 2 ) concentrations and the direction and wind speed from measuring stations in the vicinity of the Czech-Polish state border in 2006-2012. Taking into account all the inaccuracies, simplifications and uncertainties, by which all of the measurements are affected, it is possible to state that the PM 10 transboundary transport was greater from the direction of Poland to the Czech Republic, rather than the other way around. Nevertheless, the highest share of the overall PM 10 concentration load was recorded on days with a vaguely estimated airflow direction. This usually included days with changing wind direction or days with a distinct wind change throughout the given day. A changeable wind is most common during low wind speeds. It can be assumed that during such days with an ambiguous daily airflow, the polluted air saturated with sources on both sides of the border moves from one country to the other. Therefore, we could roughly ascribe an equal level of these concentrations to both the Czech and Polish side. PM 10 transboundary transport was higher from Poland to the Czech Republic than from the opposite direction, despite the predominant air flow from the Czech Republic to Poland. Copyright© by the National Institute of Public Health, Prague 2016

  6. Conventional methods and emerging wastewater polishing technologies for palm oil mill effluent treatment: a review.

    Science.gov (United States)

    Liew, Wai Loan; Kassim, Mohd Azraai; Muda, Khalida; Loh, Soh Kheang; Affam, Augustine Chioma

    2015-02-01

    The Malaysian palm oil industry is a major revenue earner and the country is ranked as one of the largest producers in the world. However, growth of the industry is synonymous with a massive production of agro-industrial wastewater. As an environmental protection and public health concern, the highly polluting palm oil mill effluent (POME) has become a major attention-grabber. Hence, the industry is targeting for POME pollution abatement in order to promote a greener image of palm oil and to achieve sustainability. At present, most palm oil mills have adopted the ponding system for treatment. Due to the successful POME pollution abatement experiences, Malaysia is currently planning to revise the effluent quality standards towards a more stringent discharge limits. Hence, the current trend of POME research focuses on developing tertiary treatment or polishing systems for better effluent management. Biotechnologically-advanced POME tertiary (polishing) technologies as well as other physicochemical methods are gaining much attention as these processes are the key players to push the industry towards the goal of environmental sustainability. There are still ongoing treatment technologies being researched and the outcomes maybe available in a while. However, the research completed so far are compiled herein and reported for the first time to acquire a better perspective and insight on the subject with a view of meeting the new standards. To this end, the most feasible technology could be the combination of advanced biological processes (bioreactor systems) with extended aeration, followed by solids separation prior to discharge. Chemical dosing is favoured only if effluent of higher quality is anticipated. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. Dietary fiber sources consumption and overweight among Polish male students. A cross-sectional study

    Science.gov (United States)

    Krusińska, Beata; Wuenstel, Justyna Weronika; Kowalkowska, Joanna; Wądołowska, Lidia; Słowińska, Małgorzata Anna

    There has been an increase in the prevalence of overweight and obesity in adolescents and young adults, especially in men than women. Many adolescents have a sedentary lifestyle and consume more processed, low-fiber foods. The aim of this study was to assess the frequency of fiber intake and its selected dietary source consumption in relation to the overweight among Polish male students. This cross-sectional study involved 1,233 male students aged 13.0-24.9 years from northern, eastern and central Poland. The respondents completed a self-administered Block Screening Questionnaire for Fruit/Vegetable/Fiber Intake and measurements of their body mass and height were performed. The overweight and obesity prevalence was assessed using international standards. The most frequently consumed foods by students included: white bread and potatoes, fruit and fruit or vegetable juices. The odds of overweight (including obesity) were lower from 28% (OR=0.72; 95%CI:0.56-0.93) to 31% (OR=0.69; 95%CI:0.50-0.95) with a daily consumption of white bread compared to non-daily consumption of white bread. Consumption ≥4 times/week of prepared vegetables (cooked, preserved or marinated) was associated with 51% lower odds of overweight (OR=0.49; 95%CI:0.27-0.97) compared to consumption less than 4 times/week of these foods. The odds of overweight for the level of fiber intake was insignificant. This study provides surprising insights regarding high-fiber and low-fiber food consumption and overweight in Polish male students. A lower odds of overweight was associated with a higher frequency consumption of relatively low in fiber foods as white bread and cooked, preserved or marinated vegetables. Most of the students consumed fiber at an unacceptable level, so a beneficial impact of high-fiber foods on overweight prevalence was not shown.

  8. Polish media and public opinion on NPP Mochovce commissioning

    International Nuclear Information System (INIS)

    Latek, Stanislaw

    1999-01-01

    The so called 'Mochovce Problem' was one of the major topics in Polish media in the period from May to July 1998. The nuclear power plant commissioning caused an unexpectedly strong reaction, especially in the newspapers, slightly less so in electronic media. Faced with clearly hostile media reaction to Mochovce NPP, the National Atomic Energy Agency representatives, together with atomic and nuclear experts, undertook to change these attitudes. In numerous interviews, letters to the editors and talks with journalists, they attempted to correct the mistakes, explain the true safety situation in the nuclear power plant, by whom it was constructed, who supervised and tested the systems and so on. The completion of Mochovce NPP construction improved significantly the electricity balance in Slovakia, thus decreasing the pressure for continuing the operation of older Bohunice V1 units beyond their design lifetime. For this reason, as well as in view of striving for improvement in environmental factors beyond Polish southern border, especially after Kyoto/97 decisions on greenhouse gases emissions, the public opinion in Poland should support the Mochovce NPP construction. In 1996 Poland has signed with Slovakia a bilateral inter-governmental agreement on the prompt notification on nuclear accidents and on the cooperation in the nuclear safety and radiological protection matters. On the basis of this agreement the experts from Polish National Atomic Energy Agency are in perpetual contact with Slovakian Nuclear Regulatory Body and in each and every moment can obtain full and comprehensive information on the plant parameters iportant for nuclear safety. The experts explanations, together with the NAEA top management visit to the plant itself, brought some results. The media became less aggressive, and Polish public and authorities - contrary to the Austrians - do not protest loudly against the commissioning of this newest European NPP. Now, in December 1998, the tune of

  9. Religiousness, religious coping with illness, and psychological function among Polish elderly patients with osteoarthritis undergoing arthroplasty.

    Science.gov (United States)

    Stecz, Patryk; Kocur, Józef

    2015-04-01

    To determine the influence of religious coping and religiousness on the psychological functioning of Polish patients before and after arthroplasty, a prospective study was performed. Out of a pool of 102 potential participants, a total of 61 (34 females, 27 males) completed a purposely created survey, Brief-COPE followed by preoperative and postoperative Perceived Stress Scale, State Trait Anxiety Inventory and Satisfaction with Life Scale. Religious coping was not associated with: (1) perceived stress before or after surgery; (2) preoperative or postoperative anxiety; (3) life satisfaction. A two-factor ANOVA has shown that religious coping controlled by religiousness was related to better psychological functioning. Between- and within-subjects effects were observed for improvement in life satisfaction measured by split-plot ANOVA, which suggests (p religious orientation. We concluded that religious strategies in dealing with stress measured by Brief-COPE were least likely to benefit patients of low-religious orientation. The study demonstrated the importance of core religious beliefs in predicting benefits derived from religiousness in the face of a crisis. This study showed that regardless of its effectiveness, turning to religion is common among Polish patients about to undergo surgery for osteoarthritis of the hip.

  10. An investigation and analysis of safety issues in Polish small construction plants.

    Science.gov (United States)

    Dąbrowski, Andrzej

    2015-01-01

    The construction industry is a booming sector of the Polish economy; however, it is stigmatised by a lower classification due to high occupational risks and an unsatisfactory state of occupational safety. Safety on construction sites is compromised by small construction firms which dominate the market and have high accident rates. This article presents the results of studies (using a checklist) conducted in small Polish construction companies in terms of selected aspects of safety, such as co-operation with the general contractor, occupational health and safety documents, occupational risk assessment, organization of work, protective gear and general work equipment. The mentioned studies and analyses provided the grounds to establish the main directions of preventive measures decreasing occupational risk in small construction companies, e.g., an increase in engagement of investors and general contractors, improvement of occupational health and safety (OSH) documents, an increase in efficiency of construction site managers, better stability of employment and removal of opposing objectives between economic strategy and work safety.

  11. THE INFLATION IMPACT OF SELECTED EUROPEAN UNION MEMBERS ON POLISH INFLATION

    Directory of Open Access Journals (Sweden)

    Jarosław Czaja

    2012-06-01

    Full Text Available The article aims at determining the inflation influence between Poland and selected EU member states. Although for some time the general inflation level in those countries was definitely controllable, the problem seems to be returning. That is why in this article, using the model of Vector AutoRegression (VAR and Granger causality test, we are attempting to determine inflation influences on Poland. The study confirmed the impact of the selected countries on Polish inflation, expressed the general HICP index. However, in the case of Germany, the method has not proved the existence of such interactions. For this reason, it is made an attempt to clarify the reasons for non-compliance findings with data showing Germany as a Polish main trading partner for more than two decades. The authors try to show that lack of influence can be seen in the excessive generality of the main HICP index and predict that the chosen method confirm the effect of foreign trade indices in the HICP.

  12. [Perceived Autonomy in Old Age scale: Factor structure and psychometric properties of the Polish adaptation].

    Science.gov (United States)

    Kroemeke, Aleksandra

    2015-01-01

    Sense of autonomy - the possibility to choose and decide - is one of the markers of positive and active aging. The goal of this study was to examine the Polish adaptation of the Perceived Autonomy in Old Age (PAA) scale and to determine its internal structure and psychometric properties: reliability, as well as construct and discriminant validity. 277 seniors (female=187; male=90), without cognitive function disorders aged 60 to 100 (M=77.4; SD=9.2) took part in the study. Apart from the PAA, the ADL and IADL scales (self-reliance assessment) were used, as well as the Emotional State Questionnaire (a measure for positive and negative emotions) and the WHOQoL-Brief (a measure for health-related quality of life). As a result of an exploratory and confirmation factor analysis a one-factor tool with five items was built. Reliability coefficients of the scale measured with the internal consistency method and test-retest were ≥ 0.80. Positive correlations were found with indicators in the ADL, IADL, as well as in the somatic and psychological domain of life quality, and positive emotions. Negative correlations were found for negative emotions. The obtained results indicated very high reliability and accuracy for the Polish adaptation of the SPA. The tool can be used as a predictor and/or indicator of successful aging and life quality of seniors.

  13. The socio-economic and spatial transformation of Polish cities after 1989

    Directory of Open Access Journals (Sweden)

    Jerzy J. Parysek

    2004-01-01

    Full Text Available The aim of this paper is to present the socio-economic and spatial transformation of Polishcities after 1989. The Polish changes reached the structures of the three basic subsystems ofthe state: political (power, social (society, and economic (the economy. The systemictransformation that has taken place in Poland after 1989 is most readily visible in towns,although it was introduced in the country as a whole. For the development and transformationof towns, the most important were the introduction of local government structures andthe market model of the economy. The restitution of local government has ensured townsan authentic manager authorised to perform his function by the local community. The introductionof the market model to the economy has resulted in its privatisation and the appearanceof enterprise and competition. Towns, especially the biggest cities, have becomeattractive locations for investment. Cities with a balanced economic structure and well-developedinfrastructure had much better chances for growth to start with. Unfortunately, thetransformation period has also had some detrimental effects, the most important being unemploymentand all kinds of social deviance. However, Polish cities are certainly differenttoday and resemble Western cities to a greater extent than did the so-called socialist townsbuilt along theoretically beautiful but practically ineffectual ideological lines.

  14. Constitutive law for the densification of fused silica with applications in polishing and microgrinding

    Science.gov (United States)

    Lambropoulos, John C.; Fang, Tong; Xu, Su; Gracewski, Sheryl M.

    1995-09-01

    We discuss a constitutive model describing the permanent densification of fused silica under large applied pressures and shear stresses. The constitutive law is assumed to be rate- independent, and uses a yield function coupling hydrostatic pressure and shear stress, a flow rule describing the evolution of permanent strains after initial densification, and a hardening rule describing the dependence of the incremental densification on the levels of applied stresses. The constitutive law accounts for multiaxial states of stress, since during polishing and grinding operations complex stress states occur in a thin surface layer due to the action of abrasive particles. Due to frictional and other abrasive forces, large shear stresses are present near the surface during manufacturing. We apply the constitutive law in estimating the extent of the densified layer during the mechanical interaction of an abrasive grain and a flat surface.

  15. Natural immunity factors in Polish mixed breed rabbits.

    Science.gov (United States)

    Tokarz-Deptuła, B; Niedźwiedzka-Rystwej, P; Adamiak, M; Hukowska-Szematowicz, B; Trzeciak-Ryczek, A; Deptuła, W

    2015-01-01

    Mixed-breed rabbits in Poland are widely used for diagnostic and scientific research and as utility animals, therefore there is a need to know their immunological status, as well as their haematological status. In this study natural immunity factors were analyzed in Polish mixed-breed rabbits and Polish mixed-breed rabbits with addition of blood of meet-breed, considering the impact of sex and season of the year (spring, summer, autumn, winter) using measurement of non-specific cellular and humoral immunity parameters in peripheral blood. The study has revealed that there is a variety between the two commonly used mixed-breed types of rabbits, especially when sex and season is concerned, which is crucial for using these animals in experiments.

  16. Impact of polishing on the light scattering at aerogel surface

    International Nuclear Information System (INIS)

    Barnyakov, A.Yu.; Barnyakov, M.Yu.; Bobrovnikov, V.S.; Buzykaev, A.R.; Danilyuk, A.F.; Katcin, A.A.; Kononov, S.A.; Kirilenko, P.S.; Kravchenko, E.A.; Kuyanov, I.A.; Onuchin, A.P.; Ovtin, I.V.; Predein, A.Yu.; Protsenko, R.S.

    2016-01-01

    Particle identification power of modern aerogel RICH detectors strongly depends on optical quality of radiators. It was shown that wavelength dependence of aerogel tile transparency after polishing cannot be described by the standard Hunt formula. The Hunt formula has been modified to describe scattering in a thin layer of silica dust on the surface of aerogel tile. Several procedures of polishing of aerogel tile have been tested. The best result has been achieved while using natural silk tissue. The resulting block has optical smooth surfaces. The measured decrease of aerogel transparency due to surface scattering is about few percent. This result could be used for production of radiators for the Focusing Aerogel RICH detectors.

  17. Problems in laser repair welding of polished surfaces

    Directory of Open Access Journals (Sweden)

    A. Skumavc

    2014-10-01

    Full Text Available This paper presents problems in laser repair welding of the tools for injection moulding of plastics and light metals. Tools for injection moulding of the car headlamps are highly polished in order to get a desirable quality of the injected part. Different light metals, glasses, elastomers, thermoplastics and thermosetting polymers are injected into the die cavity under high pressures resulting in the surface damages of the tool. Laser welding is the only suitable repair welding technique due to the very limited sputtering during deposition of the filler metal. Overlapping of the welds results in inhomogeneous hardness of the remanufactured surface. Results have shown strong correlation between hardness and surface waviness after final polishing of the repair welded surface.

  18. E-TOURISM SERVICES IN POLISH TOURISTS' OPINIONS

    Directory of Open Access Journals (Sweden)

    Joanna Papińska-Kacperek

    2013-07-01

    Full Text Available E-tourism is most often related only with web pages of travel agencies or aggregators offering many services, where it is possible to make transactions electronically. Whereas many applications and devices are applied in tourism, like the audio guides and mobile guides (sometimes with augmented reality functions, electronic cards in museums, 2D codes systems, web pages for individual tourists, geographic information systems (e.g. Google Street View, social network sites recommendation, and profiles of cities on social networks sites like Facebook. Polish tourists' opinions about mentioned innovative tools will be presented as the report from the survey conducted among students and graduates from three Polish universities. The objectives of the study are: investigating the popularity of e-tourist services in Poland and verifying whether municipal authorities promote e-tourism initiatives.

  19. Legal aspects of Polish Tax and Social Security in Agriculture

    Directory of Open Access Journals (Sweden)

    Agnieszka Parlińska

    2008-12-01

    Full Text Available In the paper are describing legal aspects of treatment of farming sector in the tax and social security system in Poland. Tax System in Polish Agriculture is an integral part of Polish Tax System. Most taxes paid by farmers are property taxes, which supplied the budget of main local authority in Poland (municipality. In some cases farmers pay also personal income tax and value added tax like those, who run specific agricultural production as well individual farmers who operate through a limited liability company are subject to corporate income tax. The social security fund for farmers (known as KRUS was speared in 1990 from the social security system (ZUS. Farmers receive similar benefits with regard to health care, education, and social welfare although the contributions into the farmers system are lower then under the ZUS system.

  20. Edge effect modeling of small tool polishing in planetary movement

    Science.gov (United States)

    Li, Qi-xin; Ma, Zhen; Jiang, Bo; Yao, Yong-sheng

    2018-03-01

    As one of the most challenging problems in Computer Controlled Optical Surfacing (CCOS), the edge effect greatly affects the polishing accuracy and efficiency. CCOS rely on stable tool influence function (TIF), however, at the edge of the mirror surface,with the grinding head out of the mirror ,the contact area and pressure distribution changes, which resulting in a non-linear change of TIF, and leads to tilting or sagging at the edge of the mirror. In order reduce the adverse effects and improve the polishing accuracy and efficiency. In this paper, we used the finite element simulation to analyze the pressure distribution at the mirror edge and combined with the improved traditional method to establish a new model. The new method fully considered the non-uniformity of pressure distribution. After modeling the TIFs in different locations, the description and prediction of the edge effects are realized, which has a positive significance on the control and suppression of edge effects

  1. Africa and Its People in the Polish Media

    Directory of Open Access Journals (Sweden)

    Średziński Paweł

    2017-06-01

    Full Text Available The African continent is treated by the Polish media marginally and usually seen through the lens of four domains of stereotypical perceptions that are associated with difficult life conditions, threats and dangers, beautiful and wild nature, as well as original and diverse cultures. Monitoring of the Polish media has become very important in this situation. That is why the results of first media monitoring report were published in 2011 by ‘Africa Another Way’ Foundation. Five years later the monitoring was repeated. It is hard to resist the impression that Africa is still viewed as this poor, underdeveloped and dangerous continent. And the way it is presented translates into the way individuals of African descent are perceived.

  2. Restaurants and hotels expenditure in Polish households of the elderly

    Directory of Open Access Journals (Sweden)

    Piekut Marlena

    2016-03-01

    Full Text Available The age of household members is an important factor for expenditures. The aim of the study is to investigate the level of expenditure on restaurants and hotels incurred in Polish households of the elderly in 2004-2013 and to identify the factors affecting such expenditures. The source of information used in the study was the household budget survey of the Central Statistical Office of Poland. The main methods used in this study were variance analysis and regression analysis. Restaurants and hotels expenditure increases every year together with their share in total household expenditure. The most important factors affecting the restaurants and hotels spending in Polish households of the elderly are: income per capita and the level of education of the head of the family. The study on consumption determinants at different groups leads to better understanding of consumer behavior circumstances and thereby ensuring a good quality of life for the people of the elderly.

  3. Nuclear third party liability under Polish law

    International Nuclear Information System (INIS)

    Lewaszkiewic-Petrykowska, B.

    1988-01-01

    This paper describes the system governing liability for nuclear incidents in Poland. The Atomic Energy Act of 10 April 1986, which entered into force on 1 July 1986, covers all aspects of nuclear activities, including third party liability. Such liability is channelled onto the nuclear operator who must take out insurance to cover his liability up to an amount fixed in the contract. The Act provides that questions not settled by its provisions are governed by the Civil Code; therefore, if personal injuries exceed that amount victims may claim the difference from the State under that Code (NEA) [fr

  4. Industrial environmental practices in Polish Firms

    DEFF Research Database (Denmark)

    Kræmer, Trine Pipi

    , and environment. The five case firms all had a Communist past. The firms represent three different industrial sectors; i.e. textile, energy, and publishing and printing industries. Furthermore, the firms are both private and state owned as well as in the process of privatisation.......The study investigates how discursive developments in Poland interact with industrial environmental practices in five production firms. The analysis of the discursive development covers the period from the end of World War I to the turn of the century. The areas in focus are identity, industry...

  5. Macroeconomic Reasons of Debts in Polish Health Service

    Directory of Open Access Journals (Sweden)

    Kamila Szymańska

    2008-04-01

    Full Text Available The article deals with the problem of debts in polish health service. Author analyzes the macroeconomic reasons of this situation. As a main reasons are indicated: a specificity of the health service market, which leads to a inefficient allocation of health services, lack of reliable data on health care system, too low level of public expenditure on a health care, inappropriate allocation of public capital and a monopolistic position of the payer.

  6. Ion beam polishing for three-dimensional electron backscattered diffraction

    DEFF Research Database (Denmark)

    Saowadee, Nath; Agersted, Karsten; Ubhi, H.S.

    2013-01-01

    averaging and/or poor 3D-EBSD data quality. In this work a low kV focused ion beam was successfully implemented to automatically polish surfaces during 3D-EBSD of La- and Nb-doped strontium titanate of volume 12.6 × 12.6 × 3.0 μm. The key to achieving this technique is the combination of a defocused low k...

  7. Polish epistolography in Ukrainian polemic of the 17th century

    Directory of Open Access Journals (Sweden)

    Sukhareva Svitlana Volodymyrivna

    2013-06-01

    Full Text Available The block of Polish epistolary in the system of polemical prose of the 17th century is analyzed in the article. It's indicated in its genre features, holistic character, publicistic and artistic level. Special attention is paid to the epistolary style of Hypatij Potij, Andrew Muzhylovski and Klyryk from Ostrog. Innovative and classical elements of epistolary heritage of the Baroque epoch are identified.

  8. Sports metaphors in Polish written commentaries on politics

    OpenAIRE

    Jarosław Wiliński

    2015-01-01

    This paper seeks to investigate what sports metaphors are used in Polish written commentaries on politics and what special purpose they serve. In particular, the paper examines structural metaphors that come from the lexicon of popular sports, such as boxing, racing, track and field athletics, sailing, etc. The language data, derived from English Internet websites, has been grouped and discussed according to source domains. Applying George Lakoff and Mark Johnson’s approach to metaphor, the p...

  9. Mutual Fund Performances of Polish Domestic Equity Fund Managers

    OpenAIRE

    Tan, Ömer Faruk; Ünal, Gözde

    2015-01-01

    Purpose of the article: The main purpose of the paper is empirically evaluating selectivity skills and market timing ability of Polish fund managers during the period from January 2009 to November 2014. After the global financial crisis of 2008, in this period of quantitative easing (QE), thanks to an increase in the money supply, a capital flow from developed countries to developing countries was observed. In this study, we try to analyse that although the financial market in Pol...

  10. Consolidation Processes: Raiders & Targets in Polish Financial Institutions

    OpenAIRE

    Poteraj, Jarosław

    2004-01-01

    The work consists of five chapters, an annex and an appendix. In the first chapter the author describes the point of consolidation processes, presents: the meaning of consolidation processes, active and institutional aspects of merger execution, gives a classification of the consolidation processes and considers conditions of execution of consolidations processes in the Polish law, The next chapter concerns reasons of consolidation processes. The author describes there in turn: motives of the...

  11. Mutual Fund Performances of Polish Domestic Equity Fund Managers

    Directory of Open Access Journals (Sweden)

    ömer faruk tan

    2015-10-01

    Full Text Available Purpose of the article: The main purpose of the paper is empirically evaluating selectivity skills and market timing ability of Polish fund managers during the period from January 2009 to November 2014. After the global financial crisis of 2008, in this period of quantitative easing (QE, thanks to an increase in the money supply, a capital flow from developed countries to developing countries was observed. In this study, we try to analyse that although the financial market in Poland made an incredible progress, whether fund managers show better or worse performance than the market. Methodology/Methods: In order to evaluate fund manager performances, Jensen alpha (1968 is computed, which depicts selectivity skills of fund managers. For determining market timing ability of fund managers, Treynor & Mazuy (1966 regression analysis and Henriksson & Merton (1981 regression analysis are applied. Fund performances are evaluated using Warsaw Stock Exchange Index as the benchmark index. Scientific aim: In this study, we have tried to evaluate selectivity skills and market timing ability of Polish fund managers. A total of 14 equity fund managers’ performances are analysed. The study can be guiding especially for investors who are interested in Polish equity fund performances in a period where emerging stock markets outperformed with quantitative easing. Findings: Jensen (1968 alphas indicate that over this period fund managers did not have selective ability, as none of the 14 funds had statistically significant positive alphas. Furthermore, Treynor & Mazuy (1966 and Henriksson & Merton (1981 regression analysis indicate that over the same period fund managers did not also have market timing ability, as again none of the 14 funds had statistically significant positive coefficients. Conclusions: In this work, we can detect that in the era of quantitative easing, although the financial market in Poland made an incredible progress, the fund returns were

  12. Fracking in the Polish press: Geopolitics and national identity

    International Nuclear Information System (INIS)

    Jaspal, Rusi; Nerlich, Brigitte; Lemańcyzk, Szczepan

    2014-01-01

    In a context of resource scarcity and political instability, new energy sources and technologies are being explored in many parts of the world and exploited in some. One of these new energy sources is shale gas and one of the countries seeking to decrease its energy dependence and increase its energy security is Poland which is largely dependent on gas and oil imports from Russia. This article presents the results of a thematic content analysis of articles reporting on shale gas/fracking published in Gazeta Wyborcza and Rzeczpospolita, two leading Polish newspapers, from 1 January 2010 to 31 December 2012. Findings suggest that in media reporting the geopolitical dimension of fracking overrides the technological/scientific dimension and that representations are overwhelmingly positive. Positive representations are bolstered through particular linguistic framings. It is argued that the Polish press has polarized the debate on fracking in a particular (positive) direction, which has silenced an open and constructive debate concerning energy policy in Poland and constructed criticism of fracking as counter-normative and “un-Polish.” The potential socio-political and policy implications of these media representations are discussed. - Highlights: • The general tone of Polish media reporting is positive and emphatic about the benefits of fracking. • The geopolitical dimension of fracking overrides the technological/scientific dimension. • The implementation of fracking is constructed as a national priority. • Opposition to fracking is constructed as counter-normative and “anti-Polish”. • Representations impede open and constructive dialogue about energy policy

  13. Cogeneration – development and prospect in Polish energy sector

    Directory of Open Access Journals (Sweden)

    Matuszewska Dominika

    2017-01-01

    Full Text Available Next 10-15 years are crucial for condition of Polish energy sector in light of challenges arising mainly from increasing demand for electric energy, need of reducing greenhouse gases emissions and shutdowns of old units. In this situation cogeneration can be one of the most rational way to meet those circumstances. This paper analyzes present development of cogeneration in Poland and its prospect for future.

  14. Between Positivism, Narrativism and Idealisation in Polish Methodology of History

    OpenAIRE

    Brzechczyn, Krzysztof

    2014-01-01

    This paper has two main purposes. Its primary purpose is to present the reception of the discussion between positivism and narrativism in Polish methodology of history. A secondary one is to paraphrase, using the notion apparatus of the idealisational theory of science, the issue of the accuracy of explanation. The paper consists of six parts. In the first, Hempel’s deductive-nomological (or covering law) model of explanation is presented. In the second part, the main tenets and assumptions o...

  15. Efficiency as a parameter for assessing the Polish healthcare system

    Directory of Open Access Journals (Sweden)

    Magdalena Bogdan

    2018-04-01

    Full Text Available Introduction. Efficacy is defined as one of the most valid parameters of health system evaluation. It should be said that there is no consistent definition of the concept of effectiveness in health care, which would allow for the evaluation and comparison of health systems in the world. One can not point to the best or even near ideal of the health system. However, you can rank individual health systems with respect to the evaluation of individual parameters or groups of parameters. One of the possibilities is to evaluate the effectiveness of the system. Aim of the study. The aim of the article is to define and analyze particular types of system effectiveness in the context of the Polish health system. Description of knowledge. The literature on the subject is divided into operational and dynamic efficiency. Dynamic efficiency is divided into adaptive and innovative. The Polish health system is characterized by high operational efficiency. Operational efficiency determines the intensity of the system. The key factor for improving the health of the Polish society, as a factor of socio-economic development of the country is to improve the dynamic efficiency of the system. Conclusions. Health care in Poland has high operational efficiency while low dynamic efficiency, both adaptive and innovative, which clearly demonstrates the existence of a paradox of the overall effectiveness of the health care system in Poland.

  16. Cleaning, abrasion, and polishing effect of novel perlite toothpaste abrasive.

    Science.gov (United States)

    Wang, Bo

    2013-01-01

    This study was intended to optimize perlite particle size and morphology for better tooth cleaning and lower tooth abrasion, and to evaluate the performance of a whitening toothpaste containing the optimized perlite abrasive for tooth cleaning, abrasion, and polishing. Perlite toothpaste abrasive samples were prepared by air classifying a commercial expanded perlite product. The tooth cleaning and abrasion properties for these classified perlite samples were reported via the pellicle cleaning ratio (PCR) and relative dentin abrasion (RDA). Performance of the whitening toothpaste containing the optimized perlite abrasive in tooth cleaning, polishing, and abrasion was evaluated against a widely used synthetic high-cleaning silica. Air classification removes large perlite particles and also physically changes perlite particle morphology from mostly three dimensional and angular particles to mainly two dimensional and platy particles. All the classified samples show good tooth cleaning effect, but tooth abrasion decreases significantly with decreasing particle size. Compared to high-cleaning silica whitening toothpaste, the whitening toothpaste containing the optimized perlite abrasive (PerlClean) is slightly better at tooth cleaning, lower in tooth abrasion, and significantly better at tooth polishing. Fine platy perlite particles are effective in tooth cleaning with low tooth abrasion. The enhanced performance of optimized perlite toothpaste abrasive compared to high-cleaning silica in a whitening toothpaste is attributed to the optimized particle size distribution and the unique platy particle geometry.

  17. The Persistence of Abnormal Returns: Analysis of Polish Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Marcin Puziak

    2017-06-01

    Full Text Available The ultimate goal of a company is to build the enterprise value, which is achievable thanks to abnormal profits generated in particular period. Moreover, firms are expected to take measures to maintain abnormal profit in the future. On the other hand, abnormal profits attract competitors, who increase competition and as a result abnormal profits disappear. The persistence of profit is a term that describes a situation, when the company is successful in maintaining the abnormal profit over time. The main aim of this paper is to investigate the persistence of abnormal profit in Polish manufacturing sector. In other words, the question is whether Polish manufacturing companies are able to maintain their abnormal profits over time. The persistence of abnormal profits is investigated using dynamic panel model with generalized method-of-moments estimators. The method is applied to a panel of 5303 Polish companies from manufacturing sector observed over the period 2006-2014. This paper contributes to the existing literature in two ways. First, analysis is performed for developing country. Second, analysis is performed both at the level of entire sector and at division level. Three main conclusions can be drawn from the conducted research: there are significant differences between profit rates within the same industry at division level; estimated persistence of abnormal profit coefficients are at moderate level; there are substantial differences between estimated persistence of profit coefficients for divisions in the same industry.

  18. The prevalence of burnout syndrome in Polish anaesthesiologists.

    Science.gov (United States)

    Misiołek, Aleksandra; Gorczyca, Piotr; Misiołek, Hanna; Gierlotka, Zbigniew

    2014-01-01

    Burnout syndrome is a psychological response to chronic work-related stress characterized by low enthusiasm towards the job, high psychological exhaustion, indolence and guilt. Being a medical doctor, both in Poland and in other countries, is one of the most stressful occupations and anaesthesiology is considered one of the most stressful specializations, which justify carrying out of the study on Polish anaesthesiologists. The aim of the study was to determine the prevalence of burnout syndrome in Polish anaesthesiologists Non-randomized cross-sectional study was carried out and data were gathered through a self-administrated questionnaire. The sample consisted of 373 Polish anaesthesiologists, 57.6% were women and 42.4% were men. A 66% response rate was achieved. The Burnout Syndrome was measured by the Spanish Burnout Inventory. The prevalence burnout risk was almost 70%. The percentage of participants who indicated very high levels of burnout was 18%; 5.9% of whom fell into profile 2 considered to be clinical. The instrument applied was reliable with Cronbach's alphas exceeding 0.70. The sample is characterized by high burnout risk with 5.9% of clinical cases. Participation in prevention programs is recommended.

  19. A Comparative Analysis of Polish and Czech International New Ventures

    Directory of Open Access Journals (Sweden)

    Lidia Danik

    2016-06-01

    Full Text Available The goal of this paper is to compare the characteristics of Polish and Czech companies which follow the Born Global internationalization model. More concretely, the analysis aims to discover the differences or similarities in terms of the internationalization paths of Polish and Czech SMEs in the characteristics of their managers in terms of the so-called “international vision” and in their innovativeness level. The introductory part of article provides a description of this internationalization model and the International New Ventures traits (INV and summarizes the recent studies on this topic conducted in Poland and Czech Republic. In the empirical part, the International New Ventures from the two countries are compared. The Polish sample includes 105 companies which were surveyed with use of computer assisted telephone interviews in autumn 2014. For the Czech Republic, the sample consists of 54 small and medium-sized companies, which were surveyed using the computer assisted web interviews from November 2013 till January 2014. The surveyed companies in both countries fulfilled the definition of Born Globals. Descriptive statistics, cross-tabulation analysis and non-parametric tests are applied to accomplish the goals of the paper.

  20. Fungal Biomass Protein Production from Trichoderma harzianum Using Rice Polishing.

    Science.gov (United States)

    Ahmed, Sibtain; Mustafa, Ghulam; Arshad, Muhammad; Rajoka, Muhammad Ibrahim

    2017-01-01

    Industrially important enzymes and microbial biomass proteins have been produced from fungi for more than 50 years. High levels of crude protein as much as 45% are present in fungal biomass with balanced essential amino acids. The aim of this study was to access the potential of Trichoderma harzianum to produce fungal biomass protein from rice polishings. Maximum biomass yield was obtained at 5% (w/v) rice polishings after 72 h of incubation at 28°C at pH 4. Carbon and nitrogen ratio of 20 : 1 gave significantly higher production of fungal biomass protein. The FBP in the 75 L fermenter contained 49.50% crude protein, 32.00% true protein, 19.45% crude fiber, 9.62% ash, 11.5% cellulose content, and 0.325% RNA content. The profile of amino acids of final FBP exhibited that all essential amino acids were present in great quantities. The FBP produced by this fungus has been shown to be of good nutritional value for supplementation to poultry. The results presented in this study have practical implications in that the fungus T. harzianum could be used successfully to produce fungal biomass protein using rice polishings.

  1. Antimicrobial susceptibility of Brachyspira hyodysenteriae isolated from 21 Polish farms.

    Science.gov (United States)

    Zmudzki, J; Szczotka, A; Nowak, A; Strzelecka, H; Grzesiak, A; Pejsak, Z

    2012-01-01

    Swine dysentery (SD) is a common disease among pigs worldwide, which contributes to major production losses. Antimicrobial susceptibility testing of B. hyodysenteriae, the etiological agent of SD, is mainly performed by the agar dilution method. This method has certain limitations due to difficulties in interpretation of results. The aim of this study was the analysis of antimicrobial susceptibility of Brachyspira hyodysenteriae (B. hyodysenteriae) Polish field isolates by broth microdilution procedure. The study was performed on 21 isolates of B. hyodysenteriae, collected between January 2006 to December 2010 from cases of swine dysentery. VetMIC Brachyspira panels with antimicrobial agents (tiamulin, valnemulin, doxycycline, lincomycin, tylosin and ampicillin) were used for susceptibility testing of B. hyodysenteriae. The minimal inhibitory concentration (MIC) was determined by the broth dilution procedure. The lowest antimicrobial activity was demonstrated for tylosin and lincomycin, with inhibition of bacterial growth using concentrations > 128 microg/ml and 32 microg/ml, respectively. In the case of doxycycline, the MIC values were < or = 2.0 microg/ml. No decreased susceptibility to tiamulin was found among the Polish isolates and MIC values for this antibiotic did not exceed 1.0 microg/ml. The results of the present study confirmed that Polish B. hyodysenteriae isolates were susceptible to the main antibiotics (tiamulin and valnemulin) used in treatment of swine dysentery. Further studies are necessary to evaluate a possible slow decrease in susceptibility to tiamulin and valnemulin of B. hyodysenteriae strains in Poland.

  2. Surface qualities after chemical-mechanical polishing on thin films

    International Nuclear Information System (INIS)

    Fu, Wei-En; Lin, Tzeng-Yow; Chen, Meng-Ke; Chen, Chao-Chang A.

    2009-01-01

    Demands for substrate and film surface planarizations significantly increase as the feature sizes of Integrated Circuit (IC) components continue to shrink. Chemical Mechanical Polishing (CMP), incorporating chemical and mechanical interactions to planarize chemically modified surface layers, has been one of the major manufacturing processes to provide global and local surface planarizations in IC fabrications. Not only is the material removal rate a concern, the qualities of the CMP produced surface are critical as well, such as surface finish, defects and surface stresses. This paper is to examine the CMP produced surface roughness on tungsten or W thin films based on the CMP process conditions. The W thin films with thickness below 1000 nm on silicon wafer were chemical-mechanical polished at different down pressures and platen speeds to produce different surface roughness. The surface roughness measurements were performed by an atomic force microscope (DI D3100). Results show that the quality of surface finish (R a value) is determined by the combined effects of down pressures and platen speeds. An optimal polishing condition is, then, possible for selecting the down pressures and platen speeds.

  3. Preparation of cerium oxide for lens polishing powder

    International Nuclear Information System (INIS)

    Injarean, Uthaiwan; Rodthongkom, Chouvana; Pichestapong, Pipat; Changkrurng, Kalaya

    2003-10-01

    Cerium is an element of rare earth group which is called lanthanide series. It is found in the ores like monazite and xenotime which are the tailings of tin mines in the south of Thailand. Cerium is used mostly as lens polishing powder besides the applications in other industries. In this study, cerium extracted from monazite ore breakdown by alkaline process was used for the preparation of lens polishing powder. Cerium hydroxide cake from the process was dissolved by hydrochloric acid and precipitated with oxalic acid. The oxalate precipitate then was calcined to oxide powder and its particle size was measured. Precipitation conditions being studied are concentration of feed cerium chloride solution, concentration of oxalic acid used for the precipitation, concentration of sulfuric acid used as precipitation control reagent and the precipitation temperature. It was found that the appropriate precipitation conditions yielded the fine oxide powder with particle size about 12μm. The oxide powder can be ground to the size of 1-3 μm which is suitable for making lens polishing powder

  4. The Link between National Foreign Policy and the Performance of a Country in the European Union: The Polish Case

    Directory of Open Access Journals (Sweden)

    Joanna Kaminska

    2010-05-01

    Full Text Available This article examines the link between the adaptation of national executives and diplomats to the EU and the capacity of a state to influence EU foreign policy outcomes. It argues that, in the case of Poland, the politicization of the domestic administrative structures before 2004 constrained the ability of the state to impact on the EU’s external agenda after the enlargement. It also claims that a rapid adaptation to the EU occurred only after the Polish accession to the EU, as the will to influence the EU’s policy towards Eastern Europe was a main driver for changes in the national diplomacy.

  5. Can Reduced-Step Polishers Be as Effective as Multiple-Step Polishers in Enhancing Surface Smoothness?

    Science.gov (United States)

    Kemaloglu, Hande; Karacolak, Gamze; Turkun, L Sebnem

    2017-02-01

    The aim of this study was to evaluate the effects of various finishing and polishing systems on the final surface roughness of a resin composite. Hypotheses tested were: (1) reduced-step polishing systems are as effective as multiple-step systems on reducing the surface roughness of a resin composite and (2) the number of application steps in an F/P system has no effect on reducing surface roughness. Ninety discs of a nano-hybrid resin composite were fabricated and divided into nine groups (n = 10). Except the control, all of the specimens were roughened prior to be polished by: Enamel Plus Shiny, Venus Supra, One-gloss, Sof-Lex Wheels, Super-Snap, Enhance/PoGo, Clearfil Twist Dia, and rubber cups. The surface roughness was measured and the surfaces were examined under scanning electron microscope. Results were analyzed with analysis of variance and Holm-Sidak's multiple comparisons test (p One-gloss, Enamel Plus Shiny, and Venus Supra groups. (1) The number of application steps has no effect on the performance of F/P systems. (2) Reduced-step polishers used after a finisher can be preferable to multiple-step systems when used on nanohybrid resin composites. (3) The effect of F/P systems on surface roughness seems to be material-dependent rather than instrument- or system-dependent. Reduced-step systems used after a prepolisher can be an acceptable alternative to multiple-step systems on enhancing the surface smoothness of a nanohybrid composite; however, their effectiveness depends on the materials' properties. (J Esthet Restor Dent 29:31-40, 2017). © 2016 Wiley Periodicals, Inc.

  6. Medicinal Plant Diversity and Inter-Cultural Interactions between Indigenous Guarani, Criollos and Polish Migrants in the Subtropics of Argentina

    Science.gov (United States)

    Kujawska, Monika; Hilgert, Norma I.; Keller, Héctor A.; Gil, Guillermo

    2017-01-01

    Numerous studies highlight the importance of phytotherapy for indigenous and non-indigenous people in different parts of the world. In this work we analyze the richness (number of species), diversity (plant identity and the number of illnesses for which it is used) and similarity of plant species and illnesses treated with them, in order to contribute new data and insight into the importance of plant medicines to the local medical systems of people living in Misiones province, in the subtropics of Argentina. Three sympatric groups were compared: Guarani Indians, Criollos (mestizos) and Polish migrants. Quantitative scrutiny was focused on both primary and secondary sources. The similarity and diversity of medicinal plants and uses between groups was calculated by applying the Sørensen quantitative coefficient and the Shannon-Wiener index, respectively. In order to identify the characteristic plant species used by each group, the Cultural Importance and Prevalence Value (CIPV) was calculated based on the species Indicator Value (IndVal), which combines a species relative abundance with its relative frequency of occurrence in the various groups, and modified according to the type of the analyzed data. The important finding is a great variation in the number of species used by the study groups. Altogether, 509 botanical species were registered: Guarani (397), Criollos (243) and Polish migrants (137). For all groups, the use of native medicinal plants prevailed. The Guarani appear to be the local experts in use of medicinal plants. There is the significant difference in the number of treated illnesses by each taxon among three groups. Criollos and Polish migrants exhibit the greatest similarity in illnesses treated with medicinal plants. These groups share a corpus of knowledge related to illness nosology, and have a symptomatic approach to illness treatment. The Guarani have an etiological approach to illness diagnosis and healing, which may be viewed as a barrier to

  7. Medicinal Plant Diversity and Inter-Cultural Interactions between Indigenous Guarani, Criollos and Polish Migrants in the Subtropics of Argentina.

    Science.gov (United States)

    Kujawska, Monika; Hilgert, Norma I; Keller, Héctor A; Gil, Guillermo

    2017-01-01

    Numerous studies highlight the importance of phytotherapy for indigenous and non-indigenous people in different parts of the world. In this work we analyze the richness (number of species), diversity (plant identity and the number of illnesses for which it is used) and similarity of plant species and illnesses treated with them, in order to contribute new data and insight into the importance of plant medicines to the local medical systems of people living in Misiones province, in the subtropics of Argentina. Three sympatric groups were compared: Guarani Indians, Criollos (mestizos) and Polish migrants. Quantitative scrutiny was focused on both primary and secondary sources. The similarity and diversity of medicinal plants and uses between groups was calculated by applying the Sørensen quantitative coefficient and the Shannon-Wiener index, respectively. In order to identify the characteristic plant species used by each group, the Cultural Importance and Prevalence Value (CIPV) was calculated based on the species Indicator Value (IndVal), which combines a species relative abundance with its relative frequency of occurrence in the various groups, and modified according to the type of the analyzed data. The important finding is a great variation in the number of species used by the study groups. Altogether, 509 botanical species were registered: Guarani (397), Criollos (243) and Polish migrants (137). For all groups, the use of native medicinal plants prevailed. The Guarani appear to be the local experts in use of medicinal plants. There is the significant difference in the number of treated illnesses by each taxon among three groups. Criollos and Polish migrants exhibit the greatest similarity in illnesses treated with medicinal plants. These groups share a corpus of knowledge related to illness nosology, and have a symptomatic approach to illness treatment. The Guarani have an etiological approach to illness diagnosis and healing, which may be viewed as a barrier to

  8. State of the art in the insight into experimentally observed mesons and baryons predicted by current fundamental models of particle physics

    International Nuclear Information System (INIS)

    Bednar, M.; Hron, J.

    2001-01-01

    Current insight into mesons and baryons is highlighted, their classification is given, and their arrangement into multiplets is described. A brief chronological overview of discoveries of the most important mesons and baryons is presented, followed by a description of the attempts to find fundamental particles between mesons and baryons, which could be composed of other mesons and baryons (Fermi-Yang model, Sakata model, Ikea-Ohnuki-Ogawa model). The attempts ultimately led to the formulation of the quark model. The quark structure of some mesons and baryons is presented. The quark model foresees the existence of mesons and baryons that have not yet been discovered. (Z.J.)

  9. On the Dictionary of Semantic Equivalents in Polish, Bulgarian and Russian"

    Directory of Open Access Journals (Sweden)

    Wojciech Paweł Sosnowski

    2016-12-01

    Full Text Available On the Dictionary of Semantic Equivalents in Polish, Bulgarian and Russian Leksykon odpowiedniości semantycznych w języku polskim, bułgarskim i rosyjskim [The Dictionary of Semantic Equivalents in Polish, Bulgarian and Russian] is the first Polish dictionary which compares semantic equivalents in the largest languages of each Slavic subgroup: The West Slavic group (Polish, the South Slavic group (Bulgarian and the East Slavic group (Russian. The content of the dictionary reflects the social processes, changes and trends which have taken place over recent years. The dictionary consists of 5 volumes, with approximately 5000 entries for each language. What sets it apart from other dictionaries is that it ventures beyond the standard vocabulary one might expect from a dictionary of this sort. Leksykon also contains neologisms as well as realogisms - words which do not often have perfect equivalents in other languages because they are so deeply embedded in a nation’s culture. Each entry in the dictionary offers state-of-the-art semantic and syntactic categorisers, developed by Polish experts in Slavic semantics and aspectology. We consider the dictionary to be an innovation in lexicography, because its open structure enables more languages to be added in the future, including non-Slavic languages. Developed with the use of the most recent methodologies available, the dictionary will constitute a sound basis for lexicographic research in the future, in particular for the development of multilingual electronic dictionaries. In the 21st century, we face two great challenges: to make academic research more interdisciplinary and to build an integrated multinational European community. We hope that our dictionary will help address these challenges by promoting multilingualism and facilitating intercultural communication.The primary language of the dictionary is Polish - the largest Slavic language in the European Union. During the Polish

  10. Condensate-polisher resin-leakage quantification and resin-transport studies

    International Nuclear Information System (INIS)

    Stauffer, C.C.; Doss, P.L.

    1983-04-01

    The objectives of this program were to: (1) determine the extent of resin leakage from current generation condensate polisher systems, both deep bed and powdered resin design, during cut-in, steady-state and flow transient operation, (2) analyze moisture separator drains and other secondary system samples for resin fragments and (3) document the level of organics in the secondary system. Resin leakage samples were obtained from nine-power stations that have either recirculating steam generators or once through steam generators. Secondary system samples were obtained from steam generator feedwater, recirculating steam generator blowdown and moisture separator drains. Analysis included ultraviolet light examination, SEM/EDX, resin quantification and infrared analysis. Data obtained from the various plants were compared and factors affecting resin leakage were summarized

  11. Negentropy Generation and Fractality in the Dry Friction of Polished Surfaces

    Directory of Open Access Journals (Sweden)

    Mordecai Segall

    2010-03-01

    Full Text Available We consider the Robin Hood model of dry friction to study entropy transfer during sliding. For the polished surface (steady state we study the probability distribution of slips and find an exponential behavior for all the physically relevant asperity interaction-distance thresholds. In addition, we characterize the time evolution of the sample by its spatial fractal dimension and by its entropy content. Starting from an unpolished surface, the entropy decreases during the Robin Hood process, until it reaches a plateau; thereafter the system fluctuates above the critical height. This validates the notion that friction increases information in the neighborhood of the contacting surface at the expense of losing information in remote regions. We explain the practical relevance of these results for engineering surface processing such as honing.

  12. The Role of Second Chambers in the Polish and Romanian Political Systems

    Directory of Open Access Journals (Sweden)

    Dario Čepo

    2007-01-01

    Full Text Available The paper outlines the development of bicameral legislatures, distinguishing between the British and American model of bicameralism. It also seeks to demonstrate the power of second chambers based on the difference between the unitary and federal states, presenting Arend Lijphart’s tipology of bicameral legislatures. Moreover, it tries to give a brief outline of the bicameral-unicameral dichotomy in Central and Eastern Europe, and show the questionable legitimacy of second chambers in unitary countries. Using the Senates in Poland and Romania as illustrations, it seeks to highlight their dissimilar historical-institutional development, the differences in their powers and operation and their relationship with first chambers. It also seeks to assign both Senates typologically to one of Lijphart’s four bicameral types, using six relevant variables and highlighting the main difference because of which the Polish Senate is subordinated and the Romanian Senate is equal to the first chamber.

  13. Materials of yearly scientific assembly of Polish Chemical Society, Lublin 1995

    International Nuclear Information System (INIS)

    1995-01-01

    Scientific conference accompanied the yearly assembly of Polish Chemical Society has bee held in 1995 in Lublin. The general review on scientific progress of the most important field of chemistry in Poland have been presented. The conference has been divided into 16 plenary sessions and 3 microsymposia. The sessions topics as follows: S-1 - physical chemistry; S-2 - physicochemistry of the surface; S-3 - catalysis; S-4 - chemical technology; S-5 - inorganic chemistry; S-6 - coordination chemistry; S-7 -crystallochemistry; S-8 - electrochemistry; S-9 - organic chemistry; S-10 -chemistry of polymers; S-11 - chemistry in medicine; S-12 - chemistry and technology of solid state materials; S-13 - young scientists forum; S-14 -didactics in chemistry; S-15 - theoretical chemistry; S-16 - environmental protection. Also the 3 microsymposia have been organized. It was: M-1 -chemistry of heteroorganic compounds; M-2 chromatography; M-3 - plasma chemistry

  14. Materials of All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection

    International Nuclear Information System (INIS)

    1998-01-01

    The All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection is cyclic (in 3 year period) conference being a broad review of state of art and development of all nuclear branches cooperated with industry and other branches of national economy and public life in Poland. The conference has been divided in one plenary session and 8 problem sessions as follow: Radiation technologies of flue gas purification; radiation technologies in food and cosmetic industry; application of nuclear techniques in environmental studies and earth science; radiometric methods in material engineering; isotope tracers in biological studies and medical diagnostics; radiometric industrial measuring systems; radiation detectors and device; nuclear methods in cultural objects examination. The poster section as well as small exhibition have been also organised

  15. Neologisms in bilingual digital dictionaries (on the example of Bulgarian-Polish dictionary

    Directory of Open Access Journals (Sweden)

    Ludmila Dimitrova

    2015-11-01

    Full Text Available Neologisms in bilingual digital dictionaries (on the example of Bulgarian-Polish dictionary The paper discusses the presentation of neologisms in the recent version of the Bulgarian-Polish digital dictionary. We also continue the discussion of important problems related to the classifiers of the verbs as headwords of the digital dictionary entries. We analyze some examples from ongoing experimental version of the Bulgarian-Polish digital dictionary.

  16. Poland, a workforce in transition: Exploring leadership styles and effectiveness of Polish vs. Western expatriate managers

    OpenAIRE

    Eisenberg, Jacob; Pieczonka, Artur; Eisenring, Martin; Mironski, Jacek

    2015-01-01

    Given the cultural differences between Western Europe and Poland, differences are expected in leadership styles and behaviours between Polish and Western managers. Our study explored Polish employees’ perceptions and attitudes toward expatriate Western versus local managers. The main method was surveying Polish employees working under Western managers in three mid-size companies. We supplemented the survey with in-depth interviews with five West European middle managers working in Poland. We ...

  17. Composite adaptive control of belt polishing force for aero-engine blade

    Science.gov (United States)

    Zhsao, Pengbing; Shi, Yaoyao

    2013-09-01

    The existing methods for blade polishing mainly focus on robot polishing and manual grinding. Due to the difficulty in high-precision control of the polishing force, the blade surface precision is very low in robot polishing, in particular, quality of the inlet and exhaust edges can not satisfy the processing requirements. Manual grinding has low efficiency, high labor intensity and unstable processing quality, moreover, the polished surface is vulnerable to burn, and the surface precision and integrity are difficult to ensure. In order to further improve the profile accuracy and surface quality, a pneumatic flexible polishing force-exerting mechanism is designed and a dual-mode switching composite adaptive control(DSCAC) strategy is proposed, which combines Bang-Bang control and model reference adaptive control based on fuzzy neural network(MRACFNN) together. By the mode decision-making mechanism, Bang-Bang control is used to track the control command signal quickly when the actual polishing force is far away from the target value, and MRACFNN is utilized in smaller error ranges to improve the system robustness and control precision. Based on the mathematical model of the force-exerting mechanism, simulation analysis is implemented on DSCAC. Simulation results show that the output polishing force can better track the given signal. Finally, the blade polishing experiments are carried out on the designed polishing equipment. Experimental results show that DSCAC can effectively mitigate the influence of gas compressibility, valve dead-time effect, valve nonlinear flow, cylinder friction, measurement noise and other interference on the control precision of polishing force, which has high control precision, strong robustness, strong anti-interference ability and other advantages compared with MRACFNN. The proposed research achieves high-precision control of the polishing force, effectively improves the blade machining precision and surface consistency, and

  18. How to Investigate Polish Clusters’ Attractiveness for Inward FDI? Addressing Ambiguity Problem

    Directory of Open Access Journals (Sweden)

    Götz Marta

    2014-09-01

    Full Text Available The aim of the paper is to assess whether, and in what fashion, managers of Polish cluster organizations perceive the attractiveness of foreign direct investment in Polish clusters This research is exploratory and qualitative in nature. The complex nature of Polish clusters, which can benefit from and be competitively challenged by, FDI are identified and a conceptual framework for assessing that nature is proposed; specifically, research using the grounded theory method (GTM.

  19. Research on Laser Micro Polishing of SLS Technology Sintered Iron-Based Powder Surface

    OpenAIRE

    Gerda Vaitkūnaitė; Vladislav Markovič; Olegas Černašėjus

    2015-01-01

    The article analyzes laser micro polishing of 1.2083 steel samples produced applying selective laser sintering (SLS) method. The study has evaluated the distribution of the shape, size and temperature of the laser beam treated area in the surface layer of sintered and laser polished samples. Experimental tests have shown the impact of the technical parameters of laser micro polishing on the width and hardness of the impact zone of the treated sample. The microstructure analysis of laser treat...

  20. Development of on the machine process monitoring and control strategy in Robot Assisted Polishing

    DEFF Research Database (Denmark)

    Pilny, Lukas; Bissacco, Giuliano

    2015-01-01

    Robot Assisted Polishing (RAP) can be used to polish rotational symmetric and free form components achieving surface roughness down to Sa 10 nm. With the aim to enable unmanned robust and cost efficient application of RAP, this paper presents the development of a monitoring and control strategy....... The multisensory approach was experimentally validated in polishing with bonded abrasives demonstrating its suitability for process control in RAP....

  1. Effects of Polishing Bur Application Force and Reuse on Sintered Zirconia Surface Topography.

    Science.gov (United States)

    Fischer, N G; Tsujimoto, A; Baruth, A G

    2018-03-16

    Limited information is available on how to polish and finish zirconia surfaces following computer-aided design/computer-aided manufacturing (CAD/CAM), specifically, how differing application forces and reuse of zirconia polishing systems affect zirconia topography. To determine the effect of differing, clinically relevant, polishing application forces and multiple usages of polishing burs on the surface topography of CAD/CAM zirconia. One hundred twenty 220-grit carbide finished zirconia disks were sintered according to manufacturer's directions and divided into two groups for the study of two coarse polishing bur types. Each group was divided into subgroups for polishing (15,000 rpm) at 15 seconds for 1.0 N, 4.5 N, or 11 N of force using a purpose-built fixture. Subgroups were further divided to study the effects of polishing for the first, fifth, 15th, and 30th bur use, simulating clinical procedures. Unpolished surfaces served as a control group. Surfaces were imaged with noncontact optical profilometry (OP) and atomic force microscopy (AFM) to measure average roughness values (Ra). Polishing burs were optically examined for wear. Scanning electron microscopy (SEM) was performed on burs and zirconia surfaces. One-way ANOVA with post hoc Tukey HSD (honest significant difference) tests (α=0.05) were used for statistical analyses. AFM and OP Ra values of all polished surfaces were significantly lower than those of the unpolished control. Different polishing forces and bur reuse showed no significant differences in AFM Ra. However, significant differences in OP Ra were found due to differing application forces and bur reuse between the first and subsequent uses. SEM and optical micrographs revealed notable bur wear, increasing with increasing reuse. SEM and AFM micrographs clearly showed polished, periodic zirconia surfaces. Nanoscale topography, as analyzed with kurtosis and average groove depth, was found dependent on the specific polishing bur type. These in

  2. Acoustic emission-based in-process monitoring of surface generation in robot-assisted polishing

    DEFF Research Database (Denmark)

    Pilny, Lukas; Bissacco, Giuliano; De Chiffre, Leonardo

    2016-01-01

    The applicability of acoustic emission (AE) measurements for in-process monitoring of surface generation in the robot-assisted polishing (RAP) was investigated. Surface roughness measurements require interruption of the process, proper surface cleaning and measurements that sometimes necessitate...... automatic detection of optimal process endpoint allow intelligent process control, creating fundamental elements in development of robust fully automated RAP process for its widespread industrial application....... removal of the part from the machine tool. In this study, stabilisation of surface roughness during polishing rotational symmetric surfaces by the RAP process was monitored by AE measurements. An AE sensor was placed on a polishing arm in direct contact with a bonded abrasive polishing tool...

  3. Surface analysis of polished fused-silica laser lenses by ion-scattering spectrometry

    International Nuclear Information System (INIS)

    Orvek, K.; Steward, S.A.

    1982-01-01

    New advances in high-powered glass lasers, particularly the NOVA system, have resulted in a need for lenses having higher damage threshold values than those now available. It is currently thought that surface contaminants on the lenses are responsible for initiating part of the damage. These contaminants are apparently introduced during the final polishing stages. In this study, we used ion-scattering spectrometry (ISS) to identify contaminants arising through the use of different polishing techniques. Five lenses were studied, each having undergone different polishing procedures. The first lens was not polished after receiving it from the manfacturer (No. 381). Ion microprobe data were available for this lens, and they were compared to ISS results. The second lens had been polished with rouge, a polishing compound no longer in use (No. 796). This sample served as a further check on the ISS results. The third lens was studied as received from the manufacturer - with no handling or cleaning (No. 802). The final two lenses had both been polished using high-purity ceria, cerium oxide (No. 800 and No. 801). The difference between these two was that No. 800 was polished using a nylon lap, and No. 801 was polished using pitch as a lap. The 800-series lenses were all made from the same batch, and constituted the major part of the investigation

  4. Damage-free polishing of monocrystalline silicon wafers without chemical additives

    International Nuclear Information System (INIS)

    Biddut, A.Q.; Zhang, L.C.; Ali, Y.M.; Liu, Z.

    2008-01-01

    This investigation explores the possibility and identifies the mechanism of damage-free polishing of monocrystalline silicon without chemical additives. Using high resolution electron microscopy and contact mechanics, the study concludes that a damage-free polishing process without chemicals is feasible. All forms of damages, such as amorphous Si, dislocations and plane shifting, can be eliminated by avoiding the initiation of the β-tin phase of silicon during polishing. When using 50 nm abrasives, the nominal pressure to achieve damage-free polishing is 20 kPa

  5. Macroeconomic, legal, administrative and cultural factors of technological innovations1 in Polish industrial enterprises

    Directory of Open Access Journals (Sweden)

    Stanisław Sudoł

    2016-12-01

    The vast majority of experts participating in the study positively assessed the cultural conditions of technological innovativeness in Polish enterprises. Experts also provided negative cultural characteristics of Poles.

  6. Specialist English as a foreign language for European public health: evaluation of competencies and needs among Polish and Lithuanian students.

    Science.gov (United States)

    Sumskas, Linas; Czabanowska, Katarzyna; Bruneviciūte, Raimonda; Kregzdyte, Rima; Krikstaponyte, Zita; Ziomkiewicz, Anna

    2010-01-01

    Foreign languages are becoming an essential prerequisite for a successful carrier among all professions including public health professionals in many countries. The expanding role of English as a mode of communication allows for university graduates to project and to seek their career in English-speaking countries. The present study was carried out in the framework of EU Leonardo da Vinci project "Specialist English as a foreign language for European public health." The study aimed to get a deeper insight how the English language is perceived as a foreign language, by Polish and Lithuanian public health students, what is level of their language competence, which level of English proficiency they expect to use in future. MATERIAL AND METHODS. A total of 246 respondents completed the special questionnaires in autumn semester in 2005. A questionnaire form was developed by the international project team. For evaluation of English competences, the Language Passport (Common European Framework of Reference for Languages of Council of Europe) was applied. RESULTS. Current self-rated proficiency of the English language was at the same level for Lithuanian (3.47+/-1.14) and Polish (3.31+/-0.83) respondents (P>0.05). Majority of respondents (88.6% of Lithuanian and 87.8% of Polish) reported using the English language for their current studies. Respondents reported a significant increase in necessity for higher level of English proficiency in future: mean scores provided by respondents changed from B1 level to B2 level. Respondents gave priority to less formal and practice-based interactive English teaching methods (going abroad, contacts with native speakers) in comparison with theory-oriented methods of learning (self-studying, Internet courses). CONCLUSIONS. Similar levels of English language in all five areas of language skills were established in Polish and Lithuanian university students. Respondents gave more priorities to less formal and practice-based interactive

  7. International Trade and Economic Growth in the Polish Economy

    Directory of Open Access Journals (Sweden)

    Henryk Gurgul

    2010-01-01

    Full Text Available The paper presents the results of examinations of linear and nonlinear causalities performed for international trade involving the Polish economy and its economic growth. In order to infer the impact of the world crisis on the Polish economy, two samples have been studied (containing quarterly data – a full sample (Q1 1996–Q3 2009 and pre-crisis sample (Q1 1996–Q3 2008. The results of linear causality tests support the existence of feedback between the growth rate of exports and growth in gross domestic product (GDP irrespectively of the time period chosen. For both the samples examined, no direct causal links between the growth rates of GDP and imports were detected. One can only suppose the existence of indirect links before the crisis. Bidirectional causality was found for growth rates of exports and imports only for the pre-crisis sample. Some weak evidence of a causal link running from the growth rate of imports to the growth rate of exports was also found for the period that covers the crisis, which may be interpreted as a confirmation of the fact that growth in imports also precedes growth in exports in bullish periods. It results from our computations that, at the time of the financial crisis of 2008, the main factor that caused Polish GDP growth to remain positive was domestic demand. The results of nonlinear causality analysis provided only weak evidence for causality running from GDP to exports, from GDP to imports and from imports to exports. (original abstract

  8. Analysis of the Motor Activities of Professional Polish Soccer Players

    Directory of Open Access Journals (Sweden)

    Andrzejewski Marcin

    2016-12-01

    Full Text Available Introduction. The aims of the present study were to determine the activity profiles of a large sample of Polish Premier League soccer players during elite-standard soccer matches depending on their position on the pitch and the intensity range of physical activity. Material and methods. The study sample comprised 1,178 players in 5 outfield positions: external defenders (ED, n = 289, central defenders (CD, n = 307, central midfield players (CM, n = 327, external midfield players (EM, n = 152, and forwards (F, n = 103. Altogether, 81 Polish League games held during four domestic seasons (2010-2011, 2011-2012, 2012-2013, and 2013-2014 were used in the analysis. A semi-automatic computerised player tracking system (Amisco Pro®, version 1.0.2, Nice, France was applied to create the match activity profiles of the teams. Results. The results of statistical analysis revealed that the average total distance covered by all the players (n = 1,178 was 11,313 ± 852 m. With respect to the players’ position on the pitch, the central midfielders travelled the longest average distance (11,894 ± 765 m during the game. The longest distance was covered in the V1 intensity range (62%, followed by V2 (15%, V3 (10%, V4 (8%, V5 (3%, and V6 (2%. Conclusions. The objective of this study was to verify the differences among playing positions and to quantify the demands placed on elite Polish soccer players in each individual position during match play. While analysing elite-level match play in terms of the overall distance covered in different categories of intensity, we found a number of statistically significant differences between different playing positions. The data presented in this study can be regarded as norms for elite soccer players, serve for present and future comparison, and represent the scientific basis for developing position-specific conditioning/training protocols in soccer.

  9. Polish Code of Ethics of a Medical Laboratory Specialist.

    Science.gov (United States)

    Elżbieta, Puacz; Waldemar, Glusiec; Barbara, Madej-Czerwonka

    2014-09-01

    Along with the development of medicine, increasingly significant role has been played by the laboratory diagnostics. For over ten years the profession of the medical laboratory specialist has been regarded in Poland as the autonomous medical profession and has enjoyed a status of one of public trust. The process of education of medical laboratory specialists consists of a five-year degree in laboratory medicine, offered at Medical Universities, and of a five-year Vocational Specialization in one of the fields of laboratory medicine such as clinical biochemistry, medical microbiology, medical laboratory toxicology, medical laboratory cytomorphology and medical laboratory transfusiology. An important component of medical laboratory specialists' identity is awareness of inherited ethos obtained from bygone generations of workers in this particular profession and the need to continue its further development. An expression of this awareness is among others Polish Code of Ethics of a Medical Laboratory Specialist (CEMLS) containing a set of values and a moral standpoint characteristic of this type of professional environment. Presenting the ethos of the medical laboratory specialist is a purpose of this article. Authors focus on the role CEMLS plays in areas of professional ethics and law. Next, they reconstruct the Polish model of ethos of medical diagnostic laboratory personnel. An overall picture consists of a presentation of the general moral principles concerning execution of this profession and rules of conduct in relations with the patient, own professional environment and the rest of the society. Polish model of ethical conduct, which is rooted in Hippocratic medical tradition, harmonizes with the ethos of medical laboratory specialists of other European countries and the world.

  10. Congress of the Polish Chamber of Tourism - Egypt 2017

    Directory of Open Access Journals (Sweden)

    Marek Napierała

    2017-12-01

    Full Text Available The aim of the article is to assess the effectiveness of the Congress of the Polish Chamber of Tourism 2017 in the elaboration of joint applications regarding the provision of substantive and logistical support to entrepreneurs as well as the pursuit of comprehensive regulation of tourism law; adaptation of Polish law to European standards. Research problems: What is the legal status in the field of tourism law regarding outgoing tourism, incoming tourism and MICE, children and youth tourism, domestic tourism and accommodation facilities, travel agents and air transport? What are the main problems of the industries and what are their solutions proposed? What is the position and conclusions of the Congress? Research methods: study of documents, source materials, study of Congress materials, interviews with participants of the Congress, personal participation in the Congress. The PIT Congress took place on 25.11. - 2.12.2017 in Egypt (Marsa Alam: "Groundbreaking changes in tourism law: challenges and problems". The aim of the Congress was to develop a common position in the field of tourism law on outgoing tourism, incoming tourism and MICE, children and youth tourism, domestic tourism and accommodation facilities, travel agents and air transport. PIT is the largest nationwide organization of the economic self-government of the tourism industry. Polish Chamber of Tourism, which is a full member of the European Union of Travel Agencies of the European Union (ECTAA. From the beginning of its existence (25 years of activity, it has been successfully applying for a new shape of tourist business in Poland. Conclusions: - trainings should be carried out using the latest laws, - substantive and logistical support should be provided to entrepreneurs, - strive for comprehensive regulation of tourism law, - tourism needs a host so that it can be prioritized as an important branch of the economy.

  11. THE EFFECTIVENESS OF INNOVATION PROJECTS IN POLISH INDUSTRY

    Directory of Open Access Journals (Sweden)

    Jan Zwolak

    2016-03-01

    Full Text Available The objective of the study was to determine the dependency of the net income from the sales of new and significantly modernised products on the expenditure on (1 marketing and staff training as well as on the expenditure on (2 land, buildings and structures; machinery, technical equipment and tools; and means of transportation within the scope of product and process innovations in Polish industry in 2010. Furthermore the study was intended to determine the effectiveness of the abovementioned expenditure aggregated to descriptive variables (1 and 2. In the study, the correlation and regression methods as well as the least squares method was applied.The estimation resulted in the determination of functional dependency of net sales income on the expenditure on marketing and staff training (0.5040 as well as on the expenditure on land, buildings and structures; machinery, technical equipment and tools; and means of transportation (0.8064 in the field of innovative processes in industry. The net sales income increased more than proportionally relative to the combined effect of the aforementioned expenditure (1.3104. The total increase in the aforementioned expenditure by 10% resulted in the increase in net sales income by 13.1%. The determined power regression model may have practical implications for the economic evaluation of expenditure in innovative processes in Polish industry in the future, as well as for the forecast (prediction.The expenditure application in innovative processes may also have social implications connected to the increase in the value-in-use of products and with the increase in the social efficiency of work in Polish industry.

  12. Database for content of mercury in Polish brown coal

    Science.gov (United States)

    Jastrząb, Krzysztof

    2018-01-01

    Poland is rated among the countries with largest level of mercury emission in Europe. According to information provided by the National Centre for Balancing and Management of Emissions (KOBiZE) more than 10.5 tons of mercury and its compounds were emitted into the atmosphere in 2015 from the area of Poland. Within the scope of the BazaHg project lasting from 2014 to 2015 and co-financed from the National Centre of Research and Development (NCBiR) a database was set up with specification of mercury content in Polish hard steam coal, coking coal and brown coal (lignite) grades. With regard to domestic brown coal the database comprises information on coal grades from Brown Coal Mines of `Bełchatów', `Adamów', `Turów' and `Sieniawa'. Currently the database contains 130 records with parameters of brown coal, where each record stands for technical analysis (content of moisture, ash and volatile particles), elemental analysis (CHNS), content of chlorine and mercury as well as net calorific value and combustion heat. Content of mercury in samples of brown coal grades under test ranged from 44 to 985 μg of Hg/kg with the average level of 345 μg of Hg/kg. The established database makes up a reliable and trustworthy source of information about content of mercury in Polish fossils. The foregoing details completed with information about consumption of coal by individual electric power stations and multiplied by appropriate emission coefficients may serve as the background to establish loads of mercury emitted into atmosphere from individual stations and by the entire sector of power engineering in total. It will also enable Polish central organizations and individual business entities to implement reasonable policy with respect of mercury emission into atmosphere.

  13. Normative analysis of budgetary incomes from customs in the Polish legal system

    Directory of Open Access Journals (Sweden)

    Adam Drozdek

    2017-06-01

    Full Text Available The state budget constitutes a main institution of a budget law. It is subject to the regulation of many legal provisions, including constitutional provisions and provisions of the Act on Public Finances, which results in various properties thereof. The state budget is established by the Sejm as the most important financial plan for the state policy and an instrument of social policy, taking into consideration planned incomes and expenses of the state for the following financial year. From the point of view of incomes, the state budget includes, among others: incomes from indirect and direct taxes and non-tax incomes. Customs, as benefits of a non-tax character, which are charged by the Polish customs administration in the international trade, belong to particular types of the budget incomes. By using particular construction elements of customs, e.g. rates, reliefs or exemptions, the legislator can influence the amount of incomes it obtains. This level also depends on the amount of an import, an exchange rate as well as the scale of using tariff and non-tariff measures of customs policy.

  14. Effect of polishing instruments and polishing regimens on surface topography and phase transformation of monolithic zirconia: An evaluation with XPS and XRD analysis.

    Science.gov (United States)

    Al-Haj Husain, Nadin; Camilleri, Josette; Özcan, Mutlu

    2016-12-01

    Polishing procedures might alter monolithic zirconia (MZ) surface resulting in phase changes that can be deleterious for clinical performance and antagonist tooth wear. This study investigated the topographical features and phase transformation in MZ after polishing with different regimens simulating the clinical workflow. ​ MZ specimens (Katana Zirconia HT, Kuraray-Noritake) (12×12×1.8 mm(3)) were grinded and polished using one of the five systems assessed: BG: Silicone carbide polishers (Brownie, Greenie, Super Greenie); CG: Diamond impregnated ceramic polisher kit (Ceragloss); EV: Synthetically bonded grinder interspersed with diamond (EVE Kit); SL: Urethane coated paper with aluminium oxide grits (Soflex Finishing and Polishing System Kit) and DB: Diamond bur (8 µm). Polished specimens were initially roughened with 220 µm diamond burs (Grinding Bur-GB) (10 s, 160.000160,000 rpm) and considered for baseline measurements. Polishing regimens were performed for 10 s using a slow-speed hand piece under water-cooling except for SL, in a custom made device (750 g; 5000 and 75,000 rpm). Surface roughnesses, phase changes (XRD) were assessed, surface characterization was performed (SEM, EDS). The highest roughness was obtained with the EV system (1.11 µm) compared to those of other systems (0.13-0.4 µm) (pθ and minor peak at 34.94°2θ. While GB, CG, EV, SL and DB exhibited a peak shift to the left, BG demonstrated a right peak shift on the 2θ scale. Monoclinic phase change was not noted in any of the groups. All polishing methods, except BG, exhibited a peak shift towards the lower angles of the 2-theta scale. Since the peak shifts were in the order of fractions of an angle they are attributed to stress formation rather than a phase change in the material. Thus, all polishing systems tested may not be detrimental for the phase transformation of MZ. EV system resulted in the highest roughness and none of the polishing regimens restored the polishability to the

  15. Rights and obligations of communal enterprises under Polish administrative law

    International Nuclear Information System (INIS)

    Filipek, J.

    1992-01-01

    The paper elucidates the legal environment in which Polish power producing and distributing enterprises operate. In particular, the different forms of communal enterprises are described: public owned companies; public owned companies serving ''higher purposes''; communal enterprises operating on the strength of special laws; forms of organization subject to private law. Over the long term the rules in the sphere of the communal economy can be simplified. As the administrative judiciary develops, comprehensive administrative surveillance will become superfluous. The communal enterprises render their services to the citizen. The legal remedies at the citizen's disposal are the administrative complaint and the appeal to the administrative courts. (orig./HSCH) [de

  16. RISK IDENTIFICATION TOOLS – POLISH MSMES COMPANIES PRACTICES

    Directory of Open Access Journals (Sweden)

    Iwona Gorzeń-Mitka

    2013-07-01

    Full Text Available The purpose of this study is to present risk identification tools in Polish micro, small and medium-sized enterprises (MSMEs. Risk identification is a key element of the risk management process in companies. Correctly fitting risk identification tools affect the accuracy of management decisions. The result of research is to identify the leading risk identification tools used by MSMEs. The study was conducted in 2010-2012 using a mixed survey-monographic method and questionnaires. The qualitative data were obtained during the study.

  17. Discriminant analysis in Polish manufacturing sector performance assessment

    Directory of Open Access Journals (Sweden)

    Józef Dziechciarz

    2004-01-01

    Full Text Available This is a presentation of the preliminary results of a larger project on the determination of the attractiveness of manufacturing branches. Results of the performance assessment of Polish manufacturing branches in 2000 (section D „Manufacturing” – based on NACE – Nomenclatures des Activites de Communite Europeene are shown. In the research, the classical (Fisher’s linear discriminant analysis technique was used for the analysis of the profit generation ability by the firms belonging to a certain production branch. For estimation, the data describing group level was used – for cross-validation, the classes data.

  18. Theorizing Polish migration across Europe: perspectives, concepts, and methodologies

    Directory of Open Access Journals (Sweden)

    Elżbieta M. Goździak

    2016-08-01

    Full Text Available Theorizing Polish migration across Europe: perspectives, concepts, and methodologies With the focus on the post-2004 mobility of Polish citizens, in this article we discuss two interrelated questions; namely, what are the most productive ways to theorize contemporary Polish migration, and what are the most fruitful methodologies aimed at understanding Polish migration and Poles on the move? In the first part of this article we unpack three interrelated theoretical frameworks: ‘liquid migration’, ‘regimes of mobility,’ and ‘transnationalism’. The methodological discussion in the second part of the article focuses mainly on outlining and contextualizing the most common approaches to migration phenomena. By critically introducing quantitative and qualitative methodologies, we explore and indicate the advantages of the ethnographic perspective and the merits and predicaments of research engagement in multiple sites.   Polskie migracje w Europie: perspektywy, koncepcje, metodologie Z naciskiem na mobilność obywateli polskich po przyłączeniu Polski do Unii Europejskiej w 2004 roku, w niniejszym artykule staramy się odpowiedzieć na dwa powiązane ze sobą pytania: jakie są najbardziej wydajne sposoby teoretyzowania współczesnej migracji polskiej oraz jakie są najbardziej owocne metody badawcze mające na celu zrozumienie polskiej migracji po akcesji do UE? W pierwszej części artykułu przedstawiamy więc trzy powiązane ze sobą koncepcje teoretyczne: „płynna migracja”, „reżimy mobilności” oraz transnarodowość. Dyskusja metodologiczna w drugiej części artykułu skupia się natomiast głównie na przedstawieniu najczęściej stosowanej metodyki i metodologii w badaniach zjawisk migracyjnych. Wprowadzając krytyczną perspektywę na temat ilościowych i jakościowych metod badawczych, staramy się wskazać wartość poznawczą perspektywy etnograficznej oraz wady i zalety etnograficznego zaangażowania badawczego w

  19. Circular motion and Polish Doughnuts in NUT spacetime

    Science.gov (United States)

    Jefremov, Paul I.

    The astrophysical relevance of the NUT spacetime(s) is a matter of debate due to pathological properties exhibited by this solution. However, if it is realised in nature, then we should look for the characteristic imprints of it on possible observations. One of the major sources of data on black hole astrophysics is the accretion process. Using a simple but fully analytical ``Polish Doughnuts'' model of accretion disk one gets both qualitative and quantitative differences from the Kerr spacetime produced by the presence of the gravitomagnetic charge. The present paper is based on our work Jefremov & Perlick (2016).

  20. Advanced ion exchange resins for PWR condensate polishing

    International Nuclear Information System (INIS)

    Hoffman, B.; Tsuzuki, S.

    2002-01-01

    The severe chemical and mechanical requirements of a pressurized water reactor (PWR) condensate polishing plant (CPP) present a major challenge to the design of ion exchange resins. This paper describes the development and initial operating experience of improved cation and anion exchange resins that were specifically designed to meet PWR CPP needs. Although this paper focuses specifically on the ion exchange resins and their role in plant performance, it is also recognized and acknowledged that excellent mechanical design and operation of the CPP system are equally essential to obtaining good results. (authors)

  1. Specificity of Geotechnical Measurements and Practice of Polish Offshore Operations

    Directory of Open Access Journals (Sweden)

    Bogumil Laczynski

    2015-12-01

    Full Text Available As offshore market in Europe grows faster and faster, new sea areas are being managed and new ideas on how to use the sea potential are being developed. In North Sea, where offshore industry conducts intensive expansion since late 1960s, numerous wind farms, oil and gas platforms and pipelines have been put into operation following extensive research, including geotechnical measurement. Recently, a great number of similar projects is under development in Baltic Sea, inter alia in Polish EEZ, natural conditions of which vary from the North Sea significantly. In this paper, those differences are described together with some solutions to problems thereby arising.

  2. Polish Decadence: Leopold Staff's Igrzysko in the European Context

    Directory of Open Access Journals (Sweden)

    Julia Przybos

    2012-03-01

    expression. It is my hypothesis that taken out of its secular context, religious revisionism of the kind practiced by French decadents may be seen as shocking transgression in a fiercely catholic country like Poland. In the country that lost its independence in 1794 and was ever since seeking to regain it, Catholic Church was perceived as an essential ally in the struggle against main occupying powers: Orthodox Russia, and Protestant Prussia. In the course of the 19th century Catholicism and patriotism had been effectively fused in Polish national conscience. In this charged political context a Polish author revisiting Church dogma or tradition was at risk of being perceived not only as a religious outcast but also as a traitor to the cause of Polish independence. To test my hypothesis I propose to examine Igrzysko (Game, a forgotten play by Leopold Staff. Admired today chiefly as a poet, the young Staff wrote Igrzysko in Poland after a long sojourn in Paris where he had lived among the international crowd of fin de siècle writers and artists. The play was first produced in Lemberg in 1909 and after a few performances vanished forever from Polish theatrical repertoire. Leopold Staff's play is set in ancient Rome and depicts tribulations of an actor who, while impersonating a Christian awaiting crucifixion, converts to Christianity. In his play, Staff revives the legend of Saint Genesius, an actor in Arles who died a martyr's death in 286 under Diocletian. In Spain, Saint Genesius's legend inspired Lope de Vega who wrote Acting is Believing (Lo fingido verdadero, 1607. In France, it was the source for Jean Rotrou's Saint Genest (1646. All told, the legend of Genesius is a popular theme for artists who wish to explore the distinction between art and life. An important addition to this old tradition, Staff's play contains, however, a decadent and potentially scandalous twist. Unlike in Acting is Believing and Saint Genest, the protagonist's conversion is very short

  3. Between positivism and narrativism in Polish methodology of history

    OpenAIRE

    Brzechczyn, Krzysztof

    2013-01-01

    This paper has two main purposes. Its primary purpose is to present the reception of the discussion between positivism and narrativism in the Polish methodology of history. A secondary one is to paraphrase, using the notion apparatus of the idealisational theory of science, the issue of the accuracy of explanation. The article consists of six parts. In the first part, Hempel’s deductive-nomological (or covering-law) model of explanation is presented. In the second part, the main tenets and as...

  4. The Challenging Task of Governing Cross-Border Investment in Peripheral Regions: Polish Investors in Northeast Germany

    Directory of Open Access Journals (Sweden)

    Kinder Sebastian

    2014-12-01

    Full Text Available The article investigates the challenging task of governing cross-border investment in peripheral regions. The main objective is to identify common opportunities and obstacles in the Pomerania Euroregion by taking the case study of Polish citizens/ entrepreneurs investing in northeast Germany. This relatively new phenomenon is accompanied by large uncertainties and risks, and lacks further empirical insights. At the same time it breaks new ground, creates alternatives, calls for the development of efficient modes of cross-border cooperation and addresses mutual governance issues on an inter-regional basis between manifold stakeholders on both sides of the border. The case study summarises findings from fieldwork, elaborates a quantitative and qualitative assessment of cross-border governance measures within formal and informal institutions, and tries to formulate policy recommendations for prospective approaches

  5. A Study of Postwar Japan (1945-1950): What Insights and Lessons Can be Gained From the United States Led Rebirth of Japan

    National Research Council Canada - National Science Library

    Brinson, James D

    2006-01-01

    .... This is a study of the postwar military government and administration of Japan. It will examine the detailed preparation, the initial objectives, and the execution of the occupation by the United States (US)-led forces...

  6. Solving the problem of smoking in the Polish enterprises during 2003-2015.

    Science.gov (United States)

    Korzeniowska, Elżbieta; Puchalski, Krzysztof

    2018-01-15

    Tobacco smoking is a major organizational, economical, and public relations-related (PR-related) problem for the company. Moreover, it is an important health determinant of the working population. The paper reports the results of the research which analyzed the current state and the tobacco control activities' transformations undertaken by Polish employers between 2003 and 2015. Data comes from the research performed in 2006, 2010 and 2015, involving random- selected representative samples of Polish enterprises, employing no fewer than 50 employees. The sampling pattern covered location and classification of activities (excluding public administration, national defense, social security, education, health care and social assistance sectors). Consecutive interviews were conducted with representatives of 611, 1002 and 1000 companies, respectively. The companies improved their compliance with the national regulations on smoking in the workplace. The strategy for limiting smoking in public places resulted in a steady increase in the number of companies (11%, 23%, 38%, respectively) that introduced smoking ban. Approximately in every second company, smoking was allowed only in the smoking room or outdoors. Voluntary activities (e.g., education and support for employees wishing to cease smoking) were very rarely undertaken by medium and large companies (several percent) and since 2010, when the law had become more restrictive, such tendency reinforced. Employers also were seldom interested in the prevalence of tobacco smoking among their personnel, its consequences for the company's functioning and the effectiveness of the implemented tobacco control measures. National anti-smoking policy caused that companies were more focused on smoking-bans at the expense of education and support for those who wanted to cease smoking. Although this contributes to reducing secondary smoking in the workplace, the companies' potential to become a major agent for tobacco control policies

  7. ‘Optimism against all odds’: Polish National Identity in War Films of Jerzy Passendorfer

    Directory of Open Access Journals (Sweden)

    Mikołaj Kunicki

    2017-12-01

    Full Text Available ‘Optimism against all odds’: Polish National Identity in War Films of Jerzy Passendorfer Using archival sources, movie reviews, secondary sources and films, this article examines the cinema of Jerzy Passendorfer, the founding father of action movies genre in People’s Poland, but also the staunch supporter of Władysław Gomułka’s ‘Polish road to Socialism’ and General Mieczysław Moczar’s ultranationalist faction of the Partisans in the Polish United Workers’ Party. It demonstrates how Passendorfer’s blend of mainstream cinema and propaganda legitimized the party state and contributed to the construction of a new ethos, identity, and politics of history that enforced historical amnesia and syncretized past and present. It also argues that Passendorfer’s promotion of nationalist and authoritarian state ideology, militaristic patriotism and Polish-Soviet alliance, commissioned by the regime, sat well with mass audiences, precisely because of the use of popular genres adopted from the West and the quench for optimistic visions of nationhood. Although Passendorfer’s patriotic actions flicks faded away with the fall of Gomułka’s regime, they constitute a model, which can be still emulated.   “Trudny optymizm”: polska tożsamość narodowa w filmach wojennych Jerzego Passendorfera Opierając się na źródłach archiwalnych, publikacjach naukowych i analizie filmów, niniejszy artykuł bada twórczość filmową Jerzego Passendorfera, ojca chrzestnego filmu akcji w PRL, zwolennika ‘polskiej drogi do socjalizmu’ Władysława Gomułki oraz sympatyka nacjonalistycznej frakcji generała Mieczysława Moczara w Polskiej Zjednoczonej Partii Robotniczej. Passendorfer łączył w swoich filmach popularne kino gatunkowe z propagandową legitymizacją władzy partii. Współtworzył nowy etos i świadomość narodową oraz uprawiał politykę historyczną, która zsynchronizowała przeszłość z tera

  8. Translating Scientific Judgment, Technological Insight and Economic Theory Into Practical Policy Lessons: The Case of Climate Regulation in the United States

    Science.gov (United States)

    Mignone, B. K.

    2008-12-01

    Effective solutions to the climate change problem will require unprecedented cooperation across space, continuity across time and coordination between disciplines. One well-known methodology for synthesizing the lessons of physical science, energy engineering and economics is integrated assessment. Typically, integrated assessment models use scientific and technological relationships as physical constraints in a larger macroeconomic optimization that is designed to either balance the costs and benefits of climate change mitigation or find the least-cost path to an exogenously prescribed endpoint (e.g. atmospheric CO2 stabilization). The usefulness of these models depends to a large extent on the quality of the assumptions and the relevance of the outcome metrics chosen by the user. In this study, I show how a scientifically-based emissions reduction scenario can be combined with engineering-based assumptions about the energy system (e.g. estimates of the marginal cost premium of carbon-free technology) to yield insights about the price path of CO2 under a future regulatory regime. I then show how this outcome metric (carbon price) relates to key decisions about the design of a future cap-and-trade system and the way in which future carbon markets may be regulated.

  9. THE LOW PRICE EFFECT ON THE POLISH MARKET

    Directory of Open Access Journals (Sweden)

    Adam Zaremba

    2014-06-01

    Full Text Available In this paper we investigate the characteristics of the low price anomaly, which implies higher returns to stocks with a low nominal price. The research aims to broaden academic knowledge in a few ways. Firstly, we deliver some fresh evidence on the low price effect from the Polish market. Secondly, we analyze the interdependence between the low price effect and other return factors: value, size and liquidity. Thirdly, we investigate whether the low price effect is present after accounting for liquidity. Fourthly, we check to see whether the low price effect is robust to transaction costs. The paper is composed of three main sections. In the beginning, we review the existing literature. Next, we present the data sources and research methods employed. Finally, we discuss our research findings. Our computations are based on all the stocks listed on the Warsaw Stock Exchange (WSE in the years 2003-2013. We have concluded that the low price effect is present on the Polish market, although the statistical significance is very weak and it disappears entirely after accounting for transaction costs and liquidity.

  10. Influence of Polish Arms, Armour and Militaria on Western Europe

    Directory of Open Access Journals (Sweden)

    Lenkiewicz, Z. S.

    1980-12-01

    Full Text Available Up to approximately the 15th century the arms and the armament of a Polish knight were very similar in style to those used in the west: heavy Armour, heavy sword, and heavy horse. However, in the face of the continuous attacks by Tartars, and later on Turks, on Polish territories, the enemy consisting of very light cavalry, on small but very quick and manageable horses, the heavy knights were of little use. Long before the 15th century the armament and the tactics had to be slowly modified and adapted to the enemy's armament and stratagems.

    Hasta antes del siglo XV, las armas y armamento de los caballeros polacos eran muy similares en estilo a los utilizados en Occidente: una pesada armadura, una pesada espada, un pesado caballo. Sin embargo, frente a los contínuos ataques al territorio polaco, primero de los tártaros y posteriormente de los turcos, utilizando una caballería muy ligera montando caballos de pequeño tamaño pero muy rápidos y manejables, los caballeros tan pesadamente armados eran de poca utilidad. Tácticas y armamento hubieron de adaptarse a las del enemigo. [traducido por la redacción

  11. FOOD SAFETY SYSTEMS’ FUNCTIONING IN POLISH NETWORKS OF GROCERY STORES

    Directory of Open Access Journals (Sweden)

    Paweł NOWICKI

    2013-04-01

    Full Text Available This article shows the way how the food safety systems are functioning in Polish networks of grocery stores. The study was conducted in the fourth quarter of 2012 in the south‐eastern Poland. There were chosen three organizations that meet certain conditions: medium size Polish grocery network without participation of foreign capital and up to 30 retail locations within the group. Studies based on a case study model. The research found that regular and unannounced inspections carried out to each store's, impact on increasing safety of food offered and the verification of GHP requirements on the headquarters level has a significant impact on the safety of food offered as well as on the knowledge and behavior of employees. In addition it was found that the verification and analysis of food safety management system is an effective tool for improving food safety. It was also shown that in most cases there is no formal crisis management system for the food protection in the surveyed companies and employees are only informed of what to do in case of an emergency.

  12. Calibration of a Credit Rating Scale for Polish Companies

    Directory of Open Access Journals (Sweden)

    Aleksandra Wójcicka

    2012-01-01

    Full Text Available Increasing number of bankruptcy announcements means that even greater attention is being paid to the correct evaluation of the probability of default (PD and decisions made on the basis of it. Reliable estimation of the likelihood of a company's bankruptcy reduces risk, not only for the company itself but also for all co-operating companies and financial institutions. The financial crisis has led to a tightening up of the conditions for gaining finance from banks. However, it is not only the evaluation of PD itself that is so important but also the correct classification of companies according to their PD level ("good" or "bad" companies. There is very little consideration about possible adjustments of the credit risk scale, as usually the American scale is adopted with no changes which seems incorrect.This paper stresses the importance of correct calibration of the credit rating scale. It should not be assumed (as it was in the past that once a scale is defined it remains fixed and independent of the country. Therefore, the research carried out on Polish companies shows that the credit rating scale should be changed and the default point (i.e. "cut-off" point should be higher than in the past. The author uses a modified classification matrix based on the probability of default. The paper compares the classification of quoted Polish companies according to their credit risk level (PD with the actual occurrence of default when various default "cut-off" points are used. (original abstract

  13. Endogenous or exogenous origin of vaginal candidiasis in Polish women?

    Science.gov (United States)

    Mnichowska-Polanowskai, Magdalena; Wojciechowska-Koszko, Iwona; Klimowicz, Bogumia; Szymaniak, Ludmia; Krasnodebska-Szponder, Barbara; Szych, Zbigniew; Giedrys-Kalemba, Stefania

    2013-01-01

    Vaginal candidiasis is a common problem of clinical practice. Many studies have been conducted to explain its origin but only a few have included Polish women. The aim of the study was to determine the prevalence and similarity of oral, anal and vaginal Candida albicans strains isolated from Polish women with vaginal candidiasis. The study involved 20 from 37 recruited women. Swab samples were collected from their vagina, anus, and oral cavity at two-month intervals. All the women were treated with nystatin. Yeast were recovered and identified by the germ-tube test, API /Vitek system, typed by API ZYM and RAPD-PCR. Chi-square test was used to analyze the data. A total of 170 Candida albicans isolates were recovered from 180 samples collected 3 times from 3 sites of 20 women. Positive yeast vaginal cultures were found in all patients before administration of nystatin. Vaginal yeast recovery rate was decreased statistically significant in both follow-up visits (p= 0.001; p= 0.003). The same and different genotypes/biotypes were found concomitantly in a few body sites and/ or repeatedly at time interval from the same body site. The results support the concept of dynamic exchange of yeast within one woman and endogenous or exogenous origin of vaginal candidiasis.

  14. WHAT MOTIVATES POLISH COMMUNITY PHARMACISTS TO PURSUIT OF POSTGRADUATE EDUCATION?.

    Science.gov (United States)

    Jasinska-Stroschein, Magdalena; Kurczewska, Urszula; Orszulak-Michalak, Daria

    2017-03-01

    Due to increasing importance of the advisory role for physicians and patients played by the pharmacist over the last decade, it seems appropriate to evaluate if and why pharmacists are interested in postgraduate medical education. The purpose of the study was to develop and validate an instrument to assess such motives, with special interest to Polish community pharmacists. A self-administered questionnaire was completed by a sample of participants of community pharmacist specialization programs and it was analyzed in relation to participants of other postgraduate courses. They were asked to rank their motives on a Likert-like scale and the underlying dimensions for study motives were identified using exploratory and confirmatory techniques. The reasons for taking specialization for community pharmacists were similar as compared to participants of other postgraduate studies. However, the autotelic factor was not so strong and the crucial reason was that such postgraduate training was required to be promoted in work. Basing on Polish results, we propose the division of motives into three groups - autotelic, instrumental and coincidental. The validated self-administered questionnaire based on this division displayed acceptable construct validity and internal consistency, and therefore can be proposed as an example tool to assess the particular motives and expectations of potential postgraduate students and employees in the pharmaceutical job market. The promotion of postgraduate education among pharmacists can improve the quality of pharmaceutical service.

  15. Evaluation of Rock Bolt Support for Polish Hard Rock Mines

    Science.gov (United States)

    Skrzypkowski, Krzysztof

    2018-03-01

    The article presents different types of rock bolt support used in Polish ore mining. Individual point resin and expansion rock bolt support were characterized. The roof classes for zinc and lead and copper ore mines were presented. Furthermore, in the article laboratory tests of point resin rock bolt support in a geometric scale of 1:1 with minimal fixing length of 0.6 m were made. Static testing of point resin rock bolt support were carried out on a laboratory test facility of Department of Underground Mining which simulate mine conditions for Polish ore and hard coal mining. Laboratory tests of point resin bolts were carried out, especially for the ZGH Bolesław, zinc and lead "Olkusz - Pomorzany" mine. The primary aim of the research was to check whether at the anchoring point length of 0.6 m by means of one and a half resin cartridge, the type bolt "Olkusz - 20A" is able to overcome the load.The second purpose of the study was to obtain load - displacement characteristic with determination of the elastic and plastic range of the bolt. For the best simulation of mine conditions the station steel cylinders with an external diameter of 0.1 m and a length of 0.6 m with a core of rock from the roof of the underground excavations were used.

  16. Historical Roots of Generalized Trust in Polish Society

    Directory of Open Access Journals (Sweden)

    Borowiecki Łukasz

    2014-11-01

    Full Text Available The article analyses how historical events shape generalized trust in contemporary Polish society. The analysis consists of a set of logistic regression models. The impact of historical variables is controlled for age, sex, education and the size of the municipality. This is the first quantitative study on Poland that links historical events with the current levels of trust among Polish citizens. The common knowledge is that the Partitions of Poland had negative impact on trust. Literature on the topic hints that historical demo? graphics should play a role too. The findings suggest that Partitions had little impact with only Greater Poland and Pomerania having lower levels of generalized trust. Historical literacy rate and the presence of Ukrainian or Belarusian population are negatively associated with generalized trust while the abrupt migrations after the World War I are positively associated. The rapid character of migration is supposed to positively impact generalized trust by forcing individuals to cooperate and rely on people with whom they have no personal ties.

  17. Evaluation of landslide monitoring in the Polish Carpathians

    Science.gov (United States)

    Collins, Brian D.; Baum, Rex L.; Mrozek, Teresa; Nescieruk, Piotr; Perski, Zbigniew; Raczkowski, Wojciech; Graniczny, Marek

    2011-01-01

    In response to the June 15, 2010 request from the Polish Geological Institute (PGI) to the U.S. Geological Survey (USGS) for assistance and advice regarding real-time landslide monitoring, landslide specialists from the USGS Landslide Hazard Program visited PGI headquarters and field sites in September 2010. During our visit we became familiar with characteristics of landslides in the Polish Carpathians, reviewed PGI monitoring techniques, and assessed needs for monitoring at recently activated landslides. Visits to several landslides that are monitored by PGI (the Just, Hańczowa, Szymbark, Siercza and Łasńica landslides) revealed that current data collection (monthly GPS and inclinometer surveys, hourly piezometers readings) is generally sufficient for collecting basic information about landslide displacement, depth, and groundwater conditions. Large landslides are typically hydrologically complex, and we would expect such complexity in Carpathian landslides, given the alternating shale and sandstone stratigraphy and complex geologic structures of the flysch bedrock. Consequently groundwater observations could be improved by installing several piezometers that sample the basal shear zone of each landslide being monitored by PGI. These could be supplemented by additional piezometers at shallower depths to help clarify general flow directions and hydraulic gradients. Remedial works at Hańczowa

  18. Pertussis outbreak in Polish shooters with adverse event analysis

    Directory of Open Access Journals (Sweden)

    Monika Skrzypiec-Spring

    2017-04-01

    Full Text Available In addition to different injuries, infections are the most common reason for giving up training altogether or reducing its volume and intensity, as well as a lack of opportunities to participate in sports competitions. Nowadays, a slow but constant re‑emergence of pertussis, especially among teenagers and young adults, including athletes, can be observed. This paper describes an outbreak of pertussis among professional Polish shooters, focusing on the transmission of Bordetella pertussis infection between members of the national team, its influence on performance capacity and adverse event analysis. From 9 June, 2015 to 31 July, 2015, a total of 4 confirmed and suspected cases of pertussis were reported among members of the Polish Sport Shooting National Team, their relatives and acquaintances. Pertussis significantly decreased exercise performance of the first athlete, a 35-year-old woman, interrupted her training, and finally resulted in failure to win a medal or quota place. Pertussis also significantly decreased performance of the second athlete, a 25-year-old shooter. The other cases emerged in their families. Whooping cough is a real threat to athletes and should be prevented. Preventive measures include appropriate immunization, constant medical supervision, as well as early isolation, diagnostic tests and treatment of all infected sport team members. Regular administration of booster doses of the acellular pertussis vaccine (Tdpa every 5 years seems reasonable.

  19. Five Martyr Brothers. First Polish hermits and their worship

    Directory of Open Access Journals (Sweden)

    Kinga Blaschke

    2016-12-01

    Full Text Available Brothers Benedict and John, students of Romuald, came to Poland at the invitation of Otto III to convert pagans. Soon the Italian hermits were joined by Polish brothers Isaac and Matthew, who helped them in learning the Slavic language. The hermits, as well as Christinus, well killed in 1003 by thugs who wanted to steal money given by Duke Boleslav to an expedition to Rome, which was aimed at obtaining papal consent for conducting missionary work. Although the hermits died as victims of a robbery, killed by fellow Christians, the pope canonized them as martyrs. Their lives are relatively well-documented: the earliest and the most credible story of the five brothers by Bruno of Querfurt was written as early as five years after their death, although remained unknown until 1883. Another early account is the life of St. Romuald by Piotr Damiani of 1041. The martyrs have been also associated with yet another mysterious work – a gravestone unearthed in 1959 at the external wall of the north Roman apse of the Gniezno Cathedral, considered by most researchers the oldest epigraphic item on the Polish soil. However, the identification of the warriors mentioned in the inscription with 11th century martyrs raises many doubts. The article discusses the above matters, as well as the subject of the development of the worship of the martyr brothers.

  20. The Minister Council decree about conditions for to bring into the Polish customs area, to take away from the Polish customs area, and to transit through this area nuclear materials, radioactive sources and device including such sources

    International Nuclear Information System (INIS)

    Miller, L.

    2002-01-01

    The decree refers to conditions for to bring into the Polish customs area, to take away from the Polish customs area, and to transit through this area nuclear materials, radioactive sources and devices containing such sources

  1. Is hypochondriasis a significant problem among polish adolescents? An attempt of assessment of severe form of health anxiety in polish population

    Directory of Open Access Journals (Sweden)

    Janusz Kocjan

    2017-08-01

    [Conclusions] The study provides evidence about moderate intensification of health anxiety among polish adolescent. Health anxiety level was significantly higher among medical students versus non-medical students group.

  2. Challenges to the Croatian National Identity within the EU: the Polish perspective

    Directory of Open Access Journals (Sweden)

    Ryszard Ławniczak

    2013-06-01

    Full Text Available The aim of this paper is to share the experience of a post-socialist country and a member of the EU since 1 May 2004 and the problem of preserving its own national identity, while also trying to promote it. The author first examines the definition of the concept and the relevance of the Nation’s Brand Identity Model with respect to Croatia. Next, he addresses the issue of how to preserve national identity facing “the winds” of unequal competition from more developed EU member countries as well as other global players – mainly United States. (perhaps even more dangerous. The issue of media ownership plays an extremely important role. Based on the evidence from the Polish experience, the author developed a new concept of “the reed effect.” In the final section of the article, he recommends public diplomacy as the potentially most efficient tool for building relations and promoting national identity. Finally, he concludes the study with a rather optimistic observation that external threats tend to strengthen national identity, yet the process is time-consuming. In the case of Poland, the appeals for “economic patriotism”, defending the purity of the Polish language, slogans like “buy Polish” and “proud to be Polish” did not emerge until 6-8 years after accession to the European Union and about 18-20 years after the beginning of the country’s economic and political transformation. This phenomenon can be observed after the first waves of enthusiasm for the “western/individualistic” value system, consumer goods, junk food, films, foreign direct investment and media “freedom”.

  3. The experience and awareness of laparoendoscopic procedures among Polish surgeons in everyday clinical practice.

    Science.gov (United States)

    Mitura, Kryspin; Dąbrowiecki, Stanisław; Śmietański, Maciej; Matyja, Andrzej

    2017-01-01

    In 2012, a total of 56 647 inguinal hernia repairs were performed in Poland. However, the absence of a uniform hernia repair register obscures the current herniology status in Poland, especially regarding laparoendoscopic procedures. To determine the awareness of laparoendoscopic procedures among Polish surgeons and to ascertain their everyday clinical practice. The data were collected at the national hernia conference in 2016, during an interactive session for surgeons with a special interest in herniology. They could respond to the survey items using the VoxVote application. All items and response options were displayed on participants' smartphones. The questions were related to transabdominal preperitoneal/totally extraperitoneal (TAPP/TEP) hernia repair. The surgeons responded to 27 questions regarding routine inguinal hernia repair. One hundred and six surgeons from all regions of Poland participated in the survey. 19.2% of respondents never inform patients about the possibility of performing laparoendoscopic repair. 45.2% admitted that they had referred a patient with a difficult inguinal hernia to another hospital or surgeon. Seventy-five percent stated they would be willing to perform TAPP/TEP if the reimbursement rates were more favourable. In bilateral hernias, 61.6% of the respondents perform a two-step open repair, while only 25% perform a single-stage laparoendoscopic repair of bilateral hernia. In women, only 13.3% perform laparoendoscopic hernia repairs, and 19.0% do not use mesh. The skill level to perform TAPP/TEP repair is still inadequate among Polish surgeons. The absence of accurate data makes it impossible to verify whether the treatment methods used are compliant with the guidelines.

  4. Effect of Polish and foreign purebred Arabian stallions on conformation traits of their progeny participating in shows in the last decade

    Directory of Open Access Journals (Sweden)

    Rafal Czarnecki

    2014-12-01

    Full Text Available Observations confirm correctness of the statement that the best recommendation for a stallion is his progeny. The aim of this study was indicating purebred Arabian stallions passing on to their progeny best conformation traits, assessed in Polish shows, in the past decade, taking into consideration their origin. The analysis included national and foreign stallions used in Polish breeding of purebred Arabian horses, which are fathers of at least 5 heads of progeny. The authors own research proved that progeny of foreign stallions statistically differed significantly from the progeny sired by Polish stallions within all conformation traits tested in shows. In the studied period, the highest final score (91.37 points and note for the trait type (19.11 points was characteristic of the progeny of QR Marc. The best head was passed on by stallions: QR Marc (19.06 points and WH Justice (18.78 points, born in the United States and owned by the European breeders. In the Top Ten of producers passing on a refined head to their progeny, there was only one Polish stallion bred in the Horse Stud Michalw, Ekstern (18.29 points. Progeny with the most correct body structure was sired by foreign stallions, Eden C (18.13 points and QR Marc (18.13 points, and by the Polish stallion, Zlocien (17.95 points. The highest score for the trait legs was obtained by the progeny of the Qatar stallion Gazal Al Shaqab (16.30 points. However, the title of the father of the best movers got an Israeli stallion, Laheeb (18.91 points.

  5. A novel vibration assisted polishing device based on the flexural mechanism driven by the piezoelectric actuators

    Directory of Open Access Journals (Sweden)

    Guilian Wang

    2018-01-01

    Full Text Available The vibration assisted polishing has widely application fields because of higher machining frequency and better polishing quality, especially the polishing with the non-resonant mode that is regarded as a kind of promising polishing method. This paper reports a novel vibration assisted polishing device, consisting of the flexible hinge mechanism driven by the piezoelectric actuators, which is suitable for polishing planes or curve surfaces with slow curvature. Firstly, the generation methods of vibration trajectory are investigated for the same frequency and different frequency signals’ inputs, respectively, and then the types of elliptic and Lissajous’s vibration trajectories are generated respectively. Secondly, a flexural mechanism consisting of the right circular flexible hinges and the leaf springs is developed to produce two-dimensional vibration trajectory. Statics and dynamics investigating of this flexible mechanism are finished in detail. The analytical models about input and output compliances of the flexural mechanism are established according to the matrix-based compliance modeling, and the dynamic model of the flexural mechanism based on the Euler-Lagrange equation is also presented. The finite element model of the flexural mechanism was established to carry out the numerical simulation in order to testify the rationality of device design. Finally, the polishing experiment is carried out to prove the effectiveness of the vibration device. The experimental results show that this novel vibration assisted polishing device developed in this study can remove more effectively the cutting marks left by last process and obviously reduce the workpiece surface roughness.

  6. The beginnings of the reception of Ludwik Fleck’s ideas in Polish (1936-1989

    Directory of Open Access Journals (Sweden)

    Paweł Jarnicki

    2016-12-01

    Full Text Available The article discusses the beginnings of the reception of Ludwik Fleck’s theory of thought styles and thought collectives in Polish, from his first polemics with Izydora Dąmbska in 1936 to the first edition of the Polish translation of Entstehung und Entwicklung

  7. Are Polish Primary School Pupils in Favor of Wearing Uniforms? Snapshot Comment

    Science.gov (United States)

    Asotska, Julia; Butler, Norman L.; Davidson, Barry S.; Griffith, Kimberly Grantham; Brown, Veda E.; Kritsonis, Wiilliam Allan

    2007-01-01

    The purpose of this article is to discuss whether Polish primary school pupils want to wear uniforms, and it is motivated by the Polish government's recently proposed policy: Zero Tolerance for Violence at School. Seventy one pupils, who attend Podstawowka Nr30 school in Cracow, were surveyed, and the authors found that most pupils are not in…

  8. Mathematical modelling of a self-polishing antifouling paint exposed to seawater: A parameter study

    DEFF Research Database (Denmark)

    Kiil, Søren; Pedersen, M. S.; Dam-Johansen, Kim

    2002-01-01

    , and to suggest ways of controlling biocide release rates. A case study with an antifouling paint based on the well-known tributyltin self-polishing copolymer system showed that the rate of paint polishing was influenced, to various degrees, by the following parameters: seawater pH and concentration of Na...

  9. The effect of European integration on exchange rate dependence: the Polish accession to the EU

    NARCIS (Netherlands)

    Thiel, J.H.; van Giersbergen, N.P.A.

    2010-01-01

    This paper investigates the effect of the Polish accession to the European Union (EU) on the dependence between the euro-US dollar and Polish zloty-US dollar exchange rate. The dependence is estimated by means of copulas as suggested by Patton (2006). This approach allows to first specify and

  10. Effect of One-Step and Multi-Steps Polishing System on Enamel Roughness

    Directory of Open Access Journals (Sweden)

    Cynthia Sumali

    2013-07-01

    Full Text Available Normal 0 false false false MicrosoftInternetExplorer4 The final procedures of orthodontic treatment are bracket debonding and cleaning the remaining adhesive. Multi-step polishing system is the most common method used. The disadvantage of that system is long working time, because of the stages that should be done. Therefore, dental material manufacturer make an improvement to the system, to reduce several stages into one stage only. This new system is known as one-step polishing system. Objective: To compare the effect of one-step and multi-step polishing system on enamel roughness after orthodontic bracket debonding. Methods: Randomized control trial was conducted included twenty-eight maxillary premolar randomized into two polishing system; one-step OptraPol (Ivoclar, Vivadent and multi-step AstroPol (Ivoclar, Vivadent. After bracket debonding, the remaining adhesive on each group was cleaned by subjective polishing system for ninety seconds using low speed handpiece. The enamel roughness was subjected to profilometer, registering two roughness parameters (Ra, Rz. Independent t-test was used to analyze the mean score of enamel roughness in each group. Results: There was no significant difference of enamel roughness between one-step and multi-step polishing system (p>0.005. Conclusion: One-step polishing system can produce a similar enamel roughness to multi-step polishing system after bracket debonding and adhesive cleaning.DOI: 10.14693/jdi.v19i3.136

  11. Microstructure of pulsed-laser deposited PZT on polished and annealed MGO substrates

    NARCIS (Netherlands)

    King, S.L.; Coccia, L.G.; Gardeniers, Johannes G.E.; Boyd, I.W.

    1996-01-01

    Thin films of Lead-Zirconate-Titanate (PZT) have been grown by pulsed-laser-deposition (PLD) onto polished MgO substrates both with and without pre-annealing. The surface morphology of polished MgO substrates, which are widely used for deposition, is examined by AFM. Commercially available,

  12. Word Boundaries in L2 Speech: Evidence from Polish Learners of English

    Science.gov (United States)

    Schwartz, Geoffrey

    2016-01-01

    Acoustic and perceptual studies investgate B2-level Polish learners' acquisition of second language (L2) English word-boundaries involving word-initial vowels. In production, participants were less likely to produce glottalization of phrase-medial initial vowels in L2 English than in first language (L1) Polish. Perception studies employing word…

  13. 'Polished' cinema : Over de receptie van het werk van Andrzej Kondratiuk in Polen en het groteske

    NARCIS (Netherlands)

    Gusc, I.

    2012-01-01

    Despite being brutally slated at times, Andrzej Kondratiuk’s films were also often admired and praised by Polish film critics. Their inability to uniformly categorise and value Kondratiuk’s highly unconventional work has led to him being set aside, and labelled as, a ‘separate’ filmmaker in Polish

  14. Development of a multisensory arm for process monitoring in Robot Assisted Polishing

    DEFF Research Database (Denmark)

    Pilny, Lukas; Dalla Costa, Giuseppe; Bissacco, Giuliano

    2015-01-01

    A multisensory polishing arm with integrated three component force sensor, a miniature acoustic emission (AE) sensor and an accelerometer was developed for process monitoring in Robot Assisted Polishing (RAP) process. The arm design was optimized for integration of a force and an AE sensor. The f...

  15. OSSM2008 Polish Moessbauer Community Meeting: Program, Abstracts and List of Participants

    International Nuclear Information System (INIS)

    2008-01-01

    The Polish Moessbauer Community Meeting - OSSM2008 has been organized by Polish scientists using the Moessbauer spectroscopy in their research. Main subjects of the meeting are investigations of modern materials electronic structure by means of Moessbauer effect (ME), using ME in biological test of tissue diseases and ME investigation of physical properties of different steels

  16. Holocaust Education in Polish Public Schools: Between Remembrance and Civic Education

    Science.gov (United States)

    Milerski, Boguslaw

    2010-01-01

    This article analyzes the historical and political context of Holocaust education, and its implementation in Polish schools. Perceptions of the Holocaust continue to change, influenced by Poland's social and political situation. The Polish historical context is quite specific; it includes the long history of Poles and Jews as neighbors, with local…

  17. Effect finishing and polishing procedures on the surface roughness of IPS Empress 2 ceramic.

    Science.gov (United States)

    Boaventura, Juliana Maria Capelozza; Nishida, Rodrigo; Elossais, André Afif; Lima, Darlon Martins; Reis, José Mauricio Santos Nunes; Campos, Edson Alves; de Andrade, Marcelo Ferrarezi

    2013-01-01

    To evaluate the surface roughness of IPS Empress 2 ceramic when treated with different finishing/polishing protocols. Sixteen specimens of IPS Empress 2 ceramic were made from wax patterns obtained using a stainless steel split mold. The specimens were glazed (Stage 0-S0, control) and divided into two groups. The specimens in Group 1 (G1) were finished/polished with a KG Sorensen diamond point (S1), followed by KG Sorensen siliconized points (S2) and final polishing with diamond polish paste (S3). In Group 2 (G2), the specimens were finished/polished using a Shofu diamond point (S1), as well as Shofu siliconized points (S2) and final polishing was performed using Porcelize paste (S3). After glazing (S0) and following each polishing procedure (S1, S2 or S3), the surface roughness was measured using TALYSURF Series 2. The average surface roughness results were analyzed using ANOVA followed by Tukey post-hoc tests (α = 0.01) RESULTS: All of the polishing procedures yielded higher surface roughness values when compared to the control group (S0). S3 yielded lower surface roughness values when compared to S1 and S2. The proposed treatments negatively affected the surface roughness of the glazed IPS Empress 2 ceramic.

  18. Polish Foreign Trade: The Quality Catch-up and the Influence of Foreign Direct Investments

    DEFF Research Database (Denmark)

    Nielsen, Jørgen Ulff-Møller

    2000-01-01

    This paper investigates how the Polish transition process has expressed itself in export and inward foreign direct investments (FDI), and the relations between export and FDI. Since 1988, the number of Polish products able to compee in export markets has steadily increased. The quality level...

  19. Efficacy of polishing kits on the surface roughness and color stability ...

    African Journals Online (AJOL)

    Objective: Different polishing kits may have different effects on the composite resin surfaces. The aim of this study was to evaluate the surface roughness and color stability of four different composites which was applied different polishing technique. Materials and Methods: Thirty specimens were made for each composite ...

  20. Wear characteristics of polished and glazed lithium disilicate ceramics opposed to three ceramic materials.

    Science.gov (United States)

    Saiki, Osamu; Koizumi, Hiroyasu; Akazawa, Nobutaka; Kodaira, Akihisa; Okamura, Kentaro; Matsumura, Hideo

    2016-01-01

    This study compared the wear characteristics of a heat-pressed lithium disilicate ceramic material opposed to feldspathic porcelain, a lithium disilicate glass ceramic, and zirconia materials. Ceramic plate specimens were prepared from feldspathic porcelain (EX-3 nA1B), lithium disilicate glass ceramics (e.max CAD MO1/C14), and zirconia (Katana KT 10) and then ground or polished. Rounded rod specimens were fabricated from heat-pressed lithium disilicate glass ceramic (e.max press LT A3) and then glazed or polished. A sliding wear testing apparatus was used for wear testing. Wear of glazed rods was greater than that of polished rods when they were abraded with ground zirconia, ground porcelain, polished porcelain, or polished lithium disilicate ceramics. For both glazed and polished rods, wear was greater when the rods were abraded with ground plates. The findings indicate that application of a polished surface rather than a glazed surface is recommended for single restorations made of heat-pressed lithium disilicate material. In addition, care must be taken when polishing opposing materials, especially those used in occlusal contact areas. (J Oral Sci 58, 117-123, 2016).

  1. Teacher Morale, Motivation and Professional Identity: Insight for Educational Policymakers from State Teachers of the Year. Teacher Researcher Policy Paper Series

    Science.gov (United States)

    Bosso, David

    2017-01-01

    Informed by a qualitative study involving 24 individuals, each of whom has been recognized as a State Teacher of the Year, this report presents an exploration of the phenomena of teacher morale, motivation and perceptions of job satisfaction as related to professional identity and professional growth in the context of educational change. The…

  2. The Impact of Resources on Education: A Position Paper on How Theories of Social Capital Provide Insight on the Achievement Gap in the United States Education System

    Science.gov (United States)

    Zeisler, Kayla

    2012-01-01

    Research has shown that there is a gap in educational achievement between socioeconomic and racial groups in the public education system in the United States. This paper identifies the link between resources and academic achievement. Through examining educational resources, from in-school factors, such as facilities and teacher quality, to…

  3. Insights into signal transduction by a hybrid FixL: Denaturation study of on and off states of a multi-domain oxygen sensor.

    Science.gov (United States)

    Guimarães, Wellinson G; Gondim, Ana C S; Costa, Pedro Mikael da Silva; Gilles-Gonzalez, Marie-Alda; Lopes, Luiz G F; Carepo, Marta S P; Sousa, Eduardo H S

    2017-07-01

    FixL from Rhizobium etli (ReFixL) is a hybrid oxygen sensor protein. Signal transduction in ReFixL is effected by a switch off of the kinase activity on binding of an oxygen molecule to ferrous heme iron in another domain. Cyanide can also inhibit the kinase activity upon binding to the heme iron in the ferric state. The unfolding by urea of the purified full-length ReFixL in both active pentacoordinate form, met-FixL(Fe III ) and inactive cyanomet-FixL (Fe III -CN - ) form was monitored by UV-visible absorption spectroscopy, circular dichroism (CD) and fluorescence spectroscopy. The CD and UV-visible absorption spectroscopy revealed two states during unfolding, whereas fluorescence spectroscopy identified a three-state unfolding mechanism. The unfolding mechanism was not altered for the active compared to the inactive state; however, differences in the ΔG H2O were observed. According to the CD results, compared to cyanomet-FixL, met-FixL was more stable towards chemical denaturation by urea (7.2 vs 4.8kJmol -1 ). By contrast, electronic spectroscopy monitoring of the Soret band showed cyanomet-FixL to be more stable than met-FixL (18.5 versus 36.2kJmol -1 ). For the three-state mechanism exhibited by fluorescence, the ΔG H2O for both denaturation steps were higher for the active-state met-FixL than for cyanomet-FixL. The overall stability of met-FixL is higher in comparison to cyanomet-FixL suggesting a more compact protein in the active form. Nonetheless, hydrogen bonding by bound cyanide in the inactive state promotes the stability of the heme domain. This work supports a model of signal transduction by FixL that is likely shared by other heme-based sensors. Copyright © 2017 Elsevier Inc. All rights reserved.

  4. Fighting alcoholism among railway workers in the light of early 20th Century Polish-language temperance publications

    Directory of Open Access Journals (Sweden)

    Izabela Krasińska

    2016-12-01

    Discussion and conclusions: The Polish-language temperance periodicals provide, among other things, valuable information referring to as yet unknown though essential problem of fighting alcoholism among railway workers in Europe, USA and the Polish territories of the Three Partitions.

  5. Patterns and expenditures of multi-morbidity in an insured working population in the United States: insights for a sustainable health care system and building healthier lives.

    Science.gov (United States)

    Greene, Robert; Dasso, Edwin; Ho, Sam; Frank, Jerry; Scandrett, Graeme; Genaidy, Ash

    2013-12-01

    The U.S. health care system is currently heading toward unsustainable health care expenditures and increased dissatisfaction with health outcomes. The objective of this population-based study is to uncover practical insights regarding patients with 1 or more chronic illnesses. A cross-sectional investigation was designed to gather data from health records drawn from diverse US geographic markets. A database of 9.74 million fully-insured, working individuals was used, together with members in the same households. Among nearly 3.43 million patients with claims, 2.22 million had chronic conditions. About 24.3% had 1 chronic condition and 40.4% had multi-morbidity. Health care expenditures for chronic conditions accounted for 92% of all costs (52% for chronic costs and 40% for nonchronic costs). Psychiatry, orthopedics-rheumatology, endocrinology, and cardiology areas accounted for two thirds of these chronic condition costs; nonchronic condition costs were dominated by otolaryngology, gastroenterology, dermatology, orthopedics-rheumatology conditions, and preventive services. About 50.1% of all households had 2 or more members with chronic conditions. In summary, multi-morbidity is prevalent not only among those older than age 65 years but also in younger and working individuals, and commonly occurs among several members of a household. The authors suggest that the disease-focused model of medicine should change to a more holistic illness-wellness model, emphasizing not only the physical but also the mental and social elements that can influence individual health. In that way the chronic care model could be broadened in context and content to improve the health of patients and households.

  6. Multi-objective optimization of circular magnetic abrasive polishing of SUS304 and Cu materials

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, NhatTan; Yin, ShaoHui; Chen, FengJun; Yin, HanFeng [Hunan University, Changsha (China); Pham, VanThoan [Hanoi University, Hanoi (Viet Nam); Tran, TrongNhan [Industrial University of Ho Chi Minh City, HCM City (Viet Nam)

    2016-06-15

    In this paper, a Multi-objective particle swarm optimization algorithm (MOPSOA) is applied to optimize surface roughness of workpiece after circular magnetic abrasive polishing. The most important parameters of polishing model, namely current, gap between pole and workpiece, spindle speed and polishing time, were considered in this approach. The objective functions of the MOPSOA depend on the quality of surface roughness of polishing materials with both simultaneous surfaces (Ra1, Ra2), which are determined by means of experimental approach with the aid of circular magnetic field. Finally, the effectiveness of the approach is compared between the optimal results with the experimental data. The results show that the new proposed polishing optimization method is more feasible.

  7. Polishing and toothbrushing alters the surface roughness and gloss of composite resins.

    Science.gov (United States)

    Kamonkhantikul, Krid; Arksornnukit, Mansuang; Takahashi, Hidekazu; Kanehira, Masafumi; Finger, Werner J

    2014-01-01

    This study aimed to investigate the surface roughness and gloss of composite resins after using two polishing systems and toothbrushing. Six composite resins (Durafill VS, Filtek Z250, Filtek Z350 XT, Kalore, Venus Diamond, and Venus Pearl) were evaluated after polishing with two polishing systems (Sof-Lex, Venus Supra) and after toothbrushing up to 40,000 cycles. Surface roughness (Ra) and gloss were determined for each composite resin group (n=6) after silicon carbide paper grinding, polishing, and toothbrushing. Two-way ANOVA indicated significant differences in both Ra and gloss between measuring stages for the composite resins tested, except Venus Pearl, which showed significant differences only in gloss. After polishing, the Filtek Z350 XT, Kalore, and Venus Diamond showed significant increases in Ra, while all composite resin groups except the Filtek Z350 XT and Durafill VS with Sof-Lex showed increases in gloss. After toothbrushing, all composite resin demonstrated increases in Ra and decreases in gloss.

  8. Polish Adult Reading Test (PART) - construction of Polish test for estimating the level of premorbid intelligence in schizophrenia.

    Science.gov (United States)

    Karakuła-Juchnowicz, Hanna; Stecka, Mariola

    2017-08-29

    In view of unavailability in Poland of the standardized methods to measure PIQ, the aim of the work was to develop a Polish test to assess the premorbid level of intelligence - PART(Polish AdultReading Test) and to measureits psychometric properties, such as validity, reliability as well as standardization in the group of schizophrenia patients. The principles of PART construction were based on the idea of popular worldwide National Adult Reading Test by Hazel Nelson. The research comprised a group of 122 subjects (65 schizophrenia patients and 57 healthy people), aged 18-60 years, matched for age and gender. PART appears to be a method with high internal consistency and reliability measured by test-retest, inter-rater reliability, and the method with acceptable diagnostic and prognostic validity. The standardized procedures of PART have been investigated and described. Considering the psychometric values of PART and a short time of its performance, the test may be a useful diagnostic instrument in the assessment of premorbid level of intelligence in a group of schizophrenic patients.

  9. POLYMORPHISM OF PROLACTIN RECEPTOR GENE (PRLR IN THE POLISH LANDRACE AND POLISH LARGE WHITE SWINE POPULATION AND REPRODUCTIVE TRAITS

    Directory of Open Access Journals (Sweden)

    AGATA ZIÓŁKOWSKA

    2011-01-01

    Full Text Available Prolactin receptor gene was found in pig chromosome 16, and it is one of the genes with a significant effect on reproduction traits in sows. The objective of the research was to determine polymorphism of the prolactin receptor gene in pigs of two maternal breeds: Polish Landrace and Polish Large White, as well as analyse relations between particular allelomorphic variants, and reproduction traits of examined sows. Two PRLR gene alleles, A and B, were isolated, they were obtained after AluI restriction gene digestion of the PCR product with the length of 163 bp; furthermore, three genotypes were identified: PRLRAA – 85, 59, 19 bp; PRLRAB – 104, 85, 59, 19 bp; PRLRBB – 104, 59 bp. We assessed 122 sows, in terms of their age at the first farrowing, as well as the sizes of the two subsequent litters. No statistically significant differences were found in the examined reproduction traits in sows with different allelomorphic relations, both within each breed and between breeds. Obtained results indicate that it is necessary to conduct further research on a larger animal group.

  10. Insight into doping efficiency of organic semiconductors from the analysis of the density of states in n-doped C60 and ZnPc

    Science.gov (United States)

    Gaul, Christopher; Hutsch, Sebastian; Schwarze, Martin; Schellhammer, Karl Sebastian; Bussolotti, Fabio; Kera, Satoshi; Cuniberti, Gianaurelio; Leo, Karl; Ortmann, Frank

    2018-05-01

    Doping plays a crucial role in semiconductor physics, with n-doping being controlled by the ionization energy of the impurity relative to the conduction band edge. In organic semiconductors, efficient doping is dominated by various effects that are currently not well understood. Here, we simulate and experimentally measure, with direct and inverse photoemission spectroscopy, the density of states and the Fermi level position of the prototypical materials C60 and zinc phthalocyanine n-doped with highly efficient benzimidazoline radicals (2-Cyc-DMBI). We study the role of doping-induced gap states, and, in particular, of the difference Δ1 between the electron affinity of the undoped material and the ionization potential of its doped counterpart. We show that this parameter is critical for the generation of free carriers and influences the conductivity of the doped films. Tuning of Δ1 may provide alternative strategies to optimize the electronic properties of organic semiconductors.

  11. Computer-Controlled Cylindrical Polishing Process for Large X-Ray Mirror Mandrels

    Science.gov (United States)

    Khan, Gufran S.; Gubarev, Mikhail; Speegle, Chet; Ramsey, Brian

    2010-01-01

    We are developing high-energy grazing incidence shell optics for hard-x-ray telescopes. The resolution of a mirror shells depends on the quality of cylindrical mandrel from which they are being replicated. Mid-spatial-frequency axial figure error is a dominant contributor in the error budget of the mandrel. This paper presents our efforts to develop a deterministic cylindrical polishing process in order to keep the mid-spatial-frequency axial figure errors to a minimum. Simulation software is developed to model the residual surface figure errors of a mandrel due to the polishing process parameters and the tools used, as well as to compute the optical performance of the optics. The study carried out using the developed software was focused on establishing a relationship between the polishing process parameters and the mid-spatial-frequency error generation. The process parameters modeled are the speeds of the lap and the mandrel, the tool s influence function, the contour path (dwell) of the tools, their shape and the distribution of the tools on the polishing lap. Using the inputs from the mathematical model, a mandrel having conical approximated Wolter-1 geometry, has been polished on a newly developed computer-controlled cylindrical polishing machine. The preliminary results of a series of polishing experiments demonstrate a qualitative agreement with the developed model. We report our first experimental results and discuss plans for further improvements in the polishing process. The ability to simulate the polishing process is critical to optimize the polishing process, improve the mandrel quality and significantly reduce the cost of mandrel production

  12. Surface changes of metal alloys and high-strength ceramics after ultrasonic scaling and intraoral polishing.

    Science.gov (United States)

    Yoon, Hyung-In; Noh, Hyo-Mi; Park, Eun-Jin

    2017-06-01

    This study was to evaluate the effect of repeated ultrasonic scaling and surface polishing with intraoral polishing kits on the surface roughness of three different restorative materials. A total of 15 identical discs were fabricated with three different materials. The ultrasonic scaling was conducted for 20 seconds on the test surfaces. Subsequently, a multi-step polishing with recommended intraoral polishing kit was performed for 30 seconds. The 3D profiler and scanning electron microscopy were used to investigate surface integrity before scaling (pristine), after scaling, and after surface polishing for each material. Non-parametric Friedman and Wilcoxon signed rank sum tests were employed to statistically evaluate surface roughness changes of the pristine, scaled, and polished specimens. The level of significance was set at 0.05. Surface roughness values before scaling (pristine), after scaling, and polishing of the metal alloys were 3.02±0.34 µm, 2.44±0.72 µm, and 3.49±0.72 µm, respectively. Surface roughness of lithium disilicate increased from 2.35±1.05 µm (pristine) to 28.54±9.64 µm (scaling), and further increased after polishing (56.66±9.12 µm, P scaling (from 1.65±0.42 µm to 101.37±18.75 µm), while its surface roughness decreased after polishing (29.57±18.86 µm, P scaling significantly changed the surface integrities of lithium disilicate and zirconia. Surface polishing with multi-step intraoral kit after repeated scaling was only effective for the zirconia, while it was not for lithium disilicate.

  13. Surface geometry of three packable and one hybrid composite after polishing.

    Science.gov (United States)

    Jung, Martin; Bruegger, Hilka; Klimek, Joachim

    2003-01-01

    This study evaluated the surface quality of four composite materials after polishing with six different polishing techniques. Eighty specimens were made using three packable composites (Definite/Degussa, SureFil/ Dentsply and Solitaire/Heraeus-Kulzer) and one hybrid composite (Herculite XRV/Kerr). Five specimens of each material were polished using flexible Sof-Lex discs. The remaining 75 specimens of each composite were prepared using three finishing protocols: a single 30 microm diamond (n = 25), two finishing diamonds (30/20 microm; n = 25) and a 30 microm diamond followed by a tungsten carbide finishing bur (n = 25). Final polishing of each of the three finishing groups was accomplished with SuperBuff, Diafix-oral, OneGloss, Astropol and HaWe Composite Polishers (n = 5, each). Surface roughness was evaluated quantitatively by laser-stylus profilometry. Average roughness (R(a)) was calculated; statistical analysis of the data was performed with two-way ANOVA and Scheffé post-hoc tests. The polished surfaces were examined qualitatively by SEM. The results showed significant effects on surface roughness from the different composites (p = 0.011) and polishing systems (p < 0.001). After polishing, the Solitaire surfaces (R(a) = 0.72 microm) were smoother than Definite (R(a) = 0.87 microm) and SureFil (R(a) = 0.89 microm) and significantly smoother than Herculite (R(a) = 0.92 microm; p = 0.011). Three of the polishing methods (SuperBuff, Diafix-oral and Astropol) achieved lower R(a)-values than Sof-Lex discs. The polishing quality of the one-step systems SuperBuff and Diafix-oral was strongly affected by the initial finishing protocol.

  14. What kind of scientometrics and bibliometrics do we need in Poland? (in Polish

    Directory of Open Access Journals (Sweden)

    Michał KOKOWSKI

    2015-12-01

    Full Text Available The aim of this research study and review article is to examine the scientific basis of scientometrics and bibliometrics, i.e. to show their real “detection and measurement” capabilities. The analysis is conducted from the author’s perspective of the integrated science of science and the history and methodology of the science of science following this perspective. Particular emphasis is placed on the history and methodology of scientometrics and bibliometrics and the history and methodology of science. This perspective is a new approach to the subject matter and determines a how to select publications and their interpretations and b which hierarchy the analyzed issues should follow. The article describes the view, dominant both in the world and in Poland, on the basics of scientometrics and bibliometrics and their numerous serious scientific restrictions, such as: a the incompatibility of the so­‑called scientometric laws and the Garfield law of concentration with the empirical data; b the domain bias, the language bias and the geographical bias of indexation databases; c various practices of scientific communication; d the local (national or state­‑level orientation of humanities, social sciences and citation indexes; e the disadvantages of the impact factor (IF, the manipulations with its values and the “impact factor game”; f  the numerous problems with and abuses of citations, e.g. the Mendel syndrome, the “classic” publication bias, the palimpsestic syndrome, the effect of the disappearance of citations, the so­‑called Matthew effect, the theft of citations, the so­‑called secondary and tertiary citations, negative citations, “fashionable nonsenses”, forced citations, the pathologies of the so­‑called citation cartels or cooperative citations, the guest authorship and the honorable authorship; g the distinction between the “impact of publication” and the “importance of publication” or the

  15. Proofs that Develop Insight

    Science.gov (United States)

    Weber, Keith

    2010-01-01

    Many mathematics educators have noted that mathematicians do not only read proofs to gain conviction but also to obtain insight. The goal of this article is to discuss what this insight is from mathematicians' perspective. Based on interviews with nine research-active mathematicians, two sources of insight are discussed. The first is reading a…

  16. [A study of different polishing techniques for amalgams and glass-cermet cement by scanning electron microscope (SEM)].

    Science.gov (United States)

    Kakaboura, A; Vougiouklakis, G; Argiri, G

    1989-01-01

    Finishing and polishing an amalgam restoration, is considered as an important and necessary step of the restorative procedure. Various polishing techniques have been recommended to success a smooth amalgam surface. The aim of this study was to investigate the influence of three different polishing treatments on the marginal integrity and surface smoothness of restorations made of three commercially available amalgams and a glass-cermet cement. The materials used were the amalgams, Amalcap (Vivadent), Dispersalloy (Johnson and Johnson), Duralloy (Degussa) and the glass-cermet Katac-Silver (ESPE). The occlusal surfaces of the restorations were polished by the methods: I) round bur, No4-rubber cup-zinc oxide paste in a small brush, II) round bur No 4-bur-brown, green and super green (Shofu) polishing cups and points successively and III) amalgam polishing bur of 12-blades-smooth amalgam polishing bur. Photographs from unpolished and polished surfaces of the restorations, were taken with scanning electron microscope, to evaluate the polishing techniques. An improvement of marginal integrity and surface smoothness of all amalgam restorations was observed after the specimens had been polished with the three techniques. Method II, included Shofu polishers, proved the best results in comparison to the methods I and III. Polishing of glass-cermet cement was impossible with the examined techniques.

  17. Ligand induced change of β2 adrenergic receptor from active to inactive conformation and its implication for the closed/open state of the water channel: insight from molecular dynamics simulation, free energy calculation and Markov state model analysis.

    Science.gov (United States)

    Bai, Qifeng; Pérez-Sánchez, Horacio; Zhang, Yang; Shao, Yonghua; Shi, Danfeng; Liu, Huanxiang; Yao, Xiaojun

    2014-08-14

    The reported crystal structures of β2 adrenergic receptor (β2AR) reveal that the open and closed states of the water channel are correlated with the inactive and active conformations of β2AR. However, more details about the process by which the water channel states are affected by the active to inactive conformational change of β2AR remain illusive. In this work, molecular dynamics simulations are performed to study the dynamical inactive and active conformational change of β2AR induced by inverse agonist ICI 118,551. Markov state model analysis and free energy calculation are employed to explore the open and close states of the water channel. The simulation results show that inverse agonist ICI 118,551 can induce water channel opening during the conformational transition of β2AR. Markov state model (MSM) analysis proves that the energy contour can be divided into seven states. States S1, S2 and S5, which represent the active conformation of β2AR, show that the water channel is in the closed state, while states S4 and S6, which correspond to the intermediate state conformation of β2AR, indicate the water channel opens gradually. State S7, which represents the inactive structure of β2AR, corresponds to the full open state of the water channel. The opening mechanism of the water channel is involved in the ligand-induced conformational change of β2AR. These results can provide useful information for understanding the opening mechanism of the water channel and will be useful for the rational design of potent inverse agonists of β2AR.

  18. 10. national conference of Maria Sklodowska-Curie Polish Radiation Research Society. Abstract of papers; 10. krajowy zjazd Polskiego Towarzystwa Badan Radiacyjnych im. Marii Sklodowskiej-Curie. Streszczenia referatow

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    The 10. national conference of M. Sklodowska-Curie Polish Radiation Research Society has given the opportunity to present novel Polish advisement in all fields of radiation research, e.g. radiation chemistry and biology, radiation processing, environmental study, mathematical modeling and simulation as well as different theoretical study. As a whole it may be treated as a review of actual state of art. The scientific progress since 1992 when the 9. national conference place up to now can be easy assessed on the base of presented material.

  19. On the relationship between rutile/anatase ratio and the nature of defect states in sub-100 nm TiO2 nanostructures: experimental insights

    KAUST Repository

    Soliman, Moamen M.

    2018-02-02

    Black TiO2 is being widely investigated due to its superior optical activity and potential applications in photocatalytic hydrogen generation. Herein, the limitations of the hydrogenation process of TiO2 nanostructures are unraveled by exploiting the fundamental tradeoffs affecting the overall efficiency of the water splitting process. To control the nature and concentration of defect states, different reduction rates are applied to sub-100 nm TiO2 nanotubes, chosen primarily for their superiority over their long counterparts. X-Ray Photoelectron Spectroscopy disclosed changes in the stoichiometry of TiO2 with the reduction rate. UV-vis and Raman spectra showed that high reduction rates promote the formation of the rutile phase in TiO2, which is inactive towards water splitting. Furthermore, electrochemical analysis revealed that such high rates induce a higher concentration of localized electronic defect states that hinder the water splitting performance. Finally, incident photon-to-current conversion efficiency (IPCE) highlighted the optimum reduction rate that attains a relatively lower defect concentration as well as lower rutile content, thereby achieving the highest conversion efficiency.

  20. Constraints on Negative Prefixation in Polish Sign Language.

    Science.gov (United States)

    Tomaszewski, Piotr

    2015-01-01

    The aim of this article is to describe a negative prefix, NEG-, in Polish Sign Language (PJM) which appears to be indigenous to the language. This is of interest given the relative rarity of prefixes in sign languages. Prefixed PJM signs were analyzed on the basis of both a corpus of texts signed by 15 deaf PJM users who are either native or near-native signers, and material including a specified range of prefixed signs as demonstrated by native signers in dictionary form (i.e. signs produced in isolation, not as part of phrases or sentences). In order to define the morphological rules behind prefixation on both the phonological and morphological levels, native PJM users were consulted for their expertise. The research results can enrich models for describing processes of grammaticalization in the context of the visual-gestural modality that forms the basis for sign language structure.

  1. Four Riders of the Apocalypse of the Polish Bureaucracy

    Directory of Open Access Journals (Sweden)

    Kieżun Witold

    2018-03-01

    Full Text Available This article was originally published in Polish as: Witold Kieżun, Czterej jeźdźcy apokalipsy polskiej biurokracji, Kultura, No. 3/630, Paris 2000. The Literary Institute (publisher of the “Kultura” monthly expressed its interest in and consent to the publication of an English-language version of this article. Professor Witold Kieżun also gave his consent to the translation of his text and its posting in the pages of the journal Foundations of Management. The text was written in 1999 and introduced subsequent to January 1 of that year, regarding the reform of the administrative division of Poland, which involved, among other things, three-stage structure of territorial division and the introduction of counties as administrative units (editorial note.

  2. Polish Accession to the European Union: Participating Institutions

    Directory of Open Access Journals (Sweden)

    Tomaszewski Waldemar

    2015-06-01

    Full Text Available In May 2014 it was aready ten years since Poland’s accession to the European Union. The accession was preceded by a long period of political action and negotiations between the Polish and the EU institutions. The process of integration was extremely complex. It covered almost all areas of economic, legal and civil aspects of the aspiring country’s economy, in which all necessary requirements had to be met. The aim of the article was to present the institutional framework created for efficient implementation of the process of accession. The considerations involved especially an institutional method. The research resulted in poining out both the actually efficient and less efficient bodies participating in the process of integration.

  3. 16th French-German-Polish Conference on Optimization

    CERN Document Server

    Korytowski, Adam; Maurer, Helmut; Szymkat, Maciej

    2016-01-01

    This book contains extended, in-depth presentations of the plenary talks from the 16th French-German-Polish Conference on Optimization, held in Kraków, Poland in 2013. Each chapter in this book exhibits a comprehensive look at new theoretical and/or application-oriented results in mathematical modeling, optimization, and optimal control. Students and researchers involved in image processing, partial differential inclusions, shape optimization, or optimal control theory and its applications to medical and rehabilitation technology, will find this book valuable. The first chapter by Martin Burger provides an overview of recent developments related to Bregman distances, which is an important tool in inverse problems and image processing. The chapter by Piotr Kalita studies the operator version of a first order in time partial differential inclusion and its time discretization. In the chapter by Günter Leugering, Jan Sokołowski and Antoni Żochowski, nonsmooth shape optimization problems for variational inequa...

  4. Uranium in the Bunter sediments of the Polish area

    International Nuclear Information System (INIS)

    Saldan, M.; Strzelecki, R.

    1980-01-01

    Uranium mineralization occurring in the Triassic sediments in the Polish area is discussed. Systematic work conducted for over ten years revealed the presence of uranium mineralization in the following geological units: Peribaltic syneclize, Fore-Sudetic monocline, Zary pericline and Pomerania trough. Out of three uranium-bearing horizons which can be correlated with each other two (the lower and the middle) are connected with the Middle Bunter, while the upper horizon is related to the Upper Bunter. Mineralization was found in sandstones, conglomerates, mudstones and claystones and, in the Fore-Sudetic monocline, also in carbonates. Among uranium minerals uranium black and coffinite were identified. In addition to uranium, increased vanadium, selenium and molybdenum contents were found in the sandstones. Some of the uranium-bearing horizons are of economic value. (author)

  5. Polish model of electric energy market-bulk energy tariff

    International Nuclear Information System (INIS)

    Malysa, H.

    1994-01-01

    The key problem of electric energy supply industry reform is gradually launching a competitive wholesale generation market since 1994. In process of this transformation the important role plays bulk energy supply tariff in electricity transactions between Polish Power Grid Company and distribution and retail supply companies (distributors). Premises, factors and constrains having influence on shaping of the bulk energy supply tariff are presented. A brief outline of economic foundation for calculation of demand charges and energy rate is given. Particular attention has been paid to description of bulk energy supply tariff structure. The scope and manner of adjustment of this tariff to circumstances and constrains in the initial stage of the wholesale electric energy market have been described as well. (author). 8 refs

  6. Old age in Polish and American tv series

    Directory of Open Access Journals (Sweden)

    JOANNA ANIOŁ

    2013-12-01

    Full Text Available The educational and socialization role of the media is not the latest novelty, however there are niches that have not been developed yet. Realizing the opinion-forming role of the mass media, which may be reflected in social behaviours, the authors of this article will analyse the content of chosen media products. The image of elderly people presented by the most popular Polish and American series will be examined. The research aims to find whether Desperate Housewives and Colours of happiness (original title: Barwy szczęścia adjust the image of old age to the social-demographic situation, which is constantly changing in the majority of countries. Does the colossus – television promote stereotypes which make age discrimination morally approved – or just the opposite – a well thought out image, shaping the recognition and respect for people in their “third age”?

  7. RESEARCH OF REFRIGERATION SYSTEMS FAILURES IN POLISH FISHING VESSELS

    Directory of Open Access Journals (Sweden)

    Waldemar KOSTRZEWA

    2013-07-01

    Full Text Available Temperature is a basic climatic parameter deciding about the quality change of fishing products. Time, after which qualitative changes of caught fish don’t exceed established, acceptable range, is above all the temperature function. Temperature reduction by refrigeration system of the cargo hold is a basic technical method, which allows extend transport time. Failures of refrigeration systems in fishing vessels have a negative impact on the environment in relation to harmful refrigerants emission. The paper presents the statistical analysis of failures occurred in the refrigeration systems of Polish fishing vessels in 2007‐2011 years. Analysis results described in the paper can be a base to draw up guidelines, both for designers as well as operators of the marine refrigeration systems.

  8. Acidizing of Zechstein Main Dolomite in the Polish lowlands

    Energy Technology Data Exchange (ETDEWEB)

    Bierdzychi, W

    1966-07-01

    The first acidizing of Zechstein Dolomite in the Polish Lowlands was carried out in 1961. In the initial stage, a tendency existed toward multistage acidizing, and preheated acidizing fluid was used. In a preliminary operation, an acid having the concentration 12-36% was used for washing out the borehole. No additives were utilized except formalin for corrosion inhibition. In order to increase the absorption capacity, hydraulic perforations were used. The composition of acidizing fluid was determined in a preliminary study for any individual reservoir. From laboratory study, it was concluded also that the required time of 3-4 hr was sufficient for the exhaustion of acid. The pre-heating of the acid at the bottom of the hole by exothermic reaction with metallic magnesium was abandoned in the later stage of operations.

  9. Strategies for sustainable development of the Polish electric power system

    International Nuclear Information System (INIS)

    Janiczek, R.

    1996-01-01

    The key features of sustainable development of the Polish electric power industry are discussed. Priorities and limitations for changes and power demand forecasts are described. Results of least-cost planning for existing power plants' modernization and generation expansion with environmental impacts are presented. The least-cost strategy is given by the optimal upgrades of older plants until year 2002 and by expansion of gas-fired units. The limited availability of gas after 2010 will lead to the construction of new coal-fired plants. For the next planning process, an integrated resource planning methodology is proposed, which includes dynamic optimization of supply and demand side options. Innovative mechanisms are shown to overcome barriers of development like long-terms contracts and decentralization of the power system planning process. (author)

  10. Grinding and polishing of conformal windows and domes

    Science.gov (United States)

    Fess, Edward; Ross, James; Matthews, Greg

    2017-05-01

    Conformal optics require special manufacturing techniques to produce them to optical tolerances. In many cases the materials used are very hard optical ceramics that present additional manufacturing challenges due to their hardness and grain structure. OptiPro has developed grinding technologies such as OptiSonic grinding, as well as sub-aperture polishing technologies like UltraForm Finishing (UFF) to manufacture these challenging components. We have also developed a custom computer aided manufacturing (CAM) software package, ProSurf, to generate the complex tool paths for both grinding and polishing processes. One of the main advantages of ProSurf over traditional CAM software packages is that it uses metrology feedback for deterministic corrections. The metrology input can be obtained from OptiPro's 5-axis UltraSurf metrology system, which is capable of measuring these complex shapes to sub-micron accuracies. Through the development of these technologies much work has been performed in creating, measuring and analyzing the alignment fiducials or datum's used to qualify the location of the optical surfaces. Understanding the sensitivity of the optical surface to any datum misalignment is critical to knowing not only where the part is in space, but how good the optical surfaces are to each other. Working with the optical designer to properly tolerance surfaces to these datums is crucial. This paper will present the technologies developed by OptiPro to manufacture conformal windows as well as information related to the optical surfaces sensitivity to datums and how accurately those datums can be measured.

  11. Book-tax conformity in Polish private companies

    Directory of Open Access Journals (Sweden)

    Anna Białek-Jaworska

    2016-12-01

    Full Text Available The purpose of this paper is to identify whether financial income differs significantly from the tax base in Poland and what determines these differences between accounting and taxable results in Polish private entities that are not listed on the stock exchange. In this paper, besides examining the level of book-tax conformity in Poland, we investigate the determinants of book-tax differences in the one-book and twobook accounting systems, with deferred income tax. We use the single factor ANOVA variance analysis, robust fixed effects estimator and the fixed effects linear model with an AR(1 disturbance estimator for panel data of 26,657 private limited liability and non-public joint-stock companies for the period of 2003–2014 (177,667 firm-year observations. The originality of this paper results from the deep quantita-tive analysis of the determinants of book-tax conformity on a novel dataset of Polish private firms. We confirm a strong significant influence of tax law on the shape of the one-book accounting system in Poland. Larger enterprises show fewer book-tax differences. Book-tax conformity is lower in private companies that incur financial losses and in private companies conducting the one-book accounting system. Family-owned companies have higher mean and median book-tax conformity than businessgroups members, due to higher demand for information from their accounts to support stewardship func-tions and to monitor the activities of the management board in the business groups.

  12. Energy Policies of IEA Countries: Poland [Polish version

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    Poland has made commendable efforts to develop a solid energy policy framework over the last years. As energy security is a high policy priority, the country is enhancing gas supply security by building an LNG terminal, expanding underground storage capacity and increasing domestic gas production. Polish plans for developing electricity and gas cross-border links will also contribute to regional security of supply. In addition, the government has announced an ambitious nuclear programme by 2030, envisaging the first unit to enter operation by 2022. Other achievements include energy intensity improvements, an increased share of renewables and a stronger focus on energy research and development (R&D). Despite these positive developments, there is room for improving Poland’s energy strategy. First, a more integrated energy and climate policy is needed to put Poland firmly on a low-carbon path while enhancing energy security. Second, energy policy could put more emphasis on promoting competition to make the energy markets more efficient. Decarbonising Poland’s power sector will be a particularly significant challenge requiring huge investments. Coal accounts for 55% of Polish primary energy supply and 92% of electricity generation, raising significant climate change and environmental challenges. To this end, Poland’s efforts to improve energy efficiency and to diversify the country’s energy mix are praiseworthy and should be pursued. The government’s attention to R&D on clean coal technologies, including carbon capture and storage (CCS) is also encouraging. The government could put more focus on the positive role that gas can play in decarbonising the electricity mix, especially if Poland’s potential resources of unconventional gas are confirmed. To tap these resources, it will be vital to put the necessary legal and regulatory framework in place. This in-depth review analyses the energy challenges facing Poland and provides sectoral critiques and

  13. Settlement Networks in Polish Spatial Development Regional Plans

    Science.gov (United States)

    Sołtys, Jacek

    2017-10-01

    In 1999, ten years after the great political changes in Poland, 16 self-governed regions (in Polish: voivodeship) were created. According to Polish law, voivodeship spatial development plans, or regional plans in short, determine basic elements of the settlement network. No detailed regulations indicate the specific elements of the settlement network or what features of these elements should be determined. For this reason, centres as elements of the settlement network are variously named in different regions and take the form of various models. The purposes of the research described in this article are: (1) recognition and systematization of settlement network models determined in regional plans; and (2) assessment of the readability of determination in planning and its usefulness in the practice of regional policy. Six models of settlement networks in regional plans have been identified and classified into types and sub-types. Names of specific levels of centres indicate that they were classified according to two criteria: (1) level of services, which concerns only 5 voivodships; and (2) importance in development, which concerns the 11 other voivodships. The hierarchical model referring to the importance of development is less understandable than the one related to services. In the text of most plans, centres of services and centres of development are treated independently from their names. In some plans the functional types of towns and cities are indicated. In some voivodships, specifications in the plan text are too general and seem to be rather useless in the practice of regional policy. The author suggests that regional plans should determine two kinds of centres: hierarchical service centres and non-hierarchical centres of development. These centres should be further distinguished according to: (1) their role in the activation of surroundings; (2) their level of development and the necessity of action for their development; and (3) the types of actions

  14. Sexual development and behaviour issues in Polish teenage magazines.

    Science.gov (United States)

    Kopacz, Marek S

    2006-12-01

    Adolescents often look to mass media for information regarding issues of sexuality. As one form of media, teenage magazines have long constituted a pervasive and effective element of adolescent media exposure. Teenage magazines discuss a number of aspects concerning adolescent sexuality. Considering their potential impact on health related behaviors, the information they provide and the message(s) they send warrant attention. The aim of this study is to perform a content analysis of sexual development and behavior information presented in Polish teenage magazines. Social Cognitive Theory was used as a theoretical basis for this analysis. The media chosen for this study were general-themed publications targeting an adolescent female audience: Bravo Girl!, Filipinka and Dziewczyna. Each entry was analyzed using a structured key. The specific categories of behavior and development used for this study are: biological information, pedagogic instruction, topics of moral-ethical concern, results of sexual activity, and interpersonal relationships. Each category was then subdivided into separate units. The findings indicate that Polish teenage magazines predominantly focus on relationships, contraception and sex education. Relationships were most often of a romantic nature and discussed sexual activity or the potential of sexual activity. Non-prescription contraceptive methods were most often discussed, with attention given to pregnancy prevention. Sex education offered detailed information on sexual practices and behaviors with much discussion on losing one's virginity. The general approach of the analyzed magazines is that adolescents currently are, or soon will be, sexually active. As a result, certain sexual behavior and development issues are discussed in great detail, while other topics are somewhat neglected. Accepting information-seeking during adolescence as commonplace, these findings suggest that teenage magazines hold the potential for influencing adolescent

  15. Dissolved air flotation of polishing wastewater from semiconductor manufacturer.

    Science.gov (United States)

    Liu, J C; Lien, C Y

    2006-01-01

    The feasibility of the dissolved air flotation (DAF) process in treating chemical mechanical polishing (CMP) wastewater was evaluated in this study. Wastewater from a local semiconductor manufacturer was sampled and characterised. Nano-sized silica (77.6 nm) with turbidity of 130 +/- 3 NTU was found in the slightly alkaline wastewater with traces of other pollutants. Experimental results indicated removal efficiency of particles, measured as suspended particle or turbidity, increased with increasing concentration of cationic collector cetyltrimethyl ammonium bromide (CTAB). When CTAB concentration was 30 mg/L, pH of 6.5 +/- 0.1 and recycle ratio of 30%, very effective removal of particles (> 98%) was observed in saturation pressure range of 4 to 6 kg/cm2, and the reaction proceeded faster under higher pressure. Similarly, the reaction was faster under the higher recycle ratio, while final removal efficiency improved slightly as the recycle ratio increased from 20 to 40%. An insignificant effect of pH on treatment efficiency was found as pH varied from 4.5 to 8.5. The presence of activator, Al3+ and Fe3+, enhanced the system performance. It is proposed that CTAB adsorbs on silica particles in polishing wastewater through electrostatic interaction and makes particles more hydrophobic. The increase in hydrophobicity results in more effective bubble-particle collisions. In addition, flocculation of silica particles through bridging effect of collector was found; it is believed that flocculation of particles also contributed to flotation. Better attachment between gas bubble and solid, higher buoyancy and higher air to solid ratio all lead to effective flotation.

  16. Adaptation and Validation of the ADOS-2, Polish Version

    Directory of Open Access Journals (Sweden)

    Izabela Chojnicka

    2017-11-01

    Full Text Available Autism Diagnostic Observation Schedule (ADOS is one of the most popular instruments used world-widely in the diagnosis of autism spectrum disorders (ASD. Unfortunately, there are only a few studies of the psychometric properties of non-English language versions of this instrument and none of the adaptation of its second edition (ADOS-2. The objective of this study was to verify the psychometric properties of the Polish version of the Autism Diagnostic Observation Schedule, Second Edition (ADOS-2-PL. The authors recruited 401 participants: 193 with ASDs (ASD group and 78 with non-spectrum disorders, plus 130 typically developing participants (control group. ADOS-2-PL was found to have high interrater reliability, internal consistency and test–retest reliability. Confirmatory factor analysis confirmed a good fit of the Polish data to the two-factor model of ADOS-2. As no significant differences were found between participants with childhood autism and other ASDs, only one cut-off was established for Modules 1–4. The sensitivity, specificity and positive predictive value of ADOS-2-PL are high: sensitivity was over 90% (only for the “Older with some words” algorithm in the Toddler Module the sensitivity was 71% and “Aged 5 years or older” algorithm in Module 2 sensitivity was 84%, specificity was above 80% (with the exception of the Module 4 and Module 2 “Aged 5 years or older” algorithm where it was above 70%. The results support the use of ADOS-2-PL in clinical practice and scientific research. To the best of our knowledge, there have been no reports to date about adaptations of ADOS-2 and the psychometric properties of non-English language versions. As such, this constitutes the first attempt at adapting ADOS-2, and its results could be of interest for researchers outside of Poland.

  17. What do Polish interventional cardiologists know about indications and qualification for recanalisation of chronic total coronary artery occlusions?

    Science.gov (United States)

    Bryniarski, Krzysztof L; Zabojszcz, Michał; Dębski, Grzegorz; Marchewka, Jakub; Legutko, Jacek; Jankowski, Piotr; Siudak, Zbigniew; Żmudka, Krzysztof; Dudek, Dariusz; Bryniarski, Leszek

    2015-01-01

    Chronic total occlusions (CTO) are diagnosed in about 20% of patients with significant coronary artery disease. A disproportion between the high prevalence of CTOs and low rate of invasive treatment still exists. Technical difficulties, clinical uncertainties whether patients benefit from recanalisation, and a lack of knowledge of CTO may be responsible for this fact. To assess the knowledge of coronary arteries CTO among Polish interventional cardiologists. A self-designed questionnaire was used during two major Polish invasive cardiology workshops held in 2014. The study included 113 physicians, mostly cardiologists certified as independent operators. Average self-declared efficacy of CTO recanalisation was 63.5%. Most of the respondents agreed that the operator involved in the CTO recanalisation program should perform at least 30-50 procedures per year. Only 67% stated that before CTO revascularisation the evaluation of myocardial viability should be performed with dobutamine stress echocardiography as a preferred test. One third of the physicians agreed that CTO percutaneous coronary intervention (PCI) should not be performed directly after diagnostic angiography, and 51.5% believed that in patients with multi-vessel coronary artery disease PCI of CTO should be performed first. Multi-slice spiral computed tomography during the qualification and planning of the CTO revascularisation, in the opinion of 91% of the responders, should not be used before each procedure but could be useful in selected cases. Polish interventional cardiologists remains in compliance with current opinions about recanalisation of chronic coronary artery occlusions and the consensus of the EuroCTO Club, but there is still an unceasing need for further education and promotion of knowledge about CTOs.

  18. Structural elucidation of the DFG-Asp in and DFG-Asp out states of TAM kinases and insight into the selectivity of their inhibitors.

    Science.gov (United States)

    Messoussi, Abdellah; Peyronnet, Lucile; Feneyrolles, Clémence; Chevé, Gwénaël; Bougrin, Khalid; Yasri, Aziz

    2014-10-10

    Structural elucidation of the active (DFG-Asp in) and inactive (DFG-Asp out) states of the TAM family of receptor tyrosine kinases is required for future development of TAM inhibitors as drugs. Herein we report a computational study on each of the three TAM members Tyro-3, Axl and Mer. DFG-Asp in and DFG-Asp out homology models of each one were built based on the X-ray structure of c-Met kinase, an enzyme with a closely related sequence. Structural validation and in silico screening enabled identification of critical amino acids for ligand binding within the active site of each DFG-Asp in and DFG-Asp out model. The position and nature of amino acids that differ among Tyro-3, Axl and Mer, and the potential role of these residues in the design of selective TAM ligands, are discussed.

  19. Structural Elucidation of the DFG-Asp in and DFG-Asp out States of TAM Kinases and Insight into the Selectivity of Their Inhibitors

    Directory of Open Access Journals (Sweden)

    Abdellah Messoussi

    2014-10-01

    Full Text Available Structural elucidation of the active (DFG-Asp in and inactive (DFG-Asp out states of the TAM family of receptor tyrosine kinases is required for future development of TAM inhibitors as drugs. Herein we report a computational study on each of the three TAM members Tyro-3, Axl and Mer. DFG-Asp in and DFG-Asp out homology models of each one were built based on the X-ray structure of c-Met kinase, an enzyme with a closely related sequence. Structural validation and in silico screening enabled identification of critical amino acids for ligand binding within the active site of each DFG-Asp in and DFG-Asp out model. The position and nature of amino acids that differ among Tyro-3, Axl and Mer, and the potential role of these residues in the design of selective TAM ligands, are discussed.

  20. Compression-cuticle relationship of seed ferns: Insights from liquid-solid states FTIR (Late Palaeozoic-Early Mesozoic, Canada-Spain-Argentina)

    Science.gov (United States)

    Zodrow, E.L.; D'Angelo, J. A.; Mastalerz, Maria; Keefe, D.

    2009-01-01

    Cuticles have been macerated from suitably preserved compressed fossil foliage by Schulze's process for the past 150 years, whereas the physical-biochemical relationship between the "coalified layer" with preserved cuticle as a unit has hardly been investigated, although they provide complementary information. This relationship is conceptualized by an analogue model of the anatomy of an extant leaf: "vitrinite (mesophyll) + cuticle (biomacropolymer) = compression". Alkaline solutions from Schulze's process as a proxy for the vitrinite, are studied by means of liquid-solid states Fourier transform infrared spectroscopy (FTIR). In addition, cuticle-free coalified layers and fossilized cuticles of seed ferns mainly from Canada, Spain and Argentina of Late Pennsylvanian-Late Triassic age are included in the study sample. Infrared data of cuticle and alkaline solutions differ which is primarily contingent on the mesophyll +biomacropolymer characteristics. The compression records two pathways of organic matter transformation. One is the vitrinized component that reflects the diagenetic-post-diagenetic coalification history parallel with the evolution of the associated coal seam. The other is the cuticle that reflects the sum-total of evolutionary pathway of the biomacropolymer, its monomeric, or polymeric fragmentation, though factors promoting preservation include entombing clay minerals and lower pH conditions. Caution is advised when interpreting liquid-state-based FTIR data, as some IR signals may have resulted from the interaction of Schulze's process with the cuticular biochemistry. A biochemical-study course for taphonomy is suggested, as fossilized cuticles, cuticle-free coalified layers, and compressions are responses to shared physicogeochemical factors. ?? 2009 Elsevier B.V. All rights reserved.

  1. Compression-cuticle relationship of seed ferns: Insights from liquid-solid states FTIR (Late Palaeozoic-Early Mesozoic, Canada-Spain-Argentina)

    Energy Technology Data Exchange (ETDEWEB)

    Zodrow, Erwin L. [Palaeobotanical Laboratory, Cape Breton University, Sydney, Nova Scotia (Canada); D' Angelo, Jose A. [Instituto Argentino de Nivologia, Glaciologia y Ciencias Ambientales (IANIGLA), CCT-CONICET-Mendoza, Avda. Ruiz Leal s/n Parque Gral. San Martin (5500) Mendoza (Argentina); Area de Quimica, Instituto de Ciencias Basicas, Universidad Nacional de Cuyo, Centro Universitario - M5502JMA - Mendoza (Argentina); Mastalerz, Maria [Indiana Geological Survey, Indiana University, 611 North Walnut Grove, Bloomington, IN 47405-2208 (United States); Keefe, Dale [Molecular Spectroscopy Research Laboratory, Department of Chemistry, Cape Breton University, Sydney, Nova Scotia (Canada)

    2009-08-01

    Cuticles have been macerated from suitably preserved compressed fossil foliage by Schulze's process for the past 150 years, whereas the physical-biochemical relationship between the ''coalified layer'' with preserved cuticle as a unit has hardly been investigated, although they provide complementary information. This relationship is conceptualized by an analogue model of the anatomy of an extant leaf: ''vitrinite (mesophyll) + cuticle (biomacropolymer) = compression''. Alkaline solutions from Schulze's process as a proxy for the vitrinite, are studied by means of liquid-solid states Fourier transform infrared spectroscopy (FTIR). In addition, cuticle-free coalified layers and fossilized cuticles of seed ferns mainly from Canada, Spain and Argentina of Late Pennsylvanian-Late Triassic age are included in the study sample. Infrared data of cuticle and alkaline solutions differ which is primarily contingent on the mesophyll +biomacropolymer characteristics. The compression records two pathways of organic matter transformation. One is the vitrinized component that reflects the diagenetic-post-diagenetic coalification history parallel with the evolution of the associated coal seam. The other is the cuticle that reflects the sum-total of evolutionary pathway of the biomacropolymer, its monomeric, or polymeric fragmentation, though factors promoting preservation include entombing clay minerals and lower pH conditions. Caution is advised when interpreting liquid-state-based FTIR data, as some IR signals may have resulted from the interaction of Schulze's process with the cuticular biochemistry. A biochemical-study course for taphonomy is suggested, as fossilized cuticles, cuticle-free coalified layers, and compressions are responses to shared physicogeochemical factors. (author)

  2. Influence of Duroc breed inclusion into Polish Landrace maternal line on pork meat quality traits

    Directory of Open Access Journals (Sweden)

    DOMINIKA GUZEK

    2016-06-01

    Full Text Available Crossbreeding with Duroc breed allows to improve meat quality, but no data is available regarding specific influence of Duroc breed on characteristics of meat in the case of crossbreeding with various breeds. The aim of the present research was to evaluate the effect of crossbreeding Polish Landrace dames with Duroc sires on quality features of meat in reference to Polish Landrace breed. The objects of the study were Longissimus dorsi lumborum pork muscles obtained from Polish Landrace breed and Polish Landrace x Duroc crossbreed animals. Sarcomere length measurements were conducted using microscopic method and basic chemical composition measurement was analyzed using spectrophotometric scanning. Texture analysis of meat samples, performed after thermal treatment was expressed by Warner-Bratzler shear force and color analysis was obtained using CIE L*a*b* color system. No differences in sarcomere length, shear force as well as components of color values between pork meat originated from Polish Landrace breed and Polish Landrace x Duroc crossbreed were observed. Analysis of basic chemical composition revealed higher fat and lower ash contents in the case of meat of Polish Landrace breed animals. It was concluded that the actual impact of breed on meat characteristics is possibly altered by other factors. It may be suggested that influence of basic chemical composition on color of meat is breed-related.

  3. Influence of Duroc breed inclusion into Polish Landrace maternal line on pork meat quality traits.

    Science.gov (United States)

    Guzek, Dominika; Głąbska, Dominika; Głąbski, Krzysztof; Wierzbicka, Agnieszka

    2016-05-31

    Crossbreeding with Duroc breed allows to improve meat quality, but no data is available regarding specific influence of Duroc breed on characteristics of meat in the case of crossbreeding with various breeds. The aim of the present research was to evaluate the effect of crossbreeding Polish Landrace dames with Duroc sires on quality features of meat in reference to Polish Landrace breed. The objects of the study were Longissimus dorsi lumborum pork muscles obtained from Polish Landrace breed and Polish Landrace x Duroc crossbreed animals. Sarcomere length measurements were conducted using microscopic method and basic chemical composition measurement was analyzed using spectrophotometric scanning. Texture analysis of meat samples, performed after thermal treatment was expressed by Warner-Bratzler shear force and color analysis was obtained using CIE L*a*b* color system. No differences in sarcomere length, shear force as well as components of color values between pork meat originated from Polish Landrace breed and Polish Landrace x Duroc crossbreed were observed. Analysis of basic chemical composition revealed higher fat and lower ash contents in the case of meat of Polish Landrace breed animals. It was concluded that the actual impact of breed on meat characteristics is possibly altered by other factors. It may be suggested that influence of basic chemical composition on color of meat is breed-related.

  4. Process optimization for ultrasonic vibration assisted polishing of micro-structured surfaces on super hard material

    Science.gov (United States)

    Sun, Zhiyuan; Guo, Bing; Rao, Zhimin; Zhao, Qingliang

    2014-08-01

    In consideration of the excellent property of SiC, the ground micro-structured surface quality is hard to meet the requirement - consequently the ultrasonic vibration assisted polishing (UVAP) of micro-structures of molds is proposed in this paper. Through the orthogonal experiment, the parameters of UVAP of micro-structures were optimized. The experimental results show that, abrasive polishing process, the effect of the workpiece feed rate on the surface roughness (Ra), groove tip radius (R) and material removal rate (MRR) of micro-structures is significant. While, the UVAP, the most significant effect factor for Ra, R and MRR is the ultrasonic amplitude of the ultrasonic vibration. In addition, within the scope of the polishing process parameters selected by preliminary experiments, ultrasonic amplitude of 2.5μm, polishing force of 0.5N, workpiece feed rate of 5 mm·min-1, polishing wheel rotational speed of 50rpm, polishing time of 35min, abrasive size of 100nm and the polishing liquid concentration of 15% is the best technology of UVAP of micro-structures. Under the optimal parameters, the ground traces on the micro-structured surface were removed efficiently and the integrity of the edges of the micro-structure after grinding was maintained efficiently.

  5. Antecedents of Accelerated Internationalisation of Polish and Czech Small and Medium-Sized Enterprises

    Directory of Open Access Journals (Sweden)

    Izabela Kowalik

    2017-09-01

    Full Text Available Objective: The study goal was the investigation of relationships between accelerated internationalisation descriptors and antecedent firm- and entrepreneur-related factors in Polish and Czech SMEs. Research Design & Methods: In order to compare Polish and Czech companies, the data collected in two independent studies were used. The study of 233 Polish companies was conducted with the use of CATI method in 2014; 108 Czech companies were surveyed in 2013/2014 with the use of CAWI method. In both samples half of the surveyed SME-exporters were conforming to the accelerated internationalisation criteria. Findings: In both samples the “global vision” elements and company internationalisation scale and speed were interrelated. In the Polish companies this relationship was moderated by company size. There was the lack of strong positive relationships between innovativeness and internationalisation speed and scale in both samples. Implications & Recommendations:The managerial mindset has a decisive role for accelerated internationalisation in both Czech and Polish SMEs. The innovativeness of offering is not indispensable for fast foreign expansion. Larger companies may expand abroad faster if they have internationally oriented managers. Contribution & Value Added:This work addresses a research gap concerning idiosyncrasies of internationalisation antecedents in Polish and Czech enterprises. As the results show, there is no common internationalisation pattern for Polish and Czech SMEs.

  6. The effect of different polishing systems on surface roughness and gloss of various resin composites.

    Science.gov (United States)

    Da Costa, Juliana; Ferracane, Jack; Paravina, Rade D; Mazur, Rui Fernando; Roeder, Leslie

    2007-01-01

    The purpose of this in vitro study was to evaluate the surface finish and gloss of five direct resin composites polished with six polishing systems. One hundred and fifty disk-shaped composite specimens (D=10.0 mm, 2-mm-thick, N=30 per material) were made. One side of each specimen was finished with a 16-fluted carbide finishing bur and then polished. Five specimens of each resin composite were randomly assigned to one of the six polishing systems. The surface roughness and gloss were measured with a surface profilometer and a glossmeter. The results were analyzed by two-way analysis of variance and Tukey's t-test (pgloss values between the composites and the polishing systems (p gloss value was recorded for Supreme + Pogo; the lowest was recorded for Z100 + Jiffy. Pogo showed the highest gloss values for all composites. The nanofill (Supreme) and minifill (Esthet-X) composites presented a surface roughness comparable to a microfill (Durafill), independent of the polishing system used, and a gloss comparable to a microfill, when polished with a one-step system (Pogo). As compared with the multiple-step systems, the smoothest surfaces and the highest gloss values were achieved using the one-step system (Pogo) for all the evaluated composites.

  7. Profilometric analysis of two composite resins' surface repolished after tooth brush abrasion with three polishing systems.

    Science.gov (United States)

    Uppal, Mudit; Ganesh, Arathi; Balagopal, Suresh; Kaur, Gurleen

    2013-07-01

    To evaluate the effect of three polishing protocols that could be implemented at recall on the surface roughness of two direct esthetic restorative materials. Specimens (n = 40) measuring 8 mm (length) × 5 mm (width) × 4 mm (height) were fabricated in an acrylic mold using two light-cured resin-based materials (microfilled composite and microhybrid composite). After photopolymerization, all specimens were finished and polished with one of three polishing protocols (Enhance, One Gloss, and Sof-Lex polishing systems). The average surface roughness of each treated specimen was determined using 3D optical profilometer. Next all specimens were brushed 60,000 times with nylon bristles at 7200 rpm using crosshead brushing device with equal parts of toothpaste and water used as abrasive medium. The surface roughness of each specimen was measured after brushing followed by repolishing with one of three polishing protocols, and then, the final surface roughness values were determined. The data were analyzed using one-way and two-factor analysis of variance (ANOVA) and Tukey's honestly significant difference (HSD). Significant difference (P < 0.05) in surface roughness was observed. Simulated brushing following initial polishing procedure significantly roughened the surface of restorative material (P < 0.05). Polishing protocols can be used to restore a smooth surface on esthetic restorative materials following simulated tooth brushing.

  8. High voltage performance of a dc photoemission electron gun with centrifugal barrel-polished electrodes

    Science.gov (United States)

    Hernandez-Garcia, C.; Bullard, D.; Hannon, F.; Wang, Y.; Poelker, M.

    2017-09-01

    The design and fabrication of electrodes for direct current (dc) high voltage photoemission electron guns can significantly influence their performance, most notably in terms of maximum achievable bias voltage. Proper electrostatic design of the triple-point junction shield electrode minimizes the risk of electrical breakdown (arcing) along the insulator-cable plug interface, while the electrode shape is designed to maintain work, we describe a centrifugal barrel-polishing technique commonly used for polishing the interior surface of superconducting radio frequency cavities but implemented here for the first time to polish electrodes for dc high voltage photoguns. The technique reduced polishing time from weeks to hours while providing surface roughness comparable to that obtained with diamond-paste polishing and with unprecedented consistency between different electrode samples. We present electrode design considerations and high voltage conditioning results to 360 kV (˜11 MV/m), comparing barrel-polished electrode performance to that of diamond-paste polished electrodes. Tests were performed using a dc high voltage photogun with an inverted-geometry ceramic insulator design.

  9. Evaluation of one-step micro polishers for residual resin removal after debonding on fluorosed teeth

    Directory of Open Access Journals (Sweden)

    Padmalatha Challa

    2014-01-01

    Full Text Available Aim and objectives: To evaluate the effectiveness of one step micro polishers for residual resin removal on fluorosed teeth using scanning electron microscope (SEM. Methods and Material: 55 teeth with mild to moderate fluorosis were selected with five teeth as control. Metal brackets were bonded onto 50 teeth which were divided into 5 groups. The finishing and polishing methods which were tested include tungsten carbide burs (TCB, multistep finishing system (Sof-Lex, one step polishers (PoGo and combination of TCB with multistep and one step polishing systems. After resin removal, all the samples were examined under SEM for assessment of the enamel surface. Results: The enamel surface was closest to untouched enamel in samples finished with the PoGo one step polishers followed by Sof-Lex multistep finishing system. However, they took the longest time to finish. TCB required the shortest time for residual resin removal. Conclusions: All polishing systems produce a certain degree of damage to the enamel surface with the smoothest surface being produced by one step polishers on fluorosed teeth.

  10. Can the watershed non-point phosphorus pollution be interpreted by critical soil properties? A new insight of different soil P states.

    Science.gov (United States)

    Lin, Chen; Ma, Ronghua; Xiong, Junfeng

    2018-07-01

    The physicochemical properties of surface soil play a key role in the fate of watershed non-point source pollution. Special emphasis is needed to identify soil properties that are sensitive to both particulate P (PP) pollution and dissolved P (DP) pollution, which is essential for watershed environmental management. The Chaohu Lake basin, a typical eutrophic lake in China, was selected as the study site. The spatial features of the Non-point Source (NPS) PP loads and DP loads were calculated simultaneously based on the integration of sediment delivery distributed model (SEDD) and pollution loads (PLOAD) model. Then several critical physicochemical soil properties, especially various soil P compositions, were innovatively introduced to determine the response of the critical soil properties to NPS P pollution. The findings can be summarized: i) the mean PP load value of the different sub-basins was 5.87 kg, and PP pollution is regarded to be the primary NPS P pollution state, while the DP loads increased rapidly under the rapid urbanization process. ii) iron-bound phosphorus (Fe-P) and aluminum-bound phosphorus (Al-P) are the main components of available P and showed the most sensitive responses to NPS PP pollution, and the correlation coefficients were approximately 0.9. Otherwise, the residual phosphorus (Res-P) was selected as a sensitive soil P state that was significantly negatively correlated with the DP loads. iii) The DP and PP concentrations were represented differently when they were correlated with various soil properties, and the clay proportion was strongly negatively related to the PP loads. Meanwhile, there is a non-linear relationship between the DP loads and the critical soil properties, such as Fe and Total Nitrogen (TN) concentrations. Specifically, a strong inhibitory effect of TN concentration on the DP load was apparent in the Nanfei river (NF) and Paihe (PH) river basins where the R 2 reached 0.67, which contrasts with the relatively poor

  11. Can we halt health workforce deterioration in failed states? Insights from Guinea-Bissau on the nature, persistence and evolution of its HRH crisis.

    Science.gov (United States)

    Russo, Giuliano; Pavignani, Enrico; Guerreiro, Catia Sá; Neves, Clotilde

    2017-02-07

    Guinea-Bissau is one of the world's poorest and least developed countries. Amid poverty, political turmoil and state withdrawal, its health workforce (HW) has been swamped for the last four decades in a deepening crisis of under-resourcing, poor performance and laissez-faire. The present study aimed at analysing the human resources for health (HRH) situation in Guinea-Bissau in light of the recent literature on distressed health systems, with the objective of contributing to understanding the ways health workers react to protracted turmoil, the resulting distortions and the counter-measures that might be considered. Through document analysis, focus group discussions, 14 semi-structured and 5 in-depth interviews, we explored patterns as they became visible on the ground. Since independence, Guinea-Bissau experienced political events that have reflected on the healthcare arena and on the evolution of its health workforce, such as different coup attempts, waves of diaspora and shifting external assistance. The chronic scarcity of funds and a 'stable political instability' have lead to the commercialisation of public health services and to flawed mechanisms for training and deploying health personnel. In absence of any form of governance, health workers have come to own and run the health system. We show that the HRH crisis in Guinea-Bissau can only be understood by looking at its historical evolution and at the wider socio-economic context. There are no quick fixes for the deterioration of HRH in undergoverned states; however, the recognition of the ingrained distortions and an understanding of the forces determining the behaviour of key actors are essential premises for the identification of solutions. Guinea-Bissau's case study suggests that any policy that does not factor in the limited clout of health authorities over a effectively privatised healthcare arena is doomed from the start. Improving health system governance and quality of training should take

  12. Novel cavitation fluid jet polishing process based on negative pressure effects.

    Science.gov (United States)

    Chen, Fengjun; Wang, Hui; Tang, Yu; Yin, Shaohui; Huang, Shuai; Zhang, Guanghua

    2018-04-01

    Traditional abrasive fluid jet polishing (FJP) is limited by its high-pressure equipment, unstable material removal rate, and applicability to ultra-smooth surfaces because of the evident air turbulence, fluid expansion, and a large polishing spot in high-pressure FJP. This paper presents a novel cavitation fluid jet polishing (CFJP) method and process based on FJP technology. It can implement high-efficiency polishing on small-scale surfaces in a low-pressure environment. CFJP uses the purposely designed polishing equipment with a sealed chamber, which can generate a cavitation effect in negative pressure environment. Moreover, the collapse of cavitation bubbles can spray out a high-energy microjet and shock wave to enhance the material removal. Its feasibility is verified through researching the flow behavior and the cavitation results of the negative pressure cavitation machining of pure water in reversing suction flow. The mechanism is analyzed through a computational fluid dynamics simulation. Thus, its cavitation and surface removal mechanisms in the vertical CFJP and inclined CFJP are studied. A series of polishing experiments on different materials and polishing parameters are conducted to validate its polishing performance compared with FJP. The maximum removal depth increases, and surface roughness gradually decreases with increasing negative outlet pressures. The surface becomes smooth with the increase of polishing time. The experimental results confirm that the CFJP process can realize a high material removal rate and smooth surface with low energy consumption in the low-pressure environment, together with compatible surface roughness to FJP. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. On the mechanism of non-radiative decay of blue fluorescent protein chromophore: New insight from the excited-state molecular dynamics simulations and potential energy calculations

    Science.gov (United States)

    Zhao, Li; Liu, Jian-Yong; Zhou, Pan-Wang

    2017-11-01

    A detailed theoretical investigation based on the ab initio on-the-fly surface hopping dynamics simulations and potential energy surfaces calculations has been performed to unveil the mechanism of the photoinduced non-adiabatic relaxation process of the isolated blue fluorescent protein (BFP) chromophore in gas phase. The data analysis presents that the dominant reaction coordinate of the BFP chromophore is driven by a rotation motion around the CC double bridging bond, which is in remarkable difference with a previous result which supports a Hula-Twist rotation pattern. Such behavior is consistent with the double bond rotation pattern of the GFP neutral chromophore. In addition, the dynamics simulations give an estimated decay time of 1.1 ps for the S1 state, which is agrees well with the experimental values measured in proteins. The present work offers a straightforward understanding for the decay mechanism of the BFP chromophore and suggestions of the photochemical properties of analogous protein chromophores. We hope the current work would be helpful for further exploration of the BFP photochemical and photophysical properties in various environments, and can provide guidance and prediction for rational design of the fluorescent proteins catering for different demands.

  14. Karol Olszewski’s 100th anniversary of death and his contribution to cryogenics (in Polish

    Directory of Open Access Journals (Sweden)

    Alicja RAFALSKA‑ŁASOCHA

    2015-12-01

    Full Text Available The article briefly presents the scientific achievements of Karol Olszewski (1846–1915, who was born when Poland did not exist on the map of Europe and Polish science was developed mainly in Krakow, Lviv and at some European Universities. In 1883 Karol Olszewski and Zygmunt Wróblewski were the first in the world to liquefy oxygen, nitrogen and carbon oxide from the atmosphere in a stable state. In 1884 Olszewski was also the first person who liquefied hydrogen in a dynamic state, achieving a record low temperature of 225 °C (48 K. In 1895 he succeeded in liquefying argon. In January 1896 Olszewski replicated the Roentgen’s set­‑up for obtaining X­‑rays and successfully obtained this newly­‑discovered radiation for the first time in Krakow, initiating the foundation of the university’s department of radiology. Olszewski died on 25 March 1915. In March 2015 the Faculty of Chemistry of the Jagiellonian University organized a special celebration to commemorate the life and achievements of Karol Olszewski.

  15. Upgrade of pipelines operated in a Polish conditions in accordance with European Standards

    International Nuclear Information System (INIS)

    Witek, M.

    2007-01-01

    This paper presents some aspects of changing polish technical requirements concerning high pressure gas pipelines in accordance with European Norm 1594 '' Gas supply system. Pipelines with maximum operating pressure over 16 bar. Functional requirements ''. An additional class location of the steel pipelines was analyzed and supported by the results on numerous pipeline cases in Poland. Minimum distances between pipelines and buildings are given as a proposal to upgrading polish technical law in the area of the gas grid. Special attention in analysis was given to the polish existing high pressure gas network and calculation examples of existing types of steel used in pipeline construction in the past. (author)

  16. New surface modification method of bio-titanium alloy by EB polishing

    International Nuclear Information System (INIS)

    Okada, Akira; Uno, Yoshiyuki; Iio, Atsuo; Fujiwara, Kunihiko; Doi, Kenji

    2008-01-01

    A new surface modification for bio-titanium alloy products by electron beam (EB) polishing is proposed. In this EB polishing method, high energy density EB can be irradiated without concentrating the beam. Therefore, large-area EB with a maximum diameter of 60 mm can be used for instantaneously melting or evaporating metal surface. Experimental results made it clear that surface characteristics, such as repellency, corrosion resistance and coefficient of friction could be improved simultaneously with the surface smoothing in a few minutes under a proper condition. Therefore, EB polishing method has a possibility of high efficient surface smoothing and surface modification process for bio-titanium alloy. (author)

  17. Polish students at the Académie Julian until 1919

    Directory of Open Access Journals (Sweden)

    Zgórniak, Marek

    2012-08-01

    Full Text Available The subject of the article is the presence of Polish students in the most important private artistic school in Paris in the second half of the 19thcentury. The extant records regarding the atelier for male students made it possible to compile a list of about 165 Polish painters and sculptors studying there in the period from 1880 to 1919. The text presents the criteria used when preparing the list and the diagrams show the fluctuations in registration and the number of Polish artists in particular ateliers in successive years. The observations contained in the article have a summary nature and are illustrated only with selected examples.

  18. Effects of different polishing techniques on the surface roughness of dental porcelains

    Directory of Open Access Journals (Sweden)

    Işil Sarikaya

    2010-02-01

    Full Text Available OBJECTIVE: The purpose of this study was to evaluate the effects of different polishing techniques on the surface roughness of dental porcelains. MATERIAL AND METHODS: Fifty-five cylindirical specimens (15x2 mm were prepared for each feldspathic (Vita VMK 95, Ceramco III and low-fusing dental porcelain (Matchmaker. Fifty-five specimens of machinable feldspathic porcelain blocks (Vitablocs Mark II, (12x14x18 mm were cut into 2-mm-thick slices (12x14 mm with low speed saw. The prepared specimens were divided into 11 groups (n=5 representing different polishing techniques including control ((C no surface treatment, glaze (G and other 9 groups that were finished and polished with polishing discs (Sof-Lex (Sl, two porcelain polishing kits (NTI (Pk, Dialite II (Di, a diamond polishing paste (Sparkle (Sp, a zirconium silicate based cleaning and polishing prophy paste (Zircate (Zr, an aluminum oxide polishing paste (Prisma Gloss (Pg, and combinations of them. The surface roughness of all groups was measured with a profilometer. The data were analyzed with a 2-way analysis of variance, and the mean values were compared by the Tukey Honestly Significant Difference test (a=0.05. RESULTS: For all porcelain material groups, the lowest Ra values were observed in Group Gl, Group Sl, Group Pk, and Group Di, which were not significantly different from each other (p>0.05.When comparing the 4 different porcelain materials, the machinable feldspathic porcelain block group (Mark II demonstrated statistically significantly less Ra values than the other porcelain materials tested (p<0.05. No significant difference was observed between the VMK 95 and Ceramco III porcelain groups (p=0.919, also these groups demonstrated the highest Ra values. CONCLUSION: Subjected to surface roughness, the surfaces obtained with polishing and/or cleaning-prophy paste materials used alone were rougher compared to the surfaces finished using Sof-lex, Dialite, and NTI polishing kit

  19. Research on Laser Micro Polishing of SLS Technology Sintered Iron-Based Powder Surface

    Directory of Open Access Journals (Sweden)

    Gerda Vaitkūnaitė

    2015-03-01

    Full Text Available The article analyzes laser micro polishing of 1.2083 steel samples produced applying selective laser sintering (SLS method. The study has evaluated the distribution of the shape, size and temperature of the laser beam treated area in the surface layer of sintered and laser polished samples. Experimental tests have shown the impact of the technical parameters of laser micro polishing on the width and hardness of the impact zone of the treated sample. The microstructure analysis of laser treated and untreated areas of the material has been made.

  20. Interpretation of Ukrainian and Polish Adverbial Word Equivalents Form and Meaning Interaction in National Explanatory Lexicography

    Directory of Open Access Journals (Sweden)

    Alla Luchyk

    2015-06-01

    Full Text Available Interpretation of Ukrainian and Polish Adverbial Word Equivalents Form and Meaning Interaction in National Explanatory Lexicography The article proves the necessity and possibility of compiling dictionaries with intermediate existence status glossary units, to which the word equivalents belong. In order to form the Ukrainian-Polish dictionary glossary of this type the form and meaning analysis of Ukrainian and Polish word equivalents is done, the common and distinctive features of these language system elements are described, the compiling principles of such dictionary are clarified.