WorldWideScience

Sample records for polish state committee

  1. Audit Committee Practice in the Polish Listed Stock Companies. Present Situation and Development Perspectives

    Directory of Open Access Journals (Sweden)

    Piotr Szczepankowski

    2012-06-01

    Full Text Available The audit committee is one of the parts of corporate governance mechanism, which is understood as the relationship between corporate managers, directors and the providers of equity, people and institutions who save and invest their capital to earn the return. This study presents survey research results of audit committee activity in Polish public stock companies quoted on the Warsaw Stock Exchange (WSE. The purpose of this paper is to present the audit committee practice in Poland after 2009. The paper shows that the audit committee practice is still the most problematic issue of transitional Polish corporate governance rules. The survey has shown that the corporate needs and its implementation, and communication with listed companies leave a lot of room for improvement. The paper is based on the documents prepared in 2010 by PricewaterhouseCoopers, the Polish Association of Listed Companies and the Polish Institute of Directors.

  2. Archives of Voivodship Committee of Polish United Workers’ Party in Biała Podlaska

    Directory of Open Access Journals (Sweden)

    Dariusz Magier

    2010-12-01

    Full Text Available Documentation generated by the communist party after World War II constituted the part of Polish archival heritage. However, Party’s archives were not supervised by nationalarchival network. At the beginning they were storehouses of acts, and since 1955 they had been taken over by propaganda sections of voivodship committees of PZPR (Polish United Workers’ Party and later transformed into the archives of voivodship committees of the Party. The task to preserve documentation generated by the structures of the communist party in Poland was subsequently supervised by: Party HistoryInstitute at KC PZPR (Central Committee of Polish United Workers’ Party, Archives of KC PZPR, and since 1971 Central Archives of KC PZPR. Together with the archives of voivodship committees the net with its own regulations, staff and archival methodology was created. This article gives a detailed description of the activity of the organizational unit,that is the archives of the voivodship committee of the communist party. One of the smallest committees existing in Poland, a provincial Voivodship Committee of PZPR in Biała Podlaska, which operated from 1975 to 1990, serves as an example. The article discusses the reporting structure, handing-over, analysis and preservation of acts, means of recording, premises, system of training and control as well as characterizes the role of a supervisor of the Party’s voidovdship committee Archives played in the archives and chancery.

  3. Section of Cybernetics in Mining of Mining Committee of Polish Academy of Sciences - Pro Memoria

    Science.gov (United States)

    Wojaczek, Antoni; Miśkiewicz, Kazimierz

    2017-09-01

    Section of Cybernetics in Mining of Mining Committee of Polish Academy of Science (PAN) has been created by PAN Mining Committee in 1969. It was a section in Mining Committee of PAN, whose operation range included widely understood issues of automation, telecommunication and informatics in mining industry. The main operation method of the Section was to organize the periodic conferences dedicated to issues of control systems in mining. The first conference took place in 1971 in Katowice. Together with new (the current one) term of office of Mining Committee of PAN this Section ceased to exist. The paper presents (pro memoria) over 40 year long conference output of this Section that functioned within the scope of operation of Mining Committee of PAN up to 12th January 2016.

  4. Polish visit

    CERN Document Server

    2003-01-01

    On 6 October, Professor Michal Kleiber, Polish Minister of Science and Chairman of the State Committee for Scientific Research, visited CERN and met both the current and designated Director General, Luciano Maiani and Robert Aymar. Professor Kleiber visited the CMS and ATLAS detector assembly halls, the underground cavern for ATLAS, and the LHC superconducting magnet string test hall. Michal Kleiber (left), Polish minister of science and Jan Krolikowski, scientist at Warsaw University and working for CMS, who shows the prototypes of the Muon Trigger board of CMS.

  5. Polish Industry and Art at CERN

    CERN Multimedia

    2000-01-01

    On 17 October 2000 the second Polish industrial and technological exhibition opened at CERN. The first one was held five years ago and nine of the companies that were present then have come back again this year. Six of those companies were awarded contracts with CERN in 1995. Three Polish officials were present at the Opening Ceremony today: Mrs Malgorzata Kozlowska, Under-secretary of State in the State Committee for Scientific Research, Mr Henryk Ogryczak, Under-secretary of State in Ministry of Economy and Prof. Jerzy Niewodniczanski, President of National Atomic Energy Agency. Professor Luciano Maiani welcomed the Polish delegation to CERN and stressed the important contribution of Polish scientists and industrialists to the work of the laboratory. Director General Luciano Maiani (back left) and head of SPL division Karl-Heinz Kissler (back right) visit the Poland at CERN exhibition… The exhibition offers Polish companies the opportunity to establish professional contacts with CERN. Nineteen companies...

  6. Heavy metals balance in Polish and Dutch agronomy : Actual state and previsions for the future

    NARCIS (Netherlands)

    Dach, J.; Starmans, D.A.J.

    2005-01-01

    This paper presents the state of agro-ecosystem contamination with heavy metals in relation to the level of agricultural development. For this, the Polish and Dutch agricultural situations were compared. The intensive animal and vegetable production observed in the Netherlands over the past 20-30

  7. 7 CFR 718.3 - State committee responsibilities.

    Science.gov (United States)

    2010-01-01

    ... AGRICULTURE FARM MARKETING QUOTAS, ACREAGE ALLOTMENTS, AND PRODUCTION ADJUSTMENT PROVISIONS APPLICABLE TO... digital images. (b) The State committee shall submit to the Deputy Administrator requests to deviate from...

  8. 11 CFR 100.14 - State committee, subordinate committee, district, or local committee (2 U.S.C. 431(15)).

    Science.gov (United States)

    2010-01-01

    ... 11 Federal Elections 1 2010-01-01 2010-01-01 false State committee, subordinate committee, district, or local committee (2 U.S.C. 431(15)). 100.14 Section 100.14 Federal Elections FEDERAL ELECTION COMMISSION GENERAL SCOPE AND DEFINITIONS (2 U.S.C. 431) General Definitions § 100.14 State committee...

  9. Condensate polishing guidelines for PWR and BWR plants

    International Nuclear Information System (INIS)

    Robbins, P.; Crinigan, P.; Graham, B.; Kohlmann, R.; Crosby, C.; Seager, J.; Bosold, R.; Gillen, J.; Kristensen, J.; McKeen, A.; Jones, V.; Sawochka, S.; Siegwarth, D.; Keeling, D.; Polidoroff, T.; Morgan, D.; Rickertsen, D.; Dyson, A.; Mills, W.; Coleman, L.

    1993-03-01

    Under EPRI sponsorship, an industry committee, similar in form and operation to other guideline committees, was created to develop Condensate Polishing Guidelines for both PWR and BWR systems. The committee reviewed the available utility and water treatment industry experience on system design and performance and incorporated operational and state-of-the-art information into document. These guidelines help utilities to optimize present condensate polisher designs as well as be a resource for retrofits or new construction. These guidelines present information that has not previously been presented in any consensus industry document. The committee generated guidelines that cover both deep bed and powdered resin systems as an integral part of the chemistry of PWR and BWR plants. The guidelines are separated into sections that deal with the basis for condensate polishing, system design, resin design and application, data management and performance and management responsibilities

  10. Audit committees in West Indian states

    Directory of Open Access Journals (Sweden)

    Anthony R. Bowrin

    2007-01-01

    Full Text Available This study describes the regulatory framework governing audit committees (AC of publicly traded companies in the West Indies and examines the extent to which the provisions of these AC regulations are similar to the International Federation of Accountants guidelines for AC. Also, it examines the actual AC policies of publicly traded West Indian firms and determines whether they vary systematically with industry affiliation or firm size. The sample comprised companies traded on Barbados, Jamaica Stock Exchange, and Trinidad and Tobago Stock Exchanges in 2002. Larger companies and those in the financial industry provided better audit committee disclosures than their smaller counterparts and those in non-financial industries.

  11. State Technical Committee for Accounting. Official Report.

    Science.gov (United States)

    Jensen, Claudia

    This report contains validated task inventory listings for accounting occupations. An introductory report in brief outline form gives background of the work of the technical committee that identified the duties and tasks. This is followed by four attachments which make up most of the document. Attachment A has two parts: (1) an accounting skills…

  12. Polish polar research (outline

    Directory of Open Access Journals (Sweden)

    Krzysztof Ludwik Birkenmajer

    2017-12-01

    Full Text Available The article describes Polish research and discoveries in the Arctic and the Antarctic since the 19th century. The author is a geologist and since 1956 has been engaged in scientific field research on Spitsbergen, Greenland and Antarctica (23 expeditions. For many years chairman of the Committee on Polar Research of the Polish Academy of Sciences, he is now its Honorary Chairman.

  13. 75 FR 80082 - State, Local, Tribal, and Private Sector Policy Advisory Committee

    Science.gov (United States)

    2010-12-21

    ... NATIONAL ARCHIVES AND RECORDS ADMINISTRATION State, Local, Tribal, and Private Sector Policy Advisory Committee AGENCY: National Archives and Records Administration. ACTION: Notice of Establishment of... that the establishment of the State, Local, Tribal, and Private Sector Policy Advisory Committee is...

  14. Committees State Health and Facing the Phenomenon of Health Judicialization

    Directory of Open Access Journals (Sweden)

    Homero Lamarão Neto

    2016-12-01

    Full Text Available The search for consensus methods of conflict resolution is not much explored in claims involving the public sector. The State Health Committees, created by determining the CNJ, with remarkable goal of consensual resolution on public health issues, have dialogue and academic discussion of evidence-based medicine as guidelines for a bold stance on the rights assurance, innovating behavior the judiciary in coping with the legalization of health phenomenon.

  15. 34 CFR 395.14 - The State Committee of Blind Vendors.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 2 2010-07-01 2010-07-01 false The State Committee of Blind Vendors. 395.14 Section... BLIND ON FEDERAL AND OTHER PROPERTY The State Licensing Agency § 395.14 The State Committee of Blind... Blind Vendors which, to the extent possible, shall be fully representative of all blind vendors in the...

  16. 78 FR 75376 - State, Local, Tribal, and Private Sector Policy Advisory Committee (SLTP-PAC)

    Science.gov (United States)

    2013-12-11

    ...] State, Local, Tribal, and Private Sector Policy Advisory Committee (SLTP-PAC) AGENCY: National Archives... (NARA) announces a meeting of the State, Local, Tribal, and Private Sector Policy Advisory Committee... Information Program for State, Local, Tribal, and Private Sector Entities. The meeting will be open to the...

  17. Committees

    Science.gov (United States)

    2012-11-01

    Leadership Team of the IAHR Committee for Hydraulic Machinery and Systems Eduard EGUSQUIZA, UPC Barcelona, Spain, Chair François AVELLAN, EPFL-LMH, Switzerland, Past Chair Richard K FISHER, Voith Hydro Inc., USA, Past Chair Fidel ARZOLA, Edelca, Venezuela Michel COUSTON, Alstom Hydro, France Niklas DAHLBÄCKCK, Vatenfall, Sweden Normand DESY, Andritz VA TECH Hydro Ltd., Canada Chisachi KATO, University of Tokyo, Japan Andrei LIPEJ, Turboinstitut, Slovenija Torbjørn NIELSEN, NTNU, Norway Romeo SUSAN-RESIGA, 'Politehnica' University Timisoara, Romania Stefan RIEDELBAUCH, Stuggart University, Germany Albert RUPRECHT, Stuttgart University, Germany Qing-Hua SHI, Dong Fang Electrical Machinery Co., China Geraldo TIAGO, Universidade Federal de Itajubá, Brazil International Advisory Committee Shouqi YUAN (principal) Jiangsu University China QingHua SHI (principal) Dong Fang Electrical Machinery Co. China Fidel ARZOLA EDELCA Venezuela Thomas ASCHENBRENNER Voith Hydro GmbH & Co. KG Germany Anton BERGANT Litostroj Power doo Slovenia B C BHAOYAL Research & Technology Centre India Hermod BREKKE NTNU Norway Stuart COULSON Voith Hydro Inc. USA Paul COOPER Fluid Machinery Research Inc USA V A DEMIANOV Power Machines OJSC Russia Bart van ESCH Technische Universiteit Eindhoven Netherland Arno GEHRER Andritz Hydro Graz Austria Akira GOTO Ebara Corporation Japan Adiel GUINZBURG The Boeing Company USA D-H HELLMANN KSB AG Germany Ashvin HOSANGADI Combustion Research and Flow Technology USA Byung-Sun HWANG Korea Institute of Material Science Korea Toshiaki KANEMOTO Kyushu Institute of Technology Japan Mann-Eung KIM Korean Register of Shipping Korea Jiri KOUTNIK Voith Hydro GmbH & Co. KG Germany Jinkook LEE Eaton Corporation USA Young-Ho LEE Korea Maritime University Korea Woo-Seop LIM Hyosung Goodsprings Inc Korea Jun MATSUI Yokohama National University Japan Kazuyoshi Mitsubishi H I Ltd, Japan MIYAGAWA Christophe NICOLET Power Vision Engineering Srl Switzerland Maryse PAGE Hydro

  18. 76 FR 80971 - State, Local, Tribal, and Private Sector Policy Advisory Committee (SLTPS-PAC)

    Science.gov (United States)

    2011-12-27

    ..., Tribal, and Private Sector Policy Advisory Committee (SLTPS-PAC) AGENCY: National Archives and Records... made for the committee meeting of the State, Local, Tribal, and Private Sector Policy Advisory..., Local, Tribal, and Private Sector Entities. DATES: The meeting will be held on January 18, 2012, 10 a.m...

  19. 77 FR 41204 - State, Local, Tribal, and Private Sector Policy Advisory Committee (SLTPS-PAC)

    Science.gov (United States)

    2012-07-12

    ..., Tribal, and Private Sector Policy Advisory Committee (SLTPS-PAC) AGENCY: Information Security Oversight..., announcement is made for the committee meeting of the State, Local, Tribal, and Private Sector Policy Advisory..., Local, Tribal, and Private Sector Entities. DATES: The meeting will be held on July 25, 2012, 10:00 a.m...

  20. 75 FR 80082 - State, Local, Tribal, And Private Sector Policy Advisory Committee (SLTPS-PAC)

    Science.gov (United States)

    2010-12-21

    ..., Tribal, And Private Sector Policy Advisory Committee (SLTPS-PAC) AGENCY: Information Security Oversight... State, Local, Tribal, and Private Sector Policy Advisory Committee (SLTPS-PAC). The SLTPS-PAC will..., Tribal, and Private Sector Entities, as specified in Executive Order 13549 and its implementing directive...

  1. 75 FR 54299 - Agenda and Notice of Public Meeting of the Massachusetts State Advisory Committee

    Science.gov (United States)

    2010-09-07

    .... Commission on Civil Rights and the Federal Advisory Committee Act, that briefing and planning meetings of the... Advisory Committee to continue its work on English Language Learners. The purpose of the planning meeting... COMMISSION ON CIVIL RIGHTS Agenda and Notice of Public Meeting of the Massachusetts State Advisory...

  2. 78 FR 41959 - State, Local, Tribal, and Private Sector Policy Advisory Committee (SLTPS-PAC); Notice of Meeting

    Science.gov (United States)

    2013-07-12

    ...] State, Local, Tribal, and Private Sector Policy Advisory Committee (SLTPS-PAC); Notice of Meeting AGENCY... Classified National Security Information Program for State, Local, Tribal, and Private Sector Entities. FOR..., announcement is made for the following committee meeting. Name of Committee: State, Local, Tribal, and Private...

  3. United States of America Department of Energy Environmental Management Advisory Committee Public Meeting

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-01

    This reports contains documentation of presentations given at the United States of America Department of Energy Environmental Management Advisory Committee Public Meeting held December 14--15, 1993 in Alexandria, Virginia.

  4. STUDY OF THE EFFECT OF ENDFACES POLISHING ANGLE FOR ANISOTROPIC WAVEGUIDES ON STATE CONVERSION OF LIGHT POLARIZATION

    Directory of Open Access Journals (Sweden)

    V. A. Shulepov

    2016-05-01

    Full Text Available The paper deals with optical scheme for research of polarization state transformation at the junction of anisotropic waveguides. It consists of a light source, polarization controller, multifunctional integrated optical scheme (MIOS, single-mode fiber for input and output of optical radiation in MIOS and the polarization scanning Michelson interferometer. Optical radiation from the source of the plant comes through the polarization controller in one of the MIOS ports. Further, in one of the opposite ports the radiation is received by different fibers, polished at the angles of 19.5˚, 10.5˚ and 0˚. After that, the optical radiation gets into polarization Michelson interferometer. With that, the picture visibility is analyzed at different displacement of one arm upon which the value has been determined in the polarization conversion point connections. At the course of work it was obtained that the polarization state conversion at a splicing point rises with the slant angle deviation from its optimal value. Anisotropic waveguides splicing is one of the main tasks during fabrication of any fiber-optic sensor with integrated optical elements. The results of this work are of great interest for the wide range of specialists in the optical waveguides application field.

  5. Heritage of Stanisław Ostrowski - the only one medical doctor who became state Polish President - Patriae Semper Fidelis.

    Science.gov (United States)

    Woltanowska, Martyna; Woltanowski, Piotr; Wincewicz, Andrzej; Woltanowska, Magdalena

    2018-01-01

    Our purpose was to write a biography of Stanisław Ostrowski that would address in the first place the medical aspect of his professional life, with a comprehensive approach of others fields of his activity. We essentially grounded the paper on primary resources that were papers authored by Ostrowski including his scientific publications, memories, speeches as well as contemporaneous official documents that referred to Ostrowski. Second resources were also used to double check some data from primary resources and to place the biography of Stanisław Ostrowski in a proper background with special care to social, professional and political context. In this study, second resources comprised papers, that were prepared after the death of Stanisław Ostrowski. Stanisław Ostrowski, MD was a meticulous military medical doctor with an academic engagement at the King John Casimir University of Lvov. In addition, he was an excellent organizer, who soon got involved in politics to serve the local community with essential projects in public health particularly anti-tuberculosis campaigns in Lvov district. His quiet and proficient nature made him an ideal statesman with incredible skills to reconcile social, national and political enemies. Ostrowski was elected a member of parliament three times. He also held the position of President of the city of Lvov until World War Two. During the war, he was imprisoned and deported to Siberia, Soviet Union, in years 1939-1941. Subsequently he fought against Nazi Germans in the Polish II Corps. Ostrowski survived the war providing medical service in the various military units. Afterwards, he ran his medical practice in the UK. Stanisław Ostrowski was the only dermatologist who became a state president. He held an office of state president of the Polish Republic on exile in London. His life is not a simple story, but a great lesson that provides clear guidelines how to find a stable ground for lifetime being a medical doctor in the

  6. Radon in the air in the Millenium of the Polish State Underground Tourist Route in Klodzko (Lower Silesia, PL)

    International Nuclear Information System (INIS)

    Przylibski, T.A.

    1998-01-01

    The paper presents results of measurements of average monthly radon concentrations in drifts of the Millenium of the Polish State Underground Tourist Route in Klodzko. The studies revealed no significant seasonal fluctuations of radon concentration. Constant influx of radon from the geological basement, and most of all from loess-like loams and rhyolite inliers, is compensated by a natural ventilation system. Only in the summer periods of elevated radon concentrations in the air of the drifts and chambers of the Route can occur. In individual sections it is possible to measure occasional higher radon concentrations caused by local air flow fluctuations in the drifts. The highest concentrations were measured in places with the poorest ventilation - blind drifts ventilated only by backward currents. The average radon concentrations measured do not exceed concentrations allowed in apartment buildings. Therefore, in the Route there is no risk of exposure to excessive amounts of radon for personnel and tourists. The results obtained in the Route's drifts may be compared with minimum results expected in basements of houses in the Old Town in Klodzko. The paper stresses also a role of natural ventilation in protection of underground constructions and apartment buildings against high radon concentrations in areas of its elevated emanations from the geological basement. (author)

  7. 76 FR 41826 - State, Local, Tribal, and Private Sector Policy Advisory Committee (SLTPS-PAC)

    Science.gov (United States)

    2011-07-15

    ... NATIONAL ARCHIVES AND RECORDS ADMINISTRATION Information Security Oversight Office State, Local, Tribal, and Private Sector Policy Advisory Committee (SLTPS-PAC) AGENCY: National Archives and Records... Information Program for State, Local, Tribal, and Private Sector Entities. DATES: The meeting will be held on...

  8. 76 FR 22160 - Advisory Committee on the Secretary of State's Strategic Dialogue With Civil Society; Notice of...

    Science.gov (United States)

    2011-04-20

    ... representatives who are leaders of U.S. and foreign civil society and U.S. and foreign businesses engaged with... DEPARTMENT OF STATE [Public Notice 7397] Advisory Committee on the Secretary of State's Strategic... establishment of the Advisory Committee on the Secretary of State's Strategic Dialogue with Civil Society...

  9. 78 FR 26100 - Advisory Committee on the Secretary of State's Strategic Dialogue With Civil Society; Notice of...

    Science.gov (United States)

    2013-05-03

    ... businesses engaged with civil society. They may include: leaders of independent public policy advocacy... DEPARTMENT OF STATE [Public Notice 8312] Advisory Committee on the Secretary of State's Strategic... of the Advisory Committee on the Secretary of State's Strategic Dialogue with Civil Society...

  10. Cooperation of technical support organizations of state nuclear regulatory committee of Ukraine in sip safety regulation

    International Nuclear Information System (INIS)

    Bikov, V.O.; Kyilochits'ka, T.P.; Bogorins'kij, P.; Vasil'chenko, V.M.; Kondrat'jev, S.M.; Smishlyajeva, S.P.; Troter, D.

    2002-01-01

    The main task of the technical support in the Shelter Implementation Plan (SIP) licensing process consists in Technical Evaluation of SIP projects and documents submitted by the Licensee to State Nuclear Regulatory Committee to substantiate the safety of Shelter-related work. The goal of this task is to evaluate the submitted materials whether they meet the requirements of nuclear and radiation safety

  11. 75 FR 47302 - Notice of FERC Attendance at the Entergy Regional State Committee Meeting, Entergy ICT...

    Science.gov (United States)

    2010-08-05

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Notice of FERC Attendance at the Entergy Regional State Committee Meeting, Entergy ICT Tranmission Planning Summit and Entergy SPP RTO Planning... Orleans, 500 Canal Street, New Orleans, LA 70130, 504-525-2500. Entergy ICT Transmission Planning Summit...

  12. 78 FR 53424 - Agenda and Notice of Public Meeting of the New Jersey State Advisory Committee

    Science.gov (United States)

    2013-08-29

    ... an orientation meeting and planning meeting of the New Jersey State Advisory Committee to the... convene at 10:00 a.m. (ET) on Monday, September 23, 2013. The purpose of the orientation meeting is to... services should contact the Eastern Regional Office at least ten (10) working days before the scheduled...

  13. 78 FR 53424 - Agenda and Notice of Public Meeting of the West Virginia State Advisory Committee

    Science.gov (United States)

    2013-08-29

    ... an orientation meeting and planning meeting of the West Virginia State Advisory Committee to the... Time) on Tuesday, September 17, 2013. The purpose of the orientation meeting is to inform the newly... accessibility services should contact the Eastern Regional Office at least ten (10) working days before the...

  14. The state and the defence committees in the Ghanaian revolution, 1981-1984

    NARCIS (Netherlands)

    Konings, P.J.J.; Hesseling, G.S.C.M.; Binsbergen, van W.M.J.; Reyntjens, F.

    1986-01-01

    In an attempt to overcome some of the shortcomings of the theory of the postcolonial state, this study analyses the relationship between the 'revolutionary' leadership in Ghana and the 'revolutionary' mass organizations established by the new regime, the Defence Committees. The contradictions

  15. 11 CFR 100.84 - Office building for State, local, or district party committees or organizations.

    Science.gov (United States)

    2010-01-01

    ... 11 Federal Elections 1 2010-01-01 2010-01-01 false Office building for State, local, or district party committees or organizations. 100.84 Section 100.84 Federal Elections FEDERAL ELECTION COMMISSION GENERAL SCOPE AND DEFINITIONS (2 U.S.C. 431) Exceptions to Contributions § 100.84 Office building for...

  16. 11 CFR 100.144 - Office building for State, local, or district party committees or organizations.

    Science.gov (United States)

    2010-01-01

    ... 11 Federal Elections 1 2010-01-01 2010-01-01 false Office building for State, local, or district party committees or organizations. 100.144 Section 100.144 Federal Elections FEDERAL ELECTION COMMISSION GENERAL SCOPE AND DEFINITIONS (2 U.S.C. 431) Exceptions to Expenditures § 100.144 Office building for...

  17. 75 FR 65460 - Renewal of Department of Defense Federal Advisory Committee; United States Military Academy Board...

    Science.gov (United States)

    2010-10-25

    ... the United States Military Academy Board of Visitors (hereafter referred to as the ``Board''). FOR FURTHER INFORMATION CONTACT: Jim Freeman, Deputy Committee Management Officer for the Department of... on matters relating to the U.S. Military Academy, including the following: morale and discipline...

  18. Polish-Bulgarian-Russian, Bulgarian-Polish-Russian or Russian-Bulgarian-Polish dictionary?

    Directory of Open Access Journals (Sweden)

    Violetta Koseska-Toszewa

    2015-11-01

    Full Text Available Polish-Bulgarian-Russian, Bulgarian-Polish-Russian or Russian-Bulgarian-Polish dictionary? The trilingual dictionary (M. Duszkin, V. Koseska, J. Satoła and A. Tzoneva is being elaborated based on a working Polish-Bulgarian-Russian electronic parallel corpus authored by Maksim Duszkin, Violetta Koseska-Toszewa and Joanna Satoła-Staśkowiak, and works by A. Tzoneva. It is the first corpus comparing languages belonging to three different Slavic language groups: western, southern and eastern. Works on the dictionary are based on Gramatyka konfrontatywna bułgarsko-polska (Bulgarian-Polish confrontative grammar and the proposed there semantic-oriented interlanguage. Two types of classifiers have been introduced into the dictionary: classic and semantic. The trilingual dictionary will present a consistent and homogeneous set of facts of grammar and semantics. The Authors point out that in a traditional dictionary it is not clear for example whether aspect should be understood as imperfective / perfective form of a verb or as its meaning. Therefore in the dictionary forms and meaning are separated in a regular way. Imperfective verb form has two meanings: state and configuration of states and events culminating in state. Also perfective verb form has two meanings: event and configuration of states and events culminating in event. These meanings are described by the semantic classifiers, respectively, state and event, state1 and event1. The way of describing language units, mentioned in the article, gives a possibility to present language material (Polish, Bulgarian, Russian in any required order, hence the article’s title.

  19. Functional Median Polish

    KAUST Repository

    Sun, Ying; Genton, Marc G.

    2012-01-01

    polish is demonstrated by comparing its performance with the traditional functional ANOVA fitted by means under different outlier models in simulation studies. The functional median polish is illustrated on various applications in climate science

  20. Annual report for the steering committee of the association Euratom-Belgian State for fusion 1996

    International Nuclear Information System (INIS)

    Moons, F.; Bogaerts, W.; Decreton, M.; Biver, E.; Coenen, S.; Benoit, Ph.; Coheur, L.; Deboodt, P.; Andreev, D.

    1996-09-01

    This report is prepared for the annual steering committee meting of the Association Euratom - Belgian State for Fusion. The period October 1995 to September 1996 is reported on.The fusion technology work performed at the Belgian Nuclear Research Centre SCK/CEN, the Department of Metallurgy and Materials Engineering of the Louvain University (Belgium) and S.A. Gradel, a Luxemburg company, is described

  1. Annual report for the steering committee of the association Euratom-Belgian State for fusion 1996

    Energy Technology Data Exchange (ETDEWEB)

    Moons, F.; Bogaerts, W.; Decreton, M.; Biver, E.; Coenen, S.; Benoit, Ph.; Coheur, L.; Deboodt, P.; Andreev, D.

    1996-09-01

    This report is prepared for the annual steering committee meting of the Association Euratom - Belgian State for Fusion. The period October 1995 to September 1996 is reported on.The fusion technology work performed at the Belgian Nuclear Research Centre SCK/CEN, the Department of Metallurgy and Materials Engineering of the Louvain University (Belgium) and S.A. Gradel, a Luxemburg company, is described.

  2. Cancer morbidity among polishers.

    Science.gov (United States)

    Järvholm, B; Thiringer, G; Axelson, O

    1982-01-01

    The mortality pattern among 86 men was determined to investigate the possible hazards of polishing steel. The men had polished steel with polishing paste for at least five years. The polishing pastes had contained tallow, beeswax, carnauba wax, alundum, carborundum, ferric oxide, and chalk. A total of 18 men had died compared with 13.3 expected. Four had died of stomach cancer compared with 0.44 expected (p less than 0.005). The mortality for other causes of death was not increased. The study does not permit any definite conclusion but indicates a possible cancer hazard among polishers. PMID:7066237

  3. Modeling surface topography of state-of-the-art x-ray mirrors as a result of stochastic polishing process: recent developments

    Science.gov (United States)

    Yashchuk, Valeriy V.; Centers, Gary; Tyurin, Yuri N.; Tyurina, Anastasia

    2016-09-01

    Recently, an original method for the statistical modeling of surface topography of state-of-the-art mirrors for usage in xray optical systems at light source facilities and for astronomical telescopes [Opt. Eng. 51(4), 046501, 2012; ibid. 53(8), 084102 (2014); and ibid. 55(7), 074106 (2016)] has been developed. In modeling, the mirror surface topography is considered to be a result of a stationary uniform stochastic polishing process and the best fit time-invariant linear filter (TILF) that optimally parameterizes, with limited number of parameters, the polishing process is determined. The TILF model allows the surface slope profile of an optic with a newly desired specification to be reliably forecast before fabrication. With the forecast data, representative numerical evaluations of expected performance of the prospective mirrors in optical systems under development become possible [Opt. Eng., 54(2), 025108 (2015)]. Here, we suggest and demonstrate an analytical approach for accounting the imperfections of the used metrology instruments, which are described by the instrumental point spread function, in the TILF modeling. The efficacy of the approach is demonstrated with numerical simulations for correction of measurements performed with an autocollimator based surface slope profiler. Besides solving this major metrological problem, the results of the present work open an avenue for developing analytical and computational tools for stitching data in the statistical domain, obtained using multiple metrology instruments measuring significantly different bandwidths of spatial wavelengths.

  4. 19th Polish Control Conference

    CERN Document Server

    Kacprzyk, Janusz; Oprzędkiewicz, Krzysztof; Skruch, Paweł

    2017-01-01

    This volume contains the proceedings of the KKA 2017 – the 19th Polish Control Conference, organized by the Department of Automatics and Biomedical Engineering, AGH University of Science and Technology in Kraków, Poland on June 18–21, 2017, under the auspices of the Committee on Automatic Control and Robotics of the Polish Academy of Sciences, and the Commission for Engineering Sciences of the Polish Academy of Arts and Sciences. Part 1 deals with general issues of modeling and control, notably flow modeling and control, sliding mode, predictive, dual, etc. control. In turn, Part 2 focuses on optimization, estimation and prediction for control. Part 3 is concerned with autonomous vehicles, while Part 4 addresses applications. Part 5 discusses computer methods in control, and Part 6 examines fractional order calculus in the modeling and control of dynamic systems. Part 7 focuses on modern robotics. Part 8 deals with modeling and identification, while Part 9 deals with problems related to security, fault ...

  5. Political Participation of Mexican Americans in California. A Report of the California State Advisory Committee to the United States Commission on Civil Rights.

    Science.gov (United States)

    California State Advisory Committee to the United States Commission on Civil Rights.

    The California State Advisory Committee to the U.S. Commission on Civil Rights met on January 21-22, 1971, to discuss the political participation of Mexican Americans. This paper presents the committee's discussion and recommendations. Matters that are pertinent to the participation of Mexican Americans in the Political life of California are…

  6. [An international medical expert committee's participation in uncovering the truth on the liquidation of Polish officers found in mass graves at Katyn in the spring of 1943 and the biography of a Danish participant, Helge Tramsen (1910-1979)].

    Science.gov (United States)

    Rosdahl, Nils

    2008-01-01

    The article is based on a paper read as a invited speaker at a conference, entitled "Medical experts and expertise in cases of humanitarian crises "convened by the University of Geneva and the Committee of the International Red Cross in April 2007. The article starts with an overview of Polish history from the end of World War I up to the disclosure of the mass graves in the spring of 1943, but is otherwise a translation of the original English lecture with some additions from new findings.in archives. Helge tramsen was born into a bourgois family in Copenhagen. After graduation in medicine from the University of Copenhegen in 1936 he married a British woman and joined the naval medical corps and also embarked on a surgical career.. From 1940 to 1943 he was prosector at the Institute of Forensic Medicine at the University of Copenhagen. After the finding of the mass graves at Katyn, Germany requested from a number of European countries under German control forensic experts to join an international commission to investigate the findings. As the professor of forensic medicine declined perobably due to health reasons Tramsen was sent. During the German occupation of Denmark 1940 to 1945 Tramsen according to family tradition participated in the resistance movement and he consulted with members of the more conservative part of it and was recommended to go to Germany with an added purpose of being able to transport material out of Germany. He went with special plane from Copenhagen to Berlin, where he joined the international group, which later flew to Smolensk via Warszawa. He conducted a post mortem on the body of a Polish officer, selected by himself. Following that he attended in the discussion on the final report, which later in Berlin was handed over to the German minister of health, and which later formed an important part of the official German material accusing the USSR for the killing. During his stay in Berlin he claimed to have collected material, which in

  7. Crimean Khanate, Polish-Lithuanian Commonwealth and Russian State in 1524–1571: The Diplomatic Correspondence from the Archive of the Grand Duchy of Lithuania

    Directory of Open Access Journals (Sweden)

    Erusalimskiy K.Yu.

    2017-12-01

    Full Text Available The manuscript of the Czartoryskis’ Library in Krakow № 2893 contains, among other sources, the correspondence of the Crimean-Kazan Gireys with the kings of Polish Crown and Grand Duchy of Lithuania in Ruthenian translation (“prosta mowa”. The collection of letters springs from the Radziwills’ archive and can be dated back to 1524–1571 based on the reasons outlined in this article. The manuscript from the Warsaw Main Archive of the Ancient Acts (Radziwills coll., part II, № 3294 contains a part of the same correspondence, which is present in the Czartoryski manuscript № 2893. The author reinterprets the historical context of the Warsaw manuscript. The senders of the letters are Sahib-Giray (to Sigismund I, 1st: ca. 1521–1524, 2nd: June–July 1530, 3rd: September–October 1537, Safa-Giray (two letters to Sigismund I, spring or summer of 1524, Amin-Giray-Saltan (a letter to Sigismund I, September–October 1537 and Poland’s King Sigismund I the Old (to Khan Sahib-Giray at end of December 1537 or the beginning of January 1538. The latest-dated part of the Polish-Lithuanian and Crimean-Kazan correspondence in the Czartoryski manuscript contains the materials of Devlet-Giray’s diplomatic correspondence with Sigismund II Augustus, which sheds a new light on the Crimean march against the Muscovite state in 1571. These materials are contextualized and studied with respect to the new information they may provide on the history of Russian-Crimean relations (letter to Sigismund II ca. April 5, 1571 and Ardy-Berdey’s embassy ca. July 5, 1571. The author found a list of 27 towns devastated by the khan during the war against Moscow recorded in the embassy accounts of the Polish Royal Treasury at the Warsaw Archive. It was composed as a means of propaganda, but it reflects the marching route of the Crimean troops to Moscow and the ravaging of other Russian districts after Moscow had been burned on May 24, 1574.

  8. State safety oversight program : audit of the tri-state oversight committee and the Washington metropolitan area transit authority, final audit report, March 4, 2010.

    Science.gov (United States)

    2010-03-04

    The Federal Transit Administration (FTA) conducted an on-site audit of the safety program implemented by the Washington Metropolitan Area Transit Authority (WMATA) and overseen by the Tri-State Oversight Committee (TOC) between December 14 and 17, 20...

  9. 75 FR 504 - U.S. Department of State Advisory Committee on Private International Law: Organization of...

    Science.gov (United States)

    2010-01-05

    ... on consumer rights as part of its program on private international law. Three proposals have been put... DEPARTMENT OF STATE [Public Notice 6255] U.S. Department of State Advisory Committee on Private International Law: Organization of American States (OAS) Specialized Conference on Private International Law...

  10. Annual report for the steering committee of the association Euratom-Belgian State for fusion 1998

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, M

    1998-10-01

    This report is prepared for the annual steering committee meting of the Association Euratom - Belgian State in the area of fusion reactor technology. The Belgian contribution focuses on the assessment of the first wall and blanket materials under radiation and coolant interaction and on developments for the remote handling in maintenance activities. The period October 1997 to September 1998 is reported on.The fusion technology work performed at the Belgian Nuclear Research Centre SCK/CEN, the Department of Metallurgy and Materials Engineering of the Louvain University (Belgium) and S.A. Gradel, a Luxemburg-based organisation, is described.

  11. Annual report for the steering committee of the association Euratom-Belgian State for fusion 1999

    Energy Technology Data Exchange (ETDEWEB)

    Decreton, M

    1999-10-01

    This report is prepared for the annual steering committee meting of the Association Euratom - Belgian State in the area of fusion reactor technology. The Belgian contribution focuses on the assessment of the first wall and blanket materials under radiation and coolant interaction and on developments for the remote handling in maintenance activities. The period October 1998 to September 1999 is reported on.The fusion technology work performed at the Belgian Nuclear Research Centre SCK/CEN, the Department of Metallurgy and Materials Engineering of the Louvain University (Belgium) and S.A. Gradel, a Luxemburg-based organisation, is described.

  12. Annual report for the steering committee of the association Euratom-Belgian State for fusion 1999

    International Nuclear Information System (INIS)

    Decreton, M.

    1999-10-01

    This report is prepared for the annual steering committee meting of the Association Euratom - Belgian State in the area of fusion reactor technology. The Belgian contribution focuses on the assessment of the first wall and blanket materials under radiation and coolant interaction and on developments for the remote handling in maintenance activities. The period October 1998 to September 1999 is reported on.The fusion technology work performed at the Belgian Nuclear Research Centre SCK/CEN, the Department of Metallurgy and Materials Engineering of the Louvain University (Belgium) and S.A. Gradel, a Luxemburg-based organisation, is described

  13. Annual report for the steering committee of the association Euratom-Belgian State for fusion 1998

    International Nuclear Information System (INIS)

    Decreton, M.

    1998-10-01

    This report is prepared for the annual steering committee meting of the Association Euratom - Belgian State in the area of fusion reactor technology. The Belgian contribution focuses on the assessment of the first wall and blanket materials under radiation and coolant interaction and on developments for the remote handling in maintenance activities. The period October 1997 to September 1998 is reported on.The fusion technology work performed at the Belgian Nuclear Research Centre SCK/CEN, the Department of Metallurgy and Materials Engineering of the Louvain University (Belgium) and S.A. Gradel, a Luxemburg-based organisation, is described

  14. Health Information in Polish (polski)

    Science.gov (United States)

    ... Tools You Are Here: Home → Multiple Languages → Polish (polski) URL of this page: https://medlineplus.gov/languages/polish.html Health Information in Polish (polski) To use the sharing features on this page, ...

  15. Solid State Sciences Committee (SSSC). Technical progress report, May 1, 1992--April 30, 1993

    International Nuclear Information System (INIS)

    Taylor, R.

    1995-01-01

    The Solid State Sciences Committee (SSSC) of the National Research Council (NRC) is charged with monitoring the health of the field of materials science in the United States. Accordingly, the Committee identifies and examines both broad and specific issues affecting the field. Regular meetings, teleconferences, briefings from agencies and the scientific community, the formation of study panels to prepare reports, and special forums are among the mechanisms used by the SSSC to meet its charge. This progress report presents a review of SSSC activities from May 1, 1992 through April 30, 1993. The details of prior activities are discussed in earlier reports. During the above period, the SSSC has continued to track and participate, when requested, in the development of a Federal initiative on advanced materials and processing. Specifically, the SSSC is presently planning the 1993 SSSC Forum (to be cosponsored with the National Materials Advisory Board (NMAB) and the Washington Materials Forum (WMF)). The thrust will be to highlight the Federal Advanced Materials and Processing Program (AMPP). In keeping with its charge to identify and highlight specific areas for scientific and technological opportunities, the SSSC continued to oversee the conduct of a study on biomolecular materials. Preliminary plans also were developed for a study on neutron science, however, further activity is pending. A proposed study on ultrasmall devices has been expanded and absorbed into a broader context; the BPA, with SSSC participation, is preparing to hold a program initiation meeting to evaluate the need for a study on information technology and hardware

  16. Technical progress report to the Department of Energy on the Solid State Sciences Committee (SSSC)

    International Nuclear Information System (INIS)

    1995-01-01

    The Solid State Sciences Committee (SSSC) of the National Research Council (NRC) is charged with monitoring the health of the field of materials science in the United States. Accordingly, the Committee identifies and examines both broad and specific issues affecting the field. Regular meetings, teleconferences, briefings from agencies and the scientific community, the formation of study panels to prepare reports, and special forums are among the mechanisms used by the SSSC to meet its charge. This progress report presents a review of SSSC activities from May 1, 1992 through April 30, 1993. The details of prior activities are discussed in earlier reports. During the above period, the SSSC has continued to track and participate, when requested, in the development of a Federal initiative on advanced materials and processing. Specifically, the SSSC is presently planning the 1993 SSSC Forum (to be cosponsored with the National Materials Advisory Board (NMAB) and the Washington Materials Forum (WNM)). The thrust will be to highlight the Federal Advanced Materials and Processing Program (AMPP). In keeping with its charge to identify and highlight specific areas for scientific and technological opportunities, the SSSC continued to oversee the conduct of a study on biomolecular materials. Preliminary plans also have been developed for studies on neutron scattering science, on ultrasmall devices, and on molecular routes to materials

  17. Polish Cartographical Review

    Directory of Open Access Journals (Sweden)

    Nedjeljko Frančula

    2017-07-01

    Full Text Available The Polish Cartographical Review (PCR journal has been published in English four times a year since 2015. The journal is in open access and it is published by De Gruyter Open. It is edited by Polish scientists in collaboration with international experts.

  18. Steady state operation of tokamaks. Proceedings of a technical committee meeting

    International Nuclear Information System (INIS)

    2000-10-01

    The first IAEA Technical Committee Meeting (TCM) on Steady State Operation of Tokamaks was organized to discuss the operations of present long-pulse tokamaks (TRIAM-1M, TORE SUPRA, MT-7, HT-7M, HL-1M) and the plans for future steady-state tokamaks such as SST-1, CIEL, and HT-7U. This meeting, held from 13-15 October 1998, was hosted by the Academia Sinica Institute of Plasma Physics (ASIPP), Hefei, China. Participants from China, France, India, Japan, the Russian Federation, and the IAEA participated in the meeting. There were 18 individual presentations plus general discussions on many topics, including superconducting magnet systems, cryogenics, plasma position control, non-inductive current drive, auxiliary heating, plasma-wall interactions, high heat flux components, particle control, and data acquisition

  19. Desegregation of Public Schools. Testimony before the Subcommittee on Separation of Powers, Committee on the Judiciary, United States Senate.

    Science.gov (United States)

    Reynolds, William Bradford

    This testimony was delivered by William Bradford Reynolds, the Assistant Attorney General of the Civil Rights Division, before the Subcommttee on Separation of Powers, Committee on the Judiciary of the United States Senate. Reynold states that compulsory busing of students is not an acceptable remedy to achieve racial balance. He emphasizes the…

  20. 75 FR 32834 - U.S. Department of State Advisory Committee on Private International Law Study Group Notice of...

    Science.gov (United States)

    2010-06-09

    ... DEPARTMENT OF STATE [Public Notice 7041] U.S. Department of State Advisory Committee on Private International Law Study Group Notice of Meeting on the United Nations Commission on International Trade Law (UNCITRAL) Draft Legislative Guide on Secured Transactions and Its Treatment of Security Rights in...

  1. 75 FR 65461 - Renewal of Department of Defense Federal Advisory Committee; United States Naval Academy Board of...

    Science.gov (United States)

    2010-10-25

    ... the United States Naval Academy Board of Visitors (hereafter referred to as the ``Board''). FOR FURTHER INFORMATION CONTACT: Jim Freeman, Deputy Committee Management Officer for the Department of... equipment, fiscal affairs, academic methods and other matters relating to the United States Naval Academy...

  2. [The role of bioethics committees in the systems protecting scientific biomedical research participants in France and in Poland].

    Science.gov (United States)

    Czarkowski, Marek; Sieczych, Alicja

    2013-08-01

    Bioethics committees are along with ethic regulations and rules of law one of three main pillars in the system of protection of scientific biomedical research participants. Although principal directives for bioethics committees are established by international guidelines, detailed regulations may differ in particular states. The aim of this article was to compare two bioethic committees systems: French and Polish one. Historical beginnings of the bioethics committees system in France and in Poland are briefly mentioned, Subsequently, the networks of bioethics committees in both countries are compared. Although the number of bioethics committees (Research Ethic Committees) in both countries is comparable, the procedure of their establishment varies. French committees are based on administrative division of the country and divide on regional and interregional committees. In Poland, bioethics committees are established by medical universities, medical research and development units or regional chambers of physicians and dentists. In France there is no equivalent of Appeal Bioethics Committee, however one could appeal from the negative bioethics committee's opinion. The composition of French bioethics committees is more diverse and half of the members are not related to medical professions. Members of French committees are named on indefinite term by headmaster of Regional Health Agency after having been chosen in competition for the post. In Poland members are called on three-year-term but the rotation of members is not overwhelming since there is no limit of terms for one member. French legal solutions seems more secure for scientific bioethics research participants. For this reason, a detailed research on legislation in other countries is necessary before introducing any new regulations in Polish law.

  3. Regional State Committees Can Help Provide a Regional Perspective to Planning and Siting Decisions, Reducing the Need for Federal Preemption

    Energy Technology Data Exchange (ETDEWEB)

    Basheda, Gregory

    2006-03-01

    The Energy Policy Act of 2005 gave FERC the authority to preempt state and local transmission siting authorities under certain conditions, creating the potential for federal/state disputes. Such disputes are less likely to occur where there are open, regional planning processes. Multi-state advisory bodies known as regional state committees, working with RTOs, can provide a forum to evaluate transmission needs from a regional perspective, reducing the need for FERC involvement. (author)

  4. Stating the Case for Nursing Research Ethics Committees: A Discussion Paper.

    Science.gov (United States)

    Mitchell, Theresa; Fletcher, Ian

    1998-01-01

    Nurse-led research ethics committees are generally more tolerant of diversity in research proposals than are medical committees steeped in empirical traditions. However, national trends in nursing in Britain may influence a preference for multidisciplinary over nurse-led committees. (SK)

  5. A committee report on the state-of-art of uranium isotope enrichment measurement techniques

    International Nuclear Information System (INIS)

    1982-06-01

    The activity of a sectional meeting (June, 1979 - February, 1982) for uranium enrichment measurement under the Committee on Analytical Chemistry of Nuclear Fuels and Reactor Materials is summarized. In the first part of this report, the object and present state of the measurement at the following organization are described; two development organizations (Power Reactor and Nuclear Fuel Development Corporation and Japan Nuclear Fuel Development), two nuclear fuel makers (Japan Nuclear Fuel and Mitsubishi Nuclear Fuel), one safeguards inspection organization (Nuclear Material Control Center) and one research organization (Japan Atomic Energy Research Institute). The second part contains the principle and technique of several measurement methods for uranium isotopic assay, such as mass spectrometry, passive and active assays and optical spectral method. Lastly, the concept of the reference materials and its practical information for mass spectrometry and non-destructive assay are described. (author)

  6. 77 FR 62596 - Interim Guidance on State Freight Plans and State Freight Advisory Committees

    Science.gov (United States)

    2012-10-15

    ... consideration of innovative technologies and operational strategies, including intelligent transportation... State that are significant for energy development, mining, agriculture, and timber production, and the... and Innovative Technology Administration (RITA), St. Lawrence Seaway Development Corporation (SLSDC...

  7. 23 February 2010 - Polish Under Secretary of State, Ministry of Science and Higher Education, J. Szwed visiting CERN installations with sLHC Project Office T. Kurtyka and Machine Protection and Electrical Integrity Group Leader A. Siemko.

    CERN Multimedia

    Michel Blanc

    2010-01-01

    Tirage 1002023-01: In LHCb experimental area with Machine Protection and Electrical Integrity Group Leader A. Siemko; Mission Counselor M. Cichucka; Counselor to the Minister M. Klimkiewicz, Under Secretary of State J. Szwed; LHCb Collaboration, national group leader, Henryk Niewodniczanski Institut of Nuclear Physics G. Polok, Collaboration Spokesperson A. Golutvin and Delegate to CERN Council A. Zalewska. Tirage 28: Visiting the Computing Centre with IT Department Head F. Hemmer Tirage 49: In CMS Control centre, buiding 354 with Collaboration Spokesperson G. Tonelli and CMS Collaboration, national group leader, University of Warsaw J. Krolikowski. Tirage 62: visiting ALICE exhibition area and counting room with Collaboration Spokesperson J. Schukraft. Tirage 82-99: Under Secretary of State address to the Polish Community Tirage 82: Machine Protection and Electrical Integrity Group Leader A. Siemko Tirage 83: Polish Delegate to CERN Council A. Zalewska. Tirage 85: Directorate Office E. Rondio Tirage 86: ATLA...

  8. Polishing of silicon based advanced ceramics

    Science.gov (United States)

    Klocke, Fritz; Dambon, Olaf; Zunke, Richard; Waechter, D.

    2009-05-01

    Silicon based advanced ceramics show advantages in comparison to other materials due to their extreme hardness, wear and creep resistance, low density and low coefficient of thermal expansion. As a matter of course, machining requires high efforts. In order to reach demanded low roughness for optical or tribological applications a defect free surface is indispensable. In this paper, polishing of silicon nitride and silicon carbide is investigated. The objective is to elaborate scientific understanding of the process interactions. Based on this knowledge, the optimization of removal rate, surface quality and form accuracy can be realized. For this purpose, fundamental investigations of polishing silicon based ceramics are undertaken and evaluated. Former scientific publications discuss removal mechanisms and wear behavior, but the scientific insight is mainly based on investigations in grinding and lapping. The removal mechanisms in polishing are not fully understood due to complexity of interactions. The role of, e.g., process parameters, slurry and abrasives, and their influence on the output parameters is still uncertain. Extensive technological investigations demonstrate the influence of the polishing system and the machining parameters on the stability and the reproducibility. It is shown that the interactions between the advanced ceramics and the polishing systems is of great relevance. Depending on the kind of slurry and polishing agent the material removal mechanisms differ. The observed effects can be explained by dominating mechanical or chemo-mechanical removal mechanisms. Therefore, hypotheses to state adequate explanations are presented and validated by advanced metrology devices, such as SEM, AFM and TEM.

  9. 77 FR 530 - Department of State Advisory Committee on Private International Law: Notice of Renewal of Charter

    Science.gov (United States)

    2012-01-05

    ... transactions; online dispute resolution; international leasing and franchising; and other topics of current... International Law: Notice of Renewal of Charter The Charter of the Department of State's Advisory Committee on Private International Law has been renewed, effective for a two-year period. Pursuant to the Federal...

  10. 77 FR 52784 - U.S. Department of State Advisory Committee on Private International Law: Notice of Annual Meeting

    Science.gov (United States)

    2012-08-30

    ... Choice of Court Agreements; international contract law; developments in major PIL organizations... International Law: Notice of Annual Meeting The Department of State's Advisory Committee on Private International Law (ACPIL) will hold its annual meeting on developments in private international law on Thursday...

  11. 78 FR 1851 - New England States Committee on Electricity v. ISO New England Inc.; Notice of Complaint

    Science.gov (United States)

    2013-01-09

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. EL13-34-000] New England States Committee on Electricity v. ISO New England Inc.; Notice of Complaint Take notice that on December... (Complainant) filed a formal complaint against ISO New England Inc. (Respondent) alleging that the Respondent's...

  12. 75 FR 9414 - Notice of Open Meeting of the Advisory Committee of the Export-Import Bank of the United States...

    Science.gov (United States)

    2010-03-02

    ... EXPORT-IMPORT BANK OF THE UNITED STATES Notice of Open Meeting of the Advisory Committee of the Export- Import Bank of the United States (Ex-Im Bank) SUMMARY: The Advisory Committee was established by Public Law 98-181, November 30, 1983, to advise the Export-Import Bank on its programs and to provide...

  13. 75 FR 73082 - Notice of Open Meeting of the Advisory Committee of the Export-Import Bank of the United States...

    Science.gov (United States)

    2010-11-29

    ... EXPORT-IMPORT BANK OF THE UNITED STATES Notice of Open Meeting of the Advisory Committee of the Export- Import Bank of the United States (Ex-Im Bank) SUMMARY: The Advisory Committee was established by Public Law 98-181, November 30, 1983, to advise the Export-Import Bank on its programs and to provide...

  14. 75 FR 54875 - Notice of Open Meeting of the Advisory Committee of the Export-Import Bank of the United States...

    Science.gov (United States)

    2010-09-09

    ... EXPORT-IMPORT BANK OF THE UNITED STATES Notice of Open Meeting of the Advisory Committee of the Export- Import Bank of the United States (Ex-Im Bank) SUMMARY: The Advisory Committee was established by Public Law 98-181, November 30, 1983, to advise the Export-Import Bank on its programs and to provide...

  15. Technical support for the Ukrainian State Committee for Nuclear Radiation Safety on specific waste issues

    International Nuclear Information System (INIS)

    Little, C.A.

    1995-01-01

    The government of Ukraine, a now-independent former member of the Soviet Union, has asked the United States to assist its State Committee for Nuclear and Radiation Safety (SCNRS) in improving its regulatory control in technical fields for which it has responsibility. The US Nuclear Regulatory Commission (NRC) is providing this assistance in several areas, including management of radioactive waste and spent fuel. Radioactive wastes resulting from nuclear power plant operation, maintenance, and decommissioning must be stored and ultimately disposed of appropriately. In addition, radioactive residue from radioisotopes used in various industrial and medical applications must be managed. The objective of this program is to provide the Ukrainian SCNRS with the information it needs to establish regulatory control over uranium mining and milling activities in the Zheltye Vody (Yellow Waters) area and radioactive waste disposal in the Pripyat (Chernobyl) area among others. The author of this report, head of the Environmental Technology Section, Health Sciences Research Division of Oak Ridge National Laboratory, accompanied NRC staff to Ukraine to meet with SCNRS staff and visit sites in question. The report highlights problems at the sites visited and recommends license conditions that SCNRS can require to enhance safety of handling mining and milling wastes. The author's responsibility was specifically for the visit to Zheltye Vody and the mining and milling waste sites associated with that facility. An itinerary for the Zheltye Vody portion of the trip is included as Appendix A

  16. 77 FR 27832 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2012-05-11

    ... organizations --Relations with non-governmental organizations --World Maritime Day --International Maritime... DEPARTMENT OF STATE [Public Notice: 7879] Shipping Coordinating Committee; Notice of Committee...-second Session of the International Maritime Organization (IMO) Technical Co-operation Committee (TCC 62...

  17. Functional Median Polish

    KAUST Repository

    Sun, Ying

    2012-08-03

    This article proposes functional median polish, an extension of univariate median polish, for one-way and two-way functional analysis of variance (ANOVA). The functional median polish estimates the functional grand effect and functional main factor effects based on functional medians in an additive functional ANOVA model assuming no interaction among factors. A functional rank test is used to assess whether the functional main factor effects are significant. The robustness of the functional median polish is demonstrated by comparing its performance with the traditional functional ANOVA fitted by means under different outlier models in simulation studies. The functional median polish is illustrated on various applications in climate science, including one-way and two-way ANOVA when functional data are either curves or images. Specifically, Canadian temperature data, U. S. precipitation observations and outputs of global and regional climate models are considered, which can facilitate the research on the close link between local climate and the occurrence or severity of some diseases and other threats to human health. © 2012 International Biometric Society.

  18. Polish Toxic Currency Options

    Directory of Open Access Journals (Sweden)

    Waldemar Gontarski

    2009-06-01

    Full Text Available Toxic currency options are defined on the basis of the opposition to the nature (essence of an option contract, which is justified in terms of norms founded on the general law clause of characteristics (nature of a relation (which represents an independent premise for imposing restrictions on the freedom of contracts. So-understood toxic currency options are unlawful. Indeed they contravene iuris cogentis regulations. These include for instance option contracts, which are concluded with a bank, if the bank has not informed about option risk before concluding the contract; or the barrier options, which focus only on the protection of bank’s interests. Therefore, such options may appear to be invalid. Therefore, performing contracts for toxic currency options may be qualified as a criminal mismanagement. For the sake of security, the manager should then take into consideration filing a claim for stating invalidity (which can be made in a court verdict. At the same time, if the supervisory board member in a commercial company, who can also be a subject to mismanagement offences, commits an omission involving lack of reaction (for example, if he/she fails to notify of the suspected offence committed by the management board members acting to the company’s detriment when the management board makes the company conclude option contracts which are charged with absolute invalidity the supervisory board member so acting may be considered to act to the company’s detriment. In the most recent Polish jurisprudence and judicature the standard of a “good host” is treated to be the last resort for determining whether the manager’s powers resulting from criminal regulations were performed. The manager of the exporter should not, as a rule, issue any options. Issuing options always means assuming an obligation. In the case of currency put options it is an absolute obligation to purchase a given amount in euro at exchange rate set in advance. On the

  19. Polish Higher Education: Intersectoral Distinctiveness

    Science.gov (United States)

    Musial, Joanna

    2014-01-01

    This study analyzes degrees of differences between the private and public sectors of Polish higher education. It finds them to be strong: Polish private institutions function very differently from Polish public institutions and these differences correspond with those found in the literature on higher education elsewhere in the world. Polish…

  20. 76 FR 50453 - Agenda and Notice of Public Meeting of the New Hampshire State Advisory Committee

    Science.gov (United States)

    2011-08-15

    ... advisory committees. The purpose of the planning meeting is to discuss future activities. Members of the....usccr.gov , or to contact the Eastern Regional Office at the above e-mail or street address. Deaf or...

  1. Domestic Consequences of United States Population Change. Report Prepared by the Select Committee on Population, U.S. House of Representatives, Ninety-Fifth Congress, Second Session.

    Science.gov (United States)

    Congress of the U.S., Washington, DC. House Select Committee on Population.

    The report, prepared by the Select Committee on Population of the United States House of Representatives, discusses the consequences of the changing age composition and geographical distribution of the population. The committee recommends that the government needs to anticipate these changes in order to develop a policy in response to the problems…

  2. An Unbiased View of the History of Polish Medical Physics by a Senior Polish Medical Physicist

    International Nuclear Information System (INIS)

    Chomicki, O. A.

    2008-01-01

    Here is a story told by Maria Sklodowska-Curie at the meeting of the International Committee of Intellectual Cooperation in 1921: 'In a free literary competition on the role and importance of elephants the Englishman's story was 'My adventures while shooting elephants in South Africa', the Frenchman was more concerned with 'The sexual and erotic life of elephants', while the Polish approach was invariably 'The elephant versus Poland's national independence', which seemed quite understandable in the light of over 120 years when Poland was partitioned and lost its independence. Since then this saying has become proverbial and came to express the unmistakably Polish tendency to see everything in terms of Polish interests. In my remarks and reminiscences on the history of the Polish Society of Medical Physics you will quickly recognize the same tendency. First, I will, among other things, try to open some old cupboards to 'produce good [things] from the store of good' (Matthew 12:35), especially concerning the first few years of the activity in medical physics in Poland, and second, I will draw some conclusions and/or offer suggestions based on what a senior medical physicist has seen for more than 50 years of his activity in this field. (author)

  3. Polish Semantic Parser

    Directory of Open Access Journals (Sweden)

    Agnieszka Grudzinska

    2000-01-01

    Full Text Available Amount of information transferred by computers grows very rapidly thus outgrowing the average man's capability of reception. It implies computer programs increase in the demand for which would be able to perform an introductory classitication or even selection of information directed to a particular receiver. Due to the complexity of the problem, we restricted it to understanding short newspaper notes. Among many conceptions formulated so far, the conceptual dependency worked out by Roger Schank has been chosen. It is a formal language of description of the semantics of pronouncement integrated with a text understanding algorithm. Substantial part of each text transformation system is a semantic parser of the Polish language. It is a module, which as the first and the only one has an access to the text in the Polish language. lt plays the role of an element, which finds relations between words of the Polish language and the formal registration. It translates sentences written in the language used by people into the language theory. The presented structure of knowledge units and the shape of understanding process algorithms are universal by virtue of the theory. On the other hand the defined knowledge units and the rules used in the algorithms ure only examples because they are constructed in order to understand short newspaper notes.

  4. Effects of Man's Activities on the Marine Environment; Committee on Commerce, United States Senate, Ninety-Fourth Congress, First Session. Committee Print.

    Science.gov (United States)

    Congress of the U.S., Washington, DC. Senate Committee on Commerce.

    This report, prepared for the Committee on Commerce and the National Ocean Policy Study Committee, describes many aspects of water pollution, both national and international. Specific sections are devoted to: (1) assessing man's influence on the oceans, (2) activities that generate marine pollution, (3) specific marine pollutants, (4) policy for…

  5. 76 FR 9742 - Agenda and Notice of Public Meeting of the New Jersey State Advisory Committee

    Science.gov (United States)

    2011-02-22

    .... Commission on Civil Rights and the Federal Advisory Committee Act (FACA), that briefing and planning meetings... of the planning meeting is to plan future activities. The purpose of the press conference is to... contact the ERO. See contact information below. Persons who are deaf or hearing-impaired who will attend...

  6. Communication of the USSR State Committee on the Utilization of Atomic Energy

    International Nuclear Information System (INIS)

    1988-01-01

    The Soviet Union confirms its steadfast intention of complying strictly with its obligations under the Conventions of 26 September 1986 on Early Notification of a Nuclear Accident and on Assistance in the Case of a Nuclear Accident or Radiological Emergency, and also the corresponding bilateral agreements and recommendations of the United Nations Committee on the Peaceful Uses of Outer Space.

  7. 78 FR 4189 - Advisory Committee on the Secretary of State's Strategic Dialogue With Civil Society

    Science.gov (United States)

    2013-01-18

    ... Dialogue With Civil Society ACTION: Notice of meeting. SUMMARY: Pursuant to the provisions of the Federal... Civil Society will convene in Washington, DC on March 12, 2013. The Committee provides advice on the.... Please call ahead to (202) 647-2413 to facilitate entry into the building. FOR FURTHER INFORMATION...

  8. 78 FR 29200 - Advisory Committee for the Study of Eastern Europe and the Independent States of the Former...

    Science.gov (United States)

    2013-05-17

    ... advanced graduate training, language training, and postdoctoral research. The committee includes...: April 19, 2013. Susan H. Nelson, Executive Director, Advisory Committee for Study of Eastern Europe and...

  9. The 2nd (Transnuklear) investigations committee - state of development and evaluation

    International Nuclear Information System (INIS)

    Harries, K.

    1990-01-01

    The investigations committee sees no reason to give up the peaceful utilization of nuclear energy in the Federal Republic of Germany or in any other country where conditions are suitable. Even the events which occurred in this context and were greatly exaggerated do not lead to a different conclusion. Operators, staff and ministries must handle these matters with strict accuracy, diligence and sensitivity. This goes for every issue in public and economic life and especially for nuclear energy. (orig./HSCH) [de

  10. Transformation of the Polish Banking Sector

    Directory of Open Access Journals (Sweden)

    Marek Stefański

    2009-07-01

    European Market, i.e. to look for new revenue sources, to reduce costs and improve their loan portfolios. The comparison of selected aspects of the Polish banking sector in the most developed EU Member States shows that the differences are still too large. Therefore, it seems correct to claim that the Polish banking system is undergoing another transition. It is adjustment to the Single European Market.

  11. [Lysenkoism in Polish botany].

    Science.gov (United States)

    Köhler, Piotr

    2008-01-01

    Lysenkoism in Poland was never an autonomous phenomenon. The whole array of reasons for which it appeared in Polish science would require a separate study--here it only needs to be pointed out that the major reasons included terror on the part of the security service, lawlessness, the ubiquitous atmosphere of intimidation and terror, censorship, the diminishing sphere of civil liberties, political show trials, propaganda and denunciations. An important role in facilitating the introduction of Lysenkoism was played also by the reorganization of science after World War Two, the isolation of Polish science from science in the West, as well as the damage it had suffered during the war. At first, Lysenkoism was promoted in Poland by a small group of enthusiastic and uncritical proponents. A overview of the events connected with the ten years of Lysenkoism in Poland (end of 1948--beginning of 1958) shows a two-tier picture of how the 'idea' was propagated. The first tier consisted in the activities of the Association of Marxist Naturalists [Koło Przyrodników-Marksistów], which it engaged in since the end of 1948. The Association was later transformed into a Union of Marxist Naturalists, and this in turn merged, in 1952, with the Copernican Society of Polish Naturalists [Polskie Towarzystwo Przyrodników im. Kopernika]. It was that society which promoted Lysenkoism longest, until the end of 1956. The propaganda and training activities of the circle and the society prepared ground for analogous activities of the newly formed Polish Academy of Science (PAN), which--since its very establishment in 1952--engaged in promoting Lysenkoism through its Second Division. These activities were aimed at naturalists, initially at those who were prominent scientists (eg. the conference at Kuźnice, 1950/1951), and then at those who were only starting their academic career (including national courses in new biology at Dziwnów, 1952, or Kortowo, 1953 and 1955). The end to promoting

  12. Polish Americans. Second, Revised Edition.

    Science.gov (United States)

    Lopata, Helen Znaniecka

    This book examines Polonia, the Polish ethnic community in America created by three giant waves of immigration between 1880 and 1990. The complicated history of this ethnic group is reflected in the lives of increasing numbers of Polish Americans, including recent immigrants brought by political and economic changes, as they achieve middle class…

  13. IDENTITY AND NEGOTIATION OF BOUNDARIES AMONG YOUNG POLISH JEWS

    OpenAIRE

    Cukras-Stelągowska, Joanna

    2015-01-01

    In this chapter, I would like to look at the processes of building the cultural identity of the young generation of Polish Jews, primarily including the models of constructing modern identifications with the Polish society, the Jewish people and the State of Israel. I will present the results of my own studies, and of those conducted by a few other young researchers dealing with these issues. My main theoretical sources are within the interpretive paradigm. The research methodology was based ...

  14. Bio-aggregates based building materials state-of-the-art report of the RILEM Technical Committee 236-BBM

    CERN Document Server

    Collet, Florence

    2017-01-01

    The work of the RILEM Technical Committee (TC -236 BBM) was dedicated to the study of construction materials made from plant particles. It considered the question whether building materials containing as main raw material recyclable and easily available plant particles are renewable. This book includes a state-of-the-art report and an appendix. The state-of-the-art report relates to the description of vegetal aggregates. Then, hygrothermal properties, fire resistance, durability and finally the impact of the variability of the method of production of bio-based concrete are assessed. The appendix is a TC report which presents the experience of a working group. The goal was to define testing methods for the measurement of water absorption, bulk density, particle size distribution, and thermal conductivity of bio aggregates. The work is based on a first round robin test of the TC-BBM where the protocols in use by the different laboratories (labs) are compared. .

  15. Materials of 46. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical. Volume 1,2,3

    International Nuclear Information System (INIS)

    2003-01-01

    Scientific assemblies of Polish Chemical Society are the most important chemical meetings organised annually in Poland. Basic as well as application studies in all chemical branches have been extensively presented. The next subjects were proposed as scientific sessions and symposia topics: organic chemistry, inorganic chemistry, physical chemistry, analytical chemistry, technology and chemical engineering, polymer chemistry, solid state chemistry, catalysis, biological chemistry, chemistry and technology of coal, environmental protection, didactics of chemistry, history of chemistry, young scientist forum as well as the reports of results of works sponsored by Committee of Scientific Research

  16. 77 FR 76164 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2012-12-26

    ... atmospheric pollution --Development of international measures for minimizing the transfer of invasive aquatic... pollution hazards of chemicals and preparation of consequential amendments --Additional guidelines for... DEPARTMENT OF STATE [Public Notice 8133] Shipping Coordinating Committee; Notice of Committee...

  17. Elder Abuse; Joint Hearing Before the Special Committee on Aging, United States Senate and the Select Committee on Aging, House of Representatives, Ninety-Sixth Congress, Second Session.

    Science.gov (United States)

    Congress of the U.S., Washington, DC. Senate Special Committee on Aging.

    This report of a joint hearing before the Senate and House Committees on Aging examines elder abuse as a growing problem in America. The testimony considers the benefits of community-based services for the elderly living with relatives, explores other forms of long-term care, and investigates ways to aid victims of elder abuse. An overview of the…

  18. Polishing large NaCl windows on a continuous polisher

    International Nuclear Information System (INIS)

    Williamson, R.

    1979-01-01

    The Helios and Antares CO 2 fusion laser systems incorporate numerous large sodium chloride windows. These must be refinished periodically, making necessary a consistent and predictable polishing capability. A continuous polisher (or annular lap) which might at Kirtland's Developmental Optical Facility. Large NaCl windows had not been polished on this type of machine. The machine has proven itself capable of producing lambda/16 figures at 633 nm (HeNe) with extremely smooth surfaces on glass. Since then, we have been working exclusively on NaCl optics. Due to different polishing parameters between NaCl and glass, and the slight solubility of the pitch in the slurry, this phase presents new problems. The work on glass will be reviewed. Results on NaCl to date will be reported. The potential of this type of machine relative to prisms, thin and irregularly shaped optics will be discussed

  19. 34 CFR 400.6 - What are the requirements for establishing a State Committee of Practitioners?

    Science.gov (United States)

    2010-07-01

    ...) Representatives of— (i) Organized labor; (ii) Business; (iii) Superintendents; (iv) Community-based organizations... the IDEA; (5) The State administrator of programs assisted under chapter 1; (6) The State...

  20. 11 CFR 106.2 - State allocation of expenditures incurred by authorized committees of Presidential primary...

    Science.gov (United States)

    2010-01-01

    ... to any State in which the primary election has already been held. (E) National advertising... production of media advertising, whether or not that advertising is used in more than one State, need not be... to any State if the fees are charged for consulting on national campaign strategy. Expenditures for...

  1. Detection of paint polishing defects

    Science.gov (United States)

    Rebeggiani, S.; Wagner, M.; Mazal, J.; Rosén, B.-G.; Dahlén, M.

    2018-06-01

    Surface finish plays a major role on perceived product quality, and is the first thing a potential buyer sees. Today end-of-line repairs of the body of cars and trucks are inevitably to secure required surface quality. Defects that occur in the paint shop, like dust particles, are eliminated by manual sanding/polishing which lead to other types of defects when the last polishing step is not performed correctly or not fully completed. One of those defects is known as ‘polishing roses’ or holograms, which are incredibly hard to detect in artificial light but are clearly visible in sunlight. This paper will present the first tests with a measurement set-up newly developed to measure and analyse polishing roses. The results showed good correlations to human visual evaluations where repaired panels were estimated based on the defects’ intensity, severity and viewing angle.

  2. Tooth polishing: The current status

    Directory of Open Access Journals (Sweden)

    Madhuri Alankar Sawai

    2015-01-01

    Full Text Available Healthy teeth and gums make a person feel confident and fit. As people go about their daily routines and with different eating and drinking habits, the tooth enamel turns yellowish or gets stained. Polishing traditionally has been associated with the prophylaxis procedure in most dental practices, which patients know and expect. However, with overzealous use of polishing procedure, there is wearing of the superficial tooth structure. This would lead to more accumulation of local deposits. Also, it takes a long time for the formation of the fluoride-rich layer of the tooth again. Hence, now-a-days, polishing is not advised as a part of routine oral prophylaxis procedure but is done selectively based on the patients′ need. The article here, gives an insight on the different aspects of the polishing process along with the different methods and agents used for the same.

  3. Lysenko affair and Polish botany.

    Science.gov (United States)

    Köhler, Piotr

    2011-01-01

    This article describes the slight impact of Lysenkoism upon Polish botany. I begin with an account of the development of plant genetics in Poland, as well as the attitude of scientists and the Polish intelligentsia toward Marxist philosophy prior to the World War II. Next I provide a short history of the introduction and demise of Lysenkoism in Polish science, with a focus on events in botany, in context with key events in Polish science from 1939 to 1958. The article outlines the little effects of Lysenkoism upon botanists and their research, as well as how botanists for the most part rejected what was often termed the "new biology." My paper shows that though Lysenko's theories received political support, and were actively promoted by a small circle of scientists and Communist party activists, they were never accepted by most botanists. Once the political climate in Poland altered after the events of 1956, Lysenko's theories were immediately abandoned.

  4. An Exploratory Study of the Factors That May Affect Female Consumers’ Buying Decision of Nail Polishes

    OpenAIRE

    Sun, Chen; Adhikari, Koushik; Koppel, Kadri

    2015-01-01

    The objective of this study was to determine what factors female consumers valued more when they buy nail polish. Ninety-eight female consumers participated in a nail polish consumer study at the Sensory Analysis Center, Kansas State University. A questionnaire containing a check-all-that-apply (CATA) question, behavior questions and demographic questions was presented to each consumer. In the CATA question, the factors that may affect consumers’ decision to buy a nail polish were asked, incl...

  5. Elastic emission polishing

    Energy Technology Data Exchange (ETDEWEB)

    Loewenthal, M.; Loseke, K.; Dow, T.A.; Scattergood, R.O.

    1988-12-01

    Elastic emission polishing, also called elastic emission machining (EEM), is a process where a stream of abrasive slurry is used to remove material from a substrate and produce damage free surfaces with controlled surface form. It is a noncontacting method utilizing a thick elasto-hydrodynamic film formed between a soft rotating ball and the workpiece to control the flow of the abrasive. An apparatus was built in the Center, which consists of a stationary spindle, a two-axis table for the workpiece, and a pump to circulate the working fluid. The process is controlled by a programmable computer numerical controller (CNC), which presently can operate the spindle speed and movement of the workpiece in one axis only. This apparatus has been used to determine material removal rates on different material samples as a function of time, utilizing zirconium oxide (ZrO{sub 2}) particles suspended in distilled water as the working fluid. By continuing a study of removal rates the process should become predictable, and thus create a new, effective, yet simple tool for ultra-precision mechanical machining of surfaces.

  6. Robotic Automation in Computer Controlled Polishing

    Science.gov (United States)

    Walker, D. D.; Yu, G.; Bibby, M.; Dunn, C.; Li, H.; Wu, Y.; Zheng, X.; Zhang, P.

    2016-02-01

    We first present a Case Study - the manufacture of 1.4 m prototype mirror-segments for the European Extremely Large Telescope, undertaken by the National Facility for Ultra Precision Surfaces, at the OpTIC facility operated by Glyndwr University. Scale-up to serial-manufacture demands delivery of a 1.4 m off-axis aspheric hexagonal segment with surface precision robots and computer numerically controlled ('CNC') polishing machines for optical fabrication. The objective was not to assess which is superior. Rather, it was to understand for the first time their complementary properties, leading us to operate them together as a unit, integrated in hardware and software. Three key areas are reported. First is the novel use of robots to automate currently-manual operations on CNC polishing machines, to improve work-throughput, mitigate risk of damage to parts, and reduce dependence on highly-skilled staff. Second is the use of robots to pre-process surfaces prior to CNC polishing, to reduce total process time. The third draws the threads together, describing our vision of the automated manufacturing cell, where the operator interacts at cell rather than machine level. This promises to deliver a step-change in end-to-end manufacturing times and costs, compared with either platform used on its own or, indeed, the state-of-the-art used elsewhere.

  7. [Responsibilities of ethics committees].

    Science.gov (United States)

    von Bergmann, K

    2000-05-01

    Increasing numbers of clinical research projects are submitted to ethical committees (institutional review boards) for approval. New therapeutic developments have to be evaluated by these committees to protect patients/volunteers. Thus, the responsibility of ethical committees is increasing. The "Nürnberger Kodex" and the "Declaration of Helsinki" are the background for these evaluations. According to the German drug law the physician is obligated by law to submit the protocol to such a committee. In addition, local state physician authorities require such a procedure. Important considerations during the review process besides ethical aspects are the informed consent, which should be written in an understandable form, and the obligations of the insurance.

  8. 76 FR 14375 - United States Integrated Ocean Observing System Advisory Committee

    Science.gov (United States)

    2011-03-16

    ... DEPARTMENT OF COMMERCE National Oceanic and Atmospheric Administration United States Integrated... Atmospheric Administration (NOAA), Department of Commerce. ACTION: Notice of Establishment of and Membership... support a variety of societal benefits. These benefits include supporting national defense; marine...

  9. 78 FR 32698 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2013-05-31

    ... DEPARTMENT OF STATE [Public Notice 8340] Shipping Coordinating Committee; Notice of Committee... Technical Co-operation Committee --Protection of vital shipping lanes --Periodic review of administrative... of the Organization since the twenty-eighth regular session of the Assembly --External relations...

  10. Developmental process and early phases of implementation for the United States Interagency Committee on Human Nutrition Research National Nutrition Research Roadmap

    Science.gov (United States)

    The United States Congress first called for improved coordination of human nutrition research within and among federal departments and agencies in the 1977 Farm Bill. Today, the Interagency Committee on Human Nutrition Research (ICHNR) is charged with improving the planning, coordination, and commu...

  11. Contaminated Frozen Strawberries in School Lunches. Hearing before the Committee on Agriculture, Nutrition, and Forestry. United States Senate, One Hundred Fifth Congress, First Session (June 5, 1997).

    Science.gov (United States)

    Congress of the U.S., Washington, DC. Senate Committee on Agriculture, Nutrition, and Forestry.

    This hearing includes testimony on contaminated strawberries in school lunches. Contaminated strawberries were determined to be the cause of an outbreak of hepatitis in the state of Michigan. In addition to statements by the committee members, testimony was given by: (1) Mary Ann Keeffe, Acting Under Secretary, Food Nutrition and Consumer…

  12. First annual report of the Radioactive Waste Management Advisory Committee to the Secretaries of State for the Environment, Scotland and Wales

    International Nuclear Information System (INIS)

    Wilkinson, D.

    1980-05-01

    The report is in sections, entitled: summary; introduction; current radioactive waste management practices; research into radioactive waste management; high level waste conditioning and disposal; A Nuclear Waste Disposal Corporation; and future work. Annexes cover the following: membership of Radioactive Waste Management Advisory Committee; terms of reference of other bodies; objectives of radioactive waste management; diagram of radiation exposure of the population of the United Kingdom; the categorisation of wastes; deep sea dumping; and geological research programme (text of the Committee's letter to the Secretary of State for the Environment). (U.K.)

  13. Polish-German bilingualism at school. A Polish perspective

    Directory of Open Access Journals (Sweden)

    Pulaczewska, Hanna

    2014-03-01

    Full Text Available This article presents the institutional frames for the acquisition of Polish literacy skills in Germany and the maintenance of Polish-German bilingualism after the repatriation of bilingual children to Poland. These processes are examined in the context of recent developments in the European domestic job market. While the European Union has placed proficiency in several languages among its educational objectives, and foreign languages have been made obligatory school subjects in all member countries, the potential advantages of internal European migrations for producing high-proficiency bilinguals are being ignored. Bilingualism resulting from migration and biculturalism enjoys little social prestige in the host countries. In Germany, there is significant regional variation in how school authorities react to challenges posed by the presence of minority languages. In many cases, the linguistic potential of many second-generation migrants and re-emigrants gets largely wasted because of lacking interest and incentives from German and Polish institutions alike.

  14. Disparities in access to effective treatment for infertility in the United States: an Ethics Committee opinion.

    Science.gov (United States)

    2015-11-01

    In the United States, economic, racial, ethnic, geographic, and other disparities exist in access to fertility treatment and in treatment outcomes. This opinion examines the factors that contribute to these disparities and proposes actions to address them. Copyright © 2015 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  15. Expert Committee on College Libraries

    OpenAIRE

    Joy, V. P.; Raman Nair, R.; Ayub, M.

    1994-01-01

    Importance of library and information services in higher education was emphasized in India by many committees of Government of India from 1917 including Calcutta University Commission under Sir Michael Saddler, University Education Commission (1949) chaired by Dr. S. Radhakrishnan, Ranganathan Committee (1958), Education Commission (1966) chaired by D.S. Kothari, as well as Sen Committee, Mehrotra Committee etc of UGC. But as education being a State subject; union government could not go beyo...

  16. Tax Incentives for Education. Hearing before the Committee on Finance. United States Senate, One Hundredth Congress, Second Session.

    Science.gov (United States)

    Congress of the U.S., Washington, DC. Senate Committee on Finance.

    The transcript of a hearing before the Senate Committee on Finance concerning tax incentives for education is presented. The statements of committee members and public witnesses testimony, both oral and written, are provided, as well as letters of support. Current tax expenditures for financial aid to college students, including student loan…

  17. 77 FR 5755 - Notice of Public Meetings of Committees of the Administrative Conference of the United States

    Science.gov (United States)

    2012-02-06

    ... (including information about remote access and obtaining special accommodations for persons with disabilities... Web site, at http://www.acus.gov . Click on ``Research,'' then on ``Committee Meetings.'' Comments may... committee. More information can be found in the ``About'' section of the Conference's Web site, at http...

  18. Sensing roughness and polish direction

    DEFF Research Database (Denmark)

    Jakobsen, Michael Linde; Olesen, Anders Sig; Larsen, Henning Engelbrecht

    2016-01-01

    As a part of the work carried out in a project supported by the Danish Council for Technology and Innovation, we have investigated the option of smoothing standard CNC-machined surfaces. In the process of constructing optical prototypes, involving custom-designed optics, the development cost...... and time consumption can become prohibitive in a research budget. Machining the optical surfaces directly is expensive and time consuming. Alternatively, a more standardized and cheaper machining method can be used, calling for the object to be manually polished. During the polishing process, the operator...... needs information about the RMS-value of the surface roughness and the current direction of the scratches introduced by the polishing process. The RMS-value indicates to the operator how far he is from the final finish, and the scratch orientation is often specified by the customer in order to avoid...

  19. Cannabinoids cases in polish athletes

    OpenAIRE

    A Pokrywka; Z Obmiński; D Kwiatkowska; R Grucza

    2009-01-01

    The aim of this study was to investigate the number of cases and the profiles of Polish athletes who had occasionally been using marijuana or hashish throughout the period of 1998-2004, with respect to: sex, age, and discipline of sport as well as the period of testing (in- and out-of-competition). Results of the study were compared with some data reported by other WADA accredited anti-doping laboratories. Totally, 13 631 urine samples taken from Polish athletes of both sexes, aged 10-67 year...

  20. Graphite Composite Panel Polishing Fixture

    Science.gov (United States)

    Hagopian, John; Strojny, Carl; Budinoff, Jason

    2011-01-01

    The use of high-strength, lightweight composites for the fixture is the novel feature of this innovation. The main advantage is the light weight and high stiffness-to-mass ratio relative to aluminum. Meter-class optics require support during the grinding/polishing process with large tools. The use of aluminum as a polishing fixture is standard, with pitch providing a compliant layer to allow support without deformation. Unfortunately, with meter-scale optics, a meter-scale fixture weighs over 120 lb (.55 kg) and may distort the optics being fabricated by loading the mirror and/or tool used in fabrication. The use of composite structures that are lightweight yet stiff allows standard techniques to be used while providing for a decrease in fixture weight by almost 70 percent. Mounts classically used to support large mirrors during fabrication are especially heavy and difficult to handle. The mount must be especially stiff to avoid deformation during the optical fabrication process, where a very large and heavy lap often can distort the mount and optic being fabricated. If the optic is placed on top of the lapping tool, the weight of the optic and the fixture can distort the lap. Fixtures to support the mirror during fabrication are often very large plates of aluminum, often 2 in. (.5 cm) or more in thickness and weight upwards of 150 lb (68 kg). With the addition of a backing material such as pitch and the mirror itself, the assembly can often weigh over 250 lb (.113 kg) for a meter-class optic. This innovation is the use of a lightweight graphite panel with an aluminum honeycomb core for use as the polishing fixture. These materials have been used in the aerospace industry as structural members due to their light weight and high stiffness. The grinding polishing fixture consists of the graphite composite panel, fittings, and fixtures to allow interface to the polishing machine, and introduction of pitch buttons to support the optic under fabrication. In its

  1. AGU Committees

    Science.gov (United States)

    Administrative Committees are responsible for those functions required for the overall performance or well-being of AGU as an organization. These committees are Audit and Legal Affairs, Budget and Finance*, Development, Nominations*, Planning, Statutes and Bylaws*, Tellers.Operating Committees are responsible for the policy direction and operational oversight of AGU's primary programs. The Operating Committees are Education and Human Resources, Fellows*, Information Technology, International Participation*, Meetings, Public Affairs, Public Information, Publications*.

  2. Advisory Committee on Immunization Practices Recommended Immunization Schedule for Children and Adolescents Aged 18 Years or Younger - United States, 2018.

    Science.gov (United States)

    Robinson, Candice L; Romero, José R; Kempe, Allison; Pellegrini, Cynthia; Szilagyi, Peter

    2018-02-09

    In October 2017, the Advisory Committee on Immunization Practices (ACIP) approved the Recommended Immunization Schedule for Children and Adolescents Aged 18 Years or Younger - United States, 2018. The 2018 child and adolescent immunization schedule summarizes ACIP recommendations, including several changes from the 2017 immunization schedules, in three figures and footnotes to the figures. These documents can be found on the CDC immunization schedule website (https://www.cdc.gov/vaccines/schedules/index.html). These immunization schedules are approved by ACIP (https://www.cdc.gov/vaccines/acip/index.html), the American Academy of Pediatrics (https://www.aap.org), the American Academy of Family Physicians (https://www.aafp.org), and the American College of Obstetricians and Gynecologists (https://www.acog.org). Health care providers are advised to use the figures and the footnotes together. The full ACIP recommendations for each vaccine, including contraindications and precautions, can be found at https://www.cdc.gov/vaccines/hcp/acip-recs/index.html. Providers should be aware that changes in recommendations for specific vaccines can occur between annual updates to the childhood/adolescent immunization schedules. If errors or omissions are discovered within the child and adolescent schedule, CDC posts revised versions on the CDC immunization schedule website.

  3. Advisory Committee on Immunization Practices Recommended Immunization Schedule for Adults Aged 19 Years or Older - United States, 2018.

    Science.gov (United States)

    Kim, David K; Riley, Laura E; Hunter, Paul

    2018-02-09

    In October 2017, the Advisory Committee on Immunization Practices (ACIP) voted to approve the Recommended Immunization Schedule for Adults Aged 19 Years or Older, United States, 2018. The 2018 adult immunization schedule summarizes ACIP recommendations in two figures and a table of contraindications and precautions for vaccines recommended for adults, and is intended is to assist health care providers in implementing the current ACIP recommendations for vaccinating adults. The schedule can be found at https://www.cdc.gov/vaccines/schedules.* The full ACIP recommendations for each vaccine are available at https://www.cdc.gov/vaccines/hcp/acip-recs/index.html. The 2018 adult immunization schedule has also been approved by the American College of Physicians (https://www.acponline.org), the American Academy of Family Physicians (https://www.aafp.org), the American College of Obstetricians and Gynecologists (https://www.acog.org), and the American College of Nurse-Midwives (http://www.midwife.org). The ACIP-recommended use of each vaccine is developed after an in-depth review of vaccine-related data, including data on disease epidemiology, vaccine efficacy and effectiveness, vaccine safety, feasibility of program implementation, and economic aspects of immunization policy (1).

  4. Use of the National Committee for Clinical Laboratory Standards Guidelines for Disk Diffusion Susceptibility Testing in New York State Laboratories

    Science.gov (United States)

    Kiehlbauch, Julia A.; Hannett, George E.; Salfinger, Max; Archinal, Wendy; Monserrat, Catherine; Carlyn, Cynthia

    2000-01-01

    Accurate antimicrobial susceptibility testing is vital for patient care and surveillance of emerging antimicrobial resistance. The National Committee for Clinical Laboratory Standards (NCCLS) outlines generally agreed upon guidelines for reliable and reproducible results. In January 1997 we surveyed 320 laboratories participating in the New York State Clinical Evaluation Program for General Bacteriology proficiency testing. Our survey addressed compliance with NCCLS susceptibility testing guidelines for bacterial species designated a problem (Staphylococcus aureus and Enterococcus species) or fastidious (Streptococcus pneumoniae, Haemophilus influenzae, and Neisseria gonorrhoeae) organism. Specifically, we assessed compliance with guidelines for inoculum preparation, medium choice, number of disks per plate, and incubation conditions for disk diffusion tests. We also included length of incubation for S. aureus and Enterococcus species. We found overall compliance with the five characteristics listed above in 80 of 153 responding laboratories (50.6%) for S. aureus and 72 of 151 (47.7%) laboratories for Enterococcus species. The most common problem was an incubation time shortened to less than 24 h. Overall compliance with the first four characteristics was reported by 92 of 221 (41.6%) laboratories for S. pneumoniae, 49 of 163 (30.1%) laboratories for H. influenzae, and 11 of 77 (14.3%) laboratories for N. gonorrhoeae. Laboratories varied from NCCLS guidelines by placing an excess number of disks per plate. Laboratories also reported using alternative media for Enterococcus species, N. gonorrhoeae, and H. influenzae. This study demonstrates a need for education among clinical laboratories to increase compliance with NCCLS guidelines. PMID:10970381

  5. Cannabinoids cases in polish athletes

    Directory of Open Access Journals (Sweden)

    A Pokrywka

    2009-07-01

    Full Text Available The aim of this study was to investigate the number of cases and the profiles of Polish athletes who had occasionally been using marijuana or hashish throughout the period of 1998-2004, with respect to: sex, age, and discipline of sport as well as the period of testing (in- and out-of-competition. Results of the study were compared with some data reported by other WADA accredited anti-doping laboratories. Totally, 13 631 urine samples taken from Polish athletes of both sexes, aged 10-67 years, performing 46 disciplines of sport were tested. Cannabinoids were detected in 267 samples. Among Polish athletes the relative number of positive THC (tetrahydrocannabinol samples was one of the highest in Europe. The group of young Polish athletes (aged 16-24 years was the most THC-positive. THC-positive cases were noted more frequently in male athletes tested during out of competitions. The so-called contact sports (rugby, ice hockey, skating, boxing, badminton, body building and acrobatic sports were those sports, where the higher risk of cannabis use was observed. The legal interpretation of some positive cannabinoids results would be difficult because of some accidental and unintentional use of the narcotics by sportsmen. It was concluded that national anti-doping organizations (NADO’s, which are competent to judge whether the anti-doping rules were violated, should take into account the possibility of non-intentional doping use of cannabinoids via passive smoking of marijuana.

  6. Survey of brachytherapy practice in the United States: a report of the Clinical Research Committee of the American Endocurietherapy Society.

    Science.gov (United States)

    Nag, S; Owen, J B; Farnan, N; Pajak, T F; Martinez, A; Porter, A; Blasko, J; Harrison, L B

    1995-01-01

    To obtain reliable data on the extent of the brachytherapy practice in the United States by conducting a comprehensive survey of all facilities. The Clinical Research Committee of the AES surveyed all 1321 radiation oncology facilities identified in the Patterns of Care Study (PCS) of the American College of Radiology (ACR). Multiple mailings and follow-up were made to obtain a high response rate. Survey responders and nonresponders were compared using chi-square tests. Summary statistics were reported. Of the 1321 facilities, 1054 responded (80%). Hospital-based and larger facilities had a statistically significant higher rate of response. Brachytherapy was being performed at 819 facilities (the median number of procedures = 21-50). Two hundred and two facilities did no brachytherapy. The common isotopes used were 137Cs (705 facilities), 192Ir (585 facilities), 125I (236 facilities), and 131I (194 facilities). The common brachytherapy techniques used were intracavitary (751 facilities), interstitial (536 facilities), intraluminal (310 facilities), and plaques (148 facilities). Remote afterloaded brachytherapy was used at 205 centers as follows: high dose rate (HDR) (164), medium dose rate (MDR) (5), and low dose rate (LDR) (36). Computerized dosimetry was most commonly used (790 facilities), followed by Patterson-Parker (104 facilities) and Quimby (72 facilities). The common sites treated were cervix (701 facilities), endometrium (565 facilities), head and neck (354 facilities), and lung (344 facilities). Data regarding brachytherapy practice has been obtained from a large percentage (80%) of all facilities in the United States. The majority (78-81%) of radiation oncology facilities perform brachytherapy; however, its use is restricted to gynecological implants in many of these centers. The results from this survey will be used to develop a pattern of care study and data registry in brachytherapy.

  7. Laser polishing for topography management of accelerator cavity surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Liang [College of William and Mary, Williamsburg, VA (United States); Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Klopf, J. Mike [College of William and Mary, Williamsburg, VA (United States); Reece, Charles E. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Kelley, Michael J. [College of William and Mary, Williamsburg, VA (United States); Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

    2015-07-20

    Improved energy efficiency and reduced cost are greatly desired for advanced particle accelerators. Progress toward both can be made by atomically-smoothing the interior surface of the niobium superconducting radiofrequency accelerator cavities at the machine's heart. Laser polishing offers a green alternative to the present aggressive chemical processes. We found parameters suitable for polishing niobium in all surface states expected for cavity production. As a result, careful measurement of the resulting surface chemistry revealed a modest thinning of the surface oxide layer, but no contamination.

  8. 39 CFR 5.2 - Committee procedure.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Committee procedure. 5.2 Section 5.2 Postal Service UNITED STATES POSTAL SERVICE THE BOARD OF GOVERNORS OF THE U.S. POSTAL SERVICE COMMITTEES (ARTICLE V) § 5.2 Committee procedure. Each committee establishes its own rules of procedure, consistent with...

  9. 50 CFR 453.05 - Committee meetings.

    Science.gov (United States)

    2010-10-01

    ... OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS ENDANGERED SPECIES EXEMPTION PROCESS ENDANGERED SPECIES COMMITTEE § 453.05 Committee meetings. (a) The committee shall meet at the call of the... Wildlife and Fisheries JOINT REGULATIONS (UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE...

  10. Farmers' pensions and the Polish economic crisis.

    Science.gov (United States)

    Simanis, J G

    1983-04-01

    The Polish Government, in 1977, inaugurated a new pension program that made old-age and invalidity benefits available for the first time to most farmers in that country. The evolution and eventual failure of that program were closely intertwined with a growing national economic crisis, manifested in widespread popular unrest and culminating in emergence of the Solidarity movement. The farmers' pension program was originally presented as both a social security measure and a vehicle for improving agricultural efficiency. The economic situation was expected to benefit as farms of older owners were passed to younger, presumably more efficient, successors, with the state sometimes acting as intermediary. A further step to bind the social security concept to agricultural efficiency came through relating the pension amount to the quantity of produce the individual farmer sold to the state over a number of years. The failure of these provisions and other unpopular features of the new program was aggravated by inflation and continuing deterioration of the Polish economy.

  11. Financial repression, money growth, and seignorage: The Polish experience

    NARCIS (Netherlands)

    Aarle, B. van; Budina, N.

    1997-01-01

    Financial Repression, Money Growth and Seignorage: The Polish Experience. — A small analytical framework is developed to analyze the relation between reserve requirements, base money growth and seignorage revenues. From the analysis, the authors can derive of steady-state seignorage revenues as a

  12. Hearings Before the Select Committee on Nutrition and Human Needs of the United States Senate, Ninety-Third Congress, First Session. Nutrition Education--1973. Part 6--Phosphate Research and Dental Decay. Hearings Held Washington, D.C., April 16, 1973.

    Science.gov (United States)

    Congress of the U.S., Washington, DC. Senate Select Committee on Nutrition and Human Needs.

    These hearings before the Select Committee on Nutrition and Human Needs of the United States Senate include testimony on the subject of research into the use of phosphates to prevent dental decay. The purpose of the hearing was to explore certain dental health questions raised during the committee's recent hearings on the Television Advertising of…

  13. Steady-state operation of magnetic fusion devices: Plasma control and plasma facing components. Report on the IAEA technical committee meeting held at Fukuoka, 25-29 October 1999

    International Nuclear Information System (INIS)

    Engelmann, F.

    2000-01-01

    An IAEA Technical Committee Meeting on Steady-State Operation of Magnetic Fusion Devices - Plasma Control and Plasma Facing Components was held at Fukuoka, Japan, from 25 to 29 October 1999. The meeting was the second IAEA Techical Committee Meeting on the subject, following the one held at Hefei, China, a year earlier. The meeting was attended by over 150 researchers from 10 countries

  14. Sensory factors affecting female consumers' acceptability of nail polish.

    Science.gov (United States)

    Sun, C; Koppel, K; Adhikari, K

    2015-12-01

    The objectives of this study were to determine what sensory factors impact consumers' acceptability of nail polishes, to explore how these sensory factors impact consumers' acceptability of nail polishes, to investigate whether there are any consumer segments according to their overall acceptability on different nail polishes and to scrutinize how the consumer segments are related to the sensory factors. Ninety-eight females participated in a nail polish consumer study at Kansas State University. Eight commercial products belonging to four categories - regular (REG), gel (GEL), flake (FLK) and water-based (WAT) - were evaluated. Each nail polish sample was evaluated twice by each participant in two different tasks - a task devoted to applying and evaluating the product and a task devoted to observing the appearance and evaluating the product. Pearson's correlation analysis, analysis of variance (ANOVA), external preference mapping, cluster analysis and internal preference mapping were applied for data analysis. Participants' scores of overall liking of the nail polishes were similar in the application task and in the observation task. In general, participants liked the REG and GEL product samples more than the FLK and WAT samples. Among all the sensory attributes, appearance attributes were the major factors that affected participants' overall liking. Aroma seemed to be a minor factor to participants' overall liking. Some sensory attributes, such as runny, shininess, opacity, spreadability, smoothness, coverage and wet appearance, were found to drive participants' overall acceptability positively, whereas others such as pinhole, fatty-edges, blister, brushlines, pearl-like, flake-protrusion, glittery and initial-drag impacted participants' overall acceptability negatively. Four clusters of participants were identified according to their overall liking scores from both the application task and the observation task. Participants' acceptability, based on different

  15. PORT (Programme of Recognition and Therapy): the first Polish recognition and treatment programme for patients with an at-risk mental state.

    Science.gov (United States)

    Kotlicka-Antczak, Magdalena; Pawełczyk, Tomasz; Rabe-Jabłońska, Jolanta; Pawełczyk, Agnieszka

    2015-08-01

    To present the activities of the first early intervention centre in Poland and the Programme of Recognition and Therapy (PORT) run by the centre. An overview of the admission process, diagnostic procedures and therapeutic interventions offered to individuals with an at-risk mental state. The PORT programme, developed in 2010, included 81 individuals, aged 15-29 years so far. The diagnostic procedures consists of evaluation of symptoms with the use of the Comprehensive Assessment of At-Risk Mental State (CAARMS), assessment of premorbid and current personality traits and the evaluation of cognitive functions. Therapeutic interventions include cognitive behavioural therapy, diet supplementation with omega-3 fatty acids and pharmacological treatment. Overall rate of conversion into psychosis within the years 2010-2103 was 18.5%. The programme has also been a source of research in the field of early psychosis. The PORT programme enables young people with an ARMS an easy access to the specialized service offering treatment tailored to their specific needs. © 2014 Wiley Publishing Asia Pty Ltd.

  16. Research ethics committees in the regulation of clinical research: comparison of Finland to England, Canada, and the United States.

    Science.gov (United States)

    Hemminki, Elina

    2016-01-19

    The aim of this paper is to compare common features and variation in the work of research ethics committees (RECs) in Finland to three other countries - England, Canada, the United States of America (USA) - in the late 2000s. Several approaches and data sources were used, including semi- or unstructured interviews of experts, documents, previous reports, presentations in meetings and observations. A theoretical framework was created and data from various sources synthesized. In Finland, RECs were regulated by a medical research law, whereas in the other countries many related laws and rules guided RECs; drug trials had specific additional rules. In England and the USA, there was a REC control body. In all countries, members were voluntary and included lay-persons, and payment arrangements varied. Patient protection was the main ethics criteria, but other criteria (research advancement, availability of results, payments, detailed fulfilment of legislation) varied. In all countries, RECs had been given administrative duties. Variations by country included the mandate, practical arrangements, handling of multi-site research, explicitness of proportionate handlings, judging scientific quality, time-limits for decisions, following of projects, role in institute protection, handling conflicts of interests, handling of projects without informed consent, and quality assurance research. The division of work between REC members and secretariats varied in checking of formalities. In England, quality assurance of REC work was thorough, fairly thorough in the USA, and not performed in Finland. The work of RECs in the four countries varied notably. Various deficiencies in the system require action, for which international comparison can provide useful insights.

  17. Long Distance Solidarity: Polish Public Opinion and the Boer War 1899–1902

    Directory of Open Access Journals (Sweden)

    Szlanta Piotr

    2017-06-01

    Full Text Available The bloody conflict which was taking place in South Africa in the years 1899-1902 was followed with a great interest by Polish public opinion. Its greatest part strongly sympathized with the Boer republics. Their burgers were idealized and presented by the Polish press as brave fighters for independence, who dared to stand up against the world empire to defend their rights while Great Britain was attributed full responsibility for the outbreak of the war. For many Poles the Boers personified the general idea of freedom fighters and symbolized all suppressed nations. Their sad fate seemed to be quite similar to the Polish one and this similarity was the main source of sympathy toward defenders of the Transvaal and Free Orange State. Voices of few Polish intellectuals, who called for a more objective and not so emotional view on the war, could not change the pro-Boers stance of the greatest part of Polish public opinion.

  18. Polish energy-system modernisation

    International Nuclear Information System (INIS)

    Drozdz, M.

    2003-01-01

    The Polish energy-system needs intensive investments in new technologies, which are energy efficient, clean and cost effective. Since the early 1990s, the Polish economy has had practically full access to modern technological devices, equipment and technologies. Introducing new technologies is a difficult task for project teams, constructors and investors. The author presents a set of principles for project teams useful in planning and energy modernisation. Several essential features are discussed: Energy-efficient appliances and systems; Choice of energy carriers, media and fuels; Optimal tariffs, maximum power and installed power; Intelligent, integrated, steering systems; Waste-energy recovery; Renewable-energy recovery. In practice there are several difficulties connected with planning and realising good technological and economic solutions. The author presents his own experiences of energy-system modernisation of industrial processes and building new objects. (Author)

  19. Energy savings in Polish buildings

    Energy Technology Data Exchange (ETDEWEB)

    Markel, L.C.; Gula, A.; Reeves, G.

    1995-12-31

    A demonstration of low-cost insulation and weatherization techniques was a part of phase 1 of the Krakow Clean Fossil Fuels and Energy Efficient Project. The objectives were to identify a cost-effective set of measures to reduce energy used for space heating, determine how much energy could be saved, and foster widespread implementation of those measures. The demonstration project focused on 4 11-story buildings in a Krakow housing cooperative. Energy savings of over 20% were obtained. Most important, the procedures and materials implemented in the demonstration project have been adapted to Polish conditions and applied to other housing cooperatives, schools, and hospitals. Additional projects are being planned, in Krakow and other cities, under the direction of FEWE-Krakow, the Polish Energie Cities Network, and Biuro Rozwoju Krakowa.

  20. SAFETY PLATFORM OF POLISH TRANSPORT

    Directory of Open Access Journals (Sweden)

    Katarzyna CHRUZIK

    2016-03-01

    Full Text Available Analyzing the level of Polish transport safety culture can be seen that it is now dependent on the culture of safety management within the organization and the requirements and recommendations of law in this field for different modes of transport (air, rail, road, water. Of the four basic types of transport requirements are widely developed in the aviation, rail, and water – the sea. In order to harmonize the requirements for transport safety so it appears advisable to develop a platform for exchange of safety information for different modes of transport, and the development of good practices multimodal offering the possibility of improving Polish transport safety. Described in the publication of the proposal in addition to the alignment platform experience and knowledge in the field of transport safety in all its kinds, it can also be a tool for perfecting new operators of public transport.

  1. Polishing compound for plastic surfaces

    Science.gov (United States)

    Stowell, M.S.

    1991-01-01

    This invention is comprised of a polishing compound for plastic materials. The compound includes approximately by approximately by weight 25 to 80 parts at least one petroleum distillate lubricant, 1 to 12 parts mineral spirits, 50 to 155 parts abrasive paste, and 15 to 60 parts water. Preferably, the compound includes approximately 37 to 42 parts at least one petroleum distillate lubricant, up to 8 parts mineral spirits, 95 to 110 parts abrasive paste, and 50 to 55 parts water. The proportions of the ingredients are varied in accordance with the particular application. The compound is used on PLEXIGLAS{trademark}, LEXAN{trademark}, LUCITE{trademark}, polyvinyl chloride (PVC), and similar plastic materials whenever a smooth, clear polished surface is desired.

  2. Careers of young Polish chemists

    OpenAIRE

    Kosmulski, Marek

    2014-01-01

    Typical young Polish scientist is an alumnus of doctoral studies at the same university and department where he/she completed his/her Master degree. The career is continued by receiving a habilitation at the same university and department. Then a holder of habilitation is promoted to a tenured position at the same university and department. Detailed analysis of scientific careers of 154 recent Ph.D. recipients and of 16 habilitation candidates in chemistry from University of Warsaw is present...

  3. The place of polish in the multilingual space of the European Union

    Directory of Open Access Journals (Sweden)

    T. I. Neprytska

    2015-03-01

    Full Text Available The article studies the position of the Polish language in the multilingual space of the European Union and determines the key factors which facilitate its gaining popularity and spreading in Europe. A large territory and population determine the significant presence of Polish in the European Union. Intense economic development facilitates popularization of learning and using Polish in the business medium, however, English was and still remains the dominating language of business. Active work of the state on improving the reputation of the country abroad, civilizational (value­based unity with other nations of the EU, favorable geographical position, common Indo­European roots of Germanic, Romanic and Slavonic  languages as well as usage of the Latin type create favorable conditions for the development and popularization of Polish on the territory of the EU. The article also mentions a number of concerns, which are rooted in the historical past of a dependent or semi­dependent existence of the Polish people, namely, the existence of the Polish and culture in the shade of German and Russian culture space, the negative international image of modern Poland, which was formed at the beginning of the 1990­s, the low level of Europeans’ familiarization with the Polish culture, absence of popularity and economic necessity of learning Polish abroad.

  4. 78 FR 36816 - U.S. Department of State Advisory Committee on Private International Law (ACPIL): Public Meeting...

    Science.gov (United States)

    2013-06-19

    ... Committee. Time and Place: The meeting will take place on Friday, July 12, 2013, at 9:00 a.m. EDT and is scheduled to last until no later than 1:00 p.m. EDT. The meeting will take place in Room 6421 of the... the collection is to validate the identity of individuals who enter Department facilities. The data...

  5. 78 FR 11133 - Notice of Public Meetings of Committees of the Administrative Conference of the United States

    Science.gov (United States)

    2013-02-15

    ... issues implicated by agency use of social media to support rulemaking. The Conference's consultant for... all business has been completed. Meeting updates will be posted on the Conference's Web site ( www... Committee on Adjudication will meet to consider a draft report and recommendations on social security...

  6. 75 FR 16225 - U.S. Department of State Advisory Committee on Private International Law: Organization of...

    Science.gov (United States)

    2010-03-31

    ... the full Advisory Committee. In the context of the Seventh Inter-American Specialized Conference on... the English text of the Convention to conform to the Spanish version. Copies of proposed corrections to the English text can be obtained through the contact points listed below. Other developments which...

  7. 75 FR 4440 - U.S. Department of State Advisory Committee on Private International Law: Organization of...

    Science.gov (United States)

    2010-01-27

    ... a meeting of the full Advisory Committee. In the context of the Seventh Inter-American Specialized... English text of the Convention to conform to the Spanish version. Copies of proposed corrections to the English text can be obtained through the contact points listed below. Other developments which may be...

  8. 77 FR 15355 - Notice of Public Meetings of Committees of the Administrative Conference of the United States

    Science.gov (United States)

    2012-03-15

    ... information about remote access and obtaining special accommodations for persons with disabilities), and how to submit comments to each committee can be found on the Conference's Web site, at http://www.acus... Pritzker. More information can be found in the ``About'' section of the Conference's Web site, at http...

  9. 50 CFR 453.04 - Committee information gathering.

    Science.gov (United States)

    2010-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS ENDANGERED SPECIES EXEMPTION PROCESS ENDANGERED SPECIES COMMITTEE § 453.04 Committee information gathering. (a) Written submissions... Section 453.04 Wildlife and Fisheries JOINT REGULATIONS (UNITED STATES FISH AND WILDLIFE SERVICE...

  10. The tourism attractiveness of Polish libraries

    OpenAIRE

    Miedzińska, Magdalena; Tanaś, Sławoj

    2009-01-01

    The aim of the article is to draw the reader's attention to the tourism attractiveness of renowned Polish libraries. These have attained a tourism function due to tourism exploration and penetration, but remain in the shadow of other Polish cultural assets. The article outlines the historical geography of Polish libraries, an analysis of tourism assets and an attempt to classify and catalogue libraries in Poland.

  11. Update of technical coordinating committee activities

    International Nuclear Information System (INIS)

    Alvarado, R.A.

    1995-01-01

    The Technical Coordinating Committee has its origins in the earliest days of implementing the Low-Level Radioactive Waste Policy Act. Between 1982 and 1985, individuals in several of the states felt that coordination among the states would be beneficial to all by affording states a cost-effective method for sharing ideas, discussing alternatives, and presenting solutions to common problems. At the current time, the committee comprises members from each of the sited states. Various compacts, federal agencies, and industry groups participate in committee activities. The Low-Level Management Program provides support for the committee through the provision of logistical support and limited manpower allocation. Activities of the committee have recently focused on waste treatment and minimization technologies. The committee also has worked diligently to see the review of the 3RSTAT computer code completed. The committee has taken a position on various regulatory proposals the past year. The committee expects to continue its work until new sites are brought online

  12. Update of technical coordinating committee activities

    Energy Technology Data Exchange (ETDEWEB)

    Alvarado, R.A.

    1995-12-31

    The Technical Coordinating Committee has its origins in the earliest days of implementing the Low-Level Radioactive Waste Policy Act. Between 1982 and 1985, individuals in several of the states felt that coordination among the states would be beneficial to all by affording states a cost-effective method for sharing ideas, discussing alternatives, and presenting solutions to common problems. At the current time, the committee comprises members from each of the sited states. Various compacts, federal agencies, and industry groups participate in committee activities. The Low-Level Management Program provides support for the committee through the provision of logistical support and limited manpower allocation. Activities of the committee have recently focused on waste treatment and minimization technologies. The committee also has worked diligently to see the review of the 3RSTAT computer code completed. The committee has taken a position on various regulatory proposals the past year. The committee expects to continue its work until new sites are brought online.

  13. Corporate Politics on Polish Millennials

    OpenAIRE

    Natalia Roślik

    2017-01-01

    In the very beginning of this particular paper, an author is trying to determine and describe who Millennials actually are. Then, the basis of Millennials definition is analysing corporation’s activity over the past years regarding this age group. The main goal of the thesis is to bring their specific futures out and describe what corporations on Polish job market are doing to encourage them to work in their offices. Especially in Poland within the last years, it is observed that big multinat...

  14. Polish Foundation for Energy Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    The Polish Foundation for Energy Efficiency (FEWE) was established in Poland at the end of 1990. FEWE, as an independent and non-profit organization, has the following objectives: to strive towards an energy efficient national economy, and to show the way and methods by use of which energy efficiency can be increased. The activity of the Foundation covers the entire territory of Poland through three regional centers: in Warsaw, Katowice and Cracow. FEWE employs well-known and experienced specialists within thermal and power engineering, civil engineering, economy and applied sciences. The organizer of the Foundation has been Battelle Memorial Institute - Pacific Northwest Laboratories from the USA.

  15. 78 FR 58596 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2013-09-24

    ... DEPARTMENT OF STATE [Public Notice 8481] Shipping Coordinating Committee; Notice of Committee... --External relations --Report on the status of the Convention and membership of the Organization --Report on... performs functions --Supplementary agenda items, if any The agenda items for A 28, to be considered include...

  16. NRC testimony before the Subcommittee on Nuclear Regulation of the Committee on Environment and Public Works, United States Senate

    International Nuclear Information System (INIS)

    1977-10-01

    NRC staff testimony before the U.S. Senate's Subcommittee on Nuclear Regulation, Committee on Environment and Public, is presented. The testimony pertains to the staff's role in the licensing process affecting the Virginia Electric and Power Company's North Anna nuclear plant. It explains the steps taken since 1973, and particularly since formation of the U.S. Nuclear Regulatory Commission in January 1975, to improve the timeliness of submission of information from the staff to the Commission licensing boards

  17. Sexual activity of Polish adults

    Directory of Open Access Journals (Sweden)

    Beata Pastwa-Wojciechowska

    2014-03-01

    Full Text Available Aim. The purpose of this research was to explore the subject of sexual activity in the Polish population, with special focus on age and gender differences, and sexual infidelity. Sexual activity is one of the basic factors in initiating and maintaining relationships. On the one hand, sexual activity enables us to meet natural needs and maintain an intimate relationship with another human being; on the other, it may allow us to overcome loneliness and social isolation by providing the opportunity to express feelings of closeness and unity. Material and method. The research was conducted on a representative group of 3,200 Poles aged between 15–49, with the support of a well-known Polish research company – TNS OBOP. Face-to-face and Pencil and Paper (PAPI interviews were carried out. Results. The results focus on two main issues: the age and motives of sexual initiation among teenagers (with a significant percentage starting their sexual activity at the age of 15, and the quality of the sexual lives of adults (average number of sexual partners, sexual infidelity and sexual satisfaction. Conclusion. There is dependence between the type of relationship and the performance or non-performance of sexual activity, as well as the quality of the relationship. Among both adolescents and adults, remaining in a stable relationship (partnership or marriage promotes loyalty. The performance of sexual goals turns out to be an important mechanism regulating the interpersonal aspects of a relationship, influencing their perception and evaluation.

  18. Buffered Electrochemical Polishing of Niobium

    Energy Technology Data Exchange (ETDEWEB)

    Ciovati, Gianluigi [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Tian, Hui [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); College of William and Mary, Williamsburg, VA (United States); Corcoran, Sean [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States)

    2011-03-01

    The standard preparation of superconducting radio-frequency (SRF) cavities made of pure niobium include the removal of a 'damaged' surface layer, by buffered chemical polishing (BCP) or electropolishing (EP), after the cavities are formed. The performance of the cavities is characterized by a sharp degradation of the quality factor when the surface magnetic field exceeds about 90 mT, a phenomenon referred to as 'Q-drop.' In cavities made of polycrystalline fine grain (ASTM 5) niobium, the Q-drop can be significantly reduced by a low-temperature (? 120 °C) 'in-situ' baking of the cavity if the chemical treatment was EP rather than BCP. As part of the effort to understand this phenomenon, we investigated the effect of introducing a polarization potential during buffered chemical polishing, creating a process which is between the standard BCP and EP. While preliminary results on the application of this process to Nb cavities have been previously reported, in this contribution we focus on the characterization of this novel electrochemical process by measuring polarization curves, etching rates, surface finish, electrochemical impedance and the effects of temperature and electrolyte composition. In particular, it is shown that the anodic potential of Nb during BCP reduces the etching rate and improves the surface finish.

  19. Popularity of marijuana among Polish students

    Directory of Open Access Journals (Sweden)

    Michał Pająk

    2017-09-01

    Full Text Available Introduction and the aim: Marijuana is the most commonly used drug in the world (excluding alcohol and tobacco. According to the literature about 16% of Poles at the age of 16 to 64 years old, at least once have used cannabis. The aim of study was to estimate the popularity of marijuana among students of Polish universities. We also asked questions about respondents’ attitude towards marijuana and opinions about its validation. Material and methods: The study was conducted in 2017 on 132 individuals – 60 men and 72 women. The results were analyzed in STATISTICA 10 at p<0.05. Results:Out of interviewees, 63.6% of them, at least once in their lives, have used marijuana. This is a percentage of up to four times greater than that one given in the literature for the general population. Even 80% of men and 50% of women have tried marijuana at least once in their lives. Students of Catholic University of Lublin reach for marijuana significantly more often than students of Medical University of Lublin. The majority of respondents (53% treats marijuana as a "soft" drug, though up 67.4% believe that it has the addictive potential. More than a half of respondents (56.8% stands for liberalization of rules relevant to marijuana in Poland. Vast majority (70% of respondents believes that marijuana is easily available in Poland. Conclusions: Marijuana is a drug popular among students. The criminalization of drug use in Poland is not effective for the prevention of its use, the majority of respondents believes that marijuana is easily available in Poland. Considering the negative health and social consequences of the current state, it is worth wondering about making changes in the education system and Polish drug law.

  20. Droughts in historical times in Polish territory

    Science.gov (United States)

    Limanowka, Danuta; Cebulak, Elzbieta; Pyrc, Robert; Doktor, Radoslaw

    2015-04-01

    Climate change is one of the key environmental, social and economical issues, and it is also followed by political consequences. Impact of climate conditions on countries' economy is increasingly recognized, and a lot of attention is given, both in the global scale and by the individual national governments. In years 2008-2010, at the Poland -Institute of Meteorology and Water Management-National Research Institute was realized the KLIMAT Project on Impact of climate change on environment, economy and society (changes, effects and methods of reducing them, conclusions for science, engineering practice and economic planning) No. POIG01-03-01-14-011/08. The project was financed by the European Union and Polish state budget in frame of Innovative Economy Operational Programme. A very wide range of research was carried out in the different thematic areas. One of them was "Natural disasters and internal safety of the country (civil and economical)." The problem of drought in Poland was developed in terms of meteorology and hydrology. "Proxy" Data Descriptions very often inform about dry years and seasons, hot periods without precipitation. Analysis of historical material allowed to extract the years that have experienced prolonged periods of high temperatures and rainfall shortages. Weather phenomenon defined as drought belongs to extreme events. This information was very helpful in the process of indexing and thus to restore the course and intensity of climatic elements in the past. The analysis covered the period from year 1000 to modern times. Due to the limited information from the period of 1000-1500 the authors focused primarily on the period from 1500 to 2010. Analysis of the collected material has allowed the development of a highly precise temporal structure of the possible occurrence of dry periods to Polish territory.

  1. A new strategy for the restructuring of Polish energy sector

    International Nuclear Information System (INIS)

    Kozlowski, R.H.; Tallat, J.

    2006-01-01

    In accordance with strategic planning in the military, the leader (in this case the Minister of Economy) is responsible for setting goals, finding the right people to accomplish these goals (those working in the energy sector), analysing the current situation (state of the energy sector) and evaluating available resources (conventional and renewable energy resources). In terms of economic planning (this term is proper for an economy that sets numerous laws and quotas), the goal is to get the Polish economy out of economic slump, which is the result of seventeen years of improper government practices, into a state of prosperity corresponding to no less than the European average. The only way of accomplishing this goal of high economic growth and catching up with highly-developed countries is to develop local inexpensive energy resources. This study focuses on the potential to develop abundant Polish geothermal resources as well as natural gas based co-generation. (author)

  2. [Polish forensic entomology--the past, present and future perspectives].

    Science.gov (United States)

    Skowronek, Rafał; Chowaniec, Czesław

    2010-01-01

    Forensic medicine increasingly more often benefits from the achievements of other biological sciences, which may be used in post mortem investigation. One of them is forensic entomology--the science based on the knowledge about biology of insects preying on cadavers. The objective of this article is to present the history of Polish forensic entomology, its present state and possibilities and directions of further development.

  3. Chemical etching and polishing of InP

    International Nuclear Information System (INIS)

    Kurth, E.; Reif, A.; Gottschalch, V.; Finster, J.; Butter, E.

    1988-01-01

    This paper describes possibilities of several chemical preparations for the selective cleaning of InP surfaces. The investigations of the surface states after the chemical treatment were carried out by means of XPS measurements. A pre-etching with (NH 4 ) 2 S 2 O 8 :H 2 SO 4 :H 2 O and a polishing with 1% bromine in methanol produce optically smooth (100)-and (111) P surfaces free of oxides. (author)

  4. Engaging Youth in the Curriculum Development Process with Technology: The Nebraska State 4-H Youth Curriculum Committee

    Directory of Open Access Journals (Sweden)

    Michelle J. Garwood

    2010-03-01

    Full Text Available Technology is changing the way youth learn and lead. This paper illustrates a successful case study of a program that actively engaged youth in the decision-making process through the use of an online community and virtual conferencing. Synergy was generated when the youth were mentored (virtually and in-person by members of a parallel adult committee. Utilizing technology resources proved to be the key to building a vibrant, innovative and inclusive program that could overcome the barriers of time and travel constraints.

  5. Corporate Politics on Polish Millennials

    Directory of Open Access Journals (Sweden)

    Natalia Roślik

    2017-12-01

    Full Text Available In the very beginning of this particular paper, an author is trying to determine and describe who Millennials actually are. Then, the basis of Millennials definition is analysing corporation’s activity over the past years regarding this age group. The main goal of the thesis is to bring their specific futures out and describe what corporations on Polish job market are doing to encourage them to work in their offices. Especially in Poland within the last years, it is observed that big multinational companies are paying special attention to Millennials and trying to hire them before competitors will do so. As a part of this paper, an author will describe corporate politics and practices on Thomson Reuters and BNY Mellon examples. Within this work, an author is also discussing key features and differences between this generation and Millennials parent’s generation. Additionally, there is a reference to corporate social responsibility concept and work-life balance issues.

  6. Determinants of Polish public debt

    Directory of Open Access Journals (Sweden)

    Tomasz Stryjewski

    2011-12-01

    Full Text Available The crisis, which had its beginning in 2007, turned into the debt crisis of the countries. The examples of Greece, Ireland, Iceland or Spain showed the category of public debt in a new light. Poland, at the turn of 2010/2011 also achieved the upper level of public debt acceptable by the law. In the present situation of the European Union countries being in debt, and even insolvent, the situation in Poland becomes riskier. This article attempts at an empirical verification of the determinants of Polish public debt within 95 months (the data link with the period of time from January 2003 to November 2010. The verification of the main factors which cause the formation of public debt takes place by means of an appropriately verified econometric model.

  7. Zerodur polishing process for high surface quality and high efficiency

    International Nuclear Information System (INIS)

    Tesar, A.; Fuchs, B.

    1992-08-01

    Zerodur is a glass-ceramic composite importance in applications where temperature instabilities influence optical and mechanical performance, such as in earthbound and spaceborne telescope mirror substrates. Polished Zerodur surfaces of high quality have been required for laser gyro mirrors. Polished surface quality of substrates affects performance of high reflection coatings. Thus, the interest in improving Zerodur polished surface quality has become more general. Beyond eliminating subsurface damage, high quality surfaces are produced by reducing the amount of hydrated material redeposited on the surface during polishing. With the proper control of polishing parameters, such surfaces exhibit roughnesses of < l Angstrom rms. Zerodur polishing was studied to recommend a high surface quality polishing process which could be easily adapted to standard planetary continuous polishing machines and spindles. This summary contains information on a polishing process developed at LLNL which reproducibly provides high quality polished Zerodur surfaces at very high polishing efficiencies

  8. Local Party Labor Center in Radzyń Podlaski (1982–1989 – an element of the organization structure of the Polish United Workers' Party, documents creator, archival fonds

    Directory of Open Access Journals (Sweden)

    Dariusz Magier

    2017-05-01

    Full Text Available Local Party Labor Centers were created in January 1982, in connection with reorganization of assignments of the Polish United Workers’ Party in the new socio-political situation after the declaration of martial law in Poland. The article present this element of the complex bureaucratic structure, holding dictatorial authority in the party, by describing its political history and documentary legacy from the archival perspective. The laboratory example is the Local Party Labor Center in Radzyń Podlaski. The author set himself a task to describe what was the role of the Center in the Polish communist party – a formation so characteristic for the last decade of existence of the Party. The LPLCs were not elective statutory bodies of the PUWP, but they were a bureaucratic structure, that served an advisory and coordination function towards basic levels of the communist party. The LPLC in Radzyń Podlaski was one of four such formations created in the Bielsk Podlaski Voivodeship, and its area of action were counties from the period before the administrative reform in 1975. The scope of the Center were district committees of the PUWP situated in Czemierniki, Drelów, Kąkolewnica, Komarówka Podlaska, Międzyrzec Podlaski, Ulan, Wohyń; the Town Committee in Międzyrzec Podlaski and the Town-Distric Committee in Radzyń Podlaski. Archival materials of theLPLC in Radzyń Podlaski were transmitted on September 2, 1992 with documentation created by the County, the District, the Town and the Town-Disctrict Committee from 1950 to 1989. The materials were scattered. In 2007–2008 fonds of this documentation were recognized and in 2011 the materials of the LPLC were arranged and described in the State Archive in Lublin, Branch in Radzyń Podlaski. 

  9. Convergent Polishing: A Simple, Rapid, Full Aperture Polishing Process of High Quality Optical Flats & Spheres

    Science.gov (United States)

    Suratwala, Tayyab; Steele, Rusty; Feit, Michael; Dylla-Spears, Rebecca; Desjardin, Richard; Mason, Dan; Wong, Lana; Geraghty, Paul; Miller, Phil; Shen, Nan

    2014-01-01

    Convergent Polishing is a novel polishing system and method for finishing flat and spherical glass optics in which a workpiece, independent of its initial shape (i.e., surface figure), will converge to final surface figure with excellent surface quality under a fixed, unchanging set of polishing parameters in a single polishing iteration. In contrast, conventional full aperture polishing methods require multiple, often long, iterative cycles involving polishing, metrology and process changes to achieve the desired surface figure. The Convergent Polishing process is based on the concept of workpiece-lap height mismatch resulting in pressure differential that decreases with removal and results in the workpiece converging to the shape of the lap. The successful implementation of the Convergent Polishing process is a result of the combination of a number of technologies to remove all sources of non-uniform spatial material removal (except for workpiece-lap mismatch) for surface figure convergence and to reduce the number of rogue particles in the system for low scratch densities and low roughness. The Convergent Polishing process has been demonstrated for the fabrication of both flats and spheres of various shapes, sizes, and aspect ratios on various glass materials. The practical impact is that high quality optical components can be fabricated more rapidly, more repeatedly, with less metrology, and with less labor, resulting in lower unit costs. In this study, the Convergent Polishing protocol is specifically described for fabricating 26.5 cm square fused silica flats from a fine ground surface to a polished ~λ/2 surface figure after polishing 4 hr per surface on a 81 cm diameter polisher. PMID:25489745

  10. Mirror surface metrology and polishing for AXAF/TMA

    International Nuclear Information System (INIS)

    Slomba, A.; Babish, R.; Glenn, P.

    1985-01-01

    The achievement of the derived goals for mirror surface quality on the Advanced X-ray Astrophysics Facility (AXAF), Technology Mirror Assembly (TMA) required a combination of state-of-the-art metrology and polishing techniques. In this paper, the authors summarize the derived goals and cover the main facets of the various metrology instruments employed, as well as the philosophy and technique used in the polishing work. In addition, they show how progress was measured against the goals, using the detailed error budget for surface errors and a mathematical model for performance prediction. The metrology instruments represented a considerable advance on the state-of-the-art and fully satisfied the error budget goals for the various surface errors. They were capable of measuring the surface errors over a large range of spatial periods, from low-frequency figure errors to microroughness. The polishing was accomplished with a computer-controlled process, guided by the combined data from various metrology instruments. This process was also tailored to reduce the surface errors over the full range of spatial periods

  11. Technological Advances of Robot Assisted Polishing

    DEFF Research Database (Denmark)

    Lazarev, Ruslan; Top, Søren; Grønbæk, Jens

    The efficient polishing of surfaces is very important in mould and die industry. Fine abrasive processes are widely used in industry for the first steps for the production of tools of high quality in terms of finishing accuracy, form and surface integrity. While manufacturing of most components....... In this study, the influence of polishing parameters and type of polishing media on fine abrasive surface finishing is investigated. Experimental study is covering 2D rotational surfaces that is widespread used in mould and dies industry. Application of it is essential for process intelligent control, condition...... monitoring and quality inspection....

  12. Compendium of Materials on Zero-Base Budgeting in the States. 95th Congress; 1st Session. Committee Print.

    Science.gov (United States)

    Congress of the U.S. , Washington, DC. Senate Committee on Government Operations.

    This is a collection of 16 articles on zero-based budgeting (ZBB), dealing primarily with the practice as it occurs in the states. Included is a lengthy report on ZBB practices in the states based on a survey conducted by the National Association of State Budget Officers and the Congressional Research Service. (IRT)

  13. Jewish problem in the Polish Communist Party

    Directory of Open Access Journals (Sweden)

    Cimek Henryk

    2016-12-01

    Full Text Available Jews accounted for approx. 8-10% of the population of the Second Republic and in the communist movement (Polish Communist Party and Polish Communist Youth Union the rate was approx, 30%, while in subsequent years it much fluctuated. The percentage of Jews was the highest in the authorities of the party and in the KZMP. This had a negative impact on the position of the KPP on many issues, especially in its relation to the Second Republic.

  14. Electrolytic polishing system for space age materials

    International Nuclear Information System (INIS)

    Coons, W.C.; Iosty, L.R.

    1976-01-01

    A simple electrolytic polishing technique was developed for preparing Cr, Co, Hf, Mo, Ni, Re, Ti, V, Zr, and their alloys for structural analysis on the optical microscope. The base electrolyte contains 5g ZnCl 2 and 15g AlCl 3 . 6H 2 O in 200 ml methyl alcohol, plus an amount of H 2 SO 4 depending on the metal being polished. Five etchants are listed

  15. Trace element analysis of nail polishes

    International Nuclear Information System (INIS)

    Misra, G.; Mittal, V.K.; Sahota, H.S.

    1999-01-01

    Instrumental neutron activation analysis (INAA) technique was used to measure the concentrations of various trace elements in nail polishes of popular Indian and foreign brands. The aim of the present experiment was to see whether trace elements could distinguish nail polishes of different Indian and foreign brands from forensic point of view. It was found that cesium can act as a marker to differentiate foreign and Indian brands. (author)

  16. Organizing Committee Advisory Committee 187

    Indian Academy of Sciences (India)

    Organizing Committee. V M Datar (Chairman). Bhabha Atomic Research Centre, Mumbai, India. D C Biswas (Convener). Bhabha Atomic Research Centre, Mumbai, India. K Mahata (Secretary). Bhabha Atomic Research Centre, Mumbai, India. Z Ahmed. Bhabha Atomic Research Centre, Mumbai, India. P V Bhagwat.

  17. Experimental Polish-Lithuanian Corpus with the Semantic Annotation Elements

    Directory of Open Access Journals (Sweden)

    Danuta Roszko

    2015-06-01

    Full Text Available Experimental Polish-Lithuanian Corpus with the Semantic Annotation Elements In the article the authors present the experimental Polish-Lithuanian corpus (ECorpPL-LT formed for the idea of Polish-Lithuanian theoretical contrastive studies, a Polish-Lithuanian electronic dictionary, and as help for a sworn translator. The semantic annotation being brought into ECorpPL-LT is extremely useful in Polish-Lithuanian contrastive studies, and also proves helpful in translation work.

  18. PERSPECTIVES OF THE DEVELOPMENT OF AGRICULTURE OF THE RUSSIA IN MODERN TIMES. RESULT OF WORK OF THE COMMITTEE OF THE STATE DUMA ON NATURAL RESOURCES, MANAGEMENT AND ECOLOGY

    Directory of Open Access Journals (Sweden)

    V. I. Kashin

    2016-01-01

    Full Text Available The perspectives of the development of agriculture in Russia in modern times and main results of work of the Committee of the State Duma on Natural Resources, Management and Ecology are presented in the article. For the purpose of food sovereignty, the import ration should not be exceeded 25% from overall volume of food production. The Russian Academy of Agricultural Science worked on the potential of agricultural sector, which has to be the duty-bearer of food supply security of Russia and the source of raw materials for the trade. Up to now, the Russian scientists have developed a lot of competitive varieties and hybrids, widespread commercial introduction of which is able to guarantee of high quality products.

  19. Mechanical properties of self-compacting concrete state-of-the-art report of the RILEM technical committee 228-MPS on mechanical properties of self-compacting concrete

    CERN Document Server

    Schutter, Geert

    2014-01-01

    The State-of-the-Art Report of RILEM Technical Committee 228-MPS on Mechanical properties of Self-Compacting Concrete (SCC) summarizes an extensive body of information related to mechanical properties and mechanical behaviour of SCC. Due attention is given to the fact that the composition of SCC varies significantly. A wide range of  mechanical properties are considered, including compressive strength, stress-strain relationship, tensile and flexural strengths, modulus of elasticity, shear strength, effect of elevated temperature, such as fire spalling and residual properties after fire, in-situ properties, creep, shrinkage, bond properties, and structural behaviour. A chapter on fibre-reinforced SCC is included, as well as a chapter on specialty SCC, such as light-weight SCC, heavy-weight SCC, preplaced aggregate SCC, special fibre reinforced SCC, and underwater concrete.

  20. Laser polishing of additive manufactured Ti alloys

    Science.gov (United States)

    Ma, C. P.; Guan, Y. C.; Zhou, W.

    2017-06-01

    Laser-based additive manufacturing has attracted much attention as a promising 3D printing method for metallic components in recent years. However, surface roughness of additive manufactured components has been considered as a challenge to achieve high performance. In this work, we demonstrate the capability of fiber laser in polishing rough surface of additive manufactured Ti-based alloys as Ti-6Al-4V and TC11. Both as-received surface and laser-polished surfaces as well as cross-section subsurfaces were analyzed carefully by White-Light Interference, Confocal Microscope, Focus Ion Beam, Scanning Electron Microscopy, Energy Dispersive Spectrometer, and X-ray Diffraction. Results revealed that as-received Ti-based alloys with surface roughness more than 5 μm could be reduce to less than 1 μm through laser polishing process. Moreover, microstructure, microhardness and wear resistance of laser-polished zone was investigated in order to examine the thermal effect of laser polishing processing on the substrate of additive manufactured Ti alloys. This proof-of-concept process has the potential to effectively improve the surface roughness of additive manufactured metallic alloy by local polishing method without damage to the substrate.

  1. Conformal polishing approach: Tool footprint analysis

    Directory of Open Access Journals (Sweden)

    José A Dieste

    2016-02-01

    Full Text Available Polishing process is one of the most critical manufacturing processes during a metal part production because it determines the final quality of the product. Free-form surface polishing is a handmade process with lots of rejected parts, scrap generation and time and energy consumption. Two different research lines are being developed: prediction models of the final surface quality parameters and an analysis of the amount of material removed depending on the polishing parameters to predict the tool footprint during the polishing task. This research lays the foundations for a future automatic conformal polishing system. It is based on rotational and translational tool with dry abrasive in the front mounted at the end of a robot. A tool to part concept is used, useful for large or heavy workpieces. Results are applied on different curved parts typically used in tooling industry, aeronautics or automotive. A mathematical model has been developed to predict the amount of material removed in function of polishing parameters. Model has been fitted for different abrasives and raw materials. Results have shown deviations under 20% that implies a reliable and controllable process. Smaller amount of material can be removed in controlled areas of a three-dimensional workpiece.

  2. Interculutral Polish-Chinese QQing

    Directory of Open Access Journals (Sweden)

    Elżbieta Gajek

    2012-12-01

    Full Text Available Working in tandem with the use of information and communication technologies is well-known and frequently used as a method of supporting learning of foreign languages in authentic communication. It is based on a constructivist approach to teaching. In the reported case study Polish and Chinese students discussed in English preprepared topics. The work shows the potential of e-learning at the micro level, as the language and intercultural task is implemented into an academic course without modification of the objectives and learning outcomes of the course. Evaluation carried out at the end of the project indicates that both groups perceived the task as a significant linguistic, cultural and personal experience. They stressed the importance of sharing “culture for culture” as the partner culture was new for most of them. The ability to talk and respond to information which was often strange, from the point of view of their own culture, allowed for learning intercultural competence ̔in action’.

  3. The attractiveness of family medicine among Polish medical students.

    Science.gov (United States)

    Gowin, Ewelina; Horst-Sikorska, Wanda; Michalak, Michał; Avonts, Dirk; Buczkowski, Krzysztof; Lukas, Witold; Korman, Tomasz; Litwiejko, Alicja; Chlabicz, Sławomir

    2014-06-01

    In many developed countries tuning supply and demand of medical doctors is a continuous challenge to meet the ever changing needs of community and individual patients. The long study period for medical doctors creates the opportunity to observe the current career preferences of medical students and evolution in time. To investigate the career choices of Polish students in different stages of their medical education. Medical students at five Polish medical universities were questioned about their career aspirations in the first, third and sixth year. A total of 2020 students were recruited for the survey. Among first year students 17% preferred family medicine as final career option, compared to 20% in the third year, and 30% in the sixth year (significant trend, P family medicine: 71% women versus 62% women in the group with a preference for a non-family medicine orientation (P = 0.008). Medical students rejecting a career as a family doctor stated that the impossibility to work in a hospital environment was the determining factor. The opportunity for professional development seems to be an important determining factor in the choice of a medical specialty in Poland. The proportion of Polish students choosing family medicine increases during their progress in medical education, with one third of students interested in a career in family medicine by year six.

  4. Knowledge of chronic total occlusion among Polish interventional cardiologists.

    Science.gov (United States)

    Bryniarski, Krzysztof L; Zabojszcz, Michał; Dębski, Grzegorz; Marchewka, Jakub; Legutko, Jacek; Surowiec, Sławomir; Siudak, Zbigniew; Żmudka, Krzysztof; Dudek, Dariusz; Bryniarski, Leszek

    2015-01-01

    Chronic total occlusion (CTO) recanalization is indicated in patients with symptoms and evidence of ischemia, but in most cases those types of lesions are still treated medically. In the last few years CTO angioplasty technique has changed dramatically due to considerable advances in techniques and dedicated equipment. An attempt to assess the state of knowledge of technical aspects of CTO angioplasty of coronary arteries among Polish interventional cardiologists. Questionnaire survey performed during two major Polish invasive cardiology workshops. In the study there participated 113 physicians with an average length of work experience of 13 years, most of them cardiologists certified as independent primary operators. The majority of respondents recognized the need of prevention of thrombotic complications through control of activated coagulation time during the CTO procedures. Prevention of renal complications and X-ray protection are also recognized as a significant part of the procedures. The benefits from the use of over-the-wire microcatheters and balloons, the proper choice of dedicated guidewires, contralateral injections and retrograde technique are underestimated. Despite satisfactory knowledge about indications and qualification for the CTO procedure, the awareness of procedural aspects (particularly the retrograde technique) as well as the dedicated CTO equipment among Polish interventional cardiologists is still insufficient.

  5. Validation and cross-cultural adaptation of the Polish version of the Oswestry Disability Index.

    Science.gov (United States)

    Miekisiak, Grzegorz; Kollataj, Marta; Dobrogowski, Jan; Kloc, Wojciech; Libionka, Witold; Banach, Mariusz; Latka, Dariusz; Sobolewski, Tomasz; Sulewski, Adam; Nowakowski, Andrzej; Kiwic, Grzegorz; Pala, Adam; Potaczek, Tomasz; Gierlotka, Maciej

    2013-02-15

    Validation of a translated, culturally adapted questionnaire. To translate and culturally adapt a Polish version of the Oswestry Disability Index (ODI) and to validate its use in Polish patients. The ODI is among the most popular questionnaires used to evaluate back pain-related disability. To our knowledge no validated Polish version of the index was available at the time our study was initiated. The questionnaire was translated and culturally adapted by 2 independent translators and approved by expert committee. Final version was included in the booklet consisting in addition of a previously validated Roland-Morris disability questionnaire, VAS for low back and leg and 3 Likert scale questions (pain medications, pain frequency, disability). It was tested on 169 patients with chronic low back pain, 164 (97%) of them were enrolled, and 84 of 164 (53%) returned the completed retest booklet within 2 to 14 days after the baseline test. There were no differences between the 2 groups in demographic and clinical parameters. Test-retest reliability, internal consistency, and construct validity were investigated. The mean ODI (standard deviation [SD]) was 48.45 (18.94); minimum 2, maximum 94. The Cronbach α for baseline questionnaires (n = 164) was 0.90. Concurrent validity, measured by comparing ODI responses with the results of the Roland-Morris disability questionnaire score was very good (r = 0.607, P disability in Polish-speaking patients with lower back pain.

  6. Marketing Globalisation – Polish Market Experience

    Directory of Open Access Journals (Sweden)

    Robert Nowacki

    2007-09-01

    Full Text Available The beginning of the 21st century has been yielded with an acceleration of transformations occurring in economies of the whole world. These changes relate to all the areas of economic life functioning. The most important manifestation thereof is a reinforcement of competitive phenomena. Among the most important reasons for such a state of affairs, there is mentioned globalisation. The course of its processes forces the organisation operating in the market to undertake adaptive actions. One of them is reorientation of marketing activities. The need to modify the previous marketing concepts results, first of all, from far reaching alterations in the sphere of consumption, just triggered by globalisationís impact. These trends are noticed in all the markets, also in the Polish one. The foreign enterprises operating in it more and more often use the concept of global marketing. This makes us to have reflection on what is the real effectiveness of such actions and what are the possibilities to form oneís competitive position owing to that. The article constitutes an attempt to provide answers to these questions.

  7. 76 FR 17180 - Advisory Committee on International Economic Policy; Notice of Committee Renewal

    Science.gov (United States)

    2011-03-28

    ... provides information and advice on the effective integration of economic interests into overall foreign... DEPARTMENT OF STATE [Public Notice 7327] Advisory Committee on International Economic Policy... Charter of the Advisory Committee on International Economic Policy. The Committee serves in a solely...

  8. 78 FR 43960 - Advisory Committee on the Secretary of State's Strategic Dialogue With Civil Society; Notice of...

    Science.gov (United States)

    2013-07-22

    ... of the Secretary's Foreign Affairs Policy Board. The Board serves the United States Government in a solely advisory capacity concerning major issues and problems in U.S. foreign policy, including... policy; and any other research and analysis of topics raised by the Secretary of State, the Deputy...

  9. 75 FR 66420 - U.S. Department of State Advisory Committee on Private International Law (ACPIL): Online Dispute...

    Science.gov (United States)

    2010-10-28

    ... B2C e-commerce contract disputes on the basis of a state-sponsored cooperative framework and model... International Law (ACPIL): Online Dispute Resolution (ODR) Study Group The Department of State, Office of Legal... upcoming work in UNCITRAL on the development of legal instruments regarding online dispute resolution for...

  10. United States-People's Republic of China nuclear agreement. Hearing before the Committee on Foreign Relations, United States Senate, Ninety-Ninth Congress First Session, October 9, 1985

    International Nuclear Information System (INIS)

    Anon.

    1986-01-01

    Representatives of the diplomatic, arms control, and international departments, as well as DOE and private individuals and organizations testified at a hearing on a proposal for a nuclear agreement with China. The variety of witnesses enabled committee members to consider political, commercial, and legal aspects in addition to non-proliferation issues. Witnesses described the business opportunities, but warned of the need for adequate safeguards in view of China's past policy of favoring proliferation and its history of unstable foreign and domestic policy. DOE Secretary Herrington spoke in favor of the agreement as a opportunity to expand the use of nuclear energy and reduce world dependence on conventional fuels. DOE indicated satisfaction that China shares US proliferation concerns. Insertions of prepared statements for the record follow the testimony of the 13 witnesses

  11. Smoking characteristics of Polish immigrants in Dublin.

    LENUS (Irish Health Repository)

    Kabir, Zubair

    2008-01-01

    BACKGROUND: This study examined two main hypotheses: a) Polish immigrants\\' smoking estimates are greater than their Irish counterparts (b) Polish immigrants purchasing cigarettes from Poland smoke "heavier" (>\\/= 20 cigarettes a day) when compared to those purchasing cigarettes from Ireland. The study also set out to identify significant predictors of \\'current\\' smoking (some days and everyday) among the Polish immigrants. METHODS: Dublin residents of Polish origin (n = 1,545) completed a previously validated Polish questionnaire in response to an advertisement in a local Polish lifestyle magazine over 5 weekends (July-August, 2007). The Office of Tobacco Control telephone-based monthly survey data were analyzed for the Irish population in Dublin for the same period (n = 484). RESULTS: Age-sex adjusted smoking estimates were: 47.6% (95% Confidence Interval [CI]: 47.3%; 48.0%) among the Poles and 27.8% (95% CI: 27.2%; 28.4%) among the general Irish population (p < 0.001). Of the 57% of smokers (n = 345\\/606) who purchased cigarettes solely from Poland and the 33% (n = 198\\/606) who purchased only from Ireland, 42.6% (n = 147\\/345) and 41.4% (n = 82\\/198) were "heavy" smokers, respectively (p = 0.79). Employment (Odds Ratio [OR]: 2.89; 95% CI: 1.25-6.69), lower education (OR: 3.76; 95%CI: 2.46-5.74), and a longer stay in Ireland (>24 months) were significant predictors of current smoking among the Poles. An objective validation of the self-reported smoking history of a randomly selected sub-sample immigrant group, using expired carbon monoxide (CO) measurements, showed a highly significant correlation coefficient (r = 0.64) of expired CO levels with the reported number of cigarettes consumed (p < 0.0001). CONCLUSION: Polish immigrants\\' smoking estimates are higher than their Irish counterparts, and particularly if employed, with only primary-level education, and are overseas >2 years.

  12. Integrating Postsecondary Education Interventions to Help Low-Income Students Succeed. Testimony of Alexander Mayer, Deputy Director, Postsecondary Education, MDRC, Before the California State Assembly Higher Education Committee and the Budget Subcommittee on Education Finance

    Science.gov (United States)

    Mayer, Alexander

    2018-01-01

    This document presents the testimony of MDRC's Alex Mayer, the Deputy Director for Postsecondary Education at MDRC. The three points that Alex Mayer emphasizes in this testimony before the California State Assembly Higher Education Committee and the Budget Subcommittee on Education Finance on integrating postsecondary education interventions to…

  13. Sociology of education, comparative education and social problems: A Polish comment

    Science.gov (United States)

    Zelazkiewicz, Marek

    1981-12-01

    The interaction and co-operation between the sociology of education and comparative education may lead to the realisation of the three basic functions of science: descriptive, explanatory and operative. A presentation of these issues is difficult because of the blurring of lines of division between related scientific disciplines. In the past two decades, Polish sociology has developed without experiencing any serious inner conflicts. Two basic orientations — empirical and humanistic — have co-existed, and the Marxist approach has gradually become more firmly established. The sociological approach applied to the sciences can be viewed as first, the adoption of sociological concepts and theories; and secondly, the application of the methods and techniques used in sociological research. The history of the relationship between the sociology of education and comparative education goes back to the works of J. Chałasiński in the 'thirties: he approached the school as a social institution functioning in a system of social relations and social groups, such as classes, vocational groups, nations and states. The application and impact of the sociological approach is evident in the methodological foundations of pedagogy — as e.g., in the work of Muszyński in 1975 — and also in many specific fields of comparative education. The so-called humanistic orientation and the descriptive function have predominated over empirical studies and the explanatory function in these areas. The 1973 Report of the Committee of Experts, on the state of education in Poland, was the result of co-operation between sociologists end educationists. This enterprise brought about the actualisation of the operative function of both scientific disciplines. However, the situation in Poland today raises new questions needing to be answered.

  14. 78 FR 28594 - Advisory Committee Meeting

    Science.gov (United States)

    2013-05-15

    ... draft competitiveness report, and Ex-Im Bank economic impact policy update. Public Participation: The... EXPORT-IMPORT BANK OF THE UNITED STATES Advisory Committee Meeting ACTION: Notice of Open Meeting of the Advisory Committee of the Export- Import Bank of the United States (Ex-Im Bank). Time and...

  15. 75 FR 26918 - Fishlake Resource Advisory Committee

    Science.gov (United States)

    2010-05-13

    ... requirements, brief participants on Payments to States legislative history, discuss the guidelines for Title II... following business will be conducted: (1) Welcome and Committee introductions; (2) Federal Advisory Committee Act overview and powerpoint; (3) review of Payments to States legislative history and discussion...

  16. 1976 compilation of national nuclear data committees

    International Nuclear Information System (INIS)

    1977-01-01

    This list of currently existing National Nuclear Data Committees, and their memberships, is published with the object of promoting the interaction and enhance the awareness of nuclear data activities in IAEA Member States. The following Member States have indicated the existence of a nuclear data committee in their countries: Bangladesh, Bolivia, Bulgaria, France, Hungary, India, Japan, Romania, Sweden, USSR, United Kingdom, USA, Yugoslavia

  17. APS 3D: a new benchmark in aspherical polishing

    Science.gov (United States)

    Gauch, Daniel; Mikulic, Dalibor; Veit, Christian

    2017-10-01

    The APS 3D system performs polishing and form correction in one step in order to reduce overall process time, reduce the number of polishing steps required and eliminate the need for highly skilled operators while providing a repeatable polishing process. This new 3D Polishing system yields better surface quality, and a better slope error, automatically determining the optimum speeds, feed rates and polish pressures to achieve a deterministic process based on the required quality parameters input by the operator. The process flow is always the same to ensure consistent quality and target quality values are defined before polishing begins.

  18. 76 FR 6171 - U.S. Department of State Advisory Committee on Private International Law (ACPIL): Public Meeting...

    Science.gov (United States)

    2011-02-03

    ... International Law (ACPIL): Public Meeting on Family Law The Department of State, Office of Legal Adviser, Office of Private International Law would like to give notice of a public meeting to discuss preparations for the upcoming Special Commission of the Hague Conference on Private International Law on the 1980...

  19. 76 FR 56865 - U.S. Department of State Advisory Committee on Private International Law (ACPIL): Public Meeting...

    Science.gov (United States)

    2011-09-14

    ... International Law (ACPIL): Public Meeting on Electronic Commerce The Department of State, Office of Legal... future work of Working Group IV (international electronic commerce) of the United Nations Commission on... electronic commerce. The report of the Forty-fourth session of UNCITRAL describes the future work of Group IV...

  20. 76 FR 77584 - U.S. Department of State Advisory Committee on Private International Law (ACPIL): Public Meeting...

    Science.gov (United States)

    2011-12-13

    ... International Law (ACPIL): Public Meeting on Electronic Commerce The Department of State, Office of Legal... electronic transferable records. Working Group IV (international electronic commerce) of the United Nations... electronic transferable records. A report from that meeting, once it is published, should be available at...

  1. 77 FR 23318 - U.S. Department of State Advisory Committee on Private International Law (ACPIL); Online Dispute...

    Science.gov (United States)

    2012-04-18

    ... International Law (ACPIL); Online Dispute Resolution (ODR) Study Group Meeting The Office of Private International Law, Office of the Legal Adviser, Department of State hereby gives notice that the ACPIL Online... charged with the development of legal instruments for resolving both business to business and business to...

  2. 76 FR 65318 - U.S. Department of State Advisory Committee on Private International Law (ACPIL)-Online Dispute...

    Science.gov (United States)

    2011-10-20

    ... International Law (ACPIL)--Online Dispute Resolution Study Group Meeting (ODR) The Department of State, Office of Legal Adviser, Office of Private International Law ACPIL online dispute resolution (ODR) study... development of legal instruments for resolving both business to business and business to consumer cross-border...

  3. Thermal management of metallic surfaces: evaporation of sessile water droplets on polished and patterned stainless steel

    Science.gov (United States)

    Czerwiec, T.; Tsareva, S.; Andrieux, A.; Bortolini, G. A.; Bolzan, P. H.; Castanet, G.; Gradeck, M.; Marcos, G.

    2017-10-01

    This communication focus on the evaporation of sessile water droplets on different states of austenitic stainless steel surfaces: mirror polished, mirror polished and aged and patterned by sputtering. The evolution of the contact angle and of the droplet diameter is presented as a function of time at room temperature. For all the surface states, a constant diameter regime (CCR) is observed. An important aging effect on the contact angle is measured on polished surfaces due to atmospheric contamination. The experimental observations are compared to a quasi-static evaporation model assuming spherical caps. The evolution of the droplet volume as a function of time is almost linear with the evaporation time for all the observed surfaces. This is in accordance with the model prediction for the CCR mode for small initial contact angles. In our experiments, the evaporation time is found to be linearly dependent on the initial contact angle. This dependence is not correctly described by the evaporation model

  4. Polish Academy of Sciences Great Dictionary of Polish [Wielki słownik języka polskiego PAN

    Directory of Open Access Journals (Sweden)

    Piotr Žmigrodzki

    2014-12-01

    Full Text Available The paper describes a lexicographical project involving the development of the newest general dictionary of the Polish language: the Polish Academy of Sciences Great Dictionary of Polish [Wielki słownik języka polskiego PAN]. The project is coordinated by the Institute of Polish Language at the Polish Academy of Sciences and carried out in collaboration with linguists and lexicographers from several other Polish academic centres. The paper offers a brief description of the genesis of the project and the scope of information included in the dictionary, the organisation of work, the life of the dictionary on the Web as well as the plans for the future.

  5. Tobacco Advertising and Children. Hearing before the Committee on Commerce, Science, and Transportation. United States Senate, 105th Congress, 1st Session.

    Science.gov (United States)

    Congress of the U.S., Washington, DC. Senate Committee on Commerce, Science, and Transportation.

    This booklet provides a transcript of the September 16, 1997 hearing before the Committee on Commerce, Science, and Transportation of the U.S. Senate. The hearing concerns tobacco advertising and children. The statements delivered before the committee as well as the prepared statements of several senators are included. These senators are: John…

  6. Experimental Evaluation of Optically Polished Aluminum Panels on the Deep Space Network's 34 Meter Antenna

    Science.gov (United States)

    Vilnrotter, V.

    2011-01-01

    The potential development of large aperture ground?based "photon bucket" optical receivers for deep space communications has received considerable attention recently. One approach currently under investigation is to polish the aluminum reflector panels of 34?meter microwave antennas to high reflectance, and accept the relatively large spotsize generated by state of?the?art polished aluminum panels. Theoretical analyses of receiving antenna pointing, temporal synchronization and data detection have been addressed in previous papers. Here we describe the experimental effort currently underway at the Deep Space Network (DSN) Goldstone Communications Complex in California, to test and verify these concepts in a realistic operational environment. Two polished aluminum panels (a standard DSN panel polished to high reflectance, and a custom designed aluminum panel with much better surface quality) have been mounted on the 34 meter research antenna at Deep?Space Station 13 (DSS?13), and a remotely controlled CCD camera with a large CCD sensor in a weather?proof container has been installed next to the subreflector, pointed directly at the custom polished panel. The point?spread function (PSF) generated by the Vertex polished panel has been determined to be smaller than the sensor of the CCD camera, hence a detailed picture of the PSF can be obtained every few seconds, and the sensor array data processed to determine the center of the intensity distribution. In addition to estimating the center coordinates, expected communications performance can also been evaluated with the recorded data. The results of preliminary pointing experiments with the Vertex polished panel receiver using the planet Jupiter to simulate the PSF generated by a deep?space optical transmitter are presented and discussed in this paper.

  7. Alaska State Legislature

    Science.gov (United States)

    Standing Committees Finance Committees Special Committees Joint Committees Conference Committees Other , administrative support to the Legislature and all divisions, and has the responsibility for accounting, payroll Information Offices within the state. Accounting Santé Lesh, Administrative Operations Manager 465-3852

  8. 15 CFR 2002.1 - Trade Policy Committee Review Group.

    Science.gov (United States)

    2010-01-01

    ... OFFICE OF THE UNITED STATES TRADE REPRESENTATIVE OPERATION OF COMMITTEES § 2002.1 Trade Policy Committee..., December 11, 1971 (15 CFR 2002.1), is abolished and there is hereby established as a subordinate body of...

  9. 76 FR 33700 - Agricultural Policy Advisory Committee for Trade; Renewal

    Science.gov (United States)

    2011-06-09

    ...Pursuant to the Federal Advisory Committee Act, notice is hereby given that the Secretary of Agriculture (Secretary), in coordination with the United States Trade Representative (USTR), has renewed the Agricultural Policy Advisory Committee for Trade (APAC).

  10. Training health and safety committees to use control banding: lessons learned and opportunities for the United States.

    Science.gov (United States)

    Bracker, Anne L; Morse, Timothy F; Simcox, Nancy J

    2009-05-01

    Control banding (CB) is a control-focused risk management model that has received international attention. CB strategies are designed to control workplace chemical exposures after the completion of a qualitative risk assessment. Connecticut was one of the first states to provide training on how to use this control-focused tool. Joint labor/management teams and individuals from 34 workplaces attended a control banding workshop and learned how to use one CB model, the United Kingdom (UK) Health and Safety Executive's Control of Substances Hazardous to Health (COSHH) Essentials Toolkit. After the initial training program the investigators used follow-up workshops, questionnaires, site visit data, and case studies to evaluate the training curriculum and assess the utility and effectiveness of this CB strategy. We found that the model is easily learned, although several areas for improvement were identified. Participants from 10 workplaces used COSHH Essentials to evaluate at least one task. The training curriculum was effective in that the agreement between the exposure variables coded by these workplaces and one of the workshop instructors, a certified industrial hygienist (CIH), were highly concordant. The training curriculum and the model promoted a discussion of risk between workers and managers and resulted in the implementation of improvements in the work environment. The model agreed with both the CIH's and the worksites' qualitative risk assessments 65% of the time, and likely over-controlled for 71% (5/7) of the cases of nonagreement. Feedback from workshop participants benefits the current dialogue on the implications of implementing CB in the United States.

  11. 21 CFR 872.6030 - Oral cavity abrasive polishing agent.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Oral cavity abrasive polishing agent. 872.6030... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6030 Oral cavity abrasive polishing agent. (a) Identification. An oral cavity abrasive polishing agent is a device in paste or powder form...

  12. Chemical Mechanical Polishing Optimization for 4H-SiC

    National Research Council Canada - National Science Library

    Neslen, Craig

    2000-01-01

    .... Preliminary chemical mechanical polishing (CMP) studies of 1 3/8" 4H-SiC wafers were performed in an attempt to identify the polishing parameter values that result in a maximum material removal rate and thus reduce substrate polishing time...

  13. Microbiological flora and nail polish: a brief report.

    Science.gov (United States)

    Rayan, G M; Flournoy, D J; Schlageter, P

    1994-11-01

    Removing nail polish and prosthetic nails from operating room (OR) personnel prior to scrubbing and from patients prior to hand surgery is recommended but not practiced in many hospitals. There is concern that nail polish can act as a vehicle for the transfer of infectious agents. This study was designed to determine the incidence of microbiological flora of nail polish in a clinical setting.

  14. Monitoring of Robot Assisted Polishing through parameters of acoustic emission

    DEFF Research Database (Denmark)

    Lazarev, Ruslan; Top, Søren; Bilberg, Arne

    The polishing process is essential for the surface generation of machine tooling components in advanced manufacturing. While robot assisted polishing is faster and more consistent than manual polishing, it can still consume a significant part of ma- chining time and operator presence time...

  15. Polish Qualitative Sociology: The General Features and Development

    OpenAIRE

    Konecki, Krzysztof Tomasz

    2005-01-01

    The article explores the development of Polish qualitative sociology in Poland by presenting its main intellectual routes and some of the general features of Polish sociology. Romanticism and inductionmethod are crucial elements for the development of this discipline in Poland and contribute to its. unigueness. The role of Florian Znaniecki in creating the Polish qualitative sociology is also underlined. Krzysztof Konecki

  16. Professional Training of Economists at Polish Universities

    Science.gov (United States)

    Ogienko, Olena

    2016-01-01

    Polish experience in professional training of economists at university has been generalized. Structural, content and procedural peculiarities of the training have been defined. It has been proved that key factors for reforming economic education in Poland are globalization, internationalization, integration, technologization and informatization.…

  17. Knowledge Mobilisation in the Polish Education System

    Science.gov (United States)

    Fazlagic, Jan; Erkol, Arif

    2015-01-01

    Poland has made substantial progress in improving the quality of its education system in recent years. This paper aims to describe the situation of the Polish education system from a knowledge management perspective and, to some extent, through innovation policies in education. The many challenges, this paper argues, can be tackled only through…

  18. Sexual Health of Polish Athletes with Disabilities

    Directory of Open Access Journals (Sweden)

    Ryszard Plinta

    2015-06-01

    Full Text Available The purpose of this study was to determine sexual functioning of Polish athletes with disabilities (including paralympians. The study encompassed 218 people with physical disabilities, aged between 18 and 45 (149 men and 69 women. The entire research population was divided into three groups: Polish paralympians (n = 45, athletes with disabilities (n = 126 and non-athletes with disabilities (n = 47. The quality of sexual life of Polish paralympians was measured by using the Polish version of Female Sexual Function Index and International Index of Erectile Function. Clinically significant erectile dysfunctions were most often diagnosed in non-athletes (83.33% with 50% result of severe erectile dysfunctions, followed by athletes and paralympians with comparable results of 56.98% and 54.17% respectively (p = 0.00388. Statistically significant clinical sexual dysfunctions concerned lubrication, orgasm as well as pain domains, and prevailed among female non-athletes (68.42%, 68.42% and 57.89%. Practising sports at the highest level has a favourable effect on the sexuality of men and women with physical disabilities. Men with physical disabilities manifest more sexual disorders than women, an aspect which should be considered by health-care professionals working with people with disabilities.

  19. Directory of Polish Officials: A Reference Aid

    Science.gov (United States)

    1989-04-01

    Jan 86 Deputy Director Mondalski, Janusz Aug 83 Polish Steamship Company (Polski Zegluga Morska ) (PZM) Director Andruczyk, Mieczyslaw Jan...2<> Polski Kosciol Chrzescijan Baptystow 12° Polski Linie Oceaniczne ’"- Polski Towarzystwo Ekonomiczne ’’° Polski Zegluga Morska 102 Polski

  20. Polish students’ opinion about medicinal cannabis

    Directory of Open Access Journals (Sweden)

    Rafał Mazur

    2017-09-01

    Conclusions: Polish students seem to be ready for introduction into medical marijuana and are aware of its therapeutic potential. The majority is in favor of sales in a controlled manner. The task of researchers should be accurate examination of the effectiveness of specific cannabinoids in the treatment of diseases.

  1. An Exploratory Study of the Factors That May Affect Female Consumers’ Buying Decision of Nail Polishes

    Directory of Open Access Journals (Sweden)

    Chen Sun

    2015-06-01

    Full Text Available The objective of this study was to determine what factors female consumers valued more when they buy nail polish. Ninety-eight female consumers participated in a nail polish consumer study at the Sensory Analysis Center, Kansas State University. A questionnaire containing a check-all-that-apply (CATA question, behavior questions and demographic questions was presented to each consumer. In the CATA question, the factors that may affect consumers’ decision to buy a nail polish were asked, including both sensory and non-sensory factors. The frequency in percent for the factors was calculated. Sensory appeal, price and convenience of usage were the top factors that affected consumers’ buying decisions. Consumers valued sensory appeal and convenience of usage; this suggested that a nail polish company’s product development and advertising departments may want to focus on these two areas, primarily. The information presented in this study could help a nail polish company understand more about consumer segmentation and advertising strategy.

  2. 10. national conference of Maria Sklodowska-Curie Polish Radiation Research Society. Abstract of papers

    International Nuclear Information System (INIS)

    1995-01-01

    The 10. national conference of M. Sklodowska-Curie Polish Radiation Research Society has given the opportunity to present novel Polish advisement in all fields of radiation research, e.g. radiation chemistry and biology, radiation processing, environmental study, mathematical modeling and simulation as well as different theoretical study. As a whole it may be treated as a review of actual state of art. The scientific progress since 1992 when the 9. national conference place up to now can be easy assessed on the base of presented material

  3. Patient monitoring in Polish assisted reproductive technology centres

    Directory of Open Access Journals (Sweden)

    Anna Krawczak

    2016-12-01

    Full Text Available In 2014, the Polish non-governmental patient association ‘Our Stork’ (Nasz Bocian introduced the ‘Patient monitoring in ART centres’ research project to gather previously unrecorded information on the situation of infertile people and the provision of assisted reproductive treatment in Poland. When the research project began, assisted reproductive treatment centres were unregulated by the state, a situation that had existed for more than 28 years following the birth of the first Polish test-tube baby in 1987. Patients signed civil contracts, remaining unprotected in terms of safety of treatment and recognition of their rights, and their presumed social position was described by doctors as ‘disciplined patients’ – a reflection of what Michele Foucault described as biopolitics. The research project comprised patient questionnaires (responses from 722 patients provided the basis for the document ‘Patient Recommendations in Infertility Treatment’, analysis of civil contracts and their accuracy in the context of patients’ legal rights in Poland, and in-depth interviews with assisted reproductive treatment centres’ owners, doctors, midwives, and patients to explore patient care. The data reveal that there is a lack of patient-centred care among doctors and medical staff in Poland and that following the passing into law of the 2015 Infertility Act, which introduced state regulation of assisted reproductive treatment centres, the situation for patients worsened.

  4. Surface Roughness and Gloss of Actual Composites as Polished With Different Polishing Systems.

    Science.gov (United States)

    Rodrigues-Junior, S A; Chemin, P; Piaia, P P; Ferracane, J L

    2015-01-01

    This in vitro study evaluated the effect of polishing with different polishing systems on the surface roughness and gloss of commercial composites. One hundred disk-shaped specimens (10 mm in diameter × 2 mm thick) were made with Filtek P-90, Filtek Z350 XT, Opallis, and Grandio. The specimens were manually finished with #400 sandpaper and polished by a single operator using three multistep systems (Superfix, Diamond Pro, and Sof-lex), one two-step system (Polidores DFL), and one one-step system (Enhance), following the manufacturer's instructions. The average surface roughness (μm) was measured with a surface profilometer (TR 200 Surface Roughness Tester), and gloss was measured using a small-area glossmeter (Novo-Curve, Rhopoint Instrumentation, East Sussex, UK). Data were analyzed by two-way analysis of variance and Tukey's test (α=0.05). Statistically significant differences in surface roughness were identified by varying the polishing systems (pGloss was influenced by the composites (pone-step system, Enhance, produced the lowest gloss for all composites. Surface roughness and gloss were affected by composites and polishing systems. The interaction between both also influenced these surface characteristics, meaning that a single polishing system will not behave similarly for all composites. The multistep systems produced higher gloss, while the one-step system produced the highest surface roughness and the lowest gloss of all.

  5. Chemical mechanical glass polishing with cerium oxide: Effect of selected physico-chemical characteristics on polishing efficiency

    Czech Academy of Sciences Publication Activity Database

    Janoš, P.; Ederer, J.; Pilařová, V.; Henych, Jiří; Tolasz, Jakub; Milde, D.; Opletal, T.

    2016-01-01

    Roč. 362, SEP (2016), s. 114-120 ISSN 0043-1648 R&D Projects: GA MŠk(CZ) LM2015073 Institutional support: RVO:61388980 Keywords : Chemical mechanical polishing * Ceria-based polishing powders * Polishing efficienc Subject RIV: CA - Inorganic Chemistry Impact factor: 2.531, year: 2016

  6. Illegal Alien Schoolchildren: Issues in Estimating State-by-State Costs. Report to the Chairman, Committee on the Judiciary, House of Representatives. GAO-04-733

    Science.gov (United States)

    Kingsbury, Nancy R.

    2004-01-01

    To address the potential for estimating the costs of educating illegal alien schoolchildren, this report: identifies major government sources of relevant data; describes a Census Bureau plan for developing new information; and outlines cost-estimation approaches. Data were collected through: a survey of 20 states; outreach through associations of…

  7. Genetic medicine: Polish deontological guidelines and the ethical practice of research studies with children.

    Science.gov (United States)

    Niebrój, Lesław T

    2006-01-01

    The purpose of the article is: (1) to describe deontological guidelines which regulate medical research involving human subjects in Poland, and (2) to clarify the understanding of the fundamental ethical concepts presented in these documents. To do this, two main documents are analysed: (1) the Polish Medical Ethics Code, which was approved by the 7th Extraordinary National Doctors' Convention in September 2003 after a long and difficult process of revision, and (2) the Good Practice in Science, a set of rules concerning scientists, approved by the Committee of Ethics of the Polish Academy of Science in 2001. The pluralism of contemporary ethics and of medical ethics in particular, results in various interpretations of the understanding of the crucial terms used in the deontological statements of these codes. The paper suggests that clarity in the understanding of the terms may be achieved by exploring the 'intellectual' context in which the analysed documents have been appearing and in which they are presently functioning. In order to examine such a context, the following aspects are taken into account: (1) the development of bioethics as a discipline in Poland, (2) international deontological documents which are universally accepted and are in use in Poland, (3) legal regulations regarding medical research involving persons which are currently in force in Poland, and (4) the practice of Polish Institutional Review Boards (IRBs).

  8. Current and Projected National Security Threats to the United States. Hearing before the Select Committee on Intelligence of the United States Senate, One Hundred Eleventh Congress, Second Session

    Science.gov (United States)

    2010-02-02

    trainers see the tribal areas of Paki- stan as less secure and this had led al-Qa’ida to franchise into re- gional components in places such as North...and is still subject to sudden reversal or gradual erosion. The daunting array of challenges fac- ing African nations makes it highly likely in the... closure of Guantanamo and the transfer of detainees abroad. Now, the second paragraph of the letter states the following, ‘‘The professional

  9. 77 FR 4238 - Advisory Committee Management

    Science.gov (United States)

    2012-01-27

    ... DEPARTMENT OF STATE 22 CFR Part 8 RIN 1400-AC64 [Public Notice 7773] Advisory Committee Management.... Appendix, agency heads are required to establish uniform administrative guidelines and management controls... Committee Management. Accordingly, under the authority of 22 U.S.C. 2651a, for the reasons set forth in the...

  10. 75 FR 19608 - Recreation Resource Advisory Committees

    Science.gov (United States)

    2010-04-15

    ...;and investigations, committee meetings, agency decisions and rulings, #0;delegations of authority... tourism official to represent the State; b. A person who represents affected Indian tribes; and c. A... reimbursed for travel and per diem expenses for regularly scheduled committee meetings. All Recreation RAC...

  11. 76 FR 66282 - Army Educational Advisory Committee

    Science.gov (United States)

    2011-10-26

    ... Committee: U.S. Army War College Subcommittee of the Army Education Advisory Committee. Dates of Meeting: November 15, 2011. Place of Meeting: U.S. Army War College, 122 Forbes Avenue, Carlisle, PA, Command... issues and matters related to the continued growth and development of the United States Army War College...

  12. STUDY OF POLISHING AISI 316L WITH STRUCTURED ABRASIVE

    Directory of Open Access Journals (Sweden)

    François GOOSSENS

    2015-05-01

    Full Text Available Finishing process like polishing is usually used to obtain high quality mechanical surface characteristics such as texture and roughness. These operations are mainly handmade and need highly trained operators thus limiting their repeatability and profitability. To optimize the industrialization of the polishing process, it is therefore necessary to modelize the process to built efficient parameter database. The aim of this study is to characterise the polishing of 316L stainless steel with structured abrasive belts. The geometric data of the belts are given, and we then propose a model to determine material removal. An experimental test bench is set up to test this model and characterise the polishing process in terms of forces. It produces samples for different polishing conditions. The different polished surfaces are then analyzed thanks to the roughness and the wettability. Using experimental designs, we are able to validate the proposed model and identify the parameters that influence a polishing operation.

  13. A Study to Determine if Ethics Committees Should be a Decision-Making and Review Mechanism for Matters Relating to No-Code Orders in the Continental United States Army Medical Department Hospitals with over One Hundred Total Operating Beds

    Science.gov (United States)

    1984-08-01

    their role in the hospital. The book Megatrends points out that there are six States which set the pace for national trends. One of these is California...care hospitals but two. Again, one must recall what the book Megatrends says about California and national trends. Another key according to this study...Catholic Hospitals," Ethics Committees Newsletter, Vol 1, No. 2, November 1983, p. 2. 7. R. Veatch, Death, PyiLn and the Biological Revolution, New Haven

  14. [The Polish adaptation of the public speaking anxiety questionnaire].

    Science.gov (United States)

    Chodkiewicz, Jan; Miniszewska, Joanna

    2015-01-01

    The aim of the study was the Polish adaptation of the shortened Public Speaking Anxiety Questionnaire GFER by Spitznagel and co-workers. GFER is a self-assessment method which consists of 16 statements and is designed to assess emotions, physiological reactions, and thoughts that appear in a situation of public speaking. GFER was used to examine 320 students from Lodz's universities. The State/Trait Anxiety Inventory - STAI by Spielberger, The Hospital Anxiety and Depression Scale by Zigmunt and Snaith and TCI by Cloninger were also used. The Polish version of GFER is a reliable and valid tool. The factor structure is similar to the original structure. As a result of the conducted analyses, there was obtained the 9-item version of the tool, which has a 2-factor structure - factor I: emotional and physiological reactions, factor II: worrying. The results obtained with GFER present a statistically significant correlation with other measures of anxiety and with the dimension of temperament: harm avoidance. The obtained results indicate that GFER may be used in both scientific research and therapeutic practice.

  15. Professional activity of Polish peri- and postmenopausal women.

    Science.gov (United States)

    Żołnierczuk-Kieliszek, Dorota; Janiszewska, Mariola; Mielniczuk, Agata; Dziedzic, Małgorzata A; Firlej, Ewelina

    2016-11-01

    The menopausal transition as one of the stages in women's life can bring many ailments which complicate the accomplishment of professional duties. The situation of women on the Polish job market is determined by many barriers and stereotypes which impede women's access to jobs and professional promotions. The aim of the study was to estimate the professional status and job satisfaction of women aged 40-65. The research was carried out by a survey method, a poll technique in the period from January to March 2016. An original questionnaire consisting of 35 questions was used as a research tool. The analysis of obtained results shows that the arithmetic mean of the age of women in full-time employment was 51.84 years whereas the arithmetic mean of the age of women in part-time or seasonal employment was 52.64. Women aged 45-60 were characterised by a significantly lower job satisfaction than women over 60 years of age. The highest percentage of women in full-time employment lived in large cities. The financial situation of working women determined their job satisfaction. Well-off respondents were more pleased with their jobs than women in a worse financial situation. There is a strong need of education about counteraction of gender and age discrimination on the Polish labour market. The struggle against discrimination requires support on each level of the state administration through the implementation of numerous regulations facilitating the final period and resumption of women's professional activity.

  16. Activities of the research committee

    Energy Technology Data Exchange (ETDEWEB)

    Hasegawa, A.; Shirai, T.; Nakagawa, M.; Osugi, T.; Ikeda, Y.; Ishida, T.; Shimazaki, J. [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2000-01-01

    The department of Nuclear Energy System serves as a secretarial of the following four research committees organized by JAERI; Japanese Nuclear Data Committee, Atomic and Molecular Data Research Committee, Research Committee on Reactor Physics and Research Committee on Marine Reactors. The purpose and the expected task of each committee are summarized here. The detailed activities of each committee are presented in this paper. (author)

  17. Emissions from the Polish power industry

    International Nuclear Information System (INIS)

    Uliasz-Bochenczyk, Alicja; Mokrzycki, Eugeniusz

    2007-01-01

    Poland is a country where power and heat energy production is based on conventional fuel combustion, above all hard coal and lignite. In power plants and combined heat and power plants, fossil fuel combustion results in emitting to the atmosphere first of all SO 2 , NO x , CO, particulate matter, greenhouse gases for instance N 2 O and CO 2 . For many years the Polish power industry has tried to reduce the emission of air contaminants to the atmosphere. The reduction is feasible on account of various methods of emission reduction, which have been advanced and applied for many years. The paper presents conventional fuels used in the Polish professional power industry, as well as the principal emission types occurring there for the last 10 years and the undertaken reduction measures

  18. Chemical polishing of epitoxial silicon wafer

    International Nuclear Information System (INIS)

    Osada, Shohei

    1978-01-01

    SSD telescopes are used for the determination of the kind and energy of charged particles produced by nuclear reactions, and are the equipments combining ΔE counters and E counters. The ΔE counter is a thin SSD which is required to be thin and homogeneous enough to get the high resolution of measurement. The SSDs for ΔE counters have so far been obtained by polishing silicon plates mechanically and chemically or by applying electrolytic polishing method on epitaxial silicon wafers, but it was very hard to obtain them. The creative etching equipment and technique developed this time make it possible to obtain thin SSDs for ΔE counters. The outline of the etching equipment and its technique are described in the report. The etching technique applied for the silicon films for ΔE counters with thickness of about 10 μm was able to be experimentally established in this study. (Kobatake, H.)

  19. Polish normalization of the Body Esteem Scale

    Directory of Open Access Journals (Sweden)

    Małgorzata Lipowska

    2014-02-01

    Full Text Available Background Physical attractiveness plays an important part in one’s social functioning. The interest in one’s own appearance have been documented as widespread among the female population, but over the recent years it is more and more often emphasized that concentrating on body appearance concerns men as well. Franzoi and Shields (1984 created the Body Esteem Scale which allows to qualify the subject’s attitude towards his or her own body. The aim of the study was to create a Polish version of the Body Esteem Scale along with the norms for age and sex clusters. Participants and procedure The normalization sample consisted of 4298 participants: 1865 women aged 16 to 80 (M = 29.92; SD = 12.85 and 2433 men aged 16 to 78 (M = 28.74; SD = 11.50. Education levels among the participants were also controlled for. In order to create a Polish version of the Body Esteem Scale, translation was adopted as the adaptation strategy. Like the original one, the Polish scale comprises 35 items grouped into three gender specific subscales. The subscales for women include Sexual Attractiveness, Weight Concern, and Physical Condition, whereas the body esteem of is examined with regards to Physical Attractiveness, Upper Body Strength, and Physical Condition. Results Reliability of subscales was high both for females (Cronbach’s alpha from 0.80 to 0.89 and males (Cronbach’s alpha from 0.85 to 0.88. The given coefficients of reliability cover the original division into subscales adopted by the authors of BES. Conclusions We confirmed high reliability of the Polish version of the Body Esteem Scale, thus we recommend it as a diagnostic tool. Created norms allowed to refer results obtained in the course of research carried out on people with various disorders (e.g. eating disorders or body dysmorphic disorder with population data for corresponding age brackets.

  20. ROUGHNESS ANALYSIS OF VARIOUSLY POLISHED NIOBIUM SURFACES

    Energy Technology Data Exchange (ETDEWEB)

    Ribeill, G.; Reece, C.

    2008-01-01

    Niobium superconducting radio frequency (SRF) cavities have gained widespread use in accelerator systems. It has been shown that surface roughness is a determining factor in the cavities’ effi ciency and maximum accelerating potential achievable through this technology. Irregularities in the surface can lead to spot heating, undesirable local electrical fi eld enhancement and electron multipacting. Surface quality is typically ensured through the use of acid etching in a Buffered Chemical Polish (BCP) bath and electropolishing (EP). In this study, the effects of these techniques on surface morphology have been investigated in depth. The surface of niobium samples polished using different combinations of these techniques has been characterized through atomic force microscopy (AFM) and stylus profi lometry across a range of length scales. The surface morphology was analyzed using spectral techniques to determine roughness and characteristic dimensions. Experimentation has shown that this method is a valuable tool that provides quantitative information about surface roughness at different length scales. It has demonstrated that light BCP pretreatment and lower electrolyte temperature favors a smoother electropolish. These results will allow for the design of a superior polishing process for niobium SRF cavities and therefore increased accelerator operating effi ciency and power.

  1. 7 CFR 929.125 - Committee review procedures.

    Science.gov (United States)

    2010-01-01

    ... MASSACHUSETTS, RHODE ISLAND, CONNECTICUT, NEW JERSEY, WISCONSIN, MICHIGAN, MINNESOTA, OREGON, WASHINGTON, AND LONG ISLAND IN THE STATE OF NEW YORK Rules and Regulations § 929.125 Committee review procedures... Committee within 30 days after receipt of the Committee's determination of sales history, a request for a...

  2. 50 CFR 453.06 - Additional Committee powers.

    Science.gov (United States)

    2010-10-01

    ... ADMINISTRATION, DEPARTMENT OF COMMERCE); ENDANGERED SPECIES COMMITTEE REGULATIONS ENDANGERED SPECIES EXEMPTION PROCESS ENDANGERED SPECIES COMMITTEE § 453.06 Additional Committee powers. (a) Secure information. Subject... Section 453.06 Wildlife and Fisheries JOINT REGULATIONS (UNITED STATES FISH AND WILDLIFE SERVICE...

  3. Effects of polishing procedures on color stability of composite resins

    Directory of Open Access Journals (Sweden)

    Ahmet Umut Güler

    2009-04-01

    Full Text Available The purpose of this study was to investigate the effect of different polishing methods on color stability of posterior, universal and nanohybrid composite resin restorative materials upon exposure to a staining agent. Twenty-five specimens were prepared for each of 5 different composite resins (Filtek Z250, Filtek P60, Quadrant LC, Grandio and Filtek Supreme. Specimens were divided into 5 groups and different polishing procedures, including polishing discs (Pd, polishing discs then diamond polishing paste (PdP, polishing discs then a liquid polishing system (Biscover (PdB, and combinations of these (PdPB were used. Unpolished specimens served as the control (C. The specimens were stored for 48 h in a coffee solution. The color of all specimens was measured before and after exposure with a colorimeter, and total color change (DE* were calculated. The data were analyzed with a two-way ANOVA and the means were compared by Tukey HSD test (a=0.05. The lowest color difference was observed in the groups PdP and C, while the highest color difference was observed in PdPB, and PdB. When comparing the five different restorative materials, no significant difference was observed between FiltekP60 and FiltekZ250, and these materials demonstrated significantly less color change than Quadrant LC and the nanohybrid materials (Grandio, Filtek Supreme. The posterior (Filtek P60 and universal (Filtek Z250 composite resin restorative materials, which do not contain tetraethyleneglycol dimethacrylate (TEGDMA, were found to be less stainable than the nanohybrid (Grandio, Filtek Supreme and universal (Quadrant LC composite resins, which contain TEGDMA. The use of diamond polishing paste after polishing with polishing discs significantly decreased staining when compared to the groups that used polishing discs alone, for all restorative materials tested. The highest color change values were obtained for the specimens that were polished with the Biscover liquid polish

  4. Wladimir Krzyzanowski, 123 Polish Hero of the Civil War in the USA

    Directory of Open Access Journals (Sweden)

    PIYUK T.G.

    2014-09-01

    Full Text Available The article is dedicated to the young Polish revolutionist Wladimir Krzyzanowski who emigrated from Great Poland to the US after failed uprising in 1846 against Prussia in order to avoid possible arrest. He went to Hamburg, Germany and sailed from there to the United States.W. Krzyzanowski managed to become a successful and prosperous businessman and politician, and he was lucky in his personal life, he married a girl with a name and a significant dowry. He considered slavery not only anachronistic, but also a disgrace to the young state, and at the same time, he admired American democracy and American people. In Washington he recruited the company of Polish immigrants which became one of the first companies of Union Soldiers. Krzyzanowski then moved his company to New York and enlisted more immigrants and soon became a Colonel of the 58th Infantry Division, listed in the official Army Register as the “Polish Legion”. He participated in the Civil War battles of Cross-Keys, Bull Run, Chancellorsville, and Gettysburg. “Polish Legion”, led by Krzyzanowski, made himself famous in the main battle at Gettysburg. Subsequently, the memorial of granite was erected to legion in the immediate vicinity of the city.The author’s attention was attracted by the eccentric personality of the Pole, known in Poland and in America. In her work she explores Krzyzanowski’s life and service to the American people

  5. Fusion Policy Advisory Committee (FPAC)

    International Nuclear Information System (INIS)

    1990-09-01

    This document is the final report of the Fusion Policy Advisory Committee. The report conveys the Committee's views on the matters specified by the Secretary in his charge and subsequent letters to the Committee, and also satisfies the provisions of Section 7 of the Magnetic Fusion Energy Engineering Act of 1980, Public Law 96-386, which require a triennial review of the conduct of the national Magnetic Fusion Energy program. Three sub-Committee's were established to address the large number of topics associated with fusion research and development. One considered magnetic fusion energy, a second considered inertial fusion energy, and the third considered issues common to both. For many reasons, the promise of nuclear fusion as a safe, environmentally benign, and affordable source of energy is bright. At the present state of knowledge, however, it is uncertain that this promise will become reality. Only a vigorous, well planned and well executed program of research and development will yield the needed information. The Committee recommends that the US commit to a plan that will resolve this critically important issue. It also outlines the first steps in a development process that will lead to a fusion Demonstration Power Plant by 2025. The recommended program is aggressive, but we believe the goal is reasonable and attainable. International collaboration at a significant level is an important element in the plan

  6. Pesticide Advisory Committees and Regulatory Partners

    Science.gov (United States)

    This site will provide all stakeholders, including the general public, with access to information about meetings of advisory committees, and how we work with state, territory, and tribal government partners.

  7. Evaluation and Reauthorization of the Special Supplemental Food Program for Women, Infants, and Children (WIC). Hearings before the Committee on Agriculture, Nutrition, and Forestry, United States Senate; and the Subcommittee on Nutrition of the Committee on Agriculture, Nutrition, and Forestry, United States Senate. Ninety-Eighth Congress Second Session, March 15 and April 9, 1984.

    Science.gov (United States)

    Congress of the U.S., Washington, DC. Senate Committee on Agriculture, Nutrition, and Forestry.

    This document records hearings before the U.S. Senate Committee on Agriculture, Nutrition, and Forestry and its sub-committee on Nutrition. The hearings, dated March 15 and April 9, 1984, were conducted in order to evaluate and reauthorize the special supplemental food program for Women, Infants and Children (WIC), due to expire in 1984. Testimony…

  8. The Audit Committee. AGB Effective Committee Series

    Science.gov (United States)

    Staisloff, Richard L.

    2011-01-01

    This publication is part of an Association of Governing Boards of Universities and Colleges (AGB) series devoted to strengthening the role of key standing committees of governing boards. While there is no optimum committee system for institutions of higher education, certain principles, practices, and procedures prevail. The best practices…

  9. The Investment Committee. Effective Committees. Board Basics.

    Science.gov (United States)

    Biggs, John H.

    1997-01-01

    The investment committee of the college or university governing board is charged with determining, overseeing, and assessing the policies and processes by which institutional funds are invested. The committee has fiduciary duty to ensure that the terms of investment of donors' gifts are met and to maximize investment returns within an appropriate…

  10. Work Engagement – A Systematic Review of Polish Research

    Directory of Open Access Journals (Sweden)

    Pollak Anita

    2017-06-01

    Full Text Available Over the past decade work engagement has gained both business and academia attention. With growing number of studies and meta-analyses the concept of work engagement is one of the pillars of positive work and organizational psychology. This systematic review presents the current state of research on work engagement in Poland. Results confirmed that work-engagement studies have not yet reached the threshold to conduct meta-analysis. The review of measurement methods and synthesis of findings allows to identify strengths and gaps in Polish studies. Discussion of limitations and biases in current research is accompanied with urge to overcome them and develop thriving stream of research on work engagement.

  11. The first Polish conference: Special glasses and amorphous materials. Introduction

    International Nuclear Information System (INIS)

    1993-01-01

    The present issue brings a collection of papers submitted to the 1. Polish Conference on special glasses and amorphous materials, held on June 1993 at the University of Mining and Metallurgy in Cracow. It was a survey of the research topics and attainments of the research teams working in this referring to the nature of the glassy state of the matter and the relation between glasses and other amorphous materials, properties of these materials as well as modern methods of their synthesis both at low and high temperatures. Some of the results presented at the Conference have already found application in industry. Here belong, among others, the works on optic fibres. Several new materials which have been recently elaborated may also find interesting and new practical application. (author)

  12. Tribological approach to study polishing of road surface under traffic

    OpenAIRE

    KANE, Malal; DO, Minh Tan

    2007-01-01

    The polishing phenomenon of road pavements under the vehicle traffic constitutes the main mechanism inherent to the loss of skid resistance over time. A better understanding of this phenomenon would allow an improvement of road safety. This study comprises a review of laboratory test and a model simulating the polishing of road surfaces. The laboratory test uses a polishing machine so called 'Wehner-Schulze' which can reproduce the evolution of the road texture from specimens taken directly f...

  13. Polish Phoneme Statistics Obtained On Large Set Of Written Texts

    Directory of Open Access Journals (Sweden)

    Bartosz Ziółko

    2009-01-01

    Full Text Available The phonetical statistics were collected from several Polish corpora. The paper is a summaryof the data which are phoneme n-grams and some phenomena in the statistics. Triphonestatistics apply context-dependent speech units which have an important role in speech recognitionsystems and were never calculated for a large set of Polish written texts. The standardphonetic alphabet for Polish, SAMPA, and methods of providing phonetic transcriptions are described.

  14. Polish Qualitative Sociology: The General Features and Development

    OpenAIRE

    Konecki, Krzysztof Tomasz; Kacperczyk, Anna; Marciniak, Łukasz

    2005-01-01

    Forum Qualitative Sozialforschung / Forum: Qualitative Social Research,2005, 6(3) The article explores the development of Polish qualitative sociology in Poland by presenting its main intellectual routes and some of the general features of Polish sociology. Romanticism and inductionmethod are crucial elements for the development of this discipline in Poland and contribute to its. unigueness. The role of Florian Znaniecki in creating the Polish qualitative sociology is also underlined.

  15. 11 CFR 109.33 - May a political party committee assign its coordinated party expenditure authority to another...

    Science.gov (United States)

    2010-01-01

    ... Elections FEDERAL ELECTION COMMISSION GENERAL COORDINATED AND INDEPENDENT EXPENDITURES (2 U.S.C. 431(17... 11 Federal Elections 1 2010-01-01 2010-01-01 false May a political party committee assign its... committee includes a subordinate committee of a State committee and includes a district or local committee...

  16. STANDING CONCERTATION COMMITTEE

    CERN Multimedia

    2003-01-01

    ORDINARY MEETING ON 29 SEPTEMBER 2003 Original: English This meeting was devoted to the main topics summarised below. 1 Follow-up from the meetings of TREF and the Finance Committee in September 2003 The last meeting of TREF had been devoted to presentations and clarifications on the 5-Yearly Review process. The content and planning of the 2005 Review are matters for the next Management, which will be presented to TREF next year. Underlining that due account has to be taken of the limited resources available to conduct such an exercise, the Staff Association stated that it looks forward to the concertation process at the SCC in preparing the next 5-Yearly Review to define an optimum set of topics in order to ensure that CERN can attract, retain and motivate the personnel that it needs to remain a centre of excellence. The Chairman of the SCC recalled that an information document on the Cost-Variation Index for 2004 had been transmitted to the Finance Committee last September and that complete information o...

  17. Advisory Committee Handbook.

    Science.gov (United States)

    Black Hawk Coll., Moline, IL.

    An advisory committee is generally comprised of persons outside the education profession who have specialized knowledge in a given area. The committee advises, makes recommendations, and gives service to the college and its students, instructors, and administrators. At Black Hawk College, there are four types of advisory committees: community,…

  18. Assessing operability of a novel polisher arrangement using MMS

    International Nuclear Information System (INIS)

    Shor, S.W.W.

    1987-01-01

    A condensate polisher is intended to remove both particulate matter and ionic material from the condensate. Condensate polishers have normally been placed directly in the condensate system downstream of the condensate pumps. This inline location has certain disadvantages. These disadvantages are discussed. Placing the polisher in a sidestream location, where water is removed from the condensate system, pumped through the polisher, and then returned to the condensate system provides a solution to these disadvantages. Several possible types of sidestream installations is described. This has a polisher taking unpolished condensate from one compartment from one compartment of a divided hotwell in a specially modified condenser and returning polished condensate to the other compartment. The polisher is supplied by its own dedicated pumps, which have a head requirement sufficient only to overcome the pressure drop through the polisher circuit at a flow rate of 110% of maximum condensate flow. This concept is very attractive but has not yet been tested even though it is being installed in several new units. A simulation was, therefore, performed using MMS to provide confidence that this particular sidestream polisher arrangement was operationally viable

  19. [Józef Heller-one of organizers of Polish biochemistry in 1942-1973].

    Science.gov (United States)

    Zarebska, Zofia

    2011-01-01

    The article commemorates the activity of Józef Heller starting in 1921 with Jakub Parnas's group in Lvov which investigated the phosphorolysis of glycogen. The unknown events of His biography were disclosed, like military service in the Piłsudski's Legions at the rebirth of the Polish State and, subsequently, during the Nazi occupation of Poland--participation in the clandestine teaching of medical students. In the post-war times Józef Heller undertook teaching of medical students in Wrocław and next in Warsaw. In 1954 He begun to organize the Institute of Biochemistry and Biophysics of the Polish Academy of Sciences--it now continues its activity. Professor Heller initiated the publication in Poland of three major biochemical journals, including Postepy Biochemii (1954). Thanks to His leadership the first Polish Medical Dictionary was published (1981). The article summarizes the pursuit of Józef Heller in various branches of academic life, which were and still are appreciated by subsequent generations of Polish biochemists.

  20. Slower nicotine metabolism among postmenopausal Polish smokers.

    Science.gov (United States)

    Kosmider, Leon; Delijewski, Marcin; Koszowski, Bartosz; Sobczak, Andrzej; Benowitz, Neal L; Goniewicz, Maciej L

    2018-06-01

    A non-invasive phenotypic indicator of the rate of nicotine metabolism is nicotine metabolite ratio (NMR) defined as a ratio of two major metabolites of nicotine - trans-3'-hydroxycotinine/cotinine. The rate of nicotine metabolism has important clinical implications for the likelihood of successful quitting with nicotine replacement therapy (NRT). We conducted a study to measure NMR among Polish smokers. In a cross-sectional study of 180 daily cigarette smokers (42% men; average age 34.6±13.0), we collected spot urine samples and measured trans-3'-hydroxycotinine (3-HC) and cotinine levels with LC-MS/MS method. We calculated NMR (molar ratio) and analyzed variations in NMR among groups of smokers. In the whole study group, an average NMR was 4.8 (IQR 3.4-7.3). The group of women below 51 years had significantly greater NMR compared to the rest of the population (6.4; IQR 4.1-8.8 vs. 4.3; IQR 2.8-6.4). No differences were found among group ages of male smokers. This is a first study to describe variations in nicotine metabolism among Polish smokers. Our findings indicate that young women metabolize nicotine faster than the rest of population. This finding is consistent with the known effects of estrogen to induce CYP2A6 activity. Young women may require higher doses of NRT or non-nicotine medications for most effective smoking cessation treatment. Copyright © 2017 Institute of Pharmacology, Polish Academy of Sciences. Published by Elsevier B.V. All rights reserved.

  1. Plasma electrolytic polishing of metalized carbon fibers

    Directory of Open Access Journals (Sweden)

    Falko Böttger-Hiller

    2016-02-01

    Full Text Available Efficient lightweight structures require intelligent materials that meet versatile functions. Especially, carbon-fiber-reinforced polymers (CFRPs are gaining relevance. Their increasing use aims at reducing energy consumption in many applications. CFRPs are generally very light in weight, while at the same time being extremely stiff and strong (specific strength: CFRPs: 1.3 Nm kg–1, steel: 0.27 Nm kg–1; specific stiffness: CFRPs: 100 Nm kg–1, steel: 25 Nm kg–1. To increase performance and especially functionality of CFRPs, the integration of microelectronic components into CFRP parts is aspired. The functionalization by sensors, actuators and electronics can enable a high lightweight factor and a new level of failure-safety. The integration of microelectronic components for this purpose requires a working procedure to provide electrical contacts for a reliable connection to energy supply and data interfaces. To overcome this challenge, metalized carbon fibers are used. Metalized fibers are, similar to the usual reinforcing fibers, able to be soldered and therefore easy to incorporate into CFRPs. Unfortunately, metalized fibers have to be pre-treated by flux-agents. Until now, there is no flux which is suitable for mass production without destroying the polymer of the CFRP. The process of plasma electrolytic polishing (PeP could be an option, but is so far not available for copper. Thus, in this study, plasma electrolytic polishing is transferred to copper and its alloys. To achieve this, electrolytic parameters as well as the electrical setup are adapted. It can be observed that the gloss and roughness can be adjusted by means of this procedure. Finally, plasma electrolytic polishing is used to treat thin copper layers on carbon fibers.

  2. Terminology extraction from medical texts in Polish.

    Science.gov (United States)

    Marciniak, Małgorzata; Mykowiecka, Agnieszka

    2014-01-01

    Hospital documents contain free text describing the most important facts relating to patients and their illnesses. These documents are written in specific language containing medical terminology related to hospital treatment. Their automatic processing can help in verifying the consistency of hospital documentation and obtaining statistical data. To perform this task we need information on the phrases we are looking for. At the moment, clinical Polish resources are sparse. The existing terminologies, such as Polish Medical Subject Headings (MeSH), do not provide sufficient coverage for clinical tasks. It would be helpful therefore if it were possible to automatically prepare, on the basis of a data sample, an initial set of terms which, after manual verification, could be used for the purpose of information extraction. Using a combination of linguistic and statistical methods for processing over 1200 children hospital discharge records, we obtained a list of single and multiword terms used in hospital discharge documents written in Polish. The phrases are ordered according to their presumed importance in domain texts measured by the frequency of use of a phrase and the variety of its contexts. The evaluation showed that the automatically identified phrases cover about 84% of terms in domain texts. At the top of the ranked list, only 4% out of 400 terms were incorrect while out of the final 200, 20% of expressions were either not domain related or syntactically incorrect. We also observed that 70% of the obtained terms are not included in the Polish MeSH. Automatic terminology extraction can give results which are of a quality high enough to be taken as a starting point for building domain related terminological dictionaries or ontologies. This approach can be useful for preparing terminological resources for very specific subdomains for which no relevant terminologies already exist. The evaluation performed showed that none of the tested ranking procedures were

  3. FAILED STATE

    African Journals Online (AJOL)

    Dr. Miles R. Cone

    The state and society are mutual symbionts as far as their political, economic and social relationships .... consequences have played a role in the African state's deviation from the 'strong state' ideal. .... International Olympic Committee (IOC).

  4. Original article Multidimensional versus unidimensional models of emotional contagion: the Emotional Contagion Scale in a Polish sample

    Directory of Open Access Journals (Sweden)

    Monika Wróbel

    2014-07-01

    Full Text Available Background The Emotional Contagion Scale (ECS measures individual differences in susceptibility to catching emotions expressed by others. Although initially the scale was reported to have a unidimensional structure, recent validation studies have suggested that the concept of emotional contagion is multidimensional. The aim of the study was therefore to test whether the structure of the ECS in a Polish sample corresponds with that observed for other non-English speaking populations. Participants and procedure The scale, translated into Polish, was completed by 633 university students in four independent samples. To investigate the factor structure of the ECS, confirmatory factor analyses of five alternative models were conducted. Results The results supported a multifaceted solution, which confirmed that susceptibility to emotional contagion may be differentiated not only across positive vs. negative states but also across discrete emotions. Moreover, the verification of internal consistency, test-retest reliability and construct validity of the Polish version indicated that its parameters are acceptable and comparable with the characteristics of other adaptations. Conclusions The Polish ECS, together with other adaptations of the scale, shows that the construct developed in the United States can be successfully measured in other cultural contexts. Thus, the Polish version can be treated as a useful tool for measuring individual differences in susceptibility to emotional contagion.

  5. Radioactive waste. The Government's response to the Environment Committee's report. Presented to Parliament by the Secretary of State for the Environment, the Secretary of State for Scotland, and the Secretary of State for Wales

    International Nuclear Information System (INIS)

    1986-01-01

    The Environment Committee's report on radioactive waste (published 12 March 1986) was comprehensive and made a number of recommendations each of which has been considered by the Government. Its first stage report was published in May in which the Government commented on the recommendations directly relevant to the proposal to develop a near surface facility for the disposal of radioactive waste. This response incorporates that material, replies to the remaining recommendations and defines the Government's overall strategy for the disposal of all levels of radioactive waste. Its recommendations are considered, including specific ones about the THORP plant at Sellafield and the Drigg near-surface disposal site and more general points about storage versus reprocessing for spent fuels, seabed disposal of intermediate level waste disposal etc. (UK)

  6. India-Pakistan nuclear issues. Hearing before the Committee on Foreign Relations, United States Senate, Ninety-Sixth Congress, second session March 18, 1980

    International Nuclear Information System (INIS)

    Anon.

    1980-01-01

    The proceedings of Hearings on nuclear issues between the US, India and Pakistan are included in this volume. The committee wants to explore with the administration precisely where matters stand with India and Pakistan on nuclear issues, what policy alternatives the administration may be considering with respect to those issues, and how the administration intends to relate its actions on nuclear matters to other US foreign policy issues

  7. 77 FR 36250 - Recreation Resource Advisory Committees

    Science.gov (United States)

    2012-06-18

    ..., Non-motorized Outfitter and Guide Recreation, Local Environmental, State Tourism, Local Government...: a. A State tourism official to represent the State; b. A person who represents affected Indian... and per diem expenses for regularly scheduled committee meetings. All Recreation RAC meetings are open...

  8. Professional activity of Polish peri- and postmenopausal women

    Directory of Open Access Journals (Sweden)

    Dorota Żołnierczuk-Kieliszek

    2016-09-01

    Full Text Available Introduction: The menopausal transition as one of the stages in women’s life can bring many ailments which complicate the accomplishment of professional duties. The situation of women on the Polish job market is determined by many barriers and stereotypes which impede women’s access to jobs and professional promotions. Material and methods : The aim of the study was to estimate the professional status and job satisfaction of women aged 40-65. The research was carried out by a survey method, a poll technique in the period from January to March 2016. An original questionnaire consisting of 35 questions was used as a research tool. Results: The analysis of obtained results shows that the arithmetic mean of the age of women in full-time employment was 51.84 years whereas the arithmetic mean of the age of women in part-time or seasonal employment was 52.64. Women aged 45-60 were characterised by a significantly lower job satisfaction than women over 60 years of age. The highest percentage of women in full-time employment lived in large cities. The financial situation of working women determined their job satisfaction. Well-off respondents were more pleased with their jobs than women in a worse financial situation. Conclusions : There is a strong need of education about counteraction of gender and age discrimination on the Polish labour market. The struggle against discrimination requires support on each level of the state administration through the implementation of numerous regulations facilitating the final period and resumption of women’s professional activity.

  9. The Czechoslovak-Polish Club in Brno (1925–1939)

    Czech Academy of Sciences Publication Activity Database

    Baron, Roman

    2011-01-01

    Roč. 3, č. 1 (2011), s. 43-64 ISSN 1803-6546 Institutional research plan: CEZ:AV0Z80150510 Keywords : Czechoslovak-Polish solidarity * Czechoslovak-Polish relations * Brno * associations * Interwar Period Subject RIV: AB - History

  10. Phonematic translation of Polish texts by the neural network

    International Nuclear Information System (INIS)

    Bielecki, A.; Podolak, I.T.; Wosiek, J.; Majkut, E.

    1996-01-01

    Using the back propagation algorithm, we have trained the feed forward neural network to pronounce Polish language, more precisely to translate Polish text into its phonematic counterpart. Depending on the input coding and network architecture, 88%-95% translation efficiency was achieved. (author)

  11. Etymology in the Polish Academy of Sciences Great Dictionary of ...

    African Journals Online (AJOL)

    The article offers an insight into etymological information provided in the Polish Academy of Sciences Great Dictionary of Polish (Pol. Wielki słownik języka polskiego PAN, WSJP PAN). The dictionary and the rules of producing the entries are briefly presented. These rules influence the way of working on etymology within ...

  12. Polish Qualitative Sociology. Insight into the future of postdisciplinary research

    OpenAIRE

    Konecki, Krzysztof

    2014-01-01

    The paper desctibes the definitions of following concepts: multidisiplinarity, interdisciplinarity, transdysciplinarity, postdisciplinarity. MOreover it discuss the meanings of a concept of discipline. It describes the place of the Polish qualitative sociology in the context of postdisciplinary research. The main question of paper is: Does the POlish Qualitative Sociology has entered the postdisciplinary phase of research? DGS, UL Krzysztof Konecki

  13. 'Committee 1540': last progress report - News note

    International Nuclear Information System (INIS)

    Hautecouverture, Benjamin

    2007-01-01

    The Committee 1540 is in charge of the application of the resolution 1540 of the UN Security Council, and the author briefly presents and comments the content of the last progress report issued by this committee in November 2007. This progress report analyses the situation of the resolution in terms of implementation (number of reports and additional information documents, non reporting states and their location). The author outlines some institutional handicaps, notably the lack of power of control of the Committee for a better application of the resolution

  14. Note on the polishing of small spheres of ferrimagnetic materials

    Energy Technology Data Exchange (ETDEWEB)

    Grunberg, J. G.; Antier, G. [Centre d' etudes nucleaires de Grenoble - C.E.N.G. (France); Seiden, P. E. [Institut Fourier, Universite de Grenoble (France)

    1961-07-01

    This note describes a simple and rapid method that we have used for obtaining a high degree of polish on spheres of ferrimagnetic materials. A high surface polish is of particular importance if one desires to perform ferrimagnetic resonance experiments on very narrow linewidth materials such as Yttrium Iron Garnet. It is not possible to obtain the very narrow linewidths without polishing the sample with a very fine abrasive such as 'Linde A'. Although the methods presently used for the fine polishing of ferrite spheres give satisfactory results, the method described here is of particular interest because of its simplicity and speed. For example with the air-jet tumbling technique it can take as long as three days of polishing to obtain an acceptable surface while our method will give the same results in one to two hours. (author)

  15. Chemical polishing of partially oxidized T-111 alloy

    International Nuclear Information System (INIS)

    Teaney, P.E.

    1974-01-01

    The specimens were pressure-mounted in Bakelite and ground through 600 grit on silicon carbide papers. The specimens were rough-polished on a vibratory polisher for 4 to 6 h, using a water slurry of one micron alumina on Texmet, followed by 0.3-μ alumina on Texmet overnight. Final polishing was accomplished by continuous swabbing with a chemical polish. A chemical polish consisting of ten parts lactic acid, four parts nitric acid, and four parts hydrofluoric acid worked well for the T-111 parent material specimens; however, in the partially oxidized specimens, considerable pitting and staining occurred in the oxygen-affected zone and in the transition zone between the oxygen-affected zone and the parent material. A chemical polish was developed for the partially oxidized specimens by adjusting the ratio of the acids to ten parts lactic acid, two parts nitric acid, and two parts hydrofluoric acid. This slowed the chemical attack on the oxygen-affected zone considerably and, with continuous swabbing, the pitting and stain could be avoided. The specimens were rinsed and checked occasionally on the metallograph to determine when the proper polish had been obtained. Some specimens required intermittent polishing times up to 1 / 2 hour. No relationship could be established between the oxygen content of the specimen and the time required for chemical polishing in the partially oxidized specimens. However, the microstructure of the transition zone was the most difficult to obtain, and specimens with uniform reaction zones across the width of the specimen polished quicker than those with the transition zone

  16. 78 FR 69991 - Advisory Committee; Veterinary Medicine Advisory Committee; Termination

    Science.gov (United States)

    2013-11-22

    .... FDA-2013-N-1380] Advisory Committee; Veterinary Medicine Advisory Committee; Termination AGENCY: Food... announcing the termination of the Veterinary Medicine Advisory Committee. This document removes the Veterinary Advisory Committee from the Agency's list of standing advisory committees. DATES: This rule is...

  17. Experimental Evaluation of the "Polished Panel Optical Receiver" Concept on the Deep Space Network's 34 Meter Antenna

    Science.gov (United States)

    Vilnrotter, Victor A.

    2012-01-01

    The potential development of large aperture ground-based "photon bucket" optical receivers for deep space communications has received considerable attention recently. One approach currently under investigation proposes to polish the aluminum reflector panels of 34-meter microwave antennas to high reflectance, and accept the relatively large spotsize generated by even state-of-the-art polished aluminum panels. Here we describe the experimental effort currently underway at the Deep Space Network (DSN) Goldstone Communications Complex in California, to test and verify these concepts in a realistic operational environment. A custom designed aluminum panel has been mounted on the 34 meter research antenna at Deep-Space Station 13 (DSS-13), and a remotely controlled CCD camera with a large CCD sensor in a weather-proof container has been installed next to the subreflector, pointed directly at the custom polished panel. Using the planet Jupiter as the optical point-source, the point-spread function (PSF) generated by the polished panel has been characterized, the array data processed to determine the center of the intensity distribution, and expected communications performance of the proposed polished panel optical receiver has been evaluated.

  18. The diagnosis and management of food allergies. Position paper of the Food Allergy Section the Polish Society of Allergology.

    Science.gov (United States)

    Bartuzi, Zbigniew; Kaczmarski, Maciej; Czerwionka-Szaflarska, Mieczysława; Małaczyńska, Teresa; Krogulska, Aneta

    2017-10-01

    The paper concerns the current position of the Polish Society of Allergology Food Allergy Section on the diagnosis and management of food allergies. The aim of this position is to provide evidence-based recommendations on the diagnosis and management of patients with allergic hypersensitivity to foods. This position statement includes a systematic review of studies in three areas, namely, the epidemiology, diagnosis and management of food allergies. While taking into account the specific Polish setting, in this publication we also used the current European Academy of Allergy and Clinical Immunology (EAACI) position paper and other current position statements, including those of the United States National Institute of Allergy and Infectious Diseases (NIAID).

  19. Abstracts Book of 42. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry

    International Nuclear Information System (INIS)

    1999-01-01

    Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry is the most important chemical forum of Polish chemists organised annually. The state of art of many fundamental and applied investigations have been presented and discussed. The following scientific sessions and microsymposia have been proposed: plenary session, analytical chemistry, inorganic chemistry, organic chemistry, chemistry and environment, chemistry and technology of polymers, chemistry didactics, electrochemistry, young scientists forum, chemical technology, chemical engineering, high energetics materials, computers in research and teaching of chemistry, structure modelling and polymer properties, silicon-organic compounds

  20. Summaries of the 40. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry

    International Nuclear Information System (INIS)

    1997-01-01

    Annual 40. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry has been held in Gdansk on 22-26 September 1997. The most valuable scientific results obtained in Polish Laboratories have been presented in 22 main sections and 7 symposia directed especially at following subjects: analytical chemistry, biochemistry, solid state chemistry and material science, physical chemistry, heteroorganic and coordination chemistry, medical and pharmaceutical chemistry, metalorganic chemistry, inorganic and organic chemistry, polymers chemistry, chemistry and environment protection, theoretical chemistry, chemical didactics, photochemistry, radiation chemistry and chemical kinetics, chemical engineering, catalysis, crystallochemistry, chemical technology, electrochemistry, and instrumental methods

  1. S. 1439: Export Reorganization Act of 1976. Hearings before the Joint Committee on Atomic Energy, Congress of the United States, Ninety-Fourth Congress, Second Session on S. 1439, S. 3770, and H.R. 15273

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    The hearing of July 28, 1976 on S. 1439, a bill to reorganize certain export functions of the Federal government, included statements from the following: Sen. John O. Pastore, Chairman, JCAE; Sen. Abraham Ribicoff; Sen. Charles H. Percy; Myron B. Kratzer, Deputy Ass't. Secy. for Nuclear Energy and Energy Technology, Dept. of State; Charles W. Robinson, Deputy Secy. of State; Dr. Robert W. Fri, Deputy Administrator, ERDA; Marcus A. Rowden, Chairman, NRC, accompanied by Commissioners Kennedy and Gilinsky; and the joint prepared statement of Senators Glenn, Percy, and Ribicoff. S. 1439 was unanimously rejected by the Joint Committee in open meeting on Aug. 26, 1976. Then on Aug. 31, 1976, the Joint Committee met to receive testimony on the Nuclear Explosive Proliferation Control Act of 1976, S. 3770 and H.R. 15273, the proposed substitute for S. 1439. The Aug. 31 hearing included statements by Rep. Melvin Price, Vice Chairman, JCAE, and Fri, Rowden, and Kratzer. Further background information, mainly letters, is included under ''Additional Materials'' and in three appendixes

  2. Antigenic typing Polish isolates of canine parvovirus

    Energy Technology Data Exchange (ETDEWEB)

    Mizak, B. [National Veterinary Research Institute, Pulawy (Poland); Plucienniczak, A. [Polish Academy ofd Sciences. Microbiology and Virology Center, Lodz (Poland)

    1995-12-31

    Polish strains of canine parvovirus isolated between 1982 and 1993 were examined to determine the extent to which the virus has evolved antigenically and genetically over eleven years. Two CPV isolates obtained in Warsaw in 1982 and Pulawy in 1993, were examined using monoclonal antibody typing, restriction analysis and sequencing VP-2 protein gene. Five other isolates from Warsaw and Pulawy were tested with the panel of monoclonal antibodies specific to CPV-2, CPV-2a and common for canine parvovirus, feline panleukopenia virus and milk enteritis virus. Results of the studies demonstrated that all isolates tested represented CPV-2a antigenic type. Rapid antigenic strain replacement recorded by Parrish and Senda in the U.S.A and Japan was not confirmed in Poland. (author). 30 refs, 2 tabs.

  3. Food patterns of Polish older people

    DEFF Research Database (Denmark)

    Wadolowska, L.; Danowska-Oziewicz, M.; Niedzwiedzka, E.

    2006-01-01

    Food patterns of Polish older people were separated and described. The research included 422 people aged 65+ years, living in 5 geographical locations. Participants of the study were selected in quota sampling. Criteria for recruitment included sex, age (65-^74 or 75+ years) and family status...... (living alone or living with other people). Respondents were asked questions about consumption of 55 food products. The factor analysis allowed for separating 21 food patterns. They included from 1 to 3 groups of products, intake of which was mutually dependant. Big number of separated food patterns...... and small number of products fonning joint food patterns speak in advocacy of relatively small reciprocal relationship between different food items consumed by the seniors in Poland....

  4. Attitudes of Polish Consumers Toward Experiential Marketing

    Directory of Open Access Journals (Sweden)

    Monika Skorek

    2017-01-01

    Full Text Available Purpose: The experience economy is a concept that can be defned as a new way of perceiving the market offer of an enterprise, focusing on the customer experience. Enterprises, both in the production and service industries, are becoming similar to one another on a massive scale, which makes it increasingly diffcult to stand out. The response to this can be to offer the consumer an unforgettable experience related to a product or service provided by a company. Methodology: This study analysed the results of qualitative research on the attitudes and opinions of Polish consumers on experience marketing. Results/fndings: The results showed that participants of the study were prepared to transition from the economy based on products or services to an economy based on experiences at a moderate level. They declared a willingness to participate in experiences offered by companies but at the same time focus on the cost and utility of them

  5. Antigenic typing Polish isolates of canine parvovirus

    International Nuclear Information System (INIS)

    Mizak, B.; Plucienniczak, A.

    1995-01-01

    Polish strains of canine parvovirus isolated between 1982 and 1993 were examined to determine the extent to which the virus has evolved antigenically and genetically over eleven years. Two CPV isolates obtained in Warsaw in 1982 and Pulawy in 1993, were examined using monoclonal antibody typing, restriction analysis and sequencing VP-2 protein gene. Five other isolates from Warsaw and Pulawy were tested with the panel of monoclonal antibodies specific to CPV-2, CPV-2a and common for canine parvovirus, feline panleukopenia virus and milk enteritis virus. Results of the studies demonstrated that all isolates tested represented CPV-2a antigenic type. Rapid antigenic strain replacement recorded by Parrish and Senda in the U.S.A and Japan was not confirmed in Poland. (author). 30 refs, 2 tabs

  6. Consensus, contracts, and committees.

    Science.gov (United States)

    Moreno, J D

    1991-08-01

    Following a brief account of the puzzle that ethics committees present for the Western Philosophical tradition, I will examine the possibility that social contract theory can contribute to a philosophical account of these committees. Passing through classical as well as contemporary theories, particularly Rawls' recent constructivist approach, I will argue that social contract theory places severe constraints on the authority that may legitimately be granted to ethics committees. This, I conclude, speaks more about the suitability of the theory to this level of analysis than about the ethics committee phenomenon itself.

  7. Human research ethics committees in technical universities.

    Science.gov (United States)

    Koepsell, David; Brinkman, Willem-Paul; Pont, Sylvia

    2014-07-01

    Human research ethics has developed in both theory and practice mostly from experiences in medical research. Human participants, however, are used in a much broader range of research than ethics committees oversee, including both basic and applied research at technical universities. Although mandated in the United States, the United Kingdom, Canada, and Australia, non-medical research involving humans need not receive ethics review in much of Europe, Asia, Latin America, and Africa. Our survey of the top 50 technical universities in the world shows that, where not specifically mandated by law, most technical universities do not employ ethics committees to review human studies. As the domains of basic and applied sciences expand, ethics committees are increasingly needed to guide and oversee all such research regardless of legal requirements. We offer as examples, from our experience as an ethics committee in a major European technical university, ways in which such a committee provides needed services and can help ensure more ethical studies involving humans outside the standard medical context. We provide some arguments for creating such committees, and in our supplemental article, we provide specific examples of cases and concerns that may confront technical, engineering, and design research, as well as outline the general framework we have used in creating our committee. © The Author(s) 2014.

  8. New perspectives in hydrodynamic radial polishing techniques for optical surfaces

    Science.gov (United States)

    Ruiz, Elfego; Sohn, Erika; Luna, Esteban; Salas, Luis; Cordero, Alberto; González, Jorge; Núñez, Manuel; Salinas, Javier; Cruz-González, Irene; Valdés, Jorge; Cabrera, Victor; Martínez, Benjamín

    2004-09-01

    In order to overcome classic polishing techniques, a novel hydrodynamic radial polishing tool (HyDRa) is presented; it is useful for the corrective lapping and fine polishing of diverse materials by means of a low-cost abrasive flux and a hydrostatic suspension system that avoids contact of the tool with the working surface. This tool enables the work on flat or curved surfaces of currently up to two and a half meters in diameter. It has the advantage of avoiding fallen edges during the polishing process as well as reducing tool wear out and deformation. The functioning principle is based on the generation of a high-velocity, high-pressure, abrasive emulsion flux with radial geometry. The polishing process is repeatable by means of the control of the tool operational parameters, achieving high degrees of precision and accuracy on optical and semiconductor surfaces, with removal rates of up to 9 mm3/hour and promising excellent surface polishing qualities. An additional advantage of this new tool is the possibility to perform interferometric measurements during the polishing process without the need of dismounting the working surface. A series of advantages of this method, numerical simulations and experimental results are described.

  9. [The issue of harm reduction in Polish legislation concerning drug addiction. A comparative study].

    Science.gov (United States)

    Sobeyko, Justyna

    2008-01-01

    The aim of work is the assessment of legal permissibility for health and social harm reduction programmes resulting from drug use in the context of the polish legislation on narcotic drug use and drug addiction. The thesis outlines harm reduction programmes implemented worldwide, role of penal code in counteracting both narcotic drug supply and demand, attitude of United Nations and European Union to the drug problem including harm reduction programmes, solutions adopted in the selected European Union member states. The main part of the thesis presents the evolution of polish legislation regarding drug use and analysis of legal permissibility for harm reduction programmes in this context. The conclusion inferred is the statement that implementation of the harm reduction programmes requires a certain minimal depenalisation of the drug use by a legislator and the fact that restrictive legal system impedes programme realization. Thus the thesis postulates depenalisation of small drug quantities for personal use.

  10. Benefits and costs of IFRS implementation in the opinion of Polish certified auditors

    Directory of Open Access Journals (Sweden)

    Anna Karmańska

    2017-12-01

    Full Text Available The article presents the results of a survey conducted among a carefully selected group of Polish certified auditors. The purpose of the study was to determine whether auditors, during the audit of financial state- ments, perceive certain costs and benefits resulting from the fact that the audited statements were pre- pared in accordance with IFRS. This survey was undertaken to demonstrate that the cost-benefit analysis of IFRS, after more than a decade of their use in Polish practice, could provide important observations for future legislative changes in this area. The study shows that, thanks to the implementation of IFRSs, auditors gain the benefit of lower audit workloads. At the same time, however, they identify six reasons why the audit process is prolonged, requiring special organization, prior special preparation and, as a result, higher auditing costs

  11. Intergeneration transmission of cultural heritage of polish Tatars family in the years 1918 - 1939

    Directory of Open Access Journals (Sweden)

    URSZULA WRÓBLEWSKA

    2017-10-01

    Full Text Available The subject matter of my article is analysis religion educational and cultural processes, which influenced in family on Polish Muslim Tatars during the period between World Wars. Chronological rangę overlaps 1918-1939 years. During that period, Poland built its State structures after a long time of partitions. I would like to display a multi-dimensional characteristic of Polish Tatars religion education. In my article I would like to answer to the ąuestion: What was important in transfer between generation in family of Tatars? I would also like to fili in ‘blank’ in the researches in the field of Tatars minority and family educational processes in the years 1918-1939.

  12. Cultural differences: Polish fandom of Welcome to Night Vale

    Directory of Open Access Journals (Sweden)

    Agata Włodarczyk

    2015-06-01

    Full Text Available Welcome to Night Vale (2012– is an intertextual podcast in the tradition of popular horror and weird tales. Listeners are meant to be part of a (fictional community, listening to the radio in the small desert town of Night Vale in the Southwestern United States, although neither the state nor the exact time are specified. We follow the host of the program, Cecil Palmer, as he describes the town's community life, although the events presented in the show are far from normal. The first episode was published online June 15, 2012, with no marketing to accompany the event. Many had first heard about Welcome to Night Vale through fan art available via social media, including Tumblr, Soup.io, blog communities, Facebook groups, and deviantArt. Although the production is available in English only, it has a Polish fandom. We describe the difference in perception of this popular text based on differences in the cultural background and literary knowledge of the listeners. We also attend to fan practices such as fan art surrounding Welcome to Night Vale because their content correlates with the creator's culture of origin, as well as the issue of funding the free podcast among fans from different countries and different economies.

  13. Reel-to-reel substrate tape polishing system

    Energy Technology Data Exchange (ETDEWEB)

    Selvamanickam, Venkat; Gardner, Michael T.; Judd, Raymond D.; Weloth, Martin; Qiao, Yunfei

    2005-06-21

    Disclosed is a reel-to-reel single-pass mechanical polishing system (100) suitable for polishing long lengths of metal substrate tape (124) used in the manufacture of high-temperature superconductor (HTS) coated tape, including multiple instantiations of a polishing station (114) in combination with a subsequent rinsing station (116) arranged along the axis of the metal substrate tape (124) that is translating between a payout spool (110a) and a take-up spool (110b). The metal substrate tape obtains a surface smoothness that is suitable for the subsequent deposition of a buffer layer.

  14. Polishing Sapphire Substrates by 355 nm Ultraviolet Laser

    Directory of Open Access Journals (Sweden)

    X. Wei

    2012-01-01

    Full Text Available This paper tries to investigate a novel polishing technology with high efficiency and nice surface quality for sapphire crystal that has high hardness, wear resistance, and chemical stability. A Q-switched 355 nm ultraviolet laser with nanosecond pulses was set up and used to polish sapphire substrate in different conditions in this paper. Surface roughness Ra of polished sapphire was measured with surface profiler, and the surface topography was observed with scanning electronic microscope. The effects of processing parameters as laser energy, pulse repetition rate, scanning speed, incident angle, scanning patterns, and initial surface conditions on surface roughness were analyzed.

  15. Microscopic machining mechanism of polishing based on vibrations of liquid

    International Nuclear Information System (INIS)

    Huang, Z G; Guo, Z N; Chen, X; Yu, Z Q; Yu, T M; Lee, W B

    2007-01-01

    A molecular dynamics method has been applied to study the mechanism of polishing based on vibrations of liquid. Movements of polishing particles and formations of impact dents are simulated and discussed. The abrasive effect between particle and machined substrate is evaluated empirically. Polishing qualities, including roughness and fractal character under multiple impacts, are obtained by numerical methods. Results show that the particle will vibrate and roll viscously on the substrate. Press, tear and self-organization effects will be responsible for the formation of impact dents. Simulation results are compared with experimental data to verify the conclusions

  16. Presentation of the verbs in Bulgarian-Polish electronic dictionary

    Directory of Open Access Journals (Sweden)

    Ludmila Dimitrova

    2014-09-01

    Full Text Available Presentation of the verbs in Bulgarian-Polish electronic dictionary This paper briefly discusses the presentation of the verbs in the first electronic Bulgarian-Polish dictionary that is currently being developed under a bilateral collaboration between IMI-BAS and ISS-PAS. Special attention is given to the digital entry classifiers that describe Bulgarian and Polish verbs. Problems related to the correspondence between natural language phenomena and their presentations are discussed. Some examples illustrate the different types of dictionary entries for verbs.

  17. "Agricultural budget" and the competitiveness of the Polish agriculture

    OpenAIRE

    Lenkiewicz, Stanisław; Rokicki, Bartłomiej

    2014-01-01

    The aim of the publication is to assess the impact of public support on the functioning of the Polish agriculture. In order to achieve this aim the publication includes an analysis of the system of direct payments and rural development policy instruments planned to be implemented in Poland within the CAP 2014-2020. The study also presents an analysis of regional diversity of the Polish agriculture and an assessment of the scale of agricultural investment made in recent years in all the Polish...

  18. European Committee for Future Accelerators

    International Nuclear Information System (INIS)

    Mulvey, John

    1983-01-01

    Nearly 21 years ago, in December 1962, Viktor Weisskopf and Cecil Powell, then respectively CERN's Director General and Chairman of the Scientific Policy Committee, called together a group of European high energy physicists to advise on steps to reach higher energy. The CERN PS had been in operation since 1959, its experimental programme was well established and the time had come to think of the future. The Chairman of the group, which later took the title 'European Committee for Future Accelerators', was Edoardo Amaldi and his influential report, presented to the CERN Council in June 1963, reviewed the whole structure and possible development of the field in the CERN Member States. Its proposals included the construction of the Intersecting Storage Rings (ISR), and of a 300 GeV proton accelerator which was then envisaged as being the major facility of a second CERN Laboratory elsewhere in Europe

  19. Committee on Science

    Science.gov (United States)

    SCIENCE ADVISOR WASHINGTON, DC -- Today, House Science Committee Chairman Sherwood Boehlert (R-NY23) and Advisor nominee Dr. John H. Marburger. The Senate Commerce Committee has scheduled a nomination hearing for this afternoon, and Boehlert and Grucci have been invited to testify. Dr. Marburger was nominated

  20. LOCAL ORGANIZING COMMITTEE

    Indian Academy of Sciences (India)

    Prof. B. B. P. Gupta

    INDIAN ACADEMY OF SCIENCES. Bengaluru. 83rd ANNUAL MEETING. 3–5 November 2017, NEHU, Shillong. LOCAL ORGANIZING COMMITTEE. Local Organizing Committee. 1. Prof. S. K. Srivastava. Chairman. Vice-Chancellor, NEHU, Shillong. 2. Prof. B. B. P. Gupta. Organising Secretary. Department of Zoology ...

  1. Pesticide Program Dialogue Committee (PPDC)

    Science.gov (United States)

    The Pesticide Program Dialogue Committee, a permanent, broadly representative advisory committee, meets with EPA on a regular basis to discuss pesticide regulatory, policy, and program implementation issues.

  2. Scaling properties of Polish rain series

    Science.gov (United States)

    Licznar, P.

    2009-04-01

    Scaling properties as well as multifractal nature of precipitation time series have not been studied for local Polish conditions until recently due to lack of long series of high-resolution data. The first Polish study of precipitation time series scaling phenomena was made on the base of pluviograph data from the Wroclaw University of Environmental and Life Sciences meteorological station located at the south-western part of the country. The 38 annual rainfall records from years 1962-2004 were converted into digital format and transformed into a standard format of 5-minute time series. The scaling properties and multifractal character of this material were studied by means of several different techniques: power spectral density analysis, functional box-counting, probability distribution/multiple scaling and trace moment methods. The result proved the general scaling character of time series at the range of time scales ranging form 5 minutes up to at least 24 hours. At the same time some characteristic breaks at scaling behavior were recognized. It is believed that the breaks were artificial and arising from the pluviograph rain gauge measuring precision limitations. Especially strong limitations at the precision of low-intensity precipitations recording by pluviograph rain gauge were found to be the main reason for artificial break at energy spectra, as was reported by other authors before. The analysis of co-dimension and moments scaling functions showed the signs of the first-order multifractal phase transition. Such behavior is typical for dressed multifractal processes that are observed by spatial or temporal averaging on scales larger than the inner-scale of those processes. The fractal dimension of rainfall process support derived from codimension and moments scaling functions geometry analysis was found to be 0.45. The same fractal dimension estimated by means of the functional box-counting method was equal to 0.58. At the final part of the study

  3. Polish electoral geography and its methods

    Directory of Open Access Journals (Sweden)

    Zbigniew Rykiel

    2011-01-01

    Full Text Available Differences in the understanding of electoral geography between social sciences are discussed in the article. Main fields and spatial scales of Polish electoral geography are identified. Main methods of multidimensional statistics are discussed. A necessity of a proper choice, based on theories of voting behaviour, of explaning variables to statistical models are emphasised. Regression analysis indicates only a formal usefulness in electoral geography, for quantitative relationships between variables in the model can be evidenced, which may be meaningless not only essentially, but even statistically. The application of canonical analysis in electoral geography brought a methodological turning-point to the statistical approach. This method allowed to combine: (1 the foundation of the selection of input variables on theories of voting behaviour; (2 the analysis of dependence of the electoral results on socio-economic characteristics of areas; (3 an identification of electoral options; (4 a quantification of the role of the historical heritage in the contemporary voting behaviour; and (5 the analysis of the stability of the electoral space. A well grounded opinion was weakened about the general competitiveness of right- and left-wing parties in Poland’s political space. Parties with similar rather than different programmes compete in given areas. It was indicated that elections have only formal influence on the structure of Parliament while the electoral system is decisive. Electoral, including territorial, manipulations also play their part. The empirical analysis indicated that Poland’s political space is polarised between the right-wing-oriented areas of the south-eastern half of the country and the left-wing-oriented areas of the north-western half. The political competition between the left and the right operates merely on the national scale, while it is not reflected territorially.The quantification of the influence of the nineteenth

  4. DEMONSTRATION BULLETIN: COLLOID POLISHING FILTER METHOD - FILTER FLOW TECHNOLOGY, INC.

    Science.gov (United States)

    The Filter Flow Technology, Inc. (FFT) Colloid Polishing Filter Method (CPFM) was tested as a transportable, trailer mounted, system that uses sorption and chemical complexing phenomena to remove heavy metals and nontritium radionuclides from water. Contaminated waters can be pro...

  5. The resettlement of Polish refugees after the second world war

    Directory of Open Access Journals (Sweden)

    Agata Blaszczyk

    2017-02-01

    Full Text Available The passing of the Polish Resettlement Act and the creation of the different agencies related to it undoubtedly represented an unprecedented response to the challenge of mass migration in the UK.

  6. Comparative study of performance of shoe polishes formulated from ...

    African Journals Online (AJOL)

    GARZALI

    1Department of Pure and Industrial Chemistry, Bayero University, Kano. 2College of Science ... carbon black pigment. Polyethylene polish like the one formulated using carbon black pigment was ... into fine black powder. Purification of Wax.

  7. Polish Defense Policy in the Context of National Security Strategy

    National Research Council Canada - National Science Library

    Bieniek, Piotr S

    2006-01-01

    ...) and the North Atlantic Treaty Organization (NATO). Polish security policy and strategy is shaped by its geographical location, which places Poland in NATO's main strategic area opposite the Russian Federation and Belarus...

  8. Employability management practices in the Polish ICT sector

    NARCIS (Netherlands)

    Marzec, I.; van der Heijden, Beatrice; Scholarios, D.; van der Schoot, E.; Jedrzejowicz, P.; Bozionelos, N.; Epitropaki, O.; Knauth, P.; Mikkelsen, A.; van der Heijde, C.M.

    2009-01-01

    This article examines current career thinking and employability management practices within the Polish Information and Communication Technology (ICT) sector. The aim of this contribution is to identify career management problems and to determine obstacles for implementing employability management

  9. Super Polishing of Aluminum 6061-T6 Mirrors, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — An innovative 2D super-polishing process for Aluminum 6061-T6 planar mirrors which removes diamond point turning (DPT) grooves and attains rms surface finishes below...

  10. Production of rare earth polishing powders in Russia

    International Nuclear Information System (INIS)

    Kosynkin, V.D.; Ivanov, E.N.; Kotrekhov, V.A.; Shtutza, M.G.; Grabko, A.I.

    1998-01-01

    Full text: Russia is a potent producer of polishing powders made of rare earth material presented as an extensive and well developed base. Considering the reserves, the facilities predisposition and the polishing agent (cerium dioxide) content the chief mineral source is loparite, apatite and monazite. The production of rare earth polishing powders is based on specially developed continuous technological processes, corrosion-proof equipment, ensuring a high and stable production quality. A special attention is paid to the radiation safety of the powders. The initial material for the rare earth polishing powders based on loparite is the fusion cake of rare earth chlorides obtained at that mineral chlorination. The technology of the polishing powder production from the REE fusion cake includes the following stages: dissolution of the REE fusion cake chlorides; - thorough cleaning of the REE fusion cake chlorides from radioactive and non-rare-earth impurities; chemical precipitation of REE carbonates, obtaining middlings with proper material and granulometric composition, thermal treatment of precipitated carbonates followed with the operations of drying and roasting; classification of roasted oxides, obtaining end products - polishing powders. The production of fluorine-containing powders includes the stage of their fluorination after the stage of carbonate precipitation. The stabilizing doping can be introduced both into the middlings during one of the technological process of powders manufacturing and into the end product. Rare earth polishing powders are manufactured in Russia by the Share Holding Company 'Chepetz Mechanical Plant' (ChMP Co.), the city of Glasov. The plant produces a number of polishing materials, such as; polishing powder Optinol, containing at least 50% by mass of cerium dioxide, used in the mass production of optical and other articles; polishing powder Optinol-10 with doping to improve the sedimentary and aggregate stability of the solid phase

  11. Research on high-efficiency polishing technology of photomask substrate

    Science.gov (United States)

    Zhao, Shijie; Xie, Ruiqing; Zhou, Lian; Liao, Defeng; Chen, Xianhua; Wang, Jian

    2018-03-01

    A method of photomask substrate fabrication is demonstrated ,that the surface figure and roughness of fused silica will converge to target precision rapidly with the full aperture polishing. Surface figure of optical flats in full aperture polishing processes is primarily dependent on the surface profile of polishing pad, therefor, a improved function of polishing mechanism was put forward based on two axis lapping machine and technology experience, and the pad testing based on displacement sensor and the active conditioning method of the pad is applied in this research. Moreover , the clamping deformation of the thin glass is solved by the new pitch dispensing method. The experimental results show that the surface figure of the 152mm×152mm×6.35mm optical glass is 0.25λ(λ=633nm) and the roughness is 0.32nm ,which has meet the requirements of mask substrate for 90 45nm nodes.

  12. Polish president escapes domestic troubles during state visit / Milda Seputyte

    Index Scriptorium Estoniae

    Seputyte, Milda

    2005-01-01

    Poola presidenti Aleksander Kwasnievskit kritiseeritakse, kuna ta ei soovi olla naftakompanii Orlen erastamisjuhtumi tunnistajaks. President sõitis visiidile Leetu, et arutada 9. mai Moskva pidustustega seonduvat ning määratleda Leedu ja Poola panust Euroopa Liidu poliitikasse

  13. Laser polishing of 3D printed mesoscale components

    International Nuclear Information System (INIS)

    Bhaduri, Debajyoti; Penchev, Pavel; Batal, Afif; Dimov, Stefan; Soo, Sein Leung; Sten, Stella; Harrysson, Urban; Zhang, Zhenxue; Dong, Hanshan

    2017-01-01

    Highlights: • Process optimisation for laser polishing novel 3D printed SS316L parts. • Evaluating the effects of key polishing parameters on SS316L surface roughness. • Detailed spectroscopic analysis of oxide layer formation due to laser polishing. • Comparative surface integrity analysis of SS parts polished in air and argon. • A maximum reduction in roughness of over 94% achieved at optimised polishing settings. - Abstract: Laser polishing of various engineered materials such as glass, silica, steel, nickel and titanium alloys, has attracted considerable interest in the last 20 years due to its superior flexibility, operating speed and capability for localised surface treatment compared to conventional mechanical based methods. The paper initially reports results from process optimisation experiments aimed at investigating the influence of laser fluence and pulse overlap parameters on resulting workpiece surface roughness following laser polishing of planar 3D printed stainless steel (SS316L) specimens. A maximum reduction in roughness of over 94% (from ∼3.8 to ∼0.2 μm S_a) was achieved at the optimised settings (fluence of 9 J/cm"2 and overlap factors of 95% and 88–91% along beam scanning and step-over directions respectively). Subsequent analysis using both X-ray photoelectron spectroscopy (XPS) and glow discharge optical emission spectroscopy (GDOES) confirmed the presence of surface oxide layers (predominantly consisting of Fe and Cr phases) up to a depth of ∼0.5 μm when laser polishing was performed under normal atmospheric conditions. Conversely, formation of oxide layers was negligible when operating in an inert argon gas environment. The microhardness of the polished specimens was primarily influenced by the input thermal energy, with greater sub-surface hardness (up to ∼60%) recorded in the samples processed with higher energy density. Additionally, all of the polished surfaces were free of the scratch marks, pits, holes, lumps

  14. Laser polishing of 3D printed mesoscale components

    Energy Technology Data Exchange (ETDEWEB)

    Bhaduri, Debajyoti, E-mail: debajyoti.bhaduri@gmail.com [Department of Mechanical Engineering, School of Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom); Penchev, Pavel; Batal, Afif; Dimov, Stefan; Soo, Sein Leung [Department of Mechanical Engineering, School of Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom); Sten, Stella; Harrysson, Urban [Digital Metal, Höganäs AB, 263 83 Höganäs (Sweden); Zhang, Zhenxue; Dong, Hanshan [School of Metallurgy and Materials, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom)

    2017-05-31

    Highlights: • Process optimisation for laser polishing novel 3D printed SS316L parts. • Evaluating the effects of key polishing parameters on SS316L surface roughness. • Detailed spectroscopic analysis of oxide layer formation due to laser polishing. • Comparative surface integrity analysis of SS parts polished in air and argon. • A maximum reduction in roughness of over 94% achieved at optimised polishing settings. - Abstract: Laser polishing of various engineered materials such as glass, silica, steel, nickel and titanium alloys, has attracted considerable interest in the last 20 years due to its superior flexibility, operating speed and capability for localised surface treatment compared to conventional mechanical based methods. The paper initially reports results from process optimisation experiments aimed at investigating the influence of laser fluence and pulse overlap parameters on resulting workpiece surface roughness following laser polishing of planar 3D printed stainless steel (SS316L) specimens. A maximum reduction in roughness of over 94% (from ∼3.8 to ∼0.2 μm S{sub a}) was achieved at the optimised settings (fluence of 9 J/cm{sup 2} and overlap factors of 95% and 88–91% along beam scanning and step-over directions respectively). Subsequent analysis using both X-ray photoelectron spectroscopy (XPS) and glow discharge optical emission spectroscopy (GDOES) confirmed the presence of surface oxide layers (predominantly consisting of Fe and Cr phases) up to a depth of ∼0.5 μm when laser polishing was performed under normal atmospheric conditions. Conversely, formation of oxide layers was negligible when operating in an inert argon gas environment. The microhardness of the polished specimens was primarily influenced by the input thermal energy, with greater sub-surface hardness (up to ∼60%) recorded in the samples processed with higher energy density. Additionally, all of the polished surfaces were free of the scratch marks, pits, holes

  15. 77 FR 40323 - Notice of Invitation for Nominations to the Advisory Committee on Agriculture Statistics

    Science.gov (United States)

    2012-07-09

    ... Nominations to the Advisory Committee on Agriculture Statistics AGENCY: National Agricultural Statistics..., State agriculture representatives, and agriculture-related business and marketing experts. Members serve... annually. All meetings are open to the public. Committee members are reimbursed for official travel...

  16. 75 FR 81645 - Meeting of the Judicial Conference Advisory Committee on Rules of Criminal Procedure

    Science.gov (United States)

    2010-12-28

    .... McCabe, Secretary, Rules Committee Support Office, Administrative Office of the United States Courts, Washington, DC 20544, telephone (202) 502-1820. Dated: December 21, 2010. Peter G. McCabe, Rules Committee...

  17. Reusing Ceramic Tile Polishing Waste In Paving Block Manufacturing

    OpenAIRE

    Giordano Penteado; Carmenlucia Santos; de Carvalho; Eduardo Viviani; Cecche Lintz; Rosa Cristina

    2016-01-01

    Ceramic companies worldwide produce large amounts of polishing tile waste, which are piled up in the open air or disposed of in landfills. These wastes have such characteristics that make them potential substitutes for cement and sand in the manufacturing of concrete products. This paper investigates the use of ceramic tile polishing waste as a partial substitute for cement and sand in the manufacturer of concrete paving blocks. A concrete mix design was defined and then the sand was replaced...

  18. Borel hierarchies in infinite products of Polish spaces

    Indian Academy of Sciences (India)

    with two product topologies: (i) the product of copies of the Polish topology on X, so that H is again a Polish space and (ii) the product of copies of the discrete topology on X. Define now the Borel hierarchy in the larger topology on H. To do so, we need some notation. An element of H will be denoted by h = (x1,x2,...,xn,.

  19. Polish Standard of the Technical Safety of Transmission Gas Pipelines

    International Nuclear Information System (INIS)

    Tkacz, A.J.

    2006-01-01

    The document is presenting the idea of the CNGI Norm called The Polish Standard of the Technical Safety of Transmission Gas Pipelines and the way of using it by companies associated in the Chamber of the Natural Gas Industry in the business activity. It will be applied to improve the quality and reliability of gas transmission after full opening of Polish natural gas market. (author)

  20. Factors influencing the surface quality of polished tool steels

    International Nuclear Information System (INIS)

    Rebeggiani, S; Rosén, B-G

    2014-01-01

    Today’s demands on surface quality of moulds for injection moulding of plastic components involve no/low defect contents and roughness levels in the nm-range for high gloss applications. Material properties as well as operating conditions influence the mould finish, and thus the final surface of moulded products. This paper focuses on how particle content and different polishing strategies influence final surface qualities of moulds. Visual estimations of polished tool steel samples were combined with non-contact 3D-surface texture analysis in order to correlate traditional assessments to more quantitative methods, and to be able to analyse the surfaces at nanometre-level. It was found that steels with a lower proportion of particles, like carbides and oxides, gave rise to smoother polished surfaces. In a comparative study of polishers from different polishing shops, it was found that while different surface preparation strategies can lead to similar final roughness, similar preparation techniques can produce high-quality surfaces from different steel grades. However, the non-contact 3D-surface texture analysis showed that not all smooth polished surfaces have desirable functional topographies for injection moulding of glossy plastic components. (paper)

  1. Study of Profile Changes during Mechanical Polishing using Relocation Profilometry

    Science.gov (United States)

    Kumaran, S. Chidambara; Shunmugam, M. S.

    2017-10-01

    Mechanical polishing is a finishing process practiced conventionally to enhance quality of surface. Surface finish is improved by mechanical cutting action of abrasive particles on work surface. Polishing is complex in nature and research efforts have been focused on understanding the polishing mechanism. Study of changes in profile is a useful method of understanding behavior of the polishing process. Such a study requires tracing same profile at regular process intervals, which is a tedious job. An innovative relocation technique is followed in the present work to study profile changes during mechanical polishing of austenitic stainless steel specimen. Using special locating fixture, micro-indentation mark and cross-correlation technique, the same profile is traced at certain process intervals. Comparison of different parameters of profiles shows the manner in which metal removal takes place in the polishing process. Mass removal during process estimated by the same relocation technique is checked with that obtained using weight measurement. The proposed approach can be extended to other micro/nano finishing processes and favorable process conditions can be identified.

  2. Polish Adaptation of Wrist Evaluation Questionnaires.

    Science.gov (United States)

    Czarnecki, Piotr; Wawrzyniak-Bielęda, Anna; Romanowski, Leszek

    2015-01-01

    Questionnaires evaluating hand and wrist function are a very useful tool allowing for objective and systematic recording of symptoms reported by the patients. Most questionnaires generally accepted in clinical practice are available in English and need to be appropriately adapted in translation and undergo subsequent validation before they can be used in another culture and language. The process of translation of the questionnaires was based on the generally accepted guidelines of the International Quality of Life Assessment Project (IQOLA). First, the questionnaires were translated from English into Polish by two independent translators. Then, a joint version of the translation was prepared collectively and translated back into English. Each stage was followed by a written report. The translated questionnaires were then evaluated by a group of patients. We selected 31 patients with wrist problems and asked them to complete the PRWE, Mayo, Michigan and DASH questionnaires twice at intervals of 3-10 days. The results were submitted for statistical analysis. We found a statistically significant (pquestionnaires. A comparison of the PRWE and Mayo questionnaires with the DASH questionnaire also showed a statistically significant correlation (pquestionnaires was successful and that the questionnaires may be used in clinical practice.

  3. Automated visual inspection for polished stone manufacture

    Science.gov (United States)

    Smith, Melvyn L.; Smith, Lyndon N.

    2003-05-01

    Increased globalisation of the ornamental stone market has lead to increased competition and more rigorous product quality requirements. As such, there are strong motivators to introduce new, more effective, inspection technologies that will help enable stone processors to reduce costs, improve quality and improve productivity. Natural stone surfaces may contain a mixture of complex two-dimensional (2D) patterns and three-dimensional (3D) features. The challenge in terms of automated inspection is to develop systems able to reliably identify 3D topographic defects, either naturally occurring or resulting from polishing, in the presence of concomitant complex 2D stochastic colour patterns. The resulting real-time analysis of the defects may be used in adaptive process control, in order to avoid the wasteful production of defective product. An innovative approach, using structured light and based upon an adaptation of the photometric stereo method, has been pioneered and developed at UWE to isolate and characterize mixed 2D and 3D surface features. The method is able to undertake tasks considered beyond the capabilities of existing surface inspection techniques. The approach has been successfully applied to real stone samples, and a selection of experimental results is presented.

  4. Personality of Polish gay men and women

    Directory of Open Access Journals (Sweden)

    Marcin Kwiatkowski

    2015-12-01

    Full Text Available Background Sexuality is a part of one’s identity and personality that is shaped under the influence of biological and environmental factors and interactions with society. The results of research conducted so far and concerning the personality traits of gay men and women are not consistent, and only a small number of them concern the Polish population. Hence the objective of the present research was to provide personality profiles of men and women with different sexual orientations. Participants and procedure The participants (N = 346 included 84 gay women, 82 gay men, 95 heterosexual women and 85 heterosexual men. The following measures were used: a survey developed by the author, the Kinsey Scale, the EPQ-R (Eysenck Personality Questionnaire Revised adapted by Brzozowski and Drwal (1995, and the Sixteen-factor Personality Questionnaire of Cattell adapted by Nowakowska (1970. Results The results support the hypothesis that gay women and heterosexual men share similar personality traits, while gay men have more diverse traits, similar to the traits typical for heterosexual women and men. In particular, personalities of gay men are described by such traits as progressive attitude, independence, or willingness to take risks, which means traits linked to factor Q1. The highest values of that factor are observable in the case of gay men, as compared to gay women, and also in comparison with heterosexual men and women. Conclusions Sexual orientation is responsible for differences in personality traits of the studied group to a greater extent than their biological sex.

  5. Thermodynamical motivation of the Polish energy policy

    Directory of Open Access Journals (Sweden)

    Ziębik Andrzej

    2013-02-01

    Full Text Available Basing on the first and second law of thermodynamics the fundamental trends in the Polish energy policy are analysed, including the aspects of environmental protection. The thermodynamical improvement of real processes (reduction of exergy losses is the main way leading to an improvement of the effectivity of energy consumption. If the exergy loss is economically not justified, we have to do with an error from the viewpoint of the second law analysis. The paper contains a thermodynamical analysis of the ratio of final and primary energy, as well as the analysis of the thermo-ecological cost and index of sustainable development concerning primary energy. Analyses of thermo-ecological costs concerning electricity and centralized heat production have been also carried out. The effect of increasing the share of high-efficiency cogeneration has been analyzed, too. Attention has been paid to an improved efficiency of the transmission and distribution of electricity, which is of special importance from the viewpoint of the second law analysis. The improvement of the energy effectivity in industry was analyzed on the example of physical recuperation, being of special importance from the point of view of exergy analysis.

  6. Polish university as an (unattractive potential employer

    Directory of Open Access Journals (Sweden)

    Baruk, Agnieszka Izabela

    2017-12-01

    Full Text Available The article presents issues associated with the reasons for the fact that young potential employees are not interested in starting work at Polish universities. The article is theoretical-empirical in character. The theoretical part highlights the importance of a situation in which an entity is regarded as an attractive employer, which allows attracting the best employees. Particular attention is paid to the fact that a university needs to build its image as an employer, which results from its characteristics. The article strives to achieve three research goals, among others, identifying the reasons why respondents are not interested in starting work at a university and arranging these reasons hierarchically. Two research hypotheses were subject to preliminary verification: H1 – the main reason for the unwillingness to start work at a university are financial aspects; H2 – the main reason for the unwillingness to start work at a university are the aspects of prestige. The data collected in course of primary research were subject to quantitative analysis based on the method of average assessment analysis and the method of factor analysis. Their results show that the respondents were not interested in work at a university mainly because they wanted to test the knowledge and skills acquired during studies in other branches. At the same time, the aspects of finances and prestige didn’t play a major role. Thus, in case of the surveyed sample of respondents both research hypotheses have to be recognized as untrue.

  7. Mercury emissions from polish pulverized coalfired boiler

    Directory of Open Access Journals (Sweden)

    Wichliński Michał

    2017-01-01

    Full Text Available The current paper presents the research results carried out at one of Polish power plants at a pulverized hard coal-fired 225 MW unit. The research was carried out at full load of the boiler (100% MCR and focused on analysis of mercury content in the input fuel and limestone sorbent for wet flue gas desulfurization (FGD system, as well as investigation of mercury content in the combustion products, i.e. fly ash, slag, FGD product (gypsum and FGD effluents (waste. Within the framework of the present study the concentration of mercury vapor in the exhaust gas was also investigated. The analysis was performed using Lumex RA-915+ spectrometer with an attachment (RP-91C. The measurements were carried out at three locations, i.e. before the electrostatic precipitator (ESP, downstream the ESP, and downstream the wet FGD plant. Design of the measurement system allowed to determine both forms of mercury in the flue gas (Hg0 and Hg2+ at all measurement locations.Based on the measurement results the balance of mercury for a pulverized coal (PC boiler was calculated and the amount of mercury was assessed both in the input solids (fuel and sorbent, as well as the gaseous and solids products (flue gas, slag, ash, gypsum and FGD waste.

  8. The socio-economic and spatial transformation of Polish cities after 1989

    Directory of Open Access Journals (Sweden)

    Jerzy J. Parysek

    2004-12-01

    Full Text Available The aim of this paper is to present the socio-economic and spatial transformation of Polish cities after 1989. The Polish changes reached the structures of the three basic subsystems of the state: political (power, social (society, and economic (the economy. The systemic transformation that has taken place in Poland after 1989 is most readily visible in towns, although it was introduced in the country as a whole. For the development and transforma-tion of towns, the most important were the introduction of local government structures and the market model of the economy. The restitution of local government has ensured towns an authentic manager authorised to perform his function by the local community. The in-troduction of the market model to the economy has resulted in its privatisation and the ap-pearance of enterprise and competition. Towns, especially the biggest cities, have become attractive locations for investment. Cities with a balanced economic structure and well-de-veloped infrastructure had much better chances for growth to start with. Unfortunately, the transformation period has also had some detrimental effects, the most important being un-employment and all kinds of social deviance. However, Polish cities are certainly different today and resemble Western cities to a greater extent than did the so-called socialist towns built along theoretically beautiful but practically ineffectual ideological lines.

  9. THE ECCLESIAL IMPLICATIONS OF THE LETTER OF THE POLISH BISHOPS TO THE GERMAN BISHOPS OF 1965

    Directory of Open Access Journals (Sweden)

    Żmudziński Marek

    2017-12-01

    Full Text Available The effects of World War II influenced the relations between the nations of Europe. They also influenced the life of the Church in a universal way, because its members found themselves of both sides of the Iron Curtain. This was particularly visible in Polish-German relations. The Polish bishops, inspired by the message of the Gospel and the legacy of the Second Vatican Council, came forward with a proposal of initiating the process of reconciliation. The words, “we forgive and ask for forgiveness”, contained in the Letter to the German Bishops of 1965, became the inspiration for the years-long reconciliation effort. The specific results of this formula are indicated in the formal normalisation of the state and church relations. In the ecclesial dimension, it included a new canonical diocese order and cooperation on the pastoral, charitable and journalistic plane. The real influence of the Polish-German reconciliation on the process of integration of the peoples of Europe should be emphasised. In this sense, the influence of the Christian message on shaping the public sphere is revealed.

  10. REVIEW OF THE NEGOTIATION OF THE MODEL PROTOCOL ADDITIONAL TO THE AGREEMENT(S) BETWEEN STATE(S) AND THE INTERNATIONAL ATOMIC ENERGY AGENCY FOR THE APPLICATION OF SAFEGUARDS, INFCIRC/540 (Corrected) VOLUME III/III, IAEA COMMITTEE 24, DEVELOPMENT OF INFCIRC/540, ARTICLE-BY-ARTICLE REVIEW (1996-1997).

    Energy Technology Data Exchange (ETDEWEB)

    Rosenthal, M.D.; Houck, F.

    2010-01-01

    In this section of the report, the development of INFCIRC/540 is traced by a compilation of citations from the IAEA documents presented to the Board of Governors and the records of discussions in the Board that took place prior to the establishment of Committee 24 as well as the documents and discussions of that committee. The evolution of the text is presented separately for each article or, for the more complex articles, for each paragraph or group of paragraphs of the article. This section covers all articles, including those involving no issues. Background, issues, interpretations and conclusions, which were addressed in Volumes I, II, and III are not repeated here. The comments by states that are included are generally limited to objections and suggested changes. Requests for clarification or elaboration have been omitted, although it is recognized that such comments were sometimes veiled objections.

  11. The Dynamics of Lithuanian-Polish Strategic Partnership

    Directory of Open Access Journals (Sweden)

    Pukšto Andžej

    2014-12-01

    Full Text Available The paper aims at identifying relations between the events which influence Lithuanian-Polish strategic cooperation, defining principal aspects of cooperation dynamics, and analysing recent challenges in relations between Lithuania and Poland. For the purpose of analysis the following objectives have been set: 1 to analyse the development of strategic partnership and political dialogue in bilateral relations; 2 to evaluate the importance of security, defence policy, and economic projects in cooperation between the states; 3 to assess the aspect of ethnic minorities in the context of bilateral relations. The authors of the paper seek to review the principal internal and external factors which affect bilateral cooperation between Lithuania and Poland. The following methods of analysis are used in the paper: public statements made by officials, document analysis and discourse formed by the media. The key areas of analysis are the development of political dialogue, strategic cooperation, security and defence policy, economic and energy cooperation, and questions of ethnic minorities in bilateral relations. Presently in the field there is a lack of thorough investigation of similarities and differences of strategic cooperation between Lithuania and Poland.

  12. POLISH AND EUROPEAN ECONOMIC CULTURE – A COMPARISON

    Directory of Open Access Journals (Sweden)

    Izabela Ścibiorska-Kowalczyk

    2013-12-01

    Full Text Available The term "economic culture" describes historically shaped elements in the general culture of population, concerning values recognized and desired by a particular community, relating to the management and to the economic system of the states. The most important economic cultural behaviors include: awareness of economic choices, attitudes and behaviors of economic choices, the rules of the economic game. There is a theory which assumes that the globalization of the economy will lead to the emergence of a single, common to the whole world culture through enculturation, which is defined as a gradual process of growing of the individual (or group into the culture or cultures through assimilation of cultural heritage of the surrounding community. More inculturation can be understood as a process of movement between different cultures come into contact and the transmission of cultural patterns. The article is an attempt at presenting the Polish economic culture against the European background and identifying the differences. It discusses the impact of national history and religion on the present shape of economic life, with particular regard to its negative aspects, i.e. the relatively high level of bribery and unemployment or the negative personal attitudes.

  13. Study on chemical mechanical polishing of silicon wafer with megasonic vibration assisted.

    Science.gov (United States)

    Zhai, Ke; He, Qing; Li, Liang; Ren, Yi

    2017-09-01

    Chemical mechanical polishing (CMP) is the primary method to realize the global planarization of silicon wafer. In order to improve this process, a novel method which combined megasonic vibration to assist chemical mechanical polishing (MA-CMP) is developed in this paper. A matching layer structure of polishing head was calculated and designed. Silicon wafers are polished by megasonic assisted chemical mechanical polishing and traditional chemical mechanical polishing respectively, both coarse polishing and precision polishing experiments were carried out. With the use of megasonic vibration, the surface roughness values Ra reduced from 22.260nm to 17.835nm in coarse polishing, and the material removal rate increased by approximately 15-25% for megasonic assisted chemical mechanical polishing relative to traditional chemical mechanical polishing. Average Surface roughness values Ra reduced from 0.509nm to 0.387nm in precision polishing. The results show that megasonic assisted chemical mechanical polishing is a feasible method to improve polishing efficiency and surface quality. The material removal and finishing mechanisms of megasonic vibration assisted polishing are investigated too. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. Fast breeder reactor program. Hearings before the Joint Economic Committee, Congress of the United States, Ninety-Fourth Congress, First Session

    International Nuclear Information System (INIS)

    Anon.

    1976-01-01

    The economics of the liquid metal fast breeder reactor (LMFBR) was the subject of hearings of the Joint Economic Committee, chaired by Sen. Hubert Humphrey. FY '76 funding for the breeder program is $450 million, the largest single item of the Federal energy program. Elmer B. Staats, U.S. Comptroller General, testified on the rising costs of demonstration facilities and pointed out that Federal agencies are required to make all estimates of costs and benefits in constant dollars rather than projecting for inflation. Staats recommended a joint ERDA-Congressional study of the possible use of foreign breeder technology. Sheldon Meyers of the Environmental Protection Agency, while not opposing the breeder program, recommended a delay to resolve three problem areas: (1) base energy demand projections; (2) timing of the commercial introduction of the LMFBR; and (3) uncertainties over possible benefits from the LMFBR program. Theodore B. Taylor, International Research and Technology Corp., discussed the costs and security safeguards of the LMFBR, which produces more spent fuel than the light water reactor. Other witnesses included Robert Seamans and officials from ERDA, Ralph Nader, and speakers from private study groups

  15. The Polish Mother on the defensive? The transformation of the myth and its impact on the motherhood of Polish women

    Directory of Open Access Journals (Sweden)

    Agnieszka Imbierowicz

    2012-06-01

    Full Text Available The subject of this presentation is the attempt to define and to present the origins, socio-cultural content and the evolution of The Polish Mother myth, present in the polish national consciousness. The author tries to show how this myth was born, what functions it fulfilled and what forms it took in the changing historical and social reality, from the moment of loss of independence, through a period of real socialism, until the present day. The impact of this myth in the lives of real women and their motherhood is taken into consideration. Then, the author comparing the results of the latest polish sociological researches on the family and its transformation, and transformation of value systems together with theories about the specifics of life in the period of postmodernity, wonders whether it’s time to deconstruct the myth of The Polish Mother, because it does not fit the conditions of today’s world, which is characterized, above all, by the apotheosis of individuality, self-realization and freedom, or perhaps in polish society there is still strong traditionalism in thinking about motherhood, and the myth of The Polish Mother is still alive?

  16. Standing Concertation Committee

    CERN Document Server

    HR Department

    2010-01-01

    Main issues examined at the meeting of 2 October 2009 The October 2009 meeting of the Standing Concertation Committee was entirely devoted to preparation of TREF’s meeting on 21-22 October. The Committee took note of, discussed and agreed on clarifications needed to some of the documents and presentations that the Management intended to submit and/or present to TREF on the following subjects: Equal opportunities The Committee took note of a preliminary report on equal opportunities at CERN drawn up by D. Chromek-Burckhart, the Equal Opportunities Officer, and T. Smith, Chairman of the Equal Opportunities Advisory Panel, containing in particular a proposal for a new process for resolving harassment conflicts. Technical analysis of the CERN Health Insurance Scheme - Actuary’s Report The Committee took note of a presentation by P. Charpentier, Chairman of the CERN Health Insurance Supervisory Board (CHIS Board), on the 2009 actuarial report on the CERN Health Insurance Scheme (CHIS). Th...

  17. Standing Concertation Committee

    CERN Document Server

    HR Department

    2008-01-01

    ORDINARY MEETING ON 27 FEBRUARY 2008 The main items discussed at the meetings of the Standing Concertation Committee on 27 February 2008 included: Short-term Saved Leave Scheme The Committee noted that, by the end of February 2008, some 600 staff had enrolled in the short-term saved leave scheme: approx. 58% had signed up for 1 slice, 14% for two slices, 5% for three slices and 23% for four slices. Administrative Circular No. 4 (Rev. 4) - Unemployment Insurance Scheme The Committee agreed to recommend the Director-General to approve Administrative Circular No. 4 (Rev. 4) - Unemployment Insurance Scheme. Administrative Circular No. 30 (Rev. 2) - Financial benefits upon taking up appointment and termination of contract The Committee agreed to recommend the Director-General to approve Administrative Circular No. 30 (Rev. 2) - Financial Benefits upon taking up appointment and termination of contract. Progressive Retirement Programme The Progressive Retirement Programme (PR...

  18. SELECTED PROBLEMS OF LAKES MANAGEMENT IN POLISH WATER LAW RELATED TO THE DIFFERENCES BETWEEN POLISH AND EUROPEAN UNION LEGISLATION

    Directory of Open Access Journals (Sweden)

    MARSZELEWSKI M

    2015-03-01

    Full Text Available Proper management of water resources has got significant social and economic dimension. For this reason, it is an essential element of almost every national law, European Union law, and also international law in a broad sense. Legislative authority, during legislature process, should allway s balance private and public interests to adopt compromised solutions. Furthermore these solutions must be determined mostly by hydrology to be appropriate to the nature of waters and environment. Because of mentioned issues, it is very undesirable state of affairs when law simply does not fit to the object of its regulation. In Water Law Act of 2001 Polish legislator classifies lakes, depending upon the type of watercourse (natural or man-made flowing into or out of the lake, among either flowing water or stagnant one. This regulation is against hydrological classification of lakes. Moreover this legal act introduces different treatment of dammed lakes in the context of public access to the lakeshores. Indicated problems have got significant impact on many aspects such as ownership of lakes, obligations of the owners of the lakes, lakes and environmental protection and, mentioned above, right to public acces to the lakes.

  19. Computer-Controlled Cylindrical Polishing Process for Development of Grazing Incidence Optics for Hard X-Ray Region

    Science.gov (United States)

    Khan, Gufran Sayeed; Gubarev, Mikhail; Speegle, Chet; Ramsey, Brian

    2010-01-01

    The presentation includes grazing incidence X-ray optics, motivation and challenges, mid spatial frequency generation in cylindrical polishing, design considerations for polishing lap, simulation studies and experimental results, future scope, and summary. Topics include current status of replication optics technology, cylindrical polishing process using large size polishing lap, non-conformance of polishin lap to the optics, development of software and polishing machine, deterministic prediction of polishing, polishing experiment under optimum conditions, and polishing experiment based on known error profile. Future plans include determination of non-uniformity in the polishing lap compliance, development of a polishing sequence based on a known error profile of the specimen, software for generating a mandrel polishing sequence, design an development of a flexible polishing lap, and computer controlled localized polishing process.

  20. Contingencies for Success: Examining Diversity Committees in Higher Education

    Science.gov (United States)

    Leon, Raul A.; Williams, Damon A.

    2016-01-01

    This study focused on an examination of the work of 10 diversity committees operating in 10 research institutions across the midwestern region of the United States. We explored the work of these committees with a focus on the concept of strategic diversity leadership. To conduct this examination we examined five contingencies impacting the work of…

  1. 76 FR 42112 - Specialty Crop Committee Stakeholder Listening Sessions

    Science.gov (United States)

    2011-07-18

    ... Specialty Crop Committee Stakeholder Listening Sessions AGENCY: Research, Education, and Economics, USDA. ACTION: Notice of stakeholder listening sessions. SUMMARY: In accordance with the Federal Advisory Committee Act, 5 U.S.C. App 2, the United States Department of Agriculture announces two stakeholder...

  2. 78 FR 31633 - Meeting of Citizen Coinage Advisory Committee

    Science.gov (United States)

    2013-05-24

    ... public may attend the meeting at the United States Mint, 801 9th Street NW., Washington, DC, Conference...: Notification of Citizens Coinage Advisory Committee May 30, 2013, Public Meeting. SUMMARY: Pursuant to United... Advisory Committee (CCAC) public meeting scheduled for May 30, 2013. Date: May 30, 2013. Time: 1:00 p.m. to...

  3. Germanium content in Polish hard coals

    Directory of Open Access Journals (Sweden)

    Makowska Dorota

    2016-01-01

    Full Text Available Due to the policy of the European Union, it is necessary to search for new sources of scarce raw materials. One of these materials is germanium, listed as a critical element. This semi-metal is widely used in the electronics industry, for example in the production of semiconductors, fibre optics and solar cells. Coal and fly ash from its combustion and gasification for a long time have been considered as a potential source of many critical elements, particularly germanium. The paper presents the results of germanium content determination in the Polish hard coal. 23 coal samples of various coal ranks were analysed. The samples were collected from 15 mines of the Upper Silesian Coal Basin and from one mine of the Lublin Coal Basin. The determination of germanium content was performed with the use of Atomic Absorption Spectrometry with Electrothermal Atomization (GFAAS. The investigation showed that germanium content in the analysed samples was at least twice lower than the average content of this element in the hard coals analysed so far and was in the range of 0.08 ÷ 1.28 mg/kg. Moreover, the content of Ge in the ashes from the studied coals does not exceed 15 mg/kg, which is lower than the average value of Ge content in the coal ashes. The highest content of this element characterizes coals of the Lublin Coal Basin and young coals type 31 from the Vistula region. The results indicate a low utility of the analysed coal ashes as a source of the recovery of germanium. On the basis of the analyses, the lack of the relationship between the content of the element and the ash content in the tested coals was noted. For coals of the Upper Silesian Coal Basin, the relationship between the content of germanium in the ashes and the depth of the seam was observed.

  4. The study of optimization on process parameters of high-accuracy computerized numerical control polishing

    Science.gov (United States)

    Huang, Wei-Ren; Huang, Shih-Pu; Tsai, Tsung-Yueh; Lin, Yi-Jyun; Yu, Zong-Ru; Kuo, Ching-Hsiang; Hsu, Wei-Yao; Young, Hong-Tsu

    2017-09-01

    Spherical lenses lead to forming spherical aberration and reduced optical performance. Consequently, in practice optical system shall apply a combination of spherical lenses for aberration correction. Thus, the volume of the optical system increased. In modern optical systems, aspherical lenses have been widely used because of their high optical performance with less optical components. However, aspherical surfaces cannot be fabricated by traditional full aperture polishing process due to their varying curvature. Sub-aperture computer numerical control (CNC) polishing is adopted for aspherical surface fabrication in recent years. By using CNC polishing process, mid-spatial frequency (MSF) error is normally accompanied during this process. And the MSF surface texture of optics decreases the optical performance for high precision optical system, especially for short-wavelength applications. Based on a bonnet polishing CNC machine, this study focuses on the relationship between MSF surface texture and CNC polishing parameters, which include feed rate, head speed, track spacing and path direction. The power spectral density (PSD) analysis is used to judge the MSF level caused by those polishing parameters. The test results show that controlling the removal depth of single polishing path, through the feed rate, and without same direction polishing path for higher total removal depth can efficiently reduce the MSF error. To verify the optical polishing parameters, we divided a correction polishing process to several polishing runs with different direction polishing paths. Compare to one shot polishing run, multi-direction path polishing plan could produce better surface quality on the optics.

  5. Indian School Equalization Program. Oversight Hearing on 1991-93 Budgeting for the Indian School Equalization Program. Joint Hearing before the Select Committee on Indian Affairs, United States Senate and the Subcommittee on Elementary, Secondary, and Vocational Education of the Committee on Education and Labor. House of Representatives, One Hundred Second Congress, Second Session.

    Science.gov (United States)

    Congress of the U.S., Washington, DC. Senate Select Committee on Indian Affairs.

    This report represents a hearing on the Indian School Equalization Program (ISEP) administered by the Bureau of Indian Affairs (BIA). The hearing began with opening remarks by the acting committee chairman of the Senate Select Committee on Indian Affairs, Paul Simon. Testimonies concerning the inadequacies of the ISEP funding formula are provided…

  6. Statement of Aaron Cohen, Director, Research and Engineering, Johnson Space Center and Chairman, Space Station Advanced Technology Advisory Committee, National Aeronautics and Space Administration, before the Subcommittee on Science, Technology, and Space, Committee on Commerce, Science, and Transportation, United States Senate

    Science.gov (United States)

    Cohen, A.

    1985-01-01

    The activities of NASA's Space Station Advanced Technology Advisory Committee is discussed. Advanced Technology Advisory Committee (ATAC) activities over the last year are reviewed in preparation of the report to Congress on the potential for advancing automation and robotics technology for the space station and for the U.S. economy.

  7. Infestation of Polish Agricultural Soils by Plasmodiophora Brassicae Along The Polish-Ukrainian Border

    Directory of Open Access Journals (Sweden)

    Jędryczka Małgorzata

    2014-07-01

    Full Text Available There has been a rapid, worldwide increase in oilseed rape production that has resulted in enormous intensification of oilseed rape cultivation, leading to tight rotations. This in turn, has caused an accumulation of pests as well as foliar and soil-borne diseases. Recently, clubroot has become one of the biggest concerns of oilseed rape growers. Clubroot is caused by the soil-borne protist Plasmodiophora brassicae Woronin. The pathogen may be present in groundwater, lakes, and irrigation water used in sprinkling systems. It can be easily transmitted from one field to another not only by water, but also by soil particles and dust transmitted by wind and on machinery. The aim of our overall study was to check for P. brassicae infestation of Polish agricultural soils. This paper presents the 2012 results of a study performed along the Polish-Ukrainian border in two provinces: Lublin (Lubelskie Voivodeship and the Carpathian Foothills (Podkarpackie Voivodeship, in south-east Poland. Monitoring was done in 11 counties, including nine rural and two municipal ones. In total, 40 samples were collected, out of which 36 were collected from fields located in rural areas and four from municipal areas, with two per municipal region. Each sample was collected at 8-10 sites per field, using a soil auger. The biotest to detect the presence of P. brassicae was done under greenhouse conditions using seedlings of the susceptible Brassicas: B. rapa ssp. pekinensis and the Polish variety of oilseed rape B. napus cv. Monolit. Susceptible plants grown in heavily infested soils produced galls on their roots. A county was regarded as free from the pathogen, if none of the bait plants became infected. The pathogen was found in three out of 40 fields monitored (7.5% in the Carpathian Foothill region. The fields were located in two rural counties. The pathogen was not found in Lublin province, and was also not detected in any of the municipal counties. The detection with

  8. Federalism and health policy: the intergovernmental committees in Brazil.

    Science.gov (United States)

    Machado, Cristiani Vieira; Lima, Luciana Dias de; Viana, Ana Luiza d'Ávila; Oliveira, Roberta Gondim de; Iozzi, Fabíola Lana; Albuquerque, Mariana Vercesi de; Scatena, João Henrique Gurtler; Mello, Guilherme Arantes; Pereira, Adelyne Maria Mendes; Coelho, Ana Paula Santana

    2014-08-01

    To analyze the dynamics of operation of the Bipartite Committees in health care in the Brazilian states. The research included visits to 24 states, direct observation, document analysis, and performance of semi-structured interviews with state and local leaders. The characterization of each committee was performed between 2007 and 2010, and four dimensions were considered: (i) level of institutionality, classified as advanced, intermediate, or incipient; (ii) agenda of intergovernmental negotiations, classified as diversified/restricted, adapted/not adapted to the reality of each state, and shared/unshared between the state and municipalities; (iii) political processes, considering the character and scope of intergovernmental relations; and (iv) capacity of operation, assessed as high, moderate, or low. Ten committees had advanced level of institutionality. The agenda of the negotiations was diversified in all states, and most of them were adapted to the state reality. However, one-third of the committees showed power inequalities between the government levels. Cooperative and interactive intergovernmental relations predominated in 54.0% of the states. The level of institutionality, scope of negotiations, and political processes influenced Bipartite Committees' ability to formulate policies and coordinate health care at the federal level. Bipartite Committees with a high capacity of operation predominated in the South and Southeast regions, while those with a low capacity of operations predominated in the North and Northeast. The regional differences in operation among Bipartite Interagency Committees suggest the influence of historical-structural variables (socioeconomic development, geographic barriers, characteristics of the health care system) in their capacity of intergovernmental health care management. However, structural problems can be overcome in some states through institutional and political changes. The creation of federal investments, varied by

  9. Experimental Study on Abrasive Waterjet Polishing of Hydraulic Turbine Blades

    International Nuclear Information System (INIS)

    Khakpour, H; Birglenl, L; Tahan, A; Paquet, F

    2014-01-01

    In this paper, an experimental investigation is implemented on the abrasive waterjet polishing technique to evaluate its capability in polishing of surfaces and edges of hydraulic turbine blades. For this, the properties of this method are studied and the main parameters affecting its performance are determined. Then, an experimental test-rig is designed, manufactured and tested to be used in this study. This test-rig can be used to polish linear and planar areas on the surface of the desired workpieces. Considering the number of parameters and their levels, the Taguchi method is used to design the preliminary experiments. All experiments are then implemented according to the Taguchi L 18 orthogonal array. The signal-to-noise ratios obtained from the results of these experiments are used to determine the importance of the controlled polishing parameters on the final quality of the polished surface. The evaluations on these ratios reveal that the nozzle angle and the nozzle diameter have the most important impact on the results. The outcomes of these experiments can be used as a basis to design a more precise set of experiments in which the optimal values of each parameter can be estimated

  10. The social shaping of innovation in polish companies

    DEFF Research Database (Denmark)

    Lorentzen, Anne

    2003-01-01

    The paper deals with strategies of innovation in Polish manufacturing companies. The point of departure is a theoretical framework of enterprise level innovation, and of the factors forming strategies of innovation on enterprise level. The paper analyses evidence from 23 Polish companies and pres......The paper deals with strategies of innovation in Polish manufacturing companies. The point of departure is a theoretical framework of enterprise level innovation, and of the factors forming strategies of innovation on enterprise level. The paper analyses evidence from 23 Polish companies...... and presents two cases more in detail. The analysis shows that the Polish companies have all been quite innovative, mostly in relation to product innovation. They choose innovation strategies, which are incremental more than radical, and they tend to differentiate their product range rather than to specialise....... They consider quality development a must in the fight for market shares and they adapt equipment and organisation to this goal. The factors forming and determining the strategies of the companies count the technological knowledge and expertise of the owner/founder, the structural changes of the market...

  11. [Adhesion of oral microorganisms on dental porcelain polished and glazed].

    Science.gov (United States)

    Wang, Yi-ning; Wen, Guo-jiang; Shi, Bin; Pan, Xin-hua

    2003-09-01

    This study compared the roughness of porcelain polished or glazed surfaces and the adhesion of oral streptococcus mutans to them in vitro. 30 porcelain samples were made. Porcelain samples in group A were polished with diamond paste. Porcelain samples were glazed in group B and were polished with Al2O3 (240#) bur in group C. Their roughness values were measured by profilometer. Standardized cell suspensions were incubated with test samples for one hour at 37 degrees C, then retained cells were counted by image analysis (percentage area of a microscopic field covered by cells). Roughness values of group A, B, C were respectively (0.1987 +/- 0.057) microm, (0.1990 +/- 0.091) microm, (0.4260 +/- 0.174) microm. There was no significantly difference between group A and group B. The roughness samples in group C were significantly rougher than that in the other groups. The amount of retained cells in group A, group B, group C was respectively (15.92 +/- 4.37)%, (16.39 +/- 6.31)% and (41.48 +/- 12.1)%. There was no significant difference between the cell adhesion on porcelain surface glazed and polished, but more bacteria adhered on the porcelain surface in group C. Porcelain surface polished treatment was clinically acceptable compared with its glazed. They all exhibited the least amount of bacteria adhesion. The more porcelain surface was rough, the more bacteria adhered on it.

  12. Initial polishing time affects gloss retention in resin composites.

    Science.gov (United States)

    Waheeb, Nehal; Silikas, Nick; Watts, David

    2012-10-01

    To determine the effect of finishing and polishing time on the surface gloss of various resin-composites before and after simulated toothbrushing. Eight representative resin-composites (Ceram X mono, Ceram X duo, Tetric EvoCeram, Venus Diamond, EsteliteSigma Quick, Esthet.X HD, Filtek Supreme XT and Spectrum TPH) were used to prepare 80 disc-shaped (12 mm x 2 mm) specimens. The two step system Venus Supra was used for polishing the specimens for 3 minutes (Group A) and 10 minutes (Group B). All specimens were subjected to 16,000 cycles of simulated toothbrushing. The surface gloss was measured after polishing and after brushing using the gloss meter. Results were evaluated using one way ANOVA, two ways ANOVA and Dennett's post hoc test (P = 0.05). Group B (10-minute polishing) resulted in higher gloss values (GV) for all specimens compared to Group A (3 minutes). Also Group B showed better gloss retention compared to Group A after simulated toothbrushing. In each group, there was a significant difference between the polished composite resins (P gloss after the simulated toothbrushing.

  13. Drafting & Design Technology. Technical Committee Report.

    Science.gov (United States)

    Idaho State Dept. of Education, Boise. Div. of Vocational Education.

    This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in drafting and design technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and…

  14. Applied Welding Technology. Technical Committee Report.

    Science.gov (United States)

    Idaho State Dept. of Education, Boise. Div. of Vocational Education.

    This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in applied welding technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and are…

  15. 75 FR 39910 - Dixie Resource Advisory Committee

    Science.gov (United States)

    2010-07-13

    ... introductions, review the Federal Advisory Committee Act requirements, brief participants on Payments to States legislative history, discuss the guidelines for Title II and Title III funding and proposals, discuss...., Eastern Standard Time, Monday through Friday. SUPPLEMENTARY INFORMATION: The meetings are open to the...

  16. 75 FR 29359 - Invasive Species Advisory Committee

    Science.gov (United States)

    2010-05-25

    ... Council is co-chaired by the Secretary of the Interior, the Secretary of Agriculture, and the Secretary of... of the most invaded marine/coastal environments in the world, with over 50 invasive species that... development of state invasive species councils. DATES: Meeting of the Invasive Species Advisory Committee...

  17. 21 CFR 26.73 - Joint Committee.

    Science.gov (United States)

    2010-04-01

    ... OF PHARMACEUTICAL GOOD MANUFACTURING PRACTICE REPORTS, MEDICAL DEVICE QUALITY SYSTEM AUDIT REPORTS, AND CERTAIN MEDICAL DEVICE PRODUCT EVALUATION REPORTS: UNITED STATES AND THE EUROPEAN COMMUNITY â... Committee with a view to bringing such new or additional procedures within the scope of that agreement and...

  18. 76 FR 72914 - Army Educational Advisory Committee

    Science.gov (United States)

    2011-11-28

    ...: U.S. Army War College Subcommittee of the Army Education Advisory Committee. Dates of Meeting: December 14, 2011. Place of Meeting: U.S. Army War College, 122 Forbes Avenue, Carlisle, PA, Command... issues and matters related to the continued growth and development of the United States Army War College...

  19. Polish physicians' cooperation with the pharmaceutical industry and its potential impact on public health.

    Directory of Open Access Journals (Sweden)

    Marta Makowska

    Full Text Available This article aims to describe how Polish physicians cooperate with the pharmaceutical industry and show how this relationship may pose a threat to public health.It considers the results of an online survey of 379 physicians. The survey was hosted by surveymonkey.com with links from a Polish physicians' website (Medycyna Praktyczna between 29 October 2013 and 31 December 2013. The sample was purposive, respondents having to be physicians working in Poland.The majority of respondents (96.8% said that they had talked with pharmaceutical sales representatives (PSRs in their practice, with 85% saying that they had had regular contact with them. Despite the existing legal ban in Poland, 35% of respondents admitted that they had usually met with PSRs in their office during working hours. As many as 81.8% of surveyed doctors said that they had taken part in an educational meeting organized by the pharmaceutical industry at least once during the 12 months preceding the study. A majority of the respondents (72.3% said they trusted the information provided by PSRs. Over one third of respondents (36.4% claimed that Polish doctors accepted gifts of a type that they should not accept according to Polish law.The study showed that Polish physicians cooperate in different ways with pharmaceutical companies and have frequent contact with them. This can influence their knowledge and doctors whose knowledge of drugs is based mainly on information from pharmaceutical industry materials may prescribe medicines in a biased way, possibly exposing their patients to sub-optimal treatments and burdening both their patients and the state budget with unnecessary costs. Lack of trust in doctors and pharmaceutical companies have other implications too: there may be a decline of faith in the efficacy of therapy and patients may be encouraged to engage in self-diagnosis and self-treatment. For these reasons it is necessary to increase transparency and strengthen the ethical

  20. Polish physicians' cooperation with the pharmaceutical industry and its potential impact on public health.

    Science.gov (United States)

    Makowska, Marta

    2017-01-01

    This article aims to describe how Polish physicians cooperate with the pharmaceutical industry and show how this relationship may pose a threat to public health. It considers the results of an online survey of 379 physicians. The survey was hosted by surveymonkey.com with links from a Polish physicians' website (Medycyna Praktyczna) between 29 October 2013 and 31 December 2013. The sample was purposive, respondents having to be physicians working in Poland. The majority of respondents (96.8%) said that they had talked with pharmaceutical sales representatives (PSRs) in their practice, with 85% saying that they had had regular contact with them. Despite the existing legal ban in Poland, 35% of respondents admitted that they had usually met with PSRs in their office during working hours. As many as 81.8% of surveyed doctors said that they had taken part in an educational meeting organized by the pharmaceutical industry at least once during the 12 months preceding the study. A majority of the respondents (72.3%) said they trusted the information provided by PSRs. Over one third of respondents (36.4%) claimed that Polish doctors accepted gifts of a type that they should not accept according to Polish law. The study showed that Polish physicians cooperate in different ways with pharmaceutical companies and have frequent contact with them. This can influence their knowledge and doctors whose knowledge of drugs is based mainly on information from pharmaceutical industry materials may prescribe medicines in a biased way, possibly exposing their patients to sub-optimal treatments and burdening both their patients and the state budget with unnecessary costs. Lack of trust in doctors and pharmaceutical companies have other implications too: there may be a decline of faith in the efficacy of therapy and patients may be encouraged to engage in self-diagnosis and self-treatment. For these reasons it is necessary to increase transparency and strengthen the ethical guidelines

  1. Polish physicians’ cooperation with the pharmaceutical industry and its potential impact on public health

    Science.gov (United States)

    2017-01-01

    Objective This article aims to describe how Polish physicians cooperate with the pharmaceutical industry and show how this relationship may pose a threat to public health. Methods It considers the results of an online survey of 379 physicians. The survey was hosted by surveymonkey.com with links from a Polish physicians’ website (Medycyna Praktyczna) between 29 October 2013 and 31 December 2013. The sample was purposive, respondents having to be physicians working in Poland. Results The majority of respondents (96.8%) said that they had talked with pharmaceutical sales representatives (PSRs) in their practice, with 85% saying that they had had regular contact with them. Despite the existing legal ban in Poland, 35% of respondents admitted that they had usually met with PSRs in their office during working hours. As many as 81.8% of surveyed doctors said that they had taken part in an educational meeting organized by the pharmaceutical industry at least once during the 12 months preceding the study. A majority of the respondents (72.3%) said they trusted the information provided by PSRs. Over one third of respondents (36.4%) claimed that Polish doctors accepted gifts of a type that they should not accept according to Polish law. Conclusions The study showed that Polish physicians cooperate in different ways with pharmaceutical companies and have frequent contact with them. This can influence their knowledge and doctors whose knowledge of drugs is based mainly on information from pharmaceutical industry materials may prescribe medicines in a biased way, possibly exposing their patients to sub-optimal treatments and burdening both their patients and the state budget with unnecessary costs. Lack of trust in doctors and pharmaceutical companies have other implications too: there may be a decline of faith in the efficacy of therapy and patients may be encouraged to engage in self-diagnosis and self-treatment. For these reasons it is necessary to increase transparency

  2. Standing Concertation Committee

    CERN Document Server

    HR Department

    2009-01-01

    Main points examined at the meeting of 24 June 2009 Results of the 2009 MARS exercise The Committee took note of the results of the 2009 MARS exercise presented by the Head of the HR Department, expressing satisfaction for the early availability of the statistics and for the fact that the analysis of the results covered the last three years. Status report on the work on the five-yearly review The Committee took note of a presentation by P. Gildemyn on the data collection procedure for the 2010 five-yearly review (staff, fellows, associate members of the personnel, CHIS) and of the proposed work schedule. Implications for employment conditions of the discussions at the Finance Committee and Council on 17 and 18 June 2009 The Chairman briefly reported on the discussions at the meetings of the Finance Committee and Council in June 2009, on the 2010-2014 medium-term plan and the 2010 preliminary draft budget, as well as on the modified strategy and goals for 2009. The Committee ...

  3. BIOGAS - is it chance or risk for the Polish gas industry?

    International Nuclear Information System (INIS)

    Witek, M.

    2008-01-01

    This paper presents the present state and some aspects of strategy development concerning Polish biogas plants. The paper focuses on the biogas plants supplied by agricultural raw materials and its biogas production potential. A perspective of production and usage of bio methane in Poland was discussed. An example of commercial agricultural biogas plant connected with cogeneration and natural gas production in local community in Austria was presented. A possibility of financial support of bio methane projects by various programs of European Union in years 2007-2013 was analyzed. Special attention in analysis was given to perspective of possible bio methane production in Poland. (author)

  4. Monitoring of the stability of underground workings in Polish copper mines conditions

    Science.gov (United States)

    Fuławka, Krzysztof; Mertuszka, Piotr; Pytel, Witold

    2018-01-01

    One of the problems associated with the excavation of deposit in underground mines is the local disturbance in a state of unstable equilibrium results in the sudden release of energy, mainly in the form of roof falls. The scale and intensity of this type of events depends on a number of factors. To minimize the risk of instability occurrence, continuous observations of the roof strata condition are recommended. Different roof strata observation methods used in the Polish copper mines have been analysed within the framework of presented paper. In addition, selected prospective methods, which could significantly increase efficiency of rock fall prevention are presented.

  5. Materials of All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection

    International Nuclear Information System (INIS)

    2005-01-01

    The All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection is cyclic (in 3 year period) conference being a broad review of state of art and development of all nuclear branches cooperated with industry and other branches of national economy and public life in Poland. The conference has been divided in one plenary session and 6 problem sessions as follow: Environmental protection, earth sciences, protection of cultural objects; Industrial applications; applications in medicine, medical apparatus; measurement methods, simulations, experiment planning; radiation techniques; laboratories, metrology

  6. Some internationl law elements of national nuclear regulations from the Polish point of view

    International Nuclear Information System (INIS)

    Gadkowski, T.

    1992-01-01

    The essential contents of the Polish Nuclear Act from 1986 reflects on one hand needs and possibilities of the industrial use of nuclear energy and, on the other, international obligations of Poland. Poland is a State with a limited activity regarding to industrial use of nuclear energy; the main international-law elements of national nuclear regulations can be described as follows: 1. The good-neighborliness principle concerning the siting of nuclear installations in border areas. 2. An adequate concept of nuclear damage. 3. An adequate concept of liability for nuclear damage. (orig./HSCH)

  7. Materials of 45. Scientific Assembly of Polish Chemical Society. Volumes 1-3

    International Nuclear Information System (INIS)

    2002-01-01

    Scientific assemblies of Polish Chemical Society are the most important chemical meeting organised annually in Poland. Basic as well as application studies in all chemical branches have been extensively presented. The next subjects was proposed as scientific sessions and symposia topics: organic chemistry, inorganic chemistry, physical chemistry, analytical chemistry, technology and chemical engineering, polymer chemistry, solid state chemistry, catalysis, biological chemistry, chemistry and technology of coal, environmental protection, didactics of chemistry, history of chemistry, young scientist forum, flow analysis, and high-energy materials

  8. Polish Revolt of 1863 in Destinies of Old Believers of the Northwest Territory of Russian Empire

    Directory of Open Access Journals (Sweden)

    Александр Юрьевич Бендин

    2011-03-01

    Full Text Available The article is devoted to the problems of a legal status of Old Believers of Russian empire in the middle of 19th century. The comparative analysis of the Russian legislation allows the author to draw a conclusion on religious intolerance of the state and «prevailing» Orthodox Church to the old belief population of empire. The special attention is paid to the position of Old Believers of Northwest Territory who during the Polish revolt in 1863 acted on the side of Russia. The reaction of the territory administration to attempts of Old Believers to expand border of religious freedom is considered in the article.

  9. Materials of jubilee scientific assembly of the Polish Chemical Society, Warsaw'94. Homo chemicus

    International Nuclear Information System (INIS)

    1994-01-01

    The Jubilee Scientific Assembly of the Polish Chemical Society has been held in 1994 in Warsaw. The general view on scientific progress in chemistry in Poland has been presented during plenary session. The conference has been divided into 15 sessions and 3 microsymposia covering the most important research fields in chemistry. Sessions topics were: analytical chemistry, chemistry of solid state materials, physical chemistry, coordination chemistry, medical chemistry, chemistry of metalorganic compounds, inorganic chemistry, organic chemistry, chemistry of polymers, young scientists forum, didactics and history of chemistry, catalysis, crystallochemistry, chemical technology, environment protection. Microsymposia's topics were as follows: chemistry of saccharides, electrochemistry, membranes and membrane processes

  10. 76 FR 70444 - Environmental Economics Advisory Committee Augmented for the Consideration of the Value of Water...

    Science.gov (United States)

    2011-11-14

    ... ENVIRONMENTAL PROTECTION AGENCY [FRL-9491-7] Environmental Economics Advisory Committee Augmented... Economics Advisory Committee to provide early advice on the value of water to the United States (U.S... to FACA and EPA policy, notice is hereby given that the Environmental Economics Advisory Committee...

  11. 77 FR 16205 - National Defense Stockpile Market Impact Committee Request for Public Comments on the Potential...

    Science.gov (United States)

    2012-03-20

    .... The Committee is seeking public comments on the potential market impact of the material research and... Defense Stockpile Market Impact Committee Request for Public Comments on the Potential Market Impact of... National Defense Stockpile Market Impact Committee, co-chaired by the Departments of Commerce and State, is...

  12. 28 CFR 0.10 - Attorney General's Advisory Committee of U.S. Attorneys.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Attorney General's Advisory Committee of... DEPARTMENT OF JUSTICE Office of the Attorney General § 0.10 Attorney General's Advisory Committee of U.S. Attorneys. (a) The Attorney General's Advisory Committee of United States Attorneys shall consist of an...

  13. The Jewish minority in the Second Polish Republic: the activities of the Board of the Jewish Community in Lvov during the years 1919–1924

    Directory of Open Access Journals (Sweden)

    Koziński Bartosz

    2016-12-01

    Full Text Available The purpose of this article is to analyze data on the functioning of the Jewish Community in Lvov during the years 1919-1924. The indicated problems will enable to show the functioning of the Jewish minority in the conditions of the reviving Polish state - both in socio-political terms, and in the organizational aspect. It is particularly important to show the Jewish minority opinion about the conditions of Second Polish Republic. Additionally, this article will help restore the memory of the individual members of the Jewish community in Lvov. The selected issue is a part of the research conducted on a larger scale, whose aim is to enrich knowledge and overcome the deficit of research in the science of politics on the concept of ethnic policy - proposed in the years 1939-1947 by the Polish government in exile. The fundamental finding of the analysis is the fact, that the Board accepted the Polish state and the dominant role of the Polish nation in the system of democratic political power.

  14. Radon contamination problems in North Dakota. Hearing before the Committee on Environment and Public Works, United States Senate, One Hundredth Congress, First Session, August 20, 1987

    International Nuclear Information System (INIS)

    Anon.

    1987-01-01

    From tests of 200 homes in North Dakota in over 25 cities and towns, the Department of Health estimates that as many as 50% of all homes in the state may have radon levels above the EPA-recommended safety level, at this hearing in Fargo, ten witnesses included university professors, state and local health authorities, and the North Dakota Association of Realtors. US Sen. Quentin N. Burdick of North Dakota, who chaired the hearing, pointed out that the recently passed Radon Program Development Act (1) provide seed money to help states get radon programs up and running; (2) requires EPA to conduct surveys in Federal buildings; and (3) requires EPA to determine the extent of radon contamination in the Nation's schools. He recommends that North Dakota take advantage of this Federal assistance

  15. Primary system fission product release and transport: A state-of-the-art report to the committee on the safety of nuclear installations

    International Nuclear Information System (INIS)

    Wright, A.L.

    1994-06-01

    This report presents a summary of the status of research activities associated with fission product behavior (release and transport) under severe accident conditions within the primary systems of water-moderated and water-cooled nuclear reactors. For each of the areas of fission product release and fission product transport, the report summarizes relevant information on important phenomena, major experiments performed, relevant computer models and codes, comparisons of computer code calculations with experimental results, and general conclusions on the overall state of the art. Finally, the report provides an assessment of the overall importance and knowledge of primary system release and transport phenomena and presents major conclusions on the state of the art

  16. Primary system fission product release and transport. A state-of-the-art report to the committee on the safety of nuclear installations

    International Nuclear Information System (INIS)

    Wright, A.L.

    1994-06-01

    This report presents a summary of the status of research activities associated with fission product behavior (release and transport) under severe accident conditions within the primary systems of water-moderated and water-cooled nuclear reactors. For each of the areas of fission product release and fission product transport, the report summarizes relevant information on important phenomena, major experiments performed, relevant computer models and codes, comparisons of computer code calculations with experimental results, and general conclusions on the overall state of the art. Finally, the report provides an assessment of the overall importance and knowledge of primary system release and transport phenomena and presents major conclusions on the state of the art

  17. Primary system fission product release and transport: A state-of-the-art report to the committee on the safety of nuclear installations

    Energy Technology Data Exchange (ETDEWEB)

    Wright, A.L. [Oak Ridge National Lab., TN (United States)

    1994-06-01

    This report presents a summary of the status of research activities associated with fission product behavior (release and transport) under severe accident conditions within the primary systems of water-moderated and water-cooled nuclear reactors. For each of the areas of fission product release and fission product transport, the report summarizes relevant information on important phenomena, major experiments performed, relevant computer models and codes, comparisons of computer code calculations with experimental results, and general conclusions on the overall state of the art. Finally, the report provides an assessment of the overall importance and knowledge of primary system release and transport phenomena and presents major conclusions on the state of the art.

  18. Material removal mechanisms in electrochemical-mechanical polishing of tantalum

    International Nuclear Information System (INIS)

    Gao, F.; Liang, H.

    2009-01-01

    Material removal mechanisms in tantalum chemical-mechanical polishing (CMP) and electrochemical-mechanical polishing (ECMP) were investigated using the single frequency electrochemical impedance spectroscopy (EIS). Through measuring the impedance of the tantalum surface, the single frequency EIS scan made it possible to observe the CMP and ECMP processes in situ. The impedance results presented competing mechanisms of removal and formation of a surface oxide layer of tantalum. Analysis indicated that the thickness of the oxide layer formed during polishing was related to the mechanical power correlated to the friction force and the rotating speed. Furthermore, the rate of growth and removal of the oxide film was a function of the mechanical power. This understanding is beneficial for optimization of CMP and ECMP processes.

  19. Research on Grinding and Polishing Force Control of Compliant Flange

    Directory of Open Access Journals (Sweden)

    Li Chuang

    2015-01-01

    Full Text Available The automation of the grinding and polishing process is important to improve the production efficiency of the part surfaces. In this paper, a new compliant flange mounted on the end of the industrial robots for the robotic grinding and polishing force control is developed. With regard to the non-linear and time-varying problem of the contact force, the mathematical model of the new force control system was presented and the fuzzy PID control strategy was used to drive the proposed system. Especially, the air spring and electric proportional valve is studied to establish the model. The simulation results show that the selected control strategy has quick response and good robustness, which satisfies the real-time requirements of the grinding and polishing force control in processing.

  20. [Polish medical ethics in the period 1945-1980].

    Science.gov (United States)

    Wichrowski, Marek

    2003-01-01

    The purpose of this article is o present that main currents of Polish medical ethics in the years 1945-1980, which the author treats as the 'prehistory' of Poland's contemporary bioethics. The author begins by ascertaining the post-war disappearance of two Polish traditions--that of the Warsaw school of philosopher-physicians (known in the West as the Polish School of Philosophy of Medicine) and the Lwów-Warsaw School of Philosophy. The political system that come into being after 1945 was not conducive to the development of medical ethics, but several clear orientations may be discerned in the utterances of physicians, lawyers, moral technologlans and academic philosophers. The analysis begins with Catholic ethics in its archaic 1950s-vintage form. The author then presents the thinking of ethicians Independent of both the Church and Marxism (the milieu of the journal 'Etyka') as well as the deontological writings of physicians.

  1. Development of clean chemical mechanical polishing systems; Clean CMP system

    Energy Technology Data Exchange (ETDEWEB)

    Tsujimura, M.; Hosokawa, M. [Ebara Corp., Tokyo (Japan)

    1998-10-20

    Described herein are clean chemical mechanical polishing (CMP) systems developed by Ebara. A CMP system needs advanced peripheral techniques, in addition to those for grinding adopted by the conventional system, in order to fully exhibit its inherent functions. An integrated design concept is essential for the CMP steps, including slurry supplying, polishing, washing, process controlling and waste fluid treatment. The Ebara has adopted a standard concept `Clean CMP, dry-in and dry-out of wafers,` and provided world`s highest grades of techniques for inter-layer insulating film, shallow trench isolation, plug and wiring. The head for the polishing module is specially designed by FEM, to improve homogeneity of wafers from the center to edges. The dresser is also specially designed, to improve pad surface topolody after dressing. A slurry dipsersing method is developed to reduce slurry consumption. Various washing modules, designed to have the same external shape, can be allocated to various functions. 10 figs.

  2. Polish country study to address climate change: Strategies of the GHG`s emission reduction and adaptation of the Polish economy to the changed climate. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-01

    The Polish Country Study Project was initiated in 1992 as a result of the US Country Study Initiative whose objective was to grant the countries -- signatories of the United Nations` Framework Convention on Climate Change -- assistance that will allow them to fulfill their obligations in terms of greenhouse gases (GHG`s) inventory, preparation of strategies for the reduction of their emission, and adapting their economies to the changed climatic conditions. In February 1993, in reply to the offer from the United States Government, the Polish Government expressed interest in participation in this program. The Study proposal, prepared by the Ministry of Environmental Protection, Natural Resources and Forestry was presented to the US partner. The program proposal assumed implementation of sixteen elements of the study, encompassing elaboration of scenarios for the strategy of mission reduction in energy sector, industry, municipal management, road transport, forestry, and agriculture, as well as adaptations to be introduced in agriculture, forestry, water management, and coastal management. The entire concept was incorporated in macroeconomic strategy scenarios. A complementary element was the elaboration of a proposal for economic and legal instruments to implement the proposed strategies. An additional element was proposed, namely the preparation of a scenario of adapting the society to the expected climate changes.

  3. Development of hybrid fluid jet/float polishing process

    Science.gov (United States)

    Beaucamp, Anthony T. H.; Namba, Yoshiharu; Freeman, Richard R.

    2013-09-01

    On one hand, the "float polishing" process consists of a tin lap having many concentric grooves, cut from a flat by single point diamond turning. This lap is rotated above a hydrostatic bearing spindle of high rigidity, damping and rotational accuracy. The optical surface thus floats above a thin layer of abrasive particles. But whilst surface texture can be smoothed to ~0.1nm rms (as measured by atomic force microscopy), this process can only be used on flat surfaces. On the other hand, the CNC "fluid jet polishing" process consists of pumping a mixture of water and abrasive particles to a converging nozzle, thus generating a polishing spot that can be moved along a tool path with tight track spacing. But whilst tool path feed can be moderated to ultra-precisely correct form error on freeform optical surfaces, surface finish improvement is generally limited to ~1.5nm rms (with fine abrasives). This paper reports on the development of a novel finishing method, that combines the advantages of "fluid jet polishing" (i.e. freeform corrective capability) with "float polishing" (i.e. super-smooth surface finish of 0.1nm rms or less). To come up with this new "hybrid" method, computational fluid dynamic modeling of both processes in COMSOL is being used to characterize abrasion conditions and adapt the process parameters of experimental fluid jet polishing equipment, including: (1) geometrical shape of nozzle, (2) position relative to the surface, (3) control of inlet pressure. This new process is aimed at finishing of next generation X-Ray / Gamma Ray focusing optics.

  4. Women Entrepreneurs: Their Success and Problems. Hearing before the Committee on Small Business, United States Senate, Ninety-Eighth Congress, Second Session (Eugene, Oregon).

    Science.gov (United States)

    Congress of the U.S., Washington, DC. Senate Committee on Small Business.

    This is a congressional hearing to acquire testimony and information about women in business or about unusual problems that have been found. Testimony includes statements from individuals representing Big Bear Shopper, Inc.; United States Business and Professional Women (BPW/USA); Rural Small Business Programs, Lane Community College;…

  5. Crisis in Science and Math Education. Hearing before the Committee on Governmental Affairs, United States Senate. One Hundred First Congress, First Session.

    Science.gov (United States)

    Congress of the U.S., Washington, DC. Senate Committee on Environment and Public Works.

    This document contains the transcript of a senate hearing on the crisis in science and math education. The document includes the opening statements of Senators Glenn, Kohl, Bingaman, Lieberman, Heinz, and Sasser, and the testimony of seven witnesses including: Honorable Mark O. Hatfield, Senator from the State of Oregon; Carl Sagan, Ph.D. Cornell…

  6. Saving Our Seniors: Preventing Elder Abuse, Neglect, and Exploitation. Hearing before the Special Committee on Aging, United States Senate, One Hundred Seventh Congress, First Session.

    Science.gov (United States)

    Congress of the U.S., Washington, DC. Senate Special Committee on Aging.

    In this report of a congressional hearing, testimony includes statements and prepared statements of these four senators: John Breaux, Larry Craig, Debbie Stabenow, and Herbert Kohl. Panel I is presented by the Acting Assistant Attorney General, United States (U.S.) Department of Justice. Panel II consists of individuals representing the National…

  7. Food Assistance: Efforts To Control Fraud and Abuse in the Child and Adult Care Food Program Should Be Strengthened. United States General Accounting Office Report to Congressional Committees.

    Science.gov (United States)

    Robertson, Robert E.

    The Child and Adult Care Food Program provides over $1.5 billion in benefits annually to children and adults in day care. In order to address the longstanding problems of fraud and abuse present in the program, state agencies have been charged with the responsibility for implementing Food and Nutrition Service's (FNS) regulations to prevent and…

  8. 75 FR 27614 - Shipping Coordinating Committee; Notice of Committee Meeting

    Science.gov (United States)

    2010-05-17

    ... Environment Protection Committee. --Consideration of the report of the Maritime Safety Committee... Session of the International Maritime Organization (IMO) Council to be held at the IMO headquarters in... HNS Convention. --World Maritime University: --IMO International Maritime Law Institute: --Protection...

  9. Polish Perceptions on the Immigration Influx: a Critical Analysis

    Directory of Open Access Journals (Sweden)

    Kinga Hódor

    2017-02-01

    Full Text Available The article addresses the issue of Poles’ attitude to the problem of the influx of migrants to Poland in the context of the migration crisis, which Europe has to face today. The issues discussed in the present paper are aimed to illustrate the characteristic features specific to Poles’ attitudes in favor of or against the process of influx of migrants to the E.U. Member States or Poland. The analysis covers both positive and negative aspects of migration to Poland, which have been most often indicated by Poles with respects to migrants. On the one hand, they include fears with regard to national security, potential conflicts of cultural and religious background, fear of the alleged loss of jobs to migrants and their preying on the country’s social security system. All of the above result in anti-migration demonstrations and the language of hatred. On the other hand, positive aspects of the migration influx are believed to consist in cultural enrichment, benefits for the labor market resulting from the inflow of both qualified professionals and laborers with lower pay expectations in comparison to Polish workers and believing that migrants might be the chance of minimize the negative effects of the demographic crisis. The supporters of helping migrants also point out the issue of solidarity and sympathy for the victims and the fact that in the past it was the Poles who received support from other countries in Poland’s difficult moments. Thus, extending such help to others may prove to be beneficial in the future. The present paper is based on academic articles, internet sources and statistical data, which all reveal a division into two camps: supporters and opponents of receiving migrants in Poland, which prevents determining Poland’s definitive stance on this issue. All the aspects of the problem discussed in the paper are undoubtedly a basis for further analysis.

  10. Barriers and Limitations of Mentoring in Polish Organizations

    Directory of Open Access Journals (Sweden)

    Joanna Mesjasz

    2013-09-01

    Full Text Available In Polish organizations one can recognize a lot of barriers in the mentoring implementation. According to the author, at the root of these barriers are hierarchies of values: social, national, organizational, and hierarchies of values represented by individual employees. The purpose of this article is to trace the sources of constraints in the mentoring implementation process. The analysis is carried out on several levels: from the broadest social perspective, through the national to the perspective of the organization. In the article, there are also presented actions that should be taken by Polish organizations to overcome barriers and constraints in the mentoring implementation process.

  11. Recurrent APC gene mutations in Polish FAP families

    Directory of Open Access Journals (Sweden)

    Pławski Andrzej

    2007-12-01

    Full Text Available Abstract The molecular diagnostics of genetically conditioned disorders is based on the identification of the mutations in the predisposing genes. Hereditary cancer disorders of the gastrointestinal tracts are caused by mutations of the tumour suppressor genes or the DNA repair genes. Occurrence of recurrent mutation allows improvement of molecular diagnostics. The mutation spectrum in the genes causing hereditary forms of colorectal cancers in the Polish population was previously described. In the present work an estimation of the frequency of the recurrent mutations of the APC gene was performed. Eight types of mutations occurred in 19.4% of our FAP families and these constitute 43% of all Polish diagnosed families.

  12. Mechanistic, kinetic, and processing aspects of tungsten chemical mechanical polishing

    Science.gov (United States)

    Stein, David

    This dissertation presents an investigation into tungsten chemical mechanical polishing (CMP). CMP is the industrially predominant unit operation that removes excess tungsten after non-selective chemical vapor deposition (CVD) during sub-micron integrated circuit (IC) manufacture. This work explores the CMP process from process engineering and fundamental mechanistic perspectives. The process engineering study optimized an existing CMP process to address issues of polish pad and wafer carrier life. Polish rates, post-CMP metrology of patterned wafers, electrical test data, and synergy with a thermal endpoint technique were used to determine the optimal process. The oxidation rate of tungsten during CMP is significantly lower than the removal rate under identical conditions. Tungsten polished without inhibition during cathodic potentiostatic control. Hertzian indenter model calculations preclude colloids of the size used in tungsten CMP slurries from indenting the tungsten surface. AFM surface topography maps and TEM images of post-CMP tungsten do not show evidence of plow marks or intergranular fracture. Polish rate is dependent on potassium iodate concentration; process temperature is not. The colloid species significantly affects the polish rate and process temperature. Process temperature is not a predictor of polish rate. A process energy balance indicates that the process temperature is predominantly due to shaft work, and that any heat of reaction evolved during the CMP process is negligible. Friction and adhesion between alumina and tungsten were studied using modified AFM techniques. Friction was constant with potassium iodate concentration, but varied with applied pressure. This corroborates the results from the energy balance. Adhesion between the alumina and the tungsten was proportional to the potassium iodate concentration. A heuristic mechanism, which captures the relationship between polish rate, pressure, velocity, and slurry chemistry, is presented

  13. Implementation of the Bulgarian-Polish online dictionary

    Directory of Open Access Journals (Sweden)

    Ludmila Dimitrova

    2015-11-01

    Full Text Available Implementation of the Bulgarian-Polish online dictionary The paper describes the implementation of an online Bulgarian-Polish dictionary as a technological tool for applications in digital humanities. This bilingual digital dictionary is developed in the frame of the joint research project “Semantics and Contrastive Linguistics with a focus on a bilingual electronic dictionary” between IMI-BAS and ISS-PAS, supervised by L. Dimitrova (IMI-BAS and V. Koseska-Toszewa (ISS-PAS. In addition, the main software tools for web-presentation of the dictionary are described briefly.

  14. Confocal Raman spectrocopy for the analysis of nail polish evidence.

    Science.gov (United States)

    López-López, Maria; Vaz, Joana; García-Ruiz, Carmen

    2015-06-01

    Nail polishes are cosmetic paints that may be susceptible of forensic analysis offering useful information to assist in a crime reconstruction. Although the nail polish appearance could allow a quick visual identification of the sample, this analysis is subjected to the perception and subjective interpretation of the forensic examiner. The chemical analysis of the nail polishes offers great deal of information not subjected to analyst interpretation. Confocal Raman spectroscopy is a well-suited technique for the analysis of paints due to its non-invasive and non-destructive nature and its ability to supply information about the organic and inorganic components of the sample. In this work, 77 regular and gel nail polishes were analyzed with confocal Raman spectroscopy using two laser wavelengths (532 and 780 nm). The sample behavior under the two laser wavelengths and the differences in the spectra taken at different points of the sample were studied for each nail polish. Additionally, the spectra obtained for all the nail polishes were visually compared. The results concluded that the longer laser wavelength prevents sample burning and fluorescence effects; the similarity among the spectra collected within the sample is not directly related with the presence of glitter particles; and 64% of the samples analyzed showed a characteristic spectrum. Additionally, the use of confocal Raman spectroscopy for the forensic analysis of nail polishes evidence in the form of flakes or smudges on different surfaces were studied. The results showed that both types of evidence can be analyzed by the technique. Also, two non-invasive sampling methods for the collection of the evidence from the nails of the suspect or the victim were proposed: (i) to use acetone-soaked cotton swabs to remove the nail varnishes and (ii) to scrape the nail polish from the nail with a blade. Both approaches, each exhibiting advantages and drawbacks in terms of transport and handling were appropriate

  15. International Round Table “Tatar Materials in Polish Archives” (Warsaw, 31st March – 1st April, 2016

    Directory of Open Access Journals (Sweden)

    M.M. Gibatdinov

    2016-12-01

    Full Text Available This article present a short report on the International round table “Tatar materials in Polish archives” organized in Warsaw on March 31 – April 1, 2016. Round table was a result of international scientific cooperation between Marjani Institute of History, Polish Academy of Sciences, University of Warsaw, Institute for Caucasian-, Tatar- and Turkestan Studies (ICATAT. It was a part of the long-term research project “Tatar Materials in Foreign Archives” carried out by the Marjani Institute of History in the framework of State Program of the Republic of Tatarstan “Preserving of Tatar Ethnical Identity (for years 2014–2016.” The following papers was presented on the round table: “On results of recent researches of Tatar materials in Polish archives” by Prof., Dr. Dariusz Kołodziejczyk, Director of the Institute of History, University of Warsaw; “The New Records of Old Heritage – Documents about Tatars from Regional and Private Archives in Polish-German Context”, by Dr. Mieste Hottop-Riecke, Director of ICATAT and Dr. Stephan Theilig, Director of Brandenburg-Preußen Museum Wustrau; “Maniere de Faire la Guerre des Tartares’ as Hybrid War in the Military Art of Crimean and Dobruja Tatars in the Early modern Time”, by Dr. Andrzej Gliwa, University of Warsaw, Department of History, Faculty Member; “Tatar Documents in Archives and Museums in Bialystok” by Dr. Artur Konopacki, Assistant Professor in Faculty of Pedagogy and Psychology, University of Bialystok; ”The first results of international research project ”Yazma Miras – Written Heritage” by Marat Gibatdinov. Participants of round table discussed a possible prospects for future cooperation in the field of researching and digitalizing of Tatar materials from Polish archives. During the conference the meetings with the representatives of Tatar community in Poland and Lithuania was organized, as well as the study visits to the Tatar Mosque and Tatar

  16. ACCU: a committee that addresses Users' needs

    CERN Multimedia

    Anaïs Schaeffer

    2013-01-01

    This year, the Advisory Committee of CERN Users (ACCU) celebrates its 25th anniversary. Created in its modern form in December 1988 - at a time when the number of users was about 1,500 - the committee still defends the interests of today’s users, now numbering around 11,000.   Actually, the first ACCU was established in 1977. Demanded by the rising number of Users, the need for such a committee arose during the 127th Meeting of Committee of Council (as stated in this official document): “In view of the large number and diversity of CERN Users, it has become apparent for some time that it would be useful to have an organised channel of consultation between the CERN direction and a representative group of CERN Users.” Michael Hauschild, ACCU Secretary since 2010, explains: “At that time, there were fewer ACCU members, and not all the countries were represented. With the birth of the modern form of the committee, in 1988, the decision to have representatives ...

  17. 76 FR 72204 - Renewal of Advisory Committee Charter

    Science.gov (United States)

    2011-11-22

    .... II. Structure The Committee shall consist of 17 members appointed by the Bank's Board of Directors on..., services, and State government, with not less than three members being representative of the small business... members being representative of the [[Page 72205

  18. Report of the Commission to Study the Adequacy and Equity of Certain Cost Components of the School Funding Formula. Report to Joint Standing Committee on Education and Cultural Affairs, Maine State Legislature

    Science.gov (United States)

    Center for Education Policy, Applied Research, and Evaluation, 2015

    2015-01-01

    The Commission to Study the Adequacy and Equity of Certain Cost Components of the School Funding Formula was created in legislation crafted by the Joint Standing Committee on Education of the 126th Legislature (the "Education Committee"). The legislation was enacted as Resolve 2014, chapter 114. Creation of the Commission is the latest…

  19. SOCIAL CONTROL IN THE STATE SYSTEM OF INCENTIVES FOR ENVIRONMENTAL SERVICES IN ACRE: REPORT ABOUT THE EXPERIENCE OF IMPLEMENTATION AND OPERATION OF THE LOCAL STANDARDS COMMITTEE

    Directory of Open Access Journals (Sweden)

    Ayri Saraiva Rando

    2015-05-01

    Full Text Available The social control, the participation and the transparency are important aspects in the policies of incentives and payment for environmental services. The State Commission for Validation and Monitoring - CEVA is the college responsible for ensuring transparency and exert the social control of the State System of Incentives for Environmental Services in Acre - SISA. This article discusses the difficulty in ensuring the transparency in relation to the provided steps in the implementation of social and environmental standards for REDD +, therefore, it is intended to monitor the level of transparency of this commission from the comparison of the provided publications in the guidance document of the International Initiative for the implementation of the mentioned standards with the made publications. The methods used are literature review and documentary survey. Against expected results, the article in question provides a complementary effort to the project of institutionalization of social and environmental standards for REDD + in SISA, with respect to the publication and transparency in the implementation process of the safeguards in this state.

  20. 75 FR 43156 - Federal Advisory Committee; Missile Defense Advisory Committee

    Science.gov (United States)

    2010-07-23

    ... DEPARTMENT OF DEFENSE Office of the Secretary Federal Advisory Committee; Missile Defense Advisory Committee AGENCY: Missile Defense Agency (MDA), DoD. ACTION: Notice of closed meeting. SUMMARY: Under the... Defense announces that the Missile Defense Advisory Committee will meet on August 4 and 5, 2010, in...

  1. Chemical Mechanical Polishing of Ruthenium, Cobalt, and Black Diamond Films

    Science.gov (United States)

    Peethala, Brown Cornelius

    Ta/TaN bilayer serves as the diffusion barrier as well as the adhesion promoter between Cu and the dielectric in 32 nm technology devices. A key concern of future technology devices (layer (vs. a bilayer of Ta/TaN) to act as a barrier. During patterning, they need to be planarized using conventional chemical mechanical polishing (CMP) to achieve a planar surface. However, CMP of these new barrier materials requires novel slurry compositions that provide adequate selectivity towards Cu and dielectric films, and minimize galvanic corrosion. Apart from the application as a barrier, Ru also has been proposed as a lower electrode material in metal-insulator-metal capacitors where high (> 50 nm/min) Ru removal rates (RRs) are required and as a stop layer in magnetic recording head fabrication where low (hydroxide (KOH). It was also determined that increased the ionic strength is not responsible for the observed increase in Ru removal rate. Benzotirazole (BTA) and ascorbic acid were added to the slurry to reduce the open circuit potential (Eoc) difference between Cu and Ru to ˜20 mV from about 550 mV in the absence of additives. A removal mechanism with KIO4 as the oxidizing agent is proposed based on the formation of several ruthenium oxides, some of which formed residues on the polishing pad below a pH of ˜7. Next, a colloidal silica-based slurry with hydrogen peroxide (H 2O2) as the oxidizer (1 wt%), and arginine (0.5 wt%) as the complexing agent was developed to polish Co at pH 10. The Eoc between Cu and Co at the above conditions was reduced to ˜20 mV compared to ˜250 mV in the absence of additives, suggestive of reduced galvanic corrosion during the Co polishing. The slurry also has the advantages of good post-polish surface quality at pH 10, and no dissolution rate. BTA at a concentration of 5mM in this slurry inhibited Cu dissolution rates and yielded a Cu/Co RR ratio of ˜0.8:1 while the open potential difference between Cu and Co was further reduced to ˜10

  2. Materials of 44. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry

    International Nuclear Information System (INIS)

    2001-01-01

    Scientific assemblies of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry are the most important chemical meeting organised annually in Poland. Basic as well as application studies in all chemical branches have been extensively presented. The next subjects was proposed as scientific sessions and symposia topics: solid state chemistry; didactics of chemistry; electrochemistry; biologically active compounds; geochemistry; organic chemistry; physical chemistry; environment quality and protection; coordination chemistry; chemical technology; polymers; explosive materials; analytical chemistry; theoretical chemistry

  3. The impact of medical tourism on the quality of organizational and functional changes in the Polish healthcare system

    OpenAIRE

    Olkiewicz, Marcin

    2016-01-01

    The role of Medical Tourism in the process of a complex satisfaction of the prosumers and the impact played in the organizational and functional changes in the Polish healthcare system. The analysis of the literature on the subject as well as an analysis of the documentation were the inspiration to write this work. The main emphasis was put on stating the conditions stimulating the development of this sector of the economy as well as the risk factors determining the quality of pro...

  4. Materials of 47. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry. Volume 3

    International Nuclear Information System (INIS)

    2004-01-01

    Scientific assemblies of Polish Chemical Society are the most important chemical meeting organised annually in Poland. Basic as well as application studies in all chemical branches have been extensively presented. The next subjects was proposed as scientific sessions and symposia topics: organic chemistry, inorganic chemistry, physical chemistry, analytical chemistry, technology and chemical engineering, polymer chemistry, solid state chemistry, catalysis, biological chemistry, chemistry and technology of coal, environmental protection, didactics of chemistry, history of chemistry, young scientist forum

  5. Simulation and analysis of an alternative kinematics for improving the polishing uniformity over the surface of polished tiles

    Directory of Open Access Journals (Sweden)

    Weingaertner, W. L.

    2010-10-01

    Full Text Available The present work investigates the possibility of adopting a new kinematics at the industrial polishing lines of porcelain stoneware tile. An alternative motion of the transverse oscillation of the polishing heads is proposed, in which no radical changes in the industries facilities are required. The basic idea is to replace the purely sinus motion of the polishing heads by a rather trapezoid wavelike motion. In theory this could be achieved simply by adopting regular delays at the transverse oscillation motion. Consequences of this alternative kinematics were quantitatively analyzed considering the spatial homogeneity of polishing expected for tiles. Such homogeneity was represented by the coefficient of variation of the distribution of polishing time over the surface, which was in turn determined by means of computational simulations, taking into account the effect of multiple polishing heads.

    El presente trabajo investiga la posibilidad de adoptar una nueva cinemática en las líneas de pulido industrial de baldosas de gres porcelánico. Se propone una propuesta alternativa de la oscilación transversal de los cabezales pulidores, en el que no hay cambios radicales en las instalaciones de las industrias son necesarias. La idea básica consiste en sustituir el movimiento totalmente del seno de los cabezales pulidores por un movimiento ondulatorio trapezoide. En teoría, esto podría lograrse sólo mediante la adopción de los habituales retrasos en el movimiento de oscilación transversal. las consecuencias de esta cinemática fueron analizados cuantitativamente, teniendo en cuenta la homogeneidad espacial de pulido. Tal homogeneidad fora representada por el coeficiente de variación de la distribución de lo tiempo de pulido en la superficie, determinada por medio de simulaciones computacionales, teniendo también en cuenta el efecto de pulido de las cabezas múltiples.

  6. The View of Lithuanian Statehood Held by the Polish Underground during 1939-1944

    OpenAIRE

    Bubnys, Arūnas

    2006-01-01

    The article investigates the attitudes of Polish underground actors towards the statehood of Lithuania, its territorial integrity, and Lithuanian-Polish relations during the World War II. The author draws the conclusion that Polish underground political structures expressed a hostile and prejudiced attitude towards Lithuania. All the blame and responsibility for bad mutual relations is put on Lithuania and Lithuanians. Polish underground actors living in Vilnija were extremely hostile towards...

  7. Semi-strong informational efficiency in the Polish foreign exchange market

    OpenAIRE

    Luksz Goczek

    2015-01-01

    During the financial crisis a notion that the Polish exchange rate is not determined effectively was very dominant, because of a contagion effect of the global financial crisis on the Polish economy. In addition, many foreign exchange market analysts explained developments in the Polish exchange market trough a hypothesis that the Polish zloty exchange rate follows other exchange rates. This contradicts market efficiency as this would lead to profitable arbitrage possibility based on past inf...

  8. SENIOR STAFF ADVANCEMENT COMMITTEE (SSAC)

    CERN Document Server

    2000-01-01

    Composition and mandateThe Senior Staff Advancement Committee is composed of members nominated ad persona by the Director-General.The Committee examines proposals from Divisions concerning promotions to grade 13 in Career Path IX, changes of career path to Career Path IX and advancements to the exceptional grade in Career path VIII.The Director-General may consult the Committee on any matter related to senior staff careers.The Committee makes its recommendations to the Director-General.

  9. Plasma Science Committee (PLSC)

    International Nuclear Information System (INIS)

    1990-01-01

    The Plasma Science Committee (PLSC) is a standing committee under the auspices of the Board on Physics and Astronomy, Commission on Physical Sciences, Mathematics, and Applications of the National Academy of Sciences--National Research Council. Plasma sciences represent a broad and diverse field. The PLSC has accepted the responsibility of monitoring the continuing development and assessing the general health of the field as whole. Although select advisory bodies have been created to address specific issues that affect plasma science, such as the Fusion Policy Advisory Committee (FPAC), the PLSC provides a focus for the plasma science community that is unique and essential. The membership of the PLSC is drawn from research laboratories in universities, industry, and government. Areas of expertise on the committee include accelerators and beams, space physics, astrophysics, computational physics and applied mathematics, fusion plasmas, fundamental experiments and theory, radiation sources, low temperature plasmas, and plasma-surface interactions. The PLSC is well prepared to respond to requests for studies on specific issues. This report discusses ion of the PLSC work

  10. Federalism and health policy: the intergovernmental committees in Brazil

    Directory of Open Access Journals (Sweden)

    Cristiani Vieira Machado

    2014-08-01

    Full Text Available OBJECTIVE To analyze the dynamics of operation of the Bipartite Committees in health care in the Brazilian states. METHODS The research included visits to 24 states, direct observation, document analysis, and performance of semi-structured interviews with state and local leaders. The characterization of each committee was performed between 2007 and 2010, and four dimensions were considered: (i level of institutionality, classified as advanced, intermediate, or incipient; (ii agenda of intergovernmental negotiations, classified as diversified/restricted, adapted/not adapted to the reality of each state, and shared/unshared between the state and municipalities; (iii political processes, considering the character and scope of intergovernmental relations; and (iv capacity of operation, assessed as high, moderate, or low. RESULTS Ten committees had advanced level of institutionality. The agenda of the negotiations was diversified in all states, and most of them were adapted to the state reality. However, one-third of the committees showed power inequalities between the government levels. Cooperative and interactive intergovernmental relations predominated in 54.0% of the states. The level of institutionality, scope of negotiations, and political processes influenced Bipartite Committees’ ability to formulate policies and coordinate health care at the federal level. Bipartite Committees with a high capacity of operation predominated in the South and Southeast regions, while those with a low capacity of operations predominated in the North and Northeast. CONCLUSIONS The regional differences in operation among Bipartite Interagency Committees suggest the influence of historical-structural variables (socioeconomic development, geographic barriers, characteristics of the health care system in their capacity of intergovernmental health care management. However, structural problems can be overcome in some states through institutional and political changes

  11. Uso de la vacuna contra el carbunco en los Estados Unidos de América Use of anthrax vaccine in the United States of America: recommendations of the Advisory Committee on Immunization Practices

    Directory of Open Access Journals (Sweden)

    2001-07-01

    Full Text Available This piece presents the recommendations of the Advisory Committee on Immunization Practices of the United States of America concerning the use of aluminum hydroxide adsorbed cell-free anthrax vaccine (Anthrax Vaccine Adsorbed, or AVA and the use of chemoprophylaxis against Bacillus anthracis in the United States. The recommended vaccination schedule consists of three subcutaneous injections, at 0, 2, and 4 weeks, and three booster vaccinations, at 6, 12, and 18 months. To maintain immunity, an annual booster injection is recommended. Approximately 95% of vaccinees seroconvert, with a fourfold rise in anti-PA (protective antigen IgG titers after three doses. Analysis of data from the United States' Vaccine Adverse Event Reporting System has documented no pattern of serious adverse events clearly associated with the vaccine, except injection-site reactions. Vaccination is contraindicated in the case of a previous history of anthrax infection or anaphylactic reaction following a previous dose of AVA or any of the vaccine components. In addition, vaccination should be postponed in the case of moderate or severe acute illness. Pregnant women should be vaccinated against anthrax only if the potential benefits of vaccination outweigh the potential risks to the fetus. Vaccination during breast-feeding is not medically contraindicated. Routine preexposure vaccination with AVA is indicated for persons engaged in: a work involving production quantities or concentrations of B. anthracis cultures or b activities with a high potential for aerosol production. For the military and other select populations or for groups for which a calculable risk can be assessed, preexposure vaccination may be indicated. Following confirmed or suspected exposure to B. anthracis, postexposure antibiotic prophylaxis should be administered with ciprofloxacin, ofloxacin, doxycycline, penicillin VK, or amoxicillin. If the vaccine is available, prophylaxis should continue for 4 weeks

  12. Second meeting of the ITER Preparatory Committee

    International Nuclear Information System (INIS)

    Drew, M.

    2003-01-01

    The committee charged to oversee the ITER ITA (ITER transitional arrangements) the ITER preparatory committee, held its second meeting on 24 September at the JET facilities at Culham, UK. Dr. Umberto Finzi of the European Commission was chairman. This meeting was also the first since the succession by Dr. Yasuo Shimomura to Dr. Robert Aymar as Interim Project Leader (IPL). Welcoming Dr. Shimomura in his new capacity, the Committee paid tribute to the outstanding contributions of his predecessor to the definition, design and promotion of ITER, and expressed the gratitude of all Participants to Dr. Aymar and its best wishes for future success in his new appointment.The technical activities of the ITA were the main focus of the Committee's discussions. The Committee took note of the IPL's Status Report on ITA Technical Activities and endorsed the IPL's proposals for the top level structure of the International Team, including the designation of Dr. Pietro Barabaschi as Deputy to the IPL. The Committee took note of the IPL's proposals on Participants' contributions to the ITA and of the Participants' stated intentions and expectations in this regard. Several Delegations pointed out that access to necessary resources would depend strongly on progress made towards the Agreement. All Participants were invited, in the shared interests of the project, to respond constructively to the specific technical areas where the IPL reported a lack of resources. Following a presentation from the IT on Project Management Tools, the Committee expressed support, in general, for the proposed strategy designed to provide the current team with the CAD and Data Management elements necessary to prepare for an efficient start of ITER construction, and asked the IT Leader to report on an estimate and time profile of expenditure during the period to mid-2004. The Committee supported the proposals to re-establish the ITER Test Blanket Working. The Committee agreed that the phasing of planned

  13. Terminologia anatomica in the past and the future from perspective of 110th anniversary of Polish Anatomical Terminology.

    Science.gov (United States)

    Gielecki, J; Zurada, A; Osman, N

    2008-05-01

    Professional terminology is commonplace, particularly in the fields of mathematics, medicine, veterinary and natural sciences. The use of the terminology can be international, as it is with Anatomical Terminology (AT). In the early age of modern education, anatomists adopted Latin as the international language for AT. However, at the end of the 20th century, the English language became more predominant around the world. It can be said that the AT is a specific collection of scientific terms. One of the major flaws in early AT was that body structures were described by varying names, while some of the terms was irrational in nature, and confusing. At this time, different international committees were working on preparing a unified final version of the AT, which in the end consisted of 5,640 terms (4,286 originally from the Basle Nomina Anatomica, BNA). Also, each country wanted to have its own nomenclature. In order to accomplish this, each country based their nomenclature on the international AT, and then translated it into their own language. The history of the Polish Anatomical Terminology (PAT) is unique, and follows the events of history. It was first published in 1898, at a time when its neighbours partitioned the territory of Poland. During 150 years, the Polish culture and language was under the Russification and Germanization policy. It is important to note, that even with such difficult circumstances, the PAT was the first national AT in the world. The PAT was a union of the accepted first BNA in Latin and the original Polish anatomical equivalents. This union formed the basis for theoretical and clinical medicine in Poland.

  14. Effect of Polishing Systems on Surface Roughness and Topography of Monolithic Zirconia.

    Science.gov (United States)

    Goo, C L; Yap, Auj; Tan, Kbc; Fawzy, A S

    2016-01-01

    This study evaluated the effect of different chairside polishing systems on the surface roughness and topography of monolithic zirconia. Thirty-five monolithic zirconia specimens (Lava PLUS, 3M ESPE) were fabricated and divided into five groups of seven and polished with the following: Group 1 (WZ)-Dura white stone followed by Shofu zirconia polishing kit; Group 2 (SZ)-Shofu zirconia polishing kit; Group 3 (CE)-Ceramiste porcelain polishers; Group 4 (CM)-Ceramaster porcelain polishers; and Group 5 (KZ)-Komet ZR zirconia polishers. All specimens were ground with a fine-grit diamond bur prior to polishing procedures to simulate clinical finishing. Baseline and post-polishing profilometric readings were recorded and delta Ra values (difference in mean surface roughness before and after polishing) were computed and analyzed using one-way analysis of variance and Scheffe post hoc test (pSEM) images of the ground but unpolished and polished specimens were acquired. Delta Ra values ranged from 0.146 for CE to 0.400 for KZ. Delta Ra values for KZ, WZ, and SZ were significantly greater than for CE. Significant differences in delta Ra values were also observed between KZ and CM. The SEM images obtained were consistent with the profilometric findings. Diamond-impregnated polishing systems were more effective than silica carbide-impregnated ones in reducing the surface roughness of ground monolithic zirconia.

  15. Rebuilding a Research Ethics Committee

    Science.gov (United States)

    Biggs, John S. G.; Marchesi, August

    2013-01-01

    The principal ethics committee in Australia's Capital, Canberra, underwent a major revision in the last three years based on changes debated in the literature. Committee or Board structure varies widely; regulations determining minimum size and membership differ between countries. Issues such as the effectiveness of committee management,…

  16. Study on combined polishing process of aspherical aluminum mirrors

    Science.gov (United States)

    Deng, Jinqiu; Peng, Xiaoqiang; Hu, Hao; Ge, Kunpeng

    2017-10-01

    The aluminum mirrors are widely used as important optical components in some vital fields such as astronomical instruments or military installations due to the unique advantages of aluminum alloy. In order to simplify the structure of optical system and improve the performance at the same time, it's a tendency that the optics will be designed to aspherical or other freeform shapes. However, the traditional techniques are falling to have adequate abilities to deal with the increasing demands of aluminum optics. For example, the tool marks leaved on the surface from single point diamond turning (SPDT) has obvious adverse effects to optical system. The deterministic and sub-aperture polishing process has showed the potential to fabricate complex shapes over the few years. But it's still recognized as a problem to polish bare aluminum directly because of its soft surface and active chemical characteristics. Therefore, a combination of magnetorheological finishing (MRF) and small tool polishing (STP) is applied to obtain high performance aluminum optics in this paper. A paraboloid aluminum mirror was polished with this proposed method, and the results showed that the surface texture of the sample is restrained from rms 0.409λ (λ=632.8nm) to rms 0.025λ, and the surface roughness is improved from average Ra 6 7nm to Ra 3 4nm.

  17. Using Nail Polish to Teach about Gender and Homophobia

    Science.gov (United States)

    Edwards, Nelta M.

    2010-01-01

    How might teachers help students investigate the relationship between gender and homophobia? This article describes an exercise that uses fingernail polish to do just that. The authors uses anecdotal evidence to describe the exercise in which students pair with someone of the opposite gender and paint each other's fingernails. Additionally, the…

  18. In-situ photopatterning of hydrogel microarrays in polished microchips

    NARCIS (Netherlands)

    Gümüscü, B.; van den Berg, Albert; Eijkel, Jan C.T.

    2015-01-01

    We present a fabrication method which enables simple and eproducible photopatterning of micron- sized hydrogel arrays inside closed microchips. To achieve this, the glass cover of the microchip is thinned by mechanical grinding and polishing. This procedure reduces the spacing between the photomask

  19. Bioethanol productions from rice polish by optimization of dilute acid ...

    African Journals Online (AJOL)

    Lignocellulose materials are abundant renewable resource for the production of biofuel from fermentative organism (Sacchromyces cervesiae). Rice polish is cheapest and abundant lignocelluloses resource and has potential to produce bioethanol. The main steps for the conversion of biomass into glucose required dilute ...

  20. An operational map of the Polish Coastal Front 1970

    DEFF Research Database (Denmark)

    Nielsen, Thomas Theis; Svenningsen, Stig Roar; Tinning, Morten

    2016-01-01

    The map of the Operational Plan for the Coastal Front, from Poland 1970 forms the basis for this paper. The map portraits the blueprint of the combined operational war plans for the Polish military in the late 1960’s and 70’s. It details the offensive against NATO countries and their forces...

  1. Social Interest in The Polish Doctrine of Monument Preservation

    Science.gov (United States)

    Antoszczyszyn, Marek

    2017-10-01

    The paper discusses a controversy surrounding the latest amendment to the text of the Polish Parliament Act Conservation and the Care of Monuments (2015). It is a common dictum that any edifice cannot exist without good foundations. In this particular case of the mentioned above Act, definition of monument appears to be such a basis. A social interest is one of the constituent elements of the definition mentioned above. In the first part of the paper the notion of the social interest expression has been discussed, particularly from national and international points of view. The second part of the paper comprises some examples from the Polish monument preservation experience with the use of comparison method supported by case study. Only three big Polish cities: Warsaw, Wroclaw and Szczecin are involved in the presented case study but it must be emphasized that many other places on Polish territory experienced the same. Basing on the faith of these cities, the results and discussion chapter proves fundamental discrepancy in social interest notion between national and international scopes using some analytical methods. Finally, in the discussion chapter some proposals for the future amendment of monument definition in the Act of Conservation and the Care of Monuments have been provided.

  2. Detection of Polish clinical Aspergillus fumigatus isolates resistant to triazoles

    DEFF Research Database (Denmark)

    Nawrot, Urszula; Kurzyk, Ewelina; Arendrup, Maiken Cavling

    2018-01-01

    We studied the presence of triazole resistance of 121 Aspergillus fumigatus clinical isolates collected in two Polish cities, Warsaw and Wrocław, to determine if resistance is emerging in our country. We identified five itraconazole resistant isolates (4.13%) carrying the TR34/L98H alteration...

  3. Values Education--A Reality or Myth in Polish Schools

    Science.gov (United States)

    Switala, Eugeniusz

    2015-01-01

    The United Nations Decade of Education for Sustainable Development (DESD), which is coming to an end, will offer all kinds of summaries and reflections on this issue. The aim of this paper, strictly related with the goals of the DESD, is to answer the following questions: (1) "Is the Polish school ready to provide values education?"; (2)…

  4. Violation of interest-rate parity: a Polish example

    Science.gov (United States)

    Przystawa, Jerzy; Wolf, Marek

    2000-09-01

    The mechanism of the so-called “Bagsik Oscillator” is presented and discussed. In essence, it is a repeated exploitation of arbitrage opportunities that resulted from a marked departure from the interest-rate parity relationship between the local Polish currency and the western currencies.

  5. Novel ceria-polymer microcomposites for chemical mechanical polishing

    International Nuclear Information System (INIS)

    Coutinho, Cecil A.; Mudhivarthi, Subrahmanya R.; Kumar, Ashok; Gupta, Vinay K.

    2008-01-01

    Abrasive particles are key components in slurries for chemical mechanical polishing (CMP). Since the particle characteristics determine surface quality of wafers during polishing, in this research, novel abrasive composite particles have been developed. These composite particles contain nanoparticles of ceria dispersed within cross-linked, polymeric microspheres such that the average mass fraction of ceria is approximately 50% in the particles. The microspheres are formed by co-polymerization of N-isopropylacrylamide (NIPAM) with 3-(trimethoxysilyl)propyl methacrylate (MPS) and contain interpenetrating (IP) chains of poly(acrylic acid) (PAAc). Infrared spectroscopy, dynamic light scattering, and transmission electron microscopy are employed to characterize the composite particles. Planarization of silicon dioxide wafers is studied on a bench-top CMP tester and the polished surfaces are characterized by ellipsometry, atomic force and optical microscopy. Slurries formed from the composite ceria-polymer particles lead to lower topographical variations and surface roughness than slurries of only ceria nanoparticles even though both slurries achieve similar removal rates of ∼100 nm/min for similar ceria content. Polishing with the novel composite particles gives surfaces devoid of scratches and particle deposition, which makes these particles suitable for the next generation slurries in CMP

  6. Novel ceria-polymer microcomposites for chemical mechanical polishing

    Energy Technology Data Exchange (ETDEWEB)

    Coutinho, Cecil A. [Department of Chemical and Biomedical Engineering, University of South Florida (United States); Mudhivarthi, Subrahmanya R.; Kumar, Ashok [Nanomaterials and Nanomanufacturing Research Center, University of South Florida (United States); Department of Mechanical Engineering, University of South Florida (United States); Gupta, Vinay K. [Department of Chemical and Biomedical Engineering, University of South Florida (United States)], E-mail: vkgupta@eng.usf.edu

    2008-12-30

    Abrasive particles are key components in slurries for chemical mechanical polishing (CMP). Since the particle characteristics determine surface quality of wafers during polishing, in this research, novel abrasive composite particles have been developed. These composite particles contain nanoparticles of ceria dispersed within cross-linked, polymeric microspheres such that the average mass fraction of ceria is approximately 50% in the particles. The microspheres are formed by co-polymerization of N-isopropylacrylamide (NIPAM) with 3-(trimethoxysilyl)propyl methacrylate (MPS) and contain interpenetrating (IP) chains of poly(acrylic acid) (PAAc). Infrared spectroscopy, dynamic light scattering, and transmission electron microscopy are employed to characterize the composite particles. Planarization of silicon dioxide wafers is studied on a bench-top CMP tester and the polished surfaces are characterized by ellipsometry, atomic force and optical microscopy. Slurries formed from the composite ceria-polymer particles lead to lower topographical variations and surface roughness than slurries of only ceria nanoparticles even though both slurries achieve similar removal rates of {approx}100 nm/min for similar ceria content. Polishing with the novel composite particles gives surfaces devoid of scratches and particle deposition, which makes these particles suitable for the next generation slurries in CMP.

  7. Empirical relations of sediment transport prediction in Polish multibanks shore

    International Nuclear Information System (INIS)

    Pruszak, Z.

    1995-01-01

    Qualitative and quantitative description of various elements of bottom sediment movement in Polish multibanks coastal region has been down. Empirical relations linking transport velocity, thickness of the drag layer and the transport volume with the generating wave-current background have been presented. Practical engineering advices on performance of various reports concerning coastal engineering or coastal zone ecology. (author)

  8. Diamond turning and polishing tests on new RSP aluminium alloys

    NARCIS (Netherlands)

    Horst, R. ter; Haan, M. de; Gubbels, G.P.H.; Senden, R.; Venrooy, B.W.H. van; Hoogstrate, A.M.

    2012-01-01

    For years now conventional aluminium 6061 T6 has widely been used for mirrors in astronomical instruments, being diamond turned or since a few years also being optically polished. This allows the development of optical systems that can be tested and operated at any temperature, without being

  9. The Profile of a Polish Mutual Fund Manager

    Directory of Open Access Journals (Sweden)

    Dariusz Filip

    2018-05-01

    Full Text Available Aim/purpose - The purpose of this paper is to identify the characteristics that are typical of mutual fund managers. Design/methodology/approach - The study concentrates on a set of socio-demographic data, such as: age, gender, education, experience, and professional qualifications of 336 portfolio managers. The applied research strategy relies on an analysis concerning a set of statistical metrics describing the population under examination. Findings - The average Polish fund manager is a 37-year-old man, a holder of a stock-broker or investment adviser license. He obtained the authorization from the Polish Financial Supervision Authority (KNF a few years after graduating from the Warsaw School of Economics (SGH. He has 11 years' experience in financial markets and 7 years' experience in the mutual fund industry. Research implications/limitations - The identification of managerial characteristics for the purpose of creating a profile of a Polish mutual fund manager will provide an important basis for further surveys and analyses aimed to evaluate the effectiveness of mutual funds. Originality/value/contribution - There are no investigations within the discussed area in Polish studies. Therefore, the identification of the characteristics that are typical of mutual fund managers will make a contribution to the finance literature.(original abstract

  10. Polish scientists in fish immunology: a short history : review

    NARCIS (Netherlands)

    Muiswinkel, van W.B.; Pilarczyk, A.

    2015-01-01

    This review describes the role played by Polish scientists in the field of fish immunology and vaccination starting around 1900. In the early days, most publications were dealing with a description of relevant cells and organs in fish. Functional studies (phagocytosis, antibody response) came later

  11. Clear and compelling evidence: the Polish tribunal on abortion rights.

    Science.gov (United States)

    Girard, Françoise; Nowicka, Wanda

    2002-05-01

    On 25 July 2001 the Polish Federation for Women and Family Planning organised a Tribunal on Abortion Rights in Warsaw, to publicize the negative consequences of the criminalization of abortion in Poland. A panel of Polish and foreign experts heard the testimonials of seven Polish women's experiences under the 1993 "Anti-Abortion Act". Only two of the seven women were able to tell their stories in person. One died in 2001, at the age of 21, of an unsafe abortion. One is legally blind after having carried her last pregnancy to term. One is in prison for infanticide, which in all likelihood was committed by her boyfriend. National and foreign journalists were in attendance, as well as observers from all walks of life--writers, students, mothers, activists, feminists, husbands. The evidence was clear and compelling. Restrictive abortion laws make abortion unsafe by pushing it underground, endanger women's health, create a climate where even those services that are allowed by law-become unavailable, and contravene standards set by international human rights law. The restrictive abortion law in Poland has not increased the number of births; it has only caused women and their families suffering. The Tribunal brought the issue of abortion into the media prior to an election campaign and galvanised Polish and other Eastern European women's groups to become more active in defence of abortion rights.

  12. Heavy Metal Contamination of Popular Nail Polishes in Iran

    Directory of Open Access Journals (Sweden)

    Golnaz Karimi

    2015-06-01

    Full Text Available Background: Toxic and hazardous heavy metals like arsenic, lead, mercury, zinc, chromium and iron are found in a variety of personal care products, e.g. lipstick, whitening toothpaste, eyeliner and nail color. The nails absorb the pigments of nail polishes and vaporized or soluble metals can easily pass it. The goal of this survey was to assess whether the different colors of nail polishes comply with maximum concentrations of heavy metals in the EPA’s guidelines. Methods: 150 samples of different popular brands of nail polishes in 13 colors (yellow, beige, silver, pink, white, violet, brown, golden, green, black, colorless, red and blue were randomly purchased from beauty shops in Tehran City, Iran, in 2014. Microwave digestion EPA method 3051 was used by a microwave oven to determine the amount of 5 heavy metals; Nickel, Chromium, Lead, Arsenic and Cadmium. One-way ANOVA, Two-way ANOVA, hierarchical cluster, and principal component analyses were applied by Statistica 7.0 software. Results: The concentrations of chrome, lead, nickel and arsenic showed significant differences between the colors (p<0.05. In all studied samples, the level of cadmium was beyond the safe maximum permissible limit (MPS, but no significance difference in the cadmium content was identified. Conclusion: Due to the high concentrations of toxic metals in many brands of nail polishes, meticulous quality control is recommended for these beauty products.

  13. Polish adaptation of scoliosis research society-22 questionnaire.

    Science.gov (United States)

    Glowacki, Maciej; Misterska, Ewa; Laurentowska, Maria; Mankowski, Przemyslaw

    2009-05-01

    Polish adaptation of the original version of Scoliosis Research Society (SRS) instrument. The transcultural adaptation of SRS-22 and evaluation of its internal consistency. High psychometric value of the SRS-22 Questionnaire has made it an effective evaluation instrument in clinically assessing the functional status of patients with adolescent idiopathic scoliosis. First, 2 translators translated the original version into Polish. Afterwards, the translators identified differences between the translations and produced a consensus version. In the third stage, 2 native English speakers produced back translations. Finally, a team of 2 orthopedic surgeons, translators, a statistician and a psychologist reviewed all the translations to produce a prefinal version. The questionnaire was administered to 60 girls at the age of 16.6, SD 2.0 with adolescent idiopathic scoliosis treated with the Cotrel-Dubousset method in Pediatric Orthopaedics and Traumatology Clinic in Poznań. The internal consistency in the Polish version equaled 0.89 for the overall result and 0.81 for function, 0.81 for pain, 0.80 for mental health, 0.77 for self-image, and 0.69 for treatment satisfaction domains, respectively. The Polish version of SRS-22 is characterized by high internal consistency for all domains and for the overall score, which makes it an evaluation tool after surgical treatment compatible with the original SRS-22.

  14. Summary of Synthetic Lap Polishing Experiments at LLNL, FY95

    International Nuclear Information System (INIS)

    Nichols, M A

    2001-01-01

    The purpose of this research was to support the optics finishing development work for the NIF, the National Ignition Facility. One of the major expenses for the construction of NIF is the cost of finishing of the large aperture optics. One way to significantly reduce the cost of the project is to develop processes to reduce the amount of time necessary to polish the more than 3,000 amplifier slabs. These slabs are rectangular with an aspect ratio of more than twenty to one and are made of a very temperature sensitive glass, Nd doped phosphate laser glass. As a result of this effort, we could potentially reduce the time necessary to polish each surface of an amplifier from 20-30 hours of run time to under an hour to achieve the same removal and still maintain a flatness of between one to three waves concave figure. We also feel confident that we can polish rectangular thermally sensitive glass flat by use of temperature control of the polishing platen, pad curvature, slurry concentration with temperature control, pad rotation, and pressure; although further, larger scale experiments are necessary to gain sufficient confidence that such a procedure could be successfully fielded

  15. Scope of Nursing Care in Polish Intensive Care Units

    Directory of Open Access Journals (Sweden)

    Mariusz Wysokiński

    2013-01-01

    Full Text Available Introduction. The TISS-28 scale, which may be used for nursing staff scheduling in ICU, does not reflect the complete scope of nursing resulting from varied cultural and organizational conditions of individual systems of health care. Aim. The objective of the study was an attempt to provide an answer to the question what scope of nursing care provided by Polish nurses in ICU does the TISS-28 scale reflect? Material and Methods. The methods of working time measurement were used in the study. For the needs of the study, 252 hours of continuous observation (day-long observation and 3.697 time-schedule measurements were carried out. Results. The total nursing time was 4125.79 min. (68.76 hours, that is, 60.15% of the total working time of Polish nurses during the period analyzed. Based on the median test, the difference was observed on the level of χ2=16945.8, P<0.001 between the nurses’ workload resulting from performance of activities qualified into the TISS-28 scale and load resulting from performance of interventions within the scopes of care not considered in this scale in Polish ICUs. Conclusions. The original version of the TISS-28 scale does not fully reflect the workload among Polish nurses employed in ICUs.

  16. Application of Super Absorbent Polymers (SAP) in Concrete Construction State-of-the-Art Report Prepared by Technical Committee 225-SAP

    CERN Document Server

    Reinhardt, Hans-Wolf

    2012-01-01

    This is the state-of-the-art report prepared by the RILEM TC “Application of Super Absorbent Polymers (SAP) in concrete construction”. It gives a comprehensive overview of the properties of SAP, specific water absorption and desorption behaviour of SAP in fresh and hardening concrete, effects of the SAP addition on rheological properties of fresh concrete, changes of cement paste microstructure and mechanical properties of concrete. Furthermore, the key advantages of using SAP are described in detail: the ability of this material to act as an internal curing agent to mitigate autogenous shrinkage of high-performance concrete, the possibility to use SAP as an alternative to air-entrainment agents in order to increase the frost resistance of concrete, and finally, the benefit of steering the rheology of fresh cement-based materials. The final chapter describes the first existing and numerous prospective applications for this new concrete additive.

  17. 78 FR 70392 - Notice of Meeting of Advisory Committee on International Law

    Science.gov (United States)

    2013-11-25

    ... Law A meeting of the Department of State's Advisory Committee on International Law will take place on... Law School (Frederick Lawrence Student Conference Center), 2000 H Street NW., Washington, DC. Acting... Director, Advisory Committee on International Law, United States Department of State. [FR Doc. 2013-28232...

  18. Great Britain and German-Polish Relations, 1929–1931

    Directory of Open Access Journals (Sweden)

    Zotova Ekaterina

    2014-12-01

    Full Text Available The article deals with the study of British-German relations during the period of exacerbation of territorial disputes between Germany and Poland in 1929-1931. Germany was making plans for revising the eastern borders. It sought to enlist the support of the new Labour government. Britain didn’t only approve of Germany's intention to carry out revision of the Treaty of Versailles (reparation issue, the evacuation of the Rhineland and the change in the German-Polish border, but also supported the strengthening of the political and economic situation in Germany as a whole. Assistance to Germany was advantageous for Britain. Firstly, the British support helped to improve the capacity of the purchasing power of the German market as one of the traditional markets of the English sale. Secondly, the strengthening of the position of the German cabinet meant failure of the French policy in Europe at this stage. The defeat of France in a dispute on the issue of early evacuation of the Rhineland would seriously devalue the foreign policy initiatives of Paris. Thirdly, the British government hoped that Germany will go into orbit of British political influence. The identity of the positions of the German and the British cabinets were considered as the components of British policy success not only in relations with France and Italy, but also with Czechoslovakia and Poland. Since the formation of the MacDonald’s cabinet, anti-Polish moods increased in the British course for the settlement of German-Polish relations. However, the threat of an attack on Poland by Germany was regarded by the government of Britain as unacceptable way of resolving the German-Polish conflict. Britain tried to follow the traditional foreign policy concept of “balance of power”, but the inefficiency of British policy “mediation” in European affairs was clearly shown in times of growing financial and economic crisis. The issue of the German-Polish border remained unsolved.

  19. Szanse i ograniczenia stosowania strategii CSR w polskich przedsiêbiorstwach/The Chances and the Limitation of Applying the CSR Strategy in Polish Enterprises

    OpenAIRE

    Iwona Codogni

    2012-01-01

    The topic of the article is the perspectives of CSR in Polish companies. The article contains the definition of corporate social responsibility, the state and dynamics of ethical reporting and the factors that can influence the dynamics of CSR in Poland – both in a favourable and adverse way.

  20. Analysis of Polish internet retail sites offering electronic cigarettes.

    Science.gov (United States)

    Zarobkiewicz, Michał Konrad; Woźniakowski, Mateusz Mariusz; Sławiński, Mirosław Aleksander; Samborski, Patryk Michał; Wawryk-Gawda, Ewelina; Jodłowska-Jędrych, Barbara

    Electronic cigarettes as possibly healthier alternative to conventional cigarettes are gaining popularity worldwide, although they are still hazardous to human health. Partly it is caused by unregulated advertising and online sales. Unfortunately it is more and more popular for youth to try electronic cigarettes. The aim of the study was to assess the marketing claims used by Polish websites offering electronic cigarettes. A search using Google search engine was performed in July 2015 for two keywords: e-papierosy [e-cigarettes] and elektroniczne papierosy [electronic cigarettes]. First 150 websites (15 pages) were listed. After initial review 86 pages met all inclusion criteria and were included in the study. Pages were searched for presence of 13 selected marketing claims as well as age-related warning and any social websites connections. Age-related warning was present on only 33.72% (n=29) websites. Two thirds has its own Facebook fan-page with average 1922.09 ± 3634.86 likes. Articles about health are available on 10.46% (n=9) websites, 53.49% (n=46) states that e-cigarettes are healthier than conventional ones, 39.53% (n=34) emphasized that during usage of e-cigarettes no tarry substances are produced. Two pages had special article in which conventional and electronic cigarettes were compared. Almost half (44.19%) remarked that e-cigarettes are cheaper in usage than conventional, one third pointed out the simplicity of usage. 32.56% advertised e-cigarettes as aid in quitting smoking. One fourth stated that e-cigarettes are harmless for surroundings. 33.72% marketed them as a way of bypassing public smoking act. 56.98% remarked the variety of liquid tastes offered. Electronic cigarettes and their rising popularity create another new possible threat for public health as the widely available information emphasize safety of e-cigarettes usage and as their availability and usage is not limited or restricted by law. electronic cigarettes, e-cigarettes, internet

  1. Decision Making in Liver Transplant Selection Committees

    Science.gov (United States)

    Volk, Michael L; Biggins, Scott W; Huang, Mary Ann; Argo, Curtis K; Fontana, Robert J; Anspach, Renee R

    2011-01-01

    Background In order to receive a liver transplant, patients must first be placed on the waiting list – a decision made in most transplant centers by a multidisciplinary committee. The function of these committees has never been studied. Objectives To describe decision making in liver transplant committees and identify opportunities for process improvement. Design Observational multi-center Setting We observed 63 meetings and interviewed 50 committee members at 4 liver transplant centers. Study Subjects Transplant committee members. Measurements Recorded transcripts and field notes were analyzed using standard qualitative sociological methods. Results While the structure of meetings varied by center, the process was uniform and involved reviewing possible reasons for patient exclusion using primarily inductive reasoning. Stated justifications for excluding patients were a) too well, b) non-hepatic comorbidities or advanced age, c) too sick in the setting of advanced liver disease, d) substance abuse, or e) other psychosocial barriers. Dominant themes identified included members’ angst over deciding who lives and dies, a high correlation between psychosocial barriers to transplant and patients’ socioeconomic status, and the influence of external forces on decision making. Consistently identified barriers to effective group decision making were: 1) unwritten center policies, and 2) confusion regarding advocacy versus stewardship roles. Limitations The use of qualitative methods provides broad understanding but limits specific inferences. These four centers may not be reflective of every transplant center nationwide. Conclusion The difficult decisions made by these committees are reasonably consistent and always well-intentioned, but might be improved by more explicit written policies and clarifying roles. This process may help inform resource allocation in other areas of medicine. Primary funding source The Greenwall Foundation. PMID:22007044

  2. Symmetry or asymmetry? Cross-border openness of service providers in Polish-Czech and Polish-German border towns

    Directory of Open Access Journals (Sweden)

    Dołzbłasz Sylwia

    2015-03-01

    Full Text Available The symmetry and/or asymmetry in terms of cross-border openness of service providers is examined in this article, for the cases of two border twin towns: Cieszyn/Český Těšín at the Polish-Czech border, and Gubin/Guben at the Polish-German border. To assess the level of openness of firms towards clients from the other side of the border, four trans-border categories were examined: neighbour’s language visible at store location; business offers in the language of the neighbour; the possibilities of payment in the neighbour’s currency; and the staff’s knowledge of the language. This enabled a comparison of both parts of the particular twin towns in relation to the character of cross-border openness, as well as an assessment of their symmetry/asymmetry. Comparisons of Gubin/Guben and Cieszyn/Český Těšín with respect to the analysed features were also carried out. The analysis shows significant variation in the level of cross-border openness towards clients from neighbouring countries. Whereas in the Polish-Czech town a relative symmetry was observed, in the Polish-German case, significant asymmetry was noted.

  3. Pseudo-random tool paths for CNC sub-aperture polishing and other applications.

    Science.gov (United States)

    Dunn, Christina R; Walker, David D

    2008-11-10

    In this paper we first contrast classical and CNC polishing techniques in regard to the repetitiveness of the machine motions. We then present a pseudo-random tool path for use with CNC sub-aperture polishing techniques and report polishing results from equivalent random and raster tool-paths. The random tool-path used - the unicursal random tool-path - employs a random seed to generate a pattern which never crosses itself. Because of this property, this tool-path is directly compatible with dwell time maps for corrective polishing. The tool-path can be used to polish any continuous area of any boundary shape, including surfaces with interior perforations.

  4. Abstracts Book of 41. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry

    International Nuclear Information System (INIS)

    1998-01-01

    Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry is the most important scientific forum of Polish Chemists. The state of the art in many basic, fundamental and applied investigations has been presented and discussed. The following scientific sessions and microsymposia have been proposed: theoretical chemistry; molecular interactions; metal compounds - chemical, physical, electronic and biological aspects; catalysis and surface physico-chemistry; polymers - radiochemistry, modifications, physics and analytical methods; organic and bioorganic chemistry; physico-chemistry of condensed matter; chemical metallurgy; environmental protection; inorganic technology; chemistry and technology of coal; radiation chemistry; analytical chemistry; chemical engineering; young scientists forum; chemical didactics; petrochemistry; energetic materials; membranes and membrane processes; medical chemistry

  5. Polish society attitudes towards nuclear power, ionizing radiation applications and radioactive waste management (Report on public opinion polls)

    International Nuclear Information System (INIS)

    Latek, Stanislaw

    1999-01-01

    In Poland, during parliamentary debate on Foundations for the 'Polish energy policies up to 2010', the importance of public attitudes toward nuclear power has been recalled repeatedly in the context of the future development of nuclear power in Poland. In the governmental document, accepted by Polish Parliament on 1 January 1996, it has been stated that nuclear power plant construction is not foreseen up to the year 2010; nevertheless it has been assumed that the appraisals of the economic feasibility and of the public acceptance level for such investments will be conducted. Thus, the need for such assessments of public opinions and attitudes toward nuclear power has been recognized and accepted by the highest legislative power organ in Poland

  6. The diagnosis and management of food allergies. Position paper of the Food Allergy Section the Polish Society of Allergology

    Directory of Open Access Journals (Sweden)

    Zbigniew Bartuzi

    2017-10-01

    Full Text Available The paper concerns the current position of the Polish Society of Allergology Food Allergy Section on the diagnosis and management of food allergies. The aim of this position is to provide evidence-based recommendations on the diagnosis and management of patients with allergic hypersensitivity to foods. This position statement includes a systematic review of studies in three areas, namely, the epidemiology, diagnosis and management of food allergies. While taking into account the specific Polish setting, in this publication we also used the current European Academy of Allergy and Clinical Immunology (EAACI position paper and other current position statements, including those of the United States National Institute of Allergy and Infectious Diseases (NIAID.

  7. 77 FR 32639 - HIT Standards Committee and HIT Policy Committee; Call for Nominations

    Science.gov (United States)

    2012-06-01

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES HIT Standards Committee and HIT Policy Committee; Call for... Health Information Technology Policy Committee (HITPC). Name of Committees: HIT Standards Committee and HIT Policy Committee. General Function of the Committees: The HITSC is charged to provide...

  8. The decline and fall of Esperanto: lessons for standards committees.

    Science.gov (United States)

    Patterson, R; Huff, S M

    1999-01-01

    In 1887, Polish physician Ludovic Zamenhof introduced Esperanto, a simple, easy-to-learn planned language. His goal was to erase communication barriers between ethnic groups by providing them with a politically neutral, culturally free standard language. His ideas received both praise and condemnation from the leaders of his time. Interest in Esperanto peaked in the 1970s but has since faded somewhat. Despite the logical concept and intellectual appeal of a standard language, Esperanto has not evolved into a dominant worldwide language. Instead, English, with all its idiosyncrasies, is closest to an international lingua franca. Like Zamenhof, standards committees in medical informatics have recognized communication chaos and have tried to establish working models, with mixed results. In some cases, previously shunned proprietary systems have become the standard. A proposed standard, no matter how simple, logical, and well designed, may have difficulty displacing an imperfect but functional "real life" system.

  9. Standing Concertation Committee

    CERN Multimedia

    HR Department

    2009-01-01

    Ordinary Meeting on 11 May 2009 The meeting of the Standing Concertation Committee held on 11 May 2009 was entirely dedicated to the preparation of the TREF meeting on 19 & 20 May 2009. The Committee took note, discussed and agreed on some clarifications on a number of documents and presentations that the Management planned to submit and/or present to TREF on the following subjects: • Personnel statistics 2008: J. Purvis presented the Personnel Statistics for 2008 prepared by HR Department. In line with the previous year, key messages were firstly, a general reduction in staff (2544 to 2400, - 6%), secondly, a reduction in administrative services personnel (from 422 to 387, - 8%) and thirdly, a marked increase in the number of Users and Unpaid Associates (from 8369 to 9140, + 9%) • Five-Yearly Review 2010: A series of draft documents were submitted for discussion, comprising an introductory document explaining the statutory basis for the following four document...

  10. Standing Concertation Committee

    CERN Multimedia

    HR Department

    2009-01-01

    The main items discussed at the meetings of the Standing Concertation Committee in the first quarter of 2009 included: Merit Appraisal and Recognition Scheme (MARS) 2009 exercise The committee took note of 2009 MARS ceiling guidelines giving the advancement budget by career path and amounting to approx 1.80% of the basic salary bill. To this will be added 250 steps CERN-wide, financed by savings from implementation of the international indemnity for 2007, 2008 and the first half of 2009. The specific Senior Staff Guidelines, including the proposed number of promotions from Career Path E to F, were also noted. The guidelines with respect to step distribution were also noted: the minima and maxima remain the same as in previous years. Compliance with the guidelines will continue to be monitored closely (more details, including a frequently asked questions section). It was also noted that Financial Awards (awards for extraordinary service and responsibility allowances) may b...

  11. Committees and sponsors

    Science.gov (United States)

    2011-10-01

    International Advisory Committee Richard F CastenYale, USA Luiz Carlos ChamonSão Paulo, Brazil Osvaldo CivitareseLa Plata, Argentina Jozsef CsehATOMKI, Hungary Jerry P DraayerLSU, USA Alfredo Galindo-UribarriORNL & UT, USA James J KolataNotre Dame, USA Jorge López UTEP, USA Joseph B NatowitzTexas A & M, USA Ma Esther Ortiz IF-UNAM Stuart PittelDelaware, USA Andrés SandovalIF-UNAM Adam SzczepaniakIndiana, USA Piet Van IsackerGANIL, France Michael WiescherNotre Dame, USA Organizing Committee Libertad Barrón-Palos (Chair)IF-UNAM Roelof BijkerICN-UNAM Ruben FossionICN-UNAM David LizcanoININ Sponsors Instituto de Ciencias Nucleares, UNAMInstituto de Física, UNAMInstituto Nacional de Investigaciones NuclearesDivisión de Física Nuclear de la SMFCentro Latinoamericano de Física

  12. Polish Martial Law: The Crisis of Communism

    Science.gov (United States)

    2009-12-01

    of securitization was not created to explain the actions of an authoritative state; however, it is a useful tool that helps to clear away some of the...with numerous choices of nurseries and kindergartens. 18. A 3-year paid maternity leave is introduced for bringing up children. 19. Waiting time

  13. Regulatory Review Committee update

    Energy Technology Data Exchange (ETDEWEB)

    Steele, T. [Polishuk, Camman and Steele, London ON (Canada)

    2001-07-01

    The Committee's objectives, current membership and current issues are reviewed. Each current issue, notably the consultation process with the Ministry of Natural Resources, appeal of Ministry actions, orphan wells/security deposits, oilfield fluid disposal and labour code practices review are discussed in some detail. Dissatisfaction with the current appeals process to the Ministry is highlighted, along with a search for an all encompassing solution. The orphan well problem also received considerable attention, with similar demands for a comprehensive solution.

  14. Annex 5. Monitoring committee

    OpenAIRE

    2013-01-01

    Head of monitoring committee: the Research Commission of the govern­ment of French Polynesia. Panel members Representatives of the following organisations: IRD centre in Papeete Oceanologic Center of the Pacific/Ifremer Investment Promotion Authority Environment Division EPIC Vanille Institut Louis-Malardé Gepsun “Natural Substances process engineering” technology platform (cf. Abbreviations) Fisheries Division Economic Affairs Division External Trade Division Development of Industry and the...

  15. Environment Committee report

    International Nuclear Information System (INIS)

    Greenhalgh, Geoffrey.

    1986-01-01

    The findings of the House of Commons Environment Committee (March 1986) on radioactive waste are examined. The report includes 43 recommendations and conclusions, many of which are directed at improving public acceptance of nuclear power, rather than constituting an attack on the nuclear industry. Some of the major topics considered in the report include: waste disposal, waste classification, waste disposal policy, discharges, reprocessing, and public acceptance. (UK)

  16. Strain-free polished channel-cut crystal monochromators: a new approach and results

    Science.gov (United States)

    Kasman, Elina; Montgomery, Jonathan; Huang, XianRong; Lerch, Jason; Assoufid, Lahsen

    2017-08-01

    The use of channel-cut crystal monochromators has been traditionally limited to applications that can tolerate the rough surface quality from wet etching without polishing. We have previously presented and discussed the motivation for producing channel cut crystals with strain-free polished surfaces [1]. Afterwards, we have undertaken an effort to design and implement an automated machine for polishing channel-cut crystals. The initial effort led to inefficient results. Since then, we conceptualized, designed, and implemented a new version of the channel-cut polishing machine, now called C-CHiRP (Channel-Cut High Resolution Polisher), also known as CCPM V2.0. The new machine design no longer utilizes Figure-8 motion that mimics manual polishing. Instead, the polishing is achieved by a combination of rotary and linear functions of two coordinated motion systems. Here we present the new design of C-CHiRP, its capabilities and features. Multiple channel-cut crystals polished using the C-CHiRP have been deployed into several beamlines at the Advanced Photon Source (APS). We present the measurements of surface finish, flatness, as well as topography results obtained at 1-BM of APS, as compared with results typically achieved when polishing flat-surface monochromator crystals using conventional polishing processes. Limitations of the current machine design, capabilities and considerations for strain-free polishing of highly complex crystals are also discussed, together with an outlook for future developments and improvements.

  17. Influence of polishing on surface roughness following toothbrushing wear of composite resins.

    Science.gov (United States)

    Dalla-Vecchia, Karine Battestin; Taborda, Talita Damas; Stona, Deborah; Pressi, Heloísa; Burnett Júnior, Luiz Henrique; Rodrigues-Junior, Sinval Adalberto

    2017-01-01

    This study aimed to evaluate the influence of different polishing systems on the surface roughness of composite resins following procedures to simulate the effects of toothbrushing over time. Four currently available commercial composites were used to make 128 cylindrical specimens. The specimens were randomly allocated to polishing with a 1-step polisher or 1 of 3 multistep polishers (n = 8 per group). The baseline surface roughness was measured, and the specimens were submitted to 5000, 10,000, and 20,000 brushing cycles to represent toothbrushing throughout 6, 12, and 24 months, respectively. Results showed that surface roughness was influenced by the type of composite and polishing system and was not influenced by the simulated toothbrushing time. However, the surface roughness, as challenged by toothbrushing wear, was affected by the interaction among the composite, the polisher, and the toothbrushing time. The 1-step polisher produced the highest surface roughness and influenced toothbrushing wear resistance of some composites.

  18. Standing Concertation Committee

    CERN Multimedia

    2007-01-01

    Ordinary meeting on 30 January 2007 The main items discussed at the meeting of the Standing Concertation Committee on 30 January 2007 included: Administrative Circular No. 26: with the introduction of the merit recognition system in the framework of the 5-yearly review of CERN employment conditions, Administrative Circular No. 26 has been revised. The committee took note of the revised document which is being finalized for submission to the Director-General for approval in the near future. Technical analysis of CERN Health Insurance Scheme: the Committee was informed that a group has been set up by the Director-General to analyse the financial situation of the CERN Health Insurance Scheme in the short and long term, and to propose measures to ensure that the Scheme remains in financial balance, with adequate cover, over the medium term. The group's terms of reference and membership were communicated. Voluntary programmes It was announced that the programmes: 'part-time work as a pre-retirement measure...

  19. Standing Concertation Committee

    CERN Multimedia

    2007-01-01

    ORDINARY MEETING ON 30 JANUARY 2007 The main items discussed at the meeting of the Standing Concertation Committee on 30 January 2007 included: Administrative Circular No. 26: with the introduction of the merit recognition system in the framework of the 5-yearly review of CERN employment conditions, Administrative Circular No. 26 has been revised. The Committee took note of the revised document which is being finalized for submission to the Director-General for approval in the near future. Technical analysis of CERN Health Insurance Scheme: the Committee was informed that a group has been set up by the Director-General to analyse the financial situation of the CERN Health Insurance Scheme in the short and long term, and to propose measures to ensure that the Scheme remains in financial balance, with adequate cover, over the medium term. The group's terms of reference and membership were communicated. Voluntary programmes It was announced that the programmes: 'part-time work as a pre-retirement mea...

  20. Standing Concertation Committee

    CERN Document Server

    HR Department

    2007-01-01

    ORDINARY MEETING ON 27 FEBRUARY 2007 The main items discussed at the meeting of the Standing Concertation Committee on 27 February 2007 included: Saved Leave Scheme (SLS): It was announced that a Management/Staff Association working group had been set up to discuss the Saved Leave Scheme (SLS): Members : M. Büttner, E. Chiaveri (chair), Ph. Defert, D. Klem, M. Vitasse, J.-M. Saint-Viteux. It was noted that the Staff Association was launching a questionnaire on SLS and distributed to all members of the personnel. Merit Recognition Guidelines: In the context of the new Merit Appraisal and Recognition Scheme (MARS), the committee took note of the CERN-wide 2007 Merit Recognition Guidelines, including the Frequently Asked Questions on HR Department's dedicated website. Information on CERN's medium and long-term plans (MTP-LTP)/Contract renewals/ External mobility The Committee took note of the information provided on CERN's MTP-LTP and of documentation distributed at the meeting by the Staff ...

  1. Transboundary Air-Pollution Transport in the Czech-Polish Border Region between the Cities of Ostrava and Katowice.

    Science.gov (United States)

    Černikovský, Libor; Krejčí, Blanka; Blažek, Zdeněk; Volná, Vladimíra

    2016-12-01

    The Czech Hydrometeorological Institute (CHMI) estimated the transboundary transport of air pollution between the Czech Republic and Poland by assessing relationships between weather conditions and air pollution in the area as part of the "Air Quality Information System in the Polish-Czech border of the Silesian and Moravian-Silesian region" project (http://www.air-silesia.eu). Estimation of cross-border transport of pollutants is important for Czech-Polish negotiations and targeted measures for improving air quality. Direct measurement of PM 10 and sulphur dioxide (SO 2 ) concentrations and the direction and wind speed from measuring stations in the vicinity of the Czech-Polish state border in 2006-2012. Taking into account all the inaccuracies, simplifications and uncertainties, by which all of the measurements are affected, it is possible to state that the PM 10 transboundary transport was greater from the direction of Poland to the Czech Republic, rather than the other way around. Nevertheless, the highest share of the overall PM 10 concentration load was recorded on days with a vaguely estimated airflow direction. This usually included days with changing wind direction or days with a distinct wind change throughout the given day. A changeable wind is most common during low wind speeds. It can be assumed that during such days with an ambiguous daily airflow, the polluted air saturated with sources on both sides of the border moves from one country to the other. Therefore, we could roughly ascribe an equal level of these concentrations to both the Czech and Polish side. PM 10 transboundary transport was higher from Poland to the Czech Republic than from the opposite direction, despite the predominant air flow from the Czech Republic to Poland. Copyright© by the National Institute of Public Health, Prague 2016

  2. Polish media and public opinion on NPP Mochovce commissioning

    International Nuclear Information System (INIS)

    Latek, Stanislaw

    1999-01-01

    The so called 'Mochovce Problem' was one of the major topics in Polish media in the period from May to July 1998. The nuclear power plant commissioning caused an unexpectedly strong reaction, especially in the newspapers, slightly less so in electronic media. Faced with clearly hostile media reaction to Mochovce NPP, the National Atomic Energy Agency representatives, together with atomic and nuclear experts, undertook to change these attitudes. In numerous interviews, letters to the editors and talks with journalists, they attempted to correct the mistakes, explain the true safety situation in the nuclear power plant, by whom it was constructed, who supervised and tested the systems and so on. The completion of Mochovce NPP construction improved significantly the electricity balance in Slovakia, thus decreasing the pressure for continuing the operation of older Bohunice V1 units beyond their design lifetime. For this reason, as well as in view of striving for improvement in environmental factors beyond Polish southern border, especially after Kyoto/97 decisions on greenhouse gases emissions, the public opinion in Poland should support the Mochovce NPP construction. In 1996 Poland has signed with Slovakia a bilateral inter-governmental agreement on the prompt notification on nuclear accidents and on the cooperation in the nuclear safety and radiological protection matters. On the basis of this agreement the experts from Polish National Atomic Energy Agency are in perpetual contact with Slovakian Nuclear Regulatory Body and in each and every moment can obtain full and comprehensive information on the plant parameters iportant for nuclear safety. The experts explanations, together with the NAEA top management visit to the plant itself, brought some results. The media became less aggressive, and Polish public and authorities - contrary to the Austrians - do not protest loudly against the commissioning of this newest European NPP. Now, in December 1998, the tune of

  3. Religiousness, religious coping with illness, and psychological function among Polish elderly patients with osteoarthritis undergoing arthroplasty.

    Science.gov (United States)

    Stecz, Patryk; Kocur, Józef

    2015-04-01

    To determine the influence of religious coping and religiousness on the psychological functioning of Polish patients before and after arthroplasty, a prospective study was performed. Out of a pool of 102 potential participants, a total of 61 (34 females, 27 males) completed a purposely created survey, Brief-COPE followed by preoperative and postoperative Perceived Stress Scale, State Trait Anxiety Inventory and Satisfaction with Life Scale. Religious coping was not associated with: (1) perceived stress before or after surgery; (2) preoperative or postoperative anxiety; (3) life satisfaction. A two-factor ANOVA has shown that religious coping controlled by religiousness was related to better psychological functioning. Between- and within-subjects effects were observed for improvement in life satisfaction measured by split-plot ANOVA, which suggests (p religious orientation. We concluded that religious strategies in dealing with stress measured by Brief-COPE were least likely to benefit patients of low-religious orientation. The study demonstrated the importance of core religious beliefs in predicting benefits derived from religiousness in the face of a crisis. This study showed that regardless of its effectiveness, turning to religion is common among Polish patients about to undergo surgery for osteoarthritis of the hip.

  4. An investigation and analysis of safety issues in Polish small construction plants.

    Science.gov (United States)

    Dąbrowski, Andrzej

    2015-01-01

    The construction industry is a booming sector of the Polish economy; however, it is stigmatised by a lower classification due to high occupational risks and an unsatisfactory state of occupational safety. Safety on construction sites is compromised by small construction firms which dominate the market and have high accident rates. This article presents the results of studies (using a checklist) conducted in small Polish construction companies in terms of selected aspects of safety, such as co-operation with the general contractor, occupational health and safety documents, occupational risk assessment, organization of work, protective gear and general work equipment. The mentioned studies and analyses provided the grounds to establish the main directions of preventive measures decreasing occupational risk in small construction companies, e.g., an increase in engagement of investors and general contractors, improvement of occupational health and safety (OSH) documents, an increase in efficiency of construction site managers, better stability of employment and removal of opposing objectives between economic strategy and work safety.

  5. THE INFLATION IMPACT OF SELECTED EUROPEAN UNION MEMBERS ON POLISH INFLATION

    Directory of Open Access Journals (Sweden)

    Jarosław Czaja

    2012-06-01

    Full Text Available The article aims at determining the inflation influence between Poland and selected EU member states. Although for some time the general inflation level in those countries was definitely controllable, the problem seems to be returning. That is why in this article, using the model of Vector AutoRegression (VAR and Granger causality test, we are attempting to determine inflation influences on Poland. The study confirmed the impact of the selected countries on Polish inflation, expressed the general HICP index. However, in the case of Germany, the method has not proved the existence of such interactions. For this reason, it is made an attempt to clarify the reasons for non-compliance findings with data showing Germany as a Polish main trading partner for more than two decades. The authors try to show that lack of influence can be seen in the excessive generality of the main HICP index and predict that the chosen method confirm the effect of foreign trade indices in the HICP.

  6. [Perceived Autonomy in Old Age scale: Factor structure and psychometric properties of the Polish adaptation].

    Science.gov (United States)

    Kroemeke, Aleksandra

    2015-01-01

    Sense of autonomy - the possibility to choose and decide - is one of the markers of positive and active aging. The goal of this study was to examine the Polish adaptation of the Perceived Autonomy in Old Age (PAA) scale and to determine its internal structure and psychometric properties: reliability, as well as construct and discriminant validity. 277 seniors (female=187; male=90), without cognitive function disorders aged 60 to 100 (M=77.4; SD=9.2) took part in the study. Apart from the PAA, the ADL and IADL scales (self-reliance assessment) were used, as well as the Emotional State Questionnaire (a measure for positive and negative emotions) and the WHOQoL-Brief (a measure for health-related quality of life). As a result of an exploratory and confirmation factor analysis a one-factor tool with five items was built. Reliability coefficients of the scale measured with the internal consistency method and test-retest were ≥ 0.80. Positive correlations were found with indicators in the ADL, IADL, as well as in the somatic and psychological domain of life quality, and positive emotions. Negative correlations were found for negative emotions. The obtained results indicated very high reliability and accuracy for the Polish adaptation of the SPA. The tool can be used as a predictor and/or indicator of successful aging and life quality of seniors.

  7. The socio-economic and spatial transformation of Polish cities after 1989

    Directory of Open Access Journals (Sweden)

    Jerzy J. Parysek

    2004-01-01

    Full Text Available The aim of this paper is to present the socio-economic and spatial transformation of Polishcities after 1989. The Polish changes reached the structures of the three basic subsystems ofthe state: political (power, social (society, and economic (the economy. The systemictransformation that has taken place in Poland after 1989 is most readily visible in towns,although it was introduced in the country as a whole. For the development and transformationof towns, the most important were the introduction of local government structures andthe market model of the economy. The restitution of local government has ensured townsan authentic manager authorised to perform his function by the local community. The introductionof the market model to the economy has resulted in its privatisation and the appearanceof enterprise and competition. Towns, especially the biggest cities, have becomeattractive locations for investment. Cities with a balanced economic structure and well-developedinfrastructure had much better chances for growth to start with. Unfortunately, thetransformation period has also had some detrimental effects, the most important being unemploymentand all kinds of social deviance. However, Polish cities are certainly differenttoday and resemble Western cities to a greater extent than did the so-called socialist townsbuilt along theoretically beautiful but practically ineffectual ideological lines.

  8. Constitutive law for the densification of fused silica with applications in polishing and microgrinding

    Science.gov (United States)

    Lambropoulos, John C.; Fang, Tong; Xu, Su; Gracewski, Sheryl M.

    1995-09-01

    We discuss a constitutive model describing the permanent densification of fused silica under large applied pressures and shear stresses. The constitutive law is assumed to be rate- independent, and uses a yield function coupling hydrostatic pressure and shear stress, a flow rule describing the evolution of permanent strains after initial densification, and a hardening rule describing the dependence of the incremental densification on the levels of applied stresses. The constitutive law accounts for multiaxial states of stress, since during polishing and grinding operations complex stress states occur in a thin surface layer due to the action of abrasive particles. Due to frictional and other abrasive forces, large shear stresses are present near the surface during manufacturing. We apply the constitutive law in estimating the extent of the densified layer during the mechanical interaction of an abrasive grain and a flat surface.

  9. Pulsed Power Peer Review Committee Report

    International Nuclear Information System (INIS)

    BLOOMQUIST, DOUGLAS D.

    2002-01-01

    In 1993, the Government Performance and Results Act (GPRA, PL 103-62) was enacted. GPRA, which applies to all federal programs, has three components: strategic plans, annual performance plans, and metrics to show how well annual plans are being followed. As part of meeting the GRPA requirement in FY2002, a 15-member external review committee chaired by Dr. Alvin Trivelpiece (the Trivelpiece Committee) was convened by Sandia National Laboratories (SNL) on May 7-9, 2002 to review Sandia National Laboratories' Pulsed Power Programs as a component of the Performance Appraisal Process negotiated with the National Nuclear Security Administration of the Department of Energy (NNSA/DOE). The scope of the review included activities in high energy density physics (HEDP), inertial confinement fusion (ICF), radiation/weapon physics, the petawatt laser initiative (PW) and fast ignition, equation-of-state studies, radiation effects science and lethality, x-ray radiography, ZR development, basic research and pulsed power technology research and development, as well as electromagnetics and work for others. In his charge to the Committee, Dr. Jeffrey P. Quintenz, Director of Pulsed Power Sciences (Org. 1600) asked that the evaluation and feedback be based on three criteria: (1) quality of technical activities in science, technology, and engineering, (2) programmatic performance, management, and planning, and (3) relevance to national needs and agency missions. In addition, the director posed specific programmatic questions. The accompanying report, produced as a SAND document, is the report of the Committee's finding

  10. Natural immunity factors in Polish mixed breed rabbits.

    Science.gov (United States)

    Tokarz-Deptuła, B; Niedźwiedzka-Rystwej, P; Adamiak, M; Hukowska-Szematowicz, B; Trzeciak-Ryczek, A; Deptuła, W

    2015-01-01

    Mixed-breed rabbits in Poland are widely used for diagnostic and scientific research and as utility animals, therefore there is a need to know their immunological status, as well as their haematological status. In this study natural immunity factors were analyzed in Polish mixed-breed rabbits and Polish mixed-breed rabbits with addition of blood of meet-breed, considering the impact of sex and season of the year (spring, summer, autumn, winter) using measurement of non-specific cellular and humoral immunity parameters in peripheral blood. The study has revealed that there is a variety between the two commonly used mixed-breed types of rabbits, especially when sex and season is concerned, which is crucial for using these animals in experiments.

  11. Impact of polishing on the light scattering at aerogel surface

    International Nuclear Information System (INIS)

    Barnyakov, A.Yu.; Barnyakov, M.Yu.; Bobrovnikov, V.S.; Buzykaev, A.R.; Danilyuk, A.F.; Katcin, A.A.; Kononov, S.A.; Kirilenko, P.S.; Kravchenko, E.A.; Kuyanov, I.A.; Onuchin, A.P.; Ovtin, I.V.; Predein, A.Yu.; Protsenko, R.S.

    2016-01-01

    Particle identification power of modern aerogel RICH detectors strongly depends on optical quality of radiators. It was shown that wavelength dependence of aerogel tile transparency after polishing cannot be described by the standard Hunt formula. The Hunt formula has been modified to describe scattering in a thin layer of silica dust on the surface of aerogel tile. Several procedures of polishing of aerogel tile have been tested. The best result has been achieved while using natural silk tissue. The resulting block has optical smooth surfaces. The measured decrease of aerogel transparency due to surface scattering is about few percent. This result could be used for production of radiators for the Focusing Aerogel RICH detectors.

  12. Problems in laser repair welding of polished surfaces

    Directory of Open Access Journals (Sweden)

    A. Skumavc

    2014-10-01

    Full Text Available This paper presents problems in laser repair welding of the tools for injection moulding of plastics and light metals. Tools for injection moulding of the car headlamps are highly polished in order to get a desirable quality of the injected part. Different light metals, glasses, elastomers, thermoplastics and thermosetting polymers are injected into the die cavity under high pressures resulting in the surface damages of the tool. Laser welding is the only suitable repair welding technique due to the very limited sputtering during deposition of the filler metal. Overlapping of the welds results in inhomogeneous hardness of the remanufactured surface. Results have shown strong correlation between hardness and surface waviness after final polishing of the repair welded surface.

  13. E-TOURISM SERVICES IN POLISH TOURISTS' OPINIONS

    Directory of Open Access Journals (Sweden)

    Joanna Papińska-Kacperek

    2013-07-01

    Full Text Available E-tourism is most often related only with web pages of travel agencies or aggregators offering many services, where it is possible to make transactions electronically. Whereas many applications and devices are applied in tourism, like the audio guides and mobile guides (sometimes with augmented reality functions, electronic cards in museums, 2D codes systems, web pages for individual tourists, geographic information systems (e.g. Google Street View, social network sites recommendation, and profiles of cities on social networks sites like Facebook. Polish tourists' opinions about mentioned innovative tools will be presented as the report from the survey conducted among students and graduates from three Polish universities. The objectives of the study are: investigating the popularity of e-tourist services in Poland and verifying whether municipal authorities promote e-tourism initiatives.

  14. Legal aspects of Polish Tax and Social Security in Agriculture

    Directory of Open Access Journals (Sweden)

    Agnieszka Parlińska

    2008-12-01

    Full Text Available In the paper are describing legal aspects of treatment of farming sector in the tax and social security system in Poland. Tax System in Polish Agriculture is an integral part of Polish Tax System. Most taxes paid by farmers are property taxes, which supplied the budget of main local authority in Poland (municipality. In some cases farmers pay also personal income tax and value added tax like those, who run specific agricultural production as well individual farmers who operate through a limited liability company are subject to corporate income tax. The social security fund for farmers (known as KRUS was speared in 1990 from the social security system (ZUS. Farmers receive similar benefits with regard to health care, education, and social welfare although the contributions into the farmers system are lower then under the ZUS system.

  15. Edge effect modeling of small tool polishing in planetary movement

    Science.gov (United States)

    Li, Qi-xin; Ma, Zhen; Jiang, Bo; Yao, Yong-sheng

    2018-03-01

    As one of the most challenging problems in Computer Controlled Optical Surfacing (CCOS), the edge effect greatly affects the polishing accuracy and efficiency. CCOS rely on stable tool influence function (TIF), however, at the edge of the mirror surface,with the grinding head out of the mirror ,the contact area and pressure distribution changes, which resulting in a non-linear change of TIF, and leads to tilting or sagging at the edge of the mirror. In order reduce the adverse effects and improve the polishing accuracy and efficiency. In this paper, we used the finite element simulation to analyze the pressure distribution at the mirror edge and combined with the improved traditional method to establish a new model. The new method fully considered the non-uniformity of pressure distribution. After modeling the TIFs in different locations, the description and prediction of the edge effects are realized, which has a positive significance on the control and suppression of edge effects

  16. Africa and Its People in the Polish Media

    Directory of Open Access Journals (Sweden)

    Średziński Paweł

    2017-06-01

    Full Text Available The African continent is treated by the Polish media marginally and usually seen through the lens of four domains of stereotypical perceptions that are associated with difficult life conditions, threats and dangers, beautiful and wild nature, as well as original and diverse cultures. Monitoring of the Polish media has become very important in this situation. That is why the results of first media monitoring report were published in 2011 by ‘Africa Another Way’ Foundation. Five years later the monitoring was repeated. It is hard to resist the impression that Africa is still viewed as this poor, underdeveloped and dangerous continent. And the way it is presented translates into the way individuals of African descent are perceived.

  17. Restaurants and hotels expenditure in Polish households of the elderly

    Directory of Open Access Journals (Sweden)

    Piekut Marlena

    2016-03-01

    Full Text Available The age of household members is an important factor for expenditures. The aim of the study is to investigate the level of expenditure on restaurants and hotels incurred in Polish households of the elderly in 2004-2013 and to identify the factors affecting such expenditures. The source of information used in the study was the household budget survey of the Central Statistical Office of Poland. The main methods used in this study were variance analysis and regression analysis. Restaurants and hotels expenditure increases every year together with their share in total household expenditure. The most important factors affecting the restaurants and hotels spending in Polish households of the elderly are: income per capita and the level of education of the head of the family. The study on consumption determinants at different groups leads to better understanding of consumer behavior circumstances and thereby ensuring a good quality of life for the people of the elderly.

  18. Nuclear third party liability under Polish law

    International Nuclear Information System (INIS)

    Lewaszkiewic-Petrykowska, B.

    1988-01-01

    This paper describes the system governing liability for nuclear incidents in Poland. The Atomic Energy Act of 10 April 1986, which entered into force on 1 July 1986, covers all aspects of nuclear activities, including third party liability. Such liability is channelled onto the nuclear operator who must take out insurance to cover his liability up to an amount fixed in the contract. The Act provides that questions not settled by its provisions are governed by the Civil Code; therefore, if personal injuries exceed that amount victims may claim the difference from the State under that Code (NEA) [fr

  19. Industrial environmental practices in Polish Firms

    DEFF Research Database (Denmark)

    Kræmer, Trine Pipi

    , and environment. The five case firms all had a Communist past. The firms represent three different industrial sectors; i.e. textile, energy, and publishing and printing industries. Furthermore, the firms are both private and state owned as well as in the process of privatisation.......The study investigates how discursive developments in Poland interact with industrial environmental practices in five production firms. The analysis of the discursive development covers the period from the end of World War I to the turn of the century. The areas in focus are identity, industry...

  20. Ethics committees in Italy--a time for change?

    Science.gov (United States)

    Wray, E

    2000-01-01

    The Comitato Nazionale per la Bioetica (CNB) in Italy has recently produced an unprecedented discussion document on the state of ethics committees in Italy, with an invitation to interested parties to comment on proposed changes to their fundamental structure. After this consultation, and taking note of relevant official publications and the most recent national and international literature on the subject, the CNB proposes to produce a final, definitive document that will consider options for the future development of such committees.

  1. Macroeconomic Reasons of Debts in Polish Health Service

    Directory of Open Access Journals (Sweden)

    Kamila Szymańska

    2008-04-01

    Full Text Available The article deals with the problem of debts in polish health service. Author analyzes the macroeconomic reasons of this situation. As a main reasons are indicated: a specificity of the health service market, which leads to a inefficient allocation of health services, lack of reliable data on health care system, too low level of public expenditure on a health care, inappropriate allocation of public capital and a monopolistic position of the payer.

  2. Ion beam polishing for three-dimensional electron backscattered diffraction

    DEFF Research Database (Denmark)

    Saowadee, Nath; Agersted, Karsten; Ubhi, H.S.

    2013-01-01

    averaging and/or poor 3D-EBSD data quality. In this work a low kV focused ion beam was successfully implemented to automatically polish surfaces during 3D-EBSD of La- and Nb-doped strontium titanate of volume 12.6 × 12.6 × 3.0 μm. The key to achieving this technique is the combination of a defocused low k...

  3. Polish epistolography in Ukrainian polemic of the 17th century

    Directory of Open Access Journals (Sweden)

    Sukhareva Svitlana Volodymyrivna

    2013-06-01

    Full Text Available The block of Polish epistolary in the system of polemical prose of the 17th century is analyzed in the article. It's indicated in its genre features, holistic character, publicistic and artistic level. Special attention is paid to the epistolary style of Hypatij Potij, Andrew Muzhylovski and Klyryk from Ostrog. Innovative and classical elements of epistolary heritage of the Baroque epoch are identified.

  4. Sports metaphors in Polish written commentaries on politics

    OpenAIRE

    Jarosław Wiliński

    2015-01-01

    This paper seeks to investigate what sports metaphors are used in Polish written commentaries on politics and what special purpose they serve. In particular, the paper examines structural metaphors that come from the lexicon of popular sports, such as boxing, racing, track and field athletics, sailing, etc. The language data, derived from English Internet websites, has been grouped and discussed according to source domains. Applying George Lakoff and Mark Johnson’s approach to metaphor, the p...

  5. Mutual Fund Performances of Polish Domestic Equity Fund Managers

    OpenAIRE

    Tan, Ömer Faruk; Ünal, Gözde

    2015-01-01

    Purpose of the article: The main purpose of the paper is empirically evaluating selectivity skills and market timing ability of Polish fund managers during the period from January 2009 to November 2014. After the global financial crisis of 2008, in this period of quantitative easing (QE), thanks to an increase in the money supply, a capital flow from developed countries to developing countries was observed. In this study, we try to analyse that although the financial market in Pol...

  6. Consolidation Processes: Raiders & Targets in Polish Financial Institutions

    OpenAIRE

    Poteraj, Jarosław

    2004-01-01

    The work consists of five chapters, an annex and an appendix. In the first chapter the author describes the point of consolidation processes, presents: the meaning of consolidation processes, active and institutional aspects of merger execution, gives a classification of the consolidation processes and considers conditions of execution of consolidations processes in the Polish law, The next chapter concerns reasons of consolidation processes. The author describes there in turn: motives of the...

  7. Mutual Fund Performances of Polish Domestic Equity Fund Managers

    Directory of Open Access Journals (Sweden)

    ömer faruk tan

    2015-10-01

    Full Text Available Purpose of the article: The main purpose of the paper is empirically evaluating selectivity skills and market timing ability of Polish fund managers during the period from January 2009 to November 2014. After the global financial crisis of 2008, in this period of quantitative easing (QE, thanks to an increase in the money supply, a capital flow from developed countries to developing countries was observed. In this study, we try to analyse that although the financial market in Poland made an incredible progress, whether fund managers show better or worse performance than the market. Methodology/Methods: In order to evaluate fund manager performances, Jensen alpha (1968 is computed, which depicts selectivity skills of fund managers. For determining market timing ability of fund managers, Treynor & Mazuy (1966 regression analysis and Henriksson & Merton (1981 regression analysis are applied. Fund performances are evaluated using Warsaw Stock Exchange Index as the benchmark index. Scientific aim: In this study, we have tried to evaluate selectivity skills and market timing ability of Polish fund managers. A total of 14 equity fund managers’ performances are analysed. The study can be guiding especially for investors who are interested in Polish equity fund performances in a period where emerging stock markets outperformed with quantitative easing. Findings: Jensen (1968 alphas indicate that over this period fund managers did not have selective ability, as none of the 14 funds had statistically significant positive alphas. Furthermore, Treynor & Mazuy (1966 and Henriksson & Merton (1981 regression analysis indicate that over the same period fund managers did not also have market timing ability, as again none of the 14 funds had statistically significant positive coefficients. Conclusions: In this work, we can detect that in the era of quantitative easing, although the financial market in Poland made an incredible progress, the fund returns were

  8. Fracking in the Polish press: Geopolitics and national identity

    International Nuclear Information System (INIS)

    Jaspal, Rusi; Nerlich, Brigitte; Lemańcyzk, Szczepan

    2014-01-01

    In a context of resource scarcity and political instability, new energy sources and technologies are being explored in many parts of the world and exploited in some. One of these new energy sources is shale gas and one of the countries seeking to decrease its energy dependence and increase its energy security is Poland which is largely dependent on gas and oil imports from Russia. This article presents the results of a thematic content analysis of articles reporting on shale gas/fracking published in Gazeta Wyborcza and Rzeczpospolita, two leading Polish newspapers, from 1 January 2010 to 31 December 2012. Findings suggest that in media reporting the geopolitical dimension of fracking overrides the technological/scientific dimension and that representations are overwhelmingly positive. Positive representations are bolstered through particular linguistic framings. It is argued that the Polish press has polarized the debate on fracking in a particular (positive) direction, which has silenced an open and constructive debate concerning energy policy in Poland and constructed criticism of fracking as counter-normative and “un-Polish.” The potential socio-political and policy implications of these media representations are discussed. - Highlights: • The general tone of Polish media reporting is positive and emphatic about the benefits of fracking. • The geopolitical dimension of fracking overrides the technological/scientific dimension. • The implementation of fracking is constructed as a national priority. • Opposition to fracking is constructed as counter-normative and “anti-Polish”. • Representations impede open and constructive dialogue about energy policy

  9. Cogeneration – development and prospect in Polish energy sector

    Directory of Open Access Journals (Sweden)

    Matuszewska Dominika

    2017-01-01

    Full Text Available Next 10-15 years are crucial for condition of Polish energy sector in light of challenges arising mainly from increasing demand for electric energy, need of reducing greenhouse gases emissions and shutdowns of old units. In this situation cogeneration can be one of the most rational way to meet those circumstances. This paper analyzes present development of cogeneration in Poland and its prospect for future.

  10. Between Positivism, Narrativism and Idealisation in Polish Methodology of History

    OpenAIRE

    Brzechczyn, Krzysztof

    2014-01-01

    This paper has two main purposes. Its primary purpose is to present the reception of the discussion between positivism and narrativism in Polish methodology of history. A secondary one is to paraphrase, using the notion apparatus of the idealisational theory of science, the issue of the accuracy of explanation. The paper consists of six parts. In the first, Hempel’s deductive-nomological (or covering law) model of explanation is presented. In the second part, the main tenets and assumptions o...

  11. Efficiency as a parameter for assessing the Polish healthcare system

    Directory of Open Access Journals (Sweden)

    Magdalena Bogdan

    2018-04-01

    Full Text Available Introduction. Efficacy is defined as one of the most valid parameters of health system evaluation. It should be said that there is no consistent definition of the concept of effectiveness in health care, which would allow for the evaluation and comparison of health systems in the world. One can not point to the best or even near ideal of the health system. However, you can rank individual health systems with respect to the evaluation of individual parameters or groups of parameters. One of the possibilities is to evaluate the effectiveness of the system. Aim of the study. The aim of the article is to define and analyze particular types of system effectiveness in the context of the Polish health system. Description of knowledge. The literature on the subject is divided into operational and dynamic efficiency. Dynamic efficiency is divided into adaptive and innovative. The Polish health system is characterized by high operational efficiency. Operational efficiency determines the intensity of the system. The key factor for improving the health of the Polish society, as a factor of socio-economic development of the country is to improve the dynamic efficiency of the system. Conclusions. Health care in Poland has high operational efficiency while low dynamic efficiency, both adaptive and innovative, which clearly demonstrates the existence of a paradox of the overall effectiveness of the health care system in Poland.

  12. Cleaning, abrasion, and polishing effect of novel perlite toothpaste abrasive.

    Science.gov (United States)

    Wang, Bo

    2013-01-01

    This study was intended to optimize perlite particle size and morphology for better tooth cleaning and lower tooth abrasion, and to evaluate the performance of a whitening toothpaste containing the optimized perlite abrasive for tooth cleaning, abrasion, and polishing. Perlite toothpaste abrasive samples were prepared by air classifying a commercial expanded perlite product. The tooth cleaning and abrasion properties for these classified perlite samples were reported via the pellicle cleaning ratio (PCR) and relative dentin abrasion (RDA). Performance of the whitening toothpaste containing the optimized perlite abrasive in tooth cleaning, polishing, and abrasion was evaluated against a widely used synthetic high-cleaning silica. Air classification removes large perlite particles and also physically changes perlite particle morphology from mostly three dimensional and angular particles to mainly two dimensional and platy particles. All the classified samples show good tooth cleaning effect, but tooth abrasion decreases significantly with decreasing particle size. Compared to high-cleaning silica whitening toothpaste, the whitening toothpaste containing the optimized perlite abrasive (PerlClean) is slightly better at tooth cleaning, lower in tooth abrasion, and significantly better at tooth polishing. Fine platy perlite particles are effective in tooth cleaning with low tooth abrasion. The enhanced performance of optimized perlite toothpaste abrasive compared to high-cleaning silica in a whitening toothpaste is attributed to the optimized particle size distribution and the unique platy particle geometry.

  13. The Persistence of Abnormal Returns: Analysis of Polish Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Marcin Puziak

    2017-06-01

    Full Text Available The ultimate goal of a company is to build the enterprise value, which is achievable thanks to abnormal profits generated in particular period. Moreover, firms are expected to take measures to maintain abnormal profit in the future. On the other hand, abnormal profits attract competitors, who increase competition and as a result abnormal profits disappear. The persistence of profit is a term that describes a situation, when the company is successful in maintaining the abnormal profit over time. The main aim of this paper is to investigate the persistence of abnormal profit in Polish manufacturing sector. In other words, the question is whether Polish manufacturing companies are able to maintain their abnormal profits over time. The persistence of abnormal profits is investigated using dynamic panel model with generalized method-of-moments estimators. The method is applied to a panel of 5303 Polish companies from manufacturing sector observed over the period 2006-2014. This paper contributes to the existing literature in two ways. First, analysis is performed for developing country. Second, analysis is performed both at the level of entire sector and at division level. Three main conclusions can be drawn from the conducted research: there are significant differences between profit rates within the same industry at division level; estimated persistence of abnormal profit coefficients are at moderate level; there are substantial differences between estimated persistence of profit coefficients for divisions in the same industry.

  14. The prevalence of burnout syndrome in Polish anaesthesiologists.

    Science.gov (United States)

    Misiołek, Aleksandra; Gorczyca, Piotr; Misiołek, Hanna; Gierlotka, Zbigniew

    2014-01-01

    Burnout syndrome is a psychological response to chronic work-related stress characterized by low enthusiasm towards the job, high psychological exhaustion, indolence and guilt. Being a medical doctor, both in Poland and in other countries, is one of the most stressful occupations and anaesthesiology is considered one of the most stressful specializations, which justify carrying out of the study on Polish anaesthesiologists. The aim of the study was to determine the prevalence of burnout syndrome in Polish anaesthesiologists Non-randomized cross-sectional study was carried out and data were gathered through a self-administrated questionnaire. The sample consisted of 373 Polish anaesthesiologists, 57.6% were women and 42.4% were men. A 66% response rate was achieved. The Burnout Syndrome was measured by the Spanish Burnout Inventory. The prevalence burnout risk was almost 70%. The percentage of participants who indicated very high levels of burnout was 18%; 5.9% of whom fell into profile 2 considered to be clinical. The instrument applied was reliable with Cronbach's alphas exceeding 0.70. The sample is characterized by high burnout risk with 5.9% of clinical cases. Participation in prevention programs is recommended.

  15. A Comparative Analysis of Polish and Czech International New Ventures

    Directory of Open Access Journals (Sweden)

    Lidia Danik

    2016-06-01

    Full Text Available The goal of this paper is to compare the characteristics of Polish and Czech companies which follow the Born Global internationalization model. More concretely, the analysis aims to discover the differences or similarities in terms of the internationalization paths of Polish and Czech SMEs in the characteristics of their managers in terms of the so-called “international vision” and in their innovativeness level. The introductory part of article provides a description of this internationalization model and the International New Ventures traits (INV and summarizes the recent studies on this topic conducted in Poland and Czech Republic. In the empirical part, the International New Ventures from the two countries are compared. The Polish sample includes 105 companies which were surveyed with use of computer assisted telephone interviews in autumn 2014. For the Czech Republic, the sample consists of 54 small and medium-sized companies, which were surveyed using the computer assisted web interviews from November 2013 till January 2014. The surveyed companies in both countries fulfilled the definition of Born Globals. Descriptive statistics, cross-tabulation analysis and non-parametric tests are applied to accomplish the goals of the paper.

  16. Fungal Biomass Protein Production from Trichoderma harzianum Using Rice Polishing.

    Science.gov (United States)

    Ahmed, Sibtain; Mustafa, Ghulam; Arshad, Muhammad; Rajoka, Muhammad Ibrahim

    2017-01-01

    Industrially important enzymes and microbial biomass proteins have been produced from fungi for more than 50 years. High levels of crude protein as much as 45% are present in fungal biomass with balanced essential amino acids. The aim of this study was to access the potential of Trichoderma harzianum to produce fungal biomass protein from rice polishings. Maximum biomass yield was obtained at 5% (w/v) rice polishings after 72 h of incubation at 28°C at pH 4. Carbon and nitrogen ratio of 20 : 1 gave significantly higher production of fungal biomass protein. The FBP in the 75 L fermenter contained 49.50% crude protein, 32.00% true protein, 19.45% crude fiber, 9.62% ash, 11.5% cellulose content, and 0.325% RNA content. The profile of amino acids of final FBP exhibited that all essential amino acids were present in great quantities. The FBP produced by this fungus has been shown to be of good nutritional value for supplementation to poultry. The results presented in this study have practical implications in that the fungus T. harzianum could be used successfully to produce fungal biomass protein using rice polishings.

  17. Antimicrobial susceptibility of Brachyspira hyodysenteriae isolated from 21 Polish farms.

    Science.gov (United States)

    Zmudzki, J; Szczotka, A; Nowak, A; Strzelecka, H; Grzesiak, A; Pejsak, Z

    2012-01-01

    Swine dysentery (SD) is a common disease among pigs worldwide, which contributes to major production losses. Antimicrobial susceptibility testing of B. hyodysenteriae, the etiological agent of SD, is mainly performed by the agar dilution method. This method has certain limitations due to difficulties in interpretation of results. The aim of this study was the analysis of antimicrobial susceptibility of Brachyspira hyodysenteriae (B. hyodysenteriae) Polish field isolates by broth microdilution procedure. The study was performed on 21 isolates of B. hyodysenteriae, collected between January 2006 to December 2010 from cases of swine dysentery. VetMIC Brachyspira panels with antimicrobial agents (tiamulin, valnemulin, doxycycline, lincomycin, tylosin and ampicillin) were used for susceptibility testing of B. hyodysenteriae. The minimal inhibitory concentration (MIC) was determined by the broth dilution procedure. The lowest antimicrobial activity was demonstrated for tylosin and lincomycin, with inhibition of bacterial growth using concentrations > 128 microg/ml and 32 microg/ml, respectively. In the case of doxycycline, the MIC values were < or = 2.0 microg/ml. No decreased susceptibility to tiamulin was found among the Polish isolates and MIC values for this antibiotic did not exceed 1.0 microg/ml. The results of the present study confirmed that Polish B. hyodysenteriae isolates were susceptible to the main antibiotics (tiamulin and valnemulin) used in treatment of swine dysentery. Further studies are necessary to evaluate a possible slow decrease in susceptibility to tiamulin and valnemulin of B. hyodysenteriae strains in Poland.

  18. Surface qualities after chemical-mechanical polishing on thin films

    International Nuclear Information System (INIS)

    Fu, Wei-En; Lin, Tzeng-Yow; Chen, Meng-Ke; Chen, Chao-Chang A.

    2009-01-01

    Demands for substrate and film surface planarizations significantly increase as the feature sizes of Integrated Circuit (IC) components continue to shrink. Chemical Mechanical Polishing (CMP), incorporating chemical and mechanical interactions to planarize chemically modified surface layers, has been one of the major manufacturing processes to provide global and local surface planarizations in IC fabrications. Not only is the material removal rate a concern, the qualities of the CMP produced surface are critical as well, such as surface finish, defects and surface stresses. This paper is to examine the CMP produced surface roughness on tungsten or W thin films based on the CMP process conditions. The W thin films with thickness below 1000 nm on silicon wafer were chemical-mechanical polished at different down pressures and platen speeds to produce different surface roughness. The surface roughness measurements were performed by an atomic force microscope (DI D3100). Results show that the quality of surface finish (R a value) is determined by the combined effects of down pressures and platen speeds. An optimal polishing condition is, then, possible for selecting the down pressures and platen speeds.

  19. Preparation of cerium oxide for lens polishing powder

    International Nuclear Information System (INIS)

    Injarean, Uthaiwan; Rodthongkom, Chouvana; Pichestapong, Pipat; Changkrurng, Kalaya

    2003-10-01

    Cerium is an element of rare earth group which is called lanthanide series. It is found in the ores like monazite and xenotime which are the tailings of tin mines in the south of Thailand. Cerium is used mostly as lens polishing powder besides the applications in other industries. In this study, cerium extracted from monazite ore breakdown by alkaline process was used for the preparation of lens polishing powder. Cerium hydroxide cake from the process was dissolved by hydrochloric acid and precipitated with oxalic acid. The oxalate precipitate then was calcined to oxide powder and its particle size was measured. Precipitation conditions being studied are concentration of feed cerium chloride solution, concentration of oxalic acid used for the precipitation, concentration of sulfuric acid used as precipitation control reagent and the precipitation temperature. It was found that the appropriate precipitation conditions yielded the fine oxide powder with particle size about 12μm. The oxide powder can be ground to the size of 1-3 μm which is suitable for making lens polishing powder

  20. The Link between National Foreign Policy and the Performance of a Country in the European Union: The Polish Case

    Directory of Open Access Journals (Sweden)

    Joanna Kaminska

    2010-05-01

    Full Text Available This article examines the link between the adaptation of national executives and diplomats to the EU and the capacity of a state to influence EU foreign policy outcomes. It argues that, in the case of Poland, the politicization of the domestic administrative structures before 2004 constrained the ability of the state to impact on the EU’s external agenda after the enlargement. It also claims that a rapid adaptation to the EU occurred only after the Polish accession to the EU, as the will to influence the EU’s policy towards Eastern Europe was a main driver for changes in the national diplomacy.