Polish and German Press Reports on Cooperation between the Foreign Ministers of Both Countries in Resolving the Conflict in Ukraine (February–June 2014

Directory of Open Access Journals (Sweden)

Patecka-Frauenfelder Anna

2016-12-01

Full Text Available Polish-German relations in the first half of 2014 were dominated by the Ukraine crisis. This study is an attempt to answer the question of how Polish and German press assessed the cooperation of both countries in resolving the conflict in Ukraine; to what extent the most widely read magazines associated themselves with the decisions of their politicians and the feelings of their own societies and how much understanding they showed for the arguments of their EU partner. The analysis focuses on the unprecedented mission of the Weimar Triangle foreign ministers to Ukraine in February 2014, which led to an agreement between the Ukrainian opposition and President Viktor Yanukovych. A turning point was the visit paid by Radoslaw Sikorski and Frank-Walter Steinmeier to St. Petersburg in June 2014. The next meetings agreed on by EU partners were held without inviting the Polish partner. In view of the speed of events in the selected time interval, the articles subjected to analysis were taken from the most widely read online editions of national daily newspapers in Poland and Germany.

Restructuring locality: practice, identity and place-making on the German-Polish border

DEFF Research Database (Denmark)

Sandberg, Marie

2016-01-01

Taking cities as analytical entry points for investigating practice, identity and place-making, this article explores the differential restructurings of locality in the twin cities of Görlitz and Zgorzelec on the German-Polish border. Drawing on ethnographic fieldwork, it shows how the local cities......′ leaderships are attempting to wrestle the cities out of their downmarket positioning in the global economy. Deploying a performative research strategy of methodological relationalism, the article examines intersections between these cities′ strategies of situating local youth within urban regeneration...... and cross-border projects and local youth′s preferences for engaging in other kinds of place-making. By ‘seeing’ the cities in border regions through practices of place-making within the multiscalar processes of urban regeneration, new insights about ‘place’ are generated in which city branding...

Elementy szkolenia w piłce nożnej. Różnice w szkoleniu klubu polskiego i niemieckiego = Training elements in football. Differences in the training system between polish club and german club

Directory of Open Access Journals (Sweden)

Paweł Kalinowski

2015-11-01

Abstract In modern football control and monitoring of training can increase the effectiveness of teaching. It’s going to provide coaches and athletes comprehensive training conditions. The results obtained by the athletes representing football in Poland tend to looking for reasons causing this state of affairs. The aim  was to try to show the differences in training football between Polish and German club. The subject of observation and analysis were players representing Polish and German club. Footballers presented the highest levels of sports as evidenced by participation in the highest league in Poland and Germany. The research method was used direct observation and an analysis of the results of youth teams.   Key words: football, German, Poland, training.

Alexithymia in the German general population.

Science.gov (United States)

Franz, Matthias; Popp, Kerstin; Schaefer, Ralf; Sitte, Wolfgang; Schneider, Christine; Hardt, Jochen; Decker, Oliver; Braehler, Elmar

2008-01-01

The Toronto-Alexithymia-Scale (TAS-20) is used worldwide as a valid measurement of alexithymia. Until now, population-based standardization and cut-off values of the German TAS-20 version have not been available. This study provides these by means of a representative German sample and by investigating the factorial structure of the TAS-20. Data were generated from a representative random sample of the German general population (1,859 subjects aged between 20 and 69). The TAS-20 sum score was normally distributed. The mean value was 49.5 (SD=9.3) in men and 48.2 (SD=9.2) in women. Divorce, single and low social status were associated with enhanced sum scores. Ten percent of the population exceeded the TAS-20 sum score threshold of >or=61. The 66th percentile reached 53 for men and 52 for women. Factor analysis identified three factors that match the scales of the English original version. An additional fourth factor ("importance of emotional introspection") was extracted. Total explanation of variance by these four factors was 52.27%. The sum score of the German TAS-20 version is suited for the standardized measure of alexithymia. For selecting alexithymic individuals in experimental studies, the cut-off >or=61 is possibly too restrictive. Therefore, we propose the 66th percentile for the identification of high alexithymics. The TAS-20 sum score is associated with important socio-demographic variables. The factorial structure is reliable; the fourth factor ("importance of emotional introspection") provides differentiation of content and allows for enhanced explanation of variance.

Comparative population genetics of the German shepherd dog in South Africa

Directory of Open Access Journals (Sweden)

N. J. Coutts

2010-01-01

Full Text Available Modern breeding practices strive to achieve distinctive phenotypic uniformity in breeds of dogs, but these strategies are associated with the inevitable loss of genetic diversity. Thus, in parallel with the morphological variation displayed by breeds, purebred dogs commonly express genetic defects as a result of the inbreeding associated with artificial selection and the reduction of selection against disease phenotypes. Microsatellite marker analyses of 15 polymorphic canine loci were used to investigate measures of genetic diversity and population differentiation within and between German-bred and South African-bred German shepherd dogs. These data were quantified by comparison with typically outbred mongrel or crossbred dogs. Both the imported and locally-bred German shepherd dogs exhibited similar levels of genetic diversity. The breed is characterised by only a moderate loss of genetic diversity relative to outbred dogs, despite originating from a single founding sire and experiencing extensive levels of inbreeding throughout the history of the breed. Non-significant population differentiation between the ancestral German and derived South African populations indicates sufficient contemporary gene flow between these populations, suggesting that migration resulting from the importation of breeding stock has mitigated the effects of random genetic drift and a population bottleneck caused by the original founder event in South Africa. Significant differentiation between the combined German shepherd dog population and the outbred dogs illustrates the effects of selection and genetic drift on the breed since its establishment just over 100 years ago.

Genetic association of FTO/IRX region with obesity and overweight in the Polish population.

Directory of Open Access Journals (Sweden)

Marta Sobalska-Kwapis

Full Text Available Genome-wide association studies (GWAS have identified many loci associated with body mass index (BMI in many different populations. Variants in the FTO locus are reported to be one of the strongest genetic predictors of obesity. Recent publications pointed also to a topologically associated domain (TAD which is identified as a novel region affecting BMI. The TAD area encompasses the IRXB cluster (IRX3, IRX5, IRX6, FTO and RPGRIP1L genes.In this study, we investigated the relationship between variation of the FTO and IRX genes and obesity in Poles. We presented a case-control association analysis (normal versus overweight and/or obesity group of Polish adult individuals (N = 5418. We determined whether or not the chromosomal region 16:53 500 000-55 500 000 contains polymorphic variants which are correlated with BMI in Polish population, including sex and age stratified analysis.The obtained results showed that the problem of weight-height abnormalities differently affects populations of Polish women and men (χ2 = 187.1; p0.98, r2>0.80. We confirmed presence of the genetic susceptibility loci located in intron 1 of the FTO gene, which were correlated with BMI in our study group. For the first time, our analyses revealed strong association of FTO intronic variants (block 8 with overweight in group of men only. We have also identified association of the IRX region with overweight and/or obesity in Polish individuals.Our study demonstrated how tested SNPs make differential contributions to obesity and overweight risk. We revealed sex dependent differences in the distribution of tested loci which are associated with BMI in the population of Poles.

THE COMPETITIVENESS ASSESSMENT OF THE POLISH AND GERMAN SEA PORTS AT THE SOUTHERN BALTIC SEA USING THE MULTICRITERIA METHOD

Directory of Open Access Journals (Sweden)

Bohdan Pac

2016-09-01

Full Text Available The paper presents the results of the research conducted by the scientists of the Baltic Sea Logistics Research Centre in Gdansk Banking School. The aim of the research was to assess the competitiveness level of the indicated Polish and German sea ports at the Southern Baltic Sea on the base of their identified logistic capabilities. As the tool to make the assessment the Analitic Hierarchic Process (AHP method has been implemented. The sea port competitiveness has been directly referred to the total sea port logistic capabilities and presented as the number value. The research was focused on the logistics areas that is why it is difficult to take it as the interdisciplinary solution.

[Romanticism in German medicine in the light of home historiography of 1802-1945].

Science.gov (United States)

Plonka-Syroka, B

1998-01-01

The German non-materialist medicine of the first half of the 19th century is presently a subject of advanced historical studies, carried out in Europe and USA. Until the mid-20th century, however, it was only the German authors who produced literature dedicated to the above-mentioned medicine. The purpose of this study is to present to the Polish reader the main trends in the German medical historiography that have been taking up the subject for 150 years. The historians of German medicine distinguished trends in the post-war period as the studies of the history of their native medical historiography developed. A Polish historian taking up the task of characterizing of the main methodological trends in German medical historiography is faced with the necessity to take position on the findings of German authors who took up the above-mentioned subject earlier. In my studies I worked mainly on the findings of the following authors: Nelly Tsouyopoulos, Urban Wiesing and Hans-Uwe Lammel. They served me as a guide to the old historical-medical literature that I managed to reach in the libraries of Dresden and Leipzig. Some of the German studies (H. Haeser, J. Petersen) were translated to Polish language and in those cases I leaned on the Polish translators. In this study I discuss the following methodological trends in historiography of German medicine of the 1st half of the 19th century: eclectic trends, philosophical trends, positivistic trends, neo-romantic trends, and social-cultural trends. I also present the analysis of theories of the most important representatives of the trends. Thanks to this I could reconstruct the process of shaping of the discussed epoch image in the light of various concepts of its description. As a result different characteristics of the epoch were grasped although the factography level they referred to was common. This study outlines also further developoment of the historiography of the discussed subject in the second half of the 20th

Epidemiology of dizziness in northern Poland – The first Polish neurootologic survey of the general population

Directory of Open Access Journals (Sweden)

Romuald Wojtczak

2017-09-01

The authors present the first Polish neurootologic survey of epidemiology of dizziness in the general population. This condition is common in the general population, and this study indicates its prevalence in 16.4% of the inhabitants of the town and district of Bytów. It is recommendable that epidemiological studies should be carried out.

Regular and problematic leisure-time Internet use in the community: results from a German population-based survey

OpenAIRE

Beutel, ME; Brähler, E; Glaesmer, H; Kuss, DJ; Wölfling, K; Müller, KW

2011-01-01

In our study, we attempted to identify systematically the use of Internet applications in the German population in order to derive risk factors for problematic use. In a representative survey of the German population, we queried 1,401 women and 1,111 men between the ages of 14 and 94 years by specific questions and standardized questionnaires on depression, anxiety (HADS), and depersonalization (CDS-2). The majority of the German population (55%) used the Internet in their leisure time. Users...

The Use of Genetic Mechanisms and Behavioral Characteristics to Control Natural Populations of the German Cockroach.

Science.gov (United States)

1981-03-01

release of sterile males into natural populations of the German cockroach. Submitted to Entomologia exp. & Appl. Feb., 1981. A first draft was...populations of the German cockroach. Subm. Entomologia Exp. & Appl. Feb., 1981. aEight other publications of earlier research on this Contract have

Individual-based assessment of population structure and admixture in Austrian, Croatian and German draught horses.

Science.gov (United States)

Druml, T; Curik, I; Baumung, R; Aberle, K; Distl, O; Sölkner, J

2007-02-01

All over Europe, the number of draught horses has decreased drastically during the last 50 years. As a prerequisite for efficient management decisions, we analysed the conservation status in Austrian (Noriker Carinthia - NC, Noriker Salzburg - NS), Croatian (Croatian Coldblood - C, Posavina horse - P) and German (Altmaerkisch Coldblood - A, Black Forest horse - BF, Mecklenburg Coldblood - M, Rhenish German Draught horse - R, Saxon Thuringa Coldblood - ST, Schleswig Draught horse - Sch, South German Coldblood - SG) draught horses (434) using multilocus genotypic information from 30 (effectively 27) microsatellite loci. Populations located in areas with less intensive agricultural production (C, NC, NS, P and SG) had greater diversity within the population and estimated effective population size than A, BF, Sch, M, R and ST populations. The PCA plots revealed that populations form five separate groups. The 'Noriker' group (NC, NS and SG) and the 'Rhenish' group (A, M, R and ST) were the most distinctive (pairwise F(ST) values ranged from 0.078 to 0.094). The 'Croatian' group (C and P) was in the centre, while the BF and Sch populations formed two out-groups. A posterior Bayesian analysis detected further differentiation, mainly caused by political and geographical factors. Thus, it was possible to separate the South German Coldblood from the Austrian Noriker population where no subpopulation structure was detected. The admixture analysis revealed imprecise classification between C and P populations. A small but notable separation of R from A, M and ST populations was detected, while Sch and BF populations remained as out-groups. The information obtained should aid in making efficient conservation decisions.

The German Version of the Dutch Eating Behavior Questionnaire: Psychometric Properties, Measurement Invariance, and Population-Based Norms.

Science.gov (United States)

Nagl, Michaela; Hilbert, Anja; de Zwaan, Martina; Braehler, Elmar; Kersting, Anette

The Dutch Eating Behavior Questionnaire is an internationally widely used instrument assessing different eating styles that may contribute to weight gain and overweight: emotional eating, external eating, and restraint. This study aimed to evaluate the psychometric properties of the 30-item German version of the DEBQ including its measurement invariance across gender, age, and BMI-status in a representative German population sample. Furthermore, we examined the distribution of eating styles in the general population and provide population-based norms for DEBQ scales. A representative sample of the German general population (N = 2513, age ≥ 14 years) was assessed with the German version of the DEBQ along with information on sociodemographic characteristics and body weight and height. The German version of the DEQB demonstrates good item characteristics and reliability (restraint: α = .92, emotional eating: α = .94, external eating: α = .89). The 3-factor structure of the DEBQ could be replicated in exploratory and confirmatory factor analyses and results of multi-group confirmatory factor analyses supported its metric and scalar measurement invariance across gender, age, and BMI-status. External eating was the most prevalent eating style in the German general population. Women scored higher on emotional and restrained eating scales than men, and overweight individuals scored higher in all three eating styles compared to normal weight individuals. Small differences across age were found for external eating. Norms were provided according to gender, age, and BMI-status. Our findings suggest that the German version of the DEBQ has good reliability and construct validity, and is suitable to reliably measure eating styles across age, gender, and BMI-status. Furthermore, the results demonstrate a considerable variation of eating styles across gender and BMI-status.

Association study of folate-related enzymes (MTHFR, MTR, MTRR genetic variants with non-obstructive male infertility in a Polish population

Directory of Open Access Journals (Sweden)

Mateusz Kurzawski

2015-03-01

Full Text Available Spermatogenesis is a process where an important contribution of genes involved in folate-mediated one-carbon metabolism is observed. The aim of the present study was to investigate the association between male infertility and the MTHFR (677C > T; 1298A > C, MTR (2756A > G and MTRR (66A > G polymorphisms in a Polish population. No significant differences in genotype or allele frequencies were detected between the groups of 284 infertile men and of 352 fertile controls. These results demonstrate that common polymorphisms in folate pathway genes are not major risk factors for non-obstructive male infertility in the Polish population.

The level of health education in the Polish population.

Science.gov (United States)

Olszanecka-Glinianowicz, Magdalena; Chudek, Jerzy

2013-01-01

The study assessed factors influencing awareness of Poles concerning lifestyle factors that affect development of obesity, type 2 diabetes and cardiovascular diseases (CVD). A questionnaire survey covering awareness of lifestyle factors performed by general practitioners in 37,557 unselected patients. 96.1% of respondents believed that lifestyle has an impact on the occurrence of CVDs, especially: tobacco smoking (91.4%), excessive intake of fat (81.3%), alcohol (67.5%), salt (64.9%), and stress (64.9%). 79.0% respondents believed the smoking cessation, 77.5% weight loss and 66.8% healthy diet are most important to prevent diseases. Additionally, the belief in the need for an early weight reduction decreased with increasing BMI (82.9% with normal weight vs. 77.5% overweight and 70.4% obese). The most common source of health education was a physician (75.8%), the mass media, such as television and the press (62.0% and 64.8%, respectively), less often were educational materials (37.8%) and books (20.3 %), the Internet (3.8%) and radio (0.8%). Younger respondents presented a higher level of awareness about all analysed aspects of healthy lifestyle. The multiple regression analysis revealed that low education level and rural residence are the most important factors decreasing awareness of the lifestyle effect on health. 1. The level of knowledge about non-pharmacological methods of preventing lifestyle diseases in the Polish population is high except of the role of physical activity and daily vegetables consumption. This, however, has no impact on reducing the percentage of overweight and obese people and on increasing the tendency to pursue lifestyle changes. 2. Frustrating is the fact that more than one fifth of the study population is unaware that excessive weight reduction prevents development of cardiovascular diseases. Moreover, the convince to early weight decreases with increasing BMI. 3. The highest level of the knowledge among younger subjects reflect

The Frequency of c.550delA Mutation of the CANP3 Gene in the Polish LGMD2A Population.

Science.gov (United States)

Dorobek, Małgorzata; Ryniewicz, Barbara; Kabzińska, Dagmara; Fidziańska, Anna; Styczyńska, Maria; Hausmanowa-Petrusewicz, Irena

2015-11-01

Limb girdle muscular dystrophy 2A (LGMD2A) is the most frequent LGMD variant in the European population, representing about 40% of LGMD. The c.550delA mutation in the CANP3 (calcium activated neutral protease 3) gene is the most commonly reported mutation in LGMD2A. Prevalence of this mutation in the Polish population has not been previously investigated. The aim of this study was to identify and estimate the frequency of the c.550delA mutation in Polish LGMD2A patients. Polymerase chain reaction-sequencing analysis, restriction fragment length polymorphism polymerase chain reaction method. We analyzed 76 families affected with LGMD and identified 62 probands with mutations in the CANP3 gene. C.550delA was the most common mutation identified, being found in 78% of the LGMD2A families. The remaining mutations observed multiple times were as follows: c.598-612del15ntd; c.2242C>T; c.418dupC; c.1356insT, listed in terms of decreasing frequency. Two novel variants in the CANP3 gene, that is, c.700G>A Gly234Arg and c.661G>A Gly221Ser were also characterized. Overall, mutations in the LGMD2A gene were estimated to be present in 81% of patients with the LGMD phenotype who were without sarcoglycans and dysferlin deficiency on immunocytochemical analysis. The frequency of the heterozygous c.550delA mutation in the healthy Polish population was estimated at 1/124. The c.550delA is the most frequent CANP3 mutation in the Polish population, thus sequencing of exon 4 of this gene could identify the majority of LGMD2A patients in Poland.

Assessment of substantia nigra echogenicity in German and Filipino populations using a portable ultrasound system.

Science.gov (United States)

Go, Criscely L; Frenzel, Antonia; Rosales, Raymond L; Lee, Lillian V; Benecke, Reiner; Dressler, Dirk; Walter, Uwe

2012-02-01

Transcranial sonography of the substantia nigra for diagnosing premotor stages of Parkinson disease has been attracting increasing interest. Standard reference values defining an abnormal increased echogenic size (hyperechogenicity) of the substantia nigra have been established in several populations using high-end stationary ultrasound systems. It is unknown whether a portable ultrasound system can be appropriately used and how the Filipino population would compare with the well-studied white population. We prospectively studied substantia nigra echogenic sizes and third ventricle widths in 71 healthy adult German participants and 30 age- and sex-matched Filipino participants using both a well-established stationary ultrasound system (in the German cohort) and a recently distributed portable ultrasound system (in both ethnic cohorts). Mean substantia nigra echogenic sizes, cutoff values defining abnormal hyperechogenicity, and intra-rater reliability were similar with both systems and in both ethnic cohorts studied. The Filipino and German participants did not differ with respect to the frequency of insufficient insonation conditions (each 3%) and substantia nigra hyperechogenicity (10% versus 9%; P = .80). However, third ventricle widths were smaller in the Filipino than the German participants (mean ± SD, 1.6 ± 1.1 versus 2.4 ± 1.0 mm; P = .004). The frequency of substantia nigra hyperechogenicity appears to be homogeneous in white and Asian populations. Screening for this feature may well be performed with a present-day portable ultrasound system.

Cancer mortality among immigrant populations in Ontario, 1969 through 1973.

OpenAIRE

Newman, A. M.; Spengler, R. F.

1984-01-01

Ontario is home to a sizeable, recently established immigrant population whose cancer mortality has until now remained unexamined. The province's six largest immigrant groups (British, Italian, German, Dutch, Polish and Soviet) were investigated to compare their cancer mortality experience with that prevailing in Ontario and in their countries of birth for the period 1969 through 1973. Standardized mortality ratios (SMRs) were computed from data from Statistics Canada and the World Health Org...

Serological and nested PCR survey to determine the occurrence of Chlamydia infections in the Polish cattle population.

Science.gov (United States)

Szymańska-Czerwińska, Monika; Niemczuk, Krzysztof; Galińska, Elżbieta Monika

2013-01-01

Chlamydia spp. is an obligate intracellular agent that causes chlamydiosis in animals and humans. The aim of the presented study was to investigate the prevalence of Chlamydia infection in the Polish cattle population, both asymptomatic and having reproductive disorders. The study was performed on 4,475 serum samples collected from 16 Polish provinces at the turn of 2009-2011. The samples (3,419 from asymptomatic cattle and 1,056 from cattle with reproductive disorders) were tested by complement fixation test (CFT). Moreover, 160 and 201 samples of biological materials from both groups of cattle, respectively, were tested by nested PCR. The results obtained for two tested groups were compared by χ2 (ch-squared) test, both individually for each region (province), and generally for the whole country. The CFT results showed that the seroprevalence of Chlamydia spp. infections in the asymptomatic cattle population was 4.15%, while in the cattle with reproductive disorders--7.20%. There was a significant statistical difference between compared groups for whole country, but there were no significant differences for individual provinces. The results of PCR showed that Chlamydia spp. was present in both asymptomatic cattle and cattle having reproductive disorders. The nested PCR study confirmed the presence of Chlamydia abortus and Chlamydia suis in the tested samples. The presented study indicates that infections with Chlamydia spp. are present among Polish cattle, but the percentage of infected animals is not high.

Genetic similarities and differences between discoid and systemic lupus erythematosus patients within the Polish population.

Science.gov (United States)

Skonieczna, Katarzyna; Czajkowski, Rafał; Kaszewski, Sebastian; Gawrych, Mariusz; Jakubowska, Aneta; Grzybowski, Tomasz

2017-06-01

Many studies have shown that some SNPs might be a risk factor for systemic lupus erythematosus (SLE), but little is known about potential susceptibility loci of the skin types of the disease. Discoid lupus erythematosus (DLE) is the most common form of the cutaneous lupus erythematosus. Nevertheless, a genetic contribution to DLE is not fully recognized. We aimed to analyze three SNPs located in the STAT4 (rs7574865), ITGAM (rs1143679) and TNXB (rs1150754) genes in both DLE and SLE patients from Poland. SNPs were genotyped using real-time polymerase chain reaction (PCR). Statistical significance of the differences between patient and control groups in both allele and genotype frequencies were calculated using two tailed Fisher's exact test. The correction for multiple testing by the Bonferroni adjustment and odds ratio were also calculated. For the first time, we have shown that the polymorphisms located in the STAT4 (rs7574865), but not in the ITGAM (rs1143679) nor the TNXB (rs1150754) genes, might be associated with the development of DLE within the Polish population. The variation of the three investigated SNPs was found to be associated with SLE in our dataset. The results of our study suggest differences in the molecular background between DLE and SLE within the Polish population.

Smoking characteristics of Polish immigrants in Dublin.

LENUS (Irish Health Repository)

Kabir, Zubair

2008-01-01

BACKGROUND: This study examined two main hypotheses: a) Polish immigrants\\' smoking estimates are greater than their Irish counterparts (b) Polish immigrants purchasing cigarettes from Poland smoke "heavier" (>\\/= 20 cigarettes a day) when compared to those purchasing cigarettes from Ireland. The study also set out to identify significant predictors of \\'current\\' smoking (some days and everyday) among the Polish immigrants. METHODS: Dublin residents of Polish origin (n = 1,545) completed a previously validated Polish questionnaire in response to an advertisement in a local Polish lifestyle magazine over 5 weekends (July-August, 2007). The Office of Tobacco Control telephone-based monthly survey data were analyzed for the Irish population in Dublin for the same period (n = 484). RESULTS: Age-sex adjusted smoking estimates were: 47.6% (95% Confidence Interval [CI]: 47.3%; 48.0%) among the Poles and 27.8% (95% CI: 27.2%; 28.4%) among the general Irish population (p < 0.001). Of the 57% of smokers (n = 345\\/606) who purchased cigarettes solely from Poland and the 33% (n = 198\\/606) who purchased only from Ireland, 42.6% (n = 147\\/345) and 41.4% (n = 82\\/198) were "heavy" smokers, respectively (p = 0.79). Employment (Odds Ratio [OR]: 2.89; 95% CI: 1.25-6.69), lower education (OR: 3.76; 95%CI: 2.46-5.74), and a longer stay in Ireland (>24 months) were significant predictors of current smoking among the Poles. An objective validation of the self-reported smoking history of a randomly selected sub-sample immigrant group, using expired carbon monoxide (CO) measurements, showed a highly significant correlation coefficient (r = 0.64) of expired CO levels with the reported number of cigarettes consumed (p < 0.0001). CONCLUSION: Polish immigrants\\' smoking estimates are higher than their Irish counterparts, and particularly if employed, with only primary-level education, and are overseas >2 years.

Trends in mortality and biological stress in a medieval polish urban population.

Science.gov (United States)

Betsinger, Tracy K; DeWitte, Sharon

2017-12-01

Urbanization in pre-modern populations may have had a variety of consequences related to population crowding. However, research on the effects of urbanization have provided inconsistent results regarding the biological impact of this transition on human populations. The purpose of this study is to test the hypothesis that urbanization caused an increase in overall biological stress in a medieval (10th-13th centuries AD) Polish population. A human skeletal sample (n=164) was examined for the presence of porotic hyperostosis, cribra orbitalia, linear enamel hypoplasia, periosteal reaction, and specific infectious diseases. Prevalence rates were compared among three temporal samples: initial urbanization, early urbanization, and later urbanization. Results indicate no significant trends for any of the pathological conditions. Cox proportional hazards analyses, however, revealed a significant increase in the risk of death over time, which supports the hypothesis. These results reflect the necessity of using multiple analyses to address bioarchaeological questions. The lack of significant results from skeletal indicators may be due to an earlier urbanization trend in the population. This study illustrates that the association of urbanization with elevated biological stress is complicated and dependent on various factors, including culture and time period. Copyright © 2017 Elsevier Inc. All rights reserved.

Validation and reliability of the VF-14 questionnaire in a German population.

Science.gov (United States)

Chiang, Peggy Pei-Chia; Fenwick, Eva; Marella, Manjula; Finger, Robert; Lamoureux, Ecosse

2011-11-21

To evaluate the validity, reliability, and measurement characteristics of the Visual Function 14 (VF-14) in a German sample using Rasch analysis. This was a clinic-based, cross-sectional study with 184 patients with low vision recruited from an outpatient clinic at a German eye hospital. Participants underwent a clinical examination and completed the German VF-14 scale. The validity of the VF-14 scale was assessed using Rasch analysis. The main outcome measure was the overall functional score provided by the VF-14. After collapsing two response categories for items 13 and 14, the VF-14 scale satisfied fundamental criteria to achieve fit to the Rasch model, namely, ordered thresholds, the ability to distinguish between different strata of participant ability, absence of misfitting items, no evidence of unidimensionality, and no significant differential item functioning for key sociodemographic covariates. The VF-14 is able to discriminate between participants with different levels of vision impairment and across different cultural groups. The VF-14 is a valid, reliable, and unidimensional questionnaire for use in a German population. These findings contribute to the growing evidence base for second generation patient reported outcome measures in ophthalmology, and support the use of the German VF-14 in tertiary eye clinics in Germany to capture the impact of visual impairment on visual function from the patient's perspective and to inform low vision rehabilitation and interventions.

Long-Term Health-Related Quality of Life in German Patients with Juvenile Idiopathic Arthritis in Comparison to German General Population.

Directory of Open Access Journals (Sweden)

Swaantje Barth

Full Text Available Aims of the study were to investigate health-related quality of life (HRQOL in adult patients with former diagnosis of Juvenile Idiopathic Arthritis (JIA, to compare their HRQOL with the general population and to identify factors related to a poor outcome.In 2012, a cross-sectional survey was performed by mailing a questionnaire to a large cohort of former and current patients of the German Centre for Rheumatology in Children and Adolescents. Only adult patients (≥18 years with a diagnosis compatible with JIA were included (n = 2592; response 66%. The questionnaire included information about HRQOL (EQ5D, disease-related questions and socio-demographics. Prevalence and 95% confidence intervals (CI of problems with mobility, self-care, usual activities, pain and anxiety/depression were standardized to the German general population. Factors associated with low HRQOL in JIA patients were identified using logistic regression models.Sixty-two percent of the study population was female; age range was 18-73 years. In all dimensions, JIA patients reported statistically significantly more problems than the general population with largest differences in the pain dimension (JIA patients 56%; 95%CI 55-58%; general population 28%; 26-29% and the anxiety/depression dimension (28%; 27-29% vs. 4%; 4-5%. Lower HRQOL in JIA patients was associated with female sex, older age, lower level of education, still being under rheumatic treatment and disability.HRQOL in adult JIA patients is considerably lower than in the general population. As this cohort includes historic patients the new therapeutic schemes available today are expected to improve HRQOL in future.

Long-Term Health-Related Quality of Life in German Patients with Juvenile Idiopathic Arthritis in Comparison to German General Population.

Science.gov (United States)

Barth, Swaantje; Haas, Johannes-Peter; Schlichtiger, Jenny; Molz, Johannes; Bisdorff, Betty; Michels, Hartmut; Hügle, Boris; Radon, Katja

2016-01-01

Aims of the study were to investigate health-related quality of life (HRQOL) in adult patients with former diagnosis of Juvenile Idiopathic Arthritis (JIA), to compare their HRQOL with the general population and to identify factors related to a poor outcome. In 2012, a cross-sectional survey was performed by mailing a questionnaire to a large cohort of former and current patients of the German Centre for Rheumatology in Children and Adolescents. Only adult patients (≥18 years) with a diagnosis compatible with JIA were included (n = 2592; response 66%). The questionnaire included information about HRQOL (EQ5D), disease-related questions and socio-demographics. Prevalence and 95% confidence intervals (CI) of problems with mobility, self-care, usual activities, pain and anxiety/depression were standardized to the German general population. Factors associated with low HRQOL in JIA patients were identified using logistic regression models. Sixty-two percent of the study population was female; age range was 18-73 years. In all dimensions, JIA patients reported statistically significantly more problems than the general population with largest differences in the pain dimension (JIA patients 56%; 95%CI 55-58%; general population 28%; 26-29%) and the anxiety/depression dimension (28%; 27-29% vs. 4%; 4-5%). Lower HRQOL in JIA patients was associated with female sex, older age, lower level of education, still being under rheumatic treatment and disability. HRQOL in adult JIA patients is considerably lower than in the general population. As this cohort includes historic patients the new therapeutic schemes available today are expected to improve HRQOL in future.

Genetic similarities and differences between discoid and systemic lupus erythematosus patients within the Polish population

Directory of Open Access Journals (Sweden)

Katarzyna Skonieczna

2017-05-01

Full Text Available Introduction: Many studies have shown that some SNPs might be a risk factor for systemic lupus erythematosus (SLE, but little is known about potential susceptibility loci of the skin types of the disease. Discoid lupus erythematosus (DLE is the most common form of the cutaneous lupus erythematosus. Nevertheless, a genetic contribution to DLE is not fully recognized. Aim: We aimed to analyze three SNPs located in the STAT4 (rs7574865, ITGAM (rs1143679 and TNXB (rs1150754 genes in both DLE and SLE patients from Poland. Material and methods: SNPs were genotyped using real-time polymerase chain reaction (PCR. Statistical significance of the differences between patient and control groups in both allele and genotype frequencies were calculated using two tailed Fisher’s exact test. The correction for multiple testing by the Bonferroni adjustment and odds ratio were also calculated. Results : For the first time, we have shown that the polymorphisms located in the STAT4 (rs7574865, but not in the ITGAM (rs1143679 nor the TNXB (rs1150754 genes, might be associated with the development of DLE within the Polish population. The variation of the three investigated SNPs was found to be associated with SLE in our dataset. Conclusions : The results of our study suggest differences in the molecular background between DLE and SLE within the Polish population.

Prevalence and correlates of night eating in the German general population.

Directory of Open Access Journals (Sweden)

Martina de Zwaan

Full Text Available Recently, night eating syndrome (NES was included into the DSM-5 as an example of "Other Specified Feeding and Eating Disorders." The study provides insight into the population prevalence of NES using a large representative German population sample (n = 2,460 with a wide age range (14-85 years. The prevalence of NES was 1.1% using a cut-off on the Night Eating Questionnaire (NEQ of 25. A positive screening for NES was positively associated with depression and anxiety, eating disorder psychopathology, and body weight.

Family studies of somatic and functional characteristics in the polish rural population

Directory of Open Access Journals (Sweden)

T Wieczorek

2010-09-01

Full Text Available In the present investigation we were trying to determine the genetic and environmental conditioning of the chosen somatic and functional traits in Polish rural population during ontogenesis. In order to find out interactions between environmental and genetic conditions of the studied traits, classical methods of quantitative features were applied: correlation coefficients corrected by assortative mating in the chosen types of heritability were evaluated on their base, heritability coefficients of analyzed features were assessed. The biggest stability of the correlation coefficients was observed for the length-parameters. We did not noticed stronger genetic control of functional features in men. Mean-strong genetic control among analyzed traits was observed in: reaction time, space orientation and static strength expressed as relative and absolute strength.

Polish-Bulgarian-Russian, Bulgarian-Polish-Russian or Russian-Bulgarian-Polish dictionary?

Directory of Open Access Journals (Sweden)

Violetta Koseska-Toszewa

2015-11-01

Full Text Available Polish-Bulgarian-Russian, Bulgarian-Polish-Russian or Russian-Bulgarian-Polish dictionary? The trilingual dictionary (M. Duszkin, V. Koseska, J. Satoła and A. Tzoneva is being elaborated based on a working Polish-Bulgarian-Russian electronic parallel corpus authored by Maksim Duszkin, Violetta Koseska-Toszewa and Joanna Satoła-Staśkowiak, and works by A. Tzoneva. It is the first corpus comparing languages belonging to three different Slavic language groups: western, southern and eastern. Works on the dictionary are based on Gramatyka konfrontatywna bułgarsko-polska (Bulgarian-Polish confrontative grammar and the proposed there semantic-oriented interlanguage. Two types of classifiers have been introduced into the dictionary: classic and semantic. The trilingual dictionary will present a consistent and homogeneous set of facts of grammar and semantics. The Authors point out that in a traditional dictionary it is not clear for example whether aspect should be understood as imperfective / perfective form of a verb or as its meaning. Therefore in the dictionary forms and meaning are separated in a regular way. Imperfective verb form has two meanings: state and configuration of states and events culminating in state. Also perfective verb form has two meanings: event and configuration of states and events culminating in event. These meanings are described by the semantic classifiers, respectively, state and event, state1 and event1. The way of describing language units, mentioned in the article, gives a possibility to present language material (Polish, Bulgarian, Russian in any required order, hence the article’s title.

Unexpected patterns of admixture in German populations of Aedes japonicus japonicus (Diptera: Culicidae underscore the importance of human intervention.

Directory of Open Access Journals (Sweden)

Dorothee E Zielke

Full Text Available The mosquito Aedes japonicus japonicus, originally restricted to temperate East Asia, is now widespread in North America and more recently has become established in Europe. To ascertain the putative number of separate introductions to Europe and examine patterns of expansion we analyzed the genetic makeup of Ae. j. japonicus populations from five cemeteries in North Rhine-Westphalia and Rhineland-Palatinate, two western German federal states, as well as of specimens from populations in Belgium, Switzerland, and Austria/Slovenia. To do so, we genotyped individual specimens at seven pre-existing polymorphic microsatellite loci and sequenced part of the nad4 mitochondrial locus. We found evidence of two different genotypic signatures associated with different nad4 mitochondrial haplotypes, indicating at least two genetically differentiated populations of Ae. j. japonicus in Europe (i.e. two distinct genotypes. Belgian, Swiss, and Austrian/Slovenian populations all share the same genotypic signature although they have become differentiated since isolation. Contrary to expectations, the German Ae. j. japonicus are not closely related to those in Belgium which are geographically nearest but are also highly inbred. German populations have a unique genotype but also evidence of mixing between the two genotypes. Also unexpectedly, the populations closest to the center of the German infestation had the highest levels of admixture indicating that separate introductions did not expand and merge but instead their expansion was driven by punctuated human-mediated transport. Critically, the resulting admixed populations have higher genetic diversity and appear invasive as indicated by their increased abundance and recent spread across western Germany.

Jewish problem in the Polish Communist Party

Directory of Open Access Journals (Sweden)

Cimek Henryk

2016-12-01

Full Text Available Jews accounted for approx. 8-10% of the population of the Second Republic and in the communist movement (Polish Communist Party and Polish Communist Youth Union the rate was approx, 30%, while in subsequent years it much fluctuated. The percentage of Jews was the highest in the authorities of the party and in the KZMP. This had a negative impact on the position of the KPP on many issues, especially in its relation to the Second Republic.

Prevalence of estrogen receptor alpha PvuII and XbaI polymorphism in population of Polish postmenopausal women.

Directory of Open Access Journals (Sweden)

Jozef Haczynski

2008-01-01

Full Text Available Numerous data indicate that polymorphism of estrogen receptor alpha (ERalpha may predict lipid levels, lipid response to hormone replacement therapy (HRT, myocardial infarction risk, bone fracture risk, bone mineral density (BMD and changes in BMD over time. In this study we aimed to evaluate distribution of ERalpha PvuII and XbaI genotypes in population of Polish postmenopausal women qualified to different protocols of HRT. Subject of the study were 64 consecutive postmenopausal women aged from 45 to 65 years (mean 56.6 assigned to HRT. ERalpha PvuII and XbaI polymorphism was determined by PCR-restriction fragment length polymorphism (RFLP. The absence of PvuII and XbaI restriction sites were indicated by "P" and "X" and presence by "p" and "x", respectively. PvuII genotype was distributed as follows: PP 17.2% (n=11, Pp 50% (n=32, pp 32.83% (n=21. Frequency of XbaI genotype was: XX 6.25% (n=4, Xx 34.4% (n=22, xx 59.4% (n=38. Four haplotypes with following frequencies were recognized: PX 17.3%, px 47.4%, Px 24.4% and pX 10.9%. Prevalence of estrogen receptor alpha PvuII and XbaI polymorphisms in Polish women is similar to previously studied population.

Association of five SNPs with human hair colour in the Polish population.

Science.gov (United States)

Siewierska-Górska, A; Sitek, A; Żądzińska, E; Bartosz, G; Strapagiel, D

2017-03-01

Twenty-two variants (single nucleotide polymorphisms - SNPs) of the genes involved in hair pigmentation (OCA2, HERC2, MC1R, SLC24A5, SLC45A2, TPCN2, TYR, TYRP1) were genotyped in a group of 186 Polish participants, representing a range of hair colours (45 red, 64 blond, 77 dark). A genotype-phenotype association analysis was performed. Using z-statistics we identified three variants highly associated with different hair colour categories (rs12913832:A>G in HERC2, rs1805007:T>C and rs1805008:C>T in MC1R). Two variants: rs1800401:C>T in OCA2 and rs16891982:C>G in SLC45A2 showed a high probability of a relation with hair colour, although that probability did not exceed the threshold of statistical significance after applying the Bonferroni correction. We created and validated mathematical logistic regression models in order to test the usefulness of the sets of polymorphisms for hair colour prediction in the Polish population. We subjected four models to stratified cross-validation. The first model consisted of three polymorphisms that proved to be important in the associative analysis. The second model included, apart from the mentioned polymorphisms, additionally rs16891982:C>G in SLC45A. The third model included, apart from the variants relevant in the associating analysis, rs1800401:C>T in OCA. The fourth model consisted of the set of polymorphisms from the first model supplemented with rs16891982:C>G in SLC45A and rs1800401:C>T in OCA. The validation of our models has shown that the inclusion of rs16891982:C>G in SLC45A and rs1800401:C>T in OCA increases the prediction of red hair in comparison with the algorithm including only rs12913832:A>G in HERC2, rs1805007:T>C and rs1805008:C>T in MC1R. The model consisting of all the five above-mentioned genetic variants has shown good prediction accuracies, expressed by the area under the curve (AUC) of the receiver operating characteristics: 0.84 for the red-haired, 0.82 for the dark-haired and 0.71 for the blond

Adaptation of the Tinnitus Handicap Inventory into Polish and its testing on a clinical population of tinnitus sufferers.

Science.gov (United States)

Skarzynski, Piotr H; Raj-Koziak, Danuta; J Rajchel, Joanna; Pilka, Adam; Wlodarczyk, Andrzej W; Skarzynski, Henryk

2017-10-01

To describe how the Tinnitus Handicap Inventory (THI) was translated into Polish (THI-POL) and to present psychometric data on how well it performed in a clinical population of tinnitus sufferers. The original version of THI was adapted into Polish. The reliability of THI-POL was investigated using test-retest, Cronbach's alpha, endorsement rate and item-total correlation. Construct validity and convergent validity were also assessed based on confirmatory factor analysis, inter-item correlation and Pearson product-moment correlations using subscale A (Tinnitus) of the Tinnitus and Hearing Survey (THS-POL); divergent validity was checked using subscale B (Hearing) of THS-POL. A group of 167 adults filled in THI-POL twice over their three-day hospitalisation period. Test-retest reliability for the total THI-POL scores was strong (r = 0.91). Cronbach's alpha coefficient for the total score was high (r = 0.95), confirming the questionnaire's stability. Confirmatory factor analysis (CFA) and inter-item correlation did not confirm the three-factor model. Convergent validity from the Tinnitus subscale of THS showed a positive strong (r = 0.75) correlation. Divergent validity showed only a moderate correlation. All analyses were statistically significant (p tinnitus handicap of Polish-speaking patients to be effectively assessed.

Population-based imaging and radiomics. Rational and perspective of the German National Cohort MRI study

International Nuclear Information System (INIS)

Schlett, C.L.; Weckbach, S.; Hendel, T.

2016-01-01

The MRI study within the German National Cohort, a large-scale, population-based, longitudinal study in Germany, comprises comprehensive characterization and phenotyping of a total of 30 000 participants using 3-Tesla whole-body MR imaging. A multi-centric study design was established together with dedicated core facilities for e.g. managing incidental findings or providing quality assurance. As such, the study represents a unique opportunity to substantially impact imaging-based risk stratification leading to personalized and precision medicine. Supported by the developments in the field of computational science, the newly developing scientific field of radiomics has large potential for the future. In the present article we provide an overview on population-based imaging and Radiomics and conceptualize the rationale and design of the MRI study within the German National Cohort.

[Criterion Validity of the German Version of the CES-D in the General Population].

Science.gov (United States)

Jahn, Rebecca; Baumgartner, Josef S; van den Nest, Miriam; Friedrich, Fabian; Alexandrowicz, Rainer W; Wancata, Johannes

2018-04-17

The "Center of Epidemiologic Studies - Depression scale" (CES-D) is a well-known screening tool for depression. Until now the criterion validity of the German version of the CES-D was not investigated in a sample of the adult general population. 508 study participants of the Austrian general population completed the CES-D. ICD-10 diagnoses were established by using the Schedules for Clinical Assessment in Neuropsychiatry (SCAN). Receiver Operating Characteristics (ROC) analysis was conducted. Possible gender differences were explored. Overall discriminating performance of the CES-D was sufficient (ROC-AUC 0,836). Using the traditional cut-off values of 15/16 and 21/22 respectively the sensitivity was 43.2 % and 32.4 %, respectively. The cut-off value developed on the basis of our sample was 9/10 with a sensitivity of 81.1 % und a specificity of 74.3 %. There were no significant gender differences. This is the first study investigating the criterion validity of the German version of the CES-D in the general population. The optimal cut-off values yielded sufficient sensitivity and specificity, comparable to the values of other screening tools. © Georg Thieme Verlag KG Stuttgart · New York.

The Factor Structure of the Polish-Language Version of the Romantic Beliefs Scale

Directory of Open Access Journals (Sweden)

Katarzyna Adamczyk

2014-07-01

Full Text Available The aim of the present study was to investigate the factor structure and psychometric properties of the Polish adaptation of Romantic Beliefs Scale (RBS; Sprecher & Metts, 1989. In a sample of 414 Polish university students aged 19-25 (227 females and 187 males, the factor structure of the original English version was confirmed for the four subscales: Love Finds a Way, One and Only, Idealization, and Love at First Sight. The present study provides evidence that the 15-item version of the Polish adaptation of the (RBS possesses a factor structure and psychometric properties comparable to the English-language version of RBS. It was shown to be a reliable self-report measure for romantic beliefs within a sample of the Polish population. The development of a new Polish measure of romantic beliefs has provided further validation for the RBS, and provided evidence in support of the ideology of romanticism in various populations, and indicated the importance of differentiating between the different types of romantic beliefs.

Long-Term Health-Related Quality of Life in German Patients with Juvenile Idiopathic Arthritis in Comparison to German General Population

OpenAIRE

Barth, Swaantje; Haas, Johannes-Peter; Schlichtiger, Jenny; Molz, Johannes; Bisdorff, Betty; Michels, Hartmut; Hügle, Boris; Radon, Katja

2016-01-01

Objective Aims of the study were to investigate health-related quality of life (HRQOL) in adult patients with former diagnosis of Juvenile Idiopathic Arthritis (JIA), to compare their HRQOL with the general population and to identify factors related to a poor outcome. Methods In 2012, a cross-sectional survey was performed by mailing a questionnaire to a large cohort of former and current patients of the German Centre for Rheumatology in Children and Adolescents. Only adult patients (?18 year...

Sexual Health of Polish Athletes with Disabilities

Directory of Open Access Journals (Sweden)

Ryszard Plinta

2015-06-01

Full Text Available The purpose of this study was to determine sexual functioning of Polish athletes with disabilities (including paralympians. The study encompassed 218 people with physical disabilities, aged between 18 and 45 (149 men and 69 women. The entire research population was divided into three groups: Polish paralympians (n = 45, athletes with disabilities (n = 126 and non-athletes with disabilities (n = 47. The quality of sexual life of Polish paralympians was measured by using the Polish version of Female Sexual Function Index and International Index of Erectile Function. Clinically significant erectile dysfunctions were most often diagnosed in non-athletes (83.33% with 50% result of severe erectile dysfunctions, followed by athletes and paralympians with comparable results of 56.98% and 54.17% respectively (p = 0.00388. Statistically significant clinical sexual dysfunctions concerned lubrication, orgasm as well as pain domains, and prevailed among female non-athletes (68.42%, 68.42% and 57.89%. Practising sports at the highest level has a favourable effect on the sexuality of men and women with physical disabilities. Men with physical disabilities manifest more sexual disorders than women, an aspect which should be considered by health-care professionals working with people with disabilities.

Validation of the German Diabetes Risk Score within a population-based representative cohort.

Science.gov (United States)

Hartwig, S; Kuss, O; Tiller, D; Greiser, K H; Schulze, M B; Dierkes, J; Werdan, K; Haerting, J; Kluttig, A

2013-09-01

To validate the German Diabetes Risk Score within the population-based cohort of the Cardiovascular Disease - Living and Ageing in Halle (CARLA) study. The sample included 582 women and 719 men, aged 45-83 years, who did not have diabetes at baseline. The individual risk of every participant was calculated using the German Diabetes Risk Score, which was modified for 4 years of follow-up. Predicted probabilities and observed outcomes were compared using Hosmer-Lemeshow goodness-of-fit tests and receiver-operator characteristic analyses. Changes in prediction power were investigated by expanding the German Diabetes Risk Score to include metabolic variables and by subgroup analyses. We found 58 cases of incident diabetes. The median 4-year probability of developing diabetes based on the German Diabetes Risk Score was 6.5%. The observed and predicted probabilities of developing diabetes were similar, although estimation was imprecise owing to the small number of cases, and the Hosmer-Lemeshow test returned a poor correlation (chi-squared = 55.3; P = 5.8*10⁻¹²). The area under the receiver-operator characteristic curve (AUC) was 0.70 (95% CI 0.64-0.77), and after excluding participants ≥66 years old, the AUC increased to 0.77 (95% CI 0.70-0.84). Consideration of glycaemic diagnostic variables, in addition to self-reported diabetes, reduced the AUC to 0.65 (95% CI 0.58-0.71). A new model that included the German Diabetes Risk Score and blood glucose concentration (AUC 0.81; 95% CI 0.76-0.86) or HbA(1c) concentration (AUC 0.84; 95% CI 0.80-0.91) was found to peform better. Application of the German Diabetes Risk Score in the CARLA cohort did not reproduce the findings in the European Prospective Investigation into Cancer and Nutrition (EPIC) Potsdam study, which may be explained by cohort differences and model overfit in the latter; however, a high score does provide an indication of increased risk of diabetes. © 2013 The Authors. Diabetic Medicine © 2013 Diabetes

The psychometric properties of the German version of the WHOQOL-OLD in the German population aged 60 and older.

Science.gov (United States)

Conrad, Ines; Matschinger, Herbert; Riedel-Heller, Steffi; von Gottberg, Carolin; Kilian, Reinhold

2014-09-05

The WHOQOL-OLD is an instrument for the assessment of subjective quality of life in elderly people. It is based on the WHO definition of quality of life and is available in more than 20 languages. However, in most countries, the psychometric properties of the WHOQOL-OLD have been assessed only on the basis of small local samples and not in representative studies. In this study, the psychometric properties of the WHOQOL-OLD are evaluated based on a representative sample of Germany's elderly population. Face-to-face interviews with 1133 respondents from the German population aged 60 years and older were conducted. Quality of life was assessed by means of the WHOQOL-BREF, the WHOQOL-OLD and the SF12. Moreover, the GDS, the DemTect and the IADL were applied for the assessment of depressive symptoms, cognitive capacities and capacity for carrying out daily activities. Psychometric properties of the WHOQOL-OLD were evaluated by means of classical and probabilistic test theory, confirmatory factor analysis and multivariate regression model. Cronbach's alpha was found to be above 0.85 for four and above .75 for two of the six facets of the WHOQOL-OLD. IRT analyses indicated that all items of the WHOQOL-OLD contribute considerably to the measurement of the associated facets. While the six-facet structure of the WHOQOL-OLD was well supported by the results of the confirmatory factor analysis, a common latent factor for the WHOQOL-OLD total scale could not be identified. Correlations with other quality of life measures and multivariate regression models with GDS, IADL and the DemTect indicate a good criterion validity of all six WHOQOL-OLD facets. Study results confirm that the good psychometric properties of the WHOQOL-OLD that have been found in international studies could be replicated in a representative study of the German population. These results suggest that the WHOQOL-OLD is an instrument that is well suited to identify the needs and the wishes of an aging population.

Is hypochondriasis a significant problem among polish adolescents? An attempt of assessment of severe form of health anxiety in polish population

Directory of Open Access Journals (Sweden)

Janusz Kocjan

2017-08-01

[Conclusions] The study provides evidence about moderate intensification of health anxiety among polish adolescent. Health anxiety level was significantly higher among medical students versus non-medical students group.

Cancer morbidity among polishers.

Science.gov (United States)

Järvholm, B; Thiringer, G; Axelson, O

1982-01-01

The mortality pattern among 86 men was determined to investigate the possible hazards of polishing steel. The men had polished steel with polishing paste for at least five years. The polishing pastes had contained tallow, beeswax, carnauba wax, alundum, carborundum, ferric oxide, and chalk. A total of 18 men had died compared with 13.3 expected. Four had died of stomach cancer compared with 0.44 expected (p less than 0.005). The mortality for other causes of death was not increased. The study does not permit any definite conclusion but indicates a possible cancer hazard among polishers. PMID:7066237

Validation of the German Diabetes Risk Score among the general adult population: findings from the German Health Interview and Examination Surveys

Science.gov (United States)

Paprott, Rebecca; Mühlenbruch, Kristin; Mensink, Gert B M; Thiele, Silke; Schulze, Matthias B; Scheidt-Nave, Christa; Heidemann, Christin

2016-01-01

Objective To evaluate the German Diabetes Risk Score (GDRS) among the general adult German population for prediction of incident type 2 diabetes and detection of prevalent undiagnosed diabetes. Methods The longitudinal sample for prediction of incident diagnosed type 2 diabetes included 3625 persons who participated both in the examination survey in 1997–1999 and the examination survey in 2008–2011. Incident diagnosed type 2 diabetes was defined as first-time physician diagnosis or antidiabetic medication during 5 years of follow-up excluding potential incident type 1 and gestational diabetes. The cross-sectional sample for detection of prevalent undiagnosed diabetes included 6048 participants without diagnosed diabetes of the examination survey in 2008–2011. Prevalent undiagnosed diabetes was defined as glycated haemoglobin ≥6.5% (48 mmol/mol). We assessed discrimination as area under the receiver operating characteristic curve (ROC-AUC (95% CI)) and calibration through calibration plots. Results In longitudinal analyses, 82 subjects with incident diagnosed type 2 diabetes were identified after 5 years of follow-up. For prediction of incident diagnosed diabetes, the GDRS yielded an ROC-AUC of 0.87 (0.83 to 0.90). Calibration plots indicated excellent prediction for low diabetes risk and overestimation for intermediate and high diabetes risk. When considering the entire follow-up period of 11.9 years (ROC-AUC: 0.84 (0.82 to 0.86)) and including incident undiagnosed diabetes (ROC-AUC: 0.81 (0.78 to 0.84)), discrimination decreased somewhat. A previously simplified paper version of the GDRS yielded a similar predictive ability (ROC-AUC: 0.86 (0.82 to 0.89)). In cross-sectional analyses, 128 subjects with undiagnosed diabetes were identified. For detection of prevalent undiagnosed diabetes, the ROC-AUC was 0.84 (0.81 to 0.86). Again, the simplified version yielded a similar result (ROC-AUC: 0.83 (0.80 to 0.86)). Conclusions The GDRS might be applied

Polishing large NaCl windows on a continuous polisher

International Nuclear Information System (INIS)

Williamson, R.

1979-01-01

The Helios and Antares CO 2 fusion laser systems incorporate numerous large sodium chloride windows. These must be refinished periodically, making necessary a consistent and predictable polishing capability. A continuous polisher (or annular lap) which might at Kirtland's Developmental Optical Facility. Large NaCl windows had not been polished on this type of machine. The machine has proven itself capable of producing lambda/16 figures at 633 nm (HeNe) with extremely smooth surfaces on glass. Since then, we have been working exclusively on NaCl optics. Due to different polishing parameters between NaCl and glass, and the slight solubility of the pitch in the slurry, this phase presents new problems. The work on glass will be reviewed. Results on NaCl to date will be reported. The potential of this type of machine relative to prisms, thin and irregularly shaped optics will be discussed

Differences in baseline lung cancer mortality between the German uranium miners cohort and the population of the former German Democratic Republic (1960-2003).

Science.gov (United States)

Walsh, Linda; Dufey, Florian; Möhner, Matthias; Schnelzer, Maria; Tschense, Annemarie; Kreuzer, Michaela

2011-03-01

A previous analysis of the radon-related lung cancer mortality risk, in the German uranium miners cohort, using Poisson modeling techniques, noted internal (spontaneous) rates that were higher on average than the external rates by 16.5% (95% CI: 9%; 24%). The main purpose of the present paper is to investigate the nature of, and possible reasons for, this difference by comparing patterns in spontaneous lung cancer mortality rates in a cohort of male miners involved in uranium extraction at the former Wismut mining company in East Germany with national male rates from the former German Democratic Republic. The analysis is based on miner data for 3,001 lung cancer deaths, 1.76 million person-years for the period 1960-2003, and national rates covering the same calendar-year range. Simple "age-period-cohort" graphical analyses were applied to assess the main qualitative differences between the national and cohort baseline lung cancer rates. Some differences were found to occur mainly at higher attained ages above 70 years. Although many occupational risk factors may have contributed to these observed age differences, only the effects of smoking have been assessed here by applying the Peto-Lopez indirect method for calculating smoking attributability. It is inferred that the observed age differences could be due to the greater prevalence of smoking and more mature smoking epidemic in the Wismut cohort compared to the general population of the former German Democratic Republic. In view of these observed differences between external population-based rates and internal (spontaneous) cohort baseline lung cancer rates, it is strongly recommended to apply only the internal rates in future analyses of uranium miner cohorts. © Springer-Verlag 2010

Convergent Polishing: A Simple, Rapid, Full Aperture Polishing Process of High Quality Optical Flats & Spheres

Science.gov (United States)

Suratwala, Tayyab; Steele, Rusty; Feit, Michael; Dylla-Spears, Rebecca; Desjardin, Richard; Mason, Dan; Wong, Lana; Geraghty, Paul; Miller, Phil; Shen, Nan

2014-01-01

Convergent Polishing is a novel polishing system and method for finishing flat and spherical glass optics in which a workpiece, independent of its initial shape (i.e., surface figure), will converge to final surface figure with excellent surface quality under a fixed, unchanging set of polishing parameters in a single polishing iteration. In contrast, conventional full aperture polishing methods require multiple, often long, iterative cycles involving polishing, metrology and process changes to achieve the desired surface figure. The Convergent Polishing process is based on the concept of workpiece-lap height mismatch resulting in pressure differential that decreases with removal and results in the workpiece converging to the shape of the lap. The successful implementation of the Convergent Polishing process is a result of the combination of a number of technologies to remove all sources of non-uniform spatial material removal (except for workpiece-lap mismatch) for surface figure convergence and to reduce the number of rogue particles in the system for low scratch densities and low roughness. The Convergent Polishing process has been demonstrated for the fabrication of both flats and spheres of various shapes, sizes, and aspect ratios on various glass materials. The practical impact is that high quality optical components can be fabricated more rapidly, more repeatedly, with less metrology, and with less labor, resulting in lower unit costs. In this study, the Convergent Polishing protocol is specifically described for fabricating 26.5 cm square fused silica flats from a fine ground surface to a polished ~λ/2 surface figure after polishing 4 hr per surface on a 81 cm diameter polisher. PMID:25489745

Health-related quality of life of prostate cancer patients compared to the general German population: age-specific results.

Science.gov (United States)

Zenger, Markus; Hinz, Andreas; Stolzenburg, Jens-Uwe; Rabenalt, Robert; Schwalenberg, Thilo; Schwarz, Reinhold

2009-01-01

The objective of this study was to examine the age-specific health-related quality of life (HRQOL) of prostate cancer patients (PCPs). 387 PCPs were asked to self-assess their HRQOL with the EORTC QLQ-C30 questionnaire. Patients' data were compared with those of the general German population. The reported global health/QOL scores of the study group and the general German population are nearly equal. However, most of the subdomains of HRQOL are negatively affected in PCPs, especially in younger patients (

Nencki Affective Word List (NAWL): the cultural adaptation of the Berlin Affective Word List-Reloaded (BAWL-R) for Polish.

Science.gov (United States)

Riegel, Monika; Wierzba, Małgorzata; Wypych, Marek; Żurawski, Łukasz; Jednoróg, Katarzyna; Grabowska, Anna; Marchewka, Artur

2015-12-01

In the present article, we introduce the Nencki Affective Word List (NAWL), created in order to provide researchers with a database of 2,902 Polish words, including nouns, verbs, and adjectives, with ratings of emotional valence, arousal, and imageability. Measures of several objective psycholinguistic features of the words (frequency, grammatical class, and number of letters) are also controlled. The database is a Polish adaptation of the Berlin Affective Word List-Reloaded (BAWL-R; Võ et al., Behavior Research Methods 41:534-538, 2009), commonly used to investigate the affective properties of German words. Affective normative ratings were collected from 266 Polish participants (136 women and 130 men). The emotional ratings and psycholinguistic indexes provided by NAWL can be used by researchers to better control the verbal materials they apply and to adjust them to specific experimental questions or issues of interest. The NAWL is freely accessible to the scientific community for noncommercial use as supplementary material to this article.

Explanatory models of addictive behaviour among native German, Russian-German, and Turkish youth.

Science.gov (United States)

Penka, S; Heimann, H; Heinz, A; Schouler-Ocak, M

2008-01-01

In Germany, the public system of addiction treatment is used less by migrants with addictive disorders than by their non-migrant counterparts. To date, the literature has focused primarily on language, sociocultural factors, and residence status when discussing access barriers to this part of the health care system. However, little attention has been paid to cultural differences in explanatory models of addictive behaviour. This is surprising when we consider the important role played by popular knowledge in a population's perceptions of and responses to illnesses, including their causes, symptoms, and treatment. In the present study, we examined explanatory models of addictive behaviour and of mental disorders in 124 native German und Russian-German youth and compared these models to those observed in an earlier study of 144 German and Turkish youth. We employed the free listing technique German and to compile the terms that participating subjects used to describe addictive behaviour. Subsequently, we examined how a subset of our study population assigned these terms to the respective disorders by means of the pile sort method. Although the explanatory models used by the German and Russian-German youth in our study were surprisingly similar, those employed by Turkish youth did not make any fundamental distinction between illegal and legal drugs (e.g. alcohol and nicotine). German and Russian-German youth regarded eating disorders as "embarrassing" or "disgraceful", but Turkish youth did not. Unlike our German and Russian-German subjects, the Turkish youth did not classify eating disorders as being addictive in nature. Moreover, medical concepts crucial to a proper understanding of dependence disorders (e.g. the term "physical dependence") were characterised by almost half of our Turkish subjects as useless in describing addictions. These findings show that it is impossible to translate medical or everyday concepts of disease and treatment properly into a different

The prevalence of Nonsuicidal Self-Injury (NSSI in a representative sample of the German population

Directory of Open Access Journals (Sweden)

Paul L. Plener

2016-10-01

Full Text Available Abstract Background Non-suicidal self-injury (NSSI is a proposed new “condition for further study” in the DSM-5. To date no prevalence data has been available on this diagnostic entity from a representative sample of the general population. Methods A representative sample of the German population (N = 2509, mean age = 48.8 years, SD = 18.1, female 55.4 % completed the NSSI section of the German version of the Self-Injurious Thoughts and Behaviors Interview (SITBI-G. Results A history of NSSI at least once during lifetime was reported by 3.1 % of all participants, with higher lifetime prevalence rates in younger age groups. DSM-5 NSSI disorder criteria were met by 0.3 %. The most common function of NSSI was automatic negative reinforcement (e.g. to alleviate negative feelings. Conclusions To the best of our knowledge, this is the first study reporting rates for the proposed NSSI category in DSM-5 from a representative sample of the general population. In comparison to findings from community samples of adolescents, adults seem to have lower lifetime prevalence rates of NSSI, thus making it necessary to emphasize prevention and treatment efforts in younger age groups.

Functional Median Polish

KAUST Repository

Sun, Ying

2012-08-03

This article proposes functional median polish, an extension of univariate median polish, for one-way and two-way functional analysis of variance (ANOVA). The functional median polish estimates the functional grand effect and functional main factor effects based on functional medians in an additive functional ANOVA model assuming no interaction among factors. A functional rank test is used to assess whether the functional main factor effects are significant. The robustness of the functional median polish is demonstrated by comparing its performance with the traditional functional ANOVA fitted by means under different outlier models in simulation studies. The functional median polish is illustrated on various applications in climate science, including one-way and two-way ANOVA when functional data are either curves or images. Specifically, Canadian temperature data, U. S. precipitation observations and outputs of global and regional climate models are considered, which can facilitate the research on the close link between local climate and the occurrence or severity of some diseases and other threats to human health. © 2012 International Biometric Society.

POLYMORPHISM OF PROLACTIN RECEPTOR GENE (PRLR IN THE POLISH LANDRACE AND POLISH LARGE WHITE SWINE POPULATION AND REPRODUCTIVE TRAITS

Directory of Open Access Journals (Sweden)

AGATA ZIÓŁKOWSKA

2011-01-01

Full Text Available Prolactin receptor gene was found in pig chromosome 16, and it is one of the genes with a significant effect on reproduction traits in sows. The objective of the research was to determine polymorphism of the prolactin receptor gene in pigs of two maternal breeds: Polish Landrace and Polish Large White, as well as analyse relations between particular allelomorphic variants, and reproduction traits of examined sows. Two PRLR gene alleles, A and B, were isolated, they were obtained after AluI restriction gene digestion of the PCR product with the length of 163 bp; furthermore, three genotypes were identified: PRLRAA – 85, 59, 19 bp; PRLRAB – 104, 85, 59, 19 bp; PRLRBB – 104, 59 bp. We assessed 122 sows, in terms of their age at the first farrowing, as well as the sizes of the two subsequent litters. No statistically significant differences were found in the examined reproduction traits in sows with different allelomorphic relations, both within each breed and between breeds. Obtained results indicate that it is necessary to conduct further research on a larger animal group.

[Statement of the board of directors of the German Sociological Society on the population census].

Science.gov (United States)

1983-10-01

This statement concerning population censuses has been prepared at the request of the board of directors of the German Sociological Society in light of the controversy surrounding the 1983 census in the Federal Republic of Germany. It is suggested that sample surveys cannot replace a census, a census is indispensable as a data source for regional analyses and studies of small population groups, a census must be carried out in a way that preserves the confidentiality of data, and census data must be accessible to scientific research.

ANALYSIS OF ACTIVITY OF GERMAN S OCIETY OF PHOTOGRAMMETRY, REMOTE SENSING AND GEOINFORMATICS

OpenAIRE

Kresse Wolfgang

2014-01-01

DGPF is the German Society of Photogrammetry, Remote Sensing and Geoinformatics – established in 1909, with currently 800 people. The Society has 12 working committees to work on issues in the field of photogrammetry and remote sensing as well as geoinforatics. In international cooperation with societies of Austria and Switzerland joint congresses are organized every three years. Similar cooperation could arise between Polish Society of Photogrammetry and Remote Sensing and DGPF.

Functional Median Polish

KAUST Repository

Sun, Ying; Genton, Marc G.

2012-01-01

polish is demonstrated by comparing its performance with the traditional functional ANOVA fitted by means under different outlier models in simulation studies. The functional median polish is illustrated on various applications in climate science

Cross-cultural measurement invariance of the General Health Questionnaire-12 in a German and a Colombian population sample.

Science.gov (United States)

Romppel, Matthias; Hinz, Andreas; Finck, Carolyn; Young, Jeremy; Brähler, Elmar; Glaesmer, Heide

2017-12-01

While the General Health Questionnaire, 12-item version (GHQ-12) has been widely used in cross-cultural comparisons, rigorous tests of the measurement equivalence of different language versions are still lacking. Thus, our study aims at investigating configural, metric and scalar invariance across the German and the Spanish version of the GHQ-12 in two population samples. The GHQ-12 was applied in two large-scale population-based samples in Germany (N = 1,977) and Colombia (N = 1,500). To investigate measurement equivalence, confirmatory factor analyses were conducted in both samples. In the German sample mean GHQ-12 total scores were higher than in the Colombian sample. A one-factor model including response bias on the negatively worded items showed superior fit in the German and the Colombian sample; thus both versions of the GHQ-12 showed configural invariance. Factor loadings and intercepts were not equal across both samples; thus GHQ-12 showed no metric and scalar invariance. As both versions of the GHQ-12 did not show measurement equivalence, it is not recommendable to compare both measures and to conclude that mental distress is higher in the German sample, although we do not know if the differences are attributable to measurement problems or represent a real difference in mental distress. The study underlines the importance of measurement equivalence in cross-cultural comparisons. Copyright © 2017 John Wiley & Sons, Ltd.

Regular and problematic leisure-time Internet use in the community: results from a German population-based survey.

Science.gov (United States)

Beutel, Manfred E; Brähler, Elmar; Glaesmer, Heide; Kuss, Daria J; Wölfling, Klaus; Müller, Kai W

2011-05-01

In our study, we attempted to identify systematically the use of Internet applications in the German population in order to derive risk factors for problematic use. In a representative survey of the German population, we queried 1,401 women and 1,111 men between the ages of 14 and 94 years by specific questions and standardized questionnaires on depression, anxiety (HADS), and depersonalization (CDS-2). The majority of the German population (55%) used the Internet in their leisure time. Users were younger and had a higher socioeconomic status (education, employment, income). Leisure-time use included e-mail and information search, as well as shopping. Chatting, online communities, games and sex were domains of young, mostly male adults. Overall, 9.3% reported at least one negative consequence of Internet use, especially neglect of recreational activities and problems with family/partner, work or education, and health. Problematic use was associated with longer average daily online times, avoidance of negative emotions, preference for certain applications (gaming, gambling, online sex) and an increased rate of depersonalization. The extent of Internet use per se is not sufficient as an addiction criterion and other negative consequences; rather, specific adverse consequences need to be identified. If the Internet is used excessively to cope with negative affect states and alternative means of coping (e.g., social support, health-promoting behavior) are diminished, a vicious cycle may ensue with increasing stress and reliance on the reinforcing properties of certain online activities that may finally lead to addictive behavior.

Preliminary Validation of a German Version of the Sexual Complaints Screener for Women in a Female Population Sample.

Science.gov (United States)

Burri, Andrea; Porst, Hartmut

2018-06-01

To date, neither the original English nor any of the translated versions of the Sexual Complaints Screener for Women (SCS-W) have been tested for their psychometric properties. To evaluate the validity and utility of the German version of the SCS-W by assessing content, convergent, and discriminant validity. A population sample of 309 women (mean age = 26.9 years) completed the online survey and had matching data available on the SCS-W and the Female Sexual Function Index (FSFI). Spearman bivariate correlations between the SCS-W and FSFI domain scores and exploratory factor analysis with principal component analysis were conducted. Convergent validity was excellent for the domain of orgasm, good for satisfaction, dyspareunia, and the total questionnaire score, and acceptable for desire, lubrication, arousal, and vaginismus. Discriminant validity was present for all domains apart from arousal, lubrication, and vaginismus. Varimax rotation suggested an 8-factor model was the most robust. This brief screener seems suitable to provide a brief overview of female patients' sexual problems in a clinical setting. This is the 1st study to assess the psychometric properties of the German version of the SCS-W. However, available information on the psychometric properties of the German SCS-W was limited because the validity of the screener could not be counterchecked against a clinical diagnosis of female sexual dysfunction. Our results provide preliminary evidence of good validity of the German version of the SCS-W. Overall, the SCS-W can offer support for clinicians who are less familiar with sexual medicine and who might not routinely discuss sexual issues with their patients. Burri A, Porst H. Preliminary Validation of a German Version of the Sexual Complaints Screener for Women in a Female Population Sample. Sex Med 2018;6:123-130. Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.

The Profile of a Polish Mutual Fund Manager

Directory of Open Access Journals (Sweden)

Dariusz Filip

2018-05-01

Full Text Available Aim/purpose - The purpose of this paper is to identify the characteristics that are typical of mutual fund managers. Design/methodology/approach - The study concentrates on a set of socio-demographic data, such as: age, gender, education, experience, and professional qualifications of 336 portfolio managers. The applied research strategy relies on an analysis concerning a set of statistical metrics describing the population under examination. Findings - The average Polish fund manager is a 37-year-old man, a holder of a stock-broker or investment adviser license. He obtained the authorization from the Polish Financial Supervision Authority (KNF a few years after graduating from the Warsaw School of Economics (SGH. He has 11 years' experience in financial markets and 7 years' experience in the mutual fund industry. Research implications/limitations - The identification of managerial characteristics for the purpose of creating a profile of a Polish mutual fund manager will provide an important basis for further surveys and analyses aimed to evaluate the effectiveness of mutual funds. Originality/value/contribution - There are no investigations within the discussed area in Polish studies. Therefore, the identification of the characteristics that are typical of mutual fund managers will make a contribution to the finance literature.(original abstract

Health Information in Polish (polski)

Science.gov (United States)

... Tools You Are Here: Home → Multiple Languages → Polish (polski) URL of this page: https://medlineplus.gov/languages/polish.html Health Information in Polish (polski) To use the sharing features on this page, ...

Polish Cartographical Review

Directory of Open Access Journals (Sweden)

Nedjeljko Frančula

2017-07-01

Full Text Available The Polish Cartographical Review (PCR journal has been published in English four times a year since 2015. The journal is in open access and it is published by De Gruyter Open. It is edited by Polish scientists in collaboration with international experts.

Adaptation of the ORTHO-15 test to Polish women and men.

Science.gov (United States)

Brytek-Matera, Anna; Krupa, Magdalena; Poggiogalle, Eleonora; Donini, Lorenzo Maria

2014-03-01

There is a lack of Polish tools to measure behaviour related to orthorexia nervosa. The purpose of the present study was to validate the Polish version of the ORTHO-15 test. 341 women and 59 men (N = 400) were recruited, whose age ranged from 18 to 35 years. Mean age was 23.09 years (SD = 3.14) in women and 24.02 years (SD = 3.87) in men. The ORTHO-15 test and the EAT-26 test were used in the present study. Factor analysis (exploratory and confirmatory analysis) was used in the present study. Exploratory factor analysis performed on the initial 15 items from a random split half of the study group suggested a nine-item two-factor structure. Confirmatory factor analysis performed on the second randomly selected half of the study group supported this two-factor structure of the ORTHO-15 test. The Polish version of the ORTHO-15 test demonstrated an internal consistency (Cronbach's alpha) equal to 0.644. The Polish version of the ORTHO-15 test is a reliable and valuable instrument to assess obsessive attitudes related to healthy and proper nutrition in Polish female and male population.

Recurrent APC gene mutations in Polish FAP families

Directory of Open Access Journals (Sweden)

Pławski Andrzej

2007-12-01

Full Text Available Abstract The molecular diagnostics of genetically conditioned disorders is based on the identification of the mutations in the predisposing genes. Hereditary cancer disorders of the gastrointestinal tracts are caused by mutations of the tumour suppressor genes or the DNA repair genes. Occurrence of recurrent mutation allows improvement of molecular diagnostics. The mutation spectrum in the genes causing hereditary forms of colorectal cancers in the Polish population was previously described. In the present work an estimation of the frequency of the recurrent mutations of the APC gene was performed. Eight types of mutations occurred in 19.4% of our FAP families and these constitute 43% of all Polish diagnosed families.

Polish normalization of the Body Esteem Scale

Directory of Open Access Journals (Sweden)

Małgorzata Lipowska

2014-02-01

Full Text Available Background Physical attractiveness plays an important part in one’s social functioning. The interest in one’s own appearance have been documented as widespread among the female population, but over the recent years it is more and more often emphasized that concentrating on body appearance concerns men as well. Franzoi and Shields (1984 created the Body Esteem Scale which allows to qualify the subject’s attitude towards his or her own body. The aim of the study was to create a Polish version of the Body Esteem Scale along with the norms for age and sex clusters. Participants and procedure The normalization sample consisted of 4298 participants: 1865 women aged 16 to 80 (M = 29.92; SD = 12.85 and 2433 men aged 16 to 78 (M = 28.74; SD = 11.50. Education levels among the participants were also controlled for. In order to create a Polish version of the Body Esteem Scale, translation was adopted as the adaptation strategy. Like the original one, the Polish scale comprises 35 items grouped into three gender specific subscales. The subscales for women include Sexual Attractiveness, Weight Concern, and Physical Condition, whereas the body esteem of is examined with regards to Physical Attractiveness, Upper Body Strength, and Physical Condition. Results Reliability of subscales was high both for females (Cronbach’s alpha from 0.80 to 0.89 and males (Cronbach’s alpha from 0.85 to 0.88. The given coefficients of reliability cover the original division into subscales adopted by the authors of BES. Conclusions We confirmed high reliability of the Polish version of the Body Esteem Scale, thus we recommend it as a diagnostic tool. Created norms allowed to refer results obtained in the course of research carried out on people with various disorders (e.g. eating disorders or body dysmorphic disorder with population data for corresponding age brackets.

Slower nicotine metabolism among postmenopausal Polish smokers.

Science.gov (United States)

Kosmider, Leon; Delijewski, Marcin; Koszowski, Bartosz; Sobczak, Andrzej; Benowitz, Neal L; Goniewicz, Maciej L

2018-06-01

A non-invasive phenotypic indicator of the rate of nicotine metabolism is nicotine metabolite ratio (NMR) defined as a ratio of two major metabolites of nicotine - trans-3'-hydroxycotinine/cotinine. The rate of nicotine metabolism has important clinical implications for the likelihood of successful quitting with nicotine replacement therapy (NRT). We conducted a study to measure NMR among Polish smokers. In a cross-sectional study of 180 daily cigarette smokers (42% men; average age 34.6±13.0), we collected spot urine samples and measured trans-3'-hydroxycotinine (3-HC) and cotinine levels with LC-MS/MS method. We calculated NMR (molar ratio) and analyzed variations in NMR among groups of smokers. In the whole study group, an average NMR was 4.8 (IQR 3.4-7.3). The group of women below 51 years had significantly greater NMR compared to the rest of the population (6.4; IQR 4.1-8.8 vs. 4.3; IQR 2.8-6.4). No differences were found among group ages of male smokers. This is a first study to describe variations in nicotine metabolism among Polish smokers. Our findings indicate that young women metabolize nicotine faster than the rest of population. This finding is consistent with the known effects of estrogen to induce CYP2A6 activity. Young women may require higher doses of NRT or non-nicotine medications for most effective smoking cessation treatment. Copyright © 2017 Institute of Pharmacology, Polish Academy of Sciences. Published by Elsevier B.V. All rights reserved.

Primary progressive multiple sclerosis in the Polish population

Directory of Open Access Journals (Sweden)

Waldemar Brola

2017-03-01

Full Text Available Objectives: The aim of the study was the epidemiological analysis and evaluation of selected clinical and sociodemographic factors in Polish patients with primary progressive multiple sclerosis. Methods: The study included patients from 7 provinces in central and eastern Poland registered in the Registry of Patients with Multiple Sclerosis on 31 December 2016. The incidence of various forms of the disease was compared, and clinical, demographic and social disparities between relapsing-remitting and primary progressive multiple sclerosis were analysed. Results: Of 3,199 registered patients, 2,188 persons (66.2% had the relapsing-remitting form of multiple sclerosis, 774 (24.2% had the secondary progressive type and 307 (9.6% suffered from primary progressive disease. The first symptoms of primary progressive multiple sclerosis appeared almost 10 years later than in patients with the relapsing-remitting type (39.2 ± 11.4 vs. 29.8 ± 9.8. The period from the first symptoms to diagnosis was more than twice as long in patients with primary progressive multiple sclerosis (5.8 ± 3.4 as in those with relapsing-remitting disease (2.4 ± 1.6. The average degree of disability in the Expanded Disability Status Scale was similar and amounted to 3.2 ± 2.1 for relapsing-remitting and 3.6 ± 2.4 for primary progressive multiple sclerosis. The relapsing-remitting form was observed more often in women (2.4:1, and the primary progressive form appeared with equal frequency in both sexes (1:1. Disease-modifying treatment was received by 34% of patients with relapsing-remitting and in only 1.9% of patients with primary progressive multiple sclerosis. Conclusions: The primary progressive form affects approximately 10% of Polish patients with multiple sclerosis. The first symptoms appear at about 40 years of age with equal frequency in both sexes, and its diagnosis takes more than twice as much time as in the case of relapsing-remitting multiple

Health-Related Quality of Life of the General German Population in 2015: Results from the EQ-5D-5L.

Science.gov (United States)

Huber, Manuel B; Felix, Julia; Vogelmann, Martin; Leidl, Reiner

2017-04-16

The EQ-5D-5L is a widely used generic instrument to measure health-related quality of life. This study evaluates health perception in a representative sample of the general German population from 2015. To compare results over time, a component analysis technique was used that separates changes in the description and valuation of health states. The whole sample and also subgroups, stratified by sociodemographic parameters as well as disease affliction, were analyzed. In total, 2040 questionnaires (48.4% male, mean age 47.3 year) were included. The dimension with the lowest number of reported problems was self-care (93.0% without problems), and the dimension with the highest proportion of impairment was pain/discomfort (71.2% without problems). Some 64.3% of the study population were identified as problem-free. The visual analog scale (VAS) mean for all participants was 85.1. Low education was connected with significantly lower VAS scores, but the effect was small. Depression, heart disease, and diabetes had a strong significant negative effect on reported VAS means. Results were slightly better than those in a similar 2012 survey; the most important driver was the increase in the share of the study population that reported to be problem-free. In international comparisons, health perception of the general German population is relatively high and, compared with previous German studies, fairly stable over recent years. Elderly and sick people continue to report significant reductions in perceived health states.

Association study of interleukin-4 polymorphisms with paranoid schizophrenia in the Polish population: a critical approach.

Science.gov (United States)

Fila-Danilow, Anna; Kucia, Krzysztof; Kowalczyk, Malgorzata; Owczarek, Aleksander; Paul-Samojedny, Monika; Borkowska, Paulina; Suchanek, Renata; Kowalski, Jan

2012-08-01

Changes in immunological system are one of dysfunctions reported in schizophrenia. Some changes based on an imbalance between Th1 and Th2 cytokines results from cytokine gene polymorphisms. Interleukin-4 gene (IL4) is considered as a potential candidate gene in schizophrenia association studies. The aim of the current case-control study was to examine whether the -590C/T (rs2243250) and -33C/T (rs2070874) IL4 gene polymorphisms are implicated in paranoid schizophrenia development in the Polish population. Genotyping of polymorphisms was performed by using PCR-RFLP technique. The genotypes and alleles distribution of both SNPs were analysed in patients (n = 182) and healthy individuals constituted the control group (n = 215). The connection between some clinical variables and studied polymorphisms has been examined as well. We did not revealed any association between the -590C/T and -33C/T polymorphisms and paranoid schizophrenia. In case of both SNPs the homozygous TT genotype was extremely rare. Both polymorphic sites of the IL4 gene were found to be in a very strong linkage disequilibrium. However we did not identify a haplotype predispose to paranoid schizophrenia. No associations were also observed between the clinical course and psychopathology of the disease and the genotypes of both analysed polymorphisms. Our results suggest that the polymorphisms -590C/T in IL4 gene promoter region and -33C/T in the 5'-UTR are not involved in the pathophysiology of paranoid schizophrenia in Polish residents.

Chosen single nucleotide polymorphisms (SNPs) of enamel formation genes and dental caries in a population of Polish children.

Science.gov (United States)

Gerreth, Karolina; Zaorska, Katarzyna; Zabel, Maciej; Borysewicz-Lewicka, Maria; Nowicki, Michał

2017-09-01

It is increasingly emphasized that the influence of a host's factors in the etiology of dental caries are of most interest, particularly those concerned with genetic aspect. The aim of the study was to analyze the genotype and allele frequencies of single nucleotide polymorphisms (SNPs) in AMELX, AMBN, TUFT1, TFIP11, MMP20 and KLK4 genes and to prove their association with dental caries occurrence in a population of Polish children. The study was performed in 96 children (48 individuals with caries - "cases" and 48 free of this disease - "controls"), aged 20-42 months, chosen out of 262 individuals who had dental examination performed and attended 4 day nurseries located in Poznań (Poland). From both groups oral swab was collected for molecular evaluation. Eleven selected SNPs markers were genotyped by Sanger sequencing. Genotype and allele frequencies were calculated and a standard χ2 analysis was used to test for deviation from Hardy-Weinberg equilibrium. The association of genetic variations with caries susceptibility or resistance was assessed by the Fisher's exact test and p ≤ 0.05 was considered statistically significant. Five markers were significantly associated with caries incidence in children in the study: rs17878486 in AMELX (p caries occurrence in Polish children.

Polish Academy of Sciences Great Dictionary of Polish [Wielki słownik języka polskiego PAN

Directory of Open Access Journals (Sweden)

Piotr Žmigrodzki

2014-12-01

Full Text Available The paper describes a lexicographical project involving the development of the newest general dictionary of the Polish language: the Polish Academy of Sciences Great Dictionary of Polish [Wielki słownik języka polskiego PAN]. The project is coordinated by the Institute of Polish Language at the Polish Academy of Sciences and carried out in collaboration with linguists and lexicographers from several other Polish academic centres. The paper offers a brief description of the genesis of the project and the scope of information included in the dictionary, the organisation of work, the life of the dictionary on the Web as well as the plans for the future.

Polish Higher Education: Intersectoral Distinctiveness

Science.gov (United States)

Musial, Joanna

2014-01-01

This study analyzes degrees of differences between the private and public sectors of Polish higher education. It finds them to be strong: Polish private institutions function very differently from Polish public institutions and these differences correspond with those found in the literature on higher education elsewhere in the world. Polish…

Height loss with advancing age in a hospitalized population of Polish men and women: magnitude, pattern and associations with mortality

Directory of Open Access Journals (Sweden)

Chmielewski Piotr

2015-06-01

Full Text Available The connection between the rate of height loss in older people and their general health status has been well documented in the medical literature. Our study was aimed at furthering the characterization of this interrelationship in the context of health indices and mortality in a hospitalized population of Polish adults. Data were collated from a literature review and from a longitudinal study of aging carried out in the Polish population which followed 142 physically healthy inmates, including 68 men and 74 women, for at least 25 years from the age of 45 onwards. Moreover, cross-sectional data were available from 225 inmates, including 113 men and 112 women. These subjects were confined at the same hospital. ANOVA, t-test, and regression analysis were employed. The results indicate that the onset of height loss emerges in the fourth and five decade of life and there is a gradual acceleration of reduction of height at later stages of ontogeny in both sexes. Postmenopausal women experience a more rapid loss of height compared with men. The individuals who had higher rate of loss of height (≥3 cm/decade tend to be at greater risk of cardiovascular events and all-cause mortality. In conclusion, our findings suggest that a systematic assessment of the rate of loss of height can be useful for clinicians caring for elderly people because of its prognostic value in terms of morbidity and mortality.

Preliminary Validation of a German Version of the Sexual Complaints Screener for Women in a Female Population Sample

Directory of Open Access Journals (Sweden)

Andrea Burri, DrSc

2018-06-01

Full Text Available Background: To date, neither the original English nor any of the translated versions of the Sexual Complaints Screener for Women (SCS-W have been tested for their psychometric properties. Aim: To evaluate the validity and utility of the German version of the SCS-W by assessing content, convergent, and discriminant validity. Methods: A population sample of 309 women (mean age = 26.9 years completed the online survey and had matching data available on the SCS-W and the Female Sexual Function Index (FSFI. Spearman bivariate correlations between the SCS-W and FSFI domain scores and exploratory factor analysis with principal component analysis were conducted. Outcomes: Convergent validity was excellent for the domain of orgasm, good for satisfaction, dyspareunia, and the total questionnaire score, and acceptable for desire, lubrication, arousal, and vaginismus. Discriminant validity was present for all domains apart from arousal, lubrication, and vaginismus. Varimax rotation suggested an 8-factor model was the most robust. Clinical Implications: This brief screener seems suitable to provide a brief overview of female patients' sexual problems in a clinical setting. Strengths and Limitations: This is the 1st study to assess the psychometric properties of the German version of the SCS-W. However, available information on the psychometric properties of the German SCS-W was limited because the validity of the screener could not be counterchecked against a clinical diagnosis of female sexual dysfunction. Conclusion: Our results provide preliminary evidence of good validity of the German version of the SCS-W. Overall, the SCS-W can offer support for clinicians who are less familiar with sexual medicine and who might not routinely discuss sexual issues with their patients.Burri A, Porst H. Preliminary Validation of a German Version of the Sexual Complaints Screener for Women in a Female Population Sample. Sex Med 2018;6:123–130. Key Words: Female Sexual

Measuring negative attitudes towards overweight and obesity in the German population - psychometric properties and reference values for the German short version of the Fat Phobia Scale (FPS).

Science.gov (United States)

Stein, Janine; Luppa, Melanie; Ruzanska, Ulrike; Sikorski, Claudia; König, Hans-Helmut; Riedel-Heller, Steffi G

2014-01-01

Obesity is one of the leading public health problems worldwide. Obese individuals are often stigmatized and the psychosocial consequences of overweight and obesity are the subject of current research. To detect stigmatizing attitudes towards obese people, the Fat Phobia Scale (FPS) was developed in the USA in the early nineties. In addition, the 14-item short form of the FPS was constructed. The FPS belongs to the most commonly used instruments for measuring negative attitudes towards obese people because of its good psychometric properties. For the recently developed German short form of the FPS, however, the comprehensive investigation of the psychometric properties and the determination of reference values are still pending. Thus, the main objectives of this study were the evaluation of the psychometric quality of the scale as well as the calculation of reference values. The study was based on a representative survey in the German general population. A sample of 1,657 subjects (18-94 years) was assessed via structured telephone interviews including the 14-item German version of the FPS. Descriptive statistics and inference-statistical analyses were conducted. Reference values in terms of percentage ranks were calculated. Substantial evidence for the reliability and validity of the German short version of the FPS was found. This study, for the first time in Germany, provides age-specific reference values for the German short form of the FPS allowing the interpretation of individual test scores. Facing the far-reaching consequences of experienced stigmatization of obese individuals, these study results provide an important basis for further studies aiming at the investigation of negative attitudes towards overweight and obesity.

The German Adaptation and Standardization of the Personality Assessment Inventory (PAI).

Science.gov (United States)

Groves, Julia A; Engel, Rolf R

2007-02-01

We developed the German Adaptation of the Personality Assessment Inventory (PAI; Morey, 1991) under careful consideration of current adaptation literature and guidelines. The adaptation process included the translation of the 344 items into German, a back translation into English as well as the testing of the language equivalence using a bilingual sample. We then standardized the final German version of the PAI for the German population. We compared the American and German norm and reliability data. The observed differences in PAI scale means did not exceed 5 T scores. Internal consistency reliability showed a similar pattern in both language versions, although the German alpha coefficients were on average slightly lower than the American ones. Factor structure was similar in both versions. We discuss expectations about the German PAI and possible problems for its practical usefulness for the German-speaking population.

Surface Roughness and Gloss of Actual Composites as Polished With Different Polishing Systems.

Science.gov (United States)

Rodrigues-Junior, S A; Chemin, P; Piaia, P P; Ferracane, J L

2015-01-01

This in vitro study evaluated the effect of polishing with different polishing systems on the surface roughness and gloss of commercial composites. One hundred disk-shaped specimens (10 mm in diameter × 2 mm thick) were made with Filtek P-90, Filtek Z350 XT, Opallis, and Grandio. The specimens were manually finished with #400 sandpaper and polished by a single operator using three multistep systems (Superfix, Diamond Pro, and Sof-lex), one two-step system (Polidores DFL), and one one-step system (Enhance), following the manufacturer's instructions. The average surface roughness (μm) was measured with a surface profilometer (TR 200 Surface Roughness Tester), and gloss was measured using a small-area glossmeter (Novo-Curve, Rhopoint Instrumentation, East Sussex, UK). Data were analyzed by two-way analysis of variance and Tukey's test (α=0.05). Statistically significant differences in surface roughness were identified by varying the polishing systems (pGloss was influenced by the composites (pone-step system, Enhance, produced the lowest gloss for all composites. Surface roughness and gloss were affected by composites and polishing systems. The interaction between both also influenced these surface characteristics, meaning that a single polishing system will not behave similarly for all composites. The multistep systems produced higher gloss, while the one-step system produced the highest surface roughness and the lowest gloss of all.

What distinguishes weight loss maintainers of the German Weight Control Registry from the general population?

Science.gov (United States)

Feller, Silke; Müller, Astrid; Mayr, Andreas; Engeli, Stefan; Hilbert, Anja; de Zwaan, Martina

2015-05-01

Differences between successful long-term weight loss maintainers and the general population with regard to eating and weighing habits, non-normative eating behaviors, and eating-related and general psychopathological parameters are unknown. Self-identified weight loss maintainers from the German Weight Control Registry (GWCR, n = 494) were compared with a representative sample of the general German population (n = 2,129). The samples did not differ in current BMI. Using the same assessment instruments in both cohorts, a variety of eating-related and psychological variables were determined. The GWCR participants reported more self-weighing and higher eating frequency but less hot meal consumption and more eating-out-of-home. Binge eating, compensatory behaviors, and concerns about shape and weight were reported more often by successful weight loss maintainers. Scores of depression and worrying about health were slightly higher whereas severity of somatic symptoms was less pronounced in the GWCR participants. Overall, our data suggest that successful weight loss maintainers are characterized by more concerns about shape and weight, greater binge eating frequency, and higher use of compensatory behaviors. The latter suggests that weight loss maintenance might not only be achieved by healthy strategies but also by non-normative behaviors which might increase the vulnerability for weight regain. © 2015 The Obesity Society.

Prevalence and Correlates of Self-Harm in the German General Population.

Directory of Open Access Journals (Sweden)

Astrid Müller

Full Text Available The study aimed at evaluating the psychometric properties of the German version of the Self- Harm Inventory (SHI and examining the lifetime prevalence and correlates of self-harm in a representative German population sample (N = 2,507; age mean = 48.79, SD = 18.11; range 14 to 94 years; 55.5% women using the SHI. All participants answered the German SHI, the short form of the Barratt Impulsiveness Scale (BIS-15, the ultra-brief Patient Health Questionnaire for Depression and Anxiety (PHQ-4, and provided sociodemographic information. The one-factorial structure of the SHI was replicated using a confirmatory factor analysis. Internal consistency coefficients were sufficient and in line with previous studies. Almost half of the sample (49% acknowledged at least one self-harming behavior over the life-span, most frequently indirect forms of self-harm. The rate of participants who engaged in at least one SHI behavior was higher among men than women (51.6% vs. 46.9%, respectively, χ2 = 5.38, p = 0.020. Higher SHI scores were related to younger age, male gender, living alone, more symptoms of anxiety and depression (PHQ-4, higher impulsivity scores (BIS-15, and suffering from obesity grade 2. Women engaged more often in discreet forms of self-harm than men, e.g., preventing wounds from healing, exercising an injury, starving, and abusing laxatives. In terms of other indirect self-harming behaviors, men admitted more often driving recklessly, being promiscuous and losing a job on purpose, while women reported more frequently engaging in emotionally abusive relationships. With respect to direct self-harm, women were more likely to endorse suicide attempts and cutting, while men admitted more often head-banging. The findings suggest that self-harm constitutes a common problem. Future longitudinal studies are required to examine the natural course, sociodemographic and psychopathological risk factors, as well as possible time-trends of self

Prevalence and Correlates of Self-Harm in the German General Population.

Science.gov (United States)

Müller, Astrid; Claes, Laurence; Smits, Dirk; Brähler, Elmar; de Zwaan, Martina

2016-01-01

The study aimed at evaluating the psychometric properties of the German version of the Self- Harm Inventory (SHI) and examining the lifetime prevalence and correlates of self-harm in a representative German population sample (N = 2,507; age mean = 48.79, SD = 18.11; range 14 to 94 years; 55.5% women) using the SHI. All participants answered the German SHI, the short form of the Barratt Impulsiveness Scale (BIS-15), the ultra-brief Patient Health Questionnaire for Depression and Anxiety (PHQ-4), and provided sociodemographic information. The one-factorial structure of the SHI was replicated using a confirmatory factor analysis. Internal consistency coefficients were sufficient and in line with previous studies. Almost half of the sample (49%) acknowledged at least one self-harming behavior over the life-span, most frequently indirect forms of self-harm. The rate of participants who engaged in at least one SHI behavior was higher among men than women (51.6% vs. 46.9%, respectively, χ2 = 5.38, p = 0.020). Higher SHI scores were related to younger age, male gender, living alone, more symptoms of anxiety and depression (PHQ-4), higher impulsivity scores (BIS-15), and suffering from obesity grade 2. Women engaged more often in discreet forms of self-harm than men, e.g., preventing wounds from healing, exercising an injury, starving, and abusing laxatives. In terms of other indirect self-harming behaviors, men admitted more often driving recklessly, being promiscuous and losing a job on purpose, while women reported more frequently engaging in emotionally abusive relationships. With respect to direct self-harm, women were more likely to endorse suicide attempts and cutting, while men admitted more often head-banging. The findings suggest that self-harm constitutes a common problem. Future longitudinal studies are required to examine the natural course, sociodemographic and psychopathological risk factors, as well as possible time-trends of self-harming behaviors in more

Polish visit

CERN Document Server

2003-01-01

On 6 October, Professor Michal Kleiber, Polish Minister of Science and Chairman of the State Committee for Scientific Research, visited CERN and met both the current and designated Director General, Luciano Maiani and Robert Aymar. Professor Kleiber visited the CMS and ATLAS detector assembly halls, the underground cavern for ATLAS, and the LHC superconducting magnet string test hall. Michal Kleiber (left), Polish minister of science and Jan Krolikowski, scientist at Warsaw University and working for CMS, who shows the prototypes of the Muon Trigger board of CMS.

Attitudes of the German general population toward early diagnosis of dementia--results of a representative telephone survey.

Directory of Open Access Journals (Sweden)

Tobias Luck

Full Text Available BACKGROUND: Early detection of dementia has clearly improved. Even though none of the currently available treatments for the most common form of dementia, Alzheimer's dementia, promises a cure, early diagnosis provides several benefits for patients, caregivers, and health care systems. This study aimed to describe attitudes toward early diagnosis of dementia in the German general population. METHODS: A representative telephone survey of the German population aged 18+ years (n = 1,002 was conducted in 2011. RESULTS: The majority of respondents (69% would be willing to be examined for early diagnosis of dementia. Almost two thirds reported that they would prefer their general practitioner (GP as the first source of professional help. More than half of the respondents (55% stated their belief that dementia could be prevented. Respondents mostly indicated psychosocial prevention options. CONCLUSIONS: Our findings suggest that the general population in Germany is very open to early diagnosis of dementia; however, this seems connected with large expectations on the effectiveness of prevention options. Dementia awareness campaigns may be employed to carefully inform the public about the prevention options currently available and their efficacy. To exploit GPs' potential as a gatekeeper for early detection of dementia, their ability to identify patients with antecedent and mild stages of the disease must be improved.

Male suicide rates in German prisons and the role of citizenship.

Science.gov (United States)

Radeloff, Daniel; Lempp, Thomas; Kettner, Mattias; Rauf, Amna; Bennefeld-Kersten, Katharina; Freitag, Christine M

2017-01-01

Prisoners are at a particularly high risk of suicide. In contrast to other psychosocial risk factors it remains unclear to what degree the risk of suicide differs between prisoners with local citizenship and foreigners. In order to provide more detailed information for suicide prevention in prisons, this study aims to compare suicide rates (SR) between these populations in German criminal custody. Based on a German national database of completed suicide in custody, suicides by prisoners were analysed and compared with epidemiological data of the prison population and the general population, stratified for German and foreign citizenship. Data analysis was adjusted for differences in the age distribution of both populations by calculating standard mortality ratios (SMR) for suicide. SR were higher in prisoners with German citizenship than those with foreign citizenship (SR = 76.5 vs. SR = 42.8, Pcitizenship was comparable in juvenile and adult prisoners, indicating its relevance to both the juvenile and adult detention systems. Imprisonment is associated with a substantially increased risk of suicide in both German and non-German citizens, a finding which needs to be taken into consideration by the justice system. The lower suicide risk in non-German citizens is independent of whether or not they are in custody.

Male suicide rates in German prisons and the role of citizenship

Science.gov (United States)

Lempp, Thomas; Kettner, Mattias; Rauf, Amna; Bennefeld-Kersten, Katharina; Freitag, Christine M.

2017-01-01

Purpose Prisoners are at a particularly high risk of suicide. In contrast to other psychosocial risk factors it remains unclear to what degree the risk of suicide differs between prisoners with local citizenship and foreigners. In order to provide more detailed information for suicide prevention in prisons, this study aims to compare suicide rates (SR) between these populations in German criminal custody. Methods Based on a German national database of completed suicide in custody, suicides by prisoners were analysed and compared with epidemiological data of the prison population and the general population, stratified for German and foreign citizenship. Data analysis was adjusted for differences in the age distribution of both populations by calculating standard mortality ratios (SMR) for suicide. Results SR were higher in prisoners with German citizenship than those with foreign citizenship (SR = 76.5 vs. SR = 42.8, Pcitizenship was comparable in juvenile and adult prisoners, indicating its relevance to both the juvenile and adult detention systems. Conclusion Imprisonment is associated with a substantially increased risk of suicide in both German and non-German citizens, a finding which needs to be taken into consideration by the justice system. The lower suicide risk in non-German citizens is independent of whether or not they are in custody. PMID:28591187

Chemical mechanical glass polishing with cerium oxide: Effect of selected physico-chemical characteristics on polishing efficiency

Czech Academy of Sciences Publication Activity Database

Janoš, P.; Ederer, J.; Pilařová, V.; Henych, Jiří; Tolasz, Jakub; Milde, D.; Opletal, T.

2016-01-01

Roč. 362, SEP (2016), s. 114-120 ISSN 0043-1648 R&D Projects: GA MŠk(CZ) LM2015073 Institutional support: RVO:61388980 Keywords : Chemical mechanical polishing * Ceria-based polishing powders * Polishing efficienc Subject RIV: CA - Inorganic Chemistry Impact factor: 2.531, year: 2016

Male suicide rates in German prisons and the role of citizenship.

Directory of Open Access Journals (Sweden)

Daniel Radeloff

Full Text Available Prisoners are at a particularly high risk of suicide. In contrast to other psychosocial risk factors it remains unclear to what degree the risk of suicide differs between prisoners with local citizenship and foreigners. In order to provide more detailed information for suicide prevention in prisons, this study aims to compare suicide rates (SR between these populations in German criminal custody.Based on a German national database of completed suicide in custody, suicides by prisoners were analysed and compared with epidemiological data of the prison population and the general population, stratified for German and foreign citizenship. Data analysis was adjusted for differences in the age distribution of both populations by calculating standard mortality ratios (SMR for suicide.SR were higher in prisoners with German citizenship than those with foreign citizenship (SR = 76.5 vs. SR = 42.8, P<0.01. This association was not specific to the prison population, as the higher SR in citizens compared to non-citizens (SR = 19.3 vs. SR = 9.0, P<0.01 were also found in the general population. The association between prison suicide and citizenship was comparable in juvenile and adult prisoners, indicating its relevance to both the juvenile and adult detention systems.Imprisonment is associated with a substantially increased risk of suicide in both German and non-German citizens, a finding which needs to be taken into consideration by the justice system. The lower suicide risk in non-German citizens is independent of whether or not they are in custody.

A new view on dam lines in Polish Arabian horses based on mtDNA analysis

Directory of Open Access Journals (Sweden)

Sell Jerzy

2007-09-01

Full Text Available Abstract Polish Arabian horses are one of the oldest and the most important Arab populations in the world. The Polish Arabian Stud Book and the Genealogical Charts by Skorkowski are the main sources of information on the ancestors of Polish Arabs. Both publications were viewed as credible sources of information until the 1990s when the data regarding one of the dam lines was questioned. The aim of the current study was to check the accuracy of the pedigree data of Polish dam lines using mtDNA analysis. The analyses of a 458 bp mtDNA D-loop fragment from representatives of 15 Polish Arabian dam lines revealed 14 distinct haplotypes. The results were inconsistent with pedigree data in the case of two lines. A detailed analysis of the historical sources was performed to explain these discrepancies. Our study revealed that representatives of different lines shared the same haplotypes. We also noted a genetic identity between some lines founded by Polish mares of unknown origin and lines established by desert-bred mares.

Polish adaptation of Bad Sobernheim Stress Questionnaire-Brace and Bad Sobernheim Stress Questionnaire-Deformity.

Science.gov (United States)

Misterska, Ewa; Głowacki, Maciej; Harasymczuk, Jerzy

2009-12-01

Bad Sobernheim Stress Questionnaire-Brace and Bad Sobernheim Stress Questionnaire-Deformity are relatively new tools aimed at facilitating the evaluation of long-term results of therapy in persons with idiopathic scoliosis undergoing conservative treatment. To use these tools properly in Poland, they must be translated into Polish and adapted to the Polish cultural settings. The process of cultural adaptation of the questionnaires was compliant with the guidelines of International Quality of Life Assessment (IQOLA) Project. In the first stage, two independent translators converted the originals into Polish. Stage two, consisted of a comparison of the originals and two translated versions. During that stage, the team of two translators and authors of the project identified differences in those translations and created a combination of the two. In the third stage, two independent translators, who were native speakers of German, translated the adjusted version of the Polish translation into the language of the original document. At the last stage, a commission composed of: specialists in orthopedics, translators, a statistician and a psychologist reviewed all translations and drafted a pre-final version of the questionnaires. Thirty-five adolescent girls with idiopathic scoliosis who were treated with Cheneau brace were subjected to the questionnaire assessment. All patients were treated in an out-patient setting by a specialist in orthopedics at the Chair and Clinic of Orthopedics and Traumatology. Median age of patients was 14.8 SD 1.5, median value of the Cobb's angle was 27.8 degrees SD 7.4. 48.6% of patients had thoracic scoliosis, 31.4% had thoracolumbar scoliosis, and 20% patients had lumbar scoliosis. Median results obtained by means of the Polish version of BSSQ-Brace and BSSQ-Deformity questionnaires were 17.9 SD 5.0 and 11.3 SD 4.7, respectively. Internal consistency of BSSQ-Brace and BSSQ-Deformity was at the level of 0.80 and 0.87, whereas the value of

Measuring Negative Attitudes towards Overweight and Obesity in the German Population – Psychometric Properties and Reference Values for the German Short Version of the Fat Phobia Scale (FPS)

Science.gov (United States)

Stein, Janine; Luppa, Melanie; Ruzanska, Ulrike; Sikorski, Claudia; König, Hans-Helmut; Riedel-Heller, Steffi G.

2014-01-01

Objective Obesity is one of the leading public health problems worldwide. Obese individuals are often stigmatized and the psychosocial consequences of overweight and obesity are the subject of current research. To detect stigmatizing attitudes towards obese people, the Fat Phobia Scale (FPS) was developed in the USA in the early nineties. In addition, the 14-item short form of the FPS was constructed. The FPS belongs to the most commonly used instruments for measuring negative attitudes towards obese people because of its good psychometric properties. For the recently developed German short form of the FPS, however, the comprehensive investigation of the psychometric properties and the determination of reference values are still pending. Thus, the main objectives of this study were the evaluation of the psychometric quality of the scale as well as the calculation of reference values. Methods The study was based on a representative survey in the German general population. A sample of 1,657 subjects (18–94 years) was assessed via structured telephone interviews including the 14-item German version of the FPS. Descriptive statistics and inference-statistical analyses were conducted. Reference values in terms of percentage ranks were calculated. Results Substantial evidence for the reliability and validity of the German short version of the FPS was found. This study, for the first time in Germany, provides age-specific reference values for the German short form of the FPS allowing the interpretation of individual test scores. Conclusion Facing the far-reaching consequences of experienced stigmatization of obese individuals, these study results provide an important basis for further studies aiming at the investigation of negative attitudes towards overweight and obesity. PMID:25474195

Teatrul german din Cernăuţi (1803-1923

Directory of Open Access Journals (Sweden)

Alis Niculică

2005-11-01

Full Text Available Once with the occupation of Bucovina in 1774, the spreading of German culture was one of the many consequences. This was made through different ways, one of them, with a great impact, was the Theater. If at the beginning the theatre was promoted by various companies from the whole Empire, with the passing of the time, the theatrical institution becomes a reality when a special location was builded. From the most important companies which had performed at Chernovtsy (in most of the cases on improvised stages, we mention those leaded by Iosef Neuberg, Alois Heim, Alfred Hein, Franz Urbany, Constantin Loboiko, Lucian von Eysenbach, Gustav Sinnmayer, Jacques Kalvo, Louis Konderla. Only in 1878 has begun the construction of the building that would later be known as the Old Town Theatre, where local talents had the opportunity to affirm. The theatre had permanent seasons with a well chosen repertory. In 1905 a new building was constructed under the name of The New Town Theatre, being an architectural masterpiece of the architects Fellner and Helmer, where there were presented performances not only in German (performances that had biggest weight, but also in Polish, Romanian or Ukrainian. After the union between Bucovina and Romania in 1918, there were attempts of converting the German Theatre from Chernovtsy into National Theatre, this project being accomplished only at the beginning of the year 1923, as a result of some massive studentsstations. The presence of the German Theatre in Bucovina went a real progress for the Bucovinian culture, through her entering valuable literary works belonging to the German or universal literature.

Original article Validation of the Polish version of the Collective Self-Esteem Scale

Directory of Open Access Journals (Sweden)

Róża Bazińska

2015-07-01

Full Text Available Background The aim of this article is to present research on the validity and reliability of the Collective Self-Esteem Scale (CSES for the Polish population. The CSES is a measure of individual differences in collective self-esteem, understood as the global evaluation of one’s own social (collective identity. Participants and procedure Participants from two samples (n = 466 and n = 1,009 completed a paper-pencil set of questionnaires which contained the CSES and the Rosenberg Self-Esteem Scale (RSES, and subsets of participants completed scales related to a sense of belonging, well-being and psychological distress (anxiety and depression. Results Like the original version, the Polish version of the CSES comprises 16 items which form the four dimensions of collective self-esteem: Public collective self-esteem, Private collective self-esteem, Membership esteem and Importance of Identity. The results confirm the four-factor structure of the Polish version of the CSES, support the whole Polish version of the CSES as well as its subscales, which represent satisfactory reliability and stability, and provide initial evidence of construct validity. Conclusions As the results of the study indicate, the Polish version of the CSES is a valid and reliable self-report measure for assessing the global self-esteem derived from membership of a group and has proved to be useful in the Polish context.

Association between vitamin D concentration and levels of sex hormones in an elderly Polish population with different genotypes of VDR polymorphisms (rs10735810, rs1544410, rs7975232, rs731236).

Science.gov (United States)

Laczmanski, Lukasz; Lwow, Felicja; Mossakowska, Malgorzata; Puzianowska-Kuznicka, Monika; Szwed, Małgorzata; Kolackov, Katarzyna; Krzyzanowska-Swiniarska, Barbara; Bar-Andziak, Ewa; Chudek, Jerzy; Sloka, Natalia; Milewicz, Andrzej

2015-03-15

Vitamin D co-regulates the synthesis of sex hormones in part by interaction with its nuclear receptor. The aim of this study was to determine whether there is an association of vitamin D concentration vs the level of sex hormones in elderly Polish individuals with different genotypes of the vitamin D receptor (VDR) gene. Rs10735810, rs1544410, rs7975232, and rs731236 polymorphisms of VDR, the serum sex hormone level, free estrogen index (FEI) and free androgen index (FAI) as well as vitamin D, were evaluated in 766 persons (362 women and 404 men) selected from 5695 Polish population, aged 65-90years from the PolSenior survey. We observed that women with GG (rs731236), TT (rs7975232), BB (rs1544410) and FF (rs10735810) genotypes were characterized by a significant correlation between vitamin D vs testosterone concentration and FAI value. We found a significant correlation between testosterone level and FAI vs vitamin D concentration in men with heterozygote AG in the rs731236 polymorphism and in the GG (rs7975232), the BB (rs1544410), and the Ff (rs10735810) genotypes. In elderly selected Polish population with different genotypes of VDR polymorphisms, a statistically significant relationship between vitamin D concentration vs testosterone level was observed. Copyright © 2015 Elsevier B.V. All rights reserved.

Mental health differences between German gay and bisexual men and population-based controls.

Science.gov (United States)

Sattler, Frank A; Franke, Gabriele H; Christiansen, Hanna

2017-07-21

International studies have revealed that gay and bisexual men present more mental health problems than the general male population. Furthermore, there is evidence that minority stress predicts mental health problems in gay and bisexual men. The aim of the present study is to provide initial data on mental health differences in Germany and to analyze the effect of minority stress. Mental health data on n = 1903 German gay and bisexual men and n = 958 men from a population-based sample were assessed using a shortened version of the SCL-90-S. The mental health of the two samples was compared. Furthermore, a linear regression was conducted for the gay and bisexual sample: mental health was used as the criterion and minority stressors as predictors. As compared to our population sample, gay and bisexual men demonstrated more mental health problems with a moderate effect size. In the regression, minority stress predicted mental health problems in the gay and bisexual sample. We observed pronounced mental health differences between gay and bisexual men versus the population sample. These differences could be at least partly due to the minority stress gay and bisexual men face. Research should focus on how to reduce and cope with minority stress.

Association between C3435T polymorphism of MDR1 gene and the incidence of drug-resistant epilepsy in the population of Polish children.

Science.gov (United States)

Stasiołek, Mariusz; Romanowicz, Hanna; Połatyńska, Katarzyna; Chamielec, Maciej; Skalski, Dominik; Makowska, Marianna; Smolarz, Beata

2016-07-08

Epilepsy is a disease of neurological character. Approximately one third of epileptic patients demonstrate a drug-resistant phenotype, which is associated with the development of drug-resistant epilepsy. The multidrug resistance protein 1 and glycoprotein P, encoded by MDR1, play a significant role in the transmembrane transport of anti-epileptic agents. Single nucleotide polymorphism C3435T (rs1045642) within MDR1 gene may be associated with an increased expression of P-gp which affects the levels of antiepileptic drugs in plasma. The presented studies analysed the association between C3435T polymorphism of MDR1 gene and the incidence of drug-resistant epilepsy in the population of Polish children. C3435T polymorphism of MDR1 gene was analysed by the high resolution melting technique in a group of patients with drug-resistant (n = 106) and drug-responsive epilepsy (n = 67), as well as in non-epileptic children (n = 98) hospitalised at the Department of Neurology, Polish Mother's Memorial Hospital in Lodz. Genotype and allele distributions were evaluated and their compatibility with the Hardy-Weinberg distribution was assessed by means of the χ(2) test. Genotype and allele evaluation, regarding their relationship with a given feature, was supported by an analysis of odds ratio and 95 % confidence interval, calculated according to the logistic regression model. An association was observed between the incidence rate of DRE and the presence of C allele in C3435T polymorphism of MDR1 gene, which may enhance the risk of the disease. The T allele may then play a protective role. No differences were found in the studied groups, regarding either genotype or allele distribution in reference to patient's gender or concomitant diseases. Following the obtained results, C3435T polymorphism of MDR1 gene may be connected with the incidence of drug-resistant epilepsy in the population of Polish children. ISRCTN ISRCTN73824458. Registered 28th September 2014.

CFTR mutations spectrum and the efficiency of molecular diagnostics in Polish cystic fibrosis patients.

Directory of Open Access Journals (Sweden)

Ewa Ziętkiewicz

Full Text Available Cystic fibrosis (CF is caused by mutations in the cystic fibrosis transmembrane regulator gene (CFTR. In light of the strong allelic heterogeneity and regional specificity of the mutation spectrum, the strategy of molecular diagnostics and counseling in CF requires genetic tests to reflect the frequency profile characteristic for a given population. The goal of the study was to provide an updated comprehensive estimation of the distribution of CFTR mutations in Polish CF patients and to assess the effectiveness of INNOLiPA_CFTR tests in Polish population. The analyzed cohort consisted of 738 patients with the clinically confirmed CF diagnosis, prescreened for molecular defects using INNOLiPA_CFTR panels from Innogenetics. A combined efficiency of INNOLiPA CFTR_19 and CFTR_17_TnUpdate tests was 75.5%; both mutations were detected in 68.2%, and one mutation in 14.8% of the affected individuals. The group composed of all the patients with only one or with no mutation detected (109 and 126 individuals, respectively was analyzed further using a mutation screening approach, i.e. SSCP/HD (single strand conformational polymorphism/heteroduplex analysis of PCR products followed by sequencing of the coding sequence. As a result, 53 more mutations were found in 97 patients. The overall efficiency of the CF allele detection was 82.5% (7.0% increase compared to INNOLiPA tests alone. The distribution of the most frequent mutations in Poland was assessed. Most of the mutations repetitively found in Polish patients had been previously described in other European populations. The most frequent mutated allele, F508del, represented 54.5% of Polish CF chromosomes. Another eight mutations had frequencies over 1%, 24 had frequencies between 1 and 0.1%; c.2052-2053insA and c.3468+2_3468+3insT were the most frequent non-INNOLiPA mutations. Mutation distribution described herein is also relevant to the Polish diaspora. Our study also demonstrates that the reported

On the origin and diffusion of BRCA1 c.5266dupC (5382insC) in European populations

DEFF Research Database (Denmark)

Hamel, Nancy; Feng, Bing-Jian; Foretova, Lenka

2011-01-01

The BRCA1 mutation c.5266dupC was originally described as a founder mutation in the Ashkenazi Jewish (AJ) population. However, this mutation is also present at appreciable frequency in several European countries, which raises intriguing questions about the origins of the mutation. We genotyped 245...... carrier families from 14 different population groups (Russian, Latvian, Ukrainian, Czech, Slovak, Polish, Danish, Dutch, French, German, Italian, Greek, Brazilian and AJ) for seven microsatellite markers and confirmed that all mutation carriers share a common haplotype from a single founder individual.......5266dupC originated from a single common ancestor and was a common European mutation long before becoming an AJ founder mutation and (2) the mutation is likely present in many additional European countries where genetic screening of BRCA1 may not yet be common practice....

The tourism attractiveness of Polish libraries

OpenAIRE

Miedzińska, Magdalena; Tanaś, Sławoj

2009-01-01

The aim of the article is to draw the reader's attention to the tourism attractiveness of renowned Polish libraries. These have attained a tourism function due to tourism exploration and penetration, but remain in the shadow of other Polish cultural assets. The article outlines the historical geography of Polish libraries, an analysis of tourism assets and an attempt to classify and catalogue libraries in Poland.

Change of attitude and behaviour of the West-German population after the Chernobyl reactor accident

International Nuclear Information System (INIS)

Anders, H.J.; Rosenbauer, J.; Matiaske, B.

1987-01-01

As a result of the Chernobyl reactor accident, the West-German population has shown to be much more aware of the hazards emanating from environmental pollution and chemical or radioactive contamination of food. It could be observed that, on the whole, consumption of important basic food has been reduced, so that the population's supply with various, significant nutrients is expected to deteriorate. The nutrients to be mentioned in this context are primarily calcium, riboflavin, folic acid, and ascorbic acid. Investigations over the period May to July 1986 show that the reactor accident's impact on the food consumption behaviour subsides only slowly, and it remains to be seen to what extent changes and fluctuations in the population's nutritional behaviour will have to be taken as 'normal'. Hence some sort of nutritional deficiency can be expected among certain groups of the population, either temporarily or over a prolonged period. A National Survey of Food Consumption currently in preparation will yield more detailed insight into the whole process. (orig./MG) [de

Detection of paint polishing defects

Science.gov (United States)

Rebeggiani, S.; Wagner, M.; Mazal, J.; Rosén, B.-G.; Dahlén, M.

2018-06-01

Surface finish plays a major role on perceived product quality, and is the first thing a potential buyer sees. Today end-of-line repairs of the body of cars and trucks are inevitably to secure required surface quality. Defects that occur in the paint shop, like dust particles, are eliminated by manual sanding/polishing which lead to other types of defects when the last polishing step is not performed correctly or not fully completed. One of those defects is known as ‘polishing roses’ or holograms, which are incredibly hard to detect in artificial light but are clearly visible in sunlight. This paper will present the first tests with a measurement set-up newly developed to measure and analyse polishing roses. The results showed good correlations to human visual evaluations where repaired panels were estimated based on the defects’ intensity, severity and viewing angle.

Tooth polishing: The current status

Directory of Open Access Journals (Sweden)

Madhuri Alankar Sawai

2015-01-01

Full Text Available Healthy teeth and gums make a person feel confident and fit. As people go about their daily routines and with different eating and drinking habits, the tooth enamel turns yellowish or gets stained. Polishing traditionally has been associated with the prophylaxis procedure in most dental practices, which patients know and expect. However, with overzealous use of polishing procedure, there is wearing of the superficial tooth structure. This would lead to more accumulation of local deposits. Also, it takes a long time for the formation of the fluoride-rich layer of the tooth again. Hence, now-a-days, polishing is not advised as a part of routine oral prophylaxis procedure but is done selectively based on the patients′ need. The article here, gives an insight on the different aspects of the polishing process along with the different methods and agents used for the same.

Polish Industry and Art at CERN

CERN Multimedia

2000-01-01

On 17 October 2000 the second Polish industrial and technological exhibition opened at CERN. The first one was held five years ago and nine of the companies that were present then have come back again this year. Six of those companies were awarded contracts with CERN in 1995. Three Polish officials were present at the Opening Ceremony today: Mrs Malgorzata Kozlowska, Under-secretary of State in the State Committee for Scientific Research, Mr Henryk Ogryczak, Under-secretary of State in Ministry of Economy and Prof. Jerzy Niewodniczanski, President of National Atomic Energy Agency. Professor Luciano Maiani welcomed the Polish delegation to CERN and stressed the important contribution of Polish scientists and industrialists to the work of the laboratory. Director General Luciano Maiani (back left) and head of SPL division Karl-Heinz Kissler (back right) visit the Poland at CERN exhibition… The exhibition offers Polish companies the opportunity to establish professional contacts with CERN. Nineteen companies...

Polish polar research (outline

Directory of Open Access Journals (Sweden)

Krzysztof Ludwik Birkenmajer

2017-12-01

Full Text Available The article describes Polish research and discoveries in the Arctic and the Antarctic since the 19th century. The author is a geologist and since 1956 has been engaged in scientific field research on Spitsbergen, Greenland and Antarctica (23 expeditions. For many years chairman of the Committee on Polar Research of the Polish Academy of Sciences, he is now its Honorary Chairman.

Conformal polishing approach: Tool footprint analysis

Directory of Open Access Journals (Sweden)

José A Dieste

2016-02-01

Full Text Available Polishing process is one of the most critical manufacturing processes during a metal part production because it determines the final quality of the product. Free-form surface polishing is a handmade process with lots of rejected parts, scrap generation and time and energy consumption. Two different research lines are being developed: prediction models of the final surface quality parameters and an analysis of the amount of material removed depending on the polishing parameters to predict the tool footprint during the polishing task. This research lays the foundations for a future automatic conformal polishing system. It is based on rotational and translational tool with dry abrasive in the front mounted at the end of a robot. A tool to part concept is used, useful for large or heavy workpieces. Results are applied on different curved parts typically used in tooling industry, aeronautics or automotive. A mathematical model has been developed to predict the amount of material removed in function of polishing parameters. Model has been fitted for different abrasives and raw materials. Results have shown deviations under 20% that implies a reliable and controllable process. Smaller amount of material can be removed in controlled areas of a three-dimensional workpiece.

Zerodur polishing process for high surface quality and high efficiency

International Nuclear Information System (INIS)

Tesar, A.; Fuchs, B.

1992-08-01

Zerodur is a glass-ceramic composite importance in applications where temperature instabilities influence optical and mechanical performance, such as in earthbound and spaceborne telescope mirror substrates. Polished Zerodur surfaces of high quality have been required for laser gyro mirrors. Polished surface quality of substrates affects performance of high reflection coatings. Thus, the interest in improving Zerodur polished surface quality has become more general. Beyond eliminating subsurface damage, high quality surfaces are produced by reducing the amount of hydrated material redeposited on the surface during polishing. With the proper control of polishing parameters, such surfaces exhibit roughnesses of < l Angstrom rms. Zerodur polishing was studied to recommend a high surface quality polishing process which could be easily adapted to standard planetary continuous polishing machines and spindles. This summary contains information on a polishing process developed at LLNL which reproducibly provides high quality polished Zerodur surfaces at very high polishing efficiencies

Lysenko affair and Polish botany.

Science.gov (United States)

Köhler, Piotr

2011-01-01

This article describes the slight impact of Lysenkoism upon Polish botany. I begin with an account of the development of plant genetics in Poland, as well as the attitude of scientists and the Polish intelligentsia toward Marxist philosophy prior to the World War II. Next I provide a short history of the introduction and demise of Lysenkoism in Polish science, with a focus on events in botany, in context with key events in Polish science from 1939 to 1958. The article outlines the little effects of Lysenkoism upon botanists and their research, as well as how botanists for the most part rejected what was often termed the "new biology." My paper shows that though Lysenko's theories received political support, and were actively promoted by a small circle of scientists and Communist party activists, they were never accepted by most botanists. Once the political climate in Poland altered after the events of 1956, Lysenko's theories were immediately abandoned.

Chemical polishing of partially oxidized T-111 alloy

International Nuclear Information System (INIS)

Teaney, P.E.

1974-01-01

The specimens were pressure-mounted in Bakelite and ground through 600 grit on silicon carbide papers. The specimens were rough-polished on a vibratory polisher for 4 to 6 h, using a water slurry of one micron alumina on Texmet, followed by 0.3-μ alumina on Texmet overnight. Final polishing was accomplished by continuous swabbing with a chemical polish. A chemical polish consisting of ten parts lactic acid, four parts nitric acid, and four parts hydrofluoric acid worked well for the T-111 parent material specimens; however, in the partially oxidized specimens, considerable pitting and staining occurred in the oxygen-affected zone and in the transition zone between the oxygen-affected zone and the parent material. A chemical polish was developed for the partially oxidized specimens by adjusting the ratio of the acids to ten parts lactic acid, two parts nitric acid, and two parts hydrofluoric acid. This slowed the chemical attack on the oxygen-affected zone considerably and, with continuous swabbing, the pitting and stain could be avoided. The specimens were rinsed and checked occasionally on the metallograph to determine when the proper polish had been obtained. Some specimens required intermittent polishing times up to 1 / 2 hour. No relationship could be established between the oxygen content of the specimen and the time required for chemical polishing in the partially oxidized specimens. However, the microstructure of the transition zone was the most difficult to obtain, and specimens with uniform reaction zones across the width of the specimen polished quicker than those with the transition zone

Graphite Composite Panel Polishing Fixture

Science.gov (United States)

Hagopian, John; Strojny, Carl; Budinoff, Jason

2011-01-01

The use of high-strength, lightweight composites for the fixture is the novel feature of this innovation. The main advantage is the light weight and high stiffness-to-mass ratio relative to aluminum. Meter-class optics require support during the grinding/polishing process with large tools. The use of aluminum as a polishing fixture is standard, with pitch providing a compliant layer to allow support without deformation. Unfortunately, with meter-scale optics, a meter-scale fixture weighs over 120 lb (.55 kg) and may distort the optics being fabricated by loading the mirror and/or tool used in fabrication. The use of composite structures that are lightweight yet stiff allows standard techniques to be used while providing for a decrease in fixture weight by almost 70 percent. Mounts classically used to support large mirrors during fabrication are especially heavy and difficult to handle. The mount must be especially stiff to avoid deformation during the optical fabrication process, where a very large and heavy lap often can distort the mount and optic being fabricated. If the optic is placed on top of the lapping tool, the weight of the optic and the fixture can distort the lap. Fixtures to support the mirror during fabrication are often very large plates of aluminum, often 2 in. (.5 cm) or more in thickness and weight upwards of 150 lb (68 kg). With the addition of a backing material such as pitch and the mirror itself, the assembly can often weigh over 250 lb (.113 kg) for a meter-class optic. This innovation is the use of a lightweight graphite panel with an aluminum honeycomb core for use as the polishing fixture. These materials have been used in the aerospace industry as structural members due to their light weight and high stiffness. The grinding polishing fixture consists of the graphite composite panel, fittings, and fixtures to allow interface to the polishing machine, and introduction of pitch buttons to support the optic under fabrication. In its

APS 3D: a new benchmark in aspherical polishing

Science.gov (United States)

Gauch, Daniel; Mikulic, Dalibor; Veit, Christian

2017-10-01

The APS 3D system performs polishing and form correction in one step in order to reduce overall process time, reduce the number of polishing steps required and eliminate the need for highly skilled operators while providing a repeatable polishing process. This new 3D Polishing system yields better surface quality, and a better slope error, automatically determining the optimum speeds, feed rates and polish pressures to achieve a deterministic process based on the required quality parameters input by the operator. The process flow is always the same to ensure consistent quality and target quality values are defined before polishing begins.

Polish Americans. Second, Revised Edition.

Science.gov (United States)

Lopata, Helen Znaniecka

This book examines Polonia, the Polish ethnic community in America created by three giant waves of immigration between 1880 and 1990. The complicated history of this ethnic group is reflected in the lives of increasing numbers of Polish Americans, including recent immigrants brought by political and economic changes, as they achieve middle class…

Experimental Polish-Lithuanian Corpus with the Semantic Annotation Elements

Directory of Open Access Journals (Sweden)

Danuta Roszko

2015-06-01

Full Text Available Experimental Polish-Lithuanian Corpus with the Semantic Annotation Elements In the article the authors present the experimental Polish-Lithuanian corpus (ECorpPL-LT formed for the idea of Polish-Lithuanian theoretical contrastive studies, a Polish-Lithuanian electronic dictionary, and as help for a sworn translator. The semantic annotation being brought into ECorpPL-LT is extremely useful in Polish-Lithuanian contrastive studies, and also proves helpful in translation work.

Wolfram syndrome in the Polish population: novel mutations and genotype-phenotype correlation.

Science.gov (United States)

Zmyslowska, A; Borowiec, M; Antosik, K; Szalecki, M; Stefanski, A; Iwaniszewska, B; Jedrzejczyk, M; Pietrzak, I; Mlynarski, W

2011-11-01

Wolfram syndrome is a rare form of diabetes mellitus associated with optic atrophy and disorders of different organs (e.g. diabetes insipidus, hearing loss, ataxia, anaemia and many others). This syndrome is caused by recessive mutations in the wolframin gene (WFS1) localized on chromosome 4p16·1. The aim of this study was to identify the causative mutations in WFS1 in a group of Polish patients with suspected Wolfram syndrome. Nine patients with clinical symptoms consistent with Wolfram syndrome (at least diabetes mellitus and optic atrophy) and 22 first-degree relatives were examined. The molecular analysis was carried out by direct sequencing of the exons, the exon-intron junctions, and the 5' and 3' untranslated regions of WFS1. Nine different mutations in WFS1 (five of them novel) were identified in the nine patients. Six patients were homozygous for the following mutations: V412fs, S443R, W539X, V659fs. They developed diabetes at a mean age of 5·2 years. Three patients were compound-heterozygous for the following mutations: S167fs, Q392X, Y513fs, W648X, V779G. They developed diabetes at a mean age of 6·5 years. Mean age of diagnosis of diabetes among the Polish patients was typical for Wolfram syndrome; however, compound-heterozygous patients were slightly older at diabetes onset. © 2011 Blackwell Publishing Ltd.

Assessing operability of a novel polisher arrangement using MMS

International Nuclear Information System (INIS)

Shor, S.W.W.

1987-01-01

A condensate polisher is intended to remove both particulate matter and ionic material from the condensate. Condensate polishers have normally been placed directly in the condensate system downstream of the condensate pumps. This inline location has certain disadvantages. These disadvantages are discussed. Placing the polisher in a sidestream location, where water is removed from the condensate system, pumped through the polisher, and then returned to the condensate system provides a solution to these disadvantages. Several possible types of sidestream installations is described. This has a polisher taking unpolished condensate from one compartment from one compartment of a divided hotwell in a specially modified condenser and returning polished condensate to the other compartment. The polisher is supplied by its own dedicated pumps, which have a head requirement sufficient only to overcome the pressure drop through the polisher circuit at a flow rate of 110% of maximum condensate flow. This concept is very attractive but has not yet been tested even though it is being installed in several new units. A simulation was, therefore, performed using MMS to provide confidence that this particular sidestream polisher arrangement was operationally viable

German Foreign Fighters in Syria and Iraq

Science.gov (United States)

2016-03-01

depressed and less integrated into their new societies.29 Germany’s Turkish population exemplifies this integration deficit. Of Germany’s 4.3 million...the German Chancellor in a YouTube video, for example), the German press tends to abandon their earlier self-restraint and freely publishes the...Germany’s most well-known Salafist preachers. In addition to being mentored by Pierre Vogel, Cuspert appeared in YouTube recordings at Islam

Comparison of Various Databases for Estimation of Dietary Polyphenol Intake in the Population of Polish Adults

Directory of Open Access Journals (Sweden)

Anna M. Witkowska

2015-11-01

Full Text Available The primary aim of the study was to estimate the consumption of polyphenols in a population of 6661 subjects aged between 20 and 74 years representing a cross-section of the Polish society, and the second objective was to compare the intakes of flavonoids calculated on the basis of the two commonly used databases. Daily food consumption data were collected in 2003–2005 using a single 24-hour dietary recall. Intake of total polyphenols was estimated using an online Phenol-Explorer database, and flavonoid intake was determined using following data sources: the United States Department of Agriculture (USDA database combined of flavonoid and isoflavone databases, and the Phenol-Explorer database. Total polyphenol intake, which was calculated with the Phenol-Explorer database, was 989 mg/day with the major contributions of phenolic acids 556 mg/day and flavonoids 403.5 mg/day. The flavonoid intake calculated on the basis of the USDA databases was 525 mg/day. This study found that tea is the primary source of polyphenols and flavonoids for the studied population, including mainly flavanols, while coffee is the most important contributor of phenolic acids, mostly hydroxycinnamic acids. Our study also demonstrated that flavonoid intakes estimated according to various databases may substantially differ. Further work should be undertaken to expand polyphenol databases to better reflect their food contents.

Laser polishing of additive manufactured Ti alloys

Science.gov (United States)

Ma, C. P.; Guan, Y. C.; Zhou, W.

2017-06-01

Laser-based additive manufacturing has attracted much attention as a promising 3D printing method for metallic components in recent years. However, surface roughness of additive manufactured components has been considered as a challenge to achieve high performance. In this work, we demonstrate the capability of fiber laser in polishing rough surface of additive manufactured Ti-based alloys as Ti-6Al-4V and TC11. Both as-received surface and laser-polished surfaces as well as cross-section subsurfaces were analyzed carefully by White-Light Interference, Confocal Microscope, Focus Ion Beam, Scanning Electron Microscopy, Energy Dispersive Spectrometer, and X-ray Diffraction. Results revealed that as-received Ti-based alloys with surface roughness more than 5 μm could be reduce to less than 1 μm through laser polishing process. Moreover, microstructure, microhardness and wear resistance of laser-polished zone was investigated in order to examine the thermal effect of laser polishing processing on the substrate of additive manufactured Ti alloys. This proof-of-concept process has the potential to effectively improve the surface roughness of additive manufactured metallic alloy by local polishing method without damage to the substrate.

Cultural events – does attendance improve health? Evidence from a Polish longitudinal study

Directory of Open Access Journals (Sweden)

Dorota Węziak-Białowolska

2016-08-01

Full Text Available Abstract Background Although there is strong advocacy for uptake of both the arts and creative activities as determinants of individual health conditions, studies evaluating causal influence of attendance at cultural events on population health using individual population data on health are scarce. If available, results are often only of an associative nature. In this light, this study investigated causative impact of attendance at cultural events on self-reported and physical health in the Polish population. Methods Four recent waves (2009, 2011, 2013 and 2015 of the biennial longitudinal Polish household panel study, Social Diagnosis, were analysed. The data, representative for the Polish population aged over 16, with respect to age, gender, classes of place of residence and NUTS 2 regions, were collected from self-report questionnaires. Causative influence of cultural attendance on population health was established using longitudinal population representative data. To account for unobserved heterogeneity of individuals and to mitigate issues caused by omitted variables, a panel data model with a fixed effects estimator was applied. The endogeneity problem (those who enjoy good health are more likely to participate in cultural activities more frequently was circumvented by application of instrumental variables. Results Results confirmed positive association between cultural attendance and self-reported health. However, in contrast to the often suggested positive causative relationship, such a link was not confirmed by the study. Additionally, no evidence was found to corroborate a positive impact from cultural attendance on physical health. Both findings were substantiated by augmentation in the longitudinal perspective and causal link. Conclusions We showed the relation between attendance at cultural events and self-reported health could only be confirmed as associational. Therefore, this study provided little justification to encourage use

International Round Table “Tatar Materials in Polish Archives” (Warsaw, 31st March – 1st April, 2016

Directory of Open Access Journals (Sweden)

M.M. Gibatdinov

2016-12-01

Full Text Available This article present a short report on the International round table “Tatar materials in Polish archives” organized in Warsaw on March 31 – April 1, 2016. Round table was a result of international scientific cooperation between Marjani Institute of History, Polish Academy of Sciences, University of Warsaw, Institute for Caucasian-, Tatar- and Turkestan Studies (ICATAT. It was a part of the long-term research project “Tatar Materials in Foreign Archives” carried out by the Marjani Institute of History in the framework of State Program of the Republic of Tatarstan “Preserving of Tatar Ethnical Identity (for years 2014–2016.” The following papers was presented on the round table: “On results of recent researches of Tatar materials in Polish archives” by Prof., Dr. Dariusz Kołodziejczyk, Director of the Institute of History, University of Warsaw; “The New Records of Old Heritage – Documents about Tatars from Regional and Private Archives in Polish-German Context”, by Dr. Mieste Hottop-Riecke, Director of ICATAT and Dr. Stephan Theilig, Director of Brandenburg-Preußen Museum Wustrau; “Maniere de Faire la Guerre des Tartares’ as Hybrid War in the Military Art of Crimean and Dobruja Tatars in the Early modern Time”, by Dr. Andrzej Gliwa, University of Warsaw, Department of History, Faculty Member; “Tatar Documents in Archives and Museums in Bialystok” by Dr. Artur Konopacki, Assistant Professor in Faculty of Pedagogy and Psychology, University of Bialystok; ”The first results of international research project ”Yazma Miras – Written Heritage” by Marat Gibatdinov. Participants of round table discussed a possible prospects for future cooperation in the field of researching and digitalizing of Tatar materials from Polish archives. During the conference the meetings with the representatives of Tatar community in Poland and Lithuania was organized, as well as the study visits to the Tatar Mosque and Tatar

Loneliness among Polish migrants in the Netherlands: The impact of presence and location of partners and offspring

Directory of Open Access Journals (Sweden)

Thijs van den Broek

2017-09-01

Full Text Available Background: Research using nonmigrant samples indicates that having a partner and children is protective against loneliness. Such beneficial effects may be weaker for migrants with partners and/or children living in different countries. Objective: We assess how feelings of loneliness among Polish migrants in the Netherlands compare to levels among the general Dutch population and how migrants' feelings of loneliness vary by presence and location of partners and offspring. Methods: We used weighted data from the Families of Poles in the Netherlands survey (n=1,129. Wald tests were used to compare levels of loneliness among Polish migrants with scores reported in a different study for the general Dutch population. Linear regression was used to estimate how presence and location of partners and children were associated with loneliness. Results: Polish migrants in the Netherlands were lonelier than the general Dutch population. Among men, those who had been in the Netherlands for longer were lonelier than those who had more recently arrived. Unpartnered men and men with a partner living abroad were lonelier than men with a partner living in the Netherlands. For women, no effects of presence and location of a partner were found. Presence and location of children made little difference. Conclusions: Although loneliness is often considered a problem for older individuals, feelings of loneliness are also strong among working-age Polish migrants. Consistent with studies on nonmigrant samples, we found that men with a partner were less lonely than unpartnered men, but only when the partner also resided in the Netherlands. Contribution: [see conclusions

Albrecht Scholz (1940-2013): German dermatologist and historian of dermatology.

Science.gov (United States)

Grzybowski, Andrzej; Parish, Lawrence Charles; Plewig, Gerd

2014-01-01

Albrecht Scholz (Figure 1) was born in Görlitz (now Zgorzelec, a city located at the Polish-German border, covering both sides of the River Nysa) on September 6, 1940, the youngest of three children. His father was a laryngologist, specializing in voice and hearing impairment. Scholz attended school in his hometown and in 1958 passed his Matura examination, after which he studied medicine at both Humboldt University in Berlin and the “Carl Gustav Carus” Medical Academy in Dresden. Following successful completion of the state examination in 1964 and an internship at the Reichenbach Hospital the following year, he was granted the right to practice medicine. His 1964 doctoral dissertation was titled, “Evaluation of Astrand's Steps in Elderly Patients.”

The Great Époque of the Consumption of Imported Broadcasts. West European Television Channels and Polish Audiences during the System Transition

Directory of Open Access Journals (Sweden)

Patryk Wasiak

2014-06-01

Full Text Available This article shows how Polish audiences “domesticated” West European television content available with satellite dishes and semi legal cable TVs during the turnover of the 1980s and 1990s. Based on analysis of viewers’ memoirs and content of magazines dedicated to satellite television, this article discusses how Poles considered channels available with Astra satellite as an attractive entertainment juxtaposed with dull national broadcaster TVP. As this article shows, they primarily “domesticated” German late night erotic shows symbolized by Tutti Frutti and music video available with MTV Europe.

Production of rare earth polishing powders in Russia

International Nuclear Information System (INIS)

Kosynkin, V.D.; Ivanov, E.N.; Kotrekhov, V.A.; Shtutza, M.G.; Grabko, A.I.

1998-01-01

Full text: Russia is a potent producer of polishing powders made of rare earth material presented as an extensive and well developed base. Considering the reserves, the facilities predisposition and the polishing agent (cerium dioxide) content the chief mineral source is loparite, apatite and monazite. The production of rare earth polishing powders is based on specially developed continuous technological processes, corrosion-proof equipment, ensuring a high and stable production quality. A special attention is paid to the radiation safety of the powders. The initial material for the rare earth polishing powders based on loparite is the fusion cake of rare earth chlorides obtained at that mineral chlorination. The technology of the polishing powder production from the REE fusion cake includes the following stages: dissolution of the REE fusion cake chlorides; - thorough cleaning of the REE fusion cake chlorides from radioactive and non-rare-earth impurities; chemical precipitation of REE carbonates, obtaining middlings with proper material and granulometric composition, thermal treatment of precipitated carbonates followed with the operations of drying and roasting; classification of roasted oxides, obtaining end products - polishing powders. The production of fluorine-containing powders includes the stage of their fluorination after the stage of carbonate precipitation. The stabilizing doping can be introduced both into the middlings during one of the technological process of powders manufacturing and into the end product. Rare earth polishing powders are manufactured in Russia by the Share Holding Company 'Chepetz Mechanical Plant' (ChMP Co.), the city of Glasov. The plant produces a number of polishing materials, such as; polishing powder Optinol, containing at least 50% by mass of cerium dioxide, used in the mass production of optical and other articles; polishing powder Optinol-10 with doping to improve the sedimentary and aggregate stability of the solid phase

The Affective Norms for Polish Short Texts (ANPST) Database Properties and Impact of Participants’ Population and Sex on Affective Ratings

Science.gov (United States)

Imbir, Kamil K.

2017-01-01

The Affective Norms for Polish Short Texts (ANPST) dataset (Imbir, 2016d) is a list of 718 affective sentence stimuli with known affective properties with respect to subjectively perceived valence, arousal, dominance, origin, subjective significance, and source. This article examines the reliability of the ANPST and the impact of population type and sex on affective ratings. The ANPST dataset was introduced to provide a recognized method of eliciting affective states with linguistic stimuli more complex than single words and that included contextual information and thus are less ambiguous in interpretation than single word. Analysis of the properties of the ANPST dataset showed that norms collected are reliable in terms of split-half estimation and that the distributions of ratings are similar to those obtained in other affective norms studies. The pattern of correlations was the same as that found in analysis of an affective norms dataset for words based on the same six variables. Female psychology students’ valence ratings were also more polarized than those of their female student peers studying other subjects, but arousal ratings were only higher for negative words. Differences also appeared for all other measured dimensions. Women’s valence ratings were found to be more polarized and arousal ratings were higher than those made by men, and differences were also present for dominance, origin, and subjective significance. The ANPST is the first Polish language list of sentence stimuli and could easily be adapted for other languages and cultures. PMID:28611707

Polishing of silicon based advanced ceramics

Science.gov (United States)

Klocke, Fritz; Dambon, Olaf; Zunke, Richard; Waechter, D.

2009-05-01

Silicon based advanced ceramics show advantages in comparison to other materials due to their extreme hardness, wear and creep resistance, low density and low coefficient of thermal expansion. As a matter of course, machining requires high efforts. In order to reach demanded low roughness for optical or tribological applications a defect free surface is indispensable. In this paper, polishing of silicon nitride and silicon carbide is investigated. The objective is to elaborate scientific understanding of the process interactions. Based on this knowledge, the optimization of removal rate, surface quality and form accuracy can be realized. For this purpose, fundamental investigations of polishing silicon based ceramics are undertaken and evaluated. Former scientific publications discuss removal mechanisms and wear behavior, but the scientific insight is mainly based on investigations in grinding and lapping. The removal mechanisms in polishing are not fully understood due to complexity of interactions. The role of, e.g., process parameters, slurry and abrasives, and their influence on the output parameters is still uncertain. Extensive technological investigations demonstrate the influence of the polishing system and the machining parameters on the stability and the reproducibility. It is shown that the interactions between the advanced ceramics and the polishing systems is of great relevance. Depending on the kind of slurry and polishing agent the material removal mechanisms differ. The observed effects can be explained by dominating mechanical or chemo-mechanical removal mechanisms. Therefore, hypotheses to state adequate explanations are presented and validated by advanced metrology devices, such as SEM, AFM and TEM.

Study on chemical mechanical polishing of silicon wafer with megasonic vibration assisted.

Science.gov (United States)

Zhai, Ke; He, Qing; Li, Liang; Ren, Yi

2017-09-01

Chemical mechanical polishing (CMP) is the primary method to realize the global planarization of silicon wafer. In order to improve this process, a novel method which combined megasonic vibration to assist chemical mechanical polishing (MA-CMP) is developed in this paper. A matching layer structure of polishing head was calculated and designed. Silicon wafers are polished by megasonic assisted chemical mechanical polishing and traditional chemical mechanical polishing respectively, both coarse polishing and precision polishing experiments were carried out. With the use of megasonic vibration, the surface roughness values Ra reduced from 22.260nm to 17.835nm in coarse polishing, and the material removal rate increased by approximately 15-25% for megasonic assisted chemical mechanical polishing relative to traditional chemical mechanical polishing. Average Surface roughness values Ra reduced from 0.509nm to 0.387nm in precision polishing. The results show that megasonic assisted chemical mechanical polishing is a feasible method to improve polishing efficiency and surface quality. The material removal and finishing mechanisms of megasonic vibration assisted polishing are investigated too. Copyright © 2017 Elsevier B.V. All rights reserved.

STUDY OF POLISHING AISI 316L WITH STRUCTURED ABRASIVE

Directory of Open Access Journals (Sweden)

François GOOSSENS

2015-05-01

Full Text Available Finishing process like polishing is usually used to obtain high quality mechanical surface characteristics such as texture and roughness. These operations are mainly handmade and need highly trained operators thus limiting their repeatability and profitability. To optimize the industrialization of the polishing process, it is therefore necessary to modelize the process to built efficient parameter database. The aim of this study is to characterise the polishing of 316L stainless steel with structured abrasive belts. The geometric data of the belts are given, and we then propose a model to determine material removal. An experimental test bench is set up to test this model and characterise the polishing process in terms of forces. It produces samples for different polishing conditions. The different polished surfaces are then analyzed thanks to the roughness and the wettability. Using experimental designs, we are able to validate the proposed model and identify the parameters that influence a polishing operation.

Technological Advances of Robot Assisted Polishing

DEFF Research Database (Denmark)

Lazarev, Ruslan; Top, Søren; Grønbæk, Jens

The efficient polishing of surfaces is very important in mould and die industry. Fine abrasive processes are widely used in industry for the first steps for the production of tools of high quality in terms of finishing accuracy, form and surface integrity. While manufacturing of most components....... In this study, the influence of polishing parameters and type of polishing media on fine abrasive surface finishing is investigated. Experimental study is covering 2D rotational surfaces that is widespread used in mould and dies industry. Application of it is essential for process intelligent control, condition...... monitoring and quality inspection....

Historical Roots of Generalized Trust in Polish Society

Directory of Open Access Journals (Sweden)

Borowiecki Łukasz

2014-11-01

Full Text Available The article analyses how historical events shape generalized trust in contemporary Polish society. The analysis consists of a set of logistic regression models. The impact of historical variables is controlled for age, sex, education and the size of the municipality. This is the first quantitative study on Poland that links historical events with the current levels of trust among Polish citizens. The common knowledge is that the Partitions of Poland had negative impact on trust. Literature on the topic hints that historical demo? graphics should play a role too. The findings suggest that Partitions had little impact with only Greater Poland and Pomerania having lower levels of generalized trust. Historical literacy rate and the presence of Ukrainian or Belarusian population are negatively associated with generalized trust while the abrupt migrations after the World War I are positively associated. The rapid character of migration is supposed to positively impact generalized trust by forcing individuals to cooperate and rely on people with whom they have no personal ties.

Satisfaction with rehabilitative health care services among German and non-German nationals residing in Germany: a cross-sectional study.

Science.gov (United States)

Brzoska, Patrick; Sauzet, Odile; Yilmaz-Aslan, Yüce; Widera, Teresia; Razum, Oliver

2017-08-11

Rehabilitation following medical conditions is largely offered as in-patient service in Germany. Foreign-national residents use rehabilitative services less often than Germans and attain less favourable treatment outcomes. These differences are independent of demographic, socioeconomic and health characteristics. Satisfaction with different aspects of rehabilitative care presumably affects the effectiveness of rehabilitative services. We compared the degree of satisfaction with different domains of the rehabilitative care process between Germans and non-German nationals residing in Germany. We used data from a cross-sectional rehabilitation patient survey annually conducted by the German Statutory Pension Insurance Scheme. The sample comprises 274 513 individuals undergoing medical rehabilitation in 642 hospitals during the years 2007-2011. Participants rated their satisfaction with different domains of rehabilitation on multi-item scales. We dichotomised each scale to low/moderate and high satisfaction. For each domain, a multilevel adjusted logistic regression analysis was conducted to examine differences in the levels of satisfaction between German and non-German nationals. Average marginal effects (AMEs) and 99.5% CI were computed as effect estimates. AMEs represent differences in the probability for the occurrence of the outcome. Turkish nationals had a higher probability for being less satisfied with most aspects of their rehabilitation, with AMEs ranging between 0.05 (99.5% CI 0.00 to 0.09) for 'satisfaction with psychological care' and 0.11 (99.5% CI 0.08 to 0.14) for 'satisfaction with treatments during rehabilitation'. Patients from former Yugoslavia and from Portugal/Spain/Italy/Greece were as satisfied as Germans with most aspects of their rehabilitation. Turkish nationals are less satisfied with their rehabilitative care than other population groups. This may be attributable to the diversity of the population in terms of its expectations towards

The Polish Mother on the defensive? The transformation of the myth and its impact on the motherhood of Polish women

Directory of Open Access Journals (Sweden)

Agnieszka Imbierowicz

2012-06-01

Full Text Available The subject of this presentation is the attempt to define and to present the origins, socio-cultural content and the evolution of The Polish Mother myth, present in the polish national consciousness. The author tries to show how this myth was born, what functions it fulfilled and what forms it took in the changing historical and social reality, from the moment of loss of independence, through a period of real socialism, until the present day. The impact of this myth in the lives of real women and their motherhood is taken into consideration. Then, the author comparing the results of the latest polish sociological researches on the family and its transformation, and transformation of value systems together with theories about the specifics of life in the period of postmodernity, wonders whether it’s time to deconstruct the myth of The Polish Mother, because it does not fit the conditions of today’s world, which is characterized, above all, by the apotheosis of individuality, self-realization and freedom, or perhaps in polish society there is still strong traditionalism in thinking about motherhood, and the myth of The Polish Mother is still alive?

Effect of polishing instruments and polishing regimens on surface topography and phase transformation of monolithic zirconia: An evaluation with XPS and XRD analysis.

Science.gov (United States)

Al-Haj Husain, Nadin; Camilleri, Josette; Özcan, Mutlu

2016-12-01

Polishing procedures might alter monolithic zirconia (MZ) surface resulting in phase changes that can be deleterious for clinical performance and antagonist tooth wear. This study investigated the topographical features and phase transformation in MZ after polishing with different regimens simulating the clinical workflow. ​ MZ specimens (Katana Zirconia HT, Kuraray-Noritake) (12×12×1.8 mm(3)) were grinded and polished using one of the five systems assessed: BG: Silicone carbide polishers (Brownie, Greenie, Super Greenie); CG: Diamond impregnated ceramic polisher kit (Ceragloss); EV: Synthetically bonded grinder interspersed with diamond (EVE Kit); SL: Urethane coated paper with aluminium oxide grits (Soflex Finishing and Polishing System Kit) and DB: Diamond bur (8 µm). Polished specimens were initially roughened with 220 µm diamond burs (Grinding Bur-GB) (10 s, 160.000160,000 rpm) and considered for baseline measurements. Polishing regimens were performed for 10 s using a slow-speed hand piece under water-cooling except for SL, in a custom made device (750 g; 5000 and 75,000 rpm). Surface roughnesses, phase changes (XRD) were assessed, surface characterization was performed (SEM, EDS). The highest roughness was obtained with the EV system (1.11 µm) compared to those of other systems (0.13-0.4 µm) (pθ and minor peak at 34.94°2θ. While GB, CG, EV, SL and DB exhibited a peak shift to the left, BG demonstrated a right peak shift on the 2θ scale. Monoclinic phase change was not noted in any of the groups. All polishing methods, except BG, exhibited a peak shift towards the lower angles of the 2-theta scale. Since the peak shifts were in the order of fractions of an angle they are attributed to stress formation rather than a phase change in the material. Thus, all polishing systems tested may not be detrimental for the phase transformation of MZ. EV system resulted in the highest roughness and none of the polishing regimens restored the polishability to the

Interviewing German scientists on climate change. A preliminary study

Energy Technology Data Exchange (ETDEWEB)

Ungar, S. [GKSS-Forschungszentrum Geesthacht GmbH (Germany). Inst. fuer Kuestenforschung; Toronto Univ., Scarborough (Canada)

2004-07-01

This study is based on in-depth interviews with 25 German scientists at the Coastal Research Institute of the GKSS-Forschungszentrum. It takes as its context the differential rhetoric and planning on climate change found in Germany and North America. The interviews try to throw light on the early German decision to address climate change, and to assess the current attitudes, beliefs and experiences of these German scientists. The results reveal a degree of complacency among these scientists, including a sense that Germany is not particularly threatened by climate change and has the capacity to adapt to it. The scientists are critical of inaction among the German population, but themselves uphold a ''light version'' of the precautionary principle. They have great difficulty translating the idea of climate change into popular metaphors that can be grasped by children. They strongly reject any link between German leadership on the issue as a result of a sense of guilt about the German past. (orig.)

Hierarchical Genetic Analysis of German Cockroach (Blattella germanica) Populations from within Buildings to across Continents

Science.gov (United States)

Vargo, Edward L.; Crissman, Jonathan R.; Booth, Warren; Santangelo, Richard G.; Mukha, Dmitry V.; Schal, Coby

2014-01-01

Understanding the population structure of species that disperse primarily by human transport is essential to predicting and controlling human-mediated spread of invasive species. The German cockroach (Blattella germanica) is a widespread urban invader that can actively disperse within buildings but is spread solely by human-mediated dispersal over longer distances; however, its population structure is poorly understood. Using microsatellite markers we investigated population structure at several spatial scales, from populations within single apartment buildings to populations from several cities across the U.S. and Eurasia. Both traditional measures of genetic differentiation and Bayesian clustering methods revealed increasing levels of genetic differentiation at greater geographic scales. Our results are consistent with active dispersal of cockroaches largely limited to movement within a building. Their low levels of genetic differentiation, yet limited active spread between buildings, suggests a greater likelihood of human-mediated dispersal at more local scales (within a city) than at larger spatial scales (within and between continents). About half the populations from across the U.S. clustered together with other U.S. populations, and isolation by distance was evident across the U.S. Levels of genetic differentiation among Eurasian cities were greater than those in the U.S. and greater than those between the U.S. and Eurasia, but no clear pattern of structure at the continent level was detected. MtDNA sequence variation was low and failed to reveal any geographical structure. The weak genetic structure detected here is likely due to a combination of historical admixture among populations and periodic population bottlenecks and founder events, but more extensive studies are needed to determine whether signatures of global movement may be present in this species. PMID:25020136

Chemical Mechanical Polishing Optimization for 4H-SiC

National Research Council Canada - National Science Library

Neslen, Craig

2000-01-01

.... Preliminary chemical mechanical polishing (CMP) studies of 1 3/8" 4H-SiC wafers were performed in an attempt to identify the polishing parameter values that result in a maximum material removal rate and thus reduce substrate polishing time...

Laser polishing of 3D printed mesoscale components

International Nuclear Information System (INIS)

Bhaduri, Debajyoti; Penchev, Pavel; Batal, Afif; Dimov, Stefan; Soo, Sein Leung; Sten, Stella; Harrysson, Urban; Zhang, Zhenxue; Dong, Hanshan

2017-01-01

Highlights: • Process optimisation for laser polishing novel 3D printed SS316L parts. • Evaluating the effects of key polishing parameters on SS316L surface roughness. • Detailed spectroscopic analysis of oxide layer formation due to laser polishing. • Comparative surface integrity analysis of SS parts polished in air and argon. • A maximum reduction in roughness of over 94% achieved at optimised polishing settings. - Abstract: Laser polishing of various engineered materials such as glass, silica, steel, nickel and titanium alloys, has attracted considerable interest in the last 20 years due to its superior flexibility, operating speed and capability for localised surface treatment compared to conventional mechanical based methods. The paper initially reports results from process optimisation experiments aimed at investigating the influence of laser fluence and pulse overlap parameters on resulting workpiece surface roughness following laser polishing of planar 3D printed stainless steel (SS316L) specimens. A maximum reduction in roughness of over 94% (from ∼3.8 to ∼0.2 μm S_a) was achieved at the optimised settings (fluence of 9 J/cm"2 and overlap factors of 95% and 88–91% along beam scanning and step-over directions respectively). Subsequent analysis using both X-ray photoelectron spectroscopy (XPS) and glow discharge optical emission spectroscopy (GDOES) confirmed the presence of surface oxide layers (predominantly consisting of Fe and Cr phases) up to a depth of ∼0.5 μm when laser polishing was performed under normal atmospheric conditions. Conversely, formation of oxide layers was negligible when operating in an inert argon gas environment. The microhardness of the polished specimens was primarily influenced by the input thermal energy, with greater sub-surface hardness (up to ∼60%) recorded in the samples processed with higher energy density. Additionally, all of the polished surfaces were free of the scratch marks, pits, holes, lumps

Laser polishing of 3D printed mesoscale components

Energy Technology Data Exchange (ETDEWEB)

Bhaduri, Debajyoti, E-mail: debajyoti.bhaduri@gmail.com [Department of Mechanical Engineering, School of Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom); Penchev, Pavel; Batal, Afif; Dimov, Stefan; Soo, Sein Leung [Department of Mechanical Engineering, School of Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom); Sten, Stella; Harrysson, Urban [Digital Metal, Höganäs AB, 263 83 Höganäs (Sweden); Zhang, Zhenxue; Dong, Hanshan [School of Metallurgy and Materials, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom)

2017-05-31

Highlights: • Process optimisation for laser polishing novel 3D printed SS316L parts. • Evaluating the effects of key polishing parameters on SS316L surface roughness. • Detailed spectroscopic analysis of oxide layer formation due to laser polishing. • Comparative surface integrity analysis of SS parts polished in air and argon. • A maximum reduction in roughness of over 94% achieved at optimised polishing settings. - Abstract: Laser polishing of various engineered materials such as glass, silica, steel, nickel and titanium alloys, has attracted considerable interest in the last 20 years due to its superior flexibility, operating speed and capability for localised surface treatment compared to conventional mechanical based methods. The paper initially reports results from process optimisation experiments aimed at investigating the influence of laser fluence and pulse overlap parameters on resulting workpiece surface roughness following laser polishing of planar 3D printed stainless steel (SS316L) specimens. A maximum reduction in roughness of over 94% (from ∼3.8 to ∼0.2 μm S{sub a}) was achieved at the optimised settings (fluence of 9 J/cm{sup 2} and overlap factors of 95% and 88–91% along beam scanning and step-over directions respectively). Subsequent analysis using both X-ray photoelectron spectroscopy (XPS) and glow discharge optical emission spectroscopy (GDOES) confirmed the presence of surface oxide layers (predominantly consisting of Fe and Cr phases) up to a depth of ∼0.5 μm when laser polishing was performed under normal atmospheric conditions. Conversely, formation of oxide layers was negligible when operating in an inert argon gas environment. The microhardness of the polished specimens was primarily influenced by the input thermal energy, with greater sub-surface hardness (up to ∼60%) recorded in the samples processed with higher energy density. Additionally, all of the polished surfaces were free of the scratch marks, pits, holes

Der Tod des Papstes Johannes Paul II. – ein wissenschaftlicher Vergleich von journalistischen Reaktionen auf den Tod des Papstes in Deutschland und in Polen

Directory of Open Access Journals (Sweden)

Olga Nadskakuła ‑Kaczmarczyk

2016-04-01

Full Text Available The aim of this article is to present the reactions of the Polish and German press to the death of Pope John Paul II, compare and analyze them. This approach allows to understand the differences between Polish and German perception of religion, particularly Christianity and the Catholic Church. Poland and Germany have different religious traditions, a different relationship to the church and to church dogma, rituals and piety. This may be observed as the different ways of looking at the death of Pope John Paul II in Polish and German newspapers. Probably these perceptual differences ensued from the paternal figure of the John Paul II and special emotional Polish attitude to the deceased Polish Pope.

Polish Qualitative Sociology: The General Features and Development

OpenAIRE

Konecki, Krzysztof Tomasz

2005-01-01

The article explores the development of Polish qualitative sociology in Poland by presenting its main intellectual routes and some of the general features of Polish sociology. Romanticism and inductionmethod are crucial elements for the development of this discipline in Poland and contribute to its. unigueness. The role of Florian Znaniecki in creating the Polish qualitative sociology is also underlined. Krzysztof Konecki

Sensing roughness and polish direction

DEFF Research Database (Denmark)

Jakobsen, Michael Linde; Olesen, Anders Sig; Larsen, Henning Engelbrecht

2016-01-01

As a part of the work carried out in a project supported by the Danish Council for Technology and Innovation, we have investigated the option of smoothing standard CNC-machined surfaces. In the process of constructing optical prototypes, involving custom-designed optics, the development cost...... and time consumption can become prohibitive in a research budget. Machining the optical surfaces directly is expensive and time consuming. Alternatively, a more standardized and cheaper machining method can be used, calling for the object to be manually polished. During the polishing process, the operator...... needs information about the RMS-value of the surface roughness and the current direction of the scratches introduced by the polishing process. The RMS-value indicates to the operator how far he is from the final finish, and the scratch orientation is often specified by the customer in order to avoid...

Self-rated treatment outcomes in medical rehabilitation among German and non-German nationals residing in Germany: an exploratory cross-sectional study.

Science.gov (United States)

Brzoska, P; Sauzet, O; Yilmaz-Aslan, Y; Widera, T; Razum, O

2016-03-28

In many European countries, foreign nationals experience, on average, less favorable treatment outcomes in rehabilitative care than the respective majority population. In Germany, this for example is reflected in a lower occupational performance and a higher risk of disability retirement after rehabilitation as analyses of routine data show. However, little is known about the perspective of health care users. The aim of the present study was to compare self-rated treatment outcomes between German and non-German nationals undergoing in-patient medical rehabilitation in Germany. We analyzed data from a cross-sectional representative rehabilitation patient survey of 239,811 patients from 642 clinics in Germany who completed about 3 weeks of in-patient rehabilitative treatment. The self-rating of the treatment outcome was based on a dichotomized Likert scale consisting of three items. A multilevel logistic regression analysis adjusted for various demographic, socio-economic, health and other covariates was conducted to examine differences in the self-rated treatment outcome between German and non-German nationals. Of the 239,811 respondents 0.9% were nationals from Turkey, 0.8% had a nationality from a former Yugoslavian country, 0.9% held a nationality from the South European countries Portugal, Spain, Italy or Greece and 1.9% were nationals from other countries. Non-German nationals reported a less favorable self-rated outcome than Germans. Adjusted odds ratios [OR] for reporting a less favorable treatment outcome were 1.24 (95%-confidence interval [95%-CI]: 1.12-1.37) for nationals from the South European countries Portugal/Spain/Italy/Greece, 1.62 (95%-CI: 1.45-1.80) for Turkish nationals and 1.68 (95%-CI: 1.52-1.85) for nationals from Former Yugoslavia. Knowledge on health outcomes from the patients' point of view is important for the provision of patient-centered health care. Our study showed that non-German nationals report less favorable outcomes of

German Studies in America. German Studies Notes.

Science.gov (United States)

Sander, Volkmar; Osterle, Heinz D.

This volume contains two papers, "German Studies in America," by Volkmar Sander, and "Historicism, Marxism, Structuralism: Ideas for German Culture Courses," by Heinz D. Osterle. The first paper discusses the position of German studies in the United States today. The greatest challenge comes from low enrollments; therefore,…

The German risk study. Pt. 2

International Nuclear Information System (INIS)

Burkart, K.

1980-01-01

A severe nuclear power plant accident can be followed by a considerable release of radioactive effluents into the atmosphere. Due to atmospheric dispersion, areas of different sizes can be contaminated. The corresponding doses can cause early illnesses, early fatalities, latent effects and genetic effects. They are accompanied by economic effects. Within the consequence model of the German Risk Study, early and late fatalities and genetically significant doses are calculated. The calculations are based on real data or phenomena such as the population around 19, present or future German sites, or 115 real weather sequences, as well as on models such as an atmospheric dispersion model, a dose model, a model of protective actions or a health effects model. Within this lecture, the consequence model applied in the German Risk Study will be discussed in detail and the results will be presented. (orig./RW)

Effects of polishing procedures on color stability of composite resins

Directory of Open Access Journals (Sweden)

Ahmet Umut Güler

2009-04-01

Full Text Available The purpose of this study was to investigate the effect of different polishing methods on color stability of posterior, universal and nanohybrid composite resin restorative materials upon exposure to a staining agent. Twenty-five specimens were prepared for each of 5 different composite resins (Filtek Z250, Filtek P60, Quadrant LC, Grandio and Filtek Supreme. Specimens were divided into 5 groups and different polishing procedures, including polishing discs (Pd, polishing discs then diamond polishing paste (PdP, polishing discs then a liquid polishing system (Biscover (PdB, and combinations of these (PdPB were used. Unpolished specimens served as the control (C. The specimens were stored for 48 h in a coffee solution. The color of all specimens was measured before and after exposure with a colorimeter, and total color change (DE* were calculated. The data were analyzed with a two-way ANOVA and the means were compared by Tukey HSD test (a=0.05. The lowest color difference was observed in the groups PdP and C, while the highest color difference was observed in PdPB, and PdB. When comparing the five different restorative materials, no significant difference was observed between FiltekP60 and FiltekZ250, and these materials demonstrated significantly less color change than Quadrant LC and the nanohybrid materials (Grandio, Filtek Supreme. The posterior (Filtek P60 and universal (Filtek Z250 composite resin restorative materials, which do not contain tetraethyleneglycol dimethacrylate (TEGDMA, were found to be less stainable than the nanohybrid (Grandio, Filtek Supreme and universal (Quadrant LC composite resins, which contain TEGDMA. The use of diamond polishing paste after polishing with polishing discs significantly decreased staining when compared to the groups that used polishing discs alone, for all restorative materials tested. The highest color change values were obtained for the specimens that were polished with the Biscover liquid polish

The formation of the polish opposite movement in Western Ukraine at the beginning of the Second world war

Directory of Open Access Journals (Sweden)

Viktoriya V. Dashko

2016-02-01

Full Text Available The article highlights the nature of the Soviet totalitarian ethnic policy and its influence on the origin of the Polish opposite movement in Western Ukraine at the beginning of the Second World War. It also clarifies the main factors of the formation of active opposite movements among the Polish part of population in the Western Ukraine territory, which withdrew to the Soviet Union due to the distribution of Poland as a result of the Molotov-Ribbentrop Pact. The author defined category of Polish nationality persons, who were dissatisfied with Stalin’s repressive policies in 1939-1941 and become that social environment, in which finally formed opposite movement to totalitarianism and, in particular, antinational regime against the Polish ethnos, and the environment from which later appeared activists of this movement. By the author was analyzed the activity of Soviet authorities in the occupied territories of the former «Wshodnih kresuv» of the Second Rich Pospolyta and determined main factors that led to dissatisfaction with the rigid Soviet policy against the former government officials, military precipitators and servants of the Roman Catholic Church. Investigated and determined features of the Polish opposite movement formation in the former eastern Polish territories occupied in 1939 by the Soviet Union and seized in 1941 by Nazi Germany. The article also describes the origin and activity of the first underground Polish armed forces on Ukrainian territory.

Polish Semantic Parser

Directory of Open Access Journals (Sweden)

Agnieszka Grudzinska

2000-01-01

Full Text Available Amount of information transferred by computers grows very rapidly thus outgrowing the average man's capability of reception. It implies computer programs increase in the demand for which would be able to perform an introductory classitication or even selection of information directed to a particular receiver. Due to the complexity of the problem, we restricted it to understanding short newspaper notes. Among many conceptions formulated so far, the conceptual dependency worked out by Roger Schank has been chosen. It is a formal language of description of the semantics of pronouncement integrated with a text understanding algorithm. Substantial part of each text transformation system is a semantic parser of the Polish language. It is a module, which as the first and the only one has an access to the text in the Polish language. lt plays the role of an element, which finds relations between words of the Polish language and the formal registration. It translates sentences written in the language used by people into the language theory. The presented structure of knowledge units and the shape of understanding process algorithms are universal by virtue of the theory. On the other hand the defined knowledge units and the rules used in the algorithms ure only examples because they are constructed in order to understand short newspaper notes.

Microbiological flora and nail polish: a brief report.

Science.gov (United States)

Rayan, G M; Flournoy, D J; Schlageter, P

1994-11-01

Removing nail polish and prosthetic nails from operating room (OR) personnel prior to scrubbing and from patients prior to hand surgery is recommended but not practiced in many hospitals. There is concern that nail polish can act as a vehicle for the transfer of infectious agents. This study was designed to determine the incidence of microbiological flora of nail polish in a clinical setting.

Coexistence of ACE (I/D) and PAI-1 (4G/5G) gene variants in recurrent miscarriage in Polish population.

Science.gov (United States)

Kurzawińska, Grażyna; Barlik, Magdalena; Drews, Krzysztof; Różycka, Agata; Seremak-Mrozikiewicz, Agnieszka; Ożarowski, Marcin; Klejewski, Andrzej; Czerny, Bogusław; Wolski, Hubert

2016-01-01

Recurrent miscarriage (RM) is one of the most common obstetric complications. Numerous studies have suggested that genetic variants leading to an impaired balance between coagulation and fibrinolysis may contribute to elevated risk of pregnancy loss. The aim of the study was to investigate a possible association between angiotensin-converting enzyme (ACE, rs1799752) I/D and plasminogen activator inhibitor type 1 (PAI-1, rs1799768) 4G/5G polymorphisms with RM among Polish women. DNA was extracted from peripheral blood samples of 152 women with a history of ≥ 2 consecutive pregnancy losses before 22 weeks of gestation, and 180 healthy controls with at least 1 live birth at term and no history of pregnancy loss. Polymerase chain reaction (PCR) and restriction fragment length polymorphism (RFLP) were used to identify the polymorphisms. No statistically significant differences were found in genotype and allele frequencies of the studied polymorphisms. The most relevant difference between the study group and controls was found for the ID genotype distribution of the ACE gene (52.6 vs. 46.7%, OR = 1.27, p = 0.28). The analysis of genotype coexistence revealed a higher incidence of the combination of the ACE II and the PAI-1 4G/4G genotypes in the control group (10.0 vs.5.9% in control group; p = 0.17). The obtained results suggest no apparent association between the ACE I/D, PAI-1 4G/5G polymorphisms and increased RM susceptibility in the analyzed Polish population.

The German version of the Camberwell Assessment of Need for the Elderly (CANE): evaluation of content validity and adaptation to the German-speaking context.

Science.gov (United States)

Stein, Janine; Luppa, Melanie; König, Hans-Helmut; Riedel-Heller, Steffi G

2015-11-01

The Camberwell Assessment of Need for the Elderly (CANE) was developed for the assessment of physical-, psychological-, and environment-related needs in the elderly. The aim of this study was to revise and adapt the German version of the CANE with regard to the content validity of the instrument. Following a multistage approach, face-to-face interviews using the CANE, an expert survey and a multidisciplinary consensus conference were conducted in order to evaluate the frequency and relevance of met and unmet needs in the German elderly population, and to modify the content of the CANE for the German-speaking countries. In Germany, unmet physical needs including physical health, medication, eyesight/hearing/communication, mobility/falls, self-care, and continence were found to have top priority closely followed by social needs (company, intimate relationships, daytime activities, information, and abuse/neglect). Psychological needs were the lowest ranked care category. Experts' proposals for the improvement of the German version of the CANE were collected. All findings were discussed and integrated in the multidisciplinary consensus conference with the result of a revised and adapted CANE that is applicable in the German-speaking context. The provision of an adapted and improved German version of the CANE may substantially contribute to a comprehensive and valid assessment of needs in the elderly population. The results of this study represent an important basis for comprehensive needs assessment in the elderly in the theoretical and practical field of healthcare and health services research.

Reel-to-reel substrate tape polishing system

Energy Technology Data Exchange (ETDEWEB)

Selvamanickam, Venkat; Gardner, Michael T.; Judd, Raymond D.; Weloth, Martin; Qiao, Yunfei

2005-06-21

Disclosed is a reel-to-reel single-pass mechanical polishing system (100) suitable for polishing long lengths of metal substrate tape (124) used in the manufacture of high-temperature superconductor (HTS) coated tape, including multiple instantiations of a polishing station (114) in combination with a subsequent rinsing station (116) arranged along the axis of the metal substrate tape (124) that is translating between a payout spool (110a) and a take-up spool (110b). The metal substrate tape obtains a surface smoothness that is suitable for the subsequent deposition of a buffer layer.

Polish Qualitative Sociology: The General Features and Development

OpenAIRE

Konecki, Krzysztof Tomasz; Kacperczyk, Anna; Marciniak, Łukasz

2005-01-01

Forum Qualitative Sozialforschung / Forum: Qualitative Social Research,2005, 6(3) The article explores the development of Polish qualitative sociology in Poland by presenting its main intellectual routes and some of the general features of Polish sociology. Romanticism and inductionmethod are crucial elements for the development of this discipline in Poland and contribute to its. unigueness. The role of Florian Znaniecki in creating the Polish qualitative sociology is also underlined.

German Value Set for the EQ-5D-5L.

Science.gov (United States)

Ludwig, Kristina; Graf von der Schulenburg, J-Matthias; Greiner, Wolfgang

2018-06-01

The objective of this study was to develop a value set for EQ-5D-5L based on the societal preferences of the German population. As the first country to do so, the study design used the improved EQ-5D-5L valuation protocol 2.0 developed by the EuroQol Group, including a feedback module as internal validation and a quality control process that was missing in the first wave of EQ-5D-5L valuation studies. A representative sample of the general German population (n = 1158) was interviewed using a composite time trade-off and a discrete choice experiment under close quality control. Econometric modeling was used to estimate values for all 3125 possible health states described by EQ-5D-5L. The value set was based on a hybrid model including all available information from the composite time trade-off and discrete choice experiment valuations without any exclusions due to data issues. The final German value set was constructed from a combination of a conditional logit model for the discrete choice experiment data and a censored at -1 Tobit model for the composite time trade-off data, correcting for heteroskedasticity. The value set had logically consistent parameter estimates (p German version of EQ-5D-5L representing the preferences of the German population. The study successfully employed for the first time worldwide the improved protocol 2.0. The value set enables the use of the EQ-5D-5L instrument in economic evaluations and in clinical studies.

PLASMA-2005: International Conference on Research and Applications of Plasmas combined with the 3. German-Polish Conference on Plasma Diagnostics for Fusion and Applications and the 5. French-Polish Seminar on Thermal Plasma in Space and Laboratory. Book of Abstracts

International Nuclear Information System (INIS)

Ksiazek, K.

2005-01-01

The International Conferences 'PLASMA' have been organized in Poland every two years since 1993. The German-Polish Conferences on Plasma Diagnostics were started in 2002, and the French-Polish Seminars on Thermal Plasmas were initiated in 1997. To reduce a number of topical conferences and to improve an exchange of information among different plasma research groups it was agreed to organize for the first time the triple conference at the Opole University, Poland, on September 6-9, 2005. The chairman of the International Scientific Committee (ISC) was Professor Marek J. Sadowski from IPJ in Swierk, and the co-chairmen were Professor Thomas Klinger of the IPP-Greifswald and Professor Michel Dudeck of the CNRS-Orleans. The chairman of LOC was Professor Jozef Musielok of the Opole University. This conference was designed for interested scientists, engineers and students from all the countries, but particularly for these from the Central and Eastern Europe (see http://draco.uni.opole.pl/plasma2005). The scientific programme of the conference embraced almost all directions of plasma research and technology, i.e.: 1. Elementary processes and general theory of plasma; 2. Plasmas in tokamaks, stellerators and related experiments; 3. plasmas in Z-pinch and PF discharges; 4. Plasmas produced by intense laser beams; 5. Plasmas of micro-wave and glow discharges; 6. Plasmas in spark- and arc-discharges; 7. Plasmas in space; 8. Diagnostics and experimental facilities; 9. Applications of quasi-stationary and pulsed plasmas. Participants of the conference were 127 plasma experts (including 23 invited speakers) from 13 different countries, as well as several honorary guests from local authorities and the most important plasma research centers in Poland. Most numerous groups came from Poland (58 persons), Germany (15 persons), France (14 persons), Czech Republic (11 persons), Russia (7 persons), and Ukraine (6 persons). The participants came also from Belarus, Hungary, Iran, Japan

21 CFR 872.6030 - Oral cavity abrasive polishing agent.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Oral cavity abrasive polishing agent. 872.6030... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6030 Oral cavity abrasive polishing agent. (a) Identification. An oral cavity abrasive polishing agent is a device in paste or powder form...

… but You Are Not German." -- Afro-German Culture and Literature in the German Language Classroom

Science.gov (United States)

Schenker, Theresa; Munro, Robert

2016-01-01

Units and classes dedicated to multiculturalism in Germany have predominantly focused on Turkish-German literature and culture. Afro-Germans have been a minority whose culture and literature have only marginally been included in German classes, even though Afro-Germans have been a part of Germany for centuries and have undergone efforts at…

Education and employment in patients with juvenile idiopathic arthritis - a standardized comparison to the German general population.

Science.gov (United States)

Schlichtiger, Jenny; Haas, Johannes-Peter; Barth, Swaantje; Bisdorff, Betty; Hager, Lisa; Michels, Hartmut; Hügle, Boris; Radon, Katja

2017-05-22

Although several studies show that JIA-patients have significantly lower employment rates than the general population, the research on educational and occupational attainments in patients with juvenile idiopathic arthritis (JIA) remain conflicting most likely due to small sample sizes. Therefore, aim of this study is to compare the educational achievements and employment status of 3698 JIA-patients with the German general population (GGP). "SEPIA" was a large cross-sectional study on the current status of a historic cohort of JIA-patients treated in a single center between 1952 and 2010. For the analyses of education and employment a sub-cohort was extracted, including only adult cases with a confirmed diagnosis of JIA (N = 2696). Participants were asked to fill out a standardized written questionnaire on education and employment. Outcome measures (education/unemployment) were directly standardized to the GGP using data obtained from the National Educational Panel Study 2013 (N = 11,728) and the German Unemployment Statistics 2012 of the Federal Statistical Office (N = 42,791,000). After age- and sex-standardization, 3% (95% Confidence Interval 1.9 to 4.1%) more of the JIA-patients (26%) than of the GGP (23%) had only reached primary education. In contrast, parents of JIA-patients had similar levels of education as parents in the GGP. With a standardized difference of 0.2% (95% CI: 0.16 to 0.19%), the unemployment rate in JIA-patients was slightly, but not significantly higher than in the GGP. Stratifying for disease duration and the current treatment status, differences were confirmed for persons diagnosed before 2001, whilst for patients diagnosed after 2000, differences were found only in JIA-patients with ongoing disease. Medium and high educational achievements did not differ statistically significant between JIA patients and the GPP. Educational achievements in German JIA-patients are significantly lower than in the GGP. Furthermore we were able to

19th Polish Control Conference

CERN Document Server

Kacprzyk, Janusz; Oprzędkiewicz, Krzysztof; Skruch, Paweł

2017-01-01

This volume contains the proceedings of the KKA 2017 – the 19th Polish Control Conference, organized by the Department of Automatics and Biomedical Engineering, AGH University of Science and Technology in Kraków, Poland on June 18–21, 2017, under the auspices of the Committee on Automatic Control and Robotics of the Polish Academy of Sciences, and the Commission for Engineering Sciences of the Polish Academy of Arts and Sciences. Part 1 deals with general issues of modeling and control, notably flow modeling and control, sliding mode, predictive, dual, etc. control. In turn, Part 2 focuses on optimization, estimation and prediction for control. Part 3 is concerned with autonomous vehicles, while Part 4 addresses applications. Part 5 discusses computer methods in control, and Part 6 examines fractional order calculus in the modeling and control of dynamic systems. Part 7 focuses on modern robotics. Part 8 deals with modeling and identification, while Part 9 deals with problems related to security, fault ...

Sexual activity of Polish adults

Directory of Open Access Journals (Sweden)

Beata Pastwa-Wojciechowska

2014-03-01

Full Text Available Aim. The purpose of this research was to explore the subject of sexual activity in the Polish population, with special focus on age and gender differences, and sexual infidelity. Sexual activity is one of the basic factors in initiating and maintaining relationships. On the one hand, sexual activity enables us to meet natural needs and maintain an intimate relationship with another human being; on the other, it may allow us to overcome loneliness and social isolation by providing the opportunity to express feelings of closeness and unity. Material and method. The research was conducted on a representative group of 3,200 Poles aged between 15–49, with the support of a well-known Polish research company – TNS OBOP. Face-to-face and Pencil and Paper (PAPI interviews were carried out. Results. The results focus on two main issues: the age and motives of sexual initiation among teenagers (with a significant percentage starting their sexual activity at the age of 15, and the quality of the sexual lives of adults (average number of sexual partners, sexual infidelity and sexual satisfaction. Conclusion. There is dependence between the type of relationship and the performance or non-performance of sexual activity, as well as the quality of the relationship. Among both adolescents and adults, remaining in a stable relationship (partnership or marriage promotes loyalty. The performance of sexual goals turns out to be an important mechanism regulating the interpersonal aspects of a relationship, influencing their perception and evaluation.

Marlene Dietrich in the German Classroom: A German Film Project--Humanities through the Golden Age of German Cinema.

Science.gov (United States)

Flippo, Hyde

1993-01-01

Marlene Dietrich and other classic performers of German cinema can serve to open up a whole new realm for students of German, at secondary and postsecondary levels. By researching and viewing German and American film classics, students have opportunity to learn more about German language and an important element of German culture that has had…

An Unbiased View of the History of Polish Medical Physics by a Senior Polish Medical Physicist

International Nuclear Information System (INIS)

Chomicki, O. A.

2008-01-01

Here is a story told by Maria Sklodowska-Curie at the meeting of the International Committee of Intellectual Cooperation in 1921: 'In a free literary competition on the role and importance of elephants the Englishman's story was 'My adventures while shooting elephants in South Africa', the Frenchman was more concerned with 'The sexual and erotic life of elephants', while the Polish approach was invariably 'The elephant versus Poland's national independence', which seemed quite understandable in the light of over 120 years when Poland was partitioned and lost its independence. Since then this saying has become proverbial and came to express the unmistakably Polish tendency to see everything in terms of Polish interests. In my remarks and reminiscences on the history of the Polish Society of Medical Physics you will quickly recognize the same tendency. First, I will, among other things, try to open some old cupboards to 'produce good [things] from the store of good' (Matthew 12:35), especially concerning the first few years of the activity in medical physics in Poland, and second, I will draw some conclusions and/or offer suggestions based on what a senior medical physicist has seen for more than 50 years of his activity in this field. (author)

Cannabinoids cases in polish athletes

OpenAIRE

A Pokrywka; Z Obmiński; D Kwiatkowska; R Grucza

2009-01-01

The aim of this study was to investigate the number of cases and the profiles of Polish athletes who had occasionally been using marijuana or hashish throughout the period of 1998-2004, with respect to: sex, age, and discipline of sport as well as the period of testing (in- and out-of-competition). Results of the study were compared with some data reported by other WADA accredited anti-doping laboratories. Totally, 13 631 urine samples taken from Polish athletes of both sexes, aged 10-67 year...

The social shaping of innovation in polish companies

DEFF Research Database (Denmark)

Lorentzen, Anne

2003-01-01

The paper deals with strategies of innovation in Polish manufacturing companies. The point of departure is a theoretical framework of enterprise level innovation, and of the factors forming strategies of innovation on enterprise level. The paper analyses evidence from 23 Polish companies and pres......The paper deals with strategies of innovation in Polish manufacturing companies. The point of departure is a theoretical framework of enterprise level innovation, and of the factors forming strategies of innovation on enterprise level. The paper analyses evidence from 23 Polish companies...... and presents two cases more in detail. The analysis shows that the Polish companies have all been quite innovative, mostly in relation to product innovation. They choose innovation strategies, which are incremental more than radical, and they tend to differentiate their product range rather than to specialise....... They consider quality development a must in the fight for market shares and they adapt equipment and organisation to this goal. The factors forming and determining the strategies of the companies count the technological knowledge and expertise of the owner/founder, the structural changes of the market...

Semi-strong informational efficiency in the Polish foreign exchange market

OpenAIRE

Luksz Goczek

2015-01-01

During the financial crisis a notion that the Polish exchange rate is not determined effectively was very dominant, because of a contagion effect of the global financial crisis on the Polish economy. In addition, many foreign exchange market analysts explained developments in the Polish exchange market trough a hypothesis that the Polish zloty exchange rate follows other exchange rates. This contradicts market efficiency as this would lead to profitable arbitrage possibility based on past inf...

Psychometric properties and measurement invariance of the Beck hopelessness scale (BHS): results from a German representative population sample.

Science.gov (United States)

Kliem, Sören; Lohmann, Anna; Mößle, Thomas; Brähler, Elmar

2018-04-25

The Beck Hopelessness Scale (BHS) has been the most frequently used instrument for the measurement of hopelessness in the past 40 years. Only recently has it officially been translated into German. The psychometric properties and factor structure of the BHS have been cause for intensive debate in the past. Based on a representative sample of the German population (N = 2450) item analysis including item sensitivity, item-total correlation and item difficulty was performed. Confirmatory factor analyses (CFA) for several factor solutions from the literature were performed. Multiple group factor analysis was performed to assess measurement invariance. Construct validity was assessed via the replication of well-established correlations with concurrently assessed measures. Most items exhibited adequate properties. Items #4, #8 and #13 exhibited poor item characteristics- each of these items had previously received negative evaluations in international studies. A one-dimensional factor solution, favorable for the calculation and interpretation of a sum score, was regarded as adequate. A bi-factor model with one content factor and two method factors (defined by positive/negative item coding) resulted in an excellent model fit. Cronbach's alpha in the current sample was .87. Hopelessness, as measured by the BHS, significantly correlated in the expected direction with suicidal ideation (r = .36), depression (r = .53) and life satisfaction (r = -.53). Strict measurement invariance could be established regarding gender and depression status. Due to limited research regarding the interpretation of fit indices with dichotomous data, interpretation of CFA results needs to remain tentative. The BHS is a valid measure of hopelessness in various subgroups of the general population. Future research could aim at replicating these findings using item response theory and cross-cultural samples. A one-dimensional bi-factor model seems appropriate even in a non

Transformation of the Polish Banking Sector

Directory of Open Access Journals (Sweden)

Marek Stefański

2009-07-01

Full Text Available In the post-war period the banking system in Poland underwent two important system transitions: after 1946 and after 1989. The third transformation began after May 1, 2004, but it did not have a systemic character. The Polish banking sector started to operate on the Single European Market. The first part of the paper is devoted to the problems of the banks transformations after 1989 with a special focus on the quantitative development of banks in 19892008, and on subsequent privatisation and consolidation processes. The former intensified in 19891999, and the latter in 19992002. The consolidation process was very noticeable in the sector of cooperative banks after 1994. The second part of the paper includes an economic and financial analysis of the banks. A lot of attention was paid to the liquidity of the banking sector. It was assessed as good, which was confirmed by a short-term rating of Moodys and by the Financial Stability Report 2009, published by the National Bank of Poland in June 2009. The comparison of the net profit of the banking sector in 19972008 shows its dependence on the economic situation and policy. The number of banks with capital adequacy ratio well above the minimum required by the banking supervision is rising. The financial power ratings are not favorable for the domestic banks. The third part of the paper focuses on the development directions of the Polish banking sector. It may be concluded on the basis of the analysis that privatisation and consolidation processes will be continued. They will concentrate on the capital of foreign banks already operating in Poland. As compared with individual foreign banks, the potential of the Polish banking sector is week. The fourth part of the paper focuses on the presentation Polish banking sector in the context of European Union banking sector. The paper finishes with conclusions. Generally, Polish banks have to implement a strategy to enable them to compete on the Single

Effect of Polishing Systems on Surface Roughness and Topography of Monolithic Zirconia.

Science.gov (United States)

Goo, C L; Yap, Auj; Tan, Kbc; Fawzy, A S

2016-01-01

This study evaluated the effect of different chairside polishing systems on the surface roughness and topography of monolithic zirconia. Thirty-five monolithic zirconia specimens (Lava PLUS, 3M ESPE) were fabricated and divided into five groups of seven and polished with the following: Group 1 (WZ)-Dura white stone followed by Shofu zirconia polishing kit; Group 2 (SZ)-Shofu zirconia polishing kit; Group 3 (CE)-Ceramiste porcelain polishers; Group 4 (CM)-Ceramaster porcelain polishers; and Group 5 (KZ)-Komet ZR zirconia polishers. All specimens were ground with a fine-grit diamond bur prior to polishing procedures to simulate clinical finishing. Baseline and post-polishing profilometric readings were recorded and delta Ra values (difference in mean surface roughness before and after polishing) were computed and analyzed using one-way analysis of variance and Scheffe post hoc test (pSEM) images of the ground but unpolished and polished specimens were acquired. Delta Ra values ranged from 0.146 for CE to 0.400 for KZ. Delta Ra values for KZ, WZ, and SZ were significantly greater than for CE. Significant differences in delta Ra values were also observed between KZ and CM. The SEM images obtained were consistent with the profilometric findings. Diamond-impregnated polishing systems were more effective than silica carbide-impregnated ones in reducing the surface roughness of ground monolithic zirconia.

Simulation and analysis of an alternative kinematics for improving the polishing uniformity over the surface of polished tiles

Directory of Open Access Journals (Sweden)

Weingaertner, W. L.

2010-10-01

Full Text Available The present work investigates the possibility of adopting a new kinematics at the industrial polishing lines of porcelain stoneware tile. An alternative motion of the transverse oscillation of the polishing heads is proposed, in which no radical changes in the industries facilities are required. The basic idea is to replace the purely sinus motion of the polishing heads by a rather trapezoid wavelike motion. In theory this could be achieved simply by adopting regular delays at the transverse oscillation motion. Consequences of this alternative kinematics were quantitatively analyzed considering the spatial homogeneity of polishing expected for tiles. Such homogeneity was represented by the coefficient of variation of the distribution of polishing time over the surface, which was in turn determined by means of computational simulations, taking into account the effect of multiple polishing heads.

El presente trabajo investiga la posibilidad de adoptar una nueva cinemática en las líneas de pulido industrial de baldosas de gres porcelánico. Se propone una propuesta alternativa de la oscilación transversal de los cabezales pulidores, en el que no hay cambios radicales en las instalaciones de las industrias son necesarias. La idea básica consiste en sustituir el movimiento totalmente del seno de los cabezales pulidores por un movimiento ondulatorio trapezoide. En teoría, esto podría lograrse sólo mediante la adopción de los habituales retrasos en el movimiento de oscilación transversal. las consecuencias de esta cinemática fueron analizados cuantitativamente, teniendo en cuenta la homogeneidad espacial de pulido. Tal homogeneidad fora representada por el coeficiente de variación de la distribución de lo tiempo de pulido en la superficie, determinada por medio de simulaciones computacionales, teniendo también en cuenta el efecto de pulido de las cabezas múltiples.

German Beck Scale for Suicide Ideation (BSS): psychometric properties from a representative population survey.

Science.gov (United States)

Kliem, Sören; Lohmann, Anna; Mößle, Thomas; Brähler, Elmar

2017-12-04

Suicidal ideation has been identified as one of the major predictors of attempted or actual suicide. Routinely screening individuals for endorsing suicidal thoughts could save lives and protect many from severe psychological consequences following the suicide of loved ones. The aim of this study was to validate the German version of the Beck Scale for Suicide Ideation (BSS) in a sample representative for the Federal Republic of Germany. All 2450 participants completed the first part of the Scale, the BSS-Screen. A risk group of n = 112 individuals (4.6%) with active or passive suicidal ideation was identified and subsequently completed the entire BSS. Satisfactory internal reliability (α = .97 for the BSS-Screen; α = .94 for the entire BSS) and excellent model fit indices for the one-dimensional factorial structure of the BSS-Screen (CFI = .998; TLI = .995; RMSEA = .045 [95%-CI: .030-.061]) were confirmed. Measurement invariance analyses supported strict invariance across gender, age, and depression status. We found correlations with related self-report measures in expected directions comparable to previous studies, indicating satisfactory construct validity. Our study involved cross sectional data, hence neither predictive validity nor retest-reliability were examined. As only the risk group of n = 112 individuals completed the entire measure, confirmatory factor analyses could not be conducted for the full BSS. The German translation of the BSS is a reliable and valid instrument for assessing suicidal ideation in the general population. Using it as a screening device in general and specialized medical care could substantially advance suicide prevention.

Intelligibility of Standard German and Low German to Speakers of Dutch

NARCIS (Netherlands)

Gooskens, C.S.; Kürschner, Sebastian; van Bezooijen, R.

2011-01-01

This paper reports on the intelligibility of spoken Low German and Standard German for speakers of Dutch. Two aspects are considered. First, the relative potential for intelligibility of the Low German variety of Bremen and the High German variety of Modern Standard German for speakers of Dutch is

Cannabinoids cases in polish athletes

Directory of Open Access Journals (Sweden)

A Pokrywka

2009-07-01

Full Text Available The aim of this study was to investigate the number of cases and the profiles of Polish athletes who had occasionally been using marijuana or hashish throughout the period of 1998-2004, with respect to: sex, age, and discipline of sport as well as the period of testing (in- and out-of-competition. Results of the study were compared with some data reported by other WADA accredited anti-doping laboratories. Totally, 13 631 urine samples taken from Polish athletes of both sexes, aged 10-67 years, performing 46 disciplines of sport were tested. Cannabinoids were detected in 267 samples. Among Polish athletes the relative number of positive THC (tetrahydrocannabinol samples was one of the highest in Europe. The group of young Polish athletes (aged 16-24 years was the most THC-positive. THC-positive cases were noted more frequently in male athletes tested during out of competitions. The so-called contact sports (rugby, ice hockey, skating, boxing, badminton, body building and acrobatic sports were those sports, where the higher risk of cannabis use was observed. The legal interpretation of some positive cannabinoids results would be difficult because of some accidental and unintentional use of the narcotics by sportsmen. It was concluded that national anti-doping organizations (NADO’s, which are competent to judge whether the anti-doping rules were violated, should take into account the possibility of non-intentional doping use of cannabinoids via passive smoking of marijuana.

Composite adaptive control of belt polishing force for aero-engine blade

Science.gov (United States)

Zhsao, Pengbing; Shi, Yaoyao

2013-09-01

The existing methods for blade polishing mainly focus on robot polishing and manual grinding. Due to the difficulty in high-precision control of the polishing force, the blade surface precision is very low in robot polishing, in particular, quality of the inlet and exhaust edges can not satisfy the processing requirements. Manual grinding has low efficiency, high labor intensity and unstable processing quality, moreover, the polished surface is vulnerable to burn, and the surface precision and integrity are difficult to ensure. In order to further improve the profile accuracy and surface quality, a pneumatic flexible polishing force-exerting mechanism is designed and a dual-mode switching composite adaptive control(DSCAC) strategy is proposed, which combines Bang-Bang control and model reference adaptive control based on fuzzy neural network(MRACFNN) together. By the mode decision-making mechanism, Bang-Bang control is used to track the control command signal quickly when the actual polishing force is far away from the target value, and MRACFNN is utilized in smaller error ranges to improve the system robustness and control precision. Based on the mathematical model of the force-exerting mechanism, simulation analysis is implemented on DSCAC. Simulation results show that the output polishing force can better track the given signal. Finally, the blade polishing experiments are carried out on the designed polishing equipment. Experimental results show that DSCAC can effectively mitigate the influence of gas compressibility, valve dead-time effect, valve nonlinear flow, cylinder friction, measurement noise and other interference on the control precision of polishing force, which has high control precision, strong robustness, strong anti-interference ability and other advantages compared with MRACFNN. The proposed research achieves high-precision control of the polishing force, effectively improves the blade machining precision and surface consistency, and

[Prevalence of dementia of insured persons with and without German citizenship : A study based on statuatory health insurance data].

Science.gov (United States)

Stock, Stephanie; Ihle, Peter; Simic, Dusan; Rupprecht, Christoph; Schubert, Ingrid; Lappe, Veronika; Kalbe, Elke; Tebest, Ralf; Lorrek, Kristina

2018-04-01

Elderly people with a non-German background are a fast growing population in Germany. Is administrative prevalence of dementia and uptake of nursing-home care similar in the German and non-German insured? Based on routine data, administrative prevalence rates for dementia were calculated for 2013 from a full census of data from one large sickness fund. Patients with dementia (PWD) were identified via ICD-10 codes (F00; F01; F03; F05; G30). Administrative prevalence of dementia was 2.67% in the study population; 3.06% in Germans, and 0.96% in non-Germans (p value German citizenship, except in women aged 80-84 (17.2 vs. 15.4) and for men in the age groups 80-84 (16.5 vs. 14.2), 85-89 years (23.4 vs. 21.5), and above 90 years of age (32.3 vs. 26.3). Standardized to the population of all investigated insured, 31.4% of all Germans with dementia had no longterm care entitlement vs. 35.5% of all patients without German citizenship. Of German patients, 55.1% were institutionalized vs. 39.5% of all patients without German citizenship. There was a higher prevalence of dementia in the very old insured without German citizenship compared to those with German citizenship, especially in men. Non-Germans showed lower uptake of nursing home care compared to Germans. Additionally, Germans had slightly higher nursing care entitlements. It should be investigated further how much of the difference is due to underdiagnosis, cultural differences, or lack of adequate diagnostic work-up.

Monitoring of Robot Assisted Polishing through parameters of acoustic emission

DEFF Research Database (Denmark)

Lazarev, Ruslan; Top, Søren; Bilberg, Arne

The polishing process is essential for the surface generation of machine tooling components in advanced manufacturing. While robot assisted polishing is faster and more consistent than manual polishing, it can still consume a significant part of ma- chining time and operator presence time...

Trace element analysis of nail polishes

International Nuclear Information System (INIS)

Misra, G.; Mittal, V.K.; Sahota, H.S.

1999-01-01

Instrumental neutron activation analysis (INAA) technique was used to measure the concentrations of various trace elements in nail polishes of popular Indian and foreign brands. The aim of the present experiment was to see whether trace elements could distinguish nail polishes of different Indian and foreign brands from forensic point of view. It was found that cesium can act as a marker to differentiate foreign and Indian brands. (author)

Heat shock protein 70 gene polymorphisms are associated with paranoid schizophrenia in the Polish population.

Science.gov (United States)

Kowalczyk, Malgorzata; Owczarek, Aleksander; Suchanek, Renata; Paul-Samojedny, Monika; Fila-Danilow, Anna; Borkowska, Paulina; Kucia, Krzysztof; Kowalski, Jan

2014-03-01

HSP70 genes have been considered as promising schizophrenia candidate genes based on their protective role in the central nervous system under stress conditions. In this study, we analyzed the potential implication of HSPA1A +190G/C, HSPA1B +1267A/G, and HSPA1L +2437T/C polymorphisms in the susceptibility to paranoid schizophrenia in a homogenous Caucasian Polish population. In addition, we investigated the association of the polymorphisms with the clinical variables of the disease. Two hundred and three patients with paranoid schizophrenia and 243 healthy controls were enrolled in the study. Polymorphisms of HSPA1A, -1B, and -1L genes were genotyped using the PCR-RFLP technique. Analyses were conducted in entire groups and in subgroups that were stratified according to gender. There were significant differences in the genotype and allele frequencies of HSPA1A polymorphism between the patients and controls. The +190CC genotype and +190C allele were over-represented in the patients and significantly increased the risk for developing schizophrenia (OR = 3.45 and OR = 1.61, respectively). Interestingly, such a risk was higher for females with the +190CC genotype than for males with the +190CC genotype (OR = 5.78 vs. OR = 2.76). We also identified the CGT haplotype as a risk haplotype for schizophrenia and demonstrated the effects of HSPA1A and HSPA1B genotypes on the psychopathology and age of onset. Our study provided the first evidence that the HSPA1A polymorphism may potentially increase the risk of developing paranoid schizophrenia. Further independent analyses in different populations to evaluate the role of gender are needed to replicate these results.

Factors influencing the surface quality of polished tool steels

International Nuclear Information System (INIS)

Rebeggiani, S; Rosén, B-G

2014-01-01

Today’s demands on surface quality of moulds for injection moulding of plastic components involve no/low defect contents and roughness levels in the nm-range for high gloss applications. Material properties as well as operating conditions influence the mould finish, and thus the final surface of moulded products. This paper focuses on how particle content and different polishing strategies influence final surface qualities of moulds. Visual estimations of polished tool steel samples were combined with non-contact 3D-surface texture analysis in order to correlate traditional assessments to more quantitative methods, and to be able to analyse the surfaces at nanometre-level. It was found that steels with a lower proportion of particles, like carbides and oxides, gave rise to smoother polished surfaces. In a comparative study of polishers from different polishing shops, it was found that while different surface preparation strategies can lead to similar final roughness, similar preparation techniques can produce high-quality surfaces from different steel grades. However, the non-contact 3D-surface texture analysis showed that not all smooth polished surfaces have desirable functional topographies for injection moulding of glossy plastic components. (paper)

New perspectives in hydrodynamic radial polishing techniques for optical surfaces

Science.gov (United States)

Ruiz, Elfego; Sohn, Erika; Luna, Esteban; Salas, Luis; Cordero, Alberto; González, Jorge; Núñez, Manuel; Salinas, Javier; Cruz-González, Irene; Valdés, Jorge; Cabrera, Victor; Martínez, Benjamín

2004-09-01

In order to overcome classic polishing techniques, a novel hydrodynamic radial polishing tool (HyDRa) is presented; it is useful for the corrective lapping and fine polishing of diverse materials by means of a low-cost abrasive flux and a hydrostatic suspension system that avoids contact of the tool with the working surface. This tool enables the work on flat or curved surfaces of currently up to two and a half meters in diameter. It has the advantage of avoiding fallen edges during the polishing process as well as reducing tool wear out and deformation. The functioning principle is based on the generation of a high-velocity, high-pressure, abrasive emulsion flux with radial geometry. The polishing process is repeatable by means of the control of the tool operational parameters, achieving high degrees of precision and accuracy on optical and semiconductor surfaces, with removal rates of up to 9 mm3/hour and promising excellent surface polishing qualities. An additional advantage of this new tool is the possibility to perform interferometric measurements during the polishing process without the need of dismounting the working surface. A series of advantages of this method, numerical simulations and experimental results are described.

Recalibration of the ACC/AHA Risk Score in Two Population-Based German Cohorts.

Science.gov (United States)

de Las Heras Gala, Tonia; Geisel, Marie Henrike; Peters, Annette; Thorand, Barbara; Baumert, Jens; Lehmann, Nils; Jöckel, Karl-Heinz; Moebus, Susanne; Erbel, Raimund; Meisinger, Christine; Mahabadi, Amir Abbas; Koenig, Wolfgang

2016-01-01

The 2013 ACC/AHA guidelines introduced an algorithm for risk assessment of atherosclerotic cardiovascular disease (ASCVD) within 10 years. In Germany, risk assessment with the ESC SCORE is limited to cardiovascular mortality. Applicability of the novel ACC/AHA risk score to the German population has not yet been assessed. We therefore sought to recalibrate and evaluate the ACC/AHA risk score in two German cohorts and to compare it to the ESC SCORE. We studied 5,238 participants from the KORA surveys S3 (1994-1995) and S4 (1999-2001) and 4,208 subjects from the Heinz Nixdorf Recall (HNR) Study (2000-2003). There were 383 (7.3%) and 271 (6.4%) first non-fatal or fatal ASCVD events within 10 years in KORA and in HNR, respectively. Risk scores were evaluated in terms of calibration and discrimination performance. The original ACC/AHA risk score overestimated 10-year ASCVD rates by 37% in KORA and 66% in HNR. After recalibration, miscalibration diminished to 8% underestimation in KORA and 12% overestimation in HNR. Discrimination performance of the ACC/AHA risk score was not affected by the recalibration (KORA: C = 0.78, HNR: C = 0.74). The ESC SCORE overestimated by 5% in KORA and by 85% in HNR. The corresponding C-statistic was 0.82 in KORA and 0.76 in HNR. The recalibrated ACC/AHA risk score showed strongly improved calibration compared to the original ACC/AHA risk score. Predicting only cardiovascular mortality, discrimination performance of the commonly used ESC SCORE remained somewhat superior to the ACC/AHA risk score. Nevertheless, the recalibrated ACC/AHA risk score may provide a meaningful tool for estimating 10-year risk of fatal and non-fatal cardiovascular disease in Germany.

Transporter genes identified in landraces associated with high zinc in polished rice through panicle transcriptome for biofortification.

Directory of Open Access Journals (Sweden)

C N Neeraja

Full Text Available Polished rice is poor source of micronutrients, however wide genotypic variability exists for zinc uptake and remobilization and zinc content in brown and polished grains in rice. Two landraces (Chittimutyalu and Kala Jeera Joha and one popular improved variety (BPT 5204 were grown under zinc sufficient soil and their analyses showed high zinc in straw of improved variety, but high zinc in polished rice in landraces suggesting better translocation ability of zinc into the grain in landraces. Transcriptome analyses of the panicle tissue showed 41182 novel transcripts across three samples. Out of 1011 differentially expressed exclusive transcripts by two landraces, 311 were up regulated and 534 were down regulated. Phosphate transporter-exporter (PHO, proton-coupled peptide transporters (POT and vacuolar iron transporter (VIT showed enhanced and significant differential expression in landraces. Out of 24 genes subjected to quantitative real time analyses for confirmation, eight genes showed significant differential expression in landraces. Through mapping, six rice microsatellite markers spanning the genomic regions of six differentially expressed genes were validated for their association with zinc in brown and polished rice using recombinant inbred lines (RIL of BPT 5204/Chittimutyalu. Thus, this study reports repertoire of genes associated with high zinc in polished rice and a proof concept for deployment of transcriptome information for validation in mapping population and its use in marker assisted selection for biofortification of rice with zinc.

Original article Multidimensional versus unidimensional models of emotional contagion: the Emotional Contagion Scale in a Polish sample

Directory of Open Access Journals (Sweden)

Monika Wróbel

2014-07-01

Full Text Available Background The Emotional Contagion Scale (ECS measures individual differences in susceptibility to catching emotions expressed by others. Although initially the scale was reported to have a unidimensional structure, recent validation studies have suggested that the concept of emotional contagion is multidimensional. The aim of the study was therefore to test whether the structure of the ECS in a Polish sample corresponds with that observed for other non-English speaking populations. Participants and procedure The scale, translated into Polish, was completed by 633 university students in four independent samples. To investigate the factor structure of the ECS, confirmatory factor analyses of five alternative models were conducted. Results The results supported a multifaceted solution, which confirmed that susceptibility to emotional contagion may be differentiated not only across positive vs. negative states but also across discrete emotions. Moreover, the verification of internal consistency, test-retest reliability and construct validity of the Polish version indicated that its parameters are acceptable and comparable with the characteristics of other adaptations. Conclusions The Polish ECS, together with other adaptations of the scale, shows that the construct developed in the United States can be successfully measured in other cultural contexts. Thus, the Polish version can be treated as a useful tool for measuring individual differences in susceptibility to emotional contagion.

Transporter genes identified in landraces associated with high zinc in polished rice through panicle transcriptome for biofortification

Science.gov (United States)

Kulkarni, Kalyani S.; Madhu Babu, P.; Sanjeeva Rao, D.; Surekha, K.; Ravindra Babu, V

2018-01-01

Polished rice is poor source of micronutrients, however wide genotypic variability exists for zinc uptake and remobilization and zinc content in brown and polished grains in rice. Two landraces (Chittimutyalu and Kala Jeera Joha) and one popular improved variety (BPT 5204) were grown under zinc sufficient soil and their analyses showed high zinc in straw of improved variety, but high zinc in polished rice in landraces suggesting better translocation ability of zinc into the grain in landraces. Transcriptome analyses of the panicle tissue showed 41182 novel transcripts across three samples. Out of 1011 differentially expressed exclusive transcripts by two landraces, 311 were up regulated and 534 were down regulated. Phosphate transporter-exporter (PHO), proton-coupled peptide transporters (POT) and vacuolar iron transporter (VIT) showed enhanced and significant differential expression in landraces. Out of 24 genes subjected to quantitative real time analyses for confirmation, eight genes showed significant differential expression in landraces. Through mapping, six rice microsatellite markers spanning the genomic regions of six differentially expressed genes were validated for their association with zinc in brown and polished rice using recombinant inbred lines (RIL) of BPT 5204/Chittimutyalu. Thus, this study reports repertoire of genes associated with high zinc in polished rice and a proof concept for deployment of transcriptome information for validation in mapping population and its use in marker assisted selection for biofortification of rice with zinc. PMID:29394277

Transporter genes identified in landraces associated with high zinc in polished rice through panicle transcriptome for biofortification.

Science.gov (United States)

Neeraja, C N; Kulkarni, Kalyani S; Madhu Babu, P; Sanjeeva Rao, D; Surekha, K; Ravindra Babu, V

2018-01-01

Polished rice is poor source of micronutrients, however wide genotypic variability exists for zinc uptake and remobilization and zinc content in brown and polished grains in rice. Two landraces (Chittimutyalu and Kala Jeera Joha) and one popular improved variety (BPT 5204) were grown under zinc sufficient soil and their analyses showed high zinc in straw of improved variety, but high zinc in polished rice in landraces suggesting better translocation ability of zinc into the grain in landraces. Transcriptome analyses of the panicle tissue showed 41182 novel transcripts across three samples. Out of 1011 differentially expressed exclusive transcripts by two landraces, 311 were up regulated and 534 were down regulated. Phosphate transporter-exporter (PHO), proton-coupled peptide transporters (POT) and vacuolar iron transporter (VIT) showed enhanced and significant differential expression in landraces. Out of 24 genes subjected to quantitative real time analyses for confirmation, eight genes showed significant differential expression in landraces. Through mapping, six rice microsatellite markers spanning the genomic regions of six differentially expressed genes were validated for their association with zinc in brown and polished rice using recombinant inbred lines (RIL) of BPT 5204/Chittimutyalu. Thus, this study reports repertoire of genes associated with high zinc in polished rice and a proof concept for deployment of transcriptome information for validation in mapping population and its use in marker assisted selection for biofortification of rice with zinc.

Probabilistic dietary risk assessment of pesticide residues in foods for the German population based on food monitoring data from 2009 to 2014.

Science.gov (United States)

Sieke, Christian; Michalski, Britta; Kuhl, Thomas

2018-01-01

Dietary risks for the German population owing to pesticide residues in foods were assessed based on food monitoring data, consumption surveys for children and adults and compound specific toxicological reference values or general thresholds of toxicological concern. A tiered probabilistic modelling was conducted to screen 700 pesticides for significant long- and short-term dietary exposures. Especially for the short-term dietary exposure, the probabilistic methodology used allows simultaneous consideration of the complete daily consumption, whereas most regulatory bodies still rely on single commodity approaches. After screening, refined exposure assessments were conducted for 19 compounds under consideration of conversion factors for toxicologically relevant metabolites, processing information, experimentally derived variability factors and the edible portion for each food item. In total, for 693 compounds the dietary exposure was unlikely to present a chronic or acute public health concern for the German population. In contrast, the refined assessments indicate that the short-term dietary exposure for chlorpyrifos and the cumulative short-term dietary exposure for dimethoate and omethoate may present a public health concern. For copper, owing to exposure assessment limitations, as well as for dimethylvinphos, halfenprox and tricyclazole, which exceeded the thresholds of toxicological concern, the dietary risk assessment remained inconclusive.

Investigation of -308G>A and -1031T>C polymorphisms in the TNFA promoter region in Polish peptic ulcer patients.

Science.gov (United States)

Sałagacka, Aleksandra; Żebrowska, Marta; Jeleń, Agnieszka; Mirowski, Marek; Balcerczak, Ewa

2014-11-01

Tumor necrosis factor α (TNF-α) encoded by TNFA is a key mediator in inflammation, a precursor condition for peptic ulceration. Promoter polymorphisms of TNFA that influence its transcriptional activity and TNF-α production are known. TNFA-308G>A (rs1800629) and TNFA-1031T>C (rs1799964), which are responsible for increased TNFA transcription, could influence the risk of peptic ulceration. This study aimed to investigate these polymorphisms and to evaluate their association with peptic ulcer disease and Helicobacter pylori infection in the Polish population. Gastric mucosa specimens obtained from 177 Polish peptic ulcer patients were used to conduct rapid urease tests and to assess the investigated polymorphisms by polymerase chain reaction-restriction fragment length polymorphism. Genotyping data were compared with the results obtained from healthy individuals of Polish origin. There were no significant differences in genotype and allele frequency of the investigated polymorphisms between peptic ulcer patients and healthy individuals. No associations between the frequencies of particular genotypes and alleles for both single-nucleotide polymorphisms (SNPs) and the presence of H. pylori infection in peptic ulcer patients and in subgroups of men and women with peptic ulcer disease were found. The investigated SNPs are not risk factors for either peptic ulcer or H. pylori infection development in the Polish population. The results require verification in a larger cohort.

Damage-free polishing of monocrystalline silicon wafers without chemical additives

International Nuclear Information System (INIS)

Biddut, A.Q.; Zhang, L.C.; Ali, Y.M.; Liu, Z.

2008-01-01

This investigation explores the possibility and identifies the mechanism of damage-free polishing of monocrystalline silicon without chemical additives. Using high resolution electron microscopy and contact mechanics, the study concludes that a damage-free polishing process without chemicals is feasible. All forms of damages, such as amorphous Si, dislocations and plane shifting, can be eliminated by avoiding the initiation of the β-tin phase of silicon during polishing. When using 50 nm abrasives, the nominal pressure to achieve damage-free polishing is 20 kPa

Computer-Controlled Cylindrical Polishing Process for Large X-Ray Mirror Mandrels

Science.gov (United States)

Khan, Gufran S.; Gubarev, Mikhail; Speegle, Chet; Ramsey, Brian

2010-01-01

We are developing high-energy grazing incidence shell optics for hard-x-ray telescopes. The resolution of a mirror shells depends on the quality of cylindrical mandrel from which they are being replicated. Mid-spatial-frequency axial figure error is a dominant contributor in the error budget of the mandrel. This paper presents our efforts to develop a deterministic cylindrical polishing process in order to keep the mid-spatial-frequency axial figure errors to a minimum. Simulation software is developed to model the residual surface figure errors of a mandrel due to the polishing process parameters and the tools used, as well as to compute the optical performance of the optics. The study carried out using the developed software was focused on establishing a relationship between the polishing process parameters and the mid-spatial-frequency error generation. The process parameters modeled are the speeds of the lap and the mandrel, the tool s influence function, the contour path (dwell) of the tools, their shape and the distribution of the tools on the polishing lap. Using the inputs from the mathematical model, a mandrel having conical approximated Wolter-1 geometry, has been polished on a newly developed computer-controlled cylindrical polishing machine. The preliminary results of a series of polishing experiments demonstrate a qualitative agreement with the developed model. We report our first experimental results and discuss plans for further improvements in the polishing process. The ability to simulate the polishing process is critical to optimize the polishing process, improve the mandrel quality and significantly reduce the cost of mandrel production

Language-related differential item functioning between English and German PROMIS Depression items is negligible.

Science.gov (United States)

Fischer, H Felix; Wahl, Inka; Nolte, Sandra; Liegl, Gregor; Brähler, Elmar; Löwe, Bernd; Rose, Matthias

2017-12-01

To investigate differential item functioning (DIF) of PROMIS Depression items between US and German samples we compared data from the US PROMIS calibration sample (n = 780), a German general population survey (n = 2,500) and a German clinical sample (n = 621). DIF was assessed in an ordinal logistic regression framework, with 0.02 as criterion for R 2 -change and 0.096 for Raju's non-compensatory DIF. Item parameters were initially fixed to the PROMIS Depression metric; we used plausible values to account for uncertainty in depression estimates. Only four items showed DIF. Accounting for DIF led to negligible effects for the full item bank as well as a post hoc simulated computer-adaptive test (German general population sample was considerably lower compared to the US reference value of 50. Overall, we found little evidence for language DIF between US and German samples, which could be addressed by either replacing the DIF items by items not showing DIF or by scoring the short form in German samples with the corrected item parameters reported. Copyright © 2016 John Wiley & Sons, Ltd.

Strain-free polished channel-cut crystal monochromators: a new approach and results

Science.gov (United States)

Kasman, Elina; Montgomery, Jonathan; Huang, XianRong; Lerch, Jason; Assoufid, Lahsen

2017-08-01

The use of channel-cut crystal monochromators has been traditionally limited to applications that can tolerate the rough surface quality from wet etching without polishing. We have previously presented and discussed the motivation for producing channel cut crystals with strain-free polished surfaces [1]. Afterwards, we have undertaken an effort to design and implement an automated machine for polishing channel-cut crystals. The initial effort led to inefficient results. Since then, we conceptualized, designed, and implemented a new version of the channel-cut polishing machine, now called C-CHiRP (Channel-Cut High Resolution Polisher), also known as CCPM V2.0. The new machine design no longer utilizes Figure-8 motion that mimics manual polishing. Instead, the polishing is achieved by a combination of rotary and linear functions of two coordinated motion systems. Here we present the new design of C-CHiRP, its capabilities and features. Multiple channel-cut crystals polished using the C-CHiRP have been deployed into several beamlines at the Advanced Photon Source (APS). We present the measurements of surface finish, flatness, as well as topography results obtained at 1-BM of APS, as compared with results typically achieved when polishing flat-surface monochromator crystals using conventional polishing processes. Limitations of the current machine design, capabilities and considerations for strain-free polishing of highly complex crystals are also discussed, together with an outlook for future developments and improvements.

Occurrence and prevalence of selected zoonotic agents: Echinococcus multilocularis, Trichinella spiralis and hepatitis E virus (HEV) in the population of Polish hunters--results of the study conducted in 2010-2012.

Science.gov (United States)

Sadkowska-Todys, Małgorzata; Baumann-Popczyk, Anna; Wnukowska, Natalia; Popczyk, Bartłomiej; Kucharczyk, Bożena; Gołąb, Elżbieta

2015-01-01

In Poland the development of the knowledge concerning zoonotic pathogens, of which free-living animals are the reservoir of is gaining in importance both in epidemiological aspect as well as in the context of prevention for improving public health. Dietary habits such as the consumption of forest undergrowth products and wild game meat, and the way of those products being prepared (in the process of barbequing) pose a risk factors of infection with the foodborne pathogens such as Echinococcus multilocularis, Trichinella spp., and HEV. The aim of this study is to estimate the prevalence of infections caused by Trichinella spp., Echinococcus multilocularis, and HEV in the population of Polish hunters, describing their geographical distribution in Poland, and to try to define basic factors, which may contribute to their occurrence. In 2010-2012 a cross-sectional study was carried out among Polish hunters. A blood samples were collected as well as a survey of 1027 participants recruited in the 16 provinces was also carried out. Serological tests were performed for the presence of specific antibodies against Echinococcus multilocularis, Trichinella spp. and HEV using commercial or "in home" ELISA tests. In case of positive result for Echinococcus, an Em2plus ELISA or/and western blot test were carried out, and for positive results for IgM for HEV a recomLine HEV IgM test was carried out. In the studied population a total number of 2 cases of Echinococcus multilocularis infection were found. Moreover in 47 (4,6%) participants presence of antibodies against Trichinella spp. were found, including 17 positive and 30 borderline results. In 206 persons (25%) IgG anti-HEV antibodies were found (by ELISA test). Geographical diversity in prevalence of both, the Trichinella spp. and HEV cases was observed. The study confirmed presence of zoonotic infections such as Echinococcus multilocularis, Trichinella spp., and hepatitis E (HEV) among Polish hunters. In the case of

Can Reduced-Step Polishers Be as Effective as Multiple-Step Polishers in Enhancing Surface Smoothness?

Science.gov (United States)

Kemaloglu, Hande; Karacolak, Gamze; Turkun, L Sebnem

2017-02-01

The aim of this study was to evaluate the effects of various finishing and polishing systems on the final surface roughness of a resin composite. Hypotheses tested were: (1) reduced-step polishing systems are as effective as multiple-step systems on reducing the surface roughness of a resin composite and (2) the number of application steps in an F/P system has no effect on reducing surface roughness. Ninety discs of a nano-hybrid resin composite were fabricated and divided into nine groups (n = 10). Except the control, all of the specimens were roughened prior to be polished by: Enamel Plus Shiny, Venus Supra, One-gloss, Sof-Lex Wheels, Super-Snap, Enhance/PoGo, Clearfil Twist Dia, and rubber cups. The surface roughness was measured and the surfaces were examined under scanning electron microscope. Results were analyzed with analysis of variance and Holm-Sidak's multiple comparisons test (p One-gloss, Enamel Plus Shiny, and Venus Supra groups. (1) The number of application steps has no effect on the performance of F/P systems. (2) Reduced-step polishers used after a finisher can be preferable to multiple-step systems when used on nanohybrid resin composites. (3) The effect of F/P systems on surface roughness seems to be material-dependent rather than instrument- or system-dependent. Reduced-step systems used after a prepolisher can be an acceptable alternative to multiple-step systems on enhancing the surface smoothness of a nanohybrid composite; however, their effectiveness depends on the materials' properties. (J Esthet Restor Dent 29:31-40, 2017). © 2016 Wiley Periodicals, Inc.

Does Grammatical Gender Influence Perception? A Study of Polish and French Speakers

Directory of Open Access Journals (Sweden)

Haertlé Izabella

2017-12-01

Full Text Available Can the perception of a word be influenced by its grammatical gender? Can it happen that speakers of one language perceive an object to have masculine features, while speakers of another language perceive the same object to have feminine features? Previous studies suggest that this is the case, and also that there is some supra-language gender categorisation of objects as natural/feminine and artefact/masculine. This study was an attempt to replicate these findings on another population of subjects. This is the first Polish study of this kind, comparing the perceptions of objects by Polish- and French-speaking individuals. The results of this study show that grammatical gender may cue people to assess objects as masculine or feminine. However, the findings of some previous studies, that feminine features are more often ascribed to natural objects than artifacts, were not replicated.

Personality factors and suicide risk in a representative sample of the German general population.

Directory of Open Access Journals (Sweden)

Victor Blüml

Full Text Available OBJECTIVE: Previous research has shown an association between certain personality characteristics and suicidality. Methodological differences including small sample sizes and missing adjustment for possible confounding factors could explain the varying results. The aim of this study was to assess the impact of the Big Five personality dimensions on suicidality in a representative population based sample of adults. METHOD: Interviews were conducted in a representative German population-based sample (n=2555 in 2011. Personality characteristics were assessed using the Big Five Inventory-10 (BFI-10 and suicide risk was assessed with the Suicidal Behaviors Questionnaire-Revised (SBQ-R. Multivariate logistic regression models were calculated adjusting for depression, anxiety, and various sociodemographic variables. RESULTS: Neuroticism and openness were significantly associated with suicide risk, while extraversion and conscientiousness were found to be protective. Significant sex differences were observed. For males, extraversion and conscientiousness were protective factors. Neuroticism and openness were found to be associated with suicide risk only in females. These associations remained significant after adjusting for covariates. CONCLUSION: The results highlight the role of personality dimensions as risk factors for suicide-related behaviors. Different personality dimensions are significantly associated with suicide-related behaviors even when adjusting for other known risk factors of suicidality.

Surface geometry of three packable and one hybrid composite after polishing.

Science.gov (United States)

Jung, Martin; Bruegger, Hilka; Klimek, Joachim

2003-01-01

This study evaluated the surface quality of four composite materials after polishing with six different polishing techniques. Eighty specimens were made using three packable composites (Definite/Degussa, SureFil/ Dentsply and Solitaire/Heraeus-Kulzer) and one hybrid composite (Herculite XRV/Kerr). Five specimens of each material were polished using flexible Sof-Lex discs. The remaining 75 specimens of each composite were prepared using three finishing protocols: a single 30 microm diamond (n = 25), two finishing diamonds (30/20 microm; n = 25) and a 30 microm diamond followed by a tungsten carbide finishing bur (n = 25). Final polishing of each of the three finishing groups was accomplished with SuperBuff, Diafix-oral, OneGloss, Astropol and HaWe Composite Polishers (n = 5, each). Surface roughness was evaluated quantitatively by laser-stylus profilometry. Average roughness (R(a)) was calculated; statistical analysis of the data was performed with two-way ANOVA and Scheffé post-hoc tests. The polished surfaces were examined qualitatively by SEM. The results showed significant effects on surface roughness from the different composites (p = 0.011) and polishing systems (p < 0.001). After polishing, the Solitaire surfaces (R(a) = 0.72 microm) were smoother than Definite (R(a) = 0.87 microm) and SureFil (R(a) = 0.89 microm) and significantly smoother than Herculite (R(a) = 0.92 microm; p = 0.011). Three of the polishing methods (SuperBuff, Diafix-oral and Astropol) achieved lower R(a)-values than Sof-Lex discs. The polishing quality of the one-step systems SuperBuff and Diafix-oral was strongly affected by the initial finishing protocol.

Study of Profile Changes during Mechanical Polishing using Relocation Profilometry

Science.gov (United States)

Kumaran, S. Chidambara; Shunmugam, M. S.

2017-10-01

Mechanical polishing is a finishing process practiced conventionally to enhance quality of surface. Surface finish is improved by mechanical cutting action of abrasive particles on work surface. Polishing is complex in nature and research efforts have been focused on understanding the polishing mechanism. Study of changes in profile is a useful method of understanding behavior of the polishing process. Such a study requires tracing same profile at regular process intervals, which is a tedious job. An innovative relocation technique is followed in the present work to study profile changes during mechanical polishing of austenitic stainless steel specimen. Using special locating fixture, micro-indentation mark and cross-correlation technique, the same profile is traced at certain process intervals. Comparison of different parameters of profiles shows the manner in which metal removal takes place in the polishing process. Mass removal during process estimated by the same relocation technique is checked with that obtained using weight measurement. The proposed approach can be extended to other micro/nano finishing processes and favorable process conditions can be identified.

Terminologia anatomica in the past and the future from perspective of 110th anniversary of Polish Anatomical Terminology.

Science.gov (United States)

Gielecki, J; Zurada, A; Osman, N

2008-05-01

Professional terminology is commonplace, particularly in the fields of mathematics, medicine, veterinary and natural sciences. The use of the terminology can be international, as it is with Anatomical Terminology (AT). In the early age of modern education, anatomists adopted Latin as the international language for AT. However, at the end of the 20th century, the English language became more predominant around the world. It can be said that the AT is a specific collection of scientific terms. One of the major flaws in early AT was that body structures were described by varying names, while some of the terms was irrational in nature, and confusing. At this time, different international committees were working on preparing a unified final version of the AT, which in the end consisted of 5,640 terms (4,286 originally from the Basle Nomina Anatomica, BNA). Also, each country wanted to have its own nomenclature. In order to accomplish this, each country based their nomenclature on the international AT, and then translated it into their own language. The history of the Polish Anatomical Terminology (PAT) is unique, and follows the events of history. It was first published in 1898, at a time when its neighbours partitioned the territory of Poland. During 150 years, the Polish culture and language was under the Russification and Germanization policy. It is important to note, that even with such difficult circumstances, the PAT was the first national AT in the world. The PAT was a union of the accepted first BNA in Latin and the original Polish anatomical equivalents. This union formed the basis for theoretical and clinical medicine in Poland.

Development of hybrid fluid jet/float polishing process

Science.gov (United States)

Beaucamp, Anthony T. H.; Namba, Yoshiharu; Freeman, Richard R.

2013-09-01

On one hand, the "float polishing" process consists of a tin lap having many concentric grooves, cut from a flat by single point diamond turning. This lap is rotated above a hydrostatic bearing spindle of high rigidity, damping and rotational accuracy. The optical surface thus floats above a thin layer of abrasive particles. But whilst surface texture can be smoothed to ~0.1nm rms (as measured by atomic force microscopy), this process can only be used on flat surfaces. On the other hand, the CNC "fluid jet polishing" process consists of pumping a mixture of water and abrasive particles to a converging nozzle, thus generating a polishing spot that can be moved along a tool path with tight track spacing. But whilst tool path feed can be moderated to ultra-precisely correct form error on freeform optical surfaces, surface finish improvement is generally limited to ~1.5nm rms (with fine abrasives). This paper reports on the development of a novel finishing method, that combines the advantages of "fluid jet polishing" (i.e. freeform corrective capability) with "float polishing" (i.e. super-smooth surface finish of 0.1nm rms or less). To come up with this new "hybrid" method, computational fluid dynamic modeling of both processes in COMSOL is being used to characterize abrasion conditions and adapt the process parameters of experimental fluid jet polishing equipment, including: (1) geometrical shape of nozzle, (2) position relative to the surface, (3) control of inlet pressure. This new process is aimed at finishing of next generation X-Ray / Gamma Ray focusing optics.

Eat healthy? Attitudes of the German population towards industrially produced cardioprotective food.

Science.gov (United States)

Jung, F U C E; Luck-Sikorski, C; Krüger, M; Wiacek, C; Braun, P G; Engeli, S; Riedel-Heller, S G

2018-05-01

Cardiovascular disease (CVD) is likely to increase in incidence. Foods with cardioprotective functions, e.g. specific functional food, could reduce CVD risk factors and hence CVD incidence. Little is known about industrially modified foods with cardioprotective functions. In a large German sample (n = 1007), attitudes of consumers in Germany towards industrially produced cardioprotective food were assessed using Cluster analyses. Consumers were contacted via telephone and interviewed using questionnaires. Overall, about 25% knew about industrially produced food with cardioprotective function. Our analysis revealed a small but determined group of consumers who think very skeptical about cardioprotective products, but we also identified a favorable group. These two groups only differed in age, with the skeptical group being ten years older. The rising number of industrially modified products with potential cardioprotective benefit is met by skepticism and a lack of knowledge by German costumers. If large scale studies show health benefits of these products, these will need to be better communicated to German customers in order to address possible doubts or concerns and to encourage healthy eating habits in consumer eating behavior. Copyright © 2018 The Italian Society of Diabetology, the Italian Society for the Study of Atherosclerosis, the Italian Society of Human Nutrition, and the Department of Clinical Medicine and Surgery, Federico II University. Published by Elsevier B.V. All rights reserved.

Sensory factors affecting female consumers' acceptability of nail polish.

Science.gov (United States)

Sun, C; Koppel, K; Adhikari, K

2015-12-01

The objectives of this study were to determine what sensory factors impact consumers' acceptability of nail polishes, to explore how these sensory factors impact consumers' acceptability of nail polishes, to investigate whether there are any consumer segments according to their overall acceptability on different nail polishes and to scrutinize how the consumer segments are related to the sensory factors. Ninety-eight females participated in a nail polish consumer study at Kansas State University. Eight commercial products belonging to four categories - regular (REG), gel (GEL), flake (FLK) and water-based (WAT) - were evaluated. Each nail polish sample was evaluated twice by each participant in two different tasks - a task devoted to applying and evaluating the product and a task devoted to observing the appearance and evaluating the product. Pearson's correlation analysis, analysis of variance (ANOVA), external preference mapping, cluster analysis and internal preference mapping were applied for data analysis. Participants' scores of overall liking of the nail polishes were similar in the application task and in the observation task. In general, participants liked the REG and GEL product samples more than the FLK and WAT samples. Among all the sensory attributes, appearance attributes were the major factors that affected participants' overall liking. Aroma seemed to be a minor factor to participants' overall liking. Some sensory attributes, such as runny, shininess, opacity, spreadability, smoothness, coverage and wet appearance, were found to drive participants' overall acceptability positively, whereas others such as pinhole, fatty-edges, blister, brushlines, pearl-like, flake-protrusion, glittery and initial-drag impacted participants' overall acceptability negatively. Four clusters of participants were identified according to their overall liking scores from both the application task and the observation task. Participants' acceptability, based on different

Note on the polishing of small spheres of ferrimagnetic materials

Energy Technology Data Exchange (ETDEWEB)

Grunberg, J. G.; Antier, G. [Centre d' etudes nucleaires de Grenoble - C.E.N.G. (France); Seiden, P. E. [Institut Fourier, Universite de Grenoble (France)

1961-07-01

This note describes a simple and rapid method that we have used for obtaining a high degree of polish on spheres of ferrimagnetic materials. A high surface polish is of particular importance if one desires to perform ferrimagnetic resonance experiments on very narrow linewidth materials such as Yttrium Iron Garnet. It is not possible to obtain the very narrow linewidths without polishing the sample with a very fine abrasive such as 'Linde A'. Although the methods presently used for the fine polishing of ferrite spheres give satisfactory results, the method described here is of particular interest because of its simplicity and speed. For example with the air-jet tumbling technique it can take as long as three days of polishing to obtain an acceptable surface while our method will give the same results in one to two hours. (author)

Polish energy-system modernisation

International Nuclear Information System (INIS)

Drozdz, M.

2003-01-01

The Polish energy-system needs intensive investments in new technologies, which are energy efficient, clean and cost effective. Since the early 1990s, the Polish economy has had practically full access to modern technological devices, equipment and technologies. Introducing new technologies is a difficult task for project teams, constructors and investors. The author presents a set of principles for project teams useful in planning and energy modernisation. Several essential features are discussed: Energy-efficient appliances and systems; Choice of energy carriers, media and fuels; Optimal tariffs, maximum power and installed power; Intelligent, integrated, steering systems; Waste-energy recovery; Renewable-energy recovery. In practice there are several difficulties connected with planning and realising good technological and economic solutions. The author presents his own experiences of energy-system modernisation of industrial processes and building new objects. (Author)

Initial polishing time affects gloss retention in resin composites.

Science.gov (United States)

Waheeb, Nehal; Silikas, Nick; Watts, David

2012-10-01

To determine the effect of finishing and polishing time on the surface gloss of various resin-composites before and after simulated toothbrushing. Eight representative resin-composites (Ceram X mono, Ceram X duo, Tetric EvoCeram, Venus Diamond, EsteliteSigma Quick, Esthet.X HD, Filtek Supreme XT and Spectrum TPH) were used to prepare 80 disc-shaped (12 mm x 2 mm) specimens. The two step system Venus Supra was used for polishing the specimens for 3 minutes (Group A) and 10 minutes (Group B). All specimens were subjected to 16,000 cycles of simulated toothbrushing. The surface gloss was measured after polishing and after brushing using the gloss meter. Results were evaluated using one way ANOVA, two ways ANOVA and Dennett's post hoc test (P = 0.05). Group B (10-minute polishing) resulted in higher gloss values (GV) for all specimens compared to Group A (3 minutes). Also Group B showed better gloss retention compared to Group A after simulated toothbrushing. In each group, there was a significant difference between the polished composite resins (P gloss after the simulated toothbrushing.

[Doctors in Bydgoszcz 1815-1920].

Science.gov (United States)

Korpalska, W

2000-01-01

In the second half of the 19th century the number of Polish doctors in Pomerania increased significantly. They constituted a major group among the freelance professions within the Polish intelligentsia. The development of the Polish intelligentsia took place during a period of strong conflict between the two cultures and under increasing German influence. This was especially noticeable in Bydgoszcz which was one of the main centers of German culture in Provinz Posen. The growing wealth of the capitalistic society, as well as the development of medical science, created a greater demand for medical care. Medicine was the most liberated profession, which made it more independent from the German administration and this, in turn, made it more accessible to the Polish community.

The German version of the Material Values Scale.

Science.gov (United States)

Müller, Astrid; Smits, Dirk J M; Claes, Laurence; Gefeller, Olaf; Hinz, Andreas; de Zwaan, Martina

2013-01-01

The Material Values Scale is an instrument to assess beliefs about the importance to own material things. This instrument originally consists of the three subscales: 'centrality', 'success', and 'happiness'. The present study investigated the psychometric properties of the German version of the MVS (G-MVS). A population-based sample of 2,295 adult Germans completed the questionnaire in order to investigate the factorial structure. To test construct validity, additional samples were gathered among patients with compulsive buying (N=52) and medical students (N=347) who also answered the Compulsive Buying Scale (CBS) and the Patient Health Questionnaire depression scale (PHQ-8). In the German population-based sample we could not confirm the 3-factor model but rather suggest a 2-factor solution with a first collapsed factor 'centrality/success', and the second factor 'happiness'. Patients with compulsive buying showed the highest scores on the G-MVS. While G-MVS scores among compulsive buyers and medical students were significantly related to compulsive buying scores, the correlation between the G-MVS and the depression measure appeared substantially lower. We did not find any gender differences regarding materialism, neither in the population-based sample nor in the students' or compulsive buyers' samples. However, age was negatively related to G-MVS scores. Confirmatory factor analyses suggest a 2-factor model of the G-MVS. Overall, the results indicate the use of the G-MVS as a brief, psychometrically sound, and potentially valid measure for the assessment of material values.

Novel cavitation fluid jet polishing process based on negative pressure effects.

Science.gov (United States)

Chen, Fengjun; Wang, Hui; Tang, Yu; Yin, Shaohui; Huang, Shuai; Zhang, Guanghua

2018-04-01

Traditional abrasive fluid jet polishing (FJP) is limited by its high-pressure equipment, unstable material removal rate, and applicability to ultra-smooth surfaces because of the evident air turbulence, fluid expansion, and a large polishing spot in high-pressure FJP. This paper presents a novel cavitation fluid jet polishing (CFJP) method and process based on FJP technology. It can implement high-efficiency polishing on small-scale surfaces in a low-pressure environment. CFJP uses the purposely designed polishing equipment with a sealed chamber, which can generate a cavitation effect in negative pressure environment. Moreover, the collapse of cavitation bubbles can spray out a high-energy microjet and shock wave to enhance the material removal. Its feasibility is verified through researching the flow behavior and the cavitation results of the negative pressure cavitation machining of pure water in reversing suction flow. The mechanism is analyzed through a computational fluid dynamics simulation. Thus, its cavitation and surface removal mechanisms in the vertical CFJP and inclined CFJP are studied. A series of polishing experiments on different materials and polishing parameters are conducted to validate its polishing performance compared with FJP. The maximum removal depth increases, and surface roughness gradually decreases with increasing negative outlet pressures. The surface becomes smooth with the increase of polishing time. The experimental results confirm that the CFJP process can realize a high material removal rate and smooth surface with low energy consumption in the low-pressure environment, together with compatible surface roughness to FJP. Copyright © 2017 Elsevier B.V. All rights reserved.

Presentation of the verbs in Bulgarian-Polish electronic dictionary

Directory of Open Access Journals (Sweden)

Ludmila Dimitrova

2014-09-01

Full Text Available Presentation of the verbs in Bulgarian-Polish electronic dictionary This paper briefly discusses the presentation of the verbs in the first electronic Bulgarian-Polish dictionary that is currently being developed under a bilateral collaboration between IMI-BAS and ISS-PAS. Special attention is given to the digital entry classifiers that describe Bulgarian and Polish verbs. Problems related to the correspondence between natural language phenomena and their presentations are discussed. Some examples illustrate the different types of dictionary entries for verbs.

"Agricultural budget" and the competitiveness of the Polish agriculture

OpenAIRE

Lenkiewicz, Stanisław; Rokicki, Bartłomiej

2014-01-01

The aim of the publication is to assess the impact of public support on the functioning of the Polish agriculture. In order to achieve this aim the publication includes an analysis of the system of direct payments and rural development policy instruments planned to be implemented in Poland within the CAP 2014-2020. The study also presents an analysis of regional diversity of the Polish agriculture and an assessment of the scale of agricultural investment made in recent years in all the Polish...

Incidence of migraine and tension-type headache in three different populations at risk within the German DMKG headache study.

Science.gov (United States)

Khil, Laura; Pfaffenrath, Volker; Straube, Andreas; Evers, Stefan; Berger, Klaus

2012-03-01

Unlike the prevalence, the incidence of headache disorders has attracted only little attention in epidemiological research. Different definitions of the 'population at risk' among the few published migraine and tension-type headache incidence studies limit their comparability and warrant further research. Therefore, we analysed data from the German Migraine and Headache Society (DMKG). Incidences were assessed in the general population in Germany via standardized headache questions using the International Classification of Headache Disorders, 2nd Edition (ICHD-2). The population was drawn from a 5-year age-group- stratified and gender-stratified random sample from the population register. Of the 1312 baseline participants examined between 2003 and 2004, 1122 (85.5%) participated in the follow-up in 2006 and were the basis for three different populations at risk. We found that the three populations differed in size, age, gender and incidence estimate. The total sample incidence of migraine ranged between 0% and 3.3% and of tension-type headache between 5.3% and 9.2% depending on the definition of 'at risk'. We concluded that one significant problem in headache incidence estimation is the definition of 'at risk', limiting comparability. Thus, this study supports the need for a common definition for prospective headache incidence estimations.

Computer-Controlled Cylindrical Polishing Process for Development of Grazing Incidence Optics for Hard X-Ray Region

Science.gov (United States)

Khan, Gufran Sayeed; Gubarev, Mikhail; Speegle, Chet; Ramsey, Brian

2010-01-01

The presentation includes grazing incidence X-ray optics, motivation and challenges, mid spatial frequency generation in cylindrical polishing, design considerations for polishing lap, simulation studies and experimental results, future scope, and summary. Topics include current status of replication optics technology, cylindrical polishing process using large size polishing lap, non-conformance of polishin lap to the optics, development of software and polishing machine, deterministic prediction of polishing, polishing experiment under optimum conditions, and polishing experiment based on known error profile. Future plans include determination of non-uniformity in the polishing lap compliance, development of a polishing sequence based on a known error profile of the specimen, software for generating a mandrel polishing sequence, design an development of a flexible polishing lap, and computer controlled localized polishing process.

Effects of Polishing Bur Application Force and Reuse on Sintered Zirconia Surface Topography.

Science.gov (United States)

Fischer, N G; Tsujimoto, A; Baruth, A G

2018-03-16

Limited information is available on how to polish and finish zirconia surfaces following computer-aided design/computer-aided manufacturing (CAD/CAM), specifically, how differing application forces and reuse of zirconia polishing systems affect zirconia topography. To determine the effect of differing, clinically relevant, polishing application forces and multiple usages of polishing burs on the surface topography of CAD/CAM zirconia. One hundred twenty 220-grit carbide finished zirconia disks were sintered according to manufacturer's directions and divided into two groups for the study of two coarse polishing bur types. Each group was divided into subgroups for polishing (15,000 rpm) at 15 seconds for 1.0 N, 4.5 N, or 11 N of force using a purpose-built fixture. Subgroups were further divided to study the effects of polishing for the first, fifth, 15th, and 30th bur use, simulating clinical procedures. Unpolished surfaces served as a control group. Surfaces were imaged with noncontact optical profilometry (OP) and atomic force microscopy (AFM) to measure average roughness values (Ra). Polishing burs were optically examined for wear. Scanning electron microscopy (SEM) was performed on burs and zirconia surfaces. One-way ANOVA with post hoc Tukey HSD (honest significant difference) tests (α=0.05) were used for statistical analyses. AFM and OP Ra values of all polished surfaces were significantly lower than those of the unpolished control. Different polishing forces and bur reuse showed no significant differences in AFM Ra. However, significant differences in OP Ra were found due to differing application forces and bur reuse between the first and subsequent uses. SEM and optical micrographs revealed notable bur wear, increasing with increasing reuse. SEM and AFM micrographs clearly showed polished, periodic zirconia surfaces. Nanoscale topography, as analyzed with kurtosis and average groove depth, was found dependent on the specific polishing bur type. These in

The Czechoslovak-Polish Club in Brno (1925–1939)

Czech Academy of Sciences Publication Activity Database

Baron, Roman

2011-01-01

Roč. 3, č. 1 (2011), s. 43-64 ISSN 1803-6546 Institutional research plan: CEZ:AV0Z80150510 Keywords : Czechoslovak-Polish solidarity * Czechoslovak-Polish relations * Brno * associations * Interwar Period Subject RIV: AB - History

Performance test of condensate polishing system for Qinshan Nuclear Power Plant

International Nuclear Information System (INIS)

You Zhaojin; Qian Shijun; Lu Ruiting

1995-11-01

The flow chart, resin performance and water quality specifications of the condensate polishing system for Qinshan Nuclear Power Plant (QNPP) are briefly described. The initial regeneration process and the following service of the condensate polishing system are introduced. And the ability to remove corrosion products and ionic impurities of the condensate polishing system are verified during start-up, normal power operation and condenser leakage of the plant. The result shows that the performance of condensate polishing system in QNPP can completely meet the design requirements. Especially during the start-up of the unit or the leakage of the condenser, despite the inlet water quality of the polishers is far worse than the specified standard, the outlet water quality is still controlled within the indexes. Finally, several existing problems, such as 'volume ratio between resins is not optimum' and 'the inert resin and anion resin can not be stratified completely', in the condensate polishing system are also discussed. (4 refs., 1 fig., 8 tabs.)

Influence of polishing on surface roughness following toothbrushing wear of composite resins.

Science.gov (United States)

Dalla-Vecchia, Karine Battestin; Taborda, Talita Damas; Stona, Deborah; Pressi, Heloísa; Burnett Júnior, Luiz Henrique; Rodrigues-Junior, Sinval Adalberto

2017-01-01

This study aimed to evaluate the influence of different polishing systems on the surface roughness of composite resins following procedures to simulate the effects of toothbrushing over time. Four currently available commercial composites were used to make 128 cylindrical specimens. The specimens were randomly allocated to polishing with a 1-step polisher or 1 of 3 multistep polishers (n = 8 per group). The baseline surface roughness was measured, and the specimens were submitted to 5000, 10,000, and 20,000 brushing cycles to represent toothbrushing throughout 6, 12, and 24 months, respectively. Results showed that surface roughness was influenced by the type of composite and polishing system and was not influenced by the simulated toothbrushing time. However, the surface roughness, as challenged by toothbrushing wear, was affected by the interaction among the composite, the polisher, and the toothbrushing time. The 1-step polisher produced the highest surface roughness and influenced toothbrushing wear resistance of some composites.

Rare earth germanates

International Nuclear Information System (INIS)

Bondar', I.A.; Vinogradova, N.V.; Dem'yanets, L.N.

1983-01-01

Rare earth germanates attract close attention both as an independent class of compounds and analogues of a widely spread class of natural and synthetic minerals. The methods of rare earth germanate synthesis (solid-phase, hydrothermal) are considered. Systems on the basis of germanium and rare earth oxides, phase diagrams, phase transformations are studied. Using different chemical analysese the processes of rare earth germanate formation are investigated. IR spectra of alkali and rare earth metal germanates are presented, their comparative analysis being carried out. Crystal structures of the compounds, lattice parameters are studied. Fields of possible application of rare earth germanates are shown

Rare earth germanates

International Nuclear Information System (INIS)

Bondar', I.A.; Vinogradova, N.V.; Dem'yanets, L.N.

1983-01-01

From the viewpoint of structural chemistry and general regularities controlling formation reactions of compounds and phases in melts, solid and gaseous states, recent achievements in the chemistry of rare earth germanates are generalized. Methods of synthesizing germanates, systems on the base of germanium oxides and rare earths are considered. The data on crystallochemical characteristics are tabulated. Individual compounds of scandium germanate are also characterized. Processes of germanate formation using the data of IR-spectroscopy, X-ray phase analysis are studied. The structure and morphotropic series of rare earth germanates and silicates are determined. Fields of their present and possible future application are considered

Surface analysis of polished fused-silica laser lenses by ion-scattering spectrometry

International Nuclear Information System (INIS)

Orvek, K.; Steward, S.A.

1982-01-01

New advances in high-powered glass lasers, particularly the NOVA system, have resulted in a need for lenses having higher damage threshold values than those now available. It is currently thought that surface contaminants on the lenses are responsible for initiating part of the damage. These contaminants are apparently introduced during the final polishing stages. In this study, we used ion-scattering spectrometry (ISS) to identify contaminants arising through the use of different polishing techniques. Five lenses were studied, each having undergone different polishing procedures. The first lens was not polished after receiving it from the manfacturer (No. 381). Ion microprobe data were available for this lens, and they were compared to ISS results. The second lens had been polished with rouge, a polishing compound no longer in use (No. 796). This sample served as a further check on the ISS results. The third lens was studied as received from the manufacturer - with no handling or cleaning (No. 802). The final two lenses had both been polished using high-purity ceria, cerium oxide (No. 800 and No. 801). The difference between these two was that No. 800 was polished using a nylon lap, and No. 801 was polished using pitch as a lap. The 800-series lenses were all made from the same batch, and constituted the major part of the investigation

1.06 μm 150 psec laser damage study of diamond turned, diamond turned/polished and polished metal mirrors

International Nuclear Information System (INIS)

Saito, T.T.; Milam, D.; Baker, P.; Murphy, G.

1975-01-01

Using a well characterized 1.06 μm 150 ps glass laser pulse the damage characteristics for diamond turned, diamond turned/ polished, and polished copper and silver mirrors less than 5 cm diameter were studied. Although most samples were tested with a normal angle of incidence, some were tested at 45 0 with different linear polarization showing an increase in damage threshold for S polarization. Different damage mechanisms observed will be discussed. Laser damage is related to residual surface influences of the fabrication process. First attempts to polish diamond turned surfaces resulted in a significant decrease in laser damage threshold. The importance of including the heat of fusion in the one dimensional heat analysis of the theoretical damage threshold and how close the samples came to the theoretical damage threshold is discussed. (auth)

The study of optimization on process parameters of high-accuracy computerized numerical control polishing

Science.gov (United States)

Huang, Wei-Ren; Huang, Shih-Pu; Tsai, Tsung-Yueh; Lin, Yi-Jyun; Yu, Zong-Ru; Kuo, Ching-Hsiang; Hsu, Wei-Yao; Young, Hong-Tsu

2017-09-01

Spherical lenses lead to forming spherical aberration and reduced optical performance. Consequently, in practice optical system shall apply a combination of spherical lenses for aberration correction. Thus, the volume of the optical system increased. In modern optical systems, aspherical lenses have been widely used because of their high optical performance with less optical components. However, aspherical surfaces cannot be fabricated by traditional full aperture polishing process due to their varying curvature. Sub-aperture computer numerical control (CNC) polishing is adopted for aspherical surface fabrication in recent years. By using CNC polishing process, mid-spatial frequency (MSF) error is normally accompanied during this process. And the MSF surface texture of optics decreases the optical performance for high precision optical system, especially for short-wavelength applications. Based on a bonnet polishing CNC machine, this study focuses on the relationship between MSF surface texture and CNC polishing parameters, which include feed rate, head speed, track spacing and path direction. The power spectral density (PSD) analysis is used to judge the MSF level caused by those polishing parameters. The test results show that controlling the removal depth of single polishing path, through the feed rate, and without same direction polishing path for higher total removal depth can efficiently reduce the MSF error. To verify the optical polishing parameters, we divided a correction polishing process to several polishing runs with different direction polishing paths. Compare to one shot polishing run, multi-direction path polishing plan could produce better surface quality on the optics.

Electrolytic polishing system for space age materials

International Nuclear Information System (INIS)

Coons, W.C.; Iosty, L.R.

1976-01-01

A simple electrolytic polishing technique was developed for preparing Cr, Co, Hf, Mo, Ni, Re, Ti, V, Zr, and their alloys for structural analysis on the optical microscope. The base electrolyte contains 5g ZnCl 2 and 15g AlCl 3 . 6H 2 O in 200 ml methyl alcohol, plus an amount of H 2 SO 4 depending on the metal being polished. Five etchants are listed

Effects of different polishing techniques on the surface roughness of dental porcelains

Directory of Open Access Journals (Sweden)

Işil Sarikaya

2010-02-01

Full Text Available OBJECTIVE: The purpose of this study was to evaluate the effects of different polishing techniques on the surface roughness of dental porcelains. MATERIAL AND METHODS: Fifty-five cylindirical specimens (15x2 mm were prepared for each feldspathic (Vita VMK 95, Ceramco III and low-fusing dental porcelain (Matchmaker. Fifty-five specimens of machinable feldspathic porcelain blocks (Vitablocs Mark II, (12x14x18 mm were cut into 2-mm-thick slices (12x14 mm with low speed saw. The prepared specimens were divided into 11 groups (n=5 representing different polishing techniques including control ((C no surface treatment, glaze (G and other 9 groups that were finished and polished with polishing discs (Sof-Lex (Sl, two porcelain polishing kits (NTI (Pk, Dialite II (Di, a diamond polishing paste (Sparkle (Sp, a zirconium silicate based cleaning and polishing prophy paste (Zircate (Zr, an aluminum oxide polishing paste (Prisma Gloss (Pg, and combinations of them. The surface roughness of all groups was measured with a profilometer. The data were analyzed with a 2-way analysis of variance, and the mean values were compared by the Tukey Honestly Significant Difference test (a=0.05. RESULTS: For all porcelain material groups, the lowest Ra values were observed in Group Gl, Group Sl, Group Pk, and Group Di, which were not significantly different from each other (p>0.05.When comparing the 4 different porcelain materials, the machinable feldspathic porcelain block group (Mark II demonstrated statistically significantly less Ra values than the other porcelain materials tested (p<0.05. No significant difference was observed between the VMK 95 and Ceramco III porcelain groups (p=0.919, also these groups demonstrated the highest Ra values. CONCLUSION: Subjected to surface roughness, the surfaces obtained with polishing and/or cleaning-prophy paste materials used alone were rougher compared to the surfaces finished using Sof-lex, Dialite, and NTI polishing kit

The Levels of German Teacher Trainers Working in Turkey Regarding Reigeluth's Organizational Strategies

Science.gov (United States)

Batdi, Veli; Elaldi, Senel

2016-01-01

The purpose of this study is to evaluate the views of German teacher trainers working in Turkey about their level regarding Reigeluth's organizational strategies and to analyze their views in terms of gender, geographic region, seniority, and graduated high school variables. While the population of the study consisted of German teacher trainers…

Teaching German-Americana

Science.gov (United States)

Tolzmann, Don Heinrich

1976-01-01

A university course entitled "The German-Americans" attempted to study and evaluate German culture in the U. S. Lecture topics and term paper theses are listed and a selected annotated bibliography of German-American culture is included. (CHK)

Polish Phoneme Statistics Obtained On Large Set Of Written Texts

Directory of Open Access Journals (Sweden)

Bartosz Ziółko

2009-01-01

Full Text Available The phonetical statistics were collected from several Polish corpora. The paper is a summaryof the data which are phoneme n-grams and some phenomena in the statistics. Triphonestatistics apply context-dependent speech units which have an important role in speech recognitionsystems and were never calculated for a large set of Polish written texts. The standardphonetic alphabet for Polish, SAMPA, and methods of providing phonetic transcriptions are described.

Polishing compound for plastic surfaces

Science.gov (United States)

Stowell, M.S.

1991-01-01

This invention is comprised of a polishing compound for plastic materials. The compound includes approximately by approximately by weight 25 to 80 parts at least one petroleum distillate lubricant, 1 to 12 parts mineral spirits, 50 to 155 parts abrasive paste, and 15 to 60 parts water. Preferably, the compound includes approximately 37 to 42 parts at least one petroleum distillate lubricant, up to 8 parts mineral spirits, 95 to 110 parts abrasive paste, and 50 to 55 parts water. The proportions of the ingredients are varied in accordance with the particular application. The compound is used on PLEXIGLAS{trademark}, LEXAN{trademark}, LUCITE{trademark}, polyvinyl chloride (PVC), and similar plastic materials whenever a smooth, clear polished surface is desired.

Awareness of the German population of common available guidelines of how to cope with lower back pain.

Science.gov (United States)

Werber, Andreas; Zimmermann-Stenzel, Monique; Moradi, Babak; Neubauer, Eva; Schiltenwolf, Marcus

2014-01-01

Several countries developed guidelines in order to provide a systematic approach for treatment of (chronic) lower back pain. The risk of suffering from (chronic) lower back pain differs significantly within the general population. A serious lack of research exists concerning the risk factor "dysfunctional behavior of the subjects in terms of acute lower back pain." The purpose of this study was to assess the knowledge of the German population regarding the availability of guidelines about managing lower back pain. Prospective observational cohort study. We interviewed 983 subjects by phone. The study population included 50 - 70-year-old men and women with German residency and sufficient language ability. Of all the subjects, 70.2% claimed that they suffered at least once in their lifetime with lower back pain. Lower back pain with radiating symptoms occurred in 28.7%. Women were affected significantly more frequently compared to the epidemiological data. Of all the subjects with lower education, 82.9% suffered from lower back pain at least once in their lifetime compared to only 62.4% of people with university degrees. Education was also a protective factor for lower back pain with radiating pain. People who completed secondary modern school were 42% less likely to suffer from lower back pain than those who did not graduate. Knowing active rules of conduct occurred significantly more often at higher educational levels (i.e. all kinds of sports and exercises requiring physical strength, flexibility, power, agility, coordination, grace, balance and control, in particular stretching exercises) odds ratio = 7.78, physical activities odds ratio = 3.92, relaxation exercises odds ratio = 3.51). Data acquisition was performed by an external company and therefore provided only limited options for external validity. Furthermore data acquisition was restricted to 50 - 70-year-old patients, since this age group is at higher risk of suffering from lower back pain. A conclusion

Patterns of Childhood Abuse and Neglect in a Representative German Population Sample.

Directory of Open Access Journals (Sweden)

Christoph Schilling

Full Text Available Different types of childhood maltreatment, like emotional abuse, emotional neglect, physical abuse, physical neglect and sexual abuse are interrelated because of their co-occurrence. Different patterns of childhood abuse and neglect are associated with the degree of severity of mental disorders in adulthood. The purpose of this study was (a to identify different patterns of childhood maltreatment in a representative German community sample, (b to replicate the patterns of childhood neglect and abuse recently found in a clinical German sample, (c to examine whether participants reporting exposure to specific patterns of child maltreatment would report different levels of psychological distress, and (d to compare the results of the typological approach and the results of a cumulative risk model based on our data set.In a cross-sectional survey conducted in 2010, a representative random sample of 2504 German participants aged between 14 and 92 years completed the Childhood Trauma Questionnaire (CTQ. General anxiety and depression were assessed by standardized questionnaires (GAD-2, PHQ-2. Cluster analysis was conducted with the CTQ-subscales to identify different patterns of childhood maltreatment.Three different patterns of childhood abuse and neglect could be identified by cluster analysis. Cluster one showed low values on all CTQ-scales. Cluster two showed high values in emotional and physical neglect. Only cluster three showed high values in physical and sexual abuse. The three patterns of childhood maltreatment showed different degrees of depression (PHQ-2 and anxiety (GAD-2. Cluster one showed lowest levels of psychological distress, cluster three showed highest levels of mental distress.The results show that different types of childhood maltreatment are interrelated and can be grouped into specific patterns of childhood abuse and neglect, which are associated with differing severity of psychological distress in adulthood. The results

Patterns of Childhood Abuse and Neglect in a Representative German Population Sample

Science.gov (United States)

Schilling, Christoph; Weidner, Kerstin; Brähler, Elmar; Glaesmer, Heide; Häuser, Winfried; Pöhlmann, Karin

2016-01-01

Background Different types of childhood maltreatment, like emotional abuse, emotional neglect, physical abuse, physical neglect and sexual abuse are interrelated because of their co-occurrence. Different patterns of childhood abuse and neglect are associated with the degree of severity of mental disorders in adulthood. The purpose of this study was (a) to identify different patterns of childhood maltreatment in a representative German community sample, (b) to replicate the patterns of childhood neglect and abuse recently found in a clinical German sample, (c) to examine whether participants reporting exposure to specific patterns of child maltreatment would report different levels of psychological distress, and (d) to compare the results of the typological approach and the results of a cumulative risk model based on our data set. Methods In a cross-sectional survey conducted in 2010, a representative random sample of 2504 German participants aged between 14 and 92 years completed the Childhood Trauma Questionnaire (CTQ). General anxiety and depression were assessed by standardized questionnaires (GAD-2, PHQ-2). Cluster analysis was conducted with the CTQ-subscales to identify different patterns of childhood maltreatment. Results Three different patterns of childhood abuse and neglect could be identified by cluster analysis. Cluster one showed low values on all CTQ-scales. Cluster two showed high values in emotional and physical neglect. Only cluster three showed high values in physical and sexual abuse. The three patterns of childhood maltreatment showed different degrees of depression (PHQ-2) and anxiety (GAD-2). Cluster one showed lowest levels of psychological distress, cluster three showed highest levels of mental distress. Conclusion The results show that different types of childhood maltreatment are interrelated and can be grouped into specific patterns of childhood abuse and neglect, which are associated with differing severity of psychological distress in

Pseudo-random tool paths for CNC sub-aperture polishing and other applications.

Science.gov (United States)

Dunn, Christina R; Walker, David D

2008-11-10

In this paper we first contrast classical and CNC polishing techniques in regard to the repetitiveness of the machine motions. We then present a pseudo-random tool path for use with CNC sub-aperture polishing techniques and report polishing results from equivalent random and raster tool-paths. The random tool-path used - the unicursal random tool-path - employs a random seed to generate a pattern which never crosses itself. Because of this property, this tool-path is directly compatible with dwell time maps for corrective polishing. The tool-path can be used to polish any continuous area of any boundary shape, including surfaces with interior perforations.

Becoming German: Integration, Citizenship and Territorialization of Germanness

DEFF Research Database (Denmark)

Fogelman, Tatiana

2017-01-01

understandings of integration and Germanness, this paper highlights the neglected aspect of the ascendance of Integrationspolitik since the turn of the century: namely how it superseded previous regime of completely bifurcated migration policy for "foreigners" on the one hand, and so-called "settlers" of German......, seen ever more as residing within its state territory rather than some diffuse cultural-linguistic space. Moving our understanding of Germanness beyond the "ethnic nationhood model" (Faist 2008), I argue thus that, in conjunction with the new citizenship law, the emergence of Integrationspolitik...

[Is health really the most important value? - Results of a representative survey of the German general population concerning the subjective meaning of health].

Science.gov (United States)

Hinz, A; Hübscher, U; Brähler, E; Berth, H

2010-12-01

The aim of this study was to investigate which meaning is attributed to health by the general population. Furthermore, the relationship between health satisfaction and health importance was also analysed. A sample of 4,808 representatively selected subjects from the general German population judged the importance and the satisfaction with several life domains, including health, using the questions on life satisfaction FLZ (M). Moreover, sociodemographic variables (sex, age, socioeconomic status) and psychological variables (self-esteem, resilience, anxiety and depression) were collected. Health is the most important life domain. The importance of health increases with increasing age. However, there are no sex differences and SES (socio-economic status) differences concerning the importance of health. Subjective satisfaction with health and health importance are only marginally correlated (r=0.08). High degrees of self-esteem and resilience are associated with a high importance of health. Anxiety and depression show only weak relationships to the importance of health. In the German general population health has a very high subjective significance. This is not only true for handicapped or ill people, but for all subsamples of the society. Therefore, a general plea for an understanding of the importance of health is not necessary, not even for subgroups. Preventive activity can be based on the general understanding of the meaning of health, but it should pursue specific health- related goals for target groups. © Georg Thieme Verlag KG Stuttgart · New York.

The Germans revisiting Gakovo: Encounters, cooperation and reconciliation of the former and present local populations

Directory of Open Access Journals (Sweden)

Krel Aleksandar

2015-01-01

Full Text Available This paper presents a case study about a reunion of the evicted members of the German national minority in Vojvodina, who after almost five decades came to visit their homeland, and the local population in Gakovo. The case study attests about lengthy and very complicated process in resolving post-conflict situations. The process’ launch is dependent on the willingness of the individuals involved to face not only one’s own pain caused by the enemy, but also on ability to comprehend, during an encounter with “the dark side of one’s past”, sufferings and humiliation experienced by the adversary. Awareness and acceptance of one’s own responsibility in the conflict are a prerequisite for forgiveness and reconciliation of the opposing parties. The outcome of this process is uncertain to the very end and conditioned upon the entire network of interlocking political, economic and cultural factors.

Phonematic translation of Polish texts by the neural network

International Nuclear Information System (INIS)

Bielecki, A.; Podolak, I.T.; Wosiek, J.; Majkut, E.

1996-01-01

Using the back propagation algorithm, we have trained the feed forward neural network to pronounce Polish language, more precisely to translate Polish text into its phonematic counterpart. Depending on the input coding and network architecture, 88%-95% translation efficiency was achieved. (author)

The Relation of Rapid Changes in Obesity Measures to Lipid Profile - Insights from a Nationwide Metabolic Health Survey in 444 Polish Cities

Science.gov (United States)

Kaess, Bernhard M.; Jóźwiak, Jacek; Nelson, Christopher P.; Lukas, Witold; Mastej, Mirosław; Windak, Adam; Tomasik, Tomasz; Grzeszczak, Władysław; Tykarski, Andrzej; Gąsowski, Jerzy; Ślęzak-Prochazka, Izabella; Ślęzak, Andrzej; Charchar, Fadi J.; Sattar, Naveed; Thompson, John R.; Samani, Nilesh J.; Tomaszewski, Maciej

2014-01-01

Objective The impact of fast changes in obesity indices on other measures of metabolic health is poorly defined in the general population. Using the Polish accession to the European Union as a model of political and social transformation we examined how an expected rapid increase in body mass index (BMI) and waist circumference relates to changes in lipid profile, both at the population and personal level. Methods Through primary care centres in 444 Polish cities, two cross-sectional nationwide population-based surveys (LIPIDOGRAM 2004 and LIPIDOGRAM 2006) examined 15,404 and 15,453 adult individuals in 2004 and 2006, respectively. A separate prospective sample of 1,840 individuals recruited in 2004 had a follow-up in 2006 (LIPIDOGRAM PLUS). Results Two years after Polish accession to European Union, mean population BMI and waist circumference increased by 0.6% and 0.9%, respectively. This tracked with a 7.6% drop in HDL-cholesterol and a 2.1% increase in triglycerides (all p<0.001) nationwide. The direction and magnitude of the population changes were replicated at the personal level in LIPIDOGRAM PLUS (0.7%, 0.3%, 8.6% and 1.8%, respectively). However, increases in BMI and waist circumference were both only weakly associated with HDL-cholesterol and triglycerides changes prospectively. The relation of BMI to the magnitude of change in both lipid fractions was comparable to that of waist circumference. Conclusions Moderate changes in obesity measures tracked with a significant deterioration in measures of pro-atherogenic dyslipidaemia at both personal and population level. These associations were predominantly driven by factors not measureable directly through either BMI or waist circumference. PMID:24497983

Tribological approach to study polishing of road surface under traffic

OpenAIRE

KANE, Malal; DO, Minh Tan

2007-01-01

The polishing phenomenon of road pavements under the vehicle traffic constitutes the main mechanism inherent to the loss of skid resistance over time. A better understanding of this phenomenon would allow an improvement of road safety. This study comprises a review of laboratory test and a model simulating the polishing of road surfaces. The laboratory test uses a polishing machine so called 'Wehner-Schulze' which can reproduce the evolution of the road texture from specimens taken directly f...

Celiac disease on YouTube - a study of the Polish content available on the popular video-sharing website.

Science.gov (United States)

Kiedrowski, Mirosław; Mróz, Andrzej; Gajewska, Danuta; Nurzyński, Paweł; Deptała, Andrzej

2017-10-23

Celiac disease affects about 1% of the population. Since most Polish households have a broadband Internet connection, a lot of people use web resources to learn about health and disease. YouTube service (www.youtube.com) offers a lot of videos concerning celiac disease. However, the credibility of the Polish videos available on YouTube and concerning celiac disease has never been analyzed. The aim of the study was to determine whether the YouTube service offers valuable content for Polish people affected by celiac disease. One hundred and fifty-four unique videos devoted to celiac disease and available in the Polish language were identified and critically assessed. Each video was categorized due to its topic(s), and evaluated for its credibility by two independent researchers. In general, 127 (82.5%) videos were found to be credible. The most credible categories of content presented organizations and events related to celiac disease/celiac society, followed by culinary recipes (100.0, 100.0, and 95.6% of credible videos, respectively). The least trustworthy categories were devoted to pathobiology and advertisements (55.6 and 54.3% of credible videos, respectively). YouTube service can serve as a supplementary source of knowledge for people affected by celiac disease, after careful selection of trustworthy content.

Polish universal neonatal hearing screening program-4-year experience (2003-2006).

Science.gov (United States)

Szyfter, Witold; Wróbel, Maciej; Radziszewska-Konopka, Marzanna; Szyfter-Harris, Joanna; Karlik, Michał

2008-12-01

The aim of this paper is to share our experience and observations in running the Universal Neonatal Hearing Screening Program on a national level, present results and indicate some problems that have arisen during these 4 years. Polish Universal Neonatal Hearing Screening Program started back in 2002 in all neonatal units in Poland. Implemented testing methods consisted of test of transient evoked otoacoustic emission (TEOAE) performed in all new born children in their first 2-3 days of life and auditory brainstem response testing (ABR) conducted on children, who did not meet the TEOAE pass criteria. Additional questionnaire registered information on ototoxic drugs and family history of hearing impairment in every newborn. Diagnosed children were further referred for treatment and rehabilitation. After 4 years of running the program (between 2003 and 2006) a total number of 1,392,427 children were screened for hearing impairment, what stands for 96.3% of all delivered babies, registered in Poland. The screening program enabled to identify and refer for further treatment 2485 children with various types of hearing loss, 312 with profound (0.02% of population) and 145 with severe sensorineural hearing loss (0.11% of population). Our results indicate the accuracy of newborn hearing screening which remain an issue. Although improvement is needed in both intervention systems and diagnostic follow-up of hospitals, the Polish Universal Neonatal Hearing Program fully has achieved the main goal, the identification and treatment of hearing impaired children.

Research on high-efficiency polishing technology of photomask substrate

Science.gov (United States)

Zhao, Shijie; Xie, Ruiqing; Zhou, Lian; Liao, Defeng; Chen, Xianhua; Wang, Jian

2018-03-01

A method of photomask substrate fabrication is demonstrated ,that the surface figure and roughness of fused silica will converge to target precision rapidly with the full aperture polishing. Surface figure of optical flats in full aperture polishing processes is primarily dependent on the surface profile of polishing pad, therefor, a improved function of polishing mechanism was put forward based on two axis lapping machine and technology experience, and the pad testing based on displacement sensor and the active conditioning method of the pad is applied in this research. Moreover , the clamping deformation of the thin glass is solved by the new pitch dispensing method. The experimental results show that the surface figure of the 152mm×152mm×6.35mm optical glass is 0.25λ(λ=633nm) and the roughness is 0.32nm ,which has meet the requirements of mask substrate for 90 45nm nodes.

The Relative Age Effect and Physical Fitness Characteristics in German Male Tennis Players

Directory of Open Access Journals (Sweden)

Alexander Ulbricht, Jaime Fernandez-Fernandez, Alberto Mendez-Villanueva, Alexander Ferrauti

2015-09-01

Full Text Available The aims of the study were to test: 1 whether the relative age effect (RAE was prevalent in young (U12-U18 German male tennis players; 2 the potential influence of age and/or skill level on RAE and 3 whether maturity, anthropometric and fitness measures vary according to birth date distribution in elite youth tennis players. For the present study the following male populations were analysed: Overall German population (n = 3.216.811, all players affiliated to the German Tennis Federation (DTB (n = 120.851, players with DTB official ranking (n = 7165, regional (n = 381 and national (n = 57 squads (11-17 years old, as well as the top 50 German senior players were analyzed. RAEs were more prevalent at higher competitive levels with more players born in the first quarter of the year compared with the reference population for ranked (29.6%, regional (38.1% and national (42.1% players. No systematic differences were found in any of the maturity, anthropometric and fitness characteristics of the regional squad players born across different quarters. RAEs are present in the DTB competitive system and it was more pronounced at higher competitive levels. Compared with early born, late born players who were selected into elite squads did not differ in maturation, anthropometric and fitness characteristics.

Forming a health culture of future teachers in Polish educational establishments

Directory of Open Access Journals (Sweden)

T.S. IERMAKOVA

2014-10-01

Full Text Available Aim: to study the experience of the structure and system of training of future teachers in Polish schools. Material: content analysis of domestic and foreign authors. Used data from the survey of students of Polish universities. Also were used survey results through polish service ANKIETKA. For comparison, a questionnaire survey 35 students of the Faculty of Physical Education (future teachers of physical training and 30 students - the future teachers of elementary school of Ukrainian university. Results: the study of Polish teachers consider health culture of a person as the ability to assess individual and community health needs using in everyday life hygiene and health regulations. There have been some differences among Ukrainian and Polish students in their health and health culture. Among the respondents, Polish students - the future teachers of physical culture, is dominated motives such as the improvement of the physical condition, strengthen self-esteem, as well as improved health. Polish students from other disciplines believe that the most important motive for the adoption of physical activity is a concern for the physical well-being and mental health. The majority of Ukrainian students (future teachers of physical culture believe an important part of building health culture of their direct participation in various sports clubs, as well as the ability to organize physical culture, sports and educational work with students outside the classroom. Ukrainian students (other specialty noted the need to improve health, enhance knowledge in specific subjects humanities and promoting healthy lifestyles. Conclusions: It is recommended to use the experience of preparing students of Polish schools in modern Ukrainian higher education.

Confocal Raman spectrocopy for the analysis of nail polish evidence.

Science.gov (United States)

López-López, Maria; Vaz, Joana; García-Ruiz, Carmen

2015-06-01

Nail polishes are cosmetic paints that may be susceptible of forensic analysis offering useful information to assist in a crime reconstruction. Although the nail polish appearance could allow a quick visual identification of the sample, this analysis is subjected to the perception and subjective interpretation of the forensic examiner. The chemical analysis of the nail polishes offers great deal of information not subjected to analyst interpretation. Confocal Raman spectroscopy is a well-suited technique for the analysis of paints due to its non-invasive and non-destructive nature and its ability to supply information about the organic and inorganic components of the sample. In this work, 77 regular and gel nail polishes were analyzed with confocal Raman spectroscopy using two laser wavelengths (532 and 780 nm). The sample behavior under the two laser wavelengths and the differences in the spectra taken at different points of the sample were studied for each nail polish. Additionally, the spectra obtained for all the nail polishes were visually compared. The results concluded that the longer laser wavelength prevents sample burning and fluorescence effects; the similarity among the spectra collected within the sample is not directly related with the presence of glitter particles; and 64% of the samples analyzed showed a characteristic spectrum. Additionally, the use of confocal Raman spectroscopy for the forensic analysis of nail polishes evidence in the form of flakes or smudges on different surfaces were studied. The results showed that both types of evidence can be analyzed by the technique. Also, two non-invasive sampling methods for the collection of the evidence from the nails of the suspect or the victim were proposed: (i) to use acetone-soaked cotton swabs to remove the nail varnishes and (ii) to scrape the nail polish from the nail with a blade. Both approaches, each exhibiting advantages and drawbacks in terms of transport and handling were appropriate

Novel ceria-polymer microcomposites for chemical mechanical polishing

International Nuclear Information System (INIS)

Coutinho, Cecil A.; Mudhivarthi, Subrahmanya R.; Kumar, Ashok; Gupta, Vinay K.

2008-01-01

Abrasive particles are key components in slurries for chemical mechanical polishing (CMP). Since the particle characteristics determine surface quality of wafers during polishing, in this research, novel abrasive composite particles have been developed. These composite particles contain nanoparticles of ceria dispersed within cross-linked, polymeric microspheres such that the average mass fraction of ceria is approximately 50% in the particles. The microspheres are formed by co-polymerization of N-isopropylacrylamide (NIPAM) with 3-(trimethoxysilyl)propyl methacrylate (MPS) and contain interpenetrating (IP) chains of poly(acrylic acid) (PAAc). Infrared spectroscopy, dynamic light scattering, and transmission electron microscopy are employed to characterize the composite particles. Planarization of silicon dioxide wafers is studied on a bench-top CMP tester and the polished surfaces are characterized by ellipsometry, atomic force and optical microscopy. Slurries formed from the composite ceria-polymer particles lead to lower topographical variations and surface roughness than slurries of only ceria nanoparticles even though both slurries achieve similar removal rates of ∼100 nm/min for similar ceria content. Polishing with the novel composite particles gives surfaces devoid of scratches and particle deposition, which makes these particles suitable for the next generation slurries in CMP

Novel ceria-polymer microcomposites for chemical mechanical polishing

Energy Technology Data Exchange (ETDEWEB)

Coutinho, Cecil A. [Department of Chemical and Biomedical Engineering, University of South Florida (United States); Mudhivarthi, Subrahmanya R.; Kumar, Ashok [Nanomaterials and Nanomanufacturing Research Center, University of South Florida (United States); Department of Mechanical Engineering, University of South Florida (United States); Gupta, Vinay K. [Department of Chemical and Biomedical Engineering, University of South Florida (United States)], E-mail: vkgupta@eng.usf.edu

2008-12-30

Abrasive particles are key components in slurries for chemical mechanical polishing (CMP). Since the particle characteristics determine surface quality of wafers during polishing, in this research, novel abrasive composite particles have been developed. These composite particles contain nanoparticles of ceria dispersed within cross-linked, polymeric microspheres such that the average mass fraction of ceria is approximately 50% in the particles. The microspheres are formed by co-polymerization of N-isopropylacrylamide (NIPAM) with 3-(trimethoxysilyl)propyl methacrylate (MPS) and contain interpenetrating (IP) chains of poly(acrylic acid) (PAAc). Infrared spectroscopy, dynamic light scattering, and transmission electron microscopy are employed to characterize the composite particles. Planarization of silicon dioxide wafers is studied on a bench-top CMP tester and the polished surfaces are characterized by ellipsometry, atomic force and optical microscopy. Slurries formed from the composite ceria-polymer particles lead to lower topographical variations and surface roughness than slurries of only ceria nanoparticles even though both slurries achieve similar removal rates of {approx}100 nm/min for similar ceria content. Polishing with the novel composite particles gives surfaces devoid of scratches and particle deposition, which makes these particles suitable for the next generation slurries in CMP.

Math Anxiety Questionnaire: Similar Latent Structure in Brazilian and German School Children

Directory of Open Access Journals (Sweden)

Guilherme Wood

2012-01-01

Full Text Available Math anxiety is a relatively frequent phenomenon often related to low mathematics achievement and dyscalculia. In the present study, the German and the Brazilian versions of the Mathematics Anxiety Questionnaire (MAQ were examined. The two-dimensional structure originally reported for the German MAQ, that includes both affective and cognitive components of math anxiety was reproduced in the Brazilian version. Moreover, mathematics anxiety also was found to increase with age in both populations and was particularly associated with basic numeric competencies and more complex arithmetics. The present results suggest that mathematics anxiety as measured by the MAQ presents the same internal structure in culturally very different populations.

Borel hierarchies in infinite products of Polish spaces

Indian Academy of Sciences (India)

with two product topologies: (i) the product of copies of the Polish topology on X, so that H is again a Polish space and (ii) the product of copies of the discrete topology on X. Define now the Borel hierarchy in the larger topology on H. To do so, we need some notation. An element of H will be denoted by h = (x1,x2,...,xn,.

Working conditions and Work-Family Conflict in German hospital physicians: psychosocial and organisational predictors and consequences.

Science.gov (United States)

Fuss, Isabelle; Nübling, Matthias; Hasselhorn, Hans-Martin; Schwappach, David; Rieger, Monika A

2008-10-07

Germany currently experiences a situation of major physician attrition. The incompatibility between work and family has been discussed as one of the major reasons for the increasing departure of German physicians for non-clinical occupations or abroad. This study investigates predictors for one particular direction of Work-Family Conflict--namely work interfering with family conflict (WIF)--which are located within the psychosocial work environment or work organisation of hospital physicians. Furthermore, effects of WIF on the individual physicians' physical and mental health were examined. Analyses were performed with an emphasis on gender differences. Comparisons with the general German population were made. Data were collected by questionnaires as part of a study on Psychosocial work hazards and strains of German hospital physicians during April-July 2005. Two hundred and ninety-six hospital physicians (response rate 38.9%) participated in the survey. The Copenhagen Psychosocial Questionnaire (COPSOQ), work interfering with family conflict scale (WIF), and hospital-specific single items on work organisation were used to assess WIF, its predictors, and consequences. German hospital physicians reported elevated levels of WIF (mean = 74) compared to the general German population (mean = 45, p work, elevated number of days at work despite own illness, and consequences of short-notice changes in the duty roster. Good sense of community at work was a protective factor. Compared to the general German population, we observed a significant higher level of quantitative work demands among hospital physicians (mean = 73 vs. mean = 57, p work ability, and higher satisfaction with life in general. Compared to the German general population, physicians showed significantly higher levels of individual stress and quality of life as well as lower levels for well-being. This has to be judged as an alerting finding regarding the state of physicians' health. In our study, work

Polishing Sapphire Substrates by 355 nm Ultraviolet Laser

Directory of Open Access Journals (Sweden)

X. Wei

2012-01-01

Full Text Available This paper tries to investigate a novel polishing technology with high efficiency and nice surface quality for sapphire crystal that has high hardness, wear resistance, and chemical stability. A Q-switched 355 nm ultraviolet laser with nanosecond pulses was set up and used to polish sapphire substrate in different conditions in this paper. Surface roughness Ra of polished sapphire was measured with surface profiler, and the surface topography was observed with scanning electronic microscope. The effects of processing parameters as laser energy, pulse repetition rate, scanning speed, incident angle, scanning patterns, and initial surface conditions on surface roughness were analyzed.

Self-reported asthma and allergies in top athletes compared to the general population - results of the German part of the GA2LEN-Olympic study 2008

Science.gov (United States)

2010-01-01

Background Prevalence of asthma and allergies in top athletes is high. However, most previous studies did not include a general population comparison group. We aimed to compare the prevalence of asthma, allergies and medical treatment in different groups of German top athletes to the general population. Methods Prior to the 2008 Summer Olympic Games, 291 German candidates for participation (65%) completed a questionnaire on respiratory and allergic symptoms. Results were compared to those of a general population study in Germany (n = 2425, response 68%). Furthermore, associations between types of sports and the self-reported outcomes were calculated. All models were adjusted for age, sex, level of education and smoking. Results Athletes reported significantly more doctors' diagnosed asthma (17% vs. 7%), more current use of asthma medication (10% vs. 4%) and allergic rhinitis (25% vs. 17%) compared to the general population. After adjustment, top athletes only had an increased Odds Ratio for doctor's diagnosed asthma (OR: 1.6; 95% CI 1.1-2.5). Compared to the general population, athletes in endurance sports had an increased OR for doctor's diagnosed asthma (2.4; 1.5-3.8) and current use of asthma medication (1.8; 1.0-3.4). In this group, current wheeze was increased when use of asthma medication was taken into account (1.8; 1.1-2.8). For other groups of athletes, no significantly increased ORs were observed. Conclusions Compared to the general population, an increased risk of asthma diagnosis and treatment was shown for athletes involved in endurance sports. This might be due to a better medical surveillance and treatment of these athletes. PMID:21118543

Effect of One-Step and Multi-Steps Polishing System on Enamel Roughness

Directory of Open Access Journals (Sweden)

Cynthia Sumali

2013-07-01

Full Text Available Normal 0 false false false MicrosoftInternetExplorer4 The final procedures of orthodontic treatment are bracket debonding and cleaning the remaining adhesive. Multi-step polishing system is the most common method used. The disadvantage of that system is long working time, because of the stages that should be done. Therefore, dental material manufacturer make an improvement to the system, to reduce several stages into one stage only. This new system is known as one-step polishing system. Objective: To compare the effect of one-step and multi-step polishing system on enamel roughness after orthodontic bracket debonding. Methods: Randomized control trial was conducted included twenty-eight maxillary premolar randomized into two polishing system; one-step OptraPol (Ivoclar, Vivadent and multi-step AstroPol (Ivoclar, Vivadent. After bracket debonding, the remaining adhesive on each group was cleaned by subjective polishing system for ninety seconds using low speed handpiece. The enamel roughness was subjected to profilometer, registering two roughness parameters (Ra, Rz. Independent t-test was used to analyze the mean score of enamel roughness in each group. Results: There was no significant difference of enamel roughness between one-step and multi-step polishing system (p>0.005. Conclusion: One-step polishing system can produce a similar enamel roughness to multi-step polishing system after bracket debonding and adhesive cleaning.DOI: 10.14693/jdi.v19i3.136

The View of Lithuanian Statehood Held by the Polish Underground during 1939-1944

OpenAIRE

Bubnys, Arūnas

2006-01-01

The article investigates the attitudes of Polish underground actors towards the statehood of Lithuania, its territorial integrity, and Lithuanian-Polish relations during the World War II. The author draws the conclusion that Polish underground political structures expressed a hostile and prejudiced attitude towards Lithuania. All the blame and responsibility for bad mutual relations is put on Lithuania and Lithuanians. Polish underground actors living in Vilnija were extremely hostile towards...

Prevalence of Chronic Disabling Noncancer Pain and Associated Demographic and Medical Variables: A Cross-Sectional Survey in the General German Population.

Science.gov (United States)

Häuser, Winfried; Schmutzer, Gabriele; Hilbert, Anja; Brähler, Elmar; Henningsen, Peter

2015-10-01

In population surveys, up to 30% of participants reported chronic pain. Reports of chronic pain do not necessarily imply disability associated with pain. We assessed the prevalence of chronic disabling noncancer pain and associated demographic and medical variables in a sample of the general German population. A cross-sectional survey was conducted with 4360 people aged 14 years and above, who were representative of the German population. Measures were obtained for demographic variables, presence of chronic pain (based on the definition of the International Association for the Study of Pain), chronic pain stages (based on a chronic pain grade questionnaire), and disease load (based on the self-reported comorbidity questionnaire). Responses were received from 2508 people. The prevalence of chronic pain was 28.3% (95% [confidence interval] CI, 26.5%-30.1%). In all, 7.3% (95% CI, 5.9%-8.7%) of participants met the criteria of chronic disabling noncancer pain. Chronic disabling noncancer pain was associated with age above 65 years (odds ratios [OR]=4.81 [95% CI, 1.57-14.79]), low family income (OR=2.54 [95% CI, 1.36-4.74]), obesity (OR=3.58 [95% CI, 2.21-5.79]), heart disease (OR=2.23 [95% CI, 3.69-11.40]), stomach disease (OR=4.24 [95% CI, 2.12-8.49]), and rheumatic disease (OR=3.67 [95% CI, 2.16-6.23]) when compared with no chronic pain. Chronic disabling noncancer pain was associated with low family income (OR=2.29 [95% CI, 1.23-4.27]), obesity (OR=2.14 [95% CI, 1.30-3.52]), and depression (OR=3.26 [95% CI, 1.90-5.66]) when compared with chronic nondisabling noncancer pain. Prevalence rates of chronic disabling pain in the general population rather than prevalence rates of chronic pain might provide evidence in support of pain specialist care. The association of chronic disabling noncancer pain with mental disorders highlights the need for psychosocial services in chronic pain management.

Experimental Study on Layered Ice Bonded Abrasive Polishing of Glass-ceramics

Directory of Open Access Journals (Sweden)

Yuli SUN

2014-12-01

Full Text Available Layered ice bonded abrasive tools (LIBAT is a new kind of one which not only has the ability of lapping and polishing but also has the effect of self-dressing. In this paper, two kinds of layered ice bonded abrasive tools were designed and manufactured. Experimental studies on layered ice bonded abrasive (LIBA polishing of glass-ceramics were conducted. The results show that the surface topography of glass-ceramics polished by micro α-Al2O3-nano α-Al2O3 LIBAT is better than that of polished by micro α-Al2O3-nano SiO2 LIBAT. The surface roughness Sa of glass-ceramics polished by the two kinds of LIBAT is at the nanometer scale. The reasons of this phenomenon were analyzed. The experimental results illustrate that the LIBAT shows good effect and can be used in production practice. DOI: http://dx.doi.org/10.5755/j01.ms.20.4.6149

Energy savings in Polish buildings

Energy Technology Data Exchange (ETDEWEB)

Markel, L.C.; Gula, A.; Reeves, G.

1995-12-31

A demonstration of low-cost insulation and weatherization techniques was a part of phase 1 of the Krakow Clean Fossil Fuels and Energy Efficient Project. The objectives were to identify a cost-effective set of measures to reduce energy used for space heating, determine how much energy could be saved, and foster widespread implementation of those measures. The demonstration project focused on 4 11-story buildings in a Krakow housing cooperative. Energy savings of over 20% were obtained. Most important, the procedures and materials implemented in the demonstration project have been adapted to Polish conditions and applied to other housing cooperatives, schools, and hospitals. Additional projects are being planned, in Krakow and other cities, under the direction of FEWE-Krakow, the Polish Energie Cities Network, and Biuro Rozwoju Krakowa.

Nd:YOV4 laser polishing on WC-Co HVOF coating

Science.gov (United States)

Giorleo, L.; Ceretti, E.; Montesano, L.; La Vecchia, G. M.

2017-10-01

WC/Co coatings are widely applied to different types of components due to their extraordinary performance properties including high hardness and wear properties. In industrial applications High Velocity Oxy-Fuel (HVOF) technique is extensively used to deposit hard metal coatings. The main advantage of HVOF compared to other thermal spray techniques is the ability to accelerate the melted powder particles of the feedstock material at a relatively high velocity, leading to obtain good adhesion and low porosity level. However, despite the mentioned benefits, the surface finish quality of WC-Co HVOF coatings results to be poor (Ra higher than 5 µm) thus a mechanical polishing process is often needed. The main problem is that the high hardness of coating leads the polishing process expensive in terms of time and tool wear; moreover polishing becomes difficult and not always possible in case of limited accessibility of a part, micro dimensions or undercuts. Nowadays a different technique available to improve surface roughness is the laser polishing process. The polishing principle is based on focused radiation of a laser beam that melts a microscopic layer of surface material. Compared to conventional polishing process (as grinding) it ensures the possibility of avoiding tool wear, less pollution (no abrasive or liquids), no debris, less machining time and coupled with a galvo system it results to be more suitable in case of 3D complex workpieces. In this paper laser polishing process executed with a Nd:YOV4 Laser was investigated: the effect of different process parameters as initial coating morphology, laser scan speed and loop cycles were tested. Results were compared by a statistical approach in terms of average roughness along with a morphological analysis carried out by Scanning Electron Microscope (SEM) investigation coupled with EDS spectra.

A German catastrophe? German historians and the Allied bombings, 1945-2010

NARCIS (Netherlands)

von Benda-Beckmann, B.R.

2010-01-01

As one of the major symbols of German suffering, the Allied bombing war left a strong imprint on German society. To a much wider extent than is often claimed, the Allied bombings became part of German debates on the Second World War. In both the GDR as well as the Federal Republic before and after

[The boycott against German scientists and the German language after World War I].

Science.gov (United States)

Reinbothe, R

2013-12-01

After the First World War, the Allied academies of sciences staged a boycott against German scientists and the German language. The objective of the boycott was to prevent the re-establishment of the prewar dominance of German scientists, the German language and German publications in the area of international scientific cooperation. Therefore the Allies excluded German scientists and the German language from international associations, congresses and publications, while they created new international scientific organizations under their leadership. Medical associations and congresses were also affected, e. g. congresses on surgery, ophthalmology and tuberculosis. Allied physicians replaced the "International Anti-Tuberculosis Association" founded in Berlin in 1902 with the "Union Internationale contre la Tuberculose"/"International Union against Tuberculosis", founded in Paris in 1920. Only French and English were used as the official languages of the new scientific organizations, just as in the League of Nations. The boycott was based on the fact that the German scientists had denied German war guilt and war crimes and glorified German militarism in a manifesto "To The Civilized World!" in 1914. The boycott first started in 1919 and had to be abolished in 1926, when Germany became a member of the League of Nations. Many German and foreign physicians as well as other scientists protested against the boycott. Some German scientists and institutions even staged a counter-boycott impeding the resumption of international collaboration. The boycott entailed an enduring decline of German as an international scientific language. After the Second World War scientists of the victorious Western Powers implemented a complete reorganization of the international scientific arena, based on the same organizational structures and language restrictions they had built up in 1919/1920. At the same time scientists from the U.S.A. staged an active language and publication policy, in

Experimental Study on Abrasive Waterjet Polishing of Hydraulic Turbine Blades

International Nuclear Information System (INIS)

Khakpour, H; Birglenl, L; Tahan, A; Paquet, F

2014-01-01

In this paper, an experimental investigation is implemented on the abrasive waterjet polishing technique to evaluate its capability in polishing of surfaces and edges of hydraulic turbine blades. For this, the properties of this method are studied and the main parameters affecting its performance are determined. Then, an experimental test-rig is designed, manufactured and tested to be used in this study. This test-rig can be used to polish linear and planar areas on the surface of the desired workpieces. Considering the number of parameters and their levels, the Taguchi method is used to design the preliminary experiments. All experiments are then implemented according to the Taguchi L 18 orthogonal array. The signal-to-noise ratios obtained from the results of these experiments are used to determine the importance of the controlled polishing parameters on the final quality of the polished surface. The evaluations on these ratios reveal that the nozzle angle and the nozzle diameter have the most important impact on the results. The outcomes of these experiments can be used as a basis to design a more precise set of experiments in which the optimal values of each parameter can be estimated

Calculation and simulation on mid-spatial frequency error in continuous polishing

International Nuclear Information System (INIS)

Xie Lei; Zhang Yunfan; You Yunfeng; Ma Ping; Liu Yibin; Yan Dingyao

2013-01-01

Based on theoretical model of continuous polishing, the influence of processing parameters on the polishing result was discussed. Possible causes of mid-spatial frequency error in the process were analyzed. The simulation results demonstrated that the low spatial frequency error was mainly caused by large rotating ratio. The mid-spatial frequency error would decrease as the low spatial frequency error became lower. The regular groove shape was the primary reason of the mid-spatial frequency error. When irregular and fitful grooves were adopted, the mid-spatial frequency error could be lessened. Moreover, the workpiece swing could make the polishing process more uniform and reduce the mid-spatial frequency error caused by the fix-eccentric plane polishing. (authors)

Original article Validation of the Polish version of the Collective Self-Esteem Scale

OpenAIRE

Róża Bazińska

2015-01-01

Background The aim of this article is to present research on the validity and reliability of the Collective Self-Esteem Scale (CSES) for the Polish population. The CSES is a measure of individual differences in collective self-esteem, understood as the global evaluation of one’s own social (collective) identity. Participants and procedure Participants from two samples (n = 466 and n = 1,009) completed a paper-pencil set of questionnaires which contained the CSES and the Ro...

Surface morphology changes of acrylic resins during finishing and polishing phases

Directory of Open Access Journals (Sweden)

Glaucio Serra

2013-12-01

Full Text Available INTRODUCTION: The finishing and polishing phases are essential to improve smoothness and shining on the surface of acrylic resins used to make removable orthodontic appliances. A good surface finishing reduces roughness, which facilitates hygiene, prevents staining and provides greater comfort to the patients. OBJECTIVE: The aim of this paper was to analyze the changes on surface morphology of acrylic resins during finishing and polishing phases. METHODS: Thirty discs (10 mm in diameter and 5 mm in length were made with acrylic resin and randomly divided into ten groups. The control group did not receive any treatment while the other groups received gradual finishing and polishing. The last group received the entire finishing and polishing procedures. Surface morphology was qualitatively analyzed through scanning electron microscopy and quantitatively analyzed through a laser profilometer test. RESULTS: The acrylic resin surfaces without treatment showed bubbles which were not observed in the subsequent phases. Wearing out with multilaminated burs, finishing with wood sandpaper and finishing with water sandpaper resulted in surfaces with decreasing irregularities. The surfaces that were polished with pumice and with low abrasive liquids showed high superficial smoothness. CONCLUSION: Highly smooth acrylic resin surfaces can be obtained after mechanical finishing and polishing performed with multilaminated burs, wood sandpaper, water sandpaper, pumice and low abrasive liquids.

The assessment of orthorexia nervosa among 1899 Polish adolescents using the ORTO-15 questionnaire.

Science.gov (United States)

Hyrnik, Joanna; Janas-Kozik, Małgorzata; Stochel, Martyna; Jelonek, Ireneusz; Siwiec, Andrzej; Rybakowski, Janusz K

2016-09-01

Orthorexia nervosa (ON) is considered an eating disorder (ED), with an excessive fixation on the consumption of healthy food and an obsession with its biological purity. Since the adolescent period poses a risk for EDs, the aim of this study was to assess the prevalence of ON in a population of Polish urban adolescents and some possible contributory factors. 1899 high school students, 992 girls and 907 boys aged 15-21 years were studied. Demographic and clinical data were collected using a validated questionnaire including information on preferred living choices, in the context of pro- and antihealth activities. The Polish version of the ORTO-15 questionnaire was used. The mean value of the ORTO-15 was 39.2 ± 3.6 points, with no sex difference. The main factors connected with orthorexia, according to the 'Orthorexia 33.35 and 40' definitions were excess weight, sporting activities, out-of-school activities, smoking status, working parents and a high family income. This study, of a large number of adolescents, showed a prevalence of ON similar to that recorded in adult populations. Since factors predisposing to ON in adolescence differ from those for other eating disorders, it is not clear whether ON should be treated as a new form of ED.

Popularity of marijuana among Polish students

Directory of Open Access Journals (Sweden)

Michał Pająk

2017-09-01

Full Text Available Introduction and the aim: Marijuana is the most commonly used drug in the world (excluding alcohol and tobacco. According to the literature about 16% of Poles at the age of 16 to 64 years old, at least once have used cannabis. The aim of study was to estimate the popularity of marijuana among students of Polish universities. We also asked questions about respondents’ attitude towards marijuana and opinions about its validation. Material and methods: The study was conducted in 2017 on 132 individuals – 60 men and 72 women. The results were analyzed in STATISTICA 10 at p<0.05. Results:Out of interviewees, 63.6% of them, at least once in their lives, have used marijuana. This is a percentage of up to four times greater than that one given in the literature for the general population. Even 80% of men and 50% of women have tried marijuana at least once in their lives. Students of Catholic University of Lublin reach for marijuana significantly more often than students of Medical University of Lublin. The majority of respondents (53% treats marijuana as a "soft" drug, though up 67.4% believe that it has the addictive potential. More than a half of respondents (56.8% stands for liberalization of rules relevant to marijuana in Poland. Vast majority (70% of respondents believes that marijuana is easily available in Poland. Conclusions: Marijuana is a drug popular among students. The criminalization of drug use in Poland is not effective for the prevention of its use, the majority of respondents believes that marijuana is easily available in Poland. Considering the negative health and social consequences of the current state, it is worth wondering about making changes in the education system and Polish drug law.

Implementation of the Bulgarian-Polish online dictionary

Directory of Open Access Journals (Sweden)

Ludmila Dimitrova

2015-11-01

Full Text Available Implementation of the Bulgarian-Polish online dictionary The paper describes the implementation of an online Bulgarian-Polish dictionary as a technological tool for applications in digital humanities. This bilingual digital dictionary is developed in the frame of the joint research project “Semantics and Contrastive Linguistics with a focus on a bilingual electronic dictionary” between IMI-BAS and ISS-PAS, supervised by L. Dimitrova (IMI-BAS and V. Koseska-Toszewa (ISS-PAS. In addition, the main software tools for web-presentation of the dictionary are described briefly.

Lay beliefs on Polish oncology in the evaluation of healthy individuals.

Science.gov (United States)

Synowiec-Piłat, Małgorzata

2017-12-23

Poland is among the countries which reported the highest rates of mortality from cancer. The health behaviours of people are influenced, among other things, by their beliefs about cancer, but their evaluation of oncological institutions and specialists seems also to be of great importance. Objectives. 1. How the respondents evaluate Polish oncology: a) the conditions of treatment in oncology hospitals, b) access to oncological medical services, c) the competence of oncologists. 2. What are the socio-cultural factors of the assessment of Polish oncology? 3. What is the influence of the grade level of the assessment of Polish oncology on the degree of fear and the knowledge about cancer? The study was carried out with a sample of 910 adult residents of Wroclaw in south-west Poland. Quota sampling was used. An interview questionnaire was used as the method. Analysis of the data showed a negative image of Polish oncology, according to the study participants: dissatisfaction with both treatment conditions and with access to medical services. Assessment of Polish oncology depends primarily on education, age and economic situation, as well as 'family history of cancer', and attitude towards doctors. The lower the rating of Polish oncology, the lower the medical knowledge, and the higher the level of fear of cancer. Negative assessment of Polish oncology perpetuates the fear of cancer in society. There is a need for constant improvement of the quality of medical oncology services, for building public trust in physicians, to fight inequalities in health, and to take into account the lay perspectives in developing strategies to combat cancer.

BDNF val66met polymorphism is associated with age at onset and intensity of symptoms of paranoid schizophrenia in a Polish population.

Science.gov (United States)

Suchanek, Renata; Owczarek, Aleksander; Paul-Samojedny, Monika; Kowalczyk, Małgorzata; Kucia, Krzysztof; Kowalski, Jan

2013-01-01

The brain-derived neurotrophic factor (BDNF) is one of the candidate genes for schizophrenia. There is evidence that val66met polymorphism may be involved in the pathophysiology of schizophrenia. The authors genotyped val66met (rs6265) polymorphism of the BDNF gene in 208 inpatients with paranoid schizophrenia and 254 control subjects in a Polish population. There was no association between val66met polymorphism and development of paranoid schizophrenia in either men or women. However, an association was found between this polymorphism and age at onset and psychopathology of paranoid schizophrenia. Men with the val/met genotype had an earlier age at onset, and the val/val genotype predisposed to more severe symptoms, particularly on the General Psychopathology Scale of the Positive and Negative Symptoms Scale (PANSS-G). The analysis of PANSS single items has shown that patients with the val/met genotype had higher scores on a hallucinatory behavior item than those with other genotypes.

[Lysenkoism in Polish botany].

Science.gov (United States)

Köhler, Piotr

2008-01-01

Lysenkoism in Poland was never an autonomous phenomenon. The whole array of reasons for which it appeared in Polish science would require a separate study--here it only needs to be pointed out that the major reasons included terror on the part of the security service, lawlessness, the ubiquitous atmosphere of intimidation and terror, censorship, the diminishing sphere of civil liberties, political show trials, propaganda and denunciations. An important role in facilitating the introduction of Lysenkoism was played also by the reorganization of science after World War Two, the isolation of Polish science from science in the West, as well as the damage it had suffered during the war. At first, Lysenkoism was promoted in Poland by a small group of enthusiastic and uncritical proponents. A overview of the events connected with the ten years of Lysenkoism in Poland (end of 1948--beginning of 1958) shows a two-tier picture of how the 'idea' was propagated. The first tier consisted in the activities of the Association of Marxist Naturalists [Koło Przyrodników-Marksistów], which it engaged in since the end of 1948. The Association was later transformed into a Union of Marxist Naturalists, and this in turn merged, in 1952, with the Copernican Society of Polish Naturalists [Polskie Towarzystwo Przyrodników im. Kopernika]. It was that society which promoted Lysenkoism longest, until the end of 1956. The propaganda and training activities of the circle and the society prepared ground for analogous activities of the newly formed Polish Academy of Science (PAN), which--since its very establishment in 1952--engaged in promoting Lysenkoism through its Second Division. These activities were aimed at naturalists, initially at those who were prominent scientists (eg. the conference at Kuźnice, 1950/1951), and then at those who were only starting their academic career (including national courses in new biology at Dziwnów, 1952, or Kortowo, 1953 and 1955). The end to promoting

Condensate polishing guidelines for PWR and BWR plants

International Nuclear Information System (INIS)

Robbins, P.; Crinigan, P.; Graham, B.; Kohlmann, R.; Crosby, C.; Seager, J.; Bosold, R.; Gillen, J.; Kristensen, J.; McKeen, A.; Jones, V.; Sawochka, S.; Siegwarth, D.; Keeling, D.; Polidoroff, T.; Morgan, D.; Rickertsen, D.; Dyson, A.; Mills, W.; Coleman, L.

1993-03-01

Under EPRI sponsorship, an industry committee, similar in form and operation to other guideline committees, was created to develop Condensate Polishing Guidelines for both PWR and BWR systems. The committee reviewed the available utility and water treatment industry experience on system design and performance and incorporated operational and state-of-the-art information into document. These guidelines help utilities to optimize present condensate polisher designs as well as be a resource for retrofits or new construction. These guidelines present information that has not previously been presented in any consensus industry document. The committee generated guidelines that cover both deep bed and powdered resin systems as an integral part of the chemistry of PWR and BWR plants. The guidelines are separated into sections that deal with the basis for condensate polishing, system design, resin design and application, data management and performance and management responsibilities

Mechanistic, kinetic, and processing aspects of tungsten chemical mechanical polishing

Science.gov (United States)

Stein, David

This dissertation presents an investigation into tungsten chemical mechanical polishing (CMP). CMP is the industrially predominant unit operation that removes excess tungsten after non-selective chemical vapor deposition (CVD) during sub-micron integrated circuit (IC) manufacture. This work explores the CMP process from process engineering and fundamental mechanistic perspectives. The process engineering study optimized an existing CMP process to address issues of polish pad and wafer carrier life. Polish rates, post-CMP metrology of patterned wafers, electrical test data, and synergy with a thermal endpoint technique were used to determine the optimal process. The oxidation rate of tungsten during CMP is significantly lower than the removal rate under identical conditions. Tungsten polished without inhibition during cathodic potentiostatic control. Hertzian indenter model calculations preclude colloids of the size used in tungsten CMP slurries from indenting the tungsten surface. AFM surface topography maps and TEM images of post-CMP tungsten do not show evidence of plow marks or intergranular fracture. Polish rate is dependent on potassium iodate concentration; process temperature is not. The colloid species significantly affects the polish rate and process temperature. Process temperature is not a predictor of polish rate. A process energy balance indicates that the process temperature is predominantly due to shaft work, and that any heat of reaction evolved during the CMP process is negligible. Friction and adhesion between alumina and tungsten were studied using modified AFM techniques. Friction was constant with potassium iodate concentration, but varied with applied pressure. This corroborates the results from the energy balance. Adhesion between the alumina and the tungsten was proportional to the potassium iodate concentration. A heuristic mechanism, which captures the relationship between polish rate, pressure, velocity, and slurry chemistry, is presented

Chemical Mechanical Polishing of Ruthenium, Cobalt, and Black Diamond Films

Science.gov (United States)

Peethala, Brown Cornelius

Ta/TaN bilayer serves as the diffusion barrier as well as the adhesion promoter between Cu and the dielectric in 32 nm technology devices. A key concern of future technology devices (layer (vs. a bilayer of Ta/TaN) to act as a barrier. During patterning, they need to be planarized using conventional chemical mechanical polishing (CMP) to achieve a planar surface. However, CMP of these new barrier materials requires novel slurry compositions that provide adequate selectivity towards Cu and dielectric films, and minimize galvanic corrosion. Apart from the application as a barrier, Ru also has been proposed as a lower electrode material in metal-insulator-metal capacitors where high (> 50 nm/min) Ru removal rates (RRs) are required and as a stop layer in magnetic recording head fabrication where low (hydroxide (KOH). It was also determined that increased the ionic strength is not responsible for the observed increase in Ru removal rate. Benzotirazole (BTA) and ascorbic acid were added to the slurry to reduce the open circuit potential (Eoc) difference between Cu and Ru to ˜20 mV from about 550 mV in the absence of additives. A removal mechanism with KIO4 as the oxidizing agent is proposed based on the formation of several ruthenium oxides, some of which formed residues on the polishing pad below a pH of ˜7. Next, a colloidal silica-based slurry with hydrogen peroxide (H 2O2) as the oxidizer (1 wt%), and arginine (0.5 wt%) as the complexing agent was developed to polish Co at pH 10. The Eoc between Cu and Co at the above conditions was reduced to ˜20 mV compared to ˜250 mV in the absence of additives, suggestive of reduced galvanic corrosion during the Co polishing. The slurry also has the advantages of good post-polish surface quality at pH 10, and no dissolution rate. BTA at a concentration of 5mM in this slurry inhibited Cu dissolution rates and yielded a Cu/Co RR ratio of ˜0.8:1 while the open potential difference between Cu and Co was further reduced to ˜10

"We call it Springbok-German!": language contact in the German communities in South Africa.

OpenAIRE

Franke, Katharina

2017-01-01

Varieties of German are spoken all over the world, some of which have been maintained for prolonged periods of time. As a result, these transplanted varieties often show traces of the ongoing language contact as specific to their particular context. This thesis explores one such transplanted German language variety – Springbok- German – as spoken by a small subset of German Lutherans in South Africa. Specifically, this study takes as its focus eight rural German communities acr...

Wear characteristics of polished and glazed lithium disilicate ceramics opposed to three ceramic materials.

Science.gov (United States)

Saiki, Osamu; Koizumi, Hiroyasu; Akazawa, Nobutaka; Kodaira, Akihisa; Okamura, Kentaro; Matsumura, Hideo

2016-01-01

This study compared the wear characteristics of a heat-pressed lithium disilicate ceramic material opposed to feldspathic porcelain, a lithium disilicate glass ceramic, and zirconia materials. Ceramic plate specimens were prepared from feldspathic porcelain (EX-3 nA1B), lithium disilicate glass ceramics (e.max CAD MO1/C14), and zirconia (Katana KT 10) and then ground or polished. Rounded rod specimens were fabricated from heat-pressed lithium disilicate glass ceramic (e.max press LT A3) and then glazed or polished. A sliding wear testing apparatus was used for wear testing. Wear of glazed rods was greater than that of polished rods when they were abraded with ground zirconia, ground porcelain, polished porcelain, or polished lithium disilicate ceramics. For both glazed and polished rods, wear was greater when the rods were abraded with ground plates. The findings indicate that application of a polished surface rather than a glazed surface is recommended for single restorations made of heat-pressed lithium disilicate material. In addition, care must be taken when polishing opposing materials, especially those used in occlusal contact areas. (J Oral Sci 58, 117-123, 2016).

Microscopic machining mechanism of polishing based on vibrations of liquid

International Nuclear Information System (INIS)

Huang, Z G; Guo, Z N; Chen, X; Yu, Z Q; Yu, T M; Lee, W B

2007-01-01

A molecular dynamics method has been applied to study the mechanism of polishing based on vibrations of liquid. Movements of polishing particles and formations of impact dents are simulated and discussed. The abrasive effect between particle and machined substrate is evaluated empirically. Polishing qualities, including roughness and fractal character under multiple impacts, are obtained by numerical methods. Results show that the particle will vibrate and roll viscously on the substrate. Press, tear and self-organization effects will be responsible for the formation of impact dents. Simulation results are compared with experimental data to verify the conclusions

Costs and outcomes of the German disease management programme (DMP) for chronic obstructive pulmonary disease (COPD)-A large population-based cohort study.

Science.gov (United States)

Achelrod, Dmitrij; Welte, Tobias; Schreyögg, Jonas; Stargardt, Tom

2016-09-01

To curb costs and improve health outcomes in chronic obstructive pulmonary disease (COPD), a nationwide disease management programme (DMP) was introduced in Germany in 2005. Yet, its effectiveness has not been comprehensively evaluated. To examine the effects of the German COPD DMP over three years on costs and health resource utilisation from the payer perspective, process quality, morbidity and mortality. A retrospective, population-based cohort study design is applied, using administrative data. After eliminating differences in observable characteristics between the DMP and the control group with entropy balancing, difference-in-difference estimators were computed to account for time-invariant unobservable heterogeneity. 215,104 individuals were included into the analysis of whom 25,269 were enrolled in the DMP. DMP patients had a reduced mortality hazard ratio (0.89, 95%CI: 0.84-0.94) but incurred excess costs of €553 per year. DMP enrolees reveal higher healthcare utilisation with larger shares of individuals being hospitalised (3.14%), consulting an outpatient clinic due to exacerbations (11.13%) and pharmaceutical prescriptions (2.78). However, average length of hospitalisation due to COPD fell by 0.49 days, adherence to medication guidelines as well as indicators for morbidity improved. The German COPD DMP achieved significant improvements in mortality, morbidity and process quality, but at higher costs. Given the low ICER per life year gained, DMP COPD may constitute a cost-effective option to promote COPD population health. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

German version of the intuitive eating scale: Psychometric evaluation and application to an eating disordered population.

Science.gov (United States)

van Dyck, Zoé; Herbert, Beate M; Happ, Christian; Kleveman, Gillian V; Vögele, Claus

2016-10-01

Intuitive eating has been described to represent an adaptive eating behaviour that is characterised by eating in response to physiological hunger and satiety cues, rather than situational and emotional stimuli. The Intuitive Eating Scale-2 (IES-2) has been developed to measure such attitudes and behaviours on four subscales: unconditional permission to eat (UPE), eating for physical rather than emotional reasons (EPR), reliance on internal hunger and satiety cues (RHSC), and body-food choice congruence (B-FCC). The present study aimed at validating the psychometric properties of the German translation of the IES-2 in a large German-speaking sample. A second objective was to assess levels of intuitive eating in participants with an eating disorder diagnosis (anorexia nervosa, bulimia nervosa, or binge eating disorder). The proposed factor structure of the IES-2 could be confirmed for the German translation of the questionnaire. The total score and most subscale scores were negatively related to eating disorder symptomatology, problems in appetite and emotional awareness, body dissatisfaction, and self-objectification. Women with eating disorders had significantly lower values on all IES-2 subscale scores and the total score than women without an eating disorder diagnosis. Women with a binge eating disorder (BED) diagnosis had higher scores on the UPE subscale compared to participants with anorexia nervosa (AN) or bulimia nervosa (BN), and those diagnosed with AN had higher scores on the EPR subscale than individuals with BN or BED. We conclude that the German IES-2 constitutes a useful self-report instrument for the assessment of intuitive eating in German-speaking samples. Further studies are warranted to evaluate psychometric properties of the IES-2 in different samples, and to investigate its application in a clinical setting. Copyright © 2016 Elsevier Ltd. All rights reserved.

The risk of coronary heart disease of seafarers on vessels sailing under a German flag.

Science.gov (United States)

Oldenburg, Marcus; Jensen, Hans-Joachim; Latza, Ute; Baur, Xaver

2010-01-01

This study aimed to predict the risk of coronary heart disease (CHD) among seafarers on German-flagged vessels and to assess the association of shipboard job duration at sea with the risk of CHD. During the legally required medical fitness test for nautical service, 161 seafarers in Hamburg participated in a cross-sectional study which included an interview, blood sampling, and blood pressure measurements (response 84.9%). The predicted 10-year risk of an acute coronary event of the examined German seafarers aged 35 to 64 years (n = 46) was assessed in comparison with a sample of male German employees of the same age working ashore (PROCAM study). The number of independent CHD risk factors (according to the PROCAM study) was compared in the groups with 'shorter' and 'longer' median shipboard job duration at sea (15.0 years). The examined German seafarers had a similar age-standardized predicted 10-year CHD risk as the German reference population. Nearly all independent CHD risk factors were significantly more frequent in seamen with job duration at sea of ≥ 15 years than in those with 〈 15 years. After adjusting for age, the number of CHD risk factors was associated with job duration (OR 1.08 [95% CI 1.02-1.14] per year). Seafarers on German-flagged ships have to attend a medical fitness test for nautical service every 2 years. Thus, it can be assumed that seafarers present a healthier population than employees ashore. In this study, however, CHD risk of seafarers was similar to that of the reference population. This may indicate that working onboard implies a high coronary risk. Furthermore, the study results suggest a tendency of increased risk of CHD among seafarers with longer job duration at sea.

Models of nanoparticles movement, collision, and friction in chemical mechanical polishing (CMP)

Energy Technology Data Exchange (ETDEWEB)

Ilie, Filip, E-mail: filip@meca.omtr.pub.ro [Polytechnic University of Bucharest, Department of Machine Elements and Tribology (Romania)

2012-03-15

Nanoparticles have been widely used in polishing slurry such as chemical mechanical polishing (CMP) process. The movement of nanoparticles in polishing slurry and the interaction between nanoparticles and solid surface are very important to obtain an atomic smooth surface in CMP process. Polishing slurry contains abrasive nanoparticles (with the size range of about 10-100 nm) and chemical reagents. Abrasive nanoparticles and hydrodynamic pressure are considered to cause the polishing effect. Nanoparticles behavior in the slurry with power-law viscosity shows great effect on the wafer surface in polishing process. CMP is now a standard process of integrated circuit manufacturing at nanoscale. Various models can dynamically predict the evolution of surface topography for any time point during CMP. To research, using a combination of individual nanoscale friction measurements for CMP of SiO{sub 2}, in an analytical model, to sum these effects, and the results scale CMP experiments, can guide the research and validate the model. CMP endpoint measurements, such as those from motor current traces, enable verification of model predictions, relating to friction and wear in CMP and surface topography evolution for different types of CMP processes and patterned chips. In this article, we explore models of the microscopic frictional force based on the surface topography and present both experimental and theoretical studies on the movement of nanoparticles in polishing slurry and collision between nanoparticles, as well as between the particles and solid surfaces in time of process CMP. Experimental results have proved that the nanoparticle size and slurry properties have great effects on the polishing results. The effects of the nanoparticle size and the slurry film thickness are also discussed.

Effects of air-polishing powders on color stability of composite resins.

Science.gov (United States)

Güler, Ahmet Umut; Duran, Ibrahim; Yücel, Ali Çağin; Ozkan, Pelin

2011-10-01

The purpose of this study was to investigate the effect of different air-polishing powders on the color stability of different types of composite resin restorative materials. Thirty cylindrical specimens (15×2 mm) were prepared for each of 7 composite resin restorative materials. All specimens were polished with a series of aluminum oxide polishing discs (Sof-Lex). The prepared specimens of each composite resin were randomly divided into 3 groups of 10 specimens each, for control (Group-C) and two air-powder applications (Group-CP: Cavitron Prophy-Jet; Group-PS: Sirona ProSmile prophylaxis powder). A standard air-polishing unit (ProSmile Handly) was used. All specimens were air-powdered for 10 s at 4-bar pressure. The distance of the spray nosel from the specimens was approximately 10 mm and angulation of the nosel was 90°. Specimens were stored in 100 mL of coffee (Nescafe Classic) for 24 h at 37°C. Color measurement of all specimens was recorded before and after exposure to staining agent with a colorimeter (Minolta CR-300). Color differences (∆E*) between the 2 color measurements (baseline and after 24 h storage) were calculated. The data were analyzed with a 2-way ANOVA test, and mean values were compared by the Tukey HSD test (p.05) and these groups demonstrated the highest ∆E* values. For Filtek Silorane and IntenS, the highest ∆E* values were observed in Group-PS. The lowest ∆E* values for all composite resin groups were observed in Group-C. When comparing the 7 composite resin restorative materials, Aelite Aesthetic Enemal demonstrated significantly less ∆E* values than the other composite resins tested. The highest ∆E* values were observed in Quixfil. Except for Quixfil, all control groups of composite resins that were polished Sof-Lex exhibited clinically acceptable ∆E values (<3.7). Air-polishing applications increased the color change for all composite resin restorative materials tested. Composite restorations may require re-polishing

Effects of air-polishing powders on color stability of composite resins

Directory of Open Access Journals (Sweden)

Ahmet Umut Güler

2011-10-01

Full Text Available OBJECTIVES: The purpose of this study was to investigate the effect of different air-polishing powders on the color stability of different types of composite resin restorative materials. MATERIAL AND METHODS: Thirty cylindrical specimens (15×2 mm were prepared for each of 7 composite resin restorative materials. All specimens were polished with a series of aluminum oxide polishing discs (Sof-Lex. The prepared specimens of each composite resin were randomly divided into 3 groups of 10 specimens each, for control (Group-C and two air-powder applications (Group-CP: Cavitron Prophy-Jet; Group-PS: Sirona ProSmile prophylaxis powder. A standard air-polishing unit (ProSmile Handly was used. All specimens were air-powdered for 10 s at 4-bar pressure. The distance of the spray nosel from the specimens was approximately 10 mm and angulation of the nosel was 90°. Specimens were stored in 100 mL of coffee (Nescafe Classic for 24 h at 37°C. Color measurement of all specimens was recorded before and after exposure to staining agent with a colorimeter (Minolta CR-300. Color differences (∆E* between the 2 color measurements (baseline and after 24 h storage were calculated. The data were analyzed with a 2-way ANOVA test, and mean values were compared by the Tukey HSD test (p.05 and these groups demonstrated the highest ∆E* values. For Filtek Silorane and IntenS, the highest ∆E* values were observed in Group-PS. The lowest ∆E* values for all composite resin groups were observed in Group-C. When comparing the 7 composite resin restorative materials, Aelite Aesthetic Enemal demonstrated significantly less ∆E* values than the other composite resins tested. The highest ∆E* values were observed in Quixfil. CONCLUSION: Except for Quixfil, all control groups of composite resins that were polished Sof-Lex exhibited clinically acceptable ∆E values (<3.7. Air-polishing applications increased the color change for all composite resin restorative materials

Material removal mechanisms in electrochemical-mechanical polishing of tantalum

International Nuclear Information System (INIS)

Gao, F.; Liang, H.

2009-01-01

Material removal mechanisms in tantalum chemical-mechanical polishing (CMP) and electrochemical-mechanical polishing (ECMP) were investigated using the single frequency electrochemical impedance spectroscopy (EIS). Through measuring the impedance of the tantalum surface, the single frequency EIS scan made it possible to observe the CMP and ECMP processes in situ. The impedance results presented competing mechanisms of removal and formation of a surface oxide layer of tantalum. Analysis indicated that the thickness of the oxide layer formed during polishing was related to the mechanical power correlated to the friction force and the rotating speed. Furthermore, the rate of growth and removal of the oxide film was a function of the mechanical power. This understanding is beneficial for optimization of CMP and ECMP processes.

[Polish medical ethics in the period 1945-1980].

Science.gov (United States)

Wichrowski, Marek

2003-01-01

The purpose of this article is o present that main currents of Polish medical ethics in the years 1945-1980, which the author treats as the 'prehistory' of Poland's contemporary bioethics. The author begins by ascertaining the post-war disappearance of two Polish traditions--that of the Warsaw school of philosopher-physicians (known in the West as the Polish School of Philosophy of Medicine) and the Lwów-Warsaw School of Philosophy. The political system that come into being after 1945 was not conducive to the development of medical ethics, but several clear orientations may be discerned in the utterances of physicians, lawyers, moral technologlans and academic philosophers. The analysis begins with Catholic ethics in its archaic 1950s-vintage form. The author then presents the thinking of ethicians Independent of both the Church and Marxism (the milieu of the journal 'Etyka') as well as the deontological writings of physicians.

Genetic diversity in German draught horse breeds compared with a group of primitive, riding and wild horses by means of microsatellite DNA markers.

Science.gov (United States)

Aberle, K S; Hamann, H; Drögemüller, C; Distl, O

2004-08-01

We compared the genetic diversity and distance among six German draught horse breeds to wild (Przewalski's Horse), primitive (Icelandic Horse, Sorraia Horse, Exmoor Pony) or riding horse breeds (Hanoverian Warmblood, Arabian) by means of genotypic information from 30 microsatellite loci. The draught horse breeds included the South German Coldblood, Rhenish German Draught Horse, Mecklenburg Coldblood, Saxon Thuringa Coldblood, Black Forest Horse and Schleswig Draught Horse. Despite large differences in population sizes, the average observed heterozygosity (H(o)) differed little among the heavy horse breeds (0.64-0.71), but was considerably lower than in the Hanoverian Warmblood or Icelandic Horse population. The mean number of alleles (N(A)) decreased more markedly with declining population sizes of German draught horse breeds (5.2-6.3) but did not reach the values of Hanoverian Warmblood (N(A) = 6.7). The coefficient of differentiation among the heavy horse breeds showed 11.6% of the diversity between the heavy horse breeds, as opposed to 21.2% between the other horse populations. The differentiation test revealed highly significant genetic differences among all draught horse breeds except the Mecklenburg and Saxon Thuringa Coldbloods. The Schleswig Draught Horse was the most distinct draught horse breed. In conclusion, the study demonstrated a clear distinction among the German draught horse breeds and even among breeds with a very short history of divergence like Rhenish German Draught Horse and its East German subpopulations Mecklenburg and Saxon Thuringa Coldblood.

Polish adaptation of scoliosis research society-22 questionnaire.

Science.gov (United States)

Glowacki, Maciej; Misterska, Ewa; Laurentowska, Maria; Mankowski, Przemyslaw

2009-05-01

Polish adaptation of the original version of Scoliosis Research Society (SRS) instrument. The transcultural adaptation of SRS-22 and evaluation of its internal consistency. High psychometric value of the SRS-22 Questionnaire has made it an effective evaluation instrument in clinically assessing the functional status of patients with adolescent idiopathic scoliosis. First, 2 translators translated the original version into Polish. Afterwards, the translators identified differences between the translations and produced a consensus version. In the third stage, 2 native English speakers produced back translations. Finally, a team of 2 orthopedic surgeons, translators, a statistician and a psychologist reviewed all the translations to produce a prefinal version. The questionnaire was administered to 60 girls at the age of 16.6, SD 2.0 with adolescent idiopathic scoliosis treated with the Cotrel-Dubousset method in Pediatric Orthopaedics and Traumatology Clinic in Poznań. The internal consistency in the Polish version equaled 0.89 for the overall result and 0.81 for function, 0.81 for pain, 0.80 for mental health, 0.77 for self-image, and 0.69 for treatment satisfaction domains, respectively. The Polish version of SRS-22 is characterized by high internal consistency for all domains and for the overall score, which makes it an evaluation tool after surgical treatment compatible with the original SRS-22.

Word order in the Germanic languages

DEFF Research Database (Denmark)

Holmberg, Anders; Rijkhoff, Jan

1998-01-01

The Germanic branch of Indo-European consists of three main groups (Ruhlen 1987: 327):- East Germanic: Gothic, Vandalic, Burgundian (all extinct);- North Germanic (or: Scandinavian): Runic (extinct), Danish, Swedish, Norwegian, Icelandic, Faroese;- West Germanic: German, Yiddish, Luxembourgeois, ...

Anthropometric Study of the Piriformis Muscle and Sciatic Nerve: A Morphological Analysis in a Polish Population

Science.gov (United States)

Haładaj, Robert; Pingot, Mariusz; Polguj, Michał; Wysiadecki, Grzegorz; Topol, Mirosław

2015-01-01

Background The aim of this study was to determine relationships between piriformis muscle (PM) and sciatic nerve (SN) with reference to sex and anatomical variations. Material/Methods Deep dissection of the gluteal region was performed on 30 randomized, formalin-fixed human lower limbs of adults of both sexes of the Polish population. Anthropometric measurements were taken and then statistically analyzed. Results The conducted research revealed that, apart from the typical structure of the piriformis muscle, the most common variation was division of the piriformis muscle into two heads, with the common peroneal nerve running between them (20%). The group with anatomical variations of the sciatic nerve course displayed greater diversity of morphometric measurement results. There was a statistically significant correlation between the lower limb length and the distance from the sciatic nerve to the greater trochanter in the male specimens. On the other hand, in the female specimens, a statistically significant correlation was observed between the lower limb length and the distance from the sciatic nerve to the ischial tuberosity. The shortest distance from the sciatic nerve to the greater trochanter measured at the level of the inferior edge of the piriformis was 21 mm, while the shortest distance to the ischial tuberosity was 63 mm. Such correlations should be taken into account during invasive medical procedures performed in the gluteal region. Conclusions It is possible to distinguish several anatomical variations of the sciatic nerve course within the deep gluteal region. The statistically significant correlations between some anthropometric measurements were only present within particular groups of male and female limbs. PMID:26629744

SAFETY PLATFORM OF POLISH TRANSPORT

Directory of Open Access Journals (Sweden)

Katarzyna CHRUZIK

2016-03-01

Full Text Available Analyzing the level of Polish transport safety culture can be seen that it is now dependent on the culture of safety management within the organization and the requirements and recommendations of law in this field for different modes of transport (air, rail, road, water. Of the four basic types of transport requirements are widely developed in the aviation, rail, and water – the sea. In order to harmonize the requirements for transport safety so it appears advisable to develop a platform for exchange of safety information for different modes of transport, and the development of good practices multimodal offering the possibility of improving Polish transport safety. Described in the publication of the proposal in addition to the alignment platform experience and knowledge in the field of transport safety in all its kinds, it can also be a tool for perfecting new operators of public transport.

Effect finishing and polishing procedures on the surface roughness of IPS Empress 2 ceramic.

Science.gov (United States)

Boaventura, Juliana Maria Capelozza; Nishida, Rodrigo; Elossais, André Afif; Lima, Darlon Martins; Reis, José Mauricio Santos Nunes; Campos, Edson Alves; de Andrade, Marcelo Ferrarezi

2013-01-01

To evaluate the surface roughness of IPS Empress 2 ceramic when treated with different finishing/polishing protocols. Sixteen specimens of IPS Empress 2 ceramic were made from wax patterns obtained using a stainless steel split mold. The specimens were glazed (Stage 0-S0, control) and divided into two groups. The specimens in Group 1 (G1) were finished/polished with a KG Sorensen diamond point (S1), followed by KG Sorensen siliconized points (S2) and final polishing with diamond polish paste (S3). In Group 2 (G2), the specimens were finished/polished using a Shofu diamond point (S1), as well as Shofu siliconized points (S2) and final polishing was performed using Porcelize paste (S3). After glazing (S0) and following each polishing procedure (S1, S2 or S3), the surface roughness was measured using TALYSURF Series 2. The average surface roughness results were analyzed using ANOVA followed by Tukey post-hoc tests (α = 0.01) RESULTS: All of the polishing procedures yielded higher surface roughness values when compared to the control group (S0). S3 yielded lower surface roughness values when compared to S1 and S2. The proposed treatments negatively affected the surface roughness of the glazed IPS Empress 2 ceramic.

The effects of different polishing techniques on the staining resistance of CAD/CAM resin-ceramics

Science.gov (United States)

Demirci, Tevfik; Demirci, Gamze; Sagsoz, Nurdan Polat; Yildiz, Mehmet

2016-01-01

PURPOSE The purposes of this study were to evaluate the staining resistance of CAD/CAM resin-ceramics polished with different techniques and to determine the effectiveness of the polishing techniques on resin-ceramics, comparing it with that of a glazed glass-ceramic. MATERIALS AND METHODS Four different CAD/CAM ceramics (feldspathic ceramic: C-CEREC Blocs, (SIRONA) and three resin-ceramics: L-Lava Ultimate, (3M ESPE), E-Enamic, (VITA) and CS-CeraSmart, (GC)) and one light cure composite resin: ME-Clearfil Majesty Esthetic (Kuraray) were used. Only C samples were glazed (gl). Other restorations were divided into four groups according to the polishing technique: nonpolished control group (c), a group polished with light cure liquid polish (Biscover LV BISCO) (bb), a group polished with ceramic polishing kit (Diapol, EVE) (cd), and a group polished with composite polishing kit (Clearfil Twist Dia, Kuraray) (kc). Glazed C samples and the polished samples were further divided into four subgroups and immersed into different solutions: distilled water, tea, coffee, and fermented black carrot juice. Eight samples (8 × 8 × 1 mm) were prepared for each subgroup. According to CIELab system, four color measurements were made: before immersion, immersion after 1 day, after 1 week, and after 1 month. Data were analyzed with repeated measures of ANOVA (α=.05). RESULTS The highest staining resistance was found in gl samples. There was no difference among gl, kc and cd (P>.05). Staining resistance of gl was significantly higher than that of bb (PCeramic and composite polishing kits can be used for resin ceramics as a counterpart of glazing procedure used for full ceramic materials. Liquid polish has limited indications for resin ceramics. PMID:28018558

High voltage performance of a dc photoemission electron gun with centrifugal barrel-polished electrodes

Science.gov (United States)

Hernandez-Garcia, C.; Bullard, D.; Hannon, F.; Wang, Y.; Poelker, M.

2017-09-01

The design and fabrication of electrodes for direct current (dc) high voltage photoemission electron guns can significantly influence their performance, most notably in terms of maximum achievable bias voltage. Proper electrostatic design of the triple-point junction shield electrode minimizes the risk of electrical breakdown (arcing) along the insulator-cable plug interface, while the electrode shape is designed to maintain work, we describe a centrifugal barrel-polishing technique commonly used for polishing the interior surface of superconducting radio frequency cavities but implemented here for the first time to polish electrodes for dc high voltage photoguns. The technique reduced polishing time from weeks to hours while providing surface roughness comparable to that obtained with diamond-paste polishing and with unprecedented consistency between different electrode samples. We present electrode design considerations and high voltage conditioning results to 360 kV (˜11 MV/m), comparing barrel-polished electrode performance to that of diamond-paste polished electrodes. Tests were performed using a dc high voltage photogun with an inverted-geometry ceramic insulator design.

Polishing and toothbrushing alters the surface roughness and gloss of composite resins.

Science.gov (United States)

Kamonkhantikul, Krid; Arksornnukit, Mansuang; Takahashi, Hidekazu; Kanehira, Masafumi; Finger, Werner J

2014-01-01

This study aimed to investigate the surface roughness and gloss of composite resins after using two polishing systems and toothbrushing. Six composite resins (Durafill VS, Filtek Z250, Filtek Z350 XT, Kalore, Venus Diamond, and Venus Pearl) were evaluated after polishing with two polishing systems (Sof-Lex, Venus Supra) and after toothbrushing up to 40,000 cycles. Surface roughness (Ra) and gloss were determined for each composite resin group (n=6) after silicon carbide paper grinding, polishing, and toothbrushing. Two-way ANOVA indicated significant differences in both Ra and gloss between measuring stages for the composite resins tested, except Venus Pearl, which showed significant differences only in gloss. After polishing, the Filtek Z350 XT, Kalore, and Venus Diamond showed significant increases in Ra, while all composite resin groups except the Filtek Z350 XT and Durafill VS with Sof-Lex showed increases in gloss. After toothbrushing, all composite resin demonstrated increases in Ra and decreases in gloss.

Polish students at the Académie Julian until 1919

Directory of Open Access Journals (Sweden)

Zgórniak, Marek

2012-08-01

Full Text Available The subject of the article is the presence of Polish students in the most important private artistic school in Paris in the second half of the 19thcentury. The extant records regarding the atelier for male students made it possible to compile a list of about 165 Polish painters and sculptors studying there in the period from 1880 to 1919. The text presents the criteria used when preparing the list and the diagrams show the fluctuations in registration and the number of Polish artists in particular ateliers in successive years. The observations contained in the article have a summary nature and are illustrated only with selected examples.

Neologisms in bilingual digital dictionaries (on the example of Bulgarian-Polish dictionary

Directory of Open Access Journals (Sweden)

Ludmila Dimitrova

2015-11-01

Full Text Available Neologisms in bilingual digital dictionaries (on the example of Bulgarian-Polish dictionary The paper discusses the presentation of neologisms in the recent version of the Bulgarian-Polish digital dictionary. We also continue the discussion of important problems related to the classifiers of the verbs as headwords of the digital dictionary entries. We analyze some examples from ongoing experimental version of the Bulgarian-Polish digital dictionary.

[A study of different polishing techniques for amalgams and glass-cermet cement by scanning electron microscope (SEM)].

Science.gov (United States)

Kakaboura, A; Vougiouklakis, G; Argiri, G

1989-01-01

Finishing and polishing an amalgam restoration, is considered as an important and necessary step of the restorative procedure. Various polishing techniques have been recommended to success a smooth amalgam surface. The aim of this study was to investigate the influence of three different polishing treatments on the marginal integrity and surface smoothness of restorations made of three commercially available amalgams and a glass-cermet cement. The materials used were the amalgams, Amalcap (Vivadent), Dispersalloy (Johnson and Johnson), Duralloy (Degussa) and the glass-cermet Katac-Silver (ESPE). The occlusal surfaces of the restorations were polished by the methods: I) round bur, No4-rubber cup-zinc oxide paste in a small brush, II) round bur No 4-bur-brown, green and super green (Shofu) polishing cups and points successively and III) amalgam polishing bur of 12-blades-smooth amalgam polishing bur. Photographs from unpolished and polished surfaces of the restorations, were taken with scanning electron microscope, to evaluate the polishing techniques. An improvement of marginal integrity and surface smoothness of all amalgam restorations was observed after the specimens had been polished with the three techniques. Method II, included Shofu polishers, proved the best results in comparison to the methods I and III. Polishing of glass-cermet cement was impossible with the examined techniques.

Comparison of three different fetometric formulas of ICC and BP for calculating the parturition date in a population of German Shepherd.

Science.gov (United States)

Socha, Piotr; Janowski, Tomasz

2017-06-01

The aim of this study was to evaluate the suitability of three different formulas to predict the parturition date in German Shepherds, using the ultrasonographic fetometry method involving inner chorionic cavity diameter (ICC) and biparietal diameter (BP) measurements in the same population of a single breed. Overall, 53 ICC and 42 BP measurements were taken on 34 bitches. The measured values were substituted into breed-specific formulas for the German Shepherd as well as non-specific formulas for medium-sized bitches. Comparisons of clinical accuracy and statistical analyses of regression lines were performed to test the compatibility of the formulas used. We confirmed the similarity of our clinical results to outcomes obtained using the one breed-specific (Groppetti et al. 2015) and non-specific fetometry models (Luvoni and Grioni 2000), whereas another breed-specific formula (Milani et al. 2013) showed rather low accuracy. Comparing the clinical accuracy of the three formulas, the authors demonstrated that the Luvoni and Grioni (2000) formula for ICC dedicated to medium-sized dogs can also be effectively used in the German Shepherd, even with better results than breed-specific formulas by Groppetti et al. (2015). By contrast, the evaluation of BP formulas proves the successful usage of the Groppetti et al. (2015) formula to determine the date of birth by measuring scull bone structures (p < 0.05). The statistical analysis of regression lines were in agreement with the clinical results and confirmed the higher predictability of Groppetti et al. (2015) and Luvoni and Grioni (2000) formulas, than those of Milani et al. (2013). Copyright © 2017 Elsevier Inc. All rights reserved.

Gloss and surface roughness produced by polishing kits on resin composites.

Science.gov (United States)

Sadidzadeh, Ramtin; Cakir, Deniz; Ramp, Lance C; Burgess, John O

2010-08-01

To compare in vitro the surface roughness (Ra) and gloss (G) produced by three conventional and one experimental polishing kits on four resin composites. 24 discs were prepared (d = 12 mm, t = 4 mm) for each resin composite: Filtek Supreme Plus Body/A2 (FSB), Yellow Translucent (FST), Heliomolar/A2 (HM), and EsthetX/A2 (EX) following the manufacturers' instructions. They were finished with 320 grit silicon carbide paper for 80 seconds each. Polishing systems: Sof-Lex, Enhance-Pogo, Astropol and Experimental Discs/EXL-695, were applied following manufacturers' instructions. Each specimen was ultrasonically cleaned with distilled water and dried. Gloss and Ra were measured with a small area glossmeter (Novo-curve) and non-contact profilometer (Proscan 2000) following ISO 4288, respectively. The results were evaluated by two-way ANOVA followed by separate one-way ANOVA and Tukey/Kramer test (P = 0.05). There was a significant interaction of surface roughness and gloss between the composites and polishing systems (P gloss was obtained for FSB composite polished with the Experimental kit. The experimental polishing system produced smoothest surfaces (P gloss (P < 0.05).

[Adhesion of oral microorganisms on dental porcelain polished and glazed].

Science.gov (United States)

Wang, Yi-ning; Wen, Guo-jiang; Shi, Bin; Pan, Xin-hua

2003-09-01

This study compared the roughness of porcelain polished or glazed surfaces and the adhesion of oral streptococcus mutans to them in vitro. 30 porcelain samples were made. Porcelain samples in group A were polished with diamond paste. Porcelain samples were glazed in group B and were polished with Al2O3 (240#) bur in group C. Their roughness values were measured by profilometer. Standardized cell suspensions were incubated with test samples for one hour at 37 degrees C, then retained cells were counted by image analysis (percentage area of a microscopic field covered by cells). Roughness values of group A, B, C were respectively (0.1987 +/- 0.057) microm, (0.1990 +/- 0.091) microm, (0.4260 +/- 0.174) microm. There was no significantly difference between group A and group B. The roughness samples in group C were significantly rougher than that in the other groups. The amount of retained cells in group A, group B, group C was respectively (15.92 +/- 4.37)%, (16.39 +/- 6.31)% and (41.48 +/- 12.1)%. There was no significant difference between the cell adhesion on porcelain surface glazed and polished, but more bacteria adhered on the porcelain surface in group C. Porcelain surface polished treatment was clinically acceptable compared with its glazed. They all exhibited the least amount of bacteria adhesion. The more porcelain surface was rough, the more bacteria adhered on it.

Electrochemical Polishing Applications and EIS of a Vitamin B4-Based Ionic Liquid

International Nuclear Information System (INIS)

Wixtrom, Alex I.; Buhler, Jessica E.; Reece, Charles E.; Abdel-Fattah, Tarek M.

2013-01-01

Modern particle accelerators require minimal interior surface roughness for Niobium superconducting radio frequency (SRF) cavities. Polishing of the Nb is currently achieved via electrochemical polishing with concentrated mixtures of sulfuric and hydrofluoric acids. This acid-based approach is effective at reducing the surface roughness to acceptable levels for SRF use, but due to acid-related hazards and extra costs (including safe disposal of used polishing solutions), an acid-free method would be preferable. This study focuses on an alternative electrochemical polishing method for Nb, using a novel ionic liquid solution containing choline chloride, also known as Vitamin B 4 (VB 4 ). Potentiostatic electrochemical impedance spectroscopy (EIS) was also performed on the VB4-based system. Nb polished using the VB4-based method was found to have a final surface roughness comparable to that achieved via the acid-based method, as assessed by atomic force microscopy (AFM). These findings indicate that acid-free VB 4 -based electrochemical polishing of Nb represents a promising replacement for acid-based methods of SRF cavity preparation

Time-dependent protection of ground and polished Cu using graphene film

International Nuclear Information System (INIS)

Dong, Yuhua; Liu, Qingqing; Zhou, Qiong

2015-01-01

Highlights: • Graphene was deposited on polished and ground Cu sheets by CVD. • Graphene films provide better protection to polished Cu for short time. • Multilayer graphene films provide better protection for short time. - Abstract: Graphene was deposited on Cu sheets with different morphologies by chemical vapor deposition. Scanning electron microscopy (SEM) analysis indicated that the morphology of the Cu sheet affected the graphene film properties. Electrochemical impedance spectroscopy measurements showed that the graphene film did not effectively protect Cu against corrosion because of prolonged exposure to ionic environments (3.5 wt.% NaCl solution). For short durations, graphene films provided better protection to polished Cu than ground Cu. Prolonged electrolyte immersion of graphene-coated Cu samples showed that the graphene film from the polished Cu surface was detached more easily than that from ground Cu

Effect of polishing time and pressure on quality characteristics of rice grain

International Nuclear Information System (INIS)

Karim, M.A.

2002-01-01

Since totally unpolished rice has poor cooking quality, a certain amount of polishing for the removal of the outermost bran layers is essential. To determine the best combination of polishing time and pressure with respect to obtaining optimum quantity/quality, the brown rice (head grains) of a rice strain 4048 was milled for 10, 20, 30 and 40 seconds against 1,2,3,4 and 5 lbs pressure in a Burrows McGill Polisher No. 3. the quality characteristics studied were: total milling recovery, head rice recovery, whiteness of milled rice, protein content of grain, grain length and bursting upon cooking. Both, total milled rice and head rice reduced while the whiteness of milled rice improved significantly with an increase in polishing time and or pressure. The protein content decreased gradually with an increase in time and pressure of milling but the effect was non significant. The cooked grain length increased with an increase in milling degree up to a stage, beyond which it declined. The increase in bursting of grains on cooking. A combination of 20 seconds polishing time with 2 lbs pressure or 20 seconds polishing time with 3 lbs pressure was found to be the best combination of obtaining the optimum quality as well as the quality of milled rice.(author)

Gaussian Graphical Models Identify Networks of Dietary Intake in a German Adult Population.

Science.gov (United States)

Iqbal, Khalid; Buijsse, Brian; Wirth, Janine; Schulze, Matthias B; Floegel, Anna; Boeing, Heiner

2016-03-01

Data-reduction methods such as principal component analysis are often used to derive dietary patterns. However, such methods do not assess how foods are consumed in relation to each other. Gaussian graphical models (GGMs) are a set of novel methods that can address this issue. We sought to apply GGMs to derive sex-specific dietary intake networks representing consumption patterns in a German adult population. Dietary intake data from 10,780 men and 16,340 women of the European Prospective Investigation into Cancer and Nutrition (EPIC)-Potsdam cohort were cross-sectionally analyzed to construct dietary intake networks. Food intake for each participant was estimated using a 148-item food-frequency questionnaire that captured the intake of 49 food groups. GGMs were applied to log-transformed intakes (grams per day) of 49 food groups to construct sex-specific food networks. Semiparametric Gaussian copula graphical models (SGCGMs) were used to confirm GGM results. In men, GGMs identified 1 major dietary network that consisted of intakes of red meat, processed meat, cooked vegetables, sauces, potatoes, cabbage, poultry, legumes, mushrooms, soup, and whole-grain and refined breads. For women, a similar network was identified with the addition of fried potatoes. Other identified networks consisted of dairy products and sweet food groups. SGCGMs yielded results comparable to those of GGMs. GGMs are a powerful exploratory method that can be used to construct dietary networks representing dietary intake patterns that reveal how foods are consumed in relation to each other. GGMs indicated an apparent major role of red meat intake in a consumption pattern in the studied population. In the future, identified networks might be transformed into pattern scores for investigating their associations with health outcomes. © 2016 American Society for Nutrition.

How to Investigate Polish Clusters’ Attractiveness for Inward FDI? Addressing Ambiguity Problem

Directory of Open Access Journals (Sweden)

Götz Marta

2014-09-01

Full Text Available The aim of the paper is to assess whether, and in what fashion, managers of Polish cluster organizations perceive the attractiveness of foreign direct investment in Polish clusters This research is exploratory and qualitative in nature. The complex nature of Polish clusters, which can benefit from and be competitively challenged by, FDI are identified and a conceptual framework for assessing that nature is proposed; specifically, research using the grounded theory method (GTM.

DIFFERENTIATION OF BODY COMPOSITION OF PLAYERS OF THE POLISH NATIONAL BASEBALL TEAM

Directory of Open Access Journals (Sweden)

Marina Jagiełło

2014-10-01

Full Text Available The purpose of the study is to identify the differentiation of body composition among players of Polish national baseball team in comparison to persons of the same population not professionally engaged in sport. The study involved Polish baseball representatives (n=20. Competitors’ age was 18-28 years, body mass from 67.7 kg to 114 kg (85±10.3 kg, and body height 173-196 cm (185.1±4.8. The training experience was 7-14 years and it was highly differentiated. The stoutness factor is the dominant factor among "infielders" and "pitchers", and among "outfielders" - the length one. The proportions of the features within the factors show that players are characterized by a strongly muscled forearm and a shank and by a clear predominance of the elbow width with a disproportionately - to the overall size of the factor - small knee and shoulder width. In the length factor an even contribution of the upper and lower extremity length with lower sitting body height can be noted. Depending on the position on the field there is a differentiation of the internal proportions of the body.

Robotic Automation in Computer Controlled Polishing

Science.gov (United States)

Walker, D. D.; Yu, G.; Bibby, M.; Dunn, C.; Li, H.; Wu, Y.; Zheng, X.; Zhang, P.

2016-02-01

We first present a Case Study - the manufacture of 1.4 m prototype mirror-segments for the European Extremely Large Telescope, undertaken by the National Facility for Ultra Precision Surfaces, at the OpTIC facility operated by Glyndwr University. Scale-up to serial-manufacture demands delivery of a 1.4 m off-axis aspheric hexagonal segment with surface precision robots and computer numerically controlled ('CNC') polishing machines for optical fabrication. The objective was not to assess which is superior. Rather, it was to understand for the first time their complementary properties, leading us to operate them together as a unit, integrated in hardware and software. Three key areas are reported. First is the novel use of robots to automate currently-manual operations on CNC polishing machines, to improve work-throughput, mitigate risk of damage to parts, and reduce dependence on highly-skilled staff. Second is the use of robots to pre-process surfaces prior to CNC polishing, to reduce total process time. The third draws the threads together, describing our vision of the automated manufacturing cell, where the operator interacts at cell rather than machine level. This promises to deliver a step-change in end-to-end manufacturing times and costs, compared with either platform used on its own or, indeed, the state-of-the-art used elsewhere.

ROUGHNESS ANALYSIS OF VARIOUSLY POLISHED NIOBIUM SURFACES

Energy Technology Data Exchange (ETDEWEB)

Ribeill, G.; Reece, C.

2008-01-01

Niobium superconducting radio frequency (SRF) cavities have gained widespread use in accelerator systems. It has been shown that surface roughness is a determining factor in the cavities’ effi ciency and maximum accelerating potential achievable through this technology. Irregularities in the surface can lead to spot heating, undesirable local electrical fi eld enhancement and electron multipacting. Surface quality is typically ensured through the use of acid etching in a Buffered Chemical Polish (BCP) bath and electropolishing (EP). In this study, the effects of these techniques on surface morphology have been investigated in depth. The surface of niobium samples polished using different combinations of these techniques has been characterized through atomic force microscopy (AFM) and stylus profi lometry across a range of length scales. The surface morphology was analyzed using spectral techniques to determine roughness and characteristic dimensions. Experimentation has shown that this method is a valuable tool that provides quantitative information about surface roughness at different length scales. It has demonstrated that light BCP pretreatment and lower electrolyte temperature favors a smoother electropolish. These results will allow for the design of a superior polishing process for niobium SRF cavities and therefore increased accelerator operating effi ciency and power.

Multi-objective optimization of circular magnetic abrasive polishing of SUS304 and Cu materials

Energy Technology Data Exchange (ETDEWEB)

Nguyen, NhatTan; Yin, ShaoHui; Chen, FengJun; Yin, HanFeng [Hunan University, Changsha (China); Pham, VanThoan [Hanoi University, Hanoi (Viet Nam); Tran, TrongNhan [Industrial University of Ho Chi Minh City, HCM City (Viet Nam)

2016-06-15

In this paper, a Multi-objective particle swarm optimization algorithm (MOPSOA) is applied to optimize surface roughness of workpiece after circular magnetic abrasive polishing. The most important parameters of polishing model, namely current, gap between pole and workpiece, spindle speed and polishing time, were considered in this approach. The objective functions of the MOPSOA depend on the quality of surface roughness of polishing materials with both simultaneous surfaces (Ra1, Ra2), which are determined by means of experimental approach with the aid of circular magnetic field. Finally, the effectiveness of the approach is compared between the optimal results with the experimental data. The results show that the new proposed polishing optimization method is more feasible.

Etymology in the Polish Academy of Sciences Great Dictionary of ...

African Journals Online (AJOL)

The article offers an insight into etymological information provided in the Polish Academy of Sciences Great Dictionary of Polish (Pol. Wielki słownik języka polskiego PAN, WSJP PAN). The dictionary and the rules of producing the entries are briefly presented. These rules influence the way of working on etymology within ...

Antecedents of Accelerated Internationalisation of Polish and Czech Small and Medium-Sized Enterprises

Directory of Open Access Journals (Sweden)

Izabela Kowalik

2017-09-01

Full Text Available Objective: The study goal was the investigation of relationships between accelerated internationalisation descriptors and antecedent firm- and entrepreneur-related factors in Polish and Czech SMEs. Research Design & Methods: In order to compare Polish and Czech companies, the data collected in two independent studies were used. The study of 233 Polish companies was conducted with the use of CATI method in 2014; 108 Czech companies were surveyed in 2013/2014 with the use of CAWI method. In both samples half of the surveyed SME-exporters were conforming to the accelerated internationalisation criteria. Findings: In both samples the “global vision” elements and company internationalisation scale and speed were interrelated. In the Polish companies this relationship was moderated by company size. There was the lack of strong positive relationships between innovativeness and internationalisation speed and scale in both samples. Implications & Recommendations:The managerial mindset has a decisive role for accelerated internationalisation in both Czech and Polish SMEs. The innovativeness of offering is not indispensable for fast foreign expansion. Larger companies may expand abroad faster if they have internationally oriented managers. Contribution & Value Added:This work addresses a research gap concerning idiosyncrasies of internationalisation antecedents in Polish and Czech enterprises. As the results show, there is no common internationalisation pattern for Polish and Czech SMEs.

Effect of grinding and polishing on roughness and strength of zirconia.

Science.gov (United States)

Khayat, Waad; Chebib, Najla; Finkelman, Matthew; Khayat, Samer; Ali, Ala

2018-04-01

The clinical applications of high-translucency monolithic zirconia restorations have increased. Chairside and laboratory adjustments of these restorations are inevitable, which may lead to increased roughness and reduced strength. The influence of grinding and polishing on high-translucency zirconia has not been investigated. The purpose of this in vitro study was to compare the roughness averages (Ra) of ground and polished zirconia and investigate whether roughness influenced strength after aging. High-translucency zirconia disks were milled, sintered, and glazed according to the manufacturer's recommendations. Specimens were randomized to 4 equal groups. Group G received only grinding; groups GPB and GPK received grinding and polishing with different polishing systems; and group C was the (unground) control group. All specimens were subjected to hydrothermal aging in an autoclave at 134°C at 200 kPa for 3 hours. Roughness average was measured using a 3-dimensional (3D) optical interferometer at baseline (Ra1), after grinding and polishing (Ra2), and after aging (Ra3). A biaxial flexural strength test was performed at a rate of 0.5 mm/min. Statistical analyses were performed using commercial software (α=.05). Group G showed a significantly higher mean value of Ra3 (1.96 ±0.32 μm) than polished and glazed groups (P.05). Compared with baseline, the roughness of groups G and GPB increased significantly after surface treatments and after aging, whereas aging did not significantly influence the roughness of groups GPK or C. Group G showed the lowest mean value of biaxial flexural strength (879.01 ±157.99 MPa), and the highest value was achieved by group C (962.40 ±113.84 MPa); no statistically significant differences were found among groups (P>.05). Additionally, no significant correlation was detected between the Ra and flexural strength of zirconia. Grinding increased the roughness of zirconia restorations, whereas proper polishing resulted in smoothness

German support systems for onshore wind farms in the context of Polish acts limiting wind energy development

Directory of Open Access Journals (Sweden)

Dawid Leszek

2017-09-01

Full Text Available European energy system is undergoing a deep transition to low-emission energy sources, mainly wind farms. This transition is caused mostly by energy politics of European Union (EU and its goals in the topic of renewable energy. European wind energy is dominated by Germany that produces half of total wind energy in EU. The aim of this article is to present support systems for wind farms existing in Germany in the context of introducing in Poland the Act of 20 May 2016 on Wind Energy Investments limiting onshore wind farms localization and Act of 22 June 2016 introducing changes to the Act on Renewable Energy Sources (RES and some other acts. It is postulated to make amendments of acts regulating RES while considering German solutions.

Acoustic Emission Based In-process Monitoring in Robot Assisted Polishing

DEFF Research Database (Denmark)

Pilny, Lukas; Bissacco, Giuliano; De Chiffre, Leonardo

The applicability of acoustic emission (AE) measurements for in-process monitoring in the Robot Assisted Polishing (RAP) process was investigated. Surface roughness measurements require interruption of the process, proper surface cleaning and measurements that sometimes necessitate removal...... improving the efficiency of the process. It also allows for intelligent process control and generally enhances the robustness and reliability of the automated RAP system in industrial applications....... of the part from the machine tool. In this study, development of surface roughness during polishing rotational symmetric surfaces by the RAP process was inferred from AE measurements. An AE sensor was placed on a polishing tool, and a cylindrical rod of Vanadis 4E steel having an initial turned surface...

Surface changes of metal alloys and high-strength ceramics after ultrasonic scaling and intraoral polishing.

Science.gov (United States)

Yoon, Hyung-In; Noh, Hyo-Mi; Park, Eun-Jin

2017-06-01

This study was to evaluate the effect of repeated ultrasonic scaling and surface polishing with intraoral polishing kits on the surface roughness of three different restorative materials. A total of 15 identical discs were fabricated with three different materials. The ultrasonic scaling was conducted for 20 seconds on the test surfaces. Subsequently, a multi-step polishing with recommended intraoral polishing kit was performed for 30 seconds. The 3D profiler and scanning electron microscopy were used to investigate surface integrity before scaling (pristine), after scaling, and after surface polishing for each material. Non-parametric Friedman and Wilcoxon signed rank sum tests were employed to statistically evaluate surface roughness changes of the pristine, scaled, and polished specimens. The level of significance was set at 0.05. Surface roughness values before scaling (pristine), after scaling, and polishing of the metal alloys were 3.02±0.34 µm, 2.44±0.72 µm, and 3.49±0.72 µm, respectively. Surface roughness of lithium disilicate increased from 2.35±1.05 µm (pristine) to 28.54±9.64 µm (scaling), and further increased after polishing (56.66±9.12 µm, P scaling (from 1.65±0.42 µm to 101.37±18.75 µm), while its surface roughness decreased after polishing (29.57±18.86 µm, P scaling significantly changed the surface integrities of lithium disilicate and zirconia. Surface polishing with multi-step intraoral kit after repeated scaling was only effective for the zirconia, while it was not for lithium disilicate.

Asymmetric Mutual Social Perception of Austrians and Germans: A Social Identity Approach Assessing Implicit and Explicit Attitudes

Directory of Open Access Journals (Sweden)

Walter Renner

2014-07-01

Full Text Available Whereas Austrians tend to perceive Germans as "competent but cold", Germans tend to see Austrians as "incompetent but nice" in the sense of Fiske's Stereotype Content Model. With respect to the unequal distribution of power between Austria and Germany, which outnumbers Austria by approximately the tenfold population, Social Identity Theory (SIT predicts that Austrians will tend to devalue Germans, attempting to preserve their self-esteem and cultural identity, whereas Germans will perceive Austrians more positively. We tested this expectation with N = 31 Austrian and N = 49 German students at an Austrian university. Our hypotheses of asymmetrical mutual attitudes and massive devaluation of Germans by Austrians were confirmed by the Implicit Association Test, whereas on adjective lists as an explicit measure, Austrians described Germans more favourably, obviously out of a desire not to appear prejudiced. The results support SIT and have important implications for the development of Austrian academic education.

Emissions from the Polish power industry

International Nuclear Information System (INIS)

Uliasz-Bochenczyk, Alicja; Mokrzycki, Eugeniusz

2007-01-01

Poland is a country where power and heat energy production is based on conventional fuel combustion, above all hard coal and lignite. In power plants and combined heat and power plants, fossil fuel combustion results in emitting to the atmosphere first of all SO 2 , NO x , CO, particulate matter, greenhouse gases for instance N 2 O and CO 2 . For many years the Polish power industry has tried to reduce the emission of air contaminants to the atmosphere. The reduction is feasible on account of various methods of emission reduction, which have been advanced and applied for many years. The paper presents conventional fuels used in the Polish professional power industry, as well as the principal emission types occurring there for the last 10 years and the undertaken reduction measures

Auditory temporal processing tests – Normative data for Polish-speaking adults

Directory of Open Access Journals (Sweden)

Joanna Majak

2015-04-01

Full Text Available Introduction: Several subjects exposed to neurotoxins in the workplace need to be assessed for central auditory deficit. Although central auditory processing tests are widely used in other countries, they have not been standardized for the Polish population. The aim of the study has been to evaluate the range of reference values for 3 temporal processing tests: the duration pattern test (DPT, the frequency pattern test (FPT and the gaps in noise test (GIN. Material and Methods: The study included 76 normal hearing individuals (38 women, 38 men at the age of 18 to 54 years old (mean ± standard deviation: 39.4±9.1. All study participants had no history of any chronic disease and underwent a standard ENT examination. Results: The reference range for the DPT was established at 55.3% or more of correct answers, while for the FPT it stood at 56.7% or more of correct answers. The mean threshold for both ears in the GIN test was defined as 6 ms. In this study there were no significant associations between the DPT, FPT and GIN results and age or gender. Symmetry between the ears in the case of the DPT, FPT and GIN was found. Conclusions: Reference ranges obtained in this study for the DPT and FPT in the Polish population are lower than reference ranges previously published for other nations while the GIN test results correspond to those published in the related literature. Further investigations are needed to explain the discrepancies between normative values in Poland and other countries and adapt tests for occupational medicine purposes. Med Pr 2015;66(2:145–152

Social Interest in The Polish Doctrine of Monument Preservation

Science.gov (United States)

Antoszczyszyn, Marek

2017-10-01

The paper discusses a controversy surrounding the latest amendment to the text of the Polish Parliament Act Conservation and the Care of Monuments (2015). It is a common dictum that any edifice cannot exist without good foundations. In this particular case of the mentioned above Act, definition of monument appears to be such a basis. A social interest is one of the constituent elements of the definition mentioned above. In the first part of the paper the notion of the social interest expression has been discussed, particularly from national and international points of view. The second part of the paper comprises some examples from the Polish monument preservation experience with the use of comparison method supported by case study. Only three big Polish cities: Warsaw, Wroclaw and Szczecin are involved in the presented case study but it must be emphasized that many other places on Polish territory experienced the same. Basing on the faith of these cities, the results and discussion chapter proves fundamental discrepancy in social interest notion between national and international scopes using some analytical methods. Finally, in the discussion chapter some proposals for the future amendment of monument definition in the Act of Conservation and the Care of Monuments have been provided.

Scope of Nursing Care in Polish Intensive Care Units

Directory of Open Access Journals (Sweden)

Mariusz Wysokiński

2013-01-01

Full Text Available Introduction. The TISS-28 scale, which may be used for nursing staff scheduling in ICU, does not reflect the complete scope of nursing resulting from varied cultural and organizational conditions of individual systems of health care. Aim. The objective of the study was an attempt to provide an answer to the question what scope of nursing care provided by Polish nurses in ICU does the TISS-28 scale reflect? Material and Methods. The methods of working time measurement were used in the study. For the needs of the study, 252 hours of continuous observation (day-long observation and 3.697 time-schedule measurements were carried out. Results. The total nursing time was 4125.79 min. (68.76 hours, that is, 60.15% of the total working time of Polish nurses during the period analyzed. Based on the median test, the difference was observed on the level of χ2=16945.8, P<0.001 between the nurses’ workload resulting from performance of activities qualified into the TISS-28 scale and load resulting from performance of interventions within the scopes of care not considered in this scale in Polish ICUs. Conclusions. The original version of the TISS-28 scale does not fully reflect the workload among Polish nurses employed in ICUs.

Identification and dissection of four major QTL affecting milk fat content in the German Holstein-Friesian population.

Directory of Open Access Journals (Sweden)

Xiaolong Wang

Full Text Available Milk composition traits exhibit a complex genetic architecture with a small number of major quantitative trait loci (QTL explaining a large fraction of the genetic variation and numerous QTL with minor effects. In order to identify QTL for milk fat percentage (FP in the German Holstein-Friesian (HF population, a genome-wide association study (GWAS was performed. The study population consisted of 2327 progeny-tested bulls. Genotypes were available for 44,280 SNPs. Phenotypes in the form of estimated breeding values (EBVs for FP were used as highly heritable traits. A variance components-based approach was used to account for population stratification. The GWAS identified four major QTL regions explaining 46.18% of the FP EBV variance. Besides two previously known FP QTL on BTA14 (P = 8.91×10-(198 and BTA20 (P = 7.03×10(-12 within DGAT1 and GHR, respectively, we uncovered two additional QTL regions on BTA5 (P = 2.00×10(-13 and BTA27 (P = 9.83×10(-5 encompassing EPS8 and GPAT4, respectively. EPS8 and GPAT4 are involved in lipid metabolism in mammals. Re-sequencing of EPS8 and GPAT4 revealed 50 polymorphisms. Genotypes for five of them were inferred for the entire study population. Two polymorphisms affecting potential transcription factor binding sites of EPS8 (P = 1.40×10(-12 and GPAT4 (P = 5.18×10(-5, respectively, were highly significantly associated with the FP EBV. Our results provide evidence that alteration of regulatory sites is an important aspect of genetic variation of complex traits in cattle.

Morphological, Phenological And Agronomical Characterisation Of Variability Among Common Bean (Phaseolus Vulgaris L. Local Populations From The National Centre For Plant Genetic Resources: Polish Genebank

Directory of Open Access Journals (Sweden)

Boros Lech

2014-12-01

Full Text Available The main purpose of this work was to analyse the morphological, phenological and agronomical variability among common bean local populations from The National Centre for Plant Genetic Resources, Polish Genebank, in order to know the relation among them, and to identify potentially useful accessions for future production and breeding. A considerable genotypic variation for number of seeds per plant, number of pods per plant and weight of seeds per plant were found. Studied bean accessions differed significantly in terms of thousand seeds weight (TSW as well as severity of bacterial halo blight and anthracnose, the major bean diseases. The lowest genotypic diversity was found for the percentage of protein in the seeds, the length of the vegetation period and lodging. The cluster analysis allowed identification of five groups of bean accessions. Genotypes from the first cluster (POLPOD 98-77, KOS 002 and Raba cv. and from the second cluster (WUKR 06-573a, KRA 4, WUKR 06-0534 together with Prosna cv. are of the highest usefulness for breeding purposes. There was no grouping of local populations depending on region of origin.

Polish Qualitative Sociology. Insight into the future of postdisciplinary research

OpenAIRE

Konecki, Krzysztof

2014-01-01

The paper desctibes the definitions of following concepts: multidisiplinarity, interdisciplinarity, transdysciplinarity, postdisciplinarity. MOreover it discuss the meanings of a concept of discipline. It describes the place of the Polish qualitative sociology in the context of postdisciplinary research. The main question of paper is: Does the POlish Qualitative Sociology has entered the postdisciplinary phase of research? DGS, UL Krzysztof Konecki

Surface roughness of microparticulated and nanoparticulated composites after finishing and polishing procedures

Directory of Open Access Journals (Sweden)

Rosemary Arai Sadami Shinkai

Full Text Available Objective: To evaluated the surface roughness of one microparticulate resin composite Durafill (Heraeus Kulzer Weihrheim, Germany andfour nanoparticulate resins 4 Seasons (Ivoclar Vivadent, Schaan, Liechtenstein Esthet x (Dentsply, Milford, DE, USA, Point 4 and Supreme (3M-ESPE, Dental Products,St. Paul, MN, USA. Methods: After finishing with a diamond bur point (F, and polishing with silicone points of gray, green and pink color Politipit (Ivoclar Vivadent,Schaan, Liechtenstein, four stages of completion were performed, simulating one of finishing and three of polishing a resin restoration. Ten samples of each composite resin were measured for surface roughness with surface profilometer (Mitutoyo Corporation, Tokyo, Japan after each of finishing and polishing sequence.Results: The results showed that nanoparticulate and microparticulate resins presented a significant difference in the surface roughness values, in all finishing and polishing steps. Conclusion: Of the the nanoparticulate resins 4 Seasons (Ivoclar Vivadent, Schaan, Liechtenstein, Point 4 (Kerr CO, Orange, CA, USA, and also microparticulate Durafill (Heraeus Kulzer Weihrheim, Germany presented significantly lower surface roughness values after completing all the finishing and polishing stages.

Precision machining and polishing of scintillating crystals for large calorimeters and hodoscopes

International Nuclear Information System (INIS)

Wuest, C.R.; Fuchs, B.A.; Holdener, F.R.; Heck, J.L. Jr.

1994-04-01

New machining and polishing techniques have been developed for large scintillating crystal arrays such as the Barium Fluoride Electromagnetic Calorimeter for the GEM Detector at SSCL, the Crystal Clear Collaboration's cerium fluoride or lead tungstenate calorimeter at the proposed LHC and CERN, the PHENIX Detector at RHIC (barium fluoride), and the cesium iodide Calorimeter for the BaBar Detector at PEP-2 B Factory at SLAC. The machining and polishing methods to be presented in this paper provide crystalline surfaces without sub-surface damage or deformation as verified by Rutherford Back-scattering (RBS) analysis. Surface roughness of about 10--20 angstroms and sub-micron mechanical tolerances have been demonstrated on large barium fluoride crystal samples. Mass production techniques have also been developed for machining the proper angled surfaces and polishing up to five 50 cm long crystals at one time. These techniques utilize kinematic mount technology developed at LLNL to allow precision machining and polishing of complex surfaces. They will present this technology along with detailed surface studies of barium fluoride and cerium fluoride crystals polished with this technique

German EstSmoke: estimating adult smoking-related costs and consequences of smoking cessation for Germany.

Science.gov (United States)

Sonntag, Diana; Gilbody, Simon; Winkler, Volker; Ali, Shehzad

2018-01-01

We compared predicted life-time health-care costs for current, never and ex-smokers in Germany under the current set of tobacco control polices. We compared these economic consequences of the current situation with an alternative in which Germany were to implement more comprehensive tobacco control policies consistent with the World Health Organization (WHO) Framework Convention for Tobacco Control (FCTC) guidelines. German EstSmoke, an adapted version of the UK EstSmoke simulation model, applies the Markov modelling approach. Transition probabilities for (re-)currence of smoking-related diseases were calculated from large German disease-specific registries and the German Health Update (GEDA 2010). Estimations of both health-care costs and effect sizes of smoking cessation policies were taken from recent German studies and discounted at 3.5%/year. Germany. German population of prevalent current, never and ex-smokers in 2009. Life-time cost and outcomes in current, never and ex-smokers. If tobacco control policies are not strengthened, the German smoking population will incur €41.56 billion life-time excess costs compared with never smokers. Implementing tobacco control policies consistent with WHO FCTC guidelines would reduce the difference of life-time costs between current smokers and ex-smokers by at least €1.7 billion. Modelling suggests that the life-time healthcare costs of people in Germany who smoke are substantially greater than those of people who have never smoked. However, more comprehensive tobacco control policies could reduce health-care expenditures for current smokers by at least 4%. © 2017 Society for the Study of Addiction.

Continuity of Y chromosome haplotypes in the population of Southern Poland before and after the Second World War.

Science.gov (United States)

Woźniak, Marcin; Grzybowski, Tomasz; Starzyński, Jarosław; Marciniak, Tomasz

2007-06-01

The Polish population is reported to be very homogenous as far as Y chromosome polymorphism is concerned. One of the hypotheses that explains this phenomenon is based on the assumption that massive migrations that took place in Poland after the Second World War might have evoked such an effect. Thus, knowledge of the pre-war frequencies of Y chromosome haplotypes in different parts of the country would be a useful tool in testing such a hypothesis. We have collected 226 DNA samples, together with family history data, from males living in the rural area of Małopolska, Polish Southern border region. Based on donors' family histories we were able to reconstruct an 'ancestral' subpopulation of 108 males whose ancestors had inhabited the area before both World Wars. We have analyzed 12 Y-STR loci: DYS19, DYS385, DYS389I&II, DYS390, DYS391, DYS392, DYS393, DYS437, DYS438 and DYS439 in all the collected samples. Comparisons of our contemporary and 'ancestral' population samples with other Polish and Central European populations showed that the population of Southern Małopolska is very closely related to other Polish and Slavic populations. The above-mentioned observations suggest that the population of Southern Poland could have been highly homogenous even before the Second World War.

Comparison of the most popular Czech and German lexemes in the global Internet search engine Google

Directory of Open Access Journals (Sweden)

Dana Gálová

2017-11-01

Full Text Available Most widely used search engine Google represents the most current language databank in the world. It publishes annually the statistics of the most popular words that indicate interest preferences of a particular population in a given year. The aim of this paper is a comparative analysis of the most popular lexemes in Czech and German versions of search engine Google in 2015. Lexeme segmentation into different thematic fields enabled the identification of correspondences and differences and thus the comparison of interest preferences of Czech and German population. The paper also offers mutual interpretation of differences and reflection on the causes of different extents of civic engagement in both populations.

DEMorphy, German Language Morphological Analyzer

OpenAIRE

Altinok, Duygu

2018-01-01

DEMorphy is a morphological analyzer for German. It is built onto large, compactified lexicons from German Morphological Dictionary. A guesser based on German declension suffixed is also provided. For German, we provided a state-of-art morphological analyzer. DEMorphy is implemented in Python with ease of usability and accompanying documentation. The package is suitable for both academic and commercial purposes wit a permissive licence.

Acoustic emission-based in-process monitoring of surface generation in robot-assisted polishing

DEFF Research Database (Denmark)

Pilny, Lukas; Bissacco, Giuliano; De Chiffre, Leonardo

2016-01-01

The applicability of acoustic emission (AE) measurements for in-process monitoring of surface generation in the robot-assisted polishing (RAP) was investigated. Surface roughness measurements require interruption of the process, proper surface cleaning and measurements that sometimes necessitate...... automatic detection of optimal process endpoint allow intelligent process control, creating fundamental elements in development of robust fully automated RAP process for its widespread industrial application....... removal of the part from the machine tool. In this study, stabilisation of surface roughness during polishing rotational symmetric surfaces by the RAP process was monitored by AE measurements. An AE sensor was placed on a polishing arm in direct contact with a bonded abrasive polishing tool...

Effect of one-step polishing system on the color stability of nanocomposites.

Science.gov (United States)

Alawjali, S S; Lui, J L

2013-08-01

This study was to compare the effect of three different one-step polishing systems on the color stability of three different types of nanocomposites after immersion in coffee for one day and seven days and determine which nanocomposite material has the best color stability following polishing with each of the one-step polishing system. The nanocomposites tested were Tetric EvoCeram, Grandio and Herculite Précis. A total of 120 discs (40/nanocomposite, 8mm×2mm) were fabricated. Ten specimens for each nanocomposite cured under Mylar strips served as the control. The other specimens were polished with OptraPol, OneGloss and Occlubrush immersed in coffee (Nescafé) up to seven days. Color measurements were made with a spectrophotometer at baseline and after one and seven days. Two way repeated measure ANOVA, two way ANOVA and Bonferroni tests were used for statistical analyses (P<0.05). The immersion time was a significant factor in the discoloration of the nanocomposites. The effect of three one-step polishing systems on the color stability was also significant. The color change values of the materials cured against Mylar strips were the greatest. The lowest mean color change values were from the Occlubrush polished groups. The effect of the three different types of nanocomposite on the color change was significant. The highest color change values were with Tetric EvoCeram groups. The lowest color change values were with Herculite Précis groups. The color change of nanocomposite resins is affected by the type of composite, polishing procedure and the period of immersion in the staining agent. Copyright © 2012 Elsevier Ltd. All rights reserved.

Recovery of rare earths from used polishes by chemical vapor transport process

International Nuclear Information System (INIS)

Ozaki, T.; Machida, K.; Adachi, G.

1998-01-01

Full text: Rare earth oxide polishes are widely used in the glass industry because of its mechanical and chemical polishing action. The Japanese glass industry use 2000 tons per year of the polishes, and a large portion of them are thrown away after their polishing lifetime. A dry recovery processes for rare earths from the used polishes have been investigated by using a chemical vapor transport method via the formation of vapor complexes RAl n Cl 3+3n (R = rare earths). A flow type reactor with various temperature gradients was employed for the process. The used polishes were mixed with active carbon, and chlorinated with N 2 + Cl 2 mixture at 1273 K. Aluminium oxide were also chlorinated at lower temperature and the resulting AlCl 3 were introduced to the reactor. The rare earth chlorides and AlCl 3 were converted to the vapor complexes. These were driven along the temperature gradient, decomposed according to the reverse reaction, and regenerated RCl 3 . About 90 % of the used polish were chlorinated after 2 hours. Rare earth chlorides, AlCl 3 , and FeCl 3 were fully transported after 82 hours. The rare earth chlorides were mainly condensed over the temperature range 1263-903 K. On the other hand, AlCl 3 and FeCl 3 were deposited at the temperature range below 413 K. CaCl 2 and SrCl 2 were hardly transported and remained in the residue. When the temperature gradient with the smaller slope was used, mutual separation efficiencies among the rare earths was improved. The highest CeCl 3 purity of 80% was obtained in the process

Health Information in German (Deutsch)

Science.gov (United States)

... Tools You Are Here: Home → Multiple Languages → German (Deutsch) URL of this page: https://medlineplus.gov/languages/german.html Health Information in German (Deutsch) To use the sharing features on this page, ...

The epidemiologic study: the serum levels of TSH, T4, T3 and autoantibodies in the Polish population

International Nuclear Information System (INIS)

Gardas, A.

1991-01-01

In 1986-1990 epidemiologic studies on the thyroid diseased frequency in the Polish population were undertaken. During this studies the serum levels of TSH, T 4 , T 3 and autoantibodies were estimated in more then 30 thousand people. TSH was estimated in 30749, T 4 in 30928, T 3 in 30621 and autoantibodies in 31265 randomly chosen people in 5 districts. We have arbitrarily established the normal range for TSH to be between 0.4-3.8 μIU/ml, for T 4 4.4-12.5 μg and for T 3 0.9-1.95 ng/ml. The tested group has been divide in 4 subgroup: girls and boys from 1 to 15 years of age of the Chernobyl accident, men and women from 15 to 50 years of age at the date of the accident. TSH values in the normal range were found in 85 to 92% of the tested population, depending on the subgroup. T 4 vales in the normal range were found in 85 to 92% of the tested groups. T 3 vales in the normal range were found in 86 to 93% of the tested groups. The absence on any kind of autoantibodies was established in 89.7% of the tested population. TSH values was above the normal range (above 3.8 μIU/ml) in 3.4% of boys, 4.3% girls, 3.2% men and 3.8% women. TSH vales below the normal range (less the 0.4 μIU/ml) were found in 4.3% boys, 5% girls, 10% men and 11.2% women. T 4 values above the normal range (higher then 12.5 μg%) were found in 12.9% boys, 12.6% girls, 4.6% men and 5.9% women. T 4 vales below the normal range (less then 4.4 μg%) were detected in 0.9% boys, 1.4% girls, 2.4% men and 2.0% women. T 3 values higher then 1.95 ng/ml were found in 10.8% of boys, 11.5% girls, 2.6% men and 3.5% women. The percentage of values above of below the arbitrarily chosen normal range depends on the age and sex group. (author). 5 refs, 4 tabs

Changes in depression stigma after the Germanwings crash - Findings from German population surveys.

Science.gov (United States)

von dem Knesebeck, Olaf; Mnich, Eva; Angermeyer, Matthias C; Kofahl, Christopher; Makowski, Anna

2015-11-01

Media coverage of the Germanwings plane crash intensely focused on the co-pilot's mental illness and was criticized for potentially increasing depression stigma. We explored whether stigma beliefs towards persons with depression changed in April 2015 (about one month after the crash) compared to 2014. Telephone surveys among the adult population were conducted in Munich, Germany (N=650 in 2014 and N=601 in 2015). In both surveys, four components of stigma were assessed: (1) characteristics ascribed to persons with a depression, (2) belief in a continuum of symptoms from mental health to mental illness, (3) emotional reactions to people afflicted by depression (fear, anger, and pro-social reactions), and (4) desire for social distance. Some stigmatizing attitudes have increased after the crash. More specifically, we found more pronounced changes in the attributes ascribed (stereotypes) and in the perceived separation from persons afflicted (continuum beliefs) than in the emotional reactions and the desire for social distance. However, overall increase in depression stigma was smaller than expected as changes were not statistically significant in the majority of the analyzed items. Due to the study design no causal interpretation of results is possible. Moreover, evidence presented is confined to a regional German sample. A single devastating event and related media coverage seem to have a limited impact on public stigmatizing attitudes. Copyright © 2015 Elsevier B.V. All rights reserved.

Evaluation of one-step micro polishers for residual resin removal after debonding on fluorosed teeth

Directory of Open Access Journals (Sweden)

Padmalatha Challa

2014-01-01

Full Text Available Aim and objectives: To evaluate the effectiveness of one step micro polishers for residual resin removal on fluorosed teeth using scanning electron microscope (SEM. Methods and Material: 55 teeth with mild to moderate fluorosis were selected with five teeth as control. Metal brackets were bonded onto 50 teeth which were divided into 5 groups. The finishing and polishing methods which were tested include tungsten carbide burs (TCB, multistep finishing system (Sof-Lex, one step polishers (PoGo and combination of TCB with multistep and one step polishing systems. After resin removal, all the samples were examined under SEM for assessment of the enamel surface. Results: The enamel surface was closest to untouched enamel in samples finished with the PoGo one step polishers followed by Sof-Lex multistep finishing system. However, they took the longest time to finish. TCB required the shortest time for residual resin removal. Conclusions: All polishing systems produce a certain degree of damage to the enamel surface with the smoothest surface being produced by one step polishers on fluorosed teeth.

Computer-aided diagnostic system for detection of Hashimoto thyroiditis on ultrasound images from a Polish population.

Science.gov (United States)

Acharya, U Rajendra; Sree, S Vinitha; Krishnan, M Muthu Rama; Molinari, Filippo; Zieleźnik, Witold; Bardales, Ricardo H; Witkowska, Agnieszka; Suri, Jasjit S

2014-02-01

Computer-aided diagnostic (CAD) techniques aid physicians in better diagnosis of diseases by extracting objective and accurate diagnostic information from medical data. Hashimoto thyroiditis is the most common type of inflammation of the thyroid gland. The inflammation changes the structure of the thyroid tissue, and these changes are reflected as echogenic changes on ultrasound images. In this work, we propose a novel CAD system (a class of systems called ThyroScan) that extracts textural features from a thyroid sonogram and uses them to aid in the detection of Hashimoto thyroiditis. In this paradigm, we extracted grayscale features based on stationary wavelet transform from 232 normal and 294 Hashimoto thyroiditis-affected thyroid ultrasound images obtained from a Polish population. Significant features were selected using a Student t test. The resulting feature vectors were used to build and evaluate the following 4 classifiers using a 10-fold stratified cross-validation technique: support vector machine, decision tree, fuzzy classifier, and K-nearest neighbor. Using 7 significant features that characterized the textural changes in the images, the fuzzy classifier had the highest classification accuracy of 84.6%, sensitivity of 82.8%, specificity of 87.0%, and a positive predictive value of 88.9%. The proposed ThyroScan CAD system uses novel features to noninvasively detect the presence of Hashimoto thyroiditis on ultrasound images. Compared to manual interpretations of ultrasound images, the CAD system offers a more objective interpretation of the nature of the thyroid. The preliminary results presented in this work indicate the possibility of using such a CAD system in a clinical setting after evaluating it with larger databases in multicenter clinical trials.

DDR-Landeskundliches im Deutschunterricht (East German Culture in the German Lesson).

Science.gov (United States)

Wazel, Gerhard

1988-01-01

Demonstrates with concrete examples from the texts of a German class for advanced learners how aspects of East German culture can be realized in vocabulary, in lectures, and in the development of listening comprehension and speaking skills. Texts are appended. (DJD)

Chemical-mechanical polishing of metal and dielectric films for microelectronic applications

Science.gov (United States)

Hegde, Sharath

The demand for smaller, faster devices has led the integrated circuit (IC) industry to continually increase the device density on a chip while simultaneously reducing feature dimensions. Copper interconnects and multilevel metallization (MLM) schemes were introduced to meet some of these challenges. With the employment of MLM in the ultra-large-scale-integrated (ULSI) circuit fabrication technology, repeated planarization of different surface layers with tolerance of a few nanometers is required. Presently, chemical-mechanical planarization (CMP) is the only technique that can meet this requirement. Damascene and shallow trench isolation processes are currently used in conjunction with CMP in the fabrication of multilevel copper interconnects and isolation of devices, respectively, for advanced logic and memory devices. These processes, at some stage, require simultaneous polishing of two different materials using a single slurry that offers high polish rates, high polish selectivity to one material over the other and good post-polish surface finish. Slurries containing one kind of abrasive particles do not meet most of these demands due mainly to the unique physical and chemical properties of each abrasive. However, if a composite particle is formed that takes the advantages of different abrasives while mitigating their disadvantages, the CMP performance of resulting abrasives would be compelling. It is demonstrated that electrostatic interactions between ceria and silica particles at pH 4 can be used to produce composite particles with enhanced functionality. Zeta potential measurement and TEM images used for particle characterization show the presence of such composite particles with smaller shell particles attached onto larger core particles. Slurries containing ceria (core)/silica (shell) and silica (core)/ceria (shell) composite particles when used to polish metal and dielectric films, respectively, yield both enhanced metal and dielectric film removal rates

Mirror surface metrology and polishing for AXAF/TMA

International Nuclear Information System (INIS)

Slomba, A.; Babish, R.; Glenn, P.

1985-01-01

The achievement of the derived goals for mirror surface quality on the Advanced X-ray Astrophysics Facility (AXAF), Technology Mirror Assembly (TMA) required a combination of state-of-the-art metrology and polishing techniques. In this paper, the authors summarize the derived goals and cover the main facets of the various metrology instruments employed, as well as the philosophy and technique used in the polishing work. In addition, they show how progress was measured against the goals, using the detailed error budget for surface errors and a mathematical model for performance prediction. The metrology instruments represented a considerable advance on the state-of-the-art and fully satisfied the error budget goals for the various surface errors. They were capable of measuring the surface errors over a large range of spatial periods, from low-frequency figure errors to microroughness. The polishing was accomplished with a computer-controlled process, guided by the combined data from various metrology instruments. This process was also tailored to reduce the surface errors over the full range of spatial periods

Preparation of cerium oxide for lens polishing powder

International Nuclear Information System (INIS)

Injarean, Uthaiwan; Rodthongkom, Chouvana; Pichestapong, Pipat; Changkrurng, Kalaya

2003-10-01

Cerium is an element of rare earth group which is called lanthanide series. It is found in the ores like monazite and xenotime which are the tailings of tin mines in the south of Thailand. Cerium is used mostly as lens polishing powder besides the applications in other industries. In this study, cerium extracted from monazite ore breakdown by alkaline process was used for the preparation of lens polishing powder. Cerium hydroxide cake from the process was dissolved by hydrochloric acid and precipitated with oxalic acid. The oxalate precipitate then was calcined to oxide powder and its particle size was measured. Precipitation conditions being studied are concentration of feed cerium chloride solution, concentration of oxalic acid used for the precipitation, concentration of sulfuric acid used as precipitation control reagent and the precipitation temperature. It was found that the appropriate precipitation conditions yielded the fine oxide powder with particle size about 12μm. The oxide powder can be ground to the size of 1-3 μm which is suitable for making lens polishing powder

[The Quality of the Family Physician-Patient Relationship. Patient-Related Predictors in a Sample Representative for the German Population].

Science.gov (United States)

Dinkel, Andreas; Schneider, Antonius; Schmutzer, Gabriele; Brähler, Elmar; Henningsen, Peter; Häuser, Winfried

2016-03-01

Patient-centeredness and a strong working alliance are core elements of family medicine. Surveys in Germany showed that most people are satisfied with the quality of the family physician-patient relationship. However, factors that are responsible for the quality of the family physician-patient relationship remain unclear. This study aimed at identifying patient-related predictors of the quality of this relationship. Participants of a cross-sectional survey representative for the general German population were assessed using standardized questionnaires. The perceived quality of the family physician-patient relationship was measured with the German version of the Patient-Doctor Relationship Questionnaire (PDRQ-9). Associations of demographic and clinical variables (comorbidity, somatic symptom burden, psychological distress) with the quality of the family physician-patient relationship were assessed by applying hierarchical linear regression. 2278 participants (91,9%) reported having a family physician. The mean total score of the PDRQ-9 was high (M=4,12, SD=0,70). The final regression model showed that higher age, being female, and most notably less somatic and less depressive symptoms predicted a higher quality of the family physician-patient relationship. Comorbidity lost significance when somatic symptom burden was added to the regression model. The final model explained 11% of the variance, indicating a small effect. Experiencing somatic and depressive symptoms emerged as most relevant patient-related predictors of the quality of the family physician-patient relationship. © Georg Thieme Verlag KG Stuttgart · New York.

Infestation of Polish Agricultural Soils by Plasmodiophora Brassicae Along The Polish-Ukrainian Border

Directory of Open Access Journals (Sweden)

Jędryczka Małgorzata

2014-07-01

Full Text Available There has been a rapid, worldwide increase in oilseed rape production that has resulted in enormous intensification of oilseed rape cultivation, leading to tight rotations. This in turn, has caused an accumulation of pests as well as foliar and soil-borne diseases. Recently, clubroot has become one of the biggest concerns of oilseed rape growers. Clubroot is caused by the soil-borne protist Plasmodiophora brassicae Woronin. The pathogen may be present in groundwater, lakes, and irrigation water used in sprinkling systems. It can be easily transmitted from one field to another not only by water, but also by soil particles and dust transmitted by wind and on machinery. The aim of our overall study was to check for P. brassicae infestation of Polish agricultural soils. This paper presents the 2012 results of a study performed along the Polish-Ukrainian border in two provinces: Lublin (Lubelskie Voivodeship and the Carpathian Foothills (Podkarpackie Voivodeship, in south-east Poland. Monitoring was done in 11 counties, including nine rural and two municipal ones. In total, 40 samples were collected, out of which 36 were collected from fields located in rural areas and four from municipal areas, with two per municipal region. Each sample was collected at 8-10 sites per field, using a soil auger. The biotest to detect the presence of P. brassicae was done under greenhouse conditions using seedlings of the susceptible Brassicas: B. rapa ssp. pekinensis and the Polish variety of oilseed rape B. napus cv. Monolit. Susceptible plants grown in heavily infested soils produced galls on their roots. A county was regarded as free from the pathogen, if none of the bait plants became infected. The pathogen was found in three out of 40 fields monitored (7.5% in the Carpathian Foothill region. The fields were located in two rural counties. The pathogen was not found in Lublin province, and was also not detected in any of the municipal counties. The detection with

Long Distance Solidarity: Polish Public Opinion and the Boer War 1899–1902

Directory of Open Access Journals (Sweden)

Szlanta Piotr

2017-06-01

Full Text Available The bloody conflict which was taking place in South Africa in the years 1899-1902 was followed with a great interest by Polish public opinion. Its greatest part strongly sympathized with the Boer republics. Their burgers were idealized and presented by the Polish press as brave fighters for independence, who dared to stand up against the world empire to defend their rights while Great Britain was attributed full responsibility for the outbreak of the war. For many Poles the Boers personified the general idea of freedom fighters and symbolized all suppressed nations. Their sad fate seemed to be quite similar to the Polish one and this similarity was the main source of sympathy toward defenders of the Transvaal and Free Orange State. Voices of few Polish intellectuals, who called for a more objective and not so emotional view on the war, could not change the pro-Boers stance of the greatest part of Polish public opinion.

Efficacy of polishing kits on the surface roughness and color stability ...

African Journals Online (AJOL)

Objective: Different polishing kits may have different effects on the composite resin surfaces. The aim of this study was to evaluate the surface roughness and color stability of four different composites which was applied different polishing technique. Materials and Methods: Thirty specimens were made for each composite ...

Evaluating the Impact of an Accountable Care Organization on Population Health: The Quasi-Experimental Design of the German Gesundes Kinzigtal.

Science.gov (United States)

Pimperl, Alexander; Schulte, Timo; Mühlbacher, Axel; Rosenmöller, Magdalena; Busse, Reinhard; Groene, Oliver; Rodriguez, Hector P; Hildebrandt, Helmut

2017-06-01

A central goal of accountable care organizations (ACOs) is to improve the health of their accountable population. No evidence currently links ACO development to improved population health. A major challenge to establishing the evidence base for the impact of ACOs on population health is the absence of a theoretically grounded, robust, operationally feasible, and meaningful research design. The authors present an evaluation study design, provide an empirical example, and discuss considerations for generating the evidence base for ACO implementation. A quasi-experimental study design using propensity score matching in combination with small-scale exact matching is implemented. Outcome indicators based on claims data were constructed and analyzed. Population health is measured by using a range of mortality indicators: mortality ratio, age at time of death, years of potential life lost/gained, and survival time. The application is assessed using longitudinal data from Gesundes Kinzigtal, one of the leading population-based ACOs in Germany. The proposed matching approach resulted in a balanced control of observable differences between the intervention (ACO) and control groups. The mortality indicators used indicate positive results. For example, 635.6 fewer years of potential life lost (2005.8 vs. 2641.4; t-test: sig. P < 0.05*) in the ACO intervention group (n = 5411) attributable to the ACO, also after controlling for a potential (indirect) immortal time bias by excluding the first half year after enrollment from the outcome measurement. This empirical example of the impact of a German ACO on population health can be extended to the evaluation of ACOs and other integrated delivery models of care.

Research status in ultra-precision machining of silicon carbide parts by oxidation-assisted polishing

Directory of Open Access Journals (Sweden)

Xinmin SHEN

2016-10-01

Full Text Available Oxidation-assisted polishing is an important machining method for obtaining SiC parts with high precision. Through plasma oxidation, thermal oxidation, and anodic oxidation, soft oxide can be obtained on the RS-SiC substrate. With the assistance of abrasive polishing to remove the oxide rapidly, the material removal rate can be increased and the surface quality can be improved. The research results indicate that the surface roughness root-mean-square (RMS and roughness-average (Ra can reach 0.626 nm and 0.480 nm by plasma oxidation-assisted polishing; in thermal oxidation-assisted polishing, the RMS and Ra can be 0.920 nm and 0.726 nm; in anodic oxidation, the calculated oxidation rate is 5.3 nm/s based on Deal-Grove model, and the RMS and Ra are 4.428 nm and 3.453 nm respectively in anodic oxidation-assisted polishing. The oxidation-assisted polishing can be propitious to improve the process level in machining RS-SiC, which would promote the application of SiC parts in optics and ceramics fields.

Summary of Synthetic Lap Polishing Experiments at LLNL, FY95

International Nuclear Information System (INIS)

Nichols, M A

2001-01-01

The purpose of this research was to support the optics finishing development work for the NIF, the National Ignition Facility. One of the major expenses for the construction of NIF is the cost of finishing of the large aperture optics. One way to significantly reduce the cost of the project is to develop processes to reduce the amount of time necessary to polish the more than 3,000 amplifier slabs. These slabs are rectangular with an aspect ratio of more than twenty to one and are made of a very temperature sensitive glass, Nd doped phosphate laser glass. As a result of this effort, we could potentially reduce the time necessary to polish each surface of an amplifier from 20-30 hours of run time to under an hour to achieve the same removal and still maintain a flatness of between one to three waves concave figure. We also feel confident that we can polish rectangular thermally sensitive glass flat by use of temperature control of the polishing platen, pad curvature, slurry concentration with temperature control, pad rotation, and pressure; although further, larger scale experiments are necessary to gain sufficient confidence that such a procedure could be successfully fielded

[German influences on Romanian medical terminology].

Science.gov (United States)

Răcilă, R G; Răileanu, Irena; Rusu, V

2008-01-01

The medical terminology plays a key part both in the study of medicine as well as in its practice. Moreover, understanding the medical terms is important not only for the doctor but also for the patients who want to learn more about their condition. For these reasons we believe that the study of medical terminology is one of great interest. The aim of our paper was to evaluate the German linguistic and medical influences on the evolution of the Romanian medical terminology. Since the Romanian-German cultural contacts date back to the 12th century we had reasons to believe that the number of German medical words in Romanian would be significant. To our surprise, the Romanian language has very few German words and even less medical terms of German origin. However, when we searched the list of diseases coined after famous medical personalities, we found out that 26 % of them bore the names of German doctors and scientists. Taken together this proves that the German medical school played an important role on the evolution of Romanian medicine despite the fact that the Romanian vocabulary was slightly influenced by the German language. We explain this fact on the structural differences between the Romanian and German languages, which make it hard for German loans to be integrated in the Romanian lexis. In conclusion we state that the German influence on the Romanian medical terminology is weak despite the important contribution of the German medical school to the development of medical education and healthcare in Romania. Key

New surface modification method of bio-titanium alloy by EB polishing

International Nuclear Information System (INIS)

Okada, Akira; Uno, Yoshiyuki; Iio, Atsuo; Fujiwara, Kunihiko; Doi, Kenji

2008-01-01

A new surface modification for bio-titanium alloy products by electron beam (EB) polishing is proposed. In this EB polishing method, high energy density EB can be irradiated without concentrating the beam. Therefore, large-area EB with a maximum diameter of 60 mm can be used for instantaneously melting or evaporating metal surface. Experimental results made it clear that surface characteristics, such as repellency, corrosion resistance and coefficient of friction could be improved simultaneously with the surface smoothing in a few minutes under a proper condition. Therefore, EB polishing method has a possibility of high efficient surface smoothing and surface modification process for bio-titanium alloy. (author)

Family Enterprises in Polish Consumers' Mindset in the Light of International Tendencies

Directory of Open Access Journals (Sweden)

Joanna Bednarz

2017-07-01

Full Text Available Aim/purpose - The main aim of the paper is to fill in the gap in the existing literature as well as to propose a set of specific family enterprises' (FE attributes concerning certain socioeconomic conditions in Poland. The objectives of the article are interrelated with two theses. H1 assumes that in current literature there is a little attention paid to the demand side of the market, particularly to the individual consumers (including young buyers and their attitudes toward FEs. H2 indicates that the perception of Polish FEs changes considerably reflecting the international trends. Design/methodology/approach - The authors studied a consolidated profound review of recent international and Polish publications on FEs. The expert interviews and in-depth individual interviews were conducted. Both empirical studies brought a preliminary insight into overall consumer perception of the FEs in Poland. Findings - For several years Polish buyers have been dynamically changing their mindset, breaking the stereotype of FEs' owners. Nowadays, tradition and quality are two attributes which are associated closely with Polish FEs. Customers indicate that FEs are trustworthy, responsible, solid and dependable. They also highlight the ethnocentric attitude toward these companies - Polishness. All these attributes are evidently appreciated. FEs are correlated with traditional industries and products, especially with groceries, cosmetics, clothes, shoes, jewelry, furniture, windows and doors. Research implications/limitations - The identity of FEs is not always communicated properly. Consumers often cannot ascertain a provenance of their offer as many FEs do not emphasize their family identity. Additionally, on the Polish market, consumers are occasionally misled considering the family ownership of a business. Originality/value/contribution - The studies indicate a set of attributes typical of Polish FEs underpinning their strong identity which should be

Polishers around the globe: an overview on the market of large astronomical mirrors

Science.gov (United States)

Döhring, Thorsten

2014-07-01

Astronomical mirrors are key elements in modern optical telescopes, their dimensions are usually large and their specifications are demanding. Only a limited number of skilled companies respectively institutions around the world are able to master the challenge to polish an individual astronomical mirror, especially in dimensions above one meter. This paper presents an overview on the corresponding market including a listing of polishers around the globe. Therefore valuable information is provided to the astronomical community: Polishers may use the information as a global competitor database, astronomers and project managers may get more transparency on potential suppliers, and suppliers of polishing equipment may learn about unknown potential customers in other parts of the world. An evaluation of the historical market demand on large monolithic astronomical mirrors is presented. It concluded that this is still a niche market with a typical mean rate of 1-2 mirrors per year. Polishing of such mirrors is an enabling technology with impact on the development of technical know-how, public relation, visibility and reputation of the supplier. Within a corresponding technical discussion different polishing technologies are described. In addition it is demonstrated that strategic aspects and political considerations are influencing the selection of the optical finisher.

Study on combined polishing process of aspherical aluminum mirrors

Science.gov (United States)

Deng, Jinqiu; Peng, Xiaoqiang; Hu, Hao; Ge, Kunpeng

2017-10-01

The aluminum mirrors are widely used as important optical components in some vital fields such as astronomical instruments or military installations due to the unique advantages of aluminum alloy. In order to simplify the structure of optical system and improve the performance at the same time, it's a tendency that the optics will be designed to aspherical or other freeform shapes. However, the traditional techniques are falling to have adequate abilities to deal with the increasing demands of aluminum optics. For example, the tool marks leaved on the surface from single point diamond turning (SPDT) has obvious adverse effects to optical system. The deterministic and sub-aperture polishing process has showed the potential to fabricate complex shapes over the few years. But it's still recognized as a problem to polish bare aluminum directly because of its soft surface and active chemical characteristics. Therefore, a combination of magnetorheological finishing (MRF) and small tool polishing (STP) is applied to obtain high performance aluminum optics in this paper. A paraboloid aluminum mirror was polished with this proposed method, and the results showed that the surface texture of the sample is restrained from rms 0.409λ (λ=632.8nm) to rms 0.025λ, and the surface roughness is improved from average Ra 6 7nm to Ra 3 4nm.

Heavy Metal Contamination of Popular Nail Polishes in Iran

Directory of Open Access Journals (Sweden)

Golnaz Karimi

2015-06-01

Full Text Available Background: Toxic and hazardous heavy metals like arsenic, lead, mercury, zinc, chromium and iron are found in a variety of personal care products, e.g. lipstick, whitening toothpaste, eyeliner and nail color. The nails absorb the pigments of nail polishes and vaporized or soluble metals can easily pass it. The goal of this survey was to assess whether the different colors of nail polishes comply with maximum concentrations of heavy metals in the EPA’s guidelines. Methods: 150 samples of different popular brands of nail polishes in 13 colors (yellow, beige, silver, pink, white, violet, brown, golden, green, black, colorless, red and blue were randomly purchased from beauty shops in Tehran City, Iran, in 2014. Microwave digestion EPA method 3051 was used by a microwave oven to determine the amount of 5 heavy metals; Nickel, Chromium, Lead, Arsenic and Cadmium. One-way ANOVA, Two-way ANOVA, hierarchical cluster, and principal component analyses were applied by Statistica 7.0 software. Results: The concentrations of chrome, lead, nickel and arsenic showed significant differences between the colors (p<0.05. In all studied samples, the level of cadmium was beyond the safe maximum permissible limit (MPS, but no significance difference in the cadmium content was identified. Conclusion: Due to the high concentrations of toxic metals in many brands of nail polishes, meticulous quality control is recommended for these beauty products.

Holocaust Education in Polish Public Schools: Between Remembrance and Civic Education

Science.gov (United States)

Milerski, Boguslaw

2010-01-01

This article analyzes the historical and political context of Holocaust education, and its implementation in Polish schools. Perceptions of the Holocaust continue to change, influenced by Poland's social and political situation. The Polish historical context is quite specific; it includes the long history of Poles and Jews as neighbors, with local…

Polish Standard of the Technical Safety of Transmission Gas Pipelines

International Nuclear Information System (INIS)

Tkacz, A.J.

2006-01-01

The document is presenting the idea of the CNGI Norm called The Polish Standard of the Technical Safety of Transmission Gas Pipelines and the way of using it by companies associated in the Chamber of the Natural Gas Industry in the business activity. It will be applied to improve the quality and reliability of gas transmission after full opening of Polish natural gas market. (author)

[Sample German LAPS.

Science.gov (United States)

Rosenthal, Bianca

Four learning activity packages (LAPS) for use in secondary school German programs contain instructional materials which enable students to improve their basic linguistic skills. The units include: (1) "Grusse," (2) "Ich Heisse...Namen," (3) "Tune into Your Career: Business Correspondence 'Auf Deutch'," and (4) "Understanding German Culture."…

Reusing Ceramic Tile Polishing Waste In Paving Block Manufacturing

OpenAIRE

Giordano Penteado; Carmenlucia Santos; de Carvalho; Eduardo Viviani; Cecche Lintz; Rosa Cristina

2016-01-01

Ceramic companies worldwide produce large amounts of polishing tile waste, which are piled up in the open air or disposed of in landfills. These wastes have such characteristics that make them potential substitutes for cement and sand in the manufacturing of concrete products. This paper investigates the use of ceramic tile polishing waste as a partial substitute for cement and sand in the manufacturer of concrete paving blocks. A concrete mix design was defined and then the sand was replaced...

IDENTITY AND NEGOTIATION OF BOUNDARIES AMONG YOUNG POLISH JEWS

OpenAIRE

Cukras-Stelągowska, Joanna

2015-01-01

In this chapter, I would like to look at the processes of building the cultural identity of the young generation of Polish Jews, primarily including the models of constructing modern identifications with the Polish society, the Jewish people and the State of Israel. I will present the results of my own studies, and of those conducted by a few other young researchers dealing with these issues. My main theoretical sources are within the interpretive paradigm. The research methodology was based ...

Accent, Intelligibility, and the Role of the Listener: Perceptions of English-Accented German by Native German Speakers

Science.gov (United States)

Hayes-Harb, Rachel; Watzinger-Tharp, Johanna

2012-01-01

We explore the relationship between accentedness and intelligibility, and investigate how listeners' beliefs about nonnative speech interact with their accentedness and intelligibility judgments. Native German speakers and native English learners of German produced German sentences, which were presented to 12 native German speakers in accentedness…

Working conditions and Work-Family Conflict in German hospital physicians: psychosocial and organisational predictors and consequences

Directory of Open Access Journals (Sweden)

Schwappach David

2008-10-01

Full Text Available Abstract Background Germany currently experiences a situation of major physician attrition. The incompatibility between work and family has been discussed as one of the major reasons for the increasing departure of German physicians for non-clinical occupations or abroad. This study investigates predictors for one particular direction of Work-Family Conflict – namely work interfering with family conflict (WIF – which are located within the psychosocial work environment or work organisation of hospital physicians. Furthermore, effects of WIF on the individual physicians' physical and mental health were examined. Analyses were performed with an emphasis on gender differences. Comparisons with the general German population were made. Methods Data were collected by questionnaires as part of a study on Psychosocial work hazards and strains of German hospital physicians during April–July 2005. Two hundred and ninety-six hospital physicians (response rate 38.9% participated in the survey. The Copenhagen Psychosocial Questionnaire (COPSOQ, work interfering with family conflict scale (WIF, and hospital-specific single items on work organisation were used to assess WIF, its predictors, and consequences. Results German hospital physicians reported elevated levels of WIF (mean = 74 compared to the general German population (mean = 45, p p Conclusion In our study, work interfering with family conflict (WIF as part of Work-Family Conflict (WFC was highly prevalent among German hospital physicians. Factors of work organisation as well as factors of interpersonal relations at work were identified as significant predictors for WIF. Some of these predictors are accessible to alteration by improving work organisation in hospitals.

Inter-rater reliability of the German version of the Nurses' Global Assessment of Suicide Risk scale.

Science.gov (United States)

Kozel, Bernd; Grieser, Manuela; Abderhalden, Christoph; Cutcliffe, John R

2016-10-01

In comparison to the general population, the suicide rates of psychiatric inpatient populations in Germany and Switzerland are very high. An important preventive contribution to the lowering of the suicide rates in mental health care is to ensure that the risk of suicide of psychiatric inpatients is assessed as accurately as possible. While risk-assessment instruments can serve an important function in determining such risk, very few have been translated to German. Therefore, in the present study, we reported on the German version of Nurses' Global Assessment of Suicide Risk (NGASR) scale. After translating the original instrument into German and pretesting the German version, we tested the inter-rater reliability of the instrument. Twelve video case studies were evaluated by 13 raters with the NGASR scale in a 'laboratory' trial. In each case, the observer's agreement was calculated for the single items, the overall scale, the risk levels, and the sum scores. The statistical data analysis was conducted with kappa and AC1 statistics for dichotomous (items, scale) scales. A high-to-very high observers' agreement (AC1: 0.62-1.00, kappa: 0.00-1.00) was determined for 16 items of the German version of the NGASR scale. We conclude that the German version of the NGASR scale is a reliable instrument for evaluating risk factors for suicide. A reliable application in the clinical practise appears to be enhanced by training in the use of the instrument and the right implementation instructions. © 2016 Australian College of Mental Health Nurses Inc.

Research on Grinding and Polishing Force Control of Compliant Flange

Directory of Open Access Journals (Sweden)

Li Chuang

2015-01-01

Full Text Available The automation of the grinding and polishing process is important to improve the production efficiency of the part surfaces. In this paper, a new compliant flange mounted on the end of the industrial robots for the robotic grinding and polishing force control is developed. With regard to the non-linear and time-varying problem of the contact force, the mathematical model of the new force control system was presented and the fuzzy PID control strategy was used to drive the proposed system. Especially, the air spring and electric proportional valve is studied to establish the model. The simulation results show that the selected control strategy has quick response and good robustness, which satisfies the real-time requirements of the grinding and polishing force control in processing.

Risk factors for nasal malignancies in German men: the South-German Nasal cancer study.

Science.gov (United States)

Greiser, Eberhard M; Greiser, Karin Halina; Ahrens, Wolfgang; Hagen, Rudolf; Lazszig, Roland; Maier, Heinz; Schick, Bernhard; Zenner, Hans Peter

2012-11-06

There are few studies of the effects of nasal snuff and environmental factors on the risk of nasal cancer. This study aimed to investigate the impact of using nasal snuff and of other risk factors on the risk of nasal cancer in German men. A population-based case-control study was conducted in the German Federal States of Bavaria and Baden-Württemberg. Tumor registries and ear, nose and throat departments provided access to patients born in 1926 or later. Telephone interviews were conducted with 427 cases (mean age 62.1 years) and 2.401 population-based controls (mean age 60.8 years). Ever-use of nasal snuff was associated with an odds ratio (OR) for nasal cancer of 1.45 (95% confidence interval [CI] 0.88-2.38) in the total study population, whereas OR in smokers was 2.01 (95% CI 1.00-4.02) and in never smokers was 1.10 (95% CI 0.43-2.80). The OR in ever-smokers vs. never-smokers was 1.60 (95% CI 1.24-2.07), with an OR of 1.06 (95% CI 1.05-1.07) per pack-year smoked, and the risk was significantly decreased after quitting smoking. Exposure to hardwood dust for at least 1 year resulted in an OR of 2.33 (95% CI 1.40-3.91) in the total population, which was further increased in never-smokers (OR 4.89, 95% CI 1.92-12.49) in analyses stratified by smoking status. The OR for nasal cancer after exposure to organic solvents for at least 1 year was 1.53 (1.17-2.01). Ever-use of nasal sprays/nasal lavage for at least 1 month rendered an OR of 1.59 (1.04-2.44). The OR after use of insecticides in homes was 1.48 (95% CI 1.04-2.11). Smoking and exposure to hardwood dust were confirmed as risk factors for nasal carcinoma. There is evidence that exposure to organic solvents, and in-house use of insecticides could represent novel risk factors. Exposure to asbestos and use of nasal snuff were risk factors in smokers only.

The interbelic Germans from the Banat Highland. Coal, steel, mines and forges

Science.gov (United States)

Rudolf, C.; Micliuc, D. M.; Nedeloni, M. D.; Birtarescu, E.; Varga, A.

2018-01-01

The difficulties of the reconstruction era, following World War I had been increased by the cessation of some activities in the industrial centres of the Banat Highland. For instance, the copper mines were closed in 1921, the Romanian state forbidding the extraction of this ore. Only in Ocna de Fier a special dispensation had been given. The copper mines from Moldova Nouă, Sasca Montană, Ciclova, Dognecea had also been shut down. This fact caused the acid reaction of some writers. We recall that one of the main ways for improving the material condition, embraced by the ethnic Germans, was working abroad. Many German workers of the Banat Highland had emigrated, taking up an offer of well-paid work during the crisis years: 1929-1933. The miners of the Banat Highland, especially those of German origin, travelled to the areas rich in iron ore and coal of France, namely Alsace and Loraine. Considering that German was spoken there by a significant percentage of the population, the integration into the new working environment did not represent a problem.

Cleansing orthodontic brackets with air-powder polishing: effects on frictional force and degree of debris.

Science.gov (United States)

Leite, Brisa Dos Santos; Fagundes, Nathalia Carolina Fernandes; Aragón, Mônica Lídia Castro; Dias, Carmen Gilda Barroso Tavares; Normando, David

2016-01-01

Debris buildup on the bracket-wire interface can influence friction. Cleansing brackets with air-powder polishing can affect this process. The aim of this study was to evaluate the frictional force and amount of debris remaining on orthodontic brackets subjected to prophylaxis with air-powder polishing. Frictional force and debris buildup on the surface of 28 premolar brackets were evaluated after orthodontic treatment. In one hemiarch, each bracket was subjected to air-powder polishing (n = 14) for five seconds, while the contralateral hemiarch (n = 14) served as control. Mechanical friction tests were performed and images of the polished bracket surfaces and control surfaces were examined. Wilcoxon test was applied for comparative analysis between hemiarches at p Brackets that had been cleaned with air-powder polishing showed lower friction (median = 1.27 N) when compared to the control surfaces (median = 4.52 N) (p orthodontic brackets with air-powder polishing significantly reduces debris buildup on the bracket surface while decreasing friction levels observed during sliding mechanics.

IS GNB3 C825T POLYMORPHISM ASSOCIATED WITH ELITE STATUS OF POLISH ATHLETES?

Directory of Open Access Journals (Sweden)

M. Sawczuk

2014-07-01

Full Text Available The GNB3 gene encodes the beta 3 subunit of heterotrimeric G-proteins that are key components of intracellular signal transduction between G protein-coupled receptors (GPCR and intracellular effectors and might be considered as a potential candidate gene for physical performance. Objectives: The aim of this study was to compare frequency distribution of the common C to T polymorphism at position 825 (C825T of the GNB3 gene between athletes and nonathletic controls of the Polish population as well as to compare the genotype distribution and allele frequency of C825T variants within a group of athletes, i.e. between athletes of sports of different metabolic demands and competitive levels. Methods: The study was performed in a group of 223 Polish athletes of the highest nationally competitive standard (123 endurance-oriented athletes and 100 strength/power athletes. Control samples were prepared from 354 unrelated, sedentary volunteers. Results: The χ2 test revealed no statistical differences between the endurance-oriented athletes and the control group or between sprint/strength athletes and the control group across the GNB3 825C/T genotypes. There were no male-female genotype or allele frequency differences in controls or in either strength/power or endurance-oriented athletes. No statistically significant differences in either allele frequencies or genotype distribution were noted between the top-elite, elite or sub-elite of endurance-oriented and strength/power athletes and the control group. Conclusions: No association between elite status of Polish athletes and the GNB3 C825T polymorphic site has been found.

Westernization of dietary patterns among young Japanese and Polish females -- a comparison study.

Science.gov (United States)

Morinaka, Tomoko; Wozniewicz, Malgorzata; Jeszka, Jan; Bajerska, Joanna; Nowaczyk, Paulina; Sone, Yoshiaki

2013-01-01

Nowadays, the process of the westernization of eating habits is perceived to be one of the main causes of epidemics of civilization diseases, such as metabolic syndrome. The aim of the study was to assess the westernization of eating habits among 100 Japanese (aged 18-23 years) and 111 Polish female students (aged 19-25 years) of nutrition science related faculties. Food-frequency questionnaires were used to assess a dietary pattern during the four seasons of a one-year investigation. Data obtained in each season was pooled. The frequency of consumption of different foods (servings/week) between the two countries was compared and characterization of the dietary patterns of both studied populations was analyzed by factor analysis. When food consumption between the two countries was compared, apart from total meat and meat products and high-energy drink intake, significant differences were observed in all foods and food groups. Three dietary patterns were identified in both groups. Among Japanese participants, the first pattern was 'traditional Japanese', the second 'sweets and beverages', and the third 'Western', explaining 9.0%, 8.5% and 6.4% of the total variance, respectively. Among Polish participants, the first pattern was 'prudent', the second 'Western', and the third 'sweets and alcoholic beverages', explaining 8.2%, 7.7%, 6.4% of the total variance, respectively. Although the 'Western' dietary pattern was found in both groups, there were some differences in the remaining dietary patterns between the two countries. In the Japanese participants, significant cultural influences on habitual food intake could still be observed, and the extent of diet westernization seems to be smaller compared to the Polish participants.

German Orientalism

OpenAIRE

Margaret Olin

2011-01-01

Review of: Suzanne L. Marchand, German Orientalism in the Age of Empire: Religion, Race and Scholarship, Cambridge and Washington, D.C.: Cambridge University Press, 2009. This analysis of Suzanne L. Marchand’s German Orientalism in the Age of Empire: Religion, Race and Scholarship reads her contribution in part against the background of Edward Said’s path breaking book Orientalism. Differences lie in her more expansive understanding of the term ‘Oriental’ to include the Far East and her conce...

Research on Laser Micro Polishing of SLS Technology Sintered Iron-Based Powder Surface

OpenAIRE

Gerda Vaitkūnaitė; Vladislav Markovič; Olegas Černašėjus

2015-01-01

The article analyzes laser micro polishing of 1.2083 steel samples produced applying selective laser sintering (SLS) method. The study has evaluated the distribution of the shape, size and temperature of the laser beam treated area in the surface layer of sintered and laser polished samples. Experimental tests have shown the impact of the technical parameters of laser micro polishing on the width and hardness of the impact zone of the treated sample. The microstructure analysis of laser treat...

Polish credit institutions within the European Union: a cross-country survey

Directory of Open Access Journals (Sweden)

Mariusz Dybał

2011-06-01

Full Text Available The paper presents an analysis of the Polish financial system, with regard to both the number of financial institutions and their assets over the last two decades. Data on the structure of household assets are also presented. According to the study, banks are the most important institutions in the Polish financial system. Analyzed in order to compare Polish credit institutions with all other members of the European Union were total assets of credit institutions, assets of the 25 largest banks in the European Union, as well as in Central and East Europe, share of the five largest credit institutions in total assets (CR5, asset share of credit institutions with majority foreign equity ownership, number of credit institutions, number of local units (branches, number of residents per credit institution local unit, number of employees of credit institutions, assets of credit institutions per employee and GDP per capita in PPS. The data demonstrate that over the past decade Polish credit institutions have largely strengthened their position within the European Union.

[Comparison of surface roughness of nanofilled and microhybrid composite resins after curing and polishing].

Science.gov (United States)

Jiang, Hong; Lv, Da; Liu, Kailei; Zhang, Weisheng; Yao, Yao; Liao, Chuhong

2014-05-01

To compare the surface roughness of nanofilled dental composite resin and microhybrid composite resins after curing and polishing. A nanofilled composite (Z350) and 4 microhybrid composites (P60, Z250, Spectrum, and AP-X) were fabricated from the lateral to the medial layers to prepare 8 mm×8 mm×5 mm cubical specimens. The 4 lateral surfaces of each specimens were polished with abrasive disks (Super-Snap). Profilometer was used to test the mean surface roughness (Ra) after polishing. P60 had the lowest Ra (0.125∓0.030 µm) followed by Z250 and Spectrum. The Ra of Z350 (0.205∓0.052 µm) was greater than that of the other 3 resins, and AP-X had the roughest surfaces. Under scanning electron microscope, the polished faces of P60 resin were characterized by minor, evenly distributed particles with fewer scratches; the polished faces of Z350 presented with scratches where defects of the filling material could be seen. The nanofilled composite Z350 has smooth surface after polishing by abrasive disks, but its smoothness remains inferior to that of other micro-hybrid composite resins.

Laser polishing for topography management of accelerator cavity surfaces

Energy Technology Data Exchange (ETDEWEB)

Zhao, Liang [College of William and Mary, Williamsburg, VA (United States); Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Klopf, J. Mike [College of William and Mary, Williamsburg, VA (United States); Reece, Charles E. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Kelley, Michael J. [College of William and Mary, Williamsburg, VA (United States); Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

2015-07-20

Improved energy efficiency and reduced cost are greatly desired for advanced particle accelerators. Progress toward both can be made by atomically-smoothing the interior surface of the niobium superconducting radiofrequency accelerator cavities at the machine's heart. Laser polishing offers a green alternative to the present aggressive chemical processes. We found parameters suitable for polishing niobium in all surface states expected for cavity production. As a result, careful measurement of the resulting surface chemistry revealed a modest thinning of the surface oxide layer, but no contamination.

Crystal chemistry of germanates: Characteristic structural features of Li,Ge-germanates

International Nuclear Information System (INIS)

Ilyushin, G.D.; Dem'yanets, L.N.

2000-01-01

Crystallochemical classification of eleven compounds from the Li-germanate family is suggested. Depending on the set of the primary building units (PBU) (M-octahedra of the composition [GeO 6 ] and T-tetrahedra of the composition [GeO 4 ]) and the type of their 'condensation', these germanates are divided into three crystallochemical groups: framework MT-structures (four phases), condensed MT-structures (two phases), and tetrahedral T-condensed structures (five phases). The structural characteristics of the framework Li,Ge-germanates are considered, i.e., their symmetry, crystallographically independent sets of the primary building units, framework architecture, and the types of chains and layers of the (Ge,O)-radicals

Comparing quality of nutritional care in Dutch and German nursing homes.

Science.gov (United States)

van Nie-Visser, Noémi C; Meijers, Judith M M; Schols, Jos M G A; Lohrmann, Christa; Bartholomeyczik, Sabine; Halfens, Ruud J G

2011-09-01

This study investigates possible differences in malnutrition prevalence rates in Dutch and German nursing homes. It seeks to provide insight into the screening, prevention and treatment of malnutrition and the indicators for nutritional care policy. For decades, malnutrition has been an important problem in health care settings worldwide. A considerable percentage of frail older people suffer from malnutrition. In European nursing homes, the reported prevalence rates range widely (2% to 85%). This is a multicentre, cross-sectional prevalence study of malnutrition in Dutch and German nursing homes using standardised methodology, with the participation of respectively 5848 and 4923 residents (65+ years). Patient characteristics differed significantly between the two countries. Dutch residents were more often male, younger, more care-dependent and significantly more at risk of malnutrition (31·7%). However, overall malnutrition prevalence rates did not differ significantly (Netherlands 26·8% and Germany 26·5%). All German residents were screened at admission, whereas only 73·1% of the Dutch residents were. As part of screening, nutritional screening tools were used in 38·0% of Dutch and 42·1% of the German residents. A dietician was consulted for 36·7% Dutch and 9·3% German malnourished residents. The proportion of malnourished receiving nutritional intervention was larger in Germany than in the Netherlands. Structural indicators for nutritional policy were fulfilled more often in the Netherlands care at institutional level whereas in Germany they were fulfilled more often at ward level. In this study, German residents had a somewhat better nutritional status than Dutch residents and more is done to enhance nutritional status in German nursing homes. The differences would be somewhat larger if both populations were more comparable. Comparing malnutrition prevalence rates, prevention and interventions in health care institutions and countries gives insight into

Surface roughness and morphology of dental nanocomposites polished by four different procedures evaluated by a multifractal approach

Energy Technology Data Exchange (ETDEWEB)

Ţălu, Ştefan, E-mail: stefan_ta@yahoo.com [Technical University of Cluj-Napoca, Faculty of Mechanical Engineering, Department of AET, Discipline of Descriptive Geometry and Engineering Graphics, 103-105 B-dul Muncii St., Cluj-Napoca 400641, Cluj (Romania); Stach, Sebastian, E-mail: sebastian.stach@us.edu.pl [University of Silesia, Faculty of Computer Science and Materials Science, Institute of Informatics, Department of Biomedical Computer Systems, Będzińska 39, 41-205 Sosnowiec (Poland); Lainović, Tijana, E-mail: tijana.lainovic@gmail.com [University of Novi Sad, Faculty of Medicine, School of Dentistry, Hajduk Veljkova 3, 21000 Novi Sad (Serbia); Vilotić, Marko, E-mail: markovil@uns.ac.rs [University of Novi Sad, Faculty of Technical Sciences, Department for Production Engineering, Trg Dositeja Obradovića 6, 21000 Novi Sad (Serbia); Blažić, Larisa, E-mail: larisa.blazic@gmail.com [University of Novi Sad, Faculty of Medicine, School of Dentistry, Clinic of Dentistry of Vojvodina, Department of Restorative Dentistry and Endodontics, Hajduk Veljkova 3, 21000 Novi Sad (Serbia); Alb, Sandu Florin, E-mail: albflorin@yahoo.com [“Iuliu Haţieganu” University of Medicine and Pharmacy, Faculty of Dentistry, Department of Periodontology, 8 Victor Babeş St., 400012 Cluj-Napoca (Romania); Kakaš, Damir, E-mail: kakasdam@uns.ac.rs [University of Novi Sad, Faculty of Technical Sciences, Department for Production Engineering, Trg Dositeja Obradovića 6, 21000 Novi Sad (Serbia)

2015-03-01

Graphical abstract: - Highlights: • Multifractals are good indicators of polished dental composites 3-D surface structure. • The nanofilled composite had superior 3-D surface properties than the nanohybrid one. • Composite polishing with diamond paste created improved 3-D multifractal structure. • Recommendation: polish the composite with diamond paste if using the one-step tool. • Multifractal analysis could become essential in designing new dental surfaces. - Abstract: The objective of this study was to determine the effect of different dental polishing methods on surface texture parameters of dental nanocomposites. The 3-D surface morphology was investigated by atomic force microscopy (AFM) and multifractal analysis. Two representative dental resin-based nanocomposites were investigated: a nanofilled and a nanohybrid composite. The samples were polished by two dental polishing protocols using multi-step and one-step system. Both protocols were then followed by diamond paste polishing. The 3-D surface roughness of samples was studied by AFM on square areas of topography on the 80 × 80 μm{sup 2} scanning area. The multifractal spectrum theory based on computational algorithms was applied for AFM data and multifractal spectra were calculated. The generalized dimension D{sub q} and the singularity spectrum f(α) provided quantitative values that characterize the local scale properties of dental nanocomposites polished by four different dental polishing protocols at nanometer scale. The results showed that the larger the spectrum width Δα (Δα = α{sub max} − α{sub min}) of the multifractal spectra f(α), the more non-uniform was the surface morphology. Also, the 3-D surface topography was described by statistical parameters, according to ISO 25178-2:2012. The 3-D surface of samples had a multifractal nature. Nanofilled composite had lower values of height parameters than nanohybrid composites, due to its composition. Multi-step polishing protocol

Surface roughness and morphology of dental nanocomposites polished by four different procedures evaluated by a multifractal approach

International Nuclear Information System (INIS)

Ţălu, Ştefan; Stach, Sebastian; Lainović, Tijana; Vilotić, Marko; Blažić, Larisa; Alb, Sandu Florin; Kakaš, Damir

2015-01-01

Graphical abstract: - Highlights: • Multifractals are good indicators of polished dental composites 3-D surface structure. • The nanofilled composite had superior 3-D surface properties than the nanohybrid one. • Composite polishing with diamond paste created improved 3-D multifractal structure. • Recommendation: polish the composite with diamond paste if using the one-step tool. • Multifractal analysis could become essential in designing new dental surfaces. - Abstract: The objective of this study was to determine the effect of different dental polishing methods on surface texture parameters of dental nanocomposites. The 3-D surface morphology was investigated by atomic force microscopy (AFM) and multifractal analysis. Two representative dental resin-based nanocomposites were investigated: a nanofilled and a nanohybrid composite. The samples were polished by two dental polishing protocols using multi-step and one-step system. Both protocols were then followed by diamond paste polishing. The 3-D surface roughness of samples was studied by AFM on square areas of topography on the 80 × 80 μm 2 scanning area. The multifractal spectrum theory based on computational algorithms was applied for AFM data and multifractal spectra were calculated. The generalized dimension D q and the singularity spectrum f(α) provided quantitative values that characterize the local scale properties of dental nanocomposites polished by four different dental polishing protocols at nanometer scale. The results showed that the larger the spectrum width Δα (Δα = α max − α min ) of the multifractal spectra f(α), the more non-uniform was the surface morphology. Also, the 3-D surface topography was described by statistical parameters, according to ISO 25178-2:2012. The 3-D surface of samples had a multifractal nature. Nanofilled composite had lower values of height parameters than nanohybrid composites, due to its composition. Multi-step polishing protocol created a better

Development of on the machine process monitoring and control strategy in Robot Assisted Polishing

DEFF Research Database (Denmark)

Pilny, Lukas; Bissacco, Giuliano

2015-01-01

Robot Assisted Polishing (RAP) can be used to polish rotational symmetric and free form components achieving surface roughness down to Sa 10 nm. With the aim to enable unmanned robust and cost efficient application of RAP, this paper presents the development of a monitoring and control strategy....... The multisensory approach was experimentally validated in polishing with bonded abrasives demonstrating its suitability for process control in RAP....

Persistence of nasal colonization with human pathogenic bacteria and associated antimicrobial resistance in the German general population

Directory of Open Access Journals (Sweden)

R. Köck

2016-01-01

Full Text Available The nares represent an important bacterial reservoir for endogenous infections. This study aimed to assess the prevalence of nasal colonization by different important pathogens, the associated antimicrobial susceptibility and risk factors. We performed a prospective cohort study among 1878 nonhospitalized volunteers recruited from the general population in Germany. Participants provided nasal swabs at three time points (each separated by 4–6 months. Staphylococcus aureus, Enterobacteriaceae and important nonfermenters were cultured and subjected to susceptibility testing. Factors potentially influencing bacterial colonization patterns were assessed. The overall prevalence of S. aureus, Enterobacteriaceae and nonfermenters was 41.0, 33.4 and 3.7%, respectively. Thirteen participants (0.7% were colonized with methicillin-resistant S. aureus. Enterobacteriaceae were mostly (>99% susceptible against ciprofloxacin and carbapenems (100%. Extended-spectrum β-lactamase–producing isolates were not detected among Klebsiella oxytoca, Klebsiella pneumoniae and Escherichia coli. Several lifestyle- and health-related factors (e.g. household size, travel, livestock density of the residential area or occupational livestock contact, atopic dermatitis, antidepressant or anti-infective drugs were associated with colonization by different microorganisms. This study unexpectedly demonstrated high nasal colonization rates with Enterobacteriaceae in the German general population, but rates of antibiotic resistance were low. Methicillin-resistant S. aureus carriage was rare but highly associated with occupational livestock contact.

The prevalence of burnout syndrome in Polish anaesthesiologists.

Science.gov (United States)

Misiołek, Aleksandra; Gorczyca, Piotr; Misiołek, Hanna; Gierlotka, Zbigniew

2014-01-01

Burnout syndrome is a psychological response to chronic work-related stress characterized by low enthusiasm towards the job, high psychological exhaustion, indolence and guilt. Being a medical doctor, both in Poland and in other countries, is one of the most stressful occupations and anaesthesiology is considered one of the most stressful specializations, which justify carrying out of the study on Polish anaesthesiologists. The aim of the study was to determine the prevalence of burnout syndrome in Polish anaesthesiologists Non-randomized cross-sectional study was carried out and data were gathered through a self-administrated questionnaire. The sample consisted of 373 Polish anaesthesiologists, 57.6% were women and 42.4% were men. A 66% response rate was achieved. The Burnout Syndrome was measured by the Spanish Burnout Inventory. The prevalence burnout risk was almost 70%. The percentage of participants who indicated very high levels of burnout was 18%; 5.9% of whom fell into profile 2 considered to be clinical. The instrument applied was reliable with Cronbach's alphas exceeding 0.70. The sample is characterized by high burnout risk with 5.9% of clinical cases. Participation in prevention programs is recommended.

Revision of the Paris Convention from the German point of view

International Nuclear Information System (INIS)

Mahlmann, Wilfried.

1977-01-01

The paper discusses the revision of the Paris Convention from the German point of view and states how this country has used the possibilities for exceptions provided under the Convention so that German nuclear third party liability legislation differs somewhat from the standards laid down in the Convention. This is explained by a desire to provide increased financial security for the population concerned. After describing various proposed procedures for increasing liability amounts in the Paris Convention and the Brussels Supplementary Convention the author concludes that his country would welcome a revision of the Conventions which would provide increased financial security for the public. (NEA) [fr

Study of Pneumatic Servo Loading System in Double-Sided Polishing

International Nuclear Information System (INIS)

Qian, N; Ruan, J; Li, W

2006-01-01

The precise double-sided polishing process is one of the main methods to get the ultra-smooth surface of workpiece. In double-sided polishing machine, a loading system is required to be able to precisely control the load superimposed on the workpiece, while the polishing is being carried out. A pneumatic servo loading system is proposed for this purpose. In the pneumatic servo system, the servo valve, which acts both the electrical to mechanical converter and the power amplifier, has a substantial influence on the performance of the loading system. Therefore a specially designed pneumatic digital servo valve is applied in the control system. In this paper, the construction of the pneumatic servo loading system in double-sided polishing machine and control strategy associated with the digital servo valve are first addressed. The mathematical model of the system established and the hardware of the pneumatic servo system is designed. Finally, the experiments are carried out by measuring the practical load on the workpiece and the quality of the surface finish. It is demonstrated that the error rate of load is less than 5% and a super-smooth surface of silicon wafer with roughness Ra 0.401 nm can be obtained

Tribochemical interaction between nanoparticles and surfaces of selective layer during chemical mechanical polishing

International Nuclear Information System (INIS)

Ilie, Filip

2013-01-01

Nanoparticles have been widely used in polish slurries such as those in the chemical mechanical polishing (CMP) process. For understanding the mechanisms of CMP, an atomic force microscope (AFM) is used to characterize polished surfaces of selective layers, after a set of polishing experiments. To optimize the CMP polishing process, one needs to get information on the interaction between the nano-abrasive slurry nanoparticles and the surface of selective layer being polished. The slurry used in CMP process of the solid surfaces is slurry with large nanoparticle size colloidal silica sol nano-abrasives. Silica sol nano-abrasives with large nanoparticle are prepared and characterized by transmission electron microscopy, particles colloidal size, and Zeta potential in this paper. The movement of nanoparticles in liquid and the interaction between nanoparticles and solid surfaces coating with selective layer are very important to obtain an atomic alloy smooth surface in the CMP process. We investigate the nanoparticle adhesion and removal processes during CMP and post-CMP cleaning. The mechanical interaction between nanoparticles and the wafer surface was studied using a microcontact wear model. This model considers the nanoparticle effects between the polishing interfaces during load balancing. Experimental results on polishing and cleaning are compared with numerical analysis. This paper suggests that during post-CMP cleaning, a combined effort in chemical and mechanical interaction (tribochemical interactions) would be effective in removal of small nanoparticles during cleaning. For large nanoparticles, more mechanical forces would be more effective. CMP results show that the removal rate has been improved to 367 nm/min and root mean square (RMS) of roughness has been reduced from 4.4 to 0.80 nm. Also, the results show that the silica sol nano-abrasives about 100 nm are of higher stability (Zeta potential is −65 mV) and narrow distribution of nanoparticle

Barriers and Limitations of Mentoring in Polish Organizations

Directory of Open Access Journals (Sweden)

Joanna Mesjasz

2013-09-01

Full Text Available In Polish organizations one can recognize a lot of barriers in the mentoring implementation. According to the author, at the root of these barriers are hierarchies of values: social, national, organizational, and hierarchies of values represented by individual employees. The purpose of this article is to trace the sources of constraints in the mentoring implementation process. The analysis is carried out on several levels: from the broadest social perspective, through the national to the perspective of the organization. In the article, there are also presented actions that should be taken by Polish organizations to overcome barriers and constraints in the mentoring implementation process.

Process optimization for ultrasonic vibration assisted polishing of micro-structured surfaces on super hard material

Science.gov (United States)

Sun, Zhiyuan; Guo, Bing; Rao, Zhimin; Zhao, Qingliang

2014-08-01

In consideration of the excellent property of SiC, the ground micro-structured surface quality is hard to meet the requirement - consequently the ultrasonic vibration assisted polishing (UVAP) of micro-structures of molds is proposed in this paper. Through the orthogonal experiment, the parameters of UVAP of micro-structures were optimized. The experimental results show that, abrasive polishing process, the effect of the workpiece feed rate on the surface roughness (Ra), groove tip radius (R) and material removal rate (MRR) of micro-structures is significant. While, the UVAP, the most significant effect factor for Ra, R and MRR is the ultrasonic amplitude of the ultrasonic vibration. In addition, within the scope of the polishing process parameters selected by preliminary experiments, ultrasonic amplitude of 2.5μm, polishing force of 0.5N, workpiece feed rate of 5 mm·min-1, polishing wheel rotational speed of 50rpm, polishing time of 35min, abrasive size of 100nm and the polishing liquid concentration of 15% is the best technology of UVAP of micro-structures. Under the optimal parameters, the ground traces on the micro-structured surface were removed efficiently and the integrity of the edges of the micro-structure after grinding was maintained efficiently.

The effect of different polishing systems on surface roughness and gloss of various resin composites.

Science.gov (United States)

Da Costa, Juliana; Ferracane, Jack; Paravina, Rade D; Mazur, Rui Fernando; Roeder, Leslie

2007-01-01

The purpose of this in vitro study was to evaluate the surface finish and gloss of five direct resin composites polished with six polishing systems. One hundred and fifty disk-shaped composite specimens (D=10.0 mm, 2-mm-thick, N=30 per material) were made. One side of each specimen was finished with a 16-fluted carbide finishing bur and then polished. Five specimens of each resin composite were randomly assigned to one of the six polishing systems. The surface roughness and gloss were measured with a surface profilometer and a glossmeter. The results were analyzed by two-way analysis of variance and Tukey's t-test (pgloss values between the composites and the polishing systems (p gloss value was recorded for Supreme + Pogo; the lowest was recorded for Z100 + Jiffy. Pogo showed the highest gloss values for all composites. The nanofill (Supreme) and minifill (Esthet-X) composites presented a surface roughness comparable to a microfill (Durafill), independent of the polishing system used, and a gloss comparable to a microfill, when polished with a one-step system (Pogo). As compared with the multiple-step systems, the smoothest surfaces and the highest gloss values were achieved using the one-step system (Pogo) for all the evaluated composites.

Music to Teach German By.

Science.gov (United States)

Schulte, Leo

1985-01-01

Discusses how music can be intergrated with regular lesson plans to teach German vocabulary, grammar, and history and to give insights into German culture. Also included are sources for basic background information, a list of recordings of the German music, and notes on selecting and presenting it in the language class. (SED)

Surface roughness of novel resin composites polished with one-step systems.

Science.gov (United States)

Ergücü, Z; Türkün, L S

2007-01-01

This study: 1) analyzed the surface roughness of five novel resin composites that contain nanoparticles after polishing with three different one-step systems and 2) evaluated the effectiveness of these polishers and their possible surface damage using scanning electron microscope (SEM) analysis. The resin composites evaluated in this study include CeramX, Filtek Supreme XT, Grandio, Premise and Tetric EvoCeram. A total of 100 discs (20/resin composites, 10 x 2 mm) were fabricated. Five specimens/resin composites cured under Mylar strips served as the control. The samples were polished for 30 seconds with PoGo, OptraPol and One Gloss discs at 15,000 rpm using a slow speed handpiece. The surfaces were tested for roughness (Ra) with a surface roughness tester and examined with SEM. One-way ANOVA was used for statistical analysis (p = 0.05). For all the composites tested, differences between the polishing systems were found to be significant (p One Gloss applications. For Grandio, Mylar and PoGo created equally smooth surfaces, while OptraPol and One Gloss produced equally rougher surfaces. Tetric EvoCeram exhibited the roughest surface with OptraPol, while no significant differences were found between Premise and CeramX. According to SEM images, OptraPol and One Gloss scratched and plucked the particles away from the surface, while PoGo created a uniform finish, although the roughness values were not the same for each composite. Effectiveness of the polishers seems to be material dependent.

Numerical Simulation Analysis of Five-Step Variable-Diameter Pipe with Solid-Liquid Two-Phase Abrasive Flow Polishing

Science.gov (United States)

Li, Junye; Zhang, Hengfu; Wu, Guiling; Hu, Jinglei; Liu, Yang; Sun, Zhihui

2018-01-01

In many areas of precision machining abrasive flow polishing technology has an important role. In order to study the influence of abrasive flow on the polishing effect of variable diameter parts, the fifth step variable diameter tube was taken as the research object to analyze the dynamic pressure and turbulent kinetic energy distribution of inlet velocity on the fifth-order variable diameter tube influences. Through comparative analysis, the abrasive flow polished variable diameter pipe parts have very effective and significant polishing effect and the higher the inlet speed, the more significant the polishing effect.

Microstructure of pulsed-laser deposited PZT on polished and annealed MGO substrates

NARCIS (Netherlands)

King, S.L.; Coccia, L.G.; Gardeniers, Johannes G.E.; Boyd, I.W.

1996-01-01

Thin films of Lead-Zirconate-Titanate (PZT) have been grown by pulsed-laser-deposition (PLD) onto polished MgO substrates both with and without pre-annealing. The surface morphology of polished MgO substrates, which are widely used for deposition, is examined by AFM. Commercially available,

Development of a multisensory arm for process monitoring in Robot Assisted Polishing

DEFF Research Database (Denmark)

Pilny, Lukas; Dalla Costa, Giuseppe; Bissacco, Giuliano

2015-01-01

A multisensory polishing arm with integrated three component force sensor, a miniature acoustic emission (AE) sensor and an accelerometer was developed for process monitoring in Robot Assisted Polishing (RAP) process. The arm design was optimized for integration of a force and an AE sensor. The f...

Portret oprawcy – rzecz do napisania – the thing to write

Directory of Open Access Journals (Sweden)

Sławomir Buryła

2012-01-01

Full Text Available This article synthesises the topic of the views of Nazi war criminals in the Polish post-war prose (1944–1989. The author enumerates the most important pieces of Polish prose treating the motif of German war criminals. This outline is an invitation to describe a portrait of the executioners and it signals several important problems related to the subject, including the question of the genesis of evil and the most important presentations of Nazis in Polish literature. Another significant issue is that of the transformation of the image of Nazis over time during the Communist era in Poland and the related stereotypes of Germans in Polish culture through history. The article also briefly discusses the topic of the executioners in the work of Jonathan Littell and Bogdan Rutha

[Józef Heller-one of organizers of Polish biochemistry in 1942-1973].

Science.gov (United States)

Zarebska, Zofia

2011-01-01

The article commemorates the activity of Józef Heller starting in 1921 with Jakub Parnas's group in Lvov which investigated the phosphorolysis of glycogen. The unknown events of His biography were disclosed, like military service in the Piłsudski's Legions at the rebirth of the Polish State and, subsequently, during the Nazi occupation of Poland--participation in the clandestine teaching of medical students. In the post-war times Józef Heller undertook teaching of medical students in Wrocław and next in Warsaw. In 1954 He begun to organize the Institute of Biochemistry and Biophysics of the Polish Academy of Sciences--it now continues its activity. Professor Heller initiated the publication in Poland of three major biochemical journals, including Postepy Biochemii (1954). Thanks to His leadership the first Polish Medical Dictionary was published (1981). The article summarizes the pursuit of Józef Heller in various branches of academic life, which were and still are appreciated by subsequent generations of Polish biochemists.

Surface roughness of zirconia for full-contour crowns after clinically simulated grinding and polishing.

Science.gov (United States)

Hmaidouch, Rim; Müller, Wolf-Dieter; Lauer, Hans-Christoph; Weigl, Paul

2014-12-01

The aim of this study was to evaluate the effect of controlled intraoral grinding and polishing on the roughness of full-contour zirconia compared to classical veneered zirconia. Thirty bar-shaped zirconia specimens were fabricated and divided into two groups (n=15). Fifteen specimens (group 1) were glazed and 15 specimens (group 2) were veneered with feldspathic ceramic and then glazed. Prior to grinding, maximum roughness depth (Rmax) values were measured using a profilometer, 5 times per specimen. Simulated clinical grinding and polishing were performed on the specimens under water coolant for 15 s and 2 N pressure. For grinding, NTI diamonds burs with grain sizes of 20 µm, 10 µm, and 7.5 µm were used sequentially. The ground surfaces were polished using NTI kits with coarse, medium and fine polishers. After each step, Rmax values were determined. Differences between groups were examined using one-way analysis of variance (ANOVA). The roughness of group 1 was significantly lower than that of group 2. The roughness increased significantly after coarse grinding in both groups. The results after glazing were similar to those obtained after fine grinding for non-veneered zirconia. However, fine-ground veneered zirconia had significantly higher roughness than venerred, glazed zirconia. No significant difference was found between fine-polished and glazed zirconia, but after the fine polishing of veneered zirconia, the roughness was significantly higher than after glazing. It can be concluded that for full-contour zirconia, fewer defects and lower roughness values resulted after grinding and polishing compared to veneered zirconia. After polishing zirconia, lower roughness values were achieved compared to glazing; more interesting was that the grinding of glazed zirconia using the NTI three-step system could deliver smooth surfaces comparable to untreated glazed zirconia surfaces.

Effects of finishing/polishing techniques on microleakage of resin-modified glass ilonomer cement restorations.

Science.gov (United States)

Yap, Adrian U J; Yap, W Y; Yeo, Egwin J C; Tan, Jane W S; Ong, Debbie S B

2003-01-01

This study investigated the effect of finishing/polishing techniques on the microleakage of resin-modified glass ionomer restorations. Class V preparations were made on the buccal and lingual/palatal surfaces of freshly extracted teeth. The cavities on each tooth were restored with Fuji II LC (FT [GC]) and Photac-Fil Quick (PF [3M-ESPE]) according to manufacturers' instructions. Immediately after light-polymerization, gross finishing was done with eight-fluted tungsten carbide burs. The teeth were then randomly divided into four groups and finishing/polishing was done with one of the following systems: (a) Robot Carbides (RC); (b) Super-Snap system (SS); (c) OneGloss (OG) and (d) CompoSite Polishers (CS). The sample size for each material-finishing/polishing system combination was eight. After finishing/polishing, the teeth were stored in distilled water at 37 degrees C for one week. The root apices were then sealed with acrylic and two coats of varnish was applied 1 mm beyond the restoration margins. The teeth were subsequently subjected to dye penetration testing (0.5% basic fuchsin), sectioned and scored. Data was analyzed using Kruskal-Wallis and Mann-Whitney U tests at a significance level of 0.05. Results of statistical analysis were as follows: Enamel margins: PF-OGpolishing technique, leakage at dentin margins was significantly greater than at enamel margins for FT. For PF, no significant difference in leakage scores was observed between dentin and enamel with the exception of finishing/polishing with OG. FT restorations had significantly less enamel and dentin leakage than PF restorations when treated with OG. The effect of finishing/polishing techniques on microleakage was both tissue and material dependent.

E-TOURISM SERVICES IN POLISH TOURISTS' OPINIONS

Directory of Open Access Journals (Sweden)

Joanna Papińska-Kacperek

2013-07-01

Full Text Available E-tourism is most often related only with web pages of travel agencies or aggregators offering many services, where it is possible to make transactions electronically. Whereas many applications and devices are applied in tourism, like the audio guides and mobile guides (sometimes with augmented reality functions, electronic cards in museums, 2D codes systems, web pages for individual tourists, geographic information systems (e.g. Google Street View, social network sites recommendation, and profiles of cities on social networks sites like Facebook. Polish tourists' opinions about mentioned innovative tools will be presented as the report from the survey conducted among students and graduates from three Polish universities. The objectives of the study are: investigating the popularity of e-tourist services in Poland and verifying whether municipal authorities promote e-tourism initiatives.

Chemical polishing of epitoxial silicon wafer

International Nuclear Information System (INIS)

Osada, Shohei

1978-01-01

SSD telescopes are used for the determination of the kind and energy of charged particles produced by nuclear reactions, and are the equipments combining ΔE counters and E counters. The ΔE counter is a thin SSD which is required to be thin and homogeneous enough to get the high resolution of measurement. The SSDs for ΔE counters have so far been obtained by polishing silicon plates mechanically and chemically or by applying electrolytic polishing method on epitaxial silicon wafers, but it was very hard to obtain them. The creative etching equipment and technique developed this time make it possible to obtain thin SSDs for ΔE counters. The outline of the etching equipment and its technique are described in the report. The etching technique applied for the silicon films for ΔE counters with thickness of about 10 μm was able to be experimentally established in this study. (Kobatake, H.)

Strategy of the Polish policy in the final phase of the Second world war

Directory of Open Access Journals (Sweden)

L. P. Shvab

2014-09-01

Full Text Available The problems of strategy formation of the Polish government, which was in emigration, during the Second World War in the period of the eastern front approaching to the Polish borders, are found out in the article. The author confirms that the success of the Red Army made London government to rise a question about the Polish eastern border and legitimacy of London government on the liberated territories. Both questions did not have the solution in the way of traditional Polish policy. Joseph Stalin expected concession in the issue of the eastern border instead of loyalty to the London government. But Polish government did not accept accomplished facts. The ambassadors Stanislav Kot, later Tadeush Romer negotiated and insisted on returning of the western Ukrainian and Byelorussian lands. They proposed military cooperation with the Polish Home Army, which supposed to be strong enough for diversionary acts. After the battle of Stalingrad victory and that resonance, which it had made in the world, Stalin refused from such cooperation, he thought that Poland was too weak partner. Stalin continued the escalation of the relations, he consciously stopped all diplomatic relations, flatly refused to continue discussion about borders and changed the way of discussion about the legitimacy of the authentic authority in Poland.

How do German bilingual schoolchildren process German prepositions? - A study on language-motor interactions.

Science.gov (United States)

Ahlberg, Daniela Katharina; Bischoff, Heike; Strozyk, Jessica Vanessa; Bryant, Doreen; Kaup, Barbara

2018-01-01

While much support is found for embodied language processing in a first language (L1), evidence for embodiment in second language (L2) processing is rather sparse. In a recent study, we found support for L2 embodiment, but also an influence of L1 on L2 processing in adult learners. In the present study, we compared bilingual schoolchildren who speak German as one of their languages with monolingual German schoolchildren. We presented the German prepositions auf (on), über (above), and unter (under) in a Stroop-like task. Upward or downward responses were made depending on the font colour, resulting in compatible and incompatible trials. We found compatibility effects for all children, but in contrast to the adult sample, there were no processing differences between the children depending on the nature of their other language, suggesting that the processing of German prepositions of bilingual children is embodied in a similar way as in monolingual German children.

Effect of prophylactic polishing protocols on the surface roughness of esthetic restorative materials.

Science.gov (United States)

Neme, A L; Frazier, K B; Roeder, L B; Debner, T L

2002-01-01

Many polishing protocols have been evaluated in vitro for their effect on the surface roughness of restorative materials. These results have been useful in establishing protocols for in vivo application. However, limited research has focused on the subsequent care and maintenance of esthetic restorations following their placement. This investigation evaluated the effect of five polishing protocols that could be implemented at recall on the surface roughness of five direct esthetic restorative materials. Specimens (n=25) measuring 8 mm diameter x 3 mm thick were fabricated in an acrylic mold using five light-cured resin-based materials (hybrid composite, microfilled composite, packable composite, compomer and resin-modified glass ionomer). After photopolymerization, all specimens were polished with Sof-Lex Disks to produce an initial (baseline) surface finish. All specimens were then polished with one of five prophylactic protocols (Butler medium paste, Butler coarse paste, OneGloss, SuperBuff or OneGloss & SuperBuff). The average surface roughness of each treated specimen was determined from three measurements with a profilometer (Surface 1). Next, all specimens were brushed 60,000 times at 1.5 Hz using a brush-head force of 2 N on a Manly V-8 cross-brushing machine in a 50:50 (w/w) slurry of toothpaste and water. The surface roughness of each specimen was measured after brushing (Surface 2) followed by re-polishing with one of five protocols, then final surface roughness values were determined (Surface 3). The data were analyzed using repeated measures ANOVA. Significant differences (p=0.05) in surface roughness were observed among restorative materials and polishing protocols. The microfilled and hybrid resin composite yielded significantly rougher surfaces than the other three materials following tooth brushing. Prophylactic polishing protocols can be used to restore a smooth surface on resin-based esthetic restorative materials following simulated tooth

Electroluminescence Analysis by Tilt Polish Technique of InP-Based Semiconductor Lasers

Science.gov (United States)

Ichikawa, Hiroyuki; Sasaki, Kouichi; Hamada, Kotaro; Yamaguchi, Akira

2010-03-01

We developed an effective electroluminescence (EL) analysis method to specify the degraded region of InP-based semiconductor lasers. The EL analysis method is one of the most important methods for failure analysis. However, EL observation was difficult because opaque electrodes surround an active layer. A portion of each electrode had to be left intact for wiring to inject the current. Thus, we developed a partial polish technique for the bottom electrode. Tilt polish equipment with a rotating table was introduced; a flat polished surface and a sufficiently wide remaining portion of the bottom electrode were obtained. As a result, clear EL from the back surface of the laser was observed.

Sword of Christ. Christian inspirations of Polish socialism before the January Uprising

Directory of Open Access Journals (Sweden)

Piotr Kuligowski

2012-06-01

Full Text Available The article presents the history of the Christian fraction of Polish socialism against the background of the era, from the very beginning until its end after the January Uprising. On the basis of the texts from the era the understanding of socialism, the principles of the program of Clusters of the Polish People and the anatomy of Fr. Piotr Ściegienny’s conspiracy have been reconstructed. The text reproduces the utopian ideas of social reconstruction by Zenon Świętosławski and Ludwik Królikowski and based on these the text also shows the place of Christian socialism in the Polish socialist thought.

Relationship Between Competitive Strategies and the Success Perception of Polish Born Globals

Directory of Open Access Journals (Sweden)

Baranowska-Prokop Ewa

2014-09-01

Full Text Available The key objective of this paper is to describe and evaluate the competitive strategies applied by Polish born global enterprises. To reveal these strategies, two competitive models developed by M.E. Porter are applied to an original data set obtained from 256 small and medium Polish enterprises through a survey employing the CATI technique. The outcomes of these strategies, as perceived by the companies applying them, are also evaluated against two hypotheses. We conclude that Polish firms apply both basic strategies of competition, i.e. cost leadership strategies and differentiation strategies and that a substantial majority of companies perceive themselves to have succeeded on the market.

Polish students’ opinion about medicinal cannabis

Directory of Open Access Journals (Sweden)

Rafał Mazur

2017-09-01

Conclusions: Polish students seem to be ready for introduction into medical marijuana and are aware of its therapeutic potential. The majority is in favor of sales in a controlled manner. The task of researchers should be accurate examination of the effectiveness of specific cannabinoids in the treatment of diseases.

Stress 'deafness' in a language with fixed word stress: an ERP study on Polish

Directory of Open Access Journals (Sweden)

Ulrike eDomahs

2012-11-01

Full Text Available The aim of the present contribution was to examine the factors influencing the prosodic processing in a language with predictable word stress. For Polish, a language with fixed penultimate stress but several well-defined exceptions, difficulties in the processing and representation of prosodic information have been reported (e.g., Peperkamp & Dupoux, 2002. The present study utilized event-related potentials (ERPs to investigate the factors influencing prosodic processing in Polish. These factors are i the predictability of stress and ii the prosodic structure in terms of metrical feet. Polish native speakers were presented with correctly and incorrectly stressed Polish words and instructed to judge the correctness of the perceived stress patterns. For each stress violation an early negativity was found which was interpreted as reflection of an error-detection mechanism, and in addition exceptional stress patterns (= antepenultimate stress and post-lexical (= initial stress evoked a task-related positivity effect (P300 whose amplitude and latency is correlated with the degree of anomaly and deviation from an expectation. Violations involving the default (= penultimate stress in contrast did not produce such an effect. This asymmetrical result is interpreted to reflect that Polish native speakers are less sensitive to the default pattern than to the exceptional or post-lexical patterns. Behavioral results are orthogonal to the electrophysiological results showing that Polish speakers had difficulties to reject any kind of stress violation. Thus, on a meta-linguistic level Polish speakers appeared to be stress-‘deaf’ for any kind of stress manipulation, whereas the neural reactions differentiate between the default and lexicalized patterns.

Influence of Duroc breed inclusion into Polish Landrace maternal line on pork meat quality traits

Directory of Open Access Journals (Sweden)

DOMINIKA GUZEK

2016-06-01

Full Text Available Crossbreeding with Duroc breed allows to improve meat quality, but no data is available regarding specific influence of Duroc breed on characteristics of meat in the case of crossbreeding with various breeds. The aim of the present research was to evaluate the effect of crossbreeding Polish Landrace dames with Duroc sires on quality features of meat in reference to Polish Landrace breed. The objects of the study were Longissimus dorsi lumborum pork muscles obtained from Polish Landrace breed and Polish Landrace x Duroc crossbreed animals. Sarcomere length measurements were conducted using microscopic method and basic chemical composition measurement was analyzed using spectrophotometric scanning. Texture analysis of meat samples, performed after thermal treatment was expressed by Warner-Bratzler shear force and color analysis was obtained using CIE L*a*b* color system. No differences in sarcomere length, shear force as well as components of color values between pork meat originated from Polish Landrace breed and Polish Landrace x Duroc crossbreed were observed. Analysis of basic chemical composition revealed higher fat and lower ash contents in the case of meat of Polish Landrace breed animals. It was concluded that the actual impact of breed on meat characteristics is possibly altered by other factors. It may be suggested that influence of basic chemical composition on color of meat is breed-related.

Influence of Duroc breed inclusion into Polish Landrace maternal line on pork meat quality traits.

Science.gov (United States)

Guzek, Dominika; Głąbska, Dominika; Głąbski, Krzysztof; Wierzbicka, Agnieszka

2016-05-31

Crossbreeding with Duroc breed allows to improve meat quality, but no data is available regarding specific influence of Duroc breed on characteristics of meat in the case of crossbreeding with various breeds. The aim of the present research was to evaluate the effect of crossbreeding Polish Landrace dames with Duroc sires on quality features of meat in reference to Polish Landrace breed. The objects of the study were Longissimus dorsi lumborum pork muscles obtained from Polish Landrace breed and Polish Landrace x Duroc crossbreed animals. Sarcomere length measurements were conducted using microscopic method and basic chemical composition measurement was analyzed using spectrophotometric scanning. Texture analysis of meat samples, performed after thermal treatment was expressed by Warner-Bratzler shear force and color analysis was obtained using CIE L*a*b* color system. No differences in sarcomere length, shear force as well as components of color values between pork meat originated from Polish Landrace breed and Polish Landrace x Duroc crossbreed were observed. Analysis of basic chemical composition revealed higher fat and lower ash contents in the case of meat of Polish Landrace breed animals. It was concluded that the actual impact of breed on meat characteristics is possibly altered by other factors. It may be suggested that influence of basic chemical composition on color of meat is breed-related.

German Language Proficiency among Students of Business and Management in the Czech Republic and its Perception: The Importance of German Language Skills on the Labour Market and the Role of Universities in Foreign Language Training

Directory of Open Access Journals (Sweden)

Zinecker Marek

2014-09-01

Full Text Available This paper presents the results of an empirical study designed to map German language proficiency among students at Czech universities of business and management. The results of this empirical survey can be summarised as follows. First, the ability of students at Czech universities of business and management to communicate in German is poor, and exceeds the general German language proficiency of the Czech population only to an insignificant extent. Second, the school environment (the opportunity to learn the language, compulsory subject, language study motivation has a decisive influence on the respondents’ ability to communicate in German. Third, nearly three-quarters of the respondents perceive German as a language that is very or rather important for their profession and career growth. Fourth, almost two-thirds of the respondents consider the role played by a university of business and management in the improvement of German language proficiency rather or very important. In conclusion, the study proposes directions for the potential development of the national educational system in the area of German language proficiency of university graduates in business and management in the Czech Republic, with an emphasis on the concept of content and language integrated learning (CLIL. We believe that the survey results are also very important from the point of view of enterprises operating in the Czech Republic because of the very close economic relations between the Czech Republic and German-speaking countries.

Research on Laser Micro Polishing of SLS Technology Sintered Iron-Based Powder Surface

Directory of Open Access Journals (Sweden)

Gerda Vaitkūnaitė

2015-03-01

Full Text Available The article analyzes laser micro polishing of 1.2083 steel samples produced applying selective laser sintering (SLS method. The study has evaluated the distribution of the shape, size and temperature of the laser beam treated area in the surface layer of sintered and laser polished samples. Experimental tests have shown the impact of the technical parameters of laser micro polishing on the width and hardness of the impact zone of the treated sample. The microstructure analysis of laser treated and untreated areas of the material has been made.

Together, Not Alone: Positive Peer Culture in a German School

Science.gov (United States)

Opp, Gunther; Unger, Nicola; Teichmann, Jana

2007-01-01

The many sea-changes in German culture have given rise to a growing population of children and youth at risk. This article describes the creation of a Positive Peer Culture in a special school for students with emotional and behavioural problems. The authors review challenges facing youth in modern Germany, the implementation of the PPC program,…

[Fifty years of the Polish School of Medicine at the University of Edinburgh (1941-1991)].

Science.gov (United States)

Tomaszewski, W

1994-01-01

The Polish School of Medicine at the University of Edinburgh started in 1941 on the initiative of the University. It was destined for soldier-students in the Polish Forces in Great Britain. This academic institution, unique in the history of universities, was a joint Scottish-Polish enterprise. An Agreement was concluded between the Polish Government in London and the University of Edinburgh. The School was an independent Polish academic institution and, at the same time, an integral part of the University of Edinburgh. The students matriculated at the University. The University provided all the laboratory and clinical facilities necessary for teaching. Due to a lack of Polish professors for some chairs a few of them were held by Scottish professors. Attached to them were Polish lecturers but the examinations were then held in English. The diploma, originally valid only in Poland, became recognised in Great Britain following an Act of Parliament in 1947. There were 337 students, a number of them women. 227 obtained the degree M.B., Ch.B. The war ended in 1945. The School continued up till 1949. Poland was not free. The Nazi occupation of Poland was replaced by Soviet domination which was to last for over 40 years. Only 22 of the graduates returned home, about 100 settled in G. Britain, another 100 dispersed world wide. The "magnanimous gesture" of the University of Edinburgh was thereafter remembered with gratitude by the members of the Polish School. In 1961, on the occasion of the 20th anniversary of the School, the first reunion of the graduates was organised in Birmingham for those settled in Gr. Britain. The success of the reunion prompted decision on organising annual "English" gatherings of the Polish graduates in Gr. Britain. The first world reunion of the graduates took place in Edinburgh in 1966, attracting a large number of participants on this occasion of the 25th anniversary of the School. That immensely successful anniversary of the Polish School

„Dezynfekcja”. Literatura polska wobec eksterminacji osób psychicznie chorych

Directory of Open Access Journals (Sweden)

Arkadiusz Morawiec

2017-12-01

Full Text Available The article concerns the theme of extermination of the mentally ill and handicapped in Polish literature. It outlines the basic facts regarding this crime perpetrated by the Nazis and indicates how Polish literature reacted to it. There are few works which deal with this crime. Writers (and historians probably considered the extermination of the mentally ill to be a fact of insignificance compared to other Nazi crimes, or knew little about it. Thus Polish literature treats it incidentally, by entering it in another, more extensive or “more important” issue (the extermination of the Jews, the extermination of the Polish population, or treats it as an occasion to take up “more fundamental” (ideological problems. The article analyzes famous works, Stanisław Lem’s novel Hospital of the Transfiguration and Andrzej Bursa’s poem The liquidation of the mentally ill in Kobierzyn by the Germans, and less known texts: Piotr Matywiecki’s poem *** [Dragged into the sun….] and Anna Dziewit-Meller’s novel Mount Taygetus.

Clear and compelling evidence: the Polish tribunal on abortion rights.

Science.gov (United States)

Girard, Françoise; Nowicka, Wanda

2002-05-01

On 25 July 2001 the Polish Federation for Women and Family Planning organised a Tribunal on Abortion Rights in Warsaw, to publicize the negative consequences of the criminalization of abortion in Poland. A panel of Polish and foreign experts heard the testimonials of seven Polish women's experiences under the 1993 "Anti-Abortion Act". Only two of the seven women were able to tell their stories in person. One died in 2001, at the age of 21, of an unsafe abortion. One is legally blind after having carried her last pregnancy to term. One is in prison for infanticide, which in all likelihood was committed by her boyfriend. National and foreign journalists were in attendance, as well as observers from all walks of life--writers, students, mothers, activists, feminists, husbands. The evidence was clear and compelling. Restrictive abortion laws make abortion unsafe by pushing it underground, endanger women's health, create a climate where even those services that are allowed by law-become unavailable, and contravene standards set by international human rights law. The restrictive abortion law in Poland has not increased the number of births; it has only caused women and their families suffering. The Tribunal brought the issue of abortion into the media prior to an election campaign and galvanised Polish and other Eastern European women's groups to become more active in defence of abortion rights.

Fracking in the Polish press: Geopolitics and national identity

International Nuclear Information System (INIS)

Jaspal, Rusi; Nerlich, Brigitte; Lemańcyzk, Szczepan

2014-01-01

In a context of resource scarcity and political instability, new energy sources and technologies are being explored in many parts of the world and exploited in some. One of these new energy sources is shale gas and one of the countries seeking to decrease its energy dependence and increase its energy security is Poland which is largely dependent on gas and oil imports from Russia. This article presents the results of a thematic content analysis of articles reporting on shale gas/fracking published in Gazeta Wyborcza and Rzeczpospolita, two leading Polish newspapers, from 1 January 2010 to 31 December 2012. Findings suggest that in media reporting the geopolitical dimension of fracking overrides the technological/scientific dimension and that representations are overwhelmingly positive. Positive representations are bolstered through particular linguistic framings. It is argued that the Polish press has polarized the debate on fracking in a particular (positive) direction, which has silenced an open and constructive debate concerning energy policy in Poland and constructed criticism of fracking as counter-normative and “un-Polish.” The potential socio-political and policy implications of these media representations are discussed. - Highlights: • The general tone of Polish media reporting is positive and emphatic about the benefits of fracking. • The geopolitical dimension of fracking overrides the technological/scientific dimension. • The implementation of fracking is constructed as a national priority. • Opposition to fracking is constructed as counter-normative and “anti-Polish”. • Representations impede open and constructive dialogue about energy policy

Effect of finishing and polishing procedures on surface roughness, gloss and color of resin-based composites.

Science.gov (United States)

Paravina, Rade D; Roeder, Leslie; Lu, Huan; Vogel, Karin; Powers, John M

2004-08-01

To evaluate the effects of different finishing and polishing procedures on surface roughness, gloss and color of five resin composites: two experimental microhybrid composites - FZ-Dentin (FZD) and FZ-Enamel (FZE), one commercial microhybrid composite - Esthet-X (EX), and two microfilled composites - Heliomolar (HM) and Renamel Microfill (RM). Surface roughness, gloss and color of the disc-shaped specimens (10 mm in diameter and 2-mm thick) were measured as Mylar (baseline), 16-fluted carbide bur and polishing were completed. Sixteen specimens of each composite were randomized to four groups of four. After finishing with a 16-fluted finishing bur, each group was polished by a different system: 1. Astropol (A), 2. Sof-lex disc (S), 3. Po-Go (P), 4. Enhance (E). Average surface roughness (Ra) was measured with a profilometer. Gloss measurements were performed using small-area glossmeter, while color coordinate values were recorded using a spectrophotometer. A deltaE*abgloss ranked according to polishing system (for all five composites together) was: P > E > A > S. The order of gloss values for the polished composites (for each of four polishing systems) was: RM > FZD > FZE > HM > EX. Fisher's PLSD intervals at the 0.05 level of significance for comparisons of means of surface roughness among five composites and four polishing systems were 0.01 and 0.01 microm, respectively. Fisher's PLSD intervals at the 0.05 level of significance for comparisons of means of gloss among five composites and four polishing systems were 6 and 5 GU, respectively. Color differences (deltaE*ab) among five composites and four polishing methods were found to range from 0.2 to 1.1.

Word Boundaries in L2 Speech: Evidence from Polish Learners of English

Science.gov (United States)

Schwartz, Geoffrey

2016-01-01

Acoustic and perceptual studies investgate B2-level Polish learners' acquisition of second language (L2) English word-boundaries involving word-initial vowels. In production, participants were less likely to produce glottalization of phrase-medial initial vowels in L2 English than in first language (L1) Polish. Perception studies employing word…

Medicine and Physiotherapy students: are they physically active? Comparative research on Spanish and German population.

Science.gov (United States)

Zeńczak-Praga, Krystyna; Pluto-Prondzinska, Joanna; Zgorzalewicz-Stachowiak, Małgorzata

2017-05-23

Despite the fact that regular physical activity is beneficial to human life, there are still more and more overweight and obese people throughout the world today. Healthy habits taken from home or socioeconomic situation are factors which might influence on regular physical activity. People who lead a healthy lifestyle in childhood are also active during adulthood. On the other hand academic life might promote less healthy lifestyle. The aim of the study was to assess and compare the level of physical activity of both German and Spanish students of Medicine and Physiotherapy. The study involved 100 Spanish and 100 German students aged from 19 to 24 years. Based on Eurobarometer 72.3, the respondents were asked a set of questions regarding physical activity. The chi-squared test (χ2) and Mann-Whitney U test were used for the statistical analysis. The vast majority of students presented a normal BMI value, but it was not related to high physical activity. More than one-third of all students seldom practised any sports. The Spanish students usually did some form of physical activity outdoors, whereas the German students exercised in a fitness centre. Lack of time was to the Medicine and Physiotherapy students the most significant factor that did not allow them to be more physically active. Medicine and Physiotherapy students should be more physically active in order to promote a good, healthy lifestyle model to society and there should be more physical activity education to encourage more students to practise sports.

Working conditions and effort-reward imbalance of German physicians in Sweden respective Germany: a comparative study.

Science.gov (United States)

Ohlander, Johan; Weigl, Matthias; Petru, Raluca; Angerer, Peter; Radon, Katja

2015-05-01

Work stress among physicians is a growing concern in various countries and has led to migration. We compared the working conditions and the work stress between a migrated population of German physicians in Sweden and a population of physicians based in Germany. Additionally, specific risk factors for work stress were examined country wise. Using a cross-sectional design, 85 German physicians employed in Sweden were surveyed on working conditions and effort-reward imbalance and compared with corresponding data on 561 physicians working in Germany. Multiple linear regression analyses were applied on both populations separately to model the associations between working conditions and effort-reward ratio (ERR), adjusted for a priori confounders. German physicians in Sweden had a significantly lower ERR than physicians in Germany: mean (M) = 0.47, standard deviation (SD) = 0.24 vs. M = 0.80, SD = 0.35. Physicians in Sweden worked on average 8 h less per week and reported higher work support and responsibility. Multivariate analyses showed in both populations a negative association between work support and the ERR (β = -0.148, 95% CI -0.215 to (-0.081) for physicians in Sweden and β = -0.174, 95% CI -0.240 to (-0.106) for physicians in Germany). Further significant associations with the ERR were found among physicians in Sweden for daily breaks (β = -0.002, 95% CI -0.004 to (-0.001)) and among physicians in Germany for working hours per week (β = 0.006, 95% CI 0.002-0.009). Our findings show substantial differences in work stress and working conditions in favor of migrated German physicians in Sweden. To confirm our results and to explain demonstrated differences in physicians' work stress, longitudinal studies are recommended.

Optimized pre-thinning procedures of ion-beam thinning for TEM sample preparation by magnetorheological polishing.

Science.gov (United States)

Luo, Hu; Yin, Shaohui; Zhang, Guanhua; Liu, Chunhui; Tang, Qingchun; Guo, Meijian

2017-10-01

Ion-beam-thinning is a well-established sample preparation technique for transmission electron microscopy (TEM), but tedious procedures and labor consuming pre-thinning could seriously reduce its efficiency. In this work, we present a simple pre-thinning technique by using magnetorheological (MR) polishing to replace manual lapping and dimpling, and demonstrate the successful preparation of electron-transparent single crystal silicon samples after MR polishing and single-sided ion milling. Dimples pre-thinned to less than 30 microns and with little mechanical surface damage were repeatedly produced under optimized MR polishing conditions. Samples pre-thinned by both MR polishing and traditional technique were ion-beam thinned from the rear side until perforation, and then observed by optical microscopy and TEM. The results show that the specimen pre-thinned by MR technique was free from dimpling related defects, which were still residual in sample pre-thinned by conventional technique. Nice high-resolution TEM images could be acquired after MR polishing and one side ion-thinning. MR polishing promises to be an adaptable and efficient method for pre-thinning in preparation of TEM specimens, especially for brittle ceramics. Copyright © 2017 Elsevier B.V. All rights reserved.

The Road to Negative Behavior: Discriminatory Intentions in the German Population

Directory of Open Access Journals (Sweden)

Ulrich Wagner

2007-01-01

Full Text Available This study analyzes discriminatory intentions shared by members of the German majority against several outgroups in Germany. Patterns of discriminatory intentions against various minority groups were investigated for several indicators, including gender, age, and political orientation, by means of a representative survey (N = 1,778. The relationship between prejudices and discriminatory intentions against different target groups was also analyzed. Prejudice and discriminatory intentions show moderate but consistently positive correlations in relation to one and the same target group. Moreover, it was found that discriminatory intentions against one outgroup are related to hostile attitudes towards other outgroups, too. The results support the hypothesis of a syndrome of group-focused enmity.

Retrospective search for dengue vector mosquito Aedes albopictus in areas visited by a German traveler who contracted dengue in Japan

Directory of Open Access Journals (Sweden)

Mutsuo Kobayashi

2014-09-01

Full Text Available A German traveler developed dengue fever in late August 2013, following a direct flight from Germany. Autochthonous dengue virus (DENV infection has not been reported in Japan. To evaluate the risk of autochthonous DENV transmission in Japan, the authors performed a retrospective search of the five areas visited by the German patient to determine the population density of dengue vector mosquito, Aedes albopictus. The annual mean temperature of each area was higher than 12 °C, which is considered suitable for the establishment of A. albopictus populations. Our retrospective search revealed the population density of A. albopictus to be high in the urban areas of Japan.

Precision machining and polishing of scintillating crystals for large calorimeters and hodoscopes

International Nuclear Information System (INIS)

Wuest, C.R.; Fuchs, B.A.

1993-05-01

New machining and polishing techniques have been developed for large barium fluoride scintillating crystals that provide crystalline surfaces without sub-surface damage or deformation as verified by Atomic Force Microscopy (AFM) and Rutherford Back-scattering (RBS) analyses. Surface roughness of about 10--20 angstroms and sub-micron mechanical tolerances have been demonstrated on large crystal samples. Mass production techniques have also been developed for machining and polishing up to five 50 cm long crystals at one time. We present this technology along with surface studies of barium fluoride crystals polished with this technique. This technology is applicable for a number of new crystal detectors proposed at Colliders including the Barium Fluoride Electromagnetic Calorimeter at SSC, the Crystal Clear Collaboration's cerium fluoride calorimeter at LHC, and the KTeV and PHENIX scintillating hodoscopes at Fermilab, and RHIC, respectively. Lawrence Livermore National Laboratory (LLNL) has an active program of study on barium fluoride scintillating crystals for the Barium Fluoride Electromagnetic Calorimeter Collaboration and cerium fluoride and lead fluoride for the Crystal Clear Collaboration. This program has resulted in a number of significant improvements in the mechanical processing, polishing and coating of fluoride crystals. Techniques have been developed using diamond-loaded pitch lapping that can produce 15 angstrom RMS surface finishes over large areas. Also, special polishing fixtures have been designed based on mounting technology developed for the 1.1 m diameter optics used in LLNL's Nova Laser. These fixtures allow as many as five 25--50 cm long crystals to be polished and lapped at the same time with tolerances satisfying the stringent requirements of crystal calorimeters. We also discuss results on coating barium fluoride with UV reflective layers of magnesium fluoride and aluminum

OSSM2008 Polish Moessbauer Community Meeting: Program, Abstracts and List of Participants

International Nuclear Information System (INIS)

2008-01-01

The Polish Moessbauer Community Meeting - OSSM2008 has been organized by Polish scientists using the Moessbauer spectroscopy in their research. Main subjects of the meeting are investigations of modern materials electronic structure by means of Moessbauer effect (ME), using ME in biological test of tissue diseases and ME investigation of physical properties of different steels

Mechanical polishing as an improved surface treatment for platinum screen-printed electrodes

Directory of Open Access Journals (Sweden)

Junqiao Lee

2016-07-01

Full Text Available The viability of mechanical polishing as a surface pre-treatment method for commercially available platinum screen-printed electrodes (SPEs was investigated and compared to a range of other pre-treatment methods (UV-Ozone treatment, soaking in N,N-dimethylformamide, soaking and anodizing in aqueous NaOH solution, and ultrasonication in tetrahydrofuran. Conventional electrochemical activation of platinum SPEs in 0.5 M H2SO4 solution was ineffective for the removal of contaminants found to be passivating the screen-printed surfaces. However, mechanical polishing showed a significant improvement in hydrogen adsorption and in electrochemically active surface areas (probed by two different redox couples due to the effective removal of surface contaminants. Results are also presented that suggest that SPEs are highly susceptible to degradation by strong acidic or caustic solutions, and could potentially lead to instability in long-term applications due to continual etching of the binding materials. The ability of SPEs to be polished effectively extends the reusability of these traditionally “single-use” devices. Keywords: Screen-printed electrodes, Polishing, Platinum, Activation, Pre-treatment, Cyclic voltammetry

ECONOMIC CRISES – GLOBAL AND LOCAL – IN REFLECTION OF POLISH PRESS

Directory of Open Access Journals (Sweden)

Krzysztof Gibek

2010-01-01

Full Text Available One of the sociological features of the current economic crises had been its beginning as a media fact rather than economic reality for ordinary people in Poland. Until the very end of 2008 the offi cial strategy of Polish government was denying of present of any economic crises in Poland: “The Polish economy as well as Polish banking system are used to be healthy and in good conditions and we will be suffer a little slow done because we are not an island”. Unfortunately it occurs not to be true.Based on discourse analysis of two major Polish daily and two weekly we would like to show the evolution of narrative describing crises in global terms and particularly at the domestic market. What was the picture of global crises at the beginning of this discussion, how it supposed to affect Poland, who serve as experts and opinion givers and finally how through the language we can observe the change from ‘slow down’ to ‘crises’? This are basic questions we would like to answer in our text.

Self-reported quality of life in multiple sclerosis patients: preliminary results based on the Polish MS Registry.

Science.gov (United States)

Brola, Waldemar; Sobolewski, Piotr; Fudala, Małgorzata; Flaga, Stanisław; Jantarski, Konrad; Ryglewicz, Danuta; Potemkowski, Andrzej

2016-01-01

The aim of the study was to analyze selected clinical and sociodemographic factors and their effects on the quality of life (QoL) of multiple sclerosis (MS) patients registered in the Polish MS Registry. This was a cross-sectional observational study performed in Poland. Data on personal and disease-specific factors were collected between January 1, 2011, and December 31, 2015, via the web portal of the Polish MS Registry. All patients were assessed by a physician and asked to complete the Polish language versions of the following self-evaluation questionnaires: EuroQol 5-Dimensions, EuroQoL Visual Analog Scale, and Multiple Sclerosis Impact Scale. Univariate analysis and logistic regression were performed to determine the factors associated with QoL. The study included 2,385 patients (female/male ratio 2.3:1) with clinically confirmed MS (mean age 37.8±9.2 years). Average EuroQol 5-Dimensions index was 0.72±0.24, and the mean EuroQoL Visual Analog Scale score was 64.2±22.8. The average Multiple Sclerosis Impact Scale score was 84.6±11.2 (62.2±18.4 for physical condition and 23.8±7.2 for mental condition). Lower QoL scores were significantly associated with higher level of disability (odds ratio [OR], 0.932; 95% confidence interval [CI], 0.876-0.984; P=0.001), age >40 years (OR, 1.042; 95% CI, 0.924-1.158; P=0.012), longer disease duration (OR, 0.482; 95% CI, 0.224-0.998; P=0.042), and lack of disease modifying therapies (OR, 0.024; 95% CI, 0.160-0.835; P=0.024). No significant associations were found between QoL, sex, type of MS course, patient's education, and marital status. The Polish MS Registry is the first national registry for long-term observation that allows for self-evaluation of the QoL. QoL of Polish patients with MS is significantly lower compared with the rest of the population. The parameter is mainly affected by the level of disability, duration of the disease, and limited access to immunomodulatory therapy.

Profilometric analysis of two composite resins' surface repolished after tooth brush abrasion with three polishing systems.

Science.gov (United States)

Uppal, Mudit; Ganesh, Arathi; Balagopal, Suresh; Kaur, Gurleen

2013-07-01

To evaluate the effect of three polishing protocols that could be implemented at recall on the surface roughness of two direct esthetic restorative materials. Specimens (n = 40) measuring 8 mm (length) × 5 mm (width) × 4 mm (height) were fabricated in an acrylic mold using two light-cured resin-based materials (microfilled composite and microhybrid composite). After photopolymerization, all specimens were finished and polished with one of three polishing protocols (Enhance, One Gloss, and Sof-Lex polishing systems). The average surface roughness of each treated specimen was determined using 3D optical profilometer. Next all specimens were brushed 60,000 times with nylon bristles at 7200 rpm using crosshead brushing device with equal parts of toothpaste and water used as abrasive medium. The surface roughness of each specimen was measured after brushing followed by repolishing with one of three polishing protocols, and then, the final surface roughness values were determined. The data were analyzed using one-way and two-factor analysis of variance (ANOVA) and Tukey's honestly significant difference (HSD). Significant difference (P < 0.05) in surface roughness was observed. Simulated brushing following initial polishing procedure significantly roughened the surface of restorative material (P < 0.05). Polishing protocols can be used to restore a smooth surface on esthetic restorative materials following simulated tooth brushing.

Development of clean chemical mechanical polishing systems; Clean CMP system

Energy Technology Data Exchange (ETDEWEB)

Tsujimura, M.; Hosokawa, M. [Ebara Corp., Tokyo (Japan)

1998-10-20

Described herein are clean chemical mechanical polishing (CMP) systems developed by Ebara. A CMP system needs advanced peripheral techniques, in addition to those for grinding adopted by the conventional system, in order to fully exhibit its inherent functions. An integrated design concept is essential for the CMP steps, including slurry supplying, polishing, washing, process controlling and waste fluid treatment. The Ebara has adopted a standard concept `Clean CMP, dry-in and dry-out of wafers,` and provided world`s highest grades of techniques for inter-layer insulating film, shallow trench isolation, plug and wiring. The head for the polishing module is specially designed by FEM, to improve homogeneity of wafers from the center to edges. The dresser is also specially designed, to improve pad surface topolody after dressing. A slurry dipsersing method is developed to reduce slurry consumption. Various washing modules, designed to have the same external shape, can be allocated to various functions. 10 figs.

Soft tissue adhesion of polished versus glazed lithium disilicate ceramic for dental applications.

Science.gov (United States)

Brunot-Gohin, C; Duval, J-L; Azogui, E-E; Jannetta, R; Pezron, I; Laurent-Maquin, D; Gangloff, S C; Egles, C

2013-09-01

Ceramics are widely used materials for prosthesis, especially in dental fields. Despite multiple biomedical applications, little is known about ceramic surface modifications and the resulting cell behavior at its contact. The aim of this study is to evaluate the biological response of polished versus glazed surface treatments on lithium disilicate dental ceramic. We studied a lithium disilicate ceramic (IPS e.max(®) Press, Ivoclar Vivadent) with 3 different surface treatments: raw surface treatment, hand polished surface treatment, and glazed surface treatment (control samples are Thermanox(®), Nunc). In order to evaluate the possible modulation of cell response at the surface of ceramic, we compared polished versus glazed ceramics using an organotypic culture model of chicken epithelium. Our results show that the surface roughness is not modified as demonstrated by equivalent Ra measurements. On the contrary, the contact angle θ in water is very different between polished (84°) and glazed (33°) samples. The culture of epithelial tissues allowed a very precise assessment of histocompatibility of these interfaces and showed that polished samples increased cell adhesion and proliferation as compared to glazed samples. Lithium disilicate polished ceramic provided better adhesion and proliferation than lithium disilicate glazed ceramic. Taken together, our results demonstrate for the first time, how it is possible to use simple surface modifications to finely modulate the adhesion of tissues. Our results will help dental surgeons to choose the most appropriate surface treatment for a specific clinical application, in particular for the ceramic implant collar. Copyright © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Family resilience – definition of construct and preliminary results of the Polish adaptation of the Family Resilience Assessment Scale (FRAS

Directory of Open Access Journals (Sweden)

Natalia Nadrowska

2017-05-01

Full Text Available Background The article describes construct of family resilience with the main focus on the model Walsh. The aim of this article is to present preliminary results: adaptation, reliability, statistical analyses of the Family Resilience Assessment Scale (FRAS for the Polish population. Participants and procedure Participants (n = 329, aged 18-35, completed experimental Polish version of the FRAS (SPR – Skala Prężności Rodzinnej. In the procedure of adaptation, scale was translated and modified into Polish. Scale consists of the following subscales: Family Communication and Problem Solving, Utilizing Social and Economic Resources, Maintaining a Positive Outlook, Family Connectedness, Family Spirituality and Ability to Make Meaning of Adversity. Results The reliability of the experimental Polish version of the FRAS for the entire scale and five subscales are satisfactory. Only subscale Ability to Make Meaning of Adversity obtained reliability of less than 0.7. Taking into account the diversity of gender and declaring the passage through the difficult events were observed significant differences in the three scales: Family Communication and Problem Solving, Family Connectedness, Ability to Make Meaning of Adversity and total scale of FRAS. Conclusions The work on the questionnaire is still in progress and the results presented here should be considered as preliminary. In the next steps, the number of men should be increased in order to perform confirmatory factor analysis. Future studies should take into account a number of factors and contexts (e.g. family structure, social and cultural context and the type of stressful event.

Integrins AV and B8 Gene Polymorphisms and Risk for Intracerebral Hemorrhage in Greek and Polish Populations.

Science.gov (United States)

Dardiotis, Efthimios; Siokas, Vasileios; Zafeiridis, Tilemachos; Paterakis, Konstantinos; Tsivgoulis, Georgios; Dardioti, Maria; Grigoriadis, Savas; Simeonidou, Constantina; Deretzi, Georgia; Zintzaras, Elias; Jagiella, Jeremiasz; Hadjigeorgiou, Georgios M

2017-03-01

Α limited number of genetic variants have been linked to the development of intracerebral hemorrhage (ICH). Ιntegrin AV and/or B8-deficient mice were found to develop ICH. The present candidate gene association study was designed to investigate possible influence of integrin AV (ITGAV) and integrin B8 (ITGB8) gene region polymorphisms on the risk of ICH. 1015 participants (250 Greek and 193 Polish patients with primary ICH and 250 Greek and 322 Polish controls) were included in the study. Using logistic regression analyses, 11 tag single nucleotide polymorphisms (SNPs) for ITGAV and 11 for ITGB8 gene were tested for associations with ICH risk, lobar ICH risk and non-lobar ICH after adjustment for age, gender, history of hypertension and country of origin. Linear regression models were used to test the effect of tag SNPs on the ICH age of onset. Correction for multiple comparisons was carried out. The rs7565633 tag SNP of the ITGAV gene was independently associated with the risk of lobar ICH in the codominant model of inheritance [odds ratio (95 % confidence interval (CI)) 0.56 (0.36-0.86), p = 0.0013]. Furthermore, heterozygous individuals of the rs10251386 and the rs10239099 of the ITGB8 gene had significantly lower age of ICH onset compared to the wild-type genotypes [regression coefficient (b) -3.884 (95 % CI -6.519, -1.249), p = 0.0039 and b = -4.502 (95 % CI -7.159, -1.845), p = 0.0009, respectively]. The present study provides preliminary indication for an influence of ITGAV gene tag SNP in the development of lobar ICH and of ITGB8 gene variants in the age of ICH onset.

Layers of root nouns in Germanic

DEFF Research Database (Denmark)

Hansen, Bjarne Simmelkjær Sandgaard

2017-01-01

The root-noun declension became productive in early Germanic, containing (I) inherited root nouns, (IIa) original substrate or loan words, and transitions from other declensions in (IIb) Proto-Germanic and (III) North Germanic. As ablaut was abolished, the inherited type would display ablaut grades...

A Study of Polishing Feature of Ultrasonic-Assisted Vibration Method in Bamboo Charcoal

Directory of Open Access Journals (Sweden)

Hsin-Min Lee

2017-01-01

Full Text Available Focusing on the feature of porosity in bamboo charcoal, this study applies the ultrasonic-assisted vibration method to perform surface polishing of the silicon wafer workpiece. The self-developed bamboo charcoal polishing spindle and ultrasonic- assisted vibration mechanism are attached to a single lapping machine. In the machining process, ultrasonic vibration enables the diamond slurry to smoothly pass through the microscopic holes of bamboo charcoal; the end of the bamboo charcoalis able to continue machining on the surface of the workpiece through the grasping force which exists in the microscopic holes. Under the polishing and machining parameters of ultrasonic-assisted vibration, with a diamond slurry concentration of 0.3%, the experimental results show a polishing time of 20 min, a loading of 25 N on the workpiece surface, a spindle speed of 1200 rpm, a vibration frequency of 30 kHz and the original surface roughness value of Ra 0.252 μm equals that of a mirror-like surface at Ra 0.017 μm. These research results prove that by using bamboo charcoal and ultrasonic-assisted vibration for polishing, a very good improvement can be achieved on the workpiece surface.

Globes and Teaching Aids Manufactured by Jan Felkl Company for the Polish Market

Directory of Open Access Journals (Sweden)

Malgorzata Taborska

2016-05-01

Full Text Available Jan Felkl company from Roztoky (Roztok near Prague manufactured globes in seventeen language versions, since 1861 also in Polish language. The company was active until 1952, but it ceased to manufacture Polish-language globes as early as in 1914. In the aftermath of the First World War, and with the development of printing business, the demand for Czech globes shrank. It is difficult to estimate the overall output of Polish- language globes manufactured by Felkl’s company throughout the 53 years it operated. From catalogues and the surviving globes we know that terrestrial globes in six sizes, folding globes in two sizes, celestial globes (probably in four sizes, as well as telluria, lunaria and planetaria were manufactured for the Polish market. It is difficult to decide how many editions of individual types of globes were issued. Polish names were compiled by Franciszek Waligórski (one globe and Mirosław Suchecki. Only 28 globes have survived to this day, including one celestial globe. Most of them are globes of an 8-inch diameter, approved by the Austrian ministries as teaching aids for schools. Nearly half of the surviving globes date from the years 1894–1914. Only ten items are in museums.

Are Polish Primary School Pupils in Favor of Wearing Uniforms? Snapshot Comment

Science.gov (United States)

Asotska, Julia; Butler, Norman L.; Davidson, Barry S.; Griffith, Kimberly Grantham; Brown, Veda E.; Kritsonis, Wiilliam Allan

2007-01-01

The purpose of this article is to discuss whether Polish primary school pupils want to wear uniforms, and it is motivated by the Polish government's recently proposed policy: Zero Tolerance for Violence at School. Seventy one pupils, who attend Podstawowka Nr30 school in Cracow, were surveyed, and the authors found that most pupils are not in…

Validation of the German version of the insomnia severity index in adolescents, young adults and adult workers: results from three cross-sectional studies.

Science.gov (United States)

Gerber, Markus; Lang, Christin; Lemola, Sakari; Colledge, Flora; Kalak, Nadeem; Holsboer-Trachsler, Edith; Pühse, Uwe; Brand, Serge

2016-05-31

A variety of objective and subjective methods exist to assess insomnia. The Insomnia Severity Index (ISI) was developed to provide a brief self-report instrument useful to assess people's perception of sleep complaints. The ISI was developed in English, and has been translated into several languages including German. Surprisingly, the psychometric properties of the German version have not been evaluated, although the ISI is often used with German-speaking populations. The psychometric properties of the ISI are tested in three independent samples: 1475 adolescents, 862 university students, and 533 police and emergency response service officers. In all three studies, participants provide information about insomnia (ISI), sleep quality (Pittsburgh Sleep Quality Index), and psychological functioning (diverse instruments). Descriptive statistics, gender differences, homogeneity and internal consistency, convergent validity, and factorial validity (including measurement invariance across genders) are examined in each sample. The findings show that the German version of the ISI has generally acceptable psychometric properties and sufficient concurrent validity. Confirmatory factor analyses show that a 1-factor solution achieves good model fit. Furthermore, measurement invariance across gender is supported in all three samples. While the ISI has been widely used in German-speaking countries, this study is the first to provide empirical evidence that the German version of this instrument has good psychometric properties and satisfactory convergent and factorial validity across various age groups and both men and women. Thus, the German version of the ISI can be recommended as a brief screening measure in German-speaking populations.

Preußisch Holland/Paslek - die Wende des Jahres 1945. Die Vertreibung/Aussiedlung der deutschen Bevölkerung 1945-1947.

OpenAIRE

Wisniewska, Joanna Ewa

2006-01-01

Below mentioned Dissertation depicts one of the most complex issues of polish/german questions of post war history: German nation eviction from the territory handed over to Polish administration as a result of Potsdam pact. This issue applies to the area of present-day Paslek district (former Kreis Preußisch Holland) situated in western part of the previously known Eastern Prussia (now Warmia and Mazury region).Time range indicate on one hand permission of district evacuation (21 Jan 1945) an...

How do German bilingual schoolchildren process German prepositions? – A study on language-motor interactions

Science.gov (United States)

Bischoff, Heike; Strozyk, Jessica Vanessa; Bryant, Doreen; Kaup, Barbara

2018-01-01

While much support is found for embodied language processing in a first language (L1), evidence for embodiment in second language (L2) processing is rather sparse. In a recent study, we found support for L2 embodiment, but also an influence of L1 on L2 processing in adult learners. In the present study, we compared bilingual schoolchildren who speak German as one of their languages with monolingual German schoolchildren. We presented the German prepositions auf (on), über (above), and unter (under) in a Stroop-like task. Upward or downward responses were made depending on the font colour, resulting in compatible and incompatible trials. We found compatibility effects for all children, but in contrast to the adult sample, there were no processing differences between the children depending on the nature of their other language, suggesting that the processing of German prepositions of bilingual children is embodied in a similar way as in monolingual German children. PMID:29538404

Combined Ultrasonic Elliptical Vibration and Chemical Mechanical Polishing of Monocrystalline Silicon

Directory of Open Access Journals (Sweden)

Liu Defu

2016-01-01

Full Text Available An ultrasonic elliptical vibration assisted chemical mechanical polishing(UEV-CMP is employed to achieve high material removal rate and high surface quality in the finishing of hard and brittle materials such as monocrystalline silicon, which combines the functions of conventional CMP and ultrasonic machining. In theultrasonic elliptical vibration aided chemical mechanical polishingexperimental setup developed by ourselves, the workpiece attached at the end of horn can vibrate simultaneously in both horizontal and vertical directions. Polishing experiments are carried out involving monocrystalline silicon to confirm the performance of the proposed UEV-CMP. The experimental results reveal that the ultrasonic elliptical vibration can increase significantly the material removal rate and reduce dramatically the surface roughness of monocrystalline silicon. It is found that the removal rate of monocrystalline silicon polished by UEV-CMP is increased by approximately 110% relative to that of conventional CMP because a passive layer on the monocrystalline silicon surface, formed by the chemical action of the polishing slurry, will be removed not only by the mechanical action of CMP but also by ultrasonic vibration action. It indicates that the high efficiency and high quality CMP of monocrystalline silicon can be performed with the proposed UEV-CMP technique.

Problems in laser repair welding of polished surfaces

Directory of Open Access Journals (Sweden)

A. Skumavc

2014-10-01

Full Text Available This paper presents problems in laser repair welding of the tools for injection moulding of plastics and light metals. Tools for injection moulding of the car headlamps are highly polished in order to get a desirable quality of the injected part. Different light metals, glasses, elastomers, thermoplastics and thermosetting polymers are injected into the die cavity under high pressures resulting in the surface damages of the tool. Laser welding is the only suitable repair welding technique due to the very limited sputtering during deposition of the filler metal. Overlapping of the welds results in inhomogeneous hardness of the remanufactured surface. Results have shown strong correlation between hardness and surface waviness after final polishing of the repair welded surface.

Natural immunity factors in Polish mixed breed rabbits.

Science.gov (United States)

Tokarz-Deptuła, B; Niedźwiedzka-Rystwej, P; Adamiak, M; Hukowska-Szematowicz, B; Trzeciak-Ryczek, A; Deptuła, W

2015-01-01

Mixed-breed rabbits in Poland are widely used for diagnostic and scientific research and as utility animals, therefore there is a need to know their immunological status, as well as their haematological status. In this study natural immunity factors were analyzed in Polish mixed-breed rabbits and Polish mixed-breed rabbits with addition of blood of meet-breed, considering the impact of sex and season of the year (spring, summer, autumn, winter) using measurement of non-specific cellular and humoral immunity parameters in peripheral blood. The study has revealed that there is a variety between the two commonly used mixed-breed types of rabbits, especially when sex and season is concerned, which is crucial for using these animals in experiments.

Africa and Its People in the Polish Media

Directory of Open Access Journals (Sweden)

Średziński Paweł

2017-06-01

Full Text Available The African continent is treated by the Polish media marginally and usually seen through the lens of four domains of stereotypical perceptions that are associated with difficult life conditions, threats and dangers, beautiful and wild nature, as well as original and diverse cultures. Monitoring of the Polish media has become very important in this situation. That is why the results of first media monitoring report were published in 2011 by ‘Africa Another Way’ Foundation. Five years later the monitoring was repeated. It is hard to resist the impression that Africa is still viewed as this poor, underdeveloped and dangerous continent. And the way it is presented translates into the way individuals of African descent are perceived.

The effect of polishing technique on 3-D surface roughness and gloss of dental restorative resin composites.

Science.gov (United States)

Ereifej, N S; Oweis, Y G; Eliades, G

2013-01-01

The aim of this study was to compare surface roughness and gloss of resin composites polished using different polishing systems. Five resin composites were investigated: Filtek Silorane (FS), IPS Empress Direct (IP), Clearfil Majesty Posterior (CM), Premise (PM), and Estelite Sigma (ES). Twenty-five disk specimens were prepared from each material, divided into five groups, each polished with one of the following methods: Opti1Step (OS), OptiDisc (OD), Kenda CGI (KD), Pogo (PG), or metallurgical polishing (ML). Gloss and roughness parameters (Sa, Sz, Sq, and St) were evaluated by 60°-angle glossimetry and white-light interferometric profilometry. Two-way analysis of variance was used to detect differences in different materials and polishing techniques. Regression and correlation analyses were performed to examine correlations between roughness and gloss. Significant differences in roughness parameters and gloss were found according to the material, type of polishing, and material/polishing technique (pgloss was recorded for PM/ML (88.4 [2.3]) and lowest for FS/KD (30.3 [5.7]). All roughness parameters were significantly correlated with gloss (r= 0.871, 0.846, 0.713, and 0.707 for Sa, Sq, Sz, St, and gloss, respectively). It was concluded that the polishing procedure and the type of composite can have significant impacts on surface roughness and gloss of resin composites.

A novel vibration assisted polishing device based on the flexural mechanism driven by the piezoelectric actuators

Directory of Open Access Journals (Sweden)

Guilian Wang

2018-01-01

Full Text Available The vibration assisted polishing has widely application fields because of higher machining frequency and better polishing quality, especially the polishing with the non-resonant mode that is regarded as a kind of promising polishing method. This paper reports a novel vibration assisted polishing device, consisting of the flexible hinge mechanism driven by the piezoelectric actuators, which is suitable for polishing planes or curve surfaces with slow curvature. Firstly, the generation methods of vibration trajectory are investigated for the same frequency and different frequency signals’ inputs, respectively, and then the types of elliptic and Lissajous’s vibration trajectories are generated respectively. Secondly, a flexural mechanism consisting of the right circular flexible hinges and the leaf springs is developed to produce two-dimensional vibration trajectory. Statics and dynamics investigating of this flexible mechanism are finished in detail. The analytical models about input and output compliances of the flexural mechanism are established according to the matrix-based compliance modeling, and the dynamic model of the flexural mechanism based on the Euler-Lagrange equation is also presented. The finite element model of the flexural mechanism was established to carry out the numerical simulation in order to testify the rationality of device design. Finally, the polishing experiment is carried out to prove the effectiveness of the vibration device. The experimental results show that this novel vibration assisted polishing device developed in this study can remove more effectively the cutting marks left by last process and obviously reduce the workpiece surface roughness.

The population distribution near the sites of nuclear facilities in the FRG

International Nuclear Information System (INIS)

Gutschmidt, W.D.

1975-11-01

This report is a compilation of relevant data concerning population distribution near the site of nuclear installations in the Federal Republic of Germany. The 'Site Evaluation Data', a guideline approved by the Laender Committee on Nuclear Energy, is dealt with, and a classification of German nuclear sites with respect to the population distribution is presented. In addition, German and US nuclear sites are compared with the aid of the Site Population Factor, and in respect to population density values as given in WASH-1400. (orig.) [de

The Polish family under Stalinist subjugation [Rodzina w sytuacji stalinowskiego zniewolenia

Directory of Open Access Journals (Sweden)

Elwira JOLANTA KRYŃSKA

2016-06-01

Full Text Available The situation of Polish families during Stalinist subjugation was particularly arduous. The family was treated as an important part of the political system’s socialization which was not rooted at all in the sphere of traditional values and norms developed in the process of historical progress of the Polish statehood. Due to the foundations of Latin civilization based on personalization that were cherished by Polish families, cynical endeavors to take away freedom, legal capacity and personal property – the objectives which Stalinism aimed at both indirectly and directly – failed, which destroyed the communists’ plans. The family did not cease to be the most important centre of human life and development. Theoreticians of a „new deal” did not manage to limit the family to the role of a „basic social unit” of „socialist morality”.