Historical view of development of comparative endocrinology in Japan.

Science.gov (United States)

Kikuyama, Sakae; Tsutsui, Kazuyoshi

2011-04-01

This article describing a brief history of development of comparative endocrinology in Japan is contributed to the journal General and Comparative Endocrinology, in commemoration of the 50th anniversary of its publication. It covers significant works in the field of comparative endocrinology that have been done by Japanese endocrinologists, focusing those achieved during the past 70 years. The contents were arranged according to the taxonomical order of the experimental animals with which individual researchers or research groups have contributed to the acquisition of important knowledge in comparative endocrinology. Copyright © 2011 Elsevier Inc. All rights reserved.

Molecular and cellular endocrinology of the testis

International Nuclear Information System (INIS)

Stefanini, M.; Conti, M.; Geremia, R.; Ziparo, E.

1986-01-01

This volume contains the Proceedings of the IV European Workshop on Molecular and Cellular Endocrinology of the Testis held in Capri (Italy) between the 9th and 12th April 1986. The workshop was organized in several symposia related to some of the most relevant aspects of the regulation of testicular function. Main topics were the role of cell interactions, the mechanisms of signal transduction, gene expression and metabolic response of somatic cells as well as differentiation of germ cells. One session was devoted to prostaglandins in the male reproductive system and to brief discussions on interstitial fluid and on antispermatogenic compounds. In this book only the main lectures and some selected short papers are presented. (Auth.)

19th Polish Control Conference

CERN Document Server

Kacprzyk, Janusz; Oprzędkiewicz, Krzysztof; Skruch, Paweł

2017-01-01

This volume contains the proceedings of the KKA 2017 – the 19th Polish Control Conference, organized by the Department of Automatics and Biomedical Engineering, AGH University of Science and Technology in Kraków, Poland on June 18–21, 2017, under the auspices of the Committee on Automatic Control and Robotics of the Polish Academy of Sciences, and the Commission for Engineering Sciences of the Polish Academy of Arts and Sciences. Part 1 deals with general issues of modeling and control, notably flow modeling and control, sliding mode, predictive, dual, etc. control. In turn, Part 2 focuses on optimization, estimation and prediction for control. Part 3 is concerned with autonomous vehicles, while Part 4 addresses applications. Part 5 discusses computer methods in control, and Part 6 examines fractional order calculus in the modeling and control of dynamic systems. Part 7 focuses on modern robotics. Part 8 deals with modeling and identification, while Part 9 deals with problems related to security, fault ...

The Mahabharata and reproductive endocrinology

Directory of Open Access Journals (Sweden)

Bharti Kalra

2016-01-01

Full Text Available This communication approaches the Mahabharata through the prism of reproductive endocrinology. Descriptions of episodes related to reproduction are listed here, to provide fodder for the endocrinologically minded brain. The cases described here are perhaps, the first documented observations of fetal orgasm, pseudocyesis and assisted reproductive technology, including assisted insemination by donor, induction of ovulation, and in vitro fertilization as well as precocious growth and intersex. We do not presume to offer a definite explanation for these interesting episodes from the Mahabharata. We do, however, hope to stimulate interest in ancient Indian literature, and encourage a literary “forensic endocrine” analysis of events relevant to our specialty.

Polish Literature of the Holocaust. The First Instalment: 1939-1968

Directory of Open Access Journals (Sweden)

Katarzyna Kuczyńska-Koschany

2015-01-01

Full Text Available The text is a critical attempt discussing the compendium Literatura polska wobec Zagłady, (“Polish Literature in the Face of the Holocaust” edited and published by three prominent scholarly experts on the subject: Sławomir Buryła, Dorota Krawczyńska and Jacek Leociak. This is the first of the three volumes of the series Reprezentacje Zagłady w kulturze polskiej (“Representations of the Holocaust in Polish Culture” – an endeavour which is imposing already in its first instalment concerning the years 1939-1968. The time frame of the abovementioned volume is marked by the date of the beginning of World War II (1939, resulting in the Holocaust of the Jews of Europe, and a “dry pogrom”, that is was the anti-Semitic campaign in Poland in 1968 (the campaign itself and its writings shall be examined in the following volume. A comprehensive and very carefully prepared monograph has been divided into two fundamental parts: concerning the literature reacting to the Holocaust conducted by Nazi Germany during the war (1939-1945 and discussing the literary echoes of that genocide in the years 1945-1968. The study and invaluable interpretational effort have been focused on personal document literature (Marta Janczewska, Jacek Leociak, the prose (Sławomir Buryła, Dorota Krawczyńska, the poetry (Piotr Matywiecki and the press (Ewa Koźmińska-Frejlak. A separate chapter has been devoted to a the “global text”, i.e., Archiwum Ringelbluma (“Ringelblum’s Archives”. Highly appreciating the entire volume as well as its individual fragments, recalling fundamental considerations and the ones concerning details, finally, proposing small corrections and pointing to minor shortcomings, the author of the critical review suggests the use of the formula “Polish literature of the Holocaust” (analogous to the formula coined by Grzegorz Niziołek “Polish theatre of the Holocaust” as the one principally necessary to be contrasted with the

Performance test of condensate polishing system for Qinshan Nuclear Power Plant

International Nuclear Information System (INIS)

You Zhaojin; Qian Shijun; Lu Ruiting

1995-11-01

The flow chart, resin performance and water quality specifications of the condensate polishing system for Qinshan Nuclear Power Plant (QNPP) are briefly described. The initial regeneration process and the following service of the condensate polishing system are introduced. And the ability to remove corrosion products and ionic impurities of the condensate polishing system are verified during start-up, normal power operation and condenser leakage of the plant. The result shows that the performance of condensate polishing system in QNPP can completely meet the design requirements. Especially during the start-up of the unit or the leakage of the condenser, despite the inlet water quality of the polishers is far worse than the specified standard, the outlet water quality is still controlled within the indexes. Finally, several existing problems, such as 'volume ratio between resins is not optimum' and 'the inert resin and anion resin can not be stratified completely', in the condensate polishing system are also discussed. (4 refs., 1 fig., 8 tabs.)

Reproductive endocrinology and infertility fellowships: is the 'reproductive endocrinology' portion obsolete?

Science.gov (United States)

Omurtag, Kenan; Lebovic, Dan I

2015-08-01

To take inventory of the past and present and project the future direction of our field to help train the next generation of providers. Review the history of the subspecialty and factors contributing to its evolution. Reproductive endocrinology and infertility's in-vitro fertilization future is shaping the intellectual priorities and surgical skill requirements of the next generation.

Historia de la Endocrinología en Colombia

Directory of Open Access Journals (Sweden)

Alfredo Jácome Roca

2001-08-01

Full Text Available

La especialidad clínica de la endocrinología lleva ya más de medio siglo en nuestro país, y si nos ponemos a ver la actividad de algunos precursores, esta historia bien puede remontarse al siglo XIX.

El académico Antonio Ucrós Cuellar se puso en la tarea de recopilar las actuaciones de los especialistas en problemas hormonales y en las actividades de las asociaciones científicas de este ramo de la medicina y para ello contó con la ayuda editorial de los endocrinólogos y discípulos suyos, Eric Hernández y Stella Acosta.

Ucrós ha participado personalmente en el devenir histórico de la endocrinología en Colombia, como investigador de la problemática del bocio, como fundador de la Asociación Colombiana de Endocrinología y de la sección de endocrinología del Hospital de San José, que recientemente cumplió sus Bodas de Oro, y en la cual se han formado numerosos y distinguidos especialistas que ejercen en el país su profesión.

Comentar esta obra viene como anillo al dedo en este número especial sobre endocrinología que publica la revista “Medicina” de la Academia. Este libro de 230 páginas recoge en su parte inicial los antecedentes históricos y los estudios sobre el bocio en el país que el autor tan elegantemente lideró, finaliza esta parte inicial con su propia versión de la endocrinología en Colombia, que comienza con él y otros eminentes especialistas como Hernán Mendoza Hoyos, Tomás Quintero, Alonso Gutiérrez, Jaime Cortázar, Efraím tero, Mario Sánchez Medina (en el campo de la diabetes, Iván Molina en Medellín, Alberto Jamis en Barranquilla, y el importante grupo de Cali donde figuraron entre otros Eduardo Gaitán, Heins Wahner (actualmente en la Clínica Mayo, William Jubiz y Matilde de Bernal, todos de talla internacional.

Mi interés por la endocrinología se inició con las magistrales clases de Mendoza Hoyos en la Javeriana, sobre el tema de la Fisiología Endocrina

Microbial endocrinology and the microbiota-gut-brain axis.

Science.gov (United States)

Lyte, Mark

2014-01-01

Microbial endocrinology is defined as the study of the ability of microorganisms to both produce and recognize neurochemicals that originate either within the microorganisms themselves or within the host they inhabit. As such, microbial endocrinology represents the intersection of the fields of microbiology and neurobiology. The acquisition of neurochemical-based cell-to-cell signaling mechanisms in eukaryotic organisms is believed to have been acquired due to late horizontal gene transfer from prokaryotic microorganisms. When considered in the context of the microbiota's ability to influence host behavior, microbial endocrinology with its theoretical basis rooted in shared neuroendocrine signaling mechanisms provides for testable experiments with which to understand the role of the microbiota in host behavior and as importantly the ability of the host to influence the microbiota through neuroendocrine-based mechanisms.

Polish-Bulgarian-Russian, Bulgarian-Polish-Russian or Russian-Bulgarian-Polish dictionary?

Directory of Open Access Journals (Sweden)

Violetta Koseska-Toszewa

2015-11-01

Full Text Available Polish-Bulgarian-Russian, Bulgarian-Polish-Russian or Russian-Bulgarian-Polish dictionary? The trilingual dictionary (M. Duszkin, V. Koseska, J. Satoła and A. Tzoneva is being elaborated based on a working Polish-Bulgarian-Russian electronic parallel corpus authored by Maksim Duszkin, Violetta Koseska-Toszewa and Joanna Satoła-Staśkowiak, and works by A. Tzoneva. It is the first corpus comparing languages belonging to three different Slavic language groups: western, southern and eastern. Works on the dictionary are based on Gramatyka konfrontatywna bułgarsko-polska (Bulgarian-Polish confrontative grammar and the proposed there semantic-oriented interlanguage. Two types of classifiers have been introduced into the dictionary: classic and semantic. The trilingual dictionary will present a consistent and homogeneous set of facts of grammar and semantics. The Authors point out that in a traditional dictionary it is not clear for example whether aspect should be understood as imperfective / perfective form of a verb or as its meaning. Therefore in the dictionary forms and meaning are separated in a regular way. Imperfective verb form has two meanings: state and configuration of states and events culminating in state. Also perfective verb form has two meanings: event and configuration of states and events culminating in event. These meanings are described by the semantic classifiers, respectively, state and event, state1 and event1. The way of describing language units, mentioned in the article, gives a possibility to present language material (Polish, Bulgarian, Russian in any required order, hence the article’s title.

[Bogdan Suchodolski--initiator and editor-in-chief of the publication History of Polish Science].

Science.gov (United States)

Kuźnicka, Barbara; Kuźnicki, Leszek

2011-01-01

Among numerous and distinguished author's and editorial works of Bogdan Suchodolski a particular value presents a publication in eight volumes entitled 'History of Polish Science' (including two biographical and bibliographic volumes), which was published in the years 1970-1992 on Professor's own initiative and edited by himself. This is the first synthesis of the history of science in Poland, from the beginning of the Middle Ages till the present time (to 1952). In the conception of the initiator and editor the work presents the development of scientific thought and achievements of the scholars in relation to national culture and in connexions with the trends in science in the world. 'History of Polish Science' is the work written by several dozen authors, representing different domains of the knowledge. Scientific, organizational and editorial patronate was possible by dint of History of Science and Technology Establishment of Polish Academy of Sciences (presently the Institute for the History of Science of Polish Academy of Sciences), which was managed by Bogdan Suchodolski.

An interactive E-Learning portal in pediatric endocrinology : Practical experience

NARCIS (Netherlands)

Kranenburg-van Koppen, L.J.C.; Grijpink-van den Biggelaar, K.; Drop, S.L.S.

2013-01-01

Based on educational considerations, the European Society for Paediatric Endocrinology (ESPE) e-learning portal has been developed, providing an interactive learning environment for up-to-date information in pediatric endocrinology. From March 2011 to January 2012, five small-scale pilot studies

Transgender Health in Endocrinology: Current Status of Endocrinology Fellowship Programs and Practicing Clinicians.

Science.gov (United States)

Davidge-Pitts, Caroline; Nippoldt, Todd B; Danoff, Ann; Radziejewski, Lauren; Natt, Neena

2017-04-01

The transgender population continues to face challenges in accessing appropriate health care. Adequate training of endocrinologists in this area is a priority. Assess the status of transgender health care education in US endocrinology fellowship training programs and assess knowledge and practice of transgender health among practicing US endocrinologists. Mayo Clinic and the Endocrine Society developed and administered a Web-based anonymous survey to 104 endocrinology fellowship program directors (PDs; members of the Association of Program Directors in Endocrinology, Diabetes and Metabolism) and 6992 US medical doctor members of Endocrine Society. There were 54 total responses from 104 PDs (51.9%). Thirty-five of these 54 programs (72.2%) provide teaching on transgender health topics; however, 93.8% respondents indicated that fellowship training in this area is important. Barriers to provision of education included lack of faculty interest or experience. The most desired strategies to increase transgender-specific content included online training modules for trainees and faculty. Of 411 practicing clinician responders, almost 80% have treated a transgender patient, but 80.6% have never received training on care of transgender patients. Clinicians were very or somewhat confident in terms of definitions (77.1%), taking a history (63.3%), and prescribing hormones (64.8%); however, low confidence was reported outside of the hormonal realm. The most requested methods of education included online training modules and presentation of transgender topics at meetings. Confidence and competence in transgender health needs to increase among endocrinologists. Strategies include the development of online training modules, expansion of formal transgender curricula in fellowship programs, and presentations at national and international meetings. Copyright © 2017 by the Endocrine Society

Development of the Clinic of Endocrinology, diabetes and metabolic disorders.

Science.gov (United States)

Shubeska Stratrova, S

2013-01-01

The Clinic of Endocrinology, diabetes and metabolic disorders was founded in 1975 by Prof d-r Alexandar Plashevski. Healthcare, educational and scientific activities in the Clinic of Endocrinology are performed in its departments. The Department for hospitalized diabetic and endocrine patients consists of the metabolic and endocrine intensive care unit, the department for diagnosis and treatment of diabetics and endocrine patients, day hospital, the department for education of diabetic patients, and the national center for insulin pump therapy. The Center for Diabetes was established in 1972 by Prof d-r Dimitar Arsov. In 1975, Prof d-r Alexandar Plasheski broadened the activities of the Center for Diabetes. It was dislocated in 1980, with new accommodation outside the clinic. Since then the Center has consisted of several organized units: two specialist outpatient clinics for diabetic patients, biochemical and endocrine laboratory, sub-departments for: diabetic foot, cardiovascular diagnosis, ophthalmology, and urgent interventions. The Department of Endocrinology and Metabolic Disorders for outclinic endocrine patients was established in 1980, and it integrates the following sub-departments: thyrology, andrology, reproductive endocrinology, obesity and lipid disorders and sub-department for osteoporosis. The educational staff of the Clinic of Endocrinology organizes theoretical and practical education about Clinical Investigation and Internal Medicine with credit transfer system course of study of the Medical Faculty, Faculty of Stomatology, postgraduate studies, specializations and sub-specializations. Symposiums, 3 congresses, schools for diabetes and osteoporosis and continuous medical education were also organized. The Clinic of Endocrinology was initiator, organizer, founder and the seat of several medical associations.

Microbial Endocrinology in the Pathogenesis of Infectious Disease.

Science.gov (United States)

Lyte, Mark

2016-04-01

Microbial endocrinology represents the intersection of two seemingly disparate fields, microbiology and neurobiology, and is based on the shared presence of neurochemicals that are exactly the same in host as well as in the microorganism. The ability of microorganisms to not only respond to, but also produce, many of the same neurochemicals that are produced by the host, such as during periods of stress, has led to the introduction of this evolutionary-based mechanism which has a role in the pathogenesis of infectious disease. The consideration of microbial endocrinology-based mechanisms has demonstrated, for example, that the prevalent use of catecholamine-based synthetic drugs in the clinical setting contributes to the formation of biofilms in indwelling medical devices. Production of neurochemicals by microorganisms most often employs the same biosynthetic pathways as those utilized by the host, indicating that acquisition of host neurochemical-based signaling system in the host may have been acquired due to lateral gene transfer from microorganisms. That both host and microorganism produce and respond to the very same neurochemicals means that there is bidirectionality contained with the theoretical underpinnings of microbial endocrinology. This can be seen in the role of microbial endocrinology in the microbiota-gut-brain axis and its relevance to infectious disease. Such shared pathways argue for a role of microorganism-neurochemical interactions in infectious disease.

The future endocrine patient. Reflections on the future of clinical endocrinology

NARCIS (Netherlands)

S.W.J. Lamberts (Steven); J.A. Romijn (Johannes); W.M. Wiersinga (Wilmar)

2003-01-01

textabstractIn recent years the future position of clinical endocrinology has been extensively discussed by Western European endocrine societies. Clinical endocrinology seems to suffer from being too intellectual, generating too little income, and lacking too few spectacular

The future endocrine patient. Reflections on the future of clinical endocrinology

NARCIS (Netherlands)

Lamberts, S. W. J.; Romijn, J. A.; Wiersinga, W. M.

2003-01-01

In recent years the future position of clinical endocrinology has been extensively discussed by Western European endocrine societies. Clinical endocrinology seems to suffer from being too intellectual, generating too little income, and lacking too few spectacular interventions. In this manuscript we

The study of optimization on process parameters of high-accuracy computerized numerical control polishing

Science.gov (United States)

Huang, Wei-Ren; Huang, Shih-Pu; Tsai, Tsung-Yueh; Lin, Yi-Jyun; Yu, Zong-Ru; Kuo, Ching-Hsiang; Hsu, Wei-Yao; Young, Hong-Tsu

2017-09-01

Spherical lenses lead to forming spherical aberration and reduced optical performance. Consequently, in practice optical system shall apply a combination of spherical lenses for aberration correction. Thus, the volume of the optical system increased. In modern optical systems, aspherical lenses have been widely used because of their high optical performance with less optical components. However, aspherical surfaces cannot be fabricated by traditional full aperture polishing process due to their varying curvature. Sub-aperture computer numerical control (CNC) polishing is adopted for aspherical surface fabrication in recent years. By using CNC polishing process, mid-spatial frequency (MSF) error is normally accompanied during this process. And the MSF surface texture of optics decreases the optical performance for high precision optical system, especially for short-wavelength applications. Based on a bonnet polishing CNC machine, this study focuses on the relationship between MSF surface texture and CNC polishing parameters, which include feed rate, head speed, track spacing and path direction. The power spectral density (PSD) analysis is used to judge the MSF level caused by those polishing parameters. The test results show that controlling the removal depth of single polishing path, through the feed rate, and without same direction polishing path for higher total removal depth can efficiently reduce the MSF error. To verify the optical polishing parameters, we divided a correction polishing process to several polishing runs with different direction polishing paths. Compare to one shot polishing run, multi-direction path polishing plan could produce better surface quality on the optics.

Current situation of hospital-based endocrinology and clinical nutrition in Spain.

Science.gov (United States)

Angeles Gálvez Moreno, M

2008-01-01

In 2006, the Healthcare Commission of Spanish Society of Endocrinology and Nutrition did a survey in order to know the actual situation of endocrinology and clinical nutrition healthcare in Public Sanitary Systems in Spain. The survey has been more extensive than the last and it has taken up number and geographical distribution of specialists in Spain in addition to data about clinical assistance. The mean of public hospitals with endocrinologist participation has been 50%. Copyright © 2008 Sociedad Española de Endocrinología y Nutrición. Published by Elsevier Espana. All rights reserved.

Radiation endocrinology as science and its tasks in Republic Kazakhstan

International Nuclear Information System (INIS)

Abylaev, Zh.A.

1997-01-01

It is known, that radiation endocrinology as science was formed comparatively not long ago and it is developing at the turn of endocrinology, medical radiology, radiobiology and immunology. Tasks of clinic radiation endocrinology for scientists of Kazakhstan are related with following problems: - radiation effects in condition of Semipalatinsk test site (Semipalatinsk, Karaganda, Pavlodar, East-Kazakhstan regions); - with definition of radiation factors (related with nuclear explosions) in ecologic systems for solution of national problems; - with contamination of Kazakhstan territory, associated with industrial radioactive materials handling ; - with goiter enemy in districts with unfavorable radiation situation; - with mass character of injuries of both the radiation exposure and the iodine deficit on territory of Republic. It was emphasised, that there is principle problem of population rehabilitation through systems of mass measures including prevention of endocrine complication in late time

Reproductive endocrinology of vitamin D.

Science.gov (United States)

Lorenzen, Mette; Boisen, Ida Marie; Mortensen, Li Juel; Lanske, Beate; Juul, Anders; Blomberg Jensen, Martin

2017-09-15

Vitamin D is a versatile hormone with several functions beyond its well-established role in maintenance of skeletal health and calcium homeostasis. The effects of vitamin D are mediated by the vitamin D receptor, which is expressed together with the vitamin D metabolizing enzymes in the reproductive tissues. The reproductive organs are therefore responsive to and able to metabolize vitamin D locally. The exact role remains to be clarified but several studies have suggested a link between vitamin D and production/release of reproductive hormones into circulation, which will be the main focus of this review. Current evidence is primarily based on small human association studies and rodent models. This highlights the need for randomized clinical trials, but also functional animal and human in vitro studies, and larger, prospective cohort studies are warranted. Given the high number of men and women suffering from reproductive problems and abnormal endocrinology research addressing the role of vitamin D in reproductive endocrinology may be of clinical importance. Copyright © 2017 Elsevier B.V. All rights reserved.

[Services portfolio of a department of endocrinology and clinical nutrition].

Science.gov (United States)

Vicente Delgado, Almudena; Gómez Enterría, Pilar; Tinahones Madueño, Francisco

2011-03-01

Endocrinology and Clinical Nutrition are branches of Medicine that deal with the study of physiology of body glands and hormones and their disorders, intermediate metabolism of nutrients, enteral and parenteral nutrition, promotion of health by prevention of diet-related diseases, and appropriate use of the diagnostic, therapeutic, and preventive tools related to these disciplines. Development of Endocrinology and Clinical Nutrition support services requires accurate definition and management of a number of complex resources, both human and material, as well as adequate planning of the care provided. It is therefore essential to know the services portfolio of an ideal Department of Endocrinology and Clinical Nutrition because this is a useful, valid and necessary tool to optimize the available resources, to increase efficiency, and to improve the quality of care. Copyright © 2010 SEEN. Published by Elsevier Espana. All rights reserved.

Create new research directions in comparative endocrinology from Asia and Oceania.

Science.gov (United States)

Tsutsui, Kazuyoshi

2013-01-15

The Asia and Oceania Society for Comparative Endocrinology (AOSCE) was founded in 1987, when the first congress was held in Nagoya, Japan. The purpose of the AOSCE is to progress scientific activities in the field of comparative endocrinology in Asia and Oceania and to establish a deep relationship among the members. For this purpose, the AOSCE holds a congress or an intercongress symposium every 2 years, which organizes an attractive scientific program covering the latest progress in the broad aspect of comparative endocrinology. 2012 was the 25th anniversary of AOSCE. Our scientific activities have increased dramatically during the past 25 years. The 7th AOSCE congress was held in Kuala Lumpur, Malaysia in 2012. The theme of this congress was "Overcoming challenges in the 21st century". To overcome challenges in the 21st century, we further need to create new research directions in comparative endocrinology from Asia and Oceania. This paper describes a brief history of the AOSCE and also highlights the discovery of gonadotropin-inhibitory hormone (GnIH) and the progress of GnIH research as one of new research directions in comparative endocrinology. In 2000, GnIH was discovered in Japan and now more than 50 laboratories are working on GnIH in the world. The discovery of GnIH has changed our understanding about regulation of the reproductive axis drastically in the past decade. Copyright © 2012 Elsevier Inc. All rights reserved.

Cancer morbidity among polishers.

Science.gov (United States)

Järvholm, B; Thiringer, G; Axelson, O

1982-01-01

The mortality pattern among 86 men was determined to investigate the possible hazards of polishing steel. The men had polished steel with polishing paste for at least five years. The polishing pastes had contained tallow, beeswax, carnauba wax, alundum, carborundum, ferric oxide, and chalk. A total of 18 men had died compared with 13.3 expected. Four had died of stomach cancer compared with 0.44 expected (p less than 0.005). The mortality for other causes of death was not increased. The study does not permit any definite conclusion but indicates a possible cancer hazard among polishers. PMID:7066237

Endocrinology in the Ramayana

Directory of Open Access Journals (Sweden)

Sanjay Kalra

2016-01-01

Full Text Available This article is one of a series of publications which highlight the possible endocrine conditions and interventions listed in the ancient texts. This compendium lists episodes from the Indian epic Ramayana and from the associated genealogy of Lord Rama′s dynasty, the Suryavanshis. These episodes are chosen for their relevance to endocrinology and are listed in a gland-based order. It is hoped that this communication will encourage further work on endocrine literary forensics.

Polishing large NaCl windows on a continuous polisher

International Nuclear Information System (INIS)

Williamson, R.

1979-01-01

The Helios and Antares CO 2 fusion laser systems incorporate numerous large sodium chloride windows. These must be refinished periodically, making necessary a consistent and predictable polishing capability. A continuous polisher (or annular lap) which might at Kirtland's Developmental Optical Facility. Large NaCl windows had not been polished on this type of machine. The machine has proven itself capable of producing lambda/16 figures at 633 nm (HeNe) with extremely smooth surfaces on glass. Since then, we have been working exclusively on NaCl optics. Due to different polishing parameters between NaCl and glass, and the slight solubility of the pitch in the slurry, this phase presents new problems. The work on glass will be reviewed. Results on NaCl to date will be reported. The potential of this type of machine relative to prisms, thin and irregularly shaped optics will be discussed

TRANSFER FROM PEDIATRIC TO ADULT ENDOCRINOLOGY.

Science.gov (United States)

Jones, Marybeth R; Robbins, Brett W; Augustine, Marilyn; Doyle, Jackie; Mack-Fogg, Jean; Jones, Heather; White, Patience H

2017-07-01

Adult and pediatric endocrinologists share responsibility for the transition of youth with type 1 diabetes from pediatric to adult healthcare. This study aimed to increase successful transfers to adult care in subspecialty practices by establishing a systematic health care transition (HCT) process. Providers from the adult and pediatric endocrinology divisions at the University of Rochester Medical Center met monthly to customize and integrate the Six Core Elements (6CEs) of HCT into clinical workflows. Young adult patients with type 1 diabetes having an outpatient visit during a 34-month pre-post intervention period were eligible (N = 371). Retrospective chart review was performed on patients receiving referrals to adult endocrinology (n = 75) to obtain (1) the proportion of patients explicitly tracked during transfer from the pediatric to adult endocrinology practice, (2) the providers' documentation of the use of the 6CEs, and (3) the patients' diabetes control and healthcare utilization during the transition period. The percent of eligible patients with type 1 diabetes who were explicitly tracked in their transfer more than doubled compared to baseline (11% vs. 27% of eligible patients; P<.01). Pediatric providers started to use transition readiness assessments and create medical summaries, and adult providers increased closed-loop communication with pediatric providers after a patient's first adult visit. Glycemic control and healthcare utilization remained stable. Successful implementation of the 6CEs into pediatric and adult subspecialty practices can result in improvements of planned transfers of pediatric patients with type 1 diabetes to adult subspecialty providers. 6CEs = six core elements; AYA = adolescent and young adult; DKA = diabetic ketoacidosis; ED = emergency department; HbA1c = hemoglobin A1c; HCT = health care transition.

Convergent Polishing: A Simple, Rapid, Full Aperture Polishing Process of High Quality Optical Flats & Spheres

Science.gov (United States)

Suratwala, Tayyab; Steele, Rusty; Feit, Michael; Dylla-Spears, Rebecca; Desjardin, Richard; Mason, Dan; Wong, Lana; Geraghty, Paul; Miller, Phil; Shen, Nan

2014-01-01

Convergent Polishing is a novel polishing system and method for finishing flat and spherical glass optics in which a workpiece, independent of its initial shape (i.e., surface figure), will converge to final surface figure with excellent surface quality under a fixed, unchanging set of polishing parameters in a single polishing iteration. In contrast, conventional full aperture polishing methods require multiple, often long, iterative cycles involving polishing, metrology and process changes to achieve the desired surface figure. The Convergent Polishing process is based on the concept of workpiece-lap height mismatch resulting in pressure differential that decreases with removal and results in the workpiece converging to the shape of the lap. The successful implementation of the Convergent Polishing process is a result of the combination of a number of technologies to remove all sources of non-uniform spatial material removal (except for workpiece-lap mismatch) for surface figure convergence and to reduce the number of rogue particles in the system for low scratch densities and low roughness. The Convergent Polishing process has been demonstrated for the fabrication of both flats and spheres of various shapes, sizes, and aspect ratios on various glass materials. The practical impact is that high quality optical components can be fabricated more rapidly, more repeatedly, with less metrology, and with less labor, resulting in lower unit costs. In this study, the Convergent Polishing protocol is specifically described for fabricating 26.5 cm square fused silica flats from a fine ground surface to a polished ~λ/2 surface figure after polishing 4 hr per surface on a 81 cm diameter polisher. PMID:25489745

Volume Regulated Channels

DEFF Research Database (Denmark)

Klausen, Thomas Kjær

of volume perturbations evolution have developed system of channels and transporters to tightly control volume homeostasis. In the past decades evidence has been mounting, that the importance of these volume regulated channels and transporters are not restricted to the defense of cellular volume...... but are also essential for a number of physiological processes such as proliferation, controlled cell death, migration and endocrinology. The thesis have been focusing on two Channels, namely the swelling activated Cl- channel (ICl, swell) and the transient receptor potential Vanilloid (TRPV4) channel. I: Cl......- serves a multitude of functions in the mammalian cell, regulating the membrane potential (Em), cell volume, protein activity and the driving force for facilitated transporters giving Cl- and Cl- channels a major potential of regulating cellular function. These functions include control of the cell cycle...

Functional Median Polish

KAUST Repository

Sun, Ying

2012-08-03

This article proposes functional median polish, an extension of univariate median polish, for one-way and two-way functional analysis of variance (ANOVA). The functional median polish estimates the functional grand effect and functional main factor effects based on functional medians in an additive functional ANOVA model assuming no interaction among factors. A functional rank test is used to assess whether the functional main factor effects are significant. The robustness of the functional median polish is demonstrated by comparing its performance with the traditional functional ANOVA fitted by means under different outlier models in simulation studies. The functional median polish is illustrated on various applications in climate science, including one-way and two-way ANOVA when functional data are either curves or images. Specifically, Canadian temperature data, U. S. precipitation observations and outputs of global and regional climate models are considered, which can facilitate the research on the close link between local climate and the occurrence or severity of some diseases and other threats to human health. © 2012 International Biometric Society.

Reproductive endocrinology of llamas and alpacas.

Science.gov (United States)

Bravo, P W

1994-07-01

The physiology of reproduction with emphasis in endocrinology of llamas and alpacas is addressed. Basic concepts of ovarian follicular dynamics, endocrine events associated with induction of ovulation, corpus luteum formation, pregnancy, parturition, postpartum interval, puberty, and sexual behavior on the female are reviewed. Pathologic conditions of the reproductive process are also reviewed.

Perceptions about Training during Endocrinology Residency Programs in India over the Years: A Cross-sectional Study (PEER India Study)

Science.gov (United States)

Khandelwal, Deepak; Dutta, Deep; Singla, Rajiv; Surana, Vineet; Aggarwal, Sameer; Gupta, Yashdeep; Kalra, Sanjay; Khadgawat, Rajesh; Tandon, Nikhil

2017-01-01

Background: Residents' perception on quality of endocrinology training in India is not known. This study aimed to evaluate the perceptions about endocrinology residency programs in India among current trainees as compared to practicing endocrinologists. Methods: Trainees attending a preconference workshop at the annual conference of Endocrine Society of India (ESI) were given a questionnaire designed to evaluate their perceptions on their training. These evaluated the reasons for choosing endocrinology, their experiences during residency, and career plans. Practicing endocrinologists attending ESICON with at least 5-year experience were evaluated as controls. Results: Questionnaires from 63 endocrine trainees and 78 practicing endocrinologists were analyzed. Endocrinology is perceived to be the super-specialty with the best quality of life (QOL) but fair with regard to financial remuneration. Among current trainees, 61.89%, 31.74%, and 34.91% are satisfied with training in clinical endocrinology, laboratory endocrinology, and clinical/translational research, respectively. The corresponding figures for practicing endocrinologists are 71.78%, 25.63%, and 30.75%, respectively. Exposure to national endocrinology conferences during their endocrinology residency was adequate. However, exposure to international endocrinology conferences, research publications, project writing, and grant application are limited. Laboratory endocrinology is rated as the most neglected aspect during endocrine residency. Most of the trainees want to establish their own clinical practice in the long run. Very few trainees (17.46%) wish to join the medical education services. Conclusion: There is a good perception of QOL in endocrinology in spite of average financial remuneration. There is dissatisfaction with the quality of training in laboratory endocrinology and clinical research. Very few endocrine trainees consider academics as a long-term career option in India. PMID:28459024

Functional Median Polish

KAUST Repository

Sun, Ying; Genton, Marc G.

2012-01-01

polish is demonstrated by comparing its performance with the traditional functional ANOVA fitted by means under different outlier models in simulation studies. The functional median polish is illustrated on various applications in climate science

Ion beam polishing for three-dimensional electron backscattered diffraction

DEFF Research Database (Denmark)

Saowadee, Nath; Agersted, Karsten; Ubhi, H.S.

2013-01-01

averaging and/or poor 3D-EBSD data quality. In this work a low kV focused ion beam was successfully implemented to automatically polish surfaces during 3D-EBSD of La- and Nb-doped strontium titanate of volume 12.6 × 12.6 × 3.0 μm. The key to achieving this technique is the combination of a defocused low k...

Worldwide research productivity in the field of endocrinology and metabolism--a bibliometric analysis.

Science.gov (United States)

Zhao, Xiyan; Ye, Ru; Zhao, Linhua; Lin, Yiqun; Huang, Wenjing; He, Xinhui; Lian, Fengmei; Tong, Xiaolin

2015-01-01

Recently, significant contributions to the study of endocrinology and metabolism have been made. The national contribution, however, has not been reported. The aim of this study was to assess national efforts in the field of endocrinology and metabolism. A Web of Science search was performed using subject categories "endocrinology & metabolism" to identify articles published from 2010 to 2014. The total and per capita numbers of articles and citations were analysed for different countries. A total of 79,394 articles were published on endocrinology and metabolism from 2010 to 2014. Most were published in North America, East Asia, and Europe. The majority (82.28%) were reported by authors in high-income countries, 17.64% were published in middle-income countries, and only 0.08% were published in low-income countries. Authors in the United States published the most articles (27.38%), followed by China (7.22%), Italy (5.70%), the United Kingdom (5.6%), and Japan (5.54%). Articles published by authors in the United States had the most citations (260,934). A positive correlation was found between the number of publications and population/gross domestic product (GDP; p endocrinology and metabolism articles were published by authors from high-income countries with few from low-income countries. The United States was the most productive country. However, when population size and GDP were considered, some European countries were ranked higher.

Health Information in Polish (polski)

Science.gov (United States)

... Tools You Are Here: Home → Multiple Languages → Polish (polski) URL of this page: https://medlineplus.gov/languages/polish.html Health Information in Polish (polski) To use the sharing features on this page, ...

Trends in endocrinology related research articles in a medical journal from India

Science.gov (United States)

Kumar, K. V. S. H; Aravinda, Konidena

2012-01-01

Background: The details about the research productivity in the specialty of endocrinology from India is lacking. We plan to assess the publishing trends and the research productivity of Endocrinology related research articles published in the Journal of the Association of Physicians of India (JAPI). Materials and Methods: We carried the bibliometric analysis of endocrinology related articles from JAPI. The data were obtained from the JAPI website for the publications between 2000 and 2011. The articles were analyzed for the type (original article, case reports, correspondence, and pictorial image), subspecialty (diabetes, thyroid, etc.), and place of the research. Data were presented with descriptive statistics in numbers and percentages. Results: Out of a total 2977 articles published by JAPI, 312 articles belong to endocrine subspecialty. Endocrinology related articles constitute about 11.2%–23.2% of the published articles per year in JAPI and the percentage is increasing every year. Original articles (52%) and case reports (27%) constituite the majority, while the rest were letters to editor (9%) and pictorial images (12%). Diabetes (57%) and metabolic bone disorders (16%) lead the subspecialty articles, followed by thyroid (9%), adrenal and gonad (8%), and pituitary (8%). Chennai (20%), Mumbai (14%), and Delhi (9%) are the top 3 places contributing to the articles followed by Chandigarh and Varanasi. Conclusion: Majority of endocrinology related research productivity is seen in form of original articles and case reports. Diabetes is the leading disease with maximum research articles from Chennai and other glands are equally represented in the research productivity. PMID:23226637

Trends in endocrinology related research articles in a medical journal from India

Directory of Open Access Journals (Sweden)

K. V. S. Hari Kumar

2012-01-01

Full Text Available Background: The details about the research productivity in the specialty of endocrinology from India is lacking. We plan to assess the publishing trends and the research productivity of Endocrinology related research articles published in the Journal of the Association of Physicians of India (JAPI. Materials and Methods: We carried the bibliometric analysis of endocrinology related articles from JAPI. The data were obtained from the JAPI website for the publications between 2000 and 2011. The articles were analyzed for the type (original article, case reports, correspondence, and pictorial image, subspecialty (diabetes, thyroid, etc., and place of the research. Data were presented with descriptive statistics in numbers and percentages. Results: Out of a total 2977 articles published by JAPI, 312 articles belong to endocrine subspecialty. Endocrinology related articles constitute about 11.2%-23.2% of the published articles per year in JAPI and the percentage is increasing every year. Original articles (52% and case reports (27% constituite the majority, while the rest were letters to editor (9% and pictorial images (12%. Diabetes (57% and metabolic bone disorders (16% lead the subspecialty articles, followed by thyroid (9%, adrenal and gonad (8%, and pituitary (8%. Chennai (20%, Mumbai (14%, and Delhi (9% are the top 3 places contributing to the articles followed by Chandigarh and Varanasi. Conclusion: Majority of endocrinology related research productivity is seen in form of original articles and case reports. Diabetes is the leading disease with maximum research articles from Chennai and other glands are equally represented in the research productivity.

Empirical relations of sediment transport prediction in Polish multibanks shore

International Nuclear Information System (INIS)

Pruszak, Z.

1995-01-01

Qualitative and quantitative description of various elements of bottom sediment movement in Polish multibanks coastal region has been down. Empirical relations linking transport velocity, thickness of the drag layer and the transport volume with the generating wave-current background have been presented. Practical engineering advices on performance of various reports concerning coastal engineering or coastal zone ecology. (author)

Polycystic ovary syndrome | Maharaj | Journal of Endocrinology ...

African Journals Online (AJOL)

Polycystic ovary syndrome. ... Journal of Endocrinology, Metabolism and Diabetes of South Africa ... the disorder, that we now know as the polycystic ovary (or ovarian) syndrome (PCOS), in seven women with amenorrhoea, enlarged ovaries with multiple cysts and hirsutism.2 These patients were treated with ovarian wedge ...

The use of noninvasive and minimally invasive methods in endocrinology for threatened mammalian species conservation.

Science.gov (United States)

Kersey, David C; Dehnhard, Martin

2014-07-01

Endocrinology is an indispensable tool in threatened species research. The study of endocrinology in threatened species not only advances knowledge of endocrine mechanism but also contributes to conservation efforts of studied species. To this end, endocrinology has been traditionally used to understand reproductive and adrenocortical endocrine axes by quantifying excreted steroid metabolites. From these studies a large body of knowledge was created that contributed to the field of endocrinology, aided conservation efforts, and created a template by which to validate and conduct this research for other species. In this regard noninvasive hormone monitoring has become a favored approach to study the basic endocrinology of wildlife species. Due to the increased understanding of endocrine physiology of threatened species, breeding rates of captive population have improved to levels allowing for reintroduction of species to restored natural ecosystems. Although these approaches are still employed, advances in biochemical, molecular, and genomic technologies are providing inroads to describe lesser known endocrine activity in threatened species. These new avenues of research will allow for growth of the field with greater depth and breadth. However, for all approaches to endocrinology, limitations on resources and access to animals will require innovation of current methodologies to permit broad application for use in threatened species research. Crown Copyright © 2014. Published by Elsevier Inc. All rights reserved.

Polish Cartographical Review

Directory of Open Access Journals (Sweden)

Nedjeljko Frančula

2017-07-01

Full Text Available The Polish Cartographical Review (PCR journal has been published in English four times a year since 2015. The journal is in open access and it is published by De Gruyter Open. It is edited by Polish scientists in collaboration with international experts.

[Endocrinology in Portugal - Census 2016. Board of the Portuguese College of Endocrinology and Nutrition of the Portuguese Medical Association].

Science.gov (United States)

Guimarães, Joana; Afonso, António; Carvalho, Davide; Marques, Ana Paula; Martins, Teresa; Mascarenhas, Mário Rui; Pereira, Conceição; Rodrigues, Dírcea; Saraiva, Catarina; Cardoso, Helena

2017-09-29

On September 2016, the Board of the College of Endocrinology and Nutrition of the Portuguese Medical Association carried out a national survey, about all Endocrinology, Diabetes and Metabolism Departments of the public hospitals included in the Portuguese National Health Service and a simplified version of this survey was sent to all endocrinologists working in Portugal and registered with the Portuguese Medical Association. Data related to organizational and human resources were collected, reporting the situation by the end of year 2015. The census registered 107 individuals and 27 Departments. The ratio of endocrinologists-population was 1.4, much lower than in the other European countries (varies between 2 to 4), resulting in alarming shortages of services in some areas of Portugal and in worse quality indicators. These data suggest that actions should be taken to increase the number of endocrinologists and departments in the country. In recent years, the number of residents has significantly increased, which will make it possible to correct this situation.

Polish-German bilingualism at school. A Polish perspective

Directory of Open Access Journals (Sweden)

Pulaczewska, Hanna

2014-03-01

Full Text Available This article presents the institutional frames for the acquisition of Polish literacy skills in Germany and the maintenance of Polish-German bilingualism after the repatriation of bilingual children to Poland. These processes are examined in the context of recent developments in the European domestic job market. While the European Union has placed proficiency in several languages among its educational objectives, and foreign languages have been made obligatory school subjects in all member countries, the potential advantages of internal European migrations for producing high-proficiency bilinguals are being ignored. Bilingualism resulting from migration and biculturalism enjoys little social prestige in the host countries. In Germany, there is significant regional variation in how school authorities react to challenges posed by the presence of minority languages. In many cases, the linguistic potential of many second-generation migrants and re-emigrants gets largely wasted because of lacking interest and incentives from German and Polish institutions alike.

Bariatric Endocrinology: Principles of Medical Practice

Science.gov (United States)

Gonzalez-Campoy, J. Michael; Richardson, Bruce; Gonzalez-Cameron, David; Ebrahim, Ayesha; Strobel, Pamela; Martinez, Tiphani; Blaha, Beth; Ransom, Maria; Quinonez-Weislow, Jessica; Pierson, Andrea; Gonzalez Ahumada, Miguel

2014-01-01

Obesity, is a chronic, biological, preventable, and treatable disease. The accumulation of fat mass causes physical changes (adiposity), metabolic and hormonal changes due to adipose tissue dysfunction (adiposopathy), and psychological changes. Bariatric endocrinology was conceived from the need to address the neuro-endocrinological derangements that are associated with adiposopathy, and from the need to broaden the scope of the management of its complications. In addition to the well-established metabolic complications of overweight and obesity, adiposopathy leads to hyperinsulinemia, hyperleptinemia, hypoadiponectinemia, dysregulation of gut peptides including GLP-1 and ghrelin, the development of an inflammatory milieu, and the strong risk of vascular disease. Therapy for adiposopathy hinges on effectively lowering the ratio of orexigenic to anorexigenic signals reaching the the hypothalamus and other relevant brain regions, favoring a lower caloric intake. Adiposopathy, overweight and obesity should be treated indefinitely with the specific aims to reduce fat mass for the adiposity complications, and to normalize adipose tissue function for the adiposopathic complications. This paper defines the principles of medical practice in bariatric endocrinology—the treatment of overweight and obesity as means to treat adiposopathy and its accompanying metabolic and hormonal derangements. PMID:24899894

Journal of Endocrinology, Metabolism and Diabetes of South Africa

African Journals Online (AJOL)

JEMDSA) is published by the South African Medical Association and publishes papers related to endocrinology, metabolism and diabetes. Other websites related to this journal: http://www.jemdsa.co.za ...

Polish Academy of Sciences Great Dictionary of Polish [Wielki słownik języka polskiego PAN

Directory of Open Access Journals (Sweden)

Piotr Žmigrodzki

2014-12-01

Full Text Available The paper describes a lexicographical project involving the development of the newest general dictionary of the Polish language: the Polish Academy of Sciences Great Dictionary of Polish [Wielki słownik języka polskiego PAN]. The project is coordinated by the Institute of Polish Language at the Polish Academy of Sciences and carried out in collaboration with linguists and lexicographers from several other Polish academic centres. The paper offers a brief description of the genesis of the project and the scope of information included in the dictionary, the organisation of work, the life of the dictionary on the Web as well as the plans for the future.

Polish Higher Education: Intersectoral Distinctiveness

Science.gov (United States)

Musial, Joanna

2014-01-01

This study analyzes degrees of differences between the private and public sectors of Polish higher education. It finds them to be strong: Polish private institutions function very differently from Polish public institutions and these differences correspond with those found in the literature on higher education elsewhere in the world. Polish…

Peptides and the new endocrinology

Science.gov (United States)

Schwyzer, Robert

1982-01-01

The discovery of regulatory peptides common to the nervous and the endocrine systems (brain, gut, and skin) has brought about a revolution in our concepts of endocrinology and neurology. We are beginning to understand some of the complex interrelationships between soma and psyche that might, someday, be important for an integrated treatment of diseases. Examples of the actions of certain peptides in the periphery and in the central nervous system are given, and their biosynthesis and molecular anatomy as carriers for information are discussed.

Gastrointestinal Hormones Induced the Birth of Endocrinology.

Science.gov (United States)

Wabitsch, Martin

2017-01-01

The physiological studies by British physiologists William Maddock Bayliss and Ernest Henry Starling, at the beginning of the last century, demonstrated the existence of specific messenger molecules (hormones) circulating in the blood that regulate the organ function and physiological mechanisms. These findings led to the concept of endocrinology. The first 2 hormones were secretin, discovered in 1902, and gastrin, discovered in 1905. Both hormones that have been described are produced in the gut. This chapter summarizes the history around the discovery of these 2 hormones, which is perceived as the birth of endocrinology. It is noteworthy that after the discovery of these 2 gastrointestinal hormones, many other hormones were detected outside the gut, and thereafter gut hormones faded from both the clinical and scientific spotlight. Only recently, the clinical importance of the gut as the body's largest endocrine organ producing a large variety of hormones has been realized. Gastrointestinal hormones are essential regulators of metabolism, growth, development and behavior and are therefore the focus of a modern pediatric endocrinologist. © 2017 S. Karger AG, Basel.

Surface Roughness and Gloss of Actual Composites as Polished With Different Polishing Systems.

Science.gov (United States)

Rodrigues-Junior, S A; Chemin, P; Piaia, P P; Ferracane, J L

2015-01-01

This in vitro study evaluated the effect of polishing with different polishing systems on the surface roughness and gloss of commercial composites. One hundred disk-shaped specimens (10 mm in diameter × 2 mm thick) were made with Filtek P-90, Filtek Z350 XT, Opallis, and Grandio. The specimens were manually finished with #400 sandpaper and polished by a single operator using three multistep systems (Superfix, Diamond Pro, and Sof-lex), one two-step system (Polidores DFL), and one one-step system (Enhance), following the manufacturer's instructions. The average surface roughness (μm) was measured with a surface profilometer (TR 200 Surface Roughness Tester), and gloss was measured using a small-area glossmeter (Novo-Curve, Rhopoint Instrumentation, East Sussex, UK). Data were analyzed by two-way analysis of variance and Tukey's test (α=0.05). Statistically significant differences in surface roughness were identified by varying the polishing systems (pGloss was influenced by the composites (pone-step system, Enhance, produced the lowest gloss for all composites. Surface roughness and gloss were affected by composites and polishing systems. The interaction between both also influenced these surface characteristics, meaning that a single polishing system will not behave similarly for all composites. The multistep systems produced higher gloss, while the one-step system produced the highest surface roughness and the lowest gloss of all.

Motivational interviewing in health care: results of a brief training in endocrinology.

Science.gov (United States)

Bean, Melanie K; Biskobing, Diane; Francis, Gary L; Wickham, Edmond

2012-09-01

Despite the importance of lifestyle change in disease management and the growing evidence supporting motivational interviewing (MI) as an effective counseling method to promote behavioral change, to date there are few published reports about MI training in graduate medical education. The study aimed to pilot the feasibility and effectiveness of a brief MI training intervention for endocrinology fellows and other providers. We used a pretest/posttest design to evaluate a brief MI training for 5 endocrinology fellows and 9 other providers. All participants completed subjective assessments of perceived confidence and beliefs about behavioral counseling at pretest and posttest. Objective assessment of MI was conducted using fellows' audiotaped patient encounters, which were coded using a validated tool for adherence to MI before and after the training. Paired t tests examined changes in objective and subjective assessments. The training intervention was well received and feasible in the endocrinology setting. At posttest, participants reported increased endorsement of the MI spirit and improved confidence in MI skills. Objective assessment revealed relative improvements in MI skills across several domains. However, most domains, as assessed by a validated tool, did not reach competency level after the training intervention. Although more intensive training may be needed to develop MI competence, the results of our pilot study suggest that brief, targeted MI training has short-term efficacy and is well received by endocrinology fellows and other providers.

Polish visit

CERN Document Server

2003-01-01

On 6 October, Professor Michal Kleiber, Polish Minister of Science and Chairman of the State Committee for Scientific Research, visited CERN and met both the current and designated Director General, Luciano Maiani and Robert Aymar. Professor Kleiber visited the CMS and ATLAS detector assembly halls, the underground cavern for ATLAS, and the LHC superconducting magnet string test hall. Michal Kleiber (left), Polish minister of science and Jan Krolikowski, scientist at Warsaw University and working for CMS, who shows the prototypes of the Muon Trigger board of CMS.

Chemical mechanical glass polishing with cerium oxide: Effect of selected physico-chemical characteristics on polishing efficiency

Czech Academy of Sciences Publication Activity Database

Janoš, P.; Ederer, J.; Pilařová, V.; Henych, Jiří; Tolasz, Jakub; Milde, D.; Opletal, T.

2016-01-01

Roč. 362, SEP (2016), s. 114-120 ISSN 0043-1648 R&D Projects: GA MŠk(CZ) LM2015073 Institutional support: RVO:61388980 Keywords : Chemical mechanical polishing * Ceria-based polishing powders * Polishing efficienc Subject RIV: CA - Inorganic Chemistry Impact factor: 2.531, year: 2016

Journal of Endocrinology, Metabolism and Diabetes of South Africa ...

African Journals Online (AJOL)

Journal of Endocrinology, Metabolism and Diabetes of South Africa. ... Management of diabetic ketoacidosis · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT ... Prediabetes: a focus on the role of diabetes education in prevention of type 2 ...

Field endocrinology of nonhuman primates: past, present, and future.

Science.gov (United States)

Higham, James P

2016-08-01

In the past few decades, research on nonhuman primate endocrinology has moved from the lab to the field, leading to a huge increase in both the breadth and depth of primate field studies. Here, I discuss the past, present, and future of primate field endocrinology. I review the history of the field, and go on to discuss methodological developments and the issues that they sometimes entail. Next, I consider ways in which we might conceptualize the role of hormones, and focus on the need to distinguish proximate from ultimate levels of explanation. Current potentially problematic issues in the field include: 1) an inability to obtain noninvasive measurements of Central Nervous System (CNS) rather than peripheral hormone concentrations; 2) research questions that become stuck (e.g., questions regarding sexual swelling expression mechanisms); 3) data dredging and post-hoc linking of hormones to any plausible variable, leading to a lack of clarity on their role in animal ecology and behavior. I finish by discussing several unanswered questions that might benefit from further research. These are how we might: 1) best obtain measurements for CNS hormone concentrations non-invasively; 2) measure hormone receptor expression alongside hormone concentrations; 3) consider the human endocrinology literature more thoroughly and perhaps take more multimarker approaches; 4) better consider the social environment, including audience and dyadic familiarity effects; and 5) apply our findings to conservation issues. Copyright © 2016 Elsevier Inc. All rights reserved.

Materials of 45. Scientific Assembly of Polish Chemical Society. Volumes 1-3

International Nuclear Information System (INIS)

2002-01-01

Scientific assemblies of Polish Chemical Society are the most important chemical meeting organised annually in Poland. Basic as well as application studies in all chemical branches have been extensively presented. The next subjects was proposed as scientific sessions and symposia topics: organic chemistry, inorganic chemistry, physical chemistry, analytical chemistry, technology and chemical engineering, polymer chemistry, solid state chemistry, catalysis, biological chemistry, chemistry and technology of coal, environmental protection, didactics of chemistry, history of chemistry, young scientist forum, flow analysis, and high-energy materials

Enhanced Production of Glucose Oxidase Using Penicillium notatum and Rice Polish

Directory of Open Access Journals (Sweden)

Shazia Sabir

2007-01-01

Full Text Available Glucose oxidase (GOD is an important enzyme that finds a wide range of applications in food and pharmaceutical industry. In this investigation the feasibility of using rice polish as a substrate for the production of GOD by Penicillium notatum in submerged fermentation (SmF has been evaluated. The intention was to enhance total GOD activity by the selection of economical substrate, microorganism and consecutive optimization of various cultural conditions. Maximum GOD activity of (112±5 U/mL was achieved under optimum growth conditions: rice polish 5 g, incubation period 72 h, buffering agent 3 % (by mass per volume, incubation temperature (30±1 °C and pH=6.0. Addition of carbon and nitrogen sources further enhanced the enzyme yield, indicating an economically attractive process for GOD production.

Aspects of ecological radiation endocrinology and occupational pathology

International Nuclear Information System (INIS)

Ajtbembetov, B.M.

1997-01-01

The collection consists of works on radiation endocrinology and occupational pathology in different branches of industry - petroleum, mining, cotton, non-ferrous metallurgy as well as agriculture. Collection is intended for endocrinologists and occupational pathologists, for specialists of labour protection and occupational safety, for doctors examining of industrial and agricultural workers (author)

Linguistic aspects of eponymic professional endocrinologic terminology

Directory of Open Access Journals (Sweden)

N.I. Bytsko

2017-03-01

Full Text Available Background. Special linguistic researches of terminological units of different branches of medicine allow analyzing in details the ways of creating the systems of clinical terminology from different aspects: historical, scientific, cultural, linguistic and semantic. There is a wide area of terminology related to the clinical and experimental endocrino­logy within general medical terminological system. The purpose of the study: to demonstrate the structure of endocrine medical terms — eponyms through the prism of systematization of methodological researches on eponymic vocabulary. Materials and methods. The actual material received as a result of a total choice of eponyms (there were 296 terms from the “Reference dictionary for endocrinologist”, which was composed by the scientists of V. Danilevsky Institute of Endocrine Pathology Problems and Kharkiv Medical Academy of Postgraduate education — A.V. Kozakov, N.A. Kravchun, I.M. Ilyina, M.I. Zubko, O.A. Goncharova, I.V. Cherniavska has 10,000 endocrine terms, the authors successfully streamlined medical terms of the clinical and experimental endocrinology into the vocabulary. The method of total choice of terms from professional literature, the descriptive method and distributive method were used in the study that allowed distinguishing lexical and semantic features of eponymic terms in the branch of endocrinology. Results. The obtained results point out to the modernity of studies in the field of clinical and experimental endocrinology, which is due to the fact that this is the oldest terminology, by the example of which it is possible to trace the ways of formation, development and improvement of terms, the realization of semantic processes, certain trends, ways and means of word formation. Conclusions. The results of the research on the above mentioned sublanguage of clinical medicine at the level of linguistic observations of the functio­ning in dictionaries and scientific works will

Endocrinology Telehealth Consultation Improved Glycemic Control Similar to Face-to-Face Visits in Veterans.

Science.gov (United States)

Liu, Winnie; Saxon, David R; McNair, Bryan; Sanagorski, Rebecca; Rasouli, Neda

2016-09-01

Rates of diabetes for veterans who receive health care through the Veterans Health Administration are higher than rates in the general population. Furthermore, many veterans live in rural locations, far from Veterans Affairs (VA) hospitals, thus limiting their ability to readily seek face-to-face endocrinology care for diabetes. Telehealth (TH) technologies present an opportunity to improve access to specialty diabetes care for such patients; however, there is a lack of evidence regarding the ability of TH to improve glycemic control in comparison to traditional face-to-face consultations. This was a retrospective cohort study of all new endocrinology diabetes consultations at the Denver VA Medical Center over a 1-year period. A total of 189 patients were included in the analysis. In all, 85 patients had received face-to-face (FTF) endocrinology consultation for diabetes and 104 patients had received TH consultation. Subjects were mostly males (94.7%) and the mean age was 62.8 ± 10.1 years old. HbA1c improved from 9.76% (9.40% to 10.11%) to 8.55% (8.20% to 8.91%) (P Endocrinology TH consultations improved short-term glycemic control as effectively as traditional FTF visits in a veteran population with diabetes. © 2016 Diabetes Technology Society.

Nanoscale wedge polishing of superconducting thin films-an easy way to obtain depth dependent information by surface analysis techniques

International Nuclear Information System (INIS)

Shapoval, T; Engel, S; Gruendlich, M; Meier, D; Backen, E; Neu, V; Holzapfel, B; Schultz, L

2008-01-01

A mechanical wedge polishing procedure that offers a simple, cost-effective and rapid way to look into the depth of a thin film with different surface-sensitive scanning techniques has been developed. As an example of its wide applicability, this method was utilized for the investigation of two differently prepared superconducting YBa 2 Cu 3 O 7-δ thin films: an Hf-doped film prepared by chemical solution deposition and an undoped film grown by pulsed laser deposition. Upon polishing, the roughness of the samples was reduced to less than 5 nm (peak-to-valley) without influencing the superconducting properties of the films. Thus, nanoscale polishing opens up a unique possibility for microscopic studies with various surface-sensitive techniques. We demonstrate the successful imaging of flux lines by low temperature magnetic force microscopy after polishing a formerly rough as-prepared film. By applying the wedge polishing procedure to the Hf-doped sample, high resolution electron backscattering diffraction investigations reveal the homogeneous distribution of non-superconducting BaHfO 3 nanoparticles in the whole volume of the film

Proceedings of the 16. Brazilian Congress of Endocrinology and Metabology

International Nuclear Information System (INIS)

1984-01-01

Studies in endocrinology and metabolism are presented. The primordial role of the use of radioisotopes in diagnosis, treatment and research is emphasized. Subjects like adrenal, gonads, diabetes, hypothalamus, parathyroid and thyroid are discussed. (M.A.C.) [pt

[Endocrinology, what's new in 2016].

Science.gov (United States)

Mavromati, Maria; Philippe, Jacques

2017-01-11

The European Society of Endocrinology has published this year a series of guidelines for hypoparathyroidism, the management of adrenal incidentalomas as well as for the long-term follow-up of patients operated on for a phaeochromocytoma/paraganglioma (PPGL). For hypoparathyroidism, guidelines insist on screening for chronic complications and monitoring treatment with calcium and vitamin D; the use of recombinant PTH may provide new opportunities for the future. Concerning adrenal incidentalomas, the panel of the guidelines primarily recommends non contrast CT for the evaluation of the risk of malignancy. Patients operated on for a PPGL, should be offered an individualized follow-up plan based on assessment of their risk of tumor recurrence.

Microbial endocrinology: Host-microbiota neuroendocrine interactions influencing brain and behavior.

Science.gov (United States)

Lyte, Mark

2014-01-01

The ability of microorganisms, whether present as commensals within the microbiota or introduced as part of a therapeutic regimen, to influence behavior has been demonstrated by numerous laboratories over the last few years. Our understanding of the mechanisms that are responsible for microbiota-gut-brain interactions is, however, lacking. The complexity of the microbiota is, of course, a contributing factor. Nonetheless, while microbiologists approaching the issue of microbiota-gut-brain interactions in the behavior well recognize such complexity, what is often overlooked is the equal complexity of the host neurophysiological system, especially within the gut which is differentially innervated by the enteric nervous system. As such, in the search for common mechanisms by which the microbiota may influence behavior one may look for mechanisms which are shared by both host and microbiota. Such interkingdom signaling can be found in the shared production of neurochemical mediators that are found in both eukaryotes and prokaryotes. The study of the production and recognition of neurochemicals that are exactly the same in structure to those produced in the vertebrate organisms is known as microbial endocrinology. The examination of the microbiota from the vantage point of host-microbiota neuroendocrine interactions cannot only identify new microbial endocrinology-based mechanisms by which the microbiota can influence host behavior, but also lead to the design of interventions in which the composition of the microbiota may be modulated in order to achieve a specific microbial endocrinology-based profile beneficial to overall host behavior.

The tourism attractiveness of Polish libraries

OpenAIRE

Miedzińska, Magdalena; Tanaś, Sławoj

2009-01-01

The aim of the article is to draw the reader's attention to the tourism attractiveness of renowned Polish libraries. These have attained a tourism function due to tourism exploration and penetration, but remain in the shadow of other Polish cultural assets. The article outlines the historical geography of Polish libraries, an analysis of tourism assets and an attempt to classify and catalogue libraries in Poland.

The clinical endocrinology workforce: current status and future projections of supply and demand.

Science.gov (United States)

Vigersky, Robert A; Fish, Lisa; Hogan, Paul; Stewart, Andrew; Kutler, Stephanie; Ladenson, Paul W; McDermott, Michael; Hupart, Kenneth H

2014-09-01

Many changes in health care delivery, health legislation, and the physician workforce that affect the supply and demand for endocrinology services have occurred since the first published workforce study of adult endocrinologists in 2003. The objective of the study was to assess the current adult endocrinology workforce data and provide the first analysis of the pediatric endocrinology workforce and to project the supply of and demand for endocrinologists through 2025. A workforce model was developed from an analysis of proprietary and publicly available databases, consultation with a technical expert panel, and the results of an online survey of board-certified endocrinologists. The Endocrine Society commissioned The Lewin Group to estimate current supply and to project gaps between supply and demand for endocrinologists. A technical expert panel of senior endocrinologists provided context, clinical information, and direction. The following were measured: 1) the current adult and pediatric endocrinology workforce and the supply of and demand for endocrinologists through 2025 and 2) the number of additional entrants into the endocrinology work pool that would be required to close the gap between supply and demand. Currently there is a shortage of approximately 1500 adult and 100 pediatric full-time equivalent endocrinologists. The gap for adult endocrinologists will expand to 2700 without an increase in the number of fellows trained. An increase in the prevalence of diabetes mellitus further expands the demand for adult endocrinologists. The gap can be closed in 5 and 10 years by increasing the number of fellowship positions by 14.4% and 5.5% per year, respectively. The gap between supply and demand for pediatric endocrinologists will close by 2016, and thereafter an excess supply over demand will develop at the current rate of new entrants into the work force. There are insufficient adult endocrinologists to satisfy current and future demand. A number of proactive

Detection of paint polishing defects

Science.gov (United States)

Rebeggiani, S.; Wagner, M.; Mazal, J.; Rosén, B.-G.; Dahlén, M.

2018-06-01

Surface finish plays a major role on perceived product quality, and is the first thing a potential buyer sees. Today end-of-line repairs of the body of cars and trucks are inevitably to secure required surface quality. Defects that occur in the paint shop, like dust particles, are eliminated by manual sanding/polishing which lead to other types of defects when the last polishing step is not performed correctly or not fully completed. One of those defects is known as ‘polishing roses’ or holograms, which are incredibly hard to detect in artificial light but are clearly visible in sunlight. This paper will present the first tests with a measurement set-up newly developed to measure and analyse polishing roses. The results showed good correlations to human visual evaluations where repaired panels were estimated based on the defects’ intensity, severity and viewing angle.

Tooth polishing: The current status

Directory of Open Access Journals (Sweden)

Madhuri Alankar Sawai

2015-01-01

Full Text Available Healthy teeth and gums make a person feel confident and fit. As people go about their daily routines and with different eating and drinking habits, the tooth enamel turns yellowish or gets stained. Polishing traditionally has been associated with the prophylaxis procedure in most dental practices, which patients know and expect. However, with overzealous use of polishing procedure, there is wearing of the superficial tooth structure. This would lead to more accumulation of local deposits. Also, it takes a long time for the formation of the fluoride-rich layer of the tooth again. Hence, now-a-days, polishing is not advised as a part of routine oral prophylaxis procedure but is done selectively based on the patients′ need. The article here, gives an insight on the different aspects of the polishing process along with the different methods and agents used for the same.

Polish Industry and Art at CERN

CERN Multimedia

2000-01-01

On 17 October 2000 the second Polish industrial and technological exhibition opened at CERN. The first one was held five years ago and nine of the companies that were present then have come back again this year. Six of those companies were awarded contracts with CERN in 1995. Three Polish officials were present at the Opening Ceremony today: Mrs Malgorzata Kozlowska, Under-secretary of State in the State Committee for Scientific Research, Mr Henryk Ogryczak, Under-secretary of State in Ministry of Economy and Prof. Jerzy Niewodniczanski, President of National Atomic Energy Agency. Professor Luciano Maiani welcomed the Polish delegation to CERN and stressed the important contribution of Polish scientists and industrialists to the work of the laboratory. Director General Luciano Maiani (back left) and head of SPL division Karl-Heinz Kissler (back right) visit the Poland at CERN exhibition… The exhibition offers Polish companies the opportunity to establish professional contacts with CERN. Nineteen companies...

Mandibular atrophy and metabolic bone loss. Endocrinology, radiology and histomorphometry

NARCIS (Netherlands)

Habets, L. L.; Bras, J.; Borgmeyer-Hoelen, A. M.

1988-01-01

In 11 edentulous patients with a severe atrophy of the mandible and submitted for ridge augmentation, endocrinological, radiological and histomorphometrical studies were carried out. The results showed that metabolic bone loss, histologically in nearly all patients characterized as a disturbance in

Polish polar research (outline

Directory of Open Access Journals (Sweden)

Krzysztof Ludwik Birkenmajer

2017-12-01

Full Text Available The article describes Polish research and discoveries in the Arctic and the Antarctic since the 19th century. The author is a geologist and since 1956 has been engaged in scientific field research on Spitsbergen, Greenland and Antarctica (23 expeditions. For many years chairman of the Committee on Polar Research of the Polish Academy of Sciences, he is now its Honorary Chairman.

Conformal polishing approach: Tool footprint analysis

Directory of Open Access Journals (Sweden)

José A Dieste

2016-02-01

Full Text Available Polishing process is one of the most critical manufacturing processes during a metal part production because it determines the final quality of the product. Free-form surface polishing is a handmade process with lots of rejected parts, scrap generation and time and energy consumption. Two different research lines are being developed: prediction models of the final surface quality parameters and an analysis of the amount of material removed depending on the polishing parameters to predict the tool footprint during the polishing task. This research lays the foundations for a future automatic conformal polishing system. It is based on rotational and translational tool with dry abrasive in the front mounted at the end of a robot. A tool to part concept is used, useful for large or heavy workpieces. Results are applied on different curved parts typically used in tooling industry, aeronautics or automotive. A mathematical model has been developed to predict the amount of material removed in function of polishing parameters. Model has been fitted for different abrasives and raw materials. Results have shown deviations under 20% that implies a reliable and controllable process. Smaller amount of material can be removed in controlled areas of a three-dimensional workpiece.

Zerodur polishing process for high surface quality and high efficiency

International Nuclear Information System (INIS)

Tesar, A.; Fuchs, B.

1992-08-01

Zerodur is a glass-ceramic composite importance in applications where temperature instabilities influence optical and mechanical performance, such as in earthbound and spaceborne telescope mirror substrates. Polished Zerodur surfaces of high quality have been required for laser gyro mirrors. Polished surface quality of substrates affects performance of high reflection coatings. Thus, the interest in improving Zerodur polished surface quality has become more general. Beyond eliminating subsurface damage, high quality surfaces are produced by reducing the amount of hydrated material redeposited on the surface during polishing. With the proper control of polishing parameters, such surfaces exhibit roughnesses of < l Angstrom rms. Zerodur polishing was studied to recommend a high surface quality polishing process which could be easily adapted to standard planetary continuous polishing machines and spindles. This summary contains information on a polishing process developed at LLNL which reproducibly provides high quality polished Zerodur surfaces at very high polishing efficiencies

Lysenko affair and Polish botany.

Science.gov (United States)

Köhler, Piotr

2011-01-01

This article describes the slight impact of Lysenkoism upon Polish botany. I begin with an account of the development of plant genetics in Poland, as well as the attitude of scientists and the Polish intelligentsia toward Marxist philosophy prior to the World War II. Next I provide a short history of the introduction and demise of Lysenkoism in Polish science, with a focus on events in botany, in context with key events in Polish science from 1939 to 1958. The article outlines the little effects of Lysenkoism upon botanists and their research, as well as how botanists for the most part rejected what was often termed the "new biology." My paper shows that though Lysenko's theories received political support, and were actively promoted by a small circle of scientists and Communist party activists, they were never accepted by most botanists. Once the political climate in Poland altered after the events of 1956, Lysenko's theories were immediately abandoned.

Important Literature in Endocrinology: Citation Analysis and Historial Methodology.

Science.gov (United States)

Hurt, C. D.

1982-01-01

Results of a study comparing two approaches to the identification of important literature in endocrinology reveals that association between ranking of cited items using the two methods is not statistically significant and use of citation or historical analysis alone will not result in same set of literature. Forty-two sources are appended. (EJS)

[Acne vulgaris: morphologic, endocrinologic and psychosomatic aspects].

Science.gov (United States)

Welp, K; Gieler, U

1990-12-01

25 male patients suffering from acne vulgaris were examined by means of endocrinological, morphological, and 5 psychometric procedures in order to check the correlations and interactions between the psychological and dermatological aspects of the disease. In comparison with a control group, the acne patients did not show any striking endocrinological abnormalities; we found no correlation between the extensiveness of the lesions and the level of DHEA sulphate. All the psychological tests yielded results deviating from those achieved by the representative controls, but they were comparable with those of other patients suffering from psychosomatic diseases. The individual feeling of being "disfigured" found its expression in self-consciousness, lack of trust in his/her own body, as well as the clinically relevant difference between his/her conception of self and the ideal of self. During times of enhanced psychosocial strains subjectively assumed by the patients, the lesions increased and the patients were disturbed in social interaction and communication. Surprisingly, we did not find any correlation between the clinical status and significant psychometric findings. Our results show that in acne vulgaris, the individual experience of wanting physical attractiveness, associated with a predominantly neurotic depressive personal structure, may play a central part in a disturbed process of interaction with the environment and suggest the influence of psychic factors in the pathogenesis of acne vulgaris.

Chemical polishing of partially oxidized T-111 alloy

International Nuclear Information System (INIS)

Teaney, P.E.

1974-01-01

The specimens were pressure-mounted in Bakelite and ground through 600 grit on silicon carbide papers. The specimens were rough-polished on a vibratory polisher for 4 to 6 h, using a water slurry of one micron alumina on Texmet, followed by 0.3-μ alumina on Texmet overnight. Final polishing was accomplished by continuous swabbing with a chemical polish. A chemical polish consisting of ten parts lactic acid, four parts nitric acid, and four parts hydrofluoric acid worked well for the T-111 parent material specimens; however, in the partially oxidized specimens, considerable pitting and staining occurred in the oxygen-affected zone and in the transition zone between the oxygen-affected zone and the parent material. A chemical polish was developed for the partially oxidized specimens by adjusting the ratio of the acids to ten parts lactic acid, two parts nitric acid, and two parts hydrofluoric acid. This slowed the chemical attack on the oxygen-affected zone considerably and, with continuous swabbing, the pitting and stain could be avoided. The specimens were rinsed and checked occasionally on the metallograph to determine when the proper polish had been obtained. Some specimens required intermittent polishing times up to 1 / 2 hour. No relationship could be established between the oxygen content of the specimen and the time required for chemical polishing in the partially oxidized specimens. However, the microstructure of the transition zone was the most difficult to obtain, and specimens with uniform reaction zones across the width of the specimen polished quicker than those with the transition zone

Graphite Composite Panel Polishing Fixture

Science.gov (United States)

Hagopian, John; Strojny, Carl; Budinoff, Jason

2011-01-01

The use of high-strength, lightweight composites for the fixture is the novel feature of this innovation. The main advantage is the light weight and high stiffness-to-mass ratio relative to aluminum. Meter-class optics require support during the grinding/polishing process with large tools. The use of aluminum as a polishing fixture is standard, with pitch providing a compliant layer to allow support without deformation. Unfortunately, with meter-scale optics, a meter-scale fixture weighs over 120 lb (.55 kg) and may distort the optics being fabricated by loading the mirror and/or tool used in fabrication. The use of composite structures that are lightweight yet stiff allows standard techniques to be used while providing for a decrease in fixture weight by almost 70 percent. Mounts classically used to support large mirrors during fabrication are especially heavy and difficult to handle. The mount must be especially stiff to avoid deformation during the optical fabrication process, where a very large and heavy lap often can distort the mount and optic being fabricated. If the optic is placed on top of the lapping tool, the weight of the optic and the fixture can distort the lap. Fixtures to support the mirror during fabrication are often very large plates of aluminum, often 2 in. (.5 cm) or more in thickness and weight upwards of 150 lb (68 kg). With the addition of a backing material such as pitch and the mirror itself, the assembly can often weigh over 250 lb (.113 kg) for a meter-class optic. This innovation is the use of a lightweight graphite panel with an aluminum honeycomb core for use as the polishing fixture. These materials have been used in the aerospace industry as structural members due to their light weight and high stiffness. The grinding polishing fixture consists of the graphite composite panel, fittings, and fixtures to allow interface to the polishing machine, and introduction of pitch buttons to support the optic under fabrication. In its

APS 3D: a new benchmark in aspherical polishing

Science.gov (United States)

Gauch, Daniel; Mikulic, Dalibor; Veit, Christian

2017-10-01

The APS 3D system performs polishing and form correction in one step in order to reduce overall process time, reduce the number of polishing steps required and eliminate the need for highly skilled operators while providing a repeatable polishing process. This new 3D Polishing system yields better surface quality, and a better slope error, automatically determining the optimum speeds, feed rates and polish pressures to achieve a deterministic process based on the required quality parameters input by the operator. The process flow is always the same to ensure consistent quality and target quality values are defined before polishing begins.

Polish Americans. Second, Revised Edition.

Science.gov (United States)

Lopata, Helen Znaniecka

This book examines Polonia, the Polish ethnic community in America created by three giant waves of immigration between 1880 and 1990. The complicated history of this ethnic group is reflected in the lives of increasing numbers of Polish Americans, including recent immigrants brought by political and economic changes, as they achieve middle class…

Experimental Polish-Lithuanian Corpus with the Semantic Annotation Elements

Directory of Open Access Journals (Sweden)

Danuta Roszko

2015-06-01

Full Text Available Experimental Polish-Lithuanian Corpus with the Semantic Annotation Elements In the article the authors present the experimental Polish-Lithuanian corpus (ECorpPL-LT formed for the idea of Polish-Lithuanian theoretical contrastive studies, a Polish-Lithuanian electronic dictionary, and as help for a sworn translator. The semantic annotation being brought into ECorpPL-LT is extremely useful in Polish-Lithuanian contrastive studies, and also proves helpful in translation work.

Thermal management of metallic surfaces: evaporation of sessile water droplets on polished and patterned stainless steel

Science.gov (United States)

Czerwiec, T.; Tsareva, S.; Andrieux, A.; Bortolini, G. A.; Bolzan, P. H.; Castanet, G.; Gradeck, M.; Marcos, G.

2017-10-01

This communication focus on the evaporation of sessile water droplets on different states of austenitic stainless steel surfaces: mirror polished, mirror polished and aged and patterned by sputtering. The evolution of the contact angle and of the droplet diameter is presented as a function of time at room temperature. For all the surface states, a constant diameter regime (CCR) is observed. An important aging effect on the contact angle is measured on polished surfaces due to atmospheric contamination. The experimental observations are compared to a quasi-static evaporation model assuming spherical caps. The evolution of the droplet volume as a function of time is almost linear with the evaporation time for all the observed surfaces. This is in accordance with the model prediction for the CCR mode for small initial contact angles. In our experiments, the evaporation time is found to be linearly dependent on the initial contact angle. This dependence is not correctly described by the evaporation model

Brown-Sèquard, otro Precursor de la Endocrinología.

Directory of Open Access Journals (Sweden)

Alfredo Jácome Roca Rodriguez

2008-03-01

Admitimos que cada tejido y –más generalmente- cada célula del organismo, segregue por su propia cuenta productos o fermentos especiales que –derramados en la sangre- influyen por mediación de este líquido en todas las otras células, las cuales llegan a ser de este modo solidarias entre sí por un mecanismo diferente al del sistema nervioso… Como era frecuente que a aquellas glándulas sin conducto se les considerara un papel neutralizador de toxinas, propone su utilidad para el organismo, bien por este efecto antitóxico o por una influencia directa favorable. De cualquier manera, este sorpresivo pregón anunció el nacimiento de la endocrinología. Que -a juzgar por los avisos que hemos encontrado en el primer número de los Anales Franceses de Endocrinología en 1939- se interesaba mucho en las hormonas sexuales, las que en aquella época campeaban en la opoterapia.

Assessing operability of a novel polisher arrangement using MMS

International Nuclear Information System (INIS)

Shor, S.W.W.

1987-01-01

A condensate polisher is intended to remove both particulate matter and ionic material from the condensate. Condensate polishers have normally been placed directly in the condensate system downstream of the condensate pumps. This inline location has certain disadvantages. These disadvantages are discussed. Placing the polisher in a sidestream location, where water is removed from the condensate system, pumped through the polisher, and then returned to the condensate system provides a solution to these disadvantages. Several possible types of sidestream installations is described. This has a polisher taking unpolished condensate from one compartment from one compartment of a divided hotwell in a specially modified condenser and returning polished condensate to the other compartment. The polisher is supplied by its own dedicated pumps, which have a head requirement sufficient only to overcome the pressure drop through the polisher circuit at a flow rate of 110% of maximum condensate flow. This concept is very attractive but has not yet been tested even though it is being installed in several new units. A simulation was, therefore, performed using MMS to provide confidence that this particular sidestream polisher arrangement was operationally viable

Laser polishing of additive manufactured Ti alloys

Science.gov (United States)

Ma, C. P.; Guan, Y. C.; Zhou, W.

2017-06-01

Laser-based additive manufacturing has attracted much attention as a promising 3D printing method for metallic components in recent years. However, surface roughness of additive manufactured components has been considered as a challenge to achieve high performance. In this work, we demonstrate the capability of fiber laser in polishing rough surface of additive manufactured Ti-based alloys as Ti-6Al-4V and TC11. Both as-received surface and laser-polished surfaces as well as cross-section subsurfaces were analyzed carefully by White-Light Interference, Confocal Microscope, Focus Ion Beam, Scanning Electron Microscopy, Energy Dispersive Spectrometer, and X-ray Diffraction. Results revealed that as-received Ti-based alloys with surface roughness more than 5 μm could be reduce to less than 1 μm through laser polishing process. Moreover, microstructure, microhardness and wear resistance of laser-polished zone was investigated in order to examine the thermal effect of laser polishing processing on the substrate of additive manufactured Ti alloys. This proof-of-concept process has the potential to effectively improve the surface roughness of additive manufactured metallic alloy by local polishing method without damage to the substrate.

Physiology and Endocrinology Symposium. Factors controlling puberty in beef heifers

Science.gov (United States)

The Physiology and Endocrinology Symposium on “Factors controlling puberty in beef heifers” was held at the joint annual meeting of the American Dairy Science Association and the American Society of Animal Science in New Orleans, Louisiana, USA, July 10 to 14, 2011. The objective of the symposium w...

Development of an e-learning portal for pediatric endocrinology : Educational considerations

NARCIS (Netherlands)

K. Grijpink-Van den Biggelaar; S.L.S. Drop (Stenvert); L. Schuwirth

2010-01-01

textabstractBackground: Global accessibility and dissemination of developments in pediatric endocrinology prompted to examine how to develop an educational interactive e-SPE web portal. Methods: A systematic approach was used to identify the relevant aspects of accessibility and dissemination. An

Production of rare earth polishing powders in Russia

International Nuclear Information System (INIS)

Kosynkin, V.D.; Ivanov, E.N.; Kotrekhov, V.A.; Shtutza, M.G.; Grabko, A.I.

1998-01-01

Full text: Russia is a potent producer of polishing powders made of rare earth material presented as an extensive and well developed base. Considering the reserves, the facilities predisposition and the polishing agent (cerium dioxide) content the chief mineral source is loparite, apatite and monazite. The production of rare earth polishing powders is based on specially developed continuous technological processes, corrosion-proof equipment, ensuring a high and stable production quality. A special attention is paid to the radiation safety of the powders. The initial material for the rare earth polishing powders based on loparite is the fusion cake of rare earth chlorides obtained at that mineral chlorination. The technology of the polishing powder production from the REE fusion cake includes the following stages: dissolution of the REE fusion cake chlorides; - thorough cleaning of the REE fusion cake chlorides from radioactive and non-rare-earth impurities; chemical precipitation of REE carbonates, obtaining middlings with proper material and granulometric composition, thermal treatment of precipitated carbonates followed with the operations of drying and roasting; classification of roasted oxides, obtaining end products - polishing powders. The production of fluorine-containing powders includes the stage of their fluorination after the stage of carbonate precipitation. The stabilizing doping can be introduced both into the middlings during one of the technological process of powders manufacturing and into the end product. Rare earth polishing powders are manufactured in Russia by the Share Holding Company 'Chepetz Mechanical Plant' (ChMP Co.), the city of Glasov. The plant produces a number of polishing materials, such as; polishing powder Optinol, containing at least 50% by mass of cerium dioxide, used in the mass production of optical and other articles; polishing powder Optinol-10 with doping to improve the sedimentary and aggregate stability of the solid phase

Polishing of silicon based advanced ceramics

Science.gov (United States)

Klocke, Fritz; Dambon, Olaf; Zunke, Richard; Waechter, D.

2009-05-01

Silicon based advanced ceramics show advantages in comparison to other materials due to their extreme hardness, wear and creep resistance, low density and low coefficient of thermal expansion. As a matter of course, machining requires high efforts. In order to reach demanded low roughness for optical or tribological applications a defect free surface is indispensable. In this paper, polishing of silicon nitride and silicon carbide is investigated. The objective is to elaborate scientific understanding of the process interactions. Based on this knowledge, the optimization of removal rate, surface quality and form accuracy can be realized. For this purpose, fundamental investigations of polishing silicon based ceramics are undertaken and evaluated. Former scientific publications discuss removal mechanisms and wear behavior, but the scientific insight is mainly based on investigations in grinding and lapping. The removal mechanisms in polishing are not fully understood due to complexity of interactions. The role of, e.g., process parameters, slurry and abrasives, and their influence on the output parameters is still uncertain. Extensive technological investigations demonstrate the influence of the polishing system and the machining parameters on the stability and the reproducibility. It is shown that the interactions between the advanced ceramics and the polishing systems is of great relevance. Depending on the kind of slurry and polishing agent the material removal mechanisms differ. The observed effects can be explained by dominating mechanical or chemo-mechanical removal mechanisms. Therefore, hypotheses to state adequate explanations are presented and validated by advanced metrology devices, such as SEM, AFM and TEM.

Study on chemical mechanical polishing of silicon wafer with megasonic vibration assisted.

Science.gov (United States)

Zhai, Ke; He, Qing; Li, Liang; Ren, Yi

2017-09-01

Chemical mechanical polishing (CMP) is the primary method to realize the global planarization of silicon wafer. In order to improve this process, a novel method which combined megasonic vibration to assist chemical mechanical polishing (MA-CMP) is developed in this paper. A matching layer structure of polishing head was calculated and designed. Silicon wafers are polished by megasonic assisted chemical mechanical polishing and traditional chemical mechanical polishing respectively, both coarse polishing and precision polishing experiments were carried out. With the use of megasonic vibration, the surface roughness values Ra reduced from 22.260nm to 17.835nm in coarse polishing, and the material removal rate increased by approximately 15-25% for megasonic assisted chemical mechanical polishing relative to traditional chemical mechanical polishing. Average Surface roughness values Ra reduced from 0.509nm to 0.387nm in precision polishing. The results show that megasonic assisted chemical mechanical polishing is a feasible method to improve polishing efficiency and surface quality. The material removal and finishing mechanisms of megasonic vibration assisted polishing are investigated too. Copyright © 2017 Elsevier B.V. All rights reserved.

Endocrinology in the 21st century: unmasking the mysteries of biology

NARCIS (Netherlands)

Romijn, J. A.

1999-01-01

The traditional concept of endocrinology has provided a model, that enabled to understand and treat endocrine diseases. Molecular and (patho)physiological differentiations of this concept will further improve the treatment of complex endocrine and metabolic diseases. Nature has lifted a tip of her

STUDY OF POLISHING AISI 316L WITH STRUCTURED ABRASIVE

Directory of Open Access Journals (Sweden)

François GOOSSENS

2015-05-01

Full Text Available Finishing process like polishing is usually used to obtain high quality mechanical surface characteristics such as texture and roughness. These operations are mainly handmade and need highly trained operators thus limiting their repeatability and profitability. To optimize the industrialization of the polishing process, it is therefore necessary to modelize the process to built efficient parameter database. The aim of this study is to characterise the polishing of 316L stainless steel with structured abrasive belts. The geometric data of the belts are given, and we then propose a model to determine material removal. An experimental test bench is set up to test this model and characterise the polishing process in terms of forces. It produces samples for different polishing conditions. The different polished surfaces are then analyzed thanks to the roughness and the wettability. Using experimental designs, we are able to validate the proposed model and identify the parameters that influence a polishing operation.

Technological Advances of Robot Assisted Polishing

DEFF Research Database (Denmark)

Lazarev, Ruslan; Top, Søren; Grønbæk, Jens

The efficient polishing of surfaces is very important in mould and die industry. Fine abrasive processes are widely used in industry for the first steps for the production of tools of high quality in terms of finishing accuracy, form and surface integrity. While manufacturing of most components....... In this study, the influence of polishing parameters and type of polishing media on fine abrasive surface finishing is investigated. Experimental study is covering 2D rotational surfaces that is widespread used in mould and dies industry. Application of it is essential for process intelligent control, condition...... monitoring and quality inspection....

The Polish Mother on the defensive? The transformation of the myth and its impact on the motherhood of Polish women

Directory of Open Access Journals (Sweden)

Agnieszka Imbierowicz

2012-06-01

Full Text Available The subject of this presentation is the attempt to define and to present the origins, socio-cultural content and the evolution of The Polish Mother myth, present in the polish national consciousness. The author tries to show how this myth was born, what functions it fulfilled and what forms it took in the changing historical and social reality, from the moment of loss of independence, through a period of real socialism, until the present day. The impact of this myth in the lives of real women and their motherhood is taken into consideration. Then, the author comparing the results of the latest polish sociological researches on the family and its transformation, and transformation of value systems together with theories about the specifics of life in the period of postmodernity, wonders whether it’s time to deconstruct the myth of The Polish Mother, because it does not fit the conditions of today’s world, which is characterized, above all, by the apotheosis of individuality, self-realization and freedom, or perhaps in polish society there is still strong traditionalism in thinking about motherhood, and the myth of The Polish Mother is still alive?

Effect of polishing instruments and polishing regimens on surface topography and phase transformation of monolithic zirconia: An evaluation with XPS and XRD analysis.

Science.gov (United States)

Al-Haj Husain, Nadin; Camilleri, Josette; Özcan, Mutlu

2016-12-01

Polishing procedures might alter monolithic zirconia (MZ) surface resulting in phase changes that can be deleterious for clinical performance and antagonist tooth wear. This study investigated the topographical features and phase transformation in MZ after polishing with different regimens simulating the clinical workflow. ​ MZ specimens (Katana Zirconia HT, Kuraray-Noritake) (12×12×1.8 mm(3)) were grinded and polished using one of the five systems assessed: BG: Silicone carbide polishers (Brownie, Greenie, Super Greenie); CG: Diamond impregnated ceramic polisher kit (Ceragloss); EV: Synthetically bonded grinder interspersed with diamond (EVE Kit); SL: Urethane coated paper with aluminium oxide grits (Soflex Finishing and Polishing System Kit) and DB: Diamond bur (8 µm). Polished specimens were initially roughened with 220 µm diamond burs (Grinding Bur-GB) (10 s, 160.000160,000 rpm) and considered for baseline measurements. Polishing regimens were performed for 10 s using a slow-speed hand piece under water-cooling except for SL, in a custom made device (750 g; 5000 and 75,000 rpm). Surface roughnesses, phase changes (XRD) were assessed, surface characterization was performed (SEM, EDS). The highest roughness was obtained with the EV system (1.11 µm) compared to those of other systems (0.13-0.4 µm) (pθ and minor peak at 34.94°2θ. While GB, CG, EV, SL and DB exhibited a peak shift to the left, BG demonstrated a right peak shift on the 2θ scale. Monoclinic phase change was not noted in any of the groups. All polishing methods, except BG, exhibited a peak shift towards the lower angles of the 2-theta scale. Since the peak shifts were in the order of fractions of an angle they are attributed to stress formation rather than a phase change in the material. Thus, all polishing systems tested may not be detrimental for the phase transformation of MZ. EV system resulted in the highest roughness and none of the polishing regimens restored the polishability to the

Development of computer program for the economic evaluation of the volume reduction system for the low-level radwaste

International Nuclear Information System (INIS)

Yang, Jin Yeong

1994-02-01

This study provides the basis for investigating the benefits of purchasing volume reduction equipment and includes the establishment of a volume reduction data base, the creation of the volume reduction cost analysis computer program PEEVR (Program of Economic Evaluation for the Volume Reduction), and a generic analysis designed to identify the major costs influencing the economics of the various equipment options. In treating the plant types and the wastes, this study considers that condensate polishing system is included or not in PWR and precoat condensate polishing system, deep bed condensate polishing system in BWR and the 5 waste streams, i.e., compatible trash (COTRASH), ion exchange resin (IXRESIN), concentrate liquid (CONCLIQ), filter sludge (FSLUDGE), non compatible trash (COTRASH). This study uses the PVRR and LRR methods to create cost analysis and performs sensitivity analysis for the each cost variable and shows that future burial costs increases are the major factors in the economic evaluation

ONR Far East Scienticic Bulletin. Volume 11, Number 4, October-December 1986,

Science.gov (United States)

1986-12-01

pellet, the energy becomes on the order of 50 MJ. If this energy is supplied by a capacitor bank, the volume of the bank becomes gigantic , provided that...ku, Tokyo 171 July International Congress of Kyoto, Japan Endocrine Society 17-23 Endocrinology Japan c/o Seirenkaikan N.A.-F1,5OO-42,000 Kyoto

Chemical Mechanical Polishing Optimization for 4H-SiC

National Research Council Canada - National Science Library

Neslen, Craig

2000-01-01

.... Preliminary chemical mechanical polishing (CMP) studies of 1 3/8" 4H-SiC wafers were performed in an attempt to identify the polishing parameter values that result in a maximum material removal rate and thus reduce substrate polishing time...

Auxo-Endocrinological Approach to Celiac Children

Directory of Open Access Journals (Sweden)

Mauro Bozzola

2015-06-01

Full Text Available Celiac disease is a permanent genetically determined intolerance to gluten that generally presents with gastrointestinal symptoms in young children and extraintestinal manifestations (endocrinological, dermatological, neurological, etc. later. Furthermore, many studies demonstrate the close association between celiac and endocrine diseases, including growth and pubertal disorders, type I diabetes mellitus and autoimmune thyroid diseases, probably due to the presence of a common genetic predisposition. Follow-up for celiac children after the start of gluten-free diet is mandatory to avoid complications such as growth hormone deficiency. The present review deals with the problem of the diagnosis of endocrine-associated diseases in celiac children and gives suggestions for correct management and follow-up of these patients.

Laser polishing of 3D printed mesoscale components

International Nuclear Information System (INIS)

Bhaduri, Debajyoti; Penchev, Pavel; Batal, Afif; Dimov, Stefan; Soo, Sein Leung; Sten, Stella; Harrysson, Urban; Zhang, Zhenxue; Dong, Hanshan

2017-01-01

Highlights: • Process optimisation for laser polishing novel 3D printed SS316L parts. • Evaluating the effects of key polishing parameters on SS316L surface roughness. • Detailed spectroscopic analysis of oxide layer formation due to laser polishing. • Comparative surface integrity analysis of SS parts polished in air and argon. • A maximum reduction in roughness of over 94% achieved at optimised polishing settings. - Abstract: Laser polishing of various engineered materials such as glass, silica, steel, nickel and titanium alloys, has attracted considerable interest in the last 20 years due to its superior flexibility, operating speed and capability for localised surface treatment compared to conventional mechanical based methods. The paper initially reports results from process optimisation experiments aimed at investigating the influence of laser fluence and pulse overlap parameters on resulting workpiece surface roughness following laser polishing of planar 3D printed stainless steel (SS316L) specimens. A maximum reduction in roughness of over 94% (from ∼3.8 to ∼0.2 μm S_a) was achieved at the optimised settings (fluence of 9 J/cm"2 and overlap factors of 95% and 88–91% along beam scanning and step-over directions respectively). Subsequent analysis using both X-ray photoelectron spectroscopy (XPS) and glow discharge optical emission spectroscopy (GDOES) confirmed the presence of surface oxide layers (predominantly consisting of Fe and Cr phases) up to a depth of ∼0.5 μm when laser polishing was performed under normal atmospheric conditions. Conversely, formation of oxide layers was negligible when operating in an inert argon gas environment. The microhardness of the polished specimens was primarily influenced by the input thermal energy, with greater sub-surface hardness (up to ∼60%) recorded in the samples processed with higher energy density. Additionally, all of the polished surfaces were free of the scratch marks, pits, holes, lumps

Laser polishing of 3D printed mesoscale components

Energy Technology Data Exchange (ETDEWEB)

Bhaduri, Debajyoti, E-mail: debajyoti.bhaduri@gmail.com [Department of Mechanical Engineering, School of Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom); Penchev, Pavel; Batal, Afif; Dimov, Stefan; Soo, Sein Leung [Department of Mechanical Engineering, School of Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom); Sten, Stella; Harrysson, Urban [Digital Metal, Höganäs AB, 263 83 Höganäs (Sweden); Zhang, Zhenxue; Dong, Hanshan [School of Metallurgy and Materials, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom)

2017-05-31

Highlights: • Process optimisation for laser polishing novel 3D printed SS316L parts. • Evaluating the effects of key polishing parameters on SS316L surface roughness. • Detailed spectroscopic analysis of oxide layer formation due to laser polishing. • Comparative surface integrity analysis of SS parts polished in air and argon. • A maximum reduction in roughness of over 94% achieved at optimised polishing settings. - Abstract: Laser polishing of various engineered materials such as glass, silica, steel, nickel and titanium alloys, has attracted considerable interest in the last 20 years due to its superior flexibility, operating speed and capability for localised surface treatment compared to conventional mechanical based methods. The paper initially reports results from process optimisation experiments aimed at investigating the influence of laser fluence and pulse overlap parameters on resulting workpiece surface roughness following laser polishing of planar 3D printed stainless steel (SS316L) specimens. A maximum reduction in roughness of over 94% (from ∼3.8 to ∼0.2 μm S{sub a}) was achieved at the optimised settings (fluence of 9 J/cm{sup 2} and overlap factors of 95% and 88–91% along beam scanning and step-over directions respectively). Subsequent analysis using both X-ray photoelectron spectroscopy (XPS) and glow discharge optical emission spectroscopy (GDOES) confirmed the presence of surface oxide layers (predominantly consisting of Fe and Cr phases) up to a depth of ∼0.5 μm when laser polishing was performed under normal atmospheric conditions. Conversely, formation of oxide layers was negligible when operating in an inert argon gas environment. The microhardness of the polished specimens was primarily influenced by the input thermal energy, with greater sub-surface hardness (up to ∼60%) recorded in the samples processed with higher energy density. Additionally, all of the polished surfaces were free of the scratch marks, pits, holes

Polish Qualitative Sociology: The General Features and Development

OpenAIRE

Konecki, Krzysztof Tomasz

2005-01-01

The article explores the development of Polish qualitative sociology in Poland by presenting its main intellectual routes and some of the general features of Polish sociology. Romanticism and inductionmethod are crucial elements for the development of this discipline in Poland and contribute to its. unigueness. The role of Florian Znaniecki in creating the Polish qualitative sociology is also underlined. Krzysztof Konecki

Sensing roughness and polish direction

DEFF Research Database (Denmark)

Jakobsen, Michael Linde; Olesen, Anders Sig; Larsen, Henning Engelbrecht

2016-01-01

As a part of the work carried out in a project supported by the Danish Council for Technology and Innovation, we have investigated the option of smoothing standard CNC-machined surfaces. In the process of constructing optical prototypes, involving custom-designed optics, the development cost...... and time consumption can become prohibitive in a research budget. Machining the optical surfaces directly is expensive and time consuming. Alternatively, a more standardized and cheaper machining method can be used, calling for the object to be manually polished. During the polishing process, the operator...... needs information about the RMS-value of the surface roughness and the current direction of the scratches introduced by the polishing process. The RMS-value indicates to the operator how far he is from the final finish, and the scratch orientation is often specified by the customer in order to avoid...

Role of Mass Spectrometry in Clinical Endocrinology.

Science.gov (United States)

Ketha, Siva S; Singh, Ravinder J; Ketha, Hemamalini

2017-09-01

The advent of mass spectrometry into the clinical laboratory has led to an improvement in clinical management of several endocrine diseases. Liquid chromatography tandem mass spectrometry found some of its first clinical applications in the diagnosis of inborn errors of metabolism, in quantitative steroid analysis, and in drug analysis laboratories. Mass spectrometry assays offer analytical sensitivity and specificity that is superior to immunoassays for many analytes. This article highlights several areas of clinical endocrinology that have witnessed the use of liquid chromatography tandem mass spectrometry to improve clinical outcomes. Copyright © 2017 Elsevier Inc. All rights reserved.

Effects of polishing procedures on color stability of composite resins

Directory of Open Access Journals (Sweden)

Ahmet Umut Güler

2009-04-01

Full Text Available The purpose of this study was to investigate the effect of different polishing methods on color stability of posterior, universal and nanohybrid composite resin restorative materials upon exposure to a staining agent. Twenty-five specimens were prepared for each of 5 different composite resins (Filtek Z250, Filtek P60, Quadrant LC, Grandio and Filtek Supreme. Specimens were divided into 5 groups and different polishing procedures, including polishing discs (Pd, polishing discs then diamond polishing paste (PdP, polishing discs then a liquid polishing system (Biscover (PdB, and combinations of these (PdPB were used. Unpolished specimens served as the control (C. The specimens were stored for 48 h in a coffee solution. The color of all specimens was measured before and after exposure with a colorimeter, and total color change (DE* were calculated. The data were analyzed with a two-way ANOVA and the means were compared by Tukey HSD test (a=0.05. The lowest color difference was observed in the groups PdP and C, while the highest color difference was observed in PdPB, and PdB. When comparing the five different restorative materials, no significant difference was observed between FiltekP60 and FiltekZ250, and these materials demonstrated significantly less color change than Quadrant LC and the nanohybrid materials (Grandio, Filtek Supreme. The posterior (Filtek P60 and universal (Filtek Z250 composite resin restorative materials, which do not contain tetraethyleneglycol dimethacrylate (TEGDMA, were found to be less stainable than the nanohybrid (Grandio, Filtek Supreme and universal (Quadrant LC composite resins, which contain TEGDMA. The use of diamond polishing paste after polishing with polishing discs significantly decreased staining when compared to the groups that used polishing discs alone, for all restorative materials tested. The highest color change values were obtained for the specimens that were polished with the Biscover liquid polish

Development of computer program for the economic evaluation of the volume reduction system for the low-level radioactive waste

International Nuclear Information System (INIS)

Yang, Jin Yeong; Lee, Kun Jai

1994-01-01

This study provides the basis for investigating the benefits of purchasing volume reduction equipment and includes the establishment of a volume reduction data base, the creation of the volume reduction cost analysis computer program PEEVR (Program of Economic Evaluation for the Volume Reduction), and a generic analysis designed to identify the major costs influencing the economics of the various equipment options. In treating the plant types and the wastes, this study considers that condensate polishing system is included or not in PWR and precoatcondensate polishing system, deep bed condensate polishing system in BWR and the 5 waste streams, i. e., compactibIe trash (COTRASH), ion exchange resin (IXRESIN), concentrate liquid (CONCLIQ), filter sludge (FSLUDGE), non compactible trash (COTRASH). This study uses the PVRR and LRR methods to create cost analysis and performs sensitivity analysis for the each cost variables and shows that future burial costs increases are the major factors in the economic evaluation

Polish Semantic Parser

Directory of Open Access Journals (Sweden)

Agnieszka Grudzinska

2000-01-01

Full Text Available Amount of information transferred by computers grows very rapidly thus outgrowing the average man's capability of reception. It implies computer programs increase in the demand for which would be able to perform an introductory classitication or even selection of information directed to a particular receiver. Due to the complexity of the problem, we restricted it to understanding short newspaper notes. Among many conceptions formulated so far, the conceptual dependency worked out by Roger Schank has been chosen. It is a formal language of description of the semantics of pronouncement integrated with a text understanding algorithm. Substantial part of each text transformation system is a semantic parser of the Polish language. It is a module, which as the first and the only one has an access to the text in the Polish language. lt plays the role of an element, which finds relations between words of the Polish language and the formal registration. It translates sentences written in the language used by people into the language theory. The presented structure of knowledge units and the shape of understanding process algorithms are universal by virtue of the theory. On the other hand the defined knowledge units and the rules used in the algorithms ure only examples because they are constructed in order to understand short newspaper notes.

Microbiological flora and nail polish: a brief report.

Science.gov (United States)

Rayan, G M; Flournoy, D J; Schlageter, P

1994-11-01

Removing nail polish and prosthetic nails from operating room (OR) personnel prior to scrubbing and from patients prior to hand surgery is recommended but not practiced in many hospitals. There is concern that nail polish can act as a vehicle for the transfer of infectious agents. This study was designed to determine the incidence of microbiological flora of nail polish in a clinical setting.

Smoking characteristics of Polish immigrants in Dublin.

LENUS (Irish Health Repository)

Kabir, Zubair

2008-01-01

BACKGROUND: This study examined two main hypotheses: a) Polish immigrants\\' smoking estimates are greater than their Irish counterparts (b) Polish immigrants purchasing cigarettes from Poland smoke "heavier" (>\\/= 20 cigarettes a day) when compared to those purchasing cigarettes from Ireland. The study also set out to identify significant predictors of \\'current\\' smoking (some days and everyday) among the Polish immigrants. METHODS: Dublin residents of Polish origin (n = 1,545) completed a previously validated Polish questionnaire in response to an advertisement in a local Polish lifestyle magazine over 5 weekends (July-August, 2007). The Office of Tobacco Control telephone-based monthly survey data were analyzed for the Irish population in Dublin for the same period (n = 484). RESULTS: Age-sex adjusted smoking estimates were: 47.6% (95% Confidence Interval [CI]: 47.3%; 48.0%) among the Poles and 27.8% (95% CI: 27.2%; 28.4%) among the general Irish population (p < 0.001). Of the 57% of smokers (n = 345\\/606) who purchased cigarettes solely from Poland and the 33% (n = 198\\/606) who purchased only from Ireland, 42.6% (n = 147\\/345) and 41.4% (n = 82\\/198) were "heavy" smokers, respectively (p = 0.79). Employment (Odds Ratio [OR]: 2.89; 95% CI: 1.25-6.69), lower education (OR: 3.76; 95%CI: 2.46-5.74), and a longer stay in Ireland (>24 months) were significant predictors of current smoking among the Poles. An objective validation of the self-reported smoking history of a randomly selected sub-sample immigrant group, using expired carbon monoxide (CO) measurements, showed a highly significant correlation coefficient (r = 0.64) of expired CO levels with the reported number of cigarettes consumed (p < 0.0001). CONCLUSION: Polish immigrants\\' smoking estimates are higher than their Irish counterparts, and particularly if employed, with only primary-level education, and are overseas >2 years.

Morbilidad en la consulta de endocrinología del Centro de Investigaciones Medicoquirúrgicas de Angola Morbidity at the Endocrinology outpatient department of the Center for Medicosurgical Research in Angola

Directory of Open Access Journals (Sweden)

Rubén S. Padrón Durán

2006-04-01

Full Text Available Los datos de la morbilidad en consulta externa pueden ser útiles para conocer las causas por las que los pacientes acuden al centro de salud, así como para planificar el ofrecimiento de consultas especiales y de exámenes complementarios. El objetivo de este estudio es presentar y analizar la morbilidad en la consulta externa de endocrinología del Centro de Investigaciones Medicoquirúrgicas de Angola (CIMECA. Se compilaron todos los diagnósticos de cada caso durante 28 meses consecutivos. Los diagnósticos específicos se clasificaron en 7 grandes grupos: 1 alteraciones de la glucemia, 2 obesidad y otros trastornos metabólicos, 3 medicina reproductiva, 4 trastornos del tiroides, 5 endocrinología pediátrica, 6 otras endocrinopatías y 7 sin endocrinopatías. Se atendieron 2 294 pacientes. Los grupos diagnósticos más frecuentes fueron: alteración de la glucemia (60,07 y obesidad y otros trastornos metabólicos (42,07; relativamente frecuentes fueron medicina reproductiva (19,4 y trastornos del tiroides (11,07. Sin embargo, los pacientes de endocrinología pediátrica (1,53 y otras endocrinopatías (0,22 fueron muy poco numerosos. Los diagnósticos específicos más comunes fueron la diabetes mellitus tipo 2 (DM2 y la obesidad exógena (53,01 y 24,72 respectivamente, seguidos por las hiperlipoproteinemias (11,73. En un rango entre 4,5 y 10 % observamos bocio difuso eutiroideo, glucemia en ayunas alterada, infertilidad femenina e hiperuricemia; el resto se halló en menos del 3 % del total de casos. Lo resultados y conclusiones más importantes del estudio son: a Los grupos diagnósticos más comunes fueron las alteraciones de la glucemia y la obesidad y otros trastornos metabólicos, entre ellos la DM2 y la obesidad exógena, b Los diagnósticos de medicina reproductiva y trastornos del tiroides fueron relativamente comunes, c Los trastornos endocrinos en edades pediátricas y otras endocrinopatías fueron muy poco frecuentes, d

Reel-to-reel substrate tape polishing system

Energy Technology Data Exchange (ETDEWEB)

Selvamanickam, Venkat; Gardner, Michael T.; Judd, Raymond D.; Weloth, Martin; Qiao, Yunfei

2005-06-21

Disclosed is a reel-to-reel single-pass mechanical polishing system (100) suitable for polishing long lengths of metal substrate tape (124) used in the manufacture of high-temperature superconductor (HTS) coated tape, including multiple instantiations of a polishing station (114) in combination with a subsequent rinsing station (116) arranged along the axis of the metal substrate tape (124) that is translating between a payout spool (110a) and a take-up spool (110b). The metal substrate tape obtains a surface smoothness that is suitable for the subsequent deposition of a buffer layer.

Rare diseases in clinical endocrinology: a taxonomic classification system.

Science.gov (United States)

Marcucci, G; Cianferotti, L; Beck-Peccoz, P; Capezzone, M; Cetani, F; Colao, A; Davì, M V; degli Uberti, E; Del Prato, S; Elisei, R; Faggiano, A; Ferone, D; Foresta, C; Fugazzola, L; Ghigo, E; Giacchetti, G; Giorgino, F; Lenzi, A; Malandrino, P; Mannelli, M; Marcocci, C; Masi, L; Pacini, F; Opocher, G; Radicioni, A; Tonacchera, M; Vigneri, R; Zatelli, M C; Brandi, M L

2015-02-01

Rare endocrine-metabolic diseases (REMD) represent an important area in the field of medicine and pharmacology. The rare diseases of interest to endocrinologists involve all fields of endocrinology, including rare diseases of the pituitary, thyroid and adrenal glands, paraganglia, ovary and testis, disorders of bone and mineral metabolism, energy and lipid metabolism, water metabolism, and syndromes with possible involvement of multiple endocrine glands, and neuroendocrine tumors. Taking advantage of the constitution of a study group on REMD within the Italian Society of Endocrinology, consisting of basic and clinical scientists, a document on the taxonomy of REMD has been produced. This document has been designed to include mainly REMD manifesting or persisting into adulthood. The taxonomy of REMD of the adult comprises a total of 166 main disorders, 338 including all variants and subtypes, described into 11 tables. This report provides a complete taxonomy to classify REMD of the adult. In the future, the creation of registries of rare endocrine diseases to collect data on cohorts of patients and the development of common and standardized diagnostic and therapeutic pathways for each rare endocrine disease is advisable. This will help planning and performing intervention studies in larger groups of patients to prove the efficacy, effectiveness, and safety of a specific treatment.

Polish Qualitative Sociology: The General Features and Development

OpenAIRE

Konecki, Krzysztof Tomasz; Kacperczyk, Anna; Marciniak, Łukasz

2005-01-01

Forum Qualitative Sozialforschung / Forum: Qualitative Social Research,2005, 6(3) The article explores the development of Polish qualitative sociology in Poland by presenting its main intellectual routes and some of the general features of Polish sociology. Romanticism and inductionmethod are crucial elements for the development of this discipline in Poland and contribute to its. unigueness. The role of Florian Znaniecki in creating the Polish qualitative sociology is also underlined.

Outcome of Doctors Attending the European Society for Paediatric Endocrinology Winter Schools 2008-2014.

Science.gov (United States)

Donaldson, Malcolm D C

2017-01-01

Since 1995, the European Society for Paediatric Endocrinology (ESPE) has hosted Winter School (WS), a 5-day interactive meeting of 25 trainees and 7 teachers designed to cover all main endocrine topics. The aim of the present study was to determine subsequent outcome in ex-WS "students." A questionnaire was sent in August 2016 to all ESPE WS participants between 2008 and 2014. Information was requested on job/training status at WS attendance and in 2016, and subsequent involvement with ESPE. Of 174 participants (144 women, 30 men) including 5 attending two WS, 129 (74.5%) responded. At the time of WS/2016 survey 58/3 participants were junior trainees, 38/21 senior trainees, and 33/101 consultants. One hundred and seventeen (90.6%) responders were still involved with endocrinology, 107 (82%) rating WS as having a strong/very strong influence on their careers. Following WS, 80/174 (46%) participants had attended at least one ESPE main meeting, 28 (16%) had been awarded ESPE fellowships, and 34 (19%) had become ESPE members. The great majority of WS participants responding to the questionnaire are still involved with endocrinology and rated WS as influential. This favourable outcome supports the continuing funding of WS and similar educational programmes. © 2017 S. Karger AG, Basel.

21 CFR 872.6030 - Oral cavity abrasive polishing agent.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Oral cavity abrasive polishing agent. 872.6030... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6030 Oral cavity abrasive polishing agent. (a) Identification. An oral cavity abrasive polishing agent is a device in paste or powder form...

Internalisation of external costs in the Polish power generation sector: A partial equilibrium model

International Nuclear Information System (INIS)

Kudelko, Mariusz

2006-01-01

This paper presents a methodical framework, which is the basis for the economic analysis of the mid-term planning of development of the Polish energy system. The description of the partial equilibrium model and its results are demonstrated for different scenarios applied. The model predicts the generation, investment and pricing of mid-term decisions that refer to the Polish electricity and heat markets. The current structure of the Polish energy sector is characterised by interactions between the supply and demand sides of the energy sector. The supply side regards possibilities to deliver fuels from domestic and import sources and their conversion through transformation processes. Public power plants, public CHP plants, industry CHP plants and municipal heat plants represent the main producers of energy in Poland. Demand is characterised by the major energy consumers, i.e. industry and construction, transport, agriculture, trade and services, individual consumers and export. The relationships between the domestic electricity and heat markets are modelled taking into account external costs estimates. The volume and structure of energy production, electricity and heat prices, emissions, external costs and social welfare of different scenarios are presented. Results of the model demonstrate that the internalisation of external costs through the increase in energy prices implies significant improvement in social welfare

An interactive E-Learning Portal in Pediatric Endocrinology: Practical Experience

Directory of Open Access Journals (Sweden)

Stenvert L. S. Drop

2013-10-01

Full Text Available Based on educational considerations, the European Society for Paediatric Endocrinology (ESPE e-learning portal has been developed, providing an interactive learning environment for up-to-date information in pediatric endocrinology. From March 2011 to January 2012, five small-scale pilot studies were completed to assess the usefulness of the structure and content by senior experts, fellows, residents and medical students. Altogether, 8 cases and 4 chapters were studied by a total of 71 individuals: 18 senior experts, 21 fellows, 10 medical students, 9 regional pediatricians and 13 residents, resulting in a total of 127 evaluations. Participants considered the portal content interesting and appreciated the way of learning compared to traditional learning from literature and textbooks. Special attention was paid to assess the personalized feedback given by experts to fellows and residents who completed the portal. Feedback from experts included both medical understanding and communication skills demonstrated by fellows and residents. Users highly appreciated the feedback of the medical experts, who brought perspectives from another clinic. This portal also offers educational opportunities for medical students and regional pediatricians and can be used to develop various CanMEDS competencies, e.g., medical expert, health advocate, and scholar.

Referring Quality Assessment of Primary Health Care for Endocrinology in Rio Grande do Sul, Brazil.

Science.gov (United States)

Monteiro Grendene, Gabriela; Szczecinski Rodrigues, Átila; Katz, Natan; Harzheim, Erno

2015-01-01

This paper presents results of an assessment of the quality research of endocrinology referrals in the public health system in the state of Rio Grande do Sul. From the analysis of 4,458 requests for endocrinology referrals, it was found that 15% of referrals had insufficient information for evaluation and 71% showed no clinical justification for authorization of referencing. The partial results of the study indicated that the lack of information makes it impossible to clinically regulate these requests. The use of referencing protocols associated with telemedicine tools can assist doctors in primary health care in the clinical management and make access to specialized services more equitable and timely.

Shared decision making in endocrinology: present and future directions.

Science.gov (United States)

Rodriguez-Gutierrez, Rene; Gionfriddo, Michael R; Ospina, Naykky Singh; Maraka, Spyridoula; Tamhane, Shrikant; Montori, Victor M; Brito, Juan P

2016-08-01

In medicine and endocrinology, there are few clinical circumstances in which clinicians can accurately predict what is best for their patients. As a result, patients and clinicians frequently have to make decisions about which there is uncertainty. Uncertainty results from limitations in the research evidence, unclear patient preferences, or an inability to predict how treatments will fit into patients' daily lives. The work that patients and clinicians do together to address the patient's situation and engage in a deliberative dialogue about reasonable treatment options is often called shared decision making. Decision aids are evidence-based tools that facilitate this process. Shared decision making is a patient-centred approach in which clinicians share information about the benefits, harms, and burden of different reasonable diagnostic and treatment options, and patients explain what matters to them in view of their particular values, preferences, and personal context. Beyond the ethical argument in support of this approach, decision aids have been shown to improve patients' knowledge about the available options, accuracy of risk estimates, and decisional comfort. Decision aids also promote patient participation in the decision-making process. Despite accumulating evidence from clinical trials, policy support, and expert recommendations in endocrinology practice guidelines, shared decision making is still not routinely implemented in endocrine practice. Additional work is needed to enrich the number of available tools and to implement them in practice workflows. Also, although the evidence from randomised controlled trials favours the use of this shared decision making in other settings, populations, and illnesses, the effect of this approach has been studied in a few endocrine disorders. Future pragmatic trials are needed to explore the effect and feasibility of shared decision making implementation into routine endocrinology and primary care practice. With the

An Unbiased View of the History of Polish Medical Physics by a Senior Polish Medical Physicist

International Nuclear Information System (INIS)

Chomicki, O. A.

2008-01-01

Here is a story told by Maria Sklodowska-Curie at the meeting of the International Committee of Intellectual Cooperation in 1921: 'In a free literary competition on the role and importance of elephants the Englishman's story was 'My adventures while shooting elephants in South Africa', the Frenchman was more concerned with 'The sexual and erotic life of elephants', while the Polish approach was invariably 'The elephant versus Poland's national independence', which seemed quite understandable in the light of over 120 years when Poland was partitioned and lost its independence. Since then this saying has become proverbial and came to express the unmistakably Polish tendency to see everything in terms of Polish interests. In my remarks and reminiscences on the history of the Polish Society of Medical Physics you will quickly recognize the same tendency. First, I will, among other things, try to open some old cupboards to 'produce good [things] from the store of good' (Matthew 12:35), especially concerning the first few years of the activity in medical physics in Poland, and second, I will draw some conclusions and/or offer suggestions based on what a senior medical physicist has seen for more than 50 years of his activity in this field. (author)

Cannabinoids cases in polish athletes

OpenAIRE

A Pokrywka; Z Obmiński; D Kwiatkowska; R Grucza

2009-01-01

The aim of this study was to investigate the number of cases and the profiles of Polish athletes who had occasionally been using marijuana or hashish throughout the period of 1998-2004, with respect to: sex, age, and discipline of sport as well as the period of testing (in- and out-of-competition). Results of the study were compared with some data reported by other WADA accredited anti-doping laboratories. Totally, 13 631 urine samples taken from Polish athletes of both sexes, aged 10-67 year...

The social shaping of innovation in polish companies

DEFF Research Database (Denmark)

Lorentzen, Anne

2003-01-01

The paper deals with strategies of innovation in Polish manufacturing companies. The point of departure is a theoretical framework of enterprise level innovation, and of the factors forming strategies of innovation on enterprise level. The paper analyses evidence from 23 Polish companies and pres......The paper deals with strategies of innovation in Polish manufacturing companies. The point of departure is a theoretical framework of enterprise level innovation, and of the factors forming strategies of innovation on enterprise level. The paper analyses evidence from 23 Polish companies...... and presents two cases more in detail. The analysis shows that the Polish companies have all been quite innovative, mostly in relation to product innovation. They choose innovation strategies, which are incremental more than radical, and they tend to differentiate their product range rather than to specialise....... They consider quality development a must in the fight for market shares and they adapt equipment and organisation to this goal. The factors forming and determining the strategies of the companies count the technological knowledge and expertise of the owner/founder, the structural changes of the market...

Financial Analysis of Behavioral Health Services in a Pediatric Endocrinology Clinic.

Science.gov (United States)

Yarbro, Jessica L; Mehlenbeck, Robyn

2016-09-01

This article addresses a current need in psychological practice by describing a financially feasible model that moves toward integrated care of behavioral health services in a pediatric endocrinology clinic. Financial information (costs and revenue associated with behavioral health services) for the clinic, over an 18-month period (July 2012 to December 2013), was obtained through the hospital's financial department. The clinic meets one half day per week. Over the 18-month period, the behavioral health services generated a net gain of $3661.45 in the favor of the clinic. We determined that the psychologist and clinical psychology residents needed to see a total of four patients per half-day clinic for the clinic to "break-even." We describe one financially feasible way of integrating behavioral health services into a pediatric endocrinology clinic in the hope that this will be generalizable to other medical settings. © The Author 2015. Published by Oxford University Press on behalf of the Society of Pediatric Psychology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Semi-strong informational efficiency in the Polish foreign exchange market

OpenAIRE

Luksz Goczek

2015-01-01

During the financial crisis a notion that the Polish exchange rate is not determined effectively was very dominant, because of a contagion effect of the global financial crisis on the Polish economy. In addition, many foreign exchange market analysts explained developments in the Polish exchange market trough a hypothesis that the Polish zloty exchange rate follows other exchange rates. This contradicts market efficiency as this would lead to profitable arbitrage possibility based on past inf...

Symmetry or asymmetry? Cross-border openness of service providers in Polish-Czech and Polish-German border towns

Directory of Open Access Journals (Sweden)

Dołzbłasz Sylwia

2015-03-01

Full Text Available The symmetry and/or asymmetry in terms of cross-border openness of service providers is examined in this article, for the cases of two border twin towns: Cieszyn/Český Těšín at the Polish-Czech border, and Gubin/Guben at the Polish-German border. To assess the level of openness of firms towards clients from the other side of the border, four trans-border categories were examined: neighbour’s language visible at store location; business offers in the language of the neighbour; the possibilities of payment in the neighbour’s currency; and the staff’s knowledge of the language. This enabled a comparison of both parts of the particular twin towns in relation to the character of cross-border openness, as well as an assessment of their symmetry/asymmetry. Comparisons of Gubin/Guben and Cieszyn/Český Těšín with respect to the analysed features were also carried out. The analysis shows significant variation in the level of cross-border openness towards clients from neighbouring countries. Whereas in the Polish-Czech town a relative symmetry was observed, in the Polish-German case, significant asymmetry was noted.

Transformation of the Polish Banking Sector

Directory of Open Access Journals (Sweden)

Marek Stefański

2009-07-01

Full Text Available In the post-war period the banking system in Poland underwent two important system transitions: after 1946 and after 1989. The third transformation began after May 1, 2004, but it did not have a systemic character. The Polish banking sector started to operate on the Single European Market. The first part of the paper is devoted to the problems of the banks transformations after 1989 with a special focus on the quantitative development of banks in 19892008, and on subsequent privatisation and consolidation processes. The former intensified in 19891999, and the latter in 19992002. The consolidation process was very noticeable in the sector of cooperative banks after 1994. The second part of the paper includes an economic and financial analysis of the banks. A lot of attention was paid to the liquidity of the banking sector. It was assessed as good, which was confirmed by a short-term rating of Moodys and by the Financial Stability Report 2009, published by the National Bank of Poland in June 2009. The comparison of the net profit of the banking sector in 19972008 shows its dependence on the economic situation and policy. The number of banks with capital adequacy ratio well above the minimum required by the banking supervision is rising. The financial power ratings are not favorable for the domestic banks. The third part of the paper focuses on the development directions of the Polish banking sector. It may be concluded on the basis of the analysis that privatisation and consolidation processes will be continued. They will concentrate on the capital of foreign banks already operating in Poland. As compared with individual foreign banks, the potential of the Polish banking sector is week. The fourth part of the paper focuses on the presentation Polish banking sector in the context of European Union banking sector. The paper finishes with conclusions. Generally, Polish banks have to implement a strategy to enable them to compete on the Single

Effect of Polishing Systems on Surface Roughness and Topography of Monolithic Zirconia.

Science.gov (United States)

Goo, C L; Yap, Auj; Tan, Kbc; Fawzy, A S

2016-01-01

This study evaluated the effect of different chairside polishing systems on the surface roughness and topography of monolithic zirconia. Thirty-five monolithic zirconia specimens (Lava PLUS, 3M ESPE) were fabricated and divided into five groups of seven and polished with the following: Group 1 (WZ)-Dura white stone followed by Shofu zirconia polishing kit; Group 2 (SZ)-Shofu zirconia polishing kit; Group 3 (CE)-Ceramiste porcelain polishers; Group 4 (CM)-Ceramaster porcelain polishers; and Group 5 (KZ)-Komet ZR zirconia polishers. All specimens were ground with a fine-grit diamond bur prior to polishing procedures to simulate clinical finishing. Baseline and post-polishing profilometric readings were recorded and delta Ra values (difference in mean surface roughness before and after polishing) were computed and analyzed using one-way analysis of variance and Scheffe post hoc test (pSEM) images of the ground but unpolished and polished specimens were acquired. Delta Ra values ranged from 0.146 for CE to 0.400 for KZ. Delta Ra values for KZ, WZ, and SZ were significantly greater than for CE. Significant differences in delta Ra values were also observed between KZ and CM. The SEM images obtained were consistent with the profilometric findings. Diamond-impregnated polishing systems were more effective than silica carbide-impregnated ones in reducing the surface roughness of ground monolithic zirconia.

Simulation and analysis of an alternative kinematics for improving the polishing uniformity over the surface of polished tiles

Directory of Open Access Journals (Sweden)

Weingaertner, W. L.

2010-10-01

Full Text Available The present work investigates the possibility of adopting a new kinematics at the industrial polishing lines of porcelain stoneware tile. An alternative motion of the transverse oscillation of the polishing heads is proposed, in which no radical changes in the industries facilities are required. The basic idea is to replace the purely sinus motion of the polishing heads by a rather trapezoid wavelike motion. In theory this could be achieved simply by adopting regular delays at the transverse oscillation motion. Consequences of this alternative kinematics were quantitatively analyzed considering the spatial homogeneity of polishing expected for tiles. Such homogeneity was represented by the coefficient of variation of the distribution of polishing time over the surface, which was in turn determined by means of computational simulations, taking into account the effect of multiple polishing heads.

El presente trabajo investiga la posibilidad de adoptar una nueva cinemática en las líneas de pulido industrial de baldosas de gres porcelánico. Se propone una propuesta alternativa de la oscilación transversal de los cabezales pulidores, en el que no hay cambios radicales en las instalaciones de las industrias son necesarias. La idea básica consiste en sustituir el movimiento totalmente del seno de los cabezales pulidores por un movimiento ondulatorio trapezoide. En teoría, esto podría lograrse sólo mediante la adopción de los habituales retrasos en el movimiento de oscilación transversal. las consecuencias de esta cinemática fueron analizados cuantitativamente, teniendo en cuenta la homogeneidad espacial de pulido. Tal homogeneidad fora representada por el coeficiente de variación de la distribución de lo tiempo de pulido en la superficie, determinada por medio de simulaciones computacionales, teniendo también en cuenta el efecto de pulido de las cabezas múltiples.

Trends in the study of the comparative endocrinology of reproduction in vertebrates

NARCIS (Netherlands)

Oordt, G.J. van

1962-01-01

A couple of months ago the organizers of the present Conference asked me to deliver an opening address, which would review the development of comparative endocrinology in Europe, particularly with reference to my own work and experiences. Of course I accepted this invitation with very much

Cannabinoids cases in polish athletes

Directory of Open Access Journals (Sweden)

A Pokrywka

2009-07-01

Full Text Available The aim of this study was to investigate the number of cases and the profiles of Polish athletes who had occasionally been using marijuana or hashish throughout the period of 1998-2004, with respect to: sex, age, and discipline of sport as well as the period of testing (in- and out-of-competition. Results of the study were compared with some data reported by other WADA accredited anti-doping laboratories. Totally, 13 631 urine samples taken from Polish athletes of both sexes, aged 10-67 years, performing 46 disciplines of sport were tested. Cannabinoids were detected in 267 samples. Among Polish athletes the relative number of positive THC (tetrahydrocannabinol samples was one of the highest in Europe. The group of young Polish athletes (aged 16-24 years was the most THC-positive. THC-positive cases were noted more frequently in male athletes tested during out of competitions. The so-called contact sports (rugby, ice hockey, skating, boxing, badminton, body building and acrobatic sports were those sports, where the higher risk of cannabis use was observed. The legal interpretation of some positive cannabinoids results would be difficult because of some accidental and unintentional use of the narcotics by sportsmen. It was concluded that national anti-doping organizations (NADO’s, which are competent to judge whether the anti-doping rules were violated, should take into account the possibility of non-intentional doping use of cannabinoids via passive smoking of marijuana.

Composite adaptive control of belt polishing force for aero-engine blade

Science.gov (United States)

Zhsao, Pengbing; Shi, Yaoyao

2013-09-01

The existing methods for blade polishing mainly focus on robot polishing and manual grinding. Due to the difficulty in high-precision control of the polishing force, the blade surface precision is very low in robot polishing, in particular, quality of the inlet and exhaust edges can not satisfy the processing requirements. Manual grinding has low efficiency, high labor intensity and unstable processing quality, moreover, the polished surface is vulnerable to burn, and the surface precision and integrity are difficult to ensure. In order to further improve the profile accuracy and surface quality, a pneumatic flexible polishing force-exerting mechanism is designed and a dual-mode switching composite adaptive control(DSCAC) strategy is proposed, which combines Bang-Bang control and model reference adaptive control based on fuzzy neural network(MRACFNN) together. By the mode decision-making mechanism, Bang-Bang control is used to track the control command signal quickly when the actual polishing force is far away from the target value, and MRACFNN is utilized in smaller error ranges to improve the system robustness and control precision. Based on the mathematical model of the force-exerting mechanism, simulation analysis is implemented on DSCAC. Simulation results show that the output polishing force can better track the given signal. Finally, the blade polishing experiments are carried out on the designed polishing equipment. Experimental results show that DSCAC can effectively mitigate the influence of gas compressibility, valve dead-time effect, valve nonlinear flow, cylinder friction, measurement noise and other interference on the control precision of polishing force, which has high control precision, strong robustness, strong anti-interference ability and other advantages compared with MRACFNN. The proposed research achieves high-precision control of the polishing force, effectively improves the blade machining precision and surface consistency, and

Monitoring of Robot Assisted Polishing through parameters of acoustic emission

DEFF Research Database (Denmark)

Lazarev, Ruslan; Top, Søren; Bilberg, Arne

The polishing process is essential for the surface generation of machine tooling components in advanced manufacturing. While robot assisted polishing is faster and more consistent than manual polishing, it can still consume a significant part of ma- chining time and operator presence time...

Trace element analysis of nail polishes

International Nuclear Information System (INIS)

Misra, G.; Mittal, V.K.; Sahota, H.S.

1999-01-01

Instrumental neutron activation analysis (INAA) technique was used to measure the concentrations of various trace elements in nail polishes of popular Indian and foreign brands. The aim of the present experiment was to see whether trace elements could distinguish nail polishes of different Indian and foreign brands from forensic point of view. It was found that cesium can act as a marker to differentiate foreign and Indian brands. (author)

Factors influencing the surface quality of polished tool steels

International Nuclear Information System (INIS)

Rebeggiani, S; Rosén, B-G

2014-01-01

Today’s demands on surface quality of moulds for injection moulding of plastic components involve no/low defect contents and roughness levels in the nm-range for high gloss applications. Material properties as well as operating conditions influence the mould finish, and thus the final surface of moulded products. This paper focuses on how particle content and different polishing strategies influence final surface qualities of moulds. Visual estimations of polished tool steel samples were combined with non-contact 3D-surface texture analysis in order to correlate traditional assessments to more quantitative methods, and to be able to analyse the surfaces at nanometre-level. It was found that steels with a lower proportion of particles, like carbides and oxides, gave rise to smoother polished surfaces. In a comparative study of polishers from different polishing shops, it was found that while different surface preparation strategies can lead to similar final roughness, similar preparation techniques can produce high-quality surfaces from different steel grades. However, the non-contact 3D-surface texture analysis showed that not all smooth polished surfaces have desirable functional topographies for injection moulding of glossy plastic components. (paper)

New perspectives in hydrodynamic radial polishing techniques for optical surfaces

Science.gov (United States)

Ruiz, Elfego; Sohn, Erika; Luna, Esteban; Salas, Luis; Cordero, Alberto; González, Jorge; Núñez, Manuel; Salinas, Javier; Cruz-González, Irene; Valdés, Jorge; Cabrera, Victor; Martínez, Benjamín

2004-09-01

In order to overcome classic polishing techniques, a novel hydrodynamic radial polishing tool (HyDRa) is presented; it is useful for the corrective lapping and fine polishing of diverse materials by means of a low-cost abrasive flux and a hydrostatic suspension system that avoids contact of the tool with the working surface. This tool enables the work on flat or curved surfaces of currently up to two and a half meters in diameter. It has the advantage of avoiding fallen edges during the polishing process as well as reducing tool wear out and deformation. The functioning principle is based on the generation of a high-velocity, high-pressure, abrasive emulsion flux with radial geometry. The polishing process is repeatable by means of the control of the tool operational parameters, achieving high degrees of precision and accuracy on optical and semiconductor surfaces, with removal rates of up to 9 mm3/hour and promising excellent surface polishing qualities. An additional advantage of this new tool is the possibility to perform interferometric measurements during the polishing process without the need of dismounting the working surface. A series of advantages of this method, numerical simulations and experimental results are described.

Endocrinological analysis of 122 Japanese childhood cancer survivors in a single hospital

International Nuclear Information System (INIS)

Miyoshi, Yoko; Ohta, Hideaki; Hashii, Yoshiko; Tokimasa, Sadao; Namba, Noriyuki; Mushiake, Sotaro; Ozono, Keiichi; Hara, Junichi

2008-01-01

With recent improvements in the diagnosis and treatment of cancer, the number of childhood cancer survivors (CCSs) has been increasing in Japan. The importance of quality of life during the lifetime of CCSs has now been recognized, and the late effects of cancer treatments are essential and important issues. In this study we analyzed the endocrinological abnormalities of CCSs by retrospectively evaluating 122 outpatients (62 males and 60 females) who had been referred from pediatric oncologists to our follow-up clinic among 151 CCSs attending our hospital more than two years after their cancer treatment. Follow-up duration varied from 2 to 30 (median 8.0) years. Their average age was 17.3 (range 4-36, median 17.0) years, and 38 patients (31.1%) reached adulthood. Endocrinological abnormalities were found in 82 (67%) of 122 survivors. Gonadal dysfunction was observed in 60 patients (49%). Thirty-nine patients (32%) were short or grew at a slower rate. Twenty-six patients (21%) showed thyroid dysfunction. Other abnormalities were as follows: obesity in 20 patients (16%), leanness in 10 (8%), central diabetes insipidus in 11 (9%) and adrenocortical dysfunction in 9 (7%). Low bone mineral density was observed in 41 (42%) of 98 patients evaluated. These endocrinological abnormalities were caused by the combined effects of cancer itself and various treatments (chemotherapy, radiation therapy, surgery, and hematopoietic stem cell transplantation). Lifetime medical surveillance and continuous follow-up are necessary for CCSs, because treatment-related complications may occur during childhood and many years after the therapy as well. Endocrinologists should participate in long-term follow-up of these survivors in collaboration with pediatric oncologists. (author)

Endocrinological analysis of 122 Japanese childhood cancer survivors in a single hospital.

Science.gov (United States)

Miyoshi, Yoko; Ohta, Hideaki; Hashii, Yoshiko; Tokimasa, Sadao; Namba, Noriyuki; Mushiake, Sotaro; Hara, Junichi; Ozono, Keiichi

2008-12-01

With recent improvements in the diagnosis and treatment of cancer, the number of childhood cancer survivors (CCSs) has been increasing in Japan. The importance of quality of life during the lifetime of CCSs has now been recognized, and the late effects of cancer treatments are essential and important issues. In this study we analyzed the endocrinological abnormalities of CCSs by retrospectively evaluating 122 outpatients (62 males and 60 females) who had been referred from pediatric oncologists to our follow-up clinic among 151 CCSs attending our hospital more than two years after their cancer treatment. Follow-up duration varied from 2 to 30 (median 8.0) years. Their average age was 17.3 (range 4-36, median 17.0) years, and 38 patients (31.1%) reached adulthood. Endocrinological abnormalities were found in 82 (67%) of 122 survivors. Gonadal dysfunction was observed in 60 patients (49%). Thirty-nine patients (32%) were short or grew at a slower rate. Twenty-six patients (21%) showed thyroid dysfunction. Other abnormalities were as follows: obesity in 20 patients (16%), leanness in 10 (8%), central diabetes insipidus in 11 (9%) and adrenocortical dysfunction in 9 (7%). Low bone mineral density was observed in 41 (42%) of 98 patients evaluated. These endocrinological abnormalities were caused by the combined effects of cancer itself and various treatments (chemotherapy, radiation therapy, surgery, and hematopoietic stem cell transplantation). Lifetime medical surveillance and continuous follow-up are necessary for CCSs, because treatment-related complications may occur during childhood and many years after the therapy as well. Endocrinologists should participate in long-term follow-up of these survivors in collaboration with pediatric oncologists.

The regeneration test of the secondary loop condensate polishing mixed bed resin in Qinshan NPP

International Nuclear Information System (INIS)

Xu Meijing; Dong Liming

1995-12-01

There are four condensate polishing mixed beds in the water chemical treatment plant of Qinshan NPP. 2125 kg of D001-TR type cation exchange resin, 2000 kg of D201-TR type anion exchange resin, and 375 kg of S-TR type inert resin are filled into each mixed bed. The bed height of resin is 1.2 m and the volume is about 2.7 m 3 . In order to regenerate the exhausted resin out of the bed, the pre-designed condensate polishing mixed bed regeneration process was used to regenerate the first exhausted resin. After the resin was scrubbed and separated, cation resin and anion resin were respectively regenerated, rinsed to resume the exchange capability of the resin. The regenerated mixed bed is able to keep higher efficiency for condensate polishing. The outlet water quality and the resin service-life are able to meet the design requirements or more favorable than that. During the test, some main cations and anions in the blow-off water at each procedure were analyzed. The analyzed results were used to make pre-designed regeneration process better. The test results proved that pre-designed process is reasonable and effective. (6 refs., 6 figs., 7 tabs.)

Damage-free polishing of monocrystalline silicon wafers without chemical additives

International Nuclear Information System (INIS)

Biddut, A.Q.; Zhang, L.C.; Ali, Y.M.; Liu, Z.

2008-01-01

This investigation explores the possibility and identifies the mechanism of damage-free polishing of monocrystalline silicon without chemical additives. Using high resolution electron microscopy and contact mechanics, the study concludes that a damage-free polishing process without chemicals is feasible. All forms of damages, such as amorphous Si, dislocations and plane shifting, can be eliminated by avoiding the initiation of the β-tin phase of silicon during polishing. When using 50 nm abrasives, the nominal pressure to achieve damage-free polishing is 20 kPa

Pertussis outbreak in Polish shooters with adverse event analysis

Directory of Open Access Journals (Sweden)

Monika Skrzypiec-Spring

2017-04-01

Full Text Available In addition to different injuries, infections are the most common reason for giving up training altogether or reducing its volume and intensity, as well as a lack of opportunities to participate in sports competitions. Nowadays, a slow but constant re‑emergence of pertussis, especially among teenagers and young adults, including athletes, can be observed. This paper describes an outbreak of pertussis among professional Polish shooters, focusing on the transmission of Bordetella pertussis infection between members of the national team, its influence on performance capacity and adverse event analysis. From 9 June, 2015 to 31 July, 2015, a total of 4 confirmed and suspected cases of pertussis were reported among members of the Polish Sport Shooting National Team, their relatives and acquaintances. Pertussis significantly decreased exercise performance of the first athlete, a 35-year-old woman, interrupted her training, and finally resulted in failure to win a medal or quota place. Pertussis also significantly decreased performance of the second athlete, a 25-year-old shooter. The other cases emerged in their families. Whooping cough is a real threat to athletes and should be prevented. Preventive measures include appropriate immunization, constant medical supervision, as well as early isolation, diagnostic tests and treatment of all infected sport team members. Regular administration of booster doses of the acellular pertussis vaccine (Tdpa every 5 years seems reasonable.

Computer-Controlled Cylindrical Polishing Process for Large X-Ray Mirror Mandrels

Science.gov (United States)

Khan, Gufran S.; Gubarev, Mikhail; Speegle, Chet; Ramsey, Brian

2010-01-01

We are developing high-energy grazing incidence shell optics for hard-x-ray telescopes. The resolution of a mirror shells depends on the quality of cylindrical mandrel from which they are being replicated. Mid-spatial-frequency axial figure error is a dominant contributor in the error budget of the mandrel. This paper presents our efforts to develop a deterministic cylindrical polishing process in order to keep the mid-spatial-frequency axial figure errors to a minimum. Simulation software is developed to model the residual surface figure errors of a mandrel due to the polishing process parameters and the tools used, as well as to compute the optical performance of the optics. The study carried out using the developed software was focused on establishing a relationship between the polishing process parameters and the mid-spatial-frequency error generation. The process parameters modeled are the speeds of the lap and the mandrel, the tool s influence function, the contour path (dwell) of the tools, their shape and the distribution of the tools on the polishing lap. Using the inputs from the mathematical model, a mandrel having conical approximated Wolter-1 geometry, has been polished on a newly developed computer-controlled cylindrical polishing machine. The preliminary results of a series of polishing experiments demonstrate a qualitative agreement with the developed model. We report our first experimental results and discuss plans for further improvements in the polishing process. The ability to simulate the polishing process is critical to optimize the polishing process, improve the mandrel quality and significantly reduce the cost of mandrel production

Strain-free polished channel-cut crystal monochromators: a new approach and results

Science.gov (United States)

Kasman, Elina; Montgomery, Jonathan; Huang, XianRong; Lerch, Jason; Assoufid, Lahsen

2017-08-01

The use of channel-cut crystal monochromators has been traditionally limited to applications that can tolerate the rough surface quality from wet etching without polishing. We have previously presented and discussed the motivation for producing channel cut crystals with strain-free polished surfaces [1]. Afterwards, we have undertaken an effort to design and implement an automated machine for polishing channel-cut crystals. The initial effort led to inefficient results. Since then, we conceptualized, designed, and implemented a new version of the channel-cut polishing machine, now called C-CHiRP (Channel-Cut High Resolution Polisher), also known as CCPM V2.0. The new machine design no longer utilizes Figure-8 motion that mimics manual polishing. Instead, the polishing is achieved by a combination of rotary and linear functions of two coordinated motion systems. Here we present the new design of C-CHiRP, its capabilities and features. Multiple channel-cut crystals polished using the C-CHiRP have been deployed into several beamlines at the Advanced Photon Source (APS). We present the measurements of surface finish, flatness, as well as topography results obtained at 1-BM of APS, as compared with results typically achieved when polishing flat-surface monochromator crystals using conventional polishing processes. Limitations of the current machine design, capabilities and considerations for strain-free polishing of highly complex crystals are also discussed, together with an outlook for future developments and improvements.

Can Reduced-Step Polishers Be as Effective as Multiple-Step Polishers in Enhancing Surface Smoothness?

Science.gov (United States)

Kemaloglu, Hande; Karacolak, Gamze; Turkun, L Sebnem

2017-02-01

The aim of this study was to evaluate the effects of various finishing and polishing systems on the final surface roughness of a resin composite. Hypotheses tested were: (1) reduced-step polishing systems are as effective as multiple-step systems on reducing the surface roughness of a resin composite and (2) the number of application steps in an F/P system has no effect on reducing surface roughness. Ninety discs of a nano-hybrid resin composite were fabricated and divided into nine groups (n = 10). Except the control, all of the specimens were roughened prior to be polished by: Enamel Plus Shiny, Venus Supra, One-gloss, Sof-Lex Wheels, Super-Snap, Enhance/PoGo, Clearfil Twist Dia, and rubber cups. The surface roughness was measured and the surfaces were examined under scanning electron microscope. Results were analyzed with analysis of variance and Holm-Sidak's multiple comparisons test (p One-gloss, Enamel Plus Shiny, and Venus Supra groups. (1) The number of application steps has no effect on the performance of F/P systems. (2) Reduced-step polishers used after a finisher can be preferable to multiple-step systems when used on nanohybrid resin composites. (3) The effect of F/P systems on surface roughness seems to be material-dependent rather than instrument- or system-dependent. Reduced-step systems used after a prepolisher can be an acceptable alternative to multiple-step systems on enhancing the surface smoothness of a nanohybrid composite; however, their effectiveness depends on the materials' properties. (J Esthet Restor Dent 29:31-40, 2017). © 2016 Wiley Periodicals, Inc.

Blood Glucose Monitoring as a Teaching Tool for Endocrinology: A New Perspective

Science.gov (United States)

Moats, Robert K., II

2009-01-01

The education of new allied health professionals and nurses in proper endocrine evaluation and care has become critical in recent years, especially considering the greatly increased prevalence of diabetes in adults and children. The evaluation of blood glucose levels in human volunteers over time is a powerful teaching tool for endocrinology that…

Surface geometry of three packable and one hybrid composite after polishing.

Science.gov (United States)

Jung, Martin; Bruegger, Hilka; Klimek, Joachim

2003-01-01

This study evaluated the surface quality of four composite materials after polishing with six different polishing techniques. Eighty specimens were made using three packable composites (Definite/Degussa, SureFil/ Dentsply and Solitaire/Heraeus-Kulzer) and one hybrid composite (Herculite XRV/Kerr). Five specimens of each material were polished using flexible Sof-Lex discs. The remaining 75 specimens of each composite were prepared using three finishing protocols: a single 30 microm diamond (n = 25), two finishing diamonds (30/20 microm; n = 25) and a 30 microm diamond followed by a tungsten carbide finishing bur (n = 25). Final polishing of each of the three finishing groups was accomplished with SuperBuff, Diafix-oral, OneGloss, Astropol and HaWe Composite Polishers (n = 5, each). Surface roughness was evaluated quantitatively by laser-stylus profilometry. Average roughness (R(a)) was calculated; statistical analysis of the data was performed with two-way ANOVA and Scheffé post-hoc tests. The polished surfaces were examined qualitatively by SEM. The results showed significant effects on surface roughness from the different composites (p = 0.011) and polishing systems (p < 0.001). After polishing, the Solitaire surfaces (R(a) = 0.72 microm) were smoother than Definite (R(a) = 0.87 microm) and SureFil (R(a) = 0.89 microm) and significantly smoother than Herculite (R(a) = 0.92 microm; p = 0.011). Three of the polishing methods (SuperBuff, Diafix-oral and Astropol) achieved lower R(a)-values than Sof-Lex discs. The polishing quality of the one-step systems SuperBuff and Diafix-oral was strongly affected by the initial finishing protocol.

Study of Profile Changes during Mechanical Polishing using Relocation Profilometry

Science.gov (United States)

Kumaran, S. Chidambara; Shunmugam, M. S.

2017-10-01

Mechanical polishing is a finishing process practiced conventionally to enhance quality of surface. Surface finish is improved by mechanical cutting action of abrasive particles on work surface. Polishing is complex in nature and research efforts have been focused on understanding the polishing mechanism. Study of changes in profile is a useful method of understanding behavior of the polishing process. Such a study requires tracing same profile at regular process intervals, which is a tedious job. An innovative relocation technique is followed in the present work to study profile changes during mechanical polishing of austenitic stainless steel specimen. Using special locating fixture, micro-indentation mark and cross-correlation technique, the same profile is traced at certain process intervals. Comparison of different parameters of profiles shows the manner in which metal removal takes place in the polishing process. Mass removal during process estimated by the same relocation technique is checked with that obtained using weight measurement. The proposed approach can be extended to other micro/nano finishing processes and favorable process conditions can be identified.

Development of hybrid fluid jet/float polishing process

Science.gov (United States)

Beaucamp, Anthony T. H.; Namba, Yoshiharu; Freeman, Richard R.

2013-09-01

On one hand, the "float polishing" process consists of a tin lap having many concentric grooves, cut from a flat by single point diamond turning. This lap is rotated above a hydrostatic bearing spindle of high rigidity, damping and rotational accuracy. The optical surface thus floats above a thin layer of abrasive particles. But whilst surface texture can be smoothed to ~0.1nm rms (as measured by atomic force microscopy), this process can only be used on flat surfaces. On the other hand, the CNC "fluid jet polishing" process consists of pumping a mixture of water and abrasive particles to a converging nozzle, thus generating a polishing spot that can be moved along a tool path with tight track spacing. But whilst tool path feed can be moderated to ultra-precisely correct form error on freeform optical surfaces, surface finish improvement is generally limited to ~1.5nm rms (with fine abrasives). This paper reports on the development of a novel finishing method, that combines the advantages of "fluid jet polishing" (i.e. freeform corrective capability) with "float polishing" (i.e. super-smooth surface finish of 0.1nm rms or less). To come up with this new "hybrid" method, computational fluid dynamic modeling of both processes in COMSOL is being used to characterize abrasion conditions and adapt the process parameters of experimental fluid jet polishing equipment, including: (1) geometrical shape of nozzle, (2) position relative to the surface, (3) control of inlet pressure. This new process is aimed at finishing of next generation X-Ray / Gamma Ray focusing optics.

Endocrinología en la Javeriana. Recuerdos de una época.

Directory of Open Access Journals (Sweden)

Alfredo Jácome Roca

2001-08-01

Full Text Available

La Facultad de Medicina de la Universidad Javeriana enseñó clínicas durante sus primeros 25 años de existencia en hospitales tradicionales de Bogotá tales como el San José, la Samaritana y el Instituto de Cancerología. La medicina en adultos era manejada por internistas generales como De Zubiría o Carrizosa o por cardiólogos como Consuegra.

Poca cabida había para especialistas, los que con el tiempo empezaron a llegar del exterior. Cuando el Hospital San José se encargaba de la docencia en Medicina Interna, allí se rotaba por el servicio de endocrinología donde se formó como endocrinólogo el doctor Julio Gómez Afanador, quien ha sido casi que el secretario perpetuo de la Sociedad Colombiana de Endocrinología y quien es coautor de muchos de los estudios de bocio endémico y crecimiento producidos por este servicio; en 1965 él organizó una consulta de endocrinología en el Hospital San Ignacio, que a partir de 1968 empecé a dirigir.

La endocrinología se enseñaba poco, que recuerde; hubo clases de fisiología endocrina por Hernán Mendoza y algunas pocas charlas que sobre el tema nos dio Bernardo Reyes en la Samaritana. Con mi amigo y colega Alvaro Mesa resolvimos indagar en un tema que se había puesto de moda merced a las investigaciones de los inmunólogos ingleses Deborah Doniach y su asociado el doctor Roitt: la autoinmunidad tiroidea.

El Instituto de Cancerología nos pareció el sitio adecuado para trabajar en este proyecto que serviría para nuestra tesis de grado pues convocamos el grupo liderado por Jaime Cortázar, quien contaba con Efraím Otero como su asociado y a Jaime Ahumada como residente. Ellos habían sido pioneros en el manejo de los isótopos radioactivos en Colombia y el hecho de que aplicaran una novedosa e impactante tecnología, la gamagrafía en el diagnóstico tiroideo, les daba una aureola de científicos que sin duda nos atrajo.

Tomando sueros de pacientes de su nutrida

Sensory factors affecting female consumers' acceptability of nail polish.

Science.gov (United States)

Sun, C; Koppel, K; Adhikari, K

2015-12-01

The objectives of this study were to determine what sensory factors impact consumers' acceptability of nail polishes, to explore how these sensory factors impact consumers' acceptability of nail polishes, to investigate whether there are any consumer segments according to their overall acceptability on different nail polishes and to scrutinize how the consumer segments are related to the sensory factors. Ninety-eight females participated in a nail polish consumer study at Kansas State University. Eight commercial products belonging to four categories - regular (REG), gel (GEL), flake (FLK) and water-based (WAT) - were evaluated. Each nail polish sample was evaluated twice by each participant in two different tasks - a task devoted to applying and evaluating the product and a task devoted to observing the appearance and evaluating the product. Pearson's correlation analysis, analysis of variance (ANOVA), external preference mapping, cluster analysis and internal preference mapping were applied for data analysis. Participants' scores of overall liking of the nail polishes were similar in the application task and in the observation task. In general, participants liked the REG and GEL product samples more than the FLK and WAT samples. Among all the sensory attributes, appearance attributes were the major factors that affected participants' overall liking. Aroma seemed to be a minor factor to participants' overall liking. Some sensory attributes, such as runny, shininess, opacity, spreadability, smoothness, coverage and wet appearance, were found to drive participants' overall acceptability positively, whereas others such as pinhole, fatty-edges, blister, brushlines, pearl-like, flake-protrusion, glittery and initial-drag impacted participants' overall acceptability negatively. Four clusters of participants were identified according to their overall liking scores from both the application task and the observation task. Participants' acceptability, based on different

Endocrinological and Cardiological Late Effects Among Survivors of Childhood Acute Lymphoblastic Leukemia

Directory of Open Access Journals (Sweden)

Hale Ören

2013-09-01

Full Text Available Objective: Survival rates for childhood acute lymphoblastic leukemia (ALL have significantly improved and late effects of therapy have been important in the follow-up of survivors. The objective of this study is to identify the endocrinological and cardiological late effects of ALL patients treated in our pediatric hematology unit. Materials and Methods: Patients treated for ALL with BFM protocols after at least 5 years of diagnosis and not relapsed were included in the study. Endocrinological late effects (growth failure, obesity, insulin resistance, dyslipidemia, thyroid gland disorders, osteopenia/osteoporosis, and pubertal disorders and cardiological late effects were evaluated. The study group was evaluated with anthropometric measurements, body mass index, and laboratory testing of fasting glucose, insulin, serum lipids, thyroid functions, and bone mineral densities. Echocardiography and pulsed wave Doppler imaging were performed for analysis of cardiac functions. Results: Of the 38 ALL survivors, at least 1 adverse event occurred in 23 (60%, with 8 of them (21% having multiple problems. Six (16% of the survivors were obese and 8 (21% of them were overweight. Subjects who were overweight or obese at the time of diagnosis were more likely to be overweight or obese at last follow-up. Obesity was more frequently determined in patients who were younger than 6 years of age at the time of diagnosis. Insulin resistance was observed in 8 (21% subjects. Insulin resistance was more frequently seen in subjects who had family history of type 2 diabetes mellitus. Hyperlipidemia was detected in 8 (21% patients. Hypothyroidism or premature thelarche were detected in 2 children. Two survivors had osteopenia. Cardiovascular abnormalities occurred in one of the subjects with hypertension and cardiac diastolic dysfunction. Conclusion: We point out the necessity of follow-up of these patients for endocrinological and cardiological late effects, since at least

Note on the polishing of small spheres of ferrimagnetic materials

Energy Technology Data Exchange (ETDEWEB)

Grunberg, J. G.; Antier, G. [Centre d' etudes nucleaires de Grenoble - C.E.N.G. (France); Seiden, P. E. [Institut Fourier, Universite de Grenoble (France)

1961-07-01

This note describes a simple and rapid method that we have used for obtaining a high degree of polish on spheres of ferrimagnetic materials. A high surface polish is of particular importance if one desires to perform ferrimagnetic resonance experiments on very narrow linewidth materials such as Yttrium Iron Garnet. It is not possible to obtain the very narrow linewidths without polishing the sample with a very fine abrasive such as 'Linde A'. Although the methods presently used for the fine polishing of ferrite spheres give satisfactory results, the method described here is of particular interest because of its simplicity and speed. For example with the air-jet tumbling technique it can take as long as three days of polishing to obtain an acceptable surface while our method will give the same results in one to two hours. (author)

Polish energy-system modernisation

International Nuclear Information System (INIS)

Drozdz, M.

2003-01-01

The Polish energy-system needs intensive investments in new technologies, which are energy efficient, clean and cost effective. Since the early 1990s, the Polish economy has had practically full access to modern technological devices, equipment and technologies. Introducing new technologies is a difficult task for project teams, constructors and investors. The author presents a set of principles for project teams useful in planning and energy modernisation. Several essential features are discussed: Energy-efficient appliances and systems; Choice of energy carriers, media and fuels; Optimal tariffs, maximum power and installed power; Intelligent, integrated, steering systems; Waste-energy recovery; Renewable-energy recovery. In practice there are several difficulties connected with planning and realising good technological and economic solutions. The author presents his own experiences of energy-system modernisation of industrial processes and building new objects. (Author)

Initial polishing time affects gloss retention in resin composites.

Science.gov (United States)

Waheeb, Nehal; Silikas, Nick; Watts, David

2012-10-01

To determine the effect of finishing and polishing time on the surface gloss of various resin-composites before and after simulated toothbrushing. Eight representative resin-composites (Ceram X mono, Ceram X duo, Tetric EvoCeram, Venus Diamond, EsteliteSigma Quick, Esthet.X HD, Filtek Supreme XT and Spectrum TPH) were used to prepare 80 disc-shaped (12 mm x 2 mm) specimens. The two step system Venus Supra was used for polishing the specimens for 3 minutes (Group A) and 10 minutes (Group B). All specimens were subjected to 16,000 cycles of simulated toothbrushing. The surface gloss was measured after polishing and after brushing using the gloss meter. Results were evaluated using one way ANOVA, two ways ANOVA and Dennett's post hoc test (P = 0.05). Group B (10-minute polishing) resulted in higher gloss values (GV) for all specimens compared to Group A (3 minutes). Also Group B showed better gloss retention compared to Group A after simulated toothbrushing. In each group, there was a significant difference between the polished composite resins (P gloss after the simulated toothbrushing.

Sexual Health of Polish Athletes with Disabilities

Directory of Open Access Journals (Sweden)

Ryszard Plinta

2015-06-01

Full Text Available The purpose of this study was to determine sexual functioning of Polish athletes with disabilities (including paralympians. The study encompassed 218 people with physical disabilities, aged between 18 and 45 (149 men and 69 women. The entire research population was divided into three groups: Polish paralympians (n = 45, athletes with disabilities (n = 126 and non-athletes with disabilities (n = 47. The quality of sexual life of Polish paralympians was measured by using the Polish version of Female Sexual Function Index and International Index of Erectile Function. Clinically significant erectile dysfunctions were most often diagnosed in non-athletes (83.33% with 50% result of severe erectile dysfunctions, followed by athletes and paralympians with comparable results of 56.98% and 54.17% respectively (p = 0.00388. Statistically significant clinical sexual dysfunctions concerned lubrication, orgasm as well as pain domains, and prevailed among female non-athletes (68.42%, 68.42% and 57.89%. Practising sports at the highest level has a favourable effect on the sexuality of men and women with physical disabilities. Men with physical disabilities manifest more sexual disorders than women, an aspect which should be considered by health-care professionals working with people with disabilities.

Consensus statement for use and technical requirements of thyroid ultrasound in endocrinology units.

Science.gov (United States)

Martín-Hernández, Tomás; Díez Gómez, Juan José; Díaz-Soto, Gonzalo; Torres Cuadro, Alberto; Navarro González, Elena; Oleaga Alday, Amelia; Sambo Salas, Marcel; Reverter Calatayud, Jordi L; Argüelles Jiménez, Iñaki; Mancha Doblas, Isabel; Fernández García, Diego; Galofré, Juan Carlos

2017-03-01

Thyroid nodule detection has increased with widespread use of ultrasound, which is currently the main tool for detection, monitoring, diagnosis and, in some instances, treatment of thyroid nodules. Knowledge of ultrasound and adequate instruction on its use require a position statement by the scientific societies concerned. The working groups on thyroid cancer and ultrasound techniques of the Spanish Society of Endocrinology and Nutrition have promoted this document, based on a thorough analysis of the current literature, the results of multicenter studies and expert consensus, in order to set the requirements for the best use of ultrasound in clinical practice. The objectives include the adequate framework for use of thyroid ultrasound, the technical and legal requirements, the clinical situations in which it is recommended, the levels of knowledge and learning processes, the associated responsibility, and the establishment of a standardized reporting of results and integration into hospital information systems and endocrinology units. Copyright © 2017 SEEN. Publicado por Elsevier España, S.L.U. All rights reserved.

Novel cavitation fluid jet polishing process based on negative pressure effects.

Science.gov (United States)

Chen, Fengjun; Wang, Hui; Tang, Yu; Yin, Shaohui; Huang, Shuai; Zhang, Guanghua

2018-04-01

Traditional abrasive fluid jet polishing (FJP) is limited by its high-pressure equipment, unstable material removal rate, and applicability to ultra-smooth surfaces because of the evident air turbulence, fluid expansion, and a large polishing spot in high-pressure FJP. This paper presents a novel cavitation fluid jet polishing (CFJP) method and process based on FJP technology. It can implement high-efficiency polishing on small-scale surfaces in a low-pressure environment. CFJP uses the purposely designed polishing equipment with a sealed chamber, which can generate a cavitation effect in negative pressure environment. Moreover, the collapse of cavitation bubbles can spray out a high-energy microjet and shock wave to enhance the material removal. Its feasibility is verified through researching the flow behavior and the cavitation results of the negative pressure cavitation machining of pure water in reversing suction flow. The mechanism is analyzed through a computational fluid dynamics simulation. Thus, its cavitation and surface removal mechanisms in the vertical CFJP and inclined CFJP are studied. A series of polishing experiments on different materials and polishing parameters are conducted to validate its polishing performance compared with FJP. The maximum removal depth increases, and surface roughness gradually decreases with increasing negative outlet pressures. The surface becomes smooth with the increase of polishing time. The experimental results confirm that the CFJP process can realize a high material removal rate and smooth surface with low energy consumption in the low-pressure environment, together with compatible surface roughness to FJP. Copyright © 2017 Elsevier B.V. All rights reserved.

Presentation of the verbs in Bulgarian-Polish electronic dictionary

Directory of Open Access Journals (Sweden)

Ludmila Dimitrova

2014-09-01

Full Text Available Presentation of the verbs in Bulgarian-Polish electronic dictionary This paper briefly discusses the presentation of the verbs in the first electronic Bulgarian-Polish dictionary that is currently being developed under a bilateral collaboration between IMI-BAS and ISS-PAS. Special attention is given to the digital entry classifiers that describe Bulgarian and Polish verbs. Problems related to the correspondence between natural language phenomena and their presentations are discussed. Some examples illustrate the different types of dictionary entries for verbs.

"Agricultural budget" and the competitiveness of the Polish agriculture

OpenAIRE

Lenkiewicz, Stanisław; Rokicki, Bartłomiej

2014-01-01

The aim of the publication is to assess the impact of public support on the functioning of the Polish agriculture. In order to achieve this aim the publication includes an analysis of the system of direct payments and rural development policy instruments planned to be implemented in Poland within the CAP 2014-2020. The study also presents an analysis of regional diversity of the Polish agriculture and an assessment of the scale of agricultural investment made in recent years in all the Polish...

Computer-Controlled Cylindrical Polishing Process for Development of Grazing Incidence Optics for Hard X-Ray Region

Science.gov (United States)

Khan, Gufran Sayeed; Gubarev, Mikhail; Speegle, Chet; Ramsey, Brian

2010-01-01

The presentation includes grazing incidence X-ray optics, motivation and challenges, mid spatial frequency generation in cylindrical polishing, design considerations for polishing lap, simulation studies and experimental results, future scope, and summary. Topics include current status of replication optics technology, cylindrical polishing process using large size polishing lap, non-conformance of polishin lap to the optics, development of software and polishing machine, deterministic prediction of polishing, polishing experiment under optimum conditions, and polishing experiment based on known error profile. Future plans include determination of non-uniformity in the polishing lap compliance, development of a polishing sequence based on a known error profile of the specimen, software for generating a mandrel polishing sequence, design an development of a flexible polishing lap, and computer controlled localized polishing process.

Effects of Polishing Bur Application Force and Reuse on Sintered Zirconia Surface Topography.

Science.gov (United States)

Fischer, N G; Tsujimoto, A; Baruth, A G

2018-03-16

Limited information is available on how to polish and finish zirconia surfaces following computer-aided design/computer-aided manufacturing (CAD/CAM), specifically, how differing application forces and reuse of zirconia polishing systems affect zirconia topography. To determine the effect of differing, clinically relevant, polishing application forces and multiple usages of polishing burs on the surface topography of CAD/CAM zirconia. One hundred twenty 220-grit carbide finished zirconia disks were sintered according to manufacturer's directions and divided into two groups for the study of two coarse polishing bur types. Each group was divided into subgroups for polishing (15,000 rpm) at 15 seconds for 1.0 N, 4.5 N, or 11 N of force using a purpose-built fixture. Subgroups were further divided to study the effects of polishing for the first, fifth, 15th, and 30th bur use, simulating clinical procedures. Unpolished surfaces served as a control group. Surfaces were imaged with noncontact optical profilometry (OP) and atomic force microscopy (AFM) to measure average roughness values (Ra). Polishing burs were optically examined for wear. Scanning electron microscopy (SEM) was performed on burs and zirconia surfaces. One-way ANOVA with post hoc Tukey HSD (honest significant difference) tests (α=0.05) were used for statistical analyses. AFM and OP Ra values of all polished surfaces were significantly lower than those of the unpolished control. Different polishing forces and bur reuse showed no significant differences in AFM Ra. However, significant differences in OP Ra were found due to differing application forces and bur reuse between the first and subsequent uses. SEM and optical micrographs revealed notable bur wear, increasing with increasing reuse. SEM and AFM micrographs clearly showed polished, periodic zirconia surfaces. Nanoscale topography, as analyzed with kurtosis and average groove depth, was found dependent on the specific polishing bur type. These in

The Czechoslovak-Polish Club in Brno (1925–1939)

Czech Academy of Sciences Publication Activity Database

Baron, Roman

2011-01-01

Roč. 3, č. 1 (2011), s. 43-64 ISSN 1803-6546 Institutional research plan: CEZ:AV0Z80150510 Keywords : Czechoslovak-Polish solidarity * Czechoslovak-Polish relations * Brno * associations * Interwar Period Subject RIV: AB - History

ASSESSING REFERRALS AND IMPROVING INFORMATION AVAILABILITY FOR CONSULTATIONS IN AN ACADEMIC ENDOCRINOLOGY CLINIC.

Science.gov (United States)

Hendrickson, Chase D; Saini, Saumya; Pothuloori, Avin; Mecchella, John N

2017-02-01

Outpatient specialty consultations rely on the timeliness and completeness of referral information to facilitate a valuable patient-specialist interaction. This project aimed to increase essential diagnostic information availability at the initial consultation for patients referred for common endocrine conditions frequently lacking such data-diabetes mellitus, thyroid nodule, thyrotoxicosis, and hypercalcemia. At an endocrinology clinic at an academic medical center in rural New England, providers see several thousand new patients annually, the majority of whom are referred by providers external to the clinic's healthcare system. Through consensus, endocrinology clinic providers agreed on the two or three data elements essential for a meaningful initial consultation for each. A quality improvement team employed a planned series of interventions based on previously published methods and an innovative approach: dissemination of a referral guideline, an assessment of referral adequacy in the endocrinology clinic workflow, coupled with focused requests for missing items, and a pre-visit lab appointment. Between April 2015 and March 2016, 762 referrals were reviewed. At baseline for the four conditions, referrals contained all essential elements only 27.5% (22 of 80) of the time. Over a 7-month period, the team implemented the interventions, with subsequent referrals containing all essential elements increasing to 75.5% (P<.0001), largely attributable to the pre-visit lab appointment. Incoming referrals that lack essential information are a significant problem in specialty care and may adversely affect patient experience, provider satisfaction, and clinic efficiency. Improvement may require innovative approaches, such as the potentially transferable and generalizable ones employed here. DHMC = Dartmouth-Hitchcock Medical Center EHR = electronic health record PDSA = Plan-Do-Study-Act.

Influence of polishing on surface roughness following toothbrushing wear of composite resins.

Science.gov (United States)

Dalla-Vecchia, Karine Battestin; Taborda, Talita Damas; Stona, Deborah; Pressi, Heloísa; Burnett Júnior, Luiz Henrique; Rodrigues-Junior, Sinval Adalberto

2017-01-01

This study aimed to evaluate the influence of different polishing systems on the surface roughness of composite resins following procedures to simulate the effects of toothbrushing over time. Four currently available commercial composites were used to make 128 cylindrical specimens. The specimens were randomly allocated to polishing with a 1-step polisher or 1 of 3 multistep polishers (n = 8 per group). The baseline surface roughness was measured, and the specimens were submitted to 5000, 10,000, and 20,000 brushing cycles to represent toothbrushing throughout 6, 12, and 24 months, respectively. Results showed that surface roughness was influenced by the type of composite and polishing system and was not influenced by the simulated toothbrushing time. However, the surface roughness, as challenged by toothbrushing wear, was affected by the interaction among the composite, the polisher, and the toothbrushing time. The 1-step polisher produced the highest surface roughness and influenced toothbrushing wear resistance of some composites.

[The and beginnings of Chilean endocrinology in the 1920s].

Science.gov (United States)

Sánchez Delgado, Marcelo

2016-01-01

Rejuvenation was a chapter of critical importance for the worldwide development of endocrinology in the 1920s. This work explores the acceptance of these techniques in Chile. Starting in the late 19th century, the Chilean Medical Journal (Revista Médica de Chile) incorporated references to experiments with endocrine gland preparations that were being conducted in Europe at the time. An appropriation of the experiments by the Austrian Eugen Steinach began in 1920, with prominent figures such as the Italian professor Juan Noe Crevani and the young Chilean student Ottmar Wilhelm. Between 1922 and 1924, Wilhelm developed a series of experiments on dogs, bulls, pigs, rats and Welfare Board patients through the so-called Steinach operation, which consisted of the sectioning of the efferent channel in one of the testicles. Professor Noe's scientific patronage policy and Wilhelm's strategy of succession in the field led the latter to hold a chair in the new School of Medicine of Universidad de Concepci6n at the age of 25. From this position, the. figure of Wilhelm was fundamental for the development of a line of endocrinological research that was able to position Universidad de Concepci6n as a scientific development centre, which was strengthened by the arrival of another disciple of Steinach in Chile, the Latvian professor Alejandro Lipschütz.

Surface analysis of polished fused-silica laser lenses by ion-scattering spectrometry

International Nuclear Information System (INIS)

Orvek, K.; Steward, S.A.

1982-01-01

New advances in high-powered glass lasers, particularly the NOVA system, have resulted in a need for lenses having higher damage threshold values than those now available. It is currently thought that surface contaminants on the lenses are responsible for initiating part of the damage. These contaminants are apparently introduced during the final polishing stages. In this study, we used ion-scattering spectrometry (ISS) to identify contaminants arising through the use of different polishing techniques. Five lenses were studied, each having undergone different polishing procedures. The first lens was not polished after receiving it from the manfacturer (No. 381). Ion microprobe data were available for this lens, and they were compared to ISS results. The second lens had been polished with rouge, a polishing compound no longer in use (No. 796). This sample served as a further check on the ISS results. The third lens was studied as received from the manufacturer - with no handling or cleaning (No. 802). The final two lenses had both been polished using high-purity ceria, cerium oxide (No. 800 and No. 801). The difference between these two was that No. 800 was polished using a nylon lap, and No. 801 was polished using pitch as a lap. The 800-series lenses were all made from the same batch, and constituted the major part of the investigation

1.06 μm 150 psec laser damage study of diamond turned, diamond turned/polished and polished metal mirrors

International Nuclear Information System (INIS)

Saito, T.T.; Milam, D.; Baker, P.; Murphy, G.

1975-01-01

Using a well characterized 1.06 μm 150 ps glass laser pulse the damage characteristics for diamond turned, diamond turned/ polished, and polished copper and silver mirrors less than 5 cm diameter were studied. Although most samples were tested with a normal angle of incidence, some were tested at 45 0 with different linear polarization showing an increase in damage threshold for S polarization. Different damage mechanisms observed will be discussed. Laser damage is related to residual surface influences of the fabrication process. First attempts to polish diamond turned surfaces resulted in a significant decrease in laser damage threshold. The importance of including the heat of fusion in the one dimensional heat analysis of the theoretical damage threshold and how close the samples came to the theoretical damage threshold is discussed. (auth)

Electrolytic polishing system for space age materials

International Nuclear Information System (INIS)

Coons, W.C.; Iosty, L.R.

1976-01-01

A simple electrolytic polishing technique was developed for preparing Cr, Co, Hf, Mo, Ni, Re, Ti, V, Zr, and their alloys for structural analysis on the optical microscope. The base electrolyte contains 5g ZnCl 2 and 15g AlCl 3 . 6H 2 O in 200 ml methyl alcohol, plus an amount of H 2 SO 4 depending on the metal being polished. Five etchants are listed

Effects of different polishing techniques on the surface roughness of dental porcelains

Directory of Open Access Journals (Sweden)

Işil Sarikaya

2010-02-01

Full Text Available OBJECTIVE: The purpose of this study was to evaluate the effects of different polishing techniques on the surface roughness of dental porcelains. MATERIAL AND METHODS: Fifty-five cylindirical specimens (15x2 mm were prepared for each feldspathic (Vita VMK 95, Ceramco III and low-fusing dental porcelain (Matchmaker. Fifty-five specimens of machinable feldspathic porcelain blocks (Vitablocs Mark II, (12x14x18 mm were cut into 2-mm-thick slices (12x14 mm with low speed saw. The prepared specimens were divided into 11 groups (n=5 representing different polishing techniques including control ((C no surface treatment, glaze (G and other 9 groups that were finished and polished with polishing discs (Sof-Lex (Sl, two porcelain polishing kits (NTI (Pk, Dialite II (Di, a diamond polishing paste (Sparkle (Sp, a zirconium silicate based cleaning and polishing prophy paste (Zircate (Zr, an aluminum oxide polishing paste (Prisma Gloss (Pg, and combinations of them. The surface roughness of all groups was measured with a profilometer. The data were analyzed with a 2-way analysis of variance, and the mean values were compared by the Tukey Honestly Significant Difference test (a=0.05. RESULTS: For all porcelain material groups, the lowest Ra values were observed in Group Gl, Group Sl, Group Pk, and Group Di, which were not significantly different from each other (p>0.05.When comparing the 4 different porcelain materials, the machinable feldspathic porcelain block group (Mark II demonstrated statistically significantly less Ra values than the other porcelain materials tested (p<0.05. No significant difference was observed between the VMK 95 and Ceramco III porcelain groups (p=0.919, also these groups demonstrated the highest Ra values. CONCLUSION: Subjected to surface roughness, the surfaces obtained with polishing and/or cleaning-prophy paste materials used alone were rougher compared to the surfaces finished using Sof-lex, Dialite, and NTI polishing kit

Polish Phoneme Statistics Obtained On Large Set Of Written Texts

Directory of Open Access Journals (Sweden)

Bartosz Ziółko

2009-01-01

Full Text Available The phonetical statistics were collected from several Polish corpora. The paper is a summaryof the data which are phoneme n-grams and some phenomena in the statistics. Triphonestatistics apply context-dependent speech units which have an important role in speech recognitionsystems and were never calculated for a large set of Polish written texts. The standardphonetic alphabet for Polish, SAMPA, and methods of providing phonetic transcriptions are described.

Polishing compound for plastic surfaces

Science.gov (United States)

Stowell, M.S.

1991-01-01

This invention is comprised of a polishing compound for plastic materials. The compound includes approximately by approximately by weight 25 to 80 parts at least one petroleum distillate lubricant, 1 to 12 parts mineral spirits, 50 to 155 parts abrasive paste, and 15 to 60 parts water. Preferably, the compound includes approximately 37 to 42 parts at least one petroleum distillate lubricant, up to 8 parts mineral spirits, 95 to 110 parts abrasive paste, and 50 to 55 parts water. The proportions of the ingredients are varied in accordance with the particular application. The compound is used on PLEXIGLAS{trademark}, LEXAN{trademark}, LUCITE{trademark}, polyvinyl chloride (PVC), and similar plastic materials whenever a smooth, clear polished surface is desired.

Systematic reviews of diagnostic tests in endocrinology: an audit of methods, reporting, and performance.

Science.gov (United States)

Spencer-Bonilla, Gabriela; Singh Ospina, Naykky; Rodriguez-Gutierrez, Rene; Brito, Juan P; Iñiguez-Ariza, Nicole; Tamhane, Shrikant; Erwin, Patricia J; Murad, M Hassan; Montori, Victor M

2017-07-01

Systematic reviews provide clinicians and policymakers estimates of diagnostic test accuracy and their usefulness in clinical practice. We identified all available systematic reviews of diagnosis in endocrinology, summarized the diagnostic accuracy of the tests included, and assessed the credibility and clinical usefulness of the methods and reporting. We searched Ovid MEDLINE, EMBASE, and Cochrane CENTRAL from inception to December 2015 for systematic reviews and meta-analyses reporting accuracy measures of diagnostic tests in endocrinology. Experienced reviewers independently screened for eligible studies and collected data. We summarized the results, methods, and reporting of the reviews. We performed subgroup analyses to categorize diagnostic tests as most useful based on their accuracy. We identified 84 systematic reviews; half of the tests included were classified as helpful when positive, one-fourth as helpful when negative. Most authors adequately reported how studies were identified and selected and how their trustworthiness (risk of bias) was judged. Only one in three reviews, however, reported an overall judgment about trustworthiness and one in five reported using adequate meta-analytic methods. One in four reported contacting authors for further information and about half included only patients with diagnostic uncertainty. Up to half of the diagnostic endocrine tests in which the likelihood ratio was calculated or provided are likely to be helpful in practice when positive as are one-quarter when negative. Most diagnostic systematic reviews in endocrine lack methodological rigor, protection against bias, and offer limited credibility. Substantial efforts, therefore, seem necessary to improve the quality of diagnostic systematic reviews in endocrinology.

[Gregorio Marañón, a pioneer of endocrinology, 50 years after his death].

Science.gov (United States)

Zarate, Arturo

2011-01-01

Gregorio Maranon born and dead in Madrid (1887-1960), was a Spanish physician, scientist, historian, philosopher, humanist, and writer, considered one of the most brilliant Spanish intellectuals of the 20th century. He was also a Republican and fought the Primo de Rivera dictatorship, though later expressed his disagreement with communism. Maranon participated closely with the process of exile of Alfonso XIII. From a very early age he learned several foreign languages and was an avid reader, hence he became in contact with the intellectual circles of the time and cultivated a close friendship with Perez Galdos, Menendez-Pelayo, Ortega y Gasset, Pio Baroja, Unamuno, Lerroux among several outstanding and eminent figures of the famous Generation of 14. In Medical School he had great teachers such as Santiago Ramon y Cajal, and later he specialized in endocrinology and became professor of the specialty in the Complutense University in Madrid, moreover he founded the Institute of Medical Pathology and the Department of Experimental Endocrinology, henceforth he contributed to establish the relationship between endocrinology and psychology. At the beginning of the instauration of the Republic, Maranon became a member of the constituent assembly and the parliament, but soon became disillusioned of communism and left Spain before the initiation of the Civil War, remaining in France until 1942 when he returned to Spain to reestablish his private practice, and soon the medical teaching at the hospital which now bears his name. Late work about history, poetry was elaborated at his Toledo Cigarral de Menores.

An Evaluation of Mobile Applications for Reproductive Endocrinology and Infertility Providers.

Science.gov (United States)

Shaia, Kathryn L; Farag, Sara; Chyjek, Kathy; Knopman, Jaime; Chen, Katherine T

2017-03-01

To identify and rate reproductive endocrinology and infertility (REI) mobile applications (apps) targeted toward REI providers. A list of REI apps was found in both the Apple iTunes and Google Play stores using the following seven MeSH terms: reproductive endocrinology, REI, infertility, fertility, In Vitro Fertilization, IVF, and embryology. Patient-centered apps were excluded. The remaining apps were then evaluated for accuracy using reliable references. Mobile technology. None. Accurate apps were evaluated for comprehensiveness (the extent of the ability to aid in clinical decision-making) and rated with objective and subjective components using the APPLICATIONS scoring system. Using the seven REI-related MeSH terms, 985 apps and 1,194 apps were identified in the Apple iTunes and Google Play stores, respectively. Of these unique apps, only 20 remained after excluding patient-centered apps. Upon further review for applicability to REI specifically and content accuracy, only seven apps remained. These seven apps were then rated using the APPLICATIONS scoring system. Only 0.32% of 2,179 apps reviewed for this study were useful to REI providers. There is potential for further mobile resource development in the area of REI, given the limited number and varying comprehensiveness and quality of available apps.

Pseudo-random tool paths for CNC sub-aperture polishing and other applications.

Science.gov (United States)

Dunn, Christina R; Walker, David D

2008-11-10

In this paper we first contrast classical and CNC polishing techniques in regard to the repetitiveness of the machine motions. We then present a pseudo-random tool path for use with CNC sub-aperture polishing techniques and report polishing results from equivalent random and raster tool-paths. The random tool-path used - the unicursal random tool-path - employs a random seed to generate a pattern which never crosses itself. Because of this property, this tool-path is directly compatible with dwell time maps for corrective polishing. The tool-path can be used to polish any continuous area of any boundary shape, including surfaces with interior perforations.

Phonematic translation of Polish texts by the neural network

International Nuclear Information System (INIS)

Bielecki, A.; Podolak, I.T.; Wosiek, J.; Majkut, E.

1996-01-01

Using the back propagation algorithm, we have trained the feed forward neural network to pronounce Polish language, more precisely to translate Polish text into its phonematic counterpart. Depending on the input coding and network architecture, 88%-95% translation efficiency was achieved. (author)

Empirical relations of sediment transport prediction in Polish multibanks shore; Empiryczne zaleznosci prognozujace ruch osadow w warunkach wielorewawego polskiego brzegu morskiego

Energy Technology Data Exchange (ETDEWEB)

Pruszak, Z. [Polska Akademia Nauk, Gdansk (Poland). Inst. Budownictwa Wodnego; Wierzchnicki, R. [Institute of Nuclear Chemistry and Technology, Warsaw (Poland)

1995-12-31

Qualitative and quantitative description of various elements of bottom sediment movement in Polish multibanks coastal region has been down. Empirical relations linking transport velocity, thickness of the drag layer and the transport volume with the generating wave-current background have been presented. Practical engineering advices on performance of various reports concerning coastal engineering or coastal zone ecology. (author).

Animales de laboratorio en la endocrinología: Biomodelos de las enfermedades tiroideas Laboratory animals in endocrinology: Biomodels in thyroid diseases

Directory of Open Access Journals (Sweden)

Beatriz Hugues Hernandorena

2002-12-01

Full Text Available Los modelos animales que se utilizan en las investigaciones sobre el tiroides ayudan al estudio de los mecanismos patogénicos que conducen a la presentación de los desórdenes de esta glándula, dan la oportunidad de explorar nuevos tratamientos y formas de prevención. El objetivo de este trabajo fue brindar una información detallada sobre los biomodelos de enfermedades que afectan el tiroides, a partir de una revisión bibliográfica sobre el tema, que comprenda los que se obtienen de forma espontánea o inducida, exponiendo los factores ambientales que influyen sobre ellos. En conclusión, se expresaron las ventajas que ofrecen estos biomodelos para los investigadores que se dedican a estudiar esta rama de la endocrinología, aunque no constituyan un reflejo exacto de lo que ocurre en el hombre y no necesariamente reúnan todas las características distintivas de la patología tiroidea en cuestión.The animal models used in the investigations on thyroid help to study the pathogenic mechanisms leading to the appearance of disorders of this gland, and give the opportunity to find new treatments and ways of prevention. The objective of this paper was to provide a detailed information on the biomodels of diseases affecting the thyroid, starting from a bibliographic review on this topic, including those obtained in a spontaneous or induced way, and explaining the environmental factors influencing them. To conclude, the advantages of these biomodels for the researchers devoted to study this branch of endocrinology were stressed, although they are not an exact reflex of what happens in man and they do not necessarily have all the distinctive features of thyroid pathology.

Tribological approach to study polishing of road surface under traffic

OpenAIRE

KANE, Malal; DO, Minh Tan

2007-01-01

The polishing phenomenon of road pavements under the vehicle traffic constitutes the main mechanism inherent to the loss of skid resistance over time. A better understanding of this phenomenon would allow an improvement of road safety. This study comprises a review of laboratory test and a model simulating the polishing of road surfaces. The laboratory test uses a polishing machine so called 'Wehner-Schulze' which can reproduce the evolution of the road texture from specimens taken directly f...

Early studies reported extreme findings with large variability: a meta-epidemiologic study in the field of endocrinology.

Science.gov (United States)

Wang, Zhen; Alahdab, Fares; Almasri, Jehad; Haydour, Qusay; Mohammed, Khaled; Abu Dabrh, Abd Moain; Prokop, Larry J; Alfarkh, Wedad; Lakis, Sumaya; Montori, Victor M; Murad, Mohammad Hassan

2016-04-01

To evaluate the presence of extreme findings and fluctuation in effect size in endocrinology. We systematically identified all meta-analyses published in 2014 in the field of endocrinology. Within each meta-analysis, the effect size of the primary binary outcome was compared across studies according to their order of publication. We pooled studies using the DerSimonian and Laird random-effects method. Heterogeneity was evaluated using the I(2) and tau(2). Twelve percent of the included 100 meta-analyses reported the largest effect size in the very first published study. The largest effect size occurred in the first 2 earliest studies in 31% of meta-analyses. When the effect size was the largest in the first published study, it was three times larger than the final pooled effect (ratio of rates, 3.26; 95% confidence interval: 1.80, 5.90). The largest heterogeneity measured by I(2) was observed in 18% of the included meta-analyses when combining the first 2 studies or 17% when combing the first 3 studies. In endocrinology, early studies reported extreme findings with large variability. This behavior of the evidence needs to be taken into account when used to formulate clinical policies. Copyright © 2016 Elsevier Inc. All rights reserved.

The place of polish in the multilingual space of the European Union

Directory of Open Access Journals (Sweden)

T. I. Neprytska

2015-03-01

Full Text Available The article studies the position of the Polish language in the multilingual space of the European Union and determines the key factors which facilitate its gaining popularity and spreading in Europe. A large territory and population determine the significant presence of Polish in the European Union. Intense economic development facilitates popularization of learning and using Polish in the business medium, however, English was and still remains the dominating language of business. Active work of the state on improving the reputation of the country abroad, civilizational (value­based unity with other nations of the EU, favorable geographical position, common Indo­European roots of Germanic, Romanic and Slavonic  languages as well as usage of the Latin type create favorable conditions for the development and popularization of Polish on the territory of the EU. The article also mentions a number of concerns, which are rooted in the historical past of a dependent or semi­dependent existence of the Polish people, namely, the existence of the Polish and culture in the shade of German and Russian culture space, the negative international image of modern Poland, which was formed at the beginning of the 1990­s, the low level of Europeans’ familiarization with the Polish culture, absence of popularity and economic necessity of learning Polish abroad.

Research on high-efficiency polishing technology of photomask substrate

Science.gov (United States)

Zhao, Shijie; Xie, Ruiqing; Zhou, Lian; Liao, Defeng; Chen, Xianhua; Wang, Jian

2018-03-01

A method of photomask substrate fabrication is demonstrated ,that the surface figure and roughness of fused silica will converge to target precision rapidly with the full aperture polishing. Surface figure of optical flats in full aperture polishing processes is primarily dependent on the surface profile of polishing pad, therefor, a improved function of polishing mechanism was put forward based on two axis lapping machine and technology experience, and the pad testing based on displacement sensor and the active conditioning method of the pad is applied in this research. Moreover , the clamping deformation of the thin glass is solved by the new pitch dispensing method. The experimental results show that the surface figure of the 152mm×152mm×6.35mm optical glass is 0.25λ(λ=633nm) and the roughness is 0.32nm ,which has meet the requirements of mask substrate for 90 45nm nodes.

Forming a health culture of future teachers in Polish educational establishments

Directory of Open Access Journals (Sweden)

T.S. IERMAKOVA

2014-10-01

Full Text Available Aim: to study the experience of the structure and system of training of future teachers in Polish schools. Material: content analysis of domestic and foreign authors. Used data from the survey of students of Polish universities. Also were used survey results through polish service ANKIETKA. For comparison, a questionnaire survey 35 students of the Faculty of Physical Education (future teachers of physical training and 30 students - the future teachers of elementary school of Ukrainian university. Results: the study of Polish teachers consider health culture of a person as the ability to assess individual and community health needs using in everyday life hygiene and health regulations. There have been some differences among Ukrainian and Polish students in their health and health culture. Among the respondents, Polish students - the future teachers of physical culture, is dominated motives such as the improvement of the physical condition, strengthen self-esteem, as well as improved health. Polish students from other disciplines believe that the most important motive for the adoption of physical activity is a concern for the physical well-being and mental health. The majority of Ukrainian students (future teachers of physical culture believe an important part of building health culture of their direct participation in various sports clubs, as well as the ability to organize physical culture, sports and educational work with students outside the classroom. Ukrainian students (other specialty noted the need to improve health, enhance knowledge in specific subjects humanities and promoting healthy lifestyles. Conclusions: It is recommended to use the experience of preparing students of Polish schools in modern Ukrainian higher education.

Confocal Raman spectrocopy for the analysis of nail polish evidence.

Science.gov (United States)

López-López, Maria; Vaz, Joana; García-Ruiz, Carmen

2015-06-01

Nail polishes are cosmetic paints that may be susceptible of forensic analysis offering useful information to assist in a crime reconstruction. Although the nail polish appearance could allow a quick visual identification of the sample, this analysis is subjected to the perception and subjective interpretation of the forensic examiner. The chemical analysis of the nail polishes offers great deal of information not subjected to analyst interpretation. Confocal Raman spectroscopy is a well-suited technique for the analysis of paints due to its non-invasive and non-destructive nature and its ability to supply information about the organic and inorganic components of the sample. In this work, 77 regular and gel nail polishes were analyzed with confocal Raman spectroscopy using two laser wavelengths (532 and 780 nm). The sample behavior under the two laser wavelengths and the differences in the spectra taken at different points of the sample were studied for each nail polish. Additionally, the spectra obtained for all the nail polishes were visually compared. The results concluded that the longer laser wavelength prevents sample burning and fluorescence effects; the similarity among the spectra collected within the sample is not directly related with the presence of glitter particles; and 64% of the samples analyzed showed a characteristic spectrum. Additionally, the use of confocal Raman spectroscopy for the forensic analysis of nail polishes evidence in the form of flakes or smudges on different surfaces were studied. The results showed that both types of evidence can be analyzed by the technique. Also, two non-invasive sampling methods for the collection of the evidence from the nails of the suspect or the victim were proposed: (i) to use acetone-soaked cotton swabs to remove the nail varnishes and (ii) to scrape the nail polish from the nail with a blade. Both approaches, each exhibiting advantages and drawbacks in terms of transport and handling were appropriate

Novel ceria-polymer microcomposites for chemical mechanical polishing

International Nuclear Information System (INIS)

Coutinho, Cecil A.; Mudhivarthi, Subrahmanya R.; Kumar, Ashok; Gupta, Vinay K.

2008-01-01

Abrasive particles are key components in slurries for chemical mechanical polishing (CMP). Since the particle characteristics determine surface quality of wafers during polishing, in this research, novel abrasive composite particles have been developed. These composite particles contain nanoparticles of ceria dispersed within cross-linked, polymeric microspheres such that the average mass fraction of ceria is approximately 50% in the particles. The microspheres are formed by co-polymerization of N-isopropylacrylamide (NIPAM) with 3-(trimethoxysilyl)propyl methacrylate (MPS) and contain interpenetrating (IP) chains of poly(acrylic acid) (PAAc). Infrared spectroscopy, dynamic light scattering, and transmission electron microscopy are employed to characterize the composite particles. Planarization of silicon dioxide wafers is studied on a bench-top CMP tester and the polished surfaces are characterized by ellipsometry, atomic force and optical microscopy. Slurries formed from the composite ceria-polymer particles lead to lower topographical variations and surface roughness than slurries of only ceria nanoparticles even though both slurries achieve similar removal rates of ∼100 nm/min for similar ceria content. Polishing with the novel composite particles gives surfaces devoid of scratches and particle deposition, which makes these particles suitable for the next generation slurries in CMP

Novel ceria-polymer microcomposites for chemical mechanical polishing

Energy Technology Data Exchange (ETDEWEB)

Coutinho, Cecil A. [Department of Chemical and Biomedical Engineering, University of South Florida (United States); Mudhivarthi, Subrahmanya R.; Kumar, Ashok [Nanomaterials and Nanomanufacturing Research Center, University of South Florida (United States); Department of Mechanical Engineering, University of South Florida (United States); Gupta, Vinay K. [Department of Chemical and Biomedical Engineering, University of South Florida (United States)], E-mail: vkgupta@eng.usf.edu

2008-12-30

Abrasive particles are key components in slurries for chemical mechanical polishing (CMP). Since the particle characteristics determine surface quality of wafers during polishing, in this research, novel abrasive composite particles have been developed. These composite particles contain nanoparticles of ceria dispersed within cross-linked, polymeric microspheres such that the average mass fraction of ceria is approximately 50% in the particles. The microspheres are formed by co-polymerization of N-isopropylacrylamide (NIPAM) with 3-(trimethoxysilyl)propyl methacrylate (MPS) and contain interpenetrating (IP) chains of poly(acrylic acid) (PAAc). Infrared spectroscopy, dynamic light scattering, and transmission electron microscopy are employed to characterize the composite particles. Planarization of silicon dioxide wafers is studied on a bench-top CMP tester and the polished surfaces are characterized by ellipsometry, atomic force and optical microscopy. Slurries formed from the composite ceria-polymer particles lead to lower topographical variations and surface roughness than slurries of only ceria nanoparticles even though both slurries achieve similar removal rates of {approx}100 nm/min for similar ceria content. Polishing with the novel composite particles gives surfaces devoid of scratches and particle deposition, which makes these particles suitable for the next generation slurries in CMP.

Jewish problem in the Polish Communist Party

Directory of Open Access Journals (Sweden)

Cimek Henryk

2016-12-01

Full Text Available Jews accounted for approx. 8-10% of the population of the Second Republic and in the communist movement (Polish Communist Party and Polish Communist Youth Union the rate was approx, 30%, while in subsequent years it much fluctuated. The percentage of Jews was the highest in the authorities of the party and in the KZMP. This had a negative impact on the position of the KPP on many issues, especially in its relation to the Second Republic.

Management of prediabetes: a comparison of the treatment approaches utilized by a family practice clinic and an internal medicine/endocrinology practice.

Science.gov (United States)

Anderson, Zachary L; Scopelliti, Emily M; Trompeter, Jessica M; Havrda, Dawn E

2015-02-01

To compare the management of prediabetes between a family practice clinic and internal medicine/endocrinology practice. A randomized, retrospective evaluation of the medical history in 168 eligible patients with a diagnosis of prediabetes or abnormal blood glucose (BG) at a family practice clinic (n = 78) and an internal medicine/endocrinology practice (n = 90). The internal medicine/endocrinology practice provided more counseling regarding lifestyle modifications (91.1% vs 76.9%, P = .039), specific physical activity recommendations (26.7% vs 7.7%, P = .003), and recommended more patients receive 150 minutes/week of moderate exercise (8.9% vs 1.3%, P = .038). The family practice clinic provided more written dietary information (16.9% vs 13.3%, P = .044) and specific weight loss goals (20.5% vs 6.7%, P = .015). The internal medicine/endocrinology practice initiated pharmacological therapy in more patients (51.1% vs 3.8%, P< .001) and had a significant decrease in fasting BG from baseline compared to the family practice clinic (-9.0 vs -5.6 mg/dL, P< .001). Providers are likely to initiate nonpharmacological therapy but may not provide specific education recommended by the American Diabetes Association. The integration of a multidisciplinary team to provide guideline-based nonpharmacologic counseling may be beneficial in improving outcomes in the management of prediabetes. © The Author(s) 2013.

Borel hierarchies in infinite products of Polish spaces

Indian Academy of Sciences (India)

with two product topologies: (i) the product of copies of the Polish topology on X, so that H is again a Polish space and (ii) the product of copies of the discrete topology on X. Define now the Borel hierarchy in the larger topology on H. To do so, we need some notation. An element of H will be denoted by h = (x1,x2,...,xn,.

Influence of ovarian manipulation on reproductive endocrinology in polycystic ovarian syndrome and regularly cycling women

NARCIS (Netherlands)

Hendriks, M.L.; König, T.E.; Soleman, R.S.; Korsen, T.; Schats, R.; Hompes, P.G.A.; Homburg, R.R.; Lambalk, C.B.

2013-01-01

Objective: Little is known about the function of the ovarian neuronal network in humans. In many species, copulation influences endocrinology through this network. As a first step, the possible influence of ovarian mechanical manipulation on pituitary and ovarian hormones was evaluated in polycystic

Polishing Sapphire Substrates by 355 nm Ultraviolet Laser

Directory of Open Access Journals (Sweden)

X. Wei

2012-01-01

Full Text Available This paper tries to investigate a novel polishing technology with high efficiency and nice surface quality for sapphire crystal that has high hardness, wear resistance, and chemical stability. A Q-switched 355 nm ultraviolet laser with nanosecond pulses was set up and used to polish sapphire substrate in different conditions in this paper. Surface roughness Ra of polished sapphire was measured with surface profiler, and the surface topography was observed with scanning electronic microscope. The effects of processing parameters as laser energy, pulse repetition rate, scanning speed, incident angle, scanning patterns, and initial surface conditions on surface roughness were analyzed.

Effect of One-Step and Multi-Steps Polishing System on Enamel Roughness

Directory of Open Access Journals (Sweden)

Cynthia Sumali

2013-07-01

Full Text Available Normal 0 false false false MicrosoftInternetExplorer4 The final procedures of orthodontic treatment are bracket debonding and cleaning the remaining adhesive. Multi-step polishing system is the most common method used. The disadvantage of that system is long working time, because of the stages that should be done. Therefore, dental material manufacturer make an improvement to the system, to reduce several stages into one stage only. This new system is known as one-step polishing system. Objective: To compare the effect of one-step and multi-step polishing system on enamel roughness after orthodontic bracket debonding. Methods: Randomized control trial was conducted included twenty-eight maxillary premolar randomized into two polishing system; one-step OptraPol (Ivoclar, Vivadent and multi-step AstroPol (Ivoclar, Vivadent. After bracket debonding, the remaining adhesive on each group was cleaned by subjective polishing system for ninety seconds using low speed handpiece. The enamel roughness was subjected to profilometer, registering two roughness parameters (Ra, Rz. Independent t-test was used to analyze the mean score of enamel roughness in each group. Results: There was no significant difference of enamel roughness between one-step and multi-step polishing system (p>0.005. Conclusion: One-step polishing system can produce a similar enamel roughness to multi-step polishing system after bracket debonding and adhesive cleaning.DOI: 10.14693/jdi.v19i3.136

Evaluation and Referral of Diabetic Eye Disease in the Endocrinology and Primary Care Office Settings.

Science.gov (United States)

Silva, Fabiana Q; Adhi, Mehreen; Wai, Karen M; Olansky, Leann; Lansang, M Cecilia; Singh, Rishi P

2016-10-01

The purpose of this study was to identify whether endocrinologists and primary care physicians (PCP) adequately screen for ophthalmic symptoms/signs within office visits and provide timely ophthalmology referrals in patients with diabetes. Patients between the ages of 18 years and 80 years with diabetes who underwent an office visit with an endocrinologist or a PCP between January 1, 2014, and December 31, 2014, were identified. Demographics, ophthalmic assessments, and referral information were collected. A total of 1,250 patient records were reviewed. Providers asked about ophthalmic symptoms/signs in 95.5% and 71% of endocrinology and primary care office encounters, respectively (P endocrinology and PCP visits, respectively (P < .0001). Ophthalmic complications from diabetes are not adequately screened, especially within the primary care setting, and further quality improvement measures may improve adherence to recommended screening protocols. [Ophthalmic Surg Lasers Imaging Retina. 2016;47:930-934.]. Copyright 2016, SLACK Incorporated.

The View of Lithuanian Statehood Held by the Polish Underground during 1939-1944

OpenAIRE

Bubnys, Arūnas

2006-01-01

The article investigates the attitudes of Polish underground actors towards the statehood of Lithuania, its territorial integrity, and Lithuanian-Polish relations during the World War II. The author draws the conclusion that Polish underground political structures expressed a hostile and prejudiced attitude towards Lithuania. All the blame and responsibility for bad mutual relations is put on Lithuania and Lithuanians. Polish underground actors living in Vilnija were extremely hostile towards...

Experimental Study on Layered Ice Bonded Abrasive Polishing of Glass-ceramics

Directory of Open Access Journals (Sweden)

Yuli SUN

2014-12-01

Full Text Available Layered ice bonded abrasive tools (LIBAT is a new kind of one which not only has the ability of lapping and polishing but also has the effect of self-dressing. In this paper, two kinds of layered ice bonded abrasive tools were designed and manufactured. Experimental studies on layered ice bonded abrasive (LIBA polishing of glass-ceramics were conducted. The results show that the surface topography of glass-ceramics polished by micro α-Al2O3-nano α-Al2O3 LIBAT is better than that of polished by micro α-Al2O3-nano SiO2 LIBAT. The surface roughness Sa of glass-ceramics polished by the two kinds of LIBAT is at the nanometer scale. The reasons of this phenomenon were analyzed. The experimental results illustrate that the LIBAT shows good effect and can be used in production practice. DOI: http://dx.doi.org/10.5755/j01.ms.20.4.6149

Energy savings in Polish buildings

Energy Technology Data Exchange (ETDEWEB)

Markel, L.C.; Gula, A.; Reeves, G.

1995-12-31

A demonstration of low-cost insulation and weatherization techniques was a part of phase 1 of the Krakow Clean Fossil Fuels and Energy Efficient Project. The objectives were to identify a cost-effective set of measures to reduce energy used for space heating, determine how much energy could be saved, and foster widespread implementation of those measures. The demonstration project focused on 4 11-story buildings in a Krakow housing cooperative. Energy savings of over 20% were obtained. Most important, the procedures and materials implemented in the demonstration project have been adapted to Polish conditions and applied to other housing cooperatives, schools, and hospitals. Additional projects are being planned, in Krakow and other cities, under the direction of FEWE-Krakow, the Polish Energie Cities Network, and Biuro Rozwoju Krakowa.

Nd:YOV4 laser polishing on WC-Co HVOF coating

Science.gov (United States)

Giorleo, L.; Ceretti, E.; Montesano, L.; La Vecchia, G. M.

2017-10-01

WC/Co coatings are widely applied to different types of components due to their extraordinary performance properties including high hardness and wear properties. In industrial applications High Velocity Oxy-Fuel (HVOF) technique is extensively used to deposit hard metal coatings. The main advantage of HVOF compared to other thermal spray techniques is the ability to accelerate the melted powder particles of the feedstock material at a relatively high velocity, leading to obtain good adhesion and low porosity level. However, despite the mentioned benefits, the surface finish quality of WC-Co HVOF coatings results to be poor (Ra higher than 5 µm) thus a mechanical polishing process is often needed. The main problem is that the high hardness of coating leads the polishing process expensive in terms of time and tool wear; moreover polishing becomes difficult and not always possible in case of limited accessibility of a part, micro dimensions or undercuts. Nowadays a different technique available to improve surface roughness is the laser polishing process. The polishing principle is based on focused radiation of a laser beam that melts a microscopic layer of surface material. Compared to conventional polishing process (as grinding) it ensures the possibility of avoiding tool wear, less pollution (no abrasive or liquids), no debris, less machining time and coupled with a galvo system it results to be more suitable in case of 3D complex workpieces. In this paper laser polishing process executed with a Nd:YOV4 Laser was investigated: the effect of different process parameters as initial coating morphology, laser scan speed and loop cycles were tested. Results were compared by a statistical approach in terms of average roughness along with a morphological analysis carried out by Scanning Electron Microscope (SEM) investigation coupled with EDS spectra.

Experimental Study on Abrasive Waterjet Polishing of Hydraulic Turbine Blades

International Nuclear Information System (INIS)

Khakpour, H; Birglenl, L; Tahan, A; Paquet, F

2014-01-01

In this paper, an experimental investigation is implemented on the abrasive waterjet polishing technique to evaluate its capability in polishing of surfaces and edges of hydraulic turbine blades. For this, the properties of this method are studied and the main parameters affecting its performance are determined. Then, an experimental test-rig is designed, manufactured and tested to be used in this study. This test-rig can be used to polish linear and planar areas on the surface of the desired workpieces. Considering the number of parameters and their levels, the Taguchi method is used to design the preliminary experiments. All experiments are then implemented according to the Taguchi L 18 orthogonal array. The signal-to-noise ratios obtained from the results of these experiments are used to determine the importance of the controlled polishing parameters on the final quality of the polished surface. The evaluations on these ratios reveal that the nozzle angle and the nozzle diameter have the most important impact on the results. The outcomes of these experiments can be used as a basis to design a more precise set of experiments in which the optimal values of each parameter can be estimated

Calculation and simulation on mid-spatial frequency error in continuous polishing

International Nuclear Information System (INIS)

Xie Lei; Zhang Yunfan; You Yunfeng; Ma Ping; Liu Yibin; Yan Dingyao

2013-01-01

Based on theoretical model of continuous polishing, the influence of processing parameters on the polishing result was discussed. Possible causes of mid-spatial frequency error in the process were analyzed. The simulation results demonstrated that the low spatial frequency error was mainly caused by large rotating ratio. The mid-spatial frequency error would decrease as the low spatial frequency error became lower. The regular groove shape was the primary reason of the mid-spatial frequency error. When irregular and fitful grooves were adopted, the mid-spatial frequency error could be lessened. Moreover, the workpiece swing could make the polishing process more uniform and reduce the mid-spatial frequency error caused by the fix-eccentric plane polishing. (authors)

Surface morphology changes of acrylic resins during finishing and polishing phases

Directory of Open Access Journals (Sweden)

Glaucio Serra

2013-12-01

Full Text Available INTRODUCTION: The finishing and polishing phases are essential to improve smoothness and shining on the surface of acrylic resins used to make removable orthodontic appliances. A good surface finishing reduces roughness, which facilitates hygiene, prevents staining and provides greater comfort to the patients. OBJECTIVE: The aim of this paper was to analyze the changes on surface morphology of acrylic resins during finishing and polishing phases. METHODS: Thirty discs (10 mm in diameter and 5 mm in length were made with acrylic resin and randomly divided into ten groups. The control group did not receive any treatment while the other groups received gradual finishing and polishing. The last group received the entire finishing and polishing procedures. Surface morphology was qualitatively analyzed through scanning electron microscopy and quantitatively analyzed through a laser profilometer test. RESULTS: The acrylic resin surfaces without treatment showed bubbles which were not observed in the subsequent phases. Wearing out with multilaminated burs, finishing with wood sandpaper and finishing with water sandpaper resulted in surfaces with decreasing irregularities. The surfaces that were polished with pumice and with low abrasive liquids showed high superficial smoothness. CONCLUSION: Highly smooth acrylic resin surfaces can be obtained after mechanical finishing and polishing performed with multilaminated burs, wood sandpaper, water sandpaper, pumice and low abrasive liquids.

[Assessment of a residency training program in endocrinology and nutrition by physicians: results of a survey].

Science.gov (United States)

Moreno-Fernández, Jesús; Gutiérrez-Alcántara, Carmen; Palomares-Ortega, Rafael; García-Manzanares, Alvaro; Benito-López, Pedro

2011-12-01

The current training program for resident physicians in endocrinology and nutrition (EN) organizes their medical learning. Program evaluation by physicians was assessed using a survey. The survey asked about demographic variables, EN training methods, working time and center, and opinion on training program contents. Fifty-one members of Sociedad Castellano-Manchega de Endocrinología, Nutrición y Diabetes, and Sociedad Andaluza de Endocrinología y Nutrición completed the survey. Forty-percent of them disagreed with the compulsory nature of internal medicine, cardiology, nephrology and, especially, neurology rotations (60%); a majority (>50%) were against several recommended rotations included in the program. The fourth year of residence was considered by 37.8% of respondents as the optimum time for outpatient and inpatient control and monitoring without direct supervision. The recommended monthly number of on-call duties was 3.8±1.2. We detected a positive opinion about extension of residence duration to 4.4±0.5 years. Doctoral thesis development during the residence period was not considered convenient by 66.7% of physicians. Finally, 97.8% of resident physicians would recommend residency in EN to other colleagues. Endocrinologists surveyed disagreed with different training program aspects such as the rotation system, skill acquisition timing, and on-call duties. Therefore, an adaptation of the current training program in EN would be required. Copyright © 2011 SEEN. Published by Elsevier Espana. All rights reserved.

Implementation of the Bulgarian-Polish online dictionary

Directory of Open Access Journals (Sweden)

Ludmila Dimitrova

2015-11-01

Full Text Available Implementation of the Bulgarian-Polish online dictionary The paper describes the implementation of an online Bulgarian-Polish dictionary as a technological tool for applications in digital humanities. This bilingual digital dictionary is developed in the frame of the joint research project “Semantics and Contrastive Linguistics with a focus on a bilingual electronic dictionary” between IMI-BAS and ISS-PAS, supervised by L. Dimitrova (IMI-BAS and V. Koseska-Toszewa (ISS-PAS. In addition, the main software tools for web-presentation of the dictionary are described briefly.

Lay beliefs on Polish oncology in the evaluation of healthy individuals.

Science.gov (United States)

Synowiec-Piłat, Małgorzata

2017-12-23

Poland is among the countries which reported the highest rates of mortality from cancer. The health behaviours of people are influenced, among other things, by their beliefs about cancer, but their evaluation of oncological institutions and specialists seems also to be of great importance. Objectives. 1. How the respondents evaluate Polish oncology: a) the conditions of treatment in oncology hospitals, b) access to oncological medical services, c) the competence of oncologists. 2. What are the socio-cultural factors of the assessment of Polish oncology? 3. What is the influence of the grade level of the assessment of Polish oncology on the degree of fear and the knowledge about cancer? The study was carried out with a sample of 910 adult residents of Wroclaw in south-west Poland. Quota sampling was used. An interview questionnaire was used as the method. Analysis of the data showed a negative image of Polish oncology, according to the study participants: dissatisfaction with both treatment conditions and with access to medical services. Assessment of Polish oncology depends primarily on education, age and economic situation, as well as 'family history of cancer', and attitude towards doctors. The lower the rating of Polish oncology, the lower the medical knowledge, and the higher the level of fear of cancer. Negative assessment of Polish oncology perpetuates the fear of cancer in society. There is a need for constant improvement of the quality of medical oncology services, for building public trust in physicians, to fight inequalities in health, and to take into account the lay perspectives in developing strategies to combat cancer.

The Profile of a Polish Mutual Fund Manager

Directory of Open Access Journals (Sweden)

Dariusz Filip

2018-05-01

Full Text Available Aim/purpose - The purpose of this paper is to identify the characteristics that are typical of mutual fund managers. Design/methodology/approach - The study concentrates on a set of socio-demographic data, such as: age, gender, education, experience, and professional qualifications of 336 portfolio managers. The applied research strategy relies on an analysis concerning a set of statistical metrics describing the population under examination. Findings - The average Polish fund manager is a 37-year-old man, a holder of a stock-broker or investment adviser license. He obtained the authorization from the Polish Financial Supervision Authority (KNF a few years after graduating from the Warsaw School of Economics (SGH. He has 11 years' experience in financial markets and 7 years' experience in the mutual fund industry. Research implications/limitations - The identification of managerial characteristics for the purpose of creating a profile of a Polish mutual fund manager will provide an important basis for further surveys and analyses aimed to evaluate the effectiveness of mutual funds. Originality/value/contribution - There are no investigations within the discussed area in Polish studies. Therefore, the identification of the characteristics that are typical of mutual fund managers will make a contribution to the finance literature.(original abstract

Comparative endocrinology in the 21st century

Science.gov (United States)

Denver, R.J.; Hopkins, P.M.; McCormick, S.D.; Propper, C.R.; Riddiford, L.; Sower, S.A.; Wingfield, J.C.

2009-01-01

Hormones coordinate developmental, physiological, and behavioral processes within and between all living organisms. They orchestrate and shape organogenesis from early in development, regulate the acquisition, assimilation, and utilization of nutrients to support growth and metabolism, control gamete production and sexual behavior, mediate organismal responses to environmental change, and allow for communication of information between organisms. Genes that code for hormones; the enzymes that synthesize, metabolize, and transport hormones; and hormone receptors are important targets for natural selection, and variation in their expression and function is a major driving force for the evolution of morphology and life history. Hormones coordinate physiology and behavior of populations of organisms, and thus play key roles in determining the structure of populations, communities, and ecosystems. The field of endocrinology is concerned with the study of hormones and their actions. This field is rooted in the comparative study of hormones in diverse species, which has provided the foundation for the modern fields of evolutionary, environmental, and biomedical endocrinology. Comparative endocrinologists work at the cutting edge of the life sciences. They identify new hormones, hormone receptors and mechanisms of hormone action applicable to diverse species, including humans; study the impact of habitat destruction, pollution, and climatic change on populations of organisms; establish novel model systems for studying hormones and their functions; and develop new genetic strains and husbandry practices for efficient production of animal protein. While the model system approach has dominated biomedical research in recent years, and has provided extraordinary insight into many basic cellular and molecular processes, this approach is limited to investigating a small minority of organisms. Animals exhibit tremendous diversity in form and function, life-history strategies, and

[Lysenkoism in Polish botany].

Science.gov (United States)

Köhler, Piotr

2008-01-01

Lysenkoism in Poland was never an autonomous phenomenon. The whole array of reasons for which it appeared in Polish science would require a separate study--here it only needs to be pointed out that the major reasons included terror on the part of the security service, lawlessness, the ubiquitous atmosphere of intimidation and terror, censorship, the diminishing sphere of civil liberties, political show trials, propaganda and denunciations. An important role in facilitating the introduction of Lysenkoism was played also by the reorganization of science after World War Two, the isolation of Polish science from science in the West, as well as the damage it had suffered during the war. At first, Lysenkoism was promoted in Poland by a small group of enthusiastic and uncritical proponents. A overview of the events connected with the ten years of Lysenkoism in Poland (end of 1948--beginning of 1958) shows a two-tier picture of how the 'idea' was propagated. The first tier consisted in the activities of the Association of Marxist Naturalists [Koło Przyrodników-Marksistów], which it engaged in since the end of 1948. The Association was later transformed into a Union of Marxist Naturalists, and this in turn merged, in 1952, with the Copernican Society of Polish Naturalists [Polskie Towarzystwo Przyrodników im. Kopernika]. It was that society which promoted Lysenkoism longest, until the end of 1956. The propaganda and training activities of the circle and the society prepared ground for analogous activities of the newly formed Polish Academy of Science (PAN), which--since its very establishment in 1952--engaged in promoting Lysenkoism through its Second Division. These activities were aimed at naturalists, initially at those who were prominent scientists (eg. the conference at Kuźnice, 1950/1951), and then at those who were only starting their academic career (including national courses in new biology at Dziwnów, 1952, or Kortowo, 1953 and 1955). The end to promoting

Condensate polishing guidelines for PWR and BWR plants

International Nuclear Information System (INIS)

Robbins, P.; Crinigan, P.; Graham, B.; Kohlmann, R.; Crosby, C.; Seager, J.; Bosold, R.; Gillen, J.; Kristensen, J.; McKeen, A.; Jones, V.; Sawochka, S.; Siegwarth, D.; Keeling, D.; Polidoroff, T.; Morgan, D.; Rickertsen, D.; Dyson, A.; Mills, W.; Coleman, L.

1993-03-01

Under EPRI sponsorship, an industry committee, similar in form and operation to other guideline committees, was created to develop Condensate Polishing Guidelines for both PWR and BWR systems. The committee reviewed the available utility and water treatment industry experience on system design and performance and incorporated operational and state-of-the-art information into document. These guidelines help utilities to optimize present condensate polisher designs as well as be a resource for retrofits or new construction. These guidelines present information that has not previously been presented in any consensus industry document. The committee generated guidelines that cover both deep bed and powdered resin systems as an integral part of the chemistry of PWR and BWR plants. The guidelines are separated into sections that deal with the basis for condensate polishing, system design, resin design and application, data management and performance and management responsibilities

Mechanistic, kinetic, and processing aspects of tungsten chemical mechanical polishing

Science.gov (United States)

Stein, David

This dissertation presents an investigation into tungsten chemical mechanical polishing (CMP). CMP is the industrially predominant unit operation that removes excess tungsten after non-selective chemical vapor deposition (CVD) during sub-micron integrated circuit (IC) manufacture. This work explores the CMP process from process engineering and fundamental mechanistic perspectives. The process engineering study optimized an existing CMP process to address issues of polish pad and wafer carrier life. Polish rates, post-CMP metrology of patterned wafers, electrical test data, and synergy with a thermal endpoint technique were used to determine the optimal process. The oxidation rate of tungsten during CMP is significantly lower than the removal rate under identical conditions. Tungsten polished without inhibition during cathodic potentiostatic control. Hertzian indenter model calculations preclude colloids of the size used in tungsten CMP slurries from indenting the tungsten surface. AFM surface topography maps and TEM images of post-CMP tungsten do not show evidence of plow marks or intergranular fracture. Polish rate is dependent on potassium iodate concentration; process temperature is not. The colloid species significantly affects the polish rate and process temperature. Process temperature is not a predictor of polish rate. A process energy balance indicates that the process temperature is predominantly due to shaft work, and that any heat of reaction evolved during the CMP process is negligible. Friction and adhesion between alumina and tungsten were studied using modified AFM techniques. Friction was constant with potassium iodate concentration, but varied with applied pressure. This corroborates the results from the energy balance. Adhesion between the alumina and the tungsten was proportional to the potassium iodate concentration. A heuristic mechanism, which captures the relationship between polish rate, pressure, velocity, and slurry chemistry, is presented

[Cardiovascular risk factor control in a population with longstanding diabetes attending endocrinology departments].

Science.gov (United States)

Comi-Diaz, Cristina; Miralles-García, José M; Cabrerizo, Lucio; Pérez, María; Masramon, Xavier; De Pablos-Velasco, Pedro

2010-12-01

To determine the degree of control of cardiovascular risk factors (CVRF) in a sample of patients with diabetes mellitus (DM) attending Endocrinology and Nutrition Departments in Spain. An epidemiological, cross-sectional, multicenter and observational study involving 41 Departments of Endocrinology and Nutrition in Spain. Each department selected patients with DM with over 10 years of evolution, which were treated in outpatient settings. Demographic, anthropometric, clinical and biochemical data, including medication, were collected for each participant. 1159 patients who met the inclusion criteria were recruited. 52% of the participants were patients with type 2 DM. The mean duration of DM was 19.6 years. A proportion of 37%, 44%, 27.6% and 25.5% had good control of their blood pressure (BP), low density cholesterol (LDLc), lipids and glucose, respectively, and only 4.3% did well in all factors evaluated. The percentage of poorly controlled BP was four times higher in type 2 than in type 1 DM. Obesity, low cultural level and aggregation of cardiovascular risk factors were associated with poorer control. The degree of control of CVRF in diabetic patients with long disease duration is insufficient. Copyright © 2010 SEEN. Published by Elsevier Espana. All rights reserved.

Chemical Mechanical Polishing of Ruthenium, Cobalt, and Black Diamond Films

Science.gov (United States)

Peethala, Brown Cornelius

Ta/TaN bilayer serves as the diffusion barrier as well as the adhesion promoter between Cu and the dielectric in 32 nm technology devices. A key concern of future technology devices (layer (vs. a bilayer of Ta/TaN) to act as a barrier. During patterning, they need to be planarized using conventional chemical mechanical polishing (CMP) to achieve a planar surface. However, CMP of these new barrier materials requires novel slurry compositions that provide adequate selectivity towards Cu and dielectric films, and minimize galvanic corrosion. Apart from the application as a barrier, Ru also has been proposed as a lower electrode material in metal-insulator-metal capacitors where high (> 50 nm/min) Ru removal rates (RRs) are required and as a stop layer in magnetic recording head fabrication where low (hydroxide (KOH). It was also determined that increased the ionic strength is not responsible for the observed increase in Ru removal rate. Benzotirazole (BTA) and ascorbic acid were added to the slurry to reduce the open circuit potential (Eoc) difference between Cu and Ru to ˜20 mV from about 550 mV in the absence of additives. A removal mechanism with KIO4 as the oxidizing agent is proposed based on the formation of several ruthenium oxides, some of which formed residues on the polishing pad below a pH of ˜7. Next, a colloidal silica-based slurry with hydrogen peroxide (H 2O2) as the oxidizer (1 wt%), and arginine (0.5 wt%) as the complexing agent was developed to polish Co at pH 10. The Eoc between Cu and Co at the above conditions was reduced to ˜20 mV compared to ˜250 mV in the absence of additives, suggestive of reduced galvanic corrosion during the Co polishing. The slurry also has the advantages of good post-polish surface quality at pH 10, and no dissolution rate. BTA at a concentration of 5mM in this slurry inhibited Cu dissolution rates and yielded a Cu/Co RR ratio of ˜0.8:1 while the open potential difference between Cu and Co was further reduced to ˜10

Wear characteristics of polished and glazed lithium disilicate ceramics opposed to three ceramic materials.

Science.gov (United States)

Saiki, Osamu; Koizumi, Hiroyasu; Akazawa, Nobutaka; Kodaira, Akihisa; Okamura, Kentaro; Matsumura, Hideo

2016-01-01

This study compared the wear characteristics of a heat-pressed lithium disilicate ceramic material opposed to feldspathic porcelain, a lithium disilicate glass ceramic, and zirconia materials. Ceramic plate specimens were prepared from feldspathic porcelain (EX-3 nA1B), lithium disilicate glass ceramics (e.max CAD MO1/C14), and zirconia (Katana KT 10) and then ground or polished. Rounded rod specimens were fabricated from heat-pressed lithium disilicate glass ceramic (e.max press LT A3) and then glazed or polished. A sliding wear testing apparatus was used for wear testing. Wear of glazed rods was greater than that of polished rods when they were abraded with ground zirconia, ground porcelain, polished porcelain, or polished lithium disilicate ceramics. For both glazed and polished rods, wear was greater when the rods were abraded with ground plates. The findings indicate that application of a polished surface rather than a glazed surface is recommended for single restorations made of heat-pressed lithium disilicate material. In addition, care must be taken when polishing opposing materials, especially those used in occlusal contact areas. (J Oral Sci 58, 117-123, 2016).

Microscopic machining mechanism of polishing based on vibrations of liquid

International Nuclear Information System (INIS)

Huang, Z G; Guo, Z N; Chen, X; Yu, Z Q; Yu, T M; Lee, W B

2007-01-01

A molecular dynamics method has been applied to study the mechanism of polishing based on vibrations of liquid. Movements of polishing particles and formations of impact dents are simulated and discussed. The abrasive effect between particle and machined substrate is evaluated empirically. Polishing qualities, including roughness and fractal character under multiple impacts, are obtained by numerical methods. Results show that the particle will vibrate and roll viscously on the substrate. Press, tear and self-organization effects will be responsible for the formation of impact dents. Simulation results are compared with experimental data to verify the conclusions

Introduction: Training in reproductive endocrinology and infertility: meeting worldwide needs.

Science.gov (United States)

de Ziegler, Dominique; Meldrum, David R

2015-07-01

Training in reproductive endocrinology (REI) and its male variant, andrology, has been profoundly influenced by the central role captured by assisted reproductive technologies (ART). The marked differences in financial, regulatory, and societal/ethical restrictions on ART in different countries of the world also prominently influence the clinical management of infertility. Training should strive for comprehensive teaching of all medically indicated procedures, even if only to optimize cross-border care. Better international standardization of infertility practices and training would benefit worldwide infertility care and should be promoted by international societies. Copyright © 2015. Published by Elsevier Inc.

Models of nanoparticles movement, collision, and friction in chemical mechanical polishing (CMP)

Energy Technology Data Exchange (ETDEWEB)

Ilie, Filip, E-mail: filip@meca.omtr.pub.ro [Polytechnic University of Bucharest, Department of Machine Elements and Tribology (Romania)

2012-03-15

Nanoparticles have been widely used in polishing slurry such as chemical mechanical polishing (CMP) process. The movement of nanoparticles in polishing slurry and the interaction between nanoparticles and solid surface are very important to obtain an atomic smooth surface in CMP process. Polishing slurry contains abrasive nanoparticles (with the size range of about 10-100 nm) and chemical reagents. Abrasive nanoparticles and hydrodynamic pressure are considered to cause the polishing effect. Nanoparticles behavior in the slurry with power-law viscosity shows great effect on the wafer surface in polishing process. CMP is now a standard process of integrated circuit manufacturing at nanoscale. Various models can dynamically predict the evolution of surface topography for any time point during CMP. To research, using a combination of individual nanoscale friction measurements for CMP of SiO{sub 2}, in an analytical model, to sum these effects, and the results scale CMP experiments, can guide the research and validate the model. CMP endpoint measurements, such as those from motor current traces, enable verification of model predictions, relating to friction and wear in CMP and surface topography evolution for different types of CMP processes and patterned chips. In this article, we explore models of the microscopic frictional force based on the surface topography and present both experimental and theoretical studies on the movement of nanoparticles in polishing slurry and collision between nanoparticles, as well as between the particles and solid surfaces in time of process CMP. Experimental results have proved that the nanoparticle size and slurry properties have great effects on the polishing results. The effects of the nanoparticle size and the slurry film thickness are also discussed.

Effects of air-polishing powders on color stability of composite resins.

Science.gov (United States)

Güler, Ahmet Umut; Duran, Ibrahim; Yücel, Ali Çağin; Ozkan, Pelin

2011-10-01

The purpose of this study was to investigate the effect of different air-polishing powders on the color stability of different types of composite resin restorative materials. Thirty cylindrical specimens (15×2 mm) were prepared for each of 7 composite resin restorative materials. All specimens were polished with a series of aluminum oxide polishing discs (Sof-Lex). The prepared specimens of each composite resin were randomly divided into 3 groups of 10 specimens each, for control (Group-C) and two air-powder applications (Group-CP: Cavitron Prophy-Jet; Group-PS: Sirona ProSmile prophylaxis powder). A standard air-polishing unit (ProSmile Handly) was used. All specimens were air-powdered for 10 s at 4-bar pressure. The distance of the spray nosel from the specimens was approximately 10 mm and angulation of the nosel was 90°. Specimens were stored in 100 mL of coffee (Nescafe Classic) for 24 h at 37°C. Color measurement of all specimens was recorded before and after exposure to staining agent with a colorimeter (Minolta CR-300). Color differences (∆E*) between the 2 color measurements (baseline and after 24 h storage) were calculated. The data were analyzed with a 2-way ANOVA test, and mean values were compared by the Tukey HSD test (p.05) and these groups demonstrated the highest ∆E* values. For Filtek Silorane and IntenS, the highest ∆E* values were observed in Group-PS. The lowest ∆E* values for all composite resin groups were observed in Group-C. When comparing the 7 composite resin restorative materials, Aelite Aesthetic Enemal demonstrated significantly less ∆E* values than the other composite resins tested. The highest ∆E* values were observed in Quixfil. Except for Quixfil, all control groups of composite resins that were polished Sof-Lex exhibited clinically acceptable ∆E values (<3.7). Air-polishing applications increased the color change for all composite resin restorative materials tested. Composite restorations may require re-polishing

Effects of air-polishing powders on color stability of composite resins

Directory of Open Access Journals (Sweden)

Ahmet Umut Güler

2011-10-01

Full Text Available OBJECTIVES: The purpose of this study was to investigate the effect of different air-polishing powders on the color stability of different types of composite resin restorative materials. MATERIAL AND METHODS: Thirty cylindrical specimens (15×2 mm were prepared for each of 7 composite resin restorative materials. All specimens were polished with a series of aluminum oxide polishing discs (Sof-Lex. The prepared specimens of each composite resin were randomly divided into 3 groups of 10 specimens each, for control (Group-C and two air-powder applications (Group-CP: Cavitron Prophy-Jet; Group-PS: Sirona ProSmile prophylaxis powder. A standard air-polishing unit (ProSmile Handly was used. All specimens were air-powdered for 10 s at 4-bar pressure. The distance of the spray nosel from the specimens was approximately 10 mm and angulation of the nosel was 90°. Specimens were stored in 100 mL of coffee (Nescafe Classic for 24 h at 37°C. Color measurement of all specimens was recorded before and after exposure to staining agent with a colorimeter (Minolta CR-300. Color differences (∆E* between the 2 color measurements (baseline and after 24 h storage were calculated. The data were analyzed with a 2-way ANOVA test, and mean values were compared by the Tukey HSD test (p.05 and these groups demonstrated the highest ∆E* values. For Filtek Silorane and IntenS, the highest ∆E* values were observed in Group-PS. The lowest ∆E* values for all composite resin groups were observed in Group-C. When comparing the 7 composite resin restorative materials, Aelite Aesthetic Enemal demonstrated significantly less ∆E* values than the other composite resins tested. The highest ∆E* values were observed in Quixfil. CONCLUSION: Except for Quixfil, all control groups of composite resins that were polished Sof-Lex exhibited clinically acceptable ∆E values (<3.7. Air-polishing applications increased the color change for all composite resin restorative materials

Material removal mechanisms in electrochemical-mechanical polishing of tantalum

International Nuclear Information System (INIS)

Gao, F.; Liang, H.

2009-01-01

Material removal mechanisms in tantalum chemical-mechanical polishing (CMP) and electrochemical-mechanical polishing (ECMP) were investigated using the single frequency electrochemical impedance spectroscopy (EIS). Through measuring the impedance of the tantalum surface, the single frequency EIS scan made it possible to observe the CMP and ECMP processes in situ. The impedance results presented competing mechanisms of removal and formation of a surface oxide layer of tantalum. Analysis indicated that the thickness of the oxide layer formed during polishing was related to the mechanical power correlated to the friction force and the rotating speed. Furthermore, the rate of growth and removal of the oxide film was a function of the mechanical power. This understanding is beneficial for optimization of CMP and ECMP processes.

[Polish medical ethics in the period 1945-1980].

Science.gov (United States)

Wichrowski, Marek

2003-01-01

The purpose of this article is o present that main currents of Polish medical ethics in the years 1945-1980, which the author treats as the 'prehistory' of Poland's contemporary bioethics. The author begins by ascertaining the post-war disappearance of two Polish traditions--that of the Warsaw school of philosopher-physicians (known in the West as the Polish School of Philosophy of Medicine) and the Lwów-Warsaw School of Philosophy. The political system that come into being after 1945 was not conducive to the development of medical ethics, but several clear orientations may be discerned in the utterances of physicians, lawyers, moral technologlans and academic philosophers. The analysis begins with Catholic ethics in its archaic 1950s-vintage form. The author then presents the thinking of ethicians Independent of both the Church and Marxism (the milieu of the journal 'Etyka') as well as the deontological writings of physicians.

Polish adaptation of scoliosis research society-22 questionnaire.

Science.gov (United States)

Glowacki, Maciej; Misterska, Ewa; Laurentowska, Maria; Mankowski, Przemyslaw

2009-05-01

Polish adaptation of the original version of Scoliosis Research Society (SRS) instrument. The transcultural adaptation of SRS-22 and evaluation of its internal consistency. High psychometric value of the SRS-22 Questionnaire has made it an effective evaluation instrument in clinically assessing the functional status of patients with adolescent idiopathic scoliosis. First, 2 translators translated the original version into Polish. Afterwards, the translators identified differences between the translations and produced a consensus version. In the third stage, 2 native English speakers produced back translations. Finally, a team of 2 orthopedic surgeons, translators, a statistician and a psychologist reviewed all the translations to produce a prefinal version. The questionnaire was administered to 60 girls at the age of 16.6, SD 2.0 with adolescent idiopathic scoliosis treated with the Cotrel-Dubousset method in Pediatric Orthopaedics and Traumatology Clinic in Poznań. The internal consistency in the Polish version equaled 0.89 for the overall result and 0.81 for function, 0.81 for pain, 0.80 for mental health, 0.77 for self-image, and 0.69 for treatment satisfaction domains, respectively. The Polish version of SRS-22 is characterized by high internal consistency for all domains and for the overall score, which makes it an evaluation tool after surgical treatment compatible with the original SRS-22.

SAFETY PLATFORM OF POLISH TRANSPORT

Directory of Open Access Journals (Sweden)

Katarzyna CHRUZIK

2016-03-01

Full Text Available Analyzing the level of Polish transport safety culture can be seen that it is now dependent on the culture of safety management within the organization and the requirements and recommendations of law in this field for different modes of transport (air, rail, road, water. Of the four basic types of transport requirements are widely developed in the aviation, rail, and water – the sea. In order to harmonize the requirements for transport safety so it appears advisable to develop a platform for exchange of safety information for different modes of transport, and the development of good practices multimodal offering the possibility of improving Polish transport safety. Described in the publication of the proposal in addition to the alignment platform experience and knowledge in the field of transport safety in all its kinds, it can also be a tool for perfecting new operators of public transport.

Effect finishing and polishing procedures on the surface roughness of IPS Empress 2 ceramic.

Science.gov (United States)

Boaventura, Juliana Maria Capelozza; Nishida, Rodrigo; Elossais, André Afif; Lima, Darlon Martins; Reis, José Mauricio Santos Nunes; Campos, Edson Alves; de Andrade, Marcelo Ferrarezi

2013-01-01

To evaluate the surface roughness of IPS Empress 2 ceramic when treated with different finishing/polishing protocols. Sixteen specimens of IPS Empress 2 ceramic were made from wax patterns obtained using a stainless steel split mold. The specimens were glazed (Stage 0-S0, control) and divided into two groups. The specimens in Group 1 (G1) were finished/polished with a KG Sorensen diamond point (S1), followed by KG Sorensen siliconized points (S2) and final polishing with diamond polish paste (S3). In Group 2 (G2), the specimens were finished/polished using a Shofu diamond point (S1), as well as Shofu siliconized points (S2) and final polishing was performed using Porcelize paste (S3). After glazing (S0) and following each polishing procedure (S1, S2 or S3), the surface roughness was measured using TALYSURF Series 2. The average surface roughness results were analyzed using ANOVA followed by Tukey post-hoc tests (α = 0.01) RESULTS: All of the polishing procedures yielded higher surface roughness values when compared to the control group (S0). S3 yielded lower surface roughness values when compared to S1 and S2. The proposed treatments negatively affected the surface roughness of the glazed IPS Empress 2 ceramic.

The effects of different polishing techniques on the staining resistance of CAD/CAM resin-ceramics

Science.gov (United States)

Demirci, Tevfik; Demirci, Gamze; Sagsoz, Nurdan Polat; Yildiz, Mehmet

2016-01-01

PURPOSE The purposes of this study were to evaluate the staining resistance of CAD/CAM resin-ceramics polished with different techniques and to determine the effectiveness of the polishing techniques on resin-ceramics, comparing it with that of a glazed glass-ceramic. MATERIALS AND METHODS Four different CAD/CAM ceramics (feldspathic ceramic: C-CEREC Blocs, (SIRONA) and three resin-ceramics: L-Lava Ultimate, (3M ESPE), E-Enamic, (VITA) and CS-CeraSmart, (GC)) and one light cure composite resin: ME-Clearfil Majesty Esthetic (Kuraray) were used. Only C samples were glazed (gl). Other restorations were divided into four groups according to the polishing technique: nonpolished control group (c), a group polished with light cure liquid polish (Biscover LV BISCO) (bb), a group polished with ceramic polishing kit (Diapol, EVE) (cd), and a group polished with composite polishing kit (Clearfil Twist Dia, Kuraray) (kc). Glazed C samples and the polished samples were further divided into four subgroups and immersed into different solutions: distilled water, tea, coffee, and fermented black carrot juice. Eight samples (8 × 8 × 1 mm) were prepared for each subgroup. According to CIELab system, four color measurements were made: before immersion, immersion after 1 day, after 1 week, and after 1 month. Data were analyzed with repeated measures of ANOVA (α=.05). RESULTS The highest staining resistance was found in gl samples. There was no difference among gl, kc and cd (P>.05). Staining resistance of gl was significantly higher than that of bb (PCeramic and composite polishing kits can be used for resin ceramics as a counterpart of glazing procedure used for full ceramic materials. Liquid polish has limited indications for resin ceramics. PMID:28018558

High voltage performance of a dc photoemission electron gun with centrifugal barrel-polished electrodes

Science.gov (United States)

Hernandez-Garcia, C.; Bullard, D.; Hannon, F.; Wang, Y.; Poelker, M.

2017-09-01

The design and fabrication of electrodes for direct current (dc) high voltage photoemission electron guns can significantly influence their performance, most notably in terms of maximum achievable bias voltage. Proper electrostatic design of the triple-point junction shield electrode minimizes the risk of electrical breakdown (arcing) along the insulator-cable plug interface, while the electrode shape is designed to maintain work, we describe a centrifugal barrel-polishing technique commonly used for polishing the interior surface of superconducting radio frequency cavities but implemented here for the first time to polish electrodes for dc high voltage photoguns. The technique reduced polishing time from weeks to hours while providing surface roughness comparable to that obtained with diamond-paste polishing and with unprecedented consistency between different electrode samples. We present electrode design considerations and high voltage conditioning results to 360 kV (˜11 MV/m), comparing barrel-polished electrode performance to that of diamond-paste polished electrodes. Tests were performed using a dc high voltage photogun with an inverted-geometry ceramic insulator design.

Polishing and toothbrushing alters the surface roughness and gloss of composite resins.

Science.gov (United States)

Kamonkhantikul, Krid; Arksornnukit, Mansuang; Takahashi, Hidekazu; Kanehira, Masafumi; Finger, Werner J

2014-01-01

This study aimed to investigate the surface roughness and gloss of composite resins after using two polishing systems and toothbrushing. Six composite resins (Durafill VS, Filtek Z250, Filtek Z350 XT, Kalore, Venus Diamond, and Venus Pearl) were evaluated after polishing with two polishing systems (Sof-Lex, Venus Supra) and after toothbrushing up to 40,000 cycles. Surface roughness (Ra) and gloss were determined for each composite resin group (n=6) after silicon carbide paper grinding, polishing, and toothbrushing. Two-way ANOVA indicated significant differences in both Ra and gloss between measuring stages for the composite resins tested, except Venus Pearl, which showed significant differences only in gloss. After polishing, the Filtek Z350 XT, Kalore, and Venus Diamond showed significant increases in Ra, while all composite resin groups except the Filtek Z350 XT and Durafill VS with Sof-Lex showed increases in gloss. After toothbrushing, all composite resin demonstrated increases in Ra and decreases in gloss.

Polish students at the Académie Julian until 1919

Directory of Open Access Journals (Sweden)

Zgórniak, Marek

2012-08-01

Full Text Available The subject of the article is the presence of Polish students in the most important private artistic school in Paris in the second half of the 19thcentury. The extant records regarding the atelier for male students made it possible to compile a list of about 165 Polish painters and sculptors studying there in the period from 1880 to 1919. The text presents the criteria used when preparing the list and the diagrams show the fluctuations in registration and the number of Polish artists in particular ateliers in successive years. The observations contained in the article have a summary nature and are illustrated only with selected examples.

Neologisms in bilingual digital dictionaries (on the example of Bulgarian-Polish dictionary

Directory of Open Access Journals (Sweden)

Ludmila Dimitrova

2015-11-01

Full Text Available Neologisms in bilingual digital dictionaries (on the example of Bulgarian-Polish dictionary The paper discusses the presentation of neologisms in the recent version of the Bulgarian-Polish digital dictionary. We also continue the discussion of important problems related to the classifiers of the verbs as headwords of the digital dictionary entries. We analyze some examples from ongoing experimental version of the Bulgarian-Polish digital dictionary.

[A study of different polishing techniques for amalgams and glass-cermet cement by scanning electron microscope (SEM)].

Science.gov (United States)

Kakaboura, A; Vougiouklakis, G; Argiri, G

1989-01-01

Finishing and polishing an amalgam restoration, is considered as an important and necessary step of the restorative procedure. Various polishing techniques have been recommended to success a smooth amalgam surface. The aim of this study was to investigate the influence of three different polishing treatments on the marginal integrity and surface smoothness of restorations made of three commercially available amalgams and a glass-cermet cement. The materials used were the amalgams, Amalcap (Vivadent), Dispersalloy (Johnson and Johnson), Duralloy (Degussa) and the glass-cermet Katac-Silver (ESPE). The occlusal surfaces of the restorations were polished by the methods: I) round bur, No4-rubber cup-zinc oxide paste in a small brush, II) round bur No 4-bur-brown, green and super green (Shofu) polishing cups and points successively and III) amalgam polishing bur of 12-blades-smooth amalgam polishing bur. Photographs from unpolished and polished surfaces of the restorations, were taken with scanning electron microscope, to evaluate the polishing techniques. An improvement of marginal integrity and surface smoothness of all amalgam restorations was observed after the specimens had been polished with the three techniques. Method II, included Shofu polishers, proved the best results in comparison to the methods I and III. Polishing of glass-cermet cement was impossible with the examined techniques.

Adaptation of the ORTHO-15 test to Polish women and men.

Science.gov (United States)

Brytek-Matera, Anna; Krupa, Magdalena; Poggiogalle, Eleonora; Donini, Lorenzo Maria

2014-03-01

There is a lack of Polish tools to measure behaviour related to orthorexia nervosa. The purpose of the present study was to validate the Polish version of the ORTHO-15 test. 341 women and 59 men (N = 400) were recruited, whose age ranged from 18 to 35 years. Mean age was 23.09 years (SD = 3.14) in women and 24.02 years (SD = 3.87) in men. The ORTHO-15 test and the EAT-26 test were used in the present study. Factor analysis (exploratory and confirmatory analysis) was used in the present study. Exploratory factor analysis performed on the initial 15 items from a random split half of the study group suggested a nine-item two-factor structure. Confirmatory factor analysis performed on the second randomly selected half of the study group supported this two-factor structure of the ORTHO-15 test. The Polish version of the ORTHO-15 test demonstrated an internal consistency (Cronbach's alpha) equal to 0.644. The Polish version of the ORTHO-15 test is a reliable and valuable instrument to assess obsessive attitudes related to healthy and proper nutrition in Polish female and male population.

Gloss and surface roughness produced by polishing kits on resin composites.

Science.gov (United States)

Sadidzadeh, Ramtin; Cakir, Deniz; Ramp, Lance C; Burgess, John O

2010-08-01

To compare in vitro the surface roughness (Ra) and gloss (G) produced by three conventional and one experimental polishing kits on four resin composites. 24 discs were prepared (d = 12 mm, t = 4 mm) for each resin composite: Filtek Supreme Plus Body/A2 (FSB), Yellow Translucent (FST), Heliomolar/A2 (HM), and EsthetX/A2 (EX) following the manufacturers' instructions. They were finished with 320 grit silicon carbide paper for 80 seconds each. Polishing systems: Sof-Lex, Enhance-Pogo, Astropol and Experimental Discs/EXL-695, were applied following manufacturers' instructions. Each specimen was ultrasonically cleaned with distilled water and dried. Gloss and Ra were measured with a small area glossmeter (Novo-curve) and non-contact profilometer (Proscan 2000) following ISO 4288, respectively. The results were evaluated by two-way ANOVA followed by separate one-way ANOVA and Tukey/Kramer test (P = 0.05). There was a significant interaction of surface roughness and gloss between the composites and polishing systems (P gloss was obtained for FSB composite polished with the Experimental kit. The experimental polishing system produced smoothest surfaces (P gloss (P < 0.05).

[Adhesion of oral microorganisms on dental porcelain polished and glazed].

Science.gov (United States)

Wang, Yi-ning; Wen, Guo-jiang; Shi, Bin; Pan, Xin-hua

2003-09-01

This study compared the roughness of porcelain polished or glazed surfaces and the adhesion of oral streptococcus mutans to them in vitro. 30 porcelain samples were made. Porcelain samples in group A were polished with diamond paste. Porcelain samples were glazed in group B and were polished with Al2O3 (240#) bur in group C. Their roughness values were measured by profilometer. Standardized cell suspensions were incubated with test samples for one hour at 37 degrees C, then retained cells were counted by image analysis (percentage area of a microscopic field covered by cells). Roughness values of group A, B, C were respectively (0.1987 +/- 0.057) microm, (0.1990 +/- 0.091) microm, (0.4260 +/- 0.174) microm. There was no significantly difference between group A and group B. The roughness samples in group C were significantly rougher than that in the other groups. The amount of retained cells in group A, group B, group C was respectively (15.92 +/- 4.37)%, (16.39 +/- 6.31)% and (41.48 +/- 12.1)%. There was no significant difference between the cell adhesion on porcelain surface glazed and polished, but more bacteria adhered on the porcelain surface in group C. Porcelain surface polished treatment was clinically acceptable compared with its glazed. They all exhibited the least amount of bacteria adhesion. The more porcelain surface was rough, the more bacteria adhered on it.

Electrochemical Polishing Applications and EIS of a Vitamin B4-Based Ionic Liquid

International Nuclear Information System (INIS)

Wixtrom, Alex I.; Buhler, Jessica E.; Reece, Charles E.; Abdel-Fattah, Tarek M.

2013-01-01

Modern particle accelerators require minimal interior surface roughness for Niobium superconducting radio frequency (SRF) cavities. Polishing of the Nb is currently achieved via electrochemical polishing with concentrated mixtures of sulfuric and hydrofluoric acids. This acid-based approach is effective at reducing the surface roughness to acceptable levels for SRF use, but due to acid-related hazards and extra costs (including safe disposal of used polishing solutions), an acid-free method would be preferable. This study focuses on an alternative electrochemical polishing method for Nb, using a novel ionic liquid solution containing choline chloride, also known as Vitamin B 4 (VB 4 ). Potentiostatic electrochemical impedance spectroscopy (EIS) was also performed on the VB4-based system. Nb polished using the VB4-based method was found to have a final surface roughness comparable to that achieved via the acid-based method, as assessed by atomic force microscopy (AFM). These findings indicate that acid-free VB 4 -based electrochemical polishing of Nb represents a promising replacement for acid-based methods of SRF cavity preparation

Time-dependent protection of ground and polished Cu using graphene film

International Nuclear Information System (INIS)

Dong, Yuhua; Liu, Qingqing; Zhou, Qiong

2015-01-01

Highlights: • Graphene was deposited on polished and ground Cu sheets by CVD. • Graphene films provide better protection to polished Cu for short time. • Multilayer graphene films provide better protection for short time. - Abstract: Graphene was deposited on Cu sheets with different morphologies by chemical vapor deposition. Scanning electron microscopy (SEM) analysis indicated that the morphology of the Cu sheet affected the graphene film properties. Electrochemical impedance spectroscopy measurements showed that the graphene film did not effectively protect Cu against corrosion because of prolonged exposure to ionic environments (3.5 wt.% NaCl solution). For short durations, graphene films provided better protection to polished Cu than ground Cu. Prolonged electrolyte immersion of graphene-coated Cu samples showed that the graphene film from the polished Cu surface was detached more easily than that from ground Cu

Effect of polishing time and pressure on quality characteristics of rice grain

International Nuclear Information System (INIS)

Karim, M.A.

2002-01-01

Since totally unpolished rice has poor cooking quality, a certain amount of polishing for the removal of the outermost bran layers is essential. To determine the best combination of polishing time and pressure with respect to obtaining optimum quantity/quality, the brown rice (head grains) of a rice strain 4048 was milled for 10, 20, 30 and 40 seconds against 1,2,3,4 and 5 lbs pressure in a Burrows McGill Polisher No. 3. the quality characteristics studied were: total milling recovery, head rice recovery, whiteness of milled rice, protein content of grain, grain length and bursting upon cooking. Both, total milled rice and head rice reduced while the whiteness of milled rice improved significantly with an increase in polishing time and or pressure. The protein content decreased gradually with an increase in time and pressure of milling but the effect was non significant. The cooked grain length increased with an increase in milling degree up to a stage, beyond which it declined. The increase in bursting of grains on cooking. A combination of 20 seconds polishing time with 2 lbs pressure or 20 seconds polishing time with 3 lbs pressure was found to be the best combination of obtaining the optimum quality as well as the quality of milled rice.(author)

How to Investigate Polish Clusters’ Attractiveness for Inward FDI? Addressing Ambiguity Problem

Directory of Open Access Journals (Sweden)

Götz Marta

2014-09-01

Full Text Available The aim of the paper is to assess whether, and in what fashion, managers of Polish cluster organizations perceive the attractiveness of foreign direct investment in Polish clusters This research is exploratory and qualitative in nature. The complex nature of Polish clusters, which can benefit from and be competitively challenged by, FDI are identified and a conceptual framework for assessing that nature is proposed; specifically, research using the grounded theory method (GTM.

Robotic Automation in Computer Controlled Polishing

Science.gov (United States)

Walker, D. D.; Yu, G.; Bibby, M.; Dunn, C.; Li, H.; Wu, Y.; Zheng, X.; Zhang, P.

2016-02-01

We first present a Case Study - the manufacture of 1.4 m prototype mirror-segments for the European Extremely Large Telescope, undertaken by the National Facility for Ultra Precision Surfaces, at the OpTIC facility operated by Glyndwr University. Scale-up to serial-manufacture demands delivery of a 1.4 m off-axis aspheric hexagonal segment with surface precision robots and computer numerically controlled ('CNC') polishing machines for optical fabrication. The objective was not to assess which is superior. Rather, it was to understand for the first time their complementary properties, leading us to operate them together as a unit, integrated in hardware and software. Three key areas are reported. First is the novel use of robots to automate currently-manual operations on CNC polishing machines, to improve work-throughput, mitigate risk of damage to parts, and reduce dependence on highly-skilled staff. Second is the use of robots to pre-process surfaces prior to CNC polishing, to reduce total process time. The third draws the threads together, describing our vision of the automated manufacturing cell, where the operator interacts at cell rather than machine level. This promises to deliver a step-change in end-to-end manufacturing times and costs, compared with either platform used on its own or, indeed, the state-of-the-art used elsewhere.

ROUGHNESS ANALYSIS OF VARIOUSLY POLISHED NIOBIUM SURFACES

Energy Technology Data Exchange (ETDEWEB)

Ribeill, G.; Reece, C.

2008-01-01

Niobium superconducting radio frequency (SRF) cavities have gained widespread use in accelerator systems. It has been shown that surface roughness is a determining factor in the cavities’ effi ciency and maximum accelerating potential achievable through this technology. Irregularities in the surface can lead to spot heating, undesirable local electrical fi eld enhancement and electron multipacting. Surface quality is typically ensured through the use of acid etching in a Buffered Chemical Polish (BCP) bath and electropolishing (EP). In this study, the effects of these techniques on surface morphology have been investigated in depth. The surface of niobium samples polished using different combinations of these techniques has been characterized through atomic force microscopy (AFM) and stylus profi lometry across a range of length scales. The surface morphology was analyzed using spectral techniques to determine roughness and characteristic dimensions. Experimentation has shown that this method is a valuable tool that provides quantitative information about surface roughness at different length scales. It has demonstrated that light BCP pretreatment and lower electrolyte temperature favors a smoother electropolish. These results will allow for the design of a superior polishing process for niobium SRF cavities and therefore increased accelerator operating effi ciency and power.

Removing the residual cellulase by graphene oxide to recycle the bio-polishing effluent for dyeing cotton fabrics.

Science.gov (United States)

Wang, Rui; Yang, Chao; Fang, Kuanjun; Cai, Yuqing; Hao, Longyun

2018-02-01

In this research, a stable graphene oxide (GO) suspension was prepared by chemical reduction method from graphite powder. By TEM, the irregular GO sheets with single-atom-layered structure could be observed. The zeta potentials measurement indicated the surface charges of GO were strongly related to pH. BET analysis showed the GO had a specific surface area of 30.7 m 2 /g and pore volume of 0.10 cm 3 /g. When the GO was used to remove the residual cellulase in bio-polishing effluent, it was found the removal capacity reached its maximum value at the pH 4-5. The kinetics studies showed that the removal process of cellulase followed a pseudo-second-order kinetic model with a rate constant (k 2 ) of 0.276 × 10 -3  g/mg min and equilibrium adsorption capacity of 278.55 mg/g, respectively. By plotting the adsorption isotherms, it was found the Langmuir model fitted the experimental data well with a cellulase adsorption capacity of 574.71 mg/g, indicating the adsorption of cellulase by GO in a monolayer manner. When dyeing the cotton fabrics with reactive dyes, it was found that the cotton fabrics could acquire similar color properties in the recycled bio-polishing effluent as in fresh water, meaning the effectiveness of removing cellulase by GO and the feasibility of recycling the bio-polishing effluent. Copyright © 2017 Elsevier Ltd. All rights reserved.

Multi-objective optimization of circular magnetic abrasive polishing of SUS304 and Cu materials

Energy Technology Data Exchange (ETDEWEB)

Nguyen, NhatTan; Yin, ShaoHui; Chen, FengJun; Yin, HanFeng [Hunan University, Changsha (China); Pham, VanThoan [Hanoi University, Hanoi (Viet Nam); Tran, TrongNhan [Industrial University of Ho Chi Minh City, HCM City (Viet Nam)

2016-06-15

In this paper, a Multi-objective particle swarm optimization algorithm (MOPSOA) is applied to optimize surface roughness of workpiece after circular magnetic abrasive polishing. The most important parameters of polishing model, namely current, gap between pole and workpiece, spindle speed and polishing time, were considered in this approach. The objective functions of the MOPSOA depend on the quality of surface roughness of polishing materials with both simultaneous surfaces (Ra1, Ra2), which are determined by means of experimental approach with the aid of circular magnetic field. Finally, the effectiveness of the approach is compared between the optimal results with the experimental data. The results show that the new proposed polishing optimization method is more feasible.

Routine and new techniques in nuclearmedicine and endocrinology

Energy Technology Data Exchange (ETDEWEB)

Galvan, G [Landeskrankenanstalten Salzburg (Austria). Inst. fuer Nuklear medizin und Endokrinologie

1980-10-15

Nuclear medicine: Scintiscanning of the kidneys and the renal clearance of radionuclides give us separate information about the function of each kidney. Scintiscanning of the lungs has become very important for the diagnosis of embolisms. Scintiscanning is also an important method for the diagnosis of skeletal diseases (inflamation of neoplasms, especially metastases) or for the diagnosis of introhepatic neoplasms. New nuclear methods evaluating dynamic processes in the cardiovascular system will become of clinical relevance. Endocrinology: A number of radioimmunoassays (especially of thyroxine, triiodthyronine, TSH, ACTH, cortisol, androgeus, estrogeus, progesterone, LH, FSH and prolaction) the isolation and synthesis of hypothalamic releasing hormones, scintiscanning of the thyreoid and the adrenal glands and computed tomography give us information about the endocrine system. In particular, the new radioimmunoassay of prolactin has taught us new aspects of the function of this hormone and the etiology of hyperprolactinemia.

Etymology in the Polish Academy of Sciences Great Dictionary of ...

African Journals Online (AJOL)

The article offers an insight into etymological information provided in the Polish Academy of Sciences Great Dictionary of Polish (Pol. Wielki słownik języka polskiego PAN, WSJP PAN). The dictionary and the rules of producing the entries are briefly presented. These rules influence the way of working on etymology within ...

Antecedents of Accelerated Internationalisation of Polish and Czech Small and Medium-Sized Enterprises

Directory of Open Access Journals (Sweden)

Izabela Kowalik

2017-09-01

Full Text Available Objective: The study goal was the investigation of relationships between accelerated internationalisation descriptors and antecedent firm- and entrepreneur-related factors in Polish and Czech SMEs. Research Design & Methods: In order to compare Polish and Czech companies, the data collected in two independent studies were used. The study of 233 Polish companies was conducted with the use of CATI method in 2014; 108 Czech companies were surveyed in 2013/2014 with the use of CAWI method. In both samples half of the surveyed SME-exporters were conforming to the accelerated internationalisation criteria. Findings: In both samples the “global vision” elements and company internationalisation scale and speed were interrelated. In the Polish companies this relationship was moderated by company size. There was the lack of strong positive relationships between innovativeness and internationalisation speed and scale in both samples. Implications & Recommendations:The managerial mindset has a decisive role for accelerated internationalisation in both Czech and Polish SMEs. The innovativeness of offering is not indispensable for fast foreign expansion. Larger companies may expand abroad faster if they have internationally oriented managers. Contribution & Value Added:This work addresses a research gap concerning idiosyncrasies of internationalisation antecedents in Polish and Czech enterprises. As the results show, there is no common internationalisation pattern for Polish and Czech SMEs.

Effect of grinding and polishing on roughness and strength of zirconia.

Science.gov (United States)

Khayat, Waad; Chebib, Najla; Finkelman, Matthew; Khayat, Samer; Ali, Ala

2018-04-01

The clinical applications of high-translucency monolithic zirconia restorations have increased. Chairside and laboratory adjustments of these restorations are inevitable, which may lead to increased roughness and reduced strength. The influence of grinding and polishing on high-translucency zirconia has not been investigated. The purpose of this in vitro study was to compare the roughness averages (Ra) of ground and polished zirconia and investigate whether roughness influenced strength after aging. High-translucency zirconia disks were milled, sintered, and glazed according to the manufacturer's recommendations. Specimens were randomized to 4 equal groups. Group G received only grinding; groups GPB and GPK received grinding and polishing with different polishing systems; and group C was the (unground) control group. All specimens were subjected to hydrothermal aging in an autoclave at 134°C at 200 kPa for 3 hours. Roughness average was measured using a 3-dimensional (3D) optical interferometer at baseline (Ra1), after grinding and polishing (Ra2), and after aging (Ra3). A biaxial flexural strength test was performed at a rate of 0.5 mm/min. Statistical analyses were performed using commercial software (α=.05). Group G showed a significantly higher mean value of Ra3 (1.96 ±0.32 μm) than polished and glazed groups (P.05). Compared with baseline, the roughness of groups G and GPB increased significantly after surface treatments and after aging, whereas aging did not significantly influence the roughness of groups GPK or C. Group G showed the lowest mean value of biaxial flexural strength (879.01 ±157.99 MPa), and the highest value was achieved by group C (962.40 ±113.84 MPa); no statistically significant differences were found among groups (P>.05). Additionally, no significant correlation was detected between the Ra and flexural strength of zirconia. Grinding increased the roughness of zirconia restorations, whereas proper polishing resulted in smoothness

Acoustic Emission Based In-process Monitoring in Robot Assisted Polishing

DEFF Research Database (Denmark)

Pilny, Lukas; Bissacco, Giuliano; De Chiffre, Leonardo

The applicability of acoustic emission (AE) measurements for in-process monitoring in the Robot Assisted Polishing (RAP) process was investigated. Surface roughness measurements require interruption of the process, proper surface cleaning and measurements that sometimes necessitate removal...... improving the efficiency of the process. It also allows for intelligent process control and generally enhances the robustness and reliability of the automated RAP system in industrial applications....... of the part from the machine tool. In this study, development of surface roughness during polishing rotational symmetric surfaces by the RAP process was inferred from AE measurements. An AE sensor was placed on a polishing tool, and a cylindrical rod of Vanadis 4E steel having an initial turned surface...

Surface changes of metal alloys and high-strength ceramics after ultrasonic scaling and intraoral polishing.

Science.gov (United States)

Yoon, Hyung-In; Noh, Hyo-Mi; Park, Eun-Jin

2017-06-01

This study was to evaluate the effect of repeated ultrasonic scaling and surface polishing with intraoral polishing kits on the surface roughness of three different restorative materials. A total of 15 identical discs were fabricated with three different materials. The ultrasonic scaling was conducted for 20 seconds on the test surfaces. Subsequently, a multi-step polishing with recommended intraoral polishing kit was performed for 30 seconds. The 3D profiler and scanning electron microscopy were used to investigate surface integrity before scaling (pristine), after scaling, and after surface polishing for each material. Non-parametric Friedman and Wilcoxon signed rank sum tests were employed to statistically evaluate surface roughness changes of the pristine, scaled, and polished specimens. The level of significance was set at 0.05. Surface roughness values before scaling (pristine), after scaling, and polishing of the metal alloys were 3.02±0.34 µm, 2.44±0.72 µm, and 3.49±0.72 µm, respectively. Surface roughness of lithium disilicate increased from 2.35±1.05 µm (pristine) to 28.54±9.64 µm (scaling), and further increased after polishing (56.66±9.12 µm, P scaling (from 1.65±0.42 µm to 101.37±18.75 µm), while its surface roughness decreased after polishing (29.57±18.86 µm, P scaling significantly changed the surface integrities of lithium disilicate and zirconia. Surface polishing with multi-step intraoral kit after repeated scaling was only effective for the zirconia, while it was not for lithium disilicate.

Regresión logística: Un ejemplo de su uso en Endocrinología Logistic regression: An example of its use in Endocrinology

Directory of Open Access Journals (Sweden)

Emma Domínguez Alonso

2001-04-01

Full Text Available Se intentó un acercamiento a la regresión logística, como una de las técnicas estadísticas multivariadas de más frecuente uso en las últimas décadas, para orientar a su uso correcto. Se consideraron cuestiones de tipo práctico como número de sujetos necesarios para aplicarla, situaciones en las que está indicado su uso, tipo de variables a las que es posible aplicarla y las formas en que puede ser incluida en el modelo, interpretación de los resultados, etc. Se mostró un ejemplo de la aplicación de esta técnica en una investigación en el campo de la Endocrinología. Se concluyó que la regresión logística resulta de gran utilidad para su aplicación en cualquier campo de la investigación médica cuando necesitamos precisar el efecto de un grupo de variables, consideradas potencialmente influyentes, sobre la ocurrencia de un determinado proceso.An approach to logistic regression , as one of the most used multivariate statistical techniques in the last decades, was made to recommend its correct use. Practical questions as the number of subjects necessary for its application, the situations in which it should be used, the type of variables to which it may be applied, the way it may be included in the model, the interpretation of the results, etc., were taken into consideration. An example of the application of this technique in the field of Endocrinology was given. It was concluded that the application of logistic regression is very useful in any field of medical research when we need to determine the effect of a group of variables, potentially considered as influential, on the ocurrence of a certain process.

Emissions from the Polish power industry

International Nuclear Information System (INIS)

Uliasz-Bochenczyk, Alicja; Mokrzycki, Eugeniusz

2007-01-01

Poland is a country where power and heat energy production is based on conventional fuel combustion, above all hard coal and lignite. In power plants and combined heat and power plants, fossil fuel combustion results in emitting to the atmosphere first of all SO 2 , NO x , CO, particulate matter, greenhouse gases for instance N 2 O and CO 2 . For many years the Polish power industry has tried to reduce the emission of air contaminants to the atmosphere. The reduction is feasible on account of various methods of emission reduction, which have been advanced and applied for many years. The paper presents conventional fuels used in the Polish professional power industry, as well as the principal emission types occurring there for the last 10 years and the undertaken reduction measures

Social Interest in The Polish Doctrine of Monument Preservation

Science.gov (United States)

Antoszczyszyn, Marek

2017-10-01

The paper discusses a controversy surrounding the latest amendment to the text of the Polish Parliament Act Conservation and the Care of Monuments (2015). It is a common dictum that any edifice cannot exist without good foundations. In this particular case of the mentioned above Act, definition of monument appears to be such a basis. A social interest is one of the constituent elements of the definition mentioned above. In the first part of the paper the notion of the social interest expression has been discussed, particularly from national and international points of view. The second part of the paper comprises some examples from the Polish monument preservation experience with the use of comparison method supported by case study. Only three big Polish cities: Warsaw, Wroclaw and Szczecin are involved in the presented case study but it must be emphasized that many other places on Polish territory experienced the same. Basing on the faith of these cities, the results and discussion chapter proves fundamental discrepancy in social interest notion between national and international scopes using some analytical methods. Finally, in the discussion chapter some proposals for the future amendment of monument definition in the Act of Conservation and the Care of Monuments have been provided.

Scope of Nursing Care in Polish Intensive Care Units

Directory of Open Access Journals (Sweden)

Mariusz Wysokiński

2013-01-01

Full Text Available Introduction. The TISS-28 scale, which may be used for nursing staff scheduling in ICU, does not reflect the complete scope of nursing resulting from varied cultural and organizational conditions of individual systems of health care. Aim. The objective of the study was an attempt to provide an answer to the question what scope of nursing care provided by Polish nurses in ICU does the TISS-28 scale reflect? Material and Methods. The methods of working time measurement were used in the study. For the needs of the study, 252 hours of continuous observation (day-long observation and 3.697 time-schedule measurements were carried out. Results. The total nursing time was 4125.79 min. (68.76 hours, that is, 60.15% of the total working time of Polish nurses during the period analyzed. Based on the median test, the difference was observed on the level of χ2=16945.8, P<0.001 between the nurses’ workload resulting from performance of activities qualified into the TISS-28 scale and load resulting from performance of interventions within the scopes of care not considered in this scale in Polish ICUs. Conclusions. The original version of the TISS-28 scale does not fully reflect the workload among Polish nurses employed in ICUs.

Polish Qualitative Sociology. Insight into the future of postdisciplinary research

OpenAIRE

Konecki, Krzysztof

2014-01-01

The paper desctibes the definitions of following concepts: multidisiplinarity, interdisciplinarity, transdysciplinarity, postdisciplinarity. MOreover it discuss the meanings of a concept of discipline. It describes the place of the Polish qualitative sociology in the context of postdisciplinary research. The main question of paper is: Does the POlish Qualitative Sociology has entered the postdisciplinary phase of research? DGS, UL Krzysztof Konecki

Surface roughness of microparticulated and nanoparticulated composites after finishing and polishing procedures

Directory of Open Access Journals (Sweden)

Rosemary Arai Sadami Shinkai

Full Text Available Objective: To evaluated the surface roughness of one microparticulate resin composite Durafill (Heraeus Kulzer Weihrheim, Germany andfour nanoparticulate resins 4 Seasons (Ivoclar Vivadent, Schaan, Liechtenstein Esthet x (Dentsply, Milford, DE, USA, Point 4 and Supreme (3M-ESPE, Dental Products,St. Paul, MN, USA. Methods: After finishing with a diamond bur point (F, and polishing with silicone points of gray, green and pink color Politipit (Ivoclar Vivadent,Schaan, Liechtenstein, four stages of completion were performed, simulating one of finishing and three of polishing a resin restoration. Ten samples of each composite resin were measured for surface roughness with surface profilometer (Mitutoyo Corporation, Tokyo, Japan after each of finishing and polishing sequence.Results: The results showed that nanoparticulate and microparticulate resins presented a significant difference in the surface roughness values, in all finishing and polishing steps. Conclusion: Of the the nanoparticulate resins 4 Seasons (Ivoclar Vivadent, Schaan, Liechtenstein, Point 4 (Kerr CO, Orange, CA, USA, and also microparticulate Durafill (Heraeus Kulzer Weihrheim, Germany presented significantly lower surface roughness values after completing all the finishing and polishing stages.

Precision machining and polishing of scintillating crystals for large calorimeters and hodoscopes

International Nuclear Information System (INIS)

Wuest, C.R.; Fuchs, B.A.; Holdener, F.R.; Heck, J.L. Jr.

1994-04-01

New machining and polishing techniques have been developed for large scintillating crystal arrays such as the Barium Fluoride Electromagnetic Calorimeter for the GEM Detector at SSCL, the Crystal Clear Collaboration's cerium fluoride or lead tungstenate calorimeter at the proposed LHC and CERN, the PHENIX Detector at RHIC (barium fluoride), and the cesium iodide Calorimeter for the BaBar Detector at PEP-2 B Factory at SLAC. The machining and polishing methods to be presented in this paper provide crystalline surfaces without sub-surface damage or deformation as verified by Rutherford Back-scattering (RBS) analysis. Surface roughness of about 10--20 angstroms and sub-micron mechanical tolerances have been demonstrated on large barium fluoride crystal samples. Mass production techniques have also been developed for machining the proper angled surfaces and polishing up to five 50 cm long crystals at one time. These techniques utilize kinematic mount technology developed at LLNL to allow precision machining and polishing of complex surfaces. They will present this technology along with detailed surface studies of barium fluoride and cerium fluoride crystals polished with this technique

Developing competitive and sustainable Polish generic medicines market.

Science.gov (United States)

Simoens, Steven

2009-10-01

To descriptively analyze the policy environment surrounding the Polish generic medicines retail market. The policy analysis was based on an international literature review. Also, a simulation exercise was carried out to compute potential savings from substituting generic for originator medicines in Poland using IMS Health pharmaceutical intelligence data. Poland has a mature, high-volume, low-value generic medicines market, primarily driven by the establishment of the reference price at the price of the cheapest medicine in combination with pricing regulation and the low level of medicine prices. The practice of discounting in the distribution chain implies that the National Health Fund and patients do not capture the potential savings from a generic medicines market where companies compete on price. This high-volume market has benefited in the past from the limited availability of originator medicines and a short data exclusivity period, even though there are no incentives for physicians to prescribe generic medicines and a financial disincentive for pharmacists to dispense generic medicines. Increased generic substitution would be expected to reduce public expenditure on originator medicines by 21%. To develop a competitive and sustainable market, Poland needs to consider moving away from competition by discount to competition by price. This could be achieved by replacing maximum distribution margins by fixed margins. Also, Poland may wish to raise reference prices as a temporary measure to boost market entry for medicine classes with few generic medicines.

Acoustic emission-based in-process monitoring of surface generation in robot-assisted polishing

DEFF Research Database (Denmark)

Pilny, Lukas; Bissacco, Giuliano; De Chiffre, Leonardo

2016-01-01

The applicability of acoustic emission (AE) measurements for in-process monitoring of surface generation in the robot-assisted polishing (RAP) was investigated. Surface roughness measurements require interruption of the process, proper surface cleaning and measurements that sometimes necessitate...... automatic detection of optimal process endpoint allow intelligent process control, creating fundamental elements in development of robust fully automated RAP process for its widespread industrial application....... removal of the part from the machine tool. In this study, stabilisation of surface roughness during polishing rotational symmetric surfaces by the RAP process was monitored by AE measurements. An AE sensor was placed on a polishing arm in direct contact with a bonded abrasive polishing tool...

Effect of one-step polishing system on the color stability of nanocomposites.

Science.gov (United States)

Alawjali, S S; Lui, J L

2013-08-01

This study was to compare the effect of three different one-step polishing systems on the color stability of three different types of nanocomposites after immersion in coffee for one day and seven days and determine which nanocomposite material has the best color stability following polishing with each of the one-step polishing system. The nanocomposites tested were Tetric EvoCeram, Grandio and Herculite Précis. A total of 120 discs (40/nanocomposite, 8mm×2mm) were fabricated. Ten specimens for each nanocomposite cured under Mylar strips served as the control. The other specimens were polished with OptraPol, OneGloss and Occlubrush immersed in coffee (Nescafé) up to seven days. Color measurements were made with a spectrophotometer at baseline and after one and seven days. Two way repeated measure ANOVA, two way ANOVA and Bonferroni tests were used for statistical analyses (P<0.05). The immersion time was a significant factor in the discoloration of the nanocomposites. The effect of three one-step polishing systems on the color stability was also significant. The color change values of the materials cured against Mylar strips were the greatest. The lowest mean color change values were from the Occlubrush polished groups. The effect of the three different types of nanocomposite on the color change was significant. The highest color change values were with Tetric EvoCeram groups. The lowest color change values were with Herculite Précis groups. The color change of nanocomposite resins is affected by the type of composite, polishing procedure and the period of immersion in the staining agent. Copyright © 2012 Elsevier Ltd. All rights reserved.

Recovery of rare earths from used polishes by chemical vapor transport process

International Nuclear Information System (INIS)

Ozaki, T.; Machida, K.; Adachi, G.

1998-01-01

Full text: Rare earth oxide polishes are widely used in the glass industry because of its mechanical and chemical polishing action. The Japanese glass industry use 2000 tons per year of the polishes, and a large portion of them are thrown away after their polishing lifetime. A dry recovery processes for rare earths from the used polishes have been investigated by using a chemical vapor transport method via the formation of vapor complexes RAl n Cl 3+3n (R = rare earths). A flow type reactor with various temperature gradients was employed for the process. The used polishes were mixed with active carbon, and chlorinated with N 2 + Cl 2 mixture at 1273 K. Aluminium oxide were also chlorinated at lower temperature and the resulting AlCl 3 were introduced to the reactor. The rare earth chlorides and AlCl 3 were converted to the vapor complexes. These were driven along the temperature gradient, decomposed according to the reverse reaction, and regenerated RCl 3 . About 90 % of the used polish were chlorinated after 2 hours. Rare earth chlorides, AlCl 3 , and FeCl 3 were fully transported after 82 hours. The rare earth chlorides were mainly condensed over the temperature range 1263-903 K. On the other hand, AlCl 3 and FeCl 3 were deposited at the temperature range below 413 K. CaCl 2 and SrCl 2 were hardly transported and remained in the residue. When the temperature gradient with the smaller slope was used, mutual separation efficiencies among the rare earths was improved. The highest CeCl 3 purity of 80% was obtained in the process

Evaluation of one-step micro polishers for residual resin removal after debonding on fluorosed teeth

Directory of Open Access Journals (Sweden)

Padmalatha Challa

2014-01-01

Full Text Available Aim and objectives: To evaluate the effectiveness of one step micro polishers for residual resin removal on fluorosed teeth using scanning electron microscope (SEM. Methods and Material: 55 teeth with mild to moderate fluorosis were selected with five teeth as control. Metal brackets were bonded onto 50 teeth which were divided into 5 groups. The finishing and polishing methods which were tested include tungsten carbide burs (TCB, multistep finishing system (Sof-Lex, one step polishers (PoGo and combination of TCB with multistep and one step polishing systems. After resin removal, all the samples were examined under SEM for assessment of the enamel surface. Results: The enamel surface was closest to untouched enamel in samples finished with the PoGo one step polishers followed by Sof-Lex multistep finishing system. However, they took the longest time to finish. TCB required the shortest time for residual resin removal. Conclusions: All polishing systems produce a certain degree of damage to the enamel surface with the smoothest surface being produced by one step polishers on fluorosed teeth.

Chemical-mechanical polishing of metal and dielectric films for microelectronic applications

Science.gov (United States)

Hegde, Sharath

The demand for smaller, faster devices has led the integrated circuit (IC) industry to continually increase the device density on a chip while simultaneously reducing feature dimensions. Copper interconnects and multilevel metallization (MLM) schemes were introduced to meet some of these challenges. With the employment of MLM in the ultra-large-scale-integrated (ULSI) circuit fabrication technology, repeated planarization of different surface layers with tolerance of a few nanometers is required. Presently, chemical-mechanical planarization (CMP) is the only technique that can meet this requirement. Damascene and shallow trench isolation processes are currently used in conjunction with CMP in the fabrication of multilevel copper interconnects and isolation of devices, respectively, for advanced logic and memory devices. These processes, at some stage, require simultaneous polishing of two different materials using a single slurry that offers high polish rates, high polish selectivity to one material over the other and good post-polish surface finish. Slurries containing one kind of abrasive particles do not meet most of these demands due mainly to the unique physical and chemical properties of each abrasive. However, if a composite particle is formed that takes the advantages of different abrasives while mitigating their disadvantages, the CMP performance of resulting abrasives would be compelling. It is demonstrated that electrostatic interactions between ceria and silica particles at pH 4 can be used to produce composite particles with enhanced functionality. Zeta potential measurement and TEM images used for particle characterization show the presence of such composite particles with smaller shell particles attached onto larger core particles. Slurries containing ceria (core)/silica (shell) and silica (core)/ceria (shell) composite particles when used to polish metal and dielectric films, respectively, yield both enhanced metal and dielectric film removal rates

Mirror surface metrology and polishing for AXAF/TMA

International Nuclear Information System (INIS)

Slomba, A.; Babish, R.; Glenn, P.

1985-01-01

The achievement of the derived goals for mirror surface quality on the Advanced X-ray Astrophysics Facility (AXAF), Technology Mirror Assembly (TMA) required a combination of state-of-the-art metrology and polishing techniques. In this paper, the authors summarize the derived goals and cover the main facets of the various metrology instruments employed, as well as the philosophy and technique used in the polishing work. In addition, they show how progress was measured against the goals, using the detailed error budget for surface errors and a mathematical model for performance prediction. The metrology instruments represented a considerable advance on the state-of-the-art and fully satisfied the error budget goals for the various surface errors. They were capable of measuring the surface errors over a large range of spatial periods, from low-frequency figure errors to microroughness. The polishing was accomplished with a computer-controlled process, guided by the combined data from various metrology instruments. This process was also tailored to reduce the surface errors over the full range of spatial periods

Preparation of cerium oxide for lens polishing powder

International Nuclear Information System (INIS)

Injarean, Uthaiwan; Rodthongkom, Chouvana; Pichestapong, Pipat; Changkrurng, Kalaya

2003-10-01

Cerium is an element of rare earth group which is called lanthanide series. It is found in the ores like monazite and xenotime which are the tailings of tin mines in the south of Thailand. Cerium is used mostly as lens polishing powder besides the applications in other industries. In this study, cerium extracted from monazite ore breakdown by alkaline process was used for the preparation of lens polishing powder. Cerium hydroxide cake from the process was dissolved by hydrochloric acid and precipitated with oxalic acid. The oxalate precipitate then was calcined to oxide powder and its particle size was measured. Precipitation conditions being studied are concentration of feed cerium chloride solution, concentration of oxalic acid used for the precipitation, concentration of sulfuric acid used as precipitation control reagent and the precipitation temperature. It was found that the appropriate precipitation conditions yielded the fine oxide powder with particle size about 12μm. The oxide powder can be ground to the size of 1-3 μm which is suitable for making lens polishing powder

Infestation of Polish Agricultural Soils by Plasmodiophora Brassicae Along The Polish-Ukrainian Border

Directory of Open Access Journals (Sweden)

Jędryczka Małgorzata

2014-07-01

Full Text Available There has been a rapid, worldwide increase in oilseed rape production that has resulted in enormous intensification of oilseed rape cultivation, leading to tight rotations. This in turn, has caused an accumulation of pests as well as foliar and soil-borne diseases. Recently, clubroot has become one of the biggest concerns of oilseed rape growers. Clubroot is caused by the soil-borne protist Plasmodiophora brassicae Woronin. The pathogen may be present in groundwater, lakes, and irrigation water used in sprinkling systems. It can be easily transmitted from one field to another not only by water, but also by soil particles and dust transmitted by wind and on machinery. The aim of our overall study was to check for P. brassicae infestation of Polish agricultural soils. This paper presents the 2012 results of a study performed along the Polish-Ukrainian border in two provinces: Lublin (Lubelskie Voivodeship and the Carpathian Foothills (Podkarpackie Voivodeship, in south-east Poland. Monitoring was done in 11 counties, including nine rural and two municipal ones. In total, 40 samples were collected, out of which 36 were collected from fields located in rural areas and four from municipal areas, with two per municipal region. Each sample was collected at 8-10 sites per field, using a soil auger. The biotest to detect the presence of P. brassicae was done under greenhouse conditions using seedlings of the susceptible Brassicas: B. rapa ssp. pekinensis and the Polish variety of oilseed rape B. napus cv. Monolit. Susceptible plants grown in heavily infested soils produced galls on their roots. A county was regarded as free from the pathogen, if none of the bait plants became infected. The pathogen was found in three out of 40 fields monitored (7.5% in the Carpathian Foothill region. The fields were located in two rural counties. The pathogen was not found in Lublin province, and was also not detected in any of the municipal counties. The detection with

Long Distance Solidarity: Polish Public Opinion and the Boer War 1899–1902

Directory of Open Access Journals (Sweden)

Szlanta Piotr

2017-06-01

Full Text Available The bloody conflict which was taking place in South Africa in the years 1899-1902 was followed with a great interest by Polish public opinion. Its greatest part strongly sympathized with the Boer republics. Their burgers were idealized and presented by the Polish press as brave fighters for independence, who dared to stand up against the world empire to defend their rights while Great Britain was attributed full responsibility for the outbreak of the war. For many Poles the Boers personified the general idea of freedom fighters and symbolized all suppressed nations. Their sad fate seemed to be quite similar to the Polish one and this similarity was the main source of sympathy toward defenders of the Transvaal and Free Orange State. Voices of few Polish intellectuals, who called for a more objective and not so emotional view on the war, could not change the pro-Boers stance of the greatest part of Polish public opinion.

Efficacy of polishing kits on the surface roughness and color stability ...

African Journals Online (AJOL)

Objective: Different polishing kits may have different effects on the composite resin surfaces. The aim of this study was to evaluate the surface roughness and color stability of four different composites which was applied different polishing technique. Materials and Methods: Thirty specimens were made for each composite ...

Research status in ultra-precision machining of silicon carbide parts by oxidation-assisted polishing

Directory of Open Access Journals (Sweden)

Xinmin SHEN

2016-10-01

Full Text Available Oxidation-assisted polishing is an important machining method for obtaining SiC parts with high precision. Through plasma oxidation, thermal oxidation, and anodic oxidation, soft oxide can be obtained on the RS-SiC substrate. With the assistance of abrasive polishing to remove the oxide rapidly, the material removal rate can be increased and the surface quality can be improved. The research results indicate that the surface roughness root-mean-square (RMS and roughness-average (Ra can reach 0.626 nm and 0.480 nm by plasma oxidation-assisted polishing; in thermal oxidation-assisted polishing, the RMS and Ra can be 0.920 nm and 0.726 nm; in anodic oxidation, the calculated oxidation rate is 5.3 nm/s based on Deal-Grove model, and the RMS and Ra are 4.428 nm and 3.453 nm respectively in anodic oxidation-assisted polishing. The oxidation-assisted polishing can be propitious to improve the process level in machining RS-SiC, which would promote the application of SiC parts in optics and ceramics fields.

Summary of Synthetic Lap Polishing Experiments at LLNL, FY95

International Nuclear Information System (INIS)

Nichols, M A

2001-01-01

The purpose of this research was to support the optics finishing development work for the NIF, the National Ignition Facility. One of the major expenses for the construction of NIF is the cost of finishing of the large aperture optics. One way to significantly reduce the cost of the project is to develop processes to reduce the amount of time necessary to polish the more than 3,000 amplifier slabs. These slabs are rectangular with an aspect ratio of more than twenty to one and are made of a very temperature sensitive glass, Nd doped phosphate laser glass. As a result of this effort, we could potentially reduce the time necessary to polish each surface of an amplifier from 20-30 hours of run time to under an hour to achieve the same removal and still maintain a flatness of between one to three waves concave figure. We also feel confident that we can polish rectangular thermally sensitive glass flat by use of temperature control of the polishing platen, pad curvature, slurry concentration with temperature control, pad rotation, and pressure; although further, larger scale experiments are necessary to gain sufficient confidence that such a procedure could be successfully fielded

New surface modification method of bio-titanium alloy by EB polishing

International Nuclear Information System (INIS)

Okada, Akira; Uno, Yoshiyuki; Iio, Atsuo; Fujiwara, Kunihiko; Doi, Kenji

2008-01-01

A new surface modification for bio-titanium alloy products by electron beam (EB) polishing is proposed. In this EB polishing method, high energy density EB can be irradiated without concentrating the beam. Therefore, large-area EB with a maximum diameter of 60 mm can be used for instantaneously melting or evaporating metal surface. Experimental results made it clear that surface characteristics, such as repellency, corrosion resistance and coefficient of friction could be improved simultaneously with the surface smoothing in a few minutes under a proper condition. Therefore, EB polishing method has a possibility of high efficient surface smoothing and surface modification process for bio-titanium alloy. (author)

Family Enterprises in Polish Consumers' Mindset in the Light of International Tendencies

Directory of Open Access Journals (Sweden)

Joanna Bednarz

2017-07-01

Full Text Available Aim/purpose - The main aim of the paper is to fill in the gap in the existing literature as well as to propose a set of specific family enterprises' (FE attributes concerning certain socioeconomic conditions in Poland. The objectives of the article are interrelated with two theses. H1 assumes that in current literature there is a little attention paid to the demand side of the market, particularly to the individual consumers (including young buyers and their attitudes toward FEs. H2 indicates that the perception of Polish FEs changes considerably reflecting the international trends. Design/methodology/approach - The authors studied a consolidated profound review of recent international and Polish publications on FEs. The expert interviews and in-depth individual interviews were conducted. Both empirical studies brought a preliminary insight into overall consumer perception of the FEs in Poland. Findings - For several years Polish buyers have been dynamically changing their mindset, breaking the stereotype of FEs' owners. Nowadays, tradition and quality are two attributes which are associated closely with Polish FEs. Customers indicate that FEs are trustworthy, responsible, solid and dependable. They also highlight the ethnocentric attitude toward these companies - Polishness. All these attributes are evidently appreciated. FEs are correlated with traditional industries and products, especially with groceries, cosmetics, clothes, shoes, jewelry, furniture, windows and doors. Research implications/limitations - The identity of FEs is not always communicated properly. Consumers often cannot ascertain a provenance of their offer as many FEs do not emphasize their family identity. Additionally, on the Polish market, consumers are occasionally misled considering the family ownership of a business. Originality/value/contribution - The studies indicate a set of attributes typical of Polish FEs underpinning their strong identity which should be

Polishers around the globe: an overview on the market of large astronomical mirrors

Science.gov (United States)

Döhring, Thorsten

2014-07-01

Astronomical mirrors are key elements in modern optical telescopes, their dimensions are usually large and their specifications are demanding. Only a limited number of skilled companies respectively institutions around the world are able to master the challenge to polish an individual astronomical mirror, especially in dimensions above one meter. This paper presents an overview on the corresponding market including a listing of polishers around the globe. Therefore valuable information is provided to the astronomical community: Polishers may use the information as a global competitor database, astronomers and project managers may get more transparency on potential suppliers, and suppliers of polishing equipment may learn about unknown potential customers in other parts of the world. An evaluation of the historical market demand on large monolithic astronomical mirrors is presented. It concluded that this is still a niche market with a typical mean rate of 1-2 mirrors per year. Polishing of such mirrors is an enabling technology with impact on the development of technical know-how, public relation, visibility and reputation of the supplier. Within a corresponding technical discussion different polishing technologies are described. In addition it is demonstrated that strategic aspects and political considerations are influencing the selection of the optical finisher.

Study on combined polishing process of aspherical aluminum mirrors

Science.gov (United States)

Deng, Jinqiu; Peng, Xiaoqiang; Hu, Hao; Ge, Kunpeng

2017-10-01

The aluminum mirrors are widely used as important optical components in some vital fields such as astronomical instruments or military installations due to the unique advantages of aluminum alloy. In order to simplify the structure of optical system and improve the performance at the same time, it's a tendency that the optics will be designed to aspherical or other freeform shapes. However, the traditional techniques are falling to have adequate abilities to deal with the increasing demands of aluminum optics. For example, the tool marks leaved on the surface from single point diamond turning (SPDT) has obvious adverse effects to optical system. The deterministic and sub-aperture polishing process has showed the potential to fabricate complex shapes over the few years. But it's still recognized as a problem to polish bare aluminum directly because of its soft surface and active chemical characteristics. Therefore, a combination of magnetorheological finishing (MRF) and small tool polishing (STP) is applied to obtain high performance aluminum optics in this paper. A paraboloid aluminum mirror was polished with this proposed method, and the results showed that the surface texture of the sample is restrained from rms 0.409λ (λ=632.8nm) to rms 0.025λ, and the surface roughness is improved from average Ra 6 7nm to Ra 3 4nm.

Heavy Metal Contamination of Popular Nail Polishes in Iran

Directory of Open Access Journals (Sweden)

Golnaz Karimi

2015-06-01

Full Text Available Background: Toxic and hazardous heavy metals like arsenic, lead, mercury, zinc, chromium and iron are found in a variety of personal care products, e.g. lipstick, whitening toothpaste, eyeliner and nail color. The nails absorb the pigments of nail polishes and vaporized or soluble metals can easily pass it. The goal of this survey was to assess whether the different colors of nail polishes comply with maximum concentrations of heavy metals in the EPA’s guidelines. Methods: 150 samples of different popular brands of nail polishes in 13 colors (yellow, beige, silver, pink, white, violet, brown, golden, green, black, colorless, red and blue were randomly purchased from beauty shops in Tehran City, Iran, in 2014. Microwave digestion EPA method 3051 was used by a microwave oven to determine the amount of 5 heavy metals; Nickel, Chromium, Lead, Arsenic and Cadmium. One-way ANOVA, Two-way ANOVA, hierarchical cluster, and principal component analyses were applied by Statistica 7.0 software. Results: The concentrations of chrome, lead, nickel and arsenic showed significant differences between the colors (p<0.05. In all studied samples, the level of cadmium was beyond the safe maximum permissible limit (MPS, but no significance difference in the cadmium content was identified. Conclusion: Due to the high concentrations of toxic metals in many brands of nail polishes, meticulous quality control is recommended for these beauty products.

Holocaust Education in Polish Public Schools: Between Remembrance and Civic Education

Science.gov (United States)

Milerski, Boguslaw

2010-01-01

This article analyzes the historical and political context of Holocaust education, and its implementation in Polish schools. Perceptions of the Holocaust continue to change, influenced by Poland's social and political situation. The Polish historical context is quite specific; it includes the long history of Poles and Jews as neighbors, with local…

Polish Standard of the Technical Safety of Transmission Gas Pipelines

International Nuclear Information System (INIS)

Tkacz, A.J.

2006-01-01

The document is presenting the idea of the CNGI Norm called The Polish Standard of the Technical Safety of Transmission Gas Pipelines and the way of using it by companies associated in the Chamber of the Natural Gas Industry in the business activity. It will be applied to improve the quality and reliability of gas transmission after full opening of Polish natural gas market. (author)

Reusing Ceramic Tile Polishing Waste In Paving Block Manufacturing

OpenAIRE

Giordano Penteado; Carmenlucia Santos; de Carvalho; Eduardo Viviani; Cecche Lintz; Rosa Cristina

2016-01-01

Ceramic companies worldwide produce large amounts of polishing tile waste, which are piled up in the open air or disposed of in landfills. These wastes have such characteristics that make them potential substitutes for cement and sand in the manufacturing of concrete products. This paper investigates the use of ceramic tile polishing waste as a partial substitute for cement and sand in the manufacturer of concrete paving blocks. A concrete mix design was defined and then the sand was replaced...

IDENTITY AND NEGOTIATION OF BOUNDARIES AMONG YOUNG POLISH JEWS

OpenAIRE

Cukras-Stelągowska, Joanna

2015-01-01

In this chapter, I would like to look at the processes of building the cultural identity of the young generation of Polish Jews, primarily including the models of constructing modern identifications with the Polish society, the Jewish people and the State of Israel. I will present the results of my own studies, and of those conducted by a few other young researchers dealing with these issues. My main theoretical sources are within the interpretive paradigm. The research methodology was based ...

Research on Grinding and Polishing Force Control of Compliant Flange

Directory of Open Access Journals (Sweden)

Li Chuang

2015-01-01

Full Text Available The automation of the grinding and polishing process is important to improve the production efficiency of the part surfaces. In this paper, a new compliant flange mounted on the end of the industrial robots for the robotic grinding and polishing force control is developed. With regard to the non-linear and time-varying problem of the contact force, the mathematical model of the new force control system was presented and the fuzzy PID control strategy was used to drive the proposed system. Especially, the air spring and electric proportional valve is studied to establish the model. The simulation results show that the selected control strategy has quick response and good robustness, which satisfies the real-time requirements of the grinding and polishing force control in processing.

Materials of 47. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry. Volume 3

International Nuclear Information System (INIS)

2004-01-01

Scientific assemblies of Polish Chemical Society are the most important chemical meeting organised annually in Poland. Basic as well as application studies in all chemical branches have been extensively presented. The next subjects was proposed as scientific sessions and symposia topics: organic chemistry, inorganic chemistry, physical chemistry, analytical chemistry, technology and chemical engineering, polymer chemistry, solid state chemistry, catalysis, biological chemistry, chemistry and technology of coal, environmental protection, didactics of chemistry, history of chemistry, young scientist forum

Cleansing orthodontic brackets with air-powder polishing: effects on frictional force and degree of debris.

Science.gov (United States)

Leite, Brisa Dos Santos; Fagundes, Nathalia Carolina Fernandes; Aragón, Mônica Lídia Castro; Dias, Carmen Gilda Barroso Tavares; Normando, David

2016-01-01

Debris buildup on the bracket-wire interface can influence friction. Cleansing brackets with air-powder polishing can affect this process. The aim of this study was to evaluate the frictional force and amount of debris remaining on orthodontic brackets subjected to prophylaxis with air-powder polishing. Frictional force and debris buildup on the surface of 28 premolar brackets were evaluated after orthodontic treatment. In one hemiarch, each bracket was subjected to air-powder polishing (n = 14) for five seconds, while the contralateral hemiarch (n = 14) served as control. Mechanical friction tests were performed and images of the polished bracket surfaces and control surfaces were examined. Wilcoxon test was applied for comparative analysis between hemiarches at p Brackets that had been cleaned with air-powder polishing showed lower friction (median = 1.27 N) when compared to the control surfaces (median = 4.52 N) (p orthodontic brackets with air-powder polishing significantly reduces debris buildup on the bracket surface while decreasing friction levels observed during sliding mechanics.

Research on Laser Micro Polishing of SLS Technology Sintered Iron-Based Powder Surface

OpenAIRE

Gerda Vaitkūnaitė; Vladislav Markovič; Olegas Černašėjus

2015-01-01

The article analyzes laser micro polishing of 1.2083 steel samples produced applying selective laser sintering (SLS) method. The study has evaluated the distribution of the shape, size and temperature of the laser beam treated area in the surface layer of sintered and laser polished samples. Experimental tests have shown the impact of the technical parameters of laser micro polishing on the width and hardness of the impact zone of the treated sample. The microstructure analysis of laser treat...

Polish credit institutions within the European Union: a cross-country survey

Directory of Open Access Journals (Sweden)

Mariusz Dybał

2011-06-01

Full Text Available The paper presents an analysis of the Polish financial system, with regard to both the number of financial institutions and their assets over the last two decades. Data on the structure of household assets are also presented. According to the study, banks are the most important institutions in the Polish financial system. Analyzed in order to compare Polish credit institutions with all other members of the European Union were total assets of credit institutions, assets of the 25 largest banks in the European Union, as well as in Central and East Europe, share of the five largest credit institutions in total assets (CR5, asset share of credit institutions with majority foreign equity ownership, number of credit institutions, number of local units (branches, number of residents per credit institution local unit, number of employees of credit institutions, assets of credit institutions per employee and GDP per capita in PPS. The data demonstrate that over the past decade Polish credit institutions have largely strengthened their position within the European Union.

The Factor Structure of the Polish-Language Version of the Romantic Beliefs Scale

Directory of Open Access Journals (Sweden)

Katarzyna Adamczyk

2014-07-01

Full Text Available The aim of the present study was to investigate the factor structure and psychometric properties of the Polish adaptation of Romantic Beliefs Scale (RBS; Sprecher & Metts, 1989. In a sample of 414 Polish university students aged 19-25 (227 females and 187 males, the factor structure of the original English version was confirmed for the four subscales: Love Finds a Way, One and Only, Idealization, and Love at First Sight. The present study provides evidence that the 15-item version of the Polish adaptation of the (RBS possesses a factor structure and psychometric properties comparable to the English-language version of RBS. It was shown to be a reliable self-report measure for romantic beliefs within a sample of the Polish population. The development of a new Polish measure of romantic beliefs has provided further validation for the RBS, and provided evidence in support of the ideology of romanticism in various populations, and indicated the importance of differentiating between the different types of romantic beliefs.

[Comparison of surface roughness of nanofilled and microhybrid composite resins after curing and polishing].

Science.gov (United States)

Jiang, Hong; Lv, Da; Liu, Kailei; Zhang, Weisheng; Yao, Yao; Liao, Chuhong

2014-05-01

To compare the surface roughness of nanofilled dental composite resin and microhybrid composite resins after curing and polishing. A nanofilled composite (Z350) and 4 microhybrid composites (P60, Z250, Spectrum, and AP-X) were fabricated from the lateral to the medial layers to prepare 8 mm×8 mm×5 mm cubical specimens. The 4 lateral surfaces of each specimens were polished with abrasive disks (Super-Snap). Profilometer was used to test the mean surface roughness (Ra) after polishing. P60 had the lowest Ra (0.125∓0.030 µm) followed by Z250 and Spectrum. The Ra of Z350 (0.205∓0.052 µm) was greater than that of the other 3 resins, and AP-X had the roughest surfaces. Under scanning electron microscope, the polished faces of P60 resin were characterized by minor, evenly distributed particles with fewer scratches; the polished faces of Z350 presented with scratches where defects of the filling material could be seen. The nanofilled composite Z350 has smooth surface after polishing by abrasive disks, but its smoothness remains inferior to that of other micro-hybrid composite resins.

Physiology and Endocrinology Symposium: The current status of heat shock in early embryonic survival and reproductive efficiency

Science.gov (United States)

The Physiology and Endocrinology Symposium entitled “The Current Status of Heat Shock in Early Embryonic Survival and Reproductive Efficiency” was held at the Joint ADSA-CSAS-AMPA-WSAS-ASAS Meeting in Phoenix, Arizona, July 15 to 19, 2012. In recent years, data has accumulated suggesting a role for...

SELECTION OF ENDOCRINOLOGY SUBSPECIALTY TRAINEES: WHICH APPLICANT CHARACTERISTICS ARE ASSOCIATED WITH PERFORMANCE DURING FELLOWSHIP TRAINING?

Science.gov (United States)

Natt, Neena; Chang, Alice Y; Berbari, Elie F; Kennel, Kurt A; Kearns, Ann E

2016-01-01

To determine which residency characteristics are associated with performance during endocrinology fellowship training as measured by competency-based faculty evaluation scores and faculty global ratings of trainee performance. We performed a retrospective review of interview applications from endocrinology fellows who graduated from a single academic institution between 2006 and 2013. Performance measures included competency-based faculty evaluation scores and faculty global ratings. The association between applicant characteristics and measures of performance during fellowship was examined by linear regression. The presence of a laudatory comparative statement in the residency program director's letter of recommendation (LoR) or experience as a chief resident was significantly associated with competency-based faculty evaluation scores (β = 0.22, P = .001; and β = 0.24, P = .009, respectively) and faculty global ratings (β = 0.85, P = .006; and β = 0.96, P = .015, respectively). The presence of a laudatory comparative statement in the residency program director's LoR or experience as a chief resident were significantly associated with overall performance during subspecialty fellowship training. Future studies are needed in other cohorts to determine the broader implications of these findings in the application and selection process.

Laser polishing for topography management of accelerator cavity surfaces

Energy Technology Data Exchange (ETDEWEB)

Zhao, Liang [College of William and Mary, Williamsburg, VA (United States); Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Klopf, J. Mike [College of William and Mary, Williamsburg, VA (United States); Reece, Charles E. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Kelley, Michael J. [College of William and Mary, Williamsburg, VA (United States); Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

2015-07-20

Improved energy efficiency and reduced cost are greatly desired for advanced particle accelerators. Progress toward both can be made by atomically-smoothing the interior surface of the niobium superconducting radiofrequency accelerator cavities at the machine's heart. Laser polishing offers a green alternative to the present aggressive chemical processes. We found parameters suitable for polishing niobium in all surface states expected for cavity production. As a result, careful measurement of the resulting surface chemistry revealed a modest thinning of the surface oxide layer, but no contamination.

Surface roughness and morphology of dental nanocomposites polished by four different procedures evaluated by a multifractal approach

Energy Technology Data Exchange (ETDEWEB)

Ţălu, Ştefan, E-mail: stefan_ta@yahoo.com [Technical University of Cluj-Napoca, Faculty of Mechanical Engineering, Department of AET, Discipline of Descriptive Geometry and Engineering Graphics, 103-105 B-dul Muncii St., Cluj-Napoca 400641, Cluj (Romania); Stach, Sebastian, E-mail: sebastian.stach@us.edu.pl [University of Silesia, Faculty of Computer Science and Materials Science, Institute of Informatics, Department of Biomedical Computer Systems, Będzińska 39, 41-205 Sosnowiec (Poland); Lainović, Tijana, E-mail: tijana.lainovic@gmail.com [University of Novi Sad, Faculty of Medicine, School of Dentistry, Hajduk Veljkova 3, 21000 Novi Sad (Serbia); Vilotić, Marko, E-mail: markovil@uns.ac.rs [University of Novi Sad, Faculty of Technical Sciences, Department for Production Engineering, Trg Dositeja Obradovića 6, 21000 Novi Sad (Serbia); Blažić, Larisa, E-mail: larisa.blazic@gmail.com [University of Novi Sad, Faculty of Medicine, School of Dentistry, Clinic of Dentistry of Vojvodina, Department of Restorative Dentistry and Endodontics, Hajduk Veljkova 3, 21000 Novi Sad (Serbia); Alb, Sandu Florin, E-mail: albflorin@yahoo.com [“Iuliu Haţieganu” University of Medicine and Pharmacy, Faculty of Dentistry, Department of Periodontology, 8 Victor Babeş St., 400012 Cluj-Napoca (Romania); Kakaš, Damir, E-mail: kakasdam@uns.ac.rs [University of Novi Sad, Faculty of Technical Sciences, Department for Production Engineering, Trg Dositeja Obradovića 6, 21000 Novi Sad (Serbia)

2015-03-01

Graphical abstract: - Highlights: • Multifractals are good indicators of polished dental composites 3-D surface structure. • The nanofilled composite had superior 3-D surface properties than the nanohybrid one. • Composite polishing with diamond paste created improved 3-D multifractal structure. • Recommendation: polish the composite with diamond paste if using the one-step tool. • Multifractal analysis could become essential in designing new dental surfaces. - Abstract: The objective of this study was to determine the effect of different dental polishing methods on surface texture parameters of dental nanocomposites. The 3-D surface morphology was investigated by atomic force microscopy (AFM) and multifractal analysis. Two representative dental resin-based nanocomposites were investigated: a nanofilled and a nanohybrid composite. The samples were polished by two dental polishing protocols using multi-step and one-step system. Both protocols were then followed by diamond paste polishing. The 3-D surface roughness of samples was studied by AFM on square areas of topography on the 80 × 80 μm{sup 2} scanning area. The multifractal spectrum theory based on computational algorithms was applied for AFM data and multifractal spectra were calculated. The generalized dimension D{sub q} and the singularity spectrum f(α) provided quantitative values that characterize the local scale properties of dental nanocomposites polished by four different dental polishing protocols at nanometer scale. The results showed that the larger the spectrum width Δα (Δα = α{sub max} − α{sub min}) of the multifractal spectra f(α), the more non-uniform was the surface morphology. Also, the 3-D surface topography was described by statistical parameters, according to ISO 25178-2:2012. The 3-D surface of samples had a multifractal nature. Nanofilled composite had lower values of height parameters than nanohybrid composites, due to its composition. Multi-step polishing protocol

Surface roughness and morphology of dental nanocomposites polished by four different procedures evaluated by a multifractal approach

International Nuclear Information System (INIS)

Ţălu, Ştefan; Stach, Sebastian; Lainović, Tijana; Vilotić, Marko; Blažić, Larisa; Alb, Sandu Florin; Kakaš, Damir

2015-01-01

Graphical abstract: - Highlights: • Multifractals are good indicators of polished dental composites 3-D surface structure. • The nanofilled composite had superior 3-D surface properties than the nanohybrid one. • Composite polishing with diamond paste created improved 3-D multifractal structure. • Recommendation: polish the composite with diamond paste if using the one-step tool. • Multifractal analysis could become essential in designing new dental surfaces. - Abstract: The objective of this study was to determine the effect of different dental polishing methods on surface texture parameters of dental nanocomposites. The 3-D surface morphology was investigated by atomic force microscopy (AFM) and multifractal analysis. Two representative dental resin-based nanocomposites were investigated: a nanofilled and a nanohybrid composite. The samples were polished by two dental polishing protocols using multi-step and one-step system. Both protocols were then followed by diamond paste polishing. The 3-D surface roughness of samples was studied by AFM on square areas of topography on the 80 × 80 μm 2 scanning area. The multifractal spectrum theory based on computational algorithms was applied for AFM data and multifractal spectra were calculated. The generalized dimension D q and the singularity spectrum f(α) provided quantitative values that characterize the local scale properties of dental nanocomposites polished by four different dental polishing protocols at nanometer scale. The results showed that the larger the spectrum width Δα (Δα = α max − α min ) of the multifractal spectra f(α), the more non-uniform was the surface morphology. Also, the 3-D surface topography was described by statistical parameters, according to ISO 25178-2:2012. The 3-D surface of samples had a multifractal nature. Nanofilled composite had lower values of height parameters than nanohybrid composites, due to its composition. Multi-step polishing protocol created a better

Original article Validation of the Polish version of the Collective Self-Esteem Scale

Directory of Open Access Journals (Sweden)

Róża Bazińska

2015-07-01

Full Text Available Background The aim of this article is to present research on the validity and reliability of the Collective Self-Esteem Scale (CSES for the Polish population. The CSES is a measure of individual differences in collective self-esteem, understood as the global evaluation of one’s own social (collective identity. Participants and procedure Participants from two samples (n = 466 and n = 1,009 completed a paper-pencil set of questionnaires which contained the CSES and the Rosenberg Self-Esteem Scale (RSES, and subsets of participants completed scales related to a sense of belonging, well-being and psychological distress (anxiety and depression. Results Like the original version, the Polish version of the CSES comprises 16 items which form the four dimensions of collective self-esteem: Public collective self-esteem, Private collective self-esteem, Membership esteem and Importance of Identity. The results confirm the four-factor structure of the Polish version of the CSES, support the whole Polish version of the CSES as well as its subscales, which represent satisfactory reliability and stability, and provide initial evidence of construct validity. Conclusions As the results of the study indicate, the Polish version of the CSES is a valid and reliable self-report measure for assessing the global self-esteem derived from membership of a group and has proved to be useful in the Polish context.

Development of on the machine process monitoring and control strategy in Robot Assisted Polishing

DEFF Research Database (Denmark)

Pilny, Lukas; Bissacco, Giuliano

2015-01-01

Robot Assisted Polishing (RAP) can be used to polish rotational symmetric and free form components achieving surface roughness down to Sa 10 nm. With the aim to enable unmanned robust and cost efficient application of RAP, this paper presents the development of a monitoring and control strategy....... The multisensory approach was experimentally validated in polishing with bonded abrasives demonstrating its suitability for process control in RAP....

The prevalence of burnout syndrome in Polish anaesthesiologists.

Science.gov (United States)

Misiołek, Aleksandra; Gorczyca, Piotr; Misiołek, Hanna; Gierlotka, Zbigniew

2014-01-01

Burnout syndrome is a psychological response to chronic work-related stress characterized by low enthusiasm towards the job, high psychological exhaustion, indolence and guilt. Being a medical doctor, both in Poland and in other countries, is one of the most stressful occupations and anaesthesiology is considered one of the most stressful specializations, which justify carrying out of the study on Polish anaesthesiologists. The aim of the study was to determine the prevalence of burnout syndrome in Polish anaesthesiologists Non-randomized cross-sectional study was carried out and data were gathered through a self-administrated questionnaire. The sample consisted of 373 Polish anaesthesiologists, 57.6% were women and 42.4% were men. A 66% response rate was achieved. The Burnout Syndrome was measured by the Spanish Burnout Inventory. The prevalence burnout risk was almost 70%. The percentage of participants who indicated very high levels of burnout was 18%; 5.9% of whom fell into profile 2 considered to be clinical. The instrument applied was reliable with Cronbach's alphas exceeding 0.70. The sample is characterized by high burnout risk with 5.9% of clinical cases. Participation in prevention programs is recommended.

Study of Pneumatic Servo Loading System in Double-Sided Polishing

International Nuclear Information System (INIS)

Qian, N; Ruan, J; Li, W

2006-01-01

The precise double-sided polishing process is one of the main methods to get the ultra-smooth surface of workpiece. In double-sided polishing machine, a loading system is required to be able to precisely control the load superimposed on the workpiece, while the polishing is being carried out. A pneumatic servo loading system is proposed for this purpose. In the pneumatic servo system, the servo valve, which acts both the electrical to mechanical converter and the power amplifier, has a substantial influence on the performance of the loading system. Therefore a specially designed pneumatic digital servo valve is applied in the control system. In this paper, the construction of the pneumatic servo loading system in double-sided polishing machine and control strategy associated with the digital servo valve are first addressed. The mathematical model of the system established and the hardware of the pneumatic servo system is designed. Finally, the experiments are carried out by measuring the practical load on the workpiece and the quality of the surface finish. It is demonstrated that the error rate of load is less than 5% and a super-smooth surface of silicon wafer with roughness Ra 0.401 nm can be obtained

Ernest Henry Starling: the history of cardiovascular endocrinology and the continuous need for developing animal models

DEFF Research Database (Denmark)

Henriksen, Jens Henrik Sahl

2014-01-01

The English physiologist, Ernest Henry Starling (1866–1927) (Fig. 1) in 1896, provided a quantitative explanation of the transcapillary transport of fluid. Six years later, he discovered the first hormone and introduced the concept of hormones in 1905, and at the time of the First World War, he f......’s achievements in cardiovascular physiology and endocrinology....

Tribochemical interaction between nanoparticles and surfaces of selective layer during chemical mechanical polishing

International Nuclear Information System (INIS)

Ilie, Filip

2013-01-01

Nanoparticles have been widely used in polish slurries such as those in the chemical mechanical polishing (CMP) process. For understanding the mechanisms of CMP, an atomic force microscope (AFM) is used to characterize polished surfaces of selective layers, after a set of polishing experiments. To optimize the CMP polishing process, one needs to get information on the interaction between the nano-abrasive slurry nanoparticles and the surface of selective layer being polished. The slurry used in CMP process of the solid surfaces is slurry with large nanoparticle size colloidal silica sol nano-abrasives. Silica sol nano-abrasives with large nanoparticle are prepared and characterized by transmission electron microscopy, particles colloidal size, and Zeta potential in this paper. The movement of nanoparticles in liquid and the interaction between nanoparticles and solid surfaces coating with selective layer are very important to obtain an atomic alloy smooth surface in the CMP process. We investigate the nanoparticle adhesion and removal processes during CMP and post-CMP cleaning. The mechanical interaction between nanoparticles and the wafer surface was studied using a microcontact wear model. This model considers the nanoparticle effects between the polishing interfaces during load balancing. Experimental results on polishing and cleaning are compared with numerical analysis. This paper suggests that during post-CMP cleaning, a combined effort in chemical and mechanical interaction (tribochemical interactions) would be effective in removal of small nanoparticles during cleaning. For large nanoparticles, more mechanical forces would be more effective. CMP results show that the removal rate has been improved to 367 nm/min and root mean square (RMS) of roughness has been reduced from 4.4 to 0.80 nm. Also, the results show that the silica sol nano-abrasives about 100 nm are of higher stability (Zeta potential is −65 mV) and narrow distribution of nanoparticle

Barriers and Limitations of Mentoring in Polish Organizations

Directory of Open Access Journals (Sweden)

Joanna Mesjasz

2013-09-01

Full Text Available In Polish organizations one can recognize a lot of barriers in the mentoring implementation. According to the author, at the root of these barriers are hierarchies of values: social, national, organizational, and hierarchies of values represented by individual employees. The purpose of this article is to trace the sources of constraints in the mentoring implementation process. The analysis is carried out on several levels: from the broadest social perspective, through the national to the perspective of the organization. In the article, there are also presented actions that should be taken by Polish organizations to overcome barriers and constraints in the mentoring implementation process.

Process optimization for ultrasonic vibration assisted polishing of micro-structured surfaces on super hard material

Science.gov (United States)

Sun, Zhiyuan; Guo, Bing; Rao, Zhimin; Zhao, Qingliang

2014-08-01

In consideration of the excellent property of SiC, the ground micro-structured surface quality is hard to meet the requirement - consequently the ultrasonic vibration assisted polishing (UVAP) of micro-structures of molds is proposed in this paper. Through the orthogonal experiment, the parameters of UVAP of micro-structures were optimized. The experimental results show that, abrasive polishing process, the effect of the workpiece feed rate on the surface roughness (Ra), groove tip radius (R) and material removal rate (MRR) of micro-structures is significant. While, the UVAP, the most significant effect factor for Ra, R and MRR is the ultrasonic amplitude of the ultrasonic vibration. In addition, within the scope of the polishing process parameters selected by preliminary experiments, ultrasonic amplitude of 2.5μm, polishing force of 0.5N, workpiece feed rate of 5 mm·min-1, polishing wheel rotational speed of 50rpm, polishing time of 35min, abrasive size of 100nm and the polishing liquid concentration of 15% is the best technology of UVAP of micro-structures. Under the optimal parameters, the ground traces on the micro-structured surface were removed efficiently and the integrity of the edges of the micro-structure after grinding was maintained efficiently.

The effect of different polishing systems on surface roughness and gloss of various resin composites.

Science.gov (United States)

Da Costa, Juliana; Ferracane, Jack; Paravina, Rade D; Mazur, Rui Fernando; Roeder, Leslie

2007-01-01

The purpose of this in vitro study was to evaluate the surface finish and gloss of five direct resin composites polished with six polishing systems. One hundred and fifty disk-shaped composite specimens (D=10.0 mm, 2-mm-thick, N=30 per material) were made. One side of each specimen was finished with a 16-fluted carbide finishing bur and then polished. Five specimens of each resin composite were randomly assigned to one of the six polishing systems. The surface roughness and gloss were measured with a surface profilometer and a glossmeter. The results were analyzed by two-way analysis of variance and Tukey's t-test (pgloss values between the composites and the polishing systems (p gloss value was recorded for Supreme + Pogo; the lowest was recorded for Z100 + Jiffy. Pogo showed the highest gloss values for all composites. The nanofill (Supreme) and minifill (Esthet-X) composites presented a surface roughness comparable to a microfill (Durafill), independent of the polishing system used, and a gloss comparable to a microfill, when polished with a one-step system (Pogo). As compared with the multiple-step systems, the smoothest surfaces and the highest gloss values were achieved using the one-step system (Pogo) for all the evaluated composites.

Surface roughness of novel resin composites polished with one-step systems.

Science.gov (United States)

Ergücü, Z; Türkün, L S

2007-01-01

This study: 1) analyzed the surface roughness of five novel resin composites that contain nanoparticles after polishing with three different one-step systems and 2) evaluated the effectiveness of these polishers and their possible surface damage using scanning electron microscope (SEM) analysis. The resin composites evaluated in this study include CeramX, Filtek Supreme XT, Grandio, Premise and Tetric EvoCeram. A total of 100 discs (20/resin composites, 10 x 2 mm) were fabricated. Five specimens/resin composites cured under Mylar strips served as the control. The samples were polished for 30 seconds with PoGo, OptraPol and One Gloss discs at 15,000 rpm using a slow speed handpiece. The surfaces were tested for roughness (Ra) with a surface roughness tester and examined with SEM. One-way ANOVA was used for statistical analysis (p = 0.05). For all the composites tested, differences between the polishing systems were found to be significant (p One Gloss applications. For Grandio, Mylar and PoGo created equally smooth surfaces, while OptraPol and One Gloss produced equally rougher surfaces. Tetric EvoCeram exhibited the roughest surface with OptraPol, while no significant differences were found between Premise and CeramX. According to SEM images, OptraPol and One Gloss scratched and plucked the particles away from the surface, while PoGo created a uniform finish, although the roughness values were not the same for each composite. Effectiveness of the polishers seems to be material dependent.

Numerical Simulation Analysis of Five-Step Variable-Diameter Pipe with Solid-Liquid Two-Phase Abrasive Flow Polishing

Science.gov (United States)

Li, Junye; Zhang, Hengfu; Wu, Guiling; Hu, Jinglei; Liu, Yang; Sun, Zhihui

2018-01-01

In many areas of precision machining abrasive flow polishing technology has an important role. In order to study the influence of abrasive flow on the polishing effect of variable diameter parts, the fifth step variable diameter tube was taken as the research object to analyze the dynamic pressure and turbulent kinetic energy distribution of inlet velocity on the fifth-order variable diameter tube influences. Through comparative analysis, the abrasive flow polished variable diameter pipe parts have very effective and significant polishing effect and the higher the inlet speed, the more significant the polishing effect.

Frequency and clinical and molecular aspects of familial hypercholesterolemia in an endocrinology unit in Ciudad Bolívar, Venezuela.

Science.gov (United States)

Lima-Martínez, Marcos M; Paoli, Mariela; Vázquez-Cárdenas, Alejandra; Magaña-Torres, María Teresa; Guevara, Ornella; Muñoz, María Carolina; Parrilla-Alvarez, Alberto; Márquez, Yuliangelys; Medeiros, Ana; Bourbon, Mafalda

2017-10-01

To assess the frequency and the clinical, biochemical, and molecular aspects of familial hypercholesterolemia (FH) in subjects attending an endocrinology unit. An observational, descriptive study evaluating 3,140 subjects attending the endocrinology unit of Centro Médico Orinoco in Ciudad Bolívar, Venezuela, from 7 January 2013 to 9 December 2016. The index cases were selected using the Dutch Lipid Clinic Network criteria. Plasma lipid levels were measured, and a molecular analysis was performed by DNA sequencing of the LDLR and APOB genes. Ten (0.32%) of the 3,140 study patients had clinical and biochemical characteristics consistent with FH. All but one were female. Three had first-degree relatives with prior premature coronary artery; and none had a personal history of this condition. Three patients were obese; three had high blood pressure; and no one suffered from diabetes. Three patients had a history of tendon xanthomas, and one of corneal arcus. LDL-C levels ranged from 191 to 486mg/dL. Two patients were on statin therapy. The genetic causes of FH were identified in four patients, and were LDLR gene mutations in three of them and an APOB gene mutation in exon 26 in the other. Approximately, one out of every 300 people attending this endocrinology unit in those four years had FH, and LDLR gene mutations were the most prevalent cause. Copyright © 2017 SEEN. Publicado por Elsevier España, S.L.U. All rights reserved.

Microstructure of pulsed-laser deposited PZT on polished and annealed MGO substrates

NARCIS (Netherlands)

King, S.L.; Coccia, L.G.; Gardeniers, Johannes G.E.; Boyd, I.W.

1996-01-01

Thin films of Lead-Zirconate-Titanate (PZT) have been grown by pulsed-laser-deposition (PLD) onto polished MgO substrates both with and without pre-annealing. The surface morphology of polished MgO substrates, which are widely used for deposition, is examined by AFM. Commercially available,

Development of a multisensory arm for process monitoring in Robot Assisted Polishing

DEFF Research Database (Denmark)

Pilny, Lukas; Dalla Costa, Giuseppe; Bissacco, Giuliano

2015-01-01

A multisensory polishing arm with integrated three component force sensor, a miniature acoustic emission (AE) sensor and an accelerometer was developed for process monitoring in Robot Assisted Polishing (RAP) process. The arm design was optimized for integration of a force and an AE sensor. The f...

Endocrinology of human female sexuality, mating, and reproductive behavior.

Science.gov (United States)

Motta-Mena, Natalie V; Puts, David A

2017-05-01

Hormones orchestrate and coordinate human female sexual development, sexuality, and reproduction in relation to three types of phenotypic changes: life history transitions such as puberty and childbirth, responses to contextual factors such as caloric intake and stress, and cyclical patterns such as the ovulatory cycle. Here, we review the endocrinology underlying women's reproductive phenotypes, including sexual orientation and gender identity, mate preferences, competition for mates, sex drive, and maternal behavior. We highlight distinctive aspects of women's sexuality such as the possession of sexual ornaments, relatively cryptic fertile windows, extended sexual behavior across the ovulatory cycle, and a period of midlife reproductive senescence-and we focus on how hormonal mechanisms were shaped by selection to produce adaptive outcomes. We conclude with suggestions for future research to elucidate how hormonal mechanisms subserve women's reproductive phenotypes. Copyright © 2016 Elsevier Inc. All rights reserved.

Polish normalization of the Body Esteem Scale

Directory of Open Access Journals (Sweden)

Małgorzata Lipowska

2014-02-01

Full Text Available Background Physical attractiveness plays an important part in one’s social functioning. The interest in one’s own appearance have been documented as widespread among the female population, but over the recent years it is more and more often emphasized that concentrating on body appearance concerns men as well. Franzoi and Shields (1984 created the Body Esteem Scale which allows to qualify the subject’s attitude towards his or her own body. The aim of the study was to create a Polish version of the Body Esteem Scale along with the norms for age and sex clusters. Participants and procedure The normalization sample consisted of 4298 participants: 1865 women aged 16 to 80 (M = 29.92; SD = 12.85 and 2433 men aged 16 to 78 (M = 28.74; SD = 11.50. Education levels among the participants were also controlled for. In order to create a Polish version of the Body Esteem Scale, translation was adopted as the adaptation strategy. Like the original one, the Polish scale comprises 35 items grouped into three gender specific subscales. The subscales for women include Sexual Attractiveness, Weight Concern, and Physical Condition, whereas the body esteem of is examined with regards to Physical Attractiveness, Upper Body Strength, and Physical Condition. Results Reliability of subscales was high both for females (Cronbach’s alpha from 0.80 to 0.89 and males (Cronbach’s alpha from 0.85 to 0.88. The given coefficients of reliability cover the original division into subscales adopted by the authors of BES. Conclusions We confirmed high reliability of the Polish version of the Body Esteem Scale, thus we recommend it as a diagnostic tool. Created norms allowed to refer results obtained in the course of research carried out on people with various disorders (e.g. eating disorders or body dysmorphic disorder with population data for corresponding age brackets.

[Józef Heller-one of organizers of Polish biochemistry in 1942-1973].

Science.gov (United States)

Zarebska, Zofia

2011-01-01

The article commemorates the activity of Józef Heller starting in 1921 with Jakub Parnas's group in Lvov which investigated the phosphorolysis of glycogen. The unknown events of His biography were disclosed, like military service in the Piłsudski's Legions at the rebirth of the Polish State and, subsequently, during the Nazi occupation of Poland--participation in the clandestine teaching of medical students. In the post-war times Józef Heller undertook teaching of medical students in Wrocław and next in Warsaw. In 1954 He begun to organize the Institute of Biochemistry and Biophysics of the Polish Academy of Sciences--it now continues its activity. Professor Heller initiated the publication in Poland of three major biochemical journals, including Postepy Biochemii (1954). Thanks to His leadership the first Polish Medical Dictionary was published (1981). The article summarizes the pursuit of Józef Heller in various branches of academic life, which were and still are appreciated by subsequent generations of Polish biochemists.

Surface roughness of zirconia for full-contour crowns after clinically simulated grinding and polishing.

Science.gov (United States)

Hmaidouch, Rim; Müller, Wolf-Dieter; Lauer, Hans-Christoph; Weigl, Paul

2014-12-01

The aim of this study was to evaluate the effect of controlled intraoral grinding and polishing on the roughness of full-contour zirconia compared to classical veneered zirconia. Thirty bar-shaped zirconia specimens were fabricated and divided into two groups (n=15). Fifteen specimens (group 1) were glazed and 15 specimens (group 2) were veneered with feldspathic ceramic and then glazed. Prior to grinding, maximum roughness depth (Rmax) values were measured using a profilometer, 5 times per specimen. Simulated clinical grinding and polishing were performed on the specimens under water coolant for 15 s and 2 N pressure. For grinding, NTI diamonds burs with grain sizes of 20 µm, 10 µm, and 7.5 µm were used sequentially. The ground surfaces were polished using NTI kits with coarse, medium and fine polishers. After each step, Rmax values were determined. Differences between groups were examined using one-way analysis of variance (ANOVA). The roughness of group 1 was significantly lower than that of group 2. The roughness increased significantly after coarse grinding in both groups. The results after glazing were similar to those obtained after fine grinding for non-veneered zirconia. However, fine-ground veneered zirconia had significantly higher roughness than venerred, glazed zirconia. No significant difference was found between fine-polished and glazed zirconia, but after the fine polishing of veneered zirconia, the roughness was significantly higher than after glazing. It can be concluded that for full-contour zirconia, fewer defects and lower roughness values resulted after grinding and polishing compared to veneered zirconia. After polishing zirconia, lower roughness values were achieved compared to glazing; more interesting was that the grinding of glazed zirconia using the NTI three-step system could deliver smooth surfaces comparable to untreated glazed zirconia surfaces.

Effects of finishing/polishing techniques on microleakage of resin-modified glass ilonomer cement restorations.

Science.gov (United States)

Yap, Adrian U J; Yap, W Y; Yeo, Egwin J C; Tan, Jane W S; Ong, Debbie S B

2003-01-01

This study investigated the effect of finishing/polishing techniques on the microleakage of resin-modified glass ionomer restorations. Class V preparations were made on the buccal and lingual/palatal surfaces of freshly extracted teeth. The cavities on each tooth were restored with Fuji II LC (FT [GC]) and Photac-Fil Quick (PF [3M-ESPE]) according to manufacturers' instructions. Immediately after light-polymerization, gross finishing was done with eight-fluted tungsten carbide burs. The teeth were then randomly divided into four groups and finishing/polishing was done with one of the following systems: (a) Robot Carbides (RC); (b) Super-Snap system (SS); (c) OneGloss (OG) and (d) CompoSite Polishers (CS). The sample size for each material-finishing/polishing system combination was eight. After finishing/polishing, the teeth were stored in distilled water at 37 degrees C for one week. The root apices were then sealed with acrylic and two coats of varnish was applied 1 mm beyond the restoration margins. The teeth were subsequently subjected to dye penetration testing (0.5% basic fuchsin), sectioned and scored. Data was analyzed using Kruskal-Wallis and Mann-Whitney U tests at a significance level of 0.05. Results of statistical analysis were as follows: Enamel margins: PF-OGpolishing technique, leakage at dentin margins was significantly greater than at enamel margins for FT. For PF, no significant difference in leakage scores was observed between dentin and enamel with the exception of finishing/polishing with OG. FT restorations had significantly less enamel and dentin leakage than PF restorations when treated with OG. The effect of finishing/polishing techniques on microleakage was both tissue and material dependent.

A new view on dam lines in Polish Arabian horses based on mtDNA analysis

Directory of Open Access Journals (Sweden)

Sell Jerzy

2007-09-01

Full Text Available Abstract Polish Arabian horses are one of the oldest and the most important Arab populations in the world. The Polish Arabian Stud Book and the Genealogical Charts by Skorkowski are the main sources of information on the ancestors of Polish Arabs. Both publications were viewed as credible sources of information until the 1990s when the data regarding one of the dam lines was questioned. The aim of the current study was to check the accuracy of the pedigree data of Polish dam lines using mtDNA analysis. The analyses of a 458 bp mtDNA D-loop fragment from representatives of 15 Polish Arabian dam lines revealed 14 distinct haplotypes. The results were inconsistent with pedigree data in the case of two lines. A detailed analysis of the historical sources was performed to explain these discrepancies. Our study revealed that representatives of different lines shared the same haplotypes. We also noted a genetic identity between some lines founded by Polish mares of unknown origin and lines established by desert-bred mares.

Great Britain and German-Polish Relations, 1929–1931

Directory of Open Access Journals (Sweden)

Zotova Ekaterina

2014-12-01

Full Text Available The article deals with the study of British-German relations during the period of exacerbation of territorial disputes between Germany and Poland in 1929-1931. Germany was making plans for revising the eastern borders. It sought to enlist the support of the new Labour government. Britain didn’t only approve of Germany's intention to carry out revision of the Treaty of Versailles (reparation issue, the evacuation of the Rhineland and the change in the German-Polish border, but also supported the strengthening of the political and economic situation in Germany as a whole. Assistance to Germany was advantageous for Britain. Firstly, the British support helped to improve the capacity of the purchasing power of the German market as one of the traditional markets of the English sale. Secondly, the strengthening of the position of the German cabinet meant failure of the French policy in Europe at this stage. The defeat of France in a dispute on the issue of early evacuation of the Rhineland would seriously devalue the foreign policy initiatives of Paris. Thirdly, the British government hoped that Germany will go into orbit of British political influence. The identity of the positions of the German and the British cabinets were considered as the components of British policy success not only in relations with France and Italy, but also with Czechoslovakia and Poland. Since the formation of the MacDonald’s cabinet, anti-Polish moods increased in the British course for the settlement of German-Polish relations. However, the threat of an attack on Poland by Germany was regarded by the government of Britain as unacceptable way of resolving the German-Polish conflict. Britain tried to follow the traditional foreign policy concept of “balance of power”, but the inefficiency of British policy “mediation” in European affairs was clearly shown in times of growing financial and economic crisis. The issue of the German-Polish border remained unsolved.

E-TOURISM SERVICES IN POLISH TOURISTS' OPINIONS

Directory of Open Access Journals (Sweden)

Joanna Papińska-Kacperek

2013-07-01

Full Text Available E-tourism is most often related only with web pages of travel agencies or aggregators offering many services, where it is possible to make transactions electronically. Whereas many applications and devices are applied in tourism, like the audio guides and mobile guides (sometimes with augmented reality functions, electronic cards in museums, 2D codes systems, web pages for individual tourists, geographic information systems (e.g. Google Street View, social network sites recommendation, and profiles of cities on social networks sites like Facebook. Polish tourists' opinions about mentioned innovative tools will be presented as the report from the survey conducted among students and graduates from three Polish universities. The objectives of the study are: investigating the popularity of e-tourist services in Poland and verifying whether municipal authorities promote e-tourism initiatives.

Chemical polishing of epitoxial silicon wafer

International Nuclear Information System (INIS)

Osada, Shohei

1978-01-01

SSD telescopes are used for the determination of the kind and energy of charged particles produced by nuclear reactions, and are the equipments combining ΔE counters and E counters. The ΔE counter is a thin SSD which is required to be thin and homogeneous enough to get the high resolution of measurement. The SSDs for ΔE counters have so far been obtained by polishing silicon plates mechanically and chemically or by applying electrolytic polishing method on epitaxial silicon wafers, but it was very hard to obtain them. The creative etching equipment and technique developed this time make it possible to obtain thin SSDs for ΔE counters. The outline of the etching equipment and its technique are described in the report. The etching technique applied for the silicon films for ΔE counters with thickness of about 10 μm was able to be experimentally established in this study. (Kobatake, H.)

Strategy of the Polish policy in the final phase of the Second world war

Directory of Open Access Journals (Sweden)

L. P. Shvab

2014-09-01

Full Text Available The problems of strategy formation of the Polish government, which was in emigration, during the Second World War in the period of the eastern front approaching to the Polish borders, are found out in the article. The author confirms that the success of the Red Army made London government to rise a question about the Polish eastern border and legitimacy of London government on the liberated territories. Both questions did not have the solution in the way of traditional Polish policy. Joseph Stalin expected concession in the issue of the eastern border instead of loyalty to the London government. But Polish government did not accept accomplished facts. The ambassadors Stanislav Kot, later Tadeush Romer negotiated and insisted on returning of the western Ukrainian and Byelorussian lands. They proposed military cooperation with the Polish Home Army, which supposed to be strong enough for diversionary acts. After the battle of Stalingrad victory and that resonance, which it had made in the world, Stalin refused from such cooperation, he thought that Poland was too weak partner. Stalin continued the escalation of the relations, he consciously stopped all diplomatic relations, flatly refused to continue discussion about borders and changed the way of discussion about the legitimacy of the authentic authority in Poland.

Effect of prophylactic polishing protocols on the surface roughness of esthetic restorative materials.

Science.gov (United States)

Neme, A L; Frazier, K B; Roeder, L B; Debner, T L

2002-01-01

Many polishing protocols have been evaluated in vitro for their effect on the surface roughness of restorative materials. These results have been useful in establishing protocols for in vivo application. However, limited research has focused on the subsequent care and maintenance of esthetic restorations following their placement. This investigation evaluated the effect of five polishing protocols that could be implemented at recall on the surface roughness of five direct esthetic restorative materials. Specimens (n=25) measuring 8 mm diameter x 3 mm thick were fabricated in an acrylic mold using five light-cured resin-based materials (hybrid composite, microfilled composite, packable composite, compomer and resin-modified glass ionomer). After photopolymerization, all specimens were polished with Sof-Lex Disks to produce an initial (baseline) surface finish. All specimens were then polished with one of five prophylactic protocols (Butler medium paste, Butler coarse paste, OneGloss, SuperBuff or OneGloss & SuperBuff). The average surface roughness of each treated specimen was determined from three measurements with a profilometer (Surface 1). Next, all specimens were brushed 60,000 times at 1.5 Hz using a brush-head force of 2 N on a Manly V-8 cross-brushing machine in a 50:50 (w/w) slurry of toothpaste and water. The surface roughness of each specimen was measured after brushing (Surface 2) followed by re-polishing with one of five protocols, then final surface roughness values were determined (Surface 3). The data were analyzed using repeated measures ANOVA. Significant differences (p=0.05) in surface roughness were observed among restorative materials and polishing protocols. The microfilled and hybrid resin composite yielded significantly rougher surfaces than the other three materials following tooth brushing. Prophylactic polishing protocols can be used to restore a smooth surface on resin-based esthetic restorative materials following simulated tooth

Electroluminescence Analysis by Tilt Polish Technique of InP-Based Semiconductor Lasers

Science.gov (United States)

Ichikawa, Hiroyuki; Sasaki, Kouichi; Hamada, Kotaro; Yamaguchi, Akira

2010-03-01

We developed an effective electroluminescence (EL) analysis method to specify the degraded region of InP-based semiconductor lasers. The EL analysis method is one of the most important methods for failure analysis. However, EL observation was difficult because opaque electrodes surround an active layer. A portion of each electrode had to be left intact for wiring to inject the current. Thus, we developed a partial polish technique for the bottom electrode. Tilt polish equipment with a rotating table was introduced; a flat polished surface and a sufficiently wide remaining portion of the bottom electrode were obtained. As a result, clear EL from the back surface of the laser was observed.

Sword of Christ. Christian inspirations of Polish socialism before the January Uprising

Directory of Open Access Journals (Sweden)

Piotr Kuligowski

2012-06-01

Full Text Available The article presents the history of the Christian fraction of Polish socialism against the background of the era, from the very beginning until its end after the January Uprising. On the basis of the texts from the era the understanding of socialism, the principles of the program of Clusters of the Polish People and the anatomy of Fr. Piotr Ściegienny’s conspiracy have been reconstructed. The text reproduces the utopian ideas of social reconstruction by Zenon Świętosławski and Ludwik Królikowski and based on these the text also shows the place of Christian socialism in the Polish socialist thought.

Relationship Between Competitive Strategies and the Success Perception of Polish Born Globals

Directory of Open Access Journals (Sweden)

Baranowska-Prokop Ewa

2014-09-01

Full Text Available The key objective of this paper is to describe and evaluate the competitive strategies applied by Polish born global enterprises. To reveal these strategies, two competitive models developed by M.E. Porter are applied to an original data set obtained from 256 small and medium Polish enterprises through a survey employing the CATI technique. The outcomes of these strategies, as perceived by the companies applying them, are also evaluated against two hypotheses. We conclude that Polish firms apply both basic strategies of competition, i.e. cost leadership strategies and differentiation strategies and that a substantial majority of companies perceive themselves to have succeeded on the market.

Polish students’ opinion about medicinal cannabis

Directory of Open Access Journals (Sweden)

Rafał Mazur

2017-09-01

Conclusions: Polish students seem to be ready for introduction into medical marijuana and are aware of its therapeutic potential. The majority is in favor of sales in a controlled manner. The task of researchers should be accurate examination of the effectiveness of specific cannabinoids in the treatment of diseases.

Stress 'deafness' in a language with fixed word stress: an ERP study on Polish

Directory of Open Access Journals (Sweden)

Ulrike eDomahs

2012-11-01

Full Text Available The aim of the present contribution was to examine the factors influencing the prosodic processing in a language with predictable word stress. For Polish, a language with fixed penultimate stress but several well-defined exceptions, difficulties in the processing and representation of prosodic information have been reported (e.g., Peperkamp & Dupoux, 2002. The present study utilized event-related potentials (ERPs to investigate the factors influencing prosodic processing in Polish. These factors are i the predictability of stress and ii the prosodic structure in terms of metrical feet. Polish native speakers were presented with correctly and incorrectly stressed Polish words and instructed to judge the correctness of the perceived stress patterns. For each stress violation an early negativity was found which was interpreted as reflection of an error-detection mechanism, and in addition exceptional stress patterns (= antepenultimate stress and post-lexical (= initial stress evoked a task-related positivity effect (P300 whose amplitude and latency is correlated with the degree of anomaly and deviation from an expectation. Violations involving the default (= penultimate stress in contrast did not produce such an effect. This asymmetrical result is interpreted to reflect that Polish native speakers are less sensitive to the default pattern than to the exceptional or post-lexical patterns. Behavioral results are orthogonal to the electrophysiological results showing that Polish speakers had difficulties to reject any kind of stress violation. Thus, on a meta-linguistic level Polish speakers appeared to be stress-‘deaf’ for any kind of stress manipulation, whereas the neural reactions differentiate between the default and lexicalized patterns.

Influence of Duroc breed inclusion into Polish Landrace maternal line on pork meat quality traits

Directory of Open Access Journals (Sweden)

DOMINIKA GUZEK

2016-06-01

Full Text Available Crossbreeding with Duroc breed allows to improve meat quality, but no data is available regarding specific influence of Duroc breed on characteristics of meat in the case of crossbreeding with various breeds. The aim of the present research was to evaluate the effect of crossbreeding Polish Landrace dames with Duroc sires on quality features of meat in reference to Polish Landrace breed. The objects of the study were Longissimus dorsi lumborum pork muscles obtained from Polish Landrace breed and Polish Landrace x Duroc crossbreed animals. Sarcomere length measurements were conducted using microscopic method and basic chemical composition measurement was analyzed using spectrophotometric scanning. Texture analysis of meat samples, performed after thermal treatment was expressed by Warner-Bratzler shear force and color analysis was obtained using CIE L*a*b* color system. No differences in sarcomere length, shear force as well as components of color values between pork meat originated from Polish Landrace breed and Polish Landrace x Duroc crossbreed were observed. Analysis of basic chemical composition revealed higher fat and lower ash contents in the case of meat of Polish Landrace breed animals. It was concluded that the actual impact of breed on meat characteristics is possibly altered by other factors. It may be suggested that influence of basic chemical composition on color of meat is breed-related.

Influence of Duroc breed inclusion into Polish Landrace maternal line on pork meat quality traits.

Science.gov (United States)

Guzek, Dominika; Głąbska, Dominika; Głąbski, Krzysztof; Wierzbicka, Agnieszka

2016-05-31

Crossbreeding with Duroc breed allows to improve meat quality, but no data is available regarding specific influence of Duroc breed on characteristics of meat in the case of crossbreeding with various breeds. The aim of the present research was to evaluate the effect of crossbreeding Polish Landrace dames with Duroc sires on quality features of meat in reference to Polish Landrace breed. The objects of the study were Longissimus dorsi lumborum pork muscles obtained from Polish Landrace breed and Polish Landrace x Duroc crossbreed animals. Sarcomere length measurements were conducted using microscopic method and basic chemical composition measurement was analyzed using spectrophotometric scanning. Texture analysis of meat samples, performed after thermal treatment was expressed by Warner-Bratzler shear force and color analysis was obtained using CIE L*a*b* color system. No differences in sarcomere length, shear force as well as components of color values between pork meat originated from Polish Landrace breed and Polish Landrace x Duroc crossbreed were observed. Analysis of basic chemical composition revealed higher fat and lower ash contents in the case of meat of Polish Landrace breed animals. It was concluded that the actual impact of breed on meat characteristics is possibly altered by other factors. It may be suggested that influence of basic chemical composition on color of meat is breed-related.

Research on Laser Micro Polishing of SLS Technology Sintered Iron-Based Powder Surface

Directory of Open Access Journals (Sweden)

Gerda Vaitkūnaitė

2015-03-01

Full Text Available The article analyzes laser micro polishing of 1.2083 steel samples produced applying selective laser sintering (SLS method. The study has evaluated the distribution of the shape, size and temperature of the laser beam treated area in the surface layer of sintered and laser polished samples. Experimental tests have shown the impact of the technical parameters of laser micro polishing on the width and hardness of the impact zone of the treated sample. The microstructure analysis of laser treated and untreated areas of the material has been made.

[Fifty years of the Polish School of Medicine at the University of Edinburgh (1941-1991)].

Science.gov (United States)

Tomaszewski, W

1994-01-01

The Polish School of Medicine at the University of Edinburgh started in 1941 on the initiative of the University. It was destined for soldier-students in the Polish Forces in Great Britain. This academic institution, unique in the history of universities, was a joint Scottish-Polish enterprise. An Agreement was concluded between the Polish Government in London and the University of Edinburgh. The School was an independent Polish academic institution and, at the same time, an integral part of the University of Edinburgh. The students matriculated at the University. The University provided all the laboratory and clinical facilities necessary for teaching. Due to a lack of Polish professors for some chairs a few of them were held by Scottish professors. Attached to them were Polish lecturers but the examinations were then held in English. The diploma, originally valid only in Poland, became recognised in Great Britain following an Act of Parliament in 1947. There were 337 students, a number of them women. 227 obtained the degree M.B., Ch.B. The war ended in 1945. The School continued up till 1949. Poland was not free. The Nazi occupation of Poland was replaced by Soviet domination which was to last for over 40 years. Only 22 of the graduates returned home, about 100 settled in G. Britain, another 100 dispersed world wide. The "magnanimous gesture" of the University of Edinburgh was thereafter remembered with gratitude by the members of the Polish School. In 1961, on the occasion of the 20th anniversary of the School, the first reunion of the graduates was organised in Birmingham for those settled in Gr. Britain. The success of the reunion prompted decision on organising annual "English" gatherings of the Polish graduates in Gr. Britain. The first world reunion of the graduates took place in Edinburgh in 1966, attracting a large number of participants on this occasion of the 25th anniversary of the School. That immensely successful anniversary of the Polish School

Recurrent APC gene mutations in Polish FAP families

Directory of Open Access Journals (Sweden)

Pławski Andrzej

2007-12-01

Full Text Available Abstract The molecular diagnostics of genetically conditioned disorders is based on the identification of the mutations in the predisposing genes. Hereditary cancer disorders of the gastrointestinal tracts are caused by mutations of the tumour suppressor genes or the DNA repair genes. Occurrence of recurrent mutation allows improvement of molecular diagnostics. The mutation spectrum in the genes causing hereditary forms of colorectal cancers in the Polish population was previously described. In the present work an estimation of the frequency of the recurrent mutations of the APC gene was performed. Eight types of mutations occurred in 19.4% of our FAP families and these constitute 43% of all Polish diagnosed families.

Clear and compelling evidence: the Polish tribunal on abortion rights.

Science.gov (United States)

Girard, Françoise; Nowicka, Wanda

2002-05-01

On 25 July 2001 the Polish Federation for Women and Family Planning organised a Tribunal on Abortion Rights in Warsaw, to publicize the negative consequences of the criminalization of abortion in Poland. A panel of Polish and foreign experts heard the testimonials of seven Polish women's experiences under the 1993 "Anti-Abortion Act". Only two of the seven women were able to tell their stories in person. One died in 2001, at the age of 21, of an unsafe abortion. One is legally blind after having carried her last pregnancy to term. One is in prison for infanticide, which in all likelihood was committed by her boyfriend. National and foreign journalists were in attendance, as well as observers from all walks of life--writers, students, mothers, activists, feminists, husbands. The evidence was clear and compelling. Restrictive abortion laws make abortion unsafe by pushing it underground, endanger women's health, create a climate where even those services that are allowed by law-become unavailable, and contravene standards set by international human rights law. The restrictive abortion law in Poland has not increased the number of births; it has only caused women and their families suffering. The Tribunal brought the issue of abortion into the media prior to an election campaign and galvanised Polish and other Eastern European women's groups to become more active in defence of abortion rights.

Fracking in the Polish press: Geopolitics and national identity

International Nuclear Information System (INIS)

Jaspal, Rusi; Nerlich, Brigitte; Lemańcyzk, Szczepan

2014-01-01

In a context of resource scarcity and political instability, new energy sources and technologies are being explored in many parts of the world and exploited in some. One of these new energy sources is shale gas and one of the countries seeking to decrease its energy dependence and increase its energy security is Poland which is largely dependent on gas and oil imports from Russia. This article presents the results of a thematic content analysis of articles reporting on shale gas/fracking published in Gazeta Wyborcza and Rzeczpospolita, two leading Polish newspapers, from 1 January 2010 to 31 December 2012. Findings suggest that in media reporting the geopolitical dimension of fracking overrides the technological/scientific dimension and that representations are overwhelmingly positive. Positive representations are bolstered through particular linguistic framings. It is argued that the Polish press has polarized the debate on fracking in a particular (positive) direction, which has silenced an open and constructive debate concerning energy policy in Poland and constructed criticism of fracking as counter-normative and “un-Polish.” The potential socio-political and policy implications of these media representations are discussed. - Highlights: • The general tone of Polish media reporting is positive and emphatic about the benefits of fracking. • The geopolitical dimension of fracking overrides the technological/scientific dimension. • The implementation of fracking is constructed as a national priority. • Opposition to fracking is constructed as counter-normative and “anti-Polish”. • Representations impede open and constructive dialogue about energy policy

Effect of finishing and polishing procedures on surface roughness, gloss and color of resin-based composites.

Science.gov (United States)

Paravina, Rade D; Roeder, Leslie; Lu, Huan; Vogel, Karin; Powers, John M

2004-08-01

To evaluate the effects of different finishing and polishing procedures on surface roughness, gloss and color of five resin composites: two experimental microhybrid composites - FZ-Dentin (FZD) and FZ-Enamel (FZE), one commercial microhybrid composite - Esthet-X (EX), and two microfilled composites - Heliomolar (HM) and Renamel Microfill (RM). Surface roughness, gloss and color of the disc-shaped specimens (10 mm in diameter and 2-mm thick) were measured as Mylar (baseline), 16-fluted carbide bur and polishing were completed. Sixteen specimens of each composite were randomized to four groups of four. After finishing with a 16-fluted finishing bur, each group was polished by a different system: 1. Astropol (A), 2. Sof-lex disc (S), 3. Po-Go (P), 4. Enhance (E). Average surface roughness (Ra) was measured with a profilometer. Gloss measurements were performed using small-area glossmeter, while color coordinate values were recorded using a spectrophotometer. A deltaE*abgloss ranked according to polishing system (for all five composites together) was: P > E > A > S. The order of gloss values for the polished composites (for each of four polishing systems) was: RM > FZD > FZE > HM > EX. Fisher's PLSD intervals at the 0.05 level of significance for comparisons of means of surface roughness among five composites and four polishing systems were 0.01 and 0.01 microm, respectively. Fisher's PLSD intervals at the 0.05 level of significance for comparisons of means of gloss among five composites and four polishing systems were 6 and 5 GU, respectively. Color differences (deltaE*ab) among five composites and four polishing methods were found to range from 0.2 to 1.1.

Word Boundaries in L2 Speech: Evidence from Polish Learners of English

Science.gov (United States)

Schwartz, Geoffrey

2016-01-01

Acoustic and perceptual studies investgate B2-level Polish learners' acquisition of second language (L2) English word-boundaries involving word-initial vowels. In production, participants were less likely to produce glottalization of phrase-medial initial vowels in L2 English than in first language (L1) Polish. Perception studies employing word…

Optimized pre-thinning procedures of ion-beam thinning for TEM sample preparation by magnetorheological polishing.

Science.gov (United States)

Luo, Hu; Yin, Shaohui; Zhang, Guanhua; Liu, Chunhui; Tang, Qingchun; Guo, Meijian

2017-10-01

Ion-beam-thinning is a well-established sample preparation technique for transmission electron microscopy (TEM), but tedious procedures and labor consuming pre-thinning could seriously reduce its efficiency. In this work, we present a simple pre-thinning technique by using magnetorheological (MR) polishing to replace manual lapping and dimpling, and demonstrate the successful preparation of electron-transparent single crystal silicon samples after MR polishing and single-sided ion milling. Dimples pre-thinned to less than 30 microns and with little mechanical surface damage were repeatedly produced under optimized MR polishing conditions. Samples pre-thinned by both MR polishing and traditional technique were ion-beam thinned from the rear side until perforation, and then observed by optical microscopy and TEM. The results show that the specimen pre-thinned by MR technique was free from dimpling related defects, which were still residual in sample pre-thinned by conventional technique. Nice high-resolution TEM images could be acquired after MR polishing and one side ion-thinning. MR polishing promises to be an adaptable and efficient method for pre-thinning in preparation of TEM specimens, especially for brittle ceramics. Copyright © 2017 Elsevier B.V. All rights reserved.

Changes of pituitary gland volume in Kennedy disease.

Science.gov (United States)

Pieper, C C; Teismann, I K; Konrad, C; Heindel, W L; Schiffbauer, H

2013-12-01

Kennedy disease is a rare X-linked neurodegenerative disorder caused by a CAG repeat expansion in the first exon of the androgen-receptor gene. Apart from neurologic signs, this mutation can cause a partial androgen insensitivity syndrome with typical alterations of gonadotropic hormones produced by the pituitary gland. The aim of the present study was therefore to evaluate the impact of Kennedy disease on pituitary gland volume under the hypothesis that endocrinologic changes caused by partial androgen insensitivity may lead to morphologic changes (ie, hypertrophy) of the pituitary gland. Pituitary gland volume was measured in sagittal sections of 3D T1-weighted 3T-MR imaging data of 8 patients with genetically proven Kennedy disease and compared with 16 healthy age-matched control subjects by use of Multitracer by a blinded, experienced radiologist. The results were analyzed by a univariant ANOVA with total brain volume as a covariant. Furthermore, correlation and linear regression analyses were performed for pituitary volume, patient age, disease duration, and CAG repeat expansion length. Intraobserver reliability was evaluated by means of the Pearson correlation coefficient. Pituitary volume was significantly larger in patients with Kennedy disease (636 [±90] mm(3)) than in healthy control subjects (534 [±91] mm(3)) (P = .041). There was no significant difference in total brain volume (P = .379). Control subjects showed a significant decrease in volume with age (r = -0.712, P = .002), whereas there was a trend to increasing gland volume in patients with Kennedy disease (r = 0.443, P = .272). Gland volume correlated with CAG repeat expansion length in patients (r = 0.630, P = .047). The correlation coefficient for intraobserver reliability was 0.94 (P pituitary volume that correlated with the CAG repeat expansion length. This could reflect hypertrophy as the result of elevated gonadotropic hormone secretion caused by the androgen receptor mutation with partial

Ranking of MR tomography after transsphenoidal resection of the pituitary. Retrospective comparison between endocrinology, surgery and MRT

International Nuclear Information System (INIS)

Siewert, B.; Kaiser, W.A.; Hochstetter, A.; Solymosi, L.; Bootsveld, K.

1994-01-01

Postoperative magnetic resonance images of 40 patients after transsphenoidal surgery for pituitary adenoma were evaluated retrospectively. The signal intensities of packing material and residual tumour were analysed. T 1 -weighted spin-echo sequences were obtained in coronal and sagittal views with and without intravenous injection of contrast media. Residual tumour demonstrated homogeneous or inhomogeneous signal intensity on the native scan with homogeneous or inhomogeneous enhancement. Packing material demonstrated a homogeneous signal intensity on the images obtained without injection of contrast media with a peripheral enhancement or alternate layers of low and intermediate signal intensity with alternate enhancement after injection of contrast media. In 5 of 54 examinations different results were found in MRI, endocrinology and surgery (two false negative and one false positive MRI in correlation with endocrinology; two residual tumours on MRI where surgery was supposed to be complete). Application of intravenous contrast media facilitates the interpretation of postoperative examination of the pituitary gland as well as comparison with preoperative examinations and the knowledge of the intraoperative procedure. (orig.) [de

[Evaluation of diabetic retinopathy screening using non-mydriatic fundus camera performed by physicians' assistants in the endocrinology service].

Science.gov (United States)

Barcatali, M-G; Denion, E; Miocque, S; Reznik, Y; Joubert, M; Morera, J; Rod, A; Mouriaux, F

2015-04-01

Since 2010, the High Authority for health (HAS) recommends the use of non-mydriatic fundus camera for diabetic retinopathy screening. The purpose of this study is to evaluate the results of screening for diabetic retinopathy using the non-mydriatic retinal camera by a physician's assistant in the endocrinology service. This is a retrospective study of all diabetic patients hospitalized in the endocrinology department between May 2013 and November 2013. For each endocrinology patient requiring screening, a previously trained physician's assistant performed fundus photos. The ophthalmologist then provided a written interpretation of the photos on a consultant's sheet. Of the 120 patients screened, 40 (33.3%) patients had uninterpretable photos. Among the 80 interpretable photos, 64 (53.4%) patients had no diabetic retinopathy, and 16 (13.3%) had diabetic retinopathy. No patient had diabetic maculopathy. Specific quality criteria were established by the HAS for screening for diabetic retinopathy using the non-mydriatic retinal camera in order to ensure sufficient sensitivity and specificity. In our study, the two quality criteria were not achieved: the rates of uninterpretable photos and the total number of photos analyzed in a given period. In our center, we discontinued this method of diabetic retinopathy screening due to the high rate of uninterpretable photos. Due to the logistic impossibility of the ophthalmologists taking all the fundus photos, we proposed that the ophthalmic nurses take the photos. They are better trained in the use of the equipment, and can confer directly with an ophthalmologist in questionable cases and to obtain pupil dilation as necessary. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Precision machining and polishing of scintillating crystals for large calorimeters and hodoscopes

International Nuclear Information System (INIS)

Wuest, C.R.; Fuchs, B.A.

1993-05-01

New machining and polishing techniques have been developed for large barium fluoride scintillating crystals that provide crystalline surfaces without sub-surface damage or deformation as verified by Atomic Force Microscopy (AFM) and Rutherford Back-scattering (RBS) analyses. Surface roughness of about 10--20 angstroms and sub-micron mechanical tolerances have been demonstrated on large crystal samples. Mass production techniques have also been developed for machining and polishing up to five 50 cm long crystals at one time. We present this technology along with surface studies of barium fluoride crystals polished with this technique. This technology is applicable for a number of new crystal detectors proposed at Colliders including the Barium Fluoride Electromagnetic Calorimeter at SSC, the Crystal Clear Collaboration's cerium fluoride calorimeter at LHC, and the KTeV and PHENIX scintillating hodoscopes at Fermilab, and RHIC, respectively. Lawrence Livermore National Laboratory (LLNL) has an active program of study on barium fluoride scintillating crystals for the Barium Fluoride Electromagnetic Calorimeter Collaboration and cerium fluoride and lead fluoride for the Crystal Clear Collaboration. This program has resulted in a number of significant improvements in the mechanical processing, polishing and coating of fluoride crystals. Techniques have been developed using diamond-loaded pitch lapping that can produce 15 angstrom RMS surface finishes over large areas. Also, special polishing fixtures have been designed based on mounting technology developed for the 1.1 m diameter optics used in LLNL's Nova Laser. These fixtures allow as many as five 25--50 cm long crystals to be polished and lapped at the same time with tolerances satisfying the stringent requirements of crystal calorimeters. We also discuss results on coating barium fluoride with UV reflective layers of magnesium fluoride and aluminum

OSSM2008 Polish Moessbauer Community Meeting: Program, Abstracts and List of Participants

International Nuclear Information System (INIS)

2008-01-01

The Polish Moessbauer Community Meeting - OSSM2008 has been organized by Polish scientists using the Moessbauer spectroscopy in their research. Main subjects of the meeting are investigations of modern materials electronic structure by means of Moessbauer effect (ME), using ME in biological test of tissue diseases and ME investigation of physical properties of different steels

Patients' poor communication with their doctors in the first visit of the gynecological endocrinology outpatient clinics.

Science.gov (United States)

Li, Xiao-Hong; Han, Zi-Yan; She, Wen-Jing; Lei, Hai-Ke

2016-01-01

To investigate patients' communication with their gynecologists in the first visit of the gynecological endocrinology outpatient clinics. We developed a questionnaire to evaluate 379 women' expectations of their first visit, information-giving about illness, and understanding of the consultation they encountered from April to August 2010. Descriptive statistics and multiple linear regression analysis were used to analyze the data. Before the first visit, 55% (208/379) of participants hoped to get the doctors' special attention, and 60% (227/379) of patients expected a very satisfying consultation. During the consultation, only 34% (129/379) of patients provided their case history clearly according to physicians' inquiry, 21% (81/379) of patients understood the examination and 28% (105/379) of patients understood the therapeutic regime after doctors' explanation. Correlation analysis showed that sociodemographic characteristics such as young age (under 20 years old), low level of education (primary school or less), and lack of medical knowledge affected patients' information-giving about illness and understanding of their first visit (all ps endocrinology outpatient clinics. They could not communicate well with their doctors, which was affected by age, education, and medical background.

Mechanical polishing as an improved surface treatment for platinum screen-printed electrodes

Directory of Open Access Journals (Sweden)

Junqiao Lee

2016-07-01

Full Text Available The viability of mechanical polishing as a surface pre-treatment method for commercially available platinum screen-printed electrodes (SPEs was investigated and compared to a range of other pre-treatment methods (UV-Ozone treatment, soaking in N,N-dimethylformamide, soaking and anodizing in aqueous NaOH solution, and ultrasonication in tetrahydrofuran. Conventional electrochemical activation of platinum SPEs in 0.5 M H2SO4 solution was ineffective for the removal of contaminants found to be passivating the screen-printed surfaces. However, mechanical polishing showed a significant improvement in hydrogen adsorption and in electrochemically active surface areas (probed by two different redox couples due to the effective removal of surface contaminants. Results are also presented that suggest that SPEs are highly susceptible to degradation by strong acidic or caustic solutions, and could potentially lead to instability in long-term applications due to continual etching of the binding materials. The ability of SPEs to be polished effectively extends the reusability of these traditionally “single-use” devices. Keywords: Screen-printed electrodes, Polishing, Platinum, Activation, Pre-treatment, Cyclic voltammetry

ECONOMIC CRISES – GLOBAL AND LOCAL – IN REFLECTION OF POLISH PRESS

Directory of Open Access Journals (Sweden)

Krzysztof Gibek

2010-01-01

Full Text Available One of the sociological features of the current economic crises had been its beginning as a media fact rather than economic reality for ordinary people in Poland. Until the very end of 2008 the offi cial strategy of Polish government was denying of present of any economic crises in Poland: “The Polish economy as well as Polish banking system are used to be healthy and in good conditions and we will be suffer a little slow done because we are not an island”. Unfortunately it occurs not to be true.Based on discourse analysis of two major Polish daily and two weekly we would like to show the evolution of narrative describing crises in global terms and particularly at the domestic market. What was the picture of global crises at the beginning of this discussion, how it supposed to affect Poland, who serve as experts and opinion givers and finally how through the language we can observe the change from ‘slow down’ to ‘crises’? This are basic questions we would like to answer in our text.

Profilometric analysis of two composite resins' surface repolished after tooth brush abrasion with three polishing systems.

Science.gov (United States)

Uppal, Mudit; Ganesh, Arathi; Balagopal, Suresh; Kaur, Gurleen

2013-07-01

To evaluate the effect of three polishing protocols that could be implemented at recall on the surface roughness of two direct esthetic restorative materials. Specimens (n = 40) measuring 8 mm (length) × 5 mm (width) × 4 mm (height) were fabricated in an acrylic mold using two light-cured resin-based materials (microfilled composite and microhybrid composite). After photopolymerization, all specimens were finished and polished with one of three polishing protocols (Enhance, One Gloss, and Sof-Lex polishing systems). The average surface roughness of each treated specimen was determined using 3D optical profilometer. Next all specimens were brushed 60,000 times with nylon bristles at 7200 rpm using crosshead brushing device with equal parts of toothpaste and water used as abrasive medium. The surface roughness of each specimen was measured after brushing followed by repolishing with one of three polishing protocols, and then, the final surface roughness values were determined. The data were analyzed using one-way and two-factor analysis of variance (ANOVA) and Tukey's honestly significant difference (HSD). Significant difference (P < 0.05) in surface roughness was observed. Simulated brushing following initial polishing procedure significantly roughened the surface of restorative material (P < 0.05). Polishing protocols can be used to restore a smooth surface on esthetic restorative materials following simulated tooth brushing.

Development of clean chemical mechanical polishing systems; Clean CMP system

Energy Technology Data Exchange (ETDEWEB)

Tsujimura, M.; Hosokawa, M. [Ebara Corp., Tokyo (Japan)

1998-10-20

Described herein are clean chemical mechanical polishing (CMP) systems developed by Ebara. A CMP system needs advanced peripheral techniques, in addition to those for grinding adopted by the conventional system, in order to fully exhibit its inherent functions. An integrated design concept is essential for the CMP steps, including slurry supplying, polishing, washing, process controlling and waste fluid treatment. The Ebara has adopted a standard concept `Clean CMP, dry-in and dry-out of wafers,` and provided world`s highest grades of techniques for inter-layer insulating film, shallow trench isolation, plug and wiring. The head for the polishing module is specially designed by FEM, to improve homogeneity of wafers from the center to edges. The dresser is also specially designed, to improve pad surface topolody after dressing. A slurry dipsersing method is developed to reduce slurry consumption. Various washing modules, designed to have the same external shape, can be allocated to various functions. 10 figs.

Soft tissue adhesion of polished versus glazed lithium disilicate ceramic for dental applications.

Science.gov (United States)

Brunot-Gohin, C; Duval, J-L; Azogui, E-E; Jannetta, R; Pezron, I; Laurent-Maquin, D; Gangloff, S C; Egles, C

2013-09-01

Ceramics are widely used materials for prosthesis, especially in dental fields. Despite multiple biomedical applications, little is known about ceramic surface modifications and the resulting cell behavior at its contact. The aim of this study is to evaluate the biological response of polished versus glazed surface treatments on lithium disilicate dental ceramic. We studied a lithium disilicate ceramic (IPS e.max(®) Press, Ivoclar Vivadent) with 3 different surface treatments: raw surface treatment, hand polished surface treatment, and glazed surface treatment (control samples are Thermanox(®), Nunc). In order to evaluate the possible modulation of cell response at the surface of ceramic, we compared polished versus glazed ceramics using an organotypic culture model of chicken epithelium. Our results show that the surface roughness is not modified as demonstrated by equivalent Ra measurements. On the contrary, the contact angle θ in water is very different between polished (84°) and glazed (33°) samples. The culture of epithelial tissues allowed a very precise assessment of histocompatibility of these interfaces and showed that polished samples increased cell adhesion and proliferation as compared to glazed samples. Lithium disilicate polished ceramic provided better adhesion and proliferation than lithium disilicate glazed ceramic. Taken together, our results demonstrate for the first time, how it is possible to use simple surface modifications to finely modulate the adhesion of tissues. Our results will help dental surgeons to choose the most appropriate surface treatment for a specific clinical application, in particular for the ceramic implant collar. Copyright © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

The variation of estrus in endocrinological levels and behaviour in endocrinological ewes throughout the year

International Nuclear Information System (INIS)

Basaran, A.; Saban, E. D.

2002-01-01

An investigation was carried out to determine reproductive activity of endocrinological and behavior in Akkaraman sheep (n=20.25 years, 74±7.7 body weight) throughout the year in the Middle Anatolian (39 57 deg. N 32.53 deg. W). The onset of estrous was detected by using apron ram for 30-minute period twice a day. Blood samples collected twice a week were analyzed by Enzyme immunoassay for progesterone (p 4 ), by Radio immunoassay for estradiol. Estrus cycle lengths and estrous lengths were (mean±SD) 18.33±1.03 day, 35.16±5.95 hours, respectively. The breeding season lengths were 283±63.36 day and 229.64±63.74 day according to hormonal and behavior data, respectively (P≤0.0032). Frequency of occurrence estrus was high between August and March however the highest peak was in October. The lowest peaks were both in June and July. Plasma progesterone levels were changed between 0.01-9 ng/ml throughout the year and 0.2-0.16 ng/ml in anoestrus. P 4 level of 11-th day of luteal phase of estrus was 3.73±1.50 ng/ml (n=11). Plasma estradiol level was 8.42±2.51 pg/ml between of 1-st and 2-nd day and 3.50±1.50 pg/ml on day 15. Second peak of estradiol determined on day 11 of estrus cycle was 6.09±2.87 pg/ml (n=11)

Is hypochondriasis a significant problem among polish adolescents? An attempt of assessment of severe form of health anxiety in polish population

Directory of Open Access Journals (Sweden)

Janusz Kocjan

2017-08-01

[Conclusions] The study provides evidence about moderate intensification of health anxiety among polish adolescent. Health anxiety level was significantly higher among medical students versus non-medical students group.

A Study of Polishing Feature of Ultrasonic-Assisted Vibration Method in Bamboo Charcoal

Directory of Open Access Journals (Sweden)

Hsin-Min Lee

2017-01-01

Full Text Available Focusing on the feature of porosity in bamboo charcoal, this study applies the ultrasonic-assisted vibration method to perform surface polishing of the silicon wafer workpiece. The self-developed bamboo charcoal polishing spindle and ultrasonic- assisted vibration mechanism are attached to a single lapping machine. In the machining process, ultrasonic vibration enables the diamond slurry to smoothly pass through the microscopic holes of bamboo charcoal; the end of the bamboo charcoalis able to continue machining on the surface of the workpiece through the grasping force which exists in the microscopic holes. Under the polishing and machining parameters of ultrasonic-assisted vibration, with a diamond slurry concentration of 0.3%, the experimental results show a polishing time of 20 min, a loading of 25 N on the workpiece surface, a spindle speed of 1200 rpm, a vibration frequency of 30 kHz and the original surface roughness value of Ra 0.252 μm equals that of a mirror-like surface at Ra 0.017 μm. These research results prove that by using bamboo charcoal and ultrasonic-assisted vibration for polishing, a very good improvement can be achieved on the workpiece surface.

Globes and Teaching Aids Manufactured by Jan Felkl Company for the Polish Market

Directory of Open Access Journals (Sweden)

Malgorzata Taborska

2016-05-01

Full Text Available Jan Felkl company from Roztoky (Roztok near Prague manufactured globes in seventeen language versions, since 1861 also in Polish language. The company was active until 1952, but it ceased to manufacture Polish-language globes as early as in 1914. In the aftermath of the First World War, and with the development of printing business, the demand for Czech globes shrank. It is difficult to estimate the overall output of Polish- language globes manufactured by Felkl’s company throughout the 53 years it operated. From catalogues and the surviving globes we know that terrestrial globes in six sizes, folding globes in two sizes, celestial globes (probably in four sizes, as well as telluria, lunaria and planetaria were manufactured for the Polish market. It is difficult to decide how many editions of individual types of globes were issued. Polish names were compiled by Franciszek Waligórski (one globe and Mirosław Suchecki. Only 28 globes have survived to this day, including one celestial globe. Most of them are globes of an 8-inch diameter, approved by the Austrian ministries as teaching aids for schools. Nearly half of the surviving globes date from the years 1894–1914. Only ten items are in museums.

Are Polish Primary School Pupils in Favor of Wearing Uniforms? Snapshot Comment

Science.gov (United States)

Asotska, Julia; Butler, Norman L.; Davidson, Barry S.; Griffith, Kimberly Grantham; Brown, Veda E.; Kritsonis, Wiilliam Allan

2007-01-01

The purpose of this article is to discuss whether Polish primary school pupils want to wear uniforms, and it is motivated by the Polish government's recently proposed policy: Zero Tolerance for Violence at School. Seventy one pupils, who attend Podstawowka Nr30 school in Cracow, were surveyed, and the authors found that most pupils are not in…

Combined Ultrasonic Elliptical Vibration and Chemical Mechanical Polishing of Monocrystalline Silicon

Directory of Open Access Journals (Sweden)

Liu Defu

2016-01-01

Full Text Available An ultrasonic elliptical vibration assisted chemical mechanical polishing(UEV-CMP is employed to achieve high material removal rate and high surface quality in the finishing of hard and brittle materials such as monocrystalline silicon, which combines the functions of conventional CMP and ultrasonic machining. In theultrasonic elliptical vibration aided chemical mechanical polishingexperimental setup developed by ourselves, the workpiece attached at the end of horn can vibrate simultaneously in both horizontal and vertical directions. Polishing experiments are carried out involving monocrystalline silicon to confirm the performance of the proposed UEV-CMP. The experimental results reveal that the ultrasonic elliptical vibration can increase significantly the material removal rate and reduce dramatically the surface roughness of monocrystalline silicon. It is found that the removal rate of monocrystalline silicon polished by UEV-CMP is increased by approximately 110% relative to that of conventional CMP because a passive layer on the monocrystalline silicon surface, formed by the chemical action of the polishing slurry, will be removed not only by the mechanical action of CMP but also by ultrasonic vibration action. It indicates that the high efficiency and high quality CMP of monocrystalline silicon can be performed with the proposed UEV-CMP technique.

Problems in laser repair welding of polished surfaces

Directory of Open Access Journals (Sweden)

A. Skumavc

2014-10-01

Full Text Available This paper presents problems in laser repair welding of the tools for injection moulding of plastics and light metals. Tools for injection moulding of the car headlamps are highly polished in order to get a desirable quality of the injected part. Different light metals, glasses, elastomers, thermoplastics and thermosetting polymers are injected into the die cavity under high pressures resulting in the surface damages of the tool. Laser welding is the only suitable repair welding technique due to the very limited sputtering during deposition of the filler metal. Overlapping of the welds results in inhomogeneous hardness of the remanufactured surface. Results have shown strong correlation between hardness and surface waviness after final polishing of the repair welded surface.

Natural immunity factors in Polish mixed breed rabbits.

Science.gov (United States)

Tokarz-Deptuła, B; Niedźwiedzka-Rystwej, P; Adamiak, M; Hukowska-Szematowicz, B; Trzeciak-Ryczek, A; Deptuła, W

2015-01-01

Mixed-breed rabbits in Poland are widely used for diagnostic and scientific research and as utility animals, therefore there is a need to know their immunological status, as well as their haematological status. In this study natural immunity factors were analyzed in Polish mixed-breed rabbits and Polish mixed-breed rabbits with addition of blood of meet-breed, considering the impact of sex and season of the year (spring, summer, autumn, winter) using measurement of non-specific cellular and humoral immunity parameters in peripheral blood. The study has revealed that there is a variety between the two commonly used mixed-breed types of rabbits, especially when sex and season is concerned, which is crucial for using these animals in experiments.

Africa and Its People in the Polish Media

Directory of Open Access Journals (Sweden)

Średziński Paweł

2017-06-01

Full Text Available The African continent is treated by the Polish media marginally and usually seen through the lens of four domains of stereotypical perceptions that are associated with difficult life conditions, threats and dangers, beautiful and wild nature, as well as original and diverse cultures. Monitoring of the Polish media has become very important in this situation. That is why the results of first media monitoring report were published in 2011 by ‘Africa Another Way’ Foundation. Five years later the monitoring was repeated. It is hard to resist the impression that Africa is still viewed as this poor, underdeveloped and dangerous continent. And the way it is presented translates into the way individuals of African descent are perceived.

The effect of polishing technique on 3-D surface roughness and gloss of dental restorative resin composites.

Science.gov (United States)

Ereifej, N S; Oweis, Y G; Eliades, G

2013-01-01

The aim of this study was to compare surface roughness and gloss of resin composites polished using different polishing systems. Five resin composites were investigated: Filtek Silorane (FS), IPS Empress Direct (IP), Clearfil Majesty Posterior (CM), Premise (PM), and Estelite Sigma (ES). Twenty-five disk specimens were prepared from each material, divided into five groups, each polished with one of the following methods: Opti1Step (OS), OptiDisc (OD), Kenda CGI (KD), Pogo (PG), or metallurgical polishing (ML). Gloss and roughness parameters (Sa, Sz, Sq, and St) were evaluated by 60°-angle glossimetry and white-light interferometric profilometry. Two-way analysis of variance was used to detect differences in different materials and polishing techniques. Regression and correlation analyses were performed to examine correlations between roughness and gloss. Significant differences in roughness parameters and gloss were found according to the material, type of polishing, and material/polishing technique (pgloss was recorded for PM/ML (88.4 [2.3]) and lowest for FS/KD (30.3 [5.7]). All roughness parameters were significantly correlated with gloss (r= 0.871, 0.846, 0.713, and 0.707 for Sa, Sq, Sz, St, and gloss, respectively). It was concluded that the polishing procedure and the type of composite can have significant impacts on surface roughness and gloss of resin composites.

A novel vibration assisted polishing device based on the flexural mechanism driven by the piezoelectric actuators

Directory of Open Access Journals (Sweden)

Guilian Wang

2018-01-01

Full Text Available The vibration assisted polishing has widely application fields because of higher machining frequency and better polishing quality, especially the polishing with the non-resonant mode that is regarded as a kind of promising polishing method. This paper reports a novel vibration assisted polishing device, consisting of the flexible hinge mechanism driven by the piezoelectric actuators, which is suitable for polishing planes or curve surfaces with slow curvature. Firstly, the generation methods of vibration trajectory are investigated for the same frequency and different frequency signals’ inputs, respectively, and then the types of elliptic and Lissajous’s vibration trajectories are generated respectively. Secondly, a flexural mechanism consisting of the right circular flexible hinges and the leaf springs is developed to produce two-dimensional vibration trajectory. Statics and dynamics investigating of this flexible mechanism are finished in detail. The analytical models about input and output compliances of the flexural mechanism are established according to the matrix-based compliance modeling, and the dynamic model of the flexural mechanism based on the Euler-Lagrange equation is also presented. The finite element model of the flexural mechanism was established to carry out the numerical simulation in order to testify the rationality of device design. Finally, the polishing experiment is carried out to prove the effectiveness of the vibration device. The experimental results show that this novel vibration assisted polishing device developed in this study can remove more effectively the cutting marks left by last process and obviously reduce the workpiece surface roughness.

The Polish family under Stalinist subjugation [Rodzina w sytuacji stalinowskiego zniewolenia

Directory of Open Access Journals (Sweden)

Elwira JOLANTA KRYŃSKA

2016-06-01

Full Text Available The situation of Polish families during Stalinist subjugation was particularly arduous. The family was treated as an important part of the political system’s socialization which was not rooted at all in the sphere of traditional values and norms developed in the process of historical progress of the Polish statehood. Due to the foundations of Latin civilization based on personalization that were cherished by Polish families, cynical endeavors to take away freedom, legal capacity and personal property – the objectives which Stalinism aimed at both indirectly and directly – failed, which destroyed the communists’ plans. The family did not cease to be the most important centre of human life and development. Theoreticians of a „new deal” did not manage to limit the family to the role of a „basic social unit” of „socialist morality”.

Terminology extraction from medical texts in Polish.

Science.gov (United States)

Marciniak, Małgorzata; Mykowiecka, Agnieszka

2014-01-01

Hospital documents contain free text describing the most important facts relating to patients and their illnesses. These documents are written in specific language containing medical terminology related to hospital treatment. Their automatic processing can help in verifying the consistency of hospital documentation and obtaining statistical data. To perform this task we need information on the phrases we are looking for. At the moment, clinical Polish resources are sparse. The existing terminologies, such as Polish Medical Subject Headings (MeSH), do not provide sufficient coverage for clinical tasks. It would be helpful therefore if it were possible to automatically prepare, on the basis of a data sample, an initial set of terms which, after manual verification, could be used for the purpose of information extraction. Using a combination of linguistic and statistical methods for processing over 1200 children hospital discharge records, we obtained a list of single and multiword terms used in hospital discharge documents written in Polish. The phrases are ordered according to their presumed importance in domain texts measured by the frequency of use of a phrase and the variety of its contexts. The evaluation showed that the automatically identified phrases cover about 84% of terms in domain texts. At the top of the ranked list, only 4% out of 400 terms were incorrect while out of the final 200, 20% of expressions were either not domain related or syntactically incorrect. We also observed that 70% of the obtained terms are not included in the Polish MeSH. Automatic terminology extraction can give results which are of a quality high enough to be taken as a starting point for building domain related terminological dictionaries or ontologies. This approach can be useful for preparing terminological resources for very specific subdomains for which no relevant terminologies already exist. The evaluation performed showed that none of the tested ranking procedures were

Directory of Polish Officials: A Reference Aid

Science.gov (United States)

1989-04-01

Jan 86 Deputy Director Mondalski, Janusz Aug 83 Polish Steamship Company (Polski Zegluga Morska ) (PZM) Director Andruczyk, Mieczyslaw Jan...2<> Polski Kosciol Chrzescijan Baptystow 12° Polski Linie Oceaniczne ’"- Polski Towarzystwo Ekonomiczne ’’° Polski Zegluga Morska 102 Polski

Surface qualities after chemical-mechanical polishing on thin films

International Nuclear Information System (INIS)

Fu, Wei-En; Lin, Tzeng-Yow; Chen, Meng-Ke; Chen, Chao-Chang A.

2009-01-01

Demands for substrate and film surface planarizations significantly increase as the feature sizes of Integrated Circuit (IC) components continue to shrink. Chemical Mechanical Polishing (CMP), incorporating chemical and mechanical interactions to planarize chemically modified surface layers, has been one of the major manufacturing processes to provide global and local surface planarizations in IC fabrications. Not only is the material removal rate a concern, the qualities of the CMP produced surface are critical as well, such as surface finish, defects and surface stresses. This paper is to examine the CMP produced surface roughness on tungsten or W thin films based on the CMP process conditions. The W thin films with thickness below 1000 nm on silicon wafer were chemical-mechanical polished at different down pressures and platen speeds to produce different surface roughness. The surface roughness measurements were performed by an atomic force microscope (DI D3100). Results show that the quality of surface finish (R a value) is determined by the combined effects of down pressures and platen speeds. An optimal polishing condition is, then, possible for selecting the down pressures and platen speeds.

Commentary: Parallel Evolution of Molecular Endocrinology as a Journal and a Discipline: Convergence of Interests with the National Institute of Diabetes and Digestive and Kidney Diseases (NIDDK/NIH)

Science.gov (United States)

Margolis, Ronald; Smith, Philip

2010-01-01

The National Institute of Diabetes and Digestive and Kidney Diseases (NIDDK) celebrates in 2010 its 60th year as an institute of the National Institutes of Health. NIDDK has been fundamental in providing support for research in endocrinology, fostering research to elucidate basic principles of endocrine signaling leading to understanding of diseases and disorders of hormone action. Over this time span, a move to a more molecular level in understanding of the basis of hormone action has emerged and been supported by NIDDK, with many advances finding their way into a new journal, Molecular Endocrinology. The merging of disciplines that has made this possible constitutes a major force for further progress as NIDDK moves forward over the next 60 yr. Together, NIDDK and Molecular Endocrinology have served as catalysts for advancing knowledge in the field, energizing new paradigms that have led to advances in the clinic. PMID:20660301

Effects of delayed finishing/polishing on surface roughness, hardness and gloss of tooth-coloured restorative materials.

Science.gov (United States)

Yazici, A Ruya; Tuncer, Duygu; Antonson, Sibel; Onen, Alev; Kilinc, Evren

2010-01-01

The aim of this study was to investigate the effect of delayed finishing/polishing on the surface roughness, hardness and gloss of tooth-coloured restorative materials. Four different tooth-coloured restoratives: a flowable resin composite- Tetric Flow, a hybrid resin composite- Venus, a nanohybrid resin composite- Grandio, and a polyacid modified resin composite- Dyract Extra were used. 30 specimens were made for each material and randomly assigned into three groups. The first group was finished/polished immediately and the second group was finished/polished after 24 hours. The remaining 10 specimens served as control. The surface roughness of each sample was recorded using a laser profilometer. Gloss measurements were performed using a small-area glossmeter. Vickers microhardness measurements were performed from three locations on each specimen surface under 100g load and 10s dwell time. Data for surface roughness and hardness were analyzed by Kruskal Wallis test and data for gloss were subjected to one-way ANOVA and Tukey test (P gloss values were recorded under Mylar strip for all materials. While delayed finishing/polishing resulted in a significantly higher gloss compared to immediate finishing/polishing in Venus samples (P .05). The lowest hardness values were found under Mylar strip. Delayed finishing/polishing significantly increased the hardness of all materials. The effect of delayed finishing/polishing on surface roughness, gloss and hardness appears to be material dependent.

Buffered Electrochemical Polishing of Niobium

Energy Technology Data Exchange (ETDEWEB)

Ciovati, Gianluigi [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Tian, Hui [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); College of William and Mary, Williamsburg, VA (United States); Corcoran, Sean [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States)

2011-03-01

The standard preparation of superconducting radio-frequency (SRF) cavities made of pure niobium include the removal of a 'damaged' surface layer, by buffered chemical polishing (BCP) or electropolishing (EP), after the cavities are formed. The performance of the cavities is characterized by a sharp degradation of the quality factor when the surface magnetic field exceeds about 90 mT, a phenomenon referred to as 'Q-drop.' In cavities made of polycrystalline fine grain (ASTM 5) niobium, the Q-drop can be significantly reduced by a low-temperature (? 120 °C) 'in-situ' baking of the cavity if the chemical treatment was EP rather than BCP. As part of the effort to understand this phenomenon, we investigated the effect of introducing a polarization potential during buffered chemical polishing, creating a process which is between the standard BCP and EP. While preliminary results on the application of this process to Nb cavities have been previously reported, in this contribution we focus on the characterization of this novel electrochemical process by measuring polarization curves, etching rates, surface finish, electrochemical impedance and the effects of temperature and electrolyte composition. In particular, it is shown that the anodic potential of Nb during BCP reduces the etching rate and improves the surface finish.

Slower nicotine metabolism among postmenopausal Polish smokers.

Science.gov (United States)

Kosmider, Leon; Delijewski, Marcin; Koszowski, Bartosz; Sobczak, Andrzej; Benowitz, Neal L; Goniewicz, Maciej L

2018-06-01

A non-invasive phenotypic indicator of the rate of nicotine metabolism is nicotine metabolite ratio (NMR) defined as a ratio of two major metabolites of nicotine - trans-3'-hydroxycotinine/cotinine. The rate of nicotine metabolism has important clinical implications for the likelihood of successful quitting with nicotine replacement therapy (NRT). We conducted a study to measure NMR among Polish smokers. In a cross-sectional study of 180 daily cigarette smokers (42% men; average age 34.6±13.0), we collected spot urine samples and measured trans-3'-hydroxycotinine (3-HC) and cotinine levels with LC-MS/MS method. We calculated NMR (molar ratio) and analyzed variations in NMR among groups of smokers. In the whole study group, an average NMR was 4.8 (IQR 3.4-7.3). The group of women below 51 years had significantly greater NMR compared to the rest of the population (6.4; IQR 4.1-8.8 vs. 4.3; IQR 2.8-6.4). No differences were found among group ages of male smokers. This is a first study to describe variations in nicotine metabolism among Polish smokers. Our findings indicate that young women metabolize nicotine faster than the rest of population. This finding is consistent with the known effects of estrogen to induce CYP2A6 activity. Young women may require higher doses of NRT or non-nicotine medications for most effective smoking cessation treatment. Copyright © 2017 Institute of Pharmacology, Polish Academy of Sciences. Published by Elsevier B.V. All rights reserved.

Upgrade of pipelines operated in a Polish conditions in accordance with European Standards

International Nuclear Information System (INIS)

Witek, M.

2007-01-01

This paper presents some aspects of changing polish technical requirements concerning high pressure gas pipelines in accordance with European Norm 1594 '' Gas supply system. Pipelines with maximum operating pressure over 16 bar. Functional requirements ''. An additional class location of the steel pipelines was analyzed and supported by the results on numerous pipeline cases in Poland. Minimum distances between pipelines and buildings are given as a proposal to upgrading polish technical law in the area of the gas grid. Special attention in analysis was given to the polish existing high pressure gas network and calculation examples of existing types of steel used in pipeline construction in the past. (author)

Apparatus and method for deterministic control of surface figure during full aperture polishing

Science.gov (United States)

Suratwala, Tayyab Ishaq; Feit, Michael Dennis; Steele, William Augustus

2013-11-19

A polishing system configured to polish a lap includes a lap configured to contact a workpiece for polishing the workpiece; and a septum configured to contact the lap. The septum has an aperture formed therein. The radius of the aperture and radius the workpiece are substantially the same. The aperture and the workpiece have centers disposed at substantially the same radial distance from a center of the lap. The aperture is disposed along a first radial direction from the center of the lap, and the workpiece is disposed along a second radial direction from the center of the lap. The first and second radial directions may be opposite directions.

Professional Training of Economists at Polish Universities

Science.gov (United States)

Ogienko, Olena

2016-01-01

Polish experience in professional training of economists at university has been generalized. Structural, content and procedural peculiarities of the training have been defined. It has been proved that key factors for reforming economic education in Poland are globalization, internationalization, integration, technologization and informatization.…

Study on reproductive endocrinological function in postmenopausal women treated with estriol

International Nuclear Information System (INIS)

Li Wenqi; Zhou Zhenli; Zhou Jiwen; Li Xin

2002-01-01

Objective: To investigate the reproductive endocrinological function in postmenopausal women treated with ultralente estriol for 3 years. Methods: Serum levels of six reproductive hormones (FSH, LH, PRL, T, E 2 , P) were measured with RIA in 1) 136 normal 1-5yrs post-menopausal women 2) 48 post-menopausal women treated with estriol for 3 years 3) 131 healthy women of child-bearing age during follicular and luteal phases. Results: Serum levels of the six reproductive hormones in women of child-bearing age at both follicular and luteal phases were significantly different from those in post-menopausal women (p 2 , P and T levels were not significant (p > 0.05). Conclusion: Serum reproductive hormones assay is important for monitoring hormone replacement therapy in aging women

Polish media and public opinion on NPP Mochovce commissioning

International Nuclear Information System (INIS)

Latek, Stanislaw

1999-01-01

The so called 'Mochovce Problem' was one of the major topics in Polish media in the period from May to July 1998. The nuclear power plant commissioning caused an unexpectedly strong reaction, especially in the newspapers, slightly less so in electronic media. Faced with clearly hostile media reaction to Mochovce NPP, the National Atomic Energy Agency representatives, together with atomic and nuclear experts, undertook to change these attitudes. In numerous interviews, letters to the editors and talks with journalists, they attempted to correct the mistakes, explain the true safety situation in the nuclear power plant, by whom it was constructed, who supervised and tested the systems and so on. The completion of Mochovce NPP construction improved significantly the electricity balance in Slovakia, thus decreasing the pressure for continuing the operation of older Bohunice V1 units beyond their design lifetime. For this reason, as well as in view of striving for improvement in environmental factors beyond Polish southern border, especially after Kyoto/97 decisions on greenhouse gases emissions, the public opinion in Poland should support the Mochovce NPP construction. In 1996 Poland has signed with Slovakia a bilateral inter-governmental agreement on the prompt notification on nuclear accidents and on the cooperation in the nuclear safety and radiological protection matters. On the basis of this agreement the experts from Polish National Atomic Energy Agency are in perpetual contact with Slovakian Nuclear Regulatory Body and in each and every moment can obtain full and comprehensive information on the plant parameters iportant for nuclear safety. The experts explanations, together with the NAEA top management visit to the plant itself, brought some results. The media became less aggressive, and Polish public and authorities - contrary to the Austrians - do not protest loudly against the commissioning of this newest European NPP. Now, in December 1998, the tune of

Surface texture of resin-modified glass ionomer cements: effects of finishing/polishing time.

Science.gov (United States)

Yap, A U J; Ong, S B; Yap, W Y; Tan, W S; Yeo, J C

2002-01-01

This study compared the surface texture of resin-modified glass ionomer cements after immediate and delayed finishing with different finishing/polishing systems. Class V preparations were made on the buccal and lingual/palatal surfaces of 64 freshly extracted teeth. The cavities on each tooth were restored with Fuji II LC (GC) and Photac-Fil Quick (3M-ESPE) according to manufacturers' instructions. Immediately after light-polymerization, gross finishing was done with 8-fluted tungsten carbide burs. The teeth were then randomly divided into four groups of 16 teeth. Half of the teeth in each group were finished immediately, while the remaining half were finished after one-week storage in distilled water at 37 degrees C. The following finishing/polishing systems were employed: (a) Robot Carbides; (b) Super-Snap system; (c) OneGloss and (d) CompoSite Polishers. The mean surface roughness (microm; n=8) in vertical (RaV) and horizontal (RaH) axis was measured using a profilometer. Data was subjected to ANOVA/Scheffe's tests and Independent Samples t-test at significance level 0.05. Ra values were generally lower in both vertical and horizontal axis with delayed finishing/polishing. Although significant differences in RaV and RaH values were observed among several systems with immediate finishing/polishing, only one (Fuji II LC: RaH - Super-Snap < Robot Carbides) was observed with delayed finishing.

PET-CT in endocrinology

International Nuclear Information System (INIS)

Parysow, O.; Jager, V.; Racioppi, S.; Mollerach, A.M.; Collaud, C.; Arma, I.

2008-01-01

PET/CT scans have reached an important place in the evaluation of endocrine tumors. The metabolic marker 18F-FDG is the most widespread over the world, and, for the time being, it is the only one available in our country. The limitations of this technique in Endocrinology include high differentiation and low aggressiveness of most endocrine tumors, and low detection rate for low cellularity and/or small lesions. Indications for PET/CT scan in these tumors should be precise, due to the fact that not all of these lesions are significantly glucose-avid and to extract the maximum diagnostic efficacy of this modality to achieve the optimum diagnostic accuracy. The most important indication is DTC with high Tg levels and negative 131-Iodine scans. It is advisable to indicate a PET/CT scan in patients with Tg > 10 ng/ml and stimulated TSH (endogenous or exogenous). The aim is to locate recurrences and metastases in order to remove them, either surgically or by any other therapy alternative to 131 I. Due to higher uptake in more aggressive lesions, this study has a high prognostic value. In patients with high Tg levels, negative 131 I scan, and abnormal FDG uptake, the practitioner must act more aggressively in order to remove the pathologic foci, while with a negative FDG -PET scan, the conduct can be expectant, with periodic follow-up. The introduction of other positron-emitting tracers like 124-Iodine, is likely to yield superior quality images and provide better diagnoses. FDG has a limited efficiency in neuroendocrine tumors, unless they show a significant level of dedifferentiation. The scan is indicated in MTC, when calcitonin levels are above 1000 pg/ml, in order to locate the tumor sites. With the introduction of more specific positron-emitting radiopharmaceuticals, such as 18F-DOPA, 68Ga DOTA, 11C methomidate, 11C-hydroxytryptophan and others, it will be possible to study the metabolic-molecular behavior of these tumors with a more accurate approach. (author) [es

On the generation of surface depressions in polishing polycrystalline diamond compacts

International Nuclear Information System (INIS)

Tang, Fengzai; Chen, Yiqing; Zhang, Liangchi

2014-01-01

This paper investigates the surface depressions generated during the polishing of the (1 1 1) surfaces of polycrystalline diamond (PCD) compacts when using the dynamic friction polishing (DFP) method. It was found that surface depressions of six-sided faces along octahedral planes were the typical features created by the DFP. Although the size of the well-developed depressions can vary significantly, the rectilinear edges are always aligned with the directions. Pronounced {1 1 1} planar defects (i.e., twins) were revealed underneath a depression apex. The interception of the defect plane with the polished surface accounts for the generation of the aligned depressions and for the discernible asymmetry of the pyramidal faces with respect to the (1 1 1) plane. It was revealed that the attached debris layer on the PCD surfaces contained sp 2 -bounded amorphous carbon and nano-sized crystals. (paper)

Feasibility and patient acceptability of a novel artificial intelligence-based screening model for diabetic retinopathy at endocrinology outpatient services: a pilot study.

Science.gov (United States)

Keel, Stuart; Lee, Pei Ying; Scheetz, Jane; Li, Zhixi; Kotowicz, Mark A; MacIsaac, Richard J; He, Mingguang

2018-03-12

The purpose of this study is to evaluate the feasibility and patient acceptability of a novel artificial intelligence (AI)-based diabetic retinopathy (DR) screening model within endocrinology outpatient settings. Adults with diabetes were recruited from two urban endocrinology outpatient clinics and single-field, non-mydriatic fundus photographs were taken and graded for referable DR ( ≥ pre-proliferative DR). Each participant underwent; (1) automated screening model; where a deep learning algorithm (DLA) provided real-time reporting of results; and (2) manual model where retinal images were transferred to a retinal grading centre and manual grading outcomes were distributed to the patient within 2 weeks of assessment. Participants completed a questionnaire on the day of examination and 1-month following assessment to determine overall satisfaction and the preferred model of care. In total, 96 participants were screened for DR and the mean assessment time for automated screening was 6.9 minutes. Ninety-six percent of participants reported that they were either satisfied or very satisfied with the automated screening model and 78% reported that they preferred the automated model over manual. The sensitivity and specificity of the DLA for correct referral was 92.3% and 93.7%, respectively. AI-based DR screening in endocrinology outpatient settings appears to be feasible and well accepted by patients.

Microbial endocrinology: Why the intersection of microbiology and neurobiology matters to poultry health.

Science.gov (United States)

Villageliu, Daniel N; Lyte, Mark

2017-08-01

The union of microbiology and neurobiology has led to a revolution in the way we view the microbiome. Now recognized as important symbionts, the microorganisms which inhabit multiple niches in mammalian and avian (chicken) hosts, such as the intestinal tract and skin, serve and influence many important physiological functions. The realization that the gut microbiome serves as a kind of "microbial organ" has important implications for many areas of biology. In this paper advances in the field of microbial endocrinology which may hold relevance for the poultry industry are examined. © 2017 Poultry Science Association Inc.

Detection of Giardia intestinalis infections in Polish soldiers deployed to Afghanistan.

Science.gov (United States)

Korzeniewski, Krzysztof; Konior, Monika; Augustynowicz, Alina; Lass, Anna; Kowalska, Ewa

2016-01-01

Members of the Polish Military Contingent (PMC) have been stationed in Afghanistan since 2002. They typically serve in areas characterised by low standards of sanitation which often leads to the development of food- and waterborne diseases. The aim of the study was to evaluate the prevalence of Giardia intestinalis infections among Polish soldiers deployed to Afghanistan. The research study was conducted as part of a programme for prevention of parasitic diseases of the gastrointestinal tract run by the Polish Armed Forces. The study was carried out in August 2011; it involved 630 asymptomatic Polish soldiers serving in the Forward Operational Base (FOB) Ghazni in eastern Afghanistan. Stool specimens obtained from members of the PMC were first tested in FOB Ghazni (detection of Giardia intestinalis by Rida Quick Giardia immunochromatographic tests and Ridascreen Giardia immunoenzymatic tests - single samples). Next, the same biological material and two other faecal specimens fixed in 10% formalin were transported to the Military Institute of Medicine in Poland, where they were tested for Giardia intestinalis under light microscopy (direct smear, decantation in distilled water). Parasitological tests performed under light microscopy showed that 2.7% (17/630) of the study group were infected with Giardia intestinalis. Some of these results were confirmed by immunochromatographic tests (6/630). In contrast, immunoenzymatic tests (ELISA) demonstrated a significantly higher detection rate reaching 18.1% (114/630). Immunoenzymatic tests confirmed all the positive results given by light microscopy and by immunochromatographic tests. The prevalence rate of Giardia intestinalis infections in Polish soldiers deployed to Afghanistan was found to be high. Microscopic methods exhibit low sensitivity and therefore may result in the underestimation of the true parasite prevalence. Immunoenzymatic tests (ELISA) showing a much higher sensitivity in comparison to light microscopy

[Health literacy as an element of the Polish occupational health system].

Science.gov (United States)

Dobras, Maciej

Nowadays it is believed that a comprehensive approach towards one's health requires the development and subsequent mastering of health literacy. Although this term has no Polish equivalent, it applies to the ability of individuals to access, analyze and understand information necessary to make informed health decisions. In this publication it is suggested that 'biegłość zdrowotna' can be used as a corresponding Polish term. This publication is based on the review of the available literature (in Polish and in English) on health literacy. To illustrate the hypothetical level of health literacy among Polish employers and employees reports of the Chief Labour Inspectorate and individual items from the Second European Survey of Enterprises on New and Emerging Risks (ESENER-2) were used. The analysis proves that health literacy is a multidimensional concept which has been studied and investigated so far only in relation to chosen nosological units, but practically it does not appear in relation to occupational health. There are reasons to believe that in Poland the low level of health literacy among both employers and employees, lies at the forefront of a passive approach towards the safeguarding of workers health. The concept of health literacy needs further dissemination in Poland, whereas the main area of future research should be the design of the Polish tool for assessing health literacy. The national system of occupational health seems to offer a possible ground for implementing such a concept, especially bearing in mind that within the current system there are several entities and services, which have the legal mandate to undertake informative and advisory duties - exactly those, which help build and master health literacy skills. Med Pr 2016;67(5):681-689. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Friction Properties of Polished Cvd Diamond Films Sliding against Different Metals

Science.gov (United States)

Lin, Zichao; Sun, Fanghong; Shen, Bin

2016-11-01

Owing to their excellent mechanical and tribological properties, like the well-known extreme hardness, low coefficient of friction and high chemical inertness, chemical vapor deposition (CVD) diamond films have found applications as a hard coating for drawing dies. The surface roughness of the diamond films is one of the most important attributes to the drawing dies. In this paper, the effects of different surface roughnesses on the friction properties of diamond films have been experimentally studied. Diamond films were fabricated using hot filament CVD. The WC-Co (Co 6wt.%) drawing dies were used as substrates. A gas mixture of acetone and hydrogen gas was used as the feedstock gas. The CVD diamond films were polished using mechanical polishing. Polished diamond films with three different surface roughnesses, as well as the unpolished diamond film, were fabricated in order to study the tribological performance between the CVD diamond films and different metals with oil lubrication. The unpolished and polished CVD diamond films are characterized with scanning electron microscope (SEM), atomic force microscope (AFM), surface profilometer, Raman spectrum and X-ray diffraction (XRD). The friction examinations were carried out by using a ball-on-plate type reciprocating friction tester. Low carbide steel, stainless steel, copper and aluminum materials were used as counterpart balls. Based on this study, the results presented the friction coefficients between the polished CVD films and different metals. The friction tests demonstrate that the smooth surface finish of CVD diamond films is beneficial for reducing their friction coefficients. The diamond films exhibit low friction coefficients when slid against the stainless steel balls and low carbide steel ball, lower than that slid against copper ball and aluminum ball, attributed to the higher ductility of copper and aluminum causing larger amount of wear debris adhering to the sliding interface and higher adhesive

Evaluation of the Appearance of Nail Polish Following Daily Treatment of Ex Vivo Human Fingernails With Topical Solutions of Tavaborole or Efinaconazole.

Science.gov (United States)

Vlahovic, Tracey C; Coronado, Dina; Chanda, Sanjay; Merchant, Tejal; Zane, Lee T

2016-01-01

Patients with onychomycosis may mask infected nails with polish. Tavaborole topical solution, 5% is a boron-based, small-molecule pharmaceutical approved for the treatment of toenail onychomycosis caused by Trichophyton rubrum and Trichophyton mentagrophytes; efinaconazole topical solution, 10% is approved for the same indication. Nail polish appearance after application of tavaborole (dropper) or efinaconazole (brush); respective applicator appearance; presence of color transfer from respective applicators; and color transfer to remaining solutions after dosing of polished nails were evaluated. Twelve ex vivo human cadaver fingernails were cleaned, polished with two coats of L'Oréal® Nail Color, Devil Wears Red #420, and mounted on floral foam. Nails were treated with tavaborole or efinaconazole solutions once daily for 7 days. Dropper and brush applicators were applied to white watercolor paper immediately after dosing to evaluate color transfer from polished nails. On day 7, remaining solutions were transferred to clear glass vials to evaluate color transfer from applicators to solutions. Nails, applicators, and papers were photographed daily following application; remaining solutions were photographed after 7 days of dosing. Tavaborole-treated polished nails showed no polish discoloration, and tavaborole applicators did not change in appearance during treatment. No color transfer from polished nails was evident to applicator, paper, or remaining solution. Efinaconazole-treated polished nails showed substantial polish changes after the first day of treatment, with polish appearance and discoloration progressively worsening over 7 days of treatment. Color transfer from nails was evident to applicator, paper, and remaining solution. Daily dropper application of tavaborole to ex vivo polished nails did not alter polish appearance. Brush application of efinaconazole produced visible changes in polish appearance and color transfer to applicators, paper, and

The corpus-driven revolution in Polish Sign Language: the interview with Dr. Paweł Rutkowski

Directory of Open Access Journals (Sweden)

Iztok Kosem

2018-02-01

Full Text Available Dr. Paweł Rutkowski is head of the Section for Sign Linguistics at the University of Warsaw. He is a general linguist and a specialist in the field of syntax of natural languages, carrying out research on Polish Sign Language (polski język migowy — PJM. He has been awarded a number of prizes, grants and scholarships by such institutions as the Foundation for Polish Science, Polish Ministry of Science and Higher Education, National Science Centre, Poland, Polish–U.S. Fulbright Commission, Kosciuszko Foundation and DAAD. Dr. Rutkowski leads the team developing the Corpus of Polish Sign Language and the Corpus-based Dictionary of Polish Sign Language, the first dictionary of this language prepared in compliance with modern lexicographical standards. The dictionary is an open-access publication, available freely at the following address: http://www.slownikpjm.uw.edu.pl/en/. This interview took place at eLex 2017, a biennial conference on electronic lexicography, where Dr. Rutkowski was awarded the Adam Kilgarriff Prize and gave a keynote address entitled Sign language as a challenge to electronic lexicography: The Corpus-based Dictionary of Polish Sign Language and beyond. The interview was conducted by Dr. Victoria Nyst from Leiden University, Faculty of Humanities, and Dr. Iztok Kosem from the University of Ljubljana, Faculty of Arts.

Audit Committee Practice in the Polish Listed Stock Companies. Present Situation and Development Perspectives

Directory of Open Access Journals (Sweden)

Piotr Szczepankowski

2012-06-01

Full Text Available The audit committee is one of the parts of corporate governance mechanism, which is understood as the relationship between corporate managers, directors and the providers of equity, people and institutions who save and invest their capital to earn the return. This study presents survey research results of audit committee activity in Polish public stock companies quoted on the Warsaw Stock Exchange (WSE. The purpose of this paper is to present the audit committee practice in Poland after 2009. The paper shows that the audit committee practice is still the most problematic issue of transitional Polish corporate governance rules. The survey has shown that the corporate needs and its implementation, and communication with listed companies leave a lot of room for improvement. The paper is based on the documents prepared in 2010 by PricewaterhouseCoopers, the Polish Association of Listed Companies and the Polish Institute of Directors.

Global Application of the Assessment of Communication Skills of Paediatric Endocrinology Fellows in the Management of Differences in Sex Development Using the ESPE E-Learning.Org Portal

DEFF Research Database (Denmark)

Kranenburg, Laura J C; Reerds, Sam T H; Cools, Martine

2017-01-01

endocrinology. Guidelines are created for the assessment of communication between health professionals and individuals with DSD and their parents. METHODS: Paediatric endocrinology fellows worldwide were invited to study two interactive online cases (www.espe-elearning.org) and to describe a best practice...... as a separate key item to better reflect the qualitative differences in the replies and for simplicity of use by evaluators. CONCLUSIONS: E-learning can play an important role in assessing communication skills. A practical tool is provided to assess how information is shared with patients with DSD...

Farmers' pensions and the Polish economic crisis.

Science.gov (United States)

Simanis, J G

1983-04-01

The Polish Government, in 1977, inaugurated a new pension program that made old-age and invalidity benefits available for the first time to most farmers in that country. The evolution and eventual failure of that program were closely intertwined with a growing national economic crisis, manifested in widespread popular unrest and culminating in emergence of the Solidarity movement. The farmers' pension program was originally presented as both a social security measure and a vehicle for improving agricultural efficiency. The economic situation was expected to benefit as farms of older owners were passed to younger, presumably more efficient, successors, with the state sometimes acting as intermediary. A further step to bind the social security concept to agricultural efficiency came through relating the pension amount to the quantity of produce the individual farmer sold to the state over a number of years. The failure of these provisions and other unpopular features of the new program was aggravated by inflation and continuing deterioration of the Polish economy.

Fabrication and Characterization of FeNiCr Matrix-TiC Composite for Polishing CVD Diamond Film

Institute of Scientific and Technical Information of China (English)

Zhuji Jin; Zewei Yuan; Renke Kang; Boxian Dong

2009-01-01

Dynamic friction polishing (DFP) is one of the most promising methods appropriate for polishing CVD diamond film with high efficiency and low cost.By this method CVD diamond film is polished through being simply pressed against a metal disc rotating at a high speed utilizing the thermochemical reaction occurring as a result of dynamic friction between them in the atmosphere.However, the relatively soft materials such as stainless steel, cast iron and nickel alloy widely used for polishing CVD diamond film are easy to wear and adhere to diamond film surface, which may further lead to low efficiency and poor polishing quality.In this paper, FeNiCr matrix-TiC composite used as grinding wheel for polishing CVD diamond film was obtained by combination of mechanical alloying (MA) and spark plasma sintering (SPS).The process of ball milling,composition, density, hardness, high-temperature oxidation resistance and wear resistance of the sintered piece were analyzed.The results show that TiC was introduced in MA-SPS process and had good combination with FeNiCr matrix and even distribution in the matrix.The density of composite can be improved by mechanical alloying.The FeNiCr matrix-TiC composite obtained at 1273 K was found to be superior to at 1173 K sintering in hardness, high-temperature oxidation resistance and wearability.These properties are more favorable than SUS304 for the preparation of high-performance grinding wheel for polishing CVD diamond film.

Experimental Evaluation of Optically Polished Aluminum Panels on the Deep Space Network's 34 Meter Antenna

Science.gov (United States)

Vilnrotter, V.

2011-01-01

The potential development of large aperture ground?based "photon bucket" optical receivers for deep space communications has received considerable attention recently. One approach currently under investigation is to polish the aluminum reflector panels of 34?meter microwave antennas to high reflectance, and accept the relatively large spotsize generated by state of?the?art polished aluminum panels. Theoretical analyses of receiving antenna pointing, temporal synchronization and data detection have been addressed in previous papers. Here we describe the experimental effort currently underway at the Deep Space Network (DSN) Goldstone Communications Complex in California, to test and verify these concepts in a realistic operational environment. Two polished aluminum panels (a standard DSN panel polished to high reflectance, and a custom designed aluminum panel with much better surface quality) have been mounted on the 34 meter research antenna at Deep?Space Station 13 (DSS?13), and a remotely controlled CCD camera with a large CCD sensor in a weather?proof container has been installed next to the subreflector, pointed directly at the custom polished panel. The point?spread function (PSF) generated by the Vertex polished panel has been determined to be smaller than the sensor of the CCD camera, hence a detailed picture of the PSF can be obtained every few seconds, and the sensor array data processed to determine the center of the intensity distribution. In addition to estimating the center coordinates, expected communications performance can also been evaluated with the recorded data. The results of preliminary pointing experiments with the Vertex polished panel receiver using the planet Jupiter to simulate the PSF generated by a deep?space optical transmitter are presented and discussed in this paper.

Effect of grinding and polishing on near-surface phase transformations in zirconia

International Nuclear Information System (INIS)

Reed, J.S.; Lejus, A.M.

1977-01-01

The transformation of near-surface material on grinding and polishing has been investigated in sintered zirconia of 1 μm grain size and 99 percent density containing 4.5 and 7.0 mole percent Y 2 O 3 . Rough wet and dry grinding transformed about 20 percent cubic phase into 18 percent tetragonal and 2 percent monoclinic in material initially 47 percent cubic and 53 percent tetragonal (4.5 mole percent Y 2 O 3 ) but no change of phase in material that was fully cubic (7.0 mole percent Y 2 O 3 ). Annealing and polishing reduced lattice strain but only polishing reduced the concentration of monoclinic and tetragonal phases. Microhardness studies indicated that lattice strain and the phase transformations increased the penetration hardness to a depth of about 4 μm

Plaque, gingival bleeding and calculus formation after supragingival scaling with and without polishing: a randomised clinical trial.

Science.gov (United States)

Zanatta, Fabricio Batistin; Pinto, Tatiana Militz; Kantorski, Karla Zanini; Rösing, Cassiano Kuchenbecker

2011-01-01

The aim of this study was to compare the effect of polishing after scaling and root planing on supragingival plaque, calculus formation, and gingival bleeding. The study was designed as a split-mouth randomised clinical trial. Seventy-six patients were submitted to supragingival scaling on the six mandibular anterior teeth with manual curettes until a smooth surface was achieved. Subsequently, quadrants were randomly selected to be polished (test) or not (control) with a rubber cup and pumice. One, two and three weeks following treatment, a blinded examiner evaluated the visible plaque index, gingival bleeding index and the presence of supragingival calculus on the lingual tooth surfaces. The results showed that unpolished surfaces exhibited higher mean percentages of visible plaque in the third week. No statistically significant differences were observed between unpolished and polished sites related to gingival bleeding. Calculus formation was higher on unpolished sites than on polished sites at 2 and 3 weeks. Dental polishing after supragingival scaling contributed to reducing plaque and calculus formation. Polishing exerts an inhibitory effect on plaque and calculus formation.

[Pheochromocytoma in 8-year observation at a single endocrinological center in Wroclaw].

Science.gov (United States)

Bednarek-Tupikowska, Grazyna; Bucyk, Barbara; Daroszewski, Jacek; Bidzińska-Speichert, Bozena; Bohdanowicz-Pawlak, Anna; Szymczak, Jadwiga; Bednorz, Włodzimierz; Podgórski, Franciszek; Zareba-Bogdał, Elzbieta; Kuliczkowska-Płaksej, Justyna; Lenarcik, Agnieszka; Filus, Alicja; Kałuzny, Marcin; Kubicka, Eliza; Syrycka, Joanna; Tupikowska, Małgorzata; Lizurej, Oskar; Bolanowski, Marek; Milewicz, Andrzej

2009-01-01

Pheochromocytoma is rare tumor with a highly variable clinical presentation. This report provides clinical picture, efficiency of diagnostics and treatment of pheochromocytoma in 8-years in the endocrinological center in Wroclaw. The records of 37 patients with pheochromocytoma were identified, who were treated in 2000-2007 in the Department of Endocrinology, Diabetology and Isotope Treatment in Wroclaw. There were 23 women (age 23-75 year) and 14 men (age 17-74). We studied frequency of clinical signs, usefulness of diagnostic methods and efficacy of treatment. The duration of the clinical history ranged from 2 months to 16 years. The most frequent symptoms were: hypertension paroxysmal and constant, palpitations, headache, sweating and anxiety. The most sensitive diagnostic method was increased concentration of urinary metanephrine in 24-hour urine. Computed tomography was the most widely used method for tumor localization. Adrenal pheochromocytoma was detecting by CT in all patients, predominated in right adrenal, in 1 case in urinary bladder. Surgery caused remission of hypertension in 59%, improvement in 26.8%, and no changes in 13.9% of patients. Malignancy was reported in 2 cases, 1 woman died after surgery. MEN 2A occur in 21.6%. The diagnosis of pheochromocytma is usually made after long duration of the disease. The study confirms that clinical presentation of pheochromocytoma is variable and nonspecific, this finding makes the diagnosis very difficult. The most typical symptom is paroxysmal hypertension, which is present only in 40%, other symptoms are nonspecific. The measurement of 24-hour urinary metanephrines was the best indicator. CT was almost always successful in localizing the tumor. Patients with pheochromocytoma should be consider for other endocrine diseases especially medullary carcinoma, primary hyperparathyroidism and other component of MEN 2A.

Exploring the Association between Alzheimer's Disease, Oral Health, Microbial Endocrinology and Nutrition.

Science.gov (United States)

Harding, Alice; Gonder, Ulrike; Robinson, Sarita J; Crean, StJohn; Singhrao, Sim K

2017-01-01

Longitudinal monitoring of patients suggests a causal link between chronic periodontitis and the development of Alzheimer's disease (AD). However, the explanation of how periodontitis can lead to dementia remains unclear. A working hypothesis links extrinsic inflammation as a secondary cause of AD. This hypothesis suggests a compromised oral hygiene leads to a dysbiotic oral microbiome whereby Porphyromonas gingivalis , a keystone periodontal pathogen, with its companion species, orchestrates immune subversion in the host. Brushing and chewing on teeth supported by already injured soft tissues leads to bacteremias. As a result, a persistent systemic inflammatory response develops to periodontal pathogens. The pathogens, and the host's inflammatory response, subsequently lead to the initiation and progression of multiple metabolic and inflammatory co-morbidities, including AD. Insufficient levels of essential micronutrients can lead to microbial dysbiosis through the growth of periodontal pathogens such as demonstrated for P. gingivalis under low hemin bioavailability. An individual's diet also defines the consortium of microbial communities that take up residency in the oral and gastrointestinal (GI) tract microbiomes. Their imbalance can lead to behavioral changes. For example, probiotics enriched in Lactobacillus genus of bacteria, when ingested, exert some anti-inflammatory influence through common host/bacterial neurochemicals, both locally, and through sensory signaling back to the brain. Early life dietary behaviors may cause an imbalance in the host/microbial endocrinology through a dietary intake incompatible with a healthy GI tract microbiome later in life. This imbalance in host/microbial endocrinology may have a lasting impact on mental health. This observation opens up an opportunity to explore the mechanisms, which may underlie the previously detected relationship between diet, oral/GI microbial communities, to anxiety, cognition and sleep patterns

Materials of 46. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical. Volume 1,2,3

International Nuclear Information System (INIS)

2003-01-01

Scientific assemblies of Polish Chemical Society are the most important chemical meetings organised annually in Poland. Basic as well as application studies in all chemical branches have been extensively presented. The next subjects were proposed as scientific sessions and symposia topics: organic chemistry, inorganic chemistry, physical chemistry, analytical chemistry, technology and chemical engineering, polymer chemistry, solid state chemistry, catalysis, biological chemistry, chemistry and technology of coal, environmental protection, didactics of chemistry, history of chemistry, young scientist forum as well as the reports of results of works sponsored by Committee of Scientific Research

An Exploratory Study of the Factors That May Affect Female Consumers’ Buying Decision of Nail Polishes

Directory of Open Access Journals (Sweden)

Chen Sun

2015-06-01

Full Text Available The objective of this study was to determine what factors female consumers valued more when they buy nail polish. Ninety-eight female consumers participated in a nail polish consumer study at the Sensory Analysis Center, Kansas State University. A questionnaire containing a check-all-that-apply (CATA question, behavior questions and demographic questions was presented to each consumer. In the CATA question, the factors that may affect consumers’ decision to buy a nail polish were asked, including both sensory and non-sensory factors. The frequency in percent for the factors was calculated. Sensory appeal, price and convenience of usage were the top factors that affected consumers’ buying decisions. Consumers valued sensory appeal and convenience of usage; this suggested that a nail polish company’s product development and advertising departments may want to focus on these two areas, primarily. The information presented in this study could help a nail polish company understand more about consumer segmentation and advertising strategy.

Polish Foreign Trade: The Quality Catch-up and the Influence of Foreign Direct Investments

DEFF Research Database (Denmark)

Nielsen, Jørgen Ulff-Møller

2000-01-01

This paper investigates how the Polish transition process has expressed itself in export and inward foreign direct investments (FDI), and the relations between export and FDI. Since 1988, the number of Polish products able to compee in export markets has steadily increased. The quality level...

Careers of young Polish chemists

OpenAIRE

Kosmulski, Marek

2014-01-01

Typical young Polish scientist is an alumnus of doctoral studies at the same university and department where he/she completed his/her Master degree. The career is continued by receiving a habilitation at the same university and department. Then a holder of habilitation is promoted to a tenured position at the same university and department. Detailed analysis of scientific careers of 154 recent Ph.D. recipients and of 16 habilitation candidates in chemistry from University of Warsaw is present...

APPROACHES TO STANDARDIZATION OF STUDENTS INFORMATION AND COMMUNICATION COMPETENCE DEVELOPMENT: THE POLISH EXPERIENCE

Directory of Open Access Journals (Sweden)

Mariya P. Leshchenko

2014-09-01

Full Text Available In the article foreign, in particular, the Polish experience of diagnostic of students information and communication competencies is characterized. Foreign scientists focuse their modern searches on identifying students skills of using the Internet. Standards defined by Polish researchers are multifunctional and enable the determination of the cognitive, appraisal, creative and social students skills to function in the network. Structure of seven standards (literate and successful information search, critical evaluation of information, creation, transformation and presentation of information content, legal principles of creation and distribution of information content, empathy and imagemaking, security and privacy; participation in the online communities, their components and related parameters are characterized. General results of Polish scientists researches are presented.

Poland, a workforce in transition: Exploring leadership styles and effectiveness of Polish vs. Western expatriate managers

OpenAIRE

Eisenberg, Jacob; Pieczonka, Artur; Eisenring, Martin; Mironski, Jacek

2015-01-01

Given the cultural differences between Western Europe and Poland, differences are expected in leadership styles and behaviours between Polish and Western managers. Our study explored Polish employees’ perceptions and attitudes toward expatriate Western versus local managers. The main method was surveying Polish employees working under Western managers in three mid-size companies. We supplemented the survey with in-depth interviews with five West European middle managers working in Poland. We ...

Air-powder polishing on self-ligating brackets after clinical use: effects on debris levels.

Science.gov (United States)

Aragón, Mônica L S Castro; Lima, Leandro Santiago; Normando, David

2016-01-01

Debris buildup on brackets and arch surfaces is one of the main factors that can influence the intensity of friction between bracket and orthodontic wire. This study sought to evaluate the effect of air-powder polishing cleaning on debris levels of self-ligating ceramic brackets at the end of orthodontic treatment, compared to the behavior of conventional brackets. Debris levels were evaluated in metal conventional orthodontic brackets (n = 42) and ceramic self-ligating brackets (n = 42) on canines and premolars, arranged in pairs. There were brackets with and without air-powder polishing. At the end of orthodontic treatment, a hemiarch served as control and the contralateral hemiarch underwent prophylaxis with air-powder polishing. Debris buildup in bracket slots was assessed through images, and Wilcoxon test was used to analyze the results. The median debris levels were statistically lower in the conventional metal brackets compared to self-ligating ones (p = 0.02), regarding brackets not submitted to air-powder polishing. Polishing significantly reduced debris buildup to zero in both systems, without differences between groups. Ceramic self-ligating brackets have a higher debris buildup in comparison to conventional metal brackets in vivo, but prophylaxis with sodium bicarbonate jet was effective in reducing debris levels in self-ligating and also in conventional brackets.

Knowledge of chronic total occlusion among Polish interventional cardiologists.

Science.gov (United States)

Bryniarski, Krzysztof L; Zabojszcz, Michał; Dębski, Grzegorz; Marchewka, Jakub; Legutko, Jacek; Surowiec, Sławomir; Siudak, Zbigniew; Żmudka, Krzysztof; Dudek, Dariusz; Bryniarski, Leszek

2015-01-01

Chronic total occlusion (CTO) recanalization is indicated in patients with symptoms and evidence of ischemia, but in most cases those types of lesions are still treated medically. In the last few years CTO angioplasty technique has changed dramatically due to considerable advances in techniques and dedicated equipment. An attempt to assess the state of knowledge of technical aspects of CTO angioplasty of coronary arteries among Polish interventional cardiologists. Questionnaire survey performed during two major Polish invasive cardiology workshops. In the study there participated 113 physicians with an average length of work experience of 13 years, most of them cardiologists certified as independent primary operators. The majority of respondents recognized the need of prevention of thrombotic complications through control of activated coagulation time during the CTO procedures. Prevention of renal complications and X-ray protection are also recognized as a significant part of the procedures. The benefits from the use of over-the-wire microcatheters and balloons, the proper choice of dedicated guidewires, contralateral injections and retrograde technique are underestimated. Despite satisfactory knowledge about indications and qualification for the CTO procedure, the awareness of procedural aspects (particularly the retrograde technique) as well as the dedicated CTO equipment among Polish interventional cardiologists is still insufficient.

Density determination of nail polishes and paint chips using magnetic levitation

Science.gov (United States)

Huang, Peggy P.

Trace evidence is often small, easily overlooked, and difficult to analyze. This study describes a nondestructive method to separate and accurately determine the density of trace evidence samples, specifically nail polish and paint chip using magnetic levitation (MagLev). By determining the levitation height of each sample in the MagLev device, the density of the sample is back extrapolated using a standard density bead linear regression line. The results show that MagLev distinguishes among eight clear nail polishes, including samples from the same manufacturer; separates select colored nail polishes from the same manufacturer; can determine the density range of household paint chips; and shows limited levitation for unknown paint chips. MagLev provides a simple, affordable, and nondestructive means of determining density. The addition of co-solutes to the paramagnetic solution to expand the density range may result in greater discriminatory power and separation and lead to further applications of this technique.

Use of mep HyperCel for polishing of human serum albumin.

Science.gov (United States)

McCann, Karl B; Vucica, Yvonne; Wu, John; Bertolini, Joseph

2014-10-15

The manufacture of human serum albumin by chromatographic procedures involves gel filtration chromatography as a final polishing step. Despite this step being essential to remove high molecular weight impurity proteins and thus ensure a stable and safe final product, it is relatively inefficient. This paper explores the use of hydrophobic charge induction chromatographic media, MEP HyperCel as an alternative to Sephacryl S200HR gel filtration for the polishing of human serum albumin derived by ion exchange chromatographic purification of Cohn Supernatant I. The use of MEP HyperCel results in a product with a higher purity than achieved with gel filtration and in a less time consuming manner and with potential resource savings. MEP HyperCel appears to have great potential for incorporation into downstream processes in the plasma fractionation industry as an efficient means of achieving polishing of intermediates or capture of proteins of interest. Copyright © 2014 Elsevier B.V. All rights reserved.

Plasma electrolytic polishing of metalized carbon fibers

Directory of Open Access Journals (Sweden)

Falko Böttger-Hiller

2016-02-01

Full Text Available Efficient lightweight structures require intelligent materials that meet versatile functions. Especially, carbon-fiber-reinforced polymers (CFRPs are gaining relevance. Their increasing use aims at reducing energy consumption in many applications. CFRPs are generally very light in weight, while at the same time being extremely stiff and strong (specific strength: CFRPs: 1.3 Nm kg–1, steel: 0.27 Nm kg–1; specific stiffness: CFRPs: 100 Nm kg–1, steel: 25 Nm kg–1. To increase performance and especially functionality of CFRPs, the integration of microelectronic components into CFRP parts is aspired. The functionalization by sensors, actuators and electronics can enable a high lightweight factor and a new level of failure-safety. The integration of microelectronic components for this purpose requires a working procedure to provide electrical contacts for a reliable connection to energy supply and data interfaces. To overcome this challenge, metalized carbon fibers are used. Metalized fibers are, similar to the usual reinforcing fibers, able to be soldered and therefore easy to incorporate into CFRPs. Unfortunately, metalized fibers have to be pre-treated by flux-agents. Until now, there is no flux which is suitable for mass production without destroying the polymer of the CFRP. The process of plasma electrolytic polishing (PeP could be an option, but is so far not available for copper. Thus, in this study, plasma electrolytic polishing is transferred to copper and its alloys. To achieve this, electrolytic parameters as well as the electrical setup are adapted. It can be observed that the gloss and roughness can be adjusted by means of this procedure. Finally, plasma electrolytic polishing is used to treat thin copper layers on carbon fibers.

The beginnings of the reception of Ludwik Fleck’s ideas in Polish (1936-1989

Directory of Open Access Journals (Sweden)

Paweł Jarnicki

2016-12-01

Full Text Available The article discusses the beginnings of the reception of Ludwik Fleck’s theory of thought styles and thought collectives in Polish, from his first polemics with Izydora Dąmbska in 1936 to the first edition of the Polish translation of Entstehung und Entwicklung

Tax harmonization of UCI – opportunities and threats for EU and Polish entities since 2011

Directory of Open Access Journals (Sweden)

Rafał Płókarz

2011-12-01

Full Text Available The article presents the new tax and legal framework for Polish and international undertakings for collective investments (UCI that came into force in January 2011. Prior to 2011, there were some tax obstacles within the Polish tax system that made competitive advantage in favor of domestic UCIs, and therefore were not in line with European regulations. The tax harmonization voted at the end of 2010 by Polish Parliament lifted those barriers, but at the same time gave birth to new threats and opportunities.

Chromatic stability of acrylic resins of artificial eyes submitted to accelerated aging and polishing.

Science.gov (United States)

Goiato, Marcelo Coelho; Santos, Daniela Micheline dos; Souza, Josiene Firmino; Moreno, Amália; Pesqueira, Aldiéris Alves

2010-12-01

Esthetics and durability of materials used to fabricate artificial eyes has been an important issue since artificial eyes are essential to restore esthetics and function, protect the remaining tissues and help with patients' psychological therapy. However, these materials are submitted to degrading effects of environmental agents on the physical properties of the acrylic resin. This study assessed the color stability of acrylic resins used to fabricate sclera in three basic shades (N1, N2 and N3) when subjected to accelerated aging, mechanical and chemical polishing. Specimens of each resin were fabricated and submitted to mechanical and chemical polishing. Chromatic analysis was performed before and after accelerated aging through ultraviolet reflection spectrophotometry. All specimens revealed color alteration following polishing and accelerated aging. The resins presented statistically significant chromatic alteration (p<0.01) between the periods of 252 and 1008 h. Both polishing methods presented no significant difference between the values of color derivatives of resins.

Tracking Performance of Upgraded "Polished Panel" Optical Receiver on NASA's 34 Meter Research Antenna

Science.gov (United States)

Vilnrotter, Victor

2013-01-01

There has been considerable interest in developing and demonstrating a hybrid "polished panel" optical receiver concept that would replace the microwave panels on the Deep Space Network's (DSN) 34 meter antennas with highly polished aluminum panels, thus enabling simultaneous opticaland microwave reception. A test setup has been installed on the 34 meter research antenna at DSS-13 (Deep Space Station 13) at NASA's Goldstone Deep Space Communications Complex in California in order to assess the feasibility of this concept. Here we describe the results of a recent effort todramatically reduce the dimensions of the point-spread function (PSF) generated by a custom polished panel, thus enabling improved optical communications performance. The latest results are compared to the previous configuration in terms of quantifiable PSF improvement. In addition, the performance of acquisition and tracking algorithms designed specifically for the polished panel PSF are evaluated and compared, based on data obtained from real-time tracking of planets and bright stars with the 34 meter research antenna at DSS-13.

The determinants of the changes in polish food industry based on the financial results

Directory of Open Access Journals (Sweden)

Malwina Białas

2016-07-01

Full Text Available For the last two decades Polish food sector has undergone significant transformations. It was one of the quickest branch to reborn after the crisis related to the changes of political system in Poland. Since then, it has become an important stimulator of economic growth. Due to  the constant technical, technological and organizational development of the sector, Poland has become one of the leading modern and innovative European food producers. The food industry development contributed to the remarkable export success of Polish businesses. The considerable growth of the sector was triggered by the need for adaptation of Polish companies to the EU standards, as well as joining to the EU structures. The above research paper was created on the basis of the comparative analysis and it summerises the financial results of the financial industry in selected areas, which have been discussed owing to the changes in the functioning of Polish economy.

Employability management practices in the Polish ICT sector

NARCIS (Netherlands)

Marzec, I.; van der Heijden, Beatrice; Scholarios, D.; van der Schoot, E.; Jedrzejowicz, P.; Bozionelos, N.; Epitropaki, O.; Knauth, P.; Mikkelsen, A.; van der Heijde, C.M.

2009-01-01

This article examines current career thinking and employability management practices within the Polish Information and Communication Technology (ICT) sector. The aim of this contribution is to identify career management problems and to determine obstacles for implementing employability management

The influence of polishing techniques on pre-polymerized CAD\\CAM acrylic resin denture bases.

Science.gov (United States)

Alammari, Manal Rahma

2017-10-01

Lately, computer-aided design and computer-aided manufacturing (CAD/CAM) has broadly been successfully employed in dentistry. The CAD/CAM systems have recently become commercially available for fabrication of complete dentures, and are considered as an alternative technique to conventionally processed acrylic resin bases. However, they have not yet been fully investigated. The purpose of this study was to inspect the effects of mechanical polishing and chemical polishing on the surface roughness (Ra) and contact angle (wettability) of heat-cured, auto-cured and CAD/CAM denture base acrylic resins. This study was conducted at the Advanced Dental Research Laboratory Center of King Abdulaziz University from March to June 2017. Three denture base materials were selected: heat cure poly-methylmethacrylate resin, thermoplastic (polyamide resin) and (CAD\\CAM) denture base resin. Sixty specimens were prepared and divided into three groups, twenty in each. Each group was divided according to the polishing techniques into (Mech P) and (Chem P), ten specimens in each; surface roughness and wettability were investigated. Data were analyzed by SPSS version 22, using one-way ANOVA and Pearson coefficient. One-way analysis of variance (ANOVA) and post hoc tests were used for comparing the surface roughness values between three groups which revealed a statistical significant difference between them (p 1 CAD\\CAM denture base material (group III) showed the least mean values (1.08±0.23, 1.39±0.31, Mech P and Chem P respectively). CAD/CAM showed the least contact angle in both polishing methods, which were statistically significant at 5% level (p=0.034 and pCAD\\CAM denture base resin with superior smooth surface compared to chemical polishing. Mechanical polishing is considered the best effective polishing technique. CAD/CAM denture base material should be considered as the material of choice for complete denture construction in the near future, especially for older dental

Polish Adult Reading Test (PART) - construction of Polish test for estimating the level of premorbid intelligence in schizophrenia.

Science.gov (United States)

Karakuła-Juchnowicz, Hanna; Stecka, Mariola

2017-08-29

In view of unavailability in Poland of the standardized methods to measure PIQ, the aim of the work was to develop a Polish test to assess the premorbid level of intelligence - PART(Polish AdultReading Test) and to measureits psychometric properties, such as validity, reliability as well as standardization in the group of schizophrenia patients. The principles of PART construction were based on the idea of popular worldwide National Adult Reading Test by Hazel Nelson. The research comprised a group of 122 subjects (65 schizophrenia patients and 57 healthy people), aged 18-60 years, matched for age and gender. PART appears to be a method with high internal consistency and reliability measured by test-retest, inter-rater reliability, and the method with acceptable diagnostic and prognostic validity. The standardized procedures of PART have been investigated and described. Considering the psychometric values of PART and a short time of its performance, the test may be a useful diagnostic instrument in the assessment of premorbid level of intelligence in a group of schizophrenic patients.

On the Dictionary of Semantic Equivalents in Polish, Bulgarian and Russian"

Directory of Open Access Journals (Sweden)

Wojciech Paweł Sosnowski

2016-12-01

Full Text Available On the Dictionary of Semantic Equivalents in Polish, Bulgarian and Russian Leksykon odpowiedniości semantycznych w języku polskim, bułgarskim i rosyjskim [The Dictionary of Semantic Equivalents in Polish, Bulgarian and Russian] is the first Polish dictionary which compares semantic equivalents in the largest languages of each Slavic subgroup: The West Slavic group (Polish, the South Slavic group (Bulgarian and the East Slavic group (Russian. The content of the dictionary reflects the social processes, changes and trends which have taken place over recent years. The dictionary consists of 5 volumes, with approximately 5000 entries for each language. What sets it apart from other dictionaries is that it ventures beyond the standard vocabulary one might expect from a dictionary of this sort. Leksykon also contains neologisms as well as realogisms - words which do not often have perfect equivalents in other languages because they are so deeply embedded in a nation’s culture. Each entry in the dictionary offers state-of-the-art semantic and syntactic categorisers, developed by Polish experts in Slavic semantics and aspectology. We consider the dictionary to be an innovation in lexicography, because its open structure enables more languages to be added in the future, including non-Slavic languages. Developed with the use of the most recent methodologies available, the dictionary will constitute a sound basis for lexicographic research in the future, in particular for the development of multilingual electronic dictionaries. In the 21st century, we face two great challenges: to make academic research more interdisciplinary and to build an integrated multinational European community. We hope that our dictionary will help address these challenges by promoting multilingualism and facilitating intercultural communication.The primary language of the dictionary is Polish - the largest Slavic language in the European Union. During the Polish

Mathematical modelling of a self-polishing antifouling paint exposed to seawater: A parameter study

DEFF Research Database (Denmark)

Kiil, Søren; Pedersen, M. S.; Dam-Johansen, Kim

2002-01-01

, and to suggest ways of controlling biocide release rates. A case study with an antifouling paint based on the well-known tributyltin self-polishing copolymer system showed that the rate of paint polishing was influenced, to various degrees, by the following parameters: seawater pH and concentration of Na...

A diagnosis of strangeness. Brzozowski’s Anti-Sienkiewicz campaign as a dispute about Polish identity

Directory of Open Access Journals (Sweden)

Krzysztof Fiołek

2016-03-01

Full Text Available This essay discusses the Anti-Sienkiewicz campaign briefly. The affair happened in 1903 in the Warsaw weekly magazine “Głos”, but was written up in many Polish newspapers. Stanisław Brzozowski (1878-1911, the beginning publicist, literary critic and novelist spoke against Sienkiewicz’s famous works. Sienkiewicz’s main novels have been criticised for their conservatism and lack of social progressiveness, although they display great narrative power and contain vivid characterisations in a style full of imagery. The lack of national independence created greater reverence towards national history in 19th century Polish literature. Sienkiewicz felt a close bond with the Polish nobility. Brzozowski tried to put his own philosophy of culture and his concept of the “philosophy of labour” into practice. He spoke as am exponent of Polish modernism and socialism.

Corporate Politics on Polish Millennials

OpenAIRE

Natalia Roślik

2017-01-01

In the very beginning of this particular paper, an author is trying to determine and describe who Millennials actually are. Then, the basis of Millennials definition is analysing corporation’s activity over the past years regarding this age group. The main goal of the thesis is to bring their specific futures out and describe what corporations on Polish job market are doing to encourage them to work in their offices. Especially in Poland within the last years, it is observed that big multinat...

The use of abrasive polishing and laser processing for developing polyurethane surfaces for controlling fibroblast cell behaviour

Energy Technology Data Exchange (ETDEWEB)

Irving, Michael; Murphy, Mark F; Lilley, Francis; French, Paul W; Burton, David R [General Engineering Research Institute, Liverpool John Moores University, Liverpool, L3 3AF (United Kingdom); Dixon, Simon [Biomer Technology LTD, 10 Seymour Court, Tudor Road, Manor Park, Runcorn, Cheshire, WA7 1SY (United Kingdom); Sharp, Martin C [General Engineering Research Institute, Liverpool John Moores University, Liverpool, L3 3AF (United Kingdom)

2017-02-01

Studies have shown that surfaces having micro and nano-scale features can be used to control cell behaviours including; cell proliferation, migration and adhesion. The aim of this work was to compare the use of laser processing and abrasive polishing to develop micro/nano-patterned polyurethane substrates for controlling fibroblast cell adhesion, migration and proliferation. Laser processing in a directional manner resulted in polyurethane surfaces having a ploughed field effect with micron-scale features. In contrast, abrasive polishing in a directional and random manner resulted in polyurethane surfaces having sub-micron scale features orientated in a linear or random manner. Results show that when compared with flat (non-patterned) polymer, both the laser processed and abrasive polished surface having randomly organised features, promoted significantly greater cell adhesion, while also enhancing cell proliferation after 72 h. In contrast, the abrasive polished surface having linear features did not enhance cell adhesion or proliferation when compared to the flat surface. For cell migration, the cells growing on the laser processed and abrasively polished random surface showed decreased levels of migration when compared to the flat surface. This study shows that both abrasive polishing and laser processing can be used to produce surfaces having features on the nano-scale and micron-scale, respectively. Surfaces produced using both techniques can be used to promote fibroblast cell adhesion and proliferation. Thus both methods offer a viable alternative to using lithographic techniques for developing patterned surfaces. In particular, abrasive polishing is an attractive method due to it being a simple, rapid and inexpensive method that can be used to produce surfaces having features on a comparable scale to more expensive, multi-step methods. - Highlights: • Abrasive polishing can generate nano-scratches on stainless steel to cast polymer films for cell

The use of abrasive polishing and laser processing for developing polyurethane surfaces for controlling fibroblast cell behaviour

International Nuclear Information System (INIS)

Irving, Michael; Murphy, Mark F; Lilley, Francis; French, Paul W; Burton, David R; Dixon, Simon; Sharp, Martin C

2017-01-01

Studies have shown that surfaces having micro and nano-scale features can be used to control cell behaviours including; cell proliferation, migration and adhesion. The aim of this work was to compare the use of laser processing and abrasive polishing to develop micro/nano-patterned polyurethane substrates for controlling fibroblast cell adhesion, migration and proliferation. Laser processing in a directional manner resulted in polyurethane surfaces having a ploughed field effect with micron-scale features. In contrast, abrasive polishing in a directional and random manner resulted in polyurethane surfaces having sub-micron scale features orientated in a linear or random manner. Results show that when compared with flat (non-patterned) polymer, both the laser processed and abrasive polished surface having randomly organised features, promoted significantly greater cell adhesion, while also enhancing cell proliferation after 72 h. In contrast, the abrasive polished surface having linear features did not enhance cell adhesion or proliferation when compared to the flat surface. For cell migration, the cells growing on the laser processed and abrasively polished random surface showed decreased levels of migration when compared to the flat surface. This study shows that both abrasive polishing and laser processing can be used to produce surfaces having features on the nano-scale and micron-scale, respectively. Surfaces produced using both techniques can be used to promote fibroblast cell adhesion and proliferation. Thus both methods offer a viable alternative to using lithographic techniques for developing patterned surfaces. In particular, abrasive polishing is an attractive method due to it being a simple, rapid and inexpensive method that can be used to produce surfaces having features on a comparable scale to more expensive, multi-step methods. - Highlights: • Abrasive polishing can generate nano-scratches on stainless steel to cast polymer films for cell

Surface polishing of niobium for superconducting radio frequency (SRF) cavity applications

Energy Technology Data Exchange (ETDEWEB)

Zhao, Liang [College of William and Mary, Williamsburg, VA (United States)

2014-08-01

Niobium cavities are important components in modern particle accelerators based on superconducting radio frequency (SRF) technology. The interior of SRF cavities are cleaned and polished in order to produce high accelerating field and low power dissipation on the cavity wall. Current polishing methods, buffered chemical polishing (BCP) and electro-polishing (EP), have their advantages and limitations. We seek to improve current methods and explore laser polishing (LP) as a greener alternative of chemical methods. The topography and removal rate of BCP at different conditions (duration, temperature, sample orientation, flow rate) was studied with optical microscopy, scanning electron microscopy (SEM), and electron backscatter diffraction (EBSD). Differential etching on different crystal orientations is the main contributor to fine grain niobium BCP topography, with gas evolution playing a secondary role. The surface of single crystal and bi-crystal niobium is smooth even after heavy BCP. The topography of fine grain niobium depends on total removal. The removal rate increases with temperature and surface acid flow rate within the rage of 0~20 °C, with chemical reaction being the possible dominate rate control mechanism. Surface flow helps to regulate temperature and avoid gas accumulation on the surface. The effect of surface flow rate on niobium EP was studied with optical microscopy, atomic force microscopy (AFM), and power spectral density (PSD) analysis. Within the range of 0~3.7 cm/s, no significant difference was found on the removal rate and the macro roughness. Possible improvement on the micro roughness with increased surface flow rate was observed. The effect of fluence and pulse accumulation on niobium topography during LP was studied with optical microscopy, SEM, AFM, and PSD analysis. Polishing on micro scale was achieved within fluence range of 0.57~0.90 J/cm2, with pulse accumulation adjusted accordingly. Larger area treatment was proved possible by

Material removal and surface figure during pad polishing of fused silica

Energy Technology Data Exchange (ETDEWEB)

Suratwala, T I; Feit, M D; Steele, W A

2009-05-04

The material removal and surface figure after ceria pad polishing of fused silica glass have been measured and analyzed as a function of kinematics, loading conditions, and polishing time. Also, the friction at the workpiece/lap interface, the slope of the workpiece relative to the lap plane, and lap viscoelastic properties have been measured and correlated to material removal. The results show that the relative velocity between the workpiece & lap (determined by the kinematics) and the pressure distribution determine the spatial and temporal material removal and hence the final surface figure of the workpiece. In the case where the applied loading and relative velocity distribution over the workpiece are spatially uniform, a significant non-uniform spatial material removal from the workpiece surface is observed. This is due to a non-uniform pressure distribution resulting from: (1) a moment caused by a pivot point and interface friction forces; (2) viscoelastic relaxation of the polyurethane lap; and (3) a physical workpiece/lap interface mismatch. Both the kinematics and these contributions to the pressure distribution are quantitatively described, and then combined to form a spatial and temporal Preston model & code for material removal (called Surface Figure or SurF{copyright}). The surface figure simulations are consistent with the experiment for a wide variety of polishing conditions. This study is an important step towards deterministic full-aperture polishing, which would allow optical glass fabrication to be performed in a more repeatable, less iterative, and hence more economical manner.

Apparatus and method for deterministic control of surface figure during full aperture pad polishing

Science.gov (United States)

Suratwala, Tayyab Ishaq; Feit, Michael Douglas; Steele, William Augustus

2017-10-10

A polishing system configured to polish a lap includes a lap configured to contact a workpiece for polishing the workpiece; and a septum configured to contact the lap. The septum has an aperture formed therein. The radius of the aperture and radius the workpiece are substantially the same. The aperture and the workpiece have centers disposed at substantially the same radial distance from a center of the lap. The aperture is disposed along a first radial direction from the center of the lap, and the workpiece is disposed along a second radial direction from the center of the lap. The first and second radial directions may be opposite directions.

Knowledge Mobilisation in the Polish Education System

Science.gov (United States)

Fazlagic, Jan; Erkol, Arif

2015-01-01

Poland has made substantial progress in improving the quality of its education system in recent years. This paper aims to describe the situation of the Polish education system from a knowledge management perspective and, to some extent, through innovation policies in education. The many challenges, this paper argues, can be tackled only through…

An Exploratory Study of the Factors That May Affect Female Consumers’ Buying Decision of Nail Polishes

OpenAIRE

Sun, Chen; Adhikari, Koushik; Koppel, Kadri

2015-01-01

The objective of this study was to determine what factors female consumers valued more when they buy nail polish. Ninety-eight female consumers participated in a nail polish consumer study at the Sensory Analysis Center, Kansas State University. A questionnaire containing a check-all-that-apply (CATA) question, behavior questions and demographic questions was presented to each consumer. In the CATA question, the factors that may affect consumers’ decision to buy a nail polish were asked, incl...

Fungal Biomass Protein Production from Trichoderma harzianum Using Rice Polishing.

Science.gov (United States)

Ahmed, Sibtain; Mustafa, Ghulam; Arshad, Muhammad; Rajoka, Muhammad Ibrahim

2017-01-01

Industrially important enzymes and microbial biomass proteins have been produced from fungi for more than 50 years. High levels of crude protein as much as 45% are present in fungal biomass with balanced essential amino acids. The aim of this study was to access the potential of Trichoderma harzianum to produce fungal biomass protein from rice polishings. Maximum biomass yield was obtained at 5% (w/v) rice polishings after 72 h of incubation at 28°C at pH 4. Carbon and nitrogen ratio of 20 : 1 gave significantly higher production of fungal biomass protein. The FBP in the 75 L fermenter contained 49.50% crude protein, 32.00% true protein, 19.45% crude fiber, 9.62% ash, 11.5% cellulose content, and 0.325% RNA content. The profile of amino acids of final FBP exhibited that all essential amino acids were present in great quantities. The FBP produced by this fungus has been shown to be of good nutritional value for supplementation to poultry. The results presented in this study have practical implications in that the fungus T. harzianum could be used successfully to produce fungal biomass protein using rice polishings.

A Comparative Analysis of Polish and Czech International New Ventures

Directory of Open Access Journals (Sweden)

Lidia Danik

2016-06-01

Full Text Available The goal of this paper is to compare the characteristics of Polish and Czech companies which follow the Born Global internationalization model. More concretely, the analysis aims to discover the differences or similarities in terms of the internationalization paths of Polish and Czech SMEs in the characteristics of their managers in terms of the so-called “international vision” and in their innovativeness level. The introductory part of article provides a description of this internationalization model and the International New Ventures traits (INV and summarizes the recent studies on this topic conducted in Poland and Czech Republic. In the empirical part, the International New Ventures from the two countries are compared. The Polish sample includes 105 companies which were surveyed with use of computer assisted telephone interviews in autumn 2014. For the Czech Republic, the sample consists of 54 small and medium-sized companies, which were surveyed using the computer assisted web interviews from November 2013 till January 2014. The surveyed companies in both countries fulfilled the definition of Born Globals. Descriptive statistics, cross-tabulation analysis and non-parametric tests are applied to accomplish the goals of the paper.

Effect of finishing and polishing on the color stability of a composite resin immersed in staining solutions

Directory of Open Access Journals (Sweden)

Maiara Justo Polli

2015-01-01

Full Text Available Objective: To evaluate the influence of finishing/polishing methods and staining solutions using different immersion periods on the color stability of a microhybrid composite resin. Materials and Methods: Ninety specimens were fabricated using a stainless steel mold and polyester strips. The samples were randomly divided into five groups according to the finishing and polishing performed: Control group (no surface treatment was performed, Diamond Pro group, Diamond burs group, Enhance group, and SiC paper group. After finishing and polishing, six samples from each group were immersed in coffee, red wine, or water for 30 days. The color measurements were obtained using digital photography before immersion and after 7, 15, and 30 days of immersion. The red, green, and blue values provided by the Adobe Photoshop software were converted into CIELab values. A three-way analysis of variance and Tukey's test were used for statistical analysis (P ≤ 0.05. Results: The finishing and polishing methods, staining solutions, immersion times, and their interaction had statistically significant effects on the color change (P = 0.00. Coffee and red wine caused intense staining. Among the polishing methods, the highest color change value was observed in the control group (P < 0.05 and the Diamond Pro disks provided the most stain-resistant surfaces (P ≤ 0.05. Conclusion: The finishing and polishing method, staining solution, and immersion time influences the color stability. Finishing and polishing should be applied to obtain a more stain-resistant surface.

Measurement of surface roughness changes of unpolished and polished enamel following erosion.

Directory of Open Access Journals (Sweden)

Francesca Mullan

Full Text Available To determine if Sa roughness data from measuring one central location of unpolished and polished enamel were representative of the overall surfaces before and after erosion.Twenty human enamel sections (4x4 mm were embedded in bis-acryl composite and randomised to either a native or polishing enamel preparation protocol. Enamel samples were subjected to an acid challenge (15 minutes 100 mL orange juice, pH 3.2, titratable acidity 41.3mmol OH/L, 62.5 rpm agitation, repeated for three cycles. Median (IQR surface roughness [Sa] was measured at baseline and after erosion from both a centralised cluster and four peripheral clusters. Within each cluster, five smaller areas (0.04 mm2 provided the Sa roughness data.For both unpolished and polished enamel samples there were no significant differences between measuring one central cluster or four peripheral clusters, before and after erosion. For unpolished enamel the single central cluster had a median (IQR Sa roughness of 1.45 (2.58 μm and the four peripheral clusters had a median (IQR of 1.32 (4.86 μm before erosion; after erosion there were statistically significant reductions to 0.38 (0.35 μm and 0.34 (0.49 μm respectively (p<0.0001. Polished enamel had a median (IQR Sa roughness 0.04 (0.17 μm for the single central cluster and 0.05 (0.15 μm for the four peripheral clusters which statistically significantly increased after erosion to 0.27 (0.08 μm for both (p<0.0001.Measuring one central cluster of unpolished and polished enamel was representative of the overall enamel surface roughness, before and after erosion.

VERSHINA – A POLISH VILLAGE IN SIBERIA. FACTORS INFLUENCING LANGUAGE MAINTENANCE UNDER CHANGING SOCIAL, CULTURAL, ECONOMIC AND POLITICAL CONDITIONS

Directory of Open Access Journals (Sweden)

Michał Głuszkowski

2011-01-01

Full Text Available The article discusses factors influencing language maintenance under changing social, cultural, economic and political conditions of Polish minority in Siberia. The village of Vershina was founded in 1910 by Polish voluntary settlers from Little Poland.During its first three decades Vershina preserved Polish language,traditions, farming methods and machines and also the Roman Catholic religion. The changes came to a village in taiga in the1930s. Vershina lost its ethnocultural homogeneity because of Russian and Buryat workers in the local kolkhoz. Nowadays the inhabitants of Vershina regained their minority rights: religious, educational and cultural. However, during the years of sovietization and ateization, their culture and customs became much more similar to other Siberian villages. Polish language in Vershina is under strong influence of Russian, which is the language of education,administration, and surrounding villages. Children from Polish-Russian families become monolingual and use Polish very rare, only asa school subject and in contacts with grandparents. The process of abandoning mother tongue in Vershina is growing rapidly. However,there are some factors which may hinder the actual changes:the activity of local Polish organisations and Roman Catholic parish as well as folk group “Jazhumbek”.

The attractiveness of family medicine among Polish medical students.

Science.gov (United States)

Gowin, Ewelina; Horst-Sikorska, Wanda; Michalak, Michał; Avonts, Dirk; Buczkowski, Krzysztof; Lukas, Witold; Korman, Tomasz; Litwiejko, Alicja; Chlabicz, Sławomir

2014-06-01

In many developed countries tuning supply and demand of medical doctors is a continuous challenge to meet the ever changing needs of community and individual patients. The long study period for medical doctors creates the opportunity to observe the current career preferences of medical students and evolution in time. To investigate the career choices of Polish students in different stages of their medical education. Medical students at five Polish medical universities were questioned about their career aspirations in the first, third and sixth year. A total of 2020 students were recruited for the survey. Among first year students 17% preferred family medicine as final career option, compared to 20% in the third year, and 30% in the sixth year (significant trend, P family medicine: 71% women versus 62% women in the group with a preference for a non-family medicine orientation (P = 0.008). Medical students rejecting a career as a family doctor stated that the impossibility to work in a hospital environment was the determining factor. The opportunity for professional development seems to be an important determining factor in the choice of a medical specialty in Poland. The proportion of Polish students choosing family medicine increases during their progress in medical education, with one third of students interested in a career in family medicine by year six.

Identification of The First Limiting Amino Acid In Cooked Polished White Rice Fed To Weanling Holtzman Rats

Directory of Open Access Journals (Sweden)

Mellova Masrizal

2010-10-01

Full Text Available Forty-eight male weanling rats (91 g were utilized to study the nutritional adequacy of cooked polished white rice. Rats were individually housed, and allowed ad libitum access to one of six treatment diets. Treatment diets were 1 polished white rice plus 10% casein and 0.18% methionine, CAS, 2 polished white rice, WHR, 3 polished white rice plus 0.45% lysine, LYS, 4 polished white rice plus0.40% methionine, MET, 5 polished white rice plus 0.30% threonine, THR, 6 polished white rice plus 0.45% lysine, 0.40% methionine, and 0.40% threonine, COM. Rice was cooked prior diet formulation using a 3 to 1 ratio of water to rice. Vitamins (AIN-76 and AIN minerals were added to all diets to meet NRC (1978 requirements. Rats fed CAS diets were significantly heavier on d 21 (P<0.05 than rats on COM, LYS, MET, THR, or WHR diets, (219.9 vs. 171.6, 153.2, 153.2, 148.3, or 155.4 g respectively. Supplementation of the most deficient essential amino acids, lysine (LYS or methionine (MET did not improve (P>0.05 rat performance over WHR fed rats, Average daily gain (ADG for CAS was 6.1 g/d and ADG for LYS and MET was 3.0 g/d. The addition of threonine (THR significantly (P<0.05 reduced ADG when compared to WHR diets (2.7 vs. 3.0 g/d. When rats were fed to COM diet significant (P<0.05 improvement in ADG was observed compared to WHR fed rats (4.8 vs. 3.0 g/d. The increased gains achieved with COM diet and the poor gains observed with the single amino acid diets (LYS, MET, or THR would suggest that polished white rice is limiting in more than one essential amino acid.

Interprofessional Collaboration with Immune Checkpoint Inhibitor Therapy: the Roles of Gastroenterology, Endocrinology and Neurology.

Science.gov (United States)

Seery, Virginia

2017-11-01

To discuss immune checkpoint inhibitor therapy and identify opportunities for interprofessional collaboration in the management of toxicities in the areas of gastroenterology, endocrinology, and neurology. Published research and education articles in oncology, nursing, and various specialties. The use of immune checkpoint inhibitors is expanding; timely management of toxicity is critical for positive patient outcomes. There are many opportunities for interprofessional collaboration in the diagnosis and treatment of immune-related adverse events. Nurses play key roles in recognizing immune-related adverse events, providing patient education, and helping to facilitate interprofessional collaboration. Copyright © 2017 Elsevier Inc. All rights reserved.

Understanding the creation of & reducing surface microroughness during polishing & post-processing of glass optics

Energy Technology Data Exchange (ETDEWEB)

Suratwala, Tayyab [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-09-22

In the follow study, we have developed a detailed understanding of the chemical and mechanical microscopic interactions that occur during polishing affecting the resulting surface microroughness of the workpiece. Through targeted experiments and modeling, the quantitative relationships of many important polishing parameters & characteristics affecting surface microroughness have been determined. These behaviors and phenomena have been described by a number of models including: (a) the Ensemble Hertzian Multi Gap (EHMG) model used to predict the removal rate and roughness at atomic force microscope (AFM) scale lengths as a function of various polishing parameters, (b) the Island Distribution Gap (IDG) model used to predict the roughness at larger scale lengths, (c) the Deraguin-Verwey-Landau-Overbeek (DLVO) 3-body electrostatic colloidal model used to predict the interaction of slurry particles at the interface and roughness behavior as a function of pH, and (d) a diffusion/chemical reaction rate model of the incorporation of impurities species into the polishing surface layer (called the Bielby layer). Based on this improved understanding, novel strategies to polish the workpiece have been developed simultaneously leading to both ultrasmooth surfaces and high material removal rates. Some of these strategies include: (a) use of narrow PSD slurries, (b) a novel diamond conditioning recipe of the lap to increase the active contact area between the workpiece and lap without destroying its surface figure, (c) proper control of pH for a given glass type to allow for a uniform distribution of slurry particles at the interface, and (d) increase in applied load just up to the transition between molecular to plastic removal regime for a single slurry particle. These techniques have been incorporated into a previously developed finishing process called Convergent Polishing leading to not just economical finishing process with improved surface figure control, but also

Food additives used in meat processing according to the Polish and European Union legislation.

Science.gov (United States)

Uradziński, J; Weiner, M

2003-01-01

This paper presents the legal regulations related to the use of food additives in meat production in Poland and the European Union. The Polish legal definition of food additives is given as well as the classification of permitted food additives added to food and stimulants by their technological function. In addition, a definition of processing aids in the food industry is included. It shows that Polish legislation includes food additives used to ensure or improve food nutritional value, whereas in the EU legislation, these substances are not included in the list of food additives. Moreover, the Council Directives include food additive specific purity criteria, whereas the Polish regulations do not mention the legal regulations of this issue in practice. The European Union use mechanisms and procedures for the introduction of new food additives into internal markets as well as controlling the circulation of additives. The Polish legislation in practice, however, does not determine approval or methods for the introduction of new food additives to the market. Legal regulations on the monitoring of food additives no exist.

Mutual Fund Performances of Polish Domestic Equity Fund Managers

Directory of Open Access Journals (Sweden)

ömer faruk tan

2015-10-01

Full Text Available Purpose of the article: The main purpose of the paper is empirically evaluating selectivity skills and market timing ability of Polish fund managers during the period from January 2009 to November 2014. After the global financial crisis of 2008, in this period of quantitative easing (QE, thanks to an increase in the money supply, a capital flow from developed countries to developing countries was observed. In this study, we try to analyse that although the financial market in Poland made an incredible progress, whether fund managers show better or worse performance than the market. Methodology/Methods: In order to evaluate fund manager performances, Jensen alpha (1968 is computed, which depicts selectivity skills of fund managers. For determining market timing ability of fund managers, Treynor & Mazuy (1966 regression analysis and Henriksson & Merton (1981 regression analysis are applied. Fund performances are evaluated using Warsaw Stock Exchange Index as the benchmark index. Scientific aim: In this study, we have tried to evaluate selectivity skills and market timing ability of Polish fund managers. A total of 14 equity fund managers’ performances are analysed. The study can be guiding especially for investors who are interested in Polish equity fund performances in a period where emerging stock markets outperformed with quantitative easing. Findings: Jensen (1968 alphas indicate that over this period fund managers did not have selective ability, as none of the 14 funds had statistically significant positive alphas. Furthermore, Treynor & Mazuy (1966 and Henriksson & Merton (1981 regression analysis indicate that over the same period fund managers did not also have market timing ability, as again none of the 14 funds had statistically significant positive coefficients. Conclusions: In this work, we can detect that in the era of quantitative easing, although the financial market in Poland made an incredible progress, the fund returns were

Theorizing Polish migration across Europe: perspectives, concepts, and methodologies

Directory of Open Access Journals (Sweden)

Elżbieta M. Goździak

2016-08-01

Full Text Available Theorizing Polish migration across Europe: perspectives, concepts, and methodologies With the focus on the post-2004 mobility of Polish citizens, in this article we discuss two interrelated questions; namely, what are the most productive ways to theorize contemporary Polish migration, and what are the most fruitful methodologies aimed at understanding Polish migration and Poles on the move? In the first part of this article we unpack three interrelated theoretical frameworks: ‘liquid migration’, ‘regimes of mobility,’ and ‘transnationalism’. The methodological discussion in the second part of the article focuses mainly on outlining and contextualizing the most common approaches to migration phenomena. By critically introducing quantitative and qualitative methodologies, we explore and indicate the advantages of the ethnographic perspective and the merits and predicaments of research engagement in multiple sites.   Polskie migracje w Europie: perspektywy, koncepcje, metodologie Z naciskiem na mobilność obywateli polskich po przyłączeniu Polski do Unii Europejskiej w 2004 roku, w niniejszym artykule staramy się odpowiedzieć na dwa powiązane ze sobą pytania: jakie są najbardziej wydajne sposoby teoretyzowania współczesnej migracji polskiej oraz jakie są najbardziej owocne metody badawcze mające na celu zrozumienie polskiej migracji po akcesji do UE? W pierwszej części artykułu przedstawiamy więc trzy powiązane ze sobą koncepcje teoretyczne: „płynna migracja”, „reżimy mobilności” oraz transnarodowość. Dyskusja metodologiczna w drugiej części artykułu skupia się natomiast głównie na przedstawieniu najczęściej stosowanej metodyki i metodologii w badaniach zjawisk migracyjnych. Wprowadzając krytyczną perspektywę na temat ilościowych i jakościowych metod badawczych, staramy się wskazać wartość poznawczą perspektywy etnograficznej oraz wady i zalety etnograficznego zaangażowania badawczego w

Violation of interest-rate parity: a Polish example

Science.gov (United States)

Przystawa, Jerzy; Wolf, Marek

2000-09-01

The mechanism of the so-called “Bagsik Oscillator” is presented and discussed. In essence, it is a repeated exploitation of arbitrage opportunities that resulted from a marked departure from the interest-rate parity relationship between the local Polish currency and the western currencies.

Il futurismo polacco nella critica letteraria dell’epoca [Polish Futurism in Literary Criticism of the Early Twentieth Century

Directory of Open Access Journals (Sweden)

Andrea F. De Carlo

2016-12-01

Full Text Available The article analyses the critical voices raised against the young poets and artists who promoted Futurism in Poland during the first half of the Twentieth century. Futurist manifestos influenced the new Polish poetry, stimulating a lively debate among intellectuals of the calibre of Stefan Żeromski and Karol Irzykowski. In general, the coeval criticism of Polish Futurism focused on three main points: the lack of originality and servile imitation of foreign literary models; the repudiation of the past and national traditions; Futurism as an expression of ideologies such as Fascism in Italy and Bolshevism in Russia. In this article, specific attention is devoted to an analysis of the essay Snobizm i postęp (Snobbery and Progress, 1923 by Żeromski. The writer, criticising Polish imitators of Russian Futurism, affirmed that Polish literature and culture, in the context of national reconstruction after three partitions of Poland, needed to maintain its natural connection with the past and at the same time, without losing its national nature, to weave some universal suggestions into the plot of purely Polish themes. The goal of this article is to reveal that Żeromski and Irzykowski’s critical stance towards the Polish Futurists, which influenced the critics of the next generation, was dictated by a shallow analysis of Futuristic works and by their inability to understand Futuristic efforts to modernise Polish art and literature.

POLYMORPHISM OF PROLACTIN RECEPTOR GENE (PRLR IN THE POLISH LANDRACE AND POLISH LARGE WHITE SWINE POPULATION AND REPRODUCTIVE TRAITS

Directory of Open Access Journals (Sweden)

AGATA ZIÓŁKOWSKA

2011-01-01

Full Text Available Prolactin receptor gene was found in pig chromosome 16, and it is one of the genes with a significant effect on reproduction traits in sows. The objective of the research was to determine polymorphism of the prolactin receptor gene in pigs of two maternal breeds: Polish Landrace and Polish Large White, as well as analyse relations between particular allelomorphic variants, and reproduction traits of examined sows. Two PRLR gene alleles, A and B, were isolated, they were obtained after AluI restriction gene digestion of the PCR product with the length of 163 bp; furthermore, three genotypes were identified: PRLRAA – 85, 59, 19 bp; PRLRAB – 104, 85, 59, 19 bp; PRLRBB – 104, 59 bp. We assessed 122 sows, in terms of their age at the first farrowing, as well as the sizes of the two subsequent litters. No statistically significant differences were found in the examined reproduction traits in sows with different allelomorphic relations, both within each breed and between breeds. Obtained results indicate that it is necessary to conduct further research on a larger animal group.

AMERICAN ASSOCIATION OF CLINICAL ENDOCRINOLOGISTS, AMERICAN COLLEGE OF ENDOCRINOLOGY, AND ASSOCIAZIONE MEDICI ENDOCRINOLOGI MEDICAL GUIDELINES FOR CLINICAL PRACTICE FOR THE DIAGNOSIS AND MANAGEMENT OF THYROID NODULES--2016 UPDATE.

Science.gov (United States)

Gharib, Hossein; Papini, Enrico; Garber, Jeffrey R; Duick, Daniel S; Harrell, R Mack; Hegedüs, Laszlo; Paschke, Ralf; Valcavi, Roberto; Vitti, Paolo

2016-05-01

malignant or suspicious nodules. The present document updates previous guidelines released in 2006 and 2010 by the American Association of Clinical Endocrinologists (AACE), American College of Endocrinology (ACE) and Associazione Medici Endocrinologi (AME).

Effect of Two Polishing Systems on Surface Roughness, Topography, and Flexural Strength of a Monolithic Lithium Disilicate Ceramic.

Science.gov (United States)

Mohammadibassir, Mahshid; Rezvani, Mohammad Bagher; Golzari, Hossein; Moravej Salehi, Elham; Fahimi, Mohammad Amin; Kharazi Fard, Mohammad Javad

2017-03-08

To evaluate the effect of overglazing and two polishing procedures on flexural strength and quality and quantity of surface roughness of a monolithic lithium disilicate ceramic computer-aided design (CAD) after grinding. This in vitro study was conducted on 52 partially crystalized bar-shaped specimens (16 × 4 × 1.6 mm) of monolithic lithium disilicate ceramic. The specimens were wet polished with 600-, 800-, and 1200-grit silicon carbide papers for 15 seconds using a grinding/polishing machine at a speed of 300 rpm. Then, the specimens were crystalized and glaze-fired in one step simultaneously and randomly divided into four groups of 13: (I) Glazing group (control); (II) Grinding-glazing group, subjected to grinding with red band finishing diamond bur (46 μm) followed by glazing; (III) Grinding-D+Z group, subjected to grinding and then polishing by coarse, medium, and fine diamond rubber points (D+Z); and (IV) Grinding-OptraFine group, subjected to grinding and then polishing with a two-step diamond rubber polishing system followed by a final polishing step with an OptraFine HP brush and diamond polishing paste. The surface roughness (Ra and Rz) values (μm) were measured by a profilometer, and the mean values were compared using one-way ANOVA and Tamhane's test (post hoc comparison). One specimen of each group was evaluated under a scanning electron microscope (SEM) for surface topography. The three-point flexural strength values of the bars were measured using a universal testing machine at a 0.5 mm/min crosshead speed and recorded. The data were analyzed using one-way ANOVA and Tamhane's test (α = 0.05). Statistically significant differences were noted among the experimental groups for Ra, Rz (p SEM analysis of polished surfaces revealed regular morphology with some striations. The OptraFine system created smoother and more uniform surfaces in terms of quantity (p < 0.03 for Ra, p < 0.01 for Rz) and quality of roughness compared to glazing. The flexural

Interpretation of Ukrainian and Polish Adverbial Word Equivalents Form and Meaning Interaction in National Explanatory Lexicography

Directory of Open Access Journals (Sweden)

Alla Luchyk

2015-06-01

Full Text Available Interpretation of Ukrainian and Polish Adverbial Word Equivalents Form and Meaning Interaction in National Explanatory Lexicography The article proves the necessity and possibility of compiling dictionaries with intermediate existence status glossary units, to which the word equivalents belong. In order to form the Ukrainian-Polish dictionary glossary of this type the form and meaning analysis of Ukrainian and Polish word equivalents is done, the common and distinctive features of these language system elements are described, the compiling principles of such dictionary are clarified.

Evaluation of the effect of different methods of microabrasion and polishing on surface roughness of dental enamel.

Science.gov (United States)

Bertoldo, Carlos; Lima, Debora; Fragoso, Larissa; Ambrosano, Glaucia; Aguiar, Flavio; Lovadino, Jose

2014-01-01

The microabrasion technique of enamel consists of selectively abrading the discolored areas or causing superficial structural changes in a selective way. In microabrasion technique, abrasive products associated with acids are used, and the evaluation of enamel roughness after this treatment, as well as surface polishing, is necessary. This in-vitro study evaluated the enamel roughness after microabrasion, followed by different polishing techniques. Roughness analyses were performed before microabrasion (L1), after microabrasion (L2), and after polishing (L3).Thus, 60 bovine incisive teeth divided into two groups were selected (n=30): G1- 37% phosphoric acid (37%) (Dentsply) and pumice; G2- hydrochloric acid (6.6%) associated with silicon carbide (Opalustre - Ultradent). Thereafter, the groups were divided into three sub-groups (n=10), according to the system of polishing: A - Fine and superfine granulation aluminum oxide discs (SofLex 3M); B - Diamond Paste (FGM) associated with felt discs (FGM); C - Silicone tips (Enhance - Dentsply). A PROC MIXED procedure was applied after data exploratory analysis, as well as the Tukey-Kramer test (5%). No statistical differences were found between G1 and G2 groups. L2 differed statistically from L1 and showed superior amounts of roughness. Differences in the amounts of post-polishing roughness for specific groups (1A, 2B, and 1C) arose, which demonstrated less roughness in L3 and differed statistically from L2 in the polishing system. All products increased enamel roughness, and the effectiveness of the polishing systems was dependent upon the abrasive used.

Color stability of bulk-fill and incremental-fill resin-based composites polished with aluminum-oxide impregnated disks

Directory of Open Access Journals (Sweden)

Uzay Koc-Vural

2017-05-01

Full Text Available Objectives This study aimed to evaluate the color stability of bulk-fill and nanohybrid resin-based composites polished with 3 different, multistep, aluminum-oxide impregnated finishing and polishing disks. Materials and Methods Disk-shaped specimens (8 mm in diameter and 4 mm in thickness were light-cured between two glass slabs using one nanohybid bulk-fill (Tetric EvoCeram, Ivoclar Vivadent, one micro-hybrid bulk-fill (Quixfil, Dentsply, and two nanohybrid incremental-fill (Filtek Ultimate, 3M ESPE; Herculite XRV Ultra, Kerr resin-based composites, and aged by thermocycling (between 5 - 55℃, 3,000 cycles. Then, they were divided into subgroups according to the polishing procedure as SwissFlex (Coltène/Whaledent, Optidisc (Kerr, and Praxis TDV (TDV Dental (n = 12 per subgroup. One surface of each specimen was left unpolished. All specimens were immersed in coffee solution at 37℃. The color differences (ΔE were measured after 1 and 7 days of storage using a colorimeter based on CIE Lab system. The data were analyzed by univariate ANOVA, Mann-Whitney U test, and Friedmann tests (α = 0.05. Results Univariate ANOVA detected significant interactions between polishing procedure and composite resin and polishing procedure and storage time (p 0.05. Polishing reduced the discoloration resistance of Tetric EvoCeram/SwissFlex, Tetric EvoCeram/Praxis TDV, Quixfil-SwissFlex, and all Herculite XRV Ultra groups after 7 days storage (p < 0.05. Conclusions Discoloration resistance of bulk-fill resin-based composites can be significantly affected by the polishing procedures.

The Minister Council decree about conditions for to bring into the Polish customs area, to take away from the Polish customs area, and to transit through this area nuclear materials, radioactive sources and device including such sources

International Nuclear Information System (INIS)

Miller, L.

2002-01-01

The decree refers to conditions for to bring into the Polish customs area, to take away from the Polish customs area, and to transit through this area nuclear materials, radioactive sources and devices containing such sources

Comparative study of performance of shoe polishes formulated from ...

African Journals Online (AJOL)

GARZALI

1Department of Pure and Industrial Chemistry, Bayero University, Kano. 2College of Science ... carbon black pigment. Polyethylene polish like the one formulated using carbon black pigment was ... into fine black powder. Purification of Wax.

AMERICAN ASSOCIATION OF CLINICAL ENDOCRINOLOGISTS AND AMERICAN COLLEGE OF ENDOCRINOLOGY POSITION STATEMENT ON THE ASSOCIATION OF SGLT-2 INHIBITORS AND DIABETIC KETOACIDOSIS.

Science.gov (United States)

Handelsman, Yehuda; Henry, Robert R; Bloomgarden, Zachary T; Dagogo-Jack, Sam; DeFronzo, Ralph A; Einhorn, Daniel; Ferrannini, Ele; Fonseca, Vivian A; Garber, Alan J; Grunberger, George; LeRoith, Derek; Umpierrez, Guillermo E; Weir, Matthew R

2016-06-01

AACE = American Association of Clinical Endocrinologists ACE = American College of Endocrinology DKA = diabetic ketoacidosis EMA = European Medicines Agency FDA = U.S. Food and Drug Administration SGLT-2 = sodium glucosecotransporter 2 T1D = type 1 diabetes T2D = type 2 diabetes.

Exploring the Association between Alzheimer’s Disease, Oral Health, Microbial Endocrinology and Nutrition

Science.gov (United States)

Harding, Alice; Gonder, Ulrike; Robinson, Sarita J.; Crean, StJohn; Singhrao, Sim K.

2017-01-01

Longitudinal monitoring of patients suggests a causal link between chronic periodontitis and the development of Alzheimer’s disease (AD). However, the explanation of how periodontitis can lead to dementia remains unclear. A working hypothesis links extrinsic inflammation as a secondary cause of AD. This hypothesis suggests a compromised oral hygiene leads to a dysbiotic oral microbiome whereby Porphyromonas gingivalis, a keystone periodontal pathogen, with its companion species, orchestrates immune subversion in the host. Brushing and chewing on teeth supported by already injured soft tissues leads to bacteremias. As a result, a persistent systemic inflammatory response develops to periodontal pathogens. The pathogens, and the host’s inflammatory response, subsequently lead to the initiation and progression of multiple metabolic and inflammatory co-morbidities, including AD. Insufficient levels of essential micronutrients can lead to microbial dysbiosis through the growth of periodontal pathogens such as demonstrated for P. gingivalis under low hemin bioavailability. An individual’s diet also defines the consortium of microbial communities that take up residency in the oral and gastrointestinal (GI) tract microbiomes. Their imbalance can lead to behavioral changes. For example, probiotics enriched in Lactobacillus genus of bacteria, when ingested, exert some anti-inflammatory influence through common host/bacterial neurochemicals, both locally, and through sensory signaling back to the brain. Early life dietary behaviors may cause an imbalance in the host/microbial endocrinology through a dietary intake incompatible with a healthy GI tract microbiome later in life. This imbalance in host/microbial endocrinology may have a lasting impact on mental health. This observation opens up an opportunity to explore the mechanisms, which may underlie the previously detected relationship between diet, oral/GI microbial communities, to anxiety, cognition and sleep

Exploring the Association between Alzheimer’s Disease, Oral Health, Microbial Endocrinology and Nutrition

Directory of Open Access Journals (Sweden)

Alice Harding

2017-12-01

Full Text Available Longitudinal monitoring of patients suggests a causal link between chronic periodontitis and the development of Alzheimer’s disease (AD. However, the explanation of how periodontitis can lead to dementia remains unclear. A working hypothesis links extrinsic inflammation as a secondary cause of AD. This hypothesis suggests a compromised oral hygiene leads to a dysbiotic oral microbiome whereby Porphyromonas gingivalis, a keystone periodontal pathogen, with its companion species, orchestrates immune subversion in the host. Brushing and chewing on teeth supported by already injured soft tissues leads to bacteremias. As a result, a persistent systemic inflammatory response develops to periodontal pathogens. The pathogens, and the host’s inflammatory response, subsequently lead to the initiation and progression of multiple metabolic and inflammatory co-morbidities, including AD. Insufficient levels of essential micronutrients can lead to microbial dysbiosis through the growth of periodontal pathogens such as demonstrated for P. gingivalis under low hemin bioavailability. An individual’s diet also defines the consortium of microbial communities that take up residency in the oral and gastrointestinal (GI tract microbiomes. Their imbalance can lead to behavioral changes. For example, probiotics enriched in Lactobacillus genus of bacteria, when ingested, exert some anti-inflammatory influence through common host/bacterial neurochemicals, both locally, and through sensory signaling back to the brain. Early life dietary behaviors may cause an imbalance in the host/microbial endocrinology through a dietary intake incompatible with a healthy GI tract microbiome later in life. This imbalance in host/microbial endocrinology may have a lasting impact on mental health. This observation opens up an opportunity to explore the mechanisms, which may underlie the previously detected relationship between diet, oral/GI microbial communities, to anxiety, cognition

Size, Value, and Momentum in Polish Equity Returns: Local or International Factors?

Directory of Open Access Journals (Sweden)

Zaremba Adam

2017-09-01

Full Text Available This paper tests the performance of the Capital Asset Pricing Model (CAPM and the Fama-French three-factor and Carhart four-factor models on the Polish market. We use stock level data from April 2001 to January 2014 and find strong evidence for value and momentum effects, but only weak evidence for size premium. We formed portfolios double-sorted on size and book-to-market ratios, as well as on size and momentum, and we explain their returns with the above-mentioned asset pricing models. The CAPM is rejected and the three-factor and four-factor models perform well for the size and B/M sorted portfolios, but fail to explain returns on the size and momentum sorted portfolios. With the exception of the momentum factor, local Polish factors are not correlated with their European and global counterparts, suggesting market segmentation. Finally, the international value, size and momentum factors perform poorly in explaining cross-sectional variation in stock returns on the Polish market.

Towards a construction grammar account of the distributive PO in Polish

Directory of Open Access Journals (Sweden)

Adam Przepiórkowski

2015-11-01

Full Text Available Towards a construction grammar account of the distributive PO in Polish Polish distributive constructions involving the form po are well known for their syntactic and semantic idiosyncrasy. The aim of this paper is to show that, contrary to the received wisdom, two different lexemes po take part in such constructions: a preposition and an adnumeral operator. This explains some of the idiosyncratic behaviour, namely, the apparent ability of po to combine with different grammatical cases. A preliminary Construction Grammar analysis is proposed which eschews the potential problem of missed generalisations that such a dual account of po might engender.

Impact of polishing on the light scattering at aerogel surface

International Nuclear Information System (INIS)

Barnyakov, A.Yu.; Barnyakov, M.Yu.; Bobrovnikov, V.S.; Buzykaev, A.R.; Danilyuk, A.F.; Katcin, A.A.; Kononov, S.A.; Kirilenko, P.S.; Kravchenko, E.A.; Kuyanov, I.A.; Onuchin, A.P.; Ovtin, I.V.; Predein, A.Yu.; Protsenko, R.S.

2016-01-01

Particle identification power of modern aerogel RICH detectors strongly depends on optical quality of radiators. It was shown that wavelength dependence of aerogel tile transparency after polishing cannot be described by the standard Hunt formula. The Hunt formula has been modified to describe scattering in a thin layer of silica dust on the surface of aerogel tile. Several procedures of polishing of aerogel tile have been tested. The best result has been achieved while using natural silk tissue. The resulting block has optical smooth surfaces. The measured decrease of aerogel transparency due to surface scattering is about few percent. This result could be used for production of radiators for the Focusing Aerogel RICH detectors.

The effect of European integration on exchange rate dependence: the Polish accession to the EU

NARCIS (Netherlands)

Thiel, J.H.; van Giersbergen, N.P.A.

2010-01-01

This paper investigates the effect of the Polish accession to the European Union (EU) on the dependence between the euro-US dollar and Polish zloty-US dollar exchange rate. The dependence is estimated by means of copulas as suggested by Patton (2006). This approach allows to first specify and

Using STED and ELSM confocal microscopy for a better knowledge of fused silica polished glass interface

International Nuclear Information System (INIS)

Catrin, Rodolphe; Neauport, Jerome; Taroux, Daniel; Corbineau, Thomas; Cormont, Philippe; Maunier, Cedric; Legros, Philippe

2013-01-01

Characteristics and nature of close surface defects existing in fused silica polished optical surfaces were explored. Samples were deliberately scratched using a modified polishing process in presence of different fluorescent dyes. Various techniques including Epi-fluorescence Laser Scanning Mode (ELSM) or Stimulated Emission Depletion (STED) confocal microscopy were used to measure and quantify scratches that are sometimes embedded under the polished layer. We show using a nondestructive technique that depth of the modified region extends far below the surface. Moreover cracks of 120 nm width can be present ten micrometers below the surface. (authors)

Evaluation of the effect of polishing on flexural strength of feldspathic porcelain and its comparison with autoglazing and over glazing

Directory of Open Access Journals (Sweden)

Jalali H.

2005-06-01

Full Text Available Statement of Problem: Ceramic restorations are popular because they can provide the most natural replacement for teeth. However, the brittleness of ceramics is a primary disadvantage. There are various methods for strengthening ceramics such as metal framework, ceramic cores, and surface strengthening mechanisms through glazing, work hardening and ion exchange. Purpose: The purpose of this study was to evaluate the effect of polish on flexural strength of feldspathic porcelain and to compare it with overglaze and autoglaze. Materials and Methods: In this experimental study, one brand of feldspathic porcelain (colorlogic, Ceramco was used and forty bars (25×6×3 mm were prepared according to ISO 6872 and ADA No. 69. The specimens were randomly divided into four groups: overglazed, auto glazed, fine polish and coarse polish (clinic polish. Flexural strength of each specimen was determined by three point bending test (Universal Testing Machine, Zwick 1494, Germany. Collected data was analyzed by ANOVA and post-hoc test with P<0.05 as the limit of significance. Results: A significant difference was observed among the studied groups (P<0.0001. According to post-hoc test, flexural strength in overglaze and fine polish group were significantly stronger than clinic polish and autoglaze group (P<0.001. Although the mean value for overglazed group was higher than fine polish group, this was not statistically significant (P=0.9. Also no statistical difference was seen between autoglazed and coarse polish group (P=0.2. Conclusion: Based on the findings of this study, flexural strength achieved by fine polish (used in this study can compete with overglazing the feldespathic porcelains. It also can be concluded that a final finishing procedure that involves fine polishing may be preferred to simple staining followed by self-glazing.

Influence of Finishing and Polishing Techniques and Abrasion on Transmittance and Roughness of Composite Resins.

Science.gov (United States)

Carneiro, Pma; Ramos, T M; de Azevedo, C S; de Lima, E; de Souza, Shj; Turbino, M L; Cesar, P F; Matos, A B

The aim of this study was to evaluate the influence of finishing and polishing systems and toothbrush abrasion on transmittance (T) and surface roughness (Ra) of three composite resins (Filtek Z350 XT, Tetric N-Ceram, and IPS Empress Direct). Eighteen resin disks (10 mm diameter × 2 mm thick) finished by polyester strips had initial surface smoothness recorded, representing phase 1 (P1). Specimens were divided into three groups (n=6) according to the finishing/polishing instrument used (OneGloss, TopGloss, and Sof-Lex) to compose phase 2 samples (P2). Then specimens were subjected to 514 cycles of toothbrush simulation using a toothpaste slurry, with a constant load applied to soft bristles, and were then washed (phase 3=P3). After each phase, the specimens were examined by an optical profiler and spectrophotometer to measure Ra and T. Data were analyzed by analysis of variance, Tukey and Pearson tests. T values were statistically influenced by composite resin ( p=0.000) and phase of measurement ( p=0.000) factors, while the finishing/polishing system used ( p=0.741) did not affect T. On the other hand, Ra values were statistically affected by the factor finishing/polishing system ( p=0.000), but not by composite resin ( p=0.100) and phase of measurement ( p=0.451). Tetric N-Ceram and Empress Direct presented higher values of roughness when polished by OneGloss, while TopGloss and Sof-Lex showed a lower roughness. It can be concluded that composite resins transmitted more light after dental abrasion. Transmittance of composite resins was not modified by the distinct roughness created by finishing/polishing instruments.

Efficacy of polishing kits on the surface roughness and color stability of different composite resins.

Science.gov (United States)

Kocaagaoglu, H; Aslan, T; Gürbulak, A; Albayrak, H; Taşdemir, Z; Gumus, H

2017-05-01

Different polishing kits may have different effects on the composite resin surfaces. The aim of this study was to evaluate the surface roughness and color stability of four different composites which was applied different polishing technique. Thirty specimens were made for each composite resin group (nanohybrid, GrandioSo-GS; nanohybrid, Clearfil Majesty Esthetic-CME; hybrid, Valux Plus-VP; micro-hybrid, Ruby Comp-RC; [15 mm in diameter and 2 mm height]), with the different monomer composition and particle size from a total of 120 specimens. Each composite group was divided into three subgroups (n = 10). The first subgroup of the each composite subgroups served as control (C) and had no surface treatment. The second subgroup of the each composite resin groups was polished with finishing discs (Bisco Finishing Discs; Bisco Inc., Schaumburg, IL, USA). The third subgroup of the each composite resin was polished with polishing wheel (Enhance and PoGo, Dentsply, Konstanz, Germany). The surface roughness and the color differences measurement of the specimens were made and recorded. The data were compared using Kruskal-Wallis test, and regression analysis was used in order to examine the correlation between surface roughness and color differences of the specimens (α = 0.05). The Kruskal-Wallis test indicated significant difference among the composite resins in terms of ΔE (P composite resins in terms of surface roughness (P > 0.05). Result of the regression analysis indicated statistically significant correlation between Ra and ΔE values (P < 0.05, r2 = 0.74). The findings of the present study have clinical relevance in the choice of polishing kits used.

[Polish version of the ADOS (autism diagnostic observation schedule-generic)].

Science.gov (United States)

Chojnicka, Izabela; Płoski, Rafał

2012-01-01

The article presents the Polish version of the autism diagnostic observation schedule-generic (ADOS), which together with the autism diagnostic interview-revised (ADI-R) is cited as the "gold standard" for the diagnosis of autism. The ADOS is a standardised, semistructured observation protocol appropriate for children and adults of differing age and language levels. It is linked to ICD-10 and DSM-IV-TR criteria. The ADOS consists of four modules, ranging from module 1 for nonverbal individuals to module 4 for verbally fluent adults. The adequate inter-rater reliability for items has been established. The protocol has high discriminant validity and distinguishes children with pervasive developmental disorders from children, who are outside of the spectrum. Although it does not enable to distinguish individuals with pervasive developmental disorder, unspecified from individuals with childhood autism. The paper presents subsequent steps of the translation process of the original version into Polish, as well as a chosen adaptation strategy of the Polish version. The ADOS is a very useful tool both for clinical diagnosis and for the scientific purpose diagnosis. In this last case it is extremely important to use a standardised method. Until now, there was no standardised diagnostic tool for autism in Poland.

Cost of equity on the Polish and global coal market - comparative analysis

OpenAIRE

Aneta Michalak

2014-01-01

The mining industry in Poland as well as in the world is considered to be a strategic industry, of special significance for the economy. At the same time it is an industry requiring high capital outlays. Equity plays an important role in financing of the mining enterprises. The objective of the article is to compare the cost of equity on the Polish and global coal market. The object of the research are the Polish and foreign mining enterprises listed on the stock markets. The basic research m...

Smooth polishing of femtosecond laser induced craters on cemented carbide by ultrasonic vibration method

Science.gov (United States)

Wang, H. P.; Guan, Y. C.; Zheng, H. Y.

2017-12-01

Rough surface features induced by laser irradiation have been a challenging for the fabrication of micro/nano scale features. In this work, we propose hybrid ultrasonic vibration polishing method to improve surface quality of microcraters produced by femtosecond laser irradiation on cemented carbide. The laser caused rough surfaces are significantly smoothened after ultrasonic vibration polishing due to the strong collision effect of diamond particles on the surfaces. 3D morphology, SEM and AFM analysis has been conducted to characterize surface morphology and topography. Results indicate that the minimal surface roughness of Ra 7.60 nm has been achieved on the polished surfaces. The fabrication of microcraters with smooth surfaces is applicable to molding process for mass production of micro-optical components.

The formation of the polish opposite movement in Western Ukraine at the beginning of the Second world war

Directory of Open Access Journals (Sweden)

Viktoriya V. Dashko

2016-02-01

Full Text Available The article highlights the nature of the Soviet totalitarian ethnic policy and its influence on the origin of the Polish opposite movement in Western Ukraine at the beginning of the Second World War. It also clarifies the main factors of the formation of active opposite movements among the Polish part of population in the Western Ukraine territory, which withdrew to the Soviet Union due to the distribution of Poland as a result of the Molotov-Ribbentrop Pact. The author defined category of Polish nationality persons, who were dissatisfied with Stalin’s repressive policies in 1939-1941 and become that social environment, in which finally formed opposite movement to totalitarianism and, in particular, antinational regime against the Polish ethnos, and the environment from which later appeared activists of this movement. By the author was analyzed the activity of Soviet authorities in the occupied territories of the former «Wshodnih kresuv» of the Second Rich Pospolyta and determined main factors that led to dissatisfaction with the rigid Soviet policy against the former government officials, military precipitators and servants of the Roman Catholic Church. Investigated and determined features of the Polish opposite movement formation in the former eastern Polish territories occupied in 1939 by the Soviet Union and seized in 1941 by Nazi Germany. The article also describes the origin and activity of the first underground Polish armed forces on Ukrainian territory.

European Society of Endocrinology Clinical Guideline: Treatment of chronic hypoparathyroidism in adults.

Science.gov (United States)

Bollerslev, Jens; Rejnmark, Lars; Marcocci, Claudio; Shoback, Dolores M; Sitges-Serra, Antonio; van Biesen, Wim; Dekkers, Olaf M

2015-08-01

Hypoparathyroidism (HypoPT) is a rare (orphan) endocrine disease with low calcium and inappropriately low (insufficient) circulating parathyroid hormone levels, most often in adults secondary to thyroid surgery. Standard treatment is activated vitamin D analogues and calcium supplementation and not replacement of the lacking hormone, as in other hormonal deficiency states. The purpose of this guideline is to provide clinicians with guidance on the treatment and monitoring of chronic HypoPT in adults who do not have end-stage renal disease. We intend to draft a practical guideline, focusing on operationalized recommendations deemed to be useful in the daily management of patients. This guideline was developed and solely sponsored by The European Society of Endocrinology, supported by CBO (Dutch Institute for Health Care Improvement) and based on the Grading of Recommendations Assessment, Development and Evaluation (GRADE) principles as a methodological base. The clinical question on which the systematic literature search was based and for which available evidence was synthesized was: what is the best treatment for adult patients with chronic HypoPT? This systematic search found 1100 articles, which was reduced to 312 based on title and abstract. The working group assessed these for eligibility in more detail, and 32 full-text articles were assessed. For the final recommendations, other literature was also taken into account. Little evidence is available on how best to treat HypoPT. Data on quality of life and the risk of complications have just started to emerge, and clinical trials on how to optimize therapy are essentially non-existent. Most studies are of limited sample size, hampering firm conclusions. No studies are available relating target calcium levels with clinically relevant endpoints. Hence it is not possible to formulate recommendations based on strict evidence. This guideline is therefore mainly based on how patients are managed in clinical practice

Surface Roughness, Microhardness, and Microleakage of a Silorane-Based Composite Resin after Immediate or Delayed Finishing/Polishing

Directory of Open Access Journals (Sweden)

Fernanda Carvalho Rezende Lins

2016-01-01

Full Text Available Objective. This study evaluated the effect of immediate or delayed finishing/polishing using different systems on the surface roughness, hardness, and microleakage of a silorane-based composite. Material and Methods. Specimens were made with silorane-based composite (Filtek P90, 3M ESPE and assigned to the treatments: control (light-cured; aluminum oxide discs (Sof-Lex, 3M ESPE; diamond-impregnated silicone tips (Astropol, Ivoclar Vivadent; aluminum oxide-impregnated silicone tips (Enhance, Dentsply. Half of the specimens were finished/polished immediately and the rest after 7 days. Surface roughness (Ra, μm; n=20 and Vickers microhardness (50 g; 45 s; n=10 were measured. Cavities were prepared in bovine incisors and filled with Filtek P90. The fillings received immediate or delayed finishing/polishing (n=10 and were subjected to dye penetration test (0.5% basic fuchsin, 24 h. Data were analyzed by ANOVA and Scheffe, Kruskal-Wallis, and Mann-Whitney tests (p<0.05. Results. The finishing/polishing system significantly influenced roughness and microhardness (p<0.0001. For enamel, microleakage was not affected by the finishing/polishing system (p=0.309. For dentin, Sof-Lex discs and Astropol points promoted greater microleakage than Enhance points (p=0.033. Conclusion. Considering roughness, microhardness, and microleakage together, immediate finishing/polishing of a silorane-based composite using aluminum oxide discs may be recommended.

THE EFFECTIVENESS OF INNOVATION PROJECTS IN POLISH INDUSTRY

Directory of Open Access Journals (Sweden)

Jan Zwolak

2016-03-01

Full Text Available The objective of the study was to determine the dependency of the net income from the sales of new and significantly modernised products on the expenditure on (1 marketing and staff training as well as on the expenditure on (2 land, buildings and structures; machinery, technical equipment and tools; and means of transportation within the scope of product and process innovations in Polish industry in 2010. Furthermore the study was intended to determine the effectiveness of the abovementioned expenditure aggregated to descriptive variables (1 and 2. In the study, the correlation and regression methods as well as the least squares method was applied.The estimation resulted in the determination of functional dependency of net sales income on the expenditure on marketing and staff training (0.5040 as well as on the expenditure on land, buildings and structures; machinery, technical equipment and tools; and means of transportation (0.8064 in the field of innovative processes in industry. The net sales income increased more than proportionally relative to the combined effect of the aforementioned expenditure (1.3104. The total increase in the aforementioned expenditure by 10% resulted in the increase in net sales income by 13.1%. The determined power regression model may have practical implications for the economic evaluation of expenditure in innovative processes in Polish industry in the future, as well as for the forecast (prediction.The expenditure application in innovative processes may also have social implications connected to the increase in the value-in-use of products and with the increase in the social efficiency of work in Polish industry.

Wladimir Krzyzanowski, 123 Polish Hero of the Civil War in the USA

Directory of Open Access Journals (Sweden)

PIYUK T.G.

2014-09-01

Full Text Available The article is dedicated to the young Polish revolutionist Wladimir Krzyzanowski who emigrated from Great Poland to the US after failed uprising in 1846 against Prussia in order to avoid possible arrest. He went to Hamburg, Germany and sailed from there to the United States.W. Krzyzanowski managed to become a successful and prosperous businessman and politician, and he was lucky in his personal life, he married a girl with a name and a significant dowry. He considered slavery not only anachronistic, but also a disgrace to the young state, and at the same time, he admired American democracy and American people. In Washington he recruited the company of Polish immigrants which became one of the first companies of Union Soldiers. Krzyzanowski then moved his company to New York and enlisted more immigrants and soon became a Colonel of the 58th Infantry Division, listed in the official Army Register as the “Polish Legion”. He participated in the Civil War battles of Cross-Keys, Bull Run, Chancellorsville, and Gettysburg. “Polish Legion”, led by Krzyzanowski, made himself famous in the main battle at Gettysburg. Subsequently, the memorial of granite was erected to legion in the immediate vicinity of the city.The author’s attention was attracted by the eccentric personality of the Pole, known in Poland and in America. In her work she explores Krzyzanowski’s life and service to the American people

Trauma Related Guilt Inventory - psychometric properties of the Polish adaptation (TRGI-PL).

Science.gov (United States)

Popiel, Agnieszka; Zawadzki, Bogdan

2015-01-01

AIM : Although various aspects of guilt are frequent problems of patients suffering from PTSD, they have been included into the diagnostic criteria for PTSD just in the present version DSM-5. Kubany proposed a cognitive conceptualization of guilt in PTSD followed by development of the Trauma Related Guilt Inventory (TRGI). The aim of the paper is to present psychometric properties of the Polish version of the inventory - the TRGI-PL. A Polish adaptation of the Trauma-Related Guilt Inventory was applied to a sample of 280 motor vehicle (MVA) participants (147 females, 133 males of age from 18 to 80 (M=34,93, SD=13,71) within 1-24 months after a MVA (M=10,18, SD=6,23). Validation of the Polish version was done by analyzing the internal structure of the instrument and comparing the emotional and cognitive aspects of guilt assessed by the TRGI with PTSD symptoms, post-traumatic cognitions and responsibility for MVA and subjective agreement with the judgment. The model with four latent factors: Distress, Hindsight-Bias/Responsibility, Wrongdoing and Insufficient Justification scales showed acceptable fit (Satorra-Bentler chi2=518,62, df=203, pguilt, obtained in the studies on original TRGI version. Reliability coefficients are similar to original version. Correlations with other PTSD measures showed satisfactory convergent and discriminative validity. The Polish adaptation of the Trauma-Related Guilt Inventory is a reliable and valid tool for assessing guilt as a multidimensional phenomenon, comprising emotional and several cognitive characteristics, in trauma survivors.

Comparative evaluation of effect of different polishing systems on surface roughness of composite resin: An in vitro study.

Science.gov (United States)

Chour, Rashmi G; Moda, Aman; Arora, Arpana; Arafath, Muhmmed Y; Shetty, Vikram K; Rishal, Yousef

2016-08-01

Satisfactory composite restoration depends upon its smooth finish, quality of polishing agents, type of composite material used, and its composition. The present study evaluated the effect of different polishing systems on the surface roughness of composite resin. Forty discs of composite were prepared and equally subjected to different finishing and polishing procedures; (i) unpolished control group, (ii) sof-lex discs, (iii) diamond tips, and (iv) Astrobrush groups. Later, the surface roughness for the entire specimen was evaluated using Profilomotor. Data were tabulated and statistically analyzed using analysis of variance and Tukey's test at significance level of 0.001. Composite surface roughness after polishing was statistically significant between the groups. Sof-lex group produced lesser surface roughness compared to control, Astrobrush, and diamond group. The present study indicated that diamond tips can be used to remove rough surface whereas sof-lex can be used for final finish and polish of the composite restoration.

Analysis of forensically used autosomal short tandem repeat markers in Polish and neighboring populations.

Science.gov (United States)

Soltyszewski, Ireneusz; Plocienniczak, Andrzej; Fabricius, Hans Ake; Kornienko, Igor; Vodolazhsky, Dmitrij; Parson, Walther; Hradil, Roman; Schmitter, Hermann; Ivanov, Pavel; Kuzniar, Piotr; Malyarchuk, Boris A; Grzybowski, Tomasz; Woźniak, Marcin; Henke, Jurgen; Henke, Lotte; Olkhovets, Sergiv; Voitenko, Vladimir; Lagus, Vita; Ficek, Andrej; Minárik, Gabriel; de Knijff, Peter; Rebała, Krzysztof; Wysocka, Joanna; Kapińska, Ewa; Cybulska, Lidia; Mikulich, Alexei I; Tsybovsky, Iosif S; Szczerkowska, Zofia; Krajewski, Paweł; Ploski, Rafał

2008-06-01

The purpose of this study was to evaluate the homogeneity of Polish populations with respect to STRs chosen as core markers of the Polish Forensic National DNA Intelligence Database, and to provide reference allele frequencies and to explore the genetic interrelationship between Poland and neighboring countries. The allele frequency distribution of 10 STRs included in the SGMplus kit was analyzed among 2176 unrelated individuals from 6 regional Polish populations and among 4321 individuals from Germany (three samples), Austria, The Netherlands, Sweden, Czech Republic, Slovakia, Belarus, Ukraine and the Russian Federation (six samples). The statistical approach consisted of AMOVA, calculation of pairwise Rst values and analysis by multidimensional scaling. We found homogeneity of present day Poland and consistent differences between Polish and German populations which contrasted with relative similarities between Russian and German populations. These discrepancies between genetic and geographic distances were confirmed by analysis of an independent data set on Y chromosome STRs. Migrations of Goths, Viking influences, German settlements in the region of Volga river and/or forced population resettlements and other events related to World War II are the historic events which might have caused these finding.

Adjusting dental ceramics: An in vitro evaluation of the ability of various ceramic polishing kits to mimic glazed dental ceramic surface.

Science.gov (United States)

Steiner, René; Beier, Ulrike S; Heiss-Kisielewsky, Irene; Engelmeier, Robert; Dumfahrt, Herbert; Dhima, Matilda

2015-06-01

During the insertion appointment, the practitioner is often faced with the need to adjust ceramic surfaces to fit a restoration to the adjacent or opposing dentition and soft tissues. The purpose of this study was to assess the ceramic surface smoothness achieved with various commercially available ceramic polishing kits on different commonly used ceramic systems. The reliability of the cost of a polishing kit as an indicator of improved surface smoothness was assessed. A total of 350 ceramic surfaces representing 5 commonly available ceramic systems (IPS Empress Esthetic, IPS e.max Press, Cergo Kiss, Vita PM 9, Imagine PressX) were treated with 5 types of ceramic polishing systems (Cerapreshine, 94006C, Ceramiste, Optrafine, Zenostar) by following the manufacturers' guidelines. The surface roughness was measured with a profilometer (Taylor Hobson; Precision Taylor Hobson Ltd). The effects of ceramic systems and polishing kits of interest on surface roughness were analyzed by 2-way ANOVA, paired t test, and Bonferroni corrected significance level. The ceramic systems and polishing kits statistically affected surface roughness (Pceramic surface. No correlation could be established between the high cost of the polishing kit and low surface roughness. None of the commonly used ceramic polishing kits could create a surface smoother than that of glazed ceramic (Pceramic polishing kits is not recommended as a reliable indicator of better performance of ceramic polishing kits (P>.30). Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Features of the Institutional Structure of the Polish Stock Market under Conditions of Transformational Changes in the Global Financial Environment

Directory of Open Access Journals (Sweden)

Goncharenko Nataliia I.

2017-03-01

Full Text Available Under modern conditions of transformational changes in the global financial environment, the international stock market acquires stable features of activization of investment activity, formation of a large network of professional participants in the stock market and its multi-level institutional structure, expansion of the range of trade in securities, access of economic entities of different countries to financial resources and diversification of mechanisms of concentration, etc. There conducted a study of peculiarities of the institutional structure of the Polish stock market in the context of transformational changes in the global economic system. The factors influencing the volume of capitalization of the Warsaw Stock Exchange are analyzed; the dependence of the capitalization of the Exchange on foreign portfolio investments in shares of Polish issuers is revealed. Based on the results of own calculations of multiple correlation coefficients, the level of dependence between capital stock market indicators and assets of such financial institutions in Poland as investment and open pension funds, insurance companies is determined, and a significant interconnection of assets of investment and open pension funds and insurance companies is revealed. The obtained results can become a basis for institutional investors in the process of making effective decisions on expanding the range of trading in securities.

[Surface roughness and gloss of novel flowable composites after polishing and simulated brushing wear].

Science.gov (United States)

Wang, R L; Yuan, C Y; Pan, Y X; Tian, F C; Wang, Z H; Wang, X Y

2017-04-09

Objective: To investigate surface properties of novel flowable composites after polishing and simulated brushing wear, compared to their pasty counterpart. Methods: Composites employed in this study were: three flowable composites (A1: Clearfil Majesty ES Flow; B1: Beautifil Flow Plus F00; C1: Filtek Bulk Fill) and three paste composites (A2: Clearfil Majesty; B2: Beautifil; C2: Filtek Z350. Eleven disk-shaped specimens were made for each material. The specimens were cured, then subjected to sandpaper finishing for 20 s, one-step polishing for 30 s, finally subjected to simulated brushing for 10 000 cycles. Surface roughness and glossiness were measured before finishing, after finishing, after polishing, after 5 000 brushing cycles and after 10 000 brushing cycles, respectively. Data obtained were analyzed using two-way ANOVA method. Scanning electron microscope was employed to examine the microscopic appearance of each material. Results: Surface roughness (0.11~0.22 μm) and glossiness (74.25~86.48 GU) of each material were similar after one-step polishing. After brushing simulation, roughness increased significantly and glossiness decreased significantly for each material ( Pgloss ([50.68±1.58] GU) after final wear ( P< 0.05). Flowable composites of group A1 and B1 tested in the present setup showed better surface properties compared to their pasty counterpart (group A2 and B2). Conclusions: Within the limit of this study, flowable composites tested in the present research can obtain similar surface polish or even better than the paste composite counterpart.

Conservation endocrinology: A noninvasive tool to understand relationships between carnivore colonization and ecological carrying capacity

Science.gov (United States)

Berger, J.; Testa, J.W.; Roffe, T.; Monfort, S.L.

1999-01-01

Reproductive technology, especially the diagnosis of pregnancy by radioimmunoassay of fecal steroid metabolites, is an important component of captive propagation, but its role in our understanding of ecological interactions and in situ biological restoration has been more limited. Where large herbivores have been 'released' from predation by the extirpation of carnivores, controversy often exists about possible detrimental effects at the ecosystem level A related concern is that the reestablishment of large carnivores may decrease the availability of prey populations for human subsistence. We suggest that pregnancy assays can be a valuable tool to help distinguish between the roles of predation versus food-imposed limitations on population size and their effects on juvenile recruitment in wild species. We explored this issue through analyses of fecal progestagen concentration (FPC) levels to document pregnancy in moose (Alces alces) in the southern Greater Yellowstone Ecosystem, a site where wolves (Canis lupus) and grizzly bears (Ursus arctos) are recolonizing former habitats after an absence of more than 60 years. Pregnancy was clearly discernible (mean FPC for pregnant and nonpregnant females, respectively: 10.60 vs. 2.57 ??g/g; p endocrinology can be applied to issues involving reproductive events within an ecological context. They also affirm that noninvasive and generally inexpensive endocrinological procedures will be applicable to understanding interactions between recolonizing predators and prey, an issue that will continue to arise because of global restoration efforts, and to the study of rare ungulates in remote systems where data on reproductive events are difficult to obtain.

European Society for Paediatric Endocrinology Consensus Guidelines on Screening, Diagnosis, and Management of Congenital Hypothyroidism

Science.gov (United States)

Léger, Juliane; Olivieri, Antonella; Donaldson, Malcolm; Torresani, Toni; Krude, Heiko; van Vliet, Guy; Polak, Michel

2014-01-01

Objective: The aim was to formulate practice guidelines for the diagnosis and management of congenital hypothyroidism (CH). Evidence: A systematic literature search was conducted to identify key articles relating to the screening, diagnosis, and management of CH. The evidence-based guidelines were developed with the Grading of Recommendations, Assessment, Development and Evaluation (GRADE) system, describing both the strength of recommendations and the quality of evidence. In the absence of sufficient evidence, conclusions were based on expert opinion. Consensus Process: Thirty-two participants drawn from the European Society for Paediatric Endocrinology and five other major scientific societies in the field of pediatric endocrinology were allocated to working groups with assigned topics and specific questions. Each group searched the literature, evaluated the evidence, and developed a draft document. These papers were debated and finalized by each group before presentation to the full assembly for further discussion and agreement. Recommendations: The recommendations include: worldwide neonatal screening, approaches to assess the cause (including genotyping) and the severity of the disorder, the immediate initiation of appropriate L-T4 supplementation and frequent monitoring to ensure dose adjustments to keep thyroid hormone levels in the target ranges, a trial of treatment in patients suspected of transient CH, regular assessments of developmental and neurosensory functions, consulting health professionals as appropriate, and education about CH. The harmonization of diagnosis, management, and routine health surveillance would not only optimize patient outcomes, but should also facilitate epidemiological studies of the disorder. Individuals with CH require monitoring throughout their lives, particularly during early childhood and pregnancy. PMID:24446653

Advances in conservation endocrinology: the application of molecular approaches to the conservation of endangered species.

Science.gov (United States)

Tubbs, Christopher; McDonough, Caitlin E; Felton, Rachel; Milnes, Matthew R

2014-07-01

Among the numerous societal benefits of comparative endocrinology is the application of our collective knowledge of hormone signaling towards the conservation of threatened and endangered species - conservation endocrinology. For several decades endocrinologists have used longitudinal hormone profiles to monitor reproductive status in a multitude of species. Knowledge of reproductive status among individuals has been used to assist in the management of captive and free-ranging populations. More recently, researchers have begun utilizing molecular and cell-based techniques to gain a more complete understanding of hormone signaling in wildlife species, and to identify potential causes of disrupted hormone signaling. In this review we examine various in vitro approaches we have used to compare estrogen receptor binding and activation by endogenous hormones and phytoestrogens in two species of rhinoceros; southern white and greater one-horned. We have found many of these techniques valuable and practical in species where access to research subjects and/or tissues is limited due to their conservation status. From cell-free, competitive binding assays to full-length receptor activation assays; each technique has strengths and weaknesses related to cost, sensitivity, complexity of the protocols, and relevance to in vivo signaling. We then present a novel approach, in which receptor activation assays are performed in primary cell lines derived from the species of interest, to minimize the artifacts of traditional heterologous expression systems. Finally, we speculate on the promise of next generation sequencing and transcriptome profiling as tools for characterizing hormone signaling in threatened and endangered species. Copyright © 2014 Elsevier Inc. All rights reserved.

60-inch annular pitch polisher for LASL's LASER-fusion effort

International Nuclear Information System (INIS)

Williamson, R.

1978-01-01

The Antares laser will require that about 100 high-precision NaCl windows of 18-in. diameter be produced, maintained, and repaired. To aid the industry in achieving the required production rates, a polishing development program was undertaken by LASL's Laser Division in collaboration with the Air Force and International Laser Systems. The design and initial shakedown of the polishing machine is described. Preliminary results indicate the machine's design is sound, its operation is generally simple, and it should be capable of finishing 18-in. NaCl to better than lambda/2 visible and 20-10 surface. Shakedown work with glass has demonstrated 0-0 surface, complete absence of edge roll, and lambda/16 over 12 in., and lambda/6 over 19 in

Effect of different polishing systems on the surface roughness of nano-hybrid composites

OpenAIRE

Brijesh Patel; Naveen Chhabra; Disha Jain

2016-01-01

Objective: The study aimed to investigate the influence of different polishing systems on the surface roughness of nano-hybrid composite resins. Background: Different shapes of polishing systems are available according to the site of work. To minimize variability, a new system with single shape is developed that can be utilized in both anterior as well as posterior teeth. Materials and Methods: Seventy composite discs were fabricated using Teflon well (10 mm × 3 mm). Two main group of...

Sexual activity of Polish adults

Directory of Open Access Journals (Sweden)

Beata Pastwa-Wojciechowska

2014-03-01

Full Text Available Aim. The purpose of this research was to explore the subject of sexual activity in the Polish population, with special focus on age and gender differences, and sexual infidelity. Sexual activity is one of the basic factors in initiating and maintaining relationships. On the one hand, sexual activity enables us to meet natural needs and maintain an intimate relationship with another human being; on the other, it may allow us to overcome loneliness and social isolation by providing the opportunity to express feelings of closeness and unity. Material and method. The research was conducted on a representative group of 3,200 Poles aged between 15–49, with the support of a well-known Polish research company – TNS OBOP. Face-to-face and Pencil and Paper (PAPI interviews were carried out. Results. The results focus on two main issues: the age and motives of sexual initiation among teenagers (with a significant percentage starting their sexual activity at the age of 15, and the quality of the sexual lives of adults (average number of sexual partners, sexual infidelity and sexual satisfaction. Conclusion. There is dependence between the type of relationship and the performance or non-performance of sexual activity, as well as the quality of the relationship. Among both adolescents and adults, remaining in a stable relationship (partnership or marriage promotes loyalty. The performance of sexual goals turns out to be an important mechanism regulating the interpersonal aspects of a relationship, influencing their perception and evaluation.

The factorial structure of job-related affective well-being: Polish adaptation of the Warr's measure.

Science.gov (United States)

Mielniczuk, Emilia; Łaguna, Mariola

2018-02-16

The first aim of the study reported in this article was to test the factorial structure of job-related affect in a Polish sample. The second aim was to develop the Polish adaptation of the Warr's job-related affective well-being measure published in 1990, which is designed to assess 4 types of affect at work: anxiety, comfort, depression, enthusiasm. A longitudinal study design with 2 measurement times was used for verifying the psychometric properties of the Polish version of the measure. The final sample consisted of 254 Polish employees from different professions. Participants were asked to fill in a set of questionnaires consisting of measures capturing job-related affective well-being, mood, and turnover intention. The first step of analysis was to test the theoretically-based structure of the job-related affective well-being measure in a Polish sample. The confirmatory factor analysis revealed that a 4-factor model best describes the structure of the measure in comparison to 5 alternative models. Next, reliability of this measure was assessed. All scales achieved good internal consistency and acceptable test-retest reliability after 2 weeks. Finally, the convergent and discriminant validity as well as the criterion and predictive validity of all job-related affective well-being scales was confirmed, based on correlations between job-related affect and mood as well as turnover intention. The results suggest that the Polish adaptation of Warr's job-related affective well-being measure can be used by scientists as well as by practitioners who aim at assessing 4 types of affective well-being at a work context. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Word Sense Disambiguation Based on Large Scale Polish CLARIN Heterogeneous Lexical Resources

Directory of Open Access Journals (Sweden)

Paweł Kędzia

2015-12-01

Full Text Available Word Sense Disambiguation Based on Large Scale Polish CLARIN Heterogeneous Lexical Resources Lexical resources can be applied in many different Natural Language Engineering tasks, but the most fundamental task is the recognition of word senses used in text contexts. The problem is difficult, not yet fully solved and different lexical resources provided varied support for it. Polish CLARIN lexical semantic resources are based on the plWordNet — a very large wordnet for Polish — as a central structure which is a basis for linking together several resources of different types. In this paper, several Word Sense Disambiguation (henceforth WSD methods developed for Polish that utilise plWordNet are discussed. Textual sense descriptions in the traditional lexicon can be compared with text contexts using Lesk’s algorithm in order to find best matching senses. In the case of a wordnet, lexico-semantic relations provide the main description of word senses. Thus, first, we adapted and applied to Polish a WSD method based on the Page Rank. According to it, text words are mapped on their senses in the plWordNet graph and Page Rank algorithm is run to find senses with the highest scores. The method presents results lower but comparable to those reported for English. The error analysis showed that the main problems are: fine grained sense distinctions in plWordNet and limited number of connections between words of different parts of speech. In the second approach plWordNet expanded with the mapping onto the SUMO ontology concepts was used. Two scenarios for WSD were investigated: two step disambiguation and disambiguation based on combined networks of plWordNet and SUMO. In the former scenario, words are first assigned SUMO concepts and next plWordNet senses are disambiguated. In latter, plWordNet and SUMO are combined in one large network used next for the disambiguation of senses. The additional knowledge sources used in WSD improved the performance

Magnetic field sensor based on double-sided polished fibre-Bragg gratings

International Nuclear Information System (INIS)

Tien, Chuen-Lin; Hwang, Chang-Chou; Liu, Wen-Feng; Chen, Hong-Wei

2009-01-01

A new magnetic field sensor based on double-sided polished fibre-Bragg gratings (FBGs) coated with an iron thin film for measuring magnetic flux density was experimentally demonstrated with the sensitivity of 25.6 nm T −1 . The sensing mechanism is based on the Bragg wavelength shift as the magnetic field is measured by the proposed sensing head. Results of this study present the intensity of the reflected optical signal as a function of the applied strain on the FBG. This paper shows that an improved method for sensing the wavelength shift with changes in external magnetic field is developed by use of the double-sided polished FBGs

Polish Vocabulary Development in 2-Year-Olds: Comparisons with English Using the Language Development Survey

Science.gov (United States)

Rescorla, Leslie; Constants, Holly; Bialecka-Pikul, Marta; Stepien-Nycz, Malgorzata; Ochal, Anna

2017-01-01

Purpose: The objective of this study was to compare vocabulary size and composition in 2-year-olds learning Polish or English as measured by the Language Development Survey (LDS; Rescorla, 1989). Method: Participants were 199 Polish toddlers (M = 24.14 months, SD = 0.35) and 422 U.S. toddlers (M = 24.69 months, SD = 0.78). Results: Test-retest…

Influence of air-powder polishing on bond strength and surface-free energy of universal adhesive systems.

Science.gov (United States)

Tamura, Yukie; Takamizawa, Toshiki; Shimamura, Yutaka; Akiba, Shunsuke; Yabuki, Chiaki; Imai, Arisa; Tsujimoto, Akimasa; Kurokawa, Hiroyasu; Miyazaki, Masashi

2017-11-29

The influences of air-powder polishing with glycine or sodium bicarbonate powders on shear bond strengths (SBS) and surface-free energies of universal adhesives were examined. Scotchbond Universal Adhesive (SU, 3M ESPE), G-Premio Bond (GP, GC), Adhese Universal (AU, Ivoclar Vivadent), and All-Bond Universal (AB, Bisco) were used in this study. Bovine dentin surfaces were air polished with glycine or sodium bicarbonate powders prior to the bonding procedure, and resin pastes were bonded to the dentin surface using universal adhesives. SBSs were determined after 24-h storage in distilled water at 37°C. Surface-free energy was then determined by measuring contact angles using three test liquids on dentin surfaces. Significantly lower SBSs were observed for dentin that was air-powder polished and surface-free energies were concomitantly lowered. This study indicated that air-powder polishing influences SBSs and surface-free energies. However, glycine powder produced smaller changes in these surface parameters than sodium bicarbonate.

Comparison of different polishing methods on the surface roughness of microhybrid, microfill, and nanofill composite resins.

Science.gov (United States)

Moda, Mariana D; Godas, André Gustavo de L; Fernandes, Juliana C; Suzuki, Thaís Y U; Guedes, Ana Paula A; Briso, André L F; Bedran-Russo, Ana Karina; Dos Santos, Paulo H

2018-02-01

The aim of the present study was to evaluate the effect of different polishing methods on the surface roughness of resin-based composites subjected to a thermocycling procedure. A total of 192 specimens were divided into 24 groups, according to composite materials (Filtek Z250, Point 4, Renamel Nanofill, Filtek Supreme Plus, Renamel Microfill, and Premise) and finishing and polishing systems (Sof-Lex Pop On, Super Snap, Flexidisc, and Flexidisc+Enamelize). The specimens were subjected to thermocycling (5000 cycles). Filtek Supreme Plus showed the lowest surface roughness values before thermocycling. After thermocycling, Filtek Supreme Plus continued to have the lowest surface roughness, with a statistically-significant difference for the other materials. After thermocycling, there was no statistically-significant difference among all the polishing techniques studied. The thermocycling was concluded as being able to change composite resins' surface roughness, whereas different finishing and polishing methods did not result in surface roughness changes after thermocycling. © 2017 John Wiley & Sons Australia, Ltd.

Polish Defense Policy in the Context of National Security Strategy

National Research Council Canada - National Science Library

Bieniek, Piotr S

2006-01-01

...) and the North Atlantic Treaty Organization (NATO). Polish security policy and strategy is shaped by its geographical location, which places Poland in NATO's main strategic area opposite the Russian Federation and Belarus...

Natural mineral bottled waters available on the Polish market as a source of minerals for the consumers. Part 2: The intake of sodium and potassium.

Science.gov (United States)

Gątarska, Anna; Ciborska, Joanna; Tońska, Elżbieta

Natural mineral waters are purchased and consumed according to consumer preferences and possible recommendations. The choice of appropriate water should take into account not only the general level of mineralization but also the content of individual components, including electrolytes such as sodium and potassium. Sodium is necessary to ensure the proper physiological functions of the body. It is defined as a health risk factor only when its excessive intake occurs. Potassium acts antagonistically towards sodium and calcium ions, contributes to a reduction of the volume of extracellular fluids and at the same time reduces muscle tension and permeability of cell membranes. The demand for sodium and potassium is of particular importance in people expending significant physical effort, where an increased electrolyte supply is recommended. The aim of the study was to estimate the content of sodium and potassium in natural mineral waters available in the Polish market and to evaluate the intake of those components with the commercially available mineral waters by different groups of consumers at the assumed volume of their consumption. The research material consisted of natural mineral waters of forty various brands available on the Polish market. The examined products were either produced in Poland or originated in other European countries. Among the products under examination, about 30% of the waters were imported from Lithuania, Latvia, the Czech Republic, France, Italy and Germany. A sample for analyses consisted of two package units of the examined water from different production lots. Samples for research were collected at random. The study was conducted with the same samples in in which calcium and magnesium content was determined, which was the subject of the first part of the study. The content of sodium and potassium was determined using the emission technique (acetylene-air flame), with the use of atomic absorption spectrometer – ICE 3000 SERIES – THERMO

Polish Decadence: Leopold Staff's Igrzysko in the European Context

Directory of Open Access Journals (Sweden)

Julia Przybos

2012-03-01

expression. It is my hypothesis that taken out of its secular context, religious revisionism of the kind practiced by French decadents may be seen as shocking transgression in a fiercely catholic country like Poland. In the country that lost its independence in 1794 and was ever since seeking to regain it, Catholic Church was perceived as an essential ally in the struggle against main occupying powers: Orthodox Russia, and Protestant Prussia. In the course of the 19th century Catholicism and patriotism had been effectively fused in Polish national conscience. In this charged political context a Polish author revisiting Church dogma or tradition was at risk of being perceived not only as a religious outcast but also as a traitor to the cause of Polish independence. To test my hypothesis I propose to examine Igrzysko (Game, a forgotten play by Leopold Staff. Admired today chiefly as a poet, the young Staff wrote Igrzysko in Poland after a long sojourn in Paris where he had lived among the international crowd of fin de siècle writers and artists. The play was first produced in Lemberg in 1909 and after a few performances vanished forever from Polish theatrical repertoire. Leopold Staff's play is set in ancient Rome and depicts tribulations of an actor who, while impersonating a Christian awaiting crucifixion, converts to Christianity. In his play, Staff revives the legend of Saint Genesius, an actor in Arles who died a martyr's death in 286 under Diocletian. In Spain, Saint Genesius's legend inspired Lope de Vega who wrote Acting is Believing (Lo fingido verdadero, 1607. In France, it was the source for Jean Rotrou's Saint Genest (1646. All told, the legend of Genesius is a popular theme for artists who wish to explore the distinction between art and life. An important addition to this old tradition, Staff's play contains, however, a decadent and potentially scandalous twist. Unlike in Acting is Believing and Saint Genest, the protagonist's conversion is very short

Validating the psycholinguistic aspects of LITMUS-CLT: Evidence from Polish and Norwegian.

Science.gov (United States)

Hansen, Pernille; Simonsen, Hanne Gram; Łuniewska, Magdalena; Haman, Ewa

2017-01-01

The novel assessment tool Cross-Linguistic Lexical Tasks (LITMUS-CLT) aims for comparable cross-linguistic assessment of multilingual children's lexical skills by basing each language version on two language-specific variables: age of acquisition (AoA) and complexity index (CI), a novel measure related to phonology, morphology, exposure and etymology. This article investigates the validity of this methodology, asking whether the underlying properties are robust predictors of children's performance. The Polish and Norwegian CLTs were used to assess 32 bilingual Polish-Norwegian, 34 monolingual Norwegian and 36 monolingual Polish children. The effects of AoA and CI were contrasted with frequency in child directed speech (CDS) and imageability, two known predictors of lexical development. AoA was a reliable predictor of performance within all parts of CLT, in contrast to CI. Apart from AoA, only exposure and CDS frequency had a significant effect within both monolinguals and bilinguals. These results indicate that CLT assesses lexical skills in a cross-linguistically comparable manner, but suggest a revision of the CI measure.

Experimental Evaluation of the "Polished Panel Optical Receiver" Concept on the Deep Space Network's 34 Meter Antenna

Science.gov (United States)

Vilnrotter, Victor A.

2012-01-01

The potential development of large aperture ground-based "photon bucket" optical receivers for deep space communications has received considerable attention recently. One approach currently under investigation proposes to polish the aluminum reflector panels of 34-meter microwave antennas to high reflectance, and accept the relatively large spotsize generated by even state-of-the-art polished aluminum panels. Here we describe the experimental effort currently underway at the Deep Space Network (DSN) Goldstone Communications Complex in California, to test and verify these concepts in a realistic operational environment. A custom designed aluminum panel has been mounted on the 34 meter research antenna at Deep-Space Station 13 (DSS-13), and a remotely controlled CCD camera with a large CCD sensor in a weather-proof container has been installed next to the subreflector, pointed directly at the custom polished panel. Using the planet Jupiter as the optical point-source, the point-spread function (PSF) generated by the polished panel has been characterized, the array data processed to determine the center of the intensity distribution, and expected communications performance of the proposed polished panel optical receiver has been evaluated.

Position statement: Gender dysphoria in childhood and adolescence. Working Group on Gender Identity and Sexual Development of the Spanish Society of Endocrinology and Nutrition (GIDSEEN).

Science.gov (United States)

Esteva de Antonio, Isabel; Asenjo Araque, Nuria; Hurtado Murillo, Felipe; Fernández Rodríguez, María; Vidal Hagemeijer, Ángela; Moreno-Pérez, Oscar; Lucio Pérez, María Jesús; López Siguero, Juan Pedro

2015-10-01

Gender dysphoria (GD) in childhood and adolescence is a complex condition where early detection and comprehensive treatment are essential to improve quality of life, decrease mental comorbidity, and improve GD. In this position statement, the Working Group on Gender Identity and Sexual Development of the Spanish Society of Endocrinology and Nutrition (GIDSEEN), consisting of specialists in Endocrinology, Psychology, Psychiatry, Pediatrics and Sociology, sets out recommendations for evaluation and treatment of GD in children and adolescents. Interdisciplinary management of GD should be carried out at specialized units (UTIGs), considering that any clinical intervention should follow the principles of scientific rigor, experience, ethical and deontological principles, and the necessary caution in front of chronic, aggressive, and irreversible treatments. Copyright © 2015 SEEN. Published by Elsevier España, S.L.U. All rights reserved.