Unusual rise in mercury-resistant bacteria in coastal environs

Digital Repository Service at National Institute of Oceanography (India)

Ramaiah, N.; De, J.

A sharp rise in mercury-resistant bacteria (MRB) capable of tolerating very high concentration of Hg was observed over the last 3-4 years in the coastal environs of India. While none or negligible colony-forming units (CFU) of bacteria were counted...

Materials of All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection

International Nuclear Information System (INIS)

2005-01-01

The All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection is cyclic (in 3 year period) conference being a broad review of state of art and development of all nuclear branches cooperated with industry and other branches of national economy and public life in Poland. The conference has been divided in one plenary session and 6 problem sessions as follow: Environmental protection, earth sciences, protection of cultural objects; Industrial applications; applications in medicine, medical apparatus; measurement methods, simulations, experiment planning; radiation techniques; laboratories, metrology

Risk Analysis of Coastal hazard Considering Sea-level Rise and Local Environment in Coastal Area

Science.gov (United States)

Sangjin, P.; Lee, D. K.; KIM, H.; Ryu, J. E.; Yoo, S.; Ryoo, H.

2014-12-01

Recently, natural hazards has been more unpredictable with increasing frequency and strength due to climate change. Especially, coastal areas would be more vulnerable in the future because of sea-level rise (SLR). In case of Korea, it is surrounded by oceans and has many big cities at coastal area, thus a hazard prevention plan in coastal area is absolutely necessary. However, prior to making the plan, finding areas at risk would be the first step. In order to find the vulnerable area, local characteristics of coastal areas should also be considered along with SLR. Therefore, the objective of the research is to find vulnerable areas, which could be damaged by coastal hazards considering local environment and SLR of coastal areas. Spatial scope of the research was set up as 1km from the coastline according to the 'coastal management law' in Korea. The assessment was done up to the year of 2050, and the highest sea level rise scenario was used. For risk analysis, biophysical and socioeconomic characteristics were considered as to represent local characteristics of coastal area. Risk analysis was carried out through the combination of 'possibility of hazard' and the 'level of damages', and both of them reflect the above-mentioned regional characteristics. Since the range of inundation was narrowed down to the inundation from typhoon in this research, the possibility of inundation caused by typhoon was estimated by using numerical model, which calculated the height of storm surge considering wave, tide, sea-level pressure and SLR. Also the level of damage was estimated by categorizing the socioeconomic character into four factors; human, infrastructure, ecology and socioeconomic. Variables that represent each factor were selected and used in damage estimation with their classification and weighting value. The result shows that the urban coastal areas are more vulnerable and hazardous than other areas because of socioeconomic factors. The east and the south coast are

Canadian coastal environments, shoreline processes, and oil spill cleanup

International Nuclear Information System (INIS)

Owens, E.H.

1994-03-01

The coastal zone is a dynamic environment, so that in developing practical and effective oil spill response strategies it is necessary to understand the forces that contribute to shore-zone processs. The coasts of Canada encompass a wide range of environments and are characterized by a variety of shoreline types that include the exposed, resistant cliffs of eastern Newfoundland and the sheltered marshes of the Beaufort Sea. A report is presented to provide an understanding of the dynamics and physical processes as they vary on the different coasts of Canada, including the Great Lakes. An outline of the general character and processes on a regional basis describes the coastal environments and introduces the literature that can be consulted for more specific information. The likely fate and persistence of oil that reaches the shoreline is discussed to provide the framework for development of spill response strategies and for the selection of appropriate shoreline cleanup or treatment countermeasures. Lessons learned from recent experience with major oil spills and field experiments are integrated into the discussion. Separate abstracts have been prepared for each of the four sections of this report. 502 refs., 5 figs

Polish economic clusters and their efforts to protect the environment – selected examples

Directory of Open Access Journals (Sweden)

Dyrda-Muskus Joanna

2014-01-01

Full Text Available This paper presents the benefits they can obtain business which aim to protect the environment. The environment protection has found its place and affects the process of systemic change of the Polish economy. This article assumes that building a competitive economy and enterprise development based on the principle of sustainable development requires the development of mechanisms for mutual benefits. These will be the economic mechanisms, technical and technological, and social. All these mechanisms are concentrated in clusters. Pursue sustainable development policies, an emphasis on environmental protection will be the general element for them a competitive advantage. Sustainable development will in this case be both the agent and the goal of economic and entrepreneurship development. Basing on the assumption that economic development is possible through the achievement of competitive advantage, sustainable development should be treated as its source.

Developmental stages of chaetognaths in the coastal environs of Bombay

Digital Repository Service at National Institute of Oceanography (India)

Ramaiah, Neelam; Nair, V.R.

Abundances of developmental stages-juveniles, developing and mature-of Sagitta bedoti, S. oceania, S. enflata and S. robusta were recorded from the coastal, estuarine and creek environs of Bombay (Maharashtra, India) from October 1985 to September...

Advancing Sustainable Development through Understanding the Coastal Environment: The Garolim Bay in the West Coast of Korea.

Science.gov (United States)

Park, M. J.

2017-12-01

The coastal environment worldwide is increasingly more populated and developed in recent years. As a result, the natural coastal environment which often provides habitats for various plants and animals and nursery grounds for fishes has become scarce. However, it is well-known that the natural coastal environment is important for the well-being of the ecosystem including human. In addition, it may contribute to the local economy by attracting many visitors who like to appreciate and enjoy the nature. Although there may be efforts to preserve the natural coastal environment by governments and environmental groups, there may be also needs to develop the coastal environment. In order to preserve the natural environment without sacrificing the local economy, it would be important to appreciate the unique characteristics of the coastal environment that may contribute to attracting many visitors. In this study, we discuss some unique characteristics of the coastal environment located in the west coast of Korea facing the eastern Yellow Sea. The Garolim Bay is a semi-enclosed bay with the narrow opening of about 2 km and the length of about 20 km, and has a spring tidal range over 6 m. It is well known for vast tidal flats and healthy ecosystems that supports high productive and diverse marine lives including spotted seals. The tidal wave propagates north along the eastern Yellow Sea and currents become strong off the Garolim Bay due to the promontory effect and mixing of the water column results in cooling of surface water. Due to its characteristic offshore environment, narrow opening and abrupt turning over 120 degrees in the midst of acceleration of strong currents, the Garolim Bay presents the unique physical and geological environment resulting in characteristic physical, biological and geological features. In fact, the name of the bay `Garolim' meaning 'Dew-induced Forest', may have resulted from these unique physical and geological characteristics of the bay.

The Civitavecchia Coastal Environment Monitoring System (C-CEMS): an integrated approach to the study of coastal oceanographic processes

Science.gov (United States)

Marcelli, Marco; Piermattei, Viviana; Madonia, Alice; Bonamano, Simone; Martellucci, Riccardo; Pierattini, Alberto; Albani, Marta; Borsellino, Chiara; Zappalà, Giuseppe

2015-04-01

The study of the physical and biological processes of the coastal environment, characterized by high spatial and time variability, requires the adoption of multidisciplinary strategies of investigation that takes into account, not only the biotic and abiotic components of coastal marine ecosystems, but also the terrestrial, atmospheric and hydrological features linked to them. The understanding of coastal environment is fundamental to face efficiently and effectively the pollution phenomena, as expected by Marine Strategy (2008/56 EC) Directive, which is focused on the achievement of GES by 2020 in all Member States. Following these lines, the Laboratory of Experimental Oceanology and Marine Ecology (University of Tuscia) has developed a multi-platform observing network (the Civitavecchia Coastal Environment Monitoring System, C-CEMS) that operates since 2005 in the coastal marine area of Civitavecchia (northern Tyrrhenian Sea, Italy), where multiple uses (industrial, commercial and tourist activities) and high ecological values (Posidonia oceanica meadows, hard-bottom benthic communities, priority species, etc.) closely coexist. Furthermore, in the last years the Civitavecchia harbour, which is one of the main ports of Europe, has been subjected to a series of expansion works that could impact significantly on the coastal environment. The C-CEMS, implemented in the current configuration, is composed by five main modules (fixed stations, in-situ measurements and samplings, satellite observations, numerical models, GIS) which provide integrated informations to be used in different fields of the environmental research. The fixed stations system controls one weather, two water quality and two wave-buoy stations along the coast. In addition to the long term observations acquired by the fixed stations (L-TER), in situ surveys are periodically carried out for the monitoring of the physical, chemical and biological characteristics of the water column and marine sediments

Advancing UAS methods for monitoring coastal environments

Science.gov (United States)

Ridge, J.; Seymour, A.; Rodriguez, A. B.; Dale, J.; Newton, E.; Johnston, D. W.

2017-12-01

Utilizing fixed-wing Unmanned Aircraft Systems (UAS), we are working to improve coastal monitoring by increasing the accuracy, precision, temporal resolution, and spatial coverage of habitat distribution maps. Generally, multirotor aircraft are preferred for precision imaging, but recent advances in fixed-wing technology have greatly increased their capabilities and application for fine-scale (decimeter-centimeter) measurements. Present mapping methods employed by North Carolina coastal managers involve expensive, time consuming and localized observation of coastal environments, which often lack the necessary frequency to make timely management decisions. For example, it has taken several decades to fully map oyster reefs along the NC coast, making it nearly impossible to track trends in oyster reef populations responding to harvesting pressure and water quality degradation. It is difficult for the state to employ manned flights for collecting aerial imagery to monitor intertidal oyster reefs, because flights are usually conducted after seasonal increases in turbidity. In addition, post-storm monitoring of coastal erosion from manned platforms is often conducted days after the event and collects oblique aerial photographs which are difficult to use for accurately measuring change. Here, we describe how fixed wing UAS and standard RGB sensors can be used to rapidly quantify and assess critical coastal habitats (e.g., barrier islands, oyster reefs, etc.), providing for increased temporal frequency to isolate long-term and event-driven (storms, harvesting) impacts. Furthermore, drone-based approaches can accurately image intertidal habitats as well as resolve information such as vegetation density and bathymetry from shallow submerged areas. We obtain UAS imagery of a barrier island and oyster reefs under ideal conditions (low tide, turbidity, and sun angle) to create high resolution (cm scale) maps and digital elevation models to assess habitat condition

Hydrochemical and physical processes influencing salinization and freshening in Mediterranean low-lying coastal environments

NARCIS (Netherlands)

Mollema, P.N.; Antonelli, M.; Dinelli, E.; Gabbianelli, G.; Greggio, N.; Stuijfzand, P.J.

2013-01-01

Ground- and surface water chemistry and stable isotope data from the coastal zone near Ravenna (Italy) have been examined to determine the geochemical conditions and processes that occur and their implications for fresh water availability in the various brackish/saline coastal environments. Fresh

Quantum Fingerprint-Based Air Quality Monitoring in Coastal Environments, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Coastal environments vital to our nation are strongly impacted by natural and human factors and are also sensitive to global climate change. A need exists for...

137Cs activity and associated dose in the coastal marine environment of India

International Nuclear Information System (INIS)

Verma, G.P.; Sharma, D.N.; Jha, S.K.

2010-01-01

Coastal marine environment is important for India since a considerable percentage of the human population resides in coastal areas. Fallout radionuclides as well as non-radioactive substances have polluted the coastal marine environment of India. The introduction of 137 Cs, a fallout radionuclide, considered as global pollutant, into marine environment has created the need for marine environmental data. The main objective is to provide data on the present level of 137 Cs which is important from the standpoint of radiological health and dose associated with it. Such database will also provide benchmark which will be helpful in assessing the impact of additional contribution to marine radioactivity in the future. The results confirm that the mean annual individual dose from 137 Cs in seafood (fish) for the Indian subcontinent is 0.03 μSv. The highest annual individual dose for 137 Cs due to the ingestion offish is in the age group of 40 to 59 years which is due to the reason that the Indian annual dietary intake of fish is highest in this age group

Prevalence of microplastics in Singapore's coastal marine environment

International Nuclear Information System (INIS)

Ng, K.L.; Obbard, J.P. . E-mail esejpo@nus.edu.sg

2006-01-01

Microplastics have been recently identified as marine pollutants of significant concern due to their persistence, ubiquity and potential to act as vectors for the transfer and exposure of persistent organic pollutants to marine organisms. This study documents, for the first time, the presence and abundance of microplastics (>1.6 μm) in Singapore's coastal environment. An optimized sampling protocol for the collection and analysis of microplastics was developed, and beach sediments and seawater (surface microlayer and subsurface layer) samples were collected from nine different locations around the coastline. Low density microplastics were separated from sediments by flotation and polymer types were identified using Fourier transform infrared (FTIR) spectrometry. Synthetic polymer microplastics identified in beach sediments included polyethylene, polypropylene, polystyrene, nylon, polyvinyl alcohol and acrylonitrile butadiene styrene. Microplastics were detected in samples from four out of seven beach environments, with the greatest quantity found in sediments from two popular beaches in the eastern part of Singapore. Polyethylene, polypropylene and polystyrene microplastics were also found in the surface microlayer (50-60 μm) and subsurface layer (1 m) of coastal waters. The presence of microplastics in sediments and seawater is likely due to on-going waste disposal practices from industries and recreational activities, and discharge from shipping

Free-space optical channel characterization in a coastal environment

KAUST Repository

Alheadary, Wael Ghazy

2017-12-28

Recently, FSO (Free-Space Optical Communication) has received a lot of attention thanks to its high data-rate transmission via unbounded unlicensed bandwidth. However, some weather conditions lead to significant degradation of the FSO link performance. Based on this context and in order to have a better understanding of the capabilities of FSO communication in a coastal environment, the effects of temperature and humidity on an FSO system are investigated in this study. An experiment is conducted using an open source FSO system that achieves a transmission rate of 1 Gbit/s at a distance of 70 m. Two new mathematical models are proposed to represent the effects of temperature and humidity on our developed FSO system operating at a wavelength of 1 550 nm. The first model links the FSO attenuation coeffcient to the air temperature in coastal regions, while the second model links the FSO attenuation coeffcient to the humidity and the dew-point temperature. The key finding of this study is that FSO links can achieve maximum availability in a coastal city with normal variations in temperature and humidity.

Ecological aspects of nuclear power plants in coastal environment

International Nuclear Information System (INIS)

Lebreton, P.

1976-01-01

A review is presented about ecological effects of giant nuclear Power Plants (ca. 5,000 MWe) on coastal environment. From short to long time, the problems concern the following points of view: - physical: (sitology; necessity of ecological mapping); - mechanical: (the cooling systems. 'Courantology'. Disturbance of marine micro- and macro-organisms); - thermal: (the heated discharges; thermal pollution. Effects on dissolved chemicals and marine organisms. Acquaculture and its limits); - chemical and radiochemical: (synergistic pollutions. Chlorine vs. fouling. Acute or chronic radioactive effluents; concentration by food chains). The conclusions emphasize the necessity of 'pluridisciplinarity' and 'zero-point' definition. Three ecological categories can be distinguished on the basis of water physical turn-over; to this categories correspond various standards and recommandations for management of nuclear Power Plants in coastal zones [fr

Polish-Bulgarian-Russian, Bulgarian-Polish-Russian or Russian-Bulgarian-Polish dictionary?

Directory of Open Access Journals (Sweden)

Violetta Koseska-Toszewa

2015-11-01

Full Text Available Polish-Bulgarian-Russian, Bulgarian-Polish-Russian or Russian-Bulgarian-Polish dictionary? The trilingual dictionary (M. Duszkin, V. Koseska, J. Satoła and A. Tzoneva is being elaborated based on a working Polish-Bulgarian-Russian electronic parallel corpus authored by Maksim Duszkin, Violetta Koseska-Toszewa and Joanna Satoła-Staśkowiak, and works by A. Tzoneva. It is the first corpus comparing languages belonging to three different Slavic language groups: western, southern and eastern. Works on the dictionary are based on Gramatyka konfrontatywna bułgarsko-polska (Bulgarian-Polish confrontative grammar and the proposed there semantic-oriented interlanguage. Two types of classifiers have been introduced into the dictionary: classic and semantic. The trilingual dictionary will present a consistent and homogeneous set of facts of grammar and semantics. The Authors point out that in a traditional dictionary it is not clear for example whether aspect should be understood as imperfective / perfective form of a verb or as its meaning. Therefore in the dictionary forms and meaning are separated in a regular way. Imperfective verb form has two meanings: state and configuration of states and events culminating in state. Also perfective verb form has two meanings: event and configuration of states and events culminating in event. These meanings are described by the semantic classifiers, respectively, state and event, state1 and event1. The way of describing language units, mentioned in the article, gives a possibility to present language material (Polish, Bulgarian, Russian in any required order, hence the article’s title.

Type A natural resource damage assessment models for Great Lakes environments (NRDAM/GLE) and coastal and marine environments (NRDAM/CME)

International Nuclear Information System (INIS)

French, D.P.; Reed, M.

1993-01-01

A computer model of the physical fates, biological effects, and economic damages resulting from releases of oil and other hazardous materials has been developed by ASA to be used in Type A natural resource damage assessments under the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). Natural Resource Damage Assessment Models for Great Lakes Environments (NRDAM/GLE) and for Coastal and Marine Environments (NRDAM/GLE) and for Coastal and Marine Environments (NRDAM/CME) will become available. These models will also support NOAA's damage assessment regulations under the Oil Pollution Act of 1990. The physical and biological models are three-dimensional. Direct mortality from toxic concentrations and oiling, impacts of habitat loss, and food web losses are included in the model. Estimation of natural resource damages is based both on the lost value of injured resources and on the costs for restoration or replacement of those resources. A coupled geographical information system (GIS) allows gridded representation of complex coastal boundaries, variable bathymetry, shoreline types, and multiple biological habitats. The models contain environmental, geographical, chemical, toxicological, biological, restoration and economic databases with the necessary information to estimate damages. Chemical and toxicological data are included for about 470 chemicals and oils. Biological data are unique to 77 coastal and marine plus 11 Great Lakes provinces, and to habitat type. Restoration and economic valuations are also regionally specific

Coastal acid sulphate soils in Poland: a review

Directory of Open Access Journals (Sweden)

Hulisz Piotr

2017-03-01

Full Text Available This paper presents the state of knowledge on coastal acid sulphate soils in Poland. The properties of these soils are closely related to the influence of brackish water from the Baltic Sea, high accumulation of organic matter and human activity. The obtained results demonstrate that the sulphide accumulation in soils refers to a relatively small areas of the Polish coastal zone with the unique and very valuable habitats. They require an adequate regulation of the water relations to avoid the risk of strong soil acidification and environmental pollution by heavy metals. Currently, there are no relevant criteria for classification of acid sulphate soil materials in the Polish Soil Classification (2011. Therefore, based on the presented data, the authors proposed to identify these features at the lower classification level (for different soil types. The criteria for the Thionic and Sulfidic qualifiers used in the WRB classification (IUSS Working Group WRB 2015 could be accepted for this purpose.

Erosion reasons and rate on accumulative Polish dune coast caused by the January 2012 storm surge

Directory of Open Access Journals (Sweden)

Tomasz A. Łabuz

2014-03-01

Full Text Available The Polish coast is a non-tidal area; its shores are affected mainly by autumn-winter storm surges. Those of 6 and 14 January 2012 are representative of the forces driving the erosion of normally accumulative sections of coastal dunes, monitored by the author since 1997. The sea level maximum during these two storm surges reached 1.2 to 1.5 m amsl along the Polish coast. Land forms up to 3 m amsl were inundated. Beaches and low parts of the coast up to this height were rebuilt by sea waves attacking the coast for almost 12 days. Quantitative analyses of the morphological dynamics of the coastal dunes are presented for 57 profiles located along the coast. Only those accumulative sections of the Polish coast are analysed where sand accumulation did occur and led to new foredune development. The mean rate of dune erosion was 2.5 m3 per square metre with an average toe retreat of 1.4 m. Erosion understood as dune retreat was greater when a beach was lower (correlation coefficient 0.8. Dune erosion did not occur on coasts with beaches higher than 3.2 m or on lower ones covered by embryo dunes.

Fate of petroleum hydrocarbons and toxic organics in Louisiana coastal environments

International Nuclear Information System (INIS)

DeLaune, R.D.; Gambrell, R.P.; Pardue, J.H.; Patrick, W.H. Jr.

1991-01-01

Numerous potentially toxic compounds are entering Louisiana's inshore and nearshore coastal environments. To a large degree there is insufficient information for predicting the fate and effect of these materials in aquatic environments. Studies documenting the impact of petroleum hydrocarbons entering Louisiana coastal wetlands are summarized. Also included are research findings on factors affecting the persistence of petroleum hydrocarbons and other toxic organics (pentachlorophenol (PCP), 2,4-dichlorophenoxyacetic acid (2,4-D), creosote, etc.) in sediment-water systems. Sediment pH and redox conditions have been found to play an important role in the microbial degradation of toxic organics. Most of the hydrocarbons investigated degrade more rapidly under high redox (aerobic) conditions although there are exceptions (e.g., 1,1,1-trichloro-2,2-bis(4-chlorophenyl)(DDT) and polychlorobiphenyls (PCBs)). Some of these compounds, due to their slow degradation in anaerobic sediment, may persist in the system for decades

Mercury in precipitation at an urbanized coastal zone of the Baltic Sea (Poland).

Science.gov (United States)

Saniewska, Dominika; Bełdowska, Magdalena; Bełdowski, Jacek; Falkowska, Lucyna

2014-11-01

Wet deposition is an important source of metals to the sea. The temporal variability of Hg concentrations in precipitation, and the impact of air masses of different origins over the Polish coastal zone were assessed. Samples of precipitation were collected (August 2008-May 2009) at an urbanized coastal station in Poland. Hg analyses were conducted using CVAFS. These were the first measurements of Hg concentration in precipitation obtained in the Polish coastal zone. Since Poland was identified as the biggest emitter of Hg to the Baltic, these data are very important. In the heating and non-heating season, Hg concentrations in precipitation were similar. Hg wet deposition flux dominated in summer, when the production of biomass in the aquatic system was able to actively adsorb Hg. Input of metal to the sea was attributed to regional and distant sources. Maritime air masses, through transformation of Hg(0), were an essential vector of mercury in precipitation.

The Civitavecchia Coastal Environment Monitoring System (C-CEMS): a new tool to analyze the conflicts between coastal pressures and sensitivity areas

Science.gov (United States)

Bonamano, S.; Piermattei, V.; Madonia, A.; Paladini de Mendoza, F.; Pierattini, A.; Martellucci, R.; Stefanì, C.; Zappalà, G.; Caruso, G.; Marcelli, M.

2016-01-01

The understanding of the coastal environment is fundamental for efficiently and effectively facing the pollution phenomena as expected by the Marine Strategy Framework Directive, and for limiting the conflicts between anthropic activities and sensitivity areas, as stated by Maritime Spatial Planning Directive. To address this, the Laboratory of Experimental Oceanology and Marine Ecology developed a multi-platform observing network that has been in operation since 2005 in the coastal marine area of Civitavecchia (Latium, Italy) where multiple uses and high ecological values closely coexist. The Civitavecchia Coastal Environment Monitoring System (C-CEMS), implemented in the current configuration, includes various components allowing one to analyze the coastal conflicts by an ecosystem-based approach. The long-term observations acquired by the fixed stations are integrated with in situ data collected for the analysis of the physical, chemical and biological parameters of the water column, sea bottom and pollution sources detected along the coast. The in situ data, integrated with satellite observations (e.g., temperature, chlorophyll a and TSM), are used to feed and validate the numerical models, which allow the analysis and forecasting of the dynamics of pollutant dispersion under different conditions. To test the potential capabilities of C-CEMS, two case studies are reported here: (1) the analysis of fecal bacteria dispersion for bathing water quality assessment, and (2) the evaluation of the effects of the dredged activities on Posidonia meadows, which make up most of the two sites of community importance located along the Civitavecchia coastal zone. The simulation outputs are overlapped by the thematic maps showing bathing areas and Posidonia oceanica distribution, thus giving a first practical tool that could improve the resolution of the conflicts between coastal uses (in terms of stress produced by anthropic activities) and sensitivity areas.

Flow-structure-seabed interactions in coastal and marine environments

DEFF Research Database (Denmark)

Sumer, B. Mutlu

2014-01-01

Flow–structure–seabed interaction in coastal and marine environments is a rapidly growing area of research and applications. In this vision paper, this area is discussed with a view of identifying its state of the art and current research challenges. The discussion draws attention to key issues......, among other areas, as an emerging branch of Marine Civil Engineering. Predictions of the field development for the forthcoming years are also briefly outlined....

Adaptions of ArcGIS' Linear Referencing System to the Coastal Environment

DEFF Research Database (Denmark)

Balstrøm, Thomas

2008-01-01

For many years it has been problematic to store information for the coastal environment in a GIS. However, a system named "Linear referencing System" based upon a dynamic segmentation principle implemented in ESRIs ArcGIS 9 software has now made it possible to store and analyze information...

Coastal zones : shifting shores, sharing adaptation strategies for coastal environments

Energy Technology Data Exchange (ETDEWEB)

Hay, J.E. [Waikato Univ. (New Zealand); Morneau, F.; Savard, J.P. [Ouranos, Montreal, PQ (Canada); Madruga, R.P. [Centre of Investigation on the Global Economy (Cuba); Leslie, K.R. [Caribbean Community Climate Change Centre (Belize); Agricole, W. [Ministry of Environment and Natural Resources (Seychelles); Burkett, V. [United States Geological Survey (United States)

2006-07-01

A parallel event to the eleventh Conference of Parties (COP) to the United Nations Framework Convention of Climate Change was held to demonstrate examples of adaptation from around the world in the areas of food security, water resources, coastal zones, and communities/infrastructure. Panels on each theme presented examples from developing countries, countries in economic transition, and developed countries. These 4 themes were chosen because both mitigation and adaptation are essential to meeting the challenge of climate change. The objective of the event was to improve the knowledge of Canada's vulnerabilities to climate change, identify ways to minimize the negative effects of future impacts, and explore opportunities that take advantage of any positive impacts. This third session focused on how coastal communities are adapting to climate change in such places as Quebec, the Caribbean, and small Island States. It also presented the example of how a developed country became vulnerable to Hurricane Katrina which hit the coastal zone in the United States Gulf of Mexico. The presentations addressed the challenges facing coastal communities along with progress in risk assessment and adaptation both globally and in the Pacific. Examples of coastal erosion in Quebec resulting from climate change were presented along with climate change and variability impacts over the coastal zones of Seychelles. Cuba's vulnerability and adaptation to climate change was discussed together with an integrated operational approach to climate change, adaptation, biodiversity and land utilization in the Caribbean region. The lessons learned from around the world emphasize that adaptation is needed to reduce unavoidable risks posed by climate change and to better prepare for the changes ahead. refs., tabs., figs.

Erosion and its rate on an accumulative Polish dune coast: the effects of the January 2012 storm surge

OpenAIRE

Łabuz, Tomasz A.

2014-01-01

The Polish coast is a non-tidal area; its shores are affected mainly by autumn-winter storm surges. Those of 6 and 14 January 2012 are representative of the forces driving the erosion of normally accumulative sections of coastal dunes, monitored by the author since 1997. The sea level maximum during these two storm surges reached 1.2 to 1.5 m amsl along the Polish coast. Land forms up to 3 m amsl were inundated. Beaches and low parts of the coast up to this height were rebuilt by sea waves at...

Estimation of potential evapotranspiration of a coastal savannah environment; comparison of methods

International Nuclear Information System (INIS)

Asare, D.K.; Ayeh, E.O.; Amenorpe, G.; Banini, G.K.

2011-01-01

Six potential evapotranspiration models namely, Penman-Monteith, Hargreaves-Samani , Priestley-Taylor, IRMAK1, IRMAK2 and TURC, were used to estimate daily PET values at Atomic-Kwabenya in the coastal savannah environment of Ghana for the year 2005. The study compared PET values generated by six models and identified which ones compared favourably with the Penman-Monteith model which is the recommended standard method for estimating PET. Cross comparison analysis showed that only the daily estimates of PET of Hargreaves-Samani model correlated reasonably (r = 0.82) with estimates by the Penman-Monteith model. Additionally, PET values by the Priestley-Taylor and TURC models were highly correlated (r = 0.99) as well as those generated by IRMAK2 and TURC models (r = 0.96). Statistical analysis, based on pair comparison of means, showed that daily PET estimates of the Penman-Monteith model were not different from the Priestley-Taylor model for the Kwabenya-Atomic area located in the coastal savannah environment of Ghana. The Priestley-Taylor model can be used, in place of the Penman-Monteith model, to estimate daily PET for the Atomic-Kwabenya area of the coastal savannah environment of Ghana. The Hargreaves-Samani model can also be used to estimate PET for the study area because its PET estimates correlated reasonably with those of the Penman-Monteith model (r = 0.82) and requires only air temperature measurements as inputs. (au)

Geochemistry of shallow ground water in coastal plain environments in the southeastern United States: implications for aquifer susceptibility

International Nuclear Information System (INIS)

Tesoriero, Anthony J.; Spruill, Timothy B.; Eimers, Jo L.

2004-01-01

Ground-water chemistry data from coastal plain environments have been examined to determine the geochemical conditions and processes that occur in these areas and assess their implications for aquifer susceptibility. Two distinct geochemical environments were studied to represent a range of conditions: an inner coastal plain setting having more well-drained soils and lower organic carbon (C) content and an outer coastal plain environment that has more poorly drained soils and high organic C content. Higher concentrations of most major ions and dissolved inorganic and organic C in the outer coastal plain setting indicate a greater degree of mineral dissolution and organic matter oxidation. Accordingly, outer coastal plain waters are more reducing than inner coastal plain waters. Low dissolved oxygen (O 2 ) and nitrate (NO 3 - ) concentrations and high iron (Fe) concentrations indicate that ferric iron (Fe (III)) is an important electron acceptor in this setting, while dissolved O 2 is the most common terminal electron acceptor in the inner coastal plain setting. The presence of a wide range of redox conditions in the shallow aquifer system examined here underscores the importance of providing a detailed geochemical characterization of ground water when assessing the intrinsic susceptibility of coastal plain settings. The greater prevalence of aerobic conditions in the inner coastal plain setting makes this region more susceptible to contamination by constituents that are more stable under these conditions and is consistent with the significantly (p 3 - found in this setting. Herbicides and their transformation products were frequently detected (36% of wells sampled), however concentrations were typically low (<0.1 μg/L). Shallow water table depths often found in coastal plain settings may result in an increased risk of the detection of pesticides (e.g., alachlor) that degrade rapidly in the unsaturated zone

External dose rates in coastal urban environments in Brazil

International Nuclear Information System (INIS)

Souza, E.M.; Rochedo, E.R.R.; Conti, C.C.

2015-01-01

A long term activity aiming on assessing the exposure of the Brazilian population to natural background radiation is being developed at IRD/CNEN. Several research groups within IRD work in this activity, although mostly as a parallel work associated to main research lines followed by researches of the institution. One main activity is related to the raise of external gamma dose rates throughout the country. The objective of this work is to present results from recent surveys performed as part of the emergency preparedness for radiological emergencies during major public events in Brazil, such as the the World Youth Day, held in Rio de Janeiro in 2013, and the Confederations Cup and the FIFA World Cup soccer games, in 2013 and 2014, respectively. In this work, only the recent (2014) coastal urban environments measurements were included. Average kerma rates for Fortaleza is 80 ± 23 nGy/h, for Vitoria is 96 ± 33 nGy/h and for Angra dos Reis is 147 ± 16 nGy/h. These results are then compared to previous results on other coastal urban towns (Rio de Janeiro, Niterói and Salvador), and with the high background coastal area of Guarapari town. (authors)

Erosion and its rate on an accumulative Polish dune coast: the effects of the January 2012 storm surge

Directory of Open Access Journals (Sweden)

Tomasz A. Łabuz

2014-01-01

Full Text Available The Polish coast is a non-tidal area; its shores are affected mainly by autumn-winter storm surges. Those of 6 and 14 January 2012 are representative of the forces driving the erosion of normally accumulative sections of coastal dunes, monitored by the author since 1997. The sea level maximum during these two storm surges reached 1.2 to 1.5 m amsl along the Polish coast. Land forms up to 3 m amsl were inundated. Beaches and low parts of the coast up to this height were rebuilt by sea waves attacking the coast for almost 12 days. Quantitative analyses of the morphological dynamics of the coastal dunes are presented for 57 profiles located along the coast. Only those accumulative sections of the Polish coast are analysed where sand accumulation did occur and led to new foredune development. The mean rate of dune erosion was 2.5 m3 per square metre with an average toe retreat of 1.4 m. Erosion understood as dune retreat was greater when a beach was lower (correlation coefficient 0.8. Dune erosion did not occur on coasts with beaches higher than 3.2 m or on lower ones covered by embryo dunes.

Climate change and agricultural development: adapting Polish agriculture to reduce future nutrient loads in a coastal watershed.

Science.gov (United States)

Piniewski, Mikołaj; Kardel, Ignacy; Giełczewski, Marek; Marcinkowski, Paweł; Okruszko, Tomasz

2014-09-01

Currently, there is a major concern about the future of nutrient loads discharged into the Baltic Sea from Polish rivers because they are main contributors to its eutrophication. To date, no watershed-scale studies have properly addressed this issue. This paper fills this gap by using a scenario-modeling framework applied in the Reda watershed, a small (482 km²) agricultural coastal area in northern Poland. We used the SWAT model to quantify the effects of future climate, land cover, and management changes under multiple scenarios up to the 2050s. The combined effect of climate and land use change on N-NO3 and P-PO4 loads is an increase by 20-60 and 24-31 %, respectively, depending on the intensity of future agricultural usage. Using a scenario that assumes a major shift toward a more intensive agriculture following the Danish model would bring significantly higher crop yields but cause a great deterioration of water quality. Using vegetative cover in winter and spring (VC) would be a very efficient way to reduce future P-PO4 loads so that they are lower than levels observed at present. However, even the best combination of measures (VC, buffer zones, reduced fertilization, and constructed wetlands) would not help to remediate heavily increased N-NO3 loads due to climate change and agricultural intensification.

A multi-sensor oceanographic measurement system for coastal environments

Science.gov (United States)

Martini, Marinna A.; Strahle, William J.

1993-01-01

An instrument system has been developed for long-term sediment transport studies that uses a modular design to combine off the shelf components into a complete and flexible package. A common data storage format is used in each instrument system so that the same hardware can be assembled in different ways to address specific scientific studies with minimal engineering support and modification. Three systems have been constructed and successfully deployed to date in two different coastal environments.

Materials of All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection

International Nuclear Information System (INIS)

1998-01-01

The All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection is cyclic (in 3 year period) conference being a broad review of state of art and development of all nuclear branches cooperated with industry and other branches of national economy and public life in Poland. The conference has been divided in one plenary session and 8 problem sessions as follow: Radiation technologies of flue gas purification; radiation technologies in food and cosmetic industry; application of nuclear techniques in environmental studies and earth science; radiometric methods in material engineering; isotope tracers in biological studies and medical diagnostics; radiometric industrial measuring systems; radiation detectors and device; nuclear methods in cultural objects examination. The poster section as well as small exhibition have been also organised

[The marine coastal water monitoring program of the Italian Ministry of the Environment].

Science.gov (United States)

Di Girolamo, Irene

2003-01-01

The Ministry of the Environment carries out marine and coastal monitoring programs with the collaboration of the coastal Regions. The program in progress (2001-2003), on the basis of results of the previous one, has identified 73 particulary significant areas (57 critical areas and 16 control areas). The program investigates several parameters on water, plancton, sediments, mollusks and benthos with analyses fortnightly, six-monthly and annual. The main aim of these three year monitoring programs is to assess the quality of national marine ecosystem.

Preface: Remote Sensing in Coastal Environments

Directory of Open Access Journals (Sweden)

Deepak R. Mishra

2016-08-01

Full Text Available The Special Issue (SI on “Remote Sensing in Coastal Environments” presents a wide range of articles focusing on a variety of remote sensing models and techniques to address coastal issues and processes ranging for wetlands and water quality to coral reefs and kelp habitats. The SI is comprised of twenty-one papers, covering a broad range of research topics that employ remote sensing imagery, models, and techniques to monitor water quality, vegetation, habitat suitability, and geomorphology in the coastal zone. This preface provides a brief summary of each article published in the SI.

The Hudson River Plume: Exploring Human Impact on the Coastal Environment

Science.gov (United States)

McDonnell, Janice; Duncan, Ravit; Lichtenwalner, C. Sage; Dunbar, Laura

2010-01-01

The Hudson River Watershed contains a variety of geologic, topographic, climatic, and hydrologic features and a diversity of land-use patterns--making it an ideal model for studying human impact on the coastal environment. In this article, the authors present the Hudson River Plume (HRP), a problem-based online module that explores nonpoint-source…

Management of Ecological-Economic Processes of Pollution Accumulation and Assimilation in the Coastal Zone Marine Environment

Directory of Open Access Journals (Sweden)

I.E. Timchenko

2017-02-01

Full Text Available A model for managing the balance of pollution (getting into the sea with the coastal runoff assimilation and accumulation, based on the negative feedback between the coastal economic system efficiency and penalties for the sea coastal zone pollution is proposed. The model is constructed by the Adaptive Balance of Causes method and is intended for finding a rational balance of profit from the use of assimilative resources of the marine environment and the costs of maintaining its quality. The increase of pollutions in the coastal zone is taken as proportional to the volume of product realization. The decrease of pollution concentration is related to the environment protection activities paid for by the production. The model contains the agents for managing the volume of the economic system generalized production release. The agents control pollution accumulation rate at different ones of the bio-chemical processes resulting in the marine environment natural purification. Scenario analysis of ecological-economic processes in the “Land–Sea” system is carried out, and the dependencies of economic subsystem production profitability on penalty sanctions limiting the pollutant flux getting into the sea are constructed. Sea temperature and water mass dynamics effect on these processes is considered. The scenarios of their intra-annual variability are constructed. It is shown that the sea temperature and near-water wind consideration in the model have a significant effect on marine environment pollution level and production profitability. The conclusion is that the proposed adaptive simulation model “Sea–Land” can be used for forecasting the scenarios of coastal subsystem production processes (the volume of generalized product manufacturing, production cost, profitability in parallel with the forecast of pollution concentration in the sea scenarios.

Presence, concentrations and risk assessment of selected antibiotic residues in sediments and near-bottom waters collected from the Polish coastal zone in the southern Baltic Sea - Summary of 3years of studies.

Science.gov (United States)

Siedlewicz, Grzegorz; Białk-Bielińska, Anna; Borecka, Marta; Winogradow, Aleksandra; Stepnowski, Piotr; Pazdro, Ksenia

2018-04-01

Concentrations of selected antibiotic compounds from different groups were measured in sediment samples (14 analytes) and in near-bottom water samples (12 analytes) collected in 2011-2013 from the southern Baltic Sea (Polish coastal zone). Antibiotics were determined at concentration levels of a few to hundreds of ng g -1 d.w. in sediments and ng L -1 in near-bottom waters. The most frequently detected compounds were sulfamethoxazole, trimethoprim, oxytetracycline in sediments and sulfamethoxazole and trimethoprim in near-bottom waters. The occurrence of the identified antibiotics was characterized by spatial and temporal variability. A statistically important correlation was observed between sediment organic matter content and the concentrations of sulfachloropyridazine and oxytetracycline. Risk assessment analyses revealed a potential high risk of sulfamethoxazole contamination in near-bottom waters and of contamination by sulfamethoxazole, trimethoprim and tetracyclines in sediments. Both chemical and risk assessment analyses show that the coastal area of the southern Baltic Sea is highly exposed to antibiotic residues. Copyright © 2017 Elsevier Ltd. All rights reserved.

Bacteriological quality and solid wastes at five coastal marine environments of Costa Rica

International Nuclear Information System (INIS)

Garcia, Vera; Acuna Gonzalez, Jenaro; Vargas Zamora, Jose A.; Garcia Cespedes, Jairo

2006-01-01

Anthropogenic waste and water bacteriological quality were surveyed twice a year in 2000 and in 2002 at five coastal marine environments in Costa Rica, one in the Caribbean (Bahia de Moin) and four in the Pacific (Bahia de Culebra, Golfo de Nicoya, Estero de Puntarenas, Bahia de Golfito). The most probable number (MPN)/100 mL of coliform bacteria was calculated after incubation series of five test tubes. A total of 14 coastal and two river water samples were collected in the Caribbean, and 32 coastal, nine estuarine and one tap water samples in the Pacific, plus 25 samples investigated for Escherichia coli in 2002. The means of 2 MPN/100 mL in June 2000 and 17 MPN/100 mL in May 2002, and faecal coliforms [es

Free-space optical channel characterization and experimental validation in a coastal environment

KAUST Repository

Alheadary, Wael Ghazy

2018-03-05

Over the years, free-space optical (FSO) communication has attracted considerable research interest owing to its high transmission rates via the unbounded and unlicensed bandwidths. Nevertheless, various weather conditions lead to significant deterioration of the FSO link capabilities. In this context, we report on the modelling of the channel attenuation coefficient (β) for a coastal environment and related ambient, considering the effect of coastal air temperature (T), relative humidity (RH) and dew point (TD) by employing a mobile FSO communication system capable of achieving a transmission rate of 1 Gbps at an outdoor distance of 70 m for optical beam wavelengths of 1310 nm and 1550 nm. For further validation of the proposed models, an indoor measurement over a 1.5 m distance utilizing 1310 nm, 1550 nm, and 1064 nm lasers was also performed. The first model provides a general link between T and β, while the second model provides a relation between β, RH as well as TD. By validating our attenuation coefficient model with actual outdoor and indoor experiments, we obtained a scaling parameter x and decaying parameter c values of 19.94, 40.02, 45.82 and 0.03015, 0.04096, 0.0428 for wavelengths of 1550, 1310, 1064 nm, respectively. The proposed models are well validated over the large variation of temperature and humidity over the FSO link in a coastal region and emulated indoor environment.

Free-space optical channel characterization and experimental validation in a coastal environment

KAUST Repository

Alheadary, Wael Ghazy; Park, Kihong; Alfaraj, Nasir; Guo, Yujian; Stegenburgs, Edgars; Ng, Tien Khee; Ooi, Boon S.; Alouini, Mohamed-Slim

2018-01-01

Over the years, free-space optical (FSO) communication has attracted considerable research interest owing to its high transmission rates via the unbounded and unlicensed bandwidths. Nevertheless, various weather conditions lead to significant deterioration of the FSO link capabilities. In this context, we report on the modelling of the channel attenuation coefficient (β) for a coastal environment and related ambient, considering the effect of coastal air temperature (T), relative humidity (RH) and dew point (TD) by employing a mobile FSO communication system capable of achieving a transmission rate of 1 Gbps at an outdoor distance of 70 m for optical beam wavelengths of 1310 nm and 1550 nm. For further validation of the proposed models, an indoor measurement over a 1.5 m distance utilizing 1310 nm, 1550 nm, and 1064 nm lasers was also performed. The first model provides a general link between T and β, while the second model provides a relation between β, RH as well as TD. By validating our attenuation coefficient model with actual outdoor and indoor experiments, we obtained a scaling parameter x and decaying parameter c values of 19.94, 40.02, 45.82 and 0.03015, 0.04096, 0.0428 for wavelengths of 1550, 1310, 1064 nm, respectively. The proposed models are well validated over the large variation of temperature and humidity over the FSO link in a coastal region and emulated indoor environment.

Prevalence of microplastics in Singapore's coastal marine environment

Energy Technology Data Exchange (ETDEWEB)

Ng, K.L. [Division of Environmental Science and Engineering, Faculty of Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117576 (Singapore); Obbard, J.P. [Division of Environmental Science and Engineering, Faculty of Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore 117576 (Singapore)]. E-mail esejpo@nus.edu.sg

2006-07-15

Microplastics have been recently identified as marine pollutants of significant concern due to their persistence, ubiquity and potential to act as vectors for the transfer and exposure of persistent organic pollutants to marine organisms. This study documents, for the first time, the presence and abundance of microplastics (>1.6 {mu}m) in Singapore's coastal environment. An optimized sampling protocol for the collection and analysis of microplastics was developed, and beach sediments and seawater (surface microlayer and subsurface layer) samples were collected from nine different locations around the coastline. Low density microplastics were separated from sediments by flotation and polymer types were identified using Fourier transform infrared (FTIR) spectrometry. Synthetic polymer microplastics identified in beach sediments included polyethylene, polypropylene, polystyrene, nylon, polyvinyl alcohol and acrylonitrile butadiene styrene. Microplastics were detected in samples from four out of seven beach environments, with the greatest quantity found in sediments from two popular beaches in the eastern part of Singapore. Polyethylene, polypropylene and polystyrene microplastics were also found in the surface microlayer (50-60 {mu}m) and subsurface layer (1 m) of coastal waters. The presence of microplastics in sediments and seawater is likely due to on-going waste disposal practices from industries and recreational activities, and discharge from shipping.

Preliminary assessment of coastal erosion and local community adaptation in Sayung coastal area, central Java – Indonesia

OpenAIRE

Marfai, Muh Aris

2012-01-01

Dynamic environment in coastal area, especially due to coastal erosion process, has negative impact on human environment. Sayung coastal area, located in Central Java-Indonesia, has experienced severe impact of coastal erosion. As the result of the coastal erosion, hundreds of settlement located in coastal area has been destructed. Moreover, fishponds as the land use dominated in the coastal area also has been severely destroyed. Besides the coastal erosion, increasing of inundated area due t...

Cancer morbidity among polishers.

Science.gov (United States)

Järvholm, B; Thiringer, G; Axelson, O

1982-01-01

The mortality pattern among 86 men was determined to investigate the possible hazards of polishing steel. The men had polished steel with polishing paste for at least five years. The polishing pastes had contained tallow, beeswax, carnauba wax, alundum, carborundum, ferric oxide, and chalk. A total of 18 men had died compared with 13.3 expected. Four had died of stomach cancer compared with 0.44 expected (p less than 0.005). The mortality for other causes of death was not increased. The study does not permit any definite conclusion but indicates a possible cancer hazard among polishers. PMID:7066237

Laser polishing of 3D printed mesoscale components

International Nuclear Information System (INIS)

Bhaduri, Debajyoti; Penchev, Pavel; Batal, Afif; Dimov, Stefan; Soo, Sein Leung; Sten, Stella; Harrysson, Urban; Zhang, Zhenxue; Dong, Hanshan

2017-01-01

Highlights: • Process optimisation for laser polishing novel 3D printed SS316L parts. • Evaluating the effects of key polishing parameters on SS316L surface roughness. • Detailed spectroscopic analysis of oxide layer formation due to laser polishing. • Comparative surface integrity analysis of SS parts polished in air and argon. • A maximum reduction in roughness of over 94% achieved at optimised polishing settings. - Abstract: Laser polishing of various engineered materials such as glass, silica, steel, nickel and titanium alloys, has attracted considerable interest in the last 20 years due to its superior flexibility, operating speed and capability for localised surface treatment compared to conventional mechanical based methods. The paper initially reports results from process optimisation experiments aimed at investigating the influence of laser fluence and pulse overlap parameters on resulting workpiece surface roughness following laser polishing of planar 3D printed stainless steel (SS316L) specimens. A maximum reduction in roughness of over 94% (from ∼3.8 to ∼0.2 μm S_a) was achieved at the optimised settings (fluence of 9 J/cm"2 and overlap factors of 95% and 88–91% along beam scanning and step-over directions respectively). Subsequent analysis using both X-ray photoelectron spectroscopy (XPS) and glow discharge optical emission spectroscopy (GDOES) confirmed the presence of surface oxide layers (predominantly consisting of Fe and Cr phases) up to a depth of ∼0.5 μm when laser polishing was performed under normal atmospheric conditions. Conversely, formation of oxide layers was negligible when operating in an inert argon gas environment. The microhardness of the polished specimens was primarily influenced by the input thermal energy, with greater sub-surface hardness (up to ∼60%) recorded in the samples processed with higher energy density. Additionally, all of the polished surfaces were free of the scratch marks, pits, holes, lumps

Laser polishing of 3D printed mesoscale components

Energy Technology Data Exchange (ETDEWEB)

Bhaduri, Debajyoti, E-mail: debajyoti.bhaduri@gmail.com [Department of Mechanical Engineering, School of Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom); Penchev, Pavel; Batal, Afif; Dimov, Stefan; Soo, Sein Leung [Department of Mechanical Engineering, School of Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom); Sten, Stella; Harrysson, Urban [Digital Metal, Höganäs AB, 263 83 Höganäs (Sweden); Zhang, Zhenxue; Dong, Hanshan [School of Metallurgy and Materials, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom)

2017-05-31

Highlights: • Process optimisation for laser polishing novel 3D printed SS316L parts. • Evaluating the effects of key polishing parameters on SS316L surface roughness. • Detailed spectroscopic analysis of oxide layer formation due to laser polishing. • Comparative surface integrity analysis of SS parts polished in air and argon. • A maximum reduction in roughness of over 94% achieved at optimised polishing settings. - Abstract: Laser polishing of various engineered materials such as glass, silica, steel, nickel and titanium alloys, has attracted considerable interest in the last 20 years due to its superior flexibility, operating speed and capability for localised surface treatment compared to conventional mechanical based methods. The paper initially reports results from process optimisation experiments aimed at investigating the influence of laser fluence and pulse overlap parameters on resulting workpiece surface roughness following laser polishing of planar 3D printed stainless steel (SS316L) specimens. A maximum reduction in roughness of over 94% (from ∼3.8 to ∼0.2 μm S{sub a}) was achieved at the optimised settings (fluence of 9 J/cm{sup 2} and overlap factors of 95% and 88–91% along beam scanning and step-over directions respectively). Subsequent analysis using both X-ray photoelectron spectroscopy (XPS) and glow discharge optical emission spectroscopy (GDOES) confirmed the presence of surface oxide layers (predominantly consisting of Fe and Cr phases) up to a depth of ∼0.5 μm when laser polishing was performed under normal atmospheric conditions. Conversely, formation of oxide layers was negligible when operating in an inert argon gas environment. The microhardness of the polished specimens was primarily influenced by the input thermal energy, with greater sub-surface hardness (up to ∼60%) recorded in the samples processed with higher energy density. Additionally, all of the polished surfaces were free of the scratch marks, pits, holes

Geospatial characteristics of Florida's coastal and offshore environments: Distribution of important habitats for coastal and offshore biological resources and offshore sand resources

Science.gov (United States)

Demopoulos, Amanda W.J.; Foster, Ann M.; Jones, Michal L.; Gualtieri, Daniel J.

2011-01-01

The Geospatial Characteristics GeoPDF of Florida's Coastal and Offshore Environments is a comprehensive collection of geospatial data describing the political boundaries and natural resources of Florida. This interactive map provides spatial information on bathymetry, sand resources, and locations of important habitats (for example, Essential Fish Habitats (EFH), nesting areas, strandings) for marine invertebrates, fish, reptiles, birds, and marine mammals. The map should be useful to coastal resource managers and others interested in marine habitats and submerged obstructions of Florida's coastal region. In particular, as oil and gas explorations continue to expand, the map can be used to explore information regarding sensitive areas and resources in the State of Florida. Users of this geospatial database will have access to synthesized information in a variety of scientific disciplines concerning Florida's coastal zone. This powerful tool provides a one-stop assembly of data that can be tailored to fit the needs of many natural resource managers. The map was originally developed to assist the Bureau of Ocean Energy Management, Regulation, and Enforcement (BOEMRE) and coastal resources managers with planning beach restoration projects. The BOEMRE uses a systematic approach in planning the development of submerged lands of the Continental Shelf seaward of Florida's territorial waters. Such development could affect the environment. BOEMRE is required to ascertain the existing physical, biological, and socioeconomic conditions of the submerged lands and estimate the impact of developing these lands. Data sources included the National Oceanic and Atmospheric Administration, BOEMRE, Florida Department of Environmental Protection, Florida Geographic Data Library, Florida Fish and Wildlife Conservation Commission, Florida Natural Areas Inventory, and the State of Florida, Bureau of Archeological Research. Federal Geographic Data Committee (FGDC) compliant metadata are

Polishing large NaCl windows on a continuous polisher

International Nuclear Information System (INIS)

Williamson, R.

1979-01-01

The Helios and Antares CO 2 fusion laser systems incorporate numerous large sodium chloride windows. These must be refinished periodically, making necessary a consistent and predictable polishing capability. A continuous polisher (or annular lap) which might at Kirtland's Developmental Optical Facility. Large NaCl windows had not been polished on this type of machine. The machine has proven itself capable of producing lambda/16 figures at 633 nm (HeNe) with extremely smooth surfaces on glass. Since then, we have been working exclusively on NaCl optics. Due to different polishing parameters between NaCl and glass, and the slight solubility of the pitch in the slurry, this phase presents new problems. The work on glass will be reviewed. Results on NaCl to date will be reported. The potential of this type of machine relative to prisms, thin and irregularly shaped optics will be discussed

Challenges in Projecting Sea Level Rise impacts on the Coastal Environment of South Florida (Invited)

Science.gov (United States)

Obeysekera, J.; Park, J.; Irizarry-Ortiz, M. M.; Barnes, J. A.; Trimble, P.; Said, W.

2010-12-01

Due to flat topography, a highly transmissive groundwater aquifer, and a growing population with the associated infrastructure, South Florida’s coastal environment is one of the most vulnerable areas to sea level rise. Current projections of sea level rise and the associated storm surges will have direct impacts on coastal beaches and infrastructure, flood protection, freshwater aquifers, and both the isolated and regional wetlands. Uncertainties in current projections have made it difficult for regional and local governments to develop adaptation strategies as such measures will depend heavily on the temporal and spatial patterns of sea level rise in the coming decades. We demonstrate the vulnerability of both the built and natural environments of the coastal region and present the current efforts to understand and predict the sea level rise estimate that management agencies could employ in planning of adaptation strategies. In particular, the potential vulnerabilities of the flood control system as well as the threat to the water supply wellfields in the coastal belt will be presented. In an effort to understand the historical variability of sea level rise, we present linkages to natural phenomena such as Atlantic Multi-Decadal Oscillation, and the analytical methods we have developed to provide probabilistic projections of both mean sea level rise and the extremes.

Time-dependent protection of ground and polished Cu using graphene film

International Nuclear Information System (INIS)

Dong, Yuhua; Liu, Qingqing; Zhou, Qiong

2015-01-01

Highlights: • Graphene was deposited on polished and ground Cu sheets by CVD. • Graphene films provide better protection to polished Cu for short time. • Multilayer graphene films provide better protection for short time. - Abstract: Graphene was deposited on Cu sheets with different morphologies by chemical vapor deposition. Scanning electron microscopy (SEM) analysis indicated that the morphology of the Cu sheet affected the graphene film properties. Electrochemical impedance spectroscopy measurements showed that the graphene film did not effectively protect Cu against corrosion because of prolonged exposure to ionic environments (3.5 wt.% NaCl solution). For short durations, graphene films provided better protection to polished Cu than ground Cu. Prolonged electrolyte immersion of graphene-coated Cu samples showed that the graphene film from the polished Cu surface was detached more easily than that from ground Cu

Diatom-based characterization of iberian coastal environments at different time scales

OpenAIRE

Ferreira, Tânia Maria de Azevedo, 1978-

2014-01-01

Tese de doutoramento, Geologia (Geologia Económica e do Ambiente), Universidade de Lisboa, Faculdade de Ciências, 2014 This thesis presents the mesoscale characterization of the evolution of two lagoon systems, Traba (550 years of sedimentary sequence) and Melides (1745 years of sedimentary sequence), using sedimentological, geochemical and biological, particularly diatoms, indicators. Also, a characterization of 18 present-day transitional environments (coastal lakes and ponds...

Convergent Polishing: A Simple, Rapid, Full Aperture Polishing Process of High Quality Optical Flats & Spheres

Science.gov (United States)

Suratwala, Tayyab; Steele, Rusty; Feit, Michael; Dylla-Spears, Rebecca; Desjardin, Richard; Mason, Dan; Wong, Lana; Geraghty, Paul; Miller, Phil; Shen, Nan

2014-01-01

Convergent Polishing is a novel polishing system and method for finishing flat and spherical glass optics in which a workpiece, independent of its initial shape (i.e., surface figure), will converge to final surface figure with excellent surface quality under a fixed, unchanging set of polishing parameters in a single polishing iteration. In contrast, conventional full aperture polishing methods require multiple, often long, iterative cycles involving polishing, metrology and process changes to achieve the desired surface figure. The Convergent Polishing process is based on the concept of workpiece-lap height mismatch resulting in pressure differential that decreases with removal and results in the workpiece converging to the shape of the lap. The successful implementation of the Convergent Polishing process is a result of the combination of a number of technologies to remove all sources of non-uniform spatial material removal (except for workpiece-lap mismatch) for surface figure convergence and to reduce the number of rogue particles in the system for low scratch densities and low roughness. The Convergent Polishing process has been demonstrated for the fabrication of both flats and spheres of various shapes, sizes, and aspect ratios on various glass materials. The practical impact is that high quality optical components can be fabricated more rapidly, more repeatedly, with less metrology, and with less labor, resulting in lower unit costs. In this study, the Convergent Polishing protocol is specifically described for fabricating 26.5 cm square fused silica flats from a fine ground surface to a polished ~λ/2 surface figure after polishing 4 hr per surface on a 81 cm diameter polisher. PMID:25489745

Coastal and Marine Environment Problems in East Kalimantan Province

OpenAIRE

Supriharyono

2000-01-01

Coastal and marine problems were collected from the coastal community in area of the Municipality of Balikpapan East Kalimantan Province, from fishermen, NGO's and government officials. The technique used was that of the Field Participatory Workshop's. the result of the study revealed some coastal community awarenees, coastal resources USAge, and governmental policy. The local government's failure to solve those problems was mainly due to lack of social awarenees for environmental coastal man...

Functional Median Polish

KAUST Repository

Sun, Ying

2012-08-03

This article proposes functional median polish, an extension of univariate median polish, for one-way and two-way functional analysis of variance (ANOVA). The functional median polish estimates the functional grand effect and functional main factor effects based on functional medians in an additive functional ANOVA model assuming no interaction among factors. A functional rank test is used to assess whether the functional main factor effects are significant. The robustness of the functional median polish is demonstrated by comparing its performance with the traditional functional ANOVA fitted by means under different outlier models in simulation studies. The functional median polish is illustrated on various applications in climate science, including one-way and two-way ANOVA when functional data are either curves or images. Specifically, Canadian temperature data, U. S. precipitation observations and outputs of global and regional climate models are considered, which can facilitate the research on the close link between local climate and the occurrence or severity of some diseases and other threats to human health. © 2012 International Biometric Society.

Light Detection and Ranging (LiDAR and Multispectral Scanner (MSS Studies Examine Coastal Environments Influenced by Mining

Directory of Open Access Journals (Sweden)

W. Charles Kerfoot

2014-01-01

Full Text Available There are numerous examples of past and present mine disposal into freshwater and marine coastal bays and riverine environments. Due to its high spatial resolution and extended water penetration, coastal light detection and ranging (LiDAR, coupled with multispectral scanning (MSS, has great promise for resolving disturbed shoreline features in low turbidity environments. Migrating mine tailings present serious issues for Lake Superior and coastal marine environments. Previous investigations in Lake Superior uncovered a metal-rich “halo” around the Keweenaw Peninsula, related to past copper mining practices. For over a century, waste rock migrating from shoreline tailing piles has moved along extensive stretches of coastline, compromising critical fish breeding grounds, damming stream outlets, transgressing into wetlands and along recreational beaches and suppressing benthic invertebrate communities. In Grand (Big Traverse Bay, Buffalo Reef is an important spawning area for lake trout and whitefish threatened by drifting tailings. The movement of tailings into Buffalo Reef cobble fields may interfere with the hatching of fish eggs and fry survival, either by filling in crevices where eggs are deposited or by toxic effects on eggs, newly hatched larvae or benthic communities. Here, we show that the coastal tailing migration is not “out of sight, out of mind”, but clearly revealed by using a combination of LiDAR and MSS techniques.

Functional Median Polish

KAUST Repository

Sun, Ying; Genton, Marc G.

2012-01-01

polish is demonstrated by comparing its performance with the traditional functional ANOVA fitted by means under different outlier models in simulation studies. The functional median polish is illustrated on various applications in climate science

Distribution and ecology of bees on the Polish Baltic coast (Hymenoptera, Apoidea, Apiformes

Directory of Open Access Journals (Sweden)

Banaszak Józef

2016-09-01

Full Text Available The present study provides data on the distribution of 128 bee species on the Polish Baltic coast. This brings the total number of species of Apiformes in this region to 164, including those that I reported earlier. The bee fauna of the Polish coast is characterized by a very high proportion of bumblebees and cuckoo bees (locally up to 70-80% of the total catch, and the dominant proportion of Megachilidae, especially Megachile species. The species diversity and dominance structure of the Apiformes differ between the western coast (a very high proportion of bumblebees and the eastern coast (a large number of dominant species. These results confirm my earlier hypothesis regarding the maritime-continental gradient of bumblebee abundance, indicating that the densities of these insects are higher in NW Poland. This study is the first to assess bee densities on coastal dunes in Poland.

Modeling global mangrove soil carbon stocks: filling the gaps in coastal environments

Science.gov (United States)

Rovai, A.; Twilley, R.

2017-12-01

We provide an overview of contemporaneous global mangrove soil organic carbon (SOC) estimates, focusing on a framework to explain disproportionate differences among observed data as a way to improve global estimates. This framework is based on a former conceptual model, the coastal environmental setting, in contrast to the more popular latitude-based hypotheses largely believed to explain hemispheric variation in mangrove ecosystem properties. To demonstrate how local and regional estimates of SOC linked to coastal environmental settings can render more realistic global mangrove SOC extrapolations we combined published and unpublished data, yielding a total of 106 studies, reporting on 552 sites from 43 countries. These sites were classified into distinct coastal environmental setting types according to two concurrent worldwide typology of nearshore coastal systems classifications. Mangrove SOC density varied substantially across coastal environmental settings, ranging from 14.9 ± 0.8 in river dominated (deltaic) soils to 53.9 ± 1.6 mg cm-3 (mean ± SE) in karstic coastlines. Our findings reveal striking differences between published values and contemporary global mangrove SOC extrapolation based on country-level mean reference values, particularly for karstic-dominated coastlines where mangrove SOC stocks have been underestimated by up to 50%. Correspondingly, climate-based global estimates predicted lower mangrove SOC density values (32-41 mg C cm-3) for mangroves in karstic environments, differing from published (21-126 mg C cm-3) and unpublished (47-58 mg C cm-3) values. Moreover, climate-based projections yielded higher SOC density values (27-70 mg C cm-3) for river-dominated mangroves compared to lower ranges reported in the literature (11-24 mg C cm-3). We argue that this inconsistent reporting of SOC stock estimates between river-dominated and karstic coastal environmental settings is likely due to the omission of geomorphological and geophysical

Climate Change Anticipation on Supporting Capacity of Fishing Environment in the Coastal Area of Tanjungmas Semarang City

Science.gov (United States)

Sari, Indah Kurniasih Wahyu; Hadi, Sudharto P.

2018-02-01

Climate change is no longer a debate about its existence but already a problem shared between communities, between agencies, between countries even global for handling serious because so many aspects of life and the environment is affected, especially for communities in coastal environments This climate change is a threat to the Earth, because it can affect all aspects of life and will damage the balance of life of Earth Climate change happens slowly in a fairly long period of time and it is a change that is hard to avoid. These Phenomena will give effect to the various facets of life. Semarang as areas located to Java and bordering the Java Sea are at high risk exposed to the impacts of climate change Also not a few residents of the city of Semarang who settled in the northern part of the city of Semarang and also have a livelihood as farmers/peasants and fishermen Many industrial centers or attractions that are prone to impacted by climate change. Thus, the anticipation of climate change on resources support neighborhood of fishermen in the coastal area of Tanjungmas Semarang interesting for further review. This study aims to find out more the influence of climate change on the environment of fishing identify potential danger due to the impacts of climate change on coastal areas of Tanjungmas Semarang The research was conducted through surveys, interviews and field observation without a list of questions to obtain primary and secondary data As for the analysis undertaken, namely the analysis of climate change on the coastal environment, the analysis of productivity of fishermen as well as the analysis of the likelihood of disaster risk at the coast due to climate change. From the results of the study the occurrence of sea rise as one of the indicators of climate change in the coastal City of Semarang to reach 0.8 mm/year and average soil degradation that ranged between 5 - 12 cm/year cause most coastal communities as well as the social life of the agricultural

Development of a fluorescent antibody method for the detection of Enterococcus faecium and its potential for coastal aquatic environment monitoring.

Science.gov (United States)

Caruso, Gabriella; Monticelli, L S; Caruso, R; Bergamasco, A

2008-02-01

A direct, microscopic fluorescent antibody method was developed to detect the occurrence of Enterococcus faecium in coastal aquatic environments and was compared with the conventional membrane filtering method. The "in situ" application of the antibody-based protocol in the analysis of water samples collected from coastal polyhaline habitats demonstrated good sensitivity and ease of implementation. Data obtained with the microscopic technique were in agreement with those obtained from culture counts. The fluorescent antibody method proved to be a rapid and reliable technique for the detection of E. faecium. The advantages and limitations intrinsic to the method are discussed, highlighting the potential of this new technique for monitoring coastal aquatic environments.

High frequency monitoring of the coastal marine environment using the MAREL buoy.

Science.gov (United States)

Blain, S; Guillou, J; Tréguer, P; Woerther, P; Delauney, L; Follenfant, E; Gontier, O; Hamon, M; Leilde, B; Masson, A; Tartu, C; Vuillemin, R

2004-06-01

The MAREL Iroise data buoy provides physico-chemical measurements acquired in surface marine water in continuous and autonomous mode. The water is pumped 1.5 m from below the surface through a sampling pipe and flows through the measuring cell located in the floating structure. Technological innovations implemented inside the measuring cell atop the buoy allow a continuous cleaning of the sensor, while injection of chloride ions into the circuit prevents biological fouling. Specific sensors for temperature, salinity, oxygen and fluorescence investigated in this paper have been evaluated to guarantee measurement precision over a 3 month period. A bi-directional link under Internet TCP-IP protocols is used for data, alarms and remote-control transmissions with the land-based data centre. Herein, we present a 29 month record for 4 parameters measured using a MAREL buoy moored in a coastal environment (Iroise Sea, Brest, France). The accuracy of the data provided by the buoy is assessed by comparison with measurements of sea water weekly sampled at the same site as part of SOMLIT (Service d'Observation du Milieu LIToral), the French network for monitoring of the coastal environment. Some particular events (impact of intensive fresh water discharges, dynamics of a fast phytoplankton bloom) are also presented, demonstrating the worth of monitoring a highly variable environment with a high frequency continuous reliable system.

Health Information in Polish (polski)

Science.gov (United States)

... Tools You Are Here: Home → Multiple Languages → Polish (polski) URL of this page: https://medlineplus.gov/languages/polish.html Health Information in Polish (polski) To use the sharing features on this page, ...

Environmental behavior of organotin compounds in the coastal environment of Xiamen, China

International Nuclear Information System (INIS)

Wang Xinhong; Hong Huasheng; Zhao Dongmei; Hong Liyu

2008-01-01

In 2006, organotins pollution were investigated in the coastal environment of Xiamen, China. Six species of organotin compounds including tributyltin, triphenyltin and their degradation compounds were quantified in the dissolved and particulate phases of the water, and in the sediment using GC-FPD. The concentrations of organotin compounds ranged from 2.2 to 160 ng (Sn) L -1 dissolved in the water, 0.14-6.7 ng (Sn) L -1 in suspended particulate matter and nd ∼ 26 ng (Sn) g -1 (dry weight) in the sediment. The highest concentration of total organotin or tributyltin in water was found in a shipyard and at a station near the inlet of the harbor, indicating fresh inputs of antifouling paints to Xiamen's coastal environment. Organotin speciation was performed on sediment cores to investigate contamination trends over the past ten years in the harbor. The results of 210 Pb dating indicated that Xiamen western harbor suffered contamination during 2000. The environmental behavior of organotins such as the enhancement of the microlayer, partitioning between water/suspended particulate matter and between water/sediment are also discussed in this paper

Environmental behavior of organotin compounds in the coastal environment of Xiamen, China

Energy Technology Data Exchange (ETDEWEB)

Wang Xinhong [State Key Laboratory of Marine Environmental Science, Environmental Science Research Center, Xiamen University, Xiamen 361005 (China)], E-mail: xhwang@xmu.edu.cn; Hong Huasheng; Zhao Dongmei; Hong Liyu [State Key Laboratory of Marine Environmental Science, Environmental Science Research Center, Xiamen University, Xiamen 361005 (China)

2008-07-01

In 2006, organotins pollution were investigated in the coastal environment of Xiamen, China. Six species of organotin compounds including tributyltin, triphenyltin and their degradation compounds were quantified in the dissolved and particulate phases of the water, and in the sediment using GC-FPD. The concentrations of organotin compounds ranged from 2.2 to 160 ng (Sn) L{sup -1} dissolved in the water, 0.14-6.7 ng (Sn) L{sup -1} in suspended particulate matter and nd {approx} 26 ng (Sn) g{sup -1} (dry weight) in the sediment. The highest concentration of total organotin or tributyltin in water was found in a shipyard and at a station near the inlet of the harbor, indicating fresh inputs of antifouling paints to Xiamen's coastal environment. Organotin speciation was performed on sediment cores to investigate contamination trends over the past ten years in the harbor. The results of {sup 210}Pb dating indicated that Xiamen western harbor suffered contamination during 2000. The environmental behavior of organotins such as the enhancement of the microlayer, partitioning between water/suspended particulate matter and between water/sediment are also discussed in this paper.

Preliminary investigation of a sensitive biomarker of organotin pollution in Chinese coastal aquatic environment and marine organisms

International Nuclear Information System (INIS)

Zhou Qunfang; Li Zhongyang; Jiang Guibin; Yang Ruiqiang

2003-01-01

A new sensitive biomarker can be potentially used to indicate the pollution status of organotin in oceanic environment. - In nine batches of sea bivalves collected from Chinese coastal cities during the year of 2000 to 2002, a special sample named Mya arenaria was found to have strong ability of butyltin accumulation compared with the other sampled bivalves in the corresponding batches. Tributyltin compound was the predominant pollutant with the detection rate high up to 100%. Special high levels of μg Sn/g were detected in some Mya arenaria samples. The results obtained showed that Mya arenaria was potentially a biomarker to indicate organotin pollution in coastal aquatic environment

Measurements of transmission in the visible and the IR in the Baltic coastal environment

NARCIS (Netherlands)

Dion, D.; Gardenal, L.; Jong, A.N. de; Forand, L.; Vogel, H.; Hurtaud, Y.; Stein, K.

2007-01-01

multinational campaign was organized by the NATO SET56 Group to assess transmission in coastal environments: the VAlidation Measurements of Propagation in IR and RAdar (VAMPIRA) experiment. VAMPIRA was conducted in the Baltic Sea, near Surendorf, Germany, from 27 March to 4 April 2004. During

Polish Cartographical Review

Directory of Open Access Journals (Sweden)

Nedjeljko Frančula

2017-07-01

Full Text Available The Polish Cartographical Review (PCR journal has been published in English four times a year since 2015. The journal is in open access and it is published by De Gruyter Open. It is edited by Polish scientists in collaboration with international experts.

Assessment of Urbanization on the Integrated Land-Ocean-Atmosphere Environment in Coastal Metropolis in Preparation for HyspIRI

Science.gov (United States)

Sequera, Pedro; McDonald, Kyle C.; Gonzalez, Jorge; Arend, Mark; Krakauer, Nir; Bornstein, Robert; Luvll, Jeffrey

2012-01-01

The need for comprehensive studies of the relationships between past and projected changes of regional climate and human activity in comple x urban environments has been well established. The HyspIRI preparato ry airborne activities in California, associated science and applicat ions research, and eventually HyspIRI itself provide an unprecedented opportunity for development and implementation of an integrated data and modeling analysis system focused on coastal urban environments. We will utilize HyspIRI preparatory data collections in developing ne w remote sensing-based tools for investigating the integrated urban e nvironment, emphasizing weather, climate, and energy demands in compl ex coastal cities.

Mussels as bioindicators of diclofenac contamination in coastal environments.

Science.gov (United States)

Cunha, S C; Pena, A; Fernandes, J O

2017-06-01

Diclofenac a nonsteroidal anti-inflammatory drug (NSAID) has been confirmed as an emerging contaminant in the aquatic environment. Toxicology studies have revealed that harmful effects may emerge from diclofenac presence not only for human health, but also for marine organisms, which implies its monitoring. To overcome the demanding challenges of diclofenac quantification in biotic aquatic species, a novel method for the determination of diclofenac in mussels (Mytilus galloprovincialis and Mytilus edulis) and macroalgae (Laminaria digitata) using high performance liquid chromatography coupled to tandem mass spectrometry was developed and validated according to the EC Decision 2002/657/EC. Additionally, a study was done about diclofenac contamination in mussels collected from 8 sites along the 1115 miles of coastline in Portugal in 2015. The results suggested that levels in mussels are closely related to the environmental contamination. Therefore, mussels can be a potential bioindicator of diclofenac contamination in the coastal environment. Copyright © 2017 Elsevier Ltd. All rights reserved.

Coastal zone environment measurements at Sakhalin Island using autonomous mobile robotic system

Science.gov (United States)

Tyugin, Dmitry; Kurkin, Andrey; Zaytsev, Andrey; Zeziulin, Denis; Makarov, Vladimir

2017-04-01

To perform continuous complex measurements of environment characteristics in coastal zones autonomous mobile robotic system was built. The main advantage of such system in comparison to manual measurements is an ability to quickly change location of the equipment and start measurements. AMRS allows to transport a set of sensors and appropriate power source for long distances. The equipment installed on the AMRS includes: a modern high-tech ship's radar «Micran» for sea waves measurements, multiparameter platform WXT 520 for weather monitoring, high precision GPS/GLONASS receiver OS-203 for georeferencing, laser scanner platform based on two Sick LMS-511 scanners which can provide 3D distance measurements in up to 80 meters on the AMRS route and rugged designed quad-core fanless computer Matrix MXE-5400 for data collecting and recording. The equipment is controlled by high performance modular software developed specially for the AMRS. During the summer 2016 the experiment was conducted. Measurements took place at the coastal zone of Sakhalin Island (Russia). The measuring system of AMRS was started in automatic mode controlled by the software. As result a lot of data was collected and processed to database. It consists of continuous measurements of the coastal zone including different weather conditions. The most interesting for investigation is a period of three-point storm detected on June, 2, 2016. Further work will relate to data processing of measured environment characteristics and numerical models verification based on the collected data. The presented results of research obtained by the support of the Russian president's scholarship for young scientists and graduate students №SP-193.2015.5

Polish-German bilingualism at school. A Polish perspective

Directory of Open Access Journals (Sweden)

Pulaczewska, Hanna

2014-03-01

Full Text Available This article presents the institutional frames for the acquisition of Polish literacy skills in Germany and the maintenance of Polish-German bilingualism after the repatriation of bilingual children to Poland. These processes are examined in the context of recent developments in the European domestic job market. While the European Union has placed proficiency in several languages among its educational objectives, and foreign languages have been made obligatory school subjects in all member countries, the potential advantages of internal European migrations for producing high-proficiency bilinguals are being ignored. Bilingualism resulting from migration and biculturalism enjoys little social prestige in the host countries. In Germany, there is significant regional variation in how school authorities react to challenges posed by the presence of minority languages. In many cases, the linguistic potential of many second-generation migrants and re-emigrants gets largely wasted because of lacking interest and incentives from German and Polish institutions alike.

Rare Pediastrum species (Chlorophyceae from Polish coastal lakes

Directory of Open Access Journals (Sweden)

Joanna Kowalska

2011-01-01

Full Text Available An account is given of the occurrence of Pediastrum (Chlorophyceae, Sphaeropleales in five eutrophic coastal lakes (Jamno, Bukowo, Gardno, Łebsko and Sarbsko in northern Poland, together with morphological data of the species and more detailed taxonomic and ecological information for three taxa which appear to be rare world wide. These are P. musterii, P. orientale and P. alternans; the first is recorded for the first time from central Europe. P. orientale and P. alternans show considerable morphological variability under different environmental conditions, indicating the need for further studies. The studied lakes seem to be especially favourable for Pediastrum, with a total of eight species (15 taxa in the phytoplankton noted during the summer. However, the relative frequency of the genus in the overall algal communities was low. The most frequent species were P. boryanum, P. kawraiskyi and P. duplex and these were accompanied by cyanobacteria, coccal green algae (Chlorophyceae, Chlorococcales and diatoms (Bacillariophyceae. All the Pediastrum taxa were documented using LM and SEM.

Polish Academy of Sciences Great Dictionary of Polish [Wielki słownik języka polskiego PAN

Directory of Open Access Journals (Sweden)

Piotr Žmigrodzki

2014-12-01

Full Text Available The paper describes a lexicographical project involving the development of the newest general dictionary of the Polish language: the Polish Academy of Sciences Great Dictionary of Polish [Wielki słownik języka polskiego PAN]. The project is coordinated by the Institute of Polish Language at the Polish Academy of Sciences and carried out in collaboration with linguists and lexicographers from several other Polish academic centres. The paper offers a brief description of the genesis of the project and the scope of information included in the dictionary, the organisation of work, the life of the dictionary on the Web as well as the plans for the future.

Polish Higher Education: Intersectoral Distinctiveness

Science.gov (United States)

Musial, Joanna

2014-01-01

This study analyzes degrees of differences between the private and public sectors of Polish higher education. It finds them to be strong: Polish private institutions function very differently from Polish public institutions and these differences correspond with those found in the literature on higher education elsewhere in the world. Polish…

Monitoring the drastic growth of ship breaking yards in Sitakunda: a threat to the coastal environment of Bangladesh.

Science.gov (United States)

Abdullah, Hasan Muhammad; Mahboob, M Golam; Banu, Mehmuna R; Seker, Dursun Zafer

2013-05-01

The vast coastal and marine resources that occur along the southern edge of Bangladesh make it one of the most productive areas of the world. However, due to growing anthropogenic impacts, this area is under considerable environmental pressure from both physical and chemical stress factors. Ship breaking, or the dismantling and demolition of out-of-service ocean-going vessels, has become increasingly common in many coastal areas. To investigate the extent of ship breaking activities in Bangladesh along the Sitakunda coast, various spatial and non-spatial data were obtained, including remote sensing imagery, statistical records and published reports. Impacts to coastal and marine life were documented. Available data show that ship breaking activities cause significant physical disturbance and release toxic materials into the environment, resulting in adverse effects to numerous marine taxonomic groups such as fish, mammals, birds, reptiles, plants, phytoplankton, zooplankton and benthic invertebrates. Landsat imagery illustrates that the negatively impacted coastal area has grown 308.7 % from 367 ha in 1989 to 1,133 ha in 2010. Physicochemical and biological properties of coastal soil and water indicate substantially elevated pollution that poses a risk of local, regional and even global contamination through sea water and atmospheric transport. While damage to the coastal environment of Bangladesh is a recognized hazard that must be addressed, the economic benefits of ship breaking through job creation and fulfilling the domestic demand for recycled steel must be considered. Rather than an outright ban on beach breaking of ships, the enterprise must be recognized as a true and influential industry that should be held responsible for developing an economically viable and environmentally proactive growth strategy. Evolution of the industry toward a sustainable system can be aided through reasonable and enforceable legislative and judicial action that takes a balanced

Surface Roughness and Gloss of Actual Composites as Polished With Different Polishing Systems.

Science.gov (United States)

Rodrigues-Junior, S A; Chemin, P; Piaia, P P; Ferracane, J L

2015-01-01

This in vitro study evaluated the effect of polishing with different polishing systems on the surface roughness and gloss of commercial composites. One hundred disk-shaped specimens (10 mm in diameter × 2 mm thick) were made with Filtek P-90, Filtek Z350 XT, Opallis, and Grandio. The specimens were manually finished with #400 sandpaper and polished by a single operator using three multistep systems (Superfix, Diamond Pro, and Sof-lex), one two-step system (Polidores DFL), and one one-step system (Enhance), following the manufacturer's instructions. The average surface roughness (μm) was measured with a surface profilometer (TR 200 Surface Roughness Tester), and gloss was measured using a small-area glossmeter (Novo-Curve, Rhopoint Instrumentation, East Sussex, UK). Data were analyzed by two-way analysis of variance and Tukey's test (α=0.05). Statistically significant differences in surface roughness were identified by varying the polishing systems (pGloss was influenced by the composites (pone-step system, Enhance, produced the lowest gloss for all composites. Surface roughness and gloss were affected by composites and polishing systems. The interaction between both also influenced these surface characteristics, meaning that a single polishing system will not behave similarly for all composites. The multistep systems produced higher gloss, while the one-step system produced the highest surface roughness and the lowest gloss of all.

Environmental perverse incentives in coastal monitoring.

Science.gov (United States)

Gibbs, Mark T

2013-08-15

It can be argued that the intensity of monitoring of coastal marine environments lags behind the equivalent terrestrial environments. This results in a paucity of long-term time series of key environmental parameters such as turbidity. This lack of management information of the sources and sinks, and causes and impacts of stressors to the coastal marine environment, along with a lack of co-ordination of information collection is compromising the ability of environmental impact assessments of major coastal developments to discriminate between local and remote anthropogenic impacts, and natural or background processes. In particular, the quasi outsourcing of the collection of coastal information can lead to a perverse incentive whereby in many cases nobody is actively or consistently monitoring the coastal marine environment effectively. This is particularly the case with regards to the collection of long-term and whole-of-system scale data. This lack of effective monitoring can act to incentivise poor environmental performance. Copyright © 2013 Elsevier Ltd. All rights reserved.

Polish visit

CERN Document Server

2003-01-01

On 6 October, Professor Michal Kleiber, Polish Minister of Science and Chairman of the State Committee for Scientific Research, visited CERN and met both the current and designated Director General, Luciano Maiani and Robert Aymar. Professor Kleiber visited the CMS and ATLAS detector assembly halls, the underground cavern for ATLAS, and the LHC superconducting magnet string test hall. Michal Kleiber (left), Polish minister of science and Jan Krolikowski, scientist at Warsaw University and working for CMS, who shows the prototypes of the Muon Trigger board of CMS.

Structural strength deterioration of coastal bridge piers considering non-uniform corrosion in marine environments

Science.gov (United States)

Guo, Anxin; Yuan, Wenting; Li, Haitao; Li, Hui

2018-04-01

In the aggressive marine environment over a long-term service period, coastal bridges inevitably sustain corrosion-induced damage due to high sea salt and humidity. This paper investigates the strength reduction of coastal bridges, especially focusing on the effects of non-uniform corrosion along the height of bridge piers. First, the corrosion initiation time and the degradation of reinforcement and concrete are analyzed for bridge piers in marine environments. To investigate the various damage modes of the concrete cover, a discretization method with fiber cells is used for calculating time-dependent interaction diagrams of cross-sections of the bridge piers at the atmospheric zone and the splash and tidal zone under a combination of axial force and bending moment. Second, the shear strength of these aging structures is analyzed. Numerical simulation indicates that the strength of a concrete pier experiences dramatic reduction from corrosion initiation to the spalling of the concrete cover. Strength loss in the splash and tidal zone is more significant than in the atmospheric zone when structures' service time is assumed to be the same.

Chemical mechanical glass polishing with cerium oxide: Effect of selected physico-chemical characteristics on polishing efficiency

Czech Academy of Sciences Publication Activity Database

Janoš, P.; Ederer, J.; Pilařová, V.; Henych, Jiří; Tolasz, Jakub; Milde, D.; Opletal, T.

2016-01-01

Roč. 362, SEP (2016), s. 114-120 ISSN 0043-1648 R&D Projects: GA MŠk(CZ) LM2015073 Institutional support: RVO:61388980 Keywords : Chemical mechanical polishing * Ceria-based polishing powders * Polishing efficienc Subject RIV: CA - Inorganic Chemistry Impact factor: 2.531, year: 2016

Local Authority Empowerment towards Quality Living Environment for Coastal Reclamation Area

Directory of Open Access Journals (Sweden)

Yusup Mohammad

2016-01-01

Full Text Available Good urban governance administration system is the key to a successful physical planning development. A local authority of a local government concentrates on planning administration and executes the policies and strategies either the federal or state, or even the local’s policies and strategies. Based on its characteristic as the lowest level of government, it becomes the best authority to regulate and monitor the development process within their territory. The significance of a local authority in providing quality living environment invites various academia and professionals to ponder the best urban governance system at a local level. However, there are issues with regards to financial and technical capacity of a local authority, its legal limitation and development instrument adopted in providing urban services for coastal reclamation area in Malaysia. The aim of this paper is to investigate the capability of local authorities in Malaysia in implementing their function as drawn by the legislation. Hence, this paper examines the roles and functions of a local authority as the lowest level of government administration agency in providing urban services; collecting revenue; safeguarding the physical environment in Malaysia, particularly when dealing with development in a coastal reclamation area. Primary data collection was gathered through face-to-face interview sessions involving government agencies and stakeholders. Legal documents, policies and development plans were then analysed to support the primary data for further understanding of the issues concerning the capacity of a local authority especially when providing urban services within its area. The study is expected to provide a new approach to local authorities in Malaysia in providing quality living environment in terms of development procedure, the role and function, legal empowerment, and decentralisation of function particularly in enhancing the current practices at local level.

Development of multi-year land cover data to assess wildfire impacts to coastal watersheds and the nearshore environment

Science.gov (United States)

Morrison, Katherine D.

In the Mediterranean ecosystems of coastal California, wildfire is a common disturbance that can significantly alter vegetation in watersheds that transport sediment and nutrients to the adjacent nearshore oceanic environment. We assess the impact of two wildfires that burned in 2008 on land cover and to the nearshore environment along the Big Sur coast in central California. We created a multi-year land cover dataset to assess changes to coastal watersheds as a result of fire. This land cover dataset was then used to model changes in nonpoint source pollutants transported to the nearshore environment. Results indicate post-fire increases in percent export compared to pre-fire years and also link wildfire severity to the specific land cover changes that subsequently increase exports of pollutants and sediment to the nearshore environment. This approach is a replicable across watersheds and also provides a framework for including the nearshore environment as a value at risk terrestrial land management revolving around wildfire, including suppression, thinning, and other activities that change land cover at a landscape scale.

The formation of the polish opposite movement in Western Ukraine at the beginning of the Second world war

Directory of Open Access Journals (Sweden)

Viktoriya V. Dashko

2016-02-01

Full Text Available The article highlights the nature of the Soviet totalitarian ethnic policy and its influence on the origin of the Polish opposite movement in Western Ukraine at the beginning of the Second World War. It also clarifies the main factors of the formation of active opposite movements among the Polish part of population in the Western Ukraine territory, which withdrew to the Soviet Union due to the distribution of Poland as a result of the Molotov-Ribbentrop Pact. The author defined category of Polish nationality persons, who were dissatisfied with Stalin’s repressive policies in 1939-1941 and become that social environment, in which finally formed opposite movement to totalitarianism and, in particular, antinational regime against the Polish ethnos, and the environment from which later appeared activists of this movement. By the author was analyzed the activity of Soviet authorities in the occupied territories of the former «Wshodnih kresuv» of the Second Rich Pospolyta and determined main factors that led to dissatisfaction with the rigid Soviet policy against the former government officials, military precipitators and servants of the Roman Catholic Church. Investigated and determined features of the Polish opposite movement formation in the former eastern Polish territories occupied in 1939 by the Soviet Union and seized in 1941 by Nazi Germany. The article also describes the origin and activity of the first underground Polish armed forces on Ukrainian territory.

GIS and Remote Sensing Applications in the Assessment of Change within a Coastal Environment in the Niger Delta Region of Nigeria

Directory of Open Access Journals (Sweden)

Edmund C. Merem

2006-03-01

Full Text Available In the last decades, the Niger Delta region has experienced rapid growth in population and economicv activity with enormous benefits to the adjacent states and the entire Nigerian society. As the region embarks upon an unprecedented phase of economic expansion in the 21st century, it faces several environmental challenges fuelled partly by the pressures caused by human activities such as oil and gas exploration, housing development, and road construction for transportation, economic development and demographic changes. This continued growth has resulted in environmental problems such as coastal wetland loss, habitat degradation, and water pollution, gas flaring, destruction of forest vegetation as well as a host of other issues. This underscores the urgent need to design new approaches for managing remote costal resources in sensitive tropical environments effectively in order to maintain a balance between coastal resource conservation and rapid economic development in developing countries for sustainability. Notwithstanding previous initiatives, there have not been any major efforts in the literature to undertake a remote sensing and GIS based assessment of the growing incidence of environmental change within coastal zone environments of the study area. This project is an attempt to fill that void in the literature by exploring the applications of GIS and remote sensing in a tropical coastal zone environment with emphasis on the environmental impacts of development in the Niger Delta region of Southern Nigeria. To deal with some of the aforementioned issues, several research questions that are of great relevance to the paper have been posed. The questions include, Have there been any changes in the coastal environment of the study area? What are the impacts of the changes? What forces are responsible for the changes? Has there been any major framework in place to deal with the changes? The prime objective of the paper is to provide a novel

A Generational Divide in the Academic Profession: A Mixed Quantitative and Qualitative Approach to the Polish Case

Science.gov (United States)

Kwiek, Marek

2017-01-01

In a recently changing Polish academic environment--following the large-scale higher education reforms of 2009-2012--different academic generations have to cope with different challenges. Polish academics have been strongly divided generationally, not only in terms of what they think and how they work but also in terms of what is academically…

Aquaculture and mangrove ecosys of temproductivity in arid and semi-arid Balochistan coastal environments

International Nuclear Information System (INIS)

Khattak, M.I.

2005-01-01

A survey of coastal shrimp-pond operations, and the structure and functioning of coastal mangrove forest ecosystems with particular reference to Ecuador, indicates that certain physical parameters may be good predictors of key biological processes. The most important factors are those associated with the regional water balance, tidal and surface water circulation patterns, and the physicochemical properties of the underlying soils. One important conclusion to emerge from the analyses is that at both regional and local levels, well-developed and productive mangrove forest areas often represent the least desirable sites for the construction and operation of commercial shrimp ponds. In certain regards semi-arid and arid coastal environments where mangroves are poorly developed, shrimp ponds that are constructed on barren mud flats and inland salt pans appear to have the potential to produce higher yields of shrimp with fewer management problems and at a relatively lower production cost. The data and research results from coast of Baluchistan and elsewhere are briefly summarized to suggest why productive mangrove ecosystems to not make the best areas in which to obtain maximum shrimp-pond yields. (author)

Basis for a valuation of the Polish Exclusive Economic Zone of the Baltic Sea: Rationale and quest for tools

Directory of Open Access Journals (Sweden)

Jan Marcin Węsławski

2006-03-01

Full Text Available This paper summarises current knowledge of goods and servicesin the Polish Exclusive Economic Zone of the Baltic Sea ecosystem.It reviews specific properties of the Baltic that could be usedfor economic valuation. Goods and services range from the familiarresources of fish and minerals, which were valued with the ProductivityMethod, to less obvious services provided by the ecosystem suchas biofiltration in coastal sands, valued with either the ReplacementCost or Damage Cost Avoided methods. Disservices to the marineecosystem are also considered, e.g. erosion and coastal flooding,including the costs of planned mitigating measures. This paperemphasises the importance of using valuation methods to helpmake better-educated decisions for the sustainability of theBaltic Sea.

Features of the Institutional Structure of the Polish Stock Market under Conditions of Transformational Changes in the Global Financial Environment

Directory of Open Access Journals (Sweden)

Goncharenko Nataliia I.

2017-03-01

Full Text Available Under modern conditions of transformational changes in the global financial environment, the international stock market acquires stable features of activization of investment activity, formation of a large network of professional participants in the stock market and its multi-level institutional structure, expansion of the range of trade in securities, access of economic entities of different countries to financial resources and diversification of mechanisms of concentration, etc. There conducted a study of peculiarities of the institutional structure of the Polish stock market in the context of transformational changes in the global economic system. The factors influencing the volume of capitalization of the Warsaw Stock Exchange are analyzed; the dependence of the capitalization of the Exchange on foreign portfolio investments in shares of Polish issuers is revealed. Based on the results of own calculations of multiple correlation coefficients, the level of dependence between capital stock market indicators and assets of such financial institutions in Poland as investment and open pension funds, insurance companies is determined, and a significant interconnection of assets of investment and open pension funds and insurance companies is revealed. The obtained results can become a basis for institutional investors in the process of making effective decisions on expanding the range of trading in securities.

Multi-Temporal Analysis of Forestry and Coastal Environments Using UASs

Directory of Open Access Journals (Sweden)

Luís Pádua

2017-12-01

Full Text Available Due to strong improvements and developments achieved in the last decade, it is clear that applied research using remote sensing technology such as unmanned aerial vehicles (UAVs can provide a flexible, efficient, non-destructive, and non-invasive means of acquiring geoscientific data, especially aerial imagery. Simultaneously, there has been an exponential increase in the development of sensors and instruments that can be installed in UAV platforms. By combining the aforementioned factors, unmanned aerial system (UAS setups composed of UAVs, sensors, and ground control stations, have been increasingly used for remote sensing applications, with growing potential and abilities. This paper’s overall goal is to identify advantages and challenges related to the use of UAVs for aerial imagery acquisition in forestry and coastal environments for preservation/prevention contexts. Moreover, the importance of monitoring these environments over time will be demonstrated. To achieve these goals, two case studies using UASs were conducted. The first focuses on phytosanitary problem detection and monitoring of chestnut tree health (Padrela region, Valpaços, Portugal. The acquired high-resolution imagery allowed for the identification of tree canopy cover decline by means of multi-temporal analysis. The second case study enabled the rigorous and non-evasive registry process of topographic changes that occurred in the sandspit of Cabedelo (Douro estuary, Porto, Portugal in different time periods. The obtained results allow us to conclude that the UAS constitutes a low-cost, rigorous, and fairly autonomous form of remote sensing technology, capable of covering large geographical areas and acquiring high precision data to aid decision support systems in forestry preservation and coastal monitoring applications. Its swift evolution makes it a potential big player in remote sensing technologies today and in the near future.

Polish country study to address climate change: Strategies of the GHG`s emission reduction and adaptation of the Polish economy to the changed climate. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-01-01

The Polish Country Study Project was initiated in 1992 as a result of the US Country Study Initiative whose objective was to grant the countries -- signatories of the United Nations` Framework Convention on Climate Change -- assistance that will allow them to fulfill their obligations in terms of greenhouse gases (GHG`s) inventory, preparation of strategies for the reduction of their emission, and adapting their economies to the changed climatic conditions. In February 1993, in reply to the offer from the United States Government, the Polish Government expressed interest in participation in this program. The Study proposal, prepared by the Ministry of Environmental Protection, Natural Resources and Forestry was presented to the US partner. The program proposal assumed implementation of sixteen elements of the study, encompassing elaboration of scenarios for the strategy of mission reduction in energy sector, industry, municipal management, road transport, forestry, and agriculture, as well as adaptations to be introduced in agriculture, forestry, water management, and coastal management. The entire concept was incorporated in macroeconomic strategy scenarios. A complementary element was the elaboration of a proposal for economic and legal instruments to implement the proposed strategies. An additional element was proposed, namely the preparation of a scenario of adapting the society to the expected climate changes.

Environmental literacy in agriculture and coastal areas

Science.gov (United States)

Pujianti, N.; Munandar, A.; Surakusumah, W.

2018-05-01

This research aim to investigate the environmental literacy of junior high school students in agricultural and coastal areas in Subang based on knowledge, cognitive skill and attitudes toward to environment. This research used descriptive method. The subjects of the research were 7 grade students of junior high school and involved 62 participants in agriculture area and 64 participants in coastal area. The instrument of environment literacy adapted from Middle School Environment Literacy Survey (MSELS) and adapted to the context of agricultural and coastal area. The results showed that: environmental literacy in agricultural areas is 169.30 with moderate category and environmental literacy in the coastal area is 152.61 in the moderate category.

The socio-economic significance of the Turkish coastal environment for sustainable development.

Science.gov (United States)

Kuleli, Tuncay

2015-05-01

The objective of this study was to estimate the contribution from the coastal resources in the coastal region to the national economy for sustainable development. There was no separate data base for the coastal zone so that the contribution from the coastal resources in the coastal region to the national economy was not evaluated. In estimating the significance of Turkish coastal cities, indirect methods and the geographical information system were used. In conclusion, it was found that 61.09% of the total national gross domestic product and 50.75% of the national agricultural, 90.98% of the national fisheries, 68.19% of the national tourism and 71.82% of the national industrial gross domestic product came from the coastal zone. It was determined that while coastal cities of Turkey had 28.23% of the national surface area, the coastal district had 12.96%; in other words, 21.5 million (28.04%) of the national population lived in 101.5 thousand km(2) (12.96%) of the national surface area. Approximately 44% of the national gross domestic product comes from the top ten coastal cities. According to the contribution ratio to the national economy of each coastal city, these low-lying coastal cities have about $16 billion risk value. An analysis showed that the coastal zone is very important for the national economy of Turkey and also the pressure on the coastal zone is very high. At a time of increasing pressures on coastal resources of Turkey, the decision-makers need the most up-to-date information on the full range of values these resources provide in order to make decisions that best reflect the public interest.

Natural resource damage assessment models for Great Lakes, coastal, and marine environments

International Nuclear Information System (INIS)

French, D.P.; Reed, M.

1993-01-01

A computer model of the physical fates, biological effects, and economic damages resulting from releases of oil and other hazardous materials has been developed by Applied Science Associates to be used in Type A natural resource damage assessments under the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). Natural resource damage assessment models for great lakes environments and for coastal and marine environments will become available. A coupled geographical information system allows gridded representation of complex coastal boundaries, variable bathymetry, shoreline types, and multiple biological habitats. The physical and biological models are three dimensional. Direct mortality from toxic concentrations and oiling, impacts of habitat loss, and food web losses are included in the model. Estimation of natural resource damages is based both on the lost value of injured resources and on the costs of restoring or replacing those resources. The models are implemented on a personal computer, with a VGA graphical user interface. Following public review, the models will become a formal part of the US regulatory framework. The models are programmed in a modular and generic fashion, to facilitate transportability and application to new areas. The model has several major components. Physical fates and biological effects submodels estimate impacts or injury resulting from a spill. The hydrodynamic submodel calculates currents that transport contaminant(s) or organisms. The compensable value submodel values injuries to help assess damages. The restoration submodel determines what restoration actions will most cost-effectively reduce injuries as measured by compensable values. Injury and restoration costs are assessed for each of a series of habitats (environments) affected by the spill. Environmental, chemical, and biological databases supply required information to the model for computing fates and effects (injury)

Advisory Functions of Selected Polish Business Institutions in the Innovation Process in Enterprises – Research Conclusions

Directory of Open Access Journals (Sweden)

Joanna KUROWSKA-PYSZ

2014-03-01

Full Text Available This paper contains an analysis of innovation processes in enterprises, from the perspective of demand for knowledge, which companies increasingly obtain from business environment. This requires a discernment of valuable partners in the environment, who will provide professional transfer of knowledge to the company. Therefore, knowledge has become a product, and Polish universities and specialized, commercial knowledge providers are competing for the customer on the knowledge market. While knowledge transfer to companies is a secondary activity for Polish universities, specialized, commercial knowledge suppliers are making an effort of acquiring as much orders as possible. Therefore a natural competition between these two types of entities arises. In this paper the Author examines possibilities of supporting innovation-oriented enterprises by Polish universities and commercial providers of knowledge and formulates terms and conditions which will make cooperation between these two groups of entities possible, so as to transform the competition into cooperation, beneficial for both sides, and support innovative processes in enterprises.

A new perspective of particle adsorption: Dispersed oil and granular materials interactions in simulated coastal environment.

Science.gov (United States)

Meng, Long; Bao, Mutai; Sun, Peiyan

2017-09-15

This study, adsorption behaviors of dispersed oil in seawaters by granular materials were explored in simulation environment. We quantitatively demonstrated the dispersed oil adsorbed by granular materials were both dissolved petroleum hydrocarbons (DPHs) and oil droplets. Furthermore, DPHs were accounted for 42.5%, 63.4%, and 85.2% (35.5% was emulsion adsorption) in the adsorption of dispersed oil by coastal rocks, sediments, and bacterial strain particles respectively. Effects of controlling parameters, such as temperature, particle size and concentration on adsorption of petroleum hydrocarbons were described in detail. Most strikingly, adsorption concentration was followed a decreasing order of bacterial strain (0.5-2μm)>sediments (0.005-0.625mm)>coastal rocks (0.2-1cm). With particle concentration or temperature increased, adsorption concentration increased for coastal rocks particle but decreased for sediments particle. Besides, particle adsorption rate of petroleum hydrocarbons (n-alkanes and PAHs) was different among granular materials during 60 days. Copyright © 2017 Elsevier Ltd. All rights reserved.

Mercury in the atmospheric and coastal environments of Mexico.

Science.gov (United States)

Ruelas-Inzunza, Jorge; Delgado-Alvarez, Carolina; Frías-Espericueta, Martín; Páez-Osuna, Federico

2013-01-01

In Mexico, published studies relating to the occurrence of Hg in the environment are limited. Among the main sources of Hg in Mexico are mining and refining of Auand Hg, chloralkali plants, Cu smelting, residential combustion of wood, carbo electric plants, and oil refineries. Hg levels are highly variable in the atmospheric compartment because of the atmospheric dynamics and ongoing metal exchange with the terrestrial surface. In atmospheric studies, Hg levels are usually reported as total gaseous Hg (TGM). In Mexico, TGM values ranged from 1.32 ng m-3 in Hidalgo state (a rural agricultural area) to 71.82 ng m-3 in Zacatecas state (an area where brick manufacturers use mining wastes as a raw material).Published information on mercury levels in the coastal environment comprise 21 studies, representing 21 areas, in which sediments constituted the substrate that was analyzed for Hg. In addition, water samples were analyzed for Hg in nine studies.Few studies exist on Hg levels in the Caribbean and in the southwest of the country where tourism is rapidly increasing. Hence, there is a need for establishing baseline levels of mercury in these increasingly visited areas. In regions where studies have been undertaken, Hg levels in sediments were highly variable. Variations in Hg sediment levels mainly result from geological factors and the varying degree of anthropogenic impacts in the studied areas. In areas that still have pristine or nearly pristine environments (e.g., coast, Baja California, Todos Santos Bay, and La Paz lagoon), sediment Hg levels ranged from Mexico, it is clear that Hg fluxes to sediments have increased from2- to 15-fold in recent years. Since the 1940s, historical increases of Hg fluxes have resulted from higher agricultural waste releases and exhaust from the thermo electric plants. The levels of Hg in water reveal a moderate to elevated contamination of some Mexican coastal sites. In Urias lagoon (NW Mexico), moderate to high levels were found in

The tourism attractiveness of Polish libraries

OpenAIRE

Miedzińska, Magdalena; Tanaś, Sławoj

2009-01-01

The aim of the article is to draw the reader's attention to the tourism attractiveness of renowned Polish libraries. These have attained a tourism function due to tourism exploration and penetration, but remain in the shadow of other Polish cultural assets. The article outlines the historical geography of Polish libraries, an analysis of tourism assets and an attempt to classify and catalogue libraries in Poland.

Discrimination of coastal wetland environments in the Amazon region based on multi-polarized L-band airborne Synthetic Aperture Radar imagery

Science.gov (United States)

Souza-Filho, Pedro Walfir M.; Paradella, Waldir R.; Rodrigues, Suzan W. P.; Costa, Francisco R.; Mura, José C.; Gonçalves, Fabrício D.

2011-11-01

This study assessed the use of multi-polarized L-band images for the identification of coastal wetland environments in the Amazon coast region of northern Brazil. Data were acquired with a SAR R99B sensor from the Amazon Surveillance System (SIVAM) on board a Brazilian Air Force jet. Flights took place in the framework of the 2005 MAPSAR simulation campaign, a German-Brazilian feasibility study focusing on a L-band SAR satellite. Information retrieval was based on the recognition of the interaction between a radar signal and shallow-water morphology in intertidal areas, coastal dunes, mangroves, marshes and the coastal plateau. Regarding the performance of polarizations, VV was superior for recognizing intertidal area morphology under low spring tide conditions; HH for mapping coastal environments covered with forest and scrub vegetation such as mangrove and vegetated dunes, and HV was suitable for distinguishing transition zones between mangroves and coastal plateau. The statistical results for the classification maps expressed by kappa index and general accuracy were 83.3% and 0.734 for the multi-polarized color composition (R-HH, G-HV, B-VV), 80.7% and 0.694% for HH, 79.7% and 0.673% for VV, and 77.9% and 0.645% for HV amplitude image. The results indicate that use of multi-polarized L-band SAR is a valuable source of information aiming at the identification and discrimination of distinct geomorphic targets in tropical wetlands.

Detection of paint polishing defects

Science.gov (United States)

Rebeggiani, S.; Wagner, M.; Mazal, J.; Rosén, B.-G.; Dahlén, M.

2018-06-01

Surface finish plays a major role on perceived product quality, and is the first thing a potential buyer sees. Today end-of-line repairs of the body of cars and trucks are inevitably to secure required surface quality. Defects that occur in the paint shop, like dust particles, are eliminated by manual sanding/polishing which lead to other types of defects when the last polishing step is not performed correctly or not fully completed. One of those defects is known as ‘polishing roses’ or holograms, which are incredibly hard to detect in artificial light but are clearly visible in sunlight. This paper will present the first tests with a measurement set-up newly developed to measure and analyse polishing roses. The results showed good correlations to human visual evaluations where repaired panels were estimated based on the defects’ intensity, severity and viewing angle.

Tooth polishing: The current status

Directory of Open Access Journals (Sweden)

Madhuri Alankar Sawai

2015-01-01

Full Text Available Healthy teeth and gums make a person feel confident and fit. As people go about their daily routines and with different eating and drinking habits, the tooth enamel turns yellowish or gets stained. Polishing traditionally has been associated with the prophylaxis procedure in most dental practices, which patients know and expect. However, with overzealous use of polishing procedure, there is wearing of the superficial tooth structure. This would lead to more accumulation of local deposits. Also, it takes a long time for the formation of the fluoride-rich layer of the tooth again. Hence, now-a-days, polishing is not advised as a part of routine oral prophylaxis procedure but is done selectively based on the patients′ need. The article here, gives an insight on the different aspects of the polishing process along with the different methods and agents used for the same.

Polish Industry and Art at CERN

CERN Multimedia

2000-01-01

On 17 October 2000 the second Polish industrial and technological exhibition opened at CERN. The first one was held five years ago and nine of the companies that were present then have come back again this year. Six of those companies were awarded contracts with CERN in 1995. Three Polish officials were present at the Opening Ceremony today: Mrs Malgorzata Kozlowska, Under-secretary of State in the State Committee for Scientific Research, Mr Henryk Ogryczak, Under-secretary of State in Ministry of Economy and Prof. Jerzy Niewodniczanski, President of National Atomic Energy Agency. Professor Luciano Maiani welcomed the Polish delegation to CERN and stressed the important contribution of Polish scientists and industrialists to the work of the laboratory. Director General Luciano Maiani (back left) and head of SPL division Karl-Heinz Kissler (back right) visit the Poland at CERN exhibition… The exhibition offers Polish companies the opportunity to establish professional contacts with CERN. Nineteen companies...

Polish Code of Ethics of a Medical Laboratory Specialist.

Science.gov (United States)

Elżbieta, Puacz; Waldemar, Glusiec; Barbara, Madej-Czerwonka

2014-09-01

Along with the development of medicine, increasingly significant role has been played by the laboratory diagnostics. For over ten years the profession of the medical laboratory specialist has been regarded in Poland as the autonomous medical profession and has enjoyed a status of one of public trust. The process of education of medical laboratory specialists consists of a five-year degree in laboratory medicine, offered at Medical Universities, and of a five-year Vocational Specialization in one of the fields of laboratory medicine such as clinical biochemistry, medical microbiology, medical laboratory toxicology, medical laboratory cytomorphology and medical laboratory transfusiology. An important component of medical laboratory specialists' identity is awareness of inherited ethos obtained from bygone generations of workers in this particular profession and the need to continue its further development. An expression of this awareness is among others Polish Code of Ethics of a Medical Laboratory Specialist (CEMLS) containing a set of values and a moral standpoint characteristic of this type of professional environment. Presenting the ethos of the medical laboratory specialist is a purpose of this article. Authors focus on the role CEMLS plays in areas of professional ethics and law. Next, they reconstruct the Polish model of ethos of medical diagnostic laboratory personnel. An overall picture consists of a presentation of the general moral principles concerning execution of this profession and rules of conduct in relations with the patient, own professional environment and the rest of the society. Polish model of ethical conduct, which is rooted in Hippocratic medical tradition, harmonizes with the ethos of medical laboratory specialists of other European countries and the world.

Polish polar research (outline

Directory of Open Access Journals (Sweden)

Krzysztof Ludwik Birkenmajer

2017-12-01

Full Text Available The article describes Polish research and discoveries in the Arctic and the Antarctic since the 19th century. The author is a geologist and since 1956 has been engaged in scientific field research on Spitsbergen, Greenland and Antarctica (23 expeditions. For many years chairman of the Committee on Polar Research of the Polish Academy of Sciences, he is now its Honorary Chairman.

Evaluating Environment, Erosion and Sedimentation Aspects in Coastal Area to Determine Priority Handling (A Case Study in Jepara Regency, northern Central Java, Indonesia)

Science.gov (United States)

Wahyudi, S. I.; Adi, H. P.

2018-04-01

Many areas of the northern coastal in Central Java, Indonesia, have been suffering from damage. One of the areas is Jepara, which has been experiencing this kind of damage for 7.6 kilometres from total 72 kilometres long beach. All damages are mostly caused by coastal erosion, sedimentation, environment and tidal flooding. Several efforts have been done, such as replanting mangroves, building revetment and groins, but it still could not mitigated the coastal damage. The purposes of this study are to map the coastal damages, to analyze handling priority and to determine coastal protection model. The method used are by identifying and plotting the coastal damage on the map, assessing score of each variable, and determining the handling priority and suitable coastal protection model. There are five levels of coastal damage used in this study, namely as light damage, medium, heavy, very heavy, and extremely heavy. Based on the priority assessment of coastal damage, it needs to be followed up by designing in detail and implementing through soft structure for example mangrove, sand nourishes and hard structure, such as breakwater, groins and revetment.

Conformal polishing approach: Tool footprint analysis

Directory of Open Access Journals (Sweden)

José A Dieste

2016-02-01

Full Text Available Polishing process is one of the most critical manufacturing processes during a metal part production because it determines the final quality of the product. Free-form surface polishing is a handmade process with lots of rejected parts, scrap generation and time and energy consumption. Two different research lines are being developed: prediction models of the final surface quality parameters and an analysis of the amount of material removed depending on the polishing parameters to predict the tool footprint during the polishing task. This research lays the foundations for a future automatic conformal polishing system. It is based on rotational and translational tool with dry abrasive in the front mounted at the end of a robot. A tool to part concept is used, useful for large or heavy workpieces. Results are applied on different curved parts typically used in tooling industry, aeronautics or automotive. A mathematical model has been developed to predict the amount of material removed in function of polishing parameters. Model has been fitted for different abrasives and raw materials. Results have shown deviations under 20% that implies a reliable and controllable process. Smaller amount of material can be removed in controlled areas of a three-dimensional workpiece.

Olivine Dissolution in Seawater: Implications for CO2 Sequestration through Enhanced Weathering in Coastal Environments

Science.gov (United States)

2017-01-01

Enhanced weathering of (ultra)basic silicate rocks such as olivine-rich dunite has been proposed as a large-scale climate engineering approach. When implemented in coastal environments, olivine weathering is expected to increase seawater alkalinity, thus resulting in additional CO2 uptake from the atmosphere. However, the mechanisms of marine olivine weathering and its effect on seawater–carbonate chemistry remain poorly understood. Here, we present results from batch reaction experiments, in which forsteritic olivine was subjected to rotational agitation in different seawater media for periods of days to months. Olivine dissolution caused a significant increase in alkalinity of the seawater with a consequent DIC increase due to CO2 invasion, thus confirming viability of the basic concept of enhanced silicate weathering. However, our experiments also identified several important challenges with respect to the detailed quantification of the CO2 sequestration efficiency under field conditions, which include nonstoichiometric dissolution, potential pore water saturation in the seabed, and the potential occurrence of secondary reactions. Before enhanced weathering of olivine in coastal environments can be considered an option for realizing negative CO2 emissions for climate mitigation purposes, these aspects need further experimental assessment. PMID:28281750

Zerodur polishing process for high surface quality and high efficiency

International Nuclear Information System (INIS)

Tesar, A.; Fuchs, B.

1992-08-01

Zerodur is a glass-ceramic composite importance in applications where temperature instabilities influence optical and mechanical performance, such as in earthbound and spaceborne telescope mirror substrates. Polished Zerodur surfaces of high quality have been required for laser gyro mirrors. Polished surface quality of substrates affects performance of high reflection coatings. Thus, the interest in improving Zerodur polished surface quality has become more general. Beyond eliminating subsurface damage, high quality surfaces are produced by reducing the amount of hydrated material redeposited on the surface during polishing. With the proper control of polishing parameters, such surfaces exhibit roughnesses of < l Angstrom rms. Zerodur polishing was studied to recommend a high surface quality polishing process which could be easily adapted to standard planetary continuous polishing machines and spindles. This summary contains information on a polishing process developed at LLNL which reproducibly provides high quality polished Zerodur surfaces at very high polishing efficiencies

Lysenko affair and Polish botany.

Science.gov (United States)

Köhler, Piotr

2011-01-01

This article describes the slight impact of Lysenkoism upon Polish botany. I begin with an account of the development of plant genetics in Poland, as well as the attitude of scientists and the Polish intelligentsia toward Marxist philosophy prior to the World War II. Next I provide a short history of the introduction and demise of Lysenkoism in Polish science, with a focus on events in botany, in context with key events in Polish science from 1939 to 1958. The article outlines the little effects of Lysenkoism upon botanists and their research, as well as how botanists for the most part rejected what was often termed the "new biology." My paper shows that though Lysenko's theories received political support, and were actively promoted by a small circle of scientists and Communist party activists, they were never accepted by most botanists. Once the political climate in Poland altered after the events of 1956, Lysenko's theories were immediately abandoned.

An Overview of Biodegradation of LNAPLs in Coastal (Semi)-arid Environment.

KAUST Repository

Yadav, Brijesh Kumar

2011-02-22

Contamination of soil and water due to the release of light non-aqueous phase liquids (LNAPLs) is a ubiquitous problem. The problem is more severe in arid and semi-arid coastal regions where most of the petroleum production and related refinery industries are located. Biological treatment of these organic contaminated resources is receiving increasing interests and where applicable, can serve as a cost-effective remediation alternative. The success of bioremediation greatly depends on the prevailing environmental variables, and their remediation favoring customization requires a sound understanding of their integrated behavior on fate and transport of LNAPLs under site-specific conditions. The arid and semi-arid coastal sites are characterized by specific environmental extremes; primarily, varying low and high temperatures, high salinity, water table dynamics, and fluctuating soil moisture content. An understanding of the behavior of these environmental variables on biological interactions with LNAPLs would be helpful in customizing the bioremediation for restoring problematic sites in these regions. Therefore, this paper reviews the microbial degradation of LNAPLs in soil-water, considering the influences of prevailing environmental parameters of arid and semi-arid coastal regions. First, the mechanism of biodegradation of LNAPLs is discussed briefly, followed by a summary of popular kinetic models used by researchers for describing the degradation rate of these hydrocarbons. Next, the impact of soil moisture content, water table dynamics, and soil-water temperature on the fate and transport of LNAPLs are discussed, including an overview of the studies conducted so far. Finally, based on the reviewed information, a general conclusion is presented with recommendations for future research subjects on optimizing the bioremediation technique in the field under the aforesaid environmental conditions. The present review will be useful to better understand the

Environmental impact of condenser effluents into coastal marine environments: need for continuous monitoring

International Nuclear Information System (INIS)

Venugopal, V.P.

2015-01-01

Electric plants working on the principle of steam-water cycle require large amounts of water for condenser cooling purpose. Nuclear power plants require, on an average, about 3m 3 cooling water per minute per megawatt of electricity generated. Owning to the scarcity of large sources of freshwater for cooling, newer power plants, particularly in water-stressed parts of the world, tend to get located in coastal regions, where they can make use of the abundant seawater. However, this also poses a problem, in terms of the biofouling potential of coastal marine environments. Sessile benthic organism, which are generally present as part of the coastal marine ecosystem, extend their habitat into the cooling water system of the power plant. It is often observed that massive growth of such fouling organisms may endanger normal operation of the cooling water system, unless appropriate control measures are adopted. Presence of calcareous organisms such as mussels and barnacles in the pre-condenser sections of the power plant is a common sight; but these organisms, when lodged inside condenser tubes, can not only reduce the heat transfer efficiency but also can cause localized corrosion and tube leakage, leading of ingress of seawater into the steam-water system. It is, therefore, important that appropriate control measures are adopted to discourage the growth of the organisms. However, this needs to be done in an environmentally sustainable manner, as the cooling water is ultimately discharged back into the sea. The presentation aims to give and overview of the biofouling problems generally encountered in a typical tropical coastal power station operating in India and the chemical control measures adopted and their effectiveness. The talk also throws light on the more recent advances in biofouling control such as surface modification and use of nanotechnology which, in the foreseeable future, may provide more lasting and environmentally sustainable solutions. (author)

Bioaccumulation of Aluminium in Hydromacrophytes in Polish Coastal Lakes

Directory of Open Access Journals (Sweden)

Senze Magdalena

2015-03-01

Full Text Available The research on aluminium content was conducted in water and on aquatic flora of Polish lakes in the central part of the coast. The study included the lakes Sarbsko, Choczewskie, Bia.e, K.odno, D.brze and Salino investigated in the summer of 2013. The examined lakes belong mainly to the direct basin of the Baltic Sea. Samples of aquatic plants and lake waters were collected. In the water samples pH and electrolytic conductivity were measured. The aluminium content was determined both in water and aquatic plants. Submerged hydromacrophyte studies included Myriophyllum alterniflorum L., Potamogeton perfoliatus L. and Ceratophyllum demersum L. Emergent hydromacrophyte studies included Phragmites australis (Cav. Trin. ex Steud., Juncus bulbosus L., Iris pseudacorus L., Eleocharis palustris (L. Roem. % Schult., Phalaris arundinacea L., Carex riparia Curt., Mentha aquatic L., Stratiotes aloides L., Alisma plantago-aquatica L., Glyceria maxima (Hartman Holmb., Sagittaria sagittifolia L., Scirpus lacustris L. and Typha angustifolia L. The purpose of this investigation was the determination of the aluminium content in submerged and emergent hydromacrophytes and also the definition of their bioaccumulative abilities. The average concentration of aluminium in water was 2.68 fęg Al dm.3. The average content of aluminium in plants was 2.8015 mg Al kg.1. The bioaccumulation factor ranged from BCF=19.74 to BCF=16619. On the basis of the analysis of the aluminium content in water and aquatic plants results show that both water and plants were characterized by a moderate level of aluminium. The recorded concentrations indicate a mid-range value and are much lower than those which are quoted for a variety of surface waters in various parts of the world.

Chemical polishing of partially oxidized T-111 alloy

International Nuclear Information System (INIS)

Teaney, P.E.

1974-01-01

The specimens were pressure-mounted in Bakelite and ground through 600 grit on silicon carbide papers. The specimens were rough-polished on a vibratory polisher for 4 to 6 h, using a water slurry of one micron alumina on Texmet, followed by 0.3-μ alumina on Texmet overnight. Final polishing was accomplished by continuous swabbing with a chemical polish. A chemical polish consisting of ten parts lactic acid, four parts nitric acid, and four parts hydrofluoric acid worked well for the T-111 parent material specimens; however, in the partially oxidized specimens, considerable pitting and staining occurred in the oxygen-affected zone and in the transition zone between the oxygen-affected zone and the parent material. A chemical polish was developed for the partially oxidized specimens by adjusting the ratio of the acids to ten parts lactic acid, two parts nitric acid, and two parts hydrofluoric acid. This slowed the chemical attack on the oxygen-affected zone considerably and, with continuous swabbing, the pitting and stain could be avoided. The specimens were rinsed and checked occasionally on the metallograph to determine when the proper polish had been obtained. Some specimens required intermittent polishing times up to 1 / 2 hour. No relationship could be established between the oxygen content of the specimen and the time required for chemical polishing in the partially oxidized specimens. However, the microstructure of the transition zone was the most difficult to obtain, and specimens with uniform reaction zones across the width of the specimen polished quicker than those with the transition zone

International cooperation for integrated management of coastal regions

International Nuclear Information System (INIS)

Bosc, E.; Houlbreque, F.; Boisson, F.; Scholten, J.; Betti, M.

2010-01-01

Coastal zones which comprise < 20% of the earth surface are one of the most dynamic areas of the world. Housing more than 50% of the earth's population, the coastal zones are affected by natural and anthropogenic induced pressures which challenge the sustainability of the coastal environment and its resources. Most of the environmental pressures originate from outside the coastal zones thus requiring an inter-regional approach for coastal environmental assessments. It is one of the missions of the Marine Environment Laboratories (MEL) of the International Atomic Energy Agency to assist Member States in coastal zone management by applying nuclear and isotopic techniques. These techniques are used in many ways at MEL to enhance the understanding of marine ecosystems and to improve their management and protection. The article gives an overview of MEL's current marine coastal projects and research activities. (author)

Dangerous compounds in the dredged material from the sea - Assessment of the current approach to the evaluation of contaminations based on the data from the Polish coastal zone (the Baltic Sea).

Science.gov (United States)

Staniszewska, Marta; Boniecka, Helena

2018-05-01

It has been shown that the current approach to the assessment of contamination in the sediments obtained during the dredging works in the Baltic countries indicates the presence of "non-contaminated" dredged material. The concentration limits of heavy metals, Polycyclic Aromatic Hydrocarbons (PAHs), Polychlorinated Biphenyls (PCBs) have been exceeded only in 1% of the samples obtained during the dredging works (2005-2015) within the Polish coastal zone. After 2008, no contaminated sediments have been found. Also, in the remaining Baltic countries, sediments are very rarely contaminated. As a result of this assessment, the sediments can be stored in the sea or have a practical application. However, it has been questioned whether the large cost of determining the numerous chemical parameters is justified. It has been proposed to carry out simple screening tests. Following the preliminary screening, the decision on more detailed (and expensive) chemical tests of individual pollutants would be made. Copyright © 2018 Elsevier Ltd. All rights reserved.

Graphite Composite Panel Polishing Fixture

Science.gov (United States)

Hagopian, John; Strojny, Carl; Budinoff, Jason

2011-01-01

The use of high-strength, lightweight composites for the fixture is the novel feature of this innovation. The main advantage is the light weight and high stiffness-to-mass ratio relative to aluminum. Meter-class optics require support during the grinding/polishing process with large tools. The use of aluminum as a polishing fixture is standard, with pitch providing a compliant layer to allow support without deformation. Unfortunately, with meter-scale optics, a meter-scale fixture weighs over 120 lb (.55 kg) and may distort the optics being fabricated by loading the mirror and/or tool used in fabrication. The use of composite structures that are lightweight yet stiff allows standard techniques to be used while providing for a decrease in fixture weight by almost 70 percent. Mounts classically used to support large mirrors during fabrication are especially heavy and difficult to handle. The mount must be especially stiff to avoid deformation during the optical fabrication process, where a very large and heavy lap often can distort the mount and optic being fabricated. If the optic is placed on top of the lapping tool, the weight of the optic and the fixture can distort the lap. Fixtures to support the mirror during fabrication are often very large plates of aluminum, often 2 in. (.5 cm) or more in thickness and weight upwards of 150 lb (68 kg). With the addition of a backing material such as pitch and the mirror itself, the assembly can often weigh over 250 lb (.113 kg) for a meter-class optic. This innovation is the use of a lightweight graphite panel with an aluminum honeycomb core for use as the polishing fixture. These materials have been used in the aerospace industry as structural members due to their light weight and high stiffness. The grinding polishing fixture consists of the graphite composite panel, fittings, and fixtures to allow interface to the polishing machine, and introduction of pitch buttons to support the optic under fabrication. In its

The coastal environment affects lead and sodium uptake by the moss Hypnum cupressiforme used as an air pollution biomonitor.

Science.gov (United States)

Renaudin, Marie; Leblond, Sébastien; Meyer, Caroline; Rose, Christophe; Lequy, Emeline

2018-02-01

Several studies suggest that potential competition exists between marine cations and heavy metals for binding sites on the cell wall of mosses. This competition would impact the heavy metal concentration measured in mosses by biomonitoring programs, which may underestimate air pollution by heavy metals in a coastal environment. In the present study, we aim to identify possible mechanisms affecting lead uptake by mosses in a coastal environment, specifically, the competition between lead (Pb 2+ ) and sodium (Na + ) for binding sites in Hypnum cupressiforme (Hc). We also compared the response of continental and coastal Hc populations to Pb 2+ exposure by immersing the moss samples in artificial solutions that comprised six experimental treatments and subsequently locating and quantifying Pb 2+ and Na + using the sequential elution technique and X-ray microanalyses with a scanning electron microscope. We demonstrated that high concentrations of Pb 2+ prevented Na + from binding to the cell wall. We also examined the effect of the salt acclimation of Hc on Pb 2+ and Na + accumulation. Coastal Hc populations accumulated more Na and less Pb than continental Hc populations in all treatments. Moreover, our results showed treatment effects on the intra/extracellular distribution of Na + , as well as site. This feedback on the influence of salt stress tolerance on Pb 2+ uptake by mosses requires further study and can be investigated for other heavy metals, leading to a better use of mosses as biomonitoring tools. Copyright © 2017 Elsevier Ltd. All rights reserved.

Protecting biodiversity in coastal environments: Introduction and overview

International Nuclear Information System (INIS)

Beatley, T.

1991-01-01

Much less attention has been paid in recent years to the threats to coastal and marine biodiversity, compared to biodiversity in more terrestrial habitats. The tremendous biodiversity at risk and the severity and magnitude of the pressures being exerted on coastal habitats suggest the need for much greater attention to be focused here by both the policy and scientific communities. The threats to coastal biodiversity are numerous and include air and water pollution; over exploitation and harvesting; the introduction of exotic species; the dramatic loss of habitat due to urbanization, agricultural expansion, and other land use changes; and the potentially serious effects of global climate change. These threats suggest the need for swift action at a number of jurisdictional and governmental levels. Major components of such an effort are identified and described. These include the need for comprehensive management approaches, the expansion of parks and protected areas, restoration and mitigation, multinational and international initiatives, and efforts to promote sustainable development and sustainable lifestyles. Suggestions for future research are also provided

Coastal tourism, environment, and sustainable local development

Digital Repository Service at National Institute of Oceanography (India)

Noronha, L.; Lourenco, N.; Lobo-Ferreira, J.P.; Lieopart, A.; Feoli, E.; Sawkar, K.; Chachadi, A.

This book is among the products of a research project entitled "Measuring, monitoring and managing sustainability: The coastal dimension" INCO-DC programme over the period 1998-2002. The contributions reflect a range of disciplines including...

APS 3D: a new benchmark in aspherical polishing

Science.gov (United States)

Gauch, Daniel; Mikulic, Dalibor; Veit, Christian

2017-10-01

The APS 3D system performs polishing and form correction in one step in order to reduce overall process time, reduce the number of polishing steps required and eliminate the need for highly skilled operators while providing a repeatable polishing process. This new 3D Polishing system yields better surface quality, and a better slope error, automatically determining the optimum speeds, feed rates and polish pressures to achieve a deterministic process based on the required quality parameters input by the operator. The process flow is always the same to ensure consistent quality and target quality values are defined before polishing begins.

Polish Americans. Second, Revised Edition.

Science.gov (United States)

Lopata, Helen Znaniecka

This book examines Polonia, the Polish ethnic community in America created by three giant waves of immigration between 1880 and 1990. The complicated history of this ethnic group is reflected in the lives of increasing numbers of Polish Americans, including recent immigrants brought by political and economic changes, as they achieve middle class…

Experimental Polish-Lithuanian Corpus with the Semantic Annotation Elements

Directory of Open Access Journals (Sweden)

Danuta Roszko

2015-06-01

Full Text Available Experimental Polish-Lithuanian Corpus with the Semantic Annotation Elements In the article the authors present the experimental Polish-Lithuanian corpus (ECorpPL-LT formed for the idea of Polish-Lithuanian theoretical contrastive studies, a Polish-Lithuanian electronic dictionary, and as help for a sworn translator. The semantic annotation being brought into ECorpPL-LT is extremely useful in Polish-Lithuanian contrastive studies, and also proves helpful in translation work.

Assessing operability of a novel polisher arrangement using MMS

International Nuclear Information System (INIS)

Shor, S.W.W.

1987-01-01

A condensate polisher is intended to remove both particulate matter and ionic material from the condensate. Condensate polishers have normally been placed directly in the condensate system downstream of the condensate pumps. This inline location has certain disadvantages. These disadvantages are discussed. Placing the polisher in a sidestream location, where water is removed from the condensate system, pumped through the polisher, and then returned to the condensate system provides a solution to these disadvantages. Several possible types of sidestream installations is described. This has a polisher taking unpolished condensate from one compartment from one compartment of a divided hotwell in a specially modified condenser and returning polished condensate to the other compartment. The polisher is supplied by its own dedicated pumps, which have a head requirement sufficient only to overcome the pressure drop through the polisher circuit at a flow rate of 110% of maximum condensate flow. This concept is very attractive but has not yet been tested even though it is being installed in several new units. A simulation was, therefore, performed using MMS to provide confidence that this particular sidestream polisher arrangement was operationally viable

Valuing the risk reduction of coastal ecosystems in data poor environments: an application in Quintana Roo, Mexico

Science.gov (United States)

Reguero, B. G.; Toimil, A.; Escudero, M.; Menendez, P.; Losada, I. J.; Beck, M. W.; Secaira, F.

2016-12-01

Coastal risks are increasing from both economic growth and climate change. Understanding such risks is critical to assessing adaptation needs and finding cost effective solutions for coastal sustainability. Interest is growing in the role that nature-based measures can play in adapting to climate change. Here we apply and advance a framework to value the risk reduction potential of coastal ecosystems, with an application in a large scale domain, the coast of Quintana Roo, México, relevant for coastal policy and management, but with limited data. We build from simple to use open-source tools. We first assess the hazards using stochastic simulation of historical tropical storms and inferring two scenarios of future climate change for the next 20 years, which include the effect of sea level rise and changes in frequency and intensity of storms. For each storm, we obtain wave and surge fields using parametrical models, corrected with pre-computed static wind surge numerical simulations. We then assess losses on capital stock and hotels and calculate total people flooded, after accounting for the effect of coastal ecosystems in reducing coastal hazards. We inferred the location of major barrier reefs and dune systems using available satellite imagery, and sections of bathymetry and elevation data. We also digitalized the surface of beaches and location of coastal structures from satellite imagery. In a poor data environment, where there is not bathymetry data for the whole of the region, we inferred representative coastal profiles of coral reef and dune sections and validated at available sections with measured data. Because we account for the effect of reefs, dunes and mangroves in coastal profiles every 200 m of shoreline, we are able to estimate the value of such ecosystems by comparing with benchmark simulations when we take them out of the propagation and flood model. Although limited in accuracy in comparison to more complex modeling, this approach is able to

Laser polishing of additive manufactured Ti alloys

Science.gov (United States)

Ma, C. P.; Guan, Y. C.; Zhou, W.

2017-06-01

Laser-based additive manufacturing has attracted much attention as a promising 3D printing method for metallic components in recent years. However, surface roughness of additive manufactured components has been considered as a challenge to achieve high performance. In this work, we demonstrate the capability of fiber laser in polishing rough surface of additive manufactured Ti-based alloys as Ti-6Al-4V and TC11. Both as-received surface and laser-polished surfaces as well as cross-section subsurfaces were analyzed carefully by White-Light Interference, Confocal Microscope, Focus Ion Beam, Scanning Electron Microscopy, Energy Dispersive Spectrometer, and X-ray Diffraction. Results revealed that as-received Ti-based alloys with surface roughness more than 5 μm could be reduce to less than 1 μm through laser polishing process. Moreover, microstructure, microhardness and wear resistance of laser-polished zone was investigated in order to examine the thermal effect of laser polishing processing on the substrate of additive manufactured Ti alloys. This proof-of-concept process has the potential to effectively improve the surface roughness of additive manufactured metallic alloy by local polishing method without damage to the substrate.

Toward a Global Classification of Coastal Anthromes

Directory of Open Access Journals (Sweden)

Eli D. Lazarus

2017-02-01

Full Text Available Given incontrovertible evidence that humans are the most powerful agents of environmental change on the planet, research has begun to acknowledge and integrate human presence and activity into updated descriptions of the world’s biomes as “anthromes”. Thus far, a classification system for anthromes is limited to the terrestrial biosphere. Here, I present a case for the consideration and validity of coastal anthromes. Every coastal environment on Earth is subject to direct and indirect human modification and disturbance. Despite the legacy, ubiquity, and pervasiveness of human interactions with coastal ecosystems, coastal anthromes still lack formal definition. Following the original argument and framework for terrestrial anthromes, I outline a set of coastal anthrome classifications that dovetail with terrestrial and marine counterparts. Recognising coastal environments as complex and increasingly vulnerable anthropogenic systems is a fundamental step toward understanding their modern dynamics—and, by extension, realising opportunities for and limits to their resilience.

Eogenetic karst, glacioeustatic cave pools and anchialine environments on Mallorca Island: a discussion of coastal speleogenesis.

Directory of Open Access Journals (Sweden)

Angel Ginès

2007-07-01

Full Text Available Coastal karst is characterized by special geomorphologic and hydrodynamic conditions as well as by peculiar sedimentary, geochemical, and biospeleological environments. Generally, the more distinctive karstic features produced near the coastline are strongly influenced by sea-level changes, which generate a broad set of interactions between littoral processes and karst development. The glacioeustatic rises and falls of sea level affected the littoral karst in different ways, namely: vertical and horizontal shifts in the shoreline position, changes in elevation of the local water table, and vertical displacements of the halocline. Most eogenetic karsts have been subjected over long time spans to repeated changes of a variety of vertically-zoned geochemical environments: vadose, phreatic meteoric-water, brackish mixing-waters and even marine water. Many coastal caves appear to be passively drowned by Holocene sea-level rise, and to contain glacioeustatic pools of varied size where the current water table intersects formerly air-filled chambers or passages. These coastal phreatic waters are controlled by sea level and fluctuate with tides. Significantly, features such as phreatic speleothems that are able to record ancient sea levels occur closely associated to the surface of the pools. The cave pools are brackish or even marine anchialine environments that contain remarkable communities of troglobitic stygofauna. All of these aspects can be studied in detail along the southern and eastern coast of Mallorca Island owing to the widespread outcrop of Upper Miocene calcarenites, in which the development of eogenetic karst features started approximately 6 Ma ago, at the end of Messinian times. Some outstanding coastal caves result and include the celebrated Coves del Drac (explored by E.A. Martel in 1896, the labyrinthine Cova des Pas de Vallgornera (more than 30 km in length and the recently explored Cova de sa Gleda (whose submerged passages exceed

The attractiveness of family medicine among Polish medical students.

Science.gov (United States)

Gowin, Ewelina; Horst-Sikorska, Wanda; Michalak, Michał; Avonts, Dirk; Buczkowski, Krzysztof; Lukas, Witold; Korman, Tomasz; Litwiejko, Alicja; Chlabicz, Sławomir

2014-06-01

In many developed countries tuning supply and demand of medical doctors is a continuous challenge to meet the ever changing needs of community and individual patients. The long study period for medical doctors creates the opportunity to observe the current career preferences of medical students and evolution in time. To investigate the career choices of Polish students in different stages of their medical education. Medical students at five Polish medical universities were questioned about their career aspirations in the first, third and sixth year. A total of 2020 students were recruited for the survey. Among first year students 17% preferred family medicine as final career option, compared to 20% in the third year, and 30% in the sixth year (significant trend, P family medicine: 71% women versus 62% women in the group with a preference for a non-family medicine orientation (P = 0.008). Medical students rejecting a career as a family doctor stated that the impossibility to work in a hospital environment was the determining factor. The opportunity for professional development seems to be an important determining factor in the choice of a medical specialty in Poland. The proportion of Polish students choosing family medicine increases during their progress in medical education, with one third of students interested in a career in family medicine by year six.

Concepts and theoretical specifications of a Coastal Vulnerability Dynamic Simulator (COVUDS): A multi-agent system for simulating coastal vulnerability towards management of coastal ecosystem services

Science.gov (United States)

Orencio, P. M.; Endo, A.; Taniguchi, M.

2014-12-01

Disaster-causing natural hazards such as floods, erosions, earthquakes or slope failures were particularly observed to be concentrated in certain geographical regions. In the Asia-pacific region, coastal ecosystems were suffering because of perennial threats driven by chronic fluctuations in climate variability (e.g., typhoons, ENSO), or by dynamically occurring events (e.g., earthquakes, tsunamis). Among the many people that were found prone to such a risky condition were the ones inhabiting near the coastal areas. Characteristically, aside from being located at the forefront of these events, the coastal communities have impacted the resource by the kind of behavioral patterns they exhibited, such as overdependence and overexploitation to achieve their wellbeing. In this paper, we introduce the development of an approach to an assessment of the coupled human- environment using a multi- agent simulation (MAS) model known as Coastal Vulnerability Dynamic Simulator (COVUDS). The COVUDS comprised a human- environmental platform consisting multi- agents with corresponding spatial- based dynamic and static variables. These variables were used to present multiple hypothetical future situations that contribute to the purpose of supporting a more rational management of the coastal ecosystem and their environmental equities. Initially, we present the theoretical and conceptual components that would lead to the development of the COVUDS. These consisted of the human population engaged in behavioral patterns affecting the conditions of coastal ecosystem services; the system of the biophysical environment and changes in patches brought by global environment and local behavioral variations; the policy factors that were important for choosing area- specific interventions; and the decision- making mechanism that integrates the first three components. To guide a future scenario-based application that will be undertaken in a coastal area in the Philippines, the components of the

Experimental Evaluation of Optically Polished Aluminum Panels on the Deep Space Network's 34 Meter Antenna

Science.gov (United States)

Vilnrotter, V.

2011-01-01

The potential development of large aperture ground?based "photon bucket" optical receivers for deep space communications has received considerable attention recently. One approach currently under investigation is to polish the aluminum reflector panels of 34?meter microwave antennas to high reflectance, and accept the relatively large spotsize generated by state of?the?art polished aluminum panels. Theoretical analyses of receiving antenna pointing, temporal synchronization and data detection have been addressed in previous papers. Here we describe the experimental effort currently underway at the Deep Space Network (DSN) Goldstone Communications Complex in California, to test and verify these concepts in a realistic operational environment. Two polished aluminum panels (a standard DSN panel polished to high reflectance, and a custom designed aluminum panel with much better surface quality) have been mounted on the 34 meter research antenna at Deep?Space Station 13 (DSS?13), and a remotely controlled CCD camera with a large CCD sensor in a weather?proof container has been installed next to the subreflector, pointed directly at the custom polished panel. The point?spread function (PSF) generated by the Vertex polished panel has been determined to be smaller than the sensor of the CCD camera, hence a detailed picture of the PSF can be obtained every few seconds, and the sensor array data processed to determine the center of the intensity distribution. In addition to estimating the center coordinates, expected communications performance can also been evaluated with the recorded data. The results of preliminary pointing experiments with the Vertex polished panel receiver using the planet Jupiter to simulate the PSF generated by a deep?space optical transmitter are presented and discussed in this paper.

Production of rare earth polishing powders in Russia

International Nuclear Information System (INIS)

Kosynkin, V.D.; Ivanov, E.N.; Kotrekhov, V.A.; Shtutza, M.G.; Grabko, A.I.

1998-01-01

Full text: Russia is a potent producer of polishing powders made of rare earth material presented as an extensive and well developed base. Considering the reserves, the facilities predisposition and the polishing agent (cerium dioxide) content the chief mineral source is loparite, apatite and monazite. The production of rare earth polishing powders is based on specially developed continuous technological processes, corrosion-proof equipment, ensuring a high and stable production quality. A special attention is paid to the radiation safety of the powders. The initial material for the rare earth polishing powders based on loparite is the fusion cake of rare earth chlorides obtained at that mineral chlorination. The technology of the polishing powder production from the REE fusion cake includes the following stages: dissolution of the REE fusion cake chlorides; - thorough cleaning of the REE fusion cake chlorides from radioactive and non-rare-earth impurities; chemical precipitation of REE carbonates, obtaining middlings with proper material and granulometric composition, thermal treatment of precipitated carbonates followed with the operations of drying and roasting; classification of roasted oxides, obtaining end products - polishing powders. The production of fluorine-containing powders includes the stage of their fluorination after the stage of carbonate precipitation. The stabilizing doping can be introduced both into the middlings during one of the technological process of powders manufacturing and into the end product. Rare earth polishing powders are manufactured in Russia by the Share Holding Company 'Chepetz Mechanical Plant' (ChMP Co.), the city of Glasov. The plant produces a number of polishing materials, such as; polishing powder Optinol, containing at least 50% by mass of cerium dioxide, used in the mass production of optical and other articles; polishing powder Optinol-10 with doping to improve the sedimentary and aggregate stability of the solid phase

Behaviour of Radium in coastal marine water of India - Behaviour of Radium in coastal marine environment of India

Energy Technology Data Exchange (ETDEWEB)

Jha, S.K.; Sartandel, S.; Tripathi, R.M. [Environmental Radioactivity measurement Section, Health Physics Division, Bhabha Atomic Research Centre, Mumbai-400085 (India)

2014-07-01

Kanyakumari which comprises the high natural background region reflects different ratio varying from 3.5 to 6.9. The Higher concentration ratio of {sup 228}Ra to {sup 226}Ra in coastal water of Rameswaram and Kanyakumari reflecting {sup 232}Th rich sources of terrigenous material in regions. The findings supported the fact that the area also comes under natural high radiation background at the south west of Indian peninsula due to the presence of heavy mineral containing monazite in the beach sand. In Arabian sea, {sup 226}Ra activity concentration were observed to be in the range of 1.5-2.9 Bq m{sup -3} with a mean of 2.2 Bq m{sup -3} while {sup 228}Ra was in the range of 2.5-8.6 Bq m{sup -3} with mean of 4.9 Bq m{sup -3}. The observed ratio at locations in Arabian sea indicates restricted circulation pattern of sea water. The activity concentrations for radium isotopes were found within the reported range of values from other coastal area. The radioactive database can be used as tracer for understanding processes and for assessing radioactivity inventory in the coastal marine environment in India. (authors)

Pollution of coastal seas

Digital Repository Service at National Institute of Oceanography (India)

Varkey, M.J.

Pollution of various environments is a consequence of population growth and industrialisation. Coastal seas form part of marine environment and are very rich in minerals, crude oil fishes etc. They are also being used for disposal of wastes from...

Polishing of silicon based advanced ceramics

Science.gov (United States)

Klocke, Fritz; Dambon, Olaf; Zunke, Richard; Waechter, D.

2009-05-01

Silicon based advanced ceramics show advantages in comparison to other materials due to their extreme hardness, wear and creep resistance, low density and low coefficient of thermal expansion. As a matter of course, machining requires high efforts. In order to reach demanded low roughness for optical or tribological applications a defect free surface is indispensable. In this paper, polishing of silicon nitride and silicon carbide is investigated. The objective is to elaborate scientific understanding of the process interactions. Based on this knowledge, the optimization of removal rate, surface quality and form accuracy can be realized. For this purpose, fundamental investigations of polishing silicon based ceramics are undertaken and evaluated. Former scientific publications discuss removal mechanisms and wear behavior, but the scientific insight is mainly based on investigations in grinding and lapping. The removal mechanisms in polishing are not fully understood due to complexity of interactions. The role of, e.g., process parameters, slurry and abrasives, and their influence on the output parameters is still uncertain. Extensive technological investigations demonstrate the influence of the polishing system and the machining parameters on the stability and the reproducibility. It is shown that the interactions between the advanced ceramics and the polishing systems is of great relevance. Depending on the kind of slurry and polishing agent the material removal mechanisms differ. The observed effects can be explained by dominating mechanical or chemo-mechanical removal mechanisms. Therefore, hypotheses to state adequate explanations are presented and validated by advanced metrology devices, such as SEM, AFM and TEM.

Study on chemical mechanical polishing of silicon wafer with megasonic vibration assisted.

Science.gov (United States)

Zhai, Ke; He, Qing; Li, Liang; Ren, Yi

2017-09-01

Chemical mechanical polishing (CMP) is the primary method to realize the global planarization of silicon wafer. In order to improve this process, a novel method which combined megasonic vibration to assist chemical mechanical polishing (MA-CMP) is developed in this paper. A matching layer structure of polishing head was calculated and designed. Silicon wafers are polished by megasonic assisted chemical mechanical polishing and traditional chemical mechanical polishing respectively, both coarse polishing and precision polishing experiments were carried out. With the use of megasonic vibration, the surface roughness values Ra reduced from 22.260nm to 17.835nm in coarse polishing, and the material removal rate increased by approximately 15-25% for megasonic assisted chemical mechanical polishing relative to traditional chemical mechanical polishing. Average Surface roughness values Ra reduced from 0.509nm to 0.387nm in precision polishing. The results show that megasonic assisted chemical mechanical polishing is a feasible method to improve polishing efficiency and surface quality. The material removal and finishing mechanisms of megasonic vibration assisted polishing are investigated too. Copyright © 2017 Elsevier B.V. All rights reserved.

Inputs and distributions of synthetic musk fragrances in an estuarine and coastal environment; a case study

International Nuclear Information System (INIS)

Sumner, Nicola R.; Guitart, Carlos; Fuentes, Gustavo; Readman, James W.

2010-01-01

Synthetic musks are ubiquitous contaminants in the environment. Compartmental distributions (dissolved, suspended particle associated and sedimentary) of the compounds throughout an axial estuarine transect and in coastal waters are reported. High concentrations of Galaxolide (HHCB) and Tonalide (AHTN) (987-2098 ng/L and 55-159 ng/L, respectively) were encountered in final effluent samples from sewage treatment plants (STPs) discharging into the Tamar and Plym Estuaries (UK), with lower concentrations of Celestolide (ADBI) (4-13 ng/L), Phantolide (AHMI) (6-9 ng/L), musk xylene (MX) (4-7 ng/L) and musk ketone (MK) (18-30 ng/L). Rapid dilution from the outfalls is demonstrated with resulting concentrations of HHCB spanning from 5 to 30 ng/L and those for AHTN from 3 to 15 ng/L. The other musks were generally not detected in the estuarine and coastal waters. The suspended particulate matter (SPM) and sedimentary profiles and compositions (HHCB:AHTN ratios) generally reflect the distribution in the water column with highest concentrations adjacent to sewage outfalls. - Synthetic musks were determined in coastal environmental compartments along an estuarine transect indicating their ubiquitous occurrence in transitional waters.

Inputs and distributions of synthetic musk fragrances in an estuarine and coastal environment; a case study

Energy Technology Data Exchange (ETDEWEB)

Sumner, Nicola R. [School of Earth, Ocean and Environmental Science, University of Plymouth, Drake Circus, Plymouth PL4 8AA (United Kingdom); Plymouth Marine Laboratory, Prospect Place, The Hoe, Plymouth PL1 3DH (United Kingdom); Guitart, Carlos, E-mail: guitart.carlos@gmail.co [Plymouth Marine Laboratory, Prospect Place, The Hoe, Plymouth PL1 3DH (United Kingdom); Fuentes, Gustavo [Instituto Universitario de Tecnologia del Mar (IUTEMAR), Fundacion La Salle de Ciencias Naturales, Margarita Island (Venezuela, Bolivarian Republic of); Readman, James W. [Plymouth Marine Laboratory, Prospect Place, The Hoe, Plymouth PL1 3DH (United Kingdom)

2010-01-15

Synthetic musks are ubiquitous contaminants in the environment. Compartmental distributions (dissolved, suspended particle associated and sedimentary) of the compounds throughout an axial estuarine transect and in coastal waters are reported. High concentrations of Galaxolide (HHCB) and Tonalide (AHTN) (987-2098 ng/L and 55-159 ng/L, respectively) were encountered in final effluent samples from sewage treatment plants (STPs) discharging into the Tamar and Plym Estuaries (UK), with lower concentrations of Celestolide (ADBI) (4-13 ng/L), Phantolide (AHMI) (6-9 ng/L), musk xylene (MX) (4-7 ng/L) and musk ketone (MK) (18-30 ng/L). Rapid dilution from the outfalls is demonstrated with resulting concentrations of HHCB spanning from 5 to 30 ng/L and those for AHTN from 3 to 15 ng/L. The other musks were generally not detected in the estuarine and coastal waters. The suspended particulate matter (SPM) and sedimentary profiles and compositions (HHCB:AHTN ratios) generally reflect the distribution in the water column with highest concentrations adjacent to sewage outfalls. - Synthetic musks were determined in coastal environmental compartments along an estuarine transect indicating their ubiquitous occurrence in transitional waters.

STUDY OF POLISHING AISI 316L WITH STRUCTURED ABRASIVE

Directory of Open Access Journals (Sweden)

François GOOSSENS

2015-05-01

Full Text Available Finishing process like polishing is usually used to obtain high quality mechanical surface characteristics such as texture and roughness. These operations are mainly handmade and need highly trained operators thus limiting their repeatability and profitability. To optimize the industrialization of the polishing process, it is therefore necessary to modelize the process to built efficient parameter database. The aim of this study is to characterise the polishing of 316L stainless steel with structured abrasive belts. The geometric data of the belts are given, and we then propose a model to determine material removal. An experimental test bench is set up to test this model and characterise the polishing process in terms of forces. It produces samples for different polishing conditions. The different polished surfaces are then analyzed thanks to the roughness and the wettability. Using experimental designs, we are able to validate the proposed model and identify the parameters that influence a polishing operation.

Technological Advances of Robot Assisted Polishing

DEFF Research Database (Denmark)

Lazarev, Ruslan; Top, Søren; Grønbæk, Jens

The efficient polishing of surfaces is very important in mould and die industry. Fine abrasive processes are widely used in industry for the first steps for the production of tools of high quality in terms of finishing accuracy, form and surface integrity. While manufacturing of most components....... In this study, the influence of polishing parameters and type of polishing media on fine abrasive surface finishing is investigated. Experimental study is covering 2D rotational surfaces that is widespread used in mould and dies industry. Application of it is essential for process intelligent control, condition...... monitoring and quality inspection....

Experimental Evaluation of the "Polished Panel Optical Receiver" Concept on the Deep Space Network's 34 Meter Antenna

Science.gov (United States)

Vilnrotter, Victor A.

2012-01-01

The potential development of large aperture ground-based "photon bucket" optical receivers for deep space communications has received considerable attention recently. One approach currently under investigation proposes to polish the aluminum reflector panels of 34-meter microwave antennas to high reflectance, and accept the relatively large spotsize generated by even state-of-the-art polished aluminum panels. Here we describe the experimental effort currently underway at the Deep Space Network (DSN) Goldstone Communications Complex in California, to test and verify these concepts in a realistic operational environment. A custom designed aluminum panel has been mounted on the 34 meter research antenna at Deep-Space Station 13 (DSS-13), and a remotely controlled CCD camera with a large CCD sensor in a weather-proof container has been installed next to the subreflector, pointed directly at the custom polished panel. Using the planet Jupiter as the optical point-source, the point-spread function (PSF) generated by the polished panel has been characterized, the array data processed to determine the center of the intensity distribution, and expected communications performance of the proposed polished panel optical receiver has been evaluated.

Assessment of the environmental status of the coastal and marine aquatic environment in Europe: A plea for adaptive management

NARCIS (Netherlands)

Laane, R.W.P.M.; Slijkerman, D.M.E.; Vethaak, A.D.; Schobben, J.H.M.

2012-01-01

Policymakers and managers have a very different philosophy and approach to achieving healthy coastal and marine ecosystems than scientists. In this paper we discuss the evolution of the assessment of the chemical status in the aquatic environment and the growing rift between the political intention

The Polish Mother on the defensive? The transformation of the myth and its impact on the motherhood of Polish women

Directory of Open Access Journals (Sweden)

Agnieszka Imbierowicz

2012-06-01

Full Text Available The subject of this presentation is the attempt to define and to present the origins, socio-cultural content and the evolution of The Polish Mother myth, present in the polish national consciousness. The author tries to show how this myth was born, what functions it fulfilled and what forms it took in the changing historical and social reality, from the moment of loss of independence, through a period of real socialism, until the present day. The impact of this myth in the lives of real women and their motherhood is taken into consideration. Then, the author comparing the results of the latest polish sociological researches on the family and its transformation, and transformation of value systems together with theories about the specifics of life in the period of postmodernity, wonders whether it’s time to deconstruct the myth of The Polish Mother, because it does not fit the conditions of today’s world, which is characterized, above all, by the apotheosis of individuality, self-realization and freedom, or perhaps in polish society there is still strong traditionalism in thinking about motherhood, and the myth of The Polish Mother is still alive?

Effect of polishing instruments and polishing regimens on surface topography and phase transformation of monolithic zirconia: An evaluation with XPS and XRD analysis.

Science.gov (United States)

Al-Haj Husain, Nadin; Camilleri, Josette; Özcan, Mutlu

2016-12-01

Polishing procedures might alter monolithic zirconia (MZ) surface resulting in phase changes that can be deleterious for clinical performance and antagonist tooth wear. This study investigated the topographical features and phase transformation in MZ after polishing with different regimens simulating the clinical workflow. ​ MZ specimens (Katana Zirconia HT, Kuraray-Noritake) (12×12×1.8 mm(3)) were grinded and polished using one of the five systems assessed: BG: Silicone carbide polishers (Brownie, Greenie, Super Greenie); CG: Diamond impregnated ceramic polisher kit (Ceragloss); EV: Synthetically bonded grinder interspersed with diamond (EVE Kit); SL: Urethane coated paper with aluminium oxide grits (Soflex Finishing and Polishing System Kit) and DB: Diamond bur (8 µm). Polished specimens were initially roughened with 220 µm diamond burs (Grinding Bur-GB) (10 s, 160.000160,000 rpm) and considered for baseline measurements. Polishing regimens were performed for 10 s using a slow-speed hand piece under water-cooling except for SL, in a custom made device (750 g; 5000 and 75,000 rpm). Surface roughnesses, phase changes (XRD) were assessed, surface characterization was performed (SEM, EDS). The highest roughness was obtained with the EV system (1.11 µm) compared to those of other systems (0.13-0.4 µm) (pθ and minor peak at 34.94°2θ. While GB, CG, EV, SL and DB exhibited a peak shift to the left, BG demonstrated a right peak shift on the 2θ scale. Monoclinic phase change was not noted in any of the groups. All polishing methods, except BG, exhibited a peak shift towards the lower angles of the 2-theta scale. Since the peak shifts were in the order of fractions of an angle they are attributed to stress formation rather than a phase change in the material. Thus, all polishing systems tested may not be detrimental for the phase transformation of MZ. EV system resulted in the highest roughness and none of the polishing regimens restored the polishability to the

Integrated subsurface water solutions for coastal environments through integrated pump&treat and aquifer storage and recovery (ASR) schemes

Science.gov (United States)

Perdikaki, Martha; Kallioras, Andreas; Christoforidis, Christophoros; Iossifidis, Dimitris; Zafeiropoulos, Anastasios; Dimitriadis, Klisthenis; Makropoulos, Christos; Raat, Klaasjan; van den Berg, Gerard

2016-04-01

Coastal wetlands in semi-arid regions, as in Circum-Mediterranean, are considered important ecosystems that provide valuable services to human population and the environment, such as: flood protection, erosion control, wildlife habitat, water quality, recreation and carbon sequestration. Un-managed surface and groundwater exploitation in these areas usually leads to deterioration of such sensitive ecosystems by means of water resources degradation and/or increased salinity. Groundwater usually plays a vital role for the sustainability of these hydrological systems, as the underlying aquifers operate as regulators for both quantity and quality of their waters. Multi-layer and multi-objective Managed Aquifer Recharge (MAR) systems can be proved effective groundwater engineered solutions for the restoration of deteriorated coastal wetlands in semi- and arid regions. The plain of Marathon is a typical Mediterranean environment that hosts a naturally occurring -and today degraded- coastal wetland with the characteristics of a distinct ecosystem linked to a typical coastal hydrogeological system of a semi-arid region; and therefore can serve as a model for similar systems world-wide. The geo-hydrological setting of the area involves a multi-layer aquifer system consisting of (i) an upper un-consolidated formation of depositional unit dominated mostly by fluvial sediments and (ii) the surrounding and underlying karstified marbles; both being linked to the investigated wetland and also subjected to seawater encroachment. A smart engineered MAR system via an optimised Pump & Treat system integrated with an Aquifer Storage and Recovery (ASR) scheme in this area would include the abstraction of brackish groundwater from the deeper karst aquifer at a location close to the shoreline and direct treatment with Reverse Osmosis (RO). for desalination. Two-fold re-use scheme of the purified effluent can then be engineered for (i) the restoration of the coastal wetland; and (ii

Chemical Mechanical Polishing Optimization for 4H-SiC

National Research Council Canada - National Science Library

Neslen, Craig

2000-01-01

.... Preliminary chemical mechanical polishing (CMP) studies of 1 3/8" 4H-SiC wafers were performed in an attempt to identify the polishing parameter values that result in a maximum material removal rate and thus reduce substrate polishing time...

Polish Qualitative Sociology: The General Features and Development

OpenAIRE

Konecki, Krzysztof Tomasz

2005-01-01

The article explores the development of Polish qualitative sociology in Poland by presenting its main intellectual routes and some of the general features of Polish sociology. Romanticism and inductionmethod are crucial elements for the development of this discipline in Poland and contribute to its. unigueness. The role of Florian Znaniecki in creating the Polish qualitative sociology is also underlined. Krzysztof Konecki

Sensing roughness and polish direction

DEFF Research Database (Denmark)

Jakobsen, Michael Linde; Olesen, Anders Sig; Larsen, Henning Engelbrecht

2016-01-01

As a part of the work carried out in a project supported by the Danish Council for Technology and Innovation, we have investigated the option of smoothing standard CNC-machined surfaces. In the process of constructing optical prototypes, involving custom-designed optics, the development cost...... and time consumption can become prohibitive in a research budget. Machining the optical surfaces directly is expensive and time consuming. Alternatively, a more standardized and cheaper machining method can be used, calling for the object to be manually polished. During the polishing process, the operator...... needs information about the RMS-value of the surface roughness and the current direction of the scratches introduced by the polishing process. The RMS-value indicates to the operator how far he is from the final finish, and the scratch orientation is often specified by the customer in order to avoid...

Proceedings of the 21. Autumn School of Polish Radiation Research Society '' Chernobyl - 20 years after. Contamination of food and the environment and health effects. Nuclear power industry: for and against ''

International Nuclear Information System (INIS)

Pachocki, K.

2006-01-01

21. Autumn Schools of the Polish Radiation Research Society held in 2006 '' Chernobyl - 20 years after. Contamination of food and the environment and health effects '' consisted of 35 lectures and scientific contributions. All aspects concerning accident in the Chernobyl NPP: technical, environmental, medical (direct and prolonged, as well) and safety problems were presented and discussed. Perspectives for the development of the nuclear power industry in Poland were also shown

Effects of polishing procedures on color stability of composite resins

Directory of Open Access Journals (Sweden)

Ahmet Umut Güler

2009-04-01

Full Text Available The purpose of this study was to investigate the effect of different polishing methods on color stability of posterior, universal and nanohybrid composite resin restorative materials upon exposure to a staining agent. Twenty-five specimens were prepared for each of 5 different composite resins (Filtek Z250, Filtek P60, Quadrant LC, Grandio and Filtek Supreme. Specimens were divided into 5 groups and different polishing procedures, including polishing discs (Pd, polishing discs then diamond polishing paste (PdP, polishing discs then a liquid polishing system (Biscover (PdB, and combinations of these (PdPB were used. Unpolished specimens served as the control (C. The specimens were stored for 48 h in a coffee solution. The color of all specimens was measured before and after exposure with a colorimeter, and total color change (DE* were calculated. The data were analyzed with a two-way ANOVA and the means were compared by Tukey HSD test (a=0.05. The lowest color difference was observed in the groups PdP and C, while the highest color difference was observed in PdPB, and PdB. When comparing the five different restorative materials, no significant difference was observed between FiltekP60 and FiltekZ250, and these materials demonstrated significantly less color change than Quadrant LC and the nanohybrid materials (Grandio, Filtek Supreme. The posterior (Filtek P60 and universal (Filtek Z250 composite resin restorative materials, which do not contain tetraethyleneglycol dimethacrylate (TEGDMA, were found to be less stainable than the nanohybrid (Grandio, Filtek Supreme and universal (Quadrant LC composite resins, which contain TEGDMA. The use of diamond polishing paste after polishing with polishing discs significantly decreased staining when compared to the groups that used polishing discs alone, for all restorative materials tested. The highest color change values were obtained for the specimens that were polished with the Biscover liquid polish

Coastal Thematic Exploitation Platform (C-TEP): An innovative and collaborative platform to facilitate Big Data coastal research

Science.gov (United States)

Tuohy, Eimear; Clerc, Sebastien; Politi, Eirini; Mangin, Antoine; Datcu, Mihai; Vignudelli, Stefano; Illuzzi, Diomede; Craciunescu, Vasile; Aspetsberger, Michael

2017-04-01

The Coastal Thematic Exploitation Platform (C-TEP) is an on-going European Space Agency (ESA) funded project to develop a web service dedicated to the observation of the coastal environment and to support coastal management and monitoring. For over 20 years ESA satellites have provided a wealth of environmental data. The availability of an ever increasing volume of environmental data from satellite remote sensing provides a unique opportunity for exploratory science and the development of coastal applications. However, the diversity and complexity of EO data available, the need for efficient data access, information extraction, data management and high spec processing tools pose major challenges to achieving its full potential in terms of Big Data exploitation. C-TEP will provide a new means to handle the technical challenges of the observation of coastal areas and contribute to improved understanding and decision-making with respect to coastal resources and environments. C-TEP will unlock coastal knowledge and innovation as a collaborative, virtual work environment providing access to a comprehensive database of coastal Earth Observation (EO) data, in-situ data, model data and the tools and processors necessary to fully exploit these vast and heterogeneous datasets. The cloud processing capabilities provided, allow users to perform heavy processing tasks through a user-friendly Graphical User Interface (GUI). A connection to the PEPS (Plateforme pour l'Exploitation des Produits Sentinel) archive will provide data from Sentinel missions 1, 2 and 3. Automatic comparison tools will be provided to exploit the in-situ datasets in synergy with EO data. In addition, users may develop, test and share their own advanced algorithms for the extraction of coastal information. Algorithm validation will be facilitated by the capabilities to compute statistics over long time-series. Finally, C-TEP subscription services will allow users to perform automatic monitoring of some key

Coastal Dunes of the Baltic Sea Shores: A Review

Directory of Open Access Journals (Sweden)

Łabuz Tomasz Arkadiusz

2018-03-01

Full Text Available The article summarises results of studies conducted along the Baltic Sea sandy coasts by scientists involved in coastal dune research, and presents an attempt to describe the types and distribution of dune coasts. The Baltic Sea coasts feature lower and higher foredunes. The lowland behind the coastal dune belt is covered by wandering or stabilised inland dunes – transgressive forms, mainly parabolic or barchans. The source of sediment for dune development includes fluvioglacial sands from eroded coasts, river-discharged sand, and older eroded dunes. Due to the ongoing erosion and coastal retreat, many dunes have been eroded, and some are withdrawing onto the adjacent land. There are visible differences between the south-eastern, western, and northern parts of the Baltic Sea coast with respect to dune development. The entire southern and eastern coast abounds in sand, so the coastal dunes are large, formerly or currently wandering formations. The only shifting dunes are found at the Polish and the Russian–Lithuanian coasts on the Łebsko Lake Sandbar as well as on the Vistula and Curonian Spits. The very diverse shoreline of the south-western coast experiences a scarcity of larger sandy formations. Substantial parts of the Baltic Sea sandy coasts have been eroded or transformed by humans. The northern part of the Baltic Sea coast features mainly narrow and low sandy coasts (e.g. in Estonia. Further north, sandy dunes are virtually absent.

Polish Semantic Parser

Directory of Open Access Journals (Sweden)

Agnieszka Grudzinska

2000-01-01

Full Text Available Amount of information transferred by computers grows very rapidly thus outgrowing the average man's capability of reception. It implies computer programs increase in the demand for which would be able to perform an introductory classitication or even selection of information directed to a particular receiver. Due to the complexity of the problem, we restricted it to understanding short newspaper notes. Among many conceptions formulated so far, the conceptual dependency worked out by Roger Schank has been chosen. It is a formal language of description of the semantics of pronouncement integrated with a text understanding algorithm. Substantial part of each text transformation system is a semantic parser of the Polish language. It is a module, which as the first and the only one has an access to the text in the Polish language. lt plays the role of an element, which finds relations between words of the Polish language and the formal registration. It translates sentences written in the language used by people into the language theory. The presented structure of knowledge units and the shape of understanding process algorithms are universal by virtue of the theory. On the other hand the defined knowledge units and the rules used in the algorithms ure only examples because they are constructed in order to understand short newspaper notes.

Microbiological flora and nail polish: a brief report.

Science.gov (United States)

Rayan, G M; Flournoy, D J; Schlageter, P

1994-11-01

Removing nail polish and prosthetic nails from operating room (OR) personnel prior to scrubbing and from patients prior to hand surgery is recommended but not practiced in many hospitals. There is concern that nail polish can act as a vehicle for the transfer of infectious agents. This study was designed to determine the incidence of microbiological flora of nail polish in a clinical setting.

Smoking characteristics of Polish immigrants in Dublin.

LENUS (Irish Health Repository)

Kabir, Zubair

2008-01-01

BACKGROUND: This study examined two main hypotheses: a) Polish immigrants\\' smoking estimates are greater than their Irish counterparts (b) Polish immigrants purchasing cigarettes from Poland smoke "heavier" (>\\/= 20 cigarettes a day) when compared to those purchasing cigarettes from Ireland. The study also set out to identify significant predictors of \\'current\\' smoking (some days and everyday) among the Polish immigrants. METHODS: Dublin residents of Polish origin (n = 1,545) completed a previously validated Polish questionnaire in response to an advertisement in a local Polish lifestyle magazine over 5 weekends (July-August, 2007). The Office of Tobacco Control telephone-based monthly survey data were analyzed for the Irish population in Dublin for the same period (n = 484). RESULTS: Age-sex adjusted smoking estimates were: 47.6% (95% Confidence Interval [CI]: 47.3%; 48.0%) among the Poles and 27.8% (95% CI: 27.2%; 28.4%) among the general Irish population (p < 0.001). Of the 57% of smokers (n = 345\\/606) who purchased cigarettes solely from Poland and the 33% (n = 198\\/606) who purchased only from Ireland, 42.6% (n = 147\\/345) and 41.4% (n = 82\\/198) were "heavy" smokers, respectively (p = 0.79). Employment (Odds Ratio [OR]: 2.89; 95% CI: 1.25-6.69), lower education (OR: 3.76; 95%CI: 2.46-5.74), and a longer stay in Ireland (>24 months) were significant predictors of current smoking among the Poles. An objective validation of the self-reported smoking history of a randomly selected sub-sample immigrant group, using expired carbon monoxide (CO) measurements, showed a highly significant correlation coefficient (r = 0.64) of expired CO levels with the reported number of cigarettes consumed (p < 0.0001). CONCLUSION: Polish immigrants\\' smoking estimates are higher than their Irish counterparts, and particularly if employed, with only primary-level education, and are overseas >2 years.

Summary of other human activities in the coastal and marine environment

CSIR Research Space (South Africa)

Celliers, Louis

2015-01-01

Full Text Available The Western Indian Ocean (WIO) offers a wealth of opportunity for the profitable and beneficial use of coastal and marine resources – a prospect for a true ocean economy. These benefits are derived from a range of human activities in the coastal...

Reel-to-reel substrate tape polishing system

Energy Technology Data Exchange (ETDEWEB)

Selvamanickam, Venkat; Gardner, Michael T.; Judd, Raymond D.; Weloth, Martin; Qiao, Yunfei

2005-06-21

Disclosed is a reel-to-reel single-pass mechanical polishing system (100) suitable for polishing long lengths of metal substrate tape (124) used in the manufacture of high-temperature superconductor (HTS) coated tape, including multiple instantiations of a polishing station (114) in combination with a subsequent rinsing station (116) arranged along the axis of the metal substrate tape (124) that is translating between a payout spool (110a) and a take-up spool (110b). The metal substrate tape obtains a surface smoothness that is suitable for the subsequent deposition of a buffer layer.

Coastal Risk Management in a Changing Climate

DEFF Research Database (Denmark)

Burcharth, Hans F.; Zanuttigh, Barbara; Andersen, Thomas Lykke

2014-01-01

Existing coastal management and defense approaches are not well suited to meet the challenges of climate change and related uncertanities. Professionals in this field need a more dynamic, systematic and multidisciplinary approach. Written by an international group of experts, Coastal Risk...... Management in a Changing Climate provides innovative, multidisciplinary best practices for mitigating the effects of climate change on coastal structures. Based on the Theseus program, the book includes eight study sites across Europe, with specific attention to the most vulnerable coastal environments...

Personal care products and steroid hormones in the Antarctic coastal environment associated with two Antarctic research stations, McMurdo Station and Scott Base.

Science.gov (United States)

Emnet, Philipp; Gaw, Sally; Northcott, Grant; Storey, Bryan; Graham, Lisa

2015-01-01

Pharmaceutical and personal care products (PPCPs) are a major source of micropollutants to the aquatic environment. Despite intense research on the fate and effects of PPCPs in temperate climates, there is a paucity of data on their presence in polar environments. This study reports the presence of selected PPCPs in sewage effluents from two Antarctic research stations, the adjacent coastal seawater, sea ice, and biota. Sewage effluents contained bisphenol-A, ethinylestradiol, estrone, methyl triclosan, octylphenol, triclosan, and three UV-filters. The maximum sewage effluent concentrations of 4-methyl-benzylidene camphor, benzophenone-1, estrone, ethinylestradiol, and octylphenol exceeded concentrations previously reported. Coastal seawaters contained bisphenol-A, octylphenol, triclosan, three paraben preservatives, and four UV-filters. The sea ice contained a similar range and concentration of PPCPs as the seawater. Benzophenone-3 (preferential accumulation in clams), estradiol, ethinylestradiol, methyl paraben (preferential accumulation in fish, with concentrations correlating negatively with fillet size), octylphenol, and propyl paraben were detected in biota samples. PPCPs were detected in seawater and biota at distances up to 25 km from the research stations WWTP discharges. Sewage effluent discharges and disposal of raw human waste through sea ice cracks have been identified as sources of PPCPs to Antarctic coastal environments. Copyright © 2014 Elsevier Inc. All rights reserved.

Polish Qualitative Sociology: The General Features and Development

OpenAIRE

Konecki, Krzysztof Tomasz; Kacperczyk, Anna; Marciniak, Łukasz

2005-01-01

Forum Qualitative Sozialforschung / Forum: Qualitative Social Research,2005, 6(3) The article explores the development of Polish qualitative sociology in Poland by presenting its main intellectual routes and some of the general features of Polish sociology. Romanticism and inductionmethod are crucial elements for the development of this discipline in Poland and contribute to its. unigueness. The role of Florian Znaniecki in creating the Polish qualitative sociology is also underlined.

21 CFR 872.6030 - Oral cavity abrasive polishing agent.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Oral cavity abrasive polishing agent. 872.6030... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6030 Oral cavity abrasive polishing agent. (a) Identification. An oral cavity abrasive polishing agent is a device in paste or powder form...

Survey of organotin compounds in rivers and coastal environments in Portugal 1999-2000

Energy Technology Data Exchange (ETDEWEB)

Diez, Sergi [Department of Environmental Chemistry, IIQAB-CSIC, Jordi Girona 18-26, 08034 Barcelona (Spain)]. E-mail: sdsqam@cid.csic.es; Lacorte, Silvia [Department of Environmental Chemistry, IIQAB-CSIC, Jordi Girona 18-26, 08034 Barcelona (Spain); Viana, Paula [Direcao Geral do Ambiente, Ministerio do Ambiente, Rua da Murgueira, Zambujal, 2720 Amadora (Portugal); Barcelo, Damia [Department of Environmental Chemistry, IIQAB-CSIC, Jordi Girona 18-26, 08034 Barcelona (Spain); Bayona, Josep M. [Department of Environmental Chemistry, IIQAB-CSIC, Jordi Girona 18-26, 08034 Barcelona (Spain)

2005-08-15

In the period from April 1999 to May 2000, organotin pollution, namely butyl and phenyltins, was investigated in coastal and continental waters (46 stations), estuarine sediments (15 stations) and mussels (Mytilus galloprovincialis) (13 stations) throughout Portugal. Sampling points were chosen in areas of specific industrial, agricultural and harbor activities. Butyltins (BTs) were the only tin species identified of which tributyltin (TBT) was found in the whole area. Concentrations of TBT in river water ranged from 3 to 30 ng L{sup -1} (as Sn), marine sediment ranged from 4 to 12 {mu}g kg{sup -1} (as Sn), whereas concentrations in mussel tissue ranged from 2.5 to 490 {mu}g kg{sup -1} (as Sn). Given that some water samples appeared to be contaminated by higher monobutyltin (MBT) and dibutyltin (DBT) concentrations, the role of biological degradation and direct inputs from agricultural and industrial applications areas are discussed. The study compares depleted butyltin pollution in sediments and mussels of the Portuguese coastline associated with antifouling paints with previously reported levels. Inputs in river waters are more related to (i) PVC leaching and (ii) industrial sources, in some cases discharged by municipal wastewaters. - Survey data illustrate the complexities of organotin sources and cycling in coastal environments.

Survey of organotin compounds in rivers and coastal environments in Portugal 1999-2000

International Nuclear Information System (INIS)

Diez, Sergi; Lacorte, Silvia; Viana, Paula; Barcelo, Damia; Bayona, Josep M.

2005-01-01

In the period from April 1999 to May 2000, organotin pollution, namely butyl and phenyltins, was investigated in coastal and continental waters (46 stations), estuarine sediments (15 stations) and mussels (Mytilus galloprovincialis) (13 stations) throughout Portugal. Sampling points were chosen in areas of specific industrial, agricultural and harbor activities. Butyltins (BTs) were the only tin species identified of which tributyltin (TBT) was found in the whole area. Concentrations of TBT in river water ranged from 3 to 30 ng L -1 (as Sn), marine sediment ranged from 4 to 12 μg kg -1 (as Sn), whereas concentrations in mussel tissue ranged from 2.5 to 490 μg kg -1 (as Sn). Given that some water samples appeared to be contaminated by higher monobutyltin (MBT) and dibutyltin (DBT) concentrations, the role of biological degradation and direct inputs from agricultural and industrial applications areas are discussed. The study compares depleted butyltin pollution in sediments and mussels of the Portuguese coastline associated with antifouling paints with previously reported levels. Inputs in river waters are more related to (i) PVC leaching and (ii) industrial sources, in some cases discharged by municipal wastewaters. - Survey data illustrate the complexities of organotin sources and cycling in coastal environments

Geomorphometry in coastal morphodynamics

Science.gov (United States)

Guisado-Pintado, Emilia; Jackson, Derek

2017-04-01

Geomorphometry is a cross-cutting discipline that has interwoven itself into multiple research themes due to its ability to encompass topographic quantification on many fronts. Its operational focus is largely defined as the extraction of land-surface parameters and earth surface characterisation. In particular, the coastal sciences have been enriched by the use of digital terrain production techniques both on land and in the nearshore/marine area. Numerous examples exist in which the utilisation of field instrumentation (e.g. LIDAR, GPS, Terrestrial Laser Scanning, multi-beam echo-sounders) are used for surface sampling and development of Digital Terrain Models, monitoring topographic change and creation of nearshore bathymetry, and have become central elements in modern investigations of coastal morphodynamics. The coastal zone is a highly dynamic system that embraces variable and at times, inter-related environments (sand dunes, sandy beaches, shoreline and nearshore) all of which require accurate and integrated monitoring. Although coastal studies can be widely diverse (with interconnected links to other related disciplines such as geology or biology), the characterisation of the landforms (coastal geomorphology) and associated processes (morphodynamics, hydrodynamics, aeolian processes) is perhaps where geomorphometry (topo-bathymetry quantification) is best highlighted. In this respect, many tools have been developed (or improved upon) for the acquisition of topographic data that now commands a high degree of accuracy, simplicity, and ultimately acquisition cost reduction. We present a series of field data acquisitions examples that have produced land surface characterisation using a range of techniques including traditional GPS surveys to more recent Terrestrial Laser Scanning and airborne LIDAR. These have been conducted within beach and dune environments and have helped describe erosion and depositional processes driven by wind and wave energy (high

19th Polish Control Conference

CERN Document Server

Kacprzyk, Janusz; Oprzędkiewicz, Krzysztof; Skruch, Paweł

2017-01-01

This volume contains the proceedings of the KKA 2017 – the 19th Polish Control Conference, organized by the Department of Automatics and Biomedical Engineering, AGH University of Science and Technology in Kraków, Poland on June 18–21, 2017, under the auspices of the Committee on Automatic Control and Robotics of the Polish Academy of Sciences, and the Commission for Engineering Sciences of the Polish Academy of Arts and Sciences. Part 1 deals with general issues of modeling and control, notably flow modeling and control, sliding mode, predictive, dual, etc. control. In turn, Part 2 focuses on optimization, estimation and prediction for control. Part 3 is concerned with autonomous vehicles, while Part 4 addresses applications. Part 5 discusses computer methods in control, and Part 6 examines fractional order calculus in the modeling and control of dynamic systems. Part 7 focuses on modern robotics. Part 8 deals with modeling and identification, while Part 9 deals with problems related to security, fault ...

Meteorological influences on coastal new particle formation

NARCIS (Netherlands)

Leeuw, G. de; Kunz, G.J.; Buzorius, G.; O`Dowd, C.D.

2002-01-01

The meteorological situation at the midlatitude coastal station of Mace Head, Ireland, is described based on observations during the New Particle Formation and Fate in the Coastal Environment (PARFORCE) experiments in September 1998 and June 1999. Micrometeorological sensors were mounted near the

An Unbiased View of the History of Polish Medical Physics by a Senior Polish Medical Physicist

International Nuclear Information System (INIS)

Chomicki, O. A.

2008-01-01

Here is a story told by Maria Sklodowska-Curie at the meeting of the International Committee of Intellectual Cooperation in 1921: 'In a free literary competition on the role and importance of elephants the Englishman's story was 'My adventures while shooting elephants in South Africa', the Frenchman was more concerned with 'The sexual and erotic life of elephants', while the Polish approach was invariably 'The elephant versus Poland's national independence', which seemed quite understandable in the light of over 120 years when Poland was partitioned and lost its independence. Since then this saying has become proverbial and came to express the unmistakably Polish tendency to see everything in terms of Polish interests. In my remarks and reminiscences on the history of the Polish Society of Medical Physics you will quickly recognize the same tendency. First, I will, among other things, try to open some old cupboards to 'produce good [things] from the store of good' (Matthew 12:35), especially concerning the first few years of the activity in medical physics in Poland, and second, I will draw some conclusions and/or offer suggestions based on what a senior medical physicist has seen for more than 50 years of his activity in this field. (author)

Cannabinoids cases in polish athletes

OpenAIRE

A Pokrywka; Z Obmiński; D Kwiatkowska; R Grucza

2009-01-01

The aim of this study was to investigate the number of cases and the profiles of Polish athletes who had occasionally been using marijuana or hashish throughout the period of 1998-2004, with respect to: sex, age, and discipline of sport as well as the period of testing (in- and out-of-competition). Results of the study were compared with some data reported by other WADA accredited anti-doping laboratories. Totally, 13 631 urine samples taken from Polish athletes of both sexes, aged 10-67 year...

Particle Tracking Model (PTM) with Coastal Modeling System (CMS)

Science.gov (United States)

2015-11-04

Coastal Inlets Research Program Particle Tracking Model (PTM) with Coastal Modeling System ( CMS ) The Particle Tracking Model (PTM) is a Lagrangian...currents and waves. The Coastal Inlets Research Program (CIRP) supports the PTM with the Coastal Modeling System ( CMS ), which provides coupled wave...and current forcing for PTM simulations. CMS -PTM is implemented in the Surface-water Modeling System, a GUI environment for input development

The social shaping of innovation in polish companies

DEFF Research Database (Denmark)

Lorentzen, Anne

2003-01-01

The paper deals with strategies of innovation in Polish manufacturing companies. The point of departure is a theoretical framework of enterprise level innovation, and of the factors forming strategies of innovation on enterprise level. The paper analyses evidence from 23 Polish companies and pres......The paper deals with strategies of innovation in Polish manufacturing companies. The point of departure is a theoretical framework of enterprise level innovation, and of the factors forming strategies of innovation on enterprise level. The paper analyses evidence from 23 Polish companies...... and presents two cases more in detail. The analysis shows that the Polish companies have all been quite innovative, mostly in relation to product innovation. They choose innovation strategies, which are incremental more than radical, and they tend to differentiate their product range rather than to specialise....... They consider quality development a must in the fight for market shares and they adapt equipment and organisation to this goal. The factors forming and determining the strategies of the companies count the technological knowledge and expertise of the owner/founder, the structural changes of the market...

Semi-strong informational efficiency in the Polish foreign exchange market

OpenAIRE

Luksz Goczek

2015-01-01

During the financial crisis a notion that the Polish exchange rate is not determined effectively was very dominant, because of a contagion effect of the global financial crisis on the Polish economy. In addition, many foreign exchange market analysts explained developments in the Polish exchange market trough a hypothesis that the Polish zloty exchange rate follows other exchange rates. This contradicts market efficiency as this would lead to profitable arbitrage possibility based on past inf...

Symmetry or asymmetry? Cross-border openness of service providers in Polish-Czech and Polish-German border towns

Directory of Open Access Journals (Sweden)

Dołzbłasz Sylwia

2015-03-01

Full Text Available The symmetry and/or asymmetry in terms of cross-border openness of service providers is examined in this article, for the cases of two border twin towns: Cieszyn/Český Těšín at the Polish-Czech border, and Gubin/Guben at the Polish-German border. To assess the level of openness of firms towards clients from the other side of the border, four trans-border categories were examined: neighbour’s language visible at store location; business offers in the language of the neighbour; the possibilities of payment in the neighbour’s currency; and the staff’s knowledge of the language. This enabled a comparison of both parts of the particular twin towns in relation to the character of cross-border openness, as well as an assessment of their symmetry/asymmetry. Comparisons of Gubin/Guben and Cieszyn/Český Těšín with respect to the analysed features were also carried out. The analysis shows significant variation in the level of cross-border openness towards clients from neighbouring countries. Whereas in the Polish-Czech town a relative symmetry was observed, in the Polish-German case, significant asymmetry was noted.

Transformation of the Polish Banking Sector

Directory of Open Access Journals (Sweden)

Marek Stefański

2009-07-01

Full Text Available In the post-war period the banking system in Poland underwent two important system transitions: after 1946 and after 1989. The third transformation began after May 1, 2004, but it did not have a systemic character. The Polish banking sector started to operate on the Single European Market. The first part of the paper is devoted to the problems of the banks transformations after 1989 with a special focus on the quantitative development of banks in 19892008, and on subsequent privatisation and consolidation processes. The former intensified in 19891999, and the latter in 19992002. The consolidation process was very noticeable in the sector of cooperative banks after 1994. The second part of the paper includes an economic and financial analysis of the banks. A lot of attention was paid to the liquidity of the banking sector. It was assessed as good, which was confirmed by a short-term rating of Moodys and by the Financial Stability Report 2009, published by the National Bank of Poland in June 2009. The comparison of the net profit of the banking sector in 19972008 shows its dependence on the economic situation and policy. The number of banks with capital adequacy ratio well above the minimum required by the banking supervision is rising. The financial power ratings are not favorable for the domestic banks. The third part of the paper focuses on the development directions of the Polish banking sector. It may be concluded on the basis of the analysis that privatisation and consolidation processes will be continued. They will concentrate on the capital of foreign banks already operating in Poland. As compared with individual foreign banks, the potential of the Polish banking sector is week. The fourth part of the paper focuses on the presentation Polish banking sector in the context of European Union banking sector. The paper finishes with conclusions. Generally, Polish banks have to implement a strategy to enable them to compete on the Single

Effect of Polishing Systems on Surface Roughness and Topography of Monolithic Zirconia.

Science.gov (United States)

Goo, C L; Yap, Auj; Tan, Kbc; Fawzy, A S

2016-01-01

This study evaluated the effect of different chairside polishing systems on the surface roughness and topography of monolithic zirconia. Thirty-five monolithic zirconia specimens (Lava PLUS, 3M ESPE) were fabricated and divided into five groups of seven and polished with the following: Group 1 (WZ)-Dura white stone followed by Shofu zirconia polishing kit; Group 2 (SZ)-Shofu zirconia polishing kit; Group 3 (CE)-Ceramiste porcelain polishers; Group 4 (CM)-Ceramaster porcelain polishers; and Group 5 (KZ)-Komet ZR zirconia polishers. All specimens were ground with a fine-grit diamond bur prior to polishing procedures to simulate clinical finishing. Baseline and post-polishing profilometric readings were recorded and delta Ra values (difference in mean surface roughness before and after polishing) were computed and analyzed using one-way analysis of variance and Scheffe post hoc test (pSEM) images of the ground but unpolished and polished specimens were acquired. Delta Ra values ranged from 0.146 for CE to 0.400 for KZ. Delta Ra values for KZ, WZ, and SZ were significantly greater than for CE. Significant differences in delta Ra values were also observed between KZ and CM. The SEM images obtained were consistent with the profilometric findings. Diamond-impregnated polishing systems were more effective than silica carbide-impregnated ones in reducing the surface roughness of ground monolithic zirconia.

Simulation and analysis of an alternative kinematics for improving the polishing uniformity over the surface of polished tiles

Directory of Open Access Journals (Sweden)

Weingaertner, W. L.

2010-10-01

Full Text Available The present work investigates the possibility of adopting a new kinematics at the industrial polishing lines of porcelain stoneware tile. An alternative motion of the transverse oscillation of the polishing heads is proposed, in which no radical changes in the industries facilities are required. The basic idea is to replace the purely sinus motion of the polishing heads by a rather trapezoid wavelike motion. In theory this could be achieved simply by adopting regular delays at the transverse oscillation motion. Consequences of this alternative kinematics were quantitatively analyzed considering the spatial homogeneity of polishing expected for tiles. Such homogeneity was represented by the coefficient of variation of the distribution of polishing time over the surface, which was in turn determined by means of computational simulations, taking into account the effect of multiple polishing heads.

El presente trabajo investiga la posibilidad de adoptar una nueva cinemática en las líneas de pulido industrial de baldosas de gres porcelánico. Se propone una propuesta alternativa de la oscilación transversal de los cabezales pulidores, en el que no hay cambios radicales en las instalaciones de las industrias son necesarias. La idea básica consiste en sustituir el movimiento totalmente del seno de los cabezales pulidores por un movimiento ondulatorio trapezoide. En teoría, esto podría lograrse sólo mediante la adopción de los habituales retrasos en el movimiento de oscilación transversal. las consecuencias de esta cinemática fueron analizados cuantitativamente, teniendo en cuenta la homogeneidad espacial de pulido. Tal homogeneidad fora representada por el coeficiente de variación de la distribución de lo tiempo de pulido en la superficie, determinada por medio de simulaciones computacionales, teniendo también en cuenta el efecto de pulido de las cabezas múltiples.

Methylamine as a nitrogen source for microorganisms from a coastal marine environment.

Science.gov (United States)

Taubert, Martin; Grob, Carolina; Howat, Alexandra M; Burns, Oliver J; Pratscher, Jennifer; Jehmlich, Nico; von Bergen, Martin; Richnow, Hans H; Chen, Yin; Murrell, J Colin

2017-06-01

Nitrogen is a key limiting resource for biomass production in the marine environment. Methylated amines, released from the degradation of osmolytes, could provide a nitrogen source for marine microbes. Thus far, studies in aquatic habitats on the utilization of methylamine, the simplest methylated amine, have mainly focussed on the fate of the carbon from this compound. Various groups of methylotrophs, microorganisms that can grow on one-carbon compounds, use methylamine as a carbon source. Non-methylotrophic microorganisms may also utilize methylamine as a nitrogen source, but little is known about their diversity, especially in the marine environment. In this proof-of-concept study, stable isotope probing (SIP) was used to identify microorganisms from a coastal environment that assimilate nitrogen from methylamine. SIP experiments using 15 N methylamine combined with metagenomics and metaproteomics facilitated identification of active methylamine-utilizing Alpha- and Gammaproteobacteria. The draft genomes of two methylamine utilizers were obtained and their metabolism with respect to methylamine was examined. Both bacteria identified in these SIP experiments used the γ-glutamyl-methylamide pathway, found in both methylotrophs and non-methylotrophs, to metabolize methylamine. The utilization of 15 N methylamine also led to the release of 15 N ammonium that was used as nitrogen source by other microorganisms not directly using methylamine. © 2017 Society for Applied Microbiology and John Wiley & Sons Ltd.

Cannabinoids cases in polish athletes

Directory of Open Access Journals (Sweden)

A Pokrywka

2009-07-01

Full Text Available The aim of this study was to investigate the number of cases and the profiles of Polish athletes who had occasionally been using marijuana or hashish throughout the period of 1998-2004, with respect to: sex, age, and discipline of sport as well as the period of testing (in- and out-of-competition. Results of the study were compared with some data reported by other WADA accredited anti-doping laboratories. Totally, 13 631 urine samples taken from Polish athletes of both sexes, aged 10-67 years, performing 46 disciplines of sport were tested. Cannabinoids were detected in 267 samples. Among Polish athletes the relative number of positive THC (tetrahydrocannabinol samples was one of the highest in Europe. The group of young Polish athletes (aged 16-24 years was the most THC-positive. THC-positive cases were noted more frequently in male athletes tested during out of competitions. The so-called contact sports (rugby, ice hockey, skating, boxing, badminton, body building and acrobatic sports were those sports, where the higher risk of cannabis use was observed. The legal interpretation of some positive cannabinoids results would be difficult because of some accidental and unintentional use of the narcotics by sportsmen. It was concluded that national anti-doping organizations (NADO’s, which are competent to judge whether the anti-doping rules were violated, should take into account the possibility of non-intentional doping use of cannabinoids via passive smoking of marijuana.

Polish migrant youth in Scottish schools : conflicted identity and family capital.

OpenAIRE

Moskal, M.

2013-01-01

The perspectives of migrant children and young people have been largely omitted in youth studies. Existing literature focuses predominantly on young people born to migrant parents in the host country, while the problems of first generation of migrant youth have received limited attention. This paper focuses on first-generation Polish migrants and their experiences in relation to school transition, new language learning and the changing family relationships in the new social environment. It dr...

Composite adaptive control of belt polishing force for aero-engine blade

Science.gov (United States)

Zhsao, Pengbing; Shi, Yaoyao

2013-09-01

The existing methods for blade polishing mainly focus on robot polishing and manual grinding. Due to the difficulty in high-precision control of the polishing force, the blade surface precision is very low in robot polishing, in particular, quality of the inlet and exhaust edges can not satisfy the processing requirements. Manual grinding has low efficiency, high labor intensity and unstable processing quality, moreover, the polished surface is vulnerable to burn, and the surface precision and integrity are difficult to ensure. In order to further improve the profile accuracy and surface quality, a pneumatic flexible polishing force-exerting mechanism is designed and a dual-mode switching composite adaptive control(DSCAC) strategy is proposed, which combines Bang-Bang control and model reference adaptive control based on fuzzy neural network(MRACFNN) together. By the mode decision-making mechanism, Bang-Bang control is used to track the control command signal quickly when the actual polishing force is far away from the target value, and MRACFNN is utilized in smaller error ranges to improve the system robustness and control precision. Based on the mathematical model of the force-exerting mechanism, simulation analysis is implemented on DSCAC. Simulation results show that the output polishing force can better track the given signal. Finally, the blade polishing experiments are carried out on the designed polishing equipment. Experimental results show that DSCAC can effectively mitigate the influence of gas compressibility, valve dead-time effect, valve nonlinear flow, cylinder friction, measurement noise and other interference on the control precision of polishing force, which has high control precision, strong robustness, strong anti-interference ability and other advantages compared with MRACFNN. The proposed research achieves high-precision control of the polishing force, effectively improves the blade machining precision and surface consistency, and

Pwani Yetu: Issue 4. April 1999.Tanzania Coastal Management Partnership.

OpenAIRE

Tanzania Coastal Management Partnership

1999-01-01

The Newsletter of the Tanzania Coastal Management Partnership - Pwani Yetu - 'our coast', is produced every other month in both Kiswahili and English and circulated to all coastal management partners from national level, coastal communities and the private sector. Pwani Yetu reports on coastal and marine activities, including issues on conservation, environment, and social economic development. 'Research Group' TCMP.

Monitoring of Robot Assisted Polishing through parameters of acoustic emission

DEFF Research Database (Denmark)

Lazarev, Ruslan; Top, Søren; Bilberg, Arne

The polishing process is essential for the surface generation of machine tooling components in advanced manufacturing. While robot assisted polishing is faster and more consistent than manual polishing, it can still consume a significant part of ma- chining time and operator presence time...

Coastal Climate Change Education, Mitigation, and Adaptation in the Natural and Built Environments: Progress of the Coastal Areas Climate Change Education Partnership

Science.gov (United States)

Feldman, A.; Herman, B.; Vernaza-Hernández, V.; Ryan, J. G.; Muller-Karger, F. E.; Gilbes, F.

2011-12-01

The Coastal Area Climate Change Education (CACCE) Partnership, funded by the National Science Foundation, seeks to develop new ways to educate citizens about global climate change. The core themes are sea level rise and impacts of climate change in the southeastern United States and the Caribbean Sea. CACCE focuses on helping partners, educators, students, and the general public gain a fundamental and working understanding of the interrelation among the natural environment, built environment, and social aspects in the context of climate change in coastal regions. To this end, CACCE's objectives reported here include: 1) defining the current state of awareness, perceptions, and literacy about the impacts of climate change; and 2) testing a model of transdisciplinary research and learning as a means of training a new generation of climate professionals. Objective one is met in part by CACCE survey efforts that reveal Florida and Puerto Rico secondary science teachers hold many non-scientific views about climate change and climate change science and provide inadequate instruction about climate change. Associated with objective two are five Multiple Outcome Interdisciplinary Research and Learning (MOIRL) pilot projects underway in schools in Florida and Puerto Rico. In the CACCE Partnership the stakeholders include: students (K-16 and graduate); teachers and education researchers; informal science educators; scientists and engineers; business and industry; policy makers; and community members. CACCE combines interdisciplinary research with action research and community-based participatory research in a way that is best described as "transdisciplinary". Learning occurs in all spheres of interactions among stakeholders as they engage in scientific, educational, community and business activities through their legitimate peripheral participation in research communities of practice. We will describe the process of seeking and building partnerships, and call for a dialogue

Trace element analysis of nail polishes

International Nuclear Information System (INIS)

Misra, G.; Mittal, V.K.; Sahota, H.S.

1999-01-01

Instrumental neutron activation analysis (INAA) technique was used to measure the concentrations of various trace elements in nail polishes of popular Indian and foreign brands. The aim of the present experiment was to see whether trace elements could distinguish nail polishes of different Indian and foreign brands from forensic point of view. It was found that cesium can act as a marker to differentiate foreign and Indian brands. (author)

Factors influencing the surface quality of polished tool steels

International Nuclear Information System (INIS)

Rebeggiani, S; Rosén, B-G

2014-01-01

Today’s demands on surface quality of moulds for injection moulding of plastic components involve no/low defect contents and roughness levels in the nm-range for high gloss applications. Material properties as well as operating conditions influence the mould finish, and thus the final surface of moulded products. This paper focuses on how particle content and different polishing strategies influence final surface qualities of moulds. Visual estimations of polished tool steel samples were combined with non-contact 3D-surface texture analysis in order to correlate traditional assessments to more quantitative methods, and to be able to analyse the surfaces at nanometre-level. It was found that steels with a lower proportion of particles, like carbides and oxides, gave rise to smoother polished surfaces. In a comparative study of polishers from different polishing shops, it was found that while different surface preparation strategies can lead to similar final roughness, similar preparation techniques can produce high-quality surfaces from different steel grades. However, the non-contact 3D-surface texture analysis showed that not all smooth polished surfaces have desirable functional topographies for injection moulding of glossy plastic components. (paper)

New perspectives in hydrodynamic radial polishing techniques for optical surfaces

Science.gov (United States)

Ruiz, Elfego; Sohn, Erika; Luna, Esteban; Salas, Luis; Cordero, Alberto; González, Jorge; Núñez, Manuel; Salinas, Javier; Cruz-González, Irene; Valdés, Jorge; Cabrera, Victor; Martínez, Benjamín

2004-09-01

In order to overcome classic polishing techniques, a novel hydrodynamic radial polishing tool (HyDRa) is presented; it is useful for the corrective lapping and fine polishing of diverse materials by means of a low-cost abrasive flux and a hydrostatic suspension system that avoids contact of the tool with the working surface. This tool enables the work on flat or curved surfaces of currently up to two and a half meters in diameter. It has the advantage of avoiding fallen edges during the polishing process as well as reducing tool wear out and deformation. The functioning principle is based on the generation of a high-velocity, high-pressure, abrasive emulsion flux with radial geometry. The polishing process is repeatable by means of the control of the tool operational parameters, achieving high degrees of precision and accuracy on optical and semiconductor surfaces, with removal rates of up to 9 mm3/hour and promising excellent surface polishing qualities. An additional advantage of this new tool is the possibility to perform interferometric measurements during the polishing process without the need of dismounting the working surface. A series of advantages of this method, numerical simulations and experimental results are described.

Coastal zone

International Nuclear Information System (INIS)

2002-01-01

The report entitled Climate Change Impacts and Adaptation : A Canadian Perspective, presents a summary of research regarding the impacts of climate change on key sectors over the past five years as it relates to Canada. This chapter on the coastal zone focuses on the impact of climate change on Canada's marine and Great Lakes coasts with tips on how to deal with the impacts associated with climate change in sensitive environments. This report is aimed at the sectors that will be most affected by adaptation decisions in the coastal zone, including fisheries, tourism, transportation and water resources. The impact of climate change in the coastal zone may include changes in water levels, wave patterns, storm surges, and thickness of seasonal ice cover. The Intergovernmental Panel on Climate Change projects global average sea level will rise between 9 and 88 centimetres between 1990 to 2100, but not all areas of Canada will experience the same rate of future sea level change. The main physical impact would be shoreline change that could result in a range of biophysical and socio-economic impacts, some beneficial, some negative. The report focuses on issues related to infrastructure and communities in coastal regions. It is noted that appropriate human adaptation will play a vital role in reducing the extent of potential impacts by decreasing the vulnerability of average zone to climate change. The 3 main trends in coastal adaptation include: (1) increase in soft protection, retreat and accommodation, (2) reliance on technology such as geographic information systems to manage information, and (3) awareness of the need for coastal adaptation that is appropriate for local conditions. 61 refs., 7 figs

Narrowing the gap between theory and practice? Interactive knowledge development in a coastal defense project

NARCIS (Netherlands)

Seijger, Chris; van Tatenhove, J.; Dewulf, Geert P.M.R.; Otter, Henriëtte; Javernick-Will, A.; Chinowsky, P.

2012-01-01

Coastal defence projects intend to develop solutions in a highly dynamic environment. The coastal zone is characterized by expanding cities, rising flood risks, economic activity, and a threatened natural environment. Developing relevant knowledge for solutions in coastal defence projects is

Damage-free polishing of monocrystalline silicon wafers without chemical additives

International Nuclear Information System (INIS)

Biddut, A.Q.; Zhang, L.C.; Ali, Y.M.; Liu, Z.

2008-01-01

This investigation explores the possibility and identifies the mechanism of damage-free polishing of monocrystalline silicon without chemical additives. Using high resolution electron microscopy and contact mechanics, the study concludes that a damage-free polishing process without chemicals is feasible. All forms of damages, such as amorphous Si, dislocations and plane shifting, can be eliminated by avoiding the initiation of the β-tin phase of silicon during polishing. When using 50 nm abrasives, the nominal pressure to achieve damage-free polishing is 20 kPa

Prevalence and socioeconomic determinants of leisure time physical activity among Polish farmers

Directory of Open Access Journals (Sweden)

Elżbieta Biernat

2018-03-01

Health-promoting changes are necessary among Polish farmers, including an increase in the awareness of health benefits and the necessity of undertaking physically active ways of spending leisure time. It seems to be a legitimate action to develop a mini-tourist trail in the rural environment as a means of promoting physical activity also among women aged over 40, and from lower income groups, who are especially threatened by inactivity.

The Development of Coastal and Marine

Directory of Open Access Journals (Sweden)

Suharto Widjojo

2004-01-01

Full Text Available Planning and development process of oastaland marine resources tends centralized and adopted top down policy, without any active participations from coastal and marine communities. In order to reach integrated and sustainable development in coastaland marine areas, people should have both complete and up to date information, so that planning and decision making for all aspect of the environment can be done easily. People should give a high attention of surveis, mappings, as well as science and technology of coastal and marine sectors, in order to change the paradigm of development from inland to coastal and marine. Moreover, people should give high attention of potential resources of coastal and marine areas.

Computer-Controlled Cylindrical Polishing Process for Large X-Ray Mirror Mandrels

Science.gov (United States)

Khan, Gufran S.; Gubarev, Mikhail; Speegle, Chet; Ramsey, Brian

2010-01-01

We are developing high-energy grazing incidence shell optics for hard-x-ray telescopes. The resolution of a mirror shells depends on the quality of cylindrical mandrel from which they are being replicated. Mid-spatial-frequency axial figure error is a dominant contributor in the error budget of the mandrel. This paper presents our efforts to develop a deterministic cylindrical polishing process in order to keep the mid-spatial-frequency axial figure errors to a minimum. Simulation software is developed to model the residual surface figure errors of a mandrel due to the polishing process parameters and the tools used, as well as to compute the optical performance of the optics. The study carried out using the developed software was focused on establishing a relationship between the polishing process parameters and the mid-spatial-frequency error generation. The process parameters modeled are the speeds of the lap and the mandrel, the tool s influence function, the contour path (dwell) of the tools, their shape and the distribution of the tools on the polishing lap. Using the inputs from the mathematical model, a mandrel having conical approximated Wolter-1 geometry, has been polished on a newly developed computer-controlled cylindrical polishing machine. The preliminary results of a series of polishing experiments demonstrate a qualitative agreement with the developed model. We report our first experimental results and discuss plans for further improvements in the polishing process. The ability to simulate the polishing process is critical to optimize the polishing process, improve the mandrel quality and significantly reduce the cost of mandrel production

Abstracts Book of 42. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry

International Nuclear Information System (INIS)

1999-01-01

Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry is the most important chemical forum of Polish chemists organised annually. The state of art of many fundamental and applied investigations have been presented and discussed. The following scientific sessions and microsymposia have been proposed: plenary session, analytical chemistry, inorganic chemistry, organic chemistry, chemistry and environment, chemistry and technology of polymers, chemistry didactics, electrochemistry, young scientists forum, chemical technology, chemical engineering, high energetics materials, computers in research and teaching of chemistry, structure modelling and polymer properties, silicon-organic compounds

High resolution, topobathymetric LiDAR coastal zone characterization in Denmark

DEFF Research Database (Denmark)

Steinbacher, Frank; Baran, Ramona; Andersen, Mikkel S.

2016-01-01

Coastal and tidal environments are valuable ecosystems, which, however, are under pressure in many areas around the world due to globalization and/or climate change. Detailed mapping of these environments is required in order to manage the coastal zone in a sustainable way. However, historically...... locations with different environmental settings. We demonstrate the potential of using airborne topobathymetric LiDAR for seamless mapping of land-water transition zones in challenging coastal environments, e.g. in an environment with high water column turbidity and continuously varying water levels due...... these transition zones between land and water are difficult or even impossible to map and investigate in high spatial resolution due to the challenging environmental conditions. The new generation of airborne topobathymetric light detection and ranging (LiDAR) potentially enables full-coverage and high...

Studies on Polonium-210 and Lead-210 aspects in a near shore coastal environment at Kalpakkam, Tamilnadu, India

International Nuclear Information System (INIS)

Iyengar, M.A.R.

2013-01-01

In the present study, an attempt has been made to summarize the findings from a comprehensive research investigation, related to polonium-210 and lead-210 aspects in a confined near shore coastal marine environment at the site of Kalpakkam nuclear complex. The site hosts some major nuclear installations, the main units being a nuclear power station, fast breeder reactor units, reprocessing facilities and supporting facilities. These investigation have been carried out to evaluate the natural radiation exposures of the resident human population in the neighbourhood of the site complex, and compute the additional potential doses to the community, arising from operation of nuclear facilities. An added significance, surfaced during the study, was the presence of a higher natural radiation background in the study area, due to the occurrence of monazite - a thorium mineral - bearing beach sands in vast stretches of the coastal areas

Strain-free polished channel-cut crystal monochromators: a new approach and results

Science.gov (United States)

Kasman, Elina; Montgomery, Jonathan; Huang, XianRong; Lerch, Jason; Assoufid, Lahsen

2017-08-01

The use of channel-cut crystal monochromators has been traditionally limited to applications that can tolerate the rough surface quality from wet etching without polishing. We have previously presented and discussed the motivation for producing channel cut crystals with strain-free polished surfaces [1]. Afterwards, we have undertaken an effort to design and implement an automated machine for polishing channel-cut crystals. The initial effort led to inefficient results. Since then, we conceptualized, designed, and implemented a new version of the channel-cut polishing machine, now called C-CHiRP (Channel-Cut High Resolution Polisher), also known as CCPM V2.0. The new machine design no longer utilizes Figure-8 motion that mimics manual polishing. Instead, the polishing is achieved by a combination of rotary and linear functions of two coordinated motion systems. Here we present the new design of C-CHiRP, its capabilities and features. Multiple channel-cut crystals polished using the C-CHiRP have been deployed into several beamlines at the Advanced Photon Source (APS). We present the measurements of surface finish, flatness, as well as topography results obtained at 1-BM of APS, as compared with results typically achieved when polishing flat-surface monochromator crystals using conventional polishing processes. Limitations of the current machine design, capabilities and considerations for strain-free polishing of highly complex crystals are also discussed, together with an outlook for future developments and improvements.

Knowledge and power in integrated coastal management. For a political anthropology of the sea combined with the sciences of the marine environment

Science.gov (United States)

Mazé, Camille; Dahou, Tarik; Ragueneau, Olivier; Danto, Anatole; Mariat-Roy, Emilie; Raimonet, Mélanie; Weisbein, Julien

2017-10-01

This article presents an innovative collaborative approach, which aims to reinforce and institutionalize the field of the political anthropology of the sea combined with the natural sciences. It begins by relating the evolution in coastal areas, from integrated coastal zone management to the notion of adaptive co-management. It then sets out what contribution the social sciences of politics may bring to our understanding of the government/governance of the sea in terms of sustainable development, starting with political science and then highlighting the importance of a deep anthropological and socio-historical approach. Finally, it gives us a glimpse of the benefits of combining the human and social sciences with the natural sciences to produce a critical analysis of the categories of thought and action associated with the systemic management of the environment, especially the coastal areas.

The Development of a Finite Volume Method for Modeling Sound in Coastal Ocean Environment

Energy Technology Data Exchange (ETDEWEB)

Long, Wen; Yang, Zhaoqing; Copping, Andrea E.; Jung, Ki Won; Deng, Zhiqun

2015-10-28

: As the rapid growth of marine renewable energy and off-shore wind energy, there have been concerns that the noises generated from construction and operation of the devices may interfere marine animals’ communication. In this research, a underwater sound model is developed to simulate sound prorogation generated by marine-hydrokinetic energy (MHK) devices or offshore wind (OSW) energy platforms. Finite volume and finite difference methods are developed to solve the 3D Helmholtz equation of sound propagation in the coastal environment. For finite volume method, the grid system consists of triangular grids in horizontal plane and sigma-layers in vertical dimension. A 3D sparse matrix solver with complex coefficients is formed for solving the resulting acoustic pressure field. The Complex Shifted Laplacian Preconditioner (CSLP) method is applied to efficiently solve the matrix system iteratively with MPI parallelization using a high performance cluster. The sound model is then coupled with the Finite Volume Community Ocean Model (FVCOM) for simulating sound propagation generated by human activities in a range-dependent setting, such as offshore wind energy platform constructions and tidal stream turbines. As a proof of concept, initial validation of the finite difference solver is presented for two coastal wedge problems. Validation of finite volume method will be reported separately.

Can Reduced-Step Polishers Be as Effective as Multiple-Step Polishers in Enhancing Surface Smoothness?

Science.gov (United States)

Kemaloglu, Hande; Karacolak, Gamze; Turkun, L Sebnem

2017-02-01

The aim of this study was to evaluate the effects of various finishing and polishing systems on the final surface roughness of a resin composite. Hypotheses tested were: (1) reduced-step polishing systems are as effective as multiple-step systems on reducing the surface roughness of a resin composite and (2) the number of application steps in an F/P system has no effect on reducing surface roughness. Ninety discs of a nano-hybrid resin composite were fabricated and divided into nine groups (n = 10). Except the control, all of the specimens were roughened prior to be polished by: Enamel Plus Shiny, Venus Supra, One-gloss, Sof-Lex Wheels, Super-Snap, Enhance/PoGo, Clearfil Twist Dia, and rubber cups. The surface roughness was measured and the surfaces were examined under scanning electron microscope. Results were analyzed with analysis of variance and Holm-Sidak's multiple comparisons test (p One-gloss, Enamel Plus Shiny, and Venus Supra groups. (1) The number of application steps has no effect on the performance of F/P systems. (2) Reduced-step polishers used after a finisher can be preferable to multiple-step systems when used on nanohybrid resin composites. (3) The effect of F/P systems on surface roughness seems to be material-dependent rather than instrument- or system-dependent. Reduced-step systems used after a prepolisher can be an acceptable alternative to multiple-step systems on enhancing the surface smoothness of a nanohybrid composite; however, their effectiveness depends on the materials' properties. (J Esthet Restor Dent 29:31-40, 2017). © 2016 Wiley Periodicals, Inc.

2. All-Polish Seminar: Monitoring of Radioactive Environment Contamination Using ASS-500 and PMS Stations

International Nuclear Information System (INIS)

1998-01-01

During last 10 years the modern system of radiological pollution monitoring has been developed in Poland. At the beginning it was composed of ASS-500 stations. At the end of 1995 five automatic PMS stations have been installed as the result of the collaboration between Polish and Danish governments. Several stations of both types were include later. The system is coordinated by Central Laboratory for Radiological Protection. The report reviews the meeting dedicated to problems and future developments of the system

Surface geometry of three packable and one hybrid composite after polishing.

Science.gov (United States)

Jung, Martin; Bruegger, Hilka; Klimek, Joachim

2003-01-01

This study evaluated the surface quality of four composite materials after polishing with six different polishing techniques. Eighty specimens were made using three packable composites (Definite/Degussa, SureFil/ Dentsply and Solitaire/Heraeus-Kulzer) and one hybrid composite (Herculite XRV/Kerr). Five specimens of each material were polished using flexible Sof-Lex discs. The remaining 75 specimens of each composite were prepared using three finishing protocols: a single 30 microm diamond (n = 25), two finishing diamonds (30/20 microm; n = 25) and a 30 microm diamond followed by a tungsten carbide finishing bur (n = 25). Final polishing of each of the three finishing groups was accomplished with SuperBuff, Diafix-oral, OneGloss, Astropol and HaWe Composite Polishers (n = 5, each). Surface roughness was evaluated quantitatively by laser-stylus profilometry. Average roughness (R(a)) was calculated; statistical analysis of the data was performed with two-way ANOVA and Scheffé post-hoc tests. The polished surfaces were examined qualitatively by SEM. The results showed significant effects on surface roughness from the different composites (p = 0.011) and polishing systems (p < 0.001). After polishing, the Solitaire surfaces (R(a) = 0.72 microm) were smoother than Definite (R(a) = 0.87 microm) and SureFil (R(a) = 0.89 microm) and significantly smoother than Herculite (R(a) = 0.92 microm; p = 0.011). Three of the polishing methods (SuperBuff, Diafix-oral and Astropol) achieved lower R(a)-values than Sof-Lex discs. The polishing quality of the one-step systems SuperBuff and Diafix-oral was strongly affected by the initial finishing protocol.

Study of Profile Changes during Mechanical Polishing using Relocation Profilometry

Science.gov (United States)

Kumaran, S. Chidambara; Shunmugam, M. S.

2017-10-01

Mechanical polishing is a finishing process practiced conventionally to enhance quality of surface. Surface finish is improved by mechanical cutting action of abrasive particles on work surface. Polishing is complex in nature and research efforts have been focused on understanding the polishing mechanism. Study of changes in profile is a useful method of understanding behavior of the polishing process. Such a study requires tracing same profile at regular process intervals, which is a tedious job. An innovative relocation technique is followed in the present work to study profile changes during mechanical polishing of austenitic stainless steel specimen. Using special locating fixture, micro-indentation mark and cross-correlation technique, the same profile is traced at certain process intervals. Comparison of different parameters of profiles shows the manner in which metal removal takes place in the polishing process. Mass removal during process estimated by the same relocation technique is checked with that obtained using weight measurement. The proposed approach can be extended to other micro/nano finishing processes and favorable process conditions can be identified.

Coastal Risk Management in a Changing Climate

DEFF Research Database (Denmark)

Existing coastal management and defense approaches are not well suited to meet the challenges of climate change and related uncertanities. Professionals in this field need a more dynamic, systematic and multidisciplinary approach. Written by an international group of experts, "Coastal Risk...... Management in a Changing Climate" provides innovative, multidisciplinary best practices for mitigating the effects of climate change on coastal structures. Based on the Theseus program, the book includes eight study sites across Europe, with specific attention to the most vulnerable coastal environments...... such as deltas, estuaries and wetlands, where many large cities and industrial areas are located. Integrated risk assessment tools for considering the effects of climate change and related uncertainties. Presents latest insights on coastal engineering defenses. Provides integrated guidelines for setting up...

Development of hybrid fluid jet/float polishing process

Science.gov (United States)

Beaucamp, Anthony T. H.; Namba, Yoshiharu; Freeman, Richard R.

2013-09-01

On one hand, the "float polishing" process consists of a tin lap having many concentric grooves, cut from a flat by single point diamond turning. This lap is rotated above a hydrostatic bearing spindle of high rigidity, damping and rotational accuracy. The optical surface thus floats above a thin layer of abrasive particles. But whilst surface texture can be smoothed to ~0.1nm rms (as measured by atomic force microscopy), this process can only be used on flat surfaces. On the other hand, the CNC "fluid jet polishing" process consists of pumping a mixture of water and abrasive particles to a converging nozzle, thus generating a polishing spot that can be moved along a tool path with tight track spacing. But whilst tool path feed can be moderated to ultra-precisely correct form error on freeform optical surfaces, surface finish improvement is generally limited to ~1.5nm rms (with fine abrasives). This paper reports on the development of a novel finishing method, that combines the advantages of "fluid jet polishing" (i.e. freeform corrective capability) with "float polishing" (i.e. super-smooth surface finish of 0.1nm rms or less). To come up with this new "hybrid" method, computational fluid dynamic modeling of both processes in COMSOL is being used to characterize abrasion conditions and adapt the process parameters of experimental fluid jet polishing equipment, including: (1) geometrical shape of nozzle, (2) position relative to the surface, (3) control of inlet pressure. This new process is aimed at finishing of next generation X-Ray / Gamma Ray focusing optics.

Coastal hazards: hurricanes, tsunamis, coastal erosion

Science.gov (United States)

Vandas, Stephen; Mersfelder, Lynne; Farrar, Frank; France, Rigoberto Guardado; Yajimovich, Oscar Efraín González; Muñoz, Aurora R.; Rivera, María del C.

1996-01-01

Oceans are the largest geographic feature on the surface of the Earth, covering approximately 70% of the planet's surface. As a result, oceans have a tremendous impact on the Earth, its climate, and its inhabitants. The coast or shoreline is the boundary between ocean environments and land habitats. By the year 2025, it is estimated that approximately two-thirds of the world's population will be living within 200 kilometers of a coast. In many ways, we treat the coast just like any other type of land area, as a safe and stable place to live and play. However, coastal environments are dynamic, and they constantly change in response to natural processes and to human activities.

Presentation of Coastal Environmental Management Plan by using ...

African Journals Online (AJOL)

The provision of environment management plan and formulating the environmental strategies of coastal regions are the most essential measures required for the integrated management of coastal regions. For this purpose, this research has been conducted using two goal-oriented and problem-oriented approaches in ...

Constrains in gamma spectrometry analysis of fallout 137Cs in coastal marine environment of Arabian sea in India

International Nuclear Information System (INIS)

Sartandel, S.J.; Jha, S.K.; Puranik, V.D.

2012-01-01

In this study, an accurate faster gamma spectrometry method for measuring the low level activity concentrations of 137 Cs using in situ pre-concentration technique on copper ferrocyanide cartridge was standardized. Due to unavailability of reference standard in the copper ferrocyanide matrix, efficiency calibration curves were plotted using RGU and RGTh reference standards. To harmonize the difference in density of standard and sample the required density correction factors for photo peak efficiency were generated. The in situ pre-concentration technique followed by gamma-ray spectrometry was applied for activity determination in surface seawater from eight locations in the coastal marine environment of Arabian Sea. The mean activity concentration of 137 Cs ranged between 0.71 and 0.91 Bq/m 3 . Higher activity concentrations were observed at location with latitude, longitude of 21.6 deg N, 69.57 deg E as compared to concentration observed at location with latitude, longitude 16.98 deg N, 73.25 deg E. The observed concentrations were found to be in range of data reported in Asia-Pacific Marine radioactive database (ASPARMARD). The results will fill up the gaps in the existing database. The generated data will be useful for monitoring fresh input of anthropogenic radionuclide into coastal marine environment for post Fukushima environmental assessment. (author)

Sensory factors affecting female consumers' acceptability of nail polish.

Science.gov (United States)

Sun, C; Koppel, K; Adhikari, K

2015-12-01

The objectives of this study were to determine what sensory factors impact consumers' acceptability of nail polishes, to explore how these sensory factors impact consumers' acceptability of nail polishes, to investigate whether there are any consumer segments according to their overall acceptability on different nail polishes and to scrutinize how the consumer segments are related to the sensory factors. Ninety-eight females participated in a nail polish consumer study at Kansas State University. Eight commercial products belonging to four categories - regular (REG), gel (GEL), flake (FLK) and water-based (WAT) - were evaluated. Each nail polish sample was evaluated twice by each participant in two different tasks - a task devoted to applying and evaluating the product and a task devoted to observing the appearance and evaluating the product. Pearson's correlation analysis, analysis of variance (ANOVA), external preference mapping, cluster analysis and internal preference mapping were applied for data analysis. Participants' scores of overall liking of the nail polishes were similar in the application task and in the observation task. In general, participants liked the REG and GEL product samples more than the FLK and WAT samples. Among all the sensory attributes, appearance attributes were the major factors that affected participants' overall liking. Aroma seemed to be a minor factor to participants' overall liking. Some sensory attributes, such as runny, shininess, opacity, spreadability, smoothness, coverage and wet appearance, were found to drive participants' overall acceptability positively, whereas others such as pinhole, fatty-edges, blister, brushlines, pearl-like, flake-protrusion, glittery and initial-drag impacted participants' overall acceptability negatively. Four clusters of participants were identified according to their overall liking scores from both the application task and the observation task. Participants' acceptability, based on different

Annual variations in zooplankton from a polluted coastal environment

Digital Repository Service at National Institute of Oceanography (India)

Haridas, P.; Menon, P.G.; Madhupratap, M.

Seasonal changes in the composition and distribution of zooplankton from the coastal waters of Trivandrum were studied. The study indicated that the effluent discharged from a nearby titanium dioxide factory did not affect the zooplankton abundance...

Taxonomic and functional distinctness of the fish assemblages in three coastal environments (bays, coastal lagoons and oceanic beaches) in Southeastern Brazil.

Science.gov (United States)

Azevedo, Márcia Cristina Costa; Gomes-Gonçalves, Rafaela de Sousa; Mattos, Tailan Moretti; Uehara, Wagner; Guedes, Gustavo Henrique Soares; Araújo, Francisco Gerson

2017-08-01

Several species of marine fish use different coastal systems especially during their early development. However, these habitats are jeopardized by anthropogenic influences threatening the success of fish populations, and urgent measures are needed to priorize areas to protect their sustainability. We applied taxonomic (Δ+) and functional (X+) distinctiveness indices that represent taxonomic composition and functional roles to assess biodiversity of three different costal systems: bays, coastal lagoons and oceanic beaches. We hypothesized that difference in habitat characteristics, especially in the more dynamism and habitat homogeneity of oceanic beaches compared with more habitat diversity and sheltered conditions of bays and coastal lagoons results in differences in fish richness and taxonomic and functional diversity. The main premise is that communities phylogenetically and functionally more distinct have more interest in conservation policies. Significant differences (P PERMANOVA. Fish richness was higher in bays compared with the coastal lagoons and oceanic beaches. Higher Δ+ was found for the coastal lagoons compared with the bays and oceanic beaches, with the bays having some values below the confidence limit. Similar patterns were found for X+, although all values were within the confidence limits for the bays, suggesting that the absence of some taxa does not interfere in functional diversity. The hypothesis that taxonomic and functional structure of fish assemblages differ among the three systems was accepted and we suggest that coastal lagoons should be priorized in conservation programs because they support more taxonomic and functional distinctiveness. Copyright © 2017 Elsevier Ltd. All rights reserved.

Adaptation and Validation of the Foot Function Index-Revised Short Form into Polish

Directory of Open Access Journals (Sweden)

Radosław Rutkowski

2017-01-01

Full Text Available Purpose. The aim of the present study was to adapt the Foot Function Index-Revised Short Form (FFI-RS questionnaire into Polish and verify its reliability and validity in a group of patients with rheumatoid arthritis (RA. Methods. The study included 211 patients suffering from RA. The FFI-RS questionnaire underwent standard linguistic adaptation and its psychometric parameters were investigated. The enrolled participants had been recruited for seven months as a convenient sample from the rheumatological hospital in Śrem (Poland. They represented different sociodemographic characteristics and were characterized as rural and city environments residents. Results. The mean age of the patients was 58.9±10.2 years. The majority of patients (85% were female. The average final FFI-RS score was 62.9±15.3. The internal consistency was achieved at a high level of 0.95 in Cronbach’s alpha test, with an interclass correlation coefficient ranging between 0.78 and 0.84. A strong correlation was observed between the FFI-RS and Health Assessment Questionnaire-Disability Index (HAQ-DI questionnaires. Conclusion. The Polish version of FFI-RS-PL indicator is an important tool for evaluating the functional condition of patients’ feet and can be applied in the diagnosis and treatment of Polish-speaking patients suffering from RA.

Adaptation and Validation of the Foot Function Index-Revised Short Form into Polish.

Science.gov (United States)

Rutkowski, Radosław; Gałczyńska-Rusin, Małgorzata; Gizińska, Małgorzata; Straburzyński-Lupa, Marcin; Zdanowska, Agata; Romanowski, Mateusz Wojciech; Romanowski, Wojciech; Budiman-Mak, Elly; Straburzyńska-Lupa, Anna

2017-01-01

The aim of the present study was to adapt the Foot Function Index-Revised Short Form (FFI-RS) questionnaire into Polish and verify its reliability and validity in a group of patients with rheumatoid arthritis (RA). The study included 211 patients suffering from RA. The FFI-RS questionnaire underwent standard linguistic adaptation and its psychometric parameters were investigated. The enrolled participants had been recruited for seven months as a convenient sample from the rheumatological hospital in Śrem (Poland). They represented different sociodemographic characteristics and were characterized as rural and city environments residents. The mean age of the patients was 58.9 ± 10.2 years. The majority of patients (85%) were female. The average final FFI-RS score was 62.9 ± 15.3. The internal consistency was achieved at a high level of 0.95 in Cronbach's alpha test, with an interclass correlation coefficient ranging between 0.78 and 0.84. A strong correlation was observed between the FFI-RS and Health Assessment Questionnaire-Disability Index (HAQ-DI) questionnaires. The Polish version of FFI-RS-PL indicator is an important tool for evaluating the functional condition of patients' feet and can be applied in the diagnosis and treatment of Polish-speaking patients suffering from RA.

Note on the polishing of small spheres of ferrimagnetic materials

Energy Technology Data Exchange (ETDEWEB)

Grunberg, J. G.; Antier, G. [Centre d' etudes nucleaires de Grenoble - C.E.N.G. (France); Seiden, P. E. [Institut Fourier, Universite de Grenoble (France)

1961-07-01

This note describes a simple and rapid method that we have used for obtaining a high degree of polish on spheres of ferrimagnetic materials. A high surface polish is of particular importance if one desires to perform ferrimagnetic resonance experiments on very narrow linewidth materials such as Yttrium Iron Garnet. It is not possible to obtain the very narrow linewidths without polishing the sample with a very fine abrasive such as 'Linde A'. Although the methods presently used for the fine polishing of ferrite spheres give satisfactory results, the method described here is of particular interest because of its simplicity and speed. For example with the air-jet tumbling technique it can take as long as three days of polishing to obtain an acceptable surface while our method will give the same results in one to two hours. (author)

Polish energy-system modernisation

International Nuclear Information System (INIS)

Drozdz, M.

2003-01-01

The Polish energy-system needs intensive investments in new technologies, which are energy efficient, clean and cost effective. Since the early 1990s, the Polish economy has had practically full access to modern technological devices, equipment and technologies. Introducing new technologies is a difficult task for project teams, constructors and investors. The author presents a set of principles for project teams useful in planning and energy modernisation. Several essential features are discussed: Energy-efficient appliances and systems; Choice of energy carriers, media and fuels; Optimal tariffs, maximum power and installed power; Intelligent, integrated, steering systems; Waste-energy recovery; Renewable-energy recovery. In practice there are several difficulties connected with planning and realising good technological and economic solutions. The author presents his own experiences of energy-system modernisation of industrial processes and building new objects. (Author)

Initial polishing time affects gloss retention in resin composites.

Science.gov (United States)

Waheeb, Nehal; Silikas, Nick; Watts, David

2012-10-01

To determine the effect of finishing and polishing time on the surface gloss of various resin-composites before and after simulated toothbrushing. Eight representative resin-composites (Ceram X mono, Ceram X duo, Tetric EvoCeram, Venus Diamond, EsteliteSigma Quick, Esthet.X HD, Filtek Supreme XT and Spectrum TPH) were used to prepare 80 disc-shaped (12 mm x 2 mm) specimens. The two step system Venus Supra was used for polishing the specimens for 3 minutes (Group A) and 10 minutes (Group B). All specimens were subjected to 16,000 cycles of simulated toothbrushing. The surface gloss was measured after polishing and after brushing using the gloss meter. Results were evaluated using one way ANOVA, two ways ANOVA and Dennett's post hoc test (P = 0.05). Group B (10-minute polishing) resulted in higher gloss values (GV) for all specimens compared to Group A (3 minutes). Also Group B showed better gloss retention compared to Group A after simulated toothbrushing. In each group, there was a significant difference between the polished composite resins (P gloss after the simulated toothbrushing.

Sexual Health of Polish Athletes with Disabilities

Directory of Open Access Journals (Sweden)

Ryszard Plinta

2015-06-01

Full Text Available The purpose of this study was to determine sexual functioning of Polish athletes with disabilities (including paralympians. The study encompassed 218 people with physical disabilities, aged between 18 and 45 (149 men and 69 women. The entire research population was divided into three groups: Polish paralympians (n = 45, athletes with disabilities (n = 126 and non-athletes with disabilities (n = 47. The quality of sexual life of Polish paralympians was measured by using the Polish version of Female Sexual Function Index and International Index of Erectile Function. Clinically significant erectile dysfunctions were most often diagnosed in non-athletes (83.33% with 50% result of severe erectile dysfunctions, followed by athletes and paralympians with comparable results of 56.98% and 54.17% respectively (p = 0.00388. Statistically significant clinical sexual dysfunctions concerned lubrication, orgasm as well as pain domains, and prevailed among female non-athletes (68.42%, 68.42% and 57.89%. Practising sports at the highest level has a favourable effect on the sexuality of men and women with physical disabilities. Men with physical disabilities manifest more sexual disorders than women, an aspect which should be considered by health-care professionals working with people with disabilities.

Seasonal phytoplankton blooms associated with monsoonal influences and coastal environments in the sea areas either side of the Indochina Peninsula

Science.gov (United States)

Tang, Dan Ling; Kawamura, Hiroshi; Shi, Ping; Takahashi, Wataru; Guan, Lei; Shimada, Teruhisa; Sakaida, Futoki; Isoguchi, Osamu

2006-03-01

The Gulf of Thailand (GoT) is a semienclosed sea on the west and southwest side of the Indochina Peninsula and connects with the near-coastal waters of the South China Sea (SCS) on the east and northeast side of the Malay Peninsula. The objective of the present study is to understand dynamic features of the phytoplankton biology in the GoT and the nearby SCS, on both sides of the Indochina Peninsula, using remote-sensing measurements of chlorophyll-a (Chl a), sea surface temperature (SST), and surface vector winds obtained during the period from September 1997 to March 2003. Results show that seasonal variations of the phytoplankton blooms are primarily controlled by the monsoonal winds and related coastal environments. The GoT and the near-coastal SCS have a peak in the averaged monthly Chl a in December and January, which is associated with the winter northeaster monsoon. The near-coastal SCS have another big peak in the averaged monthly Chl a in summer (July to September), which is associated with the summer southwest monsoon. The offshore bloom in the GoT occurs in its southern part and enhances the December-January peak of averaged monthly Chl a. By contrast, the offshore bloom in the nearby SCS is observed northeast of the Peninsula, and represents the primary source of the July-September peak Chl a. Here the coastal upwelling associated with the offshore Ekman transport caused by the coastal surface winds parallel to the Vietnam east coast gives physical conditions favorable to the development of offshore phytoplankton blooms. The Mekong River discharge waters flow in different directions, depending on the monsoon winds, and contributes to seasonal blooms on both sides of the Peninsula.

Presentation of the verbs in Bulgarian-Polish electronic dictionary

Directory of Open Access Journals (Sweden)

Ludmila Dimitrova

2014-09-01

Full Text Available Presentation of the verbs in Bulgarian-Polish electronic dictionary This paper briefly discusses the presentation of the verbs in the first electronic Bulgarian-Polish dictionary that is currently being developed under a bilateral collaboration between IMI-BAS and ISS-PAS. Special attention is given to the digital entry classifiers that describe Bulgarian and Polish verbs. Problems related to the correspondence between natural language phenomena and their presentations are discussed. Some examples illustrate the different types of dictionary entries for verbs.

"Agricultural budget" and the competitiveness of the Polish agriculture

OpenAIRE

Lenkiewicz, Stanisław; Rokicki, Bartłomiej

2014-01-01

The aim of the publication is to assess the impact of public support on the functioning of the Polish agriculture. In order to achieve this aim the publication includes an analysis of the system of direct payments and rural development policy instruments planned to be implemented in Poland within the CAP 2014-2020. The study also presents an analysis of regional diversity of the Polish agriculture and an assessment of the scale of agricultural investment made in recent years in all the Polish...

Computer-Controlled Cylindrical Polishing Process for Development of Grazing Incidence Optics for Hard X-Ray Region

Science.gov (United States)

Khan, Gufran Sayeed; Gubarev, Mikhail; Speegle, Chet; Ramsey, Brian

2010-01-01

The presentation includes grazing incidence X-ray optics, motivation and challenges, mid spatial frequency generation in cylindrical polishing, design considerations for polishing lap, simulation studies and experimental results, future scope, and summary. Topics include current status of replication optics technology, cylindrical polishing process using large size polishing lap, non-conformance of polishin lap to the optics, development of software and polishing machine, deterministic prediction of polishing, polishing experiment under optimum conditions, and polishing experiment based on known error profile. Future plans include determination of non-uniformity in the polishing lap compliance, development of a polishing sequence based on a known error profile of the specimen, software for generating a mandrel polishing sequence, design an development of a flexible polishing lap, and computer controlled localized polishing process.

Effects of Polishing Bur Application Force and Reuse on Sintered Zirconia Surface Topography.

Science.gov (United States)

Fischer, N G; Tsujimoto, A; Baruth, A G

2018-03-16

Limited information is available on how to polish and finish zirconia surfaces following computer-aided design/computer-aided manufacturing (CAD/CAM), specifically, how differing application forces and reuse of zirconia polishing systems affect zirconia topography. To determine the effect of differing, clinically relevant, polishing application forces and multiple usages of polishing burs on the surface topography of CAD/CAM zirconia. One hundred twenty 220-grit carbide finished zirconia disks were sintered according to manufacturer's directions and divided into two groups for the study of two coarse polishing bur types. Each group was divided into subgroups for polishing (15,000 rpm) at 15 seconds for 1.0 N, 4.5 N, or 11 N of force using a purpose-built fixture. Subgroups were further divided to study the effects of polishing for the first, fifth, 15th, and 30th bur use, simulating clinical procedures. Unpolished surfaces served as a control group. Surfaces were imaged with noncontact optical profilometry (OP) and atomic force microscopy (AFM) to measure average roughness values (Ra). Polishing burs were optically examined for wear. Scanning electron microscopy (SEM) was performed on burs and zirconia surfaces. One-way ANOVA with post hoc Tukey HSD (honest significant difference) tests (α=0.05) were used for statistical analyses. AFM and OP Ra values of all polished surfaces were significantly lower than those of the unpolished control. Different polishing forces and bur reuse showed no significant differences in AFM Ra. However, significant differences in OP Ra were found due to differing application forces and bur reuse between the first and subsequent uses. SEM and optical micrographs revealed notable bur wear, increasing with increasing reuse. SEM and AFM micrographs clearly showed polished, periodic zirconia surfaces. Nanoscale topography, as analyzed with kurtosis and average groove depth, was found dependent on the specific polishing bur type. These in

The Czechoslovak-Polish Club in Brno (1925–1939)

Czech Academy of Sciences Publication Activity Database

Baron, Roman

2011-01-01

Roč. 3, č. 1 (2011), s. 43-64 ISSN 1803-6546 Institutional research plan: CEZ:AV0Z80150510 Keywords : Czechoslovak-Polish solidarity * Czechoslovak-Polish relations * Brno * associations * Interwar Period Subject RIV: AB - History

Performance test of condensate polishing system for Qinshan Nuclear Power Plant

International Nuclear Information System (INIS)

You Zhaojin; Qian Shijun; Lu Ruiting

1995-11-01

The flow chart, resin performance and water quality specifications of the condensate polishing system for Qinshan Nuclear Power Plant (QNPP) are briefly described. The initial regeneration process and the following service of the condensate polishing system are introduced. And the ability to remove corrosion products and ionic impurities of the condensate polishing system are verified during start-up, normal power operation and condenser leakage of the plant. The result shows that the performance of condensate polishing system in QNPP can completely meet the design requirements. Especially during the start-up of the unit or the leakage of the condenser, despite the inlet water quality of the polishers is far worse than the specified standard, the outlet water quality is still controlled within the indexes. Finally, several existing problems, such as 'volume ratio between resins is not optimum' and 'the inert resin and anion resin can not be stratified completely', in the condensate polishing system are also discussed. (4 refs., 1 fig., 8 tabs.)

Influence of polishing on surface roughness following toothbrushing wear of composite resins.

Science.gov (United States)

Dalla-Vecchia, Karine Battestin; Taborda, Talita Damas; Stona, Deborah; Pressi, Heloísa; Burnett Júnior, Luiz Henrique; Rodrigues-Junior, Sinval Adalberto

2017-01-01

This study aimed to evaluate the influence of different polishing systems on the surface roughness of composite resins following procedures to simulate the effects of toothbrushing over time. Four currently available commercial composites were used to make 128 cylindrical specimens. The specimens were randomly allocated to polishing with a 1-step polisher or 1 of 3 multistep polishers (n = 8 per group). The baseline surface roughness was measured, and the specimens were submitted to 5000, 10,000, and 20,000 brushing cycles to represent toothbrushing throughout 6, 12, and 24 months, respectively. Results showed that surface roughness was influenced by the type of composite and polishing system and was not influenced by the simulated toothbrushing time. However, the surface roughness, as challenged by toothbrushing wear, was affected by the interaction among the composite, the polisher, and the toothbrushing time. The 1-step polisher produced the highest surface roughness and influenced toothbrushing wear resistance of some composites.

Prevalence and socioeconomic determinants of leisure time physical activity among Polish farmers.

Science.gov (United States)

Biernat, Elżbieta; Piątkowska, Monika; Mynarski, Władysław

2018-03-14

The aim of this study is to evaluate the leisure time physical activity of Polish farmers in the context of meeting health-related recommendations, and to diagnose the social and economic determinants. The analysis concerned leisure and transportation activities of various intensity and sedentary time. Farmers (n=153) aged over 18 were selected from a representative sample of Polish society (n=2039). In order to evaluate LTPA, the long version of the IPAQ was used. Statistically significant differences between the variables were tested using non-parametric tests. The relationship between the amount of exercise recommended by the WHO and studied socio-demographic criteria was assessed using log-linear analysis. The WHO health recommendations were met by 33.3% of farmers. Shares in LTPA (19.1%) and transportation (19.2%) significantly increased the chance of achieving these norms (OR=12.54 and 0.07, respectively). Along with age (≥40 years) and income (≥3000 PLN/Є750) of Polish farmers, the risk of insufficient physical activity increased. Average MET-min/week for LTPA was 299.8±583.4 and transportation - 521.2±1973.9. The average time of sitting during working days was 4.4±2.9, while it was 4.5±3.2 hrs/day during weekends. Health-promoting changes are necessary among Polish farmers, including an increase in the awareness of health benefits and the necessity of undertaking physically active ways of spending leisure time. It seems to be a legitimate action to develop a mini-tourist trail in the rural environment as a means of promoting physical activity also among women aged over 40, and from lower income groups, who are especially threatened by inactivity.

Summaries of the 40. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry

International Nuclear Information System (INIS)

1997-01-01

Annual 40. Scientific Assembly of Polish Chemical Society and Association of Engineers and Technicians of Chemical Industry has been held in Gdansk on 22-26 September 1997. The most valuable scientific results obtained in Polish Laboratories have been presented in 22 main sections and 7 symposia directed especially at following subjects: analytical chemistry, biochemistry, solid state chemistry and material science, physical chemistry, heteroorganic and coordination chemistry, medical and pharmaceutical chemistry, metalorganic chemistry, inorganic and organic chemistry, polymers chemistry, chemistry and environment protection, theoretical chemistry, chemical didactics, photochemistry, radiation chemistry and chemical kinetics, chemical engineering, catalysis, crystallochemistry, chemical technology, electrochemistry, and instrumental methods

Changes in the coastal and marine environments

Digital Repository Service at National Institute of Oceanography (India)

DeSousa, S.N.; Ahmed, A.U.; DileepKumar, M.; Jagtap, T.G.; Sardessai, S.; Hassan, A.

to the euphotic layer. These factors make the Arabian Sea a potentially fertile area, since any vertical disturbance that can disrupt or shift the thermocline banier can lead to injection of nutrients into the euphotic layer and fuel increased biological...) injecting nutrients from the thermocline region into the surface layer, as observed by de Sousa et a!. (1996b). 1.1.3 Biological Response It was seen in sections 1.1.1-1.1.2 that processes of upwelling (both coastal and open ocean) during summer monsoon...

Alien species of fish parasites in the coastal lakes and lagoons of the southern Baltic

Directory of Open Access Journals (Sweden)

Jolanta Morozińska-Gogol

2009-03-01

Full Text Available Alien species are now found all over the world. New fish parasites have been unintentionally introduced with infected alien fish imported for aquaculture or have sometimes spread with their intermediate invertebrate hosts transported in the ballast waters of ships. Four alien fish parasites have been recorded in Polish coastal lakes and lagoons, all parasitising eels. Three were introduced with the final host - the Japanese eel - introduced for aquaculture (Anguillicola crassus, Pseudodactylogyrus anguillae and Pseudodactylogyrus bini and one (Paratenuisentis ambiguus with its sole intermediate host (Gammarus tigrinus.

Surface analysis of polished fused-silica laser lenses by ion-scattering spectrometry

International Nuclear Information System (INIS)

Orvek, K.; Steward, S.A.

1982-01-01

New advances in high-powered glass lasers, particularly the NOVA system, have resulted in a need for lenses having higher damage threshold values than those now available. It is currently thought that surface contaminants on the lenses are responsible for initiating part of the damage. These contaminants are apparently introduced during the final polishing stages. In this study, we used ion-scattering spectrometry (ISS) to identify contaminants arising through the use of different polishing techniques. Five lenses were studied, each having undergone different polishing procedures. The first lens was not polished after receiving it from the manfacturer (No. 381). Ion microprobe data were available for this lens, and they were compared to ISS results. The second lens had been polished with rouge, a polishing compound no longer in use (No. 796). This sample served as a further check on the ISS results. The third lens was studied as received from the manufacturer - with no handling or cleaning (No. 802). The final two lenses had both been polished using high-purity ceria, cerium oxide (No. 800 and No. 801). The difference between these two was that No. 800 was polished using a nylon lap, and No. 801 was polished using pitch as a lap. The 800-series lenses were all made from the same batch, and constituted the major part of the investigation

1.06 μm 150 psec laser damage study of diamond turned, diamond turned/polished and polished metal mirrors

International Nuclear Information System (INIS)

Saito, T.T.; Milam, D.; Baker, P.; Murphy, G.

1975-01-01

Using a well characterized 1.06 μm 150 ps glass laser pulse the damage characteristics for diamond turned, diamond turned/ polished, and polished copper and silver mirrors less than 5 cm diameter were studied. Although most samples were tested with a normal angle of incidence, some were tested at 45 0 with different linear polarization showing an increase in damage threshold for S polarization. Different damage mechanisms observed will be discussed. Laser damage is related to residual surface influences of the fabrication process. First attempts to polish diamond turned surfaces resulted in a significant decrease in laser damage threshold. The importance of including the heat of fusion in the one dimensional heat analysis of the theoretical damage threshold and how close the samples came to the theoretical damage threshold is discussed. (auth)

The study of optimization on process parameters of high-accuracy computerized numerical control polishing

Science.gov (United States)

Huang, Wei-Ren; Huang, Shih-Pu; Tsai, Tsung-Yueh; Lin, Yi-Jyun; Yu, Zong-Ru; Kuo, Ching-Hsiang; Hsu, Wei-Yao; Young, Hong-Tsu

2017-09-01

Spherical lenses lead to forming spherical aberration and reduced optical performance. Consequently, in practice optical system shall apply a combination of spherical lenses for aberration correction. Thus, the volume of the optical system increased. In modern optical systems, aspherical lenses have been widely used because of their high optical performance with less optical components. However, aspherical surfaces cannot be fabricated by traditional full aperture polishing process due to their varying curvature. Sub-aperture computer numerical control (CNC) polishing is adopted for aspherical surface fabrication in recent years. By using CNC polishing process, mid-spatial frequency (MSF) error is normally accompanied during this process. And the MSF surface texture of optics decreases the optical performance for high precision optical system, especially for short-wavelength applications. Based on a bonnet polishing CNC machine, this study focuses on the relationship between MSF surface texture and CNC polishing parameters, which include feed rate, head speed, track spacing and path direction. The power spectral density (PSD) analysis is used to judge the MSF level caused by those polishing parameters. The test results show that controlling the removal depth of single polishing path, through the feed rate, and without same direction polishing path for higher total removal depth can efficiently reduce the MSF error. To verify the optical polishing parameters, we divided a correction polishing process to several polishing runs with different direction polishing paths. Compare to one shot polishing run, multi-direction path polishing plan could produce better surface quality on the optics.

Electrolytic polishing system for space age materials

International Nuclear Information System (INIS)

Coons, W.C.; Iosty, L.R.

1976-01-01

A simple electrolytic polishing technique was developed for preparing Cr, Co, Hf, Mo, Ni, Re, Ti, V, Zr, and their alloys for structural analysis on the optical microscope. The base electrolyte contains 5g ZnCl 2 and 15g AlCl 3 . 6H 2 O in 200 ml methyl alcohol, plus an amount of H 2 SO 4 depending on the metal being polished. Five etchants are listed

Accelerated life assessment of coating on the radar structure components in coastal environment.

Science.gov (United States)

Liu, Zhe; Ming, ZhiMao

2016-07-04

This paper aimed to build an accelerated life test scheme and carry out quantitative analysis between accelerated life test in the laboratory and actual service for the coating composed of epoxy primer and polyurethane paint on structure components of some kind of radar served in the coastal environment of South China Sea. The accelerated life test scheme was built based on the service environment and failure analysis of the coating. The quantitative analysis between accelerated life test and actual service was conducted by comparing the gloss loss, discoloration, chalking, blistering, cracking and electrochemical impedance spectroscopy of the coating. The main factors leading to the coating failure were ultraviolet radiation, temperature, moisture, salt fog and loads, the accelerated life test included ultraviolet radiation, damp heat, thermal shock, fatigue and salt spray. The quantitative relationship was that one cycle of the accelerated life test was equal to actual service for one year. It was established that one cycle of the accelerated life test was equal to actual service for one year. It provided a precise way to predict actual service life of newly developed coatings for the manufacturer.

Effects of different polishing techniques on the surface roughness of dental porcelains

Directory of Open Access Journals (Sweden)

Işil Sarikaya

2010-02-01

Full Text Available OBJECTIVE: The purpose of this study was to evaluate the effects of different polishing techniques on the surface roughness of dental porcelains. MATERIAL AND METHODS: Fifty-five cylindirical specimens (15x2 mm were prepared for each feldspathic (Vita VMK 95, Ceramco III and low-fusing dental porcelain (Matchmaker. Fifty-five specimens of machinable feldspathic porcelain blocks (Vitablocs Mark II, (12x14x18 mm were cut into 2-mm-thick slices (12x14 mm with low speed saw. The prepared specimens were divided into 11 groups (n=5 representing different polishing techniques including control ((C no surface treatment, glaze (G and other 9 groups that were finished and polished with polishing discs (Sof-Lex (Sl, two porcelain polishing kits (NTI (Pk, Dialite II (Di, a diamond polishing paste (Sparkle (Sp, a zirconium silicate based cleaning and polishing prophy paste (Zircate (Zr, an aluminum oxide polishing paste (Prisma Gloss (Pg, and combinations of them. The surface roughness of all groups was measured with a profilometer. The data were analyzed with a 2-way analysis of variance, and the mean values were compared by the Tukey Honestly Significant Difference test (a=0.05. RESULTS: For all porcelain material groups, the lowest Ra values were observed in Group Gl, Group Sl, Group Pk, and Group Di, which were not significantly different from each other (p>0.05.When comparing the 4 different porcelain materials, the machinable feldspathic porcelain block group (Mark II demonstrated statistically significantly less Ra values than the other porcelain materials tested (p<0.05. No significant difference was observed between the VMK 95 and Ceramco III porcelain groups (p=0.919, also these groups demonstrated the highest Ra values. CONCLUSION: Subjected to surface roughness, the surfaces obtained with polishing and/or cleaning-prophy paste materials used alone were rougher compared to the surfaces finished using Sof-lex, Dialite, and NTI polishing kit

Dispersal patterns, active behaviour, and flow environment during early life history of coastal cold water fishes.

Science.gov (United States)

Stanley, Ryan; Snelgrove, Paul V R; Deyoung, Brad; Gregory, Robert S

2012-01-01

During the pelagic larval phase, fish dispersal may be influenced passively by surface currents or actively determined by swimming behaviour. In situ observations of larval swimming are few given the constraints of field sampling. Active behaviour is therefore often inferred from spatial patterns in the field, laboratory studies, or hydrodynamic theory, but rarely are these approaches considered in concert. Ichthyoplankton survey data collected during 2004 and 2006 from coastal Newfoundland show that changes in spatial heterogeneity for multiple species do not conform to predictions based on passive transport. We evaluated the interaction of individual larvae with their environment by calculating Reynolds number as a function of ontogeny. Typically, larvae hatch into a viscous environment in which swimming is inefficient, and later grow into more efficient intermediate and inertial swimming environments. Swimming is therefore closely related to length, not only because of swimming capacity but also in how larvae experience viscosity. Six of eight species sampled demonstrated consistent changes in spatial patchiness and concomitant increases in spatial heterogeneity as they transitioned into more favourable hydrodynamic swimming environments, suggesting an active behavioural element to dispersal. We propose the tandem assessment of spatial heterogeneity and hydrodynamic environment as a potential approach to understand and predict the onset of ecologically significant swimming behaviour of larval fishes in the field.

Indo-Pacific bottlenose dolphin (Tursiops aduncus) habitat preference in a heterogeneous, urban, coastal environment.

Science.gov (United States)

Cribb, Nardi; Miller, Cara; Seuront, Laurent

2013-02-01

Limited information is available regarding the habitat preference of the Indo-Pacific bottlenose dolphin (Tursiops aduncus) in South Australian estuarine environments. The need to overcome this paucity of information is crucial for management and conservation initiatives. This preliminary study investigates the space-time patterns of habitat preference by the Indo-Pacific bottlenose dolphin in the Port Adelaide River-Barker Inlet estuary, a South Australian, urbanised, coastal environment. More specifically, the study aim was to identify a potential preference between bare sand substrate and seagrass beds, the two habitat types present in this environment, through the resighting frequency of recognisable individual dolphins. Photo-identification surveys covering the 118 km2 sanctuary area were conducted over 2 survey periods May to August 2006 and from March 2009 to February 2010. Sighting frequency of recognisable individual Indo-Pacific bottlenose dolphins established a significant preference for the bare sand habitat. More specifically, 72 and 18% of the individuals sighted at least on two occasions were observed in the bare sand and seagrass habitats respectively. This trend was consistently observed at both seasonal and annual scales, suggesting a consistency in the distinct use of these two habitats. It is anticipated that these results will benefit the further development of management and conservation strategies.

Life cycle assessment study on polishing units for use of treated wastewater in agricultural reuse.

Science.gov (United States)

Büyükkamacı, Nurdan; Karaca, Gökçe

2017-12-01

A life cycle assessment (LCA) approach was used in the assessment of environmental impacts of some polishing units for reuse of wastewater treatment plant effluents in agricultural irrigation. These alternative polishing units were assessed: (1) microfiltration and ultraviolet (UV) disinfection, (2) cartridge filter and ultrafiltration (UF), and (3) just UV disinfection. Two different energy sources, electric grid mix and natural gas, were considered to assess the environmental impacts of them. Afterwards, the effluent of each case was evaluated against the criteria required for irrigation of sensitive crops corresponding to Turkey regulations. Evaluation of environmental impacts was carried out with GaBi 6.1 LCA software. The overall conclusion of this study is that higher electricity consumption causes higher environmental effects. The results of the study revealed that cartridge filter and UF in combination with electric grid mix has the largest impact on the environment for almost all impact categories. In general, the most environmentally friendly solution is UV disinfection. The study revealed environmental impacts for three alternatives drawing attention to the importance of the choice of the most appropriate polishing processes and energy sources for reuse applications.

Polish Phoneme Statistics Obtained On Large Set Of Written Texts

Directory of Open Access Journals (Sweden)

Bartosz Ziółko

2009-01-01

Full Text Available The phonetical statistics were collected from several Polish corpora. The paper is a summaryof the data which are phoneme n-grams and some phenomena in the statistics. Triphonestatistics apply context-dependent speech units which have an important role in speech recognitionsystems and were never calculated for a large set of Polish written texts. The standardphonetic alphabet for Polish, SAMPA, and methods of providing phonetic transcriptions are described.

Polishing compound for plastic surfaces

Science.gov (United States)

Stowell, M.S.

1991-01-01

This invention is comprised of a polishing compound for plastic materials. The compound includes approximately by approximately by weight 25 to 80 parts at least one petroleum distillate lubricant, 1 to 12 parts mineral spirits, 50 to 155 parts abrasive paste, and 15 to 60 parts water. Preferably, the compound includes approximately 37 to 42 parts at least one petroleum distillate lubricant, up to 8 parts mineral spirits, 95 to 110 parts abrasive paste, and 50 to 55 parts water. The proportions of the ingredients are varied in accordance with the particular application. The compound is used on PLEXIGLAS{trademark}, LEXAN{trademark}, LUCITE{trademark}, polyvinyl chloride (PVC), and similar plastic materials whenever a smooth, clear polished surface is desired.

Study on the Effects of Corrosion Inhibitor According to the Functional Groups for Cu Chemical Mechanical Polishing in Neutral Environment

Energy Technology Data Exchange (ETDEWEB)

Lee, Sang Won; Kim, Jae Jeong [Institute of Chemical Process, Seoul National University, Seoul (Korea, Republic of)

2015-08-15

As the aluminum (Al) metallization process was replaced with copper (Cu), the damascene process was introduced, which required the planarization step to eliminate over-deposited Cu with Chemical Mechanical Polishing (CMP) process. In this study, the verification of the corrosion inhibitors, one of the Cu CMP slurry components, was conducted to find out the tendency regarding the carboxyl and amino functional group in neutral environment. Through the results of etch rate, removal rate, and chemical ability of corrosion inhibitors based on 1H-1,2,4-triazole as the base corrosion inhibitor, while the amine functional group presents high Cu etching ability, carboxyl functional group shows lower Cu etching ability than base-corrosion inhibitor which means that it increases passivation effect by making strong passivation layer. It implies that the corrosion inhibitor with amine functional group was proper to apply for 1st Cu CMP slurry owing to the high etch rate and with carboxyl functional group was favorable for the 2nd Cu CMP slurry due to the high Cu removal rate/dissolution rate ratio.

Coastal environment of the Beaufort Sea from field data and ERTS-1 imagery, summer 1972

Science.gov (United States)

Reimnitz, E. (Principal Investigator); Barnes, P. W.

1972-01-01

The author has identified the following significant results. An extensive field program during the spring and summer in the coastal Beaufort Sea test site has been completed using a wide variety of sensing techniques. Reduction of field data and ERTS-1 image analysis have shown the coastal environment to be complexly influenced by unique processes, most of which involve or are related to sea ice. Active sedimentologic processes along the Arctic coast are set in motion by the melting, flooding, and eventual overflow of rivers onto the sea ice. It is now apparent that only minor amounts of sediment are transported offshore at this stage; however, scouring of the bottom is significant beneath the strudels (drain holes) which develop in the fast ice canopy in the region of overflow. Areal salinity and turbidity patterns together with ERTS-1 imagery confirm a consistent influx of colder, clearer, saltier water towards the coast just east of the Colville River. Strong (up to 3 knots) bidirectional but intermittent currents often manifest themselves in imagery and aerial photographs as wakes behind grounded ice. Ice movement vectors generated from repetitive images indicate that ice drift is closely associated with wind direction, especially in shallow bays, and displacements of 4-22 kilometers were noted in 24 hours.

Pseudo-random tool paths for CNC sub-aperture polishing and other applications.

Science.gov (United States)

Dunn, Christina R; Walker, David D

2008-11-10

In this paper we first contrast classical and CNC polishing techniques in regard to the repetitiveness of the machine motions. We then present a pseudo-random tool path for use with CNC sub-aperture polishing techniques and report polishing results from equivalent random and raster tool-paths. The random tool-path used - the unicursal random tool-path - employs a random seed to generate a pattern which never crosses itself. Because of this property, this tool-path is directly compatible with dwell time maps for corrective polishing. The tool-path can be used to polish any continuous area of any boundary shape, including surfaces with interior perforations.

Phonematic translation of Polish texts by the neural network

International Nuclear Information System (INIS)

Bielecki, A.; Podolak, I.T.; Wosiek, J.; Majkut, E.

1996-01-01

Using the back propagation algorithm, we have trained the feed forward neural network to pronounce Polish language, more precisely to translate Polish text into its phonematic counterpart. Depending on the input coding and network architecture, 88%-95% translation efficiency was achieved. (author)

Management Restoration Plans for Coastal Villages

Directory of Open Access Journals (Sweden)

Rudianto Rudianto

2017-03-01

Full Text Available The village is located in the coastal area up to this time has decreased the quality of the coastal environment either caused by the process of natural or anthropogenic processes. Coastal damage Persistent will affect people's lives. Based on studies conducted by Rudianto (2013 and continued research by Rudianto (2014 on the institutional model for implementing the strategy, the resulting output coast of research called restoration plan for coastal villages or R2DP coastal villages. The objective of R2DP is helping the village administration to alleviate the problems of coastal areas. R2DP is a guideline that will be used by the village government based on a legal framework called the village regulations. The method used to compile R2DP is descriptive method. By using the method of Miles and Huberman (1984 used data reduction techniques. This technique is to pick and choose which data is critical to focus on the purpose of research. the results of research to produce findings about the restoration plan or a coastal village called R2DP. The essence of the mechanism and procedure R2DP is doing the restoration work by using institutions as a means of restoration.

Tribological approach to study polishing of road surface under traffic

OpenAIRE

KANE, Malal; DO, Minh Tan

2007-01-01

The polishing phenomenon of road pavements under the vehicle traffic constitutes the main mechanism inherent to the loss of skid resistance over time. A better understanding of this phenomenon would allow an improvement of road safety. This study comprises a review of laboratory test and a model simulating the polishing of road surfaces. The laboratory test uses a polishing machine so called 'Wehner-Schulze' which can reproduce the evolution of the road texture from specimens taken directly f...

Characteristics and environmental carrying capacities of coastal area in Yogyakarta Special Region for aquaculture

Science.gov (United States)

Triyatmo, B.; Rustadi; Priyono, S. B.

2018-03-01

The purpose of this study were to determine characteristics and environmental carrying capacities of coastal area in Yogyakarta Special Region for aquaculture. This study was conducted in 2015 by characterizing land and water dynamics, land use, and the suitability of coastal environments for aquaculture. Evaluation on the coastal environments suitability for aquaculture ponds was based on the landforms, soil properties, water quality and land. Selection of coastal locations for aquaculture development was based on the level of suitability of coastal environment. The results showed that the coastal in Kulon Progo and Bantul Regencies were characterized by sand dune and beach ridge with sandy soil texture, while in Gunungkidul Regency was characterized by limestone hill with rocky texture. Water sources of the coastal area were the sea, river, and ground water with the salinity of 31–37, 7–11, 7–31 ppt and pH of 7.4–8.4 7.0–8.2 and 7.4–9.9, respectively. The coastal lands were used for seasonal/annual planting, ponds, fish landing sites, tourism areas and conservation areas. The coastal carrying capacity was rather suitable for aquaculture, especially in the sandy soil area. Aquaculture in that area can be done intensively for shrimp (Litopenaeus vannamei), using biocrete (biological material) or plastic sheet.

The place of polish in the multilingual space of the European Union

Directory of Open Access Journals (Sweden)

T. I. Neprytska

2015-03-01

Full Text Available The article studies the position of the Polish language in the multilingual space of the European Union and determines the key factors which facilitate its gaining popularity and spreading in Europe. A large territory and population determine the significant presence of Polish in the European Union. Intense economic development facilitates popularization of learning and using Polish in the business medium, however, English was and still remains the dominating language of business. Active work of the state on improving the reputation of the country abroad, civilizational (value­based unity with other nations of the EU, favorable geographical position, common Indo­European roots of Germanic, Romanic and Slavonic  languages as well as usage of the Latin type create favorable conditions for the development and popularization of Polish on the territory of the EU. The article also mentions a number of concerns, which are rooted in the historical past of a dependent or semi­dependent existence of the Polish people, namely, the existence of the Polish and culture in the shade of German and Russian culture space, the negative international image of modern Poland, which was formed at the beginning of the 1990­s, the low level of Europeans’ familiarization with the Polish culture, absence of popularity and economic necessity of learning Polish abroad.

Coastal fog, climate change, and the environment

Science.gov (United States)

Torregrosa, Alicia; O'Brien, Travis A.; Faloona, Ian C.

2014-01-01

Coastal marine fog, a characteristic feature of climates generated at the eastern boundaries of ocean basins worldwide, evokes different feelings in those who experience it (see Figure 1). Authors and poets use fog to represent mystery, bleakness, and confusion. Film directors seek out fog to shroud scenes in eerie gloominess. Tourists visiting beaches bemoan the cool and damp conditions that create a striking contrast to the sunny warm conditions typically found less than a few kilometers inland. Airline passengers delayed by fog impatiently wait for the skies to clear. Residents get used to the Sun “rising” in midday after fog dissipates.

Monitoring the change of coastal zones from space

Science.gov (United States)

Cazenave, A. A.; Le Cozannet, G.; Benveniste, J.; Woodworth, P. L.

2017-12-01

The world's coastal zones, where an important fraction of the world population is currently living, are under serious threat because of coastal erosion, cyclones, storms, and salinization of estuaries and coastal aquifers. In the future, these hazards are expected to increase due to the combined effects of sea level rise, climate change, human activities and population increase. The response of coastal environments to natural and anthropogenic forcing factors (including climate change) depends on the characteristics of the forcing agents, as well as on the internal properties of the coastal systems, that remain poorly known and mostly un-surveyed at global scale. To better understand changes affecting coastal zones and to provide useful information to decision makers, various types of observations with global coverage need to be collected and analysed. Observations from space appear as an important complement to existing in situ observing systems (e.g., regional tide gauge networks). In this presentation, we discuss the benefit of systematic coastal monitoring from space, addressing both observations of forcing agents and of the coastal response. We highlight the need for a global coastal sea level data set based on retracked nadir altimetry missions and new SAR technology.

Infiltration of stormwater from highway operations to reduce coastal pollution.

Science.gov (United States)

2012-12-01

The coastal waters of Hawaii are extremely important for recreation as well as for the health of : the marine environment. Runoff from the construction and operation of highways can be a : source of pollution to coastal waters. Individual states in t...

Research on high-efficiency polishing technology of photomask substrate

Science.gov (United States)

Zhao, Shijie; Xie, Ruiqing; Zhou, Lian; Liao, Defeng; Chen, Xianhua; Wang, Jian

2018-03-01

A method of photomask substrate fabrication is demonstrated ,that the surface figure and roughness of fused silica will converge to target precision rapidly with the full aperture polishing. Surface figure of optical flats in full aperture polishing processes is primarily dependent on the surface profile of polishing pad, therefor, a improved function of polishing mechanism was put forward based on two axis lapping machine and technology experience, and the pad testing based on displacement sensor and the active conditioning method of the pad is applied in this research. Moreover , the clamping deformation of the thin glass is solved by the new pitch dispensing method. The experimental results show that the surface figure of the 152mm×152mm×6.35mm optical glass is 0.25λ(λ=633nm) and the roughness is 0.32nm ,which has meet the requirements of mask substrate for 90 45nm nodes.

Forming a health culture of future teachers in Polish educational establishments

Directory of Open Access Journals (Sweden)

T.S. IERMAKOVA

2014-10-01

Full Text Available Aim: to study the experience of the structure and system of training of future teachers in Polish schools. Material: content analysis of domestic and foreign authors. Used data from the survey of students of Polish universities. Also were used survey results through polish service ANKIETKA. For comparison, a questionnaire survey 35 students of the Faculty of Physical Education (future teachers of physical training and 30 students - the future teachers of elementary school of Ukrainian university. Results: the study of Polish teachers consider health culture of a person as the ability to assess individual and community health needs using in everyday life hygiene and health regulations. There have been some differences among Ukrainian and Polish students in their health and health culture. Among the respondents, Polish students - the future teachers of physical culture, is dominated motives such as the improvement of the physical condition, strengthen self-esteem, as well as improved health. Polish students from other disciplines believe that the most important motive for the adoption of physical activity is a concern for the physical well-being and mental health. The majority of Ukrainian students (future teachers of physical culture believe an important part of building health culture of their direct participation in various sports clubs, as well as the ability to organize physical culture, sports and educational work with students outside the classroom. Ukrainian students (other specialty noted the need to improve health, enhance knowledge in specific subjects humanities and promoting healthy lifestyles. Conclusions: It is recommended to use the experience of preparing students of Polish schools in modern Ukrainian higher education.

Confocal Raman spectrocopy for the analysis of nail polish evidence.

Science.gov (United States)

López-López, Maria; Vaz, Joana; García-Ruiz, Carmen

2015-06-01

Nail polishes are cosmetic paints that may be susceptible of forensic analysis offering useful information to assist in a crime reconstruction. Although the nail polish appearance could allow a quick visual identification of the sample, this analysis is subjected to the perception and subjective interpretation of the forensic examiner. The chemical analysis of the nail polishes offers great deal of information not subjected to analyst interpretation. Confocal Raman spectroscopy is a well-suited technique for the analysis of paints due to its non-invasive and non-destructive nature and its ability to supply information about the organic and inorganic components of the sample. In this work, 77 regular and gel nail polishes were analyzed with confocal Raman spectroscopy using two laser wavelengths (532 and 780 nm). The sample behavior under the two laser wavelengths and the differences in the spectra taken at different points of the sample were studied for each nail polish. Additionally, the spectra obtained for all the nail polishes were visually compared. The results concluded that the longer laser wavelength prevents sample burning and fluorescence effects; the similarity among the spectra collected within the sample is not directly related with the presence of glitter particles; and 64% of the samples analyzed showed a characteristic spectrum. Additionally, the use of confocal Raman spectroscopy for the forensic analysis of nail polishes evidence in the form of flakes or smudges on different surfaces were studied. The results showed that both types of evidence can be analyzed by the technique. Also, two non-invasive sampling methods for the collection of the evidence from the nails of the suspect or the victim were proposed: (i) to use acetone-soaked cotton swabs to remove the nail varnishes and (ii) to scrape the nail polish from the nail with a blade. Both approaches, each exhibiting advantages and drawbacks in terms of transport and handling were appropriate

Novel ceria-polymer microcomposites for chemical mechanical polishing

International Nuclear Information System (INIS)

Coutinho, Cecil A.; Mudhivarthi, Subrahmanya R.; Kumar, Ashok; Gupta, Vinay K.

2008-01-01

Abrasive particles are key components in slurries for chemical mechanical polishing (CMP). Since the particle characteristics determine surface quality of wafers during polishing, in this research, novel abrasive composite particles have been developed. These composite particles contain nanoparticles of ceria dispersed within cross-linked, polymeric microspheres such that the average mass fraction of ceria is approximately 50% in the particles. The microspheres are formed by co-polymerization of N-isopropylacrylamide (NIPAM) with 3-(trimethoxysilyl)propyl methacrylate (MPS) and contain interpenetrating (IP) chains of poly(acrylic acid) (PAAc). Infrared spectroscopy, dynamic light scattering, and transmission electron microscopy are employed to characterize the composite particles. Planarization of silicon dioxide wafers is studied on a bench-top CMP tester and the polished surfaces are characterized by ellipsometry, atomic force and optical microscopy. Slurries formed from the composite ceria-polymer particles lead to lower topographical variations and surface roughness than slurries of only ceria nanoparticles even though both slurries achieve similar removal rates of ∼100 nm/min for similar ceria content. Polishing with the novel composite particles gives surfaces devoid of scratches and particle deposition, which makes these particles suitable for the next generation slurries in CMP

Novel ceria-polymer microcomposites for chemical mechanical polishing

Energy Technology Data Exchange (ETDEWEB)

Coutinho, Cecil A. [Department of Chemical and Biomedical Engineering, University of South Florida (United States); Mudhivarthi, Subrahmanya R.; Kumar, Ashok [Nanomaterials and Nanomanufacturing Research Center, University of South Florida (United States); Department of Mechanical Engineering, University of South Florida (United States); Gupta, Vinay K. [Department of Chemical and Biomedical Engineering, University of South Florida (United States)], E-mail: vkgupta@eng.usf.edu

2008-12-30

Abrasive particles are key components in slurries for chemical mechanical polishing (CMP). Since the particle characteristics determine surface quality of wafers during polishing, in this research, novel abrasive composite particles have been developed. These composite particles contain nanoparticles of ceria dispersed within cross-linked, polymeric microspheres such that the average mass fraction of ceria is approximately 50% in the particles. The microspheres are formed by co-polymerization of N-isopropylacrylamide (NIPAM) with 3-(trimethoxysilyl)propyl methacrylate (MPS) and contain interpenetrating (IP) chains of poly(acrylic acid) (PAAc). Infrared spectroscopy, dynamic light scattering, and transmission electron microscopy are employed to characterize the composite particles. Planarization of silicon dioxide wafers is studied on a bench-top CMP tester and the polished surfaces are characterized by ellipsometry, atomic force and optical microscopy. Slurries formed from the composite ceria-polymer particles lead to lower topographical variations and surface roughness than slurries of only ceria nanoparticles even though both slurries achieve similar removal rates of {approx}100 nm/min for similar ceria content. Polishing with the novel composite particles gives surfaces devoid of scratches and particle deposition, which makes these particles suitable for the next generation slurries in CMP.

New technology and tool prepared for communication against storm surges.

Science.gov (United States)

Letkiewicz, Beata

2010-05-01

The aim of the presentation is description of the new technology and tool prepared for communication, information and issue of warnings against storm surges. The Maritime Branch of the Institute of Meteorology and Water Management is responsible for preparing the forecast as warning, where the end users are Government Officials and Public. The Maritime Branch carry out the project "Strengthening the administrative capacity in order to improve the management of Polish coastal zone environment" (supported by a grant from Norway through the Norwegian Financial Mechanism). The expected final result of the project is web site www.baltyk.pogodynka.pl. One of the activities of the project is - set up of information website www.baltyk.pogodynka.pl, giving public access to the complied data. Information on web site: - meta data - marine data (on-line measurement: sea level, water temperature, salinity, oxygen concentration); - data bases of mathematical model outputs - forecast data (sea level, currents); - ice conditions of the Baltic Sea, - instructions, information materials with information of polish coastal zone. The aim of set up of the portal is development of communication between users of the system, exchange of the knowledge of marine environment and natural hazards such as storm surges, improving the ability of the region in the scope of the data management about the sea environment and the coastal zone.

Jewish problem in the Polish Communist Party

Directory of Open Access Journals (Sweden)

Cimek Henryk

2016-12-01

Full Text Available Jews accounted for approx. 8-10% of the population of the Second Republic and in the communist movement (Polish Communist Party and Polish Communist Youth Union the rate was approx, 30%, while in subsequent years it much fluctuated. The percentage of Jews was the highest in the authorities of the party and in the KZMP. This had a negative impact on the position of the KPP on many issues, especially in its relation to the Second Republic.

Researchers focus attention on coastal response to climate change

Science.gov (United States)

Anderson, John; Rodriguez, Antonio; Fletcher, Charles; Fitzgerald, Duncan

The world's population has been steadily migrating toward coastal cities, resulting in severe stress on coastal environments. But the most severe human impact on coastal regions may lie ahead as the rate of global sea-level rise accelerates and the impacts of global warming on coastal climates and oceanographic dynamics increase [Varekamp and Thomas, 1998; Hinrichsen, 1999; Goodwin et al., 2000]. Little is currently being done to forecast the impact of global climate change on coasts during the next century and beyond. Indeed, there are still many politicians, and even some scientists, who doubt that global change is a real threat to society.

Dispersal patterns, active behaviour, and flow environment during early life history of coastal cold water fishes.

Directory of Open Access Journals (Sweden)

Ryan Stanley

Full Text Available During the pelagic larval phase, fish dispersal may be influenced passively by surface currents or actively determined by swimming behaviour. In situ observations of larval swimming are few given the constraints of field sampling. Active behaviour is therefore often inferred from spatial patterns in the field, laboratory studies, or hydrodynamic theory, but rarely are these approaches considered in concert. Ichthyoplankton survey data collected during 2004 and 2006 from coastal Newfoundland show that changes in spatial heterogeneity for multiple species do not conform to predictions based on passive transport. We evaluated the interaction of individual larvae with their environment by calculating Reynolds number as a function of ontogeny. Typically, larvae hatch into a viscous environment in which swimming is inefficient, and later grow into more efficient intermediate and inertial swimming environments. Swimming is therefore closely related to length, not only because of swimming capacity but also in how larvae experience viscosity. Six of eight species sampled demonstrated consistent changes in spatial patchiness and concomitant increases in spatial heterogeneity as they transitioned into more favourable hydrodynamic swimming environments, suggesting an active behavioural element to dispersal. We propose the tandem assessment of spatial heterogeneity and hydrodynamic environment as a potential approach to understand and predict the onset of ecologically significant swimming behaviour of larval fishes in the field.

Towards sustainable coexistence of aquaculture and fisheries in the coastal zone

DEFF Research Database (Denmark)

Bergh, Øjvind; Gomez, Emma Bello; Børsheim, Knut Yngve

2012-01-01

Globally, coastal areas are subject to an increase in competing activities. Coastal fisheries and aquaculture are highly dependent on availability and accessibility of appropriate sites. Aquaculture production is increasing, whereas fisheries are at best stagnant. Coastal activities also include ......, both industries represent human activities strongly influencing, and influenced by, the environment. Management of aquaculture and fisheries, as well as other uses of the coastal zone, should be considered integral parts with local variations in their respective importance.......Globally, coastal areas are subject to an increase in competing activities. Coastal fisheries and aquaculture are highly dependent on availability and accessibility of appropriate sites. Aquaculture production is increasing, whereas fisheries are at best stagnant. Coastal activities also include...

Borel hierarchies in infinite products of Polish spaces

Indian Academy of Sciences (India)

with two product topologies: (i) the product of copies of the Polish topology on X, so that H is again a Polish space and (ii) the product of copies of the discrete topology on X. Define now the Borel hierarchy in the larger topology on H. To do so, we need some notation. An element of H will be denoted by h = (x1,x2,...,xn,.

Introduction to the Special Issue: Coastal GIS

Directory of Open Access Journals (Sweden)

Timothy Nyerges

2014-09-01

Full Text Available This special issue of the ISPRS International Journal of Geographic Information about “Coastal GIS” is motivated by many circumstances. More than one-half of the world’s human population lives in coastal areas (within 200 kilometers of coast as of 2000 [1]. The trend toward coastal habitation is expected to continue in the US with the total being 75 percent by 2025, meaning that coastal human–environment interactions will likely increase and intensify [2]. Geographic information systems (GIS are being developed and used by technical specialists, stakeholder publics, and executive/policy decision makers for improving our understanding and management of coastal areas, separately and together as more organizations focus on improving the sustainability and resilience of coastal systems. Coastal systems—defined as the area of land closely connected to the sea, including barrier islands, wetlands, mudflats, beaches, estuaries, cities, towns, recreational areas, and maritime facilities, the continental seas and shelves, and the overlying atmosphere—are subject to complex and dynamic interactions among natural and human-driven processes. Coastal systems are crucial to regional and national economies, hosting valued human-built infrastructure and providing ecosystem services that sustain human well-being. This special issue of IJGI about coastal GIS presents a collection of nine papers that address many of the issues mentioned above. [...

Study of 210Po and 210Pb in the riverine environments of coastal Karnataka

International Nuclear Information System (INIS)

Narayana, Y.; Rajashekara, K.M.

2010-01-01

Activity of 210 Po and 210 Pb were measured in soil and sediment samples collected from the major rivers Kali, Sharavathi and Netravathi of Coastal Karnataka. The activity of these two radionuclides were determined by radiochemical separation of 210 Po and counting the activity using a ZnS(Ag) Alpha counter. The activity of 210 Pb was higher than that of 210 Po in the riverine environs. The 210 Po and 210 Pb content in sediment was found to increase with silt/clay and organic matter contents. However no significant correlation was found between the activity 210 Po and 210 Pb with pH in sediments. The activity of 210 Po and 210 Pb and influence of physico-chemical parameters on these radionuclides were studied and discussed in this paper.

Polishing Sapphire Substrates by 355 nm Ultraviolet Laser

Directory of Open Access Journals (Sweden)

X. Wei

2012-01-01

Full Text Available This paper tries to investigate a novel polishing technology with high efficiency and nice surface quality for sapphire crystal that has high hardness, wear resistance, and chemical stability. A Q-switched 355 nm ultraviolet laser with nanosecond pulses was set up and used to polish sapphire substrate in different conditions in this paper. Surface roughness Ra of polished sapphire was measured with surface profiler, and the surface topography was observed with scanning electronic microscope. The effects of processing parameters as laser energy, pulse repetition rate, scanning speed, incident angle, scanning patterns, and initial surface conditions on surface roughness were analyzed.

Materials of All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection; Materialy Krajowego Sympozjum Technika Jadrowa w Przemysle, Medycynie, Rolnictwie i Ochronie Srodowiska

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-07-01

The All-Polish Symposium Nuclear Techniques in Industry, Medicine, Agriculture and Environment Protection is cyclic (in 3 year period) conference being a broad review of state of art and development of all nuclear branches cooperated with industry and other branches of national economy and public life in Poland. The conference has been divided in one plenary session and 8 problem sessions as follow: Radiation technologies of flue gas purification; radiation technologies in food and cosmetic industry; application of nuclear techniques in environmental studies and earth science; radiometric methods in material engineering; isotope tracers in biological studies and medical diagnostics; radiometric industrial measuring systems; radiation detectors and device; nuclear methods in cultural objects examination. The poster section as well as small exhibition have been also organised.

Effect of One-Step and Multi-Steps Polishing System on Enamel Roughness

Directory of Open Access Journals (Sweden)

Cynthia Sumali

2013-07-01

Full Text Available Normal 0 false false false MicrosoftInternetExplorer4 The final procedures of orthodontic treatment are bracket debonding and cleaning the remaining adhesive. Multi-step polishing system is the most common method used. The disadvantage of that system is long working time, because of the stages that should be done. Therefore, dental material manufacturer make an improvement to the system, to reduce several stages into one stage only. This new system is known as one-step polishing system. Objective: To compare the effect of one-step and multi-step polishing system on enamel roughness after orthodontic bracket debonding. Methods: Randomized control trial was conducted included twenty-eight maxillary premolar randomized into two polishing system; one-step OptraPol (Ivoclar, Vivadent and multi-step AstroPol (Ivoclar, Vivadent. After bracket debonding, the remaining adhesive on each group was cleaned by subjective polishing system for ninety seconds using low speed handpiece. The enamel roughness was subjected to profilometer, registering two roughness parameters (Ra, Rz. Independent t-test was used to analyze the mean score of enamel roughness in each group. Results: There was no significant difference of enamel roughness between one-step and multi-step polishing system (p>0.005. Conclusion: One-step polishing system can produce a similar enamel roughness to multi-step polishing system after bracket debonding and adhesive cleaning.DOI: 10.14693/jdi.v19i3.136

IRST infrared background analysis of bay environments

CSIR Research Space (South Africa)

Schwering, PBW

2008-04-01

Full Text Available Present-day naval operations take place in coastal environments as well as narrow straits all over the world. Coastal environments around the world are exhibiting a number of threats to naval forces. In particular a large number of asymmetric...

The View of Lithuanian Statehood Held by the Polish Underground during 1939-1944

OpenAIRE

Bubnys, Arūnas

2006-01-01

The article investigates the attitudes of Polish underground actors towards the statehood of Lithuania, its territorial integrity, and Lithuanian-Polish relations during the World War II. The author draws the conclusion that Polish underground political structures expressed a hostile and prejudiced attitude towards Lithuania. All the blame and responsibility for bad mutual relations is put on Lithuania and Lithuanians. Polish underground actors living in Vilnija were extremely hostile towards...

Coastal terrorism: using tabletop discussions to enhance coastal community infrastructure through relationship building.

Science.gov (United States)

Richter, Jane; Livet, Melanie; Stewart, Jill; Feigley, Charles E; Scott, Geoff; Richter, Donna L

2005-11-01

The unique vulnerability of the nation's ports to terrorist attacks and other major disasters requires development of specialized training approaches that integrate and connect critical stakeholders. In 2003, the University of South Carolina Center for Public Health Preparedness developed and held its first Coastal Terrorism workshop in conjunction with the National Oceanic and Atmospheric Administration. Key federal, regional, state, and coastal agency leaders were invited to the 2-day event to explore, in a no-risk environment, the crucial role that public health agencies would play in a covert biological agent incident aboard a cruise ship. The incident began as a possible outbreak of a Norwalk-like viral agent; however, as the scenario unfolded, evidence of a terrorist plot emerged. This immediately shifted the scenario from a public health-dominated incident to one directed by law enforcement. Communication and coordination issues surfaced illustrating potential conflicts between disciplines and jurisdictions in terms of roles and responsibilities of responding agencies. The goals of the workshop were to facilitate communication and interagency networking among coastal stakeholders while assessing their training and research needs and increasing their familiarity with resources and protocols regarding a bioterrorist coastal event. Positive systems changes were observed.

Experimental Study on Layered Ice Bonded Abrasive Polishing of Glass-ceramics

Directory of Open Access Journals (Sweden)

Yuli SUN

2014-12-01

Full Text Available Layered ice bonded abrasive tools (LIBAT is a new kind of one which not only has the ability of lapping and polishing but also has the effect of self-dressing. In this paper, two kinds of layered ice bonded abrasive tools were designed and manufactured. Experimental studies on layered ice bonded abrasive (LIBA polishing of glass-ceramics were conducted. The results show that the surface topography of glass-ceramics polished by micro α-Al2O3-nano α-Al2O3 LIBAT is better than that of polished by micro α-Al2O3-nano SiO2 LIBAT. The surface roughness Sa of glass-ceramics polished by the two kinds of LIBAT is at the nanometer scale. The reasons of this phenomenon were analyzed. The experimental results illustrate that the LIBAT shows good effect and can be used in production practice. DOI: http://dx.doi.org/10.5755/j01.ms.20.4.6149

Energy savings in Polish buildings

Energy Technology Data Exchange (ETDEWEB)

Markel, L.C.; Gula, A.; Reeves, G.

1995-12-31

A demonstration of low-cost insulation and weatherization techniques was a part of phase 1 of the Krakow Clean Fossil Fuels and Energy Efficient Project. The objectives were to identify a cost-effective set of measures to reduce energy used for space heating, determine how much energy could be saved, and foster widespread implementation of those measures. The demonstration project focused on 4 11-story buildings in a Krakow housing cooperative. Energy savings of over 20% were obtained. Most important, the procedures and materials implemented in the demonstration project have been adapted to Polish conditions and applied to other housing cooperatives, schools, and hospitals. Additional projects are being planned, in Krakow and other cities, under the direction of FEWE-Krakow, the Polish Energie Cities Network, and Biuro Rozwoju Krakowa.

Coastal Modelling Environment version 1.0: a framework for integrating landform-specific component models in order to simulate decadal to centennial morphological changes on complex coasts

Directory of Open Access Journals (Sweden)

A. Payo

2017-07-01

Full Text Available The ability to model morphological changes on complex, multi-landform coasts over decadal to centennial timescales is essential for sustainable coastal management worldwide. One approach involves coupling of landform-specific simulation models (e.g. cliffs, beaches, dunes and estuaries that have been independently developed. An alternative, novel approach explored in this paper is to capture the essential characteristics of the landform-specific models using a common spatial representation within an appropriate software framework. This avoid the problems that result from the model-coupling approach due to between-model differences in the conceptualizations of geometries, volumes and locations of sediment. In the proposed framework, the Coastal Modelling Environment (CoastalME, change in coastal morphology is represented by means of dynamically linked raster and geometrical objects. A grid of raster cells provides the data structure for representing quasi-3-D spatial heterogeneity and sediment conservation. Other geometrical objects (lines, areas and volumes that are consistent with, and derived from, the raster structure represent a library of coastal elements (e.g. shoreline, beach profiles and estuary volumes as required by different landform-specific models. As a proof-of-concept, we illustrate the capabilities of an initial version of CoastalME by integrating a cliff–beach model and two wave propagation approaches. We verify that CoastalME can reproduce behaviours of the component landform-specific models. Additionally, the integration of these component models within the CoastalME framework reveals behaviours that emerge from the interaction of landforms, which have not previously been captured, such as the influence of the regional bathymetry on the local alongshore sediment-transport gradient and the effect on coastal change on an undefended coastal segment and on sediment bypassing of coastal structures.

Nd:YOV4 laser polishing on WC-Co HVOF coating

Science.gov (United States)

Giorleo, L.; Ceretti, E.; Montesano, L.; La Vecchia, G. M.

2017-10-01

WC/Co coatings are widely applied to different types of components due to their extraordinary performance properties including high hardness and wear properties. In industrial applications High Velocity Oxy-Fuel (HVOF) technique is extensively used to deposit hard metal coatings. The main advantage of HVOF compared to other thermal spray techniques is the ability to accelerate the melted powder particles of the feedstock material at a relatively high velocity, leading to obtain good adhesion and low porosity level. However, despite the mentioned benefits, the surface finish quality of WC-Co HVOF coatings results to be poor (Ra higher than 5 µm) thus a mechanical polishing process is often needed. The main problem is that the high hardness of coating leads the polishing process expensive in terms of time and tool wear; moreover polishing becomes difficult and not always possible in case of limited accessibility of a part, micro dimensions or undercuts. Nowadays a different technique available to improve surface roughness is the laser polishing process. The polishing principle is based on focused radiation of a laser beam that melts a microscopic layer of surface material. Compared to conventional polishing process (as grinding) it ensures the possibility of avoiding tool wear, less pollution (no abrasive or liquids), no debris, less machining time and coupled with a galvo system it results to be more suitable in case of 3D complex workpieces. In this paper laser polishing process executed with a Nd:YOV4 Laser was investigated: the effect of different process parameters as initial coating morphology, laser scan speed and loop cycles were tested. Results were compared by a statistical approach in terms of average roughness along with a morphological analysis carried out by Scanning Electron Microscope (SEM) investigation coupled with EDS spectra.

Assessment of groundwater vulnerability in the coastal region of Oman using DRASTIC index method in GIS environment.

Science.gov (United States)

Jamrah, Ahmad; Al-Futaisi, Ahmed; Rajmohan, Natarajan; Al-Yaroubi, Saif

2008-12-01

A study was carried out to develop a vulnerability map for Barka region in the North Batina of Oman using DRASTIC vulnerability index method in GIS environment. DRASTIC layers were created using data from published reports and the seven DRASTIC layers were processed by the ArcGIS geographic information system. Finally, DRASTIC maps were created for 1995 and 2004 to understand the long-term changes in the vulnerability index. DRASTIC vulnerability maps were evaluated using groundwater quality data such as chemical and biological parameters. DRASTIC vulnerability maps of 1995 and 2004 indicate that the northern part of Barka is more vulnerable to pollution than southern part and the central part of Barka also shows high relative vulnerability which is mostly related to the high conductivity values. Moreover, the changes in water level due to high abstraction rate of groundwater reflect in the vulnerability maps and low vulnerability area is increased in the southern part during 2004 compared to 1995. Moreover, regional distribution maps of nitrate, chloride and total and fecal coliforms are well correlated with DRASTIC vulnerability maps. In contrast to this, even though DRASTIC method predicted the central part of the study region is highly vulnerable, both chemical and biological parameters show lower concentrations in this region compared to coastal belt, which is mainly due to agricultural and urban development. In Barka, urban development and agricultural activities are very high in coastal region compared to southern and central part of the study area. Hence, this study concluded that DRASTIC method is also applicable in coastal region having ubiquitous contamination sources.

Experimental Study on Abrasive Waterjet Polishing of Hydraulic Turbine Blades

International Nuclear Information System (INIS)

Khakpour, H; Birglenl, L; Tahan, A; Paquet, F

2014-01-01

In this paper, an experimental investigation is implemented on the abrasive waterjet polishing technique to evaluate its capability in polishing of surfaces and edges of hydraulic turbine blades. For this, the properties of this method are studied and the main parameters affecting its performance are determined. Then, an experimental test-rig is designed, manufactured and tested to be used in this study. This test-rig can be used to polish linear and planar areas on the surface of the desired workpieces. Considering the number of parameters and their levels, the Taguchi method is used to design the preliminary experiments. All experiments are then implemented according to the Taguchi L 18 orthogonal array. The signal-to-noise ratios obtained from the results of these experiments are used to determine the importance of the controlled polishing parameters on the final quality of the polished surface. The evaluations on these ratios reveal that the nozzle angle and the nozzle diameter have the most important impact on the results. The outcomes of these experiments can be used as a basis to design a more precise set of experiments in which the optimal values of each parameter can be estimated

Wind direction dependent vertical wind shear and surface roughness parameter in two different coastal environments

International Nuclear Information System (INIS)

Bagavathsingh, A.; Srinivas, C.V.; Baskaran, R.; Venkatraman, B.; Sardar Maran, P.

2016-01-01

Atmospheric boundary layer parameters and surface layer parameterizations are important prerequisites for air pollution dispersion analysis. The turbulent flow characteristics vary at coastal and inland sites where the nuclear facilities are situated. Many pollution sources and their dispersion occur within the roughness sub layer in the lower atmosphere. In this study analysis of wind direction dependence vertical wind shear, surface roughness lengths and surface layer wind condition has been carried out at a coastal and the urban coastal site for the different wind flow regime. The differential response of the near coastal and inland urban site SBL parameters (wind shear, roughness length, etc) was examined as a function of wind direction

In the Eye of the Storm: A Participatory Course on Coastal Storms

Science.gov (United States)

Curtis, Scott

2013-01-01

Storm disasters are amplified in the coastal environment due to population pressures and the power of the sea. The upper-division/graduate university course "Coastal Storms" was designed to equip future practitioners with the skills necessary to understand, respond to, and mitigate for these natural disasters. To accomplish this, "Coastal Storms"…

Benthic Foraminifera as bio-indicators of anthropogenic impacts in coastal environments: Acqua dei Corsari area case study (Palermo, Italy).

Science.gov (United States)

Musco, Marianna; Cuttitta, Angela; Bicchi, Erica; Quinci, Enza Maria; Sprovieri, Mario; Tranchida, Giorgio; Giaramita, Luigi; Traina, Anna; Salvagio Manta, Daniela; Gherardi, Serena; Mercurio, Pietro; Siragusa, Angelo; Mazzola, Salvatore

2017-04-15

This study investigates living benthic foraminiferal assemblages as bio-indicators of anthropogenic activities in a coastal area within the Gulf of Palermo (Sicily, Italy), affected by industrial and urban activities, and evaluates the environmental quality through the calibration of a Tolerant Species index (%TS std ). Sediments from 6 stations were sampled along a bathymetric transect from the coast to offshore. Sediment grain size, TOC, major, minor and trace elements and polycyclic aromatic hydrocarbons (PAHs) were compared to benthic foraminiferal assemblages and species at each station. Diversity and density of benthic foraminiferal assemblages were not affected by the presence of pollutants, while tolerant species increased with organic (TOC and PAHs) or chemical (As and Pb) concentrations. Moreover, the calibration of the %TS std formula to >125μm foraminiferal assemblage, gives a detailed description of environmental quality along the transect, representing a good and sensitive tool to evaluate marine coastal environment. Copyright © 2017 Elsevier Ltd. All rights reserved.

Calculation and simulation on mid-spatial frequency error in continuous polishing

International Nuclear Information System (INIS)

Xie Lei; Zhang Yunfan; You Yunfeng; Ma Ping; Liu Yibin; Yan Dingyao

2013-01-01

Based on theoretical model of continuous polishing, the influence of processing parameters on the polishing result was discussed. Possible causes of mid-spatial frequency error in the process were analyzed. The simulation results demonstrated that the low spatial frequency error was mainly caused by large rotating ratio. The mid-spatial frequency error would decrease as the low spatial frequency error became lower. The regular groove shape was the primary reason of the mid-spatial frequency error. When irregular and fitful grooves were adopted, the mid-spatial frequency error could be lessened. Moreover, the workpiece swing could make the polishing process more uniform and reduce the mid-spatial frequency error caused by the fix-eccentric plane polishing. (authors)

Application of the Coastal Hazard Wheel methodology for coastal multi-hazard assessment and management in the state of Djibouti

DEFF Research Database (Denmark)

Appelquist, Lars Rosendahl; Balstrøm, Thomas

2014-01-01

coastal classification system that incorporates the main static and dynamic parameters determining the characteristics of a coastal environment. The methodology provides information on the hazards of ecosystem disruption, gradual inundation, salt water intrusion, erosion and flooding and can be used...... to support management decisions at local, regional and national level, in areas with limited access to geophysical data. The assessment for Djibouti applies a geographic information system (GIS) to develop a range of national hazard maps along with relevant hazard statistics and is showcasing the procedure......This paper presents the application of a new methodology for coastal multi-hazard assessment and management in a changing global climate on the state of Djibouti. The methodology termed the Coastal Hazard Wheel (CHW) is developed for worldwide application and is based on a specially designed...

Socializing the coast: Engaging the social science of tropical coastal research

Science.gov (United States)

Spalding, Ana K.; Biedenweg, Kelly

2017-03-01

The broad scale and rapid rate of change in the global environment is causing some of the world's most challenging problems, such as habitat degradation, loss of biodiversity, and food insecurity. These problems are especially pressing in coastal environments in the tropics, resulting in significant impacts on human wellbeing and ecological systems across the globe. The underlying causes of marine and coastal environmental change are both anthropogenic and natural; and, while it is difficult to parse out causal linkages as either exclusively human or naturally occurring, feedbacks between drivers only exacerbate the issues. Increasingly, scholars are turning to integrated research efforts, whereby multiple disciplines are used to answer pressing questions about and find solutions for the sustainability of human life and natural ecosystems across the coastal tropics. This article leverages the recent wave of interdisciplinary research to explore the various ways in which the social sciences have successfully contributed to a more complete understanding of coastal systems across the tropics. It also identifies opportunities for research that move beyond single disciplinary approaches to coastal science. The concluding discussion suggests social science knowledge areas that are underutilized in coastal research and provides suggestions for increasing the incorporation of social science in coastal research programs.

Metagenomic Analysis of Subtidal Sediments from Polar and Subpolar Coastal Environments Highlights the Relevance of Anaerobic Hydrocarbon Degradation Processes

Energy Technology Data Exchange (ETDEWEB)

Espinola, Fernando J.; Dionisi, Hebe M.; Borglin, Sharon; Brislawn, Colin J.; Jansson, Janet K.; Mac Cormack, Walter P.; Carroll, Jolynn; Sjoling, Sara; Lozada , Mariana

2018-01-02

In this work, we analyzed the community structure and metabolic potential of sediment microbial communities in high-latitude coastal environments subjected to low to moderate levels of chronic pollution. Subtidal sediments from four low-energy inlets located in polar and subpolar regions from both Hemispheres were analyzed using large-scale 16S rRNA gene and metagenomic sequencing. Communities showed high diversity (Shannon’s index 6.8 to 10.2), with distinct phylogenetic structures (<40% shared taxa at the Phylum level among regions) but similar metabolic potential in terms of sequences assigned to KOs. Environmental factors (mainly salinity, temperature, and in less extent organic pollution) were drivers of both phylogenetic and functional traits. Bacterial taxa correlating with hydrocarbon pollution included families of anaerobic or facultative anaerobic lifestyle, such as Desulfuromonadaceae, Geobacteraceae, and Rhodocyclaceae. In accordance, biomarker genes for anaerobic hydrocarbon degradation (bamA, ebdA, bcrA, and bssA) were prevalent, only outnumbered by alkB, and their sequences were taxonomically binned to the same bacterial groups. BssA-assigned metagenomic sequences showed an extremely wide diversity distributed all along the phylogeny known for this gene, including bssA sensu stricto, nmsA, assA, and other clusters from poorly or not yet described variants. This work increases our understanding of microbial community patterns in cold coastal sediments, and highlights the relevance of anaerobic hydrocarbon degradation processes in subtidal environments.

Study on the cumulative impact of reclamation activities on ecosystem health in coastal waters.

Science.gov (United States)

Shen, Chengcheng; Shi, Honghua; Zheng, Wei; Li, Fen; Peng, Shitao; Ding, Dewen

2016-02-15

The purpose of this study is to develop feasible tools to investigate the cumulative impact of reclamations on coastal ecosystem health, so that the strategies of ecosystem-based management can be applied in the coastal zone. An indicator system and model were proposed to assess the cumulative impact synthetically. Two coastal water bodies, namely Laizhou Bay (LZB) and Tianjin coastal waters (TCW), in the Bohai Sea of China were studied and compared, each in a different phase of reclamations. Case studies showed that the indicator scores of coastal ecosystem health in LZB and TCW were 0.75 and 0.68 out of 1.0, respectively. It can be concluded that coastal reclamations have a historically cumulative effect on benthic environment, whose degree is larger than that on aquatic environment. The ecosystem-based management of coastal reclamations should emphasize the spatially and industrially intensive layout. Copyright © 2015 Elsevier Ltd. All rights reserved.

Surface morphology changes of acrylic resins during finishing and polishing phases

Directory of Open Access Journals (Sweden)

Glaucio Serra

2013-12-01

Full Text Available INTRODUCTION: The finishing and polishing phases are essential to improve smoothness and shining on the surface of acrylic resins used to make removable orthodontic appliances. A good surface finishing reduces roughness, which facilitates hygiene, prevents staining and provides greater comfort to the patients. OBJECTIVE: The aim of this paper was to analyze the changes on surface morphology of acrylic resins during finishing and polishing phases. METHODS: Thirty discs (10 mm in diameter and 5 mm in length were made with acrylic resin and randomly divided into ten groups. The control group did not receive any treatment while the other groups received gradual finishing and polishing. The last group received the entire finishing and polishing procedures. Surface morphology was qualitatively analyzed through scanning electron microscopy and quantitatively analyzed through a laser profilometer test. RESULTS: The acrylic resin surfaces without treatment showed bubbles which were not observed in the subsequent phases. Wearing out with multilaminated burs, finishing with wood sandpaper and finishing with water sandpaper resulted in surfaces with decreasing irregularities. The surfaces that were polished with pumice and with low abrasive liquids showed high superficial smoothness. CONCLUSION: Highly smooth acrylic resin surfaces can be obtained after mechanical finishing and polishing performed with multilaminated burs, wood sandpaper, water sandpaper, pumice and low abrasive liquids.

Coastal Morphology and Coastal Protection

NARCIS (Netherlands)

Van de Graaff, J.

2009-01-01

Lecture notes ct5309. Tides, currents and water; coastal problems; sediment transport processes; coastal transport modes; longshore transport; cross-shore transport; fundamentals of mud; channels and trenches; coastal protection; application of structures; application of nourishments.

Implementation of the Bulgarian-Polish online dictionary

Directory of Open Access Journals (Sweden)

Ludmila Dimitrova

2015-11-01

Full Text Available Implementation of the Bulgarian-Polish online dictionary The paper describes the implementation of an online Bulgarian-Polish dictionary as a technological tool for applications in digital humanities. This bilingual digital dictionary is developed in the frame of the joint research project “Semantics and Contrastive Linguistics with a focus on a bilingual electronic dictionary” between IMI-BAS and ISS-PAS, supervised by L. Dimitrova (IMI-BAS and V. Koseska-Toszewa (ISS-PAS. In addition, the main software tools for web-presentation of the dictionary are described briefly.

Lay beliefs on Polish oncology in the evaluation of healthy individuals.

Science.gov (United States)

Synowiec-Piłat, Małgorzata

2017-12-23

Poland is among the countries which reported the highest rates of mortality from cancer. The health behaviours of people are influenced, among other things, by their beliefs about cancer, but their evaluation of oncological institutions and specialists seems also to be of great importance. Objectives. 1. How the respondents evaluate Polish oncology: a) the conditions of treatment in oncology hospitals, b) access to oncological medical services, c) the competence of oncologists. 2. What are the socio-cultural factors of the assessment of Polish oncology? 3. What is the influence of the grade level of the assessment of Polish oncology on the degree of fear and the knowledge about cancer? The study was carried out with a sample of 910 adult residents of Wroclaw in south-west Poland. Quota sampling was used. An interview questionnaire was used as the method. Analysis of the data showed a negative image of Polish oncology, according to the study participants: dissatisfaction with both treatment conditions and with access to medical services. Assessment of Polish oncology depends primarily on education, age and economic situation, as well as 'family history of cancer', and attitude towards doctors. The lower the rating of Polish oncology, the lower the medical knowledge, and the higher the level of fear of cancer. Negative assessment of Polish oncology perpetuates the fear of cancer in society. There is a need for constant improvement of the quality of medical oncology services, for building public trust in physicians, to fight inequalities in health, and to take into account the lay perspectives in developing strategies to combat cancer.

The Profile of a Polish Mutual Fund Manager

Directory of Open Access Journals (Sweden)

Dariusz Filip

2018-05-01

Full Text Available Aim/purpose - The purpose of this paper is to identify the characteristics that are typical of mutual fund managers. Design/methodology/approach - The study concentrates on a set of socio-demographic data, such as: age, gender, education, experience, and professional qualifications of 336 portfolio managers. The applied research strategy relies on an analysis concerning a set of statistical metrics describing the population under examination. Findings - The average Polish fund manager is a 37-year-old man, a holder of a stock-broker or investment adviser license. He obtained the authorization from the Polish Financial Supervision Authority (KNF a few years after graduating from the Warsaw School of Economics (SGH. He has 11 years' experience in financial markets and 7 years' experience in the mutual fund industry. Research implications/limitations - The identification of managerial characteristics for the purpose of creating a profile of a Polish mutual fund manager will provide an important basis for further surveys and analyses aimed to evaluate the effectiveness of mutual funds. Originality/value/contribution - There are no investigations within the discussed area in Polish studies. Therefore, the identification of the characteristics that are typical of mutual fund managers will make a contribution to the finance literature.(original abstract

Rights and obligations of communal enterprises under Polish administrative law

International Nuclear Information System (INIS)

Filipek, J.

1992-01-01

The paper elucidates the legal environment in which Polish power producing and distributing enterprises operate. In particular, the different forms of communal enterprises are described: public owned companies; public owned companies serving ''higher purposes''; communal enterprises operating on the strength of special laws; forms of organization subject to private law. Over the long term the rules in the sphere of the communal economy can be simplified. As the administrative judiciary develops, comprehensive administrative surveillance will become superfluous. The communal enterprises render their services to the citizen. The legal remedies at the citizen's disposal are the administrative complaint and the appeal to the administrative courts. (orig./HSCH) [de

Differentiating littering, urban runoff and marine transport as sources of marine debris in coastal and estuarine environments

Science.gov (United States)

Willis, Kathryn; Denise Hardesty, Britta; Kriwoken, Lorne; Wilcox, Chris

2017-03-01

Marine debris is a burgeoning global issue with economic, ecological and aesthetic impacts. While there are many studies now addressing this topic, the influence of urbanisation factors such as local population density, stormwater drains and roads on the distribution of coastal litter remains poorly understood. To address this knowledge gap, we carried out standardized surveys at 224 transect surveys at 67 sites in two estuaries and along the open coast in Tasmania, Australia. We explored the relative support for three hypotheses regarding the sources of the debris; direct deposition by beachgoers, transport from surrounding areas via storm water drains and coastal runoff, and onshore transport from the marine system. We found strong support for all three mechanisms, however, onshore transport from the marine reservoir was the most important mechanism. Overall, the three models together explained 45.8 percent of the variation in our observations. Our results also suggest that most debris released into the marine environment is deposited locally, which may be the answer to where all the missing plastic is in the ocean. Furthermore, local interventions are likely to be most effective in reducing land-based inputs into the ocean.

[Lysenkoism in Polish botany].

Science.gov (United States)

Köhler, Piotr

2008-01-01

Lysenkoism in Poland was never an autonomous phenomenon. The whole array of reasons for which it appeared in Polish science would require a separate study--here it only needs to be pointed out that the major reasons included terror on the part of the security service, lawlessness, the ubiquitous atmosphere of intimidation and terror, censorship, the diminishing sphere of civil liberties, political show trials, propaganda and denunciations. An important role in facilitating the introduction of Lysenkoism was played also by the reorganization of science after World War Two, the isolation of Polish science from science in the West, as well as the damage it had suffered during the war. At first, Lysenkoism was promoted in Poland by a small group of enthusiastic and uncritical proponents. A overview of the events connected with the ten years of Lysenkoism in Poland (end of 1948--beginning of 1958) shows a two-tier picture of how the 'idea' was propagated. The first tier consisted in the activities of the Association of Marxist Naturalists [Koło Przyrodników-Marksistów], which it engaged in since the end of 1948. The Association was later transformed into a Union of Marxist Naturalists, and this in turn merged, in 1952, with the Copernican Society of Polish Naturalists [Polskie Towarzystwo Przyrodników im. Kopernika]. It was that society which promoted Lysenkoism longest, until the end of 1956. The propaganda and training activities of the circle and the society prepared ground for analogous activities of the newly formed Polish Academy of Science (PAN), which--since its very establishment in 1952--engaged in promoting Lysenkoism through its Second Division. These activities were aimed at naturalists, initially at those who were prominent scientists (eg. the conference at Kuźnice, 1950/1951), and then at those who were only starting their academic career (including national courses in new biology at Dziwnów, 1952, or Kortowo, 1953 and 1955). The end to promoting

Condensate polishing guidelines for PWR and BWR plants

International Nuclear Information System (INIS)

Robbins, P.; Crinigan, P.; Graham, B.; Kohlmann, R.; Crosby, C.; Seager, J.; Bosold, R.; Gillen, J.; Kristensen, J.; McKeen, A.; Jones, V.; Sawochka, S.; Siegwarth, D.; Keeling, D.; Polidoroff, T.; Morgan, D.; Rickertsen, D.; Dyson, A.; Mills, W.; Coleman, L.

1993-03-01

Under EPRI sponsorship, an industry committee, similar in form and operation to other guideline committees, was created to develop Condensate Polishing Guidelines for both PWR and BWR systems. The committee reviewed the available utility and water treatment industry experience on system design and performance and incorporated operational and state-of-the-art information into document. These guidelines help utilities to optimize present condensate polisher designs as well as be a resource for retrofits or new construction. These guidelines present information that has not previously been presented in any consensus industry document. The committee generated guidelines that cover both deep bed and powdered resin systems as an integral part of the chemistry of PWR and BWR plants. The guidelines are separated into sections that deal with the basis for condensate polishing, system design, resin design and application, data management and performance and management responsibilities

The impact of coastal grabbing on community conservation – a global reconnaissance

OpenAIRE

Bavinck, Jan Maarten; Berkes, Fikret; Charles, Anthony; Dias, Ana Carolina Esteves; Doubleday, Nancy; Nayak, Prateep; Sowman, Merle

2017-01-01

Source at https://doi.org/10.1186/s40152-017-0062-8 . "Coastal grab" refers to the contested appropriation of coastal (shore and inshore) space and resources by outside interests. This paper explores the phenomenon of coastal grabbing and the effects of such appropriation on community-based conservation of local resources and environment. The approach combines social-ecological systems analysis with socio-legal property rights studies. Evidence of coastal grab is provided from four countr...

Mechanistic, kinetic, and processing aspects of tungsten chemical mechanical polishing

Science.gov (United States)

Stein, David

This dissertation presents an investigation into tungsten chemical mechanical polishing (CMP). CMP is the industrially predominant unit operation that removes excess tungsten after non-selective chemical vapor deposition (CVD) during sub-micron integrated circuit (IC) manufacture. This work explores the CMP process from process engineering and fundamental mechanistic perspectives. The process engineering study optimized an existing CMP process to address issues of polish pad and wafer carrier life. Polish rates, post-CMP metrology of patterned wafers, electrical test data, and synergy with a thermal endpoint technique were used to determine the optimal process. The oxidation rate of tungsten during CMP is significantly lower than the removal rate under identical conditions. Tungsten polished without inhibition during cathodic potentiostatic control. Hertzian indenter model calculations preclude colloids of the size used in tungsten CMP slurries from indenting the tungsten surface. AFM surface topography maps and TEM images of post-CMP tungsten do not show evidence of plow marks or intergranular fracture. Polish rate is dependent on potassium iodate concentration; process temperature is not. The colloid species significantly affects the polish rate and process temperature. Process temperature is not a predictor of polish rate. A process energy balance indicates that the process temperature is predominantly due to shaft work, and that any heat of reaction evolved during the CMP process is negligible. Friction and adhesion between alumina and tungsten were studied using modified AFM techniques. Friction was constant with potassium iodate concentration, but varied with applied pressure. This corroborates the results from the energy balance. Adhesion between the alumina and the tungsten was proportional to the potassium iodate concentration. A heuristic mechanism, which captures the relationship between polish rate, pressure, velocity, and slurry chemistry, is presented

Performance Indicator Framework for Evaluation of Sustainable Tourism in the Taiwan Coastal Zone

Directory of Open Access Journals (Sweden)

Shih-Hao Wang

2016-07-01

Full Text Available Surrounded by the ocean, Taiwan has been increasingly developing coastal tourism projects. Concerns that negative impacts might be brought about by prosperous tourism have resulted in a recent focus on sustainable tourism. Sustainable tourism involves policies that acknowledge the interdependences among the environment, the community, and the economy. The goal of sustainable tourism is to enhance and protect the environment while satisfying basic human requirements, as well as those of the contemporary and future tourism industries to improve quality of life. On the other hand, unsustainable coastal tourism might undermine the natural environment and society, resulting in air, water, and soil pollution, wildlife habitat disruption, and changes of local community cultural characteristics. Therefore, performance evaluation of coastal tourism, using an indicator framework to facilitate sustainable development and enhance the effectiveness of coastal resources exploitation, is critical. Through a literature review and expert surveys using the methods of the fuzzy Delphi method (FDM and the fuzzy analytic hierarchy process (FAHP, this study builds a performance indicator framework and identifies the key factors affecting the sustainable development of coastal tourism in Taiwan. The results can serve as a reference for the public sector to be used for the sustainable planning and development of coastal tourism.

75 FR 51838 - Public Review of Draft Coastal and Marine Ecological Classification Standard

Science.gov (United States)

2010-08-23

... Web site. DATES: Comments on the draft Coastal and Marine Ecological Classification Standard must be... marine and coastal environments of the United States. It was developed to provide a common language that... existing classification standards. The CMECS domain extends from the coastal tidal splash zone to the deep...

Chemical Mechanical Polishing of Ruthenium, Cobalt, and Black Diamond Films

Science.gov (United States)

Peethala, Brown Cornelius

Ta/TaN bilayer serves as the diffusion barrier as well as the adhesion promoter between Cu and the dielectric in 32 nm technology devices. A key concern of future technology devices (layer (vs. a bilayer of Ta/TaN) to act as a barrier. During patterning, they need to be planarized using conventional chemical mechanical polishing (CMP) to achieve a planar surface. However, CMP of these new barrier materials requires novel slurry compositions that provide adequate selectivity towards Cu and dielectric films, and minimize galvanic corrosion. Apart from the application as a barrier, Ru also has been proposed as a lower electrode material in metal-insulator-metal capacitors where high (> 50 nm/min) Ru removal rates (RRs) are required and as a stop layer in magnetic recording head fabrication where low (hydroxide (KOH). It was also determined that increased the ionic strength is not responsible for the observed increase in Ru removal rate. Benzotirazole (BTA) and ascorbic acid were added to the slurry to reduce the open circuit potential (Eoc) difference between Cu and Ru to ˜20 mV from about 550 mV in the absence of additives. A removal mechanism with KIO4 as the oxidizing agent is proposed based on the formation of several ruthenium oxides, some of which formed residues on the polishing pad below a pH of ˜7. Next, a colloidal silica-based slurry with hydrogen peroxide (H 2O2) as the oxidizer (1 wt%), and arginine (0.5 wt%) as the complexing agent was developed to polish Co at pH 10. The Eoc between Cu and Co at the above conditions was reduced to ˜20 mV compared to ˜250 mV in the absence of additives, suggestive of reduced galvanic corrosion during the Co polishing. The slurry also has the advantages of good post-polish surface quality at pH 10, and no dissolution rate. BTA at a concentration of 5mM in this slurry inhibited Cu dissolution rates and yielded a Cu/Co RR ratio of ˜0.8:1 while the open potential difference between Cu and Co was further reduced to ˜10

Wear characteristics of polished and glazed lithium disilicate ceramics opposed to three ceramic materials.

Science.gov (United States)

Saiki, Osamu; Koizumi, Hiroyasu; Akazawa, Nobutaka; Kodaira, Akihisa; Okamura, Kentaro; Matsumura, Hideo

2016-01-01

This study compared the wear characteristics of a heat-pressed lithium disilicate ceramic material opposed to feldspathic porcelain, a lithium disilicate glass ceramic, and zirconia materials. Ceramic plate specimens were prepared from feldspathic porcelain (EX-3 nA1B), lithium disilicate glass ceramics (e.max CAD MO1/C14), and zirconia (Katana KT 10) and then ground or polished. Rounded rod specimens were fabricated from heat-pressed lithium disilicate glass ceramic (e.max press LT A3) and then glazed or polished. A sliding wear testing apparatus was used for wear testing. Wear of glazed rods was greater than that of polished rods when they were abraded with ground zirconia, ground porcelain, polished porcelain, or polished lithium disilicate ceramics. For both glazed and polished rods, wear was greater when the rods were abraded with ground plates. The findings indicate that application of a polished surface rather than a glazed surface is recommended for single restorations made of heat-pressed lithium disilicate material. In addition, care must be taken when polishing opposing materials, especially those used in occlusal contact areas. (J Oral Sci 58, 117-123, 2016).

Microscopic machining mechanism of polishing based on vibrations of liquid

International Nuclear Information System (INIS)

Huang, Z G; Guo, Z N; Chen, X; Yu, Z Q; Yu, T M; Lee, W B

2007-01-01

A molecular dynamics method has been applied to study the mechanism of polishing based on vibrations of liquid. Movements of polishing particles and formations of impact dents are simulated and discussed. The abrasive effect between particle and machined substrate is evaluated empirically. Polishing qualities, including roughness and fractal character under multiple impacts, are obtained by numerical methods. Results show that the particle will vibrate and roll viscously on the substrate. Press, tear and self-organization effects will be responsible for the formation of impact dents. Simulation results are compared with experimental data to verify the conclusions

Human resources training in coastal science

Digital Repository Service at National Institute of Oceanography (India)

Vijayaraghavan, S.

The paper stresses the importance of training and education to the development and application of knowledge on the coastal marine environment and its resources. Present status of human resources training in India is discussed and changes...

Models of nanoparticles movement, collision, and friction in chemical mechanical polishing (CMP)

Energy Technology Data Exchange (ETDEWEB)

Ilie, Filip, E-mail: filip@meca.omtr.pub.ro [Polytechnic University of Bucharest, Department of Machine Elements and Tribology (Romania)

2012-03-15

Nanoparticles have been widely used in polishing slurry such as chemical mechanical polishing (CMP) process. The movement of nanoparticles in polishing slurry and the interaction between nanoparticles and solid surface are very important to obtain an atomic smooth surface in CMP process. Polishing slurry contains abrasive nanoparticles (with the size range of about 10-100 nm) and chemical reagents. Abrasive nanoparticles and hydrodynamic pressure are considered to cause the polishing effect. Nanoparticles behavior in the slurry with power-law viscosity shows great effect on the wafer surface in polishing process. CMP is now a standard process of integrated circuit manufacturing at nanoscale. Various models can dynamically predict the evolution of surface topography for any time point during CMP. To research, using a combination of individual nanoscale friction measurements for CMP of SiO{sub 2}, in an analytical model, to sum these effects, and the results scale CMP experiments, can guide the research and validate the model. CMP endpoint measurements, such as those from motor current traces, enable verification of model predictions, relating to friction and wear in CMP and surface topography evolution for different types of CMP processes and patterned chips. In this article, we explore models of the microscopic frictional force based on the surface topography and present both experimental and theoretical studies on the movement of nanoparticles in polishing slurry and collision between nanoparticles, as well as between the particles and solid surfaces in time of process CMP. Experimental results have proved that the nanoparticle size and slurry properties have great effects on the polishing results. The effects of the nanoparticle size and the slurry film thickness are also discussed.

Spatial variation in energy exchange across coastal environments in Greenland

Science.gov (United States)

Lund, M.; Abermann, J.; Citterio, M.; Hansen, B. U.; Larsen, S. H.; Stiegler, C.; Sørensen, L. L.; van As, D.

2015-12-01

The surface energy partitioning in Arctic terrestrial and marine areas is a crucial process, regulating snow, glacier ice and sea ice melt, and permafrost thaw, as well as modulating Earth's climate on both local, regional, and eventually, global scales. The Arctic region has warmed approximately twice as much as the global average, due to a number of feedback mechanisms related to energy partitioning, most importantly the snow and ice-albedo feedback. However, direct measurements of surface energy budgets in the Arctic are scarce, especially for the cold and dark winter period and over transects going from the ice sheet and glaciers to the sea. This study aims to describe annual cycles of the surface energy budget from various surface types in Arctic Greenland; e.g. glacier, snow, wet and dry tundra and sea ice, based on data from a number of measurement locations across coastal Greenland related to the Greenland Ecosystem Monitoring (GEM) program, including Station Nord/Kronprins Christians Land, Zackenberg/Daneborg, Disko, Qaanaq, Nuuk/Kobbefjord and Upernaviarsuk. Based on the available time series, we will analyze the sensitivity of the energy balance partitioning to variations in meteorological conditions (temperature, cloudiness, precipitation). Such analysis would allow for a quantification of the spatial variation in the energy exchange in aforementioned Arctic environments. Furthermore, this study will identify uncertainties and knowledge gaps in Arctic energy budgets and related climate feedback effects.

The mangrove tangle: short-term bio-physical interactions in coastal mangroves

NARCIS (Netherlands)

Horstman, Erik

2014-01-01

Mangroves are coastal wetland ecosystems in the upper intertidal area. Salt-tolerant mangrove vegetation dwells on fine substrates in sheltered, low-energy coastal environments such as estuaries and lagoons. At the interface between land and sea, mangroves provide a plethora of regulating, habitat

Evaluating Sea water Quality in the Coastal Zone of North Lebanon using Telemac-2DTM

International Nuclear Information System (INIS)

Awad, Mohamad; Darwich, T.

2009-01-01

The coastal zones of the Mediterranean are undergoing rapid development withgrowing and conflicting demands on the natural resources. Coastal zones are often subjected to irreversible land degradation and environmental deterioration. Lebanon is located in the eastern part of the Mediterranean basin and the integrated management of the environment in the Lebanese coastal zone must be given concern. Most of the successful decisions addressing the environment protection or the elaboration of preventive measures in the coastal zone. These decisions depend on the availability of efficient simulation tools. The existence of these tools can help protecting the environment and establishing the ground for sustainable natural resources in the coastal zones. In this paper, a simulation tool called Telemac-2D TM software was used to simulate the business as usual, pessimistic, and optimistic status of the sea water quality in the coastal zone of Tripoli (North Lebanon). The coastal zone is affected by the effluents of solid and liquid wastes from Abou-Ali river. The different quality states of the coastal zone represent the normal, high, and low flow of the effluents (plume pollutants) from Abou-Ali river. In addition, it represents the variation of different factors such as wind and sea currents speed and direction. This simulation will help the decision makers to implement pre-cautious measures before a disaster takes place by assessing the quality of the sea water near the coastal zones. (author)

Cultural Scripts and the Speech Act of Opinions in Irish English: A Study amongst Irish and Polish University Students

Directory of Open Access Journals (Sweden)

Weronika Gąsior

2015-06-01

Full Text Available Studies in pragmatics have been limited to a handful of illocutionary acts such as requests, apologies or compliments, and opinions remain underrepresented in the existing literature. In this paper I present the results of a study of opinions in Irish English, conducted in an intercultural environment of Irish-Polish interactions. Departing from a traditional approach of speech act realisation studies, I applied the theory of cultural scripts to analyse opinions. In contrasting the Irish and Polish formulas for expressing opinions, as well as sociopragmatic attitudes towards this speech act, a difference in the cultural scripts for opinions in each culture was observable. Apart from already documented Polish frankness in opinions, the study discovered also a rational approach to presenting good arguments to support one’s assertions among the participants. In relation to the Irish script for opinions, the findings are in line with previous classifications of opinions in Australian English, showing a certain level of variational uniformity amongst the English-speaking cultures in this regard.

Effects of air-polishing powders on color stability of composite resins.

Science.gov (United States)

Güler, Ahmet Umut; Duran, Ibrahim; Yücel, Ali Çağin; Ozkan, Pelin

2011-10-01

The purpose of this study was to investigate the effect of different air-polishing powders on the color stability of different types of composite resin restorative materials. Thirty cylindrical specimens (15×2 mm) were prepared for each of 7 composite resin restorative materials. All specimens were polished with a series of aluminum oxide polishing discs (Sof-Lex). The prepared specimens of each composite resin were randomly divided into 3 groups of 10 specimens each, for control (Group-C) and two air-powder applications (Group-CP: Cavitron Prophy-Jet; Group-PS: Sirona ProSmile prophylaxis powder). A standard air-polishing unit (ProSmile Handly) was used. All specimens were air-powdered for 10 s at 4-bar pressure. The distance of the spray nosel from the specimens was approximately 10 mm and angulation of the nosel was 90°. Specimens were stored in 100 mL of coffee (Nescafe Classic) for 24 h at 37°C. Color measurement of all specimens was recorded before and after exposure to staining agent with a colorimeter (Minolta CR-300). Color differences (∆E*) between the 2 color measurements (baseline and after 24 h storage) were calculated. The data were analyzed with a 2-way ANOVA test, and mean values were compared by the Tukey HSD test (p.05) and these groups demonstrated the highest ∆E* values. For Filtek Silorane and IntenS, the highest ∆E* values were observed in Group-PS. The lowest ∆E* values for all composite resin groups were observed in Group-C. When comparing the 7 composite resin restorative materials, Aelite Aesthetic Enemal demonstrated significantly less ∆E* values than the other composite resins tested. The highest ∆E* values were observed in Quixfil. Except for Quixfil, all control groups of composite resins that were polished Sof-Lex exhibited clinically acceptable ∆E values (<3.7). Air-polishing applications increased the color change for all composite resin restorative materials tested. Composite restorations may require re-polishing

Effects of air-polishing powders on color stability of composite resins

Directory of Open Access Journals (Sweden)

Ahmet Umut Güler

2011-10-01

Full Text Available OBJECTIVES: The purpose of this study was to investigate the effect of different air-polishing powders on the color stability of different types of composite resin restorative materials. MATERIAL AND METHODS: Thirty cylindrical specimens (15×2 mm were prepared for each of 7 composite resin restorative materials. All specimens were polished with a series of aluminum oxide polishing discs (Sof-Lex. The prepared specimens of each composite resin were randomly divided into 3 groups of 10 specimens each, for control (Group-C and two air-powder applications (Group-CP: Cavitron Prophy-Jet; Group-PS: Sirona ProSmile prophylaxis powder. A standard air-polishing unit (ProSmile Handly was used. All specimens were air-powdered for 10 s at 4-bar pressure. The distance of the spray nosel from the specimens was approximately 10 mm and angulation of the nosel was 90°. Specimens were stored in 100 mL of coffee (Nescafe Classic for 24 h at 37°C. Color measurement of all specimens was recorded before and after exposure to staining agent with a colorimeter (Minolta CR-300. Color differences (∆E* between the 2 color measurements (baseline and after 24 h storage were calculated. The data were analyzed with a 2-way ANOVA test, and mean values were compared by the Tukey HSD test (p.05 and these groups demonstrated the highest ∆E* values. For Filtek Silorane and IntenS, the highest ∆E* values were observed in Group-PS. The lowest ∆E* values for all composite resin groups were observed in Group-C. When comparing the 7 composite resin restorative materials, Aelite Aesthetic Enemal demonstrated significantly less ∆E* values than the other composite resins tested. The highest ∆E* values were observed in Quixfil. CONCLUSION: Except for Quixfil, all control groups of composite resins that were polished Sof-Lex exhibited clinically acceptable ∆E values (<3.7. Air-polishing applications increased the color change for all composite resin restorative materials

Material removal mechanisms in electrochemical-mechanical polishing of tantalum

International Nuclear Information System (INIS)

Gao, F.; Liang, H.

2009-01-01

Material removal mechanisms in tantalum chemical-mechanical polishing (CMP) and electrochemical-mechanical polishing (ECMP) were investigated using the single frequency electrochemical impedance spectroscopy (EIS). Through measuring the impedance of the tantalum surface, the single frequency EIS scan made it possible to observe the CMP and ECMP processes in situ. The impedance results presented competing mechanisms of removal and formation of a surface oxide layer of tantalum. Analysis indicated that the thickness of the oxide layer formed during polishing was related to the mechanical power correlated to the friction force and the rotating speed. Furthermore, the rate of growth and removal of the oxide film was a function of the mechanical power. This understanding is beneficial for optimization of CMP and ECMP processes.

[Polish medical ethics in the period 1945-1980].

Science.gov (United States)

Wichrowski, Marek

2003-01-01

The purpose of this article is o present that main currents of Polish medical ethics in the years 1945-1980, which the author treats as the 'prehistory' of Poland's contemporary bioethics. The author begins by ascertaining the post-war disappearance of two Polish traditions--that of the Warsaw school of philosopher-physicians (known in the West as the Polish School of Philosophy of Medicine) and the Lwów-Warsaw School of Philosophy. The political system that come into being after 1945 was not conducive to the development of medical ethics, but several clear orientations may be discerned in the utterances of physicians, lawyers, moral technologlans and academic philosophers. The analysis begins with Catholic ethics in its archaic 1950s-vintage form. The author then presents the thinking of ethicians Independent of both the Church and Marxism (the milieu of the journal 'Etyka') as well as the deontological writings of physicians.

Management of the coastal biophysical environment in tropical Queensland under conditions of heavy developmental pressure: the case of tourist resorts and acid sulphate soils

Directory of Open Access Journals (Sweden)

Patricia Erfurt-Haupt

2008-09-01

�While the remarkable surface features of the tropical coastal environment such as the surf beaches, the unique dune lakes, and the coastal vegetation, as well as the prolific wildlife, are used as selling points for new settlement and above all tourism, little is known or apparently of major concern with respect to the long term environmental impact of coastal development. While the crowding effect of large numbers of visitors and their impact on the natural environment - through significant degradation, site hardening or lack of proper on-site management – has been identified as a particular problem in certain areas, there is little knowledge of impacts on the underlying coastal geomorphology. In particular, developmental choices are often made in ignorance of, or disregard of, the widespread existence of tropical acid sulfate soils in that coastal environment. Reactive soils such as these can, and do, greatly affect the biophysical outcomes of a development if they are exposed. This paper documents such impacts in the form of a case study of the acid sulfate soil problem in relation to the development of tourist resorts, and suggests that part of the solution is for the State Government to insist on enforceable standards relating to their development for tourism in the coastal zone. These would reduce the use by many resort owners of fancy golf course developments as an environmental cover up to make it look as if they put a lot of effort into protecting the environment ….

Coastal Community Group for Coastal Resilient in Timbulsloko Village, Sayung, Demak Regency, Indonesia

Science.gov (United States)

Purnaweni, Hartuti; Kismartini; Hadi, Sudharto P.; Soraya, Ike

2018-02-01

Coastal areas are very dynamic and fragile environment, demanding for policies to preserve these areas as materialized in the Resilient Coastal Development Program (PKPT) by the Indonesian government. Amongst the targeted area was Timbulsloko Village in Sayung District, Demak Regency, which coastal areas is severely damaged by erosion. This article analyzed the development of the Coastal Community Group (CCG) related to the PKPT program in Timbulsloko village, especially in how the group is empowered to increase the community's resilient in facing the disaster. This study, applied an analytical descriptive method, used the development of the CCG as phenomenon. Primary data was collected through observation and in-depth interviews with stakeholders, accompanying the secondary data. The result shows that the PKPT funding was mostly spent on infrastructure development and used for project management, not for optimizing local economic empowerment. After the completion of the PKPT, there are no actions or following programs to keep the physical results constructed by the CCG. Accordingly, the orientation towards the CCG building capacity for Timbulsloko community's ecological resilience had not been optimally implemented. This study recommended a "putting the last first" policy approach to preparing the local community. The government must play a stronger role in encouraging a self-help local group for strong human development

Monitoring and analysis of coastal reclamation from 1995-2015 in Tianjin Binhai New Area, China.

Science.gov (United States)

Chen, Wengang; Wang, Dongchuan; Huang, Yong; Chen, Liding; Zhang, Lihui; Wei, Xiangwang; Sang, Mengqin; Wang, Feicui; Liu, Jinya; Hu, Bingxu

2017-06-20

Increasing coastal reclamation activities have been undertaken to solve the conflict between people and land resources, creating significant challenges for coordinating coastal reclamation, economic development and environmental protection. This paper analyzes the effects of coast reclamation on Gross Domestic Product growth and the quality of inshore seawater in the Tianjin Binhai New Area. Remote sensing and a Geographic Information System were used to extract the information of coastal reclamation. The correlation between the area of coastal reclamation, GDP growth and the quality of inshore seawater was analyzed and a decoupling elasticity model was used to explore trends in the relationship between economic development and coastal reclamation. Results showed that coastal reclamation activities played an important role in promoting economic development, but greatly damaged the ecological environment. Although the relationship between coastal reclamation and economic development has weakened during the last three periods, the influence on the environment will continue because of the cumulative effects of pollution. To maintain a balance between coastal reclamation, economic development and environmental protection, (1) coastal reclamation planning must address both economic and environmental outcomes; (2) environmental deficiencies from existing coastal reclamation projects must be rectified; and (3) the legal system regulating coastal reclamation needs to be refined and strengthened.

Polish adaptation of scoliosis research society-22 questionnaire.

Science.gov (United States)

Glowacki, Maciej; Misterska, Ewa; Laurentowska, Maria; Mankowski, Przemyslaw

2009-05-01

Polish adaptation of the original version of Scoliosis Research Society (SRS) instrument. The transcultural adaptation of SRS-22 and evaluation of its internal consistency. High psychometric value of the SRS-22 Questionnaire has made it an effective evaluation instrument in clinically assessing the functional status of patients with adolescent idiopathic scoliosis. First, 2 translators translated the original version into Polish. Afterwards, the translators identified differences between the translations and produced a consensus version. In the third stage, 2 native English speakers produced back translations. Finally, a team of 2 orthopedic surgeons, translators, a statistician and a psychologist reviewed all the translations to produce a prefinal version. The questionnaire was administered to 60 girls at the age of 16.6, SD 2.0 with adolescent idiopathic scoliosis treated with the Cotrel-Dubousset method in Pediatric Orthopaedics and Traumatology Clinic in Poznań. The internal consistency in the Polish version equaled 0.89 for the overall result and 0.81 for function, 0.81 for pain, 0.80 for mental health, 0.77 for self-image, and 0.69 for treatment satisfaction domains, respectively. The Polish version of SRS-22 is characterized by high internal consistency for all domains and for the overall score, which makes it an evaluation tool after surgical treatment compatible with the original SRS-22.

Climate change, sea level rise and coastal inundation along part of ...

African Journals Online (AJOL)

The phenomenon of ocean surges and other morphological processes along the Lagos coastline have generated serious public concern on the vulnerability of infrastructures and coastal services along the entire stretch of the Barrier-Lagoon coastline of Lagos State. This study examines Badagry coastal environment ...

SAFETY PLATFORM OF POLISH TRANSPORT

Directory of Open Access Journals (Sweden)

Katarzyna CHRUZIK

2016-03-01

Full Text Available Analyzing the level of Polish transport safety culture can be seen that it is now dependent on the culture of safety management within the organization and the requirements and recommendations of law in this field for different modes of transport (air, rail, road, water. Of the four basic types of transport requirements are widely developed in the aviation, rail, and water – the sea. In order to harmonize the requirements for transport safety so it appears advisable to develop a platform for exchange of safety information for different modes of transport, and the development of good practices multimodal offering the possibility of improving Polish transport safety. Described in the publication of the proposal in addition to the alignment platform experience and knowledge in the field of transport safety in all its kinds, it can also be a tool for perfecting new operators of public transport.

Metagenomics unveils the attributes of the alginolytic guilds of sediments from four distant cold coastal environments: Alginolytic guilds from cold sediments

Energy Technology Data Exchange (ETDEWEB)

Matos, Marina N. [Laboratorio de Microbiología Ambiental, Centro para el Estudio de Sistemas Marinos (CESIMAR, CONICET), Puerto Madryn U9120ACD Argentina; Lozada, Mariana [Laboratorio de Microbiología Ambiental, Centro para el Estudio de Sistemas Marinos (CESIMAR, CONICET), Puerto Madryn U9120ACD Argentina; Anselmino, Luciano E. [Laboratorio de Microbiología Ambiental, Centro para el Estudio de Sistemas Marinos (CESIMAR, CONICET), Puerto Madryn U9120ACD Argentina; Musumeci, Matías A. [Laboratorio de Microbiología Ambiental, Centro para el Estudio de Sistemas Marinos (CESIMAR, CONICET), Puerto Madryn U9120ACD Argentina; Henrissat, Bernard [Architecture et Fonction des Macromolécules Biologiques, CNRS, Aix-Marseille Université, Marseille 13288 France; INRA, USC 1408 AFMB, Marseille F-13288 France; Department of Biological Sciences, King Abdulaziz University, Jeddah 21589 Saudi Arabia; Jansson, Janet K. [Earth and Biological Sciences Directorate, Pacific Northwest National Laboratory, Richland WA 99352 USA; Mac Cormack, Walter P. [Instituto Antártico Argentino, Ciudad Autónoma de Buenos Aires, C1064ABR, Argentina; Instituto Nanobiotec, CONICET - Universidad de Buenos Aires, Ciudad Autónoma de Buenos Aires, C1113AAC, Argentina; Carroll, JoLynn [Akvaplan-niva, Fram - High North Research Centre for Climate and the Environment, Tromsø NO-9296 Norway; CAGE - Centre for Arctic Gas Hydrate, Environment and Climate, UiT The Arctic University of Norway, Tromsø N-9037 Norway; Sjöling, Sara [School of Natural Sciences and Environmental Studies, Södertörn University, Huddinge 141 89 Sweden; Lundgren, Leif [Stockholm University, Stockholm SE-106 91 Sweden; Dionisi, Hebe M. [Laboratorio de Microbiología Ambiental, Centro para el Estudio de Sistemas Marinos (CESIMAR, CONICET), Puerto Madryn U9120ACD Argentina

2016-07-18

Alginates are abundant polysaccharides in brown algae that constitute an important energy source for marine heterotrophic bacteria. Despite the key role of alginate assimilation processes in the marine carbon cycle, little information is available on the bacterial populations involved in these processes. The goal of this work was to gain insight into the structure and functional traits of the alginolytic communities from sediments of cold coastal environments. Sediment metagenomes from high-latitude regions of both Hemispheres were interrogated for alginate lyase gene homolog sequences and their genomic context. Sediments contained highly abundant and diverse bacterial assemblages with alginolytic potential, including members of Bacteroidetes and Proteobacteria, as well as several poorly characterized taxa. Temperature and salinity were correlated to the variation in community structure. The microbial communities in Arctic and Antarctic sediments exhibited the most similar alginolytic profiles, whereas brackish sediments had a higher proportion of novel members. Examination of the gene context of the alginate lyase homologs revealed distinct patterns according to the phylogenetic origin of the scaffolds, with evidence of evolutionary relationships among lineages. This information is relevant for understanding carbon fluxes in cold coastal environments and provides valuable information for the development of biotechnological applications from brown algae biomass.

RESEARCH OF REFRIGERATION SYSTEMS FAILURES IN POLISH FISHING VESSELS

Directory of Open Access Journals (Sweden)

Waldemar KOSTRZEWA

2013-07-01

Full Text Available Temperature is a basic climatic parameter deciding about the quality change of fishing products. Time, after which qualitative changes of caught fish don’t exceed established, acceptable range, is above all the temperature function. Temperature reduction by refrigeration system of the cargo hold is a basic technical method, which allows extend transport time. Failures of refrigeration systems in fishing vessels have a negative impact on the environment in relation to harmful refrigerants emission. The paper presents the statistical analysis of failures occurred in the refrigeration systems of Polish fishing vessels in 2007‐2011 years. Analysis results described in the paper can be a base to draw up guidelines, both for designers as well as operators of the marine refrigeration systems.

Effect finishing and polishing procedures on the surface roughness of IPS Empress 2 ceramic.

Science.gov (United States)

Boaventura, Juliana Maria Capelozza; Nishida, Rodrigo; Elossais, André Afif; Lima, Darlon Martins; Reis, José Mauricio Santos Nunes; Campos, Edson Alves; de Andrade, Marcelo Ferrarezi

2013-01-01

To evaluate the surface roughness of IPS Empress 2 ceramic when treated with different finishing/polishing protocols. Sixteen specimens of IPS Empress 2 ceramic were made from wax patterns obtained using a stainless steel split mold. The specimens were glazed (Stage 0-S0, control) and divided into two groups. The specimens in Group 1 (G1) were finished/polished with a KG Sorensen diamond point (S1), followed by KG Sorensen siliconized points (S2) and final polishing with diamond polish paste (S3). In Group 2 (G2), the specimens were finished/polished using a Shofu diamond point (S1), as well as Shofu siliconized points (S2) and final polishing was performed using Porcelize paste (S3). After glazing (S0) and following each polishing procedure (S1, S2 or S3), the surface roughness was measured using TALYSURF Series 2. The average surface roughness results were analyzed using ANOVA followed by Tukey post-hoc tests (α = 0.01) RESULTS: All of the polishing procedures yielded higher surface roughness values when compared to the control group (S0). S3 yielded lower surface roughness values when compared to S1 and S2. The proposed treatments negatively affected the surface roughness of the glazed IPS Empress 2 ceramic.

The effects of different polishing techniques on the staining resistance of CAD/CAM resin-ceramics

Science.gov (United States)

Demirci, Tevfik; Demirci, Gamze; Sagsoz, Nurdan Polat; Yildiz, Mehmet

2016-01-01

PURPOSE The purposes of this study were to evaluate the staining resistance of CAD/CAM resin-ceramics polished with different techniques and to determine the effectiveness of the polishing techniques on resin-ceramics, comparing it with that of a glazed glass-ceramic. MATERIALS AND METHODS Four different CAD/CAM ceramics (feldspathic ceramic: C-CEREC Blocs, (SIRONA) and three resin-ceramics: L-Lava Ultimate, (3M ESPE), E-Enamic, (VITA) and CS-CeraSmart, (GC)) and one light cure composite resin: ME-Clearfil Majesty Esthetic (Kuraray) were used. Only C samples were glazed (gl). Other restorations were divided into four groups according to the polishing technique: nonpolished control group (c), a group polished with light cure liquid polish (Biscover LV BISCO) (bb), a group polished with ceramic polishing kit (Diapol, EVE) (cd), and a group polished with composite polishing kit (Clearfil Twist Dia, Kuraray) (kc). Glazed C samples and the polished samples were further divided into four subgroups and immersed into different solutions: distilled water, tea, coffee, and fermented black carrot juice. Eight samples (8 × 8 × 1 mm) were prepared for each subgroup. According to CIELab system, four color measurements were made: before immersion, immersion after 1 day, after 1 week, and after 1 month. Data were analyzed with repeated measures of ANOVA (α=.05). RESULTS The highest staining resistance was found in gl samples. There was no difference among gl, kc and cd (P>.05). Staining resistance of gl was significantly higher than that of bb (PCeramic and composite polishing kits can be used for resin ceramics as a counterpart of glazing procedure used for full ceramic materials. Liquid polish has limited indications for resin ceramics. PMID:28018558

Ostreococcus tauri Luminescent Reporter Lines as Biosensors for Detecting Pollution From Copper-Mine Tailing Effluents in Coastal Environments

Directory of Open Access Journals (Sweden)

Carlos Henríquez-Castillo

2018-05-01

Full Text Available Phytoplankton cells are excellent biosensors for environmental monitoring and toxicity assessments in different natural systems. Green algae, in particular, appear to be more responsive to copper (Cu disturbances. This is interesting considering that Cu pollution in coastal environments has increased over the last century, with enormous repercussions to marine ecosystems. Unfortunately, no high-throughput method exists for the environmental monitoring of Cu toxicity in seawater. To assess potential uses as biosensors of Cu pollution, high-throughput screening was performed on five luminescence reporter lines constructed in the green algae Ostreococcus tauri RCC745. The reporter line expressing the iron storage ferritin protein fused to luciferase (Fer-Luc was the most sensitive, responding to Cu concentrations in the μM range. Fer-Luc was also the most sensitive reporter line for detecting toxicity in mining-derived polluted seawater predominantly contaminated by soluble Cu. Nevertheless, the Cyclin-Dependent-Kinase A (CDKA reporter was most suitable for detecting the toxicity of copper-mine tailing effluents containing other metals (e.g., iron. These results highlight that Ostreococcus biosensors can serve as a reliable, inexpensive, and automated, high-throughput laboratory approach for performing seawater analyses of coastal areas subjected to metal disturbances. When challenged with Cu, O. tauri not only evidenced a rapid, transcriptional response for the tested genes, but also showed changes in a broad range of genes, especially as related to the stress response. Overall, the obtained results reinforce that a single biosensor is insufficient when dealing with complex mixtures of toxic compounds in natural environments.

High voltage performance of a dc photoemission electron gun with centrifugal barrel-polished electrodes

Science.gov (United States)

Hernandez-Garcia, C.; Bullard, D.; Hannon, F.; Wang, Y.; Poelker, M.

2017-09-01

The design and fabrication of electrodes for direct current (dc) high voltage photoemission electron guns can significantly influence their performance, most notably in terms of maximum achievable bias voltage. Proper electrostatic design of the triple-point junction shield electrode minimizes the risk of electrical breakdown (arcing) along the insulator-cable plug interface, while the electrode shape is designed to maintain work, we describe a centrifugal barrel-polishing technique commonly used for polishing the interior surface of superconducting radio frequency cavities but implemented here for the first time to polish electrodes for dc high voltage photoguns. The technique reduced polishing time from weeks to hours while providing surface roughness comparable to that obtained with diamond-paste polishing and with unprecedented consistency between different electrode samples. We present electrode design considerations and high voltage conditioning results to 360 kV (˜11 MV/m), comparing barrel-polished electrode performance to that of diamond-paste polished electrodes. Tests were performed using a dc high voltage photogun with an inverted-geometry ceramic insulator design.

Coupling bacterioplankton populations and environment to community function in coastal temperate waters

DEFF Research Database (Denmark)

Traving, S. J.; Bentzon-Tilia, Mikkel; Knudsen-Leerbeck, H.

2016-01-01

drivers of bacterioplankton community functions, taking into account the variability in community composition and environmental conditions over seasons, in two contrasting coastal systems. A Least Absolute Shrinkage and Selection Operator (LASSO) analysis of the biological and chemical data obtained from...... surface waters over a full year indicated that specific bacterial populations were linked to measured functions. Namely, Synechococcus (Cyanobacteria) was strongly correlated with protease activity. Both function and community composition showed seasonal variation. However, the pattern of substrate...... of common drivers of bacterioplankton community functions in two different systems indicates that the drivers may be of broader relevance in coastal temperate waters....

Persistent organochlorine pollutants (POP's) in coastal environments of Southeast Gulf of Mexico

International Nuclear Information System (INIS)

Vazquez-Botello, A.; Diaz-Gonzalez, G.; Rueda-Quintana, L.

1999-01-01

Analyses to determine the presence and concentrations of persistent organochlorine pollutants (POP's) were carried out in sediments and estuarine organisms (Crassostrea virginica) from five coastal lagoons of the Southeast Gulf of Mexico. The results of this study show high levels of POP's in sediments with high concentration of Heptachlor, Aldrin, Dieldrin and ppDDT, either in sediments or biological tissues. According to national regulations, the use and dispersion of these chemical have been severely restricted or totally prohibited in developed countries, however their presence in coastal areas indicate an extensive use and recent application of them. (author)

Polishing and toothbrushing alters the surface roughness and gloss of composite resins.

Science.gov (United States)

Kamonkhantikul, Krid; Arksornnukit, Mansuang; Takahashi, Hidekazu; Kanehira, Masafumi; Finger, Werner J

2014-01-01

This study aimed to investigate the surface roughness and gloss of composite resins after using two polishing systems and toothbrushing. Six composite resins (Durafill VS, Filtek Z250, Filtek Z350 XT, Kalore, Venus Diamond, and Venus Pearl) were evaluated after polishing with two polishing systems (Sof-Lex, Venus Supra) and after toothbrushing up to 40,000 cycles. Surface roughness (Ra) and gloss were determined for each composite resin group (n=6) after silicon carbide paper grinding, polishing, and toothbrushing. Two-way ANOVA indicated significant differences in both Ra and gloss between measuring stages for the composite resins tested, except Venus Pearl, which showed significant differences only in gloss. After polishing, the Filtek Z350 XT, Kalore, and Venus Diamond showed significant increases in Ra, while all composite resin groups except the Filtek Z350 XT and Durafill VS with Sof-Lex showed increases in gloss. After toothbrushing, all composite resin demonstrated increases in Ra and decreases in gloss.

Polish students at the Académie Julian until 1919

Directory of Open Access Journals (Sweden)

Zgórniak, Marek

2012-08-01

Full Text Available The subject of the article is the presence of Polish students in the most important private artistic school in Paris in the second half of the 19thcentury. The extant records regarding the atelier for male students made it possible to compile a list of about 165 Polish painters and sculptors studying there in the period from 1880 to 1919. The text presents the criteria used when preparing the list and the diagrams show the fluctuations in registration and the number of Polish artists in particular ateliers in successive years. The observations contained in the article have a summary nature and are illustrated only with selected examples.

Neologisms in bilingual digital dictionaries (on the example of Bulgarian-Polish dictionary

Directory of Open Access Journals (Sweden)

Ludmila Dimitrova

2015-11-01

Full Text Available Neologisms in bilingual digital dictionaries (on the example of Bulgarian-Polish dictionary The paper discusses the presentation of neologisms in the recent version of the Bulgarian-Polish digital dictionary. We also continue the discussion of important problems related to the classifiers of the verbs as headwords of the digital dictionary entries. We analyze some examples from ongoing experimental version of the Bulgarian-Polish digital dictionary.

General review of literature relevant to coastal water discharges

International Nuclear Information System (INIS)

Pentreath, R.J.

1985-01-01

This review on the behaviour of radionuclides released into coastal water from the radioactive discharges, prepared on the basis of existing publications and documents, is divided into parts on pathways of exposure, behaviour of radionuclides in coastal environments, biological avialability of radionuclides, habit surveys and critical groups, assessment of dose to man and the effects of radiation on aquatic organisms

Knowledge Management in the Project Life Cycle - Initial Research on Polish Smes

Directory of Open Access Journals (Sweden)

Łapuńka Iwona

2014-12-01

Full Text Available Contemporary organizations run their activities in an environment, which might be defined as fully uncertain and turbulent. Due to variations that occur in the surrounding environment, an increased attention of management practitioners and theoreticians is paid to new management concepts frequently in an integrated version. The authors express a deep belief that consolidation of approaches to project management and knowledge management constitutes a response to challenge for modern organizations. Research into the issue was based on an attempt to determine significance of the knowledge management issue in a life of projects performed by Polish small and medium-sized enterprises (SMEs. Systemizing of desired knowledge management results in a project, from the point of view of its crucial success factors, is essentially substantiated in providing success of projects performed.

Coastal climate is associated with elevated solar irradiance and higher 25(OH)D level.

Science.gov (United States)

Cherrie, M P C; Wheeler, B W; White, M P; Sarran, C E; Osborne, N J

2015-04-01

There is evidence that populations living close to the coast have improved health and wellbeing. Coastal environments are linked to promotion of physical activity through provision of safe, opportune, aesthetic and accessible spaces for recreation. Exposure to coastal environments may also reduce stress and induce positive mood. We hypothesised that coastal climate may influence the vitamin D status of residents and thus partly explain benefits to health. Ecological and cross-sectional analyses were designed to elucidate the connection between coastal residence and vitamin D status. We divided residential data, from developed land use areas and the Lower Super Output Areas or Data Zones (Scotland) of the 1958 Birth Cohort participants, into the following coastal bands: 50 km. This relationship was modified by latitude with settlements at a lower latitude exhibiting a greater effect. Individuals living closer to the coast in England had higher vitamin D levels than those inland, particularly in autumn. Geographic location may influence biochemistry and health outcomes due to environmental factors. This can provide benefits in terms of vitamin D status but may also pose a risk due to higher skin cancer risk. We provide further evidence in support of the claim that coastal environments can provide opportunities for health and wellbeing. Copyright © 2015 Elsevier Ltd. All rights reserved.

On the Potential of Surfers to Monitor Environmental Indicators in the Coastal Zone

OpenAIRE

Brewin, Robert J. W.; de Mora, Lee; Jackson, Thomas; Brewin, Thomas G.; Shutler, Jamie

2015-01-01

The social and economic benefits of the coastal zone make it one of the most treasured environments on our planet. Yet it is vulnerable to increasing anthropogenic pressure and climate change. Coastal management aims to mitigate these pressures while augmenting the socio-economic benefits the coastal region has to offer. However, coastal management is challenged by inadequate sampling of key environmental indicators, partly due to issues relating to cost of data collection. Here, we investiga...

[A study of different polishing techniques for amalgams and glass-cermet cement by scanning electron microscope (SEM)].

Science.gov (United States)

Kakaboura, A; Vougiouklakis, G; Argiri, G

1989-01-01

Finishing and polishing an amalgam restoration, is considered as an important and necessary step of the restorative procedure. Various polishing techniques have been recommended to success a smooth amalgam surface. The aim of this study was to investigate the influence of three different polishing treatments on the marginal integrity and surface smoothness of restorations made of three commercially available amalgams and a glass-cermet cement. The materials used were the amalgams, Amalcap (Vivadent), Dispersalloy (Johnson and Johnson), Duralloy (Degussa) and the glass-cermet Katac-Silver (ESPE). The occlusal surfaces of the restorations were polished by the methods: I) round bur, No4-rubber cup-zinc oxide paste in a small brush, II) round bur No 4-bur-brown, green and super green (Shofu) polishing cups and points successively and III) amalgam polishing bur of 12-blades-smooth amalgam polishing bur. Photographs from unpolished and polished surfaces of the restorations, were taken with scanning electron microscope, to evaluate the polishing techniques. An improvement of marginal integrity and surface smoothness of all amalgam restorations was observed after the specimens had been polished with the three techniques. Method II, included Shofu polishers, proved the best results in comparison to the methods I and III. Polishing of glass-cermet cement was impossible with the examined techniques.

Adaptation of the ORTHO-15 test to Polish women and men.

Science.gov (United States)

Brytek-Matera, Anna; Krupa, Magdalena; Poggiogalle, Eleonora; Donini, Lorenzo Maria

2014-03-01

There is a lack of Polish tools to measure behaviour related to orthorexia nervosa. The purpose of the present study was to validate the Polish version of the ORTHO-15 test. 341 women and 59 men (N = 400) were recruited, whose age ranged from 18 to 35 years. Mean age was 23.09 years (SD = 3.14) in women and 24.02 years (SD = 3.87) in men. The ORTHO-15 test and the EAT-26 test were used in the present study. Factor analysis (exploratory and confirmatory analysis) was used in the present study. Exploratory factor analysis performed on the initial 15 items from a random split half of the study group suggested a nine-item two-factor structure. Confirmatory factor analysis performed on the second randomly selected half of the study group supported this two-factor structure of the ORTHO-15 test. The Polish version of the ORTHO-15 test demonstrated an internal consistency (Cronbach's alpha) equal to 0.644. The Polish version of the ORTHO-15 test is a reliable and valuable instrument to assess obsessive attitudes related to healthy and proper nutrition in Polish female and male population.

Gloss and surface roughness produced by polishing kits on resin composites.

Science.gov (United States)

Sadidzadeh, Ramtin; Cakir, Deniz; Ramp, Lance C; Burgess, John O

2010-08-01

To compare in vitro the surface roughness (Ra) and gloss (G) produced by three conventional and one experimental polishing kits on four resin composites. 24 discs were prepared (d = 12 mm, t = 4 mm) for each resin composite: Filtek Supreme Plus Body/A2 (FSB), Yellow Translucent (FST), Heliomolar/A2 (HM), and EsthetX/A2 (EX) following the manufacturers' instructions. They were finished with 320 grit silicon carbide paper for 80 seconds each. Polishing systems: Sof-Lex, Enhance-Pogo, Astropol and Experimental Discs/EXL-695, were applied following manufacturers' instructions. Each specimen was ultrasonically cleaned with distilled water and dried. Gloss and Ra were measured with a small area glossmeter (Novo-curve) and non-contact profilometer (Proscan 2000) following ISO 4288, respectively. The results were evaluated by two-way ANOVA followed by separate one-way ANOVA and Tukey/Kramer test (P = 0.05). There was a significant interaction of surface roughness and gloss between the composites and polishing systems (P gloss was obtained for FSB composite polished with the Experimental kit. The experimental polishing system produced smoothest surfaces (P gloss (P < 0.05).

[Adhesion of oral microorganisms on dental porcelain polished and glazed].

Science.gov (United States)

Wang, Yi-ning; Wen, Guo-jiang; Shi, Bin; Pan, Xin-hua

2003-09-01

This study compared the roughness of porcelain polished or glazed surfaces and the adhesion of oral streptococcus mutans to them in vitro. 30 porcelain samples were made. Porcelain samples in group A were polished with diamond paste. Porcelain samples were glazed in group B and were polished with Al2O3 (240#) bur in group C. Their roughness values were measured by profilometer. Standardized cell suspensions were incubated with test samples for one hour at 37 degrees C, then retained cells were counted by image analysis (percentage area of a microscopic field covered by cells). Roughness values of group A, B, C were respectively (0.1987 +/- 0.057) microm, (0.1990 +/- 0.091) microm, (0.4260 +/- 0.174) microm. There was no significantly difference between group A and group B. The roughness samples in group C were significantly rougher than that in the other groups. The amount of retained cells in group A, group B, group C was respectively (15.92 +/- 4.37)%, (16.39 +/- 6.31)% and (41.48 +/- 12.1)%. There was no significant difference between the cell adhesion on porcelain surface glazed and polished, but more bacteria adhered on the porcelain surface in group C. Porcelain surface polished treatment was clinically acceptable compared with its glazed. They all exhibited the least amount of bacteria adhesion. The more porcelain surface was rough, the more bacteria adhered on it.

Electrochemical Polishing Applications and EIS of a Vitamin B4-Based Ionic Liquid

International Nuclear Information System (INIS)

Wixtrom, Alex I.; Buhler, Jessica E.; Reece, Charles E.; Abdel-Fattah, Tarek M.

2013-01-01

Modern particle accelerators require minimal interior surface roughness for Niobium superconducting radio frequency (SRF) cavities. Polishing of the Nb is currently achieved via electrochemical polishing with concentrated mixtures of sulfuric and hydrofluoric acids. This acid-based approach is effective at reducing the surface roughness to acceptable levels for SRF use, but due to acid-related hazards and extra costs (including safe disposal of used polishing solutions), an acid-free method would be preferable. This study focuses on an alternative electrochemical polishing method for Nb, using a novel ionic liquid solution containing choline chloride, also known as Vitamin B 4 (VB 4 ). Potentiostatic electrochemical impedance spectroscopy (EIS) was also performed on the VB4-based system. Nb polished using the VB4-based method was found to have a final surface roughness comparable to that achieved via the acid-based method, as assessed by atomic force microscopy (AFM). These findings indicate that acid-free VB 4 -based electrochemical polishing of Nb represents a promising replacement for acid-based methods of SRF cavity preparation

Assessment of coastal Strandveld integrity using WorldView-2 imagery in False Bay, South Africa

CSIR Research Space (South Africa)

Lück-Vogel, Melanie

2018-05-01

Full Text Available The coastal zone as interface between land and sea faces much pressure from human activities. These pressures make it difficult for the coastal zones to fulfil their natural functions, so threatening the state of coastal environments and making them...

Coastal Geographic Structures in Coastal-Marine Environmental Management

Science.gov (United States)

Baklanov, P. Ya.; Ganzei, K. S.; Ermoshin, V. V.

2018-01-01

It has been proposed to distinguish the coastal geographic structures consisting of a spatial combination of three interconnected and mutually conditioned parts (coastal-territorial, coastal, coastal-marine), which are interlinked with each other by the cumulative effect of real-energy flows. Distinguishing specific resource features of the coastal structures, by which they play a connecting role in the complex coastalmarine management, has been considered. The main integral resource feature of the coastal structures is their connecting functions, which form transitional parts mutually connecting the coastal-territorial and coastalmarine environmental management.

Effect of polishing time and pressure on quality characteristics of rice grain

International Nuclear Information System (INIS)

Karim, M.A.

2002-01-01

Since totally unpolished rice has poor cooking quality, a certain amount of polishing for the removal of the outermost bran layers is essential. To determine the best combination of polishing time and pressure with respect to obtaining optimum quantity/quality, the brown rice (head grains) of a rice strain 4048 was milled for 10, 20, 30 and 40 seconds against 1,2,3,4 and 5 lbs pressure in a Burrows McGill Polisher No. 3. the quality characteristics studied were: total milling recovery, head rice recovery, whiteness of milled rice, protein content of grain, grain length and bursting upon cooking. Both, total milled rice and head rice reduced while the whiteness of milled rice improved significantly with an increase in polishing time and or pressure. The protein content decreased gradually with an increase in time and pressure of milling but the effect was non significant. The cooked grain length increased with an increase in milling degree up to a stage, beyond which it declined. The increase in bursting of grains on cooking. A combination of 20 seconds polishing time with 2 lbs pressure or 20 seconds polishing time with 3 lbs pressure was found to be the best combination of obtaining the optimum quality as well as the quality of milled rice.(author)

The coastal landscape of the river of silver basis for management

International Nuclear Information System (INIS)

Martinez, A.; Fernandez, E.; Cendom, A.; Vila, L.

2013-01-01

A complex of morphogenic, ecologic and cultural factors converge in coastal landscape modelling. The goal of this research is to identify the coastal environment as a water-land interphase in the Rio de la Plata, Uruguay. The area of work is within Punta Gorda, Colonia Department, and Maldonado River, in the Maldonado Department. An integrated landscape approach is used to interpret the complex of natural areas. The knowledge of natural complex is the goal of this research using the vegetation dynamic as an expression of site condition. Cartography at scale 1:50.000, colour composition of Landsat images at scale 1:100.000 (1994), aerial photographs at scale 1:10.000 (1994), are the source of information. A methodology of three components was organized: a typology of the coastal border, scale 1:500.000, a littoral morphology analysis using maps and aerial photographs, scale 1:10.000 and the coastal landscape, scale 1:100.000. A land cover legend was organized to integrate: geomorphology, vegetation and human intervention. It has 12 classes y 4 subclasses of land cover. This information was integrated in an analysis of an ideal coastal outline that represents the ideal disposition of the landscape elements in a cross and vertical perspective. The final goal of this research is an inventory of coastal uniform sectors. The research was performed within an approach of environmental factors equilibrium, such as geomorphology, environment, biologic and anthropogenic, and natural’s process in progress. Specific and general coastal problems are identified. A conceptual coastal landscape approach, a coastal cartography and setting of landscape units are the final products

How to Investigate Polish Clusters’ Attractiveness for Inward FDI? Addressing Ambiguity Problem

Directory of Open Access Journals (Sweden)

Götz Marta

2014-09-01

Full Text Available The aim of the paper is to assess whether, and in what fashion, managers of Polish cluster organizations perceive the attractiveness of foreign direct investment in Polish clusters This research is exploratory and qualitative in nature. The complex nature of Polish clusters, which can benefit from and be competitively challenged by, FDI are identified and a conceptual framework for assessing that nature is proposed; specifically, research using the grounded theory method (GTM.

Robotic Automation in Computer Controlled Polishing

Science.gov (United States)

Walker, D. D.; Yu, G.; Bibby, M.; Dunn, C.; Li, H.; Wu, Y.; Zheng, X.; Zhang, P.

2016-02-01

We first present a Case Study - the manufacture of 1.4 m prototype mirror-segments for the European Extremely Large Telescope, undertaken by the National Facility for Ultra Precision Surfaces, at the OpTIC facility operated by Glyndwr University. Scale-up to serial-manufacture demands delivery of a 1.4 m off-axis aspheric hexagonal segment with surface precision robots and computer numerically controlled ('CNC') polishing machines for optical fabrication. The objective was not to assess which is superior. Rather, it was to understand for the first time their complementary properties, leading us to operate them together as a unit, integrated in hardware and software. Three key areas are reported. First is the novel use of robots to automate currently-manual operations on CNC polishing machines, to improve work-throughput, mitigate risk of damage to parts, and reduce dependence on highly-skilled staff. Second is the use of robots to pre-process surfaces prior to CNC polishing, to reduce total process time. The third draws the threads together, describing our vision of the automated manufacturing cell, where the operator interacts at cell rather than machine level. This promises to deliver a step-change in end-to-end manufacturing times and costs, compared with either platform used on its own or, indeed, the state-of-the-art used elsewhere.

ROUGHNESS ANALYSIS OF VARIOUSLY POLISHED NIOBIUM SURFACES

Energy Technology Data Exchange (ETDEWEB)

Ribeill, G.; Reece, C.

2008-01-01

Niobium superconducting radio frequency (SRF) cavities have gained widespread use in accelerator systems. It has been shown that surface roughness is a determining factor in the cavities’ effi ciency and maximum accelerating potential achievable through this technology. Irregularities in the surface can lead to spot heating, undesirable local electrical fi eld enhancement and electron multipacting. Surface quality is typically ensured through the use of acid etching in a Buffered Chemical Polish (BCP) bath and electropolishing (EP). In this study, the effects of these techniques on surface morphology have been investigated in depth. The surface of niobium samples polished using different combinations of these techniques has been characterized through atomic force microscopy (AFM) and stylus profi lometry across a range of length scales. The surface morphology was analyzed using spectral techniques to determine roughness and characteristic dimensions. Experimentation has shown that this method is a valuable tool that provides quantitative information about surface roughness at different length scales. It has demonstrated that light BCP pretreatment and lower electrolyte temperature favors a smoother electropolish. These results will allow for the design of a superior polishing process for niobium SRF cavities and therefore increased accelerator operating effi ciency and power.

Multi-objective optimization of circular magnetic abrasive polishing of SUS304 and Cu materials

Energy Technology Data Exchange (ETDEWEB)

Nguyen, NhatTan; Yin, ShaoHui; Chen, FengJun; Yin, HanFeng [Hunan University, Changsha (China); Pham, VanThoan [Hanoi University, Hanoi (Viet Nam); Tran, TrongNhan [Industrial University of Ho Chi Minh City, HCM City (Viet Nam)

2016-06-15

In this paper, a Multi-objective particle swarm optimization algorithm (MOPSOA) is applied to optimize surface roughness of workpiece after circular magnetic abrasive polishing. The most important parameters of polishing model, namely current, gap between pole and workpiece, spindle speed and polishing time, were considered in this approach. The objective functions of the MOPSOA depend on the quality of surface roughness of polishing materials with both simultaneous surfaces (Ra1, Ra2), which are determined by means of experimental approach with the aid of circular magnetic field. Finally, the effectiveness of the approach is compared between the optimal results with the experimental data. The results show that the new proposed polishing optimization method is more feasible.

Etymology in the Polish Academy of Sciences Great Dictionary of ...

African Journals Online (AJOL)

The article offers an insight into etymological information provided in the Polish Academy of Sciences Great Dictionary of Polish (Pol. Wielki słownik języka polskiego PAN, WSJP PAN). The dictionary and the rules of producing the entries are briefly presented. These rules influence the way of working on etymology within ...

An Overview of Biodegradation of LNAPLs in Coastal (Semi)-arid Environment.

KAUST Repository

Yadav, Brijesh Kumar; Hassanizadeh, S Majid

2011-01-01

environmental variables, and their remediation favoring customization requires a sound understanding of their integrated behavior on fate and transport of LNAPLs under site-specific conditions. The arid and semi-arid coastal sites are characterized by specific

Antecedents of Accelerated Internationalisation of Polish and Czech Small and Medium-Sized Enterprises

Directory of Open Access Journals (Sweden)

Izabela Kowalik

2017-09-01

Full Text Available Objective: The study goal was the investigation of relationships between accelerated internationalisation descriptors and antecedent firm- and entrepreneur-related factors in Polish and Czech SMEs. Research Design & Methods: In order to compare Polish and Czech companies, the data collected in two independent studies were used. The study of 233 Polish companies was conducted with the use of CATI method in 2014; 108 Czech companies were surveyed in 2013/2014 with the use of CAWI method. In both samples half of the surveyed SME-exporters were conforming to the accelerated internationalisation criteria. Findings: In both samples the “global vision” elements and company internationalisation scale and speed were interrelated. In the Polish companies this relationship was moderated by company size. There was the lack of strong positive relationships between innovativeness and internationalisation speed and scale in both samples. Implications & Recommendations:The managerial mindset has a decisive role for accelerated internationalisation in both Czech and Polish SMEs. The innovativeness of offering is not indispensable for fast foreign expansion. Larger companies may expand abroad faster if they have internationally oriented managers. Contribution & Value Added:This work addresses a research gap concerning idiosyncrasies of internationalisation antecedents in Polish and Czech enterprises. As the results show, there is no common internationalisation pattern for Polish and Czech SMEs.

Effect of grinding and polishing on roughness and strength of zirconia.

Science.gov (United States)

Khayat, Waad; Chebib, Najla; Finkelman, Matthew; Khayat, Samer; Ali, Ala

2018-04-01

The clinical applications of high-translucency monolithic zirconia restorations have increased. Chairside and laboratory adjustments of these restorations are inevitable, which may lead to increased roughness and reduced strength. The influence of grinding and polishing on high-translucency zirconia has not been investigated. The purpose of this in vitro study was to compare the roughness averages (Ra) of ground and polished zirconia and investigate whether roughness influenced strength after aging. High-translucency zirconia disks were milled, sintered, and glazed according to the manufacturer's recommendations. Specimens were randomized to 4 equal groups. Group G received only grinding; groups GPB and GPK received grinding and polishing with different polishing systems; and group C was the (unground) control group. All specimens were subjected to hydrothermal aging in an autoclave at 134°C at 200 kPa for 3 hours. Roughness average was measured using a 3-dimensional (3D) optical interferometer at baseline (Ra1), after grinding and polishing (Ra2), and after aging (Ra3). A biaxial flexural strength test was performed at a rate of 0.5 mm/min. Statistical analyses were performed using commercial software (α=.05). Group G showed a significantly higher mean value of Ra3 (1.96 ±0.32 μm) than polished and glazed groups (P.05). Compared with baseline, the roughness of groups G and GPB increased significantly after surface treatments and after aging, whereas aging did not significantly influence the roughness of groups GPK or C. Group G showed the lowest mean value of biaxial flexural strength (879.01 ±157.99 MPa), and the highest value was achieved by group C (962.40 ±113.84 MPa); no statistically significant differences were found among groups (P>.05). Additionally, no significant correlation was detected between the Ra and flexural strength of zirconia. Grinding increased the roughness of zirconia restorations, whereas proper polishing resulted in smoothness

Acoustic Emission Based In-process Monitoring in Robot Assisted Polishing

DEFF Research Database (Denmark)

Pilny, Lukas; Bissacco, Giuliano; De Chiffre, Leonardo

The applicability of acoustic emission (AE) measurements for in-process monitoring in the Robot Assisted Polishing (RAP) process was investigated. Surface roughness measurements require interruption of the process, proper surface cleaning and measurements that sometimes necessitate removal...... improving the efficiency of the process. It also allows for intelligent process control and generally enhances the robustness and reliability of the automated RAP system in industrial applications....... of the part from the machine tool. In this study, development of surface roughness during polishing rotational symmetric surfaces by the RAP process was inferred from AE measurements. An AE sensor was placed on a polishing tool, and a cylindrical rod of Vanadis 4E steel having an initial turned surface...

Surface changes of metal alloys and high-strength ceramics after ultrasonic scaling and intraoral polishing.

Science.gov (United States)

Yoon, Hyung-In; Noh, Hyo-Mi; Park, Eun-Jin

2017-06-01

This study was to evaluate the effect of repeated ultrasonic scaling and surface polishing with intraoral polishing kits on the surface roughness of three different restorative materials. A total of 15 identical discs were fabricated with three different materials. The ultrasonic scaling was conducted for 20 seconds on the test surfaces. Subsequently, a multi-step polishing with recommended intraoral polishing kit was performed for 30 seconds. The 3D profiler and scanning electron microscopy were used to investigate surface integrity before scaling (pristine), after scaling, and after surface polishing for each material. Non-parametric Friedman and Wilcoxon signed rank sum tests were employed to statistically evaluate surface roughness changes of the pristine, scaled, and polished specimens. The level of significance was set at 0.05. Surface roughness values before scaling (pristine), after scaling, and polishing of the metal alloys were 3.02±0.34 µm, 2.44±0.72 µm, and 3.49±0.72 µm, respectively. Surface roughness of lithium disilicate increased from 2.35±1.05 µm (pristine) to 28.54±9.64 µm (scaling), and further increased after polishing (56.66±9.12 µm, P scaling (from 1.65±0.42 µm to 101.37±18.75 µm), while its surface roughness decreased after polishing (29.57±18.86 µm, P scaling significantly changed the surface integrities of lithium disilicate and zirconia. Surface polishing with multi-step intraoral kit after repeated scaling was only effective for the zirconia, while it was not for lithium disilicate.

Droughts in historical times in Polish territory

Science.gov (United States)

Limanowka, Danuta; Cebulak, Elzbieta; Pyrc, Robert; Doktor, Radoslaw

2015-04-01

Climate change is one of the key environmental, social and economical issues, and it is also followed by political consequences. Impact of climate conditions on countries' economy is increasingly recognized, and a lot of attention is given, both in the global scale and by the individual national governments. In years 2008-2010, at the Poland -Institute of Meteorology and Water Management-National Research Institute was realized the KLIMAT Project on Impact of climate change on environment, economy and society (changes, effects and methods of reducing them, conclusions for science, engineering practice and economic planning) No. POIG01-03-01-14-011/08. The project was financed by the European Union and Polish state budget in frame of Innovative Economy Operational Programme. A very wide range of research was carried out in the different thematic areas. One of them was "Natural disasters and internal safety of the country (civil and economical)." The problem of drought in Poland was developed in terms of meteorology and hydrology. "Proxy" Data Descriptions very often inform about dry years and seasons, hot periods without precipitation. Analysis of historical material allowed to extract the years that have experienced prolonged periods of high temperatures and rainfall shortages. Weather phenomenon defined as drought belongs to extreme events. This information was very helpful in the process of indexing and thus to restore the course and intensity of climatic elements in the past. The analysis covered the period from year 1000 to modern times. Due to the limited information from the period of 1000-1500 the authors focused primarily on the period from 1500 to 2010. Analysis of the collected material has allowed the development of a highly precise temporal structure of the possible occurrence of dry periods to Polish territory.

Emissions from the Polish power industry

International Nuclear Information System (INIS)

Uliasz-Bochenczyk, Alicja; Mokrzycki, Eugeniusz

2007-01-01

Poland is a country where power and heat energy production is based on conventional fuel combustion, above all hard coal and lignite. In power plants and combined heat and power plants, fossil fuel combustion results in emitting to the atmosphere first of all SO 2 , NO x , CO, particulate matter, greenhouse gases for instance N 2 O and CO 2 . For many years the Polish power industry has tried to reduce the emission of air contaminants to the atmosphere. The reduction is feasible on account of various methods of emission reduction, which have been advanced and applied for many years. The paper presents conventional fuels used in the Polish professional power industry, as well as the principal emission types occurring there for the last 10 years and the undertaken reduction measures

Social Interest in The Polish Doctrine of Monument Preservation

Science.gov (United States)

Antoszczyszyn, Marek

2017-10-01

The paper discusses a controversy surrounding the latest amendment to the text of the Polish Parliament Act Conservation and the Care of Monuments (2015). It is a common dictum that any edifice cannot exist without good foundations. In this particular case of the mentioned above Act, definition of monument appears to be such a basis. A social interest is one of the constituent elements of the definition mentioned above. In the first part of the paper the notion of the social interest expression has been discussed, particularly from national and international points of view. The second part of the paper comprises some examples from the Polish monument preservation experience with the use of comparison method supported by case study. Only three big Polish cities: Warsaw, Wroclaw and Szczecin are involved in the presented case study but it must be emphasized that many other places on Polish territory experienced the same. Basing on the faith of these cities, the results and discussion chapter proves fundamental discrepancy in social interest notion between national and international scopes using some analytical methods. Finally, in the discussion chapter some proposals for the future amendment of monument definition in the Act of Conservation and the Care of Monuments have been provided.

Scope of Nursing Care in Polish Intensive Care Units

Directory of Open Access Journals (Sweden)

Mariusz Wysokiński

2013-01-01

Full Text Available Introduction. The TISS-28 scale, which may be used for nursing staff scheduling in ICU, does not reflect the complete scope of nursing resulting from varied cultural and organizational conditions of individual systems of health care. Aim. The objective of the study was an attempt to provide an answer to the question what scope of nursing care provided by Polish nurses in ICU does the TISS-28 scale reflect? Material and Methods. The methods of working time measurement were used in the study. For the needs of the study, 252 hours of continuous observation (day-long observation and 3.697 time-schedule measurements were carried out. Results. The total nursing time was 4125.79 min. (68.76 hours, that is, 60.15% of the total working time of Polish nurses during the period analyzed. Based on the median test, the difference was observed on the level of χ2=16945.8, P<0.001 between the nurses’ workload resulting from performance of activities qualified into the TISS-28 scale and load resulting from performance of interventions within the scopes of care not considered in this scale in Polish ICUs. Conclusions. The original version of the TISS-28 scale does not fully reflect the workload among Polish nurses employed in ICUs.

Polish Qualitative Sociology. Insight into the future of postdisciplinary research

OpenAIRE

Konecki, Krzysztof

2014-01-01

The paper desctibes the definitions of following concepts: multidisiplinarity, interdisciplinarity, transdysciplinarity, postdisciplinarity. MOreover it discuss the meanings of a concept of discipline. It describes the place of the Polish qualitative sociology in the context of postdisciplinary research. The main question of paper is: Does the POlish Qualitative Sociology has entered the postdisciplinary phase of research? DGS, UL Krzysztof Konecki

Surface roughness of microparticulated and nanoparticulated composites after finishing and polishing procedures

Directory of Open Access Journals (Sweden)

Rosemary Arai Sadami Shinkai

Full Text Available Objective: To evaluated the surface roughness of one microparticulate resin composite Durafill (Heraeus Kulzer Weihrheim, Germany andfour nanoparticulate resins 4 Seasons (Ivoclar Vivadent, Schaan, Liechtenstein Esthet x (Dentsply, Milford, DE, USA, Point 4 and Supreme (3M-ESPE, Dental Products,St. Paul, MN, USA. Methods: After finishing with a diamond bur point (F, and polishing with silicone points of gray, green and pink color Politipit (Ivoclar Vivadent,Schaan, Liechtenstein, four stages of completion were performed, simulating one of finishing and three of polishing a resin restoration. Ten samples of each composite resin were measured for surface roughness with surface profilometer (Mitutoyo Corporation, Tokyo, Japan after each of finishing and polishing sequence.Results: The results showed that nanoparticulate and microparticulate resins presented a significant difference in the surface roughness values, in all finishing and polishing steps. Conclusion: Of the the nanoparticulate resins 4 Seasons (Ivoclar Vivadent, Schaan, Liechtenstein, Point 4 (Kerr CO, Orange, CA, USA, and also microparticulate Durafill (Heraeus Kulzer Weihrheim, Germany presented significantly lower surface roughness values after completing all the finishing and polishing stages.

Precision machining and polishing of scintillating crystals for large calorimeters and hodoscopes

International Nuclear Information System (INIS)

Wuest, C.R.; Fuchs, B.A.; Holdener, F.R.; Heck, J.L. Jr.

1994-04-01

New machining and polishing techniques have been developed for large scintillating crystal arrays such as the Barium Fluoride Electromagnetic Calorimeter for the GEM Detector at SSCL, the Crystal Clear Collaboration's cerium fluoride or lead tungstenate calorimeter at the proposed LHC and CERN, the PHENIX Detector at RHIC (barium fluoride), and the cesium iodide Calorimeter for the BaBar Detector at PEP-2 B Factory at SLAC. The machining and polishing methods to be presented in this paper provide crystalline surfaces without sub-surface damage or deformation as verified by Rutherford Back-scattering (RBS) analysis. Surface roughness of about 10--20 angstroms and sub-micron mechanical tolerances have been demonstrated on large barium fluoride crystal samples. Mass production techniques have also been developed for machining the proper angled surfaces and polishing up to five 50 cm long crystals at one time. These techniques utilize kinematic mount technology developed at LLNL to allow precision machining and polishing of complex surfaces. They will present this technology along with detailed surface studies of barium fluoride and cerium fluoride crystals polished with this technique

Low mercury levels in marine fish from estuarine and coastal environments in southern China

International Nuclear Information System (INIS)

Pan, Ke; Chan, Heidi; Tam, Yin Ki; Wang, Wen-Xiong

2014-01-01

This study is the first comprehensive evaluation of total Hg and methylmercury (MeHg) concentrations in wild marine fish from an estuarine and a coastal ecosystem in southern China. A total of 571 fish from 54 different species were examined. Our results showed that the Hg levels were generally low in the fish, and the Hg levels were below 30 ng g −1 (wet weight) for 82% of the samples, which may be related to the reduced size of the fish and altered food web structure due to overfishing. Decreased coastal wetland coverage and different carbon sources may be responsible for the habitat-specific Hg concentrations. The degree of biomagnification was relatively low in the two systems. -- Highlights: • Total and methylmercury in marine fish from estuarine and coastal ecosystems were compared. • Hg levels were generally low in the coastal wild fish in southern China. • Overfishing and decreased wetland coverage may be responsible for the low Hg concentration. • Stable isotopes signatures reveal that the two fish communities had contrasting trophic structures. -- Overfishing and habitat-specific geochemical properties are related to the low Hg concentrations in the wild fish

Using Virtualization to Integrate Weather, Climate, and Coastal Science Education

Science.gov (United States)

Davis, J. R.; Paramygin, V. A.; Figueiredo, R.; Sheng, Y.

2012-12-01

To better understand and communicate the important roles of weather and climate on the coastal environment, a unique publically available tool is being developed to support research, education, and outreach activities. This tool uses virtualization technologies to facilitate an interactive, hands-on environment in which students, researchers, and general public can perform their own numerical modeling experiments. While prior efforts have focused solely on the study of the coastal and estuary environments, this effort incorporates the community supported weather and climate model (WRF-ARW) into the Coastal Science Educational Virtual Appliance (CSEVA), an education tool used to assist in the learning of coastal transport processes; storm surge and inundation; and evacuation modeling. The Weather Research and Forecasting (WRF) Model is a next-generation, community developed and supported, mesoscale numerical weather prediction system designed to be used internationally for research, operations, and teaching. It includes two dynamical solvers (ARW - Advanced Research WRF and NMM - Nonhydrostatic Mesoscale Model) as well as a data assimilation system. WRF-ARW is the ARW dynamics solver combined with other components of the WRF system which was developed primarily at NCAR, community support provided by the Mesoscale and Microscale Meteorology (MMM) division of National Center for Atmospheric Research (NCAR). Included with WRF is the WRF Pre-processing System (WPS) which is a set of programs to prepare input for real-data simulations. The CSEVA is based on the Grid Appliance (GA) framework and is built using virtual machine (VM) and virtual networking technologies. Virtualization supports integration of an operating system, libraries (e.g. Fortran, C, Perl, NetCDF, etc. necessary to build WRF), web server, numerical models/grids/inputs, pre-/post-processing tools (e.g. WPS / RIP4 or UPS), graphical user interfaces, "Cloud"-computing infrastructure and other tools into a

Acoustic emission-based in-process monitoring of surface generation in robot-assisted polishing

DEFF Research Database (Denmark)

Pilny, Lukas; Bissacco, Giuliano; De Chiffre, Leonardo

2016-01-01

The applicability of acoustic emission (AE) measurements for in-process monitoring of surface generation in the robot-assisted polishing (RAP) was investigated. Surface roughness measurements require interruption of the process, proper surface cleaning and measurements that sometimes necessitate...... automatic detection of optimal process endpoint allow intelligent process control, creating fundamental elements in development of robust fully automated RAP process for its widespread industrial application....... removal of the part from the machine tool. In this study, stabilisation of surface roughness during polishing rotational symmetric surfaces by the RAP process was monitored by AE measurements. An AE sensor was placed on a polishing arm in direct contact with a bonded abrasive polishing tool...

Coastal Community Group for Coastal Resilient in Timbulsloko Village, Sayung, Demak Regency, Indonesia

Directory of Open Access Journals (Sweden)

Purnaweni Hartuti

2018-01-01

Full Text Available Coastal areas are very dynamic and fragile environment, demanding for policies to preserve these areas as materialized in the Resilient Coastal Development Program (PKPT by the Indonesian government. Amongst the targeted area was Timbulsloko Village in Sayung District, Demak Regency, which coastal areas is severely damaged by erosion. This article analyzed the development of the Coastal Community Group (CCG related to the PKPT program in Timbulsloko village, especially in how the group is empowered to increase the community’s resilient in facing the disaster. This study, applied an analytical descriptive method, used the development of the CCG as phenomenon. Primary data was collected through observation and in-depth interviews with stakeholders, accompanying the secondary data. The result shows that the PKPT funding was mostly spent on infrastructure development and used for project management, not for optimizing local economic empowerment. After the completion of the PKPT, there are no actions or following programs to keep the physical results constructed by the CCG. Accordingly, the orientation towards the CCG building capacity for Timbulsloko community’s ecological resilience had not been optimally implemented. This study recommended a "putting the last first" policy approach to preparing the local community. The government must play a stronger role in encouraging a self-help local group for strong human development

Effect of one-step polishing system on the color stability of nanocomposites.

Science.gov (United States)

Alawjali, S S; Lui, J L

2013-08-01

This study was to compare the effect of three different one-step polishing systems on the color stability of three different types of nanocomposites after immersion in coffee for one day and seven days and determine which nanocomposite material has the best color stability following polishing with each of the one-step polishing system. The nanocomposites tested were Tetric EvoCeram, Grandio and Herculite Précis. A total of 120 discs (40/nanocomposite, 8mm×2mm) were fabricated. Ten specimens for each nanocomposite cured under Mylar strips served as the control. The other specimens were polished with OptraPol, OneGloss and Occlubrush immersed in coffee (Nescafé) up to seven days. Color measurements were made with a spectrophotometer at baseline and after one and seven days. Two way repeated measure ANOVA, two way ANOVA and Bonferroni tests were used for statistical analyses (P<0.05). The immersion time was a significant factor in the discoloration of the nanocomposites. The effect of three one-step polishing systems on the color stability was also significant. The color change values of the materials cured against Mylar strips were the greatest. The lowest mean color change values were from the Occlubrush polished groups. The effect of the three different types of nanocomposite on the color change was significant. The highest color change values were with Tetric EvoCeram groups. The lowest color change values were with Herculite Précis groups. The color change of nanocomposite resins is affected by the type of composite, polishing procedure and the period of immersion in the staining agent. Copyright © 2012 Elsevier Ltd. All rights reserved.

Recovery of rare earths from used polishes by chemical vapor transport process

International Nuclear Information System (INIS)

Ozaki, T.; Machida, K.; Adachi, G.

1998-01-01

Full text: Rare earth oxide polishes are widely used in the glass industry because of its mechanical and chemical polishing action. The Japanese glass industry use 2000 tons per year of the polishes, and a large portion of them are thrown away after their polishing lifetime. A dry recovery processes for rare earths from the used polishes have been investigated by using a chemical vapor transport method via the formation of vapor complexes RAl n Cl 3+3n (R = rare earths). A flow type reactor with various temperature gradients was employed for the process. The used polishes were mixed with active carbon, and chlorinated with N 2 + Cl 2 mixture at 1273 K. Aluminium oxide were also chlorinated at lower temperature and the resulting AlCl 3 were introduced to the reactor. The rare earth chlorides and AlCl 3 were converted to the vapor complexes. These were driven along the temperature gradient, decomposed according to the reverse reaction, and regenerated RCl 3 . About 90 % of the used polish were chlorinated after 2 hours. Rare earth chlorides, AlCl 3 , and FeCl 3 were fully transported after 82 hours. The rare earth chlorides were mainly condensed over the temperature range 1263-903 K. On the other hand, AlCl 3 and FeCl 3 were deposited at the temperature range below 413 K. CaCl 2 and SrCl 2 were hardly transported and remained in the residue. When the temperature gradient with the smaller slope was used, mutual separation efficiencies among the rare earths was improved. The highest CeCl 3 purity of 80% was obtained in the process

Evaluation of one-step micro polishers for residual resin removal after debonding on fluorosed teeth

Directory of Open Access Journals (Sweden)

Padmalatha Challa

2014-01-01

Full Text Available Aim and objectives: To evaluate the effectiveness of one step micro polishers for residual resin removal on fluorosed teeth using scanning electron microscope (SEM. Methods and Material: 55 teeth with mild to moderate fluorosis were selected with five teeth as control. Metal brackets were bonded onto 50 teeth which were divided into 5 groups. The finishing and polishing methods which were tested include tungsten carbide burs (TCB, multistep finishing system (Sof-Lex, one step polishers (PoGo and combination of TCB with multistep and one step polishing systems. After resin removal, all the samples were examined under SEM for assessment of the enamel surface. Results: The enamel surface was closest to untouched enamel in samples finished with the PoGo one step polishers followed by Sof-Lex multistep finishing system. However, they took the longest time to finish. TCB required the shortest time for residual resin removal. Conclusions: All polishing systems produce a certain degree of damage to the enamel surface with the smoothest surface being produced by one step polishers on fluorosed teeth.

Chemical-mechanical polishing of metal and dielectric films for microelectronic applications

Science.gov (United States)

Hegde, Sharath

The demand for smaller, faster devices has led the integrated circuit (IC) industry to continually increase the device density on a chip while simultaneously reducing feature dimensions. Copper interconnects and multilevel metallization (MLM) schemes were introduced to meet some of these challenges. With the employment of MLM in the ultra-large-scale-integrated (ULSI) circuit fabrication technology, repeated planarization of different surface layers with tolerance of a few nanometers is required. Presently, chemical-mechanical planarization (CMP) is the only technique that can meet this requirement. Damascene and shallow trench isolation processes are currently used in conjunction with CMP in the fabrication of multilevel copper interconnects and isolation of devices, respectively, for advanced logic and memory devices. These processes, at some stage, require simultaneous polishing of two different materials using a single slurry that offers high polish rates, high polish selectivity to one material over the other and good post-polish surface finish. Slurries containing one kind of abrasive particles do not meet most of these demands due mainly to the unique physical and chemical properties of each abrasive. However, if a composite particle is formed that takes the advantages of different abrasives while mitigating their disadvantages, the CMP performance of resulting abrasives would be compelling. It is demonstrated that electrostatic interactions between ceria and silica particles at pH 4 can be used to produce composite particles with enhanced functionality. Zeta potential measurement and TEM images used for particle characterization show the presence of such composite particles with smaller shell particles attached onto larger core particles. Slurries containing ceria (core)/silica (shell) and silica (core)/ceria (shell) composite particles when used to polish metal and dielectric films, respectively, yield both enhanced metal and dielectric film removal rates

Mirror surface metrology and polishing for AXAF/TMA

International Nuclear Information System (INIS)

Slomba, A.; Babish, R.; Glenn, P.

1985-01-01

The achievement of the derived goals for mirror surface quality on the Advanced X-ray Astrophysics Facility (AXAF), Technology Mirror Assembly (TMA) required a combination of state-of-the-art metrology and polishing techniques. In this paper, the authors summarize the derived goals and cover the main facets of the various metrology instruments employed, as well as the philosophy and technique used in the polishing work. In addition, they show how progress was measured against the goals, using the detailed error budget for surface errors and a mathematical model for performance prediction. The metrology instruments represented a considerable advance on the state-of-the-art and fully satisfied the error budget goals for the various surface errors. They were capable of measuring the surface errors over a large range of spatial periods, from low-frequency figure errors to microroughness. The polishing was accomplished with a computer-controlled process, guided by the combined data from various metrology instruments. This process was also tailored to reduce the surface errors over the full range of spatial periods

Preparation of cerium oxide for lens polishing powder

International Nuclear Information System (INIS)

Injarean, Uthaiwan; Rodthongkom, Chouvana; Pichestapong, Pipat; Changkrurng, Kalaya

2003-10-01

Cerium is an element of rare earth group which is called lanthanide series. It is found in the ores like monazite and xenotime which are the tailings of tin mines in the south of Thailand. Cerium is used mostly as lens polishing powder besides the applications in other industries. In this study, cerium extracted from monazite ore breakdown by alkaline process was used for the preparation of lens polishing powder. Cerium hydroxide cake from the process was dissolved by hydrochloric acid and precipitated with oxalic acid. The oxalate precipitate then was calcined to oxide powder and its particle size was measured. Precipitation conditions being studied are concentration of feed cerium chloride solution, concentration of oxalic acid used for the precipitation, concentration of sulfuric acid used as precipitation control reagent and the precipitation temperature. It was found that the appropriate precipitation conditions yielded the fine oxide powder with particle size about 12μm. The oxide powder can be ground to the size of 1-3 μm which is suitable for making lens polishing powder

Floristic Quality Index of Restored Wetlands in Coastal Louisiana

Science.gov (United States)

2017-08-01

ER D C/ EL T R- 17 -1 5 Ecosystem Management and Restoration Research Program Floristic Quality Index of Restored Wetlands in Coastal...of Wisconsin Lake Plant Communities with Example Applications. Lake and Reservoir Management 15(2): 133-141. Rocchio, J. 2007. Floristic Quality ... quality in Ohio wetlands. Science of the Total Environment 551: (556-562). Steyer, G. D., and R. E. Stewart, Jr. 1992. Monitoring Program for Coastal

Vertical Transport by Coastal Mesoscale Convective Systems

Science.gov (United States)

Lombardo, K.; Kading, T.

2016-12-01

This work is part of an ongoing investigation of coastal mesoscale convective systems (MCSs), including changes in vertical transport of boundary layer air by storms moving from inland to offshore. The density of a storm's cold pool versus that of the offshore marine atmospheric boundary layer (MABL), in part, determines the ability of the storm to successfully cross the coast, the mechanism driving storm propagation, and the ability of the storm to lift air from the boundary layer aloft. The ability of an MCS to overturn boundary layer air can be especially important over the eastern US seaboard, where warm season coastal MCSs are relatively common and where large coastal population centers generate concentrated regions of pollution. Recent work numerically simulating idealized MCSs in a coastal environment has provided some insight into the physical mechanisms governing MCS coastal crossing success and the impact on vertical transport of boundary layer air. Storms are simulated using a cloud resolving model initialized with atmospheric conditions representative of a Mid-Atlantic environment. Simulations are run in 2-D at 250 m horizontal resolution with a vertical resolution stretched from 100 m in the boundary layer to 250 m aloft. The left half of the 800 km domain is configured to represent land, while the right half is assigned as water. Sensitivity experiments are conducted to quantify the influence of varying MABL structure on MCS coastal crossing success and air transport, with MABL values representative of those observed over the western Mid-Atlantic during warm season. Preliminary results indicate that when the density of the cold pool is much greater than the MABL, the storm successfully crosses the coastline, with lifting of surface parcels, which ascend through the troposphere. When the density of the cold pool is similar to that of the MABL, parcels within the MABL remain at low levels, though parcels above the MABL ascend through the troposphere.

Infestation of Polish Agricultural Soils by Plasmodiophora Brassicae Along The Polish-Ukrainian Border

Directory of Open Access Journals (Sweden)

Jędryczka Małgorzata

2014-07-01

Full Text Available There has been a rapid, worldwide increase in oilseed rape production that has resulted in enormous intensification of oilseed rape cultivation, leading to tight rotations. This in turn, has caused an accumulation of pests as well as foliar and soil-borne diseases. Recently, clubroot has become one of the biggest concerns of oilseed rape growers. Clubroot is caused by the soil-borne protist Plasmodiophora brassicae Woronin. The pathogen may be present in groundwater, lakes, and irrigation water used in sprinkling systems. It can be easily transmitted from one field to another not only by water, but also by soil particles and dust transmitted by wind and on machinery. The aim of our overall study was to check for P. brassicae infestation of Polish agricultural soils. This paper presents the 2012 results of a study performed along the Polish-Ukrainian border in two provinces: Lublin (Lubelskie Voivodeship and the Carpathian Foothills (Podkarpackie Voivodeship, in south-east Poland. Monitoring was done in 11 counties, including nine rural and two municipal ones. In total, 40 samples were collected, out of which 36 were collected from fields located in rural areas and four from municipal areas, with two per municipal region. Each sample was collected at 8-10 sites per field, using a soil auger. The biotest to detect the presence of P. brassicae was done under greenhouse conditions using seedlings of the susceptible Brassicas: B. rapa ssp. pekinensis and the Polish variety of oilseed rape B. napus cv. Monolit. Susceptible plants grown in heavily infested soils produced galls on their roots. A county was regarded as free from the pathogen, if none of the bait plants became infected. The pathogen was found in three out of 40 fields monitored (7.5% in the Carpathian Foothill region. The fields were located in two rural counties. The pathogen was not found in Lublin province, and was also not detected in any of the municipal counties. The detection with

Long Distance Solidarity: Polish Public Opinion and the Boer War 1899–1902

Directory of Open Access Journals (Sweden)

Szlanta Piotr

2017-06-01

Full Text Available The bloody conflict which was taking place in South Africa in the years 1899-1902 was followed with a great interest by Polish public opinion. Its greatest part strongly sympathized with the Boer republics. Their burgers were idealized and presented by the Polish press as brave fighters for independence, who dared to stand up against the world empire to defend their rights while Great Britain was attributed full responsibility for the outbreak of the war. For many Poles the Boers personified the general idea of freedom fighters and symbolized all suppressed nations. Their sad fate seemed to be quite similar to the Polish one and this similarity was the main source of sympathy toward defenders of the Transvaal and Free Orange State. Voices of few Polish intellectuals, who called for a more objective and not so emotional view on the war, could not change the pro-Boers stance of the greatest part of Polish public opinion.

Efficacy of polishing kits on the surface roughness and color stability ...

African Journals Online (AJOL)

Objective: Different polishing kits may have different effects on the composite resin surfaces. The aim of this study was to evaluate the surface roughness and color stability of four different composites which was applied different polishing technique. Materials and Methods: Thirty specimens were made for each composite ...

Depositional Architecture of Late Pleistocene-Holocene Coastal Alluvial-fan System in the Coastal Range, Taiwan

Science.gov (United States)

Chen, S. T.; Chen, W. S.

2016-12-01

Since late Pleistocene, the Coastal Range (Philippine Sea plate) collided and overridden on the Central Range (Eurasian Plate) along the Longitudinal Valley Fault. Therefore, the Coastal Range is exposed widely the late Pleistocene-Holocene marine and fluvial terraces caused by the tectonic uplift. Based on the estimation of paleosea-level elevations (Δh), depositional paleodepth, altitude distribution of Holocene deposits (D), altitude of outcrops (H), and 14C dating of marine deposits (t), the uplift rate (=(Δh+H +d-D)/t) is about 5-10 mm/yr in the southern Coastal Range. In this study, we suggest through field logging that the deposits can be divided into alluvial, foreshore (intertidal), shoreface, and offshore environments. In Dulan area in the southern Coastal Range, the uplift rate was 6-7 mm/yr during 16,380-10,000 cal yr BP and 3-4 mm/yr after 7,000 cal yr BP. Results from the Dulan Coastal alluvial-fan system can be divided into five depositional stages: (1) 16,380-14,300 cal yr BP: The rate of global sea level rise (SLR) has averaged about 6-7 mm/yr, similar to the tectonic uplift rate. In this stage, the bedrock was eroded and formed a wide wave-cut platform. (2) 14,300-10,000 cal yr BP: SLR of about 14 mm/yr that was faster than tectonic uplift rate of 6-7 mm/yr. As a result of transgression, the beach-lagoon deposits about 5 m thick were unconformably overlain on the wave-cut platform. (3) 10,000-8,200 cal yr BP: The ongoing sea level rise (SLR: 11 mm/yr), the lagoon deposits were overlain by an offshore slump deposits representing a gradual deepening of the depositional environment. (4) 8,200-7,930 cal yr BP (SLR: 6-7 mm/yr): The tectonic uplift rate may occur at similar SLR. The alluvial-fan deposits have prograded over the shallow marine deposits. (5) After 7,000 cal yr BP (SLR: 1-0 mm/yr): SLR was much slower than tectonic uplift rate of 3-4 mm/yr. Thus, Holocene marine terraces are extensively developed in the coastal region, showing that the

Research status in ultra-precision machining of silicon carbide parts by oxidation-assisted polishing

Directory of Open Access Journals (Sweden)

Xinmin SHEN

2016-10-01

Full Text Available Oxidation-assisted polishing is an important machining method for obtaining SiC parts with high precision. Through plasma oxidation, thermal oxidation, and anodic oxidation, soft oxide can be obtained on the RS-SiC substrate. With the assistance of abrasive polishing to remove the oxide rapidly, the material removal rate can be increased and the surface quality can be improved. The research results indicate that the surface roughness root-mean-square (RMS and roughness-average (Ra can reach 0.626 nm and 0.480 nm by plasma oxidation-assisted polishing; in thermal oxidation-assisted polishing, the RMS and Ra can be 0.920 nm and 0.726 nm; in anodic oxidation, the calculated oxidation rate is 5.3 nm/s based on Deal-Grove model, and the RMS and Ra are 4.428 nm and 3.453 nm respectively in anodic oxidation-assisted polishing. The oxidation-assisted polishing can be propitious to improve the process level in machining RS-SiC, which would promote the application of SiC parts in optics and ceramics fields.

Summary of Synthetic Lap Polishing Experiments at LLNL, FY95

International Nuclear Information System (INIS)

Nichols, M A

2001-01-01

The purpose of this research was to support the optics finishing development work for the NIF, the National Ignition Facility. One of the major expenses for the construction of NIF is the cost of finishing of the large aperture optics. One way to significantly reduce the cost of the project is to develop processes to reduce the amount of time necessary to polish the more than 3,000 amplifier slabs. These slabs are rectangular with an aspect ratio of more than twenty to one and are made of a very temperature sensitive glass, Nd doped phosphate laser glass. As a result of this effort, we could potentially reduce the time necessary to polish each surface of an amplifier from 20-30 hours of run time to under an hour to achieve the same removal and still maintain a flatness of between one to three waves concave figure. We also feel confident that we can polish rectangular thermally sensitive glass flat by use of temperature control of the polishing platen, pad curvature, slurry concentration with temperature control, pad rotation, and pressure; although further, larger scale experiments are necessary to gain sufficient confidence that such a procedure could be successfully fielded

Mechanisms and risk of cumulative impacts to coastal ecosystem services: An expert elicitation approach

KAUST Repository

Singh, Gerald G.; Sinner, Jim; Ellis, Joanne; Kandlikar, Milind; Halpern, Benjamin S.; Satterfield, Terre; Chan, Kai M.A.

2017-01-01

Coastal environments are some of the most populated on Earth, with greater pressures projected in the future. Managing coastal systems requires the consideration of multiple uses, which both benefit from and threaten multiple ecosystem services

New surface modification method of bio-titanium alloy by EB polishing

International Nuclear Information System (INIS)

Okada, Akira; Uno, Yoshiyuki; Iio, Atsuo; Fujiwara, Kunihiko; Doi, Kenji

2008-01-01

A new surface modification for bio-titanium alloy products by electron beam (EB) polishing is proposed. In this EB polishing method, high energy density EB can be irradiated without concentrating the beam. Therefore, large-area EB with a maximum diameter of 60 mm can be used for instantaneously melting or evaporating metal surface. Experimental results made it clear that surface characteristics, such as repellency, corrosion resistance and coefficient of friction could be improved simultaneously with the surface smoothing in a few minutes under a proper condition. Therefore, EB polishing method has a possibility of high efficient surface smoothing and surface modification process for bio-titanium alloy. (author)

New insight into defining the lakes of the southern Baltic coastal zone.

Science.gov (United States)

Cieśliński, Roman; Olszewska, Alicja

2018-01-29

There exist many classification systems of hydrographic entities such as lakes found along the coastlines of seas and oceans. Each system has its advantages and can be used with some success in the area of protection and management. This paper aims to evaluate whether the studied lakes are only coastal lakes or rather bodies of water of a completely different hydrological and hydrochemical nature. The attempt to create a new classification system of Polish coastal lakes is related to the incompleteness of lake information in existing classifications. Thus far, the most frequently used are classifications based solely on lake basin morphogenesis or hydrochemical properties. The classifications in this paper are based not only on the magnitude of lake water salinity or hydrochemical analysis but also on isolation from the Baltic Sea and other sources of water. The key element of the new classification system for coastal bodies of water is a departure from the existing system used to classify lakes in Poland and the introduction of ion-"tracking" methods designed to identify anion and cation distributions in each body of water of interest. As a result of the work, a new classification of lakes of the southern Baltic Sea coastal zone was created. Featured objects such as permanently brackish lakes, brackish lakes that may turn into freshwater lakes from time to time, freshwater lakes that may turn into brackish lakes from time to time, freshwater lakes that experience low levels of salinity due to specific incidents, and permanently freshwater lakes. The authors have adopted 200 mg Cl -  dm -3 as a maximum value of lake water salinity. There are many conditions that determine the membership of a lake to a particular group, but the most important is the isolation lakes from the Baltic Sea. Changing a condition may change the classification of a lake.

Family Enterprises in Polish Consumers' Mindset in the Light of International Tendencies

Directory of Open Access Journals (Sweden)

Joanna Bednarz

2017-07-01

Full Text Available Aim/purpose - The main aim of the paper is to fill in the gap in the existing literature as well as to propose a set of specific family enterprises' (FE attributes concerning certain socioeconomic conditions in Poland. The objectives of the article are interrelated with two theses. H1 assumes that in current literature there is a little attention paid to the demand side of the market, particularly to the individual consumers (including young buyers and their attitudes toward FEs. H2 indicates that the perception of Polish FEs changes considerably reflecting the international trends. Design/methodology/approach - The authors studied a consolidated profound review of recent international and Polish publications on FEs. The expert interviews and in-depth individual interviews were conducted. Both empirical studies brought a preliminary insight into overall consumer perception of the FEs in Poland. Findings - For several years Polish buyers have been dynamically changing their mindset, breaking the stereotype of FEs' owners. Nowadays, tradition and quality are two attributes which are associated closely with Polish FEs. Customers indicate that FEs are trustworthy, responsible, solid and dependable. They also highlight the ethnocentric attitude toward these companies - Polishness. All these attributes are evidently appreciated. FEs are correlated with traditional industries and products, especially with groceries, cosmetics, clothes, shoes, jewelry, furniture, windows and doors. Research implications/limitations - The identity of FEs is not always communicated properly. Consumers often cannot ascertain a provenance of their offer as many FEs do not emphasize their family identity. Additionally, on the Polish market, consumers are occasionally misled considering the family ownership of a business. Originality/value/contribution - The studies indicate a set of attributes typical of Polish FEs underpinning their strong identity which should be

Patterns of Arbuscular Mycorrhizal Fungal Distribution on Mainland and Island Sandy Coastal Plain Ecosystems in Brazil.

Science.gov (United States)

da Silva, Iolanda Ramalho; de Souza, Francisco Adriano; da Silva, Danielle Karla Alves; Oehl, Fritz; Maia, Leonor Costa

2017-10-01

Although sandy coastal plains are important buffer zones to protect the coast line and maintain biological diversity and ecosystem services, these ecosystems have been endangered by anthropogenic activities. Thus, information on coastal biodiversity and forces shaping coastal biological diversity are extremely important for effective conservation strategies. In this study, we aimed to compare arbuscular mycorrhizal (AM) fungal communities from soil samples collected on the mainland and nearby islands located in Brazilian sandy coastal plain ecosystems (Restingas) to get information about AM fungal biogeography and identify factors shaping these communities. Soil samples were collected in 2013 and 2014 on the beachfront of the tropical sandy coastal plain at six sites (three island and three mainland locations) across the northeast, southeast, and south regions of Brazil. Overall, we recorded 53 AM fungal species from field and trap culture samples. The richness and diversity of AM fungal species did not differ between mainland and island locations, but AM fungal community assemblages were different between mainland and island environments and among most sites sampled. Glomeromycota communities registered from island samples showed higher heterogeneity than communities from mainland samples. Sandy coastal plains harbor diverse AM fungal communities structured by climatic, edaphic, and spatial factors, while the distance from the colonizing source (mainland environments) does not strongly affect the AM fungal communities in Brazilian coastal environments.

Polishers around the globe: an overview on the market of large astronomical mirrors

Science.gov (United States)

Döhring, Thorsten

2014-07-01

Astronomical mirrors are key elements in modern optical telescopes, their dimensions are usually large and their specifications are demanding. Only a limited number of skilled companies respectively institutions around the world are able to master the challenge to polish an individual astronomical mirror, especially in dimensions above one meter. This paper presents an overview on the corresponding market including a listing of polishers around the globe. Therefore valuable information is provided to the astronomical community: Polishers may use the information as a global competitor database, astronomers and project managers may get more transparency on potential suppliers, and suppliers of polishing equipment may learn about unknown potential customers in other parts of the world. An evaluation of the historical market demand on large monolithic astronomical mirrors is presented. It concluded that this is still a niche market with a typical mean rate of 1-2 mirrors per year. Polishing of such mirrors is an enabling technology with impact on the development of technical know-how, public relation, visibility and reputation of the supplier. Within a corresponding technical discussion different polishing technologies are described. In addition it is demonstrated that strategic aspects and political considerations are influencing the selection of the optical finisher.

Study on combined polishing process of aspherical aluminum mirrors

Science.gov (United States)

Deng, Jinqiu; Peng, Xiaoqiang; Hu, Hao; Ge, Kunpeng

2017-10-01

The aluminum mirrors are widely used as important optical components in some vital fields such as astronomical instruments or military installations due to the unique advantages of aluminum alloy. In order to simplify the structure of optical system and improve the performance at the same time, it's a tendency that the optics will be designed to aspherical or other freeform shapes. However, the traditional techniques are falling to have adequate abilities to deal with the increasing demands of aluminum optics. For example, the tool marks leaved on the surface from single point diamond turning (SPDT) has obvious adverse effects to optical system. The deterministic and sub-aperture polishing process has showed the potential to fabricate complex shapes over the few years. But it's still recognized as a problem to polish bare aluminum directly because of its soft surface and active chemical characteristics. Therefore, a combination of magnetorheological finishing (MRF) and small tool polishing (STP) is applied to obtain high performance aluminum optics in this paper. A paraboloid aluminum mirror was polished with this proposed method, and the results showed that the surface texture of the sample is restrained from rms 0.409λ (λ=632.8nm) to rms 0.025λ, and the surface roughness is improved from average Ra 6 7nm to Ra 3 4nm.

Heavy Metal Contamination of Popular Nail Polishes in Iran

Directory of Open Access Journals (Sweden)

Golnaz Karimi

2015-06-01

Full Text Available Background: Toxic and hazardous heavy metals like arsenic, lead, mercury, zinc, chromium and iron are found in a variety of personal care products, e.g. lipstick, whitening toothpaste, eyeliner and nail color. The nails absorb the pigments of nail polishes and vaporized or soluble metals can easily pass it. The goal of this survey was to assess whether the different colors of nail polishes comply with maximum concentrations of heavy metals in the EPA’s guidelines. Methods: 150 samples of different popular brands of nail polishes in 13 colors (yellow, beige, silver, pink, white, violet, brown, golden, green, black, colorless, red and blue were randomly purchased from beauty shops in Tehran City, Iran, in 2014. Microwave digestion EPA method 3051 was used by a microwave oven to determine the amount of 5 heavy metals; Nickel, Chromium, Lead, Arsenic and Cadmium. One-way ANOVA, Two-way ANOVA, hierarchical cluster, and principal component analyses were applied by Statistica 7.0 software. Results: The concentrations of chrome, lead, nickel and arsenic showed significant differences between the colors (p<0.05. In all studied samples, the level of cadmium was beyond the safe maximum permissible limit (MPS, but no significance difference in the cadmium content was identified. Conclusion: Due to the high concentrations of toxic metals in many brands of nail polishes, meticulous quality control is recommended for these beauty products.

Holocaust Education in Polish Public Schools: Between Remembrance and Civic Education

Science.gov (United States)

Milerski, Boguslaw

2010-01-01

This article analyzes the historical and political context of Holocaust education, and its implementation in Polish schools. Perceptions of the Holocaust continue to change, influenced by Poland's social and political situation. The Polish historical context is quite specific; it includes the long history of Poles and Jews as neighbors, with local…

Prominent artificial radionuclide activity in the environment of coastal Karnataka on the southwest coast of India

Energy Technology Data Exchange (ETDEWEB)

Narayana, Y. [Department of Studies in Physics, Mangalore University, Mangalagangotri-574 199 (India)]. E-mail: narayanay@yahoo.com; Somashekarappa, H.M.; Karunakara, N.; Avadhani, D.N.; Mahesh, H.M.; Siddappa, K. [Department of Studies in Physics, Mangalore University, Mangalagangotri-574 199 (India)

2000-09-01

Studies on radiation level and radionuclide distribution in the environment of coastal Karnataka were undertaken to provide baseline data for the future assessment of the impact of the nuclear and thermal power stations that are being set up in the region and to understand the behaviour of radionuclides in the environment. As part of the programme the concentrations of two important artificial radionuclides, namely {sup 90}Sr and {sup 137}Cs, have been measured in a number of environmental samples. The concentration of {sup 90}Sr is very low in most of the samples. Among the samples analysed for the concentration of {sup 137}Cs, soil samples showed elevated levels of activity in some sampling stations. Among the vegetables, brinjal (Solanum melongena. L) showed considerable activity. The internal dose due to intake of {sup 90}Sr through diet was 0.42 {mu}Sv year{sup -1} for the vegetarian population and 0.32 {mu}Sv year{sup -1} for the non-vegetarian population. The internal dose due to dietary intake of {sup 137}Cs was found to be 0.34 {mu}Sv year{sup -1} and 0.26 {mu}Sv year{sup -1} respectively for the vegetarian and non-vegetarian population. The results are discussed in the light of the literature values reported for other environs of India and abroad and appropriate inferences are drawn. (author)

Polish Standard of the Technical Safety of Transmission Gas Pipelines

International Nuclear Information System (INIS)

Tkacz, A.J.

2006-01-01

The document is presenting the idea of the CNGI Norm called The Polish Standard of the Technical Safety of Transmission Gas Pipelines and the way of using it by companies associated in the Chamber of the Natural Gas Industry in the business activity. It will be applied to improve the quality and reliability of gas transmission after full opening of Polish natural gas market. (author)

Reusing Ceramic Tile Polishing Waste In Paving Block Manufacturing

OpenAIRE

Giordano Penteado; Carmenlucia Santos; de Carvalho; Eduardo Viviani; Cecche Lintz; Rosa Cristina

2016-01-01

Ceramic companies worldwide produce large amounts of polishing tile waste, which are piled up in the open air or disposed of in landfills. These wastes have such characteristics that make them potential substitutes for cement and sand in the manufacturing of concrete products. This paper investigates the use of ceramic tile polishing waste as a partial substitute for cement and sand in the manufacturer of concrete paving blocks. A concrete mix design was defined and then the sand was replaced...

IDENTITY AND NEGOTIATION OF BOUNDARIES AMONG YOUNG POLISH JEWS

OpenAIRE

Cukras-Stelągowska, Joanna

2015-01-01

In this chapter, I would like to look at the processes of building the cultural identity of the young generation of Polish Jews, primarily including the models of constructing modern identifications with the Polish society, the Jewish people and the State of Israel. I will present the results of my own studies, and of those conducted by a few other young researchers dealing with these issues. My main theoretical sources are within the interpretive paradigm. The research methodology was based ...

Coastal new particle formation: environmental conditions and aerosol physicochemical characteristics during nucleation bursts

NARCIS (Netherlands)

O'Dowd, C.D.; Haemeri, K.; Maekelae, J.M.; Vaekeva, M.; Aalto, P.; Leeuw, G. de; Kunz, G.J.; Becker, E.; Hansson, H-C.; Allen, A.G.; Harrison, R.M.; Berresheim, H.; Kleefeld, C.; Geever, M.; Jennings, S.G.; Kulmala, M.

2002-01-01

Nucleation mode aerosol was characterized during coastal nucleation events at Mace Head during intensive New Particle Formation and Fate in the Coastal Environment (PARFORCE) field campaigns in September 1998 and June 1999. Nucleation events were observed almost on a daily basis during the

Research on Grinding and Polishing Force Control of Compliant Flange

Directory of Open Access Journals (Sweden)

Li Chuang

2015-01-01

Full Text Available The automation of the grinding and polishing process is important to improve the production efficiency of the part surfaces. In this paper, a new compliant flange mounted on the end of the industrial robots for the robotic grinding and polishing force control is developed. With regard to the non-linear and time-varying problem of the contact force, the mathematical model of the new force control system was presented and the fuzzy PID control strategy was used to drive the proposed system. Especially, the air spring and electric proportional valve is studied to establish the model. The simulation results show that the selected control strategy has quick response and good robustness, which satisfies the real-time requirements of the grinding and polishing force control in processing.

Changes of hydrological environment and their influences on coastal wetlands in the southern Laizhou Bay, China.

Science.gov (United States)

Zhang, Xuliang; Zhang, Yuanzhi; Sun, Hongxia; Xia, Dongxing

2006-08-01

The structure and function of the coastal wetland ecosystem in the southern Laizhou Bay have been changed greatly and influenced by regional hydrological changes. The coastal wetlands have degraded significantly during the latest 30 years due to successive drought, decreasing of runoff, pollution, underground saline water intrusion, and aggravating marine disasters such as storm tides and sea level rising. Most archaic lakes have vanished, while artificial wetlands have been extending since natural coastal wetlands replaced by salt areas and ponds of shrimps and crabs. The pollution of sediments in inter-tidal wetlands and the pollution of water quality in sub-tidal wetlands are getting worse and therefore "red tides" happen more often than before. The biodiversity in the study area has been decreased. Further studies are still needed to protect the degraded coastal wetlands in the area.

Single and combined metal contamination in coastal environments in China: current status and potential ecological risk evaluation.

Science.gov (United States)

Manzoor, Romana; Zhang, Tingwan; Zhang, Xuejiao; Wang, Min; Pan, Jin-Fen; Wang, Zhumei; Zhang, Bo

2018-01-01

With the development of industrialization and urbanization, metal and metalloid pollution is one of the most serious environmental problems in China. Current contamination status of metals and metalloid and their potential ecological risks along China's coasts were reviewed in the present paper by a comprehensive study on metal contents in marine waters and sediments in the past few decades. The priority metals/metalloid cadmium (Cd), mercury (Hg), chromium (Cr), lead (Pb), and arsenic (As), which were the target elements of the designated project "Comprehensive Prevention and Control of Heavy Metal Pollution" issued by the Chinese government in 2011, were selected considering their high toxicity, persistence, and prevalent existence in coastal environment. Commonly used environmental quality evaluation methods for single and combined metals were compared, and we accordingly suggest the comprehensive approach of joint utilization of the Enrichment Factor and Effect Range Median combined with Pollution Load Index and Mean Effect Range Median Quotient (EEPME); this battery of guidelines may provide consistent, internationally comparable, and accurate understanding of the environment pollution status of combined metals/metalloid and their potential ecological risk.

Cleansing orthodontic brackets with air-powder polishing: effects on frictional force and degree of debris.

Science.gov (United States)

Leite, Brisa Dos Santos; Fagundes, Nathalia Carolina Fernandes; Aragón, Mônica Lídia Castro; Dias, Carmen Gilda Barroso Tavares; Normando, David

2016-01-01

Debris buildup on the bracket-wire interface can influence friction. Cleansing brackets with air-powder polishing can affect this process. The aim of this study was to evaluate the frictional force and amount of debris remaining on orthodontic brackets subjected to prophylaxis with air-powder polishing. Frictional force and debris buildup on the surface of 28 premolar brackets were evaluated after orthodontic treatment. In one hemiarch, each bracket was subjected to air-powder polishing (n = 14) for five seconds, while the contralateral hemiarch (n = 14) served as control. Mechanical friction tests were performed and images of the polished bracket surfaces and control surfaces were examined. Wilcoxon test was applied for comparative analysis between hemiarches at p Brackets that had been cleaned with air-powder polishing showed lower friction (median = 1.27 N) when compared to the control surfaces (median = 4.52 N) (p orthodontic brackets with air-powder polishing significantly reduces debris buildup on the bracket surface while decreasing friction levels observed during sliding mechanics.

Toward a community coastal sediment transport modeling system: the second workshop

Science.gov (United States)

Sherwood, Christopher R.; Harris, Courtney K.; Geyer, W. Rockwell; Butman, Bradford

2002-01-01

Models for transport and the long-term fate of particles in coastal waters are essential for a variety of applications related to commerce, defense, public health, and the quality of the marine environment. Examples include: analysis of waste disposal and transport and the fate of contaminated materials; evaluation of burial rates for naval mines or archaeological artifacts; prediction of water-column optical properties; analysis of transport and the fate of biological particles; prediction of coastal flooding and coastal erosion; evaluation of impacts of sea-level or wave-climate changes and coastal development; planning for construction and maintenance of navigable waterways; evaluation of habitat for commercial fisheries; evaluation of impacts of natural or anthropogenic changes in coastal conditions on recreational activities; and design of intakes and outfalls for sewage treatment, cooling systems, and desalination plants.

Modeling the impacts of wildfire on runoff and pollutant transport from coastal watersheds to the nearshore environment.

Science.gov (United States)

Morrison, Katherine D; Kolden, Crystal A

2015-03-15

Wildfire is a common disturbance that can significantly alter vegetation in watersheds and affect the rate of sediment and nutrient transport to adjacent nearshore oceanic environments. Changes in runoff resulting from heterogeneous wildfire effects are not well-understood due to both limitations in the field measurement of runoff and temporally-limited spatial data available to parameterize runoff models. We apply replicable, scalable methods for modeling wildfire impacts on sediment and nonpoint source pollutant export into the nearshore environment, and assess relationships between wildfire severity and runoff. Nonpoint source pollutants were modeled using a GIS-based empirical deterministic model parameterized with multi-year land cover data to quantify fire-induced increases in transport to the nearshore environment. Results indicate post-fire concentration increases in phosphorus by 161 percent, sediments by 350 percent and total suspended solids (TSS) by 53 percent above pre-fire years. Higher wildfire severity was associated with the greater increase in exports of pollutants and sediment to the nearshore environment, primarily resulting from the conversion of forest and shrubland to grassland. This suggests that increasing wildfire severity with climate change will increase potential negative impacts to adjacent marine ecosystems. The approach used is replicable and can be utilized to assess the effects of other types of land cover change at landscape scales. It also provides a planning and prioritization framework for management activities associated with wildfire, including suppression, thinning, and post-fire rehabilitation, allowing for quantification of potential negative impacts to the nearshore environment in coastal basins. Copyright © 2014 Elsevier Ltd. All rights reserved.

Research on Laser Micro Polishing of SLS Technology Sintered Iron-Based Powder Surface

OpenAIRE

Gerda Vaitkūnaitė; Vladislav Markovič; Olegas Černašėjus

2015-01-01

The article analyzes laser micro polishing of 1.2083 steel samples produced applying selective laser sintering (SLS) method. The study has evaluated the distribution of the shape, size and temperature of the laser beam treated area in the surface layer of sintered and laser polished samples. Experimental tests have shown the impact of the technical parameters of laser micro polishing on the width and hardness of the impact zone of the treated sample. The microstructure analysis of laser treat...

Polish credit institutions within the European Union: a cross-country survey

Directory of Open Access Journals (Sweden)

Mariusz Dybał

2011-06-01

Full Text Available The paper presents an analysis of the Polish financial system, with regard to both the number of financial institutions and their assets over the last two decades. Data on the structure of household assets are also presented. According to the study, banks are the most important institutions in the Polish financial system. Analyzed in order to compare Polish credit institutions with all other members of the European Union were total assets of credit institutions, assets of the 25 largest banks in the European Union, as well as in Central and East Europe, share of the five largest credit institutions in total assets (CR5, asset share of credit institutions with majority foreign equity ownership, number of credit institutions, number of local units (branches, number of residents per credit institution local unit, number of employees of credit institutions, assets of credit institutions per employee and GDP per capita in PPS. The data demonstrate that over the past decade Polish credit institutions have largely strengthened their position within the European Union.

Estimation of Potential Evapotranspiration for a Coastal Savannah ...

African Journals Online (AJOL)

Estimation of Potential Evapotranspiration for a Coastal Savannah Environment: ... model which is the recommended standard method for estimating PET. ... model (r = 0.82) and requires only air temperature measurements as in-puts.ac ...

Task-specific sensor settings for electro-optical systems in a marine environment

NARCIS (Netherlands)

Schwering, P.B.W.; Broek, S.P. van den; Kemp, R.A.W.; Lensen, H.A.

2010-01-01

Present-day naval operations take place in coastal environments as well as narrow straits all over the world. Coastal environments around the world are exhibiting a number of threats to naval forces. In particular, a large number of asymmetric threats can be present in environments with cluttered

The Factor Structure of the Polish-Language Version of the Romantic Beliefs Scale

Directory of Open Access Journals (Sweden)

Katarzyna Adamczyk

2014-07-01

Full Text Available The aim of the present study was to investigate the factor structure and psychometric properties of the Polish adaptation of Romantic Beliefs Scale (RBS; Sprecher & Metts, 1989. In a sample of 414 Polish university students aged 19-25 (227 females and 187 males, the factor structure of the original English version was confirmed for the four subscales: Love Finds a Way, One and Only, Idealization, and Love at First Sight. The present study provides evidence that the 15-item version of the Polish adaptation of the (RBS possesses a factor structure and psychometric properties comparable to the English-language version of RBS. It was shown to be a reliable self-report measure for romantic beliefs within a sample of the Polish population. The development of a new Polish measure of romantic beliefs has provided further validation for the RBS, and provided evidence in support of the ideology of romanticism in various populations, and indicated the importance of differentiating between the different types of romantic beliefs.

[Comparison of surface roughness of nanofilled and microhybrid composite resins after curing and polishing].

Science.gov (United States)

Jiang, Hong; Lv, Da; Liu, Kailei; Zhang, Weisheng; Yao, Yao; Liao, Chuhong

2014-05-01

To compare the surface roughness of nanofilled dental composite resin and microhybrid composite resins after curing and polishing. A nanofilled composite (Z350) and 4 microhybrid composites (P60, Z250, Spectrum, and AP-X) were fabricated from the lateral to the medial layers to prepare 8 mm×8 mm×5 mm cubical specimens. The 4 lateral surfaces of each specimens were polished with abrasive disks (Super-Snap). Profilometer was used to test the mean surface roughness (Ra) after polishing. P60 had the lowest Ra (0.125∓0.030 µm) followed by Z250 and Spectrum. The Ra of Z350 (0.205∓0.052 µm) was greater than that of the other 3 resins, and AP-X had the roughest surfaces. Under scanning electron microscope, the polished faces of P60 resin were characterized by minor, evenly distributed particles with fewer scratches; the polished faces of Z350 presented with scratches where defects of the filling material could be seen. The nanofilled composite Z350 has smooth surface after polishing by abrasive disks, but its smoothness remains inferior to that of other micro-hybrid composite resins.

Laser polishing for topography management of accelerator cavity surfaces

Energy Technology Data Exchange (ETDEWEB)

Zhao, Liang [College of William and Mary, Williamsburg, VA (United States); Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Klopf, J. Mike [College of William and Mary, Williamsburg, VA (United States); Reece, Charles E. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Kelley, Michael J. [College of William and Mary, Williamsburg, VA (United States); Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

2015-07-20

Improved energy efficiency and reduced cost are greatly desired for advanced particle accelerators. Progress toward both can be made by atomically-smoothing the interior surface of the niobium superconducting radiofrequency accelerator cavities at the machine's heart. Laser polishing offers a green alternative to the present aggressive chemical processes. We found parameters suitable for polishing niobium in all surface states expected for cavity production. As a result, careful measurement of the resulting surface chemistry revealed a modest thinning of the surface oxide layer, but no contamination.

The challenges of coastal oceanography. Prediction limits and new applications based on Sentinel data

Science.gov (United States)

Sánchez-Arcilla, Agustín; Carniel, Sandro; Badger, Merete; Bidlot, Jean; Boye Hansen, Lars; Bolaños-Sanchez, Rodolfo; Cipollini, Paolo; Espino, Manuel; Marcello Miglietta, Mario; Saulter, Andy; Staneva, Joanna

2017-04-01

The increasing quality and quantity (resolution in space, coverage in time, combinations of sensors in the Sentinel family) of information provided by Copernicus offer the possibility to analyse and predict coastal meteo-oceanography at an unprecedented level. This is a unique opportunity to develop the Copernicus coastal dimension to tackle the pressures of increasing population and activities. The combination of ocean/atmosphere/land observations from the Sentinel (S) 1/2/3, aligned with the availability of an increasing number of high-resolution numerical simulations (e.g. wave and current fields) in the Copernicus Marine Environment Monitoring Service (CMEMS) catalogue, should allow users to access proven representations of the coastal environment at a new level of understanding (e.g. wave diffraction at coastal "obstacles"), coupling (e.g. incorporating the land discharge into the coastal sea) and reliability for applications (e.g. hazards for coastal navigation). By adding periodic bathymetric up-dating and incorporating new assimilation routines it will be possible to achieve a new level of analysis for coastal seas. In the paper we shall present the CEASELESS project that addresses the multiple scales coexisting in littoral areas by developing new shallow water parameterizations, introducing them into coupled model suites (wind-wave-surge-current-land discharge) and producing new standards for coastal simulations and analyses. This will demonstrate the technical feasibility of an operational coastal service. The set of derived products will be ingested into the users' work routines, proving the economic feasibility of such a coastal extension. The level of conflicts in squeezed coastal zones, expected to grow in the face of climate change, will, thus, benefit directly from CEASELESS, establishing tangible contributions for a wide range of economic sectors. The mutual validation of satellite data, numerical results and in-situ observations will generate

Surface roughness and morphology of dental nanocomposites polished by four different procedures evaluated by a multifractal approach

Energy Technology Data Exchange (ETDEWEB)

Ţălu, Ştefan, E-mail: stefan_ta@yahoo.com [Technical University of Cluj-Napoca, Faculty of Mechanical Engineering, Department of AET, Discipline of Descriptive Geometry and Engineering Graphics, 103-105 B-dul Muncii St., Cluj-Napoca 400641, Cluj (Romania); Stach, Sebastian, E-mail: sebastian.stach@us.edu.pl [University of Silesia, Faculty of Computer Science and Materials Science, Institute of Informatics, Department of Biomedical Computer Systems, Będzińska 39, 41-205 Sosnowiec (Poland); Lainović, Tijana, E-mail: tijana.lainovic@gmail.com [University of Novi Sad, Faculty of Medicine, School of Dentistry, Hajduk Veljkova 3, 21000 Novi Sad (Serbia); Vilotić, Marko, E-mail: markovil@uns.ac.rs [University of Novi Sad, Faculty of Technical Sciences, Department for Production Engineering, Trg Dositeja Obradovića 6, 21000 Novi Sad (Serbia); Blažić, Larisa, E-mail: larisa.blazic@gmail.com [University of Novi Sad, Faculty of Medicine, School of Dentistry, Clinic of Dentistry of Vojvodina, Department of Restorative Dentistry and Endodontics, Hajduk Veljkova 3, 21000 Novi Sad (Serbia); Alb, Sandu Florin, E-mail: albflorin@yahoo.com [“Iuliu Haţieganu” University of Medicine and Pharmacy, Faculty of Dentistry, Department of Periodontology, 8 Victor Babeş St., 400012 Cluj-Napoca (Romania); Kakaš, Damir, E-mail: kakasdam@uns.ac.rs [University of Novi Sad, Faculty of Technical Sciences, Department for Production Engineering, Trg Dositeja Obradovića 6, 21000 Novi Sad (Serbia)

2015-03-01

Graphical abstract: - Highlights: • Multifractals are good indicators of polished dental composites 3-D surface structure. • The nanofilled composite had superior 3-D surface properties than the nanohybrid one. • Composite polishing with diamond paste created improved 3-D multifractal structure. • Recommendation: polish the composite with diamond paste if using the one-step tool. • Multifractal analysis could become essential in designing new dental surfaces. - Abstract: The objective of this study was to determine the effect of different dental polishing methods on surface texture parameters of dental nanocomposites. The 3-D surface morphology was investigated by atomic force microscopy (AFM) and multifractal analysis. Two representative dental resin-based nanocomposites were investigated: a nanofilled and a nanohybrid composite. The samples were polished by two dental polishing protocols using multi-step and one-step system. Both protocols were then followed by diamond paste polishing. The 3-D surface roughness of samples was studied by AFM on square areas of topography on the 80 × 80 μm{sup 2} scanning area. The multifractal spectrum theory based on computational algorithms was applied for AFM data and multifractal spectra were calculated. The generalized dimension D{sub q} and the singularity spectrum f(α) provided quantitative values that characterize the local scale properties of dental nanocomposites polished by four different dental polishing protocols at nanometer scale. The results showed that the larger the spectrum width Δα (Δα = α{sub max} − α{sub min}) of the multifractal spectra f(α), the more non-uniform was the surface morphology. Also, the 3-D surface topography was described by statistical parameters, according to ISO 25178-2:2012. The 3-D surface of samples had a multifractal nature. Nanofilled composite had lower values of height parameters than nanohybrid composites, due to its composition. Multi-step polishing protocol

Surface roughness and morphology of dental nanocomposites polished by four different procedures evaluated by a multifractal approach

International Nuclear Information System (INIS)

Ţălu, Ştefan; Stach, Sebastian; Lainović, Tijana; Vilotić, Marko; Blažić, Larisa; Alb, Sandu Florin; Kakaš, Damir

2015-01-01

Graphical abstract: - Highlights: • Multifractals are good indicators of polished dental composites 3-D surface structure. • The nanofilled composite had superior 3-D surface properties than the nanohybrid one. • Composite polishing with diamond paste created improved 3-D multifractal structure. • Recommendation: polish the composite with diamond paste if using the one-step tool. • Multifractal analysis could become essential in designing new dental surfaces. - Abstract: The objective of this study was to determine the effect of different dental polishing methods on surface texture parameters of dental nanocomposites. The 3-D surface morphology was investigated by atomic force microscopy (AFM) and multifractal analysis. Two representative dental resin-based nanocomposites were investigated: a nanofilled and a nanohybrid composite. The samples were polished by two dental polishing protocols using multi-step and one-step system. Both protocols were then followed by diamond paste polishing. The 3-D surface roughness of samples was studied by AFM on square areas of topography on the 80 × 80 μm 2 scanning area. The multifractal spectrum theory based on computational algorithms was applied for AFM data and multifractal spectra were calculated. The generalized dimension D q and the singularity spectrum f(α) provided quantitative values that characterize the local scale properties of dental nanocomposites polished by four different dental polishing protocols at nanometer scale. The results showed that the larger the spectrum width Δα (Δα = α max − α min ) of the multifractal spectra f(α), the more non-uniform was the surface morphology. Also, the 3-D surface topography was described by statistical parameters, according to ISO 25178-2:2012. The 3-D surface of samples had a multifractal nature. Nanofilled composite had lower values of height parameters than nanohybrid composites, due to its composition. Multi-step polishing protocol created a better

Original article Validation of the Polish version of the Collective Self-Esteem Scale

Directory of Open Access Journals (Sweden)

Róża Bazińska

2015-07-01

Full Text Available Background The aim of this article is to present research on the validity and reliability of the Collective Self-Esteem Scale (CSES for the Polish population. The CSES is a measure of individual differences in collective self-esteem, understood as the global evaluation of one’s own social (collective identity. Participants and procedure Participants from two samples (n = 466 and n = 1,009 completed a paper-pencil set of questionnaires which contained the CSES and the Rosenberg Self-Esteem Scale (RSES, and subsets of participants completed scales related to a sense of belonging, well-being and psychological distress (anxiety and depression. Results Like the original version, the Polish version of the CSES comprises 16 items which form the four dimensions of collective self-esteem: Public collective self-esteem, Private collective self-esteem, Membership esteem and Importance of Identity. The results confirm the four-factor structure of the Polish version of the CSES, support the whole Polish version of the CSES as well as its subscales, which represent satisfactory reliability and stability, and provide initial evidence of construct validity. Conclusions As the results of the study indicate, the Polish version of the CSES is a valid and reliable self-report measure for assessing the global self-esteem derived from membership of a group and has proved to be useful in the Polish context.

High Arctic Coasts At Risk - The Impact of Coastal Hazards on Scientific and Community Infrastructure in Svalbard

Science.gov (United States)

Strzelecki, M. C.; Pawlowski, L.; Jaskolski, M.; Lim, M.; Zagorski, P.; Long, A. J.; Jensen, M.

2015-12-01

The rapid climate warming being observed in the Svalbard is leading to an increase in human activities in the coastal zone, leading to an increased need for coastal hazard assessment. Present-day Svalbard coastal landscapes are modified by increased degradation of permafrost accelerated sediment supply from deglaciated catchments, and prolonged periods of open-water conditions and wave activity. Since the second half of 20thcentury there is also an observed increase in the number and intensity of storms entering the Arctic particularly in summer months when coastlines are free of protective ice cover. Despite the potential significance of these coastal hazards on the security of scientific (research bases and devices) and community (ports, airports, roads, buildings) infrastructure on Svalbard, relatively little is known on the present-day rate of Svalbard coastal zone changes and how they might impact the nearshore infrastructure in the future. Here we report the results of a project that focused on rates of coastal zone changes in Svalbard and examined the impact of extreme coastal processes on scientific and community infrastructure. The project applied combination of remote sensing and field-based mapping techniques to characterise coastal changes observed in the surroundings of main research stations in Svalbard in Hornsund (PPS), Petuniabukta (AMUPS) and Bellsund (Calypsobyen) as well as a major towns: Longyearbyen, Piramiden, Barentsburg and Svea. Our results document dramatic changes of Svalbard coastal zone under intervals characterised by a warming climate, retreating local ice masses, a shortened winter sea-ice season and melting permafrost. The study confirmed the growing importance of extreme processes in shaping coasts of Svalbard and the impact of these changes on human infrastructure. Our study proposes a risk assessment for a development and protection of infrastructure along the coasts of Svalbard under scenarios of climate change, sea level rise

Development of on the machine process monitoring and control strategy in Robot Assisted Polishing

DEFF Research Database (Denmark)

Pilny, Lukas; Bissacco, Giuliano

2015-01-01

Robot Assisted Polishing (RAP) can be used to polish rotational symmetric and free form components achieving surface roughness down to Sa 10 nm. With the aim to enable unmanned robust and cost efficient application of RAP, this paper presents the development of a monitoring and control strategy....... The multisensory approach was experimentally validated in polishing with bonded abrasives demonstrating its suitability for process control in RAP....

Complex carbon cycling processes and pathways in a tropical coastal marine environment (Saco do Mamangua, RJ - Brazil)

Science.gov (United States)

Giorgioni, M.; Jovane, L.; Millo, C.; Sawakuchi, H. O.; Bertassoli, D. J., Jr.; Gamba Romano, R.; Pellizari, V.; Castillo Franco, D.; Krusche, A. V.

2016-12-01

The Saco do Mamangua is a narrow and elongated gulf located along the southeastern coast of Brazil, in the state of Rio de Janeiro (RJ). It is surrounded by high relieves, which form a peculiar environment called riá, with little river input and limited water exchange with the Atlantic Ocean. These features make the Saco do Mamangua an ideal environment to study sedimentary carbon cycling under well-constrained boundary conditions in order to investigate if tropical coastal environments serve dominantly as potential carbon sinks or sources. In this work we integrate geochemical data from marine sediments and pore waters in the Saco do Mamangua with mapping of benthic microbial communities, in order to unravel the biogeochemical carbon cycling linked to the production of biogenic methane. Our results reveal that carbon cycling occurs in two parallel pathways. The Saco do Mamangua receives organic carbon both by surface runoff and by primary production in the water column. A large part of this organic carbon is buried within the sediment resulting in the production of biogenic methane, which gives rise to methane seepages at the sea floor. These methane seeps sustain methanotrophic microbial communities in the sediment pore water, but also escapes into the atmosphere by ebullition. Consequently, the sediments of Saco do Mamangua acts simultaneously as carbon sink and carbon source. Future work will allow us to accurately quantify the actual carbon fluxes and calculate the net carbon balance in the local environment.

The prevalence of burnout syndrome in Polish anaesthesiologists.

Science.gov (United States)

Misiołek, Aleksandra; Gorczyca, Piotr; Misiołek, Hanna; Gierlotka, Zbigniew

2014-01-01

Burnout syndrome is a psychological response to chronic work-related stress characterized by low enthusiasm towards the job, high psychological exhaustion, indolence and guilt. Being a medical doctor, both in Poland and in other countries, is one of the most stressful occupations and anaesthesiology is considered one of the most stressful specializations, which justify carrying out of the study on Polish anaesthesiologists. The aim of the study was to determine the prevalence of burnout syndrome in Polish anaesthesiologists Non-randomized cross-sectional study was carried out and data were gathered through a self-administrated questionnaire. The sample consisted of 373 Polish anaesthesiologists, 57.6% were women and 42.4% were men. A 66% response rate was achieved. The Burnout Syndrome was measured by the Spanish Burnout Inventory. The prevalence burnout risk was almost 70%. The percentage of participants who indicated very high levels of burnout was 18%; 5.9% of whom fell into profile 2 considered to be clinical. The instrument applied was reliable with Cronbach's alphas exceeding 0.70. The sample is characterized by high burnout risk with 5.9% of clinical cases. Participation in prevention programs is recommended.

Modeling sediment transport in Qatar: Application for coastal development planning.

Science.gov (United States)

Yousif, Ruqaiya; Warren, Christopher; Ben-Hamadou, Radhouan; Husrevoglu, Sinan

2018-03-01

Hydrodynamics and sediment transport are key physical processes contributing to habitat structure within the marine environment. Coastal development that results in the alteration of these processes (e.g., changing water flushing and/or sedimentation rates) can have detrimental impacts on sensitive systems. This is a current, relevant issue in Qatar as its coastal regions continue to be developed, not only around the capital of Doha, but in many areas around this Arabian Gulf peninsula. The northeastern Qatari coast is comprised of diverse and sensitive flora and fauna such as seagrass and macroalgae meadows, coral reefs and patches, turtles, and dugongs that tolerate harsh environmental conditions. In the near future, this area may see a rise in anthropogenic activity in the form of coastal development projects. These projects will add to existing natural stresses, such as high temperature, high salinity, and low rates of precipitation. Consequently, there is a need to characterize this area and assess the potential impacts that these anthropogenic activities may have on the region. In the present study, a novel sediment transport model is described and used to demonstrate the potential impact of altering hydrodynamics and subsequent sediment transport along the northeastern Qatar nearshore marine environment. The developed models will be tested using potential scenarios of future anthropogenic activities forecasted to take place in the area. The results will show the effects on water and sediment behavior and provide a scientific approach for key stakeholders to make decisions with respect to the management of the considered coastal zone. Furthermore, it provides a tool and framework that can be utilized in environmental impact assessment and associated hydrodynamic studies along other areas of the Qatari coastal zone. Integr Environ Assess Manag 2018;14:240-251. © 2017 SETAC. © 2017 SETAC.

Study of Pneumatic Servo Loading System in Double-Sided Polishing

International Nuclear Information System (INIS)

Qian, N; Ruan, J; Li, W

2006-01-01

The precise double-sided polishing process is one of the main methods to get the ultra-smooth surface of workpiece. In double-sided polishing machine, a loading system is required to be able to precisely control the load superimposed on the workpiece, while the polishing is being carried out. A pneumatic servo loading system is proposed for this purpose. In the pneumatic servo system, the servo valve, which acts both the electrical to mechanical converter and the power amplifier, has a substantial influence on the performance of the loading system. Therefore a specially designed pneumatic digital servo valve is applied in the control system. In this paper, the construction of the pneumatic servo loading system in double-sided polishing machine and control strategy associated with the digital servo valve are first addressed. The mathematical model of the system established and the hardware of the pneumatic servo system is designed. Finally, the experiments are carried out by measuring the practical load on the workpiece and the quality of the surface finish. It is demonstrated that the error rate of load is less than 5% and a super-smooth surface of silicon wafer with roughness Ra 0.401 nm can be obtained

Tribochemical interaction between nanoparticles and surfaces of selective layer during chemical mechanical polishing

International Nuclear Information System (INIS)

Ilie, Filip

2013-01-01

Nanoparticles have been widely used in polish slurries such as those in the chemical mechanical polishing (CMP) process. For understanding the mechanisms of CMP, an atomic force microscope (AFM) is used to characterize polished surfaces of selective layers, after a set of polishing experiments. To optimize the CMP polishing process, one needs to get information on the interaction between the nano-abrasive slurry nanoparticles and the surface of selective layer being polished. The slurry used in CMP process of the solid surfaces is slurry with large nanoparticle size colloidal silica sol nano-abrasives. Silica sol nano-abrasives with large nanoparticle are prepared and characterized by transmission electron microscopy, particles colloidal size, and Zeta potential in this paper. The movement of nanoparticles in liquid and the interaction between nanoparticles and solid surfaces coating with selective layer are very important to obtain an atomic alloy smooth surface in the CMP process. We investigate the nanoparticle adhesion and removal processes during CMP and post-CMP cleaning. The mechanical interaction between nanoparticles and the wafer surface was studied using a microcontact wear model. This model considers the nanoparticle effects between the polishing interfaces during load balancing. Experimental results on polishing and cleaning are compared with numerical analysis. This paper suggests that during post-CMP cleaning, a combined effort in chemical and mechanical interaction (tribochemical interactions) would be effective in removal of small nanoparticles during cleaning. For large nanoparticles, more mechanical forces would be more effective. CMP results show that the removal rate has been improved to 367 nm/min and root mean square (RMS) of roughness has been reduced from 4.4 to 0.80 nm. Also, the results show that the silica sol nano-abrasives about 100 nm are of higher stability (Zeta potential is −65 mV) and narrow distribution of nanoparticle

Barriers and Limitations of Mentoring in Polish Organizations

Directory of Open Access Journals (Sweden)

Joanna Mesjasz

2013-09-01

Full Text Available In Polish organizations one can recognize a lot of barriers in the mentoring implementation. According to the author, at the root of these barriers are hierarchies of values: social, national, organizational, and hierarchies of values represented by individual employees. The purpose of this article is to trace the sources of constraints in the mentoring implementation process. The analysis is carried out on several levels: from the broadest social perspective, through the national to the perspective of the organization. In the article, there are also presented actions that should be taken by Polish organizations to overcome barriers and constraints in the mentoring implementation process.

Process optimization for ultrasonic vibration assisted polishing of micro-structured surfaces on super hard material

Science.gov (United States)

Sun, Zhiyuan; Guo, Bing; Rao, Zhimin; Zhao, Qingliang

2014-08-01

In consideration of the excellent property of SiC, the ground micro-structured surface quality is hard to meet the requirement - consequently the ultrasonic vibration assisted polishing (UVAP) of micro-structures of molds is proposed in this paper. Through the orthogonal experiment, the parameters of UVAP of micro-structures were optimized. The experimental results show that, abrasive polishing process, the effect of the workpiece feed rate on the surface roughness (Ra), groove tip radius (R) and material removal rate (MRR) of micro-structures is significant. While, the UVAP, the most significant effect factor for Ra, R and MRR is the ultrasonic amplitude of the ultrasonic vibration. In addition, within the scope of the polishing process parameters selected by preliminary experiments, ultrasonic amplitude of 2.5μm, polishing force of 0.5N, workpiece feed rate of 5 mm·min-1, polishing wheel rotational speed of 50rpm, polishing time of 35min, abrasive size of 100nm and the polishing liquid concentration of 15% is the best technology of UVAP of micro-structures. Under the optimal parameters, the ground traces on the micro-structured surface were removed efficiently and the integrity of the edges of the micro-structure after grinding was maintained efficiently.

The effect of different polishing systems on surface roughness and gloss of various resin composites.

Science.gov (United States)

Da Costa, Juliana; Ferracane, Jack; Paravina, Rade D; Mazur, Rui Fernando; Roeder, Leslie

2007-01-01

The purpose of this in vitro study was to evaluate the surface finish and gloss of five direct resin composites polished with six polishing systems. One hundred and fifty disk-shaped composite specimens (D=10.0 mm, 2-mm-thick, N=30 per material) were made. One side of each specimen was finished with a 16-fluted carbide finishing bur and then polished. Five specimens of each resin composite were randomly assigned to one of the six polishing systems. The surface roughness and gloss were measured with a surface profilometer and a glossmeter. The results were analyzed by two-way analysis of variance and Tukey's t-test (pgloss values between the composites and the polishing systems (p gloss value was recorded for Supreme + Pogo; the lowest was recorded for Z100 + Jiffy. Pogo showed the highest gloss values for all composites. The nanofill (Supreme) and minifill (Esthet-X) composites presented a surface roughness comparable to a microfill (Durafill), independent of the polishing system used, and a gloss comparable to a microfill, when polished with a one-step system (Pogo). As compared with the multiple-step systems, the smoothest surfaces and the highest gloss values were achieved using the one-step system (Pogo) for all the evaluated composites.

Surface roughness of novel resin composites polished with one-step systems.

Science.gov (United States)

Ergücü, Z; Türkün, L S

2007-01-01

This study: 1) analyzed the surface roughness of five novel resin composites that contain nanoparticles after polishing with three different one-step systems and 2) evaluated the effectiveness of these polishers and their possible surface damage using scanning electron microscope (SEM) analysis. The resin composites evaluated in this study include CeramX, Filtek Supreme XT, Grandio, Premise and Tetric EvoCeram. A total of 100 discs (20/resin composites, 10 x 2 mm) were fabricated. Five specimens/resin composites cured under Mylar strips served as the control. The samples were polished for 30 seconds with PoGo, OptraPol and One Gloss discs at 15,000 rpm using a slow speed handpiece. The surfaces were tested for roughness (Ra) with a surface roughness tester and examined with SEM. One-way ANOVA was used for statistical analysis (p = 0.05). For all the composites tested, differences between the polishing systems were found to be significant (p One Gloss applications. For Grandio, Mylar and PoGo created equally smooth surfaces, while OptraPol and One Gloss produced equally rougher surfaces. Tetric EvoCeram exhibited the roughest surface with OptraPol, while no significant differences were found between Premise and CeramX. According to SEM images, OptraPol and One Gloss scratched and plucked the particles away from the surface, while PoGo created a uniform finish, although the roughness values were not the same for each composite. Effectiveness of the polishers seems to be material dependent.

Nitrite-induced enhancement of toxicity of phenanthrene in fish and its implications for coastal waters

Digital Repository Service at National Institute of Oceanography (India)

Shailaja, M.S.; Rodrigues, A

Coastal areas are prone to varying degrees of anthropogenic chemical contamination. In many coastal environments experiencing reducing conditions in the water column, nitrite is produced as a result of denitrification. With a view to determining...

Numerical Simulation Analysis of Five-Step Variable-Diameter Pipe with Solid-Liquid Two-Phase Abrasive Flow Polishing

Science.gov (United States)

Li, Junye; Zhang, Hengfu; Wu, Guiling; Hu, Jinglei; Liu, Yang; Sun, Zhihui

2018-01-01

In many areas of precision machining abrasive flow polishing technology has an important role. In order to study the influence of abrasive flow on the polishing effect of variable diameter parts, the fifth step variable diameter tube was taken as the research object to analyze the dynamic pressure and turbulent kinetic energy distribution of inlet velocity on the fifth-order variable diameter tube influences. Through comparative analysis, the abrasive flow polished variable diameter pipe parts have very effective and significant polishing effect and the higher the inlet speed, the more significant the polishing effect.

Study on water quality around mangrove ecosystem for coastal rehabilitation

Science.gov (United States)

Guntur, G.; Sambah, A. B.; Arisandi, D. M.; Jauhari, A.; Jaziri, A. A.

2018-01-01

Coastal ecosystems are vulnerable to environmental degradation including the declining water quality in the coastal environment due to the influence of human activities where the river becomes one of the input channels. Some areas in the coastal regions of East Java directly facing the Madura Strait indicate having experienced the environmental degradation, especially regarding the water quality. This research was conducted in the coastal area of Probolinggo Regency, East Java, aiming to analyze the water quality as the basis for coastal rehabilitation planning. This study was carried out using survey and observation methods. Water quality measurement results were analyzed conforming to predetermined quality standards. The coastal area rehabilitation planning as a means to restore the degraded water quality parameters is presumably implemented through mangrove planting. Thus, the mangrove mapping was also devised in this research. Based on 40 sampling points, the results illustrate that according to the quality standard, the water quality in the study area is likely to be deteriorated. On account of the mapping analysis of mangrove distribution in the study area, the rehabilitation of the coastal zone can be done through planning the mangrove forest plantation. The recommended coastal area maintenance is a periodic water quality observation planning in the river region which is divided into three zones to monitor the impact of fluctuating changes in land use or human activities on the coastal water quality.

Spring molybdenum enrichment in scallop shells: a potential tracer of diatom productivity in coastal temperate environments (Brittany, NW France)?

Science.gov (United States)

Barats, A.; Amouroux, D.; Pécheyran, C.; Chauvaud, L.; Thébault, J.; Donard, O. F. X.

2009-08-01

Skeletal molybdenum/calcium ([Mo]/[Ca])shell ratios were recently examined in bivalves. These ratios were determined by quantitative LA-ICP-MS analyses every third daily striae (i.e. a temporal resolution of 3 days) in 36 flat valves of the Great Scallop shells Pecten maximus (2-year old; 3 shells/year) collected in temperate coastal environments of Western Europe (42 to 49° N). Variations of ([Mo]/[Ca])shell ratio were significant and reproducible for scallops from a same population, from different years (1998-2004) and from different coastal temperate locations. ([Mo]/[Ca])shell exhibits typical profiles characterized by a background content, below the method detection limit (<0.003 μmol/mol) for most of the shell growth period, which is punctuated by a significant transient enrichment (0.031-2.1 μmol/mol) mainly occurring from May to June. The Bay of Brest (France) was especially investigated because of long term observations on scallop communities, environmental variables, and high resolution analyses of dissolved Mo in bottom seawater in 2000. In 2000, dissolved Mo exhibited significant increasing concentration just preceding a maximum of ([Mo]/[Ca])shell ratio. The environmental conditions preceding ([Mo]/[Ca])shell maximum events, both in 2000 and over the 7-year survey indicates a direct influence of the scallop environmental conditions at the sediment water interface subsequent to the intense and periodic spring bloom event. Spring maxima of ([Mo]/[Ca])shell ratio were found to be specifically related to the dynamic of spring diatom blooms and to the extent of the subsequent silicate depletion. ([Mo]/[Ca])shell records reveal thus unexpected biogeochemical routes of Mo, potentially related to coastal spring productivity.

Microstructure of pulsed-laser deposited PZT on polished and annealed MGO substrates

NARCIS (Netherlands)

King, S.L.; Coccia, L.G.; Gardeniers, Johannes G.E.; Boyd, I.W.

1996-01-01

Thin films of Lead-Zirconate-Titanate (PZT) have been grown by pulsed-laser-deposition (PLD) onto polished MgO substrates both with and without pre-annealing. The surface morphology of polished MgO substrates, which are widely used for deposition, is examined by AFM. Commercially available,

Development of a multisensory arm for process monitoring in Robot Assisted Polishing

DEFF Research Database (Denmark)

Pilny, Lukas; Dalla Costa, Giuseppe; Bissacco, Giuliano

2015-01-01

A multisensory polishing arm with integrated three component force sensor, a miniature acoustic emission (AE) sensor and an accelerometer was developed for process monitoring in Robot Assisted Polishing (RAP) process. The arm design was optimized for integration of a force and an AE sensor. The f...

Polish normalization of the Body Esteem Scale

Directory of Open Access Journals (Sweden)

Małgorzata Lipowska

2014-02-01

Full Text Available Background Physical attractiveness plays an important part in one’s social functioning. The interest in one’s own appearance have been documented as widespread among the female population, but over the recent years it is more and more often emphasized that concentrating on body appearance concerns men as well. Franzoi and Shields (1984 created the Body Esteem Scale which allows to qualify the subject’s attitude towards his or her own body. The aim of the study was to create a Polish version of the Body Esteem Scale along with the norms for age and sex clusters. Participants and procedure The normalization sample consisted of 4298 participants: 1865 women aged 16 to 80 (M = 29.92; SD = 12.85 and 2433 men aged 16 to 78 (M = 28.74; SD = 11.50. Education levels among the participants were also controlled for. In order to create a Polish version of the Body Esteem Scale, translation was adopted as the adaptation strategy. Like the original one, the Polish scale comprises 35 items grouped into three gender specific subscales. The subscales for women include Sexual Attractiveness, Weight Concern, and Physical Condition, whereas the body esteem of is examined with regards to Physical Attractiveness, Upper Body Strength, and Physical Condition. Results Reliability of subscales was high both for females (Cronbach’s alpha from 0.80 to 0.89 and males (Cronbach’s alpha from 0.85 to 0.88. The given coefficients of reliability cover the original division into subscales adopted by the authors of BES. Conclusions We confirmed high reliability of the Polish version of the Body Esteem Scale, thus we recommend it as a diagnostic tool. Created norms allowed to refer results obtained in the course of research carried out on people with various disorders (e.g. eating disorders or body dysmorphic disorder with population data for corresponding age brackets.

[Józef Heller-one of organizers of Polish biochemistry in 1942-1973].

Science.gov (United States)

Zarebska, Zofia

2011-01-01

The article commemorates the activity of Józef Heller starting in 1921 with Jakub Parnas's group in Lvov which investigated the phosphorolysis of glycogen. The unknown events of His biography were disclosed, like military service in the Piłsudski's Legions at the rebirth of the Polish State and, subsequently, during the Nazi occupation of Poland--participation in the clandestine teaching of medical students. In the post-war times Józef Heller undertook teaching of medical students in Wrocław and next in Warsaw. In 1954 He begun to organize the Institute of Biochemistry and Biophysics of the Polish Academy of Sciences--it now continues its activity. Professor Heller initiated the publication in Poland of three major biochemical journals, including Postepy Biochemii (1954). Thanks to His leadership the first Polish Medical Dictionary was published (1981). The article summarizes the pursuit of Józef Heller in various branches of academic life, which were and still are appreciated by subsequent generations of Polish biochemists.

Surface roughness of zirconia for full-contour crowns after clinically simulated grinding and polishing.

Science.gov (United States)

Hmaidouch, Rim; Müller, Wolf-Dieter; Lauer, Hans-Christoph; Weigl, Paul

2014-12-01

The aim of this study was to evaluate the effect of controlled intraoral grinding and polishing on the roughness of full-contour zirconia compared to classical veneered zirconia. Thirty bar-shaped zirconia specimens were fabricated and divided into two groups (n=15). Fifteen specimens (group 1) were glazed and 15 specimens (group 2) were veneered with feldspathic ceramic and then glazed. Prior to grinding, maximum roughness depth (Rmax) values were measured using a profilometer, 5 times per specimen. Simulated clinical grinding and polishing were performed on the specimens under water coolant for 15 s and 2 N pressure. For grinding, NTI diamonds burs with grain sizes of 20 µm, 10 µm, and 7.5 µm were used sequentially. The ground surfaces were polished using NTI kits with coarse, medium and fine polishers. After each step, Rmax values were determined. Differences between groups were examined using one-way analysis of variance (ANOVA). The roughness of group 1 was significantly lower than that of group 2. The roughness increased significantly after coarse grinding in both groups. The results after glazing were similar to those obtained after fine grinding for non-veneered zirconia. However, fine-ground veneered zirconia had significantly higher roughness than venerred, glazed zirconia. No significant difference was found between fine-polished and glazed zirconia, but after the fine polishing of veneered zirconia, the roughness was significantly higher than after glazing. It can be concluded that for full-contour zirconia, fewer defects and lower roughness values resulted after grinding and polishing compared to veneered zirconia. After polishing zirconia, lower roughness values were achieved compared to glazing; more interesting was that the grinding of glazed zirconia using the NTI three-step system could deliver smooth surfaces comparable to untreated glazed zirconia surfaces.

Effects of finishing/polishing techniques on microleakage of resin-modified glass ilonomer cement restorations.

Science.gov (United States)

Yap, Adrian U J; Yap, W Y; Yeo, Egwin J C; Tan, Jane W S; Ong, Debbie S B

2003-01-01

This study investigated the effect of finishing/polishing techniques on the microleakage of resin-modified glass ionomer restorations. Class V preparations were made on the buccal and lingual/palatal surfaces of freshly extracted teeth. The cavities on each tooth were restored with Fuji II LC (FT [GC]) and Photac-Fil Quick (PF [3M-ESPE]) according to manufacturers' instructions. Immediately after light-polymerization, gross finishing was done with eight-fluted tungsten carbide burs. The teeth were then randomly divided into four groups and finishing/polishing was done with one of the following systems: (a) Robot Carbides (RC); (b) Super-Snap system (SS); (c) OneGloss (OG) and (d) CompoSite Polishers (CS). The sample size for each material-finishing/polishing system combination was eight. After finishing/polishing, the teeth were stored in distilled water at 37 degrees C for one week. The root apices were then sealed with acrylic and two coats of varnish was applied 1 mm beyond the restoration margins. The teeth were subsequently subjected to dye penetration testing (0.5% basic fuchsin), sectioned and scored. Data was analyzed using Kruskal-Wallis and Mann-Whitney U tests at a significance level of 0.05. Results of statistical analysis were as follows: Enamel margins: PF-OGpolishing technique, leakage at dentin margins was significantly greater than at enamel margins for FT. For PF, no significant difference in leakage scores was observed between dentin and enamel with the exception of finishing/polishing with OG. FT restorations had significantly less enamel and dentin leakage than PF restorations when treated with OG. The effect of finishing/polishing techniques on microleakage was both tissue and material dependent.

A new view on dam lines in Polish Arabian horses based on mtDNA analysis

Directory of Open Access Journals (Sweden)

Sell Jerzy

2007-09-01

Full Text Available Abstract Polish Arabian horses are one of the oldest and the most important Arab populations in the world. The Polish Arabian Stud Book and the Genealogical Charts by Skorkowski are the main sources of information on the ancestors of Polish Arabs. Both publications were viewed as credible sources of information until the 1990s when the data regarding one of the dam lines was questioned. The aim of the current study was to check the accuracy of the pedigree data of Polish dam lines using mtDNA analysis. The analyses of a 458 bp mtDNA D-loop fragment from representatives of 15 Polish Arabian dam lines revealed 14 distinct haplotypes. The results were inconsistent with pedigree data in the case of two lines. A detailed analysis of the historical sources was performed to explain these discrepancies. Our study revealed that representatives of different lines shared the same haplotypes. We also noted a genetic identity between some lines founded by Polish mares of unknown origin and lines established by desert-bred mares.

Biomarkers of physiological responses of Octopus vulgaris to different coastal environments in the western Mediterranean Sea.

Science.gov (United States)

Sillero-Ríos, J; Sureda, A; Capó, X; Oliver-Codorniú, M; Arechavala-Lopez, P

2018-03-01

The increase of pollutants in coastal seawater could produce several harmful biological effects on marine organisms related to the production of reactive oxygen species (ROS) causing cellular and tissue damages through oxidative stress mechanisms. Common octopuses (Octopus vulgaris) inhabiting coastal areas under high anthropogenic activity of Mallorca (W-Mediterranean Sea) have the ability to control oxidative damage by triggering antioxidant enzyme responses. Analyzing the digestive glands, octopuses from human-altered coastal areas showed higher activity of superoxide dismutase (SOD), catalase (CAT) and glutathione S-transferase (GST) compared to octopuses from non-influenced coastal waters (i.e. marine reserve area). Higher metallothionein (MT) concentrations and lack of malondialdehyde (MDA) variations also reflect adaptations of O. vulgaris to polluted areas. This is the first study assessing the levels of the oxidative stress biomarkers on O. vulgaris in the Mediterranean Sea, revealing their usefulness to assess diverse environmental pollution effects on this relevant ecological and commercial species.

Great Britain and German-Polish Relations, 1929–1931

Directory of Open Access Journals (Sweden)

Zotova Ekaterina

2014-12-01

Full Text Available The article deals with the study of British-German relations during the period of exacerbation of territorial disputes between Germany and Poland in 1929-1931. Germany was making plans for revising the eastern borders. It sought to enlist the support of the new Labour government. Britain didn’t only approve of Germany's intention to carry out revision of the Treaty of Versailles (reparation issue, the evacuation of the Rhineland and the change in the German-Polish border, but also supported the strengthening of the political and economic situation in Germany as a whole. Assistance to Germany was advantageous for Britain. Firstly, the British support helped to improve the capacity of the purchasing power of the German market as one of the traditional markets of the English sale. Secondly, the strengthening of the position of the German cabinet meant failure of the French policy in Europe at this stage. The defeat of France in a dispute on the issue of early evacuation of the Rhineland would seriously devalue the foreign policy initiatives of Paris. Thirdly, the British government hoped that Germany will go into orbit of British political influence. The identity of the positions of the German and the British cabinets were considered as the components of British policy success not only in relations with France and Italy, but also with Czechoslovakia and Poland. Since the formation of the MacDonald’s cabinet, anti-Polish moods increased in the British course for the settlement of German-Polish relations. However, the threat of an attack on Poland by Germany was regarded by the government of Britain as unacceptable way of resolving the German-Polish conflict. Britain tried to follow the traditional foreign policy concept of “balance of power”, but the inefficiency of British policy “mediation” in European affairs was clearly shown in times of growing financial and economic crisis. The issue of the German-Polish border remained unsolved.

E-TOURISM SERVICES IN POLISH TOURISTS' OPINIONS

Directory of Open Access Journals (Sweden)

Joanna Papińska-Kacperek

2013-07-01

Full Text Available E-tourism is most often related only with web pages of travel agencies or aggregators offering many services, where it is possible to make transactions electronically. Whereas many applications and devices are applied in tourism, like the audio guides and mobile guides (sometimes with augmented reality functions, electronic cards in museums, 2D codes systems, web pages for individual tourists, geographic information systems (e.g. Google Street View, social network sites recommendation, and profiles of cities on social networks sites like Facebook. Polish tourists' opinions about mentioned innovative tools will be presented as the report from the survey conducted among students and graduates from three Polish universities. The objectives of the study are: investigating the popularity of e-tourist services in Poland and verifying whether municipal authorities promote e-tourism initiatives.

Chemical polishing of epitoxial silicon wafer

International Nuclear Information System (INIS)

Osada, Shohei

1978-01-01

SSD telescopes are used for the determination of the kind and energy of charged particles produced by nuclear reactions, and are the equipments combining ΔE counters and E counters. The ΔE counter is a thin SSD which is required to be thin and homogeneous enough to get the high resolution of measurement. The SSDs for ΔE counters have so far been obtained by polishing silicon plates mechanically and chemically or by applying electrolytic polishing method on epitaxial silicon wafers, but it was very hard to obtain them. The creative etching equipment and technique developed this time make it possible to obtain thin SSDs for ΔE counters. The outline of the etching equipment and its technique are described in the report. The etching technique applied for the silicon films for ΔE counters with thickness of about 10 μm was able to be experimentally established in this study. (Kobatake, H.)

The potential accumulation of polycyclic aromatic hydrocarbons in phytoplankton and bivalves in Can Gio coastal wetland, Vietnam.

Science.gov (United States)

Thuy, Hoang Thi Thanh; Loan, Tu Thi Cam; Phuong, Trinh Hong

2018-05-12

Polycyclic aromatic hydrocarbons (PAHs) are one of the most important classes of anthropogenic persistent organic contaminants in the marine environment. This review discusses a whole range of findings that address various aspects of the bioaccumulation of PAHs in two common marine biota (phytoplankton and bivalves) globally and especially for Can Gio coastal wetland, Vietnam. The published information and collected data on the bioconcentration and accumulation mechanisms of PAHs as well as implications for Can Gio coastal wetland are compiled for phytoplankton and bivalves. PAHs are still released to Can Gio coastal environments from various sources and then transported to coastal environments through various physical processes; they may enter marine food chains and be highly accumulated in phytoplankton and bivalves. Thus, PAHs' bioaccumulation should be considered as one important criterion to assess the water's quality, directly linked to human health due to seafood consumption. Ecologically, Can Gio coastal wetland plays an important role to the South Vietnam key economic zone. However, it is also an area of potential PAHs inputs. With the abundant phytoplankton and bivalves in Can Gio coastal wetland, the PAHs bioaccumulation in these biota is inevitably detected. Thus, further study on the bioavailability of these contaminants is urgently needed in order to mitigate their negative effects and protect the ecosystems.

A spatial pattern analysis of the halophytic species distribution in an arid coastal environment.

Science.gov (United States)

Badreldin, Nasem; Uria-Diez, J; Mateu, J; Youssef, Ali; Stal, Cornelis; El-Bana, Magdy; Magdy, Ahmed; Goossens, Rudi

2015-05-01

Obtaining information about the spatial distribution of desert plants is considered as a serious challenge for ecologists and environmental modeling due to the required intensive field work and infrastructures in harsh and remote arid environments. A new method was applied for assessing the spatial distribution of the halophytic species (HS) in an arid coastal environment. This method was based on the object-based image analysis for a high-resolution Google Earth satellite image. The integration of the image processing techniques and field work provided accurate information about the spatial distribution of HS. The extracted objects were based on assumptions that explained the plant-pixel relationship. Three different types of digital image processing techniques were implemented and validated to obtain an accurate HS spatial distribution. A total of 2703 individuals of the HS community were found in the case study, and approximately 82% were located above an elevation of 2 m. The micro-topography exhibited a significant negative relationship with pH and EC (r = -0.79 and -0.81, respectively, p < 0.001). The spatial structure was modeled using stochastic point processes, in particular a hybrid family of Gibbs processes. A new model is proposed that uses a hard-core structure at very short distances, together with a cluster structure in short-to-medium distances and a Poisson structure for larger distances. This model was found to fit the data perfectly well.

Coastal estuaries and lagoons: The delicate balance at the edge of the sea

Science.gov (United States)

Conrads, Paul A.; Rodgers, Kirk D.; Passeri, Davina L.; Prinos, Scott T.; Smith, Christopher; Swarzenski, Christopher M.; Middleton, Beth A.

2018-04-19

Coastal communities are increasingly concerned about the dynamic balance between freshwater and saltwater because of its implications for societal, economic, and ecological resources. While the mixing of freshwater and saltwater sources defines coastal estuaries and lagoons, sudden changes in this balance can have a large effect on critical ecosystems and infrastructure. Any change to the delivery of water from either source has the potential to affect the health of both humans and natural biota and also to damage coastal infrastructure. This fact sheet discusses the potential of major shifts in the dynamic freshwater-saltwater balance to alter the environment and coastal stability.

Combining L- and X-Band SAR Interferometry to Assess Ground Displacements in Heterogeneous Coastal Environments: The Po River Delta and Venice Lagoon, Italy

Directory of Open Access Journals (Sweden)

Luigi Tosi

2016-04-01

Full Text Available From leveling to SAR-based interferometry, the monitoring of land subsidence in coastal transitional environments significantly improved. However, the simultaneous assessment of the ground movements in these peculiar environments is still challenging. This is due to the presence of relatively small built-up zones and infrastructures, e.g., coastal infrastructures, bridges, and river embankments, within large natural or rural lands, e.g., river deltas, lagoons, and farmland. In this paper we present a multi-band SAR methodology to integrate COSMO-SkyMed and ALOS-PALSAR images. The method consists of a proper combination of the very high-resolution X-band Persistent Scatterer Interferometry (PSI, which achieves high-density and precise measurements on single structures and constructed areas, with L-band Short-Baseline SAR Interferometry (SBAS, properly implemented to raise its effectiveness in retrieving information in vegetated and wet zones. The combined methodology is applied on the Po River Delta and Venice coastland, Northern Italy, using 16 ALOS-PALSAR and 31 COSMO-SkyMed images covering the period between 2007 and 2011. After a proper calibration of the single PSI and SBAS solution using available GPS records, the datasets have been combined at both the regional and local scales. The measured displacements range from ~0 mm/yr down to −35 mm/yr. The results reveal the variable pattern of the subsidence characterizing the more natural and rural environments without losing the accuracy in quantifying the sinking of urban areas and infrastructures. Moreover, they allow improving the interpretation of the natural and anthropogenic processes responsible for the ongoing subsidence.

Strategy of the Polish policy in the final phase of the Second world war

Directory of Open Access Journals (Sweden)

L. P. Shvab

2014-09-01

Full Text Available The problems of strategy formation of the Polish government, which was in emigration, during the Second World War in the period of the eastern front approaching to the Polish borders, are found out in the article. The author confirms that the success of the Red Army made London government to rise a question about the Polish eastern border and legitimacy of London government on the liberated territories. Both questions did not have the solution in the way of traditional Polish policy. Joseph Stalin expected concession in the issue of the eastern border instead of loyalty to the London government. But Polish government did not accept accomplished facts. The ambassadors Stanislav Kot, later Tadeush Romer negotiated and insisted on returning of the western Ukrainian and Byelorussian lands. They proposed military cooperation with the Polish Home Army, which supposed to be strong enough for diversionary acts. After the battle of Stalingrad victory and that resonance, which it had made in the world, Stalin refused from such cooperation, he thought that Poland was too weak partner. Stalin continued the escalation of the relations, he consciously stopped all diplomatic relations, flatly refused to continue discussion about borders and changed the way of discussion about the legitimacy of the authentic authority in Poland.

Monitoring coastal wetlands in a highly dynamic tropical environment

International Nuclear Information System (INIS)

Saynor, M.J.; Finlayson, C.M.; Spiers, A.; Eliot, I.

2001-01-01

The Alligator Rivers Region in the wet-dry tropics of northern Australia has been selected by government and collaborating agencies as a key study area for the monitoring of natural and human-induced coastal change. The Region contains the floodplain wetlands of Kakadu National Park which have been recognised internationally for their natural and cultural heritage value. A coastal monitoring program for assessing and monitoring environmental change in the Alligator Rivers Region has been established at the Environmental Research Institute of the Supervising Scientist. This program has developed a regional capacity to measure and assess change on the wetlands, floodplains and coastline within the region. Field assessment and monitoring procedures have been developed for the program. The assessment procedures require use of georeferencing and data handling techniques to facilitate comparison and relational overlay of a wide variety of information. Monitoring includes regular survey of biophysical and cultural processes on the floodplains; such as the extension of tidal creeks and mangroves, shoreline movement, dieback in Melaleuca wetlands, and weed invasion of freshwater wetlands. A differential Global Positioning System is used to accurately georeference spatial data and a Geographic Information System is then used to store and assess information. The assessment and monitoring procedures can be applied to the wet-dry tropics in general. These studies are all particularly pertinent with the possibility of greenhouse gases causing global warming and potential sea-level rise, a major possible threat to the valued wetlands of Kakadu National Park, and across the wet-dry tropics in general

Historical bathymetry and bathymetric change in the Mississippi-Alabama coastal region, 1847-2009

Science.gov (United States)

Buster, Noreen A.; Morton, Robert A.

2011-01-01

Land loss and seafloor change around the Mississippi and Alabama (MS-AL) barrier islands are of great concern to the public and to local, state, and federal agencies. The islands provide wildlife protected areas and recreational land, and they serve as a natural first line of defense for the mainland against storm activity (index map on poster). Principal physical conditions that drive morphological seafloor and coastal change in this area include decreased sediment supply, sea-level rise, storms, and human activities (Otvos, 1970; Byrnes and others, 1991; Morton and others, 2004; Morton, 2008). Seafloor responses to the same processes can also affect the entire coastal zone. Sediment eroded from the barrier islands is entrained in the littoral system, where it is redistributed by alongshore currents. Wave and current activity is partially controlled by the profile of the seafloor, and this interdependency along with natural and anthropogenic influences has significant effects on nearshore environments. When a coastal system is altered by human activity such as dredging, as is the case of the MS-AL coastal region, the natural state and processes are altered, and alongshore sediment transport can be disrupted. As a result of deeply dredged channels, adjacent island migration is blocked, nearshore environments downdrift in the littoral system become sediment starved, and sedimentation around the channels is modified. Sediment deposition and erosion are reflected through seafloor evolution. In a rapidly changing coastal environment, understanding historically where and why changes are occurring is essential. To better assess the comprehensive dynamics of the MS-AL coastal zone, a 160-year evaluation of the bathymetry and bathymetric change of the region was conducted.

Effect of prophylactic polishing protocols on the surface roughness of esthetic restorative materials.

Science.gov (United States)

Neme, A L; Frazier, K B; Roeder, L B; Debner, T L

2002-01-01

Many polishing protocols have been evaluated in vitro for their effect on the surface roughness of restorative materials. These results have been useful in establishing protocols for in vivo application. However, limited research has focused on the subsequent care and maintenance of esthetic restorations following their placement. This investigation evaluated the effect of five polishing protocols that could be implemented at recall on the surface roughness of five direct esthetic restorative materials. Specimens (n=25) measuring 8 mm diameter x 3 mm thick were fabricated in an acrylic mold using five light-cured resin-based materials (hybrid composite, microfilled composite, packable composite, compomer and resin-modified glass ionomer). After photopolymerization, all specimens were polished with Sof-Lex Disks to produce an initial (baseline) surface finish. All specimens were then polished with one of five prophylactic protocols (Butler medium paste, Butler coarse paste, OneGloss, SuperBuff or OneGloss & SuperBuff). The average surface roughness of each treated specimen was determined from three measurements with a profilometer (Surface 1). Next, all specimens were brushed 60,000 times at 1.5 Hz using a brush-head force of 2 N on a Manly V-8 cross-brushing machine in a 50:50 (w/w) slurry of toothpaste and water. The surface roughness of each specimen was measured after brushing (Surface 2) followed by re-polishing with one of five protocols, then final surface roughness values were determined (Surface 3). The data were analyzed using repeated measures ANOVA. Significant differences (p=0.05) in surface roughness were observed among restorative materials and polishing protocols. The microfilled and hybrid resin composite yielded significantly rougher surfaces than the other three materials following tooth brushing. Prophylactic polishing protocols can be used to restore a smooth surface on resin-based esthetic restorative materials following simulated tooth

Reproductive phenology of Mauritia flexuosa L. (Arecaceae in a coastal restinga environment in northeastern Brazil

Directory of Open Access Journals (Sweden)

F. N. Mendes

Full Text Available Abstract The buriti, Mauritia flexuosa, is the most common palm in Brazil, where it has considerable ecological and economic importance. However, few data are available on the phenology of the species, mainly in coastal restinga ecosystems. The present study monitored the reproductive phenology of M. flexuosa in the restinga of Barreirinhas, in the Brazilian Northeast, and investigated the relationship between phenophases and climatic variables. The presence/absence of flowers and fruits was recorded monthly in 25 individuals of each sex between August, 2009, and October, 2012. There was no difference in the phenology of male and female specimens, with flowering and fruiting occurring exclusively in the dry season. We believe that the specific abiotic characteristics of the study environment, such as the intense sunlight and availability of water in the soil, contribute to the reproductive success of M. flexuosa in the dry season, with consequent germination and establishment of seedlings occurring during the subsequent rainy season.

Reproductive phenology of Mauritia flexuosa L. (Arecaceae) in a coastal restinga environment in northeastern Brazil.

Science.gov (United States)

Mendes, F N; Valente, R M; Rêgo, M M C; Esposito, M C

2017-03-01

The buriti, Mauritia flexuosa, is the most common palm in Brazil, where it has considerable ecological and economic importance. However, few data are available on the phenology of the species, mainly in coastal restinga ecosystems. The present study monitored the reproductive phenology of M. flexuosa in the restinga of Barreirinhas, in the Brazilian Northeast, and investigated the relationship between phenophases and climatic variables. The presence/absence of flowers and fruits was recorded monthly in 25 individuals of each sex between August, 2009, and October, 2012. There was no difference in the phenology of male and female specimens, with flowering and fruiting occurring exclusively in the dry season. We believe that the specific abiotic characteristics of the study environment, such as the intense sunlight and availability of water in the soil, contribute to the reproductive success of M. flexuosa in the dry season, with consequent germination and establishment of seedlings occurring during the subsequent rainy season.

The Behavior of Environmentally Friendly Corrosion Preventative Compounds in an Aggressive Coastal Marine Environment