WorldWideScience

Sample records for polish anatomical terminology

  1. Terminologia anatomica in the past and the future from perspective of 110th anniversary of Polish Anatomical Terminology.

    Science.gov (United States)

    Gielecki, J; Zurada, A; Osman, N

    2008-05-01

    Professional terminology is commonplace, particularly in the fields of mathematics, medicine, veterinary and natural sciences. The use of the terminology can be international, as it is with Anatomical Terminology (AT). In the early age of modern education, anatomists adopted Latin as the international language for AT. However, at the end of the 20th century, the English language became more predominant around the world. It can be said that the AT is a specific collection of scientific terms. One of the major flaws in early AT was that body structures were described by varying names, while some of the terms was irrational in nature, and confusing. At this time, different international committees were working on preparing a unified final version of the AT, which in the end consisted of 5,640 terms (4,286 originally from the Basle Nomina Anatomica, BNA). Also, each country wanted to have its own nomenclature. In order to accomplish this, each country based their nomenclature on the international AT, and then translated it into their own language. The history of the Polish Anatomical Terminology (PAT) is unique, and follows the events of history. It was first published in 1898, at a time when its neighbours partitioned the territory of Poland. During 150 years, the Polish culture and language was under the Russification and Germanization policy. It is important to note, that even with such difficult circumstances, the PAT was the first national AT in the world. The PAT was a union of the accepted first BNA in Latin and the original Polish anatomical equivalents. This union formed the basis for theoretical and clinical medicine in Poland.

  2. Anatomical terminology in Ophthalmology

    OpenAIRE

    Abib, Fernando César; Oréfice, Fernando

    2005-01-01

    O objetivo deste artigo é informar à classe oftalmológica a existência da edição em língua portuguesa da Terminologia Anatômica Internacional, editada pela Federation Committee on Anatomical Terminology (FCAT). No Brasil a Terminologia Anatômica Internacional é traduzida pela Comissão de Terminologia Anatômica (CTA) da Sociedade Brasileira de Anatomia (SBA).The purpose of this article is inform ophthalmologists of the International Anatomical Terminology in the Portuguese language edited by t...

  3. Unification of Sinonasal Anatomical Terminology

    Directory of Open Access Journals (Sweden)

    Voegels, Richard Louis

    2015-07-01

    Full Text Available The advent of endoscopy and computed tomography at the beginning of the 1980s brought to rhinology a revival of anatomy and physiology study. In 1994, the International Conference of Sinus Disease was conceived because the official “Terminologia Anatomica”[1] had little information on the detailed sinonasal anatomy. In addition, there was a lack of uniformity of terminology and definitions. After 20 years, a new conference has been held. The need to use the same terminology led to the publication by the European Society of Rhinology of the “European Position Paper on the Anatomical Terminology of the Internal Nose and Paranasal Sinuses,” that can be accessed freely at www.rhinologyjournal.com. Professor Valerie Lund et al[2] wrote this document reviewing the anatomical terms, comparing to the “Terminology Anatomica” official order to define the structures without eponyms, while respecting the embryological development and especially universalizing and simplifying the terms. A must-read! The text's purpose lies beyond the review of anatomical terminology to universalize the language used to refer to structures of the nasal and paranasal cavities. Information about the anatomy, based on extensive review of the current literature, is arranged in just over 50 pages, which are direct and to the point. The publication may be pleasant reading for learners and teachers of rhinology. This text can be a starting point and enables searching the universal terminology used in Brazil, seeking to converge with this new European proposal for a nomenclature to help us communicate with our peers in Brazil and the rest of the world. The original text of the European Society of Rhinology provides English terms that avoided the use of Latin, and thus fall beyond several national personal translations. It would be admirable if we created our own cross-cultural adaptation of this new suggested anatomical terminology.

  4. Mistakes in the usage of anatomical terminology in clinical practice.

    Science.gov (United States)

    Kachlik, David; Bozdechova, Ivana; Cech, Pavel; Musil, Vladimir; Baca, Vaclav

    2009-06-01

    Anatomical terminology serves as a basic communication tool in all the medical fields. Therefore Latin anatomical nomenclature has been repetitively issued and revised from 1895 (Basiliensia Nomina Anatomica) until 1998, when the last version was approved and published as the Terminologia Anatomica (International Anatomical Terminology) by the Federative Committee on Anatomical Terminology. A brief history of the terminology and nomenclature development is mentioned, along with the concept and contributions of the Terminologia Anatomica including the employed abbreviations. Examples of obsolete anatomical terms and their current synonyms are listed. Clinicians entered the process of the nomenclature revision and this aspect is demonstrated with several examples of terms used in clinical fields only, some already incorporated in the Terminologia Anatomica and a few obsolete terms still alive in non-theoretical communication. Frequent mistakes in grammar and orthography are stated as well. Authors of the article strongly recommend the use of the recent revision of the Latin anatomical nomenclature both in theoretical and clinical medicine.

  5. Historical evolution of anatomical terminology from ancient to modern.

    Science.gov (United States)

    Sakai, Tatsuo

    2007-06-01

    The historical development of anatomical terminology from the ancient to the modern can be divided into five stages. The initial stage is represented by the oldest extant anatomical treatises by Galen of Pergamon in the Roman Empire. The anatomical descriptions by Galen utilized only a limited number of anatomical terms, which were essentially colloquial words in the Greek of this period. In the second stage, Vesalius in the early 16th century described the anatomical structures in his Fabrica with the help of detailed magnificent illustrations. He coined substantially no anatomical terms, but devised a system that distinguished anatomical structures with ordinal numbers. The third stage of development in the late 16th century was marked by innovation of a large number of specific anatomical terms especially for the muscles, vessels and nerves. The main figures at this stage were Sylvius in Paris and Bauhin in Basel. In the fourth stage between Bauhin and the international anatomical terminology, many anatomical textbooks were written mainly in Latin in the 17th century, and in modern languages in the 18th and 19th centuries. Anatomical terms for the same structure were differently expressed by different authors. The last stage began at the end of the 19th century, when the first international anatomical terminology in Latin was published as Nomina anatomica. The anatomical terminology was revised repeatedly until the current Terminologia anatomica both in Latin and English.

  6. Nomina anatomica. Anatomic terminology and the old French terminology.

    Science.gov (United States)

    Chiapas-Gasca, Karla; Passos, Luiz Fernando De Souza; Euzébio Ribeiro, Sandra Lúcia; Villaseñor-Ovies, Pablo

    A surprising finding in our seminars in Latin America and Spain was that approximately half of the participants continued to use the old French anatomical nomenclature. The substance of this paper is a table in which we compare the anatomical names for the items reviewed in our seminar, in a Spanish version of the old French nomenclature and in the Spanish, Portuguese, and English versions of the currently employed anatomical terms. Copyright © 2012 Elsevier España, S.L. All rights reserved.

  7. Anatomical terminology and nomenclature: past, present and highlights.

    Science.gov (United States)

    Kachlik, David; Baca, Vaclav; Bozdechova, Ivana; Cech, Pavel; Musil, Vladimir

    2008-08-01

    The anatomical terminology is a base for medical communication. It is elaborated into a nomenclature in Latin. Its history goes back to 1895, when the first Latin anatomical nomenclature was published as Basiliensia Nomina Anatomica. It was followed by seven revisions (Jenaiensia Nomina Anatomica 1935, Parisiensia Nomina Anatomica 1955, Nomina Anatomica 2nd to 6th edition 1960-1989). The last revision, Terminologia Anatomica, (TA) created by the Federative Committee on Anatomical Terminology and approved by the International Federation of Associations of Anatomists, was published in 1998. Apart from the official Latin anatomical terminology, it includes a list of recommended English equivalents. In this article, major changes and pitfalls of the nomenclature are discussed, as well as the clinical anatomy terms. The last revision (TA) is highly recommended to the attention of not only teachers, students and researchers, but also to clinicians, doctors, translators, editors and publishers to be followed in their activities.

  8. Toledo School of Translators and their influence on anatomical terminology.

    Science.gov (United States)

    Arráez-Aybar, Luis-Alfonso; Bueno-López, José-L; Raio, Nicolas

    2015-03-01

    Translation facilitates transmission of knowledge between cultures. The fundamental transfer of anatomic terminology from the Ancient Greek and Islamic Golden Age cultures, to medieval Latin Christendom took place in the so-called Toledo School of Translators in the 12th-13th centuries. Translations made in Toledo circulated widely across Europe. They were the foundation of scientific thinking that was born in the boards of first universities. In Toledo, Gerard of Cremona translated Avicenna's Canon of Medicine, the key work of Islamic Golden Age of medicine. Albertus Magnus, Mondino de Luzzi and Guy de Chauliac, the leading authors of anatomical Latin words in the Middle Ages, founded their books on Gerard's translations. The anatomical terms of the Canon retain auctoritas up to the Renaissance. Thus, terms coined by Gerard such as diaphragm, orbit, pupil or sagittal remain relevant in the current official anatomical terminology. The aim of the present paper is to bring new attention to the highly significant influence that the Toledo School of Translators had in anatomical terminology. For this, we shall review here the onomastic origins of a number of anatomical terms (additamentum; coracoid process; coxal; false ribs; femur; panniculus; spondylus; squamous sutures; thorax; xiphoid process, etc.) which are still used today. Copyright © 2015 Elsevier GmbH. All rights reserved.

  9. [Ten years after the latest revision International Anatomical Terminology].

    Science.gov (United States)

    Kachlík, D; Bozdechová, I; Cech, P; Musil, V; Báca, V

    2008-01-01

    Ten years ago, the latest revision of the Latin anatomical nomenclature was approved and published as Terminologia Anatomica (International Anatomical Terminology), and is acknowledged by the organization uniting national anatomical societies--International Federation of Associations of Anatomists. The authors concentrate on new terms included in the nomenclature and on the linguistic changes of terminology. The most frequent errors done by medical specialists in the usage of the Latin anatomical terminology are emphasized and the situation of eponyms in contemporary anatomy is discussed in detail as well. The last version of the nomenclature makes its way very slowly in the professional community and it is necessary to refer to positive changes and advantages it has brought. The usage of this Latin anatomical nomenclature version is suggested by the International Federation to follow in theoretical and clinical fields of medicine. The authors of the article strongly recommend using the recent revision of the Latin anatomical nomenclature both in the oral and written forms, when educating and publishing.

  10. The linguistic roots of Modern English anatomical terminology.

    Science.gov (United States)

    Turmezei, Tom D

    2012-11-01

    Previous research focusing on Classical Latin and Greek roots has shown that understanding the etymology of English anatomical terms may be beneficial for students of human anatomy. However, not all anatomical terms are derived from Classical origins. This study aims to explore the linguistic roots of the Modern English terminology used in human gross anatomy. By reference to the Oxford English Dictionary, etymologies were determined for a lexicon of 798 Modern English gross anatomical terms from the 40(th) edition of Gray's Anatomy. Earliest traceable language of origin was determined for all 798 terms; language of acquisition was determined for 747 terms. Earliest traceable languages of origin were: Classical Latin (62%), Classical Greek (24%), Old English (7%), Post-Classical Latin (3%), and other (4%). Languages of acquisition were: Classical Latin (42%), Post-Classical Latin (29%), Old English (8%), Modern French (6%), Classical Greek (5%), Middle English (3%), and other (7%). While the roots of Modern English anatomical terminology mostly lie in Classical languages (accounting for the origin of 86% of terms), the anatomical lexicon of Modern English is actually much more diverse. Interesting and perhaps less familiar examples from these languages and the methods by which such terms have been created and absorbed are discussed. The author suggests that awareness of anatomical etymologies may enhance the enjoyment and understanding of human anatomy for students and teachers alike. Copyright © 2012 Wiley Periodicals, Inc.

  11. Naming the Soft Tissue Layers of the Temporoparietal Region: Unifying Anatomic Terminology Across Surgical Disciplines

    NARCIS (Netherlands)

    Davidge, Kristen M.; van Furth, Wouter R.; Agur, Anne; Cusimano, Michael

    2010-01-01

    BACKGROUND: The complexity of temporoparietal anatomy is compounded by inconsistent nomenclature. OBJECTIVE: To provide a comprehensive review of the variations in terminology and anatomic descriptions of the temporoparietal soft tissue layers, with the aim of improving learning and communication

  12. Polish, Greek and Cypriot Civil Procedure Terminology in Translation. A Parametric Approach

    Directory of Open Access Journals (Sweden)

    Gortych-Michalak Karolina

    2017-03-01

    Full Text Available The paper discusses the problem of translating selected Civil Procedure terminology from Greek into Polish and from Polish into Greek. The research material includes corpora of normative acts and more precisely those, which regulate Civil Procedure of Poland, Greece and the Republic of Cyprus. The research methodology is based on the concept of parameterisation, according to which the legal linguistic reality becomes axiomatic. Then the set of relevant dimensions and parameters is extracted. The set of parameters are a tool where certain information is given: yes/no/none and thus a clear result of comparison between legal system bond terminology can be drawn up. The results of this comparative analysis provide highly regulated and available translation equivalents, which are essential when legal translation is performed within the frame of legal reality. Selected examples of use of these equivalents are given when discussing the results.

  13. Employment of the anatomical terminology of the Nomina Anatomica in the radiologic literature.

    Science.gov (United States)

    Grignon, B; Roland, J; Braun, M

    1995-01-01

    The purpose of this paper was to assess the relationship of the anatomical terms employed in the radiologic literature to the International Nomenclature derived from the Nomina Anatomica. A critical analysis was made of the anatomical terminology employed in three French and two American journals of radiology. In about 40% of the French journals, the International Anatomical Nomenclature was not adhered to, whereas in 50%, there was no difference in the terms encountered between the French traditional terminology and the French adaptation of the Nomina Anatomica. In contrast, a close adherence to the Nomina Anatomica was observed in the two American journals. The exceptions most frequently encountered are detailed. The aim and principles of the Nomina Anatomica, based on the Latin terminology and aimed at clarification and systematisation, are stressed. The advantages of employing the International Anatomical Nomenclature in medical papers, allowing easy understanding by foreign readers in a world of rapid information exchange are highlighted.

  14. Terminological and Definitional Problems of Deficit and Debt in the Polish and EU Law of Public Finance

    Directory of Open Access Journals (Sweden)

    Ewa Lotko

    2016-06-01

    Full Text Available In the Polish and the EU public finances law there are serious terminological difficulties concerning the deficit and the debt. They arise first from the terminological chaos in this field and second from the parallel application of the EU and the Polish methodology of calculating of deficit and debt. Thus, the paper aims to explain the terminological and definitional problems of deficit and debt in the public finances law using unobtrusive research consisting of the detailed analysis of the Polish and EU legislation. Although there is no doubt that it would be desirable to order the applied terms, in the current legal situation, it would be extremely difficult, as it would require the changes to the Constitution, laws, and modification of translations of UE acts. The solution to the problem, presenting additional advantages, could consist of full transition to the EU methodology by the renouncement from the Polish methodology.

  15. Common usage of cardiologic anatomical terminology: critical analysis and a trilingual discussion proposal.

    Science.gov (United States)

    Werneck, Alexandre Lins; Batigália, Fernando

    2009-01-01

    Terminology and Lexicography have been especially addressed to the Allied Health Sciences regarding discussion of case reports or concerning publication of scientific articles. The knowledge of Human Anatomy enables the understanding of medical terms and the refinement of Medical Terminology makes possible a better anatomicomedical communication in a highly technical level. Most of the scientific publications in both Anatomy and Medicine are found only in English and most of dictionaries or search resources available do not have specificity enough to explain anatomicomedical, terminological, or lexicographical occurrences. To design and produce a multilingual terminological dictionary (Latin-English-Portuguese-Spanish) containing a list of English anatomicomedical terms in common usage in cardiology subspecialties addressed to medical students and professionals, to other allied health sciences professionals, and to translators working in this specific field. Terms, semantical and grammatical components were selected to compose an anatomicocardiological corpus. The adequacy to the thematic terminological research requests and the translation reliability level will be settled from the terminology specificity in contrast to the semantics, as well as from a peer survey of the main terms used by national and international experts in specialized journals, Internet sites, and from text-books on Anatomy and Cardiology. The inclusion criteria will be the terms included in the English, Portuguese, and Spanish Terminologia Anatomica - the official terminology of the anatomical sciences; nonofficial technical commonly used terms which lead to terminology or translation misunderstanding often being a source of confusion. A table with a sample of the 508 most used anatomical cardiologic terms in English language peer-reviewed journals of cardiology and (pediatric and adult) thoracic surgery is shown. The working up of a multilingual terminological dictionary reduces the risk of

  16. Terminologia Anatômica em Ortopedia Anatomic Terminology in Orthopedics

    Directory of Open Access Journals (Sweden)

    Eduardo Murilo Novak

    2008-04-01

    Full Text Available Há grande variação com relação à ortografia de termos científicos em artigos e textos médicos. Visando padronizar esses termos, vigora atualmente a Terminologia Anatômica, publicada pelo Federative Committee on Anatomical Terminology e traduzida pela Comissão de Terminologia Anatômica da Sociedade Brasileira de Anatomia. Este trabalho correlaciona alguns termos usados na linguagem cotidiana com aqueles preconizados pela Nomina Anatomica. Também, discute a necessidade e a possibilidade de essa lista vir a tornar-se referência para escrita de assuntos ortopédicos.The spelling of scientific words in medical papers and textbooks varies a lot. In order to standardize such spelling, we now have the Anatomical Terminology, published by the Federative Committee on Anatomical Terminology, which has been translated into Portuguese by the Terminology Committee of the Brazilian Anatomy Society. This paper correlates some of the words used in daily language to some of the words suggested by the Nomina Anatomica. The paper also discusses the need and the prospects of having such list become the reference of the spelling in orthopedic matters.

  17. [Japanese anatomical terminology (nomina anatomica japonica) from the educational view point (1)--sune and nezumi].

    Science.gov (United States)

    Hojo, T

    1984-12-01

    A few considerations on two Japanese anatomical terms, sune (the anterior part of the leg or the shin in medical terminology) and nezumi (the rat) from the anatomical point of view are made. Japanese words generally have two readings. For example, sune which means the anterior part of the leg, may be read as sune and kei. But kei has two other meanings, the neck and the road. Sune is used more for the anterior part of the leg than kei, especially in classes for beginners of the anatomical course. Nezumi means rat, but is also read as so. Because kei means road, and kan means canal, sokeikan means the rat's tubular passageway, namely, the descent of testis (Descensus testis). In Japanese anatomical terminology the passage of the testis through the inguinal canal is considered similar to a rat going through a passageway. The work sokeikan is better than the English anatomical term inguinal canal which means only the canal in the root of the groin. In Japanese, two words, fukurahagi and komura are used for the posterior part of the leg.

  18. Standard Anatomic Terminologies: Comparison for Use in a Health Information Exchange–Based Prior Computed Tomography (CT) Alerting System

    Science.gov (United States)

    Lowry, Tina; Vreeman, Daniel J; Loo, George T; Delman, Bradley N; Thum, Frederick L; Slovis, Benjamin H; Shapiro, Jason S

    2017-01-01

    Background A health information exchange (HIE)–based prior computed tomography (CT) alerting system may reduce avoidable CT imaging by notifying ordering clinicians of prior relevant studies when a study is ordered. For maximal effectiveness, a system would alert not only for prior same CTs (exams mapped to the same code from an exam name terminology) but also for similar CTs (exams mapped to different exam name terminology codes but in the same anatomic region) and anatomically proximate CTs (exams in adjacent anatomic regions). Notification of previous same studies across an HIE requires mapping of local site CT codes to a standard terminology for exam names (such as Logical Observation Identifiers Names and Codes [LOINC]) to show that two studies with different local codes and descriptions are equivalent. Notifying of prior similar or proximate CTs requires an additional mapping of exam codes to anatomic regions, ideally coded by an anatomic terminology. Several anatomic terminologies exist, but no prior studies have evaluated how well they would support an alerting use case. Objective The aim of this study was to evaluate the fitness of five existing standard anatomic terminologies to support similar or proximate alerts of an HIE-based prior CT alerting system. Methods We compared five standard anatomic terminologies (Foundational Model of Anatomy, Systematized Nomenclature of Medicine Clinical Terms, RadLex, LOINC, and LOINC/Radiological Society of North America [RSNA] Radiology Playbook) to an anatomic framework created specifically for our use case (Simple ANatomic Ontology for Proximity or Similarity [SANOPS]), to determine whether the existing terminologies could support our use case without modification. On the basis of an assessment of optimal terminology features for our purpose, we developed an ordinal anatomic terminology utility classification. We mapped samples of 100 random and the 100 most frequent LOINC CT codes to anatomic regions in each

  19. Contrast in Usage of FCAT-Approved Anatomical Terminology between Members of Two Anatomy Associations in North America

    Science.gov (United States)

    Martin, Bradford D.; Thorpe, Donna; Merenda, Victoria; Finch, Brian; Anderson-Smith, Wendy; Consiglio-Lahti, Zane

    2010-01-01

    Almost 12 years since the publishing of Terminologia Anatomica (TA) by the Federative Committee on Anatomical Terminology (FCAT), there has yet to be a unified adoption of FCAT-recommended anatomical terms by North American anatomists. A survey was sent to members of the Human Anatomy & Physiology Society (HAPS) to compare the frequency of…

  20. Confusing dinosaurs with mammals: tetrapod phylogenetics and anatomical terminology in the world of homology.

    Science.gov (United States)

    Harris, Jerald D

    2004-12-01

    At present, three different systems of anatomical nomenclature are available to researchers describing new tetrapod taxa: a nonstandardized traditional system erected in part by Sir Richard Owen and subsequently elaborated by Alfred Romer; a standardized system created for avians, the Nomina Anatomica Avium (NAA); and a standardized system for extant (crown-group) mammals, the Nomina Anatomica Veterinaria (NAV). Conserved homologous structures widely distributed within the Tetrapoda are often granted different names in each system. The recent shift toward a phylogenetic system based on homology requires a concomitant shift toward a single nomenclatural system also based on both evolutionary and functional morphological homology. Standardized terms employed in the NAA and NAV should be perpetuated as far as possible basally in their respective phylogenies. Thus, NAA terms apply to nonavian archosaurs (or even all diapsids) and NAV terms apply to noncrown-group mammals and more basal synapsids. Taxa equally distant from both avians and crown-group mammals may maintain the traditional nonstandardized terminology until a universal anatomical nomenclature for all tetrapods is constructed. (c) 2004 Wiley-Liss, Inc.

  1. Clarification of Eponymous Anatomical Terminology: Structures Named After Dr Geoffrey V. Osborne That Compress the Ulnar Nerve at the Elbow.

    Science.gov (United States)

    Wali, Arvin R; Gabel, Brandon; Mitwalli, Madhawi; Tubbs, R Shane; Brown, Justin M

    2017-05-01

    In 1957, Dr Geoffrey Osborne described a structure between the medial epicondyle and the olecranon that placed excessive pressure on the ulnar nerve. Three terms associated with such structures have emerged: Osborne's band, Osborne's ligament, and Osborne's fascia. As anatomical language moves away from eponymous terminology for descriptive, consistent nomenclature, we find discrepancies in the use of anatomic terms. This review clarifies the definitions of the above 3 terms. We conducted an extensive electronic search via PubMed and Google Scholar to identify key anatomical and surgical texts that describe ulnar nerve compression at the elbow. We searched the following terms separately and in combination: "Osborne's band," "Osborne's ligament," and "Osborne's fascia." A total of 36 papers were included from 1957 to 2016. Osborne's band, Osborne's ligament, and Osborne's fascia were found to inconsistently describe the etiology of ulnar neuritis, referring either to the connective tissue between the 2 heads of the flexor carpi ulnaris muscle as described by Dr Osborne or to the anatomically distinct fibrous tissue between the olecranon process of the ulna and the medial epicondyle of the humerus. The use of eponymous terms to describe ulnar pathology of the elbow remains common, and although these terms allude to the rich history of surgical anatomy, these nonspecific descriptions lead to inconsistencies. As Osborne's band, Osborne's ligament, and Osborne's fascia are not used consistently across the literature, this research demonstrates the need for improved terminology to provide reliable interpretation of these terms among surgeons.

  2. Terminology for Achilles tendon related disorders

    NARCIS (Netherlands)

    van Dijk, C. N.; van Sterkenburg, M. N.; Wiegerinck, J. I.; Karlsson, J.; Maffulli, N.

    2011-01-01

    The terminology of Achilles tendon pathology has become inconsistent and confusing throughout the years. For proper research, assessment and treatment, a uniform and clear terminology is necessary. A new terminology is proposed; the definitions hereof encompass the anatomic location, symptoms,

  3. Anatomical variations of the coeliac trunk in the homogeneous Polish population.

    Science.gov (United States)

    Torres, K; Staśkiewicz, G; Denisow, M; Pietrzyk, Ł; Torres, A; Szukała, M; Czekajska-Chehab, E; Drop, A

    2015-01-01

    The abdominal vessels show a number of abnormalities and pathologies knowledge of which is important during open as well as laparoscopic surgeries. One of the most common vessels which pattern has many variations is the coeliac trunk. The present study was undertaken on homogeneous population to assess morphology of the coeliac trunk and to evaluate the possible variability of its branches. Standard abdominal multidetector computed tomography examinations were performed on a total of 1569 patients diagnosed by 2 radiologists independently; in case of doubts common assessment was performed. The coeliac trunk followed the classic pattern in 92.7% of the cases (1455/1569 of patients). The gastrosplenic trunk was detected in 4.1% of cases (64/1569); the hepatosplenic trunk in 2.2% of cases (34/1569); the coeliac-mesenteric trunk was observed in 0.5% of cases (8/1569); the hepatogastric trunk in 0.2% of cases (4/1569); the splenomesenteric trunk was detected in 0.1% of cases (2/1569). In the next 0.1% the coeliac trunk was absent. The hepatosplenomesenteric and the coeliac-colic trunk were not observed in the study population. Vascular anatomical abnormality is usually asymptomatic hovewer, its preoperative knowledge is helpful to reduce complications like vascular bleeding when dissecting the hapato-pancreatic region. The coeliac trunk and its branches can be fast and easy evaluated in computed tomography exams performed due to various symptoms from abdominal cavity.

  4. From Research on the Musical “Trans-avant-garde”: A Contribution to the Discussion on the Terminology Concerning the Historiography of 20th Century Polish Music

    Directory of Open Access Journals (Sweden)

    Monika Karwaszewska

    2006-10-01

    Full Text Available The research article discusses the concept of “the trans-avant-garde” (a term coined by the Italian art critic Achille Bonito Oliva to describe certain phenomena in visual arts, especially painting, which have appeared since the end of the 1970s and attempts to adapt it for a discussion of twentieth century Polish music. The trans-avant-garde (Italian la transavanguardia is an Italian form of expressionism in art (neo-expressionism, originating as a rejection of modernism, formalism, innovation, originality, and stylistic coherence, which began to treat tradition in a new way, extensively referring to 16th century mannerisms, ambiguity, stylistic pluralism and polysemy. While, on the one hand, trans-avant-garde artists are fully aware of the crisis of the avantgarde experiment, on the other, they aim to create content-packed works of deeply expressive and romantic character. The trans-avant-garde is widely considered to be an early stage of postmodernism, or simply its synonym. There is a difference, though, between the trans-avant-garde and the postmodern. Oliva speaks of a journey from America to Europe and back. My article discusses these differences, systematizes the most important stylistic aspects and aesthetic ideas, and applies these observations to the study of music—a discipline Oliva did not take into consideration. A key issue in the description of the trans-avant-garde in Polish music is analysis of the trends that precede it, are synchronous with it, and follow it in history. It is also important to trace borrowings and differences along this time axis. In order to offer an insight of this kind, I first present the different concepts of “modernity” and “postmodernity” that have appeared in music (and art of the twentieth century, and I then juxtapose those with the Italian original idea of la transavanguardia.

  5. Making anatomic terminology of the prostate and contiguous structures clinically useful: historical review and suggestions for revision in the 21st century.

    Science.gov (United States)

    Myers, Robert P; Cheville, John C; Pawlina, Wojciech

    2010-01-01

    Herein we review nomenclature of the prostate and contiguous structures in each of the 10 official publications from the 1895 [Basel] Nomina Anatomica to the 1998 Terminologia Anatomica. We then compare existing clinical terminology with official terminology endorsed by anatomists over the years with a goal to modernize official terminology. Problematic terms, namely, lobes and lobuli, fascia versus capsule, Denonvilliers' fascia, and transition versus periurethral zone, are addressed. The idea of recognizing prostate arteries, veins, nerves, and neurovascular bundles is introduced. Prostatic and membranous urethras and the closely related external urethral sphincter are covered. We believe urogenital hiatus should also be called anterior levator hiatus. Trapezoid zone should be discarded in future editions of nomenclature. Our recommended changes are supported by a series of pertinent photographs of gross and whole mount histologic specimens and magnetic resonance images. Finally, we provide a new table of terms for the prostate with recommended amendments and deletions to existing official nomenclature as contained in the 1998 Terminologia Anatomica.

  6. Pediatric Terminology

    Science.gov (United States)

    The National Institute of Child Health and Human Development (NICHD) works with NCI Enterprise Vocabulary Services (EVS) to provide standardized terminology for coding pediatric clinical trials and other research activities.

  7. ''Hazardous'' terminology

    International Nuclear Information System (INIS)

    Powers, J.

    1991-01-01

    A number of terms (e.g., ''hazardous chemicals,'' ''hazardous materials,'' ''hazardous waste,'' and similar nomenclature) refer to substances that are subject to regulation under one or more federal environmental laws. State laws and regulations also provide additional, similar, or identical terminology that may be confused with the federally defined terms. Many of these terms appear synonymous, and it easy to use them interchangeably. However, in a regulatory context, inappropriate use of narrowly defined terms can lead to confusion about the substances referred to, the statutory provisions that apply, and the regulatory requirements for compliance under the applicable federal statutes. This information Brief provides regulatory definitions, a brief discussion of compliance requirements, and references for the precise terminology that should be used when referring to ''hazardous'' substances regulated under federal environmental laws. A companion CERCLA Information Brief (EH-231-004/0191) addresses ''toxic'' nomenclature

  8. On the new anatomical nomenclature.

    Science.gov (United States)

    Marecková, E; Simon, F; Cervený, L

    2001-05-01

    The present paper is concerned with the linguistic aspect of the new anatomical nomenclature (Terminologia Anatomica 1998). Orthographic, morphological, syntactic, lexical, and terminological comments are presented. In the authors' opinion, shortcomings might have been effectively avoided by cooperation with linguists.

  9. E-terminology*

    African Journals Online (AJOL)

    rbr

    Abstract: This article addresses computer applications in terminology and terminography. Terminologists aim at creating ... engineering, machine translation, multilingual markets in education, business, science and technology. At present ..... management paved the way for mobile terminology. It is already possible for.

  10. Terminologia anatomica: new terminology for the new anatomist.

    Science.gov (United States)

    Whitmore, I

    1999-04-15

    Over many years, anatomical terminology has been the subject of much controversy and disagreement. Previously, the International Anatomical Nomenclature Committee has been responsible for the production of six editions of Nomina Anatomica. In 1989 a new committee, the Federative Committee on Anatomical Terminology (FCAT), was created by its parent body, the International Federation of Associations of Anatomists (IFAA). FCAT has worked for 9 years and published Terminologia Anatomica (TA) in 1998. FCAT's aim has been to democratize the terminology and make it the internationally accepted, living language of anatomy. The worldwide adoption of the same terminology would eliminate national differences, which were causing extreme confusion in instances where the same structure was known by several names. The new terminology is thus the result of worldwide consultation and contains Latin and equivalent English terms. It is indexed in Latin and English and contains an index of eponyms in order to find the correct non-eponymous term. The future goal of FCAT is to continue to improve the terminology-new structures are described, different terms come into use, and the terminology needs to be expanded to include terms used by clinicians for structures that currently do not appear in the list. Future versions of the terminology must accommodate the needs of all who use it, both in the clinical and scientific worlds.

  11. Terminology and forensic gait analysis.

    Science.gov (United States)

    Birch, Ivan; Vernon, Wesley; Walker, Jeremy; Young, Maria

    2015-07-01

    The use of appropriate terminology is a fundamental aspect of forensic gait analysis. The language used in forensic gait analysis is an amalgam of that used in clinical practice, podiatric biomechanics and the wider field of biomechanics. The result can often be a lack of consistency in the language used, the definitions used and the clarity of the message given. Examples include the use of 'gait' and 'walking' as synonymous terms, confusion between 'step' and 'stride', the mixing of anatomical, positional and pathological descriptors, and inability to describe appropriately movements of major body segments such as the torso. The purpose of this paper is to share the well-established definitions of the fundamental parameters of gait, common to all professions, and advocate their use in forensic gait analysis to establish commonality. The paper provides guidance on the selection and use of appropriate terminology in the description of gait in the forensic context. This paper considers the established definitions of the terms commonly used, identifies those terms which have the potential to confuse readers, and suggests a framework of terminology which should be utilised in forensic gait analysis. Copyright © 2015 Forensic Science Society. Published by Elsevier Ireland Ltd. All rights reserved.

  12. Fascia: an illustrative problem in international terminology.

    Science.gov (United States)

    Wendell-Smith, C P

    1997-01-01

    As a result of international nomenclatures being in Latin, with the terms usually being undefined and translated into national vernacular languages, the same terms have been used in different ways in different countries. Fascia is an example of this, the limits of the meaning of the word differing in English-, French- and German-speaking countries. These differences are itemized in a comparative table. In 1989 the General Assembly of the International Federation of Associations of Anatomists [IFAA] created the Federative Committee on Anatomical Terminology [FCAT] with a remit to create a new terminology for the anatomical sciences with full democratic consultation with the member societies of IFAA. The draft recommendations of FCAT on fascia and the reasons for them are given. Problems associated with the use, or lack of use, of international terminologies are illustrated. For the advancement of medical knowledge and understanding, the cooperation of authors, editors and publishers in using the current terminology in the right way remains of critical importance. It is suggested that, after adopting a terminology, IFAA has a responsibility to arrange for technical back-up.

  13. Merge of terminological resources

    DEFF Research Database (Denmark)

    Henriksen, Lina; Braasch, Anna

    2012-01-01

    In our globalized world, the amount of cross-national communication increases rapidly, which also calls for easy access to multi-lingual high quality terminological resources. Sharing of terminology resources is currently becoming common practice, and efficient strategies for integration – or mer...

  14. Polish visit

    CERN Document Server

    2003-01-01

    On 6 October, Professor Michal Kleiber, Polish Minister of Science and Chairman of the State Committee for Scientific Research, visited CERN and met both the current and designated Director General, Luciano Maiani and Robert Aymar. Professor Kleiber visited the CMS and ATLAS detector assembly halls, the underground cavern for ATLAS, and the LHC superconducting magnet string test hall. Michal Kleiber (left), Polish minister of science and Jan Krolikowski, scientist at Warsaw University and working for CMS, who shows the prototypes of the Muon Trigger board of CMS.

  15. Federal Medication Terminologies

    Science.gov (United States)

    Federal Medication (FedMed) collaboration of 8 partner agencies agreed on a set of standard, comprehensive, freely and easily accessible FMT terminologies to improve the exchange and public availability of medication information.

  16. Merge of terminological resources

    DEFF Research Database (Denmark)

    Henriksen, Lina; Braasch, Anna

    2012-01-01

    In our globalized world, the amount of cross-national communication increases rapidly, which also calls for easy access to multi-lingual high quality terminological resources. Sharing of terminology resources is currently becoming common practice, and efficient strategies for integration...... – or merging – of terminology resources are strongly needed. This paper discusses prerequisites for successful merging with the focus on identification of candidate duplicates of a subject domain found in the resources to be merged, and it describes automatic merging strategies to be applied to such duplicates...... in electronic terminology resources. Further, some perspectives of manual, supplementary assessment methods supporting the automatic procedures are sketched. Our considerations are primarily based on experience gained in the IATE and EuroTermBank projects, as merging was a much discussed issue in both projects....

  17. Common usage of cardiologic anatomical terminology: critical analysis and a trilingual discussion proposal Uso comum da terminologia anatômica cardiológica: análise crítica e proposta de discussão trilingue

    Directory of Open Access Journals (Sweden)

    Alexandre Lins Werneck

    2009-09-01

    Full Text Available BACKGROUND: Terminology and Lexicography have been especially addressed to the Allied Health Sciences regarding discussion of case reports or concerning publication of scientific articles. The knowledge of Human Anatomy enables the understanding of medical terms and the refinement of Medical Terminology makes possible a better anatomicomedical communication in a highly technical level. Most of the scientific publications in both Anatomy and Medicine are found only in English and most of dictionaries or search resources available do not have specificity enough to explain anatomicomedical, terminological, or lexicographical occurrences. OBJECTIVE: To design and produce a multilingual terminological dictionary (Latim-English-Portuguese-Spanish containing a list of English anatomicomedical terms in common usage in cardiology subspecialties addressed to medical students and professionals, to other allied health sciences professionals, and to translators working in this specific field. METHODS: Terms, semantical and grammatical components were selected to compose an anatomicocardiological corpus. The adequacy to the thematic terminological research requests and the translation reliability level will be settled from the terminology specificity in contrast to the semantics, as well as from a peer survey of the main terms used by national and international experts in specialized journals, Internet sites, and from text-books on Anatomy and Cardiology. The inclusion criteria will be the terms included in the English, Portuguese, and Spanish Terminologia Anatomica - the official terminology of the anatomical sciences; nonofficial technical commonly used terms which lead to terminology or translation misunderstanding often being a source of confusion. RESULTS: A table with a sample of the 508 most used anatomical cardiologic terms in English language peer-reviewed journals of cardiology and (pediatric and adult thoracic surgery is shown. CONCLUSIONS: The

  18. Morphing Terminology Study

    Energy Technology Data Exchange (ETDEWEB)

    Rose, Stuart J.; Brockman, Fred J.; Hart, Michelle L.; Engel, David W.; Valentine, Nancy B.; Calapristi, Augustin J.

    2010-06-28

    This study investigates methods of automatically identifying and characterizing significant transitions in term usage over time. Within scientific literature, the occurrence of terms reflects the use of technologies and techniques as well as the study of specific species and materials. Transitions in terminology usage may be a result of vocabulary standardization or specialization in which terms are replaced with their shorter form. They may also be a result of new applications, combinations, alternatives, or interests that result in the appearance of new or existing terminology in unexpected contexts.

  19. Merge of terminological resources

    DEFF Research Database (Denmark)

    Henriksen, Lina; Braasch, Anna

    2012-01-01

    – or merging – of terminology resources are strongly needed. This paper discusses prerequisites for successful merging with the focus on identification of candidate duplicates of a subject domain found in the resources to be merged, and it describes automatic merging strategies to be applied to such duplicates...... in electronic terminology resources. Further, some perspectives of manual, supplementary assessment methods supporting the automatic procedures are sketched. Our considerations are primarily based on experience gained in the IATE and EuroTermBank projects, as merging was a much discussed issue in both projects....

  20. Approximating terminological queries

    NARCIS (Netherlands)

    Stuckenschmidt, Heiner; Van Harmelen, Frank

    2002-01-01

    Current proposals for languages to encode terminological knowledge in intelligent systems support logical reasoning for answering user queries about objects and classes. An application of these languages on the World Wide Web, however, is hampered by the limitations of logical reasoning in terms

  1. Terminology in the Making

    DEFF Research Database (Denmark)

    Ørum, Tania

    2017-01-01

    Pop art seems to be a more prevalent term in Sweden, whereas in Denmark the dominant term was minimalism. However, some of the problems of developing a terminology and agreeing on a description of the new art movements in the 1960s seem to exist in the American context as well....

  2. Terminology in South Africa*

    African Journals Online (AJOL)

    The tenninology of any subject field (physics, mathematics, biology .... tree umthi umuthi isihlahla setlhare mohlare sefate muri murhi. Dimensions of terminology: Relation between object, concept, definition and term. R eprod u ced by Sa bin ..... only) organisation in South Africa which devotes its time entirely to terminol-.

  3. THE TERMINOLOGY OF LIBRARY SCIENCE

    OpenAIRE

    Љиљана Матић

    2014-01-01

    The master’s thesis entitled The Terminology of Library Science presents the general state of the terminology of library science in the Serbian language and analyses the terminological system which was formed in the last couple of decades in relation to library and information science. The terminology of library science is seen as a characteristic of professional language. The research is conducted on a corpus which excludes sources relating extremely to either library science or information ...

  4. [ORGANIZATIONAL COMMITMENT AND WORK ENGAGEMENT - THEORETICAL CONCEPTIONS AND TERMINOLOGICAL PROBLEMS].

    Science.gov (United States)

    Łaguna, Mariola; Mielniczuk, Emilia; Żaliński, Adam; Wałachowska, Karolina

    2015-01-01

    Engagement in professional activities and positive attitudes towards an organization are of significant importance to functioning and health of employees. Studies analysing the phenomena of employees' engagement and their relations with an organization undergo a dynamic development in both international and Polish research. Two theoretical conceptions: organizational commitment (by Meyer and Allen) and work engagement (by Schaufeli and Bakker) have become prominent in the field. They capture 2 similar, albeit distinct constructs. In English-language journals academics concentrate on theoretical and empirical analyses of similarities and differences between the 2 concepts, while in Polish publications scholars also have to deal with the issue of the original term translation. The problem lies mostly in Polish nomenclature of the dimensions proposed in both of these conceptions. Lack of common translations for different studies may cause confusion in this area of research. In the paper authors present a review of Polish translations of terms used in the discussed conceptions and a linguistic analysis of terms, both in English and in Polish. Authors provide solutions which could help to clarify terminology in Polish-language publications concerning organizational commitment and work engagement. This allows for further development of research in this field.

  5. Novel femoral artery terminology: integrating anatomy and clinical procedures leading to standardized intuitive nomenclature.

    Science.gov (United States)

    Benninger, Brion

    2014-10-01

    The objective of this study is to investigate the terminology of the femoral artery and recommended alternative terminology that satisfies both anatomy and clinical arenas.The femoral artery (FA) is often defined as the continuation of the external iliac artery. Specifically, when the external iliac artery reaches directly beneath the inguinal ligament, it becomes the FA. Currently, Terminologia Anatomica (TA) records the profunda femoris or deep femoral as a terminal branch. Clinicians often use superficial femoral artery (SFA) rather than FA and profunda or deep FA. SFA is actually very deep and well protected for most of its journey. On observation, the terminology in current use is not intuitive. The objective of this study was to investigate the terminology associated with the anatomical and clinical anatomical interpretations of the FA and its terminal branches and to suggest a more appropriate terminology that addresses the points of view of the macro anatomist, as well as that of the clinician. Literature search was conducted regarding the nomenclature of the FA and its terminal branches. Dissection of 89 embalmed cadavers (49F, 40M, ages 47-89) was conducted to analyze the morphology of the FA and its branches. Perusal of the literature revealed a difference in terminology between anatomical and clinical textbooks/atlases/journals regarding the FA and its terminal branch. Our dissections suggested that the FA may be better defined vis-à-vis its relationship to the anterior and posterior compartments of the thigh. A difference in terminology exists between the anatomical and clinical arenas. A need for a standardized terminology is necessary because clinicians and their publishers have not adopted TA. This study suggests that the current FA be considered the common FA and the continuation of the FA, the SFA be renamed the anterior FA and the current profunda (the deep FA) be renamed the posterior FA, respectively. The proposed terminology mirrors the lower

  6. Croatian Analytical Terminology

    Directory of Open Access Journals (Sweden)

    Kastelan-Macan; M.

    2008-04-01

    Full Text Available Results of analytical research are necessary in all human activities. They are inevitable in making decisions in the environmental chemistry, agriculture, forestry, veterinary medicine, pharmaceutical industry, and biochemistry. Without analytical measurements the quality of materials and products cannot be assessed, so that analytical chemistry is an essential part of technical sciences and disciplines.The language of Croatian science, and analytical chemistry within it, was one of the goals of our predecessors. Due to the political situation, they did not succeed entirely, but for the scientists in independent Croatia this is a duty, because language is one of the most important features of the Croatian identity. The awareness of the need to introduce Croatian terminology was systematically developed in the second half of the 19th century, along with the founding of scientific societies and the wish of scientists to write their scientific works in Croatian, so that the results of their research may be applied in economy. Many authors of textbooks from the 19th and the first half of the 20th century contributed to Croatian analytical terminology (F. Rački, B. Šulek, P. Žulić, G. Pexidr, J. Domac, G. Janeček , F. Bubanović, V. Njegovan and others. M. DeŢelić published the first systematic chemical terminology in 1940, adjusted to the IUPAC recommendations. In the second half of 20th century textbooks in classic analytical chemistry were written by V. Marjanović-Krajovan, M. Gyiketta-Ogrizek, S. Žilić and others. I. Filipović wrote the General and Inorganic Chemistry textbook and the Laboratory Handbook (in collaboration with P. Sabioncello and contributed greatly to establishing the terminology in instrumental analytical methods.The source of Croatian nomenclature in modern analytical chemistry today are translated textbooks by Skoog, West and Holler, as well as by Günnzler i Gremlich, and original textbooks by S. Turina, Z.

  7. Metal polish poisoning

    Science.gov (United States)

    Metal polishes are used to clean metals, including brass, copper, or silver. This article discusses the harmful effects from swallowing metal polish. This article is for information only. DO NOT use ...

  8. Williamson Polishing & Plating Site

    Science.gov (United States)

    Williamson Polishing & Plating Co. Inc. was a plating shop located in the Martindale-Brightwood neighborhood of Indianapolis. The facility conducted job shop polishing and electroplating services. The vacant site contains a 14,651-square-foot building.

  9. INIS: Terminology charts

    International Nuclear Information System (INIS)

    1970-08-01

    This document is one in a series of publications known as the INIS Reference Series. It is to be used in conjunction with the INIS indexing manual and the INIS thesaurus for the preparation of input to the INIS database. The thesaurus and terminology charts in their first edition (Rev.0) were produced as the result of an agreement between the International Atomic Energy Agency (IAEA) and the European Atomic Energy Community (Euratom). Except for minor changes the terminology and the interrelationships between terms are those of the December 1969 edition of the Euratom Thesaurus. The purpose of the terminology harts is to display the descriptors of the thesaurus in the context of their hierarchical and other semantic relationships. Hierarchically related terms are grouped in clusters, each representing one of the principal concepts of a subject field. The descriptors are grouped around or under the broadest term of the clusters which is printed in upper case. The hierarchical relationships within the clusters are shown by the arrangement of the terms in smaller boxes within the larger boxes circumscribing the clusters. The clusters are connected by lines of various thickness, representing the other (mostly non-hierarchical) relationships. These connections are the equivalent to 'see also' and 'related term' cross-references. The thickness of the lines represents the strength of the semantic relations, or, in the practice of a retrieval system the probability that one term replacing a connected term in a query, will still yield pertinent references. The figures accompanying the descriptors represent their frequency of assignment to the first 987,000 documents stored in the Euratom system (May 1970). They are presented in order to show the relative importance of the descriptors within the subject field. The asterisks (*) accompanying descriptors in the charts refer to descriptors, for which a scope note can be found in the INIS: Thesaurus at the time the charts went

  10. Technical Translation and Industrial Terminology

    Science.gov (United States)

    Longyka, Tomaz

    1973-01-01

    Paper presented at the symposium on The Importance and Problems of Translation in Sciences, Technology, and Economic Life.'' in Ohrid, Yugoslavia. Argues for the adoption of artificial languages as an international terminological means in science and technology. (RS)

  11. Nuclear terminology during forty years

    International Nuclear Information System (INIS)

    Sjoestrand, N.G.

    1994-04-01

    In Sweden terminology work in the field of nuclear technology started in the early 1950s. Three dictionaries were completed in 1962, 1975 and 1990, respectively, mainly through cooperation between Swedish Mechanical Standards Institution (SMS) and Swedish Centre for Technical Terminology (TNC). In parallel to this, international work has been performed through the International Organization for Standardization (ISO). In conclusion, problems concerning some special terms are discussed. 17 refs

  12. Sport supporting act: terminology issues

    Directory of Open Access Journals (Sweden)

    Petr Vlček

    2013-01-01

    Full Text Available BACKGROUND: The text deals with terminology issues from an interdisciplinary point of view. It is based on two different disciplines, law and kinanthropology, in an area of their overlap. AIM: The aim of the author is to point out some possible legislative problems, which could arise due to the current reading of the sport supporting act (Act no. 115/2001. The second aim of the author is to contribute to the discussion of kinantropologists (possibly also the educational researchers and lawyers and to stress the importance of the systematic approach to terminology formulation. METHODS: The author uses the method of language interpretation. We also use the basic analytical methods, induction and deduction, while we stress the systematic approach to the term formulation. RESULTS: The analysis of the sport supporting act terminology shows some specific legislative problems, which could arise due to the definition of sport in the sport supporting act. The author discusses a possible alternative solution. CONCLUSION: According to the opinion of the author, clear, obvious and unified terminology of kinantropologists as specialists in their discipline should represent a source, from which other sciences could derive their terminology. Defined and inexpert terminology used in other disciplines should not be used as an argument for its adopting in kinanthropology.

  13. Terminology Management at the National Language Service

    African Journals Online (AJOL)

    Through the use of correct, standard- ised terminology, effective scientific and technical communication skills are developed. A brief overview is given of terminology development in South Africa, with special emphasis on the work of the Terminology Division of the National Language Service. Aspects of present terminology.

  14. Terminology in South Africa | Alberts | Lexikos

    African Journals Online (AJOL)

    This article deals with terminology and terminography in South Africa. It gives the different meanings attached to the term terminology and describes points of difference between terminology and terminography. It focuses on the dimensions of terminology, namely the cognitive, linguistic and communicative dimension.

  15. Training programming: revisiting terminology

    Directory of Open Access Journals (Sweden)

    Mário C. Marques

    2017-11-01

    widely defined or justified in literature. In fact, these terms have caused confusion in the day-to-day training and in the academic community, arising many different visions about the same term. By instance, we can assume that a macro cycle can have duration of 4, 6, 8, 12 weeks or even a year. Nevertheless, the problem of training programming lies not in the way how the training period is called, but in its real meaning, that is, the way of organizing and monitoring the training load in order to reach the best physical shape, and if that is possible, within the defined deadline. In connection with the above, it would be even more inappropriate to use the ATR terminology (accumulation, transformation and realization or the terms “integrated” or “concentrated” related to the training cycle because they lead many trainers to put these in practice, misleading them to think they are making a good planning. To the best of our knowledge, we do not know any study analyzing or providing scientific evidences that allow us to know with precision what, how and when the athletes concretely accumulate, transform and realize a set of physical and physiological strength or endurance variables, or any other motor skills, during training period. Thus, these terms never should be used because they are false, add nothing new to training process and are inappropriate to denominate biological processes, types of training or effects of such training programs. In fact, the aim of all training sessions is (or should be to accumulate, transform (or rather, transfer and realize continuously training stimuli that allows improve the physical performance of athletes. For these reasons, it is meaningless to say about a physical capacity that it is firstly accumulated, then it is transformed (or transferred and finally it is realized.  Only an atrocious ignorance of the basic physiological fundamentals of adaptation, and goals and principles of training, could originate such a misconception

  16. Understanding anatomical terms.

    Science.gov (United States)

    Mehta, L A; Natrajan, M; Kothari, M L

    1996-01-01

    Words are our masters and words are our slaves, all depending on how we use them. The whole of medical science owes its origin to Greco-Roman culture and is replete with terms whose high sound is not necessarily accompanied by sound meaning. This is even more the case in the initial, pre-clinical years. Anatomical terminology seems bewildering to the initiate; and maybe that is a reason why love of anatomy as a subject does not always spill over through later years. Employing certain classifications of the origin of the anatomical terms, we have prepared an anthology that we hope will ease the student's task and also heighten the student's appreciation of the new terms. This centers on revealing the Kiplingian "how, why, when, where, what, and who" of a given term. This presentation should empower students to independently formulate a wide network of correlations once they understand a particular term. The article thus hopes to stimulate students' analytic and synthetic faculties as well. A small effort can reap large rewards in terms of enjoyment of the study of anatomy and the related subjects of histology, embryology, and genetics. It is helpful to teachers and students alike. This exercise in semantics and etymology does not demand of the student or his teacher any background in linguistics, grammar, Greek, Latin, Sanskrit, anatomy, or medicine.

  17. Frequency in Usage of FCAT-Approved Anatomical Terms by North American Anatomists

    Science.gov (United States)

    Martin, Bradford D.; Thorpe, Donna; Barnes, Richard; DeLeon, Michael; Hill, Douglas

    2009-01-01

    It has been 10 years since the Federative Committee on Anatomical Terminology (FCAT) published Terminologia Anatomica (TA), the current authority on anatomical nomenclature. There exists a perceived lack of unity among anatomists to adopt many FCAT recommended anatomical terms in TA. An e-mail survey was sent to members of the American Association…

  18. The Changes in Architecture Terminology

    Directory of Open Access Journals (Sweden)

    Francois Tran

    2012-10-01

    Full Text Available The intention of this research is to inspire a discussion about the changes in architecture terminologywith the revolution in communication and representation forms as a result of digitalisation.The blurred boundary between the virtual and the analogue worlds, the misunderstandings andthe confusion that appear with the interaction of these two worlds nowadays form the major problems facing architectural design, education and research. The researchers in this field arefocused on the interface, the meeting and the transformation point between the digital and analogue worlds in order to prevent those problems and confusions. One of the main reasonsof this ambiguity is the architectural terminology that changes according to the changing status of architectural representation i.e. new forms of representation; new forms of communicationi.e. the new role of the architect and the researcher.Whenever and wherever information and knowledge specialised is created, communicated ortransformed terminology is involved in a way or another. An absence of terminology is combined with an absence of an understanding of concepts. Therefore with the new information and communication technologies; new and developing subject areas the existence of terminology and its update is indispensable. Thus the changing status of the terminology must be analysed. As architecture terminology is essential to improve today’s challenging, multidisciplinary communication in order to clarify the problems of ambiguity and unawareness (as a result of shift of specific architectural vocabulary it is necessary to analyse the changes in the architectural terminology which will form the discussion point of the following paper.As this paper is the beginning step of a research project which started on the occasion of the conference proposed by EAAE/ARCC we will here present only the objectives of this research,its general problematics, the methods that we wish to develop and some provisional

  19. The wear of polished and glazed zirconia against enamel.

    Science.gov (United States)

    Janyavula, Sridhar; Lawson, Nathaniel; Lawson, Nathaniel; Cakir, Deniz; Beck, Preston; Ramp, Lance C; Burgess, John O

    2013-01-01

    The wear of tooth structure opposing anatomically contoured zirconia crowns requires further investigation. The purpose of this in vitro study was to measure the roughness and wear of polished, glazed, and polished then reglazed zirconia against human enamel antagonists and compare the measurements to those of veneering porcelain and natural enamel. Zirconia specimens were divided into polished, glazed, and polished then reglazed groups (n=8). A veneering porcelain (Ceramco3) and enamel were used as controls. The surface roughness of all pretest specimens was measured. Wear testing was performed in the newly designed Alabama wear testing device. The mesiobuccal cusps of extracted molars were standardized and used as antagonists. Three-dimensional (3D) scans of the specimens and antagonists were obtained at baseline and after 200 000 and 400 000 cycles with a profilometer. The baseline scans were superimposed on the posttesting scans to determine volumetric wear. Data were analyzed with a 1-way ANOVA and Tukey Honestly Significant Difference (HSD) post hoc tests (α=.05) Surface roughness ranked in order of least rough to roughest was: polished zirconia, glazed zirconia, polished then reglazed zirconia, veneering porcelain, and enamel. For ceramic, there was no measureable loss on polished zirconia, moderate loss on the surface of enamel, and significant loss on glazed and polished then reglazed zirconia. The highest ceramic wear was exhibited by the veneering ceramic. For enamel antagonists, polished zirconia caused the least wear, and enamel caused moderate wear. Glazed and polished then reglazed zirconia showed significant opposing enamel wear, and veneering porcelain demonstrated the most. Within the limitations of the study, polished zirconia is wear-friendly to the opposing tooth. Glazed zirconia causes more material and antagonist wear than polished zirconia. The surface roughness of the zirconia aided in predicting the wear of the opposing dentition

  20. Terminology versus action (Editorial

    Directory of Open Access Journals (Sweden)

    Lindsay Glynn

    2006-12-01

    Full Text Available I have heard it said, as many of us have, that evidence based library and information practice is an area dominated and led by librarians in the health sciences. It is a logical leap to say that medical librarians may be more familiar with the evidence based model of practice because of their need to be familiar, on some level, with evidence based medicine. The idea of making a decision based on the appropriate evidence is as familiar to a medical librarianas is how to effectively search PubMed. How pervasive is the influence of the medical profession on this area? Being a librarian looking for quick information, I turned to Google. The results on the first two pages from a Google search for evidence based practice are 100% health/medicine related. Being a good librarian, I refined my search to see how the results would differ, and I added the term library to the search. This time there were 75% health/medicine results and 5% representing evidence based library and information practice (eblip. Note that a high percentage of the health/medicine hits were library webpages on evidence based medicine. Being an obsessive‐compulsive librarian, I changed my search strategy again by replacing library with librarianship. This time there were 30% health/medicine results and 65% eblip. A final search for evidence based information had this journal as the top hit. Being a busy librarian with a lot of work to do, I stopped right there. OK, so the terminology appears to point strongly in one direction and weighs heavily on the health sciences penetration. Let’s leave terminology aside for a moment and look at action. Since Evidence Based Library and Information Practice is the first journal on this topic, the list of contributors and their backgrounds should give an indication on whether or not there is a concentration of medical librarians. Approximately two thirds of the articles that we have published are non‐health/medicine related. Only 29% of our

  1. Gyration of the feline brain: localization, terminology and variability.

    Science.gov (United States)

    Pakozdy, A; Angerer, C; Klang, A; König, E H; Probst, A

    2015-12-01

    The terminology of feline brain gyration is not consistent and individual variability has not been systematically examined. The aim of the study was to identify the gyri and sulci of cat brains and describe them using the current terminology. The brains of 15 cats including 10 European shorthairs, 2 Siamese, 2 Maine coons and one Norvegian forest cat without clinical evidence of brain disease were examined post-mortem and photographed for documentation. For description, the terms of the most recent Nomina Anatomica Veterinaria (NAV, 2012) were used, and comparisons with previous anatomical texts were also performed. In addition to the lack of comparative morphology in the NAV, veterinary and human nomenclature are used interchangeably and inconsistently in the literature. This presents a challenge for neurologists and anatomists in localizing gyri and sulci. A comparative analysis of brain gyration showed only minor individual variability among the cats. High-quality labelled figures are provided to facilitate the identification of cat brain gyration. Our work consolidates the current and more consistent gyration terminology for reporting the localization of a cortical lesion based on magnetic resonance imaging or histopathology. This will facilitate not only morphological but also functional research using accurate anatomical reporting. © 2014 Blackwell Verlag GmbH.

  2. Polish Cartographical Review

    Directory of Open Access Journals (Sweden)

    Nedjeljko Frančula

    2017-07-01

    Full Text Available The Polish Cartographical Review (PCR journal has been published in English four times a year since 2015. The journal is in open access and it is published by De Gruyter Open. It is edited by Polish scientists in collaboration with international experts.

  3. Collections for terminology in chemistry

    International Nuclear Information System (INIS)

    1974-08-01

    This book describes terminology in chemistry, which is divided into seven chapters. The contents of this book are element name, names of an inorganic compound such as ion and radical and polyacid, an organic compound on general principle and names, general terminology 1 and 2, unit and description method on summary, unit and the symbol for unit, number and pH, Korean mark for people's name in chemistry, names of JUPAC organic compound of summary, hydrocarbons, fused polycyclic hydrocarbons, bridged hydrocarbons, cyclic hydrocarbons with side chains, terpenes hydrocarbons, fundamental heterocyclic systems and heterocyclic spiro compounds.

  4. User Experimentation with Terminological Ontologies

    DEFF Research Database (Denmark)

    Pram Nielsen, Louise

    This paper outlines work-in-progress research suggesting that domain-specific knowledge in terminological resources can be transferred efficiently to end-users across different levels of expertise and by means of different information modes including articles (written mode) and concept diagrams...... (graph mode). An experimental approach is applied in an eye-tracking laboratory, where a natural user situation is replicated for Danish professional potential end-users of a ter-minology and knowledge bank in a chosen pilot domain (taxation)....

  5. Proposal of anatomical terminology to call the arteries of the base of the encephalon in the monkey (Cebus paella L., 1766 Nomenclatura proposta para denominar as artérias da base do encéfalo do macaco-prego (Cebus apella L., 1766

    Directory of Open Access Journals (Sweden)

    Jussara Rocha Ferreira

    2001-05-01

    Full Text Available Arteries of the encephalon basis of 30 monkeys (Cebus paella were studied. Arteries were injected with colored latex, fixed in formaldehyde solution at 10% and dissected under magnifying lenses. Since the animals died from natural causes they had been previously used in other experiments. Human and veterinary anatomical terminology and literature were used as a reference for the determination of vessels studied in the primates. Arteries of the encephalon base represent division branches of three vascular pedicules: the right and left internal carotid arteries and the basilar system. Vessels in the basilar system of the animal were called vertebral arteries; anterior spinal artery; anterior and posterior cerebelar arteries; pontine arteries; satellite cerebelar arteries; caudal and cranial cerebelar arteries. The basilar artery bifurcates into two posterior cerebral arteries (100%. The caudal area of the encephalon’s arterial circuit is thus constituted. Linking between the vertebro-basilar and the carotid segments is done by the posterior communicating artery, that caudally anastomizes (100% with the posterior cerebral artery. The internal carotid artery gives origin to the posterior communicating artery. The right and left internal carotid artery (intracranial portion compounds the carotid system. The following vessels were identified: middle cerebral artery; anterior cerebral artery; interhemispheric artery; olfactory arteries. Results report that Cebus paella presents an arterial pattern of relative morphological stabilityEstudaram-se as artérias da base do encéfalo do Cebus apella em 30 animais, vindos a óbito por morte natural no Zoológico de São Paulo e coletados durante 10 anos. O material recebeu injeção de látex corado, fixado em formol a 10%, e foi dissecado sob lupa. Encontramos dificuldade e denominar estes vasos. As terminologias anatômicas humana e veterinária e a recuperação da literatura nos serviram de base para

  6. Eucharistic Hospitality : Reconsidering the Terminology

    NARCIS (Netherlands)

    Casadei, Giulia; Wouda, Fokke

    2016-01-01

    Giulia Casadei MA and Fokke Wouda MA work on PhD projects about Eucharistic sharing in ecumenical relations; a pressing, yet controversial topic in Roman Catholic ecumenical engagement. As they both encounter questions concerning the terminology of this field, they decided on writing an article

  7. Intellectualization through Terminology Development | Khumalo ...

    African Journals Online (AJOL)

    The article will propose an improved model to cater for AnyTime Access, which is convenient for student needs between lec-tures, and improve the harvesting mechanism in the existing model. Keywords: Intellectualization, Terminology Development, Harvesting, Crowdsourcing, Consultation, Verification, Authentication, ...

  8. IBE Glossary of Curriculum Terminology

    Science.gov (United States)

    UNESCO International Bureau of Education, 2013

    2013-01-01

    The International Bureau of Education (IBE) has compiled a "Glossary of Curriculum Terminology" offering definitions for over 180 terms related to the curriculum. It is also intended to be a working reference tool for specialists, educators and practitioners, and therefore feedback and suggestions are invited to help us to continue to…

  9. INTERVIEW: Knowledge and Terminology Management at Crisplant

    DEFF Research Database (Denmark)

    Møller, Margrethe H.; Toft, Birthe

    2012-01-01

    for the past 20 years. Today, term bases are used not just for terminology-oriented term management. Recording other types of master data needed by all kinds of professionals in the enterprise is equally important. Within the past year, Crisplant has been acquired by the German BEUMER group, which means......Margrethe H. Møller interviews Lisbeth Kjeldgaard Almsten (translator/coauthor: Birthe Toft) “If you think that terminology work is simply a matter of buying terminology management software and getting started, you are in for trouble” At Crisplant, we have been doing terminology management...... that the terminological resources of the two enterprises are in the process of being integrated. The challenges presented by this process demonstrate the importance of adhering to terminological principles when recording terminology resources, while at the same time reminding us what an essential discipline terminology...

  10. Terminology access methods leveraging LDAP resources.

    Science.gov (United States)

    Solbrig, Harold R; Chute, Christopher G

    2004-01-01

    Health terminologies have become more complex, more massive, and more ubiquitous in the modern healthcare enterprise. Present technology makes the use of these terminologies by humans, unaided by machines, virtually impossible. However, system and message interoperability can be severely compromised if the software services deploying terminology content and interfaces are themselves non-standard. We review some characteristics for good terminology services and introduce an open-source, robust, widely deployed and widely available software resource to underpin terminology service implementations. The Lightweight Directory Access Protocol, or LDAP, is compared with alternative technologies. We describe a reference implementation of terminology services built around the HL7 Common Terminology Services using LDAP methods. We propose that LDAP is well suited as a common platform for federated, synchronized, and algorithmically distributed terminology content from multiple sources.

  11. Standard terminology relating to nuclear materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This terminology standard contains terms, definitions, descriptions of terms, nomenclature, and explanations of acronyms and symbols specifically associated with standards under the jurisdiction of Committee C26 on Nuclear Fuel Cycle. This terminology may also be applicable to documents not under the jurisdiction of Committee C26, in which case this terminology may be referenced in those documents.

  12. Legal terminology in African languages | Alberts | Lexikos

    African Journals Online (AJOL)

    This article deals with the project on legal terminology in the African languages. It focuses on terminology aspects relating to the coining of terms for the legal profession. Terminology development in South Africa has been hampered by a number of sociolinguistic factors. During recent years South Africa has seen ...

  13. Mediation in Different Areas of Chinese Legal Reality – Parametrisation of Selected Terminology

    Directory of Open Access Journals (Sweden)

    Grzybek Joanna

    2016-06-01

    Full Text Available The paper deals with terminological issues in legal translation. The author has researched the process of establishing equivalents for partially equivalent terminology, using the parametrical approach to legal translation. The research consists of the terminological analysis of the texts of mediation regulations formulated in Chinese and Polish. The objective was to establish translational equivalents in the case of significant differences between the legal systems of the above mentioned linguistic area. The research was financed from the research grant no. 2012/07/E/HS2/00678, titled: Parameterisation of legilinguistic translatology in the scope of civil law and civil procedure awarded by the National Science Centre of the Republic of Poland (Sonata Bis program.

  14. Terminology of the prostate and related structures.

    Science.gov (United States)

    Wendell-Smith, C

    2000-01-01

    The various studies of J.E. McNeal (1968ndash;1977) established with precision the different sites of predilection for prostatic carcinomas, benign prostatic hypertrophy (BPH), and inflammation, making the division of the prostate into right, left, and middle lobes and isthmus inadequate for their description. Unfortunately, his positional terms for the sites (peripheral, central, transition, and preprostatic) are not based on the usual parameters and cannot be directly related to those of other workers. Nevertheless, the International Federation of Associations of Anatomists' Federative Committee on Anatomical Terminology has made recommendations in Terminologia Anatomica, based on his findings but modified to take some account of those of Tisell and Salander (1975 Scand J Urol Nephrol 1975 9:185-191). The use of the term lobe is confined to the right and left lobes and the variable middle lobe. The term lobule is used for the subdivisions, which are named from the anatomical position. Thus each side has a superomedial, an anteromedial, an inferoposterior, and an inferolateral lobule. Also necessary to describe a site of predilection is a peri-urethral gland zone. In ultrasound diagnosis, the trapezoid area is important: its upper limit is the rectoperinealis, its anterior limit is the intermediate part of the urethra, its lower limit is the anoperinealis, and its posterior limit is the anorectal junction. Confusion at the bladder neck is resolved by recognizing that the position of the internal urethral orifice varies with functional state of the bladder: while it is filling the orifice lies above the base of the prostate; when voiding begins, the orifice descends to the base of the prostate; between the filling internal orifice and the emptying internal orifice is the bladder neck part of the urethra. Copyright 2000 Wiley-Liss, Inc.

  15. Terminology Management at the National Language Service

    Directory of Open Access Journals (Sweden)

    Mariëtta Alberts

    2011-10-01

    Full Text Available

    Abstract: Terminology is a strategic resource in a multilingual country. It is the medium through which knowledge and information is disseminated. lhrough the use of correct, standardised terminology, effective scientific and technical communication skills are developed. A brief overview is given of terminology development in South Africa, with special emphasis on the work of the Terminology Division of the National Language Service. Aspects of present terminology practice such as terminology management, the nature of terminology and terminography, and work-flow procedure in a multilingual terminology office receive attention. To present training activities, initiatives and needs attention is also given.

    Keywords: BILINGUAL, COMMUNICATION SKILLS, DISSEMINATION, DOCUMENTATION, DOMAIN, MULTILINGUAL, SOCIOLINGUISTICS, SOURCE LANGUAGE, STANDARDISATION, STANDARDISED TERMINOLOGY, SUBJECT FIELD, TARGET LANGUAGE, TECHNICAL DICTIONARIES, TECHNICAL LANGUAGE, TERMINOGRAPHER, TERMINOGRAPHY, TERMINOLOGIST, TERMINOLOGY, TERMINOLOGY DEVELOPMENT, TERMINOLOGY MANAGEMENT, TERMINOLOGY PRACTICE, TERMINOLOGY PRINCIPLES, TERMINOLOGY TRAINING

    Opsomming: Terminologiebestuur by die NasionaleTaaldiens. Tenninologieis'n strategiese bron in 'n meertalige land. Dit is die medium waardeur kennis en inligting veispreiword. Deur die gebruik van korrekte, gestandaardiseerde terrninologie kan eflektiewe wetenskaplikeen tegnologiese kommunikasievermoens ontwikkel word. 'n Kort oorsig word gegee van terminologieontwikkelingin Suid-Afrika, met spesiale klem op die werk van die Terminologieafdelingvan die Nasionale Taaldiens. Aspekte van die huidige terminologiepraktyk soas tenninologiebestuur,die aard van terminologie en terminografie en die werksvloeiprosedure in 'nmeertalige terminologiekantoor ontvang aandag. Aan huidige opleidingsaktiwiteite, -inisiatieween-behoeftes word ook aandag gegee.

    Sleutelwoorde: BRONTAAL, DISSEMINERING, DOELTAAL, DOKUMENTASIE

  16. Managing terminology assets in Electronic Health Records.

    Science.gov (United States)

    Abrams, Kelly; Schneider, Sue; Scichilone, Rita

    2009-01-01

    Electronic Health Record (EHR)systems rely on standard terminologies and classification systems that require both Information Technology (IT) and Information Management (IM) skills. Convergence of perspectives is necessary for effective terminology asset management including evaluation for use, maintenance and intersection with software applications. Multiple terminologies are necessary for patient care communication and data capture within EHRs and other information management tasks. Terminology asset management encompasses workflow and operational context as well as IT specifications and software application run time requirements. This paper identifies the tasks, skills and collaboration of IM and IT approaches for terminology asset management.

  17. The Open Terminology Services (OTS) project.

    Science.gov (United States)

    Solbrig, Harold R; Armbrust, Daniel C; Chute, Christopher G

    2003-01-01

    The Open Terminology Services (OTS) project provides a common, well-specified mechanism to access terminological content in a vendor and platform neutral fashion. The project includes a freely available API specification and an open source reference implementation. The API specification derives from the OMG Lexicon Query Services interface specification as a foundation and defines mechanisms for browsing, querying and import terminological content. The Java-based reference implementation uses the Lightweight Directory Access Protocol (LDAP) for a back end, and provides a mechanism to query and distribute heterogeneous terminological content using a common format. The project includes the CTS (Central Terminology Services) subset under HL7.

  18. Organizational commitment and work engagement – Theoretical conceptions and terminological problems

    Directory of Open Access Journals (Sweden)

    Mariola Łaguna

    2015-06-01

    Full Text Available Engagement in professional activities and positive attitudes towards an organization are of significant importance to functioning and health of employees. Studies analysing the phenomena of employees’ engagement and their relations with an organization undergo a dynamic development in both international and Polish research. Two theoretical conceptions: organizational commitment (by Meyer and Allen and work engagement (by Schaufeli and Bakker have become prominent in the field. They capture 2 similar, albeit distinct constructs. In English-language journals academics concentrate on theoretical and empirical analyses of similarities and differences between the 2 concepts, while in Polish publications scholars also have to deal with the issue of the original term translation. The problem lies mostly in Polish nomenclature of the dimensions proposed in both of these conceptions. Lack of common translations for different studies may cause confusion in this area of research. In the paper we present a review of Polish translations of terms used in the discussed conceptions. We also present a linguistic analysis of terms, both in English and in Polish. We provide solutions which could help to clarify terminology in Polish-language publications concerning organizational commitment and work engagement. This allows for further development of research in this field. Med Pr 2015;66(2:277–284

  19. Radon: a problem of terminology

    International Nuclear Information System (INIS)

    Pellegrini, D.; Demongeot, S.

    1995-01-01

    Here are detailed the difficulties to speak about the same thing if we don't use the same language. The example is the radon and what we want to tell about it; it is necessary to explain what words we are using and what mean we want to give them. Then, emanation and exhalation are given with their definitions. Also the terms as factor, flux and rate are redefined. It is a way to make scientific population sensitive to terminology

  20. Right/left symmetry of the intrahepatic distribution and terminology of the hepatic artery proper and the intrahepatic bile duct system: proposals to revise the Terminologia Anatomica.

    Science.gov (United States)

    Matusz, Petru

    2011-01-01

    Anatomical terminology is the foundation of medical terminology and it is important that doctors and scientists throughout the world use the same name for each structure. It is also important that the anatomical terms for a specific anatomical structure are presented in a logical order. To eliminate confusion, it is crucial that the same name is not attributed to two or more anatomical elements. However, the term artery of caudate lobe is used for two distinct anatomic elements with different origins (right/left branch of hepatic proper artery). Also, I draw attention to the incorrect positioning of right/left duct of caudate lobe in the description of terms homologated for the intrahepatic bile duct system. These proposals to amend the terminology in the liver anatomy are a necessary step in the evolution of the Terminologia Anatomica.

  1. Environmental/Biomedical Terminology Index

    International Nuclear Information System (INIS)

    Huffstetler, J.K.; Dailey, N.S.; Rickert, L.W.; Chilton, B.D.

    1976-12-01

    The Information Center Complex (ICC), a centrally administered group of information centers, provides information support to environmental and biomedical research groups and others within and outside Oak Ridge National Laboratory. In-house data base building and development of specialized document collections are important elements of the ongoing activities of these centers. ICC groups must be concerned with language which will adequately classify and insure retrievability of document records. Language control problems are compounded when the complexity of modern scientific problem solving demands an interdisciplinary approach. Although there are several word lists, indexes, and thesauri specific to various scientific disciplines usually grouped as Environmental Sciences, no single generally recognized authority can be used as a guide to the terminology of all environmental science. If biomedical terminology for the description of research on environmental effects is also needed, the problem becomes even more complex. The building of a word list which can be used as a general guide to the environmental/biomedical sciences has been a continuing activity of the Information Center Complex. This activity resulted in the publication of the Environmental Biomedical Terminology Index

  2. Environmental/Biomedical Terminology Index

    Energy Technology Data Exchange (ETDEWEB)

    Huffstetler, J.K.; Dailey, N.S.; Rickert, L.W.; Chilton, B.D.

    1976-12-01

    The Information Center Complex (ICC), a centrally administered group of information centers, provides information support to environmental and biomedical research groups and others within and outside Oak Ridge National Laboratory. In-house data base building and development of specialized document collections are important elements of the ongoing activities of these centers. ICC groups must be concerned with language which will adequately classify and insure retrievability of document records. Language control problems are compounded when the complexity of modern scientific problem solving demands an interdisciplinary approach. Although there are several word lists, indexes, and thesauri specific to various scientific disciplines usually grouped as Environmental Sciences, no single generally recognized authority can be used as a guide to the terminology of all environmental science. If biomedical terminology for the description of research on environmental effects is also needed, the problem becomes even more complex. The building of a word list which can be used as a general guide to the environmental/biomedical sciences has been a continuing activity of the Information Center Complex. This activity resulted in the publication of the Environmental Biomedical Terminology Index (EBTI).

  3. INTERVIEW: Knowledge and Terminology Management at Crisplant

    DEFF Research Database (Denmark)

    Møller, Margrethe H.; Toft, Birthe

    2012-01-01

    Margrethe H. Møller interviews Lisbeth Kjeldgaard Almsten (translator/coauthor: Birthe Toft) “If you think that terminology work is simply a matter of buying terminology management software and getting started, you are in for trouble” At Crisplant, we have been doing terminology management for th...... management really is, in enterprise practice as well as in education.......Margrethe H. Møller interviews Lisbeth Kjeldgaard Almsten (translator/coauthor: Birthe Toft) “If you think that terminology work is simply a matter of buying terminology management software and getting started, you are in for trouble” At Crisplant, we have been doing terminology management...... for the past 20 years. Today, term bases are used not just for terminology-oriented term management. Recording other types of master data needed by all kinds of professionals in the enterprise is equally important. Within the past year, Crisplant has been acquired by the German BEUMER group, which means...

  4. Recommended Standardized Terminology of the Anterior Female Pelvis Based on a Structured Medical Literature Review.

    Science.gov (United States)

    Jeppson, Peter C; Balgobin, Sunil; Washington, Blair B; Hill, Audra Jolyn; Lewicky-Gaupp, Christina; Wheeler, Thomas; Ridgeway, Beri; Mazloomdoost, Donna; Balk, Ethan M; Corton, Marlene M; Delancey, John

    2018-04-06

    To create recommended standardized terminology to describe anatomic structures of the anterior female pelvis based on a structured review of published literature and selected text books. We searched MEDLINE from its inception until May 2, 2016 using 11 MeSH terms to identify studies reporting on anterior female pelvic anatomy; any study type published in English was accepted. Nine textbooks were also included. We screened 12,264 abstracts, identifying 200 eligible studies along with 13 textbook chapters from which we extracted all pertinent anatomic terms. Sixty-seven unique structures in the anterior female pelvis were identified. Fifty-nine of these have been previously recognized with accepted terms in Terminologia Anatomica, the international standard on anatomical terminology. We also identified and propose the adoption of four anatomic regional terms (lateral vaginal wall, pelvic side wall, pelvic bones, and anterior compartment), and two structural terms not included in Terminologia Anatomica (vaginal sulcus and levator hiatus). In addition, we identified two controversial terms (pubourethral ligament and Grafenberg spot) that require additional research and consensus from the greater medical and scientific community prior to adoption or rejection of these terms. We propose standardized terminology that should be used when discussing anatomic structures in the anterior female pelvis to help improve communication between researchers, clinicians, and surgeons. Copyright © 2018. Published by Elsevier Inc.

  5. Functional Median Polish

    KAUST Repository

    Sun, Ying

    2012-08-03

    This article proposes functional median polish, an extension of univariate median polish, for one-way and two-way functional analysis of variance (ANOVA). The functional median polish estimates the functional grand effect and functional main factor effects based on functional medians in an additive functional ANOVA model assuming no interaction among factors. A functional rank test is used to assess whether the functional main factor effects are significant. The robustness of the functional median polish is demonstrated by comparing its performance with the traditional functional ANOVA fitted by means under different outlier models in simulation studies. The functional median polish is illustrated on various applications in climate science, including one-way and two-way ANOVA when functional data are either curves or images. Specifically, Canadian temperature data, U. S. precipitation observations and outputs of global and regional climate models are considered, which can facilitate the research on the close link between local climate and the occurrence or severity of some diseases and other threats to human health. © 2012 International Biometric Society.

  6. Information on the changes in the revised anatomical nomenclature of the lower limb veins.

    Science.gov (United States)

    Kachlik, David; Pechacek, Vaclav; Musil, Vladimir; Baca, Vaclav

    2010-03-01

    Two consensus documents have appeared which revised the anatomical nomenclature of the venous system of the lower extremity. They changed and substantially extended the last valid version of the Latin anatomical nomenclature, Terminologia Anatomica, published by the Federative Committee on Anatomical Terminology, with approval of the International Federation of Associations of Anatomists, in 1998. The clinicians felt the need to adjust the terminology in order to better serve their purposes and to serve as a relevant theoretical base for correct diagnostic and appropriate treatment. First a consensus was made to expand and complete the nomenclature of the lower limb venous system during the 14th World Congress of the International Union of Phlebology in 2001. Another consensus was made again three years later, during 21st World Congress of the International Union of Angiology, under the auspices of Federative Committee on Anatomical Terminology and International Federation of Associations of Anatomists. The articles were compiled with the emphasis on the Latin terminology. Review of the original articles concerning the arrangement, variability and different nomenclature was performed thoroughly. The both documents comprise 89 terms of the veins of the lower extremity in both Latin and English. The clinicians, anatomists, and university teachers should follow the new extended anatomical nomenclature of the lower limb veins. The precise anatomical terminology can serve for diagnostic, treatment, and scientific purposes not only in the anatomy and angiology.

  7. Terminology of psychogenic nonepileptic seizures.

    Science.gov (United States)

    Brigo, Francesco; Igwe, Stanley C; Ausserer, Harald; Nardone, Raffaele; Tezzon, Frediano; Bongiovanni, Luigi Giuseppe; Tinazzi, Michele; Trinka, Eugen

    2015-03-01

    Several different terms have been used to describe "psychogenic nonepileptic seizures" (PNES) in the literature. In this study, we evaluated the most common English terms used to describe PNES on Google and in PubMed using multiple search terms (https://www.google.com and http://www.ncbi.nlm.nih.gov/pubmed). The information prevalence of the five terms most frequently used to refer to PNES in PubMed were: psychogenic non(-)epileptic seizure(s), followed by pseudo(-)seizure(s), non(-)epileptic seizure(s), psychogenic seizure(s), and non(-)epileptic event(s). The five most frequently adopted terms to describe PNES in Google were: psychogenic non(-)epileptic seizure(s), followed by non(-)epileptic event(s), psychogenic attack(s), non(-)epileptic attack(s), and psychogenic non(-)epileptic attack(s). The broad spectrum of synonyms used to refer to PNES in the medical literature reflects a lack of internationally accepted, uniform terminology for PNES. In addition to "seizure(s)," lay people use the word "attack(s)" to describe PNES. Although considered obsolete, some terms, e.g., pseudoseizure(s), are still used in the recent medical literature. Adopting a uniform terminology to describe PNES could facilitate communication between epileptologists, physicians without specific expertise in epilepsy, and patients. Wiley Periodicals, Inc. © 2015 International League Against Epilepsy.

  8. INIS, CEA and nuclear terminology

    International Nuclear Information System (INIS)

    Surmont, J.; Brulet, C.; Constant, A.; Guille, N.; Le Blanc, A.; Mouffron, O.; Anguise, P.; Jouve, J.J.

    2007-01-01

    This poster, prepared for the fifth edition of the meetings of scientific and technical information professionals (RPIST, Nancy (France)), presents, first, the INIS information system, its content and coverage, the French participation to this system and the role of the CEA-Saclay as France's official representative for this system. Then it presents the INIS thesaurus with its different levels as a terminological tool for the indexing of documents and for searching documents inside the database. Finally, the very first electronic version of the multilingual thesaurus is introduced. Several national INIS centres, including the CEA-Saclay, have contributed to the translation of lists of new terms and of forbidden terms (synonyms). (J.S.)

  9. ON THE TERMINOLOGY OF SPONDYLOARTHRITIS

    Directory of Open Access Journals (Sweden)

    Sh. F. Erdes

    2015-01-01

    Full Text Available By the end of the first decade of the 21st century, spondyloarthritis studies have accumulated a certain number of terms that are obsolete, but used by physicians in their everyday speech, on the one hand, and a great variety of different definitions, on the other hand. In January 2014, the first organizational meeting of the Expert Group on Spondyloarthritis, Association of Rheumatologists of Russia, decided that its primary task should be to order the terminology used in this area. The authors primarily collected the terms, which had been already used in medical vocabulary, and then divided them into two categories: obsolete definitions and terms to be finalized and unified. This publication gives guidelines for using the medical terms relevant to spondyloarthritis and separately discusses how to correctly write the term sacroiliitis.

  10. Managing Carious Lesions: Consensus Recommendations on Terminology

    NARCIS (Netherlands)

    Innes, N.P.; Frencken, J.E.; Bjorndal, L.; Maltz, M.; Manton, D.J.; Ricketts, D.; Van Landuyt, K.; Banerjee, A.; Campus, G.; Domejean, S.; Fontana, M.; Leal, S.; Lo, E.; Machiulskiene, V.; Schulte, A.; Splieth, C.; Zandona, A.; Schwendicke, F.

    2016-01-01

    Variation in the terminology used to describe clinical management of carious lesions has contributed to a lack of clarity in the scientific literature and beyond. In this article, the International Caries Consensus Collaboration presents 1) issues around terminology, a scoping review of current

  11. Management and Internal Standardization of Chemistry Terminology ...

    African Journals Online (AJOL)

    This article describes the terminological processing of a technical source text prior to translation, which formed part of the compilation of a Quadrilingual Explanatory Dictionary of Chemistry. It reports on the model of terminology management that was utilized and explores strategies for the internal standardization of terms in ...

  12. Terminological Definition in Vocabulary Building Process

    OpenAIRE

    Medvedeva Elena S

    2015-01-01

    The article discusses the possibilities of using a terminological definition as a short text in the language for specific purposes teaching/learning. Representing an abundant supply of specialized vocabulary and general scientific speech patterns, a terminological definition should be taken into account as a full value language resource.

  13. The development of a dental diagnostic terminology

    NARCIS (Netherlands)

    Kalenderian, E.; Ramoni, R.L.; Schoonheim-Klein, M.E.; Stark, P.C.; Kimmes, N.S.; Zeller, G.G.; Willis, G.P.; Walji, M.F.; White, J.M.

    2011-01-01

    There is no commonly accepted standardized terminology for oral diagnoses. The purpose of this article is to report the development of a standardized dental diagnostic terminology by a work group of dental faculty members. The work group developed guiding principles for decision making and adhered

  14. Overcoming barriers to evaluation of terminological systems

    NARCIS (Netherlands)

    Cornet, Ronald; de Keizer, Nicolette F.; Arts, Daniëlle G. T.

    2004-01-01

    Evaluation of terminological systems has been demonstrated to be a complicated task. This is due to the broad range of terminological systems, their application, and the clinical contexts in which they can be applied. We propose an evaluation framework that explicitly distinguishes an

  15. Fascial eponyms may help elucidate terminological and nomenclatural development.

    Science.gov (United States)

    Adstrum, Sue

    2015-07-01

    It has been reported that at least 700 anatomical eponyms were in existence at the end of the 19th century, yet the number of eponyms expressly relating to fasciae is unknown, and these anatomical expressions have yet to be described as a group. This study accordingly aimed to assemble a comprehensive-as-possible list of these terms, to investigate their customary usage, and to consider whether their existence might usefully shed light on contemporary fascia-relating terminological development. A search for fascia-relating eponyms incorporated within a range of English language anatomical and medical publications during the past 400 years resulted in the discovery of 44 eponyms that explicitly refer to aspects of fascia. This article outlines and discusses the origin, meaning, and use of these terms, and concludes that an understanding of the history of fascial eponyms may be of value when addressing contemporary concerns with the language used to describe fascia. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Polish Semantic Parser

    Directory of Open Access Journals (Sweden)

    Agnieszka Grudzinska

    2000-01-01

    Full Text Available Amount of information transferred by computers grows very rapidly thus outgrowing the average man's capability of reception. It implies computer programs increase in the demand for which would be able to perform an introductory classitication or even selection of information directed to a particular receiver. Due to the complexity of the problem, we restricted it to understanding short newspaper notes. Among many conceptions formulated so far, the conceptual dependency worked out by Roger Schank has been chosen. It is a formal language of description of the semantics of pronouncement integrated with a text understanding algorithm. Substantial part of each text transformation system is a semantic parser of the Polish language. It is a module, which as the first and the only one has an access to the text in the Polish language. lt plays the role of an element, which finds relations between words of the Polish language and the formal registration. It translates sentences written in the language used by people into the language theory. The presented structure of knowledge units and the shape of understanding process algorithms are universal by virtue of the theory. On the other hand the defined knowledge units and the rules used in the algorithms ure only examples because they are constructed in order to understand short newspaper notes.

  17. Geoscience terminology for data interchange

    Science.gov (United States)

    Richard, Stephen

    2013-04-01

    Workgroups formed by the Commission for the Management and Application of Geoscience Information (CGI), a Commission of the International Union of Geological Sciences (IUGS) have been developing vocabulary resources to promote geoscience information exchange. The Multilingual Thesaurus Working Group (MLT) was formed in 2003 to continue work of the Multhes working group of the 1990s. The Concept Definition Task Group was formed by the CGI Interoperability Working Group in 2007 to develop concept vocabularies for populating GeoSciML interchange documents. The CGI council has determined that it will be more efficient and effective to merge the efforts of these groups and has formed a new Geoscience Terminology Working Group (GTWG, http://www.cgi-iugs.org/tech_collaboration/geoscience_terminology_working_group.html). Each GTWG member will be expected to shepherd one or more vocabularies. There are currently 31 vocabularies in the CGI portfolio, developed for GeoSciML interchange documents (e.g. see http://resource.geosciml.org/ 201202/). Vocabulary development in both groups has been conducted first by gathering candidate terms in Excel spreadsheets because these are easy for text editing and review. When the vocabulary is mature, it is migrated into SKOS, an RDF application for encoding concepts with identifiers, definitions, source information, standard thesaurus type relationships, and language-localized labels. Currently there are 30 vocabularies still required for GeoSciML v3, and 38 proposed vocabularies for use with EarthResourceML (https://www.seegrid.csiro.au/wiki/CGIModel/EarthResourceML). In addition, a project to develop a lithogenetic map unit vocabulary to use for regional geologic map integration using OGC web map services is underway. Considerable work remains to be done to integrate multilingual geoscience terms developed by the MLT Working Group with existing CGI vocabularies to provide multilingual support, and to make the thesaurus compiled by the

  18. TERMINOLOGY MANAGEMENT FRAMEWORK DEVIATIONS IN PROJECTS

    Directory of Open Access Journals (Sweden)

    Олена Борисівна ДАНЧЕНКО

    2015-05-01

    Full Text Available The article reviews new approaches to managing projects deviations (risks, changes, problems. By offering integrated control these parameters of the project and by analogy with medical terminological systems building a new system for managing terminological variations in the projects. With an improved method of triads system definitions are analyzed medical terms that make up terminological basis. Using the method of analogy proposed new definitions for managing deviations in projects. By using triad integrity built a new system triad in project management, which will subsequently also analogous to develop a new methodology of deviations in projects.

  19. Current procedural terminology; a primer.

    Science.gov (United States)

    Hirsch, Joshua A; Leslie-Mazwi, Thabele M; Nicola, Gregory N; Barr, Robert M; Bello, Jacqueline A; Donovan, William D; Tu, Raymond; Alson, Mark D; Manchikanti, Laxmaiah

    2015-04-01

    In 1966, The American Medical Association (AMA) working with multiple major medical specialty societies developed an iterative coding system for describing medical procedures and services using uniform language, the Current Procedural Terminology (CPT) system. The current code set, CPT IV, forms the basis of reporting most of the services performed by healthcare providers, physicians and non-physicians as well as facilities allowing effective, reliable communication among physician and other providers, third parties and patients. This coding system and its maintenance has evolved significantly since its inception, and now goes well beyond its readily perceived role in reimbursement. Additional roles include administrative management, tracking new and investigational procedures, and evolving aspects of 'pay for performance'. The system also allows for local, regional and national utilization comparisons for medical education and research. Neurointerventional specialists use CPT category I codes regularly--for example, 36,215 for first-order cerebrovascular angiography, 36,216 for second-order vessels, and 37,184 for acute stroke treatment by mechanical means. Additionally, physicians add relevant modifiers to the CPT codes, such as '-26' to indicate 'professional charge only,' or '-59' to indicate a distinct procedural service performed on the same day. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  20. Historical perspective on developmental concepts and terminology.

    Science.gov (United States)

    Opitz, John M; Neri, Giovanni

    2013-11-01

    In their ontogeny and phylogeny all living beings are historical entities. The revolution in biology of the 18th and 19th centuries that did away with the scala naturae according to which we humans, the acme of creation, "made a little lower than the angels," also led to the gradual realization that a humble one-celled protist ("protoctist"), such as Entamoeba histolytica of ill repute [Margulis and Chapman, ] has the same 4-billion-year phylogeny as that of Homo sapiens, vivid testimony to common ancestry and the relatedness of all living beings on earth. The group of medical geneticists who assembled at the NIH, Bethesda, MD this January to address terms pertaining to human ontogeny, did so in the long tradition of Sydenham, Linnaeus, Meckel, Geoffroy St-Hilaire père et fils, Wilhelm His and so many others before who had over the previous two centuries wrestled as earnestly as they could with concepts of "classification" and nomenclature of developmental anomalies. The prior massive need for classification per se in medical morphology has diminished over the years in favor of ever more sophisticated understanding of pathogenesis and cause through experimental biology and genetics; however, in the winter of 2013 it was still found prudent to respect terminological precedent on general terms while recognizing recent advances in developmental pathology requiring clarification and definition of special terms. Efforts along similar lines instigated by the German Society of Anatomists at their first meeting in Leipzig in 1887 culminated, after intense years of work by hundreds of experts and consultants under the goad of Wilhelm His, in the Basel Nomina Anatomica [BNA, His (1895)]. His, himself, stated prefatorily that the BNA had no legislative weight, only an evanescent consensus of many to be amended in the future as needed and indicated. Without hubris, no one before or after will do the same. The more substantial the consensus the more permanent the structure

  1. Conceptual metaphors in computer networking terminology ...

    African Journals Online (AJOL)

    Lakoff & Johnson, 1980) is used as a basic framework for analysing and explaining the occurrence of metaphor in the terminology used by computer networking professionals in the information technology (IT) industry. An analysis of linguistic ...

  2. National Drug File - Reference Terminology API

    Data.gov (United States)

    U.S. Department of Health & Human Services — The National Drug File - Reference Terminology (NDF-RT) is produced by the U.S. Department of Veterans Affairs, Veterans Health Administration (VHA). NDF-RT is an...

  3. Terminology management at the national language service | Alberts ...

    African Journals Online (AJOL)

    Through the use of correct, standardised terminology, effective scientific and technical communication skills are developed. A brief overview is given of terminology development in South Africa, with special emphasis on the work of the Terminology Division of the National Language Service. Aspects of present terminology ...

  4. [Lysenkoism in Polish botany].

    Science.gov (United States)

    Köhler, Piotr

    2008-01-01

    Lysenkoism in Poland was never an autonomous phenomenon. The whole array of reasons for which it appeared in Polish science would require a separate study--here it only needs to be pointed out that the major reasons included terror on the part of the security service, lawlessness, the ubiquitous atmosphere of intimidation and terror, censorship, the diminishing sphere of civil liberties, political show trials, propaganda and denunciations. An important role in facilitating the introduction of Lysenkoism was played also by the reorganization of science after World War Two, the isolation of Polish science from science in the West, as well as the damage it had suffered during the war. At first, Lysenkoism was promoted in Poland by a small group of enthusiastic and uncritical proponents. A overview of the events connected with the ten years of Lysenkoism in Poland (end of 1948--beginning of 1958) shows a two-tier picture of how the 'idea' was propagated. The first tier consisted in the activities of the Association of Marxist Naturalists [Koło Przyrodników-Marksistów], which it engaged in since the end of 1948. The Association was later transformed into a Union of Marxist Naturalists, and this in turn merged, in 1952, with the Copernican Society of Polish Naturalists [Polskie Towarzystwo Przyrodników im. Kopernika]. It was that society which promoted Lysenkoism longest, until the end of 1956. The propaganda and training activities of the circle and the society prepared ground for analogous activities of the newly formed Polish Academy of Science (PAN), which--since its very establishment in 1952--engaged in promoting Lysenkoism through its Second Division. These activities were aimed at naturalists, initially at those who were prominent scientists (eg. the conference at Kuźnice, 1950/1951), and then at those who were only starting their academic career (including national courses in new biology at Dziwnów, 1952, or Kortowo, 1953 and 1955). The end to promoting

  5. Calcaneus, calcaneal tendon and retrocalcaneal bursa. Historical overview and plea for an accurate terminology.

    Science.gov (United States)

    Kachlik, D; Musil, V; Vasko, S; Klaue, K; Stingl, J; Baca, V

    2010-01-01

    Diseases and injuries of several specific structures in the heel region have been an enduring focus of medicine: The anatomical terminology of many of these structures has not been established until recently. The aim of the study was a historical analysis of the advances of anatomical terminology of three selected morphological units in the heel region--the Achilles tendon, calcaneus and retrocalcaneal bursa. It starts with a critical evaluation of the mythological eposes, the Illiad and Odyssey, describing the exploits of heroes in the Trojan war, followed by a review of relevant terms used for the designation of selected heel structures in the Middle Ages as well as in the 18" and 19" centuries. Principal versions of Latin anatomical terms used for the denotation of the mentioned structures are discussed. Recently applicable Latin terms and their recommended English synonyms, according to the latest version of Terminologia Anatomica (1998) are summed up. It surveys examples of "not very appropriate" terms, which are frequently used in clinical literature. The authors consider the use of official anatomical terms (both Latin and English) as an important step for the improvement of the clinical expressions and formulations.

  6. Constructing a biodiversity terminological inventory.

    Directory of Open Access Journals (Sweden)

    Nhung T H Nguyen

    Full Text Available The increasing growth of literature in biodiversity presents challenges to users who need to discover pertinent information in an efficient and timely manner. In response, text mining techniques offer solutions by facilitating the automated discovery of knowledge from large textual data. An important step in text mining is the recognition of concepts via their linguistic realisation, i.e., terms. However, a given concept may be referred to in text using various synonyms or term variants, making search systems likely to overlook documents mentioning less known variants, which are albeit relevant to a query term. Domain-specific terminological resources, which include term variants, synonyms and related terms, are thus important in supporting semantic search over large textual archives. This article describes the use of text mining methods for the automatic construction of a large-scale biodiversity term inventory. The inventory consists of names of species, amongst which naming variations are prevalent. We apply a number of distributional semantic techniques on all of the titles in the Biodiversity Heritage Library, to compute semantic similarity between species names and support the automated construction of the resource. With the construction of our biodiversity term inventory, we demonstrate that distributional semantic models are able to identify semantically similar names that are not yet recorded in existing taxonomies. Such methods can thus be used to update existing taxonomies semi-automatically by deriving semantically related taxonomic names from a text corpus and allowing expert curators to validate them. We also evaluate our inventory as a means to improve search by facilitating automatic query expansion. Specifically, we developed a visual search interface that suggests semantically related species names, which are available in our inventory but not always in other repositories, to incorporate into the search query. An assessment of

  7. Critical analysis and systematization of rat pancreatectomy terminology.

    Science.gov (United States)

    Eulálio, José Marcus Raso; Bon-Habib, Assad Charbel Chequer; Soares, Daiane de Oliveira; Corrêa, Paulo Guilherme Antunes; Pineschi, Giovana Penna Firme; Diniz, Victor Senna; Manso, José Eduardo Ferreira; Schanaider, Alberto

    2016-10-01

    To critically analyze and standardize the rat pancreatectomy nomenclature variants. It was performed a review of indexed manuscripts in PUBMED from 01/01/1945 to 31/12/2015 with the combined keywords "rat pancreatectomy" and "rat pancreas resection". The following parameters was considered: A. Frequency of publications; B. Purpose of the pancreatectomy in each article; C. Bibliographic references; D. Nomenclature of techniques according to the pancreatic parenchyma resection percentage. Among the 468, the main objectives were to surgically induce diabetes and to study the genes regulations and expressions. Five rat pancreatectomy technique references received 15 or more citations. Twenty different terminologies were identified for the pancreas resection: according to the resected parenchyma percentage (30 to 95%); to the procedure type (total, subtotal and partial); or based on the selected anatomical region (distal, longitudinal and segmental). A nomenclature systematization was gathered by cross-checking information between the main surgical techniques, the anatomic parameters descriptions and the resected parenchyma percentages. The subtotal pancreatectomy nomenclature for parenchymal resection between 80 and 95% establishes a surgical parameter that also defines the total and partial pancreatectomy limits and standardizes these surgical procedures in rats.

  8. Anatomical description of the sinus in the alpaca (Vicugna pacos)

    OpenAIRE

    Zárate L., Rosse; Laboratorio de Anatomía Animal y Fauna Silvestre, Facultad de Medicina Veterinaria, Universidad Nacional Mayor de San Marcos, Lima; Navarrete Z., Miluska; Laboratorio de Anatomía Animal y Fauna Silvestre, Facultad de Medicina Veterinaria, Universidad Nacional Mayor de San Marcos, Lima; Sato S., Alberto; Laboratorio de Anatomía Animal y Fauna Silvestre, Facultad de Medicina Veterinaria, Universidad Nacional Mayor de San Marcos, Lima; Díaz C., Diego; Laboratorio de Farmacología y Toxicología, Facultad de Medicina Veterinaria, Universidad Nacional Mayor de San Marcos, Lima; Huanca L., Wilfredo; Laboratorio de Reproducción Animal, Facultad de Medicina Veterinaria, Universidad Nacional Mayor de San Marcos, Lima

    2015-01-01

    The objective of the present study was to describe the macroscopic anatomy of the sinus in the alpaca. Ten skulls of adult alpacas were prepared by the maceration technique, and the description through longitudinal cuts was done using terminology recommended by the Nomina Anatomica Veterinaria. In addition, X-rays with contrast medium were taken to four adult alpacas to determine the relationships of sinus with other anatomical structures. Results showed that the frontal and maxillary sinus w...

  9. Subjective Quality of Life of Polish, Polish-Immigrant, and Polish-American Elderly.

    Science.gov (United States)

    Berdes, Celia; Zych, Adam A.

    2000-01-01

    Compares subjective quality of life of elderly Poles living in Poland, and Polish immigrants and Polish-American ethnics living in Chicago as part of a secondary data analysis of a study initially conducted in Poland. Conclusions lend support to the idea that U.S.-born elderly people and elderly immigrants to the United States have a significantly…

  10. Information model for learning nursing terminology.

    Science.gov (United States)

    Nytun, Jan Pettersen; Fossum, Mariann

    2014-01-01

    Standardized terminologies are introduced in healthcare with the intention of improving information quality, which is important for enhancing the quality of healthcare itself. The International Classification for Nursing Practice (ICNP®) is a unified language system that presents an ontology for nursing terminology; it is meant for documentation of nursing diagnoses, nursing interventions and patient outcomes. This paper presents an information model and an application for teaching nursing students how to use ICNP to assist in the planning of nursing care. The model is an integration of ICNP and our catalog ontology, patient journal ontology, and ontology defining task sets. The application for learning nursing terminology offers descriptions of patient situations and then prompts the student to supply nursing statements for diagnoses, goals and interventions. The nursing statements may be selected from catalogues containing premade solutions based on ICNP, or they may be constructed directly by selecting terms from ICNP.

  11. Standard Terminology Relating to Wear and Erosion

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 The terms and their definitions given herein represent terminology relating to wear and erosion of solid bodies due to mechanical interactions such as occur with cavitation, impingement by liquid jets or drops or by solid particles, or relative motion against contacting solid surfaces or fluids. This scope interfaces with but generally excludes those processes where material loss is wholly or principally due to chemical action and other related technical fields as, for instance, lubrication. 1.2 This terminology is not exhaustive; the absence of any particular term from this collection does not necessarily imply that its use within this scope is discouraged. However, the terms given herein are the recommended terms for the concepts they represent unless otherwise noted. 1.3 Certain general terms and definitions may be restricted and interpreted, if necessary, to make them particularly applicable to the scope as defined herein. 1.4 The purpose of this terminology is to encourage uniformity and accuracy ...

  12. Evaluating standard terminologies for encoding allergy information.

    Science.gov (United States)

    Goss, Foster R; Zhou, Li; Plasek, Joseph M; Broverman, Carol; Robinson, George; Middleton, Blackford; Rocha, Roberto A

    2013-01-01

    Allergy documentation and exchange are vital to ensuring patient safety. This study aims to analyze and compare various existing standard terminologies for representing allergy information. Five terminologies were identified, including the Systemized Nomenclature of Medical Clinical Terms (SNOMED CT), National Drug File-Reference Terminology (NDF-RT), Medication Dictionary for Regulatory Activities (MedDRA), Unique Ingredient Identifier (UNII), and RxNorm. A qualitative analysis was conducted to compare desirable characteristics of each terminology, including content coverage, concept orientation, formal definitions, multiple granularities, vocabulary structure, subset capability, and maintainability. A quantitative analysis was also performed to compare the content coverage of each terminology for (1) common food, drug, and environmental allergens and (2) descriptive concepts for common drug allergies, adverse reactions (AR), and no known allergies. Our qualitative results show that SNOMED CT fulfilled the greatest number of desirable characteristics, followed by NDF-RT, RxNorm, UNII, and MedDRA. Our quantitative results demonstrate that RxNorm had the highest concept coverage for representing drug allergens, followed by UNII, SNOMED CT, NDF-RT, and MedDRA. For food and environmental allergens, UNII demonstrated the highest concept coverage, followed by SNOMED CT. For representing descriptive allergy concepts and adverse reactions, SNOMED CT and NDF-RT showed the highest coverage. Only SNOMED CT was capable of representing unique concepts for encoding no known allergies. The proper terminology for encoding a patient's allergy is complex, as multiple elements need to be captured to form a fully structured clinical finding. Our results suggest that while gaps still exist, a combination of SNOMED CT and RxNorm can satisfy most criteria for encoding common allergies and provide sufficient content coverage.

  13. Calibration of personal dosimeters: Quantities and terminology

    International Nuclear Information System (INIS)

    Aleinikov, V.E.

    1999-01-01

    The numerical results obtained in the interpretation of individual monitoring of external radiation depend not only on the accurate calibration of the radiation measurement instruments involved, but also on the definition of the quantities in term of which these instruments are calibrated The absence of uniformity in terminology not only makes it difficult to understand properly the scientific and technical literature but can also lead to incorrect interpretation of particular concepts and recommendations. In this paper, brief consideration is given to definition of radiation quantities and terminology used in calibration procedures. (author)

  14. Standards of the Polish Ultrasound Society - update. Sonomammography examination.

    Science.gov (United States)

    Jakubowski, Wiesław; Dobruch-Sobczak, Katarzyna; Migda, Bartosz

    2012-09-01

    The use of BIRADS classification has been recommended in sonomammography examinations in Poland since the year 2010. It was developed by the Polish Ultrasound Society and published in Ultrasound Examinations Standards of the Polish Ultrasound Society. Standards, based on BIRADS-usg classification, introduced uniformity in breast ultrasound examination descriptions and in the terminology of pathological lesions in breasts. BIRADS-usg classification takes into account breast morphological structure elements and pathological focal lesions in them. It enables the distinction between benign lesions and lesions suspected of being malignant. It contains information on the malignancy risk of focal lesions and proposals of diagnostic-therapeutic algorithms (including biopsy) in relation to lesions of different character. The Polish Ultrasound Society recommends performing prophylactic sonomammography examinations every 12 months in women over the age of 30 because of the increasing breast cancer morbidity in women from all age groups. In this article a spectrum of focal changes in breasts are presented within the relevant BIRADS-usg classification categories. The features of ultrasound morphology, enabling them to be classified to particular categories of BIRADS-usg classification are discussed. Management algorithms which may help clinicians to diagnose breast cancer and to treat it are proposed. Elements of medical history, physical examination, recommended techniques of sonomammography examination performance, technical parameters of ultrasound machine and examination description standards are presented. This article was prepared based on the Ultrasound Examination Standards of the Polish Ultrasound Society which was published in 2011 and updated. It contains numerous pictures visualizing BIRADS-usg classification.

  15. Standards of the Polish Ultrasound Society – update. Sonomammography examination

    Science.gov (United States)

    Jakubowski, Wiesław; Migda, Bartosz

    2012-01-01

    The use of BIRADS classification has been recommended in sonomammography examinations in Poland since the year 2010. It was developed by the Polish Ultrasound Society and published in Ultrasound Examinations Standards of the Polish Ultrasound Society. Standards, based on BIRADS-usg classification, introduced uniformity in breast ultrasound examination descriptions and in the terminology of pathological lesions in breasts. BIRADS-usg classification takes into account breast morphological structure elements and pathological focal lesions in them. It enables the distinction between benign lesions and lesions suspected of being malignant. It contains information on the malignancy risk of focal lesions and proposals of diagnostic-therapeutic algorithms (including biopsy) in relation to lesions of different character. The Polish Ultrasound Society recommends performing prophylactic sonomammography examinations every 12 months in women over the age of 30 because of the increasing breast cancer morbidity in women from all age groups. In this article a spectrum of focal changes in breasts are presented within the relevant BIRADS-usg classification categories. The features of ultrasound morphology, enabling them to be classified to particular categories of BIRADS-usg classification are discussed. Management algorithms which may help clinicians to diagnose breast cancer and to treat it are proposed. Elements of medical history, physical examination, recommended techniques of sonomammography examination performance, technical parameters of ultrasound machine and examination description standards are presented. This article was prepared based on the Ultrasound Examination Standards of the Polish Ultrasound Society which was published in 2011 and updated. It contains numerous pictures visualizing BIRADS-usg classification. PMID:26673579

  16. Tooth polishing: The current status

    Directory of Open Access Journals (Sweden)

    Madhuri Alankar Sawai

    2015-01-01

    Full Text Available Healthy teeth and gums make a person feel confident and fit. As people go about their daily routines and with different eating and drinking habits, the tooth enamel turns yellowish or gets stained. Polishing traditionally has been associated with the prophylaxis procedure in most dental practices, which patients know and expect. However, with overzealous use of polishing procedure, there is wearing of the superficial tooth structure. This would lead to more accumulation of local deposits. Also, it takes a long time for the formation of the fluoride-rich layer of the tooth again. Hence, now-a-days, polishing is not advised as a part of routine oral prophylaxis procedure but is done selectively based on the patients′ need. The article here, gives an insight on the different aspects of the polishing process along with the different methods and agents used for the same.

  17. Lysenko affair and Polish botany.

    Science.gov (United States)

    Köhler, Piotr

    2011-01-01

    This article describes the slight impact of Lysenkoism upon Polish botany. I begin with an account of the development of plant genetics in Poland, as well as the attitude of scientists and the Polish intelligentsia toward Marxist philosophy prior to the World War II. Next I provide a short history of the introduction and demise of Lysenkoism in Polish science, with a focus on events in botany, in context with key events in Polish science from 1939 to 1958. The article outlines the little effects of Lysenkoism upon botanists and their research, as well as how botanists for the most part rejected what was often termed the "new biology." My paper shows that though Lysenko's theories received political support, and were actively promoted by a small circle of scientists and Communist party activists, they were never accepted by most botanists. Once the political climate in Poland altered after the events of 1956, Lysenko's theories were immediately abandoned.

  18. EAU standardised medical terminology for urologic imaging: a taxonomic approach.

    Science.gov (United States)

    Loch, Tillmann; Carey, Brendan; Walz, Jochen; Fulgham, Pat Fox

    2015-05-01

    The terminology and abbreviations used in urologic imaging have generally been adopted on an ad hoc basis by different speciality groups; however, there is a need for shared nomenclature to facilitate clinical communication and collaborative research. This work reviews the current nomenclature for urologic imaging used in clinical practice and proposes a taxonomy and terminology for urologic imaging studies. A list of terms used in urologic imaging were compiled from guidelines published by the European Association of Urology and the American Urological Association and from the American College of Radiology Appropriateness Criteria. Terms searched were grouped into broad categories based on technology, and imaging terms were further stratified based on the anatomic extent, contrast or phases, technique or modifiers, and combinations or fusions. Terms that had a high degree of utilisation were classified as accepted. We propose a new taxonomy to define a more useful and acceptable nomenclature model acceptable to all health professionals involved in urology. The major advantage of a taxonomic approach to the classification of urologic imaging studies is that it provides a flexible framework for classifying the modifications of current imaging modalities and allows the incorporation of new imaging modalities. The adoption of this hierarchical classification model ranging from the most general to the most detailed descriptions should facilitate hierarchical searches of the medical literature using both general and specific terms. This work is limited in its scope, as it is not currently all-inclusive. This will hopefully be addressed by future modification as others embrace the concept and work towards uniformity in nomenclature. This paper provides a noncomprehensive list of the most widely used terms across different specialties. This list can be used as the basis for further discussion, development, and enhancement. In this paper we describe a classification system

  19. Elastic emission polishing

    Energy Technology Data Exchange (ETDEWEB)

    Loewenthal, M.; Loseke, K.; Dow, T.A.; Scattergood, R.O.

    1988-12-01

    Elastic emission polishing, also called elastic emission machining (EEM), is a process where a stream of abrasive slurry is used to remove material from a substrate and produce damage free surfaces with controlled surface form. It is a noncontacting method utilizing a thick elasto-hydrodynamic film formed between a soft rotating ball and the workpiece to control the flow of the abrasive. An apparatus was built in the Center, which consists of a stationary spindle, a two-axis table for the workpiece, and a pump to circulate the working fluid. The process is controlled by a programmable computer numerical controller (CNC), which presently can operate the spindle speed and movement of the workpiece in one axis only. This apparatus has been used to determine material removal rates on different material samples as a function of time, utilizing zirconium oxide (ZrO{sub 2}) particles suspended in distilled water as the working fluid. By continuing a study of removal rates the process should become predictable, and thus create a new, effective, yet simple tool for ultra-precision mechanical machining of surfaces.

  20. THE POLISH RECIPE

    Directory of Open Access Journals (Sweden)

    D.F. Spinu

    2017-06-01

    Full Text Available Twenty-six years ago the international community witnessed one of the most dramatic changes in economic systems. Naturally, the fall of communism in Eastern Europe and its consequences were events difficult to judge and anticipate in their immediate aftermath. Today, we have gained a much more coherent perspective on their meaning. The political liberalization of Poland in 1989 and its transition to the market economy was generally perceived as the most successful of all post-communist countries. From 1990 to 2013, Poland experienced the most outstanding economic growth within the former communist bloc. It doubled its GDP in real terms and became the only country to experience economic growth during the financial crisis of 2008-09. However, the polish secret recipe lies in the "shock therapy" adopted at the beginning of the 90's. The aim of this paper is to examine the importance of the Balcerowicz's program in creating the basis for economic stability and growth through privatization, liberalization of foreign trade, monetary reform and an open economy. We will also review the impact of this unprecedented transformation in shaping a strong, market-oriented economy.

  1. Using description logics for managing medical terminologies

    NARCIS (Netherlands)

    Cornet, R.; Abu-Hanna, A.

    2003-01-01

    Medical terminological knowledge bases play an increasingly important role in medicine. As their size and complexity are growing, the need arises for a means to verify and maintain the consistency and correctness of their contents. This is important for their management as well as for providing

  2. 21 CFR 25.5 - Terminology.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Terminology. 25.5 Section 25.5 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ENVIRONMENTAL IMPACT...). (12) Legislation (40 CFR 1508.17). (13) Major Federal action (40 CFR 1508.18). (14) Mitigation (40 CFR...

  3. The National Terminology Services: A New Paradigm

    African Journals Online (AJOL)

    of terminology in all the South African languages. It supports government in the formulation, development, implementation and maintenance of national policy and strategies concerning technical languages. In this way it helps to promote mutual scientific and technical communication in all South African communities.

  4. Terminology for pregnancy loss prior to viability

    DEFF Research Database (Denmark)

    Kolte, A M; Bernardi, L A; Christiansen, O B

    2015-01-01

    Pregnancy loss prior to viability is common and research in the field is extensive. Unfortunately, terminology in the literature is inconsistent. The lack of consensus regarding nomenclature and classification of pregnancy loss prior to viability makes it difficult to compare study results from d...

  5. Magnetism in meteorites. [terminology, principles and techniques

    Science.gov (United States)

    Herndon, J. M.; Rowe, M. W.

    1974-01-01

    An overview of this subject is presented. The paper includes a glossary of magnetism terminology and a discussion of magnetic techniques used in meteorite research. These techniques comprise thermomagnetic analysis, alternating field demagnetization, thermal demagnetization, magnetic anisotropy, low-temperature cycling, and coercive forces, with emphasis on the first method. Limitations on the validity of paleointensity determinations are also discussed.

  6. Jargon that Computes: Today's PC Terminology.

    Science.gov (United States)

    Crawford, Walt

    1997-01-01

    Discusses PC (personal computer) and telecommunications terminology in context: Integrated Services Digital Network (ISDN); Asymmetric Digital Subscriber Line (ADSL); cable modems; satellite downloads; T1 and T3 lines; magnitudes ("giga-,""nano-"); Central Processing Unit (CPU); Random Access Memory (RAM); Universal Serial Bus…

  7. Thoughts on ISO and the Development of Terminologies in Southern ...

    African Journals Online (AJOL)

    language policy decisions on the development of technical languages, terminologies, generallexi- cography and the dissemination of information will also require special attention in a new South. Africa. Keywords: STANDARDISATION, TERMINOLOGY, TECHNICAL LANGUAGE, TERM-. BANK, LEXICAL DATA ...

  8. A Need for Logical and Consistent Anatomical Nomenclature for Cutaneous Nerves of the Limbs

    Science.gov (United States)

    Gest, Thomas R.; Burkel, William E.; Cortright, Gerald W.

    2009-01-01

    The system of anatomical nomenclature needs to be logical and consistent. However, variations in translation to English of the Latin and Greek terminology used in Nomina Anatomica and Terminologia Anatomica have led to some inconsistency in the nomenclature of cutaneous nerves in the limbs. An historical review of cutaneous nerve nomenclature…

  9. Polish Toxic Currency Options

    Directory of Open Access Journals (Sweden)

    Waldemar Gontarski

    2009-04-01

    Full Text Available Toxic currency options are defined on the basis of the opposition to the nature (essence of an option contract, which is justified in terms of norms founded on the general law clause of characteristics (nature of a relation (which represents an independent premise for imposing restrictions on the freedom of contracts. So-understood toxic currency options are unlawful. Indeed they contravene iuris cogentis regulations. These include for instance option contracts, which are concluded with a bank, if the bank has not informed about option risk before concluding the contract; or the barrier options, which focus only on the protection of banks interests. Therefore, such options may appear to be invalid. Therefore, performing contracts for toxic currency options may be qualified as a criminal mismanagement. For the sake of security, the manager should then take into consideration filing a claim for stating invalidity (which can be made in a court verdict. At the same time, if the supervisory board member in a commercial company, who can also be a subject to mismanagement offences, commits an omission involving lack of reaction (for example, if he/she fails to notify of the suspected offence committed by the management board members acting to the companys detriment when the management board makes the company conclude option contracts which are charged with absolute invalidity the supervisory board member so acting may be considered to act to the companys detriment. In the most recent Polish jurisprudence and judicature the standard of a good host is treated to be the last resort for determining whether the managers powers resulting from criminal regulations were performed. The manager of the exporter should not, as a rule, issue any options. Issuing options always means assuming an obligation. In the case of currency put options it is an absolute obligation to purchase a given amount in euro at exchange rate set in advance. On the other hand issuing

  10. How to Manage and Plan Terminology: Creating Management TDBs

    Directory of Open Access Journals (Sweden)

    Gordana Jakić

    2016-09-01

    Full Text Available Scientific and technical terminology represents a very topical issue in economically and technologically dependent countries with small languages such as Serbian. The current terminological problems in the Serbian language, especially in specialized areas that are experiencing dynamic development, are: Anglicization of the language for special purposes, underdeveloped and unstable terminology, and lack of adequate and modern terminological and lexical resources. On the one hand, the terminological problems listed above are of concern to subject-field specialists, since inadequate and non-existent terminology significantly affects the representation, transfer and management of specialized knowledge and information. On the other hand, terminology and language planners point to the growing need for immediate and systematic intervention aimed at terminology harmonization, consolidation and standardization. In spite of the awareness, there is no systematic approach to the solving of terminological problems in Serbian. In addition, practical activities regarding the collection and organization of terminology are few and reduced to individual initiatives. Under the paradigm of language planning (LP-oriented terminology management (2, this paper is going to address a practical activity of terminology management: the creation of a Serbian management terminology database (TDB with equivalent terms in English. The paper will discuss the methodology of terminology work, potential obstacles in termbase creation, as well as potential benefits that such a resource would have on all its potential users: management specialists and practitioners, professional translators, and language and terminology planners. A particular focus will be placed on the potential significance that this kind of a database would have for terminology policy and planning in the Serbian language, on the one hand, and knowledge transfer and management, on the other hand.

  11. National Language and Terminology Policies — A South African ...

    African Journals Online (AJOL)

    National Language and Terminology Policies — A South African Perspective. M Alberts. Abstract. Terminology plays a pivotal role in language development and the promotion of multilingualism. This article discusses the issue of multilingualism regarding terminology policies as seen from an African perspective. Special ...

  12. Terminology development at tertiary institutions: A South African ...

    African Journals Online (AJOL)

    Terminology development at tertiary institutions: A South African perspective. M Alberts. Abstract. There is a dire need in South Africa for multilingual polythematic terminology. Currently no tertiary institution presents terminology theory and practice as a fully-fledged subject and there is also no sufficient mechanism for the ...

  13. A plea for an extension of the anatomical nomenclature: The locomotor system

    Directory of Open Access Journals (Sweden)

    Vladimir Musil

    2017-11-01

    Full Text Available Anatomical nomenclature is the main tool of communication in morphology, anatomy and other medical disciplines as well as in medical education, and thus needs to be exact, flawless, elaborate and correct. The Terminologia Anatomica (TA is a thorough and extensive list of anatomical terms and their definitions, and the current standard for human anatomical terminology. Although several revisions to the TA have been made in the last 20 years, some important anatomical structures are still not included. This article is aimed at correcting and extending the anatomical nomenclature described in the TA. We gathered and presented a list of anatomical terms, with their definitions and explanations, to provoke a discussion about correcting and extending the TA. Our list comprises of 96 terms related to the locomotor system of the human body, i.e., the bones, joints, muscles and related structures.

  14. A plea for an extension of the anatomical nomenclature: The locomotor system.

    Science.gov (United States)

    Musil, Vladimir; Blankova, Alzbeta; Baca, Vaclav

    2017-11-16

    Anatomical nomenclature is the main tool of communication in morphology, anatomy and other medical disciplines as well as in medical education, and thus needs to be exact, flawless, elaborate and correct. The Terminologia Anatomica (TA) is a thorough and extensive list of anatomical terms and their definitions, and the current standard for human anatomical terminology. Although several revisions to the TA have been made in the last 20 years, some important anatomical structures are still not included. This article is aimed at correcting and extending the anatomical nomenclature described in the TA. We gathered and presented a list of anatomical terms, with their definitions and explanations, to provoke a discussion about correcting and extending the TA. Our list comprises of 96 terms related to the locomotor system of the human body, i.e., the bones, joints, muscles and related structures.

  15. ON THE PECULIARITIES OF TERMINOLOGICAL WORD GROUP WITH MEANING VALUE BASED PRICING / ЦЕНА-СТОИМОСТЬ / CENA-WARTOŚĆ AND THE PROBLEM OF THEIR EQUIVALENCE IN TRANSLATION

    Directory of Open Access Journals (Sweden)

    Irene Rolak

    2014-10-01

    Full Text Available The paper presents a semantic analysis of a range of selected terms along with contrastive characteristics of their syntagmatic and paradigmatic peculiarities. “Price”, “cost” and “value” are the basic notions of market economy and, correspondingly, the lexemes denoting them. As a result, the paper focuses on the information these lexemes transmit along with their equivalents in the Polish and Russian languages. Probable variants of their translation are also shown. The problem of evaluation of their linguistic volume refers to the functioning of these words in economic discourse as general notions (hyperonyms that involve a range of particular ones. The author takes into consideration the factors, which have the impact on translation of the Polish and Russian terminological phrases (word groups that are often calques of English terms. An adequate translation is influenced by the following: understanding of terminological and non-terminological nature of a phrase being translated, acquaintance with idiomatic expressions used at translation of English terminological lexis, taking into account the regularities of syntagmatic collocation of a word. On the basis of use of phrases from the Russian and Polish economic discourses, the author shows the characteristics of use for selected terms and gives some adequate variants of their translation. The analysis of relations within the terminological group under study has shown that in the process of translation and choice for synonyms terminological and non-terminological meaning of a word, use of idiomatic expressions in both target languages that are calques from English, a tradition in realization of syntagmatic collocation of a word should be taken into consideration.

  16. Lost and found anatomical terms: Crista choanalis vomeris.

    Science.gov (United States)

    Marusić, Ana; Vinter, Ivan; Krmpotić-Nemanić, Jelena

    2006-05-01

    Pars cuneiformis vomeris and Crista choanalis are morphological structures on the vomer listed in the current official anatomical nomenclature, Terminologia anatomica, but are either not mentioned or incorrectly described in different anatomical books. The term Crista choanalis vomeris was originally proposed by Drago Perović in 1958 to describe the vertical crest beginning at the angle of the alae vomeris, running downwards to the posterior free margin of the vomer. Perović also described the part of the vomer behind this crest was shaped as a cone, and termed it Pars cuneiformis vomeris. Because of their important contributions to the function of the respiratory pathway, Crista choanalis vomeris and Pars cuneiformis vomeris deserve proper definitions in the anatomical terminology.

  17. Efficient polishing of aspheric optics

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, J.S.; Piscotty, M.A.; Nguyen, N.Q.; Landram, C.S.; Ng, L.C.

    1997-04-15

    The objectives of this project are to develop, evaluate, and optimize novel designs for a polishing tool intended for ultra-precise figure corrections on aspheric optics with tolerances typical of those required for use in extreme ultraviolet (EUV) projection lithography. This work may lead to an enhanced US industrial capability for producing optics for EUV, x-ray and, other high precision applications. LLNL benefits from developments in computer-controlled polishing and the insertion of fluid mechanics modeling into the precision manufacturing area. Our accomplishments include the numerical estimation of the hydrodynamic shear stress distribution for a new polishing tool that directs and controls the interaction of an abrasive slurry with an optical surface. A key milestone is in establishing a correlation between the shear stress predicted using our fluid mechanics model and the observed removal footprint created by a prototype tool. In addition, we demonstrate the ability to remove 25 nm layers of optical glass in a manner qualitatively similar to macroscopic milling operations using a numerically- controlled machine tool. Other accomplishments include the development of computer control software for directing the polishing tool and the construction of a polishing testbed.

  18. Greek language: analysis of the cardiologic anatomical etymology: past and present.

    Science.gov (United States)

    Bezas, Georges; Werneck, Alexandre Lins

    2012-01-01

    The Greek language, the root of most Latin anatomical terms, is deeply present in the Anatomical Terminology. Many studies seek to analyze etymologically the terms stemming from the Greek words. In most of these studies, the terms appear defined according to the etymological understanding of the respective authors at the time of its creation. Therefore, it is possible that the terms currently used are not consistent with its origin in ancient Greek words. We selected cardiologic anatomical terms derived from Greek words, which are included in the International Anatomical Terminology. We performed an etymological analysis using the Greek roots present in the earliest terms. We compared the cardiologic anatomical terms currently used in Greece and Brazil to the Greek roots originating from the ancient Greek language. We used morphological decomposition of Greek roots, prefixes, and suffixes. We also verified their use on the same lexicons and texts from the ancient Greek language. We provided a list comprising 30 cardiologic anatomical terms that have their origins in ancient Greek as well as their component parts in the International Anatomical Terminology. We included the terms in the way they were standardized in Portuguese, English, and Modern Greek as well as the roots of the ancient Greek words that originated them. Many works deal with the true origin of words (etymology) but most of them neither returns to the earliest roots nor relate them to their use in texts of ancient Greek language. By comparing the world's greatest studies on the etymology of Greek words, this paper tries to clarify the differences between the true origin of the Greek anatomical terms as well as the origins of the cardiologic anatomical terms more accepted today in Brazil by health professionals.

  19. Harmonizing intelligence terminologies in business: Literature review

    Directory of Open Access Journals (Sweden)

    Sivave Mashingaidze

    2014-11-01

    Full Text Available The principal objective of this article is to do a literature review of different intelligence terminology with the aim of establishing the common attributes and differences, and to propose a universal and comprehensive definition of intelligence for common understanding amongst users. The findings showed that Competitive Intelligence has the broadest scope of intelligence activities covering the whole external operating environment of the company and targeting all levels of decision-making for instance; strategic intelligence, tactical intelligence and operative intelligence. Another terminology was found called Cyber IntelligenceTM which encompasses competitor intelligence, strategic intelligence, market intelligence and counterintelligence. In conclusion although CI has the broadest scope of intelligence and umbrella to many intelligence concepts, still Business Intelligence, and Corporate Intelligence are often used interchangeably as CI

  20. Cannabinoids cases in polish athletes

    OpenAIRE

    A Pokrywka; Z Obmiński; D Kwiatkowska; R Grucza

    2009-01-01

    The aim of this study was to investigate the number of cases and the profiles of Polish athletes who had occasionally been using marijuana or hashish throughout the period of 1998-2004, with respect to: sex, age, and discipline of sport as well as the period of testing (in- and out-of-competition). Results of the study were compared with some data reported by other WADA accredited anti-doping laboratories. Totally, 13 631 urine samples taken from Polish athletes of both sexes, aged 10-67 year...

  1. Preservation of information in terminology transcoding.

    Science.gov (United States)

    Griffon, Nicolas; Merabti, Tayeb; Cormont, Sylvie; Tariel-Laurent, Sophie; Massari, Philippe; Lepage, Eric; Chniti, Amina; Daniel, Christel; Darmoni, Stéfan J

    2014-01-01

    Linking interface terminologies (IT) to reference terminologies (RT) in flow of terminologies may allow health information system to be both usable and interoperable. Two French university hospitals worked independently on such a flow from the prescription of lab-test to the display of the corresponding results. The aim of this study was to evaluate the transmission of information in these two hospitals communication. An expert, supported by natural language processing tool, created the gold standard link between the 2 prescription ITs i.e. the terms that share the same meaning. A semantic pathway was defined to allow the mapping of one prescription IT to the other, through LOINC® and SNOMED®, the RT chosen by each hospital, respectively. The capacity of the semantic pathway to identify the correct links was computed. The expert found 218 links between the 2 prescription ITs (containing 580 and 374 terms that are linked to RT). The semantic pathway correctly identifies 96 of these links (44.0% [37.4-50.6]). The recall was not as good as expected, even though the semantic pathway was created in order to maximize it. Using different RT in different hospitals is not an efficient solution. The use of LOINC® seems to be preferable as a RT for prescription.

  2. Polish-Bulgarian-Russian, Bulgarian-Polish-Russian or Russian-Bulgarian-Polish dictionary?

    Directory of Open Access Journals (Sweden)

    Violetta Koseska-Toszewa

    2015-11-01

    Full Text Available Polish-Bulgarian-Russian, Bulgarian-Polish-Russian or Russian-Bulgarian-Polish dictionary? The trilingual dictionary (M. Duszkin, V. Koseska, J. Satoła and A. Tzoneva is being elaborated based on a working Polish-Bulgarian-Russian electronic parallel corpus authored by Maksim Duszkin, Violetta Koseska-Toszewa and Joanna Satoła-Staśkowiak, and works by A. Tzoneva. It is the first corpus comparing languages belonging to three different Slavic language groups: western, southern and eastern. Works on the dictionary are based on Gramatyka konfrontatywna bułgarsko-polska (Bulgarian-Polish confrontative grammar and the proposed there semantic-oriented interlanguage. Two types of classifiers have been introduced into the dictionary: classic and semantic. The trilingual dictionary will present a consistent and homogeneous set of facts of grammar and semantics. The Authors point out that in a traditional dictionary it is not clear for example whether aspect should be understood as imperfective / perfective form of a verb or as its meaning. Therefore in the dictionary forms and meaning are separated in a regular way. Imperfective verb form has two meanings: state and configuration of states and events culminating in state. Also perfective verb form has two meanings: event and configuration of states and events culminating in event. These meanings are described by the semantic classifiers, respectively, state and event, state1 and event1. The way of describing language units, mentioned in the article, gives a possibility to present language material (Polish, Bulgarian, Russian in any required order, hence the article’s title.

  3. Cannabinoids cases in polish athletes

    Directory of Open Access Journals (Sweden)

    A Pokrywka

    2009-07-01

    Full Text Available The aim of this study was to investigate the number of cases and the profiles of Polish athletes who had occasionally been using marijuana or hashish throughout the period of 1998-2004, with respect to: sex, age, and discipline of sport as well as the period of testing (in- and out-of-competition. Results of the study were compared with some data reported by other WADA accredited anti-doping laboratories. Totally, 13 631 urine samples taken from Polish athletes of both sexes, aged 10-67 years, performing 46 disciplines of sport were tested. Cannabinoids were detected in 267 samples. Among Polish athletes the relative number of positive THC (tetrahydrocannabinol samples was one of the highest in Europe. The group of young Polish athletes (aged 16-24 years was the most THC-positive. THC-positive cases were noted more frequently in male athletes tested during out of competitions. The so-called contact sports (rugby, ice hockey, skating, boxing, badminton, body building and acrobatic sports were those sports, where the higher risk of cannabis use was observed. The legal interpretation of some positive cannabinoids results would be difficult because of some accidental and unintentional use of the narcotics by sportsmen. It was concluded that national anti-doping organizations (NADO’s, which are competent to judge whether the anti-doping rules were violated, should take into account the possibility of non-intentional doping use of cannabinoids via passive smoking of marijuana.

  4. Sensing roughness and polish direction

    DEFF Research Database (Denmark)

    Jakobsen, Michael Linde; Olesen, Anders Sig; Larsen, Henning Engelbrecht

    2016-01-01

    needs information about the RMS-value of the surface roughness and the current direction of the scratches introduced by the polishing process. The RMS-value indicates to the operator how far he is from the final finish, and the scratch orientation is often specified by the customer in order to avoid...... structures and light scattered from scratches....

  5. Neuroimaging Feature Terminology: A Controlled Terminology for the Annotation of Brain Imaging Features

    Science.gov (United States)

    Iyappan, Anandhi; Younesi, Erfan; Redolfi, Alberto; Vrooman, Henri; Khanna, Shashank; Frisoni, Giovanni B.; Hofmann-Apitius, Martin

    2017-01-01

    Ontologies and terminologies are used for interoperability of knowledge and data in a standard manner among interdisciplinary research groups. Existing imaging ontologies capture general aspects of the imaging domain as a whole such as methodological concepts or calibrations of imaging instruments. However, none of the existing ontologies covers the diagnostic features measured by imaging technologies in the context of neurodegenerative diseases. Therefore, the Neuro-Imaging Feature Terminology (NIFT) was developed to organize the knowledge domain of measured brain features in association with neurodegenerative diseases by imaging technologies. The purpose is to identify quantitative imaging biomarkers that can be extracted from multi-modal brain imaging data. This terminology attempts to cover measured features and parameters in brain scans relevant to disease progression. In this paper, we demonstrate the systematic retrieval of measured indices from literature and how the extracted knowledge can be further used for disease modeling that integrates neuroimaging features with molecular processes. PMID:28731430

  6. Transregionalism: Problems of Terminology and Conceptualization

    Directory of Open Access Journals (Sweden)

    D. A. Kuznetsov

    2016-01-01

    Full Text Available Today’s world is witnessing the remarkable development of transregional ties between distinct regions and powers within the international system evolving towards multipolarity. However, the essence of transregionalism remains understudied to the extent that there is no clear consensus for which terminology should be used to define this phenomenon. The article compares existing approaches to transregionalism conceptualization, analyzes the differences in the use of terms, and discusses the global impact of transregional relations on world politics and economy. The author advocates a term transregionalism (instead of interregionalism, crossregionalism, macroregionalization etc. and suggests its definition.

  7. Terminological Ontologies for Risk and Vulnerability Analysis

    DEFF Research Database (Denmark)

    Madsen, Bodil Nistrup; Erdman Thomsen, Hanne

    2014-01-01

    Risk and vulnerability analyses are an important preliminary stage in civil contingency planning. The Danish Emergency Management Agency has developed a generic model and a set of tools that may be used in the preparedness planning, i.e. for identifying and describing society’s critical functions......, for formulating threat scenarios and for assessing consequences. Terminological ontologies, which are systems of domain specific concepts comprising concept relations and characteristics, are useful, both when describing the central concepts of risk and vulnerability analysis (meta concepts), and for further...

  8. Revisiting the Global Software Engineering Terminology

    DEFF Research Database (Denmark)

    Tell, Paolo; Giuffrida, Rosalba; Shah, Hina

    2013-01-01

    Even though Global Software Engineering (GSE) has been a research topic of interest for many years, some of its ground terminology is still lacking a unified, coherent, and shared definition and/or classification. The purpose of this report is to collect, outline, and relate several fundamental......, communication, and awareness taken from the Computer-Supported Cooperative Work (CSCW) tradition. This report represents on the one hand a starting point to help stimulate fruitful discussions in the relevant communities with regards to the more controversial and delicate topics, while on the other hand...

  9. Reconciliation of ontology and terminology to cope with linguistics.

    Science.gov (United States)

    Baud, Robert H; Ceusters, Werner; Ruch, Patrick; Rassinoux, Anne-Marie; Lovis, Christian; Geissbühler, Antoine

    2007-01-01

    To discuss the relationships between ontologies, terminologies and language in the context of Natural Language Processing (NLP) applications in order to show the negative consequences of confusing them. The viewpoints of the terminologist and (computational) linguist are developed separately, and then compared, leading to the presentation of reconciliation among these points of view, with consideration of the role of the ontologist. In order to encourage appropriate usage of terminologies, guidelines are presented advocating the simultaneous publication of pragmatic vocabularies supported by terminological material based on adequate ontological analysis. Ontologies, terminologies and natural languages each have their own purpose. Ontologies support machine understanding, natural languages support human communication, and terminologies should form the bridge between them. Therefore, future terminology standards should be based on sound ontology and do justice to the diversities in natural languages. Moreover, they should support local vocabularies, in order to be easily adaptable to local needs and practices.

  10. Neuroimaging feature terminology: A controlled terminology for the annotation of brain imaging features

    NARCIS (Netherlands)

    Iyappan, A. (Anandhi); Younesi, E. (Erfan); Redolfi, A. (Alberto); H.A. Vrooman (Henri); Khanna, S. (Shashank); G.B. Frisoni (Giovanni B.); M. Hofmann-Apitius (Martin)

    2017-01-01

    textabstractOntologies and terminologies are used for interoperability of knowledge and data in a standard manner among interdisciplinary research groups. Existing imaging ontologies capture general aspects of the imaging domain as a whole such as methodological concepts or calibrations of imaging

  11. Terminology Guidance to Make Your Work Easier. English, French, Spanish, German, Russian. Terminology Circular No. 6.

    Science.gov (United States)

    International Labour Office, Geneva (Switzerland). Editorial and Document Services Dept.

    This terminology circular is one of a series issued by the International Labour Office on an irregular basis, designed to facilitate the work of translators, editors, and other staff members. The circular contains official titles of personnel, offices, bureaus, branches, departments, and other organizational units of the ILO. Entries are listed…

  12. Anatomical Terms in J. Basanavičius’ Manuscript Anatomijos ir medicinos vardyno medžiaga

    Directory of Open Access Journals (Sweden)

    Nijolė Litevkienė

    2011-12-01

    Full Text Available The historical evolution of anatomical terms dates to antiquity, to the writings of Hippocrates. The historical development of Lithuanian anatomical terminology goes back to the seventeenth century. Anatomical terminology, as a comprehensive system of the names of human body parts is being compiled gradually. The originator of Lithuanian medical terminology was J. Basanavičius. The research paper aims to analyze anatomical terms used in J. Basanavičius’ manuscript Anatomijos ir medicinos vardyno medžiaga (further BM and to compare them with the terms in the Dictionary of Medical Terms ( Medicinos terminų žodynas 1980. The research focuses on the analysis of some aspects of differentiation and congruity of simple and multi-word anatomical terms of the manuscript and the dictionary. About 270 Lithuanian anatomical terms with Russian and Latin equivalents were collected by J. Basanavičius. The results show that the major part of the terms are different, the lesser part of the terms are identical.

  13. Harmonising Nursing Terminologies Using a Conceptual Framework.

    Science.gov (United States)

    Jansen, Kay; Kim, Tae Youn; Coenen, Amy; Saba, Virginia; Hardiker, Nicholas

    2016-01-01

    The International Classification for Nursing Practice (ICNP®) and the Clinical Care Classification (CCC) System are standardised nursing terminologies that identify discrete elements of nursing practice, including nursing diagnoses, interventions, and outcomes. While CCC uses a conceptual framework or model with 21 Care Components to classify these elements, ICNP, built on a formal Web Ontology Language (OWL) description logic foundation, uses a logical hierarchical framework that is useful for computing and maintenance of ICNP. Since the logical framework of ICNP may not always align with the needs of nursing practice, an informal framework may be a more useful organisational tool to represent nursing content. The purpose of this study was to classify ICNP nursing diagnoses using the 21 Care Components of the CCC as a conceptual framework to facilitate usability and inter-operability of nursing diagnoses in electronic health records. Findings resulted in all 521 ICNP diagnoses being assigned to one of the 21 CCC Care Components. Further research is needed to validate the resulting product of this study with practitioners and develop recommendations for improvement of both terminologies.

  14. [Norwegian physicians' knowledge of Latin medical terminology].

    Science.gov (United States)

    Lindekleiv, Haakon

    2005-12-15

    It is well established that medical terminology is firmly based in Latin and Greek. However, teaching in Latin and medical terminology is not adequate in the medical education in Norway. A questionnaire on medical practitioners' knowledge of medical Latin was handed out among doctors participating in further education at the University of Tromsø, spring 2005. The questionnaire was divided into three parts: knowledge of Latin medical words, Latin names on diseases, and grammar (Latin word endings). The response rate was 102/121 (84 %).; 102 doctors participated, including 51 general practitioners. The understanding of Latin medical words was generally good. 70 % (71/102) of the doctors had less than three errors. The knowledge of Latin names for diseases was also quite good, with 73 % (74/102) having less than three errors. However, there were many grave mistakes. The ability to give correct word endings in plural nominative and singular genitive was almost absent; 85 % (87/102) made four or more errors. Although Norwegian medical practitioners have a certain degree of skills in medical Latin, their knowledge is not sufficient. Marginal knowledge of important medical terms may complicate communication between doctors. A compulsory minimum of training in medical nomenclature should be a part of the curriculum in medical schools.

  15. Analyzing rare diseases terms in biomedical terminologies

    Directory of Open Access Journals (Sweden)

    Erika Pasceri

    2012-03-01

    Full Text Available Rare disease patients too often face common problems, including the lack of access to correct diagnosis, lack of quality information on the disease, lack of scientific knowledge of the disease, inequities and difficulties in access to treatment and care. These things could be changed by implementing a comprehensive approach to rare diseases, increasing international cooperation in scientific research, by gaining and sharing scientific knowledge about and by developing tools for extracting and sharing knowledge. A significant aspect to analyze is the organization of knowledge in the biomedical field for the proper management and recovery of health information. For these purposes, the sources needed have been acquired from the Office of Rare Diseases Research, the National Organization of Rare Disorders and Orphanet, organizations that provide information to patients and physicians and facilitate the exchange of information among different actors involved in this field. The present paper shows the representation of rare diseases terms in biomedical terminologies such as MeSH, ICD-10, SNOMED CT and OMIM, leveraging the fact that these terminologies are integrated in the UMLS. At the first level, it was analyzed the overlap among sources and at a second level, the presence of rare diseases terms in target sources included in UMLS, working at the term and concept level. We found that MeSH has the best representation of rare diseases terms.

  16. The health terminology project glossaries` structure

    Directory of Open Access Journals (Sweden)

    Sátia Marini

    2014-04-01

    Full Text Available Current paper was motivated by a Master´s degree in Translation Studies on one of the glossaries of the Health Terminology Project (PTS of the Ministry of Health (MS inBrazil, by which the products developed by the project were analyzed. The authors would like to forward their experience earned from the development of these instruments and from the evolution of the glossary´s layout and structure. Although within the same institution, each instrument is made suitable to the specific purpose of each area and the terminology project accumulates experience by the constant improvement of previously developed glossaries (adding new terms; providing the equivalent word in other languages for terms already defined and by the establishment of new ones. The evolution of the structure of the glossaries was qualitatively analyzed; remarks on the types of cross references were made; a quantitative survey of their main features was undertaken. Finally, the importance of this type of work should be underscored either within the government, or in the academy or in private companies, for the sharing of intellectual knowledge.

  17. Terminology and methodology in modelling for water quality management

    DEFF Research Database (Denmark)

    Carstensen, J.; Vanrolleghem, P.; Rauch, W.

    1997-01-01

    of the most widely used terms for characterising models and within the process of model building. It is essential to the ever growing society of researchers within water quality management, that communication is eased by establishing a common terminology. This should not be done by giving broader definitions......There is a widespread need for a common terminology in modelling for water quality management. This paper points out sources of confusion in the communication between researchers due to misuse of existing terminology or use of unclear terminology. The paper attempts to clarify the context...

  18. Interoperable Archetypes With a Three Folded Terminology Governance.

    Science.gov (United States)

    Pederson, Rune; Ellingsen, Gunnar

    2015-01-01

    The use of openEHR archetypes increases the interoperability of clinical terminology, and in doing so improves upon the availability of clinical terminology for both primary and secondary purposes. Where clinical terminology is employed in the EPR system, research reports conflicting a results for the use of structuring and standardization as measurements of success. In order to elucidate this concept, this paper focuses on the effort to establish a national repository for openEHR based archetypes in Norway where clinical terminology could be included with benefit for interoperability three folded.

  19. Polish energy-system modernisation

    International Nuclear Information System (INIS)

    Drozdz, M.

    2003-01-01

    The Polish energy-system needs intensive investments in new technologies, which are energy efficient, clean and cost effective. Since the early 1990s, the Polish economy has had practically full access to modern technological devices, equipment and technologies. Introducing new technologies is a difficult task for project teams, constructors and investors. The author presents a set of principles for project teams useful in planning and energy modernisation. Several essential features are discussed: Energy-efficient appliances and systems; Choice of energy carriers, media and fuels; Optimal tariffs, maximum power and installed power; Intelligent, integrated, steering systems; Waste-energy recovery; Renewable-energy recovery. In practice there are several difficulties connected with planning and realising good technological and economic solutions. The author presents his own experiences of energy-system modernisation of industrial processes and building new objects. (Author)

  20. FINANCIAL SECURITY OF POLISH HOUSEHOLDS

    Directory of Open Access Journals (Sweden)

    Agnieszka Kozera

    2016-09-01

    Full Text Available  A household’s fi nancial security is essential for the satisfaction of the needs and wants of its members, both communal and individual. It constitutes a kind of foundation for all of a household’s fi nancial decisions that impact its standard of living. The article aims to assess the level of fi nancial security of Polish households in 2005–2013. The research draws on data from Genworth Index, HBS conducted by the Central Statistical Offi ce (GUS and Social Diagnosis (Diagnoza społeczna overseen by the Social Monitoring Council. The study shows that Poland is characterized by a low level of fi nancial security relative to other European countries, especially Western and Scandinavian. More than three-quarters of Polish households experience fi nancial problems and exhibit both a low propensity to save, and low savings rates.

  1. Energy savings in Polish buildings

    Energy Technology Data Exchange (ETDEWEB)

    Markel, L.C.; Gula, A.; Reeves, G.

    1995-12-31

    A demonstration of low-cost insulation and weatherization techniques was a part of phase 1 of the Krakow Clean Fossil Fuels and Energy Efficient Project. The objectives were to identify a cost-effective set of measures to reduce energy used for space heating, determine how much energy could be saved, and foster widespread implementation of those measures. The demonstration project focused on 4 11-story buildings in a Krakow housing cooperative. Energy savings of over 20% were obtained. Most important, the procedures and materials implemented in the demonstration project have been adapted to Polish conditions and applied to other housing cooperatives, schools, and hospitals. Additional projects are being planned, in Krakow and other cities, under the direction of FEWE-Krakow, the Polish Energie Cities Network, and Biuro Rozwoju Krakowa.

  2. Earnings Management in Polish Companies

    OpenAIRE

    Brzeszczyński, Janusz; Gajdka, Jerzy; Schabek, Tomasz

    2012-01-01

    This paper presents results of the investigation of a phenomenon known as "earnings management'' (EM) among the companies listed on the Polish stock market. The distribution of earnings per share (EPS) for the stocks around the threshold value of "zero" and the threshold of "recent performance" was analyzed in the period of years 1997-2010. Moreover, the changes of earnings for the stocks, which are suspected to manipulate their earnings, were also investigated. The results, which indicate as...

  3. LOVE in English and Polish

    Directory of Open Access Journals (Sweden)

    Małgorzata Brożyna Reczko

    2017-12-01

    Full Text Available LOVE in English and Polish The paper presents a sample contrastive analysis of the linguistic picture of love in English and Polish. The material used in the survey is drawn from lexicographic data, including the British National Corpus and Narodowy Korpus Języka Polskiego [National Corpus of Polish]. The paper focuses on the similarities and differences in conceptualizing the abstract concept of love in the English and Polish languages. An analytical method, developed by Bartmiński and associates, serves as the theoretical basis for the reconstruction of the linguistic picture of the world.   MIŁOŚĆ w języku angielskim i polskim Niniejszy artykuł to próba kontrastywnego porównania językowego obrazu świata MIŁOŚCI w języku angielskim i polskim. Materiał badawczy pochodzi głównie ze źródeł leksykograficznych: słowników oraz korpusów (Narodowego Korpusu Języka Polskiego oraz z korpusu języka angielskiego British National Corpus. Celem badania było poszukiwanie podobieństw i różnic w konceptualizacji MIŁOŚCI w tych dwóch językach. Metoda badawcza została zaczerpnięta z prac J. Bartmińskiego i dotyczy rekonstrukcji językowego obrazu świata różnych pojęć.

  4. 19th Polish Control Conference

    CERN Document Server

    Kacprzyk, Janusz; Oprzędkiewicz, Krzysztof; Skruch, Paweł

    2017-01-01

    This volume contains the proceedings of the KKA 2017 – the 19th Polish Control Conference, organized by the Department of Automatics and Biomedical Engineering, AGH University of Science and Technology in Kraków, Poland on June 18–21, 2017, under the auspices of the Committee on Automatic Control and Robotics of the Polish Academy of Sciences, and the Commission for Engineering Sciences of the Polish Academy of Arts and Sciences. Part 1 deals with general issues of modeling and control, notably flow modeling and control, sliding mode, predictive, dual, etc. control. In turn, Part 2 focuses on optimization, estimation and prediction for control. Part 3 is concerned with autonomous vehicles, while Part 4 addresses applications. Part 5 discusses computer methods in control, and Part 6 examines fractional order calculus in the modeling and control of dynamic systems. Part 7 focuses on modern robotics. Part 8 deals with modeling and identification, while Part 9 deals with problems related to security, fault ...

  5. Directly polished lightweight aluminum mirror

    Science.gov (United States)

    ter Horst, Rik; Tromp, Niels; de Haan, Menno; Navarro, Ramon; Venema, Lars; Pragt, Johan

    2017-11-01

    During the last ten years, Astron has been a major contractor for the design and manufacturing of astronomical instruments for Space- and Earth based observatories, such as VISIR, MIDI, SPIFFI, X-Shooter and MIRI. Driven by the need to reduce the weight of optically ultra-stiff structures, two promising techniques have been developed in the last years: ASTRON Extreme Lightweighting [1][2] for mechanical structures and an improved Polishing Technique for Aluminum Mirrors. Using one single material for both optical components and mechanical structure simplifies the design of a cryogenic instrument significantly, it is very beneficial during instrument test and verification, and makes the instrument insensitive to temperature changes. Aluminum has been the main material used for cryogenic optical instruments, and optical aluminum mirrors are generally diamond turned. The application of a polishable hard top coating like nickel removes excess stray light caused by the groove pattern, but limits the degree of lightweighting of the mirrors due to the bi-metal effect. By directly polishing the aluminum mirror surface, the recent developments at Astron allow for using a non-exotic material for light weighted yet accurate optical mirrors, with a lower surface roughness ( 1nm RMS), higher surface accuracy and reduced light scattering. This paper presents the techniques, obtained results and a global comparison with alternative lightweight mirror solutions. Recent discussions indicate possible extensions of the extreme light weight technology to alternative materials such as Zerodur or Silicon Carbide.

  6. A Guide to Terminology for Rh Immunoprophylaxis.

    Science.gov (United States)

    Sandler, S Gerald; Queenan, John T

    2017-09-01

    Rh immunoprophylaxis for Rh-negative women requires an understanding of terminology used for Rh blood typing laboratory reports. The pathophysiology of Rh hemolytic disease of the fetus and newborn was elucidated by studies in rhesus monkeys. Subsequent studies revealed that the human blood group antigen responsible for Rh hemolytic disease of the newborn (D antigen) is related to, but different from, the rhesus monkey antigen. Weak expression of the D antigen on red cells, originally termed D, is currently reported by laboratories as a "serologic weak D phenotype," which can be further defined by RHD genotyping to be either a weak D type or a partial D phenotype. Weak D types 1, 2, or 3 are molecularly defined RHD weak D types, which have an adequate number of intact D antigens to be managed safely as Rh-positive. Partial D phenotypes result from mutations causing loss of one or more D epitopes. Most persons with a partial D phenotype have sufficient D antigen to type as Rh-positive. Some women with a partial D phenotype are detected as serologic weak D phenotypes by routine Rh typing. Whether they type as Rh-positive or serologic weak D phenotype, after being exposed to Rh-positive red cells by transfusion or pregnancy, women with partial D phenotype can form anti-D antibodies and, if they do, are at risk for hemolytic disease of the fetus and newborn. A pregnant woman with a laboratory report of a serologic weak D phenotype should be further tested for her RHD genotype to resolve whether her case should be managed as Rh-positive or Rh-negative. For more than five decades, the practice of Rh immunoprophylaxis has remained unchanged in terms of the dose of Rh immune globulin and timing of injections. In contrast, advances in the science of Rh blood typing have resulted in a continuously evolving terminology, obliging obstetricians to update their vocabulary to guide their practice. The following review and glossary provide guidance for current Rh terminology and

  7. An Overview of Polish Martial Arts

    Directory of Open Access Journals (Sweden)

    Wojciech J. Cynarski

    2012-07-01

    Full Text Available The purpose of this study is to explain the revival of Polish martial arts from the perspectives of cultural sociology, the sciences of physical culture, and the humanistic theory of martial arts. The Polish Martial Arts (Polskie Sztuki Walki are a subject still requiring serious scientific examination, even in Poland. There are few works concerning the history of Polish weapons, and most only describe techniques for wielding specific types of edged weapons. Nevertheless, there is a large group of enthusiasts trying to restore and cultivate the old Polish tradition, a tradition with heavy emphasis on the art of fencing. The author knows many of the people and facts presented here, from personal observation and from direct participation in these arts. As a disciple of the late Master Yoshio Sugino (10th-dan Kobudo Katori Shinto-ryu, he fought against the Polish saber champion, and he has taken part in joint exhibitions of Polish and Japanese fencing.

  8. Dictionary of television and audiovisual terminology

    CERN Document Server

    Moshkovitz, Moshe

    2008-01-01

    "Recommended"--Booklist; "unique"--Reference Reviews; "handy"--Multimedia Information & Technology; "clear...descriptive"--Classic Images; "clear, practical definitions"--Rettig on Reference; "recommended"--E-Streams; "extensive and comprehensive"--ARBA; "a handy guide"--Communication Booknotes Quarterly. With television programming being broadcast worldwide in real time, the industry needs a common professional language. Constantly changing technology, however, has resulted in continuously changing terminology, sometimes leaving even the most knowledgeable broadcasters with a lack of understanding. In this dictionary over 1,500 terms and acronyms, both modern and classical, are presented. The definitions are designed to be straightforward and jargon-free (except where defining jargon), permitting ease of use to readers from a variety of fields. Ample cross-references are provided.

  9. Metaphor identification in a terminological dictionary

    Directory of Open Access Journals (Sweden)

    Maity Siqueira

    2009-04-01

    Full Text Available This paper aims at demonstrating that metaphor is not simply a literary device, but an integral part of everyday language. The Theory of Conceptual Metaphor suggests that our conceptual system is fundamentally metaphorical. Concepts arise from our everyday interaction with the world and semantic structure reflects the conceptual structure. Metaphor, therefore, is pervasive in everyday life, not just in language but in thought and action. Based on these assumptions, we analyzed a terminological dictionary on environmental law in order to find metaphorically used lexical items. Then, for every such item we tried to determine its most literal meaning in another context. In order to do so, we applied the method for identifying metaphor developed by the Pragglejaz Group (2007. The results confirm the pervasiveness of metaphor and indicate how polysemy is motivated. Moreover, there seems to be no clear boundaries between literal and figurative language.

  10. The tourism attractiveness of Polish libraries

    OpenAIRE

    Miedzińska, Magdalena; Tanaś, Sławoj

    2009-01-01

    The aim of the article is to draw the reader's attention to the tourism attractiveness of renowned Polish libraries. These have attained a tourism function due to tourism exploration and penetration, but remain in the shadow of other Polish cultural assets. The article outlines the historical geography of Polish libraries, an analysis of tourism assets and an attempt to classify and catalogue libraries in Poland.

  11. Thoughts on ISO and the development of terminologies in Southern ...

    African Journals Online (AJOL)

    The implications of language policy decisions on the development of technical languages, terminologies, general lexicography and the dissemination of information will also require special attention in a new South Africa. Keywords: standardisation, terminology, technical language, termbank, lexical data, networks, ...

  12. Using SNOMED CT to represent two interface terminologies.

    Science.gov (United States)

    Rosenbloom, S Trent; Brown, Steven H; Froehling, David; Bauer, Brent A; Wahner-Roedler, Dietlind L; Gregg, William M; Elkin, Peter L

    2009-01-01

    Interface terminologies are designed to support interactions between humans and structured medical information. In particular, many interface terminologies have been developed for structured computer based documentation systems. Experts and policy-makers have recommended that interface terminologies be mapped to reference terminologies. The goal of the current study was to evaluate how well the reference terminology SNOMED CT could map to and represent two interface terminologies, MEDCIN and the Categorical Health Information Structured Lexicon (CHISL). Automated mappings between SNOMED CT and 500 terms from each of the two interface terminologies were evaluated by human reviewers, who also searched SNOMED CT to identify better mappings when this was judged to be necessary. Reviewers judged whether they believed the interface terms to be clinically appropriate, whether the terms were covered by SNOMED CT concepts and whether the terms' implied semantic structure could be represented by SNOMED CT. Outcomes included concept coverage by SNOMED CT for study terms and their implied semantics. Agreement statistics and compositionality measures were calculated. The SNOMED CT terminology contained concepts to represent 92.4% of MEDCIN and 95.9% of CHISL terms. Semantic structures implied by study terms were less well covered, with some complex compositional expressions requiring semantics not present in SNOMED CT. Among sampled terms, those from MEDCIN were more complex than those from CHISL, containing an average 3.8 versus 1.8 atomic concepts respectively, pterms.

  13. Using SNOMED CT to Represent Two Interface Terminologies

    Science.gov (United States)

    Rosenbloom, S. Trent; Brown, Steven H.; Froehling, David; Bauer, Brent A.; Wahner-Roedler, Dietlind L.; Gregg, William M.; Elkin, Peter L.

    2009-01-01

    Objective Interface terminologies are designed to support interactions between humans and structured medical information. In particular, many interface terminologies have been developed for structured computer based documentation systems. Experts and policy-makers have recommended that interface terminologies be mapped to reference terminologies. The goal of the current study was to evaluate how well the reference terminology SNOMED CT could map to and represent two interface terminologies, MEDCIN and the Categorical Health Information Structured Lexicon (CHISL). Design Automated mappings between SNOMED CT and 500 terms from each of the two interface terminologies were evaluated by human reviewers, who also searched SNOMED CT to identify better mappings when this was judged to be necessary. Reviewers judged whether they believed the interface terms to be clinically appropriate, whether the terms were covered by SNOMED CT concepts and whether the terms' implied semantic structure could be represented by SNOMED CT. Measurements Outcomes included concept coverage by SNOMED CT for study terms and their implied semantics. Agreement statistics and compositionality measures were calculated. Results The SNOMED CT terminology contained concepts to represent 92.4% of MEDCIN and 95.9% of CHISL terms. Semantic structures implied by study terms were less well covered, with some complex compositional expressions requiring semantics not present in SNOMED CT. Among sampled terms, those from MEDCIN were more complex than those from CHISL, containing an average 3.8 versus 1.8 atomic concepts respectively, pterms. PMID:18952944

  14. Chemical Nomenclature, Symbols and Terminology for Use in School Science.

    Science.gov (United States)

    Smith, C. G.; And Others

    This report contains recommendations on chemical nomenclature, guidance on symbols, and terminology and units for physiochemical quantities. This report, intended to provide guidance to science teachers, consists of eleven sections: (1) general introduction; (2) introduction to symbols, terminology, and units for physiochemical quantities; (3)…

  15. Furthering the aim of multi-lingualism through integrated terminology ...

    African Journals Online (AJOL)

    This article aims at giving a brief account of how the activities of the Unit for isiXho-sa, one of the five units of the Stellenbosch University Language Centre, contributes to the devel-opment of integrated technical terminology lists for all departments of the University. After the reason for this terminology development has been ...

  16. Teaching medicine with a terminology/ontology portal.

    Science.gov (United States)

    Grosjean, Julien; Merabti, Tayeb; Griffon, Nicolas; Dahamna, Badisse; Darmoni, Stéfan J

    2012-01-01

    The Health Terminology/Ontology Portal (HeTOP) was developed to provide easy access to health terminologies and ontologie. The repository is not only dedicated to professionals but is also a valuable teaching tool. Currently, it provides access to thirty two health terminologies and ontologies available mainly in French or in English, but also in German, Italian, Chinese, etc. HeTOP can be used by both humans and computers via Web services. To integrate new resources into HeTOP, three steps are necessary: (1) designing a meta-model into which each terminology (or ontology) can be integrated, (2) developing a process to include terminologies into HeTOP, (3) building and integrating existing and new inter & intra-terminology semantic harmonization into HeTOP. Currently, 600 unique machines use the MeSH version of HeTOP every day and restricted terminologies/ontologies are used for teaching purposes in several medical schools in France. The multilingual version of HeTOP is available (URL: http://hetop.eu/) and provides free access to ICD10 and FMA in ten languages. HeTOP is a rich tool, useful for a wide range of applications and users, especially in education and resource indexing but also in information retrieval or performing audits in terminology management.

  17. terminology development at tertiary institutions: a south african ...

    African Journals Online (AJOL)

    user

    the language(s) of choice, the principle of having a shared language of learning ... and for the subject and language in question. When terminology is developed, one should adhere to basic terminologi- cal principles: — A concept is denoted by means ..... macy, law, journalism and media studies, education and psychology.

  18. Beyond teaching language: Towards terminological primacy in learners’ geometric conceptualisation

    Directory of Open Access Journals (Sweden)

    Humphrey U. Atebe

    2010-07-01

    Full Text Available This paper reports on a specific aspect of a broader geometry conceptualisation study that sought to explore and explicate learners’ knowledge of basic geometric terminology in selected Nigerian and South African high schools. It is framed by the notion that students’ acquisition of the correct terminology in school geometry is important for their success in the subject. The original study further aimed to determine the relationship that might exist between a learner’s ability in verbal geometry terminology tasks and his/her ability in visual geometry terminology tasks. A total of 144 learners (72 each from South Africa and Nigeria were selected for the study, using both the stratified and the fish‐bowl sampling techniques. A questionnaire consisting of a sixty‐item multiple‐choice objective test provided the data for the study. An overall percentage mean score of 44,17% obtained in the test indicated that learners in this study had only a limited knowledge of basic geometric terminology. The Nigerian subsample in the study had a weaker understanding of basic geometric terminology than their South African counterparts. Importantly, there were high positive correlations between participants’ ability in verbal geometry terminology tasks and their ability in visual geometry terminology tasks. These results are consistent with those of several earlier studies, and provide a reasonably firm basis for certain recommendations to be made.

  19. EFL Majors' Knowledge of Metalinguistic Terminology: A Comparative Study

    Science.gov (United States)

    Berry, Roger

    2009-01-01

    Two hundred and ninety-six English majors at universities in Poland, Austria and Hong Kong were given a 50-item questionnaire designed to evaluate their knowledge of grammatical terminology. The main aim was to identify whether the three populations were subject to differing "terminological cultures". This was found to be substantially…

  20. Alternative Concepts and Terminologies for Teaching African Art.

    Science.gov (United States)

    Chanda, Jacqueline

    1992-01-01

    Considers concepts and terminologies that focus on generalizations concerning traditional African art and cultures. Argues that alternative concepts and terminologies should be used in developing curriculum and in teaching non-Western art. Discusses traditional African religious beliefs, primitivism, and the function of African art objects. (KM)

  1. Multilingual Terminology Work in Theory – and in Practice

    DEFF Research Database (Denmark)

    Erdman Thomsen, Hanne; Madsen, Bodil Nistrup; Lassen, Tine

    2016-01-01

    In theory, multilingual terminology work is done by creating concept diagrams in each of the languages and comparing them to establish equivalences between concepts in the two languages. In practice, however, various terminology management systems (TMS) are used, end these systems hardly ever...

  2. Rita Temmerman. Towards New Ways of Terminology Description ...

    African Journals Online (AJOL)

    rbr

    (Louvain 1998) focused on Terminology Beyond Standardisation: Language and. Categorisation in the Life ... New Ways of Terminology Description: The Sociocognitive Approach, is to elaborate a new theory, method ... engineering, planning and standardisation, as a consequence of product standardisation, as the un-.

  3. Natural Science and Technology Terminology in the Sesotho sa ...

    African Journals Online (AJOL)

    Riette Ruthven

    this specialized terminology in the second edition of its comprehensive monolingual dictionary. The main purpose for lemmatizing the natural science and technology terminology is to give these lexical items comprehensive definitions in Sesotho sa Leboa, instead of 'a one word translation definition' as is the case in the ...

  4. Early fetal anatomical sonography.

    LENUS (Irish Health Repository)

    Donnelly, Jennifer C

    2012-10-01

    Over the past decade, prenatal screening and diagnosis has moved from the second into the first trimester, with aneuploidy screening becoming both feasible and effective. With vast improvements in ultrasound technology, sonologists can now image the fetus in greater detail at all gestational ages. In the hands of experienced sonographers, anatomic surveys between 11 and 14 weeks can be carried out with good visualisation rates of many structures. It is important to be familiar with the normal development of the embryo and fetus, and to be aware of the major anatomical landmarks whose absence or presence may be deemed normal or abnormal depending on the gestational age. Some structural abnormalities will nearly always be detected, some will never be and some are potentially detectable depending on a number of factors.

  5. Lower Urinary Tract Terminology in Daytime Lower Urinary Tract Symptoms in Children: A View of the Pediatric Urologist.

    Science.gov (United States)

    van den Heijkant, Marleen; Bogaert, Guy

    2017-04-01

    Epidemiological studies have demonstrated rates of lower urinary tract (LUT) symptoms in school-aged children as high as 20%. Symptoms of LUT may have significant social consequences. The diagnosis of LUT symptoms in children is mainly based on the subjective impression, and it is therefore important to translate the clinical impression into a structured LUT terminology. To have a view, as a pediatric urologist and a urologist, of the LUT terminology proposed by the Standardization Committee of the International Children Continence Society. In addition to the known LUT terminology conditions that are mainly functional, we propose to add specific urological malformations due to congenital or acquired urological conditions, leading to LUT symptoms. In addition to the opinion-based statements and practical clinical suggestions, we have added recent literature to support the statements and suggestions. LUT symptoms in children can be from a functional or an anatomical origin. As the diagnosis is often made on the basis of subjective and variable information, experience of the medical caretaker is also important to allow categorization of the condition of the child into a well-structured LUT terminology. Medical caretakers should be aware of possible evidence-based diagnostic tools and be able to follow guidelines and algorithms to come to the correct diagnosis and condition of the child to allow one to distinguish functional from congenital or acquired anatomical LUT conditions. Up to 20% of school-aged children can have wetting problems. Some wetting problems can be temporary, due to the young age, stress, psychological problems, or other associated problems such as bowel dysfunction. However, some wetting problems in children are due to a condition of the kidneys, bladder, or elsewhere in the urinary tract since they were born, and should be well investigated, as in most such situations the LUT problems could be treated surgically. Copyright © 2017 European

  6. Reference Man anatomical model

    Energy Technology Data Exchange (ETDEWEB)

    Cristy, M.

    1994-10-01

    The 70-kg Standard Man or Reference Man has been used in physiological models since at least the 1920s to represent adult males. It came into use in radiation protection in the late 1940s and was developed extensively during the 1950s and used by the International Commission on Radiological Protection (ICRP) in its Publication 2 in 1959. The current Reference Man for Purposes of Radiation Protection is a monumental book published in 1975 by the ICRP as ICRP Publication 23. It has a wealth of information useful for radiation dosimetry, including anatomical and physiological data, gross and elemental composition of the body and organs and tissues of the body. The anatomical data includes specified reference values for an adult male and an adult female. Other reference values are primarily for the adult male. The anatomical data include much data on fetuses and children, although reference values are not established. There is an ICRP task group currently working on revising selected parts of the Reference Man document.

  7. Perceptions of and Attitudes towards Regional Varieties of Polish: Views from Two Polish Provinces

    Science.gov (United States)

    Milobog, Magdalena; Garrett, Peter

    2011-01-01

    This paper reports a study of perceptions and attitudes relating to regional varieties of Polish. The methodology followed folk linguistic approaches to attitudes research. Respondents in two Polish provinces were asked to draw on a map of Poland where they thought the main regional varieties of Polish were spoken, and then to name and…

  8. History of Polish gastrointestinal radiology.

    Science.gov (United States)

    Urbanik, A

    2003-12-01

    As early as several days after the publication of the information concerning Roentgen's discovery the first radiological examinations were performed in Poland. The new method was immediately introduced into medical practice, including gastroenterology. In that pioneer period the most important works were those by Walery Jaworski who was the first man in the world to perform an X-ray of gall stones as well as the stomach with the use of a contrast medium. In its more-than-a-hundred-year history Polish gastrointestinal radiology has attempted not only to catch up with the world science, but it also has made a considerable contribution to its development.

  9. Corporate Politics on Polish Millennials

    OpenAIRE

    Natalia Roślik

    2017-01-01

    In the very beginning of this particular paper, an author is trying to determine and describe who Millennials actually are. Then, the basis of Millennials definition is analysing corporation’s activity over the past years regarding this age group. The main goal of the thesis is to bring their specific futures out and describe what corporations on Polish job market are doing to encourage them to work in their offices. Especially in Poland within the last years, it is observed that big multinat...

  10. Polish Foundation for Energy Efficiency

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    The Polish Foundation for Energy Efficiency (FEWE) was established in Poland at the end of 1990. FEWE, as an independent and non-profit organization, has the following objectives: to strive towards an energy efficient national economy, and to show the way and methods by use of which energy efficiency can be increased. The activity of the Foundation covers the entire territory of Poland through three regional centers: in Warsaw, Katowice and Cracow. FEWE employs well-known and experienced specialists within thermal and power engineering, civil engineering, economy and applied sciences. The organizer of the Foundation has been Battelle Memorial Institute - Pacific Northwest Laboratories from the USA.

  11. A Reinforcement-Based Learning Paradigm Increases Anatomical Learning and Retention—A Neuroeducation Study

    OpenAIRE

    Sarah J. Anderson; Kent G. Hecker; Kent G. Hecker; Olave E. Krigolson; Heather A. Jamniczky

    2018-01-01

    In anatomy education, a key hurdle to engaging in higher-level discussion in the classroom is recognizing and understanding the extensive terminology used to identify and describe anatomical structures. Given the time-limited classroom environment, seeking methods to impart this foundational knowledge to students in an efficient manner is essential. Just-in-Time Teaching (JiTT) methods incorporate pre-class exercises (typically online) meant to establish foundational knowledge in novice learn...

  12. Sexual activity of Polish adults.

    Science.gov (United States)

    Pastwa-Wojciechowska, Beata; Izdebski, Zbigniew

    2014-01-01

    The purpose of this research was to explore the subject of sexual activity in the Polish population, with special focus on age and gender differences, and sexual infidelity. Sexual activity is one of the basic factors in initiating and maintaining relationships. On the one hand, sexual activity enables us to meet natural needs and maintain an intimate relationship with another human being; on the other, it may allow us to overcome loneliness and social isolation by providing the opportunity to express feelings of closeness and unity. The research was conducted on a representative group of 3,200 Poles aged between 15-49, with the support of a well-known Polish research company - TNS OBOP. Face-to-face and Pencil and Paper (PAPI) interviews were carried out. The results focus on two main issues: the age and motives of sexual initiation among teenagers (with a significant percentage starting their sexual activity at the age of 15), and the quality of the sexual lives of adults (average number of sexual partners, sexual infidelity and sexual satisfaction). There is dependence between the type of relationship and the performance or non-performance of sexual activity, as well as the quality of the relationship. Among both adolescents and adults, remaining in a stable relationship (partnership or marriage) promotes loyalty. The performance of sexual goals turns out to be an important mechanism regulating the interpersonal aspects of a relationship, influencing their perception and evaluation.

  13. Sexual activity of Polish adults

    Directory of Open Access Journals (Sweden)

    Beata Pastwa-Wojciechowska

    2014-03-01

    Full Text Available Aim. The purpose of this research was to explore the subject of sexual activity in the Polish population, with special focus on age and gender differences, and sexual infidelity. Sexual activity is one of the basic factors in initiating and maintaining relationships. On the one hand, sexual activity enables us to meet natural needs and maintain an intimate relationship with another human being; on the other, it may allow us to overcome loneliness and social isolation by providing the opportunity to express feelings of closeness and unity. Material and method. The research was conducted on a representative group of 3,200 Poles aged between 15–49, with the support of a well-known Polish research company – TNS OBOP. Face-to-face and Pencil and Paper (PAPI interviews were carried out. Results. The results focus on two main issues: the age and motives of sexual initiation among teenagers (with a significant percentage starting their sexual activity at the age of 15, and the quality of the sexual lives of adults (average number of sexual partners, sexual infidelity and sexual satisfaction. Conclusion. There is dependence between the type of relationship and the performance or non-performance of sexual activity, as well as the quality of the relationship. Among both adolescents and adults, remaining in a stable relationship (partnership or marriage promotes loyalty. The performance of sexual goals turns out to be an important mechanism regulating the interpersonal aspects of a relationship, influencing their perception and evaluation.

  14. Buffered Electrochemical Polishing of Niobium

    Energy Technology Data Exchange (ETDEWEB)

    Ciovati, Gianluigi [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Tian, Hui [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); College of William and Mary, Williamsburg, VA (United States); Corcoran, Sean [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States)

    2011-03-01

    The standard preparation of superconducting radio-frequency (SRF) cavities made of pure niobium include the removal of a 'damaged' surface layer, by buffered chemical polishing (BCP) or electropolishing (EP), after the cavities are formed. The performance of the cavities is characterized by a sharp degradation of the quality factor when the surface magnetic field exceeds about 90 mT, a phenomenon referred to as 'Q-drop.' In cavities made of polycrystalline fine grain (ASTM 5) niobium, the Q-drop can be significantly reduced by a low-temperature (? 120 °C) 'in-situ' baking of the cavity if the chemical treatment was EP rather than BCP. As part of the effort to understand this phenomenon, we investigated the effect of introducing a polarization potential during buffered chemical polishing, creating a process which is between the standard BCP and EP. While preliminary results on the application of this process to Nb cavities have been previously reported, in this contribution we focus on the characterization of this novel electrochemical process by measuring polarization curves, etching rates, surface finish, electrochemical impedance and the effects of temperature and electrolyte composition. In particular, it is shown that the anodic potential of Nb during BCP reduces the etching rate and improves the surface finish.

  15. Network of anatomical texts (NAnaTex), an open-source project for visualizing the interaction between anatomical terms.

    Science.gov (United States)

    Momota, Ryusuke; Ohtsuka, Aiji

    2018-01-01

    Anatomy is the science and art of understanding the structure of the body and its components in relation to the functions of the whole-body system. Medicine is based on a deep understanding of anatomy, but quite a few introductory-level learners are overwhelmed by the sheer amount of anatomical terminology that must be understood, so they regard anatomy as a dull and dense subject. To help them learn anatomical terms in a more contextual way, we started a new open-source project, the Network of Anatomical Texts (NAnaTex), which visualizes relationships of body components by integrating text-based anatomical information using Cytoscape, a network visualization software platform. Here, we present a network of bones and muscles produced from literature descriptions. As this network is primarily text-based and does not require any programming knowledge, it is easy to implement new functions or provide extra information by making changes to the original text files. To facilitate collaborations, we deposited the source code files for the network into the GitHub repository ( https://github.com/ryusukemomota/nanatex ) so that anybody can participate in the evolution of the network and use it for their own non-profit purposes. This project should help not only introductory-level learners but also professional medical practitioners, who could use it as a quick reference.

  16. Method of polishing nickel-base alloys and stainless steels

    Science.gov (United States)

    Steeves, Arthur F.; Buono, Donald P.

    1981-01-01

    A chemical attack polish and polishing procedure for use on metal surfaces such as nickel base alloys and stainless steels. The chemical attack polish comprises Fe(NO.sub.3).sub.3, concentrated CH.sub.3 COOH, concentrated H.sub.2 SO.sub.4 and H.sub.2 O. The polishing procedure includes saturating a polishing cloth with the chemical attack polish and submicron abrasive particles and buffing the metal surface.

  17. The Science and Politics of Naming: Reforming Anatomical Nomenclature, ca. 1886-1955.

    Science.gov (United States)

    Buklijas, Tatjana

    2017-04-01

    Anatomical nomenclature is medicine's official language. Early in their medical studies, students are expected to memorize not only the bodily geography but also the names for all the structures that, by consensus, constitute the anatomical body. The making and uses of visual maps of the body have received considerable historiographical attention, yet the history of production, communication, and reception of anatomical names-a history as long as the history of anatomy itself-has been studied far less. My essay examines the reforms of anatomical naming between the first modern nomenclature, the 1895 Basel Nomina Anatomica (BNA), and the 1955 Nomina Anatomica Parisiensia (NAP, also known as PNA), which is the basis for current anatomical terminology. I focus on the controversial and ultimately failed attempt to reform anatomical nomenclature, known as Jena Nomina Anatomica (INA), of 1935. Discussions around nomenclature reveal not only how anatomical names are made and communicated, but also the relationship of anatomy with the clinic; disciplinary controversies within anatomy; national traditions in science; and the interplay between international and scientific disciplinary politics. I show how the current anatomical nomenclature, a successor to the NAP, is an outcome of both political and disciplinary tensions that reached their peak before 1945. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  18. Anatomical imaging for radiotherapy

    International Nuclear Information System (INIS)

    Evans, Philip M

    2008-01-01

    The goal of radiation therapy is to achieve maximal therapeutic benefit expressed in terms of a high probability of local control of disease with minimal side effects. Physically this often equates to the delivery of a high dose of radiation to the tumour or target region whilst maintaining an acceptably low dose to other tissues, particularly those adjacent to the target. Techniques such as intensity modulated radiotherapy (IMRT), stereotactic radiosurgery and computer planned brachytherapy provide the means to calculate the radiation dose delivery to achieve the desired dose distribution. Imaging is an essential tool in all state of the art planning and delivery techniques: (i) to enable planning of the desired treatment, (ii) to verify the treatment is delivered as planned and (iii) to follow-up treatment outcome to monitor that the treatment has had the desired effect. Clinical imaging techniques can be loosely classified into anatomic methods which measure the basic physical characteristics of tissue such as their density and biological imaging techniques which measure functional characteristics such as metabolism. In this review we consider anatomical imaging techniques. Biological imaging is considered in another article. Anatomical imaging is generally used for goals (i) and (ii) above. Computed tomography (CT) has been the mainstay of anatomical treatment planning for many years, enabling some delineation of soft tissue as well as radiation attenuation estimation for dose prediction. Magnetic resonance imaging is fast becoming widespread alongside CT, enabling superior soft-tissue visualization. Traditionally scanning for treatment planning has relied on the use of a single snapshot scan. Recent years have seen the development of techniques such as 4D CT and adaptive radiotherapy (ART). In 4D CT raw data are encoded with phase information and reconstructed to yield a set of scans detailing motion through the breathing, or cardiac, cycle. In ART a set of

  19. Advanced techniques for computer-controlled polishing

    Science.gov (United States)

    Schinhaerl, Markus; Stamp, Richard; Pitschke, Elmar; Rascher, Rolf; Smith, Lyndon; Smith, Gordon; Geiss, Andreas; Sperber, Peter

    2008-08-01

    Computer-controlled polishing has introduced determinism into the finishing of high-quality surfaces, for example those used as optical interfaces. Computer-controlled polishing may overcome many of the disadvantages of traditional polishing techniques. The polishing procedure is computed in terms of the surface error-profile and the material removal characteristic of the polishing tool, the influence function. Determinism and predictability not only enable more economical manufacture but also facilitate considerably increased processing accuracy. However, there are several disadvantages that serve to limit the capabilities of computer-controlled polishing, many of these are considered to be issues associated with determination of the influence function. Magnetorheological finishing has been investigated and various new techniques and approaches that dramatically enhance the potential as well as the economics of computer-controlled polishing have been developed and verified experimentally. Recent developments and advancements in computer-controlled polishing are discussed. The generic results of this research may be used in a wide variety of alternative applications in which controlled material removal is employed to achieve a desired surface specification, ranging from surface treatment processes in technical disciplines, to manipulation of biological surface textures in medical technologies.

  20. Polish Industry and Art at CERN

    CERN Multimedia

    2000-01-01

    On 17 October 2000 the second Polish industrial and technological exhibition opened at CERN. The first one was held five years ago and nine of the companies that were present then have come back again this year. Six of those companies were awarded contracts with CERN in 1995. Three Polish officials were present at the Opening Ceremony today: Mrs Malgorzata Kozlowska, Under-secretary of State in the State Committee for Scientific Research, Mr Henryk Ogryczak, Under-secretary of State in Ministry of Economy and Prof. Jerzy Niewodniczanski, President of National Atomic Energy Agency. Professor Luciano Maiani welcomed the Polish delegation to CERN and stressed the important contribution of Polish scientists and industrialists to the work of the laboratory. Director General Luciano Maiani (back left) and head of SPL division Karl-Heinz Kissler (back right) visit the Poland at CERN exhibition… The exhibition offers Polish companies the opportunity to establish professional contacts with CERN. Nineteen companies...

  1. Kyo Kageura. The Dynamics of Terminology: A Descriptive Theory of Term Formation and Terminological Growth.

    Directory of Open Access Journals (Sweden)

    Rosemarie Gläser

    2011-10-01

    Full Text Available This monograph was issued as Volume 5 in the series Terminology and Lexicography Research and Practice, edited by Marie-Claude L'Homme and Ulrich Heid and assisted by Juan C. Sager as Consulting Editor. The Japanese author, Kyo Kageura, does research work at the National Institute of Informatics in Tokyo. His theoretical background and methodological experience in term formation patterns and processes were influenced by intensive cooperation with European terminologists since the 1990s, notably the British linguists Juan C. Sager (Manchester, UMIST and Yorick Wilks (Sheffield, and R. Harald Baayan in the Netherlands.

  2. Phytotherapy of Polish migrants in Misiones, Argentina: legacy and acquired plant species.

    Science.gov (United States)

    Kujawska, Monika; Hilgert, Norma I

    2014-05-14

    Analyzing how and why phytotherapeutical practices survive a migratory process is important for understanding migrant health seeking behaviour and health demand. Contrary to most studies, which focus on migrants from warm climates who settle in European and American cities, this study explores continuations in the herbal pharmacopoeia of Eastern European peasants who settled down in rural subtropical areas of Argentina. The study also explores the pharmacopoeia among the descendants of the first generation born in Argentina. Primary and secondary sources were employed in the study. Data were collected during over 200 interviews (semi-structured, free lists and in-depth) with 94 study participants. Voucher specimens of species mentioned were gathered and identified. Illnesses were reported according to local ethnomedical terminology and classification. Only reports from informants' own experience were included in the analysis. The unit of analysis was a plant use report (plant species × plant part × ailment × informant). The frequency of mentions was calculated for plant parts used and modes of preparation and administration of herbal medicines, and the Informant Diversity Value was also estimated. Secondary information was obtained from ethnobotanical and ethnomedical literature concerning the whole of Poland. A list was made of medicinal plant species known from Poland available in the study area. Then, the similarity between the available species and those used by Polish migrants was evaluated by applying the Simpson index. An exhaustive list of 129 plant species used by the Polish community in Misiones, Argentina, was obtained. Among 37 species known form Poland and available in Misiones, 19 were used by the community. There was low consensus on the treatment of health conditions with legacy plants between Polish migrants and the Polish folk pharmacopoeia. The reasons for the relatively low use of legacy species are explained. More continuation has been

  3. Corporate Politics on Polish Millennials

    Directory of Open Access Journals (Sweden)

    Natalia Roślik

    2017-12-01

    Full Text Available In the very beginning of this particular paper, an author is trying to determine and describe who Millennials actually are. Then, the basis of Millennials definition is analysing corporation’s activity over the past years regarding this age group. The main goal of the thesis is to bring their specific futures out and describe what corporations on Polish job market are doing to encourage them to work in their offices. Especially in Poland within the last years, it is observed that big multinational companies are paying special attention to Millennials and trying to hire them before competitors will do so. As a part of this paper, an author will describe corporate politics and practices on Thomson Reuters and BNY Mellon examples. Within this work, an author is also discussing key features and differences between this generation and Millennials parent’s generation. Additionally, there is a reference to corporate social responsibility concept and work-life balance issues.

  4. Terminology Modeling for an Enterprise Laboratory Orders Catalog

    Science.gov (United States)

    Zhou, Li; Goldberg, Howard; Pabbathi, Deepika; Wright, Adam; Goldman, Debora S.; Van Putten, Cheryl; Barley, Amanda; Rocha, Roberto A.

    2009-01-01

    Laboratory test orders are used in a variety of clinical information systems at Partners HealthCare. At present, each site at Partners manages its own set of laboratory orders with locally defined codes. Our current plan is to implement an enterprise catalog, where laboratory test orders are mapped to reference terminologies and codes from different sites are mapped to each other. This paper describes the terminology modeling effort that preceded the implementation of the enterprise laboratory orders catalog. In particular, we present our experience in adapting HL7’s “Common Terminology Services 2 – Upper Level Class Model” as a terminology metamodel for guiding the development of fully specified laboratory orders and related services. PMID:20351950

  5. Terminology: A necessary tool for the Specialized Translator

    Directory of Open Access Journals (Sweden)

    Aura E. Navarro

    2016-03-01

    Full Text Available Language disciplines, including Terminology and Specialized Translation, have made great strides after the second half of the twentieth century. This development, related to technological growth and international communication that occurred during this period, has resulted in a considerable increase of concepts. Thus, experts have become more and more aware of the importance of naming these new concepts. Specialized translators were among the first language professionals to recognize the need of mastering the terminology of specialized fields in order to perform their duties well (Antia et coll., 2005. In this work, we study the very close relationship between Terminology and Specialized Translation. We also study the theoretical and practical knowledge of Terminology that a specialized translator should have.

  6. A general method for sifting linguistic knowledge from structured terminologies.

    Science.gov (United States)

    Grabar, N; Zweigenbaum, P

    2000-01-01

    Morphological knowledge is useful for medical language processing, information retrieval and terminology or ontology development. We show how a large volume of morphological associations between words can be learnt from existing medical terminologies by taking advantage of the semantic relations already encoded between terms in these terminologies: synonymy, hierarchy and transversal relations. The method proposed relies on no a priori linguistic knowledge. Since it can work with different relations between terms, it can be applied to any structured terminology. Tested on SNOMED and ICD in French and English, it proves to identify fairly reliable morphological relations (precision > 90%) with a good coverage (over 88% compared to the UMLS lexical variant generation program). For English words with a stem longer than 3 characters, recall reaches 98.8% for inflection and 94.7% for derivation.

  7. EFSA Scientific Committee; Scientific Opinion on Risk Assessment Terminology

    DEFF Research Database (Denmark)

    Hald, Tine

    of risk assessment terminology and identified their relevance for EFSA to adopt more harmonised use. These included examining definitions of risk and uncertainty, expressing uncertainty and different levels of risk, the merits of using qualitative and quantitative expressions and the use of glossaries......The Scientific Committee of the European Food Safety Authority (EFSA) reviewed the use of risk assessment terminology within its Scientific Panels. An external report, commissioned by EFSA, analysed 219 opinions published by the Scientific Committee and Panels to recommend possible ways...... of improving the expression and communication of risk and/or uncertainties in the selected opinions. The Scientific Committee concluded that risk assessment terminology is not fully harmonised within EFSA. In part this is caused by sectoral legislation defining specific terminology and international standards...

  8. Anglicisme et emprunt terminologique (Anglicism and Terminological Borrowing).

    Science.gov (United States)

    Lerat, Pierre

    1984-01-01

    Linguistic science offers some insights into the phenomenon of the borrowing of words, concepts, and connotations, particularly scientific terminology, from British and American English, showing the complexity of the problem and allowing measurement of the social and scientific implications. (MSE)

  9. Smoking characteristics of Polish immigrants in Dublin

    Directory of Open Access Journals (Sweden)

    Zatonski Witold

    2008-12-01

    Full Text Available Abstract Background This study examined two main hypotheses: a Polish immigrants' smoking estimates are greater than their Irish counterparts (b Polish immigrants purchasing cigarettes from Poland smoke "heavier" (≥ 20 cigarettes a day when compared to those purchasing cigarettes from Ireland. The study also set out to identify significant predictors of 'current' smoking (some days and everyday among the Polish immigrants. Methods Dublin residents of Polish origin (n = 1,545 completed a previously validated Polish questionnaire in response to an advertisement in a local Polish lifestyle magazine over 5 weekends (July–August, 2007. The Office of Tobacco Control telephone-based monthly survey data were analyzed for the Irish population in Dublin for the same period (n = 484. Results Age-sex adjusted smoking estimates were: 47.6% (95% Confidence Interval [CI]: 47.3%; 48.0% among the Poles and 27.8% (95% CI: 27.2%; 28.4% among the general Irish population (p 24 months were significant predictors of current smoking among the Poles. An objective validation of the self-reported smoking history of a randomly selected sub-sample immigrant group, using expired carbon monoxide (CO measurements, showed a highly significant correlation coefficient (r = 0.64 of expired CO levels with the reported number of cigarettes consumed (p Conclusion Polish immigrants' smoking estimates are higher than their Irish counterparts, and particularly if employed, with only primary-level education, and are overseas >2 years.

  10. Comments on the Terminology of "Convectively-Coupled Kelvin Waves"

    Science.gov (United States)

    Chao, Winston C.

    2006-01-01

    The terminology "convectively-coupled Kelvin waves" has been used frequently in the literature to refer to the 15 m/s eastward-moving planetary and large-scale waves in the tropics. This note points out that this terminology is not appropriate, since these waves contain Rossby waves and mixed Rossby-gravity waves also. The significance of pointing out this misnomer is that a better understanding of these waves may contribute to the search for their cause.

  11. Super-polishing of Zerodur aspheres by means of conventional polishing technology

    Science.gov (United States)

    Polak, Jaroslav; Klepetková, Eva; Pošmourný, Josef; Šulc, Miroslav; Procháska, František; Tomka, David; Matoušek, Ondřej; Poláková, Ivana; Šubert, Eduard

    2015-01-01

    This paper describes a quest to find simple technique to superpolish Zerodur asphere (55μm departure from best fit sphere) that could be employed on old fashion way 1-excenter optical polishing machine. The work focuses on selection of polishing technology, study of different polishing slurries and optimization of polishing setup. It is demonstrated that either by use of fine colloidal CeO2 slurry or by use of bowl-feed polishing setup with CeO2 charged pitch we could reach 0.4nm RMS roughness while removing <30nm of surface layer. This technique, although not optimized, was successfully used to improve surface roughness on already prepolished Zerodur aspheres without necessity to involve sophisticated super-polishing technology and highly trained manpower.

  12. Comparative study of performance of shoe polishes formulated from ...

    African Journals Online (AJOL)

    GARZALI

    This should make the polish remains as discrete solid particles held mechanically within the leather. This work intends to explore the use of polyethylene pigment in the production of shoe polish. The shoe polish produced will be applied alongside shoe polish from carbon black (CI black Pigment 7) on finished black leather ...

  13. Linked Heritage: a collaborative terminology management platform for a network of multilingual thesauri and controlled vocabularies

    Directory of Open Access Journals (Sweden)

    Marie-Veronique Leroi

    2013-01-01

    Full Text Available Terminology and multilingualism have been one of the main focuses of the Athena Project. Linked Heritage as a legacy of this project also deals with terminology and bring theory to practice applying the recommendations given in the Athena Project. Linked Heritage as a direct follow-up of these recommendations on terminology and multilingualism is currently working on the development of a Terminology Management Platform (TMP. This platform will allow any cultural institution to register, SKOSify and manage its terminology in a collaborative way. This Terminology Management Platform will provide a network of multilingual and cross-domain terminologies.

  14. Standards of the Polish Ultrasound Society – update. Sonomammography examination

    Directory of Open Access Journals (Sweden)

    Wiesław Jakubowski

    2012-09-01

    Full Text Available The use of BIRADS classification has been recommended in sonomammography exami‑ nations in Poland since the year 2010. It was developed by the Polish Ultrasound Society and published in Ultrasound Examinations Standards of the Polish Ultrasound Society. Standards, based on BIRADS-usg classification, introduced uniformity in breast ultra‑ sound examination descriptions and in the terminology of pathological lesions in breasts. BIRADS-usg classification takes into account breast morphological structure elements and pathological focal lesions in them. It enables the distinction between benign lesions and lesions suspected of being malignant. It contains information on the malignancy risk of focal lesions and proposals of diagnostic-therapeutic algorithms (including biopsy in relation to lesions of different character. The Polish Ultrasound Society recommends performing prophylactic sonomammography examinations every 12 months in women over the age of 30 because of the increasing breast cancer morbidity in women from all age groups. In this article a spectrum of focal changes in breasts are presented within the relevant BIRADS-usg classification categories. The features of ultrasound morphol‑ ogy, enabling them to be classified to particular categories of BIRADS-usg classification are discussed. Management algorithms which may help clinicians to diagnose breast cancer and to treat it are proposed. Elements of medical history, physical examination, recommended techniques of sonomammography examination performance, technical parameters of ultrasound machine and examination description standards are presented. This article was prepared based on the Ultrasound Examination Standards of the Polish Ultrasound Society which was published in 2011 and updated. It contains numerous pic‑ tures visualizing BIRADS-usg classification.

  15. New Environmental Practices in Polish Production Firms

    DEFF Research Database (Denmark)

    Kræmer, Trine Pipi

    2002-01-01

    Based on five case studies in Poland, the paper discusses, how a specific environmental policy influences the firms? industrial environmental practices. The study illustrates, how the Polish environmental policy, dominated by environmental charges on emissions, is extremely effective in improving...

  16. Electro Polishing of Niobium Cavities at DESY

    CERN Document Server

    Matheisen, A; Morales, H; Petersen, B; Schmoekel, M; Steinhau-Kühl, N

    2004-01-01

    At DESY a facility for electro polishing (EP) of the super conducting (s.c.) TESLA/TTF cavities have been built and is operational since summer 2003. The EP infrastructure is capable to handle single-cell structures and the standard TESLA/ TTF nine-cell cavities. Several electro polishing processes have been made since and acceleration voltage up to 40 MV/m have been reached in nine cell structures. We report on measurements and experiences gained since 2003 as well as on handling procedures developed for the preparation of electro polished resonators. Specific data like heat production, variation of current density and bath aging will be presented. Another important point for reproducible results is the quality control of the electro polishing process. First quality control steps to be implanted in the EP procedure for large-scale production will be described.

  17. Semiological analysis of Polish theater posters

    Directory of Open Access Journals (Sweden)

    Jelena Nikolić

    2016-02-01

    Full Text Available Through the application of semiological analysis to theater posters made by two Polish authors, the paper uncovers signs, meanings, codes and specifics of the „Polish school of poster-making“ and contemporary Polish posters. Aside from this, I suggest a methodological framework for studying the issue of coding and shaping a theater poster as a culturally specific form of visual communication. The aesthetic and semiotic outlook of the Polish theater posters which were chosen is analyzed using the semiological method which highlights their differences and similarities. By pointing out the system of codes through the examples given here, a graphic designer is informed about the existence and the possibilities of a more systematic approach to shaping a theater poster.

  18. Report on Polish Public Libraries 2001

    OpenAIRE

    Bednarek-Michalska, Bożena; Szatkowska, Olga

    2001-01-01

    Report is an overview of polish public libraries, services to a variety of communities, it also provides statistics, n explanation of the funding policy for public libraries in Poland and information about the governance of public libraries in the country.

  19. Electrolytic polishing system for space age materials

    International Nuclear Information System (INIS)

    Coons, W.C.; Iosty, L.R.

    1976-01-01

    A simple electrolytic polishing technique was developed for preparing Cr, Co, Hf, Mo, Ni, Re, Ti, V, Zr, and their alloys for structural analysis on the optical microscope. The base electrolyte contains 5g ZnCl 2 and 15g AlCl 3 . 6H 2 O in 200 ml methyl alcohol, plus an amount of H 2 SO 4 depending on the metal being polished. Five etchants are listed

  20. Trace element analysis of nail polishes

    International Nuclear Information System (INIS)

    Misra, G.; Mittal, V.K.; Sahota, H.S.

    1999-01-01

    Instrumental neutron activation analysis (INAA) technique was used to measure the concentrations of various trace elements in nail polishes of popular Indian and foreign brands. The aim of the present experiment was to see whether trace elements could distinguish nail polishes of different Indian and foreign brands from forensic point of view. It was found that cesium can act as a marker to differentiate foreign and Indian brands. (author)

  1. Interlocking directorships in Polish joint stock companies:

    OpenAIRE

    Pawlak, Marek

    2008-01-01

    Studies concerning interlocking directorships have been carried out among Polish joint stock corporations. The main source of data have been the announcements that are to be published by corporations regularly in a journal called Business and Court Gazette (BCG). Interlocking directorships constitute a network among corporations the use of which enables co-ordinated management of the whole group. The phenomenon of interlocking directorships in Polish joint stock companies can be compared to t...

  2. Jewish problem in the Polish Communist Party

    Directory of Open Access Journals (Sweden)

    Cimek Henryk

    2016-12-01

    Full Text Available Jews accounted for approx. 8-10% of the population of the Second Republic and in the communist movement (Polish Communist Party and Polish Communist Youth Union the rate was approx, 30%, while in subsequent years it much fluctuated. The percentage of Jews was the highest in the authorities of the party and in the KZMP. This had a negative impact on the position of the KPP on many issues, especially in its relation to the Second Republic.

  3. Attack polish for nickel-base alloys and stainless steels

    Science.gov (United States)

    Not Available

    1980-05-28

    A chemical attack polish and polishing procedure for use on metal surfaces such as nickel base alloys and stainless steels is described. The chemical attack polich comprises FeNO/sub 3/, concentrated CH/sub 3/COOH, concentrated H/sub 2/SO/sub 4/ and H/sub 2/O. The polishing procedure includes saturating a polishing cloth with the chemical attack polish and submicron abrasive particles and buffing the metal surface.

  4. Experimental Polish-Lithuanian Corpus with the Semantic Annotation Elements

    Directory of Open Access Journals (Sweden)

    Danuta Roszko

    2015-06-01

    Full Text Available Experimental Polish-Lithuanian Corpus with the Semantic Annotation Elements In the article the authors present the experimental Polish-Lithuanian corpus (ECorpPL-LT formed for the idea of Polish-Lithuanian theoretical contrastive studies, a Polish-Lithuanian electronic dictionary, and as help for a sworn translator. The semantic annotation being brought into ECorpPL-LT is extremely useful in Polish-Lithuanian contrastive studies, and also proves helpful in translation work.

  5. Conformal polishing approach: Tool footprint analysis

    Directory of Open Access Journals (Sweden)

    José A Dieste

    2016-02-01

    Full Text Available Polishing process is one of the most critical manufacturing processes during a metal part production because it determines the final quality of the product. Free-form surface polishing is a handmade process with lots of rejected parts, scrap generation and time and energy consumption. Two different research lines are being developed: prediction models of the final surface quality parameters and an analysis of the amount of material removed depending on the polishing parameters to predict the tool footprint during the polishing task. This research lays the foundations for a future automatic conformal polishing system. It is based on rotational and translational tool with dry abrasive in the front mounted at the end of a robot. A tool to part concept is used, useful for large or heavy workpieces. Results are applied on different curved parts typically used in tooling industry, aeronautics or automotive. A mathematical model has been developed to predict the amount of material removed in function of polishing parameters. Model has been fitted for different abrasives and raw materials. Results have shown deviations under 20% that implies a reliable and controllable process. Smaller amount of material can be removed in controlled areas of a three-dimensional workpiece.

  6. Laser polishing of additive manufactured Ti alloys

    Science.gov (United States)

    Ma, C. P.; Guan, Y. C.; Zhou, W.

    2017-06-01

    Laser-based additive manufacturing has attracted much attention as a promising 3D printing method for metallic components in recent years. However, surface roughness of additive manufactured components has been considered as a challenge to achieve high performance. In this work, we demonstrate the capability of fiber laser in polishing rough surface of additive manufactured Ti-based alloys as Ti-6Al-4V and TC11. Both as-received surface and laser-polished surfaces as well as cross-section subsurfaces were analyzed carefully by White-Light Interference, Confocal Microscope, Focus Ion Beam, Scanning Electron Microscopy, Energy Dispersive Spectrometer, and X-ray Diffraction. Results revealed that as-received Ti-based alloys with surface roughness more than 5 μm could be reduce to less than 1 μm through laser polishing process. Moreover, microstructure, microhardness and wear resistance of laser-polished zone was investigated in order to examine the thermal effect of laser polishing processing on the substrate of additive manufactured Ti alloys. This proof-of-concept process has the potential to effectively improve the surface roughness of additive manufactured metallic alloy by local polishing method without damage to the substrate.

  7. Interculutral Polish-Chinese QQing

    Directory of Open Access Journals (Sweden)

    Elżbieta Gajek

    2012-12-01

    Full Text Available Working in tandem with the use of information and communication technologies is well-known and frequently used as a method of supporting learning of foreign languages in authentic communication. It is based on a constructivist approach to teaching. In the reported case study Polish and Chinese students discussed in English preprepared topics. The work shows the potential of e-learning at the micro level, as the language and intercultural task is implemented into an academic course without modification of the objectives and learning outcomes of the course. Evaluation carried out at the end of the project indicates that both groups perceived the task as a significant linguistic, cultural and personal experience. They stressed the importance of sharing “culture for culture” as the partner culture was new for most of them. The ability to talk and respond to information which was often strange, from the point of view of their own culture, allowed for learning intercultural competence ̔in action’.

  8. Terminology in South Africa Terminologie in Suid-Afrika

    Directory of Open Access Journals (Sweden)

    Mariëtta Alberts

    2012-09-01

    Full Text Available

    This article deals with terminology and terminography in South Africa. It gives the different meanings attached to the term terminology and describes points of difference between terminology and terminography. It focuses on the dimensions of terminology, namely the cognitive, linguistic and communicative dimension. Since terminologists need to consult with subject specialists, linguists, language users and mother-tongue speakers during different phases of the terminography process, the role of consultation in terminology work is stressed. Various aspects such as cultural differences that need to be taken care of, are discussed. The current South African terminology and terminography situation regarding terminology work undertaken by the National Language Service is examined. Emphasis is placed on the database system being used and the National Termbank. Terminology training also receives attention.

    Keywords: terminology, terminography, terminologist, terminographer, cognitive dimension, linguistic dimension, communicative dimension, technical dictionary, subject specialist, subject field, subject-oriented, concept-oriented, language-oriented, standardisation, primary term formation, secondary term formation, loan words, borrowing, transliteration, neologism, extension of meaning, total embedding, transference

     

    Hierdie artikel handel oor terminologie en terminografie in Suid-Afrika. Dit verskaf die verskillende betekenisse wat aan die term terminologie geheg word en beskryf punte van verskil tussen terminologie en terminografie. Daar word gefokus op die dimensies van terminologie, naamlik die kognitiewe dimensie, die taaldimensie en die kommunikatiewe dimensie. Aangesien terminoloë vakspesialiste, linguiste, taalgebruikers en moedertaalsprekers gedurende verskillende fases van terminologiewerk moet raadpleeg, word die rol van konsultasie in terminologiewerk beklemtoon. Verskeie aspekte waaraan aandag gegee

  9. Anatomical adaptations of aquatic mammals.

    Science.gov (United States)

    Reidenberg, Joy S

    2007-06-01

    This special issue of the Anatomical Record explores many of the anatomical adaptations exhibited by aquatic mammals that enable life in the water. Anatomical observations on a range of fossil and living marine and freshwater mammals are presented, including sirenians (manatees and dugongs), cetaceans (both baleen whales and toothed whales, including dolphins and porpoises), pinnipeds (seals, sea lions, and walruses), the sea otter, and the pygmy hippopotamus. A range of anatomical systems are covered in this issue, including the external form (integument, tail shape), nervous system (eye, ear, brain), musculoskeletal systems (cranium, mandible, hyoid, vertebral column, flipper/forelimb), digestive tract (teeth/tusks/baleen, tongue, stomach), and respiratory tract (larynx). Emphasis is placed on exploring anatomical function in the context of aquatic life. The following topics are addressed: evolution, sound production, sound reception, feeding, locomotion, buoyancy control, thermoregulation, cognition, and behavior. A variety of approaches and techniques are used to examine and characterize these adaptations, ranging from dissection, to histology, to electron microscopy, to two-dimensional (2D) and 3D computerized tomography, to experimental field tests of function. The articles in this issue are a blend of literature review and new, hypothesis-driven anatomical research, which highlight the special nature of anatomical form and function in aquatic mammals that enables their exquisite adaptation for life in such a challenging environment. 2007 Wiley-Liss, Inc.

  10. Notions and Concepts in Family Law. Discrepancy Between Polish Family Law and Social Reality

    Directory of Open Access Journals (Sweden)

    Bagan-Kurluta Katarzyna

    2017-03-01

    Full Text Available Modern times are an arena for two opposing trends: the liberalization of mores and laws, and the distancing of changes and adoption of a conservative position against those that occur. Polish family law clearly fails to keep pace with the changes taking place and does not perceive new phenomena. Is this an intentional act of the legislator leading to the preservation of traditional values, or the expression of disapproval and belief in the transitoriness of new phenomena? It comes together with the introduction of new terminology or new interpretations of already existing concepts. Hence the meaning of some of the current concepts in everyday language differs significantly from their meaning arising from legal instruments. The article is an attempt to deal with this problem.

  11. Polishing for glass ceramics: which protocol?

    Science.gov (United States)

    Silva, Tânia Mara da; Salvia, Ana Carolina Rodrigues Danzi; Carvalho, Rodrigo Furtado de; Pagani, Clovis; Rocha, Daniel Maranha da; Silva, Eduardo Galera da

    2014-07-01

    The execution of adjustments on ceramic restorations is sometimes necessary for either correction of occlusion and/or inadequate contours or esthetical improvements. Clinically, the surfaces undergo weariness through fine grinding diamond burs which remove the superficial glazing layer. Several materials for ceramic polishing have been used in an attempt to reach a satisfactory surface smoothness. The aim of this study was to perform a literature review on different polishing protocols of several dental ceramics. This is a literature review performed through scientific articles published between 2004 and 2012, indexed in MEDLINE, PubMed and Scielo databases. The study selected and analyzed a total of 20 relevant articles that evaluated different types of ceramics, polishing treatment and surface roughness. After an extensive literature review, this study observed: 1 - after the rupture of the glazing layer due to the adjustments of the restorations, the best choice for the polishing of the surface will depend on the type of ceramics used; 2 - glazing procedure provide excellent results regarding to the superficial smoothness; however, if reglazing is impossible, either abrasive rubber cups/points or sandpaper discs followed by the use of diamond polishing pastes results in a satisfactory superficial smoothness; 3 - clinical studies that take into account the behavior of the protocols polishing are scarce and should be encouraged; 4 - the large number of variables influence the final outcome of polishing should be considered. The necessity in standardization of methodologies to enable a comparison among researches. Copyright © 2014 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  12. Smoking characteristics of Polish immigrants in Dublin.

    LENUS (Irish Health Repository)

    Kabir, Zubair

    2008-01-01

    BACKGROUND: This study examined two main hypotheses: a) Polish immigrants\\' smoking estimates are greater than their Irish counterparts (b) Polish immigrants purchasing cigarettes from Poland smoke "heavier" (>\\/= 20 cigarettes a day) when compared to those purchasing cigarettes from Ireland. The study also set out to identify significant predictors of \\'current\\' smoking (some days and everyday) among the Polish immigrants. METHODS: Dublin residents of Polish origin (n = 1,545) completed a previously validated Polish questionnaire in response to an advertisement in a local Polish lifestyle magazine over 5 weekends (July-August, 2007). The Office of Tobacco Control telephone-based monthly survey data were analyzed for the Irish population in Dublin for the same period (n = 484). RESULTS: Age-sex adjusted smoking estimates were: 47.6% (95% Confidence Interval [CI]: 47.3%; 48.0%) among the Poles and 27.8% (95% CI: 27.2%; 28.4%) among the general Irish population (p < 0.001). Of the 57% of smokers (n = 345\\/606) who purchased cigarettes solely from Poland and the 33% (n = 198\\/606) who purchased only from Ireland, 42.6% (n = 147\\/345) and 41.4% (n = 82\\/198) were "heavy" smokers, respectively (p = 0.79). Employment (Odds Ratio [OR]: 2.89; 95% CI: 1.25-6.69), lower education (OR: 3.76; 95%CI: 2.46-5.74), and a longer stay in Ireland (>24 months) were significant predictors of current smoking among the Poles. An objective validation of the self-reported smoking history of a randomly selected sub-sample immigrant group, using expired carbon monoxide (CO) measurements, showed a highly significant correlation coefficient (r = 0.64) of expired CO levels with the reported number of cigarettes consumed (p < 0.0001). CONCLUSION: Polish immigrants\\' smoking estimates are higher than their Irish counterparts, and particularly if employed, with only primary-level education, and are overseas >2 years.

  13. [Presence and characteristics of nursing terminology in Wikipedia].

    Science.gov (United States)

    Sanz-Lorente, María; Guardiola-Wanden-Berghe, Rocío; Wanden-Berghe, Carmina; Sanz-Valero, Javier

    2013-10-01

    To determine the presence and consultations with nurse terminology in the Spanish edition of Wikipedia, and to analyze the differences with the English edition. We confirmed the existence of terminology via the Internet by the access to the Spanish and English editions of Wikipedia. We calculated the study sample (n = 386) from the 1840 nursery terms. 337 were found in the Spanish edition and 350 in the English. We found significant differences between the two editions (p < 0.001). Also differences were winched on to the number of references in terms (p < 0.001). However, there were not differences in the update/obsolescence of information, neither in the number of queries. The entries (articles) on nursing terminology in the Spanish edition of Wikipedia, has not yet reached an optimum level. Differences between Spanish and English editions of Wikipedia are more related to term existence than adequacy of information.

  14. Benign anatomical mistakes: the correct anatomical term for the recurrent laryngeal nerve.

    Science.gov (United States)

    Mirilas, Petros; Skandalakis, John E

    2002-01-01

    The term recurrent laryngeal nerve has been adopted by Nomina Anatomica (1989) and Terminologia Anatomica (1998) to describe this vagus branch from its origin, its turn dorsally around the subclavian artery and the aortic arch, and its cranial pathway until it reaches its terminal organs in the neck. However, there is still much confusion, and either the terms inferior and recurrent laryngeal nerve are used interchangeably or inferior laryngeal nerve is considered the terminal branch of the recurrent laryngeal nerve. We hereby feel that it is necessary to reassess the term and we propose the term inferior laryngeal nerve for the entire nerve under consideration, from its origin from the vagus nerve to its destinations, including tracheal, esophageal, and pharyngeal branches. If the term superior laryngeal nerve is a given, standard and accepted term in the anatomical terminology, then logically the term inferior laryngeal nerve should also be accepted, as opposed to it. Of course the upward travel of the inferior laryngeal nerve is "recurrent". When nonrecurrence is encountered together with an arteria lusoria, a retroesophageal right subclavian artery or a right aortic arch, we consider that the term nonrecurrent inferior laryngeal nerve should be used to describe the deviation from the normal.

  15. [On the anatomical terms used for description of brain arteries and discrepancy between them and anatomical nomenclature].

    Science.gov (United States)

    Vavilov, V N; Kosourov, A K

    2004-01-01

    The following terms are used in Russian literature to designate arteries, which carry blood into the brain: brachiocephalic arteries, aortic arch branches, main cerebral arteries (arteries of the head), extra- and intracranial cerebral arteries, precerebral arteries. All terms either have substantial drawbacks or conflict with the adopted anatomical terminology. These discrepancies become far more significant in view of publication of "Terminologia Anatomica" (New York, 1998). We suggest to discuss the possibility to use universal terminology for the designation of the system of the arteries, supplying the brain. We propose to designate truncus brachiocephalicus, common carotid and subclavian arteries, internal carotid and vertebral arteries with their branches including arterial network on the brain surface by the term "the conducting arteries", whereas small branches, which pierce the brain matter are to be named "the penetrating arteries" (T.M. Sundt et al., 1976). Considering the Greek word "encephalon", which means "the brain", all the arteries of the brain could be designated as encephalic, while conducting arteries--as preencephalic, and intracerebral (penetrating) arteries--as intraencephalic.

  16. Next generation terminology infrastructure to support interprofessional care planning.

    Science.gov (United States)

    Collins, Sarah; Klinkenberg-Ramirez, Stephanie; Tsivkin, Kira; Mar, Perry L; Iskhakova, Dina; Nandigam, Hari; Samal, Lipika; Rocha, Roberto A

    2017-11-01

    Develop a prototype of an interprofessional terminology and information model infrastructure that can enable care planning applications to facilitate patient-centered care, learn care plan linkages and associations, provide decision support, and enable automated, prospective analytics. The study steps included a 3 step approach: (1) Process model and clinical scenario development, and (2) Requirements analysis, and (3) Development and validation of information and terminology models. Components of the terminology model include: Health Concerns, Goals, Decisions, Interventions, Assessments, and Evaluations. A terminology infrastructure should: (A) Include discrete care plan concepts; (B) Include sets of profession-specific concerns, decisions, and interventions; (C) Communicate rationales, anticipatory guidance, and guidelines that inform decisions among the care team; (D) Define semantic linkages across clinical events and professions; (E) Define sets of shared patient goals and sub-goals, including patient stated goals; (F) Capture evaluation toward achievement of goals. These requirements were mapped to AHRQ Care Coordination Measures Framework. This study used a constrained set of clinician-validated clinical scenarios. Terminology models for goals and decisions are unavailable in SNOMED CT, limiting the ability to evaluate these aspects of the proposed infrastructure. Defining and linking subsets of care planning concepts appears to be feasible, but also essential to model interprofessional care planning for common co-occurring conditions and chronic diseases. We recommend the creation of goal dynamics and decision concepts in SNOMED CT to further enable the necessary models. Systems with flexible terminology management infrastructure may enable intelligent decision support to identify conflicting and aligned concerns, goals, decisions, and interventions in shared care plans, ultimately decreasing documentation effort and cognitive burden for clinicians and

  17. Suggestions for a consistent terminology for seismic anisotropy

    Energy Technology Data Exchange (ETDEWEB)

    Crampin, S. (British Geological Survey, Edinburgh (UK))

    1989-10-01

    Seismic anisotropy is an unfamiliar concept to many geophysicists and the use of misleading and ambiguous terminology has made it more difficult to understand. The author suggests here a consistent terminology in which simple expressions have specific meanings similar to their colloquial meanings. It is hoped that the use of such language will help to make the increasing number of papers reporting seismic anisotropy more readily comprehensible to the non-specialist. This is a list of terms which may make anisotropy easier to understand for those familiar with wave propagation in isotropic solids.

  18. Manual of symbols and terminology for physicochemical quantities and units

    CERN Document Server

    Whiffen, D H

    2013-01-01

    Manual of Symbols and Terminology for Physicochemical Quantities and Units, 1979 Edition contains physical quantity tabulations of products. The Commission on Symbols, Terminology, and Units is a part of the Division of Physical Chemistry of the International Union of Pure and Applied Chemistry. Its general responsibilities are to secure clarity and precision, and wider agreement in the use of symbols, by chemists in different countries, among physicists, chemists, and engineers, and by editors of scientific journals. This book is composed of 13 chapters, and begins with the determination o

  19. Geoscience terminology for data interchange: the CGI Geoscience Terminology Work Group (Invited)

    Science.gov (United States)

    Richard, S. M.; Gtwg, G.

    2013-12-01

    The Commission for the Management and Application of Geoscience Information (CGI), a Commission of the International Union of Geological Sciences (IUGS) has formed the Geoscience Terminology Working Group (GTWG, http://www.cgi-iugs.org/tech_collaboration/ geoscience_terminology_ working_group.html) to unify vocabulary development efforts of the Multhes working group of the 1990s, the Multilingual Thesaurus Working Group (MLT) formed in 2003, and the Concept Definition Task Group formed in 2007. The workgroup charge is to develop, review, adopt, publish, and steward vocabularies and associated documentation for use in geoscience information systems. The group will develop liaisons with other semantic interoperability groups to ensure cross-domain interoperability. The objective is to create vocabularies that bind URIs to geoscience concepts, and allow linking between concepts in the CGI vocabularies and other vocabularies such as SWEET, GEMET, and the GCMD. Representations of the concepts use SKOS RDF/XML and a standardized vocabulary service that to enable navigating links to concepts, accessing definitions, and obtaining language-localized labels for concepts. The SISSvoc service developed by CSIRO Australia has been deployed for CGI vocabulary services. Vocabularies are currently constructed by gathering candidate terms in spreadsheet tables because these are easy for text editing and review. When the vocabulary is mature, it is migrated into SKOS, an RDF application for encoding concepts with identifiers, definitions, source information, standard thesaurus type relationships, and language-localized labels. Each vocabulary is 'shepherded' by a GTWG member, who is responsible for organizing a team to compile a draft vocabulary, present it for review by appropriate authorities, respond to review comments, and determine when the vocabulary is ready for adoption by a vote of the workgroup. The first meeting of the work group took place, hosted by VSEGEI in St

  20. APS 3D: a new benchmark in aspherical polishing

    Science.gov (United States)

    Gauch, Daniel; Mikulic, Dalibor; Veit, Christian

    2017-10-01

    The APS 3D system performs polishing and form correction in one step in order to reduce overall process time, reduce the number of polishing steps required and eliminate the need for highly skilled operators while providing a repeatable polishing process. This new 3D Polishing system yields better surface quality, and a better slope error, automatically determining the optimum speeds, feed rates and polish pressures to achieve a deterministic process based on the required quality parameters input by the operator. The process flow is always the same to ensure consistent quality and target quality values are defined before polishing begins.

  1. PyMedTermino: an open-source generic API for advanced terminology services.

    Science.gov (United States)

    Lamy, Jean-Baptiste; Venot, Alain; Duclos, Catherine

    2015-01-01

    The integration of terminologies is still a challenging problem in medical informatics research and software applications, due to the high number of heterogeneous terminologies. In this paper, we present a generic API (Application Programming Interface) for a multi-terminology multilingual terminology service, and PyMedTermino, its open-source implementation in Python with 5 terminological resources (ICD10, SNOMED CT, MedDRA, CDF, VCM iconic language) and the UMLS compendium. This service has been designed for research and educational purpose. It offers various advanced functionalities rarely present in terminology services.

  2. Anatomic Preformed Post: Case Report

    OpenAIRE

    Lamas Lara, César; Cirujano Dentista, Docente del Área de Operatoria Dental y Endodoncia de la Facultad de OdontoIogía de la UNMSM.; Alvarado Menacho, Sergio; Cirujano Dentista, Especialista en Rehabilitación Oral, Profesor Asociado del Área de Prótesis y Oclusión de la Facultad de Odontología de la UNMSM.; Pari Espinoza, Rosa; Alumna del 5to año de Odontología de la UNMSM.

    2014-01-01

    Nowadays, preformed posts are being used frequently, but they do not follow root canal anatomy. Obtaining a more anatomical form of the root canal and reducing the space of the cement, it would help to reduce the possibility of its eviction. This article details the process of making of an anatomical preformed post and the advantages that would represent its clinical use. En la actualidad los postes preformados se utilizan con mucha frecuencia, pero tienenla dificultad de no seguir la anat...

  3. Material removal mechanisms in abrasive vibration polishing of complex molds

    Science.gov (United States)

    Brinksmeier, E.; Riemer, O.; Schulte, H.

    2010-10-01

    Optical and medical industries are demanding a large variety of optical elements exhibiting complex geometries and multitude opto-functional areas in the range of a few millimeters [1]. Therefore, mold inserts made of steel or carbides must be finished by polishing for the replication of glass and plastic lenses [2]. For polishing theses complex components in the shape of localized cavities or grooves the application of rotating polishing pads is very limited. Established polishing processes are not applicable, so state of the art is a time consuming and therefore expensive polishing procedures by hand. An automated process with conventional polishing machines is impossible because of the complex mold insert geometry. The authors will present the development of a new abrasive polishing process for finishing these complex mold geometries to optical quality. The necessary relative velocity in the contact area between polishing pad and workpiece surface is exclusively realized by vibration motions which is an advantage over vibration assisted rotating polishing processes. The absence of rotation of the pad opens up the possibility to machine new types of surface geometries. The specific influence factors of vibration polishing were analyzed and will be presented. The determination of material removal behavior and polishing effect on planar steel samples has shown that the conventional abrasive polishing hypothesis of Preston is applicable to the novel vibration polishing process. No overlaid chemical material removal appears.

  4. Polish Academy of Sciences Great Dictionary of Polish [Wielki słownik języka polskiego PAN

    Directory of Open Access Journals (Sweden)

    Piotr Žmigrodzki

    2014-12-01

    Full Text Available The paper describes a lexicographical project involving the development of the newest general dictionary of the Polish language: the Polish Academy of Sciences Great Dictionary of Polish [Wielki słownik języka polskiego PAN]. The project is coordinated by the Institute of Polish Language at the Polish Academy of Sciences and carried out in collaboration with linguists and lexicographers from several other Polish academic centres. The paper offers a brief description of the genesis of the project and the scope of information included in the dictionary, the organisation of work, the life of the dictionary on the Web as well as the plans for the future.

  5. Surface Roughness and Gloss of Actual Composites as Polished With Different Polishing Systems.

    Science.gov (United States)

    Rodrigues-Junior, S A; Chemin, P; Piaia, P P; Ferracane, J L

    2015-01-01

    This in vitro study evaluated the effect of polishing with different polishing systems on the surface roughness and gloss of commercial composites. One hundred disk-shaped specimens (10 mm in diameter × 2 mm thick) were made with Filtek P-90, Filtek Z350 XT, Opallis, and Grandio. The specimens were manually finished with #400 sandpaper and polished by a single operator using three multistep systems (Superfix, Diamond Pro, and Sof-lex), one two-step system (Polidores DFL), and one one-step system (Enhance), following the manufacturer's instructions. The average surface roughness (μm) was measured with a surface profilometer (TR 200 Surface Roughness Tester), and gloss was measured using a small-area glossmeter (Novo-Curve, Rhopoint Instrumentation, East Sussex, UK). Data were analyzed by two-way analysis of variance and Tukey's test (α=0.05). Statistically significant differences in surface roughness were identified by varying the polishing systems (pGrandio when polished with Sof-Lex and Filtek Z250 and Opallis when polished with Enhance. Gloss was influenced by the composites (p<0.0001), the polishing systems (p<0.0001), and the interaction between them (p<0.0001). The one-step system, Enhance, produced the lowest gloss for all composites. Surface roughness and gloss were affected by composites and polishing systems. The interaction between both also influenced these surface characteristics, meaning that a single polishing system will not behave similarly for all composites. The multistep systems produced higher gloss, while the one-step system produced the highest surface roughness and the lowest gloss of all.

  6. A cognitive analysis of metaphor in Shona terminological dictionaries

    African Journals Online (AJOL)

    It is well-known among linguists and lexicographers that metaphor plays a pivotal role in the creation of new terminology and its importance in the expansion of the Shona lexicon in response to scientific, technical and educational demands cannot be overemphasised. Like most languages, Shona is growing through the use ...

  7. Power Transformers: Technical Terminology Bulletin. Terminotech, Vol.2, No. 6.

    Science.gov (United States)

    General Electric Co. of Canada, Ltd., Montreal, Quebec.

    This issue of a bulletin of technological terminology is devoted to power transformers. A brief narrative on the subject is presented in both French and English. An English-French dictionary of terms comprises the bulk of the document. Explanatory illustrations are appended. (JB)

  8. Natural science and technology terminology in the sesotho sa leboa ...

    African Journals Online (AJOL)

    The main purpose for lemmatizing the natural science and technology terminology is to give these lexical items comprehensive definitions in Sesotho sa Leboa, instead of 'a one word translation definition' as is the case in the bilingual and multilingual dictionaries. Keywords: transliteration, coinage, coined lexical item, loan ...

  9. Latest German-English Terminology in CADCAM & Robotics

    Science.gov (United States)

    Hussain, S. M.

    2014-07-01

    As a technical translator who speaks German fluently, the author would like to study and display the latest bilingual technical terminology in German being used in hardware, software and process technology involved in CADCAM & ROBOTICS. This will greatly help technical translators to correctly translate difficult texts from this area of technology.

  10. PROTEGE as a vehicle for developing medical terminological systems

    NARCIS (Netherlands)

    Abu-Hanna, A.; Cornet, R.; de Keizer, N.; Crubezy, M.; Tu, S.

    2005-01-01

    A medical terminological system (TS) is essentially an ontology consisting of concepts, attributes and relationships pertaining to medical terms. There are many TSs around today, most of which are essentially frame-based. Various efforts have been made to get a better understanding of the

  11. Teaching Strategies: Supporting EAL Students in Learning Biology Terminology

    Science.gov (United States)

    Fernando, Primani; Cooper, Rebecca

    2017-01-01

    This paper provides a brief introduction to teaching strategies that can be used to support English as Additional Language (EAL) students in learning biology terminology. The paper begins with an overview of EAL students and considers the difficulties that they may face in the classroom along with the challenges that mainstream teachers may have…

  12. Conflicts of Principles and Ideologies in Musicological Terminology ...

    African Journals Online (AJOL)

    It becomes incumbent upon the dominance of the Orient music to nullify as biased, the European and North American laid down determinant factors for the apt musical terminologies. This call needs urgent attention, especially in the face of the scramble for musico-cultural identity under globalization syndrome. With this ...

  13. Terminology and nomenclature in sport and exercise medicine

    African Journals Online (AJOL)

    well-defined terminology, the results of studies can be compared and the knowledge in that area develops at a more rapid rate. There are many examples in sport and exercise medicine research where this has happened. Consider cricket research, where the lack of consistent definitions for injury in the sport resulted in the ...

  14. 9 CFR 146.44 - Terminology and classification; States.

    Science.gov (United States)

    2010-01-01

    ... Special Provisions for Meat-Type Turkey Slaughter Plants § 146.44 Terminology and classification; States... Avian Influenza Monitored State, Turkeys when it has been determined by the Service that: (i) All meat..., the source of all meat-type turkey specimens that were deemed positive on an official test for avian...

  15. Remote sensing terminology: past experience and recent needs

    Science.gov (United States)

    Kancheva, Rumiana

    2013-10-01

    Terminology is a key issue for a better understanding among people using various languages. Terminology accuracy is essential during all phases of international cooperation. It is crucial to keep up with the latest quantitative and qualitative developments and novelties of the terminology in advanced technology fields such as aerospace science and industry. This is especially true in remote sensing and geoinformatics which develop rapidly and have wide and ever extending applications in various domains of human activity. The importance of the correct use of remote sensing terms refers not only to people working in this field but also to experts in many disciplines who handle remote sensing data and information products. The paper is devoted to terminology issues that refer to all aspects of remote sensing research and application areas. The attention is drawn on the recent needs and peculiarities of compiling specialized dictionaries in the subject area of remote sensing. Details are presented about the work in progress on the preparation of an English-Bulgarian dictionary of remote sensing terms focusing on Earth observations and geoinformation science. Our belief is that the elaboration of bilingual and multilingual dictionaries and glossaries in this spreading, most technically advanced and promising field of human expertise is of great practical importance. Any interest in cooperation and initiating of suchlike collaborative multilingual projects is welcome and highly appreciated.

  16. Beyond Terminology: The Policy Impact of a Grassroots Movement

    Science.gov (United States)

    Ford, Marty; Acosta, Annie; Sutcliffe, T. J.

    2013-01-01

    This article discusses the history of the grassroots movement led by self-advocates and their families to replace the stigmatizing term "mental retardation" with "intellectual disability" in federal statute. It also describes recent and pending changes in federal regulations and policy to adopt the new terminology for Social Security and Medicaid.

  17. The National Terminology Services: a new paradigm | Jordaan ...

    African Journals Online (AJOL)

    The new dispensation in South Africa necessitated a paradigm shift at the National Terminology Services (NTS). Being part of the Central Government, the NTS has to implement policy as laid down by the government of the day. Former policy, processes and products are described as well as the vision and objectives for the ...

  18. Terminology of Sexuality Expressions that Exclude Penetration: A Literature Review

    Science.gov (United States)

    Menn, Mindy; Goodson, Patricia; Pruitt, Buzz; Peck-Parrott, Kelli

    2011-01-01

    Precise terminology is paramount in sexuality education. Most sexuality research focuses on the dichotomous concepts of sexual intercourse and virginity, yet there are many expressions of sexuality classified as neither. The purpose of this literature review is to identify and examine the various terms and definitions describing sexuality…

  19. Latest German-English Terminology in CADCAM and Robotics

    International Nuclear Information System (INIS)

    Hussain, S M

    2014-01-01

    As a technical translator who speaks German fluently, the author would like to study and display the latest bilingual technical terminology in German being used in hardware, software and process technology involved in CADCAM and ROBOTICS. This will greatly help technical translators to correctly translate difficult texts from this area of technology

  20. Clinical Terminology: Anxiety and Confusion amongst Families Undergoing Genetic Counseling.

    Science.gov (United States)

    Chapple, Alison; Campion, Peter; May, Carl

    1997-01-01

    An ethnographic study of families (N=30) receiving genetic counseling explored participants' perceptions of the process. Focuses on respondents' confusion about the meaning of medical terms. Although clients approved of the way information was presented, terminology was often confusing or frightening. Specific examples are presented and discussed.…

  1. Terminology and definitions on groin pain in athletes

    DEFF Research Database (Denmark)

    Weir, Adam; Hölmich, Per; Schache, Anthony G

    2015-01-01

    taxonomy reflects only a slight agreement between the various diagnostic terms provided by the selected experts. CONCLUSIONS: This short Delphi survey of two 'typical, straightforward' cases demonstrated major inconsistencies in the diagnostic terminology used by experts for groin pain in athletes...

  2. Problems of Kinship Terminology: A Case in Some English ...

    African Journals Online (AJOL)

    R.B. Ruthven

    Stone (2000: 5) sees kinship as relationships between persons based on descent or marriage. However, kinship terminology varies from one language to an- other. In some instances, providing the actual meaning and correct equivalents of kinship terms is difficult. Languages differ in the way they express certain meanings.

  3. 18 CFR 380.2 - Definitions and terminology.

    Science.gov (United States)

    2010-04-01

    ... information concerning the environment, the applicant's analysis of the environmental impact of the action, or... POLICY ACT § 380.2 Definitions and terminology. For purposes of this part— (a) Categorical exclusion... significant effect on the human environment and which the Commission has found to have no such effect and for...

  4. Iron Metallurgy: Technical Terminology Bulletin. Terminotech, Vol. 2, No. 7.

    Science.gov (United States)

    General Electric Co. of Canada, Ltd., Montreal, Quebec.

    This issue of a bulletin of technological terminology is devoted to iron metallurgy. Various aspects of iron production are described in both French and English. An English-French dictionary of terms comprises the bulk of the document. Explanatory illustrations are appended. (JB)

  5. Traduction automatique et terminologie automatique (Automatic Translation and Automatic Terminology

    Science.gov (United States)

    Dansereau, Jules

    1978-01-01

    An exposition of reasons why a system of automatic translation could not use a terminology bank except as a source of information. The fundamental difference between the two tools is explained and examples of translation and mistranslation are given as evidence of the limits and possibilities of each process. (Text is in French.) (AMH)

  6. Kyo Kageura. The Dynamics of Terminology: A Descriptive Theory of ...

    African Journals Online (AJOL)

    rbr

    This monograph was issued as Volume 5 in the series Terminology and Lexi- cography Research and Practice, ... European terminologists since the 1990s, notably the British linguists Juan C. Sager (Manchester, UMIST) and ... For all types and models of intra-term conceptual relations the English translation is given.

  7. 9 CFR 145.34 - Terminology and classification; States.

    Science.gov (United States)

    2010-01-01

    ... Special Provisions for Multiplier Meat-Type Chicken Breeding Flocks and Products § 145.34 Terminology and...). (ii) No pullorum disease or fowl typhoid is known to exist nor to have existed in hatchery supply... typhoid occur in hatchery supply flocks described in paragraph (a)(1)(ii) of this section, or if an...

  8. 9 CFR 145.24 - Terminology and classification; States.

    Science.gov (United States)

    2010-01-01

    ... Special Provisions for Multiplier Egg-Type Chicken Breeding Flocks and Products § 145.24 Terminology and...). (ii) No pullorum disease or fowl typhoid is known to exist nor to have existed in hatchery supply... typhoid occur in hatchery supply flocks described in paragraph (a)(1)(ii) of this section, or if an...

  9. Centre for Political and Related Terminology in Southern African ...

    African Journals Online (AJOL)

    The aim of CEPTSA is to promote the usage of political and related terminology in Southern Africa. Research is being done on these subject fields, and relevant concepts and terms are harvested, defined and translated. The source language is English and Afrikaans was initially the target language. The Centre, however ...

  10. Anatomical pathology is dead? Long live anatomical pathology.

    Science.gov (United States)

    Nicholls, John M; Francis, Glenn D

    2011-10-01

    The standard diagnostic instrument used for over 150 years by anatomical pathologists has been the optical microscope and glass slide. The advent of immunohistochemistry in the routine laboratory in the 1980s, followed by in situ hybridisation in the 1990s, has increased the armamentaria available to the diagnostic pathologist, and this technology has led to changed patient management in a limited number of neoplastic diseases. The first decade of the 21 century has seen an increasing number of publications using proteomic technologies that promise to change disease diagnosis and management, the traditional role of an anatomical pathologist. Despite the plethora of publications on proteomics and pathology, to date there are actually limited data where proteomic technologies do appear to be of greater diagnostic value than the standard histological slide. Though proteomic techniques will become more prevalent in the future, it will need the expertise of an anatomical pathologist to dissect out and validate this added information.

  11. Terminologi Rumah Adat Dalam Loka Sumbawa: Sebuah Tinjauan Antropolinguistik

    Directory of Open Access Journals (Sweden)

    Wawan Hermansyah

    2016-10-01

    Full Text Available In Loka custom home that is still standing firm in the middle of the town of Sumbawa Besar is a historical witness that shows the glory of the Sultanate of Sumbawa in its time. Terminology richness that included in Dalam Loka custom home providing space for the language and culture reviewers to understand more deeply what happened in the past time based on the symbols of things and suggests how the ancient life with profound meaning. Thus, to express forms of terminology and understand the values held in Dalam Loka custom home, it is necessary to be traced through the linguistic approach or the study of culture called antropholinguistic. Therefore, the theory used in this research is antropolinguistic theory and social semiotic theory. This study used a qualitative descriptive approach. The types and sources of data used are classified into two types: primary data and secondary data. The methods used in the method of data collection were listening and conversation. The data were analyzed by using intralingual equivalence and ekstralingual equivalence method. The results and discussion of this research found that forms of terminology in the Dalam Loka custom home in Sumbawa derived from some languages, which is derived from the Javanese, Makassar and Malay languages. Moreover, as for other forms of terminology found in Dalam Loka custom home in Sumbawa derived from foreign languages, such as Arabic and Sanskrit language. The cultural context shapes the terminology in the Dalam Loka custom home in Sumbawa indicate the existence of a civilization with a system of government and the imperial system in the form of aristocracy. System of government rests on the king (sultan is a system that includes customs, governance and law.

  12. Platerm: la banque de terminologie du systeme Platon (PLATERM: The Terminology Bank of the PLATO System).

    Science.gov (United States)

    Schwab, Wallace; St-Denis, Richard

    1980-01-01

    Describes the elements and functioning of the terminology bank of the PLATO (Programmed Loqic for Automated Teaching Operation) system. Discusses contemporary terminology and lexicography notions on which the bank is based and outlines the tasks performed through PLATERM. (MES)

  13. Comparison of Japanese notation and meanings among three terminologies in radiological technology domain

    International Nuclear Information System (INIS)

    Yagahara, Ayako; Tsuji, Shintaro; Fukuda, Akihisa; Nishimoto, Naoki; Ogasawara, Katsuhiko

    2016-01-01

    The purpose of this study is to investigate the differences in the notation of technical terms and their meanings among three terminologies in Japanese radiology-related societies. The three terminologies compared in this study were 'radiological technology terminology' and its supplement published by the Japan Society of Radiological Technology, 'medical physics terminology' published by the Japan Society of Medical Physics, and 'electric radiation terminology' published by the Japan Radiological Society. Terms were entered into spreadsheets and classified into the following three categories: Japanese notation, English notation, and meanings. In the English notation, terms were matched to character strings in the three terminologies and were extracted and compared. The Japanese notations were compared among three terminologies, and the difference between the meanings of the two terminologies radiological technology terminology and electric radiation terminology were compared. There were a total of 14,982 terms in the three terminologies. In English character strings, 2,735 terms were matched to more than two terminologies, with 801 of these terms matched to all the three terminologies. Of those terms in English character strings matched to three terminologies, 752 matched to Japanese character strings. Of the terms in English character strings matched to two terminologies, 1,240 matched to Japanese character strings. With regard to the meanings category, eight terms had mismatched meanings between the two terminologies. For these terms, there were common concepts between two different meaning terms, and it was considered that the derived concepts were described based on domain. (author)

  14. Microbiological flora and nail polish: a brief report.

    Science.gov (United States)

    Rayan, G M; Flournoy, D J; Schlageter, P

    1994-11-01

    Removing nail polish and prosthetic nails from operating room (OR) personnel prior to scrubbing and from patients prior to hand surgery is recommended but not practiced in many hospitals. There is concern that nail polish can act as a vehicle for the transfer of infectious agents. This study was designed to determine the incidence of microbiological flora of nail polish in a clinical setting.

  15. Monitoring of Robot Assisted Polishing through parameters of acoustic emission

    DEFF Research Database (Denmark)

    Lazarev, Ruslan; Top, Søren; Bilberg, Arne

    The polishing process is essential for the surface generation of machine tooling components in advanced manufacturing. While robot assisted polishing is faster and more consistent than manual polishing, it can still consume a significant part of ma- chining time and operator presence time...

  16. 21 CFR 872.6030 - Oral cavity abrasive polishing agent.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Oral cavity abrasive polishing agent. 872.6030... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6030 Oral cavity abrasive polishing agent. (a) Identification. An oral cavity abrasive polishing agent is a device in paste or powder form...

  17. Professional Training of Economists at Polish Universities

    Science.gov (United States)

    Ogienko, Olena

    2016-01-01

    Polish experience in professional training of economists at university has been generalized. Structural, content and procedural peculiarities of the training have been defined. It has been proved that key factors for reforming economic education in Poland are globalization, internationalization, integration, technologization and informatization.…

  18. Knowledge Mobilisation in the Polish Education System

    Science.gov (United States)

    Fazlagic, Jan; Erkol, Arif

    2015-01-01

    Poland has made substantial progress in improving the quality of its education system in recent years. This paper aims to describe the situation of the Polish education system from a knowledge management perspective and, to some extent, through innovation policies in education. The many challenges, this paper argues, can be tackled only through…

  19. Sexual Health of Polish Athletes with Disabilities

    Directory of Open Access Journals (Sweden)

    Ryszard Plinta

    2015-06-01

    Full Text Available The purpose of this study was to determine sexual functioning of Polish athletes with disabilities (including paralympians. The study encompassed 218 people with physical disabilities, aged between 18 and 45 (149 men and 69 women. The entire research population was divided into three groups: Polish paralympians (n = 45, athletes with disabilities (n = 126 and non-athletes with disabilities (n = 47. The quality of sexual life of Polish paralympians was measured by using the Polish version of Female Sexual Function Index and International Index of Erectile Function. Clinically significant erectile dysfunctions were most often diagnosed in non-athletes (83.33% with 50% result of severe erectile dysfunctions, followed by athletes and paralympians with comparable results of 56.98% and 54.17% respectively (p = 0.00388. Statistically significant clinical sexual dysfunctions concerned lubrication, orgasm as well as pain domains, and prevailed among female non-athletes (68.42%, 68.42% and 57.89%. Practising sports at the highest level has a favourable effect on the sexuality of men and women with physical disabilities. Men with physical disabilities manifest more sexual disorders than women, an aspect which should be considered by health-care professionals working with people with disabilities.

  20. Technological Advances of Robot Assisted Polishing

    DEFF Research Database (Denmark)

    Lazarev, Ruslan; Top, Søren; Grønbæk, Jens

    The efficient polishing of surfaces is very important in mould and die industry. Fine abrasive processes are widely used in industry for the first steps for the production of tools of high quality in terms of finishing accuracy, form and surface integrity. While manufacturing of most components r...

  1. Polish Complementary Schools in Iceland and England

    Science.gov (United States)

    Zielinska, Malgorzata; Kowzan, Piotr; Ragnarsdóttir, Hanna

    2014-01-01

    Since 2004, the opening of labour markets has spurred a considerable number of Poles to emigrate e.g. to Iceland and England. Families with school age children have had the challenge of adapting to foreign environments and school systems. Polish complementary schools have played an important, albeit ambivalent, role in this process. Through focus…

  2. AnatomicalTerms.info: heading for an online solution to the anatomical synonym problem hurdles in data-reuse from the Terminologia Anatomica and the foundational model of anatomy and potentials for future development.

    Science.gov (United States)

    Gobée, O Paul; Jansma, Daniël; DeRuiter, Marco C

    2011-10-01

    The many synonyms for anatomical structures confuse medical students and complicate medical communication. Easily accessible translations would alleviate this problem. None of the presently available resources-Terminologia Anatomica (TA), digital terminologies such as the Foundational Model of Anatomy (FMA), and websites-are fully satisfactory to this aim. Internet technologies offer new possibilities to solve the problem. Several authors have called for an online TA. An online translation resource should be easily accessible, user-friendly, comprehensive, expandable, and its quality determinable. As first step towards this goal, we built a translation website that we named www.AnatomicalTerms.info, based on the database of the FMA. It translates between English, Latin, eponyms, and to a lesser extent other languages, and presently contains over 31,000 terms for 7,250 structures, covering 95% of TA. In addition, it automatically presents searches for images, documents and anatomical variations regarding the sought structure. Several terminological and conceptual issues were encountered in transferring data from TA and FMA into AnatomicalTerms.info, resultant from these resources' different set-ups (paper versus digital) and targets (machine versus human-user). To the best of our knowledge, AnatomicalTerms.info is unique in its combination of user-friendliness and comprehensiveness. As next step, wiki-like expandability will be added to enable open contribution of clinical synonyms and terms in different languages. Specific quality measures will be taken to strike a balance between open contribution and quality assurance. AnatomicalTerms.info's mechanism that "translates" terms to structures furthermore may enhance targeted searching by linking images, descriptions, and other anatomical resources to the structures. Copyright © 2011 Wiley-Liss, Inc.

  3. Transformation of the Polish Banking Sector

    Directory of Open Access Journals (Sweden)

    Marek Stefański

    2009-07-01

    Full Text Available In the post-war period the banking system in Poland underwent two important system transitions: after 1946 and after 1989. The third transformation began after May 1, 2004, but it did not have a systemic character. The Polish banking sector started to operate on the Single European Market. The first part of the paper is devoted to the problems of the banks transformations after 1989 with a special focus on the quantitative development of banks in 19892008, and on subsequent privatisation and consolidation processes. The former intensified in 19891999, and the latter in 19992002. The consolidation process was very noticeable in the sector of cooperative banks after 1994. The second part of the paper includes an economic and financial analysis of the banks. A lot of attention was paid to the liquidity of the banking sector. It was assessed as good, which was confirmed by a short-term rating of Moodys and by the Financial Stability Report 2009, published by the National Bank of Poland in June 2009. The comparison of the net profit of the banking sector in 19972008 shows its dependence on the economic situation and policy. The number of banks with capital adequacy ratio well above the minimum required by the banking supervision is rising. The financial power ratings are not favorable for the domestic banks. The third part of the paper focuses on the development directions of the Polish banking sector. It may be concluded on the basis of the analysis that privatisation and consolidation processes will be continued. They will concentrate on the capital of foreign banks already operating in Poland. As compared with individual foreign banks, the potential of the Polish banking sector is week. The fourth part of the paper focuses on the presentation Polish banking sector in the context of European Union banking sector. The paper finishes with conclusions. Generally, Polish banks have to implement a strategy to enable them to compete on the Single

  4. Chemical mechanical glass polishing with cerium oxide: Effect of selected physico-chemical characteristics on polishing efficiency

    Czech Academy of Sciences Publication Activity Database

    Janoš, P.; Ederer, J.; Pilařová, V.; Henych, Jiří; Tolasz, Jakub; Milde, D.; Opletal, T.

    2016-01-01

    Roč. 362, SEP (2016), s. 114-120 ISSN 0043-1648 R&D Projects: GA MŠk(CZ) LM2015073 Institutional support: RVO:61388980 Keywords : Chemical mechanical polishing * Ceria-based polishing powders * Polishing efficienc Subject RIV: CA - Inorganic Chemistry Impact factor: 2.531, year: 2016

  5. Review of the Nomenclature of the Retaining Ligaments of the Cheek: Frequently Confused Terminology

    Directory of Open Access Journals (Sweden)

    Yeui Seok Seo

    2017-07-01

    Full Text Available Since the time of its inception within facial anatomy, wide variability in the terminology as well as the location and extent of retaining ligaments has resulted in confusion over nomenclature. Confusion over nomenclature also arises with regard to the subcutaneous ligamentous attachments, and in the anatomic location and extent described, particularly for zygomatic and masseteric ligaments. Certain historical terms—McGregor’s patch, the platysma auricular ligament, parotid cutaneous ligament, platysma auricular fascia, temporoparotid fasica (Lore’s fascia, anterior platysma-cutaneous ligament, and platysma cutaneous ligament—delineate retaining ligaments of related anatomic structures that have been conceptualized in various ways. Confusion around the masseteric cutaneous ligaments arises from inconsistencies in their reported locations in the literature because the size and location of the parotid gland varies so much, and this affects the relationship between the parotid gland and the fascia of the masseter muscle. For the zygomatic ligaments, there is disagreement over how far they extend, with descriptions varying over whether they extend medially beyond the zygomaticus minor muscle. Even the ‘main’ zygomatic ligament’s denotation may vary depending on which subcutaneous plane is used as a reference for naming it. Recent popularity in procedures using threads or injectables has required not only an accurate understanding of the nomenclature of retaining ligaments, but also of their location and extent. The authors have here summarized each retaining ligament with a survey of the different nomenclature that has been introduced by different authors within the most commonly cited published papers.

  6. Development of Geography and Geology Terminology in British Sign Language

    Science.gov (United States)

    Meara, Rhian; Cameron, Audrey; Quinn, Gary; O'Neill, Rachel

    2016-04-01

    The BSL Glossary Project, run by the Scottish Sensory Centre at the University of Edinburgh focuses on developing scientific terminology in British Sign Language for use in the primary, secondary and tertiary education of deaf and hard of hearing students within the UK. Thus far, the project has developed 850 new signs and definitions covering Chemistry, Physics, Biology, Astronomy and Mathematics. The project has also translated examinations into BSL for students across Scotland. The current phase of the project has focused on developing terminology for Geography and Geology subjects. More than 189 new signs have been developed in these subjects including weather, rivers, maps, natural hazards and Geographical Information Systems. The signs were developed by a focus group with expertise in Geography and Geology, Chemistry, Ecology, BSL Linguistics and Deaf Education all of whom are deaf fluent BSL users.

  7. STUDY OF POLISHING AISI 316L WITH STRUCTURED ABRASIVE

    Directory of Open Access Journals (Sweden)

    François GOOSSENS

    2015-05-01

    Full Text Available Finishing process like polishing is usually used to obtain high quality mechanical surface characteristics such as texture and roughness. These operations are mainly handmade and need highly trained operators thus limiting their repeatability and profitability. To optimize the industrialization of the polishing process, it is therefore necessary to modelize the process to built efficient parameter database. The aim of this study is to characterise the polishing of 316L stainless steel with structured abrasive belts. The geometric data of the belts are given, and we then propose a model to determine material removal. An experimental test bench is set up to test this model and characterise the polishing process in terms of forces. It produces samples for different polishing conditions. The different polished surfaces are then analyzed thanks to the roughness and the wettability. Using experimental designs, we are able to validate the proposed model and identify the parameters that influence a polishing operation.

  8. New Challenges in the Translation of Terminology for Software Applications

    OpenAIRE

    Belda-Medina, Jose Ramon

    2015-01-01

    English has played a dominant role in the terminology of computers and the New Technologies in the last decades. The growing expansion worldwide of different electronic devices and multitasking smart phones has brought about an increasing number of software applications or apps in the market. Creating multilingual applications is a major challenge for developers and companies as sale revenues are on the rise in this sector. The translation and localisation into Spanish and other languages ent...

  9. Auditing as Part of the Terminology Design Life Cycle

    Science.gov (United States)

    Min, Hua; Perl, Yehoshua; Chen, Yan; Halper, Michael; Geller, James; Wang, Yue

    2006-01-01

    Objective To develop and test an auditing methodology for detecting errors in medical terminologies satisfying systematic inheritance. This methodology is based on various abstraction taxonomies that provide high-level views of a terminology and highlight potentially erroneous concepts. Design Our auditing methodology is based on dividing concepts of a terminology into smaller, more manageable units. First, we divide the terminology’s concepts into areas according to their relationships/roles. Then each multi-rooted area is further divided into partial-areas (p-areas) that are singly-rooted. Each p-area contains a set of structurally and semantically uniform concepts. Two kinds of abstraction networks, called the area taxonomy and p-area taxonomy, are derived. These taxonomies form the basis for the auditing approach. Taxonomies tend to highlight potentially erroneous concepts in areas and p-areas. Human reviewers can focus their auditing efforts on the limited number of problematic concepts following two hypotheses on the probable concentration of errors. Results A sample of the area taxonomy and p-area taxonomy for the Biological Process (BP) hierarchy of the National Cancer Institute Thesaurus (NCIT) was derived from the application of our methodology to its concepts. These views led to the detection of a number of different kinds of errors that are reported, and to confirmation of the hypotheses on error concentration in this hierarchy. Conclusion Our auditing methodology based on area and p-area taxonomies is an efficient tool for detecting errors in terminologies satisfying systematic inheritance of roles, and thus facilitates their maintenance. This methodology concentrates a domain expert’s manual review on portions of the concepts with a high likelihood of errors. PMID:16929044

  10. Equivalence of Lease and Tenancy Terminology in English and Lithuanian

    Directory of Open Access Journals (Sweden)

    Rackevičienė Sigita

    2016-12-01

    Full Text Available Prompted by globalization and the importance of international communication in the legal sphere, legal language acquires an increasing importance. Contract law draws special attention in the EU and worldwide, and raises a demand for harmonization of the legal terminology of different languages and legal systems. Contracts in Anglo- Saxon and Lithuanian law have similar basic elements; however, they also contain significant differences which are determined by the regulations of the legal systems in which contracts are formed. The terminology used in the contracts also presents important peculiarities. The article focuses on the terminology of lease and tenancy agreements and provides results of the contrastive semantic analysis, the aim of which is to establish the degree of equivalence of the collected English terms and their Lithuanian counterparts. All investigated English terms have synonyms, which makes the task even more complex, as most of such synonyms have certain semantic differences and may be used interchangeably only in certain contexts. The findings of the research are believed to be valuable to legal translators, as well as compilers of legal dictionaries and databases.

  11. [Big data, medical language and biomedical terminology systems].

    Science.gov (United States)

    Schulz, Stefan; López-García, Pablo

    2015-08-01

    A variety of rich terminology systems, such as thesauri, classifications, nomenclatures and ontologies support information and knowledge processing in health care and biomedical research. Nevertheless, human language, manifested as individually written texts, persists as the primary carrier of information, in the description of disease courses or treatment episodes in electronic medical records, and in the description of biomedical research in scientific publications. In the context of the discussion about big data in biomedicine, we hypothesize that the abstraction of the individuality of natural language utterances into structured and semantically normalized information facilitates the use of statistical data analytics to distil new knowledge out of textual data from biomedical research and clinical routine. Computerized human language technologies are constantly evolving and are increasingly ready to annotate narratives with codes from biomedical terminology. However, this depends heavily on linguistic and terminological resources. The creation and maintenance of such resources is labor-intensive. Nevertheless, it is sensible to assume that big data methods can be used to support this process. Examples include the learning of hierarchical relationships, the grouping of synonymous terms into concepts and the disambiguation of homonyms. Although clear evidence is still lacking, the combination of natural language technologies, semantic resources, and big data analytics is promising.

  12. National Language and Terminology Policies — A South African Perspective

    Directory of Open Access Journals (Sweden)

    Mariëtta Alberts

    2011-10-01

    Full Text Available

    ABSTRACT: Terminology plays a pivotal role in language development and the promotion of multilingualism. This article discusses the issue of multilingualism regarding terminology policies as seen from an African perspective. Special emphasis is given to the South African situation regarding language policies and consequential terminology policies in terms of subject-oriented terminography, translation-oriented terminography and linguistic community-oriented terminography.

    OPSOMMING: Nasionale taal- en terminologiebeleid — 'n Suid-Afrikaanse perspektief. Terminologie speel 'n sleutelrol in taalontwikkeling en die bevordering van veeltaligheid. Hierdie artikel bespreek die kwessie van veeltaligheid ten opsigte van terminologiebeleid soos gesien vanuit 'n Afrikaperspektief. Spesiale klem word gelê op die Suid-Afrikaanse situasie rakende taalbeleid en die gevolglike terminologiebeleid in terme van vakgeörienteerde terminografie, vertaalgeörienteerde terminografie en taalgemeenskapgeörienteerde terminografie.

    Sleutelwoorde: MEERTALIGHEID, TAALBELEID, TAALDIVERSITEIT, TAALGEMEENSKAPGEÖRIENTEERDE TERMINOGRAFIE, TERMINOLOGIEBESTUUR, TERMINOLOGIEONTWIKKELING, VAKGEÖRIENTEERDE TERMINOGRAFIE, VERTAALGEÖRIENTEERDE TERMINOGRAFIE

  13. Terminology Standardization in Education and the Construction of Resources: The Welsh Experience

    Directory of Open Access Journals (Sweden)

    Tegau Andrews

    2016-01-01

    Full Text Available This paper describes developments in Welsh-language terminology within the education system in Wales. Following an outline of historical terminology work, it concentrates on the consolidation of terminology standardization at the Language Technologies Unit, Bangor University, with particular reference to two projects, one concerned with terminology for school-age and further education, the second concerned with higher education. The developments described include the adoption of international standards in terminology standardization and their incorporation in an online terminology standardization environment and dissemination platform that enable access to the centralized terminological dictionaries via a number of sophisticated websites, portals and mobile apps featuring rich dictionary entries. Some of the issues in managing large term collections are explored, and usage statistics are presented for the resources described.

  14. SPECTRAL METHODS IN POLISH EMOTIONAL SPEECH RECOGNITION

    Directory of Open Access Journals (Sweden)

    Paweł Powroźnik

    2016-12-01

    Full Text Available In this article the issue of emotion recognition based on Polish emotional speech signal analysis was presented. The Polish database of emotional speech, prepared and shared by the Medical Electronics Division of the Lodz University of Technology, has been used for research. Speech signal has been processed by Artificial Neural Networks (ANN. The inputs for ANN were information obtained from signal spectrogram. Researches were conducted for three different spectrogram divisions. The ANN consists of four layers but the number of neurons in each layer depends of spectrogram division. Conducted researches focused on six emotional states: a neutral state, sadness, joy, anger, fear and boredom. The averange effectiveness of emotions recognition was about 80%.

  15. Polish 2012 growth references for preschool children.

    Science.gov (United States)

    Kułaga, Zbigniew; Grajda, Aneta; Gurzkowska, Beata; Góźdź, Magdalena; Wojtyło, Małgorzata; Swiąder, Anna; Różdżyńska-Świątkowska, Agnieszka; Litwin, Mieczysław

    2013-06-01

    Growth references are useful in monitoring a child's growth, which is an essential part of child care. The aim of this paper is to provide updated growth references for Polish preschool children and to assess how well children in Poland match or diverge from the World Health Organization (WHO) growth standards/references and recent German height-for-age references. The height-, weight-, body mass index-for-age, and weight-for-height references were constructed with the LMS method using data from a recent, large, population-representative sample of 4,941 preschool children aged 3 to 6 years (the OLA study). In the case of boys, the third, 50th, and 97th height percentiles of new Polish and German references overlap almost completely, whereas the WHO growth standards/references percentiles are systematically lower. In the case of girls, comparison between the new Polish and German height references showed conformity on the third and 50th percentile, whereas body height values of the WHO standards/references are shorter. Polish children aged 3 to 6 years from for the nation representative sample, had significantly greater than zero mean z scores of height-, weight-, and BMI-for-age and weight-for-height, relative to the WHO growth standards/references. The number of children in the sample with height-for-age below -2 SD was significantly lower than expected and number of children with height-for-age above +2 SD was significantly higher than expected. The OLA study growth references can be recommended as national references for preschool children in Poland.

  16. Polish normalization of the Body Esteem Scale

    Directory of Open Access Journals (Sweden)

    Małgorzata Lipowska

    2014-02-01

    Full Text Available Background Physical attractiveness plays an important part in one’s social functioning. The interest in one’s own appearance have been documented as widespread among the female population, but over the recent years it is more and more often emphasized that concentrating on body appearance concerns men as well. Franzoi and Shields (1984 created the Body Esteem Scale which allows to qualify the subject’s attitude towards his or her own body. The aim of the study was to create a Polish version of the Body Esteem Scale along with the norms for age and sex clusters. Participants and procedure The normalization sample consisted of 4298 participants: 1865 women aged 16 to 80 (M = 29.92; SD = 12.85 and 2433 men aged 16 to 78 (M = 28.74; SD = 11.50. Education levels among the participants were also controlled for. In order to create a Polish version of the Body Esteem Scale, translation was adopted as the adaptation strategy. Like the original one, the Polish scale comprises 35 items grouped into three gender specific subscales. The subscales for women include Sexual Attractiveness, Weight Concern, and Physical Condition, whereas the body esteem of is examined with regards to Physical Attractiveness, Upper Body Strength, and Physical Condition. Results Reliability of subscales was high both for females (Cronbach’s alpha from 0.80 to 0.89 and males (Cronbach’s alpha from 0.85 to 0.88. The given coefficients of reliability cover the original division into subscales adopted by the authors of BES. Conclusions We confirmed high reliability of the Polish version of the Body Esteem Scale, thus we recommend it as a diagnostic tool. Created norms allowed to refer results obtained in the course of research carried out on people with various disorders (e.g. eating disorders or body dysmorphic disorder with population data for corresponding age brackets.

  17. Polish Martial Law: The Crisis of Communism

    Science.gov (United States)

    2009-12-01

    Roman Catholic Church continued to exist, and a comparatively liberal cultural policy was in place, which continued a legitimate practice of most of...intervention. Their answers verify that for most Poles the fear 29 of losing sovereignty and Polish culture to Russian aggression overshadows all else, even...they going in? They did not,” Woodrow Wilson International Center for Scholars, http://www.wilsoncenter.org/news/ docs/ Historia -Jachranka%20-%20Stan

  18. The Polish Cyborg. A Reflection on the Relationship between Man and Machine in Early Polish Modernism

    Directory of Open Access Journals (Sweden)

    Emiliano Ranocchi

    2016-12-01

    Full Text Available Far from being enthusiastic “modernolatry” of Italian futurism, Polish futurism demonstrates an attitude of ambivalence toward modernity. This is particularly evident in the Polish approach to that very synecdoche of modernity which is the machine. In his essay of 1923, the leader of the group, Bruno Jasieński, compares the fetishistic cult of the machine, which characterizes the Italian approach, with the utilitarian one of the Russians, exemplified by a quote from Majakovskij. To these two propositions, as a sort of Hegelian synthesis, he adds a Polish one consisting in the conception of the machine as a prosthesis, a continuation of the human body. Thereby he introduces an idea later known as “cyborg”. The category of cyborg is also useful to understand the work of another today almost forgotten Polish writer of the Twenties, Jerzy Sosnkowski. He was the author of a short novel, A Car, You and Me (Love of Machines, in which a whole chapter concerns the chief character’s dystopian nightmare wherein machines take control over the world. The third section of the essay deals with the idea of man a machine – an old, 18th century conception, which became actual anew in the 20th century and whose traces we can find among others in a well-known poem by Tytus Czyżewski. Thirty years before N. Wiener, Polish modernists seem to have sensed the social, political and anthropological implications of the mechanization of work.

  19. Characterization and Streptococcus mutans adhesion on air polishing dentin.

    Science.gov (United States)

    Tada, Kazuhiro; Oda, Hirotake; Inatomi, Michitomo; Sato, Soh

    2014-07-01

    Air polishing is known as an effective and time saving tooth cleaning method. However, this method increased surface roughness and bacterial adhesion on dentin surface. The aim of this study was to characterize and examine Streptococcus mutans adhesion on dentin surface after air polishing as compared to the conventional method. The dentin blocks (4 × 4 × 1 mm) were polished by a rubber cup with polishing material (Polishing) and air-polished by 25 μm glycine (G25), 65 μm glycine (G65), and 65 μm sodium bicarbonate (NHC65) microparticles. Surface roughness (Ra) was measured by a laser electron microscope. The amount of adhered S. mutans was quantified using a resazurin reduction assay (alamarBlue(®)). The Ra of G25 and G65 was significantly (p < 0.01) smaller than that of NHC65 and greater than that of Polishing. However, there was no significant difference in S. mutans adhesion among Polishing, G25, and G65, while NHC65 showed significantly (p < 0.01) higher S. mutans adhesion. Within the limitations of this in vitro study, air polishing using glycine microparticles conditioned S. mutans adhesion on dentin surface in a similar fashion than the conventional method, and less than air polishing using sodium bicarbonate microparticles.

  20. Effects of polishing procedures on color stability of composite resins.

    Science.gov (United States)

    Güler, Ahmet Umut; Güler, Eda; Yücel, Ali Cağin; Ertaş, Ertan

    2009-01-01

    The purpose of this study was to investigate the effect of different polishing methods on color stability of posterior, universal and nanohybrid composite resin restorative materials upon exposure to a staining agent. Twenty-five specimens were prepared for each of 5 different composite resins (Filtek Z250, Filtek P60, Quadrant LC, Grandio and Filtek Supreme). Specimens were divided into 5 groups and different polishing procedures, including polishing discs (Pd), polishing discs then diamond polishing paste (PdP), polishing discs then a liquid polishing system (Biscover) (PdB), and combinations of these (PdPB) were used. Unpolished specimens served as the control (C). The specimens were stored for 48 h in a coffee solution. The color of all specimens was measured before and after exposure with a colorimeter, and total color change (DeltaE*) were calculated. The data were analyzed with a two-way ANOVA and the means were compared by Tukey HSD test (alpha=0.05). The lowest color difference was observed in the groups PdP and C, while the highest color difference was observed in PdPB, and PdB. When comparing the five different restorative materials, no significant difference was observed between FiltekP60 and FiltekZ250, and these materials demonstrated significantly less color change than Quadrant LC and the nanohybrid materials (Grandio, Filtek Supreme). The posterior (Filtek P60) and universal (Filtek Z250) composite resin restorative materials, which do not contain tetraethyleneglycol dimethacrylate (TEGDMA), were found to be less stainable than the nanohybrid (Grandio, Filtek Supreme) and universal (Quadrant LC) composite resins, which contain TEGDMA. The use of diamond polishing paste after polishing with polishing discs significantly decreased staining when compared to the groups that used polishing discs alone, for all restorative materials tested. The highest color change values were obtained for the specimens that were polished with the Biscover liquid polish

  1. Effects of polishing procedures on color stability of composite resins

    Directory of Open Access Journals (Sweden)

    Ahmet Umut Güler

    2009-04-01

    Full Text Available The purpose of this study was to investigate the effect of different polishing methods on color stability of posterior, universal and nanohybrid composite resin restorative materials upon exposure to a staining agent. Twenty-five specimens were prepared for each of 5 different composite resins (Filtek Z250, Filtek P60, Quadrant LC, Grandio and Filtek Supreme. Specimens were divided into 5 groups and different polishing procedures, including polishing discs (Pd, polishing discs then diamond polishing paste (PdP, polishing discs then a liquid polishing system (Biscover (PdB, and combinations of these (PdPB were used. Unpolished specimens served as the control (C. The specimens were stored for 48 h in a coffee solution. The color of all specimens was measured before and after exposure with a colorimeter, and total color change (DE* were calculated. The data were analyzed with a two-way ANOVA and the means were compared by Tukey HSD test (a=0.05. The lowest color difference was observed in the groups PdP and C, while the highest color difference was observed in PdPB, and PdB. When comparing the five different restorative materials, no significant difference was observed between FiltekP60 and FiltekZ250, and these materials demonstrated significantly less color change than Quadrant LC and the nanohybrid materials (Grandio, Filtek Supreme. The posterior (Filtek P60 and universal (Filtek Z250 composite resin restorative materials, which do not contain tetraethyleneglycol dimethacrylate (TEGDMA, were found to be less stainable than the nanohybrid (Grandio, Filtek Supreme and universal (Quadrant LC composite resins, which contain TEGDMA. The use of diamond polishing paste after polishing with polishing discs significantly decreased staining when compared to the groups that used polishing discs alone, for all restorative materials tested. The highest color change values were obtained for the specimens that were polished with the Biscover liquid polish

  2. Anatomical structure of Polystichum Roth ferns rachises

    Directory of Open Access Journals (Sweden)

    Oksana V. Tyshchenko

    2012-03-01

    Full Text Available The morpho-anatomical characteristics of rachis cross sections of five Polystichum species is presented. The main and auxiliary anatomical features which help to distinguish investigated species are revealed.

  3. [Cellular subcutaneous tissue. Anatomic observations].

    Science.gov (United States)

    Marquart-Elbaz, C; Varnaison, E; Sick, H; Grosshans, E; Cribier, B

    2001-11-01

    We showed in a companion paper that the definition of the French "subcutaneous cellular tissue" considerably varied from the 18th to the end of the 20th centuries and has not yet reached a consensus. To address the anatomic reality of this "subcutaneous cellular tissue", we investigated the anatomic structures underlying the fat tissue in normal human skin. Sixty specimens were excised from the surface to the deep structures (bone, muscle, cartilage) on different body sites of 3 cadavers from the Institut d'Anatomie Normale de Strasbourg. Samples were paraffin-embedded, stained and analysed with a binocular microscope taking x 1 photographs. Specimens were also excised and fixed after subcutaneous injection of Indian ink, after mechanic tissue splitting and after performing artificial skin folds. The aspects of the deep parts of the skin greatly varied according to their anatomic localisation. Below the adipose tissue, we often found a lamellar fibrous layer which extended from the interlobular septa and contained horizontally distributed fat cells. No specific tissue below the hypodermis was observed. Artificial skin folds concerned either exclusively the dermis, when they were superficial or included the hypodermis, but no specific structure was apparent in the center of the fold. India ink diffused to the adipose tissue, mainly along the septa, but did not localise in a specific subcutaneous compartment. This study shows that the histologic aspects of the deep part of the skin depend mainly on the anatomic localisation. Skin is composed of epidermis, dermis and hypodermis and thus the hypodermis can not be considered as being "subcutaneous". A difficult to individualise, fibrous lamellar structure in continuity with the interlobular septa is often found under the fat lobules. This structure is a cleavage line, as is always the case with loose connective tissues, but belongs to the hypodermis (i.e. fat tissue). No specific tissue nor any virtual space was

  4. There Is No Knowledge Without Terminology. How Terminological Methods and Tools Can Help to Manage Monolingual and Multilingual Knowledge and Communication

    Directory of Open Access Journals (Sweden)

    Gabriele Sauberer

    2011-04-01

    Full Text Available The paper presents “10 good reasons for terminology” in any expert field and any language(s by discussing the areas of application in the public and the private sector as well as in science and education. After a short introduction on the history of terminology, the term “ontology” will be discussed, as one of the key terms in current knowledge engineering and terminology. The paper gives an overview on means and methods of assuring and improving the quality of knowledge generation, communication and management through terminology. Also, it introduces the main standards, players and experts in the terminology community, such as the International Network for Terminology (www.termnet.org.

  5. Advanced space optics development in freeform optics design, ceramic polishing, rapid and extreme freeform polishing

    Science.gov (United States)

    Geyl, R.; Leplan, H.; Ruch, E.

    2017-09-01

    In this paper Safran-Reosc wants to share with the space community its recent work performed in the domain of space optics. Our main topic is a study about the advantages that freeform optical surfaces can offer to advanced space optics in term of compactness or performances. We have separated smart and extreme freeform in our design exploration work. Our second topic is to answer about the immediate question following: can we manufacture and test these freeform optics? We will therefore present our freeform optics capability, report recent achievement in extreme aspheric optics polishing and introduce to the industrialisation process of large off axis optics polishing for the ESO Extremely Large Telescope primary mirror segments. Thirdly we present our R-SiC polishing layer technology for SiC material. This technique has been developed to reduce costs, risks and schedule in the manufacturing of advanced SiC optics for Vis and IR applications.

  6. Rufus of Ephesus and his contribution to the development of anatomical nomenclature.

    Science.gov (United States)

    Bujalkova, Maria

    2011-01-01

    Rufus of Ephesus, a famous ancient physician, lived about the years 80 - 150 CE. His theories stressed the importance of anatomy and he preferred pragmatic approach to diagnosis and treatment. In his work "On the Names of the Parts of the Human Body", he put in pragmatic effort to make a lexicon of anatomy for his pupils. In the introduction, he described it as a manual for the students of medical art which relied on demonstration in teaching; visible (outer) parts of the body were shown on a demonstrator and invisible (inner) parts were shown on a dissected monkey. The brief explanation of the anatomical terms includes position, shape, and functions of organs, and this is what makes his work a pioneering effort to explain the anatomy clearly, systematically, and using consistent terminology. Rufus stressed the importance of exact nomenclature to prevent misunderstandings in medical practice. This anatomy manual had a major influence on the development of anatomical terminology. It is an important contribution to the history of teaching. The other essential contribution of Rufus' lexicon (also known for its briefer title Onomastikon) is that the author recognised and critically reviewed the knowledge and views of his predecessors, physicians of the pre-Galenic period. No less important was his teaching to anatomists and physicians who followed, as they often cited or paraphrased Rufus in their own works (Galen, Oribasius). Many fragments of Rufus' work have been preserved by medieval Arabic medical writers, especially by Rhazes.

  7. Hydrodynamic modelling in the Polish Zone of the Baltic Sea - an overview of Polish achievements

    Directory of Open Access Journals (Sweden)

    Ewa Jasińska

    2003-03-01

    Full Text Available This paper gives a general overview of Polish experience and achievements with regard to hydrodynamic modelling in the Polish zone of the Baltic Sea. The first work started already at the end of the sixties when the first 1D and 2D hydrodynamic models were set up. With the development of numerical methods and increasing computational power a number of 1D, 2D and 3D models were set up and tested. Global, regional and local models cover the most important water bodies,i.e. the Pomeranian Bay - Szczecin Lagoon and Gulf of Gdansk - Vistula Lagoon systems.

  8. Terminology Guideline for Classifying Offshore Wind Energy Resources

    Energy Technology Data Exchange (ETDEWEB)

    Beiter, Philipp [National Renewable Energy Lab. (NREL), Golden, CO (United States); Musial, Walt [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-09-01

    The purpose of this guideline is to establish a clear and consistent vocabulary for conveying offshore wind resource potential and to interpret this vocabulary in terms that are familiar to the oil and gas (O&G) industry. This involves clarifying and refining existing definitions of offshore wind energy resource classes. The terminology developed in this guideline represents one of several possible sets of vocabulary that may differ with respect to their purpose, data availability, and comprehensiveness. It was customized to correspond with established offshore wind practices and existing renewable energy industry terminology (e.g. DOE 2013, Brown et al. 2015) while conforming to established fossil resource classification as best as possible. The developers of the guideline recognize the fundamental differences that exist between fossil and renewable energy resources with respect to availability, accessibility, lifetime, and quality. Any quantitative comparison between fossil and renewable energy resources, including offshore wind, is therefore limited. For instance, O&G resources are finite and there may be significant uncertainty associated with the amount of the resource. In contrast, aboveground renewable resources, such as offshore wind, do not generally deplete over time but can vary significantly subhourly, daily, seasonally, and annually. The intent of this guideline is to make these differences transparent and develop an offshore wind resource classification that conforms to established fossil resource classifications where possible. This guideline also provides methods to quantitatively compare certain offshore wind energy resources to O&G resource classes for specific applications. Finally, this guideline identifies areas where analogies to established O&G terminology may be inappropriate or subject to misinterpretation.

  9. Tribological approach to study polishing of road surface under traffic

    OpenAIRE

    KANE, Malal; DO, Minh Tan

    2007-01-01

    The polishing phenomenon of road pavements under the vehicle traffic constitutes the main mechanism inherent to the loss of skid resistance over time. A better understanding of this phenomenon would allow an improvement of road safety. This study comprises a review of laboratory test and a model simulating the polishing of road surfaces. The laboratory test uses a polishing machine so called 'Wehner-Schulze' which can reproduce the evolution of the road texture from specimens taken directly f...

  10. Polish Phoneme Statistics Obtained On Large Set Of Written Texts

    Directory of Open Access Journals (Sweden)

    Bartosz Ziółko

    2009-01-01

    Full Text Available The phonetical statistics were collected from several Polish corpora. The paper is a summaryof the data which are phoneme n-grams and some phenomena in the statistics. Triphonestatistics apply context-dependent speech units which have an important role in speech recognitionsystems and were never calculated for a large set of Polish written texts. The standardphonetic alphabet for Polish, SAMPA, and methods of providing phonetic transcriptions are described.

  11. Product/Service-Systems: Proposal for models and terminology

    DEFF Research Database (Denmark)

    Matzen, Detlef; Tan, Adrian; Andreasen, Mogens Myrup

    2005-01-01

    the environmental impacts of human consumption activity or optimise a company’s ability to cope with the influences arising from the emerging globalisation of economic and business activities. Since there has not been worked on a coherent terminology for the terms and concepts used in PSS research, the area remains...... very blurred and ill defined. This paper will try to identify the fundamental characteristics of PSS and propose a system of concepts that can be used to describe and discuss the phenomenon, for the purpose of developing new PSS solutions. Coming from a tradition of product development research...

  12. The key to technical translation, v.2 terminology/lexicography

    CERN Document Server

    Hann, Michael

    1992-01-01

    This handbook for German/English/German technical translators at all levels from student to professional covers the root terminologies of the spectrum of scientific and engineering fields. The work is designed to give technical translators direct insight into the main error sources occurring in their profession, especially those resulting from a poor understanding of the subject matter and the usage of particular terms to designate different concepts in different branches of technology. The style is easy to read and suitable for nonnative English speakers and translators with no engineering ex

  13. Rita Temmerman. Towards New Ways of Terminology Description: The Sociocognitive Approach

    Directory of Open Access Journals (Sweden)

    Rosemarie Gläser

    2011-10-01

    Full Text Available This book appeared as Volume 3 in the Series Terminology and Lexicography Research and Practice edited by Helmi Sonneveld and Sue-Ellen Wright. The author, Rita Temmerman, presently working at the Erasmus Hogeschool, Brussels and specialising in problems of terminology in various domains of the life sciences, presents a polemical, stimulating and innovative monograph which continues and deepens her previous research work. Her doctoral dissertation (Louvain 1998 focused on Terminology Beyond Standardisation: Language and Categorisation in the Life Sciences. The aim of the book under review, Towards New Ways of Terminology Description: The Sociocognitive Approach, is to elaborate a new theory, method and application of terminology research which seeks to overcome the obvious limitations of traditional terminology as chiefly represented by the Vienna School (Eugen W?ster, Helmut Felber, Infoterm and associated institutions.

  14. Preparing polished crystal slices with high precision orientation

    DEFF Research Database (Denmark)

    Mathiesen, S. Ipsen; Gerward, Leif; Pedersen, O.

    1974-01-01

    A polishing procedure is described which utilizes a high precision Laue technique for crystal orientation. Crystal slices with their final polished surfaces parallel to a crystallographic plane within 0.02° can be prepared. ©1974 The American Institute of Physics......A polishing procedure is described which utilizes a high precision Laue technique for crystal orientation. Crystal slices with their final polished surfaces parallel to a crystallographic plane within 0.02° can be prepared. ©1974 The American Institute of Physics...

  15. Visible Light Activated Photocatalytic Water Polishing System, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — This proposal targets development of a LED light activated photocatalytic water polishing system that enables reduction of organic impurities (TOC and...

  16. Assessing operability of a novel polisher arrangement using MMS

    International Nuclear Information System (INIS)

    Shor, S.W.W.

    1987-01-01

    A condensate polisher is intended to remove both particulate matter and ionic material from the condensate. Condensate polishers have normally been placed directly in the condensate system downstream of the condensate pumps. This inline location has certain disadvantages. These disadvantages are discussed. Placing the polisher in a sidestream location, where water is removed from the condensate system, pumped through the polisher, and then returned to the condensate system provides a solution to these disadvantages. Several possible types of sidestream installations is described. This has a polisher taking unpolished condensate from one compartment from one compartment of a divided hotwell in a specially modified condenser and returning polished condensate to the other compartment. The polisher is supplied by its own dedicated pumps, which have a head requirement sufficient only to overcome the pressure drop through the polisher circuit at a flow rate of 110% of maximum condensate flow. This concept is very attractive but has not yet been tested even though it is being installed in several new units. A simulation was, therefore, performed using MMS to provide confidence that this particular sidestream polisher arrangement was operationally viable

  17. Modeling Integration and Reuse of Heterogeneous Terminologies in Faceted Browsing Systems

    OpenAIRE

    Harris, Daniel R.

    2016-01-01

    We integrate heterogeneous terminologies into our category-theoretic model of faceted browsing and show that existing terminologies and vocabularies can be reused as facets in a cohesive, interactive system. Commonly found in online search engines and digital libraries, faceted browsing systems depend upon one or more taxonomies which outline the structure and content of the facets available for user interaction. Controlled vocabularies or terminologies are often externally curated and are av...

  18. Improving information retrieval with multiple health terminologies in a quality-controlled gateway.

    Science.gov (United States)

    Soualmia, Lina F; Sakji, Saoussen; Letord, Catherine; Rollin, Laetitia; Massari, Philippe; Darmoni, Stéfan J

    2013-01-01

    The Catalog and Index of French-language Health Internet resources (CISMeF) is a quality-controlled health gateway, primarily for Web resources in French (n=89,751). Recently, we achieved a major improvement in the structure of the catalogue by setting-up multiple terminologies, based on twelve health terminologies available in French, to overcome the potential weakness of the MeSH thesaurus, which is the main and pivotal terminology we use for indexing and retrieval since 1995. The main aim of this study was to estimate the added-value of exploiting several terminologies and their semantic relationships to improve Web resource indexing and retrieval in CISMeF, in order to provide additional health resources which meet the users' expectations. Twelve terminologies were integrated into the CISMeF information system to set up multiple-terminologies indexing and retrieval. The same sets of thirty queries were run: (i) by exploiting the hierarchical structure of the MeSH, and (ii) by exploiting the additional twelve terminologies and their semantic links. The two search modes were evaluated and compared. The overall coverage of the multiple-terminologies search mode was improved by comparison to the coverage of using the MeSH (16,283 vs. 14,159) (+15%). These additional findings were estimated at 56.6% relevant results, 24.7% intermediate results and 18.7% irrelevant. The multiple-terminologies approach improved information retrieval. These results suggest that integrating additional health terminologies was able to improve recall. Since performing the study, 21 other terminologies have been added which should enable us to make broader studies in multiple-terminologies information retrieval.

  19. Plasma electrolytic polishing of metalized carbon fibers

    Directory of Open Access Journals (Sweden)

    Falko Böttger-Hiller

    2016-02-01

    Full Text Available Efficient lightweight structures require intelligent materials that meet versatile functions. Especially, carbon-fiber-reinforced polymers (CFRPs are gaining relevance. Their increasing use aims at reducing energy consumption in many applications. CFRPs are generally very light in weight, while at the same time being extremely stiff and strong (specific strength: CFRPs: 1.3 Nm kg–1, steel: 0.27 Nm kg–1; specific stiffness: CFRPs: 100 Nm kg–1, steel: 25 Nm kg–1. To increase performance and especially functionality of CFRPs, the integration of microelectronic components into CFRP parts is aspired. The functionalization by sensors, actuators and electronics can enable a high lightweight factor and a new level of failure-safety. The integration of microelectronic components for this purpose requires a working procedure to provide electrical contacts for a reliable connection to energy supply and data interfaces. To overcome this challenge, metalized carbon fibers are used. Metalized fibers are, similar to the usual reinforcing fibers, able to be soldered and therefore easy to incorporate into CFRPs. Unfortunately, metalized fibers have to be pre-treated by flux-agents. Until now, there is no flux which is suitable for mass production without destroying the polymer of the CFRP. The process of plasma electrolytic polishing (PeP could be an option, but is so far not available for copper. Thus, in this study, plasma electrolytic polishing is transferred to copper and its alloys. To achieve this, electrolytic parameters as well as the electrical setup are adapted. It can be observed that the gloss and roughness can be adjusted by means of this procedure. Finally, plasma electrolytic polishing is used to treat thin copper layers on carbon fibers.

  20. Utilization management in anatomic pathology.

    Science.gov (United States)

    Lewandrowski, Kent; Black-Schaffer, Steven

    2014-01-01

    There is relatively little published literature concerning utilization management in anatomic pathology. Nonetheless there are many utilization management opportunities that currently exist and are well recognized. Some of these impact only the cost structure within the pathology department itself whereas others reduce charges for third party payers. Utilization management may result in medical legal liabilities for breaching the standard of care. For this reason it will be important for pathology professional societies to develop national utilization guidelines to assist individual practices in implementing a medically sound approach to utilization management. © 2013.

  1. Competence of Irish and Polish Teachers in the Opinions of Young Polish Immigrants in Ireland

    Science.gov (United States)

    Augustyniak, Joanna

    2016-01-01

    Since 2004, Ireland has experienced the arrival of immigrants from various countries from all over the world including Poland. The Polish came to Ireland with their families including children of school age obliged to attend compulsory education. These children have attended schools dissimilar from the ones they are accustomed to in their home…

  2. Wind Directions in the Polish Tatras,

    Science.gov (United States)

    1982-01-26

    The study of anemometric conditions in the iatra Aoun- tains with the usually available observation data presents a rather difficult problem for two...year are presented in Table 2 and Fig. 1. Analysis of the anemometric conditions in the Polish Ta- tras and at 2odhale, on the basis of the observational...Vol. 29, 1947. 9. Milata, W. "The Foehn," Wierchy, Vol. 20, 1950. 10. Orlicz, M. " Anemometric Conditions on Peaks in the 2atras," Wiad. Sluzhby Hydro

  3. Polish students' opinion about medicinal cannabis

    OpenAIRE

    Mazur, Rafał; Masternak, Sebastian; Pająk, Michał; Parszewska, Katarzyna; Skórzyńska-Dziduszko, Katarzyna

    2017-01-01

    Mazur Rafał, Masternak Sebastian, Pająk Michał, Parszewska Katarzyna, Skórzyńska-Dziduszko Katarzyna. Polish students’ opinion about medicinal cannabis. Journal of Education, Health and Sport. 2017;7(9):233-242. eISSN 2391-8306. DOI http://dx.doi.org/10.5281/zenodo.894710 http://ojs.ukw.edu.pl/index.php/johs/article/view/4839 The journal has had 7 points in Ministry of Science and Higher Education parametric evaluation. Part B item 1223 (26....

  4. The GRAIL concept modelling language for medical terminology.

    Science.gov (United States)

    Rector, A L; Bechhofer, S; Goble, C A; Horrocks, I; Nowlan, W A; Solomon, W D

    1997-02-01

    The GALEN representation and integration language (GRAIL) has been developed to support effective clinical user interfaces and extensible re-usable models of medical terminology. It has been used successfully to develop the prototype GALEN common reference (CORE) model for medical terminology and for a series of projects in clinical user interfaces within the GALEN and PEN&PAD projects. GRAIL is a description logic or frame language with novel features to support part-whole and other transitive relations and to support the GALEN modelling style aimed at re-use and application independence. GRAIL began as an experimental language. However, it has clarified many requirements for an effective knowledge representation language for clinical concepts. It still has numerous limitations despite its practical successes. The GRAIL experience is expected to form the basis for future languages which meet the same requirements but have greater expressiveness and more soundly based semantics. This paper provides a description and motivation for the GRAIL language and gives examples of the modelling paradigm which it supports.

  5. Terminology for interprofessional collaboration: definition and current practice.

    Science.gov (United States)

    Mahler, Cornelia; Gutmann, Thomas; Karstens, Sven; Joos, Stefanie

    2014-01-01

    Interprofessional collaboration leads to an improvement in health care. This call for increased interprofessional collaboration has led to national and international recommendations for interprofessional learning and education. The GMA has taken up this challenge and has implemented a working group on "interprofessional education in the health professions" to address this topic. The terminology used to describe collaboration among the health professions seems to vary and does not reflect any clear consensus. The aim of this paper is to identify the different terms used to describe collaboration between health professions and to analyse their use in German journals. The terms frequently used to describe collaboration between health professionals were identified and defined. German medical journals were then pragmatically analyzed regarding the use of the terms interprof* and interdiszip*. The German terms for interprofessional and interdisciplinary were not used consistently in the journals reviewed. There seems to be no agreement on the use of terms to describe the collaboration between health professions. Consistent terminology should be used as a basis for promoting collaboration and improving understanding among the parties involved.

  6. STANDARDIZED TERMINOLOGY OF ADULT SPINE DEFORMITY FOR BRAZILIAN PORTUGUESE

    Directory of Open Access Journals (Sweden)

    Raphael de Rezende Pratali

    2015-12-01

    Full Text Available Objective : To develop a consensus for translation of the most relevant terms used in the study of Adult Spinal Deformity, from their original languages into Brazilian Portuguese. Methods : A panel of 12 experts in spine surgery from the five Brazilian regions was constituted. To obtain the standardization of terminology, the Delphi method with an electronic questionnaire was administered to participants about their opinion on the translation of 13 relevant terms chosen by literature review. Each term was considered standard when there was consensus, that is, concordance higher than 80% among participants as to the suggestion to be adopted, and then on the acceptance of the term and its abbreviation in Portuguese. Results : Initially there was consensus (over 80% concordance on the translation of seven terms in the electronic questionnaire. The other six terms that have not reached consensus were discussed at a meeting among the participants, relying on the opinion of a specialized professional in simultaneous translation of orthopedic terms in Portuguese and other professional majored in Portuguese language. It was decided how these terms should be translated and there was a consensus among all participants regarding their acceptance. Finally, there was consensus among the participants, who agreed with the translation and abbreviation of the 13 propose terms, defining its standardization for Brazilian Portuguese. Conclusion : We present a standard terminology used in the study of Adult Spinal Deformity through consensus among experts, seeking uniformity in the use of these terms in Brazilian Portuguese.

  7. Musical Shaping Gestures: Considerations about Terminology and Methodology

    Directory of Open Access Journals (Sweden)

    Elaine King

    2013-12-01

    Full Text Available Fulford and Ginsborg's investigation into non-verbal communication during music rehearsal-talk between performers with and without hearing impairments extends existing research in the field of gesture studies by contributing significantly to our understanding of musicians' physical gestures as well as opening up discussion about the relationship between speech, sign and gesture in discourse about music. Importantly, the authors weigh up the possibility of an emerging sign language about music. This commentary focuses on three key considerations in response to their paper: first, use of terminology in the study of gesture, specifically about 'musical shaping gestures' (MSGs; second, methodological issues about capturing physical gestures; and third, evaluation of the application of gesture research beyond the rehearsal context. While the difficulties of categorizing gestures in observational research are acknowledged, I indicate that the consistent application of terminology from outside and within the study is paramount. I also suggest that the classification of MSGs might be based upon a set of observed physical characteristics within a single gesture, including size, duration, speed, plane and handedness, leading towards an alternative taxonomy for interpreting these data. Finally, evaluation of the application of gesture research in education and performance arenas is provided.

  8. Conversion disorder: A systematic review of current terminology.

    Science.gov (United States)

    Ding, Juen Mei; Kanaan, Richard Antony Alexander

    It has been argued that the label given to unexplained neurological symptoms is an important contributor to their often poor acceptance, and there has been recent debate on proposals to change the name from conversion disorder. There have been multiple studies of layperson and clinician preference and this article aimed to review these. Multiple databases were searched using terms including "conversion disorder" and "terminology", and relative preferences for the terms extracted. Seven articles were found which looked at clinician or layperson preferences for terminology for unexplained neurological symptoms. Most neurologists favoured terms such as "functional" and "psychogenic", while laypeople were comfortable with "functional" but viewed "psychogenic" as more offensive; "non-epileptic/organic" was relatively popular with both groups. "Functional" is a term that is relatively popular with both clinicians and the public. It also meets more of the other criteria proposed for an acceptable label than other popular terms - however the views of neither psychiatrists nor actual patients with the disorder were considered. Copyright © 2016 Elsevier Inc. All rights reserved.

  9. Ancient Greek Terminology in Hepatopancreatobiliary Anatomy and Surgery.

    Science.gov (United States)

    Papoulas, Michail; Douvetzemis, Stergios

    2015-08-01

    Most of the terminology in medicine originates from Greek or Latin, revealing the impact of the ancient Greeks on modern medicine. However, the literature on the etymology of Greek words used routinely in medical practice is sparse. We provide a short guide to the etymology and meaning of Greek words currently used in the field of hepatopancreatobiliary (HPB) anatomy and surgery. Focusing on HPB medical literature, the etymology and origin of Greek words including suffixes and prefixes are shown and analyzed. For example, anatomy (anatomia) is a Greek word derived from the prefix ana- (on, upon) and the suffix -tomy from the verb temno meaning to cut. Surgery, however, is not a Greek word. The corresponding Greek word is chirourgiki derived from cheir (hand) and ergon (action, work) meaning the action made by hands. Understanding the root of Greek terminology leads to an accurate, precise and comprehensive scientific medical language, reflecting the need for a universal medical language as a standardized means of communication within the health care sector.

  10. Group word terms in the terminology of the theory of mechanics in Albanian and English

    OpenAIRE

    GANI PLLANA; SADETE PLLANA

    2013-01-01

    As it is known, the terminology of any knowledge field as an independent system, as well as the terminology of mechanics consisting of nominating one-word and group word units (among which, particularly the latter phrase terms) make up nearly 70-80% of the overall terminological vocabulary. Looking at it from this point of view, all monosyllabic (one word) terms (word terms) would also be accepted as a basic vocabulary in the terminology of mechanics. This can be justified more so by the fact...

  11. Foundations of Intonational Meaning: Anatomical and Physiological Factors.

    Science.gov (United States)

    Gussenhoven, Carlos

    2016-04-01

    Like non-verbal communication, paralinguistic communication is rooted in anatomical and physiological factors. Paralinguistic form-meaning relations arise from the way these affect speech production, with some fine-tuning by the cultural and linguistic context. The effects have been classified as "biological codes," following the terminological lead of John Ohala's Frequency Code. Intonational morphemes, though arguably non-arbitrary in principle, are in fact heavily biased toward these paralinguistic meanings. Paralinguistic and linguistic meanings for four biological codes are illustrated. In addition to the Frequency Code, the Effort Code, and the Respiratory Code, the Sirenic Code is introduced here, which is based on the use of whispery phonation, widely seen as being responsible for the signaling and perception of feminine attractiveness and sometimes used to express interrogativity in language. In the context of the evolution of language, the relations between physiological conditions and the resulting paralinguistic and linguistic meanings will need to be clarified. Copyright © 2016 The Authors. Topics in Cognitive Science published by Wiley Periodicals, Inc. on behalf of Cognitive Science Society.

  12. Standards of the Polish Ultrasound Society – update. Sonography of the lower extremity veins

    Directory of Open Access Journals (Sweden)

    Grzegorz Małek

    2014-09-01

    Full Text Available This article has been prepared on the basis of the Ultrasonography Standards of the Polish Ultrasound Society (2011 and updated based on the latest findings and reports. Ultrasound examination of the lower extremity veins is relatively easy and commonly used to confirm or rule out venous thrombosis. However, a relatively easy compression test frequently requires experience, particularly in situations when imaging is difficult (due to lymphedema, dressing or thick tissues. The technique is time-consuming and requires assessment of each deep vein every 1 cm. Lesions in the deep veins cannot be ruled out when the vessels are assessed in only 2–3 points – a full examination is needed. The value of the method is the highest when the proximal section is assessed and the lowest when crural veins are evaluated. Doppler sonography is the basic method used when patients are prepared for a surgery of varicose veins. The assessment of the superficial veins prior to this procedure is tedious and requires knowledge of anatomy together with numerous variants. A considerable challenge is posed by re-assessment of recurrent varicose veins following a previous surgery. The Standards include anatomic nomenclature proposed by the Polish Society for Vascular Surgery and Polish Society of Phlebology, which should facilitate communication with clinicians. The most beneficial patient positions have been thoroughly discussed in terms of safety and effectiveness of the examination. Sometimes during such an examination, no venous pathology is found, but other changes with symptoms that suggest deep thrombophlebitis are detected. In such a situation, it is necessary to conduct an initial (or complete, if possible assessment of lesions as well as provide recommendations connected with further, more detailed diagnosis.

  13. Standards of the Polish Ultrasound Society – update. Sonography of the lower extremity veins

    Science.gov (United States)

    Nowicki, Andrzej

    2014-01-01

    This article has been prepared on the basis of the Ultrasonography Standards of the Polish Ultrasound Society (2011) and updated based on the latest findings and reports. Ultrasound examination of the lower extremity veins is relatively easy and commonly used to confirm or rule out venous thrombosis. However, a relatively easy compression test frequently requires experience, particularly in situations when imaging is difficult (due to lymphedema, dressing or thick tissues). The technique is time-consuming and requires assessment of each deep vein every 1 cm. Lesions in the deep veins cannot be ruled out when the vessels are assessed in only 2–3 points – a full examination is needed. The value of the method is the highest when the proximal section is assessed and the lowest when crural veins are evaluated. Doppler sonography is the basic method used when patients are prepared for a surgery of varicose veins. The assessment of the superficial veins prior to this procedure is tedious and requires knowledge of anatomy together with numerous variants. A considerable challenge is posed by re-assessment of recurrent varicose veins following a previous surgery. The Standards include anatomic nomenclature proposed by the Polish Society for Vascular Surgery and Polish Society of Phlebology, which should facilitate communication with clinicians. The most beneficial patient positions have been thoroughly discussed in terms of safety and effectiveness of the examination. Sometimes during such an examination, no venous pathology is found, but other changes with symptoms that suggest deep thrombophlebitis are detected. In such a situation, it is necessary to conduct an initial (or complete, if possible) assessment of lesions as well as provide recommendations connected with further, more detailed diagnosis. PMID:26675992

  14. The Evaluation of Efficiency of Polish Agriculture

    Directory of Open Access Journals (Sweden)

    Piotr Bórawski

    2015-01-01

    Full Text Available The objective of the paper was to recognize the efficiency of Polish agriculture. We have studied data from Main Statistical Office (MSO and compared the efficiency in the years 2000–2010. The data proved that the efficiency of Polish agriculture improved in the analyzed period. To measure the impact of macroeconomic variables we introduced these into the regression model. The macroeconomic factors included: X1 (nominal prices of land, X2 (land prices expressed in dt, X3 (inflation, X4 (investment in agriculture and hunting, X5 (balance of trade and X6 (GDP. We wanted to recognize the impact of macroeconomic factors on: Y1 (gross output, Y2 (intermediate consumption, Y3 (gross value added. Multiple regression was used to measure the impact of macroeconomic factors on global production of agriculture. The strongest impact on gross value added had: X4 (investment in agriculture and horticulture and X4 (trade balance. Poland is a member of European Union and the Common Agricultural Policy has improved the situation in agriculture. There are about 2 100 000 farms in Poland but only 300 000–400 000 are producing for the market. Other farms have social functions and are place for work for rural inhabitants.

  15. Food patterns of Polish older people

    DEFF Research Database (Denmark)

    Wadolowska, L.; Danowska-Oziewicz, M.; Niedzwiedzka, E.

    2006-01-01

    Food patterns of Polish older people were separated and described. The research included 422 people aged 65+ years, living in 5 geographical locations. Participants of the study were selected in quota sampling. Criteria for recruitment included sex, age (65-^74 or 75+ years) and family status (li...... and small number of products fonning joint food patterns speak in advocacy of relatively small reciprocal relationship between different food items consumed by the seniors in Poland.......Food patterns of Polish older people were separated and described. The research included 422 people aged 65+ years, living in 5 geographical locations. Participants of the study were selected in quota sampling. Criteria for recruitment included sex, age (65-^74 or 75+ years) and family status...... (living alone or living with other people). Respondents were asked questions about consumption of 55 food products. The factor analysis allowed for separating 21 food patterns. They included from 1 to 3 groups of products, intake of which was mutually dependant. Big number of separated food patterns...

  16. Farmers' pensions and the Polish economic crisis.

    Science.gov (United States)

    Simanis, J G

    1983-04-01

    The Polish Government, in 1977, inaugurated a new pension program that made old-age and invalidity benefits available for the first time to most farmers in that country. The evolution and eventual failure of that program were closely intertwined with a growing national economic crisis, manifested in widespread popular unrest and culminating in emergence of the Solidarity movement. The farmers' pension program was originally presented as both a social security measure and a vehicle for improving agricultural efficiency. The economic situation was expected to benefit as farms of older owners were passed to younger, presumably more efficient, successors, with the state sometimes acting as intermediary. A further step to bind the social security concept to agricultural efficiency came through relating the pension amount to the quantity of produce the individual farmer sold to the state over a number of years. The failure of these provisions and other unpopular features of the new program was aggravated by inflation and continuing deterioration of the Polish economy.

  17. Robotic Automation in Computer Controlled Polishing

    Science.gov (United States)

    Walker, D. D.; Yu, G.; Bibby, M.; Dunn, C.; Li, H.; Wu, Y.; Zheng, X.; Zhang, P.

    2016-02-01

    We first present a Case Study - the manufacture of 1.4 m prototype mirror-segments for the European Extremely Large Telescope, undertaken by the National Facility for Ultra Precision Surfaces, at the OpTIC facility operated by Glyndwr University. Scale-up to serial-manufacture demands delivery of a 1.4 m off-axis aspheric hexagonal segment with surface precision use of robots to automate currently-manual operations on CNC polishing machines, to improve work-throughput, mitigate risk of damage to parts, and reduce dependence on highly-skilled staff. Second is the use of robots to pre-process surfaces prior to CNC polishing, to reduce total process time. The third draws the threads together, describing our vision of the automated manufacturing cell, where the operator interacts at cell rather than machine level. This promises to deliver a step-change in end-to-end manufacturing times and costs, compared with either platform used on its own or, indeed, the state-of-the-art used elsewhere.

  18. Analytic tendencies in modern Polish and Russian

    Directory of Open Access Journals (Sweden)

    Wojciech Sosnowski

    2015-11-01

    Full Text Available Analytic tendencies in modern Polish and Russian Modern Polish and Russian are characterized by some features which demonstrate an increasing level of analitism. In the process of transformation from synthetic to analytical language, a crucial role is played by prepositional units. In this research, analitism is understood in a traditional way as a morphological and syntactic phenomenon. The fact that the synthetic structure of a language may, in some conditions, turn into an analytical one, as happened in the case of Bulgarian and Macedonian, has been intriguing linguists ever since, and has made me attempt to answer the question: What is the condition of modern Polish and Russian, which are languages with a rich literary tradition and solid grammatical norms, which belong to a group of synthetic languages? The analytical tendencies in morphology include the following: a decrease in the number of cases in all inflected parts of speech; a more frequent use of uninflected nouns and adjectives; the growing importance of nouns with common gender, and, in particular, the use of forms of masculine gender to depict feminine gender; differences in expressing collectiveness in a group of nouns (using collective meaning for forms that have singular meaning; substituting case forms with prepositions; substituting case forms with subordinate clauses; substituting case forms with “helper” words. Analytical tendencies in the area of numeral functioning include: substituting inflected forms of ordinal numerals with cardinal ones; the gradual disappearing inflection of numerals; confusing the forms of noun cases after numerals; the disappearing declination of collective numerals; displacing other cases with so-called simple cases; changing the syntactical position which the numeral should be inflected in; abandoning the declination of first elements of collective numerals. During the study of analytic tendencies in morphology, it was necessary to examine

  19. Global Citizenship Education in School Curricula. A Polish Perspective

    Science.gov (United States)

    Leek, Joanna

    2016-01-01

    The purpose of this study is to present global citizenship education from a Polish perspective. Analyzing the issue, the first part of this paper presents the development of citizenship education, followed by the current status of global citizenship education in Polish schools. In the second part of the study I draw attention to national curricula…

  20. Comparative study of performance of shoe polishes formulated from ...

    African Journals Online (AJOL)

    Polyethylene pigment was generated from “pure water sachets” (one of the major environmental nuisance today) and used in the formulation of shoe polish using paraffin wax, white spirit, turpentine oil, and nitrocellulose. The polish was found to exhibit similar wrinkle resistance, inferior gloss, rub resistance; resistance to ...

  1. Polish anthropology on the eve of the new millennium

    OpenAIRE

    Drozdowski, Zbigniew

    1999-01-01

    Author summarizes the main achievements of Polish anthropology in the 20th century, presents the main research problems of this discipline in contemporary Poland and points at the potential dangers which may be faced by Polish anthropology in the forthcoming years.

  2. Influence of melt treatments and polished CVD diamond coated ...

    Indian Academy of Sciences (India)

    Performances of the turning inserts (uncoated and polished CVD diamond coated) were evaluated in machining Al–7Si and Al–7Si–2.5Cu cast alloys under dry environment using a lathe. The polished CVD diamond coated insert outperformed the uncoated cutting insert which suffered from sizeable edge buildup leading to ...

  3. Social Obstacles Towards Success of Pupils in Polish Primary Schools.

    Science.gov (United States)

    Nakielska, Zofia

    In 1973, the Polish Minister of Education ordered objective competitions at the primary school level in the fields of Polish studies, Russian language, and math. In order to determine whether such subject competitions were justified and if they contributed equally to the development of interests and abilities among the rural and urban and…

  4. Etymology in the Polish Academy of Sciences Great Dictionary of ...

    African Journals Online (AJOL)

    The article offers an insight into etymological information provided in the Polish Academy of Sciences Great Dictionary of Polish (Pol. Wielki słownik języka polskiego PAN, WSJP PAN). The dictionary and the rules of producing the entries are briefly presented. These rules influence the way of working on etymology within ...

  5. The Czechoslovak-Polish Club in Brno (1925–1939)

    Czech Academy of Sciences Publication Activity Database

    Baron, Roman

    2011-01-01

    Roč. 3, č. 1 (2011), s. 43-64 ISSN 1803-6546 Institutional research plan: CEZ:AV0Z80150510 Keywords : Czechoslovak-Polish solidarity * Czechoslovak-Polish relations * Brno * associations * Interwar Period Subject RIV: AB - History

  6. [Jakub Barner (1640-1683) and his Chymia philosophica (1698): side notes on the publication of the Polish translation].

    Science.gov (United States)

    Prinke, Rafat T

    2014-01-01

    The translation of Chymiaphilosophica by Jakub Barner is the second publication in Polish historiography of a printed source work on early modem chemistry (alchemy) written by a Polish citizen, well known and influencial across Europe (the first such translation comprised the treatises of Michael Sendivogius). This admirable initiative of unquestionable value to Polish historians of science resulted in an elegantly published volume, with an extensive introduction and useful appendices. The language of the translation is pleasant to read, retaining the spirit of the original by means of a moderate use of archaisms and generally accurate selection of proper terminology. A closer comparison of some fragments of the translation reveals, however, that it omits essential words, phrases and even entire sentences. The translation itself is occasionally incorrect as well, completely changing the meaning of the author's text and distorting his intentions, thereby undermining the reliability of the Polish translation as a whole. In the factual layer, identifying both chemical substances and (especially) the names of the authors cited by Barner often appear to be doubtful or problematic. Apart from numerous obvious mistakes, as well as leaving many surnames unidentified even when it was very difficult, the translators and/or editors of the Polish text created some non-existent authors as a result of errors produced while copying their surnames from the original text or due to unfounded assumptions that some chemical or botanical terms are names of chemical authors. There is also no consistency in the spelling of surnames (usually left in the Latin form, sometimes spelled with wrong inflection, but also modernised). In the biographical introduction there are also numerous factual errors and some bizarre mistranslations. Not only did its author fail to correct invalid information of earlier biographers of Barner, relying only on the most obvious and accessible publications, but

  7. ANATOMIC STRUCTURE OF CAMPANULA ROTUNDIFOLIA L. GRASS

    OpenAIRE

    V. N. Bubenchikova; E. A. Nikitin

    2017-01-01

    The article present results of the study for a anatomic structure of Campanula rotundifolia grass from Campanulaceae family. Despite its dispersion and application in folk medicine, there are no data about its anatomic structure, therefore to estimate the indices of authenticity and quality of raw materials it is necessary to develop microdiagnostical features in the first place, which could help introducing of thisplant in a medical practice. The purpose of this work is to study anatomical s...

  8. Economics of extreme weather events: Terminology and regional impact models

    Directory of Open Access Journals (Sweden)

    Malte Jahn

    2015-12-01

    Full Text Available Impacts of extreme weather events are relevant for regional (in the sense of subnational economies and in particular cities in many aspects. Cities are the cores of economic activity and the amount of people and assets endangered by extreme weather events is large, even under the current climate. A changing climate with changing extreme weather patterns and the process of urbanization will make the whole issue even more relevant in the future. In this paper, definitions and terminology in the field of extreme weather events are discussed. Possible regional impacts of extreme weather events are collected, focusing on European cities. The human contributions to those impacts are emphasized. Furthermore, methodological aspects of economic impact assessment are discussed along a temporal and a sectoral dimension. Finally, common economic impact models are compared, analyzing their strengths and weaknesses.

  9. INIS, CEA and nuclear terminology; INIS, CEA et terminologie nucleaire

    Energy Technology Data Exchange (ETDEWEB)

    Surmont, J.; Brulet, C.; Constant, A.; Guille, N.; Le Blanc, A.; Mouffron, O.; Anguise, P.; Jouve, J.J

    2007-07-01

    This poster, prepared for the fifth edition of the meetings of scientific and technical information professionals (RPIST, Nancy (France)), presents, first, the INIS information system, its content and coverage, the French participation to this system and the role of the CEA-Saclay as France's official representative for this system. Then it presents the INIS thesaurus with its different levels as a terminological tool for the indexing of documents and for searching documents inside the database. Finally, the very first electronic version of the multilingual thesaurus is introduced. Several national INIS centres, including the CEA-Saclay, have contributed to the translation of lists of new terms and of forbidden terms (synonyms). (J.S.)

  10. Innovation and Public Procurement: Terminology, Concepts, and Applications

    DEFF Research Database (Denmark)

    Obwegeser, Nikolaus; Müller, Sune Dueholm

    2018-01-01

    differentiates between literature streams on (1) innovations in the public procurement process, (2) innovation of public services by means of procurement, and (3) the use of public procurement as a tool for demand-side innovation policy-making. For each of these streams of literature, different focus areas...... are often using ambiguous wording and have not yet reached consensus on the terminology and concepts involved. This state of affairs leads to research fragmentation and lack of knowledge convergence. For the purpose of contributing to knowledge synthesis and consolidation, this article provides a structured...... review of the literature on innovation in public procurement. From categorizing publications based on innovation drivers, concepts, and research approaches, the emerging structure of the field is described and synthesized into a framework of innovation in public procurement. The proposed framework...

  11. Hip arthroplasty. Part 1: prosthesis terminology and classification

    International Nuclear Information System (INIS)

    Pluot, E.; Davis, E.T.; Revell, M.; Davies, A.M.; James, S.L.J.

    2009-01-01

    Hip arthroplasty is an extremely common orthopaedic procedure and there is a wide array of implants that are in current use in the UK. The follow-up of patients who have undergone insertion of a hip prosthesis is shifting from a consultant-lead hospital service towards primary care. As this change in patient care continues it becomes increasingly important that an accurate description of the radiographic features is communicated to the primary-care practitioner so appropriate specialist input can be triggered. This review focuses on the terminology and classification of hip prostheses. This acts as a precursor for Part 2 of this series, which describes the normal and abnormal radiographic findings following hip prosthesis insertion.

  12. Plaguicidas y Biodiversidad: Terminología, Causas e Impactos

    Directory of Open Access Journals (Sweden)

    Larissa Camapum de Souza

    2016-10-01

    Full Text Available El propósito de este trabajo es, primero, definir el concepto de «plaguicidas» para identificar la terminología pertinente. Después, se establece una breve exposición histórica general de las causas que llevaron a la intensificación del uso de plaguicidas a partir de la segunda mitad del siglo XX, en el mundo y en Brasil. En este punto, el estudio es hecho con investigación de bibliografía, basado en clásicos sobre el tema como punto de partida para un análisis más contemporánea. Por fin, son alaizados los impactos de los plaguicidas en la biodiversidad, a través de una perspectiva más allá de la ambiental.

  13. The Hellenic and Hippocratic origins of the spinal terminology.

    Science.gov (United States)

    Panourias, Ioannis G; Stranjalis, George; Stavrinou, Lampis C; Sakas, Damianos E

    2011-07-01

    Numerous Hellenic terms have been gradually adopted during the development of modern medical science. Moreover, there are a significant number of words that derive directly from the Hippocratic texts. Hippocrates (ca. 460-ca. 377 BC), revered as the father of medicine, and his followers left behind a valuable heritage of medical knowledge that, practically, laid the foundations of Western medicine. Their theories, collected in Corpus Hippocraticum, transformed medicine by adding, mainly, clinical observation and inductive reasoning as significant parts of medical diagnosis and treatment. Additionally, Hippocratic writings have provided an invaluable heritage of medical terms for all medical fields. The present article examines the Hellenic and Hippocratic terminology referring to the spine and how this vocabulary has influenced and dominated upon modern spinal onomatology.

  14. A standard for terminology in chronic pelvic pain syndromes

    DEFF Research Database (Denmark)

    Doggweiler, Regula; Whitmore, Kristene E; Meijlink, Jane M

    2017-01-01

    AIMS: Terms used in the field of chronic pelvic pain (CPP) are poorly defined and often confusing. An International Continence Society (ICS) Standard for Terminology in chronic pelvic pain syndromes (CPPS) has been developed with the aim of improving diagnosis and treatment of patients affected...... by chronic pelvic pain syndromes. The standard aims to facilitate research, enhance therapy development and support healthcare delivery, for healthcare providers, and patients. This document looks at the whole person and all the domains (organ systems) in a systematic way. METHODS: A dedicated working group...... (WG) was instituted by the ICS Standardisation Steering Committee according to published procedures. The WG extracted information from existing relevant guidelines, consensus documents, and scientific publications. Medline and other databases were searched in relation to each chronic pelvic pain...

  15. Advanced Encoding for Multilingual Access in a Terminological Data Base

    DEFF Research Database (Denmark)

    Leroyer, Patrick; L'Homme, Marie-Claude; Robichaud, Benoît

    2010-01-01

    This paper describes new functionalities implemented in a terminological database (TDB) in order to allow efficient editing of and access to multilingual data. The functionalities are original in the sense that they allow users of the database to retrieve the equivalents not only of headwords......, but also of semantically related terms (especially collocations) that appear within the articles. The methods we developed are based on a formal encoding of lexical relationships, namely lexical functions (LFs). Since LFs are language-independent and are designed to capture semantic distinctions, links...... between equivalents can be established automatically. Examples are taken from the fields of computing and the Internet and focus on English and French. However, the model can easily be extended to other fields and languages provided that the data is available and encoded properly....

  16. Terminology development towards harmonizing multiple clinical neuroimaging research repositories.

    Science.gov (United States)

    Turner, Jessica A; Pasquerello, Danielle; Turner, Matthew D; Keator, David B; Alpert, Kathryn; King, Margaret; Landis, Drew; Calhoun, Vince D; Potkin, Steven G; Tallis, Marcelo; Ambite, Jose Luis; Wang, Lei

    2015-07-01

    Data sharing and mediation across disparate neuroimaging repositories requires extensive effort to ensure that the different domains of data types are referred to by commonly agreed upon terms. Within the SchizConnect project, which enables querying across decentralized databases of neuroimaging, clinical, and cognitive data from various studies of schizophrenia, we developed a model for each data domain, identified common usable terms that could be agreed upon across the repositories, and linked them to standard ontological terms where possible. We had the goal of facilitating both the current user experience in querying and future automated computations and reasoning regarding the data. We found that existing terminologies are incomplete for these purposes, even with the history of neuroimaging data sharing in the field; and we provide a model for efforts focused on querying multiple clinical neuroimaging repositories.

  17. Molecular biology - Part I: Techniques, terminology, and concepts

    International Nuclear Information System (INIS)

    Brown, J. Martin

    1996-01-01

    Purpose/Objective: One of the barriers to understanding modern molecular biology is the lack of a clear understanding of the relevant terminology, techniques, and concepts. This refresher course is intended to address these deficiencies starting from a basic level. The lecture will cover many of the common uses of recombinant DNA, including gene cloning and manipulation. The goal is to enable the nonspecialist to increase his or her understanding of molecular biology in order to more fully enjoy reading current publications and/or listening seminars. Radiation biologists trying to understand a little more molecular biology should also benefit. The following concepts will be among those explained and illustrated: restriction endonucleases, gel electrophoresis, gene cloning, use of vectors such as plasmids, bacteriophage, cosmids and viruses, cDNA and genomic libraries, Southern, Northern, and Western blotting, fluorescent in situ hybridization, polymerase chain reaction (PCR), gel retardation, and reporter gene assays

  18. MR urography: Anatomical and quantitative information on ...

    African Journals Online (AJOL)

    MR urography: Anatomical and quantitative information on congenital malformations in children. Maria Karaveli, Dimitrios Katsanidis, Ioannis Kalaitzoglou, Afroditi Haritanti, Anastasios Sioundas, Athanasios Dimitriadis, Kyriakos Psarrakos ...

  19. SUDS, LID, BMPs, WSUD and more - The evolution and application of terminology surrounding urban drainage

    DEFF Research Database (Denmark)

    Fletcher, Tim D.; Shuster, William; Hunt, William F.

    2015-01-01

    understandings of the principles that are applied locally to address specific problems. Despite the understandable desire to have a 'uniform set of terminology', such a concept is flawed, ignoring the fact that terms reflect locally shared understanding. The local development of terminology thus has an important...

  20. 9 CFR 146.43 - Terminology and classification; meat-type turkey slaughter plants.

    Science.gov (United States)

    2010-01-01

    ... COMMERCIAL POULTRY Special Provisions for Meat-Type Turkey Slaughter Plants § 146.43 Terminology and... program is intended to be the basis from which the meat-type turkey industry may conduct a program to... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Terminology and classification; meat...

  1. A usability evaluation of a SNOMED CT based compositional interface terminology for intensive care

    NARCIS (Netherlands)

    Bakhshi-Raiez, F.; de Keizer, N. F.; Cornet, R.; Dorrepaal, M.; Dongelmans, D.; Jaspers, M. W. M.

    2012-01-01

    Objective: To evaluate the usability of a large compositional interface terminology based on SNOMED CT and the terminology application for registration of the reasons for intensive care admission in a Patient Data Management System. Design: Observational study with user-based usability evaluations

  2. Challenges in Archetypes Terminology Binding Using SNOMED-CT Compositional Grammar: The Norwegian Patient Summary Case.

    Science.gov (United States)

    Marco-Ruiz, Luis; Pedersen, Rune

    2017-01-01

    In order to cover the requirements for interoperability in the Norwegian context, we studied the terminology binding of archetypes to terminology expressions created with the SNOMED-CT compositional grammar. As a result we identified important challenges categorized as technical, expressivity, human, and models mismatch.

  3. Terminological Multifaceted Educational Dictionary of Active Type as a Possible Way of Special Discourse Presentation

    Science.gov (United States)

    Fatkullina, Flyuza; Morozkina, Eugenia; Suleimanova, Almira; Khayrullina, Rayca

    2016-01-01

    The purpose of this article is to disclose the scientific basis of the author's academic terminological dictionary for future oil industry experts. Multifaceted terminological dictionary with several different entries is considered to be one of the possible ways to present a special discourse in the classroom. As a result of the study the authors…

  4. Perspectives on Terminology and Conceptual and Professional Issues in Health Education and Health Promotion Credentialing

    Science.gov (United States)

    Taub, Alyson; Allegrante, John P.; Barry, Margaret M.; Sakagami, Keiko

    2009-01-01

    This article was prepared to inform the deliberations of the Galway Consensus Conference by providing a common and global reference point for the discussion of terminology and key conceptual and professional issues in the credentialing of health education and health promotion specialists. The article provides a review of the terminology that is…

  5. Terminological Analysis of the Corpus of Ancient Greek Medical Writings

    Directory of Open Access Journals (Sweden)

    Nina Čengić

    2004-07-01

    Full Text Available Selected writings of Corpus Hippocraticum, the oldest extant body of medical texts which were written in the period between the 5th and the 4th century BC, were subject of linguistic research based on discourse analysis. From this aspect, Hippocratic texts are treated as representatives of one of the first professional jargons of western civilization. The emphasis is placed on the formal levels of linguistic description in order to establish formal peculiarities of the Hippocratic discourse. Approach to formal characteristics of Hippocratic discourse stresses some wider contextual elements like interactions between philosophy and medicine, elements of orally established society, spread of literacy, creation of domain of public communication and influence of its rules to different aspects of communication in ancient Greece. The formal linguistic features of the   Hippocratic discourse are classified into groups of dialect features, terminological differentiation, rhetoric techniques and strategies, structural characteristics, presence of author and audience, syntactical peculiarities and elements of the context. Terminological differentiation in Hippocratic discourse is a very important level of formal description because it is considered to be one of the hallmarks of a professional discourse. It refers to the existence of a specific subset in the linguistic system which includes specially created technical terms. Hippocratic discourse shows different degrees of technical differentiation. The formalisation of the presence of author and audience is considered to be an essential element of a technical discourse as well. It is considered to be a later element which entered the technical discourse under the influence of sophistic rhetoric and rules of public communication (doctrine of persuasive communication. Approach to the  dimension of  context includes analysis of all the utterances which  relate to various aspects of wider social context

  6. Chemical mechanical polishing (CMP) of sapphire

    Science.gov (United States)

    Zhu, Honglin

    The concept of chemical mechanical polishing (CMP) was examined for finishing sapphire. In this study sapphire was used as a model system for oxide ceramics. The removal rates were determined by weight loss. Surface quality and structure were characterized with surface probe microscopy (SPM). Polishing experiments were designed to test the chemically modified surface layer. A series of abrasives with various hardnesses including mono-crystalline and polycrystalline diamond, alpha and gamma alumina, zirconia, ceria and silica were used. Diaspore was also evaluated. The results indicated that, with similar particle size and shape, harder abrasives do not necessarily cause faster material removal and better surface finish, and abrasives with hardness equal to or less than sapphire such as alpha alumina and gamma alumina achieved the best surface finish and efficient material removal. A hypothesis was proposed that the sapphire surface was modified by water to form a thin hydration laver with structure and hardness close to diaspore. Abrasives with a hardness between diaspore and sapphire polished the c-plane of sapphire with good surface finish and efficient removal. SPM indicated the hydration layer on the c-plane surface was about 1 nm thick. Removal rate and surface finish as a function of pH were also examined on c-plane sapphire with nano-alumina abrasives. The removal rate as a function of pH was compared to the solubility behavior of alumina. The results showed the deviation of pH from the lowest solubility pH for alumina (pH = 5) was a driving force for the surface reaction to form a hydration layer. The anisotropy of sapphire strongly affects removal rate and surface quality in CMP. The relationships among orientation. pH and abrasive were studied for sapphire with c (0001), a (11-20), and m (10-10) planes. Based on the results, the CMP process for sapphire includes chemical reaction of the surface to form a thin reaction layer that is softer than sapphire

  7. The attitudes of medical students toward the importance of understanding classical Greek and Latin in the development of an anatomical and medical vocabulary.

    Science.gov (United States)

    Stephens, Shiby; Moxham, Bernard John

    2016-09-01

    Students on entering medical school are faced with acquiring new, and voluminous, anatomical and medical terminologies. A reason why acquiring these terminologies may be problematic relates to the fact that many terms are derived from classical Greek and Latin; languages nowadays that are rarely taught at school. It might also be supposed that the often reported reduction in exposure to anatomy, and time spent in the dissection room, impairs the students' knowledge and understanding of anatomical relationships, and thus further complicates the acquisition of the terminologies. To date, there have been no studies that have quantified the attitudes of medical students toward the importance of understanding classical Greek and Latin during their medical training. In order to assess these attitudes, this study was undertaken for the newly-recruited (First Year) medical students and for the Final Year medical students at Cardiff University. They were provided with a brief questionnaire that was devised in accordance with Thurstone and Chave (1951) principles and with ethical approval. One hundred and eighty First Year students and one hundred and nineteen Final Year students responded. Our initial hypothesis was that students throughout the medical curriculum have an unfavorable attitude toward the importance of classical Greek and Latin. This hypothesis was supported by the attitudes of the Final Year students but not by the First Year medical students. While we would still advocate that First Year medical students should acquire some understanding of and have some formal or informal instruction in, classical Greek and Latin as they pertain to medical terminologies, we acknowledge that Final Year students are likely to have become reasonably well-versed in the origins of medical terminologies without formal instruction. Clin. Anat. 29:696-701, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  8. On the integration and standardization of medication error data: taxonomies, terminologies, causes and contributing factors.

    Science.gov (United States)

    Taib, Ibrahim Adham; McIntosh, Andrew Stuart

    2010-12-01

    A reliable database on the causes and contributing factors of medication errors can inform strategies for their prevention. To form a single database from multiple databases requires a process of integration that both maximizes the utility of the new data and minimizes the loss of information. Unfortunately, the terminologies used by different studies and databases may limit integration; therefore, terminologies must be standardized prior to integration. The National Coordinating Council for Medication Error Reporting and Prevention (NCC MERP) Taxonomy of Medication Errors was applied to standardize the different terminologies in 11 studies that reported the causes or contributing factors of medication errors. After standardization, 57% of the reported causes and contributing factors were integrated to form a database while 43% were not integrated because the terminologies could not be standardized or were not similar to the taxonomy. This study highlights the challenges to standardizing and integrating databases and the importance of adopting and applying a standardized terminology to record medical errors.

  9. What is in a name? Understanding the implications of participant terminology.

    Science.gov (United States)

    Bibace, Roger; Clegg, Joshua W; Valsiner, Jaan

    2009-03-01

    The authors discuss the history of research terminology in American psychology with respect to the various labels given to those upon whom we conduct research ("observer"-"subject"-"participant"-"client"). This history is supplemented with an analysis of participant terminology in APA manuals from four historical eras, from the 1950s to the present. The general trend in participant terminology reflects the overall trends in American psychology, beginning with a complex lexicon that admitted both the passive and the active research participant, followed by a dominance of the passive term 'subject' and ending with the terminological ambiguity and multiplicity reflected in contemporary psychology. This selective history serves to contextualize a discussion of the meaning, functions, and implications of the transformations in, and debates over, participant terminology.

  10. Conceptual Terminological Structure of Pedagogy as the Subject of Historical Pedagogic Research

    Directory of Open Access Journals (Sweden)

    Y. A. Koshkina

    2012-01-01

    Full Text Available The paper is devoted to the formation and development of pedagogic terminology. The author theoretically substantiates the potential of the historical pedagogic research concerning the conceptual and terminological structure of the Russian pedagogy. The research is based on the following ideas: correlation between the scientific terminology formation and scientific knowledge genesis; philosophic concept as a form and result of reality reflection; linguistic concept of the term as a functional unit of a scientific language; specifics of pedagogic knowledge reflection in conceptual form. The main research findings include identifying methodological requirements for analyzing the conceptual scientific formation in historical context; substantiating the resource basis; revealing the investigation principles; describing the tools and their implementation peculiarities with regard to the specifics of pedagogical concepts and terms. The acquired results can be used while exploring the pedagogic history problems, pedagogic methodology and terminology. In conclusion, the actual research trends of pedagogic terminology formation are reviewed from the historical pedagogic perspective. 

  11. Conceptual Terminological Structure of Pedagogy as the Subject of Historical Pedagogic Research

    Directory of Open Access Journals (Sweden)

    Y. A. Koshkina

    2015-02-01

    Full Text Available The paper is devoted to the formation and development of pedagogic terminology. The author theoretically substantiates the potential of the historical pedagogic research concerning the conceptual and terminological structure of the Russian pedagogy. The research is based on the following ideas: correlation between the scientific terminology formation and scientific knowledge genesis; philosophic concept as a form and result of reality reflection; linguistic concept of the term as a functional unit of a scientific language; specifics of pedagogic knowledge reflection in conceptual form. The main research findings include identifying methodological requirements for analyzing the conceptual scientific formation in historical context; substantiating the resource basis; revealing the investigation principles; describing the tools and their implementation peculiarities with regard to the specifics of pedagogical concepts and terms. The acquired results can be used while exploring the pedagogic history problems, pedagogic methodology and terminology. In conclusion, the actual research trends of pedagogic terminology formation are reviewed from the historical pedagogic perspective. 

  12. Lingua-Cultural Approach to Special Language Terminology Based on Equivalence

    Directory of Open Access Journals (Sweden)

    Juliana Fecušová

    2017-06-01

    Full Text Available The present paper introduces the results of the research which aimed to explore specialized taxation terminology in the English and Slovak languages. Since some Slovak taxation terminology has been translated or borrowed from English, the comparative and contrastive analysis is applied in order to assert the degree of equivalence between the Slovak taxation terminology and the British taxation terminology (as used by the HMRC. The Slovak translation equivalents are divided into absolute, relative and zero equivalents. The examples of zero equivalence are further subjected to qualitative analysis in search for pragmatic equivalence. The comparative analysis of English and Slovak taxation terminology has discovered that even though some Slovak terms from this field have been translated or borrowed from the English language, they have been adapted to Slovak culture and conventions regarding their conceptualization and with regard to their form, they follow the principles of the Slovak language system.

  13. Brewing test with puffed polished rice. : Sake brewing with puffed polished rive (II)

    OpenAIRE

    家村, 芳次; 永田, 興四郎; 田端, 昇; 佐無田, 隆; 吉沢, 淑; YOSHITSUGU, IEMURA; KOSHIROU, NAGATA; NOBORU, TABATA; TAKASHI, SAMUTA; KIYOSHI, YOSHIZAWA; 菊正宗酒造株式会社; 山邑酒造株式会社; 灘五郷酒造組合; 熊本国税局鑑定官室; 国税庁醸造試験所

    1985-01-01

    Polished rice was puffed by continuous puffing equipment, then part of it was contracted under a vapor stream. These samples were used for sake brewing.Fermentation took place normally in very tested mash. Each sake produced differed slightly in alcohol concentration, nihonshudo, and acidity; they differed greatly in the content of amino acids, with that of sake made from puffed rice was lower than that of sake made from steamed rice, and that of sake made from contracted rice after puffing t...

  14. Plurilingualism and polish teenage learners of english

    Directory of Open Access Journals (Sweden)

    Agnieszka Otwinowska‑Kasztelanic

    2012-01-01

    Full Text Available Using several languages has become a norm for those who want to learn and work in the European Union. However, teaching for plurilingualism is also a challenge. The present paper first clarifies the notions of plurilingualism and multilingualism, then discusses the role of crosslinguistic similarity in language learning in the case of European languages. It also shows how lexical crosslinguistic similarity can be used in teaching typologically related and unrelated languages, and discusses the key factors in noticing such similarity. The research presented reports on examining and raising language awareness of Polish‑‑ English cognate vocabulary in the case of a group of Polish teenage learners of English. It presents the results of a small‑‑ scale study in quasi‑‑ experimental design, as well as qualitative research on the learners’ opinions and attitudes. Finally, the paper presents implications for language pedagogy and focuses on the fact that awareness raising may affect the learners’ plurilingual competence.

  15. Antigenic typing Polish isolates of canine parvovirus

    Energy Technology Data Exchange (ETDEWEB)

    Mizak, B. [National Veterinary Research Institute, Pulawy (Poland); Plucienniczak, A. [Polish Academy ofd Sciences. Microbiology and Virology Center, Lodz (Poland)

    1995-12-31

    Polish strains of canine parvovirus isolated between 1982 and 1993 were examined to determine the extent to which the virus has evolved antigenically and genetically over eleven years. Two CPV isolates obtained in Warsaw in 1982 and Pulawy in 1993, were examined using monoclonal antibody typing, restriction analysis and sequencing VP-2 protein gene. Five other isolates from Warsaw and Pulawy were tested with the panel of monoclonal antibodies specific to CPV-2, CPV-2a and common for canine parvovirus, feline panleukopenia virus and milk enteritis virus. Results of the studies demonstrated that all isolates tested represented CPV-2a antigenic type. Rapid antigenic strain replacement recorded by Parrish and Senda in the U.S.A and Japan was not confirmed in Poland. (author). 30 refs, 2 tabs.

  16. Attitudes of Polish Consumers Toward Experiential Marketing

    Directory of Open Access Journals (Sweden)

    Monika Skorek

    2017-01-01

    Full Text Available Purpose: The experience economy is a concept that can be defned as a new way of perceiving the market offer of an enterprise, focusing on the customer experience. Enterprises, both in the production and service industries, are becoming similar to one another on a massive scale, which makes it increasingly diffcult to stand out. The response to this can be to offer the consumer an unforgettable experience related to a product or service provided by a company. Methodology: This study analysed the results of qualitative research on the attitudes and opinions of Polish consumers on experience marketing. Results/fndings: The results showed that participants of the study were prepared to transition from the economy based on products or services to an economy based on experiences at a moderate level. They declared a willingness to participate in experiences offered by companies but at the same time focus on the cost and utility of them

  17. Droughts in historical times in Polish territory

    Science.gov (United States)

    Limanowka, Danuta; Cebulak, Elzbieta; Pyrc, Robert; Doktor, Radoslaw

    2015-04-01

    Climate change is one of the key environmental, social and economical issues, and it is also followed by political consequences. Impact of climate conditions on countries' economy is increasingly recognized, and a lot of attention is given, both in the global scale and by the individual national governments. In years 2008-2010, at the Poland -Institute of Meteorology and Water Management-National Research Institute was realized the KLIMAT Project on Impact of climate change on environment, economy and society (changes, effects and methods of reducing them, conclusions for science, engineering practice and economic planning) No. POIG01-03-01-14-011/08. The project was financed by the European Union and Polish state budget in frame of Innovative Economy Operational Programme. A very wide range of research was carried out in the different thematic areas. One of them was "Natural disasters and internal safety of the country (civil and economical)." The problem of drought in Poland was developed in terms of meteorology and hydrology. "Proxy" Data Descriptions very often inform about dry years and seasons, hot periods without precipitation. Analysis of historical material allowed to extract the years that have experienced prolonged periods of high temperatures and rainfall shortages. Weather phenomenon defined as drought belongs to extreme events. This information was very helpful in the process of indexing and thus to restore the course and intensity of climatic elements in the past. The analysis covered the period from year 1000 to modern times. Due to the limited information from the period of 1000-1500 the authors focused primarily on the period from 1500 to 2010. Analysis of the collected material has allowed the development of a highly precise temporal structure of the possible occurrence of dry periods to Polish territory.

  18. Anatomic characterization of the humeral nutrient artery: Application to fracture and surgery of the humerus.

    Science.gov (United States)

    Ichimura, Koichiro; Kinose, Shota; Kawasaki, Yuto; Okamura, Taro; Kato, Kota; Sakai, Tatsuo

    2017-10-01

    Anatomic characterization of the humeral nutrient artery varies among the several textbooks on human anatomy. To clarify the anatomic characteristics of the humeral nutrient artery, we reexamined its origin and course by cadaveric dissection. In typical cases, one prominent nutrient foramen was situated on the anteromedial surface of the humeral shaft, and the nutrient canal distally penetrated the cortical bone layer. The humeral nutrient artery originated from the brachial artery below the level of the nutrient foramen as a short ascending branch. On reaching near the nutrient foramen, the humeral nutrient artery formed a hairpin loop on the periosteum to enter into the nutrient foramen. In some cases, an accessory nutrient foramen was also found near the groove for the radial nerve on the posterior surface of the humerus. This accessory nutrient foramen received an accessory humeral nutrient artery that originated from the radial collateral artery. The present findings corresponded well with the descriptions in the anatomy textbooks published in English-speaking countries. However, textbooks published in German-speaking countries describe only one type of humeral nutrient artery, the branch of the profunda brachii artery. Terminologia Anatomica, the international standard in human anatomic terminology, most likely adopted the description in the German anatomy textbooks, and thus, it is necessary to correct the position of the humeral nutrient artery in the hierarchy of Terminologia Anatomica for accurate morphological description. Clin. Anat. 30:978-987, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

  19. Anatomical and palynological characteristics of Salvia willeana ...

    African Journals Online (AJOL)

    In this study, anatomical and palynological features of the roots, stems, petiole and leaves of Salvia willeana (Holmboe) Hedge and Salvia veneris Hedge, Salvia species endemic to Cyprus, were investigated. In the anatomical characteristics of stem structures, it was found that the chlorenchyma composed of 6 or 7 rows of ...

  20. Morphological and anatomical response of Acacia ehrenbergiana ...

    African Journals Online (AJOL)

    ajl user 3

    2012-02-20

    Feb 20, 2012 ... The response of Acacia ehrenbergiana Hayne and Acacia tortilis (Forssk) Haynes subspp. raddiana seedlings to 100, 50 and 25% field capacity (FC) watering regimes was studied to determine their morphological and anatomical behaviour. Both species responded morphologically as well as anatomically ...

  1. Direct polishing of aluminum mirrors with higher quality and accuracy.

    Science.gov (United States)

    Yin, Ziqiang; Yi, Zhang

    2015-09-10

    Diamond-turned aluminum mirrors have been widely used in modern optical systems. However, the machined surfaces have characteristic periodic tool marks, which contribute to reduced optical performance by creating effects such as scattering and distortion. This paper develops a new polishing technology to polish aluminum mirrors directly to remove tool marks and improve surface quality and surface accuracy. A Taguchi experiment was used to obtain optimal polishing conditions for reducing surface roughness, and computer-controlled optical surfacing technology was employed for form correction of aluminum mirrors.

  2. Reel-to-reel substrate tape polishing system

    Energy Technology Data Exchange (ETDEWEB)

    Selvamanickam, Venkat; Gardner, Michael T.; Judd, Raymond D.; Weloth, Martin; Qiao, Yunfei

    2005-06-21

    Disclosed is a reel-to-reel single-pass mechanical polishing system (100) suitable for polishing long lengths of metal substrate tape (124) used in the manufacture of high-temperature superconductor (HTS) coated tape, including multiple instantiations of a polishing station (114) in combination with a subsequent rinsing station (116) arranged along the axis of the metal substrate tape (124) that is translating between a payout spool (110a) and a take-up spool (110b). The metal substrate tape obtains a surface smoothness that is suitable for the subsequent deposition of a buffer layer.

  3. Quality in Air transport process of LOT Polish Airlines

    Directory of Open Access Journals (Sweden)

    Robert Rozenberg

    2015-10-01

    Full Text Available This article discusses the air transport process on scheduled long-haul flights of LOT Polish Airlines. Main focus is taken on price development of these routes. The introduction consists of a brief profile characterized LOT Polish Airlines. Next chapter summarizes the air transport process on scheduled longhaul flights. The frame of article is formed by price development statistics for scheduled long-haul flights to / from Beijing of LOT Polish Airlines and two other competing companies. Conclusion contains results of analysis and puts forward proposals to streamline of the air transport process on reviewed routes.

  4. Presentation of the verbs in Bulgarian-Polish electronic dictionary

    Directory of Open Access Journals (Sweden)

    Ludmila Dimitrova

    2014-09-01

    Full Text Available Presentation of the verbs in Bulgarian-Polish electronic dictionary This paper briefly discusses the presentation of the verbs in the first electronic Bulgarian-Polish dictionary that is currently being developed under a bilateral collaboration between IMI-BAS and ISS-PAS. Special attention is given to the digital entry classifiers that describe Bulgarian and Polish verbs. Problems related to the correspondence between natural language phenomena and their presentations are discussed. Some examples illustrate the different types of dictionary entries for verbs.

  5. Profilometric analysis of root surfaces after using various polishing agents

    Directory of Open Access Journals (Sweden)

    Anjan Jana

    2016-01-01

    Full Text Available Background: Polishing is an important step in oral prophylaxis procedure which retards further accumulation of plaque on the root surfaces. Though polishing was done with various abrasive particles with different sizes over a long period of time, it was never been highlighted to evaluate the ideal polishing material and the particle size that would produce the ideal surface smoothness (Ra 5 μm are not able to produce the surface smoothness <0.2 μm. Only, submicron sized particles are able to produce the desired smoothness.

  6. Study on the influence of the rotational speed of polishing disk on material removal in aspheric surface compliant polishing

    Directory of Open Access Journals (Sweden)

    Liyong Hu

    2015-03-01

    Full Text Available When a soft polishing tool is compressed on a stiff workpiece of curved surface, the contact area is a piece of the curved surface. In the process of aspheric surface polishing, the machining speed is always provided by the rotational speed of the spindle of a computer numerical control lathe. Yet, the polishing tool is usually made rotating to remove cutting scraps and broken abrasives from the contact area. The rotational speed of the polishing tool would change the distribution state of the relative speed in the whole contact area, and it would definitely change the volume of material removal in the surface of the workpiece. This article studies how the rotational speed of the polishing tool changes the distribution state of the relative speed in the whole contact area and material removal in the volume of the surface of the workpiece. The computing results show that the volume of material removal increases with the increase in both the rotational speed of polishing disk and the rotational speed of lathe spindle, but the polishing quality is totally not in this case.

  7. More terminological clarity in the interprofessional field – a call for reflection on the use of terminologies, in both practice and research, on a national and international level

    Directory of Open Access Journals (Sweden)

    Mitzkat, Anika

    2016-04-01

    Full Text Available The terminology which has been used up until now within interprofessional healthcare has been characterised by a certain definitional weakness, which, among other factors, has been caused by an uncritical adoption of language conventions and a lack of theoretical reflection. However, as terminological clarity plays a significant role in the development and profiling of a discipline, the clarification and definition of commonly-used terminology has manifested itself as a considerable objective for the interprofessional research community. One of the most important journals for research in the area of interprofessional education and care, the Journal of Interprofessional Care, has expanded its author guidelines relating to terminology, modeled after the conceptual considerations of the research group around Barr et. al and Reeves et al. A German translation of the suggested terms therein has been presented in this contribution, and discussed in light of the challenges to a possible adaptation for the German-speaking world. The objective is to assist communication in practice and research in becoming clearer, while promoting an increasing awareness to and the transparency of determined definitions and terminologies.

  8. More terminological clarity in the interprofessional field - a call for reflection on the use of terminologies, in both practice and research, on a national and international level.

    Science.gov (United States)

    Mitzkat, Anika; Berger, Sarah; Reeves, Scott; Mahler, Cornelia

    2016-01-01

    The terminology which has been used up until now within interprofessional healthcare has been characterised by a certain definitional weakness, which, among other factors, has been caused by an uncritical adoption of language conventions and a lack of theoretical reflection. However, as terminological clarity plays a significant role in the development and profiling of a discipline, the clarification and definition of commonly-used terminology has manifested itself as a considerable objective for the interprofessional research community. One of the most important journals for research in the area of interprofessional education and care, the Journal of Interprofessional Care, has expanded its author guidelines relating to terminology, modeled after the conceptual considerations of the research group around Barr et. al and Reeves et al. A German translation of the suggested terms therein has been presented in this contribution, and discussed in light of the challenges to a possible adaptation for the German-speaking world. The objective is to assist communication in practice and research in becoming clearer, while promoting an increasing awareness to and the transparency of determined definitions and terminologies.

  9. Effect of Polishing Systems on Surface Roughness and Topography of Monolithic Zirconia.

    Science.gov (United States)

    Goo, C L; Yap, Auj; Tan, Kbc; Fawzy, A S

    2016-01-01

    This study evaluated the effect of different chairside polishing systems on the surface roughness and topography of monolithic zirconia. Thirty-five monolithic zirconia specimens (Lava PLUS, 3M ESPE) were fabricated and divided into five groups of seven and polished with the following: Group 1 (WZ)-Dura white stone followed by Shofu zirconia polishing kit; Group 2 (SZ)-Shofu zirconia polishing kit; Group 3 (CE)-Ceramiste porcelain polishers; Group 4 (CM)-Ceramaster porcelain polishers; and Group 5 (KZ)-Komet ZR zirconia polishers. All specimens were ground with a fine-grit diamond bur prior to polishing procedures to simulate clinical finishing. Baseline and post-polishing profilometric readings were recorded and delta Ra values (difference in mean surface roughness before and after polishing) were computed and analyzed using one-way analysis of variance and Scheffe post hoc test (pzirconia.

  10. Responses of Korean physical therapy students after practice with a virtual anatomical system in Japan.

    Science.gov (United States)

    Han, Heonsoo; Kosaka, Jun; Chon, Seung-Chul; Itokazu, Masafumi; Kubo, Akira

    2017-10-01

    [Purpose] To investigate responses of Korean physical therapy students, receiving medical terminology education in physical therapy both in Korean and English, after practice with a virtual anatomical system. [Subjects and Methods] The participants were 25 physical therapy students from Konyang University in South Korea visiting the International University of Health and Welfare for training purposes. The virtual anatomy practice was conducted in English using 3 dimensional virtual anatomy software constructed using real cadaver photographs. A questionnaire about this practice and anatomy was completed after the practice. [Results] The results of the questionnaire showed a trend toward high scores for virtual anatomy practice. [Conclusion] The present virtual anatomy system was created using multi-directional photographs from a real cadaver; therefore, it can be used as an auxiliary means of education using cadavers.

  11. Polish electoral geography and its methods

    Directory of Open Access Journals (Sweden)

    Zbigniew Rykiel

    2011-01-01

    Full Text Available Differences in the understanding of electoral geography between social sciences are discussed in the article. Main fields and spatial scales of Polish electoral geography are identified. Main methods of multidimensional statistics are discussed. A necessity of a proper choice, based on theories of voting behaviour, of explaning variables to statistical models are emphasised. Regression analysis indicates only a formal usefulness in electoral geography, for quantitative relationships between variables in the model can be evidenced, which may be meaningless not only essentially, but even statistically. The application of canonical analysis in electoral geography brought a methodological turning-point to the statistical approach. This method allowed to combine: (1 the foundation of the selection of input variables on theories of voting behaviour; (2 the analysis of dependence of the electoral results on socio-economic characteristics of areas; (3 an identification of electoral options; (4 a quantification of the role of the historical heritage in the contemporary voting behaviour; and (5 the analysis of the stability of the electoral space. A well grounded opinion was weakened about the general competitiveness of right- and left-wing parties in Poland’s political space. Parties with similar rather than different programmes compete in given areas. It was indicated that elections have only formal influence on the structure of Parliament while the electoral system is decisive. Electoral, including territorial, manipulations also play their part. The empirical analysis indicated that Poland’s political space is polarised between the right-wing-oriented areas of the south-eastern half of the country and the left-wing-oriented areas of the north-western half. The political competition between the left and the right operates merely on the national scale, while it is not reflected territorially.The quantification of the influence of the nineteenth

  12. Polish Defense Policy in the Context of National Security Strategy

    Science.gov (United States)

    2006-06-01

    Antoni Podolski, Polska Strategia Bezpieczenstwa jako Praktyczna Implementacja Europejskiej Strategii Bezpeczenstwa –miedzy teoria a praktyka (Warszawa...Implementacja Europejskiej Strategii Bezpeczenstwa –miedzy teoria a praktyka (Warszawa: Center for International Relations, 2005), 13. Polish Ministry

  13. Super Polishing of Aluminum 6061-T6 Mirrors, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — An innovative 2D super-polishing process for Aluminum 6061-T6 planar mirrors which removes diamond point turning (DPT) grooves and attains rms surface finishes below...

  14. The resettlement of Polish refugees after the second world war

    Directory of Open Access Journals (Sweden)

    Agata Blaszczyk

    2017-02-01

    Full Text Available The passing of the Polish Resettlement Act and the creation of the different agencies related to it undoubtedly represented an unprecedented response to the challenge of mass migration in the UK.

  15. Production of rare earth polishing powders in Russia

    International Nuclear Information System (INIS)

    Kosynkin, V.D.; Ivanov, E.N.; Kotrekhov, V.A.; Shtutza, M.G.; Grabko, A.I.

    1998-01-01

    Full text: Russia is a potent producer of polishing powders made of rare earth material presented as an extensive and well developed base. Considering the reserves, the facilities predisposition and the polishing agent (cerium dioxide) content the chief mineral source is loparite, apatite and monazite. The production of rare earth polishing powders is based on specially developed continuous technological processes, corrosion-proof equipment, ensuring a high and stable production quality. A special attention is paid to the radiation safety of the powders. The initial material for the rare earth polishing powders based on loparite is the fusion cake of rare earth chlorides obtained at that mineral chlorination. The technology of the polishing powder production from the REE fusion cake includes the following stages: dissolution of the REE fusion cake chlorides; - thorough cleaning of the REE fusion cake chlorides from radioactive and non-rare-earth impurities; chemical precipitation of REE carbonates, obtaining middlings with proper material and granulometric composition, thermal treatment of precipitated carbonates followed with the operations of drying and roasting; classification of roasted oxides, obtaining end products - polishing powders. The production of fluorine-containing powders includes the stage of their fluorination after the stage of carbonate precipitation. The stabilizing doping can be introduced both into the middlings during one of the technological process of powders manufacturing and into the end product. Rare earth polishing powders are manufactured in Russia by the Share Holding Company 'Chepetz Mechanical Plant' (ChMP Co.), the city of Glasov. The plant produces a number of polishing materials, such as; polishing powder Optinol, containing at least 50% by mass of cerium dioxide, used in the mass production of optical and other articles; polishing powder Optinol-10 with doping to improve the sedimentary and aggregate stability of the solid phase

  16. British and American English for Polish University Students

    Science.gov (United States)

    Marton, Waldemar; Preston, Dennis R.

    1975-01-01

    This article attempts to assess the validity of dividing Polish students of English into British and American groups. The tests of the various hypotheses regarding linguistic and non-linguistic results of such divisions are described. (AM)

  17. Polish Defense Policy in the Context of National Security Strategy

    National Research Council Canada - National Science Library

    Bieniek, Piotr S

    2006-01-01

    ...) and the North Atlantic Treaty Organization (NATO). Polish security policy and strategy is shaped by its geographical location, which places Poland in NATO's main strategic area opposite the Russian Federation and Belarus...

  18. The Use of Non-linguistic Data in a Terminology and Knowledge Bank

    DEFF Research Database (Denmark)

    Madsen, Bodil Nistrup

    2016-01-01

    This paper will discuss definitions and give examples of linguistic and non -linguistic representation of concepts in a terminology and knowledge bank, and it will be argued that there is a need for a taxonomy of terminological data categories. As a background the DanTermBank project, which...... to the structure of ISOcat, the first printed standard comprising data categories for terminology management, ISO 12620:1999, and other standards from ISO TC 37. Finally some examples of linguistic and non-linguistic representations of concepts which we plan to introduce into the DanTermBank will be presented....

  19. Terminología en un centro de documentación especializado

    Directory of Open Access Journals (Sweden)

    Ana Gil Seoane

    2013-12-01

    Full Text Available Se plantea los conceptos básicos del trabajo terminológico desde el punto de vista de la Teoría Comunicativa de la Terminología (TCT. La relación entre terminología y documentación, y terminología  y lingüística son los ejes de esta propuesta de análisis. También se presenta el trabajo terminológico que se realiza en un centro de documentación en el área jurídica.

  20. Collaboration of the CMEA countries concerning the treatment of radiation protection terminology

    International Nuclear Information System (INIS)

    Arkhangel'skaya, G.V.; Rodnyanskaya, L.I.

    1986-01-01

    At present particular attention is directed to the terminology of radiation hygiene because of its intensive development and of the multitude of English terms integrated into it. The Leningrad Research Institute of Radiation Hygiene has elaborated a terminology list and characterized the terms of health physics. As to the cooperation in terminology by CMEA specialists it is proposed to elaborate a multilingual dictionary with previous drawing up of equivalent terms and coordination in defining them. Another proposal concerning cooperative publishing of compilations with terms to be recommended is made

  1. How groups co-ordinate their concepts and terminology: implications for medical informatics.

    Science.gov (United States)

    Garrod, S

    1998-11-01

    Conceptual and terminological systems are established and maintained by the communities who use them. This paper reports experiments which investigate the role of communication and interaction in the process. The experiments show that isolated pairs of communicators and virtual communities of interacting pairs naturally converge on their own conceptual and terminological systems when confronted with a common task. The results also indicate that the system converged on is optimal for that particular group engaged in that particular task. These findings are discussed in relation to the increasing use of tightly coordinated medical teams and its implications for getting them to adopt standardized medical terminologies.

  2. NONCE WORDS AS FORSIGHTS AND DRIVERS OF THE TERMINOLOGY FOR NEW SCIENTIFIC DISCIPLINES

    Directory of Open Access Journals (Sweden)

    Kiuru, K.V.

    2017-09-01

    Full Text Available The article addresses some dynamic processes in the terminology of such knowledge as PR-studies, or the science of public relations. The terminology of public relations is an open system. The formation of the public relations terminology system has been focused by various social and humanistic sciences: philology, sociology, philosophy, advertising studies, the theory of mass communications and journalism. New terms "communication product" and "media product" are introduced into the scientific framework. It is noted that the emergence of new media leads to the formation of new terms that denote the actors of modern public online communications, carriers and textual results of their activities.

  3. [Peculiarities of terminology and classification of an acute pancreatitis].

    Science.gov (United States)

    Andriushchenko, D B

    2014-11-01

    The expediency of application of a term "an acute complicated pancreatitis", as well as the terms "biliary pancreatitis" and "necrotic pancreatitis", was substantiated, basing on analysis of the literature data and results of surgical treatment in 125 patients, suffering an acute pancreatitis (AP).A profound characteristic of an AP local complications in accordance to morphological, toporgapho-anatomical and quantitative features with their further systematization was accomplished. The methods of operative correction of various complications of the disease were adduced. The investigation results obtained would promote realization of the unified treatment-tactical approaches for an AP.

  4. Laser polishing of 3D printed mesoscale components

    Energy Technology Data Exchange (ETDEWEB)

    Bhaduri, Debajyoti, E-mail: debajyoti.bhaduri@gmail.com [Department of Mechanical Engineering, School of Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom); Penchev, Pavel; Batal, Afif; Dimov, Stefan; Soo, Sein Leung [Department of Mechanical Engineering, School of Engineering, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom); Sten, Stella; Harrysson, Urban [Digital Metal, Höganäs AB, 263 83 Höganäs (Sweden); Zhang, Zhenxue; Dong, Hanshan [School of Metallurgy and Materials, University of Birmingham, Edgbaston, Birmingham, B15 2TT (United Kingdom)

    2017-05-31

    Highlights: • Process optimisation for laser polishing novel 3D printed SS316L parts. • Evaluating the effects of key polishing parameters on SS316L surface roughness. • Detailed spectroscopic analysis of oxide layer formation due to laser polishing. • Comparative surface integrity analysis of SS parts polished in air and argon. • A maximum reduction in roughness of over 94% achieved at optimised polishing settings. - Abstract: Laser polishing of various engineered materials such as glass, silica, steel, nickel and titanium alloys, has attracted considerable interest in the last 20 years due to its superior flexibility, operating speed and capability for localised surface treatment compared to conventional mechanical based methods. The paper initially reports results from process optimisation experiments aimed at investigating the influence of laser fluence and pulse overlap parameters on resulting workpiece surface roughness following laser polishing of planar 3D printed stainless steel (SS316L) specimens. A maximum reduction in roughness of over 94% (from ∼3.8 to ∼0.2 μm S{sub a}) was achieved at the optimised settings (fluence of 9 J/cm{sup 2} and overlap factors of 95% and 88–91% along beam scanning and step-over directions respectively). Subsequent analysis using both X-ray photoelectron spectroscopy (XPS) and glow discharge optical emission spectroscopy (GDOES) confirmed the presence of surface oxide layers (predominantly consisting of Fe and Cr phases) up to a depth of ∼0.5 μm when laser polishing was performed under normal atmospheric conditions. Conversely, formation of oxide layers was negligible when operating in an inert argon gas environment. The microhardness of the polished specimens was primarily influenced by the input thermal energy, with greater sub-surface hardness (up to ∼60%) recorded in the samples processed with higher energy density. Additionally, all of the polished surfaces were free of the scratch marks, pits, holes

  5. Giant cell arteritis. Part I. Terminology, classification, clinical manifestations, diagnosis

    Directory of Open Access Journals (Sweden)

    Azamat Makhmudovich Satybaldyev

    2012-01-01

    Full Text Available Giant cell arteritis (GCA is a vasculitis affecting mainly large and medium-sized arteries, which the classification of systemic vasculitides refers to as those mainly involving the large vessels. GCA is typified by the involvement of extracranial aortic branches and intracranial vessels, the aorta and its large vessels are being affected most frequently. The paper considers the terminology, classification, prevalence, major pathogenic mechanisms, and morphology of GCA. A broad spectrum of its clinical subtypes is due to target vessel stenosis caused by intimal hyperplasia. In 40% of cases, GCA is shown to be accompanied by polymyalgia rheumatica that may either precede or manifest simultaneously with GCA, or follow this disease. The menacing complications of GCA may be visual loss or ischemic strokes at various sites depending on the location of the occluded vessel. Along with the gold standard verification of the diagnosis of GCA, namely temporal artery biopsy, the author indicates other (noninvasive methods for detection of vascular lesions: color Doppler ultrasonography of the temporal arteries, fluorescein angiography of the retina, mag-netic resonance angiography, magnetic resonance imaging, and computed tomography to rule out aortic aneurysm. Dynamic 18F positron emission tomography is demonstrated to play a role in the evaluation of therapeutic effectiveness.

  6. Terminology for Biorelated Polymers and Applications (IUPAC Recommendations 2012

    Directory of Open Access Journals (Sweden)

    Jarm, V.

    2014-11-01

    Full Text Available Like most of the materials used by humans, polymeric materials are proposed in the literature and occasionally exploited clinically, as such, as devices or as part of devices, by surgeons, dentists, and pharmacists to treat traumata and diseases. Applications have in common the fact that polymers function in contact with animal and human cells, tissues, and/or organs. More recently, people have realized that polymers that are used as plastics in packaging, as colloidal suspension in paints, and under many other forms in the environment, are also in contact with living systems and raise problems related to sustainability, delivery of chemicals or pollutants, and elimination of wastes. These problems are basically comparable to those found in therapy. Last but not least, biotechnology and renewable resources are regarded as attractive sources of polymers. In all cases, water, ions, biopolymers, cells, and tissues are involved. Polymer scientists, therapists, biologists, and ecologists should thus use the same terminology to reflect similar properties, phenomena, and mechanisms. Of particular interest is the domain of the so-called „degradable or biodegradable polymers” that are aimed at providing materials with specific time-limited applications in medicine and in the environment where the respect of living systems, the elimination, and/or the bio-recycling are mandatory, at least ideally.

  7. On the new ISO guide on risk management terminology

    International Nuclear Information System (INIS)

    Aven, Terje

    2011-01-01

    A new ISO guide on risk management terminology has recently been issued. The guide provides basic vocabulary for developing a common understanding of risk assessment and risk management concepts and terms among organisations and functions, and across different application areas. It provides the foundation of, for example, the ISO 31000 standard on risk management. The guide strongly influences the risk assessment and risk management field, and its quality is thus of utmost importance. In this paper a critical review of the guide is conducted. We argue that the guide fails in several ways in producing consistent and meaningful definitions of many of the key concepts covered. A main focus is placed on the risk concept, which is defined as the effect of uncertainty on objectives, but also many other definitions are looked into, including probability, vulnerability, hazard, risk identification and risk description. Examples are used to illustrate the problems and show how they can be rectified. Although the focus is on the ISO guide, the discussion is to a large extent general. The overall aim of the paper is to contribute to the further development of the area of risk assessment and risk management by strengthening its conceptual basis.

  8. Big Data in Public Health: Terminology, Machine Learning, and Privacy.

    Science.gov (United States)

    Mooney, Stephen J; Pejaver, Vikas

    2018-04-01

    The digital world is generating data at a staggering and still increasing rate. While these "big data" have unlocked novel opportunities to understand public health, they hold still greater potential for research and practice. This review explores several key issues that have arisen around big data. First, we propose a taxonomy of sources of big data to clarify terminology and identify threads common across some subtypes of big data. Next, we consider common public health research and practice uses for big data, including surveillance, hypothesis-generating research, and causal inference, while exploring the role that machine learning may play in each use. We then consider the ethical implications of the big data revolution with particular emphasis on maintaining appropriate care for privacy in a world in which technology is rapidly changing social norms regarding the need for (and even the meaning of) privacy. Finally, we make suggestions regarding structuring teams and training to succeed in working with big data in research and practice.

  9. Toroidal Continuously Variable Transmission Systems: Terminology and Present Studies

    Directory of Open Access Journals (Sweden)

    Ahmet YILDIZ

    2014-04-01

    Full Text Available The use of continuously variable transmission systems in many different areas such as aerospace, robotics, machinery and automotive industries as an alternative to conventional speed changers with constant ratio becomes widely.Especially in the automotive industry, these systems have been used increasingly, since they enable that internal combustion engines in vehicles run at optimal speeds, and consequently provide considerable fuel savings and therefore lower emission values and also they provide powerful acceleration and quiet working. CVT systems have several constructive variants such as belted, chained, balled, toroidal etc. In this paper, toroidal CVT systems based on elastohydrodynamic principles are concerned with, and fundamental works of last two decades in this field are reviewed. However, the relevant terminology and dynamics along with the control of these systems are briefly treated for better understanding of the literature mentioned. Attention is drawn to the lack of some significant issues in present research works, and potential future works are pointed out. This paper, to the authors’ knowledge, will be the first review on toroidal CVT systems in Turkish literature

  10. The cracked tooth conundrum: terminology, classification, diagnosis, and management.

    Science.gov (United States)

    Kahler, William

    2008-10-01

    To provide an overview of the clinical features, diagnosis, classification and management of cracked teeth which may be a diagnostic challenge in clinical practice. Cracks may initiate from coronal tooth structure or from within the root and affect healthy or root treated teeth. There are many terminologies and classifications in the literature for cracked teeth that can be as confusing as the array of clinical symptoms which are associated with this condition. The term "cracked tooth syndrome" is misleading as there are a range of symptoms that do not form a distinct and reliable pattern. Symptoms will vary with teeth that have healthy pulps, for teeth with inflamed or necrotic pulps, and for teeth that have been root treated. The American Association of Endodontists have classified five specific variations of cracked teeth; craze line, fractured cusp, cracked tooth, split tooth, and vertical root fracture. The importance of differentiating dentin, pulpal and periodontal pain for diagnosis and treatment for these specific entities will be elaborated. A decision flow chart indicating the treatment options available is presented.

  11. Borel hierarchies in infinite products of Polish spaces

    Indian Academy of Sciences (India)

    with two product topologies: (i) the product of copies of the Polish topology on X, so that H is again a Polish space and (ii) the product of copies of the discrete topology on X. Define now the Borel hierarchy in the larger topology on H. To do so, we need some notation. An element of H will be denoted by h = (x1,x2,...,xn,.

  12. Evaluation of the COMSOL software electro-polishing of samples

    International Nuclear Information System (INIS)

    Bruchon, M.

    2007-01-01

    The niobium electro-polishing is efficient if a viscous layer exists at the surface. In order to define parameters of samples electro-polishing, opened with difficulty to the experiments, the simulation is essential. This report presents works realized with the COMSOL software. The Nernst Planck equations have been associated to the Navier Stockes ones for an incompressible fluid. The study of the potential behaviour on the viscous layer and the mobility value have been detailed. (A.L.B.)

  13. Borel hierarchies in infinite products of Polish spaces

    Indian Academy of Sciences (India)

    E-mail: rana@isical.ac.in; maitra@stat.umn.edu. MS received 22 August 2005; revised 28 August 2006. Abstract. Let H be a product of countably infinite number of copies of an uncountable. Polish space X. Let ξ ( ξ ) be the class of Borel sets of additive class ξ for the product of copies of the discrete topology on X (the Polish ...

  14. Stem subsidence of polished and rough double-taper stems

    Science.gov (United States)

    Yamada, Kengo; Hirosaki, Kenichi; Takano, Masahiro; Matsumoto, Tadami

    2009-01-01

    Background and purpose Many clinical reports have indicated that polished hip stems show better clinical results than rough stems of the same geometry. It is still unknown, however, what the mechanical effects are of different surface finishes on the cement at the cement-bone interface. We compared mechanical effects in an in vitro cemented hip arthroplasty model. Methods Two sizes of double-taper polished stems and matt-processed polished stems (rough stems) were fixed into composite femurs. A 1-Hz dynamic load was applied to the stems for 1 million cycles. An 8-h no-load period was set after every 16 h of load. Stem subsidence within the cement, and compressive force and horizontal cement creep at the cement-bone interface, were measured. Results Compared to rough stems, stem subsidence, compressive force and cement creep for polished stems were a maximum of 4, 12, and 7-fold greater, respectively. There was a strong positive correlation between stem subsidence and compressive force for polished stems. In contrast, a strong negative correlation was found between stem subsidence and compressive force for rough stems. There was also a statistically significant relationship between compressive force on the cement and cement creep for the polished stems, but no significant relationship was found for rough stems. Interpretation This is the first evidence that different surface finishes of stems can have different mechanical effects on the cement at the cement-bone interface. Stem subsidence in polished stems resulted in compressive force on the cement and cement creep. The mechanical effects that polished taper stems impart on cement at the cement-bone interface probably contribute to their good long-term fixation and excellent clinical outcome. PMID:19421909

  15. Lexical exponents of hypothetical modality in Polish and Lithuanian

    OpenAIRE

    Roman Roszko

    2015-01-01

    Lexical exponents of hypothetical modality in Polish and Lithuanian The article focuses on the lexical exponents of hypothetical modality in Polish and Lithuanian. The purpose for comparing and contrasting the lexical exponents of hypothetical modality is not only to identify all the lexemes in both languages but also find the answer to the following question: whether the morphological exponents of hypothetical modality (so-called modus relativus) familiar to the Lithuanian language have/...

  16. Reusing Ceramic Tile Polishing Waste In Paving Block Manufacturing

    OpenAIRE

    Giordano Penteado; Carmenlucia Santos; de Carvalho; Eduardo Viviani; Cecche Lintz; Rosa Cristina

    2016-01-01

    Ceramic companies worldwide produce large amounts of polishing tile waste, which are piled up in the open air or disposed of in landfills. These wastes have such characteristics that make them potential substitutes for cement and sand in the manufacturing of concrete products. This paper investigates the use of ceramic tile polishing waste as a partial substitute for cement and sand in the manufacturer of concrete paving blocks. A concrete mix design was defined and then the sand was replaced...

  17. Color stability of nanocomposites polished with one-step systems.

    Science.gov (United States)

    Ergücü, Zeynep; Türkün, L Sebnem; Aladag, Akin

    2008-01-01

    This study compared the color changes of five novel resin composites polished with two one-step polishing systems when exposed to coffee solution. The resin composites tested were Filtek Supreme XT, Grandio, CeramX, Premise and Tetric EvoCeram. A total of 150 discs (30/resin composites, 10 x 2 mm) were fabricated. Ten specimens/resin composites cured under Mylar strips served as the control. The other samples were polished with PoGo and OptraPol discs for 30 seconds using a slow speed handpiece and immersed in coffee (Nescafé) for seven days. Color measurements were made with Vita Easyshade at baseline and after one and seven days. Repeated Measures ANOVA and Bonferroni tests were used for statistical analyses (pGrandio, there were no significant differences between the Mylar and PoGo groups, while the most stain resistant surfaces were attained with OptraPol. Removing the outermost resin layer by polishing procedures is essential to achieving a stain resistant, more esthetically stable surface. One-step polishing systems can be used successfully for polishing nanocomposites.

  18. Factors influencing the surface quality of polished tool steels

    International Nuclear Information System (INIS)

    Rebeggiani, S; Rosén, B-G

    2014-01-01

    Today’s demands on surface quality of moulds for injection moulding of plastic components involve no/low defect contents and roughness levels in the nm-range for high gloss applications. Material properties as well as operating conditions influence the mould finish, and thus the final surface of moulded products. This paper focuses on how particle content and different polishing strategies influence final surface qualities of moulds. Visual estimations of polished tool steel samples were combined with non-contact 3D-surface texture analysis in order to correlate traditional assessments to more quantitative methods, and to be able to analyse the surfaces at nanometre-level. It was found that steels with a lower proportion of particles, like carbides and oxides, gave rise to smoother polished surfaces. In a comparative study of polishers from different polishing shops, it was found that while different surface preparation strategies can lead to similar final roughness, similar preparation techniques can produce high-quality surfaces from different steel grades. However, the non-contact 3D-surface texture analysis showed that not all smooth polished surfaces have desirable functional topographies for injection moulding of glossy plastic components. (paper)

  19. Advanced method for the characterization of polishing suspensions

    Science.gov (United States)

    Trum, Christian J.; Sitzberger, Sebastian; Rascher, Rolf

    2017-06-01

    The industrial production of components for applications in the area of precision optics has a long-standing tradition in Germany. As in almost all branches of industry, the external circumstances, processes and products have changed over time. Large lots are becoming less frequent and the demand for special components is growing. In order to meet these requirements, it is necessary to adapt the production processes quickly and flexibly. In the field of chemo-mechanical polishing (CMP), this means that in addition to the process parameters such as speed, pressure and feed, the task-specific adaptation of suspension and polishing pad carriers gain in importance. Along with these changes, it is becoming increasingly important to compare and evaluate the properties of the various polishing suspensions. The procedures according to DIN 58750-3 and DIN 58750-4 are suitable for this purpose. Due to the clearly defined procedures and the constant boundary conditions, different suspensions can be compared and evaluated. The study presented here shows that this method can also lead to misinterpretations. Known relationships, such as the influence of the polishing pad, the concentration of the suspension and the influence of the processed materials play an important role. An extension of the procedure of DIN 58750-3 for the test of a polishing agent can help in a task-specific characterization of polishing slurries.

  20. Anterior cruciate ligament anatomy and function relating to anatomical reconstruction.

    Science.gov (United States)

    Zantop, Thore; Petersen, Wolf; Sekiya, Jon K; Musahl, Volker; Fu, Freddie H

    2006-10-01

    Recently, the interest in surgical techniques that reconstruct the anteromedial (AM) and the posterolateral (PL) bundles of the anterior cruciate ligament (ACL) has risen. This review focuses on the structural as well as the mechanical properties of the ACL and the anatomical details of the femoral origin, midsubstance, and tibial insertion of AM and PL bundles of the ACL. The terminology of AM and PL bundles is chosen according to the tibial insertion and determined by their functional tensioning pattern throughout knee flexion. Close to extension the AM is moderately loose and the PL is tight. As the knee is flexed, the femoral attachment of the ACL becomes more horizontally oriented, causing the AM bundle to tighten and the PM bundle to loosen up. The ACL has been described to be restraint to anterior tibial displacement and internal tibial rotation. The rotational component might be represented by the PL bundle. The femoral origin has an oval shape with the center of the AM close to over-the-top position and the center of the PL close to the anterior and inferior cartilage margin. Tibial and femoral insertions of the ACL are over 3.5 times larger when compared to the midsubstance and tunnel placement is more challenging because of the limited size of potential grafts selection of tunnel site placement. For reconstruction, both bone-patellar tendon-bone (BPTB) and quadrupled hamstring grafts are used. Structural properties of a 10 mm wide BPTB or quadrupled hamstring graft have been reported to be comparable with those of the native ACL.

  1. Polish university as an (unattractive potential employer

    Directory of Open Access Journals (Sweden)

    Baruk, Agnieszka Izabela

    2017-12-01

    Full Text Available The article presents issues associated with the reasons for the fact that young potential employees are not interested in starting work at Polish universities. The article is theoretical-empirical in character. The theoretical part highlights the importance of a situation in which an entity is regarded as an attractive employer, which allows attracting the best employees. Particular attention is paid to the fact that a university needs to build its image as an employer, which results from its characteristics. The article strives to achieve three research goals, among others, identifying the reasons why respondents are not interested in starting work at a university and arranging these reasons hierarchically. Two research hypotheses were subject to preliminary verification: H1 – the main reason for the unwillingness to start work at a university are financial aspects; H2 – the main reason for the unwillingness to start work at a university are the aspects of prestige. The data collected in course of primary research were subject to quantitative analysis based on the method of average assessment analysis and the method of factor analysis. Their results show that the respondents were not interested in work at a university mainly because they wanted to test the knowledge and skills acquired during studies in other branches. At the same time, the aspects of finances and prestige didn’t play a major role. Thus, in case of the surveyed sample of respondents both research hypotheses have to be recognized as untrue.

  2. ECOLOGICAL IDEAS IN POLISH ARCHITECTURE - ENVIRONMENTAL IMPACT

    Directory of Open Access Journals (Sweden)

    Magdalena SZPYTMA

    2016-06-01

    Full Text Available Solutions in the field of ecological architecture appear more and more often in Poland. There are two approaches to eco-design: high-tech and low-tech. High-tech focuses on the use of the latest technological solvings. These means are often used in newly designed commercial buildings, such as the first Polish office building which uses passive technology, built in Katowice, in Euro-Centrum Science and Technology Park. It is intended especially for companies focusing on energy observance issues. Low-tech is usually used in small-scale buildings (for example a cottage in Jartypory village, and is focused on the use of inexpensive, traditional technologies and the daily conscious management of natural resources. Thinking about the impact on the environment and principles of sustainable development is also present in urban planning. In Siewierz, near Katowice, Poland’s first eco-village is being built, with full infrastructure, high-quality residential buildings, shops, offices and hotels. The range of applied solutions will allow residents for the economical exploitation of these buildings.

  3. Thermodynamical motivation of the Polish energy policy

    Directory of Open Access Journals (Sweden)

    Ziębik Andrzej

    2013-02-01

    Full Text Available Basing on the first and second law of thermodynamics the fundamental trends in the Polish energy policy are analysed, including the aspects of environmental protection. The thermodynamical improvement of real processes (reduction of exergy losses is the main way leading to an improvement of the effectivity of energy consumption. If the exergy loss is economically not justified, we have to do with an error from the viewpoint of the second law analysis. The paper contains a thermodynamical analysis of the ratio of final and primary energy, as well as the analysis of the thermo-ecological cost and index of sustainable development concerning primary energy. Analyses of thermo-ecological costs concerning electricity and centralized heat production have been also carried out. The effect of increasing the share of high-efficiency cogeneration has been analyzed, too. Attention has been paid to an improved efficiency of the transmission and distribution of electricity, which is of special importance from the viewpoint of the second law analysis. The improvement of the energy effectivity in industry was analyzed on the example of physical recuperation, being of special importance from the point of view of exergy analysis.

  4. Personality of Polish gay men and women

    Directory of Open Access Journals (Sweden)

    Marcin Kwiatkowski

    2015-12-01

    Full Text Available Background Sexuality is a part of one’s identity and personality that is shaped under the influence of biological and environmental factors and interactions with society. The results of research conducted so far and concerning the personality traits of gay men and women are not consistent, and only a small number of them concern the Polish population. Hence the objective of the present research was to provide personality profiles of men and women with different sexual orientations. Participants and procedure The participants (N = 346 included 84 gay women, 82 gay men, 95 heterosexual women and 85 heterosexual men. The following measures were used: a survey developed by the author, the Kinsey Scale, the EPQ-R (Eysenck Personality Questionnaire Revised adapted by Brzozowski and Drwal (1995, and the Sixteen-factor Personality Questionnaire of Cattell adapted by Nowakowska (1970. Results The results support the hypothesis that gay women and heterosexual men share similar personality traits, while gay men have more diverse traits, similar to the traits typical for heterosexual women and men. In particular, personalities of gay men are described by such traits as progressive attitude, independence, or willingness to take risks, which means traits linked to factor Q1. The highest values of that factor are observable in the case of gay men, as compared to gay women, and also in comparison with heterosexual men and women. Conclusions Sexual orientation is responsible for differences in personality traits of the studied group to a greater extent than their biological sex.

  5. Marketing Globalisation – Polish Market Experience

    Directory of Open Access Journals (Sweden)

    Robert Nowacki

    2007-09-01

    Full Text Available The beginning of the 21st century has been yielded with an acceleration of transformations occurring in economies of the whole world. These changes relate to all the areas of economic life functioning. The most important manifestation thereof is a reinforcement of competitive phenomena. Among the most important reasons for such a state of affairs, there is mentioned globalisation. The course of its processes forces the organisation operating in the market to undertake adaptive actions. One of them is reorientation of marketing activities. The need to modify the previous marketing concepts results, first of all, from far reaching alterations in the sphere of consumption, just triggered by globalisationís impact. These trends are noticed in all the markets, also in the Polish one. The foreign enterprises operating in it more and more often use the concept of global marketing. This makes us to have reflection on what is the real effectiveness of such actions and what are the possibilities to form oneís competitive position owing to that. The article constitutes an attempt to provide answers to these questions.

  6. Automated visual inspection for polished stone manufacture

    Science.gov (United States)

    Smith, Melvyn L.; Smith, Lyndon N.

    2003-05-01

    Increased globalisation of the ornamental stone market has lead to increased competition and more rigorous product quality requirements. As such, there are strong motivators to introduce new, more effective, inspection technologies that will help enable stone processors to reduce costs, improve quality and improve productivity. Natural stone surfaces may contain a mixture of complex two-dimensional (2D) patterns and three-dimensional (3D) features. The challenge in terms of automated inspection is to develop systems able to reliably identify 3D topographic defects, either naturally occurring or resulting from polishing, in the presence of concomitant complex 2D stochastic colour patterns. The resulting real-time analysis of the defects may be used in adaptive process control, in order to avoid the wasteful production of defective product. An innovative approach, using structured light and based upon an adaptation of the photometric stereo method, has been pioneered and developed at UWE to isolate and characterize mixed 2D and 3D surface features. The method is able to undertake tasks considered beyond the capabilities of existing surface inspection techniques. The approach has been successfully applied to real stone samples, and a selection of experimental results is presented.

  7. Study on chemical mechanical polishing of silicon wafer with megasonic vibration assisted.

    Science.gov (United States)

    Zhai, Ke; He, Qing; Li, Liang; Ren, Yi

    2017-09-01

    Chemical mechanical polishing (CMP) is the primary method to realize the global planarization of silicon wafer. In order to improve this process, a novel method which combined megasonic vibration to assist chemical mechanical polishing (MA-CMP) is developed in this paper. A matching layer structure of polishing head was calculated and designed. Silicon wafers are polished by megasonic assisted chemical mechanical polishing and traditional chemical mechanical polishing respectively, both coarse polishing and precision polishing experiments were carried out. With the use of megasonic vibration, the surface roughness values Ra reduced from 22.260nm to 17.835nm in coarse polishing, and the material removal rate increased by approximately 15-25% for megasonic assisted chemical mechanical polishing relative to traditional chemical mechanical polishing. Average Surface roughness values Ra reduced from 0.509nm to 0.387nm in precision polishing. The results show that megasonic assisted chemical mechanical polishing is a feasible method to improve polishing efficiency and surface quality. The material removal and finishing mechanisms of megasonic vibration assisted polishing are investigated too. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Terminologías consensuadas en Terapia Ocupacional: marco para el entendimiento = Occupational Therapy consensus terminology: framwork to understanding

    Directory of Open Access Journals (Sweden)

    Brea Rivero, Miguel

    2008-02-01

    Full Text Available Organizaciones de terapia ocupacional de diversa naturaleza y origen han intentado a lo largo del pasado encontrar uniformidad al lenguaje profesional empleado por todos los terapeutas ocupacionales sobre el planeta. El éxito es altamente cuestionable, tomando en consideración que el procedimiento para alcanzar esta uniformidad se ha centrado fundamentalmente en la mera traducción lingüística de textos o términos sin atender a la gran diversidad conceptual, cultural y contextual, entre los países del universo que conforma la terapia ocupacional. El resultado final ha mostrado un uso parcial y sectorial de esa terminología uniforme. Con el mismo propósito pero mediante un enfoque muy diverso, un grupo de trabajo constituido por miembros de diferentes países europeos ha promovido, en el ámbito de la Red Europea de Terapia Ocupacional en Educación Superior (European Network of Occupational Therapy in Higher Education, ENOTHE en sus siglas en inglés y para el resto del documento una nueva metodología para alcanzar el fin perseguido. El énfasis se ha puesto en el concepto que subyace más allá del término y no en la mera traducción de la palabra.De igual modo, se ha considerado la diversidad cultural entre países y su variedad en el desarrollo disciplinar, y se ha tomado toda la literatura internacional como punto de referencia con el fin de realizar una búsqueda apropiada del término adecuado a cada caso. El resultado final se traduce en la producción de una base de datos que muestra definiciones consensuadas de términos considerados esenciales en terapia ocupacional. La conclusión más relevante que se puede extraer es que el uso uniforme de nuestro lenguaje profesional es posible, incluso más allá de nuestras fronteras, en la medida que seamos capaces de consensuar las raíces profundas de cada término empleado, esto es, su concepto, y no apliquemos la traducción fácil de la palabra y sin razonamiento previo. Este art

  9. Material for the Encyclopaedic Dictionary of Croatian Analytical Terminology. Part I. Principles and Starting Point

    Directory of Open Access Journals (Sweden)

    Grdinić, V

    2010-07-01

    Full Text Available Presented in this paper are the principles and the starting point for construction of an encyclopaedic dictionary of Croatian terminology in analytical chemistry, as well as in analytics, a recent scientific field. Consequently, the choice, construction and extent of lexical units for the encyclopaedic dictionary will be determined by adequate scientific and professional criteria. Principles and methods determined and presented in this paper can aid in writing Croatian analytical dictionary and support the efforts in systemizing and encyclopaedic presentation of terms that are of particular significance for analytics. The described principles take into account terminological and linguistic demands. The paper stresses the need for revision of current and non-systemized terminology, adjustment of unavoidable internationalisms to Croatian linguistic standards, and, as analytical chemistry is a science of chemical measurements, adjustment of terminology to existing Croatian standards in metrology and other related areas.

  10. Group word terms in the terminology of the theory of mechanics in Albanian and English

    Directory of Open Access Journals (Sweden)

    GANI PLLANA

    2013-12-01

    Full Text Available As it is known, the terminology of any knowledge field as an independent system, as well as the terminology of mechanics consisting of nominating one-word and group word units (among which, particularly the latter phrase terms make up nearly 70-80% of the overall terminological vocabulary. Looking at it from this point of view, all monosyllabic (one word terms (word terms would also be accepted as a basic vocabulary in the terminology of mechanics. This can be justified more so by the fact that almost every word term serves as the foundation for the construction of numerous group word terms that mark concepts which have spread out into numerous branches. These having been introduced through a variety of many different interrelations, like gender / type, whole / part etc.

  11. Notes on Agricultural Terminology in Aristotle (Sens. 441a10-17)

    DEFF Research Database (Denmark)

    Bloch, David Kristian

    2006-01-01

    This article examines Aristotle's terminology in a much debated passage of the De Sensu et Sensibilibus. Based on this examination, the text itself and the conjectures that have so far been proposed are discussed....

  12. 78 FR 46499 - Change in Terminology: “Mental Retardation” to “Intellectual Disability”

    Science.gov (United States)

    2013-08-01

    ... Change in Terminology: ``Mental Retardation'' to ``Intellectual Disability'' AGENCY: Social Security... ``mental retardation'' with ``intellectual disability'' in our Listing of Impairments (listings) that we... widespread adoption of the term ``intellectual disability'' by Congress, government agencies, and various...

  13. 78 FR 5755 - Change in Terminology: “Mental Retardation” to “Intellectual Disability”

    Science.gov (United States)

    2013-01-28

    ... Change in Terminology: ``Mental Retardation'' to ``Intellectual Disability'' AGENCY: Social Security... retardation'' with ``intellectual disability'' in our Listing of Impairments (listings) that we use to... adoption of the term ``intellectual disability'' by Congress, government agencies, and various public and...

  14. Terminology and classification of muscle injuries in sport: the Munich consensus statement

    NARCIS (Netherlands)

    Mueller-Wohlfahrt, Hans-Wilhelm; Haensel, Lutz; Mithoefer, Kai; Ekstrand, Jan; English, Bryan; McNally, Steven; Orchard, John; van Dijk, C. Niek; Kerkhoffs, Gino M.; Schamasch, Patrick; Blottner, Dieter; Swaerd, Leif; Goedhart, Edwin; Ueblacker, Peter

    2013-01-01

    To provide a clear terminology and classification of muscle injuries in order to facilitate effective communication among medical practitioners and development of systematic treatment strategies. Thirty native English-speaking scientists and team doctors of national and first division professional

  15. A review on the risk management terminology for the use in standards

    International Nuclear Information System (INIS)

    Lee, Yong Hee; Lee, Jung Woon

    2001-03-01

    This technical report describes a result of reviews on the risk management terminology for the use in standards. Experiences in related technical fields and their definitions are reviewed according to the concepts and operational definitions of risk terminologies. It results into a draft standard for KS in the fields of product safety. Quality Assurance, Industrial and Occupational Safety, Financial Management and Risk Management, and others may show many different definitions for their own technical purpose. A draft KS standard for risk terminology must be revised and enhanced to be adopted to the product safety. However, this review does not provide a strict guide for use in the operational definitions of risk terms, but does provide a common base among application areas. The result of this review is submitted to Korea Standard Association in form of a draft KS standards, KS X 0000 : 2001 (ISO TBD : 1999), titled as ' Risk management terminology - Guidelines for use in standards '

  16. Terminology supported archiving and publication of environmental science data in PANGAEA.

    Science.gov (United States)

    Diepenbroek, Michael; Schindler, Uwe; Huber, Robert; Pesant, Stéphane; Stocker, Markus; Felden, Janine; Buss, Melanie; Weinrebe, Matthias

    2017-11-10

    Exemplified on the information system PANGAEA, we describe the application of terminologies for archiving and publishing environmental science data. A terminology catalogue (TC) was embedded into the system, with interfaces allowing to replicate and to manually work on terminologies. For data ingest and archiving, we show how the TC can improve structuring and harmonizing lineage and content descriptions of data sets. Key is the conceptualization of measurement and observation types (parameters) and methods, for which we have implemented a basic syntax and rule set. For data access and dissemination, we have improved findability of data through enrichment of metadata with TC terms. Semantic annotations, e.g. adding term concepts (including synonyms and hierarchies) or mapped terms of different terminologies, facilitate comprehensive data retrievals. The PANGAEA thesaurus of classifying terms, which is part of the TC is used as an umbrella vocabulary that links the various domains and allows drill downs and side drills with various facets. Furthermore, we describe how TC terms can be linked to nominal data values. This improves data harmonization and facilitates structural transformation of heterogeneous data sets to a common schema. Technical developments are complemented by work on the metadata content. Over the last 20 years, more than 100 new parameters have been defined on average per week. Recently, PANGAEA has increasingly been submitting new terms to various terminology services. Matching terms from terminology services with our parameter or method strings is supported programmatically. However, the process ultimately needs manual input by domain experts. The quality of terminology services is an additional limiting factor, and varies with respect to content, editorial, interoperability, and sustainability. Good quality terminology services are the building blocks for the conceptualization of parameters and methods. In our view, they are essential for data

  17. Notes on Agricultural Terminology in Aristotle (Sens. 441a10-17)

    DEFF Research Database (Denmark)

    Bloch, David Kristian

    2006-01-01

    This article examines Aristotle's terminology in a much debated passage of the De Sensu et Sensibilibus. Based on this examination, the text itself and the conjectures that have so far been proposed are discussed.......This article examines Aristotle's terminology in a much debated passage of the De Sensu et Sensibilibus. Based on this examination, the text itself and the conjectures that have so far been proposed are discussed....

  18. A quest for the right word enhancing reflexivity and technology in terminology training

    OpenAIRE

    Albuquerque, Alexandra; Silva, Manuel Moreira da

    2010-01-01

    INTED2010, the 4th International Technology, Education and Development Conference was held in Valencia (Spain), on March 8, 9 and 10, 2010. When it comes to translators training, the acquisition of indexing and terminological competences (both at retrieval and management stage) has a major role in the performance of future translators. A good terminological database, as a result of an accurate research, along with computer assisted translation tools (CAT tools) can improve transla...

  19. World-Building Models of English and Spanish Business Terminology as Reflection of National Morphosyntactic Mentality

    OpenAIRE

    Елена Андреевна Литягина

    2015-01-01

    The article is devoted to the comparative analysis of the word-building models of the English and Spanish business terminology. The aim of this article is to hold a contrastive analysis of such word-building models of the English and Spanish business terminology as abbreviation, composition, conversion, contamination, apocope, stress changing, sound alteration, to find out existing differences an similarities in the world-building process in both languages and to investigate the concept “glob...

  20. Cognitive approach to the construction of three-language terminological thesaurus

    Directory of Open Access Journals (Sweden)

    Grigorij Chetverikov

    2015-11-01

    Full Text Available Cognitive approach to the construction of three-language terminological thesaurus The paper is devoted to developing a lexicographic database of a three-language terminological dictionary. The detailed analysis of a relations scheme between tables and structures of tables with the help of three-layer decomposition predicate method is carried out, which has allowed to define ways of solving direct and reversible three-language electronic dictionaries creation problem.

  1. Development of a Model for the Representation of Nanotechnology-Specific Terminology

    Science.gov (United States)

    Bailey, LeeAnn O.; Kennedy, Christopher H.; Fritts, Martin J.; Hartel, Francis W.

    2006-01-01

    Nanotechnology is an important, rapidly-evolving, multidisciplinary field [1]. The tremendous growth in this area necessitates the establishment of a common, open-source terminology to support the diverse biomedical applications of nanotechnology. Currently, the consensus process to define and categorize conceptual entities pertaining to nanotechnology is in a rudimentary stage. We have constructed a nanotechnology-specific conceptual hierarchy that can be utilized by end users to retrieve accurate, controlled terminology regarding emerging nanotechnology and corresponding clinical applications. PMID:17238469

  2. The smallest divisions of time: terminological and lexicographical aspects

    Directory of Open Access Journals (Sweden)

    Francisco Javier Sánchez Martín

    2012-12-01

    Full Text Available This study of the ancient divisible units of the hours of day (the terms borrowed from latin: átomo, cuadrante, momento, punto and uncia use the principal sources of the medieval and Renaissance works. With regard to the former, an example of the cultural transmission of this specialized lexicon can be seen in its reception in The Etymologies of Saint Isidore (c. 560-636 and in the Libro de las propiedades de las cosas of Bartolomé Ánglico (1240, an encyclopaedia that had an extraordinary reception in Western Europe until the sixteenth century. Amongst the Renaissance sources several studies stand out: Chronographía or Reportorio de los tiempos (1545 by Jerónimo de Chaves, the anonymous book Repertorio de los tiempos (1554 and Chronographía y Repertorio de los tiempos (1585 by Francisco Vicente de Tornamira, a set of treatises which includes the knowledge compiled in the medieval encyclopaedias mentioned above. These works allow us to verify the transmission of this lexicon, in a stage marked by the growing interest in metrological issues. The analysis of this terminology reflects the semantic connections established between the various dimensions (weight, space and time as its semantic reference moves from the spatial domain to the that of time and relationships are attested in the earliest dictionaries of the Spanish language.

  3. Parental perceptions of weight terminology that providers use with youth.

    Science.gov (United States)

    Puhl, Rebecca M; Peterson, Jamie Lee; Luedicke, Joerg

    2011-10-01

    Little research has been performed to examine patient perceptions of weight-related language, especially related to childhood obesity. In this study we assessed parental perceptions of weight-based terminology used by health care providers to describe a child's excess weight and assessed perceived connotations associated with these terms including stigma, blame, and motivation to reduce weight. A national sample of American parents with children aged 2 to 18 years (N = 445) completed an online survey to assess their perceptions of 10 common terms to describe excess body weight in youth (including "extremely obese," "high BMI," "weight problem," "unhealthy weight," "weight," "heavy," "obese," "overweight," "chubby," and "fat"). Parents were asked to use a 5-point rating scale to indicate how much they perceived each term to be desirable, stigmatizing, blaming, or motivating to lose weight. Regression models revealed that the terms "weight" and "unhealthy weight" were rated as most desirable, and "unhealthy weight" and "weight problem" were rated as the most motivating to lose weight. The terms "fat," "obese," and "extremely obese" were rated as the most undesirable, stigmatizing, blaming, and least motivating. Parents' ratings were consistent across sociodemographic variables, body weight, and child's body weight. The results of this study have important implications for the improvement of health care for youth with obesity; it may be advantageous for health care providers to use or avoid using specific weight-based language during discussions about body weight with families. Pediatricians play a key role in obesity prevention and treatment, but their efforts may be undermined by stigmatizing or offensive language that can hinder important discussions about children's health.

  4. Effect of various polishing systems on the surface roughness and phase transformation of zirconia and the durability of the polishing systems.

    Science.gov (United States)

    Park, Chan; Vang, Mong-Sook; Park, Sang-Won; Lim, Hyun-Pil

    2017-03-01

    Although many systems are used to polish zirconia, a comparison of the performance of zirconia and feldspathic porcelain polishing systems is lacking. The purpose of this in vitro study was to compare the effects of 3 polishing systems on surface roughness, zirconia phase transformation, and durability of the polishing systems when applied to zirconia and feldspathic porcelain. Three polishing systems were evaluated: Z1, a zirconia polishing system; Z2, a zirconia polishing system, and F1, a feldspathic porcelain polishing system. Three ceramic systems were evaluated: PR and ZM zirconia specimens (diameter 15 mm, height 2 mm; 23 specimens each) and CB feldspathic porcelain specimens of the same size (15 specimens). A rough surface was created on the 3 types of specimens (15 specimens each) to model an occlusal adjustment under the same conditions. Polishing was carried out with the 3 polishing systems for 2 minutes each. Surface roughness was measured with a 3-dimensional (3D) optical profiler. The surface was also observed with a scanning electron microscopy. X-ray diffraction analysis was performed for 8 PR or ZM zirconia specimens polished by using the Z1 and Z2 systems for 8 minutes to evaluate the phase transformation of zirconia before, during, and after polishing. These specimens were compared and analyzed for phase transformation that might have occurred during the polishing of the specimens. After finishing the surface roughness experiment and the phase transformation experiment, the volumes of the polishers were measured with a 3D volume scanner and compared with those before the experiments to evaluate the durability of the polishing system. A statistical analysis of all data was performed using 2-way ANOVA and the Tukey honest significant difference test (α=.05). The 2 zirconia polishing systems (Z1, Z2) created a significantly (Pzirconia specimens for 8 minutes, the maximum percentages of monoclinic phase increased by 0.03% in the Z1 system and by 0

  5. Computer-Controlled Cylindrical Polishing Process for Development of Grazing Incidence Optics for Hard X-Ray Region

    Science.gov (United States)

    Khan, Gufran Sayeed; Gubarev, Mikhail; Speegle, Chet; Ramsey, Brian

    2010-01-01

    The presentation includes grazing incidence X-ray optics, motivation and challenges, mid spatial frequency generation in cylindrical polishing, design considerations for polishing lap, simulation studies and experimental results, future scope, and summary. Topics include current status of replication optics technology, cylindrical polishing process using large size polishing lap, non-conformance of polishin lap to the optics, development of software and polishing machine, deterministic prediction of polishing, polishing experiment under optimum conditions, and polishing experiment based on known error profile. Future plans include determination of non-uniformity in the polishing lap compliance, development of a polishing sequence based on a known error profile of the specimen, software for generating a mandrel polishing sequence, design an development of a flexible polishing lap, and computer controlled localized polishing process.

  6. A Review of Auditing Methods Applied to the Content of Controlled Biomedical Terminologies

    Science.gov (United States)

    Zhu, Xinxin; Fan, Jung-Wei; Baorto, David M.; Weng, Chunhua; Cimino, James J.

    2012-01-01

    Although controlled biomedical terminologies have been with us for centuries, it is only in the last couple of decades that close attention has been paid to the quality of these terminologies. The result of this attention has been the development of auditing methods that apply formal methods to assessing whether terminologies are complete and accurate. We have performed an extensive literature review to identify published descriptions of these methods and have created a framework for characterizing them. The framework considers manual, systematic and heuristic methods that use knowledge (within or external to the terminology) to measure quality factors of different aspects of the terminology content (terms, semantic classification, and semantic relationships). The quality factors examined included concept orientation, consistency, non-redundancy, soundness and comprehensive coverage. We reviewed 130 studies that were retrieved based on keyword search on publications in PubMed, and present our assessment of how they fit into our framework. We also identify which terminologies have been audited with the methods and provide examples to illustrate each part of the framework. PMID:19285571

  7. Nurse's use of power to standardise nursing terminology in electronic health records.

    Science.gov (United States)

    Ali, Samira; Sieloff, Christina L

    2017-07-01

    To describe nurses' use of power to influence the incorporation of standardised nursing terminology within electronic health records. Little is known about nurses' potential use of power to influence the incorporation of standardised nursing terminology within electronic health records. The theory of group power within organisations informed the design of the descriptive, cross-sectional study used a survey method to assess nurses' use of power to influence the incorporation of standardised nursing terminology within electronic health records. The Sieloff-King Assessment of Group Power within Organizations © and Nursing Power Scale was used. A total of 232 nurses responded to the survey. The mean power capability score was moderately high at 134.22 (SD 18.49), suggesting that nurses could use power to achieve the incorporation of standardised nursing terminology within electronic health records. The nurses' power capacity was significantly correlated with their power capability (r = 0.96, P power to achieve their goals, such as the incorporation of standardised nursing terminology within electronic health records. Nurse administrators may use their power to influence the incorporation of standardised nursing terminology within electronic health records. If nurses lack power, this could decrease nurses' ability to achieve their goals and contribute to the achievement of effective patient outcomes. © 2017 John Wiley & Sons Ltd.

  8. Antagonist wear by polished zirconia crowns.

    Science.gov (United States)

    Hartkamp, Oliver; Lohbauer, Ulrich; Reich, Sven

    The aim of this in vivo study was to measure antagonist wear caused by polished monolithic posterior zirconia crowns over a 24-month period using the intraoral digital impression (IDI) technique. Thirteen zirconia crowns were placed in nine patients. The crowns and adjacent teeth were captured using an intraoral scanner (Lava C.O.S.). The corresponding antagonist teeth and the respective neighboring teeth were also scanned. Scanning was performed immediately after the restoration (baseline) as well as 12 and 24 months after crown placement. Geomagic Qualify software was used to superimpose the follow-up data sets onto the corresponding baseline data set, identify wear sites, and measure maximum vertical height loss in each individual wear site. Overall antagonist wear was then determined as the mean of wear rates measured in all of the individual antagonist units. In addition, wear rates in enamel and ceramic antagonists were analyzed as part of the scope of this study. The maximum mean wear with standard deviation (SD) in the overall sample with a total of nine patients, 13 antagonist units, and 98 evaluable wear sites was 86 ± 23 µm at 12 months, and 103 ± 39 µm at 24 months. The maximum mean wear in the enamel antagonist subgroup was 87 ± 41 µm at 12 months, and 115 ± 71 µm at 24 months; and in the ceramic antagonist subgroup 107 ± 22 µm at 12 months, and 120 ± 27 µm at 24 months. The wear rates determined in this study are comparable to those of existing studies. The IDI technique of wear analysis can be carried out in a practical manner and produces useful results.

  9. Germanium content in Polish hard coals

    Directory of Open Access Journals (Sweden)

    Makowska Dorota

    2016-01-01

    Full Text Available Due to the policy of the European Union, it is necessary to search for new sources of scarce raw materials. One of these materials is germanium, listed as a critical element. This semi-metal is widely used in the electronics industry, for example in the production of semiconductors, fibre optics and solar cells. Coal and fly ash from its combustion and gasification for a long time have been considered as a potential source of many critical elements, particularly germanium. The paper presents the results of germanium content determination in the Polish hard coal. 23 coal samples of various coal ranks were analysed. The samples were collected from 15 mines of the Upper Silesian Coal Basin and from one mine of the Lublin Coal Basin. The determination of germanium content was performed with the use of Atomic Absorption Spectrometry with Electrothermal Atomization (GFAAS. The investigation showed that germanium content in the analysed samples was at least twice lower than the average content of this element in the hard coals analysed so far and was in the range of 0.08 ÷ 1.28 mg/kg. Moreover, the content of Ge in the ashes from the studied coals does not exceed 15 mg/kg, which is lower than the average value of Ge content in the coal ashes. The highest content of this element characterizes coals of the Lublin Coal Basin and young coals type 31 from the Vistula region. The results indicate a low utility of the analysed coal ashes as a source of the recovery of germanium. On the basis of the analyses, the lack of the relationship between the content of the element and the ash content in the tested coals was noted. For coals of the Upper Silesian Coal Basin, the relationship between the content of germanium in the ashes and the depth of the seam was observed.

  10. Studies on polishing of Ti and Ag-Pd-Cu-Au alloy with five dental abrasives.

    Science.gov (United States)

    Hirata, T; Nakamura, T; Takashima, F; Maruyama, T; Taira, M; Takahashi, J

    2001-08-01

    Titanium (Ti) and Ag-Pd-Cu-Au alloy were examined for their polishing behaviour by conducting manually controlled polishing tests using five dental abrasives [carborundum point (CR) and silicone points (R1 and R2)] driven by a high torque micromotor with rotational speeds ranging from 2000 to 15 000 r.p.m. Polishing of Ti resulted in less volume of removal upon polishing, a rougher surface and larger loss of abrasives, compared with polishing of Ag-Pd-Cu-Au alloy. Polishing of Ti with a rotational speed of 15 000 r.p.m. led to the largest volume of removal upon polishing, whilst that of 10 000 r.p.m. produced the optimal volume for Ag-Pd-Cu-Au alloy. It was concluded that Ti was much more difficult to polish, requiring special care (e.g. frequent exchange of abrasives). Development of new abrasives for polishing Ti is required.

  11. The study of optimization on process parameters of high-accuracy computerized numerical control polishing

    Science.gov (United States)

    Huang, Wei-Ren; Huang, Shih-Pu; Tsai, Tsung-Yueh; Lin, Yi-Jyun; Yu, Zong-Ru; Kuo, Ching-Hsiang; Hsu, Wei-Yao; Young, Hong-Tsu

    2017-09-01

    Spherical lenses lead to forming spherical aberration and reduced optical performance. Consequently, in practice optical system shall apply a combination of spherical lenses for aberration correction. Thus, the volume of the optical system increased. In modern optical systems, aspherical lenses have been widely used because of their high optical performance with less optical components. However, aspherical surfaces cannot be fabricated by traditional full aperture polishing process due to their varying curvature. Sub-aperture computer numerical control (CNC) polishing is adopted for aspherical surface fabrication in recent years. By using CNC polishing process, mid-spatial frequency (MSF) error is normally accompanied during this process. And the MSF surface texture of optics decreases the optical performance for high precision optical system, especially for short-wavelength applications. Based on a bonnet polishing CNC machine, this study focuses on the relationship between MSF surface texture and CNC polishing parameters, which include feed rate, head speed, track spacing and path direction. The power spectral density (PSD) analysis is used to judge the MSF level caused by those polishing parameters. The test results show that controlling the removal depth of single polishing path, through the feed rate, and without same direction polishing path for higher total removal depth can efficiently reduce the MSF error. To verify the optical polishing parameters, we divided a correction polishing process to several polishing runs with different direction polishing paths. Compare to one shot polishing run, multi-direction path polishing plan could produce better surface quality on the optics.

  12. Names of Inedible and Poisonous Mushrooms in Ukrainian and Polish – Semantic Analysis

    Directory of Open Access Journals (Sweden)

    Jóźwikiewicz Przemysław

    2016-08-01

    Full Text Available Background: The author of the article attempts to initiate a scholarly discourse on mycological vocabulary, especially the names of macrofungi (macromycetes, a valid issue which still has not been fully described. He proposes a contrastive analysis (Ukrainian-Polish of the discourse on the contemporary mycological vocabulary functioning in various texts: scientific, popular science, literature, as well as folklore. Purpose: The purpose of the article was to characterize selected sources of mycological vocabulary and present Ukrainian and Polish research. Furthermore, the author wanted to propose a preliminary semantic analysis of selected Ukrainian and Polish names of inedible and poisonous mushrooms (particularly those that can be found in both countries. Results: Myconims are direct or indirect references to the specific characteristics of fungi. The article contains a table containing 92 official names of the most common inedible and poisonous fungi in Poland and Ukraine (Latin, Ukrainian, and Polish names. This list can be expanded with further hundreds of names, since, as mycologists and mushroom researchers claim, there is approx. 4 thousand species of macrofungi on the territory of Ukraine and Poland. In the article the official names of Ukrainian and Polish inedible and poisonous mushrooms were classified into eight groups. Elements most frequently co-creating the collected myconims (comparable for both languages are lexemes indicating: the color of the cap or the fruiting body, the place and manner of its occurrence, the overall appearance of the fruiting body. Significant, especially for the Ukrainian names of mushrooms, is the presence of Latinisms, which is characteristic of Ukrainian specialized terminology, such as the medical one (eg. cirrhosis hepatis, цироз печінки; glomerulonephritis, гломерулонефрит; appendicitis acuta, апендицит etc.. Most myconims, both Polish and Ukrainian, are two

  13. Infestation of Polish Agricultural Soils by Plasmodiophora Brassicae Along The Polish-Ukrainian Border

    Directory of Open Access Journals (Sweden)

    Jędryczka Małgorzata

    2014-07-01

    Full Text Available There has been a rapid, worldwide increase in oilseed rape production that has resulted in enormous intensification of oilseed rape cultivation, leading to tight rotations. This in turn, has caused an accumulation of pests as well as foliar and soil-borne diseases. Recently, clubroot has become one of the biggest concerns of oilseed rape growers. Clubroot is caused by the soil-borne protist Plasmodiophora brassicae Woronin. The pathogen may be present in groundwater, lakes, and irrigation water used in sprinkling systems. It can be easily transmitted from one field to another not only by water, but also by soil particles and dust transmitted by wind and on machinery. The aim of our overall study was to check for P. brassicae infestation of Polish agricultural soils. This paper presents the 2012 results of a study performed along the Polish-Ukrainian border in two provinces: Lublin (Lubelskie Voivodeship and the Carpathian Foothills (Podkarpackie Voivodeship, in south-east Poland. Monitoring was done in 11 counties, including nine rural and two municipal ones. In total, 40 samples were collected, out of which 36 were collected from fields located in rural areas and four from municipal areas, with two per municipal region. Each sample was collected at 8-10 sites per field, using a soil auger. The biotest to detect the presence of P. brassicae was done under greenhouse conditions using seedlings of the susceptible Brassicas: B. rapa ssp. pekinensis and the Polish variety of oilseed rape B. napus cv. Monolit. Susceptible plants grown in heavily infested soils produced galls on their roots. A county was regarded as free from the pathogen, if none of the bait plants became infected. The pathogen was found in three out of 40 fields monitored (7.5% in the Carpathian Foothill region. The fields were located in two rural counties. The pathogen was not found in Lublin province, and was also not detected in any of the municipal counties. The detection with

  14. Delayed polishing technique on glass–ionomer restorations

    Directory of Open Access Journals (Sweden)

    Masao Irie

    2009-05-01

    Full Text Available This in vitro study evaluated the effect of polishing after 1-day storage in water on the gap-formation around a Class V and Class I restorations, using a resin-modified glass–ionomer and a conventional glass–ionomer materials. The study also examined the gap-formation in another two different cervical restorations, a cervical cavity: incisally bordered by enamel and cervically by dentin and a root surface cavity of these restorative materials, which may be effects of this polishing procedure. This study evaluated the effects of delayed versus immediate polishing to permit maturation on: (1 interfacial gap-formation around resin-modified (RMGIC and conventional (CGIC in three types of cervical restorations, (2 interfacial gap-formation around highly viscous conventional glass–ionomer cement (HCGIC in Class I restorations. After polishing procedure, either: (i immediately (3 or 6 min after setting or (ii after 24 h storage, the maximum the restored teeth were sectioned in a mesio-distal direction through the center of the restorations. The presence or absence of interfacial-gaps was measured at 14 points (each 0.5-mm apart along the cavity restoration interface. For various restorative cases, significant differences (p < 0.05 in gap-width or gap-incidence, were observed between polishing (i immediately and (ii after 1-day storage.

  15. Nail polish as a source of exposure to triphenyl phosphate.

    Science.gov (United States)

    Mendelsohn, Emma; Hagopian, Audrey; Hoffman, Kate; Butt, Craig M; Lorenzo, Amelia; Congleton, Johanna; Webster, Thomas F; Stapleton, Heather M

    2016-01-01

    Triphenyl phosphate (TPHP) is primarily used as either a flame retardant or plasticizer, and is listed as an ingredient in nail polishes. However, the concentration of TPHP in nail polish and the extent of human exposure following applications have not been previously studied. We measured TPHP in ten different nail polish samples purchased from department stores and pharmacies in 2013-2014. Concentrations up to 1.68% TPHP by weight were detected in eight samples, including two that did not list TPHP as an ingredient. Two cohorts (n=26 participants) were recruited to assess fingernail painting as a pathway of TPHP exposure. Participants provided urine samples before and after applying one brand of polish containing 0.97% TPHP by weight. Diphenyl phosphate (DPHP), a TPHP metabolite, was then measured in urine samples (n=411) and found to increase nearly seven-fold 10-14h after fingernail painting (pexposure, ten participants also painted their nails and painted synthetic nails adhered to gloves on two separate occasions, and collected urine for 24h following applications. Urinary DPHP was significantly diminished when wearing gloves, suggesting that the primary exposure route is dermal. Our results indicate that nail polish may be a significant source of short-term TPHP exposure and a source of chronic exposure for frequent users or those occupationally exposed. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Unsustaineble pseudo-urban consequences of legal and urban terminology

    Directory of Open Access Journals (Sweden)

    Ćerimović Velimir Lj.

    2011-01-01

    Full Text Available City planning is a complex task and through this work we face the space and natural resources that expose the exploitation (that are to be exploited and prone to unsustainable change. Often without environmental responsibility and the imperative of creating certain measures we make superstructure no matter how much the environment may be disrupted, and whether such relationships create a better society, better network of urban settlements and a better man. At that may also affect our knowledge which is often due to a variety of doctrines and legislative regulations that are applied in the planning and management space. From this it can be seen that modern architecture did not contribute to the creation of better cities. Also, urban planning is mainly restricted to the regulation and it neglected the creative action, regional-planning is lost in theoretical research, while the consideration of the whole problem is abandoned. In addition to this, in today’s transitional terms and the domineering (dominant urban crisis unsustainable combination and identification of the “2D” and the “3D” terminology is recognizable, which is only indicators that in the field of urban planning some transitional trends are prevailing. This unsustainable state of affairs in the transitional planning of urban areas can be applied in the most suitable way to pseudo-urbanization, sub-urbanization, unbalanced eco-reciprocity, non-standard construction of the urban tissue, discontinuity inherited and newly constructed urban substance. In this regard, consequently expressed negative environmental legacy of reproduction and the increased effect of the negative consequences of greenhouse gases from the threatening climate change, only shows that urban planners are not sinless and, they more or less (unconsciously complicit and participate in the contamination of urban and environment. In the end, it definitely guides us to the need to leave or transformation of the

  17. Treatment of lumbar disc herniation with radiculopathy. Clinical practice guidelines endorsed by The Polish Society of Spinal Surgery.

    Science.gov (United States)

    Latka, Dariusz; Miekisiak, Grzegorz; Jarmuzek, Pawel; Lachowski, Marcin; Kaczmarczyk, Jacek

    2016-01-01

    Herniated lumbar disc (HLD) is arguably the most common spinal disorder requiring surgical intervention. Although the term is fairly straightforward, the exact pathology and thus the clinical picture and natural history may vary. Therefore, it is immensely difficult to formulate universal guidelines for surgical treatment. The aim of this paper is to organize the terminology and clear the inconsistencies in phraseology, review treatment options and gather available published evidence to address the clinical questions to create a set of clinical guidelines in relevant to the topic. Twelve queries, addressing optimal surgical treatment of the HLD have been formulated. The results, based on the literature review are described in the present work. The final product of the analysis was a set of guidelines for the surgical treatment of symptomatic HLD. Categorized into four tiers based on the level of evidence (I-III and X), they have been designed to assist in the selection of optimal, effective treatment leading to the successful outcome. The evidence based medicine (EBM) is becoming ever more popular among spinal surgeons. Unfortunately this is not always feasible. Lack of uniform guidelines and numerous conflicts of interest introduce flaws in the decision making process. The key role of experts and professional societies is to provide high value recommendation based on the most current literature. Present work contains a set of guidelines for the surgical treatment of HLD officially endorsed by the Polish Spine Surgery Society. Copyright © 2015 Polish Neurological Society. Published by Elsevier Urban & Partner Sp. z o.o. All rights reserved.

  18. Nomenclatura anatômica em oftalmologia Anatomical nomenclature in ophthalmology

    Directory of Open Access Journals (Sweden)

    Ricardo Lamy

    2008-06-01

    Full Text Available Os objetivos deste estudo são: informar os oftalmologistas sobre as diferenças existentes entre as listas em língua inglesa e portuguesa de termos equivalentes para as estruturas do olho, ambas aprovadas pela Comissão Federativa Internacional de Terminologia Anatômica; apresentar os termos anatômicos incluídos na lista de descritores publicada pela Biblioteca Nacional de Medicina Norte-Americana e traduzida pela Biblioteca Regional de Medicina (BIREME; para propor uma lista em português de termos de uso comum pelos oftalmologistas.The purposes of this article are: to inform ophthalmologists about the differences between the English and Portuguese list of equivalent terms for eye structures, approved by the Federative International Committee on Anatomical Terminology; to present the anatomical terms included in the list of medical subject headings published by the United States National Library of Medicine and translated by the Regional Library of Medicine (BIREME; propose a list of Portuguese terms of common usage by ophthalmologists.

  19. Anatomic characterization of the radial and ulnar nutrient arteries in humans.

    Science.gov (United States)

    Kinose, Shota; Kanaya, Yosuke; Kawasaki, Yuto; Okamura, Taro; Kato, Kota; Sakai, Tatsuo; Ichimura, Koichiro

    2018-03-01

    The localization of nutrient foramens has been extensively studied in humans and other vertebrate animals. However, accurate information on the origin and extraosseous course of the nutrient arteries in some types of long tubular bones is lacking. Terminologia Anatomica, the international standard on human anatomic terminology, lists the radial nutrient artery (RNA) and the ulnar nutrient artery (UNA) as branches of the radial and ulnar arteries, respectively. Anatomy textbooks published in both German- and English-speaking countries regard both the RNA and UNA as branches of the anterior interosseous artery. To clarify the anatomic characteristics of the RNA and UNA in humans, we reexamined the origin and course of these arteries by cadaveric dissection. Almost all RNAs and UNAs branched from the ulnar artery or its tributaries. In typical cases, the RNA branched from the anterior interosseous artery and the UNA branched from the proximal part of the ulnar artery or the anterior interosseous artery. These findings are reasonable from the perspective of regional anatomy, since the ulnar artery passes more deeply than the radial artery in the proximal forearm and thus the proximal part of the ulnar artery and its major branches are situated more closely to the radial and ulnar nutrient foramens. Based on our findings, it is necessary to correct the position of the RNA and UNA in the arterial hierarchy of T. Anatomica for accurate morphological description. Copyright © 2017 Elsevier GmbH. All rights reserved.

  20. Total Mesorectal Excision, an erroneous anatomical term for the gold standard in rectal cancer treatment.

    Science.gov (United States)

    Rodríguez-Luna, María Rita; Guarneros-Zárate, Joaquín E; Tueme-Izaguirre, Jorge

    2015-11-01

    In 1986 Professor R J Heald published in The Lancet his new technique which he called Total Mesorectal Excision; today this is the gold standard for the surgical management of rectal cancer. In Total Mesorectal Excision (TME), the mesorectum is the term used to describe all the peri-rectal connective tissue including the posterior sheath of the endopelvic fascia containing the peri-rectal neurovascular structures. However, the mesenterium is a defined structure composed of a double layer of peritoneum which does not include the endopelvic fascia and the lateral rectal stalks, so these should not be included in the term 'mesorectum'. In our globalized medical culture it is important to use anatomic terms approved by the International Federation of Associations of Anatomists, as contained in the Terminologia Anatomica produced by the Federative International Programme for Anatomical Terminology (FIPAT). The term mesorectum is not listed in the Terminologia Anatomica. Copyright © 2015 IJS Publishing Group Limited. Published by Elsevier Ltd. All rights reserved.

  1. Determining customer satisfaction in anatomic pathology.

    Science.gov (United States)

    Zarbo, Richard J

    2006-05-01

    Measurement of physicians' and patients' satisfaction with laboratory services has become a standard practice in the United States, prompted by national accreditation requirements. Unlike other surveys of hospital-, outpatient care-, or physician-related activities, no ongoing, comprehensive customer satisfaction survey of anatomic pathology services is available for subscription that would allow continual benchmarking against peer laboratories. Pathologists, therefore, must often design their own local assessment tools to determine physician satisfaction in anatomic pathology. To describe satisfaction survey design that would elicit specific information from physician customers about key elements of anatomic pathology services. The author shares his experience in biannually assessing customer satisfaction in anatomic pathology with survey tools designed at the Henry Ford Hospital, Detroit, Mich. Benchmarks for physician satisfaction, opportunities for improvement, and characteristics that correlated with a high level of physician satisfaction were identified nationally from a standardized survey tool used by 94 laboratories in the 2001 College of American Pathologists Q-Probes quality improvement program. In general, physicians are most satisfied with professional diagnostic services and least satisfied with pathology services related to poor communication. A well-designed and conducted customer satisfaction survey is an opportunity for pathologists to periodically educate physician customers about services offered, manage unrealistic expectations, and understand the evolving needs of the physician customer. Armed with current information from physician customers, the pathologist is better able to strategically plan for resources that facilitate performance improvements in anatomic pathology laboratory services that align with evolving clinical needs in health care delivery.

  2. [Polish medical ethics in the period 1945-1980].

    Science.gov (United States)

    Wichrowski, Marek

    2003-01-01

    The purpose of this article is o present that main currents of Polish medical ethics in the years 1945-1980, which the author treats as the 'prehistory' of Poland's contemporary bioethics. The author begins by ascertaining the post-war disappearance of two Polish traditions--that of the Warsaw school of philosopher-physicians (known in the West as the Polish School of Philosophy of Medicine) and the Lwów-Warsaw School of Philosophy. The political system that come into being after 1945 was not conducive to the development of medical ethics, but several clear orientations may be discerned in the utterances of physicians, lawyers, moral technologlans and academic philosophers. The analysis begins with Catholic ethics in its archaic 1950s-vintage form. The author then presents the thinking of ethicians Independent of both the Church and Marxism (the milieu of the journal 'Etyka') as well as the deontological writings of physicians.

  3. Body conformation comparison of Czech and Polish Hucul horses

    Directory of Open Access Journals (Sweden)

    Zita Matoušová Malbohanová

    2004-01-01

    Full Text Available Measurements of 17 body measures and 11 indices of body conformation on 209 breeding individuals of the Hucul horse were used to analyse the effect of country of origin (Poland and the Czech Republic, sex (stallions and mares, age (5 classes and sire line (Gurgul, Goral, Oušor, Hroby, Polan, Pietrosu, Prislop. All horses were measured by one person. Measures and indexes were analysed by the GLM procedure. The main effect was the country of origin. Highly significant differences were found between both Polish and Czech horses in two thirds of measurements and in more than half of indices. The Czech Hucul horses are significantly higher, longer, wider in pelvis and have longer head than Polish horses. On the contrary to the Czech horses are Polish horses more compact, massive and have deeper chest. Their cannon bone in relation to height of wither is wider.

  4. Human Factors in Nuclear Power Engineering in Polish Conditions

    Directory of Open Access Journals (Sweden)

    Agnieszka Kaczmarek-Kacprzak

    2014-09-01

    Full Text Available The paper “Human factors in nuclear power engineering in Polish conditions” focuses on analysis of dynamics of preparing Polish society to build fi rst nuclear power plant in XXI century in Poland. Authors compare experience from constructing nuclear power plant Sizewell B (Great Britain and Sizewell C, which is in preparation phase with polish nuclear power program. Paper includes aspects e.g. of creating nuclear safety culture and social opinion about investment. Human factors in nuclear power engineering are as well important as relevant economical and technical factors, but very often negligible. In Poland where history about Czarnobyl is still alive, and social opinion is created on emotions after accident in Fukushima, human factors are crucial and should be under comprehensive consideration.

  5. The social shaping of innovation in polish companies

    DEFF Research Database (Denmark)

    Lorentzen, Anne

    2003-01-01

    The paper deals with strategies of innovation in Polish manufacturing companies. The point of departure is a theoretical framework of enterprise level innovation, and of the factors forming strategies of innovation on enterprise level. The paper analyses evidence from 23 Polish companies...... and presents two cases more in detail. The analysis shows that the Polish companies have all been quite innovative, mostly in relation to product innovation. They choose innovation strategies, which are incremental more than radical, and they tend to differentiate their product range rather than to specialise....... They consider quality development a must in the fight for market shares and they adapt equipment and organisation to this goal. The factors forming and determining the strategies of the companies count the technological knowledge and expertise of the owner/founder, the structural changes of the market...

  6. [The historical significance of the Polish medical faculty in Edinburgh].

    Science.gov (United States)

    Nowak, K

    1999-01-01

    The Polish Medical Faculty at the University of Edinburgh was a unique phenomenon in the history of universities. Established during the Second World War in 1941 as an entirely autonomous Polish academic institution, the Faculty trained 228 doctors and awarded 19 PhD degrees during its nine years of formal existence (1941-1949). In reviewing its almost 60-year old history, seen in the context of the involvement of the elite of both the political and academic establishments, the splendour of various celebrations and its graduates devotion in keeping the "Edinburgh experiment" alive, the author makes a case for the long-term historical and psychological significance of events well outlasting the period of formal activity of the Faculty. The history of the Faculty is well documented, but the long term outcome in terms of its lasting historical importance is gradually emerging with the passage of time. It has become an indisputable testimony to the generosity and hospitality of the Scottish (political and) academic establishment and a lasting proof of the special liaison between the Scots and the Poles. The Faculty's importance and psychological significance to the rich historical heritage of Polish medicine and the notion of patriotism and loyalty to Polishness have become apparent in the ensuing decades of its carefully maintained tradition. The existence of the Polish Medical Faculty has become an extraordinary asset in the history of Scottish universities, but for the Polish tradition both in Poland and throughout its rich diaspora it constitutes an increasingly valuable historical event which deserves to be cultivated and passed on to younger generations so that it may continue bringing further dividends, so important to national identity, achievement, dignity and pride.

  7. Verbalization the Concept of Dignity in Polish Dictionaries

    Directory of Open Access Journals (Sweden)

    Chaban Vasylyna

    2016-12-01

    Full Text Available Background: The object of the study is the concept of DIGNITY. The justification of the research is predetermined by the lack of such investigation in Polish linguistics. The background for the article is also determined by the lack of similar studies in the sphere of Cognitive Linguistics. Purpose: The article aims at analysing the cultural concept of DIGNITY in the minds of the bearers of the Polish language and culture based on the data incorporated from the lexicographical sources and collection of folk sayings and proverbs. Results: The article dwells upon the most important features of this concept in the Polish language and culture. The study investigates the language conceptualization of this concept in the system of the Polish language and folk maxims and sayings. The definition of the lexeme of dignity reveals the compliance with higher moral principles and the understanding of value; good name, good character claiming attention and respect; the last name. DIGNITY is the principal regulating mechanism of behaviour and development of positive human values which become apparent in the process of human interaction. A man of worth respects himself and is as well proud to be an honourable man. DIGNITY concerns both a separate human and the society in general; it could be regarded as both individual and collective notion. Discussion: The suggested analysis revealed cultural and linguistic peculiarities of the concept of DIGNITY in the Polish language and culture. The conducted research is not exhaustive since it provides potential perspectives for further research of the Polish concept of DIGNITY, in particular, in terms of comparative studies with correlative concepts in Ukrainian and English languages and cultures with the help of the cognitive definition method.

  8. Laser polishing of 3D printed mesoscale components

    Science.gov (United States)

    Bhaduri, Debajyoti; Penchev, Pavel; Batal, Afif; Dimov, Stefan; Soo, Sein Leung; Sten, Stella; Harrysson, Urban; Zhang, Zhenxue; Dong, Hanshan

    2017-05-01

    Laser polishing of various engineered materials such as glass, silica, steel, nickel and titanium alloys, has attracted considerable interest in the last 20 years due to its superior flexibility, operating speed and capability for localised surface treatment compared to conventional mechanical based methods. The paper initially reports results from process optimisation experiments aimed at investigating the influence of laser fluence and pulse overlap parameters on resulting workpiece surface roughness following laser polishing of planar 3D printed stainless steel (SS316L) specimens. A maximum reduction in roughness of over 94% (from ∼3.8 to ∼0.2 μm Sa) was achieved at the optimised settings (fluence of 9 J/cm2 and overlap factors of 95% and 88-91% along beam scanning and step-over directions respectively). Subsequent analysis using both X-ray photoelectron spectroscopy (XPS) and glow discharge optical emission spectroscopy (GDOES) confirmed the presence of surface oxide layers (predominantly consisting of Fe and Cr phases) up to a depth of ∼0.5 μm when laser polishing was performed under normal atmospheric conditions. Conversely, formation of oxide layers was negligible when operating in an inert argon gas environment. The microhardness of the polished specimens was primarily influenced by the input thermal energy, with greater sub-surface hardness (up to ∼60%) recorded in the samples processed with higher energy density. Additionally, all of the polished surfaces were free of the scratch marks, pits, holes, lumps and irregularities that were prevalent on the as-received stainless steel samples. The optimised laser polishing technology was consequently implemented for serial finishing of structured 3D printed mesoscale SS316L components. This led to substantial reductions in areal Sa and St parameters by 75% (0.489-0.126 μm) and 90% (17.71-1.21 μm) respectively, without compromising the geometrical accuracy of the native 3D printed samples.

  9. Anatomic breast coordinate system for mammogram analysis

    DEFF Research Database (Denmark)

    Karemore, Gopal; Brandt, S.; Karssemeijer, N.

    2011-01-01

    inside the breast. Most of the risk assessment and CAD modules use a breast region in a image centered Cartesian x,y coordinate system. Nevertheless, anatomical structure follows curve-linear trajectories. We examined an anatomical breast coordinate system that preserves the anatomical correspondence...... between the mammograms and allows extracting not only the aligned position but also the orientation aligned with the anatomy of the breast tissue structure. Materials and Methods The coordinate system used the nipple location as the point A and the border of the pectoral muscle as a line BC. The skin air...... interface was identified as a curve passing through A and intersecting the pectoral muscle line. The nipple was defined as the origin of the coordinate system. A family of second order curves were defined through the nipple and intersecting the pectoral line (AD). Every pixel location in mammogram...

  10. Anatomic Eponyms in Neuroradiology: Head and Neck.

    Science.gov (United States)

    Bunch, Paul M

    2016-10-01

    In medicine, an eponym is a word-typically referring to an anatomic structure, disease, or syndrome-that is derived from a person's name. Medical eponyms are ubiquitous and numerous. They are also at times controversial. Eponyms reflect medicine's rich and colorful history and can be useful for concisely conveying complex concepts. Familiarity with eponyms facilitates correct usage and accurate communication. In this article, 22 eponyms used to describe anatomic structures of the head and neck are discussed. For each structure, the author first provides a biographical account of the individual for whom the structure is named. An anatomic description and brief discussion of the structure's clinical relevance follow. Copyright © 2016 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.

  11. Evidence for the Existing American Nurses Association-Recognized Standardized Nursing Terminologies: A Systematic Review

    Science.gov (United States)

    Tastan, Sevinc; Linch, Graciele C. F.; Keenan, Gail M.; Stifter, Janet; McKinney, Dawn; Fahey, Linda; Dunn Lopez, Karen; Yao, Yingwei; Wilkie, Diana J.

    2014-01-01

    Objective To determine the state of the science for the five standardized nursing terminology sets in terms of level of evidence and study focus. Design Systematic Review. Data sources Keyword search of PubMed, CINAHL, and EMBASE databases from 1960s to March 19, 2012 revealed 1,257 publications. Review Methods From abstract review we removed duplicate articles, those not in English or with no identifiable standardized nursing terminology, and those with a low-level of evidence. From full text review of the remaining 312 articles, eight trained raters used a coding system to record standardized nursing terminology names, publication year, country, and study focus. Inter-rater reliability confirmed the level of evidence. We analyzed coded results. Results On average there were 4 studies per year between 1985 and 1995. The yearly number increased to 14 for the decade between 1996–2005, 21 between 2006–2010, and 25 in 2011. Investigators conducted the research in 27 countries. By evidence level for the 312 studies 72.4% were descriptive, 18.9% were observational, and 8.7% were intervention studies. Of the 312 reports, 72.1% focused on North American Nursing Diagnosis-International, Nursing Interventions Classification, Nursing Outcome Classification, or some combination of those three standardized nursing terminologies; 9.6% on Omaha System; 7.1% on International Classification for Nursing Practice; 1.6% on Clinical Care Classification/Home Health Care Classification; 1.6% on Perioperative Nursing Data Set; and 8.0% on two or more standardized nursing terminology sets. There were studies in all 10 foci categories including those focused on concept analysis/classification infrastructure (n = 43), the identification of the standardized nursing terminology concepts applicable to a health setting from registered nurses’ documentation (n = 54), mapping one terminology to another (n = 58), implementation of standardized nursing terminologies into electronic health

  12. Evolution of polish E-commerce - main trends and perspectives

    OpenAIRE

    Chodak, Grzegorz

    2008-01-01

    The aim of this paper is to present main phases of Polish e-commerce development and to show its major trends. The author also tries to predict future directions of its development. The whole e-commerce process of development is divided into five phases. The first part of the paper presents the beginnings of Polish e-commerce. Then the following stages of development are discussed with presentation of some key figures e.g. percentage of individuals who ordered goods or services over the Inter...

  13. Polish as a Foreign Language: New Context, Regulations and Prospects

    Directory of Open Access Journals (Sweden)

    Popławska Anna

    2015-10-01

    Full Text Available The article provides an overview of the developments in Poland after the collapse of communism in 1989 from the point of view of foreign language teaching, including a swift reorientation and transition from a public school system with Russian as the main foreign language, to a diversified language teaching market focused on teaching English and other languages. A particular stress is placed on a relatively new phenomenon, being an increased demand and new opportunities for teaching Polish as a foreign language to be further promoted as a result of anticipated amendments to legal regulations governing the status and certification of the Polish language.

  14. Laser polishing for topography management of accelerator cavity surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Liang [College of William and Mary, Williamsburg, VA (United States); Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Klopf, J. Mike [College of William and Mary, Williamsburg, VA (United States); Reece, Charles E. [Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States); Kelley, Michael J. [College of William and Mary, Williamsburg, VA (United States); Thomas Jefferson National Accelerator Facility (TJNAF), Newport News, VA (United States)

    2015-07-20

    Improved energy efficiency and reduced cost are greatly desired for advanced particle accelerators. Progress toward both can be made by atomically-smoothing the interior surface of the niobium superconducting radiofrequency accelerator cavities at the machine's heart. Laser polishing offers a green alternative to the present aggressive chemical processes. We found parameters suitable for polishing niobium in all surface states expected for cavity production. As a result, careful measurement of the resulting surface chemistry revealed a modest thinning of the surface oxide layer, but no contamination.

  15. Mechanistic, kinetic, and processing aspects of tungsten chemical mechanical polishing

    Science.gov (United States)

    Stein, David

    This dissertation presents an investigation into tungsten chemical mechanical polishing (CMP). CMP is the industrially predominant unit operation that removes excess tungsten after non-selective chemical vapor deposition (CVD) during sub-micron integrated circuit (IC) manufacture. This work explores the CMP process from process engineering and fundamental mechanistic perspectives. The process engineering study optimized an existing CMP process to address issues of polish pad and wafer carrier life. Polish rates, post-CMP metrology of patterned wafers, electrical test data, and synergy with a thermal endpoint technique were used to determine the optimal process. The oxidation rate of tungsten during CMP is significantly lower than the removal rate under identical conditions. Tungsten polished without inhibition during cathodic potentiostatic control. Hertzian indenter model calculations preclude colloids of the size used in tungsten CMP slurries from indenting the tungsten surface. AFM surface topography maps and TEM images of post-CMP tungsten do not show evidence of plow marks or intergranular fracture. Polish rate is dependent on potassium iodate concentration; process temperature is not. The colloid species significantly affects the polish rate and process temperature. Process temperature is not a predictor of polish rate. A process energy balance indicates that the process temperature is predominantly due to shaft work, and that any heat of reaction evolved during the CMP process is negligible. Friction and adhesion between alumina and tungsten were studied using modified AFM techniques. Friction was constant with potassium iodate concentration, but varied with applied pressure. This corroborates the results from the energy balance. Adhesion between the alumina and the tungsten was proportional to the potassium iodate concentration. A heuristic mechanism, which captures the relationship between polish rate, pressure, velocity, and slurry chemistry, is presented

  16. Implementation of the Bulgarian-Polish online dictionary

    Directory of Open Access Journals (Sweden)

    Ludmila Dimitrova

    2015-11-01

    Full Text Available Implementation of the Bulgarian-Polish online dictionary The paper describes the implementation of an online Bulgarian-Polish dictionary as a technological tool for applications in digital humanities. This bilingual digital dictionary is developed in the frame of the joint research project “Semantics and Contrastive Linguistics with a focus on a bilingual electronic dictionary” between IMI-BAS and ISS-PAS, supervised by L. Dimitrova (IMI-BAS and V. Koseska-Toszewa (ISS-PAS. In addition, the main software tools for web-presentation of the dictionary are described briefly.

  17. Confocal Raman spectrocopy for the analysis of nail polish evidence.

    Science.gov (United States)

    López-López, Maria; Vaz, Joana; García-Ruiz, Carmen

    2015-06-01

    Nail polishes are cosmetic paints that may be susceptible of forensic analysis offering useful information to assist in a crime reconstruction. Although the nail polish appearance could allow a quick visual identification of the sample, this analysis is subjected to the perception and subjective interpretation of the forensic examiner. The chemical analysis of the nail polishes offers great deal of information not subjected to analyst interpretation. Confocal Raman spectroscopy is a well-suited technique for the analysis of paints due to its non-invasive and non-destructive nature and its ability to supply information about the organic and inorganic components of the sample. In this work, 77 regular and gel nail polishes were analyzed with confocal Raman spectroscopy using two laser wavelengths (532 and 780 nm). The sample behavior under the two laser wavelengths and the differences in the spectra taken at different points of the sample were studied for each nail polish. Additionally, the spectra obtained for all the nail polishes were visually compared. The results concluded that the longer laser wavelength prevents sample burning and fluorescence effects; the similarity among the spectra collected within the sample is not directly related with the presence of glitter particles; and 64% of the samples analyzed showed a characteristic spectrum. Additionally, the use of confocal Raman spectroscopy for the forensic analysis of nail polishes evidence in the form of flakes or smudges on different surfaces were studied. The results showed that both types of evidence can be analyzed by the technique. Also, two non-invasive sampling methods for the collection of the evidence from the nails of the suspect or the victim were proposed: (i) to use acetone-soaked cotton swabs to remove the nail varnishes and (ii) to scrape the nail polish from the nail with a blade. Both approaches, each exhibiting advantages and drawbacks in terms of transport and handling were appropriate

  18. Lacrimal Gland Pathologies from an Anatomical Perspective

    Directory of Open Access Journals (Sweden)

    Mahmut Sinan Abit

    2015-06-01

    Full Text Available Most of the patients in our daily practice have one or more ocular surface disorders including conjucntivitis, keratitis, dry eye disease, meibomian gland dysfunction, contact lens related symptoms, refractive errors,computer vision syndrome. Lacrimal gland has an important role in all above mentioned pathologies due to its major secretory product. An anatomical and physiological knowledge about lacrimal gland is a must in understanding basic and common ophthalmological cases. İn this paper it is aimed to explain the lacrimal gland diseases from an anatomical perspective.

  19. Public health terminology: Hindrance to a Health in All Policies approach?

    Science.gov (United States)

    Synnevåg, Ellen S; Amdam, Roar; Fosse, Elisabeth

    2018-02-01

    National public health policies in Norway are based on a Health in All Policies (HiAP) approach. At the local level, this means that public health, as a cross-sectional responsibility, should be implemented in all municipal sectors by integrating public health policies in municipal planning and management systems. The paper investigates these local processes, focusing on the use of public health terminology and how this terminology is translated from national to local contexts. We ask whether the terms 'public health' and 'public health work' are suitable when implementing an HiAP approach. A qualitative case study based on analyses of interviews and planning documents was performed in three Norwegian municipalities. The results present dilemmas associated with using public health terminology when implementing an HiAP approach. On the one hand, the terms are experienced as wide, complex, advanced and unnecessary. On the other hand, the terms are experienced as important for a systematic approach towards understanding public health ideology and cross-sectional responsibility. One municipality used alternative terminology. This paper promotes debate about the appropriateness of using the terms 'public health' and 'public health work' at the local level. It suggests that adaptation is suitable and necessary, unless it compromises knowledge, responsibility and a systematic approach. This study concludes that the use of terminology is a central factor when implementing the Norwegian Public Health Act at the local level.

  20. Identifying Lesbian, Gay, Bisexual, and Transgender Search Terminology: A Systematic Review of Health Systematic Reviews.

    Science.gov (United States)

    Lee, Joseph G L; Ylioja, Thomas; Lackey, Mellanye

    2016-01-01

    Research on the health of lesbian, gay, bisexual, and transgender (LGBT) populations can provide important information to address existing health inequalities. Finding existing research in LGBT health can prove challenging due to the plethora of terminology used. We sought to describe existing search strategies and to identify more comprehensive LGBT search terminology. We iteratively created a search string to identify systematic reviews and meta-analyses about LGBT health and implemented it in Embase, PubMed/MEDLINE, and PsycINFO databases on May 28-29, 2015. We hand-searched the journal LGBT Health. Inclusion criteria were: systematic reviews and meta-analyses that addressed LGBT health, used systematic searching, and used independent coders for inclusion. The published search terminology in each record and search strings provided by authors on request were cross-referenced with our original search to identify additional terminology. Our search process identified 19 systematic reviews meeting inclusion criteria. The number of search terms used to identify LGBT-related records ranged from 1 to 31. From the included studies, we identified 46 new search terms related to LGBT health. We removed five search terms as inappropriate and added five search terms used in the field. The resulting search string included 82 terms. There is room to improve the quality of searching and reporting in LGBT health systematic reviews. Future work should attempt to enhance the positive predictive value of LGBT health searches. Our findings can assist LGBT health reviewers in capturing the diversity of LGBT terminology when searching.

  1. [In vivo reflectance confocal microscopy in dermatology: a proposal concerning French terminology].

    Science.gov (United States)

    Kanitakis, J; Bahadoran, P; Braun, R; Debarbieux, S; Labeille, B; Perrot, J-L; Vabres, P

    2013-11-01

    Reflectance confocal microscopy (RCM) is a recently introduced non-invasive imaging technique allowing real-time examination of the skin in vivo. Whereas a substantial literature concerning RCM exists in English, so far there is no official terminology in French, despite the fact that an ever-growing number of French-speaking dermatologists now use this new imaging technique. The aim of the present study is to propose a French terminology for RCM in order to allow French-speaking dermatologists to communicate in a precise and homogeneous language on this topic. A group of French-speaking dermatologists with solid experience of RCM, members of the Non-invasive Cutaneous Imaging group of the French Society of Dermatology, endeavored to suggest terms in French concerning RCM. Each group member dealt with a specific paragraph. The members exchanged comments via email and the terminology was finalized during a meeting of the group members in Paris in June 2012. Descriptive terms referring to the RCM aspects of normal and diseased skin were proposed. Some of these already existed, being used in routine dermatopathology, while other specific terms were created or adapted from the English terminology. This terminology will allow French-speaking dermatologists using RCM to communicate their findings in a homogeneous language. It may be enriched in the future by the introduction of additional terms describing new aspects of both normal and, especially, diseased skin. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

  2. Removing Mid-Spatial Frequency (MSF) Errors Using Stress-Polishing Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This IRAD proposes to evaluate how stress polishing can be used to extend the application of super-polishing to fast aspheres and freeforms, removing sub-aperture...

  3. Bibliography of English-Polish Contrastive Studies in Poland (as of August 1976).

    Science.gov (United States)

    Mieszek, Aleksandra

    This bibliography lists books, articles, papers, theses and dissertations describing English-Polish contrastive studies conducted in Poland. There are 403 works listed in both languages, divided into two groups: General Works and English-Polish Contrastive Studies. (CHK)

  4. A Reinforcement-Based Learning Paradigm Increases Anatomical Learning and Retention—A Neuroeducation Study

    Science.gov (United States)

    Anderson, Sarah J.; Hecker, Kent G.; Krigolson, Olave E.; Jamniczky, Heather A.

    2018-01-01

    In anatomy education, a key hurdle to engaging in higher-level discussion in the classroom is recognizing and understanding the extensive terminology used to identify and describe anatomical structures. Given the time-limited classroom environment, seeking methods to impart this foundational knowledge to students in an efficient manner is essential. Just-in-Time Teaching (JiTT) methods incorporate pre-class exercises (typically online) meant to establish foundational knowledge in novice learners so subsequent instructor-led sessions can focus on deeper, more complex concepts. Determining how best do we design and assess pre-class exercises requires a detailed examination of learning and retention in an applied educational context. Here we used electroencephalography (EEG) as a quantitative dependent variable to track learning and examine the efficacy of JiTT activities to teach anatomy. Specifically, we examined changes in the amplitude of the N250 and reward positivity event-related brain potential (ERP) components alongside behavioral performance as novice students participated in a series of computerized reinforcement-based learning modules to teach neuroanatomical structures. We found that as students learned to identify anatomical structures, the amplitude of the N250 increased and reward positivity amplitude decreased in response to positive feedback. Both on a retention and transfer exercise when learners successfully remembered and translated their knowledge to novel images, the amplitude of the reward positivity remained decreased compared to early learning. Our findings suggest ERPs can be used as a tool to track learning, retention, and transfer of knowledge and that employing the reinforcement learning paradigm is an effective educational approach for developing anatomical expertise. PMID:29467638

  5. A Reinforcement-Based Learning Paradigm Increases Anatomical Learning and Retention-A Neuroeducation Study.

    Science.gov (United States)

    Anderson, Sarah J; Hecker, Kent G; Krigolson, Olave E; Jamniczky, Heather A

    2018-01-01

    In anatomy education, a key hurdle to engaging in higher-level discussion in the classroom is recognizing and understanding the extensive terminology used to identify and describe anatomical structures. Given the time-limited classroom environment, seeking methods to impart this foundational knowledge to students in an efficient manner is essential. Just-in-Time Teaching (JiTT) methods incorporate pre-class exercises (typically online) meant to establish foundational knowledge in novice learners so subsequent instructor-led sessions can focus on deeper, more complex concepts. Determining how best do we design and assess pre-class exercises requires a detailed examination of learning and retention in an applied educational context. Here we used electroencephalography (EEG) as a quantitative dependent variable to track learning and examine the efficacy of JiTT activities to teach anatomy. Specifically, we examined changes in the amplitude of the N250 and reward positivity event-related brain potential (ERP) components alongside behavioral performance as novice students participated in a series of computerized reinforcement-based learning modules to teach neuroanatomical structures. We found that as students learned to identify anatomical structures, the amplitude of the N250 increased and reward positivity amplitude decreased in response to positive feedback. Both on a retention and transfer exercise when learners successfully remembered and translated their knowledge to novel images, the amplitude of the reward positivity remained decreased compared to early learning. Our findings suggest ERPs can be used as a tool to track learning, retention, and transfer of knowledge and that employing the reinforcement learning paradigm is an effective educational approach for developing anatomical expertise.

  6. A Reinforcement-Based Learning Paradigm Increases Anatomical Learning and Retention—A Neuroeducation Study

    Directory of Open Access Journals (Sweden)

    Sarah J. Anderson

    2018-02-01

    Full Text Available In anatomy education, a key hurdle to engaging in higher-level discussion in the classroom is recognizing and understanding the extensive terminology used to identify and describe anatomical structures. Given the time-limited classroom environment, seeking methods to impart this foundational knowledge to students in an efficient manner is essential. Just-in-Time Teaching (JiTT methods incorporate pre-class exercises (typically online meant to establish foundational knowledge in novice learners so subsequent instructor-led sessions can focus on deeper, more complex concepts. Determining how best do we design and assess pre-class exercises requires a detailed examination of learning and retention in an applied educational context. Here we used electroencephalography (EEG as a quantitative dependent variable to track learning and examine the efficacy of JiTT activities to teach anatomy. Specifically, we examined changes in the amplitude of the N250 and reward positivity event-related brain potential (ERP components alongside behavioral performance as novice students participated in a series of computerized reinforcement-based learning modules to teach neuroanatomical structures. We found that as students learned to identify anatomical structures, the amplitude of the N250 increased and reward positivity amplitude decreased in response to positive feedback. Both on a retention and transfer exercise when learners successfully remembered and translated their knowledge to novel images, the amplitude of the reward positivity remained decreased compared to early learning. Our findings suggest ERPs can be used as a tool to track learning, retention, and transfer of knowledge and that employing the reinforcement learning paradigm is an effective educational approach for developing anatomical expertise.

  7. Simulation and analysis of an alternative kinematics for improving the polishing uniformity over the surface of polished tiles

    Directory of Open Access Journals (Sweden)

    Weingaertner, W. L.

    2010-10-01

    Full Text Available The present work investigates the possibility of adopting a new kinematics at the industrial polishing lines of porcelain stoneware tile. An alternative motion of the transverse oscillation of the polishing heads is proposed, in which no radical changes in the industries facilities are required. The basic idea is to replace the purely sinus motion of the polishing heads by a rather trapezoid wavelike motion. In theory this could be achieved simply by adopting regular delays at the transverse oscillation motion. Consequences of this alternative kinematics were quantitatively analyzed considering the spatial homogeneity of polishing expected for tiles. Such homogeneity was represented by the coefficient of variation of the distribution of polishing time over the surface, which was in turn determined by means of computational simulations, taking into account the effect of multiple polishing heads.

    El presente trabajo investiga la posibilidad de adoptar una nueva cinemática en las líneas de pulido industrial de baldosas de gres porcelánico. Se propone una propuesta alternativa de la oscilación transversal de los cabezales pulidores, en el que no hay cambios radicales en las instalaciones de las industrias son necesarias. La idea básica consiste en sustituir el movimiento totalmente del seno de los cabezales pulidores por un movimiento ondulatorio trapezoide. En teoría, esto podría lograrse sólo mediante la adopción de los habituales retrasos en el movimiento de oscilación transversal. las consecuencias de esta cinemática fueron analizados cuantitativamente, teniendo en cuenta la homogeneidad espacial de pulido. Tal homogeneidad fora representada por el coeficiente de variación de la distribución de lo tiempo de pulido en la superficie, determinada por medio de simulaciones computacionales, teniendo también en cuenta el efecto de pulido de las cabezas múltiples.

  8. Terminology-based documentation systems: a systemantic comparison of four different approaches.

    Science.gov (United States)

    Ngouongo, Sylvie M N; Stausberg, Jürgen

    2013-01-01

    The supplementation of documentation systems with controlled vocabularies is a prerequisite for improved and consistent communication, high data quality and efficient data exchange. To outline the requirements of an application system which supports the terminology-based development of documentation systems, existing documentation systems offering a terminological support in the definition of item collections were retrieved in the literature and analyzed. The analysis of four selected documentation systems caused us to define four main criteria for a terminology-based documentation system, which are: use of a controlled vocabulary, definition of a characteristic level, the definition of a value domain level and definition of roles and entities to combine vocabulary, characteristic and value domain levels together.

  9. The Naueti relationship terminology: A new instance of asymmetric prescription from East Timor

    Directory of Open Access Journals (Sweden)

    David Hicks

    2008-12-01

    Full Text Available Relationship terminologies of an asymmetric prescriptive character are widespread throughout mainland and insular Southeast Asia. Their western limit is marked by the Kachin of northern Burma (Leach 1961:28-53 while their eastern limit is marked by the Mambai people of central East Timor (Figures 1 and 2. Between these limits are such other instances as occur, for example, among the Lamet of Cambodia (Needham 1960, the various Batak groups of Sumatra (Rodgers 1984, and the Rindi of eastern Sumba (Forth 1981. The principal intention of the present paper is to establish the existence of a new asymmetric prescriptive terminology in East Timor, and by doing so provide empirical justification for adjusting the easternmost limits of nomenclatures of this kind. A subsidiary intent is to offer a contribution to current speculations regarding the transformation of relationship terminologies in eastern Indonesia (Guermonprez 1998; Smedal 2002.

  10. Doha agreement meeting on terminology and definitions in groin pain in athletes

    DEFF Research Database (Denmark)

    Weir, Adam; Brukner, Peter; Delahunt, Eamonn

    2015-01-01

    BACKGROUND: Heterogeneous taxonomy of groin injuries in athletes adds confusion to this complicated area. AIM: The 'Doha agreement meeting on terminology and definitions in groin pain in athletes' was convened to attempt to resolve this problem. Our aim was to agree on a standard terminology, along...... with accompanying definitions. METHODS: A one-day agreement meeting was held on 4 November 2014. Twenty-four international experts from 14 different countries participated. Systematic reviews were performed to give an up-to-date synthesis of the current evidence on major topics concerning groin pain in athletes......-related, inguinal-related and pubic-related groin pain. 2. Hip-related groin pain. 3. Other causes of groin pain in athletes. The definitions are included in this paper. CONCLUSIONS: The Doha agreement meeting on terminology and definitions in groin pain in athletes reached a consensus on a clinically based...

  11. Present and future role of chemical mechanical polishing in wafer bonding

    NARCIS (Netherlands)

    Gui, C.; Elwenspoek, Michael Curt; Gardeniers, Johannes G.E.; Lambeck, Paul

    Almost all direct wafer bonding has been conducted between chemical-mechanically polished substrates or between thin films that were present on top of the polished substrates. Introducing chemical mechanical polishing in the wafer bonding will make a large range of materials suitable for direct

  12. Development of a multisensory arm for process monitoring in Robot Assisted Polishing

    DEFF Research Database (Denmark)

    Pilny, Lukas; Dalla Costa, Giuseppe; Bissacco, Giuliano

    2015-01-01

    Robot Assisted Polishing (RAP) process is capable of achieving surface roughness down to Sa 10 nm on industrial components. In RAP, a robot arm carries a polishing module with controlled contact force utilizing oscillating or rotating tools. In this work a multisensory polishing arm with integrated...

  13. Influence of the brittle behavior of work materials on polishing characteristics

    Science.gov (United States)

    Sakamoto, Satoshi; Gemma, Masaya; Hayashi, Keitoku; Kondo, Yasuo; Yamaguchi, Kenji; Yakou, Takao; Arakawa, Susumu

    2017-09-01

    Diamond electrodeposited wire tools are frequently used to cut thin wafers from hard and brittle materials. However, microcracks sometimes appear during the slicing process. The appearance of microcracks adversely affects slicing efficiency and slicing accuracy. In this study, we examine the influence of brittle behavior on the polishing characteristics such as polishing depth and tool wear. This is the first step toward investigating the influence of the brittle behavior of work materials on slicing characteristics. Ceramics such as alumina, silicon carbide, and zirconia are used as work materials. Even with the same degree of hardness, we found that the polishing depth values were greater for materials exhibiting brittle behavior. In the polishing of high-hardness materials, abrasive grains were badly damaged during the initial stages of polishing. Damage to the abrasive paper was less in wet polishing as compared with dry polishing. Moreover, wet polishing had a greater polishing depth than dry polishing. The polishing characteristics of the brittle materials were similar to the grooving characteristics produced using wire tools; however, both these characteristics depend on the brittle behavior of the work materials. Therefore, by performing simple polishing tests, estimating the state of grooving or slicing using wire tools is possible.

  14. Patterns of Language Use: Polish Migrants from the 1980s and Their Children in Melbourne

    Science.gov (United States)

    Leuner, Beata

    2010-01-01

    This paper investigates the retention of Polish language and culture by first generation Polish migrants from the 1980s and their second generation offspring (aged 15-24) from endogamous and exogamous marriages. We examine various domains such as the home, social networks, visits to Poland, institutions of learning, the Polish media, the Polish…

  15. Polish Migrant Parents of Secondary School Boys in the United Kingdom

    Science.gov (United States)

    Tkacz, Daria; McGhee, Derek

    2016-01-01

    This article focuses on the parents of secondary school Polish boys and their capacity to realise their educational and professional aspirations for their children. Our primary finding is that although many Polish parents face considerable challenges in manoeuvring through the educational system, some Polish parents display a level of agency…

  16. Anatomical and palynological characteristics of Salvia willeana ...

    African Journals Online (AJOL)

    USER

    2010-04-05

    Apr 5, 2010 ... investigated in this study and the findings obtained were compared with other studies conducted on Salvia genus. Metcalfe and Chalk (1950) found the data on the anatomical characteristics of S. species. These researchers revealed that the species belonging to Labiatae family usually have rectangle or ...

  17. Descriptions of anatomical differences between skulls and ...

    African Journals Online (AJOL)

    The external anatomical differences between the skulls and mandibles of 10 mountain zebras Equus zebra and 10 plains zebras E. burchelli of both sexes were studied. The nomenclature used conforms to Nomina Anatomica Veterinaria (1983). Eleven structural differences are described for the first time and illustrated, viz., ...

  18. HPV Vaccine Effective at Multiple Anatomic Sites

    Science.gov (United States)

    A new study from NCI researchers finds that the HPV vaccine protects young women from infection with high-risk HPV types at the three primary anatomic sites where persistent HPV infections can cause cancer. The multi-site protection also was observed at l

  19. Report of a rare anatomic variant

    DEFF Research Database (Denmark)

    De Brucker, Y; Ilsen, B; Muylaert, C

    2015-01-01

    We report the CT findings in a case of partial anomalous pulmonary venous return (PAPVR) from the left upper lobe in an adult. PAPVR is an anatomic variant in which one to three pulmonary veins drain into the right atrium or its tributaries, rather than into the left atrium. This results in a lef...

  20. Morphological and anatomical response of Acacia ehrenbergiana ...

    African Journals Online (AJOL)

    Both species responded morphologically as well as anatomically to water stress. Water stress caused significant (P=0.05) decrease in relative water content, leaf number and area and leaf water potential, chlorophyll content, and stem height and diameter. Seedlings of both species responded to water stress by the ...